WorldWideScience

Sample records for construction tendering processes

  1. Tender Systems and Processes within the Mauritian Construction Industry: Investigating the Predominance of International Firms and the Lack of Absorptive Capacity in Local Firms

    OpenAIRE

    K. Appasamy; P. Paul

    2016-01-01

    Mauritius, a developing small-island-state, is facing a recession which is having a considerable economic impact particularly on its construction sector. Further, the presence of foreign entities, both as companies and workers, within this sector is creating a very competitive environment for local firms. This study investigates the key drivers that allow foreign firms to participate in this sector, in particular looking at the international and local tender processes, and the capacity of loc...

  2. Assessment Of Ethical Behavior Among Professionals At Procurement And After Tendering Process With Its Impacts And Drivers In Nepalese Construction Industry

    Directory of Open Access Journals (Sweden)

    Ram Sagar Yadav

    2015-08-01

    Full Text Available Objective of this study is to assess ethical behavior among professionals at procurement and after tendering process with its impacts and drivers in Nepalese Construction Industry. Different literatures were reviewed to assess ethical practices along with its cause and effect inside Nepalese Construction Industry. Pilot study was conducted for the validity of the questionnaire. One key informant from each selected organization was interviewed. The questionnaire contains shortcomings of ethical behavior at procurement and after tendering phase impact of shortcomings of ethical practices and factors leading to these ethical practices based on the objectives of the research. Five ranking Likert Scale were used. The collected data were analyzed based on relative importance index RII in three different categories as Investigating Offices 3 numbers Professional Associations 4 numbers and Government Departments 4 numbers with total of 11 organizations. All together 240 respondents were targeted out of which 170 response were collected with response rate of 70.83. The research shows that for commitment of professionals The overall level of unethical conduct in construction industry is placed at first rank with agreement level of 72.7. For Professionals shortcomings of ethical behavior at procurement phase Individuals or organizations undertaking work without adequate qualification experience training is placed at first rank with agreement level of 68.00. For Professionals shortcomings of ethical behavior after awarding the Tender Contractors professional dont dispose waste in suitable and safe ways which is friendly with the environment is placed at first rank with agreement level of 67.50. For factors lead to shortcomings of ethical behavior Personal culture or personal behavior is placed at first rank with agreement level of 78.20. From the research it is clear that shortcomings of ethical behaviors have negative impact firstly on cost as it affects

  3. Risk Pricing in Construction Tenders - How, Who, What

    Directory of Open Access Journals (Sweden)

    Marcus Tower

    2012-11-01

    Full Text Available Construction projects are most commonlyprocured in Australia by means of a traditionaldesign–tender–build model, whereby design islargely completed then contractors submittenders in a competitive environment.Construction contractors must consider riskswithin their tenders. This paper reports theresearch findings into pricing for risk incompetitive tenders by constructioncontractors. The research is based onstructured interviews with 10 contractingpersonnel; supplemented by 23 responses ofconstruction personnel from an online survey.Two common methods to price for risk are atrade-by-trade basis or an overall percentageor lump sum addition to the base estimate.Experience and intuition plays a significant rolein pricing for risk in tenders and the numberand type of people involved varies with projectsize, with greater involvement as project sizeincreases. The most significant risks priced intenders were: availability of resources; designor documentation errors; incomplete design;buildability issues; and inclement weather. Themost significant project factors considered bycontractors when pricing for risk in tenders are:value of liquidated damages; type ofcontract/procurement; completeness ofdocumentation; project complexity; and currentworkload. These risks and project factors areprimarily those over which the contractor haslimited or no control.

  4. Construction Tender Subcontract Selection using Case-based Reasoning

    Directory of Open Access Journals (Sweden)

    Due Luu

    2012-11-01

    Full Text Available Obtaining competitive quotations from suitably qualified subcontractors at tender tim n significantly increase the chance of w1nmng a construction project. Amidst an increasingly growing trend to subcontracting in Australia, selecting appropriate subcontractors for a construction project can be a daunting task requiring the analysis of complex and dynamic criteria such as past performance, suitable experience, track record of competitive pricing, financial stability and so on. Subcontractor selection is plagued with uncertainty and vagueness and these conditions are difficul_t o represent in generalised sets of rules. DeciSIOns pertaining to the selection of subcontr:act?s tender time are usually based on the mtu1t1onand past experience of construction estimators. Case-based reasoning (CBR may be an appropriate method of addressing the chal_lenges of selecting subcontractors because CBR 1s able to harness the experiential knowledge of practitioners. This paper reviews the practicality and suitability of a CBR approach for subcontractor tender selection through the development of a prototype CBR procurement advisory system. In this system, subcontractor selection cases are represented by a set of attributes elicited from experienced construction estimators. The results indicate that CBR can enhance the appropriateness of the selection of subcontractors for construction projects.

  5. Danish Public Construction Counselling Selection and Assignment Criteria in European Tendering

    DEFF Research Database (Denmark)

    Larsen, Jesper Kranker; Ussing, Lene Faber; Brunø, Thomas Ditlev

    2014-01-01

    One of the largest customers in the Danish construction industry is public agencies that own and develop projects. For some of the counselling services, they recur to be put out in European tendering. The aim is to find which selection and assignment criteria are used most in public tendering. How...... projects use selection and assignment criteria for counselling services and finally if there is significant use of selection and assignment methods in public counselling. The method is based on 74 public counselling tenders from the European Tenders Electronic Daily database from January 2010 to March 2013...

  6. Criteria procedure development for tender in construction design

    Directory of Open Access Journals (Sweden)

    Malykha Galina Gennad’evna

    Full Text Available This article deals with the problem of criteria optimization in order to objectively evaluate the experience of an applicant (a project organization and the quality of a design product (project documentation. The methodology to be developed is based on introduction of new evaluation criteria (sub-criteria that in conjunction with the applicable criteria specified by the Law on the Contract System will allow developing the optimal procedure to evaluate competitive bids of the participants in tenders and determining the most appropriate candidate, with whom the contract will be further concluded. The article analyzes the existing criteria and their interaction with each other and describes the specifics of tenders for design in the form of open competition. The list decreases to three criteria, such as "contract price", "quality, functional and environmental characteristics of a procurement facility", "qualification of procurement participants, including availability of financial resources, equipment and other material resources necessary for the execution of the contract material resources, the presence of goodwill, professionals and other employees of a certain experience level". However, in order to upgrade the quality of assurance procedures for the design works to be performed, it was decided to apply new evaluation criteria (sub-criteria components, such as "availability of positive findings of the state out-of-departmental examination that are similar to the subject of competition, on a participant in placement of order", "availability of the certificate on approval of architectural and urban planning decisions that are similar to the subject of competition, on a participant in placement of order", "availability of the permit for the commissioning of facilities that are similar to the subject of competition, on a participant in placement of order", "availability of the contract for designer's supervision with a participant in placement of

  7. Forecasting Construction Tender Price Index in Ghana using Autoregressive Integrated Moving Average with Exogenous Variables Model

    Directory of Open Access Journals (Sweden)

    Ernest Kissi

    2018-03-01

    Full Text Available Prices of construction resources keep on fluctuating due to unstable economic situations that have been experienced over the years. Clients knowledge of their financial commitments toward their intended project remains the basis for their final decision. The use of construction tender price index provides a realistic estimate at the early stage of the project. Tender price index (TPI is influenced by various economic factors, hence there are several statistical techniques that have been employed in forecasting. Some of these include regression, time series, vector error correction among others. However, in recent times the integrated modelling approach is gaining popularity due to its ability to give powerful predictive accuracy. Thus, in line with this assumption, the aim of this study is to apply autoregressive integrated moving average with exogenous variables (ARIMAX in modelling TPI. The results showed that ARIMAX model has a better predictive ability than the use of the single approach. The study further confirms the earlier position of previous research of the need to use the integrated model technique in forecasting TPI. This model will assist practitioners to forecast the future values of tender price index. Although the study focuses on the Ghanaian economy, the findings can be broadly applicable to other developing countries which share similar economic characteristics.

  8. Role expectations and agency in the audit tendering process

    NARCIS (Netherlands)

    Taminiau, Y.T.A.; Heusinkveld, H.S.

    2017-01-01

    Purpose – Tenders are generally considered an important in auditing research and practice, and are associated with significant difficulties for the auditing profession, as well as for individual auditors in the context of client relationships. The paper aims to explore the way auditors respond to

  9. Adapting Rational Unified Process (RUP) approach in designing a secure e-Tendering model

    Science.gov (United States)

    Mohd, Haslina; Robie, Muhammad Afdhal Muhammad; Baharom, Fauziah; Darus, Norida Muhd; Saip, Mohamed Ali; Yasin, Azman

    2016-08-01

    e-Tendering is an electronic processing of the tender document via internet and allow tenderer to publish, communicate, access, receive and submit all tender related information and documentation via internet. This study aims to design the e-Tendering system using Rational Unified Process approach. RUP provides a disciplined approach on how to assign tasks and responsibilities within the software development process. RUP has four phases that can assist researchers to adjust the requirements of various projects with different scope, problem and the size of projects. RUP is characterized as a use case driven, architecture centered, iterative and incremental process model. However the scope of this study only focusing on Inception and Elaboration phases as step to develop the model and perform only three of nine workflows (business modeling, requirements, analysis and design). RUP has a strong focus on documents and the activities in the inception and elaboration phases mainly concern the creation of diagrams and writing of textual descriptions. The UML notation and the software program, Star UML are used to support the design of e-Tendering. The e-Tendering design based on the RUP approach can contribute to e-Tendering developers and researchers in e-Tendering domain. In addition, this study also shows that the RUP is one of the best system development methodology that can be used as one of the research methodology in Software Engineering domain related to secured design of any observed application. This methodology has been tested in various studies in certain domains, such as in Simulation-based Decision Support, Security Requirement Engineering, Business Modeling and Secure System Requirement, and so forth. As a conclusion, these studies showed that the RUP one of a good research methodology that can be adapted in any Software Engineering (SE) research domain that required a few artifacts to be generated such as use case modeling, misuse case modeling, activity

  10. Effects of moisture enhancement, enzyme treatment, and blade tenderization on the processing characteristics and tenderness of beef semimembranosus steaks.

    Science.gov (United States)

    Pietrasik, Z; Shand, P J

    2011-05-01

    The individual and combined effects of moisture enhancement with a salt/phosphate solution (ME), blade tenderization (BT), and enzyme injection with proteinases derived from Aspergillus oryzae or Bacillus subtilis on cooking properties, Warner-Bratzler shear force (WBSF), and sensory characteristics of beef semimembranosus were investigated. ME significantly (P < 0.01) reduced WBSF and increased (P < 0.05) sensory scores for juiciness and tenderness. BT increased (P < 0.05) initial and overall tenderness scores and made connective tissue less perceptible. BT combined with ME resulted in the highest initial and overall tenderness scores, however, combining ME with either proteinase was as effective for reducing WBSF and increasing tenderness, particularly at 20 (vs. 10) ppm enzyme inclusion. Tenderness of enzyme-injected steaks was increased without compromising other palatability attributes. All treatments increased the frequency of steaks rated slightly tender or higher, with the ME+BT combination, or ME with inclusion of 20 ppm of either proteinase, being most effective. Copyright © 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

  11. Price Determinants of the Tendering Process for Pharmaceuticals in the Cyprus Market.

    Science.gov (United States)

    Petrou, Panagiotis; Talias, Michael A

    2015-09-01

    Tendering has been a promising approach for procuring pharmaceuticals. Significant price reductions have been well documented by several authors. To our knowledge, there are limited data detailing the impact of variables in the tendering process. In this article, our objective was to evaluate the impact of potentially exploratory variables, which included innovation status, total value and volume of sales of each product, health care setting administration (hospital/outpatient), patent status (branded/generic), tendering type, and wholesale price, on price reduction in the tendering process. Financial data of public sector sales during 2011 were analyzed. On the basis of these data, we selected 178 medicines with corresponding sales of €49 million, out of a total market value of €104 million. Medicines were selected according to volume, value, and therapeutic value across all therapeutic areas. We performed a beta regression for the assessment of impact of variables and applied the same methodology to different subgroups. The generic status of medicines is statistically significantly associated with a higher price reduction. Tendering type by alternative, high wholesale prices, and high volume are robust estimators for price reduction. Innovation status does not have any effect on price reduction. Outpatient medicines reach lower prices as compared with hospital medicines. A rather unexpected finding is the negative correlation of high sales value with price reduction. These findings will lead to better understanding of the tendering framework, enabling us to further evolve its operational capacity, aiming to generate more savings. Moreover, our study indicates areas in which a more optimized approach is needed. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  12. Public-Private partnership procurement: Game-theoretic studies of the tender process.

    OpenAIRE

    De Clerck, Dennis

    2015-01-01

    A Public-private partnership (PPP) is a settlement between a public party and a contractor or private sector consortium to engage in a long-term contractual agreement for designing, building, operating and/or maintaining capital intensive projects, while trying to attain value for money. PPPs are globally gaining importance in the construction industry. The risk transfer from the contracting government towards the private entity has important repercussions on the tender. Contractors need to c...

  13. The transformation of the tender evaluation process in public procurement in Poland

    Science.gov (United States)

    Plebankiewicz, E.; Kozik, R.

    2017-10-01

    Procedures regarding the evaluation of tenders have been changed since the public procurement law was enacted (it came into force in January 1, 1995). The contracting authority could apply both the criteria related to the qualities of the contractor and those related to the to the subject - matter of public contract. Two extensive amendments in 2001 and a government project introduced vital regulations and excluded the possibility of applying criteria related to the qualities of the contractor. Act of 29 January 2004 Public Procurement Law allowed to use price as the sole contract award criterion. The changes in the Law in 2014 restricted that possibility to the situation in which the subject matter of a contract is commonly available and has established quality standards. The Act of 22 June 2016 amending the Public Procurement Law Act and some other laws introduced the new criteria list and limited the importance of the price criterion in the certain situations. Instead of price, the cost can also be a criterion for tender evaluation. The cost criterion can be determined using life cycle costing. In the paper, based on contract notices of open tendering published in the Public Procurement Bulletin, the criteria of construction contract selection will be analysed. In particular the effectiveness of changes in the Procurement Law will be researched.

  14. Indicators of a Flowless Construction process

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten; Bonke, Sten

    2012-01-01

    to the questionnaire. Processing of data and information from questionnaires has been carried out using different statistical and analytical methods. Focus has been on the number and graduation of seriousness of defects, on type of tender and organization of the construction process, on the type of client...... construction processes characterized by few or no defects compared to those with many serious defects. The planning of budgetary conditions, time schedules, and an early and continuous defects control proved to have the most significant influence on the final results related to defects in the building......This paper is reviewing an ongoing research project which has two central aims. Firstly, to identify and analyse indicators of central importance to a successful construction process in the perspective of handing-over flawless buildings to clients. Secondly, from this knowledge, to deduce methods...

  15. The beef tenderness model

    African Journals Online (AJOL)

    Kedibone KY. Modika

    2015-07-29

    Jul 29, 2015 ... The concept of meat tenderness is very complex and is biologically .... of feed additives (β-agonists) so that the animals can be harvested at a younger ...... in the rearing and processing of experimental animals and carcasses.

  16. Pulsed electric field processing of functional drink based on tender coconut water (Cococus nucifera L. - nannari (Hemidesmus indicus blended beverage

    Directory of Open Access Journals (Sweden)

    R. Kumar

    2014-01-01

    Full Text Available Tender coconut water (Cocos nucifera L. Nannari extract (Hemidesmus indicus L. ready-to serve (RTS blended beverage were optimised. Response Surface Methodology (RSM was employed to optimize the levels of independent variables (levels of tender coconut water, nannari extract and sugar. The responses of pH, ºBrix, CIE colour (L*, a* and b* value and OAA were studied. The data obtained were analysed by multiple regression technique to generate suitable mathematical models. The developed blended beverage was processed using pulsed electric field (PEF with electric field 31.2 kV/cm, 20 pulse widths at 100 Hz frequency to minimise nutritional and sensory attributes losses and compared with conventional thermal pasteurization (96 ºC for 360 s with p-value of 8.03. Thermal pasteurization showed a significant (p<0.05 decrease in colour value, radical scavenging activity and overall acceptability after treatment and also during storage, when compared to PEF treated tender coconut water-nannari blended beverage. PEF treatment also achieved a 3.01 ± 0.69 log inactivation, similar to thermal pasteurization of native micro flora. PEF treated tender coconut water-nannari blended beverage was stable up to 120 days under ambient storage condition (27-30 °C.

  17. Constructive Consumer Choice Processes.

    OpenAIRE

    Bettman, James R; Luce, Mary Frances; Payne, John W

    1998-01-01

    Consumer decision making has been a focal interest in consumer research, and consideration of current marketplace trends ( e.g., technological change, an information explosion) indicates that this topic will continue to be critically important. We argue that consumer choice is inherently constructive. Due to limited processing capacity, consumers often do not have well-defined existing preferences, but construct them using a variety of strategies contingent on task demands. After describing c...

  18. The Impact of the Choice of Evaluation Criteria and the Type of Tender on the Awarding Public Contracts (in the Case of Construction Contracts at the Local Level in the Czech Republic

    Directory of Open Access Journals (Sweden)

    František Ochrana

    2015-01-01

    Full Text Available Public procurement may be examined from different perspectives. Using the Czech Republic as an example, this study is devoted to examining the impact of decisions made by the contracting authority regarding a public tender on the tender process itself and on the outcomes of the tender. The contracting authority addresses a number of decision-making issues regarding public procurements. For example, it needs to decide between two types of criteria (choosing between a single-criterion evaluation or rather opting for several evaluation criteria. At the same time, the authority is free to choose among different types of award procedures while adhering to certain restrictions imposed by the Act on Public Contracts. Using a sample of 1,027 construction work contracts awarded in the Czech Republic, the study examines, in more detail, the impacts of individual choices made by the contracting authority (namely the type of evaluation criteria chosen and the type of procedure for awarding contracts on the estimated and final price of public contracts. Recommendations on how to streamline the process of public procurement can be drawn from conclusions from the empirical analysis.

  19. A construction process model for implementing constructability in construction

    NARCIS (Netherlands)

    Langkemper, J.; Al-Jibouri, S.; Reymen, I.M.M.J.; Maas, G.J.; Gassel, van F.

    2003-01-01

    In construction, failure of design professionals to consider how a builder will implement the design can result in scheduling problems, cost escalation, delays and disputes during the construction process. The integration of construction knowledge and experience during planning and design is termed

  20. Plant X-tender: An extension of the AssemblX system for the assembly and expression of multigene constructs in plants

    Science.gov (United States)

    Machens, Fabian; Coll, Anna; Baebler, Špela; Messerschmidt, Katrin; Gruden, Kristina

    2018-01-01

    Cloning multiple DNA fragments for delivery of several genes of interest into the plant genome is one of the main technological challenges in plant synthetic biology. Despite several modular assembly methods developed in recent years, the plant biotechnology community has not widely adopted them yet, probably due to the lack of appropriate vectors and software tools. Here we present Plant X-tender, an extension of the highly efficient, scar-free and sequence-independent multigene assembly strategy AssemblX, based on overlap-depended cloning methods and rare-cutting restriction enzymes. Plant X-tender consists of a set of plant expression vectors and the protocols for most efficient cloning into the novel vector set needed for plant expression and thus introduces advantages of AssemblX into plant synthetic biology. The novel vector set covers different backbones and selection markers to allow full design flexibility. We have included ccdB counterselection, thereby allowing the transfer of multigene constructs into the novel vector set in a straightforward and highly efficient way. Vectors are available as empty backbones and are fully flexible regarding the orientation of expression cassettes and addition of linkers between them, if required. We optimised the assembly and subcloning protocol by testing different scar-less assembly approaches: the noncommercial SLiCE and TAR methods and the commercial Gibson assembly and NEBuilder HiFi DNA assembly kits. Plant X-tender was applicable even in combination with low efficient homemade chemically competent or electrocompetent Escherichia coli. We have further validated the developed procedure for plant protein expression by cloning two cassettes into the newly developed vectors and subsequently transferred them to Nicotiana benthamiana in a transient expression setup. Thereby we show that multigene constructs can be delivered into plant cells in a streamlined and highly efficient way. Our results will support faster

  1. Plant X-tender: An extension of the AssemblX system for the assembly and expression of multigene constructs in plants.

    Science.gov (United States)

    Lukan, Tjaša; Machens, Fabian; Coll, Anna; Baebler, Špela; Messerschmidt, Katrin; Gruden, Kristina

    2018-01-01

    Cloning multiple DNA fragments for delivery of several genes of interest into the plant genome is one of the main technological challenges in plant synthetic biology. Despite several modular assembly methods developed in recent years, the plant biotechnology community has not widely adopted them yet, probably due to the lack of appropriate vectors and software tools. Here we present Plant X-tender, an extension of the highly efficient, scar-free and sequence-independent multigene assembly strategy AssemblX, based on overlap-depended cloning methods and rare-cutting restriction enzymes. Plant X-tender consists of a set of plant expression vectors and the protocols for most efficient cloning into the novel vector set needed for plant expression and thus introduces advantages of AssemblX into plant synthetic biology. The novel vector set covers different backbones and selection markers to allow full design flexibility. We have included ccdB counterselection, thereby allowing the transfer of multigene constructs into the novel vector set in a straightforward and highly efficient way. Vectors are available as empty backbones and are fully flexible regarding the orientation of expression cassettes and addition of linkers between them, if required. We optimised the assembly and subcloning protocol by testing different scar-less assembly approaches: the noncommercial SLiCE and TAR methods and the commercial Gibson assembly and NEBuilder HiFi DNA assembly kits. Plant X-tender was applicable even in combination with low efficient homemade chemically competent or electrocompetent Escherichia coli. We have further validated the developed procedure for plant protein expression by cloning two cassettes into the newly developed vectors and subsequently transferred them to Nicotiana benthamiana in a transient expression setup. Thereby we show that multigene constructs can be delivered into plant cells in a streamlined and highly efficient way. Our results will support faster

  2. Formalized description of assessment procedures of tender offers (of the construction organizer and contracting companies in case of engineering control scheme

    Directory of Open Access Journals (Sweden)

    Sborshchikov Sergey Borisovich

    2016-10-01

    Full Text Available The procedure of evaluating and selecting tender offers is not only an important element of the control system of investment and construction activity but is also an effective tool to increase its efficiency due to optimization of construction works price, reduction of their duration, stimulating innovations in the production, increasing the quality and engineering safety of construction production. At the recent time when new organizational forms and control schemes of investment and construction activity are appearing the system of competitive bidding gains more importance and new functions, because the choice of construction organizer and contracting companies directly influences the results of the construction. The authors consider the task of selecting the bidders’ offers which is a multicriterion task. The offers are evaluated according to the set of parameters reflecting the effectiveness of investment and construction projects. The criteria selection is based on the fact that the proposals of the organizer of construction and the contractors are related to the cost of works and to the deadlines which directly affects the implementation parameters of investment and construction projects.

  3. BPMN process views construction

    NARCIS (Netherlands)

    Yongchareon, S.; Liu, Chengfei; Zhao, X.; Kowalkiewicz, M.; Kitagawa, H.; Ishikawa, Y.

    2010-01-01

    Process view technology is catching more attentions in modern business process management, as it enables the customisation of business process representation. This capability helps improve the privacy protection, authority control, flexible display, etc., in business process modelling. One of

  4. CRITICAL EVENTS IN CONSTRUCTION PROCESS

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten; Rasmussen, Grane Mikael Gregaard

    2009-01-01

    cause-effects of failures and defects in the construction industry by using an analytical approach (The bowtie model) which is developed in the accident research. Using this model clarifies the relationships within the chain of failures that causes critical events with undesirable consequences......Function failures, defects and poor communication are major problems in the construction industry. These failures and defects are caused by a row of critical events in the construction process. The purpose of this paper is to define “critical events” in the construction process and to investigate....... In this way the causes of failures and the relationships between various failures are rendered visible. A large construction site was observed from start to finish as the empirical element in the research. The research focuses on all kinds of critical events identified throughout every phase during...

  5. An analysis of project selection and assignment criteria of Danish tenders in Europe

    Directory of Open Access Journals (Sweden)

    Jasper Kranker Larsen

    2013-12-01

    Full Text Available Public construction agencies are one of the largest developers within the Danish construction industry, where such agencies own and develop new public construction projects. Most of these projects are put out in European tender. This study analyses the selection and assignment criteria employed by these agencies in different types of public sector projects. Some of the objectives pursued by the study include the determination of 1/ the selection and assignment criteria mostly used in Danish public tenders 2/ how different types of projects use selection and assignment criteria in the bidding process, and 3/ any significant difference between the use of selection and assignment criteria in Danish public construction projects. The study uses a quantitative research approach where 157 Danish public tender cases were selected from the European Tenders Electronic Daily database between the period: January 2010 to March 2013. Fisher's Exact Test was conducted to determine if there was any significant use of some selection and assignment criteria. The findings of the study showed that invited tenders with pre-qualification and lowest price in 69.8% of the tenders are the most used selection and assignment criteria, with little regard to project type.

  6. Defining Abnormally Low Tenders

    DEFF Research Database (Denmark)

    Ølykke, Grith Skovgaard; Nyström, Johan

    2017-01-01

    The concept of an abnormally low tender is not defined in EU public procurement law. This article takes an interdisciplinary law and economics approach to examine a dataset consisting of Swedish and Danish judgments and verdicts concerning the concept of an abnormally low tender. The purpose...

  7. Constructive processes in person cognition.

    Science.gov (United States)

    Fiedler, K

    1993-12-01

    The notion of constructive memory processes is imported from research on eyewitness memory to the area of social cognition. Mere questioning about the applicability of personality attributes to a target person is shown to affect subsequent memory-based judgements of that person. These constructive influences are to be distinguished, conceptually, from the global notion of priming effects. In Expt 1, the target person was first described as an extravert; afterwards, subjects had to indicate whether either desirable aspects of extraversion (self-confidence) or undesirable aspects (exhibitionism) apply to the target or not. Mere questioning resulted in a congruent judgment bias towards the questioned attributes that did not generalize to a global halo effect. Experiment 2 replicated the basic finding and demonstrated that this phenomenon is independent of a generation effect (i.e. the memory advantage of self-generated inferences). These results are interpreted in terms of (a) a reframing of the categorical distribution representing the information about the target person in memory and (b) a regressive tendency to assume intermediate default values rather than extreme values for questioned attributes under uncertainty. Alternative explanations in terms of demand effects or a conformation bias cannot provide sufficient accounts. The relevance of constructive processes to understanding self-fulfilling prophecies and other phenomena in social interaction is discussed.

  8. Production and processing studies on calpain-system gene markers for tenderness in Brahman cattle: 2. Objective meat quality.

    Science.gov (United States)

    Cafe, L M; McIntyre, B L; Robinson, D L; Geesink, G H; Barendse, W; Pethick, D W; Thompson, J M; Greenwood, P L

    2010-09-01

    Effects and interactions of calpain-system tenderness gene markers on objective meat quality traits of Brahman (Bos indicus) cattle were quantified within 2 concurrent experiments at different locations. Cattle were selected for study from commercial and research herds at weaning based on their genotype for calpastatin (CAST) and calpain 3 (CAPN3) gene markers for beef tenderness. Gene marker status for mu-calpain (CAPN1-4751 and CAPN1-316) was also determined for inclusion in statistical analyses. Eighty-two heifer and 82 castrated male cattle with 0 or 2 favorable alleles for CAST and CAPN3 were studied in New South Wales (NSW), and 143 castrated male cattle with 0, 1, or 2 favorable alleles for CAST and CAPN3 were studied in Western Australia (WA). The cattle were backgrounded for 6 to 8 mo and grain-fed for 117 d (NSW) or 80 d (WA) before slaughter. One-half the cattle in each experiment were implanted with a hormonal growth promotant during feedlotting. One side of each carcass was suspended from the Achilles tendon (AT) and the other from the pelvis (tenderstretch). The M. longissimus lumborum from both sides and the M. semitendinosus from the AT side were collected; then samples of each were aged at 1 degrees C for 1 or 7 d. Favorable alleles for one or more markers reduced shear force, with little effect on other meat quality traits. The size of effects of individual markers varied with site, muscle, method of carcass suspension, and aging period. Individual marker effects were additive as evident in cattle with 4 favorable alleles for CAST and CAPN3 markers, which had shear force reductions of 12.2 N (P 0.05) of interactions between the gene markers, or between the hormonal growth promotant and gene markers for any meat quality traits. This study provides further evidence that selection based on the CAST or CAPN3 gene markers improves meat tenderness in Brahman cattle, with little if any detrimental effects on other meat quality traits. The CAPN1-4751 gene

  9. Automatizovani sistem podrške odlučivanju u procesima javne nabavke / Automatic automatic decision support in a tender process

    Directory of Open Access Journals (Sweden)

    Siniša Borović

    2004-01-01

    Full Text Available U poslednjoj fazi procesa javne nabavke komisija se susreće sa problemom izbora naboljeg ponuđača, odnosno onog čija ponuda u najvećoj meri ispunjava zahteve i uslove koji su navedeni u konkursnoj dokumentaciji. Mora se doneti odluka uz uvažavanje više različitih, a često i protivrečnih kriterijuma. Za rešavanje ovakvih i sličnih problema razvijen je čitav niz metoda koje pripadaju oblasti višekriterijumske analize i rangiranja. Uzimajući u obzir karakteristike problema izbora ponuđača u procesu javne nabavke, iz skupa navedenih metoda izdvojena je metoda analitičkih hijerarhijskih procesa (AHP, kao osnovna metoda za rangiranje ponuđača. Za eventualnu kontrolu izvršenog rangiranja predlaže se familija metoda PROMETHEE I-II. / In the last phase of a tender process, the Commission has a problem with choosing the best bidder, i.e. the one whose offer meets the highest requirements in the Tender documentation. A decision has to be made taking into account many different, and very often contradictory, criteria. For solving this one as well as similar problems, numerous methods, belonging to the multicriteria analysis and ranking, are developed. Taking in to account the characteristics of a problem imposed by choosing the bidder in a Tender process, one of the mentioned methods, the method of analytical hierarchy process (AHP has been chosen as a basic method for ranking bidders. For the performed ranking control, the PROMETHEE I-II, method family is proposed.

  10. Managing meat tenderness.

    Science.gov (United States)

    Thompson, John

    2002-11-01

    This paper discusses the management of meat tenderness using a carcass grading scheme which utilizes the concept of total quality management of those factors which impact on beef palatability. The scheme called Meat Standards Australia (MSA) has identified the Critical Control Points (CCPs) from the production, pre-slaughter, processing and value adding sectors of the beef supply chain and quantified their relative importance using large-scale consumer testing. These CCPs have been used to manage beef palatability in two ways. Firstly, CCPs from the pre-slaughter and processing sectors have been used as mandatory criteria for carcasses to be graded. Secondly, other CCPs from the production and processing sectors have been incorporated into a model to predict palatability for individual muscles. The evidence for the importance of CCPs from the production (breed, growth path and HGP implants), pre-slaughter and processing (pH/temperature window, alternative carcass suspension, marbling and ageing) sectors are reviewed and the accuracy of the model to predict palatability for specific muscle×cooking techniques is presented.

  11. Design Processes and Constructive Ergonomics

    DEFF Research Database (Denmark)

    Broberg, Ole

    2015-01-01

    This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, ...

  12. Design Processes and Constructive Ergonomics

    OpenAIRE

    Broberg, Ole

    2015-01-01

    This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, many challenges are to be overcome. They relate among others to education and training of ergonomist, and the cultural and institutional setting of ergonomics in specific countries.

  13. Assessment of Computer Software Usage for Estimating and Tender ...

    African Journals Online (AJOL)

    It has been discovered that there are limitations to the use of computer software packages in construction operations especially estimating and tender analysis. The objectives of this research is to evaluate the level of computer software usage for estimating and tender analysis while also assessing the challenges faced by ...

  14. Construction Analysis during the Design Process

    NARCIS (Netherlands)

    Vries, de B.; Harink, J.M.J.; Martens, B.; Brown, A.

    2005-01-01

    4D CAD systems are used by contractors for visually checking the construction process. To enable simulation of the construction process, the construction planner links building components from a CAD model with the activities from a project planning. In this paper we describe a method to generate a

  15. Military Construction: Process and Outcomes

    Science.gov (United States)

    2016-12-14

    barracks, schools, hospitals, child development centers, and other facilities needed to support U.S. military forces at home and overseas. This military...and programming into the President’s budget could take three or more years. Furthermore, it is important to note that only those projects that have...travel, fuel, minor construction projects of $1M or less, training and education , and depot maintenance, and base operations support. O&M

  16. Extraterrestrial materials processing and construction

    Science.gov (United States)

    Criswell, D. R.

    1978-01-01

    Applications of available terrestrial skills to the gathering of lunar materials and the processing of raw lunar materials into industrial feed stock were investigated. The literature on lunar soils and rocks was reviewed and the chemical processes by which major oxides and chemical elements can be extracted were identified. The gathering of lunar soil by means of excavation equipment was studied in terms of terrestrial experience with strip mining operations on earth. The application of electrostatic benefication techniques was examined for use on the moon to minimize the quantity of materials requiring surface transport and to optimize the stream of raw materials to be transported off the moon for subsequent industrial use.

  17. Italian water service's competitive tendering: does any tender design exist?

    International Nuclear Information System (INIS)

    Antonioli, B.

    2006-01-01

    During the last two decades, the procurement of public services has been engaged a process of intensive change, both at the local and national level, particularly in Europe. In Italy, recent developments of legislative framework are aimed to adopt competitive tenders both for service's concession or private partner selection. Economists and operators generally agree about the effectiveness of auctions for the concession's contracting out. Otherwise, the agreement is weaker if the question is how to prepare the auction: bidding market a la Demsetz, beauty contests or hybrid forms? In other words, more attention should be devoted to the analysis of reference market and to auction's design. The aim of this paper is to verify, starting from the analysis of auction realized between 1998 and 2005, the real designing of the auctions other than the presence of an idea of industrial policy for water services. Results highlights that tenders are few, poorly designed and scarcely effective. To be more precise, results remark the lack of foresight of industrial policy and, more generally, the necessity to reflect on the real possibility of the competition for thc market in the water sector, characterized by an high degree of economical and social complexity [it

  18. Tendering specification and contracting

    International Nuclear Information System (INIS)

    Koch, E. von

    1975-01-01

    The lecture tendering, specification and contracting is prepared in two parts: This first part deals with technical aspects while part two features the commercial and legal situation in the partnership of two: the supplier of the fuel bundles and the utility. In this lecture a look is given on the way how a supplier can offer its fuel and some certain points are mentioned which are important to compare the bid of one competitor to the other. The major points are summarized which are or at least should be in an offer so as to find out which offer is the best. (orig./FW) [de

  19. The co-constructive processes in physiotherapy

    OpenAIRE

    Areskoug Josefsson, Kristina; Andersson, Ann-Christine

    2017-01-01

    To employ a person-centred approach, it is essential to work with the patient in deciding the important issues that the physiotherapy intervention should target, and to develop and adjust the individual treatment accordingly. Those co-constructive processes of physiotherapy consist of several parts, aiming to improve patient involvement and to optimize intervention outcomes. This paper aims to discuss and bring forward the role of the co-constructive processes in physiotherapy, by using persp...

  20. Leveraging Lean in construction: A case study of a BIM-based HVAC manufacturing process

    Directory of Open Access Journals (Sweden)

    Colin J. Conway

    2014-12-01

    Full Text Available The impetus towards efficiency in the AECO (Architecture, Engineering, Construction & Operations sector is driving the implementation of Lean practices. BIM technologies and BIM processes provide methods by which this can be achieved. Major clients of building services contractors have begun to mandate the use of BIM and some are using BIM preparedness/experience as pre-tender qualification criteria. In this case study, an initial review has been conducted of the achievements of a major Irish M&E contractor in implementing BIM. The firm purpose-built a facility for the off-site manufacture of building services components. The operations of the plant are efficient and quality assured through the use of an appropriately skilled workforce at all stages of manufacture, and tracking software that has developed as the knowledge of the contractor grew. Standardised processes have been developed which have resulted in greater efficiencies and lower costs for the contractor as a result of fewer requirements for onsite modifications (such as those caused by clashes, less waste, and greater flexibility. Despite some initial objections, the employees of the company are now more satisfied with their working conditions and are, as a result, more productive. Through investment in BIM-based, Lean processes, the contractor can now better compete when tendering for large-scale projects in Ireland and worldwide, including the rapidly-increasing number where BIM experience and preparedness is mandated.

  1. Combined effect of electrical stimulation and blade tenderization on some bovine muscles

    Energy Technology Data Exchange (ETDEWEB)

    Raccach, M.; Henrickson, R.L.

    1979-01-01

    The electrical stimulation (ES) period was a very important factor determining the tenderness of three bovine muscles: Biceps femoris (BF), Longissimus dorsi (LD), and Semimembranosus (SM). Tenderness (shear force values) increased in most cases with increasing the ES period. An ES period of 15 min was optimal for obtaining a tenderness equal to that obtained by conventional processing of beef. The shortest ES period used (1 min) was adequate in most cases to set the muscles in rigor mortis and in preventing cold shortening. The tenderness of blade tenderized muscles was in most cases independent from the ES period. Blade tenderization was very effective to tenderize the BF muscle followed in decreasing order of efficacy by the LD and SM muscles. The cooking times and cooking losses of the three muscles were not affected by either the ES period or by blade tenderization.

  2. Microbiological safety of tenderized, proteinaceous, semi-processed and processed food prepared from poultry treated with ionizing radiation and other processes

    International Nuclear Information System (INIS)

    Klinger, I.; Lapidot, M.

    1998-01-01

    From a microbiological point of view, poultry meat is considered to be one of the most contaminated raw foods, harbouring bacteria, including pathogens such as Salmonella spp., Staphylococcus aureus, Listeria monocytogenes and Campylobacter spp. Some of these pathogens can survive the heat treatment used during the further processing of poultry meat into ready to eat products such as sausages and patties, and thus endanger consumer health, particularly in the young, the elderly and the immunocompromised. L. monocytogenes is of particular concern. This Gram positive, non-spore forming, psychrotrophic pathogen has been recognized as one of the causes of a severe food borne illness. The organism is relatively heat stable and can multiply under refrigeration conditions, but is sensitive to ionizing radiation. A survey conducted in Israel demonstrated that raw poultry meat was heavily contaminated with L. monocytogenes and that the pathogen could also be recovered from ready to eat poultry products. It was proposed that treatment of the raw meat with ionizing radiation prior to heating and use of the hazard analysis critical control point concept in the further processing plant would result in the elimination of contamination in ready to eat products. (author)

  3. Process for constructing a gamma thermometer

    International Nuclear Information System (INIS)

    Barbet, M.J.P.; Cohen, B.S.; Robillard, M.

    1982-01-01

    A process is described for constructing a gamma thermometer having a substance absorbing the radiation and a set of thermocouples for measuring the local power in a fuel assembly of a nuclear reactor. A claim is particularly made for the preparation of the tube containing it and for its filling with an inert gas [fr

  4. Gaussian processes and constructive scalar field theory

    International Nuclear Information System (INIS)

    Benfatto, G.; Nicolo, F.

    1981-01-01

    The last years have seen a very deep progress of constructive euclidean field theory, with many implications in the area of the random fields theory. The authors discuss an approach to super-renormalizable scalar field theories, which puts in particular evidence the connections with the theory of the Gaussian processes associated to the elliptic operators. The paper consists of two parts. Part I treats some problems in the theory of Gaussian processes which arise in the approach to the PHI 3 4 theory. Part II is devoted to the discussion of the ultraviolet stability in the PHI 3 4 theory. (Auth.)

  5. Improvement of Construction Project Management Processes

    Directory of Open Access Journals (Sweden)

    Nazarko, J.

    2017-07-01

    Full Text Available The common denominator of the five papers published in the current edition of the Journal of Engineering, Project, and Production Management is the improvement of construction project management processes for effective use of resources. Execution of proper project management processes is widely recognized as a key success factor influencing likelihood of project success (Alleman, 2014. It is noticeable that four out of five papers in this issue of the Journal are authored or co-authored by Iranian researchers from the same Institute but their conclusions bear importance that cannot be limited to the authors’ region.

  6. Construction apparatus for thermochemical hydrogen production process

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, S.; Nakajima, H.; Higashi, S.; Onuki, K.; Akino, S.S.N. [Japan Atomic Energy Research Inst., Ibaraki-ken (Japan). Nuclear Heat Utilization Engineering Lab

    2001-06-01

    Studies have been carried out at the Japan Atomic Energy Research Institute (JAERI) on hydrogen production through thermochemical processes such as water-splitting. These studies are classified with iodine-sulphur cycle studies using heat from high temperature gas-cooled reactors. An experimental apparatus was constructed with fluorine resin, glass and quartz. It can produce hydrogen at a rate of 50 litres per hour. Electricity provides the heat required for the operation. The closed chemical process requires special control techniques. The process flow diagram for the apparatus was designed based on the results of previous studies including one where hydrogen production was successfully achieved at a rate of one liter per hour for 48 hours. Experimental operations under atmospheric pressure will be carried out for the next four years to develop the process. The data will be used in the next research and development programs aimed at designing a bench-scale apparatus. 7 refs., 1 tab., 8 figs.

  7. Simulation of the honeycomb construction process

    International Nuclear Information System (INIS)

    Zhang Yuanzhang

    2010-01-01

    The construction process of the honeycomb by bees is an astonishing process. The original structure which the bees built is nothing more than a lot of rough cylinders. But keeping the beeswax semi-flow for a certain time, those rough structures become perfect hexahedral columns. A modified, simplified particle method was used here to simulate the semi-flow state of the material. Although the parameters used here were still rather subjective, the simulation still could demonstrate some behavior of that sort of material like beeswax. And the method that the bees used to build their honey comb, could be an efficient method to imitate when we are trying to manufacture cellular materials.

  8. An analysis of project selection and assignment criteria of danish tenders in europe

    DEFF Research Database (Denmark)

    Larsen, Jesper Kranker; Ussing, Lene Faber; Brunø, Thomas Ditlev

    2013-01-01

    , and 3/ any significant difference between the use of selection and assignment criteria in Danish public construction projects. The study uses a quantitative research approach where 157 Danish public tender cases were selected from the European Tenders Electronic Daily database between the period...

  9. Innovation in Construction: Learning Processes in implementing new Technologies

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is concerned with the question: How do construction firms implement new technology on construction projects? A model of the implementation process is presented based on a review of the construction innovation literature, innovation theory, and organisational learning theories....

  10. Involving construction in the preliminary engineering process

    International Nuclear Information System (INIS)

    Mahoney, D.T. Jr.; Boccieri, S.V. Jr.

    1994-01-01

    With today's high cost associated with modifications in nuclear power plants, it is imperative that the authors continue to investigate ways to cut costs but at the same time improve efficiency and reduce radiation exposure to those directly associated with the implementation of modifications. The success associated with involving construction in the preliminary engineering process will not only cut costs and improve efficiency but will establish a Team Building concept to provide accountability to all those associated with the implementation of the task. This form of partnering focuses on the solutions rather than highlighting the difficulties. This paper will demonstrate techniques to implement such ideas and provide examples to corroborate actual successes already achieved

  11. Process-Based Modeling of Constructed Wetlands

    Science.gov (United States)

    Baechler, S.; Brovelli, A.; Rossi, L.; Barry, D. A.

    2007-12-01

    Constructed wetlands (CWs) are widespread facilities for wastewater treatment. In subsurface flow wetlands, contaminated wastewater flows through a porous matrix, where oxidation and detoxification phenomena occur. Despite the large number of working CWs, system design and optimization are still mainly based upon empirical equations or simplified first-order kinetics. This results from an incomplete understanding of the system functioning, and may in turn hinder the performance and effectiveness of the treatment process. As a result, CWs are often considered not suitable to meet high water quality-standards, or to treat water contaminated with recalcitrant anthropogenic contaminants. To date, only a limited number of detailed numerical models have been developed and successfully applied to simulate constructed wetland behavior. Among these, one of the most complete and powerful is CW2D, which is based on Hydrus2D. The aim of this work is to develop a comprehensive simulator tailored to model the functioning of horizontal flow constructed wetlands and in turn provide a reliable design and optimization tool. The model is based upon PHWAT, a general reactive transport code for saturated flow. PHWAT couples MODFLOW, MT3DMS and PHREEQC-2 using an operator-splitting approach. The use of PHREEQC to simulate reactions allows great flexibility in simulating biogeochemical processes. The biogeochemical reaction network is similar to that of CW2D, and is based on the Activated Sludge Model (ASM). Kinetic oxidation of carbon sources and nutrient transformations (nitrogen and phosphorous primarily) are modeled via Monod-type kinetic equations. Oxygen dissolution is accounted for via a first-order mass-transfer equation. While the ASM model only includes a limited number of kinetic equations, the new simulator permits incorporation of an unlimited number of both kinetic and equilibrium reactions. Changes in pH, redox potential and surface reactions can be easily incorporated

  12. Pacific Fleet Submarine Tender Optimization

    Science.gov (United States)

    2013-06-01

    worker(s) waits at DG Tender travel (FCB = USS Frank Cable, ESL = USS Emory S. Land) Day 1 FCB waits at GUAM Day 1 ESL ...Day 5 FCB waits at GUAM Day 6 FCB waits at GUAM Day 6 ESL waits at SINGAPORE Day 7 FCB waits...at GUAM Day 7 ESL waits at SINGAPORE Day 8 FCB waits at GUAM Day 8 ESL waits at SINGAPORE Day 9

  13. Construction process assessment or 'Black Box Opener'

    NARCIS (Netherlands)

    Abarca Guerrero, L.; Scheublin, F.J.M.; Lambert, A.J.D.; Durmicevic, E.

    2009-01-01

    The construction industry and related ones are considered the world’s largest industrial employer and natural resources consumer. 50% of all materials extracted from the earth are transformed into construction materials and products. When these materials enter the waste stream, they account for some

  14. The Process of Student Cognition in Constructing Mathematical Conjecture

    Science.gov (United States)

    Astawa, I. Wayan Puja; Budayasa, I. Ketut; Juniati, Dwi

    2018-01-01

    This research aims to describe the process of student cognition in constructing mathematical conjecture. Many researchers have studied this process but without giving a detailed explanation of how students understand the information to construct a mathematical conjecture. The researchers focus their analysis on how to construct and prove the…

  15. Managing the construction bidding process : a move to simpler construction plan sets

    Science.gov (United States)

    2001-01-31

    This project was conducted to determine whether construction plan sets could be significantly simplified to speed the process of moving projects to construction. The work steps included a literature review, a telephone survey of highway agencies in s...

  16. Contractor’s mistakes during tendering

    Science.gov (United States)

    Kamil, A. I. M.; Othman, N.; Adnan, H.; Zaki, ZA M.

    2018-02-01

    The occurrence of overrun in cost and time in a project that is usually caused by contractors, will generally make peopleput the blameonthem. This happensas a result of the lack of knowledge possessed by the contractors in determining the solution to be undertakendue totheir mistakes, especially when it comes to tendering process as what had happened in the cases that were reported in Supreme Court of Canada. This paper aims to identify the types of mistakes, factors that contribute to the mistakes and the responsiveness to the mistakes so that the contractor will be able to manage and control the mistakes, as well as the solution, along with preventing them from happening, and in making decision whether or notthey may withdraw from the bidding when the fault has been discovered or whether they should request for leniency from the client for a second chance in re-submitting the bid after the discovered inaccuracy. This research has been done based on cases that were related to the contractor’s mistakes during tendering which were collected from the Supreme Courts of Canada. The data have been analysed and interpreted by legal methodology, in which the result shows that the ability level of the contractors to respond to the mistake is unsatisfactory,and the fault is continuouslybeingmade. The findings are expected to educate and provide awareness to the contractors relating to the matters discussed.

  17. Calls for Tender and Market Surveys Roles and Procedures

    CERN Document Server

    Annila, L

    2000-01-01

    ST division has implemented certain procedures to handle the calls for tender and market surveys. In January 1998, the division leader set up the 'call-for-tender co-ordination office' to check and approve each technical document leaving the division. The mandate of the call-for-tender co-ordination office is to check the quality of the documents, in order for these documents to be as clear as possible in terms of both content and structure. The role of this office is to contribute positively and give service to the people writing the documents, and not to give negative criticism. The aim of this paper is to present the mandate of the office, how papers are processed, and to draw up a first result summary.

  18. Improving Construction Process through Integration and Concurrent Engineering

    Directory of Open Access Journals (Sweden)

    Malik Khalfan

    2012-11-01

    Full Text Available In an increasingly competitive business environment, improvedtime-to-market, reduced production cost, quality of the productand customer involvement are rapidly becoming the key successfactors for any product development process. Consequently, mostorganisations are moving towards the adoption of latest technologyand new management concepts and philosophies such as totalquality management and concurrent engineering (CE to bringimprovement in their product development process. This paperdiscusses the adoption of integrated processes and CE withinthe construction industry to enable construction organisations toimprove their project development process. It also discusses aproposed integrated database model for the construction projects,which should enable the construction process to improve, becomemore effective and more efficient.

  19. Constructing process views for service outsourcing

    NARCIS (Netherlands)

    Eshuis, H.; Norta, A.H.; Shin, S.Y.; Ossowski, S.

    2009-01-01

    Service outsourcing is a business paradigm in which an organization has a part of its business process performed by a service provider. The outsourced service can be specified in a public process view, which shields secret or irrelevant details from the internal business process of the provider.

  20. Tender Notices | About IASc | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Limited tender notification for AMC for computers & peripherals. Open tender for supply of printing and photocopier paper. Tender for Transport, Housekeeping and Catering services. Tender for website redesign - Work awarded to lowest bidder Sriranga Digital Software Technologies after scrutiny of price bids; Tender for ...

  1. 49 CFR 230.107 - Tender frame and body.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender frame and body. 230.107 Section 230.107... Tenders Trucks, Frames and Equalizing System § 230.107 Tender frame and body. (a) Maintenance. Tender... repaired: (1) Portions of the tender frame or body (except wheels) that have less than a 21/2 inches...

  2. Proposed Model for Integrating RAMS Method in the Design Process in Construction

    Directory of Open Access Journals (Sweden)

    Saad Al-Jibouri

    2010-05-01

    Full Text Available There is a growing trend in the Netherlands for outsourcing public construction activities to the private sector through the use of integrated contracts. There is also an increasing emphasis from public clients on the use of RAMS and life cycle costing (LCC in the design process of infrastructural projects to improve the performance of designed systems and optimize the project cost. RAMS is an acronym for `reliability, availability, maintainability and safety' and represents a collection of techniques to provide predictions of the performance targets of the required system. Increasingly, RAMS targets are being specified in invitation to tender or contract documents and the parties responsible for the design are required to provide evidence of its application in their design. Recent evidence from practice, complemented with a literature study, has shown that the knowledge and application of RAMS in infrastructural designs are in their infancy compared with other industrial sectors and many designers in construction do not have the necessary knowledge and experience to apply it. This paper describes a proposed model for the integration of RAMS and LCC into the design process in construction. A variation of the model for the application of RAMS in `design, build, finance and maintain' (DBFM contracts that include maintenance requirements is also proposed. The two models involve providing guidelines to simplify the application of RAMs by the designers. The model has been validated for its practicality and usefulness during a workshop by experienced designers. DOI: 10.3763/aedm.2008.0100 Published in the Journal AEDM - Volume 5, Number 4, 2009 , pp. 179-192(14

  3. Automated processing of data for supertree construction

    OpenAIRE

    Hill, Jon; Davis, Katie; Tover, Jaime; Wills, Matthew

    2015-01-01

    Talk given to Evolution2015 on the new autoprocessing functionality of the STK. This involves collecting nomenclature and taxonomic information on the OTUs to create a consistent naming scheme, and following the normal processing.

  4. Information systems for material flow management in construction processes

    Science.gov (United States)

    Mesároš, P.; Mandičák, T.

    2015-01-01

    The article describes the options for the management of material flows in the construction process. Management and resource planning is one of the key factors influencing the effectiveness of construction project. It is very difficult to set these flows correctly. The current period offers several options and tools to do this. Information systems and their modules can be used just for the management of materials in the construction process.

  5. 12 CFR 335.501 - Tender offers.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Tender offers. 335.501 Section 335.501 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY SECURITIES OF NONMEMBER INSURED BANKS § 335.501 Tender offers. The provisions of the applicable and currently...

  6. A Constructive Sharp Approach to Functional Quantization of Stochastic Processes

    OpenAIRE

    Junglen, Stefan; Luschgy, Harald

    2010-01-01

    We present a constructive approach to the functional quantization problem of stochastic processes, with an emphasis on Gaussian processes. The approach is constructive, since we reduce the infinite-dimensional functional quantization problem to a finite-dimensional quantization problem that can be solved numerically. Our approach achieves the sharp rate of the minimal quantization error and can be used to quantize the path space for Gaussian processes and also, for example, Lévy processes.

  7. Limited tender for disposal of old printed journals

    Indian Academy of Sciences (India)

    2016-09-20

    Sep 20, 2016 ... TENDER NO IASC 03 /DISPOSAL OF OLD PRINTED JOURNALS I 2016-17. F. No. : Tender No. ... The competent authority also reserves the right to reject any or all the tenders without assigning any reason thereof. 19.

  8. Influence of winding construction on starter-generator thermal processes

    Science.gov (United States)

    Grachev, P. Yu; Bazarov, A. A.; Tabachinskiy, A. S.

    2018-01-01

    Dynamic processes in starter-generators features high winding are overcurrent. It can lead to insulation overheating and fault operation mode. For hybrid and electric vehicles, new high efficiency construction of induction machines windings is proposed. Stator thermal processes need be considered in the most difficult operation modes. The article describes construction features of new compact stator windings, electromagnetic and thermal models of processes in stator windings and explains the influence of innovative construction on thermal processes. Models are based on finite element method.

  9. Adaptive constructive processes and the future of memory

    OpenAIRE

    Schacter, Daniel L.

    2012-01-01

    Memory serves critical functions in everyday life, but is also prone to error. This article examines adaptive constructive processes, which play a functional role in memory and cognition but can also produce distortions, errors, or illusions. The article describes several types of memory errors that are produced by adaptive constructive processes, and focuses in particular on the process of imagining or simulating events that might occur in one’s personal future. Simulating future events reli...

  10. Formalizing the Process of Constructing Chains of Lexical Units

    Directory of Open Access Journals (Sweden)

    Grigorij Chetverikov

    2015-06-01

    Full Text Available Formalizing the Process of Constructing Chains of Lexical Units The paper investigates mathematical aspects of describing the construction of chains of lexical units on the basis of finite-predicate algebra. Analyzing the construction peculiarities is carried out and application of the method of finding the power of linear logical transformation for removing characteristic words of a dictionary entry is given. Analysis and perspectives of the results of the study are provided.

