WorldWideScience

Sample records for consuming buildings rework

  1. Analysis of Cost of Rework on Time and Cost Performance of Building Construction Projects in Abuja, Nigeria

    Directory of Open Access Journals (Sweden)

    Emmanuel Chidiebere Eze

    2018-01-01

    Full Text Available Rework is a menace that leads to undesired and unnecessary loss of efforts, it degrades project cost and schedule performance of construction projects, both at design and construction phases. This study therefore, analyzed the impact of cost of rework on time and cost performance of building construction projects in Nigerian, using selected commercial building project within the country’s capital. A pro forma was adopted for gathering data on rework cost, project cost and time of selected building projects, while structured questionnaire was used to collect information on the likely measures for reducing rework incidences from construction professionals that were involved in the delivery of the identified projects. Regression analysis, relative importance index and Kruskal-Walis test were employed for data analysis. The study revealed a significant relationship between the cost of rework and initial and final project cost of delivering commercial buildings, as an average of 3.53% impact on the initial project cost, 46.60% contribution to cost overrun, and p-value of 0.000 was observed on all assessed projects. For the project delivery time, a significant relationship between the cost of rework and initial and final project duration, as an average of 7.35% impact on the initial delivery time, extra 19 days and p-value of 0.000 was observed on all assessed projects. Team building and education, management commitment, employee involvement, were some of the best possible measures to minimized rework problems.

  2. Energy transition and security: which voluntary codes? Energy efficiency: IEA, IEC and ISO dialogue. The European Commission's safety, solidarity and efficiency measures. Securing natural gas supplies and favoring cogeneration. Less energy consuming buildings: rework of the energy efficiency directive. Energy efficiency inside buildings: GDF Suez report

    International Nuclear Information System (INIS)

    Tourneur, J.C.

    2009-01-01

    This dossier gathers a series of short articles about energy security and efficiency in a context of policy transition. The first paper deals with the use of international standards to promote energy efficiency thanks to efficient public policies and private sector actions. This was the main topic of the mixed workshop organized by the International electrotechnics Commission (IEC) in spring 2009. The second paper presents the new strategic analysis of the European commission in the domain of energy which stresses on the '20-20-20' climate change proposals approved in December 2008. A new European action plan for energy security and solidarity defines 5 domains requiring an extra action to warrant a sustainable energy supply. The commission is also examining the challenges that Europe will have to face between 2020 and 2050. The third article treats of the security of natural gas supplies which represents a quarter of the European Union (EU) energy mix. The supply crises susceptible to occur may have serious economic and social consequences. Therefore, the EU must be prepared to warrant its security of supplies. Cogeneration allows the EU to stay close to its energy goals. Buildings play a key role in the realisation of the EU's energy saving objectives and fight against climate change. The new directive on buildings energy efficiency (2002/91/CE) will allow to exploit this potential of saving and to stimulate sustainable investment and employment as well. Finally, the publication of the second WBCSD (World business council for sustainable development) international report on buildings energy efficiency has led GDF Suez utility to reaffirm its commitment in favour of energy saving and efficiency. (J.S.)

  3. Consumer Central Energy Flexibility in Office Buildings

    DEFF Research Database (Denmark)

    Billanes, Joy Dalmacio; Ma, Zheng; Jørgensen, Bo Nørregaard

    2017-01-01

    Energy flexibility in buildings will play an important role in the smart energy system. Office buildings have more potentials to provide energy flexibility to the grid compared to other types of buildings, due to the existing building management, control systems and large energy consumption....... Consumers in office buildings (building owners/managers and occupants) take a main role for adopting and engaging in building energy flexibility. In this paper provides a systematic review of consumer central energy flexibility in office buildings with the discussion of social, technical and business...... can boost energy flexibility in the office buildings....

  4. Consumer behavior in buildings; Nutzverhalten in Gebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The more exact building automation devices have to be designed, the more important is the knowledge about the utilization of the building. It could happen that the state of this devices could be disordered in case of unforseen consumer behavior taking not into account by designing. Therefore in practice limits must be extended because of unknown consumer behavior. On the meeting specialists reported on methods and experiences, how consumer behavior can be influenced in different types of buildings. They mentioned the simulation and the influence of this behavior involving the building automation. Contributions on legal aspects as examples from practice complete the proceeding volume. [German] Je exakter gebaeudetechnische Anlagen dimensioniert werden sollen, um so wichtiger ist die Kenntnis ueber die spaetere Nutzung des Gebaeudes. Es besteht die Gefahr, dass durch unvorhersehbares Verhalten der Nutzer Anlagenzustaende erreicht werden, die bei der Bemessung nicht beruecksichtigt wurden. Deshalb werden in der Praxis bei der Auslegung von TGA-Anlagen oft Zuschlaege wegen unbekanntem Nutzerverhalten eingeraeumt. Auf der Tagung berichteten die Referenten ueber Methoden und Erfahrungen, wie sich das Nutzerverhalten in unterschiedlichen Gebaeudetypen beeinflussen laesst. Sie gingen hierzu auf die Simulation und den Einfluss dieses Verhaltens auf die Gebaeudetechnik ein. Vortraege ueber gesetzliche Rahmenbedingungen sowie Beispiele aus der Praxis schlossen sich an. (orig.)

  5. Resilience and reworking practices

    DEFF Research Database (Denmark)

    Hauge, Mads Martinus; Fold, Niels

    2016-01-01

    of this article is to shed light on the agency of individual workers involved in rapid industrialization processes. In this endeavor we draw inspiration from recent contributions that have integrated Cindi Katz's threefold categorization of agency as reworking, resilience and resistance. In combination...... the labor market. The empirical part of the article draws on interviews with local and migrant first-generation workers in two settlements located next to an industrial zone in Can Tho Province in the Mekong River Delta Region of Vietnam. It is suggested that the alternating practices of reworking...

  6. Evaluasi Pengerjaan Ulang (Rework) Pada Proyek Konstruksi Gedung Di Semarang

    OpenAIRE

    Herdianto, Ardhan; Tanjungsari, Ayunda Dewi Ratih; Hidayat, Arif; Hatmoko, Jati Utomo Dwi

    2015-01-01

    Reworks on construction projects caused by errors in planning, working procedure errors, lack of supervision makes the results of work are not in accordance with the initial design and the construction. They can result in some of loss, such as cost, time, quality of work, and a decreased motivation. This study intends to evaluate the rework on the building construction project in Semarang with the aim to identifying the causative factor of rework, to knowing the magnitude of the risk and the ...

  7. BUILDING BRANDING BASED ON CONSUMER RESEARCH

    Directory of Open Access Journals (Sweden)

    Igor BELOSTECINIC

    2017-06-01

    Full Text Available This article is dedicated to the modern branding,which builds brand management in close relation to current customer behavior trends on the market. The subject is relevant, since the practice shows that only adequate brand management can lead to the increase of companies’ brand capital, their development and income growth.The thesis analyses the use of modern market research methods.

  8. Energy transition and security: which voluntary codes? Energy efficiency: IEA, IEC and ISO dialogue. The European Commission's safety, solidarity and efficiency measures. Securing natural gas supplies and favoring cogeneration. Less energy consuming buildings: rework of the energy efficiency directive. Energy efficiency inside buildings: GDF Suez report; Transition et securite energetiques: quels codes volontaires? Efficacite energetique: dialogue AIE, CEI et ISO. Les mesures de securite, solidarite et efficacite de la commission europeenne. Securiser l'approvisionnement en gaz naturel et favoriser la cogeneration. Des batiments moins gourmands en energie: refonte de la directive sur la performance energetique. Efficacite energetique dans les batiments: GDF Suez au rapport (volontaire)

    Energy Technology Data Exchange (ETDEWEB)

    Tourneur, J.C

    2009-10-15

    This dossier gathers a series of short articles about energy security and efficiency in a context of policy transition. The first paper deals with the use of international standards to promote energy efficiency thanks to efficient public policies and private sector actions. This was the main topic of the mixed workshop organized by the International electrotechnics Commission (IEC) in spring 2009. The second paper presents the new strategic analysis of the European commission in the domain of energy which stresses on the '20-20-20' climate change proposals approved in December 2008. A new European action plan for energy security and solidarity defines 5 domains requiring an extra action to warrant a sustainable energy supply. The commission is also examining the challenges that Europe will have to face between 2020 and 2050. The third article treats of the security of natural gas supplies which represents a quarter of the European Union (EU) energy mix. The supply crises susceptible to occur may have serious economic and social consequences. Therefore, the EU must be prepared to warrant its security of supplies. Cogeneration allows the EU to stay close to its energy goals. Buildings play a key role in the realisation of the EU's energy saving objectives and fight against climate change. The new directive on buildings energy efficiency (2002/91/CE) will allow to exploit this potential of saving and to stimulate sustainable investment and employment as well. Finally, the publication of the second WBCSD (World business council for sustainable development) international report on buildings energy efficiency has led GDF Suez utility to reaffirm its commitment in favour of energy saving and efficiency. (J.S.)

  9. 7 CFR 29.2293 - Rework.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Rework. 29.2293 Section 29.2293 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Official Standard Grades for Virginia Fire-Cured Tobacco (u.s. Type 21) § 29.2293 Rework...

  10. 7 CFR 29.2545 - Rework.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Rework. 29.2545 Section 29.2545 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...-Cured Tobacco (u.s. Types 22, 23, and Foreign Type 96) § 29.2545 Rework. Any lot of Types 22 and 23...

  11. Improved availability through reduction in rework

    International Nuclear Information System (INIS)

    Grosswald, M.; Lowman, J.

    1985-01-01

    The Florida Power and Light Company Quality Improvement Rework Identification Program is discussed. Establishment of the Quality Improvement Rework Identification Task Team, goals, and methods of the program are noted. Resulting from the program are reductions in failure frequency and positive incentives from a teamwork approach

  12. 7 CFR 29.3053 - Rework.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Rework. 29.3053 Section 29.3053 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Rework. Any lot of Type 31 tobacco which needs to be restored or otherwise rearranged to prepare it...

  13. 7 CFR 29.3542 - Rework.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Rework. 29.3542 Section 29.3542 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3542 Rework. Any lot of Types 35, 36, and 37 tobacco which needs to be resorted or...

  14. Building sustainable supply chains: consumer choice or direct management?

    Energy Technology Data Exchange (ETDEWEB)

    Hebditch, David; Blackmore, Emma

    2012-06-15

    Putting a 'carbon label' on products to show how much carbon dioxide is emitted during their production, transport and disposal has been heralded as a powerful route to sustainability within companies' supply chains. Several leading firms have joined the Carbon Trust carbon labelling scheme over the past five years, including UK-based retail giant Tesco, which as early as 2007 promised to use carbon labels on all its products. But earlier this year, the multinational said it was dropping carbon labels and instead directly managing its supply chains. Many other companies are similarly choosing direct management over consumer choice as the most effective route to emission reductions. In so doing, they are shouldering greater responsibility for the emissions and impacts of their supply chains. But environmental concerns must not be allowed to trump development needs and companies must not unfairly disadvantage smaller-scale producers in developing countries.

  15. Cosmic ray production curves below reworking zones

    International Nuclear Information System (INIS)

    Blanford, G.E.

    1980-01-01

    A method is presented for calculating cosmic ray production profiles below reworking zones. The method uses an input reworking depth determined from data such as signatures in the depth profile of ferromagnetic resonance intensity and input cosmic ray production profiles for an undisturbed surface. Reworking histories are simulated using Monte Carlo techniques, and depth profiles are used to determine cosmic ray exposure age limits with a specified probability. It is shown that the track density profiles predict cosmic ray exposure ages in lunar cores that are consistent with values determined by other methods. Results applied to neutron fluence and spallation rare gases eliminate the use of reworking depth as an adjustable parameter and give cosmic ray exposure ages that are compatible with each other

  16. Determining the market value of high-rise residential buildings based on evaluation of consumer properties

    Directory of Open Access Journals (Sweden)

    Kolobova Svetlana

    2018-01-01

    Full Text Available As you know, high-rise construction is an indicator of the practical implementation of advanced innovative technologies in the construction industry of the country. High-rise building inevitably comes to the big cities, in connection with the shortage and value of land. The life cycle of any construction project, including high-rise buildings consists of chains: of engineering survey - design-construction-operation. In the process of operation of a tall building, decisions about major repairs or reconstruction of a building are made for decision-making on further use. This article describes methods of assessing the consumer quality of high-rise residential buildings and the establishment of prices based on consumer characteristics of a tall residential building. It is proposed to assess the premises under their quality characteristics. The study was conducted to establish the influence of individual, comprehensive and integral indicators of comparable quality for effective quality living spaces. Simultaneously, there was established a relationship of quality with the consumer cost of housing, ultimately with the potential needs of owners, tenants of the home, lessor dwelling, or buyers of residential properties and other participants in the residential real estate market. This relationship further creates consumer requirements to quality standard of premises at a certain stage of socio-economic development.

  17. Determining the market value of high-rise residential buildings based on evaluation of consumer properties

    Science.gov (United States)

    Kolobova, Svetlana

    2018-03-01

    As you know, high-rise construction is an indicator of the practical implementation of advanced innovative technologies in the construction industry of the country. High-rise building inevitably comes to the big cities, in connection with the shortage and value of land. The life cycle of any construction project, including high-rise buildings consists of chains: of engineering survey - design-construction-operation. In the process of operation of a tall building, decisions about major repairs or reconstruction of a building are made for decision-making on further use. This article describes methods of assessing the consumer quality of high-rise residential buildings and the establishment of prices based on consumer characteristics of a tall residential building. It is proposed to assess the premises under their quality characteristics. The study was conducted to establish the influence of individual, comprehensive and integral indicators of comparable quality for effective quality living spaces. Simultaneously, there was established a relationship of quality with the consumer cost of housing, ultimately with the potential needs of owners, tenants of the home, lessor dwelling, or buyers of residential properties and other participants in the residential real estate market. This relationship further creates consumer requirements to quality standard of premises at a certain stage of socio-economic development.

  18. A model for (re)building consumer trust in the food system.

    Science.gov (United States)

    Wilson, Annabelle M; Withall, Elizabeth; Coveney, John; Meyer, Samantha B; Henderson, Julie; McCullum, Dean; Webb, Trevor; Ward, Paul R

    2017-12-01

    The article presents a best practice model that can be utilized by food system actors to assist with (re)building trust in the food system, before, during and after a food incident defined as 'any situation within the food supply chain where there is a risk or potential risk of illness or confirmed illness or injury associated with the consumption of a food or foods' (Commonwealth of Australia. National Food Incident Response Protocol. Commonwealth of Australia, Canberra, 2012). Interviews were undertaken with 105 actors working within the media, food industry and food regulatory settings across Australia, New Zealand (NZ) and the United Kingdom (UK). Interview data produced strategy statements, which indicated participant views on how to (re)build consumer trust in the food system. These included: (i) be transparent, (ii) have protocols and procedures in place, (iii) be credible, (iv) be proactive, (v) put consumers first, (vi) collaborate with stakeholders, (vii) be consistent, (viii) educate stakeholders and consumers, (ix) build your reputation and (x) keep your promises. A survey was designed to enable participants to indicate their agreement/disagreement with the ideas, rate their importance and provide further comment. The five strategies considered key to (re)building consumer trust were used to develop a model demonstrating best practice strategies for (re)building consumer trust in the food system before, during and after a food incident. In a world where the food system is increasingly complex, strategies for (re)building and fostering consumer trust are important. This study offers a model to do so which is derived from the views and experiences of actors working across the food industry, food regulation and the media. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  19. Logistic planning and control of reworking perishable production defectives

    NARCIS (Netherlands)

    R.H. Teunter (Ruud); S.D.P. Flapper

    2001-01-01

    textabstractWe consider a production line that is dedicated to a single product. Produced lots may be non-defective, reworkable defective, or non-reworkable defective. The production line switches between production and rework. After producing a fixed number (N) of lots, all reworkable defective

  20. 7 CFR 983.152 - Failed lots/rework procedure.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Failed lots/rework procedure. 983.152 Section 983.152..., ARIZONA, AND NEW MEXICO Rules and Regulations § 983.152 Failed lots/rework procedure. (a) Inshell rework procedure for aflatoxin. If inshell rework is selected as a remedy to meet the aflatoxin regulations of this...

  1. The Role of Consumer Experiences in Building the image of brands: A Study in Airlines

    Directory of Open Access Journals (Sweden)

    Ana Iris Tomás Vasconcelos

    2015-04-01

    Full Text Available Studies on brand and consumer experience gained emphasis from the twentieth century, however the relationship between these themes still has gaps. Therefore, this study examines the role of consumer experiences in building the brand image through the identification of thoughts, feelings and actions arising from consumer experiences with airlines, and the types of associations that the consumer makes such marks. Therefore, a variation of qualitative critical incident technique was used, considering those remembered experiences that have excelled in consumer perception, interviewing ten users of air services, based on a two parts semi-structured form: description of experiences with airlines and information about the image of the brands of airlines. The analyzed data have revealed that thoughts, feelings and actions arising from consumer experiences become important elements in shaping the perception of brands of airlines. Through the consumption experience, consumers mainly use the service attributes to build their perception of the marks of the airlines. These attributes are used either directly as to support other types of associations such as those related to company size.

  2. Model Sumber Dan Penyebab Rework Pada Tahapan Proyek Konstruksi

    OpenAIRE

    Chundawan, Erick; Alifen, Ratna S

    2014-01-01

    In construction, rework is unavoidable. Rework usually occurs due to mistake from workmanship cause by change, error and omission. Additional cost accruing from of rework on a construction project in Surabaya is around 5.7% from the total cost of project.In this research, questionnaires were distributed to contractors in Surabaya. Questionnaires were composed based on the construction phases, the sources and the causes of rework in order to design a model of rework on construction project. Wi...

  3. Green Buildings in Denmark – From radical ecology to consumer oriented market approaches?

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Gram-Hanssen, Kirsten

    2004-01-01

    Gram-Hanssen and Jensen explore the development of green buildings in Denmark over the last three decades, identifying differences in design philosophies and techniques. They look at four approaches to green buildings: as energy-saving devices, as ecological grassroots alternatives, as subsidised...... large-scale urban projects, and as consumer products in a market approach. Using detailed case descriptions, the chapter asks to what extent it is possible to define some buildings or some approaches as more 'green' than others. The authors suggest that in order to more fully understand sustainable...... buildings we must account for the social structuring of both the identification of environmental problems and their resulting embodiment in built form....

  4. THE IMPORTANCE OF AFFECT TO BUILD CONSUMER TRUST IN HIGH-CONSEQUENCES EXCHANGES

    Directory of Open Access Journals (Sweden)

    Mellina da Silva Terres

    2012-12-01

    Full Text Available The present article investigates the importance of affect displayed by service provider to build consumer trust in high consequence exchanges. High-consequence exchanges are difficult situations in which the choices present a dilemma that can cause stress and severe emotional reactions (KAHN; LUCE, 2003. In this specific case, trust based on affect seems to become important; mainly because consumers may not have ability to evaluate the cognitive aspects of the situation, and moreover, a medical services failure can be highly problematic or even fatal (LEISEN; HYMAN, 2004. On the other hand, in low-consequence choices, we are predicting that cognition will be more important than affect in building trust. In this kind of situation, patients are more self-confident, less sensitive, and don’t perceive a high probability of loss (KUNREUTHER et al., 2002, and therefore focuses more on the rational outcomes.

  5. 7 CFR 983.52 - Failed lots/rework procedure.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Failed lots/rework procedure. 983.52 Section 983.52..., ARIZONA, AND NEW MEXICO Regulations § 983.52 Failed lots/rework procedure. (a) Substandard pistachios... committee may establish, with the Secretary's approval, appropriate rework procedures. (b) Failed lot...

  6. Logistics planning of rework with deteriorating work-in-process

    NARCIS (Netherlands)

    Flapper, S.D.P.; Teunter, R.

    2004-01-01

    Rework is described as the transformation of production rejects into re-usable products of the same or lower quality. Rework can be very profitable, especially if disposal costs are high and if materials are expensive and limited in availability. Furthermore, rework can contribute to a ‘green

  7. Reworking The Antonsen-Bormann Idea

    International Nuclear Information System (INIS)

    Kamath, S G

    2012-01-01

    The Antonsen – Bormann idea was originally proposed by these authors for the computation of the heat kernel in curved space; it was also used by the author recently with the same objective but for the Lagrangian density for a real massive scalar field in 2 + 1 dimensional curved space. It is now reworked here with a different purpose – namely, to determine the zeta function for the said model using the Schwinger operator expansion.

  8. Column Grid Array Rework for High Reliability

    Science.gov (United States)

    Mehta, Atul C.; Bodie, Charles C.

    2008-01-01

    Due to requirements for reduced size and weight, use of grid array packages in space applications has become common place. To meet the requirement of high reliability and high number of I/Os, ceramic column grid array packages (CCGA) were selected for major electronic components used in next MARS Rover mission (specifically high density Field Programmable Gate Arrays). ABSTRACT The probability of removal and replacement of these devices on the actual flight printed wiring board assemblies is deemed to be very high because of last minute discoveries in final test which will dictate changes in the firmware. The questions and challenges presented to the manufacturing organizations engaged in the production of high reliability electronic assemblies are, Is the reliability of the PWBA adversely affected by rework (removal and replacement) of the CGA package? and How many times can we rework the same board without destroying a pad or degrading the lifetime of the assembly? To answer these questions, the most complex printed wiring board assembly used by the project was chosen to be used as the test vehicle, the PWB was modified to provide a daisy chain pattern, and a number of bare PWB s were acquired to this modified design. Non-functional 624 pin CGA packages with internal daisy chained matching the pattern on the PWB were procured. The combination of the modified PWB and the daisy chained packages enables continuity measurements of every soldered contact during subsequent testing and thermal cycling. Several test vehicles boards were assembled, reworked and then thermal cycled to assess the reliability of the solder joints and board material including pads and traces near the CGA. The details of rework process and results of thermal cycling are presented in this paper.

  9. Dataset of Atmospheric Environment Publication in 2016, Characterization of organophosphorus flame retardants’ sorption on building materials and consumer products

    Data.gov (United States)

    U.S. Environmental Protection Agency — The data presented in this data file is a product of a journal publication. The dataset contains OPFR sorption concentrations on building materials and consumer...

  10. Thermal Simulation of the Component Rework Profile Temperature

    OpenAIRE

    Nurminen, Janne

    2015-01-01

    The aim of this study was to clarify the possibilities and feasibility of the ther-mal simulation for the modeling of the rework process. The rework process modeling could enable an easy and fast access to the component and PWB level thermally critical effects like over and under heating of the component during the rework process. The modeling could also be used as a help of the real rework profile definition at an early phase of the electrical device development. The work includes a...

  11. [How to build the legitimacy of patient and consumer participation in health issues?].

    Science.gov (United States)

    Ghadi, V; Naiditch, M

    2006-06-01

    Initially introduced by Juppé in 1996, the legislative reforms of January 2nd and March 4th 2002 legally enacted new forms of consumer representation and participation in the development of the health system. However, it appears that while this new role which was created to ensure legitimate participation has been recognised by law in theory, it has not necessarily received the same recognition and incorporation in practice at the grass roots level. As a result, it is now essential to think about practical methods of representation in order to sustain local legitimacy of consumers and patients on the ground and construct it from the bottom-up. The goal of this work was to understand how and under what conditions local legitimacy for health care system consumers, as a particular group of actors, can be effectively built, independently and irrespective of the specific question of elective democratic processes. The foundation of this work is based on material which resides in the collection of data from various local participation experiments that we or other researchers have contributed to establishing in a select group of health care settings. The results of this analysis serve to update a list of principle factors through which the legitimacy of the health care system's users is constructed. Such factors include the following: the promoting agents' expectations vis-à-vis the system's users and the a priori status which is given to them; the identification and selection methods used for choosing users, and the link to the types of users in terms of representation; the nature of the "generalisation" process for decision-making, understood as the process which transforms individuals' words and perspectives into collective ones; and the conditions for and modes of interaction between laypersons and professional experts. Finally, the paper presents the potential conflictive relationship or tension which may exist between representation and legitimacy with regard to

  12. Welding rework data acquisition and automation

    Science.gov (United States)

    Romine, Peter L.

    1996-01-01

    Aluminum-Lithium is a modern material that NASA MSFC is evaluating as an option for the aluminum alloys and other aerospace metals presently in use. The importance of aluminum-lithium is in it's superior weight to strength characteristics. However, aluminum-lithium has produced many challenges in regards to manufacturing and maintenance. The solution to these problems are vital to the future uses of the shuttle for delivering larger payloads into earth orbit and are equally important to future commercial applications of aluminum-lithium. The Metals Processes Branch at MSFC is conducting extensive tests on aluminum-lithium which includes the collection of large amounts of data. This report discusses the automation and data acquisition for two processes: the initial weld and the repair. The new approach reduces the time required to collect the data, increases the accuracy of the data, and eliminates several types of human errors during data collection and entry. The same material properties that enhance the weight to strength characteristics of aluminum-lithium contribute to the problems with cracks occurring during welding, especially during the repair/rework process. The repairs are required to remove flaws or defects discovered in the initial weld, either discovered by x-ray, visual inspection, or some other type of nondestructive evaluation. It has been observed that cracks typically appear as a result of or beyond the second repair. MSFC scientists have determined that residual mechanical stress introduced by the welding process is a primary cause of the cracking. Two obvious solutions are to either prevent or minimize the stress introduced during the welding process, or remove or reduce the stress after the welding process and MSFC is investigating both of these.

  13. Paleogene reworked foraminifera in Recent sediments off Daman, Western India

    Digital Repository Service at National Institute of Oceanography (India)

    Nigam, R.; Setty, M.G.A.P.

    The first record of reworked foraminiferal species in the Recent sediments off the coast of Daman is reported. Among others, @iQuadrimorphina advena, Uvigerina minuta, Gyroidinoides soldani, Bulimina aguafrescanensis@@ and @iAlabamina atlantisae...

  14. Building the Case: Changing Consumer Perceptions of the Value of Expanded Community Pharmacist Services.

    Science.gov (United States)

    Steckowych, Kathryn; Smith, Marie; Spiggle, Susan; Stevens, Andrew; Li, Hao

    2018-01-01

    The role of the community pharmacist has traditionally been a medication dispenser; however, community pharmacists' responsibilities must expand to include more direct patient care services in order to transform primary care practice. Use case-based scenarios to (1) determine factors that contribute to positive and negative consumer perceptions of expanded community pharmacist patient care roles, (2) identify facilitators and barriers that contribute to consumer perceptions of the value of expanded community pharmacist patient care services, and (3) develop a successful approach and strategies for increasing consumer advocacy for the value of expanded community pharmacist patient care services. Two consumer focus groups used scenario-based guided discussions and Likert scale questionnaires to elicit consumer reactions, facilitators, and barriers to expanded community pharmacist services. Convenience, timeliness, and accessibility were common positive reactions across all 3 scenarios. Team approach to care and trust were viewed as major facilitators. Participant concerns included uncertainty about pharmacist training and qualifications, privacy, pharmacists' limited bandwidth to accept new tasks, and potential increased patient costs. Common barriers to service uptake included a lack of insurance payment and physician preference to provide the services. Consumer unfamiliarity with non-traditional community pharmacist services is likely an influencer of consumers' hesitancy to utilize such services; therefore, an opportunity exists to engage consumers and advocacy organizations in supporting expanded community pharmacist roles. This study can inform consumers, advocates, community pharmacists, primary care providers, and community-based organizations on methods to shape consumer perceptions on the value of community pharmacist expanded services.

  15. Characterization of changes in commercial building structure, equipment, and occupants: End-Use Load and Consumer Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, R.G.; Taylor, Z.T.; Miller, N.E.; Pratt, R.G.

    1990-12-01

    Changes in commercial building structure, equipment, and occupants result in changes in building energy use. The frequency and magnitude of those changes have substantial implications for conservation programs and resource planning. For example, changes may shorten the useful lifetime of a conservation measure as well as impact the savings from that measure. This report summarizes the frequency of changes in a commercial building sample that was end-use metered under the End-Use Load and Consumer Assessment Program (ELCAP). The sample includes offices, dry good retails, groceries, restaurants, warehouses, schools, and hotels. Two years of metered data, site visit records, and audit data were examined for evidence of building changes. The observed changes were then classified into 12 categories, which included business type, equipment, remodel, vacancy, and operating schedule. The analysis characterized changes in terms of frequency of types of change; relationship to building vintage and floor area; and variation by building type. The analysis also examined the energy impacts of various changes. The analysis determined that the rate of change in commercial buildings is high--50% of the buildings experienced one type of change during the 2 years for which monitoring data were examined. Equipment changes were found to be most frequent in offices and retail stores. Larger, older office buildings tend to experience a wider variety of changes more frequently than the smaller, newer buildings. Key findings and observations are presented in Section 2. Section 3 provides the underlying motivation and objectives. In Section 4, the methodology used is documented, including the commercial building sample and the data sources used. Included are the definitions of change events and the overall approach taken. Results are analyzed in Section 5, with additional technical details in Appendixes. 2 refs., 46 figs., 22 tabs. (JF)

  16. Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

    NARCIS (Netherlands)

    Teunter, R.; Flapper, S.D.P.

    2003-01-01

    We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

  17. Leveraging corporate social responsibility to improve consumer safety of dietary supplements sold for weight loss and muscle building.

    Science.gov (United States)

    Kulkarni, Anvita; Huerto, Ryan; Roberto, Christina A; Austin, S Bryn

    2017-03-01

    The potential dangers associated with dietary supplements sold for weight loss and muscle building are well documented and increasingly garnering the attention of the media, public, and government leaders. Public health professionals have an opportunity to improve population health in the context of dietary supplement use by translating scientific evidence into action. In this commentary, we discuss the potential to motivate corporate social responsibility (CSR) among manufacturers and retailers of dietary supplements sold for weight loss and muscle building. We examine levers available to public health professionals for generating voluntary corporate self-regulation by reviewing examples from successful CSR initiatives in other domains of public health and offering recommendations highlighting effective advocacy strategies. We encourage public health professionals to use one or multiple advocacy strategies to improve consumer protections for dietary supplements sold for weight loss and muscle building.

  18. Lacie phase 1 Classification and Mensuration Subsystem (CAMS) rework experiment

    Science.gov (United States)

    Chhikara, R. S.; Hsu, E. M.; Liszcz, C. J.

    1976-01-01

    An experiment was designed to test the ability of the Classification and Mensuration Subsystem rework operations to improve wheat proportion estimates for segments that had been processed previously. Sites selected for the experiment included three in Kansas and three in Texas, with the remaining five distributed in Montana and North and South Dakota. The acquisition dates were selected to be representative of imagery available in actual operations. No more than one acquisition per biophase were used, and biophases were determined by actual crop calendars. All sites were worked by each of four Analyst-Interpreter/Data Processing Analyst Teams who reviewed the initial processing of each segment and accepted or reworked it for an estimate of the proportion of small grains in the segment. Classification results, acquisitions and classification errors and performance results between CAMS regular and ITS rework are tabulated.

  19. ANALISIS REWORK PADA PROYEK KONSTRUKSI GEDUNG DI KABUPATEN BADUNG

    Directory of Open Access Journals (Sweden)

    Nana Sutrisna

    2013-07-01

    Full Text Available Rework is unavoidable from the world of construction, Rework can be a devastating effect on the performance and productivity of both the consultant and the contractor. This study aims to determine the main factors causing rework, efforts to reduce rework. The analysis used the analysis Multivariant factor analysis with the help of Statistical Package for Social Science (SPSS for Windows version 17.0. From the results obtained by factor analysis the main factors causing the occurrence of rework are: aspects of the owner (poor communication, poor coordination, poor information flow, aspects of planning consultants (lack of information in the field, lack of communication, the situation in the picture on the ground is not suitable. aspects of construction management consultants (lack of information in the field, lack of communication, lack of control, aspects of mechanical electrical plumbing contractors (Materials misdirected, MEP staff inexperience, lack of knowledge about the character of the material, the amount of overtime, aspects of the contractor (lack of competence foreman, foreman lack of experience, lack of experience, the quality of labor is bad, the error in interpreting the specification, aspects of operator (poor flow of information, lack of communication, lack of coordination, lack of operator experience. Efforts to systematically reduce rework most effective according to the respondent's answer is: Systematic planning, detailing and describing the project at every stage of the steps to be taken to achieve quality objectives, set standards of communication, coordination and construction project sinkronasi work with all parties involved in the implementation of the project, Constructing specification limits and criteria and quality standards to be used in engineering design, procurement and construction materials.

  20. The Automated Aircraft Rework System (AARS): A system integration approach

    Science.gov (United States)

    Benoit, Michael J.

    1994-01-01

    The Mercer Engineering Research Center (MERC), under contract to the United States Air Force (USAF) since 1989, has been actively involved in providing the Warner Robins Air Logistics Center (WR-ALC) with a robotic workcell designed to perform rework automated defastening and hole location/transfer operations on F-15 wings. This paper describes the activities required to develop and implement this workcell, known as the Automated Aircraft Rework System (AARS). AARS is scheduled to be completely installed and in operation at WR-ALC by September 1994.

  1. Building Knowledge of Consumer Participation in Criminal Justice in Australia: A Case Study

    Directory of Open Access Journals (Sweden)

    Sophie De'Ath

    2018-03-01

    Full Text Available This exploratory study investigates the various factors to be considered when developing and implementing consumer participation in community-based criminal justice settings. The study uses the Victorian Association for the Care and Resettlement of Offenders (VACRO, based in Melbourne, Australia, as its case study site as this organisation is in the process of formally introducing consumer participation. The study is informed by previous research in key areas related to criminal justice, focusing on the perspectives of various stakeholders: staff, volunteers, and consumers. A mixed method approach offered a range of opportunities for participants to engage with the research. Thematic analysis identified multi-layered issues need to be considered when implementing consumer participation. Poor individual understanding was noted as a barrier, alongside a limited shared vision of the concept. These were seen to be influenced by practical issues such as high staff turnover and conceptual challenges, notably the existing discourse around offenders. The implications of these findings for further research on consumer participation in the criminal justice setting are explored.

  2. Selective classification and quantification model of C&D waste from material resources consumed in residential building construction.

    Science.gov (United States)

    Mercader-Moyano, Pilar; Ramírez-de-Arellano-Agudo, Antonio

    2013-05-01

    The unfortunate economic situation involving Spain and the European Union is, among other factors, the result of intensive construction activity over recent years. The excessive consumption of natural resources, together with the impact caused by the uncontrolled dumping of untreated C&D waste in illegal landfills have caused environmental pollution and a deterioration of the landscape. The objective of this research was to generate a selective classification and quantification model of C&D waste based on the material resources consumed in the construction of residential buildings, either new or renovated, namely the Conventional Constructive Model (CCM). A practical example carried out on ten residential buildings in Seville, Spain, enabled the identification and quantification of the C&D waste generated in their construction and the origin of the waste, in terms of the building material from which it originated and its impact for every m(2) constructed. This model enables other researchers to establish comparisons between the various improvements proposed for the minimization of the environmental impact produced by building a CCM, new corrective measures to be proposed in future policies that regulate the production and management of C&D waste generated in construction from the design stage to the completion of the construction process, and the establishment of sustainable management for C&D waste and for the selection of materials for the construction on projected or renovated buildings.

  3. Semi-Automated Diagnosis, Repair, and Rework of Spacecraft Electronics

    Science.gov (United States)

    Struk, Peter M.; Oeftering, Richard C.; Easton, John W.; Anderson, Eric E.

    2008-01-01

    capacity and skill demands from exceeding crew time and training limits, the CLEAR project is examining options provided by non-real time tele-operations, robotics, and a new generation of diagnostic equipment. This paper outlines a strategy to create an effective repair environment where, with the support of ground based engineers, crewmembers can diagnose, repair and test flight electronics in-situ. This paper also discusses the implications of successful tele-robotic repairs when expanded to rework and reconfiguration of used flight assets for building Constellation infrastructure elements.

  4. An Analysis of “Natural” Food Litigation to Build a Sesame Allergy Consumer Class Action.

    Science.gov (United States)

    Shaker, Dana

    In a world where food allergy is still an incurable disease, law and regulation stand as necessary mechanisms to provide food-allergic consumers with the information they need to protect their health. The Food Allergen Labeling and Consumer Protection Act of 2004 provided specific labeling requirements for the “Top Eight” allergens in the U.S.: milk, soy, gluten, egg, tree nut, peanut, fish, and Crustacean shellfish. Since then, sesame has become more prevalent as an allergen and remains just as dangerous, inducing anaphylactic shock in some sesame-allergic individuals. Yet sesame remains unregulated, despite advocates and congressional members arguing for its inclusion. This note entertains one solution to this problem by exploring the most strategic way to bring a sesame allergy class action against a private food company under California’s consumer protection statutes. Because this kind of class action does not have much, if any, precedent, this note analyzes the basic, preliminary issues that any litigant would have to navigate around to certify a class, including preemption, standing, and the claim itself, by focusing on how courts have examined these issues in the recent “natural” class action litigation. It also analyzes the legal, moral, and practical aspects of choosing a type of relief, as well as whom to include in the class. Finally, this note briefly considers how FDA itself can ensure sesame is regulated on the labels of food products, given that some of the legal issues may well be insurmountable for this particular class action. This note explores the potential solutions to difficult legal hurdles in constructing a sesame allergy class action, arguing that litigating a sesame allergy class action—even if it is not ultimately successful—could start a productive conversation that might lead Congress or FDA to provide greater public health and consumer protection for those with sesame allergy.

  5. Building Mobile Apps for Underrepresented Mental Health care Consumers: A Grounded Theory Approach.

    Science.gov (United States)

    Leung, Ricky; Hastings, Julia F; Keefe, Robert H; Brownstein-Evans, Carol; Chan, Keith T; Mullick, Rosemary

    2016-01-01

    Cell phone mobile application ("app") use has risen dramatically within the past several years. Many individuals access apps to address mental health issues. Unlike individuals from privileged backgrounds, individuals from oppressed backgrounds may rely on apps rather than costly mental health treatment. To date, very little research has been published evaluating mental health apps' effectiveness. This paper focuses on three methods through which grounded theory can facilitate app development and evaluation for people underrepresented in mental health care. Recommendations are made to advance mobile app technology that will help clinicians provide effective treatment, and consumers to realize positive treatment outcomes.

  6. Building Mobile Apps for Underrepresented Mental Health care Consumers: A Grounded Theory Approach

    Science.gov (United States)

    Leung, Ricky; Hastings, Julia F.; Keefe, Robert H.; Brownstein-Evans, Carol; Chan, Keith T.; Mullick, Rosemary

    2017-01-01

    Cell phone mobile application (“app”) use has risen dramatically within the past several years. Many individuals access apps to address mental health issues. Unlike individuals from privileged backgrounds, individuals from oppressed backgrounds may rely on apps rather than costly mental health treatment. To date, very little research has been published evaluating mental health apps’ effectiveness. This paper focuses on three methods through which grounded theory can facilitate app development and evaluation for people underrepresented in mental health care. Recommendations are made to advance mobile app technology that will help clinicians provide effective treatment, and consumers to realize positive treatment outcomes. PMID:29056878

  7. Economic production quantity models for imperfect product and service with rework

    OpenAIRE

    Tai, Allen H.

    2012-01-01

    When imperfect quality products are produced in a production process, rework may be performed to make them become serviceable. In an inventory system, items may deteriorate. Selling deteriorated items to customers will create negative impact on corporate image. In this paper, two economic production quantity (EPQ) models are proposed for deteriorating items with rework process. A single production-rework plant system and a system consists of $n$ production plants and one rework plant are cons...

  8. Design Rework Prediction in Concurrent Design Environment: Current Trends and Future Research Directions

    OpenAIRE

    Arundachawat, Panumas; Roy, Rajkumar; Al-Ashaab, Ahmed; Shehab, Essam

    2009-01-01

    Organised by: Cranfield University This paper aims to present state-of-the-art and formulate future research areas on design rework in concurrent design environment. Related literatures are analysed to extract the key factors which impact design rework. Design rework occurs due to changes from upstream design activities and/or by feedbacks from downstream design activities. Design rework is considered as negative iteration; therefore, value in design activities will be increase...

  9. Building a Sustainable Society: The Necessity to Change the Term 'Consumer'

    Directory of Open Access Journals (Sweden)

    Sabrina Chakori

    2017-10-01

    Full Text Available The profit-seeking system leads to many negative environmental impacts. Within this economic system, consumption reflects an important relationship between humans and nature. However, despite the growing international attention to environmental sustainability, our society does not necessarily acknowledge consumerism as the cause of global environmental degradation. Deconstructing the consumption culture and redefining what determines well-being, this paper will attempt to provide a comprehensive overview of the existing definition of people in the economic system. Many authors have defined our role in the economy; however, in terms of customer, citizen-consumer, and socially conscious consumer, most of the literature in this domain remains rooted in consumerism. Consumerism cannot be fixed with further consumerism; therefore this paper discusses the importance of reclaiming our identity and the need to define new terms for people in a new economic system. Any new terms should integrate interests and responsibilities that go beyond simple utility maximization. Moving beyond the term “consumer” will change our worldview. This cultural transformation may help facilitate long-term environmental sustainability.

  10. System reliability evaluation of a touch panel manufacturing system with defect rate and reworking

    International Nuclear Information System (INIS)

    Lin, Yi-Kuei; Huang, Cheng-Fu; Chang, Ping-Chen

    2013-01-01

    In recent years, portable consumer electronic products, such as cell phone, GPS, digital camera, tablet PC, and notebook are using touch panel as interface. With the demand of touch panel increases, performance assessment is essential for touch panel production. This paper develops a method to evaluate system reliability of a touch panel manufacturing system (TPMS) with defect rate of each workstation and takes reworking actions into account. The system reliability which evaluates the possibility of demand satisfaction can provide to managers with an understanding of the system capability and can indicate possible improvements. First, we construct a capacitated manufacturing network (CMN) for a TPMS. Second, a decomposition technique is developed to determine the input flow of each workstation based on the CMN. Finally, we generate the minimal capacity vectors that should be provided to satisfy the demand. The system reliability is subsequently evaluated in terms of the minimal capacity vectors. A further decision making issue is discussed to decide a reliable production strategy. -- Graphical abstract: The proposed procedure to evaluate system reliability of the touch panel manufacturing system (TPMS). Highlights: • The system reliability of a touch panel manufacturing system (TPMS) is evaluated. • The reworking actions are taken into account in the TPMS. • A capacitated manufacturing network is constructed for the TPMS. • A procedure is proposed to evaluate system reliability of TPMS

  11. Rework of flip chip bonded radiation pixel detectors

    International Nuclear Information System (INIS)

    Vaehaenen, S.; Heikkinen, H.; Pohjonen, H.; Salonen, J.; Savolainen-Pulli, S.

