Improvement of transport-corrected scattering stability and performance using a Jacobi inscatter algorithm for 2D-MOC

International Nuclear Information System (INIS)

Stimpson, Shane; Collins, Benjamin; Kochunas, Brendan

2017-01-01

The MPACT code, being developed collaboratively by the University of Michigan and Oak Ridge National Laboratory, is the primary deterministic neutron transport solver being deployed within the Virtual Environment for Reactor Applications (VERA) as part of the Consortium for Advanced Simulation of Light Water Reactors (CASL). In many applications of the MPACT code, transport-corrected scattering has proven to be an obstacle in terms of stability, and considerable effort has been made to try to resolve the convergence issues that arise from it. Most of the convergence problems seem related to the transport-corrected cross sections, particularly when used in the 2D method of characteristics (MOC) solver, which is the focus of this work. Here in this paper, the stability and performance of the 2-D MOC solver in MPACT is evaluated for two iteration schemes: Gauss-Seidel and Jacobi. With the Gauss-Seidel approach, as the MOC solver loops over groups, it uses the flux solution from the previous group to construct the inscatter source for the next group. Alternatively, the Jacobi approach uses only the fluxes from the previous outer iteration to determine the inscatter source for each group. Consequently for the Jacobi iteration, the loop over groups can be moved from the outermost loop-as is the case with the Gauss-Seidel sweeper-to the innermost loop, allowing for a substantial increase in efficiency by minimizing the overhead of retrieving segment, region, and surface index information from the ray tracing data. Several test problems are assessed: (1) Babcock & Wilcox 1810 Core I, (2) Dimple S01A-Sq, (3) VERA Progression Problem 5a, and (4) VERA Problem 2a. The Jacobi iteration exhibits better stability than Gauss-Seidel, allowing for converged solutions to be obtained over a much wider range of iteration control parameters. Additionally, the MOC solve time with the Jacobi approach is roughly 2.0-2.5× faster per sweep. While the performance and stability of the Jacobi

Intercalibration of MOCNESS and Bongo nets: Assessing relative efficiency for ichthyoplankton

Science.gov (United States)

Johnson, Donna L.; Fogarty, Michael J.

2013-01-01

The evaluation of catchability of egg and larval fish with the 0.61-m Bongo and the 1-m2 Multiple Opening and Closing Net Environmental Sensing System (MOCNESS) was conducted as part of a paired station analysis. The two samplers were deployed on 331 stations on Georges Bank during the U.S. GLOBEC program from January through June for years 1996 and 1997. Significant differences were found when combined catches of all eggs and all larvae for each sampler were compared. Overall catches of larvae from the MOCNESS were 3-5 times greater than those from the Bongo. Gear effects were modeled and revealed that the catches in 14 of the 22 dominant taxa were significantly different between sampling gear. The differences between samplers during diel intervals for the taxa were not significantly different.

The role of Meridional Overturning Circulation (MOC) on Ancient Climates and Implications for Anthropogenic Climate Change

Science.gov (United States)

Cumming, M.

2017-12-01

Our increasingly robust history of ancient climates indicates that high latitude glaciation is the ultimate product of an episodic cooling trend that began about 100-million years ago rather than a result of a yet-to-be identified modal change. Antarctic geography (continent surrounded by ocean) allowed ice to develop prior to significant glaciation in the Northern Hemisphere (ocean surrounded by land), but global ice volume generally increased as Earth cooled. The question of what caused the Ice Ages should be reframed as to "What caused the Cenozoic Cooling?" Records tell us that changes in temperature and CO2 levels rise and fall together, however it is not clear when CO2 acts as a driver versus when it is primarily an indicator of temperature change. The episodic nature of the cooling trend suggests other more dynamic phenomena are involved. It is proposed that oceanic meridional overturning circulation (MOC) plays a significant role in regulating Earth's surface temperature. Robust MOC has a cooling effect which results from its sequestration of cold waters (together with their increased heat-absorbing potential) below the surface. Unable to better absorb equatorial insolation for great lengths of time, oceanic deep waters are not able to fully compensate for the heat lost by warm-water transport to Polar Regions. A lag-time between cooling and subsequent warming yields lower operating temperatures commensurate with the strength of global MOC. The long-term decline in global temperatures is largely explained by the tectonic reshaping of ocean basins and the connections between them such that MOC has generally, but not uniformly, increased. Geophysically Influenced MOC (GIMOC) has caused a significant proportion of the lowering of global temperatures in the Cenozoic Era. Short-term disruptions in MOC (and subsequent impacts on global temperatures) were likely involved in Late Pleistocene glacial termination events and may already be compounding present

Intercalibration of MOCNESS and Bongo nets: Assessing relative efficiency for ichthyoplankton

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The evaluation in catchability of egg and larval fish with the 0.61-m Bongo and the 1-m2 Multiple Opening and Closing Net Environmental Sensing System (MOCNESS) was...

An Anthropogenic Radioisotope, Iodine 129, As A Tracer For Studying The Northern Limb of The Meridional Overturning Circulation (moc)

Science.gov (United States)

Gascard, J. C.; Raisbeck, G.; Yiou, F.; Sequeira, S.; Mork, K. A.

A number of observations taken during the 1990s, seem to corroborate the fact that the northern limb of the Meridional Overturning Circulation (the so-called MOC), is undergoing large scale variability. Arctic Sea-Ice thinning, Overflows slackening, Labrador and Greenland Seas Deep Convection weakening, have recently been re- ported. Can this large scale variability be interpreted as a natural variability of the MOC or is it more related to global changes due to anthropogenic effects like green- house gases enhancing Global Warming at High Latitudes ? Iodine 129 resulting from reprocessing nuclear wastes at La Hague (France) and Sellafield (UK), has penetrated through all the various parts of the MOC from the Source: the Norwegian Coastal Current (NCC) collecting Iodine 129 from the North Sea, to the Sink: the Greenland- Iceland-Scotland Overflows and ultimately to the North Atlantic Deep Waters via the Deep Western Boundary Current. During recent years, discharges of Iodine 129 have increased drastically and peaks in Iodine 129 concentrations have already been ob- served all along the coast of Norway. In this talk, we will first present the most recent results showing the transfer of Iodine 129 through the various parts of the MOC from the NCC down to the North Atlantic Overflows (Denmark Strait), and second, explain how this results allow us to improve our understanding of the MOC system and in particular its variability. This is an important issue for improving reliability of actual numerical simulations of past, present and future behavior of the MOC, which has strong implications for climate related problems.

Structural properties of the linkers connecting the N- and C- terminal domains in the MocR bacterial transcriptional regulators

Directory of Open Access Journals (Sweden)

Teresa Milano

2016-12-01

Full Text Available Peptide inter-domain linkers are peptide segments covalently linking two adjacent domains within a protein. Linkers play a variety of structural and functional roles in naturally occurring proteins. In this work we analyze the sequence properties of the predicted linker regions of the bacterial transcriptional regulators belonging to the recently discovered MocR subfamily of the GntR regulators. Analyses were carried out on the MocR sequences taken from the phyla Actinobacteria, Firmicutes, Alpha-, Beta- and Gammaproteobacteria. The results suggest that MocR linkers display phylum-specific characteristics and unique features different from those already described for other classes of inter-domain linkers. They show an average length significantly higher: 31.8 ± 14.3 residues reaching a maximum of about 150 residues. Compositional propensities displayed general and phylum-specific trends. Pro is dominating in all linkers. Dyad propensity analysis indicate Pro–Pro as the most frequent amino acid pair in all linkers. Physicochemical properties of the linker regions were assessed using amino acid indices relative to different features: in general, MocR linkers are flexible, hydrophilic and display propensity for β-turn or coil conformations. Linker sequences are hypervariable: only similarities between MocR linkers from organisms related at the level of species or genus could be found with sequence searches. The results shed light on the properties of the linker regions of the new MocR subfamily of bacterial regulators and may provide knowledge-based rules for designing artificial linkers with desired properties.

Origem do plexo braquial de mocós (Kerodon rupestris wied, 1820

Directory of Open Access Journals (Sweden)

Jailson José Santana

2003-01-01

Full Text Available O mocó, Kerodon rupestris, um mamífero roedor da família dos cavídeos muito parecido com preá, é um animal altamente adaptado às condições de calor e de escassez de água e de alimento, principalmente nos períodos das grandes secas que assolam periodicamente a região do semi-árido nordestino. Verifica-se que na literatura há escassez de dados referentes à anatomia funcional dos mocós e, em especial de trabalhos envolvendo a anatomia do sistema nervoso. Objetivando elucidar o comportamento anatômico do plexo braquial de mocó e com o propósito de contribuir para o desenvolvimento da neuroanatomia comparada, procedeu-se esta pesquisa, na qual foram utilizados dez animais adultos de diferentes idades (nove machos e uma fêmea que vieram a óbito no Centro de Multiplicação de Animais Silvestres (CEMAS da Escola Superior de Agricultura de Mossoró-ESAM. Após a fixação em solução aquosa de formol a 10,00%, realizou-se a dissecação bilateral da origem dos plexos braquiais, sendo os resultados registrados em desenhos esquemáticos, e suas disposições agrupadas em tabelas para posterior análise estatística, fundamentada na freqüência percentual. Observando-se que o plexo braquial de mocó é resultante de comunicações estabelecidas, principalmente, entre os ramos ventrais dos três últimos nervos cervicais e dos dois primeiros nervos torácicos, havendo contribuição do quinto nervo cervical em 35,00% dos casos. O plexo braquial originou-se mais freqüentemente a partir de C6, C7, C8, T1 e T2, consiguando-se em 40,00% das dissecações.

Exposure Characteristics of Construction Painters to Organic Solvents

Directory of Open Access Journals (Sweden)

Hyunhee Park

2016-03-01

Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

Observações sôbre o bronzeado do algodoeiro Mocó Observations on bronzing of the Mocó cotton

Directory of Open Access Journals (Sweden)

A. S. Costa

1955-01-01

Full Text Available Uma anomalia do algodoeiro Mocó, denominada bronzeado, vem sendo observada na região do Seridó, Rio Grande do Norte, durante os últimos três anos. Pensou-se, a princípio, que esta anomalia fôsse causada por um vírus, mas as observações relatadas neste trabalho indicam que é causada por um ácaro. As fôlhas das plantas afetadas, especialmente aquelas da metade superior dos galhos, mostram uma coloração bronzeada no lado de baixo. Essa face da fôlha tem também uma superfície rugosa, com brilho vidrado (est. 1, B, as vezes com pequenas áreas de tecido cicatricial. Vistas pelo lado de cima são mais rugosas do que as normais e têm os bordos curvados para baixo. Nos casos graves, as fôlhas do topo dos galhos morrem e caem (est. 2, A e B. A espécie de ácaro causadora do bronzeado do algodoeiro Mocó foi identificada por H. H. Keifer, Sacramento, Calif., como pertencente a um gênero ainda não descrito da família Eriophyidae. Esta espécie está sendo presentemente denominada Anthocoptes sp. até que a sua descrição seja publicada. Populações de 500 a 1.000 indivíduos por centímetro quadrado de fôlha já foram encontradas. Esse ácaro parece ser muito sensível às condições do ambiente, visto que as populações da praga variam entre grandes limites.For the last three years a bronzing anomaly of cotton plants of the Mocó variety (Gossypium hirsutum L. var. maria galante Hutch. has been recorded in the Seridó region (a semi-arid region in the north-eastern part of Brazil, state of Rio Grande do Norte. This anomaly was first thought to be of virus origin, but the observations reported in this paper indicated that it is due to the attack by a species of mite. Leaves from affected plants, especially those on the upper half of the branches, show a bronzing discoloration on the dorsal side, frequently accompanied by a rough and ventral side of these leaves shows some rugosity not present in normal leaves, and in most cases

Elasticity, electronic properties and hardness of MoC investigated by first principles calculations

International Nuclear Information System (INIS)

Liu, YangZhen; Jiang, YeHua; Feng, Jing; Zhou, Rong

2013-01-01

The crystal structure, cohesive energy, formation enthalpy, mechanical anisotropy, electronic properties and hardness of α−MoC, β−MoC and γ−MoC are investigated by the first-principles calculations. The elastic constants and the bulk moduli, shear moduli, Young's moduli are calculated. The Young's modulus values of α−MoC, β−MoC and γ−MoC are 395.6 GPa, 551.2 GPa and 399.5 GPa, respectively. The surface constructions of Young's moduli identify the mechanical anisotropy of molybdenum carbide, and the results show that anisotropy of α−MoC is stronger than others. The electronic structure indicates that the bonding behaviors of MoC are the combinations of covalent and metallic bonds. The hardness of β−MoC is obviously higher than those of α−MoC and γ−MoC

Constructing inverse probability weights for continuous exposures: a comparison of methods.

Science.gov (United States)

Naimi, Ashley I; Moodie, Erica E M; Auger, Nathalie; Kaufman, Jay S

2014-03-01

Inverse probability-weighted marginal structural models with binary exposures are common in epidemiology. Constructing inverse probability weights for a continuous exposure can be complicated by the presence of outliers, and the need to identify a parametric form for the exposure and account for nonconstant exposure variance. We explored the performance of various methods to construct inverse probability weights for continuous exposures using Monte Carlo simulation. We generated two continuous exposures and binary outcomes using data sampled from a large empirical cohort. The first exposure followed a normal distribution with homoscedastic variance. The second exposure followed a contaminated Poisson distribution, with heteroscedastic variance equal to the conditional mean. We assessed six methods to construct inverse probability weights using: a normal distribution, a normal distribution with heteroscedastic variance, a truncated normal distribution with heteroscedastic variance, a gamma distribution, a t distribution (1, 3, and 5 degrees of freedom), and a quantile binning approach (based on 10, 15, and 20 exposure categories). We estimated the marginal odds ratio for a single-unit increase in each simulated exposure in a regression model weighted by the inverse probability weights constructed using each approach, and then computed the bias and mean squared error for each method. For the homoscedastic exposure, the standard normal, gamma, and quantile binning approaches performed best. For the heteroscedastic exposure, the quantile binning, gamma, and heteroscedastic normal approaches performed best. Our results suggest that the quantile binning approach is a simple and versatile way to construct inverse probability weights for continuous exposures.

Personal exposure to inhalable cement dust among construction workers.

Science.gov (United States)

Peters, Susan; Thomassen, Yngvar; Fechter-Rink, Edeltraud; Kromhout, Hans

2009-01-01

Objective- A case study was carried out to assess cement dust exposure and its determinants among construction workers and for comparison among workers in cement and concrete production.Methods- Full-shift personal exposure measurements were performed and samples were analysed for inhalable dust and its cement content. Exposure variability was modelled with linear mixed models.Results- Inhalable dust concentrations at the construction site ranged from 0.05 to 34 mg/m(3), with a mean of 1.0 mg/m(3). Average concentration for inhalable cement dust was 0.3 mg/m(3) (GM; range 0.02-17 mg/m(3)). Levels in the ready-mix and pre-cast concrete plants were on average 0.5 mg/m(3) (GM) for inhalable dust and 0.2 mg/m(3) (GM) for inhalable cement dust. Highest concentrations were measured in cement production, particularly during cleaning tasks (inhalable dust GM = 55 mg/m(3); inhalable cement dust GM = 33 mg/m(3)) at which point the workers wore personal protective equipment. Elemental measurements showed highest but very variable cement percentages in the cement plant and very low percentages during reinforcement work and pouring. Most likely other sources were contributing to dust concentrations, particularly at the construction site. Within job groups, temporal variability in exposure concentrations generally outweighed differences in average concentrations between workers. 'Using a broom', 'outdoor wind speed' and 'presence of rain' were overall the most influential factors affecting inhalable (cement) dust exposure.Conclusion- Job type appeared to be the main predictor of exposure to inhalable (cement) dust at the construction site. Inhalable dust concentrations in cement production plants, especially during cleaning tasks, are usually considerably higher than at the construction site.

An acceleration technique for 2D MOC based on Krylov subspace and domain decomposition methods

International Nuclear Information System (INIS)

Zhang Hongbo; Wu Hongchun; Cao Liangzhi

2011-01-01

Highlights: → We convert MOC into linear system solved by GMRES as an acceleration method. → We use domain decomposition method to overcome the inefficiency on large matrices. → Parallel technology is applied and a matched ray tracing system is developed. → Results show good efficiency even in large-scale and strong scattering problems. → The emphasis is that the technique is geometry-flexible. - Abstract: The method of characteristics (MOC) has great geometrical flexibility but poor computational efficiency in neutron transport calculations. The generalized minimal residual (GMRES) method, a type of Krylov subspace method, is utilized to accelerate a 2D generalized geometry characteristics solver AutoMOC. In this technique, a form of linear algebraic equation system for angular flux moments and boundary fluxes is derived to replace the conventional characteristics sweep (i.e. inner iteration) scheme, and then the GMRES method is implemented as an efficient linear system solver. This acceleration method is proved to be reliable in theory and simple for implementation. Furthermore, as introducing no restriction in geometry treatment, it is suitable for acceleration of an arbitrary geometry MOC solver. However, it is observed that the speedup decreases when the matrix becomes larger. The spatial domain decomposition method and multiprocessing parallel technology are then employed to overcome the problem. The calculation domain is partitioned into several sub-domains. For each of them, a smaller matrix is established and solved by GMRES; and the adjacent sub-domains are coupled by 'inner-edges', where the trajectory mismatches are considered adequately. Moreover, a matched ray tracing system is developed on the basis of AutoCAD, which allows a user to define the sub-domains on demand conveniently. Numerical results demonstrate that the acceleration techniques are efficient without loss of accuracy, even in the case of large-scale and strong scattering

Determinants of dust exposure in tunnel construction work.

Science.gov (United States)

Bakke, Berit; Stewart, Patricia; Eduard, Wijnand

2002-11-01

In tunnel construction work, dust is generated from rock drilling, rock bolting, grinding, scaling, and transport operations. Other important dust-generating activities are blasting rock and spraying wet concrete on tunnel walls for strength and finishing work. The aim of this study was to identify determinants of dust exposure in tunnel construction work and to propose control measures. Personal exposures to total dust, respirable dust, and alpha-quartz were measured among 209 construction workers who were divided into 8 job groups performing similar tasks: drill and blast workers, shaft drilling workers, tunnel boring machine workers, shotcreting operators, support workers, concrete workers, outdoor concrete workers, and electricians. Information on determinants was obtained from interviewing the workers, observation by the industrial hygienist responsible for the sampling, and the job site superintendent. Multivariate regression models were used to identify determinants associated with the dust exposures within the job groups. The geometric mean exposure to total dust, respirable dust, and alpha-quartz for all tunnel workers was 3.5 mg/m(3) (GSD = 2.6), 1.2 mg/m(3) (GSD = 2.4), and 0.035 mg/m(3) (GSD = 5.0), respectively. A total of 15 percent of the total dust measurements, 5 percent of the respirable dust, and 21 percent of the alpha-quartz exceeded the Norwegian OELs of 10 mg/m(3), 5 mg/m(3), and 0.1 mg/m(3), respectively. Job groups with highest geometric mean total dust exposure were shotcreting operators (6.8 mg/m(3)), tunnel boring machine workers (6.2 mg/m(3)), and shaft drilling workers (6.1 mg/m(3)). The lowest exposed groups to total dust were outdoor concrete workers (1.0 mg/m(3)), electricians (1.4 mg/m(3)), and support workers (1.9 mg/m(3)). Important determinants of exposure were job group, job site, certain tasks (e.g., drilling and scaling), the presence of a cab, and breakthrough of the tunnel. The use of ventilated, closed cabs appeared to be

Personal exposure to inhalable cement dust among construction workers.

NARCIS (Netherlands)

Peters, S.M.; Thomassen, Y.; Fechter-Rink, E.; Kromhout, H.

2009-01-01

Objective- A case study was carried out to assess cement dust exposure and its determinants among construction workers and for comparison among workers in cement and concrete production.Methods- Full-shift personal exposure measurements were performed and samples were analysed for inhalable dust and

Personal exposure to inhalable cement dust among construction workers

International Nuclear Information System (INIS)

Peters, Susan; Kromhout, Hans; Thomassen, Yngvar; Fechter-Rink, Edeltraud

2009-01-01

A case study was carried out in 2006-2007 to assess the actual cement dust exposure among construction workers involved in a full-scale construction project and as a comparison among workers involved in various stages of cement and concrete production. Full-shift personal exposure measurements were performed for several job types. Inhalable dust and cement dust (based on analysis of elemental calcium) concentrations were determined. Inhalable dust exposures at the construction site ranged from 0.05 to 34 mg/m3, with a mean concentration of 1.0 mg/m3. For inhalable cement dust mean exposure was 0.3 mg/m3 (range 0.02-17 mg/m3). Reinforcement and pouring workers had the lowest average concentrations. Inhalable dust levels in the ready-mix and pre-cast concrete plants were, on average, below 0.5 mg/m3 for inhalable dust and below 0.2 mg/m3 for inhalable cement dust. Highest dust concentrations were measured in cement production, particularly during cleaning tasks (inhalable dust GM=55 mg/m3; inhalable cement dust GM=33 mg/m3) at which point the workers wore personal protective equipment. Elemental measurements showed highest but very variable cement percentages in the cement plant and very low percentages of cement during reinforcement work and pouring.

Insight into the construction of metal-organic polyhedra: Metal-organic cubes as a case study

KAUST Repository

Al Kordi, Mohamed; Belof, Jonathan L.; Rivera, Edwin R.; Wojtas, Łukasz; Eddaoudi, Mohamed

2011-01-01

Systematic studies were conducted to gain a better understanding of the metal-organic cubes (MOCs) directed assembly and their crystallization under predetermined reaction conditions, i.e. charge and size of metal ions, solvent type, counter anions, pH, and temperature. Four novel metal-organic materials are constructed via solvothermal reactions of different metal ions and 2,2′-(1H-imidazole-4,5-diyl)di-1,4,5,6-tetrahydropyrimidine, namely [Co8(C11N6H15)12]Cl 12·4H2O (1), [Ni4(C11N 6H15)4](NO3)4· 4DMF (2), {Cd(C11N6H15)(NO3) ·DMF}n (3), and [In8(C11N 6H15)12](NO3)12· 4H2O (4). In addition, syntheses and crystal structures for compounds 1(a-f), constructed under deliberately modified reaction conditions of 1, are reported. In compounds 1(a-f), the CoIII-based cationic MOCs crystallize in various packing arrangements in the presence of different counter-ions. Discrete MOCs retain their structural integrity, when crystalline solid was dissolved in water, under various pH (2.03-8.07) and temperatures (298-333 K), as confirmed by solution NMR studies. The assembly of the discrete MOC, from its basic molecular building blocks under mild reaction conditions, is demonstrated and monitored through solution NMR and UV-vis studies. © The Royal Society of Chemistry 2011.

Auto MOC-A 2D neutron transport code for arbitrary geometry based on the method of characteristics and customization of AutoCAD

International Nuclear Information System (INIS)

Chen Qichang; Wu Hongchun; Cao Liangzhi

2008-01-01

A new 2D neutron transport code AutoMOC for arbitrary geometry has been developed. This code is based on the method of characteristics (MOCs) and the customization of AutoCAD. The MOC solves the neutron transport equation along characteristic lines. It is independent of the geometric shape of boundaries and regions. So theoretically, this method can be used to solve the neutron transport equation in highly complex geometries. However, it is important to describe the geometry and calculate intersection points of each characteristic line with every boundary and region in advance. In complex geometries, due to the complications of treating the arbitrary domain, the selection of geometric shapes and efficiency of ray tracing are generally limited. The geometry treatment through the customization of AutoCAD, a widely used computer-aided design software package, is given in this paper. Thanks to the powerful capability of AutoCAD, the description of arbitrary geometry becomes quite convenient. Moreover, with the language Visual Basic for Applications (VBAs), AutoCAD can be customized to carry out the ray tracing procedure with a high flexibility in geometry. The numerical results show that AutoMOC can solve 2D neutron transport problems in a complex geometry accurately and effectively

Auto MOC-A 2D neutron transport code for arbitrary geometry based on the method of characteristics and customization of AutoCAD

Energy Technology Data Exchange (ETDEWEB)

Chen Qichang; Wu Hongchun [School of Nuclear Science and Technology, Xi' an Jiaotong University, Xi' an Shaanxi 710049 (China); Cao Liangzhi [School of Nuclear Science and Technology, Xi' an Jiaotong University, Xi' an Shaanxi 710049 (China)], E-mail: caolz@mail.xjtu.edu.cn

2008-10-15

A new 2D neutron transport code AutoMOC for arbitrary geometry has been developed. This code is based on the method of characteristics (MOCs) and the customization of AutoCAD. The MOC solves the neutron transport equation along characteristic lines. It is independent of the geometric shape of boundaries and regions. So theoretically, this method can be used to solve the neutron transport equation in highly complex geometries. However, it is important to describe the geometry and calculate intersection points of each characteristic line with every boundary and region in advance. In complex geometries, due to the complications of treating the arbitrary domain, the selection of geometric shapes and efficiency of ray tracing are generally limited. The geometry treatment through the customization of AutoCAD, a widely used computer-aided design software package, is given in this paper. Thanks to the powerful capability of AutoCAD, the description of arbitrary geometry becomes quite convenient. Moreover, with the language Visual Basic for Applications (VBAs), AutoCAD can be customized to carry out the ray tracing procedure with a high flexibility in geometry. The numerical results show that AutoMOC can solve 2D neutron transport problems in a complex geometry accurately and effectively.

Mercury Exposure in a Riverside Amazon Population, Brazil: A Study of the Ototoxicity of Methylmercury

Directory of Open Access Journals (Sweden)

Hoshino, Ana

2015-02-01

Full Text Available Introduction Mercury poisoning causes hearing loss in humans and animals. Acute and long-term exposures produce irreversible peripheral and central auditory system damage, and mercury in its various forms of presentation in the environment is ototoxic. Objective We investigated the otoacoustic emissions responses in a riverside population exposed to environmental mercury by analyzing the inhibitory effect of the medial olivocochlear system (MOCS on transient otoacoustic emissions (TEOAE. Methods The purpose of the research was to evaluate the entire community independently of variables of sex and age. All of the participants were born and lived in a riverside community. After otolaryngologic evaluation, participants were received tympanometry, evaluation of contralateral acoustic reflexes, pure tone audiometry, and recording of TEOAEs with nonlinear click stimulation. Hair samples were collect to measure mercury levels. Results There was no significant correlation between the inhibitory effect of the MOCS, age, and the level of mercury in the hair. Conclusions The pathophysiological effects of chronic exposure may be subtle and nonspecific and can have a long period of latency; therefore, it will be important to monitor the effects of mercury exposure in the central auditory system of the Amazon population over time. Longitudinal studies should be performed to determine whether the inhibitory effect of the MOCS on otoacoustic emissions can be an evaluation method and diagnostic tool in populations exposed to mercury.

Cement dust exposure-related emphysema in a construction worker

Directory of Open Access Journals (Sweden)

V Karkhanis

2011-01-01

Full Text Available Although, smoking is considered the most important predisposing factor in development of emphysema; environmental exposures also play an important role. There have been several studies on work related respiratory symptoms and ventilatory disorders among employees of cement industry. We report a case of cement exposure related emphysema in 75 years old woman construction worker.

MO-F-16A-03: AAPM Online Learning Support of New ABR MOC Requirements

International Nuclear Information System (INIS)

Bloch, C; Ogburn, J; Woodward, M

2014-01-01

In 2002 the American Board of Radiology (ABR) discontinued issuing lifetime board certification. After that time diplomates received a timelimited certificate and must participate in the Maintenance of Certification (MOC) program in order to maintain their certification. Initially certificates were issued with a 10 year expiration period and the MOC had requirements to be met over that 10 year period. The goal was to demonstrate continuous maintenance of clinical competency, however some diplomates were attempting to fulfill most or all of the requirements near the end of the 10 year period. This failed to meet the continuous aspect of the goal and so the ABR changed to a sliding 3-year window. This was done to recognize that not every year would be the same, but that diplomates should be able to maintain a reasonable average over any 3 year period.A second significant change occurred in 2013. The initial requirements included 20 selfassessment modules (SAMs) over the original 10 year term. SAMs are a special type of continuing education (CE) credit that were an addition to the 250 standard CE credits required over the 10 year period. In 2013, however, the new requirement is 75 CE credits over the previous 3 years, of which 25 must include self-assessment. Effectively this raised the self-assessment requirement from 20 in 10 years to 25 in 3 years. Previously SAMs were an interactive presentation available in limited quantities at live meetings. However, the new requirement is not for SAMs but CE-SA which includes SAMs, but also includes the online quizzes provided at the AAPM online learning center. All credits earned at the AAPM online learning center fulfill the ABR SA requirement.This talk will be an interactive demonstration of the AAPM online learning center along with a discussion of the MOC requirements

Problems related to design and construction of industrial radiography exposure room - an experience

International Nuclear Information System (INIS)

Siti Madiha Muhammad Amir; Mohd Khairi Mohd Said; Abdul Nassir Ibrahim; Ab Razak Hamzah

2009-01-01

In Non-Destructive Testing (NDT), especially in radiography method, inspections of components are executed either on-site or in-house. For in-house inspections, work must be performed in a specially constructed exposure room. The design of the exposure room must be according to specific requirements described in various documents related to radiation safety. Stringent requirements specified for the exposure room is for the purpose of ensuring the safety of public and radiation workers. These requirements are never compromised. One of the AELB requirements that need to be complied is that the permissible dose limit anywhere outside the room must be less than 0.25 mR/hr. In designing and constructing the exposure room, many factors must be taken into account such as shielding thickness, density of shielding, thickness of lead door, the roof design of the exposure room and many more. This paper highlights problems encountered and the considerations taken to design and construct the exposure room so that the exposure room will comply with the permissible dose limit set by the regulatory body. (Author)

Construction of pilot system for the Korea information system of occupational exposure

International Nuclear Information System (INIS)

Na, Seong Ho; Park, Moon Il; Im, Bok Soo; Lee, Seon Mi; Kim, Hyung Uk; Chae, Eun Yeong

2003-01-01

In this study, the construction of Korea Information System of Occupational Exposure (KISOE) system is designed with occupational exposure control system based on information evaluation technology and it makes the reliability of the personal exposure by use of personal dose verification. While the operation of national based radiation worker protection system, this system are settled the control system for radiation worker and ALARA. The purpose of construction and operation of pilot system of KISOE systematically is to derive the master plan of KISOE, stable development of this system, and serve the high quality radiation use internationally

Construction of pilot system for the Korea information system of occupational exposure

Energy Technology Data Exchange (ETDEWEB)

Na, Seong Ho [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Park, Moon Il; Im, Bok Soo; Lee, Seon Mi; Kim, Hyung Uk; Chae, Eun Yeong [ADDLAB Co., Ltd., Taejon (Korea, Republic of)

2003-01-15

In this study, the construction of Korea Information System of Occupational Exposure (KISOE) system is designed with occupational exposure control system based on information evaluation technology and it makes the reliability of the personal exposure by use of personal dose verification. While the operation of national based radiation worker protection system, this system are settled the control system for radiation worker and ALARA. The purpose of construction and operation of pilot system of KISOE systematically is to derive the master plan of KISOE, stable development of this system, and serve the high quality radiation use internationally.

Method of Characteristic (MOC) Nozzle Flowfield Solver - User’s Guide and Input Manual Version 2.0

Science.gov (United States)

2018-01-01

TECHNICAL REPORT RDMR-SS-17-13 METHOD OF CHARACTERISTIC (MOC) NOZZLE FLOWFIELD SOLVER—USER’S GUIDE AND INPUT MANUAL VERSION 2.0 Kevin D. Kennedy...1 II. PROGRAM READS AND WRITES ...2 B. Program Reads .................................................................................................. 4 C. Program Writes

The impact of asbestos exposure in Swedish construction workers.

Science.gov (United States)

Järvholm, Bengt; Englund, Anders

2014-01-01

To study the occurrence of pleural mesothelioma as a measure of the impact on health from asbestos exposure in the construction industry. The occurrence of pleural mesothelioma in different occupations, time periods and birth cohorts was studied in a cohort of construction workers. They were prospectively followed after they had participated in health examinations between 1971 and 1993. The analysis was restricted to men and in total 367,568 men was included in the analysis. In total there were 419 cases of pleural mesotheliomas between 1972 and 2009. As expected the age adjusted incidence was high in insulation workers and plumbers (39 and 16 cases per 100,000 person-years, respectively). However, only 21% of the pleural mesotheliomas occurred in those occupational groups. Occupational groups with many cases of pleural mesothelioma were concrete workers (N = 56), wood workers (N = 55), painters (N = 32), electricians (N = 48), and foremen (N = 37). The highest risk was in birth cohorts born between 1935 and 1945. Between 1995 and 2009 around one-third of all male cases in the country occurred in this birth cohort. The risk seemed to decrease considerably in men born after 1955. In Sweden a considerable proportion of pleural mesotheliomas occur among construction workers; and not only in jobs traditionally associated with asbestos exposure such as insulators and plumbers but also among electricians, for example. The results shows that asbestos exposure occurs in many occupational groups, indicating that safe handling of asbestos is a very difficult or even impossible task in the construction industry. © 2013 Wiley Periodicals, Inc.

Neutron transport study based on assembly modular ray tracing MOC method

International Nuclear Information System (INIS)

Tian Chao; Zheng Youqi; Li Yunzhao; Li Shuo; Chai Xiaoming

2015-01-01

It is difficulty for the MOC method based on Cell Modular Ray Tracing to deal with the irregular geometry such as the water gap between the PWR lattices. Hence, the neutron transport code NECP-Medlar based on Assembly Modular Ray Tracing is developed. CMFD method is used to accelerate the transport calculation. The numerical results of the 2D C5G7 benchmark and typical PWR lattice prove that NECP-Medlar has an excellent performance in terms of accuracy and efficiency. Besides, NECP-Medlar can describe clearly the flux distribution of the lattice with water gap. (authors)

Current man-made mineral fibers (MMMF) exposures among ontario construction workers.

Science.gov (United States)

Verma, Dave K; Sahai, Dru; Kurtz, Lawrence A; Finkelstein, Murray M

2004-05-01

Current occupational exposures to man-made mineral fibers (MMMF), including refractory ceramic fibers (RCF), were measured as part of an exposure assessment program for an epidemiological study pertaining to cancer and mortality patterns of Ontario construction workers. The assessments were carried out at commercial and residential sites. A total of 130 MMMF samples (104 personal and 26 area) was collected and included 21 RCF (16 personal and 5 area). The samples were analyzed by the World Health Organization method in which both respirable and nonrespirable airborne fibers are counted. The results show that Ontario construction workers' full-shift exposure to MMMF (excluding RCF) is generally lower than the American Conference of Governmental Industrial Hygienists' (ACGIH) recommended threshold limit value-time-weighted average (TLV-TWA) of 1 fibers/cc and thus should not present any significant hazard. However, approximately 40% of the occupational exposures to RCF are higher than ACGIH's TLV-TWA of 0.2 fibers/cc and present a significant potential hazard. Workers generally wore adequate approved respiratory protection, especially while performing particularly dusty tasks such as blowing, spraying, and cutting, so the actual exposure received by workers was lower than the reported values. Adequate control measures such as ventilation and respiratory protection should always be used when work involves RCF.

Proteus-MOC: A 3D deterministic solver incorporating 2D method of characteristics

International Nuclear Information System (INIS)

Marin-Lafleche, A.; Smith, M. A.; Lee, C.

2013-01-01

A new transport solution methodology was developed by combining the two-dimensional method of characteristics with the discontinuous Galerkin method for the treatment of the axial variable. The method, which can be applied to arbitrary extruded geometries, was implemented in PROTEUS-MOC and includes parallelization in group, angle, plane, and space using a top level GMRES linear algebra solver. Verification tests were performed to show accuracy and stability of the method with the increased number of angular directions and mesh elements. Good scalability with parallelism in angle and axial planes is displayed. (authors)

Proteus-MOC: A 3D deterministic solver incorporating 2D method of characteristics

Energy Technology Data Exchange (ETDEWEB)

Marin-Lafleche, A.; Smith, M. A.; Lee, C. [Argonne National Laboratory, 9700 S. Cass Avenue, Lemont, IL 60439 (United States)

2013-07-01

A new transport solution methodology was developed by combining the two-dimensional method of characteristics with the discontinuous Galerkin method for the treatment of the axial variable. The method, which can be applied to arbitrary extruded geometries, was implemented in PROTEUS-MOC and includes parallelization in group, angle, plane, and space using a top level GMRES linear algebra solver. Verification tests were performed to show accuracy and stability of the method with the increased number of angular directions and mesh elements. Good scalability with parallelism in angle and axial planes is displayed. (authors)

A task-based parallelism and vectorized approach to 3D Method of Characteristics (MOC) reactor simulation for high performance computing architectures

Science.gov (United States)

Tramm, John R.; Gunow, Geoffrey; He, Tim; Smith, Kord S.; Forget, Benoit; Siegel, Andrew R.

2016-05-01

In this study we present and analyze a formulation of the 3D Method of Characteristics (MOC) technique applied to the simulation of full core nuclear reactors. Key features of the algorithm include a task-based parallelism model that allows independent MOC tracks to be assigned to threads dynamically, ensuring load balancing, and a wide vectorizable inner loop that takes advantage of modern SIMD computer architectures. The algorithm is implemented in a set of highly optimized proxy applications in order to investigate its performance characteristics on CPU, GPU, and Intel Xeon Phi architectures. Speed, power, and hardware cost efficiencies are compared. Additionally, performance bottlenecks are identified for each architecture in order to determine the prospects for continued scalability of the algorithm on next generation HPC architectures.

[Occupational risk related to optical radiation exposure in construction workers].

Science.gov (United States)

Gobba, F; Modenese, A

2012-01-01

Optical Radiation is a relevant occupational risk in construction workers, mainly as a consequence of the exposure to the ultraviolet (UV) component of solar radiation (SR). Available data show that UV occupational limits are frequently exceeded in these workers, resulting in an increased occupational risk of various acute and chronic effects, mainly to skin and to the eye. One of the foremost is the carcinogenic effect: SR is indeed included in Group 1 IARC (carcinogenic to humans). UV exposure is related to an increase of the incidence of basal cell carcinoma, squamous cell carcinoma of the skin and cutaneous malignant melanoma (CMM). The incidence of these tumors, especially CMM, is constantly increasing in Caucasians in the last 50 years. As a conclusion, an adequate evaluation of the occupational risk related to SR, and adequate preventive measures are essential in construction workers. The role of occupational physicians in prevention is fundamental.

Monitoring of occupational exposure in manufacturing of stainless steel constructions

Czech Academy of Sciences Publication Activity Database

Kučera, Jan; Bencko, V.; Pápayová, A.; Šaligová, D.; Tejral, J.; Borská, L.

2001-01-01

Roč. 9, - (2001), s. 171-175 ISSN 1210-7778 R&D Projects: GA ČR GV202/97/K038 Institutional research plan: CEZ:AV0Z1048901 Keywords : occupational exposure * stainless steel construction industry * instrumental neutron activation analysis Subject RIV: FP - Other Medical Disciplines

Evaluation of the olivocochlear efferent reflex strength in the susceptibility to temporary hearing deterioration after music exposure in young adults

Directory of Open Access Journals (Sweden)

Keppler Hannah

2014-01-01

Full Text Available The objective of the current study was to evaluate the predictive role of the olivocochlear efferent reflex strength in temporary hearing deterioration in young adults exposed to music. This was based on the fact that a noise-protective role of the medial olivocochlear (MOC system was observed in animals and that efferent suppression (ES measured using contralateral acoustic stimulation (CAS of otoacoustic emissions (OAEs is capable of exploring the MOC system. Knowing an individual′s susceptibility to cochlear damage after noise exposure would enhance preventive strategies for noise-induced hearing loss. The hearing status of 28 young adults was evaluated using pure-tone audiometry, transient evoked OAEs (TEOAEs and distortion product OAEs (DPOAEs before and after listening to music using an MP3 player during 1 h at an individually determined loud listening level. CAS of TEOAEs was measured before music exposure to determine the amount of ES. Regression analysis showed a distinctive positive correlation between temporary hearing deterioration and the preferred gain setting of the MP3 player. However, no clear relationship between temporary hearing deterioration and the amount of ES was found. In conclusion, clinical measurement of ES, using CAS of TEOAEs, is not correlated with the amount of temporary hearing deterioration after 1 h music exposure in young adults. However, it is possible that the temporary hearing deterioration in the current study was insufficient to activate the MOC system. More research regarding ES might provide more insight in the olivocochlear efferent pathways and their role in auditory functioning.

A 2D/1D coupling neutron transport method based on the matrix MOC and NEM methods

International Nuclear Information System (INIS)

Zhang, H.; Zheng, Y.; Wu, H.; Cao, L.

2013-01-01

A new 2D/1D coupling method based on the matrix MOC method (MMOC) and nodal expansion method (NEM) is proposed for solving the three-dimensional heterogeneous neutron transport problem. The MMOC method, used for radial two-dimensional calculation, constructs a response matrix between source and flux with only one sweep and then solves the linear system by using the restarted GMRES algorithm instead of the traditional trajectory sweeping process during within-group iteration for angular flux update. Long characteristics are generated by using the customization of commercial software AutoCAD. A one-dimensional diffusion calculation is carried out in the axial direction by employing the NEM method. The 2D and ID solutions are coupled through the transverse leakage items. The 3D CMFD method is used to ensure the global neutron balance and adjust the different convergence properties of the radial and axial solvers. A computational code is developed based on these theories. Two benchmarks are calculated to verify the coupling method and the code. It is observed that the corresponding numerical results agree well with references, which indicates that the new method is capable of solving the 3D heterogeneous neutron transport problem directly. (authors)

A 2D/1D coupling neutron transport method based on the matrix MOC and NEM methods

Energy Technology Data Exchange (ETDEWEB)

Zhang, H.; Zheng, Y.; Wu, H.; Cao, L. [School of Nuclear Science and Technology, Xi' an Jiaotong University, No. 28, Xianning West Road, Xi' an, Shaanxi 710049 (China)

2013-07-01

A new 2D/1D coupling method based on the matrix MOC method (MMOC) and nodal expansion method (NEM) is proposed for solving the three-dimensional heterogeneous neutron transport problem. The MMOC method, used for radial two-dimensional calculation, constructs a response matrix between source and flux with only one sweep and then solves the linear system by using the restarted GMRES algorithm instead of the traditional trajectory sweeping process during within-group iteration for angular flux update. Long characteristics are generated by using the customization of commercial software AutoCAD. A one-dimensional diffusion calculation is carried out in the axial direction by employing the NEM method. The 2D and ID solutions are coupled through the transverse leakage items. The 3D CMFD method is used to ensure the global neutron balance and adjust the different convergence properties of the radial and axial solvers. A computational code is developed based on these theories. Two benchmarks are calculated to verify the coupling method and the code. It is observed that the corresponding numerical results agree well with references, which indicates that the new method is capable of solving the 3D heterogeneous neutron transport problem directly. (authors)

A Bioinformatics Analysis Reveals a Group of MocR Bacterial Transcriptional Regulators Linked to a Family of Genes Coding for Membrane Proteins

Directory of Open Access Journals (Sweden)

Teresa Milano

2016-01-01

Full Text Available The MocR bacterial transcriptional regulators are characterized by an N-terminal domain, 60 residues long on average, possessing the winged-helix-turn-helix (wHTH architecture responsible for DNA recognition and binding, linked to a large C-terminal domain (350 residues on average that is homologous to fold type-I pyridoxal 5′-phosphate (PLP dependent enzymes like aspartate aminotransferase (AAT. These regulators are involved in the expression of genes taking part in several metabolic pathways directly or indirectly connected to PLP chemistry, many of which are still uncharacterized. A bioinformatics analysis is here reported that studied the features of a distinct group of MocR regulators predicted to be functionally linked to a family of homologous genes coding for integral membrane proteins of unknown function. This group occurs mainly in the Actinobacteria and Gammaproteobacteria phyla. An analysis of the multiple sequence alignments of their wHTH and AAT domains suggested the presence of specificity-determining positions (SDPs. Mapping of SDPs onto a homology model of the AAT domain hinted at possible structural/functional roles in effector recognition. Likewise, SDPs in wHTH domain suggested the basis of specificity of Transcription Factor Binding Site recognition. The results reported represent a framework for rational design of experiments and for bioinformatics analysis of other MocR subgroups.

Modelling copper solvent extraction from acidic sulphate solutions using MOC 45

Directory of Open Access Journals (Sweden)

Alguacil, F. J.

1998-05-01

Full Text Available A mathematical model to predict the extraction has been developed for the Cu-MOC 45 system. The model consists of sets of nonlinear mass action and mass balance equations where the dimerization of the oxime was also considered. The predictive model calculated the equilibrium concentrations from the total oxime concentration, total copper concentration, initial pH value and the O/A volume phase ratio. The model suggests that the extraction of copper can be defined by the existence of two species into the organic solution: CuR₂ (k^ext = 4.2 and Cu(HR₂₂ (k^ext = 10.000- The initial oxime concentration defines the predominancy in the organic solution of both species. The model can be used to predict copper extraction isotherm as well as copper stripping with sulphuric acid.

Se desarrolla un modelo matemático para predecir el proceso de extracción en el sistema Cu-MOC 45. El modelo consiste en un conjunto de ecuaciones en el que se considera la dimerización de la oxima. El modelo permite predecir la extracción a partir de las concentraciones totales de la oxima y del cobre, del pH inicial y de la relación de fases O/A. La extracción de cobre responde a la existencia de dos especies en la fase orgánica: CuR₂ (k^ext = 4,2 y Cu(HR₂₂ (k^ext = 10.000. La predominancia de una u otra especie en esta fase depende de la concentración inicial de la oxima. El modelo también puede predecir las isotermas de extracción y la reextracción de cobre mediante ácido sulfúrico.

Literature review of levels and determinants of exposure to potential carcinogens and other agents in the road construction industry.

Science.gov (United States)

Burstyn, I; Kromhout, H; Boffetta, P

2000-01-01

Workers in the road construction industry include asphalt plant, ground construction, and road paving workers. These individuals can be exposed to a wide range of potentially hazardous substances. A summary of levels of exposure to different substances measured during road construction is presented. In modern road paving, workers typically are exposed to 0.1 to 2 mg/m3 of bitumen fume, which includes 10 to 200 ng/m3 of benzo(a)pyrene. Sampling strategies and analytical methods employed in each reviewed survey are described briefly. The published reports provide some insight into the identity of factors that influence exposure to bitumen among road construction workers: type of work performed, meteorological conditions, temperature of paved asphalt. However, there is a lack of (a) comprehensive and well-designed studies that evaluate determinants of exposure to bitumen in road construction, and (b) standard methods for bitumen sampling and analysis. Information on determinants of other exposures in road construction is either absent or limited. It is concluded that data available through published reports have limited value in assessing historical exposure levels in the road construction industry.

Does modern helicopter construction reduce noise exposure in helicopter rescue operations?

Science.gov (United States)

Küpper, Thomas; Jansing, Paul; Schöffl, Volker; van Der Giet, Simone

2013-01-01

During helicopter rescue operations the medical personnel are at high risk for hearing damage by noise exposure. There are two important factors to be taken into account: first, the extreme variability, with some days involving no exposure but other days with extreme exposure; second, the extreme noise levels during work outside the helicopter, e.g. during winch operations. The benefit of modern, less noisier constructions and the consequences for noise protection are still unknown. We estimated the noise exposure of the personnel for different helicopter types used during rescue operations in the Alps and in other regions of the world with special regard to the advanced types like Eurocopter EC 135 to compare the benefit of modern constructions for noise protection with earlier ones. The rescue operations over 1 year of four rescue bases in the Alps (Raron and Zermatt in Switzerland; Landeck and Innsbruck in Austria, n = 2731) were analyzed for duration of rescue operations (noise exposure). Noise levels were measured during rescue operations at defined points inside and outside the different aircraft. The setting is according to the European standard (Richtlinie 2003/10/EG Amtsblatt) and to Class 1 DIN/IEC 651. With both data sets the equivalent noise level L(eq8h) was calculated. For comparison it was assumed that all rescue operations were performed with a specific type of helicopter. Then model calculations for noise exposure by different helicopter types, such as Alouette IIIb, Alouette II 'Lama', Ecureuil AS350, Bell UH1D, Eurocopter EC135, and others were performed. Depending on modern technologies the situation for the personnel has been improved significantly. Nevertheless noise prevention, which includes noise intermissions in spare time, is essential. Medical checks of the crews by occupational medicine (e.g. 'G20' in Germany) are still mandatory.

Mitigating check valve slamming and subsequentwater hammer events for PPFS using MOC

International Nuclear Information System (INIS)

Tian Wenxi; Su Guanghui; Wang Gaopeng; Qiu Suizheng; Xiao Zejun

2009-01-01

The method of characteristic (MOC) was adopted to analyze the check valve-induced water hammer behaviors for a Parallel Pumps Feedwater System (PPFS) during the alternate startup process. The motion of check valve disc was simulated using inertial valve model. Transient parameters including the pressure oscillation, local flow velocity and slamming of the check valve disc etc. have been obtained. The results showed that severe slamming between the valve disc and valve seat occurred during the alternate startup of parallel pumps. The induced maximum pressure vibration amplitude is up to 5.0 MPa. The scheme of appending a damping torque to slow down the check valve closing speed was also performed to mitigate of water hammer. It has been numerically approved to be an effective approach. (authors)

Mitigating check valve slamming and subsequentwater hammer events for PPFS using MOC

Institute of Scientific and Technical Information of China (English)

TIAN Wenxi; SU Guanghui; WANG Gaopeng; QIU Suizheng; XIAO Zejun

2009-01-01

The method of characteristic (MOC) was adopted to analyze the check valve-induced water hammer behaviors for a Parallel Pumps Feedwater System (PPFS) during the alternate startup process. The motion of check valve disc was simulated using inertial valve model. Transient parameters including the pressure oscillation, local flow velocity and slamming of the check valve disc etc. have been obtained. The results showed that severe slamming between the valve disc and valve seat occurred during the alternate startup of parallel pumps. The induced maximum pressure vibration amplitude is up to 5.0 MPa. The scheme of appending a damping torque to slow down the check valve closing speed was also performed to mitigate of water hammer. It has been numerically approved to be an effective approach.