  11. Renewable Energy Tenders and Community [Em]power[ment]: Latin America and the Caribbean

    International Nuclear Information System (INIS)

    Lucas, Hugo; Munoz Cabre, Miquel; Gomez, Juan Carlos; Leidreiter, Anna; Ranalder, Lea; Williamson, Laura E.; Adib, Rana; Lins, Christine; Ranalder, Lea; Mastny, Lisa; Acuna, Francisco; Arroyo, Tabare; Bayao, Joao; Bonotto, Adriano; Konzen, Gabriel; Vasconcellos Barral Ferreira, Thiago; Bayer, Benjamin; Bravo, Gonzalo; Furlano, Lukas; Camacho, Luis; Carrasco Gonzalez, Fidel; Coronado, Juan; Escobar, Rafael; Gamarra, Alba; Garcia, Henry; Goni, Sebastian; Raquet, Francis; Gsaenger, Stefan; Schenk, Fabian; Mitma, Riquel; Munozcano Alvarez, Luis Alfonso; Ramirez, Michelle; Rodriguez Aguilar, Jessica Susana; Ruiz Carmona, Oscar; Villarreal Singer, Diego; Oceransky, Sergio; Perez, Juan Esteban; Puig, Pep; Trujillo, Ramiro; Chavez, Sandra; Gonzalez, Alaide; Luna, Nestor; Moreno, Adrian

    2017-01-01

    . The main renewable energy markets in Latin America and the Caribbean are dominated by tendering processes, a trend that is likely to continue in the coming years. But whereas tenders are predicated on competition, community-driven projects are based on collaboration. Participating in tendering processes - and winning - requires, among others, significant expertise and access to large reserves of capital, which smaller actors do not have to the same degree as large, specialist renewable energy developers. Under the tendering process, even if their projects are financially viable, actors that take a one-project approach - including community-driven renewable energy projects - are penalised against large developers, which can distribute the costs and risks of tendering to several projects. Tenders can be modified to favour a diversity of actors and community-driven renewable energy projects through the use of various tendering design options. Applying these design options often results in a trade-off between the primary objective - contracting the cheapest electricity from renewables - and the secondary objective of promoting a diversity of actors. As one solution, in the accession process following the tender, community-driven projects can be offered a power purchase agreement at a tariff based on the result of the tender. The accession process captures both the efficiency of tenders and the effectiveness of feed-in tariffs for community projects. Setting limits, in time and quantity, for the implementation of the accession process is necessary to ensure its dynamic efficiency. The accession process would be greatly strengthened and accelerated by the establishment of ambitious, but realistic, mid- and long-term targets for community-driven renewable energy projects. Complementing the accession process, it is proposed that a community power authority be established, with the roles of providing technical, legal and business support; assigning official &apos

  12. Adaptive Constructive Processes and the Future of Memory

    Science.gov (United States)

    Schacter, Daniel L.

    2012-01-01

    Memory serves critical functions in everyday life but is also prone to error. This article examines adaptive constructive processes, which play a functional role in memory and cognition but can also produce distortions, errors, and illusions. The article describes several types of memory errors that are produced by adaptive constructive processes…

  13. The Role of Demonstration Projects in Construction innovation processes

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is describing the methodology of a case-study approach to the investigation of demonstration projects and their impact on the development of process and product innovations in the construction industry.......The article is describing the methodology of a case-study approach to the investigation of demonstration projects and their impact on the development of process and product innovations in the construction industry....

  14. The role of internal and external constructive processes in evolution.

    Science.gov (United States)

    Laland, Kevin; Odling-Smee, John; Turner, Scott

    2014-06-01

    The architects of the Modern Synthesis viewed development as an unfolding of a form already latent in the genes. However, developing organisms play a far more active, constructive role in both their own development and their evolution than the Modern Synthesis proclaims. Here we outline what is meant by constructive processes in development and evolution, emphasizing how constructive development is a shared feature of many of the research developments central to the developing Extended Evolutionary Synthesis. Our article draws out the parallels between constructive physiological processes expressed internally and in the external environment (niche construction), showing how in each case they play important and not fully recognized evolutionary roles by modifying and biasing natural selection. © 2014 The Authors. The Journal of Physiology © 2014 The Physiological Society.

  15. The role of internal and external constructive processes in evolution

    Science.gov (United States)

    Laland, Kevin; Odling-Smee, John; Turner, Scott

    2014-01-01

    The architects of the Modern Synthesis viewed development as an unfolding of a form already latent in the genes. However, developing organisms play a far more active, constructive role in both their own development and their evolution than the Modern Synthesis proclaims. Here we outline what is meant by constructive processes in development and evolution, emphasizing how constructive development is a shared feature of many of the research developments central to the developing Extended Evolutionary Synthesis. Our article draws out the parallels between constructive physiological processes expressed internally and in the external environment (niche construction), showing how in each case they play important and not fully recognized evolutionary roles by modifying and biasing natural selection. PMID:24591574

  16. Comparative proteomics reveals the physiological differences between winter tender shoots and spring tender shoots of a novel tea (Camellia sinensis L.) cultivar evergrowing in winter.

    Science.gov (United States)

    Liu, Shengjie; Gao, Jiadong; Chen, Zhongjian; Qiao, Xiaoyan; Huang, Hualin; Cui, Baiyuan; Zhu, Qingfeng; Dai, Zhangyan; Wu, Hualing; Pan, Yayan; Yang, Chengwei; Liu, Jun

    2017-11-20

    A recently discovered tea [Camellia sinensis (L.) O. Kuntze] cultivar can generate tender shoots in winter. We performed comparative proteomics to analyze the differentially accumulated proteins between winter and spring tender shoots of this clonal cultivar to reveal the physiological basis of its evergrowing character during winter. We extracted proteins from the winter and spring tender shoots (newly formed two leaves and a bud) of the evergrowing tea cultivar "Dongcha11" respectively. Thirty-three differentially accumulated high-confidence proteins were identified by matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF / TOF MS). Among these, 24 proteins had increased abundance while nine showed were decreased abundance in winter tender shoots as compared with the spring tender shoots. We categorized the differentially accumulated proteins into eight critical biological processes based on protein function annotation including photosynthesis, cell structure, protein synthesis & destination, transporters, metabolism of sugars and polysaccharides, secondary metabolism, disease/defense and proteins with unknown functions. Proteins with increased abundance in winter tender shoots were mainly related to the processes of photosynthesis, cytoskeleton and protein synthesis, whereas those with decreased abundance were correlated to metabolism and the secondary metabolism of polyphenolic flavonoids. Biochemical analysis showed that the total contents of soluble sugar and amino acid were higher in winter tender shoots while tea polyphenols were lower as compared with spring tender shoots. Our study suggested that the simultaneous increase in the abundance of photosynthesis-related proteins rubisco, plastocyanin, and ATP synthase delta chain, metabolism-related proteins eIF4 and protease subunits, and the cytoskeleton-structure associated proteins phosphatidylinositol transfer protein and profilin may be because of the adaptation of the

  17. Liquefied natural gas tender crashworthiness research

    Science.gov (United States)

    2015-03-23

    Research is being conducted to develop technical : information needed to formulate effective natural gas fuel : tender crashworthiness standards. This research is being : performed for the Federal Railroad Administrations (FRAs) : Office of Res...

  18. Materials for construction and civil engineering science, processing, and design

    CERN Document Server

    Margarido, Fernanda

    2015-01-01

    This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: ·       Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure ·       Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes ·  �...

  19. Tendering and relationships in strategic logistics service provider selection for global supply chain organisations

    DEFF Research Database (Denmark)

    Tambo, Torben

    of private enterprise purchase additionally relate to the acceptance of some level of dialogue before, during and after the tender due date. Tendering is viewed as an extreme case of relationship management, where newcomers and existing suppliers are put on an equal footing, decades of incorporated...... have an impact. During the tendering process, innovation, knowledge management and operational procedures in interaction with the business relationships are often overlooked and need active management and proper contingency planning. This paper contributes to a deeper understanding of both sides...

  20. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender roller bearing journal boxes. 230.103... Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing journal boxes shall be maintained in a safe and suitable condition. ...

  1. Problems of improving the investing process management in NPP construction

    International Nuclear Information System (INIS)

    Denisov, G.A.

    1986-01-01

    Problems of development of the optimal system for the investing process management in NPP construction are discussed. It includes 3 steps: design construction ( including building structure and equipment production ), and achievement of designed technical and economical indices, during reactor start-up. The method for estimating the interest of each participator of the intensing process and developing the optimal solution, that is capable to approach these interests, is suggested. The conclusion is made that it is necessary to develop and confirm the branch standard, which should include a complex amalgamated network of works to improve the organization of the investing process

  2. The practice of safety culture construction in radiation processing enterprise

    International Nuclear Information System (INIS)

    Kong Xiangshan; Zhang Yue; Yang Bin; Xu Tao; Liu Wei; Hao Jiangang

    2014-01-01

    Security is an integral part of the process of business operations. The radiation processing enterprises due to their own particularity, more need to focus on the operation of the safety factors, the construction of corporate safety culture is of great significance in guiding carry out the work of the Radiation Protection. Radiation processing enterprises should proceed from their own characteristics, the common attitude of security systems and security construction, and constantly improved to ensure the personal safety of radiation workers in the area of safety performance. (authors)

  3. Causative get-constructions in the dialogued passages in F. Scott Fitzgerald’s novels The Beautiful and Damned and Tender Is the Night as gender-conditioned structures

    Directory of Open Access Journals (Sweden)

    Gołąbek Rafał

    2015-05-01

    Full Text Available It goes without saying that in modern sociolinguistics there is a consensus with regard to the fact that the language of males and females differs. The initial sections of the article briefly address the peculiarities of gendered speech as to provide a theoretical background for checking whether the causative get is used similarly or differently by men and women in the two of F. Scott Fitzgerald’s novels: The Beautiful and Damned and Tender Is the Night. The basic expectation formed is that the motifs for triggering the use of causative get are of social rather than structural nature. Before the analysis is carried out, the group of the English periphrastic causatives are sketchily characterized. Generally, what has been found is that there is a clear, socially-motivated pattern of how F. Scott Fitzgerald uses the causative get in the dialogued occurrences in his two novels. Get is a characteristic of men’s talk, but it is also the expected form while female characters address male ones - hence the verb is labelled as “masculine” get. Moreover, it has been discovered that there does not seem to be any particular pattern in either the speaker’s mood or the speaker’s attitude expressed that would trigger the use of the causative verb in question. Yet, what seems to be a well-defined tendency, when it comes to the speaker-hearer power relation, is that the speaker usually assumes a more superior position than the hearer when he or she uses the causative verb. The superiority in most cases is strongly associated with masculinity. Hence, what is postulated is that the causative get is labelled not only as “masculine" but also as “superior”.

  4. Constructional change, paradigmatic structure and the orientation of usage processes

    DEFF Research Database (Denmark)

    Heltoft, Lars

    2014-01-01

    construction from the 18th century to the present, a specialisation process parallel to the one described for English by Colleman & De Clerck (2011), though not identical to it. The semantics of constructions is described in terms of linguistic content, as distinct from conceptual structure, and the linguistic...... content of constructions is organised to a great extent in paradigmatic oppositions, similar to those found in classical morphology (Nørgård-Sørensen, Heltoft & Schøsler 2011). This organisation principle implies that the semantic description must uncover the boundaries of the construction’s content...

  5. [Work reality and the construction process of the nurse's identity].

    Science.gov (United States)

    Netto, Laura Filomena Santos de Araújo; Ramos, Flávia Regina Souza

    2002-01-01

    This study tries to understand the relation between the reality of the nurse's everyday work and the construction process of this identity, using Agnes Heller's sociological theory of everyday life as the main reference. The possibilities of the worker's expression and fulfillment occur through objective and subjective elements of job reality which comes upon the worker as people who put order and tension in their everyday job; these job determinants imprint and produce impacts, giving sense to the work quality and constructing concrete possibilities to the worker to manifest him/herself as Whole being, guiding the construction of his/her identity.

  6. A Study of Construction Reactor Oversight Process in US

    International Nuclear Information System (INIS)

    Yun, I.; Kim, S. Y.; Jeong, G. Y.; Kim, S. P.

    2015-01-01

    This process provides a risk-informed approach such as construction significance determination process (SDP) and construction program performance index analogous to those used in the Reactor Oversight Process (ROP). The cROP has been applied to Vogtle units 3, 4 and V.C. Summer units 2, 3 under construction for the regulatory inspection. In this paper, the cROP is dissected to present its major contents and characteristics. The main features of the cROP can be summarized as followings: 1) The cROP which adopts the concept of the ROP used for operating NPPs assesses NPP under construction periodically to determine the appropriate level of regulatory response. 2) The cROP consists of three parts: the CIP, the CAP and the CEP. 3) The inspections for NPPs under construction can be categorized into three parts: vendor inspection, baseline inspection and supplemental and plant specific inspections. USNRC's regulatory resources can be used effectively based on baseline inspection, which is using ITAAC inspections. The construction SDP is used to assign the color scheme to categorize the significance of inspection findings. Regulatory actions are taken from CAM to which the significance of inspection findings input. In this paper, major contents and characteristics of USNRC's cROP have been presented

  7. Conditions of contract for construction for building and engineering works designed by the employer : general conditions : guidance for the preparation of particular conditions forms of letter of tender, contract agreement and dispute adjudication agreement

    CERN Document Server

    1999-01-01

    Conditions of Contract for Construction, which are recommended for building or engineering works designed by the Employer or by his representative, the Engineer. Under the usual arrangements for this type of contract, the Contractor constructs the works in accordance with a design provided by the Employer. However, the works may include some elements of Contractor-designed civil, mechanical, electrical and/or construction works.

  8. Design ampersand construction innovations of the defense waste processing facility

    International Nuclear Information System (INIS)

    McKibben, J.M.; Pair, C.R.; Bethmann, H.K.

    1990-01-01

    Construction of the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) is essentially complete. The facility is designed to convert high-level radioactive waste, now contained in large steel tanks as aqueous salts and sludge, into solid borosilicate glass in stainless steel canisters. All processing of the radioactive material and operations in a radioactive environment will be done remotely. The stringent requirements dictated by remote operation and new approaches to the glassification process led to the development of a number of first-of-a-kind pieces of equipment, new construction fabrication and erection techniques, and new applications of old techniques. The design features and construction methods used in the vitrification building and its equipment were to accomplish the objective of providing a state-of-the-art vitrification facility. 3 refs., 10 figs

  9. A Framework for Coordination Process into Construction Projects

    Directory of Open Access Journals (Sweden)

    Alaloul Wesam S.

    2016-01-01

    Full Text Available Construction industry is recognized as high fragmentation, low efficiency, cost and time overruns in contrast with other industries. These peculiarities are the main roots of poor performance facing by the industry. Effective coordination is vital in construction projects success and mitigate the fragmentation dilemma, however it is often difficult to achieve and need iterative process. Coordination is core issue to improve performance in construction project. Relevant studies have addressed the coordination process importance and implementation, but not in a framework. This paper propose a framework for coordination process in construction projects, as well as its relationship with performance. The objective of the framework is to provide a roadmap for the construction parties to realize operational excellence so that collectively stakeholders can recognize the effect of coordination process application on the project performance. The data were obtained from literature review and structured interviews with five experts. The analysis produced the framework of coordination based on the extensively used procedures for information and data flow between stakeholders.

  10. Using reflectance spectroscopy to predict beef tenderness.

    Science.gov (United States)

    Bowling, M B; Vote, D J; Belk, K E; Scanga, J A; Tatum, J D; Smith, G C

    2009-05-01

    A study was conducted to determine if reflectance measurements made in the near-infrared region of the spectrum were additive to reflectance measurements made in the visible region of the spectrum for predicting Warner-Bratzler shear force (WBSF) values. Eighty seven strip loins were collected following fabrication over 3d at a commercial beef processing facility from heifer carcasses with Slight or Traces marbling scores. Spectroscopic measurements were made at approximately 50h postmortem using a Hunter-Lab UltraScan. Subsequently, all strip loins were aged for 14d, cooked to an internal temperature of 70°C, and sheared to obtain WBSF values. Reflectance measurements obtained in the near-infrared region of the spectrum were correlated with WBSF values, however, these measurements were not additive to the predictive ability of reflectance measurements (R(2) values did not differ) made in the visible portion of the spectrum when the use of broad-band wavelength filters were simulated. It was therefore determined, that both the visible and near-infrared spectra measure reflectance and that both methods are acceptable methods of tenderness prediction.

  11. UNIFICATION OF PROCESSES OF SORTING OUT OF DESTROYED CONSTRUCTION OBJECTS

    Directory of Open Access Journals (Sweden)

    SHATOV S. V.

    2015-09-01

    Full Text Available Summary. Problem statement. Technogenic catastrophes, failures or natural calamities, result in destruction of build objects. Under the obstructions of destructions can be victims. The most widespread technogenic failure is explosions of gas. The structure of obstructions changes and depends on parameters and direction of explosion, firstly its size and location of wreckages. Sorting out of obstructions is carried out with machines and mechanisms which do not meet the requirements of these works, that predetermines of carrying out of rescue or restoration works on imperfect scheme , especially on the initial stages, and it increases terms and labour intensiveness of their conduct. Development technological solution is needed for the effective sorting out of destructions of construction objects. Purpose. Development of unification solution on the improvement of technological processes of sorting out of destructions of buildings and constructions. Conclusion. The analysis of experience of works shows on sorting out of the destroyed construction objects, show that they are carried out on imperfect scheme, which do not take into account character of destruction of objects and are based on the use of construction machines which do not meet the requirements of these processes, and lead to considerable resource losses. Developed unified scheme of sorting out of the destroyed construction objects depending on character of their destruction and possibility of line of works, and also with the use of build machines with a multipurpose equipment, provide the increase of efficiency of carrying out of rescue and construction works.

  12. Extra-terrestrial construction processes - Advancements, opportunities and challenges

    Science.gov (United States)

    Lim, Sungwoo; Prabhu, Vibha Levin; Anand, Mahesh; Taylor, Lawrence A.

    2017-10-01

    Government space agencies, including NASA and ESA, are conducting preliminary studies on building alternative space-habitat systems for deep-space exploration. Such studies include development of advanced technologies for planetary surface exploration, including an in-depth understanding of the use of local resources. Currently, NASA plans to land humans on Mars in the 2030s. Similarly, other space agencies from Europe (ESA), Canada (CSA), Russia (Roscosmos), India (ISRO), Japan (JAXA) and China (CNSA) have already initiated or announced their plans for launching a series of lunar missions over the next decade, ranging from orbiters, landers and rovers for extended stays on the lunar surface. As the Space Odyssey is one of humanity's oldest dreams, there has been a series of research works for establishing temporary or permanent settlement on other planetary bodies, including the Moon and Mars. This paper reviews current projects developing extra-terrestrial construction, broadly categorised as: (i) ISRU-based construction materials; (ii) fabrication methods; and (iii) construction processes. It also discusses four categories of challenges to developing an appropriate construction process: (i) lunar simulants; (ii) material fabrication and curing; (iii) microwave-sintering based fabrication; and (iv) fully autonomous and scaled-up construction processes.

  13. Constructal theory through thermodynamics of irreversible processes framework

    International Nuclear Information System (INIS)

    Tescari, S.; Mazet, N.; Neveu, P.

    2011-01-01

    Highlights: → Point to area flow problem is solved through Thermodynamics of irreversible processes. → A new optimisation criterion is defined: the exergy or entropy impedance. → Optimisation is performed following two different routes, constructal or global. → Global optimisation is more efficient than constructal optimisation. → Global optimisation enhances the domain of construct benefits. - Abstract: Point to volume flow problem is revisited on a thermodynamics of irreversible processes (TIP) basis. The first step consists in evaluating the local entropy production of the system, and deducing from this expression the phenomenological laws. Then, the total entropy production can be simply evaluated. It is demonstrated that total entropy production can be written in a remarkable form: the product of the so-called entropy impedance with the square of the heat flux. As the heat flux is given, optimisation consists in minimising the entropy impedance. It is also shown that minimising entropy impedance minimises the maximum temperature difference. Applied to the elemental volume, this optimisation process leads to a shape factor close to the one already published. For the first construction, the equivalent system is defined as stated by Prigogine: when subjected to the same constraints, two systems are thermodynamically equivalent if their entropy production is equal. Two optimisation routes are then investigated: a global optimisation where all scales are taken into account and the constructal optimisation where the system is optimised scale by scale. In this second case, results are close to Ghodossi's work. When global optimisation is performed, it is demonstrated that conductive paths have to be spread uniformly in the active material (i.e. the number of elemental volumes must go to infinite). Comparing the two routes, global optimisation leads to better performance than constructal optimisation. Moreover, global optimisation enlarges the domain of

  14. Improving occupational health care for construction workers: a process evaluation

    NARCIS (Netherlands)

    Boschman, Julitta S.; van der Molen, Henk F.; Sluiter, Judith K.; Frings-Dresen, Monique H. W.

    2013-01-01

    To evaluate the process of a job-specific workers' health surveillance (WHS) in improving occupational health care for construction workers. From January to July 2012 were 899 bricklayers and supervisors invited for the job-specific WHS at three locations of one occupational health service

  15. UOE Pipe Manufacturing Process Simulation: Equipment Designing and Construction

    Science.gov (United States)

    Delistoian, Dmitri; Chirchor, Mihael

    2017-12-01

    UOE pipe manufacturing process influence directly on pipeline resilience and operation capacity. At present most spreaded pipe manufacturing method is UOE. This method is based on cold forming. After each technological step appears a certain stress and strain level. For pipe stress strain study is designed and constructed special equipment that simulate entire technological process.UOE pipe equipment is dedicated for manufacturing of longitudinally submerged arc welded DN 400 (16 inch) steel pipe.

  16. Tender moments in the North Sea

    Energy Technology Data Exchange (ETDEWEB)

    Fox, C

    1991-04-01

    Described is tender-assisted drilling (TAD) on the UK North Sea Gannet field. The Gannet field is developed by Shell UK Exploration and Production (Shell Expro). In March 1990, Shell Expro awarded Sedco Forex the design and engineering contract to convert the semisubmersible drilling rig Sedco 704 into the Gannet TSV (Tender Support Vessel). The only semisubmersible TSV operation so far to have completed drilling in the North Sea has been in the Norwegian sector. The Odin field, operated by Esso Norge a/s, was developed using the converted drilling rig Treasure Hunter. 1 fig., 1 ill., 3 refs.

  17. The impact of preferential procurement in South African construction ...

    African Journals Online (AJOL)

    The impact of preferential procurement in South African construction industry. ... The outcome of this study shows that there are problems in the implementation of PPPFA during tendering and procurement processes and procedures for achieving success in government projects. Key words: HDIs, PPPFA, Policies, ...

  18. Risk pricing practices in finance, insurance and construction

    OpenAIRE

    Laryea, Samuel

    2008-01-01

    A review of current risk pricing practices in the financial, insurance and construction sectors is conducted through a comprehensive literature review. The purpose was to inform a study on risk and price in the tendering processes of contractors: specifically, how contractors take account of risk when they are calculating their bids for construction work. The reference to mainstream literature was in view of construction management research as a field of application rather than a fundamental ...

  19. Plants in constructed wetlands help to treat agricultural processing wastewater

    Directory of Open Access Journals (Sweden)

    Mark Grismer

    2008-05-01

    Full Text Available Over the past three decades, wineries in the western United States and sugarcane processing for ethanol in Central and South America have experienced problems related to the treatment and disposal of process wastewater. Both winery and sugarcane (molasses wastewaters are characterized by large organic loadings that change seasonally and are detrimental to aquatic life. We examined the role of plants for treating these wastewaters in constructed wetlands. In the greenhouse, subsurface-flow flumes with volcanic rock substrates and plants steadily removed approximately 80% of organic-loading oxygen demand from sugarcane process wastewater after about 3 weeks of plant growth; unplanted flumes removed about 30% less. In field studies at two operational wineries, we evaluated the performance of similar-sized, paired, subsurface constructed wetlands with and without plants; while both removed most of the oxygen demand, removal rates in the planted system were slightly greater and significantly different from those of the unplanted system under field conditions.

  20. A camera specification for tendering purposes

    International Nuclear Information System (INIS)

    Lunt, M.J.; Davies, M.D.; Kenyon, N.G.

    1985-01-01

    A standardized document is described which is suitable for sending to companies which are being invited to tender for the supply of a gamma camera. The document refers to various features of the camera, the performance specification of the camera, maintenance details, price quotations for various options and delivery, installation and warranty details. (U.K.)

  1. A Systematic Approach to Modelling Change Processes in Construction Projects

    Directory of Open Access Journals (Sweden)

    Ibrahim Motawa

    2012-11-01

    Full Text Available Modelling change processes within construction projects isessential to implement changes efficiently. Incomplete informationon the project variables at the early stages of projects leads toinadequate knowledge of future states and imprecision arisingfrom ambiguity in project parameters. This lack of knowledge isconsidered among the main source of changes in construction.Change identification and evaluation, in addition to predictingits impacts on project parameters, can help in minimising thedisruptive effects of changes. This paper presents a systematicapproach to modelling change process within construction projectsthat helps improve change identification and evaluation. Theapproach represents the key decisions required to implementchanges. The requirements of an effective change processare presented first. The variables defined for efficient changeassessment and diagnosis are then presented. Assessmentof construction changes requires an analysis for the projectcharacteristics that lead to change and also analysis of therelationship between the change causes and effects. The paperconcludes that, at the early stages of a project, projects with a highlikelihood of change occurrence should have a control mechanismover the project characteristics that have high influence on theproject. It also concludes, for the relationship between changecauses and effects, the multiple causes of change should bemodelled in a way to enable evaluating the change effects moreaccurately. The proposed approach is the framework for tacklingsuch conclusions and can be used for evaluating change casesdepending on the available information at the early stages ofconstruction projects.

  2. Constructing knowledge through perceptual processes in making craft-art

    Directory of Open Access Journals (Sweden)

    Milla Ojala

    2013-10-01

    Full Text Available The focus of the study is on the knowledge that is constructed through perceptual processes during craft making in the context of the Finnish Basic Education in the Arts (BEA system. Craft studies in the BEA are defined as craft-art. The research method used is the grounded theory. The data consists of seven interviews and participant observations. Participants in the study are adolescents who study craft-art in the BEA system in Visual Art School, Aimo in Hämeenlinna. The aim of the article is to present, define and reflect on the concepts, properties and dimensions concerning perceptual processes that are discovered in this stage of the study following grounded theory procedures. The perceptual processes are an essential means of constructing knowledge in craft-art. Consequently, one aim of the study is to discuss how these processes are connected to various types of knowledge. The perceptual processes are described by seven concepts: imitative, anticipative, evaluative, experimental, emotional, temporal and bodily perceptions. They indicate on a conceptual level the characteristic of knowledge constructed through perceptual processes in craft-art. Further, theconcepts have several properties that can vary dimensionally between two qualities. The properties are activity, function and position. The dimensions of the properties vary from active to passive, formal to informal and internal to external. In conclusion, the concepts can describe a large range of incidents in different situations. They also seem to describe well the practice of  craft-art and there are several connections with pre-existing concepts of knowledge.Keywords: Craft, Knowledge, Perceptual process, Basic Education in the Arts, Grounded Theory 

  3. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and bearing...

  4. Media and identification processes: a ritual and dramatic construction

    Directory of Open Access Journals (Sweden)

    Salomé Sola-Morales

    2016-07-01

    Full Text Available The present theoretical paper analyzes the way mediatic communication construct identifications. The thesis proposed is that the media configure ritually and dramatically identifications made by individuals and groups. First of all, we show the limitations of the concept of “identity” and we propose to use “identification” instead. Second, we explore the extent of social drama theory and role theory and we open it to new theoretical challenges and perspectives. Thirdly, it is shown that the concept of "ritual" is very useful to understand and interpret the identity construction through the media. All this leads us to conclude that both the theatricality and rituality are key to understanding the processes of identification that individuals and groups make in relation to the media.

  5. Gertrude Stein’s Tender Buttons (1911)

    DEFF Research Database (Denmark)

    Balle, Søren Hattesen

    Gertrude Stein’s book of prose poems Tender Buttons has been characterized as a modernist literary work by most of its critics. As a distinctive feature of its modernist poetics critics in particular emphasize Stein’s denial of representation through verbal abstraction and autotelism. This paper......, however, intends to read Tender Buttons somewhat differently by suggesting that the poems may be viewed as an example of a displaced Rabbinic hermeneutics in the sense given the term by Susan Handelman. Inasmuch as Stein refuses to name the many objects properly that the titles of the poems introduce...... and instead – to employ her own term – “abuses” their names by way of wordplay, punning, syntactical ambiguity, and semantic disruption, she impersonates a secular Reb Stein, who stays faithful to the Scripture by sacred contempt of representation and obedience to (the play of) the letter. Perhaps...

  6. Caracterização do processo de rigor mortis em músculos de eqüinos e maciez da carne Caracterization of rigor mortis process of muscle horse and meat tenderness

    Directory of Open Access Journals (Sweden)

    Tatiana Pacheco Rodrigues

    2004-08-01

    Full Text Available Esta pesquisa utilizou 12 eqüinos de diferentes idades, abatidos em um matadouro-frigorífico (SIF 1803 em Araguari-MG, e estudou a temperatura, pH, comprimento de sarcômero em diferentes intervalos de tempo após abate (1h, 5h, 8h, 10h, 12h, 15h e 24h e força de cisalhamento (maciez dos músculos Longissimus dorsi e Semitendinosus, com intuito de caracterizar o desenvolvimento do processo de rigor mortis de eqüídeos durante o processamento industrial. A temperatura da câmara fria variou de 10,2°C a 4,0°C e a temperatura média inicial das carcaças foi de 35,32°C e a final de 4,15°C. O pH inicial médio do músculo Longissimus dorsi foi 6,49 e o final 5,63, e para o músculo Semitendinosus o pH inicial médio foi 6,44 e o final 5,70. A menor medida de sarcômero observada em ambos os músculos foi na 15ª hora após abate, ou seja, 1,44µm e 1,41µm, respectivamente. A carne dos eqüídeos adultos foi mais dura (pThis work studied 12 horses at different ages butchered in a slaughterhouse in Minas Gerais State, Brazil (SIF 1803 and evaluated temperature, pH, sarcomere length in different periods after slaughter (1h, 5h, 8h, 10h, 12h, 15h, and 24 hours as well as the shear force (meat tenderness of the Longissimus dorsi and Semitendinosus muscles, aiming at characterizing the rigor mortis onset in the meat during industrial processing. The chilly room temperature varied from 10.2°C to 4.0°C, and the mean initial carcass temperature was 35.32°C and the final one was 4.15°C. The mean initial pH of Longissimus dorsi was 6.49 and the final one was 5.63; the mean initial pH of Semitendinosus was 6.44 and the final one was 5.70. The smallest sarcomere size obtained in both muscles occurred at 15 hours postmortem, and the sarcomere lengths were 1.44 µm and 1.41 µm, respectively. The meat from adult horses was tougher than that from young ones (p<0.05, and the Semitendinosus muscle was tougher than Longissimus dorsi muscle.

  7. Construction material processed using lunar simulant in various environments

    Science.gov (United States)

    Chase, Stan; Ocallaghan-Hay, Bridget; Housman, Ralph; Kindig, Michael; King, John; Montegrande, Kevin; Norris, Raymond; Vanscotter, Ryan; Willenborg, Jonathan; Staubs, Harry

    1995-01-01

    The manufacture of construction materials from locally available resources in space is an important first step in the establishment of lunar and planetary bases. The objective of the CoMPULSIVE (Construction Material Processed Using Lunar Simulant In Various Environments) experiment is to develop a procedure to produce construction materials by sintering or melting Johnson Space Center Simulant 1 (JSC-1) lunar soil simulant in both earth-based (1-g) and microgravity (approximately 0-g) environments. The characteristics of the resultant materials will be tested to determine its physical and mechanical properties. The physical characteristics include: crystalline, thermal, and electrical properties. The mechanical properties include: compressive tensile, and flexural strengths. The simulant, placed in a sealed graphite crucible, will be heated using a high temperature furnace. The crucible will then be cooled by radiative and forced convective means. The core furnace element consists of space qualified quartz-halogen incandescent lamps with focusing mirrors. Sample temperatures of up to 2200 C are attainable using this heating method.

  8. Constructed wetlands for pollution control: processes, performance, design and operation

    National Research Council Canada - National Science Library

    2000-01-01

    .... Types of constructed wetland, major design parameters, role of vegetation, hydraulic patterns, loadings, treatment efficiency, construction, operation and maintenance costs are discussed in depth...

  9. Construction Of A Computerised Information-Processing Test Battery

    Directory of Open Access Journals (Sweden)

    Johann M. Schepers

    2002-09-01

    Full Text Available The primary goal of the study was to construct a computerised information-processing test battery to measure choice reaction time for up to and including six bits of information, to measure discrimination reaction time with regard to colour patterns and form patterns, to measure rate of information processing with regard to perceptual stimuli and conceptual reasoning, and to develop a suitable scoring system for the respective tests. The battery of tests was applied to 58 pilots. Opsomming Die hoofdoel van die studie was om ‘n gerekenariseerde inligtingverwerkingstoets-battery te konstrueer om keusereaksietyd tot en met ses bis inligting te meet, om diskriminasie-reaksietyd ten opsigte van kleurpatrone en vormpatrone te meet, om tempo van inligtingverwerking ten opsigte van perseptuele stimuli en konseptuele redenering te meet en om ‘n gepaste nasienstelsel vir die onderskeie toetse te ontwikkel. Die battery toetse is op 58 vlieëniers toegepas

  10. Application of the problem solving in the discipline Constructive Processes

    Directory of Open Access Journals (Sweden)

    Juan Jesús Zamora-Vega

    2017-04-01

    Full Text Available The school cannot intend alone to transmit knowledge and practices on facts and phenomena of the life. To achieve this, it is demanded of a productive school, in which spreads the educational process by means of the participation of the students, directed by their teachers, in the solution of problems of the school and social practice. In this article the experience of the application is explained, of the resolution of problems in the subject Curriculum Own design Shop I and its integration with educational Shop II, through the heuristic method-elective for the constructive process of articles, which is one of the results of the titled investigation project "The initial and permanent formation of the professional of the career Labor Education-Computer science. A renovated focus". The relevancy and approval of the method was proven of empiric form and its results detailed in the development.

  11. A bench-top hyperspectral imaging system to classify beef from Nellore cattle based on tenderness

    Science.gov (United States)

    Nubiato, Keni Eduardo Zanoni; Mazon, Madeline Rezende; Antonelo, Daniel Silva; Calkins, Chris R.; Naganathan, Govindarajan Konda; Subbiah, Jeyamkondan; da Luz e Silva, Saulo

    2018-03-01

    The aim of this study was to evaluate the accuracy of classification of Nellore beef aged for 0, 7, 14, or 21 days and classification based on tenderness and aging period using a bench-top hyperspectral imaging system. A hyperspectral imaging system (λ = 928-2524 nm) was used to collect hyperspectral images of the Longissimus thoracis et lumborum (aging n = 376 and tenderness n = 345) of Nellore cattle. The image processing steps included selection of region of interest, extraction of spectra, and indentification and evalution of selected wavelengths for classification. Six linear discriminant models were developed to classify samples based on tenderness and aging period. The model using the first derivative of partial absorbance spectra (give wavelength range spectra) was able to classify steaks based on the tenderness with an overall accuracy of 89.8%. The model using the first derivative of full absorbance spectra was able to classify steaks based on aging period with an overall accuracy of 84.8%. The results demonstrate that the HIS may be a viable technology for classifying beef based on tenderness and aging period.

  12. Cognitive processes in criminal profile construction: a preliminary study.

    Science.gov (United States)

    Kocsis, Richard N; Middledorp, Jenny; Try, Andrew C

    2005-12-01

    This study undertook an empirically based examination of the cognitive processes associated with the accurate construction of a criminal psychological profile. This was accomplished by comparing the abilities of profilers and nonprofilers in two simulated profiling exercises that measured both profile accuracy and an individual's performance on various tests of memory and comprehension related to the case materials presented in each exercise. The results of these experiments suggest that an incremental relationship exists between comprehension of the case materials and accuracy of the profiles generated. In addition, the findings provide some tentative indications that the comprehension of case material in a narrative (i.e., written) format is an integral cognitive function to proficient profiling.

  13. Invitations to tenders from Hydro-Quebec: many projects, little MW?

    International Nuclear Information System (INIS)

    Turmel, A.

    2004-01-01

    Topics discussed include the regulatory and jurisdictional framework governing the tendering process, and the difficulties involved in filing applications. The roles of Hydro-Quebec, the Quebec government, and the Quebec government's economic regulation agency, Regie de l'energie were covered

  14. Improving Building Performance through Integrating Constructability in the Design Process

    OpenAIRE

    Ezzat Othman, Ayman Ahmed

    2011-01-01

    The traditional procurment approaches commonly adopted in construction projects and the involvement of multitude of various project participants with diverse objectives, skills and interests tended to separate design from construction.This separation obstructs contractors from providing designers with construction feedback and suggestions for design improvement, which ultimately hampers the improvement of building performance. Because of the importance of the design phase and the vit...

  15. Construction accidents: identification of the main associations between causes, mechanisms and stages of the construction process.

    Science.gov (United States)

    Carrillo-Castrillo, Jesús A; Trillo-Cabello, Antonio F; Rubio-Romero, Juan C

    2017-06-01

    To identify the most frequent causes of accidents in the construction sector in order to help safety practitioners in the task of prioritizing preventive actions depending on the stage of construction. Official accident investigation reports are analysed. A causation pattern is identified with the proportion of causes in each of the different possible groups of causes. Significant associations of the types of causes with accident mechanisms and construction stages have been identified. Significant differences have been found in accident causation depending on the mechanism of the accident and the construction stage ongoing. These results should be used to prioritize preventive actions to combat the most likely causes for each accident mechanism and construction stage.

  16. Italian mission. Found a consortium with Italgas and win a Greek tender

    International Nuclear Information System (INIS)

    Matejovic, R.; Kinces, P.

    1999-01-01

    In this interview two projects of the company Slovak Gas Industry (SPP) are discussed. The first project is SPP's joint participation in the international tender on introduction of gas in Greece. The second project regards the construction of a steam-gas power plant nearby the town of Lucenec. This project has already entered a certain stage of solution and a third partner that has been approached - Russian gas company Gazprom - is to become involved in it. (authors)

  17. Tender in power-plants back to starting point

    International Nuclear Information System (INIS)

    TREND

    2003-01-01

    Even though there was no progress in privatisation of a 40-percent stake in Slovenske elektrarne (SE), a.s., Bratislava a government decree on re-opening of the tender issued in July will allow more prospects to participate. New prospects that are expected to submit their offers are Czech CEZ and American AES. At the same time the original eight prospects that submitted their offers earlier will have the opportunity to withdraw from the tender or review their offers. The new prospects can show their interest in requesting a information memorandum that will be published shortly and then PricewaterhouseCoopers (PwC) will state a date when the offers have to be submitted. After the original offers are updated and the new ones submitted, the offers will be evaluated. Representative of PwC, Peter Mitka refused to discuss the evaluation deadlines and the consecutive due diligence in SE to be conducted by selected investors. The company to have restarted the whole process was the Czech CEZ that had announces its intention to privatise not only the conventional part of SE but the nuclear part as well. The remaining prospects only show interest in hydraulic power plants or conventional power plants but none of them is interested in nuclear power plants. Even though the process is still open and theoretically other prospects could show their interest in the future, Minister of Economy, Robert Nemcsics does not expect that this step would be repeated. And so the number of prospects is ten. In the past the Minister expressed his view that the most suitable solution would be so sell the SE as a whole and during the first press conference given together with privatisation advisor the Minister explained that there was no time-pressure in regards to the privatisation process as an internal restructuring of the company had to be completed first

  18. Modularization in construction processes New Nuclear Power Plants

    International Nuclear Information System (INIS)

    Martinez, I.; Cobos, A.; Herrera Ropero, D.

    2012-01-01

    The aim of this work is that it has the capacity and expertise to analyze the suitability of modular technology design and construction compared to conventional nuclear plants. It will define the criteria for selecting the areas of modularity and the impact on design and its interfaces with engineering, supply, including logistics and construction.

  19. Improving occupational health care for construction workers: a process evaluation.

    Science.gov (United States)

    Boschman, Julitta S; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

    2013-03-11

    To evaluate the process of a job-specific workers' health surveillance (WHS) in improving occupational health care for construction workers. From January to July 2012 were 899 bricklayers and supervisors invited for the job-specific WHS at three locations of one occupational health service throughout the Netherlands. The intervention aimed at detecting signs of work-related health problems, reduced work capacity and/or reduced work functioning. Measurements were obtained using a recruitment record and questionnaires at baseline and follow-up. The process evaluation included the following: reach (attendance rate), intervention dose delivered (provision of written recommendations and follow-up appointments), intervention dose received (intention to follow-up on advice directly after WHS and remembrance of advice three months later), and fidelity (protocol adherence). The workers scored their increase in knowledge from 0-10 with regard to health status and work ability, their satisfaction with the intervention and the perceived (future) effect of such an intervention. Program implementation was defined as the mean score of reach, fidelity, and intervention dose delivered and received. Reach was 9% (77 workers participated), fidelity was 67%, the intervention dose delivered was 92 and 63%, and the intervention dose received was 68 and 49%. The total programme implementation was 58%. The increases in knowledge regarding the health status and work ability of the workers after the WHS were graded as 7.0 and 5.9, respectively. The satisfaction of the workers with the entire intervention was graded as 7.5. The perceived (future) effects on health status were graded as 6.3, and the effects on work ability were graded with a 5.2. The economic recession affected the workers as well as the occupational health service that enacted the implementation. Programme implementation was acceptable. Low reach, limited protocol adherence and modest engagement of the workers with respect

  20. Visual evaluation of beef tenderness by using surface structural ...

    African Journals Online (AJOL)

    Very low negative correlations were observed between colour and shear force (r = −0.242). Therefore, although it may be possible to judge meat colour by visual analysis, it does not appear possible to predict tenderness by colour judgment. There is potential for an experienced eye to predict tenderness by observing visual ...

  1. The beef tenderness model | Frylinck | South African Journal of ...

    African Journals Online (AJOL)

    age feedlot animals produced the most tender LL followed by the B-age pasture and A-age feedlot which was similar to the AB-age pasture. A-age pasture animals produced the least tender LL steaks. The calpain proteolytic system played a ...

  2. A design methodology to reduce waste in the construction process

    Institute of Scientific and Technical Information of China (English)

    AndrewN.BALDWIN; SimonA.AUSTIN; AndrewKEYS

    2003-01-01

    This paper describes a conceptual tool to enable construction professional to identify where waste is generated during the construction of buildings and address how it can be reduced. It allows an improvement in the waste management practices on site by forecasting future waste types and volumes. It will reduce waste volumes on site through identification of wasteful design practices. The tool contributes to all stages of design and construction. At the Concept Stage of Design the proposed methodology provides a framework for reducing waste through better informed decisions. At the Detailed Design Stage it gives a methodology to address the areas of concern and provide focused information to aid the reduction of waste through informed design decisions. During construction it provides a tool to predict waste types arising on site thus allowing a system of proaclive waste management that will aid skip segregation strategies leading to improved waste recycling and waste reuse.

  3. The integration of price/cost modelling and construction planning - the automated generation of construc­tion operation

    Directory of Open Access Journals (Sweden)

    P. A. Bowen

    1997-07-01

    Full Text Available The fact that traditional price/cost models are unrelated to the construction process renders them largely unsuited to the provision of meaningful price/cost advice. The nature and lengthiness of the construction planning process has precluded its incorporation into price/cost modelling during the pre-tender phase of the traditional building procurement process. The nub of the modelling problem has been how to integrate the complex process of construction planning into the pre-tender price/cost modelling process. In this paper the authors propose the synthesis of artificial intelligence techniques and construction planning techniques, resulting in a conceptual framework for a network-based cost modelling system for use by quantity surveyors in the cost modelling of buildings.

  4. To tender, re-negotiate or partner: Strategies for contracting service companies

    International Nuclear Information System (INIS)

    Gouldie, T.A.

    1994-01-01

    The contracting of oilfield service companies by petroleum exploration and production operating companies is different than the contracting of civil engineering, construction or other project-oriented contractors. The relationship between operating companies and oilfield service companies has had a long and unique history which has evolved since the first oil wells were drilled over a century ago. The process of contracting service companies by operating companies for petroleum exploration and production work can be split into three distinct stages: (1) decide what it is that should be contracted out and what should be kept in house; (2) determine the method to use to select the contractor(s) to perform the work; and (3) agree to the contractual structure to best reflect the relationship the operating company and the service company with to initiate and maintain. As there are ongoing changes to the business structures and corporate thinking of both operating and service companies, there are also evolving changes to what are considered core businesses and the methods of selecting and contracting service companies by operating companies. Operating companies are recognizing the high costs of tendering for contractor services in terms of personnel time and administrative effort, and are relying more on negotiating and rolling-over existing contracts with their suitable, capable contractors. Partnering, in its many forms and levels, is increasingly being recognized as a useful method to get better work done at cheaper overall costs

  5. Compliance as process: Work safety in the Chinese construction industry

    NARCIS (Netherlands)

    Li, Na

    2016-01-01

    China is facing a key challenge of achieving compliance in many regulatory areas. Responding to such issue, this research reports on an exploratory empirical study of how the regulated construction businesses comply with work safety rules in China. Building on the existing literature, it develops a

  6. Competing sovereignties, contested processes : The politics of food sovereignty construction

    NARCIS (Netherlands)

    C. McGee Schiavoni (Christina)

    2014-01-01

    textabstractThis study provides a preliminary theoretical and empirical exploration into how ‘competing sovereignties’ are shaping the political construction of food sovereignty—broadly defined as ‘the right of peoples to healthy and culturally appropriate food produced through ecologically sound

  7. Momentum Concept in the Process of Knowledge Construction

    Science.gov (United States)

    Ergul, N. Remziye

    2013-01-01

    Abstraction is one of the methods for learning knowledge with using mental processes that cannot be obtained through experiment and observation. RBC model that is based on abstraction in the process of creating knowledge is directly related to mental processes. In this study, the RBC model is used for the high school students' processes of…

  8. Working capital management in the process of financial support of investment and construction projects and of the construction material industry

    Science.gov (United States)

    Danilochkina, Nadezhda; Lukmanova, Inessa; Roshchina, Olga; Voytolovskiy, Nikolay

    2018-03-01

    The article presents the analysis of working capital in the process of financial support of high-rise construction investment projects. The factors influencing the choice of the working capital management model were analyzed, the reasons of the change in the requirement for the values of current assets in the process of construction of high-rise facilities were determined. The author has developed the scheme of interrelation between production, operational and financial activity cycles of enterprises implementing investment projects of unique buildings and structures and made a comparative description of their financing sources.

  9. Drug tendering: drug supply and shortage implications for the uptake of biosimilars

    Directory of Open Access Journals (Sweden)

    Dranitsaris G

    2017-09-01

    impact on global health care spending and should result in overall savings. However, the use of tendering to maximize the potential benefits of biosimilars has varied across the world. Therefore, the objectives of this review are to examine the drug-tendering process and its implications on drug supply and drug shortages, as well as to describe biosimilars and how tendering may influence their uptake. Keywords: biosimilars, drug shortages, drug supply, small-molecule drugs, tendering

  10. Constructing topic models of Internet of Things for information processing.

    Science.gov (United States)

    Xin, Jie; Cui, Zhiming; Zhang, Shukui; He, Tianxu; Li, Chunhua; Huang, Haojing

    2014-01-01

    Internet of Things (IoT) is regarded as a remarkable development of the modern information technology. There is abundant digital products data on the IoT, linking with multiple types of objects/entities. Those associated entities carry rich information and usually in the form of query records. Therefore, constructing high quality topic hierarchies that can capture the term distribution of each product record enables us to better understand users' search intent and benefits tasks such as taxonomy construction, recommendation systems, and other communications solutions for the future IoT. In this paper, we propose a novel record entity topic model (RETM) for IoT environment that is associated with a set of entities and records and a Gibbs sampling-based algorithm is proposed to learn the model. We conduct extensive experiments on real-world datasets and compare our approach with existing methods to demonstrate the advantage of our approach.

  11. Constructing Topic Models of Internet of Things for Information Processing

    Science.gov (United States)

    Xin, Jie; Cui, Zhiming; Zhang, Shukui; He, Tianxu; Li, Chunhua; Huang, Haojing

    2014-01-01

    Internet of Things (IoT) is regarded as a remarkable development of the modern information technology. There is abundant digital products data on the IoT, linking with multiple types of objects/entities. Those associated entities carry rich information and usually in the form of query records. Therefore, constructing high quality topic hierarchies that can capture the term distribution of each product record enables us to better understand users' search intent and benefits tasks such as taxonomy construction, recommendation systems, and other communications solutions for the future IoT. In this paper, we propose a novel record entity topic model (RETM) for IoT environment that is associated with a set of entities and records and a Gibbs sampling-based algorithm is proposed to learn the model. We conduct extensive experiments on real-world datasets and compare our approach with existing methods to demonstrate the advantage of our approach. PMID:25110737

  12. 31 CFR 501.703 - Overview of civil penalty process and construction of rules.

    Science.gov (United States)

    2010-07-01

    ... process and construction of rules. (a) The administrative process for enforcing TWEA sanctions programs... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Overview of civil penalty process and construction of rules. 501.703 Section 501.703 Money and Finance: Treasury Regulations Relating to Money and...

  13. Strategy Guideline: Application of a Construction Quality Process to Existing Home Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, D.; Del Bianco, M.

    2013-08-01

    The Home Innovation Research Labs developed a construction quality process for new and existing high performance homes (HPH) in which high performance goals are established, specifications to meet those goals are defined, and construction monitoring points are added to the construction schedule so that critical energy efficiency details are systematically reviewed, documented, and tested in a timely manner. This report follows the evolution of the construction quality process from its development for new homes, to its application in the construction of a high performance home with enhanced specifications, and its application in a crawlspace renovation.

  14. Strategy Guideline. Application of a Construction Quality Process to Existing Home Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, D. [Partnership for Home Innovation, Upper Marlboro, MD (United States); Del Bianco, M. [Partnership for Home Innovation, Upper Marlboro, MD (United States)

    2013-08-01

    The Partnership for Home Innovation developed a construction quality process for new and existing high performance homes (HPH) in which high performance goals are established, specifications to meet those goals are defined, and construction monitoring points are added to the construction schedule so that critical energy efficiency details are systematically reviewed, documented, and tested in a timely manner. This report follows the evolution of the construction quality process from its development for new homes, to its application in the construction of a high performance home with enhanced specifications, and its application in a crawlspace renovation.

  15. Construction and Arena Simulation of Grid M-Commerce Process

    OpenAIRE

    Danqing Li; Dan Chang

    2012-01-01

    With the rapid development and the wide use of mobile technology, m-commerce research has gradually become the focus of scholars. Difficulties exist in m-commerce, such as information sharing, business collaboration, and process reengineering. Grid management, a new managerial concept, has the potential of being a powerful weapon that affects the study on m-commerce process. This study systematically analyzes the traditional m-commerce process and its problems. On that basis, this paper const...

  16. Tender Notices | About IASc | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    ... Tender for works related to expansion to main building of Indian Academy of ... for building Hostel Block at Indian Academy of Sciences Fellows Residency, ... the Three Science Academies of India on the teaching of the theory of evolution

  17. Beef tenderness improvement by dietary vitamin D3 supplementation in the last stage of fattening of cattle

    Directory of Open Access Journals (Sweden)

    Półtorak Andrzej

    2017-03-01

    Full Text Available Tenderness is the most important characteristic of meat, determining consumer approval. There are numerous methods of its improvement, although of diverse effectiveness. addition of vitamin D3 to the feed for a short period before slaughter (7–10 days is one of the natural ways to enhance the tenderness. Vitamin D3 is responsible for Ca2+ mobilisation in serum and increase in activity of proteolytic enzymes belonging to calpains, which results in significant improvement of beef tenderness and reduction of ageing time. The use of vitamin D3 is an application tool determining tenderness improvement of beef with substantial reduction in processing costs. Moreover, shorter post mortem ageing process will exceed the retail display time, which will consequently reduce losses due to unsold meat being returned from shops to the manufacturers. Based on the results of studies conducted over the last 15 years, this paper presents the possibility and the effects of the use of vitamin D3 to improve beef tenderness.

  18. Survey of billing and coding for counterstrain tender points.

    Science.gov (United States)

    Snider, Karen T; Johnson, Jane C

    2012-06-01

    The names of certain counterstrain tender points are incongruent with their physical locations because of an assumption that these points are reflective of dysfunction in neighboring body areas. Because the body area that is physically examined does not always match the body region in which somatic dysfunction is diagnosed for these tender points, it is not always clear which evaluation and management service codes should be used for billing physician services. To assess the attitudes of osteopathic physicians toward the billing and coding of incongruent counterstrain tender points. Physician members of the American Academy of Osteopathy who use counterstrain in clinical practice were surveyed regarding the body area that they would physically examine when assessing for incongruent tender points and, if tender points were present, the body regions to which they would assign somatic dysfunction for billing and coding purposes. Physician responses were categorized as indicating a structural approach (ie, reflective of anatomic location) or a functional approach (ie, reflective of dysfunction in neighboring body areas) to tender point examination and treatment. Associations between sex, specialty, and years in practice with the approach chosen were also examined. Of 175 physicians who responded to the survey, 156 met the study criteria. Respondents were primarily board-certified in neuromusculoskeletal medicine/osteopathic manipulative medicine (98 [63%]), special proficiency in osteopathic manipulative medicine (30 [19%]), or family practice/family practice and osteopathic manipulative treatment (94 [60%]). Ninety percent of physicians predominantly chose responses indicating a structural approach to the physical examination of tender points and 21% predominantly chose responses indicating a functional approach to somatic dysfunction diagnosis. There were inconsistencies among individual respondents regarding the type of approach chosen for a single tender point. For

  19. NASA Construction of Facilities Validation Processes - Total Building Commissioning (TBCx)

    Science.gov (United States)

    Hoover, Jay C.

    2004-01-01

    Key Atributes include: Total Quality Management (TQM) System that looks at all phases of a project. A team process that spans boundaries. A Commissioning Authority to lead the process. Commissioning requirements in contracts. Independent design review to verify compliance with Facility Project Requirements (FPR). Formal written Commissioning Plan with Documented Results. Functional performance testing (FPT) against the requirements document.

  20. Processing arrangements for constructing representations of parts of bodies

    International Nuclear Information System (INIS)

    Watson, D.M.

    1981-01-01

    An improved method is described for processing the data signals obtained during computerised tomography. The technique is an extension of the back projection method, but in the present embodiment is applied to fan shaped X-ray beams. Block diagrammatic circuits are given and algorithms are presented to describe the signal processing in terms of matrix manipulation. (U.K.)

  1. Cognitive aging on latent constructs for visual processing capacity

    DEFF Research Database (Denmark)

    Nielsen, Simon; Wilms, Inge Linda

    2015-01-01

    processing speed compared to visual short-term memory (VSTM) capacity (Model 2). These results are consistent with some studies reporting selective ageing effects on processing speed, and inconsistent with other studies reporting ageing effects on both processing speed and VSTM capacity. In the discussion we......We examined the effects of normal ageing on visual cognition in a sample of 112 healthy adults aged 60-75. A testbattery was designed to capture high-level measures of visual working memory and low-level measures of visuospatial attention and memory. To answer questions of how cognitive ageing...

  2. 17 CFR 240.14e-1 - Unlawful tender offer practices.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Unlawful tender offer... Securities Exchange Act of 1934 Regulation 14e § 240.14e-1 Unlawful tender offer practices. As a means... section 14(e) of the Act, no person who makes a tender offer shall: (a) Hold such tender offer open for...