    2008-01-01

    In this paper, some practical aspects of reworking flip chip hybridized pixel detectors are discussed. As flip chip technology has been advancing in terms of placement accuracy and reliability, large-area hybrid pixel detectors have been developed. The area requirements are usually fulfilled by placing several readout chips (ROCs) on single sensor chip. However, as the number of ROCs increases, the probability of failure in the hybridization process and the ROC operation also increases. Because high accuracy flip chip bonding takes time, a significant part of the price of a pixel detector comes from the flip chip assembly process itself. As large-area detector substrates are expensive, and many flip chip placements are required, the price of an assembled detector can become very high. In a typical case, there is just one bad ROC (out of several) on a faulty detector to be replaced. Considering the high price of pixel detectors and the fact that reworking faulty ROCs does not take much longer than the original placement, it is worthwhile to investigate the feasibility of a rework process

  12. Rework of flip chip bonded radiation pixel detectors

    Energy Technology Data Exchange (ETDEWEB)

    Vaehaenen, S. [VTT MEMS and Micropackaging, Espoo 02150 (Finland)], E-mail: sami.vahanen@vtt.fi; Heikkinen, H.; Pohjonen, H.; Salonen, J.; Savolainen-Pulli, S. [VTT MEMS and Micropackaging, Espoo 02150 (Finland)

    2008-06-11

    In this paper, some practical aspects of reworking flip chip hybridized pixel detectors are discussed. As flip chip technology has been advancing in terms of placement accuracy and reliability, large-area hybrid pixel detectors have been developed. The area requirements are usually fulfilled by placing several readout chips (ROCs) on single sensor chip. However, as the number of ROCs increases, the probability of failure in the hybridization process and the ROC operation also increases. Because high accuracy flip chip bonding takes time, a significant part of the price of a pixel detector comes from the flip chip assembly process itself. As large-area detector substrates are expensive, and many flip chip placements are required, the price of an assembled detector can become very high. In a typical case, there is just one bad ROC (out of several) on a faulty detector to be replaced. Considering the high price of pixel detectors and the fact that reworking faulty ROCs does not take much longer than the original placement, it is worthwhile to investigate the feasibility of a rework process.

  13. Building

    OpenAIRE

    Seavy, Ryan

    2014-01-01

    Building for concrete is temporary. The building of wood and steel stands against the concrete to give form and then gives way, leaving a trace of its existence behind. Concrete is not a building material. One does not build with concrete. One builds for concrete. MARCH

  14. Analysis of Alternative Rework Strategies for Printed Wiring Assembly Manufacturing Systems

    OpenAIRE

    Driels, Morris; Klegka, John S.

    1991-01-01

    This paper presents a model for predicting the cost of test, diagnosis, and rework activities in the manufacture of printed wiring assemblies (PWA's). Rework is defined as all actions taken to correct or improve the basic assembly process. These actions may include those of inspectors and solder touchup technicians who do not add value to the PWA, but whose actions are required in order to produce acceptable yields from the manufacturing process. Two alternative rework strategies for cont...

  15. An economic production model for time dependent demand with rework and multiple production setups

    Directory of Open Access Journals (Sweden)

    S.R. Singh

    2014-04-01

    Full Text Available In this paper, we present a model for time dependent demand with multiple productions and rework setups. Production is demand dependent and greater than the demand rate. Production facility produces items in m production setups and one rework setup (m, 1 policy. The major reason of reverse logistic and green supply chain is rework, so it reduces the cost of production and other ecological problems. Most of the researchers developed a rework model without deteriorating items. A numerical example and sensitivity analysis is shown to describe the model.

  16. Occupational disease surveillance of an aircraft rework facility.

    Science.gov (United States)

    Fung, F; Bundy, M; Kennon, R

    1990-11-01

    Analysis of the 1987-1988 morbidity data of an aircraft rework facility's 6,672 employees identified 118 patients with occupational diseases. In our study, 61 cases (52%) involved eye and skin conditions. This was comparable to the State of California occupational diseases report. However, systemic conditions appeared to be higher (24% vs. 7%) in the study group, and this finding may need further investigation to clarify its significance. Patients employed as craftworkers accounted for nearly half of all reported occupational diseases. Federal workers in this facility appeared to have a higher percentage (70%) of "no time lost" when compared with that of the State of California report (54%). The utility of morbidity data in the prevention of occupational diseases is discussed.

  17. Planning and control of rework in the process industries: a review

    NARCIS (Netherlands)

    Flapper, S.D.P.; Fransoo, J.C.; Broekmeulen, R.A.C.M.; Inderfurth, K.

    2002-01-01

    For all kinds of reasons, rework, i.e. the transformation of products not fulfilling preset specifications into products that do, is an important issue in process industries. Despite a considerable amount of published research on planning and control of rework, and in addition many papers referring

  18. Physical reworking by near-bottom flow alters the metazoan meiofauna of Fieberling Guyot (northeast Pacific)

    Science.gov (United States)

    Thistle, David; Levin, Lisa A.; Gooday, Andrew J.; Pfannkuche, Olaf; Lambshead, P. John D.

    1999-12-01

    Although much of the deep sea is physically tranquil, some regions experience near-bottom flows that rework the surficial sediment. During periods of physical reworking, animals in the reworked layer risk being suspended, which can have both positive and negative effects. Reworking can also change the sediment in ecologically important ways, so the fauna of reworked sites should differ from that of quiescent locations. We combined data from two reworked, bathyal sites on the summit of Fieberling Guyot (32°27.631'N, 127°49.489'W; 32°27.581'N, 127°47.839'W) and compared the results with those of more tranquil sites. We tested for differences in the following parameters, which seemed likely to be sensitive to the direct or indirect effects of reworking: (1) the vertical distribution of the meiofauna in the sea bed, (2) the relative abundance of surface-living harpacticoids, (3) the proportion of the fauna consisting of interstitial harpacticoids, (4) the ratio of harpacticoids to nematodes. We found that the vertical distributions of harpacticoid copepods, ostracods, and kinorhynchs were deeper on Fieberling. In addition, the relative abundance of surface-living harpacticoids was less, the proportion of interstitial harpacticoids was greater, and the ratio of harpacticoids to nematodes was greater on Fieberling. These differences between Fieberling and the comparison sites suggest that physical reworking affects deep-sea meiofauna and indicate the nature of some of the effects.

  19. How trust in institutions and organizations builds general consumer confidence in the safety of food: A decomposition of effects

    NARCIS (Netherlands)

    Jonge, de J.; Trijp, van J.C.M.; Lans, van der I.A.; Renes, R.J.; Frewer, L.J.

    2008-01-01

    This paper investigates the relationship between general consumer confidence in the safety of food and consumer trust in institutions and organizations. More specifically, using a decompositional regression analysis approach, the extent to which the strength of the relationship between trust and

  20. Rework of the ERA software system: ERA-8

    Science.gov (United States)

    Pavlov, D.; Skripnichenko, V.

    2015-08-01

    The software system that has been powering many products of the IAA during decades has undergone a major rework. ERA has capabilities for: processing tables of observations of different kinds, fitting parameters to observations, integrating equations of motion of the Solar system bodies. ERA comprises a domain-specific language called SLON, tailored for astronomical tasks. SLON provides a convenient syntax for reductions of observations, choosing of IAU standards to use, applying rules for filtering observations or selecting parameters for fitting. Also, ERA includes a table editor and a graph plotter. ERA-8 has a number of improvements over previous versions such as: integration of the Solar system and TT xA1 TDB with arbitrary number of asteroids; option to use different ephemeris (including DE and INPOP); integrator with 80-bit floating point. The code of ERA-8 has been completely rewritten from Pascal to C (for numerical computations) and Racket (for running SLON programs and managing data). ERA-8 is portable across major operating systems. The format of tables in ERA-8 is based on SQLite. The SPICE format has been chosen as the main format for ephemeris in ERA-8.

  1. Rework and workarounds in nurse medication administration process: implications for work processes and patient safety.

    Science.gov (United States)

    Halbesleben, Jonathon R B; Savage, Grant T; Wakefield, Douglas S; Wakefield, Bonnie J

    2010-01-01

    Health care organizations have redesigned existing and implemented new work processes intended to improve patient safety. As a consequence of these process changes, there are now intentionally designed "blocks" or barriers that limit how specific work actions, such as ordering and administering medication, are to be carried out. Health care professionals encountering these designed barriers can choose to either follow the new process, engage in workarounds to get past the block, or potentially repeat work (rework). Unfortunately, these workarounds and rework may lead to other safety concerns. The aim of this study was to examine rework and workarounds in hospital medication administration processes. Observations and semistructured interviews were conducted with 58 nurses from four hospital intensive care units focusing on the medication administration process. Using the constant comparative method, we analyzed the observation and interview data to develop themes regarding rework and workarounds. From this analysis, we developed an integrated process map of the medication administration process depicting blocks. A total of 12 blocks were reported by the participants. Based on the analysis, we categorized them as related to information exchange, information entry, and internal supply chain issues. Whereas information exchange and entry blocks tended to lead to rework, internal supply chain issues were more likely to lead to workarounds. A decentralized pharmacist on the unit may reduce work flow blocks (and, thus, workarounds and rework). Work process redesign may further address the problems of workarounds and rework.

  2. Faktor – Faktor Penyabab Pekerjaan Ulang (Rework) Pada Proyek Gedung Di Kabupaten Rokan Hulu Berdasarkan Persepsi Kontraktor

    OpenAIRE

    SARTIKA, YUNI; HIDAYAT, ARIFAL; SIBARANI, ARIE S

    2013-01-01

    Rework atau pekerjaan ulang sudah tidak asing dalam dunia konstruksi. Pada setiap pelaksanaan proyekberkemungkinan munculnya rework yang dapat menyebabkan terhambatnya pekerjaan dan pembengkakan biaya proyek. Faktor rework dari aspek desain dan dokumentasi merupakan faktor yang besar pengaruhnya terhadap pelaksanaan proyek konstruksi karena faktor desain merupakan langkah pertama sebelum pelaksanaan suatu proyekkonstruksi gedung

  3. How trust in institutions and organizations builds general consumer confidence in the safety of food: a decomposition of effects.

    Science.gov (United States)

    de Jonge, J; van Trijp, J C M; van der Lans, I A; Renes, R J; Frewer, L J

    2008-09-01

    This paper investigates the relationship between general consumer confidence in the safety of food and consumer trust in institutions and organizations. More specifically, using a decompositional regression analysis approach, the extent to which the strength of the relationship between trust and general confidence is dependent upon a particular food chain actor (for example, food manufacturers) is assessed. In addition, the impact of specific subdimensions of trust, such as openness, on consumer confidence are analyzed, as well as interaction effects of actors and subdimensions of trust. The results confirm previous findings, which indicate that a higher level of trust is associated with a higher level of confidence. However, the results from the current study extend on previous findings by disentangling the effects that determine the strength of this relationship into specific components associated with the different actors, the different trust dimensions, and specific combinations of actors and trust dimensions. The results show that trust in food manufacturers influences general confidence more than trust in other food chain actors, and that care is the most important trust dimension. However, the contribution of a particular trust dimension in enhancing general confidence is actor-specific, suggesting that different actors should focus on different trust dimensions when the purpose is to enhance consumer confidence in food safety. Implications for the development of communication strategies that are designed to regain or maintain consumer confidence in the safety of food are discussed.

  4. If you build it, will they eat it? Consumer preferences for plant-based and cultured meat burgers.

    Science.gov (United States)

    Slade, Peter

    2018-06-01

    In a hypothetical choice experiment consumers were given the option of purchasing burgers that were made from beef, plant-based protein, or cultured meat. Willingness to purchase plant-based and cultured meat burgers is linked to age, sex, views of other food technologies, and attitudes towards the environment and agriculture. Although consumers were told that all burgers tasted the same, there was a marked preference for beef burgers. A mixed-logit model predicts that, if prices were equal, 65% of consumers would purchase the beef burger, 21% would purchase the plant-based burger, 11% would purchase the cultured meat burger, and 4% would make no purchase. Preferences for plant-based and cultured meat burgers are found to be highly, but not perfectly, correlated. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Building Quality Report Cards for Geriatric Care in The Netherlands: Using Concept Mapping to Identify the Appropriate "Building Blocks" from the Consumer's Perspective

    Science.gov (United States)

    Groenewoud, A. Stef; van Exel, N. Job A.; Berg, Marc; Huijsman, Robbert

    2008-01-01

    Purpose: This article reports on a study to identify "building blocks" for quality report cards for geriatric care. Its aim is to present (a) the results of the study and (b) the innovative step-by-step approach that was developed to arrive at these results. Design and Methods: We used Concept Mapping/Structured Conceptualization to…

  6. Aerospace Manufacturing and Rework Facilities: National Emission Standards for Hazardous Air Pollutants (NESHAP)

    Science.gov (United States)

    Find regulatory information regarding the NESHAP for Aerospace manufacturing and rework facilities. This page contains the rule summary, rule history, and related rules and additional resources for this standard.

  7. Effects of rework on adhesion of Pb-In soldered gold thick films

    International Nuclear Information System (INIS)

    Gehman, R.W.; Becka, G.A.; Losure, J.A.

    1982-02-01

    The feasibility of repeatedly reworking Pb-In soldered joints on gold thick films was evaluated. Nailhead adhesion tests on soldered thick films typically resulted in failure within the bulk solder (50 In-50 Pb). Average strengths increased with each rework, and the failure mode changed. An increase in metalization lift-off occurred with successive reworks. An investigation was initiated to determine why these changes occurred. Based on this work, the thick film adhesion to the substrate appeared to be lowered by indium reduction of cadmium oxide and by formation of a weak, brittle intermetallic compound, Au 9 In 4 . It was concluded that two solder reworks could be conducted without significant amounts of metallization lift-off during nailhead testing

  8. The effect of rework content addition on the microstructure and viscoelastic properties of processed cheese.

    Science.gov (United States)

    Černíková, Michaela; Nebesářová, Jana; Salek, Richardos Nikolaos; Popková, Romana; Buňka, František

    2018-04-01

    The aim of this work was to add various amounts of rework (0.0 to 20.0% wt/wt) to processed cheeses with a dry matter content of 36% (wt/wt) and fat with a dry matter content of 45% (wt/wt). The effect of the rework addition on the viscoelastic properties and microstructure of the processed cheeses was observed. The addition of rework (in this case, to processed cheese with a spreadable consistency) in the amounts of 2.5, 5.0, and 10.0% (wt/wt) increased the firmness of the processed cheese. With the further addition of rework, the consistency of the processed cheeses no longer differed significantly. The conclusions obtained by the measurement of viscoelastic properties were supported by cryo-scanning electron microscopy, where fat droplets in samples with added rework of over 10.0% (wt/wt) were smaller than fat droplets in processed cheeses with lower additions of rework. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  9. Sediment reworking by a polychaete, Perinereis aibuhitensis, in the intertidal sediments of the Gomso Bay, Korea

    Science.gov (United States)

    Koo, Bon Joo; Seo, Jaehwan

    2017-12-01

    Bioturbation, especially sediment reworking by the activities of macroinvertebrates, such as feeding and burrowing, is one of the major processes that affect the physical, chemical, and biological characteristics of marine sediments. Given the importance of sediment reworking, this study was designed to evaluate the sediment reworking rate of a polychaete, Perinereis aibuhitensis, which is dominant in the upper tidal flats on the west coast of Korea, based on quantification of pellet production during spring and fall surveys. The density of individuals was higher in fall than in spring, whereas, due to a difference in the proportion of adults between the two seasons, the morphometric dimensions of the worm and its pellets were significantly longer and heavier in the spring. Hourly pellet production per inhabitant and density were closely related, with pellet production gradually decreasing as density increased. Daily pellet production was much higher in spring than in fall, mostly due to an increase in daytime production. The sediment reworking rate of Perinereis was similar in the two seasons in which observations were made and depended on its density and the sediment reworking rate per individual. The overall sediment reworking rate of Perinereis was 31 mm yr-1 based on its density in the study area.

  10. Optimization of a Multi-Product Intra-Supply Chain System with Failure in Rework.

    Science.gov (United States)

    Chiu, Singa Wang; Chen, Shin-Wei; Chang, Chih-Kai; Chiu, Yuan-Shyi Peter

    2016-01-01

    Globalization has created tremendous opportunities, but also made business environment highly competitive and turbulent. To gain competitive advantage, management of present-day transnational firms always seeks options to trim down various transaction and coordination costs, especially in the area of controllable intra-supply chain system. This study investigates a multi-product intra-supply chain system with failure in rework. To achieve maximum machine utilization, multiple products are fabricated in succession on a single machine. During the process, production of some defective items is inevitable. Reworking of nonconforming items is used to reduce the quality cost in production and achieving the goal of lower overall production cost. Because reworks are sometimes unsuccessful, failures in rework are also considered in this study. Finished goods for each product are transported to the sales offices when the entire production lot is quality assured after rework. A multi-delivery policy is used, wherein fixed quantity n installments of the finished lot are transported at fixed intervals during delivery time. The objective is to jointly determine the common production cycle time and the number of deliveries needed to minimize the long-term expected production-inventory-delivery costs for the problem. With the help of a mathematical model along with optimization technique, the optimal production-shipment policy is obtained. We have used a numerical example to demonstrate applicability of the result of our research.

  11. Optimization of a Multi–Product Intra-Supply Chain System with Failure in Rework

    Science.gov (United States)

    2016-01-01

    Globalization has created tremendous opportunities, but also made business environment highly competitive and turbulent. To gain competitive advantage, management of present-day transnational firms always seeks options to trim down various transaction and coordination costs, especially in the area of controllable intra-supply chain system. This study investigates a multi–product intra-supply chain system with failure in rework. To achieve maximum machine utilization, multiple products are fabricated in succession on a single machine. During the process, production of some defective items is inevitable. Reworking of nonconforming items is used to reduce the quality cost in production and achieving the goal of lower overall production cost. Because reworks are sometimes unsuccessful, failures in rework are also considered in this study. Finished goods for each product are transported to the sales offices when the entire production lot is quality assured after rework. A multi-delivery policy is used, wherein fixed quantity n installments of the finished lot are transported at fixed intervals during delivery time. The objective is to jointly determine the common production cycle time and the number of deliveries needed to minimize the long–term expected production–inventory–delivery costs for the problem. With the help of a mathematical model along with optimization technique, the optimal production–shipment policy is obtained. We have used a numerical example to demonstrate applicability of the result of our research. PMID:27918588

  12. Production inventory policies for defective items with inspection errors, sales return, imperfect rework process and backorders

    Science.gov (United States)

    Jaggi, Chandra K.; Khanna, Aditi; Kishore, Aakanksha

    2016-03-01

    In order to sustain the challenges of maintaining good quality and perfect screening process, rework process becomes a rescue to compensate for the imperfections present in the production system. The proposed model attempts to explore the existing real-life situation with a more practical approach by incorporating the concept of imperfect rework as this occurs as an unavoidable problem to the firm due to irreparable disorders even in the reworked items. Hence, a production inventory model is formulated here to study the combined effect of imperfect quality items, faulty inspection process and imperfect rework process on the optimal production quantity and optimal backorder level. An analytical method is employed to maximize the expected total profit per unit time. Moreover, the results of several previous research articles namely Chiu et al (2006), Chiu et al (2005), Salameh and Hayek (2001), and classical EPQ with shortages are deduced as special cases. To demonstrate the applicability of the model, and to observe the effects of key parameters on the optimal replenishment policy, a numerical example along with a comprehensive sensitivity analysis has been presented. The pertinence of the model can be found in most of the manufacturing industries like textile, electronics, furniture, footwear, plastics etc. A production lot size model has been explored for defectives items with inspection errors and an imperfect rework process.

  13. Characterizing and Modeling the Cost of Rework in a Library of Reusable Software Components

    Science.gov (United States)

    Basili, Victor R.; Condon, Steven E.; ElEmam, Khaled; Hendrick, Robert B.; Melo, Walcelio

    1997-01-01

    In this paper we characterize and model the cost of rework in a Component Factory (CF) organization. A CF is responsible for developing and packaging reusable software components. Data was collected on corrective maintenance activities for the Generalized Support Software reuse asset library located at the Flight Dynamics Division of NASA's GSFC. We then constructed a predictive model of the cost of rework using the C4.5 system for generating a logical classification model. The predictor variables for the model are measures of internal software product attributes. The model demonstrates good prediction accuracy, and can be used by managers to allocate resources for corrective maintenance activities. Furthermore, we used the model to generate proscriptive coding guidelines to improve programming, practices so that the cost of rework can be reduced in the future. The general approach we have used is applicable to other environments.

  14. The optimal manufacturing batch size with rework under time-varying demand process for a finite time horizon

    Science.gov (United States)

    Musa, Sarah; Supadi, Siti Suzlin; Omar, Mohd

    2014-07-01

    Rework is one of the solutions to some of the main issues in reverse logistic and green supply chain as it reduces production cost and environmental problem. Many researchers focus on developing rework model, but to the knowledge of the author, none of them has developed a model for time-varying demand rate. In this paper, we extend previous works and develop multiple batch production system for time-varying demand rate with rework. In this model, the rework is done within the same production cycle.

  15. It's time to Rework the Blueprints: Building a Science for Clinical Psychology

    Science.gov (United States)

    Millon, Theodore

    2003-01-01

    The aims in this article are to connect the conceptual structure of clinical psychological science to what the author believes to be the omnipresent principles of evolution, use the evolutionary model to create a deductively derived clinical theory and taxonomy, link the theory and taxonomy to comprehensive and integrated approaches to assessment,…

  16. A Nonpolynomial Optimal Algorithm for Sequencing Inspectors in a Repeat Inspection System with Rework

    Directory of Open Access Journals (Sweden)

    Moon Hee Yang

    2015-01-01

    Full Text Available Assuming that two types of inspection errors are nonidentical and that only the items rejected by an inspector are reworked and sent to the next inspection cycle, we formulate a combinatorial optimization problem for simultaneously determining both the minimum frequency of inspection-rework cycles and the optimal sequence of inspectors selected from a set of available inspectors, in order to meet the constraints of the outgoing quality level. Based on the inherent properties from our mathematical model, we provide a nonpolynomial optimal algorithm with a time complexity of O(2m.

  17. Building Social Web Applications

    CERN Document Server

    Bell, Gavin

    2009-01-01

    Building a web application that attracts and retains regular visitors is tricky enough, but creating a social application that encourages visitors to interact with one another requires careful planning. This book provides practical solutions to the tough questions you'll face when building an effective community site -- one that makes visitors feel like they've found a new home on the Web. If your company is ready to take part in the social web, this book will help you get started. Whether you're creating a new site from scratch or reworking an existing site, Building Social Web Applications

  18. Evaluate the system reliability for a manufacturing network with reworking actions

    International Nuclear Information System (INIS)

    Lin, Yi-Kuei; Chang, Ping-Chen

    2012-01-01

    To measure the system reliability of a manufacturing system with reworking actions is a crucial issue in industry, in which the system reliability could be one of the essential performance indicators to evaluate whether the manufacturing system is capable or not. In a manufacturing system, the input flow (raw materials/WIP) processed by each machine might be defective and thus the output flow (WIP/products) would be less than the input amount. Moreover, defective WIP/products are usually incentive to be reworked for reducing wasting and increasing output. Therefore, reworking actions are necessary to be considered in the manufacturing system. Based on the path concept, we revise such a manufacturing system as a stochastic-flow network in which the capacity of each machine is stochastic (i.e., multistate) due to the failure, partial failure, and maintenance. We decompose the network into one general processing path and several reworking paths. Subsequently, three algorithms for different network models are proposed to generate the lower boundary vector which affords to produce enough products satisfying the demand d. In terms of such a vector, the system reliability can be derived afterwards.

  19. 234Th/238U disequilibrium in near-shore sediment: particle reworking and diagenetic time scales

    International Nuclear Information System (INIS)

    Aller, R.C.; Cochran, J.K.

    1976-01-01

    The distribution of 234 Th (tsub(1.2)=24.1 days) in excess of its parent 238 U in the upper layers of near-shore sediment makes possible the evaluation of short-term sediment reworking and diagenetic rates. 234 Th has a maximum residence time in Long Island Sound water of 1.4 days. Seasonal measurement of 234 Th/ 238 U disequilibrium in sediment at a single station in central Long Island Sound demonstrates rapid particle reworking and high 234 Thsub(XS)(>1 dpm/g) in the upper 4 cm of sediment with slower, irregular reworking and low 234 Thsub(XS) to at least 12 cm. The rate of rapid particle reworking varies seasonally and is highest in the fall. The rapidly mixed zone is characterized by steep gradients in sediment chemistry implying fast reactions spanned by 234 Th decay time scales. 238 U is depleted in the upper mixed zone and shows addition in reducing sediment at depth. (Auth.)

  20. Evidence of reworked Cretaceous fossils and their bearing on the existence of Tertiary dinosaurs

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, J.G. (Museum of Northern Arizona, Flagstaff (USA)); Kirkland, J.I. (Univ. of Nebraska, Lincoln (USA)); Doi, K. (Univ. of Colorado, Boulder (USA))

    1989-06-01

    The Paleocene Shotgun fauna of Wyoming includes marine sharks as well as mammals. It has been suggested that the sharks were introduced from the Cannonball Sea. It is more likely that these sharks were reworked from a Cretaceous rock sequence that included both marine and terrestrial deposits as there is a mixture of marine and freshwater taxa. These taxa have not been recorded elsewhere after the Cretaceous and are not known from the Cannonball Formation. Early Eocene localities at Raven Ridge, Utah, similarly contain teeth of Cretaceous marine and freshwater fish, dinosaurs, and Eocene mammals. The Cretaceous teeth are well preserved, variably abraded, and serve to cast doubts on criteria recently used to claim that dinosaur teeth recovered from the Paleocene of Montana are not reworked. Another Eocene locality in the San Juan Basin has produced an Eocene mammalian fauna with diverse Cretaceous marine sharks. Neither the nature of preservation nor the degree of abrasion could be used to distinguish reworked from contemporaneous material. The mixed environments represented by the fish taxa and recognition of the extensive pre-Tertiary extinction of both marine and freshwater fish were employed to recognize reworked specimens.

  1. Consumer networks and firm reputation

    DEFF Research Database (Denmark)

    Tyran, Jean-Robert; Huck, Steffen; Lünser, Gabriele K.

    2010-01-01

    We examine the role of consumer networks in markets that suffer from moral hazard. Consumers exchange information with neighbors about past experiences with different sellers. Networks foster incentives for reputation building and enhance trust and efficiency in markets....

  2. Model Specification for Rework of Aircraft Engine, Power Transmission, and Accessory/Auxiliary Ball and Roller Bearings

    Science.gov (United States)

    Zaretsky, Erwin V.; Branzai, Emanuel V.

    2007-01-01

    This document provides a model specification for the rework and/or repair of bearings used in aircraft engines, helicopter main power train transmissions, and auxiliary bearings determined to be critical by virtue of performance, function, or availability. The rolling-element bearings to be processed under the provisions of this model specification may be used bearings removed after service, unused bearings returned from the field, or certain rejected bearings returned for reinspection and salvage. In commercial and military aircraft application, it has been a practice that rolling-element bearings removed at maintenance or overhaul be reworked and returned to service. Depending on the extent of rework and based upon theoretical analysis, representative life factors (LF) for bearings subject to rework ranged from 0.87 to 0.99 the lives of new bearings. Based on bearing endurance data, 92 percent of the bearing sets that would be subject to rework would result in L(sub 10) lives equaling and/or exceeding that predicted for new bearings. The remaining 8 percent of the bearings have the potential to achieve the analytically predicted life of new bearings when one of the rings is replaced at rework. The potential savings from bearing rework varies from 53 to 82 percent of that of new bearings depending on the cost, size, and complexity of the bearing

  3. Rework Impacts Evaluation Through System Dynamics Approach in Overlapped Product Development Schedule

    Directory of Open Access Journals (Sweden)

    Lino Guimarães Marujo

    2009-07-01

    Full Text Available This work aims to explore a novel framework to analyze the planning concepts in product development projects employing techniques to reduce the lead-time of activities, such as overlapping of a pair of each. With the System Dynamics methodology a model to evaluate the rework fraction needed to accommodate the deviations proportional to the overlapping grade of the activities. A numerical example is provided to demonstrate the validity of the model. Although problems encountered during the project management are dynamic, they have been treated on a static basis, what has as result, chronic schedules delays, overruns and cost overspent persist in follow the managers’ (reactions. In this work, we have addressed this known problem by introducing and reviewing some characteristics of the concept of rework in overlapped schedules. This consists in observe and capture the relations feedbacks among the original planned project schedule, the overlapping strategy and the inherent uncertainty in a work being done with poor information. To realize this concept, we have faced with many behaviors patterns (e.g. rework, new duration, non-conformity, and analyze the output behavior pattern, produced by the proposed model.

  4. Coral-rubble ridges as dynamic coastal features - short-term reworking and weathering processes

    Science.gov (United States)

    Spiske, Michaela

    2016-02-01

    A coral-rubble ridge built by storm waves at Anegada (British Virgin Islands) underwent remarkable changes in shape and weathering in a 23-month period. The ridge is located along the island's north shore, in the lee of a fringing reef and a reef flat. This coarse-clast ridge showed two major changes between March 2013, when first examined, and February 2015, when revisited. First, a trench dug in 2013, and intentionally left open for further examination, was found almost completely infilled in 2015, and the ridge morphology was modified by slumping of clasts down the slope and by reworking attributable to minor storm waves. In size, composition and overall condition, most of the clasts that filled the trench resemble reworked clasts from the ridge itself; only a small portion had been newly brought ashore. Second, a dark gray patina formed on the whitish exteriors of the carbonate clasts that had been excavated in 2013. These biologically weathered, darkened clasts had become indistinguishable from clasts that had been at the ridge surface for a much longer time. The findings have two broader implications. First, coastal coarse-clast ridges respond not solely to major storms, but also to tropical storms or minor hurricanes. The modification and reworking of the ridge on Anegada most probably resulted from hurricane Gonzalo which was at category 1-2 as it passed about 60 km north of the island in October 2014. Second, staining of calcareous clasts by cyanobacteria in the supralittoral zone occurs within a few months. In this setting, the degree of darkening quickly saturates as a measure of exposure age.

  5. Imperfect Reworking Process Consideration in Integrated Inventory Model under Permissible Delay in Payments

    Directory of Open Access Journals (Sweden)

    Ming-Cheng Lo

    2008-01-01

    Full Text Available This study develops an improved inventory model to help the enterprises to advance their profit increasing and cost reduction in a single vendor single-buyer environment with general demand curve, adjustable production rate, and imperfect reworking process under permissible delay in payments. For advancing practical use in a real world, we are concerned with the following strategy determining, which includes the buyer's optimal selling price, order quantity, and the number of shipments per production run from the vendor to the buyer. An algorithm and numerical analysis are used to illustrate the solution procedure.

  6. CONSUMER BEHAVIOR

    Directory of Open Access Journals (Sweden)

    Ilie BUDICA

    2010-03-01

    Full Text Available The study of consumers helps firms and organizations improve their marketing strategies by understanding issues such as: the psychology of how consumers think, feel, reason, and select between different alternatives; the psychology of how the consumer is influenced by his or her environment; the behavior of consumers while shopping or making other marketing decisions; limitations in consumer knowledge or information processing abilities influence decisions and marketing outcome; how consumer motivation and decision strategies differ between products that differ in their level of importance or interest that they entail for the consumer; and how marketers can adapt and improve their marketing campaigns and marketing strategies to more effectively reach the consumer.

  7. Economic production quantity concerning learning and the reworking of imperfect items

    Directory of Open Access Journals (Sweden)

    Tsai Deng-Maw

    2012-01-01

    Full Text Available The classical economic production quantity (EPQ model assumes that items produced are of perfect quality and the production rate is constant. However, production quality depends on the condition of the process. Due to process deterioration or other factors, the production process may shift and produce imperfect quality items. These imperfect quality items sometimes can be reworked and repaired; hence, overall production-inventory costs can be reduced significantly. In addition, it can be found in practice that the time or cost required to repetitively produce a unit of a product decreases when the number of units produced by a worker or a group of workers increases. Under this circumstance, the unit production cost cannot be regarded as constant and, therefore, cannot be ignored when taking account of the total cost. This paper incorporates the effects of learning and the reworking of defective items on the EPQ model since they were not considered in existing models. An optimal operation policy that minimizes the expected total cost per unit time is derived. A numerical example is provided to illustrate the proposed model. In addition, sensitivity analysis is performed and discussed.

  8. Sand wave fields beneath the Loop Current, Gulf of Mexico: Reworking of fan sands

    Science.gov (United States)

    Kenyon, Neil H.; Akhmetzhanov, A.M.; Twichell, D.C.

    2002-01-01

    Extensive fields of large barchan-like sand waves and longitudinal sand ribbons have been mapped by deep-towed SeaMARC IA sidescan sonar on part of the middle and lower Mississippi Fan that lies in about 3200 m of water. The area is beneath the strongly flowing Loop Current. The bedforms have not been adequately sampled but probably consist of winnowed siliciclastic-foraminiferal sands. The size (about 200 m from wingtip to wingtip) and shape of the large barchans is consistent with a previously observed peak current speed of 30 cm/s, measured 25 m above the seabed. The types of small-scale bedforms and the scoured surfaces of chemical crusts, seen on nearby bottom photographs, indicate that near-bed currents in excess of 30 cm/s may sometimes occur. At the time of the survey the sand transport direction was to the northwest, in the opposite direction to the Loop Current but consistent with there being a deep boundary current along the foot of the Florida Escarpment. Some reworking of the underlying sandy turbidites and debris flow deposits is apparent on the sidescan sonar records. Reworking by deep-sea currents, resulting in erosion and in deposits characterised by coarsening upwards structures and cross-bedding, is a process that has been proposed for sand found in cores in shallower parts of the Gulf of Mexico. This process is more widespread than hitherto supposed. 

  9. CONSUMER BEHAVIOR

    OpenAIRE

    Ilie BUDICA; Silvia PUIU; Bogdan Andrei BUDICA

    2010-01-01

    The study of consumers helps firms and organizations improve their marketing strategies by understanding issues such as: the psychology of how consumers think, feel, reason, and select between different alternatives; the psychology of how the consumer is influenced by his or her environment; the behavior of consumers while shopping or making other marketing decisions; limitations in consumer knowledge or information processing abilities influence decisions and marke...

  10. Mathematical modeling of a multi-product EMQ model with an enhanced end items issuing policy and failures in rework.

    Science.gov (United States)

    Chiu, Yuan-Shyi Peter; Sung, Peng-Cheng; Chiu, Singa Wang; Chou, Chung-Li

    2015-01-01

    This study uses mathematical modeling to examine a multi-product economic manufacturing quantity (EMQ) model with an enhanced end items issuing policy and rework failures. We assume that a multi-product EMQ model randomly generates nonconforming items. All of the defective are reworked, but a certain portion fails and becomes scraps. When rework process ends and the entire lot of each product is quality assured, a cost reduction n + 1 end items issuing policy is used to transport finished items of each product. As a result, a closed-form optimal production cycle time is obtained. A numerical example demonstrates the practical usage of our result and confirms a significant savings in stock holding and overall production costs as compared to that of a prior work (Chiu et al. in J Sci Ind Res India, 72:435-440 2013) in the literature.

  11. Mundane science use in a practice theoretical perspective: Different understandings of the relations between citizen-consumers and public communication initiatives build on scientific claims.

    Science.gov (United States)

    Halkier, Bente

    2015-08-13

    Public communication initiatives play a part in placing complicated scientific claims in citizen-consumers' everyday contexts. Lay reactions to scientific claims framed in public communication, and attempts to engage citizens, have been important subjects of discussion in the literatures of public understanding and public engagement with science. Many of the public communication initiatives, however, address lay people as consumers rather than citizens. This creates specific challenges for understanding public engagement with science and scientific citizenship. The article compares five different understandings of the relations between citizen-consumers and public issue communication involving science, where the first four types are widely represented in the Public Understanding of Science discussions. The fifth understanding is a practice theoretical perspective. The article suggests how the public understanding of and engagement in science literature can benefit from including a practice theoretical approach to research about mundane science use and public engagement. © The Author(s) 2015.

  12. The distribution of the electric energy consumed in the World Trade Center building; La distribucion de la energia electrica consumida en el edificio World Trade Center

    Energy Technology Data Exchange (ETDEWEB)

    Gaona de la Fuente, Alvaro; Carrillo Borja, Angel [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

    1997-12-31

    This document describes the distribution of the electric energy in the World Trade Center building. Also called the Business International Capital, it is a modern international concept that integrates under the same roof services and supports required by the foreign commerce, with a great 50 stories high building, information network, a business center, a commercial center, an international center for exhibits and conventions and a luxury hotel. It is a modern building equipped with a numberless technological advancements an a total installed electrical load of 35000 kVA. The distribution structures utilized for high buildings are described, the structure that was decided to adopt in the World Trade Center, the requirement for the execution of the distribution electric work, the Luz y Fuerza installations in the buildings conglomerate, the operation and maintenance of the distribution network of this building and the basic needs for new installations of this type of buildings [Espanol] En el presente documento se describe la distribucion de la energia electrica del edificio World Trade Center de la ciudad de Mexico. Llamado tambien la capital internacional de los negocios es un moderno concepto internacional que integra bajo un mismo techo servicios y apoyos que se requieren para el comercio exterior contando con una gran torre de 50 pisos, red de informacion, un centro de negocios, un centro comercial, un centro internacional de exposiciones y convenciones y un hotel de lujo. Es un edificio moderno equipado con un sinnumero de adelantos tecnologicos y con una carga total instalada de 35000 kVA. Se describen las estructuras de distribucion utilizadas en edificios altos, la estructura que se decidio implantar en el World Trade Center, los requerimientos para la ejecucion de la obra electrica de distribucion, las instalaciones de Luz y Fuerza en el conjunto de dicho edificio, la operacion y mantenimiento de la red de distribucion de este edificio, y las necesidades

  13. Re-working biographies: Women's narratives of pregnancy whilst living with epilepsy.

    Science.gov (United States)

    Weckesser, Annalise; Denny, Elaine

    2017-07-01

    This paper explores the multiple ways experiences of pregnancy and early motherhood come to 'rework' the biographies of women living with epilepsy. Pregnancy is explored as a temporarily concurrent status alongside the long-term condition of epilepsy. Narrative interviews were conducted with 32 women from across the UK. Analysis of these narratives suggests that biographical disruption and continuity are both useful in the conceptualisation of women's diverse experiences of pregnancy and epilepsy. Such findings challenge the notion that the presence of a condition over a long period of time leads to the normalisation of illness. Participants' narratives demonstrate that, for some, pregnancy and early motherhood may be disruptive and can raise concerns regarding an ever present condition that may previously have been taken for granted. Findings also indicate the need for a greater consideration of gender and care responsibilities, as well explorations of concomitant conditions, in the theorising of biographies and chronic illness. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. [Support for Adult ASD in Medical Rework Program: Mutual Communication Program and Psychodrama].

    Science.gov (United States)

    Yokoyama, Motonori

    2015-01-01

    While carrying out the Medical Rework Program, we realized the necessity for a supplementary medical treatment program aimed at adult ASD. Consequently, we started the Mutual Communication Program, which consists of standard SST and the new element of psychodrama. As a result, 32 participants have returned to their workplace in the three-year period, and the rate of successfully continuing to work was 93.8% at the time of the investigation. Various psychological tests also indicated significant improvement. In this article, we present a case study, explain psychodrama techniques employed in the program, and discuss their usefulness. The results suggest that psychodrama is a very effective assistive technique when the characteristics of ASD are taken into consideration.

  15. Maximising profits for an EPQ model with unreliable machine and rework of random defective items

    Science.gov (United States)

    Pal, Brojeswar; Sankar Sana, Shib; Chaudhuri, Kripasindhu

    2013-03-01

    This article deals with an economic production quantity (EPQ) model in an imperfect production system. The production system may undergo in 'out-of-control' state from 'in-control' state, after a certain time that follows a probability density function. The density function varies with reliability of the machinery system that may be controlled by new technologies, investing more costs. The defective items produced in 'out-of-control' state are reworked at a cost just after the regular production time. Occurrence of the 'out-of-control' state during or after regular production-run time is analysed and also graphically illustrated separately. Finally, an expected profit function regarding the inventory cost, unit production cost and selling price is maximised analytically. Sensitivity analysis of the model with respect to key parameters of the system is carried out. Two numerical examples are considered to test the model and one of them is illustrated graphically.

  16. New residence times of the Holocene reworked shells on the west coast of Bohai Bay, China

    Science.gov (United States)

    Shang, Zhiwen; Wang, Fu; Li, Jianfen; Marshall, William A.; Chen, Yongsheng; Jiang, Xingyu; Tian, Lizhu; Wang, Hong

    2016-01-01

    Shelly cheniers and shell-rich beds found intercalated in near-shore marine muds and sandy sediments can be used to indicate the location of ancient shorelines, and help to estimate the height of sea level. However, dating the deposition of material within cheniers and shell-rich beds is not straightforward because much of this material is transported and re-worked, creating an unknown temporal off-set, i.e., the residence time, between the death of a shell and its subsequent entombment. To quantify the residence time during the Holocene on a section of the northern Chinese coastline a total 47 shelly subsamples were taken from 17 discrete layers identified on the west coast of Bohai Bay. This material was AMS 14C dated and the calibrated ages were systematically compared. The subsamples were categorized by type as articulated and disarticulated bivalves, gastropod shells, and undifferentiated shell-hash. It was found that within most individual layers the calibrated ages of the subsamples got younger relative to the amount of apparent post-mortem re-working the material had been subject to. For examples, the 14C ages of the bivalve samples trended younger in this order: shell-hash → split shells → articulated shells. We propose that the younger subsample age determined within an individual layer will be the closest to the actual depositional age of the material dated. Using this approach at four Holocene sites we find residence times which range from 100 to 1260 cal yrs, with two average values of 600 cal yrs for the original 14C dates older than 1 ka cal BP and 100 cal yrs for the original 14C dates younger than 1 ka cal BP, respectively. Using this semi-empirical estimation of the shell residence times we have refined the existing chronology of the Holocene chenier ridges on the west coast of Bohai Bay.

  17. Role of consumer referrals in decision making and their role in building online brand communities- Case study 50cycles.com

    OpenAIRE

    Khandelwal, Nikita

    2011-01-01

    Abstract The advent of the World Wide Web has changed completely, the way companies communicate with customers. It is no longer a one way communication, the consumer is heard loud and clear through social media like Facebook, Twitter, review websites, blogs etc. Social media has turned the customer-company relationship on its head. Before doing business with a company, customers research about them using the social media. It is easier to trust one’s peers then to rely on company generated...

  18. Fact Sheets and Questions and Answers for the Final Air Toxics Rules for the Aerospace Manufacturing and Rework Industry

    Science.gov (United States)

    This page contains the July 1995 final rule fact sheet and the January 2015 proposed rule fact sheet that contains information on the National Emission Standards for Aerospace Manufacturing and Rework Facilities, as well as a 2001 Q&A document on the rule

  19. An economic production model for deteriorating items and time dependent demand with rework and multiple production setups

    Science.gov (United States)

    Uthayakumar, R.; Tharani, S.

    2017-12-01

    Recently, much emphasis has given to study the control and maintenance of production inventories of the deteriorating items. Rework is one of the main issues in reverse logistic and green supply chain, since it can reduce production cost and the environmental problem. Many researchers have focused on developing rework model, but few of them have developed model for deteriorating items. Due to this fact, we take up productivity and rework with deterioration as the major concern in this paper. In this paper, a production-inventory model with deteriorative items in which one cycle has n production setups and one rework setup (n, 1) policy is considered for deteriorating items with stock-dependent demand in case 1 and exponential demand in case 2. An effective iterative solution procedure is developed to achieve optimal time, so that the total cost of the system is minimized. Numerical and sensitivity analyses are discussed to examine the outcome of the proposed solution procedure presented in this research.

