Progress and challenges to the global waste management system.

Science.gov (United States)

Singh, Jagdeep; Laurenti, Rafael; Sinha, Rajib; Frostell, Björn

2014-09-01

Rapid economic growth, urbanization and increasing population have caused (materially intensive) resource consumption to increase, and consequently the release of large amounts of waste to the environment. From a global perspective, current waste and resource management lacks a holistic approach covering the whole chain of product design, raw material extraction, production, consumption, recycling and waste management. In this article, progress and different sustainability challenges facing the global waste management system are presented and discussed. The study leads to the conclusion that the current, rather isolated efforts, in different systems for waste management, waste reduction and resource management are indeed not sufficient in a long term sustainability perspective. In the future, to manage resources and wastes sustainably, waste management requires a more systems-oriented approach that addresses the root causes for the problems. A specific issue to address is the development of improved feedback information (statistics) on how waste generation is linked to consumption. © The Author(s) 2014.

Data Acquisition and Transmission System for Building Energy Consumption Monitoring

Directory of Open Access Journals (Sweden)

Liang Zhao

2013-01-01

Full Text Available Building energy consumption monitoring and management system have been developed widely in China in order to gain the real-time data of energy consumption in buildings for analyzing it in the next state work. This paper describes a low-cost and small-sized collector based on the STM32 microcontroller, which can be placed in a building easily to implement the work of data acquisition, storage, and transmission. The collector gathers the electricity, water, heat, and energy consumption data through the RS485 field bus and stores the data into an SD card with mass storage, finally, using Internet to finish the communication and transmission to data server through TCP protocol. The collector has been used in application for two years, and the results show that the system is reliable and stable.

Introductory analysis of sustainable consumption and production : Factors of corporate social responsibility management in Japan

OpenAIRE

八木, 迪幸; 國部, 克彦

2017-01-01

As an introductory analysis of sustainable consumption and production, this paper examines what factors influence corporate social responsibility management in Japan. Following some underlying theories (management control system; the neo-institutional theory; performance measurement systems; the stakeholder theory; the resource dependence theory), this paper conducts empirical studies using firm-level data. The first three studies examine what factors encourage corporate social responsibility...

Management options for food production systems affected by a nuclear accident. Task 3: diversion of crops grown for human consumption to animal feed

International Nuclear Information System (INIS)

Brown, J.; Wilkins, B.T.; Nisbet, A.F.

2002-01-01

This report forms part of a series describing a study to evaluate selected options for the management of food production systems affected by a nuclear accident. This report considers the scope for the redirection of contaminated foods grown for human consumption to animal feeds and addresses whether crops grown for human consumption can be used as animal feeds for animal production systems; what the likely impact on contamination levels in animal products is; whether amounts of waste food could be reduced in the event of a nuclear accident; and whether the option is acceptable to the farming industry, retail trade and consumers. The study identified that foods intended for human consumption can be used as animal feeds for beef cattle and sheep and, to a limited extent, for breeding sows but it is essential that a suitable nutritional balance is maintained. The scope to provide suitable alternative diets is, however, limited and is dependent upon the time of year at which the deposition occurs. If crops were contaminated at the relevant CFIL, not all of the alternative diets considered would result in animal products that were below the corresponding CFIL value, thus limiting any benefit in implementing the option. Except possibly in the most extreme of circumstances, this management option would not be considered acceptable by consumers or by the retail trade and farmers would only implement such a measure if there was a suitable market for the resultant produce. This work was undertaken under the Environmental Assessments Department and Emergency Response Group's Quality Management System, which has been approved by Lloyd's Register Quality Assurance to the Quality Management Standards ISO 9001:2000 and TickIT Guide Issue 5, certificate number 956546. (author)

The art of software thermal management for embedded systems

CERN Document Server

Benson, Mark

2014-01-01

This book introduces Software Thermal Management (STM) as a means of reducing power consumption in a computing system, in order to manage heat, improve component reliability, and increase system safety.  Readers will benefit from this pragmatic guide to the field of STM for embedded systems and its catalog of software power management techniques.  Since thermal management is a key bottleneck in embedded systems design, this book focuses on power as the root cause of heat. Since software has an enormous impact on power consumption in an embedded system, this book guides readers to manage heat effectively by understanding, categorizing, and developing new ways to reduce dynamic power. Whereas most books on thermal management describe mechanisms to remove heat, this book focuses on ways to avoid generating heat in the first place.   • Explains fundamentals of software thermal management, application techniques and advanced optimization strategies; • Describes a novel method for managing dynamic power, e...

Analysis of the maximal possible grid relief from PV-peak-power impacts by using storage systems for increased self-consumption

International Nuclear Information System (INIS)

Moshövel, Janina; Kairies, Kai-Philipp; Magnor, Dirk; Leuthold, Matthias; Bost, Mark; Gährs, Swantje; Szczechowicz, Eva; Cramer, Moritz; Sauer, Dirk Uwe

2015-01-01

Highlights: • Presentation of a MATLAB battery storage model. • Development of a controlled persistence forecast management strategy. • Perfect forecast in comparison to an easy feasible persistence forecast. • More grid relief with forecast than with strategies to maximize self-consumption. - Abstract: For future energy supply systems the effects and benefits of battery storage systems in households with photovoltaic (PV) generators and the effects on distribution and transmission grids need to be identified and analyzed. The development of grid relieving management strategies for the storage system in due consideration of self-consumption is a necessary step forward in order to analyze the potential of private home battery storage systems to reduce stress on the power supply system. A MATLAB-based model of a lithium-ion storage system has been developed. The model is applicable for a wide range of PV generator sizes, different battery storage systems and diverse management strategies. In order to identify the potential of grid relieving forecast strategies, without discharging the storage into the grid, a management strategy based on persistence forecasts of solar radiation and household load demand has been implemented and analyzed. To minimize forecast uncertainties a proportional plus integral controller has been developed. The persistence forecast management strategy is applicable in real-life PV-battery-systems and due to the simple forecast it is easy to equip existing systems with such a management system with only low effort. As a result it will be shown that a storage system management based on forecasts has a significantly higher potential to relieve the grid than a system that only maximizes self-consumption as it is usually used nowadays. Besides, such a management strategy is able to unload the grid more than a static power reduction to 70% of the nominal power rating according to the current German Renewable Energy Sources Act (EEG). At the

Urban Systems and Energy Consumptions: A Critical Approach

Directory of Open Access Journals (Sweden)

Rocco Papa

2014-05-01

Full Text Available City transformations are also due to the development of new energy sources, which have influenced economy and lifestyles, as well as the physical and functional organization of urban systems. Cities are the key place where it is need to act for the achievement of strategic environmental objectives, such as reducing greenhouse gas emissions and energy saving. The hard resolution of these challenges depends on several factors: their multidimensional nature, the change of the economic and settlement development model, and also the complexity of the relationships between the elements that constitute the urban systems and that affect energy consumption. According to this awareness the Project Smart Energy Master for the energy management of territory financed by PON 04A2_00120 R & C Axis II, from 2012 to 2015 has been developed: it is aimed at supporting local authorities in the development of strategies for the reduction of energy consumption through actions designed to change behavior (in terms of use and energy consumption and to improve the energy efficiency of equipment and infrastructure. With the goal of describing some of the results of the methodological phase of this project, this paper proposes a review of the major studies on the issue of energy consumption at the urban scale in the first section; in the second section the outcomes of the first phase of the development of the comprehension/interpretive model related to the identification of the set of physical/environmental variables at urban scale, that most affect the energy consumption, are described; the third makes a critical review of the reference scientific literature, characterised by a too sectoral approach, compared to the complexity of the topic.

Knowledge network model of the energy consumption in discrete manufacturing system

Science.gov (United States)

Xu, Binzi; Wang, Yan; Ji, Zhicheng

2017-07-01

Discrete manufacturing system generates a large amount of data and information because of the development of information technology. Hence, a management mechanism is urgently required. In order to incorporate knowledge generated from manufacturing data and production experience, a knowledge network model of the energy consumption in the discrete manufacturing system was put forward based on knowledge network theory and multi-granularity modular ontology technology. This model could provide a standard representation for concepts, terms and their relationships, which could be understood by both human and computer. Besides, the formal description of energy consumption knowledge elements (ECKEs) in the knowledge network was also given. Finally, an application example was used to verify the feasibility of the proposed method.

INTEGRATED WEED MANAGEMENT ON THE PROCESSING TOMATO CROP AND TOMATO FOR CONSUMPTION IN NATURA

Directory of Open Access Journals (Sweden)

Y. O. Castro

2016-11-01

Full Text Available Weeds cause direct and indirect damage to processing tomato and tomato for consumption in natura. The coexistence period is decisive for the intensity of damage, although the economic cost is also considered for decision making when to control the weeds. There are similarities between processing tomato and tomato for consumption in natura cropping system and peculiarities. This causes the management has adopted its common applications and its variables within each system. As control alternative, the farmer has basically the preventive control, mechanical, cultural, biological and chemical. The application of a single method is not recommended. Ideally, the methods needs to be integrated in order to combat weeds, highly evolved populations and resistant to unfavorable conditions. Consider weed management taking only one control measure is to underestimate the evolutionary ability of such species. Therefore, it is necessary to integrate the various methods available to the weed interference not impede the tomato production.

Beverage consumption and adult weight management: A review.

Science.gov (United States)

Dennis, Elizabeth A; Flack, Kyle D; Davy, Brenda M

2009-12-01

Total energy consumption among United States adults has increased in recent decades, and energy-containing beverages are a significant contributor to this increase. Because beverages are less satiating than solid foods, consumption of energy-containing beverages may increase energy intake and lead to weight gain; trends in food and beverage consumption coinciding with increases in overweight and obesity support this possibility. The purpose of this review is to present what is known about the effect of beverage consumption on short-term (i.e., meal) energy intake, as well as longer-term effects on body weight. Specific beverages addressed include water, other energy-free beverages (diet soft drinks, coffee and tea), and energy-containing beverages (soft drinks, juices and juice drinks, milk and soy beverages, alcohol). Existing evidence, albeit limited, suggests that encouraging water consumption, and substituting water and other energy-free beverages (diet soft drinks, coffee and tea) for energy-containing beverages may facilitate weight management. Energy-containing beverages acutely increase energy intake, however long-term effects on body weight are uncertain. While there may be health benefits for some beverage categories, additional energy provided by beverages should be compensated for by reduced consumption of other foods in the diet.

Energy consumption and management in metal heat treatment implementation; Consommation et gestion d`energie dans la mise en oeuvre des traitements thermiques des metaux

Energy Technology Data Exchange (ETDEWEB)

Leroux, C. [Vide et Traitements Services, 92 - Gennevilliers (France)

1996-12-31

Energy management in the metal heat treatment sector, where thermal efficiency is generally poor, is based on an adequate power supply contract with utilities, a thorough evaluation of energy consumption from the various equipment, and systems for the limitation of energy consumption: warning signals when the contracted power is to be reached, power cut-off systems or intelligent cut-off/restart systems and global load management. For gas appliances, heat recovery combustors may be a solution

Alcohol consumption and sport: a cross-sectional study of alcohol management practices associated with at-risk alcohol consumption at community football clubs.

Science.gov (United States)

Kingsland, Melanie; Wolfenden, Luke; Rowland, Bosco C; Gillham, Karen E; Kennedy, Vanessa J; Ramsden, Robyn L; Colbran, Richard W; Weir, Sarah; Wiggers, John H

2013-08-16

Excessive alcohol consumption is responsible for considerable harm from chronic disease and injury. Within most developed countries, members of sporting clubs participate in at-risk alcohol consumption at levels above that of communities generally. There has been limited research investigating the predictors of at-risk alcohol consumption in sporting settings, particularly at the non-elite level. The purpose of this study was to examine the association between the alcohol management practices and characteristics of community football clubs and at-risk alcohol consumption by club members. A cross sectional survey of community football club management representatives and members was conducted. Logistic regression analysis (adjusting for clustering by club) was used to determine the association between the alcohol management practices (including alcohol management policy, alcohol-related sponsorship, availability of low- and non-alcoholic drinks, and alcohol-related promotions, awards and prizes) and characteristics (football code, size and location) of sporting clubs and at-risk alcohol consumption by club members. Members of clubs that served alcohol to intoxicated people [OR: 2.23 (95% CI: 1.26-3.93)], conducted 'happy hour' promotions [OR: 2.84 (95% CI: 1.84-4.38)] or provided alcohol-only awards and prizes [OR: 1.80 (95% CI: 1.16-2.80)] were at significantly greater odds of consuming alcohol at risky levels than members of clubs that did not have such alcohol management practices. At-risk alcohol consumption was also more likely among members of clubs with less than 150 players compared with larger clubs [OR:1.45 (95% CI: 1.02-2.05)] and amongst members of particular football codes. The findings of this study suggest a need and opportunity for the implementation of alcohol harm reduction strategies targeting specific alcohol management practices at community football clubs.

ALGORITHMS FOR TRAFFIC MANAGEMENT IN THE INTELLIGENT TRANSPORT SYSTEMS

Directory of Open Access Journals (Sweden)

Andrey Borisovich Nikolaev

2017-09-01

Full Text Available Traffic jams interfere with the drivers and cost billions of dollars per year and lead to a substantial increase in fuel consumption. In order to avoid such problems the paper describes the algorithms for traffic management in intelligent transportation system, which collects traffic information in real time and is able to detect and manage congestion on the basis of this information. The results show that the proposed algorithms reduce the average travel time, emissions and fuel consumption. In particular, travel time has decreased by about 23%, the average fuel consumption of 9%, and the average emission of 10%.

Calculations of energy consumption in ventilation systems

Energy Technology Data Exchange (ETDEWEB)

Kreslins, Andris; Ramata, Anna [Riga Technical University (Latvia)], e-mail: kreslins@rbf.rtu.lv, email: Anna.Ramata@rtu.lv

2011-07-01

Energy cost is an important economic factor in the food industry production process. With the rising price of energy, a reduction in energy consumption would greatly impact production and the end product. The aim of this study was to develop a methodology for optimizing energy consumption. A comparison between a traditional ventilation system and a mechanical system was carried out; the necessary enthalpy for heating the air supply and thermal energy consumption were calculated and compared for both systems during the heating season, from October to April, using climatological data for Latvia. Results showed that energy savings of 46% to 87% can be achieved by applying the methodology in the design of industrial buildings; in addition, a well-designed ventilation system increases the workers' productivity. This study presented a methodology which can optimize energy consumption in the food industry sector.

Design of intelligent power consumption optimization and visualization management platform for large buildings based on internet of things

Directory of Open Access Journals (Sweden)

Gong Shulan

2017-01-01

Full Text Available The buildings provide a significant contribution to total energy consumption and CO2 emission. It has been estimated that the development of an intelligent power consumption monitor and control system will result in about 30% savings in energy consumption. This design innovatively integrates the advanced technologies such as the internet of things, the internet, intelligent buildings and intelligent electricity which can offer open, efficient, convenient energy consumption detection platform in demand side and visual management demonstration application platform in power enterprises side. The system was created to maximize the effective and efficient the use of energy resource. It was development around sensor networks and intelligent gateway and the monitoring center software. This will realize the highly integration and comprehensive application in energy and information to meet the needs with intelligent buildings

SSCL-PDSF Data Management System

International Nuclear Information System (INIS)

Allen, J.L.

1992-09-01

Physics and detector simulations at the Superconducting Super Collider Laboratory (SSCL) are performed on a heterogeneous network of RISC based workstations named the Physics and Detector Simulation Facility (PDSF). These simulations can be characterized by the consumption and generation of large amounts of data. It is clear that on-line disk storage must be supplemented by off-line tape storage. For the PDSF, an 8-mm tape robot system was initially chosen in order to provide tertiary data storage based on its compactness and low cost. In order to manage this data, the Physics Computing Department designed the Data Management System (DMS)

The network-based energy management system for convenience stores

Energy Technology Data Exchange (ETDEWEB)

Wang, An-Ping; Hsu, Pau-Lo [Department of Electrical and Control Engineering, National Chiao-Tung University, 1001 Ta-Hsiue Road, Hsinchu City 310 (China)

2008-07-01

Convenience stores generally consume energy higher than other retailing merchants. As the problem of energy shortage becomes more serious during summer, almost all convenience stores sign a contract with power plants, which provides for fines if demand limiting occurs in Taiwan and many other countries. Therefore, a reliable and effective method to reduce their utility consumption is required for modern business and industry. This research integrates the remote sensors, the control network, and the embedded system technologies to construct a distributed energy management control system for dedicated convenience stores. Energy consumption can thus be reasonably managed with demand limits by measuring and analyzing the power consumption sources in four major subsystems of convenience stores, namely, (1) air-conditioning, (2) lighting, (3) heating, and (4) refrigeration. By applying the proposed demand prediction and control method, the demand limiting condition can be properly predicted, and the possible peak load can thus be eliminated via the network control mechanism. Moreover, by integrating the LonWork fieldbus and the WinCE operating system (OS), the proposed system has been successfully applied to a convenience store. The experimental results indicate that the proposed distributed energy management system suitably predicts the peak loading condition and successfully prevents its occurrence by switching the air-conditioning system without affecting the indoor temperature regulation. (author)

Study of Intelligent Secure Chemical Inventory Management System

Science.gov (United States)

Shukran, Mohd Afizi Mohd; Naim Abdullah, Muhammad; Nazri Ismail, Mohd; Maskat, Kamaruzaman; Isa, Mohd Rizal Mohd; Shahfee Ishak, Muhammad; Adib Khairuddin, Muhamad

2017-08-01

Chemical inventory management system has been experiencing a new revolution from traditional inventory system which is manual to an automated inventory management system. In this paper, some review of the classic and modern approaches to chemical inventory management system has been discussed. This paper also describe about both type of inventory management. After a comparative analysis of the traditional method and automated method, it can be said that both methods have some distinctive characteristics. Moreover, the automated inventory management method has higher accuracy of calculation because the calculations are handled by software, eliminating possible errors and saving time. The automated inventory system also allows users and administrators to track the availability, location and consumption of chemicals. The study of this paper can provide forceful review analysis support for the chemical inventory management related research.

The effectiveness of energy management system on energy efficiency in the building

Science.gov (United States)

Julaihi, F.; Ibrahim, S. H.; Baharun, A.; Affendi, R.; Nawi, M. N. M.

2017-10-01

Energy plays a key role in achieving the desired economic growth for the country. Worldwide industries use 40 percent energy for material and consumption protection to fulfil human needs which contributes almost 37 percent of global greenhouse gases emissions. One of the approach in order to reduce the emission of greenhouse gases to the environment is by conserving energy. This could be executed by implementing energy management especially in commercial and office buildings as daily electricity consumption is high in this type of building. Energy management can also increase the efficiency of energy in the building. Study has been conducted to investigate the performance on implementation of energy management system in office building. Energy management is one of the contemporary challenges, thus study adopts an exploratory approach by using a tool developed by UNIDO called EnMS or Energy Management System. Findings show that by implementing energy management can reduce electricity consumption up to 30%. However, serious initiatives by the organization are needed to promote the effectiveness of energy management.

A systems approach to reduce urban rail energy consumption

International Nuclear Information System (INIS)

González-Gil, A.; Palacin, R.; Batty, P.; Powell, J.P.

2014-01-01

Highlights: • An insightful overview of energy usage in urban rail systems is given. • The principal measures to reduce urban rail energy consumption are appraised. • A methodology is proposed to help implement energy saving schemes in urban rail. • Regenerative braking is shown to offer the greatest energy saving potential. - Abstract: There is increasing interest in the potential of urban rail to reduce the impact of metropolitan transportation due to its high capacity, reliability and absence of local emissions. However, in a context characterised by increasing capacity demands and rising energy costs, and where other transport modes are considerably improving their environmental performance, urban rail must minimise its energy use without affecting its service quality. Urban rail energy consumption is defined by a wide range of interdependent factors; therefore, a system wide perspective is required, rather than focusing on energy savings at subsystem level. This paper contributes to the current literature by proposing an holistic approach to reduce the overall energy consumption of urban rail. Firstly, a general description of this transport mode is given, which includes an assessment of its typical energy breakdown. Secondly, a comprehensive appraisal of the main practices, strategies and technologies currently available to minimise its energy use is provided. These comprise: regenerative braking, energy-efficient driving, traction losses reduction, comfort functions optimisation, energy metering, smart power management and renewable energy micro-generation. Finally, a clear, logical methodology is described to optimally define and implement energy saving schemes in urban rail systems. This includes general guidelines for a qualitative assessment and comparison of measures alongside a discussion on the principal interdependences between them. As a hypothetical example of application, the paper concludes that the energy consumption in existing urban

Analysis of electric energy consumption of automatic milking systems in different configurations and operative conditions.

Science.gov (United States)

Calcante, Aldo; Tangorra, Francesco M; Oberti, Roberto

2016-05-01

Automatic milking systems (AMS) have been a revolutionary innovation in dairy cow farming. Currently, more than 10,000 dairy cow farms worldwide use AMS to milk their cows. Electric consumption is one of the most relevant and uncontrollable operational cost of AMS, ranging between 35 and 40% of their total annual operational costs. The aim of the present study was to measure and analyze the electric energy consumption of 4 AMS with different configurations: single box, central unit featuring a central vacuum system for 1 cow unit and for 2 cow units. The electrical consumption (daily consumption, daily consumption per cow milked, consumption per milking, and consumption per 100L of milk) of each AMS (milking unit + air compressor) was measured using 2 energy analyzers. The measurement period lasted 24h with a sampling frequency of 0.2Hz. The daily total energy consumption (milking unit + air compressor) ranged between 45.4 and 81.3 kWh; the consumption per cow milked ranged between 0.59 and 0.99 kWh; the consumption per milking ranged between 0.21 and 0.33 kWh; and the consumption per 100L of milk ranged between 1.80 to 2.44 kWh according to the different configurations and operational contexts considered. Results showed that AMS electric consumption was mainly conditioned by farm management rather than machine characteristics/architectures. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Simulation of embedded systems for energy consumption estimation

Energy Technology Data Exchange (ETDEWEB)

Lafond, S.

2009-07-01

Technology developments in semiconductor fabrication along with a rapid expansion of the market for portable devices, such as PDAs and mobile phones, make the energy consumption of embedded systems a major problem. Indeed the need to provide an increasing number of computational intensive applications and at the same time to maximize the battery life of portable devices can be seen as incompatible trends. System simulation is a flexible and convenient method for analyzinging and exploring the performance of a system or sub-system. At the same time, the increasing use of computational intensive applications strengthens the need to maximize the battery life of portable devices. As a consequence, the simulation of embedded systems for energy consumption estimation is becoming essential in order to study and explore the influence of system design choices on the system energy consumption. The original publications presented in the second part of this thesis propose several frameworks for evaluating the effects of particular system and software architectures on the system energy consumption. From a software point of view Java and C based applications are studied, and from a hardware perspective systems using general purpose processor and heterogeneous platforms with dedicated hardware accelerators are analyzed. Papers 1 and 2 present a framework for estimating the energy consumption of an embedded Java Virtual Machine and show how an accurate energy consumption model of Java opcodes can be obtained. Paper 3 evaluates the cost-effectiveness of Forward Error Correction algorithms in terms of energy consumption and demonstrates that a substantial energy saving is achievable in a DVB-H receiver when a FEC algorithm is used for file downloading scenarios. Paper 4 and 5 present the simulation of heterogeneous platforms and point out the drawback of different mechanisms used to synchronize a hardware accelerator used as a peripheral device. Paper 6 shows that the use of a multi

Power Consumption in Refrigeration Systems - Modeling for Optimization

DEFF Research Database (Denmark)

Hovgaard, Tobias Gybel; Larsen, Lars F. S.; Skovrup, Morten Juel

2011-01-01

Refrigeration systems consume a substantial amount of energy. Taking for instance supermarket refrigeration systems as an example they can account for up to 50−80% of the total energy consumption in the supermarket. Due to the thermal capacity made up by the refrigerated goods in the system...... there is a possibility for optimizing the power consumption by utilizing load shifting strategies. This paper describes the dynamics and the modeling of a vapor compression refrigeration system needed for sufficiently realistic estimation of the power consumption and its minimization. This leads to a non-convex function...... with possibly multiple extrema. Such a function can not directly be optimized by standard methods and a qualitative analysis of the system’s constraints is presented. The description of power consumption contains nonlinear terms which are approximated by linear functions in the control variables and the error...

Intelligent energy management control of vehicle air conditioning system coupled with engine

International Nuclear Information System (INIS)

Khayyam, Hamid; Abawajy, Jemal; Jazar, Reza N.

2012-01-01

Vehicle Air Conditioning (AC) systems consist of an engine powered compressor activated by an electrical clutch. The AC system imposes an extra load to the vehicle's engine increasing the vehicle fuel consumption and emissions. Energy management control of the vehicle air conditioning is a nonlinear dynamic system, influenced by uncertain disturbances. In addition, the vehicle energy management control system interacts with different complex systems, such as engine, air conditioning system, environment, and driver, to deliver fuel consumption improvements. In this paper, we describe the energy management control of vehicle AC system coupled with vehicle engine through an intelligent control design. The Intelligent Energy Management Control (IEMC) system presented in this paper includes an intelligent algorithm which uses five exterior units and three integrated fuzzy controllers to produce desirable internal temperature and air quality, improved fuel consumption, low emission, and smooth driving. The three fuzzy controllers include: (i) a fuzzy cruise controller to adapt vehicle cruise speed via prediction of the road ahead using a Look-Ahead system, (ii) a fuzzy air conditioning controller to produce desirable temperature and air quality inside vehicle cabin room via a road information system, and (iii) a fuzzy engine controller to generate the required engine torque to move the vehicle smoothly on the road. We optimised the integrated operation of the air conditioning and the engine under various driving patterns and performed three simulations. Results show that the proposed IEMC system developed based on Fuzzy Air Conditioning Controller with Look-Ahead (FAC-LA) method is a more efficient controller for vehicle air conditioning system than the previously developed Coordinated Energy Management Systems (CEMS). - Highlights: ► AC interacts: vehicle, environment, driver components, and the interrelationships between them. ► Intelligent AC algorithm which uses

Systems and practices in sustainable consumption research

DEFF Research Database (Denmark)

Røpke, Inge

The financial crisis in 2007-2008 and the subsequent economic crisis served as a wake-up call for sustainable consumption studies. The literature on consumption and environment had little focus on finance, but the crisis made it clear that financial issues are important also from an environmental...... perspective. Credit plays an important role as a driver of unsustainable consumption, and financial mechanisms contribute to the widening inequalities as well as the build-up of macroeconomic instability. Looking ahead, transformation of finance is just as important for sustainability as transformation...... of the provision systems for food, transport, housing, etc. that are the dominant focus of environmental studies. Intertwined with these systems, the economy includes various other systems that are decisive for the overall economic and environmental performance and for the distribution of goods and services...

Modeling Supermarket Refrigeration Systems for Demand-Side Management

Directory of Open Access Journals (Sweden)

Jakob Stoustrup

2013-02-01

Full Text Available Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while estimating the cold reservoir temperatures as well. The models developed for each module as well as for the overall integrated system are validated by real data collected from a supermarket in Denmark. The results show that the model is able to estimate the actual electrical power consumption with a high fidelity. Moreover a simulation benchmark is introduced based on the produced model for demand-side management in smart grid. Finally, a potential application of the proposed benchmark in direct control of the power/energy consumption is presented by a simple simulation example.

[The development of hospital medical supplies information management system].

Science.gov (United States)

Cao, Shaoping; Gu, Hongqing; Zhang, Peng; Wang, Qiang

2010-05-01

The information management of medical materials by using high-tech computer, in order to improve the efficiency of the consumption of medical supplies, hospital supplies and develop a new technology way to manage the hospital and material support. Using C # NET, JAVA techniques to develop procedures for the establishment of hospital material management information system, set the various management modules, production of various statistical reports, standard operating procedures. The system is convenient, functional and strong, fluent statistical functions. It can always fully grasp and understand the whole hospital supplies run dynamic information, as a modern and effective tool for hospital materials management.

Defining an Inteligent Information System for Monitoring and Verification of Energy Management in Cities

International Nuclear Information System (INIS)

Tomsic, Z.; Gasic, I.; Lugaric, L.; Cacic, G.

2011-01-01

Improving the efficiency of energy consumption (EC) is a central theme of any energy policy. Improved energy efficiency (EE) meets three energy policy goals: security of supply, competitiveness and protection of the environment. Systematic energy management is a body of knowledge and skills based on an organizational structure that links people with assigned responsibilities, efficiency monitoring procedures and continuous measurement and improvement of energy efficiency. This body of knowledge must be supported by appropriate ICT for gathering, processing and disseminating data on EC, EE targets and information. Energy Management Information System - EMIS is a web application for monitoring and analysis of energy and water consumption in public buildings and represents inevitable tool for systematic energy management. EMIS software tool connects processes of gathering data on buildings and their energy consumption, monitoring consumption indicators, setting energy efficiency targets and reporting energy and water consumption savings. Project Intelligent Information System for Monitoring and Verification of Energy Management in Cities (ISEMIC) will distribute EMIS software tool in region (BiH, Slovenia and Serbia). This project also has a goal of improving a software system for utilizing EC measurements, both from smart meters and traditional measurement devices and subsequent data processing and analysis to facilitate, upgrade and eventually replace the currently used energy management system for public buildings in Croatia. ISEMIC will enable use of smart meters within an energy management for the first time in BiH, Slovenia and Serbia, along with an analytical part which enables intelligent estimation of energy consumption based on multiple criteria. EMIS/ISEMIC will enable: Continuous updating and maintenance of a database of information on buildings; Continuous entry and monitoring of consumption data for all energents and water in buildings; Calculation of

Real-Time Vehicle Energy Management System Based on Optimized Distribution of Electrical Load Power

Directory of Open Access Journals (Sweden)

Yuefei Wang

2016-10-01

Full Text Available As a result of severe environmental pressure and stringent government regulations, refined energy management for vehicles has become inevitable. To improve vehicle fuel economy, this paper presents a bus-based energy management system for the electrical system of internal combustion engine vehicles. Both the model of an intelligent alternator and the model of a lead-acid battery are discussed. According to these models, the energy management for a vehicular electrical system is formulated as a global optimal control problem which aims to minimize fuel consumption. Pontryagin’s minimum principle is applied to solve the optimal control problem to realize a real-time control strategy for electrical energy management in vehicles. The control strategy can change the output of the intelligent alternator and the battery with the changes of electrical load and driving conditions in real-time. Experimental results demonstrate that, compared to the traditional open-loop control strategy, the proposed control strategy for vehicle energy management can effectively reduce fuel consumption and the fuel consumption per 100 km is decreased by approximately 1.7%.

Management of Water for Consumption and Pollution in the Yitenga ...

International Development Research Centre (IDRC) Digital Library (Canada)

Management of Water for Consumption and Pollution in the Yitenga Basin, Burkina ... The first phase, funded under the project, 102474 Community of Practice in ... Gestion de l'eau de consommation et de la pollution dans le bassin versant de ...

Risk Management of the Natural Gas Consumption using Genetic Algorithms

Czech Academy of Sciences Publication Activity Database

Pelikán, Emil; Šimůnek, Milan

2005-01-01

Roč. 15, - (2005), s. 425-436 ISSN 1210-0552 R&D Projects: GA AV ČR 1ET400300513 Institutional research plan: CEZ:AV0Z10300504 Keywords : forecasting * risk-management * energy consumption Subject RIV: BB - Applied Statistics, Operational Research

Energy management of DSL systems: Experimental findings

KAUST Repository

Guenach, Mamoun

2013-12-01

We present a measurement study of the energy consumption of an operator-side digital subscriber line (DSL) board under various conditions of data rate and power spectral density, with and without vectoring. The results highlight practical opportunities and challenges for optimizing rate-power-stability tradeoffs in DSL access systems, complementing simulation-based studies focused on energy reduction through spectral optimization. We validate models for line board consumption that can be tied with line driver consumption based on the aggregate transmit power of each line, and demonstrate that near-optimal rate-power-stability tradeoffs can be obtained through external line management of data rate, Signal-to-Noise-Ratio margin and power spectral density parameters. © 2013 IEEE.

Load management for refrigeration systems: Potentials and barriers

Energy Technology Data Exchange (ETDEWEB)

Grein, Arne, E-mail: a.grein@tu-berlin.de [University of Technology Berlin, Institute for Energy Technology, Department of Energy Systems, Einsteinufer 25 (TA8), 10587 Berlin (Germany); Pehnt, Martin [Institute for Energy and Environmental Research Heidelberg (ifeu), Wilckensstr. 3, 69120 Heidelberg (Germany)

2011-09-15

As a strategy to deal with the increasing intermittent input of renewable energy sources in Germany, the adaptation of power consumption is complementary to power-plant regulation, grid expansion and physical energy storage. One demand sector that promises strong returns for load management efforts is cooling and refrigeration. In these processes, thermal inertia provides a temporal buffer for shifting and adjusting the power consumption of cooling systems. We have conducted an empirical investigation to obtain a detailed and time-resolved bottom-up analysis of load management for refrigeration systems in the city of Mannheim, Germany. We have extrapolated our results to general conditions in Germany. Several barriers inhibit the rapid adoption of load management strategies for cooling systems, including informational barriers, strict compliance with legal cooling requirements, liability issues, lack of technical experience, an inadequate rate of return and organizational barriers. Small commercial applications of refrigeration in the food-retailing and cold storage in hotels and restaurants are particularly promising starting points for intelligent load management. When our results are applied to Germany, suitable sectors for load management have theoretical and achievable potential values of 4.2 and 2.8 GW, respectively, amounting to about 4-6% of the maximum power demand in Germany. - Highlights: > Potential and barriers for implementation of load shifting for refrigeration. > Empirical investigation for time-resolved bottom-up analysis in Mannheim, Germany. > Suitable sectors and further recommendations for introducing load management.> Extrapolation of results from local to national level.

Load management for refrigeration systems: Potentials and barriers

International Nuclear Information System (INIS)

Grein, Arne; Pehnt, Martin

2011-01-01

As a strategy to deal with the increasing intermittent input of renewable energy sources in Germany, the adaptation of power consumption is complementary to power-plant regulation, grid expansion and physical energy storage. One demand sector that promises strong returns for load management efforts is cooling and refrigeration. In these processes, thermal inertia provides a temporal buffer for shifting and adjusting the power consumption of cooling systems. We have conducted an empirical investigation to obtain a detailed and time-resolved bottom-up analysis of load management for refrigeration systems in the city of Mannheim, Germany. We have extrapolated our results to general conditions in Germany. Several barriers inhibit the rapid adoption of load management strategies for cooling systems, including informational barriers, strict compliance with legal cooling requirements, liability issues, lack of technical experience, an inadequate rate of return and organizational barriers. Small commercial applications of refrigeration in the food-retailing and cold storage in hotels and restaurants are particularly promising starting points for intelligent load management. When our results are applied to Germany, suitable sectors for load management have theoretical and achievable potential values of 4.2 and 2.8 GW, respectively, amounting to about 4-6% of the maximum power demand in Germany. - Highlights: → Potential and barriers for implementation of load shifting for refrigeration. → Empirical investigation for time-resolved bottom-up analysis in Mannheim, Germany. → Suitable sectors and further recommendations for introducing load management.→ Extrapolation of results from local to national level.

Development of structural diagram of automated dispatch control system for power consumption at non-ferrous metallurgy enterprises

Science.gov (United States)

Klyuev, R. V.; Bosikov, I. I.; Madaeva, M. Z.; A-V Turluev, R.

2018-03-01

The structural scheme of the automated control system of power consumption at the industrial enterprise is developed in the article. At the non-ferrous metallurgy enterprise, an energy inspection and a rank analysis of the electrical energy consumption of the main processing equipment were carried out. It is established that the enterprises of non-ferrous metallurgy are a complex process system consisting of a set of thousands of jointly functioning technological facilities. For the most effective estimation of power consumption of enterprises, it is reasonable to use the automated system of dispatching control of power consumption (ASDCPC). The paper presents the results of the development of the ASDCPC structural diagram that allows one to perform on-line control and management of the energy and process parameters of the main production units and the enterprise as a whole. As a result of the introduction of ASDCPC at the non-ferrous metallurgy enterprise, the consumed active power was reduced during the peak hours of the load by 20%, the specific electricity consumption - by 14%, the cost of the energy component in the cost of production of hard alloys - by 3%.

Constrained consumption shifting management in the distributed energy resources scheduling considering demand response

International Nuclear Information System (INIS)

Faria, Pedro; Vale, Zita; Baptista, Jose

2015-01-01

Highlights: • Consumption reduction and/or shift to several periods before and after. • Optimization problem for scheduling of demand response and distributed generation. • Minimization of the Virtual Power Player operation (remuneration) costs. • Demand response can be efficient to meet distributed generation shortages. • Consumers benefit with the remuneration of the participation in demand response. - Abstract: Demand response concept has been gaining increasing importance while the success of several recent implementations makes this resource benefits unquestionable. This happens in a power systems operation environment that also considers an intensive use of distributed generation. However, more adequate approaches and models are needed in order to address the small size consumers and producers aggregation, while taking into account these resources goals. The present paper focuses on the demand response programs and distributed generation resources management by a Virtual Power Player that optimally aims to minimize its operation costs taking the consumption shifting constraints into account. The impact of the consumption shifting in the distributed generation resources schedule is also considered. The methodology is applied to three scenarios based on 218 consumers and 4 types of distributed generation, in a time frame of 96 periods

Energy Management of Smart Distribution Systems

Science.gov (United States)

Ansari, Bananeh

Electric power distribution systems interface the end-users of electricity with the power grid. Traditional distribution systems are operated in a centralized fashion with the distribution system owner or operator being the only decision maker. The management and control architecture of distribution systems needs to gradually transform to accommodate the emerging smart grid technologies, distributed energy resources, and active electricity end-users or prosumers. The content of this document concerns with developing multi-task multi-objective energy management schemes for: 1) commercial/large residential prosumers, and 2) distribution system operator of a smart distribution system. The first part of this document describes a method of distributed energy management of multiple commercial/ large residential prosumers. These prosumers not only consume electricity, but also generate electricity using their roof-top solar photovoltaics systems. When photovoltaics generation is larger than local consumption, excess electricity will be fed into the distribution system, creating a voltage rise along the feeder. Distribution system operator cannot tolerate a significant voltage rise. ES can help the prosumers manage their electricity exchanges with the distribution system such that minimal voltage fluctuation occurs. The proposed distributed energy management scheme sizes and schedules each prosumer's ES to reduce the electricity bill and mitigate voltage rise along the feeder. The second part of this document focuses on emergency energy management and resilience assessment of a distribution system. The developed emergency energy management system uses available resources and redundancy to restore the distribution system's functionality fully or partially. The success of the restoration maneuver depends on how resilient the distribution system is. Engineering resilience terminology is used to evaluate the resilience of distribution system. The proposed emergency energy

Energy consumption of magnetic-levitation train systems

Energy Technology Data Exchange (ETDEWEB)

Mayer, W J

1981-11-01

In transport, interest is at present being directed to the energy consumption of the various systems. The 'maglev' system is not yet in practical transport use, so that many characteristics of the system have still to be proven. Calculations show, however, that the 'maglev' train system can meet or even exceed the high requirements familiar to us from the conventional railway. Among the assumptions made with respect to speed, acceleration, distance between halts and capacity utilization it can be shown by calculation that the 'maglev' system is more economical in energy consumption than most existing passenger transport systems. A final judgement on the still existing uncertainties with respect to the traction resistance curve and the motor efficiency can only be made after the experimental 'maglev' layout now being built in Emsland has gone into operation.

ACCUMULATION AND CONSUMPTION IN MICROECONOMIC SYSTEM

Directory of Open Access Journals (Sweden)

Serghey A. Amelkin

2004-12-01

Full Text Available Two main processes are common for an economic system. They are consumption and accumulation. The first one is described by utility function, either cardinal or ordinal one. The mathematical model for accumulation process can be constructed using wealth function introduced within the frame of irreversible microeconomics. Characteristics of utility and wealth functions are compared and a problem of extreme performance of resources exchange process is solved for a case when both the consumption and accumulation exist.

An optimal power management system for a regenerative auxiliary power system for delivery refrigerator trucks

International Nuclear Information System (INIS)

Mohagheghi Fard, Soheil; Khajepour, Amir

2016-01-01

Highlights: • A new anti-idling system for refrigerator trucks is proposed. • This system enables regenerative braking. • An innovative two-level controller is proposed for the power management system. • A fast dynamic programming technique to find real-time SOC trajectory is proposed. • In addition to idling elimination, this system reduces fuel consumption. - Abstract: Engine idling of refrigerator trucks during loading and unloading contributes to greenhouse gas emissions due to their increased fuel consumption. This paper proposes a new anti-idling system that uses two sources of power, battery and engine-driven generator, to run the compressor of the refrigeration system. Therefore, idling can be eliminated because the engine is turned OFF and the battery supplies auxiliary power when the vehicle is stopped for loading or unloading. This system also takes advantage of regenerative braking for increased fuel savings. The power management of this system needs to satisfy two requirements: it must minimize fuel consumption in the whole cycle and must ensure that the battery has enough energy for powering the refrigeration system when the engine is OFF. To meet these objectives, a two-level controller is proposed. In the higher level of this controller, a fast dynamic programming technique that utilizes extracted statistical features of drive and duty cycles of a refrigerator truck is used to find suboptimal values of the initial and final SOC of any two consecutive loading/unloading stops. The lower level of the controller employs an adaptive equivalent fuel consumption minimization (A-ECMS) to determine the split ratio of auxiliary power between the generator and battery for each segment with initial and final SOC obtained by the high-level controller. The simulation results confirm that this new system can eliminate idling of refrigerator trucks and reduce their fuel consumption noticeably such that the cost of replacing components is recouped in a

Implementation and Validation of a Self-Consumption Maximization Energy Management Strategy in a Vanadium Redox Flow BIPV Demonstrator

Directory of Open Access Journals (Sweden)

Luis Fialho

2016-06-01

Full Text Available This paper presents the results of the implementation of a self-consumption maximization strategy tested in a real-scale Vanadium Redox Flow Battery (VRFB (5 kW, 60 kWh and Building Integrated Photovoltaics (BIPV demonstrator (6.74 kWp. The tested energy management strategy aims to maximize the consumption of energy generated by a BIPV system through the usage of a battery. Whenever possible, the residual load is either stored in the battery to be used later or is supplied by the energy stored previously. The strategy was tested over seven days in a real-scale VRF battery to assess the validity of this battery to implement BIPV-focused energy management strategies. The results show that it was possible to obtain a self-consumption ratio of 100.0%, and that 75.6% of the energy consumed was provided by PV power. The VRFB was able to perform the strategy, although it was noticed that the available power (either to charge or discharge varied with the state of charge.

Consumption bomb.