  3. 49 CFR 230.90 - Draw gear between steam locomotive and tender.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Draw gear between steam locomotive and tender. 230... Steam Locomotives and Tenders Draw Gear and Draft Systems § 230.90 Draw gear between steam locomotive and tender. (a) Maintenance and testing. The draw gear between the steam locomotive and tender...

  4. 49 CFR 230.100 - Defects in tender truck axles and journals.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defects in tender truck axles and journals. 230... Steam Locomotives and Tenders Running Gear § 230.100 Defects in tender truck axles and journals. (a... wheel seats that is more than 1/8 of an inch in depth. (b) Tender truck journal condemning defects...

  5. An environmental impact causal model for improving the environmental performance of construction processes

    OpenAIRE

    Fuertes Casals, Alba; Casals Casanova, Miquel; Gangolells Solanellas, Marta; Forcada Matheu, Núria; Macarulla Martí, Marcel; Roca Ramon, Xavier

    2013-01-01

    Despite the increasing efforts made by the construction sector to reduce the environmental impact of their processes, construction sites are still a major source of pollution and adverse impacts on the environment. This paper aims to improve the understanding of construction-related environmental impacts by identifying on-site causal factors and associated immediate circumstances during construc- tion processes for residential building projects. Based on the literature and focus g...

  6. Construction of experimental HMA test sections in order to monitor the compaction process

    NARCIS (Netherlands)

    ter Huerne, Henderikus L.; Molenaar, A.A.A.; van de Ven, M.F.C.

    2003-01-01

    For getting better understanding about the process of HMA compaction, a test section was constructed while the governing process parameters, like; compaction progress, temperature of the material at which activities were employed, equipment properties and meteorological circumstances, were

  7. Social construction as process: some new possibilities for research and development

    NARCIS (Netherlands)

    Hosking, D.M.

    1999-01-01

    Here we outline one variant of social constructionism - one that emphasises social ontologys as constructed in ongoing co-ordinations of act and supplement. We stress that such processes may be constructed both in written and spoken words, in non-verbal actions and artefacts. Relational processes

  8. Construction Process of the Length of [cube root of 2] by Paper Folding

    Science.gov (United States)

    Guler, Hatice Kubra; Gurbuz, Mustafa Cagri

    2018-01-01

    The main purpose of this study is to investigate mathematics teachers' mathematical thinking process while they are constructing the length of [cube root of 2] by paper folding. To carry out this aim, two teachers--who are PhD. students--were interviewed one by one. During the construction, it was possible to observe the consolidation process of…

  9. Construction and updating of event models in auditory event processing.

    Science.gov (United States)

    Huff, Markus; Maurer, Annika E; Brich, Irina; Pagenkopf, Anne; Wickelmaier, Florian; Papenmeier, Frank

    2018-02-01

    Humans segment the continuous stream of sensory information into distinct events at points of change. Between 2 events, humans perceive an event boundary. Present theories propose changes in the sensory information to trigger updating processes of the present event model. Increased encoding effort finally leads to a memory benefit at event boundaries. Evidence from reading time studies (increased reading times with increasing amount of change) suggest that updating of event models is incremental. We present results from 5 experiments that studied event processing (including memory formation processes and reading times) using an audio drama as well as a transcript thereof as stimulus material. Experiments 1a and 1b replicated the event boundary advantage effect for memory. In contrast to recent evidence from studies using visual stimulus material, Experiments 2a and 2b found no support for incremental updating with normally sighted and blind participants for recognition memory. In Experiment 3, we replicated Experiment 2a using a written transcript of the audio drama as stimulus material, allowing us to disentangle encoding and retrieval processes. Our results indicate incremental updating processes at encoding (as measured with reading times). At the same time, we again found recognition performance to be unaffected by the amount of change. We discuss these findings in light of current event cognition theories. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  10. Study on the Quality Management of Building Electricity Engineering Construction in the Whole Process

    Science.gov (United States)

    Qin, Minwu

    2018-05-01

    With the progress of science and technology, people use more and more types of electrical equipment and the functions are more and more complicated, which put forward higher requirements on the construction quality of electrical construction. If you ignore some of the necessary quality requirements and violate the specification of operation in the process of building electrical construction, that will bring great security risks and resulting in huge economic losses, even endanger personal safety. Manage and control construction quality of building electrical construction must be carried out throughout the whole process of construction. According to the construction characteristics of building electrical construction, this article analyze the construction details that are easy to be ignored but very important in the construction, based on management theory and put forward the methods of quality management in the whole process of building electrical construction. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text.

  11. Construction and Updating of Event Models in Auditory Event Processing

    Science.gov (United States)

    Huff, Markus; Maurer, Annika E.; Brich, Irina; Pagenkopf, Anne; Wickelmaier, Florian; Papenmeier, Frank

    2018-01-01

    Humans segment the continuous stream of sensory information into distinct events at points of change. Between 2 events, humans perceive an event boundary. Present theories propose changes in the sensory information to trigger updating processes of the present event model. Increased encoding effort finally leads to a memory benefit at event…

  12. Low cost materials of construction for biological processes: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-13

    The workshop was held, May 1993 in conjunction with the 15th Symposium on Biotechnology for Fuels and Chemicals. The purpose of this workshop was to present information on the biomass to ethanol process in the context of materials selection and through presentation and discussion, identify promising avenues for future research. Six technical presentations were grouped into two sessions: process assessment and technology assessment. In the process assessment session, the group felt that the pretreatment area would require the most extensive materials research due the complex chemical, physical and thermal environment. Discussion centered around the possibility of metals being leached into the process stream and their effect on the fermentation mechanics. Linings were a strong option for pretreatment assuming the economics were favorable. Fermentation was considered an important area for research also, due to the unique complex of compounds and dual phases present. Erosion in feedstock handling equipment was identified as a minor concern. In the technology assessment session, methodologies in corrosion analysis were presented in addition to an overview of current coatings/linings technology. Widely practiced testing strategies, including ASTM methods, as well as novel procedures for micro-analysis of corrosion were discussed. Various coatings and linings, including polymers and ceramics, were introduced. The prevailing recommendations for testing included keeping the testing simple until the problem warranted a more detailed approach and developing standardized testing procedures to ensure the data was reproducible and applicable. The need to evaluate currently available materials such as coatings/linings, carbon/stainless steels, or fiberglass reinforced plastic was emphasized. It was agreed that economic evaluation of each material candidate must be an integral part of any research plan.

  13. Constructive processes in skilled and less skilled comprehenders' memory for sentences.

    Science.gov (United States)

    Oakhill, J

    1982-02-01

    An experiment was carried out to investigate seven-eight-year-old children's memory for aurally presented sentences. A recognition-memory task was used to probe constructive memory processes in two groups differentiated by their ability at comprehending printed text. The recognition errors of both groups indicated that they constructed meanings implied by the original input sentences, whilst demonstrating poor memory for the syntactic form of the sentences. The tendency to construct meanings implied by the original input sentences was greater in children who scored higher on tests of reading comprehension of test. These results indicate that constructive memory processes are related to comprehension ability in young readers.

  14. PS-109 Barriers and facilitators to implementing drug changes caused by drug tenders and shortages

    DEFF Research Database (Denmark)

    Rishøj, Rikke Mie; Christrup, Lona Louring; Clemmensen, Marianne H

    2015-01-01

    . Purpose To identify barriers and facilitators for implementing drug changes due to drug tenders and shortages in Danish public hospitals. Material and methods Six focus group interviews were conducted at three hospitals in different regions of the country. At each hospital two focus group interviews were...... thematically through content analysis. Results Barriers Identified included: frequent changes of labelling, packages and drug names. Furthermore, implementing drug changes requires extra resources and finance. Technologies such as computerised physician order entry and barcode scanning systems were perceived...... as potential facilitators, but also as barriers in cases where the quality and implementation of the systems were not adequate. Facilitators included: hospital pharmacy services and lower drug prices. Furthermore recommendations on generic prescription, optimisation of the tendering process and support...

  15. Call for tender - Areva-Alstom: watershed in wind energy - Technological duel on the open sea

    International Nuclear Information System (INIS)

    Dupin, L.

    2012-01-01

    The author comments the answers to a call for tender made by the French government and concerning five offshore wind farm sites (Le Treport, Fecamp, Courseulles sur Mer, Saint-Brieuc and Saint-Nazaire). As they are present within the three consortiums, Areva and Alstom should provide the wind turbines. This would result in the construction by Alstom of two blade and mast factories and two turbine and pad factories. For both companies, this market of 500 to 600 turbines is an opportunity. Many jobs are at stake. They push themselves forward for their experience or their innovation capacity. But their wind turbines will be based on foreign (Spanish or German) technology

  16. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    International Nuclear Information System (INIS)

    Scott, D.E.; Pechmann, J.H.K.; Knox, J.N.; Estes, R.A.; McGregor, J.H.; Bailey, K.

    1988-12-01

    The Savannah River Ecology Laboratory has completed 10 years of ecological studies related to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site. This progress report examines water quality studies on streams peripheral to the DWPF construction site and examines the effectiveness of ''refuge ponds'' in ameliorating the effects of construction on local amphibians. Individual papers on these topics are indexed separately. 93 refs., 15 figs., 15 tabs

  17. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Scott, D.E.; Pechmann, J.H.K.; Knox, J.N.; Estes, R.A.; McGregor, J.H.; Bailey, K. (ed.)

    1988-12-01

    The Savannah River Ecology Laboratory has completed 10 years of ecological studies related to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site. This progress report examines water quality studies on streams peripheral to the DWPF construction site and examines the effectiveness of refuge ponds'' in ameliorating the effects of construction on local amphibians. Individual papers on these topics are indexed separately. 93 refs., 15 figs., 15 tabs. (MHB)

  18. Construction of a narrative network aimed at implementing inclusive processes

    Directory of Open Access Journals (Sweden)

    Francesca Salis

    2017-01-01

    Full Text Available The concept of inclusion in its complex aspects aimed at overcoming barriers to learning and involvement has led this research in university, in the light of special pedagogy and didactics, on the basis of inclusion index parameters, detecting the levels of integrated planning with the territory. The purpose of this study is not limited to disability and to special education needs but goes further than that encompassing isolation and/or exclusions. As far as the university system is concerned, it becomes significant to enquire about the inclusion process, in this case by means of a narrative approach, bearing in mind that organizational and learning models, together with access modes may give rise to social exclusion.Università e territorio: costruzione di una rete narrativa per l’implementazione dei processi inclusiviIl costrutto di inclusione nelle sue complesse sfaccettature mirate al superamento delle barriere all’apprendimento e alla partecipazione, ha guidato il presente lavoro di ricerca in ambito universitario alla luce della pedagogia e didattica speciale, sulla base dei parametri dell’Index for Inclusion, rilevando i livelli di progettazione integrata con il territorio. Il suo raggio di azione non si limita alla disabilità ma abbraccia tutti i bisogni educativi speciali, e l’isolamento, la marginalizzazione e/o le esclusioni che ne derivano. Rispetto al sistema universitario è rilevante interrogarsi sul processo di inclusione, in questo caso sulla base dell’approccio narrativo, preso atto che il modello organizzativo e le modalità di accesso e formative possono essere causa di esclusione formativa e sociale.

  19. 42 CFR 137.294 - What is the typical IHS environmental review process for construction projects?

    Science.gov (United States)

    2010-10-01

    ... SELF-GOVERNANCE Construction Nepa Process § 137.294 What is the typical IHS environmental review... impact on the environment, and therefore do not require environmental impact statements (EIS). Under current IHS procedures, an environmental review is performed on all construction projects. During the IHS...

  20. Safety and environmental process for the design and construction of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Brereton, S.J., LLNL

    1998-05-27

    The National Ignition Facility (NIF) is a U.S. Department of Energy (DOE) laser fusion experimental facility currently under construction at the Lawrence Livermore National Laboratory (LLNL). This paper describes the safety and environmental processes followed by NIF during the design and construction activities.

  1. Construction of quality-assured infant feeding process of care data repositories: Construction of the perinatal repository (Part 2).

    Science.gov (United States)

    García-de-León-Chocano, Ricardo; Muñoz-Soler, Verónica; Sáez, Carlos; García-de-León-González, Ricardo; García-Gómez, Juan M

    2016-04-01

    This is the second in a series of two papers regarding the construction of data quality (DQ) assured repositories, based on population data from Electronic Health Records (EHR), for the reuse of information on infant feeding from birth until the age of two. This second paper describes the application of the computational process of constructing the first quality-assured repository for the reuse of information on infant feeding in the perinatal period, with the aim of studying relevant questions from the Baby Friendly Hospital Initiative (BFHI) and monitoring its deployment in our hospital. The construction of the repository was carried out using 13 semi-automated procedures to assess, recover or discard clinical data. The initial information consisted of perinatal forms from EHR related to 2048 births (Facts of Study, FoS) between 2009 and 2011, with a total of 433,308 observations of 223 variables. DQ was measured before and after the procedures using metrics related to eight quality dimensions: predictive value, correctness, duplication, consistency, completeness, contextualization, temporal-stability, and spatial-stability. Once the predictive variables were selected and DQ was assured, the final repository consisted of 1925 births, 107,529 observations and 73 quality-assured variables. The amount of discarded observations mainly corresponds to observations of non-predictive variables (52.90%) and the impact of the de-duplication process (20.58%) with respect to the total input data. Seven out of thirteen procedures achieved 100% of valid births, observations and variables. Moreover, 89% of births and ~98% of observations were consistent according to the experts׳ criteria. A multidisciplinary approach along with the quantification of DQ has allowed us to construct the first repository about infant feeding in the perinatal period based on EHR population data. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Modified-atmosphere storage under subatmospheric pressure and beef quality: II. Color, drip, cooking loss, sarcomere length, and tenderness

    NARCIS (Netherlands)

    Smulders, F.J.M.; Hiesberger, J.; Hofbauer, P.; Dogl, B.; Dransfield, E.

    2006-01-01

    Beef has a requirement for refrigerated storage up to 14 d to achieve adequate aging and a tender product. To achieve this aging with little spoilage and no surface drying, vacuum packaging is attractive, because it is inherently simple and offers a clear indication to the packer when the process

  3. Measurements of the radioactivity of power plant by-products processed into construction materials

    International Nuclear Information System (INIS)

    Marcinkowski, S.A.; Dudelewski, H.A.

    1992-01-01

    The subject of the recycling of residual products comprising, inter alia, fly ash and slags accuring from the combustion of black and brown coal in modern coal dust boilers in the power industry has been topical for a number of years. Numerous discussions and articles in technical periodicals and the daily press have revolved around the problem of the radioactivity of construction materials or construction elements obtained from fly ash or slags of power plant. In Poland, this was a forbidden subject until the publication in 1980 by the Warsaw institute of construction technology of standard no. 234 entitled: 'Recommendations for establishing the natural radioactivity of products processed into construction materials'. (orig.) [de

  4. Construction the organizational structure of the MTE oriented on the business-processes management

    OpenAIRE

    Kohut, Y.

    2011-01-01

    The methodical recommendations for the construction the organizational structure of the MTE oriented on the business-processes management has been developed by substantiating of basic works, maintenance, sequence and orientation, and also methods and receptions of their realization.

  5. An evaluation of Mexican transportation planning, finance, implementation, and construction processes.

    Science.gov (United States)

    2009-10-01

    This research examined the legal, financial, institutional and policy processes that Mexico uses to plan, finance, : construct, and implement its transportation network. It documents through twelve case studies the state of the : practice in planning...

  6. The life cycle cost of a building from the point of view of environmental criteria of selecting the most beneficial offer in the area of competitive tendering

    Directory of Open Access Journals (Sweden)

    Grzyl Beata

    2017-01-01

    Full Text Available The article analyses environmental and ecological criteria of selecting the most beneficial offer in the aspect of LCC. Construction works contracts and the potential method of defining the above criteria, among others, is pondered on (for example by the recommendation of a material, which is supposed to be used, a ban on substances that are harmful for human health as well for the environment. In the relation to the above, it is necessary to define technical parameters that have an impact on the environment, for example the level of pollution and noise emission, electricity and water consumption, or stating the minimal involvement of a processed ingredient. In addition the article presents also an account of the life cycle cost of a building from the point of view of environmental criteria constituting an element of selecting the most beneficial offer in the area of competitive tendering.

  7. Semisubmersible rigs attractive for tender-assisted drilling

    Energy Technology Data Exchange (ETDEWEB)

    Tranter, P. (Sedco Forex, Aberdeen (United Kingdom))

    1994-09-19

    Tender-assisted drilling (TAD) involves the use of tender support vessel (TSV) during the drilling phase of platform development to provide drilling utilities to the platform-mounted drilling package. The TSV provides facilities such as mud mixing, storage, pumping, bulk storage, hotel accommodations, and power. Thus, the platform topsides and jacket weight and size can be smaller and less expensive. The paper discusses the advantages and disadvantages of TAD, then describes the TAD vessel, semisubmersible, platform cost savings, accommodations, drilling and workovers, and field experience.

  8. Evaluating the Impact of Risk on Contractor’s Tender Figure in Public Buildings Projects in Northern Nigeria

    Directory of Open Access Journals (Sweden)

    L. O. Oyewobi

    2012-01-01

    Full Text Available It has become almost impossible to have projects completed within the initial cost and time in Nigeria; this is as a result of many factors the construction industry is being plagued with ranging from estimating risk to time and cost overruns. The construction industry is widely associated with a high degree of risk and uncertainty due to the nature of its operating heterogeneous environment. The paper aimed at evaluating the impact of estimating risk on contractor’s tender sum with a view of ensuring efficient delivery of projects in the Northern part of Nigeria. A survey was conducted using questionnaire and a total of four headings of risk factors were identified. Research findings showed defects in design, inflation, contractor’s competence and political uncertainty as well as changes in government had greatest impact on contractor’s tender figure whereas likely trend in wages rates over the period, excessive approval procedure in administration government department, unavailability of sufficient amount of unskilled labor and technical manpower and resources of the company were the most significant factors to be considered by contractors when estimating the pricing risk. The paper recommends that construction professionals should identify and adequately quantify project estimating risk factors. Adding a risk premium to quotation and time estimation has to be supported by governmental owner organizations and other agencies in the local construction sector. Competent contractors should be allowed to tender so as to see the incidence of these estimating risks as an important aspect that requires attention while evaluating contractor’s tender sum.

  9. Proposal to negotiate a contract, without competitive tendering, for the supply and installation of pipework for the new hostel

    CERN Document Server

    2005-01-01

    This document concerns the proposal to negotiate a contract for the supply and installation of new piping as preparatory work for the construction of a third on-site hostel. For the reasons explained in this document, the Finance Committee is invited to approve a contract with the SERVICES INDUSTRIELS DE GENEVE (SIG) (CH), without competitive tendering, for the supply and installation of new piping for an amount not exceeding 700 000 Swiss francs, not subject to revision.

  10. Data processing project management in the construction of plants and power stations

    International Nuclear Information System (INIS)

    Huelsen, H.; Hayen, W.

    1987-01-01

    The requirements of project management in plant construction i.e. basic data, supervision and control became more and more detailed. These requirements can only satisfactorily be met with the help of data processing. Piping design requires up to 50% of the whole amount of engineering in design and management of plant construction. We present data processing project management system which explains the connections of single aspects. Its connections consists of: collection of basic data, plant design and installation, supervision of planning and installation, planning and calculation, collection, use, administration and approval of plan data, procurement material, construction of the model (1:25), and installation. (orig.) [de

  11. An empirical analysis of strategy implementation process and performance of construction companies

    Science.gov (United States)

    Zaidi, F. I.; Zawawi, E. M. A.; Nordin, R. M.; Ahnuar, E. M.

    2018-02-01

    Strategy implementation is known as action stage where it is to be considered as the most difficult stage in strategic planning. Strategy implementation can influence the whole texture of a company including its performance. The aim of this research is to provide the empirical relationship between strategy implementation process and performance of construction companies. This research establishes the strategy implementation process and how it influences the performance of construction companies. This research used quantitative method approached via questionnaire survey. Respondents were G7 construction companies in Klang Valley, Selangor. Pearson correlation analysis indicate a strong positive relationship between strategy implementation process and construction companies’ performance. The most importance part of strategy implementation process is to provide sufficient training for employees which directly influence the construction companies’ profit growth and employees’ growth. This research results will benefit top management in the construction companies to conduct strategy implementation in their companies. This research may not reflect the whole construction industry in Malaysia. Future research may be resumed to small and medium grades contractors and perhaps in other areas in Malaysia.

  12. Environmental criteria in the Spanish Public Works Procurement Process

    OpenAIRE

    Fuentes Bargues, José Luis; González-Cruz, María-Carmen; González-Gaya, Cristina

    2017-01-01

    [EN] Green Public Procurement (GPP) is defined as a process of contracting products, services, and works with the least possible damage to the environment during their life cycle. In order to improve the knowledge about GPP, a study of the use of environmental tendering criteria in the Spanish public construction sector has been performed. The results of this study show that the use of environmental criteria in Spanish public sector construction procurement is low in comparison to a certain g...

  13. Environmental Criteria in the Spanish Public Works Procurement Process

    OpenAIRE

    José Luis Fuentes-Bargues; Mª Carmen González-Cruz; Cristina González-Gaya

    2017-01-01

    Green Public Procurement (GPP) is defined as a process of contracting products, services, and works with the least possible damage to the environment during their life cycle. In order to improve the knowledge about GPP, a study of the use of environmental tendering criteria in the Spanish public construction sector has been performed. The results of this study show that the use of environmental criteria in Spanish public sector construction procurement is low in comparison to a certain group ...

  14. Issues and measures in the design process from the perspective of risk management of construction projects. study of power plant construction projects accident cases

    International Nuclear Information System (INIS)

    Iwahara, Hirohiko; Shiraki, Wataru; Inomo, Hitoshi; Hasegawa, Syuichi

    2015-01-01

    Construction of power plants, foundation work, consisting of a wide variety of construction work, such as plant equipment work. And, civil engineering, technician electrical such as different engineering field, is a comprehensive construction project that works for the design conditions of the structure. However, if the cooperation design conditions is not sufficient, as a construction project, the optimal structures may not be said to have been built. As a result, total cost or increased, including the initial cost of the end construction projects, it is be a cause of the accident. Previous studies, plant equipment construction, is related to safety management and risk of foundation work such as individual construction were many. In this paper, as an example the power plant construction, and performs the following discussion from the point of view of risk management of large-scale construction projects that these individual construction work together with each other. The importance of design conditions cooperation, (1) 'Challenges and countermeasures of ordering method of construction projects', to verify from the (2) 'actually happened substation foundation displacement accident'. And on whether or not the construction project order institutions can be involved in the design from the site preparation stage, we study (3) for 'construction work scope and risk control the construction project ordering institutions to implement' the risk to the natural disaster (earthquake). From these, we describe the challenges and measures in the construction project of the design process. (author)

  15. The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists

    Directory of Open Access Journals (Sweden)

    Rachel Russell

    2018-01-01

    Full Text Available Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people.

  16. The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists.

    Science.gov (United States)

    Russell, Rachel; Ormerod, Marcus; Newton, Rita

    2018-01-01

    Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people.

  17. A Study on the Analysis of CO2 Emissions of Apartment Housing in the Construction Process

    Directory of Open Access Journals (Sweden)

    Jonggeon Lee

    2018-01-01

    Full Text Available Recent research in the construction industry has focused on the reduction of CO2 emission using quantitative assessment of building life. However, most of this research has focused on the operational stage of a building’s life cycle. Few comprehensive studies of CO2 emissions during building construction have been performed. The purpose of this study is to analyze the CO2 emissions of an apartment housing during the construction process. The quantity of CO2 emissions associated with the utilization of selected building materials and construction equipment were used to estimate the CO2 emissions related to the apartment housing life cycle. In order to set the system boundary for the construction materials, equipment, and transportation used, 13 types of construction work were identified; then the CO2 emissions produced by the identified materials were calculated for each type of construction work. The comprehensive results showed that construction work involving reinforced concrete accounted for more than 73% of the total CO2 emissions. The CO2 emissions related to reinforced concrete work was mainly due to transportation from the supplier to the construction site. Therefore, at the time that reinforced concrete is being supplied, shipping distance and fuel economy management of concrete transportation vehicles should be considered thoroughly for significant reduction of CO2 emissions.

  18. 48 CFR 47.104-1 - Government rate tender procedures.

    Science.gov (United States)

    2010-10-01

    ... and 13712 rates are published in Government rate tenders and apply to shipments moving for the account of the Government on— (1) Commercial bills of lading endorsed to show that total transportation charges are assignable to, and will be reimbursed by, the Government (see the clause at 52.247-1...

  19. More cost effectiveness from public tendering of energy

    International Nuclear Information System (INIS)

    Smith, E.

    2006-01-01

    From the results of an energy market analysis it appears that parties which are obliged to tender for energy contracts do not make the most of it. Timing is crucial in a liberalized market. Contracting in spring seems to deliver the best prices for energy in combination with tailor-made contracts [nl

  20. A BPMN-based process map for the design and construction of façades

    Directory of Open Access Journals (Sweden)

    Eleanor Voss

    2013-12-01

    Full Text Available Corresponding author: Eleanor Voss, Glass and Façade Technology Research Group, Department of Engineering, University of Cambridge, Trumpington Street, Cambridge, UK. E-mail: ev236@cam.ac.uk Process mapping can lead to significant efficiency and quality improvements in construction engineering and is an ideal basis for developing IT support tools. The increasing complexity and multidisciplinary nature of façade design and construction suggest that a process map would be beneficial in this sector of the construction industry, but it has received limited attention to date. This paper presents a verified process map of the façade design and construction process. The map is the first of its kind to represent, in detail, the whole process relevant to all façade types, from commencement of the façade consultant's and contactor's participation, to the end of their involvement. The paper describes the process by which the mapping notation was selected, followed by the development and verification of the process map, including testing in two independent research projects. The BuildingSMART's BPMN notation is found to have superior system features and comprehensibility for this application and the resulting process map is easy to interpret and verify by industry experts. The trialling of the map in the two research projects indicate that the map is a useful tool for assessing process improvements in the façades sector.

  1. A BPMN-Based Process Map for the Design and Construction of Façades

    Directory of Open Access Journals (Sweden)

    Eleanor Voss

    2013-12-01

    Full Text Available Process mapping can lead to significant efficiency and quality improvements in construction engineering and is an ideal basis for developing IT support tools. The increasing complexity and multidisciplinary nature of façade design and construction suggest that a process map would be beneficial in this sector of the construction industry, but it has received limited attention to date. This paper presents a verified process map of the façade design and construction process.  The map is the first of its kind to represent, in detail, the whole process relevant to all façade types, from commencement of the façade consultant’s and contactor’s participation, to the end of their involvement. The paper describes the process by which the mapping notation was selected, followed by the development and verification of the process map, including testing in two independent research projects. The BuildingSMART’s BPMN notation is found to have superior system features and comprehensibility for this application and the resulting process map is easy to interpret and verify by industry experts. The trialling of the map in the two research projects indicate that the map is a useful tool for assessing process improvements in the façades sector.

  2. Imagining the future: evidence for a hippocampal contribution to constructive processing.

    Science.gov (United States)

    Gaesser, Brendan; Spreng, R Nathan; McLelland, Victoria C; Addis, Donna Rose; Schacter, Daniel L

    2013-12-01

    Imagining future events and remembering past events rely on a common core network, but several regions within this network--including the hippocampus--show increased activity for imagining future events compared to remembering past events. It remains unclear whether this hippocampal activity reflects processes related to the demands of constructing details retrieved across disparate episodic memories into coherent imaginary events, encoding these events into memory, novelty detection, or some combination of these processes. We manipulated the degree of constructive processing by comparing activity associated with the initial construction of an imagined scenario with the re-construction of an imagined scenario (imagine vs. re-imagine). After accounting for effects of novelty and subsequent memory, we found that a region in the hippocampus was preferentially activated for newly constructed imagined events compared with re-imagined events. Our results suggest that the hippocampus may support several distinct but related processes that are critical for imagining future events, and they also indicate that a particular region within posterior hippocampus may uniquely contribute to the construction of imagined future events. Copyright © 2013 Wiley Periodicals, Inc.

  3. Grounds for dispensing with public tender procedures in Government Contracting

    Directory of Open Access Journals (Sweden)

    P Bolton

    2006-01-01

    Full Text Available The Constitution of the Republic of South Africa1 provides that organs of state must comply with five principles when procuring goods or services: procurement procedures must be fair, equitable, transparent, competitive and cost-effective. In short, this means that organs of state should make use of competition when procuring goods or services. They should shop around and attract the maximum number of contractors who will participate in such competition. The aim should be the attainment of value for money, meaning, public money should be spent in an effective and efficient manner. Those who participate in competitions should also be treated fairly and without bias. In principle, no preferences should be afforded to different contractors; all contracting parties should have equal access to competition; some contractors should not be afforded more time for the preparation and submission of quotes or tenders than others; and the same information should be made available to all contracting parties. Government procurement procedures should further be transparent, meaning public or open. Thus, organs of state should not contract behind closed doors – government contracts should, as a rule, be advertised. Depending on the nature and value of a particular contract, the use of a public call for tenders is generally the best way to ensure compliance with the principles in the Constitution. By nature, a pubic call for tenders is open, it assists in the prevention of fraud and favouritism, and it ensures that the maximum number of contractors is approached to compete for a contract.Organs of state can also compare prices and quality and can contract with whoever offers the best deal. Most legislation therefore proceeds on the basis that procurement takes place by way of tendering. Generally, contracts above R200 000 are subject to public tender procedures. In certain instances, however, a public call for tenders may be inappropriate regardless of the high

  4. Relationships between sensory evaluations of beef tenderness, shear force measurements and consumer characteristics.

    Science.gov (United States)

    Van Wezemael, Lynn; De Smet, Stefaan; Ueland, Øydis; Verbeke, Wim

    2014-07-01

    The supply of tender beef is an important challenge for the beef industry. Knowledge about the profile of consumers who are more optimistic or more accurate in their tenderness evaluations is important for product development and beef marketing purposes. Central location tests of beef steaks were performed in Norway and Belgium (n=218). Instrumental and sensorial tenderness of three muscles from Belgian Blue and Norwegian Red cattle was reported. Consumers who are optimistically evaluating tenderness were found to be more often male, less food neophobic, more positive towards beef healthiness, and showed fewer concerns about beef safety. No clear profile emerged for consumers who assessed tenderness similar to shear force measurements, which suggests that tenderness is mainly evaluated subjectively. The results imply a window of opportunities in tenderness improvements, and allow targeting a market segment which is less critical towards beef tenderness. © 2013 Elsevier Ltd. All rights reserved.

  5. Tenderness of pre- and post rigor lamb longissimus muscle.

    Science.gov (United States)

    Geesink, Geert; Sujang, Sadi; Koohmaraie, Mohammad

    2011-08-01

    Lamb longissimus muscle (n=6) sections were cooked at different times post mortem (prerigor, at rigor, 1dayp.m., and 7 days p.m.) using two cooking methods. Using a boiling waterbath, samples were either cooked to a core temperature of 70 °C or boiled for 3h. The latter method was meant to reflect the traditional cooking method employed in countries where preparation of prerigor meat is practiced. The time postmortem at which the meat was prepared had a large effect on the tenderness (shear force) of the meat (PCooking prerigor and at rigor meat to 70 °C resulted in higher shear force values than their post rigor counterparts at 1 and 7 days p.m. (9.4 and 9.6 vs. 7.2 and 3.7 kg, respectively). The differences in tenderness between the treatment groups could be largely explained by a difference in contraction status of the meat after cooking and the effect of ageing on tenderness. Cooking pre and at rigor meat resulted in severe muscle contraction as evidenced by the differences in sarcomere length of the cooked samples. Mean sarcomere lengths in the pre and at rigor samples ranged from 1.05 to 1.20 μm. The mean sarcomere length in the post rigor samples was 1.44 μm. Cooking for 3 h at 100 °C did improve the tenderness of pre and at rigor prepared meat as compared to cooking to 70 °C, but not to the extent that ageing did. It is concluded that additional intervention methods are needed to improve the tenderness of prerigor cooked meat. Copyright © 2011 Elsevier B.V. All rights reserved.

  6. Radiation processing of polyethylene and polymethylmethacrylate for construction industry and architecture

    International Nuclear Information System (INIS)

    Knizhnik, E.I.; Gordienko, V.P.; Il'yenko, R.E.; Onisko, A.D.; AN Ukrainskoj SSR, Kiev. Inst. Fizicheskoj Khimii)

    1983-01-01

    Radiation processing of relief-forming molds made of filled high-density polyethylene enables them to be used for shaping concrete and ferroconcrete barrier constructions of buildings; radiation processing of polymethylmethacrylate in unit form makes it possible to produce large-size decorative elements of building interior. The subject is discussed and examples presented. (author)

  7. What impact has tendering had on trainees? Results of a national survey by British Association for Sexual Health and HIV Trainees' Collaborative for audit, research and quality improvement projects.

    Science.gov (United States)

    Wiggins, Helen; Hartley, Anna; Clarke, Emily; Foley, Elizabeth; Nandwani, Rak; Carlin, Elizabeth; Waters, Laura; Ahmed, Nadia

    2018-01-01

    In April 2013, local authorities gained responsibility for commissioning sexual health services in England. With many services going out to tender and resultant change in services or service provider, there is anecdotal evidence that this has impacted on the education, training and morale of genitourinary medicine (GUM) trainees. The aim of this study was to evaluate the impact of tendering on GUM trainees. An electronic survey designed by the British Association for Sexual Health and HIV Trainees' Collaborative for Audit, Research and Quality Improvement Projects (T-CARQ) was distributed to GUM trainees and newly appointed consultants. Eighty-two individuals responded (74% GUM trainees, 25% newly appointed consultants, 1% locum appointed for service). Sixty-three per cent (45/72) had experience of training within a service which was being tendered. Of these, 59% (24/41) felt their training was not considered during the tendering process and 20% (8/41) felt that it was. Forty-four per cent (18/41) felt adequately supported. Thirty per cent (12/40) reported active participation in the tendering process. On a scale of 0 (no impact) to 5 (major impact), the median score for impact of tendering on training was 2. The positive/negative impact of tendering on different training elements was rated: other than management experience the overall impact on all parameters was negative, namely morale, senior support and education. In conclusion, this survey describes the variable impact of service tendering on GUM training. Our recommendations for maintaining training standards despite tendering include actively involving trainees and education partners, inclusion of specialist GUM training in service specifications, development of guidance for commissioners and services for the management of GUM training within tendering.

  8. Logic of historical development of the formation process of architectural and construction solutions

    Directory of Open Access Journals (Sweden)

    Baranov Valeriy Aleksandrovich

    2014-05-01

    Full Text Available In research field of development processes of architectural and construction decisions (ACD there is already very considerable scientific, normative and technical material. And still in the end of the research boom in this area (the 90th many authors stated their weak return in practical design. High methodological potential gives understanding of the act of ACD formation as a special kind of activity, and its structure - as historical phenomenon that allows to put two main methodological principles in the basis of the research: the principle of activity and the principle of level organization of historically formed objects. As a result it was succeeded to reveal 6 main stages of historical development of ACD formation process and 6 levels of its modern organization. Origin stage - is the transition from animal to human construction and emergence of the first stage of ACD formation - a measurement. The reproductive stage is characterized by centuries-old reproduction of steady volume forms of constructions. At a composite stage professional presentation detaches external form of a construction from architectural and construction actions and techniques. There occurs transformation into a subject of architectural and construction activity and creation of a method of composition on this basis. At a constructive stage engineers are involved in construction process, there is a change of style of thinking, emergence of construction designs and emergence of a new function of ACD means of configuration, and, at last, final allocation and separation of architectural and construction design from construction. Technological stage is a product of industrialization of construction on which systematization is carried out not only on the level of subject, but also in respect to the operational contents that leads to emergence of ACD program formation. At the sixth, methodological stage of development of ASP, a leading way change of the ACD formation becomes a

  9. Pain sensitivity and pericranial tenderness in children with tension-type headache: a controlled study

    DEFF Research Database (Denmark)

    Soee, ABL; Skov, L; Kreiner, S

    2013-01-01

    To compare tenderness and pain sensitivity in children (aged 7-17 years) with tension-type headache (TTH) and healthy controls using total tenderness score (TTS), pressure pain threshold (PPT), and pain perceived at suprapressure pain threshold (supraPPT).......To compare tenderness and pain sensitivity in children (aged 7-17 years) with tension-type headache (TTH) and healthy controls using total tenderness score (TTS), pressure pain threshold (PPT), and pain perceived at suprapressure pain threshold (supraPPT)....

  10. MANAGEMENT PROCESS OF HEALTH AND SAFETY RISK IN THE NIGERIA CONSTRUCTION INDUSTRY

    OpenAIRE

    Akwu, Ifeoma Claris

    2017-01-01

    The study examined the state of health and safety risk management practices in the building sector of the construction industry with the objective to examine the health and safety risk management processes adopted by the construction industry in Nigeria; the study adopted the survey and case study research design. It employed the use of Delphi’s technique in the distribution of questionnaire and made use of chi-square analytical technique for the analysis of gathered data. The findings reveal...

  11. Perceptions Towards Non-Value-Adding Activities During The Construction Process

    Directory of Open Access Journals (Sweden)

    Ismail Haryati

    2016-01-01

    Full Text Available Non-value-adding activities are pure waste during the construction process. However, most of the construction practitioner does not realise that most of the activities performed during the construction process add no value to their project. A total of 375 numbers of questionnaires distributed to the Developer, Jabatan Kerja Raya, Consultants and Contractors. The study found that awareness by construction participants in Malaysia to take actions against non-value-adding activities during the construction process is relatively low. Through analysed by using the Pareto Chart, it has been found that defects and waiting time are two categories of non-value-adding activities that need to be prioritised by the industry. It is also found that non-value-adding activities most frequently occurred during structural and architectural work. This paper also reviewed on the causes of non-value-adding activities and discussed its effect towards time, cost, quality and productivity of the construction project. This paper is also important to give clearness and broader understandings on this form of waste other than material waste.

  12. A basis for modelling the costs of supplier selection: the economic tender quantity

    NARCIS (Netherlands)

    de Boer, L.; van Dijkhuizen, G.C.; Telgen, Jan

    2000-01-01

    In this paper, we consider the decision a purchaser must make regarding the number of suppliers that should be invited to submit a tender for a certain purchase. On the one hand, the costs of sending invitations to tender, the costs of evaluating the tenders received, and the costs of communicating

  13. 31 CFR 309.9 - Tenders; acceptance by the Secretary of the Treasury.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Tenders; acceptance by the Secretary... TREASURY BILLS § 309.9 Tenders; acceptance by the Secretary of the Treasury. At the time fixed for closing... acceptable prices offered and will make public announcement thereof those submitting tenders will be advised...

  14. 17 CFR 240.14e-5 - Prohibiting purchases outside of a tender offer.

    Science.gov (United States)

    2010-04-01

    ...(s); (iv) The intention of the offeror to make purchases pursuant to the foreign tender offer(s) is... consideration paid outside of the tender offer that is greater than the tender offer price; and (G) Purchases or... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Prohibiting purchases outside...

  15. 31 CFR 309.10 - Tenders; reservation of right to reject.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Tenders; reservation of right to... BILLS § 309.10 Tenders; reservation of right to reject. In considering the acceptance of tenders, the highest prices offered will be accepted in full down to the amount required, and if the same price appears...

  16. The Structured Process Modeling Method (SPMM) : what is the best way for me to construct a process model?

    NARCIS (Netherlands)

    Claes, J.; Vanderfeesten, I.T.P.; Gailly, F.; Grefen, P.W.P.J.; Poels, G.

    2017-01-01

    More and more organizations turn to the construction of process models to support strategical and operational tasks. At the same time, reports indicate quality issues for a considerable part of these models, caused by modeling errors. Therefore, the research described in this paper investigates the

  17. A review of risk management process in construction projects of developing countries

    Science.gov (United States)

    Bahamid, R. A.; Doh, S. I.

    2017-11-01

    In the construction industry, risk management concept is a less popular technique. There are three main stages in the systematic approach to risk management in construction industry. These stages include: a) risk response; b) risk analysis and evaluation; and c) risk identification. The high risk related to construction business affects each of its participants; while operational analysis and management of construction related risks remain an enormous task to practitioners of the industry. This paper tends towards reviewing the existing literature on construction project risk managements in developing countries specifically on risk management process. The literature lacks ample risk management process approach capable of capturing risk impact on diverse project objectives. This literature review aims at discovering the frequently used techniques in risk identification and analysis. It also attempts to identify response to clarifying the different classifications of risk sources in the existing literature of developing countries, and to identify the future research directions on project risks in the area of construction in developing countries.

  18. Improving Productivity in Building Construction – by Repetitions in Products, Processes, and Organisations

    DEFF Research Database (Denmark)

    Bekdik, Baris

    This thesis builds on several studies with connection to the lack of productivity in build-ing construction. It seeks to enhance the conditions for improving productivity in the fragmented building construction industry, by exploring how a modular thinking of products, processes and organisations...... can be reapplied on new building construction projects. Complexity theory is used for diagnosis and modularity theory for the remedy towards the high degree of complexity, which is seen as the root of unproductivity. De-sign Research Methodology is followed to structure and organise the different...... from the practitioner’s perspective. In the second part of the exploratory study, examples of the fragmented kinds of modu-lar applications around the world are compiled in order to demonstrate the inconsistent use, but still universal appeal that the approach carries with respect to building construc-tion...

  19. Desirable and undesirable future thoughts call for different scene construction processes.

    Science.gov (United States)

    de Vito, S; Neroni, M A; Gamboz, N; Della Sala, S; Brandimonte, M A

    2015-01-01

    Despite the growing interest in the ability of foreseeing (episodic future thinking), it is still unclear how healthy people construct possible future scenarios. We suggest that different future thoughts require different processes of scene construction. Thirty-five participants were asked to imagine desirable and less desirable future events. Imagining desirable events increased the ease of scene construction, the frequency of life scripts, the number of internal details, and the clarity of sensorial and spatial temporal information. The initial description of general personal knowledge lasted longer in undesirable than in desirable anticipations. Finally, participants were more prone to explicitly indicate autobiographical memory as the main source of their simulations of undesirable episodes, whereas they equally related the simulations of desirable events to autobiographical events or semantic knowledge. These findings show that desirable and undesirable scenarios call for different mechanisms of scene construction. The present study emphasizes that future thinking cannot be considered as a monolithic entity.

  20. Elementary Introduction to the Green Management of the Construction in Whole Process

    Science.gov (United States)

    Na), Wu Y. N.(Yun; Yu), Yan H. Y.(Hong; Jun), Huang Z. J.(Zhi

    Construction industries consume more energy resources than necessary. it is essential to establish a management system with all pollution problems resolved to construct green buildings. By applying the theory of whole life cycle, this paper divides the whole process of construction into four sub-phases, which will also be subdivided into more concrete working procedures. Based on this, a systematic framework is promoted for the green management of the construction, especially and creatively, considering the green aims as important as the traditional three aims-"quality aim, schedule aim and cost aim". This framework, adhering to the integration idea-"customers first, whole optimal", regards the green control and workflow as an organic whole in order to build green, sustainable and healthy architecture, and then provide a perfect guide and reference to the green management.

  1. Tender frequency and market concentration in balancing power markets

    Energy Technology Data Exchange (ETDEWEB)

    Knaut, Andreas; Obermueller, Frank; Weiser, Florian

    2017-01-15

    Balancing power markets ensure the short-term balance of supply and demand in electricity markets and their importance may increase with a higher share of fluctuating renewable electricity production. While it is clear that shorter tender frequencies, e.g. daily or hourly, are able to increase the efficiency compared to a weekly procurement, it remains unclear in which respect market concentration will be affected. Against this background, we develop a numerical electricity market model to quantify the possible effects of shorter tender frequencies on costs and market concentration. We find that shorter time spans of procurement are able to lower the costs by up to 15%. While market concentration decreases in many markets, we - surprisingly - identify cases in which shorter time spans lead to higher concentration.

  2. Tender frequency and market concentration in balancing power markets

    International Nuclear Information System (INIS)

    Knaut, Andreas; Obermueller, Frank; Weiser, Florian

    2017-01-01

    Balancing power markets ensure the short-term balance of supply and demand in electricity markets and their importance may increase with a higher share of fluctuating renewable electricity production. While it is clear that shorter tender frequencies, e.g. daily or hourly, are able to increase the efficiency compared to a weekly procurement, it remains unclear in which respect market concentration will be affected. Against this background, we develop a numerical electricity market model to quantify the possible effects of shorter tender frequencies on costs and market concentration. We find that shorter time spans of procurement are able to lower the costs by up to 15%. While market concentration decreases in many markets, we - surprisingly - identify cases in which shorter time spans lead to higher concentration.

  3. Construction of Vibronic Diabatic Hamiltonian for Excited-State Electron and Energy Transfer Processes.

    Science.gov (United States)

    Xie, Yu; Jiang, Shengshi; Zheng, Jie; Lan, Zhenggang

    2017-12-21

    Photoinduced excited-state electron and energy transfer processes are crucial in biological photoharvesting systems and organic photovoltaic devices. We discuss the construction of a diabatic vibronic Hamiltonian for the proper treatment of these processes involving the projection approach acting on both electronic wave functions and vibrational modes. In the electronic part, the wave function projection approach is used to construct the diabatic Hamiltonian in which both local excited states and charge-transfer states are included on the same footing. For the vibrational degrees of freedom, the vibronic couplings in the diabatic Hamiltonian are obtained in the basis of the pseudonormal modes localized on each monomer site by applying delocalized-to-localized mode projection. This systematic approach allows us to construct the vibronic diabatic Hamiltonian in molecular aggregates.

  4. Numerical construction of the p(fold) (committor) reaction coordinate for a Markov process.

    Science.gov (United States)

    Krivov, Sergei V

    2011-10-06

    To simplify the description of a complex multidimensional dynamical process, one often projects it onto a single reaction coordinate. In protein folding studies, the folding probability p(fold) is an optimal reaction coordinate which preserves many important properties of the dynamics. The construction of the coordinate is difficult. Here, an efficient numerical approach to construct the p(fold) reaction coordinate for a Markov process (satisfying the detailed balance) is described. The coordinate is obtained by optimizing parameters of a chosen functional form to make a generalized cut-based free energy profile the highest. The approach is illustrated by constructing the p(fold) reaction coordinate for the equilibrium folding simulation of FIP35 protein reported by Shaw et al. (Science 2010, 330, 341-346). © 2011 American Chemical Society

  5. Audit market competition: auditor changes and the impact of tendering

    OpenAIRE

    Beattie, V.; Fearnley, S.

    1998-01-01

    Increased competition within the external audit market and the recent phenomenon of audit tendering has renewed interest in the factors influencing auditor changes. In this paper, a questionnaire instrument is used to elicit perceptions of the factors which influence auditor-client realignments in this new environment and to indicate the relative influence of economic and behavioural factors. Positive, statistically significant associations were found between unsolicited approaches and the co...

  6. The Role of Quality in the Adjudication of Public Tenders

    Directory of Open Access Journals (Sweden)

    Geo Quinot

    2014-08-01

    Full Text Available The quality of the goods or services that government procures is obviously a very important consideration in deciding which supplier should be awarded a particular public tender. It follows that in the regulation of public procurement, particular attention should be given to the role of quality (also called functionality in the adjudication of public tenders and the final award decision. In South African public procurement law, the role of functionality in public tender adjudication has been a fairly controversial issue that has resulted in a continuing interaction between courts and law-makers on how and when quality should be assessed and should impact on the final award decision within the framework for public procurement found in section 217 of the Constitution. This contribution tracks the development of the role of functionality in public tender adjudication as prescribed by public procurement regulation since the enactment of the Preferential Procurement Policy Framework Act 5 of 2000, which spearheaded the development of contemporary public procurement regulation in South Africa. The analysis shows how the role of functionality has constantly changed since the enactment of the PPPFA and remains uncertain. This uncertainty relates to different interpretations of the constitutional requirements for public procurement primarily contained in section 217(1 of the Constitution. Whether functionality is used as a qualification criterion, an award criterion or both holds particular practical implications for both suppliers and contracting authorities. It is accordingly important to have certainty on this question. However, it cannot be said that the Constitution and section 217 in particular dictates one approach rather than another. The issue should thus be resolved with reference to the statutory scheme adopted under the PPPFA.

  7. Proposal for elicitation and analysis of environmental requirements into the construction design process: a case study

    Directory of Open Access Journals (Sweden)

    Camila Pegoraro

    2010-05-01

    Full Text Available Proposal: As new demands from sustainable development, environmental requirements arise as another challenge to design process management. It is already known that companies which design buildings are usually exposed to many managerial difficulties. Faced to the environmental demands, these companies require new facilities to align environmental requirements to the business goals and to include them properly in design process. This paper is based on a case study in a construction company, which was developed through interviews and document analysis. It is intended to present a procedure for the project environmental requirements elicitation, organization and analysis, which is based on the requirements engineering (ER concepts. As results it was concluded that the ER concepts are useful for the environmental requirements integration into the design process and that strategic planning should give directions for the effective environmental requirements adherence. Moreover, a procedure for environmental requirements modeling is proposed. Key-words: Design process, Requirements management, Environmental requirements, Construction

  8. Design and construction of the defense waste processing facility project at the Savannah River Plant

    International Nuclear Information System (INIS)

    Baxter, R.G.

    1986-01-01

    The Du Pont Company is building for the Department of Energy a facility to vitrify high-level radioactive waste at the Savannah River Plant (SRP) near Aiken, South Carolina. The Defense Waste Processing Facility (DWPF) will solidify existing and future radioactive wastes by immobilizing the waste in Processing Facility (DWPF) will solidify existing and future radioactives wastes by immobilizing the waste in borosilicate glass contained in stainless steel canisters. The canisters will be sealed, decontaminated and stored, prior to emplacement in a federal repository. At the present time, engineering and design is 90% complete, construction is 25% complete, and radioactive processing in the $870 million facility is expected to begin by late 1989. This paper describes the SRP waste characteristics, the DWPF processing, building and equipment features, and construction progress of the facility

  9. Applying the Mixed Methods Instrument Development and Construct Validation Process: the Transformative Experience Questionnaire

    Science.gov (United States)

    Koskey, Kristin L. K.; Sondergeld, Toni A.; Stewart, Victoria C.; Pugh, Kevin J.

    2018-01-01

    Onwuegbuzie and colleagues proposed the Instrument Development and Construct Validation (IDCV) process as a mixed methods framework for creating and validating measures. Examples applying IDCV are lacking. We provide an illustrative case integrating the Rasch model and cognitive interviews applied to the development of the Transformative…

  10. Understanding the innovation adoption process of construction clients, Clients driving Innovation

    NARCIS (Netherlands)

    Hartmann, Andreas; Dewulf, Geert P.M.R.; Reymen, Isabelle; Adams, L.; Guest, K.

    2006-01-01

    Although the role of clients in stimulating construction innovation seems to be controversial, little has been known about their innovation adoption behaviour. This paper presents first results of an ongoing research project the aim of which is to shed more light on the adoption processes of

  11. Construction process and read-out electronics of amorphous silicon position detectors for multipoint alignment monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, C.; Schubert, M.B.; Lutz, B.; Werner, J.H. [Steinbeis-Transferzentrum fuer Angewandte Photovoltaik und Duennschichttechnik, Stuttgart (Germany); Alberdi, J.; Arce, P.; Barcala, J.M.; Calvo, E. [CIEMAT, Madrid (Spain); Ferrando, A. [CIEMAT, Madrid (Spain)], E-mail: antonio.ferrando@ciemat.es; Josa, M.I.; Molinero, A.; Navarrete, J.; Oller, J.C.; Yuste, C. [CIEMAT, Madrid (Spain); Calderon, A.; Fernandez, M.G.; Gomez, G.; Gonzalez-Sanchez, F.J.; Martinez-Rivero, C.; Matorras, F. [Instituto de Fisica de Cantabria IFCA/CSIC-University of Cantabria, Santander (Spain)] (and others)

    2009-09-01

    We describe the construction process of large-area high-performance transparent amorphous silicon position detecting sensors. Details about the characteristics of the associated local electronic board (LEB), specially designed for these sensors, are given. In addition we report on the performance of a multipoint alignment monitoring application of 12 sensors in a 13 m long light path.

  12. Sustainable wall construction and exterior insulation retrofit technology process and structure

    Science.gov (United States)

    Vohra, Arun

    2000-01-01

    A low-cost process for exterior wall insulation retrofit, or new wall construction by stacking layers of fabric tube filled with insulating material against a wall and covering them with mesh and stucco provides a durable structure with good insulating value.

  13. Collaborative Encoding and Memory Accuracy: Examining the Effects of Interactive Components of Co-Construction Processes

    Science.gov (United States)

    Foley, Mary Ann; Fried, Adina Rachel; Cowan, Emily; Bays, Rebecca Brooke

    2014-01-01

    In 2 experiments, the effect of collaborative encoding on memory was examined by testing 2 interactive components of co-construction processes. One component focused on the nature of the interactive exchange between collaborators: As the partners worked together to create descriptions about ways to interact with familiar objects, constraints were…

  14. How Do People Construct Communication about Their Creative Process? Study on Future Creative Professionals

    Science.gov (United States)

    Gliniecka, Martyna

    2016-01-01

    Process of communication can be challenging. At first participants must standardize their concepts of things to hold them close enough to others' concepts, then it's crucial to use appropriate expressions to verbalize those concepts to ensure the mutual understanding. Therefore, it can be problematic when cognitive constructs are hard to…

  15. Management process invaded Ames as the Center shifted from NACA to NASA oversight. Ames constructed

    Science.gov (United States)

    1968-01-01

    Management process invaded Ames as the Center shifted from NACA to NASA oversight. Ames constructed a review room in its headquarters building where, in the graphical style that prevailed in the 1960's, Ames leadership could review progress against schedule, budget and performance measures. Shown, in October 1965 is Merrill Mead chief of Ames' program and resources office. (for H Julian Allen Retirement album)

  16. The Labor Process in Construction: Control without Bureaucratic and Technological Means?

    Science.gov (United States)

    Steiger, Thomas L.; Form, William

    1991-01-01

    Data suggest that it is premature to conclude that management has succeeded in appropriating workers' knowledge, accountability, and responsibility for work. The labor market has become fluid and dynamic and no longer conforms to the traditional construct of an internal labor market. A refinement of labor process theory is in order. (JOW)

  17. A conceptual model for developing KPIs for early phases of the construction process

    NARCIS (Netherlands)

    Haponava, T.; Al-Jibouri, Saad H.S.; Mawdesley, M.; Ahmed, Syed M.; Azhar, Salman; Mohamed, Sherif

    2007-01-01

    The pre-project stage in construction is where most of the decisions about project investment and development are taken. It is therefore very important to be able to control and influence the process at the very beginning of the project. This paper proposes a model for developing a set of KPIs for

  18. Videogame Construction by Engineering Students for Understanding Modelling Processes: The Case of Simulating Water Behaviour

    Science.gov (United States)

    Pretelín-Ricárdez, Angel; Sacristán, Ana Isabel

    2015-01-01

    We present some results of an ongoing research project where university engineering students were asked to construct videogames involving the use of physical systems models. The objective is to help them identify and understand the elements and concepts involved in the modelling process. That is, we use game design as a constructionist approach…

  19. Construct Validity in TOEFL iBT Speaking Tasks: Insights from Natural Language Processing

    Science.gov (United States)

    Kyle, Kristopher; Crossley, Scott A.; McNamara, Danielle S.