Modeling of solvent extraction equilibrium of Cu(II from sulphuric Acid solution with MOC-55TD

Directory of Open Access Journals (Sweden)

Alguacil, F. J.

1999-06-01

Full Text Available The extraction of Cu(II from acidic sulphate aqueous solutions using the commercial MOC-55TD extractant is studied. A predictive model, which consists in a set of non-linear mass action and mass balance equations is proposed. The model was solved using a tailor-made equation-solving program. The extraction of copper can be described by the formation of CuR₂ species (log K_ext= 0.717 ± 0.03 in the organic phase. The copper equilibrium isotherm was also obtained at 20°C.

Se estudia la extracción de Cu(II de disoluciones acuosas acidas, en medio sulfato, mediante la oxima comercial MOC-55TD. Se propone un modelo para predecir la extracción del metal; este modelo consiste en una serie de ecuaciones no lineales de acción de masas y balance de masas. El modelo se resolvió empleando un programa de ordenador específicamente definido para este tipo de equilibrios. La extracción de cobre se describe por la formación de la especie CuR₂ (log K_ext= 0,717 ± 0,03 en la fase orgánica. Se ha obtenido la isoterma de extracción de cobre a 20 °C.

10-Year prospective study of noise exposure and hearing damage among construction workers.

Science.gov (United States)

Seixas, Noah S; Neitzel, Rick; Stover, Bert; Sheppard, Lianne; Feeney, Patrick; Mills, David; Kujawa, Sharon

2012-09-01

To characterise the effects of noise exposure, including intermittent and peaky exposure, on hearing damage as assessed by standard pure-tone thresholds and otoacoustic emissions, a longitudinal study was conducted on newly hired construction apprentices and controls over a 10-year period. Among the 456 subjects recruited at baseline, 316 had at least two (mean 4.6) examinations and were included in this analysis. Annual examinations included hearing threshold levels (HTLs) for air conducted pure tones and distortion product otoacoustic emission (DPOAE) amplitudes. Task-based occupational noise exposure levels and recreational exposures were estimated. Linear mixed models were fit for HTLs and DPOAEs at 3, 4 and 6 kHz in relation to time since baseline and average noise level since baseline, while controlling for hearing level at baseline and other risk factors. Estimated L(EQ) noise exposures were 87±3.6 dBA among the construction workers. Linear mixed modelling demonstrated significant exposure-related elevations in HTL of about 2-3 dB over a projected 10-year period at 3, 4 or 6 kHz for a 10 dB increase in exposure. The DPOAE models (using L1=40) predicted about 1 dB decrease in emission amplitude over 10 years for a 10 dB increase in exposure. The study provides evidence of noise-induced damage at an average exposure level around the 85 dBA level. The predicted change in HTLs was somewhat higher than would be predicted by standard hearing loss models, after accounting for hearing loss at baseline. Limited evidence for an enhanced effect of high peak component noise was observed, and DPOAEs, although similarly affected, showed no advantage over standard hearing threshold evaluation in detecting effects of noise on the ear and hearing.

10-Year prospective study of noise exposure and hearing damage among construction workers

Science.gov (United States)

Seixas, Noah S; Neitzel, Rick; Stover, Bert; Sheppard, Lianne; Feeney, Patrick; Mills, David; Kujawa, Sharon

2015-01-01

Objectives To characterise the effects of noise exposure, including intermittent and peaky exposure, on hearing damage as assessed by standard pure-tone thresholds and otoacoustic emissions, a longitudinal study was conducted on newly hired construction apprentices and controls over a 10-year period. Methods Among the 456 subjects recruited at baseline, 316 had at least two (mean 4.6) examinations and were included in this analysis. Annual examinations included hearing threshold levels (HTLs) for air conducted pure tones and distortion product otoacoustic emission (DPOAE) amplitudes. Task-based occupational noise exposure levels and recreational exposures were estimated. Linear mixed models were fit for HTLs and DPOAEs at 3, 4 and 6 kHz in relation to time since baseline and average noise level since baseline, while controlling for hearing level at baseline and other risk factors. Results Estimated LEQ noise exposures were 87±3.6 dBA among the construction workers. Linear mixed modelling demonstrated significant exposure-related elevations in HTL of about 2–3 dB over a projected 10-year period at 3, 4 or 6 kHz for a 10 dB increase in exposure. The DPOAE models (using L1=40) predicted about 1 dB decrease in emission amplitude over 10 years for a 10 dB increase in exposure. Conclusions The study provides evidence of noise-induced damage at an average exposure level around the 85 dBA level. The predicted change in HTLs was somewhat higher than would be predicted by standard hearing loss models, after accounting for hearing loss at baseline. Limited evidence for an enhanced effect of high peak component noise was observed, and DPOAEs, although similarly affected, showed no advantage over standard hearing threshold evaluation in detecting effects of noise on the ear and hearing. PMID:22693267

Cumulative exposure to dust and gases as determinants of lung function decline in tunnel construction workers.

Science.gov (United States)

Bakke, B; Ulvestad, B; Stewart, P; Eduard, W

2004-03-01

To study the relation between lung function decrease and cumulative exposure to dust and gases in tunnel construction workers. A total of 651 male construction workers (drill and blast workers, tunnel concrete workers, shotcreting operators, and tunnel boring machine workers) were followed up by spirometric measurements in 1989-2002 for an average of six years. Outdoor concrete workers, foremen, and engineers served as a low exposed referent population. The between worker component of variability was considerably reduced within the job groups compared to the whole population, suggesting that the workers within job groups had similar exposure levels. The annual decrease in FEV1 in low-exposed non-smoking workers was 21 ml and 24 ml in low-exposed ever smokers. The annual decrease in FEV1 in tunnel construction workers was 20-31 ml higher than the low exposed workers depending on job group for both non-smokers and ever smokers. After adjustment for age and observation time, cumulative exposure to nitrogen dioxide showed the strongest association with a decrease in FEV1 in both non-smokers, and ever smokers. Cumulative exposure to nitrogen dioxide appeared to be a major risk factor for lung function decreases in these tunnel construction workers, although other agents may have contributed to the observed effect. Contact with blasting fumes should be avoided, diesel exhaust emissions should be reduced, and respiratory devices should be used to protect workers against dust and nitrogen dioxide exposure.

Young worker safety in construction: do family ties and workgroup size affect hazard exposures and safety practices?

Science.gov (United States)

Rauscher, Kimberly J; Myers, Douglas J; Runyan, Carol W; Schulman, Michael

2012-01-01

Little is known about how social aspects of the work environment influence exposures or safety practices affecting young construction workers. Our objective was to investigate whether working on a construction site with a small number of workers (≤10 vs. 11-50) or having a family-firm connection (working in a family-owned firm or one in which a family member also works) impacts hazard exposures and safety practices. Participants included 187 North Carolina construction workers 14 to 17 years old who were surveyed about their jobs. We conducted stratified analyses using cross-tabulations and chi-square statistics to measure associations between workgroup size (i.e., the total number of workers on a jobsite) and family-firm connections (yes/no) and hazard exposures (e.g., saws) and safety practices (e.g., supervision). Having a family-firm connection was associated with fewer hazard exposures and greater safety practices. Youth who worked on jobsites with a larger workgroup (11-50 workers) reported more hazards but also more safety practices. Family-firm connections, in particular, may have a protective effect for youth in construction. Even though the statistical significance of our findings on workgroup size was limited in places, the pattern of differences found suggest that further research in this area is warranted.

Construction of an indicator of exposure to RF fields in urban environment

International Nuclear Information System (INIS)

Guidetto, T.; Bongio, E.; Gasparino, U.

2002-01-01

The aim of a specific task of the CTN-AGF (Centro Tematico Nazionale Agenti Fisici) was the construction of an environmental indicator for the exposure to electromagnetic fields produced by Radio Frequency sources (Base Transceiver Station particularly) in urban environment. The proposed indicator is descriptive and, in the DPSIR framework, is placed among the state indicators. The steps necessary to evaluate the indicator are: - theoretical computation of the electromagnetic field strength; - analysis of the spatial distribution of the potentially exposed population; - topological overlay of the geo referred constructed data

Structural equation modelling of lower back pain due to whole-body vibration exposure in the construction industry.

Science.gov (United States)

Vitharana, Vitharanage Hashini Paramitha; Chinda, Thanwadee

2017-09-21

Whole-body vibration (WBV) exposure is a health hazard among workers, causing lower back pain (LBP) in the construction industry. This study examines key factors affecting LBP due to WBV exposure using exploratory factor analysis and structural equation modelling. The results confirm five key factors (equipment, job related, organizational, personal, social context) with their 17 associated items. The organizational factor is found the most important, as it influences the other four factors. The results also show that appropriate seat type, specific training programme, job rotation, workers' satisfaction and workers' physical condition are crucial in reducing LBP due to WBV exposure. Moreover, provision of new machines without proper training and good working condition might not help reduce LBP due to WBV exposure. The results help the construction companies to better understand key factors affecting LBP due to WBV exposure, and to plan for a better health improvement programme.

Assessment of natural radiation exposure inside a newly constructed building

International Nuclear Information System (INIS)

Shukla, V.K.; Sadasivan, S.; Nambi, K.S.V.; Sundaram, V.K.

1994-01-01

Naturally occurring radionuclides in building materials are one of the sources of radiation exposure to the population. Several building materials used for a newly constructed building complex were analysed for 40 K, 238 U radioactivity by gamma ray spectrometry. The external gamma dose inside the complex was evaluated by using the computer code QAD-CGGP. External dose rate was also measured by using scintillation gamma monitor. Calculated and the measured dose rate values are discussed. (author). 11 refs., 2 figs., 2 tabs

The Use of Noise Dampening Mats to Reduce Heavy-Equipment Noise Exposures in Construction

Directory of Open Access Journals (Sweden)

Sabah Saleh

2017-06-01

Full Text Available The performance of sound barriers was evaluated to determine their technical effectiveness and practicality in reducing noise exposures to operating engineers in construction. Commercially purchased sound dampening mats (SDMats were installed inside three heavy-equipment engine compartments. Sound pressure levels (SPLs were measured before and after installing the SDMats while the equipment was on idle and full-throttle settings where it normally operates. SPLs inside the heavy-equipment operator cabs were significantly reduced by 5.6–7.6 dBA on the full-throttle setting following installation of the SDMats (p<0.01. The evaluated engineering control intervention was simple to install, affordable, and substantially reduced the engine noise reaching the heavy-equipment operator, potentially reducing reliance on hearing-protection devices to protect construction workers from noise exposures.

Assessment of gamma radiation exposure inside a newly constructed building and a proposed regulatory guideline for exposure control from natural radioactivity in future buildings

International Nuclear Information System (INIS)

Shukla, V.K.; Sadasivan, S.; Sundaram, V.K.; Nambi, K.S.V.

1995-01-01

Naturally occurring radionuclides in building materials are one of the sources of radiation exposure of the population. The various materials used for constructing a new building were assessed for 40 K, 232 Th and 238 U radioactivity and the external gamma dose rate inside the building was predicted by using the computer code QAD-CGGP. The external dose rate was also measured by a scintillation gamma monitor after the construction of the building. In the building studied, the floor and the ceilings are seen to contribute about 35% each of the total radiation dose inside the building from the natural radioactivity present in the construction materials and the underlying soil; the walls contributed about 15%. A sensitivity analysis assuming extreme conditions of radioactivity concentrations as are normally observed in the Indian context, indicates the possibility of indoor gamma radiation fields varying by two orders of magnitude. The possible control methodologies and recommendations are also discussed for keeping the population exposure as low as reasonable achievable. It is evaluated that radioactivity limits of 370 Bq.kg -1 of radium equivalent and 85 Bq.kg -1 of 226 Ra when applied concurrently, might limit the indoor exposure to reasonably accepted low levels of health risks. (author)

Relieved Working study: systematic development and design of an intervention to decrease occupational quartz exposure at construction worksites

NARCIS (Netherlands)

Oude Hengel, K.M.; Deurssen, E. van; Meijster, T.; Tielemans, E.; Heederik, D.; Pronk, A.

2014-01-01

Background: Occupational quartz exposure continues to be a serious hazard in the construction industry. Until now, evidence-based interventions aimed at reducing quartz exposure are scarce. The aim of this study was to systematically develop an intervention and to describe the study to evaluate its

Physical Exposures, Work Tasks, and OSHA-10 Training Among Temporary and Payroll Construction Workers.

Science.gov (United States)

Caban-Martinez, Alberto J; Santiago, Katerina M; Stillman, Jordan; Moore, Kevin J; Sierra, Danielle A; Chalmers, Juanita; Baniak, Melissa; Jordan, Melissa M

2018-04-01

We characterize and compare the self-reported physical exposures, work tasks, and OSHA-10 training in a non-probabilistic sample of temporary and payroll construction workers. In June 2016, a total of 250 payroll and temporary general laborers employed at Florida construction sites completed a survey at the job site as part of the falls reported among minority employees (FRAME) study. Workers employed through temp agencies (57.1%) were significantly more likely to report moving or lifting materials more than 100 pounds than payroll workers (38.5%; P < 0.01). Temporary construction workers with 10-hour OSHA training (22.2%) spent significantly less time with intense hand use/awkward hand posture than temporary workers without 10-hour OSHA training (46.9%; P = 0.048). Temp construction workers with OSHA 10-hour training reported less hazardous physical postures than workers without the same training.

The effect of the OSHA lead exposure in construction standard on blood lead levels among iron workers employed in bridge rehabilitation.

Science.gov (United States)

Levin, S M; Goldberg, M; Doucette, J T

1997-03-01

Over 50,000 workers are at risk of occupational exposure to lead in the course of renovating the nation's deteriorating infrastructure. In mid-1993, to control exposure to lead in the construction setting OSHA promulgated a Lead in Construction Standard. In this study, we assessed the effect of the mandated changes in exposure conditions which followed the introduction of this new standard. We analyzed changes in baseline and maximum blood lead concentrations and in maximum increments in blood lead levels before and after introduction of the standard among iron workers employed in the renovation of a large, lead-painted, steel bridge in New York City. Results indicated that baseline and maximum blood lead levels fell significantly after the implementation of the provisions of the standard, as did maximum increments in blood lead concentrations. Seventy-six percent of the workers maintained blood lead concentrations below 20 micrograms/dl after the OSHA standard, as compared with 66% prior to its implementation. Increments of 20 micrograms/dl or more occurred considerably more frequently before introduction of the standard (13% before vs. 4% after; p = 0.01). Evidence of decreased exposure to lead was observed among iron workers who were present both before and after the introduction of the OSHA standard, as well as among iron workers newly hired after the OSHA provisions were put in place. These findings document the effectiveness of the OSHA construction lead standard in controlling exposure to lead in this complex and variable environment. The data indicate the utility of blood lead determinations in assessing the outcome of industrial hygiene interventions to reduce exposures to lead in the construction setting.

Radon exposure due to the use of phosphogypsum in civil construction

International Nuclear Information System (INIS)

Jacomino, Vanusa Maria F.; Brito, Walter de; Rocha, Zildete; Gomes, Abdias M.

2005-01-01

Different studies have showed the possibility of using phosphogypsum as calcium and sulphur sources in agriculture, as a soil conditioner that contains elevated levels of sodium, and as a substitute of natural gypsum in the production of cement bricks and road construction. Nevertheless due to the presence of natural radionuclide, this material can only be used after a detailed study has been carried out, which includes the evaluation of different factors as dose increment, cost of alternative materials, and improvement of life quality of the population and of the environment, among others. The main objective of this paper is to give subsides to the decision-makers for the regulation of phosphogypsum utilization as a substitute of natural gypsum in the civil construction industries of tropical countries. Initially, several analyses were performed in order to identify its mineral constituents, to determine its radioactivity concentration, and to evaluate which would be the best composition of phosphogypsum, sand, cement and water for blocks and bricks fabrication. Moreover, the rate of radon exhalation from different types of materials used in the civil construction area was also determined. The preliminary results showed that the use of phosphogypsum would not contribute for the exposure of public individuals to radiation dose above the regulated limits. (author)

Evaluation of public and worker exposure due to naturally occurring asbestos in gravel discovered during a road construction project.

Science.gov (United States)

Perkins, Robert A; Hargesheimer, John; Vaara, Leah

2008-09-01

During a repair and reconstruction project of an unpaved highway in a remote region of Alaska, workers discovered, after construction had commenced, that the materials used from a local material site contained asbestos (variously described as tremolite or actinolite). The regional geology indicated the presence of ultramafic rock, which often contains asbestos. Evaluation of asbestos exposure to workers, their equipment, and living quarters was required, as was the possible future exposure of workers and the general public to asbestos already used in the roadway construction. In addition, a decision was needed on whether to use materials from the contaminated site in the future. Of the almost 700 breathing zone air monitoring samples taken of the workers, 3% of the samples indicated exposures at or near 0.1 f/cc by the National Institute for Occupational Safety and Health (NIOSH) 7400 phase contrast microscopy (PCM) procedure. Thirty-six of the PCM samples underwent transmission electron microscopy (TEM) analysis by the NIOSH 7402 procedure, which indicated that about 40% of the fibers were asbestos. After classifying samples by tasks performed by workers, analysis indicated that workers, such as road grader operators who ground or spread materials, had the highest exposures. Also, monitoring results indicated motorist exposure to be much less than 0.1 f/cc. The design phase of any proposed construction project in regions that contain ultramafic rock must consider the possibility of amphibole contamination of roadway materials, and budget for exploration and asbestos analysis of likely materials sites.

Origem e distribuição do nervo femoral do mocó, Kerodon rupestris (Cavidae

Directory of Open Access Journals (Sweden)

Gleidson B Oliveira

2011-12-01

Full Text Available O mocó (Kerodon rupestris Wied,1820, um mamífero roedor da família Cavidae, que se assemelha bastante ao preá, é um animal altamente adaptado às condições de calor e de escassez de água e de alimento, principalmente nos períodos das grandes secas que assolam periodicamente a região do semi-árido nordestino. Verifiica-se que na literatura há escassez de dados referentes à anatomia funcional dos mocós, em especial de trabalhos envolvendo a anatomia do sistema nervoso. Visando conhecer a origem do nervo femoral junto aos forames intervertebrais, sua localização e distribuição pelo membro pélvico, a musculatura envolvida em seu trajeto, a importância desse estudo para clínica de animais silvestres e contribuir para o desenvolvimento da neuroanatomia comparada, procedeu-se esta pesquisa, na qual foram utilizados dez animais adultos de diferentes idades (4 machos e 6 fêmeas que vieram a óbito no Centro de Multiplicação de Animais Silvestres (Cemas da Universidade Federal Rural do Semi-Árido (Ufersa. Os animais foram fiixados em solução aquosa de formaldeído a 10% e posteriormente tiveram a cavidade abdominal dissecada até a completa visualização do nervo femoral. Foram verifiicadas variações no número de vértebras lombares nos animais, entre seis (30% e sete (70% vértebras, alterando, conseqüentemente, a origem do nervo. No antímero direito, verifiicou-se que em 40% dos animais o nervo femoral originava-se de ramos ventrais de L5L6, em 40% de L5L6L7 e em 20% de L4L5L6. Já no esquerdo 50% dos exemplares o nervo femoral foi formado de raízes ventrais de L5L6, em 30% de L5L6L7 e em 20% de L4L5L6.

Definition of metabolism-dependent xenobiotic toxicity with co-cultures of human hepatocytes and mouse 3T3 fibroblasts in the novel integrated discrete multiple organ co-culture (IdMOC) experimental system: results with model toxicants aflatoxin B1, cyclophosphamide and tamoxifen.

Science.gov (United States)

Li, Albert P; Uzgare, Aarti; LaForge, Yumiko S

2012-07-30

The integrated discrete multiple organ co-culture system (IdMOC) allows the co-culturing of multiple cell types as physically separated cells interconnected by a common overlying medium. We report here the application of IdMOC with two cell types: the metabolically competent primary human hepatocytes, and a metabolically incompetent cell line, mouse 3T3 fibroblasts, in the definition of the role of hepatic metabolism on the cytotoxicity of three model toxicants: cyclophosphamide (CPA), aflatoxin B1 (AFB) and tamoxifen (TMX). The presence of hepatic metabolism in IdMOC with human hepatocytes was demonstrated by the metabolism of the P450 isoform 3A4 substrate, luciferin-IPA. The three model toxicants showed three distinct patterns of cytotoxic profile: TMX was cytotoxic to 3T3 cells in the absence of hepatocytes, with slightly lower cytotoxicity towards both 3T3 cells and hepatocytes in the IdMOC. AFB was selective toxic towards the human hepatocytes and relatively noncytotoxic towards 3T3 cells both in the presence and absence of the hepatocytes. CPA cytotoxicity to the 3T3 cells was found to be significantly enhanced by the presence of the hepatocytes, with the cytotoxicity dependent of the number of hepatocytes, and with the cytotoxicity attenuated by the presence of a non-specific P450 inhibitor, 1-aminobenzotriazole. We propose here the following classification of toxicants based on the role of hepatic metabolism as defined by the human hepatocyte-3T3 cell IdMOC assay: type I: direct-acting cytotoxicants represented by TMX as indicated by cytotoxicity in 3T3 cells in the absence of hepatocytes; type II: metabolism-dependent cytotoxicity represented by AFB1 with effects localized within the site of metabolic activation (i. e. hepatocytes); and type III: metabolism-dependent cytotoxicity with metabolites that can diffuse out of the hepatocytes to cause toxicity in cells distal from the site of metabolism, as exemplified by CPA. Copyright © 2012 Elsevier Ireland

Construction of natural radiation exposure study network - overview and current status

International Nuclear Information System (INIS)

Tokonami, Shinji

2010-01-01

A new project entitled 'Construction of natural radiation exposure study network' was adopted in the Program of Promotion of International Joint Research under the Special Coordination Funds for Promoting Science and Technology operated by the Ministry of Education, Culture, Sports, Science and Technology of Japan. Eight institutions were involved in this project and the project will continue until March, 2012. The aims of the project are to assess the dose for natural radiation exposures using state-of- the-art measurement techniques in four Asian countries (China, India, Korea and Thailand) and their outcomes will be distributed worldwide. Throughout the project, conventional measurement techniques will be improved and be optimized. More scientific data and results will be obtained as well. In particular, the following advanced technologies for inhalation exposures will be introduced: (1) Discriminative measurements of radon ( 222 Rn) and thoron ( 220 Rn) gases, (2) Evaluation of thoron decay products concentration, (3) Simple but effective particle size distribution measurements. In China, we are conducting a case-control study of radon and lung cancer in Gansu, China. This Gansu area was investigated in the past for the case-control study. New data are being accumulated. In India, we focused on Orissa in order to carry out radiation measurements in this project. In parallel, Kerala is currently involved as the comparative study area. In Korea, we are now measuring radon and thoron in radon/thoron prone areas. These results will give us new information for further understanding of exposure due to radon and thoron. In Thailand, we are carrying out comprehensively radiation measurements in NORM industries. Not only these surveys but also quality assurance of radon measurements are being addressed in Japan. We have managed an international intercomparison exercise of passive radon detectors at NIRS. This study presents an overview of the project and current status

Effective information campaign for management of exposure to hand-arm vibration in the metal and construction industries.

Science.gov (United States)

Sauni, Riitta; Toivio, Pauliina; Esko, Toppila; Pääkkönen, Rauno; Uitti, Jukka

2015-01-01

European Directive 2002/44/EC defines employers' responsibilities in the risk management of hand-arm vibration (HAV). However, the directive is still not completely implemented in all risk industries. The aim of our study was to determine whether it is possible to improve the recognition and management of the risks of HAV at workplaces with a one-year information campaign. A questionnaire on opinions and measures for controlling HAV exposure at workplaces was sent to all occupational safety representatives and occupational safety managers in the construction and metal industry in Finland (n=1887) and once again to those who responded to the first questionnaire (n=961) one year after the campaign. The campaign increased recognition of HAV in risk assessment from 57.0% to 68.3% (p=.001), increased measures to decrease exposure to HAV from 54.6% to 64.2% (p=.006) and increased the number of programmes to control the risks due to HAV (p<.001). The information campaign, which focuses on the construction and metal industries, proved to be effective in increasing the awareness of the risks of HAV and the measures needed to control exposure to HAV. A similar campaign can be recommended in the case of risks specific to certain occupations.

Effect of corrosive marine atmosphere on construction materials in Tanzania: Exposure sites and preliminary results

International Nuclear Information System (INIS)

Mmari, A.G.; Uiso, C.B.S.; Makundi, I.N.; Potgieter-Vermaak, S.S.; Potgieter, J.H.; Van Grieken, R.

2007-01-01

Air pollution studies in Africa are limited and the influence of ambient air quality on buildings and constructions have not been investigated in the larger part of Sub-Saharan Africa. The increasing burden of emission from industry, traffic and coal power plants on ambient air pollution in Sub-Saharan Africa necessitated reviewing previous and current studies. In South Africa a 20-year exposure program, focusing on the effect of ambient exposure on various metals and alloys, showed that the amount of rainfall, relative humidity, atmospheric pollution, wind speed, solar radiation and structural design are some of the factors controlling atmospheric corrosion. Tanzania, being among the Sub-Saharan African countries and partly bordered by Indian ocean, the main source of marine atmosphere, experiences corrosive degradation on metal roofing and cementitious materials. This paper describes the exposure site set-up and will report on some preliminary results of air quality and its relation with the meteorological conditions, as well as surface changes observed, for the year one of exposure. These will thereafter be compared to the completed European and Asian studies, as reported by CLRTAP and RAPIDC respectively. (author)

Asbestos exposure among construction workers during demolition of old houses in Tehran, Iran.

Science.gov (United States)

Kakooei, Hossein; Normohammadi, Mohhammad

2014-01-01

Air quality in demolition practices has seldom been evaluated in Iran. Accordingly, we evaluated asbestos exposure among Tehran construction workers during the demolition of old houses. To identify possible sources of asbestos exposure, including thermal insulations, chimney pipes and cement sheets, were all sampled. This study also were taken the personal air samples to evaluate any asbestos exposure during the demolition. The asbestos fibers found in the samples were analyzed by phase-contrast optical microscopy (PCM), scanning electron microscopy (SEM) equipped with an energy dispersive X-ray analysis, and polarized light microscopy (PLM) methods. Personal monitoring of asbestos fiber levels indicated a range from 0.01 to 0.15 PCM f/ml (0.02-0.42 SEM f/ml). The geometric mean concentrations were 0.07 PCM f/ml (0.20 SEM f/ml), which is considerably higher than the threshold limit value (TLV) proposed by American Conference of Governmental Industrial Hygienist (ACGIH), which is 0.1 f/ml. The analysis showed a presence in the bulk samples only chrysotile asbestos and an absence of the other type asbestos. Therefore, it might be expected that workers who worked in the demolition of old houses will suffer from negative effects of exposing to the asbestos fibers.

Early-life exposure to caffeine affects the construction and activity of cortical networks in mice.

Science.gov (United States)

Fazeli, Walid; Zappettini, Stefania; Marguet, Stephan Lawrence; Grendel, Jasper; Esclapez, Monique; Bernard, Christophe; Isbrandt, Dirk

2017-09-01

The consumption of psychoactive drugs during pregnancy can have deleterious effects on newborns. It remains unclear whether early-life exposure to caffeine, the most widely consumed psychoactive substance, alters brain development. We hypothesized that maternal caffeine ingestion during pregnancy and the early postnatal period in mice affects the construction and activity of cortical networks in offspring. To test this hypothesis, we focused on primary visual cortex (V1) as a model neocortical region. In a study design mimicking the daily consumption of approximately three cups of coffee during pregnancy in humans, caffeine was added to the drinking water of female mice and their offspring were compared to control offspring. Caffeine altered the construction of GABAergic neuronal networks in V1, as reflected by a reduced number of somatostatin-containing GABA neurons at postnatal days 6-7, with the remaining ones showing poorly developed dendritic arbors. These findings were accompanied by increased synaptic activity in vitro and elevated network activity in vivo in V1. Similarly, in vivo hippocampal network activity was altered from the neonatal period until adulthood. Finally, caffeine-exposed offspring showed increased seizure susceptibility in a hyperthermia-induced seizure model. In summary, our results indicate detrimental effects of developmental caffeine exposure on mouse brain development. Copyright © 2017 Elsevier Inc. All rights reserved.

Hearing loss among older construction workers: Updated analyses.

Science.gov (United States)

Dement, John; Welch, Laura S; Ringen, Knut; Cranford, Kim; Quinn, Patricia

2018-04-01

A prior study of this construction worker population found significant noise-associated hearing loss. This follow-up study included a much larger study population and consideration of additional risk factors. Data included audiometry, clinical chemistry, personal history, and work history. Qualitative exposure metrics for noise and solvents were developed. Analyses compared construction workers to an internal reference group with lower exposures and an external worker population with low noise exposure. Among participants (n = 19 127) an overall prevalence of hearing loss of 58% was observed, with significantly increased prevalence across all construction trades. Construction workers had significantly increased risk of hearing loss compared to reference populations, with increasing risk by work duration. Noise exposure, solvent exposure, hypertension, and smoking were significant risk factors in multivariate models. Results support a causal relationship between construction trades work and hearing loss. Prevention should focus on reducing exposure to noise, solvents, and cigarette smoke. © 2018 Wiley Periodicals, Inc.

Caracterização morfológica dos dentes de mocó Kerodon rupestris: Mammalia: Rodentia

Directory of Open Access Journals (Sweden)

Juliana Montovani Thomaz

2006-10-01

Full Text Available O Kerodon rupestris, também conhecido como mocó, é um roedor herbívoro encontrado no Brasil. A dentição dos mamíferos apresenta-se variável de acordo com as espécies embora seja formada pelos mesmos componentes: esmalte, dentina, cemento e polpa. Neste estudo foram utilizadas sete cabeças de Kerodon rupestris, adultos, de ambos os sexos. Na cavidade oral do Kerodon rupestris, devido ao tamanho relativamente grande dos incisivos, estes se destacaram dos demais e foram encontrados um par em cada mandíbula. Dois pares de pré-molares e três pares de molares foram encontrados, sendo representados na fórmula 2x (I 1/1, C 0/0, P 1/1, M 3/3. Os molares apresentaram duas cúspides, conformação que conferia a estes dentes um aspecto serrilhado. Microscopicamente os dentes incisivos, pré-molares e molares foram classificados como hipsodontes, ou seja, dentes em constante erupção.

Prospective risk of rheumatologic disease associated with occupational exposure in a cohort of male construction workers.

Science.gov (United States)

Blanc, Paul D; Järvholm, Bengt; Torén, Kjell

2015-10-01

The association between occupational exposure and autoimmune disease is well recognized for silica, and suspected for other inhalants. We used a large cohort to estimate the risks of rheumatoid arthritis, systemic lupus erythematosus, systemic sclerosis, and dermatomyositis associated with silica and other occupational exposures. We analyzed data for male Swedish construction industry employees. Exposure was defined by a job-exposure matrix for silica and for other inorganic dusts; those with other job-exposure matrix exposures but not to either of the 2 inorganic dust categories were excluded. National hospital treatment data were linked for International Classification of Diseases, 10(th) Revision-coded diagnoses of rheumatoid arthritis (seronegative and positive), systemic lupus erythematosus, systemic sclerosis, and dermatomyositis. The 2 occupational exposures were tested as independent predictors of prospective hospital-based treatment for these diagnoses using age-adjusted Poisson multivariable regression analyses to calculate relative risk (RR). We analyzed hospital-based treatment data (1997 through 2010) for 240,983 men aged 30 to 84 years. There were 713 incident cases of rheumatoid arthritis (467 seropositive, 195 seronegative, 51 not classified) and 128 cases combined for systemic lupus erythematosus, systemic sclerosis, and dermatomyositis. Adjusted for smoking and age, the 2 occupational exposures (silica and other inorganic dusts) were each associated with increased risk of rheumatoid arthritis, systemic lupus erythematosus, systemic sclerosis, and dermatomyositis combined: RR 1.39 (95% confidence interval [CI], 1.17-1.64) and RR 1.31 (95% CI, 1.11-1.53), respectively. Among ever smokers, both silica and other inorganic dust exposure were associated with increased risk of rheumatoid arthritis (RRs 1.36; 95% CI, 1.11-1.68 and 1.42; 95% CI, 1.17-1.73, respectively), while among never smokers, neither exposure was associated with statistically

Evaluation of external exposure during building and operation of concrete bridges constructions that reuse the conditionally released steels - 59120

International Nuclear Information System (INIS)

Panik, Michal; Necas, Vladimir

2012-01-01

This paper presents ongoing results of the project presented at ICEM'10 [1] related to the topics of reusing the conditionally released materials from decommissioning. The subject of the reuse of conditionally released materials in this case is modeling of bridge constructions which reuse the conditionally released steel in the form of reinforcement bars for the concrete bridges. A general approach for the project was presented at ICEM'10. The activities of the project continue in evaluating the individual effective doses from the external exposure based on reused conditionally released steels separately for public and for professionals (the internal exposure will be evaluated in next stages of the project). Evaluated scenarios are related to critical groups of professionals constructing the bridges (worker's scenarios). The computer code VISIPLAN 3D ALARA 4.0 planning tool was used for the calculation of the individual effective dose for professionals. Various limits of the annual individual effective dose are used for the evaluation of calculation results. The aim of the ongoing modeling is to develop a set of data of maximal radioactivity concentration for individual radionuclides in the conditionally released steel used in the bridges model constructions in order not to exceed the limits for the individual effective dose. (authors)

Development of a consistent Monte Carlo-deterministic transport methodology based on the method of characteristics and MCNP5

International Nuclear Information System (INIS)

Karriem, Z.; Ivanov, K.; Zamonsky, O.

2011-01-01

This paper presents work that has been performed to develop an integrated Monte Carlo- Deterministic transport methodology in which the two methods make use of exactly the same general geometry and multigroup nuclear data. The envisioned application of this methodology is in reactor lattice physics methods development and shielding calculations. The methodology will be based on the Method of Long Characteristics (MOC) and the Monte Carlo N-Particle Transport code MCNP5. Important initial developments pertaining to ray tracing and the development of an MOC flux solver for the proposed methodology are described. Results showing the viability of the methodology are presented for two 2-D general geometry transport problems. The essential developments presented is the use of MCNP as geometry construction and ray tracing tool for the MOC, verification of the ray tracing indexing scheme that was developed to represent the MCNP geometry in the MOC and the verification of the prototype 2-D MOC flux solver. (author)

Assessment of exposure pathways connected with construction and operation of concrete bridge reinforced with very low level radioactive steel

International Nuclear Information System (INIS)

Panik, M.; Necas, V.

2012-01-01

Large amount of low level radioactive material arises during decommissioning of nuclear power plants. Material mostly comprises metal scrap and concrete ruble. Paper deals with recycling and reuse of metal scrap and its utilization as part of reinforcement of concrete bridges under the conditional release concept. Radiation exposure originating in very low level reinforcement steel consists of several exposure pathways. Short-term radiation impact is represented mostly by external exposure pathway and it is relevant to the construction workers and users of the bridge. Long-term radiation impacts on inhabitants living near finished bridge and it is divided into inhalation and ingestion of radionuclides-internal exposure pathways. Radiation impact caused by utilization of very low level radioactive waste was calculated using simulation software VISIPLAN 3D ALARA and GOLDSIM. Results of calculations provide fair summary of possibilities of utilization of conditionally released steel as reinforcement of concrete bridges. (Authors)

Growth and liver histology of Channa punctatus exposed to a common biofertilizer.

Science.gov (United States)

Nath, S; Matozzo, V; Bhandari, D; Faggio, C

2018-01-28

Mustard oil cake (MOC) is widely used as biofertilizer in the field of agriculture and aquaculture. Channa punctatus was exposed to 0.42 g.L -1 sublethal concentration for 4, 7, 14, 21 and 28 days. Due to such exposure, body growth and histological changes in liver were observed. It was revealed that weight, length and breadth of fish were gradually increased with the days of exposure in compare to control fish, whereas, liver showed an increase in sinusoidal space and lipidosis during early days, followed by a recovery from the stress of MOC on the 28th day.

Merits of magnetic resonance imaging (MRI) for the diagnosis of myositis ossificans circumscripta. Apport de l'imagerie par resonance magnetique (IRM) dans le diagnostic de la myosite ossifiante circonscrite (MOC)

Energy Technology Data Exchange (ETDEWEB)

Bouchardy, L.; Garcia, J. (Hopital Cantonal Geneve, Geneva (Switzerland))

1994-02-01

A retrospective study of 5 cases, 4 of myositis ossificans circumscripta (MOC) and 1 of non-ossificans myositis, is presented. The clinical presentation was a painful soft-tissues swelling, and the final diagnosis was established by biopsy in 3 cases and clinical evolution in 2 cases. Different types of imaging techniques were performed: 4 MRI, 2 arteriographies, 3 Tc 99m scintigraphies, 3 US, 3 CT and plain film radiographs for all patients. MOC is a benign process (as opposed to myositis ossificans progressiva, which is an hereditary pathology with a fatal prognosis) with 3 phases of evolution: an acute or pseudo-inflammatory phase, a sub-acute or pseudo-tumoral phase and a chronic phase with a spontaneous healing. The radiologic diagnostic findings are dependent of the phase of the disease. The calcifications are seen earlier with scintigraphy than plain films, with US being less helpful. A heterogenous mass and calcifications are seen with CT. MRI allows the characterization of oedema during the acute phase and sometimes can exclude a malignant process. MRI is the best method for an early diagnosis, the differential diagnosis and to follow the evolution. (authors). 26 refs., 8 figs.

Propuesta de Rehabilitación Urbana para la Colonia Tarahumara en Ciudad Cuauhtémoc, Chihuahua, México.

Directory of Open Access Journals (Sweden)

Leticia Peña Barrera

2014-12-01

El gobierno del Estado de Chihuahua, interesado en apoyar a comunidades tarahumaras o rarámuris, promueve la creación de la Colonia Tarahumara en la ciudad de Cuauhtémoc, donando en 2001 el terreno y el financiamiento para las primeras 50 viviendas en propiedad común, y así lograr su arraigo. En este trabajo se presenta la propuesta de reequipamiento urbano-ecológico de la Colonia Tarahumara, la cual fue presentada a la Fundación Tarahumara para la construcción de otras 50 unidades de vivienda, teniendo en cuenta factores determinantes de localización e identificación de las costumbres de la comunidad rarámuri, como también soluciones urbano-bioclimáticas, con el fin de que ésta pueda tener acceso a la financiación federal de la Sedesol y, por último, de contribuir al desarrollo sostenible de la comunidad tarahumara.

Constructing Predictive Estimates for Worker Exposure to Radioactivity During Decommissioning: Analysis of Completed Decommissioning Projects - Master Thesis

Energy Technology Data Exchange (ETDEWEB)

Dettmers, Dana Lee; Eide, Steven Arvid

2002-10-01

An analysis of completed decommissioning projects is used to construct predictive estimates for worker exposure to radioactivity during decommissioning activities. The preferred organizational method for the completed decommissioning project data is to divide the data by type of facility, whether decommissioning was performed on part of the facility or the complete facility, and the level of radiation within the facility prior to decommissioning (low, medium, or high). Additional data analysis shows that there is not a downward trend in worker exposure data over time. Also, the use of a standard estimate for worker exposure to radioactivity may be a best estimate for low complete storage, high partial storage, and medium reactor facilities; a conservative estimate for some low level of facility radiation facilities (reactor complete, research complete, pits/ponds, other), medium partial process facilities, and high complete research facilities; and an underestimate for the remaining facilities. Limited data are available to compare different decommissioning alternatives, so the available data are reported and no conclusions can been drawn. It is recommended that all DOE sites and the NRC use a similar method to document worker hours, worker exposure to radiation (person-rem), and standard industrial accidents, injuries, and deaths for all completed decommissioning activities.

The design, construction and application of time varying magnetic exposure system

International Nuclear Information System (INIS)

El-Din, S.A.A.; Saad, H.M.; Said, H.H.

2000-01-01

An exposure system has been designed and constructed to study the probable biological effects of a-50-Hz alternating field on mice. The system is in the form of a cooled water wooden cage that can accommodate 12 mice at a time. The cage is enclosed into an electromagnet consists of three parallel closely connected rectangular coils able to induce a magnetic field of an intensity up to 200 Gauss. The derivation of the equations to define the spatial distribution of the field due to the currents in the coils is presented. A computer program with basic language is suggested to calculate the field strength into the cage. A comparison is made between these computed values and the corresponding measured ones. A representative experiment was carried out where three mice groups were exposed one for 3 h/day the others were repeated for two days and three days respectively. A change was found in hemoglobin spectrum in comparison with the control group has been noticed. This result can be attributed to the change of the spin states of the heme-iron

A case-control study of airways obstruction among construction workers.

Science.gov (United States)

Dement, John; Welch, Laura; Ringen, Knut; Quinn, Patricia; Chen, Anna; Haas, Scott

2015-10-01

While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Approximately 18% (95% CI = 2-24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. A measure of all VGDF exposures combined was a strong predictor of COPD risk. Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Protective measures during construction against radon exposure

International Nuclear Information System (INIS)

Horn, W.

1990-01-01

Radon, thoron as well as their daughter products have an cancerogeneous effect on the human respiratory tracts. In this respect protective measures in the area of construction are of great importance. This article deals with constructional solutions which consist of different individual measures. Sources of radon are outside air, water, fuels, building materials as well as the building ground. Possible protective measures are divided into area-related (floor structure, intermediate floors, exterior walls of cellar, foundation slab, building ground), line-related (joints, cracks, wall ducts) as well as supplementary measures (tightly closing doors, arrangement of natural cross-ventilation and vertical ventilating shafts). (BWI) [de

Evaluation of Radiation Exposure during Construction and Operation of Concrete Bridge Reinforced with Very Low Level Radioactive Steel

International Nuclear Information System (INIS)

Panik, M.; Necas, V.

2012-01-01

A lot of nuclear power plants are approaching the end of their lifetime and they will be phased out. Decommissioning of these nuclear power plants involve complete dismantling of technologies and demolition of buildings. During this process it is produced plenty of waste material of different categories. Significant portion of decommissioning materials comprise radionuclides what is caused by contamination and activation processes mostly from the operational period of nuclear power plant. Attention in this paper is paid to waste steel from the decommissioning of nuclear power plants with the specific activity just slightly exceeding legislation limits for the unconditional release into the environment. From the traditional point of view this material should be treated, conditioned and disposed on the radioactive waste repository. Second possibility is to release this material conditionally and reuse it in chosen industrial application. Very low level radioactive steel scrap should be melted and melting products should be processed into products that can be applied in industry. First option requires considerable financial investment, human resources and repository capacity. Second option saves some financial funds and it enables to reuse and save potentially valuable material for the future. Paper comprises evaluation of external and internal exposure during construction and operation of concrete bridges that utilize very low level radioactive steel as part of their reinforcement. Two models of representative concrete bridges were created. External gamma exposure and exposure from inhalation and ingestion of radionuclides were calculated using suitable computational tools. VISIPLAN 3D ALARA planning tool was chosen for the calculation of external gamma exposure. Software GOLDSIM enables to calculate transport of radionuclides initially contained in conditionally released reinforcement steel through subsoil and sequential exposure of people caused by inhalation of

PM2.5 metal exposures and nocturnal heart rate variability: a panel study of boilermaker construction workers

Directory of Open Access Journals (Sweden)

Herrick Robert F

2008-07-01

Full Text Available Abstract Background To better understand the mechanism(s of particulate matter (PM associated cardiovascular effects, research priorities include identifying the responsible PM characteristics. Evidence suggests that metals play a role in the cardiotoxicity of fine PM (PM2.5 and in exposure-related decreases in heart rate variability (HRV. We examined the association between daytime exposure to the metal content of PM2.5 and night HRV in a panel study of boilermaker construction workers exposed to metal-rich welding fumes. Methods Twenty-six male workers were monitored by ambulatory electrocardiogram (ECG on a workday while exposed to welding fume and a non-workday (baseline. From the ECG, rMSSD (square root of the mean squared differences of successive intervals was summarized over the night (0:00–7:00. Workday, gravimetric PM2.5 samples were analyzed by x-ray fluorescence to determine metal content. We used linear mixed effects models to assess the associations between night rMSSD and PM2.5 metal exposures both with and without adjustment for total PM2.5. Matched ECG measurements from the non-workday were used to control for individual cardiac risk factors and models were also adjusted for smoking status. To address collinearity between PM2.5 and metal content, we used a two-step approach that treated the residuals from linear regression models of each metal on PM2.5 as surrogates for the differential effects of metal exposures in models for night rMSSD. Results The median PM2.5 exposure was 650 μg/m3; median metal exposures for iron, manganese, aluminum, copper, zinc, chromium, lead, and nickel ranged from 226 μg/m3 to non-detectable. We found inverse linear associations in exposure-response models with increased metal exposures associated with decreased night rMSSD. A statistically significant association for manganese was observed, with a decline of 0.130 msec (95% CI: -0.162, -0.098 in night rMSSD for every 1 μg/m3 increase in

Lead in Construction

National Research Council Canada - National Science Library

1993-01-01

Although Occupational Safety and Health Administration (OSHA) regulations for occupational lead exposure have been in effect since 1971 for the construction and general industries, the agency regulations for general industry in 1978...

Construction of a web-based questionnaire for longitudinal investigation of work exposure, musculoskeletal pain and performance impairments in high-performance marine craft populations.

Science.gov (United States)

Lo Martire, Riccardo; de Alwis, Manudul Pahansen; Äng, Björn Olov; Garme, Karl

2017-07-20

High-performance marine craft personnel (HPMCP) are regularly exposed to vibration and repeated shock (VRS) levels exceeding maximum limitations stated by international legislation. Whereas such exposure reportedly is detrimental to health and performance, the epidemiological data necessary to link these adverse effects causally to VRS are not available in the scientific literature, and no suitable tools for acquiring such data exist. This study therefore constructed a questionnaire for longitudinal investigations in HPMCP. A consensus panel defined content domains, identified relevant items and outlined a questionnaire. The relevance and simplicity of the questionnaire's content were then systematically assessed by expert raters in three consecutive stages, each followed by revisions. An item-level content validity index (I-CVI) was computed as the proportion of experts rating an item as relevant and simple, and a scale-level content validity index (S-CVI/Ave) as the average I-CVI across items. The thresholds for acceptable content validity were 0.78 and 0.90, respectively. Finally, a dynamic web version of the questionnaire was constructed and pilot tested over a 1-month period during a marine exercise in a study population sample of eight subjects, while accelerometers simultaneously quantified VRS exposure. Content domains were defined as work exposure, musculoskeletal pain and human performance, and items were selected to reflect these constructs. Ratings from nine experts yielded S-CVI/Ave of 0.97 and 1.00 for relevance and simplicity, respectively, and the pilot test suggested that responses were sensitive to change in acceleration and that the questionnaire, following some adjustments, was feasible for its intended purpose. A dynamic web-based questionnaire for longitudinal survey of key variables in HPMCP was constructed. Expert ratings supported that the questionnaire content is relevant, simple and sufficiently comprehensive, and the pilot test suggested

Environmental and biological monitoring of occupational exposure to polynuclear aromatic hydrocarbons during highway pavement construction in Italy.

Science.gov (United States)

Fostinelli, Jacopo; Madeo, Egidio; Toraldo, Emanuele; Sarnico, Michela; Luzzana, Giorgio; Tomasi, Cesare; De Palma, Giuseppe

2018-06-09

We performed a cross-sectional study with the main aim of evaluating occupational exposure to polycyclic aromatic hydrocarbons (PAHs) in workers involved in the pavement construction of a new highway in Northern Italy, where modified bitumen was used as binder for Hot Mix Asphalt. We applied a combined approach of air and biological monitoring. Both the aerosol and vapour phases of bitumen were collected applying the NIOSH 5506 method. The 16 PAHs listed as high priority by EPA were determined by HPLC-UV. End-of-shift urine samples were collected from 144 workers to determine 1-hydroxypyrene (1-OHP) and 2-naphthol (2-NAP) concentrations after enzyme digestion and HPLC-UV analysis. Socio-demographic and lifestyle information was collected by a questionnaire. Paving workers were actually exposed to PAHs, including carcinogenic compounds, that were measurable only in the aerosol phase. Higher exposure as well as dose levels were measured for the paver group. Biological monitoring confirmed that 1-OHP was less affected by smoking habits as compared to 2-NAP and showed a higher association with occupational exposure. Carcinogenic PAH compounds were detectable only in the aerosol phase and this must be taken into account in the adoption of preventive measures. Biomonitoring supported the superiority of 1-OHP as compared to 2-NAP in assessing the internal dose in such workers. Copyright © 2018. Published by Elsevier B.V.

Assessment of Relevant Exposure Pathways in Scenario of Reuse of Very Low Level Radioactive Steel in Tunnel Constructions

International Nuclear Information System (INIS)

Hrncir, T.; Necas, V.

2012-01-01

Decommissioning process and related management of generated radioactive materials during this process became important topics during last several years because of continuously increasing number of nuclear power plant approaching the end of their lifetime. The very low level radioactive waste category includes considerable amount of materials arising from decommissioning. In line with international incentives of optimization of the waste management process, alternative concepts of recycling and reuse of materials are considered. One of these concepts of such optimization is the conditional release of materials with their subsequent recycling and reuse in industrial or nuclear sector. This paper is devoted to an option of recycling and reuse of conditionally released steel in industrial sector, specifically in motorway tunnel constructions. It is assumed that very low level radioactive steel would be released and reused in form of steel reinforcing components, such as steel nets and bars, assembled in primary and secondary lining of motorway tunnel. Assessment of exposure pathways relevant for construction, operation and post-operation period was performed. The computational tool VISIPLAN 3D ALARA was used for calculation of external individual effective dose for personnel constructing the tunnel and for members of the public driving through already built motorway tunnel. The simulation software GOLDSIM was used for the assessment of internal exposure pathways. GOLDSIM environment enables modelling of degradation processes and transport of radionuclides through unsaturated and saturated zone of subsoil. There are international recommendations available for the concept of release of radioactive materials into the environment derived from the principles that the individual effective dose received by critical individual must not exceed some tens of microSv/yr. Dose limits 10 microSv/yr or 50 microSv/yr considering specific conditions are stated in Slovak legislation

Constructing an exposure chart: step by step (based on standard procedures)

International Nuclear Information System (INIS)

David, Jocelyn L; Cansino, Percedita T.; Taguibao, Angileo P.