Science.gov (United States)

Harrison, P

1999-01-01

This article focuses on the issue of consumption in relation to the growing world population. Over the past 25 years, world population increased by 53%, while world consumption per person increased by only 39%. If consumption continues to grow at 1.4%, the world consumption per person will rise by 100% over the next 50 years with the population increasing by only half that amount. The burden of reducing the environmental impact brought about by this increase lies on technology. Technology needs to deliver major changes in improving resource productivity, and decreasing the amount of waste created. Productivity such as global food production has kept up with demand. Malnutrition persists due to poverty, and not because of the inability of the world to produce enough food. However, the prospects are much worse for resources that are not traded on markets or subject to sustainable management such as groundwater, state forests, ocean fish, and communal waste sinks like rivers, lakes, and the global atmosphere. These resources are not under the direct control of people affected by shortage. People who want to change the way these resources are used or managed have to pass through the legal or political system. Usually, political responses are slow and there has to be a very widespread environmental damage before action is taken.

Management information systems in NCL - a pragmatic approach

Energy Technology Data Exchange (ETDEWEB)

Mittal, R.L.; Singh, M.K. [Northern Coalfields Limited, Sidhi (India)

2000-05-01

An information system named 'Information Retrieval System' (IRS) has been developed by Northern Coalfields Ltd., India, as a management information system for monitoring use of shovels, dumpers, draglines, diesel, lubricants, power, explosives and overtime expenditure. Reports are generated at regular intervals on production and consumption (if diesel, lubricant, power, explosives, overtime) and used to gauge overall performance of the coal mining operations. The present system is in Lotus 123 worksheefs. 2 apps.

Metering systems and demand-side management models applied to hybrid renewable energy systems in micro-grid configuration

International Nuclear Information System (INIS)

Blasques, L.C.M.; Pinho, J.T.

2012-01-01

This paper proposes a demand-side management model integrated to a metering system for hybrid renewable energy systems in micro-grid configuration. The proposal is based on the management problems verified in most of this kind of renewable hybrid systems installed in Brazil. The main idea is the implementation of a pre-paid metering system with some control functions that directly act on the consumer demand, restricting the consumption proportionally to the monthly availability of renewable energy. The result is a better distribution of the electricity consumption by month and by consumer, preventing that only one user, with larger purchasing power, consumes all the renewable energy available at some time period. The proportionality between the consumption and the renewable energy's availability has the objective to prevent a lack of energy stored and a high use of the diesel generator-set on months of low renewable potential. This paper also aims to contribute to the Brazilian regulation of renewable energy systems supplying micro-grids. - Highlights: ► Review of the Brazilian electricity regulation for small-scale isolated systems. ► Renewable systems are the most feasible option in several isolated communities. ► One proposal is to guarantee government subsidies for renewable energy systems. ► Smart electronic meters to create electricity restrictions for the consumers.

Electricity tariff systems for informatics system design regarding consumption optimization in smart grids

Directory of Open Access Journals (Sweden)

Simona Vasilica OPREA

2016-01-01

Full Text Available High volume of data is gathered via sensors and recorded by smart meters. These data are processed at the electricity consumer and grid operators' side by big data analytics. Electricity consumption optimization offers multiple advantages for both consumers and grid operators. At the electricity customer level, by optimizing electricity consumption savings are significant, but the main benefits will come from indirect aspects such as avoiding onerous grid investments, higher volume of renewable energy sources' integration, less polluted environment etc. In order to optimize electricity consumption, advanced tariff systems are essential due to the financial incentive they provide for electricity consumers' behaviour change. In this paper several advanced tariff systems are described in details. These systems are applied in England, Spain, Italy, France, Norway and Germany. These systems are compared from characteristics, advantages/disadvantages point of view. Then, different tariff systems applied in Romania are presented. Romanian tariff systems have been designed for various electricity consumers' types. Different tariff systems applied by grid operators or electricity suppliers will be included in the database model that is part of an informatics system for electricity consumption optimization.

D5.4 – Energy management system

DEFF Research Database (Denmark)

Madsen, Per Printz; Andersen, Palle

This report will focus on strategies for energy management as well at the building level and at the microgrid level. The designed energy management controller will manage energy flow such that generated power in the microgrid is mainly consumed by local consumers and the power trade between...... the microgrid and the grid is shrunk to minimum. Buildings’ role is to provide flexibility to the energy management controller so that this controller can use this flexibility to enhance the local use of the local produced energy and by that mean lower the energy bill for each house in the microgrid....... The Optimization of building loads are based on electricity price signal and shedding, shifting or rescheduling the power consumption pattern. The main shiftable loads are the HVAC systems. This system will be the primary controllable load for the energy management controller but also curtailable load and non...

Gas system 2016: Press conference 17 January 2017 + Gas consumption by administrative regions

International Nuclear Information System (INIS)

2017-01-01

GRTgaz is a European leader in natural gas transmission, a world expert in gas transmission networks and systems, and an operator firmly committed to the energy transition. It owns and operates the gas transmission network throughout most of France and it manages the transmission network in Germany, thereby helping to ensure correct operation of the French and European gas market. It contributes to the energy security of regional supply systems and performs a public service mission to ensure the continuity of consumer supply. This document presents some key figures about GRTgaz activity in 2016: A first part presents the national data about gas consumption, production of gas-fired power plants, new gas uses (diesel-gas substitution, biomethane..) and their environmental impacts, and the development of the Internet open-data platform. A second part presents the regional gas consumptions with a focus on industrial clients

The analysis of energy consumption of a commercial building in Tianjin, China

International Nuclear Information System (INIS)

Zhao Jing; Zhu Neng; Wu Yong

2009-01-01

According to statistics and field investigation, the energy consumption situation and reality of commercial building is described in this paper. As the first step of large-scale public building energy efficiency supervision system encouraged by central government of China, the energy consumption of several typical commercial buildings and public buildings was analyzed in detail. The main contents of investigation are as follows: basic information of building, operational record of energy consumption equipment, energy consumption of indoor equipments, energy-efficiency assessment of energy consumption systems and equipments, investigation of behavior energy saving, etc. On this basis further analysis and diagnosis including indoor thermal and humid environment, operation state of air-conditioning water system, operation state of air-conditioning duct system and operation management of air-conditioning system were implemented. The results show that the most energy consumption of buildings in this city is commercial buildings, which can reach to about 240 W/m 2 per year. Further analysis tells that air conditioning systems play the major role of building energy consumption, and building energy saving has great potential in this city. In this paper, the ways of diagnosis work for building energy consumption are also described and discussed. Reasonable test, diagnosis and analysis are meaningful for building energy efficiency retrofit and management.

Consumption coagulopathy in acute aortic dissection: principles of management.

Science.gov (United States)

Liu, Yuyong; Han, Lu; Li, Jiachen; Gong, Ming; Zhang, Hongjia; Guan, Xinliang

2017-06-12

The effect of acute aortic dissection itself on coagulopathy or surgery-related coagulopathy has never been specifically studied. The aim of the present study was to perioperatively describe consumption coagulopathy in patients with acute aortic dissection. Sixty-six patients with acute type A aortic dissection were enrolled in this study from January 2015 to September 2016. Thirty-six patients with thoracic aortic aneurysms were used as a control group during the same period. Consumption coagulopathy was evaluated using standard laboratory tests, enzyme-linked immunosorbent assay and thromboelastograghy at five perioperative time-points. A significant reduction in clotting factors and fibrinogen was observed at the onset of acute aortic dissection. Enzyme-linked immunosorbent assay and thromboelastograghy also revealed a persistent systemic activation of the coagulation system and the consumption of clotting factors. In contrast, although platelet counts were consistently low, we did not find that platelet function was more impaired in the acute aortic dissection group than the control group. After surgery, clotting factors and fibrinogen were more impaired than platelet function. Thus, we proposed that hemostatic therapy should focus on the rapid and sufficient supplementation of clotting factors and fibrinogen to improve consumption coagulopathy in patients with acute aortic dissection.

Informatics Solution for Energy Efficiency Improvement and Consumption Management of Householders

Directory of Open Access Journals (Sweden)

Simona-Vasilica Oprea

2018-01-01

Full Text Available Although in 2012 the European Union (EU has promoted energy efficiency in order to ensure a gradual 20% reduction of energy consumption by 2020, its targets related to energy efficiency have increased and extended to new time horizons. Therefore, in 2016, a new proposal for 2030 of energy efficiency target of 30% has been agreed. However, during the last years, even if the electricity consumption by households decreased in the EU-28, the largest expansion was recorded in Romania. Taking into account that the projected consumption peak is increasing and energy consumption management for residential activities is an important measure for energy efficiency improvement since its ratio from total consumption can be around 25–30%, in this paper, we propose an informatics solution that assists both electricity suppliers/grid operators and consumers. It includes three models for electricity consumption optimization, profiles, clustering and forecast. By this solution, the daily operation of appliances can be optimized and scheduled to minimize the consumption peak and reduce the stress on the grid. For optimization purpose, we propose three algorithms for shifting the operation of the programmable appliances from peak to off-peak hours. This approach enables the supplier to apply attractive time-of-use tariffs due to the fact that by flattening the consumption peak, it becomes more predictable, and thus improves the strategies on the electricity markets. According to the results of the optimization process, we compare the proposed algorithms emphasizing the benefits. For building consumption profiles, we develop a clustering algorithm based on self-organizing maps. By running the algorithm for three scenarios, well-delimited profiles are obtained. As for the consumption forecast, highly accurate feedforward artificial neural networks algorithm with backpropagation is implemented. Finally, we test these algorithms using several datasets showing their

Management of Water for Consumption and Pollution in the Yitenga ...

International Development Research Centre (IDRC) Digital Library (Canada)

13 sept. 2007 ... Management of Water for Consumption and Pollution in the Yitenga Basin, Burkina Faso - Phase II. The first phase, funded under the project, 102474 Community of Practice in Ecohealth (sub-Saharan Africa), consisted of a study of the risk of diarrheal diseases or their resurgence in the area of the Yitenga ...

BizWatts: A modular socio-technical energy management system for empowering commercial building occupants to conserve energy

International Nuclear Information System (INIS)

Gulbinas, R.; Jain, R.K.; Taylor, J.E.

2014-01-01

Highlights: • We developed a socio-technical commercial building energy management system. • It was designed for directly engaging and connecting building occupants via feedback. • We collected an array of clickstream data for internal design validation. • A pilot study validated its ability to drive energy savings in commercial buildings. - Abstract: Commercial buildings represent a significant portion of energy consumption and environmental emissions worldwide. To help mitigate the environmental impact of building operations, building energy management systems and behavior-based campaigns designed to reduce energy consumption are becoming increasingly popular. In this paper, we describe the development of a modular socio-technical energy management system, BizWatts, which combines the two approaches by providing real-time, appliance-level power management and socially contextualized energy consumption feedback. We describe in detail the physical and virtual architecture of the system, which simultaneously engages building occupants and facility managers, as well as the main principles behind the interface design and component functionalities. A discussion about how the data collection capabilities of the system enable insightful commercial building energy efficiency studies and quantitative network analysis is also included. We conclude by commenting on the validation of the system, identifying current system limitations and introducing new research avenues that the development and deployment of BizWatts enables

Consumer Acceptance Analysis of the Home Energy Management System

Directory of Open Access Journals (Sweden)

Eung-Suk Park

2017-12-01

Full Text Available The purpose of this paper is to study consumer acceptance of the Home Energy Management System, which is the next generation electronic management system that the Korean government plans to implement in households. The Home Energy Management System is a critical device in maximizing the efficiency of electric energy consumption for each household by using a smart grid. Because it can visualize real-time price information on the electricity, households can easily monitor and control the amount of electricity consumption. With this feature, the Home Energy Management System can contribute to consumers’ total energy savings. This is a major reason why the Korean government wishes to implement it nationwide. Since the Home Energy Management System is a product that applies new technology that has not yet been directly encountered by consumers, there may be a difference in the level of public perception of the Home Energy Management System. Therefore, the impact of consumers’ awareness of the Home Energy Management System on their intention to use is important. To do this, the Technology Acceptance Model is utilized in this study. Traditional research on the Technology Acceptance Model includes awareness of usefulness and ease of use as well as intention to use. In contrast, in this research, an extended Technology Acceptance Model with four additional factors—economic benefit, social contribution, environmental responsibility, and innovativeness—that may affect the consumer’s awareness of usefulness and ease of use, is proposed. To collect the data, the survey was conducted with 287 respondents. As a result, the proposed model proved to be suitable in explaining the intention to use with a 70.3% explanation power. It is found that economic benefit (0.231 and innovativeness (0.259 impact on usefulness of the Home Energy Management System. Moreover, usefulness (0.551 has a bigger effect on intention to use than ease of use (0.338 does. Based

Conference on the new models of photovoltaic consumption and commercialization

International Nuclear Information System (INIS)

Gastiger, Michaela; Persem, Melanie; Joly, Jean-Pierre; Freier, Karin; Fontaine, Pierre; Mueth, Thierry; Marliave, Luc de; Woerlen, Christine; Gerdung, Anja; Jedliczka, Marc; Mayer, Joerg; Jimenez, Julien; Richard, Pascal; Vogtmann, Michael; Schaefer, Felix; Martin, Nicolas; Blanc, Francois; Ostermann, Christoph; Borghese, Francois; Nykamp, Stefan; Von Appen, Jan; Buis, Sabine; Gossement, Arnaud

2014-01-01

This document gathers contributions (Power Point presentations) of a conference on new models of consumption and commercialisation in the solar photovoltaic sector in France and in Germany. These contributions address the following topics: Stimulating self-consumption and direct selling within the EEG; Development of PV self-consumption in France; Experience from applying the new support program for solar energy storage systems; Call for solar photovoltaic projects for own consumption in the Aquitaine region; The SMA flexible storage system (technical solutions for a PV system in a smart home); PV own consumption in industry and commerce, examples and operating concepts; Supplying tenants in multiple-family housing with solar power in the 'Neue Heimat' project; How to manage PV-storage self-consumption from a grid point of view

Analysis of Photovoltaic Self-Consumption Systems

Directory of Open Access Journals (Sweden)

Carlos J. Sarasa-Maestro

2016-08-01

Full Text Available Components and installation prices could make the self-consumption of solar photovoltaic (PV systems competitive. In this paper, we explore different self-consumption options, off-grid PV systems (with back-up generator and/or batteries, and grid-connected PV systems under net-metering policies. The calculation of the net present cost (NPC reveals that the grid-connected PV-only case (for the net-metering scheme is the most attractive from the technical and financial points of view, with a levelised cost of energy less than 0.1 €/kWh. Off-grid PV + Diesel + Batteries has a higher cost, around two or three times the grid-connected PV-only under net metering. Additionally, the off-grid PV + Diesel is less attractive from a financial point of view, which has a cost of around 10 times the PV-only under net metering. In addition, the values of life cycle CO2 emissions in each of the cases studied have been compared, and we have concluded that although the off-grid PV + Diesel + Batteries system presents lower CO2 emissions than the PV-only system, the existence of batteries does not allow one to affirm that the PV + Diesel + Batteries system is the best from an environmental point of view.

A novel microgrid demand-side management system for manufacturing facilities

Science.gov (United States)

Harper, Terance J.

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

Is alcohol and community sport a good mix? Alcohol management, consumption and social capital in community sports clubs.

Science.gov (United States)

Rowland, Bosco C; Wolfenden, Luke; Gillham, Karen; Kingsland, Melanie; Richardson, Ben; Wiggers, John

2015-06-01

Community sports clubs provide an important contribution to the health and wellbeing of individuals and the community; however, they have also been associated with risky alcohol consumption. This study assessed whether a club's alcohol management strategies were related to risky alcohol consumption by members and levels of social capital, as measured in terms of participation in and perceived safety of the club. A total of 723 sports club members from 33 community football clubs in New South Wales, Australia, completed a computer assisted telephone interview (CATI) and a management representative from each club also completed a CATI. The club representative reported on the club's implementation of 11 alcohol management practices, while club members reported their alcohol consumption and perceived levels of safety at the club and participation in the club. A structural equation model identified having the bar open for more than four hours; having alcohol promotions; and serving intoxicated patrons were associated with increased risky alcohol consumption while at the club; which in turn was associated with lower levels of perceived club safety and member participation. The positive contribution of community sports clubs to the community may be diminished by specific inadequate alcohol management practices. Changing alcohol management practices can reduce alcohol consumption, and possibly increase perceived aspects of social capital, such as safety and participation. © 2014 Public Health Association of Australia.

Optimal energy management of HEVs with hybrid storage system

International Nuclear Information System (INIS)

Vinot, E.; Trigui, R.

2013-01-01

Highlights: • A battery and ultra-capacitor system for parallel hybrid vehicle is considered. • Optimal management using Pontryagin’s minimum principle is developed. • Battery stress limitation is taken into account by means of RMS current. • Rule based management approaching the optimal control is proposed. • Comparison between rule based and optimal management are proposed using Pareto front. - Abstract: Energy storage systems are a key point in the design and development of electric and hybrid vehicles. In order to reduce the battery size and its current stress, a hybrid storage system, where a battery is coupled with an electrical double-layer capacitor (EDLC) is considered in this paper. The energy management of such a configuration is not obvious and the optimal operation concerning the energy consumption and battery RMS current has to be identified. Most of the past work on the optimal energy management of HEVs only considered one additional power source. In this paper, the control of a hybrid vehicle with a hybrid storage system (HSS), where two additional power sources are used, is presented. Applying the Pontryagin’s minimum principle, an optimal energy management strategy is found and compared to a rule-based parameterized control strategy. Simulation results are shown and discussed. Applied on a small compact car, optimal and ruled-based methods show that gains of fuel consumption and/or a battery RMS current higher than 15% may be obtained. The paper also proves that a well tuned rule-based algorithm presents rather good performances when compared to the optimal strategy and remains relevant for different driving cycles. This rule-based algorithm may easily be implemented in a vehicle prototype or in an HIL test bench

An Electrical Energy Consumption Monitoring and Forecasting System

Directory of Open Access Journals (Sweden)

J. L. Rojas-Renteria

2016-10-01

Full Text Available Electricity consumption is currently an issue of great interest for power companies that need an as much as accurate profile for controlling the installed systems but also for designing future expansions and alterations. Detailed monitoring has proved to be valuable for both power companies and consumers. Further, as smart grid technology is bound to result to increasingly flexible rates, an accurate forecast is bound to prove valuable in the future. In this paper, a monitoring and forecasting system is investigated. The monitoring system was installed in an actual building and the recordings were used to design and evaluate the forecasting system, based on an artificial neural network. Results show that the system can provide detailed monitoring and also an accurate forecast for a building’s consumption.

Freescale Semiconductor Successfully Implements an Energy Management System

Energy Technology Data Exchange (ETDEWEB)

None

2011-06-30

Through the Superior Energy Performance (SEP) plant certification program, Freescale Semiconductor implemented projects at the company's Oak Hill Fab plant that reduced annual energy consumption by 28 million kilowatt hours (kWh) of electricity and 26,000 million British thermal units (Btu) of natural gas between 2006 and 2009, saving more than $2 million each year. The plant is now certified at the SEP silver level, and has a management system in place to proactively manage the facility's energy resources in the future.

The Effect of School-Based Management on Schools' Culture of Consumption

Science.gov (United States)

Nir, Adam E.

2007-01-01

The purpose of this study was to assess the extent to which the introduction of school-based management (SBM) has affected schools' culture of consumption and the inequalities between schools with different socio-economic backgrounds. An analysis of financial reports from 31 SBM schools over four years reveals that schools have increased rather…

A Conceptual Framework for Occupant-Centered Building Management Decision Support System

DEFF Research Database (Denmark)

Lazarova-Molnar, Sanja; Shaker, Hamid Reza

2016-01-01

-obvious/-direct incentive to reduce energy use and no access to their levels of consumption. In this paper we present a framework for a building energy management decision support system that is motivated by these findings, and therefore, centres the occupants and motivates them to both achieve business-wise and improve......Buildings’ energy consumption makes the largest portion of the overall energy consumption. Commercial buildings are specific and their energy efficiency should not be viewed as a standalone issue. On the contrary, it needs to be viewed in function of the goals of the hosted businesses...

Bus fuel consumption model

Energy Technology Data Exchange (ETDEWEB)

Zargari, S.A. [Iran Univ. of Science and Technology, Teheran (Iran, Islamic Republic of); Khan, A.M. [Carleton Univ., Ottawa, ON (Canada). Dept. of Civil and Environmental Engineering

2000-07-01

The interest in rapid bus transit has increased sharply with the realization that modern metropolitan areas rely on public transit to provide for strong economies and communities. As a prevention tool against traffic congestion, deteriorating air quality and rising greenhouse gas emissions, this study of bus fuel consumption was designed to assist in the planning and management of rapid bus transit. The Australian Road Research Board's (ARRB) Road Fuel Consumption Model was used as a starting point. The estimations required were realized with the help of Newtonian Mechanics. The four states of vehicular traffic were examined: acceleration, cruise, deceleration, and idle. The estimated total power required from the engine to overcome resistance forces, to run vehicle accessories and overcome internal engine friction was calculated. The data for the standard and articulated bus was obtained from OC Transpo in Ottawa. The study permitted the authors to conclude that the estimations for the parameters for power requirements and fuel consumption for heavy duty vehicles are appropriate. The methodology for the estimation of fuel consumption on the Transitway, which is part of the rapid bus transit system, proved adequate. In addition, the methodology was useful to estimate fuel savings resulting from demand management strategies with potential for modal shift. 9 refs., 6 tabs.

Energy efficiency in a water supply system:Energy consumption and CO2 emission

Institute of Scientific and Technical Information of China (English)

Helena M.RAMOS; Filipe VIEIRA; Didia I.C.COVAS

2010-01-01

This paper presents important fundamentals associated with water and energy efficiency and highlights the importance of using renewable energy sources.A model of multi-criteria optimization for energy efficiency based on water and environmental management policies,including the preservation of water resources and the control of water pressure and energy consumption through a hybrid energy solution,was developed and applied to a water supply system.The methodology developed includes three solutions:(1)the use of a water turbine in pipe systems where pressures are higher than necessary and pressure-reducing valves are installed,(2)the optimization of pumping operation according to the electricity tariff and water demand,and(3)the use of other renewable energy sources,including a wind turbine,to supply energy to the pumping station,with the remaining energy being sold to the national electric grid.The use of an integrated solution(water and energy)proves to be a valuable input for creating benefits from available hydro energy in the water supply system in order to produce clean power,and the use of a wind source allows for the reduction of energy consumption in pumping stations,as well as of the CO2 emission to the atmosphere.

Informational system as an instrument for assessing the performance of the quality management system

Science.gov (United States)

Rohan, R.; Roşu, M. M.

2017-08-01

At present there is used a significant number of techniques and methods for diagnosis and management analysis which support the decision-making process. All these methods facilitate reaching the objectives for improving the results through efficiency, quality and customer satisfaction. By developing a methodology for analysing the problems identified in the macro-productive companies there can be brought outstanding benefits to the management and there are offered new perspectives on the critical influencing factors within a system. Through this paper we present an effective management strategy, applicable to an organization with productive profile in order to design an informational system aimed to manage one of its most important and complex systems, namely the coordination of the quality management system. The informational organisation of the quality management system on management principles, ensures an optimization of the informational energy consumption, allowing the management to deal with the following: to ascertain the current situation; to seize the opportunities, but also the potential risks afferent to the organisation policy; to observe the strengths and weaknesses; to take appropriate decisions and then to control the effects obtained. In this way, the decisional factors are able to better understand the available opportunities and to base more efficiently the process of choosing the alternatives.

Gas system 2015: Press conference 21 January 2016 + Gas consumption by administrative regions

International Nuclear Information System (INIS)

2016-01-01

GRTgaz is a European leader in natural gas transmission, a world expert in gas transmission networks and systems, and an operator firmly committed to the energy transition. It owns and operates the gas transmission network throughout most of France and it manages the transmission network in Germany, thereby helping to ensure correct operation of the French and European gas market. It contributes to the energy security of regional supply systems and performs a public service mission to ensure the continuity of consumer supply. This document presents some key figures about GRTgaz activity in 2015: Gas consumption resumed despite warm conditions in 2015. Gas demand for power generation in gas-fired power plants has strongly increased, due to favourable economic conditions. 2015 was characterised by the lowest LNG imports to France ever, which entailed a still intensive use of the North-South link, despite transits to Spain and Italy back to 5 year average level. New gas uses and biomethane permitted to avoid 490,000 tonnes of CO 2 emissions in 2015. A second part presents the regional gas consumptions by administrative regions

A management information system to study space diets.

Science.gov (United States)

Kang, Sukwon; Both, A J

2002-01-01

A management information system (MIS), including a database management system (DBMS) and a decision support system (DSS), was developed to dynamically analyze the variable nutritional content of foods grown and prepared in an Advanced Life Support System (ALSS) such as required for long-duration space missions. The DBMS was designed around the known nutritional content of a list of candidate crops and their prepared foods. The DSS was designed to determine the composition of the daily crew diet based on crop and nutritional information stored in the DBMS. Each of the selected food items was assumed to be harvested from a yet-to-be designed ALSS biomass production subsystem and further prepared in accompanying food preparation subsystems. The developed DBMS allows for the analysis of the nutrient composition of a sample 20-day diet for future Advanced Life Support missions and is able to determine the required quantities of food needed to satisfy the crew's daily consumption. In addition, based on published crop growth rates, the DBMS was able to calculate the required size of the biomass production area needed to satisfy the daily food requirements for the crew. Results from this study can be used to help design future ALSS for which the integration of various subsystems (e.g., biomass production, food preparation and consumption, and waste processing) is paramount for the success of the mission.

A management information system to study space diets

Science.gov (United States)

Kang, Sukwon; Both, A. J.; Janes, H. W. (Principal Investigator)

2002-01-01

A management information system (MIS), including a database management system (DBMS) and a decision support system (DSS), was developed to dynamically analyze the variable nutritional content of foods grown and prepared in an Advanced Life Support System (ALSS) such as required for long-duration space missions. The DBMS was designed around the known nutritional content of a list of candidate crops and their prepared foods. The DSS was designed to determine the composition of the daily crew diet based on crop and nutritional information stored in the DBMS. Each of the selected food items was assumed to be harvested from a yet-to-be designed ALSS biomass production subsystem and further prepared in accompanying food preparation subsystems. The developed DBMS allows for the analysis of the nutrient composition of a sample 20-day diet for future Advanced Life Support missions and is able to determine the required quantities of food needed to satisfy the crew's daily consumption. In addition, based on published crop growth rates, the DBMS was able to calculate the required size of the biomass production area needed to satisfy the daily food requirements for the crew. Results from this study can be used to help design future ALSS for which the integration of various subsystems (e.g., biomass production, food preparation and consumption, and waste processing) is paramount for the success of the mission.

Expert assessment of the current state of the energy management system in the company

Science.gov (United States)

Minnullina, Anna; Abdrazakov, Rais

2017-10-01

The authors’ expert assessment of the current state of the energy management system in the company is proposed in the article. The experts are invited to assess the status of the energy management system in the following categories: energy policy, organizational structure, training, motivation, control, communication, investment, and energy consumption culture. For the purposes of interpretation of the results of the expert evaluation obtained, a gradation based on a possible range of values is proposed. The expert evaluation allows representing the status of the energy management system in general and at each of its individual levels, which makes it possible to identify the problem areas more accurately. To confirm the applied nature of the proposed methodology, the authors assessed the opinions of 8 experts, employed by the road construction company of the Tyumen Region and related in one way or another to the process of energy consumption in the company due to the nature of their activities.

An information system for sustainable materials management with material flow accounting and waste input–output analysis

Directory of Open Access Journals (Sweden)

Pi-Cheng Chen

2017-05-01

Full Text Available Sustainable materials management focuses on the dynamics of materials in economic and environmental activities to optimize material use efficiency and reduce environmental impact. A preliminary web-based information system is thus developed to analyze the issues of resource consumption and waste generation, enabling countries to manage resources and wastes from a life cycle perspective. This pioneering system features a four-layer framework that integrates information on physical flows and economic activities with material flow accounting and waste input–output table analysis. Within this framework, several applications were developed for different waste and resource management stakeholders. The hierarchical and interactive dashboards allow convenient overview of economy-wide material accounts, waste streams, and secondary resource circulation. Furthermore, the system can trace material flows through associated production supply chain and consumption activities. Integrated with economic models; this system can predict the possible overloading on the current waste management facility capacities and provide decision support for designing strategies to approach resource sustainability. The limitations of current system are specified for directing further enhancement of functionalities.

Management of a power system based on renewable energy

Directory of Open Access Journals (Sweden)

Ronay Karoly

2012-06-01

Full Text Available This article main purpose is to highlight the main advantage of the hardware and software implementation for an energy management system based on renewable energy sources. By using implemented and dedicated hardware and software the evolution of energy production and consumption can be monitored. The advantages of such system are highlighted by the results obtained from experimental simulations. An experimental model for the power system based on renewable energy sources was implemented, where the actual status of the system in different situations when the equipments change their own statuses can be shown.

System Architecture and Mobility Management for Mobile Immersive Communications

Directory of Open Access Journals (Sweden)

Mehran Dowlatshahi

2007-01-01

Full Text Available We propose a system design for delivery of immersive communications to mobile wireless devices based on a distributed proxy model. It is demonstrated that this architecture addresses key technical challenges for the delivery of these services, that is, constraints on link capacity and power consumption in mobile devices. However, additional complexity is introduced with respect to application layer mobility management. The paper proposes three possible methods for updating proxy assignments in response to mobility management and compares the performance of these methods.

Sanitary hot water consumption patterns in commercial and industrial sectors in South Africa: Impact on heating system design

International Nuclear Information System (INIS)

Rankin, R.; Rousseau, P.G.

2006-01-01

peak in hot water consumption. This leads to a requirement for bigger heating and storage capacities in commercial buildings like hotels. A summary of the results are provided in the form of minimum design parameters for different hot water consumption profiles. This study emphasizes the importance of understanding the trends of hot water consumption in buildings, especially when demand side management projects are done on these types of systems

Energy efficiency in a water supply system: Energy consumption and CO2 emission

Directory of Open Access Journals (Sweden)

Helena M. Ramos

2010-09-01

Full Text Available This paper presents important fundamentals associated with water and energy efficiency and highlights the importance of using renewable energy sources. A model of multi-criteria optimization for energy efficiency based on water and environmental management policies, including the preservation of water resources and the control of water pressure and energy consumption through a hybrid energy solution, was developed and applied to a water supply system. The methodology developed includes three solutions: (1 the use of a water turbine in pipe systems where pressures are higher than necessary and pressure-reducing valves are installed, (2 the optimization of pumping operation according to the electricity tariff and water demand, and (3 the use of other renewable energy sources, including a wind turbine, to supply energy to the pumping station, with the remaining energy being sold to the national electric grid. The use of an integrated solution (water and energy proves to be a valuable input for creating benefits from available hydro energy in the water supply system in order to produce clean power, and the use of a wind source allows for the reduction of energy consumption in pumping stations, as well as of the CO2 emission to the atmosphere.

THE IMPLEMENTATION OF THE INTEGRATED MANAGEMENT SYSTEMS IN TOURIST PENSION

Directory of Open Access Journals (Sweden)

Elena G. CONDREA

2014-04-01

Full Text Available We can say that you cannot maintain yourself on the current market of rural tourism operators unless you provide customers with quality products and services, prepared foods safe for consumption, and, not least, if you do not prove you are concerned with ensuring a healthy and clean environment, environmental protection. In this paper we intend to present some aspects of implementing an integrated management system of quality - food security - the average level of tourist pension, and highlight the benefits brought by this ongoing process to the respective operators in rural tourism. To this end, we studied the standards, references available in this area, and documents produced within guesthouses with the implementation of various management systems components of an integrated quality - environment - food security management system.

Efficient energy consumption and operation management in a smart building with microgrid

International Nuclear Information System (INIS)

Zhang, Di; Shah, Nilay; Papageorgiou, Lazaros G.

2013-01-01

Highlights: • An MILP model is formulated for energy consumption scheduling in a smart building. • Domestic appliances from multiple smart homes are considered. • Equipment operation and power consumption tasks starting time are scheduled. • Results from two examples indicate cost savings and power peak reduction. • Peak demand charge scheme is adopted to reduce the peak demand from grid. - Abstract: Microgrid works as a local energy provider for domestic buildings to reduce energy expenses and gas emissions by utilising distributed energy resources (DERs). The rapid advances in computing and communication capabilities enable the concept smart buildings become possible. Most energy-consuming household tasks do not need to be performed at specific times but rather within a preferred time. If these types of tasks can be coordinated among multiple homes so that they do not all occur at the same time yet still satisfy customers’ requirement, the energy cost and power peak demand could be reduced. In this paper, the optimal scheduling of smart homes’ energy consumption is studied using a mixed integer linear programming (MILP) approach. In order to minimise a 1-day forecasted energy consumption cost, DER operation and electricity-consumption household tasks are scheduled based on real-time electricity pricing, electricity task time window and forecasted renewable energy output. Peak demand charge scheme is also adopted to reduce the peak demand from grid. Two numerical examples on smart buildings of 30 homes and 90 homes with their own microgrid indicate the possibility of cost savings and electricity consumption scheduling peak reduction through the energy consumption and better management of DER operation

Smart Waste Collection System with Low Consumption LoRaWAN Nodes and Route Optimization

Directory of Open Access Journals (Sweden)

Álvaro Lozano

2018-05-01

Full Text Available New solutions for managing waste have emerged due to the rise of Smart Cities and the Internet of Things. These solutions can also be applied in rural environments, but they require the deployment of a low cost and low consumption sensor network which can be used by different applications. Wireless technologies such as LoRa and low consumption microcontrollers, such as the SAM L21 family make the implementation and deployment of this kind of sensor network possible. This paper introduces a waste monitoring and management platform used in rural environments. A prototype of a low consumption wireless node is developed to obtain measurements of the weight, filling volume and temperature of a waste container. This monitoring allows the progressive filling data of every town container to be gathered and analysed as well as creating alerts in case of incidence. The platform features a module for optimising waste collection routes. This module dynamically generates routes from data obtained through the deployed nodes to save energy, time and consequently, costs. It also features a mobile application for the collection fleet which guides every driver through the best route—previously calculated for each journey. This paper presents a case study performed in the region of Salamanca to evaluate the efficiency and the viability of the system’s implementation. Data used for this case study come from open data sources, the report of the Castilla y León waste management plan and data from public tender procedures in the region of Salamanca. The results of the case study show a developed node with a great lifetime of operation, a large coverage with small deployment of antennas in the region, and a route optimization system which uses weight and volume measured by the node, and provides savings in cost, time and workforce compared to a static collection route approach.

Smart Waste Collection System with Low Consumption LoRaWAN Nodes and Route Optimization.

Science.gov (United States)

Lozano, Álvaro; Caridad, Javier; De Paz, Juan Francisco; Villarrubia González, Gabriel; Bajo, Javier

2018-05-08

New solutions for managing waste have emerged due to the rise of Smart Cities and the Internet of Things. These solutions can also be applied in rural environments, but they require the deployment of a low cost and low consumption sensor network which can be used by different applications. Wireless technologies such as LoRa and low consumption microcontrollers, such as the SAM L21 family make the implementation and deployment of this kind of sensor network possible. This paper introduces a waste monitoring and management platform used in rural environments. A prototype of a low consumption wireless node is developed to obtain measurements of the weight, filling volume and temperature of a waste container. This monitoring allows the progressive filling data of every town container to be gathered and analysed as well as creating alerts in case of incidence. The platform features a module for optimising waste collection routes. This module dynamically generates routes from data obtained through the deployed nodes to save energy, time and consequently, costs. It also features a mobile application for the collection fleet which guides every driver through the best route—previously calculated for each journey. This paper presents a case study performed in the region of Salamanca to evaluate the efficiency and the viability of the system’s implementation. Data used for this case study come from open data sources, the report of the Castilla y León waste management plan and data from public tender procedures in the region of Salamanca. The results of the case study show a developed node with a great lifetime of operation, a large coverage with small deployment of antennas in the region, and a route optimization system which uses weight and volume measured by the node, and provides savings in cost, time and workforce compared to a static collection route approach.

Gap analysis of industrial energy management systems in Slovenia

International Nuclear Information System (INIS)

Pusnik, Matevz; Al-Mansour, Fouad; Sucic, Boris; Gubina, A.F.

2016-01-01

Industrial energy management systems, which comprise software solutions, upfront services, and ongoing monitoring and management, enable industrial companies to actively manage their energy consumption and energy procurement activities. Energy management systems are usually tailored to the specific industrial needs but may offer limited functionalities, mostly as a result of different identified gaps (process simplifications, improper measurement points, a lack of motivation, etc.). A survey was conducted in order to analyse the gaps and use of energy management systems in Slovenian industry. The results of the survey presented in this paper demonstrate that the use of energy management systems in industry is recognised as a potential competitive advantage by most of the addressed companies. Furthermore, motivation was highlighted as an important prerequisite for process and structural improvements and reported to be thus far insufficiently addressed. Furthermore, the importance of strong cooperation with actors at different levels of industry, namely the executive and shop floor levels, is addressed. In the conclusion, possibilities for new opportunities in the exploitation of energy efficiency through the use of industrial energy management systems are discussed. - Highlights: • Investigating gaps and evaluation of EMS use in Slovenian industry. • Analysis based on the developed self-assessment tool 3EMT. • Existing EMS do not include all the requirements for the industrial operations. • Constructive cooperation between all stakeholders is of crucial importance.

Energy consumption of auxiliary systems of electric cars

Directory of Open Access Journals (Sweden)

Evtimov Ivan

2017-01-01

Full Text Available The paper analyzes the power demand of the auxiliary systems of electric cars. On the basis of existing electric cars an analysis of energy consumption of different auxiliary systems is done. As a result possibilities for rational use of these systems have been proposed, which can increase the mileage per one charge of the battery.

Consumption Behavior Analytics-Aided Energy Forecasting and Dispatch

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yang, Rui [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Kaiqing [University of Illinois Urbana-Champaign; Zhang, Jun Jason [University of Denver

2017-08-17

For decades, electricity customers have been treated as mere recipients of electricity in vertically integrated power systems. However, as customers have widely adopted distributed energy resources and other forms of customer participation in active dispatch (such as demand response) have taken shape, the value of mining knowledge from customer behavior patterns and using it for power system operation is increasing. Further, the variability of renewable energy resources has been considered a liability to the grid. However, electricity consumption has shown the same level of variability and uncertainty, and this is sometimes overlooked. This article investigates data analytics and forecasting methods to identify correlations between electricity consumption behavior and distributed photovoltaic (PV) output. The forecasting results feed into a predictive energy management system that optimizes energy consumption in the near future to balance customer demand and power system needs.

Consumption management in the Nord Pool region: A stability analysis

DEFF Research Database (Denmark)

Lindström, Erik; Madsen, Henrik; Norén, Vicke

2015-01-01

Integration of fluctuating renewables like wind and solar power is nowadays a hot topic, but this comes at a cost of decreased stability of the power system. The deterioration often translates into so-called spikes and drops in the electricity spot price, very large (even extreme) deviations from...... the regular spot price, followed by a reversion to roughly the original level a few days later. We use the spikes and drops as an strong indication that there is an imbalance in the physical power system in this paper. Independent Spike Models (ISM) is a popular class of models for the electricity spot price...... into the power system or conversely the effects when smoothing consumption using strategies that can be implemented in smart grids. We use this tool to obtain a direct measure of how much the spike and drop intensity can be reduced by smoothing the consumption and see that even a small increase...

Influence of Hydrogen-Based Storage Systems on Self-Consumption and Self-Sufficiency of Residential Photovoltaic Systems

Directory of Open Access Journals (Sweden)

Christian Pötzinger

2015-08-01

Full Text Available This paper analyzes the behavior of residential solar-powered electrical energy storage systems. For this purpose, a simulation model based on MATLAB/Simulink is developed. Investigating both short-time and seasonal hydrogen-based storage systems, simulations on the basis of real weather data are processed on a timescale of 15 min for a consideration period of 3 years. A sensitivity analysis is conducted in order to identify the most important system parameters concerning the proportion of consumption and the degree of self-sufficiency. Therefore, the influences of storage capacity and of storage efficiencies are discussed. A short-time storage system can increase the proportion of consumption by up to 35 percentage points compared to a self-consumption system without storage. However, the seasonal storing system uses almost the entire energy produced by the photovoltaic (PV system (nearly 100% self-consumption. Thereby, the energy drawn from the grid can be reduced and a degree of self-sufficiency of about 90% is achieved. Based on these findings, some scenarios to reach self-sufficiency are analyzed. The results show that full self-sufficiency will be possible with a seasonal hydrogen-based storage system if PV area and initial storage level are appropriate.

Integrated energy and emission management for heavy-duty diesel engines with waste heat recovery system

NARCIS (Netherlands)

Willems, F.P.T.; Kupper, F.; Rascanu, G.; Feru, E.

2015-01-01

Rankine-cycleWasteHeatRecovery (WHR)systems are promising solutions to reduce fuel consumption for trucks. Due to coupling between engine andWHR system, control of these complex systems is challenging. This study presents an integrated energy and emission management strategy for an Euro-VI Diesel

An integrated model to measure service management and physical constraints' effect on food consumption in assisted-living facilities.

Science.gov (United States)

Huang, Hui-Chun; Shanklin, Carol W

2008-05-01

The United States is experiencing remarkable growth in the elderly population, which provides both opportunities and challenges for assisted-living facilities. The objective of this study was to explore how service management influences residents' actual food consumption in assisted-living facilities. Physical factors influencing residents' service evaluation and food consumption also were investigated. A total of 394 questionnaires were distributed to assisted-living residents in seven randomly selected facilities. The questionnaire was developed based on an in-depth literature review and pilot study. Residents' perceived quality evaluations, satisfaction, and physical constraints were measured. Residents' actual food consumption was measured using a plate waste technique. A total of 118 residents in five facilities completed both questionnaires and food consumption assessments. Descriptive, multivariate analyses and structural equation modeling techniques were employed. Service management, including food and service quality and customer satisfaction, was found to significantly influence residents' food consumption. Physical constraints associated with aging, including a decline in health status, chewing problems, sensory loss, and functional disability, also significantly influenced residents' food consumption. A significant relationship was found between physical constraints and customer satisfaction. Foodservice that provides good food and service quality increases customer satisfaction and affects residents' actual food consumption. Physical constraints also influence residents' food consumption directly, or indirectly through satisfaction. The findings suggest that food and nutrition professionals in assisted-living should consider the physical profiles of their residents to enhance residents' satisfaction and nutrient intake. Recommendations for exploring residents' perspectives are discussed.

Hydroponic systems and water management in aquaponics: A review

Directory of Open Access Journals (Sweden)

Carmelo Maucieri

2017-09-01

Full Text Available Aquaponics (AP, the integrated multi-trophic fish and plants production in quasi-closed recirculating system, is one of the newest sustainable food production systems. The hydroponic component of the AP directly influences water quality (in turn influencing fish growth and health, and water consumption (through evapotranspiration of the entire system. In order to assess the role of the design and the management of the hydroponic component on the overall performance, and water consumption of the aquaponics, 122 papers published from 1979 to 2017 were reviewed. Although no unequivocal results were found, the nutrient film technique appears in several aspects less efficient than medium-based or floating raft hydroponics. The best system performance in terms of fish and plant growth, and the highest nutrient removal from water was achieved at water flow between 0.8 L min–1 and 8.0 L min–1. Data on water consumption of aquaponics are scarce, and no correlation between the ratio of hydroponic unit surface/fish tank volume and the system water loss was found. However, daily water loss was positively correlated with the hydroponic surface/fish tank volume ratio if the same experimental conditions and/or systems were compared. The plant species grown in hydroponics influenced the daily water loss in aquaponics, whereas no effect was exerted by the water flow (reciprocating flood/drain cycle or constant flow or type (medium-based, floating or nutrient film technique of hydroponics.