    2016-01-01

    This study explores the construct validity of speaking tasks included in the TOEFL iBT (e.g., integrated and independent speaking tasks). Specifically, advanced natural language processing (NLP) tools, MANOVA difference statistics, and discriminant function analyses (DFA) are used to assess the degree to which and in what ways responses to these…

  20. Dynamic Processes of Conceptual Change: Analysis of Constructing Mental Models of Chemical Equilibrium.

    Science.gov (United States)

    Chiu, Mei-Hung; Chou, Chin-Cheng; Liu, Chia-Ju

    2002-01-01

    Investigates students' mental models of chemical equilibrium using dynamic science assessments. Reports that students at various levels have misconceptions about chemical equilibrium. Involves 10th grade students (n=30) in the study doing a series of hands-on chemical experiments. Focuses on the process of constructing mental models, dynamic…

  1. New contexts, new processes, new strategies: the co-construction of meaning in plurilingual interactions

    Directory of Open Access Journals (Sweden)

    Filomena Capucho

    2016-11-01

    In this paper, we will present the analysis of an extract from the Bucharest-Cinco corpus that will allow us to identify the strategies developed in the process of co-construction of meaning in multilingual contexts through a close examination of verbal and non-verbal features.

  2. A critical analysis of the tender points in fibromyalgia.

    Science.gov (United States)

    Harden, R Norman; Revivo, Gadi; Song, Sharon; Nampiaparampil, Devi; Golden, Gary; Kirincic, Marie; Houle, Timothy T

    2007-03-01

    To pilot methodologies designed to critically assess the American College of Rheumatology's (ACR) diagnostic criteria for fibromyalgia. Prospective, psychophysical testing. An urban teaching hospital. Twenty-five patients with fibromyalgia and 31 healthy controls (convenience sample). Pressure pain threshold was determined at the 18 ACR tender points and five sham points using an algometer (dolorimeter). The patients "algometric total scores" (sums of the patients' average pain thresholds at the 18 tender points) were derived, as well as pain thresholds across sham points. The "algometric total score" could differentiate patients with fibromyalgia from normals with an accuracy of 85.7% (P pain across sham points than across ACR tender points, sham points also could be used for diagnosis (85.7%; Ps tested vs other painful conditions. The points specified by the ACR were only modestly superior to sham points in making the diagnosis. Most importantly, this pilot suggests single points, smaller groups of points, or sham points may be as effective in diagnosing fibromyalgia as the use of all 18 points, and suggests methodologies to definitively test that hypothesis.

  3. Systematic construction of qualitative physics-based rules for process diagnostics

    International Nuclear Information System (INIS)

    Reifman, J.; Wei, T.Y.C.

    1995-01-01

    A novel first-principles-based expert system is proposed for on-line detection and identification of faulty component candidates during incipient off-normal process operations. The system performs function-oriented diagnostics and can be reused for diagnosing single-component failures in different processes and different plants through the provision of the appropriate process schematics information. The function-oriented and process-independent diagnostic features of the proposed expert system are achieved by constructing a knowledge base containing three distinct types of information, qualitative balance equation rules, functional classification of process components, and the process piping and instrumentation diagram. The various types of qualitative balance equation rules for processes utilizing single-phase liquids are derived and their usage is illustrated through simulation results of a realistic process in a nuclear power plant

  4. Some present - day considerations about the reading processes, comprehension and text construction

    Directory of Open Access Journals (Sweden)

    Noraima García Valdés

    2013-09-01

    Full Text Available This article is about the way how reading constitute s today a challenge in secondary school, so as to make the reading processes more efficient and how the processes of text comprehension and text construction are essential to develop reading skills. The better this component is developed in the lesson, the greater the su ccess of speaking and writing; this way the educator will contribute to develop the communicative competence in the oral and written forms of the language.

  5. Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects.

    Science.gov (United States)

    Aminbakhsh, Saman; Gunduz, Murat; Sonmez, Rifat

    2013-09-01

    The inherent and unique risks on construction projects quite often present key challenges to contractors. Health and safety risks are among the most significant risks in construction projects since the construction industry is characterized by a relatively high injury and death rate compared to other industries. In construction project management, safety risk assessment is an important step toward identifying potential hazards and evaluating the risks associated with the hazards. Adequate prioritization of safety risks during risk assessment is crucial for planning, budgeting, and management of safety related risks. In this paper, a safety risk assessment framework is presented based on the theory of cost of safety (COS) model and the analytic hierarchy process (AHP). The main contribution of the proposed framework is that it presents a robust method for prioritization of safety risks in construction projects to create a rational budget and to set realistic goals without compromising safety. The framework provides a decision tool for the decision makers to determine the adequate accident/injury prevention investments while considering the funding limits. The proposed safety risk framework is illustrated using a real-life construction project and the advantages and limitations of the framework are discussed. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

  6. An Integrated Framework for Process-Driven Model Construction in Disease Ecology and Animal Health.

    Science.gov (United States)

    Mancy, Rebecca; Brock, Patrick M; Kao, Rowland R

    2017-01-01

    Process models that focus on explicitly representing biological mechanisms are increasingly important in disease ecology and animal health research. However, the large number of process modelling approaches makes it difficult to decide which is most appropriate for a given disease system and research question. Here, we discuss different motivations for using process models and present an integrated conceptual analysis that can be used to guide the construction of infectious disease process models and comparisons between them. Our presentation complements existing work by clarifying the major differences between modelling approaches and their relationship with the biological characteristics of the epidemiological system. We first discuss distinct motivations for using process models in epidemiological research, identifying the key steps in model design and use associated with each. We then present a conceptual framework for guiding model construction and comparison, organised according to key aspects of epidemiological systems. Specifically, we discuss the number and type of disease states, whether to focus on individual hosts (e.g., cows) or groups of hosts (e.g., herds or farms), how space or host connectivity affect disease transmission, whether demographic and epidemiological processes are periodic or can occur at any time, and the extent to which stochasticity is important. We use foot-and-mouth disease and bovine tuberculosis in cattle to illustrate our discussion and support explanations of cases in which different models are used to address similar problems. The framework should help those constructing models to structure their approach to modelling decisions and facilitate comparisons between models in the literature.

  7. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Pechmann, J.H.K.; Scott, D.E.; McGregor, J.H.; Estes, R.A.; Chazal, A.C.

    1993-02-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980's. The Savannah River Ecology Laboratory (SREL) has completed 12 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of refuge ponds'' as alternative breeding sites for amphibians that formerly bred at Sun Bay Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10CFR1022).

  8. Business data processing in the service of quality and safety in nuclear power plant construction

    International Nuclear Information System (INIS)

    Chassignet, C.

    1980-01-01

    Construction of a nuclear power plant implies collection and correlation of several thousand items of information which must be identified and which must remain retrievable throughout the service life of the plant. The Framatome Corporation, which has one of the largest nuclear power plant construction programs in the world, therefore set up a processing and checking system for the documents containing this information. The author describes the functions and principles of this system (known as SHARAD), together with its technical data and its operation [fr

  9. An Algorithm for Modelling the Impact of the Judicial Conflict-Resolution Process on Construction Investment

    Directory of Open Access Journals (Sweden)

    Andrej Bugajev

    2018-01-01

    Full Text Available In this article, the modelling of the judicial conflict-resolution process is considered from a construction investor’s point of view. Such modelling is important for improving the risk management for construction investors and supporting sustainable city development by supporting the development of rules regulating the construction process. Thus, this raises the problem of evaluation of different decisions and selection of the optimal one followed by distribution extraction. First, the example of such a process is analysed and schematically represented. Then, it is formalised as a graph, which is described in the form of a decision graph with cycles. We use some natural problem properties and provide the algorithm to convert this graph into a tree. Then, we propose the algorithm to evaluate profits for different scenarios with estimation of time, which is done by integration of an average daily costs function. Afterwards, the optimisation problem is solved and the optimal investor strategy is obtained—this allows one to extract the construction project profit distribution, which can be used for further analysis by standard risk (and other important information-evaluation techniques. The overall algorithm complexity is analysed, the computational experiment is performed and conclusions are formulated.

  10. Injection of marinade with actinidin increases tenderness of porcine M. biceps femoris and affects myofibrils and connective tissue

    DEFF Research Database (Denmark)

    Christensen, M.; Torngren, M. A.; Gunvig, A.

    2009-01-01

    BACKGROUND: Marination of beef muscles with brine solutions containing proteolytic enzymes from fruit extracts has been shown to tenderize meat. However, the effect of marination with actinidin on tenderness of pork muscles has not been investigated. Tenderness and eating quality of porcine M. bi...... indicate that actinidin tenderizes pork M. biceps femoris by affecting both the myofibrils and connective tissue....

  11. 41 CFR 102-117.55 - What are the advantages and disadvantages of using a rate tender?

    Science.gov (United States)

    2010-07-01

    ... and disadvantages of using a rate tender? 102-117.55 Section 102-117.55 Public Contracts and Property... the advantages and disadvantages of using a rate tender? (a) Using a rate tender is an advantage when... volume to obtain favorable rates. (b) Using a rate tender may be a disadvantage when: (1) You have...

  12. A Psychometric Study of Reading Processes in L2 Acquisition: Deploying Deep Processing to Push Learners' Discourse Towards Syntactic Processing-Based Constructions

    Science.gov (United States)

    Manuel, Carlos J.

    2009-01-01

    This study assesses reading processes and/or strategies needed to deploy deep processing that could push learners towards syntactic-based constructions in L2 classrooms. Research has found L2 acquisition to present varying degrees of success and/or fossilization (Bley-Vroman 1989, Birdsong 1992 and Sharwood Smith 1994). For example, learners have…

  13. Lévy matters VI Lévy-type processes moments, construction and heat kernel estimates

    CERN Document Server

    Kühn, Franziska

    2017-01-01

    Presenting some recent results on the construction and the moments of Lévy-type processes, the focus of this volume is on a new existence theorem, which is proved using a parametrix construction. Applications range from heat kernel estimates for a class of Lévy-type processes to existence and uniqueness theorems for Lévy-driven stochastic differential equations with Hölder continuous coefficients. Moreover, necessary and sufficient conditions for the existence of moments of Lévy-type processes are studied and some estimates on moments are derived. Lévy-type processes behave locally like Lévy processes but, in contrast to Lévy processes, they are not homogeneous in space. Typical examples are processes with varying index of stability and solutions of Lévy-driven stochastic differential equations. This is the sixth volume in a subseries of the Lecture Notes in Mathematics called Lévy Matters. Each volume describes a number of important topics in the theory or applicati ons of Lévy processes and pays ...

  14. Reindeer meat – is it always tender, tasty and healthy?

    Directory of Open Access Journals (Sweden)

    Eva Wiklund

    2007-04-01

    Full Text Available Meat with high pH values, so called DFD (Dark, Firm, Dry meat, is a persistent quality defect foundmin all meat species. DFD shortens shelf life, especially for vacuum-packed meat and affects meat colour, tenderness and water-holding properties. High pH values in reindeer meat have been related to pre-slaughter handling stress and poor nutritional status of the animals. There are numerous reports that variation in muscle pH and glycogen content give rise to considerable variations in meat tenderness in species such as beef and lamb. In contrast, reindeer meat has been found to be extremely tender regardless of ultimate pH. This phenomenon has been related to the speed of post mortem protein degradation and the small muscle fibre size in reindeer. Previous research has demonstrated that the fatty acid composition of meat changes in response to diets. Generally, a higher proportion of long, unsaturated fatty acids were found in meat from grazing animals compared with animals fed a grain-based diet. Reindeer meat has been found to contain moderate amounts of polyunsaturated fatty acids (PUFA, especially so-called n-3 (or omega-3 PUFAs. The PUFAs are known to be susceptible to oxidation and may therefore be easily oxidized during processing by techniques like smoking and drying. A trained sensory panel concluded that meat from reindeer fed commercial feed scored higher for liverish and sweet flavours and lower for off-flavou (i.e. ‘grass’, ‘wild’ and ‘game’ compared with meat from grazing animals. Consumer preference tests on reindeer meat showed that 50 per cent of the consumers preferred meat from grazing reindeer and 50 per cent meat from pellet-fed animals. Recent reindeer meat research has included new feed mixtures using ingredients like linseed and fishmeal. Crushed linseed in the feed gave meat with a fat composition similar to that of natural pasture, which meant more PUFA than in meat from reindeer fed the normal grain

  15. Pain sensitivity and pericranial tenderness in children with tension-type headache: a controlled study

    Directory of Open Access Journals (Sweden)

    Soee ABL

    2013-06-01

    central pain-processing levels. Keywords: sensitization, pain measurement, total tenderness score, pressure pain threshold, pathophysiological mechanisms, suprathreshold stimulation

  16. Concept and construction process of the ceramic curtain of Vila-real Library

    Directory of Open Access Journals (Sweden)

    A. Peñín Llobell

    2016-12-01

    Full Text Available The construction of the Library of Vila-real, selected in 2012 in the VIII Latin American Biennial of Architecture and Urbanism, highlights the importance of collaboration with industry for the development and application of its outer membrane. The analysis of the construction process of the ceramic cylindrical curtain that defines it, performed by white glazed ceramic, 5 cm diameter and 7.5 m height, reveals this fact. The system builds an interstitial space, essential for its use and environmental integration. At the same time it links the building to both local industrial fabric, which aims to establish itself as one of its exponents, and to the Mediterranean culture of filters. The procedure followed is ascribed to the postartesanal and pragmatic perspective that beyond the modern heroes, introduced characters like Jean Prouvé and that today, we state, should find natural and legal channels for its development, on behalf of the progress of the construction sector.

  17. The research on construction and application of machining process knowledge base

    Science.gov (United States)

    Zhao, Tan; Qiao, Lihong; Qie, Yifan; Guo, Kai

    2018-03-01

    In order to realize the application of knowledge in machining process design, from the perspective of knowledge in the application of computer aided process planning(CAPP), a hierarchical structure of knowledge classification is established according to the characteristics of mechanical engineering field. The expression of machining process knowledge is structured by means of production rules and the object-oriented methods. Three kinds of knowledge base models are constructed according to the representation of machining process knowledge. In this paper, the definition and classification of machining process knowledge, knowledge model, and the application flow of the process design based on the knowledge base are given, and the main steps of the design decision of the machine tool are carried out as an application by using the knowledge base.

  18. Closed cycle construction: an integrated process for the separation and reuse of C&D waste.

    Science.gov (United States)

    Mulder, Evert; de Jong, Tako P R; Feenstra, Lourens

    2007-01-01

    In The Netherlands, construction and demolition (C&D) waste is already to a large extent being reused, especially the stony fraction, which is crushed and reused as a road base material. In order to increase the percentage of reuse of the total C&D waste flow to even higher levels, a new concept has been developed. In this concept, called 'Closed Cycle Construction', the processed materials are being reused at a higher quality level and the quantity of waste that has to be disposed of is minimised. For concrete and masonry, the new concept implies that the material cycle will be completely closed, and the original constituents (clay bricks, gravel, sand, cement stone) are recovered in thermal processes. The mixed C&D waste streams are separated and decontaminated. For this purpose several dry separation techniques are being developed. The quality of the stony fraction is improved so much, that this fraction can be reused as an aggregate in concrete. The new concept has several benefits from a sustainability point of view, namely less energy consumption, less carbon dioxide emission, less waste production and less land use (for excavation and disposal sites). One of the most remarkable benefits of the new concept is that the thermal process steps are fuelled with the combustible fraction of the C&D waste itself. Economically the new process is more or less comparable with the current way of processing C&D waste. On the basis of the positive results of a feasibility study, currently a pilot and demonstration project is being carried out. The aim is to optimise the different process steps of the Closed Cycle Construction process on a laboratory scale, and then to verify them on a large scale. The results of the project are promising, so far.

  19. Utilization of Integrated Process Control, Data Capture, and Data Analysis in Construction of Accelerator Systems

    International Nuclear Information System (INIS)

    Bonnie Madre; Charles Reece; Joseph Ozelis; Valerie Bookwalter

    2003-01-01

    Jefferson Lab has developed a web-based system that integrates commercial database, data analysis, document archiving and retrieval, and user interface software, into a coherent knowledge management product (Pansophy). This product provides important tools for the successful pursuit of major projects such as accelerator system development and construction, by offering elements of process and procedure control, data capture and review, and data mining and analysis. After a period of initial development, Pansophy is now being used in Jefferson Lab's SNS superconducting linac construction effort, as a means for structuring and implementing the QA program, for process control and tracking, and for cryomodule test data capture and presentation/analysis. Development of Pansophy is continuing, in particular data queries and analysis functions that are the cornerstone of its utility

  20. Learning and Collective Knowledge Construction With Social Media: A Process-Oriented Perspective

    Science.gov (United States)

    Kimmerle, Joachim; Moskaliuk, Johannes; Oeberst, Aileen; Cress, Ulrike

    2015-01-01

    Social media are increasingly being used for educational purposes. The first part of this article briefly reviews literature that reports on educational applications of social media tools. The second part discusses theories that may provide a basis for analyzing the processes that are relevant for individual learning and collective knowledge construction. We argue that a systems-theoretical constructivist approach is appropriate to examine the processes of educational social media use, namely, self-organization, the internalization of information, the externalization of knowledge, and the interplay of externalization and internalization providing the basis of a co-evolution of cognitive and social systems. In the third part we present research findings that illustrate and support this systems-theoretical framework. Concluding, we discuss the implications for educational design and for future research on learning and collective knowledge construction with social media. PMID:26246643

  1. [The construction process of managerial profile competencies for nurse coordinators in the hospital field].

    Science.gov (United States)

    Manenti, Simone Alexandra; Ciampone, Maria Helena Trench; Mira, Vera Lucia; Minami, Lígia Fumiko; Soares, Jaqueline Maria Sousa

    2012-06-01

    The objective of this study was to construct a profile of managerial competencies, based on the consensus of nurse coordinators in the field. This study was developed in a philanthropic hospital in São Paulo, following the research-action model, and included 13 nurse coordinators as participants. The data collection was performed using the focal group technique. Data analysis was performed using the theoretical frameworks related to the working process and managerial competencies. The results identified the greater emphasis assigned to the competencies related to the mentor, coordinator and director roles. It was, therefore, possible to construct a professional development plan that is based on competencies in the technical, ethical-political, and communicative domains, as well as the development of citizenship. The analysis of the managerial working process and the study of the competencies within the managerial environment were shown to be important, because they highlighted the professionals' need to improve, thus fulfilling personal, professional, and organizational demands.

  2. Constructing large scale SCI-based processing systems by switch elements

    International Nuclear Information System (INIS)

    Wu, B.; Kristiansen, E.; Skaali, B.; Bogaerts, A.; Divia, R.; Mueller, H.

    1993-05-01

    The goal of this paper is to study some of the design criteria for the switch elements to form the interconnection of large scale SCI-based processing systems. The approved IEEE standard 1596 makes it possible to couple up to 64K nodes together. In order to connect thousands of nodes to construct large scale SCI-based processing systems, one has to interconnect these nodes by switch elements to form different topologies. A summary of the requirements and key points of interconnection networks and switches is presented. Two models of the SCI switch elements are proposed. The authors investigate several examples of systems constructed for 4-switches with simulations and the results are analyzed. Some issues and enhancements are discussed to provide the ideas behind the switch design that can improve performance and reduce latency. 29 refs., 11 figs., 3 tabs

  3. Customer complaints as a source of customer-focused process improvement: A constructive case study

    Directory of Open Access Journals (Sweden)

    Uusitalo, K.,

    2008-01-01

    Full Text Available Process-based thinking commonly focuses on enhancing the efficiency of processes, while it is often criticized for not paying enough attention to the customer. This paper argues that customer complaint information can be used as a basis for customer-focused process improvement. Thus, it is not enough to make the complaining customer satisfied, but the complaint information should also feed back to the actual processes where the fault causing the complaint arose and where it can be removed. The empirical component of the study includes the development of a novel construction to utilize customer complaints for process improvements, which was implemented in a large Finnish enterprise operating in the wholesale logistics environment. The results show benefits at both operational and strategic levels.

  4. The Evaluation Process in Non-Formal Education: A Path for Its Construction

    Directory of Open Access Journals (Sweden)

    Manuel Chacón-Ortiz

    2015-05-01

    Full Text Available This paper analyzes the construction and conceptualization of evaluation processes in non- formal education. The purpose of this essay is to discuss about the need to evaluate educational processes and to propose a scheme with the basic elements for evaluation. The current discussions in the field are the starting point, in order to raise the need for institutions, individuals, and organizations to get involved in developing educational processes alternative to those conducted in formal and informal settings. In addition, current theoretical debates in the field are explored. An overview of the subject is provided to point out steps and key processes, as well as evaluation tools in education. In conclusion, there is a growing importance of evaluating and reporting on the results of non-formal learning processes.

  5. [On-line processing mechanisms in text comprehension: a theoretical review on constructing situation models].

    Science.gov (United States)

    Iseki, Ryuta

    2004-12-01

    This article reviewed research on construction of situation models during reading. To position variety of research in overall process appropriately, an unitary framework was devised in terms of three theories for on-line processing: resonance process, event-indexing model, and constructionist theory. Resonance process was treated as a basic activation mechanism in the framework. Event-indexing model was regarded as a screening system which selected and encoded activated information in situation models along with situational dimensions. Constructionist theory was considered to have a supervisory role based on coherence and explanation. From a view of the unitary framework, some problems concerning each theory were examined and possible interpretations were given. Finally, it was pointed out that there were little theoretical arguments on associative processing at global level and encoding text- and inference-information into long-term memory.

  6. Influence of different processing techniques on the mechanical properties of used tires in embankment construction

    International Nuclear Information System (INIS)

    Edincliler, Ayse; Baykal, Goekhan; Saygili, Altug

    2010-01-01

    Use of the processed used tires in embankment construction is becoming an accepted way of beneficially recycling scrap tires due to shortages of natural mineral resources and increasing waste disposal costs. Using these used tires in construction requires an awareness of the properties and the limitations associated with their use. The main objective of this paper is to assess the different processing techniques on the mechanical properties of used tires-sand mixtures to improve the engineering properties of the available soil. In the first part, a literature study on the mechanical properties of the processed used tires such as tire shreds, tire chips, tire buffings and their mixtures with sand are summarized. In the second part, large-scale direct shear tests are performed to evaluate shear strength of tire crumb-sand mixtures where information is not readily available in the literature. The test results with tire crumb were compared with the other processed used tire-sand mixtures. Sand-used tire mixtures have higher shear strength than that of the sand alone and the shear strength parameters depend on the processing conditions of used tires. Three factors are found to significantly affect the mechanical properties: normal stress, processing techniques, and the used tire content.

  7. Influence of different processing techniques on the mechanical properties of used tires in embankment construction.

    Science.gov (United States)

    Edinçliler, Ayşe; Baykal, Gökhan; Saygili, Altug

    2010-06-01

    Use of the processed used tires in embankment construction is becoming an accepted way of beneficially recycling scrap tires due to shortages of natural mineral resources and increasing waste disposal costs. Using these used tires in construction requires an awareness of the properties and the limitations associated with their use. The main objective of this paper is to assess the different processing techniques on the mechanical properties of used tires-sand mixtures to improve the engineering properties of the available soil. In the first part, a literature study on the mechanical properties of the processed used tires such as tire shreds, tire chips, tire buffings and their mixtures with sand are summarized. In the second part, large-scale direct shear tests are performed to evaluate shear strength of tire crumb-sand mixtures where information is not readily available in the literature. The test results with tire crumb were compared with the other processed used tire-sand mixtures. Sand-used tire mixtures have higher shear strength than that of the sand alone and the shear strength parameters depend on the processing conditions of used tires. Three factors are found to significantly affect the mechanical properties: normal stress, processing techniques, and the used tire content. Copyright 2009. Published by Elsevier Ltd.

  8. Editorial Management serials online: construction process, publication and administration with free software solutions

    OpenAIRE

    Andrés Vuotto; María Carolina Rojas; Gladys Vanesa Fernández

    2013-01-01

    Initially raised the main points to consider and develop the planning and construction of an online publication of a scientific nature, emphasizing the process and editorial functions, document preservation, access management, indexing and visibility. In the second part of the paper presents a proposed solution to every aspect previously described, highlighting the work of the information professional and optimizing time, cost and results offered free software, from a concrete experience with...

  9. Usefulness of tenderness to characterise fibromyalgia severity in women.

    Science.gov (United States)

    Aparicio, V A; Carbonell-Baeza, A; Ortega, F B; Estevez, F; Ruiz, J R; Delgado-Fernández, M

    2011-01-01

    To investigate the usefulness of tenderness (tender points count (TPC) and algometer score) to characterise fibromyalgia (FM) severity and symptomatology in women. The study sample comprised 174 women aged 51±7 years. We ossesse tenderness using pressure algometry; quality of life by means of the Short-Form 36 Health Survey (SF-36) and the Hospital Anxiety and Depression Scale (HADS). We used the FM impact questionnaire (FIQ) to assess FM severity and symptomatology. Patients were categorised according to three FIQ-derived categories: FIQFIQFIQ≥59 (16.9±2 vs. 15.6±4, p=0.02), whereas no differences between groups were observed according to FIQ≥70 (17.0±2 vs. 16.2±3, p=0.12) or FM type (16.8±3 for type II vs. 15.9±4 for type I, p=0.13). We observed a significant association between TPC and FIQ-job difficulty, pain, morning tiredness and stiffness dimensions (all pFIQ, FIQ-anxiety, fatigue and depression dimensions (all p>0.05). Algometer score was lower in the FIQ≥70 (45.7±12 vs. 51.1±14, p=0.05) and FIQ≥59 (46.7±13 vs. 52.7±14, p=0.05) groups, and there were no difference between FM types (48.7±13 vs. 49.5±14 for type II and I respectively, p=0.81). Algometer score was not associated with total score of FIQ or FIQ dimensions (all p≥0.1). Widespread pain and pain hypersensitivity, as measured by TPC and algometer score, do not seem to be useful to characterise FM severity and symptomatology (measured by FIQ) in women.

  10. An Integrated Framework for Process-Driven Model Construction in Disease Ecology and Animal Health

    Directory of Open Access Journals (Sweden)

    Rebecca Mancy

    2017-09-01

    Full Text Available Process models that focus on explicitly representing biological mechanisms are increasingly important in disease ecology and animal health research. However, the large number of process modelling approaches makes it difficult to decide which is most appropriate for a given disease system and research question. Here, we discuss different motivations for using process models and present an integrated conceptual analysis that can be used to guide the construction of infectious disease process models and comparisons between them. Our presentation complements existing work by clarifying the major differences between modelling approaches and their relationship with the biological characteristics of the epidemiological system. We first discuss distinct motivations for using process models in epidemiological research, identifying the key steps in model design and use associated with each. We then present a conceptual framework for guiding model construction and comparison, organised according to key aspects of epidemiological systems. Specifically, we discuss the number and type of disease states, whether to focus on individual hosts (e.g., cows or groups of hosts (e.g., herds or farms, how space or host connectivity affect disease transmission, whether demographic and epidemiological processes are periodic or can occur at any time, and the extent to which stochasticity is important. We use foot-and-mouth disease and bovine tuberculosis in cattle to illustrate our discussion and support explanations of cases in which different models are used to address similar problems. The framework should help those constructing models to structure their approach to modelling decisions and facilitate comparisons between models in the literature.

  11. Constructing squares as a mathematical problem solving process in pre-school

    Directory of Open Access Journals (Sweden)

    MARIA ANGELA SHIAKALLI

    2014-06-01

    Full Text Available Could problem solving be the object of teaching in early education? Could children’s engagement in problem solving processes lead to skills and conceptual understanding development? Could appropriate teaching interventions scaffold children’s efforts? The sample consisted of 25 children attending public pre-school in Cyprus. The children were asked to construct different sized squares. Findings show that children responded positively to the problem and were successful in solving it. During the problem solving process children demonstrated development of skills and conceptual understanding. Teacher-children and children-children interactions played an important role in the positive outcome of the activity.

  12. Application of coupled symbolic and numeric processing to an advanced scheduling system for plant construction

    International Nuclear Information System (INIS)

    Kobayashi, Yasuhiro; Takamoto, Masanori; Nonaka, Hisanori; Yamada, Naoyuki

    1994-01-01

    A scheduling system has been developed by integrating symbolic processing functions for constraint handling and modification guidance, with numeric processing functions for schedule optimization and evaluation. The system is composed of an automatic schedule generation module, interactive schedule revision module and schedule evaluation module. The goal of the problem solving is the flattening of the daily resources requirement throughout the scheduling period. The automatic schedule generation module optimizes the initial schedule according to the formulatable portion of requirement description specified in a predicate-like language. A planning engineer refines the near-goal schedule through a knowledge-based interactive optimization process to obtain the goal schedule which fully covers the requirement description, with the interactive schedule revision module and schedule evaluation module. A scheduling system has been implemented on the basis of the proposed problem solving framework and experimentally applied to real-world sized scheduling problems for plant construction. With a result of the overall plant construction scheduling, a section schedule optimization process is described with the emphasis on the symbolic processing functions. (author)

  13. GHG emission quantification for pavement construction projects using a process-based approach

    Directory of Open Access Journals (Sweden)

    Charinee Limsawasd

    2017-03-01

    Full Text Available Climate change and greenhouse gas (GHG emissions have attracted much attention for their impacts upon the global environment. Initiating of new legislation and regulations for control of GHG emissions from the industrial sectors has been applied to address this problem. The transportation industries, which include operation of road pavement and pavement construction equipment, are the highest GHG-emitting sectors. This study presents a novel quantification model of GHG emissions of pavement construction using process-based analysis. The model is composed of five modules that evaluate GHG emissions. These are: material production and acquisition, (2 material transport to a project site, (3 heavy equipment use, (4 on-site machinery use, and, (5 on-site electricity use. The model was applied to a hypothetical pavement project to compare the environmental impacts of flexible and rigid pavement types during construction. The resulting model can be used for evaluation of environmental impacts, as well as for designing and planning highway pavement construction.

  14. Construction Process Simulation and Safety Analysis Based on Building Information Model and 4D Technology

    Institute of Scientific and Technical Information of China (English)

    HU Zhenzhong; ZHANG Jianping; DENG Ziyin

    2008-01-01

    Time-dependent structure analysis theory has been proved to be more accurate and reliable com-pared to commonly used methods during construction. However, so far applications are limited to partial pe-riod and part of the structure because of immeasurable artificial intervention. Based on the building informa-tion model (BIM) and four-dimensional (4D) technology, this paper proposes an improves structure analysis method, which can generate structural geometry, resistance model, and loading conditions automatically by a close interlink of the schedule information, architectural model, and material properties. The method was applied to a safety analysis during a continuous and dynamic simulation of the entire construction process.The results show that the organic combination of the BIM, 4D technology, construction simulation, and safety analysis of time-dependent structures is feasible and practical. This research also lays a foundation for further researches on building lifecycle management by combining architectural design, structure analy-sis, and construction management.

  15. IMPLEMENTATION OF THE CONCEPT OF AUTOMATION AND INTELLECTUALIZATION OF MANAGEMENT OF ROAD CONSTRUCTION PROCESSES

    Directory of Open Access Journals (Sweden)

    Ivanchura Vladimir Ivanovich

    2018-02-01

    Full Text Available Subject: management of operating modes of road-building machines, taking into account the implementation of the concept of information modeling of the road. We have reviewed the status and the development problems for directions of improving the control systems of road-construction machine processes. In this work we focus on the road construction stage “laying asphalt-concrete - compaction”, the effective control of which can lead to significant improvement in the quality of road surfaces, increase of durability and reduction of defects in pavements. Research objectives: rationale and directions of realization of the concept of intellectualization of the road construction management. Materials and methods: analysis of the shortcomings of construction of asphalt-concrete pavements, analysis of the methods of workflow management of road-building machines. Results: we have substantiated the methodological background for the development of intellectual control systems of road-building machines. Conclusions: we considered possible ways of introducing the concept of intellectualization of management systems for road-building machines.

  16. The relationship marketing in the process of customer loyalty. Case large construction of Manizales

    Directory of Open Access Journals (Sweden)

    María Cristina Torres Camacho

    2015-06-01

    Full Text Available This paper is based on the model Lindgreen (2001, upholding the relationship marketing should be approached in three dimensions: objectives, definition of constructs and tools, which enable better customer management within organizations. The objective was to determine the characteristics of relationship marketing as a key factor in the process of Customer Loyalty in the big construction of Manizales Colombia. From a joint perspective, methodology relies on instruments and qualitative and quantitative analysis of court. The results tend to confirm that developers recognize the importance of Relational Marketing but not raised as a policy or have not defined in its strategic plan; additionally, expressed lack of strategies for customer retention, however, these remain loyal because the construction work on meeting your needs, based on trust, commitment and communication. To conclude, the faithful customers perceive that construction does not periodically evaluate their satisfaction with the purchased product, also claim that they show little interest in understanding the perception, make personal meetings, making constant communication through phone calls and meet their tastes and preferences.

  17. Constructing wetlands: measuring and modeling feedbacks of oxidation processes between plants and clay-rich material

    Science.gov (United States)

    Saaltink, Rémon; Dekker, Stefan C.; Griffioen, Jasper; Wassen, Martin J.

    2016-04-01

    Interest is growing in using soft sediment as a building material in eco-engineering projects. Wetland construction in the Dutch lake Markermeer is an example: here the option of dredging some of the clay-rich lake-bed sediment and using it to construct 10.000 ha of wetland will soon go under construction. Natural processes will be utilized during and after construction to accelerate ecosystem development. Knowing that plants can eco-engineer their environment via positive or negative biogeochemical plant-soil feedbacks, we conducted a six-month greenhouse experiment to identify the key biogeochemical processes in the mud when Phragmites australis is used as an eco-engineering species. We applied inverse biogeochemical modeling to link observed changes in pore water composition to biogeochemical processes. Two months after transplantation we observed reduced plant growth and shriveling as well as yellowing of foliage. The N:P ratios of plant tissue were low and were affected not by hampered uptake of N but by enhanced uptake of P. Plant analyses revealed high Fe concentrations in the leaves and roots. Sulfate concentrations rose drastically in our experiment due to pyrite oxidation; as reduction of sulfate will decouple Fe-P in reducing conditions, we argue that plant-induced iron toxicity hampered plant growth, forming a negative feedback loop, while simultaneously there was a positive feedback loop, as iron toxicity promotes P mobilization as a result of reduced conditions through root death, thereby stimulating plant growth and regeneration. Given these two feedback mechanisms, we propose that when building wetlands from these mud deposits Fe-tolerant species are used rather than species that thrive in N-limited conditions. The results presented in this study demonstrate the importance of studying the biogeochemical properties of the building material and the feedback mechanisms between plant and soil prior to finalizing the design of the eco-engineering project.

  18. The construction of mind, self, and society: the social process behind G. H. Mead'S social psychology.

    Science.gov (United States)

    Huebner, Daniel R

    2012-01-01

    Mind, Self, and Society, the posthumously published volume by which George Herbert Mead is primarily known, poses acute problems of interpretation so long as scholarship does not consider the actual process of its construction. This paper utilizes extensive archival correspondence and notes in order to analyze this process in depth. The analysis demonstrates that the published form of the book is the result of a consequential interpretive process in which social actors manipulated textual documents within given practical constraints over a course of time. The paper contributes to scholarship on Mead by indicating how this process made possible certain understandings of his social psychology and by relocating the materials that make up the single published text within the disparate contexts from which they were originally drawn. © 2012 Wiley Periodicals, Inc.

  19. Fuzzy sets on step of planning of experiment for organization and management of construction processes

    Directory of Open Access Journals (Sweden)

    Lapidus Azariy

    2016-01-01

    Full Text Available In this article, problems of mathematical modeling and experiment planning of the organization and management of construction. The authors designated the basic restrictions and the difficulties in this field. Concluded that the planning of research experiment is possible in the information sphere with using of heuristic, graphical, mathematical models, as well as neural networks and genetic algorithms. The authors note the need for use of expert information in the case of the formalization of quality parameters. The article presented an overview of the translation methods of qualitative information into mathematical language. Comparison of methods the qualimetry of USSR scientists, the analytic hierarchy process and fuzzy set theory were performed. The benefits of the latter for interpretation of qualitative parameters were identified. The authors have given many examples of application fuzzy sets for formalization of organizational factors of construction processes. Finally, there conclusion was made about progressiveness and effectiveness of fuzzy set theory to describe the qualitative parameters of organization and management of construction.

  20. Green Roofs: Standardization and Quality Control of Processes in Green Construction

    Directory of Open Access Journals (Sweden)

    Korol Elena

    2017-01-01

    Full Text Available The article considers the problems of standardization and quality control of processes in the construction, improvement of integrated safety of buildings and the implementation of innovative green building technologies, the use of national standards as well as international rating systems for green buildings evaluation. This is one of the priority directions in development of the modern construction. The aim of this study is the analysis of the green roof systems and international standards, which were carried out in the green building industry. The authors have studied traditional and innovative solutions of rational using natural resources and energy, the green roof system with integration of supported solar and wind energy collecting and converting devices and of irrigation system. Some studies provide evidence for the benefits of the modular green roof system in urban green space with microclimate differences. This article presents a new research which advances our knowledge of the economic and environmental services provided by the green roof system. Research reported here also considers the analysis of the Russian and international legislation of the quality control of processes in green construction.

  1. Tenderization effect of soy sauce on beef M. biceps femoris.

    Science.gov (United States)

    Kim, Hyun-Wook; Choi, Yun-Sang; Choi, Ji-Hun; Kim, Hack-Youn; Lee, Mi-Ai; Hwang, Ko-Eun; Song, Dong-Heon; Lim, Yun-Bin; Kim, Cheon-Jei

    2013-08-15

    This study was conducted to evaluate the tenderization effect of soy sauce on beef M. biceps femoris (BF). Five marinades were prepared with 4% (w/v) sodium chloride and 25% (w/v) soy sauce solutions (4% salt concentration) and mixed with the ratios of 100:0 (S0, pH 6.52), 75:25 (S25, 5.40) 50:50 (S50, 5.24), 25:75 (S75, 5.05), and 0:100 (S100, 4.85), respectively. The BF samples which were obtained from Hanwoo cows at 48 h postmortem (n=24) were marinated with five marinades for 72 h at 4°C (1:4 w/w), and the effects of soy sauce on tenderness were evaluated. Soy sauce marination resulted in a decrease in the pH value of the BF sample. However, there were no significant differences in the water holding capacity (Psauce may attribute various mechanisms such as increased collagen solubility or proteolysis which depend on soy sauce level in marinade. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Supply Chain Planning for a Timber Harvesting Plus Sale Tender

    Directory of Open Access Journals (Sweden)

    Josef Holoubek

    2015-01-01

    Full Text Available Since 2010, the Czech State Forest Enterprise has been inviting timber-harvesting tenders while insisting on the forestry company purchasing the timber from the felled trees as well. To win, a tender must offer the greatest difference between the price of the timber purchased and the cost of the operations. Thus, the forest companies are now facing new problem: apart from minimizing the logging costs they are searching for a cross-cutting and mill-distribution strategy that maximizes the selling price of the harvested timber. The optimization model devised by the present paper provides support for finding an optimal timber selling strategy and, as an important contribution, include a detailed plan for cross-cutting the logs and assign them to the particular customers. We keep the support accessible via common office software and the cross-cutting and customer-assigning problem is formulated as a linear programming model for EXCEL, a particular real-world problem is solved and, using expert comparison, the model appears to provide very good results.

  3. Didactical Reconstruction of Processes in Knowledge Construction: Pre-Service Physics Teachers Learning the Law of Electromagnetic Induction

    Science.gov (United States)

    Mantyla, Terhi

    2012-01-01

    In physics teacher education, two central goals are first to learn the structures of physics knowledge, and second the processes of its construction. To know the structure is to know the framework of concepts and laws; to know the processes is to know where the knowledge comes from, how the framework is constructed, and how it can be justified.…

  4. 25 CFR 900.133 - Does the declination process or the Contract Dispute Act apply to construction contract...

    Science.gov (United States)

    2010-04-01

    ...-DETERMINATION AND EDUCATION ASSISTANCE ACT Construction § 900.133 Does the declination process or the Contract... 25 Indians 2 2010-04-01 2010-04-01 false Does the declination process or the Contract Dispute Act apply to construction contract amendments proposed either by an Indian tribe or tribal organization or...

  5. Relationships between widespread pain and thresholds pain tolerance on tender points in Portuguese women with fibromyalgia: impact on daily life.

    Directory of Open Access Journals (Sweden)

    Pablo Tomas-Carus

    2015-07-01

    Full Text Available Objectives: to establish a relationship between widespread pain subjectively perceived and threshold pain tolerance on tender points, and to determine whether there are differences in threshold pain tolerance on tender points between the upper and lower body, as well as between the dominant and non-dominant side, and whether these differences have an impact on the daily life of Portuguese women with fibromyalgia (FM. Material e Methods: thirty-one women with FM aged between 34 and 67 years volunteered for the study. Threshold pain tolerance was assessed at critical points using a digital algometer pressure; the widespread pain index (WPI was constructed by the addition of 19 painful body regions; and the impact on the daily life assessed by the Portuguese version of the Fibromyalgia Impact Questionnaire (FIQ, with individual interviews. Results: significant differences between the percentage of threshold pain tolerance of the whole body and the scales of widespread pain subjectively perceived were observed, showing that the widespread pain subjectively perceived by patients was between +25.9% and +27.5%. Also, significant differences between threshold pain tolerance of tender points located on the upper and lower body (1.9 ± 0.5 kg/cm2 vs. 2.6 ± 0.7 kg/cm2; respectively were observed. However, no significant differences were found between threshold pain tolerance of tender points located on dominant and non-dominant sides (2.1 ± 0.5 kg/cm2 e 2.1 ± 0.6 kg/cm2; respectively. Additionally, the analysis showed significant correlations between pain and patient`s daily life in: FIQ total score, physical function, feel good, job ability and fatigue. Conclusions: the women with FM show higher widespread pain subjectively perceived than threshold pain tolerance on tender points. Furthermore, the pain suffered by the patients with FM, especially that located on the upper body, either on the dominant or on the non-dominant side, has a negative

  6. CONSIDERATIONS UPON DESIGNING MODULAR CONSTRUCTIONS FOR IMPROVING THE PRODUCTS ASSEMBLING, MAINTENANCE AND RECYCLING PROCESSES

    Directory of Open Access Journals (Sweden)

    BÂRSAN Lucian

    2015-11-01

    Full Text Available Modular constructions are frequently used in industry because of their multiple advantages. Used from the antiquity as a measuring system that ensured good proportions for the objects or buildings, the module is used in present industry as a tool for improving the product maintenance, repair, upgrading, and/or recycling. Modular constructions can be assembled and disassembled easily, facilitating the postuse actions like subassemblies reuse, or materials recovering for the recycling process. An important aspect of this paper is that designers should create the modular solution even from the conceptual design stage and build a structure of functions based on well motivated arguments and which can easily be brake out according to technological possibilities, product functioning and assembly solutions.

  7. Privileging Younger Children's Voices in Research: Use of Drawings and a Co-Construction Process

    Directory of Open Access Journals (Sweden)

    Joanna Tay-Lim PhD Student

    2013-02-01

    Full Text Available The growing acknowledgement of the value of listening to children's views and experiences in social research, popularly termed as “listening to their voices,” brings with it methodological consequences. Regarding children as expert informants about their own lives carries with it the simultaneous call for researchers to be experts in developing and employing appropriate strategies that can effectively elicit the insights that children can bring to a research topic. With younger children, the use of participatory methodologies has been foregrounded as the key to unlocking their potential to contribute rich and useful perspectives to inform research into their lives. This article explores the usefulness of employing preschoolers' drawings within the context of a co-construction process to facilitate the children's construction of ideas and reinforce their voices in research. The case is made that the quality of the dialogical engagement is as important as the drawing itself, and both visual images and the verbal exchanges are central to the children's meaning-making process. In the co-construction process, both adult and child are (ideally equal players and the resulting dialogical process plays a major role in the constitution of the phenomena. The role of the researcher as the co-constructor can be a challenging one because it entails engaging and supporting children's views and the expression of these views. The discussion and illustrations from the first author's research projects contribute to the literature base on positioning preschool children as valid social actors in their communities. We operate through an ethos of empowerment of all participants, and aim for participatory research practice which has at its heart an active involvement in promoting the rights of children as citizens with voice and power. (Pascal & Bertram, 2009, p. 249

  8. Constructed Wetlands

    Science.gov (United States)

    these systems can improve water quality, engineers and scientists construct systems that replicate the functions of natural wetlands. Constructed wetlands are treatment systems that use natural processes

  9. A midas plugin to enable construction of reproducible web-based image processing pipelines.

    Science.gov (United States)

    Grauer, Michael; Reynolds, Patrick; Hoogstoel, Marion; Budin, Francois; Styner, Martin A; Oguz, Ipek

    2013-01-01

    Image processing is an important quantitative technique for neuroscience researchers, but difficult for those who lack experience in the field. In this paper we present a web-based platform that allows an expert to create a brain image processing pipeline, enabling execution of that pipeline even by those biomedical researchers with limited image processing knowledge. These tools are implemented as a plugin for Midas, an open-source toolkit for creating web based scientific data storage and processing platforms. Using this plugin, an image processing expert can construct a pipeline, create a web-based User Interface, manage jobs, and visualize intermediate results. Pipelines are executed on a grid computing platform using BatchMake and HTCondor. This represents a new capability for biomedical researchers and offers an innovative platform for scientific collaboration. Current tools work well, but can be inaccessible for those lacking image processing expertise. Using this plugin, researchers in collaboration with image processing experts can create workflows with reasonable default settings and streamlined user interfaces, and data can be processed easily from a lab environment without the need for a powerful desktop computer. This platform allows simplified troubleshooting, centralized maintenance, and easy data sharing with collaborators. These capabilities enable reproducible science by sharing datasets and processing pipelines between collaborators. In this paper, we present a description of this innovative Midas plugin, along with results obtained from building and executing several ITK based image processing workflows for diffusion weighted MRI (DW MRI) of rodent brain images, as well as recommendations for building automated image processing pipelines. Although the particular image processing pipelines developed were focused on rodent brain MRI, the presented plugin can be used to support any executable or script-based pipeline.

  10. A Midas Plugin to Enable Construction of Reproducible Web-based Image Processing Pipelines

    Directory of Open Access Journals (Sweden)

    Michael eGrauer

    2013-12-01

    Full Text Available Image processing is an important quantitative technique for neuroscience researchers, but difficult for those who lack experience in the field. In this paper we present a web-based platform that allows an expert to create a brain image processing pipeline, enabling execution of that pipeline even by those biomedical researchers with limited image processing knowledge. These tools are implemented as a plugin for Midas, an open-source toolkit for creating web based scientific data storage and processing platforms. Using this plugin, an image processing expert can construct a pipeline, create a web-based UI, manage jobs, and visualize intermediate results. Pipelines are executed on a grid computing platform using BatchMake and HTCondor. This represents a new capability for biomedical researchers and offers an innovative platform for scientific collaboration. Current tools work well, but can be inaccessible for those lacking image processing expertise. Using this plugin, researchers in collaboration with image processing experts can create workflows with reasonable default settings and streamlined user interfaces, and data can be processed easily from a lab environment without the need for a powerful desktop computer. This platform allows simplified troubleshooting, centralized maintenance, and easy data sharing with collaborators. These capabilities enable reproducible science by sharing datasets and processing pipelines between collaborators. In this paper, we present a description of this innovative Midas plugin, along with results obtained from building and executing several ITK based image processing workflows for diffusion weighted MRI (DW MRI of rodent brain images, as well as recommendations for building automated image processing pipelines. Although the particular image processing pipelines developed were focused on rodent brain MRI, the presented plugin can be used to support any executable or script-based pipeline.

  11. Caracterização do processo de rigor mortis do músculo Ilio-ischiocaudalis de jacaré-do-pantanal (Caiman crocodilus yacare e maciez da carne Characterization of rigor mortis process of muscle Ilio-ischiocaudalis of pantanal alligator (Caiman crocodilus yacare and meat tenderness

    Directory of Open Access Journals (Sweden)

    Juliana Paulino Vieira

    2012-03-01

    Full Text Available Este trabalho utilizou seis carcaças de jacaré-do-pantanal (Caiman crocodilus yacare com o objetivo de caracterizar o processo de rigor mortis do músculo Ílio-ischiocaudalis durante o resfriamento industrial e avaliar a maciez dessa carne. Os jacarés foram escolhidos aleatoriamente e abatidos na Cooperativa de Criadores do Jacaré do Pantanal (COOCRIJAPAN, Cáceres, Mato Grosso. Após a sangria, aferiu-se as variações das temperaturas da câmara de resfriamento, das carcaças e o pH. Foram colhidas amostras para determinação do comprimento de sarcômero, da força de cisalhamento e perdas por cozimento em diferentes intervalos de tempo (0,5, 3, 5, 7, 10, 12, 15, 24 e 36h. A temperatura da câmara de resfriamento variou de 2,6°C (0,5h a 0,9°C (36h e a temperatura média das carcaças variou de 21,0°C a 4,2°C, respectivamente. O pH médio inicial do músculo foi de 6,7 e o final 5,6 e a contração máxima do sarcômero do músculo Ilio-ischiocaudalis ocorreu na 15ª hora após a sangria (1,5µm. Essa carne apresentou força de cisalhamento menor que 6,0kg.This paper studied six pantanal alligators (Caiman crocodilus yacare carcass with goal of rigor mortis process characterization of Ilio-ischiocaudalis muscle during industrial cooling and meat tenderness. The alligators were randomly assembled and slaughtered at Cooperativa de Criadores do Jacaré do Pantanal (COOCRIJAPAN - Cáceres- Mato Grosso After exsanguination, were mensured temperature of chilling room and carcasses, pH and samples were collected for determination the sarcomere length, shear force and cooking loss at different times (0.5, 3, 5, 7, 10, 12, 15, 24 and 36 hours. The temperature of chilling room varied from 2.6°C (0.5h to 0.9°C (36h and the mean carcass temperature from 21.0°C to 4.2°C, respectively. The mean initial pH of the muscle was 6.7 and the final was 5.6. The smallest sarcomere size ocurred at 15 hours after exsanguination (1.5µm. This meat presents

  12. Mathematical modelling of the process of quality control of construction products

    Directory of Open Access Journals (Sweden)

    Pogorelov Vadim

    2017-01-01

    Full Text Available The study presents the results of years of research in the field of quality management of industrial production construction production, based on mathematical modelling techniques, process and results of implementing the developed programme of monitoring and quality control in the production process of the enterprise. The aim of this work is the presentation of scientific community of the practical results of mathematical modelling in application programs. In the course of the research addressed the description of the applied mathematical models, views, practical results of its application in the applied field to assess quality control. The authors used this mathematical model in practice. The article presents the results of applying this model. The authors developed the experimental software management and quality assessment by using mathematical modeling methods. The authors continue research in this direction to improve the diagnostic systems and quality management systems based on mathematical modeling methods prognostic and diagnostic processes.

  13. Construction of mammographic examination process ontology using bottom-up hierarchical task analysis.

    Science.gov (United States)

    Yagahara, Ayako; Yokooka, Yuki; Jiang, Guoqian; Tsuji, Shintarou; Fukuda, Akihisa; Nishimoto, Naoki; Kurowarabi, Kunio; Ogasawara, Katsuhiko

    2018-03-01

    Describing complex mammography examination processes is important for improving the quality of mammograms. It is often difficult for experienced radiologic technologists to explain the process because their techniques depend on their experience and intuition. In our previous study, we analyzed the process using a new bottom-up hierarchical task analysis and identified key components of the process. Leveraging the results of the previous study, the purpose of this study was to construct a mammographic examination process ontology to formally describe the relationships between the process and image evaluation criteria to improve the quality of mammograms. First, we identified and created root classes: task, plan, and clinical image evaluation (CIE). Second, we described an "is-a" relation referring to the result of the previous study and the structure of the CIE. Third, the procedural steps in the ontology were described using the new properties: "isPerformedBefore," "isPerformedAfter," and "isPerformedAfterIfNecessary." Finally, the relationships between tasks and CIEs were described using the "isAffectedBy" property to represent the influence of the process on image quality. In total, there were 219 classes in the ontology. By introducing new properties related to the process flow, a sophisticated mammography examination process could be visualized. In relationships between tasks and CIEs, it became clear that the tasks affecting the evaluation criteria related to positioning were greater in number than those for image quality. We developed a mammographic examination process ontology that makes knowledge explicit for a comprehensive mammography process. Our research will support education and help promote knowledge sharing about mammography examination expertise.

  14. Technique for Determination of Rational Boundaries in Combining Construction and Installation Processes Based on Quantitative Estimation of Technological Connections

    Science.gov (United States)

    Gusev, E. V.; Mukhametzyanov, Z. R.; Razyapov, R. V.

    2017-11-01

    The problems of the existing methods for the determination of combining and technologically interlinked construction processes and activities are considered under the modern construction conditions of various facilities. The necessity to identify common parameters that characterize the interaction nature of all the technology-related construction and installation processes and activities is shown. The research of the technologies of construction and installation processes for buildings and structures with the goal of determining a common parameter for evaluating the relationship between technologically interconnected processes and construction works are conducted. The result of this research was to identify the quantitative evaluation of interaction construction and installation processes and activities in a minimum technologically necessary volume of the previous process allowing one to plan and organize the execution of a subsequent technologically interconnected process. The quantitative evaluation is used as the basis for the calculation of the optimum range of the combination of processes and activities. The calculation method is based on the use of the graph theory. The authors applied a generic characterization parameter to reveal the technological links between construction and installation processes, and the proposed technique has adaptive properties which are key for wide use in organizational decisions forming. The article provides a written practical significance of the developed technique.

  15. Critical ICT-Inhibiting Factors on IBS Production Management Processes in the Malaysia Construction Industry

    Science.gov (United States)

    Ern, Peniel Ang Soon; Kasim, Narimah; Hamid, Zuhairi Abd; Chen, Goh Kai

    2017-10-01

    Industrialized Building System (IBS) is one of the approaches that had been introduced as an alternative to conventional building method where it becomes the new strategy of enhancing the sustainable construction in current industries while spearheading a huge advancement of benefits with green constructions into the existing industries. The IBS approach is actively promoted through several strategies and incentives as an alternative to conventional building methods. Extensive uptakes of modern Information Communication Technology (ICT) applications are able to support the different IBS processes for effective production. However, it is argued that ICT uptake at the organisational level is still in its infancy. This raises the importance to identify critical inhibitors which are inhibing the effective uptake of ICT in the IBS production management process. Critical inhibitors to ICT uptake were identified through questionnaire survey with the IBS industry stakeholders. The mean index and critical t-values are generated with the use of the quantitative tool, Statistical Package for Social Sciences (SPSS). The top ten priority ranked inhibitors reflect the Cost, People and Process elements to ICT uptake. High costs in acquiring the technologies and resistance to change were some main concerns from the findings.