2000-01-01

An exposure chart is very important in conducting radiographic inspection of materials. By using an accurate exposure chart, an inspector is able to avoid a trial and error way of determining correct time to expose a specimen, thereby producing a radiograph that has an acceptable density based on a standard. The chart gives the following information: x-ray machine model and brand, distance of the x-ray tube from the film, type and thickness of intensifying screens, film type, radiograph density, and film processing conditions. The methods of preparing an exposure chart are available in existing radiographic testing manuals. These described methods are presented in step by step procedures, covering the actual laboratory set-up, data gathering, computations, and transformation of derived data into Characteristic Curve and Exposure Chart

Developing a General Population Job-Exposure Matrix in the Absence of Sufficient Exposure Monitoring Data

OpenAIRE

Tmannetje, AM; McLean, DJ; Eng, AJ; Kromhout, H; Kauppinen, T; Fevotte, J; Pearce, NE

2011-01-01

In New Zealand, there is a need for a comprehensive and accessible database with national occupational exposure information, such as a general population job-exposure matrix (GPJEM). However, few New Zealand-specific exposure data exist that could be used to construct such a GPJEM. Here, we present the methods used to develop a GPJEM for New Zealand (NZJEM), by combining GPJEMs from other countries with New Zealand-specific exposure information, using wood dust as an example to illustrate thi...

Trauma exposure, resilience, social support, and PTSD construct validity among former prisoners of war.

Science.gov (United States)

Gold, P B; Engdahl, B E; Eberly, R E; Blake, R J; Page, W F; Frueh, B C

2000-01-01

The aim of this study was to investigate predictors of persistent symptoms of posttraumatic stress disorder (PTSD) and to examine the construct validity of PTSD in a national sample of 270 World War II and Korean Conflict prisoners of war (POWs). POWs were interviewed at two points in time (1965 and 1990). Predictors included PTSD symptomatology measured in 1965 by items from the Cornell Medical Index (CMI), severity of captivity trauma, resilience factors, and post-trauma social support. The criterion, symptomatology in the early 1990s, was evaluated with the PTSD module of the Structured Clinical Interview for DSM (SCID). The CMI provided only partial coverage of PTSD criteria and appeared to provide only a general index of distress. Clustering of SCID items in two-dimensional space via multidimensional scaling analysis offers some construct validation for the DSM's differentiation of PTSD symptoms into criterion groups, although there was not a perfect match. Trauma severity is best related to PTSD symptomatology experienced in 1990, mitigated in part by greater education level and age at the time of trauma exposure. Surprisingly, 1965 distress added only a modest amount to the prediction of current distress, while post-trauma social support added none. These findings support previous work showing the severe psychological sequelae of POW status 40-50 years after captivity, and indicate that trauma severity during captivity is the best predictor of current PTSD symptomatology. Results also add to our understanding of the conceptual differentiation of PTSD symptoms into separate and distinct symptom clusters.

Control technology for crystalline silica exposures in construction: wet abrasive blasting.

Science.gov (United States)

Golla, Vijay; Heitbrink, William

2004-03-01

This study was designed to document the effect that wet abrasive blasting has on reducing worker exposure to crystalline silica, which has been associated with silicosis and premature death. In this study, worker exposure to respirable crystalline silica was monitored during wet abrasive blasting on the exterior walls of a parking garage to remove surface concrete and expose the underlying aggregate. In this process a wet sand mix comprised of 80% dry sand and 20% water was used. Sampling and analysis revealed that the geometric mean respirable quartz concentration was 0.2 mg/m(3) for workers conducting abrasive blasting and 0.06 mg/m(3) for helpers. When abrasive blasting was conducted in areas that apparently had reduced natural ventilation, dust exposures appeared to increase. When compared with other published data, this case study suggests that wet abrasive blasting causes less exposure to crystalline silica than dry abrasive blasting.

Lack of contralateral suppression in transient-evoked otoacoustic emissions in multiple chemical sensitivity: a clinical correlation study

Directory of Open Access Journals (Sweden)

Alessandro Micarelli

2016-01-01

Full Text Available Multiple chemical sensitivity (MCS is a chronic disorder characterized by a variety of symptoms associated with the exposure to chemicals at a concentration below the toxic level. Previous studies have demonstrated peculiar responses in brain activity in these patients with respect to sensory stimuli while the association between chemical sensitivity and other environmental intolerances such as noise sensitivity has been questioned by researchers. In this study, a cohort of 18 MCS patients underwent transient-evoked otoacoustic emission (TEOAE testing with and without contralateral suppression to evaluate the functionality of the medial olivocochlear (MOC reflex involved in speech-in-noise sensitivity. Results were compared with an age- and gender-matched control group (n = 20 and correlation analysis with disease onset and quick environmental exposure sensitivity inventory (qEESI symptom severity scale was performed. Subjects affected by MCS showed statistically significant impairment of MOC reflex, and the onset of the disease and several symptom subscales showed to be correlated to such reduction in some of the frequencies tested. These data suggest that alterations of MOC reflex could be part of the complex features of this disease although more studies are needed to further explore auditory perception disorders in environmental intolerances.

Developing Asbestos Job Exposure Matrix Using Occupation and Industry Specific Exposure Data (1984–2008 in Republic of Korea

Directory of Open Access Journals (Sweden)

Sangjun Choi

2017-03-01

Conclusion: The newly constructed GPJEM which is generated from actual domestic quantitative exposure data could be useful in evaluating historical exposure levels to asbestos and could contribute to improved prediction of asbestos-related diseases among Koreans.

Perceived heat stress and health effects on construction workers.

Science.gov (United States)

Dutta, Priya; Rajiva, Ajit; Andhare, Dileep; Azhar, Gulrez Shah; Tiwari, Abhiyant; Sheffield, Perry

2015-01-01

Increasing heat waves-particularly in urban areas where construction is most prevalent, highlight a need for heat exposure assessment of construction workers. This study aims to characterize the effects of heat on construction workers from a site in Gandhinagar. This study involved a mixed methods approach consisting of a cross sectional survey with anthropometric measurements (n = 219) and four focus groups with construction workers, as well as environmental measurements of heat stress exposure at a construction site. Survey data was collected in two seasons i.e., summer and winter months, and heat illness and symptoms were compared between the two time periods. Thematic coding of focus group data was used to identify vulnerability factors and coping mechanisms of the workers. Heat stress, recorded using a wet bulb globe temperature monitor, was compared to international safety standards. The survey findings suggest that heat-related symptoms increased in summer; 59% of all reports in summer were positive for symptoms (from Mild to Severe) as compared to 41% in winter. Focus groups revealed four dominant themes: (1) Non-occupational stressors compound work stressors; (2) workers were particularly attuned to the impact of heat on their health; (3) workers were aware of heat-related preventive measures; and (4) few resources were currently available to protect workers from heat stress. Working conditions often exceed international heat stress safety thresholds. Female workers and new employees might be at increased risk of illness or injury. This study suggests significant health impacts on construction workers from heat stress exposure in the workplace, showed that heat stress levels were higher than those prescribed by international standards and highlights the need for revision of work practices, increased protective measures, and possible development of indigenous work safety standards for heat exposure.

Development of retrospective quantitative and qualitative job-exposure matrices for exposures at a beryllium processing facility.

Science.gov (United States)

Couch, James R; Petersen, Martin; Rice, Carol; Schubauer-Berigan, Mary K

2011-05-01

To construct a job-exposure matrix (JEM) for an Ohio beryllium processing facility between 1953 and 2006 and to evaluate temporal changes in airborne beryllium exposures. Quantitative area- and breathing-zone-based exposure measurements of airborne beryllium were made between 1953 and 2006 and used by plant personnel to estimate daily weighted average (DWA) exposure concentrations for sampled departments and operations. These DWA measurements were used to create a JEM with 18 exposure metrics, which was linked to the plant cohort consisting of 18,568 unique job, department and year combinations. The exposure metrics ranged from quantitative metrics (annual arithmetic/geometric average DWA exposures, maximum DWA and peak exposures) to descriptive qualitative metrics (chemical beryllium species and physical form) to qualitative assignment of exposure to other risk factors (yes/no). Twelve collapsed job titles with long-term consistent industrial hygiene samples were evaluated using regression analysis for time trends in DWA estimates. Annual arithmetic mean DWA estimates (overall plant-wide exposures including administration, non-production, and production estimates) for the data by decade ranged from a high of 1.39 μg/m(3) in the 1950s to a low of 0.33 μg/m(3) in the 2000s. Of the 12 jobs evaluated for temporal trend, the average arithmetic DWA mean was 2.46 μg/m(3) and the average geometric mean DWA was 1.53 μg/m(3). After the DWA calculations were log-transformed, 11 of the 12 had a statistically significant (p < 0.05) decrease in reported exposure over time. The constructed JEM successfully differentiated beryllium exposures across jobs and over time. This is the only quantitative JEM containing exposure estimates (average and peak) for the entire plant history.

Spatiotemporal aspects of flood exposure in Switzerland

Directory of Open Access Journals (Sweden)

Röthlisberger Veronika

2016-01-01

Full Text Available While flood hazard mapping in Switzerland is close to completion, only a limited number of studies have been specifically conducted on exposure and vulnerability. We fill this knowledge gap by conducting a nation-wide study of flood exposure of buildings in Switzerland. Therefore, we generate a country-wide comprehensive and homogenous data set of polygons of residential buildings and their period of construction and overlay these building polygons with compiled and harmonized flood hazard maps provided by the Swiss cantons. In this paper we present first results of spatiotemporal analyses, namely the evolution of exposure from 1919 to 2012. Surprising is the increase in the share of exposure of new constructed buildings since the 1980s which contradicts the indented effects of the Swiss flood risk management strategies and calls for further investigations.

Geospatial analysis of land use and water interaction in the peri-urban area of Cuauhtémoc, Chihuahua. A socio-environmental study in northern Mexico

Directory of Open Access Journals (Sweden)

Rolando Enrique Díaz Caravantes

2013-07-01

Full Text Available For decades, city growth has been considered only in terms of land availability. In cities of northern Mexico, usually located in arid or semi-arid regions, there is a high dependence on groundwater. For this reason, comprehensive planning urban must consider the peri-urban area not only in terms of soil, but also groundwater. Water transfer for urban use produces severe alterations to the natural environment as aquifer depletion and drastic changes in land use/cover. This paper presents a spatial analysis of land use and water in the peri-urban area of Ciudad Cuauhtémoc. Using geographic modeling and remote sensing we assessed the dynamics of land use/cover. The results indicate that land change processes occur in a context of high competition for water between different users. This process is not usually considered in studies measuring urban spatial expansion, but should be considered to fully understand the effects of urban growth in the territory.

Express-Air Screen-System to protect miners against radon exposures at small underground construction sites in old mining; Express-Wetterblenden-System zum Sofort-Schutz von Bergleuten vor Radonexpositionen bei untertaegigen Bergsicherungsarbeiten im Altbergbau

Energy Technology Data Exchange (ETDEWEB)

Dehnert, J. [Saechsisches Landesamt fuer Umwelt, Landwirtschaft und Geologie (Germany). Referat Strahlenschutz; Stopp, J. [Aluminiumbau und Verwaltungs GmbH Stopp, Schneeberg (Germany); Schoenherr, B. [Bergsicherung Schneeberg GmbH (Germany)

2016-07-01

A new Express-Air Screen-System (EAS) for miners was developed to reduce the radon exposures of miners at small construction sites of old mining. The EAS is a lightweight, modular and reusable construction kit of interlocking telescopic aluminum tubes, plastic foils and glue foam to shut off radon rich parts of galleries in some minutes only.

Predictors of Hearing Protection Use in Construction Workers

OpenAIRE

Edelson, Jane; Neitzel, Richard; Meischke, Hendrika; Daniell, William; Sheppard, Lianne; Stover, Bert; Seixas, Noah

2009-01-01

Objectives: Although noise-induced hearing loss is completely preventable, it remains highly prevalent among construction workers. Hearing protection devices (HPDs) are commonly relied upon for exposure reduction in construction, but their use is complicated by intermittent and highly variable noise, inadequate industry support for hearing conservation, and lax regulatory enforcement.

Toward responsible development and effective risk management of nano-enabled products in the U.S. construction industry

International Nuclear Information System (INIS)

West, Gavin H.; Lippy, Bruce E.; Cooper, Michael R.; Marsick, Daniel; Burrelli, Leonard G.; Griffin, Kelsey N.; Segrave, Alan M.

2016-01-01

The global construction sector is experiencing major improvements to building materials used in large quantities through commercial applications of nanotechnology. Nano-enabled construction products hold great promise for energy efficiency and resource conservation, but risk assessments lag as new products emerge. This paper presents results from an inventory, survey, and exposure assessment conducted by the authors and explores these findings in the broader context of evolving research trends and responsible development of nanotechnology. An inventory of 458 reportedly nano-enabled construction products provided insight into product availability, potential exposures, and deficiencies in risk communication that are barriers to adoption of proactive safety measures. Seasoned construction trainers surveyed were largely unaware of the availability of nano-enabled construction products. Exposure assessment demonstrated the effectiveness of ventilation to reduce exposures during mechanical abrasion of photocatalytic tiles containing titanium dioxide (TiO 2 ). Dissociated particles of TiO 2 just above the nanoscale (138 nm) were detected in the debris collected during cutting of the tiles, but measurements were below recommended exposure limits for TiO 2 . Exposure assessments remain scarce, and toxicological understanding primarily pertains to unincorporated nanomaterials; less is known about the occupational risks of nano-enabled construction products across their life cycle. Further research is needed to characterize and quantify exposure to debris released from nanocomposite materials for realistic risk assessment, and to ascertain how nanocomposite matrices, fillers, and degradation forces interact to affect release dynamics. Improving risk communication strategies and implementing safe work practices will cultivate responsible development of nanotechnology in construction, as will multidisciplinary research efforts

Toward responsible development and effective risk management of nano-enabled products in the U.S. construction industry

Energy Technology Data Exchange (ETDEWEB)

West, Gavin H.; Lippy, Bruce E., E-mail: blippy@cpwr.com; Cooper, Michael R. [CPWR - The Center for Construction Research and Training (United States); Marsick, Daniel [Marsick Consulting, LLC (United States); Burrelli, Leonard G.; Griffin, Kelsey N. [Environmental Profiles, Inc. (United States); Segrave, Alan M. [Bureau Veritas North America, Inc. (United States)

2016-02-15

The global construction sector is experiencing major improvements to building materials used in large quantities through commercial applications of nanotechnology. Nano-enabled construction products hold great promise for energy efficiency and resource conservation, but risk assessments lag as new products emerge. This paper presents results from an inventory, survey, and exposure assessment conducted by the authors and explores these findings in the broader context of evolving research trends and responsible development of nanotechnology. An inventory of 458 reportedly nano-enabled construction products provided insight into product availability, potential exposures, and deficiencies in risk communication that are barriers to adoption of proactive safety measures. Seasoned construction trainers surveyed were largely unaware of the availability of nano-enabled construction products. Exposure assessment demonstrated the effectiveness of ventilation to reduce exposures during mechanical abrasion of photocatalytic tiles containing titanium dioxide (TiO{sub 2}). Dissociated particles of TiO{sub 2} just above the nanoscale (138 nm) were detected in the debris collected during cutting of the tiles, but measurements were below recommended exposure limits for TiO{sub 2}. Exposure assessments remain scarce, and toxicological understanding primarily pertains to unincorporated nanomaterials; less is known about the occupational risks of nano-enabled construction products across their life cycle. Further research is needed to characterize and quantify exposure to debris released from nanocomposite materials for realistic risk assessment, and to ascertain how nanocomposite matrices, fillers, and degradation forces interact to affect release dynamics. Improving risk communication strategies and implementing safe work practices will cultivate responsible development of nanotechnology in construction, as will multidisciplinary research efforts.

Psychosocial hearing disadvantage and associated factors among construction workers in Mato Grosso, Brazil.

Science.gov (United States)

Santos, Andréia Cristina Munzlinger Dos; Silva, Ageo Mário Cândido da; Luccia, Gabriela Coelho Pereira de; Botelho, Clóvis; Riva, Delma Regina Della

2017-01-01

To estimate the prevalence and to analyze the factors associated with self-reported hearing handicap by construction workers in the state of Mato Grosso, Brazil. A cross-sectional study was conducted with 866 construction and heavy construction workers. Participants responded to an epidemiological survey subdivided in: identification data, sociodemographic data; lifestyle; work environment characteristics; occupational exposure factors; hearing protection measures; and hearing handicap inventory to quantify the psychosocial consequences of work-related hearing loss. The prevalence of hearing impairment among workers in the construction sector was 14.43% (n = 125). There were 311 emotional and social complaints related to hearing problems. Hearing handicap was associated with: 60 or over age group (PR = 1.94, 95%CI 1.01 - 3.71); alcohol consumption (PR = 1.94, 95%CI 1.38 - 2.73); direct exposure to noise (PR = 1.75; 95%CI 1.03 - 2.97); exposure to dust (PR = 1.59, 95%CI 1.13 - 2.24); non-use of earplugs (PR = 1.39, 95%CI 1.00 - 1.93); and non-use of neck flap cap (PR = 1.52, 95%CI 1.09 - 2.13). We observed a high prevalence of hearing impairment among workers in the construction sector associated with: individuals aged 60 years or older; alcoholism; exposure to noise and dust; non-use of earplugs; and non-use of neck flap cap. Therefore, it is necessary to implement policies aimed at preserving the hearing health of construction and heavy construction workers.

Prediction of gamma exposure rates in large nuclear craters

Energy Technology Data Exchange (ETDEWEB)

Tami, Thomas M; Day, Walter C [U.S. Army Engineer Nuclear Cratering Group, Lawrence Radiation Laboratory, Livermore, CA (United States)

1970-05-15

In many civil engineering applications of nuclear explosives there is the need to reenter the crater and lip area as soon as possible after the detonation to carry out conventional construction activities. These construction activities, however, must be delayed until the gamma dose rate, or exposure rate, in and around the crater decays to acceptable levels. To estimate the time of reentry for post-detonation construction activities, the exposure rate in the crater and lip areas must be predicted as a function of time after detonation. An accurate prediction permits a project planner to effectively schedule post-detonation activities.

Standardized approach for developing probabilistic exposure factor distributions

Energy Technology Data Exchange (ETDEWEB)

Maddalena, Randy L.; McKone, Thomas E.; Sohn, Michael D.

2003-03-01

The effectiveness of a probabilistic risk assessment (PRA) depends critically on the quality of input information that is available to the risk assessor and specifically on the probabilistic exposure factor distributions that are developed and used in the exposure and risk models. Deriving probabilistic distributions for model inputs can be time consuming and subjective. The absence of a standard approach for developing these distributions can result in PRAs that are inconsistent and difficult to review by regulatory agencies. We present an approach that reduces subjectivity in the distribution development process without limiting the flexibility needed to prepare relevant PRAs. The approach requires two steps. First, we analyze data pooled at a population scale to (1) identify the most robust demographic variables within the population for a given exposure factor, (2) partition the population data into subsets based on these variables, and (3) construct archetypal distributions for each subpopulation. Second, we sample from these archetypal distributions according to site- or scenario-specific conditions to simulate exposure factor values and use these values to construct the scenario-specific input distribution. It is envisaged that the archetypal distributions from step 1 will be generally applicable so risk assessors will not have to repeatedly collect and analyze raw data for each new assessment. We demonstrate the approach for two commonly used exposure factors--body weight (BW) and exposure duration (ED)--using data for the U.S. population. For these factors we provide a first set of subpopulation based archetypal distributions along with methodology for using these distributions to construct relevant scenario-specific probabilistic exposure factor distributions.

Occupational Health Hazards of Women Working in Brick Kiln and Construction Industry

Directory of Open Access Journals (Sweden)

V. G Vaidya

2015-01-01

Full Text Available Background: In brick kiln and construction industry the exposure to carbon monoxide and silica dust is the most common occupational hazard to the workers in these industries. A study on occupational health hazards of working women in these two unorganized sectors was undertaken by Lokmanya Medical Research Centre. Objectives: To study the effect of work site environment on the health of the women working in brick kiln and construction industry. An attempt was also made to study the seasonal changes in the concentration of carbon monoxide and dust at the worksite. Material and Methods: A cross-sectional study was conducted among the working women (age 18-40 years at brick kilns and construction sites during summer and winter season. They were examined primarily to assess the effect of working environment on health. Gasteck Detector Pump of model 800 and air sampling instrument (SKC Air Check–52 were used to measure concentration of carbon monoxide and dust in the air respectively. Results: There were 66% of women who were in the age group of 18-40 years and most of them (94% were married. At brick kiln sites, average CO exposure was 62.8 ppm and 55.5 ppm and average dust exposure was 3 3 146.1 mg/m and 91.4 mg/m in summer and winter season respectively.At construction sites, average dust exposure was 41.5 ppm and 90.8 ppm in summer and winter. Conclusion: Both exposure to CO and dust were more in summer than in winter in brick kiln industry whereas in construction industry the exposure to dust was more in winter season. A high level of morbidity in the form of headache, bodyache, problems with vision, cough and breathlessness were observed in both industries. It is strongly recommended to take pollution control measures.

A model for the catabolism of rhizopine in Rhizobium leguminosarum involves a ferredoxin oxygenase complex and the inositol degradative pathway.

Science.gov (United States)

Bahar, M; de Majnik, J; Wexler, M; Fry, J; Poole, P S; Murphy, P J

1998-11-01

Rhizopines are nodule-specific compounds that confer an intraspecies competitive nodulation advantage to strains that can catabolize them. The rhizopine (3-O-methyl-scyllo-inosamine, 3-O-MSI) catabolic moc gene cluster mocCABRDE(F) in Rhizobium leguminosarum bv. viciae strain 1a is located on the Sym plasmid. MocCABR are homologous to the mocCABR gene products from Sinorhizobium meliloti. MocD and MocE contain motifs corresponding to a TOL-like oxygenase and a [2Fe-2S] Rieske-like ferredoxin, respectively. The mocF gene encodes a ferredoxin reductase that would complete the oxygenase system, but is not essential for rhizopine catabolism. We propose a rhizopine catabolic model whereby MocB transports rhizopine into the cell and MocDE and MocF (or a similar protein elsewhere in the genome), under the regulation of MocR, act in concert to form a ferredoxin oxygenase system that demethylates 3-O-MSI to form scyllo-inosamine (SI). MocA, an NAD(H)-dependent dehydrogenase, and MocC continue the catabolic process. Compounds formed then enter the inositol catabolic pathway.

Mars: Detaching of the Free Water Signature (FWS) Presence Regions on the Base of HEND/ODYSSEY Data and Their Correlation with Some Permafrost Features from MOC Data

Science.gov (United States)

Kuzmin, R. O.; Mitrofanov, I. G.; Litvak, M. L.; Boynton, M. V.; Saunders, R. S.

2003-01-01

The first results from global mapping of the neutron albedo from Mars by HEND instrument have shown the noticeable deficit of both the epithermal (EN) and the fast (FN) neutrons counts rate in the high latitudes regions of both hemispheres of the planet. The deficit is indicative for high enriching of the surface regolith by hydrogen, which may correspond to amount of any water phases and forms. The objectives of our study are the spatial and temporal variations of the free water (ice) signature in the Martian surface layer on the base of HEND/ODYSSEY data and their correlation with spatial spreading of some permafrost features, mapped on the base of MOC images. For the study we used the results of the global mapping (pixel 5 x5 ) of EN and FN albedo, realized by HEND/ODYSSEY in the period from 17 February to 10 December 2002 year.

Designing exposure registries for improved tracking of occupational exposure and disease.

Science.gov (United States)

Arrandale, Victoria H; Bornstein, Stephen; King, Andrew; Takaro, Timothy K; Demers, Paul A

2016-06-27

Registries are one strategy for collecting information on occupational exposure and disease in populations. Recently leaders in the Canadian occupational health and safety community have shown an interest in the use of occupational exposure registries. The primary goal of this study was to review a series of Canadian exposure registries to identify their strengths and weaknesses as a tool for tracking occupational exposure and disease in Canada. A secondary goal was to identify the features of an exposure registry needed to specifically contribute to prevention, including the identification of new exposure-disease relationships. A documentary review of five exposure registries from Canada was completed. Strengths and limitations of the registries were compared and key considerations for designing new registries were identified. The goals and structure of the exposure registries varied considerably. Most of the reviewed registries had voluntary registration, which presents challenges for the use of the data for either surveillance or epidemiology. It is recommended that eight key issues be addressed when planning new registries: clear registry goal(s), a definition of exposure, data to be collected (and how it will be used), whether enrolment will be mandatory, as well as ethical, privacy and logistical considerations. When well constructed, an exposure registry can be a valuable tool for surveillance, epidemiology and ultimately the prevention of occupational disease. However, exposure registries also have a number of actual and potential limitations that need to be considered.

Disabling occupational injury in the US construction industry, 1996.

Science.gov (United States)

Courtney, Theodore K; Matz, Simon; Webster, Barbara S

2002-12-01

In 1996 the US construction industry comprised 5.4% of the annual US employment but accounted for 7.8% of nonfatal occupational injuries and illness and 9.7% of cases involving at least a day away from work. Information in the published literature on the disability arising from construction injuries is limited. The construction claims experience (n = 35,790) of a large workers' compensation insurer with national coverage was examined. The leading types and sources of disabling occupational morbidity in 1996 in the US construction industry were identified. Disability duration was calculated from indemnity payments data using previously published methods. The average disability duration for an injured construction worker was 46 days with a median of 0 days. The most frequently occurring conditions were low back pain (14.8%), foreign body eye injuries (8.5%), and finger lacerations (4.8%). Back pain also accounted for the greatest percentage of construction claim costs (21.3%) and disability days (25.5%). However, the conditions with the longest disability durations were sudden-onset injuries, including fractures of the ankle (median = 55 days), foot (42 days), and wrist (38 days). Same-level and elevated falls were the principal exposures for fractures of the wrist and ankle, whereas elevated falls and struck by incidents accounted for the majority of foot fractures. Manual materials handling activities were most often associated with low back pain disability. The results suggest that these most disabling injuries can be addressed by increasing primary prevention resources in slips and falls and exposures related to injuries of sudden-onset as well as in reducing manual materials handling and other exposures associated with more gradual-onset injuries.

Human Machine Interaction by Simulation of Dynamics of Construction Machinery

DEFF Research Database (Denmark)

Langer, Thomas Heegaard

-body vibration exposure was more than 20 percent and at the same time the fuel consumption was reduced significant. Training of operators is hence beneficial for both employees and employers of the construction industry. The whole-body vibration exposure on operators of dump trucks are dominated by off-road......This industrial Ph.D. project concerns whole-body vibrations in human operated construction machinery. The emissions of these vibrations is closely related to the subjective experience of comfort and in some cases these vibrations can occur in a level which can cause the operator back disorders...

Lung cancer risk among workers in the construction industry: results from two case–control studies in Montreal

OpenAIRE

Lacourt, Aude; Pintos, Javier; Lavoué, Jérôme; Richardson, Lesley; Siemiatycki, Jack

2015-01-01

Background Given the large number of workers in the construction industry, it is important to derive accurate and valid estimates of cancer risk, and in particular lung cancer risk. In most previous studies, risks among construction workers were compared with general populations including blue and white collar workers. The main objectives of this study were to assess whether construction workers experience excess lung cancer risk, and whether exposure to selected construction industry exposur...

Construction of a computational exposure model for dosimetric calculations using the EGS4 Monte Carlo code and voxel phantoms

International Nuclear Information System (INIS)

Vieira, Jose Wilson

2004-07-01

The MAX phantom has been developed from existing segmented images of a male adult body, in order to achieve a representation as close as possible to the anatomical properties of the reference adult male specified by the ICRP. In computational dosimetry, MAX can simulate the geometry of a human body under exposure to ionizing radiations, internal or external, with the objective of calculating the equivalent dose in organs and tissues for occupational, medical or environmental purposes of the radiation protection. This study presents a methodology used to build a new computational exposure model MAX/EGS4: the geometric construction of the phantom; the development of the algorithm of one-directional, divergent, and isotropic radioactive sources; new methods for calculating the equivalent dose in the red bone marrow and in the skin, and the coupling of the MAX phantom with the EGS4 Monte Carlo code. Finally, some results of radiation protection, in the form of conversion coefficients between equivalent dose (or effective dose) and free air-kerma for external photon irradiation are presented and discussed. Comparing the results presented with similar data from other human phantoms it is possible to conclude that the coupling MAX/EGS4 is satisfactory for the calculation of the equivalent dose in radiation protection. (author)

Ti plasmid-encoded genes responsible for catabolism of the crown gall opine mannopine by Agrobacterium tumefaciens are homologs of the T-region genes responsible for synthesis of this opine by the plant tumor.

Science.gov (United States)

Kim, K S; Farrand, S K

1996-06-01

Agrobacterium tumefaciens NT1 harboring pSaB4, which contains the 14-kb BamHI fragment 4 from the octopine/mannityl opine-type Ti plasmid pTi15955, grew well with agropine (AGR) but slowly with mannopine (MOP) as the sole carbon source. When a second plasmid encoding a dedicated transport system for MOP was introduced, these cells grew well with both AGR and MOP. Transposon insertion mutagenesis and subcloning identified a 5.7-kb region of BamHI fragment 4 that encodes functions required for the degradation of MOP. DNA sequence analysis revealed seven putative genes in this region: mocD (moc for mannityl opine catabolism) and mocE, oriented from right to left, and mocRCBAS, oriented from left to right. Significant identities exist at the nucleotide and derived amino acid sequence levels between these moc genes and the mas genes that are responsible for opine biosynthesis in crown gall tumors. MocD is a homolog of Mas2, the anabolic conjugase encoded by mas2'. MocE and MocC are related to the amino half and the carboxyl half, respectively, of Mas1 (MOP reductase), the second enzyme for MOP biosynthesis. These results indicate that the moc and mas genes evolved from a common origin. MocR and MocS are related to each other and to a putative repressor for the AGR degradation system encoded by the rhizogenic plasmid pRiA4. MocB and MocA are homologs of 6-phosphogluconate dehydratase and glucose-6-phosphate dehydrogenase, respectively. Mutations in mocD and mocE, but not mocC, are suppressed by functions encoded by the chromosome or the 450-kb megaplasmid present in many Agrobacterium isolates. We propose that moc genes derived from genes located elsewhere in the bacterial genome and that the tumor-expressed mas genes evolved from the bacterial moc genes.

Allergy-related disorders in the construction industry.

Science.gov (United States)

Carino, Mauro; Romita, Paolo; Foti, Caterina

2013-01-01

Working conditions in the construction industry have improved in many industrialized countries, but heavy physical work with recurrent exposure to chemical agents, dust, and climatic influences still represents considerable risk for construction workers and may affect their health. The aim of this review is to analyze available data of the literature on allergy-related respiratory and skin disorders with emphasis on a preventive appraisal in order to produce statements and recommendations based on research evidence. The most common agents involved in the construction industry as a cause of occupational asthma (OA) in industrialized countries are isocyanates, wood dust, resins, glues, cobalt, and chromium. Allergic contact dermatitis (ACD) is an immunologic cell-mediated response to a sensitizing agent and the most common sensitizing agents associated with construction workers are epoxy resins, thiurams and thiazoles, and chromates. Medical surveillance must consider individual risk factors such as differences in individual susceptibility and sensitization to agents at workplace. Once work-related disorder is confirmed, adequate fitness for work should be assessed for the worker impaired by health condition. A reliable diagnosis of an index case is a sentinel event that may reveal risks for workers with similar exposure, leading to a revised risk assessment at the workplace that should reduce the risk and prevent further cases.

Mortality from non-malignant respiratory diseases among people with silicosis in Hong Kong: exposure-response analyses for exposure to silica dust.

Science.gov (United States)

Tse, L A; Yu, I T S; Leung, C C; Tam, W; Wong, T W

2007-02-01

To examine the exposure-response relationships between various indices of exposure to silica dust and the mortality from non-malignant respiratory diseases (NMRDs) or chronic obstructive pulmonary diseases (COPDs) among a cohort of workers with silicosis in Hong Kong. The concentrations of respirable silica dust were assigned to each industry and job task according to historical industrial hygiene measurements documented previously in Hong Kong. Exposure indices included cumulative dust exposure (CDE) and mean dust concentration (MDC). Penalised smoothing spline models were used as a preliminary step to detect outliers and guide further analyses. Multiple Cox's proportional hazard models were used to estimate the dust effects on the risk of mortality from NMRDs or COPDs after truncating the highest exposures. 371 of the 853 (43.49%) deaths occurring among 2789 workers with silicosis during 1981-99 were from NMRDs, and 101 (27.22%) NMRDs were COPDs. Multiple Cox's proportional hazard models showed that CDE (p = 0.009) and MDC (pcaisson workers and among those ever employed in other occupations with high exposure to silica dust. No exposure-response relationship was observed for surface construction workers with low exposures. A clear upward trend for both NMRDs and COPDs mortality was found with increasing severity of radiological silicosis. This study documented an exposure-response relationship between exposure to silica dust and the risk of death from NMRDs or COPDs among workers with silicosis, except for surface construction workers with low exposures. The risk of mortality from NMRDs increased significantly with the progression of International Labor Organization categories, independent of dust effects.

Acceleration and higher order schemes of a characteristic solver for the solution of the neutron transport equation in 3D axial geometries

International Nuclear Information System (INIS)

Sciannandrone, Daniele

2015-01-01

The topic of our research is the application of the Method of Long Characteristics (MOC) to solve the Neutron Transport Equation in three-dimensional axial geometries. The strength of the MOC is in its precision and versatility. As a drawback, it requires a large amount of computational resources. This problem is even more severe in three dimensional geometries, for which unknowns reach the order of tens of billions for assembly-level calculations. The first part of the research has dealt with the development of optimized tracking and reconstruction techniques which take advantage of the regularities of three-dimensional axial geometries. These methods have allowed a strong reduction of the memory requirements and a reduction of the execution time of the MOC calculation. The convergence of the iterative scheme has been accelerated with a lower order transport operator (DPN) which is used for the initialization of the solution and for solving the synthetic problem during MOC iterations. The algorithms for the construction and solution of the MOC and DPN operators have been accelerated by using shared-memory parallel paradigms which are more suitable for standard desktop working stations. An important part of this research has been devoted to the implementation of scheduling techniques to improve the parallel efficiency. The convergence of the angular quadrature formula for three-dimensional cases is also studied. Some of these formulas take advantage of the reduced computational costs of the treatment of planar directions and the vertical direction to speed up the algorithm. The verification of the MOC solver has been done by comparing results with continuous-in-energy Monte Carlo calculations. For this purpose a coupling of the 3D MOC solver with the Subgroup method is proposed to take into account the effects of cross sections resonances. The full calculation of a FBR assembly requires about 2 h of execution time with differences of few pcm with respect to the

Lung cancer risk among workers in the construction industry: results from two case-control studies in Montreal.

Science.gov (United States)

Lacourt, Aude; Pintos, Javier; Lavoué, Jérôme; Richardson, Lesley; Siemiatycki, Jack

2015-09-22

Given the large number of workers in the construction industry, it is important to derive accurate and valid estimates of cancer risk, and in particular lung cancer risk. In most previous studies, risks among construction workers were compared with general populations including blue and white collar workers. The main objectives of this study were to assess whether construction workers experience excess lung cancer risk, and whether exposure to selected construction industry exposures carries excess risks. We wished to address these objectives within the sub-population of blue collar workers. Two case-control studies were conducted in Montreal. Combined, they included 1593 lung cancer cases and 1427 controls, of whom 1304 cases and 1081 controls had been blue collar workers. Detailed lifetime job histories were obtained and translated by experts into histories of exposure to chemical agents. The two key analyses were to estimate odds ratio (OR) estimates of lung cancer risk: a) for all blue-collar construction workers compared with other blue-collar workers, and b) for construction workers exposed to each of 20 exposure agents found in the construction industry compared with construction workers unexposed to those agents. All analyses were conducted using unconditional logistic regression adjusted for socio-demographic factors and smoking history. The OR for all construction workers combined was 1.11 (95 % CI: 0.90-1.38), based on 381 blue collar construction workers. Analyses of specific exposures were hampered by small numbers and imprecise estimates. While none of 20 occupational agents examined was significantly associated with lung cancer, the following agents manifested non-significantly elevated ORs: asbestos, silica, Portland cement, soil dust, calcium oxide and calcium sulfate. Compared with other blue collar workers, there was only a slight increased risk of lung cancer for subjects who ever held an occupation in the construction industry. The analyses of

The Australian Work Exposures Study: Prevalence of Occupational Exposure to Formaldehyde.

Science.gov (United States)

Driscoll, Timothy R; Carey, Renee N; Peters, Susan; Glass, Deborah C; Benke, Geza; Reid, Alison; Fritschi, Lin

2016-01-01

The aims of this study were to produce a population-based estimate of the prevalence of work-related exposure to formaldehyde, to identify the main circumstances of exposure and to describe the use of workplace control measures designed to decrease those exposures. The analysis used data from the Australian Workplace Exposures Study, a nationwide telephone survey, which investigated the current prevalence and exposure circumstances of work-related exposure to 38 known or suspected carcinogens, including formaldehyde, among Australian workers aged 18-65 years. Using the web-based tool OccIDEAS, semi-quantitative information was collected about exposures in the current job held by the respondent. Questions were addressed primarily at tasks undertaken rather than about self-reported exposures. Of the 4993 included respondents, 124 (2.5%) were identified as probably being exposed to formaldehyde in the course of their work [extrapolated to 2.6% of the Australian working population-265 000 (95% confidence interval 221 000-316 000) workers]. Most (87.1%) were male. About half worked in technical and trades occupations. In terms of industry, about half worked in the construction industry. The main circumstances of exposure were working with particle board or plywood typically through carpentry work, building maintenance, or sanding prior to painting; with the more common of other exposures circumstances being firefighters involved in fighting fires, fire overhaul, and clean-up or back-burning; and health workers using formaldehyde when sterilizing equipment or in a pathology laboratory setting. The use of control measures was inconsistent. Workers are exposed to formaldehyde in many different occupational circumstances. Information on the exposure circumstances can be used to support decisions on appropriate priorities for intervention and control of occupational exposure to formaldehyde, and estimates of burden of cancer arising from occupational exposure to formaldehyde

Exposición ocupacional a agentes químicos en la construcción de edificios Occupational exposure to chemicals in the construction of buildings

Directory of Open Access Journals (Sweden)

Gabriela Hernández Gómez

2012-11-01

Full Text Available Objetivos: (i estimar los niveles de exposición ocupacional a humos y polvos de cromo, hierro y manganeso y polvo inhalable de madera en tareas asociadas a la construcción de edificios; (ii generar una propuesta de matriz de exposición ocupacional a los agentes estudiados. Materiales y métodos: el estudio fue exploratorio e incluyó nueve proyectos de construcción de edificios de cinco empresas. Se utilizaron los métodos de muestreo y análisis descritos en OSHA ID121 y MDHS 14/03. Se determinaron los niveles de exposición ocupacional para el análisis de cumplimiento con el estándar nacional INTE 31- 08-04-01. Se estimó la influencia de los posibles determinantes de exposición mediante pruebas de asociación estadística. Resultados: La media de los niveles de exposición ocupacional para polvo inhalable de madera en carpintería fue de 3.55 mg/m3; se encontró relación entre el tiempo de muestreo y las concentraciones obtenidas. No se detectó la presencia de cromo en las muestras recolectadas. La media de hierro fue de 0.78 mg/m3; no se encontró relación entre las concentraciones y los posibles determinantes de la exposición. En manganeso, la media fue de 0.04 mg/ m3; la temperatura fue el factor con mayor influencia. Conclusiones: los niveles de exposición ocupacional a hierro, manganeso y polvo inhalable de madera variaron entre constructoras y proyectos. Las concentraciones de polvo se asociaron al tiempo de muestreo y no se encontró evidencia estadística significativa para los determinantes de la exposición a metales.Objectives: (i To estimate occupational exposure levels to chromium, manganese and iron fumes, and from wood dust in tasks related to building construction. (ii To propose an occupational exposure matrix to agents in study. Materials and methods: An exploratory study was carried including nine construction projects from five companies. Analytical Methods were based on documents: OSHA ID121 and MDHS 14

Reuse of conditional released materials from decommissioning; a review of approaches and scenarios with long-term constructions - 59149

International Nuclear Information System (INIS)

Daniska, Vladimir; Pritrsky, Jozef; Ondra, Frantisek; Zachar, Matej; Necas, Vladimir

2012-01-01

Paper presents the overall scope and actual results of the project for evaluation of representative scenarios for reuse of conditionally released materials from decommissioning. Aim of the project is to evaluate the possibilities of reuse of conditionally released steels and concrete in technical constructions which guarantee the long-term preservation of design properties over periods of 50-100 years. Interaction of conditionally released materials with public is limited and predictable due to design and purpose of selected constructions and due to fact that in many scenarios these materials are embedded in non-radioactive materials such as bars in reinforced concrete. Worker's scenarios for preparation, operation and maintenance of these constructions are analysed in detail including the manufacturing of elements for these constructions. Project aims to evaluate the scenarios of reuse of conditionally released materials in a complex way in order to develop the data for designers of scenarios and to evaluate the volumes of conditionally released materials based on facility (to be decommissioned) inventory data. The long-term constructions considered are bridges, tunnels, roads, railway constructions, industrial buildings, power industry equipment and others. Evaluation covers following areas: - Analysis of activities for manufacturing of reinforcement bars, rolled steel sheets and other steel elements and analysis of activities for construction of evaluated scenarios in order to evaluate the external exposure of professionals performing these activities; - Analysis of external exposure of professionals involved in operation and maintenance of the long-term constructions; analysis of external exposure of public groups which are exposed to evaluated constructions; - Analysis of internal exposure of public groups from the radionuclides released from the evaluated scenarios based on models for migration of radionuclides from the long-term constructions to critical

Occupational exposure to endocrine-disrupting chemicals and the risk of uveal melanoma

DEFF Research Database (Denmark)

Behrens, Thomas; Lynge, Elsebeth; Cree, Ian

2012-01-01

-disrupting agents. We constructed several exposure scores, taking into account intensity of exposure, use of personal protective equipment, and exposure duration. We calculated unconditional logistic regression analyses, adjusting for country, age, sex, eye color and a history of ocular damage due to intense...

Cerebellar atrophy related to chronic exposure to toluene: case report

Directory of Open Access Journals (Sweden)

Benito Pereira Damasceno

1994-03-01

Full Text Available A 31-year-old woman presented slowly progressing ataxia and neurasthenic symptoms after 14-year occupational exposure to low concentration toluene vapour. Examination disclosed only cerebellar signs. Cognitive functions were normal except moderate visuo-spatial and constructive deficit CT imaging showed severe pancerebellar atrophy without pathological signs in other brain structures. Two years after she was removed from workplace, CT imaging and ataxia showed no worsening, while visuo-constructive function improved. The authors warn against possible neurotoxic risk associated with this kind of exposure.

Factors affecting outdoor exposure in winter: population-based study

Science.gov (United States)

Mäkinen, Tiina M.; Raatikka, Veli-Pekka; Rytkönen, Mika; Jokelainen, Jari; Rintamäki, Hannu; Ruuhela, Reija; Näyhä, Simo; Hassi, Juhani

2006-09-01

The extent of outdoor exposure during winter and factors affecting it were examined in a cross-sectional population study in Finland. Men and women aged 25-74 years from the National FINRISK 2002 sub-study ( n=6,591) were queried about their average weekly occupational, leisure-time and total cold exposure during the past winter. The effects of gender, age, area of residence, occupation, ambient temperature, self-rated health, physical activity and education on cold exposure were analysed. The self-reported median total cold exposure time was 7 h/week (8 h men, 6 h women),employed in agriculture, forestry and industry/mining/construction or related occupations, being less educated and being aged 55-64 years. Factors associated with increased leisure-time cold exposure among men were: employment in industry/mining/construction or related occupations, being a pensioner or unemployed, reporting at least average health, being physically active and having college or vocational education. Among women, being a housewife, pensioner or unemployed and engaged in physical activity increased leisure-time cold exposure, and young women were more exposed than older ones. Self-rated health was positively associated with leisure time cold exposure in men and only to a minor extent in women. In conclusion, the subjects reported spending 4% of their total time under cold exposure, most of it (71%) during leisure time. Both occupational and leisure-time cold exposure is greater among men than women.

Worker exposure to silica dust in the non-mining sectors: literature review.

CSIR Research Space (South Africa)

Khoza, N

2009-08-01

Full Text Available .csir.co.za Non-mining industries and silica exposure: Globally ? Building, highway, bridge construction ? Sand blasting ? Masonry work ? Rock crushing ? Ceramics, including pottery, sanitary ware and tiles Slide 29 ? CSIR 2009..., brick, clay and pottery ? Railways ? Manufacturing of soaps and detergents ? Stone or granite cutting Silica exposure: Global trends and effects ? U.S.A.: From 1985-90 & 1990-99 silicosis caused 11% & 13%, workplace deaths in construction...

Development of a source-exposure matrix for occupational exposure assessment of electromagnetic fields in the INTEROCC study.

Science.gov (United States)

Vila, Javier; Bowman, Joseph D; Figuerola, Jordi; Moriña, David; Kincl, Laurel; Richardson, Lesley; Cardis, Elisabeth

2017-07-01

To estimate occupational exposures to electromagnetic fields (EMF) for the INTEROCC study, a database of source-based measurements extracted from published and unpublished literature resources had been previously constructed. The aim of the current work was to summarize these measurements into a source-exposure matrix (SEM), accounting for their quality and relevance. A novel methodology for combining available measurements was developed, based on order statistics and log-normal distribution characteristics. Arithmetic and geometric means, and estimates of variability and maximum exposure were calculated by EMF source, frequency band and dosimetry type. The mean estimates were weighted by our confidence in the pooled measurements. The SEM contains confidence-weighted mean and maximum estimates for 312 EMF exposure sources (from 0 Hz to 300 GHz). Operator position geometric mean electric field levels for radiofrequency (RF) sources ranged between 0.8 V/m (plasma etcher) and 320 V/m (RF sealer), while magnetic fields ranged from 0.02 A/m (speed radar) to 0.6 A/m (microwave heating). For extremely low frequency sources, electric fields ranged between 0.2 V/m (electric forklift) and 11,700 V/m (high-voltage transmission line-hotsticks), whereas magnetic fields ranged between 0.14 μT (visual display terminals) and 17 μT (tungsten inert gas welding). The methodology developed allowed the construction of the first EMF-SEM and may be used to summarize similar exposure data for other physical or chemical agents.

Construction materials and Radon

International Nuclear Information System (INIS)

Paschuk, Sergei A.; Correa, Janine Nicolosi; Loriane, Fior; Schelin, Hugo R.; Pottker, Fabiana; Paula Melo, Vicente de

2008-01-01

Full text: Current studies have been performed with the aim to find the correlation of radon concentration in the air and used construction materials. At the first stage of the measurements different samples of materials used in civil construction were studied as a source of radon in the air and at the second step it was studied the radon infiltration insulation using different samples of finishing materials. For 222 Rn concentration measurements related to different construction materials as well as for the studies of radon emanation and its reduction, the sealed cell chambers, of approximately 60 x 60cm 2 , have been built using the ceramic and concrete blocks. This construction has been performed within protected and isolated laboratory environment to maintain the air humidity and temperature stable. These long term measurements have been performed using polycarbonate alpha track passive detectors. The exposure time was set about 15 days considering previous calibration performed at the Institute of Radiation Protection and Dosimetry (IRD/CNEN), where the efficiency of 70% was obtained for the density of alpha particle tracks about 13.8 cm -2 per exposure day and per kBq/m 3 of radon activity concentration. The chemical development of alpha tracks has been achieved by electrochemical etching. The track identification and counting have been done using a code based on the MATLAB Image Processing Toolbox. The cell chambers have been built following four principle steps: 1) Assembling the walls using the blocks and mortar; 2) Plaster installation; 3) Wall surface finishing using the lime; 4) Wall surface insulation by paint. Making the comparison between three layers installed at the masonry walls from concrete and ceramic blocks, it could be concluded that only wall painting with acrylic varnish attended the expectation and reduced the radon emanation flow by the factor of 2.5 approximately. Studied construction materials have been submitted the instant

A study on air pollution concentration at Desa parkcity construction site

African Journals Online (AJOL)

This study assesses the effect of construction workers exposure towards the air pollution to the correlation between meteorological factor with the particulate matter and other gases concentration at a construction site in DesaParkcity. The concentration of PM was collected by using low volume sampler meanwhile CO, CO2, ...

Occupational exposure to diesel engine exhaust: a literature review.