The Fuzzy Logic Method to Efficiently Optimize Electricity Consumption in Individual Housing

Directory of Open Access Journals (Sweden)

Sébastien Bissey

2017-10-01

Full Text Available Electricity demand shifting and reduction still raise a huge interest for end-users at the household level, especially because of the ongoing design of a dynamic pricing approach. In particular, end-users must act as the starting point for decreasing their consumption during peak hours to prevent the need to extend the grid and thus save considerable costs. This article points out the relevance of a fuzzy logic algorithm to efficiently predict short term load consumption (STLC. This approach is the cornerstone of a new home energy management (HEM algorithm which is able to optimize the cost of electricity consumption, while smoothing the peak demand. The fuzzy logic modeling involves a strong reliance on a complete database of real consumption data from many instrumented show houses. The proposed HEM algorithm enables any end-user to manage his electricity consumption with a high degree of flexibility and transparency, and “reshape” the load profile. For example, this can be mainly achieved using smart control of a storage system coupled with remote management of the electric appliances. The simulation results demonstrate that an accurate prediction of STLC gives the possibility of achieving optimal planning and operation of the HEM system.

Controlled cooling of an electronic system for reduced energy consumption

Science.gov (United States)

David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

2016-08-09

Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

Controlled cooling of an electronic system for reduced energy consumption

Energy Technology Data Exchange (ETDEWEB)

David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

2018-01-30

Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

Establishment of windows-based load management system for electricity cost savings in competitive electricity markets

International Nuclear Information System (INIS)

Chung, K.H.; Kim, B.H.; Hur, D.

2007-01-01

For electricity markets to function in a truly competitive and efficient manner, it is not enough to focus solely on improving the efficiencies of power supply. To recognize price-responsive load as a reliability resource, the customer must be provided with price signals and an instrument to respond to these signals, preferably automatically. This paper attempts to develop the Windows-based load management system in competitive electricity markets, allowing the user to monitor the current energy consumption or billing information, to analyze the historical data, and to implement the consumption strategy for cost savings with nine possible scenarios adopted. Finally, this modeling framework will serve as a template containing the basic concepts that any load management system should address. (author)

Limiting biomass consumption for heating in 100% renewable energy systems

DEFF Research Database (Denmark)

Mathiesen, Brian Vad; Lund, Henrik; Connolly, David

2012-01-01

-scale solar thermal, large heat pumps, geothermal heat, industrial surplus heat, and waste incineration. Where the energy density in the building stock is not high enough for DH to be economical, geothermal heat pumps can be recommended for individual heating systems, even though biomass consumption is higher......The utilisation of biomass poses large challenges in renewable energy systems while buildings account for a substantial part of the energy supply even in 100% renewable energy systems. In this paper the focus is on how the heating sector can reduce its consumption of biomass, thus leaving biomass...... for other sectors, but while still enabling a 100% renewable energy system. The analyses of heating technologies shows that district heating (DH) systems are important in limiting the dependence on biomass and create cost effective solutions. DH systems are especially important in renewable energy systems...

Appliance based control for Home Power Management Systems

International Nuclear Information System (INIS)

Özkan, Hanife Apaydın

2016-01-01

This study scrutinizes energy-friendly smart home appliances (hereafter ‘smart appliances’), control of these appliances and their effects on the efficient use of energy. To accomplish this, smart appliances and their operation principles are introduced and their energy savings compared to conventional appliances are analyzed using precise measurements. Then, a real-time Appliance-based Home Power Management System (Ab-HPMS) which manages power consumption of smart appliances and that of the house as a whole is proposed. For Ab-HPMS, an appliance control algorithm, called Appliance-based Rolling Wave Planning (Ab-RWP), is developed with the aim of reducing electricity cost and improving energy efficiency while maintaining user comfort. Ab-RWP algorithm interacts with appliances in a priority order based on user comfort which is determined by utilizing their smart operational characteristics. Operations of smart appliances and their integrations with Ab-HPMS are modeled with Petri nets to verify that they meet the requirements expressed in the specifications. Simulation results demonstrate that proposed Ab-HPMS provides improvements in terms of the energy consumption reduction of about 5%–16%, cost reduction of about 10%–24% and peak reduction at high demand period of about 38%–53% compared to conventional appliances usage. - Highlights: • The effects of smart home appliances on energy saving are investigated. • Petri nets models of smart appliances are developed to simulate their operations in smart home. • A real-time appliance-based home power management system (Ab-HPMS) is proposed. • Power density function is evaluated to interrupt the operation of smart washing machine.

Energy Management in Prosumer Communities: A Coordinated Approach

Directory of Open Access Journals (Sweden)

Rodrigo Verschae

2016-07-01

Full Text Available The introduction of uncontrollable renewable energy is having a positive impact on our health, the climate, and the economy, but it is also pushing the limits of the power system. The main reason for this is that, in any power system, the generation and consumption must match each other at all times. Thus, if we want to further introduce uncontrollable generation, we need a large ability to manage the demand. However, the ability to control the power consumption of existing demand management approaches is limited, and most of these approaches cannot contribute to the introduction of reneweables, because they do not consider distributed uncontrolled consumption and generation in the control. Furthermore, these methods do not allow users to exchange or jointly manage their power generation and consumption. In this context, we propose an augmented energy management model for prosumers (i.e., producer and consumer. This model considers controlled and uncontrolled generation and consumption, as well as the prosumer’s ability (i to plan the intended power consumption; and (ii to manage real-time deviations from the intended consumption. We apply this model to the energy management of prosumer communities, by allowing the prosumers to coordinate their power consumption plan, to manage the deviations from the intended consumption, and to help each other by compensating deviations. The proposed approach seeks to enhance the power system, and to enable a prosumer society that takes account social and environmental issues, as well as each prosumer’s quality of life.

Primary Health Care Software-A Computer Based Data Management System

Directory of Open Access Journals (Sweden)

Tuli K

1990-01-01

Full Text Available Realising the duplication and time consumption in the usual manual system of data collection necessitated experimentation with computer based management system for primary health care in the primary health centers. The details of the population as available in the existing manual system were used for computerizing the data. Software was designed for data entry and analysis. It was written in Dbase III plus language. It was so designed that a person with no knowledge about computer could use it, A cost analysis was done and the computer system was found more cost effective than the usual manual system.

Energy and environmental management information systems

Energy Technology Data Exchange (ETDEWEB)

Martin, P.K. (Energy Auditing Agency Ltd., Milton Keynes (United Kingdom))

1993-01-01

The threat of global warming, environmental instability and the possible use of green or carbon taxes on fossil fuels has increased the need for energy efficiency. Energy Conservation is now recognised as one of the easiest and most cost-effective ways of limiting or reducing CO[sub 2] emissions. Large UK companies are now assessing how much CO[sub 2] they dissipate to the environment and reviewing strategies to reduce this either in response to consumer demand or as a corporate policy decision. Computer-based information systems already exist to monitor and report on fluctuations in energy consumption. These are called Monitoring and Targeting (M and T) systems. This paper explains what M and T systems are and how they are being extended to cover reporting on corporate fuel-based CO[sub 2] emissions to help provide an integrated energy and environmental-management information system. (author).

uFLIP: Understanding the Energy Consumption of Flash Devices

DEFF Research Database (Denmark)

Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

2010-01-01

Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

China's numerical management system for reducing national energy intensity

International Nuclear Information System (INIS)

Li, Huimin; Zhao, Xiaofan; Yu, Yuqing; Wu, Tong; Qi, Ye

2016-01-01

In China, the national target for energy intensity reduction, when integrated with target disaggregation and information feedback systems, constitutes a numerical management system, which is a hallmark of modern governance. This paper points out the technical weaknesses of China's current numerical management system. In the process of target disaggregation, the national target cannot be fully disaggregated to local governments, sectors and enterprises without omissions. At the same time, governments at lower levels face pressure for reducing energy intensity that exceeds their respective jurisdictions. In the process of information feedback, information failure is inevitable due to statistical inaccuracy. Furthermore, the monitoring system is unable to correct all errors, and data verification plays a limited role in the examination system. To address these problems, we recommend that the government: use total energy consumption as the primary indicator of energy management; reform the accounting and reporting of energy statistics toward greater consistency, timeliness and transparency; clearly define the responsibility of the higher levels of government. - Highlights: •We assess drawbacks of China's numerical management system for energy intensity. •The national energy intensity target cannot be fully disaggregated without omissions. •Data distortion is due to failures in statistics, monitoring and examination system. •Lower-level governments’ ability to meet energy target is weaker than their pressure. •We provide three policy recommendations for China's policy-makers.

A hybrid society model for simulating residential electricity consumption

International Nuclear Information System (INIS)

Xu, Minjie; Hu, Zhaoguang; Wu, Junyong; Zhou, Yuhui

2008-01-01

In this paper, a hybrid social model of econometric model and social influence model is proposed for evaluating the influence of pricing policy and public education policy on residential habit of electricity using in power resources management. And, a hybrid society simulation platform based on the proposed model, called residential electricity consumption multi-agent systems (RECMAS), is designed for simulating residential electricity consumption by multi-agent system. RECMAS is composed of consumer agent, power supplier agent, and policy maker agent. It provides the policy makers with a useful tool to evaluate power price policies and public education campaigns in different scenarios. According to an influenced diffusion mechanism, RECMAS can simulate the residential electricity demand-supply chain and analyze impacts of the factors on residential electricity consumption. Finally, the proposed method is used to simulate urban residential electricity consumption in China. (author)

A hybrid society model for simulating residential electricity consumption

Energy Technology Data Exchange (ETDEWEB)

Xu, Minjie [School of Electrical Engineering, Beijing Jiaotong University, Beijing (China); State Power Economic Research Institute, Beijing (China); Hu, Zhaoguang [State Power Economic Research Institute, Beijing (China); Wu, Junyong; Zhou, Yuhui [School of Electrical Engineering, Beijing Jiaotong University, Beijing (China)

2008-12-15

In this paper, a hybrid social model of econometric model and social influence model is proposed for evaluating the influence of pricing policy and public education policy on residential habit of electricity using in power resources management. And, a hybrid society simulation platform based on the proposed model, called residential electricity consumption multi-agent systems (RECMAS), is designed for simulating residential electricity consumption by multi-agent system. RECMAS is composed of consumer agent, power supplier agent, and policy maker agent. It provides the policy makers with a useful tool to evaluate power price policies and public education campaigns in different scenarios. According to an influenced diffusion mechanism, RECMAS can simulate the residential electricity demand-supply chain and analyze impacts of the factors on residential electricity consumption. Finally, the proposed method is used to simulate urban residential electricity consumption in China. (author)

Energy efficiency analysis considering the use of an intelligent systems management in a smart home

OpenAIRE

Morais, H.; Fernandes, Filipe; Faria, Pedro; Vale, Zita

2012-01-01

In this abstract is presented an energy management system included in a SCADA system existent in a intelligent home. The system control the home energy resources according to the players definitions (electricity consumption and comfort levels), the electricity prices variation in real time mode and the DR events proposed by the aggregators.

On the energy consumption of cryogenic systems and the choice of cryopumps

International Nuclear Information System (INIS)

Kholod, Yu.V.; Yuferov, V.B.

1981-01-01

Energy consumption during the mutual use of cryogenic magnetic and vacuum systems including superconductina magnet, forevacuum and high vacuum cryopumps, is analyzed. The portion of energy consumption on preliminary condensational pumping-out of vaccuum chamber with volume of 6 m 3 for the considered case does not exceed 12% and decreases in time. Summary portion of energy consumption on operation of forevacuum and high vacuum cryopumps does not exceed one third of energy consumption on preliminary cooling of superconducting magnet and decreases to 10% during stationary operation of cryogenic system during 85O hours. A comparison of general and specific energy consumptions during the operation of different condensational cryopumps as well as of forevacuum condensational and sorption pumps is made. A conclusion is made that at small periods of time (tens of hours) of cryovacuum system operation it is expidient to use one cryopump with a wide range of working pressures (atmosphere-superhigh vacuum) instead of a combination of forevacuum and high vacuum cryopumps. Besides, a conclusion is made on expediency of the use of nitrogen condensational pumps instead of nitrogen cryosorption ones in the range of high pressures (760-10 mm Hg) expecially during the pumping out of vacuum chambers of high volume (1m 3 and higher). It is shown that account of energy consumptions on preliminary cooling of cryopumps and high vacuum ones in particular, at small (tens of hours) times of their operation increases average specific energy consumptions about 3 times. It is concluded that one can disregard the energy consumption used for preliminary cooling of cryopumps only in case of their stationary operation during about 10 3 hours [ru

Fuelwood consumption in Newfoundland

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

This study was undertaken to get a first estimate of fuelwood consumption for the island of Newfoundland for the period April 1, 1977 to March 31, 1978. Available literature was reviewed and an assessment made on the existing data collection systems on fuelwood consumption used by the various forestry agencies in the province. A personal interview telephone survey on fuelwood use was conducted for most parts of the Island that had access to wood supplies. Householders were asked how much wood they burned, when they started burning wood, type of wood burning unit used, other sources of heat used, reasons for burning wood, employment, distance travelled to obtain wood, and expected consumption in 1978-79 compared to 1977-78. It was found that the estimated number of households burning wood increased to ca 32,000 in 1977-78. There was a further estimated increase to about 39,500 in 1978-79. In 1977-78, it was estimated that 461,571 stacked cubic metres of fuelwood were consumed on the Island. This was broken down into 318,916 m/sup 3/ of softwood and 142,655 m/sup 3/ of hardwood. Although the statistical methodology used may have led to an overestimate of the volume of wood consumed, the criteria used in the selection of households had the opposite effect in that the volume consumed by a large number of casual wood burners (less than 3 stacked m/sup 3/) was omitted from the estimate. Fuelwood consumption accounted for anywhere from 1% to 77% of the calculated allowable annual cut for the various forest management units on the Island for 1977-78. Overall, fuelwood consumption estimated by the survey accounted for 8% of the estimated allowable annual cut. Use of wood as a fuel is expected to continue increasing and it is recommended that estimates of consumption be periodically updated so that forest management plans can make adequate provision for this demand in future. 5 refs., 16 figs., 7 tabs.

A Causal and Real-Time Capable Power Management Algorithm for Off-Highway Hybrid Propulsion Systems

Directory of Open Access Journals (Sweden)

Johannes Schalk

2016-12-01

Full Text Available Hybrid propulsion systems allow for a reduction of fuel consumption and pollutant emissions of future off-highway applications. A challenging aspect of a hybridization is the larger number of system components that further increases both the complexity and the diversification of such systems. Hence, beside a standardization on the hardware side for off-highway systems, a high flexibility and modularity of the control schemes is required to employ them in as many different applications as possible. In this paper, a causal optimization-based power management algorithm is introduced to control the power split between engine and electric machine in a hybrid powertrain. The algorithm optimizes the power split to achieve the maximum power supply efficiency and, thereby, considers the energy cost for maintaining the battery charge. Furthermore, the power management provides an optional function to control the battery state of charge in such a way that a target value is attained. In a simulation case study, the potential and the benefits of the proposed power management for the hybrid powertrain—aiming at a reduction of the fuel consumption of a DMU (diesel multiple unit train operated on a representative track—will be shown.

Modeling electric load and water consumption impacts from an integrated thermal energy and rainwater storage system for residential buildings in Texas

International Nuclear Information System (INIS)

Upshaw, Charles R.; Rhodes, Joshua D.; Webber, Michael E.

2017-01-01

Highlights: • Hydronic integrated rainwater thermal storage (ITHERST) system concept presented. • ITHERST system modeled to assess peak electric load shifting and water savings. • Case study shows 75% peak load reduction and 9% increase in energy consumption. • Potable rainwater collection could provide ∼50–90% of water used for case study. - Abstract: The United States’ built environment is a significant direct and indirect consumer of energy and water. In Texas, and other parts of the Southern and Western US, air conditioning loads, particularly from residential buildings, contribute significantly to the peak electricity load on the grid, straining transmission. In parallel, water resources in these regions are strained by growing populations and shrinking supplies. One potential method to address both of these issues is to develop integrated thermal energy and auxiliary water (e.g. rainwater, greywater, etc.) storage and management systems that reduce peak load and freshwater consumption. This analysis focuses on a proposed integrated thermal energy and rainwater storage (ITHERST) system that is incorporated into a residential air-source chiller/heat pump with hydronic distribution. This paper describes a step-wise hourly thermodynamic model of the thermal storage system to assess on-peak performance, and a daily volume-balance model of auxiliary water collection and consumption to assess water savings potential. While the model is generalized, this analysis uses a case study of a single family home in Austin, Texas to illustrate its capabilities. The results indicate this ITHERST system could reduce on-peak air conditioning electric power demand by over 75%, with increased overall electric energy consumption of approximately 7–9%, when optimally sized. Additionally, the modeled rainwater collection reduced municipal water consumption by approximately 53–89%, depending on the system size.

Life cycle assessment of two biowaste management systems for Barcelona, Spain

International Nuclear Information System (INIS)

Gueereca, Leonor Patricia; Gasso, Santiago; Baldasano, Jose Maria; Jimenez-Guerrero, Pedro

2006-01-01

A life cycle assessment (LCA) is performed in this study in order to evaluate the environmental implications of the management of the fermentable fraction of waste in the Barcelona Metropolitan Area (BMA), comparing the present management system with the system proposed for the future. The energy and water consumption were quantified, as well as the used area and the emissions to the atmosphere and water. The software TRACI was used in order to assess the potential impact on the categories of acidification, eutrophication, toxicity and harm to the human health (under the criteria of cancer, non-cancer and pollutants), global warming, depletion of the ozone layer, formation of photochemical smog, water use, land use and fossil fuel use. The results show that the management system proposed for the future reduces 7 out of the 12 potential impacts analyzed, due mainly to the change in the technology of landfill (baling-wrapping landfill). However, this system requires of further research to assess the impacts on a long term. The worst option for biowaste management is the traditional landfill, based on the multibarrier concept. The results of this work suggest that the future biowaste management system is better in environmental terms than the present system. (author)

The design and implementation of a garbage truck fleet management system

Directory of Open Access Journals (Sweden)

Chen, C. H.

2016-05-01

Full Text Available In recent years, the improvement of cloud computing and mobile computing techniques has led to the availability of a variety of mobile applications (‘apps’ in the app store. For instance, a garbage truck app that can provide the immediate location of a garbage truck, the location of collection points, and forecasted arrival times of garbage trucks would be useful for mobile users. Since the power consumption of apps on mobile devices if of concern to mobile users, an optimised power-saving mechanism for updating messages, which is based on location information, for a proposed garbage truck fleet management system (GTFMS is proposed and implemented in this paper. The GTFMS is a three- component system that includes the on-board units on garbage trucks, a fleet management system, and a garbage truck app. In this study, an arrival time forecasting method is designed and implemented in the fleet management system, so that the garbage truck app can retrieve the forecasted arrival time via web services. A message updating event is then triggered that reports the location of garbage truck and the forecasted arrival time. In experiments conducted on case studies, the results showed that the mean accuracy of predicted arrival time by the proposed method is about 81.45 per cent. As for power consumption, the cost of traditional mobile apps is 2,880 times that of the mechanism proposed in this study. Consequently, the GTFMS can provide the precise forecasted arrival time of garbage trucks to mobile users, while consuming less power.

The energy consumption of control systems; Het energiegebruik van regelinstallaties

Energy Technology Data Exchange (ETDEWEB)

Van Gulik, A.R.; De Wildt, M.G. [Grontmij Nederland, Amersfoort (Netherlands)

2013-07-15

Control systems for e.g. indoor climate and illumination are essential in modern building services, and useful for comfort or energy conservation. Energy conservation is of course an important aim, but what is the energy consumption of the control systems? Is the consumption higher than the savings? This question was subject of a comprehensive study, with measurements and simulation calculations. It can be concluded that the energy consumption of control installation for spaces is substantial [Dutch] Regelinstallaties voor bijvoorbeeld klimaatregeling, verlichtingsregeling en domotica zijn niet meer weg te denken uit de moderne installatietechniek, of ze nu dienen voor comfort, gemak of energiebesparing. Maar hoeveel energie gebruiken deze installaties eigenlijk? Voor ontwerpers blijkt dit helemaal geen issue te zijn terwijl adviseurs, installateurs en zelfs fabrikanten zeggen hiervan geen idee te hebben. Door metingen en het gebruik van berekeningsmodellen is vastgesteld wat het energiegebruik van regelinstallaties op jaarbasis is. Dit blijkt substantieel te zijn, maar er zijn mogelijkheden om het gebruik te reduceren.

The Influence of U.S. Chain Restaurant Food Consumption and Obesity in China and South Korea: An Ecological Perspective of Food Consumption, Self-Efficacy in Weight Management, Willingness to Communicate About Weight/Diet, and Depression.

Science.gov (United States)

Wright, Kevin B; Mazzone, Raphael; Oh, Hyun; Du, Joshua; Smithson, Anne-Bennett; Ryan, Diane; MacNeil, David; Tong, Xing; Stiller, Carol

2016-11-01

This study examined the impact of U.S. chain restaurant food consumption in China and South Korea from an ecological perspective. Specifically, it explored the relationships among several environmental and individual variables that have been found to affect obesity/weight management in previous research, including the prevalence/popularity of U.S. chain restaurants in these countries, frequency of U.S. chain restaurant food consumption, self-efficacy in weight management, willingness to communicate about weight/diet, self-perceptions of weight/obesity stigma, body mass index (BMI), and depression. The results indicated that willingness to communicate about weight/diet predicted increased self-efficacy in weight management. Higher BMI scores were found to predict increased weight/obesity stigma, and increased frequency of U.S. restaurant food consumption, weight/obesity stigma, and reduced self-efficacy in weight management were found to predict increased levels of depression. The theoretical and practical implications of the findings are discussed, along with limitations and directions for future research.

Social control in online communities of consumption: a framework for community management

OpenAIRE

Sibai, Olivier; de Valck, K.; Farrell, A.M.; Rudd, J.M.

2015-01-01

Online communities of consumption (OCCs) represent highly diverse groups of consumers whose interests are not always aligned. Social control in OCCs aims to effectively manage problems arising from this heterogeneity. Extant literature on social control in OCCs is fragmented as some studies focus on the principles of social control, while others focus on the implementation. Moreover, the domain is undertheorized. This article integrates the disparate literature on social control in OCCs provi...

A Novel Web Service Based Home Energy Management System

DEFF Research Database (Denmark)

Rossello Busquet, Ana; Soler, José

2011-01-01

and optimize the energy consumption in home environments. The main element of HEMS is the home gateway. In this paper, a home gateway suitable for HEMS is presented. The home gateway proposed uses rules to implement the home energy management system. The rules can be downloaded though web services from a rule...... server. Furthermore, web services are used to provide modularity to the home gateway by enabling the deployment of the different logical components into different devices, if necessary....

System-Level Power Consumption Analysis of the Wearable Asthmatic Wheeze Quantification

Directory of Open Access Journals (Sweden)

Dinko Oletic

2018-01-01

Full Text Available Long-term quantification of asthmatic wheezing envisions an m-Health sensor system consisting of a smartphone and a body-worn wireless acoustic sensor. As both devices are power constrained, the main criterion guiding the system design comes down to minimization of power consumption, while retaining sufficient respiratory sound classification accuracy (i.e., wheeze detection. Crucial for assessment of the system-level power consumption is the understanding of trade-off between power cost of computationally intensive local processing and communication. Therefore, we analyze power requirements of signal acquisition, processing, and communication in three typical operating scenarios: (1 streaming of uncompressed respiratory signal to a smartphone for classification, (2 signal streaming utilizing compressive sensing (CS for reduction of data rate, and (3 respiratory sound classification onboard the wearable sensor. Study shows that the third scenario featuring the lowest communication cost enables the lowest total sensor system power consumption ranging from 328 to 428 μW. In such scenario, 32-bit ARM Cortex M3/M4 cores typically embedded within Bluetooth 4 SoC modules feature the optimal trade-off between onboard classification performance and consumption. On the other hand, study confirms that CS enables the most power-efficient design of the wearable sensor (216 to 357 μW in the compressed signal streaming, the second scenario. In such case, a single low-power ARM Cortex-A53 core is sufficient for simultaneous real-time CS reconstruction and classification on the smartphone, while keeping the total system power within budget for uncompressed streaming.

Control of Refrigeration Systems for Trade-off between Energy Consumption and Food Quality Loss

DEFF Research Database (Denmark)

Cai, Junping

In supermarkets, control strategies determine both the energy consumption of refrigeration systems and the quality loss of refrigerated foodstuffs. The question is, what can be done to optimize the balance between quality loss and energy consumption? This thesis tries to answer this question...... by applying two main optimization strategies to traditional refrigeration systems. The first strategy is a new defrost-on-demand scheme, which based on an objective function between quality loss and energy consumption, continuously seeks an optimal time interval for defrosting in dynamic situation. The second...... strategy is through utilization of the thermal mass of the refrigerated foodstuffs, the day-night temperature variation and the capacity control of the compressor, to realize a trade-off between system energy consumption and food quality loss....

DC-based smart PV-powered home energy management system based on voltage matching and RF module

Science.gov (United States)

Hasan, W. Z. W.

2017-01-01

The main tool for measuring system efficiency in homes and offices is the energy monitoring of the household appliances’ consumption. With the help of GUI through a PC or smart phone, there are various applications that can be developed for energy saving. This work describes the design and prototype implementation of a wireless PV-powered home energy management system under a DC-distribution environment, which allows remote monitoring of appliances’ energy consumptions and power rate quality. The system can be managed by a central computer, which obtains the energy data based on XBee RF modules that access the sensor measurements of system components. The proposed integrated prototype framework is characterized by low power consumption due to the lack of components and consists of three layers: XBee-based circuit for processing and communication architecture, solar charge controller, and solar-battery-load matching layers. Six precise analogue channels for data monitoring are considered to cover the energy measurements. Voltage, current and temperature analogue signals were accessed directly from the remote XBee node to be sent in real time with a sampling frequency of 11–123 Hz to capture the possible surge power. The performance shows that the developed prototype proves the DC voltage matching concept and is able to provide accurate and precise results. PMID:28934271

DC-based smart PV-powered home energy management system based on voltage matching and RF module.

Directory of Open Access Journals (Sweden)

Ahmad H Sabry

Full Text Available The main tool for measuring system efficiency in homes and offices is the energy monitoring of the household appliances' consumption. With the help of GUI through a PC or smart phone, there are various applications that can be developed for energy saving. This work describes the design and prototype implementation of a wireless PV-powered home energy management system under a DC-distribution environment, which allows remote monitoring of appliances' energy consumptions and power rate quality. The system can be managed by a central computer, which obtains the energy data based on XBee RF modules that access the sensor measurements of system components. The proposed integrated prototype framework is characterized by low power consumption due to the lack of components and consists of three layers: XBee-based circuit for processing and communication architecture, solar charge controller, and solar-battery-load matching layers. Six precise analogue channels for data monitoring are considered to cover the energy measurements. Voltage, current and temperature analogue signals were accessed directly from the remote XBee node to be sent in real time with a sampling frequency of 11-123 Hz to capture the possible surge power. The performance shows that the developed prototype proves the DC voltage matching concept and is able to provide accurate and precise results.

DC-based smart PV-powered home energy management system based on voltage matching and RF module.

Science.gov (United States)

Sabry, Ahmad H; Hasan, W Z W; Ab Kadir, Mza; Radzi, M A M; Shafie, S

2017-01-01

The main tool for measuring system efficiency in homes and offices is the energy monitoring of the household appliances' consumption. With the help of GUI through a PC or smart phone, there are various applications that can be developed for energy saving. This work describes the design and prototype implementation of a wireless PV-powered home energy management system under a DC-distribution environment, which allows remote monitoring of appliances' energy consumptions and power rate quality. The system can be managed by a central computer, which obtains the energy data based on XBee RF modules that access the sensor measurements of system components. The proposed integrated prototype framework is characterized by low power consumption due to the lack of components and consists of three layers: XBee-based circuit for processing and communication architecture, solar charge controller, and solar-battery-load matching layers. Six precise analogue channels for data monitoring are considered to cover the energy measurements. Voltage, current and temperature analogue signals were accessed directly from the remote XBee node to be sent in real time with a sampling frequency of 11-123 Hz to capture the possible surge power. The performance shows that the developed prototype proves the DC voltage matching concept and is able to provide accurate and precise results.

Model Predictive Control for Flexible Power Consumption of Large-Scale Refrigeration Systems

DEFF Research Database (Denmark)

Shafiei, Seyed Ehsan; Stoustrup, Jakob; Rasmussen, Henrik

2014-01-01

A model predictive control (MPC) scheme is introduced to directly control the electrical power consumption of large-scale refrigeration systems. Deviation from the baseline of the consumption is corresponded to the storing and delivering of thermal energy. By virtue of such correspondence...

Quality management system

Energy Technology Data Exchange (ETDEWEB)

Lee, Mu Sung

2009-08-15

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

Quality management system

International Nuclear Information System (INIS)

Lee, Mu Sung

2009-08-01

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

Succeeding in Business by Managing Consumption

DEFF Research Database (Denmark)

Tan, Adrian; Evans, Stephen; McAloone, Tim C.

2009-01-01

consumerism that has since spurred global economic wealth and improved the lives of billions of people. Today it is apparent that the effects of the current industrial systems on our natural environment and consequently our own well-being are unsustainable. Manufacturing firms have traditionally succeeded...... between customers and the company. Half of their business is from existing customers, and considering the durability and long product life, this is very high. • SCA Hygiene Products is a global manufacturer of paper based hygiene products (paper towels, nappies, feminine hygiene products, etc...... in business by selling as much as they could produce. Designers constantly created new products, factories produced them as fast and cheap as possible and marketing encouraged demand – all contributing to ever increasing levels of natural resource consumption. It was of little concern what happened...

Reconfiguration of photovoltaic panels for reducing the hydrogen consumption in fuel cells of hybrid systems

Directory of Open Access Journals (Sweden)

Daniel González-Montoya

2017-05-01

Full Text Available Hybrid generation combines advantages from fuel cell systems with non-predictable generation approaches, such as photovoltaic and wind generators. In such hybrid systems, it is desirable to minimize as much as possible the fuel consumption, for the sake of reducing costs and increasing the system autonomy. This paper proposes an optimization algorithm, referred to as population-based incremental learning, in order to maximize the produced power of a photovoltaic generator. This maximization reduces the fuel consumption in the hybrid aggregation. Moreover, the algorithm's speed enables the real-time computation of the best configuration for the photovoltaic system, which also optimizes the fuel consumption in the complementary fuel cell system. Finally, a system experimental validation is presented considering 6 photovoltaic modules and a NEXA 1.2KW fuel cell. Such a validation demonstrates the effectiveness of the proposed algorithm to reduce the hydrogen consumption in these hybrid systems.

Power consumption analysis of operating systems for wireless sensor networks.

Science.gov (United States)

Lajara, Rafael; Pelegrí-Sebastiá, José; Perez Solano, Juan J

2010-01-01

In this paper four wireless sensor network operating systems are compared in terms of power consumption. The analysis takes into account the most common operating systems--TinyOS v1.0, TinyOS v2.0, Mantis and Contiki--running on Tmote Sky and MICAz devices. With the objective of ensuring a fair evaluation, a benchmark composed of four applications has been developed, covering the most typical tasks that a Wireless Sensor Network performs. The results show the instant and average current consumption of the devices during the execution of these applications. The experimental measurements provide a good insight into the power mode in which the device components are running at every moment, and they can be used to compare the performance of different operating systems executing the same tasks.

Beverage Consumption and Adult Weight Management: A Review

OpenAIRE

Dennis, Elizabeth A.; Flack, Kyle D.; Davy, Brenda M.

2009-01-01

Total energy consumption among United States adults has increased in recent decades, and energy-containing beverages are a significant contributor to this increase. Because beverages are less satiating than solid foods, consumption of energy-containing beverages may increase energy intake and lead to weight gain; trends in food and beverage consumption coinciding with increases in overweight and obesity support this possibility. The purpose of this review is to present what is known about the...

Development of the environmental data management system

International Nuclear Information System (INIS)

Tatebe, Kazuaki; Suzuki, Yurina; Shirato, Seiichi; Sato, Yoshinori

2012-02-01

The recent society requires business activities with environmental consideration to every enterprise. Also, Japanese laws require those activities. For example, 'Law Concerning the Promotion of Business Activities with Environmental Consideration by Specified Corporations, etc, by Facilitating Access to Environmental Information, and Other Measures' (Environmental Consideration Law) mandates publication of a report relating to the activities of environmental consideration to each enterprise above designated size. 'Act on the Rational Use of Energy' mandates the report of the results of energy consumption and the long-term plan of the rational use of energy. Moreover, 'Act on Promotion of Global Warming Countermeasures' mandates the report of the greenhouse gas emissions. In addition to those, 'Water Pollution Control Law', 'Waste Management and Public Cleaning Law' and other environmental laws as well as environmental ordinances require business activities with environmental consideration to all companies. So, it is very important for Japan Atomic Energy Agency (JAEA) to report business activities with environmental consideration in order to build up trustful relations with the nation and communities. The Environmental Data Management System has been developed as the data base of business activities with environmental consideration in JAEA and as the means to promote the activities at every site and office of JAEA. This report summarizes the structure of the Environmental Data Management System, kinds of environmental performance data treated by the system, and gathering methods of the data. (author)

An Efficient Approach for Energy Consumption Optimization and Management in Residential Building Using Artificial Bee Colony and Fuzzy Logic

Directory of Open Access Journals (Sweden)

Fazli Wahid

2016-01-01

Full Text Available The energy management in residential buildings according to occupant’s requirement and comfort is of vital importance. There are many proposals in the literature addressing the issue of user’s comfort and energy consumption (management with keeping different parameters in consideration. In this paper, we have utilized artificial bee colony (ABC optimization algorithm for maximizing user comfort and minimizing energy consumption simultaneously. We propose a complete user friendly and energy efficient model with different components. The user set parameters and the environmental parameters are inputs of the ABC, and the optimized parameters are the output of the ABC. The error differences between the environmental parameters and the ABC optimized parameters are inputs of fuzzy controllers, which give the required energy as the outputs. The purpose of the optimization algorithm is to maximize the comfort index and minimize the error difference between the user set parameters and the environmental parameters, which ultimately decreases the power consumption. The experimental results show that the proposed model is efficient in achieving high comfort index along with minimized energy consumption.

Energy-aware memory management for embedded multimedia systems a computer-aided design approach

CERN Document Server

Balasa, Florin

2011-01-01

Energy-Aware Memory Management for Embedded Multimedia Systems: A Computer-Aided Design Approach presents recent computer-aided design (CAD) ideas that address memory management tasks, particularly the optimization of energy consumption in the memory subsystem. It explains how to efficiently implement CAD solutions, including theoretical methods and novel algorithms. The book covers various energy-aware design techniques, including data-dependence analysis techniques, memory size estimation methods, extensions of mapping approaches, and memory banking approaches. It shows how these techniques

Measuring household consumption and waste in unmetered, intermittent piped water systems

Science.gov (United States)

Kumpel, Emily; Woelfle-Erskine, Cleo; Ray, Isha; Nelson, Kara L.

2017-01-01

Measurements of household water consumption are extremely difficult in intermittent water supply (IWS) regimes in low- and middle-income countries, where water is delivered for short durations, taps are shared, metering is limited, and household storage infrastructure varies widely. Nonetheless, consumption estimates are necessary for utilities to improve water delivery. We estimated household water use in Hubli-Dharwad, India, with a mixed-methods approach combining (limited) metered data, storage container inventories, and structured observations. We developed a typology of household water access according to infrastructure conditions based on the presence of an overhead storage tank and a shared tap. For households with overhead tanks, container measurements and metered data produced statistically similar consumption volumes; for households without overhead tanks, stored volumes underestimated consumption because of significant water use directly from the tap during delivery periods. Households that shared taps consumed much less water than those that did not. We used our water use calculations to estimate waste at the household level and in the distribution system. Very few households used 135 L/person/d, the Government of India design standard for urban systems. Most wasted little water even when unmetered, however, unaccounted-for water in the neighborhood distribution systems was around 50%. Thus, conservation efforts should target loss reduction in the network rather than at households.

Design and simulation of a fuel cell hybrid emergency power system for a more electric aircraft: Evaluation of energy management schemes

Science.gov (United States)

Njoya Motapon, Souleman

As the aircraft industries are moving toward more electric aircraft (MEA), the electrical peak load seen by the main and emergency generators becomes higher than in conventional aircraft. Consequently, there is a major concern regarding the aircraft emergency system, which consists of a ram air turbine (RAT) or air driven generator (ADG), to fulfill the load demand during critical situations; particularly at low aircraft speed where the output power is very low. A potential solution under study by most aircraft manufacturers is to replace the air turbine by a fuel cell hybrid system, consisting of fuel cell combined with other high power density sources such as supercapacitors or lithium-ion batteries. To ensure the fuel cell hybrid system will be able to meet the load demand, it must be properly designed and an effective energy management strategy must be tested with real situations load profile. This work aims at designing a fuel cell emergency power system of a more electric aircraft and comparing different energy management schemes (EMS); with the goal to ensure the load demand is fully satisfied within the constraints of each energy source. The fuel cell hybrid system considered in this study consists of fuel cell, lithium-ion batteries and supercapacitors, along with associated DC-DC and DC-AC converters. The energy management schemes addressed are state-of-the-art, most commonly used energy management techniques in fuel cell vehicle applications and include: the state machine control strategy, the rule based fuzzy logic strategy, the classical PI control strategy, the frequency decoupling/fuzzy logic control strategy and the equivalent consumption minimization strategy (ECMS). Moreover, a new optimal scheme based on maximizing the instantaneous energy of batteries/supercapacitors, to improve the fuel economy is proposed. An off-line optimization based scheme is also developed to ascertain the validity of the proposed strategy in terms of fuel consumption

Energy management system based on standard 50001 in the company Feed Cienfuegos

International Nuclear Information System (INIS)

Monteagudo Yanes, José P.; Crespo Sánchez, Gustavo; Montesino Pérez, Milagros; Cruz Virosa, Ibis; Cabrera Sánchez, Jorge Luis

2017-01-01

The energy management in manufacturing of balanced feed requires the Company Feed Cienfuegos to have systems and processes that enable efficiency and quality in production, improve energy performance and increase their competitiveness. Technology of Total Efficient Energy Management (TTEEM) and Cuban Standard ISO 50001 that are promoted and researched by the Center for Studies of Energy and Environment (CEEMA), of the University of Cienfuegos and the necessity and possibility of this Company to improve energy management allowed undertaking this project. Getting and use of energy performance indicator against production and the energy base line for daily control of energy consumption allowed decreasing from 12.8 kWh/t on average, to values below 10 kWh/t for the same production levels (500t/day). This result represents the reduction of energy consumption in the order of 364,000 kWh/year and consequently 15% of the energy item costs. This result is equivalent in cost of generation to 120 tons of oil/year, which at current oil prices mean a savings of $ 6,000 USD/year. (author)

Optimal energy management of a hybrid electric powertrain system using improved particle swarm optimization

International Nuclear Information System (INIS)

Chen, Syuan-Yi; Hung, Yi-Hsuan; Wu, Chien-Hsun; Huang, Siang-Ting

2015-01-01

Highlights: • Online sub-optimal energy management using IPSO. • A second-order HEV model with 5 major segments was built. • IPSO with equivalent-fuel fitness function using 5 particles. • Engine, rule-based control, PSO, IPSO and ECMS are compared. • Max. 31+% fuel economy and 56+% energy consumption improved. - Abstract: This study developed an online suboptimal energy management system by using improved particle swarm optimization (IPSO) for engine/motor hybrid electric vehicles. The vehicle was modeled on the basis of second-order dynamics, and featured five major segments: a battery, a spark ignition engine, a lithium battery, transmission and vehicle dynamics, and a driver model. To manage the power distribution of dual power sources, the IPSO was equipped with three inputs (rotational speed, battery state-of-charge, and demanded torque) and one output (power split ratio). Five steps were developed for IPSO: (1) initialization; (2) determination of the fitness function; (3) selection and memorization; (4) modification of position and velocity; and (5) a stopping rule. Equivalent fuel consumption by the engine and motor was used as the fitness function with five particles, and the IPSO-based vehicle control unit was completed and integrated with the vehicle simulator. To quantify the energy improvement of IPSO, a four-mode rule-based control (system ready, motor only, engine only, and hybrid modes) was designed according to the engine efficiency and rotational speed. A three-loop Equivalent Consumption Minimization Strategy (ECMS) was coded as the best case. The simulation results revealed that IPSO searches the optimal solution more efficiently than conventional PSO does. In two standard driving cycles, ECE and FTP, the improvements in the equivalent fuel consumption and energy consumption compared to baseline were (24.25%, 45.27%) and (31.85%, 56.41%), respectively, for the IPSO. The CO_2 emission for all five cases (pure engine, rule-based, PSO

Evaluating the Management System Approach for Industrial Energy Efficiency Improvements

Directory of Open Access Journals (Sweden)

Thomas Zobel

2016-09-01

Full Text Available Voluntary environmental management systems (EMS based on the international standard ISO 14001 have become widespread globally in recent years. The purpose of this study is to assess the impact of voluntary management systems on energy efficiency in the Swedish manufacturing industry by means of objective industrial energy data derived from mandatory annual environmental reports. The study focuses on changes in energy efficiency over a period of 12 years and includes both ISO 14001-certified companies and non-certified companies. Consideration is given to energy improvement efforts in the companies before the adoption of ISO 14001. The analysis has been carried out using statistical methods for two different industrial energy parameters: electricity and fossil fuel consumption. The results indicate that ISO 14001 adoption and certification has increased energy efficiency regarding the use of fossil fuel. In contrast, no effect of the management systems has been found concerning the use of electricity. The mixed results of this study are only partly in line with the results of previous studies based on perceptions of company representatives.

The Effects of Domestic Energy Consumption on Urban Development Using System Dynamics

Science.gov (United States)

Saryazdi, M. D.; Homaei, N.; Arjmand, A.

2018-05-01

In developed countries, people have learned to follow efficient consumption patterns, while in developing countries, such as Iran, these patterns are not well executed. A large amount of energy is almost consumed in buildings and houses and though the consumption patterns varies in different societies, various energy policies are required to meet the consumption challenges. So far, several papers and more than ten case studies have worked on the relationship between domestic energy consumption and urban development, however these researches did not analyzed the impact of energy consumption on urban development. Therefore, this paper attempts to examine the interactions between the energy consumption and urban development by using system dynamics as the most widely used methods for complex problems. The proposed approach demonstrates the interactions using causal loop and flow diagrams and finally, suitable strategies will be proposed for urban development through simulations of different scenarios.