  16. Overcoming ICT Barriers in IBS Management Process in Malaysia Construction Industry

    Directory of Open Access Journals (Sweden)

    Soon Ern Peniel Ang

    2017-01-01

    Full Text Available As the result of government’s initiative and future outlook in uprising the awareness towards the implementation of sustainable elements in construction industries, the Industrialized Building System (IBS is one of the approaches that had been introduced as an alternative to conventional building method and produce the new strategy of reducing the waste of materials in construction. The IBS approach is actively promoted through several strategies and incentives as an alternative to conventional building methods. Extensive uptakes of modern Information Communication Technology (ICT applications are able to support the different IBS processes for effective production. However, it is argued that ICT uptake at the organizational level needs to be regularly improved. Thus, this paper fulfills the need to identify the critical barriers to ICT employment and highlighting the ICT drivers in enhancing the IBS management process. Critical barriers and drivers to ICT uptake were identified through questionnaire survey with industry stakeholders and were analyzed using mean index and critical t-value with the use of SPSS software. The critical drivers are top management support and commitment and improving the availability of the technologies. The critical drivers which were identified are significant in ensuring the enhancement of ICT implementation. Hence, any system in place should avoid the highest ranked barriers or seek to alleviate their impact by focusing on the identified drivers in order to enhance implementation of ICT in IBS process management.

  17. Enabling Ethical Code Embeddedness in Construction Organizations: A Review of Process Assessment Approach.

    Science.gov (United States)

    Oladinrin, Olugbenga Timo; Ho, Christabel Man-Fong

    2016-08-01

    Several researchers have identified codes of ethics (CoEs) as tools that stimulate positive ethical behavior by shaping the organisational decision-making process, but few have considered the information needed for code implementation. Beyond being a legal and moral responsibility, ethical behavior needs to become an organisational priority, which requires an alignment process that integrates employee behavior with the organisation's ethical standards. This paper discusses processes for the responsible implementation of CoEs based on an extensive review of the literature. The internationally recognized European Foundation for Quality Management Excellence Model (EFQM model) is proposed as a suitable framework for assessing an organisation's ethical performance, including CoE embeddedness. The findings presented herein have both practical and research implications. They will encourage construction practitioners to shift their attention from ethical policies to possible enablers of CoE implementation and serve as a foundation for further research on ethical performance evaluation using the EFQM model. This is the first paper to discuss the model's use in the context of ethics in construction practice.

  18. Constructal design of a blast furnace iron-making process based on multi-objective optimization

    International Nuclear Information System (INIS)

    Liu, Xiong; Chen, Lingen; Feng, Huijun; Qin, Xiaoyong; Sun, Fengrui

    2016-01-01

    For the fixed total raw material cost and based on constructal theory and finite time thermodynamics, a BFIM (blast furnace iron-making) process is optimized by taking a complex function as optimization objective. The complex function is integrated with HM (hot metal) yield and useful energy of the BF (blast furnace). The optimal cost distribution of raw materials (namely “generalized optimal construct”) is obtained. The effects of some parameters, such as oxygen enrichment, blast temperature and pulverized coal dosage, on the optimization results are analyzed. The results show that the HM yield, useful energy and complex function are, respectively, increased by 3.13%, 2.66% and 2.90% after generalized constructal optimization. The utilization efficiencies of the BFG (blast furnace gas) and slag are 41.3% and 57.1%, respectively, which means that the utilization potentials of the BFG and slag can be further exploited. Increasing pulverized coal dosage and decreasing the agglomerate ratio can increase the complex function. The performance the BFIM process can be improved by adjusting the oxygen enrichment, blast temperature, blast dosage, pressure ratio of the Brayton cycle's air compressor and relative pressure drop of the air compressor inlet to their optimal values, respectively, which are new findings of this paper. - Highlights: • Constructal optimization of a blast furnace iron-making process is performed. • Finite time thermodynamic model of open Brayton cycle is adopted. • Weighting function is taken as optimization objective. • Optimal cost distribution of the raw materials is obtained.

  19. Construction of six-quark states from parity eigenfunctions for n-n processes

    International Nuclear Information System (INIS)

    Stancu, F.; Wilets, L.

    1987-01-01

    The work presented is to classify and construct six-quark states as totally antisymmetric states of six fermions, each described by orbital, spin, isospin, and color degrees of freedom. A classification scheme is proposed based on parity eigenfunctions. The single-particle hamiltonian is assumed to be reflectionally and axially symmetric and can be obtained, for example, from constrained Hartree-Fock or solition mean field theories. The ultimate aim is to study N-N processes in the context of the (relativistic) soliton bag model

  20. Application of Strategic Management Principles as Tool to Improve Quality of Construction Technological Process

    Science.gov (United States)

    Kluchnikova, O.; Pobegaylov, O.

    2017-11-01

    The article focuses on the basic theory and practical aspects of the strategic management improving in terms of enhancing the quality of a technological process: these aspects have been proven experimentally by their introduction in company operations. The authors have worked out some proposals aimed at the selection of an optimal supplier for building companies as well as the algorithm for the analysis and optimization of a construction company basing on scientific and practical research as well as on the experimental data obtained in the experiment.

  1. Process evaluation of a Toolbox-training program for construction foremen in Denmark

    DEFF Research Database (Denmark)

    Jeschke, Katharina Christiane; Kines, Pete; Rasmussen, Liselotte

    2017-01-01

    foremen’s knowledge and communication skills in daily planning of work tasks and their related OSH risks on construction sites. The program builds on the popular 'toolbox meeting' concept, however there is very little research evaluating these types of meetings. This article describes the development...... and revised until the final version after the fifth group. The evaluation utilized an action research strategy with a mixed–methods approach of triangulating questionnaire, interview, and observation data. Process evaluation results showed that the eight Toolbox-training topics were relevant and useful...

  2. Editorial Management serials online: construction process, publication and administration with free software solutions

    Directory of Open Access Journals (Sweden)

    Andrés Vuotto

    2013-10-01

    Full Text Available Initially raised the main points to consider and develop the planning and construction of an online publication of a scientific nature, emphasizing the process and editorial functions, document preservation, access management, indexing and visibility. In the second part of the paper presents a proposed solution to every aspect previously described, highlighting the work of the information professional and optimizing time, cost and results offered free software, from a concrete experience with the system Open Journal System under the journal portal of the Faculty of Humanities at the Universidad Nacional de Mar del Plata.

  3. Design and construction of a batch oven for investigation of industrial continuous baking processes

    DEFF Research Database (Denmark)

    Stenby Andresen, Mette; Risum, Jørgen; Adler-Nissen, Jens

    2013-01-01

    A new batch oven has been constructed to mimic industrial convection tunnel ovens for research and development of continuous baking processes. The process parameters (air flow, air temperature, air humidity, height of baking area and the baking band velocity) are therefore highly controllable...... and adjustable over a wide range of settings. It is possible to monitor the product weight and temperature continuously during baking. The simultaneous measuring of mass and a window allowing for visual (e.g., by video recording) control is unique for this experimental batch oven. Two validation steps have been...... carried out. The uniformity of heating in the oven was assessed by measurements of local heat transfer coefficients and confirmed by baking tests. The methods showed that the oven is able to heat and bake uniformly across the baking area. Hereafter, the oven was validated against a commercial 10-m tunnel...

  4. Mastering the political Process of Building Innovation Networks - A Case from the Danish Construction Industry

    DEFF Research Database (Denmark)

    Stissing Jensen, Jens; Koch, Christian; Thomassen, Mikkel

    2008-01-01

    Drawing on network of innovation and organizational politics perspectives this paper analyzes the role of an innovation broker organization in developing and supporting an inter-organizational innovation process in the Danish construction industry. The aim is to implement an ICT-based product...... configuration tool to support the production, sale, and installation of balconies. It is suggested that the innovation broker was successful in stabilizing the innovation process by supplying minimal structures which provided a template which facilitated a combination of individual flexibility and overall...... the network. The innovation thus grew strong enough to replace existing practices and identities and to embed new ones into new organizational structures and a new business-concept...

  5. 48 CFR 47.104-5 - Citation of Government rate tenders.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Citation of Government rate tenders. 47.104-5 Section 47.104-5 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT TRANSPORTATION General 47.104-5 Citation of Government rate tenders. When 49 U...

  6. Adaptive constructive processes and memory accuracy: Consequences of counterfactual simulations in young and older adults

    Science.gov (United States)

    Gerlach, Kathy D.; Dornblaser, David W.; Schacter, Daniel L.

    2013-01-01

    People frequently engage in counterfactual thinking: mental simulations of alternative outcomes to past events. Like simulations of future events, counterfactual simulations serve adaptive functions. However, future simulation can also result in various kinds of distortions and has thus been characterized as an adaptive constructive process. Here we approach counterfactual thinking as such and examine whether it can distort memory for actual events. In Experiments 1a/b, young and older adults imagined themselves experiencing different scenarios. Participants then imagined the same scenario again, engaged in no further simulation of a scenario, or imagined a counterfactual outcome. On a subsequent recognition test, participants were more likely to make false alarms to counterfactual lures than novel scenarios. Older adults were more prone to these memory errors than younger adults. In Experiment 2, younger and older participants selected and performed different actions, then recalled performing some of those actions, imagined performing alternative actions to some of the selected actions, and did not imagine others. Participants, especially older adults, were more likely to falsely remember counterfactual actions than novel actions as previously performed. The findings suggest that counterfactual thinking can cause source confusion based on internally generated misinformation, consistent with its characterization as an adaptive constructive process. PMID:23560477

  7. Adaptive constructive processes and memory accuracy: consequences of counterfactual simulations in young and older adults.

    Science.gov (United States)

    Gerlach, Kathy D; Dornblaser, David W; Schacter, Daniel L

    2014-01-01

    People frequently engage in counterfactual thinking: mental simulations of alternative outcomes to past events. Like simulations of future events, counterfactual simulations serve adaptive functions. However, future simulation can also result in various kinds of distortions and has thus been characterised as an adaptive constructive process. Here we approach counterfactual thinking as such and examine whether it can distort memory for actual events. In Experiments 1a/b young and older adults imagined themselves experiencing different scenarios. Participants then imagined the same scenario again, engaged in no further simulation of a scenario, or imagined a counterfactual outcome. On a subsequent recognition test participants were more likely to make false alarms to counterfactual lures than novel scenarios. Older adults were more prone to these memory errors than younger adults. In Experiment 2 younger and older participants selected and performed different actions, then recalled performing some of those actions, imagined performing alternative actions to some of the selected actions, and did not imagine others. Participants, especially older adults, were more likely to falsely remember counterfactual actions than novel actions as previously performed. The findings suggest that counterfactual thinking can cause source confusion based on internally generated misinformation, consistent with its characterisation as an adaptive constructive process.

  8. Survival of Escherichia coli O157:H7 in needle-tenderized dry cured Westphalian ham.

    Science.gov (United States)

    Graumann, Gary H; Holley, Richard A

    2007-09-15

    Westphalian ham is a dry cured, ready-to-eat product that is manufactured without a lethal heat treatment. Hams are preserved by a process that involves curing, fermenting, smoking and drying, which may take 3 months or more to complete. The process can be accelerated by tenderizing the meat with solid needles, to increase the rate of cure-salt diffusion throughout muscle tissues. In this study, intact hams were immersed in a solution containing a five strain cocktail of Escherichia coli O157:H7 at 8 log cfu/mL, to determine whether needle treatment before cure application would internalize organisms from the surface. In two trials, the survival of E. coli O157:H7 on external surfaces and within deep tissues after needle treatment was followed during the ripening of hams. The injured E. coli O157:H7 cells were recovered by plating samples on pre-poured Tryptic Soy Agar plates which were incubated for 3 to 4 h at 35 degrees C, overlaid with Sorbitol MacConkey Agar containing cefixime and tellurite and re-incubated at 35 degrees C for 48 to 72 h. Inoculated-injected hams initially carried E. coli O157:H7 at numbers of 7.3 and 4.6 log cfu/g E. coli O157:H7 on the surface and inside, respectively. After 112 d of ripening, which included 79 d of drying, no E. coli O157:H7 were detected at the surface of hams following enrichment, whereas in deep tissue the organism was recovered at numbers of 3.1 log cfu/g. The Westphalian ham ripening procedure evidently was not adequate to eliminate E. coli O157:H7 internalized by needle tenderization.

  9. Health resource utilisation costs in acute patients with persistent midline cervical tenderness following road trauma.

    Science.gov (United States)

    Ackland, Helen M; Wolfe, Rory; Cameron, Peter A; Cooper, D James; Malham, Gregory M; Varma, Dinesh K; Fitt, Gregory J; Rosenfeld, Jeffrey V; Liew, Susan M

    2012-11-01

    The costs associated with patients discharged with isolated clinician-elicited persistent midline tenderness and negative computed tomography (CT) findings have not been reported. Our aim was to determine the association of acute and post-acute patient and injury characteristics with health resource costs in such patients following road trauma. In a prospective cohort study, road trauma patients presenting with isolated persistent midline cervical tenderness and negative CT, who underwent additional acute imaging with MRI, were recruited. Patients were reviewed in the outpatient spine clinic following discharge, and were followed up at 6 and 12 months post-trauma. Multivariate linear regression was used to assess the association of injury mechanism, clinical assessment, socioeconomic factors and outcome findings with health resource costs generated in the acute hospital and post-acute periods. There were 64 patients recruited, of whom 24 (38%) had cervical spine injury detected on MRI. Of these, 2 patients were managed operatively, 6 were treated in cervical collars and 16 had the cervical spine cleared and were discharged. At 12 months, there were 25 patients (44%) with residual neck pain, and 22 (39%) with neck-related disability. The mean total cost was AUD $10,153 (SD=10,791) and the median was $4015 (IQR: 3044-6709). Transient neurologic deficit, which fully resolved early in the emergency department, was independently associated with higher marginal mean acute costs (represented in the analysis by the β coefficient) by $3521 (95% CI: 50-6880). Low education standard (β coefficient: $5988, 95% CI: 822-13,317), neck pain at 6 months (β coefficient: $4017, 95% CI: 426-9254) and history of transient neurologic deficit (β coefficient: $8471, 95% CI: 1766-18,334) were associated with increased post-acute costs. In a homogeneous group of road trauma patients with non fracture-related persistent midline cervical tenderness, health resource costs varied

  10. Effect of the callipyge phenotype and cooking method on tenderness of several major lamb muscles.

    Science.gov (United States)

    Shackelford, S D; Wheeler, T L; Koohmaraie, M

    1997-08-01

    We conducted three experiments to determine the effects of the callipyge phenotype on the tenderness of several major lamb muscles and to determine the effect of method of cookery on the tenderness of callipyge lamb at 7 d postmortem. In Exp. 1, chops from normal (n = 23) and callipyge (n = 16) carcasses were open-hearth-broiled. Warner-Bratzler shear force values of longissimus, gluteus medius, semimembranosus, biceps femoris, semitendinosus, adductor, and quadriceps femoris were 123, 44, 28, 26, 19, 16, and 13% greater, respectively, for callipyge (P lamb carcasses (n = 60). Callipyge chops were less tender than normal chops (P cooking method, callipyge samples were less juicy than normal samples (P < .05). These data demonstrate that the callipyge phenotype will likely reduce consumer satisfaction due to reduced tenderness and juiciness; however, reduced tenderness in callipyge leg muscles could be prevented by ovenroasting.

  11. Preference Construction Processes for Renewable Energies: Assessing the Influence of Sustainability Information and Decision Support Methods

    Directory of Open Access Journals (Sweden)

    Kiyotada Hayashi

    2016-11-01

    Full Text Available Sustainability information and decision support can be two important driving forces for making sustainable transitions in society. However, not enough knowledge is available on the effectiveness of these two factors. Here, we conducted an experimental study to support the hypotheses that acquisition of sustainability information and use of decision support methods consistently construct preferences for renewable power generation technologies that use solar power, wind power, small-scale hydroelectric power, geothermal power, wood biomass, or biogas as energy sources. The sustainability information was prepared using a renewable energy-focused input-output model of Japan and contained life cycle greenhouse gas emissions, electricity generation costs, and job creation. We measured rank-ordered preferences in the following four steps in experimental workshops conducted for municipal officials: provision of (1 energy-source names; (2 sustainability information; (3 additional explanation of public value; and (4 knowledge and techniques about multi-attribute value functions. The degree of changes in preference orders was evaluated using Spearman’s rank correlation coefficient. The consistency of rank-ordered preferences among participants was determined by using the maximum eigenvalue for the coefficient matrix. The results show: (1 the individual preferences evolved drastically in response to the sustainability information and the decision support method; and (2 the rank-ordered preferences were more consistent during the preference construction processes. These results indicate that provision of sustainability information, coupled with decision support methods, is effective for decision making regarding renewable energies.

  12. Application for approval to construct the Waste Receiving And Processing facility

    International Nuclear Information System (INIS)

    1993-02-01

    The following Application For Approval Of Construction is being submitted by the US Department of Energy, Richland Field Office pursuant to 40 CFR 61.07, ''Application for Approval of Construction or Modification,'' for the Waste Receiving and Processing (WRAP) Module 1 facility (also referred to as WRAP 1). The WRAP 1 facility will be a new source of radioactive emissions to the atmosphere. The WRAP 1 facility will be housed in the new 2336-W Building, which will be located in the 200 West Area south of 23rd Street and west of Dayton Avenue. The 200 West Area is located within the boundary of the Hanford Site. The mission of the WRAP 1 facility is to examine, assay, characterize, treat, and repackage solid radioactive and mixed waste to enable permanent disposal of the waste in accordance with all applicable regulations. The solid wastes to be handled in the WRAP 1 facility include low-level waste (LLW), Transuranic (TRU) waste, TRU mixed waste, and low-level mixed waste (LLMW). The WRAP 1 facility will only accept contact handled (CH) waste containers. CH waste is a waste category whose external surface dose rate does not exceed 200 mrem/h. These containers have a surface dose rate of less than 200 mrem/h

  13. Guidebook on design, construction and operation of pilot plants for uranium ore processing

    International Nuclear Information System (INIS)

    1990-01-01

    The design, construction and operation of a pilot plant are often important stages in the development of a project for the production of uranium concentrates. Since building and operating a pilot plant is very costly and may not always be required, it is important that such a plant be built only after several prerequisites have been met. The main purpose of this guidebook is to discuss the objectives of a pilot plant and its proper role in the overall project. Given the wide range of conditions under which a pilot plant may be designed and operated, it is not possible to provide specific details. Instead, this book discusses the rationale for a pilot plant and provides guidelines with suggested solutions for a variety of problems that may be encountered. This guidebook is part of a series of Technical Reports on uranium ore processing being prepared by the IAEA's Division of Nuclear Fuel Cycle and Waste Management. 42 refs, 7 figs, 3 tabs

  14. Communication and interaction with the society inside of a construction process of waste disposal - relevant aspects

    International Nuclear Information System (INIS)

    Almeida, Ivan Pedro Salati de

    2010-01-01

    The CIS Project was established in order to analyze aspects related to the process of communication and interaction with society in the construction of a waste disposal and to propose measures that can improve the performance of organs responsible of this undertaking. This document is the first product of the discussion of a multidisciplinary group consisting of representatives from CNEN - Brazilian Nuclear Energy Commission, INB - Brazilian Nuclear Industries, ELETRONUCLEAR and CTMSP - Navy Technology Center. This document aims to provide a data base to the responsible about radioactive waste disposals decision. Therefore tries to illustrate and to characterize the situation related to the subject Communication and Interaction with Society, based on works about the subject and examples of national or other countries

  15. [Processes in the construction of the Brazilian National Health Promotion Policy].

    Science.gov (United States)

    Ferreira Neto, João Leite; Kind, Luciana; Resende, Maria Carolina Costa; Colen, Natália Silva

    2013-10-01

    We investigated the processes involved in the construction of the Brazilian National Health Promotion Policy (PNPS) through the analysis of three documents produced by the Ministry of Health from 2002 to 2005 and the final text of the National Health Promotion Policy, approved in 2006. We interviewed five subjects who participated in drafting the PNPS, three of whom were Ministry of Health administrators, plus two researchers. The documents were explored with discourse analysis. The article contributes to the debate on the development of the PNPS. Health promotion showed various points of disagreement, which led to the delay in the document's final approval. International induction via funding proved to be a crucial element for defining the final wording of the PNPS, reestablishing the emphasis (subject to criticism) on lifestyle changes in its "Actions". The article highlights the negotiated consensus that led to the creation of the PNPS Management Committee, with participation by various sub-sectors, an innovative structure within the Ministry of Health.

  16. Constructions of accountability in child protection workers decision-making processes

    DEFF Research Database (Denmark)

    Schrøder, Ida Marie

    2014-01-01

    collected from three Danish local governments and consists of 24 qualitative interviews with child protection workers, leaders and economic consultants, 12 observations of team meetings and a quantitative survey of 150 cases. The study ends summer 2014 and the results of the research will be utilized...... construction of accountability as relational effects of these new forms of accounting practice. The paper draws on the preliminary results from a 2 ½ year mixed method study of how budgeting and accounting practice influences the processes of decision-making in child protection work. The data has been...... systems – such as setting standards or deciding on the delegation of decision-making authority. Using Actor-network theory as a methodological and analytical approach, it furthermore becomes clear how the types of accountability are enacted as effects, not only by the technologies offered to support...

  17. Phantom construction by the lithography process for micro-radiographic system analysis

    International Nuclear Information System (INIS)

    Rocha, Henrique de Souza; Lopes, Ricardo Tadeu; Macedo, Pedro Ivo M.T.

    2002-01-01

    In this work it was analyzed the viability of the use of a standard phantom, manufactured by the lithograph process, for obtaining the space resolution of a microradiographic system. The project predicted the construction of three types of phantoms, one for obtaining the function of modulation transfer in systems with resolutions between 10 and 60 μm and other two for the direct reading of the space resolution, in systems with resolution between 10 and 100 μm and between 100 and 400 μm. Despite of the results have been obtained from preliminary samples of the built phantoms, it was possible to find good results in relation to the space resolution. Using a reference system formed by a conventional microfocused X-rays tube with a CCD detector, was possible to match a space resolution of 15 μm in 20% of modulation in a system with a estimated resolution of 12,5 μm. (author)

  18. Recent advances of pore system construction in zeolite-catalyzed chemical industry processes.

    Science.gov (United States)

    Shi, Jing; Wang, Yangdong; Yang, Weimin; Tang, Yi; Xie, Zaiku

    2015-12-21

    The kaleidoscopic applications of zeolite catalysts (zeo-catalysts) in petrochemical processes has been considered as one of the major accomplishments in recent decades. About twenty types of zeolite have been industrially applied so far, and their versatile porous architectures have contributed their most essential features to affect the catalytic efficiency. This review depicts the evolution of pore models in zeolite catalysts accompanied by the increase in industrial and environmental demands. The indispensable roles of modulating pore models are outlined for zeo-catalysts for the enhancement of their catalytic performances in various industrial processes. The zeolites and related industrial processes discussed range from the uni-modal micropore system of zeolite Y (12-ring micropore, 12-R) in fluid catalytic cracking (FCC), zeolite ZSM-5 (10-R) in xylene isomerization and SAPO-34 (8-R) in olefin production to the multi-modal micropore system of MCM-22 (10-R and 12-R pocket) in aromatic alkylation and the hierarchical pores in FCC and catalytic cracking of C4 olefins. The rational construction of pore models, especially hierarchical features, is highlighted with a careful classification from an industrial perspective accompanied by a detailed analysis of the theoretical mechanisms.

  19. Bacterial transformation and biodegradation processes simulation in horizontal subsurface flow constructed wetlands using CWM1-RETRASO.

    Science.gov (United States)

    Llorens, Esther; Saaltink, Maarten W; Poch, Manel; García, Joan

    2011-01-01

    The performance and reliability of the CWM1-RETRASO model for simulating processes in horizontal subsurface flow constructed wetlands (HSSF CWs) and the relative contribution of different microbial reactions to organic matter (COD) removal in a HSSF CW treating urban wastewater were evaluated. Various different approaches with diverse influent configurations were simulated. According to the simulations, anaerobic processes were more widespread in the simulated wetland and contributed to a higher COD removal rate [72-79%] than anoxic [0-1%] and aerobic reactions [20-27%] did. In all the cases tested, the reaction that most contributed to COD removal was methanogenesis [58-73%]. All results provided by the model were in consonance with literature and experimental field observations, suggesting a good performance and reliability of CWM1-RETRASO. According to the good simulation predictions, CWM1-RETRASO is the first mechanistic model able to successfully simulate the processes described by the CWM1 model in HSSF CWs. Copyright © 2010 Elsevier Ltd. All rights reserved.

  20. Global ergonomics strategy in Volkswagen: from the product construction, over the planning until the serial process.

    Science.gov (United States)

    Toledo, Begoña

    2012-01-01

    The Volkswagen Group operates and coordinates the activities of ergonomics from Wolfsburg in Germany and works with its contact persons of every plant and brand of the group towards an integrated proceeding relating to ergonomics. For the ergonomic process it is very important to consider the ergonomics in the whole production process, still from the beginning the conception and construction of the vehicle in the early phases. In these phases there is a big potential to work in the preventive ergonomics and avoid correcting the workstations after start of production. Therefore, it is important to have fluently information in all this phases and identify the potential in each of them. In order to attend these items, Volkswagen has defined different activity fields: coordination of ergonomic standards and the roll-out into all the plants, introducing the ergonomic items in the product development process (PEP), considering the constant improvement of the workplaces in the Volkswagen-Way (KVP and 3P Workshops), taking care of an adequate qualification concept in ergonomics and the intern and extern information exchange within the committees. This topic is established in the industrial engineering of the production area of the group. We are working interdisciplinary with the medical services, human resources, work council and the protection of labor.

  1. 17 CFR 240.14e-2 - Position of subject company with respect to a tender offer.

    Science.gov (United States)

    2010-04-01

    ... disclosing that the subject company: (1) Recommends acceptance or rejection of the bidder's tender offer; (2... accordance with such laws, regulations and policies. (d) Exemption for cross-border tender offers. The... with respect to a tender offer. 240.14e-2 Section 240.14e-2 Commodity and Securities Exchanges...

  2. 41 CFR 102-117.35 - What are the advantages and disadvantages of using GSA's tender of service?

    Science.gov (United States)

    2010-07-01

    ... and disadvantages of using GSA's tender of service? 102-117.35 Section 102-117.35 Public Contracts and...-117.35 What are the advantages and disadvantages of using GSA's tender of service? (a) It is an... damage claims. (b) It is a disadvantage to use GSA's tender of service when: (1) You want an agreement...

  3. 41 CFR 102-118.260 - Must my agency send all quotations, tenders, or contracts with a TSP to GSA?

    Science.gov (United States)

    2010-07-01

    ... quotations, tenders, or contracts with a TSP to GSA? 102-118.260 Section 102-118.260 Public Contracts and... REGULATION TRANSPORTATION 118-TRANSPORTATION PAYMENT AND AUDIT Use of Government Billing Documents Quotations, Tenders Or Contracts § 102-118.260 Must my agency send all quotations, tenders, or contracts with a TSP to...

  4. Development of a validation process for parameters utilized in optimizing construction quality management of pavements.

    Science.gov (United States)

    2006-01-01

    The implementation of an effective performance-based construction quality management requires a tool for determining impacts of construction quality on the life-cycle performance of pavements. This report presents an update on the efforts in the deve...

  5. Flexible software process lines in practice: A metamodel-based approach to effectively construct and manage families of software process models

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Ternité, Thomas; Friedrich, Jan

    2017-01-01

    Process flexibility and adaptability is frequently discussed, and several proposals aim to improve software processes for a given organization-/project context. A software process line (SPrL) is an instrument to systematically construct and manage variable software processes, by combining pre-def......: A metamodel-based approach to effectively construct and manage families of software process models [Ku16]. This paper was published as original research article in the Journal of Systems and Software.......Process flexibility and adaptability is frequently discussed, and several proposals aim to improve software processes for a given organization-/project context. A software process line (SPrL) is an instrument to systematically construct and manage variable software processes, by combining pre...... to construct flexible SPrLs and show its practical application in the German V-Modell XT. We contribute a proven approach that is presented as metamodel fragment for reuse and implementation in further process modeling approaches. This summary refers to the paper Flexible software process lines in practice...

  6. Rejoinder to commentary on Palmatier and Rovner (2015): credibility assessment: Preliminary Process Theory, the polygraph process, and construct validity.

    Science.gov (United States)

    Palmatier, John J; Rovner, Louis

    2015-01-01

    We briefly review comments submitted in response to the target article in this series (Palmatier & Rovner, 2015) arguing that a scientifically defensible construct for the instrumental assessment of credibility (i.e. polygraph) may be found in Barry's Preliminary Process Theory (PPT). Our review of the relevant scientific literature discovered a growing body of converging evidence, particularly from the neurosciences that focus not only on deception, but more broadly on memory, emotion, and the orienting response (OR), leading to this conclusion. After reviewing the submitted comments, we are further convinced, especially as applied scientists, that at this time the most viable direction forward is in the context of the PPT. Concurrently, we candidly acknowledge that research must be conducted to address not only commentator concerns but, if warranted, modification of existing theory. Although disagreement continues to exist regarding the order in which questions are asked, the most significant finding, is perhaps that not a single commentator argues against this growing, and vital applied science (i.e., the instrumental assessment of credibility - polygraph). Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Names in Psychological Science: Investigating the Processes of Thought Development and the Construction of Personal Identities.

    Science.gov (United States)

    Quaglia, Rocco; Longobardi, Claudio; Mendola, Manuela; Prino, Laura Elvira

    2016-06-01

    This paper examines the name as an issue of interest in the psychology field. In thinking about the role played by names for some of the most important approaches on the psychology panorama, it has been found that the analysis of names can be used as an instrument for the investigation of thought formation processes, or as an element in the process of constructing personal identity. In the first case, the focus is on the so-called "common" names, which designate objects; in the second case, instead, it is on people's given names and on the way they are perceived by their bearers and those who surround them. We have examined both domains, since it is essential to understand how the psychological concepts related to names develop in children's minds, if we aim to grasp their importance as designators of people's internal and external realities. Lastly, we have proposed our own view of the person's name, linked to the relational systems perspective which essentially sees the name as a signifier or "representative" of the child-parent relationship, while the "relationship" is the signified.

  8. The process evaluation of two alternative participatory ergonomics intervention strategies for construction companies.

    Science.gov (United States)

    Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

    2018-03-26

    To gain insight into the process of applying two guidance strategies - face-to-face (F2F) or e-guidance strategy (EC) - of a Participatory Ergonomics (PE) intervention and whether differences between these guidance strategies occur, 12 construction companies were randomly assigned to a strategy. The process evaluation contained reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change of individual workers. Data were assessed by logbooks, and questionnaires and interviews at baseline and/or after six months. Reach was low (1%). Dose delivered (F2F: 63%; EC: 44%), received (F2F: 42%; EC: 16%) were not sufficient. The precision and competence were sufficient for both strategies and satisfaction was strongly affected by dose received. For behavioural change, knowledge (F2F) and culture (EC) changed positively within companies. Neither strategy was delivered as intended. Compliance to the intervention was low, especially for EC. Starting with a face-to-face meeting might lead to higher compliance, especially in the EC group. Practitioner Summary: This study showed that compliance to a face-to-face and an e-guidance strategy is low. To improve the compliance, it is advised to start with a face-to-face meeting to see which parts of the intervention are needed and which guidance strategy can be used for these parts. ISRCTN73075751.

  9. Behavioural manipulation of insect hosts by Baculoviridae as a process of niche construction.

    Science.gov (United States)

    Hamblin, Steven; Tanaka, Mark M

    2013-08-16

    Niche construction has received increasing attention in recent years as a vital force in evolution and examples of niche construction have been identified in a wide variety of taxa, but viruses are conspicuously absent. In this study we explore how niche construction can lead to viruses engineering their hosts (including behavioural manipulation) with feedback on selective pressures for viral transmission and virulence. To illustrate this concept we focus on Baculoviridae, a family of invertebrate viruses that have evolved to modify the feeding behaviour of their lepidopteran hosts and liquefy their cadavers as part of the course of infection. We present a mathematical model showing how niche construction leads to feedback from the behavioural manipulation to the liquefaction of the host, linking the evolution of both of these traits, and show how this association arises from the action of niche construction. Model results show that niche construction is plausible in this system and delineates the conditions under which niche construction will occur. Niche construction in this system is also shown to be sensitive to parameter values that reflect ecological forces. Our model demonstrates that niche construction can be a potent force in viral evolution and can lead to the acquisition and maintenance of the behavioural manipulation and liquefaction traits in Baculoviridae via the niche constructing effects on the host. These results show the potential for niche construction theory to provide new insights into viral evolution.

  10. Fermentation of tender coconut water by probiotic bacteria Bacillus coagulans

    Directory of Open Access Journals (Sweden)

    Aishwarya Singh Gangwar

    2018-04-01

    Full Text Available Coconut water is currently being considered as an elixir for patients suffering from diseases like dengue and malaria as well as chikungunia to provide hydration properties to the body. It has become a popular beverage for many people owing to its palatability and high mineral content. In this study, the growth, survival and fermentation performance of the probiotic bacterium Bacillus coagulans in coconut water was assessed in order to produce a novel non-dairy, probiotic beverage. The species was characterized on the basis of morphology, physiology and biochemical parameters and its probiotic attributes were assessed. Batch fermentations were carried out for 2 days at a constant 37°C, thereafter the samples were subjected to microbiological and chemical analysis. The results suggested that the specie produced lactic acid and was acid and bile tolerant. The pH and titratable acidity of probiotic fermented coconut water were found to be 4.4 and 0.53 % lactic acid, respectively. The viscosity of fermented coconut water increased significantly from an initial 5.13 mPa.s to 5.35 mPa.s because of the increase in soluble solids content due to exopolysaccharide production by B. coagulans during fermentation. Also, the overall acceptability score of probiotic coconut water was higher than tender coconut water, suggesting its feasibility for use as a probiotic beverage.

  11. Decision making in goverment tenders: A formalized qualitative model

    Directory of Open Access Journals (Sweden)

    Štěpán Veselý

    2012-01-01

    Full Text Available The paper presents a simple formalized qualitative model of government tenders (GTs. Qualitative models use just three values: Positive/Increasing, Zero/Constant and Negative/Decreasing. Such quantifiers of trends are the least information intensive. Qualitative models can be useful, since GT evaluation often includes such goals as e.g. efficiency of public purchasing, and variables as e.g. availability of relevant information or subjectivity of judgment, that are difficult to quantify. Hence, a significant fraction of available information about GTs is not of numerical nature, e.g. if availability of relevant information is decreasing then efficiency of public purchasing is decreasing as well. Such equationless relations are studied in this paper. A qualitative model of the function F(Goals, Variables is developed. The model has four goal functions, eight variables, and 39 equationless relations. The model is solved and seven solutions, i.e. scenarios are obtained. All qualitative states, including first and second qualitative derivatives with respect to time, of all variables are specified for each scenario. Any unsteady state behavior of the GT model is described by its transitional oriented graph. There are eight possible transitions among seven scenarios. No a priori knowledge of qualitative modeling is required on the reader’s part.

  12. Highly processable method for the construction of miniature conducting polymer moisture sensors

    Science.gov (United States)

    McGovern, Scott T.; Spinks, Geoffrey M.; Wallace, Gordon G.

    2005-02-01

    A polymer blend incorporating polyaniline (PAn) was used as a sensing medium in the construction of a resistance based humidity sensor. Aniline monomer was polymerised to PAn emeraldine salt (ES) in the presence of poly (butyl acrylate-co-vinyl acetate) and the processable blend was developed by redissolving 1-2 w/w% of the resulting sensing polymer residue in dichloromethane (DCM). Some of this residue was washed in ammonia solution to de-dope the PAn to emeraldine base (EB) to act as a protective layer on the surface of the sensing polymer. This residue was then washed with distilled water until a neutral pH was realised with the waste water, dried and redissolved in DCM at 1-2 w/w% to create a processable blend barrier polymer solution. The final sensor design utilised 125μm polyester insulated platinum wire as conducting electrodes that were dip coated in the PAn ES blend solution and dried in a desiccator. A protective coating was then applied by dip coating in the EB blend solution. The sensors had an overall final thickness of less than 200μm and showed high sensitivity to humidity, low resistance, and good reversibility without hysteresis. The EB protective layer was shown to give more stable and predictable responses to the sensors when placed inside curing epoxies. Polymer based thin film humidity sensors have the advantage that the high processability of the material allows for simple fabrication of a range of geometries including smaller sensor designs. Such sensors may find uses in detecting water content in a number of areas including composite materials, electronic textiles, food/electronics packaging and corrosion detection.

  13. Simulación de procesos constructivos Simulation of constructive processes

    Directory of Open Access Journals (Sweden)

    Adriana Gómez Cabrera

    2010-04-01

    Full Text Available Este trabajo presenta la simulación de eventos discretos como una herramienta para la planeación, reingeniería y el análisis de proyectos de construcción partiendo de un caso real consistente en el proceso constructivo de una estructura en concreto reforzado que incluye cimentación, pedestales, vigas, placa de entrepiso y columnas. Inicialmente se llevó a cabo una labor de campo, donde para cada actividad se registró la duración, las cantidades de obra, los recursos involucrados y las detenciones. Con base en esta información se diseñó un modelo de simulación en el software Arena, respetando la secuencia de actividades, distribuciones de probabilidad definidas para los procesos y los recursos utilizados. El modelo trabaja a través de una interfaz con Microsoft Excel y macros desarrollados en Visual Basic, a través de la cual se le facilita al usuario el ingreso de los datos de entrada (fecha de inicio del proyecto, llegada de los materiales, entre otros. La simulación controla la duración de actividades, utilización de recursos y consumo de materiales. Esta integración de herramientas permite simular diferentes escenarios para el proyec-to y analizar oportunidades de mejora asignando diferentes atributos a variables que afectan el proyecto como: fecha de inicio de actividades, disponibilidad de recursos y materiales, entre otros.This paper presents the simulation of discreet events as a tool for the planning and the analysis of construction projects based on a case study of the constructive process of a reinforced con-crete structure that includes the foundation, pedestals, beams, a slab and columns. Initially a field work was carried out to register duration, resources and delays for each activity. Based on this information a simulation model in the software Arena was developed. The sequence of the activities, probability distribution functions defined for the processes and the resources used were included for each activity

  14. Process evaluation of a multifaceted health program aiming to improve physical activity levels and dietary patterns among construction workers

    NARCIS (Netherlands)

    Viester, L.; Verhagen, E.A.L.M.; Bongers, P.M.; Beek, A.J. van der

    2014-01-01

    Objective: To evaluate the process of a health promotion program, aiming to improve physical activity levels and diet among construction workers. Methods: The process evaluation was conducted after the RE-AIM framework for the evaluation of the public health impact of health promotion interventions.

  15. Simulation-Based Prediction of Equivalent Continuous Noises during Construction Processes.

    Science.gov (United States)

    Zhang, Hong; Pei, Yun

    2016-08-12

    Quantitative prediction of construction noise is crucial to evaluate construction plans to help make decisions to address noise levels. Considering limitations of existing methods for measuring or predicting the construction noise and particularly the equivalent continuous noise level over a period of time, this paper presents a discrete-event simulation method for predicting the construction noise in terms of equivalent continuous level. The noise-calculating models regarding synchronization, propagation and equivalent continuous level are presented. The simulation framework for modeling the noise-affected factors and calculating the equivalent continuous noise by incorporating the noise-calculating models into simulation strategy is proposed. An application study is presented to demonstrate and justify the proposed simulation method in predicting the equivalent continuous noise during construction. The study contributes to provision of a simulation methodology to quantitatively predict the equivalent continuous noise of construction by considering the relevant uncertainties, dynamics and interactions.

  16. Influence of low impact development construction on pollutant process of road-deposited sediments and associated heavy metals.

    Science.gov (United States)

    Ma, Yukun; Gong, Manli; Zhao, Hongtao; Li, Xuyong

    2018-02-01

    Intense Low-Impact Development (LID) construction in China could lead to increasingly severe stormwater and receiving water pollution due to the lack of appropriate regulation for mitigating pollution from LID construction. Samples of road-deposited sediments (RDS) were collected from 50 study sites at seven LID construction stages and four road hierarchies to analyze the pollution process and determine the size of the region influenced by LID construction. Six heavy metals were analyzed, and the RDS index model was adopted to estimate the potential heavy metal load washed off by stormwater runoff. Analysis of variance revealed that the excavation and gravel filling of rain gardens and excavation of porous pavements were critical LID construction stages that contributed the largest masses of RDS per unit area to road surfaces. Although the concentration of heavy metals at LID construction sites was lower than at sites without LID construction, the load of heavy metals washed off from LID construction was much higher. In addition, the sizes of regions influenced by accumulated RDS from LID construction descended in the following order: arterial road (600-775m)>collector road (150-200m)>access road (100-150m)>laneway (20-30m). According to the characteristics of LID construction at the study sites, the potential total solid loads in stormwater throughout China were estimated to reach 36,694t by 2020 and 146,777t by 2030. According to the results of analysis, several recommendations are provided for designing LID construction regulations to mitigate stormwater pollution. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. The Role of Quality in the Adjudication of Public Tenders | Quinot ...

    African Journals Online (AJOL)

    Potchefstroom Electronic Law Journal/Potchefstroomse Elektroniese Regsblad ... The quality of the goods or services that government procures is obviously a ... tender adjudication as prescribed by public procurement regulation since the ...

  18. Effects of natural plant tenderizers on proteolysis and texture of dry ...

    African Journals Online (AJOL)

    , and overall acceptability. From these results, it is shown that those enzymes as a raw plant juices could be used as tenderizers in dry sausage production. Keywords: Dry sausages, wild boar meat, plant enzymes, proteolysis, texture, sensory ...

  19. Process Evaluation of a Toolbox-training Program for Construction Foremen in Denmark

    DEFF Research Database (Denmark)

    Jeschke, Katharina Christiane; Kines, Pete; Rasmussen, Liselotte

    2017-01-01

    for the majority of the foremen, who experienced positive changes in their daily work methods and interactions with their crews, colleagues, leaders, customers and other construction professions. The program is a unique contribution to leadership training in the construction industry, and can potentially......Daily dialogue between leaders and workers on traditional construction sites is primarily focused on production, quality and time issues, and rarely involves occupational safety and health (OSH) issues. A leadership training program entitled 'Toolbox-training' was developed to improve construction...

  20. Processes in construction of failure management expert systems from device design information

    Science.gov (United States)

    Malin, Jane T.; Lance, Nick

    1987-01-01

    This paper analyzes the tasks and problem solving methods used by an engineer in constructing a failure management expert system from design information about the device to te diagnosed. An expert test engineer developed a trouble-shooting expert system based on device design information and experience with similar devices, rather than on specific expert knowledge gained from operating the device or troubleshooting its failures. The construction of the expert system was intensively observed and analyzed. This paper characterizes the knowledge, tasks, methods, and design decisions involved in constructing this type of expert system, and makes recommendations concerning tools for aiding and automating construction of such systems.

  1. Effect of influent aeration on removal of organic matter from coffee processing wastewater in constructed wetlands.

    Science.gov (United States)

    Rossmann, Maike; Matos, Antonio Teixeira; Abreu, Edgar Carneiro; Silva, Fabyano Fonseca; Borges, Alisson Carraro

    2013-10-15

    The aim of the present study was to evaluate the influence of aeration and vegetation on the removal of organic matter in coffee processing wastewater (CPW) treated in 4 constructed wetlands (CWs), characterized as follows: (i) ryegrass (Lolium multiflorum) cultivated system operating with an aerated influent; (ii) non-cultivated system operating with an aerated influent, (iii) ryegrass cultivated system operating with a non-aerated influent; and (iv) non-cultivated system operating with a non-aerated influent. The lowest average chemical oxygen demand (COD), biochemical oxygen demand (BOD) and total suspended solids (TSS) removal efficiencies of 87, 84 and 73%, respectively, were obtained in the ryegrass cultivated system operating with a non-aerated influent. However, ryegrass cultivation did not influence the removal efficiency of organic matter. Artificial aeration of the CPW, prior to its injection in the CW, did not improve the removal efficiencies of organic matter. On other hand it did contribute to increase the instantaneous rate at which the maximum COD removal efficiency was reached. Although aeration did not result in greater organic matter removal efficiencies, it is important to consider the benefits of aeration on the removal of the other compounds. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Specification, construction, and exact reduction of state transition system models of biochemical processes.

    Science.gov (United States)

    Bugenhagen, Scott M; Beard, Daniel A

    2012-10-21

    Biochemical reaction systems may be viewed as discrete event processes characterized by a number of states and state transitions. These systems may be modeled as state transition systems with transitions representing individual reaction events. Since they often involve a large number of interactions, it can be difficult to construct such a model for a system, and since the resulting state-level model can involve a huge number of states, model analysis can be difficult or impossible. Here, we describe methods for the high-level specification of a system using hypergraphs, for the automated generation of a state-level model from a high-level model, and for the exact reduction of a state-level model using information from the high-level model. Exact reduction is achieved through the automated application to the high-level model of the symmetry reduction technique and reduction by decomposition by independent subsystems, allowing potentially significant reductions without the need to generate a full model. The application of the method to biochemical reaction systems is illustrated by models describing a hypothetical ion-channel at several levels of complexity. The method allows for the reduction of the otherwise intractable example models to a manageable size.

  3. Construction and maintenance of the Ganges-Brahmaputra-Meghna delta: linking process, morphology, and stratigraphy.

    Science.gov (United States)

    Wilson, Carol A; Goodbred, Steven L

    2015-01-01

    We present a review of the processes, morphology, and stratigraphy of the Ganges-Brahmaputra-Meghna delta (GBMD), including insights gained from detailed elevation data. The review shows that the GBMD is best characterized as a composite system, with different regions having morphologic and stratigraphic attributes of an upland fluvial fan delta; a lowland, backwater-reach delta; a downdrift tidal delta plain; and an offshore subaqueous-delta clinoform. These distinct areas of upland and lowland fluvial reaches and tidal dominance vary in time and space, and we distinguish late-Holocene phases of delta construction, maintenance, and decline similar to delta-lobe cycling in other systems. The overall stability of the GBMD landform, relative to many deltas, reflects the efficient, widespread dispersal of sediment by the large monsoon discharge and high-energy tides that affect this region. However, we do identify portions of the delta that are in decline and losing elevation relative to sea level owing to insufficient sediment delivery. These areas, some of which are well inland of the coast, represent those most at risk to the continued effect of sea-level rise.

  4. CONSTRUCTION OF SOCIAL CONTROL IN THE MUNICIPALITY OF FAIR SANTANA - BAHIA: THE DECENTRALIZATION PROCESS

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Lima Falcão do Vale

    2014-05-01

    Full Text Available The recognition of Brazil as a citizen tends to open spaces for democratic construction, so that with this organizing principle of society shall participate effectively in state actions. Thus, the goal of research is to understand the process of implementation of local health councils in the county. The study is exploratory and descriptive, using secondary data collected through document analysis. The period of data collection began in September 2012 until January 2013. The bill (PL that provides for the establishment of Local Health Councils (CLS was approved in 1999, but the following year the city suffers a setback in social control when, after new municipal management, the same PL was repealed. The apex of the discussions was the Municipal Health Conference VI moment it strengthens the idea of embedding the CLS in the municipality. In 2006 it is proposed to draw up a supplementary standard to ensure the inclusion of this event in the municipal health plan. Procedurally, the next actions are updates of directors and expansion of CLS. We consider the technical and political empowerment of the counselors are essential to respond to the needs of the community.

  5. Balance of constructive and destructive carbonate processes on mesophotic coral reefs

    Science.gov (United States)

    Weinstein, D. K.; Klaus, J. S.; Smith, T. B.; Helmle, K. P.; Marshall, D.

    2013-12-01

    Net carbonate accumulation of coral reefs is the product of both constructive and destructive processes that can ultimately influence overall reef geomorphology. Differences in these processes with depth may in part explain why the coral growth-light intensity association does no result in the traditionally theorized reef accretion decrease with depth. Until recently, physical sampling limitations had prevented the acquisition of sedimentary data needed to assess in situ carbonate accumulation in mesophotic reefs (30-150 m). Coral framework production, secondary carbonate production (calcareous encrusters), and bioerosion, the three most critical components of net carbonate accumulation, were analyzed in mesophotic reefs more than 10 km south of St. Thomas, U.S. Virgin Islands along a very gradual slope that limits sediment transport and sedimentation. Recently dead samples of the massive coral, Orbicella annularis collected from three structurally different upper mesophotic coral reef habitats (30-45 m) were cut parallel to the primary growth axis to identify density banding through standard x-radiographic techniques. Assuming annual banding, mesophotic linear extension rates were calculated on the order of 0.7-1.5 mm/yr. Weight change of experimental coral substrates exposed for 3 years indicate differing rates (1.1-17.2 g/yr) of bioerosion and secondary accretion between mesophotic sites. When correcting bioerosion rates for high mesophotic skeletal density, carbonate accumulation rates were found to vary significantly between neighboring mesophotic reefs with distinctive structures. Results imply variable rates of mesophotic reef net carbonate accretion with the potential to influence overall reef/platform morphology, including localized mesophotic reef structure.

  6. Determinants of Ownership Concentration and Tender Offer Law in the Chilean Stock Market

    OpenAIRE

    Morales, Marco

    2009-01-01

    This paper analyzes econometrically the determinants of ownership concentration in the Chilean stock market, with particular attention to the e¤ects of the Tender Offer Law (OPA law). Even though the central pourpose of OPAs Law is achieved, the tender offer mechanism increases the ownership concentration. The main reason for this effect has to do with the "residual OPA" obligation considered by the law.

  7. Improving Tenderness of Spent Layer Hens Meat Using Papaya Leaves (Carica papaya

    Directory of Open Access Journals (Sweden)

    H. O. Abdalla, N. N. A. Ali, F. S. Siddig and S. A. M. Ali*

    2013-01-01

    Full Text Available Two experiments were performed to study the use of papaya leaves as a meat tenderizer. The first experiment was to evaluate the effect of papaya dry leaves added to hen’s diet before slaughter. Spent hens (n=48 were used, half of them were fed a concentrate ration containing10% dried papaya leaves powder (DPLP while others received layer ration (Control, for 10 days. The second experiment involved a comparison between papaya leaves juice (PLJ, fresh papaya leaves (FPL and vinegar solution (VS as marinades applied to meat for one or two hours before cooking. Spent layer hens (n=42 were used for tenderness evaluation method. After slaughtering and preparing the chickens two methods of cooking were used (oven and moist cooking. The cooked parts (breast, thigh and drumstick were subjected to a panel test evaluation according to a designed questionnaire. Addition of dried papaya leaves powder to spent layer hens ration significantly (P≤0.05 increased the level of meat tenderness. Moist cooking had significantly (P≤0.05 improved meat tenderization compared to oven cooking. Meat treated with fresh papaya leaves had significantly (P≤0.05 improved tenderness. It was concluded that wrapping the tough meat of spent layer hens with fresh papaya leaves for one hour and moist cooking improve tenderness of meat.

  8. Cement: Administrative tender specifications and standards in Spain

    Directory of Open Access Journals (Sweden)

    Soria Santamaría, Francisco

    1991-03-01

    Full Text Available The paper describes, in chronological order, the different competent Authorities in Spain and the documents issued by them regarding Cement Regulations and Standards. The origin of the early cement quality Rules is referred to, the issuing of Regulations by the Public Bodies and finally the adoption of National Standards on the one hand, as well as the first initiatives to establish International Standards, especially motivated by the export boom after the Second World War, on the other. The second part of the paper offers a brief synthesis of the terms and conditions for cement in Administrative Tender Specifications from 1919 to date regarding definitions, classifications and specifications. Finally the present state of the art is outlined in a series of Tables describing the cement standards in force in Spain.

    Se empieza exponiendo, en orden cronológico, los organismos españoles y documentos elaborados por los mismos relativos a Reglamentos y Normas sobre cementos. Se justifica el origen de las primeras reglas para establecer la calidad de los cementos, la aparición de reglamentos por parte de las Administraciones públicas y la elaboración de normas a nivel nacional, en primer término, y los inicios de normas internacionales con motivo del auge de las exportaciones acabada la 2ª Guerra Mundial, en segundo lugar. A continuación se hace un breve resumen de la evolución de los Pliegos de Cemento en España desde 1919 hasta nuestros días, en lo que se refiere a Definiciones, Clasificación, Nomenclatura y Especificaciones. Finalmente, se incluye en forma tabulada la situación actual de las normas sobre cementos en España.

  9. The research on the material management system in nuclear power plant construction process

    International Nuclear Information System (INIS)

    Liu Xuegeng; Huang Zhongping

    2010-01-01

    According to the module construction speciality of nuclear power plant, this article analyzes the relationship between the actual amount of the material transported to the construction site and the planed needs of the material, and points out the zero inventory management target in the nuclear power plant construction site. Based on this, the article put forward a nuclear power plant material management system which is based on the 'pull' information driver. This system is composed by material coding sub-system, procurement and site material integrated management sub-system and project control sub-system, and is driven by the material demand from construction site to realize the JIT purchasing. This structure of the system can reduce the gap between the actual amount of the material transported to the site and the planed needs of the material and achieve the target of reducing storage at construction site. (authors)

  10. Preliminary analysis of projected construction employment effects of building the defense waste processing facility at the Savannah River Plant

    International Nuclear Information System (INIS)

    Garey, R.B.; Blair, L.M.; Craig, R.L.; Stevenson, W.

    1981-09-01

    This study estimates the probable effects of constructing the DWPF on the surrounding labor markets. Analyses are based on data from the local and regional labor markets, information from experts on local construction activities, information on the labor requirements of the Vogtle Power Plant (two nuclear reactors) being built by Georgia Power Company in Burke County, Georgia, and an econometric model of the construction labor market, based on several surveys of workers building three Tennessee Valley Authority nuclear power plants. The results of this study are reported in three parts. In Part I, completed in May 1980, we describe the 1979 (base year) employment levels within the local and regional labor markets surrounding SRP, from which most DWPF construction workers are likely to be drawn. In Part II, completed in June 1980, we define the four local sources of construction employment that will compete for craftsmen when DWPF is built. Also in Part II, most of the projected impacts of the DWPF reference immobilization alternative (one of several alternatives that may be chosen) are reported. Several construction schedules and labor demand scenarios for the reference alternative are considered. In Part III, completed in January 1981, most of the estimated impacts of the DWPF alternative referred to as the staged process alternative are reported. Several construction schedules and labor demand scenarios for this alternative are considered

  11. Same but different: Comparative modes of information processing are implicated in the construction of perceptions of autonomy support.

    Science.gov (United States)

    Lee, Rebecca Rachael; Chatzisarantis, Nikos L D

    2017-11-01

    An implicit assumption behind tenets of self-determination theory is that perceptions of autonomy support are a function of absolute modes of information processing. In this study, we examined whether comparative modes of information processing were implicated in the construction of perceptions of autonomy support. In an experimental study, we demonstrated that participants employed comparative modes of information processing in evaluating receipt of small, but not large, amounts of autonomy support. In addition, we found that social comparison processes influenced a number of outcomes that are empirically related to perceived autonomy support such as sense of autonomy, positive affect, perceived usefulness, and effort. Findings shed new light upon the processes underpinning construction of perceptions related to autonomy support and yield new insights into how to increase the predictive validity of models that use autonomy support as a determinant of motivation and psychological well-being. © 2017 The British Psychological Society.