  20. A Model to Investigate the Effect of Work Ethic Culture on Dynamics of Rework in Management of Projects

    Directory of Open Access Journals (Sweden)

    Hossein Kiani

    2018-03-01

    Full Text Available The present study aims to investigate the effect of work ethic culture on rework in construction projects through a review of literature, surveys, and interviews with project managers. The main research question is what mechanisms can project manager use to balance the costs of personnel training, financial and language incentives, and implementation costs to finish the project with more profit and less rework. In this regard, modelling and data analysis is done using System Dynamics methodology. The results show that by considering work ethic, rework in the project is reduced from 46 % to 39 %. However, the project has been completed with 10 % lower cost and 26 % lower variance. Integrating the issue of rework with the culture of work ethic in the field of project management by at least one exogenous parameter has been studied, while in this study qualitative parameters have been converted to quantitative parameters using fuzzy inference system. The change in management approach to the issue of work ethics and the formulation of human resource strategies of large projects by human resource managers is one of the applications of this study.

  1. Multi-item economic production quantity model for imperfect items with multiple production setups and rework under the effect of preservation technology and learning environment

    Directory of Open Access Journals (Sweden)

    Preeti Jawla

    2016-09-01

    Full Text Available This study aims to investigate the multi-item inventory model in a production/rework system with multiple production setups. Rework can be depicted as the transformation of production rejects, failed, or non-conforming items into re-usable products of the same or lower quality during or after inspection. Rework is very valuable and profitable, especially if materials are limited in availability and also pricey. Moreover, rework can be a good contribution to a ‘green image environment’. In this paper, we establish a multi-item inventory model to determine the optimal inventory replenishment policy for the economic production quantity (EPQ model for imperfect, deteriorating items with multiple productions and rework under inflation and learning environment. In inventory modelling, Inflation plays a very important role. In one cycle, production system produces items in n production setups and one rework setup, i.e. system follows (n, 1 policy. To reduce the deterioration of products preservation technology investment is also considered in this model. Holding cost is taken as time dependent. We develop expressions for the average profit per time unit, including procurement of input materials, costs for production, rework, deterioration cost and storage of serviceable and reworkable lots. Using those expressions, the proposed model is demonstrated numerically and the sensitivity analysis is also performed to study the behaviour of the model.

  2. Consumer response to packaging design

    NARCIS (Netherlands)

    Steenis, Nigel D.; Herpen, van Erica; Lans, van der Ivo A.; Ligthart, Tom N.; Trijp, van Hans C.M.

    2017-01-01

    Building on theories of cue utilization, this paper investigates whether and how packaging sustainability influences consumer perceptions, inferences and attitudes towards packaged products. A framework is tested in an empirical study among 249 students using soup products varying in packaging

  3. Consumer Generated Advertising and Brand Trust in The Consumer Experience

    OpenAIRE

    Reeves, C

    2010-01-01

    Increasing media clutter now exposes consumers to thousands of commercial messages every day (Gritten, 2007). The advent of the internet and technology over the past twenty years now means consumer-generated media such as blogs, podcasts, and online social networking sites are a further source (Gritten, 2007). Building brand trust remains, now more than ever, crucial to corporate marketers, in a world where consumers are losing faith in traditional marketing strategies. Social media has give...

  4. Consumer Finance

    OpenAIRE

    Peter Tufano

    2009-01-01

    Although consumer finance is a substantial element of the economy, it has had a smaller footprint within financial economics. In this review, I suggest a functional definition of the subfield of consumer finance, focusing on four key functions: payments, risk management, moving funds from today to tomorrow (saving/investing), and from tomorrow to today (borrowing). I provide data showing the economic importance of consumer finance in the American economy. I propose a historical explanation fo...

  5. Feasibility study on data collection in the 'Electricity' programme, consumer categories: lighting, building technical services, mobility, applications in trade, various special applications

    International Nuclear Information System (INIS)

    Huser, A.; Schaltegger, B.; Baumgartner, W.

    2000-01-01

    To improve the data situation, and as a management instrument, the Swiss Federal Office of Energy wants to create a quantitative overview of the consumption of electrical energy. In a feasibility study carried out for this purpose, the current data situation was investigated and it showed in which range of applications and at what cost detailed information could be gathered. The investigation is part of a comprehensive study concerning the opportunities for improvement of the electrical energy statistics. In principle, the entire electrical energy consumption of Switzerland will be covered. This report embraces the household equipment, entertainment electronic equipment, office and communications equipment and the industrial consumer groups. In various sectors, survey and calculation models can be supplied that provide data of a high quality. It can be shown that a massive improvement in the data situation, compared to the current situation, can be achieved at a moderate cost. In the case of household equipment, entertainment electronic equipment and office and communications equipment, good quality data can be ascertained with a bottom-up estimate. Various empirical studies, as well as the linking of this data, are necessary for this. Because of the complexity and diversity of equipment in the industrial consumer group, other methodological estimates will be proposed. (author)

  6. Women as Video Game Consumers

    OpenAIRE

    Kiviranta, Hanna

    2017-01-01

    The purpose of this Thesis is to study women as video game consumers through the games that they play. This was done by case studies on the content of five video games from genres that statistically are popular amongst women. To introduce the topic and to build the theoretical framework, the key terms and the video game industry are introduced. The reader is acquainted with theories on consumer behaviour, buying processes and factors that influence our consuming habits. These aspects are...

  7. Consumer Fetish

    DEFF Research Database (Denmark)

    Arnould, Eric; Cayla, Julien

    2015-01-01

    in the organizational fetishization of consumers, that is, how in the process of understanding and managing markets, a quasimagical fascination with amalgams of consumer voices, images, and artefacts comes about. We offer several contributions. First, we demonstrate the pertinence of (primarily anthropological...

  8. Consumer perception of bread quality.

    Science.gov (United States)

    Gellynck, Xavier; Kühne, Bianka; Van Bockstaele, Filip; Van de Walle, Davy; Dewettinck, Koen

    2009-08-01

    Bread contains a wide range of important nutritional components which provide a positive effect on human health. However, the consumption of bread is declining during the last decades. This is due to factors such as changing eating patterns and an increasing choice of substitutes like breakfast cereals and fast foods. The aim of this study is to investigate consumer's quality perception of bread towards sensory, health and nutrition attributes. Four consumer segments are identified based on these attributes. The different consumer segments comprise consumers being positive to all three quality aspects of bread ("enthusiastic") as wells as consumers perceiving bread strongly as "tasteless", "non-nutritious" or "unhealthy". Moreover, factors are identified which influence the consumers' quality perception of bread. The results of our study may help health professionals and policy makers to systematically inform consumers about the positive effects of bread based on its components. Furthermore, firms can use the results to build up tailor-made marketing strategies.

  9. Consumer perceptions

    DEFF Research Database (Denmark)

    Ngapo, T. M.; Dransfield, E.; Martin, J. F.

    2004-01-01

    Consumer focus groups in France, England, Sweden and Denmark were used to obtain insights into the decision-making involved in the choice of fresh pork and attitudes towards today's pig production systems. Many positive perceptions of pork meat were evoked. Negative images of the production systems...... that there was no link between the negative images of production methods and their purchase behaviour. The groups were clearly confused and mistrusted the limited information available at the point of purchase. Careful consideration should be given to meat labelling, in particular taking account of the evident consumer...... ethnocentrism, to assure that such information is targeted to enhance consumer confidence....

  10. Consumer Neoteny

    Directory of Open Access Journals (Sweden)

    Mathieu Alemany Oliver

    2016-07-01

    Full Text Available This research explores childlike consumer behavior from an evolutionary perspective. More specifically, it uses the concept of neoteny to show that the retention of ancestors’ juvenile characteristics is related to specific behaviors. The results of factor analyses conducted on a UK sample (n = 499 and a French sample (n = 292 7 years later indicate four dimensions of childlike consumer behavior, namely, stimulus seeking, reality conflict, escapism, and control of aggression.

  11. Clustering consumers based on trust, confidence and giving behaviour: data-driven model building for charitable involvement in the Australian not-for-profit sector.

    Science.gov (United States)

    de Vries, Natalie Jane; Reis, Rodrigo; Moscato, Pablo

    2015-01-01

    Organisations in the Not-for-Profit and charity sector face increasing competition to win time, money and efforts from a common donor base. Consequently, these organisations need to be more proactive than ever. The increased level of communications between individuals and organisations today, heightens the need for investigating the drivers of charitable giving and understanding the various consumer groups, or donor segments, within a population. It is contended that `trust' is the cornerstone of the not-for-profit sector's survival, making it an inevitable topic for research in this context. It has become imperative for charities and not-for-profit organisations to adopt for-profit's research, marketing and targeting strategies. This study provides the not-for-profit sector with an easily-interpretable segmentation method based on a novel unsupervised clustering technique (MST-kNN) followed by a feature saliency method (the CM1 score). A sample of 1,562 respondents from a survey conducted by the Australian Charities and Not-for-profits Commission is analysed to reveal donor segments. Each cluster's most salient features are identified using the CM1 score. Furthermore, symbolic regression modelling is employed to find cluster-specific models to predict `low' or `high' involvement in clusters. The MST-kNN method found seven clusters. Based on their salient features they were labelled as: the `non-institutionalist charities supporters', the `resource allocation critics', the `information-seeking financial sceptics', the `non-questioning charity supporters', the `non-trusting sceptics', the `charity management believers' and the `institutionalist charity believers'. Each cluster exhibits their own characteristics as well as different drivers of `involvement'. The method in this study provides the not-for-profit sector with a guideline for clustering, segmenting, understanding and potentially targeting their donor base better. If charities and not

  12. Clustering consumers based on trust, confidence and giving behaviour: data-driven model building for charitable involvement in the Australian not-for-profit sector.

    Directory of Open Access Journals (Sweden)

    Natalie Jane de Vries

    Full Text Available Organisations in the Not-for-Profit and charity sector face increasing competition to win time, money and efforts from a common donor base. Consequently, these organisations need to be more proactive than ever. The increased level of communications between individuals and organisations today, heightens the need for investigating the drivers of charitable giving and understanding the various consumer groups, or donor segments, within a population. It is contended that `trust' is the cornerstone of the not-for-profit sector's survival, making it an inevitable topic for research in this context. It has become imperative for charities and not-for-profit organisations to adopt for-profit's research, marketing and targeting strategies. This study provides the not-for-profit sector with an easily-interpretable segmentation method based on a novel unsupervised clustering technique (MST-kNN followed by a feature saliency method (the CM1 score. A sample of 1,562 respondents from a survey conducted by the Australian Charities and Not-for-profits Commission is analysed to reveal donor segments. Each cluster's most salient features are identified using the CM1 score. Furthermore, symbolic regression modelling is employed to find cluster-specific models to predict `low' or `high' involvement in clusters. The MST-kNN method found seven clusters. Based on their salient features they were labelled as: the `non-institutionalist charities supporters', the `resource allocation critics', the `information-seeking financial sceptics', the `non-questioning charity supporters', the `non-trusting sceptics', the `charity management believers' and the `institutionalist charity believers'. Each cluster exhibits their own characteristics as well as different drivers of `involvement'. The method in this study provides the not-for-profit sector with a guideline for clustering, segmenting, understanding and potentially targeting their donor base better. If charities and not

  13. Hillslope failure and paraglacial reworking of sediments in response to glacier retreat, Fox Valley, New Zealand.

    Science.gov (United States)

    McColl, Samuel T.; Fuller, Ian C.; Anderson, Brian; Tate, Rosie

    2017-04-01

    Climate and glacier fluctuations influence sediment supply to glacier forelands, which in turn influences down-valley hazards to infrastructure and tourism within glacier forelands. At Fox Glacier, one of New Zealand's most iconic and popular glaciers, rapid retreat has initiated a range of hillslope and valley floor responses, that present a cascade of hazards and changes that need to be carefully managed. Fox Glacier has retreated many kilometres historically, with 2.6 km of retreat since the mid-20th century, and a phase of rapid retreat of 50-340 m per year since 2009. To study the system response to past and ongoing glacial retreat at the Fox valley, morphological changes are being observed using time-lapse photography and the annual collection of high-resolution digital elevation models (DEMs) and orthophoto mosaics. The DEMs are being produced using Structure from Motion photogrammetry from UAV/RPAS and helicopter platforms, and are being used, along with manual ground surveying, to produce ground surface change models (DoDs; DEMs of Difference) and sediment budgets for the valley. Results from time-lapse photography and DoDs show that glacial retreat has initiated destabilisation and (mostly chronic) mass movement of surficial glacial sediments on the valley slopes near the glacier terminus. Alluvial fans farther down valley are actively growing, reworking glacial and landslide sediments from tributary catchments. These paraglacial sediments being delivered to the proglacial river from the glacier terminus and alluvial fans are driving aggradation of the valley floor of decimetres to metres per year and maintaining a highly dynamic braid plain. Valley floor changes also include the melting of buried dead ice, which are causing localised subsidence at the carpark and one of the alluvial fans. The unstable slopes and active debris fans, aggrading and highly active river channel, ground subsidence, add to the spectacle but also the hazards of the Fox valley

  14. National Emission Standards for Aerospace Manufacturing and Rework Facilities: Summary of Requirements for Implementing the National Emission Standards for Hazardous Air Pollutants (NESHAP)

    Science.gov (United States)

    This summary of implementation requirements document for the Aerospace Manufacturing and Rework facilties NESHAP was originally prepared in August 1997, but it was updated in January 2001 with a new amendments update.

  15. Consumer Networks and Firm Reputation

    DEFF Research Database (Denmark)

    Huck, Steffen; Lünser, Gabriele K.; Tyran, Jean-Robert

    Arguing that consumers are the carriers of firms' reputations, we examine the role of consumer networks for trust in markets that suffer from moral hazard. When consumers are embedded in a network, they can exchange information with their neighbours about their private experiences with different ...... sellers. We find that such information exchange fosters firms' incentives for reputation building and, thus, enhances trust and efficiency in markets. This efficiency-enhancing effect is already achieved with a rather low level of network density......Arguing that consumers are the carriers of firms' reputations, we examine the role of consumer networks for trust in markets that suffer from moral hazard. When consumers are embedded in a network, they can exchange information with their neighbours about their private experiences with different...

  16. Consumer Behavior

    NARCIS (Netherlands)

    Hoyer, W.D.; MacInnis, D.J.; Pieters, R.

    2013-01-01

    CONSUMER BEHAVIOR combines a foundation in key concepts from marketing, psychology, sociology, and anthropology with a highly practical focus on real-world applications for today's business environment. The new edition of this popular, pioneering text incorporates the latest cutting-edge research

  17. Consumer Trust in E-commerce

    OpenAIRE

    Gustavsson, Malin; Johansson, Anne-Marie

    2006-01-01

    An often mentioned reason for consumers not purchasing from Internet vendors, is the lack of trust. The lack of physical clues and physical interaction in the online environment make it more difficult to establish trust with the consumers. So, it is important for companies to learn how to manage consumers’ trust in e-commerce. Although, building consumer trust on the Internet is a challenge for online vendors. The purpose with this dissertation was to get a better understanding of consumer t...

  18. EPQ model for imperfect production processes with rework and random preventive machine time for deteriorating items and trended demand

    Directory of Open Access Journals (Sweden)

    Shah Nita H.

    2015-01-01

    Full Text Available Economic production quantity (EPQ model has been analyzed for trended demand, and units in inventory are subject to constant rate. The system allows rework of imperfect units, and preventive maintenance time is random. A search method is used to study the model. The proposed methodology is validated by a numerical example. The sensitivity analysis is carried out to determine the critical model parameters. It is observed that the rate of change of demand, and the deterioration rate have a significant impact on the decision variables and the total cost of an inventory system. The model is highly sensitive to the production and demand rate.

  19. Mathematical modeling for exploring the effects of overtime option, rework, and discontinuous inventory issuing policy on EMQ model

    Directory of Open Access Journals (Sweden)

    Singa Wang Chiu

    2018-09-01

    Full Text Available This study employs mathematical modeling to explore the effects of overtime option, rework, and discontinuous end-item issuing policy on the economic manufacturing quantity (EMQ model. Conventional EMQ model assumed that all products fabricated are of good quality and are issued under continuous policy. In real world, however, nonconforming items are randomly produced, due to diverse unexpected factors in fabrication process. When finished items are to be distributed to outside locations, discontinuous multi-shipment policy is often used rather than continuous rule. In addition, with the intention of increasing short-term capacity or shortening replenishment cycle length to smooth the production planning, adopting overtime option can be an effective strategy. To cope with the aforementioned features in real production systems, this study incorporates overtime option, rework, and multi-shipment policy into the EMQ model and explores their joint effects on optimal lot size and number of shipments, and on other relevant system parameters. Mathematical modeling and Hessian matrix equations enable us to derive the optimal policies to the problem. Through the use of numerical example, the applicability of research result is exhibited and a variety of significant effects of these features on the proposed system are revealed.

  20. Consumer Behavior

    OpenAIRE

    Tatiana Bass

    2011-01-01

    This article reviews the role played by a producer of goods and services in consumer life. But because the manufacturer can achieve its purpose, to obtain profit and to attract more clients, he needs to know the consumer’s needs and preferences. Equally important for the producer is to find solutions for his products and services to be developed in conditions of maximum efficiency and become more aware of why they are buying, find out who, what, from where, when, how and how much to buy and h...

  1. Consumer Issues and Consumer Protection in Asia.

    Science.gov (United States)

    Widdows, Richard; And Others

    1995-01-01

    Looks at themes of consumer interests in Asia and comments on the directions consumer policy is taking in that region. Outlines issues facing the region's consumers, describes evolving consumer protection mechanisms, and presents a model for promoting consumer interests in the region. (JOW)

  2. Building Bridges

    DEFF Research Database (Denmark)

    The report Building Bridges adresses the questions why, how and for whom academic audience research has public value, from the different points of view of the four working groups in the COST Action IS0906 Transforming Audiences, Transforming Societies – “New Media Genres, Media Literacy and Trust...... in the Media”, “Audience Interactivity and Participation”, “The Role of Media and ICT Use for Evolving Social Relationships” and “Audience Transformations and Social Integration”. Building Bridges is the result of an ongoing dialogue between the Action and non-academic stakeholders in the field of audience......, Brian O’Neill, Andra Siibak, Sascha Trültzsch-Wijnen, Nicoletta Vittadini, Igor Vobič and Frauke Zeller. Stakeholder feedback from: Michelle Arlotta (DeAgostini), Andreea M. Costache (Association of Consumers of Audiovisual Media in Catalonia/TAC), Francesco Diasio (AMARC Europe), Marius Dragomir (Open...

  3. The Meaning of Happiness in Consumer Research

    DEFF Research Database (Denmark)

    Brandi Sørensen, Elin; Uth Thomsen, Thyra

    2016-01-01

    In this study we investigate the meaning of happiness in a consumption context. We employ an inductive approach and present the results of an exploratory pilot study with eight consumers. The study is based on a Multi-Sensory-Sculpting (MSS) procedure in which we asked consumers to build sculptures...... that represent consumer happiness. Following the MSS guidelines, consumers were interviewed about the meanings of their sculpture in order to elicit embodied cognition about the topic at hand. In this paper we present the meanings of consumer happiness in the participants‟ accounts and discuss implications...... for consumer research. Further, we discuss the applicability of the MSS-procedure to the topic of consumer happiness, and how to optimize it for later studies on consumer happiness....

  4. Rates of sediment reworking at the HEBBLE site based on measurements of Th-234, Cs-137 and Pb-210

    International Nuclear Information System (INIS)

    DeMaster, D.J.; McKee, B.A.; Nittrouer, C.A.; Brewster, D.C.; Biscaye, P.E.

    1985-01-01

    Th-234, Cs-137 and Pb-210 measurements have been made on ten cores from the HEBBLE site on the Nova Scotian continental rise. Th-234 mixing coefficients from HEBBLE sediments show substantial lateral variability with values ranging from 1 to 33 cm 2 yr -1 . These mixing coefficients are one to two orders of magnitude greater than values from typical continental-rise and abyssal sediments because of high densities of benthic macrofauna. Th-234 data from HEBBLE cores indicate that particles at the sediment-water interface are mixed to depths of 1-5 cm on a 100-day time scale. Cs-137 and Pb-210 data indicate that on time scales of 30-100 yrs surface sediments are reworked to depths ranging from 1 to 12 cm. Based on Th-234 profiles from two HEBBLE cores collected less than 200 m apart during consecutive years, no temporal variability in mixing rate could be resolved. (Auth.)

  5. REDUCING REJECTION/REWORK IN PRESSURE DIE CASTING PROCESS BY APPLICATION OF DMAIC METHODOLOGY OF SIX SIGMA

    Directory of Open Access Journals (Sweden)

    Javedhusen Malek

    2015-12-01

    Full Text Available In today's ever-changing customer driven market, industries are needed to improve their products and processes to satisfy customer requirements. The Six Sigma approach has set a new paradigm of business excellence. Six Sigma as a process driven improvement methodology has been adopted successfully by many industries. From the review of various literatures, it is revealed that Six Sigma is well adopted in large scale enterprise but having less evidence of adoption in Indian SMEs. This paper is focused on providing path to Indian SMEs for initiating Six Sigma approach in their industries. The paper discusses the real life case where Six Sigma has been successfully applied at one of the Indian small-scale unit to improve rejection/rework rate in manufacturing products by pressure die casting process. This paper describes phase wise application of all the phases of define-measure-analyse-improve-control (DMAIC which also shows impact of Six Sigma in quality improvement.

  6. Extraction of Trivalent Actinides and Lanthanides from Californium Campaign Rework Solution Using TODGA-based Solvent Extraction System

    Energy Technology Data Exchange (ETDEWEB)

    Benker, Dennis [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Delmau, Laetitia Helene [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dryman, Joshua Cory [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-07-01

    This report presents the studies carried out to demonstrate the possibility of quantitatively extracting trivalent actinides and lanthanides from highly acidic solutions using a neutral ligand-based solvent extraction system. These studies stemmed from the perceived advantage of such systems over cationexchange- based solvent extraction systems that require an extensive feed adjustment to make a low-acid feed. The targeted feed solutions are highly acidic aqueous phases obtained after the dissolution of curium targets during a californium (Cf) campaign. Results obtained with actual Cf campaign solutions, but highly diluted to be manageable in a glove box, are presented, followed by results of tests run in the hot cells with Cf campaign rework solutions. It was demonstrated that a solvent extraction system based on the tetraoctyl diglycolamide molecule is capable of quantitatively extracting trivalent actinides from highly acidic solutions. This system was validated using actual feeds from a Cf campaign.

  7. Suitability of orthodontic brackets for rebonding and reworking following removal by air pressure pulses and conventional debracketing techniques.

    Science.gov (United States)

    Knösel, Michael; Mattysek, Simone; Jung, Klaus; Kubein-Meesenburg, Dietmar; Sadat-Khonsari, Reza; Ziebolz, Dirk

    2010-07-01

    To test the null hypothesis that there are no significant differences in the reusability of debonded brackets with regard to debonding technique and adhesive used. Ninety-six osteotomed third molars were randomly assigned to two study groups (n = 48) for bonding of a 0.018-inch bracket (Ormesh, Ormco) with either a composite adhesive (Mono-Lok2; RMO) or a glass ionomer cement (GIC; Fuji Ortho LC;GC). Each of these two groups were then randomly divided into four subgroups (n = 12) according to the method of debonding using (1) bracket removal pliers (BRP; Dentaurum), (2) a side cutter (SC; Dentaurum), (3) a lift-off debracketing instrument (LODI; 3M-Unitek), or (4) an air pressure pulse device (CoronaFlex; KaVo). The brackets were subsequently assessed visually for reusability and reworkability with 2x magnification and by pull testing with a 0.017- x 0.025-inch steel archwire. The proportions of reusable brackets were individually compared in terms of mode of removal and with regard to adhesives using the Fisher exact test (alpha = 5%). The null hypothesis was rejected. Not taking into account the debonding method, brackets bonded with GIC were judged to a significant extent (81%; n = 39; P < .01) to be reworkable compared with those bonded with composite (56%; n = 27). All brackets in both adhesive groups removed with either the LODI or the CoronaFlex were found to be reusable, whereas 79% (46%) of the brackets removed with the BRP (SC) were not. The proportion of reusable brackets differed significantly between modes of removal (P < .01). With regard to bracket reusability, the SC and the BRP cannot be recommended for debonding brackets, especially in combination with a composite adhesive.

  8. Bar deposition in glacial outburst floods: scaling, post-flood reworking, and implications for the geomorphological and sedimentary record

    Science.gov (United States)

    Marren, Philip

    2016-04-01

    The appearance of a flood deposit in the geomorphological and sedimentary record is a product of both the processes operating during the flood, and those that occur afterwards and which overprint the deposit with a record of 'normal' processes. This paper describes the creation and modification of jökulhlaup barforms in the Skeiðará river, relating the changes to post-flood fluvial processes and glacier retreat. Large compound bars formed from the amalgamation of unit bars up to 1.5 km long. Nearly half of the total discharge of the November 1996 jökulhlaup on Skeiðarársandur was discharged through the Skeiðará river. The flood deposits have been extensively reworked since, up until 2009 when the channel was abandoned, effectively leaving the Skeiðará as a terrace, when retreat of Skeiðarárjökull directed meltwater to the adjacent Gígjukvísl river system. Large compound bars formed in the flood channel, with their location governed by the macro-scale topography of the flood channel, and their size by upstream channel width in accordance with bar-scaling theory. Jökulhlaup bars are therefore scale invariant and formed in a similar fashion to braid bars in non-jökulhlaup braided rivers. Post-flood fragmentation and reworking of the bars consistently increased the length-width ratio of preserved bar fragments from approximately two and one half to over five. When combined with earlier work on the Skeiðará jökulhlaup bars, and studies of jökulhlaup deposits elsewhere on Skeiðarársandur these observations increase our understanding of the preservation potential and final form of jökulhlaup deposits and provide the basis for an improved model for the recognition of jökulhlaup deposits in the geomorphological and sedimentary record.

  9. 120-MM Target Practice Cone Stabilized Discarding Sabot with Tracer (TPCSDS-T) M865 (E3) Rework Report (Pop-Rivet Design)

    National Research Council Canada - National Science Library

    Donlon, Francis

    2002-01-01

    .... The team came up with three different solutions for field fix rework: (a) pop rivets; (b) foam fill, and (c) pool of epoxy. The foam design was the number one choice of the team, but the pop rivets had lower overall risk...

  10. A reworked Lake Zone margin: Chronological and geochemical constraints from the Ordovician arc-related basement of the Hovd Zone (western Mongolia)

    Czech Academy of Sciences Publication Activity Database

    Soejono, I.; Buriánek, D.; Janoušek, V.; Svojtka, Martin; Čáp, P.; Erban, V.; Ganpurev, D.

    294/295, December (2017), s. 112-132 ISSN 0024-4937 Institutional support: RVO:67985831 Keywords : Ordovician magmatic arc * Mid-Silurian intra-plate magmatism * Hovd Zone * Reworked Lake Zone Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Geology Impact factor: 3.677, year: 2016

  11. Marketing strategies - consumers

    International Nuclear Information System (INIS)

    Campbell, C.

    1985-01-01

    As Australia's largest consumer organisation, the Australian Consumers' Association (ACA) has a vital role in providing information, so consumers can make an informed choice, as well as participating in formulation of standards to increase the quality of products, including foods. The consumer movement is marketing the process of irradiation and will continue to give consumers information that allows them to make an informed choice

  12. Consumer Economics and Consumer Mathematics Textbooks.

    Science.gov (United States)

    Eastern Michigan Univ., Ypsilanti. National Inst. for Consumer Education.

    This publication lists a selection of consumer economics and consumer mathematics textbooks available for review from the National Institute for Consumer Education. Twenty-six textbooks for the secondary level are cited. Nine advanced level texts are also listed. These texts are generally considered college level texts but could be adapted for…

  13. Online Consumer Ethnocentrism of Danish Consumers

    DEFF Research Database (Denmark)

    Bujac, Andreea Ioana

    2017-01-01

    No doubt that consumer ethnocentrism is an important phenomenon in international marketing. However, not much attention has been paid to consumer ethnocentrism in an online context. The current study aims to fill in this gap. Specifically, the ethnocentric tendency of Danish online consumers...

  14. Net positive energy buildings

    International Nuclear Information System (INIS)

    Romero, A.; Barreiro, E.; Sanchez Zabala, V.

    2010-01-01

    Buildings are great consumers of energy, being responsible for almost 36% of CO2 emissions in Europe. Though there are many initiatives towards the reduction of energy consumption and CO2 emissions in buildings, many of the alternatives are diminished due to a lack of a unique and holistic approach to the problem. This paper reports a new innovative concept of Positive Energy Buildings (EB+), as well as an integral methodology that covers the overall design process for achieving them. The methodology evaluates energy efficiency solutions at different scales, from building site to generation systems. An educational building design in Navarra serves as a case study to check the feasibility of the proposed methodology. The study concludes that the key to achieve a Positive Energy Building is a minimized energy demand, complemented by efficient facilities and enhanced by distributed power generation from renewable sources. (Author).

  15. Producer-retailer integrated EMQ system with machine breakdown, rework failures, and a discontinuous inventory issuing policy.

    Science.gov (United States)

    Chiu, Singa Wang; Chen, Shin-Wei; Chiu, Yuan-Shyi Peter; Li, Ting-Wei

    2016-01-01

    This study develops two extended economic manufacturing quantity (EMQ)-based models with a discontinuous product issuing policy, random machine breakdown, and rework failures. Various real conditions in production processes, end-product delivery, and intra-supply chains such as a producer-retailer integrated scheme are examined. The first model incorporates a discontinuous multi-delivery policy into a prior work (Chiu et al. in Proc Inst Mech Eng B J Eng 223:183-194, 2009) in lieu of their continuous policy. Such an enhanced model can address situations in supply chain environments, where finished products are transported to outside retail stores (or customers). The second model further combines retailer's stock holding costs into the first model. This extended EMQ model is applicable in situations in present-day manufacturing firms where finished products are distributed to company's own retail stores (or regional sales offices) and stocked there for sale. Two aforementioned extended EMQ models are investigated, respectively. Mathematical modeling along with iterative algorithms are employed to derive the optimal production run times that minimize the expected total system costs, including the costs incurred in production units, transportation, and retail stores, for these integrated EMQ systems. Numerical examples are provided to demonstrate the practical application of the research results.

  16. A prolonged granitoid formation in Saglek Block, Labrador: Zonal growth and crustal reworking of continental crust in the Eoarchean

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Komiya

    2017-03-01

    We made a detailed sketch of a small outcrop in St. John's Harbour South (SJHS area, and classified the orthogneisses and mafic enclaves into seven generations based on the geologic occurrence. The first and second generations comprise mafic rocks and lack magmatic zircons. We conducted CL imaging and U-Pb dating of zircons from the third, sixth and seventh generation of the orthogneisses to estimate the protolith ages at 3902 ± 25, 3892 ± 33 and 3897 ± 33 Ma for each, supporting the presence of the over 3.9 Ga Iqaluk Gneiss. The geological occurrence that the mafic rocks occur as enclaves within the 3.9 Ga Iqaluk Gneiss indicates that they are the oldest supracrustal rocks in the world. Our geochronological and geological studies show the Uivak Gneiss is quite varied in lithology and age from 3.6 to >3.9 Ga, and tentatively classified into six groups based on their ages. The oldest Uivak Gneiss components including the Iqaluk Gneiss are present around the SJHS area, and the orthogneisses become young as it is away. The lines of evidence of overprinting of younger granitoid on older granitoid in small outcrops and geological-map scale as well as presence of inherited zircons even in the oldest suite suggests that crustal reworking played an important role on erasing the ancient crusts.

  17. CGB - Consumer Complaints Data

    Data.gov (United States)

    Federal Communications Commission — Individual informal consumer complaint data detailing complaints filed with the Consumer Help Center beginning October 31, 2014. This data represents information...

  18. Building a Culinary Arts Academy

    Science.gov (United States)

    Brown, Robert L.

    2005-01-01

    When Judy Karen Brown (the 2004 Alabama Family and Consumer Sciences Teacher of the Year) arrived at Bob Jones High School (BJHS) in Madison, Alabama, in the summer of 1999, she immediately identified a need to build both student and community interests in family and consumer sciences (FACS). She noticed the student and faculty interest in the…

  19. Journal of Consumer Sciences

    African Journals Online (AJOL)

    The Journal of Consumer Sciences is an official publication of the South African Association of Family Ecology and Consumer Sciences (SAAFECS). The Journal of Consumer Sciences (JCS) publishes articles that focus on consumer experiences in different places and from different perspectives and methodological ...

  20. Multiple crust reworking in the French Armorican Variscan belt: implication for the genesis of uranium-fertile leucogranites

    Science.gov (United States)

    Ballouard, C.; Poujol, M.; Zeh, A.

    2018-03-01

    Muscovite peraluminous granites (MPGs) form by partial melting of the continental crust and can be related to metalliferous deposits such as tin, tungsten, and uranium (U). Metal enrichment in MPGs commonly results from fractional crystallization, but the metal contents of the source play a major role for their fertility. Between ca. 320 and 300 Ma (Late Carboniferous), the French Armorican Variscan belt was intruded by numerous U-fertile MPGs that contain inherited zircon grains with a wide range of ages from Archean-to-Carboniferous. U-Pb and Hf isotopic data of zircon grains from Brioverian-to-Carboniferous sediments, Cambrian-to-Early Carboniferous granitoids, and Late Carboniferous MPGs indicate that the crust of the Armorican Massif is made up by detritus mainly derived from the West African craton (3500-1600 Ma; T DM = 3.8-2.3 Ga), Grenvillian belt (1200-900 Ma; T DM = 2.7-1.2 Ga), and Avalonian-Cadomian belt (800-550 Ma; T DM = 2.5-0.8 Ga) and that the crust was affected by magmatic events at 510-470 Ma (T DM = 1.6-0.6 Ga), 410-330 Ma (T DM = 1.6-1 Ga), and 320-300 Ma. Furthermore, they reveal that the Late Carboniferous MPGs were mainly formed by partial melting of Brioverian sediments with Cambro-Ordovician and Devonian-Carboniferous granitoids, which are all genetically linked with each other and characterized by Th/U < 4. The new data suggest that the U-fertile MPGs result from multiple reworking of U-rich Brioverian sediments, deposited ca. 550 Ma ago on the northern margin of Gondwana, and partially molten during several Paleozoic events, causing a successive increase in U content in the middle-upper crust.

  1. Strategic production modeling for defective items with imperfect inspection process, rework, and sales return under two-level trade credit

    Directory of Open Access Journals (Sweden)

    Aditi Khanna

    2017-01-01

    Full Text Available Quality decisions are one of the major decisions in inventory management. It affects customer’s demand, loyalty and customer satisfaction and also inventory costs. Every manufacturing process is inherent to have some chance causes of variation which may lead to some defectives in the lot. So, in order to cater the customers with faultless products, an inspection process is inevitable, which may also be prone to errors. Thus for an operations manager, maintaining the quality of the lot and the screening process becomes a challenging task, when his objective is to determine the optimal order quantity for the inventory system. Besides these operational tasks, the goal is also to increase the customer base which eventually leads to higher profits. So, as a promotional tool, trade credit is being offered by both the retailer and supplier to their respective customers to encourage more frequent and higher volume purchases. Thus taking into account of these facts, a strategic production model is formulated here to study the combined effects of imperfect quality items, faulty inspection process, rework process, sales return under two level trade credit. The present study is a general framework for many articles and classical EPQ model. An analytical method is employed which jointly optimizes the retailer’s credit period and order quantity, so as to maximize the expected total profit per unit time. To study the behavior and application of the model, a numerical example has been cited and a comprehensive sensitivity analysis has been performed. The model can be widely applicable in manufacturing industries like textile, footwear, plastics, electronics, furniture etc.

  2. Rethink, Rework, Recycle.

    Science.gov (United States)

    Wrhen, Linda; DiSpezio, Michael A.

    1991-01-01

    Information about the recycling and reuse of plastics, aluminum, steel, glass, and newspapers is presented. The phases of recycling are described. An activity that allows students to separate recyclable materials is included. The objectives, a list of needed materials, and procedure are provided. (KR)

  3. Rework the workload.

    Science.gov (United States)

    O'Bryan, Linda; Krueger, Janelle; Lusk, Ruth

    2002-03-01

    Kindred Healthcare, Inc., the nation's largest full-service network of long-term acute care hospitals, initiated a 3-year strategic plan to re-evaluate its workload management system. Here, follow the project's most important and difficult phase--designing and implementing the patient classification system.

  4. Photovoltaics for Buildings Cutting-Edge PV

    International Nuclear Information System (INIS)

    Hayter, S. J.; Martin, R. L.

    1998-01-01

    Photovoltaic (PV) technology development for building-integrated applications (commonly called PV for Buildings) is one of the fastest growing areas in the PV industry. Buildings represent a huge potential market for photovoltaics because they consume approximately two-thirds of the electricity consumed in the US. The PV and buildings industries are beginning to work together to address issues including building codes and standards, integration, after-market servicing, education, and building energy efficiency. One of the most notable programs to encourage development of new PV-for-buildings products is the PV:BONUS program, supported by the US Department of Energy. Demand for these products from building designers has escalated since the program was initiated in 1993. This paper presents a range of PV-for-buildings issues and products that are currently influencing today's PV and buildings markets

  5. Building Languages

    Science.gov (United States)

    ... Glossary Contact Information Information For… Media Policy Makers Building Languages Recommend on Facebook Tweet Share Compartir Communicating ... any speech and only very loud sounds. Close × “Building Blocks” “Building Blocks” refers to the different skills ...

  6. Mapping Variability in the Medusae Fossae Formation: Yardang Morphologies, Fluvial Reworking, and Crater Depth to Diameter Ratios

    Science.gov (United States)

    Khuller, A. R.; Kerber, L.

    2017-12-01

    The Medusae Fossae Formation (MFF) is a voluminous, fine-grained deposit thought to be of pyroclastic origin. While it contains widespread, well-preserved inverted fluvial features, its pervasive cover of dust means that little is known about its composition, and indirect means must be used to characterize its material properties. This project aims to correlate fluvial features in the Western MFF with other indicators of material strength: yardang morphology and crater depth-to-diameter ratios. For this work, Context Camera (CTX) images were used to map features of fluvial origin (inverted channels, sinuous ridges, alluvial fans). The presence of rounded, meso-yardangs in close proximity to fluvial features was also mapped. Crater depth-diameter (d/D) ratios (for craters 1-512km) were analyzed using a global Mars crater database (Robbins and Hynek, 2012) as a proxy for material strength. Approximately 1400 fluvial segments were mapped, with the most populous cluster located in Aeolis and Zephyria Plana. Rounded meso-yardangs were found to be common in areas that also have fluvial features. In agreement with previous work (Barlow, 1993), MFF craters were found to have a greater d/D ratio (0.0523) than the global mean (0.0511). Ratios between MFF lobes differ significantly, providing insight into the heterogeneity of induration within the formation. The deepest craters are found in Eumenides Dorsum and the shallowest in Aeolis Planum, consistent with a greater degree of induration and reworking in the western part of the formation where the fluvial features and "salt-playa" meso-yardangs are found. It also suggests that Eumenides, which is the tallest MFF outcrop, could also be the least compacted. The presence of long, complex, and sometimes overlapping branching networks imply multiple relative episodes of channel formation. Rounded meso-yardangs, which are associated with salt playa surfaces on Earth, provide additional evidence for the presence of liquid water

  7. Consumer Empowerment in Dermatology

    Science.gov (United States)

    Hoch, Heather E.; Busse, Kristine L.; Dellavalle, Robert P.

    2009-01-01

    Summary Health care consumers increasingly confront and collaborate with their medical providers. We describe consumer success in other medical fields and in dermatology, especially dermatologic disease advocacy and improving dermatologist-patient interactions. PMID:19254661

  8. Into beef consumers' mind

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Brei, Vinicius A.

    indicated similarities amongst Brazilian and Australian consumers regarding their positive attitude towards beef and main concerns regarding its consumption. Dutch consumers, although presented negative attitudes, considered beef consumption as important. In general respondents presented a high degree...

  9. Constructive Consumer Choice Processes.

    OpenAIRE

    Bettman, James R; Luce, Mary Frances; Payne, John W

    1998-01-01

    Consumer decision making has been a focal interest in consumer research, and consideration of current marketplace trends ( e.g., technological change, an information explosion) indicates that this topic will continue to be critically important. We argue that consumer choice is inherently constructive. Due to limited processing capacity, consumers often do not have well-defined existing preferences, but construct them using a variety of strategies contingent on task demands. After describing c...

  10. Impulsive consumer behavior

    OpenAIRE

    Kovač Žnideršić, Ružica; Grubor, Aleksandar; Marić, Dražen

    2014-01-01

    Research into consumer behaviour features as the foundation of all the planned and implemented marketing activities of a company. Consumer behaviour is determined by numerous factors, and is therefore characterised as highly complex and difficult to predict. A particular challenge for marketing science and practice is to research impulse consumer behaviour in shopping – a behaviour that occurs when consumers experience a sudden, powerful and persistent urge to buy something immediately. This ...

  11. Ordered Consumer Search

    OpenAIRE

    Armstrong, Mark

    2016-01-01

    The paper discusses situations in which consumers search through their options in a deliberate order, in contrast to more familiar models with random search. Topics include: network effects (consumers may be better off following the same search order as other consumers); the use of price and non-price advertising to direct search; the impact of consumers starting a new search with their previous supplier; the incentive sellers have to merge or co-locate with other sellers; and the incentive a...

  12. Shyness in consumer behavior

    OpenAIRE

    Kusterer, Sandra

    2017-01-01

    Shyness is widespread among the population and affects a large group of consumers. Companies, however, have barely knowledge about this kind of consumers and their behavior. Particularly in the field of complaint management the barriers which prevent consumers of voicing a complaint are largely unknown and quite often companies are not aware of the dissatisfaction among their customers. Thus, this paper aims to analyze the impact of shyness on consumer complaint behavior. A survey-based appro...

  13. Consumer Directed Health Care

    OpenAIRE

    John Goodman

    2006-01-01

    Consumer driven health care (CDHC) is a potential solution to two perplexing problems: (1) How to choose between health care and other uses of money, and (2) how to allocate resources in an industry where normal market forces have been systemically suppressed. In the consumer-driven model, consumers occupy the primary decision-making role regarding the health care that they receive. From an employee benefits perspective, consumer driven health care in the broadest sense may refer to limited e...

  14. Informing Consumers About Themselves

    NARCIS (Netherlands)

    O. Bar-Gill (Oren)

    2010-01-01

    textabstractConsumers make mistakes. Imperfect information and imperfect rationality lead to misperception of benefits and costs associated with a product. As a result, consumers might fail to maximise their preferences in product choice or product use. A proposed taxonomy of consumer mistakes draws

  15. Radurization : the consumer perspective

    International Nuclear Information System (INIS)

    Foster, J.W.

    1989-01-01

    A three part study in which a number of consumer groups were involved was conducted. The study examined the views of South African consumers concerning radurization. The results of the study are discussed and recommendations are made with regard to possible greater consumer acceptance of radurization in South Africa. 2 figs

  16. Consumer Decisions. Student Manual.

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. Div. of Vocational Education.

    This student manual covers five areas relating to consumer decisions. Titles of the five sections are Consumer Law, Consumer Decision Making, Buying a Car, Convenience Foods, and Books for Preschool Children. Each section may contain some or all of these materials: list of objectives, informative sections, questions on the information and answers,…

  17. Consumer Protection for Educators.

    Science.gov (United States)

    Wallace, James M.