Quantification of variables that affect energy consumption

International Nuclear Information System (INIS)

Warren, C.S.

1993-01-01

Facility energy consumption is the summation of a number of contributory factors, caused by equipment that uses energy in response to demands placed by the user and according to its particular design. While energy efficiency improvements usually concentrate on individual parts or systems, overall energy consumption is analyzed by examining the use of specific fuels. Because independent variables effect the consumption of these fuels, accurate comparisons of a facility's energy consumption for time-measured periods must include these effects. In many cases, it is possible to determine and quantify the effects of one or more of the independent variables through a statistically valid regression analysis of the data. The regression model can be linear, or be dependent on other functions such as powers, time lead or lag, or exponential. The most common model is linear, but other dependencies are often encountered. Regression analyses are not difficult to accomplish, and are included as one of the tools in most spreadsheet software. The analyses provide the energy manager with a means to better understand the energy consumption of his/her facility

An Efficient Offloading Scheme For MEC System Considering Delay and Energy Consumption

Science.gov (United States)

Sun, Yanhua; Hao, Zhe; Zhang, Yanhua

2018-01-01

With the increasing numbers of mobile devices, mobile edge computing (MEC) which provides cloud computing capabilities proximate to mobile devices in 5G networks has been envisioned as a promising paradigm to enhance users experience. In this paper, we investigate a joint consideration of delay and energy consumption offloading scheme (JCDE) for MEC system in 5G heterogeneous networks. An optimization is formulated to minimize the delay as well as energy consumption of the offloading system, which the delay and energy consumption of transmitting and calculating tasks are taken into account. We adopt an iterative greedy algorithm to solve the optimization problem. Furthermore, simulations were carried out to validate the utility and effectiveness of our proposed scheme. The effect of parameter variations on the system is analysed as well. Numerical results demonstrate delay and energy efficiency promotion of our proposed scheme compared with another paper’s scheme.

Energy consumption in the management of avocado orchards in Michoacán, Mexico

OpenAIRE

Anaya, Carlos A.; Burgos, Ana Laura

2015-01-01

Efficient fossil energy consumption in agricultural systems is a prerequisite for sustainable agricultural production. Fossil energy consumption (EC) in avocado orchard production in Michoacán, Mexico was analyzed. Process analysis was used to estimate both direct and indirect energy required for the various agricultural operations. Data on fuel and inputs used in production were obtained from structured questionnaires completed by 455 growers. Average annual EC was 28,880 MJ∙ha-1, but the da...

Methodological Approaches to Designing Integrated Systems of Management of Food Service Enterprises

Directory of Open Access Journals (Sweden)

Yatsun Leonid M.

2016-02-01

Full Text Available The article presents materials of studying the processes of designing functions and structures of management of food service enterprises by criteria of composition of the enterprise objectives, their participation in the integration process of production, sales and organization of consumption of food products and services. There have been defined a qualimetric estimation of parameters for enterprises of different size by types of tasks — manufacture of products, marketing activities, customer service, personnel management, etc. Balance schemes of the production and economic system of enterprises regarding cost components and output of food products and services have been developed. The integrated approaches to designing management systems of food service enterprises on the basis of coordination of parameters of the target, linear, functional and resource subsystems have been proposed.

EFFECTIVE MANAGEMENT CONCEPT OF POWER CONSUMPTION OF INDUSTRIAL ENTERPRISE

Directory of Open Access Journals (Sweden)

Vladimir A. Koksharov

2014-01-01

Full Text Available The article distinguishes the methodological and systematic fundamentals for the formation of energy policy of the industrial enterprise. The article performes the analysis of Russian state policy in the field of energy efficiency and conservation , which allows to identify the organizational-economic and regulatory drawbacks proving the existing contradiction between the economic interests of the state and private business in the field of energy efficiency and power supply. Author proposes and formulates the management concept of power consumption of industrial enterprise. The concept includes a number of propositions, the dynamic normal of energy efficiency and energy saving playing the key role. It is regarded as a business model of energy efficiency and energy saving that provides the implementation of both economic and energetic strategies of enterprise.

Analyzing Lifestyle and Consumption Pattern of Hire Groups under Product Service Systems in Taiwan

Directory of Open Access Journals (Sweden)

Jui-Che Tu

2013-01-01

Full Text Available This study explores the characteristics of rental goods, integrates the green concept in the design and development, and introduces the concept of product service into the rental consumption trend in Taiwan. This study takes the questionnaire survey to collect various opinions of the consumers to rental consumption and also classifies the Taiwanese consumers into five clusters based on the life styles, and the names of clusters are simple financial management cluster, environment and taste cluster, fashionable and flexible cluster, careful purchase cluster, and smart consumption cluster. Finally, conclusions are as follows. (1 The green consumption cognition and attitude of the consumers to the environmental goods can help to master the factor of green consumption property for developing the rental commodities. (2 The market segmentation of the rental consumption market can be enhanced by the variables of available life styles. (3 The applications with product service rental characteristics should take the opinion feedback of the consumers into the sustainable product development conditions and expand the service property of the product. (4 As the cost of cradle-to-cradle recycling pattern is high, the support and promotion of the government can help to construct the business model of product service rental consumption and develop the rental economy.

FoodWiki: Ontology-Driven Mobile Safe Food Consumption System

Directory of Open Access Journals (Sweden)

Duygu Çelik

2015-01-01

Full Text Available An ontology-driven safe food consumption mobile system is considered. Over 3,000 compounds are being added to processed food, with numerous effects on the food: to add color, stabilize, texturize, preserve, sweeten, thicken, add flavor, soften, emulsify, and so forth. According to World Health Organization, governments have lately focused on legislation to reduce such ingredients or compounds in manufactured foods as they may have side effects causing health risks such as heart disease, cancer, diabetes, allergens, and obesity. By supervising what and how much to eat as well as what not to eat, we can maximize a patient’s life quality through avoidance of unhealthy ingredients. Smart e-health systems with powerful knowledge bases can provide suggestions of appropriate foods to individuals. Next-generation smart knowledgebase systems will not only include traditional syntactic-based search, which limits the utility of the search results, but will also provide semantics for rich searching. In this paper, performance of concept matching of food ingredients is semantic-based, meaning that it runs its own semantic based rule set to infer meaningful results through the proposed Ontology-Driven Mobile Safe Food Consumption System (FoodWiki.

Sustainable Water Management in Urban, Agricultural, and Natural Systems

Directory of Open Access Journals (Sweden)

Tess Russo

2014-12-01

Full Text Available Sustainable water management (SWM requires allocating between competing water sector demands, and balancing the financial and social resources required to support necessary water systems. The objective of this review is to assess SWM in three sectors: urban, agricultural, and natural systems. This review explores the following questions: (1 How is SWM defined and evaluated? (2 What are the challenges associated with sustainable development in each sector? (3 What are the areas of greatest potential improvement in urban and agricultural water management systems? And (4 What role does country development status have in SWM practices? The methods for evaluating water management practices range from relatively simple indicator methods to integration of multiple models, depending on the complexity of the problem and resources of the investigators. The two key findings and recommendations for meeting SWM objectives are: (1 all forms of water must be considered usable, and reusable, water resources; and (2 increasing agricultural crop water production represents the largest opportunity for reducing total water consumption, and will be required to meet global food security needs. The level of regional development should not dictate sustainability objectives, however local infrastructure conditions and financial capabilities should inform the details of water system design and evaluation.

The Comparison of Virtual Water Consumption among the Various Consumption Patterns of Diet

OpenAIRE

SHANG Hai-yang

2015-01-01

Water resource is the basic and necessary input in the process of production and various consumption patterns of products and goods causes cause different impacts on the water resource using. It is very important to analysis and measures those different influences, which is especially good for the sustainability of water resource, construction of sustainable consumption pattern and the implementation of Integrated Water Resource Management. In this text, the virtual water consumption of Gansu...

A Study of Japanese Consumption Tax System : Mainly on Multiple Tax Rates and Input Tax Credit Methods

OpenAIRE

栗原, 克文

2007-01-01

One of the most important discussions on Japanese tax system reform includes how consumption tax (Value-added tax) system ought to be. Facing issues like depopulation, aging society and large budget deficit, consumption tax can be an effective source of revenue to secure social security. This article mainly focuses on multiple tax rates and input tax credit methods of Japanese consumption tax system. Because of regressive nature of consumption tax, tax rate reduction, exemption on foodstuffs ...

Oxygen Consumption of Tilapia and Preliminary Mass Flows through a Prototype Closed Aquaculture System

Science.gov (United States)

Muller, Matthew S.; Bauer, Clarence F.

1994-01-01

Performance of NASA's prototype CELSS Breadboard Project Closed Aquaculture System was evaluated by estimating gas exchange quantification and preliminary carbon and nitrogen balances. The total system oxygen consumption rate was 535 mg/hr kg/fish (cv = 30%) when stocked with Tilapia aurea populations (fresh weights of 97 +/- 19 to 147 +/- 36 g/fish for various trials). Oxygen consumption by T. aurea (260 mg/hr kg/fish) contributed to approximately one-half of total system demand. Continuous carbon dioxide quantification methods were analyzed using the,relation of carbon dioxide to oxygen consumption. Overall food conversion rates averaged 18.2 +/- 3.2%. Major pathways for nitrogen and carbon in the system were described with preliminary mass closure of 60-80% and 60% for nitrogen and carbon.

Energy consumption quota management of Wanda commercial buildings in China

Science.gov (United States)

Sun, D. B.; Xiao, H.; Wang, X.; Liu, J. J.; Wang, X.; Jin, X. Q.; Wang, J.; Xie, X. K.

2016-08-01

There is limited research of commercial buildings’ energy use data conducted based on practical analysis in China nowadays. Some energy consumption quota tools like Energy Star in U.S or VDI 3807 in Germany have limitation in China's building sector. This study introduces an innovative methodology of applying energy use quota model and empirical management to commercial buildings, which was in accordance of more than one hundred opened shopping centers of a real estate group in China. On the basis of statistical benchmarking, a new concept of “Modified coefficient”, which considers weather, occupancy, business layout, operation schedule and HVAC efficiency, is originally introduced in this paper. Our study shows that the average energy use quota increases from north to south. The average energy use quota of sample buildings is 159 kWh/(m2.a) of severe cold climate zone, 179 kWh/(m2.a) of cold zone, 188 kWh/(m2.a) of hot summer and cold winter zone, and 200 kWh/(m2.a) of hot summer and warm winter zone. The energy use quota model has been validated in the property management for year 2016, providing a new method of commercial building energy management to the industry. As a key result, there is 180 million energy saving potential based on energy quota management in 2016, equals to 6.2% saving rate of actual energy use in 2015.

Management in the system of waste utilization of production and consumption

Science.gov (United States)

Azimov, U. I.; Gilmanshin, I. R.; Krainova, D. R.; Galeev, I. A.

2017-09-01

The main problems of waste management in accordance with the legislation are considered in the article. The economic benefits of separate waste collection are listed. The necessity of transition to a new level of waste management in the Republic of Tatarstan is determined.

Dynamic management of integrated residential energy systems

Science.gov (United States)

Muratori, Matteo

dissertation presents a bottom-up highly resolved model of a generic residential energy eco-system in the United States. The model is able to capture the entire energy footprint of an individual household, to include all appliances, space conditioning systems, in-home charging of plug-in electric vehicles, and any other energy needs, viewing residential and transportation energy needs as an integrated continuum. The residential energy eco-system model is based on a novel bottom-up approach that quantifies consumer energy use behavior. The incorporation of stochastic consumer behaviors allows capturing the electricity consumption of each residential specific end-use, providing an accurate estimation of the actual amount of available controllable resources, and for a better understanding of the potential of residential demand response programs. A dynamic energy management framework is then proposed to manage electricity consumption inside each residential energy eco-system. Objective of the dynamic energy management framework is to optimize the scheduling of all the controllable appliances and in-home charging of plug-in electric vehicles to minimize cost. Such an automated energy management framework is used to simulate residential demand response programs, and evaluate their impact on the electric power infrastructure. For instance, time-varying electricity pricing might lead to synchronization of the individual residential demands, creating pronounced rebound peaks in the aggregate demand that are higher and steeper than the original demand peaks that the time-varying electricity pricing structure intended to eliminate. The modeling tools developed in this study can serve as a virtual laboratory for investigating fundamental economic and policy-related questions regarding the interplay of individual consumers with energy use. The models developed allow for evaluating the impact of different energy policies, technology adoption, and electricity price structures on the total

Energy Management Control Systems: Tools for Energy Savings and Environmental Protection

Science.gov (United States)

Zsebik, Albin; Zala, Laszlo F.

2002-01-01

The change in the price of energy has encouraged the increase of energy efficiency. This report will discuss a tool to promote energy efficiency in intelligent buildings, energy management control systems (EMCS). In addition to the online control of energy production, supply, and consumption, the function of the EMCS is to support short- and long-term planning of the system operation as well as to collect, store, and regularly evaluate operation data. The strategies behind planning and implementing the EMCS as well as the manipulating the resulting data are discussed in this report.

Energy consumption reduction in existing HVAC-R systems via a power law controlling kit

International Nuclear Information System (INIS)

Pinnola, C.F.; Vargas, J.V.C.; Buiar, C.L.; Ordonez, J.C.

2015-01-01

This paper presents an alternative solution for reducing energy consumption in heating, ventilation, air conditioning and refrigeration (HVAC-R) systems. For that, an existing typical commercial refrigeration system was equipped with a novel control system based on a power law, using a frequency inverter and a programmable logic controller (PLC). Hence, it was possible to compare the operation and energy consumption of the system with the power law control and with the on-off system, quantifying the obtained gains. The experimental unit consisted of a cooling chamber, an enclosing chamber (antechamber), and a vapor compression refrigeration system, i.e., an example of a practical commercial cooling system. A set of graphs shows the experimental measurements performed with the two systems. In this way, the measured temperatures in some selected points of the two systems, as well as the consumption in kWh for a period of 6 h and 10 min were compared in the tests. The main conclusions of this work are: i) The system operating with the power law control with respect to the conventional on-off control, showed energy consumption savings of up to 31% in a test period of 6 h and 10 min, and ii) The system compressor cycling frequency in the system operating with the power law control is smaller than with the traditional on-off system. Therefore, the study shows that the developed power law control kit has potential to be installed in any existing system with immediate significant energy savings with no need for HVAC-R hardware changes. - Highlights: • An energy consumption reduction strategy for HVAC-R systems is presented. • Power law and on-off control actions are experimentally compared. • Energy savings of 31% were obtained with power law control. • Compressor cycling frequency is smaller with power law control. • Power law control kit has potential to be installed in any existing system

Low Power Consumption Wireless Sensor Communication System Integrated with an Energy Harvesting Power Source

OpenAIRE

Vlad MARSIC; Alessandro GIULIANO; Meiling ZHU

2013-01-01

This paper presents the testing results of a wireless sensor communication system with low power consumption integrated with an energy harvesting power source. The experiments focus on the system’s capability to perform continuous monitoring and to wirelessly transmit the data acquired from the sensors to a user base station, for realization of completely battery-free wireless sensor system. Energy harvesting technologies together with system design optimization for power consumption minimiza...

Management of air-conditioning systems in residential buildings by using fuzzy logic

Directory of Open Access Journals (Sweden)

Sohair F. Rezeka

2015-06-01

Full Text Available There has been a rising concern in reducing the energy consumption in buildings. Heating, ventilation and air-conditioning system is the biggest consumer of energy in buildings. In this study, management of the air-conditioning system of a building for efficient energy operation and comfortable environment is investigated. The strategy used in this work depends on classifying the rooms to three different groups: very important rooms, important rooms and normal rooms. The total mass flow rate is divided between all rooms by certain percentage using a fuzzy-logic system to get the optimum performance for each room. The suggested Building Management System (BMS was found capable of keeping errors in both temperature and humidity within the acceptable limits at different operating conditions. The BMS can save the chilled/hot water flow rate and the cooling/heating capacity of rooms.

The Energy Management System and Acquisition System Renovation Project Analysis of Communications Company%通信公司能耗管理系统和采集系统改造工程解析

Institute of Scientific and Technical Information of China (English)

邬宏; 耿燕

2014-01-01

能耗的持续增长是当前电信企业面临的重大问题，能耗监测体系和能耗管理系统的不健全，导致电信相关企业对能耗的实际情况不能全面的掌握，以至于节能改造项目的实施也存在诸多问题。根据要求，某通信集团公司将集中建设能耗管理平台，对电能进行集中管理。目前某省通信公司已有的能耗管理平台存在耗电量统计不准确，人性化设计较弱，采集信息显示不完整，无法提供全网能耗分析需求的信息等问题。本系统的改造建设以现有能耗管理平台为基础，通过网管中心虚拟化方式，构建全面的能耗管理平台，对电能实现集中管理，并为之后的节能减排项目提供技术支撑。本文所涉及的实践知识和技术资料可为之后相关领域的能耗管控相关工程提供参考和指导。%The sustained growth of energy consumption is the major issue which the current telecom enterprises are facing. Energy consumption monitoring system and energy management system are not perfect, resulting in that telecom enterprises can not learn the actual situation of the energy consumption, so that the implementation of energy-saving renovation project also has many problems. According to the requirements, the Communications Group Company wil focus on building energy consumption management platform, to realize centralized management of electricity. At present, the current energy consumption management platform of XX Communication Company has the fol owing problems such as counting power consumption inaccurately, weak humanization design, displaying the col ecting information incompletely, unable to provide the information of the whole network energy consumption demand analysis and so on. The renovation construction of this system on the basis of the existing energy consumption management platform, through the network management center virtualization mode, build the comprehensive energy

Critical and precious materials consumption and requirement in wind energy system in the EU 27

International Nuclear Information System (INIS)

Kim, Junbeum; Guillaume, Bertrand; Chung, Jinwook; Hwang, Yongwoo

2015-01-01

Graphical abstract: Critical and precious materials requirement in the wind energy system in the EU 27 by 2020. - Highlights: • The critical and precious materials consumption were calculated in wind energy system in the EU 27. • The future requirement of critical and precious materials was estimated in the EU 27 by 2020. • Fluorspar, silver, magnesium, indium, gold and tantalum are the mainly used and required materials. • This research approach could be applied to other industrial sectors as well as other renewable technology. - Abstract: Critical materials as well as rare earth elements and precious metals such as platinum, gold and silver are used significantly for computer hard disk drives, mobile phones, hybrid electric vehicles, batteries, renewable energy system and many other applications. It is therefore important to quantify and estimate both current stocks and flows of such materials, as well as future requirement for industries and economies. In this study, which is focused on wind energy system in the European Union (EU) 27, the current consumption and future requirement of critical and precious materials were calculated and estimated using the wind power production dataset from ecoinvent and data from National Renewable Energy Action Plan (NREAP). It is shown that fluorspar has been the most consumed material to date, and will probably be the most required material in the future. Among other critical and valuable materials, the main materials used for current wind energy system are silver, magnesium, indium, gold and tantalum. These materials will also be required significantly by 2020 for the wind energy system in the EU 27. It is argued that these results should be connected to the future energy and material policy and management

Implementing a Progressive Consumption Tax: Advantages of Adopting the VAT Credit-Method System

OpenAIRE

Grinberg, Itai

2006-01-01

A credit–method value–added tax, a payroll tax, and a business–level wage subsidy can approximate the economic and distributional consequences of a subtraction–method X–tax. Such a credit–method progressive consumption tax has administrative advantages as compared to a subtraction–method progressive consumption tax, once certain political factors are taken into account. Further, unlike a subtraction–method system, a credit–method progressive consumption tax could easily interact with other ta...

Power Management Optimization of an Experimental Fuel Cell/Battery/Supercapacitor Hybrid System

Directory of Open Access Journals (Sweden)

Farouk Odeim

2015-06-01

Full Text Available In this paper, an experimental fuel cell/battery/supercapacitor hybrid system is investigated in terms of modeling and power management design and optimization. The power management strategy is designed based on the role that should be played by each component of the hybrid power source. The supercapacitor is responsible for the peak power demands. The battery assists the supercapacitor in fulfilling the transient power demand by controlling its state-of-energy, whereas the fuel cell system, with its slow dynamics, controls the state-of-charge of the battery. The parameters of the power management strategy are optimized by a genetic algorithm and Pareto front analysis in a framework of multi-objective optimization, taking into account the hydrogen consumption, the battery loading and the acceleration performance. The optimization results are validated on a test bench composed of a fuel cell system (1.2 kW, 26 V, lithium polymer battery (30 Ah, 37 V, and a supercapacitor (167 F, 48 V.

Resource consumption, sustainability, and cancer.

Science.gov (United States)

Kareva, Irina; Morin, Benjamin; Castillo-Chavez, Carlos

2015-02-01

Preserving a system's viability in the presence of diversity erosion is critical if the goal is to sustainably support biodiversity. Reduction in population heterogeneity, whether inter- or intraspecies, may increase population fragility, either decreasing its ability to adapt effectively to environmental changes or facilitating the survival and success of ordinarily rare phenotypes. The latter may result in over-representation of individuals who may participate in resource utilization patterns that can lead to over-exploitation, exhaustion, and, ultimately, collapse of both the resource and the population that depends on it. Here, we aim to identify regimes that can signal whether a consumer-resource system is capable of supporting viable degrees of heterogeneity. The framework used here is an expansion of a previously introduced consumer-resource type system of a population of individuals classified by their resource consumption. Application of the Reduction Theorem to the system enables us to evaluate the health of the system through tracking both the mean value of the parameter of resource (over)consumption, and the population variance, as both change over time. The article concludes with a discussion that highlights applicability of the proposed system to investigation of systems that are affected by particularly devastating overly adapted populations, namely cancerous cells. Potential intervention approaches for system management are discussed in the context of cancer therapies.

Environmental Management System

Science.gov (United States)

Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management Stewardship » Environmental Protection » Environmental Management System Environmental Management System An Environmental Management System is a systematic method for assessing mission activities, determining the

A Quantitative and Systematic Methodology to Investigate Energy Consumption Issues in Multimodal Intercity Transportation Systems

Directory of Open Access Journals (Sweden)

Lili Du

2015-09-01

Full Text Available Energy issues in transportation systems have garnered increasing attention recently. This study proposes a systematic methodology for policy-makers to minimize energy consumption in multimodal intercity transportation systems considering suppliers’ operational constraints and travelers’ mobility requirements. A bi-level optimization model is developed for this purpose and considers the air, rail, private auto, and transit modes. The upper-level model is a mixed integer nonlinear program aiming to minimize energy consumption subject to transportation suppliers’ operational constraints and traffic demand distribution to paths resulting from the lower-level model. The lower-level model is a linear program seeking to maximize the trip utilities of travelers. The interactions between the multimodal transportation suppliers and intercity traffic demand are considered under the goal of minimizing system energy consumption. The proposed bi-level mixed integer model is relaxed and transformed into a mathematical program with complementarity constraints, and solved using a customized branch-and-bound algorithm. Numerical experiments, conducted using multimodal travel options between Lafayette, Indiana and Washington, D.C. reiterate that shifting traffic demand from private cars to the transit and rail modes significantly reduce energy consumption. Moreover, the proposed methodology provides tools to quantitatively analyze system energy consumption and traffic demand distribution among transportation modes under specific policy instruments. The results illustrate the need to systematically incorporate the interactions among traveler preferences, network structure, and supplier operational schemes to provide policy-makers insights for developing traffic demand shift mechanisms to minimize system energy consumption. Hence, the proposed methodology provide policy-makers the capability to analyze energy consumption in the transportation sector by a

System and method of vehicle operating condition management

Science.gov (United States)

Sujan, Vivek A.; Vajapeyazula, Phani; Follen, Kenneth; Wu, An; Moffett, Barty L.

2015-10-20

A vehicle operating condition profile can be determined over a given route while also considering imposed constraints such as deviation from time targets, deviation from maximum governed speed limits, etc. Given current vehicle speed, engine state and transmission state, the present disclosure optimally manages the engine map and transmission to provide a recommended vehicle operating condition that optimizes fuel consumption in transitioning from one vehicle state to a target state. Exemplary embodiments provide for offline and online optimizations relative to fuel consumption. The benefit is increased freight efficiency in transporting cargo from source to destination by minimizing fuel consumption and maintaining drivability.

Preliminary observations in systemic oxygen consumption during targeted temperature management after cardiac arrest.

Science.gov (United States)

Uber, Amy; Grossestreuer, Anne V; Ross, Catherine E; Patel, Parth V; Trehan, Ambica; Donnino, Michael W; Berg, Katherine M

2018-06-01

Limited data suggests low oxygen consumption (VO 2 ), driven by mitochondrial injury, is associated with mortality after cardiac arrest. Due to the challenges of measurement in the critically ill, post-arrest metabolism remains poorly characterized. We monitored VO 2 , carbon dioxide production (VCO 2 ) and the respiratory quotient (RQ) in post-arrest patients and explored associations with outcome. Using a gas exchange monitor, we measured continuous VO 2 and VCO 2 in post- arrest patients treated with targeted temperature management. We used area under the curve and medians over time to evaluate the association between VO 2 , VCO 2 , RQ and the VO 2 :lactate ratio with survival. In 17 patients, VO 2 in the first 12 h after return of spontaneous circulation (ROSC) was associated with survival (median in survivors 3.35 mL/kg/min [2.98,3.88] vs. non-survivors 2.61 mL/kg/min [2.21,2.94], p = .039). This did not persist over 24 h. The VO 2 :lactate ratio was associated with survival (median in survivors 1.4 [IQR: 1.1,1.7] vs. non-survivors 0.8 [IQR: 0.6,1.2] p  0.7 (p = .131). VCO 2 was not associated with survival. There was a significant association between VO 2 and mortality in the first 12 h after ROSC, but not over 24 h. Lower VO 2: lactate ratio was associated with mortality. A large percentage of patients had RQs below physiologic norms. Further research is needed to explore whether these parameters could have true prognostic value or be a potential treatment target. Copyright © 2018 Elsevier B.V. All rights reserved.

SYSTEM FOR AUTOMATIC SELECTION OF THE SPEED RATE OF ELECTRIC VEHICLES FOR REDUCING THE POWER CONSUMPTION

Directory of Open Access Journals (Sweden)

K. O. Soroka

2017-06-01

Full Text Available Purpose. The work is aimed to design a system for automatic selection of the optimal traffic modes and automatic monitoring of the electric energy consumption by electric transport. This automatic system should provide for the minimum energy expenses. Methodology. Current methodologies: 1 mathematical modeling of traffic modes of ground electric vehicles; 2 comparison of modelling results with the statistical monitoring; 3 system development for automatic choice of traffic modes of electric transport with minimal electrical energy consumptions taking into account the given route schedules and the limitations imposed by the general traffic rules. Findings. The authors obtained a mathematical dependency of the energy consumption by electric transport enterprises on the monthly averaged environment temperature was obtained. A system which allows for an automatic selection of the speed limit and provides automatic monitoring of the electrical energy consumption by electric vehicles was proposed in the form of local network, which works together with existing GPS system. Originality. A mathematical model for calculating the motion curves and energy consumption of electric vehicles has been developed. This model takes into account the characteristic values of the motor engine and the steering system, the change of the mass when loading or unloading passengers, the slopes and radii of the roads, the limitations given by the general traffic rules, and other factors. The dependency of the energy consumption on the averaged monthly environment temperature for public electric transport companies has been calculated. Practical value. The developed mathematical model simplifies the calculations of the traffic dynamics and energy consumption. It can be used for calculating the routing maps, for design and upgrade of the power networks, for development of the electricity saving measures. The system simplifies the work of the vehicle driver and allows reducing

Analysis of energy consumption in lowland rice-based cropping system of Malaysia

Directory of Open Access Journals (Sweden)

Chan Chee Wan

2005-07-01

Full Text Available Sufficient energy is needed in the right form and at the right time for adequate crop production. One way to optimize energy consumption in agriculture is to determine the efficiency of methods and techniques used. With the current increase in world population, energy consumption needs effective planning. That is, the input elements need to be identified in order to prescribe the most efficient methods for controlling them. This study was undertaken in order to determine the direct and indirect energy consumption of field operations in a lowland rice production system of Malaysia. Field time, fuel and other energy requirements were measured for the tillage, planting, fertilizing, spraying and harvesting operations performed. Energy analysis carried out revealed the highest average operational energy consumption was for tillage (1747.33 MJ ha-1 which accounted for about 48.6% of the total operational energy consumption (3595.87 MJ ha-1, followed by harvesting (1171.44 MJ ha-1, 32.6% and planting (562.91 MJ ha-1, 15.7%. Fertilizing and pesticide spraying did not make any significant contributions to the operational energy consumption. Based on energy sources, fuel was the main consumer of direct energy with 2717.82 MJha-1 (22.2%, and fertilizer recording the highest indirect energy consumption of 7721.03 MJha-1 (63.2%. Human labour, pesticides, seeds and indirect energy for machinery use had marginal importance, contributing only 0.2%, 0.6%, 6.8% and 6.9%, respectively to the total energy consumption (12225.97 MJha-1. Average grain yield was 6470.8 kg ha-1, representing energy output of 108321.75 MJha-1, that is, 96095.78 MJ net energy gain or 8.86 MJ output per MJ input. Energy input per kilogram grain yield was 1.89 MJkg-1. The results of the study indicate energy gain in the lowland rice production system of Malaysia.

Consumptive water use to feed humanity - curing a blind spot

Directory of Open Access Journals (Sweden)

M. Falkenmark

2005-01-01

Full Text Available Since in large parts of the world it is getting difficult to meet growing water demands by mobilising more water, the discourse has turned its focus to demand management, governance and the necessary concern for aquatic ecosystems by reserving an 'environmental flow' in the river. The latter calls for attention to river depletion which may be expected in response to changes in consumptive water use by both natural and anthropogenic systems. Basically, consumptive use has three faces: runoff generation influenced by land cover changes; consumptive use of water withdrawn; and evaporation from water systems (reservoirs, canals, river based cooling. After demonstrating the vulnerability to changes in consumptive use under savanna region conditions - representative of many poverty and hunger prone developing countries subject to attention in the Millennium Development Goal activities - the paper exemplifies; 1 changes in runoff generation in response to regional scale land cover changes; 2 consumptive use in large scale irrigation systems. It goes on to analyse the implications of seeing food as a human right by estimating the additional consumptive use requirements to produce food for the next two generations. Attention is paid to remaining degrees of freedom in terms of uncommitted water beyond an environmental flow reserve and to potential food trade consequences (so-called virtual water. The paper concludes that a human-right-to-food principle will have major consequences in terms of altered consumptive water use. It will therefore be essential for humanity to address river depletion to avoid loss of resilience of the life support system. This will demand a deep-going cooperation between hydrology, ecology and water governance.

Maintenance management systems

International Nuclear Information System (INIS)

Rohan, M. de

1989-01-01

This paper is concerned principally with Maintenance Management systems and their effective introduction into organisations. Maintenance improvement is basically a problem of managing the maintenance department in the broadest sense. Improvement does not only lie in the area of special techniques, systems or procedures; although they are valuable tools, but rather in a balanced attack, carefully guided by management. Over recent years, maintenance systems have received the major emphasis and in many instances the selection of the system has become a pre-occupation, whereas the importance of each maintenance function must be recognised and good management practices applied to all maintenance activities. The ingredients for success in the implementation of maintenance management systems are summarised as: having a management committee, clear objectives, project approach using project management techniques and an enthusiastic leader, user managed and data processing supported project, realistic budget and an understanding of the financial audit requirements. (author)

Content Consumption and Hierarchical Structures of Web-Supported Courses

Science.gov (United States)

Hershkovitz, Arnon; Hardof-Jaffe, Sharon; Nachmias, Rafi

2014-01-01

This study presents an empirical investigation of the relationship between the hierarchical structure of content delivered to students within a Learning Management System (LMS) and its actual consumption. To this end, campus-wide data relating to 1,203 courses were collected from the LMS' servers and were subsequently analyzed using data mining…

Bridge Management Systems

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way....

An Energy Management System of a Fuel Cell/Battery Hybrid Boat

Directory of Open Access Journals (Sweden)

Jingang Han

2014-04-01

Full Text Available All-electric ships are now a standard offering for energy/propulsion systems in boats. In this context, integrating fuel cells (FCs as power sources in hybrid energy systems can be an interesting solution because of their high efficiency and low emission. The energy management strategy for different power sources has a great influence on the fuel consumption, dynamic performance and service life of these power sources. This paper presents a hybrid FC/battery power system for a low power boat. The hybrid system consists of the association of a proton exchange membrane fuel cell (PEMFC and battery bank. The mathematical models for the components of the hybrid system are presented. These models are implemented in Matlab/Simulink environment. Simulations allow analyzing the dynamic performance and power allocation according to a typical driving cycle. In this system, an efficient energy management system (EMS based on operation states is proposed. This EMS strategy determines the operating point of each component of the system in order to maximize the system efficiency. Simulation results validate the adequacy of the hybrid power system and the proposed EMS for real ship driving cycles.

Maintenance and management system

International Nuclear Information System (INIS)

Ando, Yasumasa.

1992-01-01

Since highly reliable operation is required in a nuclear power plant, monitoring during operation and periodical inspection are conducted carefully. The present invention provides maintenance and management systems for providing an aid so that these systems are combined effectively and operated rationally based on unified information management. That is, the system contains data bases comprising information for the design of the equipments and pipelines of a plant, information for the exchange of equipment parts, information for the history of plant operation, information for the monitoring and inspection, and information for the management of repair operation. In addition, it has an equipment part history management sub-system for managing equipment part exchange information, an operation history management sub-system for managing the operation state of the plant, an operation history management sub-system for managing equipment monitoring inspection data and operation management sub-system for managing periodical inspection/ repairing operation. These sub-systems are collectively combined to manage the maintenance and management jobs of the plant unitarily. (I.S.)

Systems evolution of waste and by-product management and bioenergy production

Energy Technology Data Exchange (ETDEWEB)

Okkonen, L.

2009-07-01

Evolutionary economic geography provides an inspiring extension to geographical systems analysis. The objective of this dissertation is to apply the systems approach and theory as an integrative framework of sustainable development, and as a capable analytical tool in the analysis of evolutionary resource management and energy production systems in their geographical contexts. The systems investigated are waste and by-product management and bioenergy production systems located in Finland and Scotland. Industrial ecosystem (IE) indicators are constructed for the analysis of waste and by-product management. They present both direct and indirect environmental, economic and social impacts of local waste management operations. The indicators are further applied in scenarios that dynamise the evolution of systems material and energy flows towards the balanced environmental, economic and social development, i.e. the vision of the industrial ecology. The results indicate that the energy use of waste derived fuels in regional cooperation has much potential in the development towards the optimal roundput model of industrial ecosystem. The business opportunities based on local woodfuels are investigated in the context of Scottish forestry policy. The evolution of institutional environments and arrangements of forest management in the Scottish Highlands enables a new type of rural entrepreneurship. The case study of Finnish heat entrepreneurship constructs a heat energy business model, including both the business architecture for product/service flows and the earning logics. Finally, a synthesis of the evolution of natural resource management systems is presented. The evolution process has many geographical contingent conditions, such as resources, technologies, institutions and organisations. Together with general socio-economic mechanisms, they affect the actors in spatial economic processes and interactions. Realisations of the system evolution are structures of economies

Sustainable Consumption

DEFF Research Database (Denmark)

Røpke, Inge

2015-01-01

The intention of this chapter is to explore the role of consumption and consumers in relation to sustainability transition processes and wider systemic transformations. In contrast to the individualistic focus in much research on sustainable consumption, the embeddedness of consumption activities...... in wider social, economic and technological frameworks is emphasised. In particular, the chapter is inspired by practice theory and transition theory. First, various trends in consumption are outlined to highlight some of the challenges for sustainability transitions. Then, it is discussed how consumption...... patterns are shaped over time and what should be considered in sustainability strategies. While discussions on consumption often take their point of departure in the perspective of the individual and then zoom to the wider context, the present approach is the opposite. The outline starts with the basic...

Modeling Aggregate Hourly Energy Consumption in a Regional Building Stock

Directory of Open Access Journals (Sweden)

Anna Kipping

2017-12-01

Full Text Available Sound estimates of future heat and electricity demand with high temporal and spatial resolution are needed for energy system planning, grid design, and evaluating demand-side management options and polices on regional and national levels. In this study, smart meter data on electricity consumption in buildings are combined with cross-sectional building information to model hourly electricity consumption within the household and service sectors on a regional basis in Norway. The same modeling approach is applied to model aggregate hourly district heat consumption in three different consumer groups located in Oslo. A comparison of modeled and metered hourly energy consumption shows that hourly variations and aggregate consumption per county and year are reproduced well by the models. However, for some smaller regions, modeled annual electricity consumption is over- or underestimated by more than 20%. Our results indicate that the presented method is useful for modeling the current and future hourly energy consumption of a regional building stock, but that larger and more detailed training datasets are required to improve the models, and more detailed building stock statistics on regional level are needed to generate useful estimates on aggregate regional energy consumption.

FEMAN: Fuzzy-Based Energy Management System for Green Houses Using Hybrid Grid Solar Power

Directory of Open Access Journals (Sweden)

Abdellah Chehri

2013-01-01

Full Text Available The United Nations has designated the year 2012 as the international year of sustainable energy. Today, we are seeing a rise in global awareness of energy consumption and environmental problems. Many nations have launched different programs to reduce the energy consumption in residential and commercial buildings to seek lower-carbon energy solutions. We are talking about the future green and smart houses. The subject of smart/green houses is not one of “why,” but rather “how,” specifically: “how making the future house more energy efficient.” The use of the renewable energy, the technology and the services could help us to answer this question. Intelligent home energy management is an approach to build centralized systems that deliver application functionality as services to end-consumer applications. The objective of this work is to develop a smart and robust controller for house energy consumption with maximizing the use of solar energy and reducing the impact on the power grid while satisfying the energy demand of house appliances. We proposed a fuzzy-based energy management controller in order to reduce the consumed energy of the building while respecting a fixed comfort.

OWL Ontologies and SWRL Rules Applied to Energy Management

DEFF Research Database (Denmark)

Rossello Busquet, Ana; Brewka, Lukasz Jerzy; Soler, José

2011-01-01

Energy consumption has increased considerably in the last years. How to reduce and make energy consumption more efficient in home environments has become of great interest for researchers. This could be achieved by introducing a Home Energy Management System (HEMS) into user residences. This system...... might allow the user to control the devices in the home network through an interface and apply energy management strategies to reduce and optimize their consumption. Furthermore, the number of devices and appliances found in users residences is increasing and these devices are usually manufactured...

Potential energy consumption reduction of automotive climate control systems

International Nuclear Information System (INIS)

Nielsen, Filip; Uddheim, Åsa; Dalenbäck, Jan-Olof

2016-01-01

Highlights: • Twenty-on energy saving measures for vehicle interior climate were evaluated. • Few single energy saving measures could reduce the energy use significantly. • The operation of the system in intermediate conditions determines the energy use. • Required heating/cooling of passenger compartment had small effect on energy use. - Abstract: In recent years fuel consumption of passenger vehicles has received increased attention by customers, the automotive industry, regulatory agencies and academia. One area which affect the fuel consumption is climate control systems. Twenty-one energy saving measures were evaluated regarding the total energy use for vehicle interior climate using simulation. Evaluated properties were heat flow into the passenger compartment, electrical and mechanical work. The simulation model included sub models of the passenger compartment, air-handling unit, Air Conditioning (AC) system, engine and engine cooling system. A real-world representative test cycle, which included tests in cold, intermediate and warm conditions, was used for evaluation. In general, few single energy saving measures could reduce the energy use significantly. The measures with most potential were increased blower efficiency with a reduction of 46% of the electrical work and increased AC-system disengage temperature with a reduction of 27% of the mechanical work. These results show that the operation of the climate control system had a large effect on the energy use, especially compared to the required heating and cooling of the passenger compartment. As a result energy saving measures need to address how heating and cooling is generated before reducing the heat flow into the passenger compartment.

Guide to energy management

International Nuclear Information System (INIS)

2006-03-01

A systematic and practical guide to energy management. Energy management signifies here a methodology concerning how an organisation continuously can work on improving all aspects of energy efficiency and energy consumption. Focus is on how energy management can be implemented in the companies already existing environment management systems. Useful recommendations and examples are provided (ml)

On-line identification of vehicle fuel consumption for energy and emission management: an LTP System Analysis

NARCIS (Netherlands)

Kessels, J.T.B.A.; Sijs, J.; Hermans, R.M.; Damen, A.A.H.; Bosch, P.P.J. van den; Papp, Z.; Lazar, M.

2008-01-01

Abstract—An Energy Management (EM) system traditionally relies on (quasi) static maps offering efficiency parameters of the vehicle powertrain. During a vehicle’s life span, these maps lose validity, so optimal performance for EM is not assured. This paper presents a proof-of-concept for a novel

On-line identification of vehicle fuel consumption for energy and emission management : an LTP system analysis

NARCIS (Netherlands)

Kessels, J.T.B.A.; Sijs, J.; Hermans, R.M.; Damen, A.A.H.; Bosch, van den P.P.J.

2009-01-01

An Energy Management (EM) system traditionally relies on (quasi) static maps offering efficiency parameters of the vehicle powertrain. During a vehicle's life span, these maps lose validity, so optimal performance for EM is not assured. This paper presents a proof-of-concept for a novel measurement

Evaluation of environmental burdens caused by changes of food waste management systems in Seoul, Korea

International Nuclear Information System (INIS)

Lee, Suk-Hui; Choi, Ki-In; Osako, Masahiro; Dong, Jong-In

2007-01-01

During the last decade, there have been remarkable changes in food waste management in Korea following a ban on direct landfilling. To evaluate the environmental impacts of food waste management systems, we examined individual treatment systems with the LCA approach - landfill, incineration, composting, and feed manufacturing - and estimated the change from 1997 to 2005. The efficient system was different in each impact category, but it was evaluated that landfill is the main contributor to human toxicity and global warming (based on fossil CO 2 ). In contrast, due to the increase of food waste recycling, acidification, eutrophication, and fresh water aquatic ecotoxicity impact was increased. Especially, the high energy consumption and generated residue in recycling systems caused the large burdens in toxicity categories

Small supermarket management system

Institute of Scientific and Technical Information of China (English)

曹正

2016-01-01

This system USES the Java language in the MyEclipse platform development tool, SQL2005 as the database platform for data and data, the SQL2005 required for the user operating system. It mainly implements the daily management of goods, including purchase management, inventory management, sales management, personnel management and supplier management. The system can also complete the functions of browsing, querying, adding, deleting and modifying relevant information. This topic is the core of the stock management, inventory management and sales management, at the same time, the system also has the full user management and permissions management function..

The influence of external subsidies on diet, growth and Hg concentrations of freshwater sport fish: implications for management and fish consumption advisories

Science.gov (United States)

Lepak, J.M.; Hooten, M.B.; Johnson, B.M.