  12. Radioactive Air Emmission Notice of Construction (NOC) for the Waste Receiving and Processing Facility (WRAP)

    Energy Technology Data Exchange (ETDEWEB)

    MENARD, N.M.

    2000-12-01

    This document serves as a notice of construction (NOC) pursuant to the requirements of Washington Administrative Code (WAC) 246-247-060, and as a request for approval to modify pursuant to 40 Code of Federal Regulations (CFR) 61.07 for the Waste Receiving and Processing (WRAP) Facility. The rewrite of this NOC incorporates all the approved revisions (Sections 5.0, 6.0, 8.0, and 9.0), a revised potential to emit (PTE) based on the revised maximally exposed individual (MEI) (Sections 8.0, 10.0, 11.0, 12.0, 13.0, 14.0, and 15.0), the results of a study on fugitive emissions (Sections 6.0, 10.0, and 15.0), and reflects the current operating conditions at the WRAP Facility (Section 5.0). This NOC replaces DOE/RL-93-15 and DOE/RL-93-16 in their entirety. The primary function of the WRAP Facility is to examine, assay, characterize, treat, verify, and repackage radioactive material and mixed waste. There are two sources of emissions from the WRAP Facility: stack emissions and fugitive emissions. The stack emissions have an unabated total effective dose equivalent (TEDE) estimate to the hypothetical offsite MEI of 1.13 E+02 millirem per year. The abated TEDE for the stack emissions is estimated at 5.63 E-02 millirem per year to the MEI. The fugitive emissions have an unabated TEDE estimate to the hypothetical offsite MEI of 5.87 E-04. There is no abatement for the fugitive emissions.

  13. A consonant construction of the hyaloid and retinal vascular systems by the angiogenic process.

    Science.gov (United States)

    Gergely, K; Gerinec, A

    2011-01-01

    There has been much debate as to whether the retinal vasculature forms by angiogenesis or vasculogenesis, thus angiogenesis is now accepted. We suppose that signals necessary for proper localization and development of the hyaloid and retinal vascular systems are already in place prior to the time at which these systems are developed. The remarkable conservation of vascular patterning suggests that specific genetic programs coordinate its formation. Evidence for a genetic program comes particularly from the characterization of gene-targeted mice and mutational analysis in zebrafish, but the exact genetic pathways remain poorly defined. Considering all the things from the aspect of angiogenesis significant differences exist between the mentioned vascular systems only in their lifetime (a) and location (b): (a) The hyaloid vasculature is a complex of transient intraocular vessels, while the retinal vessels are adapted for the whole life. (b) The hyaloid system fills the interior of the optic cup and this way "occupies" three-dimensional space while the distribution of the retinal vessels is relatively planar (two-dimensional) in the retina. We assume that retinal vessels are "built" in the same manner as the hyaloid vasculature and the outcomes at the embryological, histological, cellular and molecular levels confirm it. We show a consonant construction of both systems. The human organism does not have any rational reason to build up one system (i.e. the hyaloid vasculature) by angiogenesis and practically the same system (i.e. the retinal vessels) by another, de novo process, in the eye. It would be a waste of energy and various essential molecules. Thus, it seems that the retinal vascular system is an advanced copy of the hyaloid vessels (Tab. 1, Ref. 143).

  14. Radioactive Air Emmission Notice of Construction (NOC) Application for the Waste Receiving and Processing Facility (WRAP)

    International Nuclear Information System (INIS)

    MENARD, N.M.

    2000-01-01

    This document serves as a notice of construction (NOC) pursuant to the requirements of Washington Administrative Code (WAC) 246-247-060, and as a request for approval to modify pursuant to 40 Code of Federal Regulations (CFR) 61.07 for the Waste Receiving and Processing (WRAP) Facility. The rewrite of this NOC incorporates all the approved revisions (Sections 5.0, 6.0, 8.0, and 9.0), a revised potential to emit (PTE) based on the revised maximally exposed individual (MEI) (Sections 8.0, 10.0, 11.0, 12.0, 13.0, 14.0, and 15.0), the results of a study on fugitive emissions (Sections 6.0, 10.0, and 15.0), and reflects the current operating conditions at the WRAP Facility (Section 5.0). This NOC replaces DOE/RL-93-15 and DOE/RL-93-16 in their entirety. The primary function of the WRAP Facility is to examine, assay, characterize, treat, verify, and repackage radioactive material and mixed waste. There are two sources of emissions from the WRAP Facility: stack emissions and fugitive emissions. The stack emissions have an unabated total effective dose equivalent (TEDE) estimate to the hypothetical offsite MEI of 1.13 E+02 millirem per year. The abated TEDE for the stack emissions is estimated at 5.63 E-02 millirem per year to the MEI. The fugitive emissions have an unabated TEDE estimate to the hypothetical offsite MEI of 5.87 E-04. There is no abatement for the fugitive emissions

  15. The use of the mass customization process in companies from the construction sector

    Directory of Open Access Journals (Sweden)

    Diego de Castro Fettermann

    2014-11-01

    Full Text Available Mass Customization (MC is often used to improve customer service and to reduce operational costs in manufacturing companies, and it can also be applied in low-scale contexts, such as construction. This paper aims to assess how construction companies are implementing MC. We compared a framework of MC found in the literature with three case studies and several improvement opportunities were highlighted. As a result, we could conclude that the MC is being poorly used in the construction business and companies can benefit by increasing the implementation of MC tools and techniques

  16. Basic Study of Establishment of Quality Assurance Processes to Develop an Integrated Quality Assurance System for Nuclear Power Plant Construction

    International Nuclear Information System (INIS)

    Lim, Byungki; Moon, Byeongsuk; Lee, Jae Kyoung

    2014-01-01

    An integrated quality assurance system has necessitated carrying out quality assurance programs in a systematic manner because the opportunities to expand business in overseas markets have increased since the export of a nuclear power plant to UAE in 2009. In this study, we use PDCA method to systematically analyze the quality assurance procedures that were used in previous projects for constructing nuclear power plants. We reached a classification system of quality assurance processes at each phase of nuclear power plant construction by integrating similar work related to quality such as planning, design, equipment manufacturing, construction and start-up. We also established a hierarchy of quality assurance processes to develop an integrated quality assurance system as a technology goal to be developed later. To obtain most updated quality assurance activities, a quality assurance process is structured by integrating similar works analyzed from quality assurance procedures through PDCA cycle method. At the implementation phase of Hierarchy of quality processes and sequence of processes for constructing nuclear power plant are established in this study. Integrated quality assurance system is to be developed by connecting organizations as well as stakeholders such as owners, Architect engineering, suppliers, contractors, and sub-contractors to carry out assigned work efficiently

  17. Basic Study of Establishment of Quality Assurance Processes to Develop an Integrated Quality Assurance System for Nuclear Power Plant Construction

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Byungki; Moon, Byeongsuk; Lee, Jae Kyoung [Korea Hydro and Nuclear Power Co. Ltd., Daejeon (Korea, Republic of)

    2014-05-15

    An integrated quality assurance system has necessitated carrying out quality assurance programs in a systematic manner because the opportunities to expand business in overseas markets have increased since the export of a nuclear power plant to UAE in 2009. In this study, we use PDCA method to systematically analyze the quality assurance procedures that were used in previous projects for constructing nuclear power plants. We reached a classification system of quality assurance processes at each phase of nuclear power plant construction by integrating similar work related to quality such as planning, design, equipment manufacturing, construction and start-up. We also established a hierarchy of quality assurance processes to develop an integrated quality assurance system as a technology goal to be developed later. To obtain most updated quality assurance activities, a quality assurance process is structured by integrating similar works analyzed from quality assurance procedures through PDCA cycle method. At the implementation phase of Hierarchy of quality processes and sequence of processes for constructing nuclear power plant are established in this study. Integrated quality assurance system is to be developed by connecting organizations as well as stakeholders such as owners, Architect engineering, suppliers, contractors, and sub-contractors to carry out assigned work efficiently.

  18. Citizen Action Can Help the Code Adoption Process for Radon-Resistant New Construction: Decatur, Alabama

    Science.gov (United States)

    Adopting a code requiring radon-resistant new construction (RRNC) in Decatur, Alabama, took months of effort by four people. Their actions demonstrate the influence that passionate residents can have on reversing a city council’s direction.

  19. Relationship between nongenital tender point tenderness and intravaginal muscle pain intensity: ratings in women with provoked vestibulodynia and implications for treatment.

    Science.gov (United States)

    Phillips, Nancy; Brown, Candace; Bachmann, Gloria; Wan, Jim; Wood, Ronald; Ulrich, Dagny; Bachour, Candi; Foster, David

    2016-12-01

    Vulvodynia is a chronic vulvar pain disorder and fibromyalgia is a chronic widespread musculoskeletal pain disorder, both of unknown etiology. Association of these conditions is well documented. Intravaginal algometer measurement of tenderness to pressure applied to the pelvic floor muscles helps define vulvodynia associated with musculoskeletal factors. Women with both vulvodynia and fibromyalgia might have increased pelvic muscle pain compared to women with vulvodynia alone, defining the possible link of these 2 conditions. We sought to: (1) correlate pain intensity during the nongenital tender point tenderness examination to pain intensity with the vaginal algometer in women with provoked vestibulodynia, and (2) determine whether subjects with provoked vestibulodynia and fibromyalgia had higher pain intensity scores with the vaginal algometer than those without fibromyalgia. In all, 92 subjects referred for vulvar pain were confirmed to have provoked vestibulodynia using the cotton swab test. A diagnosis of fibromyalgia was made if pain was present (numeric rating scale >1) in at least 11 sites of the 18-point nongenital tender point tenderness exam. Vaginal pain sensitivity was measured using an intravaginal pressure algometer, where 0.1, 0.3, and 0.5 kg/cm 2 forces were applied digitally in random assignment by force and location to the right and left iliococcygeus muscle regions and the posterior vaginal wall. Both tender point tenderness and algometer pain intensity were reported on a 0 (no pain) to 10 (worse pain) numeric rating scale. Correlations were computed between the composite pain intensity (total of rating scale from each pressure threshold at specified site) of nongenital and those of iliococcygeus regions and the posterior vaginal wall. Independent t tests were used to determine differences in iliococcygeus regions and the posterior vaginal algometer pain ratings and presence or absence of fibromyalgia. The significance level was at P pain

  20. Relationship between non-genital tender point tenderness and intra-vaginal muscle pain intensity: Ratings in women with provoked vestibulodynia and implications for treatment

    Science.gov (United States)

    PHILLIPS, Nancy; BROWN, Candace; BACHMANN, Gloria; WAN, Jim; WOOD, Ronald; ULRICH, Dagny; BACHOUR, Candi; FOSTER, David

    2016-01-01

    Background Vulvodynia is a chronic vulvar pain disorder and fibromyalgia is a chronic widespread musculoskeletal pain disorder; both of unknown etiology. Association of these conditions is well documented. Intra-vaginal algometer measurement of tenderness to pressure applied to the pelvic floor muscles helps to define vulvodynia associated with musculoskeletal factors. Women with both vulvodynia and fibromyalgia might have increased pelvic muscle pain compared to women with vulvodynia alone, defining the possible link of these two conditions. Objective 1) correlate pain intensity during the non-genital tender point tenderness examination to pain intensity with the vaginal algometer in women with provoked vestibulodynia, 2) determine whether subjects with provoked vestibulodynia and fibromyalgia had higher pain intensity scores with the vaginal algometer than those without fibromyalgia. Study Design Ninety-two subjects referred for vulvar pain were confirmed to have provoked vestibulodynia using the cotton swab test. A diagnosis of fibromyalgia was made if pain was present (Numerical rating scale> 1) in at least 11 sites of the 18-point non-genital tender point tenderness exam. Vaginal pain sensitivity was measured using an intra-vaginal pressure algometer, where 0.1, 0.3, and 0.5 kg/cm2 forces were applied digitally in random assignment by force and location to the right and left iliococcygeus muscle regions and the posterior vaginal wall. Both tender point tenderness and algometer pain intensity were reported on a 0 (no pain) to 10 (worse pain) numeric rating scale. Correlations were computed between the composite pain intensity (total of rating scale from each pressure threshold at specified site) of non-genital and those of iliococcygeus regions and the posterior vaginal wall. Independent t-tests were used to determine differences in iliococcygeus regions and the posterior vaginal algometer pain ratings and presence or absence of fibromyalgia. The significance

  1. Exploring the Applications of Bio-Eco Architecture for Sustainable Design and Construction process

    OpenAIRE

    M. M. Naguib; M. A. M. Hanafi

    2013-01-01

    It has been commonly noted that the main perception of nature influenced forms isbasically aesthetic while little concern is given to the importance of inspiring from naturein the construction and structural performance of buildings as well as in the naturalecological architectural solutions, thus, this paper will focus on bio-inspired architectureapproach which embraces the eco-friendly practices of sustainable construction, the useof natural materials and the energy conservation by mimickin...

  2. Using tailings and waste products of mining and processing plants for the construction of highways

    Directory of Open Access Journals (Sweden)

    M. L. Khazin

    2017-12-01

    Full Text Available The Republic of Sakha (Yakutia is one of the richest regions of Russia. However, the hardness of the climate in this region amends its full development. The Republic of Sakha (Yakutia has a poorly developed network of highways and railroads. The active development of the fields of the region has been in progress since the middle of last century. However, more than 16 thousand potential deposits remain understudied. Thus, it is necessary to build highways with due regard for modern techniques and technologies of construction for the development of industry as well as socio-economic spheres in this region. This article deals with the issues of potential use of tailings of the diamond mining industry for the construction of highways. Moreover, the amounts of dumps available would be enough to construct more than 20 thousand km of double-track highways, for the industrial and civil purposes. The advantage of the use of the refuse heaps is their proximity to the potential route. First of all, it is necessary to build a transport road, which would connect the Trans-Siberian railway with the Northern sea route. Construction technology should be adapted to the climatic characteristics of the region, therefore providing a uniform resource usage all year round. For the accelerated construction of subgrade, the two lines of railway should be placed on the same roadbed. After the construction of the subgrade of the entire section one of the ways could be dismantled and the movement of vehicles could be organized in its stead, after the preparation of the pavement. This will result in the construction of the roads with combined traffic for road transport as well as railroad transport. The construction of highways in this region must be associated with the transport strategy of Russia until 2030 and 2050.

  3. Nonarticular tenderness and functional status in patients with diffuse idiopathic skeletal hyperostosis.

    Science.gov (United States)

    Mader, Reuven; Novofastovski, Irina; Rosner, Ehud; Adawi, Muhammad; Herer, Paula; Buskila, Dan

    2010-09-01

    To investigate the degree of nonarticular tenderness and functional status in patients with diffuse idiopathic skeletal hyperostosis (DISH). We assessed these variables' correlation with their clinical, radiographic, and constitutional measurements and with metabolic syndrome (MS). Eighty-seven patients with DISH were compared with 65 controls without DISH. Examination of nonarticular tenderness was performed by thumb palpation. Tenderness was scored for the 18 fibromyalgia tender points (TP), and 4 control points. Nonarticular tenderness was expressed by the number of TP and by the total tenderness score (TTS). The Short Health Assessment Questionnaire (HAQ II) was administered to all participants. Clinical and laboratory data were collected from all patients. Patients were classified as having MS by both the National Cholesterol Education Program and World Health Organization definitions. There was a statistically significant difference in TTS between controls and patients with DISH. The mean tenderness of many individual TP was significantly higher in the DISH group compared with the control group. TP counts, TTS, and body mass index (BMI) positively correlated with the HAQ II. There was a linear trend in intensity of T-spine bony bridges (BB) and the total number of TP as well as many individual TP. Patients with DISH were more likely to be affected by MS. No correlation was found between TP count, TTS, and MS. Patients with DISH have a lower pain threshold than patients who do not have DISH. TP count and TTS correlate with the functional status, BMI, waist circumference, and high-grade BB. No correlation was observed between pain threshold and MS.

  4. Tender point count, pain, and mobility in the older population: the mobilize Boston study.

    Science.gov (United States)

    Eggermont, Laura H P; Shmerling, Robert H; Leveille, Suzanne G

    2010-01-01

    Prevalence of tender points (TP), and widespread pain and fibromyalgia, as well as the relationship between TP and widespread pain and mobility, was examined in 585 community-dwelling older adults (mean age 78.2 years, 63.4% female). Pain was based on location (none, single site, multisite, widespread). Mobility was measured by the Short Physical Performance Battery (SPPB), gait speed, and self-reported (S-R) mobility difficulty. Tender-point count and health characteristics (ie, BMI, chronic conditions, analgesic use, number of medications, depression, and blocks walked per week) were assessed. Several participants had 3 or more TP (22.1%) although prevalence of criteria-based fibromyalgia was low (.3%). Mobility was more limited in persons with higher tender-point counts. After adjustment for pain and other risk factors, higher tender-point count was associated with poorer SPPB performance (score < 10, aOR = 1.09 per TP, 95%CI, 1.01-1.17), and slow gait speed (< .784m/sec, aOR = 1.14 per TP, 95%CI, 1.05-1.24), but not with S-R mobility difficulty. S-R mobility difficulty was associated with more disseminated pain (multisite pain, aOR = 2.01, 95%CI, 1.21-3.34; widespread pain, aOR = 2.47, 95%CI, 1.09-5.62). These findings portray a significant mobility burden related to tender-point count and multisite and widespread pain in the older population. Future studies using longitudinal methods are warranted. Higher tender-point count, multisite pain, and widespread pain are common in community-dwelling older adults and associated with mobility problems. Both the manual tender-point exam and the McGill Pain Map may provide important yet different information about risks for mobility disability in older individuals. Copyright 2010 American Pain Society. All rights reserved.

  5. Obtention process of phosphorus 32 starting from commercial sulfur and design and construction of the radiochemical separation prototype

    International Nuclear Information System (INIS)

    Duarte A, C.; Alanis M, J.; Gutierrez R, C.

    2002-01-01

    In this work an obtention process of phosphorus 32 ( 32 P) in orthophosphoric acid form (H 3 32 PO 4 ) is described starting from commercial sulfur. Also the design and construction of the experimental prototype used in the radiochemical separation and their results in three tests carried out is reported. (Author)

  6. The Cognitive, Social and Emotional Processes of Teacher Identity Construction in a Pre-Service Teacher Education Programme

    Science.gov (United States)

    Yuan, Rui; Lee, Icy

    2015-01-01

    This research investigates how three Government-funded Normal Students constructed and reconstructed their identities in a pre-service teacher education programme in China. Drawing upon data from interviews, field observation and the pre-service teachers' written reflections, the study explores the cognitive, social and emotional processes of…

  7. Multicomponent domino processes based on the organocatalytic generation of conjugated acetylides: efficient synthetic manifolds for diversity-oriented molecular construction.

    Science.gov (United States)

    Tejedor, David; González-Cruz, David; Santos-Expósito, Alicia; Marrero-Tellado, Jose Juan; de Armas, Pedro; García-Tellado, Fernando

    2005-06-06

    The organocatalytic generation of a strong base by the action of a good nucleophile is the base for the in situ catalytic generation of conjugated acetylides in the presence of aldehydes or activated ketones. The method is affordable in a multicomponent, domino format able to generate a chemically diverse set of multifunctionalized adducts that are very well suited for diversity-oriented molecular construction. The domino process involves a nucleophile as catalyst and a terminal conjugated alkyne (H-C[triple chemical bond]C-Z) and an aldehyde or activated ketone as building blocks. The chemical outcome of this process changes dramatically as a function of the nucleophile (tertiary amine or phosphine), temperature, stoichiometry, and solvent. These multicomponent domino processes achieve molecular construction with good atom economy and, very importantly, with an exquisite chemo-differentiating incorporation of identical starting units into the products (nondegenerated chemical output). These properties convert the H-C[triple chemical bond]C-Z unit into a specific building block for diversity-oriented molecular construction. Applications to the modular and diversity-oriented synthesis of relevant heterocycles are discussed. A protocol involving two coupled domino processes linked in a one-pot manner will be discussed as an efficient synthetic manifold for the modular and diversity-oriented construction of multisubstituted nitrogen-containing heterocycles.

  8. Agricultural Construction Volume II. Oxy-Gas and Other Cutting/Welding Processes. Woodworking, Metals, Finishing. Instructor's Guide.

    Science.gov (United States)

    Admire, Myron; Maricle, Gary

    This guide contains instructor's materials for teaching a secondary agricultural construction course consisting of instructional units on oxy-gas and other cutting and welding processes (10 lessons), woodworking (6 lessons), metals (10 lessons), and finishing (4 lessons). The materials for each unit include student objectives, a list of…

  9. Effects of plant species on soil microbial processes and CH4 emission from constructed wetlands

    International Nuclear Information System (INIS)

    Wang, Yanhua; Yang, Hao; Ye, Chun; Chen, Xia; Xie, Biao; Huang, Changchun; Zhang, Jixiang; Xu, Meina

    2013-01-01

    Methane (CH 4 ) emission from constructed wetland has raised environmental concern. This study evaluated the influence of mono and polyculture constructed wetland and seasonal variation on CH 4 fluxes. Methane emission data showed large temporal variation ranging from 0 to 249.29 mg CH 4 m −2 h −1 . Results indicated that the highest CH 4 flux was obtained in the polyculture system, planted with Phragmites australis, Zizania latifolia and Typha latifolia, reflecting polyculture system could stimulate CH 4 emission. FISH analysis showed the higher amount of methanotrophs in the profile of Z. latifolia in both mono and polyculture systems. The highest methanogens amount and relatively lower methanotrophs amount in the profile of polyculture system were obtained. The results support the characteristics of CH 4 fluxes. The polyculture constructed wetland has the higher potential of global warming. -- Highlights: ► The polyculture constructed wetland has the higher contribution to CH 4 emission. ► The CH 4 –C conversion ranged from 0 to 3.7%. ► The Z. latifolia played important roles in methanotrophs growth and CH 4 consumption. ► Major influence of T-N, TOC and plant cover on CH 4 emission was obtained. -- The polyculture constructed wetland has the higher contribution to global warming

  10. The Role Of Transparency In Tenders In Order To Maintain The Public Interest And The Rights Of Suppliers

    Directory of Open Access Journals (Sweden)

    Reza Tajarlou

    2017-09-01

    Full Text Available The public tenders are very important instrument which the public sector uses to the allocation of great part of public expenditure for Welfare of citizens. Due to the the lack of resources and the optimal use of it in line with the public interest and the rights of tenderers tenders play a key role in the public sector operations they can be defined as an instrument to increase the effectiveness of the public sector as a whole. But with the conflict of interests of the public and private sector there needs to be transparency so that the rights of the parties to maintain and public confidence in the state increase. Transparency in Tenders cause the Suppliers that win the bids are those with the best product at the best price targeted at achieving the best outcome. This paper examines the concept and types of tenders for the effects of transparency in government tenders.

  11. Ecological studies related to the construction of the Defense Waste Processing Facility on the Savannah River Site

    International Nuclear Information System (INIS)

    Scott, D.E.; Chazel, A.C.; Pechmann, J.H.K.; Estes, R.A.

    1993-06-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980's. The Savannah River Ecology Laboratory (SREL) has completed 14 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites? (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site? (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams? (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of ''refuge ponds'' as alternative breeding sites for amphibians that formerly bred at Sun Bay? Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10 CFR 1022)

  12. Asymptotic Method of Solution for a Problem of Construction of Optimal Gas-Lift Process Modes

    Directory of Open Access Journals (Sweden)

    Fikrat A. Aliev

    2010-01-01

    Full Text Available Mathematical model in oil extraction by gas-lift method for the case when the reciprocal value of well's depth represents a small parameter is considered. Problem of optimal mode construction (i.e., construction of optimal program trajectories and controls is reduced to the linear-quadratic optimal control problem with a small parameter. Analytic formulae for determining the solutions at the first-order approximation with respect to the small parameter are obtained. Comparison of the obtained results with known ones on a specific example is provided, which makes it, in particular, possible to use obtained results in realizations of oil extraction problems by gas-lift method.

  13. Constructive and Unproductive Processing of Traumatic Experiences in Trauma-Focused Cognitive-Behavioral Therapy for Youth.

    Science.gov (United States)

    Hayes, Adele M; Yasinski, Carly; Grasso, Damion; Ready, C Beth; Alpert, Elizabeth; McCauley, Thomas; Webb, Charles; Deblinger, Esther

    2017-03-01

    Although there is substantial evidence to support the efficacy of cognitive-behavioral treatments (CBT) for posttraumatic stress disorder (PTSD), there is some debate about how these treatments have their effects. Modern learning theory and cognitive and emotional processing theories highlight the importance of reducing avoidance, facilitating the constructive processing of feared experiences, and strengthening new inhibitory learning. We examined variables thought to be associated with unproductive and constructive processing of traumatic experiences in a sample of 81 youth with elevated PTSD symptoms, who received Trauma-Focused Cognitive Behavioral Therapy (TF-CBT) for abuse or traumatic interpersonal loss. Sessions during the trauma narrative phase of TF-CBT were coded for indicators of unproductive processing (overgeneralization, rumination, avoidance) and constructive processing (decentering, accommodation of corrective information), as well as levels of negative emotion. In previous analyses of this trial (Ready et al., 2015), more overgeneralization during the narrative phase predicted less improvement in internalizing symptoms at posttreatment and a worsening of externalizing symptoms over the 12-month follow-up. In contrast, more accommodation predicted improvement in internalizing symptoms and also moderated the negative effects of overgeneralization on internalizing and externalizing symptoms. The current study examined correlates of overgeneralization and accommodation. Overgeneralization was associated with more rumination, less decentering, and more negative emotion, suggesting immersion in trauma-related material. Accommodation was associated with less avoidance and more decentering, suggesting a healthy distance from trauma-related material that might allow for processing and cognitive change. Decentering also predicted improvement in externalizing symptoms at posttreatment. Rumination and avoidance showed important associations with

  14. Constructive and Unproductive Processing of Traumatic Experiences in Trauma-Focused Cognitive-Behavioral Therapy for Youth

    Science.gov (United States)

    Hayes, Adele M.; Yasinski, Carly; Grasso, Damion; Ready, C. Beth; Alpert, Elizabeth; McCauley, Thomas; Webb, Charles; Deblinger, Esther

    2016-01-01

    Although there is substantial evidence to support the efficacy of cognitive-behavioral treatments (CBT) for posttraumatic stress disorder (PTSD), there is some debate about how these treatments have their effects. Modern learning theory and cognitive and emotional processing theories highlight the importance of reducing avoidance, facilitating the constructive processing of feared experiences, and strengthening new inhibitory learning. We examined variables thought to be associated with unproductive and constructive processing of traumatic experiences in a sample of 81 youth with elevated PTSD symptoms, who received Trauma-Focused Cognitive Behavioral Therapy (TF-CBT) for abuse or traumatic interpersonal loss. Sessions during the trauma narrative phase of TF-CBT were coded for indicators of unproductive processing (overgeneralization, rumination, avoidance) and constructive processing (decentering, accommodation of corrective information), as well as levels of negative emotion. In previous analyses of this trial (Ready et al., 2015), more overgeneralization during the narrative phase predicted less improvement in internalizing symptoms at posttreatment and a worsening of externalizing symptoms over the 12-month follow-up. In contrast, more accommodation predicted improvement in internalizing symptoms and also moderated the negative effects of overgeneralization on internalizing and externalizing symptoms. The current study examined correlates of overgeneralization and accommodation. Overgeneralization was associated with more rumination, less decentering, and more negative emotion, suggesting immersion in trauma-related material. Accommodation was associated with less avoidance and more decentering, suggesting a healthy distance from trauma-related material that might allow for processing and cognitive change. Decentering also predicted improvement in externalizing symptoms at posttreatment. Rumination and avoidance showed important associations with

  15. TRANSCUTANEOUS ELECTRIC NERVE STIMULATION IN MODULATION OF PAIN OF TENDER POINTS IN SYNDROME FIBROMYALGIA: CASE STUDY

    Directory of Open Access Journals (Sweden)

    Isabel Mara Magalhães Rori

    2008-08-01

    Full Text Available The Fibromyalgia is a syndrome of pain and chronic diffuse, characterized by the presence of at least 11 of 18 points called anatomically specific tender points, painful on palpation. As the pain diffuse the main symptom of fibromyalgia. The current treatment is focused mainly to the reduction of symptoms. Physiotherapy has animportant role in improving the control of pain. This study aimed to verify the effectiveness of the main TENS of low frequency and high intensity in modulating pain of tender points of patients with fibromyalgia. For this was a case study of patient R. S. S., 38-yearold female carrier of the syndrome of fibromyalgia attended school in the clinic of the Faculty of Integrated Ceará (FISIOFIC. The patient was treated with the TENS-pain Acupuncture points in a total of twelve care and pain assessed before starting treatment and after three attendants. There was a significant reduction in pain intensity at 77.7% of the tender points in the second evaluation and 88.8% of the points in the other assessments. It was concluded that there was a reduction in the pain of tender points of the patient showing the analgesia promoted by TENS, so it should be used as a complementary treatment programs associated with other treatments and also served as a good technique to locate the tender points.

  16. Chlorobenzene removal efficiencies and removal processes in a pilot-scale constructed wetland treating contaminated groundwater

    DEFF Research Database (Denmark)

    Braeckevelt, M.; Reiche, N.; Trapp, Stefan

    2011-01-01

    Low-chlorinated benzenes (CBs) are widespread groundwater contaminants and often threaten to contaminate surface waters. Constructed wetlands (CWs) in river floodplains are a promising technology for protecting sensitive surface water bodies from the impact of CBs. The efficiency and seasonal var...

  17. Modeling Signal-Noise Processes Supports Student Construction of a Hierarchical Image of Sample

    Science.gov (United States)

    Lehrer, Richard

    2017-01-01

    Grade 6 (modal age 11) students invented and revised models of the variability generated as each measured the perimeter of a table in their classroom. To construct models, students represented variability as a linear composite of true measure (signal) and multiple sources of random error. Students revised models by developing sampling…

  18. Stretching the Academic Harness: Knowledge Construction in the Process of Academic Mobility in Chile

    Science.gov (United States)

    Munoz-Garcia, Ana Luisa; Chiappa, Roxana

    2017-01-01

    In this article, we analyse the impact of academic mobility on the construction of knowledge for Chilean scholars who have studied abroad. We conducted 41 semi-structured interviews with Chilean-born scholars in the social sciences and humanities, who accepted jobs at national research universities in Chile after receiving their doctorates abroad.…

  19. Constructing the Academic Category of Teacher Educator in Universities' Recruitment Processes in Aotearoa, New Zealand

    Science.gov (United States)

    Gunn, Alexandra C.; Berg, David; Hill, Mary F.; Haigh, Mavis

    2015-01-01

    An examination of recruitment materials and interviews with personnel involved in the employment of teacher educators to positions in university-based New Zealand initial teacher education (ITE) courses reveals three constructions of teacher educator as academic worker: the professional expert, the dually qualified, and the traditional academic.…

  20. FROM TATTOOS, VEILS AND NOTEBOOKS: REPRESENTATIONS OF OTHERNESS AND IDENTITY CONSTRUCTION PROCESSES IN YOUNG STUDENTS WITH MIGRANT BACKGROUNDS IN SPAIN

    Directory of Open Access Journals (Sweden)

    Antonia Olmos Alcaraz

    2017-09-01

    Full Text Available This study relationally analyses the processes of the construction of difference and the processes of identity construction in which young adolescents and pre-adolescents with migrant backgrounds within formal educational contexts are involved. The text aims to show and describe how otherness and identity work in an intersectional way. Our analysis considers intersectionality as the most appropriate way of approximation to the reality observed. To do so, we work from biographical interviews and life stories of young people produced through our own respective fieldwork. This material had been analyzed looking for the relations between identity categories (gender, religion, nationality... and how these categories are interpreted for the young adolescents involved in the research. We research in twelve andalusian high schools with students, teachers and families. Along three scholar years, we made 132 interviews and 13 discussion groups. This allows us to address the theoretical objects of the study (otherness/identity in a contextual and process-based way.

  1. Impact of peculiar features of construction of transport infrastructure on the choice of tools for reengineering of business processes

    Science.gov (United States)

    Khripko, Elena

    2017-10-01

    In the present article we study the issues of organizational resistance to reengineering of business processes in construction of transport infrastructure. Reengineering in a company of transport sector is, first and foremost, an innovative component of business strategy. We analyze the choice of forward and reverse reengineering tools and terms of their application in connection with organizational resistance. Reengineering is defined taking into account four aspects: fundamentality, radicality, abruptness, business process. We describe the stages of reengineering and analyze key requirements to newly created business processes.

  2. Muscle fatigue in relation to forearm pain and tenderness among professional computer users

    DEFF Research Database (Denmark)

    Thomsen, GF; Johnson, PW; Svendsen, Susanne Wulff

    2007-01-01

    ABSTRACT: BACKGROUND: To examine the hypothesis that forearm pain with palpation tenderness in computer users is associated with increased extensor muscle fatigue. METHODS: Eighteen persons with pain and moderate to severe palpation tenderness in the extensor muscle group of the right forearm...... response was not explained by differences in the MVC or body mass index. CONCLUSION: Computer users with forearm pain and moderate to severe palpation tenderness had diminished forearm extensor muscle fatigue response. Additional studies are necessary to determine whether this result reflects an adaptive...... and twenty gender and age matched referents without such complaints were enrolled from the Danish NUDATA study of neck and upper extremity disorders among technical assistants and machine technicians. Fatigue of the right forearm extensor muscles was assessed by muscle twitch forces in response to low...

  3. Proposal to negotiate, without competitive tendering, a blanket contract for an instant-reading dosimeter system

    CERN Document Server

    2003-01-01

    This document concerns the award of a contract, without competitive tendering, for the supply, installation and maintenance of an instant-reading dosimeter system. Following a market survey (MS-3118/TIS) carried out among 28 firms in eleven Member States, a request for a quotation was sent to one firm on 3 October 2003. The Finance Committee is invited to agree to the negotiation of a blanket contract, without competitive tendering, with RADOS TECHNOLOGY (FI) for the supply, installation and maintenance of an instant-reading dosimeter system for a total amount not exceeding 2 100 000 euros (3 252 284 Swiss francs), subject to revision for inflation after 1 January 2007. The rate of exchange used is that stipulated in the tender. The firm has indicated the following distribution by country of the contract value covered by this adjudication proposal: FI - 58%; CH - 38%; GB - 4%.

  4. [The reciprocity rule in the construction of relationships as the key in relational processes].

    Science.gov (United States)

    Fenelli, Antonio; Volpi, Cecilia; Guarracino, Emanuele; Galli, Virginia; Esposito, Massimo

    2011-01-01

    Reciprocity as an expression of the therapist-patient relationship is pointed-out by Mario Reda who refers to Comparetti's studies on the mother-foetus reciprocity, mediated by the so-called "jumps". Reciprocal behaviours are clearly observable during bird and other animal courtship behaviour, whereas in the Sapiens sapiens species, we may observe the establishing of a very complex reciprocity system, which starts with gestures and bodily attitudes, subsequently activating sensory-motor emotional schemata and internal working models, thus enabling the construction of personal meanings. A relationship may result from an encounter provided that "compatible" meanings are constructed in the context of "possible reciprocity" of significant systems. The observation of reciprocity provides a concrete possibility to reduce the risk of absolute subjectivity related to the I or the you, superceding it through the us.

  5. Plant growth and microbial processes in a constructed wetland planted with Phalaris arundinacea

    Czech Academy of Sciences Publication Activity Database

    Edwards, K.R.; Čížková, Hana; Zemanová, K.; Šantrůčková, H.

    2006-01-01

    Roč. 27, č. 2 (2006), s. 153-165 ISSN 0925-8574 R&D Projects: GA ČR(CZ) GA206/02/1036 Institutional research plan: CEZ:AV0Z60870520 Keywords : Constructed wetland * N mineralization * P mineralization * nutrient uptake * Phalaris arundinacea * non-structural carbohydrates * eutrophication Subject RIV: DJ - Water Pollution ; Quality Impact factor: 1.331, year: 2006

  6. Considering PTSD From the Perspective of Brain Processes: A Psychological Construction Approach

    OpenAIRE

    Suvak, Michael K.; Barrett, Lisa Feldman

    2011-01-01

    Posttraumatic stress disorder (PTSD) is a complex psychiatric disorder that involves symptoms from various domains that appear to be produced by the combination of several mechanisms. The authors contend that existing neural accounts fail to provide a viable model that explains the emergence and maintenance of PTSD and the associated heterogeneity in the expression of this disorder (cf. Garfinkel & Liberzon, 2009). They introduce a psychological construction approach as a novel framework to p...

  7. Energy-Performance-Based Design-Build Process: Strategies for Procuring High-Performance Buildings on Typical Construction Budgets: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Scheib, J.; Pless, S.; Torcellini, P.

    2014-08-01

    NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy use requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.

  8. Central Auditory Processing Disorders: Is It a Meaningful Construct or a Twentieth Century Unicorn?

    Science.gov (United States)

    Kamhi, Alan G.; Beasley, Daniel S.

    1985-01-01

    The article demonstrates how professional and theoretical perspectives (including psycholinguistics, behaviorist, and information processing perspectives) significantly influence the manner in which central auditory processing is viewed, assessed, and remediated. (Author/CL)

  9. VA Construction: Improved Processes Needed to Monitor Contract Modifications, Develop Schedules, and Estimate Costs

    Science.gov (United States)

    2017-03-01

    the Handbook.36 VA headquarters officials told us that regional CFM offices monitor change- order - processing time frames for projects in their...visited collected different types of data on change orders. Because VA lacks the data on the change order processing timeframes required by the Handbook...goals of processing change orders in a timelier manner, especially given our previous findings that change- order - processing time frames caused

  10. Genome-Wide H3K4me3 Analysis in Angus Cattle with Divergent Tenderness.

    Directory of Open Access Journals (Sweden)

    Chunping Zhao

    Full Text Available Tenderness is one of the most important properties of meat quality, which is influenced by genetic and environmental factors. As an intensively studied epigenetic marker, histone methylation, occurring on arginine and lysine residues, has pivotal regulatory functions on gene expression. To examine whether histone methylation involves in beef tenderness variation, we analyzed the transcriptome and H3K4me3 enrichment profiles of muscle strips obtained from the longissimus dorsi (LD of Angus steers previously classify to the tender or tough group. We first plotted a global bovine H3K4me3 map on chromosomes and called peak-enriched regions and genes. We found that majorities of H3K4me3 on genes were occupying the first intron and intergenic regions and its maps displayed similar patterns in tender and tough groups, with high H3K4me3 enrichment surrounding the transcription start site (TSS. We also explored the relationship of H3K4me3 and gene expression. The results showed that H3K4me3 enrichment is highly positively correlated with gene expression across the whole genome. Cluster analysis results confirmed the relationship of H3K4me3 enrichment and gene expression. By using a pathway-based approach in genes with H3K4me3 enrichment in promoter regions from the tender cluster, we revealed that those genes involved in the development of different tissues-connective tissue, skeletal and muscular system and functional tissues-; while in tough group those genes engaged in cell death, lipid metabolism and small molecule biochemistry. The results from this study provide a deep insight into understanding of the mechanisms of epigenetic regulations in meat quality and beef tenderness.

  11. MULTI-MARKET INDUSTRIAL ORGANIZATIONAL ECONOMIC MODELS FOR THE INTERNATIONALIZATION PROCESS BY SMALL AND MEDIUM ENTERPRISE CONSTRUCTION DESIGN SERVICE FIRMS

    Directory of Open Access Journals (Sweden)

    Kerry London

    2010-11-01

    Full Text Available Small and medium enterprises (SMEs are critical to strategic initiatives in an economy; however, their contribution to foreign trade is not as significant. SMEs are one of the principal driving forces in economic development. One of the greatest challenges is the internationalization process for longevity rather than seeing the process as initial market entry. The internationalization process research has typically involved four key constructs: market selection, decision to enter, entry modes and factors affecting entry modes. Past research has focused on large manufacturing firms. The export of architectural, engineering and construction (AEC firms has undergone growth, yet there is still significant opportunity for further growth. The majority of AEC firms are SMEs. Notwithstanding assistance provided through international trade missions, organized export firm support networks and information packages by a burgeoning number of government agencies, there are still perceived barriers to market entry and long-term economic sustainability for SMEs. There are a number of problems faced by SMEs acting in foreign trade. This investigation explores the successful initial internationalization process constructs and identifies unique project-oriented sector characteristics. The study identified similarities and differences between two firms that have been exporting to various localities, including Eastern Europe, Africa, Middle East, UK, Asia and South America, for more than two decades. The similarities and differences were identified within eight major constructs: purpose, firm type, market image and design philosophy, entry mode strategy, institutional arrangement, factors affecting mode of entry, market selection and firm strategy in relation to project selection. The primary reasons for internationalization were associated with the firms' motivations related to growth and financial viability. This article discusses the various internationalization

  12. Possibilities concerning the procurement of a tender for a new nuclear power plant

    International Nuclear Information System (INIS)

    Winkler, Thomas; Streit, Marco

    2010-01-01

    The authors describe the legal frame for the licensing of a new nuclear power plant in Switzerland. The possibilities for a company to perform the procurement of a tender are discussed with respect to the decision to assign the project to a single contractor or to a consortium. The requirements to the contractor may be grouped in the categories cost, time schedule, function, volume and quality. Another topic in the discussion covers risks with respect to the tender and the contract and the appropriate solution strategies.

  13. Estimation of erosion-accumulative processes at the Inia River’s mouth near high-rise construction zones.

    Directory of Open Access Journals (Sweden)

    Sineeva Natalya

    2018-01-01

    Full Text Available Our study relevance is due to the increasing man-made impact on water bodies and associated land resources within the urban areas, as a consequence, by a change in the morphology and dynamics of Rivers’ canals. This leads to the need to predict the development of erosion-accumulation processes, especially within the built-up urban areas. Purpose of the study is to develop programs on the assessment of erosion-accumulation processes at a water body, a mouth area of the Inia River, in the of perspective high-rise construction zone of a residential microdistrict, the place, where floodplain-channel complex is intensively expected to develop. Results of the study: Within the velocities of the water flow comparing, full-scale measured conditions, and calculated from the model, a slight discrepancy was recorded. This allows us to say that the numerical model reliably describes the physical processes developing in the River. The carried out calculations to assess the direction and intensity of the channel re-formations, made us possible to conclude, there was an insignificant predominance of erosion processes over the accumulative ones on the undeveloped part of the Inia River (the processes activity is noticeable only in certain areas (by the coasts and the island. Importance of the study: The study on the erosion-accumulation processes evaluation can be used in design decisions for the future high-rise construction of this territory, which will increase their economic efficiency.

  14. Estimation of erosion-accumulative processes at the Inia River's mouth near high-rise construction zones.

    Science.gov (United States)

    Sineeva, Natalya

    2018-03-01

    Our study relevance is due to the increasing man-made impact on water bodies and associated land resources within the urban areas, as a consequence, by a change in the morphology and dynamics of Rivers' canals. This leads to the need to predict the development of erosion-accumulation processes, especially within the built-up urban areas. Purpose of the study is to develop programs on the assessment of erosion-accumulation processes at a water body, a mouth area of the Inia River, in the of perspective high-rise construction zone of a residential microdistrict, the place, where floodplain-channel complex is intensively expected to develop. Results of the study: Within the velocities of the water flow comparing, full-scale measured conditions, and calculated from the model, a slight discrepancy was recorded. This allows us to say that the numerical model reliably describes the physical processes developing in the River. The carried out calculations to assess the direction and intensity of the channel re-formations, made us possible to conclude, there was an insignificant predominance of erosion processes over the accumulative ones on the undeveloped part of the Inia River (the processes activity is noticeable only in certain areas (by the coasts and the island)). Importance of the study: The study on the erosion-accumulation processes evaluation can be used in design decisions for the future high-rise construction of this territory, which will increase their economic efficiency.

  15. Threads: theory of Vygotsky to learning processes and child development in early childhood education mediated by toy construction

    Directory of Open Access Journals (Sweden)

    Fábio Tadeu Reina

    2016-05-01

    Full Text Available This article has the objectivity to point out some of the threads of the cultural historical theory of Vygotsky partner to the process of learning and development of children in early childhood education mediated by the construction of toys and games. In this direction, looking to approach the foundations of this theory in order to internalize the reader in his work in search of reflections and readings on the theme proposed here.

  16. Construction of quality-assured infant feeding process of care data repositories: definition and design (Part 1).

    Science.gov (United States)

    Garcí A-de-León-Chocano, Ricardo; Sáez, Carlos; Muñoz-Soler, Verónica; Garcí A-de-León-González, Ricardo; García-Gómez, Juan M

    2015-12-01

    This is the first paper of a series of two regarding the construction of data quality (DQ) assured repositories for the reuse of information on infant feeding from birth until two years old. This first paper justifies the need for such repositories and describes the design of a process to construct them from Electronic Health Records (EHR). As a result, Part 1 proposes a computational process to obtain quality-assured datasets represented by a canonical structure extracted from raw data from multiple EHR. For this, 13 steps were defined to ensure the harmonization, standardization, completion, de-duplication, and consistency of the dataset content. Moreover, the quality of the input and output data for each of these steps is controlled according to eight DQ dimensions: predictive value, correctness, duplication, consistency, completeness, contextualization, temporal-stability and spatial-stability. The second paper of the series will describe the application of this computational process to construct the first quality-assured repository for the reuse of information on infant feeding in the perinatal period aimed at the monitoring of clinical activities and research. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Design, construction and mechanical optimisation process of electrode with radial current flow in the scala tympani.

    Science.gov (United States)

    Deman, P R; Kaiser, T M; Dirckx, J J; Offeciers, F E; Peeters, S A

    2003-09-30

    A 48 contact cochlear implant electrode has been constructed for electrical stimulation of the auditory nerve. The stimulating contacts of this electrode are organised in two layers: 31 contacts on the upper surface directed towards the habenula perforata and 17 contacts connected together as one longitudinal contact on the underside. The design of the electrode carrier aims to make radial current flow possible in the cochlea. The mechanical structure of the newly designed electrode was optimised to obtain maximal insertion depth. Electrode insertion tests were performed in a transparent acrylic model of the human cochlea.

  18. Improving the making ready process - Exploring the preconditions to work tasks in construction

    DEFF Research Database (Denmark)

    Lindhard, Søren; Wandahl, Søren

    2012-01-01

    preconditions have been revealed. The seven first is basically corresponding to the ones presented by Koskela (1999), while the last two are new and extends the existing knowledge. The preconditions are as follows: 1) Construction design and management. 2) Components and materials are present. 3) Workers...... are present. 4) Equipment and machinery are present. 5) Sufficient space for conduction. 6) Previous activities must be completed. 7) Climate conditions must be in order. 8) Safe working conditions in relation to national “Health and Safety at Work Act ” have to be present, 9) Known working conditions. Often...... productivity....

  19. Optimized piranha etching process for SU8-based MEMS and MOEMS construction

    International Nuclear Information System (INIS)

    Holmes, Matthew; Keeley, Jared; Hurd, Katherine; Hawkins, Aaron; Schmidt, Holger

    2010-01-01

    We demonstrate the optimization of the concentration, temperature and cycling of a piranha (H 2 O 2 :H 2 SO 4 ) mixture that produces high yields while quickly etching hollow structures made using a highly crosslinked SU8 polymer sacrificial core. The effects of the piranha mixture on the thickness, refractive index and roughness of common micro-electromechanical systems and micro-opto-electromechanical systems fabrication materials (SiN, SiO 2 and Si) were determined. The effectiveness of the optimal piranha mixture was demonstrated in the construction of hollow anti-resonant reflecting optical waveguides

  20. Optimized piranha etching process for SU8-based MEMS and MOEMS construction

    Science.gov (United States)

    Holmes, Matthew; Keeley, Jared; Hurd, Katherine; Schmidt, Holger; Hawkins, Aaron

    2010-11-01

    We demonstrate the optimization of the concentration, temperature and cycling of a piranha (H2O2:H2SO4) mixture that produces high yields while quickly etching hollow structures made using a highly crosslinked SU8 polymer sacrificial core. The effects of the piranha mixture on the thickness, refractive index and roughness of common micro-electromechanical systems and micro-opto-electromechanical systems fabrication materials (SiN, SiO2 and Si) were determined. The effectiveness of the optimal piranha mixture was demonstrated in the construction of hollow anti-resonant reflecting optical waveguides.

  1. Effective method for construction of low-dimensional models for heat transfer process

    Energy Technology Data Exchange (ETDEWEB)

    Blinov, D.G.; Prokopov, V.G.; Sherenkovskii, Y.V.; Fialko, N.M.; Yurchuk, V.L. [National Academy of Sciences of Ukraine, Kiev (Ukraine). Inst. of Engineering Thermophysics

    2004-12-01

    A low-dimensional model based on the method of proper orthogonal decomposition (POD) and the method of polyargumental systems (MPS) for thermal conductivity problems with strongly localized source of heat has been presented. The key aspect of these methods is that they enable to avoid weak points of other projection methods, which consists in a priori choice of basis functions. It enables us to use the MPS method and the POD method as convenient means to construct low-dimensional models of heat and mass transfer problems. (Author)

  2. Effect of heterogeneity and anisotropy related to the construction method on transfer processes in waste rock piles.

    Science.gov (United States)

    Lahmira, Belkacem; Lefebvre, René; Aubertin, Michel; Bussière, Bruno

    2016-01-01

    Waste rock piles producing acid mine drainage (AMD) are partially saturated systems involving multiphase (gas and liquid) flow and coupled transfer processes. Their internal structure and heterogeneous properties are inherited from their wide-ranging material grain sizes, their modes of deposition, and the underlying topography. This paper aims at assessing the effect of physical heterogeneity and anisotropy of waste rock piles on the physical processes involved in the generation of AMD. Generic waste rock pile conditions were represented with the numerical simulator TOUGH AMD based on those found at the Doyon mine waste rock pile (Canada). Models included four randomly distributed material types (coarse, intermediate, fine and very fine-grained). The term "randomly" as used in this study means that the vertical profile and spatial distribution of materials in waste rock piles (internal structure) defy stratigraphy principles applicable to natural sediments (superposition and continuity). The materials have different permeability and capillary properties, covering the typical range of materials found in waste rock piles. Anisotropy with a larger horizontal than vertical permeability was used to represent the effect of pile construction by benches, while the construction by end-dumping was presumed to induce a higher vertical than horizontal permeability. Results show that infiltrated precipitation preferentially flows in fine-grained materials, which remain almost saturated, whereas gas flows preferentially through the most permeable coarse materials, which have higher volumetric gas saturation. Anisotropy, which depends on pile construction methods, often controls global gas flow paths. Construction by benches favours lateral air entry close to the pile slope, whereas end-dumping leads to air entry from the surface to the interior of the pile by secondary gas convection cells. These results can be useful to construct and rehabilitate waste rock piles to minimize

  3. Considerations of metal joining processes for space fabrication, construction and repair

    Science.gov (United States)

    Russell, C.; Poorman, R.; Jones, C.; Nunes, A.; Hoffman, D.

    1991-01-01

    A comprehensive evaluation is conducted of candidate processes for metalworking in orbital (vacuum-microgravity) conditions. Attention is given to electron-beam welding, brazing, gas-tungsten arc welding, laser welding, plasma arc welding, and gas-metal arc welding. It is established that several of these processes will be required to cover all foreseeable requirements. Microgravity effects are considered minor, and efforts are being concentrated on problems associated with vacuum conditions and with process-operator safety.

  4. Research on the raw data processing method of the hydropower construction project

    Science.gov (United States)

    Tian, Zhichao

    2018-01-01

    In this paper, based on the characteristics of the fixed data, this paper compares the various mathematical statistics analysis methods and chooses the improved Grabs criterion to analyze the data, and through the analysis of the data processing, the data processing method is not suitable. It is proved that this method can be applied to the processing of fixed raw data. This paper provides a reference for reasonably determining the effective quota analysis data.

  5. The process of the construction of peace in Colombia, beyond negotiation: a proposal starting from a Transformative and Participatory Peace

    Directory of Open Access Journals (Sweden)

    Esteban Ramos Muslera

    2016-07-01

    Full Text Available Analysis is made of the peace process, which is being held in Colombia between the insurgents of the FARC-EP and the Colombian Government, which is noted from the theoretical approaches of the Studies of Peace and from the perspective of the social movement, arguing the need of assuming the epistemological approach of the Transformative and Participatory Peace as a way to favor integral processes for the construction of peace beyond negotiation.

  6. CONSTRUCTIVE MODEL OF ADAPTATION OF DATA STRUCTURES IN RAM. PART II. CONSTRUCTORS OF SCENARIOS AND ADAPTATION PROCESSES

    Directory of Open Access Journals (Sweden)

    V. I. Shynkarenko

    2016-04-01

    Full Text Available Purpose.The second part of the paper completes presentation of constructive and the productive structures (CPS, modeling adaptation of data structures in memory (RAM. The purpose of the second part in the research is to develop a model of process of adaptation data in a RAM functioning in different hardware and software environments and scenarios of data processing. Methodology. The methodology of mathematical and algorithmic constructionism was applied. In this part of the paper, changes were developed the constructors of scenarios and adaptation processes based on a generalized CPS through its transformational conversions. Constructors are interpreted, specialized CPS. Were highlighted the terminal alphabets of the constructor scenarios in the form of data processing algorithms and the constructor of adaptation – in the form of algorithmic components of the adaptation process. The methodology involves the development of substitution rules that determine the output process of the relevant structures. Findings. In the second part of the paper, system is represented by CPS modeling adaptation data placement in the RAM, namely, constructors of scenarios and of adaptation processes. The result of the implementation of constructor of scenarios is a set of data processing operations in the form of text in the language of programming C#, constructor of the adaptation processes – a process of adaptation, and the result the process of adaptation – the adapted binary code of processing data structures. Originality. For the first time proposed the constructive model of data processing – the scenario that takes into account the order and number of calls to the various elements of data structures and adaptation of data structures to the different hardware and software environments. At the same the placement of data in RAM and processing algorithms are adapted. Constructionism application in modeling allows to link data models and algorithms for

  7. The construction of emotional experience requires the integration of implicit and explicit emotional processes.

    Science.gov (United States)

    Quirin, Markus; Lane, Richard D

    2012-06-01

    Although we agree that a constructivist approach to emotional experience makes sense, we propose that implicit (visceromotor and somatomotor) emotional processes are dissociable from explicit (attention and reflection) emotional processes, and that the conscious experience of emotion requires an integration of the two. Assessments of implicit emotion and emotional awareness can be helpful in the neuroscientific investigation of emotion.

  8. The gas turbine - a bundle of energy - requires tender care

    Energy Technology Data Exchange (ETDEWEB)

    Saarinen, J.; Uronen, J.; Leisio, C. [ed.

    1997-11-01

    The ability of a power plant to generate energy economically depends to a great extent on the functioning of the turbine. These days, an increasingly large number of these power plant `motors` are gas turbines. IVO`s expertise in the operation, maintenance and repair of gas turbines is based on long practical experience and the company`s own research. And IVO is also no stranger to the design and construction of new gas turbine plants

  9. Construction contracts law and management

    CERN Document Server

    Hughes, Will; Murdoch, John

    2015-01-01

    The fifth edition of this bestselling textbook has been thoroughly revised to provide the most up-to-date and comprehensive coverage of the legislation, administration and management of construction contracts. It now includes comparisons of working with JCT, NEC3, and FIDIC contracts throughout. Introducing this topic at the core of construction law and management, this book provides students with a one-stop reference on construction contracts. Significant new material covers: procurement tendering developments in dispute settlement commentary on all key legislation, case law and contract amendments In line with new thinking in construction management research, this authoritative guide is essential reading for every construction undergraduate and an extremely useful source of reference for practitioners.