Science.gov (United States)

Pronk, Anjoeka; Coble, Joseph; Stewart, Patricia A

2009-07-01

Diesel exhaust (DE) is classified as a probable human carcinogen. Aims were to describe the major occupational uses of diesel engines and give an overview of personal DE exposure levels and determinants of exposure as reported in the published literature. Measurements representative of personal DE exposure were abstracted from the literature for the following agents: elemental carbon (EC), particulate matter (PM), carbon monoxide (CO), nitrogen oxide (NO), and nitrogen dioxide (NO(2)). Information on determinants of exposure was abstracted. In total, 3528 EC, 4166 PM, 581 CO, 322 NO, and 1404 NO(2) measurements were abstracted. From the 10,001 measurements, 32% represented exposure from on-road vehicles and 68% from off-road vehicles (30% mining, 15% railroad, and 22% others). Highest levels were reported for enclosed underground work sites in which heavy equipment is used: mining, mine maintenance, and construction (EC: 27-658 microg/m(3)). Intermediate exposure levels were generally reported for above-ground (semi-) enclosed areas in which smaller equipment was run: mechanics in a shop, emergency workers in fire stations, distribution workers at a dock, and workers loading/unloading inside a ferry (generally: ECunderground mining and construction, intermediate for working in above-ground (semi-) enclosed areas and lowest for working outside or separated from the source. The presented data can be used as a basis for assessing occupational exposure in population-based epidemiological studies and guide future exposure assessment efforts for industrial hygiene and epidemiological studies.

The Palaearctic types of Chrysididae (Insecta, Hymenoptera) deposited in the Hungarian Natural History Museum, Budapest.

Science.gov (United States)

Rosa, Paolo; Vas, Zoltán; Xu, Zai-Fu

2017-04-11

A critical and annotated catalogue of the Palaearctic types of chrysidid species, subspecies and varieties deposited in the Magyar Természettudományi Múzeum is given. The lectotype of Hedychrum luculentum Förster, 1853 and the neotype of Chrysis amasina Mocsáry, 1889 are designated. Six new synonyms are proposed: Chrysis varicornis Spinola, 1838 = Chrysis cyanocoelia Mocsáry, 1889, syn. nov.; Hedychridium adventicium Zimmermann, 1962 = Hedychridium jazygicum Móczár, 1964, syn. nov.; Hedychrum cribratum Mocsáry, 1909 = Hedychrum punctigerum Mocsáry, 1909, syn. nov.; Holopyga generosa (Förster, 1853) = Holopyga hortobagyensis Móczár, 1984, syn. nov.; Holopyga turkestanica Mocsáry, 1909 = Holopyga crassepuncta Semenov, 1954, syn. nov.; and Pseudomalus cupratus (Mocsáry, 1889) = Pseudomalus meridianus Strumia, 1996, syn. nov.. One species is revalidated: Holopyga turkestanica Mocsáry, 1909, stat. resurr.. New status is proposed for: Pseudomalus cupratus (Mocsáry, 1889), stat. nov.. New combination is proposed for: Hedychridium amoenum (Mocsáry, 1911), comb. nov.. The reversal of priority is proposed for: Ellampus biaccinctus du Buysson, 1893, nomen protectum, and E. auratus var. gasperinii Mocsáry, 1889, nomen oblitum. New name is proposed for: Chrysis fusca Rosa, nom. nov. pro Chrysis ignita var. infuscata Mocsáry, 1889 nec Brullé, 1846. Pictures of eighty-nine type specimens are also provided.

Creation of a retrospective job-exposure matrix using surrogate measures of exposure for a cohort of US career firefighters from San Francisco, Chicago and Philadelphia.

Science.gov (United States)

Dahm, Matthew M; Bertke, Stephen; Allee, Steve; Daniels, Robert D

2015-09-01

To construct a cohort-specific job-exposure matrix (JEM) using surrogate metrics of exposure for a cancer study on career firefighters from the Chicago, Philadelphia and San Francisco Fire Departments. Departmental work history records, along with data on historical annual fire-runs and hours, were collected from 1950 to 2009 and coded into separate databases. These data were used to create a JEM based on standardised job titles and fire apparatus assignments using several surrogate exposure metrics to estimate firefighters' exposure to the combustion byproducts of fire. The metrics included duration of exposure (cumulative time with a standardised exposed job title and assignment), fire-runs (cumulative events of potential fire exposure) and time at fire (cumulative hours of potential fire exposure). The JEM consisted of 2298 unique job titles alongside 16,174 fire apparatus assignments from the three departments, which were collapsed into 15 standardised job titles and 15 standardised job assignments. Correlations were found between fire-runs and time at fires (Pearson coefficient=0.92), duration of exposure and time at fires (Pearson coefficient=0.85), and duration of exposure and fire-runs (Pearson coefficient=0.82). Total misclassification rates were found to be between 16-30% when using duration of employment as an exposure surrogate, which has been traditionally used in most epidemiological studies, compared with using the duration of exposure surrogate metric. The constructed JEM successfully differentiated firefighters based on gradient levels of potential exposure to the combustion byproducts of fire using multiple surrogate exposure metrics. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A retrospective analysis of noise-induced hearing loss in the Dutch construction industry

NARCIS (Netherlands)

Leensen, M. C. J.; Van Duivenbooden, J. C.; Dreschler, W. A.

2011-01-01

Purpose Noise exposure is an important and highly prevalent occupational hazard in the construction industry. This study examines hearing threshold levels of a large population of Dutch construction workers and compares their hearing thresholds to those predicted by ISO-1999. Methods In this

Greenroads : a sustainability performance metric for roadway design and construction.

Science.gov (United States)

2009-11-01

Greenroads is a performance metric for quantifying sustainable practices associated with roadway design and construction. Sustainability is defined as having seven key components: ecology, equity, economy, extent, expectations, experience and exposur...

Maternal Risk Exposure and Adult Daughters’ Health, Schooling, and Employment: A Constructed Cohort Analysis of 50 Developing Countries

Science.gov (United States)

Li, Qingfeng; Tsui, Amy O.

2016-01-01

This study analyzes the relationships between maternal risk factors present at the time of daughters’ births—namely, young mother, high parity, and short preceding birth interval—and their subsequent adult developmental, reproductive, and socioeconomic outcomes. Pseudo-cohorts are constructed using female respondent data from 189 cross-sectional rounds of Demographic and Health Surveys conducted in 50 developing countries between 1986 and 2013. Generalized linear models are estimated to test the relationships and calculate cohort-level outcome proportions with the systematic elimination of the three maternal risk factors. The simulation exercise for the full sample of 2,546 pseudo-cohorts shows that the combined elimination of risk exposures is associated with lower mean proportions of adult daughters experiencing child mortality, having a small infant at birth, and having a low body mass index. Among sub-Saharan African cohorts, the estimated changes are larger, particularly for years of schooling. The pseudo-cohort approach can enable longitudinal testing of life course hypotheses using large-scale, standardized, repeated cross-sectional data and with considerable resource efficiency. PMID:27154342

Maternal Risk Exposure and Adult Daughters' Health, Schooling, and Employment: A Constructed Cohort Analysis of 50 Developing Countries.

Science.gov (United States)

Li, Qingfeng; Tsui, Amy O

2016-06-01

This study analyzes the relationships between maternal risk factors present at the time of daughters' births-namely, young mother, high parity, and short preceding birth interval-and their subsequent adult developmental, reproductive, and socioeconomic outcomes. Pseudo-cohorts are constructed using female respondent data from 189 cross-sectional rounds of Demographic and Health Surveys conducted in 50 developing countries between 1986 and 2013. Generalized linear models are estimated to test the relationships and calculate cohort-level outcome proportions with the systematic elimination of the three maternal risk factors. The simulation exercise for the full sample of 2,546 pseudo-cohorts shows that the combined elimination of risk exposures is associated with lower mean proportions of adult daughters experiencing child mortality, having a small infant at birth, and having a low body mass index. Among sub-Saharan African cohorts, the estimated changes are larger, particularly for years of schooling. The pseudo-cohort approach can enable longitudinal testing of life course hypotheses using large-scale, standardized, repeated cross-sectional data and with considerable resource efficiency.

Engineering control technologies to reduce occupational silica exposures in masonry cutting and tuckpointing.

Science.gov (United States)

Meeker, John D; Cooper, Michael R; Lefkowitz, Daniel; Susi, Pam

2009-01-01

A number of tasks in construction generate worker overexposures to respirable crystalline silica dust, which is a significant contributor to occupational mortality and morbidity. This study evaluated the performance of commercially available engineering controls used in dusty construction tasks commonly performed by bricklayers. Local exhaust ventilation (LEV) controls for a portable abrasive cutter and for tuckpointing grinders were examined at a bricklayers' training center, as were two stationary wet saws. Personal breathing zone air samples were collected with and without the use of LEV or water suppression during simulated concrete block cutting, brick cutting, and tuckpointing. Compared with the use of no exposure control during block and brick cutting, the portable LEV unit significantly reduced mean respirable quartz exposures by 96% for block cutting and 91% for brick cutting (p controls (p control and no-control scenarios. These reductions with commercially available off-the-shelf tools demonstrate the effectiveness of engineering control interventions to reduce crystalline silica exposures in construction. Strategies to further improve control performance and approaches for increasing control interventions in construction are needed.

Environmental exposure to asbestos: from geology to mesothelioma.

Science.gov (United States)

Bayram, Mehmet; Bakan, Nur Dilek

2014-05-01

This article aims to review the geological background of environmental asbestos exposure and the distribution of asbestos-related disease (ARD) in association with naturally occurring asbestos (NOA), and discusses the potential health risks associated with exposure to non-occupational asbestos. With the motion of continental and oceanic plates, in some parts of the world serpentinites in the lower layer of the oceanic plate move into the continental plate and form the so-called ophiolites. Ophiolites consist of soil and rocks containing serpentine-type asbestos. There is an increase in ARDs in regions close to ophiolites. Indoor exposure and outdoor exposure to NOA, outdoor exposure to industrial asbestos and mines, urbanization and construction works in NOA regions are the known sources and types of environmental asbestos exposure. Although there is an expectance of decline in ARDs caused by industrial exposure to asbestos, the environmental exposure to asbestos is still a challenge waiting to be overcome.

Measurements of Small Exposures of Gamma Radiation with CaSO{sub 4}:Mn Radiothermoluminescence

Energy Technology Data Exchange (ETDEWEB)

Bjaerngard, Bengt

1963-08-15

A system for measurements of small exposures of gamma radiation using CaSO{sub 4}:Mn thermoluminescence has been developed. The construction and performance of a read-out apparatus is described as well as the construction and characteristics of a simple dosimeter. The reproducibility of the method at various exposures is estimated. 20 {mu}R of 1 MeV gamma radiation can be measured with a reproducibility within {+-} 50 % (standard deviation)

Climate, soil texture, and soil types affect the contributions of fine-fraction-stabilized carbon to total soil organic carbon in different land uses across China.

Science.gov (United States)

Cai, Andong; Feng, Wenting; Zhang, Wenju; Xu, Minggang

2016-05-01

Mineral-associated organic carbon (MOC), that is stabilized by fine soil particles (i.e., silt plus clay, organic carbon (SOC) persistence and sequestration, due to its large contribution to total SOC (TSOC) and long turnover time. Our objectives were to investigate how climate, soil type, soil texture, and agricultural managements affect MOC contributions to TSOC in China. We created a dataset from 103 published papers, including 1106 data points pairing MOC and TSOC across three major land use types: cropland, grassland, and forest. Overall, the MOC/TSOC ratio ranged from 0.27 to 0.80 and varied significantly among soil groups in cropland, grassland, and forest. Croplands and forest exhibited significantly higher median MOC/TSOC ratios than in grassland. Moreover, forest and grassland soils in temperate regions had higher MOC/TSOC ratios than in subtropical regions. Furthermore, the MOC/TSOC ratio was much higher in ultisol, compared with the other soil types. Both the MOC content and MOC/TSOC ratio were positively correlated with the amount of fine fraction (silt plus clay) in soil, highlighting the importance of soil texture in stabilizing organic carbon across various climate zones. In cropland, different fertilization practices and land uses (e.g., upland, paddy, and upland-paddy rotation) significantly altered MOC/TSOC ratios, but not in cropping systems (e.g., mono- and double-cropping) characterized by climatic differences. This study demonstrates that the MOC/TSOC ratio is mainly driven by soil texture, soil types, and related climate and land uses, and thus the variations in MOC/TSOC ratios should be taken into account when quantitatively estimating soil C sequestration potential of silt plus clay particles on a large scale. Copyright © 2016 Elsevier Ltd. All rights reserved.

Exposure to Local Homicides and Early Educational Achievement in Mexico

Science.gov (United States)

Caudillo, Mónica L.; Torche, Florencia

2014-01-01

We investigate the effect of children's exposure to local violence on grade failure in Mexico. We construct an annual panel of all elementary schools from 1990 to 2010 and merge municipality-level homicide rates to analyze the effect of exposure to local homicide. Using a variety of causal inference techniques, we consistently find that exposure…

Realization of method of characteristics based on customization of AutoCAD

International Nuclear Information System (INIS)

Chen Qichang; Wu Hongchun; Cao Liangzhi

2009-01-01

The method of characteristics (MOC) solves the neutron transport equation along each characteristics line. Theoretically, it is independent of the geometry shape of boundary and region. However, the geometry should be described, and ray tracing should be carried out firstly. In most of the existing MOC codes, the geometry description and ray tracing still have more or less limitation. To wipe off these geometry limitations for using MOC in more complex fuel assembly calculation, a new MOC code AutoMOC based on the customization of AutoCAD was developed. The numerical results show that AutoMOC not only has high flexibility in geometry but also gives accurate solutions in comparison with state-of-the-art methodologies. (authors)

Sun safety in construction: a U.K. intervention study.

Science.gov (United States)

Houdmont, J; Madgwick, P; Randall, R

2016-01-01

Interventions to promote sun safety in the U.K. construction sector are warranted given the high incidence of skin cancer attributable to sun exposure relative to other occupational groups. To evaluate change in sun safety knowledge and practices among construction workers in response to an educational intervention. A baseline questionnaire was administered, followed by a bespoke sector-specific DVD-based intervention. At 12-month follow-up, participants completed a further questionnaire. Analyses were conducted on a sample of 120 workers (intervention group, n = 70; comparison group, n = 50). At follow-up, the proportion of intervention group participants that reported correct sun safety knowledge was not significantly greater than at baseline. However, the intervention group demonstrated significant positive change on 9 out of 10 behavioural measures, the greatest change being use of a shade/cover when working in the sun followed by regularly checking skin for moles or unusual changes. Exposure to this intervention was linked to some specific positive changes in construction workers' self-reported sun safety practices. These findings highlight the potential for educational interventions to contribute to tackling skin cancer in the UK construction sector. The findings support the development of bespoke educational interventions for other high-risk outdoor worker groups. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Dose construction for vegetable ingestion exposure in Hong Kong

International Nuclear Information System (INIS)

Lui, W.S.; Walton, A.; Yeung, M.R.

1997-01-01

The author presents the mathematical model TERRA used for the construction of ingestion doses resulting from the consumption of contaminated vegetables during a nuclear accident in Hong Kong. Using the ground surface deposited radionuclide densities as input, TERRA calculates the concentrations of 54 radionuclides on the surfaces and within the tissue of vegetables as a function of time and the radiation doses delivered to the various vital organs following their consumption by humans. The present model provides a convenient tool to determine the time histories of 54 radionuclides in vegetables and to back track or project the ingestion dose after a major accident such that more appropriate and timely countermeasures can be implemented

Nová moc matek a stará moc otců

Czech Academy of Sciences Publication Activity Database

Radimská, Radka

2004-01-01

Roč. 4, č. 1 (2004), s. 3-4 ISSN 1213-0028 R&D Projects: GA AV ČR IBS7028002 Institutional research plan: CEZ:AV0Z7028912 Keywords : power relations * family * father Subject RIV: AO - Sociology, Demography

Use of nanomaterials in the European construction industry and some occupational health aspects thereof

Science.gov (United States)

van Broekhuizen, Pieter; van Broekhuizen, Fleur; Cornelissen, Ralf; Reijnders, Lucas

2011-02-01

In the European construction industry in 2009, the use of engineered nanoparticles appears to be confined to a limited number of products, predominantly coatings, cement and concrete. A survey among representatives of workers and employers from 14 EU countries suggests a high level of ignorance about the availability and use of nanomaterials for the construction industry and the safety aspects thereof. Barriers for a large-scale acceptance of products containing engineered nanoparticles (nanoproducts) are high costs, uncertainties about long-term technical material performance, as well as uncertainties about health risks of nanoproducts. Workplace measurements suggest a modest exposure of construction workers to nanoparticles (NPs) associated with the use of nanoproducts. The measured particles were within a size range of 20-300 nm, with the median diameter below 53 nm. Positive assignment of this exposure to the nanoproduct or to additional sources of ultrafine particles, like the electrical equipment used was not possible within the scope of this study and requires further research. Exposures were below the nano reference values proposed on the basis of a precautionary approach.

Use of nanomaterials in the European construction industry and some occupational health aspects thereof

International Nuclear Information System (INIS)

Broekhuizen, Pieter van; Broekhuizen, Fleur van; Cornelissen, Ralf; Reijnders, Lucas

2011-01-01

In the European construction industry in 2009, the use of engineered nanoparticles appears to be confined to a limited number of products, predominantly coatings, cement and concrete. A survey among representatives of workers and employers from 14 EU countries suggests a high level of ignorance about the availability and use of nanomaterials for the construction industry and the safety aspects thereof. Barriers for a large-scale acceptance of products containing engineered nanoparticles (nanoproducts) are high costs, uncertainties about long-term technical material performance, as well as uncertainties about health risks of nanoproducts. Workplace measurements suggest a modest exposure of construction workers to nanoparticles (NPs) associated with the use of nanoproducts. The measured particles were within a size range of 20–300 nm, with the median diameter below 53 nm. Positive assignment of this exposure to the nanoproduct or to additional sources of ultrafine particles, like the electrical equipment used was not possible within the scope of this study and requires further research. Exposures were below the nano reference values proposed on the basis of a precautionary approach.

Development and validation of a job exposure matrix for physical risk factors in low back pain.

Science.gov (United States)

Solovieva, Svetlana; Pehkonen, Irmeli; Kausto, Johanna; Miranda, Helena; Shiri, Rahman; Kauppinen, Timo; Heliövaara, Markku; Burdorf, Alex; Husgafvel-Pursiainen, Kirsti; Viikari-Juntura, Eira

2012-01-01

The aim was to construct and validate a gender-specific job exposure matrix (JEM) for physical exposures to be used in epidemiological studies of low back pain (LBP). We utilized two large Finnish population surveys, one to construct the JEM and another to test matrix validity. The exposure axis of the matrix included exposures relevant to LBP (heavy physical work, heavy lifting, awkward trunk posture and whole body vibration) and exposures that increase the biomechanical load on the low back (arm elevation) or those that in combination with other known risk factors could be related to LBP (kneeling or squatting). Job titles with similar work tasks and exposures were grouped. Exposure information was based on face-to-face interviews. Validity of the matrix was explored by comparing the JEM (group-based) binary measures with individual-based measures. The predictive validity of the matrix against LBP was evaluated by comparing the associations of the group-based (JEM) exposures with those of individual-based exposures. The matrix includes 348 job titles, representing 81% of all Finnish job titles in the early 2000s. The specificity of the constructed matrix was good, especially in women. The validity measured with kappa-statistic ranged from good to poor, being fair for most exposures. In men, all group-based (JEM) exposures were statistically significantly associated with one-month prevalence of LBP. In women, four out of six group-based exposures showed an association with LBP. The gender-specific JEM for physical exposures showed relatively high specificity without compromising sensitivity. The matrix can therefore be considered as a valid instrument for exposure assessment in large-scale epidemiological studies, when more precise but more labour-intensive methods are not feasible. Although the matrix was based on Finnish data we foresee that it could be applicable, with some modifications, in other countries with a similar level of technology.

Ultra-low-energy wide electron exposure unit

International Nuclear Information System (INIS)

Yonago, Akinobu; Oono, Yukihiko; Tokunaga, Kazutoshi; Kishimoto, Junichi; Wakamoto, Ikuo

2001-01-01

Heat and ultraviolet ray processes are used in surface dryness of paint, surface treatment of construction materials and surface sterilization of food containers. A process using a low-energy wide-area electron beam (EB) has been developed that features high speed and low drive cost. EB processing is not widespread in general industry, however, due to high equipment cost and difficult maintenance. We developed an ultra-low-energy wide-area electron beam exposure unit, the Mitsubishi Wide Electron Exposure Unit (MIWEL) to solve these problems. (author)

A Tubular Biomaterial Construct Exhibiting a Negative Poisson's Ratio.

Directory of Open Access Journals (Sweden)

Jin Woo Lee

Full Text Available Developing functional small-diameter vascular grafts is an important objective in tissue engineering research. In this study, we address the problem of compliance mismatch by designing and developing a 3D tubular construct that has a negative Poisson's ratio νxy (NPR. NPR constructs have the unique ability to expand transversely when pulled axially, thereby resulting in a highly-compliant tubular construct. In this work, we used projection stereolithography to 3D-print a planar NPR sheet composed of photosensitive poly(ethylene glycol diacrylate biomaterial. We used a step-lithography exposure and a stitch process to scale up the projection printing process, and used the cut-missing rib unit design to develop a centimeter-scale NPR sheet, which was rolled up to form a tubular construct. The constructs had Poisson's ratios of -0.6 ≤ νxy ≤ -0.1. The NPR construct also supports higher cellular adhesion than does the construct that has positive νxy. Our NPR design offers a significant advance in the development of highly-compliant vascular grafts.

Task exposures in an office environment: a comparison of methods.

Science.gov (United States)

Van Eerd, Dwayne; Hogg-Johnson, Sheilah; Mazumder, Anjali; Cole, Donald; Wells, Richard; Moore, Anne

2009-10-01

Task-related factors such as frequency and duration are associated with musculoskeletal disorders in office settings. The primary objective was to compare various task recording methods as measures of exposure in an office workplace. A total of 41 workers from different jobs were recruited from a large urban newspaper (71% female, mean age 41 years SD 9.6). Questionnaire, task diaries, direct observation and video methods were used to record tasks. A common set of task codes was used across methods. Different estimates of task duration, number of tasks and task transitions arose from the different methods. Self-report methods did not consistently result in longer task duration estimates. Methodological issues could explain some of the differences in estimates seen between methods observed. It was concluded that different task recording methods result in different estimates of exposure likely due to different exposure constructs. This work addresses issues of exposure measurement in office environments. It is of relevance to ergonomists/researchers interested in how to best assess the risk of injury among office workers. The paper discusses the trade-offs between precision, accuracy and burden in the collection of computer task-based exposure measures and different underlying constructs captures in each method.

Expanding Educators' Contributions to Continuous Quality Improvement of American Board of Medical Specialties Maintenance of Certification.

Science.gov (United States)

Nora, Lois Margaret; Pouwels, Mellie Villahermosa; Irons, Mira

2016-01-01

The American Board of Medical Specialties board certification has transformed into a career-long process of learning, assessment, and performance improvement through its Program for Maintenance of Certification (MOC). Medical educators across many medical professional organizations, specialty societies, and other institutions have played important roles in shaping MOC and tailoring its overarching framework to the needs of different specialties. This Commentary addresses potential barriers to engagement in work related to MOC for medical school (MS) and academic health center (AHC) educators and identifies reasons for, and ways to accomplish, greater involvement in this work. The authors present ways that medical and other health professions educators in these settings can contribute to the continuous improvement of the MOC program including developing educational and assessment activities, engaging in debate about MOC, linking MOC with institutional quality improvement activities, and pursuing MOC-related scholarship. MS- and AHC-based educators have much to offer this still-young and continually improving program, and their engagement is sought, necessary, and welcomed.

29 CFR 1926.52 - Occupational noise exposure.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Occupational noise exposure. 1926.52 Section 1926.52 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Occupational Health and Environmental Controls...

Maintenance of Certification Part 4 Credit and recruitment for practice-based research.

Science.gov (United States)

Gorzkowski, Julie A; Klein, Jonathan D; Harris, Donna L; Kaseeska, Kristen R; Whitmore Shaefer, Regina M; Bocian, Alison B; Davis, James B; Gotlieb, Edward M; Wasserman, Richard C

2014-10-01

Competing priorities in pediatric practice have created challenges for practice-based research. To increase recruitment success, researchers must design studies that provide added value to participants. This study evaluates recruitment of pediatricians into a study, before and after the development and addition of a quality improvement (QI) curriculum approved for American Board of Pediatrics Maintenance of Certification (MOC) Part 4 Credit as an enrollment incentive. Researchers implemented multiple outreach methods to enroll pediatric practices over 28 months. Field note review revealed that many physicians declined enrollment, stating that they prioritized MOC Part 4 projects over research studies. A QI curriculum meeting standards for MOC Part 4 Credit was developed and added to the study protocol as an enrollment incentive. Enrollment rates and characteristics of practitioners enrolled pre- and post-MOC were compared. Pre-MOC enrollment contributed 48% of practices in 22 months; post-MOC enrollment contributed 49% of practices in 6 months. An average of 3.5 practices enrolled per month pre-MOC, compared with 13.1 per month post-MOC (P recruitment success and increased enrollment of pediatricians working in underserved areas. Including QI initiatives meeting MOC Part 4 criteria in practice-based research protocols may enhance participation and aid in recruiting diverse practice and patient populations. Copyright © 2014 by the American Academy of Pediatrics.

Atlantic multidecadal oceanic variability and its influence on the atmosphere in a climate model

Energy Technology Data Exchange (ETDEWEB)

Msadek, Rym; Frankignoul, Claude [Universite Pierre et Marie Curie, Paris 6, LOCEAN/IPSL, Paris (France)

2009-07-15

The mechanisms controlling the decadal to multidecadal variability of the Atlantic Meridional Overturning Circulation (MOC) and its influence on the atmosphere are investigated using a control simulation with the IPSL-CM4 climate model. The multidecadal fluctuations of the MOC are mostly driven by deep convection in the subpolar gyre, which occurs south of Iceland in the model. The latter is primarily influenced by the anomalous advection of salinity due to changes in the East Atlantic Pattern (EAP), which is the second mode of atmospheric variability in the North Atlantic region. The North Atlantic Oscillation is the dominant mode, but it plays a secondary role in the MOC fluctuations. During summer, the MOC variability is shown to have a significant impact on the atmosphere in the North Atlantic-European sector. The MOC influence is due to an interhemispheric sea surface temperature (SST) anomaly with opposite signs in the two hemispheres but largest amplitude in the northern one. The SST pattern driven by the MOC mostly resembles the model Atlantic Multidecadal Oscillation (AMO) and bears some similarity with the observed one. It is shown that the AMO reflects both the MOC influence and the local atmospheric forcing. Hence, the MOC influence on climate is best detected using lagged relations between climatic fields. The atmospheric response resembles the EAP, in a phase that might induce a weak positive feedback on the MOC. (orig.)

Antioxidant Activity of the Essential Oil and its Major Terpenes of Satureja macrostema (Moc. and Sessé ex Benth.) Briq.

Science.gov (United States)

Torres-Martínez, Rafael; García-Rodríguez, Yolanda Magdalena; Ríos-Chávez, Patricia; Saavedra-Molina, Alfredo; López-Meza, Joel Edmundo; Ochoa-Zarzosa, Alejandra; Garciglia, Rafael Salgado

2018-01-01

The aim of this study was to investigate the in vitro antioxidant activity of Satureja macrostema (Moc. and Sessé ex Benth.) Briq. (Lamiaceae) essential oil, a Mexican medicinal plant known as nurite. Fresh aerial parts of S. macrostema plants cultivated in greenhouse for 3 months were subjected to hydrodistillation in a Clevenger apparatus to obtain essential oil. Volatile compounds were identified by gas chromatography (GC) and GC/mass spectrometry. Antioxidant effectiveness of essential oil and its major terpenes of S. macrostema was examined by three different radical scavenging methods: 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS), and total antioxidant capacity (TAC). The concentrations tested were 0.001, 0.01, 0.1, and 1 mg/mL. The major volatile compounds were caryophyllene, limonene, linalool, pulegone, menthone, and thymol. S. macrostema essential oil showed the highest free radical scavenging activity with DPPH and ABTS methods (53.10% and 92.12%, respectively) at 1 mg/mL and 98% with TAC method at 0.1 mg/mL. Thymol exerted the highest antioxidant capacity with 0.1 mg/mL, reaching 83.38%, 96.96%, and 98.57% by DPPH, ABTS, and TAC methods. Caryophyllene, limonene, linalool, pulegone, and menthone exhibited an antioxidant capacity essential oil of S. macrostema and thymol showed a free radical scavenging activity close to that of the synthetic butylated hydroxytoluene. The major volatile compounds of essential oil of Satureja macrostema were caryophyllene, limonene, linalool, pulegone, menthone and thymolThe essential oil of S. macrostema showed a high free radical scavengingThymol exerted the highest antioxidant capacity by DPPH, ABTS and TAC methods. Abbreviations used: GC: Gas Chromatography; DPPH: 2,2-diphenyl-1-picrylhydrazyl; ABTS: 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid; TAC: Total antioxidant capacity.

The impact of resolution on the adjustment and decadal variability of the Atlantic meridional overturning circulation in a coupled climate model

Energy Technology Data Exchange (ETDEWEB)

Hodson, Daniel L.R.; Sutton, Rowan T. [University of Reading, NCAS-Climate, Department of Meteorology, Earley Gate, PO Box 243, Reading (United Kingdom)

2012-12-15

Variations in the Atlantic meridional overturning circulation (MOC) exert an important influence on climate, particularly on decadal time scales. Simulation of the MOC in coupled climate models is compromised, to a degree that is unknown, by their lack of fidelity in resolving some of the key processes involved. There is an overarching need to increase the resolution and fidelity of climate models, but also to assess how increases in resolution influence the simulation of key phenomena such as the MOC. In this study we investigate the impact of significantly increasing the (ocean and atmosphere) resolution of a coupled climate model on the simulation of MOC variability by comparing high and low resolution versions of the same model. In both versions, decadal variability of the MOC is closely linked to density anomalies that propagate from the Labrador Sea southward along the deep western boundary. We demonstrate that the MOC adjustment proceeds more rapidly in the higher resolution model due the increased speed of western boundary waves. However, the response of the Atlantic sea surface temperatures to MOC variations is relatively robust - in pattern if not in magnitude - across the two resolutions. The MOC also excites a coupled ocean-atmosphere response in the tropical Atlantic in both model versions. In the higher resolution model, but not the lower resolution model, there is evidence of a significant response in the extratropical atmosphere over the North Atlantic 6 years after a maximum in the MOC. In both models there is evidence of a weak negative feedback on deep density anomalies in the Labrador Sea, and hence on the MOC (with a time scale of approximately ten years). Our results highlight the need for further work to understand the decadal variability of the MOC and its simulation in climate models. (orig.)

Constructive remodeling of biologic scaffolds is dependent on early exposure to physiologic bladder filling in a canine partial cystectomy model.

Science.gov (United States)

Boruch, Alan V; Nieponice, Alejandro; Qureshi, Irfan R; Gilbert, Thomas W; Badylak, Stephen F

2010-06-15

removed 8 wk earlier. These findings show that early exposure of site-appropriate mechanical loading (i.e., bladder filling) mediates a constructive remodeling response after ECM repair in a canine partial cystectomy model. Copyright 2010 Elsevier Inc. All rights reserved.

Submicron particle monitoring of paving and related road construction operations.

Science.gov (United States)

Freund, Alice; Zuckerman, Norman; Baum, Lisa; Milek, Debra

2012-01-01

This study identified activities and sources that contribute to ultrafine and other submicron particle exposure that could trigger respiratory symptoms in highway repair workers. Submicron particle monitoring was conducted for paving, milling, and pothole repair operations in a major metropolitan area where several highway repair workers were identified as symptomatic for respiratory illness following exposures at the 2001 World Trade Center disaster site. Exposure assessments were conducted for eight trades involved in road construction using a TSI P-Trak portable condensation particle counter. Direct readings near the workers' breathing zones and observations of activities and potential sources were logged on 7 days on 27 workers using four different models of pavers and two types of millers. Average worker exposure levels ranged from 2 to 3 times background during paving and from 1 to 4 times background during milling. During asphalt paving, average personal exposures to submicron particulates were 25,000-60,000, 28,000-70,000, and 23,000-37,000 particles/ cm(3) for paver operators, screed operators, and rakers, respectively. Average personal exposures during milling were 19,000-111,000, 28,000-81,000, and 19,000 particles/cm(3) for the large miller operators, miller screed operators, and raker, respectively. Personal peak exposures were measured up to 467,000 and 455,000 particles/cm(3) in paving and milling, respectively. Several sources of submicron particles were identified. These included the diesel and electric fired screed heaters; engine exhaust from diesel powered construction vehicles passing by or idling; raking, dumping, and paving of asphalt; exhaust from the hotbox heater; pavement dust or fumes from milling operations, especially when the large miller started and stopped; and secondhand cigarette smoke. To reduce the potential for health effects in workers, over 40 recommendations were made to control exposures, including improved maintenance of

The Fee Sensitive Risk Exposures of Project Authorized Person in Hong Kong

Directory of Open Access Journals (Sweden)

Sai-On Cheung

2012-11-01

Full Text Available Authorized Persons (AP play a critical role in the design and construction of building works in Hong Kong. Under the Building Ordinance, design and construction of building works need to be coordinated and monitored by an AP registered with the Buildings Department. Professionally qualified Architects, Engineers and Surveyors are eligible to register as AP after completing the prescribed assessment. In addition, the project AP is often appointed by the project owner to be the project team leader. In these capacities, a project AP is exposed to various risks. This paper seeks to identify the fee sensitive risk exposures of project APs. Through an ANOVA study, these risks exposures are those due to liabilities under the Building Ordinance at the construction stage, those towards the third parties and the clients.

Experimental setup for radon exposure and first diffusion studies using gamma spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Maier, Andreas, E-mail: a.maier@gsi.de [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Beek, Patrick van [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Technical University Darmstadt, Hochschulstraße 6, 64289 Darmstadt (Germany); Hellmund, Johannes [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Durante, Marco [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Technical University Darmstadt, Hochschulstraße 6, 64289 Darmstadt (Germany); Schardt, Dieter; Kraft, Gerhard; Fournier, Claudia [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany)

2015-11-01

In order to measure the uptake and diffusion of {sup 222}Rn in biological material, an exposure chamber was constructed where cell cultures, biological tissues and mice can be exposed to {sup 222}Rn-activities similar to therapy conditions. After exposure, the material is transferred to a gamma spectrometer and the decay of {sup 214}Pb and {sup 214}Bi is analyzed. From the time kinetics of these decays the total amount of the initial {sup 222}Rn concentration can be calculated. In this paper the design and construction as well as first test measurements are reported.

Occupational safety issues in residential construction surveyed in Wisconsin, United States.

Science.gov (United States)

Choi, Sang D; Carlson, Kathryn

2014-01-01

Residential construction is a high-risk industry in the U.S. due to the exposure to work-related safety hazards and fall injuries. This study aimed to examine the safety training and safe work practices of construction workers within the small residential construction industry. In order to achieve the study objectives, a survey was designed and sent to approximately 200 Wisconsin based residential construction contractors. About one third of the respondents stated that they did not have any form of safety programs. The study indicated that the most common types of work-related injuries in residential construction were slips/trips/falls and cuts/lacerations. The survey findings also suggested that the residential construction contractors needed to increase the utilization of fall protection safety equipment. Further education and subject matter expert training could provide benefits to improve occupational safety and health of the small business workforce in the residential construction industry.

Thermodynamic investigation of lime-enhanced molybdenite reduction using methane-containing gases

International Nuclear Information System (INIS)

Najafabadi, Samad Ghasemi; Abbasi, Mohammad Hasan; Saidi, Ali

2010-01-01

Lime-enhanced molybdenite reduction (LEMR) with methane-containing gases has been thermodynamically studied. The reaction proceeds through the direct oxidation of MoS 2 by CaO to form intermediate molybdenum oxidized species, MoO 2 and CaMoO 4 . The thermodynamics of Mo-O-C-H and Mo-Ca-O-C-H systems has been investigated instead of Mo-Ca-S-O-C-H system, as the sulfur is captured by calcium and forms a neutral compound (i.e. calcium sulfide). The role of reducing agent is the reduction of these oxidized species. Reduction of oxidized species by methane will yield Mo, Mo 2 C or MoC. The thermodynamic investigation resulted in construction of stability diagrams of molybdenum compounds. These diagrams were constructed for CH 4 -H 2 , CH 4 -H 2 -Ar and CH 4 -CO 2 -H 2 O gas mixtures. In addition to stability regions of Mo, Mo 2 C and MoC, the carbon deposition area was also identified. The results showed that by using appropriate gas composition and temperature, different molybdenum-containing phases would be stable thermodynamically while soot formation can be avoided.

[Mesothelioma in construction workers: risk estimate, lung content of asbestos fibres, claims for compensation for occupational disease in the Veneto Region mesothelioma register].

Science.gov (United States)

Merler, E; Bressan, Vittoria; Somigliana, Anna

2009-01-01

Work in the construction industry is causing the highest number of mesotheliomas among the residents of the Veneto Region (north-east Italy, 4,5 million inhabitants). To sum up the results on occurrence, asbestos exposure, lung fibre content analyses, and compensation for occupational disease. Case identification and asbestos exposure classification: active search of mesotheliomas that were diagnosed via histological or cytological examinations occurring between 1987 and 2006; a probability of asbestos exposure was attributed to each case, following interviews with the subjects or their relatives and collection of data on the jobs held over their lifetime. Risk estimate among construction workers: the ratio between cases and person-years, the latter derived from the number of construction workers reported by censuses. Lung content of asbestos fibres: examination of lung specimens by Scanning Electron Microscope to determine number and type of fibres. Claims for compensation and compensation awarded: data obtained from the National Institute for Insurance against Occupational Diseases available for the period 1999-2006. of 952 mesothelioma cases classified as due to asbestos exposure, 251 were assigned to work in the construction industry (21 of which due to domestic of environmental exposures), which gives a rate of 4.1 (95% CI 3.6-4.8) x 10(5) x year among construction workers. The asbestos fibre content detected in the lungs of 11 construction workers showed a mean of 1.7 x 10(6) fibres/g dry tissue (range 350,000-3 million) for fibres > 1 micro, almost exclusively due to amphibole fibres. 62% of the claims for compensation were granted but the percentage fell to less than 40% when claims were submitted by a relative, after the death of the subject. The prevalence of mesothelioma occurring among construction workers is high and is associated with asbestos exposure; the risk is underestimated by the subjects and their relatives. All mesotheliomas occurring among

Medial olivocochlear reflex interneurons are located in the posteroventral cochlear nucleus: a kainic acid lesion study in guinea pigs.

Science.gov (United States)

de Venecia, Ronald K; Liberman, M Charles; Guinan, John J; Brown, M Christian

2005-07-11

The medial olivocochlear (MOC) reflex arc is probably a three-neuron pathway consisting of type I spiral ganglion neurons, reflex interneurons in the cochlear nucleus, and MOC neurons that project to the outer hair cells of the cochlea. We investigated the identity of MOC reflex interneurons in the cochlear nucleus by assaying their regional distribution using focal injections of kainic acid. Our reflex metric was the amount of change in the distortion product otoacoustic emission (at 2f(1)-f(2)) just after onset of the primary tones. This metric for MOC reflex strength has been shown to depend on an intact reflex pathway. Lesions involving the posteroventral cochlear nucleus (PVCN), but not the other subdivisions, produced long-term decreases in MOC reflex strength. The degree of cell loss within the dorsal part of the PVCN was a predictor of whether the lesion affected MOC reflex strength. We suggest that multipolar cells within the PVCN have the distribution and response characteristics appropriate to be the MOC reflex interneurons. (c) 2005 Wiley-Liss, Inc.

Coagulation mechanism of salt solution-extracted active component in Moringa oleifera seeds.

Science.gov (United States)

Okuda, T; Baes, A U; Nishijima, W; Okada, M

2001-03-01

This study focuses on the coagulation mechanism by the purified coagulant solution (MOC-SC-PC) with the coagulation active component extracted from M. oleifera seeds using salt solution. The addition of MOC-SC-PC tap water formed insoluble matters. This formation was responsible for kaolin coagulation. On the other hand, insoluble matters were not formed when the MOC-SC-PC was added into distilled water. The formation was affected by Ca2+ or other bivalent cations which may connect each molecule of the active coagulation component in MOC-SC-PC and form a net-like structure. The coagulation mechanism of MOC-SC-PC seemed to be an enmeshment of Kaolin by the insoluble matters with the net-like structure. In case of Ca2+ ion (bivalent cations), at least 0.2 mM was necessary for coagulation at 0.3 mgC l-1 dose of MOC-SC-PC. Other coagulation mechanisms like compression of double layer, interparticle bridging or charge neutralization were not responsible for the coagulation by MOC-SC-PC.

Development and validation of a job exposure matrix for physical risk factors in low back pain.

Directory of Open Access Journals (Sweden)

Svetlana Solovieva

Full Text Available OBJECTIVES: The aim was to construct and validate a gender-specific job exposure matrix (JEM for physical exposures to be used in epidemiological studies of low back pain (LBP. MATERIALS AND METHODS: We utilized two large Finnish population surveys, one to construct the JEM and another to test matrix validity. The exposure axis of the matrix included exposures relevant to LBP (heavy physical work, heavy lifting, awkward trunk posture and whole body vibration and exposures that increase the biomechanical load on the low back (arm elevation or those that in combination with other known risk factors could be related to LBP (kneeling or squatting. Job titles with similar work tasks and exposures were grouped. Exposure information was based on face-to-face interviews. Validity of the matrix was explored by comparing the JEM (group-based binary measures with individual-based measures. The predictive validity of the matrix against LBP was evaluated by comparing the associations of the group-based (JEM exposures with those of individual-based exposures. RESULTS: The matrix includes 348 job titles, representing 81% of all Finnish job titles in the early 2000s. The specificity of the constructed matrix was good, especially in women. The validity measured with kappa-statistic ranged from good to poor, being fair for most exposures. In men, all group-based (JEM exposures were statistically significantly associated with one-month prevalence of LBP. In women, four out of six group-based exposures showed an association with LBP. CONCLUSIONS: The gender-specific JEM for physical exposures showed relatively high specificity without compromising sensitivity. The matrix can therefore be considered as a valid instrument for exposure assessment in large-scale epidemiological studies, when more precise but more labour-intensive methods are not feasible. Although the matrix was based on Finnish data we foresee that it could be applicable, with some modifications, in

Designing, Constructing and Installing a Local Exhaust Ventilation System to Minimize Welders\\' Exposure to Welding Fumes

Directory of Open Access Journals (Sweden)

Sajad Zare

2017-10-01

Full Text Available Background & Aims of the Study: Welder’s exposure to welding fumes can cause occupational diseases. The current study sought to examine exposure to welding fumes among welders who work in the repair shop of Sarcheshmeh Copper Complex and design a local exhaust ventilation system to control exposure to welding fumes. Materials & Methods: This applied analytical study was conducted in the summer of 2016 among welders working in the repair shop of Sarcheshmeh Copper Complex. The study comprised three phases; in the first one, welders’ exposure to welding fumes was assessed at the beginning of the study. After that, a local exhaust ventilation system was designed and installed in the aforementioned repair shop. In the final stage, welders’ exposure to welding fumes was assessed again after installation of the ventilation system. The procedure recommended by NIOSH (method number 7300 was used for individual sampling of welders. Results: Based on the obtained findings, before installing the ventilation system, welding technicians were exposed to 0.3 mg/m3 of copper fumes and 0.04 mg/m3 of chromium fumes. Journeyman welders were also exposed to 2.16 mg/m3 of manganese fumes, while stellar welders were exposed to 6.9 mg/m3 of iron fumes. In the light of these measurements, a local exhaust ventilation system was designed and installed. Subsequently, measurement of exposure to welding fumes showed a significant reduction. That is, welding technicians were exposed to 0.17 mg/m3 and 0.015 mg/m3 of copper and chromium fumes respectively. Additionally, journeyman welders were exposed to 0.86 mg/m3 of manganese fumes, whereas stellar welders were exposed to 4.3 mg/m3 of iron fumes. Conclusions: A comparison of standard limits of exposure to welding fumes and the results obtained from measurements in sampling stations before and after the installation of the local exhaust ventilation system reveals that this controlling measure was very effective in the

Investigations on the corrosion of constructional steels in different ...

African Journals Online (AJOL)

The corrosion behavior of three constructional steels used in Senegal, S235, S275 and S355, was studied in simulated atmospheric conditions in an exposure chamber above distilled water and above 3% NaCl solution representing marine atmosphere by comparing the ratio of rusted to unrusted area. Electrochemical test ...

Manganese Fractionation Using a Sequential Extraction Method to Evaluate Welders' Shielded Metal Arc Welding Exposures During Construction Projects in Oil Refineries.

Science.gov (United States)

Hanley, Kevin W; Andrews, Ronnee; Bertke, Steven; Ashley, Kevin

2015-01-01

The National Institute for Occupational Safety and Health has conducted an occupational exposure assessment study of manganese (Mn) in welding fume of construction workers rebuilding tanks, piping, and process equipment at two oil refineries. The objective of this study was to evaluate exposures to different Mn fractions using a sequential extraction procedure. Seventy-two worker-days were monitored for either total or respirable Mn during stick welding and associated activities both within and outside of confined spaces. The samples were analyzed using an experimental method to separate different Mn fractions by valence states based on selective chemical solubility. The full-shift total particulate Mn time-weighted average (TWA) breathing zone concentrations ranged from 0.013-29 for soluble Mn in a mild ammonium acetate solution; from 0.26-250 for Mn(0,2+) in acetic acid; from non-detectable (ND) - 350 for Mn(3+,4+) in hydroxylamine-hydrochloride; and from ND - 39 micrograms per cubic meter (μg/m(3)) for insoluble Mn fractions in hydrochloric and nitric acid. The summation of all Mn fractions in total particulate TWA ranged from 0.52-470 μg/m(3). The range of respirable particulate Mn TWA concentrations were from 0.20-28 for soluble Mn; from 1.4-270 for Mn(0,2+); from 0.49-150 for Mn(3+,4+); from ND - 100 for insoluble Mn; and from 2.0-490 μg/m(3) for Mn (sum of fractions). For all jobs combined, total particulate TWA GM concentrations of the Mn(sum) were 99 (GSD = 3.35) and 8.7 (GSD = 3.54) μg/m(3) for workers inside and outside of confined spaces; respirable Mn also showed much higher levels for welders within confined spaces. Regardless of particle size and confined space work status, Mn(0,2+) fraction was the most abundant followed by Mn(3+,4+) fraction, typically >50% and ∼30-40% of Mn(sum), respectively. Eighteen welders' exposures exceeded the ACGIH Threshold Limit Values for total Mn (100 μg/m(3)) and 25 exceeded the recently adopted respirable

The Australian Work Exposures Study: prevalence of occupational exposure to diesel engine exhaust.

Science.gov (United States)

Peters, Susan; Carey, Renee N; Driscoll, Timothy R; Glass, Deborah C; Benke, Geza; Reid, Alison; Fritschi, Lin

2015-06-01

Diesel engines are widely used in occupational settings. Diesel exhaust has been classified as a lung carcinogen, but data on number of workers exposed to different levels of diesel exhaust are not available in Australia. The aim of this study was to estimate the current prevalence of exposure to diesel engine exhaust in Australian workplaces. A cross-sectional survey of Australian males and females (18-65 years old) in current paid employment was undertaken. Information about the respondents' current job and various demographic factors was collected in a telephone interview using the web-based tool OccIDEAS. Semi-quantitative occupational exposure levels to diesel exhaust were assigned using programmed decision rules and numbers of workers exposed in Australia in 2011 were estimated. We defined substantial exposure as exposed at a medium or high level, for at least 5h per week. Substantial occupational exposure to diesel exhaust was experienced by 13.4% of the respondents in their current job. Exposure prevalence varied across states, ranging from 6.4% in the Australian Capital Territory to 17.0% in Western Australia. Exposures occurred mainly in the agricultural, mining, transport and construction industries, and among mechanics. Men (20.4%) were more often exposed than women (4.7%). Extrapolation to the total working population indicated that 13.8% (95% confidence interval 10.0-20.4) of the 2011 Australian workforce were estimated to be substantially exposed to diesel exhaust, and 1.8% of the workers were estimated to experience high levels of exposures in their current job. About 1.2 million Australian workers were estimated to have been exposed to diesel exhaust in their workplace in 2011. This is the first study to describe the prevalence of occupational diesel exhaust exposure in Australia and will enable estimation of the number of lung cancers attributable to diesel exhaust exposure in the workplace. © The Author 2015. Published by Oxford University Press

Airway disease in highway and tunnel construction workers exposed to silica.

Science.gov (United States)

Oliver, L Christine; Miracle-McMahill, Heidi

2006-12-01

Construction workers employed in a unique type of tunnel construction known as tunnel jacking were exposed over an 18-month period to respirable crystalline silica at concentrations that exceeded the OSHA permissible exposure limit. The present study examines workplace exposures and occurrence of airway disease in these workers. Medical and occupational histories and chest radiographs were obtained on 343 active construction workers who had worked on the site during the period in question. Chest radiographs were interpreted according to the ILO-1980 system of classification. Standardized questions were used to develop an algorithm to define symptoms consistent with asthma (SCA) and to determine these respiratory outcomes: chronic bronchitis, shortness of breath (SOB), and physician-diagnosed asthma (current vs. not current). Relationships with each of three work activities were examined: slurry wall breakthrough (SWB), chipping caisson overpour, and tunneling/mining. Participants included laborers, carpenters, tunnel workers, ironworkers, operating engineers, and electricians. No cases of silicosis were found on chest X-ray. Overall prevalence of chronic bronchitis, SCA, SOB, and physician-diagnosed asthma was 10.7%, 25%, 29%, and 6.6%, respectively. Odds ratios (OR) for carpenters compared to laborers were significantly elevated for chronic bronchitis, SCA, and SOB. SWB was associated with chronic bronchitis and SCA (OR 4.93, 95% CI = 1.01, 24.17; OR 3.32, 95% CI = 1.25, 8.84, respectively). The interaction between SWB, SCA, and trade was significant for carpenters (OR 6.87, 95% CI = 1.66, 28.39). Inverse trends were observed for months on the site and chronic bronchitis, SCA, and SOB (P = 0.0374, 0.0006, and 0.0307, respectively). Tunnel construction workers exposed to respirable crystalline silica and cement dust are at increased risk for airway disease. Extent of risk varies by trade and work activity. Our data indicate the importance of bystander exposures and

A hard x-ray prototype production exposure station at NSLS

International Nuclear Information System (INIS)

Johnson, E.D.; Milne, J.C.