2012-01-01

Mercury (Hg) contamination in sport fish is a global problem. In freshwater systems, food web structure, sport fish sex, size, diet and growth rates influence Hg bioaccumulation. Fish stocking is a common management practice worldwide that can introduce external energy and contaminants into freshwater systems. Thus, stocking can alter many of the factors that influence Hg concentrations in sport fish. Here we evaluated the influence of external subsidies, in the form of hatchery-raised rainbow trout Oncorhynchus mykiss on walleye Sander vitreus diet, growth and Hg concentrations in two freshwater systems. Stocking differentially influenced male and female walleye diets and growth, producing a counterintuitive size-contamination relationship. Modeling indicated that walleye growth rate and diet were important explanatory variables when predicting Hg concentrations. Thus, hatchery contributions to freshwater systems in the form of energy and contaminants can influence diet, growth and Hg concentrations in sport fish. Given the extensive scale of fish stocking, and the known health risks associated with Hg contamination, this represents a significant issue for managers monitoring and manipulating freshwater food web structures, and policy makers attempting to develop fish consumption advisories to protect human health in stocked systems.

Intelligent demand side management of residential building energy systems

Science.gov (United States)

Sinha, Maruti N.

Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

A system model for assessing vehicle use-phase water consumption in urban mobility networks

International Nuclear Information System (INIS)

Yen, Jeff; Bras, Bert

2012-01-01

Water consumption is emerging as an important issue potentially influencing the composition of future urban transportation networks, especially as projected urban populations are expected to outpace water availability and as alternative fuels and vehicles are being implemented in such regions. National and State policies aimed at reducing dependence on imported fuels and energy can increase local production of fuels and energy, impacting demand on local water resources. This article details the development of a model-based assessment on water consumption and withdrawal pertaining to the use-phase of conventional and alternative transportation modes based on regional energy and fuel production. An extensive literature review details water consumption from fuel extraction, processing, and distribution as well as power plant operations. Using Model-Based Systems Engineering principles and the Systems Modeling Language, a multi-level, multi-modal framework was developed and applied to the Metro Atlanta transportation system consisting of conventional and alternative vehicles across varying conditions. According to the analysis, vehicles powered by locally produced biofuels and electricity (assuming average local grid mix for charging) consume more water than locally refined gasoline and CNG-powered vehicles. Improvements in power plant technologies, electricity generation (e.g., use of solar and wind versus hydro power) and vehicle efficiencies can reduce such water consumption significantly. Total water withdrawal for each vehicle and fuel is significantly greater than water consumption. - Highlights: ► A model was made to assess the local water consumption due to conventional and alternatively powered vehicles in a city. ► Water consumed in the local and external production of various fuels was reviewed and included. ► Basic battery electric and biofuel powered vehicles consume on average more water than conventional gasoline and Compressed Natural Gas (CNG

Energy Efficient Refrigeration and Flexible Power Consumption in a Smart Grid

DEFF Research Database (Denmark)

Hovgaard, Tobias Gybel; Halvgaard, Rasmus; Larsen, Lars F.S.

2011-01-01

. With modern Economic Model Predictive Control (MPC) methods we make use of weather forecasts and predictions of varying electricity prices to apply more load to the system when the thermodynamic cycle is most efficient, and to consume larger shares of the electricity when the demand and thereby the prices...... are low. The ability to adjust power consumption according to the demands on the power grid is a highly wanted feature in a future Smart Grid. Efficient utilization of greater amounts of renewable energy calls for solutions to control the power consumption such that it increases when an energy surplus...... is available and decreases when there is a shortage. This should happen almost instantly to accommodate intermittent energy sources as e.g. wind turbines. We expect our power management solution to render systems with thermal storage capabilities suitable for flexible power consumption. The aggregation...

Primary energy consumption of the dwelling with solar hot water system and biomass boiler

International Nuclear Information System (INIS)

Berković-Šubić, Mihaela; Rauch, Martina; Dović, Damir; Andrassy, Mladen

2014-01-01

Highlights: • Methodology for determing delivered and primary energy is developed. • Conventional and solar hot water system are analyzed. • Influence of system components, heat losses and energy consumption is explored. • Savings when using solar system in delivered energy is 30% and in primary 75%. • Dwelling with higher Q H,nd has 60% shorter payback period. - Abstract: This paper presents a new methodology, based on the energy performance of buildings Directive related European norms. It is developed to overcome ambiguities and incompleteness of these standards in determining the delivered and primary energy. The available procedures from the present “Algorithm for determining the energy demands and efficiency of technical systems in buildings”, normally used for energy performance certification of buildings, also allow detailed analyzes of the influence of particular system components on the overall system energy efficiency. The calculation example is given for a Croatian reference dwelling, equipped with a solar hot water system, backed up with a biomass boiler for space heating and domestic hot water purposes as a part of the dwelling energy performance certification. Calculations were performed for two cases corresponding to different levels of the dwelling thermal insulation with an appropriate heating system capacity, in order to investigate the influence of the building heat losses on the system design and energy consumption. The results are compared against those obtained for the conventional system with a gas boiler in terms of the primary energy consumption as well as of investment and operating costs. These results indicate great reduction in both delivered and primary energy consumption when a solar system with biomass boiler is used instead of the conventional one. Higher savings are obtained in the case of the dwelling with higher energy need for space heating. Such dwellings also have a shorter payback period than the ones with

Optimization of self-consumption and techno-economic analysis of PV-battery systems in commercial applications

International Nuclear Information System (INIS)

Merei, Ghada; Moshövel, Janina; Magnor, Dirk; Sauer, Dirk Uwe

2016-01-01

Highlights: • Optimization of self-consumption and the degree of self-sufficiency in commercial applications. • Technical and economic analyses for a PV-battery system. • Sensitivity analysis considering different sizes and prices of PV and battery systems. • Investigation of batteries to increase self-consumption today is not economic in the considered applications. - Abstract: Increasing costs of electricity supply from the local grid, the decreasing photovoltaic (PV) technology costs and the decreasing PV feed-in-tariff according to the current German Renewable Energy Sources Act (EEG) will in the future raise the monetary incentives to increase the self-consumption of PV energy. This is of great interest in commercial buildings as there mostly is sufficient place to install high capacities of photovoltaic panels on their own roofs. Furthermore, the electricity purchase price from the local grid for commercial consumers nowadays is about 20 €ct/kW h, which is higher than the cost of generation of electricity from solar panels (about 8–12 €ct/kW h). Additionally, the load profiles in commercial applications have a high correlation with the generated solar energy. Hence, there is a great opportunity for economic savings. This paper presents optimization results with respect to self-consumption and degree of self-sufficiency for a supermarket in Aachen, Germany. The optimization is achieved using real measurement data of load profile and solar radiation. Besides, techno-economic analyses and sensitivity analyses have been carried out to demonstrate the influence of different PV system sizes, PV system costs and interest rates. Moreover, to raise self-consumption different battery sizes with different battery system costs have been investigated and analysed for 2015 and 2025 scenarios as well. The results show that the installation of a PV system can reduce the electricity costs through self-consumption of self-generated PV energy. Also, applying

Data-Centric Situational Awareness and Management in Intelligent Power Systems

Science.gov (United States)

Dai, Xiaoxiao

The rapid development of technology and society has made the current power system a much more complicated system than ever. The request for big data based situation awareness and management becomes urgent today. In this dissertation, to respond to the grand challenge, two data-centric power system situation awareness and management approaches are proposed to address the security problems in the transmission/distribution grids and social benefits augmentation problem at the distribution-customer lever, respectively. To address the security problem in the transmission/distribution grids utilizing big data, the first approach provides a fault analysis solution based on characterization and analytics of the synchrophasor measurements. Specically, the optimal synchrophasor measurement devices selection algorithm (OSMDSA) and matching pursuit decomposition (MPD) based spatial-temporal synchrophasor data characterization method was developed to reduce data volume while preserving comprehensive information for the big data analyses. And the weighted Granger causality (WGC) method was investigated to conduct fault impact causal analysis during system disturbance for fault localization. Numerical results and comparison with other methods demonstrate the effectiveness and robustness of this analytic approach. As more social effects are becoming important considerations in power system management, the goal of situation awareness should be expanded to also include achievements in social benefits. The second approach investigates the concept and application of social energy upon the University of Denver campus grid to provide management improvement solutions for optimizing social cost. Social element--human working productivity cost, and economic element--electricity consumption cost, are both considered in the evaluation of overall social cost. Moreover, power system simulation, numerical experiments for smart building modeling, distribution level real-time pricing and social

Analysing the dynamics of transitions in residential water consumption in the Netherlands

NARCIS (Netherlands)

Agudelo-Vera, C.M.; Blokker, E.J.M.; Buscher, C.H.; Vreeburg, J.H.G.

2014-01-01

Water infrastructure is inherently a socio-technical system. Rapidly changing urban trends and long-term uncertainties make water infrastructure management complex. This paper analyses the dynamics of residential water consumption in the Netherlands since 1900. During this period, different drivers

[The design of a cardiac monitoring and analysing system with low power consumption].

Science.gov (United States)

Chen, Zhen-cheng; Ni, Li-li; Zhu, Yan-gao; Wang, Hong-yan; Ma, Yan

2002-07-01

The paper deals with a portable analyzing monitor system with liquid crystal display (LCD), which is low in power consumption and suitable for China's specific conditions. Apart from the development of the overall scheme of the system, the paper introduces the design of the hardware and the software. The 80196 single chip microcomputer is used as the central microprocessor to process and real-time electrocardiac signal data. The system have the following functions: five types of arrhythmia analysis, alarm, freeze, and record of automatic paperfeeding. The portable system can be operated by alternate-current (AC) or direct-current (DC). Its hardware circuit is simplified and its software structure is optimized. Multiple low power consumption and LCD unit are adopted in its modular designs.

Methodological Aspects of On-Farm Monitoring of Cropping Systems Management

Directory of Open Access Journals (Sweden)

Luca Bechini

Full Text Available To conduct agro-environmental assessments at field and farm scale, detailed management data of crop and animal production systems are needed. However, this type of data is only rarely collected by public administrations. In the period 2005-2006, we made an experience of on-farm monitoring of cropping systems management, within a larger project aimed at assessing sustainability of agricultural systems in Italian Parks. In this paper, we describe and discuss the steps taken to carry out periodic face-to-face interviews in farms in the Sud Milano Agricultural Park (northern Italy. The first step was the selection of seven farms, which we identified by applying cluster analysis at a large database describing 733 farms of the Park. After having identified the most relevant agro-environmental issues in the studied area, we established a list of simple but sound indicators to evaluate the effects of agricultural management on the environment. The criteria used to select the indicators were that they should: be calculated on easily available data, not be based on direct measurements, make a synthesis of different aspects of reality, and be easily calculated and understood. The indicators selected evaluate nutrient management, fossil energy use, pesticide toxicity, soil management, and economic performance. Subsequently, we designed a data model to store input data used to calculate the indicators (farm configuration, flows of materials and money through the farm gate, animals and their rations, history of crop cultivation, crop management. The data model that we obtained is relatively complex, but adequate to store and analyse the large amount of data acquired during the two-year project. A questionnaire was developed to fully comply with the indicators selected and the data model. The questionnaire was used to carry out approximately six interviews per farm each year, with an investment of time of 1-2 hours per interview. Appropriate double checks of

Pau: the building technical management system plays transparency downstream; Pau: la GTB joue la transparence au fil de l'eau

Energy Technology Data Exchange (ETDEWEB)

Anon.

2000-10-01

All made of glazing, the new department hotel of Pyrenees-Atlantiques (France) combines a technical management system for the optimization of ambience conditioning and an original concept of heat and coldness production. An abandoned river channel and heat pumps are used for the production of hot and cold water. The energy management system allows to optimize both the energy consumption and the comfort of occupants. Technical details are given. (J.S.)

Conference on new consumption and commercialization models for photovoltaic energy

International Nuclear Information System (INIS)

Freier, Karin; Fontaine, Pierre; Mayer, Joerg; Jimenez, Julien; Richard, Pascal; Vogtmann, Michael; Schaefer, Felix; Martin, Nicolas; Buis, Sabine

2014-01-01

The French-German office for Renewable energies (OFAEnR) organised a conference on new consumption and commercialization models for photovoltaic energy. In the framework of this French-German exchange of experience, about 120 participants exchanged views on the new economic models for solar energy producers while the photovoltaic industry has to face a progressive reduction of feed-in tariffs and of other incentive mechanisms. Beside the legal and economic aspects, technical questions around energy storage and integration of photovoltaic production to the grid were also addressed. This document brings together the available presentations (slides) made during this event: 1 - Stimulating self-consumption and direct selling within the EEG (Karin Freier); 2 - Development of PV self-consumption in France (Pierre Fontaine); 3 - experience from applying the new support program for solar energy storage systems (Joerg Mayer); 4 - Call for solar photovoltaic projects for own consumption in Aquitaine region (Julien Jimenez); 5 - SMA Flexible Storage System - New version of the Sunny Island inverter for smart photovoltaic energy storage (Pascal Richard); 6 - PV Own Consumption in industry and commerce - examples und Operating Concepts (Michael Vogtmann); 7 - Supplying tenants in multiple-family housing with solar power in the 'Neue Heimat' project (Felix Schaefer); 8 - How to manage PV-storage self-consumption from a grid point of view? (Nicolas Martin); 9 - Closing talk (Sabine Buis)

Weed Control in Maize-Cowpea Intercropping System Related to Environmental Resources Consumption

Directory of Open Access Journals (Sweden)

Hamdollah ESKANDARI

2011-03-01

Full Text Available A field experiment was carried out in Ramhormoz, Iran during the 2008-2009 growing season to investigate the effects of different planting pattern of intercropping on environmental resource consumption and weed biomass. A randomized complete block design (RCBD with three replications was employed to compare the treatments. Treatments included maize sole crop (M, cow pea sole crop (C, within row intercropping (I1, row intercropping (I2 and mix cropping (I3. The density of intercropping was according to replacement design (one maize replaced by three cow pea plants. The results showed that environmental resource consumption was significantly (P?0.05 affected by cropping system, where PAR interception, moisture and nutrients uptake were higher in intercropping systems compared to sole crop systems. Regarding to weed control, intercrops were more effective than sole crops and it was related to lower availability of environmental resources for weeds in intercropping systems.

Probabilistic analysis of fuel consumption in the hydrothermal system with marginal fixation of tariffs

International Nuclear Information System (INIS)

Alarcon A, I.; Olmedo H, J.C.

1989-01-01

A simulation model, that determining the distribution function of the coal consumption from Chile Thermal Stations was developed, consisting in a tool for taking of a decision of coal purchase from Chilectra Generation Stations. It was applied for analysing the probable coal consumption for the year of 1990. A sensitivity analysis over the main variables, that reflecting in these consumption was also included. This model only makes a monthly energy balance, therefore to achieve a best fuel consumption estimation, it should be included, in the second development stage, a energy balance for the peak hours of the system. (C.G.C.). 2 refs, 4 figs, 5 tabs

New Management Tools – From Video Management Systems to Business Decision Systems

Directory of Open Access Journals (Sweden)

Emilian Cristian IRIMESCU

2015-06-01

Full Text Available In the last decades management was characterized by the increased use of Business Decision Systems, also called Decision Support Systems. More than that, systems that were until now used in a traditional way, for some simple activities (like security, migrated to the decision area of management. Some examples are the Video Management Systems from the physical security activity. This article will underline the way Video Management Systems passed to Business Decision Systems, which are the advantages of use thereof and which are the trends in this industry. The article will also analyze if at this moment Video Management Systems are real Business Decision Systems or if there are some functions missing to rank them at this level.

Optimization of Reliability and Power Consumption in Systems on a Chip

OpenAIRE

Simunic, Tajana; Mihic, Kresimir; De Micheli, Giovanni

2005-01-01

Aggressive transistor scaling, decreased voltage margins and increased processor power and temperature, have made reliability assessment a much more significant issue in design. Although reliability of devices and interconnect has been broadly studied, here we characterize reliability at the system level. Thus we consider component-based System on Chip designs. Reliability is strongly affected by system temperature, which is in turn driven by power consumption. Thus, component reliability and...

Impacts of wireless charging lanes on travel time and energy consumption in a two-lane road system

Science.gov (United States)

He, Jia; Yang, Hai; Huang, Hai-Jun; Tang, Tie-Qiao

2018-06-01

In this paper, we propose a method to compare different energy consumption models and design a strategy to study the quantitative effects of wireless charging lane (WCL) on each electric vehicle's (EV's) link travel time. We utilize the modified energy consumption model and strategy to explore electric vehicle's electricity consumption and link travel time in a two-lane system with a WCL. The numerical results show that EVs' charging behavior on WCL will cause the drivers to execute the lane-changing maneuvers frequently and that the WCL has prominent impacts on EV's energy consumption and travel time, i.e., the capacity drops by 8%-17% while the EV's energy consumption increases by 3%-14% in the two-lane road system.

Sustainable Development of Regional Power Systems and the Consumption of Electric Energy

Directory of Open Access Journals (Sweden)

Evgeny Lisin

2018-04-01

Full Text Available Nowadays, one of the most imminent problems facing power systems in post-industrial countries is the sustainable development of power systems under conditions of increasing power consumption irregularity due to the reduction of the industry’s share in consumers’ demand for electric power. In today’s Russia, this issue is becoming very acute due to the significant share of electric power and heat co-generation that is demonstrating low manoeuvrability and poor adaptation to operations in the daily variation of electric power demand. This paper considers the problem of improving the power system steady-state through the optimization of the production structure of thermal power plants. We propose a combinatorial algorithm that improves the planning of the structural and technological modernization of the power equipment configuration, with a glance at the forecast of the increasing irregularity of power consumption.

Tackling risky alcohol consumption in sport: a cluster randomised controlled trial of an alcohol management intervention with community football clubs.

Science.gov (United States)

Kingsland, Melanie; Wolfenden, Luke; Tindall, Jennifer; Rowland, Bosco C; Lecathelinais, Christophe; Gillham, Karen E; Dodds, Pennie; Sidey, Maree N; Rogerson, John C; McElduff, Patrick; Crundall, Ian; Wiggers, John H

2015-10-01

An increased prevalence of risky alcohol consumption and alcohol-related harm has been reported for members of sporting groups and at sporting venues compared with non-sporting populations. While sports clubs and venues represent opportune settings to implement strategies to reduce such risks, no controlled trials have been reported. The purpose of the study was to examine the effectiveness of an alcohol management intervention in reducing risky alcohol consumption and the risk of alcohol-related harm among community football club members. A cluster randomised controlled trial of an alcohol management intervention was undertaken with non-elite, community football clubs and their members in New South Wales, Australia. Risky alcohol consumption (5+ drinks) at the club and risk of alcohol-related harm using the Alcohol Use Disorders Identification Test (AUDIT) were measured at baseline and postintervention. Eighty-eight clubs participated in the trial (n=43, INTERVENTION; n=45, CONTROL) and separate cross-sectional samples of club members completed the baseline (N=1411) and postintervention (N=1143) surveys. Postintervention, a significantly lower proportion of intervention club members reported: risky alcohol consumption at the club ( 19%; 24%; OR: 0.63 (95% CI 0.40 to 1.00); p=0.05); risk of alcohol-related harm ( 38%; 45%; OR: 0.58 (95% CI 0.38 to 0.87); psports officiating, enhancing club-based alcohol management interventions could make a substantial contribution to reducing the burden of alcohol misuse in communities. ACTRN12609000224224. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

ENERGY MANAGEMENT SYSTEMS AND ISO 50001 ACCREDITATION IN SHIPPING

Directory of Open Access Journals (Sweden)

BRANISLAV DRAGOVIŠ

2017-12-01

Full Text Available The shipping sector is facing new challenges in energy consumption and management. In a recent study conducted by the European Sea Ports Organization (ESPO has shown that energy consumption has risen from 7th place in 2009, to 2nd in 2016, as far as the 10 environmental priorities of European ports. Energy management is seen as the greatest risk for shipping companies, due to the variability existing in the oil and gas markets, in recent decades. Unsuccessful energy management strategies have been shown to have serious consequences for the natural environment, as well as for the companies themselves, which include the enhancement of global warming, and the destruction of a positive corporate image/reputation. Due to this, shipping companies now consider energy as an integral part of their overall strategy and adopt risk management assessments in order to attain the best returns on their investments. The ISO 50001 standard provides a useful tool to companies that are eager to develop and apply an efficient energy strategy consistent with modern Social Corporate Responsibility requirements and aspirations.

Influence of platform screen doors on energy consumption of the environment control system of a mass rapid transit system: case study of the Taipei MRT system

Energy Technology Data Exchange (ETDEWEB)

Hu, S.-C. E-mail: f10870@ntut.edu.tw; Lee, J.-H

2004-03-01

This investigation studies how platform screen doors (PSD) affect the energy consumption of the environmental control system of a mass rapid transit (MRT) system in Taipei. The environmental parameter simulation was conducted using the subway environmental simulation (SES) program, while the associated air conditioning (A/C) cooling load was predicted with the carrier E20-II program. Results show that PSD can significantly decrease average and peak cooling load, thus reducing the capacity/size of cooling equipment and allowing the chiller cooling load to be abridged. However, electricity consumption by ventilation equipment increases notably when PSD are used, particularly the electricity consumption by the under platform exhaust (UPE) fan, and thus, ultimately, little difference exists in the overall energy consumption with and without UPE.

Influence of platform screen doors on energy consumption of the environment control system of a mass rapid transit system: case study of the Taipei MRT system

International Nuclear Information System (INIS)

Hu, S.-C.; Lee, J.-H.

2004-01-01

This investigation studies how platform screen doors (PSD) affect the energy consumption of the environmental control system of a mass rapid transit (MRT) system in Taipei. The environmental parameter simulation was conducted using the subway environmental simulation (SES) program, while the associated air conditioning (A/C) cooling load was predicted with the carrier E20-II program. Results show that PSD can significantly decrease average and peak cooling load, thus reducing the capacity/size of cooling equipment and allowing the chiller cooling load to be abridged. However, electricity consumption by ventilation equipment increases notably when PSD are used, particularly the electricity consumption by the under platform exhaust (UPE) fan, and thus, ultimately, little difference exists in the overall energy consumption with and without UPE

Operations management system

Science.gov (United States)

Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

1990-01-01

The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

Load Balancing Integrated Least Slack Time-Based Appliance Scheduling for Smart Home Energy Management.

Science.gov (United States)

Silva, Bhagya Nathali; Khan, Murad; Han, Kijun

2018-02-25

The emergence of smart devices and smart appliances has highly favored the realization of the smart home concept. Modern smart home systems handle a wide range of user requirements. Energy management and energy conservation are in the spotlight when deploying sophisticated smart homes. However, the performance of energy management systems is highly influenced by user behaviors and adopted energy management approaches. Appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption. Hence, we propose a smart home energy management system that reduces unnecessary energy consumption by integrating an automated switching off system with load balancing and appliance scheduling algorithm. The load balancing scheme acts according to defined constraints such that the cumulative energy consumption of the household is managed below the defined maximum threshold. The scheduling of appliances adheres to the least slack time (LST) algorithm while considering user comfort during scheduling. The performance of the proposed scheme has been evaluated against an existing energy management scheme through computer simulation. The simulation results have revealed a significant improvement gained through the proposed LST-based energy management scheme in terms of cost of energy, along with reduced domestic energy consumption facilitated by an automated switching off mechanism.

Load Balancing Integrated Least Slack Time-Based Appliance Scheduling for Smart Home Energy Management

Science.gov (United States)

Silva, Bhagya Nathali; Khan, Murad; Han, Kijun

2018-01-01

The emergence of smart devices and smart appliances has highly favored the realization of the smart home concept. Modern smart home systems handle a wide range of user requirements. Energy management and energy conservation are in the spotlight when deploying sophisticated smart homes. However, the performance of energy management systems is highly influenced by user behaviors and adopted energy management approaches. Appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption. Hence, we propose a smart home energy management system that reduces unnecessary energy consumption by integrating an automated switching off system with load balancing and appliance scheduling algorithm. The load balancing scheme acts according to defined constraints such that the cumulative energy consumption of the household is managed below the defined maximum threshold. The scheduling of appliances adheres to the least slack time (LST) algorithm while considering user comfort during scheduling. The performance of the proposed scheme has been evaluated against an existing energy management scheme through computer simulation. The simulation results have revealed a significant improvement gained through the proposed LST-based energy management scheme in terms of cost of energy, along with reduced domestic energy consumption facilitated by an automated switching off mechanism. PMID:29495346

Load Balancing Integrated Least Slack Time-Based Appliance Scheduling for Smart Home Energy Management

Directory of Open Access Journals (Sweden)

Bhagya Nathali Silva

2018-02-01

Full Text Available The emergence of smart devices and smart appliances has highly favored the realization of the smart home concept. Modern smart home systems handle a wide range of user requirements. Energy management and energy conservation are in the spotlight when deploying sophisticated smart homes. However, the performance of energy management systems is highly influenced by user behaviors and adopted energy management approaches. Appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption. Hence, we propose a smart home energy management system that reduces unnecessary energy consumption by integrating an automated switching off system with load balancing and appliance scheduling algorithm. The load balancing scheme acts according to defined constraints such that the cumulative energy consumption of the household is managed below the defined maximum threshold. The scheduling of appliances adheres to the least slack time (LST algorithm while considering user comfort during scheduling. The performance of the proposed scheme has been evaluated against an existing energy management scheme through computer simulation. The simulation results have revealed a significant improvement gained through the proposed LST-based energy management scheme in terms of cost of energy, along with reduced domestic energy consumption facilitated by an automated switching off mechanism.

Energy-aware Thread and Data Management in Heterogeneous Multi-core, Multi-memory Systems

Energy Technology Data Exchange (ETDEWEB)

Su, Chun-Yi [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

2014-12-16

By 2004, microprocessor design focused on multicore scaling—increasing the number of cores per die in each generation—as the primary strategy for improving performance. These multicore processors typically equip multiple memory subsystems to improve data throughput. In addition, these systems employ heterogeneous processors such as GPUs and heterogeneous memories like non-volatile memory to improve performance, capacity, and energy efficiency. With the increasing volume of hardware resources and system complexity caused by heterogeneity, future systems will require intelligent ways to manage hardware resources. Early research to improve performance and energy efficiency on heterogeneous, multi-core, multi-memory systems focused on tuning a single primitive or at best a few primitives in the systems. The key limitation of past efforts is their lack of a holistic approach to resource management that balances the tradeoff between performance and energy consumption. In addition, the shift from simple, homogeneous systems to these heterogeneous, multicore, multi-memory systems requires in-depth understanding of efficient resource management for scalable execution, including new models that capture the interchange between performance and energy, smarter resource management strategies, and novel low-level performance/energy tuning primitives and runtime systems. Tuning an application to control available resources efficiently has become a daunting challenge; managing resources in automation is still a dark art since the tradeoffs among programming, energy, and performance remain insufficiently understood. In this dissertation, I have developed theories, models, and resource management techniques to enable energy-efficient execution of parallel applications through thread and data management in these heterogeneous multi-core, multi-memory systems. I study the effect of dynamic concurrent throttling on the performance and energy of multi-core, non-uniform memory access

Comparing the Life Cycle Energy Consumption, Global ...

Science.gov (United States)

Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG) emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energyand carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage) centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability

Disentangling practices, carriers and production-consumption systems: a mixed-method study of (sustainable) food consumption

OpenAIRE

Backhaus, Julia; Wieser, Harald; Kemp, René; Huddart Kennedy, Emily; Cohen, Maurie J.; Krogman, Naomi T.

2015-01-01

With a focus on food consumption practices, this chapter provides conceptual contributions and methodological reflections. The central question is how far practice-based approaches help understanding human behavior, both conceptually and analytically. Food consumption is tied to family traditions, individual taste, nutritional needs, and preferences. At the same time, its provision, obtainment, preparation, and consumption have economic, political, social, and cultural significance. The empir...

Cross-jurisdictional management of a trophy-hunted species.

Science.gov (United States)

Hochard, Jacob; Finnoff, David

2017-05-07

Gray wolves (Canis lupus) are managed for competing uses in the Greater Yellowstone Ecosystem (GYE). Tourism benefits Yellowstone National Park (YNP) visitors while trophy hunting benefits hunters outside of the park. We investigate the policy scope of gray wolf management across jurisdictional boundaries by incorporating three foundations of the behavioral ecology of wolves: refuge-seeking behavior, optimal foraging group size and territoriality. Tradeoffs between and within consumptive and non-consumptive human benefits and wolf population fitness and life history indicators are quantified as a set of elasticities, providing clear implications to resource managers. Our approach highlights that hunting intensity affects the provision of consumptive and non-consumptive human benefits across jurisdictional boundaries and ought to be managed accordingly. We also show that population levels are an incomplete indicator of species fitness, which may depend on how hunting policies impact underlying group ecology. Our findings suggest traditional optimization approaches to wildlife management may lead to suboptimal policy recommendations when the boundaries on the natural system are oversimplified. Highlighting the human element of wildlife management, we show that understanding tourist and hunter responses to wildlife population abundances is critical to balancing provision of consumptive and non-consumptive human uses. Copyright © 2017 Elsevier Ltd. All rights reserved.

Research of Consumption of Biodiesel in Different Working Operations in the System of Precision Agriculture

Directory of Open Access Journals (Sweden)

Marek Angelovič

2012-05-01

Full Text Available The aim of study was to research the consumption of biodiesel in various working operations of the tractor John Deere 8230 with trailer and plow under field conditions. Biodiesel was made from agricultural crop of oilseed rape according to etherification. Experimental measurements were made on land of the Slovak University of Agriculture, in Kolíňany, Slovakia. The metering device was used EDMeco recorder and an electronic flow meter of the actual consumption of biodiesel. The measuring system was installed in the fuel system John Deere tractor, the 8230. On the base of the obtained results we can conclude that at the transportation of the tractor with trailer Mega 20 was the average hourly consumption of 15.43 liters of biodiesel. At the plowing with set of tractor and rotating 7-mouldboard plow Ostroj Opava, the average hourly consumption was of 33.93 liters of biodiesel.

Systems Engineering Management Plan

International Nuclear Information System (INIS)

1994-01-01

The purpose of this Monitored Retrievable Storage (MRS) Project Systems Engineering Management Plan (SEMP) is to define and establish the MRS Project Systems Engineering process that implements the approved policy and requirements of the Office of Civilian Radioactive Waste Management (OCRWM) for the US Department of Energy (DOE). This plan is Volume 5 of the MRS Project Management Plan (PMP). This plan provides the framework for implementation of systems engineering on the MRS Project consistent with DOE Order 4700.1, the OCRWM Program Management System Manual (PMSM), and the OCRWM Systems Engineering Management Plan (SEMP)

Energy consumption and energy-saving potential analysis of pollutant abatement systems in a 1000MW coal-fired power plant.

Science.gov (United States)

Yang, Hang; Zhang, Yongxin; Zheng, Chenghang; Wu, Xuecheng; Chen, Linghong; Gao, Xiang; Fu, Joshua S

2018-05-10

The pollutant abatement systems are widely applied in the coal-fired power sector and the energy consumption was considered an important part of the auxiliary power. An energy consumption analysis and assessment model of pollutant abatement systems in a power unit was developed based on the dynamic parameters and technology. The energy consumption of pollutant abatement systems in a 1000 MW coal-fired power unit which meet the ultra-low emission limits and the factors of operating parameters including unit load and inlet concentration of pollutants on the operating power were analyzed. The results show that the total power consumption of the pollutant abatement systems accounted for 1.27% of the gross power generation during the monitoring period. The WFGD system consumed 67% of the rate while the SCR and ESP systems consumed 8.9% and 24.1%. The power consumption rate of pollutant abatement systems decreased with the increase of unit load and increased with the increase of the inlet concentration of pollutants. The operation adjustment was also an effective method to increase the energy efficiency. For example, the operation adjustment of slurry circulation pumps could promote the energy-saving operation of WFGD system. Implication Statement The application of pollutant abatement technologies increases the internal energy consumption of the power plant, which will lead to an increase of power generation costs. The real-time energy consumption of the different pollutant abatement systems in a typical power unit is analyzed based on the dynamic operating data. Further, the influence of different operating parameters on the operating power of the system and the possible energy-saving potential are analyzed.

PARADOX OF ALTERNATIVE ENERGY CONSUMPTION: LEAN OR PROFLIGACY?

Directory of Open Access Journals (Sweden)

Eliza Safina

2017-12-01

Full Text Available Consumption of alternative energy resources is conventionally considered as an implement of lean management, main target of which is use of renewable (in terms of exhaustibility energy resources. However, when it comes to actual consumption of alternative energy resources, the contradiction is arisen between , the caused need of economy of non-renewable energy resources and rational environmental management and "providence" which is caused by cost reduction of energy consumption. What is the factual providence, how substantial is the dilemma between environmental friendliness and cost effectiveness in matters of energy savings, what is the significance of alternative energy consumption in countries with different economic types, what should balanced solution in energy mentioned issues are contemplated in current article.

Predator-scent stress, ethanol consumption and the opioid system in an animal model of PTSD.

Science.gov (United States)

Manjoch, Hadar; Vainer, Ella; Matar, Michael; Ifergane, Gal; Zohar, Joseph; Kaplan, Zeev; Cohen, Hagit

2016-06-01

Emerging literature points to stress exposure as a potential contributor to the development of alcohol abuse, but animal models have yielded inconsistent results. Converging experimental data indicate that the endogenous opioid system modulates alcohol consumption and stress regulation. The aim of the present study is to examine the interplay between stress exposure, behavioral stress responses, ethanol (EtOH) consumption and the endogenous opioid system in an animal model of posttraumatic stress disorder. Rats were exposed to stress and then tested in a two-bottle free choice (TBC) assay or in a conditioned place preference paradigm. In some experiments, the endogenous opioid system was pharmacologically manipulated prior to stress exposure. The behavioral outcomes of stress exposure were assessed in an elevated plus-maze, with the acoustic startle response, and by monitoring the freezing response to trauma reminder. Immunoreactivity of phosphorylated opioid receptors in hippocampal subregions was also measured. Stress significantly increased the consumption of EtOH in the TBC assay. The severity of the behavioral response to stress was associated with EtOH consumption, cue-triggered freezing response to a trauma reminder, and endogenous levels of phosphorylated opioid receptors in the hippocampus. Pharmacologically manipulating the endogenous opioid system prior to stress exposure attenuated trauma cue-triggered freezing responses and blocked predator scent stress-induced potentiation of EtOH consumption. These data demonstrate a stress-induced potentiation of EtOH self-administration and reveal a clear association between individual patterns of the behavioral response to stress and alcohol preference, while indicating a role for the endogenous opioid system in the neurobiological response to stress. Copyright © 2016. Published by Elsevier B.V.

Consumption of natural gas on GRTgaz's territory - Year 2007

International Nuclear Information System (INIS)

2008-01-01

GRTgaz is a European leader in natural gas transmission, a world expert in gas transmission networks and systems, and an operator firmly committed to the energy transition. It owns and operates the gas transmission network throughout most of France and it manages the transmission network in Germany, thereby helping to ensure correct operation of the French and European gas market. It contributes to the energy security of regional supply systems and performs a public service mission to ensure the continuity of consumer supply. This document presents some key figures about GRTgaz activity in 2007: Gross consumption on GRTgaz's transmission system and associated, Change in gross and corrected consumptions on the GRTgaz network over the period 2006-2007, Quantities of natural gas transported each month by GRTgaz in 2007

Low Power Consumption Wireless Sensor Communication System Integrated with an Energy Harvesting Power Source

Directory of Open Access Journals (Sweden)

Vlad MARSIC

2013-01-01

Full Text Available This paper presents the testing results of a wireless sensor communication system with low power consumption integrated with an energy harvesting power source. The experiments focus on the system’s capability to perform continuous monitoring and to wirelessly transmit the data acquired from the sensors to a user base station, for realization of completely battery-free wireless sensor system. Energy harvesting technologies together with system design optimization for power consumption minimization ensure the system’s energy autonomous capability demonstrated in this paper by presenting the promising testing results achieved following its integration with structural health monitoring and body area network applications.

Power management implementation in FreeRTOS on LM3S3748

Directory of Open Access Journals (Sweden)

Simonović Mirela

2013-01-01

Full Text Available Power consumption has become a major concern of embedded systems today. With the aim to reduce power consumption during the runtime, operating systems are dealing with power management. In this work, the FreeRTOS port is extended with power management features on LM3S3748 microcontroller. Tickless idle technique is implemented to provide more powersaving during the processor idle periods.

Multi objective optimization of line pack management of gas pipeline system

International Nuclear Information System (INIS)

Chebouba, A

2015-01-01

This paper addresses the Line Pack Management of the ''GZ1 Hassi R'mell-Arzew'' gas pipeline. For a gas pipeline system, the decision-making on the gas line pack management scenarios usually involves a delicate balance between minimization of the fuel consumption in the compression stations and maximizing gas line pack. In order to select an acceptable Line Pack Management of Gas Pipeline scenario from these two angles for ''GZ1 Hassi R'mell- Arzew'' gas pipeline, the idea of multi-objective decision-making has been introduced. The first step in developing this approach is the derivation of a numerical method to analyze the flow through the pipeline under transient isothermal conditions. In this paper, the solver NSGA-II of the modeFRONTIER, coupled with a matlab program was used for solving the multi-objective problem

Reduction of Fuel Consumption and Exhaust Pollutant Using Intelligent Transport Systems

Directory of Open Access Journals (Sweden)

Mostofa Kamal Nasir

2014-01-01

Full Text Available Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO, hydrocarbons (HC, carbon dioxide (CO2, particulate matter (PM, and oxides of nitrogen (NOx. Intelligent transport system (ITS technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment.

Reduction of Fuel Consumption and Exhaust Pollutant Using Intelligent Transport Systems

Science.gov (United States)

Nasir, Mostofa Kamal; Md Noor, Rafidah; Kalam, M. A.; Masum, B. M.

2014-01-01

Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2), particulate matter (PM), and oxides of nitrogen (NOx). Intelligent transport system (ITS) technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment. PMID:25032239

Reduction of fuel consumption and exhaust pollutant using intelligent transport systems.

Science.gov (United States)

Nasir, Mostofa Kamal; Md Noor, Rafidah; Kalam, M A; Masum, B M

2014-01-01

Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2), particulate matter (PM), and oxides of nitrogen (NO x ). Intelligent transport system (ITS) technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment.

Reducing Electrical Consumption in the Forest Products Industry Using Lean Thinking

Directory of Open Access Journals (Sweden)

Scott William Lyon

2014-01-01

Full Text Available The forest products industry has an opportunity to reduce energy costs using energy management practices, thereby boosting its global competitiveness. Increasing manufacturing costs have contributed significantly to the decline of the forest products manufacturing industries in the U.S.; these increasing costs limit manufacturers’ abilities to compete with their global competitors. U.S. companies are continually improving their products, processes, finances, and business practices to better compete with global marketplaces; however, they may not be seizing all of the opportunities available through more efficient energy consumption practices. By eliminating non-valued added activities, lean thinking is an example of one tool that may improve performance and reduce costs. A case study was conducted at a cabinet manufacturer in Virginia to examine the impact of lean thinking on the consumption of electricity in the manufacturing process. An energy management system was used to provide rapid feedback on electrical energy consumption for production operations. Significant changes were observed after implementing energy reduction practices identified by lean thinking tools.

A mechanistic model for electricity consumption on dairy farms: definition, validation, and demonstration.

Science.gov (United States)

Upton, J; Murphy, M; Shalloo, L; Groot Koerkamp, P W G; De Boer, I J M

2014-01-01

Our objective was to define and demonstrate a mechanistic model that enables dairy farmers to explore the impact of a technical or managerial innovation on electricity consumption, associated CO2 emissions, and electricity costs. We, therefore, (1) defined a model for electricity consumption on dairy farms (MECD) capable of simulating total electricity consumption along with related CO2 emissions and electricity costs on dairy farms on a monthly basis; (2) validated the MECD using empirical data of 1yr on commercial spring calving, grass-based dairy farms with 45, 88, and 195 milking cows; and (3) demonstrated the functionality of the model by applying 2 electricity tariffs to the electricity consumption data and examining the effect on total dairy farm electricity costs. The MECD was developed using a mechanistic modeling approach and required the key inputs of milk production, cow number, and details relating to the milk-cooling system, milking machine system, water-heating system, lighting systems, water pump systems, and the winter housing facilities as well as details relating to the management of the farm (e.g., season of calving). Model validation showed an overall relative prediction error (RPE) of less than 10% for total electricity consumption. More than 87% of the mean square prediction error of total electricity consumption was accounted for by random variation. The RPE values of the milk-cooling systems, water-heating systems, and milking machine systems were less than 20%. The RPE values for automatic scraper systems, lighting systems, and water pump systems varied from 18 to 113%, indicating a poor prediction for these metrics. However, automatic scrapers, lighting, and water pumps made up only 14% of total electricity consumption across all farms, reducing the overall impact of these poor predictions. Demonstration of the model showed that total farm electricity costs increased by between 29 and 38% by moving from a day and night tariff to a flat

Integrating the radioactive waste management system into other management systems

International Nuclear Information System (INIS)

Silva, Ana Cristina Lourenco da; Nunes Neto, Carlos Antonio

2007-01-01

Radioactive waste management is to be included in the Integrated Management System (IMS) which pursues the continuous improvement of the company's quality, occupational safety and health, and environment protection processes. Radioactive waste management is based on the following aspects: optimization of human and material resources for execution of tasks, including the provision of a radiation protection supervisor to watch over the management of radioactive waste; improved documentation (management plan and procedures); optimization of operational levels for waste classification and release; maintenance of generation records and history through a database that facilitates traceability of information; implementation of radioactive waste segregation at source (source identification, monitoring and decontamination) activities intended to reduce the amount of radioactive waste; licensing of initial storage site for radioactive waste control and storage; employee awareness training on radioactive waste generation; identification and evaluation of emergency situations and response planning; implementation of preventive maintenance program for safety related items; development and application of new, advanced treatment methodologies or systems. These aspects are inherent in the concepts underlying quality management (establishment of administrative controls and performance indicators), environment protection (establishment of operational levels and controls for release), occupational health and safety (establishment of operational controls for exposure in emergency and routine situations and compliance with strict legal requirements and standards). It is noted that optimizing the addressed aspects of a radioactive waste management system further enhances the efficiency of the Integrated Management System for Quality, Environment, and Occupational Safety and Health. (author)

Learning Content Management Systems

Directory of Open Access Journals (Sweden)

Tache JURUBESCU

2008-01-01

Full Text Available The paper explains the evolution of e-Learning and related concepts and tools and its connection with other concepts such as Knowledge Management, Human Resources Management, Enterprise Resource Planning, and Information Technology. The paper also distinguished Learning Content Management Systems from Learning Management Systems and Content Management Systems used for general web-based content. The newest Learning Content Management System, very expensive and yet very little implemented is one of the best tools that helps us to cope with the realities of the 21st Century in what learning concerns. The debates over how beneficial one or another system is for an organization, can be driven by costs involved, efficiency envisaged, and availability of the product on the market.