    Educational changes are examined from the perspective of consumer protection--the direct consumers are the teachers being prepared; the indirect consumers are the students and the society that supports the schools. During the colonial and early national periods of American history, there was an absence of formal and separate teacher education.…

  18. Consumer rights and protections

    Science.gov (United States)

    ... care consumer rights; Rights of the health care consumer ... RIGHTS AND PROTECTIONS Here are ways that the health care law protects consumers. You must be covered, even if you have a pre-existing condition. No insurance plan can reject you, ...

  19. Consumer behavior research

    OpenAIRE

    Hašková, Lucie

    2010-01-01

    The major part of this work is a consumer behavior research in process of buying christmas presents. The goal of this work is to describe a consumer behavior of Prague's customers in process of buying christmas presents, also describe a a consumer behavior of different age and social groups, as well as the difference between men and women.

  20. MEASUREMENT OF CONSUMER ETHNOCENTRISM OF SLOVAK CONSUMERS

    Directory of Open Access Journals (Sweden)

    Janka Taborecka-Petrovicova

    2014-10-01

    Full Text Available The conceptualization of consumer ethnocentrism is inferred from the general concept of ethnocentrism which assumes that ethnocentrism starts with the culture into which an individual is born. Over time, the individual will accept the values and behaviour of this particular culture as a norm. However, when the individual becomes aware of other cultures with different values and behaviours, there develops the need of belonging and identification with own culture rather than that of others. When analysing the consumer ethnocentrism, it is also essential to examine whether consumer ethnocentrism operates uniformly across all consumers or there exist some specific factors moderating their ethnocentric tendencies. A lot of studies researching these issues can be found in various cultural contexts, however in Slovakia we found certain gap since there is just a few of them. The aim of the paper is to investigate the level of consumer ethnocentricity of Slovak consumers in general and with the respect to chosen variables – age and gender. The results can serve as an information base for decision-making process of marketing managers focusing especially on local production of domestic products.

  1. Alternative fabrication scheme to study effects of rework of nonconforming products and delayed differentiation on a multiproduct supply-chain system

    Directory of Open Access Journals (Sweden)

    Yuan-Shyi Peter Chiu

    2017-07-01

    Full Text Available This study uses an alternative fabrication scheme to study the effect of rework of nonconforming items and delayed differentiation on a multiproduct supply-chain system. Traditional economic production quantity model focuses on a single-product inventory system where all products made are assumed to be perfect quality and finished products are issued continuously. To increase machine utilization, lower quality costs in production, and reflect the real-world vendor-buyer integrated systems Chiu et al. (2016a [Chiu, Y-S.P., Kuo, J-S., Chiu, S. W., Hsieh, Y-T. (2016a. Effect of delayed differentiation on a multiproduct vendor–buyer integrated inventory system with rework. Advances in Production Engineering & Management, 11(4, 333-344.] employed a single-machine two-stage production scheme to study the effects of rework and delayed differentiation on a multi-product supply-chain system. With the intention of further reducing fabrication cycle time, this study considers an alternative two-machine two-stage fabrication scheme to re-explore the problem in Chiu et al. (2016a. Machine one solely produces all common parts for multiple end products. Then, machine two fabricates the customized multiproduct using a common cycle time strategy. Through the use of mathematical modeling and analyses, the optimal production cycle length and distribution policy are derived. Numerical examples are provided to demonstrate practical usage of the research results, and show its significant benefit in reducing fabrication cycle time compared to that obtained from prior studies that used different schemes.

  2. Consumer loyalty in retailing

    Directory of Open Access Journals (Sweden)

    Drinić Dragana

    2014-01-01

    Full Text Available Loyal consumers are partner enterprises and they represent stable source of income. Companies are more interested in maintaining the existing consumers, rather than attracting the newones, because loyal consumers are the most valuable asset. The aim of this article is to develop an integrative conceptual framework for creating and maintaining consumer loyalty, and ,at the same time, to be based on a thorough review of the relevant literature and the current market situation . In this context, empirical research was carried out by using the survey method on a random sample of 165 respondents. Based on the research conducted, important factors that influence consumer loyalty were identified.

  3. Model Integrasi Penjadwalan Batch dan Penjadwalan Preventive Maintenance dengan Kriteria Minimisasi Biaya Simpan, Biaya Setup, Biaya Pm, serta Biaya Rework pada Mesin Stabil

    Directory of Open Access Journals (Sweden)

    Zahedi Zahedi

    2014-06-01

    Full Text Available This study developed a model of batch scheduling involving the unavailability machine to minimize setup costs, cost of preventive maintenance and the cost of rework in a stable machine. This model is considered necessary in order to understand the effect of the unavailability machine for production runs and to understand the effect on the batch production schedule. The results of this study indicate that the first and last run will not give single batch. Given a hypothetical example of how the model and algorithm developed solve the problem instance. 

  4. Modelling the reworking effects of bioturbation on the incorporation of radionuclides into the sediment column: implications for the fate of particle-reactive radionuclides in Irish Sea sediments

    International Nuclear Information System (INIS)

    Cournane, S.; Leon Vintro, L.; Mitchell, P.I.

    2010-01-01

    A microcosm laboratory experiment was conducted to determine the impact of biological reworking by the ragworm Nereis diversicolor on the redistribution of particle-bound radionuclides deposited at the sediment-water interface. Over the course of the 40-day experiment, as much as 35% of a 137 Cs-labelled particulate tracer deposited on the sediment surface was redistributed to depths of up to 11 cm by the polychaete. Three different reworking models were employed to model the profiles and quantify the biodiffusion and biotransport coefficients: a gallery-diffuser model, a continuous sub-surface egestion model and a biodiffusion model. Although the biodiffusion coefficients obtained for each model were quite similar, the continuous sub-surface egestion model provided the best fit to the data. The average biodiffusion coefficient, at 1.8 ± 0.9 cm 2 y -1 , is in good agreement with the values quoted by other workers on the bioturbation effects of this polychaete species. The corresponding value for the biotransport coefficient was found to be 0.9 ± 0.4 cm y -1 . The effects of non-local mixing were incorporated in a model to describe the temporal evolution of measured 99 Tc and 60 Co radionuclide sediment profiles in the eastern Irish Sea, influenced by radioactive waste discharged from the Sellafield reprocessing plant. Reworking conditions in the sediment column were simulated by considering an upper mixed layer, an exponentially decreasing diffusion coefficient, and appropriate biotransport coefficients to account for non-local mixing. The diffusion coefficients calculated from the 99 Tc and 60 Co cores were in the range 2-14 cm 2 y -1 , which are consistent with the values found by other workers in the same marine area, while the biotransport coefficients were similar to those obtained for a variety of macrobenthic organisms in controlled laboratories and field studies. -- Research highlights: →N. diversicolor redistributes up to 35% particle

  5. Building the perfect PC

    CERN Document Server

    Thompson, Robert Bruce

    2006-01-01

    This popular Build-It-Yourself (BIY) PC book covers everything you want to know about building your own system: Planning and picking out the right components, step-by-step instructions for assembling your perfect PC, and an insightful discussion of why you'd want to do it in the first place. Most big brand computers from HP, Dell and others use lower-quality components so they can meet their aggressive pricing targets. But component manufacturers also make high-quality parts that you can either purchase directly, or obtain through distributors and resellers. Consumers and corporations

  6. Behavioural Economics, Consumer Behaviour, and Consumer Policy

    DEFF Research Database (Denmark)

    Reisch, Lucia A.; Zhao, Min

    2017-01-01

    . In particular, we discuss the impacts of key principles such as status quo bias, the endowment effect, mental accounting and the sunkcost effect, other heuristics and biases related to availability, salience, the anchoring effect and simplicity rules, as well as the effects of other supposedly irrelevant...... factors such as music, temperature and physical markers on consumers’ decisions. These principles not only add significantly to research on consumer behaviour – they also offer readily available practical implications for consumer policy to nudge behaviour in beneficial directions in consumption domains...... including financial decision making, product choice, healthy eating and sustainable consumption....

  7. Consumer engagement: An insight from smart grid projects in Europe

    International Nuclear Information System (INIS)

    Gangale, Flavia; Mengolini, Anna; Onyeji, Ijeoma

    2013-01-01

    This paper provides an insight into consumer engagement in smart grid projects in Europe. Projects analysed are those included in the catalogue annexed in the JRC Report “Smart Grid projects in Europe: lessons learned and current developments”. The analysis suggests an increase in the interest in consumer engagement projects at European level and a strong focus on the residential sector, and emphasises the key importance of public funding to support these projects. The study also reveals that projects involving consumers are characterised by the pursuit of two main objectives: gaining deeper knowledge of consumer behaviour (observing and understanding the consumer) and motivating and empowering consumers to become active energy customers (engaging the consumer). The paper reviews the main activities undertaken to obtain these objectives and highlights trends and developments in the field. Finally, the paper discusses obstacles to consumer engagement and the strategies adopted by the projects surveyed to tackle them, highlighting the need to build consumer trust and to design targeted campaigns taking into consideration different consumer segments. The conclusions are in line with findings and analyses presented in the literature and underscore the need for further research and action at European level. - Highlights: • Consumers' key role in the success of the future electricity system (smart grids). • Survey on consumer engagement experiences in European smart grid projects. • Focus is on observing and understanding the consumers and on engaging them. • Trust and confidence as central elements. • Need to take into consideration different consumer segments/motivational factors

  8. Field Report - Consumer Survey

    DEFF Research Database (Denmark)

    Nielsen, Kristian S.; Gwozdz, Wencke

    The present report outlines the purpose, scope, and methodology of a recently conducted four-country consumer survey that explored sustainable clothing consumption. The report also presents a sample of the descriptive findings from the survey (see Gwozdz, Nielsen & Müller, 2017 for further results...... foundation for upcoming deliverables relating to quality of life, acceptance of new business models, and consumer policy recommendations. The results presented in the report relate, specifically, to consumers’ general clothing consumption patterns, acceptance of new business models, and environmental...... purchasing outlets, and acceptance of new business models. Polish and American consumers purchased the most clothing items. Polish consumers also reported the lowest expenditures on clothing, whereas German consumers reported the highest expenditures. Only a limited proportion of consumers had previously...

  9. Building Energy Monitoring and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  10. Global market and consumers

    Directory of Open Access Journals (Sweden)

    Rakić Beba

    2003-01-01

    Full Text Available All consumers in the world share certain needs and desires. They show however, remarkable diversity in the way they satisfy these needs and desires. Understanding the consumer behavior is difficult enough in the confines of a single country. Can manager understand the consumer behavior in many different world markets? International marketer must learn how to satisfy customers with widely different buying behaviors.

  11. Sustainable consumer behaviour

    OpenAIRE

    Antonides, Gerrit

    2017-01-01

    We summarise the contributions in this special issue on sustainable consumer behaviour and place them in perspective. Several studies focus on macro- and meso-issues, and others on micro-issues of consumer behaviour. The studies employ a variety of methods, including surveys, field experiments, eye tracking, scale development, and contingent valuation. The 12 contributions from authors of 13 different countries show the wide and varied application of consumer research focused on sustainabilit...

  12. Consumer Buying Behavior

    OpenAIRE

    Irena Vida; Mojca Maher Pirc

    2006-01-01

    The study examines the phenomenon of national identity and economic ethnocentrism in consumer buying behavior. Analysis of data collected from a representative sample of adult Slovenian consumers reveals only moderately expressed ethnocentric tendencies. Similar moderation was revealed in the preferences of Slovenian consumers for patriotic purchasing behavior, whereby the domestic origin of products was more important in the case of nondurable goods and services than in the case of durable g...

  13. From Consumerism to the Empowerment of Consumers: The Case of Consumer Oriented Movements in France

    Directory of Open Access Journals (Sweden)

    Sophie Dubuisson-Quellier

    2010-06-01

    Full Text Available Political consumerism was developed during the 19th century and expanded at the turn of the century through social movements aimed at empowering civil society in the market. Many of these movements succeeded in building power on the consumption side. Today, we still witness several forms of political consumerism. This contribution explores the possibilities and limits of consumer involvement in sustainable consumption. The main finding of this study of the political organization of consumers is that the market may not be the only arena for changing consumer behavior. Instead, social constraint and political empowerment seem to be rather more efficient.

  14. Consumer preferences in the design of airport passenger areas

    NARCIS (Netherlands)

    Van Oel, C.J.; Van den Berkhof, F.W.

    2013-01-01

    In recent decades, commercial developments have become increasingly important for the overall profit of airports. However, little is known about consumer preferences regarding the design of passenger areas, which is striking as the design of terminal buildings affects consumers' emotional state and

  15. New insights into consumer-led food product development

    NARCIS (Netherlands)

    Costa, A.I.A.; Jongen, W.M.F.

    2006-01-01

    This paper builds upon a review of relevant marketing, consumer science and innovation management literature to introduce the concept of consumer-led new product development and describe its main implementation stages. The potential shortcomings of this concept's application in European food

  16. Transforming Consumers Into Brands

    DEFF Research Database (Denmark)

    Erz, Antonia; Christensen, Anna-Bertha Heeris

    2018-01-01

    The goal of this research is to explore the transformational power of a new consumption and production practice, the practice of blogging, to understand its impact on consumers' identity transformations beyond their self-concept as consumers and on the blogosphere as an organizational field....... Through an exploratory study of over 12,000 blog posts from five fashion bloggers, complemented by in-depth interviews, we trace the transformation of consumer bloggers. We identify and describe three identity phases, the individual consumer, collective blogger and blogger identity phase, and two...

  17. Alaska Consumer Protection Unit

    Science.gov (United States)

    Drafting Manual Attorney General Opinions Executive Branch Ethics Criminal Justice Alaska Medicaid Fraud make wise purchasing decisions and avoid becoming victims of consumer fraud. The site also includes

  18. Building America

    Energy Technology Data Exchange (ETDEWEB)

    Brad Oberg

    2010-12-31

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  19. Building calculations

    DEFF Research Database (Denmark)

    Jensen, Bjarne Christian; Hansen, Svend Ole

    Textbook on design of large panel building including rules on robustness and a method for producing the Statical documentattion......Textbook on design of large panel building including rules on robustness and a method for producing the Statical documentattion...

  20. Solar building

    OpenAIRE

    Zhang, Luxin

    2014-01-01

    In my thesis I describe the utilization of solar energy and solar energy with building integration. In introduction it is also mentioned how the solar building works, trying to make more people understand and accept the solar building. The thesis introduces different types of solar heat collectors. I compared the difference two operation modes of solar water heating system and created examples of solar water system selection. I also introduced other solar building applications. It is conv...

  1. Building envelope

    CSIR Research Space (South Africa)

    Gibberd, Jeremy T

    2009-01-01

    Full Text Available for use in the building. This is done through photovoltaic and solar water heating panels and wind turbines. Ideally these are integrated in the design of the building envelope to improve the aesthetic quality of the building and minimise material... are naturally ventilated. Renewable energy The building envelope includes renewable energy generation such as photovoltaics, wind turbines and solar water heaters and 10% of the building’s energy requirements are generated from these sources. Views All...

  2. Auxiliary buildings

    International Nuclear Information System (INIS)

    Lakner, I.; Lestyan, E.

    1979-01-01

    The nuclear power station represents a complicated and a particular industrial project. Consequently, the design of the auxiliary buildings serving the power station (offices, kitchen, refreshment room, workshops, depots, water treatment plant building, boiler houses, etc.) requires more attention than usual. This chapter gives a short survey of the auxiliary buildings already completed and discusses the problems of their design, location and structure. (author)

  3. Building 2000

    International Nuclear Information System (INIS)

    Den Ouden, C.; Steemers, T.C.

    1992-01-01

    This is the first volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this first rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In a second volume, a similar series of studies is presented for the building categories: office buildings, public buildings and hotels and holiday complexes. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (15 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues

  4. Building 2000

    Energy Technology Data Exchange (ETDEWEB)

    Den Ouden, C [EGM Engineering BV, Dordrecht (Netherlands); Steemers, T C [Commission of the European Communities, Brussels (Belgium)

    1992-01-01

    This is the first volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this first rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In a second volume, a similar series of studies is presented for the building categories: office buildings, public buildings and hotels and holiday complexes. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (15 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues.

  5. Consumers Should Know.

    Science.gov (United States)

    Worthington, Robert M.

    Consumer education can be defined as "a study of intelligent and effective methods of buying and using goods and services, competent money management, and the relationship of the consumer to the economy, the workplace, and the home." An important role of government is providing the individual with information so that the individual can…

  6. Consumers and Producers

    NARCIS (Netherlands)

    E. Maira (Elisa)

    2018-01-01

    markdownabstractIn the last few decades, advances in information and communication technology have dramatically changed the way consumers and producers interact in the marketplace. The Internet and social media have torn down the information barrier between producers and consumers, leading to

  7. Online consumer contracts

    NARCIS (Netherlands)

    Luzak, J.

    2014-01-01

    The new Consumer Rights Directive introduced some changes to the level of consumers’ protection online. However, just like with its predecessor, the Distance Selling Directive, the main focus of the protection that consumers have been granted online is to provide them with transparent and salient

  8. Consumer in insurance law

    Directory of Open Access Journals (Sweden)

    Čorkalo Milena

    2016-01-01

    Full Text Available The paper analyses the notion of consumer in the European Union law, and, in particular, the notion of consumer in insurance law. The author highligts the differences between the notion of consumer is in aquis communautaire and in insurance law, discussing whether the consumer can be defined in both field in the same way, concerning that insurance services differ a lot from other kind of services. Having regarded unequal position of contracting parties and information and technical disadvantages of a weaker party, author pleads for broad definition of consumer in insurance law. In Serbian law, the consumer is not defined in consistent way. That applies on Serbian insurance law as well. Therefore, the necessity of precise and broad definition of consumes is underlined, in order to delimit the circle of subject who are in need for protection. The author holds that the issue of determination of the circle of persons entitled to extended protection as consumers is of vital importance for further development of insurance market in Serbia.

  9. CONSUMER'S RIGHT TO WITHDRAW

    Directory of Open Access Journals (Sweden)

    ANCA NICOLETA GHEORGHE

    2013-05-01

    Full Text Available The right of withdrawal (of a contract belongs to the consumer, and is an essential means for the improvement of regulations that protect the consumer.. Right of withdrawal is not a recent creation and is not even specific to the consumer field. He was previously recognized in civil and commercial law (without special regulation. The right to withdraw may even have as ground the parties will. Thus, based on the contractual freedom, the parties may agree that one of them has the right to terminate the contract unilaterally The possibility of unilateral denunciation of the contract, gives the consumer, added protection by being able to reflect the decision and to check how the trader fulfil its obligations. In this context, through its effects, the right of denunciation, forces the professional parties to conduct themselves as fair as possible to the consumer and to execute the contract properly. In the study of the consumer protection, the time of conclusion is essential because in this stage is manifested, the inequality between the consumer and professional. Thus, the lack of information, the major of products and activities, commercial practices, influence the formation of consumer will, preventing the expression of a freely and knowingly consent.

  10. Consuming apart, together

    NARCIS (Netherlands)

    Bartels, Jos; Reinders, M.J.

    2016-01-01

    Although consumers' awareness of the environmental and ethical consequences of their behaviour has grown, research on the role of multiple consumer identities in sustainability behaviours is scarce. The aim of the current study was to explain sustainable behaviour from a social identity

  11. Sustainable consumer behaviour

    NARCIS (Netherlands)

    Antonides, Gerrit

    2017-01-01

    We summarise the contributions in this special issue on sustainable consumer behaviour and place them in perspective. Several studies focus on macro- and meso-issues, and others on micro-issues of consumer behaviour. The studies employ a variety of methods, including surveys, field experiments,

  12. Observing Reasonable Consumers.

    Science.gov (United States)

    Silber, Norman I.

    1991-01-01

    Although courts and legislators usually set legal standards that correspond to empirical knowledge of human behavior, recent developments in behavioral psychology have led courts to appreciate the limits and errors in consumer decision making. "Reasonable consumer" standards that are congruent with cognitive reality should be developed.…

  13. Cars, Cycles, and Consumers.

    Science.gov (United States)

    Idleman, Hillis K. Ed.

    The purpose of this consumer education module is to provide information and skills, and the ability to raise questions and find answers, while seeking the best automobile or motorcycle buy available for the money. The module may be used for a full or part semester course. The five sections (cars and the consumer, renting and leasing cars, cars and…

  14. Environmentally Friendly Consumer

    DEFF Research Database (Denmark)

    Reijonen, Satu

    2011-01-01

    on the green consumer: cultural determinism, psycho-socio-demographic determinism and calculative determinism. An explanation of the green consumer in these terms, however, loses sight of the emergence and processuality of consumer behaviour. Process oriented constructionism, by contrast, is useful to recover...... these important aspects. This paper suggests a research agenda focused on socio-material processes and situated actions that lead to the emergence and stabilization of a particular type of consumer behaviour.......Several attempts have been made by academics in the past to explain the so-called ‘environmentally conscious’ consumer. These explanations share an important feature, namely determinism. This paper identifies three different sources of determinism that are distinguished in recent literature...

  15. Promoting educated consumer choices

    DEFF Research Database (Denmark)

    Edinger, Wieke Willemijn Huizing

    2016-01-01

    Contemporary EU food information legislation combines and balances two main consumer interests, i.e., a consumer right to information and the freedom of choice, into one single protective standard: informed choice. Although the recent legislative measures quite openly establish a link between...... informed choice and the rather abstract societal norm of “what is good for the consumer,” this does not justify the conclusion that food information legislation has become overly meddlesome in relation to EU consumers and their choice of food. Rather, there has been a gradual maturing of the EU legislator......’s perception of its task from the mere provision of food information to ensuring educated consumer choices. This development is a logical and necessary consequence of the growing complexity of food choices....

  16. Consumer Behavior Research

    Directory of Open Access Journals (Sweden)

    Kaveh Peighambari

    2016-04-01

    Full Text Available This article analyzes 12 years of recent scholarly research on consumer behavior published in the five leading international journals in this field. Analyzing academic contributions to a specific area of research provides valuable insights into how it has evolved over a defined period. The approach was to briefly discuss content analysis and its application in scholarly literature review studies. The methodology used here involves the classification of topics to evaluate key trends in consumer behavior literature. It includes a ranking of topics published, typology of the published articles, the research classification in terms of methodologies, and analysis techniques. The most cited articles in the field and within each journal are also examined. The comprehensive literature review of consumer behavior research undertaken in this article could advance the discipline of consumer behavior research by elucidating the evolution of consumer behavior literature in the studied period.

  17. Consumption and the Consumer

    Directory of Open Access Journals (Sweden)

    Maria VADUVA

    2016-09-01

    Full Text Available The consumer is that trader responsible for consumption act of some final goods or services who decided what must be produce and in what cantity, being the one who make the economic mechanism to move. Consumption is in close connection with the production of goods and services, exerting an active role, any activity should be complete by consuming its results; consumption creates the motivation to achieve economic and non-economic activities. The traditional approach to consumer behavior starts from hypothesised that all consumers seek to maximize the aggregate utility obtained of satisfactions resulting from consumption of goods taking into account the budgetary constraints given by income that consumer has and the prices of these goods. In the conditions of modern economy, consumption can be increased by diseconomies. If consumption depends on permanent income, revenue growth effectively does not exert influence on consumption only to the extent that this increase of income leads to increasing permanent income consumer. Consumption is viewed as an active agent of economic life, it is not only a consumer of goods and services but also a producer.

  18. Building 2000

    International Nuclear Information System (INIS)

    Den Ouden, C.; Steemers, T.C.

    1992-01-01

    This is the second volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this second rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In the first volume, a similar series of studies is presented for the building categories: schools, laboratories and universities, and sports and educational centres. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (11 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues

  19. Building 2000

    Energy Technology Data Exchange (ETDEWEB)

    Den Ouden, C [EGM Engineering BV, Dordrecht (Netherlands); Steemers, T C [Commission of the European Communities, Brussels (Belgium)

    1992-01-01

    This is the second volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this second rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In the first volume, a similar series of studies is presented for the building categories: schools, laboratories and universities, and sports and educational centres. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (11 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues.

  20. Linking consumer experiences

    DEFF Research Database (Denmark)

    Smed, Karina Madsen

    become part of the individual self, worldview, and behaviour. This paper seeks to explore links between consumer experiences through the exploration of narrative sequences in travel blogs. Findings indicate that non-consumption is a central element to the bloggers and also indicative of a community......Consumers consume products in various ways serving a number of purposes. Much attention has been paid to experiences attached to consumption, sometimes very explicitly, e.g. in tourism, the essence of which is experiences of various sorts, but often also implicitly as internalised experiences...

  1. Representing distance, consuming distance

    DEFF Research Database (Denmark)

    Larsen, Gunvor Riber

    Title: Representing Distance, Consuming Distance Abstract: Distance is a condition for corporeal and virtual mobilities, for desired and actual travel, but yet it has received relatively little attention as a theoretical entity in its own right. Understandings of and assumptions about distance...... are being consumed in the contemporary society, in the same way as places, media, cultures and status are being consumed (Urry 1995, Featherstone 2007). An exploration of distance and its representations through contemporary consumption theory could expose what role distance plays in forming...

  2. Consumer Behavior Research Methods

    DEFF Research Database (Denmark)

    Chrysochou, Polymeros

    2017-01-01

    This chapter starts by distinguishing consumer behavior research methods based on the type of data used, being either secondary or primary. Most consumer behavior research studies phenomena that require researchers to enter the field and collect data on their own, and therefore the chapter...... emphasizes the discussion of primary research methods. Based on the nature of the data primary research methods are further distinguished into qualitative and quantitative. The chapter describes the most important and popular qualitative and quantitative methods. It concludes with an overall evaluation...... of the methods and how to improve quality in consumer behavior research methods....

  3. PARADIGMS IN CONSUMER BEHAVIOR

    Directory of Open Access Journals (Sweden)

    Sabrina Oktoria Sihombing

    2011-05-01

    Full Text Available A paradigm influences what we see and conceive about certain facts. Paradigm can also influence what we accept as a truth. Yet, the debate over which paradigm and methodology is best suit for marketing and consumer behavior has begun since 1980s. Many researchers criticized the domination of logical empiricism paradigm and offered alternative paradigm to understand marketing and consumer behavior. This article discusses several paradigms and methodology, which are part of qualitative paradigm, and compares them with positivism paradigm. This article will also point to the importance of reconciliation between qualitative and quantitative paradigm in order to improve marketing and consumer behavior studies.

  4. Evaluation criteria for uranium potential of sedimentary basins based on analysis of host sand body and structurally reworking pattern host sand body has been subject to

    International Nuclear Information System (INIS)

    Chen Zuyi; Guo Qingyin; Liu Hongxu

    2005-01-01

    On the basis of the introduction and the analysis of regional evaluation criteria for sandstone-type uranium deposits summarized by uranium geologists of USA and former Soviet Union, and by introducing new scientific progress in the field of sedimentology of clastic rocks, and basin geodynamics, main evaluation criteria composed of host sand body criterion and the criterion of structurally reworking pattern the host sand body has been subject to, are proposed, and the evaluation model based on analyzing the regional tectonic history and the evolution of prototype basin is set up. Finally, taking the Chaoshui basin as an example, the possibility for hosting epigenetic uranium mineralization in each horizon of the basin cover is discussed, then the main prospecting target horizon is discriminated, and potential ore-formation areas are proposed. (authors)

  5. Laboratory Building

    Energy Technology Data Exchange (ETDEWEB)

    Herrera, Joshua M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    This report is an analysis of the means of egress and life safety requirements for the laboratory building. The building is located at Sandia National Laboratories (SNL) in Albuquerque, NM. The report includes a prescriptive-based analysis as well as a performance-based analysis. Following the analysis are appendices which contain maps of the laboratory building used throughout the analysis. The top of all the maps is assumed to be north.

  6. Nostalgia and Consumer Sentiment.

    Science.gov (United States)

    Moriarty, Sandra Ernst; McGann, Anthony F.

    1983-01-01

    Concludes that designer magazine advertisements contain more traces of nostalgia than do those in consumer magazines and that they tend to be more extreme in their fluctuation patterns. Notes that nostalgia increases in ads when public confidence is decreasing. (FL)

  7. Consumer Product Category Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use...

  8. Consumer choice behaviour

    DEFF Research Database (Denmark)

    Hansen, Flemming; Percy, Larry; Hallum Hansen, Morten

    2004-01-01

    The paper is concerned with the measurement of emotions and the study of the role ofemotions in consumer choice. Contemporary neurological findings suggest that emotionsmay play a role in its own right, quite different from the way in which they have beenconsidered in traditional consumer choice ...... behaviour theory. A large-scale study including800 respondents, covering 64 brands, provide findings on emotional response tendenciesfor the brands, and relate these to involvement, type of need gratification, purchasingbehaviour, etc.......The paper is concerned with the measurement of emotions and the study of the role ofemotions in consumer choice. Contemporary neurological findings suggest that emotionsmay play a role in its own right, quite different from the way in which they have beenconsidered in traditional consumer choice...

  9. Consumer Financial Protection Bureau

    Science.gov (United States)

    ... Openings Doing Business With Us Advisory Groups Project Catalyst Contact Us The CFPB: Working for you This short video covers what the CFPB is and how we are working for American consumers. An official website of ...

  10. Consumer reports [electronic resource

    National Research Council Canada - National Science Library

    1942-01-01

    ... only. A limited number of selected reports, advice on product selection and safety alerts are freely available, as are a five year listing of product recalls, a listing of major consumer product...

  11. Explaining consumer attitudes to genetic modification in food production

    DEFF Research Database (Denmark)

    Bredahl, Lone

    for explaining consumer attitudes to genetic modification in food production which builds on modern cognitive psychology and multi-attribute attitude theory. In addition, the paper introduces the empirical research which is undertaken at present to validate and estimate the parameters of the model by means......Consumers have not had many possibilities yet for seeking out, buying and consuming genetically modified food products. However, for various reasons consumer attitude formation with regard to these products is likely to be complex and closely related to personal values. The paper presents a model...

  12. Consumer choice behaviour

    OpenAIRE

    Hansen, Flemming; Percy, Larry; Hallum Hansen, Morten

    2004-01-01

    The paper is concerned with the measurement of emotions and the study of the role of emotions in consumer choice. Contemporary neurological findings suggest that emotions may play a role in its own right, quite different from the way in which they have been considered in traditional consumer choice behaviour theory. A large-scale study including 800 respondents, covering 64 brands, provide findings on emotional response tendencies for the brands, and relate these to involvement...

  13. Consumer Law Guide

    Science.gov (United States)

    1994-06-01

    Consumer Finance Act by making short-term advances to customers who write personal checks in return for substantially smaller amounts of on-the-spot case...practices lawsuit with H&R Block, Inc. forcing tax return company to advertise its "Rapid Refund" program is actually a loan program charging customers ...home equity loans/lines of credit/home improvement loans, etc.) 2. A consumer can have only 9M principal dwelling at a time (includes mobile homes

  14. THE HICKSIAN RATIONAL CONSUMER

    OpenAIRE

    Manuel FERNÁNDEZ-GRELA

    2005-01-01

    The aim of this paper is to trace the evolution of the concept of ''rational consumer'' in Hicks's writings. After being one of the pioneers in the introduction of rationality assumptions about consumer behaviour in economic models, Hicks gradually developed a sceptical view about some of the uses to which those assumptions were put into. The focus of the paper is on continuity in Hicksian views, providing a picture of gradual changes in the long series of Hicks's works

  15. PARADIGMS IN CONSUMER BEHAVIOR

    OpenAIRE

    Sabrina Oktoria Sihombing

    2011-01-01

    A paradigm influences what we see and conceive about certain facts. Paradigm can also influence what we accept as a truth. Yet, the debate over which paradigm and methodology is best suit for marketing and consumer behavior has begun since 1980s. Many researchers criticized the domination of logical empiricism paradigm and offered alternative paradigm to understand marketing and consumer behavior. This article discusses several paradigms and methodology, which are part of qualitative paradigm...

  16. Consumer behavior: a quadrennium.

    Science.gov (United States)

    Jacoby, J; Johar, G V; Morrin, M

    1998-01-01

    Consumer behavior continued to attract additional researchers and publication outlets from 1993 through 1996. Both general interest and domain-specific scholarly contributions are discussed, along with limitations and suggested areas for future research. A concluding section observes that the integrity of consumer research is unnecessarily compromised by the failure of the major scholarly association in the field to develop and adopt a code of researcher ethics.

  17. Radioactive consumer products

    International Nuclear Information System (INIS)

    Sato, Otomaru

    1981-01-01

    Present situation of utilizing the radioactive consumer products and exposure dose were reviewed with published data. Practically, consumer products are divided into three categories, (1) radioactive nuclides intentionally incorporated into radioluminous dye, ionization chambers for smoke detector, eliminator of static electricity, and glow lamp (2) natural radioactive nuclides contained in false teeth, porcelain, glass, and gas mantle (3) natural radioactive nuclides accumulated as industrial waste at the consumption of coal, petroleum, and natural gas or in fertilizer and materials for construction. (Nakanishi, T.)

  18. Green commercial building insurance in Malaysia

    Science.gov (United States)

    Yang, Yu Xin Ou; Chew, Boon Cheong; Loo, Heoy Shin; Tan, Lay Hong

    2017-03-01

    Green building construction is growing tremendously globally even in Malaysia. Currently, there are approximate 636 buildings have registered and to be certified with Green Building Index. Among these buildings, 45 buildings have already fulfilled the requirements and fully certified. The other buildings still under provisional certification stage. Malaysia had adopted Green Building Index in 2009 to support a move to promote green building concept. Malaysia starts to move towards green building because Malaysian construction and building industry realizes that both energy consumed and waste produced are reduced without irreversible impacts to ecosystems. Consequently, insurance companies such as Fireman's Fund from America has started the green building insurance policies for their green building in the year of 2006, while Malaysia still remain the coverage for green buildings using conventional property insurance. There are lacks of efforts to be seen from insurance companies to propose green building insurance for these green buildings. There are a few factors which can take into consideration for insurance companies to start the very first green building insurance in Malaysia. Although there are challenges, some efficient strategies have been identified to overcome the problems. The methods used in this research topic is qualitative research. The results obtained shows that green commercial building insurance has a huge business opportunity in Malaysia because the number of green commercial buildings are increasing tremendously in Malaysia. It is a favor to implement green building insurance in Malaysia. Furthermore, insurance companies can consider to add in extra coverage in standard building policy to provide extra protection for non-certified green buildings which have the intention to rebuilt in green when damage happens. Generally, it is very important to introduce green commercial buildings insurance into Malaysia so that all of the green commercial

  19. The potential danger of negative free publicity for the consumer-brand relationship

    NARCIS (Netherlands)

    Tolboom, M.; Bronner, F.; Smit, E.

    2012-01-01

    How can free publicity contribute to building high quality consumer-brand relationships or strong brands? This is an important question because building strong brands is the main objective of brand management. Consumers are more willing to receive communication messages from strong brands (Smit et

  20. Building a capacity building manual

    CSIR Research Space (South Africa)

    Clinton, DD

    2010-02-01

    Full Text Available Organizations 2010 Building a capacity building manual Daniel D. Clinton, Jr., P.E., F.NSPE Chair, WFEO Capacity Building Committee Dr Andrew Cleland, FIPENZ, Chief Executive, IPENZ, NZ Eng David Botha, FSAICE, Executive Director, SAICE, SA Dawit... 2010 Tertiary level University curricula Coaches and mentors Facilities EXCeeD Remuneration of Academics Experiential training Outreach to Students Students chapters Young members forum World Federation of Engineering Organizations 2010 Post...

  1. Solving no-wait two-stage flexible flow shop scheduling problem with unrelated parallel machines and rework time by the adjusted discrete Multi Objective Invasive Weed Optimization and fuzzy dominance approach

    Energy Technology Data Exchange (ETDEWEB)

    Jafarzadeh, Hassan; Moradinasab, Nazanin; Gerami, Ali

    2017-07-01

    Adjusted discrete Multi-Objective Invasive Weed Optimization (DMOIWO) algorithm, which uses fuzzy dominant approach for ordering, has been proposed to solve No-wait two-stage flexible flow shop scheduling problem. Design/methodology/approach: No-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times and probable rework in both stations, different ready times for all jobs and rework times for both stations as well as unrelated parallel machines with regards to the simultaneous minimization of maximum job completion time and average latency functions have been investigated in a multi-objective manner. In this study, the parameter setting has been carried out using Taguchi Method based on the quality indicator for beater performance of the algorithm. Findings: The results of this algorithm have been compared with those of conventional, multi-objective algorithms to show the better performance of the proposed algorithm. The results clearly indicated the greater performance of the proposed algorithm. Originality/value: This study provides an efficient method for solving multi objective no-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times, probable rework in both stations, different ready times for all jobs, rework times for both stations and unrelated parallel machines which are the real constraints.

  2. Solving no-wait two-stage flexible flow shop scheduling problem with unrelated parallel machines and rework time by the adjusted discrete Multi Objective Invasive Weed Optimization and fuzzy dominance approach

    International Nuclear Information System (INIS)

    Jafarzadeh, Hassan; Moradinasab, Nazanin; Gerami, Ali

    2017-01-01

    Adjusted discrete Multi-Objective Invasive Weed Optimization (DMOIWO) algorithm, which uses fuzzy dominant approach for ordering, has been proposed to solve No-wait two-stage flexible flow shop scheduling problem. Design/methodology/approach: No-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times and probable rework in both stations, different ready times for all jobs and rework times for both stations as well as unrelated parallel machines with regards to the simultaneous minimization of maximum job completion time and average latency functions have been investigated in a multi-objective manner. In this study, the parameter setting has been carried out using Taguchi Method based on the quality indicator for beater performance of the algorithm. Findings: The results of this algorithm have been compared with those of conventional, multi-objective algorithms to show the better performance of the proposed algorithm. The results clearly indicated the greater performance of the proposed algorithm. Originality/value: This study provides an efficient method for solving multi objective no-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times, probable rework in both stations, different ready times for all jobs, rework times for both stations and unrelated parallel machines which are the real constraints.

  3. Building Web Reputation Systems

    CERN Document Server

    Farmer, Randy

    2010-01-01

    What do Amazon's product reviews, eBay's feedback score system, Slashdot's Karma System, and Xbox Live's Achievements have in common? They're all examples of successful reputation systems that enable consumer websites to manage and present user contributions most effectively. This book shows you how to design and develop reputation systems for your own sites or web applications, written by experts who have designed web communities for Yahoo! and other prominent sites. Building Web Reputation Systems helps you ask the hard questions about these underlying mechanisms, and why they're critical

  4. Consumer Engagement and the Development, Evaluation, and Dissemination of Evidence-Based Parenting Programs

    Science.gov (United States)

    Sanders, Matthew R.; Kirby, James N.

    2012-01-01

    A consumer perspective can contribute much to enhancing the "ecological fit" of population-level parenting interventions so they meet the needs of parents. This approach involves building relationships with consumer groups and soliciting consumer input into the relevance and acceptability of interventions, clarifying the enablers and barriers to…

  5. Bridging the Gap between Designers and Consumers: The Role of Effective and Accurate Personas

    Science.gov (United States)

    Miaskiewicz, Tomasz

    2010-01-01

    Firms now routinely collect information about the needs of their customers, but this information is not sufficiently considered during product design decisions. This research examines the relationship between designers and consumers to build an understanding of how the consumer should be represented to increase the consumer focus during the…

  6. SENSORY AND CONSUMER TESTING LABORATORY

    Data.gov (United States)

    Federal Laboratory Consortium — These laboratories conduct a wide range of studies to characterize the sensory properties of and consumer responses to foods, beverages, and other consumer products....

  7. 76 FR 35721 - Consumer Leasing

    Science.gov (United States)

    2011-06-20

    ... 213 Advertising, Consumer leasing, Consumer protection, Federal Reserve System, Reporting and... contains regulatory documents #0;having general applicability and legal effect, most of which are keyed #0...

  8. Consumer Legislation and E-Commerce Challenges

    Directory of Open Access Journals (Sweden)

    Jason Freeman

    2015-07-01

    Full Text Available Where there is vigorous competition, and consumer confidence, there is economic growth. E-commerce drives both of these but there remain situations where traders exploit technology or consumer behavioural biases, and seek to compete on the wrong things –such as unrealistic up front prices. This harms competition and can reduce consumer trust, meaning that consumers consume less. This could occur when traders: i prevent consumers from accessing, assessing or acting on information, and so make the wrong choice; ii take advantage of their superior understanding of technology to collect data or money from consumers; iii abuse the advantages of the internet (ease of set up, cross jurisdictional reach, access to markets to misrepresent the price, the quality, the range of products on offer, or the service you will get.Firms should therefore behave responsibly, and not seek to steal an unfair march on their competitors. Effective enforcement incentivises the right behaviours. In order to enforce effectively, EU agencies need to prioritise robustly and build strong competence in internet investigation. Increasingly enforcement activities need to be run as international projects involving non EU enforcers and industry allies –and we need to be willing to protect overseas consumers as well as our own. It is important that the legal framework facilitates, rather than hinders, enforcement –so that for example investigators can easily discover the true identity of traders who run anonymous websites, that they are able to carry out covert test purchases, and so that websites causing harm to the economic interests of consumers can swiftly be removed.There are a number of areas where the EU legislator should consider further work, in order to address those persistent threats that have proven difficult to eradicate so far: clarifying the scope of platform responsibility; extending consumer protection to all individuals; ensuring all CPC enforcers have

  9. Reactor building

    International Nuclear Information System (INIS)

    Ebata, Sakae.

    1990-01-01

    At least one valve rack is disposed in a reactor building, on which pipeways to a main closure valve, valves and bypasses of turbines are placed and contained. The valve rack is fixed to the main body of the building or to a base mat. Since the reactor building is designed as class A earthquake-proofness and for maintaining the S 1 function, the valve rack can be fixed to the building main body or to the base mat. With such a constitution, the portions for maintaining the S 1 function are concentrated to the reactor building. As a result, the dispersion of structures of earthquake-proof portion corresponding to the reference earthquake vibration S 1 can be prevented. Accordingly, the conditions for the earthquake-proof design of the turbine building and the turbine/electric generator supporting rack are defined as only the class B earthquake-proof design conditions. In view of the above, the amount of building materials can be saved and the time for construction can be shortened. (I.S.)

  10. Consumer Engagement in Health IT: Distinguishing Rhetoric from Reality.

    Science.gov (United States)

    Gold, Marsha; Hossain, Mynti; Mangum, Amy

    2015-01-01

    Policymakers want health information technology (health IT) to support consumer engagement to help achieve national health goals. In this paper, we review the evidence to compare the rhetoric with the reality of current practice. Our environmental scan shows that consumer demand exists for electronic access to personal health information, but that technical and system or political barriers still limit the value of the available information and its potential benefits. There is a gap between current reality and the goals for consumer engagement. Actions that may help bridge this gap include: (1) resolving technical barriers to health information exchange (HIE); (2) developing more consumer-centric design and functionality; (3) reinforcing incentives that attract provider support by showing that consumer engagement is in their interest; and (4) building a stronger empirical case to convince decision makers that consumer engagement will lead to better care, improved health outcomes, and lower costs.