1997-07-01

Exposures conducted at the NSLS R and D beamline (X-27B) for High Aspect Ratio Precision Manufacture have proven sufficiently successful that the authors are constructing a dedicated hard x-ray exposure beamline. The new beamline (X-14B) provides an exposure field ∼ 120 mm wide, three times larger than that of X-27B. The scanner is based on the hydraulic system from the X-27B program. It is optimized for planar exposures and takes advantage of the full 525 mm stroke available. Exposures of multiple substrates and masks will be possible, with the fixturing supporting mounting of substrate holders from other groups (ALS, APS, CAMD, and UW). The function of this beamline is to establish a hard x-ray exposure station where manufacturing scale protocols can be developed and ultimately exploited for production runs

The Prevalence of Selected Potentially Hazardous Workplace Exposures in the US: Findings From the 2010 National Health Interview Survey

Science.gov (United States)

Calvert, Geoffrey M.; Luckhaupt, Sara E.; Sussell, Aaron; Dahlhamer, James M.; Ward, Brian W.

2015-01-01

Objective Assess the national prevalence of current workplace exposure to potential skin hazards, secondhand smoke (SHS), and outdoor work among various industry and occupation groups. Also, assess the national prevalence of chronic workplace exposure to vapors, gas, dust, and fumes (VGDF) among these groups. Methods Data were obtained from the 2010 National Health Interview Survey (NHIS). NHIS is a multistage probability sample survey of the civilian non-institutionalized population of the US. Prevalence rates and their variances were calculated using SUDAAN to account for the complex NHIS sample design. Results The data for 2010 were available for 17,524 adults who worked in the 12 months that preceded interview. The highest prevalence rates of hazardous workplace exposures were typically in agriculture, mining, and construction. The prevalence rate of frequent handling of or skin contact with chemicals, and of non-smokers frequently exposed to SHS at work was highest in mining and construction. Outdoor work was most common in agriculture (85%), construction (73%), and mining (65%). Finally, frequent occupational exposure to VGDF was most common among mining (67%), agriculture (53%), and construction workers (51%). Conclusion We identified industries and occupations with the highest prevalence of potentially hazardous workplace exposures, and provided targets for investigation and intervention activities. PMID:22821700

Association between perceived present working conditions and demands versus attitude to early retirement among construction workers.

Science.gov (United States)

Jebens, Einar; Medbø, Jon I; Knutsen, Oddvar; Mamen, Asgeir; Veiersted, Kaj Bo

2014-01-01

Early retirement is an increasing problem in the construction industry. There is limited information about causes leading employees to leave working life early. We have compared construction workers present situation with their perception of future demands at work to avoid early retirement. All 87 employees in a medium-sized Norwegian construction company participated in the study. All were men and answered questionnaires on health and pain, work ability, mechanical exposure, psychosocial conditions, and demands regarding future working conditions. Most workers showed good work ability, irrespective of age. Many reported high levels of mechanical exposure at work. The level of musculoskeletal pain was higher in the middle-aged (30-50 year old) age groups and seniors aged over 50 years than among the youngest workers less than 30 years of age. All workers reported that good health was important for continued working. Most workers stated that future work must not be too physically demanding. Many workers reported relatively low job satisfaction; consequently an interesting job was rated as important for continuing work. Good social conditions were a high priority. According to the examined construction workers, good health and reduced levels of mechanical exposure at work are essential to avoid early retirement.

Effect of Attitudinal, Situational and Demographic Factors on Annoyance Due to Environmental Vibration and Noise from Construction of a Light Rapid Transit System

Directory of Open Access Journals (Sweden)

Daniel Wong-McSweeney

2016-12-01

Full Text Available The aim of this paper is to determine what non-exposure factors influence the relationship between vibration and noise exposure from the construction of a Light Rapid Transit (LRT system and the annoyance of nearby residents. Noise and vibration from construction sites are known to annoy residents, with annoyance increasing as a function of the magnitude of the vibration and noise. There is not a strong correlation between exposure and levels of annoyance suggesting that factors not directly related to the exposure may have an influence. A range of attitudinal, situational and demographic factors are investigated with the aim of understanding the wide variation in annoyance for a given vibration exposure. A face-to-face survey of residents (n = 350 near three sites of LRT construction was conducted, and responses were compared to semi-empirical estimates of the internal vibration within the buildings. It was found that annoyance responses due to vibration were strongly influenced by two attitudinal variables, concern about property damage and sensitivity to vibration. Age, ownership of the property and the visibility of the construction site were also important factors. Gender, time at home and expectation of future levels of vibration had much less influence. Due to the measurement methods used, it was not possible to separate out the effects of noise and vibration on annoyance; as such, this paper focusses on annoyance due to vibration exposure. This work concludes that for the most cost-effective reduction of the impact of construction vibration and noise on the annoyance felt by a community, policies should consider attitudinal factors.

CONTACT DERMATITIS AMONG CONSTRUCTION WORKERS

Directory of Open Access Journals (Sweden)

Ida Ayu Diah Purnama Sari

2013-02-01

Full Text Available Contact dermatitis is a form of skin inflammation with spongiosis or intercellular edema of the epidermis due to the interaction of irritants and allergens. While occupational contact dermatitis is an inflammation of the skin due to exposure to irritants or allergens in the workplace. One of the jobs that have a high risk of the disease are construction workers. Although the disease is rarely-threatening but can cause high morbidity and suffering for workers, so it can affect the economy and quality of life of patients.

Occupational skin problems in construction workers.

Science.gov (United States)

Shah, Kartik R; Tiwari, Rajnarayan R

2010-10-01

Construction workers handle cement which has constituents to produce both irritant contact dermatitis and corrosive effects (from alkaline ingredients, such as lime) and sensitization, leading to allergic contact dermatitis (from ingredients, such as chromium). The present study has been carried out among unorganized construction workers to find the prevalence of skin problems. The present cross-sectional study was conducted in 92 construction workers of Ahmedabad and Vadodara. All the workers were subjected to clinical examination after collection of information regarding demographic characteristics, occupational characteristics and clinical history on a predesigned proforma. Of them, 47.8% had morbid skin conditions. Frictional callosities in palm were observed in 18 (19.6%) subjects while 4 (4.3%) subjects had contact dermatitis. Other conditions included dry, fissured and scaly skin, infectious skin lesion, tinea cruris, lesion and ulcers on hands and/or soles. The skin conditions were common in the age group of 20-25 years, males, those having ≥1 year exposure and those working for longer hours. Half of the workers not using personal protective equipment had reported skin-related symptoms.

Practical Applications for Maintenance of Certification Products in Child and Adolescent Residency Training.

Science.gov (United States)

Williams, Laurel L; Sexson, Sandra; Dingle, Arden D; Young-Walker, Laine; John, Nadyah; Hunt, Jeffrey

2016-04-01

The authors evaluated whether Maintenance of Certification (MOC) Performance-in-Practice products in training increases trainee knowledge of MOC processes and is viewed by trainees as a useful activity. Six child and adolescent psychiatry fellowships used MOC products in continuity clinics to assess their usefulness as training tools. Two surveys assessed initial knowledge of MOC and usefulness of the activity. Forty-one fellows completed the initial survey. A majority of first-year fellows indicated lack of awareness of MOC in contrast to a majority of second-year fellows who indicated some awareness. Thirty-five fellows completed the second survey. A majority of first- and second-year fellows found the activity easy to execute and would change something about their practice as a result. Using MOC products in training appears to be a useful activity that may assist training programs in teaching the principles of self- and peer-learning.

Leaching behaviour of copper slag, construction and demolition waste and crushed rock used in a full-scale road construction.

Science.gov (United States)

Lidelöw, Sofia; Mácsik, Josef; Carabante, Ivan; Kumpiene, Jurate

2017-12-15

The leaching behaviour of a road construction with fayalitic copper slag, recycled concrete and crushed rock as sub-base materials was monitored over ten years. All studied materials used in the road construction, including crushed rock, contained concentrations of several elements exceeding the guideline values recommended by the Swedish EPA for total element concentrations for waste materials used in constructions. Despite that, leaching from the road construction under field conditions in general was relatively low. The leachates from the recycled materials contained higher concentrations of several constituents than the leachates from the reference section with crushed rock. The leaching of the elements of interest (Cr, Mo, Ni, Zn) reached peak concentrations during the second and fourth (Cu) years and decreased over the observation period to levels below the Swedish recommended values. Carbonation of the concrete aggregates caused a substantial but short-term increase in the leaching of oxyanions such as chromate. The environmental risks related to element leaching are highest at the beginning of the road life. Ageing of materials or pre-treatment through leaching is needed prior to their use in construction to avoid peak concentrations. Also, the design of road constructions should be adjusted so that recycled materials are covered with low-permeability covers, which would minimize the exposure to atmospheric precipitation and weathering. Copyright © 2017 Elsevier Ltd. All rights reserved.

Local exhaust ventilation for the control of welding fumes in the construction industry--a literature review.

Science.gov (United States)

Flynn, Michael R; Susi, Pam

2012-08-01

Arc welding is a common unit operation in the construction industry, where frequent changes in location and welding position make it more difficult to control fume exposures than in industries where fixed locations are the norm. Welders may be exposed to a variety of toxic airborne contaminants including manganese (Mn) and hexavalent chromium (CrVI). Local exhaust ventilation (LEV) is a well-known engineering control for welding fumes but has not been adopted widely in the construction industry. This literature review presents data on the performance of a variety of LEV systems for welding fume control from the construction (five references), shipyard (five references), and other industries. The studies indicate that LEV can reduce fume exposures to total particulate, Mn, and CrVI to levels below currently relevant standards. Field studies suggest that 40-50% or more reduction in exposure is possible with portable or fixed LEV systems relative to natural ventilation but that correct positioning of the hood and adequate exhaust flow rates are essential. Successful implementation of extraction guns for gas metal arc welding (GMAW) and flux core arc welding has been demonstrated, indicating that a successful balance between extraction airflow and shielding gas requirements is possible. Work practices are an important part of achieving successful control of fume exposures; in particular, positioning the hood close to the arc, checking exhaust flow rates, and avoiding the plume. Further research is needed on hood size effects for controlling welding fume with portable LEV systems and identifying and overcoming barriers to LEV use in construction.

Natural radioactivity in construction materials; Natuerliche Radioaktivitaet in Bauprodukten

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, Bernd [Bundesamt fuer Strahlenschutz, Berlin (Germany)

2017-04-01

Rocks and soils contain traces of uranium and thorium and their daughter products, also the primordial nuclide K-40. Most construction materials are produced from mineral raw materials and residuals from industrial processes, thus natural radionuclides can be detected. The radionuclide concentrations are relevant with respect to radiation protection. Radionuclides in construction materials can cause indoor radiation exposure due to their gamma radiation and due to inhalation of radon a gaseous nuclide that can diffuse out of the materials. Based on new legal developments in the European Union the Bundesamt fuer Strahlenschutz is now again concerned with radiation protection issues of building materials.

Secondhand tobacco smoke exposure and heart rate variability and inflammation among non-smoking construction workers: a repeated measures study.

Science.gov (United States)

Zhang, Jinming; Fang, Shona C; Mittleman, Murray A; Christiani, David C; Cavallari, Jennifer M

2013-10-02

Although it has been well recognized that exposure to secondhand tobacco smoke (SHS) is associated with cardiovascular mortality, the mechanisms and time course by which SHS exposure may lead to cardiovascular effects are still being explored. Non-smoking workers were recruited from a local union and monitored inside a union hall while exposed to SHS over approximately 6 hours. Participants were fitted with a continuous electrocardiographic monitor upon enrollment which was removed at the end of a 24-hr monitoring period. A repeated measures study design was used where resting ECGs and blood samples were taken from individuals before SHS exposure (baseline), immediately following SHS exposure (post) and the morning following SHS exposure (next-morning).Inflammatory markers, including high sensitivity C-reactive protein (CRP) and white blood cell count (WBC) were analyzed. Heart rate variability (HRV) was analyzed from the ECG recordings in time (SDNN, rMSSD) and frequency (LF, HF) domain parameters over 5-minute periods. SHS exposure was quantified using a personal fine particulate matter (PM2.5) monitor.Linear mixed effects regression models were used to examine within-person changes in inflammatory and HRV parameters across the 3 time periods. Exposure-response relationships with PM2.5 were examined using mixed effects models. All models were adjusted for age, BMI and circadian variation. A total of 32 male non-smokers were monitored between June 2010 and June 2012. The mean PM2.5 from SHS exposure was 132 μg/m3. Immediately following SHS exposure, a 100 μg/m3 increase in PM2.5 was associated with declines in HRV (7.8% [standard error (SE) =3%] SDNN, 8.0% (SE = 3.9%) rMSSD, 17.2% (SE = 6.3%) LF, 29.0% (SE = 10.1%) HF) and increases in WBC count 0.42 (SE = 0.14) k/μl. Eighteen hours following SHS exposure, a 100 μg/m3 increase in PM2.5 was associated with 24.2% higher CRP levels. Our study suggest that short-term SHS exposure is associated

The role of presence in virtual reality exposure therapy

OpenAIRE

Price, Matthew; Anderson, Page

2006-01-01

A growing body of literature suggests that virtual reality is a successful tool for exposure therapy in the treatment of anxiety disorders. Virtual reality (VR) researchers posit the construct of presence, defined as the interpretation of an artificial stimulus as if it were real, to be a presumed factor that enables anxiety to be felt during virtual reality exposure therapy (VRE). However, a handful of empirical studies on the relation between presence and anxiety in VRE have yielded mixed f...

Construction of the advanced boiling water reactor in Japan

International Nuclear Information System (INIS)

Natsume, Nobuo; Noda, Hiroshi

1996-01-01

The Advanced Boiling Reactor (ABWR) has been developed with international cooperation between Japan and the US as the generation of plants for the 1990s and beyond. It incorporates the best BWR technologies from the world in challengeable pursuit of improved safety and reliability, reduced construction and operating cost, reduced radiation exposure and radioactive waste. Tokyo Electric Power Company (MPCO) decided to apply the first ABWRs to unit No. 6 and 7 of Kashiwazaki-Kariwa nuclear power station (K-6 and 7). These units are scheduled to commence commercial operation in December 1996 and July 1997 respectively. Particular attention is given in this discussion to the construction period from rock inspection for the reactor building to commercial operation, which is to be achieved in only 52 months through innovative and challenging construction methods. To date, construction work is advancing ahead of the original schedule. This paper describes not only how to shorten the construction period by adoption of a variety of new technologies, such as all-weather construction method and large block module construction method, but also how to check and test the state of the art technologies during manufacturing and installation of new equipment for K-6 and 7

Construction and equipment requirements for installations and laboratories handling unsealed radioactive materials in low and medium activity - Proposal of an Israeli standard

Energy Technology Data Exchange (ETDEWEB)

Ben-Shlomo, A; Schlesinger, T; Barshad, M [Soreq Nuclear Research Center, Yavne (Israel)

1993-10-01

Working with unsealed radioactive materials involves risks of internal or external exposure to ionizing radiation. Exposure of human beings to ionizing radiation involves adverse health effects and must be prevented or at least reduced to reasonable levels. Radiation sources in this work are unsealed radioactive materials, that may be solids, liquid or in gaseous states, and in varying toxic levels. Various works and actions that are performed on the unsealed radioactive materials have varying potentials of dispersion, contamination and exposure, so that the combination of the type of work activity, isotope characteristics and physical state dictate the internal and external exposure risks. In order to limit the exposure of the personnel of installations and laboratories which deals with unsealed radioactive materials, national and international authorities and organizations standards and procedures for the requirements of construction and equipment of such installations and laboratories. This document means to be a proposal for an Israeli standard requirements for equipment and construction of installations working with low and medium activity unsealed radioactive materials. The targets for defining the, construction and equipment, requirements are: a. Safety and proper protection of personnel and public from external and internal exposure while the work is done properly. Proper protection against the risk of contaminating the environment. c. Standardization of requirements. d. Proper design of installations and laboratories. e. Supply means for evaluation and reduction of construction costs.The equipment detailed here refers to fixed (none movable) equipment which is a part of the construction of the laboratory or installation, unless specified otherwise. The document starts with a review of the recommendations of some international organizations (WHO, IAEA, NRPB) for construction and equipment requirements for these laboratories and installations. Then the

What's in It for Me? Maintenance of Certification as an Incentive for Faculty Supervision of Resident Quality Improvement Projects.

Science.gov (United States)

Rosenbluth, Glenn; Tabas, Jeffrey A; Baron, Robert B

2016-01-01

Residents are required to engage in quality improvement (QI) activities, which requires faculty engagement. Because of increasing program requirements and clinical demands, faculty may be resistant to taking on additional teaching and supervisory responsibilities without incentives. The authors sought to create an authentic benefit for University of California, San Francisco (UCSF) Pediatrics Residency Training Program faculty who supervise pediatrics residents' QI projects by offering maintenance of certification (MOC) Part 4 (Performance in Practice) credit. The authors identified MOC as an ideal framework to both more actively engage faculty who were supervising QI projects and provide incentives for doing so. To this end, in 2011, the authors designed an MOC portfolio program which included faculty development, active supervision of residents, and QI projects designed to improve patient care. The UCSF Pediatrics Residency Training Program's Portfolio Sponsor application was approved by the American Board of Pediatrics (ABP) in 2012, and faculty whose projects were included in the application were granted MOC Part 4 credit. As of December 2013, six faculty had received MOC Part 4 credit for their supervision of residents' QI projects. Based largely on the success of this program, UCSF has transitioned to the MOC portfolio program administered through the American Board of Medical Specialties, which allows the organization to offer MOC Part 4 credit from multiple specialty boards including the ABP. This may require refinements to screening, over sight, and reporting structures to ensure the MOC standards are met. Ongoing faculty development will be essential.

Basin-Wide Oceanographic Array Bridges the South Atlantic

Science.gov (United States)

Ansorge, I. J.; Baringer, M. O.; Campos, E. J. D.; Dong, S.; Fine, R. A.; Garzoli, S. L.; Goni, G.; Meinen, C. S.; Perez, R. C.; Piola, A. R.; Roberts, M. J.; Speich, S.; Sprintall, J.; Terre, T.; Van den Berg, M. A.

2014-02-01

The meridional overturning circulation (MOC) is a global system of surface, intermediate, and deep ocean currents. The MOC connects the surface layer of the ocean and the atmosphere with the huge reservoir of the deep sea and is the primary mechanism for transporting heat, freshwater, and carbon between ocean basins. Climate models show that past changes in the strength of the MOC were linked to historical climate variations. Further research suggests that the MOC will continue to modulate climate change scenarios on time scales ranging from decades to centuries [Latif et al., 2006].

The subliminal mere exposure effect does not generalize to structurally related stimuli.

Science.gov (United States)

Newell, Ben R; Bright, James E H

2003-03-01

R.F. Bornstein (1994) questioned whether subliminal mere exposure effects might generalize to structurally related stimuli, thereby providing evidence for the existence of implicit learning. Two experiments examined this claim using letter string stimuli constructed according to the rules of an artificial grammar. Experiment 1 demonstrated that brief, masked exposure to grammatical strings impaired recognition but failed to produce a mere exposure effect on novel structurally related strings seen at test. Experiment 2 replicated this result but also demonstrated that a reliable mere exposure effect could be obtained, provided the same grammatical strings were presented at test. The results suggest that the structural relationship between training and test items prevents the mere exposure effect when participants are unaware of the exposure status of stimuli, and therefore provide no evidence for the existence of implicit learning.

Maintenance of Certification for Radiation Oncology

International Nuclear Information System (INIS)

Kun, Larry E.; Ang, Kian; Erickson, Beth; Harris, Jay; Hoppe, Richard; Leibel, Steve; Davis, Larry; Hattery, Robert

2005-01-01

Maintenance of Certification (MOC) recognizes that in addition to medical knowledge, several essential elements involved in delivering quality care must be developed and maintained throughout one's career. The MOC process is designed to facilitate and document professional development of American Board of Radiology (ABR) diplomates in the essential elements of quality care in Radiation Oncology and Radiologic Physics. ABR MOC has been developed in accord with guidelines of the American Board of Medical Specialties. All Radiation Oncology certificates issued since 1995 are 10-year, time-limited certificates; diplomates with time-limited certificates who wish to maintain specialty certification must complete specific requirements of the American Board of Radiology MOC program. Diplomates with lifelong certificates are not required to participate but are strongly encouraged to do so. Maintenance of Certification is based on documentation of participation in the four components of MOC: (1) professional standing, (2) lifelong learning and self-assessment, (3) cognitive expertise, and (4) performance in practice. Through these components, MOC addresses six competencies-medical knowledge, patient care, interpersonal and communication skills, professionalism, practice-based learning and improvement, and systems-based practice. Details of requirements for components 1, 2, and 3 of MOC are outlined along with aspects of the fourth component currently under development

Strategies, methods and tools for managing nanorisks in construction

Science.gov (United States)

López de Ipiña, J. M.; Vaquero, C.; Boutry, D.; Damlencourt, J. F.; Neofytou, P.; Pilou, M.; Jankowska, E.; Larraza, I.; Pina, R.; Fernández, S.; Contreras, S.; Romero, A.; Calderon, M.; Swiezewsk, P.; Otkallo, K.; Pintea, A.; Salazar, C.; Oroz, T.; Hargreaves, B.; Ciobanu, R.; Tabrea, A.; Hazebrouck, B.; Salvi, O.; Stockmann-Juvala, H.; Vaananen, V.; Pui, D. H. Y.; Thompson, Drew

2015-05-01

This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO2, SiO2, carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of “nano-management” in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies.

Strategies, methods and tools for managing nanorisks in construction

International Nuclear Information System (INIS)

De Ipiña, J M López; Vaquero, C; Boutry, D; Damlencourt, J F; Neofytou, P; Pilou, M; Jankowska, E; Larraza, I; Pina, R; Fernández, S; Contreras, S; Romero, A; Calderon, M; Swiezewsk, P; Otkallo, K; Pintea, A; Salazar, C; Oroz, T; Hargreaves, B; Ciobanu, R

2015-01-01

This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO 2 , SiO 2 , carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of “nano-management” in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies. (paper)

Use of the Finnish Information System on Occupational Exposure (FINJEM) in epidemiologic, surveillance, and other applications.

Science.gov (United States)

Kauppinen, Timo; Uuksulainen, Sanni; Saalo, Anja; Mäkinen, Ilpo; Pukkala, Eero

2014-04-01

This paper reviews the use of the Finnish Information System on Occupational Exposure (Finnish job-exposure matrix, FINJEM) in different applications in Finland and other countries. We describe and discuss studies on FINJEM and studies utilizing FINJEM in regard to the validity of exposure estimates, occupational epidemiology, hazard surveillance and prevention, the assessment of health risks and the burden of disease, the assessment of exposure trends and future hazards, and the construction of job-exposure matrices (JEMs) in countries other than Finland. FINJEM can be used as an exposure assessment tool in occupational epidemiology, particularly in large register-based studies. It also provides information for hazard surveillance at the national level. It is able to identify occupations with high average exposures to chemical agents and can therefore serve the priority setting of prevention. However, it has only limited use at the workplace level due to the variability of exposure between workplaces. The national estimates of exposure and their temporal trends may contribute to the assessment of both the recent and future burden of work-related health outcomes. FINJEM has also proved to be useful in the construction of other national JEMs, for example in the Nordic Occupational Cancer study in the Nordic countries. FINJEM is a quantitative JEM, which can serve many purposes and its comprehensive documentation also makes it potentially useful in countries other than Finland.

Identification of potential hazards associated with new residential construction.

Science.gov (United States)

Methner, M M

2000-02-01

There were several advantages and limitations of this observational study. The most important advantage of this study was the opportunity to observe residential construction workers performing their jobs. By observing work practices, valuable information was gathered about specific trades and their potential exposure to various chemical and physical agents. This information will be useful in guiding subsequent exposure assessments. Probably the greatest limitation of this study was the lack of participation by homebuilders. Ideally, observations of construction processes would have been more objective if the study included the participation of more than one homebuilder. Aside from one worker who was observed to wear safety glasses, leather gloves, and a dust mask, virtually no personal protective equipment (PPE) was observed onsite. Often small contractors do not have the financial resources necessary to procure the appropriate PPE and issue these items to the workers. Based on hazard prevalence, professional judgement, and the degree of hazardous product use, potential exposures that warrant quantitative sampling efforts during Phase 2 of this study are: bulldozer/backhoe operators--noise, vibration, diesel exhaust; concrete workers--naphtha, mineral spirits, Portland cement; asphalt workers--petroleum hydrocarbons, asphalt, mineral spirits; plumbers--methylethyl ketone, acetone, tetrahydrofuran, cyclohexanone; drywall finishers--total and respirable dust, hexane, acetone; painters--ethylene glycol, VOCs; masons--dust (during the preparation of mortar); floor preparation technicians--total and respirable dust; and ceramic tile installers--toluene, naphtha, silica (from grout powder).

Job Exposure Matrix for Electric Shock Risks with Their Uncertainties

Science.gov (United States)

Vergara, Ximena P.; Fischer, Heidi J.; Yost, Michael; Silva, Michael; Lombardi, David A.; Kheifets, Leeka

2015-01-01

We present an update to an electric shock job exposure matrix (JEM) that assigned ordinal electric shocks exposure for 501 occupational titles based on electric shocks and electrocutions from two available data sources and expert judgment. Using formal expert elicitation and starting with data on electric injury, we arrive at a consensus-based JEM. In our new JEM, we quantify exposures by adding three new dimensions: (1) the elicited median proportion; (2) the elicited 25th percentile; and (3) and the elicited 75th percentile of those experiencing occupational electric shocks in a working lifetime. We construct the relative interquartile range (rIQR) based on uncertainty interval and the median. Finally, we describe overall results, highlight examples demonstrating the impact of cut point selection on exposure assignment, and evaluate potential impacts of such selection on epidemiologic studies of the electric work environment. In conclusion, novel methods allowed for consistent exposure estimates that move from qualitative to quantitative measures in this population-based JEM. Overlapping ranges of median exposure in various categories reflect our limited knowledge about this exposure. PMID:25856552

Job Exposure Matrix for Electric Shock Risks with Their Uncertainties

Directory of Open Access Journals (Sweden)

Ximena P. Vergara

2015-04-01

Full Text Available We present an update to an electric shock job exposure matrix (JEM that assigned ordinal electric shocks exposure for 501 occupational titles based on electric shocks and electrocutions from two available data sources and expert judgment. Using formal expert elicitation and starting with data on electric injury, we arrive at a consensus-based JEM. In our new JEM, we quantify exposures by adding three new dimensions: (1 the elicited median proportion; (2 the elicited 25th percentile; and (3 and the elicited 75th percentile of those experiencing occupational electric shocks in a working lifetime. We construct the relative interquartile range (rIQR based on uncertainty interval and the median. Finally, we describe overall results, highlight examples demonstrating the impact of cut point selection on exposure assignment, and evaluate potential impacts of such selection on epidemiologic studies of the electric work environment. In conclusion, novel methods allowed for consistent exposure estimates that move from qualitative to quantitative measures in this population-based JEM. Overlapping ranges of median exposure in various categories reflect our limited knowledge about this exposure.

Analytical method and result of radiation exposure for depressurization accident of HTTR

International Nuclear Information System (INIS)

Sawa, K.; Shiozawa, S.; Mikami, H.

1990-01-01

The Japan Atomic Energy Research Institute (JAERI) is now proceeding with the construction design of the High Temperature Engineering Test Reactor (HTTR). Since the HTTR has some characteristics different from LWRs, analytical method of radiation exposure in accidents provided for LWRs can not be applied directly. This paper describes the analytical method of radiation exposure developed by JAERI for the depressurization accident, which is the severest accident in respect to radiation exposure among the design basis accidents of the HTTR. The result is also described in this paper

An in-premise model for Legionella exposure during showering events

Science.gov (United States)

An exposure model was constructed to predict the critical Legionella densities in an engineered water system that might result in infection from inhalation of aerosols containing the pathogen while showering. The model predicted the Legionella densities in the shower air, water ...

Lung cancer risk among construction workers in California, 1988-2007.

Science.gov (United States)

Calvert, Geoffrey M; Luckhaupt, Sara; Lee, Soo-Jeong; Cress, Rosemary; Schumacher, Pam; Shen, Rui; Tak, SangWoo; Deapen, Dennis

2012-05-01

Although lung cancer risks can vary by race/ethnicity and by construction occupation, these risks have not been examined extensively. This study analyzed 110,937 lung cancer cases identified from the California Cancer Registry between 1988 and 2007. Mean age at diagnosis, proportion diagnosed at an advanced stage, and proportion with 3-year survival were calculated for lung cancer cases employed in the construction industry. Case-control methodology was also used to assess the risk of lung cancer. Morbidity odds ratios (MORs) were estimated by conditional logistic regression. Construction workers were found to have a significantly elevated risk for all lung cancer combined (MOR = 1.57) and for each lung cancer histologic subtype examined. All construction occupations, except managers/engineers and supervisors, had a significantly elevated risk for all lung cancer combined. Roofers and welders had the highest risks for total lung cancer and for each of the histologic subtypes. Construction workers in each of the four race/ethnicity groups also had significantly increased lung cancer risks. Compared to non-construction workers, construction workers were diagnosed at an earlier age, at a more advanced stage, and had significantly lower 3-year survival, though differences were modest. These findings justify additional reductions in carcinogenic exposures in construction, and increased support for smoking cessation programs at construction sites. Copyright © 2012 Wiley Periodicals, Inc.

An analysis of formation mechanism and nano-scale hardness of the laser-induced coating on Ni–17Mo–7Cr based superalloy

International Nuclear Information System (INIS)

He, Yanming; Yang, Jianguo; Fu, Wei; Wang, Limei; Gao, Zengliang

2016-01-01

The Ni–17Mo–7Cr based superalloy was laser surface treated in argon atmosphere to enhance its tribological property. The formation mechanism of the coating was revealed and its mechanical properties were characterized. The microstructure and phase identification in the coating were investigated by scanning electron microscope, transmission electron microscope and X-ray diffraction techniques. The mechanical properties of the coating, i.e. elastic modulus and hardness, were measured by nanoindentation tests. The SiC particles were used as the coating materials. During the laser treatment, the SiC will first decompose and the decomposition products Si will trigger the formation of MoC carbides in the coating. After complete solidification, the coating consists of the MoC equiaxed dendrites, interdendritic Ni matrix and graphite. Lot of tiny MoC and chromium carbides can also occur in the interdendritic matrix. The elastic modulus and hardness of MoC are characterized to be 394.0 GPa and 22.3 GPa, which are far higher than that of the matrix (E = 246.8 GPa, H = 5.3 GPa). In addition, the volume fraction of hard MoC can reach about 45.3% in the coating. The method reported in this work will provide us a new approach to fabricate the wear-resisting coating. - Highlights: • The SiC will decompose and the released Si atoms can trigger formation of hard MoC. • The coating consists of MoC equiaxed dendrites, interdendritic matrix and graphite. • The elastic modulus and hardness of MoC are measured to be 394.0 GPa and 22.3 GPa. • The volume fraction of hard MoC in the coating can reach approximately 45.3%.

An analysis of formation mechanism and nano-scale hardness of the laser-induced coating on Ni–17Mo–7Cr based superalloy

Energy Technology Data Exchange (ETDEWEB)

He, Yanming [Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou, 310014 (China); Yang, Jianguo, E-mail: yangjianguo@hit.edu.cn [Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou, 310014 (China); State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001 (China); Fu, Wei [Shanghai Baosteel Industry Technological Service Co., Ltd., Shanghai, 201900 (China); Wang, Limei; Gao, Zengliang [Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou, 310014 (China)

2016-07-15

The Ni–17Mo–7Cr based superalloy was laser surface treated in argon atmosphere to enhance its tribological property. The formation mechanism of the coating was revealed and its mechanical properties were characterized. The microstructure and phase identification in the coating were investigated by scanning electron microscope, transmission electron microscope and X-ray diffraction techniques. The mechanical properties of the coating, i.e. elastic modulus and hardness, were measured by nanoindentation tests. The SiC particles were used as the coating materials. During the laser treatment, the SiC will first decompose and the decomposition products Si will trigger the formation of MoC carbides in the coating. After complete solidification, the coating consists of the MoC equiaxed dendrites, interdendritic Ni matrix and graphite. Lot of tiny MoC and chromium carbides can also occur in the interdendritic matrix. The elastic modulus and hardness of MoC are characterized to be 394.0 GPa and 22.3 GPa, which are far higher than that of the matrix (E = 246.8 GPa, H = 5.3 GPa). In addition, the volume fraction of hard MoC can reach about 45.3% in the coating. The method reported in this work will provide us a new approach to fabricate the wear-resisting coating. - Highlights: • The SiC will decompose and the released Si atoms can trigger formation of hard MoC. • The coating consists of MoC equiaxed dendrites, interdendritic matrix and graphite. • The elastic modulus and hardness of MoC are measured to be 394.0 GPa and 22.3 GPa. • The volume fraction of hard MoC in the coating can reach approximately 45.3%.

Synthesis and characterization of mangan oxide coated sand from Capkala kaolin

Science.gov (United States)

Destiarti, Lia; Wahyuni, Nelly; Prawatya, Yopa Eka; Sasri, Risya

2017-03-01

Synthesis and characterization of mangan oxide coated sand from quartz sand fraction of Capkala kaolin has been conducted. There were two methods on synthesis of Mangan Oxide Coated Sand (MOCS) from Capkala Kaolin compared in this research. Characterization of MOCS was done by using Scanning Electron Microscope/Energy Dispersive X-Ray Spectrometer (SEM/EDX) and X-Ray Diffraction (XRD). The MOCS was tested to reduce phosphate in laundry waste. The result showed that the natural sand had bigger agregates and a relatively uniform structural orientation while both MOCS had heterogen structural orientation and manganese oxide formed in cluster. Manganese in first and second methods were 1,93% and 2,63%, respectively. The XRD spectrum showed clear reflections at 22,80°, 36,04°, 37,60° and a broad band at 26,62° (SiO2). Based on XRD spectrum, it can be concluded that mineral constituents of MOCS was verified corresponding to pyrolusite (MnO2). The former MOCS could reduce almost 60% while the later could reduce 70% phosphate in laundry waste.

Thermodynamic investigation of lime-enhanced molybdenite reduction using methane-containing gases

Energy Technology Data Exchange (ETDEWEB)

Najafabadi, Samad Ghasemi, E-mail: samad_ghasemi@yahoo.com [Materials Engineering Department, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Abbasi, Mohammad Hasan; Saidi, Ali [Materials Engineering Department, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

2010-05-20

Lime-enhanced molybdenite reduction (LEMR) with methane-containing gases has been thermodynamically studied. The reaction proceeds through the direct oxidation of MoS{sub 2} by CaO to form intermediate molybdenum oxidized species, MoO{sub 2} and CaMoO{sub 4}. The thermodynamics of Mo-O-C-H and Mo-Ca-O-C-H systems has been investigated instead of Mo-Ca-S-O-C-H system, as the sulfur is captured by calcium and forms a neutral compound (i.e. calcium sulfide). The role of reducing agent is the reduction of these oxidized species. Reduction of oxidized species by methane will yield Mo, Mo{sub 2}C or MoC. The thermodynamic investigation resulted in construction of stability diagrams of molybdenum compounds. These diagrams were constructed for CH{sub 4}-H{sub 2}, CH{sub 4}-H{sub 2}-Ar and CH{sub 4}-CO{sub 2}-H{sub 2}O gas mixtures. In addition to stability regions of Mo, Mo{sub 2}C and MoC, the carbon deposition area was also identified. The results showed that by using appropriate gas composition and temperature, different molybdenum-containing phases would be stable thermodynamically while soot formation can be avoided.

Construction and identification of differential expression genes of peripheral blood cells in radon-exposed mice

International Nuclear Information System (INIS)

Chen Rui; Shi Minhua; Hu Huacheng; Li Jianxiang; Nie Jihua; Tong Jian

2009-01-01

Objective: To screen and identify the differential expression genes on peripheral blood cells of mice based on the experimental animal model of radon exposure. Methods: BALB/c mice were exposed in a type HD-3 multifunctional radon-room, with the accumulative doses of radon-exposure group at 105 WLM and control group at 1 WLM. Total RNA was extracted from peripheral blood cells and the methods of SMART for dscDNA synthesis and SSH for gene screening was applied. With the construction of the cDNA library enriched with differentially expressed genes, the pMD 18-T plasmid containing LacZ operator at the multiple cloning site was used to allow a blue-white screening. The TA clones were amplified by nested PCR and the reverse Northern blot was used to identify up and down regulation of the clones. The differently expressed cDNA was then sequenced and analyzed. Results: The subtracted cDNA libraries were successfully constructed. A total of 390 recombinant white colonies were randomly selected. Among the 312 cDNA monoclones selected from both forward- and reverse-subtracted libraries, 41 clones were chosen to sequence for their differential expressions based on reverse Northern blot. Among the 41 sequenced clones, 10 clones with known function/annotation and 3 new ESTs with the GenBank accession numbers were obtained. Most of the known function/annotation genes were revealed to be related with cell proliferation, metabolism, cellular apoptosis and carcinogenesis. Conclusions: The animal model of radon exposure was established and the cDNA library of peripheral blood cells was successfully constructed. Radon exposure could up- and down-regulate a series of genes. Differentially expressed genes could be identified by using SSH technique and the results may help exploring mechanisms of random exposure. (authors)

Pediatric nontraumatic myositis ossificans of the neck

International Nuclear Information System (INIS)

Kokkosis, Angela A.; Balsam, Dvorah; Lee, Thomas K.; Schreiber, Z.J.

2009-01-01

Nontraumatic myositis ossificans circumscripta (MOC) is a rarely reported benign heterotopic ossification characterized by the aberrant formation of bone in extraskeletal soft tissues. Although a history of trauma can be elicited in 75% of MOC patients, the etiology is unclear in patients without inciting injury. MOC is associated with young male athletes, and is most often localized to the muscle groups of the extremities. Rare cases have been reported in children and adolescents of nontraumatic MOC in the neck. We present a 15-year-old adolescent with a rapidly growing, painful neck mass without traumatic stimulus. (orig.)

Pediatric nontraumatic myositis ossificans of the neck

Energy Technology Data Exchange (ETDEWEB)

Kokkosis, Angela A. [Stony Brook University Medical Center, Stony Brook University School of Medicine, Stony Brook, NY (United States); Balsam, Dvorah [Stony Brook University Medical Center, Department of Radiology, Stony Brook, NY (United States); Lee, Thomas K. [Stony Brook University Medical Center, Department of Pediatric Surgery, Stony Brook, NY (United States); Schreiber, Z.J. [Stony Brook University Medical Center, Department of Pathology, Stony Brook, NY (United States)

2009-04-15

Nontraumatic myositis ossificans circumscripta (MOC) is a rarely reported benign heterotopic ossification characterized by the aberrant formation of bone in extraskeletal soft tissues. Although a history of trauma can be elicited in 75% of MOC patients, the etiology is unclear in patients without inciting injury. MOC is associated with young male athletes, and is most often localized to the muscle groups of the extremities. Rare cases have been reported in children and adolescents of nontraumatic MOC in the neck. We present a 15-year-old adolescent with a rapidly growing, painful neck mass without traumatic stimulus. (orig.)

FDG PET/CT findings in a case of myositis ossificans circumscripta of the forearm.

Science.gov (United States)

Clarençon, Frédéric; Larousserie, Frédérique; Babinet, Antoine; Zylbersztein, Christophe; Talbot, Jean-Noël; Kerrou, Khaldoun

2011-01-01

Myositis ossificans circumscripta (MOC) is a rare benign neoplasm located in soft tissues that, most of the time, appears after a local trauma. The positive diagnosis of MOC may be challenging on CT or MRI findings. We report on an atypical case of a spontaneous nontraumatic MOC in a 54-year-old man, located in the longus supinatus muscle diagnosed with MRI and F-18 FDG PET/CT findings. Rarely described F-18 FDG PET/CT features in MOC are presented. Pattern of avid FDG focus on PET/CT, that may wrongly suggest osteosarcoma, is presented.

Initiating Culturally Responsive Teaching for Identity Construction in the Malaysian Classrooms

Science.gov (United States)

Idrus, Faizah

2014-01-01

This article presents evidence to the need for Culturally Responsive Teaching (CRT) to construct students' identity in the Malaysian classrooms. Since an important objective of education is to prepare individuals to exercise efficaciously in their environment, all students in multicultural society could benefit from exposure to CRT (Gay, 2000). In…

Maintenance of Certification®, Maintenance of Public Trust

Science.gov (United States)

Chung, Kevin C.; Clapham, Philip J.; Lalonde, Donald H.

2010-01-01

The Maintenance of Certification® (MOC) program has been well received by many physicians, but faced significant opposition from others, who complain that it is overly tedious, costly, and irrelevant to their practice. This article offers a consolidated and concise history of the MOC program and a summary of what plastic surgeons need to know to successfully complete the American Board of Plastic Surgery’s (ABPS) own MOC requirements. The authors have justified each step of the ABPS’s MOC process in terms of how it improves the quality of care delivered to Plastic Surgery patients. Finally, a summary of research is presented that demonstrates both that the public supports the MOC process for all physicians and that continuing education and formal assessment and improvement initiatives have been linked in multiple studies to a better and more evidence-based medical practice. PMID:21285803

Light-weight wood-magnesium oxychloride cement composite building products made by extrusion

OpenAIRE

Zhou, X; Li, Z

2012-01-01

This is the post-print version of the final paper published in Construction and Building Materials. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2011 Elsevier B.V. Magnesium oxychloride (MOC) cement is ...

Synergism of the method of characteristics and CAD technology for neutron transport calculation

International Nuclear Information System (INIS)

Chen, Z.; Wang, D.; He, T.; Wang, G.; Zheng, H.

2013-01-01

The method of characteristics (MOC) is a very popular methodology in neutron transport calculation and numerical simulation in recent decades for its unique advantages. One of the key problems determining whether the MOC can be applied in complicated and highly heterogeneous geometry is how to combine an effective geometry processing method with MOC. Most of the existing MOC codes describe the geometry by lines and arcs with extensive input data, such as circles, ellipses, regular polygons and combination of them. Thus they have difficulty in geometry modeling, background meshing and ray tracing for complicated geometry domains. In this study, a new idea making use of a CAD solid modeler MCAM which is a CAD/Image-based Automatic Modeling Program for Neutronics and Radiation Transport developed by FDS Team in China was introduced for geometry modeling and ray tracing of particle transport to remove these geometrical limitations mentioned above. The diamond-difference scheme was applied to MOC to reduce the spatial discretization error of the flat flux approximation in theory. Based on MCAM and MOC, a new MOC code was developed and integrated into SuperMC system, which is a Super Multi-function Computational system for neutronics and radiation simulation. The numerical testing results demonstrated the feasibility and effectiveness of the new idea for geometry treatment in SuperMC. (authors)

Health impacts of workplace heat exposure: an epidemiological review.

Science.gov (United States)

Xiang, Jianjun; Bi, Peng; Pisaniello, Dino; Hansen, Alana

2014-01-01

With predicted increasing frequency and intensity of extremely hot weather due to changing climate, workplace heat exposure is presenting an increasing challenge to occupational health and safety. This article aims to review the characteristics of workplace heat exposure in selected relatively high risk occupations, to summarize findings from published studies, and ultimately to provide suggestions for workplace heat exposure reduction, adaptations, and further research directions. All published epidemiological studies in the field of health impacts of workplace heat exposure for the period of January 1997 to April 2012 were reviewed. Finally, 55 original articles were identified. Manual workers who are exposed to extreme heat or work in hot environments may be at risk of heat stress, especially those in low-middle income countries in tropical regions. At risk workers include farmers, construction workers, fire-fighters, miners, soldiers, and manufacturing workers working around process-generated heat. The potential impacts of workplace heat exposure are to some extent underestimated due to the underreporting of heat illnesses. More studies are needed to quantify the extent to which high-risk manual workers are physiologically and psychologically affected by or behaviourally adapt to workplace heat exposure exacerbated by climate change.

Utopia Cracks and Polygons

Science.gov (United States)

2003-01-01

MGS MOC Release No. MOC2-339, 23 April 2003This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a pattern of polygonal cracks and aligned, elliptical pits in western Utopia Planitia. The picture covers an area about 3 km (about 1.9 mi) wide near 44.9oN, 274.7oW. Sunlight illuminates the scene from the left.

The impact of first and second language exposure on learning second language constructions

NARCIS (Netherlands)

Matusevych, Yevgen; Alishahi, Afra; Backus, Albert

2017-01-01

We study how the learning of argument structure constructions in a second language (L2) is affected by two basic input properties often discussed in literature – the amount of input and the time of L2 onset. To isolate the impact of the two factors on learning, we use a computational model that

A construction process model for implementing constructability in construction

NARCIS (Netherlands)

Langkemper, J.; Al-Jibouri, S.; Reymen, I.M.M.J.; Maas, G.J.; Gassel, van F.

2003-01-01

In construction, failure of design professionals to consider how a builder will implement the design can result in scheduling problems, cost escalation, delays and disputes during the construction process. The integration of construction knowledge and experience during planning and design is termed

NIF conventional facilities construction health and safety plan

International Nuclear Information System (INIS)

Benjamin, D W

1998-01-01

The purpose of this Plan is to outline the minimum health and safety requirements to which all participating Lawrence Livermore National Laboratory (LLNL) and non-LLNL employees (excluding National Ignition Facility [NIF] specific contractors and subcontractors covered under the construction subcontract packages (e.g., CSP-9)-see Construction Safety Program for the National Ignition Facility [CSP] Section I.B. ''NIF Construction Contractors and Subcontractors'' for specifics) shall adhere to for preventing job-related injuries and illnesses during Conventional Facilities construction activities at the NIF Project. For the purpose of this Plan, the term ''LLNL and non-LLNL employees'' includes LLNL employees, LLNL Plant Operations staff and their contractors, supplemental labor, contract labor, labor-only contractors, vendors, DOE representatives, personnel matrixed/assigned from other National Laboratories, participating guests, and others such as visitors, students, consultants etc., performing on-site work or services in support of the NIF Project. Based upon an activity level determination explained in Section 1.2.18, in this document, these organizations or individuals may be required by site management to prepare their own NIF site-specific safety plan. LLNL employees will normally not be expected to prepare a site-specific safety plan. This Plan also outlines job-specific exposures and construction site safety activities with which LLNL and non-LLNL employees shall comply

All-Sky Cataloging and Analysis of Interstellar Clouds

Science.gov (United States)

Hojaev, Alisher S.

2015-08-01

Recent quick instrumental progress provides possibilities to careful study the interstellar medium (ISM) in the Galaxy and in the nearest galaxies (M31, LMC, SMC, etc.). Significant enough baryon mass of the galactic and extragalactic ISM is concentrated in the clouds with molecular content in the densest parts. The molecular clouds (MoC) are closely related to cold dust-gas clouds, particularly HI ones and should play a key-role in the star forming processes as well as in the dynamics of the Galaxy. These arguments show the importance of counting and surveying of the MoC populations. In order to attempt to solve at least some problems of the physics and evolution of the MoC system in the Galaxy (as well as in other galaxies), its impact on the dynamics and evolution of the Galaxy itself, and to extend the results to the MoC systems in other galaxies we drafted a consolidated composite catalog of molecular and dust-gas clouds based on the recent data. Online data banks and services such as VizieR, SIMBAD at CDS as well as original publications were used. In our Galaxy there are about 200 large molecular clouds, more than 2500 smaller cold dark clouds (including clumps and cores this value exceeds approximately 5000 objects) observed in 11 kpc Solar neighborhood. The general catalog has been divided into 3 sub-catalogs: 1)large and giant MoC; 2) MoC with moderate masses and sizes; 3) small MoC including the clumps and cores. All main catalogs and subcatalogs contain the coordinates, sizes, distances, masses and other physical parameters (density, temperature, radial velocity, etc.) that are available for the different clouds. Statistical and correlation analyses of the data has been performed, the spatial distribution is drawn and the total number is estimated, the dynamic model of formation and evolution of MoC system is proposed. Our results are compared and discussed with data of other investigations as well as the ways to complete and improve the catalog data

Monitoring of occupational exposure in manufacturing of stainless steel constructions. Part I: Chromium, iron, manganese, molybdenum, nickel and vanadium in the workplace air of stainless steel welders.

Science.gov (United States)

Kucera, J; Bencko, V; Pápayová, A; Saligová, D; Tejral, J; Borská, L

2001-11-01

Exposure to workplace airborne pollutants was examined in a group of 20 workers dealing mainly with welding, polishing, drilling and assembling of stainless steel constructions. Airborne particulate matter (APM) collected using both personal and stationary samplers was analyzed by instrumental neutron activation analysis (INAA). Quality assurance procedures of both sampling and analytical stages are described. Of the elements determined, results are presented for chromium, iron, manganese, molybdenum, nickel and vanadium. The median values of element concentrations exceeded the maximum admissible limits for workplace pollutants only for chromium, while for nickel the limit was exceeded in several individual cases. Sampling of hair, nails, blood, urine and saliva to be used for biological monitoring of the exposed and control groups is also described.

The Crisis Management Practices of Australian Construction Companies

Directory of Open Access Journals (Sweden)

M Loosemore

2012-11-01

Full Text Available Recent world events in the international relations arena and the subsequent knock-on affect on the insurance industry, have sent shock-waves through Australia’s business community,elevating crisis management to the top of the managerial agenda. This paperpresents the findings of exploratory research, which investigated the crisis managementpractices of construction companies. Using a diagnostic model of crisis preparednesswhich has been developed and tested across a broad range of industries, it concludes thatif the sample surveyed is typical, then crisis planning is rudimentary and undertaken in aninsular, informal, fragmented fashion, supported by few resources and little strategicguidance. Consequently, many construction companies will have an inadequate understandingof their crisis exposure, of how to cope with crises when they happen and of howto learn and recover from their aftermath.