Lighting system with thermal management system

Science.gov (United States)

Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2013-05-07

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Post-Kyoto energy consumption strategies for the Greek interconnected electric system

International Nuclear Information System (INIS)

Dagoumas, A.S.; Panapakidis, I.P.; Papagiannis, G.K.; Dokopoulos, P.S.

2008-01-01

The liberalization of the Greek electric market (Law 2773/99, updated with Laws 3175/2003 and 3426/2005 for incorporating Directive 2003/54 into the Greek legislation) is in its final structural transformation, which includes the fact that from 1.7.2007 each customer can select its electricity provider. This new status together with the procedure towards the formation of a post-Kyoto plan, raise the need of examining different energy saving strategies in the consumption side for evaluating their economic and environmental consequences. Such strategies may be useful for the decision makers or the electricity retail companies. This paper examines the influence of several post-Kyoto electricity consumption strategies in the Greek interconnected electric system for the period 2005-2025. The aim of the paper is to be used as a decision makers' tool for investigating the potential of electricity consumption policies. The results show that policies related either to seasonal peak demand control, or targeting at the total electric consumption lead to significant gains and emission reduction. Moreover the influence of factors, such as the weather conditions, the discount rate of the energy investments, the fuel prices evolution and the consumers' behavior linkage with oil prices are examined

Integrated Management of Residential Energy Resources

Directory of Open Access Journals (Sweden)

Antunes C. H.

2012-10-01

Full Text Available The increasing deployment of distributed generation systems based on renewables in the residential sector, the development of information and communication technologies and the expected evolution of traditional power systems towards smart grids are inducing changes in the passive role of end-users, namely with stimuli to change residential demand patterns. The residential user should be able to make decisions and efficiently manage his energy resources by taking advantages from his flexibility in load usage with the aim to minimize the electricity bill without depreciating the quality of energy services provided. The aim of this paper is characterizing electricity consumption in the residential sector and categorizing the different loads according to their typical usage, working cycles, technical constraints and possible degree of control. This categorization of end-use loads contributes to ascertain the availability of controllable loads to be managed as well as the different direct management actions that can be implemented. The ability to implement different management actions over diverse end-use load will increase the responsiveness of demand and potentially raises the willingness of end-users to accept such activities. The impacts on the aggregated national demand of large-scale dissemination of management systems that would help the end-user to make decisions regarding electricity consumption are predicted using a simulator that generates the aggregated residential sector electricity consumption under variable prices.

Managing hybrid marketing systems.

Science.gov (United States)

Moriarty, R T; Moran, U

1990-01-01

As competition increases and costs become critical, companies that once went to market only one way are adding new channels and using new methods - creating hybrid marketing systems. These hybrid marketing systems hold the promise of greater coverage and reduced costs. But they are also hard to manage; they inevitably raise questions of conflict and control: conflict because marketing units compete for customers; control because new indirect channels are less subject to management authority. Hard as they are to manage, however, hybrid marketing systems promise to become the dominant design, replacing the "purebred" channel strategy in all kinds of businesses. The trick to managing the hybrid is to analyze tasks and channels within and across a marketing system. A map - the hybrid grid - can help managers make sense of their hybrid system. What the chart reveals is that channels are not the basic building blocks of a marketing system; marketing tasks are. The hybrid grid forces managers to consider various combinations of channels and tasks that will optimize both cost and coverage. Managing conflict is also an important element of a successful hybrid system. Managers should first acknowledge the inevitability of conflict. Then they should move to bound it by creating guidelines that spell out which customers to serve through which methods. Finally, a marketing and sales productivity (MSP) system, consisting of a central marketing database, can act as the central nervous system of a hybrid marketing system, helping managers create customized channels and service for specific customer segments.

Energy and water quality management systems for water utility's operations: a review.

Science.gov (United States)

Cherchi, Carla; Badruzzaman, Mohammad; Oppenheimer, Joan; Bros, Christopher M; Jacangelo, Joseph G

2015-04-15

Holistic management of water and energy resources is critical for water utilities facing increasing energy prices, water supply shortage and stringent regulatory requirements. In the early 1990s, the concept of an integrated Energy and Water Quality Management System (EWQMS) was developed as an operational optimization framework for solving water quality, water supply and energy management problems simultaneously. Approximately twenty water utilities have implemented an EWQMS by interfacing commercial or in-house software optimization programs with existing control systems. For utilities with an installed EWQMS, operating cost savings of 8-15% have been reported due to higher use of cheaper tariff periods and better operating efficiencies, resulting in the reduction in energy consumption of ∼6-9%. This review provides the current state-of-knowledge on EWQMS typical structural features and operational strategies and benefits and drawbacks are analyzed. The review also highlights the challenges encountered during installation and implementation of EWQMS and identifies the knowledge gaps that should motivate new research efforts. Copyright © 2015 Elsevier Ltd. All rights reserved.

Fuel Consumption Management in the Transportation Sector in Iran

DEFF Research Database (Denmark)

Dastjerdi, Aliasghar M.; Araghi, Bahar Namaki

2011-01-01

Energy consumption in the transportation sector in Iran is significantly higher than global norms and standards which caused some issues including wasting national resources, deteriorating air quality, GHG emissions etc. The major purpose of this paper is to introduce practical policies, strategies...... and technologies to reduce liquid fuel consumption known as a dominant source of energy in transport sector in Iran. Since, the road subsector has the major share in consuming liquid fuel amongst others, more attention is given to the methods for reducing consumption in this subsector. The relating policies...... and actions were classified by optimization measures according to four separate categories as follows; “Optimization of Supply of Transportation Services”, “Optimization of Transport Demand”, “Optimization of Energy Consumption” and “Optimization of Car Manufacturing”....

Lepidopteran larva consumption of soybean foliage: basis for developing multiple-species economic thresholds for pest management decisions.

Science.gov (United States)

Bueno, Regiane Cristina Oliveira de Freitas; Bueno, Adeney de Freitas; Moscardi, Flávio; Parra, José Roberto Postali; Hoffmann-Campo, Clara Beatriz

2011-02-01

Defoliation by Anticarsia gemmatalis (Hübner), Pseudoplusia includens (Walker), Spodoptera eridania (Cramer), S. cosmioides (Walker) and S. frugiperda (JE Smith) (Lepidoptera: Noctuidae) was evaluated in four soybean genotypes. A multiple-species economic threshold (ET), based upon the species' feeding capacity, is proposed with the aim of improving growers' management decisions on when to initiate control measures for the species complex. Consumption by A. gemmatalis, S. cosmioides or S. eridania on different genotypes was similar. The highest consumption of P. includens was 92.7 cm(2) on Codetec 219RR; that of S. frugiperda was 118 cm(2) on Codetec 219RR and 115.1 cm(2) on MSoy 8787RR. The insect injury equivalent for S. cosmoides, calculated on the basis of insect consumption, was double the standard consumption by A. gemmatalis, and statistically different from the other species tested, which were similar to each other. As S. cosmioides always defoliated nearly twice the leaf area of the other species, the injury equivalent would be 2 for this lepidopteran species and 1 for the other species. The recommended multiple-species ET to trigger the beginning of insect control would then be 20 insect equivalents per linear metre. Copyright © 2010 Society of Chemical Industry.

Information Security Management - Part Of The Integrated Management System

Science.gov (United States)

Manea, Constantin Adrian

2015-07-01

The international management standards allow their integrated approach, thereby combining aspects of particular importance to the activity of any organization, from the quality management systems or the environmental management of the information security systems or the business continuity management systems. Although there is no national or international regulation, nor a defined standard for the Integrated Management System, the need to implement an integrated system occurs within the organization, which feels the opportunity to integrate the management components into a cohesive system, in agreement with the purpose and mission publicly stated. The issues relating to information security in the organization, from the perspective of the management system, raise serious questions to any organization in the current context of electronic information, reason for which we consider not only appropriate but necessary to promote and implement an Integrated Management System Quality - Environment - Health and Operational Security - Information Security

Operational simulation, design and management of decentralized energy systems; Betriebliche Modellierung, Auslegung und Management von dezentralen Energiesystemen

Energy Technology Data Exchange (ETDEWEB)

Matics, J.

2007-06-28

Chapter 2 describes the worldwide increase of primary energy consumption, which is expected in coming decades and results in possible solutions of a decentralised energy supply that is mainly based upon renewable energy carriers and the use of cogeneration systems. Chapter 3 shows the characteristics of decentralised system components that have been investigated in the frame of this research work as well as the resulting model library to depict the operational performance of the individual components and their mutual influence. A detailed dynamic simulation of a complete fuel cell system based on a steam reformer including the concept of local and superordinate control circuits is presented in chapter 4. Chapter 5 includes the integrated concepts for the intelligent and adaptable management of complex decentralised energy systems as well as a description of their implementation. Apart from the applied metaheuristic optimization methods the adaptable fuzzy-system, used in this case, is presented. The components of the model library of decentralised system components (chapter 3), the dynamic simulation of a complete fuel cell system based on a reformer (chapter 4), as well as the intelligent and adaptable plant management (chapter 5) are used in chapter 6 to investigate the various decentralised energy systems. The investigation focuses in particular on a) the electricity supply of a one-family home based on photovoltaics including different storage technologies and an increasing degree of energetic independence; b) the operational performance of a wind park with 72 individual plants as well as the combination of flywheel mass storage and wind energy plant; c) the control concepts, which have been developed for a fuel cell test stand based on a steam reformer, and their effects on the operation of the individual components as well as their interaction; d) the use of the developed management modules for the flexible and adaptable operation of a cogeneration system for

A Distributed Multi-agent Control System for Power Consumption in Buildings

DEFF Research Database (Denmark)

Kosek, Anna Magdalena; Gehrke, Oliver

2012-01-01

This paper presents a distributed controller for adjusting the electrical consumption of a residential building in response to an external power setpoint in Watts. The controller is based on a multi-agent system and has been implemented in JCSP. It is modularly built, capable of self-configuratio...

Integrated management systems

CERN Document Server

Bugdol, Marek

2015-01-01

Examining the challenges of integrated management, this book explores the importance and potential benefits of using an integrated approach as a cross-functional concept of management. It covers not only standardized management systems (e.g. International Organization for Standardization), but also models of self-assessment, as well as different types of integration. Furthermore, it demonstrates how processes and systems can be integrated, and how management efficiency can be increased. The major part of this book focuses on management concepts which use integration as a key tool of management processes (e.g. the systematic approach, supply chain management, virtual and network organizations, processes management and total quality management). Case studies, illustrations, and tables are also provided to exemplify and illuminate the content, as well as examples of successful and failed integrations. Providing a particularly useful resource to managers and specialists involved in the improvement of organization...

New type radiation management system

International Nuclear Information System (INIS)

Mogi, Kenichi; Uranaka, Yasuo; Fujita, Kazuhiko

2001-01-01

The radiation management system is a system to carry out entrance and leaving room management of peoples into radiation management area, information management on radiation obtained from a radiation testing apparatus, and so on. New type radiation management system developed by the Mitsubishi Electric Corp. is designed by concepts of superior maintenance and system practice by using apparatus and its interface with standard specification, upgrading of processing response by separating exposure management processing from radiation monitoring processing on a computer, and a backup system not so as to lose its function by a single accident of the constructed computer. Therefore, the system is applied by the newest hardware, package software, and general use LAN, and can carry out a total system filled with requirements and functions for various radiation management of customers by preparing a basic system from radiation testing apparatus to entrance and leaving room management system. Here were described on outline of the new type management system, concept of the system, and functions of every testing apparatus. (G.K.)

Systems approaches to integrated solid waste management in developing countries

International Nuclear Information System (INIS)

Marshall, Rachael E.; Farahbakhsh, Khosrow

2013-01-01

Highlights: ► Five drivers led developed countries to current solid waste management paradigm. ► Many unique factors challenge developing country solid waste management. ► Limited transferability of developed country approaches to developing countries. ► High uncertainties and decision stakes call for post-normal approaches. ► Systems thinking needed for multi-scale, self-organizing eco-social waste systems. - Abstract: Solid waste management (SWM) has become an issue of increasing global concern as urban populations continue to rise and consumption patterns change. The health and environmental implications associated with SWM are mounting in urgency, particularly in the context of developing countries. While systems analyses largely targeting well-defined, engineered systems have been used to help SWM agencies in industrialized countries since the 1960s, collection and removal dominate the SWM sector in developing countries. This review contrasts the history and current paradigms of SWM practices and policies in industrialized countries with the current challenges and complexities faced in developing country SWM. In industrialized countries, public health, environment, resource scarcity, climate change, and public awareness and participation have acted as SWM drivers towards the current paradigm of integrated SWM. However, urbanization, inequality, and economic growth; cultural and socio-economic aspects; policy, governance, and institutional issues; and international influences have complicated SWM in developing countries. This has limited the applicability of approaches that were successful along the SWM development trajectories of industrialized countries. This review demonstrates the importance of founding new SWM approaches for developing country contexts in post-normal science and complex, adaptive systems thinking

Systems approaches to integrated solid waste management in developing countries

Energy Technology Data Exchange (ETDEWEB)

Marshall, Rachael E., E-mail: rmarsh01@uoguelph.ca [School of Engineering, University of Guelph, Albert A. Thornbrough Building, Guelph, ON, Canada N1G 2W1 (Canada); Farahbakhsh, Khosrow, E-mail: khosrowf@uoguelph.ca [School of Engineering, University of Guelph, Albert A. Thornbrough Building, Guelph, ON, Canada N1G 2W1 (Canada)

2013-04-15

Highlights: ► Five drivers led developed countries to current solid waste management paradigm. ► Many unique factors challenge developing country solid waste management. ► Limited transferability of developed country approaches to developing countries. ► High uncertainties and decision stakes call for post-normal approaches. ► Systems thinking needed for multi-scale, self-organizing eco-social waste systems. - Abstract: Solid waste management (SWM) has become an issue of increasing global concern as urban populations continue to rise and consumption patterns change. The health and environmental implications associated with SWM are mounting in urgency, particularly in the context of developing countries. While systems analyses largely targeting well-defined, engineered systems have been used to help SWM agencies in industrialized countries since the 1960s, collection and removal dominate the SWM sector in developing countries. This review contrasts the history and current paradigms of SWM practices and policies in industrialized countries with the current challenges and complexities faced in developing country SWM. In industrialized countries, public health, environment, resource scarcity, climate change, and public awareness and participation have acted as SWM drivers towards the current paradigm of integrated SWM. However, urbanization, inequality, and economic growth; cultural and socio-economic aspects; policy, governance, and institutional issues; and international influences have complicated SWM in developing countries. This has limited the applicability of approaches that were successful along the SWM development trajectories of industrialized countries. This review demonstrates the importance of founding new SWM approaches for developing country contexts in post-normal science and complex, adaptive systems thinking.

Comparing patterns of ecosystem service consumption and perceptions of range management between ethnic herders in Inner Mongolia and Mongolia

International Nuclear Information System (INIS)

Zhen, L; Lv, Y; Wei, Y J; Liu, X L; Yao, Z J; Li, F; Ochirbat, B; Chen, J Q

2010-01-01

Ecosystems in the Central Asian Plateau, which includes the Mongolian Plateau, are becoming increasingly sensitive to human interventions, leading to deterioration of already fragile ecosystems. The goal of this paper is to illustrate human dependence on an ecosystem by identifying patterns of resource consumption in this region and investigating the knowledge and perceptions of herders living in these ecosystems. Data on consumption in the two regions were collected using structured questionnaires delivered to a total of 252 herders from Mongolia and China's Inner Mongolia. Meat and other animal products remain the dominant food items for most households, accompanied by various vegetables and cereals. This unbalanced diet leads to excessive consumption of protein and fat from animal sources. The major energy sources used by herders are fuelwood, animal dung, crop residues, and dry grass, but consumption patterns differed between the two areas. Mongolian herders rely more heavily on livestock for meeting their consumption needs than herders in Inner Mongolia. Herder knowledge and perceptions of ecosystem conditions and consumption of resources differed between Mongolia and Inner Mongolia, reflecting the influence of different state policies. The data reported and the conclusions drawn are relevant for developing resource management policies for the Mongolian Plateau, but also provide useful insights for any region where livestock production dominates the use of rangeland resources.

Development of a computer-assisted personal interview software system for collection of tribal fish consumption data.

Science.gov (United States)

Kissinger, Lon; Lorenzana, Roseanne; Mittl, Beth; Lasrado, Merwyn; Iwenofu, Samuel; Olivo, Vanessa; Helba, Cynthia; Capoeman, Pauline; Williams, Ann H

2010-12-01

The authors developed a computer-assisted personal interviewing (CAPI) seafood consumption survey tool from existing Pacific NW Native American seafood consumption survey methodology. The software runs on readily available hardware and software, and is easily configured for different cultures and seafood resources. The CAPI is used with a booklet of harvest location maps and species and portion size images. The use of a CAPI facilitates tribal administration of seafood consumption surveys, allowing cost-effective collection of scientifically defensible data and tribal management of data and data interpretation. Use of tribal interviewers reduces potential bias and discomfort that may be associated with nontribal interviewers. The CAPI contains a 24-hour recall and food frequency questionnaire, and assesses seasonal seafood consumption and temporal changes in consumption. EPA's methodology for developing ambient water quality criteria for tribes assigns a high priority to local data. The CAPI will satisfy this guidance objective. Survey results will support development of tribal water quality standards on their lands and assessment of seafood consumption-related contaminant risks and nutritional benefits. CAPI advantages over paper surveys include complex question branching without raising respondent burden, more complete interviews due to answer error and range checking, data transcription error elimination, printing and mailing cost elimination, and improved data storage. The survey instrument was pilot tested among the Quinault Nation in 2006. © 2010 Society for Risk Analysis.

A system of tradable CO2 permits applied to fuel consumption by motorists

International Nuclear Information System (INIS)

Raux, C.; Marlot, G.

2005-01-01

Decentralized transferable permit systems in the transport sector can be of interest with regard to reducing greenhouse gas emissions, in spite of anticipated transaction costs. This paper describes a potential application of a domestic market for car fuel consumption permits. The marginal costs of consumption reduction vary sufficiently according to motorists' residential locations to consider permit exchanges. Economic evaluation of this system shows that there are transfers of surplus between the various groups of motorists according to their residential locations. The central government may lose significant revenues when compared with a conventional fuel tax. Lastly, the issue of transaction costs, the benefits and disadvantages in terms of social acceptability and equity are discussed. (author)

Energy engenderment: An industrialized perspective assessing the importance of engaging women in residential energy consumption management

International Nuclear Information System (INIS)

Elnakat, Afamia; Gomez, Juan D.

2015-01-01

This study assesses gender role and participation in energy utilization at the residential household level in an advanced industrial country setting. Two hundred and twenty one (221) standardized surveys of single-family residential households in San Antonio, Texas – the seventh largest city in the United States of America – are collected and used as a test case. The objective is to highlight the role of women in improving household energy efficiency. By coupling the behavioral and analytical sciences, studies such as this one provide better insight for the effective deployment of targeted energy efficiency programs that can benefit both households and municipalities while reducing impact on environmental resources. Study conclusions highlight 80% higher per capita consumption in female dominant households versus male dominant households (p=0.000) driven by approximately double the gas consumption in female-headed households (p=0.002), and 54% more electric usage (p=0.004). The higher use in female dominant homes is examined through the socio-demographic impacts of education, income, vintage of home occupied and size of home occupied. The theoretical framework and test case presented in this study promote the need for market segmented energy efficiency initiatives that better engage women in energy demand-side management in industrialized populated cities. -- Highlights: •Role of women in energy consumption is understudied in industrial settings. •There is a significant impact from women on energy consumption in test case. •Higher per capita, per square foot, and gas consumption are indicated for women. •Women’s intrinsic role at household level can allow for better energy efficiency

THE PLACE OF OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM IN THE INTEGRATED MANAGEMENT SYSTEM

Directory of Open Access Journals (Sweden)

Piotr Kafel

2016-06-01

Full Text Available The purpose of this paper is to analyze the place of occupational health and safety management system (OHSMS within the integrated management system. Implementation aspects of management systems are discussed, namely the different management system standards used for registration, for example ISO 14001, ISO 9001, OHSAS 18001, ISO 27001, the order in which they were implemented, the time required for each implementation, as well as the scope of integration of these management system standards into a single Integrated Management System and the level of integration. In order to do so, some of the results of a survey carried out in 81 organizations registered to at least two management systems selected from popular international standards, e.g.: ISO 9001, ISO 14001, OHSAS 18001, ISO/IEC 27001, ISO 22000 were used. OHSMS is not the system that is implemented as a first one. Usually it is implemented after or simultaneously with ISO 9001 and ISO 14001 standards. Time of implementation of MSSs in second and further round of implementation is shorter than during the implementation of first standards. There is a higher level of integration of implemented management standards in organizations where one of the standards in OHSMS, than in a companies without OHSMS. The paper analyses those sequences of management systems implementation of safety management systems with other system, that allow organizations to achieve higher levels of integration and presents a possible pattern for the companies initiating the integration process.

Experiment with flexible electric power consumption; Demonstrationsforsoeg med fleksibelt elforbrug

Energy Technology Data Exchange (ETDEWEB)

Pedersen, Thomas Emil (Dong Energy A/S, Fredericia (Denmark))

2009-09-15

The emergence of interactive meters with communication module has made it possible that electricity consumption at different customer segments can be activated in a new way of benefit for the customer, the electricity company and the system operator. In this demonstration project customer segment is larger commercial properties and public institutions. In conclusion, it is technically possible to manage and activate the potential for demand response within the segment of large office blocks and public buildings. Practical experiments have shown that it is more expensive to achieve flexibility in power consumption for older properties than for a newly built property. The economics of demand response within office buildings are currently (prices as of 2008) not so attractive for either the customer or the utility company in relation to the investments needed to be made at both the customer and the utility company to build an infrastructure. It should also be noted that there may be relatively much work involved in handling a lot of small systems compared to systems of large effects, for example 500 kW and more. It is therefore the more attractive systems within the industrial customer segments with plants as UPS systems, cooling systems in cold storage rooms and the like which has the potential of a size that should be ground-breaking by building an infrastructure to manage power demand response, so that it eventually becomes marginally cheaper also handle minor power effects like those in office buildings. (ln)

Evaluation of energy consumption of treating nitrate-contaminated groundwater by bioelectrochemical systems.

Science.gov (United States)

Cecconet, Daniele; Zou, Shiqiang; Capodaglio, Andrea G; He, Zhen

2018-09-15

Nitrate contamination of groundwater is a mounting concern for drinking water production due to its healthy and ecological effects. Bioelectrochemical systems (BES) are a promising method for energy efficient nitrate removal, but its energy consumption has not been well understood. Herein, we conducted a preliminary analysis of energy consumption based on both literature information and multiple assumptions. Four scenarios were created for the purpose of analysis based on two treatment approaches, microbial fuel cells (MFCs) and controlled biocathodic denitrification (CBD), under either in situ or ex situ deployment. The results show a specific energy consumption based on the mass of NO 3 - -N removed (SEC N ) of 0.341 and 1.602 kWh kg NO 3 - -N -1 obtained from in situ and ex situ treatments with MFCs, respectively; the main contributor was the extraction of the anolyte (100%) in the former and pumping the groundwater (74.8%) for the latter. In the case of CBD treatment, the energy consumption by power supply outcompeted all the other energy items (over 85% in all cases), and a total SEC N of 19.028 and 10.003 kWh kg NO 3 - -N -1 were obtained for in situ and ex situ treatments, respectively. The increase in the water table depth (from 10 to 30 m) and the decrease of the nitrate concentration (from 25 to 15 mg NO 3 - -N) would lead to a rise in energy consumption in the ex situ treatment. Although some data might be premature due to the lack of sufficient information in available literature, the results could provide an initial picture of energy consumption by BES-based groundwater treatment and encourage further thinking and analysis of energy consumption (and production). Copyright © 2018 Elsevier B.V. All rights reserved.

Controlled Ecological Life Support Systems (CELSS) physiochemical waste management systems evaluation

Science.gov (United States)

Oleson, M.; Slavin, T.; Liening, F.; Olson, R. L.

1986-01-01

Parametric data for six waste management subsystems considered for use on the Space Station are compared, i.e.: (1) dry incineration; (2) wet oxidation; (3) supercritical water oxidation; (4) vapor compression distillation; (5) thermoelectric integrated membrane evaporation system; and (6) vapor phase catalytic ammonia removal. The parameters selected for comparison are on-orbit weight and volume, resupply and return to Earth logistics, power consumption, and heat rejection. Trades studies are performed on subsystem parameters derived from the most recent literature. The Boeing Engineering Trade Study (BETS), an environmental control and life support system (ECLSS) trade study computer program developed by Boeing Aerospace Company, is used to properly size the subsystems under study. The six waste treatment subsystems modeled in this program are sized to process the wastes for a 90-day Space Station mission with an 8-person crew, and an emergency supply period of 28 days. The resulting subsystem parameters are compared not only on an individual subsystem level but also as part of an integrated ECLSS.

Energy management information systems : achieving improved energy efficiency : a handbook for managers, engineers and operational staff

Energy Technology Data Exchange (ETDEWEB)

Hooke, J.H.; Landry, B.J.; Hart, D. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Efficiency

2004-07-01

There are many opportunities for industrial and commercial facilities to improve energy efficiency by minimizing waste through process optimization. Large energy users can effectively reduce energy costs, improve profits and reduce greenhouse gas emissions by using computing and control equipment. This book covers all aspects of an Energy Management Information System (EMIS) including metering, data collection, data analysis, reporting and cost benefit analyses. EMIS provides relevant information to businesses that enables them to improve energy performance. EMIS deliverables include early detection of poor performance, support for decision making and effective energy reporting. EMIS also features data storage, calculation of effective targets for energy use and comparative energy consumption. Computer systems can be used to improve business performance in terms of finance, personnel, sales, resource planning, maintenance, process control, design and training. In the 1980s, the Canadian Industry Program for Energy Conservation (CIPEC) developed 2 versions of an energy accounting manual to help industrial, commercial and institutional sectors implement energy-accounting systems. The manual was revised in 1989 and is a useful energy management tool for business and other organizations. The EMIS examples described in this booklet reflect that energy is a variable operating cost, not a fixed overhead charge. 8 tabs., 38 figs.

Analysis and design of a Taguchi-Grey based electricity demand predictor for energy management systems

International Nuclear Information System (INIS)

Yao, Albert W.L.; Chi, S.C.

2004-01-01

In order to use electricity efficiently, a demand control management system is one of the effective ways to reduce energy consumption and electric bills. An electricity demand control system is used as a means to monitor and manage the usage of electricity effectively. Moreover, it is a useful tool for avoiding penalties beyond the contracted demand value of electricity with the electric power company. In this project, we developed a Taguchi-Grey based predictor to forecast the demand value of electricity on line. In a Grey prediction, the parameter settings are highly relevant to the accuracy of forecasting. A Taguchi method was employed to optimize the parameter settings for the Grey based electricity demand value predictor. Our experimental results show that the optimal parameter settings of the Grey prediction are α=0.4, five point modeling and three minute sampling time of the data acquisition system. The improved Taguchi-Grey based electricity demand predictor in conjunction with the PC based electricity demand control system is a cost effective and efficient means to manage the usage of electricity

Disentangling practices, carriers and production-consumption systems : a mixed-method study of (sustainable) food consumption

NARCIS (Netherlands)

Backhaus, Julia; Wieser, Harald; Kemp, René; Huddart Kennedy, Emily; Cohen, Maurie J.; Krogman, Naomi T.

2015-01-01

With a focus on food consumption practices, this chapter provides conceptual contributions and methodological reflections. The central question is how far practice-based approaches help understanding human behavior, both conceptually and analytically. Food consumption is tied to family traditions,

Experimental study of mini SCADA renewable energy management system on microgrid using Raspberry Pi

Science.gov (United States)

Tridianto, E.; Permatasari, P. D.; Ali, I. R.

2018-03-01

Renewable Energy Management System (REMS) is a device that can be able to monitor power through a microgrid. The purpose of this system is to optimize power usage that produced from renewable energy with the result that reduces power demand from the grid. To reach the goal this device manage the load power needs fully supplied by renewable energy when the power produced from renewable energy is higher than load demand, besides power surplus will be stored in battery in this way energy stored in battery can be used when it needed. When the power produced from renewable energy can not satisfy the power demand, power will supply by renewable energy and grid. This device uses power meters for record any power flow through microgrid. In order to manage power flow in microgrid this system use relay module. The user can find out energy consumption (consumed by the load) and production (produced by renewable energy) in a period of time so that the user can switch on the load in right time.

A systems engineering management approach to resource management applications

Science.gov (United States)

Hornstein, Rhoda Shaller

1989-01-01

The author presents a program management response to the following question: How can the traditional practice of systems engineering management, including requirements specification, be adapted, enhanced, or modified to build future planning and scheduling systems for effective operations? The systems engineering management process, as traditionally practiced, is examined. Extensible resource management systems are discussed. It is concluded that extensible systems are a partial solution to problems presented by requirements that are incomplete, partially immeasurable, and often dynamic. There are positive indications that resource management systems have been characterized and modeled sufficiently to allow their implementation as extensible systems.

Building automation: Photovoltaic assisted thermal comfort management system for energy saving

International Nuclear Information System (INIS)

Khan, M Reyasudin Basir; Jidin, Razali; Shaaya, Sharifah Azwa; Pasupuleti, Jagadeesh

2013-01-01

Building automation plays an important key role in the means to reduce building energy consumption and to provide comfort for building occupants. It is often that air conditioning system operating features ignored in building automation which can result in thermal discomfort among building occupants. Most automation system for building is expensive and incurs high maintenance cost. Such system also does not support electricity demand side management system such as load shifting. This paper discusses on centralized monitoring system for room temperature and photovoltaic (PV) output for feasibility study of PV assisted air conditioning system in small office buildings. The architecture of the system consists of PV modules and sensor nodes located at each room. Wireless sensor network technology (WSN) been used for data transmission. The data from temperature sensors and PV modules transmitted to the host personal computer (PC) wirelessly using Zigbee modules. Microcontroller based USB data acquisition device used to receive data from sensor nodes and displays the data on PC.

Building automation: Photovoltaic assisted thermal comfort management system for energy saving

Science.gov (United States)

Reyasudin Basir Khan, M.; Jidin, Razali; Pasupuleti, Jagadeesh; Azwa Shaaya, Sharifah

2013-06-01

Building automation plays an important key role in the means to reduce building energy consumption and to provide comfort for building occupants. It is often that air conditioning system operating features ignored in building automation which can result in thermal discomfort among building occupants. Most automation system for building is expensive and incurs high maintenance cost. Such system also does not support electricity demand side management system such as load shifting. This paper discusses on centralized monitoring system for room temperature and photovoltaic (PV) output for feasibility study of PV assisted air conditioning system in small office buildings. The architecture of the system consists of PV modules and sensor nodes located at each room. Wireless sensor network technology (WSN) been used for data transmission. The data from temperature sensors and PV modules transmitted to the host personal computer (PC) wirelessly using Zigbee modules. Microcontroller based USB data acquisition device used to receive data from sensor nodes and displays the data on PC.

Optimization for a fuel cell/battery/capacity tram with equivalent consumption minimization strategy

International Nuclear Information System (INIS)

Zhang, Wenbin; Li, Jianqiu; Xu, Liangfei; Ouyang, Minggao

2017-01-01

Highlights: • The hybridization of the fuel cell with the energy storage systems is realized for the tram. • A protype tram is tested based on an operation mode switching method. • An equivalent consumption minimization strategy is proposed and verified for optimization. - Abstract: This paper describes a hybrid tram powered by a Proton Exchange Membrane (PEM) fuel cell (FC) stack supported by an energy storage system (ESS) composed of a Li-ion battery (LB) pack and an ultra-capacitor (UC) pack. This configuration allows the tram to operate without grid connection. The hybrid tram with its full load is tested in the CRRC Qingdao Sifang Co.; Ltd. It firstly works on the operation mode switching method (OPMS) without energy regenerative and proper power management. Therefore, an equivalent consumption minimization strategy (ECMS) aimed at minimizing the hydrogen consumption is proposed to improve the characteristics of the tram. The results show that the proposed control system enhances drivability and economy, and is effective for application to this hybrid system.

On the Trade-off between Energy Consumption and Food Quality Loss in Supermarket Refrigeration Systems

DEFF Research Database (Denmark)

Cai, Junping; Jensen, Jørgen Bauck; Skogestad, Sigurd

2008-01-01

This paper studies the trade-off between energy consumption and food quality loss, at varying ambient conditions, in supermarket refrigeration systems. Compared with the traditional operation with pressure control, a large potential for energy savings without extra loss of food quality is demonst......This paper studies the trade-off between energy consumption and food quality loss, at varying ambient conditions, in supermarket refrigeration systems. Compared with the traditional operation with pressure control, a large potential for energy savings without extra loss of food quality...

Monitoring and optimization of energy consumption of base transceiver stations

International Nuclear Information System (INIS)

Spagnuolo, Antonio; Petraglia, Antonio; Vetromile, Carmela; Formosi, Roberto; Lubritto, Carmine

2015-01-01

The growth and development of the mobile phone network has led to an increased demand for energy by the telecommunications sector, with a noticeable impact on the environment. Monitoring of energy consumption is a great tool for understanding how to better manage this consumption and find the best strategy to adopt in order to maximize reduction of unnecessary usage of electricity. This paper reports on a monitoring campaign performed on six BSs (Base Transceiver Stations) located central Italy, with different technology, typology and technical characteristics. The study focuses on monitoring energy consumption and environmental parameters (temperature, noise, and global radiation), linking energy consumption with the load of telephone traffic and with the air conditioning functions used to cool the transmission equipment. Moreover, using experimental data collected, it is shown, with a Monte Carlo simulation based on power saving features, how the BS monitored could save energy. - Highlights: • Energy consumption and environmental parameters of a base transceiver system have been monitored. • Energy consumption is related to the air conditioning functions and to the load of telephone traffic. • Energy saving can be obtained by careful choice of cooling parameters and by turn off BS transceivers. • Energy saving parameters can be estimated by a simulation Monte Carlo method

A system dynamic model for production and consumption policy in Iran oil and gas sector

International Nuclear Information System (INIS)

Kiani, Behdad; Ali Pourfakhraei, Mohammad

2010-01-01

A system dynamic model is presented, which considers the feedback between supply and demand and oil revenue of the existing system in Iran considering different sectors of the economy. Also the export of the oil surplus and the injection of the gas surplus into the oil reservoirs are seen in the model by establishing a balance between supply and demand. In this model the counter-effects and existing system feedbacks between supply and demand and oil revenue can be seen considering different sectors of the economy. As a result, the effects of oil and gas policies in different scenarios for different sectors of Iran's economy together with the counter-effects of energy consumption and oil revenue are examined. Three scenarios, which show the worst, base and ideal cases, are considered to find future trends of major variables such as seasonal gas consumption in power plants, seasonal injected gas in oil reservoirs, economic growth in the industrial sector, oil consumption in the transportation sector, industrial gas consumption and exported gas. For example, it is shown that the exported gas will reach between 500 and 620 million cubic-meter per day in different scenarios and export revenues can reach up to $500 billion by 2025. - Research Highlights: →A system dynamic model analyzing the feedback between supply, demand and oil revenue is built. →The export of the oil surplus and the injection of the gas surplus into oil reservoirs are modeled. →Effects of oil and gas policies in different scenarios are examined for Iran's economy. →Counter-effects of energy consumption and oil revenue are examined. →Exported gas will reach between 500 and 620 million cubic-meter per day in different scenarios. →Export revenues can reach up to $500 billion by 2025.

Computer Profile of School Facilities Energy Consumption.

Science.gov (United States)

Oswalt, Felix E.

This document outlines a computerized management tool designed to enable building managers to identify energy consumption as related to types and uses of school facilities for the purpose of evaluating and managing the operation, maintenance, modification, and planning of new facilities. Specifically, it is expected that the statistics generated…

Ant Colony Optimization Algorithm to Dynamic Energy Management in Cloud Data Center

Directory of Open Access Journals (Sweden)

Shanchen Pang

2017-01-01

Full Text Available With the wide deployment of cloud computing data centers, the problems of power consumption have become increasingly prominent. The dynamic energy management problem in pursuit of energy-efficiency in cloud data centers is investigated. Specifically, a dynamic energy management system model for cloud data centers is built, and this system is composed of DVS Management Module, Load Balancing Module, and Task Scheduling Module. According to Task Scheduling Module, the scheduling process is analyzed by Stochastic Petri Net, and a task-oriented resource allocation method (LET-ACO is proposed, which optimizes the running time of the system and the energy consumption by scheduling tasks. Simulation studies confirm the effectiveness of the proposed system model. And the simulation results also show that, compared to ACO, Min-Min, and RR scheduling strategy, the proposed LET-ACO method can save up to 28%, 31%, and 40% energy consumption while meeting performance constraints.

The Determination of Load Profiles and Power Consumptions of Home Appliances

Directory of Open Access Journals (Sweden)

Fatih Issi

2018-03-01

Full Text Available In recent years, the increment of distributed electricity generation based on renewable energy sources and improvement of communication technologies have caused the development of next-generation power grids known as smart grids. The structures of smart grids have bidirectional communication capability and enable the connection of energy generated from distributed sources to any point on the grid. They also support consumers in energy efficiency by creating opportunities for management of power consumption. The information on power consumption and load profiles of home appliances is essential to perform load management in the dwelling accurately. In this study, the power consumption data for all the basic home appliances, utilized in a two-person family in Çankırı, Turkey, was obtained with high resolution in one-second intervals. The detailed power consumption analysis and load profile were executed for each home appliance. The obtained data is not only the average power consumption of each appliance but also characterizes different operating modes or their cycles. In addition, the impact of these devices on home energy management studies and their standby power consumptions were also discussed. The acquired data is an important source to determine the load profile of individual home appliances precisely in home energy management studies. Although the results of this study do not completely reflect the energy consumption behavior of the people who live in this region, they can reveal the trends in load demands based on a real sample and customer consumption behavior of a typical two-person family.

Incorporating co-management within your environmental management system

International Nuclear Information System (INIS)

Melton, D.A.; Maher, S.

1998-01-01

The meaning of co-management in the renewable resource sector in terms of government and First Nations relations was explained. Co-management is a short term for co-operative management and has a formative history in the Northwest Territories, particularly in wildlife management. For example, co-management bridged the gap between the aboriginal way of hunting with those of the government. The aboriginal system was associated by self regulation based on traditional knowledge whereas the government system emphasized science, laws and regulations. At present, there are few examples of co-management in the oil and gas sector. This paper described the lessons that could be learned from previous examples of co-management and how those lessons might apply to an Environmental Management System (EMS) for the private oil and gas sector. 3 refs

Towards a Cyber Defense Framework for SCADA Systems Based on Power Consumption Monitoring

Energy Technology Data Exchange (ETDEWEB)

Hernandez Jimenez, Jarilyn M [ORNL; Chen, Qian [Savannah State University; Nichols, Jeff A. {Cyber Sciences} [ORNL; Calhoun, Chelsea [Savannah State University; Sykes, Summer [Savannah State University

2017-01-01

Supervisory control and data acquisition (SCADA) is an industrial automation system that remotely monitor, and control critical infrastructures. SCADA systems are major targets for espionage and sabotage attackers. According to the 2015 Dell security annual threat report, the number of cyber-attacks against SCADA systems has doubled in the past year. Cyber-attacks (i.e., buffer overflow, rootkits and code injection) could cause serious financial losses and physical infrastructure damages. Moreover, some specific cyber-attacks against SCADA systems could become a threat to human life. Current commercial off-the-shelf security solutions are insufficient in protecting SCADA systems against sophisticated cyber-attacks. In 2014 a report by Mandiant stated that only 69% of organizations learned about their breaches from third entities, meaning that these companies lack of their own detection system. Furthermore, these breaches are not detected in real-time or fast enough to prevent further damages. The average time between compromise and detection (for those intrusions that were detected) was 205 days. To address this challenge, we propose an Intrusion Detection System (IDS) that detects SCADA-specific cyber-attacks by analyzing the power consumption of a SCADA device. Specifically, to validate the proposed approach, we chose to monitor in real-time the power usage of a a Programmable Logic Controller (PLC). To this end, we configured the hardware of the tetsbed by installing the required sensors to monitor and collect its power consumption. After that two SCADA-specific cyber-attacks were simulated and TracerDAQ Pro was used to collect the power consumption of the PLC under normal and anomalous scenarios. Results showed that is possible to distinguish between the regular power usage of the PLC and when the PLC was under specific cyber-attacks.

Structural model for sustainable consumption and production adoption

DEFF Research Database (Denmark)

Luthra, Sunil; Govindan, Kannan; Mangla, Sachin Kumar

2017-01-01

. “Governmental policies and regulations to develop sustainable consumption and production focused system” and “Management support, dedication and involvement in sustainable consumption and production implementation” have been found as the most influencing drivers and “Gaining the market edge and improving...

Guide to energy management; Veiledning for energiledelse

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-03-15

A systematic and practical guide to energy management. Energy management signifies here a methodology concerning how an organisation continuously can work on improving all aspects of energy efficiency and energy consumption. Focus is on how energy management can be implemented in the companies already existing environment management systems. Useful recommendations and examples are provided (ml)

Study of a method for reducing fuel consumption and the amount of specific emissions of harmful substances with exhaust gases of passenger cars when using the “climate control” system

Science.gov (United States)

Burakova, L. N.; Anisimov, I. A.; Burakova, A. D.; Burakova, O. D.

2018-05-01

The article deals with the issue of improving the fuel economy and environmental friendliness of motor vehicles which serve the administrative and management personnel of the oil and gas industry. It is established that fuel consumption and the amount of specific emissions of harmful substances with exhaust gases of cars when using the “climate control” system depend on the effective ambient temperature, the color of the opaque car body elements, the power of the car engine and the interior volume. However, the simplest controlled factor is the color of the opaque car body elements, which is characterized by the coefficient of light reflection. In the course of experimental studies, we established the dependences of a change in fuel consumption and a share of reducing emissions of harmful substances with exhaust gases of passenger cars with the “climate control” system on the coefficient of light reflection. A method has been developed to reduce fuel consumption and the amount of specific emissions of harmful substances with the exhaust gases of passenger cars using the “climate control” system, which involves painting the vehicle roof white and allows reducing fuel consumption by 5.5-10.3%, and the amount of specific emissions of harmful substances by 0.8-2.3%.

Consumption estimation in system design for real time embedded applications; Estimation de la consommation dans la conception systeme des applications embarquees temps reel

Energy Technology Data Exchange (ETDEWEB)

Laurent, J.