  11. Consumer Engagement in Health IT: Distinguishing Rhetoric from Reality

    Science.gov (United States)

    Gold, Marsha; Hossain, Mynti; Mangum, Amy

    2015-01-01

    Rationale: Policymakers want health information technology (health IT) to support consumer engagement to help achieve national health goals. In this paper, we review the evidence to compare the rhetoric with the reality of current practice. Current Reality and Barriers: Our environmental scan shows that consumer demand exists for electronic access to personal health information, but that technical and system or political barriers still limit the value of the available information and its potential benefits. Conclusions and Policy Implications: There is a gap between current reality and the goals for consumer engagement. Actions that may help bridge this gap include: (1) resolving technical barriers to health information exchange (HIE); (2) developing more consumer-centric design and functionality; (3) reinforcing incentives that attract provider support by showing that consumer engagement is in their interest; and (4) building a stronger empirical case to convince decision makers that consumer engagement will lead to better care, improved health outcomes, and lower costs. PMID:26665120

  12. Tourists consuming distance

    DEFF Research Database (Denmark)

    Larsen, Gunvor Riber

    The environmental impact of tourism mobility is linked to the distances travelled in order to reach a holiday destination, and with tourists travelling more and further than previously, an understanding of how the tourists view the distance they travel across becomes relevant. Based on interviews...... contribute to an understanding of how it is possible to change tourism travel behaviour towards becoming more sustainable. How tourists 'consume distance' is discussed, from the practical level of actually driving the car or sitting in the air plane, to the symbolic consumption of distance that occurs when...... travelling on holiday becomes part of a lifestyle and a social positioning game. Further, different types of tourist distance consumers are identified, ranging from the reluctant to the deliberate and nonchalant distance consumers, who display very differing attitudes towards the distance they all travel...

  13. Consumer Energy Atlas

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    This first edition of the Atlas provides, in reference form, a central source of information to consumers on key contacts concerned with energy in the US. Energy consumers need information appropriate to local climates and characteristics - best provided by state and local governments. The Department of Energy recognizes the authority of state and local governments to manage energy programs on their own. Therefore, emphasis has been given to government organizations on both the national and state level that influence, formulate, or administer policies affecting energy production, distribution, and use, or that provide information of interest to consumers and non-specialists. In addition, hundreds of non-government energy-related membership organizations, industry trade associations, and energy publications are included.

  14. Medicalization, markets and consumers.

    Science.gov (United States)

    Conrad, Peter; Leiter, Valerie

    2004-01-01

    This paper examines the impact of changes in the medical marketplace on medicalization in U.S. society. Using four cases (Viagra, Paxil, human growth hormone and in vitro fertilization), we focus on two aspects of the changing medical marketplace: the role of direct-to-consumer advertising of prescription drugs and the emergence of private medical markets. We demonstrate how consumers and pharmaceutical corporations contribute to medicalization, with physicians, insurance coverage, and changes in regulatory practices playing facilitating roles. In some cases, insurers attempt to counteract medicalization by restricting access. We distinguish mediated and private medical markets, each characterized by differing relationships with corporations, insurers, consumers, and physicians. In the changing medical environment, with medical markets as intervening factors, corporations and insurers are becoming more significant determinants in the medicalization process.

  15. Consumer responses to ecolabels

    DEFF Research Database (Denmark)

    Thøgersen, John; Haugaard, Pernille; Olesen, Anja

    2010-01-01

    Purpose - The purpose of this paper is to develop and apply a framework for understanding consumer responses to ecolabelling. Design/methodology/approach - From a consumer perspective, ecolabels are tools for supporting decision making with regard to environmentally significant products. The paper...... process. Starting the adoption process depends on both motivation (intention to buy sustainable fish products) and ability (issue-relevant knowledge). Whether and how quickly the consumer completes the adoption depends on his or her motivation, past experience with using ecolabels, and trust...... scoring highly on both issue-relevant knowledge and motivation are the most likely innovators and early adopters. Their high level of expertise means that they do not need a lot of explanation for understanding the label and its self-relevance and their strong motivation means that they will search...

  16. Building sustainability

    CSIR Research Space (South Africa)

    Mass Media

    2007-11-01

    Full Text Available particu- lar social environment also being awarded. If a building can be used by the community after hours, it should be awarded extra points.” School sports facilities or meeting halls in corporate buildings, are some example. Multi-purpose use..., architect and senior researcher for the CSIR’s Built Environment Unit, the integra- tion of sustainability in building design cannot begin soon enough before it is too late. He says: “Unfortunately nothing is in place in South Africa. For a start...

  17. Building Acoustics

    Science.gov (United States)

    Cowan, James

    This chapter summarizes and explains key concepts of building acoustics. These issues include the behavior of sound waves in rooms, the most commonly used rating systems for sound and sound control in buildings, the most common noise sources found in buildings, practical noise control methods for these sources, and the specific topic of office acoustics. Common noise issues for multi-dwelling units can be derived from most of the sections of this chapter. Books can be and have been written on each of these topics, so the purpose of this chapter is to summarize this information and provide appropriate resources for further exploration of each topic.

  18. Energy - efficient buildings in pakistan

    International Nuclear Information System (INIS)

    Sohail, M.; Qureshi, M.U.D.

    2011-01-01

    Pakistan is one of the countries with the highest energy consumption for domestic use. Annual energy consumption by the domestic sector is 45.9 % of the total, while the industrial sector, consumes about 27.5%. About half of the total energy consumed is used in buildings and/or heating, ventilation and air-conditioning (HVAC) and lighting appliances. The energy consumed for the same purposes in China and UK is 25 to 30 % and 40 %, respectively, even in extreme weather conditions. Energy deficiency in Pakistan is approximately 5,000 MWe, which results in worst load-shedding in summers and, lately, even in winters. Building new energy sources like dams, coal power plants and renewable energy power projects are some possible solutions, but these are time taking and need at least 2 to 6 years to complete, depending upon the nature of the project. Fast development of energy-efficient buildings is, therefore, necessary to deal with exacerbating energy-crisis and related environmental impact in Pakistan. Innovations in the prevailing building-design will help the country in reducing the energy burden. These innovations may include improved architectural designs, energy-efficient building materials, electrical appliances and implementation of building energy-efficiency codes. In 1987, the National Energy Conservation Centre (ENERCON), was established under Ministry of Environment, Government of Pakistan, with the aim to build awareness among the masses for energy conservation, and to make policies regarding energy-conservation structures in the country. But no policy regarding building energy codes has been introduced by ENERCON till now. In collaboration with Pakistan Engineering Council (PEC), ENERCON has recently finalized the Building Energy Code of Pakistan Energy Provisions 2011 for which statutory notification is under process for necessary amendment in the building by-laws. The implementation of this Energy Code will result in 25 to 30 % of energy savings in the

  19. Incorporating Transformative Consumer Research into the Consumer Behavior Course Experience

    Science.gov (United States)

    Petkus, Ed, Jr.

    2010-01-01

    In contrast to understanding consumer behavior for the benefit of business organizations, transformative consumer research (TCR) seeks to understand consumer behavior for the benefit of consumers themselves. Following Mari's (2008) call for the incorporation of TCR in doctoral programs in marketing, this article outlines the relevance of TCR to…

  20. Facilitating consumer participation: an approach to finding the 'right' consumer.

    Science.gov (United States)

    Happell, Brenda

    2010-01-01

    Contemporary health care increasingly dictates that consumers of services should become active participants in the health care system. This has placed responsibility on administrators, managers and clinicians to include consumers in key strategic and decision making initiatives. However, this direction has not been accompanied by clear policies or guidelines. Consequently confusion about selecting consumers able to provide valuable input is identified as a barrier to active consumer involvement. The purpose of this paper is to address some concerns raised in the quest to find the "right" consumer, including: finding a consumer without an axe to grind; ensuring the consumer is representative of broader views; health professionals as consumer representatives. While these concerns are common they have not yet been extensively debated and discussed in the broader Literature. Strategies necessary to support consumers in participatory roles are also considered and the controversial subject of financial remuneration for consumers is also explored.

  1. Building Data

    Data.gov (United States)

    Town of Cary, North Carolina — Explore real estate information about buildings in the Town of Cary.This file is created by the Town of Cary GIS Group. It contains data from both the Wake, Chatham...

  2. Older Consumers Safety Test

    Science.gov (United States)

    ... 한국어 Español ภาษาไทย Tiếng Việt Text Size: Decrease Font Increase Font Contact CPSC Consumers: Businesses: Report an Unsafe Product ... can become entrapped and suffocate in older, latch-type freezers, refrigerators, dryers and coolers. GFCI Fact Sheet ...

  3. Consumer rationality in choice

    NARCIS (Netherlands)

    Conlon, B.J.

    2001-01-01

    The dissertation concentrates on consumer choice and the ability of current modelling approaches to capture the underlying behaviour of the individual decision-makers. The standard assumption of a rational utility maximising individual and its implications for observed behaviour are examined and

  4. Mapping online consumer search

    NARCIS (Netherlands)

    Bronnenberg, B.J.; Kim, J.; Albuquerque, P.

    2011-01-01

    The authors propose a new method to visualize browsing behavior in so-called product search maps. Manufacturers can use these maps to understand how consumers search for competing products before choice, including how information acquisition and product search are organized along brands, product

  5. Sustainable Consumer Voices

    DEFF Research Database (Denmark)

    Klitmøller, Anders; Rask, Morten; Jensen, Nevena

    2011-01-01

    Aiming to explore how user driven innovation can inform high level design strategies, an in-depth empirical study was carried out, based on data from 50 observations of private vehicle users. This paper reports the resulting 5 consumer voices: Technology Enthusiast, Environmentalist, Design Lover...

  6. Consuming a Machinic Servicescape

    OpenAIRE

    Hietanen, Joel; Andéhn, Mikael; Iddon, Thom; Denny, Iain; Ehnhage, Anna

    2016-01-01

    Consumer encounters with servicescapes tend to emphasize the harmonic tendency of their value-creating potential. We contest this assumption from a critical non-representational perspective that foregrounds the machinic and repressive potentiality of such con- sumption contexts. We offer the airport servicescape as an illustrative example. 

  7. CONSUME: users guide.

    Science.gov (United States)

    R.D. Ottmar; M.F. Burns; J.N. Hall; A.D. Hanson

    1993-01-01

    CONSUME is a user-friendly computer program designed for resource managers with some working knowledge of IBM-PC applications. The software predicts the amount of fuel consumption on logged units based on weather data, the amount and fuel moisture of fuels, and a number of other factors. Using these predictions, the resource manager can accurately determine when and...

  8. Hermeneutics and Consumer Research.

    OpenAIRE

    Arnold, Stephen J; Fischer, Eileen

    1994-01-01

    This article reviews the nature of hermeneutic philosophy and the assumptions and features of a textual interpretation consistent with this perspective. The relationship of hermeneutic philosophy to the interpretive and critical theory traditions in consumer research is also discussed. Copyright 1994 by the University of Chicago.

  9. Consumer Product Category Database

    Science.gov (United States)

    The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

  10. Consumer financial behavior

    NARCIS (Netherlands)

    van Raaij, W.F.

    2014-01-01

    Consumer financial behavior is a domain between micro-economics, behavioral finance, and marketing. It is based on insights and behavioral theories from cognitive, economic, and social psychology (biases, heuristics, social influences), in the context of and sometimes in conflict with micro-economic

  11. Research in consumer behaviour

    DEFF Research Database (Denmark)

    Grunert, Klaus G.

    1988-01-01

    The present state of consumer behavior research is analysed here by Klaus Grunert, of the Aarhus Graduate School of Management, Denmark. Against the background of crisis in the existing research paradigm, he suggests a number of possible new directions in the field, at the same time emphasizing...

  12. Smart Consumer Lesson Plans.

    Science.gov (United States)

    New Jersey Consortium for Consumer Education, Newark.

    Lesson plans are provided for use with different populations of pre-K through senior high school students in four different areas of consumer education. Eight units in advertising are included: A First Look at Ads (pre-K-Grade 3), Don't Judge a Book by Its Cover (Grades 1-3), Fatal Distraction (Junior High), Package Labeling (Junior High), Product…

  13. Consuming the Exotic Other.

    Science.gov (United States)

    Lalvani, Suren

    1995-01-01

    Explores the multiple and heterogeneous deployment of the Other within discourses that intersect and contest each other. Shows how the 19th century discourse of "le femme orientale," which informed the Romantic critique of capitalism, was recuperated in a hegemonic manner to promote an expanding consumer culture. Discusses the colonial…

  14. Older Consumers in Malaysia

    Directory of Open Access Journals (Sweden)

    David R. Phillips

    2007-07-01

    Full Text Available The main objective of this study was to understand the concerns and problems faced by older people in an industrializing middle-income country, Malaysia, in their process of acquiring products to meet their everyday needs. Respondents aged 55 and over were interviewed in eight states throughout Peninsular Malaysia providing 1356 usable questionnaires; two-thirds from urban and one-third from rural areas. Education, health status, and life satisfaction were recorded. Service patronage behaviour was examined for four main categories of commonly-sought consumer goods: groceries, health supplements, apparel, eating outlets, plus selected services (public transport, vacation packages and financial services. The findings showed that older adults in Malaysia are rather discerning consumers. Many respondents are price conscious and have developed consumer attitudes with regard to attitude of staff and assistance rendered. Many display a good ability to discriminate and to select, especially on the basis of price and durability of products and many appear to be acting as effectively as consumers in any other age group.

  15. 76 FR 77981 - Build-A-Bear Workshop, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2011-12-15

    ... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 12-C0004] Build-A-Bear Workshop, Inc... 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with Build-A-Bear Workshop..., Build-A-Bear Workshop, Inc. (``Build-A-Bear'') and staff of the United States Consumer Product Safety...

  16. Consumers as co-developers

    DEFF Research Database (Denmark)

    Jeppesen, Lars Bo; Molin, Måns J.

    Abstract: This study describes a process in which a firm relies on an external consumer communityfor innovation. While it has been recognized that users may sometimes innovate, little is known aboutwhat commercial firms can do to motivate and capture such innovations and their related benefits...... firms purposively can do to generate consumer innovation efforts. An explorative casestudy shows that consumer innovation can be structured, motivated, and partly organized by acommercial firm that lays out the infrastructure for interactive learning by consumers in a publicKeywords: Product Development......, Consumer-to-Consumer Interaction, Learning, Consumer Innovation, Community, User-toolkits. JEL code(s): L21; L23; O31; O32...

  17. Federal Buildings Supplemental Survey 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    The Energy Information Administration (EIA) of the US Department of Energy (DOE) is mandated by Congress to be the agency that collects, analyzes, and disseminates impartial, comprehensive data about energy including the volume consumed, its customers, and the purposes for which it is used. The Federal Buildings Supplemental Survey (FBSS) was conducted by EIA in conjunction with DOE`s Office of Federal Energy Management Programs (OFEMP) to gain a better understanding of how Federal buildings use energy. This report presents the data from 881 completed telephone interviews with Federal buildings in three Federal regions. These buildings were systematically selected using OFEMP`s specifications; therefore, these data do not statistically represent all Federal buildings in the country. The purpose of the FBSS was threefold: (1) to understand the characteristics of Federal buildings and their energy use; (2) to provide a baseline in these three Federal regions to measure future energy use in Federal buildings as required in EPACT; and (3) to compare building characteristics and energy use with the data collected in the CBECS.

  18. Building Brand Power

    Science.gov (United States)

    Lakshmi, S.; Muthumani, S., Dr.

    2017-05-01

    Brand power is established through brand awareness. It’s all about making consumers familiar about their products and services. Marketing strategies should make the customers extend the positive approach towards brand and continue through repeated purchases. There is a triple perspective approach to investigate the brand awareness in this research. The brand awareness and brand equity are studied and the relationship between those are analyzed. This also drills down about the brand performance and knowledge with awareness which tries to find out the brands value and utility among the public. Continuous improvement on package design, quality and buying experience will lead to customer loyalty and preference. Branding should happen though creative ads, eye catchers and special campaigns. Brand awareness is the extent to which consumers are familiar with their product or services. Power of a brand is resides in the minds of the customers. To build a strong brand, it is one of the great challenge for the marketers to ensure that customers have the right experiences with products and services and various marketing programs. So that tenderness, beliefs, perspective, perception and so on linked to the brand. If we are presenting the brand with no enthusiasm or spunk, people are going to forget about our brand. Even though that may seem harsh, it’s the naked truth in today’s marketing world. Brand must reach out to the community by special events, creating campaigns to keep the brand relevant also offer customer a unique experience. Here we study about the brand consciousness and to identify the cohesion between brand awareness with knowledge and performance and also to assess the effect of brand awareness on consumer purchase. In this study we necessary statistical tools like chi-square test ad t-test has been used to analyse the collected data. It is highly recommend to increase brand awareness, the marketers are constantly required to build brand awareness both

  19. Should Marketers Try to Change Consumers Unfavourable Attitude for their Product into Favourable?

    OpenAIRE

    Sunday O. E. Ewah; Patrick M. Igbaji; Christian I. Umeh

    2014-01-01

    This is an empirical study of the interplay between consumers' attitude toward marketers’ products and marketers; wish to elicit favourable buying behaviour from the consumer. According to the study the process of this transformation of consumer’s attitude is not quite easy. The marketers have to put their acts together by producing products to match consumers attitude or build a gradual change that will result to favourable buying decision from the consumer.

  20. Consumer protection in European Union

    OpenAIRE

    Bartlová, Daniela

    2009-01-01

    The consumer protection is a very actual topic in the european policy. It is necessary for the right function of the internal market. The document mentions the development of the consumer protection policy - the past and the future strategy. The valid legislation is listed and also mentioned is the Proposal for a Directive on Consumer Rights. It gives an overview of european consumer organisations and their function . There are also mentioned some alternatives of the consumer's redress. Docum...

  1. CONSUMER BEHAVIOUR TOWARDS ELECTRIC FANS

    OpenAIRE

    Inderpreet Singh

    2017-01-01

    The study of consumer behaviour develops great interest for consumers, students, scientists, and marketers. As consumers, we need insights into our own consumption related decisions: what we buy, why we buy, and how we buy. The aim of the study is to cover entire research about consumer behaviour towards electric fans and different factors affecting their buying decision. A sample of 200 consumers of electric fans is taken. Questionnaire has been analysed with the help of pie diagram & bar ch...

  2. Rational compensating model of behavior of elderly consumers

    OpenAIRE

    Astashova Julija Vladimirovna

    2014-01-01

    In article relevance of revision of the upper age brackets of a target segment of business in the conditions of population aging is proved. Practice of domestic and foreign business at interaction with consumers of the senior age group is considered. On the basis of allocation of specific characteristics of behavior of elderly consumers by the author the system of requirements is developed, and also the rational compensating model of the behavior, allowing to build effective processes of inte...

  3. INL High Performance Building Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Jennifer D. Morton

    2010-02-01

    High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, “Federal Leadership in Environmental, Energy, and Economic Performance” [2009], EO 13423, “Strengthening Federal Environmental, Energy, and Transportation Management” [2007], and DOE Order 430.2B, “Departmental Energy, Renewable Energy, and Transportation Management” [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design

  4. Pusat Tenaga Malaysia's Zero Energy Office (ZEO) Building

    DEFF Research Database (Denmark)

    Tang, C.K.; Reimann, Gregers Peter; Kristensen, Poul Erik

    Technical Review of the Zero Energy Office building in Malaysia. The building, which has an energy index of 50 kWh/m2/year, reaches a net annual energy of zero through the use of building integrated photovoltaic panels. For reference, ordinary offices in Malaysia consume 200 - 300 kWh/m2/year...

  5. Thermal comfort in residential buildings by the millions

    DEFF Research Database (Denmark)

    Østergård, Torben; Maagaard, Steffen; Jensen, Rasmus Lund

    2016-01-01

    In Danish building code and many design briefings, criteria regarding thermal comfort are defined for “critical” rooms in residential buildings. Identifying the critical room is both difficult and time-consuming for large, multistory buildings. To reduce costs and time, such requirement often...

  6. Recipes for porous building materials, More with less

    NARCIS (Netherlands)

    Brouwers, H.J.H.; Fischer, H.-B.; Bode, K.-A.; Beuthan, C.

    2012-01-01

    The building sector, comprising both buildings and infrastructure, is the largest consumer of energy and materials. As well as the huge amount of raw materials involved, enormous amounts of energy are also used for the production and transport of raw materials, building materials and products. Among

  7. Competence Building

    DEFF Research Database (Denmark)

    Borrás, Susana; Edquist, Charles

    The main question that guides this paper is how governments are focusing (and must focus) on competence building (education and training) when designing and implementing innovation policies. With this approach, the paper aims at filling the gap between the existing literature on competences...... on the one hand, and the real world of innovation policy-making on the other, typically not speaking to each other. With this purpose in mind, this paper discusses the role of competences and competence-building in the innovation process from a perspective of innovation systems; it examines how governments...... and public agencies in different countries and different times have actually approached the issue of building, maintaining and using competences in their innovation systems; it examines what are the critical and most important issues at stake from the point of view of innovation policy, looking particularly...

  8. Building Procurement

    DEFF Research Database (Denmark)

    Andersson, Niclas

    2007-01-01

    evolves from a simple establishment of a contractual relationship to a central and strategic part of construction. The authors relate to cultural, ethical and social and behavioural sciences as the fundamental basis for analysis and understanding of the complexity and dynamics of the procurement system......‘The procurement of construction work is complex, and a successful outcome frequently elusive’. With this opening phrase of the book, the authors take on the challenging job of explaining the complexity of building procurement. Even though building procurement systems are, and will remain, complex...... despite this excellent book, the knowledge, expertise, well-articulated argument and collection of recent research efforts that are provided by the three authors will help to make project success less elusive. The book constitutes a thorough and comprehensive investigation of building procurement, which...

  9. Exposure from consumer products

    International Nuclear Information System (INIS)

    Sadagopan, Geetha

    1998-01-01

    Consumer products containing radioactive material, are available in the market place to any member of public as off the shelf item and are intended for unrestricted use by them at home or for their personal use. Radioactivity may be involved in the product for several reasons: 1. ionising radiation from the radioactive material forms the basis of the particular functioning of the product like radioisotopes in smoke detectors, radio-luminous dials, etc.; 2. chemical/spectroscopic characteristics of the radioactive material and not its radioactivity is the basis for the functional property of the product like thoriated gas mantles, uranium in glass enamels, etc. and 3. radioactive materials could be naturally occurring in consumer products, but could increase in concentration after processing like increased uranium or thorium concentrations after the processing of rare earth oxides

  10. Transaction Costs (TCs) in Building Regulations and Control for Green Buildings : Case Study of Hong Kong

    NARCIS (Netherlands)

    Fan, Ke; Qian, K.; Chan, EHW; Kähkönen, Kalle; Keinänen, Marko

    2016-01-01

    About 40% of global energy consumption and nearly one-third of global CO2 emissions are on account of buildings. In Hong Kong, buildings consume up to 90% of electricity during construction and operation, where all the design and construction of private developments is subject to control under the

  11. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    technologies and in this article these processes will be investigated from three different perspectives: an historical perspective of how new technologies have entered homes, a consumer perspective of how both houses and new technologies are purchased and finally, as the primary part of the article, a user...... perspective of how routines develop while these technologies are being used. In the conclusion these insights are discussed in relation to possible ways of influencing routines....

  12. Emotions and Consumer Behavior

    OpenAIRE

    Andrade, Eduardo; Gururangan, Kapil; Iantorno, Stefano; Feng, Harvey; Cherone, Jennifer; Sawant, Manali; Neogi, Sushrita; Bhat, Prashant; Lukus, Alan

    2012-01-01

    Professor Eduardo Andrade received his Ph.D. in Marketing from the University of Florida in 2004 before coming to theHaas School of Business. He studies the impact of emotions on consumer decision making. One of his studies publishedin 2009 shifted the concept of emotions from transient effects to long-term processes and his recent work is movinginto the burgeoning field of decision neuroscience, which uses neuroscience tools to study economic decision-making.When Berkeley Scientific Journal ...

  13. MANIPULATING CONSUMERS THROUGH ADVERTISING

    Directory of Open Access Journals (Sweden)

    Nicoleta -Andreea Neacşu

    2012-12-01

    Full Text Available Marketing communication has evolved steadily in the direction of increasing complexity and increasing volume of funds needed to run their own actions. More than ever, consumers are exposed to an overwhelming variety of sources and communication tehniques, the information received being numerous, diverse and polyvalent. The desire to make more efficient the marketing communication activity urges the broadcasters to encode messages, to use effective means of propagation in order to obtain a high degree of control on receptors and to influence the consumption attitudes. Between the means used for this purpose, manipulation tehniques are well known. This paper highlights the main conclusions drawn as a result of a quantitative marketing research on the adult population from Braşov in order to identify the attitudes and opinions of consumers from Braşov regarding the manipulation techniques used by commercial practices and advertising.The results of the research have shown that 82% of the respondents buy products in promotional offers, and 18% choose not to buy these products and 61% of the respondents consider that they have not been manipulated not even once, while only 39% believe that they have been manipulated at least once through advertising or commercial practices. Advertisements on TV have a strong influence on consumers, 81% of the respondents considering that at least once they have bought a product because of a TV commercial.

  14. Consumers' quality perception

    DEFF Research Database (Denmark)

    Bech, Anne C.; Grunert, Klaus G.; Bredahl, Lone

    2001-01-01

    Much has been said about food quality, and the disussion is endless because the notion of quality changes along with the changes in our life and society. This underlines the complexity of the issue of food quality. Today food production in Europe is highly concentrated, and the global market is r...... framework, the Total Food Quality Model, which we believe is useful in understanding consumers perception of food quality. We will then illustrate applications of the model using two recent examples of the quality perception of meat and fish.......Much has been said about food quality, and the disussion is endless because the notion of quality changes along with the changes in our life and society. This underlines the complexity of the issue of food quality. Today food production in Europe is highly concentrated, and the global market...... of quality and the ability of producers to react to changes in consumers' perception of quality may form the basis of market success or failure, independent of whether you are a local or multinational producer. This chapter deals with the analysis of consumers' quality perception. We will introduce a general...

  15. Consumer perception of risk

    DEFF Research Database (Denmark)

    Scholderer, Joachim

    2001-01-01

    Scientists and regulators are regularly baffled by public responses to risk, especially when the issue at stake seemed unproblematic or at least technocratically solvable as long as it was only discussed within the expert community. In terms of such polarizations, the 1970s were the age of dissen...... these perceptions related to consumers' attitudes and choice behavior....... over nuclear power, while the 1990s saw the emergence of gene technology as an issue of public debate. The first decade of the new millennium aspires to become the age of food safety, and once again, a major research effort is made to find out how consumers' confidence can be restored. Brewing......, as a particular branch of food manufacturing, has in the past been able to dodge implication in major risk debates. The latest crisis in a related industry was the temporary banning of several brands of the Coca-Cola Co. in 1999 in Belgium following symptoms of nausea and vomiting amongst people who had consumed...

  16. New insights into consumer-led food product development

    DEFF Research Database (Denmark)

    Costa, Ana I. A.; Jongen, W.M.F.

    2006-01-01

    industry are described. Contrary to previous optimistic views, it is put forward that without significant changes taking place in the mindset of the organizations involved in Europe's food R&D, the way forward for consumer-led innovation strategies in the agri-business sector will be long and hard.......This paper builds upon a review of relevant marketing, consumer science and innovation management literature to introduce the concept of consumer-led new product development and describe its main implementation stages. The potential shortcomings of this concept's application in European food...

  17. Public building retrofit

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    This report demonstrates the economic viability of cost effective, energy efficient retrofitting of a public building. The Whitehorse Chamber of Commerce in conjunction with the Canada/Yukon Conservation and Renewable Energy Demonstration Project undertook the demonstration project. The energy conservation features included increasing the insulation in the walls and ceiling, providing a 6 mm polyethylene air-vapour barrier and installing triple glazed windows on the north side. Also, an air-to-air heat exchanger and a combination wood/oil furnace were installed. However, neither of these latter features have been used since the completion of the renovations. In total, the features cost approximately $26,300. The energy conservation measures yielded less energy savings than expected. Although the T.C. Richard building is now consuming less heating oil (33% less); the amount of electricity used has increased by 146.6%. Overall the building achieved a 23% reduction in heating consumption (this figure takes into account the heat energy generated from the lighting system). Reasons for the low yield in energy savings can be attributed to the improper installation of the air-vapour barrier and not using the existing wood boiler. 1 fig. 5 tabs.

  18. Teaching Consumers To Use the Internet To Make Consumer Decisions.

    Science.gov (United States)

    O'Neill, Barbara

    1999-01-01

    An adult-education course familiarized participants with online consumer resources. Beyond teaching the mechanics of Internet use, it showed how to use the Internet as a tool for consumer decision making. (SK)

  19. Market Opportunities and Barriers for Smart Buildings

    DEFF Research Database (Denmark)

    Ma, Zheng; Badi, Adrian; Jørgensen, Bo Nørregaard

    2016-01-01

    Buildings consume up to 42% of the global electricity and the primary emitter of greenhouse gas on the planet. Building efficiency is the largest growing segment in the US, the estimated global revenue by the building efficiency sector is around 210 million dollars, and constantly increases since...... 2011. Much research already shows the players' passive and conservative attitudes to enter into the energy efficiency market. Especially there are obstacles for the construction companies to redesign their business model from the traditional building business to the smart building market. This paper...... conducts a qualitative approach with primary and secondary data to investigate the Barriers and opportunities of the construction companies into the smart building market. The result shows the willingness of the players to involve the building efficiency business with huge potential monetary benefits...

  20. Existing buildings

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2014-01-01

    their homes. These policy measures include building regulations, energy tax and different types of incentives and information dissemination. The conclusion calls for new and innovative policy measures to cope with the realities of renovations of owner-occupied houses and how energy efficiency improvement...

  1. Building Sandcastles

    DEFF Research Database (Denmark)

    Jensen, Steffen Moltrup Ernø; Korsgaard, Steffen; Shumar, Wes

    of entrepreneurship education. Our theoretical and methodological approach builds on Actor-Network Theory. The empirical settings of our study consist of two entrepreneurship courses which differ in terms of temporal extension and physical setting. Data is collected using observation and interview techniques. Our...

  2. Sustainable Buildings

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Elle, Morten

    The scientific community agrees that: all countries must drastically and rapidly reduce their CO2 emissions and that energy efficient houses play a decisive role in this. The general attitude at the workshop on Sustainable Buildings was that we face large and serious climate change problems...

  3. Localization--the revolution in consumer markets.

    Science.gov (United States)

    Rigby, Darrell K; Vishwanath, Vijay

    2006-04-01

    Standardization has been a powerful strategy in consumer markets, but it's reached the point of diminishing returns. And diversity is not the only chink in standardization's armor: Attempts to build stores in the remaining attractive locations often meet fierce resistance from community activists. From California to Florida to New Jersey, neighborhoods are passing ordinances that dictate the sizes and even architectural styles of new shops. Building more of the same--long the cornerstone of retailer growth--seems to be tapped out as a strategy. Of course, a company can't customize every element of its business in every location. Strategists have begun to use clustering techniques to simplify and smooth out decision making and to focus their efforts on the relatively small number of variables that usually drive the bulk of consumer purchases. The customization-by-clusters approach, which began as a strategy for grocery stores in 1995, has since proven effective in drugstores, department stores, mass merchants, big-box retailers, restaurants, apparel companies, and a variety of consumer goods manufacturers. Clustering sorts things into groups, so that the associations are strong between members of the same cluster and weak between members of different clusters. In fact, by centralizing data-intensive and scale-sensitive functions (such as store design, merchandise assortment, buying, and supply chain management), localization liberates store personnel to do what they do best: Test innovative solutions to local challenges and forge strong bonds with communities. Ultimately, all companies serving consumers will face the challenge of local customization. We are advancing to a world where the strategies of the most successful businesses will be as diverse as the communities they serve.

  4. Consuming the Fashion Tattoo

    DEFF Research Database (Denmark)

    Kjeldgaard, Dannie; Bengtsson, Anders

    2005-01-01

    From being considered a marginal and sometimes deviant behavior, the consumption of tattoos has become a mass consumer phenomenon. As tattoos have gained in popularity, it can be expected that the reasons for why people get tattoos have shifted as well. This paper explores consumers’ motivations...... for getting a fashion tattoo and the meaning associated with its consumption. Through phenomenological interviews with fashion tattooees, the themes 'art/fashion’, 'personalization and biographing’, 'contextual representation of self’, and 'meanings?’ are related to existing consumption theory....

  5. Consumer's Guide to Radon Reduction

    Science.gov (United States)

    ... Labs and Research Centers Radon Contact Us Share Consumer's Guide to Radon Reduction: How to Fix Your ... See EPA’s About PDF page to learn more. Consumer's Guide to Radon Reduction: How to Fix Your ...

  6. Gloves-off Consumer Economics.

    Science.gov (United States)

    McGowan, Daniel A.

    1992-01-01

    The evolution of the consumer economics course at Hobart and William Smith College demonstrates its mainstreaming in the liberal arts curriculum. The course uses principles of economics to address broad and often controversial consumer issues. (SK)

  7. Method for simulating predictive control of building systems operation in the early stages of building design

    DEFF Research Database (Denmark)

    Petersen, Steffen; Svendsen, Svend

    2011-01-01

    A method for simulating predictive control of building systems operation in the early stages of building design is presented. The method uses building simulation based on weather forecasts to predict whether there is a future heating or cooling requirement. This information enables the thermal...... control systems of the building to respond proactively to keep the operational temperature within the thermal comfort range with the minimum use of energy. The method is implemented in an existing building simulation tool designed to inform decisions in the early stages of building design through...... parametric analysis. This enables building designers to predict the performance of the method and include it as a part of the solution space. The method furthermore facilitates the task of configuring appropriate building systems control schemes in the tool, and it eliminates time consuming manual...

  8. FRAGMENTATION ISSUE IN MALAYSIAN INDUSTRIALISED BUILDING SYSTEM (IBS PROJECTS

    Directory of Open Access Journals (Sweden)

    MOHD NASRUN MOHD NAWI

    2014-02-01

    Full Text Available As a developing country, Malaysian is currently driving for implementing a new or modern construction method, the Industrialised Building System (IBS, as an alternative towards enhancing construction performance. Currently, most of the IBS project developments in Malaysia are still conducted by using the traditional construction process approach. This traditional construction process has been widely criticised for its fragmented approach to project delivery and its failure to form effective teams thus created a number of issues such as reworks, time delay, rising costs, lack of communication and coordination, and wastages. This paper through literature review aims to highlight this fragmentation issue and clarify how far it affects the process of IBS implementation. Suggestions on how an integrated approach in design and construction in order to minimise the fragmentation gaps will be concluded.

  9. Corporate sports sponsorship: Exploring the relationships between consumer perception, consumer response and sponsor’s brand reputation – evidence from Malaysia

    OpenAIRE

    Hambali, A; Nguyen, B; Ismail, N; Syed Alwi, SF

    2016-01-01

    Corporate organisations view sponsorships, particularly in sporting events, as increasingly important in marketing, branding and reputation building. This chapter explores: (1) the relationship between a multidimensional measure of consumer perception of sports sponsorship, (2) consumers’ response towards sponsorships, and; (3) the reputation of sponsors among Malaysian consumers. A survey was undertaken to assess the general view of sponsorships from the local sponsorship audiences. Findings...

  10. River delta shoreline reworking and erosion in the Mediterranean and Black Seas: the potential roles of fluvial sediment starvation and other factors

    Directory of Open Access Journals (Sweden)

    Manon Besset

    2017-09-01

    Full Text Available The Mediterranean basin (including the Black Sea is characterized by a plethora of deltas that have developed in a wave-influenced setting. Many of these deltas are sourced in sediments by river catchments that have been variably dammed. The vulnerability status of a selection of ten deltas subject to different levels of reduction in fluvial sediment supply following damming was analysed by quantifying changes in delta protrusion area and protrusion angle over the last 30 years. The rationale for choosing these two metrics, which do not require tricky calculations of longshore bedload transport volumes and river ‘influence’, is that as sediment supply wanes, increasing relative efficiency of waves leads to longshore redistribution of reworked sediments and progressive ‘flattening’ of the delta protrusion. The results show that eight of the ten deltas (Nile, Rhône, Ebro, Ceyhan, Arno, Ombrone, Moulouya, Medjerda are in erosion, whereas two (Danube, Po show stability, but the statistical relationship between change in delta protrusion area and sediment flux reduction is poor, thus suggesting that the role of dams in causing delta shoreline erosion may have been over-estimated. But this poor relationship could also be due to a long temporal lag between dam construction and bedload removal and transport to the coast downstream of dams, and, where the delta protrusion is being eroded, to bedload trapping by shoreline engineering structures and by elongating delta-flank spits. Other potential influential factors in shoreline change include subsidence, sea-level rise, storminess, exceptional river floods, and managed sediment releases downstream of dams. A longer observation period and high-resolution sediment-budget studies will be necessary to determine more definitively to which extent continued trapping of sediment behind dams will impact overall delta stability in the Mediterranean and Black Seas. Mitigation of delta erosion is likely to

  11. BEHAVIOR ANALYSIS OF CONSUMER COMPLAINT

    Directory of Open Access Journals (Sweden)

    Andrie Prasetyo

    2016-05-01

    Full Text Available Complaining is one form of communication for consumers to express their dissatisfaction. Understanding the consumer complaint behavior is an important thing for businesses; however, it is not easy to do. The initial step in understanding this behavior of consumer complaints is to map consumers based on their behavior of complaints and analyze the factors that influence this. This study examines the complaint behavior of consumers in Cibubur who have experienced dissatisfaction with a product.  The objectives of this study are to map the consumer complaint behavior and identify its relationship with various factors such as consumer demographics, personality, attitude to businesses, attribution of the causes of dissatisfaction, and product attributes. A crosstab descriptive analysis method was used to map the consumers, while the Pearson correlation analysis methods was used to analyze consumer complaint behavioral relationships with various factors. The results of this study indicated that consumers in Cibubur based on their complaint behavior are classified into four groups: passive, voicers, irates and activist. The passive consumers dominate the category with a percentage of 49%.  The voicers, irates, and activist belong to the complaining type and are dominated by young women, with high levels of education and income. Keywords: consumer complaint behavior, product, crosstab, pearson correlation

  12. Consumer Acceptance of Novel Foods

    NARCIS (Netherlands)

    Fischer, A.R.H.; Reinders, M.J.

    2016-01-01

    The success of novel foods depends to a considerable extent on whether consumers accept those innovations. This chapter provides an overview of current knowledge relevant to consumer acceptance of innovations in food. A broad range of theories and approaches to assess consumer response to

  13. Invitation to Consumer Behavior Analysis

    Science.gov (United States)

    Foxall, Gordon R.

    2010-01-01

    This article presents an introduction to consumer behavior analysis by describing the Behavioral Perspective Model of consumer choice and showing how research has, first, confirmed this framework and, second, opened up behavior analysis and behavioral economics to the study of consumer behavior in natural settings. It concludes with a discussion…

  14. 75 FR 78632 - Consumer Leasing

    Science.gov (United States)

    2010-12-16

    ... The new threshold for exempt consumer leases in the CLA goes into effect on July 21, 2011. Accordingly... and 213.4) and when the availability of consumer leases on particular terms is advertised (Sec. 213.7... regulation also contain rules about advertising consumer leases. The information collection pursuant to...

  15. Building economics

    DEFF Research Database (Denmark)

    Pedersen, D.O.(red.)

    Publikationen er på engelsk. Den omfatter alle indlæg på det fjerde internationale symposium om byggeøkonomi, der blev arrangeret af SBI for det internationale byggeforskningsråd CIB. De fem bind omhandler: Methods of Economic Evaluation, Design Optimization, Ressource Utilization, The Building...... Market og Economics and Technological Forecasting in Construction. Et indledende bind bringer statusrapporter for de fem forskningsområder, og det sidste bind sammenfatter debatten på symposiet....

  16. Building technolgies program. 1994 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Selkowitz, S.E.

    1995-04-01

    The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. We have focused our past efforts on two major building systems, windows and lighting, and on the simulation tools needed by researchers and designers to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. In addition, we are now taking more of an integrated systems and life cycle perspective to create cost-effective solutions for more energy efficient, comfortable, and productive work and living environments. More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity-factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout every space in a building, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Window and lighting systems are thus essential components of any comprehensive building science program.

  17. California commercial building energy benchmarking

    Energy Technology Data Exchange (ETDEWEB)

    Kinney, Satkartar; Piette, Mary Ann

    2003-07-01

    Building energy benchmarking is the comparison of whole-building energy use relative to a set of similar buildings. It provides a useful starting point for individual energy audits and for targeting buildings for energy-saving measures in multiple-site audits. Benchmarking is of interest and practical use to a number of groups. Energy service companies and performance contractors communicate energy savings potential with ''typical'' and ''best-practice'' benchmarks while control companies and utilities can provide direct tracking of energy use and combine data from multiple buildings. Benchmarking is also useful in the design stage of a new building or retrofit to determine if a design is relatively efficient. Energy managers and building owners have an ongoing interest in comparing energy performance to others. Large corporations, schools, and government agencies with numerous facilities also use benchmarking methods to compare their buildings to each other. The primary goal of Task 2.1.1 Web-based Benchmarking was the development of a web-based benchmarking tool, dubbed Cal-Arch, for benchmarking energy use in California commercial buildings. While there were several other benchmarking tools available to California consumers prior to the development of Cal-Arch, there were none that were based solely on California data. Most available benchmarking information, including the Energy Star performance rating, were developed using DOE's Commercial Building Energy Consumption Survey (CBECS), which does not provide state-level data. Each database and tool has advantages as well as limitations, such as the number of buildings and the coverage by type, climate regions and end uses. There is considerable commercial interest in benchmarking because it provides an inexpensive method of screening buildings for tune-ups and retrofits. However, private companies who collect and manage consumption data are concerned that the

  18. Food quality and the consumers

    DEFF Research Database (Denmark)

    Lassen, Jesper

    1993-01-01

    Executive Summary: 1. Consumers and professionals in the food sector will differ in the way they view food quality. Professionals have knowledge and resources to establish quality based on objective criteria. Consumers lack both, and they are typically concerned with many different products...... resources, of means of transportation, of time, of knowledge. Consumers' shopping behaviour is therefore an imperfect indicator of the quality consumers want, insufficient way of communicating consumer wishes to the food sector. 3. The fact that the food producer may be separated from the consumer...... certain attributes of food products or materials which may contradict consumer intentions. Economic pressure to reduce costs may lead to deteriorating quality. 5. While the information supplied by the market may be enough to give feed back on products launched based on the trial-and-error method...

  19. Sustainable building versus ecological building

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-04-01

    Full Text Available and sensitivity to a site that are required to efficiently meet the energy needs of a building and occupants with renewable energy (solar, wind, geothermal, etc), designers must apply holistic design principles and take advantage of the free, naturally... monumental waste: the product which they deliver requires resources such as energy and water to operate over its entire life-cycle, a period measured in decades, and often in centuries. Throughout this process, construction activities often result...

  20. Globalization of consumer confidence

    Directory of Open Access Journals (Sweden)

    Çelik Sadullah

    2017-01-01

    Full Text Available The globalization of world economies and the importance of nowcasting analysis have been at the core of the recent literature. Nevertheless, these two strands of research are hardly coupled. This study aims to fill this gap through examining the globalization of the consumer confidence index (CCI by applying conventional and unconventional econometric methods. The US CCI is used as the benchmark in tests of comovement among the CCIs of several developing and developed countries, with the data sets divided into three sub-periods: global liquidity abundance, the Great Recession, and postcrisis. The existence and/or degree of globalization of the CCIs vary according to the period, whereas globalization in the form of coherence and similar paths is observed only during the Great Recession and, surprisingly, stronger in developing/emerging countries.