Arsenic levels in wipe samples collected from play structures constructed with CCA-treated wood: Impact on exposure estimates

Energy Technology Data Exchange (ETDEWEB)

Barraj, Leila M. [Chemical Regulation and Food Safety, Exponent, Inc., Suite 1100, 1150 Connecticut Ave., NW, Washington, DC 20036 (United States)], E-mail: lbarraj@exponent.com; Scrafford, Carolyn G. [Chemical Regulation and Food Safety, Exponent, Inc., Suite 1100, 1150 Connecticut Ave., NW, Washington, DC 20036 (United States); Eaton, W. Cary [RTI International, 3040 Cornwallis Road, Research Triangle Park, NC 27709 (United States); Rogers, Robert E.; Jeng, Chwen-Jyh [Toxcon Health Sciences Research Centre Inc., 9607 - 41 Avenue, Edmonton, Alberta, T6E 5X7 (Canada)

2009-04-01

Lumber treated with chromated copper arsenate (CCA) has been used in residential outdoor wood structures and playgrounds. The U.S. EPA has conducted a probabilistic assessment of children's exposure to arsenic from CCA-treated structures using the Stochastic Human Exposure and Dose Simulation model for the wood preservative scenario (SHEDS-Wood). The EPA assessment relied on data from an experimental study using adult volunteers and designed to measure arsenic in maximum hand and wipe loadings. Analyses using arsenic handloading data from a study of children playing on CCA-treated play structures in Edmonton, Canada, indicate that the maximum handloading values significantly overestimate the exposure that occurs during actual play. The objective of our paper is to assess whether the dislodgeable arsenic residues from structures in the Edmonton study are comparable to those observed in other studies and whether they support the conclusion that the values derived by EPA using modeled maximum loading values overestimate hand exposures. We compared dislodgeable arsenic residue data from structures in the playgrounds in the Edmonton study to levels observed in studies used in EPA's assessment. Our analysis showed that the dislodgeable arsenic levels in the Edmonton playground structures are similar to those in the studies used by EPA. Hence, the exposure estimates derived using the handloading data from children playing on CCA-treated structures are more representative of children's actual exposures than the overestimates derived by EPA using modeled maximum values. Handloading data from children playing on CCA-treated structures should be used to reduce the uncertainty of modeled estimates derived using the SHEDS-Wood model.

Children's Exposure to Radon in Nursery and Primary Schools.

Science.gov (United States)

Branco, Pedro T B S; Nunes, Rafael A O; Alvim-Ferraz, Maria C M; Martins, Fernando G; Sousa, Sofia I V

2016-03-30

The literature proves an evident association between indoor radon exposure and lung cancer, even at low doses. This study brings a new approach to the study of children's exposure to radon by aiming to evaluate exposure to indoor radon concentrations in nursery and primary schools from two districts in Portugal (Porto and Bragança), considering different influencing factors (occupation patterns, classroom floor level, year of the buildings' construction and soil composition of the building site), as well as the comparison with IAQ standard values for health protection. Fifteen nursery and primary schools in the Porto and Bragança districts were considered: five nursery schools for infants and twelve for pre-schoolers (seven different buildings), as well as eight primary schools. Radon measurements were performed continuously. The measured concentrations depended on the building occupation, classroom floor level and year of the buildings' construction. Although they were in general within the Portuguese legislation for IAQ, exceedances to international standards were found. These results point out the need of assessing indoor radon concentrations not only in primary schools, but also in nursery schools, never performed in Portugal before this study. It is important to extend the study to other microenvironments like homes, and in time to estimate the annual effective dose and to assess lifetime health risks.

Low Level Exposure to GB Vapor in Air: Diagnosis/Dosimetry, Lowest Observable Effect Levels, Performance-Incapacitation, and Possible Delayed Effects

National Research Council Canada - National Science Library

1998-01-01

...: (I) A glass exposure chamber for whole-body exposure of unanesthetized guinea pigs and marmosets to low levels of OB vapor in air has been designed and constructed, and is in the implementation stage...

Associations between plasma concentrations of PCB 28 and possible indoor exposure sources in Danish school children and mothers.

Science.gov (United States)

Egsmose, Emilie Lund; Bräuner, Elvira Vaclavik; Frederiksen, Marie; Mørck, Thit Aarøe; Siersma, Volkert Dirk; Hansen, Pernille Winton; Nielsen, Flemming; Grandjean, Philippe; Knudsen, Lisbeth E

2016-02-01

Polychlorinated biphenyls (PCBs) are ubiquitously present in the environment and are suspected of carcinogenic, neurotoxic and immunotoxic effects. Significantly higher plasma concentrations of the congener PCB 28 occur in children compared to adults. Exposure in schools may contribute to this difference. To determine whether increased blood plasma concentrations of PCB 28 in Danish school children and mothers are associated with living in homes or attending schools constructed in the PCB period (1959-1977). PCB 28 was analyzed in plasma samples from 116 children aged 6-11years and 143 mothers living in an urban and a rural area in Denmark and participating in the European pilot project DEMOCOPHES (Demonstration of a study to COordinate and Perform Human Biomonitoring on a European Scale). In Denmark, PCBs were used in construction in the period 1950-1977, and year of construction or renovation of the homes and schools was used as a proxy for indoor PCB exposure. Linear regression models were used to assess the association between potential PCB exposure from building materials and lipid adjusted concentrations of PCB 28 in plasma, with and without adjustment for potential confounders. Among the 116 children and 143 mothers, we were able to specify home construction period in all but 4 children and 5 mothers leaving 111 children and 138 mothers for our analyses. The median lipid adjusted plasma PCB 28 concentration was 3 (range: 1-28) ng/g lipid in the children and 2 (range: 1-8) ng/g lipid in the mothers. Children living in homes built in the PCB period had significantly higher lipid adjusted plasma PCB 28 concentrations compared to children living in homes built before or after the PCB period. Following adjustment for covariates, PCB 28 concentrations in children were 40 (95% CI: 13; 68) percent higher than concentrations of children living in homes constructed at other times. Furthermore, children attending schools built or substantially refurbished in the PCB

Cardiovascular health effects following exposure of human volunteers during fire extinction exercises

DEFF Research Database (Denmark)

Andersen, Maria Helena Guerra; Saber, Anne Thoustrup; Pedersen, Peter Bøgh

2017-01-01

firefighting exercises in a constructed firehouse and flashover container. The subjects were instructed to extinguish fires of either wood or wood with electrical cords and mattresses. The exposure to particulate matter ( PM) was assessed at various locations and personal exposure was assessed by portable PM...... of cardiovascular effects in young conscripts training to become firefighters. Methods: Healthy conscripts (n = 43) who participated in a rescue educational course for firefighting were enrolled in the study. The exposure period consisted of a three-day training course where the conscripts participated in various...... samplers and urinary excretion of 1-hydroxypyrene. Cardiovascular measurements included microvascular function and heart rate variability (HRV). Results: The subjects were primarily exposed to PM in bystander positions, whereas self-contained breathing apparatus effectively abolished pulmonary exposure...

Hexavalent chromium exposures and exposure-control technologies in American enterprise: results of a NIOSH field research study.

Science.gov (United States)

Blade, L M; Yencken, M Story; Wallace, M E; Catalano, J D; Khan, A; Topmiller, J L; Shulman, S A; Martinez, A; Crouch, K G; Bennett, J S

2007-08-01

The National Institute for Occupational Safety and Health (NIOSH) conducted 21 field surveys in selected industries to characterize workers' exposures to hexavalent chromium-containing airborne particulate and to evaluate existing technologies for controlling these exposures. Hexavalent chromium Cr(VI) is a respiratory irritant and chronic inhalation may cause lung cancer. Primary evaluation methods included collection of full work shift, personal breathing-zone (PBZ) air samples for Cr(VI), measurement of ventilation system parameters, and documentation of processes and work practices. This study emphasized evaluation of engineering exposure control measures, so PBZ exposures were measured on the outside of personal protective equipment, for example, respirators. Field surveys were conducted in two chromium electroplating facilities, including one where full-shift PBZ exposures to Cr(VI) ranged from 3.0 to 16 times the 1 micro g/m(3)NIOSH recommended exposure limit (REL) despite several engineering controls on the plating tanks. At a painting and coating facility that used Cr(VI)-containing products, full-shift exposures of painters and helpers (2.4 to 55 micro g/m(3)) exceeded the REL, but LEV effectiveness was limited. Other operations evaluated included welding in construction; metal cutting operations on chromium-containing materials in ship breaking; chromate-paint removal with abrasive blasting; atomized alloy-spray coating; foundry operations; printing; and the manufacture of refractory brick, colored glass, prefabricated concrete products, and treated wood products. NIOSH researchers concluded that, in many of the evaluated processes, Cr(VI) exposures at or below the current NIOSH REL are achievable. However, for some processes, it is unclear whether controlling exposures to this range is consistently achievable without respirator use. Some operations involving the application of coatings and finishes may be among those most difficult to control to this

Cracks in Utopia

Science.gov (United States)

1999-01-01

Many of the craters found on the northern plains of Mars have been partly filled or buried by some material (possibly sediment). The Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image presented here (MOC2-136b, above left) shows a high-resolution view of a tiny portion of the floor of one of these northern plains craters. The crater, located in Utopia Planitia at 44oN, 258oW, is shown on the right (MOC2-136a)with a small white box to indicate the location of the MOC image. The MOC image reveals that the material covering the floor of this crater is cracked and pitted. The origin and source of material that has been deposited in this crater is unknown.The MOC image was acquired in June 1999 and covers an area only 1.1 kilometers (0.7 miles) wide at a resolution of 1.8 meters (6 feet) per pixel. The context picture is a mosaic of Viking 2 orbiter images 010B53 and 010B55, taken in 1976. Both images are illuminated from the left. Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

Airborne exposure to laboratory animal allergens

Directory of Open Access Journals (Sweden)

Howard J Mason

2017-09-01

Full Text Available Exposure to laboratory animal allergens remains a significant cause of IgE-mediated occupational allergy and asthma. Since 2005, we have measured the major mouse and rat allergens (mus m 1 and rat n 1 collected on filters from air sampling in a range of UK and non-UK animal facilities. Supplied core data allowed us to construct an anonymized database of atmospheric results in ng m–3 containing 3080 mouse and 1392 rat analyses. Roughly twice as many static samples compared to personal samples had been sent for analysis. The medians (90th percentiles for the mouse and rat allergens employing personal atmospheric sampling were 2.6 (60.6 and 0.4 (12.4 ng m–3 respectively; for static samples the equivalent values were 0.2 (3.7 and 0.1 (1.4 ng m–3. Where unequivocal sample descriptors were provided with samples, results were categorised to activities/areas. Medians and 90th percentiles in these categories suggest that staff undertaking cleaning out, dumping of soiled bedding and cleaning cages can still have very substantial potential exposures in some facilities. The move to filtered cages appears to reduce general exposure, but filter changing and/or cleaning can lead to high exposures. In some facilities, animal receipt can cause significant exposures, as well as activities such as bleeding, culling and dosing; all activities involving the handling of animals outside of cages. We believe that the data presented may help those using air measurements in such facilities to improve their control of exposure to such aeroallergens, and thus reduce the risk of both sensitisation and subsequent allergic health problems, including the development of allergic asthma.

The American Board of Internal Medicine Maintenance of Certification Examination and State Medical Board Disciplinary Actions: a Population Cohort Study.

Science.gov (United States)

McDonald, Furman S; Duhigg, Lauren M; Arnold, Gerald K; Hafer, Ruth M; Lipner, Rebecca S

2018-03-07

Some have questioned whether successful performance in the American Board of Internal Medicine (ABIM) Maintenance of Certification (MOC) program is meaningful. The association of the ABIM Internal Medicine (IM) MOC examination with state medical board disciplinary actions is unknown. To assess risk of disciplinary actions among general internists who did and did not pass the MOC examination within 10 years of initial certification. Historical population cohort study. The population of internists certified in internal medicine, but not a subspecialty, from 1990 through 2003 (n = 47,971). ABIM IM MOC examination. General internal medicine in the USA. The primary outcome measure was time to disciplinary action assessed in association with whether the physician passed the ABIM IM MOC examination within 10 years of initial certification, adjusted for training, certification, demographic, and regulatory variables including state medical board Continuing Medical Education (CME) requirements. The risk for discipline among physicians who did not pass the IM MOC examination within the 10 year requirement window was more than double than that of those who did pass the examination (adjusted HR 2.09; 95% CI, 1.83 to 2.39). Disciplinary actions did not vary by state CME requirements (adjusted HR 1.02; 95% CI, 0.94 to 1.16), but declined with increasing MOC examination scores (Kendall's tau-b coefficient = - 0.98 for trend, p actions were less severe among those passing the IM MOC examination within the 10-year requirement window than among those who did not pass the examination. Passing a periodic assessment of medical knowledge is associated with decreased state medical board disciplinary actions, an important quality outcome of relevance to patients and the profession.

Media exposure and sponsor recall: Cricket World Cup 2003 | Van ...

African Journals Online (AJOL)

This paper reports on a study into the relationship between media exposure and sponsor recall relating to an international event, namely the Cricket World Cup 2003 (CWC 2003). The application of sponsorship as a communication construct and recall as a media vehicle effect is investigated. Recall has been widely ...

Feasibility of constructed wetlands for removing chlorothalonil and chlorpyrifos from aqueous mixtures

International Nuclear Information System (INIS)

Sherrard, R.M.; Bearr, J.S.; Murray-Gulde, C.L.; Rodgers, J.H.; Shah, Y.T.

2004-01-01

Chlorpyrifos (an insecticide) and chlorothalonil (a fungicide) are transported in stormwater runoff and can be lethal to receiving aquatic system biota. This study determined removal rates of chlorpyrifos and chlorothalonil in simulated stormwater runoff treated in constructed wetland mesocosms. Using sentinel species, Ceriodaphnia dubia and Pimephales promelas, observed declines in toxicity of the simulated runoff after treatment were 98 and 100%, respectively. First order removal rates were 0.039/h for chlorpyrifos and 0.295/h for chlorothalonil in these experiments. Constructed wetland mesocosms were effective for decreasing concentrations of chlorpyrifos and chlorothalonil in simulated stormwater runoff, and decreasing P. promelas and C. dubia mortality resulting from these exposures. The results from this study indicate that constructed wetlands could be part of an efficient mitigation strategy for stormwater runoff containing these pesticides. - Constructed wetlands have potential for treatment of pesticide mixtures in stormwater runoff

Feasibility of constructed wetlands for removing chlorothalonil and chlorpyrifos from aqueous mixtures

Energy Technology Data Exchange (ETDEWEB)

Sherrard, R.M.; Bearr, J.S.; Murray-Gulde, C.L.; Rodgers, J.H.; Shah, Y.T

2004-02-01

Chlorpyrifos (an insecticide) and chlorothalonil (a fungicide) are transported in stormwater runoff and can be lethal to receiving aquatic system biota. This study determined removal rates of chlorpyrifos and chlorothalonil in simulated stormwater runoff treated in constructed wetland mesocosms. Using sentinel species, Ceriodaphnia dubia and Pimephales promelas, observed declines in toxicity of the simulated runoff after treatment were 98 and 100%, respectively. First order removal rates were 0.039/h for chlorpyrifos and 0.295/h for chlorothalonil in these experiments. Constructed wetland mesocosms were effective for decreasing concentrations of chlorpyrifos and chlorothalonil in simulated stormwater runoff, and decreasing P. promelas and C. dubia mortality resulting from these exposures. The results from this study indicate that constructed wetlands could be part of an efficient mitigation strategy for stormwater runoff containing these pesticides. - Constructed wetlands have potential for treatment of pesticide mixtures in stormwater runoff.

Digital Exhibitionism The Age of Exposure

Directory of Open Access Journals (Sweden)

Ana María Munar

2010-09-01

Full Text Available Web 2.0 has expanded the possibilities of digital creative production by individu-als and enabled the digitalisation of private life experiences. This study analyses how social media contributes to the making of personal biographies and discusses the shift towards a culture of digital exposure. This study uses netnography and a constructive approach to examine online communities and social networks. The findings illustrate that these new technological platforms are mediating in the con-struction of late modern biographies, which are expanding the complexity of to-day’s socio-technical systems. The paper discusses the power of these technolo-gies as agents of socio-cultural change and suggests that, besides providing indi-vidual realisation and mediated pleasure, these technologies encourage exhibitio-nistic and voyeuristic behaviour, elude reflexivity, and display authoritative ten-dencies and new possibilities for social control.

Information by the German Federal Government. Environmental radioactivity and radiation exposure in 2010

International Nuclear Information System (INIS)

2010-01-01

The information by the German Federal Government on the environmental radioactivity and radiation exposure in 2010 includes five chapters. (I) Natural radiation exposure: radiation sources, contributions from cosmic radiation, contaminated construction materials, food and drinking water, and radon, evaluation of the different components of natural radiation exposure. (II) Civilization caused radiation exposure: nuclear power plants, research centers, nuclear fuel processing plants, other nuclear facilities (interim storage facilities, repositories); summarizing evaluation for nuclear facilities; environmental radioactivity due to mining; radioactive materials in research, technology and households; industrial and mining residues; fall-out as a consequence of the Chernobyl reactor accident and nuclear weapon testing. (III) Occupational radiation exposure: civil radiation sources, natural radiation sources, special events. (IV) Medical radiation exposure; X-ray diagnostics; nuclear medicine; radiotherapy using ionizing radiation; radiotherapy using open radioactive materials; evaluation of radiotherapy. (V) Non-ionizing radiation: electromagnetic fields; optical radiation; certification of solaria.

Controlling exposure to radon, France, December 2006

International Nuclear Information System (INIS)

Godet, J.L.; Perrin, M.L.; Dechaux, E.; Pineau, C.

2007-01-01

Controlling exposure to radon, France, December 2006 Exposure to radon, along with medical exposure, is the leading source of the French population exposure to ionizing radiation. Radon is a confirmed cause of lung cancer in man (classified in group I by the international Agency for research on Cancer (I.A.R.C.)). According to available estimates, the numbers of lung cancers attributable to radon exposure in France are far fewer than those caused by tobacco. However, according to a recent European study, around 9% of lung cancers in Europe may be caused by radon. Thus, due to the number of people exposed, radon has become a public health issue which calls for action, considering that exposure can be significantly reduced by implementing measures which are often simple. Since 2002, the Nuclear Safety Authority (Asn) has proceeded in implementing a new regulatory framework for the risk management related to the presence of radon in public places. The new system is now fully operational. In addition, based on the initiatives adopted by the government in June 2004 in the context of the National Health and Environment Plan (P.N.S.E.), the Asn drew up a plan in 2005, in collaboration with the Ministry for Urban Planning and Construction, to coordinate the actions of various national bodies involved in this field. This three-pronged strategy is as follows: - Creation of a new risk management policy related to the presence of radon in existing homes and in new buildings; - Supporting and controlling the implementation of regulations for managing radon related risks in public places; - Improvement and dissemination of knowledge on radon exposure and its related risks. (author)

Does engagement with exposure yield better outcomes? Components of presence as a predictor of treatment response for virtual reality exposure therapy for social phobia.

Science.gov (United States)

Price, Matthew; Mehta, Natasha; Tone, Erin B; Anderson, Page L

2011-08-01

Virtual reality exposure (VRE) has been shown to be effective for treating a variety of anxiety disorders, including social phobia. Presence, or the level of connection an individual feels with the virtual environment, is widely discussed as a critical construct both for the experience of anxiety within a virtual environment and for a successful response to VRE. Two published studies show that whereas generalized presence relates to fear ratings during VRE, it does not relate to treatment response. However, presence has been conceptualized as multidimensional, with three primary factors (spatial presence, involvement, and realness). These factors can be linked to other research on the facilitation of fear during exposure, inhibitors of treatment response (e.g., distraction), and more recent theoretical discussions of the mechanisms of exposure therapy, such as Bouton's description of expectancy violation. As such, one or more of these components of presence may be more strongly associated with the experience of fear during VRE and treatment response than the overarching construct. The current study (N=41) evaluated relations between three theorized components of presence, fear ratings during VRE, and treatment response for VRE for social phobia. Results suggest that total presence and realness subscale scores were related to in-session peak fear ratings. However, only scores on the involvement subscale significantly predicted treatment response. Implications of these findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

CONSTRUCTION CONTRACTS ACT (2013): IMPLICATIONS OF THE ACT FOR THE PRACTICING QUANTITY SURVEYOR. A COMPANY BASED INVESTIGATION

OpenAIRE

Byrne, Roy

2017-01-01

Abstract The Construction Contracts Act 2013 was introduced into the Irish construction industry for the primary benefit of the sub-contractors, and to address their exposure to the poor payment practices that were prevalent in the industry. The Act was introduced in the Seanad by Senator Feargal Quinn in May 2010, as a private member’s bill. It was enacted on 29th July 2013 and recently came into effect on the 25th July 2016. The Act seeks to regulate payments under construction contra...

Cardiovascular health effects following exposure of human volunteers during fire extinction exercises

DEFF Research Database (Denmark)

Andersen, Maria Helena Guerra; Saber, Anne Thoustrup; Pedersen, Peter Bøgh

2017-01-01

Background: Firefighters have increased risk of cardiovascular disease and of sudden death from coronary heart disease on duty while suppressing fires. This study investigated the effect of firefighting activities, using appropriate personal protective equipment (PPE), on biomarkers...... firefighting exercises in a constructed firehouse and flashover container. The subjects were instructed to extinguish fires of either wood or wood with electrical cords and mattresses. The exposure to particulate matter ( PM) was assessed at various locations and personal exposure was assessed by portable PM...

Adverse effect of diesel engine produced particulate matter on various stone types and concrete: a laboratory exposure experiment

Science.gov (United States)

Farkas, Orsolya; Szabados, György; Antal, Ákos; Török, Ákos

2015-04-01

The effect of particulate matter on construction materials have been studied under laboratory conditions. For testing the adverse effects of diesel soot and particulate matter on stone and concrete a small scale laboratory exposure chamber was constructed. Blocks of 9 different stone types and concrete was placed in the chamber and an exhaust pipe of diesel engine was diverted into the system. Tested stones included: porous limestone, cemented non-porous limestone, travertine, marble, rhyolite tuff, andesite and granite. The engine was operated for 10 hours and the produced particulate matter was diverted directly to the surface of the material specimens of 3 cm in diameter each. Working parameters of the engine were controlled; the composition of the exhaust gas, smoke value and temperature were continuously measured during the test. Test specimens were documented and analysed prior to exposure and after the exposure test. Parameters such colorimetric values, weight, surface properties, mineralogical compositions of the test specimens were recorded. The working temperature was in the order of 300°C-320°C. The gas concentration was in ppm as follows: 157 CO; 5.98 CO2, 34.3 THC; 463 NOx; 408 NO; 12.88 O2. Our tests have demonstrated that significant amount of particulate matter was deposited on construction materials even at a short period of time; however the exposure was very intense. It also indicates that that the interaction of particulate matter and aerosol compounds with construction materials in urban areas causes rapid decay and has an adverse effect not only on human health but also on built structures.

Hydrocarbon solvent exposure data: compilation and analysis of the literature.

Science.gov (United States)

Caldwell, D J; Armstrong, T W; Barone, N J; Suder, J A; Evans, M J

2000-01-01

An occupational exposure database for hydrocarbon solvent end-use applications was constructed from the published literature. The database provides exposure assessment information for such purposes as regulatory risk assessments, support of industry product stewardship initiatives, and identification of applications in which limited exposure data are available. It is quantitative, documented, and based on credible data. Approximately 350 articles containing quantitative hydrocarbon solvent exposure data were identified using a search of computer databases of published literature. Many articles did not report sufficient details of the exposure data for inclusion in the database (e.g., full-shift exposure or task-based exposure data). Others were excluded because only limited summary statistics were provided, which precluded statistical analysis of the data (e.g., arithmetic mean concentration presented, but no sample number). Following evaluation, 16,880 hydrocarbon solvent exposure measurements from 99 articles were entered into a database for analysis. Methods used to identify and evaluate published solvent exposure data are described along with more detailed analysis of worker exposure to hydrocarbon solvents in three major end-use applications: painting and coating, printing, and adhesives. Solvent exposures were evaluated against current ACGIH threshold limit values (TLVs) and trends were identified. Limited quantitative data are available prior to 1970. In general, reported hydrocarbon solvent exposures decreased fourfold from 1960 to 1998, were below the TLVs applicable to specific hydrocarbon solvents at the time, and on average have been below 40% of the TLV since 1980. The database already has proved valuable; however, the utility of published exposure data could be further improved if authors consistently reported essential data elements and supporting information.

[Muskuloskeletal disorders in construction industry: hospital cases].

Science.gov (United States)

Santini, M; Riva, M M; Mosconi, G

2012-01-01

The authors analyse 493 hospital cases in 356 workers from the construction industry, came to observation for musculoskeletal disorders (average age 48, 2 years, SD 9; work seniority 32, 2 years, SD 9, 7; work seniority in construction industry 27, 3 years, SD 12, 4). The evaluation was required in 305 subjects (85.7% of the sample) to investigate one or more suspected WMDS; in 51 subjects (14.3% of the sample) to express an opinion on fitness to work or residual work capacity. Investigations led to diagnosis of 479 musculoskeletal disorders; the districts most affected are spine and upper limb. 64.7% of the musculoskeletal disorders was evaluated to be work-related, the percentage rises to 68% when considering only cases sent for evaluation of suspected WMDS. The most frequent reasons to exclude relation between the musculoskeletal disorders and work were an high age at diagnosis, presence of comorbidity or outcome of trauma, a disease mismatch exposure.

Frequency specificity and left-ear advantage of medial olivocochlear efferent modulation: a study based on stimulus frequency otoacoustic emission.

Science.gov (United States)

Xing, Dongjia; Gong, Qin

2017-09-06

The medial olivocochlear (MOC) bundle is an auditory nucleus that projects efferent nerve fibers to the outer hair cells (OHCs) for synaptic innervation. The aim of the present study was to investigate the possible existence of frequency and ear specificity in MOC efferent modulation, as well as how MOC activation influences cochlear tuning. Stimulus frequency otoacoustic emissions (SFOAEs) were used to study MOC efferent modulation. Therefore, the current experiment was designed to compare the degree of SFOAE suppression in the both ears of 20 individuals at 1, 2, 4, and 8 kHz. We also compared changes in Q10 values of SFOAE suppression tuning curves at 1, 2, and 4 kHz under contralateral acoustic stimulation (CAS) and no-CAS conditions. We observed a significant reduction in SFOAE magnitude in the CAS condition compared with the no-CAS condition at 1 and 2 kHz in the left ear. A significant difference in CAS suppression was also found between the left and right ears at 1 and 2 kHz, with larger CAS suppression in the left ear. CAS further produced a statistically significant increase in the Q10 value at 1 kHz and a significant reduction in Q10 values at 2 and 4 kHz. These findings suggest a left-ear advantage in terms of CAS-induced MOC efferent SFOAE suppression, with larger MOC efferent modulation for lower frequencies, and cochlear tuning was sharpened by means of MOC activation at lower frequencies and broadened at higher frequencies.

In vitro catheter and sorbent-based method for clearance of radiocontrast material during cerebral interventions

International Nuclear Information System (INIS)

Angheloiu, George O.; Hänscheid, Heribert; Reiners, Christoph; Anderson, William D.; Kellum, John A.

2013-01-01

Background: Contrast-induced acute kidney injury is a severe condition resulting from the use of radiology contrast in patients with predisposing factors. Hypothesis: We hypothesized that a novel system including a device containing polymer resin sorbent beads and a custom-made suctioning catheter could efficiently remove contrast from an in vitro novel model of circulatory system (MOCS) mimicking the cerebral circulation. Methods: A custom-made catheter was built and optimized for cerebral venous approach. The efficiency of a system made of a polymer resin sorbent beads column (CST 401, Cytosorbents) and this particular catheter was tested in the MOCS running a solution composed of 0.9% saline and radio-contrast. During two series of 18 cycles of first-pass experiments we assessed the catheter's suctioning efficiency and the system's ability to clear radio-contrast injected into the MOCS's cerebral arterial segment. We also assessed the functioning and reliability of the MOCS. Results: Mean suctioning efficiency of the catheter was 84% ± 24%. The polymer sorbent column contrast removal rate was initially 96% and gradually decreased with subsequent cycles in a linear fashion during an experiment lasting approximately 90 minutes. The MOCS had a reliability of 0.9946×min −1 where 1 × min −1 was the optimum value. Conclusion: A system including a polymer resin sorbent beads column and a custom-made suctioning catheter had an excellent initial efficiency in quickly removing contrast from an artificial MOCS mimicking the cerebral circulation. MOCS is an inexpensive and relatively reliable custom-made system that can be used for training or testing purposes

Modified Mixed Lagrangian-Eulerian Method Based on Numerical Framework of MT3DMS on Cauchy Boundary.

Science.gov (United States)

Suk, Heejun

2016-07-01

MT3DMS, a modular three-dimensional multispecies transport model, has long been a popular model in the groundwater field for simulating solute transport in the saturated zone. However, the method of characteristics (MOC), modified MOC (MMOC), and hybrid MOC (HMOC) included in MT3DMS did not treat Cauchy boundary conditions in a straightforward or rigorous manner, from a mathematical point of view. The MOC, MMOC, and HMOC regard the Cauchy boundary as a source condition. For the source, MOC, MMOC, and HMOC calculate the Lagrangian concentration by setting it equal to the cell concentration at an old time level. However, the above calculation is an approximate method because it does not involve backward tracking in MMOC and HMOC or allow performing forward tracking at the source cell in MOC. To circumvent this problem, a new scheme is proposed that avoids direct calculation of the Lagrangian concentration on the Cauchy boundary. The proposed method combines the numerical formulations of two different schemes, the finite element method (FEM) and the Eulerian-Lagrangian method (ELM), into one global matrix equation. This study demonstrates the limitation of all MT3DMS schemes, including MOC, MMOC, HMOC, and a third-order total-variation-diminishing (TVD) scheme under Cauchy boundary conditions. By contrast, the proposed method always shows good agreement with the exact solution, regardless of the flow conditions. Finally, the successful application of the proposed method sheds light on the possible flexibility and capability of the MT3DMS to deal with the mass transport problems of all flow regimes. © 2016, National Ground Water Association.

Control of occupational exposure to cosmic radiation outside the atmosphere

International Nuclear Information System (INIS)

Katoh, Kazuaki; Kaneko, Masahito

2000-01-01

Japan is participating in the project of constructing ISS, International Space Station, and taking part of constructing JEM, Japan Experimental Module. It is expected that people working in this module upon completion should be controlled their exposure to cosmic radiation according to Japanese laws. Hence, the issue has been studied by a committee in NASDA, National Space Development Agency of Japan. In 1999, its interim report was released and public comments had been invited. In this presentation, following the introduction of the gist of the interim report as well as comments by the authors, countermeasures are proposed. (author)

Models for retrospective quantification of indoor radon exposure in case-control studies

International Nuclear Information System (INIS)

Gerken, M.; Kreienbrock, L.; Wellmann, J.; Kreuzer, M.; Wichmann, H.E.

2000-01-01

In epidemiologic studies on lung cancer risk due to indoor radon the quantification of individual radon exposure over a long time period is one of the main issues. Therefore, radon measurements in one or more dwellings, which in total have been inhabited by the participants for a sufficient time-period, are necessary as well as consideration of changes of building characteristics and ventilation habits, which influence radon concentration. Given data on 1-y alpha-track measurements and personal information from 6,000 participants of case-control studies in West and East Germany, and improved method is developed to assess individual radon exposure histories. Times spent in different rooms of the dwelling, which are known from a personal questionnaire, are taken into account. The time spent outside the house varies substantially among the participants. Therefore, assuming a substantially lower radon exposure outside the dwelling, the residence time constitutes an important aspect of total radon exposure. By means of an analysis of variance, important determinants of indoor radon are identified, namely constant conditions such as type of house, type of construction, year of construction, floor and type of basement, and changeable conditions such as heating system, window insulation, and airing habits. A correction of measurements in former dwellings by factors derived from the analysis is applied if current living conditions differ from those of the participants at the time when they were living in the particular dwellings. In rare cases the adjustment for changes leads to a correction of the measurements with a factor of about 1.4, but a reduction of 5% on average only. Exposure assessment can be improved by considering time at home and changes of building and ventilation conditions that affect radon concentration. The major concern that changes in ventilation habits and building conditions lead to substantial errors in exposure assessment cannot be confirmed in the

Whole core transport calculation for the VHTR hexagonal core

International Nuclear Information System (INIS)

Cho, J. Y.; Kim, K. S.; Lee, C. C.; Joo, H. G.

2007-01-01

Recently, the DeCART code which performs the whole core calculation by coupling the radial MOC transport kernel with the axial nodal kernel has equipped a kernel to deal with the hexagonal geometry and applied to the VHTR hexagonal core to examine the accuracy and the computational efficiency of the implemented kernel. The implementation includes a modular ray tracing module based on the hexagonal assembly and a multi-group CMFD module to perform an efficient transport calculation. The requirements for the modular ray are: (1) the assembly based path linking and (2) the complete reflection capabilities. The first requirement is met by adjusting the azimuthal angle and the ray spacing for the modular ray to construct a core ray by the path linking. The second requirement is met by expanding the constructed azimuthal angle in the range of [0,30 degree] to the remained range to reflect completely at the core boundaries. The considered reflecting surface angles for the complete reflection are 30n's (n=1,2,1,12). The CMFD module performs the equivalent diffusion calculation to the radial MOC transport calculation based on the homogenized structure units. The structure units include the hexagonal pin cells and gap cells appearing at the assembly boundary. Therefore, the CMFD module is programmed to deal with the unstructured cells such as the gap cells. The CMFD equation consists of the two parts of (1) the conventional FDM and (2) the current corrective parts. Since the second part of the CMFD equation guarantees the reproducibility of the radial MOC transport solutions for the cell averaged reaction rate and the net current at the cell surfaces, how to build the first part of the CMFD equation is not important. Therefore, the first part of the CMFD equation is roughly built by using the normal distance from the gravity center to the surface. The VHTR core uses helium as a coolant which is realized as a void hole in a neutronics calculation. This void hole which

Impact of Glycolate Anion on Aqueous Corrosion in DWPF and Downstream Facilities

Energy Technology Data Exchange (ETDEWEB)

Mickalonis, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-07-12

Glycolic acid is being evaluated as an alternate reductant in the preparation of high level waste for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS). During processing, the glycolic acid may not be completely consumed with small quantities of the glycolate anion being carried forward to other high level waste (HLW) facilities. The SRS liquid waste contractor requested an assessment of the impact of the glycolate anion on the corrosion of the materials of construction (MoC) throughout the waste processing system since this impact had not been previously evaluated. A literature review revealed that corrosion data were not available for the MoCs in glycolic-bearing solutions applicable to SRS systems. Data on the material compatibility with only glycolic acid or its derivative products were identified; however, data were limited for solutions containing glycolic acid or the glycolate anion. For the proprietary coating systems applied to the DWPF concrete, glycolic acid was deemed compatible since the coatings were resistant to more aggressive chemistries than glycolic acid. Additionally similar coating resins showed acceptable resistance to glycolic acid.

Impact of Glycolate Anion on Aqueous Corrosion in DWPF and Downstream Facilities

Energy Technology Data Exchange (ETDEWEB)

Mickalonis, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-11-20

Glycolic acid is being evaluated as an alternate reductant in the preparation of high level waste for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS). During processing, the glycolic acid may not be completely consumed with small quantities of the glycolate anion being carried forward to other high level waste (HLW) facilities. The SRS liquid waste contractor requested an assessment of the impact of the glycolate anion on the corrosion of the materials of construction (MoC) throughout the waste processing system since this impact had not been previously evaluated. A literature review revealed that corrosion data were not available for the MoCs in glycolic-bearing solutions applicable to SRS systems. Data on the material compatibility with only glycolic acid or its derivative products were identified; however, data were limited for solutions containing glycolic acid or the glycolate anion. For the proprietary coating systems applied to the DWPF concrete, glycolic acid was deemed compatible since the coatings were resistant to more aggressive chemistries than glycolic acid. Additionally, similar coating resins showed acceptable resistance to glycolic acid.

Experimental investigation of coating degradation during simultaneous acid and erosive particle exposure

DEFF Research Database (Denmark)

Møller, Victor Buhl; Dam-Johansen, Kim; Frankær, Sarah Maria

When used in industrial processes, such as stirred acid leaching in the mineral industry, thermoset coatings are exposed to a combination of aggressive chemicals and erosive particlewear. While each exposure condition has been studied separately, no research has been presented on the effects...... of a simultaneous exposure. To investigate this, a pilot-scale stirred acid leaching tank, containing erosive particles and acidic solutions, has been designed and constructed. Resin types considered are amine-cured novolac epoxy and vinyl ester. Transient coating degradation is mapped through visual inspection...

Modeling vehicle interior noise exposure dose on freeways: Considering weaving segment designs and engine operation.

Science.gov (United States)

Li, Qing; Qiao, Fengxiang; Yu, Lei; Shi, Junqing

2017-07-05

Vehicle interior noise functions at the dominant frequencies of 500 Hz below and around 800 Hz, which fall into the bands that may impair hearing. Recent studies demonstrated that freeway commuters are chronically exposed to vehicle interior noise, bearing the risk of hearing impairment. The interior noise evaluation process is mostly conducted in a laboratory environment. The test results and the developed noise models may underestimate or ignore the noise effects from dynamic traffic and road conditions and configuration. However, the interior noise is highly associated with vehicle maneuvering. The vehicle maneuvering on a freeway weaving segment is more complex because of its nature of conflicting areas. This research is intended to explore the risk of the interior noise exposure on freeway weaving segments for freeway commuters and to improve the interior noise estimation by constructing a decision tree learning-based noise exposure dose (NED) model, considering weaving segment designs and engine operation. On-road driving tests were conducted on 12 subjects on State Highway 288 in Houston, Texas. On-board Diagnosis (OBD) II, a smartphone-based roughness app, and a digital sound meter were used to collect vehicle maneuvering and engine information, International Roughness Index, and interior noise levels, respectively. Eleven variables were obtainable from the driving tests, including the length and type of a weaving segment, serving as predictors. The importance of the predictors was estimated by their out-of-bag-permuted predictor delta errors. The hazardous exposure level of the interior noise on weaving segments was quantified to hazard quotient, NED, and daily noise exposure level, respectively. Results showed that the risk of hearing impairment on freeway is acceptable; the interior noise level is the most sensitive to the pavement roughness and is subject to freeway configuration and traffic conditions. The constructed NED model shows high predictive

Construction of a risk assessment system for chemical residues in agricultural products.

Science.gov (United States)

Choi, Shinai; Hong, Jiyeon; Lee, Dayeon; Paik, Minkyoung

2014-01-01

Continuous monitoring of chemical residues in agricultural and food products has been performed by various government bodies in South Korea. These bodies have made attempts to systematically manage this information by creating a monitoring database system as well as a system based on these data with which to assess the health risk of chemical residues in agricultural products. Meanwhile, a database system is being constructed consisting of information about monitoring and, following this, a demand for convenience has led to the need for an evaluation tool to be constructed with the data processing system. Also, in order to create a systematic and effective tool for the risk assessment of chemical residues in foods and agricultural products, various evaluation models are being developed, both domestically and abroad. Overseas, systems such as Dietary Exposure Evaluation Model: Food Commodity Intake Database and Cumulative and Aggregate Risk Evaluation System are being used; these use the US Environmental Protection Agency as a focus, while the EU has developed Pesticide Residue Intake Model for assessments of pesticide exposure through food intake. Following this, the National Academy of Agricultural Science (NAAS) created the Agricultural Products Risk Assessment System (APRAS) which supports the use and storage of monitoring information and risk assessments. APRAS efficiently manages the monitoring data produced by NAAS and creates an extraction feature included in the database system. Also, the database system in APRAS consists of a monitoring database system held by the NAAS and food consumption database system. Food consumption data is based on Korea National Health and Nutrition Examination Survey. This system is aimed at exposure and risk assessments for chemical residues in agricultural products with regards to different exposure scenarios.

Management for Construction Materials and Control of Construction Waste in Construction Industry: A Review

OpenAIRE

A. A. Gulghane; Prof P. V. Khandve

2015-01-01

In recent treads a wide range of building materials is available for the construction of civil engineering structures. The total cost of materials may be up to 60% or more of the total cost incurred in construction project dependent upon the type of project. Effective construction materials management is a key to success for a construction project. Construction waste is another serious problem in construction industry. A large and various types of construction waste with different...

Gendered Safety and Health Risks in the Construction Trades.

Science.gov (United States)

Curtis, Hannah M; Meischke, Hendrika; Stover, Bert; Simcox, Nancy J; Seixas, Noah S

2018-04-18

Despite women's increased representation in the overall workforce, construction remains a male-dominated industry. Prior studies have noted that the hazardous workplace environment combined with a culture that can be discriminatory and openly hostile can threaten women workers' health and safety. However, little information exists about the current physical and psychosocial hazards at work affecting tradeswomen. We examined differences in workplace exposure between women and men, and the association of these exposures with self-reported stress and work injury, in order to highlight how gendered conditions of work negatively affect tradeswomen's health. A holistic view of health that included the influence of both home and work spheres as well as hazards related to women's social experience was considered. Almost 300 workers (198 tradeswomen and 93 tradesmen) throughout Washington State completed surveys. We used descriptive statistics to compare exposures between genders, and logistic regression to model the association between psychosocial exposures and injury and stress outcomes. We found that women were significantly more likely than men to report high perceived stress (31 and 18%, respectively) and being injured at work in the past year (31 and 12%, respectively). Ten of the 12 work-related psychosocial exposures were found to be associated with either stress (job strain, gender and age discrimination, bullying, work/life balance, isolation, sexual harassment, safety climate, and social support) or injury (gender discrimination, bullying, overcompensation, and sexual harassment) for women. The industry continues to lag in supporting tradeswomen's health and safety needs. This study suggests that multiple exposures (including discrimination, overcompensation, and work/life balance) have an important impact on worker well-being. The findings underscore the complex interaction of gender, psychosocial exposures, and occupational risks, and indicate areas for

Workplace exposures and the risk of amyotrophic lateral sclerosis.

Science.gov (United States)

Fang, Fang; Quinlan, Patricia; Ye, Weimin; Barber, Marie K; Umbach, David M; Sandler, Dale P; Kamel, Freya

2009-09-01

Occupation has been suggested to play a role in amyotrophic lateral sclerosis (ALS) etiology, but detailed information on the importance of specific workplace exposures is lacking. Our aim was to assess the relationship between workplace exposures and the risk of ALS and to evaluate potential interactions between these exposures and smoking. We conducted a case-control study in New England between 1993 and 1996, comprising 109 cases and 253 controls who completed a structured interview covering occupations and workplace exposures. Unconditional logistic regression models were used to estimate the odds ratios (ORs) and 95% confidence intervals (CIs) for ALS. Analyses were conducted among the entire study population and after stratification by smoking. We observed a higher risk of ALS for construction workers excluding supervisors (OR = 2.9; 95% CI, 1.2-7.2) and precision metal workers (OR = 3.5; 95% CI, 1.2-10.5). Self-reported exposures to paint strippers; cutting, cooling, or lubricating oils; antifreeze or coolants; mineral or white spirits; and dry cleaning agents each appeared to be associated with a 60-90% higher risk. Specific chemicals related to a > 50% increase in risk of ALS included aliphatic chlorinated hydrocarbons, glycols, glycol ethers, and hexane. Relative risks associated with these workplace exposures and chemicals were greater among nonsmokers and persisted in mutually adjusted models. Our data suggest that certain occupations and workplace exposures may be associated with increased risk of ALS. These results need to be confirmed in independent populations.

Experimental investigation of thermophysical properties of eutectic Mo–C, graphite and tantalum at high temperatures

International Nuclear Information System (INIS)

Senchenko, V N; Belikov, R S; Popov, V S

2016-01-01

An experimental technique based on fast electrical heating for investigation of thermophysical properties of refractory materials under high pressures and at high temperatures is considered. A set of thermophysical properties of refractory materials such as specific enthalpy, specific heat capacity, specific resistivity, melting heat of eutectic Mo-C and thermal expansion of graphite and tantalum were determined. The obtained temperature of eutectic melting of MoC 0.82 shows close agreement with equilibrium Mo-C phase diagram. (paper)

Surveillance of construction worker injuries: the utility of trade-specific analysis.

Science.gov (United States)

Hunting, K L; Welch, L S; Nessel-Stephens, L; Anderson, J; Mawudeku, A

1999-07-01

Construction is a dangerous industry, with high rates of both fatal and nonfatal injuries. To learn more about the causes of nonfatal construction worker injuries, and to identify injury cases for further work site-based investigations or prevention programs, we established an emergency department-based surveillance program in November 1990. This article describes circumstances of injury, diagnoses, and demographic characteristics of injured construction workers for 2,791 cases identified through mid-August, 1997. Lacerations and strains and sprains were the most frequent diagnoses; cutting and piercing objects were the leading causes of injury among all construction workers, followed by falls and overexertion. Because of the variety of work performed in this industry, more detailed injury descriptions, by trade, are most useful for thinking about injury prevention. To illustrate this, we profile injury patterns among workers from four specific trades: carpenters, electricians, plumbers, and ironworkers. Areas of concern highlighted by the trade-specific analyses include eye injuries among plumbers; falls from ladders among electricians and plumbers; slips, trips, and falls on the same level among ironworkers; electrical exposure among electricians; and, amputations among carpenters.

Radiation protection programme for existing exposure situation

International Nuclear Information System (INIS)

Ramadhani, Hilali Hussein

2016-04-01

This study was conducted to develop the Radiation protection Programme (RPP) to ensure that measures are in place for protection of individuals from the existing source of exposure. The study established a number of protective and remedial actions to be considered by the responsible regulatory Authority, licensee for existing exposure in workplace and dwellings. Tanzania is endowed with a number NORMs processing industries with an experience of uncontrolled exploration and extraction of minerals and the use of unsafe mining methods leading to severe environmental damage and appalling living conditions in the mining communities. Some of NORMs industries have been abandoned due to lack of an effect management infrastructure. The residual radioactive materials have been found to be the most import source of existing exposure resulted from NORMs industries. The Radon gas and its progeny have also been found to be a source of existing exposure from natural source as well as the major source of risk and health effects associated with existing exposure situation. The following measures have been discovered to play a pivotal role in avoiding or reducing the source of exposure to individuals such as restriction of the use of the construction materials, restriction on the consumption of foodstuffs and restriction on the access to the land and buildings, the removal of the magnitude of the source in terms of activity concentration as well as improvement of ventilation in dwellings. Therefore, the regulatory body (Tanzania Atomic Energy Commission) should examine the major areas outlined in the established RRP for existing exposure situation resulted from the NORMs industries and natural sources so as to develop strategies that will ensure the adequate protection of members of the public and the environment as well as guiding operating organizations to develop radiation protection and safety measures for workers. (au)

Analysis of noise on construction sites of high-rise buildings.

Science.gov (United States)

Barkokébas, Béda; Vasconcelos, Bianca M; Lago, Eliane Maria G; Alcoforador, Aline Fabiana P

2012-01-01

In the civil construction industry sector, it has been observed that the increasing use of machines has made tasks noisier and consequently caused hearing loss and had other adverse effects on workers. The objective of this study was to identify and assess the physical risks of noise present in activities undertaken in a construction company in order to propose control measures which will contribute to the management of health and safety within the company's organization. The methodology applied was based on verifying the characteristics of exposure to noise on construction sites, from an observation of sources which generated noise and making measurements of sound pressure levels emitted by these sources. The data was then analyzed and compared with the recommended performance levels established in control measures. As a result, it was found that some machines and equipment used in civil construction often generate noise above the acceptable levels and as such, in these cases, various control measures have been proposed. It is believed that the use of management techniques is the most effective way to assess risk and to implement the preventive and corrective actions proposed, and allows for the analysis of sound pressure levels on an ongoing basis.

Chronic obstructive pulmonary disease and occupational exposure to silica.

Science.gov (United States)

Rushton, Lesley

2007-01-01

Prolonged exposure to high levels of silica has long been known to cause silicosis This paper evaluates the evidence for an increased risk of chronic obstructive pulmonary disease (COPD) in occupations and industries in which exposure to crystalline silica is the primary exposure, with a focus on the magnitude of risks and levels of exposure causing disabling health effects. The literature suggests consistently elevated risks of developing COPD associated with silica exposure in several occupations, including the construction industry; tunneling; cement industry; brick manufacturing; pottery and ceramic work; silica sand, granite and diatomaceous earth industries; gold mining; and iron and steel founding, with risk estimates being high in some, even after taking into account the effect of confounders like smoking. Average dust levels vary from about 0.5 mg.m3 to over 10 mg.m3 and average silica levels from 0.04 to over 5 mg.m3, often well above occupational standards. Factors influencing the variation from industry to industry in risks associated with exposure to silica-containing dusts include (a) the presence of other minerals in the dust, particularly when associated with clay minerals; (b) the size of the particles and percentage of quartz; (c) the physicochemical characteristics, such as whether the dust is freshly fractured. Longitudinal studies suggest that loss of lung function occurs with exposure to silica dust at concentrations of between 0.1 and 0.2 mg.m3, and that the effect of cumulative silica dust exposure on airflow obstruction is independent of silicosis. Nevertheless, a disabling loss of lung function in the absence of silicosis would not occur until between 30 and 40 years exposure.

Sorption of tritium and tritiated water on construction materials

International Nuclear Information System (INIS)

Dickson, R.S.; Miller, J.M.