  10. Protein degradation and post-deboning tenderization in broiler breast meat with different degrees of muscle shortening

    Science.gov (United States)

    Deboning broiler breast fillets prior to rigor mortis negatively influences tenderness due to sarcomere shortening. The effects of sarcomere shortening on muscle protein degradation and breast meat tenderization during post-deboning aging are not well understood. The objective of this study was to m...

  11. Evaluation of tendered prices of natural mineral water, juice and non-alcoholic beer (public procurement research

    Directory of Open Access Journals (Sweden)

    Nataša Pomazalová

    2011-01-01

    Full Text Available The purpose of this paper is to evaluate tender prices of chosen beverages according to public procurement based on secondary data analysis. The empirical results of analysis (t-test and F-test show that average annual prices of these beverages are different and collected data are not included in the same sample. Tender prices are different in each year of observed years, although are based on public tender. Important evidence is that for the public tenders in the abroad is obligatory use of the Czech public procurement law. According to this act the base evaluation criterion is the lowest offered price. Data were collected during the years 2005–2009. This study deals with empirical approach, variability of prices of chosen beverages based on public tenders between the Czech Republic (Ministry of Defence and local suppliers in Kosovo. Results show low variability of prices, which are based on public tender and legal approach, regulated public procurement. The research conclusion is the fact, that tender prices for piece of non-alcoholic beverage are less than 10 % from annual mean (pcs./CZK of tendered prices.

  12. INVIVO 31P MAGNETIC-RESONANCE SPECTROSCOPY (MRS) OF TENDER POINTS IN PATIENTS WITH PRIMARY FIBROMYALGIA SYNDROME

    NARCIS (Netherlands)

    DEBLECOURT, AC; WOLF, RF; VANRIJSWIJK, MH; KAMMAN, RL; KNIPPING, AA; MOOYAART, EL

    1991-01-01

    31P Magnetic Resonance-Spectroscopy was performed at the site of tender points in the trapezius muscle of patients with primary fibromyalgia syndrome. Earlier, in vitro studies have reported changes in the high energy phosphate-metabolism in biopsies taken from tender points of fibromyalgia

  13. Relationships between the fibromyalgia impact questionnaire, tender point count, and muscle strength in female patients with fibromyalgia

    DEFF Research Database (Denmark)

    Henriksen, Marius; Lund, Hans Peter; Christensen, Robin

    2009-01-01

    To test the hypothesis that fibromyalgia (FM) patients with reduced lower extremity strength are more symptomatic and tender than FM patients with normal muscle strength.......To test the hypothesis that fibromyalgia (FM) patients with reduced lower extremity strength are more symptomatic and tender than FM patients with normal muscle strength....

  14. Engineering management technologies of increasing energy efficiency processes in the investment and construction projects

    Science.gov (United States)

    Borisovich Zelentsov, Leonid; Dmitrievna Mailyan, Liya; Sultanovich Shogenov, Murat

    2017-10-01

    The article deals with the problems of using the energy-efficient materials and engineering technologies during the construction of buildings and structures. As the analysis showed, one of the most important problems in this sphere is the infringement of production technologies working with energy-efficient materials. To improve the given situation, it is offered to set a technological normal at the design stage by means of working out the technological maps studying the set and the succession of operations in details, taking in mind the properties of energy-efficient materials. At Don State Technical University (DSTU) the intelligent systems of management are being developed providing organizational and technological and also informational integration of design and production stages by means of creating the single database of technological maps, volumes of work and resources.

  15. Process of constructing a lightweight x-ray flight mirror assembly

    Science.gov (United States)

    McClelland, Ryan S.; Biskach, Michael P.; Chan, Kai-Wing; Espina, Rebecca A.; Hohl, Bruce R.; Saha, Timo T.; Zhang, William W.

    2014-07-01

    Lightweight and high resolution optics are needed for future space-based x-ray telescopes to achieve advances in highenergy astrophysics. NASA's Next Generation X-ray Optics (NGXO) project has made significant progress towards building such optics, both in terms of maturing the technology for spaceflight readiness and improving the angular resolution. Technology Development Modules (TDMs) holding three pairs of mirrors have been regularly and repeatedly integrated and tested both for optical performance and mechanical strength. X-ray test results have been improved over the past year from 10.3 arc-seconds Half Power Diameter (HPD) to 8.3 arc-seconds HPD. A vibration test has been completed to NASA standard verification levels showing the optics can survive launch and pointing towards improvements in strengthening the modules through redundant bonds. A Finite Element Analysis (FEA) study was completed which shows the mirror distortion caused by bonding is insensitive to the number of bonds. Next generation TDMs, which will demonstrate a lightweight structure and mount additional pairs of mirrors, have been designed and fabricated. The light weight of the module structure is achieved through the use of E-60 Beryllium Oxide metal matrix composite material. As the angular resolution of the development modules has improved, gravity distortion during horizontal x-ray testing has become a limiting factor. To address this issue, a facility capable of testing in the vertical orientation has been designed and planned. Test boring at the construction site suggest standard caisson construction methods can be utilized to install a subterranean vertical vacuum pipe. This facility will also allow for the testing of kinematically mounted mirror segments, which greatly reduces the effect of bonding displacements. A development platform demonstrating the feasibility of kinematically mounting mirror segments has been designed, fabricated, and successfully tested.

  16. Sustainable Tourism Experiences in Ecuador; Implementing knowledge’ Social Construction process in a rural community

    Directory of Open Access Journals (Sweden)

    Johanna Rodriguez

    2018-04-01

    Full Text Available This work aims to socialize a successful experience for Social Knowledge Construction in the field of Environmental Literacy. This work takes place at the rural Afro-Ecuadorian community “San Miguel”, located in Ecuador, South America. The participants are 35 women and men, who installed a communitarian tourism project with the support of national and international rural development programs in 2005. However, any study had been executed in the location to determine the impacts on the natural and cultural heritage, since the touristic project began; in consequence, the community has not information to take decisions about their entrepreneurship. This work applied the ethnographic social research method and the techniques of semi-structured interview and community surveys to collect data. It was applied the Model of Echavarren for Assessing the Tourism Impacts on Natural and Cultural Resources. The results show that the economical contribution from the touristic project is still low but, necessary in the community. There are no relevant impacts on the natural and cultural heritage. However, an Environmental Literacy Plan based on Mendonça and the Social Knowledge Construction approach is introduced by the authors to strengthen local people environmental behavior. This plan can be adapted and applied in other communities. It is concluded that environmental literacy plans can be more efficient when are applied as transversal topics during formal and informal communitarian activities. This community members respect their agreement for keeping their natural and cultural resources for the enjoying of the future generations; even when, this represents a limited economic retribution.

  17. 77 FR 16023 - New York City Department of Environmental Protection; Notice of Application Tendered for Filing...

    Science.gov (United States)

    2012-03-19

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13287-004] New York City Department of Environmental Protection; Notice of Application Tendered for Filing With the Commission and Soliciting Additional Study Requests Take notice that the following hydroelectric application has been filed with the Commission and is available...

  18. Meat tenderness genetic polymorphisms occurrence and distribution in five Zebu breeds in Mexico

    Directory of Open Access Journals (Sweden)

    Gaspar Manuel Parra-Bracamonte

    2015-09-01

    Conclusions: Although the relatively low occurrence of favorable alleles in assessed loci may limit their use in selection programs, genotyping availability might be a practical and comprehensive tool for introgression programs by marker assisted selection and management as to improve meat tenderness of Zebu breeds.

  19. 78 FR 41390 - Pershing County Water Conservation District; Notice of Application Tendered for Filing with the...

    Science.gov (United States)

    2013-07-10

    ... Water Conservation District; Notice of Application Tendered for Filing with the Commission and... License. b. Project No.: 14327-000. c. Date filed: June 26, 2013. d. Applicant: Pershing County Water Conservation District. e. Name of Project: Humboldt River Hydro Power Project. f. Location: At the existing U.S...

  20. Tendering by municipalities of wind turbines; Aanbesteding door gemeenten van windmolens

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-04-15

    This manual provides municipalities answers to the questions of how the municipality must do the tendering for wind turbines and what choices they have [Dutch] Deze handleiding biedt gemeenten antwoorden op de vragen hoe de gemeente moet aanbesteden en welke keuzes zij daarin heeft.

  1. ANALISIS NILAI WAJAR SAHAM PUBLIK DALAM TENDER OFFER (Studi Kasus PT Bentoel Internasional Investama Tbk

    Directory of Open Access Journals (Sweden)

    Herlitah

    2014-08-01

    Full Text Available The purpose of this research is to analyze Fair Value of the stock price of PT Bentoel Internasional Investama Tbk. for tender offer after the acquisition from British American Tobacco. The Discounted Cash Flow/DCF Method of the Income Approach used for calculation within the Free Cash Flow to The Equity/FCFE Model.

  2. The effects of degree of dark cutting on tenderness and sensory attributes of beef

    Science.gov (United States)

    The objective of this study was to determine the effect of degree of dark cutting (DC) on the tenderness, juiciness, and flavor attributes of beef. During carcass grading at a large U.S. commercial beef harvesting facility, DC carcasses (n = 160) and matching normal control (NC) carcasses (n = 160)...

  3. McMurray's Test and Joint Line Tenderness for Medial Meniscus ...

    African Journals Online (AJOL)

    The wide variations reported have an impact on clinical decision concerning whether to go for other diagnostic tests before going for diagnostic arthroscopy, which is considered as the gold standard.The purpose of this study was to determine the diagnostic value of Joint line tenderness and McMurray's test, as clinical signs ...

  4. The Importance of Submarine Tenders to a Modern Naval War: Naval Combat Logistics and Seabasing

    Science.gov (United States)

    2017-04-28

    concern of political risk or consequences of sovereignty . 15. SUBJECT TERMS TENDER, SEABASING, SUBMARINE MAINTENANCE, NAVAL COMBAT LOGISTICS...anywhere in the world’s oceans, with minimal concern of political risk or consequences of sovereignty . 1 INTRODUCTION...logistics beyond the basic peacetime considerations of food and fuel. If a maritime conflict occurs in a distant theatre, the Navy will find that it

  5. Approval Procedure for Technical Specifications for Procurement by Quotation and Tender

    International Nuclear Information System (INIS)

    Shaharum Ramli; Izhar Abu Hussin; Ying, K.K.

    2015-01-01

    Technical specifications for procurement requires the approval of the Jawatankuasa Penyemak Spesifikasi Teknikal Tender/ Sebutharga Agensi Nuklear Malaysia. This paper provides guidance for those who have to prepare a technical specification. In addition, the technical specification online library is introduced to facilitate them to re-use old technical specifications for new procurements or to make those the bases for drafting new specifications. (author)

  6. Urban wastewater process by aerobic constructed wetland; Depuracion de aguas residuales urbanas utilizando un humedal artificial aerobio

    Energy Technology Data Exchange (ETDEWEB)

    Gil Rodriguez, M.

    2007-07-01

    In this paper the experiences of urban wastewater treatment are shown in an aerobic constructed wetland, using phragmites australis.They were carried out changes on the design and operation of aerobic constructed wetlands of subsurface flow, in order to increase denitrification and biodegradation rate and to diminish the surface of the installation. the flow was channeled through a long and narrow channel to get bigger biodegradation rate to approach to the plug flow performance. the active space of process consists of two sites, one first anoxic in which denitrification takes place, and in the other one the wetland in oxygenated environment the organic matters of the wastewater are consumed by biodegradation and it takes place nitrification, and utilization of nitrates and phosphates by the vegetable culture. (Author) 14 refs.

  7. Environmental Criteria in the Spanish Public Works Procurement Process

    Directory of Open Access Journals (Sweden)

    José Luis Fuentes-Bargues

    2017-02-01

    Full Text Available Green Public Procurement (GPP is defined as a process of contracting products, services, and works with the least possible damage to the environment during their life cycle. In order to improve the knowledge about GPP, a study of the use of environmental tendering criteria in the Spanish public construction sector has been performed. The results of this study show that the use of environmental criteria in Spanish public sector construction procurement is low in comparison to a certain group of countries, known as “Green 7”, in the European Union. Environmental criteria is the fourth criterion in importance, but its weight in the global of the process is much lower than other criteria such as price, memory of the construction process and the delivery time. National administrations use environmental criteria more frequently because they have more resources and staff training about environmental issues. Environmental criteria are more used in the tendering of civil projects and works whose budget exceeds ten million euro due to the environmental impact of these kind and/or size of projects.

  8. Backfitting possibilities of process instrumentation during planning, construction or operation of nuclear power plants

    International Nuclear Information System (INIS)

    Kaiser, G.E.; Schemmel, R.R.; Warren, H.D.

    1985-01-01

    The necessity for backfitting existing C and I equipment in nuclear power plants arises as a result of new licensing requirements being imposed or through a need for improved performance as experience with operating plants becomes available. These changes arise either because additional process variables need to be monitored; improved sensors need to be installed (to increase safety or operating margin); more directly sense the processes; or to address concerns in signal conditioning, control algorithms, control system strategy, or safety system design. This paper discusses examples of backfitting experiences on existing plants and some being developed for future improvements

  9. THE PIAUÍ IN THE INDEPENDENCE PROCESS: contribution to the construction of the empire in 1823

    Directory of Open Access Journals (Sweden)

    Johny Santana de Araújo

    2015-12-01

    Full Text Available This paper search to explore how happened the conducting of the independence process in Piauí in 1823. Three elements are essential to the reconstitution of this narrative, the first is the importance of the region for the maintenance Portuguese colonial empire in America. In second place the intense mobilization social and military political which are foundations for the understanding of a national discourse which was molded some years later, and ultimately the forwarding given to the prominent figures in this process, personified by the different ways followed by actors political in the post-independence.

  10. Naming without knowing and appearance without associations: evidence for constructive processes in semantic memory?

    Science.gov (United States)

    Laws, K R; Evans, J J; Hodges, J R; McCarthy, R A

    1995-01-01

    This study describes a patient (SE) with temporal lobe injury resulting from Herpes Simplex Encephalitis, who displayed a previously unreported impairment in which his knowledge of associative and functional attributes of animals was disproportionately impaired by comparison with his knowledge of their sensory attributes (including their visual properties and characteristic sounds). His knowledge of man-made objects was preserved. A striking aspect of the present case was that the patient remained able to name many animals from their pictures, despite making gross errors in generating associative information about these same animals. This suggests that a semantic representation incorporating stored sensory knowledge may be sufficient for naming (at least for biological categories) and associative information may be unnecessary. Semantic knowledge may normally incorporate more information than is necessary for identification. SE's errors were found to be confabulatory and reconstructive in nature and it is argued that this aspect of his performance challenges passive conceptions of semantic memory couched in terms of a catalogue of stored representations. It is proposed that the patient's disorder affects a dynamic, constructive, and inferential component of his knowledge base, and that this component is sensitive to semantic category.

  11. Considering PTSD from the perspective of brain processes: a psychological construction approach.

    Science.gov (United States)

    Suvak, Michael K; Barrett, Lisa Feldman

    2011-02-01

    Posttraumatic stress disorder (PTSD) is a complex psychiatric disorder that involves symptoms from various domains that appear to be produced by the combination of several mechanisms. The authors contend that existing neural accounts fail to provide a viable model that explains the emergence and maintenance of PTSD and the associated heterogeneity in the expression of this disorder (cf. Garfinkel & Liberzon, 2009). They introduce a psychological construction approach as a novel framework to probe the brain basis of PTSD, where distributed networks within the human brain are thought to correspond to the basic psychological ingredients of the mind. The authors posit that it is the combination of these ingredients that produces the heterogeneous symptom clusters in PTSD. Their goal is show that a constructionist approach has significant heuristic value in understanding the emergence and maintenance of PTSD symptoms, and leads to different and perhaps more useful conjectures about the origins and maintenance of the syndrome than the traditional hyperreactive fear account. Copyright © 2011 International Society for Traumatic Stress Studies.

  12. Radioactive Air Emissions Notice of Construction (NOC) for the 300 Area Process Sewer Cleanout

    International Nuclear Information System (INIS)

    MENARD, N.M.

    2000-01-01

    This document serves as a NOC pursuant to the requirements of Washington Administrative Code (WAC) 246-247-060, and as a request for approval to construct pursuant to 40 Code of Federal Regulations (CFR) 61.07, for the cleanout of sections of the 300 Area PS. Approval of the NOC will allow the pressure washing of certain pipe sections, the sump in the TEDF lift station, and the cleaning of PS 16 of the 300 Area PS that contains low levels of radioactivity. Section 15.0 of this NOC discusses the estimated total effective dose equivalent (TEDE) to the offsite maximally exposed individual (MEI) resulting from the unabated emissions from these cleaning activities. Using the currently approved unit dose conversion factors in HNF-3602, the estimated potential TEDE to the MEI resulting from the unabated, fugitive emissions from cleanout of the 300 Area PS is 4.70 E-05 millirem (mrem) per year. This dose was derived by conservatively estimating the doses from both the pressure washing and the use of the Guzzler(trademark) for removal of the liquid/soil mixture, as described in Section 5.0. and adding these doses together

  13. The Processes of Socialization of Heirs in Familyowned Companies: the challenge of constructing the multigenerational transition

    Directory of Open Access Journals (Sweden)

    Ana Luiza Albuquerque Cruz

    2014-08-01

    Full Text Available In the context of a family owned company, the general literature recognizes that the interaction between the family and the company is one of the main constituting and influential dimensions of the dynamics within these organizations in regards to the succession process. The main objective is to analyze the process of socialization between members of a business family and their influence in the dynamic constitution of the succession process. For such, a qualitative approach was adopted based on the technique of case study, conducted in a company in the pharmaceutical and retail sector with more than 100 years of operations in Belo Horizonte. From the interviews conducted with the researched subjects it was possible to observe that the early insertion of the successor-heir in the company dynamics allowed for him to be projected as the guardian of the family values, bearer of externally recognized competencies, depositary of the legacy and responsible for the continuity of the family. All of these capacities have contributed to legitimize the heir-successors in the process of succession of the researched company.

  14. ADVANCING THE PROCESSING TECHNOLOGIES OF THE DETAILS OF CONSTRUCTION MACHINERY AND EQUIPMENT

    Directory of Open Access Journals (Sweden)

    Burlachenko Oleg Vasil’evich

    2016-03-01

    Full Text Available On the contemporary stage on the development and advancement of processing technologies of machine and equipment details it is necessary to find a complex solution to the problem of their performance characteristics. This solution supposes the development of specific methods providing and advancing some specific index of performance efficiency (often regardless of real coupling state and the creation and implementation of the technologies having complex physical and technical impacts on the contact combination. The novelty of processing methods is determined by all the components of the technological system, each of which has its own novelty or creates the novelty of the system as a whole due to definite non-traditional combination of the known components. The system of improving the existing and creating new methods and technological processes of manufacturing the products is considered. The mechanical, physical and chemical effects on the work surface in case of specific kinematics of tool path and the workpieces during operation, and also the wear of engine cylinders are analyzed. The authors offer a technology of obtaining nonporous hot-stamped powder alloys with higher strength properties of the outer surface and high plastic properties of core. The unity of the processes of power, temperature and other effects on the working surface of details during their manufacture and operation is established.

  15. Choice by Value Encoding and Value Construction: Processes of Loss Aversion

    Science.gov (United States)

    Willemsen, Martijn C.; Bockenholt, Ulf; Johnson, Eric J.

    2011-01-01

    Loss aversion and reference dependence are 2 keystones of behavioral theories of choice, but little is known about their underlying cognitive processes. We suggest an additional account for loss aversion that supplements the current account of the value encoding of attributes as gains or losses relative to a reference point, introducing a value…

  16. A software for digital image processing used in constructions of voxels phantoms

    International Nuclear Information System (INIS)

    Vieira, Jose Wilson; Fernando Roberto de Andrade

    2008-01-01

    This paper presents, based on menus and menu items, the second version of software DIP-Digital Image Processing, that reads, edits and writes binary files containing the matrix 3D corresponding to a transversal voxels images of a certain geometry that may be a human body or other volume of interest

  17. Learning and Collective Knowledge Construction with Social Media: A Process-Oriented Perspective

    Science.gov (United States)

    Kimmerle, Joachim; Moskaliuk, Johannes; Oeberst, Aileen; Cress, Ulrike

    2015-01-01

    Social media are increasingly being used for educational purposes. The first part of this article briefly reviews literature that reports on educational applications of social media tools. The second part discusses theories that may provide a basis for analyzing the processes that are relevant for individual learning and collective knowledge…

  18. Choice by value encoding and value construction : processes of loss aversion

    NARCIS (Netherlands)

    Willemsen, M.C.; Boeckenholt, U.; Johnson, E.J.

    2011-01-01

    Loss aversion and reference dependence are 2 keystones of behavioral theories of choice, but little is known about their underlying cognitive processes. We suggest an additional account for loss aversion that supplements the current account of the value encoding of attributes as gains or losses

  19. Biological shielding design and qualification of concreting process for construction of electron beam irradiation facility

    International Nuclear Information System (INIS)

    Petwal, V.C.; Kumar, P.; Suresh, N.; Parchani, G.; Dwivedi, J.; Thakurta, A.C.

    2011-01-01

    A technology demonstration facility for irradiation of food and agricultural products is being set-up by RRCAT at Indore. The facility design is based on linear electron accelerator with maximum beam power of 10 kW and can be operated either in electron mode at 10 MeV or photon modes at 5/7.5 MeV. Biological shielding has been designed in accordance with NCRP 51 to achieve dose rate at all accessible points outside the irradiation vault less than the permissible limit of 0.1 mR/hr. In addition to radiation attenuation property, concrete must have satisfactory mechanical properties to meet the structural requirements. There are number of site specific variables which affect the structural, thermal and radiological properties of concrete, leading to considerable difference in actual values and design values. Hence it is essential to establish a suitable site and environmental specific process to cast the concrete and qualify the process by experimental measurement. For process qualification we have cast concrete test blocks of different thicknesses up to 3.25 m and evaluated the radiological and mechanical properties by radiometry, ultrasonic and mechanical tests. In this paper we describe the biological shielding design of the facility and analyse the results of tests carried out for qualification of the process. (author)

  20. COMPARISON OF EXPERIMENTAL-DESIGNS COMBINING PROCESS AND MIXTURE VARIABLES .1. DESIGN CONSTRUCTION AND THEORETICAL EVALUATION

    NARCIS (Netherlands)

    DUINEVELD, CAA; SMILDE, AK; DOORNBOS, DA

    The combination of process variables and mixture variables in experimental design is a problem which has not yet been solved. It is examined here whether a set of designs can be found which can be used for a series of models of reasonable complexity. The proposed designs are compared with known

  1. COMPARISON OF EXPERIMENTAL-DESIGNS COMBINING PROCESS AND MIXTURE VARIABLES .1. DESIGN CONSTRUCTION AND THEORETICAL EVALUATION

    NARCIS (Netherlands)

    DUINEVELD, C. A. A.; Smilde, A. K.; Doornbos, D. A.

    1993-01-01

    The combination of process variables and mixture variables in experimental design is a problem which has not yet been solved. It is examined here whether a set of designs can be found which can be used for a series of models of reasonable complexity. The proposed designs are compared with known

  2. Final audit report of remedial action construction at the UMTRA Project, Grand Junction, Colorado, processing site

    International Nuclear Information System (INIS)

    1995-02-01

    This final audit report (FAR) for remedial action at the Grand Junction, Colorado, Uranium Mill Tailings Remedial Action (UMTRA) Project processing site consists of a summary of the radiological surveillances/ audits, the quality assurance (QA) in-process surveillances, and the QA final close-out inspection performed by the US Department of Energy (DOE) and Technical Assistance Contractor (TAC). The FAR also summarizes other surveillances performed by the US Nuclear Regulatory Commission (NRC). To summarize, a total of one finding and 127 observations were noted during DOE/TAC audit and surveillance activities. The NRC noted general site-related observations during the OSCRs. Follow-up to responses required from MK-Ferguson for the DOE/TAC finding and observations indicated that all issues related to the Grand Junction processing site were resolved and closed out to the DOE's satisfaction. The NRC OSCRs resulted in no issues related to the Grand Junction processing site requiring a response from MK-Ferguson

  3. Construction of the monitoring, processing and logging systems supporting for management, operation and maintenance of the Dalat reactor control system

    International Nuclear Information System (INIS)

    Trinh Dinh Hai; Nguyen Thanh Cuong; Huynh Ton Nghiem; Phan Quoc Minh; Nguyen Duc Tuan; Nguyen Nhi Dien

    2004-01-01

    From 1/2002 to 12/2003, we implemented successfully a project, entitled 'Construction of the monitoring, processing and logging systems supporting for management, operation and maintenance of the Dalat reactor control system' under the assistance of the Ministry of Science and Technology. Its main results such as Testing Apparatus based on microcontroller for all functional boards of the Control Logic System of the Reactor Control System (RCS). Technical support CD - ROM for Process Instrumentation System, software for logging automatically information from important systems of the RCS through LAN, program for failure management of Process Instrumentation System have been playing an important role for observation, operation support, maintenance of the RCS. Through this project, the implementation group has grown up rapidly. The control and instrumentation group has been provided with some modern equipment, electronic components, and materials for maintenance work and research development in the years to come. This paper presents typical results and discussions. (author)

  4. Korea nuclear exports: Why did the Koreans win the UAE tender? Will Korea achieve its goal of exporting 80 nuclear reactors by 2030?

    International Nuclear Information System (INIS)

    Berthelemy, Michel; Leveque, Francois

    2011-01-01

    The success of Korea in winning, in December 2009, a USD 18.6 billion nuclear tender in the United Arab Emirates (UAE) has led to a growing interest in the organization and strengths of the Korean nuclear industry. In this paper, we present the main economic and political factors that explain the success of the Korean consortium. In particular, thanks to an active national program of Nuclear Power Plant (NPP) construction, Korea has developed distinct competitive advantages in terms of low cost, high credibility and high performance. At the same time, due to the important barriers to enter into the nuclear export market in the UAE, Korea has had to sacrifice its profit margin and has benefited from a strong political support from its government through export financing. More importantly, Korea's success is also due to its alliance with Westinghouse and the support of the US diplomacy. Subsequently, we show that while Korea has recently experienced setbacks in nuclear tenders, it will most certainly try to win in the short run a second nuclear tender with another aggressive price. In the longer run, Korea could take a growing share of the international market for NPPs. However, the extent to which Korea can achieve its long term export target will depend upon its capacity to finance nuclear export through export credits and upon the development of its alliance with Westinghouse. It is important to note that this paper was written before the Fukushima nuclear disaster. The scale of the human and environmental consequences of this accident are still unknown, and will undoubtedly have short and long term consequences on nuclear safety requirements and public attitude toward nuclear energy, which will most certainly impact the outlooks for nuclear new-builds. (authors)

  5. Non-retinotopic feature processing in the absence of retinotopic spatial layout and the construction of perceptual space from motion.

    Science.gov (United States)

    Ağaoğlu, Mehmet N; Herzog, Michael H; Oğmen, Haluk

    2012-10-15

    The spatial representation of a visual scene in the early visual system is well known. The optics of the eye map the three-dimensional environment onto two-dimensional images on the retina. These retinotopic representations are preserved in the early visual system. Retinotopic representations and processing are among the most prevalent concepts in visual neuroscience. However, it has long been known that a retinotopic representation of the stimulus is neither sufficient nor necessary for perception. Saccadic Stimulus Presentation Paradigm and the Ternus-Pikler displays have been used to investigate non-retinotopic processes with and without eye movements, respectively. However, neither of these paradigms eliminates the retinotopic representation of the spatial layout of the stimulus. Here, we investigated how stimulus features are processed in the absence of a retinotopic layout and in the presence of retinotopic conflict. We used anorthoscopic viewing (slit viewing) and pitted a retinotopic feature-processing hypothesis against a non-retinotopic feature-processing hypothesis. Our results support the predictions of the non-retinotopic feature-processing hypothesis and demonstrate the ability of the visual system to operate non-retinotopically at a fine feature processing level in the absence of a retinotopic spatial layout. Our results suggest that perceptual space is actively constructed from the perceptual dimension of motion. The implications of these findings for normal ecological viewing conditions are discussed. 2012 Elsevier Ltd. All rights reserved

  6. Divergent Perceptual Processes on Cyberbullying Between Victims and Aggressors: Construction of Explanatory Models

    Directory of Open Access Journals (Sweden)

    Inmaculada Fernández-Antelo

    2018-03-01

    Full Text Available Understanding the causes of adolescents' aggressive behavior in and through technological means and resources requires a thorough analysis of the criteria that they consider to be identifying and defining cyberbullying and of the network of relationships established between the different criteria. The present study has aimed at making a foray into the attempt to understand the underlying structures and mechanisms that determine aggressors' and victims' perceptions of the cyberbullying phenomenon. The sample consisted of 2148 adolescents (49.1% girls; SD = 0.5 of ages from 12 to 16 (M = 13.9; SD = 1.2. The data collected through a validated questionnaire for this study whose dimensions were confirmed from the data extracted from the focus groups and a CFA of the victim and aggressor subsamples. The analysis of the data is completed with CFA and the construction of structural models. The results have shown the importance and interdependence of imbalance of power and intention to harm in the aggressors' perceptual structure. The criteria of anonymity and repetition are related to the asymmetry of power, giving greater prominence to this factor. In its perceptual structure, the criterion “social relationship” also appears, which indicates that the manifestations of cyberbullying are sometimes interpreted as patterns of behavior that have become massively extended among the adolescent population, and have become accepted as a normalized and harmless way of communicating with other adolescents. In the victims' perceptual structure the key factor is the intention to harm, closely linked to the asymmetry of power and publicity. Anonymity, revenge and repetition are also present in this structure, although its relationship with cyberbullying is indirect. These results allow to design more effective measures of prevention and intervention closely tailored to addressing directly the factors that are considered to be predictors of risk.

  7. Divergent Perceptual Processes on Cyberbullying Between Victims and Aggressors: Construction of Explanatory Models.

    Science.gov (United States)

    Fernández-Antelo, Inmaculada; Cuadrado-Gordillo, Isabel

    2018-01-01

    Understanding the causes of adolescents' aggressive behavior in and through technological means and resources requires a thorough analysis of the criteria that they consider to be identifying and defining cyberbullying and of the network of relationships established between the different criteria. The present study has aimed at making a foray into the attempt to understand the underlying structures and mechanisms that determine aggressors' and victims' perceptions of the cyberbullying phenomenon. The sample consisted of 2148 adolescents (49.1% girls; SD = 0.5) of ages from 12 to 16 ( M = 13.9; SD = 1.2). The data collected through a validated questionnaire for this study whose dimensions were confirmed from the data extracted from the focus groups and a CFA of the victim and aggressor subsamples. The analysis of the data is completed with CFA and the construction of structural models. The results have shown the importance and interdependence of imbalance of power and intention to harm in the aggressors' perceptual structure. The criteria of anonymity and repetition are related to the asymmetry of power, giving greater prominence to this factor. In its perceptual structure, the criterion "social relationship" also appears, which indicates that the manifestations of cyberbullying are sometimes interpreted as patterns of behavior that have become massively extended among the adolescent population, and have become accepted as a normalized and harmless way of communicating with other adolescents. In the victims' perceptual structure the key factor is the intention to harm, closely linked to the asymmetry of power and publicity. Anonymity, revenge and repetition are also present in this structure, although its relationship with cyberbullying is indirect. These results allow to design more effective measures of prevention and intervention closely tailored to addressing directly the factors that are considered to be predictors of risk.

  8. Divergent Perceptual Processes on Cyberbullying Between Victims and Aggressors: Construction of Explanatory Models

    Science.gov (United States)

    Fernández-Antelo, Inmaculada; Cuadrado-Gordillo, Isabel

    2018-01-01

    Understanding the causes of adolescents' aggressive behavior in and through technological means and resources requires a thorough analysis of the criteria that they consider to be identifying and defining cyberbullying and of the network of relationships established between the different criteria. The present study has aimed at making a foray into the attempt to understand the underlying structures and mechanisms that determine aggressors' and victims' perceptions of the cyberbullying phenomenon. The sample consisted of 2148 adolescents (49.1% girls; SD = 0.5) of ages from 12 to 16 (M = 13.9; SD = 1.2). The data collected through a validated questionnaire for this study whose dimensions were confirmed from the data extracted from the focus groups and a CFA of the victim and aggressor subsamples. The analysis of the data is completed with CFA and the construction of structural models. The results have shown the importance and interdependence of imbalance of power and intention to harm in the aggressors' perceptual structure. The criteria of anonymity and repetition are related to the asymmetry of power, giving greater prominence to this factor. In its perceptual structure, the criterion “social relationship” also appears, which indicates that the manifestations of cyberbullying are sometimes interpreted as patterns of behavior that have become massively extended among the adolescent population, and have become accepted as a normalized and harmless way of communicating with other adolescents. In the victims' perceptual structure the key factor is the intention to harm, closely linked to the asymmetry of power and publicity. Anonymity, revenge and repetition are also present in this structure, although its relationship with cyberbullying is indirect. These results allow to design more effective measures of prevention and intervention closely tailored to addressing directly the factors that are considered to be predictors of risk. PMID:29632506

  9. Comprehensive Sustainability Evaluation of High-Speed Railway (HSR Construction Projects Based on Unascertained Measure and Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Yongzhi Chang

    2018-02-01

    Full Text Available This paper aims to evaluate the sustainability of high-speed railway (HSR construction projects in a comprehensive manner. To this end, the author established an index system, involving 4 primary indices, 9 secondary indices, and 32 tertiary indices. The analytic hierarchy process (AHP and the unascertained measure were introduced to calculate the weights of these indices. Then, the index system was applied to evaluate the sustainability of the China’s Harbin-Dalian Passenger Dedicated Line (PDL. The results show that the Harbin-Dalian PDL project achieved good results in terms of process, economic benefit, impact, and sustainability, and will bring long-term benefits in the fields of tourism, economy, and transport capacity, as well as many other fields. In spite of its good overall sustainability, the project needs to further increase its economic benefits and reduce its negative environmental impact. For this purpose, it is necessary to adopt the management mode of “separation between network and transportation” and apply noise prevention measures like noise barriers, tunnels, and overhead viaducts. This research lays a solid basis for the sustainability evaluation of HSR construction projects, and simplifies the modelling process for designers of HSR.

  10. Borders and Modal Articulations. Semiotic Constructs of Sensemaking Processes Enabling a Fecund Dialogue Between Cultural Psychology and Clinical Psychology.

    Science.gov (United States)

    De Luca Picione, Raffaele; Freda, Maria Francesca

    2016-03-01

    The notion of the border is an interesting advancement in research on the processes of meaning making within the cultural psychology. The development of this notion in semiotic key allows to handle with adequate complexity construction, transformation, stability and the breakup of the relationship between person/world/otherness. These semiotic implications have already been widely discussed and exposed by authors such Valsiner (2007, 2014), Neuman (2003, 2008), Simão (Culture & Psychology, 9, 449-459, 2003, Theory & Psychology, 15, 549-574, 2005, 2015), with respect to issues of identity/relatedness, inside/outside, stability/change in the irreversible flow of the time. In this work, after showing some of the basics of such semiotic notion of border, we discuss the processes of construction and transformation of borders through the modal articulation, defined as the contextual positioning that the person assumes with respect to the establishment of a boundary in terms of necessity, obligation, willingness, possibility, permission, ability. This modal subjective positioning acquires considerable interest from the clinical point of view since its degree of plasticity vs that of rigidity is the basis of processes of development or stiffening of relations between person/world/otherness.

  11. Risk Factors Influencing Construction Procurement Performance in Nigeria

    Directory of Open Access Journals (Sweden)

    Alhassan Dahiru

    2015-08-01

    Full Text Available One of the challenges facing construction procurement performance is the failure to determine the risk related factors limiting its success. These risk factors can cause a significant increase in the procurement cost leading to an increase in the overall project cost. The purpose of this study is to identify and evaluate the risk factors influencing construction procurement performance with a view to achieve the overall project performance. The objectives are to establish a relative significance index score for the most important risk factors limiting the procurement performance of the projects. A self administered questionnaire was employed to the construction industry professionals for responses. A total of 78 questionnaires were distributed to these professionals (architects, quantity surveyors, engineers, and contractors but 62 were returned and analyzed using influential index and later ranked in order of importance. Results of the analysis indicate a disparity in terms of ranking of the factors influencing construction procurement performance. Corruption related risk, conflict of interest, ineffective project technical feasibility, and lack of commitment to transparency were found to be the most significant factors limiting construction procurement performance. Communication barriers and unconfidential tender evaluation process were found to be the low weighted risk factors. The findings can serve as a supportive mechanism for risks management in public construction procurement management. Therefore, construction procurement personnel at all levels of government may find this study relevant, while improving construction procurement performance in the country. It is recommended that construction procurement system should be focused on risks related to corruption, conflict of interest, and effective technical feasibility for improving the overall project performance.

  12. Construction of evaluation indicators of the learning process for a nursing course

    Directory of Open Access Journals (Sweden)

    Luzmarina Aparecida Doretto Braccialli

    2015-03-01

    Full Text Available The objective of this study was to build process assessment indicators for a nursing undergraduate course. The indicators were validated after three stages of a consensus conference, developed by experts based on an initial matrix with 209 indicators, in four areas of competence of the course. The analysis, performed with the mean and standard deviation of each indicator, led to the final matrix, comprising 87 indicators. The experts agreed that all indicators should be in the four stages of the nursing course program, considering the degree of autonomy of the undergraduate in each stage, and the fact that it is an integrated course, oriented by competences. The indicators may support local managers in the process assessment of the nursing course, as well as help other course managers in the health area use a program oriented by competences and active learning and teaching methodologies.

  13. Constructing Consistent Multiscale Scenarios by Transdisciplinary Processes: the Case of Mountain Regions Facing Global Change

    Directory of Open Access Journals (Sweden)

    Fridolin Simon. Brand

    2013-06-01

    Full Text Available Alpine regions in Europe, in particular, face demanding local challenges, e.g., the decline in the agriculture and timber industries, and are also prone to global changes, such as in climate, with potentially severe impacts on tourism. We focus on the Visp region in the Upper Valais, Switzerland, and ask how the process of stakeholder involvement in research practice can contribute to a better understanding of the specific challenges and future development of mountainous regions under global change. Based on a coupled human-environment system (HES perspective, we carried out a formative scenario analysis to develop a set of scenarios for the future directions of the Visp region. In addition, we linked these regional scenarios to context scenarios developed at the global and Swiss levels via an external consistency analysis. This method allows the coupling of both the scenario building process and the scenarios as such. We used a functional-dynamic approach to theory-practice cooperation, i.e., the involvement of key stakeholders from, for example, tourism, forestry, and administration, differed in type and intensity during the steps of the research process. In our study, we experienced strong problem awareness among the stakeholders concerning the impacts of global change and local challenges. The guiding research question was commonly defined and problem ownership was more or less balanced. We arrived at six multiscale scenarios that open up future trajectories for the Visp region, and present generic strategies to cope with global and local challenges. The results show that local identity, spatial planning, community budget, and demographic development are important steering elements in the region's future development. We suggest that method-guided transdisciplinary processes result in a richer picture and a more systemic understanding, which enable a discussion of critical and surprising issues.

  14. Constructing Consistent Multiscale Scenarios by Transdisciplinary Processes: the Case of Mountain Regions Facing Global Change

    OpenAIRE

    Fridolin Simon. Brand; Roman Seidl; Quang Bao. Le; Julia Maria. Brändle; Roland Werner. Scholz

    2013-01-01

    Alpine regions in Europe, in particular, face demanding local challenges, e.g., the decline in the agriculture and timber industries, and are also prone to global changes, such as in climate, with potentially severe impacts on tourism. We focus on the Visp region in the Upper Valais, Switzerland, and ask how the process of stakeholder involvement in research practice can contribute to a better understanding of the specific challenges and future development of mountainous regions under global ...

  15. Life cycle environmental impacts of different construction wood waste and wood packaging waste processing methods

    OpenAIRE

    Manninen, Kaisa; Judl, Jáchym; Myllymaa, Tuuli

    2016-01-01

    This study compared the life cycle environmental impacts of different wood waste processing methods in three impact categories: climate impact, acidification impacts and eutrophication impacts. The wood waste recovery methods examined were the use of wood waste in terrace boards made out of wood composite which replace impregnated terrace boards, incineration of wood waste in a multi-fuel boiler instead of peat and the use of wood waste in the production of particleboard in either Finland or ...

  16. Construction history and construction management

    International Nuclear Information System (INIS)

    Agh, S.

    1999-01-01

    The process of pre-design and design preparation of the Mochovce NPP as well as the construction history of the plant is highlighted, including the financing aspect and problems arising from changes in the technological and other conditions of start-up of the reactor units. The results of international audits performed to improve the level of nuclear safety and implementation of the measures suggested are also described. The milestones of the whole construction process and start-up process, the control and quality system, and the methods of control and management of the complex construction project are outlined. (author)

  17. Development of the process of boron electrophoresis deposition on aluminum substate to be used in the construction of neutron detectors

    International Nuclear Information System (INIS)

    Oliveira Sampa, M.H. de; Vinhas, L.A.

    1989-11-01

    Process of baron electrophoresis depositon on large areas of aluminum substrates was developed with the aim of using them in the construction of neutron detectors. After definition and optimization of the boron electrophoresis parameters, depositions of 10 B on aluminium cylinders were performed and used as electrodes in gamma compensated and non-compensated ionization chambers and in proportional detectors. Prototypers of ionization chambers were designed, built and assembled at the Departinent for Engineering and Industry Application (TE) of the Instituto de Pesquisas Energeticas e Nucleares (IPEN), and submited for characterization tests at IEA-R1 reactor. They fully met the technical specifications of the projects. (author) [pt

  18. Visual evaluation of beef tenderness by using surface structural ...

    African Journals Online (AJOL)

    Kedibone KY. Modika

    2015-08-01

    Aug 1, 2015 ... The tenderisation process is estimated to begin soon after slaughter, depending .... spectrophotometer, which was used with the software package SpectraMagic NX Pro (Konica-Minolta) (CIE. 1986) at three ... probability.

  19. Sport participation among individuals with acquired physical disabilities: group differences on demographic, disability, and Health Action Process Approach constructs.

    Science.gov (United States)

    Perrier, Marie-Josée; Shirazipour, Celina H; Latimer-Cheung, Amy E

    2015-04-01

    Despite numerous physical, social, and mental health benefits of engaging in moderate and vigorous intensity physical activities (e.g., sport), few individuals with acquired physical disabilities currently participate in adapted sport. Theory-based sport promotion interventions are one possible way to increase the amount of individuals who engage in sport. The primary objective of this study was to examine the profiles of three different sport participation groups with respect to demographic, injury, and Health Action Process Approach (HAPA) constructs. ANOVAs and Chi-square tests were used to determine group differences on demographic and disability-related constructs. A MANCOVA was conducted to determine differences between three sport participation groups (non-intenders, intenders, and actors) with age, years post-injury, mode of mobility, and sex included as covariates. A cohort of 201 individuals was recruited; 56 (27.9%) were non-intenders, 21 (10.4%) were intenders, and 124 (61.7%) were actors. The MANCOVA revealed significant differences between groups on the HAPA constructs, F(22,370) = 9.02, p sport intentions. These results provide an important framework that adapted sport organizations can use to tailor their sport promotion programs. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Effects of Procurement Related Factors on Construction Project ...

    African Journals Online (AJOL)

    Several Literatures in construction management support the view that procurements have impacts on project performance. Aim of this study is to investigate the effects of procurement related factors of procurement selection criteria, tendering methods and variation orders on project performance. Purpose of the study is to ...

  1. Performance-based procurement for low disturbance brdige construction projects

    NARCIS (Netherlands)

    Sebastian, R.; Claeson-Jonsson, C.; Di Giulio, R.

    2013-01-01

    Purpose – This paper aims to introduce a method of performance-based procurement, based on the most economically advantageous tender (MEAT), for low-disturbance bridge construction projects in urban environment. Design/methodology/approach – The first part of this paper reviews the key performance

  2. A demonstration of applying ATS thermal screw technology to the processing of separated construction and other waste materials

    Energy Technology Data Exchange (ETDEWEB)

    Jones, D.; Golan, A.; Bosschieter, H.A.

    1991-06-01

    A demonstration was carried out by Spider Recycling, a waste haulage company, to determine how to sort, process and recycle or reuse waste disposed of by the company, using a new processing system based on the ATS thermal screw press technology. Selected loads of waste totalling one thousand tonnes from construction, sawmill, landscape and tire industries located around greater Toronto were delivered to a pilot separation and processing site and separated into piles of similar material such as wood, drywall and tires. The separated piles were drawn on as feedstock for processing through the ATS thermal screw press system to produce useable forms of product and raw material. The applications included: turning wood waste into firelogs or wood fuel; yard waste into mulch; waste drywall into gypsum powder; tires into crumb rubber; asphalt shingles into a bitumix; and mixed garbage into densified logs or flakes. Wide ranges of throughput were found depending on the material processed, material size, density, moisture content and model of the ATS thermal screw press used. It was shown that it is practical to separate selected wastes from industry and process them with the ATS machine, and that the system could probably offer recycling and reuse solutions to separable waste where product markets are available and in some cases where the operation could collect the estimated $100/tonne tipping fees available in southern Ontario. 37 figs., 20 tabs.

  3. Advanced construction materials for thermo-chemical hydrogen production from VHTR process heat

    International Nuclear Information System (INIS)

    Kosmidou, Theodora; Haehner, Peter

    2009-01-01

    The (very) high temperature reactor concept ((V)HTR) is characterized by its potential for process heat applications. The production of hydrogen by means of thermo-chemical cycles is an appealing example, since it is more efficient than electrolysis due to the direct use of process heat. The sulfur-iodine cycle is one of the best studied processes for the production of hydrogen, and solar or nuclear energy can be used as a heating source for the high temperature reaction of this process. The chemical reactions involved in the cycle are: I 2 (l) + SO 2 (g) +2 H 2 O (l) → 2HI (l) + H 2 SO 4 (l) (70-120 deg. C); H 2 SO 4 (l) → H 2 O (l) + SO 2 (g) + 1/2 O 2 (g) (800-900 deg. C); 2HI (l) → I 2 (g) + H 2 (g) (300-450 deg. C) The high temperature decomposition of sulphuric acid, which is the most endothermic reaction, results in a very aggressive chemical environment which is why suitable materials for the decomposer heat exchanger have to be identified. The class of candidate materials for the decomposer is based on SiC. In the current study, SiC based materials were tested in order to determine the residual mechanical properties (flexural strength and bending modulus, interfacial strength of brazed joints), after exposure to an SO 2 rich environment, simulating the conditions in the hydrogen production plant. Brazed SiC specimens were tested after 20, 100, 500 and 1000 hrs exposure to SO 2 rich environment at 850 o C under atmospheric pressure. The gas composition in the corrosion rig was: 9.9 H 2 O, 12.25 SO 2 , 6.13 O 2 , balance N 2 (% mol). The characterization involved: weight change monitoring, SEM microstructural analysis and four-point bending tests after exposure. Most of the specimens gained weight due to the formation of a corrosion layer as observed in the SEM. The corrosion treatment also showed an effect on the mechanical properties. In the four-point bending tests performed at room temperature and at 850 deg. C, a decrease in bending modulus with

  4. MAIA - Method for Architecture of Information Applied: methodological construct of information processing in complex contexts

    Directory of Open Access Journals (Sweden)

    Ismael de Moura Costa

    2017-04-01

    Full Text Available Introduction: Paper to presentation the MAIA Method for Architecture of Information Applied evolution, its structure, results obtained and three practical applications.Objective: Proposal of a methodological constructo for treatment of complex information, distinguishing information spaces and revealing inherent configurations of those spaces. Metodology: The argument is elaborated from theoretical research of analitical hallmark, using distinction as a way to express concepts. Phenomenology is used as a philosophical position, which considers the correlation between Subject↔Object. The research also considers the notion of interpretation as an integrating element for concepts definition. With these postulates, the steps to transform the information spaces are formulated. Results: This article explores not only how the method is structured to process information in its contexts, starting from a succession of evolutive cicles, divided in moments, which, on their turn, evolve to transformation acts. Conclusions: This article explores not only how the method is structured to process information in its contexts, starting from a succession of evolutive cicles, divided in moments, which, on their turn, evolve to transformation acts. Besides that, the article presents not only possible applications as a cientific method, but also as configuration tool in information spaces, as well as generator of ontologies. At last, but not least, presents a brief summary of the analysis made by researchers who have already evaluated the method considering the three aspects mentioned.

  5. Worldwide construction

    International Nuclear Information System (INIS)

    Williamson, M.

    1994-01-01

    The paper lists major construction projects in worldwide processing and pipelining, showing capacities, contractors, estimated costs, and time of construction. The lists are divided into refineries, petrochemical plants, sulfur recovery units, gas processing plants, pipelines, and related fuel facilities. This last classification includes cogeneration plants, coal liquefaction and gasification plants, biomass power plants, geothermal power plants, integrated coal gasification combined-cycle power plants, and a coal briquetting plant

  6. Project authorization process in the thermal power stations vs in the hydroelectric power stations: two weights, two measurements?

    International Nuclear Information System (INIS)

    Comtois, Y.

    2004-01-01

    Key topics include the long tendering process, a comparison of two projects: thermal station vs. hydroelectrical station, and the solutions towards reducing the delay in obtaining authorization. (author)

  7. Conceptual dissonance: evaluating the efficacy of natural language processing techniques for validating translational knowledge constructs.

    Science.gov (United States)

    Payne, Philip R O; Kwok, Alan; Dhaval, Rakesh; Borlawsky, Tara B

    2009-03-01

    The conduct of large-scale translational studies presents significant challenges related to the storage, management and analysis of integrative data sets. Ideally, the application of methodologies such as conceptual knowledge discovery in databases (CKDD) provides a means for moving beyond intuitive hypothesis discovery and testing in such data sets, and towards the high-throughput generation and evaluation of knowledge-anchored relationships between complex bio-molecular and phenotypic variables. However, the induction of such high-throughput hypotheses is non-trivial, and requires correspondingly high-throughput validation methodologies. In this manuscript, we describe an evaluation of the efficacy of a natural language processing-based approach to validating such hypotheses. As part of this evaluation, we will examine a phenomenon that we have labeled as "Conceptual Dissonance" in which conceptual knowledge derived from two or more sources of comparable scope and granularity cannot be readily integrated or compared using conventional methods and automated tools.

  8. Going the distance: Memory and control processes in active dependency construction.

    Science.gov (United States)

    Wagers, Matthew W; Phillips, Colin

    2014-01-01

    Filler-gap dependencies make strong demands on working memory in language comprehension because they cannot always be immediately resolved. In a series of three reading-time studies, we test the idea that these demands can be decomposed into active maintenance processes and retrieval events. Results indicate that the fact that a displaced phrase exists and the identity of its basic syntactic category both immediately impact comprehension at potential gap sites. In contrast, specific lexical details of the displaced phrase show an immediate effect only for short dependencies and a much later effect for longer dependencies. We argue that coarse-grained information about the filler is actively maintained and is used to make phrase structure parsing decisions, whereas finer grained information is more quickly released from active maintenance and consequently has to be retrieved at the gap site.

  9. Modelling and simulation of “Free Cooling” process applied to building construction

    Science.gov (United States)

    Ousegui, A.; Asbik, M.

    2018-05-01

    Thermal energy storage systems (TES), using phase change material (PCM) in building walls, consists a hot topic within the research community currently. In the present work, a numerical model is developed to simulate free cooling of air-PCM heat exchanger in both charging and discharging steps. The studied case is taken from experimental work. The domain consists in two parallel plates made of Paraffin as PCM, separate by a gap where air circulates. The flow and temperature can be adjusted. The goal is to calculate the temperature of the air at the outlet, in order to analyse the performance of the device. A good agreement was founded between experimental and numerical results. The analysis of the influence of the flow rate on the efficiency of the process confirms a previous works, that the heating flow rate should be higher than cooling one.

  10. Process and building information modelling in the construction industry by using information delivery manuals and model view definitions

    DEFF Research Database (Denmark)

    Karlshøj, Jan

    2012-01-01

    The construction industry is gradually increasing its use of structured information and building information modelling.To date, the industry has suffered from the disadvantages of a project-based organizational structure and ad hoc solutions. Furthermore, it is not used to formalizing the flow...... of information and specifying exactly which objects and properties are needed for each process and which information is produced by the processes. The present study is based on reviewing the existing methodology of Information Delivery Manuals (IDM) from Buildingsmart, which also is also an ISO standard 29481...... Part 1; and the Model View Definition (MVD) methodology developed by Buildingsmart and BLIS. The research also includes a review of concrete IDM development projects that have been developed over the last five years. Although the study has identified interest in the IDM methodology in a number...

  11. Design and construction of Keda Space Plasma Experiment (KSPEX) for the investigation of the boundary layer processes of ionospheric depletions.

    Science.gov (United States)

    Liu, Yu; Zhang, Zhongkai; Lei, Jiuhou; Cao, Jinxiang; Yu, Pengcheng; Zhang, Xiao; Xu, Liang; Zhao, Yaodong

    2016-09-01

    In this work, the design and construction of the Keda Space Plasma EXperiment (KSPEX), which aims to study the boundary layer processes of ionospheric depletions, are described in detail. The device is composed of three stainless-steel sections: two source chambers at both ends and an experimental chamber in the center. KSPEX is a steady state experimental device, in which hot filament arrays are used to produce plasmas in the two sources. A Macor-mesh design is adopted to adjust the plasma density and potential difference between the two plasmas, which creates a boundary layer with a controllable electron density gradient and inhomogeneous radial electric field. In addition, attachment chemicals can be released into the plasmas through a tailor-made needle valve which leads to the generation of negative ions plasmas. Ionospheric depletions can be modeled and simulated using KSPEX, and many micro-physical processes of the formation and evolution of an ionospheric depletion can be experimentally studied.

  12. The process of constructing a project for producing electricity from wind power in Haute Saintonge and its social unacceptability

    International Nuclear Information System (INIS)

    Canel-Depitre, Beatrice

    2017-01-01

    In front of increase of conflicts finding big environmental projects, approval of social players quickly became an essential condition in their realization, raising social acceptability to rank of priorities. To illustrate my search on social acceptability, I chose to study project of presence of an industrial wind farm on municipalities of Allas Bocage and Nieul-le-Virouil in Haute Saintonge. Methodology rests on participating observation which authorizes understanding of a group. If the social acceptability is a fragile and slow process to be built, the social unacceptability takes root durably. My problem rests on the process of construction of the social unacceptability, fruit of a different logic between promoter and local actors. My results allow me to highlight the processual dimension of the social unacceptability of one project. (author)

  13. Municipal Tender Awards and Internal Appeals by unsuccessful ...

    African Journals Online (AJOL)

    ... Regulations,2 enacted under the Local Government: Municipal Finance Management Act.3 It is argued that at present, internal appeal and dispute resolution processes do not afford unsuccessful bidders adequate protection. Keywords: Appeals; bid committee system; competitive bidding; Constitution; dispute resolution; ...