  1. Radioactivity of Consumer Products

    Science.gov (United States)

    Peterson, David; Jokisch, Derek; Fulmer, Philip

    2006-11-01

    A variety of consumer products and household items contain varying amounts of radioactivity. Examples of these items include: FiestaWare and similar glazed china, salt substitute, bananas, brazil nuts, lantern mantles, smoke detectors and depression glass. Many of these items contain natural sources of radioactivity such as Uranium, Thorium, Radium and Potassium. A few contain man-made sources like Americium. This presentation will detail the sources and relative radioactivity of these items (including demonstrations). Further, measurements of the isotopic ratios of Uranium-235 and Uranium-238 in several pieces of china will be compared to historical uses of natural and depleted Uranium. Finally, the presenters will discuss radiation safety as it pertains to the use of these items.

  2. Consumer Protection in Cyberspace

    Directory of Open Access Journals (Sweden)

    Oscar H. Gandy, Jr.

    2011-06-01

    Full Text Available This critical essay introduces the problem of discrimination enabled through the use of transaction-generated-information derived from the analysis of user behaviors within the network environment. The essay begins by describing how segments of the population that are already vulnerable become further victimized through the strategic use of discriminatory algorithms in support of identification, classification, segmentation, and targeting. In response, it evaluates a set of policy options that might be used to limit the harm and compensate the victims of these inherently dangerous technologies. Traditional approaches that stress the protection of privacy through restrictions on the collection and use of personal information are compared with alternatives based on individual and class actions under tort law, as well as more traditional regulatory approaches developed in the area of consumer products safety and environmental regulation.

  3. Supporting Better Treatments for Meeting Health Consumers' Needs: Extracting Semantics in Social Data for Representing a Consumer Health Ontology

    Science.gov (United States)

    Choi, Yunseon

    2016-01-01

    Introduction: The purpose of this paper is to provide a framework for building a consumer health ontology using social tags. This would assist health users when they are accessing health information and increase the number of documents relevant to their needs. Methods: In order to extract concepts from social tags, this study conducted an…

  4. Handbook of energy use for building construction

    Energy Technology Data Exchange (ETDEWEB)

    Stein, R.G.; Stein, C.; Buckley, M.; Green, M.

    1980-03-01

    The construction industry accounts for over 11.14% of the total energy consumed in the US annually. This represents the equivalent energy value of 1 1/4 billion barrels of oil. Within the construction industry, new building construction accounts for 5.19% of national annual energy consumption. The remaining 5.95% is distributed among new nonbuilding construction (highways, ralroads, dams, bridges, etc.), building maintenance construction, and nonbuilding maintenance construction. The handbook focuses on new building construction; however, some information for the other parts of the construction industry is also included. The handbook provides building designers with information to determine the energy required for buildings construction and evaluates the energy required for alternative materials, assemblies, and methods. The handbook is also applicable to large-scale planning and policy determination in that it provides the means to estimate the energy required to carry out major building programs.

  5. Handbook of energy use for building construction

    Science.gov (United States)

    Stein, R. G.; Stein, C.; Buckley, M.; Green, M.

    1980-03-01

    The construction industry accounts for over 11.14% of the total energy consumed in the US annually. This represents the equivalent energy value of 1 1/4 billion barrels of oil. Within the construction industry, new building construction accounts for 5.19% of national annual energy consumption. The remaining 5.95% is distributed among new nonbuilding construction (highways, railroads, dams, bridges, etc.), building maintenance construction, and nonbuilding maintenance construction. Emphasis is given to new building construction; however, some information for the other parts of the construction industry is also included. Building designers are provided with information to determine the energy required for buildings construction and to evaluate the energy required for alternative materials, assemblies, and methods. It is also applicable to large-scale planning and policy determination in that it provides the means to estimate the energy required to carry out major building programs.

  6. Model building

    International Nuclear Information System (INIS)

    Frampton, Paul H.

    1998-01-01

    In this talk I begin with some general discussion of model building in particle theory, emphasizing the need for motivation and testability. Three illustrative examples are then described. The first is the Left-Right model which provides an explanation for the chirality of quarks and leptons. The second is the 331-model which offers a first step to understanding the three generations of quarks and leptons. Third and last is the SU(15) model which can accommodate the light leptoquarks possibly seen at HERA

  7. Model building

    International Nuclear Information System (INIS)

    Frampton, P.H.

    1998-01-01

    In this talk I begin with some general discussion of model building in particle theory, emphasizing the need for motivation and testability. Three illustrative examples are then described. The first is the Left-Right model which provides an explanation for the chirality of quarks and leptons. The second is the 331-model which offers a first step to understanding the three generations of quarks and leptons. Third and last is the SU(15) model which can accommodate the light leptoquarks possibly seen at HERA. copyright 1998 American Institute of Physics

  8. Health care consumer reports: an evaluation of consumer perspectives.

    Science.gov (United States)

    Longo, Daniel R; Everet, Kevin D

    2003-01-01

    There has been a proliferation of health care consumer reports, also known as "consumer guides," "report cards," and "performance reports," which are designed to assist consumers in making more informed health care decisions. While there is evidence that providers use such reports to identify and make changes in practice, thus improving the quality of care, there is little empirical evidence on how consumer guides/report cards are used by consumers. This study fills that gap by surveying 925 patients as they wait for ambulatory care in several clinics in a midwestern city. Findings indicate that consumers are selective in their use of these reports and quickly identify those sections of the report of most interest to them. Report developers should take precautions to ensure such reports are viewed as credible sources of health care information.

  9. Energy in buildings: Efficiency, renewables and storage

    Science.gov (United States)

    Koebel, Matthias M.

    2017-07-01

    This lecture summary provides a short but comprehensive overview on the "energy and buildings" topic. Buildings account for roughly 40% of the global energy demands. Thus, an increased adoption of existing and upcoming materials and solutions for the building sector represents an enormous potential to reduce building related energy demands and greenhouse gas emissions. The central question is how the building envelope (insulation, fenestration, construction style, solar control) affects building energy demands. Compared to conventional insulation materials, superinsulation materials such as vacuum insulation panels and silica aerogel achieve the same thermal performance with significantly thinner insulation layers. With low-emissivity coatings and appropriate filler gasses, double and triple glazing reduce thermal losses by up to an order of magnitude compared to old single pane windows, while vacuum insulation and aerogel filled glazing could reduce these even further. Electrochromic and other switchable glazing solutions maximize solar gains during wintertime and minimize illumination demands whilst avoiding overheating in summer. Upon integration of renewable energy systems into the building energy supply, buildings can become both producers and consumers of energy. Combined with dynamic user behavior, temporal variations in the production of renewable energy require appropriate storage solutions, both thermal and electrical, and the integration of buildings into smart grids and energy district networks. The combination of these measures allows a reduction of the existing building stock by roughly a factor of three —a promising, but cost intensive way, to prepare our buildings for the energy turnaround.

  10. Price Intransparency, Consumer Decision Making and European Consumer Law

    OpenAIRE

    Boom, Willem

    2011-01-01

    textabstractPrice comparison is a basic element of competition. For comparison to work, at least prices need to be transparent. Moreover, price is usually a focal point in consumer thinking and deciding on transactions. Hence, obfuscating prices can be detrimental to consumers. Therefore, it is vital for policymakers to know how transparent pricing is in reality. Commercial practices involving price intransparency can be detrimental to consumer decision making and may be associated with marke...

  11. Ayurvedic research, wellness and consumer rights

    Directory of Open Access Journals (Sweden)

    Shailaja Chandra

    2016-03-01

    Full Text Available The growing interest in using Ayurvedic medicine as a gentler, safer option to using modern medicine drugs with attendant side effects continues to be thwarted because claims about effectiveness and safety are not backed with evidence and clinical data. The focus of Ayurveda practice and research should be on building bridges to this knowledge for public benefit. The consumer is being denied basic knowledge, access to product information as well as the benefit of a common prescription written by a single treating physician because of three factors – Ayurvedic OTC medicine is generally sold with names and labels which cannot be understood by the consumer despite being easily available without prescription; the treating modern medicine doctor is being prevented from writing the name of a herbal product even when he is individually convinced about its usefulness (in given circumstances and the absence of biomedical research using objective parameters proving the effectiveness of the drugs. Contemporary Ayurveda needs to be packaged to reach the modern consumer in a way that he gets the benefit of access to treatment options that assist healing within the ambit of the law. These obstacles have to be removed. Patient- based effectiveness studies using retrospective case material as well as research using interdisciplinary approaches are needed for public benefit. This has to be facilitated.

  12. The consumer dimension in new market mechanisms

    International Nuclear Information System (INIS)

    Ranchere, Anne-Soizic; Chamoy, Anne-Sophie; Scholtes, Emilie

    2014-01-01

    In a context of growing share of renewable energy sources and reduced electricity consumption, both long term and short term security of supply are under pressure. Gas fired power plants are facing reduced income from the energy market calling into question both the electricity market design and the electricity generation mix Integration of smart consumers (demand response) in the electricity System is a key element to address both questions. Due to market and System complexity, new market participants such as aggregators are contributing to building up and operating flexibility from consumers. Since 2009, Energy Pool has been actively contributing to the opening of new market mechanisms to value demand response. Energy Pool has developed services to support consumers in optimizing their flexibility. While today demand response value lies mainly in the balancing and reserve markets operated by the French transport System operator (RTE), new opportunities will emerge with the capacity market and the possibility to take advantage of the price signal by both increasing and reducing consumption. (authors)

  13. Bringing the DERP to consumers: 'Consumer Reports Best Buy Drugs'.

    Science.gov (United States)

    Findlay, Steven D

    2006-01-01

    Consumers Union, publisher of Consumer Reports magazine, has used the drug class reviews of the Drug Effectiveness Review Project (DERP) as one critical component of a free public information project on the comparative effectiveness, safety, and cost of prescription drugs. The project translates the DERP findings for consumers. Drawing on other sources and adding information on drug costs, the project chooses Best Buy drugs in each category it evaluates. This guidance can help consumers save up to thousands of dollars per year, and it has the potential to reduce overall drug spending.

  14. How may consumer policy empower consumers for sustainable lifestyles?

    DEFF Research Database (Denmark)

    Thøgersen, John

    2005-01-01

    Consumer policy can empower consumers for changing lifestyles by reducing personal constraints and limitations, but it should also attempt to loosen some of the external constraints that make changes towards a more sustainable lifestyle difficult. In terms of reducing consumers' subjectively felt...... restrictions on their ability to change lifestyle, the two approaches are equivalent. Policies that increase a feeling of empowerment may also have a positive effect on consumers' motivation to make an effort, thus amplifying its effects. In this paper both types of constraints on lifestyle changes...

  15. The Meaning of Happiness in Consumer Research: Results from an Inductive Exploratory Pilot Study

    DEFF Research Database (Denmark)

    Sørensen, Elin Brandi; Thomsen, Thyra Uth

    2016-01-01

    In this study we investigate the meaning of happiness in a consumption context. We employ an inductive approach and present the results of an exploratory pilot study with eight consumers. The study is based on a Multi-Sensory-Sculpting (MSS) procedure in which we asked consumers to build sculptures...... that represent consumer happiness. Following the MSS guidelines, consumers were interviewed about the meanings of their sculpture in order to elicit embodied cognition about the topic at hand. In this paper we present the meanings of consumer happiness in the participants‟ accounts and discuss implications...... for consumer research. Further, we discuss the applicability of the MSS-procedure to the topic of consumer happiness, and how to optimize it for later studies on consumer happiness....

  16. Branding the Self on Yelp: Consumer Reviewing as Image Entrepreneurship

    Directory of Open Access Journals (Sweden)

    Kathleen M. Kuehn

    2016-11-01

    Full Text Available This research offers a case study of how consumer reviewing on Yelp.com is conceived by users as a viable platform for constructing and promoting a self-brand. A thematic analysis of 18 in-depth interviews conducted with Yelp reviewers examines the various practices and relations involved in the self-branding process. Findings reveal that authenticity, feedback, and positive affect are of central importance to the task of “image entrepreneurship.” Although consumer reviewers commodify their own image to build a reputation for others, participants recognize consumer reviewing and self-branding as mutually constituted sites of productivity with recognizable market value. At the same time, Yelp’s commercial nature complicates the potential range of agency and empowerment experienced. As a tool for self-branding, consumer reviewing is evaluated as a mechanism of the post-Fordist social factory in which notions of work are dispersed into all spheres of life.

  17. Decision-Based Design Integrating Consumer Preferences into Engineering Design

    CERN Document Server

    Chen, Wei; Wassenaar, Henk Jan

    2013-01-01

    Building upon the fundamental principles of decision theory, Decision-Based Design: Integrating Consumer Preferences into Engineering Design presents an analytical approach to enterprise-driven Decision-Based Design (DBD) as a rigorous framework for decision making in engineering design.  Once the related fundamentals of decision theory, economic analysis, and econometrics modelling are established, the remaining chapters describe the entire process, the associated analytical techniques, and the design case studies for integrating consumer preference modeling into the enterprise-driven DBD framework. Methods for identifying key attributes, optimal design of human appraisal experiments, data collection, data analysis, and demand model estimation are presented and illustrated using engineering design case studies. The scope of the chapters also provides: •A rigorous framework of integrating the interests from both producer and consumers in engineering design, •Analytical techniques of consumer choice model...

  18. Consumer acceptance of irradiated food

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1998-12-31

    There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  19. Consumer acceptance of irradiated food

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P. [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1997-12-31

    There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  20. Do attitudes predict consumer's behavior?

    Directory of Open Access Journals (Sweden)

    Đelošević Ivana

    2017-01-01

    Full Text Available There are many themes in marketing to analyze the psychological and marketing aspect of research. The survey of consumer attitudes is one of them. The consumer attitudes have long been discussed and written about. For this purpose, numerous theories, models and researches have emerged. The research of powerful feelings of consumers towards products is something that marketers are constantly trying to achieve. Therefore it is very important for them to understand the factors affecting the attitudes of consumers. Issues related to consumers' attitudes have always been subject matter of the marketers who are trying to keep and maintain the positive and minimize negative attitudes towards the products and services of company. Bearing in the mind that attitudes play a central role in purchase decision, marketers are trying to explore the relation between attitudes and behavior of consumers.

  1. Consumer acceptance of irradiated food

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1997-01-01

    There was a widely held opinion during the 1970's and 1980's that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  2. Consumer protection in electronic commerce

    Directory of Open Access Journals (Sweden)

    Nicoleta Andreea NEACŞU

    2016-07-01

    Full Text Available Electronic commerce is one of the most important aspects of the Internet and allows people to buy instant. Fast and easy development of e-commerce has led to the necessity of consumer protection in cyberspace, where trade takes place, so as to ensure consumer safety and security matters. This article examines e-commerce in terms of consumer protection and data security, which concerns equally all stakeholders in the electronic market: buyers, sellers, banks, courier cargo and other participants.

  3. Consumer Online Grocery Buying Intention

    OpenAIRE

    Hansen, Torben; Jensen, Jan Møller; Solgaard, Hans Stubbe

    2003-01-01

    This paper tests the ability of two consumer theories - the theory of reasoned action and the theory of planned behavior - in predicting consumer online grocery buying intention. In addition, a comparison of the two theories is conducted. Data were collected from two web-based surveys of Danish (n=1222) and Swedish (n=1038) consumers using self-administered questionnaires. Lisrel results suggest that the theory of planned behavior (with the inclusion of a path from subjective norm to attitude...

  4. Cognitive style and consumer innovativeness

    OpenAIRE

    Foxall, Gordon R.; Haskins, Christopher

    1986-01-01

    The identification of consumer innovators offers marketing managers the opportunity to tailor new products to the buyers who initiate the diffusion of innovations. Progress has been made in identifying such consumers in economic and social terms, but there are advantages of cost and convenience in isolating the personality profiles of innovators, especially during prelaunch product testing. But innovative consumers' distinctive personality traits have proved elusive. This paper reports an inv...

  5. The feasibility of a Paleolithic diet for low-income consumers

    NARCIS (Netherlands)

    Metzgar, Matthew; Rideout, Todd C.; Fontes-Villalba, Maelan; Kuipers, Remko S.

    Many low-income consumers face a limited budget for food purchases. The United States Department of Agriculture developed the Thrifty Food Plan to address this problem of consuming a healthy diet given a budget constraint. This dietary optimization program uses common food choices to build a

  6. Consumer Products Containing Radioactive Materials

    Science.gov (United States)

    Fact Sheet Adopted: February 2010 Health Physics Society Specialists in Radiation Safety Consumer Products Containing Radioactive Materials Everything we encounter in our daily lives contains some radioactive material, ...

  7. Consumer viewpoints on food irradiation

    International Nuclear Information System (INIS)

    Fazal, A.

    1985-01-01

    The International Organization of Consumers Unions (IOCU), a non-profit, non-party political foundation that represents the interests of consumers worldwide. It consists of some 1,140 organizations in over 50 countries of the world in the North, South, East and West. IOCU also represents the interest of the consumers in the U N system and enjoys consultative status with many of its various organs and agencies. This paper also speaks from the additional perspective of a Third World person who active in consumer public affairs issues over the last two decades

  8. Consumer behavior and energy use

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A conference was convened to provide an overview of major empirical studies in the area of behavioral research related to energy consumption and conservation. Papers were presented in the areas of national and international perspectives of consumer energy behaviors, methodological issues in consumer behavior research, consumers and travel, energy conservation programs implemented by governments and electric utilities, household energy decision making, financial incentives and disincentives, energy information and its relation to product purchase decisions, solar energy and the consumer, and the impact of conservation programs. Separate abstracts have been prepared for 29 papers from this conference.

  9. The effect of personality traits on consumers' preferences for extra virgin olive oil

    OpenAIRE

    Yangui, Ahmed; Costa Font, Montserrat; Gil Roig, José María

    2016-01-01

    The aim of this paper is to investigate the role of psychological factors on building the consumer's behavioral decision process towards extra virgin olive oil, with special attention paid to the organic attribute. The paper hypothesises that differences in consumers' personality traits, such as food-related personality traits, purchasing habits and lifestyles, affect consumers' preferences for extra virgin olive oil. The methodological framework is based on the specification of an extended h...

  10. Consumer engagement and the development, evaluation and dissemination of evidence-based parenting programs

    OpenAIRE

    Sanders, Matthew R.; Kirby, James N.

    2011-01-01

    A consumer perspective can contribute much to enhancing the “ecological fit” of population level parenting interventions so they meet the needs of parents. This approach involves building relationships with consumer groups and soliciting consumer input into the relevance and acceptability of interventions, clarifying the enablers and barriers to engagement and involvement of parents, and clarifying variables that influence a parent’s program completion. The adoption of a more collaborative ap...

  11. Consumer Behavior: Developing Skills for Assertiveness. Consumer Education Training Module.

    Science.gov (United States)

    Thayer, Lou

    The goal of this inservice guide for teaching consumer education at the secondary and adult level is to help consumers become more assertive when buying goods and services. A major section in the guide defines assertiveness. The four basic components of assertive behavior are the ability to express emotions openly, the capacity to exercise one's…

  12. Consumer Information. NASFAA Task Force Report. Consumer Information

    Science.gov (United States)

    National Association of Student Financial Aid Administrators, 2014

    2014-01-01

    The National Association of Student Financial Aid and Administrators (NASFAA) Consumer Information Task Force was convened to conduct a thorough review of the current student consumer information requirements and propose ways to streamline both the content and delivery of those requirements. The proposals in the this report were produced for…

  13. Price Intransparency, Consumer Decision Making and European Consumer Law

    NARCIS (Netherlands)

    W.H. van Boom (Willem)

    2011-01-01

    textabstractPrice comparison is a basic element of competition. For comparison to work, at least prices need to be transparent. Moreover, price is usually a focal point in consumer thinking and deciding on transactions. Hence, obfuscating prices can be detrimental to consumers. Therefore, it is

  14. Characterization of commercial building appliances. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Patel, R.F.; Teagan, P.W.; Dieckmann, J.T.

    1993-08-01

    This study focuses on ``other`` end-uses category. The purpose of this study was to determine the relative importance of energy end-use functions other than HVAC and lighting for commercial buildings, and to identify general avenues and approaches for energy use reduction. Specific energy consuming technologies addressed include non-HVAC and lighting technologies in commercial buildings with significant energy use to warrant detailed analyses. The end-uses include office equipment, refrigeration, water heating, cooking, vending machines, water coolers, laundry equipment and electronics other than office equipment. The building types include offices, retail, restaurants, schools, hospitals, hotels/motels, grocery stores, and warehouses.

  15. Consumer participation in housing: reflecting on consumer preferences.

    Science.gov (United States)

    Browne, Graeme; Hemsley, Martin

    2010-12-01

    Historically, people living with mental illness have had limited chance to participate in mental health services other than as patients. Following on from a recent review focusing on consumer participation in mental health services, this paper looks at consumer participation in housing. Housing is a critical element in recovery from mental illness. Without suitable housing, people have little chance of maintaining other resources in their lives, such as supportive social relationships and meaningful activities. Consumer participation is not a common topic in the recent literature, despite the significant public policy push to promote it. The importance of appropriate housing to the recovery of people living with mental illness cannot be underestimated. Even well-meaning and well-resourced housing initiatives can fall short of meeting consumers' recovery goals when they do not incorporate the expressed needs of consumers. These expressed needs include keeping units small in size and employing drop-in support models.

  16. How may consumer policy empower consumers for sustainable lifestyles?

    DEFF Research Database (Denmark)

    Thøgersen, John

    At least judged by its outcome, it seems that consumers in the rich parts of the world make less of an effort at changing their lifestyle in a sustainable direction than is desired by society and than is in their own collective long-term interest. Part of the explanations is that individual......'s striving for sustainability. The relevant external conditions are an extremely diverse set of factors, perhaps their only commonality being that, unless making an organized effort, consumers can do nothing about them. Because external conditions influence all or many consumers, making them more...... facilitating for sustainable consumption can be much more effective than anything an individual consumer can do. Many of the external constraints facing consumers who want to adopt a more sustainable lifestyle are of a relative nature and their impact depends on the individual's resources. For instance...

  17. Brand Value Building in Online Social Lending Startups

    OpenAIRE

    Djamchid Assadi; Arvind Ashta

    2012-01-01

    Connectivity in the information age, the attendant move to co-creating experiences with consumers, transaction cost economics associated with search costs in the wake of information overload, all suggest that brand value requires not only informing and dialogue, but also enabling discussion between consumers and with consumer communities. This research studies the Web 2.0 tools to find out how they can be used to build up brand equity through informing, dialoguing and enabling discussion. Thi...

  18. Energy Consumption Forecasting for University Sector Buildings

    Directory of Open Access Journals (Sweden)

    Khuram Pervez Amber

    2017-10-01

    Full Text Available Reliable energy forecasting helps managers to prepare future budgets for their buildings. Therefore, a simple, easier, less time consuming and reliable forecasting model which could be used for different types of buildings is desired. In this paper, we have presented a forecasting model based on five years of real data sets for one dependent variable (the daily electricity consumption and six explanatory variables (ambient temperature, solar radiation, relative humidity, wind speed, weekday index and building type. A single mathematical equation for forecasting daily electricity usage of university buildings has been developed using the Multiple Regression (MR technique. Data of two such buildings, located at the Southwark Campus of London South Bank University in London, have been used for this study. The predicted test results of MR model are examined and judged against real electricity consumption data of both buildings for year 2011. The results demonstrate that out of six explanatory variables, three variables; surrounding temperature, weekday index and building type have significant influence on buildings energy consumption. The results of this model are associated with a Normalized Root Mean Square Error (NRMSE of 12% for the administrative building and 13% for the academic building. Finally, some limitations of this study have also been discussed.

  19. Toward buildings with a positive energy balance

    International Nuclear Information System (INIS)

    Visier, Jean-Christophe

    2008-01-01

    As the results of the recent 'Grenelle of the Environment', which assembled French officials and organizations for a wide-ranging discussion of ecological issues, enter into application, buildings should gradually switch from being the foremost consumers of energy to becoming producers of energy. The stakes, technically, economically and socially, are enormous

  20. City-based Carbon Budgets for Buildings

    DEFF Research Database (Denmark)

    Lütken, Søren; Wretlind, Per Harry

    The construction of buildings consumes about 50% of all materials produced globally measured by weight. Materials such as cement, ceramic tile and steel are among the most carbon intensive materials to manufacture, and come with a carbon footprint of their own. This is called embodied carbon...

  1. Rules of Engagement: Building Brand Relationships

    Directory of Open Access Journals (Sweden)

    Alex Friedman

    2017-02-01

    Full Text Available As new social and shopping channels are developed, brands must understand why consumers want them, and why they matter. Alex Friedman shares four cornerstones to building strong customer loyalty through engagement both on and off these new channels.

  2. Consumer and media viewpoint

    International Nuclear Information System (INIS)

    Heinz, S.

    1988-01-01

    The future of the nuclear community will not resemble the past. Suddenly gone are the years of blind public trust, cheers for building the bomb that ended a world war, and the unquestioned alliance of patriotism and Pu. Awakened by the radioactivity cloud from Chernobyl and recent revelations of major releases during Hanford's early years, the public is demanding to play a part in its own future in suddenly jam-packed hearings. After four decades, nuclear pioneers should consider that a technology fashioned largely in the vacuum of war-driven secrecy is now being judged--fairly or not--alongside the rather unforgiving measures of present-day politics, economics and morality. The spiral of distrust may continue without a semblance of the following remedies. (1) The press and the public need to become better educated in radiation basics to start making more informed decisions on multi-billion-dollar issues. (2) Because reasoned public discussions of anything nuclear is at an impasse, supporters and critics of nuclear activities should spend less time trying to discredit their opponents and more time trying to understand why they think as they do. (3) The radiation-protection community should welcome scrutiny for one simple reason: no other way exists to regain public trust and respect

  3. CONSUMER MOTIVATION AND CONCERN FACTORS FOR ONLINE SHOPPING IN TURKEY

    Directory of Open Access Journals (Sweden)

    Ceren Topaloğlu

    2012-01-01

    Full Text Available Understanding consumer behaviour in online environments is the basic factor to build an effective consumer-retailer relationship structure. The purpose of this study is to explore the influences of different values and concerns affecting search and purchase intentions of consumers and to build an integrated model, which could explain the purchase intentions of consumers in Turkey, where the majority of the population is under the age of 30. An integrated model of motivation and concern factors on the online shopping is developed to test the causal effect variables. Current study points out that hedonic value is a determinant of the consumer intention to search and purchase. Search intention has a direct impact on purchase intention. Utilitarian value does not have a significant impact on the search intention but it does have an important impact on the purchase intention. From the concern factors perspective, security has a significant impact on both search and purchase intentions, whereas there is no impact for privacy.

  4. Influencing the online consumer's behavior

    NARCIS (Netherlands)

    Constantinides, Efthymios

    2004-01-01

    Addresses one of the fundamental issues of e-marketing: how to attract and win over the consumer in the highly competitive Internet marketplace. Analyses the factors affecting the online consumer's behavior and examines how e-marketers can influence the outcome of the virtual interaction and buying

  5. Attention, motivation, and consumer judgement

    DEFF Research Database (Denmark)

    Orquin, Jacob Lund

    and what happens when they process it? The dissertation contains four papers which report nine different experiments. The first three papers are concerned with the question of what health information consumers process while the last paper explores the consequences of strategically exposing consumers...

  6. Transportation Consumer Education Curriculum Guide.

    Science.gov (United States)

    Finn, Peter; And Others

    Materials in this curriculum guide represent a selection of the major transportation consumer topics and ideas and are designed to set the stage for more intensive transportation consumer education curriculum development and teacher efforts. (Eleven manuals covering the four transportation topics of public transportation, transportation and the…

  7. Empirical analysis of consumer behavior

    NARCIS (Netherlands)

    Huang, Yufeng

    2015-01-01

    This thesis consists of three essays in quantitative marketing, focusing on structural empirical analysis of consumer behavior. In the first essay, he investigates the role of a consumer's skill of product usage, and its imperfect transferability across brands, in her product choice. It shows that

  8. Reactor building

    International Nuclear Information System (INIS)

    Maruyama, Toru; Murata, Ritsuko.

    1996-01-01

    In the present invention, a spent fuel storage pool of a BWR type reactor is formed at an upper portion and enlarged in the size to effectively utilize the space of the building. Namely, a reactor chamber enhouses reactor facilities including a reactor pressure vessel and a reactor container, and further, a spent fuel storage pool is formed thereabove. A second spent fuel storage pool is formed above the auxiliary reactor chamber at the periphery of the reactor chamber. The spent fuel storage pool and the second spent fuel storage pool are disposed in adjacent with each other. A wall between both of them is formed vertically movable. With such a constitution, the storage amount for spent fuels is increased thereby enabling to store the entire spent fuels generated during operation period of the plant. Further, since requirement of the storage for the spent fuels is increased stepwisely during periodical exchange operation, it can be used for other usage during the period when the enlarged portion is not used. (I.S.)

  9. Building America

    Energy Technology Data Exchange (ETDEWEB)

    Brad Oberg

    2010-12-31

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performance homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.

  10. Consumer perceptions of beef healthiness

    DEFF Research Database (Denmark)

    Van Wezemael, Lynn; Verbeke, Wim; Dutra de Barcellos, Marcia

    2010-01-01

    of beef consumed. Focus group participants were not in favour of improving beef healthiness during processing, but rather focussed on appropriate consumption behaviour and preparation methods. CONCLUSIONS: The individual responsibility for health implies that consumers should be able to make correct......BACKGROUND: Consumer perception of the healthiness of beef is an important determinant of beef consumption. However, little is known about how consumers perceive the healthiness of beef. The aim of this study is to shed light on the associations between beef and health. METHODS: Eight focus group...... as well as negative effects of beef consumption on their health. Labelled, branded, fresh and lean beef were perceived as signalling healthful beef, in contrast with further processed and packaged beef. Consumers felt that their individual choices could make a difference with respect to the healthiness...

  11. Food safety and consumer behaviour

    DEFF Research Database (Denmark)

    Frewer, Lynn; Fischer, Arnout; Scholderer, Joachim

    2005-01-01

    Food safety is a priority for many consumers, and there is an expectation throughout society that the food supplied for human consumption is safe and nutritious to eat. Understanding technical risk estimates alone, however, will not explain the risk-related behaviours of consumers. On the one hand......, consumers may not pay enough attention to some types of food safety issue, such as the risk of food poisoning from microbial contamination, which may at best be debilitating, and at worst fatal (Center for Disease Control and Prevention, 1994). This risk is certainly largely avoidable through taking...... appropriate risk mitigation measures through the food chain, not least in the domestic kitchen. However, factors related to consumer psychology may increase the risks to consumers as they produce barriers to self-protective behaviours (Frewer & Fischer, in press; Worsfold & Griffith, 1997). In contrast...

  12. Food safety and consumer behaviour

    DEFF Research Database (Denmark)

    Frewer, Lynn; Fischer, Arnout; Scholderer, Joachim

    2005-01-01

    , consumers may not pay enough attention to some types of food safety issue, such as the risk of food poisoning from microbial contamination, which may at best be debilitating, and at worst fatal (Center for Disease Control and Prevention, 1994). This risk is certainly largely avoidable through taking......Food safety is a priority for many consumers, and there is an expectation throughout society that the food supplied for human consumption is safe and nutritious to eat. Understanding technical risk estimates alone, however, will not explain the risk-related behaviours of consumers. On the one hand...... appropriate risk mitigation measures through the food chain, not least in the domestic kitchen. However, factors related to consumer psychology may increase the risks to consumers as they produce barriers to self-protective behaviours (Frewer & Fischer, in press; Worsfold & Griffith, 1997). In contrast...

  13. Profile of organic food consumers

    Directory of Open Access Journals (Sweden)

    Kranjac Mirjana

    2017-01-01

    Full Text Available The aim of this study is to prove that profile of organic food consumers is dependent on their socio-demographic characteristics as well as to shape universal organic food consumer profile. The survey included 398 consumers in Serbia. Results indicate existence of typical consumer's profile. The findings could be generalized proving that socio-demographic profiles in a larger population are strictly related to the decision to utilize organic food. The study finally contributes to the stakeholders in general, since the knowledge of the attributes can help all of them to play more active role in this supply chain. It should stimulate the personalized approach to the particular groups of consumers based on socio-demographic characteristics in order to intensify consumption of organic food and to create different marketing plans dependent on the particular countries or areas.

  14. Consumer demand and quality assurance

    DEFF Research Database (Denmark)

    Grunert, Klaus G; Wognum, Nel; Trienekens, Jacques

    2011-01-01

    Consumers differ in their demands, and this mau have implications for the type of supply chain governance that is most suitable for serving them. We present a segmentation of pork consumers in the EU based on their food-related lifestyles and demand for different pork products. We then present...... an inventory of pork chain governance and quality management systems, also resulting from a pan-European study, and attempt to match types of chains to consumer segments, arguing that the type of quality demanded by the consumers has implications especially for the quality management system governing the chain......, and that these implications are different for fresh meat and processed meat. The paper closes with a call for more collaboration between chain researchers and consumer researchers....

  15. European consumers and beef safety

    DEFF Research Database (Denmark)

    Van Wezemael, Lynn; Verbeke, Wim; Kügler, Jens Oliver

    2010-01-01

    European beef consumption has been gradually declining during the past decades, while consumers' concerns about beef safety have increased. This paper explores consumer perceptions of and interest in beef safety and beef safety information, and their role in beef safety assessment and the beef...... consumption decision making process. Eight focus group discussions were performed with a total of 65 beef consumers in four European countries. Content analysis revealed that European consumers experienced difficulties in the assessment of the safety of beef and beef products and adopted diverging uncertainty...... reduction strategies. These include the use of colour, labels, brands and indications of origin as cues signalling beef safety. In general, consumer trust in beef safety was relatively high, despite distrust in particular actors....

  16. Consumer protection in energy law

    International Nuclear Information System (INIS)

    De Krom, H.; Van Leeuwen, E.T.W.M.; Schaap, A.R.

    2009-01-01

    This article provides an overview of the protection that energy consumers are entitled to in the framework of the energy law. First we provide an overview of the parties operating in the energy market that consumers deal with directly or indirectly. Next the supply permit is addressed, which provides an important safeguard for consumers against unreliable suppliers. In part 4 we address the protection of the consumer prior to and while closing an agreement. Part 5 addresses the supplier's obligations. Part 6 discusses the judicial processes that are available to the consumer in case of (partial) non-observance of the agreement. We also pay attention to the compensation schemes and emergency supply in case a supplier is permanently unable to fulfill his obligations. Finally, we address the termination of the agreement. [nl

  17. The Role of Consumer's Identification in Consumer Behavior and Branding

    Directory of Open Access Journals (Sweden)

    Mana Razeghi

    2017-11-01

    Full Text Available The purpose of this paper is to investigate relationships between congruity of consumer and brand values, brand identification, brand commitment, and word of mouth. In order to test the relationships between variables 600 questionnaire were distributed in Dubai Malls (Sun and Sand Sports and 334 of questionnaires were received and analyzed. To verify the validity of the questionnaire and to test the significance of observer variables (questionnaire and latent variables (factors, confirmatory factor analysis was used, and Cronbach's alpha was employed to test the reliability. To evaluate the association between variables, the Pearson correlation test is used, and then to verify the conceptual model test the structural equation modeling (SEM and LISREL software are deployed. The result shows that Value congruity positively influences consumers' identification with a brand and Value congruity positively influences consumers ‘commitment to brand. The result also shows that Consumer identification has a positive influence on brand commitment and mediating variable between value congruity and brand commitment and Consumers commitment to a brand has a positive influence on positive WOM and mediating variable between consumers' identification and WOM. The results also demonstrate that Consumer identification positively influences positive WOM.

  18. The agile village: building well-being and wealth in an era of demand change

    Directory of Open Access Journals (Sweden)

    Faraz Pouyandeh

    2014-06-01

    Full Text Available During the past few years, there have been tremendous changes on customer preferences on the architectures and design perspectives. There are many cases where there are big differences between what originally a plan is designed for and what it comes in final stage. Obviously, this may create significant amount of rework, waste and it can increase the cost of building a house, significantly. This paper presents an empirical investigation on factors influencing change in architecture of buildings. The proposed study designs a questionnaire in Likert scale and distributes it among some experts at difference universities in Iran. The study categorizes different factors in terms of “factors reducing change in clients’ request”, “methods on predicting clients’ request”, “methods on presenting plans for clients”, “Effective parameters on change in plan” and finally “Important actions on change prevention”. Using experts’ insight, the study ranks various factors in each category.

  19. RESEARCH ON MOBILE CONSUMER HABIT AND ATTITUDE TOWARDS FEMTOCELL SERVICES

    Directory of Open Access Journals (Sweden)

    Novika Chandra Astuti

    2017-04-01

    Full Text Available Femtocell is the new technology that may offer competitive value to mobile service providers for increasing their market share, retain the consumers and lower the operational cost ini providing the better signal especially inside building (indoor. This study investigate the habit and attitude of mobile consumers int two specific areas in Bandung; Buah Batu Regency and Mitra Dago-Antapani, toward the use of femtocell value and services. This study also considers the marketing implication the success of femtocell deployment in the future

  20. Consumer-to-Consumer Electronic Commerce: A Distinct Research Stream

    OpenAIRE

    Kiku Jones; Lori N.K. Leonard

    2007-01-01

    Consumer-to-consumer (C2C) e-commerce is a growing area of e-commerce. However, according to a meta-analysis of critical themes of e-commerce, C2C e-commerce was only represented in the area of online auctions (Wareham, Zheng, & Straub, 2005). C2C e-commerce can encompass much more than just auctions. The question then becomes, “is C2C e-commerce a different research area that deserves its own stream of research?†This study adapts constructs from a business-to-consumer (B2C) e-commerce st...

  1. Building energy analysis tool

    Science.gov (United States)

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  2. Energy balance framework for Net Zero Energy buildings

    Science.gov (United States)

    Approaching a Net Zero Energy (NZE) building goal based on current definitions is flawed for two principal reasons - they only deal with energy quantities required for operations, and they do not establish a threshold, which ensures that buildings are optimized for reduced consum...

  3. Building trust

    International Nuclear Information System (INIS)

    Lewis, Meriel

    1995-01-01

    'Activate' is the energy magazine for secondary schools and is part of the Education Programme which is managed on behalf of the British Nuclear Industry Forum by AEA Technology. activate is the flagship communication device between the British Nuclear Industry Forum's Education Programme and secondary schools in the UK. It was developed from a previous publication, Nuclear Bulletin. There is a need for the nuclear industry to build trust with teachers and students in the UK, where for a long time, everything that the industry has said, written or printed has been disregarded by school teachers as propaganda. Over the last few years the industry has put in a great deal of effort to position itself as a provider of educationally sound and socially acceptable information. 'Activate' was an evolution of this idea and there was a hole in the market for a lively, activity and article based magazine that could be used in the classroom. The target audience is principally teachers of science, mathematics and geography, but also includes teachers of art,, English and history with students of between 11 and 18. The results were very positive in that teachers appreciated the colourful and lively nature of activate and they felt that it provided information and opinions in an un biased and non-propagandist way. Their comments about layout, number of activities style of presentation were taken into account and during the summer of 1994 activate was remodelled ready for re launch in September. The feedback so far is good with more teachers signing up every week to receive their own free copy

  4. Research Support Facility (RSF): Leadership in Building Performance (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-09-01

    This brochure/poster provides information on the features of the Research Support Facility including a detailed illustration of the facility with call outs of energy efficiency and renewable energy technologies. Imagine an office building so energy efficient that its occupants consume only the amount of energy generated by renewable power on the building site. The building, the Research Support Facility (RSF) occupied by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) employees, uses 50% less energy than if it were built to current commercial code and achieves the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED{reg_sign}) Platinum rating. With 19% of the primary energy in the U.S. consumed by commercial buildings, the RSF is changing the way commercial office buildings are designed and built.

  5. Consumer attitude toward food irradiation

    International Nuclear Information System (INIS)

    Bruhn, C.M.M.

    1986-01-01

    Consumer attitudes toward food irradiation were evaluated. The influence of educational efforts on consumer concern for the safety of irradiated products and willingness to buy irradiated foods were measured. Demographic and psychological factors were studied in relation to attitudes. An educational leaflet describing current scientific information regarding the safety, advantages, and disadvantages of food irradiation was developed and used in two studies evaluating attitude change. In the first study, attitude change among two groups of consumers with different philosophic orientations was measured. In a second study, the effectiveness of an educational leaflet received through the mail and a poster display were examined. In a third study response to food irradiation was related to value hierarchy, locus of control, innovativeness, and demographic parameters. Initially, subjects showed a higher concern for other areas of food safety, particularly the use of chemicals and sprays on food, than toward food irradiation. After educational efforts, conventional consumers expressed minor concern toward irradiation whereas ecologically sensitive alternative consumers obtained from a food cooperative expressed major concern. A knowledgeable discussion leader lowered irradiation concern among conventional consumers. In contrast, concern among alternative consumers did not diminish when given the opportunity to discuss safety issues with a knowledgeable person

  6. True or False: Consumer Perception to Green Consumer Retail

    Directory of Open Access Journals (Sweden)

    Sergio Silva Braga Junior

    2016-09-01

    Full Text Available The aim of this study was to analyze the influence of greenwshing in consumer awareness for green consumption in retail. Under this approach was evaluated if the greenwashing confuses consumers about what is to be green consumption and if it relies on green consumption. For the verification of the objective proposed by this work, an exploratory survey was conducted quantitative, through a survey with a sample of 359 respondents of São Paulo/Brazil. As for the justification of the method used, the exploratory research, with a non-probabilistic convenience sampling and quantitative nature, are characterized by a field approach seeking situational characteristics presented by respondents to generate quantitative measures of the attributes observed by them. For data collection was used a specialized company and market research and thus were collected data from real consumers. As a result it was observed that the greenwashing confuses consumed and does not influence the confidence of the green product.

  7. fundamental consumer rights under the consumer protection act 68

    African Journals Online (AJOL)

    Castle walk

    (g) a collective agreement in terms of Section 213 of the Labour Relations Act. 59 ..... "Direct marketing" means to approach a person, either in person or by ..... literacy skills and minimal experience as a consumer, to understand the contents.

  8. New build: Materials, techniques, skills and innovation

    International Nuclear Information System (INIS)

    Glass, Jacqueline; Dainty, Andrew R.J.; Gibb, Alistair G.F.