1991-11-01

Sorption and desorption of tritium (HT) and tritiated water (HTO) on materials to be used in the construction of fusion facilities were studied. In ∼ 24-hour exposures in argon or room air, metal samples sorbed 8-200 μCi/m 2 of tritium from atmospheres of 5-9 Ci/m 3 HT, and non-metallic samples sorbed 60-800 μCi/m 2 from atmospheres of 14 Ci/m 3 HT. Sorption of HTO varied much more widely than HT sorption for different samples, ranging from 4 μCi/m 2 for glass to 1,300,000 μCi/m 2 for concrete samples, in 24-hour exposures to 1 Ci/m 3 HTO in room air. Time dependence of desorption in dry air showed a rapid initial process and a slower secondary process. (Author) (10 refs., 4 figs., 2 tabs.)

New Three-Dimensional Neutron Transport Calculation Capability in STREAM Code

Energy Technology Data Exchange (ETDEWEB)

Zheng, Youqi [Xi' an Jiaotong University, Xi' an (China); Choi, Sooyoung; Lee, Deokjung [UNIST, Ulsan (Korea, Republic of)

2016-10-15

The method of characteristics (MOC) is one of the best choices for its powerful capability in the geometry modeling. To reduce the large computational burden in 3D MOC, the 2D/1D schemes were proposed and have achieved great success in the past 10 years. However, such methods have some instability problems during the iterations when the neutron leakage for axial direction is large. Therefore, full 3D MOC methods were developed. A lot of efforts have been devoted to reduce the computational costs. However, it still requires too much memory storage and computational time for the practical modeling of a commercial size reactor core. Recently, a new approach for the 3D MOC calculation without transverse integration has been implemented in the STREAM code. In this approach, the angular flux is expressed as a basis function expansion form of only axial variable z. A new approach based on the axial expansion and 2D MOC sweeping to solve the 3D neutron transport equation is implemented in the STREAM code. This approach avoids using the transverse integration in the traditional 2D/1D scheme of MOC calculation. By converting the 3D equation into the 2D form of angular flux expansion coefficients, it also avoids the complex 3D ray tracing. Current numerical tests using two benchmarks show good accuracy of the new method.

In vitro catheter and sorbent-based method for clearance of radiocontrast material during cerebral interventions

Energy Technology Data Exchange (ETDEWEB)

Angheloiu, George O., E-mail: goangheloiu@drmc.org [Heart and Vascular Institute, University of Pittsburgh Medical Center, Pittsburgh, PA (United States); Department of Cardiology, Dubois Regional Medical Center, Dubois, PA (United States); Hänscheid, Heribert; Reiners, Christoph [Department of Nuclear Medicine, University of Würzburg, Würzburg (Germany); Anderson, William D. [Cardiology Department, Exempla Healthcare, Denver, CO (United States); Kellum, John A. [CRISMA Center, Department of Critical Care Medicine, University of Pittsburgh Medical Center, Pittsburgh, PA (United States)

2013-07-15

Background: Contrast-induced acute kidney injury is a severe condition resulting from the use of radiology contrast in patients with predisposing factors. Hypothesis: We hypothesized that a novel system including a device containing polymer resin sorbent beads and a custom-made suctioning catheter could efficiently remove contrast from an in vitro novel model of circulatory system (MOCS) mimicking the cerebral circulation. Methods: A custom-made catheter was built and optimized for cerebral venous approach. The efficiency of a system made of a polymer resin sorbent beads column (CST 401, Cytosorbents) and this particular catheter was tested in the MOCS running a solution composed of 0.9% saline and radio-contrast. During two series of 18 cycles of first-pass experiments we assessed the catheter's suctioning efficiency and the system's ability to clear radio-contrast injected into the MOCS's cerebral arterial segment. We also assessed the functioning and reliability of the MOCS. Results: Mean suctioning efficiency of the catheter was 84% ± 24%. The polymer sorbent column contrast removal rate was initially 96% and gradually decreased with subsequent cycles in a linear fashion during an experiment lasting approximately 90 minutes. The MOCS had a reliability of 0.9946×min{sup −1} where 1 × min{sup −1} was the optimum value. Conclusion: A system including a polymer resin sorbent beads column and a custom-made suctioning catheter had an excellent initial efficiency in quickly removing contrast from an artificial MOCS mimicking the cerebral circulation. MOCS is an inexpensive and relatively reliable custom-made system that can be used for training or testing purposes.

Estimation of exposure to sunlight of the liner under a tiled roof

DEFF Research Database (Denmark)

Holck, Ole; Rosenfeld, J.L.J.

2005-01-01

One construction for a pitched roof is to use tiles on battens, with a liner attached below the battens. The shape of some types of tiles is such that, at each corner where four tiles overlap, a small gap is formed. At certain positions of the sun solar radiation can penetrate through these gaps....... Simulations were carried out for a roof tilted at 25degrees, 35degrees or 45degrees, facing SE, S, SW or W. For the particular roof construction and gap studied, the maximum annual exposure of a 25 mm(2) piece of the liner placed 150 mm below the gap (corresponding to about 100 mm below the base of the tiles...... to the roof. Analytic expressions for the size of the illuminated area are obtained using a thick slit model. The accuracy of the model was assessed by some experimental measurements. The exposure over one year of the roof liner was calculated using the Design Reference Year for Copenhagen, Denmark...

Medial Olivocochlear Reflex Interneurons Are Located in the Posteroventral Cochlear Nucleus: A Kainic Acid Lesion Study in Guinea Pigs

OpenAIRE

De VENECIA, RONALD K.; LIBERMAN, M. CHARLES; GUINAN, JOHN J.; BROWN, M. CHRISTIAN

2005-01-01

The medial olivocochlear (MOC) reflex arc is probably a three-neuron pathway consisting of type I spiral ganglion neurons, reflex interneurons in the cochlear nucleus, and MOC neurons that project to the outer hair cells of the cochlea. We investigated the identity of MOC reflex interneurons in the cochlear nucleus by assaying their regional distribution using focal injections of kainic acid. Our reflex metric was the amount of change in the distortion product otoacoustic emission (at 2f1–f2)...

Coagulation mechanism of salt solution-extracted active component in Moringa oleifera seeds

OpenAIRE

Okuda, Tetsuji; Baes, Aloysius U.; Nishijima, Wataru; Okada, Mitsumasa

2001-01-01

This study focuses on the coagulation mechanism by the purified coagulant solution (MOC-SC-PC) with the coagulation active component extracted from M. oleifera seeds using salt solution. The addition of MOC-SC-PC into tap water formed insoluble matters. The formation was responsible for kaolin coagulation. On the other hand, insoluble matters were not formed when the MOC-SC-PC was added into distilled water. The formation was affected by Ca2+ or other bivalent cations which may connect each m...

A Ti plasmid-encoded enzyme required for degradation of mannopine is functionally homologous to the T-region-encoded enzyme required for synthesis of this opine in crown gall tumors.

Science.gov (United States)

Kim, K S; Chilton, W S; Farrand, S K

1996-06-01

The mocC gene encoded by the octopine/mannityl opine-type Ti plasmid pTi15955 is related at the nucleotide sequence level to mas1' encoded by the T region of this plasmid. While Mas1 is required for the synthesis of mannopine (MOP) by crown gall tumor cells, MocC is essential for the utilization of MOP by Agrobacterium spp. A cosmid clone of pTi15955, pYDH208, encodes mocC and confers the utilization of MOP on strain NT1 and on strain UIA5, a derivative of NT1 lacking the 450-kb cryptic plasmid pAtC58. NT1 or UIA5 harboring pYDH208 with an insertion mutation in mocC failed to utilize MOP as the sole carbon source. Plasmid pSa-C, which encodes only mocC, complemented this mutation in both strains. This plasmid also was sufficient to confer utilization of MOP on NT1 but not on UIA5. Computer analysis showed that MocC is related at the amino acid sequence level to members of the short-chain alcohol dehydrogenase family of oxidoreductases. Lysates prepared from Escherichia coli cells expressing mocC contained an enzymatic activity that oxidizes MOP to deoxyfructosyl glutamine (santhopine [SOP]) in the presence of NAD+. The reaction catalyzed by the MOP oxidoreductase is reversible; in the presence of NADH, the enzyme reduced SOP to MOP. The apparent Km values of the enzyme for MOP and SOP were 6.3 and 1.2 mM, respectively. Among analogs of MOP tested, only N-1-(1-deoxy-D-lyxityl)-L-glutamine and N-1-(1-deoxy-D-mannityl)-L-asparagine served as substrates for MOP oxidoreductase. These results indicate that mocC encodes an oxidoreductase that, as an oxidase, is essential for the catabolism of MOP. The reductase activity of this enzyme is precisely the reaction ascribed to its T-region-encoded homolog, Mas1, which is responsible for biosynthesis of mannopine in crown gall tumors.

Present situation of occupational radiation exposure in nuclear power plants

International Nuclear Information System (INIS)

Imabori, Akira

1979-01-01

The present situation of the radiation exposure of workers, including both employes and subcontractors, in the nuclear power plants in Japan, is presented. Twenty seven nuclear power reactors in operation and under construction are tabulated with the name, the owner, the electric output and the commissioning year of each plant. The results of exposure of the workers in these plants are shown, classifying the dose rate into less than 0.5 rem, 0.5 - 1.5 rem, 1.5 - 2.5 rem, 2.5 - 5 rem and more than 5 rem, and the workers into employes and subcontractors. It is noted that the exposure dose of the subcontractors occupies about 88% of all exposure dose, and the exposure is concentrated during regular inspection period. The exposure dose of about 80% of the workers is less than 0.5 rem, and no one was irradiated more than 5 rem in a year. The total exposure dose, which has especially the tendency of increasing with extended maintenance period and decreasing during plant operation period, shows also the trend of increasing with the lapse of operation years. As for the point of view of whole exposure dose, the value is 0.06 -- 0.43 man-rem/10 6 kWh in 1976 FY. It is considered to be necessary to grasp the total exposure dose of each worker wandering from one plant to another, and the central registration center for the workers in radioactive environment was established in 1978. The whole exposure dose data of each worker are stored in the central computer in this center. This system is highly appreciated in radiation exposure management. The total exposure dose is related to the rate of utilization of nuclear plants, and it is expected to decrease with the decrease of plant outage. (Nakai, Y.)

77 FR 3798 - Asbestos in Construction Standard; Extension of the Office of Management and Budget's (OMB...

Science.gov (United States)

2012-01-25

... Construction Standard (29 CFR 1926.1101). The standard protects workers from adverse health effects from... standard protects workers from adverse health effects from occupational exposure to asbestos, including... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0002...

Determinants of wheat antigen and fungal alpha-amylase exposure in bakeries.

Science.gov (United States)

Burstyn, I; Teschke, K; Bartlett, K; Kennedy, S M

1998-05-01

The study's objectives were to measure flour antigen exposure in bakeries and define the determinants of exposure. Ninety-six bakery workers, employed in seven different bakeries, participated in the study. Two side-by-side full-shift inhalable dust samples were obtained from each study participant on a single occasion. The flour antigen exposure was measured as wheat antigen and fungal alpha-amylase content of the water-soluble fraction of inhalable dust, assayed via enzyme-linked immunosorbent assays. During the entire sampling period bakers were observed and information on 14 different tasks was recorded at 15-minute intervals. Other production characteristics were also recorded for each sampling day and used in statistical modeling to identify significant predictors of exposure. The mean alpha-amylase antigen exposure was 22.0 ng/m3 (ranging from below the limit of detection of 0.1 ng/m3 to 307.1 ng/m3) and the mean wheat antigen exposure was 109 micrograms/m3 (ranging from below the limit of detection of 1 microgram/m3 to 1018 micrograms/m3). Regression models that explained 74% of variability in wheat antigen and alpha-amylase antigen exposures were constructed. The models indicated that tasks such as weighing, pouring, and operating dough-brakers increased flour antigen exposure, while packing and decorating resulted in lower exposures. Croissant, puff-pastry, and bread/bun production lines were associated with increased exposure, while cake production and substitution of dusting with the use of divider oil were associated with decreased exposure. Exposure levels can be reduced by the automation of forming tasks, alteration of tasks requiring pouring of flour, and changes to the types of products manufactured.

Radon hazard from caisson and tunnel construction in Kong Kong

International Nuclear Information System (INIS)

Lam, W.K.; Tsin, T.W.; Ng, T.P.

1988-01-01

A possible occupational risk of caisson and tunnel excavation in Hong Kong results from the inhalation of natural radon daughters. In this study radon daughter concentrations ranging from 0.001 to 71.4 WL were recorded in caissons of various dimensions and from 0.03 to 0.95 WL in tunnels over 1 km in length under construction (ICRP exposure limit being 0.4 WL). There was clear indication of increased radon daughter accumulation in confined and unventilated areas and in unventilated caissons an exponential increase of radon daughter concentration with the ratio of depth to cross-sectional area was observed (r=0.9). The study revealed a potential radiation hazard facing underground construction workers and this is being examined by an ongoing epidemiological cohort study: meanwhile environmental control should be improved. (UK)

Mapping information exposure on social media to explain differences in HPV vaccine coverage in the United States.

Science.gov (United States)

Dunn, Adam G; Surian, Didi; Leask, Julie; Dey, Aditi; Mandl, Kenneth D; Coiera, Enrico

2017-05-25

Together with access, acceptance of vaccines affects human papillomavirus (HPV) vaccine coverage, yet little is known about media's role. Our aim was to determine whether measures of information exposure derived from Twitter could be used to explain differences in coverage in the United States. We conducted an analysis of exposure to information about HPV vaccines on Twitter, derived from 273.8 million exposures to 258,418 tweets posted between 1 October 2013 and 30 October 2015. Tweets were classified by topic using machine learning methods. Proportional exposure to each topic was used to construct multivariable models for predicting state-level HPV vaccine coverage, and compared to multivariable models constructed using socioeconomic factors: poverty, education, and insurance. Outcome measures included correlations between coverage and the individual topics and socioeconomic factors; and differences in the predictive performance of the multivariable models. Topics corresponding to media controversies were most closely correlated with coverage (both positively and negatively); education and insurance were highest among socioeconomic indicators. Measures of information exposure explained 68% of the variance in one dose 2015 HPV vaccine coverage in females (males: 63%). In comparison, models based on socioeconomic factors explained 42% of the variance in females (males: 40%). Measures of information exposure derived from Twitter explained differences in coverage that were not explained by socioeconomic factors. Vaccine coverage was lower in states where safety concerns, misinformation, and conspiracies made up higher proportions of exposures, suggesting that negative representations of vaccines in the media may reflect or influence vaccine acceptance. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Monitoring of occupational exposure in manufacturing of stainless steel constructions. Part I: Chromium, iron, manganese, molybdenum, nickel and vanadium in the workplace air of stainless steel welders

International Nuclear Information System (INIS)

Kucera, J.; Hnatowicz, V.; Bencko, V.; Papayova, A.; Saligova, D.; Tejral, J.; Borska, L.

2000-01-01

Exposure to workplace airborne pollutants was examined in a group of 20 workers dealing mainly with welding, polishing, drilling and assembling of stainless steel constructions. Monitoring of airborne particulate matter (ARM) was performed using both personal and stationary samplers. For the personal full-shift monitoring, a SKC 224 PCRX-4 constant flow rate pump was used which was connected to a sampling head with mixed cellulose matched-weight filters having a diameter of 32 mm and a 0.8 μm pore size. The constant flow rate amounted to 2 L min -1 . For the stationary sampling, the ''Gent'' stacked filter unit PM10 sampler was used, operating at a flow rate of 16 L min -1 . It collects particles having an equivalent aerodynamic diameter (EAD) of less than 10,um in the separate ''coarse'' (2-10 μm EAD) and ''fine'' (< 2 μm EAD) size fractions on two sequential polycarbonate (Costar, Nuclepore) filters with a 47 mm diameter. The filters of both types were analyzed by instrumental neutron activation analysis (INAA). Of the elements determined, results for chromium, iron, manganese, molybdenum, nickel and vanadium are presented. Procedures for quality assurance of both sampling and analytical stages are described. Sampling of biological material for elemental analysis (hair, nails, urine and blood and/or serum) of exposed and control persons in contamination-free conditions was also performed. In addition, saliva samples were collected for studying immunological and genotoxicity aspects of occupational exposure. (author)

Bio-monitoring for the genotoxic assessment in road construction workers as determined by the buccal micronucleus cytome assay.

Science.gov (United States)

Çelik, Ayla; Yildirim, Seda; Ekinci, Seda Yaprak; Taşdelen, Bahar

2013-06-01

Buccal micronucleus cytome (BMCyt) assay monitors genetic damage, cell proliferation and cell death in humans exposed to occupational and environmental agents. BMCyt is used as an indicator of genotoxic exposure, since it is associated with chromosomal instability. There is little research on the occupational exposure among road construction workers for genotoxicity testing. In the present study, we evaluated MN frequencies and other nuclear changes, karyorrhexis (KR), karyolysis (KL), broken egg (BE), binucleate (BN), condensed chromatin cell (CCC), and picnotic cell (PC) in buccal mucosa cells of 40 road construction workers (twenty smokers and twenty non-smokers) and 40 control groups consisting of healthy persons (twenty smokers and twenty non-smokers). Microscopic observation was performed of 2000 cells per individual in both road construction workers and control group. In control and worker groups, for each person repair index (RI) was calculated via formula KR+L/BE+MN. The results showed a statistically significant increase in the frequency of MN in buccal epithelial cells of exposed group compared with control group (proad construction workers, RI is lower than the control group. There is a significant difference between workers and control group (proad paving operations are absorbed by workers and that asphalt fume exposure is able to significantly induce cytogenetic damage in buccal mucosa cells of workers after controlling some possible confounding factors, such as age, sex and smoking habits. In addition to determination of nuclear changes and the micronucleus, the determination of RI value presents a new approach to genotoxic bio-monitoring assessment studies of occupationally exposed population. Copyright © 2013 Elsevier Inc. All rights reserved.

Organic solvent exposure and depressive symptoms among licensed pesticide applicators in the Agricultural Health Study.

Science.gov (United States)

Siegel, Miriam; Starks, Sarah E; Sanderson, Wayne T; Kamel, Freya; Hoppin, Jane A; Gerr, Fred

2017-11-01

Although organic solvents are often used in agricultural operations, neurotoxic effects of solvent exposure have not been extensively studied among farmers. The current analysis examined associations between questionnaire-based metrics of organic solvent exposure and depressive symptoms among farmers. Results from 692 male Agricultural Health Study participants were analyzed. Solvent type and exposure duration were assessed by questionnaire. An "ever-use" variable and years of use categories were constructed for exposure to gasoline, paint/lacquer thinner, petroleum distillates, and any solvent. Depressive symptoms were ascertained with the Center for Epidemiologic Studies Depression Scale (CES-D); scores were analyzed separately as continuous (0-60) and dichotomous (distillates, and short duration of petroleum distillate exposure and continuous CES-D score (p < 0.05). Although nearly all associations were positive, fewer statistically significant associations were observed between metrics of solvent exposure and the dichotomized CES-D variable. Solvent exposures were associated with depressive symptoms among farmers. Efforts to limit exposure to organic solvents may reduce the risk of depressive symptoms among farmers.

Construction management

CERN Document Server

Pellicer, Eugenio; Teixeira, José C; Moura, Helder P; Catalá, Joaquín

2014-01-01

The management of construction projects is a wide ranging and challenging discipline in an increasingly international industry, facing continual challenges and demands for improvements in safety, in quality and cost control, and in the avoidance of contractual disputes. Construction Management grew out of a Leonardo da Vinci project to develop a series of Common Learning Outcomes for European Managers in Construction. Financed by the European Union, the project aimed to develop a library of basic materials for developing construction management skills for use in a pan-European context. Focused exclusively on the management of the construction phase of a building project from the contractor's point of view, Construction Management covers the complete range of topics of which mastery is required by the construction management professional for the effective delivery of new construction projects. With the continued internationalisation of the construction industry, Construction Management will be required rea...

Intrauterine exposure to tobacco and executive functioning in high school.

Science.gov (United States)

Rose-Jacobs, Ruth; Richardson, Mark A; Buchanan-Howland, Kathryn; Chen, Clara A; Cabral, Howard; Heeren, Timothy C; Liebschutz, Jane; Forman, Leah; Frank, Deborah A

2017-07-01

Executive functioning (EF), an umbrella construct encompassing gradual maturation of cognitive organization/management processes, is important to success in multiple settings including high school. Intrauterine tobacco exposure (IUTE) correlates with negative cognitive/behavioral outcomes, but little is known about its association with adolescent EF and information from real-life contexts is sparse. We evaluated the impact of IUTE on teacher-reported observations of EF in urban high school students controlling for covariates including other intrauterine and adolescent substance exposures. A prospective low-income birth cohort (51% male; 89% African American/Caribbean) was followed through late adolescence (16-18 years old). At birth, intrauterine exposures to cocaine and other substances (52% cocaine, 52% tobacco, 26% marijuana, 26% alcohol) were identified by meconium and/or urine assays, and/or maternal self-report. High school teachers knowledgeable about the student and unaware of study aims were asked to complete the Behavior Rating Inventory of Executive Functioning-Teacher Form (BRIEF-TF) annually. Teachers completed at least one BRIEF-TF for 131 adolescents. Multivariable analyses included controls for: demographics; intrauterine cocaine, marijuana, and alcohol exposures; early childhood exposures to lead; and violence exposure from school-age to adolescence. IUTE was associated with less optimal BRIEF-TF Behavioral Regulation scores (p <0.05). Other intrauterine substance exposures did not predict less optimal BRIEF-TF scores, nor did exposures to violence, lead, nor adolescents' own substance use. IUTE is associated with offspring's less optimal EF. Prenatal counseling should emphasize abstinence from tobacco, as well as alcohol and illegal substances. Copyright © 2017 Elsevier B.V. All rights reserved.

DETERMINANTS OF ECONOMIC EXPOSURE: AN EMPIRICAL EVIDENCE FROM THE MISCELLANEOUS COMPANIES IN INDONESIA

Directory of Open Access Journals (Sweden)

M. Shabri Abd. Majid

2015-12-01

Full Text Available This research empirically measures the economic exposure of 11 selected miscellaneous companies in Indonesia. It also attempts to empirically explore the influence of firm size, export, liquidity, and leverage on the economic exposure of those companies. Annual data from 2007 to 2010, which was collected from the www.idx.co.id and www.bi.go.id were used and analyzed by the multiple linear regression to measure the economic exposure and examine the influences of the firm size, export, liquidity, and leverage on the economic exposure. Both partial (t-test and simultaneous (F-test hypotheses were constructed and tested using the software of SPSS for Windows. The research documented that, with the exception of the liquidity, which has a negative and significant effect partially on the economic exposure, all other variables, i.e., the firm size, export, and leverage were found to have insignificant effects. Meanwhile, based on the F-test, the research found that the firm size, export, liquidity, and leverage affected simultaneously and significantly the economic exposure of the companies. These findings imply that in order to manage their economic exposure, the companies should control these variables, especially the liquidity.

Bioactive glass 13-93 as a subchondral substrate for tissue-engineered osteochondral constructs: a pilot study.

Science.gov (United States)

Jayabalan, Prakash; Tan, Andrea R; Rahaman, Mohammed N; Bal, B Sonny; Hung, Clark T; Cook, James L

2011-10-01

Replacement of diseased areas of the joint with tissue-engineered osteochondral grafts has shown potential in the treatment of osteoarthritis. Bioactive glasses are candidates for the osseous analog of these grafts. (1) Does Bioactive Glass 13-93 (BG 13-93) as a subchondral substrate improve collagen and glycosaminoglycan production in a tissue-engineered cartilage layer? (2) Does BG 13-93 as a culture medium supplement increase the collagen and glycosaminoglycan production and improve the mechanical properties in a tissue-engineered cartilage layer? In Study 1, bioactive glass samples (n = 4) were attached to a chondrocyte-seeded agarose layer to form an osteochondral construct, cultured for 6 weeks, and compared to controls. In Study 2, bioactive glass samples (n = 5) were cocultured with cell-seeded agarose for 6 weeks. The cell-seeded agarose layer was exposed to BG 13-93 either continuously or for the first or last 2 weeks in culture or had no exposure. Osteochondral constructs with a BG 13-93 base had improved glycosaminoglycan deposition but less collagen II content. Agarose scaffolds that had a temporal exposure to BG 13-93 within the culture medium had improved mechanical and biochemical properties compared to continuous or no exposure. When used as a subchondral substrate, BG 13-93 did not improve biochemical properties compared to controls. However, as a culture medium supplement, BG 13-93 improved the biochemical and mechanical properties of a tissue-engineered cartilage layer. BG 13-93 may not be suitable in osteochondral constructs but could have potential as a medium supplement for neocartilage formation.

Inhalation exposure during spray application and subsequent sanding of a wood sealant containing zinc oxide nanoparticles.

Science.gov (United States)

Cooper, Michael R; West, Gavin H; Burrelli, Leonard G; Dresser, Daniel; Griffin, Kelsey N; Segrave, Alan M; Perrenoud, Jon; Lippy, Bruce E

2017-07-01

Nano-enabled construction products have entered into commerce. There are concerns about the safety of manufactured nanomaterials, and exposure assessments are needed for a more complete understanding of risk. This study assessed potential inhalation exposure to ZnO nanoparticles during spray application and power sanding of a commercially available wood sealant and evaluated the effectiveness of local exhaust ventilation in reducing exposure. A tradesperson performed the spraying and sanding inside an environmentally-controlled chamber. Dust control methods during sanding were compared. Filter-based sampling, electron microscopy, and real-time particle counters provided measures of exposure. Airborne nanoparticles above background levels were detected by particle counters for all exposure scenarios. Nanoparticle number concentrations and particle size distributions were similar for sanding of treated versus untreated wood. Very few unbound nanoparticles were detected in aerosol samples via electron microscopy, rather nano-sized ZnO was contained within, or on the surface of larger airborne particles. Whether the presence of nanoscale ZnO in these aerosols affects toxicity merits further investigation. Mass-based exposure measurements were below the NIOSH Recommended Exposure Limit for Zn, although there are no established exposure limits for nanoscale ZnO. Local exhaust ventilation was effective, reducing airborne nanoparticle number concentrations by up to 92% and reducing personal exposure to total dust by at least 80% in terms of mass. Given the discrepancies between the particle count data and electron microscopy observations, the chemical identity of the airborne nanoparticles detected by the particle counters remains uncertain. Prior studies attributed the main source of nanoparticle emissions during sanding to copper nanoparticles generated from electric sander motors. Potentially contrary results are presented suggesting the sander motor may not have been

Astronaut Exposures to Ionizing Radiation in a Lightly-Shielded Spacesuit

Science.gov (United States)

Wilson, J. W.; Simonsen, L. C.; Shinn, J. L.; Kim, M.-H. Y.; Cucinotta, F. A.; Badavi, F. F.; Atwell, W.

1999-01-01

The normal working and living areas of the astronauts are designed to provide an acceptable level of protection against the hazards of ionizing radiation of the space environment. Still there are occasions when they must don a spacesuit designed mainly for environmental control and mobility and leave the confines of their better-protected domain. This is especially true for deep space exploration. The impact of spacesuit construction on the exposure of critical astronaut organs will be examined in the ionizing radiation environments of free space, the lunar surface and the Martian surface. The computerized anatomical male model is used to evaluate astronaut self-shielding factors and to determine space radiation exposures to critical radiosensitive human organs.

Model of care for a changing healthcare system: are there foundational pillars for design?

Science.gov (United States)

Booker, Catriona; Turbutt, Adam; Fox, Robyn

2016-04-01

Currently, healthcare organisations are being challenged to provide optimal clinical services within budget limitations while simultaneously being confronted by aging consumers and labour and skill shortages. Within this dynamic and changing environment, the ability to remain responsive to patient needs while managing these issues poses further challenges. Development or review of the model of care (MOC) may provide a possible solution to support efficiencies in service provision. Although MOC are not readily understood or appreciated as an efficiency strategy, they can be more easily explained by considering several recurring pillars when developing or redesigning an MOC. Generic and recurring foundational pillars include integrated care models, team functioning and communication, leadership, change management and lean thinking. These foundational pillars should be incorporated into the development and application of MOC in order to achieve desired outcomes. However, sustainability requires continuous review to enable improvement and must be integrated into routine business. Moreover, successful review of MOC requires collaboration and commitment by all stakeholders. Leaders are critical to motivating clinicians and stakeholders in the review process. Further, it is imperative that leaders engage stakeholders to commit to support the agreed strategies designed to provide efficient and comprehensive healthcare services. Redesign of MOC can significantly improve patient care by applying the agreed strategies. In the current healthcare environment, these strategies can favourably affect healthcare expenditure and, at the same time, improve the quality of interprofessional health services.

Noise Exposure Summary And Comparitive Analyses

Energy Technology Data Exchange (ETDEWEB)

Bumala, Philip A. [Tulane Univ., New Orleans, LA (United States). School of Public Health

2013-11-18

This paper summarizes and compares facility Operations and Maintenance (O&M) noise Dosimetry data to industry wide construction data. Dosimetry data has been compiled from a noise exposure assessment at a DOE national research facility Maintenance, Utilities, and Service Department (MUSD). This facility is the Lawrence Livermore National Laboratory (LLNL). The laboratory consists of ten O&M craft and trade shops responsible for a fifty year old infrastructure including over 300 buildings, and a worker population of approximately 7,000. The facility includes an extensive variety of noise generating activities throughout a one square mile site.

Polygons in Martian Frost

Science.gov (United States)

2003-01-01

MGS MOC Release No. MOC2-428, 21 July 2003This June 2003 Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a polygonal pattern developed in seasonal carbon dioxide frost in the martian southern hemisphere. The frost accumulated during the recent southern winter; it is now spring, and the carbon dioxide frost is subliming away. This image is located near 80.4oS, 200.2oW; it is illuminated by sunlight from the upper left, and covers an area 3 km (1.9 mi) across.

Clinimetric properties of the Brazilian-Portuguese version of the Quick Exposure Check (QEC

Directory of Open Access Journals (Sweden)

Maria L. C. Comper

Full Text Available BACKGROUND: Most of the available instruments aimed to assess risk exposure associated with work-related musculoskeletal disorders were originally developed in English, which makes their use difficult in countries such as Brazil. OBJECTIVE: To test the clinimetric properties of the Quick Exposure Check (QEC instrument previously adapted into Brazilian-Portuguese. METHOD: The original version of the QEC was translated and cross-culturally adapted into Brazilian-Portuguese and tested with 107 workers in two sectors of a textile factory. The internal consistency and construct validity were tested using only baseline values from the participants while reproducibility (reliability and agreement was evaluated in a test-retest design with a seven-day interval. RESULTS: The adapted version presented appropriate levels of internal consistency (Cronbach's α=0.76; moderate intra-observer reliability (ICCs ranging from 0.41 to 0.60; moderate to substantial inter-observer reliability (ICCs ranging between 0.62 and 0.86. The standard error of the measurement (SEM ranged from 8.3 to 11.2 points. Moderate levels of construct validity (Pearson's r=0.38 were observed. CONCLUSIONS: The Brazilian version of the QEC has appropriate clinimetric properties for measuring different levels of exposure to ergonomics risk factors and can now be used by Brazilian researchers and Occupational Health professionals.

Hygienic assessment of using rocks with high content of natural radionuclides in road construction

International Nuclear Information System (INIS)

Kornilov, A.N.; Ryabchikov, S.G.

1983-01-01

Experimental investigations on radiation hygienic assessment of the possibilities of using rocks with an increased content of natural radionuclides (NRN) are carried out. At experimental road portions constructed using such rocks, γ-radiation levels have been measured and radioactive contamination of the ad-- jacent territory has been determined. The danger presented by such roads for highway engineering workers and population also has been assessed. The results obtained permit to express a possitive opinion on the use of solid wastes with an increased NRN content for construction of roads with asphalt coating. Rocks with specific α-activity 3 Bq/kg are recommended to be used for any types of road construction, whereas wastes with specific α-activity 3 Bq/kg - only for road construction in an industrial zone, between populated areas and for thoroughfares and highways. The use of wastes with a higher NRN content is unreasonable as it leads to a growth of annular dose to population and excessive exposure of construction workers engaged in highway engineering operations

Construction history and construction management

International Nuclear Information System (INIS)

Agh, S.

1999-01-01

The process of pre-design and design preparation of the Mochovce NPP as well as the construction history of the plant is highlighted, including the financing aspect and problems arising from changes in the technological and other conditions of start-up of the reactor units. The results of international audits performed to improve the level of nuclear safety and implementation of the measures suggested are also described. The milestones of the whole construction process and start-up process, the control and quality system, and the methods of control and management of the complex construction project are outlined. (author)

Constructing Aligned Assessments Using Automated Test Construction

Science.gov (United States)

Porter, Andrew; Polikoff, Morgan S.; Barghaus, Katherine M.; Yang, Rui

2013-01-01

We describe an innovative automated test construction algorithm for building aligned achievement tests. By incorporating the algorithm into the test construction process, along with other test construction procedures for building reliable and unbiased assessments, the result is much more valid tests than result from current test construction…

Developing a Best-Evidence Pre-employment Medical Examination: An Example from the Construction Industry

Directory of Open Access Journals (Sweden)

Vincent Gouttebarge

2014-09-01

Full Text Available The Dutch construction industry has introduced a compulsory preemployment medical examination (PE-ME. Best-evidence contents related to specific job demands are, however, lacking and need to be gathered. After the identification of job demands and health problems in the construction industry (systematic literature search and expert meeting, specific job demands and related requirements were defined and instruments proposed. Finally, a work ability assessment was linked to the instruments' outcomes, resulting in the modular character of the developed PE-ME. Twenty-two specific job demands for all Dutch construction jobs were identified, including kneeling/squatting, working under time pressure, and exposure to hazardous substances. The next step was proposing self-report questions, screening questionnaires, clinical tests, and/or performance-based tests, leading to a work ability judgment. “Lifting/carrying” is described as an example. The new modular PE-ME enables a job-specific assessment of work ability to be made for more than 100 jobs in the Dutch construction industry.

The distribution of organic carbon fractions in a typical loess-paleosol profile and its paleoenvironmental significance

Directory of Open Access Journals (Sweden)

Qingqing Zhang

2018-04-01

Full Text Available Background The loess-paleosol sequence on the Loess Plateau has been considered an important paleoclimatic archive to study global climatic and environmental changes in the Quaternary. So far, little attention has been paid to the characteristics of soil organic carbon fractions in loess-paleosol sequences, which may provide valuable information for exploring the evolution of climate and environment in the Quaternary on the Loess Plateau. Methods In order to explore the significance of mineral-associated organic carbon to total organic carbon (MOC/TOC ratios in the loess-paleosol sequence for reconstructing paleoenvironmental and paleoclimatic evolution in the Quaternary on the Loess Plateau, we selected a typical loess-paleosol profile in Chunhua county, Xianyang city, Shaanxi province, as the research object. The content of total organic carbon (TOC and MOC/TOC ratio in each loess and paleosol layers of the Chunhua loess-paleosol profile were analyzed, together with the paleoclimatic proxies, such as soil grain size, CaCO3 content and their correlations with organic carbon parameters. Results The main results were as follows: (1 the total content of soil organic carbon and MOC/TOC ratios were generally higher in paleosol layers than in the underlying loess layers of the Chunhua loess-paleosol profile. Compared to total organic carbon content, MOC/TOC ratios changed more obviously in soil layers below a paleosol layer S8; (2 soil clay content and median grain size (Md (ϕ were higher in paleosol than in the underlying loess, while CaCO3 content showed an opposite tendency. In the Chunhua profile, the distribution characteristics of the three paleoclimatic proxies showed good indications of paleoclimate changes in the Quaternary; (3 in the Chunhua loess-paleosol profile, MOC/TOC ratios were positively correlated with clay content and median grain size (ϕ, while negatively correlated with CaCO3 content, and the correlations were more significant

The distribution of organic carbon fractions in a typical loess-paleosol profile and its paleoenvironmental significance

Science.gov (United States)

Hu, Feinan; Huo, Na; Shang, Yingni; Chang, Wenqian

2018-01-01

Background The loess-paleosol sequence on the Loess Plateau has been considered an important paleoclimatic archive to study global climatic and environmental changes in the Quaternary. So far, little attention has been paid to the characteristics of soil organic carbon fractions in loess-paleosol sequences, which may provide valuable information for exploring the evolution of climate and environment in the Quaternary on the Loess Plateau. Methods In order to explore the significance of mineral-associated organic carbon to total organic carbon (MOC/TOC) ratios in the loess-paleosol sequence for reconstructing paleoenvironmental and paleoclimatic evolution in the Quaternary on the Loess Plateau, we selected a typical loess-paleosol profile in Chunhua county, Xianyang city, Shaanxi province, as the research object. The content of total organic carbon (TOC) and MOC/TOC ratio in each loess and paleosol layers of the Chunhua loess-paleosol profile were analyzed, together with the paleoclimatic proxies, such as soil grain size, CaCO3 content and their correlations with organic carbon parameters. Results The main results were as follows: (1) the total content of soil organic carbon and MOC/TOC ratios were generally higher in paleosol layers than in the underlying loess layers of the Chunhua loess-paleosol profile. Compared to total organic carbon content, MOC/TOC ratios changed more obviously in soil layers below a paleosol layer S8; (2) soil clay content and median grain size (Md (ϕ)) were higher in paleosol than in the underlying loess, while CaCO3 content showed an opposite tendency. In the Chunhua profile, the distribution characteristics of the three paleoclimatic proxies showed good indications of paleoclimate changes in the Quaternary; (3) in the Chunhua loess-paleosol profile, MOC/TOC ratios were positively correlated with clay content and median grain size (ϕ), while negatively correlated with CaCO3 content, and the correlations were more significant in soil

Construction Management of Electromechanical Engineering Project in Petrochemical Construction

Directory of Open Access Journals (Sweden)

Xi Tao

2017-03-01

Full Text Available Petrochemical industry as a basic industry, occupies a pivotal position in the national economy, with the continuous development of science and technology, electromechanical automation in the petrochemical industry has been widely used to save a lot of labor but also greatly improve the oil Chemical industry production efficiency. Therefore, in the construction of petrochemical industry, mechanical and electrical engineering as part of it. It plays a vital role. Petrochemical industry with the production of high temperature and high pressure and flammable and explosive gas, can strengthen the construction of mechanical and electrical engineering specialization and construction management of scientific, has become the relationship between the smooth development of mechanical and electrical engineering and engineering quality of the key, A direct impact on the petrochemical construction of the overall construction quality. To this end, it is necessary for the construction of petrochemical construction of electromechanical engineering construction management to promote the construction of mechanical and electrical engineering management level gradually increased. This article on the machine Electric engineering project construction management were discussed with a view to the petrochemical construction in the relevant aspects of the need to provide reference for reference.

Industrial hygiene survey report of Millstone Nuclear Power Station No. 3 construction site, Waterford, Connecticut

International Nuclear Information System (INIS)

Zaebst, D.D.; Herrick, R.

1985-11-01

Personal and area air samples were analyzed for total dust, organic solvent vapors, and metals during spray, brush, and roller painting and paint removal operations at Millstone Nuclear Power Station Number 3 construction site, Waterford, Connecticut, March 1981. Solvent exposures were generally well below their relevant standards. Total dust exposures during paint removal ranged up to 1,000 milligrams per cubic meter (mg/m3) in the containment building. The OSHA standard for total dust is 15mg/m3. Exposures to lead dusts exceeded the OSHA standard of 0.05mg/m3 in the turbine, auxiliary, and containment buildings. Chromium exposures were generally below the OSHA standard of 1mg/m3, except for 2.4mg/m3 in a personal sample taken during paint removal in the containment building. Very few engineering controls other than 3M single use respirators were observed. The authors note that the chromium exposure data is difficult to interpret as the form of the chromium is not known. If the chromium existed as hexavalent chromium exposure was excessive. The authors conclude that in view of the measured exposures to total dust, lead, and chromium, engineering controls and respiratory protection are inadequate. Recommendations include implementing better controls and respiratory protection

Research on construction quality and improvement of assembly construction

Science.gov (United States)

Cheng, Fei

2017-11-01

Based on the acceleration of the urbanization process and the improvement of the quality of life of our residents, the demand for building construction has been increasing. In this context, the construction industry in order to promote the construction efficiency, quality improvement, to meet the needs of the development of the times to strengthen the new technology, the use of new technologies. At present, China’s engineering construction units in the process of carrying out the project to strengthen the use of assembly-type construction technology, which thus achieved for the traditional construction work low-level, high time-consuming issues, and promote the steady improvement of production efficiency. Based on this, this paper focuses on the analysis of the connotation of the assembly structure and analyzes the quality problems in the construction process of the construction projects and puts forward the improvement measures to promote the improvement of the building quality and the construction of the building Construction speed. Based on this, this paper analyzes the structural system and design of prefabricated building.

Total and respirable dust exposures among carpenters and demolition workers during indoor work in Denmark

DEFF Research Database (Denmark)

Kirkeskov, Lilli; Hanskov, Dorte Jessing Agerby; Brauer, Charlotte

2016-01-01

BACKGROUND: Within the construction industry the risk of lung disorders depends on the specific professions probably due to variations in the levels of dust exposure, and with dust levels depending on the work task and job function. We do not know the extent of exposure in the different professions...... was 3.90 (95 % confidence interval 1.13-13.5) mg/m(3). Dust exposure varied depending on work task for both professions. The dustiest work occurred during demolition, especially when it was done manually. Only few workers used personal respiratory protection and only while performing the dustiest work...... or the variation between the different work tasks. The purpose of this study was therefore to assess if there were differences in dust exposure between carpenters and demolition workers who were expected to have low and high dust exposure, respectively. METHODS: Through interviews of key persons...

Involving construction in the preliminary engineering process

International Nuclear Information System (INIS)

Mahoney, D.T. Jr.; Boccieri, S.V. Jr.

1994-01-01

With today's high cost associated with modifications in nuclear power plants, it is imperative that the authors continue to investigate ways to cut costs but at the same time improve efficiency and reduce radiation exposure to those directly associated with the implementation of modifications. The success associated with involving construction in the preliminary engineering process will not only cut costs and improve efficiency but will establish a Team Building concept to provide accountability to all those associated with the implementation of the task. This form of partnering focuses on the solutions rather than highlighting the difficulties. This paper will demonstrate techniques to implement such ideas and provide examples to corroborate actual successes already achieved

Accident Causal Factors on the Building Construction Sites: A Review

Directory of Open Access Journals (Sweden)

Opeyemi Samuel Williams

2018-01-01

Full Text Available The concerns for cost, quality and timely delivery of projects have been in existence from time immemorial, whereas the passion for these should be extended to safe execution of site works by the construction participants, as safety of life is very paramount. However, high level of commitment that is essential for the safe execution of site works has become a taboo. Hence, a plethora of accidents takes place on the site ranging from falls from height, contact with working tools, vehicle-related, slip and trip, collapse, exposure to harmful substances, to lifting and handling object accidents. It is pertinent to know that, responsibility for accidents on site cuts across all project participants (clients, consultants, contractors, workers, as well as the construction site environment. Recognition of the construction participants and site environmental factors as agents of accident is the focus of this research. Through extensive review of literature, a copious number of factors were identified and subsequently grouped under five factors as client-related, consultant-related, contractor-related, construction workers-related, and construction site-related. However, there has been a dearth of research in the grouping of accident contributing factors. The identification and understanding of these factors will go a long way in mitigating construction accidents, coupled with proven measures taken in positively addressing them. Efforts to prevent these causative factors include inter alia elimination of hazards from design, effective safety management, adequate planning of activities and employment of seasoned professionals by the client. The contractors are to embark on staff safety auditing, set up safety committees, conduct regular training for staff, use innovative technology, uphold housekeeping and report accident occurrence, while strict adherence to safety regulations must be adopted by all construction operatives.

The margin of internal exposure (MOIE) concept for dermal risk assessment based on oral toxicity data - A case study with caffeine.

Science.gov (United States)

Bessems, Jos G M; Paini, Alicia; Gajewska, Monika; Worth, Andrew

2017-12-01

Route-to-route extrapolation is a common part of human risk assessment. Data from oral animal toxicity studies are commonly used to assess the safety of various but specific human dermal exposure scenarios. Using theoretical examples of various user scenarios, it was concluded that delineation of a generally applicable human dermal limit value is not a practicable approach, due to the wide variety of possible human exposure scenarios, including its consequences for internal exposure. This paper uses physiologically based kinetic (PBK) modelling approaches to predict animal as well as human internal exposure dose metrics and for the first time, introduces the concept of Margin of Internal Exposure (MOIE) based on these internal dose metrics. Caffeine was chosen to illustrate this approach. It is a substance that is often found in cosmetics and for which oral repeated dose toxicity data were available. A rat PBK model was constructed in order to convert the oral NOAEL to rat internal exposure dose metrics, i.e. the area under the curve (AUC) and the maximum concentration (C max ), both in plasma. A human oral PBK model was constructed and calibrated using human volunteer data and adapted to accommodate dermal absorption following human dermal exposure. Use of the MOIE approach based on internal dose metrics predictions provides excellent opportunities to investigate the consequences of variations in human dermal exposure scenarios. It can accommodate within-day variation in plasma concentrations and is scientifically more robust than assuming just an exposure in mg/kg bw/day. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Climate change and health: Indoor heat exposure in vulnerable populations

International Nuclear Information System (INIS)

White-Newsome, Jalonne L.; Sánchez, Brisa N.; Jolliet, Olivier; Zhang, Zhenzhen; Parker, Edith A.; Timothy Dvonch, J.; O'Neill, Marie S.

2012-01-01

Introduction: Climate change is increasing the frequency of heat waves and hot weather in many urban environments. Older people are more vulnerable to heat exposure but spend most of their time indoors. Few published studies have addressed indoor heat exposure in residences occupied by an elderly population. The purpose of this study is to explore the relationship between outdoor and indoor temperatures in homes occupied by the elderly and determine other predictors of indoor temperature. Materials and methods: We collected hourly indoor temperature measurements of 30 different homes; outdoor temperature, dewpoint temperature, and solar radiation data during summer 2009 in Detroit, MI. We used mixed linear regression to model indoor temperatures' responsiveness to weather, housing and environmental characteristics, and evaluated our ability to predict indoor heat exposures based on outdoor conditions. Results: Average maximum indoor temperature for all locations was 34.85 °C, 13.8 °C higher than average maximum outdoor temperature. Indoor temperatures of single family homes constructed of vinyl paneling or wood siding were more sensitive than brick homes to outdoor temperature changes and internal heat gains. Outdoor temperature, solar radiation, and dewpoint temperature predicted 38% of the variability of indoor temperatures. Conclusions: Indoor exposures to heat in Detroit exceed the comfort range among elderly occupants, and can be predicted using outdoor temperatures, characteristics of the housing stock and surroundings to improve heat exposure assessment for epidemiological investigations. Weatherizing homes and modifying home surroundings could mitigate indoor heat exposure among the elderly.

Geothermal energy probes. Increasing the radiation exposures of the population?

International Nuclear Information System (INIS)

Melzer, Danica; Wilhelm, Christoph

2014-01-01

In Baden-Wuerttemberg 10 private geothermal drilling projects in geologically interesting areas have been accompanied by measurements. During the drillings samples of the excavated earth were taken to determine the concentration of natural nuclides in the bored strata. Before and after finishing the geothermal construction works the airborne radon concentration of surrounding dwellings was measured. On the basis of the obtained measuring data the maximum expected additional effective annual doses received by individuals as a result of geothermal drilling were calculated. The exposure pathways were observed, i.e. air, water, sold - plant - human and terrestrial gamma radiation. In spite of conservative accounts in each case that should be considered as worst case scenario no relevant increase of radiation exposure could be detected. (orig.)

Molybdenum cofactor deficiency causes translucent integument, male-biased lethality, and flaccid paralysis in the silkworm Bombyx mori.

Science.gov (United States)

Fujii, Tsuguru; Yamamoto, Kimiko; Banno, Yutaka

2016-06-01

Uric acid accumulates in the epidermis of Bombyx mori larvae and renders the larval integument opaque and white. Yamamoto translucent (oya) is a novel spontaneous mutant with a translucent larval integument and unique phenotypic characteristics, such as male-biased lethality and flaccid larval paralysis. Xanthine dehydrogenase (XDH) that requires a molybdenum cofactor (MoCo) for its activity is a key enzyme for uric acid synthesis. It has been observed that injection of a bovine xanthine oxidase, which corresponds functionally to XDH and contains its own MoCo activity, changes the integuments of oya mutants from translucent to opaque and white. This finding suggests that XDH/MoCo activity might be defective in oya mutants. Our linkage analysis identified an association between the oya locus and chromosome 23. Because XDH is not linked to chromosome 23 in B. mori, MoCo appears to be defective in oya mutants. In eukaryotes, MoCo is synthesized by a conserved biosynthesis pathway governed by four loci (MOCS1, MOCS2, MOCS3, and GEPH). Through a candidate gene approach followed by sequence analysis, a 6-bp deletion was detected in an exon of the B. mori molybdenum cofactor synthesis-step 1 gene (BmMOCS1) in the oya strain. Moreover, recombination was not observed between the oya and BmMOCS1 loci. These results indicate that the BmMOCS1 locus is responsible for the oya locus. Finally, we discuss the potential cause of male-biased lethality and flaccid paralysis observed in the oya mutants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Literature review: Assessment of DWPF melter and melter off-gas system lifetime

Energy Technology Data Exchange (ETDEWEB)

Reigel, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-07-30

A glass melter for use in processing radioactive waste is a challenging environment for the materials of construction (MOC) resulting from a combination of high temperatures, chemical attack, and erosion/corrosion; therefore, highly engineered materials must be selected for this application. The focus of this report is to review the testing and evaluations used in the selection of the Defense Waste Processing Facility (DWPF), glass contact MOC specifically the Monofrax® K-3 refractory and Inconel® 690 alloy. The degradation or corrosion mechanisms of these materials during pilot scale testing and in-service operation were analyzed over a range of oxidizing and reducing flowsheets; however, DWPF has primarily processed a reducing flowsheet (i.e., Fe²⁺/ΣFe of 0.09 to 0.33) since the start of radioactive operations. This report also discusses the materials selection for the DWPF off-gas system and the corrosion evaluation of these materials during pilot scale testing and non-radioactive operations of DWPF Melter #1. Inspection of the off-gas components has not been performed during radioactive operations with the exception of maintenance because of plugging.