2002-12-15

Today, power and energy consumption have become, as time and area, an important constraint when you design a system. Indeed modern applications use more and more processing and memory resources so these lead a significant increase of consumption. Furthermore, embedded software impact is preponderant in real time system so the code optimisation has a great impact onto the consumption constraint. Several research teams have already developed estimation methodologies for processor but almost are at instruction level (ILPA). With this kind of method you have to measure the consumption of each instruction of the instruction set and also the inter-instruction consumption overhead. For complex architecture, this kind of methodology is not adapted due to the prohibitive number of consumption measures. So the characterisation time of this kind of architecture is too important furthermore with this method is very difficult to take into account the external environment. For actual architecture another method is needed to reduce the characterisation time while preserving the accuracy. The reduction of the characterisation time have to be realized by increasing the abstraction level. So, we propose here a new approach based on a functional and architectural analysis of the target in consumption point of view (FLPA). Our methodology has two steps: the first one is a modeling step and the second is estimation step. (author)

Multiple-use Management of Irrigation Systems: Technical Constraints and Challenges

Science.gov (United States)

Gowing, J.; Li, Q.; Mayilswami, C.; Gunawardhana, K.

selected distributary commands combined with longitudinal studies based on available long- term data from the full command. The reliability and duration of flows and/or storages represent a constraint to effective integration of aquaculture within the case-study sys- tems. Although fish production is non-consumptive and can be seen as a complemen- tary use of irrigation water, the challenge is to devise operating procedures that will 1 guarantee reliability and duration of flows and/or storages for fish production without increasing total water-use within the system. This is a particular problem during the rainy season when irrigation demand fluctuates widely and rapidly. The problem is ex- acerbated by deficient information systems, which constrain the scope for responsive management in these extensive canal systems. 2

Smart EV Energy Management System to Support Grid Services

Science.gov (United States)

Wang, Bin

Under smart grid scenarios, the advanced sensing and metering technologies have been applied to the legacy power grid to improve the system observability and the real-time situational awareness. Meanwhile, there is increasing amount of distributed energy resources (DERs), such as renewable generations, electric vehicles (EVs) and battery energy storage system (BESS), etc., being integrated into the power system. However, the integration of EVs, which can be modeled as controllable mobile energy devices, brings both challenges and opportunities to the grid planning and energy management, due to the intermittency of renewable generation, uncertainties of EV driver behaviors, etc. This dissertation aims to solve the real-time EV energy management problem in order to improve the overall grid efficiency, reliability and economics, using online and predictive optimization strategies. Most of the previous research on EV energy management strategies and algorithms are based on simplified models with unrealistic assumptions that the EV charging behaviors are perfectly known or following known distributions, such as the arriving time, leaving time and energy consumption values, etc. These approaches fail to obtain the optimal solutions in real-time because of the system uncertainties. Moreover, there is lack of data-driven strategy that performs online and predictive scheduling for EV charging behaviors under microgrid scenarios. Therefore, we develop an online predictive EV scheduling framework, considering uncertainties of renewable generation, building load and EV driver behaviors, etc., based on real-world data. A kernel-based estimator is developed to predict the charging session parameters in real-time with improved estimation accuracy. The efficacy of various optimization strategies that are supported by this framework, including valley-filling, cost reduction, event-based control, etc., has been demonstrated. In addition, the existing simulation-based approaches do

Influence of platform screen doors on energy consumption of the environment control system of a mass rapid transit system: case study of the Taipei MRT [mass rapid transit] system

Energy Technology Data Exchange (ETDEWEB)

Shih-Cheng Hu; Jen-Ho Lee [National Taipei University of Technology, Taipei (China). Dept. of Air Conditioning and Refrigeration Engineering

2004-03-01

This investigation studies how platform screen doors (PSD) affect the energy consumption of the environmental control system of a mass rapid transit (MRT) system in Taipei. The environmental parameter simulation was conducted using the subway environmental simulation (SES) program, while the associated air conditioning (A/C) cooling load was predicted with the carrier E20-II program. Results show that PSD can significantly decrease average and peak cooling load, thus reducing the capacity/size of cooling equipment and allowing the chiller cooling load to be abridged. However, electricity consumption by ventilation equipment increases notably when PSD are used, particularly the electricity consumption by the under platform exhaust (UPE) fan, and thus, ultimately, little difference exists in the overall energy consumption with and without UPE. (author)

Review on Malaysian Rail Transit Operation and Management System: Issues and Solution in Integration

Science.gov (United States)

Masirin, Mohd Idrus Mohd; Salin, Aminah Mohd; Zainorabidin, Adnan; Martin, David; Samsuddin, Norshakina

2017-08-01

In any context, operation and management of transportation systems are key issues which may affect both life quality and economic development. In large urban agglomerations, an efficient public transportation system may help abate the negative externalities of private car use such as congestion, air and noise pollution, accident and fuel consumption, without excessively penalizing user travel times or zone accessibility. Thus, this study is conducted to appraise the Malaysian rural rail transit operation and management system, which are considered important as there are many issues and solution in integration of the services that need to be tackled more conscientiously. The purpose of this paper is to describe some of the most important issues on integration of services and rail transit system in Malaysian and how to solve or reduce these problems and conflicts. In this paper, it consists of the historical development of rail transit construction in Malaysia. This paper also attempts to identify the important issues related to rail transit services and integration in Malaysian rural rail operation and management system. Comparison is also conducted with other countries such as UK, France, and Japan. Finally, a critical analysis is presented in this paper by looking at the possible application for future Malaysian rail transit operation system and management, especially focusing on enhancing the quality of Malaysian rural rail transit. In conclusion, this paper is expected to successfully review and appraise the existing Malaysian rural rail transit operation and management system pertaining to issues & solution in integration. It is also hoped that reformation or transformation of present service delivery quality of the rail transit operation and management will enable Malaysia to succeed in transforming Malaysian transportation system to greater heights.

Software and Dataware for Energy Generation and Consumption Analysis System of Gas Processing Enterprises

Science.gov (United States)

Dolotovskii, I. V.; Dolotovskaya, N. V.; Larin, E. A.

2018-05-01

The article presents the architecture and content of a specialized analytical system for monitoring operational conditions, planning of consumption and generation of energy resources, long-term planning of production activities and development of a strategy for the development of the energy complex of gas processing enterprises. A compositional model of structured data on the equipment of the main systems of the power complex is proposed. The correctness of the use of software modules and the database of the analytical system is confirmed by comparing the results of measurements on the equipment of the electric power system and simulation at the operating gas processing plant. A high accuracy in the planning of consumption of fuel and energy resources has been achieved (the error does not exceed 1%). Information and program modules of the analytical system allow us to develop a strategy for improving the energy complex in the face of changing technological topology and partial uncertainty of economic factors.

Management information systems

Energy Technology Data Exchange (ETDEWEB)

Crump, K.

1978-01-01

An Australian university architect studying management information systems programs at academic institutions in the United States visited 26 universities and colleges and nine educational and professional associations, including extended visits at the University of Wisconsin and the National Center of Higher Education Management Systems. During these visits, he investigated university and college space utilization programs, gained operational and developmental experience at institutions with education philosophies similar to those in Australia, and examined trends in low cost student housing. This report of his observations focusses on management information systems projects throughout the academic community, resource accountability, energy conservation, facilities planning for the handicapped, student housing, and interdisciplinary approaches to education.

Design of Parallel Air-Cooled Battery Thermal Management System through Numerical Study

Directory of Open Access Journals (Sweden)

Kai Chen

2017-10-01

Full Text Available In electric vehicles, the battery pack is one of the most important components that strongly influence the system performance. The battery thermal management system (BTMS is critical to remove the heat generated by the battery pack, which guarantees the appropriate working temperature for the battery pack. Air cooling is one of the most commonly-used solutions among various battery thermal management technologies. In this paper, the cooling performance of the parallel air-cooled BTMS is improved through choosing appropriate system parameters. The flow field and the temperature field of the system are calculated using the computational fluid dynamics method. Typical numerical cases are introduced to study the influences of the operation parameters and the structure parameters on the performance of the BTMS. The operation parameters include the discharge rate of the battery pack, the inlet air temperature and the inlet airflow rate. The structure parameters include the cell spacing and the angles of the divergence plenum and the convergence plenum. The results show that the temperature rise and the temperature difference of the batter pack are not affected by the inlet air flow temperature and are increased as the discharge rate increases. Increasing the inlet airflow rate can reduce the maximum temperature, but meanwhile significantly increase the power consumption for driving the airflow. Adopting smaller cell spacing can reduce the temperature and the temperature difference of the battery pack, but it consumes much more power. Designing the angles of the divergence plenum and the convergence plenum is an effective way to improve the performance of the BTMS without occupying more system volume. An optimization strategy is used to obtain the optimal values of the plenum angles. For the numerical cases with fixed power consumption, the maximum temperature and the maximum temperature difference at the end of the five-current discharge process for

Load Management of Data Centers as Regulation Capacity in Denmark

DEFF Research Database (Denmark)

Clausen, Anders; Ghatikar, Girish; Jørgensen, Bo Nørregaard

2014-01-01

are of special interest as they account for 500 GWh of consumption in Denmark or nearly 2% of the total electricity consumption. This paper performs an analysis on load management capabilities of data centers in Denmark based on the experiences in the U.S. We characterize the load management capabilities...... for transmission system operators and distribution system operators and balance errors in forecasts made by balance responsible parties. By enabling the demand-side to adapt consumption to match power generation, we can address this in a cost-effective and environmental sound way. In this context, data centers...... of the data centers based on their types, technology, and their application as grid management resources. Further, we identify demand-side entry barriers towards market participation. Our findings suggest that groups of data centers can offer dynamic load flexibility as virtual power plants, and thereby...

Methodological Approach to Determining the Effect of Parallel Energy Consumption on District Heating System

Science.gov (United States)

Latosov, Eduard; Volkova, Anna; Siirde, Andres; Kurnitski, Jarek; Thalfeldt, Martin

2017-05-01

District heating (DH) offers the most effective way to enhance the efficiency of primary energy use, increasing the share of renewable energy in energy consumption and decreasing the amount of CO2 emissions. According to Article 9 section 1 of the Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings, the Member states of the European Union are obligated to draw up National Plans for increasing the number of nearly zero-energy buildings [1]. Article 2 section 2 of the same Directive states that the energy used in nearly zero-energy buildings should be created covered to a very significant extent by energy from renewable sources, including energy from renewable sources produced on-site or nearby. Thus, the heat distributed by DH systems and produced by manufacturing devices located in close vicinity of the building also have to be taken into account in determining the energy consumption of the building and the share of renewable energy used in the nearly zero-energy buildings. With regard to the spreading of nearly zero-energy and zero-energy houses, the feasibility of on-site energy (heat and/or electricity) production and consumption in DH areas energy (i.e. parallel consumption, when the consumer, connected to DH system, consumes energy for heat production from other sources besides the DH system as well) needs to be examined. In order to do that, it is necessary to implement a versatile methodological approach based on the principles discussed in this article.

Analytics for smart energy management tools and applications for sustainable manufacturing

CERN Document Server

Oh, Seog-Chan

2016-01-01

This book introduces the issues and problems that arise when implementing smart energy management for sustainable manufacturing in the automotive manufacturing industry and the analytical tools and applications to deal with them. It uses a number of illustrative examples to explain energy management in automotive manufacturing, which involves most types of manufacturing technology and various levels of energy consumption. It demonstrates how analytical tools can help improve energy management processes, including forecasting, consumption, and performance analysis, emerging new technology identification as well as investment decisions for establishing smart energy consumption practices. It also details practical energy management systems, making it a valuable resource for professionals involved in real energy management processes, and allowing readers to implement the procedures and applications presented.

Simulation of the fuel consumption benefits of various transmission arrangements and control strategies within a flywheel based mechanical hybrid system

Energy Technology Data Exchange (ETDEWEB)

Body, William; Brockbank, Chris [Torotrak (Development) Ltd. (United Kingdom)

2009-07-01

Flywheel based mechanical hybrid technology is being developed for both motorsport and mainstream automotive applications. One particular road car application project, part funded by the UK Government Technology Strategy Board, is being led by Jaguar Land Rover, managed by Prodrive and using advanced technology from Flybrid Systems, Ford, Ricardo. Torotrak and Xtrac. During the two year programme, the group will develop the new technology and build a demonstrator vehicle equipped with the system. The mechanical system recovers kinetic energy from the vehicle during braking to a high speed rotating flywheel via a variable drive system. When compared to an electric motor / battery arrangement, the mechanical hybrid system offers benefits in cost, weight, package, efficiency and ultimately vehicle fuel consumption. As part of the development and optimisation process in order to specify the road car system, all aspects of the mechanical hybrid system are under investigation by the group. Alongside the required quantity of energy storage and the rates of energy recovery and reapplication, a number of different physical architectures for the system are being analysed. The Torotrak full-toroidal traction drive has been assigned as the variable drive element of the mechanical hybrid system. Multiple configuration options are available including direct drive, epicyclic shunted, range extended CVT and epicyclic shunted IVT arrangements. In addition, the flywheel and variable drive system can be connected to the powertrain in a variety of different locations, from the engine through the powertrain to the wheels. This paper describes the simulation of the mechanical hybrid system with particular focus on the impact on the fuel consumption benefit, over multiple drive cycles, of the variable drive configuration, the location of the variable drive and flywheel system and the control strategy options. (orig.)

Distributed Coordination of Household Electricity Consumption

DEFF Research Database (Denmark)

Juelsgaard, Morten; Teixeira, Andre; Johansson, Mikael

2014-01-01

This work presents a distributed framework for coordination of flexible electricity consumption for a number of households in the distribution grid. We conduct coordination with the purpose of minimizing a trade-off between individual concerns about discomfort and electricity cost, on the one hand......, and joint concerns about grid losses and voltage variations on the other. Our contribution is mainly to illustrate how to conduct distributed coordination when consumers are jointly coupled by grid losses and voltage variations. In addition we illustrate the benefit of including consumption management...... in the grid operation, and how different types of consumption may present various benefits....

Mobilization strategy to overcome global crisis of water consumption

Science.gov (United States)

Suzdaleva, Antonina; Goryunova, Svetlana; Marchuk, Aleksey; Borovkov, Valery

2017-10-01

Today, the global water consumption crisis is one of the main threats that can disrupt socio-economic and environmental conditions of life of the majority of the world’s population. The water consumption mobilization strategy is based on the idea of increasing the available water resources. The main direction for the implementation of this strategy is the construction of anti-rivers - the systems for inter-basin (interregional) water resources redistribution. Antirivers are intended for controlled redistribution of water resources from regions with their catastrophic excess to regions with their critical shortage. The creation of anti-rivers, taking into account the requirements of environmental safety, will form large-scale managed natural- engineering systems and implement the principle of sustainable development adopted by the United Nations. The aim of the article is to substantiate a new methodological approach to address the problem, where the implementation of this approach can prevent large-scale humanitarian and environmental disasters expected in the coming years.

Managing Conflict in Temporary Management Systems

Science.gov (United States)

Wilemon, David L.

1973-01-01

As organizational tasks have grown more complex, several innovative temporary management systems such as matrix management have been developed. The Apollo space program has been an important contribution to the development of matrix management techniques. Discusses the role of conflict within the matrix, its determinants, and the process of…

Management systems in production operations

International Nuclear Information System (INIS)

Walters, K.B.; Henderson, G.

1993-01-01

The Cullen Enquiry into the Piper Alpha disaster in the U.K. North Sea recommended that an operator should formally present it's company Management System and demonstrate how safety is achieved throughout the life cycle of a platform, from design through operation to abandonment. Brunei Shell Petroleum has prepared a corporate level Safety Management System. As part of Safety Case work, the corporate system is being extended to include the development of specific Management Systems with particular emphasis on offshore production operations involving integrated oil and gas facilities. This paper will describe the development of Management Systems, which includes an intensive Business Process Analysis and will comment upon it's applicability and relationship to ISO 9000. The paper will further describe the applicability and benefits of Management Systems and offer guidance on required effort. The paper will conclude that development of structured Management Systems for safety critical business processes is worthwhile but prioritization of effort will be necessary. As such the full adoption of Management Systems will be directional in nature

Simulation of value stream mapping and discrete optimization of energy consumption in modular construction

Science.gov (United States)

Chowdhury, Md Mukul

With the increased practice of modularization and prefabrication, the construction industry gained the benefits of quality management, improved completion time, reduced site disruption and vehicular traffic, and improved overall safety and security. Whereas industrialized construction methods, such as modular and manufactured buildings, have evolved over decades, core techniques used in prefabrication plants vary only slightly from those employed in traditional site-built construction. With a focus on energy and cost efficient modular construction, this research presents the development of a simulation, measurement and optimization system for energy consumption in the manufacturing process of modular construction. The system is based on Lean Six Sigma principles and loosely coupled system operation to identify the non-value adding tasks and possible causes of low energy efficiency. The proposed system will also include visualization functions for demonstration of energy consumption in modular construction. The benefits of implementing this system include a reduction in the energy consumption in production cost, decrease of energy cost in the production of lean-modular construction, and increase profit. In addition, the visualization functions will provide detailed information about energy efficiency and operation flexibility in modular construction. A case study is presented to validate the reliability of the system.

On monitoring unrecorded alcohol consumption

OpenAIRE

Rehm, Jürgen; Poznyak, Vladimir

2015-01-01

Unrecorded alcohol consumption is a global problem, with about 25% of all alcohol consumption concerning this category. There are different forms of unrecorded alcohol, legally produced versus illegally produced, artisanal vs industrially produced, and then surrogate alcohol, which is officially not intended for human consumption. Monitoring and surveillance of unrecorded consumption is not well developed. The World Health Organization has developed a monitoring system, using the Nominal Grou...

Energy-efficiency supervision systems for energy management in large public buildings: Necessary choice for China

International Nuclear Information System (INIS)

Feng Yanping; Wu Yong; Liu Changbin

2009-01-01

Buildings are important contributors to total energy consumption accounting for around 30% of all energy consumed in China. Of this, around two-fifths are consumed within urban homes, one-fifth within public buildings, and two-fifths within rural area. Government office buildings and large-scale public buildings are the dominant energy consumers in cities but their consumption can be largely cut back through improving efficiency. At present, energy management in the large public sector is a particular priority in China. Firstly, this paper discusses how the large public building is defined, and then energy performance in large public buildings is studied. The paper also describes barriers to improving energy efficiency of large public buildings in China and examines the energy-efficiency policies and programs adopted in United States and European Union. The energy-efficiency supervision (EES) systems developed to improve operation and maintenance practices and promote energy efficiency in large public sector are described. The benefits of the EES systems are finally summarized.

Energy-efficiency supervision systems for energy management in large public buildings. Necessary choice for China

Energy Technology Data Exchange (ETDEWEB)

Yan-ping, Feng [Beijing Jiaotong University, School of Economics and Management, Jiaoda Donglu18, 5-803, Beijing 100044 (China); Yong, Wu [Ministry of Housing and Urban-Rural Development, Beijing 100835 (China); Chang-bin, Liu [Beijing Institute of Civil Engineering and Architecture, Beijing 100044 (China)

2009-06-15

Buildings are important contributors to total energy consumption accounting for around 30% of all energy consumed in China. Of this, around two-fifths are consumed within urban homes, one-fifth within public buildings, and two-fifths within rural area. Government office buildings and large-scale public buildings are the dominant energy consumers in cities but their consumption can be largely cut back through improving efficiency. At present, energy management in the large public sector is a particular priority in China. Firstly, this paper discusses how the large public building is defined, and then energy performance in large public buildings is studied. The paper also describes barriers to improving energy efficiency of large public buildings in China and examines the energy-efficiency policies and programs adopted in United States and European Union. The energy-efficiency supervision (EES) systems developed to improve operation and maintenance practices and promote energy efficiency in large public sector are described. The benefits of the EES systems are finally summarized. (author)

Energy-efficiency supervision systems for energy management in large public buildings: Necessary choice for China

Energy Technology Data Exchange (ETDEWEB)

Feng Yanping [Beijing Jiaotong University, School of Economics and Management, Jiaoda Donglu18, 5-803, Beijing 100044 (China)], E-mail: fengyanping10@sohu.com; Wu Yong [Ministry of Housing and Urban-Rural Development, Beijing 100835 (China); Liu Changbin [Beijing Institute of Civil Engineering and Architecture, Beijing 100044 (China)

2009-06-15

Buildings are important contributors to total energy consumption accounting for around 30% of all energy consumed in China. Of this, around two-fifths are consumed within urban homes, one-fifth within public buildings, and two-fifths within rural area. Government office buildings and large-scale public buildings are the dominant energy consumers in cities but their consumption can be largely cut back through improving efficiency. At present, energy management in the large public sector is a particular priority in China. Firstly, this paper discusses how the large public building is defined, and then energy performance in large public buildings is studied. The paper also describes barriers to improving energy efficiency of large public buildings in China and examines the energy-efficiency policies and programs adopted in United States and European Union. The energy-efficiency supervision (EES) systems developed to improve operation and maintenance practices and promote energy efficiency in large public sector are described. The benefits of the EES systems are finally summarized.

Management Information Systems Research.

Science.gov (United States)

Research on management information systems is illusive in many respects. Part of the basic research problem in MIS stems from the absence of standard...decision making. But the transition from these results to the realization of ’satisfactory’ management information systems remains difficult indeed. The...paper discusses several aspects of research on management information systems and reviews a selection of efforts that appear significant for future progress. (Author)

A system dynamics analysis of energy consumption and corrective policies in Iranian iron and steel industry

International Nuclear Information System (INIS)

Ansari, Nastaran; Seifi, Abbas

2012-01-01

Iron and steel industry is the most energy intensive industrial sector in Iran. Long time subsidized energy has led to low energy efficiency in this industry. The sudden subsidy reform of energy prices in Iran is expected to have a great impact on steel production and energy consumption. A system dynamics model is presented in this paper to analyze steel demand, production and energy consumption in an integrated framework. A co-flow structure is used to show how subsidy reform affects energy consumption in the long run. The main focus of this paper is on direct and indirect natural gas consumption in the steel industry. Scrap based Electric Arc Furnace technology has been evaluated as an energy efficient way for steel making. The energy consumption in steel industry is estimated under various steel production and export scenarios while taking into account new energy prices to see the outlook of possible energy demand in steel industry over next 20 years. For example it is shown that under reference production scenario, potential reduction in gas consumption forced by complete removal of energy subsidy and utilizing scrap could lead to 85 billion cubic meters of gas saving over the next 20 years. -- Highlights: ► We develop a system dynamics model to analyze steel demand, production and energy consumption in Iran. ► Various scenarios have been simulated to see the energy demand of Iranian steel industry over the next 20 years. ► A co-flow structure is used to show how subsidy reform would affect energy consumption in the long run. ► A co-flow structure has been built into the SD model to formulate consumers' behavior in response to energy prices. ► Scrap based Electric Arc Furnace technology has been evaluated as an energy efficient alternative for steel making.

Construction Management Risk System (CMRS for Construction Management (CM Firms

Directory of Open Access Journals (Sweden)

Kyungmo Park

2017-02-01

Full Text Available After the global financial crisis of 2008, the need for risk management arose because it was necessary to minimize the losses in construction management (CM firms. This was caused by a decreased amount of orders in the Korean CM market, which intensified order competition between companies. However, research results revealed that risks were not being systematically managed owing to the absence of risk management systems. Thus, it was concluded that it was necessary to develop standard operating systems and implement risk management systems in order to manage risks effectively. Therefore, the purpose of this study was to develop a construction risk management system (CRMS for systematically managing risks. For this purpose, the field operation managers of CM firms were interviewed and surveyed in order to define risk factors. Upon this, a risk assessment priority analysis was performed. Finally, a risk management system that comprised seven modules and 20 sub-modules and was capable of responding systematically to risks was proposed. Furthermore, the effectiveness of this system was verified through on-site inspection. This system allows early response to risks, accountability verification and immediate response to legal disputes with clients by managing risk records.

Forecasting HotWater Consumption in Residential Houses

Directory of Open Access Journals (Sweden)

Linas Gelažanskas

2015-11-01

Full Text Available An increased number of intermittent renewables poses a threat to the system balance. As a result, new tools and concepts, like advanced demand-side management and smart grid technologies, are required for the demand to meet supply. There is a need for higher consumer awareness and automatic response to a shortage or surplus of electricity. The distributed water heater can be considered as one of the most energy-intensive devices, where its energy demand is shiftable in time without influencing the comfort level. Tailored hot water usage predictions and advanced control techniques could enable these devices to supply ancillary energy balancing services. The paper analyses a set of hot water consumption data from residential dwellings. This work is an important foundation for the development of a demand-side management strategy based on hot water consumption forecasting at the level of individual residential houses. Various forecasting models, such as exponential smoothing, seasonal autoregressive integrated moving average, seasonal decomposition and a combination of them, are fitted to test different prediction techniques. These models outperform the chosen benchmark models (mean, naive and seasonal naive and show better performance measure values. The results suggest that seasonal decomposition of the time series plays the most significant part in the accuracy of forecasting.

Development of Information Management System for Plant Life Cycle Management

International Nuclear Information System (INIS)

Byon, SuJin; Lee, SangHyun; Kim, WooJoong

2015-01-01

The study subjects are S. Korean NPP(Nuclear Power Plant) construction projects. Design, construction, operations companies have different nuclear power plant construction project structures, and each company has its own Information Management System. In this study, the end user developed an Information Management System early in the project, and developed a management structure that systematically integrates and interfaces with information in each lifecycle phase. The main perspective of Information Management is moving from the existent document-centric management to the data-centric management. To do so, we intend to integrate information with interfaces among systems. Integrated information management structure and management system are essential for an effective management of the lifecycle information of nuclear power plants that have a lifespan over as much as 80 years. The concept of integration management adopted by the defence, ocean industries or various PLM solution providers is important. Although the NPP project has application systems in each key lifecycle phase, it is more effective to develop and use PLIMS in consideration of the interface and compatibility of information among systems. As an initial study for development of that integrated information management structure, this study is building the system and has interfaced it with a design-stage system

Development of Information Management System for Plant Life Cycle Management

Energy Technology Data Exchange (ETDEWEB)

Byon, SuJin; Lee, SangHyun; Kim, WooJoong [KOREA HYDRO and NUCLEAR POWER CO. LTD, Daejeon (Korea, Republic of)

2015-10-15

The study subjects are S. Korean NPP(Nuclear Power Plant) construction projects. Design, construction, operations companies have different nuclear power plant construction project structures, and each company has its own Information Management System. In this study, the end user developed an Information Management System early in the project, and developed a management structure that systematically integrates and interfaces with information in each lifecycle phase. The main perspective of Information Management is moving from the existent document-centric management to the data-centric management. To do so, we intend to integrate information with interfaces among systems. Integrated information management structure and management system are essential for an effective management of the lifecycle information of nuclear power plants that have a lifespan over as much as 80 years. The concept of integration management adopted by the defence, ocean industries or various PLM solution providers is important. Although the NPP project has application systems in each key lifecycle phase, it is more effective to develop and use PLIMS in consideration of the interface and compatibility of information among systems. As an initial study for development of that integrated information management structure, this study is building the system and has interfaced it with a design-stage system.

Experimental Verification and Integration of a Next Generation Smart Power Management System

Science.gov (United States)

Clemmer, Tavis B.

With the increase in energy demand by the residential community in this country and the diminishing fossil fuel resources being used for electric energy production there is a need for a system to efficiently manage power within a residence. The Smart Green Power Node (SGPN) is a next generation energy management system that automates on-site energy production, storage, consumption, and grid usage to yield the most savings for both the utility and the consumer. Such a system automatically manages on-site distributed generation sources such as a PhotoVoltaic (PV) input and battery storage to curtail grid energy usage when the price is high. The SGPN high level control features an advanced modular algorithm that incorporates weather data for projected PV generation, battery health monitoring algorithms, user preferences for load prioritization within the home in case of an outage, Time of Use (ToU) grid power pricing, and status of on-site resources to intelligently schedule and manage power flow between the grid, loads, and the on-site resources. The SGPN has a scalable, modular architecture such that it can be customized for user specific applications. This drove the topology for the SGPN which connects on-site resources at a low voltage DC microbus; a two stage bi-directional inverter/rectifier then couples the AC load and residential grid connect to on-site generation. The SGPN has been designed, built, and is undergoing testing. Hardware test results obtained are consistent with the design goals set and indicate that the SGPN is a viable system with recommended changes and future work.

A New System for Households in Spain to Evaluate and Reduce Their Water Consumption

Directory of Open Access Journals (Sweden)

Alberto Gutierrez-Escolar

2014-01-01

Full Text Available The objective of this paper is to describe a developed model and its corresponding application, known as System to Evaluate the Water Consumption at Home (SEWAT. The aim is to create a new model to evaluate the efficiency of water consumption. Thanks to the input of the water bills by users, the model allows them to check if water consumption is efficient, in order to give them an opportunity to evaluate their water usage. To succeed in it, several researches were tracked in order to establish consumer trends and to identify the most efficient value for this magnitude. Furthermore, a survey was conducted to obtain updated values to validate information from previous studies. However, the main aim of this model is to use the resources efficiently, so it has to be useful accordingly. Therefore, after the evaluation, the application has a section with recommendations for the users to reduce their water consumption through a range of different indications. This section is divided into four: bathroom, kitchen, new appliance and reusing water. Each section shows the expected benefits if the users follow the recommended options. The main result is a unique application in Spain, which includes a system of evaluation, comparison and a section of recommendations for the users. Eventually, the model will have a promising outcome, because it surely will change the awareness of citizens about this subject.

Research on the Multi-Energy Management Strategy of the Electric Drive System of a Tracked Bulldozer

Directory of Open Access Journals (Sweden)

Ming Pan

2016-01-01

Full Text Available The multi-energy management strategy of electric drive system of tracked bulldozer was researched. Firstly, based on power requirement of typical working condition of a tracked bulldozer, the power distribution strategy for three energy sources in the front power chain was proposed by using wavelet theory and fuzzy control theory. Secondly, the electric drive system simulation platform was built in MATLAB/Simulink. At last, a driver-controller based HILS (hardware-in-the-loop simulation platform was built and the multi-energy management strategy was verified. The HILS result shows that front power chain’s power output can meet the back power chain’s requirement, the engine-generator set works near the best fuel consumption curve, and the battery pack’s charge-discharge frequency and current are low. Thus the designed multi-energy management strategy can be used in real-time control of electric drive bulldozer.

System and method for controlling power consumption in a computer system based on user satisfaction

Science.gov (United States)

Yang, Lei; Dick, Robert P; Chen, Xi; Memik, Gokhan; Dinda, Peter A; Shy, Alex; Ozisikyilmaz, Berkin; Mallik, Arindam; Choudhary, Alok

2014-04-22

Systems and methods for controlling power consumption in a computer system. For each of a plurality of interactive applications, the method changes a frequency at which a processor of the computer system runs, receives an indication of user satisfaction, determines a relationship between the changed frequency and the user satisfaction of the interactive application, and stores the determined relationship information. The determined relationship can distinguish between different users and different interactive applications. A frequency may be selected from the discrete frequencies at which the processor of the computer system runs based on the determined relationship information for a particular user and a particular interactive application running on the processor of the computer system. The processor may be adapted to run at the selected frequency.

Experimental analysis and management issues of a hydrogen fuel cell system for stationary and mobile application

International Nuclear Information System (INIS)

Corbo, Pasquale; Migliardini, Fortunato; Veneri, Ottorino

2007-01-01

A laboratory fuel cell system based on a 20 kW H 2 /air proton exchange membrane stack was designed, realized and characterized with the aim to elucidate specific concerns to be considered for both hydrogen stationary power systems and automotive applications. The overall system characterization permitted the effect of the main operative variables (temperature, pressure and stoichiometric ratio) on stack power and efficiency to be evaluated. Reactant feeding, humidification and cooling problems are discussed, evidencing in particular the roles of air compressor, fuel purge, stack temperature and humidification strategy in system management. The characterization results are analyzed in terms of H 2 consumption and available power, evidencing the energy losses of the individual fuel cell system components. In particular, the data obtained on key components (stack, reactants, heat and water management devices) are used for a critical discussion about their specifications and operation characteristics as demanded by both stationary and mobile applications

Experimental analysis and management issues of a hydrogen fuel cell system for stationary and mobile application

Energy Technology Data Exchange (ETDEWEB)

Corbo, Pasquale; Migliardini, Fortunato; Veneri, Ottorino [Istituto Motori of Italian National Research Council, Via Marconi 8, 80125 Napoli (Italy)

2007-08-15

A laboratory fuel cell system based on a 20 kW H{sub 2}/air proton exchange membrane stack was designed, realized and characterized with the aim to elucidate specific concerns to be considered for both hydrogen stationary power systems and automotive applications. The overall system characterization permitted the effect of the main operative variables (temperature, pressure and stoichiometric ratio) on stack power and efficiency to be evaluated. Reactant feeding, humidification and cooling problems are discussed, evidencing in particular the roles of air compressor, fuel purge, stack temperature and humidification strategy in system management. The characterization results are analyzed in terms of H{sub 2} consumption and available power, evidencing the energy losses of the individual fuel cell system components. In particular, the data obtained on key components (stack, reactants, heat and water management devices) are used for a critical discussion about their specifications and operation characteristics as demanded by both stationary and mobile applications. (author)

Strategic management of health care information systems: nurse managers' perceptions.

Science.gov (United States)

Lammintakanen, Johanna; Kivinen, Tuula; Saranto, Kaija; Kinnunen, Juha

2009-01-01

The aim of this study is to describe nurse managers' perceptions of the strategic management of information systems in health care. Lack of strategic thinking is a typical feature in health care and this may also concern information systems. The data for this study was collected by eight focus group interviews including altogether 48 nurse managers from primary and specialised health care. Five main categories described the strategic management of information systems in health care; IT as an emphasis of strategy; lack of strategic management of information systems; the importance of management; problems in privacy protection; and costs of IT. Although IT was emphasised in the strategies of many health care organisations, a typical feature was a lack of strategic management of information systems. This was seen both as an underutilisation of IT opportunities in health care organisations and as increased workload from nurse managers' perspective. Furthermore, the nurse managers reported that implementation of IT strengthened their managerial roles but also required stronger management. In conclusion, strategic management of information systems needs to be strengthened in health care and nurse managers should be more involved in this process.

Environmental impacts of electricity self-consumption from organic photovoltaic battery systems at industrial facilities in Denmark

DEFF Research Database (Denmark)

Chatzisideris, Marios Dimos; Laurent, Alexis; Hauschild, Michael Zwicky

2017-01-01

investigate the life cycle environmental impacts of electricity self-consumption from an OPV system coupled with a sodium/nickel chloride battery at an iron/metal industry in Denmark. Results show that an OPV system without storage could decrease the carbon footprint of the industry; installation......Organic photovoltaics (OPV) show promise of greatly improving the environmental and economic performance of PV compared to conventional silicon. Life cycle assessment studies have assessed the environmental impacts of OPV, but not under a self-consumption scheme for industrial facilities. We...

Modelling Electrical Energy Consumption in Automotive Paint Shop

Science.gov (United States)

Oktaviandri, Muchamad; Safiee, Aidil Shafiza Bin

2018-03-01

Industry players are seeking ways to reduce operational cost to sustain in a challenging economic trend. One key aspect is an energy cost reduction. However, implementing energy reduction strategy often struggle with obstructions, which slow down their realization and implementation. Discrete event simulation method is an approach actively discussed in current research trend to overcome such obstructions because of its flexibility and comprehensiveness. Meanwhile, in automotive industry, paint shop is considered the most energy consumer area which is reported consuming about 50%-70% of overall automotive plant consumption. Hence, this project aims at providing a tool to model and simulate energy consumption at paint shop area by conducting a case study at XYZ Company, one of the automotive companies located at Pekan, Pahang. The simulation model was developed using Tecnomatix Plant Simulation software version 13. From the simulation result, the model was accurately within ±5% for energy consumption and ±15% for maximum demand after validation with real system. Two different energy saving scenarios were tested. Scenario 1 was based on production scheduling approach under low demand situation which results energy saving up to 30% on the consumption. Meanwhile scenario 2 was based on substituting high power compressor with the lower power compressor. The results were energy consumption saving of approximately 1.42% and maximum demand reduction about 1.27%. This approach would help managers and engineers to justify worthiness of investment for implementing the reduction strategies.

Medical-Information-Management System

Science.gov (United States)

Alterescu, Sidney; Friedman, Carl A.; Frankowski, James W.

1989-01-01

Medical Information Management System (MIMS) computer program interactive, general-purpose software system for storage and retrieval of information. Offers immediate assistance where manipulation of large data bases required. User quickly and efficiently extracts, displays, and analyzes data. Used in management of medical data and handling all aspects of data related to care of patients. Other applications include management of data on occupational safety in public and private sectors, handling judicial information, systemizing purchasing and procurement systems, and analyses of cost structures of organizations. Written in Microsoft FORTRAN 77.

DETERMINATION OF PROCESSES OF USE, PRESERVING AND REPRODUCTION IN THE SYSTEM OF RENEWABLE NATURAL RESOURCES MANAGEMENT

Directory of Open Access Journals (Sweden)

Mikhail Gazuda

2015-11-01

Full Text Available The purpose of the paper is to develop factor model of renewable natural resources management, specifying the assessment of the amount of resource, including the natural factor, consumption level and intensity of reproduction. Methodology. The survey is based on highlighting factors influencing the reproductive capacity of natural environment. It allows, on the base of taking into consideration reproductive abilities of resources and intensity of consumption, to substantiate three models for their use, including: heavy exploitation of renewable natural resources as the most commonly used model at the current level of development of society; model of reproductive use of natural resources, stipulating for the interference from the side of authorities and management, and the model of simple reproduction of renewable natural resources, at which the resource itself and the amount of its reproduction for the next period remain constant. Practical implications. The need is substantiated in implementation of the new model for determination of the processes of managing balanced use of natural resources, which will stipulate processes of reproduction in the sphere of natural management, form new approaches to environmental protection and promote the optimal ratio between the consumption and reproduction of natural resources. At this, the processes of natural reproduction are influenced by the amount of resource itself, intensity of its reproduction and level of consumption. The main objective of the managing bodies in the sphere of the use of renewable natural resources should be securing optimal ratio between consumption and reproduction of such natural resources. The efficiency of the implementation process and reproduction of natural resources presupposes providing their simple and extended reproduction, economic effectiveness and sustainability in allocation and use of such resources. This will have positive effect on ecological and economic security

Heating technologies for limiting biomass consumption in 100% renewable energy systems

DEFF Research Database (Denmark)

Mathiesen, Brian Vad; Lund, Henrik; Connolly, David

2011-01-01

district heating enables the use of combined heat and power production (CPH) and other renewable resources than biomass such as large-scale solar thermal, large-heat pumps, geothermal heat, industrial surplus heat etc. which is important for reducing the biomass consumption. Where the energy density......The utilisation of biomass poses large challenges in renewable energy systems and buildings account for a substantial part of the energy supply also in 100% renewable energy systems. The analyses of heating technologies show that district heating systems are especially important in limiting...... the dependence on biomass resources and to create cost effective systems. District heating systems are especially important in renewable energy systems with large amounts of fluctuating renewable energy sources as it enables fuel efficient and lower cost energy systems with thermal heat storages. And also...

Physiological responses and air consumption during simulated firefighting tasks in a subway system.

Science.gov (United States)

Williams-Bell, F Michael; Boisseau, Geoff; McGill, John; Kostiuk, Andrew; Hughson, Richard L

2010-10-01

Professional firefighters (33 men, 3 women), ranging in age from 30 to 53 years, participated in a simulation of a subway system search and rescue while breathing from their self-contained breathing apparatus (SCBA). We tested the hypothesis that during this task, established by expert firefighters to be of moderate intensity, the rate of air consumption would exceed the capacity of a nominal 30-min cylinder. Oxygen uptake, carbon dioxide output, and air consumption were measured with a portable breath-by-breath gas exchange analysis system, which was fully integrated with the expired port of the SCBA. The task involved descending a flight of stairs, walking, performing a search and rescue, retreat walking, then ascending a single flight of stairs to a safe exit. This scenario required between 9:56 and 13:24 min:s (mean, 12:10 ± 1:10 min:s) to complete, with an average oxygen uptake of 24.3 ± 4.5 mL kg(-1) min(-1) (47 ± 10 % peak oxygen uptake) and heart rate of 76% ± 7% of maximum. The highest energy requirement was during the final single-flight stair climb (30.4 ± 5.4 mL kg(-1) min(-1)). The average respiratory exchange ratio (carbon dioxide output/oxygen uptake) throughout the scenario was 0.95 ± 0.08, indicating a high carbon dioxide output for a relatively moderate average energy requirement. Air consumption from the nominal "30-min" cylinder averaged 51% (range, 26%-68%); however, extrapolation of these rates of consumption suggested that the low-air alarm, signalling that only 25% of the air remains, would have occurred as early as 11 min for an individual with the highest rate of air consumption, and at 16 min for the group average. These data suggest that even the moderate physical demands of walking combined with search and rescue while wearing full protective gear and breathing through the SCBA impose considerable physiological strain on professional firefighters. As well, the rate of air consumption in these tasks classed as moderate, compared

Change-over natural and mechanical ventilation system energy consumption in single-family buildings

Science.gov (United States)

Kostka, Maria; Szulgowska-Zgrzywa, Małgorzata

2017-11-01

The parameters of the outside air in Poland cause that in winter it is reasonable to use a mechanical ventilation equipped with a heat recovery exchanger. The time of spring, autumn, summer evenings and nights are often characterized by the parameters of the air, which allow for a natural ventilation and reduce the electricity consumption. The article presents the possibilities of energy consumption reduction for three energy standards of buildings located in Poland, ventilated by a change-over hybrid system. The analysis was prepared on the assumption that the air-to-water heat pump is the heat source for the buildings.

On-line energy and battery thermal management for hybrid electric heavy-duty truck

NARCIS (Netherlands)

Pham, H.T.; Kessels, J.T.B.A.; Bosch, van den P.P.J.; Huisman, R.G.M.; Nevels, R.M.P.A.

2013-01-01

This paper discusses an integrated approach for energy and thermal management to minimize the fuel consumption of a hybrid electric heavy-duty truck. Conventional Energy Management Systems (EMS) operate separately from the Battery Thermal Management System (BTMS) in Hybrid Electric Vehicles (HEVs).

Techno economic systems and excessive consumption: a political economy of 'pathological' gambling.

Science.gov (United States)

Reith, Gerda

2013-12-01

This article argues that gambling is a paradigmatic form of consumption that captures the intensified logic at the heart of late modern capitalist societies. As well as a site of intensified consumption, it claims that gambling has also become the location of what has been described as a new form of 'social pathology' related to excess play. Drawing on Castells' (1996) notion of techno-economic systems, it explores the ways that intersections between technology, capital and states have generated the conditions for this situation, and critiques the unequal distribution of gambling environments that result. It argues that, while the products of these systems are consumed on a global scale, the risks associated with them tend to be articulated in bio-psychological discourses of 'pathology' which are typical of certain types of knowledge that have salience in neo-liberal societies, and which work to conceal wider structural relationships. We argue that a deeper understanding of the political and cultural economy of gambling environments is necessary, and provide a synoptic overview of the conditions upon which gambling expansion is based. This perspective highlights parallels with the wider global economy of finance capital, as well as the significance of intensified consumption, of which gambling is an exemplary instance. It also reveals the existence of a geo-political dispersal of 'harms', conceived as deteriorations of financial, temporal and social relationships, which disproportionately affect vulnerable social groups. From this, we urge an understanding of commercial gambling based on a critique of the wider social body of gambling environments within techno economic systems, rather than the (flawed) individual bodies within them. © London School of Economics and Political Science 2013.