    2008-01-01

    The transition to secure, sustainable, low-energy systems will have a significant effect on the way in which we design and construct new buildings. In turn, the new buildings that are constructed will play a critical role in delivering the better performance that would be expected from such a transition. Buildings account for about half of UK carbon dioxide (CO 2 ) production. So it is urgent to ensure that energy is used efficiently in existing buildings and that new building stock is better able to cope with whatever the future holds. Most energy used in buildings goes towards heating, lighting and cooling, but a growing percentage is consumed by domestic appliances, computers and other electrical equipment. Actual energy consumption is the product of a number of factors, including individual behaviours and expectations, the energy efficiency of appliances and the building envelope. This review focuses on the third of these, the building itself, and its design and construction. It discusses the issues faced by the construction industry today, suggesting that major changes are needed relating to materials, techniques, skills and innovation. It moves on to consider future advances to 2050 and beyond, including developments in ICT, novel materials, skills and automation, servitisation (the trend for manufacturers to offer lifetime services rather than simple products), performance measurement and reporting, and resilience. We present a vision of the new build construction industry in 2050 and recommendations for policy makers, industry organisations and construction companies

  9. 1998 ACEEE summer study on energy efficiency in buildings: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    These proceedings are contained in the following 10 volumes: (1) Residential buildings--Technologies, design and performance analysis; (2) Residential buildings--Program design, implementation and evaluation; (3) Commercial buildings--Technologies, design and performance analysis; (4) Commercial buildings--Program design, implementation and evaluation; (5) International collaborations and global market issues; (6) Deregulation of the utility industry and role of energy services companies; (7) Market transformation; (8) Information technologies, consumer behavior, and non-energy benefits; (9) Sustainable development, climate change, energy planning, and policy; and (10) Building industry trends. Papers have been processed separately for inclusion on the data base.

  10. New transmission interconnection reduces consumer costs

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2008-09-15

    The Central American electric interconnection system (SIEPAC) project will involve the construction of a 1830 km 230 kV transmission system that will link Guatemala, El Salvador, Honduras, Costa Rica, Nicaragua, and Panama. The system is expected to alleviate the region's power shortages and reduce electricity costs for consumers. Costs for the SIEPAC project have been estimated at $370 million. The system will serve approximately 37 million customers, and will include 15 substations. The contract for building the electrical equipment has been awarded to Schweitzer Engineering Laboratories (SEL) who plan to manufacture components at a plant in Mexico. The equipment will include high speed line protection, automation, and control systems. Line current differential systems and satellite-synchronized clocks will also be used. The new transmission system is expected to be fully operational by 2009. 1 fig.

  11. Regression Tree-Based Methodology for Customizing Building Energy Benchmarks to Individual Commercial Buildings

    Science.gov (United States)

    Kaskhedikar, Apoorva Prakash

    According to the U.S. Energy Information Administration, commercial buildings represent about 40% of the United State's energy consumption of which office buildings consume a major portion. Gauging the extent to which an individual building consumes energy in excess of its peers is the first step in initiating energy efficiency improvement. Energy Benchmarking offers initial building energy performance assessment without rigorous evaluation. Energy benchmarking tools based on the Commercial Buildings Energy Consumption Survey (CBECS) database are investigated in this thesis. This study proposes a new benchmarking methodology based on decision trees, where a relationship between the energy use intensities (EUI) and building parameters (continuous and categorical) is developed for different building types. This methodology was applied to medium office and school building types contained in the CBECS database. The Random Forest technique was used to find the most influential parameters that impact building energy use intensities. Subsequently, correlations which were significant were identified between EUIs and CBECS variables. Other than floor area, some of the important variables were number of workers, location, number of PCs and main cooling equipment. The coefficient of variation was used to evaluate the effectiveness of the new model. The customization technique proposed in this thesis was compared with another benchmarking model that is widely used by building owners and designers namely, the ENERGY STAR's Portfolio Manager. This tool relies on the standard Linear Regression methods which is only able to handle continuous variables. The model proposed uses data mining technique and was found to perform slightly better than the Portfolio Manager. The broader impacts of the new benchmarking methodology proposed is that it allows for identifying important categorical variables, and then incorporating them in a local, as against a global, model framework for EUI

  12. Effects of Traditional Advertising and Social Messages on Brand-Building Metrics and Customer Acquisition

    NARCIS (Netherlands)

    De Vries, Lisette; Gensler, Sonja; Leeflang, Pieter

    This study examines the relative effectiveness of traditional advertising, impressions generated through firm-to-consumer (F2C) messages on Facebook, and the volume and valence of consumer-to-consumer (C2C) messages on Twitter and web forums for brand-building and customer acquisition efforts. The

  13. Consumer motivations for sustainable consumption:

    DEFF Research Database (Denmark)

    Rezvani, Zeinab; Jansson, Johan; Bengtsson, Maria

    2018-01-01

    Recent conceptual studies identify gain, normative and hedonic factors as three categories of motivations of consumer proenvironmental behavior. However, empirical understanding of how these motivations interact and affect proenvironmental behavior is limited. This study is based on a survey of car...... owners in Sweden (N = 573) and uses structural equation modeling to analyze the data. The empirical findings point to the importance of all three motivations (gain, normative and hedonic) in consumer electric vehicle adoption intentions. Furthermore, for consumers who perceive high social norms regarding...

  14. Design of resilient consumer products

    DEFF Research Database (Denmark)

    Haug, Anders

    2016-01-01

    Consumer product sustainability is a topic that has been of increasing interest to practice and academia in recent decades. In this context, a widely discussed means of achieving sustainability is to design more durable products, thereby reducing the need for the production of new products....... In particular, the emotional perspective on product durability has received attention in recent design literature, since consumer products are often replaced long before they become physically non-functioning. However, the literature does not provide a full account of the causes of product replacement...... for designers to design resilient consumer products and for researchers to engage in further studies....

  15. Consumer acceptance of functional foods

    DEFF Research Database (Denmark)

    Frewer, Lynn J.; Scholderer, Joachim; Lambert, Nigel

    2003-01-01

    In the past, it has been assumed that consumers would accept novel foods if there is a concrete and tangible consumer benefit associated with them, which implies that those functional foods would quickly be accepted. However, there is evidence that individuals are likely to differ in the extent...... to which they are likely to buy products with particular functional properties. Various cross-cultural and demographic differences in acceptance found in the literature are reviewed, as well as barriers to dietary change. In conclusion, it is argued that understanding consumer's risk perceptions...

  16. Marketing research of consumer perception

    Directory of Open Access Journals (Sweden)

    Rodić Jelena

    2011-01-01

    Full Text Available Perception involves the collection, processing and interpretation of information through sensory receptors and represents the reality of an individual. Collecting customer information is imperative for marketing, because consumers are in the focus of defining all its objectives, strategies and plans. The result of the perception depends on a number of factors and that is why people do not experience stimuli in the same way. A marketing research of consumer perceptions has been carried out in order to identify the habits and understand the behavior of consumers when choosing products with special emphasis on the influence of perception, stimuli from the environment and perceptions of risk in their decision. .

  17. Building integrated photovoltaics

    NARCIS (Netherlands)

    Ritzen, M.J.; Vroon, Z.A.E.P.; Geurts, C.P.W.; Reinders, Angèle; Verlinden, Pierre; Sark, Wilfried; Freundlich, Alexandre

    2017-01-01

    Photovoltaic (PV) installations can be realized in different situations and on different scales, such as at a building level. PV installations at the building level can either be added to the building envelope, which is called building added PV (BAPV), or they can be integrated into the building

  18. Leveraging organizational dynamics in buildings to change behavior

    Science.gov (United States)

    Hewitt, Elizabeth L.

    Buildings may be stationary, but they are not static; they are dynamic and active collectives of agents and actors, and play an important cultural and social role in shaping norms and influencing outcomes in the built environment. This research develops and applies a unique framework that conceptualizes the urban multifamily residential building as an organization, and seeks to use this lens to better understand the role of organizational characteristics in influencing energy efficiency in buildings. This work finds that an organizational analogy is a fruitful approach for understanding buildings, and that buildings in many ways can and do function successfully as organizations. In particular, eight organizational characteristics are explored here that extend well to buildings. These eight organizational characteristics are also explored more deeply to support an argument that some buildings have an organizational advantage that well positions them to undertake energy efficiency initiatives. One organizational characteristic -- the ownership type of the building -- is determined to be particularly important in driving energy outcomes in multifamily buildings in New York City. In particular, it was found that cooperative buildings in the New York City housing market consume less energy citywide than other types of multifamily properties, holding all else equal. Conversely, it was also found that rental buildings tend to consume more energy citywide. Subsequent qualitative case study work in a small Brooklyn cooperative building offers a deeper understanding of organizational decentralization and its role in driving decision-making and outcomes in the building. Additional comparative work in two rental properties -- one high-income and one low-income -- adds additional context and understanding to economic considerations such as the influence of income in overriding centralized efforts to operate the building efficiently. Ultimately, this research develops an analogy

  19. Local Type Checking for Linked Data Consumers

    Directory of Open Access Journals (Sweden)

    Gabriel Ciobanu

    2013-07-01

    Full Text Available The Web of Linked Data is the cumulation of over a decade of work by the Web standards community in their effort to make data more Web-like. We provide an introduction to the Web of Linked Data from the perspective of a Web developer that would like to build an application using Linked Data. We identify a weakness in the development stack as being a lack of domain specific scripting languages for designing background processes that consume Linked Data. To address this weakness, we design a scripting language with a simple but appropriate type system. In our proposed architecture some data is consumed from sources outside of the control of the system and some data is held locally. Stronger type assumptions can be made about the local data than external data, hence our type system mixes static and dynamic typing. Throughout, we relate our work to the W3C recommendations that drive Linked Data, so our syntax is accessible to Web developers.

  20. Selected characteristics of Slovak consumers purchasing behaviour

    Directory of Open Access Journals (Sweden)

    Ľudmila Nagyová

    2008-01-01

    Full Text Available Objective of the paper is to point out selected patterns of Slovak consumers based on analysis of buying behaviour. Results of presented survey of consumer buying patterns and preferences have poin­ted out key characteristics of buying behaviour of Slovak consumers. We’re able to confirm that new business companies as hypermarket and supermarket became main place for food shopping. Totally 72% of respondents indicated them as the type of store where they spend largest share of food ex­pen­ses. The self-service shop, traditional business units, is still the shopping place for 14% of res­pon­dents. The most important factors influencing selection of the type of store are closeness and location of the store, assortment and product quality, store personnel and price level. More than half of the respondents consider opening times the key service for choosing the place for shopping. 49.6% of respondents is using car to do shopping, 35.5% of respondents walk. 32.5% of respondents is using advertising leaflets to plan what to buy. 14.6% of respondents answered that even though receiving leaflets, they don’t read them. 31.3% of respondents are holders of loyalty cards. Most visited retail chain is Tesco.Currently building of large-scale business formats slowed down and retail chains try to get closer towards customer not only by reducing floor space but above all by locating the stores in the centre of cities with lower population.

  1. Risk assessment: 'A consumer's perspective'

    Energy Technology Data Exchange (ETDEWEB)

    Waterhouse, Rachel [Consumer' s Association, Health and Safety Commission (United Kingdom)

    1992-07-01

    The paper assesses the concept of risk, risk assessment and tolerability of risk from consumer point of view. Review of existing UK and EC directives on certain products and appliances is also covered.

  2. Consumer Education in Any Class

    Science.gov (United States)

    Wingo, Rosetta F.

    1977-01-01

    Examples are offered of how the classroom teacher can blend consumer education into typewriting, business English, business math, and other classes by intentionally focusing on principles and concepts or by including it incidentally when the opportunity arises. (TA)

  3. Consumer's inflation expectations in Brazil

    Directory of Open Access Journals (Sweden)

    Fernando Ormonde Teixeira

    Full Text Available Abstract This paper investigates what are the main components of consumer's inflation expectations. We combine the FGV's Consumer Survey with the indices of inflation (IPCA and government regulated prices, professional forecasts disclosed in the Focus report, and media data which we crawl from one of the biggest and most important Brazilian newspapers, Folha de São Paulo, to determine what factors are responsible for and improve consumer's forecast accuracy. We found gender, age and city of residence as major elements when analyzing micro-data. Aggregate data shows the past inflation as an important trigger in the formation of consumers' expectations and professional forecasts as negligible. Moreover, the media plays a significant role, accounting not only for the expectations' formation but for a better understanding of actual inflation as well.

  4. Risk assessment: 'A consumer's perspective'

    International Nuclear Information System (INIS)

    Waterhouse, Rachel

    1992-01-01

    The paper assesses the concept of risk, risk assessment and tolerability of risk from consumer point of view. Review of existing UK and EC directives on certain products and appliances is also covered

  5. Consumer food waste in Denmark

    DEFF Research Database (Denmark)

    Stancu, Violeta; Lähteenmäki, Liisa

    Linket til højre henviser til rapporten i trykt format til download. Dokumentet over linket er selve leveringen til ministeriet med følgebrev. Household food waste is one of the main contributors to the food waste amounts across the food supply chain. This report is based on a study conducted...... in September 2017 by MAPP Research Centre – Research on Value Creation in the Food Sector. The study aimed to examine consumer food waste, with a focus on consumer perceptions and practices related to food waste. A survey was completed by 508 respondents in Denmark to provide insights into self......-reported consumer food waste, consumer understanding and perceptions of food waste, household food-related practices as well as individual and household characteristics with a role in food waste....

  6. Utility shopping: are consumers ready?

    International Nuclear Information System (INIS)

    Barrados, A.

    1999-01-01

    This report provides an overview of public readiness to deal with deregulation of the electric power industry , based on an analysis of public reaction to the deregulation of the transportation, telecommunications and natural gas industries which already have taken place. The report also examines the reasons why residential consumers have reason to be wary of deregulation. These include the likelihood of slow development of the intended competition, the consequent limits on consumer choices, the possibility of increased prices, decreased quality of service and erosion of social values such as affordability and accessibility. The report concludes with a number of recommendations aimed at ensuring the existence of workable competition for residential consumers, that reliable and meaningful information is available as competition in deregulated markets gets underway, that independent sources of information are widely available, and that basic consumer protection against deceptive and borderline marketing practices, a regulatory oversight mechanism and public reporting mechanisms are in place before competition begins. 33 refs

  7. Building performance simulation for sustainable buildings

    NARCIS (Netherlands)

    Hensen, J.L.M.

    2010-01-01

    This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

  8. Influencing the online consumer's behavior

    OpenAIRE

    Constantinides, Efthymios

    2004-01-01

    Addresses one of the fundamental issues of e-marketing: how to attract and win over the consumer in the highly competitive Internet marketplace. Analyses the factors affecting the online consumer's behavior and examines how e-marketers can influence the outcome of the virtual interaction and buying process by focusing their marketing efforts on elements shaping the customer's virtual experience, the Web experience. Identifying the Web experience components and understanding their role as inpu...

  9. Consumer Behavior dan Marketing Mix

    OpenAIRE

    Pura A, Agus Hasan

    2005-01-01

    Marketing concept emerged since business philosophy shifted to a customer-centered, the job is to find the right products for your choosen target markets. The reason for customer orientation in which all functions work together to respond to, Serve, and satisfy customer. To satisfy consumer (end user) the marketing concept use integrated marketing, that is segmenting, Targeting, positioning, and marketing mix (4p/7p). And to.be success, marketer have to understand the behavior of consumers of...

  10. Tactile Stimulation and Consumer Response.

    OpenAIRE

    Hornik, Jacob

    1992-01-01

    Tactile behavior is a basic communication form as well as an expression of interpersonal involvement. This article presents three studies offering evidence for the positive role of casual interpersonal touch on consumer behavior. More specifically, it provides initial support for the view that tactile stimulation in various consumer behavior situations enhances the positive feeling for and evaluation of both the external stimuli and the touching source. Further, customers touched by a request...

  11. Consumer-based product profiling

    DEFF Research Database (Denmark)

    Giacalone, Davide; Ribeiro, Leticia Machado; Frøst, Michael Bom

    2013-01-01

    Napping® is an inexpensive and rapid method for sensory characterization, suitable for both trained and untrained subjects. In the study presented, the method was applied on 9 specialty beers. Subjects were 17 consumers without any training as sensory panelists, of whom 8 were beer experts and 9 ...... for sensory characterization, with the advantage of providing a product characterization based on consumer descriptions, thus better reflecting consumers’ experience with the product....

  12. Consumer Behaviour in Online Shopping

    OpenAIRE

    Hasslinger, Anders; Hodzic, Selma; Opazo, Claudio

    2008-01-01

    The Internet has developed into a new distribution channel and online transactions are rapidly increasing. This has created a need to understand how the consumer perceives online purchases. The purpose of this dissertation was to examine if there are any particular factors that influence the online consumer. Primary data was collected through a survey that was conducted on students at the University of Kristianstad. Price, Trust and Convenience were identified as important factors. Price was ...

  13. Motherhood, Marketization, and Consumer Vulnerability

    DEFF Research Database (Denmark)

    Davies, Andrea; Prothero, Andrea; Sørensen, Elin

    2010-01-01

    This article explores consumer vulnerability and the role of public policy by focusing on new mothers. Developing the consumer vulnerability model of Baker, Gentry, and Rittenburg, the authors consider how medical contexts, political and legal factors, economic resources, societal prescriptions...... a time of physical and psychological changes in mothers-to-be. This article illustrates that the extended market logic dominating contemporary mothering environments both contributes to and has the potential to exacerbate new mothers’ vulnerability, raising important challenges for public policy, both...

  14. Consumer oriented new product development

    DEFF Research Database (Denmark)

    van Trijp, Hans C.M.; Grunert, Klaus G

    2014-01-01

    New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

  15. Consumer perceptions of free will

    OpenAIRE

    Alba, Joseph W.; Vanhouche, Wouter; van Osselaer, Stijn

    2009-01-01

    The topic of free will has a long and distinguished history in philosophy and psychology. Consumer research has implicitly confronted the issue through empirical investigation of psychological processes that speak to the existence of free will; more recently, consumer psychologists have explicitly debated the question and its implications for decision making. The present research takes a different approach by investigating consumers’ perceptions of their free will. Our results suggest that...

  16. Body Image of Pakistani Consumers.

    OpenAIRE

    Tariq Jalees; Ernest C de Run

    2014-01-01

    This paper examines how media exposure, self-esteem, and religiosity influence body image of Pakistan consumers. The underpinning of this study is based on Social Comparison Theory with two additional variables (religiosity and self-esteem) for understanding understand consumer attitude towards body image. A self-administered questionnaire was used. 193 persons responded at mall intercepts. The Conceptual framework was empirically tested through SEM. A positive relationship between exposure t...

  17. Consumer acceptance of irradiated foods

    International Nuclear Information System (INIS)

    Feenstra, M.H.; Scholten, A.H.

    1991-01-01

    Although the first experiments on food irradiation were carried out in 1916 in Sweden, food irradiation, is for consumers, a relatively new technology. From the sixties food irradiation has been applied more and more, so that the consumer movement has become alert to this technology. Since then a lot of controversies have arisen in the literature about wholesomeness, safety, effects, etc. Food irradiation is currently permitted on a small scale in about 30 countries; in some countries or states food irradiation has been put under a ban (e.g. Australia, New Zealand, New Jersey). The World Health Organization (WHO) and the Food and Agriculture Organization of the United Nations (FAO) have, however, chosen food irradiation as a safe and sound method for preserving and improving the safety of food. Reactions on the part of the consumer organizations of many countries are however not in favour of or are even opposed to food irradiation. In this chapter consumer acceptance related to technological developments is described, then the convergence of the consumer movement on public opinion and concern on food irradiation is discussed. The need for labelling of irradiated food products is discussed and finally recommendations are given of ways to change consumers attitudes to food irradiation. (author)

  18. Tribal Green Building Toolkit

    Science.gov (United States)

    This Tribal Green Building Toolkit (Toolkit) is designed to help tribal officials, community members, planners, developers, and architects develop and adopt building codes to support green building practices. Anyone can use this toolkit!

  19. BUILDING 341 Seismic Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Halle, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-15

    The Seismic Evaluation of Building 341 located at Lawrence Livermore National Laboratory in Livermore, California has been completed. The subject building consists of a main building, Increment 1, and two smaller additions; Increments 2 and 3.

  20. Danish building typologies and building stock analyses

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Kragh, Jesper

    energy savings in residential buildings. The intension with this analysis was to investigate the possible energy reduction in Denmark if the same approach had been taken for the entire Danish building stock. The report concludes that the ZeroHome initiative clearly results in energy savings, but far from...... enough to meet the government’s plan to make Danish buildings free from use of fossil fuels by 2035. This will probably require around 50 % energy savings in the Danish building stock as a whole. However, the project has proven that dedicated engagement of locals can speed up market penetration...... for energy savings in the existing Building stock....

  1. Consumer energy conservation options - professional and consumer perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Ritchie, B.J.R.; Claxton, J.D.; McDougall, G.H.G.

    1980-01-01

    The objectives of this study were to: identify government policies for reducing Canadian consumption of home heating fuel, electricity, and gasoline; assess probable effectiveness of different policy alternatives as a means of reducing consumer energy consumption; and measure the acceptability to Canadian consumers of the different policy alternatives. Interviews were conducted with energy conservation professionals to identify and evaluate existing energy conservation programs, and interviews were conducted with consumers who had evaluated selected programs previously reviewed by the professionals. Information was also gathered on energy conservation activities of consumers surveyed. A directory of 34 energy conservation programs was also compiled. Some of the conclusions reached in this report are as follows. There is a need for an information system to gather data on existing conservation programs in order to increase the knowledge of relevant parties as to the outcomes of operating programs. This would help evaluation and improvement of current programs and suggest new program possibilities. The professionals rated six of the 34 programs highly, including the Energuide and the Canadian Home Insulation Program (CHIP). Retrofitting programs for houses are recommended for continuation and expansion, with some consideration given to linking these kinds of programs with home audit programs. In the private transport sector, any new conservation programs should be thoroughly tested on a small scale before widespread implementation, as evidence indicates that certain programs favorably evaluated by professionals may not be received favorably by consumers. 3 refs., 24 tabs.

  2. Consumer attitudes and olive oil acceptance: The potential consumer

    Directory of Open Access Journals (Sweden)

    McEwan, Jean A.

    1994-04-01

    Full Text Available       This paper outlines the results of consumer research to investigate consumer attitudes towards olive oil, and to evaluate selected experimental samples for acceptability.
          Consumer focus group discussions were used to investigate consumer attitudes to and awareness of olive oil, in relation to other culinary oils. A wide range of information was obtained, indicating the increasing importance of olive oil in the UK.
           Product use was examined to investigate the different types of olive oils consumers use, and the importance of different attributes for purchase. Price, quality and colour were the most important considerations for purchasing an olive oil, whilst package design, package material and brand were the least important.       Eight samples of virgin olive oil were evaluated for acceptability of appearance, odour, flavour and mouthfeel. These data indicated clear differences in acceptability between the samples, particularly on flavour, mouthfeel and overall acceptability. These data were then linked to sensory information to determine the characteristics of oil associated with liking for the product.

  3. Instigating involvement through consumer-based brand equity : an attitudinal study of consumer-based brand equity and consumer involvement

    OpenAIRE

    Bredberg, David; Holmquist, Johan

    2009-01-01

    Recent research on links between dimensions of consumer-based brand equity, as well as links to consumer involvement, has shown that it is a significant predictor of purchase behavior. The purpose of this dissertation is to explore the affect brands have on consumer involvement. We attempt to investigate how consumer-based brand equity affects the level of consumer involvement. Based on consumer behavior theory and previous research of these areas, gathered primary data (an empirical investig...

  4. Danish building typologies

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Kragh, Jesper

    The objective of TABULA is to develop a harmonised building typology for European countries. Each national building typology will consist of a set of residential model buildings with characteristic energy-related properties (element areas of the thermal building envelope, U-values, supply system...... efficiencies). The model buildings will each represent a specific construction period of the country in question and a specific building size. Furthermore the number of buildings, flats and the overall floor areas will be given, which are represented by the different building types of the national typologies....

  5. 27 CFR 555.222 - Table of distances between fireworks process buildings and between fireworks process and...

    Science.gov (United States)

    2010-04-01

    ... fireworks process buildings and between fireworks process and fireworks nonprocess buildings. 555.222... between fireworks process buildings and between fireworks process and fireworks nonprocess buildings. Net weight of fireworks 1 (pounds) Display fireworks 2 (feet) Consumer fireworks 3 (feet) 0-100 57 37 101-200...

  6. Website quality indicators for consumers.

    Science.gov (United States)

    Griffiths, Kathleen M; Christensen, Helen

    2005-11-15

    The rating tool DISCERN was designed for use by consumers without content expertise to evaluate the quality of health information. There is some evidence that DISCERN may be a valid indicator of evidence-based website quality when applied by health professionals. However, it is not known if the tool is a valid measure of evidence-based quality when used by consumers. Since it is a lengthy instrument requiring training in its use, DISCERN may prove impractical for use by the typical consumer. It is therefore important to explore the validity of other simpler potential indicators of site quality such as Google PageRank. This study aimed to determine (1) whether the instrument DISCERN is a valid indicator of evidence-based Web content quality for consumers without specific mental health training, and (2) whether Google PageRank is an indicator of website content quality as measured by an evidence-based gold standard. This was a cross-sectional survey of depression websites using consumer and health professional raters. The main outcome measures were (1) site characteristics, (2) evidence-based quality of content as measured by evidence-based depression guidelines, (3) DISCERN scores, (4) Google PageRank, and (5) user satisfaction. There was a significant association between evidence-based quality ratings and average DISCERN ratings both for consumers (r = 0.62, P = .001) and health professionals (r = 0.80, P PageRank (r = 0.59, P = .002). However, the correlation between DISCERN scores and user satisfaction was higher than the correlation between Google PageRank and user satisfaction. DISCERN has potential as an indicator of content quality when used either by experts or by consumers. Google PageRank shows some promise as an automatic indicator of quality.

  7. USSR Report: Consumer Goods and Domestic Trade

    National Research Council Canada - National Science Library

    1985-01-01

    .... This document contains articles on consumer goods and domestic trade within the USSR. Topics include: consumer goods production and distribution, housing and personal services, and consumer sector policy and economics.

  8. Marketing biofortified crops: insights from consumer research ...

    African Journals Online (AJOL)

    Marketing biofortified crops: insights from consumer research. ... To develop a global strategy for consumer marketing of biofortified crops, research is needed to understand consumer ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  9. 77 FR 69735 - Consumer Leasing (Regulation M)

    Science.gov (United States)

    2012-11-21

    ... Part 213 Advertising, Consumer leasing, Consumer protection, Federal Reserve System, Reporting and recordkeeping requirements. 12 CFR Part 1013 Advertising, Consumer leasing, Reporting and recordkeeping... contains regulatory documents #0;having general applicability and legal effect, most of which are keyed #0...

  10. Consumer engagement in social networks brand community

    OpenAIRE

    Rybakovas, Paulius

    2016-01-01

    Consumers increasingly integrate social media into their day-to-day lives. For companies consumer engagement in a brand community on social network is becoming increasingly important for developing relations with consumers. Consumer engagement in a brand community on social network creates a dynamic relationship between the community members and the brand which contributes to an increase in consumer loyalty to the brand. The literature is abundant of studies, which examines the consumer engag...

  11. Behavioral Targeting—Consumer Tracking

    Science.gov (United States)

    Srimani, P. K.; Srinivas, A.

    2011-12-01

    Behavioral targeting is an online marketing method that collects data on the browsing activities of consumers, in order to `target' more relevant online advertising. Behavioral targeting enables marketers to reach in-market consumers and increases the value of publisher inventory. At the heart of behavioral targeting is a learning-based investigation of consumer behaviors. It helps marketers understand consumers' purchase patterns over time, mapping out a customer's activities based not only on a single purchase but also on an annual or even lifetime basis. As marketers increasingly appreciate the importance of customer lifetime value, behavioral targeting can be a foundation for creating a continuous analytical study of consumer trends and patterns. But as behavioural-targeting systems become more sophisticated and invasive, it is vital that the companies behind them are open with users about what is going on, and give them control over their personal information. The aim of this paper is to explore the various tools and techniques of behavioral targeting and its benefits to online marketing. A multiple—case study approach was used for exploring the effectiveness and acceptance of online marketing in the area of the online marketing.

  12. Food irradiation and the consumer

    International Nuclear Information System (INIS)

    Thomas, P.A.

    1990-01-01

    The poster presents a review of research work undertaken on the perception and understanding that consumers have of food irradiation. Food irradiation is not a revolutionary new food processing technique, in fact it is probably one of the most investigated methods presently available. Many countries such as Belgium, France, Denmark, Italy, Spain, the Netherlands and the United States of America permit food irradiation. In Britain it is presently banned although this is currently under review. Awareness of food irradiation by the general public in Britain, although not extensively researched would appear to be increasing, especially in the light of recent media coverage. New quantitative and qualitative work indicates that the general public are concerned about the safety and effectiveness of food irradiation. Research has shown that a large proportion of consumers in Britain, if given the opportunity to purchase irradiated food, would not do so. Further exploration into this response revealed the fact that consumers are confused over what food irradiation is. In addition, there is concern over the detection of irradiated food. The views presented in this paper, of the consumer reaction to irradiated food are of great importance to those involved in the food industry and industries allied to it, which are ultimately dependent on the consumer for their commercial survival. (author)

  13. Reducing the operational energy demand in buildings using building information modeling tools and sustainability approaches

    Directory of Open Access Journals (Sweden)

    Mojtaba Valinejad Shoubi

    2015-03-01

    Full Text Available A sustainable building is constructed of materials that could decrease environmental impacts, such as energy usage, during the lifecycle of the building. Building Information Modeling (BIM has been identified as an effective tool for building performance analysis virtually in the design stage. The main aims of this study were to assess various combinations of materials using BIM and identify alternative, sustainable solutions to reduce operational energy consumption. The amount of energy consumed by a double story bungalow house in Johor, Malaysia, and assessments of alternative material configurations to determine the best energy performance were evaluated by using Revit Architecture 2012 and Autodesk Ecotect Analysis software to show which of the materials helped in reducing the operational energy use of the building to the greatest extent throughout its annual life cycle. At the end, some alternative, sustainable designs in terms of energy savings have been suggested.

  14. Secondary School Student's Attitude towards Consumer

    African Journals Online (AJOL)

    FIRST LADY

    Keywords: Consumer Education, Attitude, Home Economics, Secondary. School Students. ... Home Management taught at Senior Secondary School level. Today ..... indicate that facilities for teaching Consumer Education especially textbooks.

  15. A hybrid energy efficient building ventilation system

    International Nuclear Information System (INIS)

    Calay, Rajnish Kaur; Wang, Wen Chung

    2013-01-01

    The present paper presents a high performance cooling/heating ventilation system using a rotary heat exchanger (RHE), together with a reverse-cycle heat pump (RCHP) that can be integrated with various heat sources. Energy consumption in the building sector is largely dominated by the energy consumed in maintaining comfortable conditions indoors. For example in many developed countries the building heating, ventilation and air conditioning (HVAC) systems consume up to 50% of the total energy consumed in buildings. Therefore energy efficient HVAC solutions in buildings are critical for realising CO 2 targets at local and global level. There are many heating/cooling concepts that rely upon renewable energy sources and/or use natural low temperature heat sources in the winter and heat sinks in the summer. In the proposed system, waste energy from the exhaust air stream is used to precondition the outdoor air before it is supplied into the building. The hybrid system provides heating in the winter and cooling in the summer without any need for additional heating or cooling devices as required in conventional systems. Its performance is better than a typical reheat or air conditioning system in providing the same indoor air quality (IAQ) levels. It is shown that an energy saving up to 60% (heat energy) is achieved by using the proposed hybrid system in building ventilation applications. -- Highlights: • Hybrid ventilation system: the hybrid ventilation system uses a rotating regenerator and a reversible heat pump. • Heat recovery: heat recovery from exhaust air stream by rotary wheel type heat exchanger. • Reversible cycle heat pump (RCHP): additional heating or cooling of the supply air is provided by the RCHP. • Energy efficiency: energy savings of up to 60% using the proposed system are achievable

  16. Consumer response to packaging design: The role of packaging materials and graphics in sustainability perceptions and product evaluations

    NARCIS (Netherlands)

    Steenis, N.D.; Herpen, E. van; Lans, I.A. van der; Ligthart, T.N.; Trijp, H.C.M. van

    2017-01-01

    Building on theories of cue utilization, this paper investigates whether and how packaging sustainability influences consumer perceptions, inferences and attitudes towards packaged products. A framework is tested in an empirical study among 249 students using soup products varying in packaging

  17. Segmentation: Identification of consumer segments

    DEFF Research Database (Denmark)

    Høg, Esben

    2005-01-01

    It is very common to categorise people, especially in the advertising business. Also traditional marketing theory has taken in consumer segments as a favorite topic. Segmentation is closely related to the broader concept of classification. From a historical point of view, classification has its...... origin in other sciences as for example biology, anthropology etc. From an economic point of view, it is called segmentation when specific scientific techniques are used to classify consumers to different characteristic groupings. What is the purpose of segmentation? For example, to be able to obtain...... a basic understanding of grouping people. Advertising agencies may use segmentation totarget advertisements, while food companies may usesegmentation to develop products to various groups of consumers. MAPP has for example investigated the positioning of fish in relation to other food products...

  18. Modern frame structure buildings

    Directory of Open Access Journals (Sweden)

    В. М. Першаков

    2013-07-01

    Full Text Available The article deals with the design, construction and implementation of reinforced concrete frame structures with span 18, 21 m for agricultural production buildings, hall-premises of public buildings and buildings of agricultural aviation. Structures are prefabricated frame buildings and have such advantages as large space inside the structure and lower cost compared with other facilities with same purpose

  19. Retrofitting Listed Buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2011-01-01

    The paper presents a case study where the energy demand for a listed building constructed in 1900 is reduced. Many older buildings are listed and have restrictions that include the entire building or that include only its exterior. For the building presented, only its exterior facade is listed. T...

  20. Measurement in Sustainable Building

    DEFF Research Database (Denmark)

    Hale, Lara

    2018-01-01

    Measurement is a necessary aspect of planning and constructing buildings. However, recent attempts to integrate the social dimension of sustainable building into building design and specifications demand measurement of non-technical qualities, such as well-being. The Active House Alliance, in lieu...... and continued provision of sustainable buildings to market demand....

  1. The Consumer Reports Effectiveness Score: What Did Consumers Report?

    Science.gov (United States)

    Nielsen, Stevan Lars; Smart, David W.; Isakson, Richard L.; Worthen, Vaughn E.; Gregersen, Ann T.; Lambert, Michael J.

    2004-01-01

    From readers' ratings of satisfaction, problem resolution, and perceived emotional change during treatment, Consumer Reports magazine (CR, 1995) concluded both that psychotherapy is effective and that longer, more intensive therapy is more effective. The authors compared prospectively gathered 45-Item Outcome Questionnaire scores (OQ-45; M. J.…

  2. Consumer acceptance of irradiated poultry

    International Nuclear Information System (INIS)

    Hashim, I.B.; Resurreccion, A.V.A.; McWatters, K.H.

    1995-01-01

    A simulated supermarket setting (SSS) test was conducted to determine whether consumers (n = 126) would purchase irradiated poultry products, and the effects of marketing strategies on consumer purchase of irradiated poultry products. Consumer preference for irradiated poultry was likewise determined using a home-use test. A slide program was the most effective educational strategy in changing consumers' purchase behavior. The number of participants who purchased irradiated boneless, skinless breasts and irradiated thighs after the educational program increased significantly from 59.5 and 61.9% to 83.3 and 85.7% for the breasts and thighs, respectively. Using a label or poster did not increase the number of participants who bought irradiated poultry products. About 84% of the participants consider it either 'somewhat necessary' or 'very necessary' to irradiate raw chicken and would like all chicken that was served in restaurants or fast food places to be irradiated. Fifty-eight percent of the participants would always buy irradiated chicken if available, and an additional 27% would buy it sometimes. About 44% of the participants were willing to pay the same price for irradiated chicken as for nonirradiated. About 42% of participants were willing to pay 5% or more than what they were currently paying for nonirradiated chicken. Seventy-three percent or more of consumers who participated in the home-use test (n = 74) gave the color, appearance, and aroma of the raw poultry products a minimum rating of 7 (= like moderately). After consumers participated in a home-use test, 84 and 88% selected irradiated thighs and breasts, respectively, over nonirradiated in a second SSS test

  3. Consumer acceptance of irradiated poultry.

    Science.gov (United States)

    Hashim, I B; Resurreccion, A V; McWatters, K H

    1995-08-01

    A simulated supermarket setting (SSS) test was conducted to determine whether consumers (n = 126) would purchase irradiated poultry products, and the effects of marketing strategies on consumer purchase of irradiated poultry products. Consumer preference for irradiated poultry was likewise determined using a home-use test. A slide program was the most effective educational strategy in changing consumers' purchase behavior. The number of participants who purchased irradiated boneless, skinless breasts and irradiated thighs after the educational program increased significantly from 59.5 and 61.9% to 83.3 and 85.7% for the breasts and thighs, respectively. Using a label or poster did not increase the number of participants who bought irradiated poultry products. About 84% of the participants consider it either "somewhat necessary" or "very necessary" to irradiate raw chicken and would like all chicken that was served in restaurants or fast food places to be irradiated. Fifty-eight percent of the participants would always buy irradiated chicken if available, and an additional 27% would buy it sometimes. About 44% of the participants were willing to pay the same price for irradiated chicken as for nonirradiated. About 42% of participants were willing to pay 5% or more than what they were currently paying for nonirradiated chicken. Seventy-three percent or more of consumers who participated in the home-use test (n = 74) gave the color, appearance, and aroma of the raw poultry products a minimum rating of 7 (= like moderately). After consumers participated in a home-use test, 84 and 88% selected irradiated thighs and breasts, respectively, over nonirradiated in a second SSS test.

  4. SOCIAL MEDIA – VITAL INSTRUMENT IN GAINING CONSUMERS CONFIDENCE

    Directory of Open Access Journals (Sweden)

    Mirela-Cristina VOICU

    2016-06-01

    Full Text Available Given that, currently, the consumer has become more demanding and organizations face some of the greatest challenges due to the economic climate of recent years, the need to build and cultivate strong relationships has become vital not only for the company's success but also for its survival. And solid relationships are built over time through confidence. Trust is one of the most important elements in the process of purchasing and consumer loyalty; it is difficult to obtain but easy to lose. Companies that are enjoying a high degree of confidence benefit from best quotations for their shares, higher profits and a better retention of the best employees. The effects of the lack of confidence are obvious (unsatisfied consumers, lost sales and very expensive for the company. In this context, through the following paper we seek to bring more understanding on how a company can gain the confidence of consumers given that the forms of communication that consumers prefer and that are gaining momentum currently, are taking place online, especially in the social media.

  5. Optimal bidding strategies for competitive generators and large consumers

    International Nuclear Information System (INIS)

    Fushuan Wen; David, A.K.

    2001-01-01

    There exists the potential for gaming such as strategic bidding by participants (power suppliers and large consumers) in a deregulated power market, which is more an oligopoly than a laissez-faire market. Each participant can increase his or her own profit through strategic bidding but this has a negative effect on maximising social welfare. A method to build bidding strategies for both power suppliers and large consumers in a poolco-type electricity market is presented in this paper. It is assumed that each supplier/large consumer bids a linear supply/demand function, and the system is dispatched to maximise social welfare. Each supplier/large consumer chooses the coefficients in the linear supply/demand function to maximise benefits, subject to expectations about how rival participants will bid. The problem is formulated as a stochastic optimisation problem, and solved by a Monte Carlo approach. A numerical example with six suppliers and two large consumers serves to illustrate the essential features of the method. (author)

  6. Consumer motivation towards purchasing fruit from integrated production in Belgium.

    Science.gov (United States)

    Vannoppen, J; Verbeke, W; Van Huylenbroeck, G

    2001-01-01

    Consumer concerns about food safety have been steadily growing during the last decade. Along with the recognition of the increasing power from the consumer side of food chains, this has forced agricultural producers to innovate and adapt their production methods. One of those developments is integrated production of pip fruit (IFP). This research analyses and presents motivational structures of consumers towards purchasing IP fruit in Belgium. The research methodology builds on means-end-chain (MEC) theory, with data collected through personal laddering interviews with consumers. A hierarchical value map, indicating motivational structures for farm shop purchase of IP-labelled apples, is presented. IP-apple buyers pursue typical values, with health being paramount. The findings reveal interactions between market channel characteristics and product attributes, including characteristics that refer to production methods. Also, the study shows how outlet choice influences the perception and the motivation structure of the respondents for the specific product, fresh fruit in this case. From the findings, two sets of implications are set forth. First, marketing implications pertaining to advertising through the application of the "Means-End Conceptualization of the Components of Advertising Strategy" or MECCAS model. Second, implications to producers with respect to adapting their production methods to the needs and wants of the present end consumers.

  7. ICT Enhanced Buildings Potentials

    DEFF Research Database (Denmark)

    Christiansson, Per

    2007-01-01

    component systems that are accessed and integrated in the real world of building use in different contexts. The ICT systems may be physically or virtually embedded in the building. Already in 1982 AT&T established the 'intelligent buildings', IB, concept due to marketing reasons and the Informart building...... with focus on virtual building models support, new services and user environment definitions and development, virtual spaces and augmented reality, intelligent building components, application ontologies, and ICT systems integration to illustrate ICT enhanced buildings potentials and R&D needs.  ...

  8. Global building physics

    DEFF Research Database (Denmark)

    Rode, Carsten

    2013-01-01

    High ambitions are set for the building physics performance of buildings today. No single technology can achieve fulfilment of these ambitions alone. Integrated, multi-facetted solutions and optimization are necessary. A holistic, or ‘global’, technological perspective is needed, which includes all...... aspects of the building as defined in building engineering. We live in an international society and building solutions are developed across country borders. Building physics is a global theme. The International Association of Building Physics has global appeal. This brief article reports the keynote...

  9. Global Building Physics

    DEFF Research Database (Denmark)

    Rode, Carsten

    2012-01-01

    High ambitions are set for the building physics performance of buildings today. No single technology can achieve fulfilment of these ambitions alone. Integrated, multi-facetted solutions and optimization are necessary. A holistic, or “global”, technological perspective is needed, which includes all...... aspects of the building as defined in building engineering. We live in an international society and building solutions are developed across country borders. Building physics is a global theme. The International Association of Building Physics has global appeal. The keynote lecture and this brief paper...

  10. Preferences of cut flowers consumers

    Directory of Open Access Journals (Sweden)

    Sylwia Kierczyńska

    2010-01-01

    Full Text Available The results of interviews suggest that majority of the cut flowers’ consumers has favourite kind of flower, among which most frequently pointed one was the rose. More than half of the interviewed favour the uniform colour of cut flowers and red colour was the most favourite one. The subtle smell of flowers was the most preferable one but the intensive fragrance was favoured for more consumers than odourless flowers. The data from selected florists’ confirm the information from interviews – in spite of the occasion, roses were the most demanded cut flowers.

  11. Approval of radioactive consumer goods

    International Nuclear Information System (INIS)

    Paynter, R.A.

    1992-01-01

    The 1980 Euratom Directive obliges the UK to draw up a system of prior authorization for the use of radioactive substances in a range of consumer products, and the Government intends to make regulations to fulfil the requirements of the Directive. These regulations will empower NRPB to approve such products prior to their supply to the public. In this brief article, the NRPB reviews the criteria against which to consider any proposed use of radioactive substances, considers radiological production standards for products and discusses the questions of the labelling of radioactive consumer goods. (UK)

  12. Consumer versus expert hazard identification

    DEFF Research Database (Denmark)

    Hagemann, Kit S.; Scholderer, Joachim

    2007-01-01

    Novel foods have been the object of intense public debate in recent years. Despite efforts to communicate the outcomes of risk assessments to consumers, public confidence in the management of potential risks has been low. Various reasons behind this have been identified, chiefly a disagreement...... between technical experts and consumers over the nature of the hazards on which risk assessments should focus, and perceptions of insufficient openness about uncertainties in risk assessment. Whilst previous research has almost exclusively focused on genetically modified foods, the present paper...