  14. Love me tender: new entry in popular music

    NARCIS (Netherlands)

    Mol, J.; Chiu, M.M.; Wijnberg, N.

    2012-01-01

    The purpose of this paper is to investigate new entry as a process of organizational change against the background of the digital revolution in the music industry. The study analyzes questionnaire data gathered from 131 companies active in the Dutch music industry that collectively engaged in 215

  15. Engineering and construction projects for oil and gas processing facilities: Contracting, uncertainty and the economics of information

    International Nuclear Information System (INIS)

    Berends, Kees

    2007-01-01

    The amount of oil and gas processing capacity required to meet demand during the next 20 years is more than twice the amount realised during the last decades. Engineering and Construction contractors (ECs) play a key role in the development and implementation of Large Engineering and Construction Projects (LECPs) for these facilities. We examine the characteristics of LECPs, demand and supply of the contracting market and the strategies traditionally adopted by owners to contract out the development and implementation of these projects to ECs. We demonstrate that these traditional strategies are not longer effective, in the current 'sellers market', to mitigate the oligopolistic economic inefficiencies. As the 'overheating' of the contracting market is expected to continue for a considerable period of time, alternative contracting strategies are required. Contract theory, particularly the economics of information on LECPs, indicates how alternative contracting strategies can be used to overcome economic inefficiencies. The effective use of these alternative strategies requires increased owner involvement and their effectiveness is contingent upon owner competency and ECs acting as the owner's agent rather than its adversary. This will require an organisational and behavioural change process for both owners and ECs

  16. Quality Cost in the Construction Industry ' Preliminary Findings in Malaysia

    Directory of Open Access Journals (Sweden)

    Mukhtar Che Ali

    2010-06-01

    Full Text Available One of the key areas being emphasis in ISO 9001 Quality Management System (QMS is performance measurement towards continual improvement. Among the primary measuring tools is quality cost approach. Quality cost has been well practice in manufacturing sector but slowly gain its importance in construction industry. In fact Project Management Body of Knowledge (PMBOK has reckoned quality cost as one of the tool and technique in few of its management processes. In view of such circumstances that has prompted an effort to undertake a study to ascertain the level of knowledge and practice on quality cost in Malaysian construction landscape. The targeted group of respondents was the personnel in the project management team. Capitalizing Construction Industry Development Board (CIDB National Electronic Tendering Initiatives (NETI road shows which were held in year 2007 throughout the country, the author was able to garner 263 respondents representing the project management team. Subsequently the data gathered from the completed forms were analyzed using Statistical Package for Social Science (SPSS software. General findings indicated that the level of knowledge and practice on quality cost among the project management team were relatively low. One of the main contributing factors was poor knowledge in the area related to quality cost. Despite of such scenario most of the respondents showed their interest in acquiring knowledge in the field of quality cost. Hence quality cost approach is at the infancy stage in Malaysian construction industry.

  17. Construction training process of highly skilled players in mini-football for competition period

    Directory of Open Access Journals (Sweden)

    Stasiuk I.I.

    2013-08-01

    Full Text Available Analyzed the structure and content of the competition period in mini-football. It was determined that the structure of the competition period consists of 4 competitive mesocycles. In each mesocycle includes various types of micro-cycles (competitive, cross-game and rehabilitation. Reflects the ratio of specific and non-specific (general preparations means training work. So in the competitive period for competitive mesocycles general preparations exercises ranged from 38.3 to 42.4%, special-preparation - from 29.9 to 32.6%, competitive - from 20.9 to 23.3%. The intensity of the training load in intergame microcycles less than competitive. This corresponds to the strategy of building the training process in the competitive period. During the competition period the ratio of the training load was: aerobic focus - 49.2%, mixed - 46.1%, anaerobic alactate - 2.4%, anaerobic glycolytic - 2.3%. Defines the scope and focus of the training load: longer the aerobic work, then - mixed, anaerobic- alactate and anaerobic-glycolytic. The comparative characteristics of the intensity of the training load in competitive and intergame microcycles.

  18. Nonradioactive air emissions notice of construction for the Waste Receiving And Processing facility

    International Nuclear Information System (INIS)

    1993-02-01

    The mission of the Waste Receiving And Processing (WRAP) Module 1 facility (also referred to as WRAP 1) is to examine assay, characterize, treat, and repackage solid radioactive and mixed waste to enable permanent disposal of the wastes in accordance with all applicable regulations. WRAP 1 will contain equipment and facilities necessary for non-destructive examination (NDE) of wastes and to perform a non-destructive examination assay (NDA) of the total radionuclide content of the wastes, without opening the outer container (e.g., 55-gal drum). WRAP 1 will also be equipped to open drums which do not meet waste acceptance and shipping criteria, and to perform limited physical treatment of the wastes to ensure that storage, shipping, and disposal criteria are met. The solid wastes to be handled in the WRAP 1 facility include low level waste (LLW), transuranic (TRU) waste, and transuranic and low level mixed wastes (LLMW). The WRAP 1 facility will only accept contact handler (CH) waste containers. A Best Available Control Technology for Toxics (TBACT) assessment has been completed for the WRAP 1 facility (WHC 1993). Because toxic emissions from the WRAP 1 facility are sufficiently low and do not pose any health or safety concerns to the public, no controls for volatile organic compounds (VOCs), and installation of HEPA filters for particulates satisfy TBACT for the facility

  19. Application of Composite Structures in Bridge Engineering. Problems of Construction Process and Strength Analysis

    Science.gov (United States)

    Flaga, Kazimierz; Furtak, Kazimierz

    2015-03-01

    Steel-concrete composite structures have been used in bridge engineering from decades. This is due to rational utilisation of the strength properties of the two materials. At the same time, the reinforced concrete (or prestressed) deck slab is more favourable than the orthotropic steel plate used in steel bridges (higher mass, better vibration damping, longer life). The most commonly found in practice are composite girder bridges, particularly in highway bridges of small and medium spans, but the spans may reach over 200 m. In larger spans steel truss girders are applied. Bridge composite structures are also employed in cable-stayed bridge decks of the main girder spans of the order of 600, 800 m. The aim of the article is to present the cionstruction process and strength analysis problems concerning of this type of structures. Much attention is paid to the design and calculation of the shear connectors characteristic for the discussed objects. The authors focused mainly on the issues of single composite structures. The effect of assembly states on the stresses and strains in composite members are highlighted. A separate part of problems is devoted to the influence of rheological factors, i.e. concrete shrinkage and creep, as well as thermal factors on the stresses and strains and redistribution of internal forces.

  20. Gaussian processes with optimal kernel construction for neuro-degenerative clinical onset prediction

    Science.gov (United States)

    Canas, Liane S.; Yvernault, Benjamin; Cash, David M.; Molteni, Erika; Veale, Tom; Benzinger, Tammie; Ourselin, Sébastien; Mead, Simon; Modat, Marc

    2018-02-01

    Gaussian Processes (GP) are a powerful tool to capture the complex time-variations of a dataset. In the context of medical imaging analysis, they allow a robust modelling even in case of highly uncertain or incomplete datasets. Predictions from GP are dependent of the covariance kernel function selected to explain the data variance. To overcome this limitation, we propose a framework to identify the optimal covariance kernel function to model the data.The optimal kernel is defined as a composition of base kernel functions used to identify correlation patterns between data points. Our approach includes a modified version of the Compositional Kernel Learning (CKL) algorithm, in which we score the kernel families using a new energy function that depends both the Bayesian Information Criterion (BIC) and the explained variance score. We applied the proposed framework to model the progression of neurodegenerative diseases over time, in particular the progression of autosomal dominantly-inherited Alzheimer's disease, and use it to predict the time to clinical onset of subjects carrying genetic mutation.

  1. Decision-making tool for the assessment and selection of construction processes based on environmental criteria: Application to precast and cast-in-situ alternatives

    OpenAIRE

    Casanovas Rubio, Maria del Mar; Ramos Schneider, Gonzalo

    2017-01-01

    This paper presents a quantitative environmental impact assessment tool for the decision making of construction processes including structures, infrastructures and buildings by means of an Environmental Impact Index (EII) to be applied at design and/or construction stages. The research is based on multi-attribute utility theory, interviews with experts representatives of the different stakeholders in construction, and an analysis of fifty-nine European and Spanish environmental legislative ac...

  2. Radioactive air emissions notice of construction for the Waste Receiving And Processing facility

    International Nuclear Information System (INIS)

    1993-02-01

    The mission of the Waste Receiving And Processing (WRAP) Module 1 facility (also referred to as WRAP 1) includes: examining, assaying, characterizing, treating, and repackaging solid radioactive and mixed waste to enable permanent disposal of the wastes in accordance with all applicable regulations. The solid wastes to be handled in the WRAP 1 facility include low-level waste (LLW), transuranic (TRU) waste, TRU mixed wastes, and low-level mixed wastes (LLMW). Airborne releases from the WRAP 1 facility will be primarily in particulate forms (99.999 percent of total unabated emissions). The release of two volatilized radionuclides, tritium and carbon-14 will contribute less than 0.001 percent of the total unabated emissions. Table 2-1 lists the radionuclides which are anticipated to be emitted from WRAP 1 exhaust stack. The Clean Air Assessment Package 1988 (CAP-88) computer code (WHC 1991) was used to calculate effective dose equivalent (EDE) from WRAP 1 to the maximally exposed offsite individual (MEI), and thus demonstrate compliance with WAC 246-247. Table 4-1 shows the dose factors derived from the CAP-88 modeling and the EDE for each radionuclide. The source term (i.e., emissions after abatement in curies per year) are multiplied by the dose factors to obtain the EDE. The total projected EDE from controlled airborne radiological emissions to the offsite MEI is 1.31E-03 mrem/year. The dose attributable to radiological emissions from WRAP 1 will, then, constitute 0.013 percent of the WAC 246-247 EDE regulatory limit of 10 mrem/year to the offsite MEI

  3. Electrical stimulation affects metabolic enzyme phosphorylation, protease activation and meat tenderization in beef

    DEFF Research Database (Denmark)

    Li, C.B.; Li, J.; Zhou, G.H.

    2012-01-01

    The objective of this study was to investigate the response of sarcoplasmic proteins in bovine longissimus muscle to low-voltage electrical stimulation (ES, 80 V, 35 s) after dressing and its contribution to meat tenderization at early postmortem time. Proteome analysis showed that ES resulted...... muscles up to 24 h. Immunohistochemistry and transmission electron microscopy further indicated that lysosomal enzymes were released at early postmortem time. ES also induced ultrastructural disruption of sarcomeres. In addition, ES accelerated (P ..., as well as pH decline and more preferred pH/temperature decline mode. Finally, ES accelerated meat tenderization with lower (P time. A possible relationship was suggested between change in phosphorylation level of energy metabolic enzymes and postmortem...

  4. LEGAL AND TAX TREATMENT OF THE ASSOCIATIONS FOR THE PARTICIPATION IN TENDERS

    Directory of Open Access Journals (Sweden)

    Alina Bilan

    2017-12-01

    Full Text Available The participation of groups of economic operators with joint tender to public procurement procedures requires the conclusion of association agreements published together with the procurement documents by the contracting authorities. The contracting authorities often require these temporary associations specific legal forms, similar to joint ventures, or certain conditions concerning their organisation and functioning. This present study analyses the associations for participation to public tenders in light of public procurement and fiscal legislation, trying to asses if these contracts are joint venture agreements, to what extent the clauses comprised in the drafts imposed in the procuremnt documents are compatible with the public procurement and fiscal laws and if they may be challenged by the economic operators.

  5. Exploring Factors of Successful Tendering Practices using Qualitative Comparative Analysis (QCA): The Study of Organizational Repetitions

    DEFF Research Database (Denmark)

    Bekdik, Baris; Thuesen, Christian

    2015-01-01

    combinations of factors leading to particular results of tendering practices. Empirical material collected through data mining in previously completed project records (quantitative data) is supported by data obtained from project managers of a general contractor company (qualitative data) in order...... to holistically describe the combination of conditions resulting in particular tender results. As a result of the analysis, a solution set is found explaining the path leading to project contract winning; previous work experience between client and general contractor together with either previous work experience...... between architect and general contractor for design-bid-build projects or senior project responsible involvement from the contractors side in design-build projects. The analysis illustrates how QCA is a powerful strategy for exploring the complexity of project practices being able to bridge the divide...

  6. Life Cycle Inventory (LCI) Data-Treatment Chemicals, Construction Materials, Transportation, On-site Equipment, and Other Processes for Use in Spreadsheets for Environmental Footprint Analysis (SEFA)

    Science.gov (United States)

    This report estimates environmental emission factors (EmF) for key chemicals, construction and treatment materials, transportation/on-site equipment, and other processes used at remediation sites. The basis for chemical, construction, and treatment material EmFs is life cycle inv...

  7. Along-Axis Structure and Crustal Construction Processes of Spreading Segments in Iceland: Implications for Magmatic Rifts

    Science.gov (United States)

    Siler, D. L.; Karson, J. A.

    2017-10-01

    Magmatic rift systems are composed of discrete spreading segments defined by morphologic, structural, and volcanic features that vary systematically along strike. In Iceland, structural features mapped in the glaciated and exhumed Miocene age upper crust correlate with analogous features in the seismically and volcanically active neovolcanic zone. Integrating information from both the active rift zones and ancient crust provides a three-dimensional perspective of crustal structure and the volcanic and tectonic processes that construct crust along spreading segments. Crustal exposures in the Skagi region of northern Iceland reveal significant along-strike variations in geologic structure. The upper crust at exhumed magmatic centers (segment centers) is characterized by a variety of intrusive rocks, high-temperature hydrothermal alteration, and geologic evidence for kilometer-scale subsidence. In contrast, the upper crust along segment limbs, which extend along strike from magmatic centers, is characterized by thick sections of gently dipping lava flows, cut by varying proportions of subvertical dikes. This structure implies relatively minor upper crustal subsidence and lateral dike intrusion. The differing modes of subsidence beneath segment centers and segment limbs require along-axis mass redistribution in the underlying upper, middle, and lower crust during crustal construction. This along-axis material transport is accomplished through lateral dike intrusion in the upper crust and by along-axis flow of magmatic to high-temperature solid-state gabbroic material in the middle and lower crust. These processes, inferred from outcrop evidence in Skagi, are consistent with processes inferred to be important during active rifting in Iceland and at analogous magmatic oceanic and continental rifts.

  8. [Rethinking the theory of melancholia (Tellenbach): its construction process and theoretical significance].

    Science.gov (United States)

    Ohmae, Susumu

    2013-01-01

    In 1961, Tellenbach published the concept of "Typus melancholicus" (melancholic type) to illustrate the complementary relationship between premelancholic (predepressive) situations and a premorbid personality. The melancholic type is often considered to be a non-universal type that is localized in Germany and Japan; however, this belief is increasingly considered to be incorrect. When referring to papers written in the United States around the time that Tellenbach's monograph was published, it is now possible to identify some personalities corresponding to the melancholic type. In the early 20th century in Germany, the precipitating events and premorbid personalities of manic-depressive illness were frequently reported by Kraepelin and other researchers. They identified a conscientious, punctual, and orderly character that is analogous to the melancholic type. However, they ignored the relationships between events and personality. For them, the etiologies of endogenous psychoses, such as schizophrenia and manic-depressive illness, should not be sought from exogenous factors, such as precipitating events and environmental factors, but from endogenous and constitutional factors. After the end of the Second World War, the traditional view of a reactive (exogenous)-endogenous dichotomy of depression increasingly began to be deemed no longer valid. Consequently, it gradually became clear that many patients develop endogenous and autonomous depression after a psychological precipitating event. Tellenbach tried to resolve the impasse in the reactive-endogenous dichotomy of depression through creation of the concept of the "endon" in place of the "endogenous" concept. Tellenbach considered the endon not as cryptogenic but as transcending the dichotomy between the somatogenic and psychogenic. The endon is represented phenomenologically as transformations of arising rhythms, transformations of form of movement, the globalism of transformations, binding to a maturing process

  9. Success and failure factors in the regional health information system design process--results from a constructive evaluation study.

    Science.gov (United States)

    Nykänen, P; Karimaa, E

    2006-01-01

    To identify success and failure factors in the design process of a regional health information system. A constructive evaluation study including interviews, observations, usability study and document analysis. Modelling was found to be a key element for the successful implementation of a health information system. The developed service chain model helped to define use cases and to implement seamless service chains. User participation in the design process was a success factor resulting in good user acceptance and signs of positive impacts on work practices. Evaluation study also helped system developers to guide the system's further development. An important failure factor identified was the lack of semantic interoperability of the system components. The results emphasize the socio-technical nature of health information systems. The starting point for development should be thorough insight into the health care work practices where the information systems are to be used. Successful system design should start from modelling of work processes, data and information flows and definition of concepts and their relations. Health informatics as a scientific discipline provides theories and models for the design and development process.

  10. Latin American Identity and The Contradictory Processes Involved in its Construction-Deconstruction-Reconfiguration in Global Contexts

    Directory of Open Access Journals (Sweden)

    Víctor Hugo Ramos

    2012-07-01

    Full Text Available This paper addresses the difficult and contradictory formation, consolidation and change processes of Latin American identity from an anthropological and holistic perspective and in the context of the emergence of the world-system from the conquest, colonization and independence struggles to its current reconfiguration in the midst of transnational globalization and the alternatives to it. This approach, which we could call dynamicsynthetic, sees identity as a constantly changing open process where contradictory dynamics interact in the construction-deconstruction-reconfiguration of Latin American identity in specific historical contexts. Our continental collective identity is analyzed as the result of complex strains among various civilizational dynamics and opposing geopolitical forces. Dialectical and dialogical processes work together to allow the “reconciliation” of converse and diverse elements in innovative syntheses and create a space for dialogue that fosters what is shared to have a positive interaction, without denying the specific. In other words, they facilitate the interaction between “we” and the “others”, the “national” and the “continental”, the “local” and the “global”, enabling a better understanding of our inclusive continental nominative process: “Hispano-American”, “Ibero-American”, “Latin American”

  11. Design and construction the identification of nitriding plasma process parameters using personal computer based on serial communication

    International Nuclear Information System (INIS)

    Frida Iswinning Diah; Slamet Santosa

    2012-01-01

    Design and construction the identification of process parameters using personal computer based on serial communication PLC M-series has been done. The function of this device is to identify the process parameters of a system (plan), to which then be analyzed and conducted a follow-up given to the plan by the user. The main component of this device is the M-Series T100MD1616 PLC and personal computer (PC). In this device the data plan parameters obtained from the corresponding sensor outputs in the form of voltage or current. While the analog parameter data is adjusted to the ADC analog input of the PLC using a signal conditioning system. Then, as the parameter is processed by the PLC then sent to a PC via RS232 to be displayed in the form of graphs or tables and stored in the database. Software to program the database is created using Visual Basic Programming V-6. The device operation test is performed for the measurement of temperature parameter and vacuum level on the plasma nitriding machine. The results indicate that the device has functioning as an identification device parameters process of plasma nitriding machine. (author)

  12. Simulating cortical development as a self constructing process: a novel multi-scale approach combining molecular and physical aspects.

    Directory of Open Access Journals (Sweden)

    Frederic Zubler

    Full Text Available Current models of embryological development focus on intracellular processes such as gene expression and protein networks, rather than on the complex relationship between subcellular processes and the collective cellular organization these processes support. We have explored this collective behavior in the context of neocortical development, by modeling the expansion of a small number of progenitor cells into a laminated cortex with layer and cell type specific projections. The developmental process is steered by a formal language analogous to genomic instructions, and takes place in a physically realistic three-dimensional environment. A common genome inserted into individual cells control their individual behaviors, and thereby gives rise to collective developmental sequences in a biologically plausible manner. The simulation begins with a single progenitor cell containing the artificial genome. This progenitor then gives rise through a lineage of offspring to distinct populations of neuronal precursors that migrate to form the cortical laminae. The precursors differentiate by extending dendrites and axons, which reproduce the experimentally determined branching patterns of a number of different neuronal cell types observed in the cat visual cortex. This result is the first comprehensive demonstration of the principles of self-construction whereby the cortical architecture develops. In addition, our model makes several testable predictions concerning cell migration and branching mechanisms.

  13. The comparative study of pressing and extrusion like processes of construction ceramic products in the Metropolitan Area of Cucuta

    International Nuclear Information System (INIS)

    Gelves, J. F.; Monroy, R.; Sanchez, J.; Ramirez, R. P.

    2013-01-01

    The present work studies the principal variables of control in the manufacturing process of construction pieces of the Metropolitan Area of San Jose de Cucuta by extrusion and pressing techniques for its forming. The investigation was taken out using clayey samples of the two principal geological formations of the region where the raw material is taken for processing at an industrial level. The clayey samples milling was made by dry means as well as by moisture means and its particle size was measured. Subsequently the forming process was taken over by using an hydraulic press and extruder with vacuum system , both equipment s at laboratory scale, the pieces shaped were dry and firing between 980 degree centigrade and 1180 degree centigrade at the end of the process the tests were made to determine water absorption, contraction and mass loss at the pieces firing. The study results left to see that the extrusion technique allowed a faster vitrification for the region's clay in comparing with the pressing technique, the contractions of drying and firing are less marked on the pressing techniques with standard deviations much lower than in extrusion. (Author) 13 refs.

  14. Rancangan Aplikasi Manajemen Dokumen Tender Berbasis Web Pada PT. Emi

    Directory of Open Access Journals (Sweden)

    Sablin Yusuf

    2010-12-01

    Full Text Available The objective of this researh is to design a software application for bidding document management as required by PT Energy Management Indonesia (EMI in order to increase the company performance. The methodology used is fact-finding through direct observation, followed by literature study, and web application development method using waterfall model and rapid prototyping for software development. The result is a software application, web based, which can increase the company performance due to the required bidding document preparation and the responding data are well stored and managed hence can be accessed easily when needed. In summary the application which is well supported by the related database will assist the company quikly and easily in bidding preparation process 

  15. Association between Neck/Shoulder Pain and Trapezius Muscle Tenderness in Office Workers

    DEFF Research Database (Denmark)

    Brandt, Mikkel; Sundstrup, Emil; Jakobsen, Markus D.

    2014-01-01

    workers. Methods. 653 employees from two large office workplaces in Copenhagen, Denmark, replied to a questionnaire on health and working conditions (mean: age 43 years, body mass index 24 kg⋅m−2, computer use 90% of work time, 73% women). Respondents rated intensity of neck/shoulder pain during...... for age, gender, and chronic disease. Results.The prevalence of “no,” “some,” and “severe” tenderness of the trapeziusmuscle was 18%, 59%, and 23% in women and 51%, 42%, and 7%inmen, respectively (chi-square, P Participants with “no,” “some,” and “severe” tenderness of the trapezius muscle......, respectively, rated their neck/shoulder pain intensity to 1.5 (SD 1.6), 3.8 (SD 2.0), and 5.7 (SD 1.9) for women and 1.4 (SD 1.4), 3.1 (SD 2.2), and 5.1 (SD 1.7) for men. For every unit increase in neck/shoulder pain intensity, the OR for one unit increase in trapezius tenderness was 1.86 (95% confidence...

  16. SELECTION OF PROJECT MANAGERS IN CONSTRUCTION FIRMS USING ANALYTIC HIERARCHY PROCESS (AHP AND FUZZY TOPSIS: A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Fatemeh Torfi

    2011-10-01

    Full Text Available Selecting a project manager is a major decision for every construction company. Traditionally, a project manager is selected by interviewing applicants and evaluating their capabilities by considering the special requirements of the project. The interviews are usually conducted by senior managers, and the selection of the best candidate depends on their opinions. Thus, the results may not be completely reliable. Moreover, conducting interviews for a large group of candidates is time-consuming. Thus, there is a need for computational models that can be used to select the most suitable applicant, given the project specifications and the applicants’ details. In this paper, a case study is performed in which a Fuzzy Multiple Criteria Decision Making (FMCDM model is used to select the best candidate for the post of project manager in a large construction firm. First, with the opinions of the senior managers, all the criteria and sub-criteria required for the selection are gathered, and the criteria priorities are qualitatively specified. Then, the applicants are ranked using the Analytic Hierarchy Process (AHP, approximate weights of the criteria, and fuzzy technique for order performance by similarity to ideal solution (TOPSIS. The results of the case study are shown to be satisfactory.

  17. A novel construction of complex-valued Gaussian processes with arbitrary spectral densities and its application to excitation energy transfer.

    Science.gov (United States)

    Chen, Xin; Cao, Jianshu; Silbey, Robert J

    2013-06-14

    The recent experimental discoveries about excitation energy transfer (EET) in light harvesting antenna (LHA) attract a lot of interest. As an open non-equilibrium quantum system, the EET demands more rigorous theoretical framework to understand the interaction between system and environment and therein the evolution of reduced density matrix. A phonon is often used to model the fluctuating environment and convolutes the reduced quantum system temporarily. In this paper, we propose a novel way to construct complex-valued Gaussian processes to describe thermal quantum phonon bath exactly by converting the convolution of influence functional into the time correlation of complex Gaussian random field. Based on the construction, we propose a rigorous and efficient computational method, the covariance decomposition and conditional propagation scheme, to simulate the temporarily entangled reduced system. The new method allows us to study the non-Markovian effect without perturbation under the influence of different spectral densities of the linear system-phonon coupling coefficients. Its application in the study of EET in the Fenna-Matthews-Olson model Hamiltonian under four different spectral densities is discussed. Since the scaling of our algorithm is linear due to its Monte Carlo nature, the future application of the method for large LHA systems is attractive. In addition, this method can be used to study the effect of correlated initial condition on the reduced dynamics in the future.

  18. Relationships between the fibromyalgia impact questionnaire, tender point count, and muscle strength in female patients with fibromyalgia

    DEFF Research Database (Denmark)

    Henriksen, Marius; Lund, Hans; Christensen, Robin

    2009-01-01

    of the patients completed version 1 of the Fibromyalgia Impact Questionnaire (FIQ) and were assessed for tender points and knee muscle strength. All subjects underwent bilateral isokinetic knee muscle strength testing in flexion and extension. Normative knee muscle strength values were calculated from the healthy......OBJECTIVE: To test the hypothesis that fibromyalgia (FM) patients with reduced lower extremity strength are more symptomatic and tender than FM patients with normal muscle strength. METHODS: A total of 840 FM patients and 122 healthy subjects were evaluated between 1998 and 2005. All....... There were no clinically significant differences between patients with low versus normal muscle strength. There were no clinically significant correlations between total FIQ score, tender point count, and muscle strength. Only 4.6% of the FIQ scores and 5.1% of the tender point counts were explained...

  19. Construction of a sputtering reactor for the coating and processing of monolithic U-Mo nuclear fuel

    International Nuclear Information System (INIS)

    Schmid, Wolfgang

    2011-01-01

    In the presented thesis sputter deposition was used for the first time to coat monolithic U-Mo nuclear fuel foils with diffusion inhibitive materials. The intention of these coatings is to prevent the formation of an interdiffusion layer between U-Mo and Al cladding during the use of the fuel. A small sputtering reactor was built, in which the method was tested and processing parameters were investigated. In parallel a larger sputtering reactor was constructed, that allows to coat full size monolithic U-Mo nuclear fuel foils and was used to test an industrial application of the technique. As a result a method based on sputter deposition and erosion can be presented, that allows to clean as well as to coat the surface of monolithic U-Mo nuclear fuel foils in excellent quality. It can be included at any time into the manufacturing chain for U-Mo fuel elements, which is currently being developed.

  20. Don't end up in the fields: identity construction among Mexican adolescent immigrants, their parents, and sociocontextual processes.

    Science.gov (United States)

    Maciel, Jose A; Knudson-Martin, Carmen

    2014-10-01

    This grounded theory study of 16 Mexican immigrant adolescents and 20 of their parents examines how they construct relational identities within their families, at school, with friends, and in the larger society. Results focus on a core identity bind faced by the adolescents: immigration messages from parents that say, "don't be like me" and the societal message, "you're not like us." Response to this bind was guided by two contrasting sets of identity narratives: Empowering narratives invited an intentional approach to school and life choices. Restricting narratives maintained an ambivalent approach to school and life choices. Resolution of the identity bind was a collective, ongoing process that has implications for Mexican immigrant families and the professionals who work with them. © 2013 American Association for Marriage and Family Therapy.

  1. Mass, energy and material balances of SRF production process. Part 2: SRF produced from construction and demolition waste.

    Science.gov (United States)

    Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku; Kärki, Janne

    2014-11-01

    In this work, the fraction of construction and demolition waste (C&D waste) complicated and economically not feasible to sort out for recycling purposes is used to produce solid recovered fuel (SRF) through mechanical treatment (MT). The paper presents the mass, energy and material balances of this SRF production process. All the process streams (input and output) produced in MT waste sorting plant to produce SRF from C&D waste are sampled and treated according to CEN standard methods for SRF. Proximate and ultimate analysis of these streams is performed and their composition is determined. Based on this analysis and composition of process streams their mass, energy and material balances are established for SRF production process. By mass balance means the overall mass flow of input waste material stream in the various output streams and material balances mean the mass flow of components of input waste material stream (such as paper and cardboard, wood, plastic (soft), plastic (hard), textile and rubber) in the various output streams of SRF production process. The results from mass balance of SRF production process showed that of the total input C&D waste material to MT waste sorting plant, 44% was recovered in the form of SRF, 5% as ferrous metal, 1% as non-ferrous metal, and 28% was sorted out as fine fraction, 18% as reject material and 4% as heavy fraction. The energy balance of this SRF production process showed that of the total input energy content of C&D waste material to MT waste sorting plant, 74% was recovered in the form of SRF, 16% belonged to the reject material and rest 10% belonged to the streams of fine fraction and heavy fraction. From the material balances of this process, mass fractions of plastic (soft), paper and cardboard, wood and plastic (hard) recovered in the SRF stream were 84%, 82%, 72% and 68% respectively of their input masses to MT plant. A high mass fraction of plastic (PVC) and rubber material was found in the reject material

  2. Sexual Activity and Physical Tenderness in Older Adults: Cross-Sectional Prevalence and Associated Characteristics.

    Science.gov (United States)

    Freak-Poli, Rosanne; Kirkman, Maggie; De Castro Lima, Gustavo; Direk, Nese; Franco, Oscar H; Tiemeier, Henning

    2017-07-01

    Despite a common misconception, older adults engage in sexual behavior. However, there is limited sexual behavior research in older adults, which is often restricted to small samples, to cohorts recruiting adults from 45 years old, and to questions regarding only sexual intercourse. To assess the cross-sectional prevalence of and characteristics associated with sexual activity and physical tenderness in community-dwelling older adults. From the Rotterdam Study, sexual activity and physical tenderness were assessed in 2,374 dementia-free, community-dwelling men and women at least 65 years old from 2009 through 2012 in the Netherlands. Analyses were stratified by sex and partner status. Sexual activity and physical tenderness (eg, fondling or kissing) in the last 6 months. Potential associated characteristics included measurements of demographics, socioeconomic position, health behavior, and health status. The vast majority of partnered participants (men, n = 858; women, n = 724) had experienced physical tenderness in the previous 6 months (83.7% of men and 82.9% of women) and nearly half had engaged in sexual activity (49.5% and 40.4% respectively). Very few unpartnered women (n = 675) had engaged in sexual activity (1.3%) or physical tenderness (5.2%), whereas prevalence rates were slightly higher for unpartnered men (n = 117; 13.7% or 17.1%). Engaging in sexual behavior was generally associated with younger age, greater social support, healthier behaviors, and better physical and psychological health. Findings show that older adults engage in sexual activity. It is important not to assume that an older person is not interested in sexual pleasure or that an older person is unhappy with not having a sexual partner. Offering an opportunity for open discussion of sexuality and medical assistance without imposing is a difficult balance. We encourage health care professionals to proactively address sexuality and extend knowledge about safe sex and sexual function

  3. Perspectives of construction robots

    Science.gov (United States)

    Stepanov, M. A.; Gridchin, A. M.

    2018-03-01

    This article is an overview of construction robots features, based on formulating the list of requirements for different types of construction robots in relation to different types of construction works.. It describes a variety of construction works and ways to construct new or to adapt existing robot designs for a construction process. Also, it shows the prospects of AI-controlled machines, implementation of automated control systems and networks on construction sites. In the end, different ways to develop and improve, including ecological aspect, the construction process through the wide robotization, creating of data communication networks and, in perspective, establishing of fully AI-controlled construction complex are formulated.

  4. The Formation of the Brazilian State and the Uses of its Foreign Policy in the Light of the Process of Identity Construction. Definition of Key Situations

    Directory of Open Access Journals (Sweden)

    Gisela Pereyra-Doval

    2013-12-01

    Full Text Available Depending on its construction of identity, a State defines key situations. The aim of this paper is to analyze those milestones in the process of identity construction in Brazil, which caused its early differentiation from other Latin American countries. Consequently, we divide it into four sections. The first explains the differentiating aspect of identity. The second analyzes the process of independence. The third makes the difference from consolidation process of the national space, also going through the development process of this space. Finally, the Brazilian option is described as being closer to the United States as a reference center while it left the European area.

  5. The process of construction of evidence: An analysis of the use of indicators in two decisions of innovation policy

    Energy Technology Data Exchange (ETDEWEB)

    Boavida, N.; Moniz, A.; Laranja, M.

    2016-07-01

    Despite increasing calls for evidence-based policies, knowledge about the practical use of evidences remains limited. This paper studies the process of construction of evidences in decisions of innovation policy to understand how evidences were used. It analysis the use of indicators and other evidences through interviews conducted to inquire about the two decisions: an electric mobility policy and a nanotechnology laboratory. Results show indicators and other evidences were brought to decision processes according to their availability and capacity to support the different interests of the actors and the stakeholders. Their role was influenced by the particular situation of the decision makers. More importantly, the use of persuasive analytical evidences appears to be related with the adversity of the policy context. In addition, research suggests that indicators are one tool among others to foster innovation decisions. In fact, the relatively minor instrumental role of indicators suggests that indicators are mostly a complementary instrument of decision. When used relevantly, indicators can offer support to a decision. But there are other significant influences that need to be taken into account to understand the specific role indicators and other evidences play, such as the social relations of the decision makers and their emotional-intuitive decisions. (Author)

  6. European MEDIA Programme: the role of 'language' and 'visual images' in the processes of constructing European culture and identity.

    Science.gov (United States)

    Bozić-Vrbancić, Senka; Vrbancić, Mario; Orlić, Olga

    2008-12-01

    Questions of diversity and multiculturalism are at the heart of many discussions on European supranational identity within contemporary anthropology, sociology, cultural studies, linguistics and so on. Since we are living in a period marked by the economic and political changes which emerged after European unification, a call for a new analysis of heterogeneity, cultural difference and issues of belonging is not surprising. This call has been fuelled by the European Union's concern with "culture" as one of the main driving forces for constructing "European identity". While the official European policy describes European culture as common to all Europeans, Europe is also-seen as representing "unity in diversity". By analysing contemporary European MEDIA policies and programs this article attempts to contribute to a small but growing body of work that explores what role "language" and "visual images" play in the process of constructing European culture and supranational European identity. More specifically, the article explores the complex articulation of language and culture in order to analyse supranational imaginary of European identity as it is expressed through the simple slogan "Europe: unity in diversity". We initially grounded our interest in the politics of identity within the European Union within theoretical frameworks of "power and knowledge" and "identity and subjectivity". We consider contemporary debates in social sciences and humanities over the concepts of language", "culture" and "identity" as inseparable from each other (Ahmed 2000; Brah 1996, 2000; Butler 1993, Derrida 1981; Gilroy 2004; Laclau 1990). Cultural and postcolonial studies theorists (e.g. Brah 1996; Bhabha 1994; Hall 1992, 1996, among others) argue that concepts of "culture" and "identity" signify a historically variable nexus of social meanings. That is to say, "culture" and "identity" are discursive articulations. According to this view, "culture" and "identity" are not separate

  7. Radioactive Air Emissions Notice of Construction for the Magnesium Hydroxide Precipitation Process at the Plutonium Finishing Plant (PFP)

    International Nuclear Information System (INIS)

    JANSKY, M.T.

    1999-01-01

    The following description and any attachments and references are provided to the Washington State Department of Health (WDOH), Division of Radiation Protection, Air Emissions and Defense Waste (WAC) 246-247, Radiation Protection-Air Emissions. The WAC 246-247-060, ''Applications, registration, and licensing'', states ''This section describes the information requirements for approval to construct, modify, and operate an emission unit. Any NOC requires the submittal of information listed in Appendix A.'' Appendix A (WAC 246-247-1 10) lists the requirements that must be addressed. Additionally, the following description, attachments and references are provided to the US Environmental Protection Agency (EPA) as an NOC, in accordance with Title 40, Code of Federal Regulations (CFR), Part 61, ''National Emission Standards for Hazardous Air Pollutants.'' The information required for submittal to the EPA is specified in 40 CFR 61.07. The potential emissions from this activity are estimated to provide greater than 0.1 millirem per year total effective dose equivalent (TEDE) to the hypothetical offsite maximally exposed individual (MEI), and commencement is needed within a short time. Therefore, this application also is intended to provide notification of the anticipated date of initial startup in accordance with the requirement listed in 40 CFR 61.09(a)(1), and it is requested that approval of this application also will constitute EPA acceptance of this initial startup notification. Written notification of the actual date of initial startup, in accordance with the requirement listed in 40 CFR 61.09(a)(2) will be provided at a later date. This NOC covers the activities associated with the Construction and operation activities involving the magnesium hydroxide precipitation process of plutonium solutions within the Plutonium Finishing Plant (PFP)

  8. Constructing core competency indicators for clinical teachers in Taiwan: a qualitative analysis and an analytic hierarchy process.

    Science.gov (United States)

    Li, Ai-Tzu; Lin, Jou-Wei

    2014-04-11

    The objective of this study was to construct a framework of core competency indicators of medical doctors who teach in the clinical setting in Taiwan and to evaluate the relative importance of the indicators among these clinical teachers. The preliminary framework of the indicators was developed from an in-depth interview conducted with 12 clinical teachers who had previously been recognized and awarded for their teaching excellence in university hospitals. The framework was categorized into 4 dimensions: 1) Expertise (i.e., professional knowledge and skill); 2) Teaching Ability; 3) Attitudes and Traits; and 4) Beliefs and Values. These areas were further divided into 11 sub-dimensions and 40 indicators. Subsequently, a questionnaire built upon this qualitative analysis was distributed to another group of 17 clinical teachers. Saaty's eigenvector approach, or the so-called analytic hierarchy process (AHP), was applied to perform the pairwise comparisons between indicators and to determine the ranking and relative importance of the indicators. Fourteen questionnaires were deemed valid for AHP assessment due to completeness of data input. The relative contribution of the four main dimensions was 31% for Attitudes and Traits, 30% for Beliefs and Values, 22% for Expertise, and 17% for Teaching Ability. Specifically, 9 out of the 10 top-ranked indicators belonged to the "Attitudes and Traits" or "Beliefs and Values" dimensions, indicating that inner characteristics (i.e., attitudes, traits, beliefs, and values) were perceived as more important than surface ones (i.e., professional knowledge, skills, and teaching competency). We performed a qualitative analysis and developed a questionnaire based upon an interview with experienced clinical teachers in Taiwan, and used this tool to construct the key features for the role model. The application has also demonstrated the relative importance in the dimensions of the core competencies for clinical teachers in Taiwan.

  9. Modelling the Determinants of Winning in Public Tendering Procedures Based on the Activity of a Selected Company

    Directory of Open Access Journals (Sweden)

    Maciej Malara

    2012-01-01

    Full Text Available The purpose of this article is to identify the factors influencing the probability of winning in public procurement procedures and to assess the strength of their impact from the perspective of both: the bidder and procurer. The research was conducted with the use of series of quantitative methods: binary logistic regression, discriminant analysis and cluster analysis. It was based on a sample consisting of public tenders, in which the examined company performed the role of a bidder. Thus, the research process was aimed at both identifying the factors of success and estimating the probability of achieving it, where it was possible to obtain probabilities. The main idea of this research is to answer questions about the utility of various methods of quantitative analysis in the case of analyzing determinants of success. Results of the research are presented in the following sequence of sections: characteristics of the examined material, the process of modelling the probability of winning, evaluation of the quality of the results obtained. (original abstract

  10. Signal formation processes in Micromegas detectors and quality control for large size detector construction for the ATLAS new small wheel

    Energy Technology Data Exchange (ETDEWEB)

    Kuger, Fabian

    2017-07-31

    The Micromegas technology is one of the most successful modern gaseous detector concepts and widely utilized in nuclear and particle physics experiments. Twenty years of R and D rendered the technology sufficiently mature to be selected as precision tracking detector for the New Small Wheel (NSW) upgrade of the ATLAS Muon spectrometer. This will be the first large scale application of Micromegas in one of the major LHC experiments. However, many of the fundamental microscopic processes in these gaseous detectors are still not fully understood and studies on several detector aspects, like the micromesh geometry, have never been addressed systematically. The studies on signal formation in Micromegas, presented in the first part of this thesis, focuses on the microscopic signal electron loss mechanisms and the amplification processes in electron gas interaction. Based on a detailed model of detector parameter dependencies, these processes are scrutinized in an iterating comparison between experimental results, theory prediction of the macroscopic observables and process simulation on the microscopic level. Utilizing the specialized detectors developed in the scope of this thesis as well as refined simulation algorithms, an unprecedented level of accuracy in the description of the microscopic processes is reached, deepening the understanding of the fundamental process in gaseous detectors. The second part is dedicated to the challenges arising with the large scale Micromegas production for the ATLAS NSW. A selection of technological choices, partially influenced or determined by the herein presented studies, are discussed alongside a final report on two production related tasks addressing the detectors' core components: For the industrial production of resistive anode PCBs a detailed quality control (QC) and quality assurance (QA) scheme as well as the therefore required testing tools have been developed. In parallel the study on micromesh parameter optimization

  11. Signal formation processes in Micromegas detectors and quality control for large size detector construction for the ATLAS new small wheel

    International Nuclear Information System (INIS)

    Kuger, Fabian

    2017-01-01

    The Micromegas technology is one of the most successful modern gaseous detector concepts and widely utilized in nuclear and particle physics experiments. Twenty years of R and D rendered the technology sufficiently mature to be selected as precision tracking detector for the New Small Wheel (NSW) upgrade of the ATLAS Muon spectrometer. This will be the first large scale application of Micromegas in one of the major LHC experiments. However, many of the fundamental microscopic processes in these gaseous detectors are still not fully understood and studies on several detector aspects, like the micromesh geometry, have never been addressed systematically. The studies on signal formation in Micromegas, presented in the first part of this thesis, focuses on the microscopic signal electron loss mechanisms and the amplification processes in electron gas interaction. Based on a detailed model of detector parameter dependencies, these processes are scrutinized in an iterating comparison between experimental results, theory prediction of the macroscopic observables and process simulation on the microscopic level. Utilizing the specialized detectors developed in the scope of this thesis as well as refined simulation algorithms, an unprecedented level of accuracy in the description of the microscopic processes is reached, deepening the understanding of the fundamental process in gaseous detectors. The second part is dedicated to the challenges arising with the large scale Micromegas production for the ATLAS NSW. A selection of technological choices, partially influenced or determined by the herein presented studies, are discussed alongside a final report on two production related tasks addressing the detectors' core components: For the industrial production of resistive anode PCBs a detailed quality control (QC) and quality assurance (QA) scheme as well as the therefore required testing tools have been developed. In parallel the study on micromesh parameter optimization

  12. Utilization of BIM for automation of quantity takeoffs and cost estimation in transport infrastructure construction projects in the Czech Republic

    Science.gov (United States)

    Vitásek, Stanislav; Matějka, Petr

    2017-09-01

    The article deals with problematic parts of automated processing of quantity takeoff (QTO) from data generated in BIM model. It focuses on models of road constructions, and uses volumes and dimensions of excavation work to create an estimate of construction costs. The article uses a case study and explorative methods to discuss possibilities and problems of data transfer from a model to a price system of construction production when such transfer is used for price estimates of construction works. Current QTOs and price tenders are made with 2D documents. This process is becoming obsolete because more modern tools can be used. The BIM phenomenon enables partial automation in processing volumes and dimensions of construction units and matching the data to units in a given price scheme. Therefore price of construction can be estimated and structured without lengthy and often imprecise manual calculations. The use of BIM for QTO is highly dependent on local market budgeting systems, therefore proper push/pull strategy is required. It also requires proper requirements specification, compatible pricing database and software.

  13. Recent advances in organic one-dimensional composite materials: design, construction, and photonic elements for information processing.

    Science.gov (United States)

    Yan, Yongli; Zhang, Chuang; Yao, Jiannian; Zhao, Yong Sheng

    2013-07-19

    Many recent activities in the use of one-dimensional nanostructures as photonic elements for optical information processing are explained by huge advantages that photonic circuits possess over traditional silicon-based electronic ones in bandwidth, heat dissipation, and resistance to electromagnetic wave interference. Organic materials are a promising candidate to support these optical-related applications, as they combine the properties of plastics with broad spectral tunability, high optical cross-section, easy fabrication, as well as low cost. Their outstanding compatibility allows organic composite structures which are made of two or more kinds of materials combined together, showing great superiority to single-component materials due to the introduced interactions among multiple constituents, such as energy transfer, electron transfer, exciton coupling, etc. The easy processability of organic 1D crystalline heterostructures enables a fine topological control of both composition and geometry, which offsets the intrinsic deficiencies of individual material. At the same time, the strong exciton-photon coupling and exciton-exciton interaction impart the excellent confinement of photons in organic microstructures, thus light can be manipulated according to our intention to realize specific functions. These collective properties indicate a potential utility of organic heterogeneous material for miniaturized photonic circuitry. Herein, focus is given on recent advances of 1D organic crystalline heterostructures, with special emphasis on the novel design, controllable construction, diverse performance, as well as wide applications in isolated photonic elements for integration. It is proposed that the highly coupled, hybrid optical networks would be an important material basis towards the creation of on-chip optical information processing. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. A Context-Driven Model for the Flat Roofs Construction Process through Sensing Systems, Internet-of-Things and Last Planner System

    Science.gov (United States)

    Andújar-Montoya, María Dolores

    2017-01-01

    The main causes of building defects are errors in the design and the construction phases. These causes related to construction are mainly due to the general lack of control of construction work and represent approximately 75% of the anomalies. In particular, one of the main causes of such anomalies, which end in building defects, is the lack of control over the physical variables of the work environment during the execution of tasks. Therefore, the high percentage of defects detected in buildings that have the root cause in the construction phase could be avoidable with a more accurate and efficient control of the process. The present work proposes a novel integration model based on information and communications technologies for the automation of both construction work and its management at the execution phase, specifically focused on the flat roof construction process. Roofs represent the second area where more defects are claimed. The proposed model is based on a Web system, supported by a service oriented architecture, for the integral management of tasks through the Last Planner System methodology, but incorporating the management of task restrictions from the physical environment variables by designing specific sensing systems. Likewise, all workers are integrated into the management process by Internet-of-Things solutions that guide them throughout the execution process in a non-intrusive and transparent way. PMID:28737693

  15. A Context-Driven Model for the Flat Roofs Construction Process through Sensing Systems, Internet-of-Things and Last Planner System.

    Science.gov (United States)

    Andújar-Montoya, María Dolores; Marcos-Jorquera, Diego; García-Botella, Francisco Manuel; Gilart-Iglesias, Virgilio

    2017-07-22

    The main causes of building defects are errors in the design and the construction phases. These causes related to construction are mainly due to the general lack of control of construction work and represent approximately 75% of the anomalies. In particular, one of the main causes of such anomalies, which end in building defects, is the lack of control over the physical variables of the work environment during the execution of tasks. Therefore, the high percentage of defects detected in buildings that have the root cause in the construction phase could be avoidable with a more accurate and efficient control of the process. The present work proposes a novel integration model based on information and communications technologies for the automation of both construction work and its management at the execution phase, specifically focused on the flat roof construction process. Roofs represent the second area where more defects are claimed. The proposed model is based on a Web system, supported by a service oriented architecture, for the integral management of tasks through the Last Planner System methodology, but incorporating the management of task restrictions from the physical environment variables by designing specific sensing systems. Likewise, all workers are integrated into the management process by Internet-of-Things solutions that guide them throughout the execution process in a non-intrusive and transparent way.

  16. Meeting the challenges of implementing an intervention to promote work ability and health-related quality of life at construction worksites: A process evaluation

    NARCIS (Netherlands)

    Oude Hengel, K.M.; Blatter, B.M.; Molen, H.F. van der; Joling, C.I.; Proper, K.I.; Bongers, P.M.; Beek, A.J. van der

    2011-01-01

    Objective: To evaluate the process of a prevention program among construction workers. Methods: The program consisted of training sessions of a physical therapist and an empowerment trainer, and a Rest-Break Tool. Data on seven process items were collected by means of questionnaires and interviews.

  17. Effect of Wagyu- versus Angus-sired calves on feedlot performance, carcass characteristics, and tenderness.

    Science.gov (United States)

    Radunz, A E; Loerch, S C; Lowe, G D; Fluharty, F L; Zerby, H N

    2009-09-01

    Wagyu-sired (n = 20) and Angus-sired (n = 19) steers and heifers were used to compare the effects of sire breed on feedlot performance, carcass characteristics, and meat tenderness. Calves were weaned at 138 +/- 5 d of age and individually fed a finishing diet consisting of 65% whole corn, 20% protein/vitamin/mineral supplement, and 15% corn silage on a DM basis. Heifers and steers were slaughtered at 535 and 560 kg of BW, respectively. Carcasses were ribbed between the 12th and 13th (USDA grading system) and the 6th and 7th ribs (Japanese grading system) to measure fat thickness, LM area (LMA), and intramuscular fat (IMF). Two steaks were removed from the 12th rib location and aged for 72 h and 14 d to determine Warner-Bratzler shear force and cooking loss. Sire breed x sex interactions were not significant (P > 0.05). Angus-sired calves had greater (P Angus. Sire breed did not affect (P > 0.20) HCW, 12th-rib fat, or USDA yield grade. Carcasses of Wagyu had greater (P = 0.0001) marbling scores at the 12th rib than those of Angus (770.9 vs. 597.3 +/- 41.01, respectively). Carcasses of Wagyu also had greater (P Angus, resulting in a greater proportion of carcasses grading Prime (65.0 vs. 21.1%; P = 0.006). Carcasses from Wagyu tended (P = 0.08) to have greater LMA at the 12th rib, whereas Angus carcasses had greater (P Angus and Wagyu had similar (P > 0.50) tenderness at aging times of 72 h and 14 d. Cooking loss was greater (P Angus than Wagyu steaks at 72 h and 14 d. Using Wagyu sires vs. Angus sires on British-based commercial cows combined with early weaning management strategies has the potential to produce a product with greater marbling, but is unlikely to significantly enhance tenderness.

  18. RESULTS OF INTRODUCTION OF A PROCESS APPROACH TO MANAGEMENT OF SUBJECTS OF SMALL BUSINESS (on an example of logistic service of the construction enterprise

    Directory of Open Access Journals (Sweden)

    E. V. Folomeev

    2013-01-01

    Full Text Available The article is devoted to subjects of small business of construction branch, their place in branch and to problems of management by them. The question of need of introduction of the most effective methods of management by the construction organization, in particular, a process approach is brought up. In article the characteristic of separate elements of this approach is given, methods and ways of their realization at the enterprise from the point of view of allocation and optimization of costs of the enterprise from the logistical point of view are considered and results of its introduction on an example of logistic service of the construction enterprise are given..

  19. Construction solutions for the exterior walls in the process of increasing the width of residential buildings of brownfield construction in seismic hazardousand dry hot conditions of Central Asia

    Directory of Open Access Journals (Sweden)

    Usmonov Shukhrat Zaurovich

    2014-02-01

    Full Text Available The main object of this study is the reconstruction, renovation and modernization of the housing built in the period 1975—1985. These buildings have low energy efficiency due to the poor thermal insulation properties of the walls. These apartments do not meet the necessary requirements for year round warmth and comfort.Reconstruction is more preferable, than new-build, because of the cost saving for the land acquisition. Reconstruction is generally 1.5 times cheaper than new-build with 25—40 % reduced cost on building materials and engineering infrastructure.Increasing the width of the apartment blocks from 12 to 15 m can save 9—10 % on the consumption of thermal energy for heating and reduce the m2 construction cost by 5.5—7.0 %. In—5-9 storey high-rise buildings the savings are 3—5 %.Therefore, the width of the apartment block should preferably be between 9—12 m but could be extended to 18 m. The depth of the apartments themselves will be 5.4 — 6.0 —7.2 or 9.0 m. During the reconstruction of 5-storey residential buildings (Building Type105 in a seismic zone, an increase in the width of the block and the lateral stiffness of the building is achieved by building a new reinforced concrete (RC frame on both sides of the building with a depth of between 2 and 6 m. This technique is especially effective in increasing the seismic resistance of the building. Self-supporting walls of cellular concrete blocks (density 600 kg/m3 and a thickness of 300 mm are constructed on the outside of the frame, taking care to avoid cold bridges.Model studies have shown that in the conditions of hot-arid climate the thickness of the air gap in a ventilated facade does not significantly change the cooling-energy consumption of the building, and heating consumption is significantly increased. The building's energy consumption is most influenced by the volume of the air in the air gap. By increasing the ventilation rate in the air gap, the energy

  20. Fine-mapping of a QTL influencing pork tenderness on porcine chromosome 2

    Directory of Open Access Journals (Sweden)

    Beever Jonathan E

    2007-10-01

    Full Text Available Abstract Background In a previous study, a quantitative trait locus (QTL exhibiting large effects on both Instron shear force and taste panel tenderness was detected within the Illinois Meat Quality Pedigree (IMQP. This QTL mapped to the q arm of porcine chromosome 2 (SSC2q. Comparative analysis of SSC2q indicates that it is orthologous to a segment of human chromosome 5 (HSA5 containing a strong positional candidate gene, calpastatin (CAST. CAST polymorphisms have recently been shown to be associated with meat quality characteristics; however, the possible involvement of other genes and/or molecular variation in this region cannot be excluded, thus requiring fine-mapping of the QTL. Results Recent advances in porcine genome resources, including high-resolution radiation hybrid and bacterial artificial chromosome (BAC physical maps, were utilized for development of novel informative markers. Marker density in the ~30-Mb region surrounding the most likely QTL position was increased by addition of eighteen new microsatellite markers, including nine publicly-available and nine novel markers. Two newly-developed markers were derived from a porcine BAC clone containing the CAST gene. Refinement of the QTL position was achieved through linkage and haplotype analyses. Within-family linkage analyses revealed at least two families segregating for a highly-significant QTL in strong positional agreement with CAST markers. A combined analysis of these two families yielded QTL intervals of 36 cM and 7 cM for Instron shear force and taste panel tenderness, respectively, while haplotype analyses suggested further refinement to a 1.8 cM interval containing CAST markers. The presence of additional tenderness QTL on SSC2q was also suggested. Conclusion These results reinforce CAST as a strong positional candidate. Further analysis of CAST molecular variation within the IMQP F1 boars should enhance understanding of the molecular basis of pork tenderness, and thus