Integrated management system

International Nuclear Information System (INIS)

Florescu, N.

2003-01-01

A management system is developed in order to reflect the needs of the business and to ensure that the objectives of the organization will be achieved. The process model and each individual process within the system then needs to identify the drives or requirements from external customers and stakeholders, regulations, and standards such as ISO and 50-C-Q. The processes are then developed to address these drivers. Developing the process in this way makes it fully integrated and capable of incorporating any new requirements. The International Standard (ISO 9000:2000) promotes the adoption of a process approach when developing, implementing and improving the effectiveness of a quality management system to enhance customer satisfaction by meeting customer requirements. The IAEA Code recognizes that the entire work is a process which can be planned, assessed and improved. For an organization to function effectively, numerous linked activities have to be identified and managed. By definition a process is an activity that using resources and taking into account all the constraints imposed executes the necessary operations which transform the inputs in outcomes. Running a system of processes within an organization, identification of the interaction between the processes and their management can be referred to as a 'process approach'. The advantage of such an approach is the ensuring of the ongoing control over the linkage between the individual processes composing the system as well as over their combination and interaction. Developing a management system implies: identification of the process which delivers Critical Success Factor (CSFs) of the business; identifying the support processes enabling the CSFs to be accomplished; identifying the processes that deliver the business fundamentals. An integrated management system should include all activities not only those related to Quality, Health and Safety. When developing an IMS it is necessary to identify all of the drivers

Impacts of climate change on the municipal water management system in the Kingdom of Bahrain: Vulnerability assessment and adaptation options

Directory of Open Access Journals (Sweden)

Waleed K. Al-Zubari

Full Text Available An assessment of the vulnerability of the municipal water management system to the impacts of climate change in the Kingdom of Bahrain, manifested by the increase in demands due to increase in temperatures, is conducted using a dynamic mathematical model representing the water sector in the kingdom. The model is developed using WEAP software and was calibrated and validated by historical matching utilizing data for the period 2000–2012. The model is used in the evaluation of the municipal water sector performance in terms of municipal water demands and their associated cost without and with climate change impacts scenarios for the period 2012–2030. The impact of climate change on the municipal water system is quantified as the difference between the two scenarios in three selected cost indicators: financial (production, conveyance and distribution costs, economic (natural gas asset consumption by desalination plants, and environmental (CO2 emissions by desalination plants. The vulnerability assessment indicated that the current municipal water management system in Bahrain is generally inefficient and associated with relatively high costs, which are expected to increase with time under the current policies and management approach focusing on supply-side management. The increase in temperature will increase these already high costs, and would exacerbate the water management challenges in Bahrain. However, these mounting challenges also present an opportune moment for Bahrain to review its current water resources management approaches and practices and to integrate climate change adaptation measures into its water planning and policies. In order to build an adaptive management capacity of the municipal water management system in Bahrain, a number of management interventions are proposed and evaluated, individually and combined, for their effectiveness in enhancing the efficiency of the management system using the developed dynamic model. These

Guidelines on nitrogen management in agricultural systems

International Nuclear Information System (INIS)

2008-01-01

This publication deals with the topic of nitrogen management in agro-ecosystems. Nitrogen (N) is an essential plant nutrient, and N deficiency severely restricts crop yields in most cultivated soils. Therefore, substantial N inputs are required for optimum plant growth and adequate food, feed and fibre production. Developing countries use more than 55 million metric tons (t) of N fertilizers at an estimated value of US $16 billion annually, of which approximately 2 million t are used in Africa, 5 in Latin America and 50 in Asia. It is estimated that adequate production of food (in particular cereals) for present and future populations will not be achieved without external inputs of fertilizer N. However, management practices involving fertilizer N should be efficient in order to optimize crop production while minimizing adverse effects on the environment. Moreover, the use of alternative N sources such as organic residues and biological nitrogen fixation should be increased within the context of integrated soil fertility management to ensure food security in areas of the world where fertilizer N is too expensive or simply not available. At present, legumes such as soybean, common bean, groundnuts, chickpeas, cowpeas, etc., are fixing approximately 11 million t of N in developing countries. This publication covers, concisely and comprehensively, key topics dealing with the utilization of all sources of N in farming systems, in particular to demonstrate to scientists in developing countries how isotopic tracer technologies can be used in research to improve overall N use efficiency in agricultural systems while increasing crop yields in a sustainable manner, i.e. conserving the natural resource base and protecting the environment. It is a timely publication; increasing attention is being paid to N management in food production, energy consumption and environmental protection. The subject matter is covered in four chapters, starting with an introduction to N

Business advertisements management system

OpenAIRE

Rekel, Ernest

2017-01-01

Business Advertisements Management System The main goal of the project was to create a business advertisements management system, where users could easily create and find business advertisements. To accomplish this goal exist- ing systems were analyzed as well as their limitations. The end result is a working system which is able to store and proccess huge amount of data.

Pembangunan Model Restaurant Management System

OpenAIRE

Fredy Jingga; Natalia Limantara

2014-01-01

Model design for Restaurant Management System aims to help in restaurant business process, where Restaurant Management System (RMS) help the waitress and chef could interact each other without paper limitation.  This Restaurant Management System Model develop using Agile Methodology and developed based on PHP Programming Langguage. The database management system is using MySQL. This web-based application model will enable the waitress and the chef to interact in realtime, from the time they a...

REDUCING GREENHOUSE EMISSIONS AND FUEL CONSUMPTION

Directory of Open Access Journals (Sweden)

Susan A. SHAHEEN, Ph.D.

2007-01-01

Fortunately, transportation technologies and strategies are emerging that can help to meet the climate challenge. These include automotive and fuel technologies, intelligent transportation systems (ITS, and mobility management strategies that can reduce the demand for private vehicles. While the climate change benefits of innovative engine and vehicle technologies are relatively well understood, there are fewer studies available on the energy and emission impacts of ITS and mobility management strategies. In the future, ITS and mobility management will likely play a greater role in reducing fuel consumption. Studies are often based on simulation models, scenario analysis, and limited deployment experience. Thus, more research is needed to quantify potential impacts. Of the nine ITS technologies examined, traffic signal control, electronic toll collection, bus rapid transit, and traveler information have been deployed more widely and demonstrated positive impacts (but often on a limited basis. Mobility management approaches that have established the greatest CO2 reduction potential, to date, include road pricing policies (congestion and cordon and carsharing (short-term auto access. Other approaches have also indicated CO2 reduction potential including: low-speed modes, integrated regional smart cards, park-and-ride facilities, parking cash out, smart growth, telecommuting, and carpooling.

Senior Management Use of Management Control Systems in Large Companies

DEFF Research Database (Denmark)

Willert, Jeanette; Israelsen, Poul; Rohde, Carsten

2017-01-01

Ferreira and Otley’s (2009) conceptual and holistic framework for performance management systems, supplemented by elements of contextual factors and organisational culture. Further, selected researchers’ perceptions of the purpose of using management control systems are related to practitioners’ ideas......The use of management control systems in large companies remains relatively unexplored. Indeed, only a few studies of senior managers’ use of management control systems consider multiple controls in companies. This paper explores data from a comprehensive survey of the use of management control...... systems in 120 strategic business units at some of the largest companies in Denmark. The paper identifies how senior management guides and controls their subordinates to meet their companies’ objectives. The presentation and discussion of the results, including citations from executive managers, use...

Materials management information systems.

Science.gov (United States)

1996-01-01

The hospital materials management function--ensuring that goods and services get from a source to an end user--encompasses many areas of the hospital and can significantly affect hospital costs. Performing this function in a manner that will keep costs down and ensure adequate cash flow requires effective management of a large amount of information from a variety of sources. To effectively coordinate such information, most hospitals have implemented some form of materials management information system (MMIS). These systems can be used to automate or facilitate functions such as purchasing, accounting, inventory management, and patient supply charges. In this study, we evaluated seven MMISs from seven vendors, focusing on the functional capabilities of each system and the quality of the service and support provided by the vendor. This Evaluation is intended to (1) assist hospitals purchasing an MMIS by educating materials managers about the capabilities, benefits, and limitations of MMISs and (2) educate clinical engineers and information system managers about the scope of materials management within a healthcare facility. Because software products cannot be evaluated in the same manner as most devices typically included in Health Devices Evaluations, our standard Evaluation protocol was not applicable for this technology. Instead, we based our ratings on our observations (e.g., during site visits), interviews we conducted with current users of each system, and information provided by the vendor (e.g., in response to a request for information [RFI]). We divided the Evaluation into the following sections: Section 1. Responsibilities and Information Requirements of Materials Management: Provides an overview of typical materials management functions and describes the capabilities, benefits, and limitations of MMISs. Also includes the supplementary article, "Inventory Cost and Reimbursement Issues" and the glossary, "Materials Management Terminology." Section 2. The

The Stress Management in the Enterprise Management System

Directory of Open Access Journals (Sweden)

Kuzmin Oleh Ye.

2017-05-01

Full Text Available The article systematizes the classification of the type of management by a number of attributes: horizon of ambition, priority style of interaction between management and managed systems, level of centralization, orientation, consideration of environmental impact, contents, type of activity, and response to deviation. Within terms of the attribute of response to deviations, place of the stress management is allocated near to the harmonic and the risk management. It has been substantiated that the stress management is the enterprise management system aimed at overcoming unwanted deviations that are significant, extreme, and have a significant negative impact on the operation of enterprise. In the structure of the stress management, the following integral components have been allocated and characterized: crisis, adaptive, reactive, fears, and anticipative.

Optimal Energy Consumption in Refrigeration Systems - Modelling and Non-Convex Optimisation

DEFF Research Database (Denmark)

Hovgaard, Tobias Gybel; Larsen, Lars F. S.; Skovrup, Morten J.

2012-01-01

Supermarket refrigeration consumes substantial amounts of energy. However, due to the thermal capacity of the refrigerated goods, parts of the cooling capacity delivered can be shifted in time without deteriorating the food quality. In this study, we develop a realistic model for the energy...... consumption in super market refrigeration systems. This model is used in a Nonlinear Model Predictive Controller (NMPC) to minimise the energy used by operation of a supermarket refrigeration system. The model is non-convex and we develop a computational efficient algorithm tailored to this problem...

Fuel Consumption and Vehicle Emission Models for Evaluating Environmental Impacts of the ETC System

Directory of Open Access Journals (Sweden)

Jiancheng Weng

2015-07-01

Full Text Available The environmental outcome of the Electronic Toll Collection (ETC system is an important aspect in evaluating the impacts of the ETC system, which is influenced by various factors including the vehicle type, travel speed, traffic volume, and average queue length of Manual Toll Collection (MTC lanes. The primary objective of this paper is to develop a field data-based practical model for evaluating the effects of ETC system on the fuel efficiency and vehicle emission. First, laboratory experiments of seven types of vehicles under various scenarios for toll collection were conducted based on the Vehicle Emissions Testing System (VETS. The indicator calculation models were then established to estimate the comprehensive benefit of ETC system by comparing the test results of MTC lane and ETC lane. Finally, taking Beijing as a case study, the paper calibrated the model parameters, and estimated the monetization value of environmental benefit of the ETC system in terms of vehicle emissions reduction and fuel consumption decrease. The results shows that the applications of ETC system are expected to save fuel consumption of 4.1 million liters and reduce pollution emissions by 730.89 tons in 2013 in Beijing.

Management systems for regulatory authorities

International Nuclear Information System (INIS)

Mpandanyama, Rujeko Lynette

2015-02-01

For a regulatory body to fulfil its statutory obligations, there is need to develop and implement a regulatory management system that has the necessary arrangements for achieving and maintaining high quality performance in regulating the safety of nuclear and radiation facilities under its authority. Hence, the regulatory management system needs to fully integrate the human resources, processes and physical resources of the organization. This study sought to provide an understanding of the concept, principles, policies and fundamentals of management systems as they relate to regulatory systems in the field of radiation protection and to make appropriate recommendations to ensure that an effective management system exists for the control of ionizing radiation and radiation sources and addresses all relevant stakeholders in Zimbabwe. A comparative analysis was done on the current management status and the ideal management system, which led to the identification of the gaps existing. The main key that was found to be of significance was lack of linkages between processes and management tools within the institution. (au)

OCRWM Systems Engineering Management Plan (SEMP)

International Nuclear Information System (INIS)

1990-03-01

The Nuclear Waste Policy Act of 1982 established the Office of Civilian Radioactive Waste Management (OCRWM) in the Department of Energy (DOE) to implement a program for the safe and permanent disposal of spent nuclear fuel and high-level radioactive waste. To achieve this objective, the OCRWM is developing an integrated waste-management system consisting of three elements: the transportation system, the monitored retrievable storage (MRS) facility, and the mined geologic disposal system (MGDS). The development of such a system requires management of many diverse disciplines that are involved in research, siting, design, licensing, and external interactions. The purpose of this Systems Engineering Management Plan (SEMP) is to prescribe how the systems-engineering process will be implemented in the development of the waste-management system. Systems engineering will be used by the OCRWM to manage, integrate, and document all aspects of the technical development of the waste-management system and its system elements to ensure that the requirements of the waste-management program are met. It will be applied to all technical activities of the OCRWM program. It will be used by the OCRWM to specify the sequence of technical activities necessary to define the requirements the waste-management system must satisfy, to develop the waste-management system, to relate system elements to each other, and to determine how the waste-management system can be optimized to most effectively satisfy the requirements. Furthermore, systems engineering will be used in the management of Program activities at the program, program-element, and project levels by specifying procedures, studies, reviews, and documentation requirements. 9 refs., 1 fig

Potential of Computerized Maintenance Management System in Facilities Management

Directory of Open Access Journals (Sweden)

Noor Farisya Azahar

2014-07-01

Full Text Available For some time it has been clear that managing buildings or estates has been carried out in the context of what has become known as facilities management. British Institute of Facilities Management defined facilities management is the integration of multi-disciplinary activities within the built environment and the management of their impact upon people and the workplace. Effective facilities management is vital to the success of an organisation by contributing to the delivery of its strategic and operational objectives. Maintenance of buildings should be given serious attention before (stage design, during and after a building is completed. But total involvement in building maintenance is after the building is completed and during its operations. Residents of and property owners require their building to look attractive, durable and have a peaceful indoor environment and efficient. The objective of the maintenance management system is to stream line the vast maintenance information system to improve the productivity of an industrial plant. a good maintenance management system makes equipment and facilities available. This paper will discuss the fundamental steps of maintenance management program and Computerized Maintenance Management System (CMMS

Analysis of the dynamics of the indicators for daily graphs for consumption of electricity of the USSR energy system

Energy Technology Data Exchange (ETDEWEB)

Nekrasov, A M; Lazarenko, T V; Zlatopol' skiy, A N

1982-01-01

The dynamics for the indicators of daily graphs of consumption of electricity in the USSR is the result of interaction of a large number of different-directed factors. Among them in recent years relatively greater influence has come from a change in the structure of consumers of each unified energy system and especially the USSR energy system with the unified energy systems with inclusion in it of large unified energy systems, whose time is shifted on time zones, and intensification of electrical bonds between the unified energy systems. The factor of expansion of the USSR energy system on the territory of the country because of the inclusion of new unified energy systems resulted in condensation of the daily graphs for consumption of electricity of the USSR energy system: increase in the coefficient of filling the daily graphs, their peak and semipeak parts, as well as coefficient of minimum consumption. Taking into consideration the program for further development of the country presented in the main trends for economic and social development of the USSR for 1981-1985 and for the period up to the year 1990, for the current and the near five-year plan, one can expect preservation of the revealed trends for dynamics of the indicators of the daily graphs for electricity consumption of the USSR energy system.

Residential Consumption Scheduling Based on Dynamic User Profiling

Science.gov (United States)

Mangiatordi, Federica; Pallotti, Emiliano; Del Vecchio, Paolo; Capodiferro, Licia

Deployment of household appliances and of electric vehicles raises the electricity demand in the residential areas and the impact of the building's electrical power. The variations of electricity consumption across the day, may affect both the design of the electrical generation facilities and the electricity bill, mainly when a dynamic pricing is applied. This paper focuses on an energy management system able to control the day-ahead electricity demand in a residential area, taking into account both the variability of the energy production costs and the profiling of the users. The user's behavior is dynamically profiled on the basis of the tasks performed during the previous days and of the tasks foreseen for the current day. Depending on the size and on the flexibility in time of the user tasks, home inhabitants are grouped in, one over N, energy profiles, using a k-means algorithm. For a fixed energy generation cost, each energy profile is associated to a different hourly energy cost. The goal is to identify any bad user profile and to make it pay a highest bill. A bad profile example is when a user applies a lot of consumption tasks and low flexibility in task reallocation time. The proposed energy management system automatically schedules the tasks, solving a multi-objective optimization problem based on an MPSO strategy. The goals, when identifying bad users profiles, are to reduce the peak to average ratio in energy demand, and to minimize the energy costs, promoting virtuous behaviors.

Multi-year consumption analysis and innovative energy perspectives: The case study of Leonardo da Vinci International Airport of Rome

International Nuclear Information System (INIS)

Rubeis, Tullio de; Nardi, Iole; Paoletti, Domenica; Di Leonardo, Antonella; Ambrosini, Dario; Poli, Ruggero; Sfarra, Stefano

2016-01-01

Highlights: • A systematic approach for energy management of complex structures is proposed. • Technological systems of Leonardo da Vinci Airport of Rome are described. • A multi-year consumption analysis highlights the most energy-consuming sectors. • The “Smart Grid” prototype project inherent to T1 Terminal is presented. • Wind and photovoltaic plants are designed and discussed to test the smart storage. - Abstract: Because of the growing need for efficient energy production systems, energy policies promoted in recent years have also involved complex structures, like airports. This paper proposes the implementation of an energy management system for a very energy-consuming structure, composed of different power plants and many energy consumers: the Leonardo da Vinci International Airport of Rome. In this study, the examination of historical data related to airport electric power, thermal energy and fuel consumption is discussed, starting with the analysis of the production energy plants, mainly based on a combined heat and power system. Furthermore, pioneering solutions are proposed, not only to cover airport energy requirements, but also to test the safety and reliability of innovative load management systems. For this reason, the choice of the Leonardo da Vinci management company, oriented to install a smart storage in order to manage the bidirectional energy flows by consumers and producers, is justified. Such innovative energy procurement systems are examined, with the goal of achieving greater penetration of renewable sources: mini and micro wind power plants and high concentrator photovoltaic plants.

Economic energy distribution and consumption in a microgrid Part 2

DEFF Research Database (Denmark)

Tahersima, Fatemeh; Stoustrup, Jakob; Andersen, Palle

2014-01-01

Energy management of a small scale electrical microgrid is investigated. The microgrid comprises residential houses with local renewable generation, consumption and storage units. The microgrid has the possibility of connection to the electricity grid as well to compensate energy decit of local...... power producers. The nal objective is to full the microgrid's energy demands mainly from the local electricity producers. The other objective is to manage power consumption such that the consumption cost is minimum for individual households. In this study, a hierarchical controller composed of three...... levels is proposed. Each layer from bottom to top focus on individual energy consuming units, individual buildings, and the microgrid respectively. At the middle layer, a model predictive controller is formulated to schedule the building's energy consumption using potential load exibilities. The top...

Configuration Management Program - a part of Integrated Management System

International Nuclear Information System (INIS)

Mancev, Bogomil; Yordanova, Vanja; Nenkova, Boyka

2014-01-01

The recently issued International Atomic Energy Agency (IAEA) publications (GS-R-3, GS-G-3.1 and GS-G-3.5) regarding Management Systems for Facilities and Activities define requirements for creation, introduction, evaluation and continuously improvement of the Management System, which unifies the safety, health, environment, security, quality and economic elements. According to GS-R-3 the Integrated Management System is based on defined processes identified in the enterprises: Managing, Basic and Supporting processes. At implementation of their activities, the organizations often apply other standards in their interrelations with suppliers and the parties concerned - ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007, regarding quality, environment and occupational health and safety management. The integration of the standards of both series ensure the observance of the common management principles that reflect the best practices of management as leadership, participation of the people, process approach, continuously improvement, systematical approach to the management and approach based on facts used at the making decisions. The main objective of the Integrated Management System introduction is to ensure safety considering the influence of all additional impacts taken together. The Integrated Management System is based on the process approach at implementation of the activities in nuclear power plant. The transition to the process oriented approach require long period of time, during which the distribution of the responsibilities is optimized up to the level that will satisfy the requirements, reach and maintain the stipulated objectives. The Configuration Management (CM) is an integrated management process by means of which conformity between design requirements, physical configuration and the plant documentation is ascertained and maintained during the entire life cycle of the facility. Processes within configuration management are not isolated, but are part of

Energy Management Strategy for Micro-Grids with PV-Battery Systems and Electric Vehicles

Directory of Open Access Journals (Sweden)

Jose Luis Torres-Moreno

2018-02-01

Full Text Available This paper analyzes the impact of photovoltaic (PV systems on storage and electric vehicles in micro-grids. As these kinds of systems are becoming increasingly popular in the residential sector, the development of a new generation of equipment, such as more efficient batteries or solar panels, makes further study necessary. These systems are especially interesting in commercial or office buildings, since they have a more repetitive daily pattern of electricity consumption, which usually occurs within the maximum solar radiation hours. Based on this need, a novel control strategy aimed at efficiently managing this kind of micro-grid is proposed. The core of this strategy is a rule-based controller managing the power flows between the grid and the batteries of both the PV system and the electric vehicle. Through experimental data and simulations, this strategy was tested under different scenarios. The selected testbed consisted of the laboratory of a research center, which could be easily scalable to the entire building. Results showed the benefits of using an electric vehicle as an active agent in energy balance, leading to a reduction of the energetic costs of a micro-grid.

14 CFR 1212.704 - System manager.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false System manager. 1212.704 Section 1212.704... Authority and Responsibilities § 1212.704 System manager. (a) Each system manager is responsible for the following with regard to the system of records over which the system manager has cognizance: (1) Overall...

The effects of perioperative pain management techniques on food consumption and body weight after laparotomy in rats.

Science.gov (United States)

Shavit, Yehuda; Fish, Gila; Wolf, Gilly; Mayburd, Eduard; Meerson, Ylia; Yirmiya, Raz; Beilin, Benzion

2005-10-01

We examined the effects of two perioperative pain management techniques on recovery after laparotomy, as assessed by body weight (BW) and food consumption (FC). All rats received a preoperative intrathecal mixture of morphine plus bupivacaine combined with one of two treatments: (a) injection of slow-release morphine at the end of the surgery or (b) an antiinflammatory drug, interleukin-1 receptor antagonist (IL-1ra), combined with the preoperative mixture. Laparotomy significantly decreased FC and BW. Both analgesic treatments resulted in a faster recovery of FC and BW. This beneficial effect was more pronounced in the group receiving preoperative analgesics combined with IL-1ra. Effective perioperative pain management can improve postoperative recovery. We studied the effects of two preoperative pain management techniques on recovery after laparotomy in rats. Both analgesic treatments resulted in a faster recovery, especially preoperative analgesics combined with interleukin-1 receptor antagonist.

Remote control and load management of electric power distribution networks; Fjaerroevervakning och belastningsstyrning av eldistributionsnaet

Energy Technology Data Exchange (ETDEWEB)

Jonsson, Mats; Larsson, Mikael

1993-02-01

Remote control and load management increase the electricity distributors possibilities to even out the consumption of electricity for optimal usage of electricity subscription and supply system. Controlling can be done either through technology or through encouragement of off-peak consumption. There are a number of similar systems for controlling consumption, where the manufacturers have chosen different ways to solve the main problem, namely the communication. We have concentrated in examining systems which communicate through the supply system, different types of telephone connections and wireless communication links. In the future demands for better electricity consumption control will be put forward. This will bring along a greater need at distribution level for continuous monitoring of purchased and used electricity flow. The distributors will also need better possibilities to directly affect power consumption. Those manufacturers who do not use load management today should acquire experience through provincial installations in suitable areas with equipment ready for tomorrows needs and requirements. Today there are some different systems on the market that offer flexibility and ready-to-use possibilities. (3 refs., 17 figs.)

Osteoimmunology: Influence of the Immune System on Bone Regeneration and Consumption.

Science.gov (United States)

Limmer, Andreas; Wirtz, Dieter C

2017-06-01

Background Stimulating bone regeneration is a central aim in orthopaedic and trauma surgery. Although the replacement of bone with artificial materials like cement or apatite helps to keep up bone stability, new bone often cannot be regenerated. Increasing research efforts have led to the clinical application of growth factors stimulating bone growth (e.g. bone morphogenic protein, BMP) and inhibitors preventing bone consumption (e.g. RANKL blocking antibodies). These factors mostly concentrate on stimulating osteoblast or preventing osteoclast activity. Current Situation It is widely accepted that osteoblasts and osteoclasts are central players in bone regeneration. This concept assumes that osteoblasts are responsible for bone growth while osteoclasts cause bone consumption by secreting matrix-degrading enzymes such as cathepsin K and matrix metalloproteinases (MMP). However, according to new research results, bone growth or consumption are not regulated by single cell types. It is rather the interaction of various cell types that regulates bone metabolism. While factors secreted by osteoblasts are essential for osteoclast differentiation and activation, factors secreted by activated osteoclasts are essential for osteoblast activity. In addition, recent research results imply that the influence of the immune system on bone metabolism has long been neglected. Factors secreted by macrophages or T cells strongly influence bone growth or degradation, depending on the bone microenvironment. Infections, sterile inflammation or tumour metastases not only affect bone cells directly, but also influence immune cells such as T cells indirectly. Furthermore, immune cells and bone are mechanistically regulated by similar factors such as cytokines, chemokines and transcription factors, suggesting that the definition of bone and immune cells has to be thought over. Outlook Bone and the immune system are regulated by similar mechanisms. These newly identified similarities

Reducing the energy consumption and CO2 emissions of energy intensive industries through decision support systems – An example of application to the steel industry

International Nuclear Information System (INIS)

Porzio, Giacomo Filippo; Fornai, Barbara; Amato, Alessandro; Matarese, Nicola; Vannucci, Marco; Chiappelli, Lisa; Colla, Valentina

2013-01-01

Highlights: • We describe an application of decision-support system to iron and steel industries. • The realised tool is useful in monitoring energy and CO 2 performances of the plant. • Key processes are modelled through flowsheeting approach and included in the tool. • A mathematical optimisation model for the process gas management has been realised. • Implementation of the tool can help reducing plant costs and environmental impact. - Abstract: The management of process industries is becoming in the recent years more and more challenging, given the stringent environmental policies as well as raising energy costs and the always-present drive for profit. A way to help plant decision makers in their daily choices is to refer to decision-support tools, which can give advice on the best practices on how to operate a plant in order to reduce the energy consumption and the CO 2 emissions keeping at the same time the costs under control. Such an approach can be useful in a variety of industries, particularly the most energy-intensive ones such as iron and steel industries. In this paper, an approach to the realisation of a software system, which allows to generate internal reports on the plant performances, as well as to simulate the plant behaviour in different scenarios, is described. The main production processes (coke plant, blast furnace, steel shop, hot rolling mill) are described and simulated focusing on the prediction of products flow rates and composition, energy consumption and GHGs (Greenhouse Gases) emissions in different operating conditions. The importance of a correct management of the CO 2 within the plant is underlined, particularly with regard to the new EU Emission Trading System, which will be based on European benchmarks. The software tool is illustrated and a case study is included, which focuses on the simultaneous minimisation of the CO 2 emissions and maximisation of the profit through an optimised management of the by-product gases

Program management system manual

International Nuclear Information System (INIS)

1989-08-01

OCRWM has developed a program management system (PMS) to assist in organizing, planning, directing and controlling the Civilian Radioactive Waste Management Program. A well defined management system is necessary because: (1) the Program is a complex technical undertaking with a large number of participants, (2) the disposal and storage facilities to be developed by the Program must be licensed by the Nuclear Regulatory Commission (NRC) and hence are subject to rigorous quality assurance (QA) requirements, (3) the legislation mandating the Program creates a dichotomy between demanding schedules of performance and a requirement for close and continuous consultation and cooperation with external entities, (4) the various elements of the Program must be managed as parts of an integrated waste management system, (5) the Program has an estimated total system life cycle cost of over $30 billion, and (6) the Program has a unique fiduciary responsibility to the owners and generators of the nuclear waste for controlling costs and minimizing the user fees paid into the Nuclear Waste Fund. This PMS Manual is designed and structured to facilitate strong, effective Program management by providing policies and requirements for organizing, planning, directing and controlling the major Program functions

Quantitative measurement and visualization of biofilm O 2 consumption rates in membrane filtration systems

KAUST Repository

Prest, Emmanuelle I E C

2012-03-01

There is a strong need for techniques enabling direct assessment of biological activity of biofouling in membrane filtration systems. Here we present a new quantitative and non-destructive method for mapping O 2 dynamics in biofilms during biofouling studies in membrane fouling simulators (MFS). Transparent planar O 2 optodes in combination with a luminescence lifetime imaging system were used to map the two-dimensional distribution of O 2 concentrations and consumption rates inside the MFS. The O 2 distribution was indicative for biofilm development. Biofilm activity was characterized by imaging of O 2 consumption rates, where low and high activity areas could be clearly distinguished. The spatial development of O 2 consumption rates, flow channels and stagnant areas could be determined. This can be used for studies on concentration polarization, i.e. salt accumulation at the membrane surface resulting in increased salt passage and reduced water flux. The new optode-based O 2 imaging technique applied to MFS allows non-destructive and spatially resolved quantitative biological activity measurements (BAM) for on-site biofouling diagnosis and laboratory studies. The following set of complementary tools is now available to study development and control of biofouling in membrane systems: (i) MFS, (ii) sensitive pressure drop measurement, (iii) magnetic resonance imaging, (iv) numerical modelling, and (v) biological activity measurement based on O 2 imaging methodology. © 2011 Elsevier B.V.

Development of mechanical ventilation system with low energy consumption for renovation of buildings

DEFF Research Database (Denmark)

Terkildsen, Søren

in reducing CO2-emmissions. Over the last decade, initiatives have been taken to reduce its energy consumption e.g. by the European Union, national governments or NGOs. The initiatives have mostly focused on improving the thermal properties of the building envelope to reduce heat losses. Building services......A general reduction in total energy consumption is needed, due to the increasing concerns about climate change caused by CO2-emmissions from fossil fuels. In 2004, the building sector accounted for 40% of the total energy consumption in the EU and the US and therefore must play a crucial role....... The goal was to develop a mechanical system with an SFP-value of 0.5 kJ/m3 and a heat recovery efficiency of 85% that can meet current indoor environment requirements without discomfort in terms of thermal, acoustic and draught issues. The concept was developed for a temperate climate, such as Denmark...

Ways to integrate document management systems with industrial plant configuration management systems

International Nuclear Information System (INIS)

Munoz, M.

1995-01-01

Based on experience gained from tasks carried out for Almaraz Nuclear Power Plant, this paper describes computer platforms used both at the power plant and in the main offices of the engineering company. Subsequently, a description is given of the procedure followed for the continuous up-dating of plant documentation, in order to maintain consistency with other information stored in data bases in the Operation Management System, Maintenance System, Modification Management System, etc. The work method used for the unitary updating of all information (document images and attributes corresponding to the different data bases), following refuelling procedures is also described. Lastly, the paper describes the functions and the user interface of the system used in the power plant for document management. (Author)

Management Information Systems at CERN

CERN Document Server

Ferguson, J

1986-01-01

The specific areas addressed in the study are 1.Management decision support (data presentation, data base management systems â" DBMS, modeling) 2.Text processing, 3.Electronic communication for management purposes, 4.Office automation, 5.Administrative use of Management Information Systems (MIS) and in particular Administrative Data Processing (ADP).

Design and optimization of zero-energy-consumption based solar energy residential building systems

Science.gov (United States)

Zheng, D. L.; Yu, L. J.; Tan, H. W.

2017-11-01

Energy consumption of residential buildings has grown fast in recent years, thus raising a challenge on zero energy residential building (ZERB) systems, which aim at substantially reducing energy consumption of residential buildings. Thus, how to facilitate ZERB has become a hot but difficult topic. In the paper, we put forward the overall design principle of ZERB based on analysis of the systems’ energy demand. In particular, the architecture for both schematic design and passive technology is optimized and both energy simulation analysis and energy balancing analysis are implemented, followed by committing the selection of high-efficiency appliance and renewable energy sources for ZERB residential building. In addition, Chinese classical residential building has been investigated in the proposed case, in which several critical aspects such as building optimization, passive design, PV panel and HVAC system integrated with solar water heater, Phase change materials, natural ventilation, etc., have been taken into consideration.

Development of a management protocol for the reduction of fuel consumption and decreasing of the emanations of CO2 as contaminant of environment in air service companies

International Nuclear Information System (INIS)

Montoya Maroto, Manuel

2012-01-01

A management protocol is developed for air services companies to improve the eco-efficiency of its processes. The application of operational procedures have allowed the reduction of fuel consumption and decreased the emanations of CO 2 into the environment. The methodology of the research has consisted in quantitative and qualitative analysis of the variables and processes that have influenced significantly in the operation of airline fleet. An integral analysis is realized of the procedures of management and use of resources in the cockpits of the aircraft (Cockpit Resource Management) and navigation based in performance (NBP). The results of analysis are used to elaborate a protocol to minimize the fuel consumption and energy through the application of practices and operational procedures more efficient and safe. The environmental burdens associated with the services that are provided in the airline industry are minimized. The application of methods of improvement and procedures that are updated continuously have achieved the sustainability of the protocol. The operational procedures are applied to decrease the fuel consumption. Sensitization programs are developed for the utilization of more efficient operational practices and friendly with the environment. An incentive program is implemented to optimize the fuel consumption safely by pilots. A new procedure of flight scheduling is modified based on performance of the pilots and fleet degradation factors, assigning the pilots who have had higher consumption to airplanes with lower degradation, and the pilots who have had lower consumption, to airplanes with higher degradation. A self-liquidating incentive plan is developed based on the savings achieved in the operation in high-performance, could reinforce the change of attitude necessary for the group of pilots can support the implementation of the protocol [es

The study of thermal processes in control systems of heat consumption of buildings

Science.gov (United States)

Tsynaeva, E.; A, Tsynaeva

2017-11-01

The article discusses the main thermal processes in the automated control systems for heat consumption (ACSHC) of buildings, schematic diagrams of these systems, mathematical models used for description of thermal processes in ACSHC. Conducted verification represented by mathematical models. It was found that the efficiency of the operation of ACSHC depend from the external and internal factors. Numerical study of dynamic modes of operation of ACSHC.

Disaster Management: AN Integral Part of Science & Technology System and Land Administration-Management System

Science.gov (United States)

Ghawana, T.; Zlatanova, S.

2016-06-01

Disaster management is a multidisciplinary field, which requires a general coordination approach as well as specialist approaches. Science and Technology system of a country allows to create policies and execution of technical inputs required which provide services for the specific types of disasters management. Land administration and management agencies, as the administrative and management bodies, focus more on the coordination of designated tasks to various agencies responsible for their dedicated roles. They get help from Scientific and technical inputs & policies which require to be implemented in a professional manner. The paper provides an example of such integration from India where these two systems complement each other with their dedicated services. Delhi, the Capital of India, has such a disaster management system which has lot of technical departments of government which are mandated to provide their services as Emergency Service Functionaries. Thus, it is shown that disaster management is a job which is an integral part of Science & Technology system of a country while being implemented primarily with the help of land administration and management agencies. It is required that new policies or mandates for the Science and technology organizations of government should give a primary space to disaster management

Integration of project management and systems engineering: Tools for a total-cycle environmental management system

International Nuclear Information System (INIS)

Blacker, P.B.; Winston, R.

1997-01-01

An expedited environmental management process has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL). This process is one result of the Lockheed Martin commitment to the US Department of Energy to incorporate proven systems engineering practices with project management and program controls practices at the INEEL. Lockheed Martin uses a graded approach of its management, operations, and systems activities to tailor the level of control to the needs of the individual projects. The Lockheed Martin definition of systems engineering is: ''''Systems Engineering is a proven discipline that defines and manages program requirements, controls risk, ensures program efficiency, supports informed decision making, and verifies that products and services meet customer needs.'''' This paper discusses: the need for an expedited environmental management process; how the system was developed; what the system is; what the system does; and an overview of key components of the process

CIMS: The Cartographic Information Management System,

Science.gov (United States)

1981-01-01

use. Large-scale information systems may cover large amounts of information such as the Land Identification and Information Management System (LIMS...small computer in managing the information holdings of a mapping institute. The result is the Cartographic Information Management System (CIMS), a...American countrie.s. 1 .- - _ _ _ _. = _ m m m THE CARTOGRAPHIC INFORMATION MANAGEMENT SYSTEM System Rationale Interactive computer-assisted cartography

Application of an energy management system in combination with FMCS to high energy consuming IT industries of Taiwan

International Nuclear Information System (INIS)

Lee, Shin-Ku; Teng, Min-Cheng; Fan, Kuo-Shun; Yang, Kuan-Hsiung; Horng, Richard S.

2011-01-01

Research highlights: → A new FMCS architecture with an energy management system was developed. → The new coupling system was demonstrated feasible during in situ experiments. → A survey found that HVAC is the most energy intensive system in IT industries. → A 9.6% chiller efficiency increase and total 23.2% annual energy saving were reached. - Abstract: A commissioning unit with an energy management system (EMS) was developed to be used together with facility monitoring and control systems (FMCS). This paper describes the testing of the new coupling system, in which a detailed management program is embedded for real time control decision making. First, a survey was conducted to evaluate the current power consumption of the facility systems, and found that HVAC is the most energy intensive system. Then a case study was performed, while the plant was in operation, to demonstrate the feasibility of the new coupling system, and a 9.6% chiller efficiency increase and total 23.2% annual energy saving for the chillers were reached, by optimizing the part load ratio condition of chillers and pumps. The results from in situ experiments show that applying this energy management system to the IT industry is feasible. A better custom-made FMCS with EMS, and full scale testing to greatly increase the overall energy efficiency, is recommended.

Energy management in Lucknow city

International Nuclear Information System (INIS)

Zia, Hina; Devadas, V.

2007-01-01

In this paper, an attempt is made to prepare an energy management model for Lucknow city along with policy recommendations for optimal energy utilization and management. At the outset, the authors have reviewed the related literature on energy management in the urban system. The entire collected literature is divided into the following sections, such as, energy resource assessment, energy consumption, energy and economy, energy and environment, energy and transportation, forecasting the energy demand and supply, alternate energy sources and technologies, energy conservation and demand-side management and energy management measures in India, and are reviewed thoroughly and presented. Subsequently, an attempt is made to establish the importance of energy in urban development by using Systems concept. Lucknow city has been chosen for investigation in this study. A detailed methodology is developed for organizing the survey at the grassroots level to evolve feasible strategies for optimal energy management in the study area. An attempt is further made to assess the available energy resource in the city, and the energy consumption by source wise in the city and estimating the energy gap in the year 2011. The paper concludes with preparation of a detailed energy management model for Lucknow city to reduce the expected energy gap for the year 2011. The recommendations are made for supply augmentation, demand-side management and policy measures to be taken by the government authorities

Lithium battery management system

Science.gov (United States)

Dougherty, Thomas J [Waukesha, WI

2012-05-08

Provided is a system for managing a lithium battery system having a plurality of cells. The battery system comprises a variable-resistance element electrically connected to a cell and located proximate a portion of the cell; and a device for determining, utilizing the variable-resistance element, whether the temperature of the cell has exceeded a predetermined threshold. A method of managing the temperature of a lithium battery system is also included.

Web Based Project Management System

OpenAIRE

Aadamsoo, Anne-Mai

2010-01-01

To increase an efficiency of a product, nowadays many web development companies are using different project management systems. A company may run a number of projects at a time, and requires input from a number of individuals, or teams for a multi level development plan, whereby a good project management system is needed. Project management systems represent a rapidly growing technology in IT industry. As the number of users, who utilize project management applications continues to grow, w...

Spatio-temporal estimation of consumptive water use for assessment of irrigation system performance and management of water resources in irrigated Indus Basin, Pakistan

Science.gov (United States)

Usman, M.; Liedl, R.; Awan, U. K.

2015-06-01

Reallocation of water resources in any irrigation scheme is only possible by detailed assessment of current irrigation performance. The performance of the Lower Chenab Canal (LCC) irrigation system in Pakistan was evaluated at large spatial and temporal scales. Evaporative Fraction (EF) representing the key element to assess the three very important performance indicators of equity, adequacy and reliability, was determined by the Surface Energy Balance Algorithm (SEBAL) using Moderate Resolution Imaging Spectroradiometer (MODIS) images. Spatially based estimations were performed at irrigation subdivisions, lower and upper LCC and, whole LCC scales, while temporal scales covered months, seasons and years for the study period from 2005 to 2012. Differences in consumptive water use between upper and lower LCC were estimated for different crops and possible water saving options were explored. The assessment of equitable water distribution indicates smaller coefficients of variation and hence less inequity within each subdivision except Sagar (0.08) and Bhagat (0.10). Both adequacy and reliability of water resources are found lower during kharif as compared to rabi with variation from head to tail reaches. Reliability is quite low from July to September and in February/March. This is mainly attributed to seasonal rainfalls. Average consumptive water use estimations indicate almost doubled water use (546 mm) in kharif as compared to (274 mm) in rabi with significant variability for different cropping years. Crop specific consumptive water use reveals rice and sugarcane as major water consumers with average values of 593 mm and 580 mm, respectively, for upper and lower LCC, followed by cotton and kharif fodder. The water uses for cotton are 555 mm and 528 mm. For kharif fodder, corresponding values are 525 mm and 494 mm for both regions. Based on the differences in consumptive water use, different land use land cover change scenarios were evaluated with regard to savings

A novel multimode hybrid energy storage system and its energy management strategy for electric vehicles

Science.gov (United States)

Wang, Bin; Xu, Jun; Cao, Binggang; Zhou, Xuan

2015-05-01

This paper proposes a novel topology of multimode hybrid energy storage system (HESS) and its energy management strategy for electric vehicles (EVs). Compared to the conventional HESS, the proposed multimode HESS has more operating modes and thus it could in further enhance the efficiency of the system. The rule-based control strategy and the power-balancing strategy are developed for the energy management strategy to realize mode selection and power distribution. Generally, the DC-DC converter will operate at peak efficiency to convey the energy from the batteries to the UCs. Otherwise, the pure battery mode or the pure ultracapacitors (UCs) mode will be utilized without the DC-DC converter. To extend the battery life, the UCs have the highest priority to recycle the energy and the batteries are isolated from being recharged directly during regenerative braking. Simulations and experiments are established to validate the proposed multimode HESS and its energy management strategy. The results reveal that the energy losses in the DC-DC converter, the total energy consumption and the overall system efficiency of the proposed multimode HESS are improved compared to the conventional HESS.