  13. Recreating Intimacy With Connected Consumers

    Directory of Open Access Journals (Sweden)

    Stephen Andrew

    2017-11-01

    Full Text Available In the good old times shop manager knew their customers personally and were able to tailor offerings to their needs and desires. But how can we create meaningful moments for connected consumers in global markets? Yasmeen Ahmad explains how in digital times data fill in. Smart algorithms help generate insights and enable real time action to provide the right product and service to the right customer at the right time. Companies that don’t want to be left behind a digital elite need to remain close to their customers across multiple digital touchpoints. Being capable of reading, interpreting and acting upon consumers` traces is a prerequisite.

  14. Acceptability of GM foods among Pakistani consumers

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-01-01

    ABSTRACT In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers. PMID:27494790

  15. Acceptability of GM foods among Pakistani consumers.

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-04-02

    In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

  16. U-Pb dating of deformed mafic dyke and host gneiss: implications for understanding reworking processes on the western margin of the Archaean U3o8 Block, NE Sao Francisco Craton, Brazil

    International Nuclear Information System (INIS)

    Oliveira, Elson Paiva

    2000-01-01

    U-Pb ages of deformed mafic dyke and host migmatitic grey gneiss from the transition zone between the Archaen Uaua Block and the Caldeirao Belt are presented. Titanites from the metamorphic dyke's margin and zircons from the gneiss were dated at 2,039 ± 2 Ma and 2,956 ± 39 Ma, respectively. The Sm-Nd data (T DM =2,965 Ma and ε Nd(t) =1.69) on the gneiss, coupled with the U-Pb data on both dyke and gneiss, suggest than an Archaen granodioritic batholith, probably originated at an andean-type continental margin, was intruded by mafic dykes, and subsequently was reworked during the Paleoproterozoic collisional event associated with the development of the Salvador-Curaca Orogen. (author)

  17. Environmental and Energy Aspects of Construction Industry and Green Buildings

    Science.gov (United States)

    Kauskale, L.; Geipele, I.; Zeltins, N.; Lecis, I.

    2017-04-01

    Green building is an important component of sustainable real estate market development, and one of the reasons is that the construction industry consumes a high amount of resources. Energy consumption of construction industry results in greenhouse gas emissions, so green buildings, energy systems, building technologies and other aspects play an important role in sustainable development of real estate market, construction and environmental development. The aim of the research is to analyse environmental aspects of sustainable real estate market development, focusing on importance of green buildings at the industry level and related energy aspects. Literature review, historical, statistical data analysis and logical access methods have been used in the research. The conducted research resulted in high environmental rationale and importance of environment-friendly buildings, and there are many green building benefits during the building life cycle. Future research direction is environmental information process and its models.

  18. Applying science and mathematics to big data for smarter buildings.

    Science.gov (United States)

    Lee, Young M; An, Lianjun; Liu, Fei; Horesh, Raya; Chae, Young Tae; Zhang, Rui

    2013-08-01

    Many buildings are now collecting a large amount of data on operations, energy consumption, and activities through systems such as a building management system (BMS), sensors, and meters (e.g., submeters and smart meters). However, the majority of data are not utilized and are thrown away. Science and mathematics can play an important role in utilizing these big data and accurately assessing how energy is consumed in buildings and what can be done to save energy, make buildings energy efficient, and reduce greenhouse gas (GHG) emissions. This paper discusses an analytical tool that has been developed to assist building owners, facility managers, operators, and tenants of buildings in assessing, benchmarking, diagnosing, tracking, forecasting, and simulating energy consumption in building portfolios. © 2013 New York Academy of Sciences.

  19. The impact of clerestory lights on energy efficiency of buildings

    Directory of Open Access Journals (Sweden)

    Đenadić Dalibor M.

    2015-01-01

    Full Text Available The buildings are among major energy consumers, whose energy efficiency is rather low. Clerestory windows are responsible for a large portion of energy losses from the buildings. The energy efficiency of buildings can greatly be improved by upgrading clerestory and other windows. This paper focuses on the theoretical and experimental investigations on how this can be performed in an old school building in the town of Bor in eastern part of Serbia. For that purpose a modern measuring technique has been applied to identify the existing status, and to compare theoretical and actual conditions.

  20. Consumer Acceptability Of Irradiated Foods

    International Nuclear Information System (INIS)

    Awoyinka, A.; Akingbohungbe, A.E.

    1994-01-01

    Three commonly used food items; maize, beans and smoked fish were irradiated and consumer acceptability was tested through a questionnaire method. Subjects were residents in Ile-Ife, Nigeria. Respondents attitudes towards the processing and tasting of the food were very positive and the possibility of marketing the foods was suggested by them

  1. Consumer Preferences for Mass Customization

    NARCIS (Netherlands)

    B.G.C. Dellaert (Benedict); S. Stremersch (Stefan)

    2004-01-01

    textabstractIncreasingly, firms adopt mass customization, which allows consumers to customize products by self-selecting their most preferred composition of the product for a predefined set of modules. For example, PC vendors such as Dell allow customers to customize their PC by choosing the type of

  2. 76 FR 18349 - Consumer Leasing

    Science.gov (United States)

    2011-04-04

    ... FURTHER INFORMATION CONTACT: Stephen Shin, Attorney, or Benjamin K. Olson, Counsel, Division of Consumer... Workers (CPI-W), as published by the Bureau of Labor Statistics. Therefore, from July 21, 2011 to December..., Division of Research and Statistics, Mail Stop 95-A, Board of Governors of the Federal Reserve System...

  3. Designing a New Electricity Consumer

    DEFF Research Database (Denmark)

    Pallesen, Trine; Jenle, Rasmus Ploug

    The paper reports on a smart grid experiment for the making of a new retail electricity market integrating fluctuating electricity generation into electricity systems. An outline of design challenges faced by the market engineers when dealing with different and lacking conceptions of consumers...

  4. CONSUMER BETWEEN OBJECTIVE AND SUBJECTIVE

    Directory of Open Access Journals (Sweden)

    Răzvan Dina

    2013-06-01

    Full Text Available We live in a society where the consumer, due to the diversity and abundance of products and services whose characteristics are becoming more similar, has to make choices that are increasingly difficult. Another aspect that has led to a profound transformation of the consumer behavior is due to the large volume of information, supplied by the Internet, information which in some cases is not accurate, but is decisively influencing the consumer. In equal measure, the difficulty of making a purchasing decision is caused by the fact that with the opening to the global market, where the products and services were depersonalized, gaining common features, and where the concept of quality tends to no longer relate to the same standards as a few decades ago, having suffered major changes. The quality of products is a fundamental requirement of competitiveness, and quality assessment is a personal right of the consumer, because this is a direct effect of quality of life. (“Fundamentele ştiinţei mărfurilor” Dinu Vasile, 2008

  5. Consumer Behavior and Food Science

    NARCIS (Netherlands)

    Fischer, A.R.H.

    2015-01-01

    From the consumer's point of view, food is at the same time among the most trivial and the most complex of all product groups. Food is at the same time a mundane and a functional product. Sometimes we eat for sustenance, for example, while sitting behind our desks when typing reports, and at other

  6. Consumer perceptions of farmed fish

    NARCIS (Netherlands)

    Reinders, Machiel J.; Banović, Marija; Guerrero, Lluis; Krystallis, Athanasios

    2016-01-01

    Purpose: The purpose of this paper is to investigate possible cross-cultural consumer segments in the EU aquaculture market and provide direction and focus for marketing strategies for farmed fish products. Design/methodology/approach: Selected psychographic constructs (i.e. category involvement,

  7. Food sovereignty and consumer sovereignty

    NARCIS (Netherlands)

    Timmermann, Cristian; Félix, Georges F.; Tittonell, Pablo

    2017-01-01

    The concept of food sovereignty is becoming an element of everyday parlance in development politics and food justice advocacy. Yet to successfully achieve food sovereignty, the demands within this movement have to be compatible with the way people are pursuing consumer sovereignty and vice versa.

  8. Social media and consumer choice

    NARCIS (Netherlands)

    Bronner, F.; de Hoog, R.

    2014-01-01

    Social media are becoming increasingly important for consumer decisions. This holds true in particular for vacation decision-making, as an example of a high-involvement decision. The research focuses upon the relation between the information people search regarding aspects or properties of choice

  9. Consumer surplus and CES demand

    NARCIS (Netherlands)

    ten Raa, Thijs

    2015-01-01

    This article presents the consumer surplus formula for constant elasticity of substitution (CES) demands. The formula is used to compare the monopoly and optimum provisions of product variety. It is shown that a monopolist under-provides variety. This result is contrasted with Lambertini’s analysis

  10. The female innovation-generation consumer's evaluation

    African Journals Online (AJOL)

    user

    to date is the millennial consumer segment ... consumers (Eastman et al, 2014; Pérez-Luño et al, 2011), due to their love of technology and the virtual world. Consumers of the innovation- generation were born between 1980 and 2000 and currently fall in the age ... The constantly changing media habits of consumers ...

  11. A signaling theory of consumer boycotts

    NARCIS (Netherlands)

    Heijnen, P.; van der Made, A

    We present a theory that explains the prevalence of consumer boycotts. In our model, a firm does not know how concerned consumers are about the firm's misconduct. Because it is only optimal for the firm to alter its behavior if consumers are very concerned, consumers have an incentive to overstate

  12. Information Sensitive Consumers and Market Information.

    Science.gov (United States)

    Price, Linda L.; And Others

    1987-01-01

    Past research on consumer information has emphasized the effects of informed consumers of the provision of goods by sellers. This paper examines the effects of informed consumers on other consumers' product choices. These are demand-side effects. Directions for research are outlined. Author/CH)

  13. Choisen problems of the consumer protection

    OpenAIRE

    HUML, Jan

    2010-01-01

    The main aim is to determine consumers' awareness of their rights in the area of consumer protection. Secondary targets are to explored the reason of ignorance of law, determine consumer satisfaction with consumer protection and design measures to improve the situation.

  14. 7 CFR 1230.5 - Consumer information.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Consumer information. 1230.5 Section 1230.5 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... CONSUMER INFORMATION Pork Promotion, Research, and Consumer Information Order Definitions § 1230.5 Consumer...

  15. Consumer Behavior Determined by Social Classes

    OpenAIRE

    ªerban Comãnescu Adrian; Muhcinã Silvia

    2011-01-01

    Information on consumer behavior is essential in trade policy decision-making process. The study of consumer behavior has concerned different subjects:psychology, sociology, economy. In a marketing approach knowledge of consumer behavior is not an end in itself, but only a tool, a means by which business decisions are adapted to the consumer expectations.

  16. 76 FR 78500 - Consumer Leasing (Regulation M)

    Science.gov (United States)

    2011-12-19

    ... BUREAU OF CONSUMER FINANCIAL PROTECTION 12 CFR Part 1013 [Docket No. CFPB-2011-0026] RIN 3170-AA06 Consumer Leasing (Regulation M) AGENCY: Bureau of Consumer Financial Protection. ACTION: Interim final rule... Protection Act (Dodd-Frank Act) transferred rulemaking authority for a number of consumer financial...

  17. The Influence of Brand Image and Advertising on Consumer Buying Behavior in Telkomsel 4g Package Plan

    OpenAIRE

    Umboh, Frederik Jibrael; Tielung, Maria V.J

    2016-01-01

    This research is about to analyze the influence of brand image and advertising on consumer buying behavior in Telkomsel 4G package plan. Consumer buying behavior plays an important role to increase sales of a company's product. In order to attract consumer buying behavior, company need to implement some strategies to increase their sales. Strategy that must be considered by Telkomsel to increase 4G users they are building a stronger brand image and massive promotion through their advertising ...

  18. A Perspective on Consumers 3.0: They Are Not Better Decision-Makers Than Previous Generations

    OpenAIRE

    Petr eHoudek; Petr eHoudek; Petr eHoudek

    2016-01-01

    This perspective article builds upon the theory of local thinking in interpretation and prediction of consumer behavior in a contemporary world of information overload. It is shown that even informed and socially and environmentally responsible consumers (consumers 3.0) exhibit selective recall, limited attention and bounded search in the perception and interpretation of price and quality of purchases. Their decisions fall into local cognitive frames, which specifically focus attention only o...

  19. A Perspective on Consumers 3.0: They Are Not Better Decision-Makers than Previous Generations

    OpenAIRE

    Houdek, Petr

    2016-01-01

    This perspective article builds upon the theory of local thinking in interpretation and prediction of consumer behavior in a contemporary world of information overload. It is shown that even informed and socially and environmentally responsible consumers (consumers 3.0) exhibit selective recall, limited attention, and bounded search in the perception and interpretation of price and quality of purchases. Their decisions fall into local cognitive frames, which specifically focus attention only ...

  20. Consumer behaviour towards new products

    Directory of Open Access Journals (Sweden)

    Bucatariu Mihaela

    2017-07-01

    Full Text Available The main purpose of this paper is to find a structure of consumer behaviour, especially regarding the preference for the newly-released products from the market. We intend to study the impact of the new, innovative products compared to the traditional ones. Empirical research is based on the selling mix of a company in Romania and Austria. The analysis of this case will be done with the support of an econometric model of simple regression. This research confirms the validation of the structure and the attitude of the consumers towards the new products, launched by that company. By applying this linear model, it is possible to identify the percentage of the increase or decrease in consumption of new products. The need of carrying out this study regarding the impact of the consumption of new products is to create a profile and to find the causes that influence their acquisition. The originality of this paper lays in studying some aspects of influence over the consumption of new products from McDonald’s in Romania and Austria. Where does McDonald’s stand regarding the digitalization? It is not enough to sell new products; it is also necessary to bring innovation in the organization. Nowadays consumers are more present in the online environment and retailers are adapting at a fast pace to their needs of direct communication and transparency. How does a company that faces Slow Food and Bio era, deal with consumers who are more preoccupied with the nutritive values of the nourishment act? Platforms for real-time communication with clients such as “Our food. Your question” redefined the term of transparency and helped McDonald’s stop bad rumors. The results of the research will show us if there really is transformation in behaviour towards traditional products and in what degree consumers are influenced by innovation.

  1. Sustainable Buildings in Interaction

    DEFF Research Database (Denmark)

    Elle, Morten

    2007-01-01

    The first attempts to build sustainable buildings in Denmark were typically located on the countryside. The basic idea was to create buildings that were independent of the technical infrastructure. District heating has, however, been the dominating solution to heating in buildings in Denmark......, and the focus on sustainable building have gradually turned from special houses on the countryside to normally looking houses in the urban fabric, integrated in the technical infrastructure. Some new built urban areas in Denmark will, however, not have to be supplied with district heating – these developments...... are going to consist of passive houses. The first sustainable buildings were built by their users, and the user – building interaction still play a decisive role for the performance of the present sustainable buildings. The users have to understand how the building functions. Urban design is essential...

  2. Integrating Responsive Building Elements in Buildings

    DEFF Research Database (Denmark)

    Haase, Matthias; Amato, Alex; Heiselberg, Per

    2006-01-01

    energy strategies to develop guidelines and procedures for estimation of environmental performance of responsive building elements and integrated building concepts This paper introduces the ideas of this collaborative work and discusses its usefulness for Hong Kong and China. Special focus was put...

  3. Challenges in Commercial Buildings | Buildings | NREL

    Science.gov (United States)

    systems Assessing the energy and economic impacts of various technologies, giving priority to those that standardized language for commercial building energy audit data that can be used by software developers to exchange data between audit tools, and can be required by building owners and audit program managers to

  4. Bellanca building, Yellowknife : building envelope retrofit project

    Energy Technology Data Exchange (ETDEWEB)

    Rajewski, G. [A.D. Williams Engineering Inc., Edmonton, AB (Canada)

    2008-07-01

    The Bellanca building is a ten-story, commercial office building, located in Yellowknife, Northwest Territories. The owner was concerned about annual fuel consumption, relative to other buildings of similar size. Tenants reported cold drafts and some ice build-up had been reported in the past, on the exterior of the cladding. In addition, some water penetration had occurred during rainfall. This presentation provided background information on the Bellanca building and discussed a building envelope retrofit project. A.D. Williams was hired in late 2006 in order to provide an opinion on the present condition of the building envelope. This presentation described the site investigation and presented an interior and exterior review of the building. It also presented a thermographic survey in order to map thermal anomalies and establish trends. Following acceptance of the report on findings, one of five options was selected for further development. This included removal of existing cladding, exterior gypsum wallboard, fiberglass insulation and application of BASF Walltite CT foam, sheathing, rigid insulation, drainage plane and new cladding. The preliminary design was then presented. This paper also described the tender and award of the contract; construction phase; and substantial completion of the project. tabs, figs.

  5. Materialism, status consumption, and consumer independence.

    Science.gov (United States)

    Goldsmith, Ronald Earl; Clark, Ronald A

    2012-01-01

    Materialism influences many people. We focus on two aspects of this influence: reactions to prestige products and to the influence of others. A study of 187 U.S. student consumers shows that materialism is positively related to buying products that confer status. In contrast, materialism is negatively related to consumer independence, an enduring tendency to pay minimal attention to the prescribed norms of other consumers and to make product and brand decisions according to personal preferences. Consuming products for status is also negatively related to consumer independence. Moreover, the association between materialism and consumer independence is completely mediated by consuming for status. Materialism urges consumers to be status conscious so that they follow social norms in purchasing, but seeking status through goods is avoided by less materialistic, independent consumers. A second study (n = 258) also using student consumers confirmed these results.

  6. Measuring Consumer Innovativeness: Identifying Innovators among Consumers of Modern Technologies

    Directory of Open Access Journals (Sweden)

    Jana Filová

    2015-12-01

    Full Text Available The methods currently used in innovation marketing research are focused on the late phases of the innovation process and are usually methodologically complex. This limits their practical impact. The presented work aims to create a simple self-report scale applicable in the initial and late phases of the innovation process, highly modular and suitable for a wide range of research. The main battery of questions was inspired by the adopter categorization by Rogers. The questions determine both (1 general characteristics of innovation adopters and (2 their relationship to a specific innovation. The scale was tested during robust longitudinal online research, thematically focused on users of modern technologies. A representative sample of 4,000 Internet users in the Czech Republic took part in the survey from 2013 to 2015. The result is a new self-report scale measuring consumer innovativeness applicable for prototyping, strategic decisions and effective communication of innovations to consumers.

  7. Windows constructons from ecological materials fullfilling specifications of low energy consuming - and passive building architecture as also the new energy conservation ordinance; Fensterkonstruktion aus oekologischen Baustoffen entsprechend den Anforderungen der Niedrigenergie- und Passivhausbauweise sowie der neuen Energieeinsparverordnung EnEV. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Mack, R.

    2002-04-01

    A newly developed window system for passive standard buildings was investigated with regard to its thermal properties, airtightness, tightness in driving rain, and acoustic properties. The emphasis was on the optimisaiton of the total heat transfer coefficient and the absence of cold gaps between windows, frames, and walls. This involved simulations in consideration of the Energy Conservation Ordinance and current standards and regulations. The measurements and simulations proved that the window was superior to the requirements of current regulations, so the window system was certified as a recommended component for passive buildings (''Passivhaustaugliche Komponente''). Further, an ecological life cycle analysis was carried out, also with good results. A marketing strategy was developed for the new window system and for other components produced by medium-sized organizations.

  8. Consumer's Negative emotions, Financial Decisions, Financial Advice

    OpenAIRE

    Konstantaki, Violetta

    2007-01-01

    Abstract The purpose of this study is to explore the consumers decision making process. In particular, this study attempts to examine consumers negative emotions, which elicit during a decision processing. Especially, the case of a financial decision will be examined. Moreover, consumers negative emotion will be investigated in relation with consumers coping behaviour. To be more specific, the option of seeking advice as a successful consumers coping behaviour will be explor...

  9. Service quality in consumer's credit branch

    OpenAIRE

    Blechová, Věra

    2008-01-01

    The diploma thesis deals with consumer's credit grants of banking and non-banking corporations and comparison of their service quality. The first part of research is dedicated to consumer's knowledge of credit issues. Second describes main difficulties of consumer's credit grants of banking and non-banking corporations and proves their use of unfair manners. The final part of thesis propose improvements, which will boost consumer's protection on field of consumer's credits.

  10. Consumer experiences in a consumer-driven health plan.

    Science.gov (United States)

    Christianson, Jon B; Parente, Stephen T; Feldman, Roger

    2004-08-01

    To assess the experience of enrollees in a consumer-driven health plan (CDHP). Survey of University of Minnesota employees regarding their 2002 health benefits. Comparison of regression-adjusted mean values for CDHP and other plan enrollees: customer service, plan paperwork, overall satisfaction, and plan switching. For CDHP enrollees only, use of plan features, willingness to recommend the plan to others, and reports of particularly negative or positive experiences. There were significant differences in experiences of CDHP enrollees versus enrollees in other plans with customer service and paperwork, but similar levels of satisfaction (on a 10-point scale) with health plans. Eight percent of CDHP enrollees left their plan after one year, compared to 5 percent of enrollees leaving other plans. A minority of CDHP enrollees used online plan features, but enrollees generally were satisfied with the amount and quality of the information provided by the CDHP. Almost half reported a particularly positive experience, compared to a quarter reporting a particularly negative experience. Thirty percent said they would recommend the plan to others, while an additional 57 percent said they would recommend it depending on the situation. Much more work is needed to determine how consumer experience varies with the number and type of plan options available, the design of the CDHP, and the length of time in the CDHP. Research also is needed on the factors that affect consumer decisions to leave CDHPs.

  11. Applied building physics

    CERN Document Server

    Hens, Hugo S L C

    2012-01-01

    The energy crises of the 1970s, persisting moisture problems, complaints about sick buildings, thermal, visual and olfactory discomfort, and the move towards more sustainability in building construction have pushed Building Physics to the forefront of building innovation. The societal pressure to diminish energy consumption in buildings without impairing usability acted as a trigger to activate the whole notion of performance based design and construction. As with all engineering sciences, Building Physics is oriented towards application, which is why, after a first book on fundamentals this s

  12. Impact of Mobile advertising on consumer attitudes in Algeria: case study of Ooredoo

    OpenAIRE

    Amina Merabet; Abderrezzak Benhabib; Abderrezzak Merabet

    2017-01-01

    Mobile advertising is a perfect tool to build a relationship based on proximity between brand and consumer. It is tactile, interactive, and personalized. As few studies have focused on this con-cept, particularly in the Algerian context, we aim in this research to show the role of mobile ad-vertising on consumer attitudes. After a literature review, an empirical study is conducted among150 students in Tlemcen city. Results, using regression analysis, show that attitude to-wards mobile adverti...

  13. Estimating building energy consumption using extreme learning machine method

    International Nuclear Information System (INIS)

    Naji, Sareh; Keivani, Afram; Shamshirband, Shahaboddin; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Mansor, Zulkefli; Lee, Malrey

    2016-01-01

    The current energy requirements of buildings comprise a large percentage of the total energy consumed around the world. The demand of energy, as well as the construction materials used in buildings, are becoming increasingly problematic for the earth's sustainable future, and thus have led to alarming concern. The energy efficiency of buildings can be improved, and in order to do so, their operational energy usage should be estimated early in the design phase, so that buildings are as sustainable as possible. An early energy estimate can greatly help architects and engineers create sustainable structures. This study proposes a novel method to estimate building energy consumption based on the ELM (Extreme Learning Machine) method. This method is applied to building material thicknesses and their thermal insulation capability (K-value). For this purpose up to 180 simulations are carried out for different material thicknesses and insulation properties, using the EnergyPlus software application. The estimation and prediction obtained by the ELM model are compared with GP (genetic programming) and ANNs (artificial neural network) models for accuracy. The simulation results indicate that an improvement in predictive accuracy is achievable with the ELM approach in comparison with GP and ANN. - Highlights: • Buildings consume huge amounts of energy for operation. • Envelope materials and insulation influence building energy consumption. • Extreme learning machine is used to estimate energy usage of a sample building. • The key effective factors in this study are insulation thickness and K-value.

  14. Ten questions concerning integrating smart buildings into the smart grid

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, Thomas M.; Boudreau, Marie-Claude; Helsen, Lieve; Henze, Gregor; Mohammadpour, Javad; Noonan, Doug; Patteeuw, Dieter; Pless, Shanti; Watson, Richard T.

    2016-11-01

    Recent advances in information and communications technology (ICT) have initiated development of a smart electrical grid and smart buildings. Buildings consume a large portion of the total electricity production worldwide, and to fully develop a smart grid they must be integrated with that grid. Buildings can now be 'prosumers' on the grid (both producers and consumers), and the continued growth of distributed renewable energy generation is raising new challenges in terms of grid stability over various time scales. Buildings can contribute to grid stability by managing their overall electrical demand in response to current conditions. Facility managers must balance demand response requests by grid operators with energy needed to maintain smooth building operations. For example, maintaining thermal comfort within an occupied building requires energy and, thus an optimized solution balancing energy use with indoor environmental quality (adequate thermal comfort, lighting, etc.) is needed. Successful integration of buildings and their systems with the grid also requires interoperable data exchange. However, the adoption and integration of newer control and communication technologies into buildings can be problematic with older legacy HVAC and building control systems. Public policy and economic structures have not kept up with the technical developments that have given rise to the budding smart grid, and further developments are needed in both technical and non-technical areas.

  15. Consumer perception of bread quality

    Directory of Open Access Journals (Sweden)

    Ľudmila Nagyová

    2009-01-01

    Full Text Available The aim of this paper is to evaluate consumers’ perception of bread quality in Slovakia. Bread belongs to essential foodstuffs and we all have it served on our table every day.Cereal products keep their importance in people’s nutrition mainly because of their preventive effects on health. They saturate about 40 % of the daily energy need of an average European, who in ave­ra­ge acquires from cereals about 30 % of proteins, vitamin B1, niatin and phosphorus, around 1/6 of fats (out of it 19 % of linol acid, almost 60 % of saccharides, Ľ iron and about 13 % of vitamin B2 and calcium. If we add some cereal fiber which is an effective prevention factor of cardiovascular di­sea­ses, metabolic and oncological diseases of colon and anus, we will get a complex picture about positive effects of cereals in our nutrition. If we were to mark any foodstuff which has been accompanying the mankind in the course of history, it could be bread. Its consummation is spread in the whole world. Only the ones who once suffered from its lack have recognized its value.It results from our research that consumers in Slovakia prefer consuming the wheat-ray bread (38.5 %. The respondents – consumers prefer at choosing buying bread in terms of the external, subjective factors, the overall shape when choosing bread (45 % and dark color of crust (25 %. They showed minimum interest in white color crust and packaging size. In terms of the internal, objective factors, the most important factor for respondents, for women as well as for men was freshness of foodstuffs followed by fiber (with a big difference (12.82 %.Almost 60 % of bread consumers claimed that they did not have any possibility to obtain the required information regarding bread in supermarkets and hypermarkets because it is not possible to find professional staff providing them with the required information. A different situation is in the classical, small, self-service, and

  16. Upgrade Opportunities for Buildings in City Centres

    Directory of Open Access Journals (Sweden)

    Silva M.

    2012-10-01

    Full Text Available This proposal focus on the potential of the existing buildings upgrade process in achieving the 20-20-20 goals, as these are the biggest energy consumers, the most significant built area and the better placed buildings within our cities. These buildings frequently lack basic maintenance and need intervention, but include within themselves a vast amount of incorporated energy and centuries of construction knowledge. Beyond the advantages that may result from re-attracting people back into the city centre, upgrading these existing buildings can also have positive bounce-back effect on the reduction of the energy needs related to transportation, as demonstrated in studies that alert to the impact of the building sprawl in the total energy use. As “buildings account for 40 % of total energy consumption in the Union”, the better performance of this sector has a significant role, remembering that “these requirements shall take account of general indoor climate conditions, in order to avoid possible negative effects such as inadequate ventilation, as well as local conditions and the designated function and the age of the building” [1]. The importance of “upgrading” the existing buildings resides on the fact that new buildings represent only approximately 1 or 2% of the total usable area, an estimate that is bound to decrease due to the current construction crisis. While the recent buildings tend to be more efficient, the numerous existing buildings are important stakeholders due to their massive consumptions and incorporated energy. The ongoing Annex 56 on “Energy & Greenhouse Gas Optimized Building Renovation” assumes that “Current standards do not respond effectively to the numerous constraints imposed by existing buildings and in many cases, the requirements result in very expensive measures and complex procedures, seldom accepted by occupants, owners or developers. It is then urgent for the new standards to respond to these

  17. The US considers consumer choice

    International Nuclear Information System (INIS)

    McCaughey, John.

    1996-01-01

    About half the states in the USA are seriously considering giving domestic customers the right to choose their own gas supplier as large consumers have been able to for years. This is referred to as ''unbundling''. Of the 1400 or so natural gas local distribution companies (LDCs), about one third appear to support unbundling, another third are opposed and the remainder are uncertain; small and medium sized LDCs are most likely to be opposed. A number of state regulators are also ambivalent or actively hostile to the idea. The LDCs supply consumers with gas at the price the LDC pays for it. Their profits are made from connections and the transport of as large a volume of gas as possible for which the supplier pays passthrough charges. The complex arguments as to whether unbundling will prove favourable to the LDCs and what benefits and disadvantages there may be for customers are examined. (UK)

  18. Consumer Profile Of Hunting Tourism

    Directory of Open Access Journals (Sweden)

    Diana Marin

    2015-05-01

    Full Text Available Knowing the profileof hunting tourism consumers is particularly useful to the administrators ofhunting funds or natural parks, and of travel agencies that develop huntingtourism products for the hunting of large game for trophy, of small game asrecreational activity and also for the experienced hunting tourists who loveadventure and hunting with traditional weapons. The motivation for huntingconsists in the existing fauna in a certain area, but there are also cultural,historical reasons or spending time in the middle of nature. Consumers ofhunting tourism have a wide range of ages: hunting tourists prefer watching theanimals in their natural habitat and are less adventure-oriented, unlike trophyhunting tourists who are self-contended, travel much and wish to know thehistory, the culture and the behaviour of animals in protected areas. Theyprefer special accommodation and transport conditions and rely on largeincomes: they wish to get the rarest trophies to display back home as a symbolof their hunting skills and courage

  19. Consumer behaviour and the environment

    DEFF Research Database (Denmark)

    Thøgersen, John

    2005-01-01

    -style are not easily achieved, however. In a report issued by United Na-tions Secretary-General Kofi Annan in preparation for the Johannesburg Summit it was concluded that "Progress towards the goals established at Rio has been slower than anticipated and in some respects conditions are worse than they were ten years...... ago." It continues to be true that a funda-mental requirement for success in this endeavour is consumers' active support and willing participation (Norwegian Ministry of Environment, 1994). Information is an important tool in this connection. Not only for marshalling public support......, that information alone is usually not sufficient to change behaviour (Stern, 1999). My aim here is to present a broad-brush overview of some of the most important roles that information has been found to play as a tool for pro-moting environmentally responsible consumer behaviour. Because this publication...

  20. Are contemporary tourists consuming distance?

    DEFF Research Database (Denmark)

    Larsen, Gunvor Riber

    2012. Background The background for this research, which explores how tourists represent distance and whether or not distance can be said to be consumed by contemporary tourists, is the increasing leisure mobility of people. Travelling for the purpose of visiting friends and relatives is increasing...... of understanding mobility at a conceptual level, and distance matters to people's manifest mobility: how they travel and how far they travel are central elements of their movements. Therefore leisure mobility (indeed all mobility) is the activity of relating across distance, either through actual corporeal...... metric representation. These representations are the focus for this research. Research Aim and Questions The aim of this research is thus to explore how distance is being represented within the context of leisure mobility. Further the aim is to explore how or whether distance is being consumed...

  1. Consumer-Related Food Waste

    DEFF Research Database (Denmark)

    Aschemann-Witzel, Jessica; Hooge, Ilona de; Normann, Anne

    2016-01-01

    Food waste has received increasing attention in recent years. As part of their corporate social responsibility strategies, food supply chain actors have started to act towards avoiding and reducing food waste. Based on a literature review, an expert interview study, and example cases, we discuss...... food marketing and the role and responsibility of retail. Food marketing and retailing contribute to consumer-related food waste via decisions on date labeling, packaging sizes and design elements, and pricing strategies encouraging overpurchase, as well as communication shifting consumer priorities...... to the disadvantage of food waste avoidance. Potential actions to tackle food waste relate to improved packaging and information, altering pricing strategies, and cooperation with other actors across the supply chain. Three cases highlight the extent to which moral and strategic motives are interlinked...

  2. Food irradiation and consumer values

    International Nuclear Information System (INIS)

    Bruhn, C.M.; Schutz, H.G.; Sommer, R.

    1988-01-01

    A mail survey technique was used to determine if value hierarchy, locus of control, innovativeness, and demographic parameters could distinguish between subjects expressing different levels of concern and willingness to buy irradiated food. Concern toward irradiated food was lower than concern for other food safety issues, probably because many expressed uncertainty regarding irradiation. Those ranking the value “an ecologically balanced world” expressed the greatest irradiation concern. Factors which could predict high irradiation concern were being highly concerned about the use of chemical sprays on food, completing more formal education and being female; those believing that life was controlled by luck were less concerned. Irradiation concern was a principal factor determining willingness to buy irradiated foods. Innovative consumers were more likely to try irradiated foods than noninnovative. Implications for consumer education are presented

  3. Connecting cognition and consumer choice.

    Science.gov (United States)

    Bartels, Daniel M; Johnson, Eric J

    2015-02-01

    We describe what can be gained from connecting cognition and consumer choice by discussing two contexts ripe for interaction between the two fields. The first-context effects on choice-has already been addressed by cognitive science yielding insights about cognitive process but there is promise for more interaction. The second is learning and representation in choice where relevant theories in cognitive science could be informed by consumer choice, and in return, could pose and answer new questions. We conclude by discussing how these two fields of research stand to benefit from more interaction, citing examples of how interfaces of cognitive science with other fields have been illuminating for theories of cognition. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Utility unbundling : large consumer's perspective

    International Nuclear Information System (INIS)

    Block, C.

    1997-01-01

    The perspectives of Sunoco as a large user of electric power on utility unbundling were presented. Sunoco's Sarnia refinery runs up an energy bill of over $60 million per year for electricity, natural gas (used both as a feedstock as well as a fuel), natural gas liquids and steam. As a large customer Sunoco advocates unbundling of all services, leaving only the 'pipes and wires' as true monopolies. In their view, regulation distorts the market place and prevents the lower prices that would result from competition as has been seen in the airline and telephone industries. Sunoco's expectation is that in the post-deregulated environment large and small consumers will have a choice of energy supplier, and large consumers will increasingly turn to co-generation as the most desirable way of meeting their power needs

  5. Understanding the Production of Meaning and Action Organizational to Building the Process of the Consumer Behavior: An Exploratory Analysis Compreender a Produção de Sentidos e o Agir Organizacional para Construção do Processo de Comportamento do Consumidor: uma Análise Exploratória

    Directory of Open Access Journals (Sweden)

    André Luis Silva

    2011-12-01

    Full Text Available This article was conducted with the objective to support the proposal for a scheme of interpretation of the construction of consumer behavior based on the understanding the production of meanings held by people and the proposition of the organization acting. According to Solomon (2002 consumer behavior is understood by the steps of buying, owning and being. Thus, by means of a theoretical qualitative, descriptive and exploratory, we started with the premise that the process of consumer behavior is initiated by a stimulation of consumption that its success has caused the organization acting and production of meanings held by people , is to learn from best in ethical factors. As a result, it was understood that the construction process of consumer behavior is an act constituted by the dimensions of people and organizations. This act it is a cyclical relationship that travels between the ethics of conviction of the person and ethical responsibility of organizations, this being the factor that allows them to influence and be expressed in behaviors that influence marketing system. Thus, the interpretation scheme proposed in this study reveals that the process of consumer behavior stems from an act of meaning that emerges from the cooperative interaction among ethical organizations and individuals when faced with stimuli of consumption.Este artigo foi realizado com o objetivo de fundamentar a proposta de um esquema de interpretação do processo de construção do comportamento do consumidor a partir da compreensão da produção de sentidos realizada pelas pessoas e a proposição do agir organizacional. Segundo Solomon (2002, o comportamento do consumidor é compreendido pelas etapas de comprar, possuir e ser. Assim, por meio de um ensaio teórico de natureza qualitativa, e de perspectiva exploratória, partiu-se da premissa que o processo de comportamento do consumidor inicia-se por um estímulo de consumo que detém seu êxito decorrente do agir

  6. Requirements for existing buildings

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

    This report collects energy performance requirements for existing buildings in European member states by June 2012.......This report collects energy performance requirements for existing buildings in European member states by June 2012....

  7. Green Building Standards

    Science.gov (United States)

    Many organizations have developed model codes or rating systems that communities may use to develop green building programs or revise building ordinances. Some of the major options are listed on this page.

  8. Introduction: Green Building Handbook

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-08-01

    Full Text Available By recognising the specific environmental challenges facing South Africa, mindful of the government‘s commitment to reducing South Africa‘s Greenhouse gas emissions, and acknowledging the need to build social cohesion, the Green Building Handbook...

  9. Integrated Building Health Management

    Data.gov (United States)

    National Aeronautics and Space Administration — Abstract: Building health management is an important part in running an efficient and cost-effective building. Many problems in a building’s system can go undetected...

  10. Building the Korogwe Laboratory

    DEFF Research Database (Denmark)

    Knudsen, Jakob; von Seidlein, Lorenz; Richard, Jean Pierre

    2011-01-01

    An illustrated description of the building of a biomedical research laboratory in Korogwe, Tanzania.......An illustrated description of the building of a biomedical research laboratory in Korogwe, Tanzania....

  11. Sustainable Building Operation

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2009-01-01

    of sustainable building operation and a survey amongst building administrators from the private and the social housing sector. Our results show that there are many good examples on sustainable building operation in Danish housing estates, where local building managers, residents etc. have gained impressive......Energy-savings in the existing building stock have becomes a main goal in national and international policies. Often focus is on building-renovations, whereas the potential of sustainable building operation to a large extent has been neglected. Nevertheless, international research as well...... as practical experiences from Danish housing estates indicates that there are large potentials for energy savings by focusing on the operation of the buildings. We suggest that in order to achieve sustainability in the existing housing, renovation and operations should be seen as integrated parts...

  12. Robotic buildings(s)

    NARCIS (Netherlands)

    Bier, H.H.

    2014-01-01

    Technological and conceptual advances in fields such as artificial intelligence, robotics, and material science have enabled robotic building to be in the last decade prototypically implemented. In this context, robotic building implies both physically built robotic environments and robotically

  13. Environmental indicators for buildings

    DEFF Research Database (Denmark)

    Dammann, Sven

    Environmental Indicators for Buildings are studied using two different perspectives: with a technological, environmental scientific departing point and with a social scientific departing point. Different relevant groups in the building sector are identified and analysed, using the Social...

  14. Building Design & Construction - Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-11-01

    Offers a brief history of green building; presents the results of a specially commissioned survey; and analyzes the chief trends, issues, and published research, based on interviews with dozens of experts and participants in green building.

  15. Buildings interoperability landscape - Draft

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, Dave B. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

    2015-02-01

    Buildings are an integral part of our nation’s energy economy. The advancement in information and communications technology (ICT) has revolutionized energy management in industrial facilities and large commercial buildings. As ICT costs decrease and capabilities increase, buildings automation and energy management features are transforming the small-medium commercial and residential buildings sectors. A vision of a connected world in which equipment and systems within buildings coordinate with each other to efficiently meet their owners’ and occupants’ needs, and where buildings regularly transact business with other buildings and service providers (such as gas and electric service providers) is emerging. However, while the technology to support this collaboration has been demonstrated at various degrees of maturity, the integration frameworks and ecosystems of products that support the ability to easily install, maintain, and evolve building systems and their equipment components are struggling to nurture the fledging business propositions of their proponents.

  16. Advertising Expenditure and Consumer Prices

    OpenAIRE

    Ferdinand Rauch

    2011-01-01

    This paper studies the effect of a change in the marginal costs of advertising on advertising expenditures of firms and consumer prices across industries. It makes use of a unique policy change that caused a decrease of the taxation on advertising expenditures in parts of Austria and a simultaneous increase in other parts. Advertising expenditures move immediately in the opposite direction to the marginal costs of advertising. Simultaneously the price reaction to advertising is negative in so...

  17. The future of consumer cameras

    Science.gov (United States)

    Battiato, Sebastiano; Moltisanti, Marco

    2015-03-01

    In the last two decades multimedia, and in particular imaging devices (camcorders, tablets, mobile phones, etc.) have been dramatically diffused. Moreover the increasing of their computational performances, combined with an higher storage capability, allows them to process large amount of data. In this paper an overview of the current trends of consumer cameras market and technology will be given, providing also some details about the recent past (from Digital Still Camera up today) and forthcoming key issues.

  18. Drug use as consumer behavior.

    Science.gov (United States)

    Foxall, Gordon Robert; Sigurdsson, Valdimar

    2011-12-01

    Seeking integration of drug consumption research by a theory of memory function and emphasizing drug consumption rather than addiction, Müller & Schumann (M&S) treat drug self-administration as part of a general pattern of consumption. This insight is located within a more comprehensive framework for understanding drug use as consumer behavior that explicates the reinforcement contingencies associated with modes of drug consumption.

  19. Investor response to consumer elasticity

    International Nuclear Information System (INIS)

    Grenaa Jensen, Stine; Meibom, Peter; Ravn, H.F.; Straarup, Sarah

    2004-01-01

    In the Nordic electricity system there is considerable uncertainty with respect to the long-term development in production capacity. The process towards liberalisation of the electricity sector started in a situation with a large reserve margin, but this margin is gradually vanishing. Since the potential investors in new production capacity are unaccustomed with investments under the new regime it is unknown if and when investments will take place. The electricity price is the key market signal to potential investors. The price is settled as a balance between supply and demand, and it is generally assumed that the demand side has an important role in this, and increasingly so. However, since consumers have not earlier had the incentive to respond to electricity prices, no reliable estimate of demand elasticity is known. The purpose of the present study is to analyse the role of electricity demand elasticity for investments in new electricity production capacity. Electricity price scenarios generated with a partial equilibrium model (Balmorel) are combined with a model of investment decisions. In this, various scenarios concerning the development in the demand elasticity are used. The simulated investment decisions are taken in a stochastic, dynamic setting, where a key point is the timing of the investment decision in relation to the gathering of new information relative to the stochastic elements. Based on this, the consequences of the development in consumer price elasticity for investments in a base load and a peak load plant are investigated. The main result of the analysis is that peak load investments can be made unprofitable by the development in consumer price elasticity, such that an investor will tend to wait with his peak load investment, until the development in consumer price elasticity has been revealed. (au)

  20. Modeling the Temperature Effect of Orientations in Residential Buildings

    Directory of Open Access Journals (Sweden)

    Sabahat Arif

    2012-07-01

    Full Text Available Indoor thermal comfort in a building has been an important issue for the environmental sustainability. It is an accepted fact that their designs and planning consume a lot of energy in the modern architecture of 20th and 21st centuries. An appropriate orientation of a building can provide thermally comfortable indoor temperatures which otherwise can consume extra energy to condition these spaces through all the seasons. This experimental study investigates the potential effect of this solar passive design strategy on indoor temperatures and a simple model is presented for predicting indoor temperatures based upon the ambient temperatures.