Literature review: Assessment of DWPF melter and melter off-gas system lifetime

Energy Technology Data Exchange (ETDEWEB)

Reigel, M. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-07-30

A glass melter for use in processing radioactive waste is a challenging environment for the materials of construction (MOC) resulting from a combination of high temperatures, chemical attack, and erosion/corrosion; therefore, highly engineered materials must be selected for this application. The focus of this report is to review the testing and evaluations used in the selection of the Defense Waste Processing Facility (DWPF), glass contact MOC specifically the Monofrax^® K-3 refractory and Inconel^® 690 alloy. The degradation or corrosion mechanisms of these materials during pilot scale testing and in-service operation were analyzed over a range of oxidizing and reducing flowsheets; however, DWPF has primarily processed a reducing flowsheet (i.e., Fe²⁺/ΣFe of 0.09 to 0.33) since the start of radioactive operations. This report also discusses the materials selection for the DWPF off-gas system and the corrosion evaluation of these materials during pilot scale testing and non-radioactive operations of DWPF Melter #1. Inspection of the off-gas components has not been performed during radioactive operations with the exception of maintenance because of plugging.

Potential and Benefits of Building Information Modeling (BIM During Pre-Construction, Construction and Post Construction Stage

Directory of Open Access Journals (Sweden)

Aw Nien Wei

2017-11-01

Full Text Available The construction industry is the main economic support for all countries around the world in which continually adapting to meet competitive challenges around the global market. Nevertheless, the construction project is becoming much more complex and difficult to manage. This is because the construction project involves a large number of stakeholder, for example, the consultant companies, architects, engineers, building surveyors and quantity surveyors. The technology currently used in the construction industry is the AutoCAD (Automatic computeraided design. AutoCAD is a commercial software application for 2D and 3D computer-aided design (CAD and drafting develop by Autodesk. Generally, all the drawing design from Autocad will be exchanged among the stakeholder in the form of paper. Information exchanged among them mostly involves a lot of documents and drawings. This practice creates errors because of documents and drawings are mostly in a paper-based format that is not properly managed which results in miscommunication among them. Having wrong information in the construction process could hinder the productivity of projects because in a construction project information is one of the important construction materials. Building Information Modeling (BIM is one of the newly software in the architecture, engineering, and construction (AEC industries to ensure all parties receive the right information. BIM technology is also an intelligent model of a building constructed digitally in the way of 3D. The software will generate model containing the information needed to support the construction, fabrication, and procurement activities that needed to realize the building. This paper will discuss on potential and benefits of BIM during pre-construction stage, construction stage and during post construction stage

Magnesium oxychloride cement concrete

Indian Academy of Sciences (India)

The durability of MOC concrete compositions against extreme environmental conditions viz. heating–cooling, freezing–thawing, wetting–drying and penetration and deposition of salts etc were investigated. The results reveal that MOC concrete has high compressive strength associated with high flexural strength and the ...

A spatiotemporal multi-hazard exposure assessment based on property data

Science.gov (United States)

Fuchs, Sven; Keiler, Margreth; Zischg, Andreas

2016-04-01

The paper presents a nation-wide spatially explicit object-based assessment of buildings and citizens exposed to natural hazards in Austria, including river flooding, torrential flooding, and snow avalanches. The assessment was based on two different datasets, (a) hazard information providing input to the exposure of elements at risk, and (b) information on the building stock combined from different spatial data available on the national level. Hazard information was compiled from two different sources. For torrential flooding and snow avalanches available local-scale hazard maps were used, and for river flooding the results of the countrywide flood modelling eHORA were available. Information on the building stock contained information on the location and size of each building, as well as on the building category and the construction period. Additional information related to the individual floors, such as their height and net area, main purpose and configuration, was included for each property. Moreover, this dataset has an interface to the population register and allowed therefore retrieving the number of primary residents for each building. With the exception of sacral buildings, an economic module was used to compute the monetary value of buildings using (a) the information of the building register such as building type, number of storeys and utilisation, and (b) regionally averaged construction costs. It is shown that the repeatedly-stated assumption of increasing exposure due to continued population growth and related increase in assets has to be carefully evaluated by the local development of building stock. While some regions have shown a clearly above-average increase in assets, other regions were characterised by a below-average development. This mirrors the topography of the country, but also the different economic activities. While hotels and hostels are extraordinary prone to torrential flooding, commercial buildings as well as buildings used for

Development of a construct-based risk assessment framework for genetic engineered crops.

Science.gov (United States)

Beker, M P; Boari, P; Burachik, M; Cuadrado, V; Junco, M; Lede, S; Lema, M A; Lewi, D; Maggi, A; Meoniz, I; Noé, G; Roca, C; Robredo, C; Rubinstein, C; Vicien, C; Whelan, A

2016-10-01

Experience gained in the risk assessment (RA) of genetically engineered (GE) crops since their first experimental introductions in the early nineties, has increased the level of familiarity with these breeding methodologies and has motivated several agencies and expert groups worldwide to revisit the scientific criteria underlying the RA process. Along these lines, the need to engage in a scientific discussion for the case of GE crops transformed with similar constructs was recently identified in Argentina. In response to this need, the Argentine branch of the International Life Sciences Institute (ILSI Argentina) convened a tripartite working group to discuss a science-based evaluation approach for transformation events developed with genetic constructs which are identical or similar to those used in previously evaluated or approved GE crops. This discussion considered new transformation events within the same or different species and covered both environmental and food safety aspects. A construct similarity concept was defined, considering the biological function of the introduced genes. Factors like environmental and dietary exposure, familiarity with both the crop and the trait as well as the crop biology, were identified as key to inform a construct-based RA process.

A Ti plasmid-encoded enzyme required for degradation of mannopine is functionally homologous to the T-region-encoded enzyme required for synthesis of this opine in crown gall tumors.

OpenAIRE

Kim, K S; Chilton, W S; Farrand, S K

1996-01-01

The mocC gene encoded by the octopine/mannityl opine-type Ti plasmid pTi15955 is related at the nucleotide sequence level to mas1' encoded by the T region of this plasmid. While Mas1 is required for the synthesis of mannopine (MOP) by crown gall tumor cells, MocC is essential for the utilization of MOP by Agrobacterium spp. A cosmid clone of pTi15955, pYDH208, encodes mocC and confers the utilization of MOP on strain NT1 and on strain UIA5, a derivative of NT1 lacking the 450-kb cryptic plasm...

Evaluation of primary DNA damage, cytogenetic biomarkers and genetic polymorphisms for CYP1A1 and GSTM1 in road tunnel construction workers.

Science.gov (United States)

Villarini, M; Moretti, M; Fatigoni, C; Agea, E; Dominici, L; Mattioli, A; Volpi, R; Pasquini, R

2008-01-01

In tunnel construction workers, occupational exposure to dust (alpha-quartz and other particles from blasting), gases (nitrogen dioxide, NO(2)), diesel exhausts, and oil mist has been associated with lung function decline, induction of inflammatory reactions in the lungs with release of mediators that may influence blood coagulation, and increased risk of chronic obstructive pulmonary disease. The present molecular epidemiology study was designed to evaluate whether occupational exposure to indoor pollutants during road tunnel construction might result in genotoxic effects. A study group of 39 underground workers and a reference group of 34 unexposed subjects were examined. Primary and oxidative DNA damage, sister-chromatid exchanges (SCE), and micronuclei (MN) were measured in peripheral blood cells. The possible influences of polymorphisms in gene encoding for CYP1A1 and GSTM1 xenobiotic-metabolizing enzymes were also investigated. Exposure assessment was performed with detailed interviews and questionnaires. There were no significant differences in the level of primary and oxidative DNA damage and frequency of SCE between the tunnel workers and controls, whereas the frequency of MN showed a significant increase in exposed subjects compared to controls. No effects of CYP1A1 or GSTM1 variants were observed for the analyzed biomarkers. Since MN in peripheral blood lymphocytes are recognized as a predictive biomarker of cancer risk within a population of healthy subjects, the genotoxic risk of occupational exposure to various indoor environmental pollutants during road tunnel construction cannot be excluded by this biomonitoring study.

Ruthenium nanoparticles decorated curl-like porous carbons for high performance supercapacitors

Science.gov (United States)

Lou, Bih-Show; Veerakumar, Pitchaimani; Chen, Shen-Ming; Veeramani, Vediyappan; Madhu, Rajesh; Liu, Shang-Bin

2016-01-01

The synthesis of highly dispersed and stable ruthenium nanoparticles (RuNPs; ca. 2-3 nm) on porous activated carbons derived from Moringa Oleifera fruit shells (MOC) is reported and were exploited for supercapacitor applications. The Ru/MOC composites so fabricated using the biowaste carbon source and ruthenium acetylacetonate as the co-feeding metal precursors were activated at elevated temperatures (600-900 oC) in the presence of ZnCl2 as the pore generating and chemical activating agent. The as-prepared MOC carbonized at 900 oC was found to possess a high specific surface area (2522 m2 g-1) and co-existing micro- and mesoporosities. Upon incorporating RuNPs, the Ru/MOC nanocomposites loaded with modest amount of metallic Ru (1.0-1.5 wt%) exhibit remarkable electrochemical and capacitive properties, achiving a maximum capacitance of 291 F g-1 at a current density of 1 A g-1 in 1.0 M H2SO4 electrolyte. These highly stable and durable Ru/MOC electrodes, which can be facily fabricated by the eco-friendly and cost-effective route, should have great potentials for practical applications in energy storage, biosensing, and catalysis.

The method of modular characteristic direction probabilities in MPACT

Energy Technology Data Exchange (ETDEWEB)

Liu, Z. [School of Nuclear Science and Technology, Xi' an Jiaotong University, No. 28 Xianning west road, Xi' an, Shaanxi 710049 (China); Kochunas, B.; Collins, B.; Downar, T. [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, 2200 Bonisteel, Ann Arbor, MI 48109 (United States); Wu, H. [School of Nuclear Science and Technology, Xi' an Jiaotong University, No. 28 Xianning west road, Xi' an, Shaanxi 710049 (China)

2013-07-01

The method of characteristic direction probabilities (CDP) is based on a modular ray tracing technique which combines the benefits of the collision probability method (CPM) and the method of characteristics (MOC). This past year CDP was implemented in the transport code MPACT for 2-D and 3-D transport calculations. By only coupling the fine mesh regions passed by the characteristic rays in the particular direction, the scale of the probabilities matrix is much smaller compared to the CPM. At the same time, the CDP has the same capacity of dealing with the complicated geometries with the MOC, because the same modular ray tracing techniques are used. Results from the C5G7 benchmark problems are given for different cases to show the accuracy and efficiency of the CDP compared to MOC. For the cases examined, the CDP and MOC methods were seen to differ in k{sub eff} by about 1-20 pcm, and the computational efficiency of the CDP appears to be better than the MOC for some problems. However, in other problems, particularly when the CDP matrices have to be recomputed from changing cross sections, the CDP does not perform as well. This indicates an area of future work. (authors)

Time and frequency characteristics of temporary threshold shifts caused by pure tone exposures

DEFF Research Database (Denmark)

Ordoñez, Rodrigo Pizarro; Hammershøi, Dorte

2011-01-01

The time-frequency characteristics of Temporary Threshold Shifts (TTS) caused by pure tones were determined using the Békésy audiometric method with narrow-band noise of short duration as the probe stimuli. Two experiments were done using exposures of 3 min at 100 dB above threshold. In the first....... In the second experiment, the TTS recovery curve produced by a 1 kHz pure tone exposure was assessed at 1.5 kHz, at approximately 15 s intervals for the first 5 min and at regularly increasing intervals up to 45 min after the exposure. The results showed a maximum in the recovery around 2 min after the exposure....... The data gathered in these experiments were used to construct a mathematical model of TTS recovery. The model describes both the 1/2-octave shift and the 2 min bounce and it can be used in the comparison of temporary changes in auditory function, assessed at different times and frequencies....

Using the Reggio Exhibit to Enrich Teacher Candidates' Perceptions of How Children Construct and Represent Knowledge

Science.gov (United States)

Ede, Anita R.; Da Ros-Voseles, Denise A.

2010-01-01

This teacher research study explores the changes in early childhood teacher candidates' perceptions of how children construct and represent knowledge following repeated exposure to "The Wonder of Learning: the Hundred Languages of Children" exhibit. When the renowned exhibit from Reggio Emilia was housed on the study participants' campus for 6…

Workers’ cytokines profiling upon exposure to MWCNT aerosol in occupational settings

Science.gov (United States)

Fatkhutdinova, L. M.; Khaliullin, T. O.; Zalyalov, R. R.; Vasilyeva, O. L.; Valeeva, I. Kh; Mustafin, I. G.

2015-11-01

Recent studies have found that upon pulmonary exposure to multi-walled carbon nanotubes (MWCNTs) animals develop primarily fibrosis and granulomas in lungs. In vitro and in vivo studies also give reason to assume that local exposure could be related to remote effects, including immune system and the endothelium. To investigate the remote effect hypothesis, we have analyzed blood, nasal lavage and induced sputum samples taken from workers in the frame of the Russian epidemiological study on Carbon Nanotubes Exposure and Risk Assessment (CNT-ERA). In serum and nasal lavage no significant differences between exposure and control groups were observed with a high variability to the cytokines content. In the samples of induced sputum from exposed workers the content of IL-1b, IL-6, IL-8, TNF-a, IL-4, IL-5, IFN-g exceeded the control group values, but after the regression models construction and bootstrap analysis, significant differences were found only for IL-1b. This study could not provide evidences of blood cytokines changes following local cytokine production in airways in workers exposed to MWCNTs. Cytokines variability in serum and nasal lavage may indicate the absence of severe systemic inflammatory response upon the existing occupational exposure to MWCNTs. Other systemic responses (including allergy-like or autoimmune reactions) should be regarded as well.

Creation of a community violence exposure scale: accounting for what, who, where, and how often.

Science.gov (United States)

Suglia, Shakira Franco; Ryan, Louise; Wright, Rosalind J

2008-10-01

Previous research has used the Rasch model, a method for obtaining a continuous scale from dichotomous survey items measuring a single latent construct, to create a scale of community violence exposure. The authors build upon previous work and describe the application of a Rasch model using the continuation ratio model to create an exposure to community violence (ETV) scale including event circumstance information previously shown to modify the impact of experienced events. They compare the Rasch ETV scale to a simpler sum ETV score, and estimate the effect of ETV on child posttraumatic stress symptoms. Incorporating detailed event circumstance information that is grounded in traumatic stress theory may reduce measurement error in the assessment of children's community violence exposure.

Evaluation of hand-arm and whole-body vibrations in construction and property management.

Science.gov (United States)

Coggins, Marie A; Van Lente, Eric; McCallig, Margaret; Paddan, Gurmail; Moore, Ken

2010-11-01

To identify and measure the magnitude of hand-arm vibration (HAV) and whole-body vibration (WBV) sources (tools, vehicles etc.) in use within a previously unexamined sector: a construction and property management company. To evaluate the effect of factors such as age of tool, materials being worked on, number and location of tool handles, tool weight, and manufacturer brand on HAV magnitude and the effect of factors such as manufacturer machine brand, terrain, and work task on WBV magnitude. This study was carried out in a construction and property management company, employees (n = 469) working in the engineering services and maintenance departments who use vibrating equipment as part of their work were invited to participate. Two hundred and eighty-nine employees working as general operatives, excavator drivers, stone masons, carpenters, labourers, fitters, welders, and gardeners agreed to participate. A total of 20 types of hand tool (n = 264) and 11 types of vehicle (n = 158) in use within the company were selected for inclusion in the study. Five pieces of equipment had never previously been measured. Vibration measurements were carried out in accordance with ISO 5349-1 (Mechanical vibration-measurement and assessment of human exposure to hand transmitted vibration-Part 1: general guidance. 2001) (HAV) and ISO 2631-1 (Mechanical vibration and shock: evaluation of human exposure to WBV in the working environment. Part 1-general requirements. 1997) (WBV). Vibration measurements were made while workers were operating the equipment as part of their normal work activities. A wide range of vibration emission values were recorded for most tool types, e.g. orbital sanders (1.39-10.90 m s⁻²) and angle grinders (0.28-12.25 m s⁻²), and vehicle, e.g. forklifts (0.41-1.00 m s⁻²) and tractors (0.04-0.42 m s⁻²). Vibration magnitudes were largely consistent with those found in previous studies. The highest HAV magnitude was measured on a demolition hammer (13.3 m

Effect of Pre-Construction on Construction Schedule and Client Loyalty

OpenAIRE

Jong Hoon Kim; Hyun-Soo Lee; Moonseo Park; Min Jeong; Inbeom Lee

2016-01-01

Pre-construction is essential in achieving the success of a construction project. Due to the early involvement of project participants in the construction phase, project managers are able to plan ahead and solve issues well in advance leading to the success of the project and the satisfaction of the client. This research utilizes quantitative data derived from construction management projects in order to identify the relationship between pre-construction, construction schedule, and client sat...

The effect of intimate exposure to alcohol abuse on the acquisition of knowledge about drinking.

Science.gov (United States)

Rainer, J P

1994-01-01

This study explored how an alcohol education program might be structured to effectively educate college students about the consequences of alcohol use. The primary hypothesis tested stated that individuals would vary significantly in the amount of knowledge learned from a structured alcohol education workshop, based on the degree of familial or social exposure s/he has had to alcohol abuse. Social learning variables of locus of control, dogmatism, and expectancy for risk were tested for interaction with degree of exposure, to determine their influence on learning. A pretest-posttest control group was employed with a sample of 66 undergraduate college students. A four hour alcohol education program was administered to teach cognitive information and fact about alcohol, with a goal of facilitating responsible use/nonuse of alcohol. The Student Drinking Questionnaire measured acquisition of knowledge. The Adult Nowicki-Strickland Internal/External Scale measured locus of control, and Schultze's Short Dogmatism Scale measured dogmatism. The researcher developed an instrument for expectancy for risk. Multiple regression analyses yielded prediction equations for the variables under study. For the sample group, results demonstrated that a significant portion of the variance in the residualized posttest scores was accounted for by level of exposure and dogmatism. When the sample was blocked according to intimate or social exposure, dogmatism was the only construct entering the regression equation at a significant level for the intimate exposure group. None of the constructs were able to predict any of the residualized posttest scores for the social exposure group. It was concluded that: (1) Students in the sample learned differentially based on the degree of intimate exposure of alcohol; (2) Dogmatism is a moderating variable with acquisition of knowledge for those intimately exposed to alcohol abuse, but locus of control and expectancy for risk are not; and (3) Further

Sustainable Construction Risk Perceptions in the Kuwaiti Construction Industry

Directory of Open Access Journals (Sweden)

Dalya Ismael

2018-06-01

Full Text Available Sustainable construction is fundamentally different than traditional construction because it requires whole systems thinking, early collaboration across stakeholders, and core principles like reducing resource consumption, eliminating toxins, and applying life cycle costing. Construction professionals unfamiliar with this mindset and approach may perceive sustainable construction as risky. One of the global regions in need of more sustainable construction is the Middle Eastern and North African (MENA region. The MENA region is one of the fastest developing in the world. However, it is the slowest one in implementing sustainable construction practices. Kuwait, in particular, contributes 53% more carbon emissions per capita than the United States. To understand how the Kuwaiti construction industry perceives risks associated with more sustainable construction, a survey was developed with 52 risk elements in which 131 industry professionals responded. The results indicate that industry professionals perceive a lack of public awareness as the risk element with the highest probability of occurrence. The risk element with the highest possible negative impact on future projects is designers’ and contractors’ inexperience with sustainable construction. Other risks were found to include a high initial cost for materials and overall project costs. Educational interventions, changes in risk allocation, and behavioral science to reframe upfront costs as long-term savings are offered as possible solutions.

Noise-induced hearing loss in construction workers being assessed for hand-arm vibration syndrome.

Science.gov (United States)

House, Ronald A; Sauvé, John T; Jiang, Depeng

2010-01-01

Construction workers are at risk of noise-induced hearing loss (NIHL) but often have no periodic audiometric testing. The participants were construction workers assessed for Hand-Arm Vibration Syndrome (HAVS) at the Occupational Health Clinic, St. Michael's Hospital, Toronto, Ontario. Audiometry was offered and 169 of the 191 workers assessed for HAVS agreed to have the audiometric test. The objective was to examine the prevalence of hearing loss in these 169 workers and to determine the effect on hearing of duration of work in construction (as a proxy for noise exposure) and the severity of vibration white finger (VWF) which previous studies have suggested is a marker for increased individual susceptibility for NIHL. VWF was measured by the Stockholm vascular scale. All participants were men, median age of 57 (range: 28-75), median number of years worked in construction of 35 (range: 4-52). All of the Spearman rank correlations between years worked in construction and the hearing levels at each audiometric frequency were statistically significant (p hearing loss at or above the level at which a workers' compensation pension would be granted in Ontario and the prevalence of this auditory outcome had a statistically significant increase as years worked in construction increased. Multivariate linear regression indicated that VWF also had a statistically significant effect on hearing loss for all audiometric frequencies combined after controlling for years worked in construction. Improved prevention of hearing loss in construction workers is needed.

Construction of a catalog of X-ray spectra for mammography simulations

International Nuclear Information System (INIS)

Santos, L.C.S.; Vieira, J.W.

2017-01-01

Computational Exposure Models (MCEs) allow the simulation of the interaction of radiation with matter by means of Monte Carlo (MC) techniques. Generally, MCEs are composed of phantom, simulator algorithms of radioactive sources and an MC code to simulate the transport, interaction of the radiation with matter and to evaluate the energy deposited in regions of interest. To compose an MCE for simulations in mammography, the construction of a catalog of X-ray spectra was started, based on the catalog model constructed and using until then in MCEs by the Group of Research in Numerical Dosimetry and by the Group of Research in Computational Dosimetry & Embedded Systems (both referenced in this work as GDN). Potential of 25 kV and 35 kV and used target / filter were applied to the tube: Mo / Mo. The file containing the spectra was read correctly by EGSnrc

Community response to construction noise in three central cities of Zhejiang province, China.

Science.gov (United States)

Liu, Yong; Xia, Bo; Cui, Caiyun; Skitmore, Martin

2017-11-01

As a common source of environmental noise in China and many developing countries worldwide, construction work provokes many complaints and deterioration in acoustic climate quality. This paper describes research to obtain an improved understanding of people's community response to, and evaluation of, construction noise in three central cities of Zhejiang province, China. This involved carrying out a social survey using standard questionnaires developed by the International Commission on Biological Effects of Noise (ICBEN). A dose-response relationship model is established using a quadratic polynomial regression analysis based on construction noise exposure measurements from 40 construction sites in Hangzhou, Ningbo and Wenzhou. The results of the study indicate that the majority of people have a negative attitude to construction noise; the noise ranges between 60 dB and 80 dB (compared with 50 dB-70 dB traffic noise in Tianjin), with the percentage of highly annoyed people affected increasing from 15%-20% to 30%-40% over the range. There also different levels of annoyance depending on the time of day, and the location and activities of those affected. Other cultural differences are also apparent both between Ningbo/Wenzhou and the more urbane citizens of Hangzhou, and the Chinese people and their more noise-tolerant EU and Vietnam counterparts. The findings of this study provide a new perspective for the study of construction noise that can help local governments have an improved understanding of how residents react to construction noise for the purpose of selecting construction noise-mitigation projects and introducing construction noise-control regulations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Safety in numbers 4: The relationship between exposure to authentic and didactic environments and nursing students' learning of medication dosage calculation problem solving knowledge and skills.

Science.gov (United States)

Weeks, Keith W; Clochesy, John M; Hutton, B Meriel; Moseley, Laurie

2013-03-01

Advancing the art and science of education practice requires a robust evaluation of the relationship between students' exposure to learning and assessment environments and the development of their cognitive competence (knowing that and why) and functional competence (know-how and skills). Healthcare education translation research requires specific education technology assessments and evaluations that consist of quantitative analyses of empirical data and qualitative evaluations of the lived student experience of the education journey and schemata construction (Weeks et al., 2013a). This paper focuses on the outcomes of UK PhD and USA post-doctorate experimental research. We evaluated the relationship between exposure to traditional didactic methods of education, prototypes of an authentic medication dosage calculation problem-solving (MDC-PS) environment and nursing students' construction of conceptual and calculation competence in medication dosage calculation problem-solving skills. Empirical outcomes from both UK and USA programmes of research identified highly significant differences in the construction of conceptual and calculation competence in MDC-PS following exposure to the authentic learning environment to that following exposure to traditional didactic transmission methods of education (p students exposure to authentic learning environments is an essential first step in the development of conceptual and calculation competence and relevant schemata construction (internal representations of the relationship between the features of authentic dosage problems and calculation functions); and how authentic environments more ably support all cognitive (learning) styles in mathematics than traditional didactic methods of education. Functional competence evaluations are addressed in Macdonald et al. (2013) and Weeks et al. (2013e). Copyright © 2012. Published by Elsevier Ltd.

Construction Managers’ Perception of the Factors Affecting Sustainability in Construction Projects

OpenAIRE

Reza Taheriattar; Morvarid Farzanehrafat

2014-01-01

Sustainable construction is a comprehensive concept which requires long-term planning. Moreover, construction managers play a key role in leading, planning and scheduling of a construction project. As a result, sustainability of construction projects can be affected by construction managers’ decisions. In addition, for greater development of sustainable construction, affecting factors should firstly be notified. Therefore, it seems necessary to investigate construction managers’ perception of...

An approach to improve the match-on-card fingerprint authentication system security

CSIR Research Space (South Africa)

Nair, Kishor Krishnan

2016-07-01

Full Text Available -on-Card (TOC), Match-on- Card (MOC), Work-Sharing On-Card (WSOC), and System-on-Card (SOC). Out of these four approaches, the SOC is considered as the most secure and expensive, whereas the TOC is considered as the least secure and least expensive. The MOC...

An Approach to Improve the Match-on-Card ngerprint Authentication System Security

CSIR Research Space (South Africa)

Nair, Kishor Krishnan

2016-08-18

Full Text Available -on-Card (TOC), Match-on-Card (MOC), Work-Sharing On-Card (WSOC), and System-on-Card (SOC). Out of these four approaches, the SOC is considered as the most secure and expensive, whereas the TOC is considered as the least secure and least expensive. The MOC...

Agent Orange exposure and prevalence of self-reported diseases in Korean Vietnam veterans.

Science.gov (United States)

Yi, Sang-Wook; Ohrr, Heechoul; Hong, Jae-Seok; Yi, Jee-Jeon

2013-09-01

The aim of this study was to evaluate the association between Agent Orange exposure and self-reported diseases in Korean Vietnam veterans. A postal survey of 114 562 Vietnam veterans was conducted. The perceived exposure to Agent Orange was assessed by a 6-item questionnaire. Two proximity-based Agent Orange exposure indices were constructed using division/brigade-level and battalion/company-level unit information. Adjusted odds ratios (ORs) for age and other confounders were calculated using a logistic regression model. The prevalence of all self-reported diseases showed monotonically increasing trends as the levels of perceived self-reported exposure increased. The ORs for colon cancer (OR, 1.13), leukemia (OR, 1.56), hypertension (OR, 1.03), peripheral vasculopathy (OR, 1.07), enterocolitis (OR, 1.07), peripheral neuropathy (OR, 1.07), multiple nerve palsy (OR, 1.14), multiple sclerosis (OR, 1.24), skin diseases (OR, 1.05), psychotic diseases (OR, 1.07) and lipidemia (OR, 1.05) were significantly elevated for the high exposure group in the division/brigade-level proximity-based exposure analysis, compared to the low exposure group. The ORs for cerebral infarction (OR, 1.08), chronic bronchitis (OR, 1.05), multiple nerve palsy (OR, 1.07), multiple sclerosis (OR, 1.16), skin diseases (OR, 1.05), and lipidemia (OR, 1.05) were significantly elevated for the high exposure group in the battalion/company-level analysis. Korean Vietnam veterans with high exposure to Agent Orange experienced a higher prevalence of several self-reported chronic diseases compared to those with low exposure by proximity-based exposure assessment. The strong positive associations between perceived self-reported exposure and all self-reported diseases should be evaluated with discretion because the likelihood of reporting diseases was directly related to the perceived intensity of Agent Orange exposure.

Managing risks during the construction of a power generation facility

International Nuclear Information System (INIS)

Loulakis, M.C.

1992-01-01

The construction of a power generation facility is a substantial undertaking that involves considerable risks to all parties involved. While contractors are accustomed to dealing with risks, construction owners are typically more naive about not only the risks they are assuming in the construction of a project, but also about the role they play on the project itself. Owners and developers of power facilities must understand at the outset that their role during the construction of a project is as integral to the success of the project as that of the designer and contractor. In addition, owners should also understand that there are virtually no risks on a construction project that cannot be shifted among the contracting parties as part of the business deal. Consequently, an owner may contractually be assuming the risks of (1) unusually severe weather, (2) unexpected subsurface conditions, (3) strikes at the turbine supplier's plant or (4) changes in law - as well as the increases in price and delays to project completion associated with such risks. In light of this, a prudent owner will evaluate more than just whether there is sufficient financing to complete the construction of a contemplated project. Prudent owners will conduct a risk management review of the project structure and the contracting terms, with the primary focus being (1) the identification and analysis of the most significant risks faced, (2) a determination of how such risks can be either mitigated or eliminated, and (3) the assessment of the financial exposure to the owner should the potential risk become a reality. This paper will present the framework that owners and developers of power generation projects can use in undertaking such a risk management review

Randon daughter exposure of the U.K. population

International Nuclear Information System (INIS)

Cliff, K.D.

1980-01-01

The highest dose to the body tissues from natural radioactivity is that to the bronchial epithelium arising predominantly from the short-lived daughters of 222 Rn with a lesser contribution from the daughters of 220 Rn. This paper discusses the estimation of current United Kingdom population exposure to these nuclides. At present the exposure for an average member of the population of the UK is 0.15 WLM y -1 when the winter ventilation rate is 0.8 h -1 . This will increase to 0.58 WLM y -1 if the winter ventilation rate is reduced to 0.2 h -1 . The use of electrostatic precipitators would decrease the measured WL but would not affect the unattached fraction of 222 Rn daughter products, which determines the dose to the epithelium. Other methods of reducing 222 Rn daughter concentrations under investigation include prevention of the ingress of 222 Rn from the subsoil and the coating of construction materials with a radon barrier

Decrease Risk Behavior HIV Infected on Construction Laborers with Behavior Change Communication (BCC Approach

Directory of Open Access Journals (Sweden)

Purwaningsih Purwaningsih

2016-09-01

The purpose of this study was to determine the effectiveness of BCC approach to the reduction of contracting HIV risk behavior in the construction laborers. Method: This study used operational research design. In this study measures the effectiveness of behavior change of construction workers on the prevention of HIV transmission by comparing the behavior of the construction workers before and after the intervention. The subjects of this study were 150 people risk group of construction workers who work and are spread throughout the city of Surabaya. This research was carried out into three phases, namely, phase preintervention research, intervention research, and post-intervention phase of the study. Implemented in the first year and second year praintervensi stage implemented intervention and post-intervention phases. Result: The results of this study showed that 72% of construction workers is productive (18–35 years and visit his family more than once a month (38%. There is 20% of construction workers had sex with commercial sex workers and no one was using drugs. By 50% of construction workers never get information about HIV/AIDS and as many as 48% never use the services of HIV/AIDS. Discussion: External motivation construction workers associated with the utilization of behavioral HIV/AIDS services with sufficient correlation. Strong external motivation is influenced by risk behaviors of HIV/AIDS were conducted and the desire to get help. Weak external motivation is influenced by a lack of exposure to information related to HIV/AIDS services. The results of the FGD stakeholders have the perception is the same if a construction worker is a high risk group of contracting HIV. Most of the construction workers not have enough knowledge for the prevention of HIV transmission because they do not have access to HIV care and behavior are at risk of contracting HIV by construction workers. Keywords: construction workers, behavior change communication, behavior

Reducing health risks from indoor exposures in rapidly developing urban China.

Science.gov (United States)

Zhang, Yinping; Mo, Jinhan; Weschler, Charles J

2013-07-01

Over the past two decades there has been a large migration of China's population from rural to urban regions. At the same time, residences in cities have changed in character from single-story or low-rise buildings to high-rise structures constructed and furnished with many synthetic materials. As a consequence, indoor exposures (to pollutants with outdoor and indoor sources) have changed significantly. We briefly discuss the inferred impact that urbanization and modernization have had on indoor exposures and public health in China. We argue that growing adverse health costs associated with these changes are not inevitable, and we present steps that could be taken to reduce indoor exposures to harmful pollutants. As documented by China's Ministry of Health, there have been significant increases in morbidity and mortality among urban residents over the past 20 years. Evidence suggests that the population's exposure to air pollutants has contributed to increases in lung cancer, cardiovascular disease, pulmonary disease, and birth defects. Whether a pollutant has an outdoor or an indoor source, most exposure to the pollutant occurs indoors. Going forward, indoor exposures can be reduced by limiting the ingress of outdoor pollutants (while providing adequate ventilation with clean air), minimizing indoor sources of pollutants, updating government policies related to indoor pollution, and addressing indoor air quality during a building's initial design. Taking the suggested steps could lead to significant reductions in morbidity and mortality, greatly reducing the societal costs associated with pollutant derived ill health.

Protective Effect of Different Anti-Rabies Virus VHH Constructs against Rabies Disease in Mice

Science.gov (United States)

Terryn, Sanne; Francart, Aurélie; Lamoral, Sophie; Hultberg, Anna; Rommelaere, Heidi; Wittelsberger, Angela; Callewaert, Filip; Stohr, Thomas; Meerschaert, Kris; Ottevaere, Ingrid; Stortelers, Catelijne; Vanlandschoot, Peter; Kalai, Michael; Van Gucht, Steven

2014-01-01

Rabies virus causes lethal brain infection in about 61000 people per year. Each year, tens of thousands of people receive anti-rabies prophylaxis with plasma-derived immunoglobulins and vaccine soon after exposure. Anti-rabies immunoglobulins are however expensive and have limited availability. VHH are the smallest antigen-binding functional fragments of camelid heavy chain antibodies, also called Nanobodies. The therapeutic potential of anti-rabies VHH was examined in a mouse model using intranasal challenge with a lethal dose of rabies virus. Anti-rabies VHH were administered directly into the brain or systemically, by intraperitoneal injection, 24 hours after virus challenge. Anti-rabies VHH were able to significantly prolong survival or even completely rescue mice from disease. The therapeutic effect depended on the dose, affinity and brain and plasma half-life of the VHH construct. Increasing the affinity by combining two VHH with a glycine-serine linker into bivalent or biparatopic constructs, increased the neutralizing potency to the picomolar range. Upon direct intracerebral administration, a dose as low as 33 µg of the biparatopic Rab-E8/H7 was still able to establish an anti-rabies effect. The effect of systemic treatment was significantly improved by increasing the half-life of Rab-E8/H7 through linkage with a third VHH targeted against albumin. Intraperitoneal treatment with 1.5 mg (2505 IU, 1 ml) of anti-albumin Rab-E8/H7 prolonged the median survival time from 9 to 15 days and completely rescued 43% of mice. For comparison, intraperitoneal treatment with the highest available dose of human anti-rabies immunoglobulins (65 mg, 111 IU, 1 ml) only prolonged survival by 2 days, without rescue. Overall, the therapeutic benefit seemed well correlated with the time of brain exposure and the plasma half-life of the used VHH construct. These results, together with the ease-of-production and superior thermal stability, render anti-rabies VHH into valuable

Polygons on Crater Floor

Science.gov (United States)

2003-01-01

MGS MOC Release No. MOC2-357, 11 May 2003This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) picture shows a pattern of polygons on the floor of a northern plains impact crater. These landforms are common on crater floors at high latitudes on Mars. Similar polygons occur in the arctic and antarctic regions of Earth, where they indicate the presence and freeze-thaw cycling of ground ice. Whether the polygons on Mars also indicate water ice in the ground is uncertain. The image is located in a crater at 64.8oN, 292.7oW. Sunlight illuminates the scene from the lower left.

Estimating the distribution of lifetime cumulative radon exposures for California residents: a brief summary

International Nuclear Information System (INIS)

Liu, K.-S.; Chang, Y.-L.; Hayward, S.B.; Gadgil, A.J.; Nero, A.V.

1992-01-01

Data on residential radon concentrations in California, together with information on California residents' moving houses and time-activity patterns, have been used to estimate the distribution of lifetime cumulative exposures to 222 Rn. This distribution was constructed using Monte Carlo techniques to simulate the lifetime occupancy histories and associated radon exposures of 10,000 California residents. For standard male and female lifespans, the simulation sampled from transition probability matrices representing changes of residence within and between six regions of California, as well as into and out of the other United States, and then sampled from the appropriate regional (or national) distribution of indoor concentrations. The resulting distribution of lifetime cumulative exposures has a significantly narrower relative width than the distribution of California indoor concentrations, with only a small fraction (less than 0.2%) of the population having lifetime exposures equivalent to living their lifetimes in a single home with a radon concentration of 148 Bq.m -3 or more. (author)

Principles for limiting exposure of the public to natural sources of radiation

International Nuclear Information System (INIS)

1984-01-01

In a preliminary note a discussion is presented of the factors by which the values of Annual Limits on Intakes (ALI) and Derived Air Concentrations (DAC) recommended in ICRP Publication 30 for workers would differ from those that would be appropriate for members of the public. In Publication 39, the principles adopted distinguish between procedures for existing exposure situations, which can only be influenced by remedial action, and examples of future exposure situations which can be subject to administrative control (e.g. new house construction, reduction of ventilation in existing houses, production of building materials from new production facilities, water supplies from new facilities, burning natural gas from new wells, using fertiliser from new mills and factories). (U.K.)

Construction labor productivity during nuclear power plant construction

International Nuclear Information System (INIS)

Murray, W.B.

1980-01-01

There is no single satisfactory way to measure productivity in the construction industry. The industry is too varied, too specialized and too dependent upon vast numbers of interrelations between trades, contractors, designers and owners. Hence, no universally reliable indices for measuring construction productivity has been developed. There are problems that are generic to all large union-built nuclear power plants. The actions of any one owner cannot rectify the shortcomings of the construction industry. The generic problems are being identified, and many national organizations are attempting to make the construction industry more productive by recommending various changes

Patient and personnel exposure during extracorporeal lithotripsy

International Nuclear Information System (INIS)

Glaze, S.; LeBlanc, A.D.; Bushong, S.C.; Griffith, D.P.

1987-01-01

Extracorporeal shock wave lithotripsy (ESWL) has provided a nonsurgical approach to treatment of renal stones. The Dornier lithotripter uses dual image intensified x-ray systems to center the stone before treatment. Three imaging modes are offered: a fluoroscopic mode and two video spot filming modes. The average entrance exposure to the stone side of the typical patient at our facility is 2.6 X 10(-3) C kg-1 (10 R) [range: 0.5-7.7 X 10(-3) C kg-1 (2-30 R)] which is comparable and often much less than that reported for percutaneous lithotripsy. Recommendations are made for minimizing patient exposure. Scattered radiation levels in the lithotripter room are presented. We have determined that Pb protective apparel is not required during this procedure provided x-ray operation is temporarily halted should personnel be required to lean directly over the tub to attend to the patient. If the walls of the ESWL room are greater than 1.83 m (6 feet) from the tub, shielding in addition to conventional construction is not required

Patient and personnel exposure during extracorporeal lithotripsy

Energy Technology Data Exchange (ETDEWEB)

Glaze, S.; LeBlanc, A.D.; Bushong, S.C.; Griffith, D.P.

1987-12-01

Extracorporeal shock wave lithotripsy (ESWL) has provided a nonsurgical approach to treatment of renal stones. The Dornier lithotripter uses dual image intensified x-ray systems to center the stone before treatment. Three imaging modes are offered: a fluoroscopic mode and two video spot filming modes. The average entrance exposure to the stone side of the typical patient at our facility is 2.6 X 10(-3) C kg-1 (10 R) (range: 0.5-7.7 X 10(-3) C kg-1 (2-30 R)) which is comparable and often much less than that reported for percutaneous lithotripsy. Recommendations are made for minimizing patient exposure. Scattered radiation levels in the lithotripter room are presented. We have determined that Pb protective apparel is not required during this procedure provided x-ray operation is temporarily halted should personnel be required to lean directly over the tub to attend to the patient. If the walls of the ESWL room are greater than 1.83 m (6 feet) from the tub, shielding in addition to conventional construction is not required.

Electrochemical construction

Science.gov (United States)

Einstein, Harry; Grimes, Patrick G.

1983-08-23

An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

Construction mathematics

CERN Document Server

Virdi, Surinder; Virdi, Narinder Kaur

2014-01-01

Construction Mathematics is an introductory level mathematics text, written specifically for students of construction and related disciplines. Learn by tackling exercises based on real-life construction maths. Examples include: costing calculations, labour costs, cost of materials and setting out of building components. Suitable for beginners and easy to follow throughout. Learn the essential basic theory along with the practical necessities. The second edition of this popular textbook is fully updated to match new curricula, and expanded to include even more learning exercises. End of chapter exercises cover a range of theoretical as well as practical problems commonly found in construction practice, and three detailed assignments based on practical tasks give students the opportunity to apply all the knowledge they have gained. Construction Mathematics addresses all the mathematical requirements of Level 2 construction NVQs from City & Guilds/CITB and Edexcel courses, including the BTEC First Diploma in...

Validating MEDIQUAL Constructs

Science.gov (United States)

Lee, Sang-Gun; Min, Jae H.

In this paper, we validate MEDIQUAL constructs through the different media users in help desk service. In previous research, only two end-users' constructs were used: assurance and responsiveness. In this paper, we extend MEDIQUAL constructs to include reliability, empathy, assurance, tangibles, and responsiveness, which are based on the SERVQUAL theory. The results suggest that: 1) five MEDIQUAL constructs are validated through the factor analysis. That is, importance of the constructs have relatively high correlations between measures of the same construct using different methods and low correlations between measures of the constructs that are expected to differ; and 2) five MEDIQUAL constructs are statistically significant on media users' satisfaction in help desk service by regression analysis.

Modern diaper performance: construction, materials, and safety review.

Science.gov (United States)

Dey, Swatee; Kenneally, Dianna; Odio, Mauricio; Hatzopoulos, Ioannis

2016-07-01

A review of the literature on diapers and diaper rash reveals that many clinicians are unfamiliar with modern diaper construction and materials as well as diaper safety testing methods. Typical modern diapers do not contain ingredients of concern such as latex and disperse dyes, but use ingredients such as spandex and pigments with a favorable safety profile. Today's disposable diaper is a high performance product whose carefully designed layers and liners provide optimal urine and feces absorption and an ever more clothing-like and comfortable fit. This is possible due to a variety of specialized polymer materials that provide optimal absorption of urine and feces, thereby minimizing skin exposure. © 2016 The International Society of Dermatology.

Medium wave exposure characterisation using exposure quotients.

Science.gov (United States)

Paniagua, Jesús M; Rufo, Montaña; Jiménez, Antonio; Antolín, Alicia; Pinar, Iván

2010-06-01

One of the aspects considered in the International Commission on Non-Ionizing Radiation Protection guidelines is that, in situations of simultaneous exposure to fields of different frequencies, exposure quotients for thermal and electrical stimulation effects should be examined. The aim of the present work was to analyse the electromagnetic radiation levels and exposure quotients for exposure to multiple-frequency sources in the vicinity of medium wave radio broadcasting antennas. The measurements were made with a spectrum analyser and a monopole antenna. Kriging interpolation was used to prepare contour maps and to estimate the levels in the towns and villages of the zone. The results showed that the exposure quotient criterion based on electrical stimulation effects to be more stringent than those based on thermal effects or power density levels. Improvement of dosimetry evaluations requires the spectral components of the radiation to be quantified, followed by application of the criteria for exposure to multiple-frequency sources.

Use of engineered nanomaterials in the construction industry with specific emphasis on paints and their flows in construction and demolition waste in Switzerland.

Science.gov (United States)

Hincapié, Ingrid; Caballero-Guzman, Alejandro; Hiltbrunner, David; Nowack, Bernd

2015-09-01

One sector where the use of engineered nanomaterials (ENMs) is supposed to offer novel or improved functionalities is the construction industry. During the renovation or demolition of buildings, ENMs contained in former construction materials will enter recycling systems or become construction waste. Currently, information about ENM flows in these processes is insufficient. The potential for the release of ENMs from this waste into the environment is unknown, as are the environmental impacts. To evaluate whether there is currently any nano-relevant construction and demolition waste (C&DW) originating from buildings, we evaluated the sources and flows of ENMs in C&DW and identified their potential exposure pathways. A survey of business representatives of Swiss companies in this sector found that ENMs are mainly used in paints and cement. The most frequently used ENMs in the Swiss housing construction industry are nano-TiO2, nano-SiO2, nano-ZnO, and nano-Ag. Using a bottom-up, semi-quantitative approach, we estimated the flows of ENMs contained in paints along the product's life cycle from buildings to recycling and landfill. The flows of ENMs are determined by their associated flows of building materials. We estimated an annual amount of ENMs used in paints of 14t of TiO2, 12t of SiO2, 5t of ZnO, and 0.2t of Ag. The majority of ENMs contained in paints in Switzerland enter recycling systems (23t/y), a smaller amount is disposed directly in landfills (7t/y), and a tiny fraction of ENM waste is incinerated (0.01t/y). Our results allow a qualitative determination of the potential release of ENMs into technical or environmental compartments, with the highest potential release expected during recycling. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dust exposure and the risk of cancer in cement industry workers in Korea.

Science.gov (United States)

Koh, Dong-Hee; Kim, Tae-Woo; Jang, Seunghee; Ryu, Hyang-Woo

2013-03-01

Cement is used widely in the construction industry, though it contains hazardous chemicals such as hexavalent chromium. Several epidemiological studies have examined the association between cement dust exposure and cancer, but these associations have proved inconclusive. In the present study, we examined the association between dust exposure and cancer in cement industry workers in Korea. Our cohort consisted of 1,324 men who worked at two Portland cement manufacturing factories between 1997 and 2005. We calculated cumulative dust exposures, then categorized workers into high and low dust exposure groups. Cancer cases were identified between 1997 and 2005 by linking with the national cancer registry. Standardized incidence ratios (SIRs) were calculated for all workers and the high and low dust exposure groups, respectively. The SIR for overall cancers in all workers was increased (1.35, 95% CI: 1.01-1.78). The SIR for stomach cancer in the high dust exposure group was increased (2.18, 95% CI: 1.19-3.65), but there was no increased stomach cancer risk in the low dust exposure group. The SIR for rectal cancer in all workers was increased (3.05, 95% CI: 1.32-6.02). Rectal cancer risk was similar in the high and low exposure groups. Our findings suggest a potential association between exposure in the cement industry and an increased risk of stomach and rectal cancers. However, due to the small number of cases, this association should be further investigated in a study with a longer follow-up period and adjustment for confounders. Copyright © 2012 Wiley Periodicals, Inc.

Cancer immunogenomic approach to neoantigen discovery in a checkpoint blockade responsive murine model of oral cavity squamous cell carcinoma

Science.gov (United States)

Zolkind, Paul; Przybylski, Dariusz; Marjanovic, Nemanja; Nguyen, Lan; Lin, Tianxiang; Johanns, Tanner; Alexandrov, Anton; Zhou, Liye; Allen, Clint T.; Miceli, Alexander P.; Schreiber, Robert D.; Artyomov, Maxim; Dunn, Gavin P.; Uppaluri, Ravindra

2018-01-01

Head and neck squamous cell carcinomas (HNSCC) are an ideal immunotherapy target due to their high mutation burden and frequent infiltration with lymphocytes. Preclinical models to investigate targeted and combination therapies as well as defining biomarkers to guide treatment represent an important need in the field. Immunogenomics approaches have illuminated the role of mutation-derived tumor neoantigens as potential biomarkers of response to checkpoint blockade as well as representing therapeutic vaccines. Here, we aimed to define a platform for checkpoint and other immunotherapy studies using syngeneic HNSCC cell line models (MOC2 and MOC22), and evaluated the association between mutation burden, predicted neoantigen landscape, infiltrating T cell populations and responsiveness of tumors to anti-PD1 therapy. We defined dramatic hematopoietic cell transcriptomic alterations in the MOC22 anti-PD1 responsive model in both tumor and draining lymph nodes. Using a cancer immunogenomics pipeline and validation with ELISPOT and tetramer analysis, we identified the H-2Kb-restricted ICAM1P315L (mICAM1) as a neoantigen in MOC22. Finally, we demonstrated that mICAM1 vaccination was able to protect against MOC22 tumor development defining mICAM1 as a bona fide neoantigen. Together these data define a pre-clinical HNSCC model system that provides a foundation for future investigations into combination and novel therapeutics. PMID:29423108

Age-related synaptic loss of the medial olivocochlear efferent innervation

Directory of Open Access Journals (Sweden)

Schrader Angela

2010-11-01

Full Text Available Abstract Age-related functional decline of the nervous system is consistently observed, though cellular and molecular events responsible for this decline remain largely unknown. One of the most prevalent age-related functional declines is age-related hearing loss (presbycusis, a major cause of which is the loss of outer hair cells (OHCs and spiral ganglion neurons. Previous studies have also identified an age-related functional decline in the medial olivocochlear (MOC efferent system prior to age-related loss of OHCs. The present study evaluated the hypothesis that this functional decline of the MOC efferent system is due to age-related synaptic loss of the efferent innervation of the OHCs. To this end, we used a recently-identified transgenic mouse line in which the expression of yellow fluorescent protein (YFP, under the control of neuron-specific elements from the thy1 gene, permits the visualization of the synaptic connections between MOC efferent fibers and OHCs. In this model, there was a dramatic synaptic loss between the MOC efferent fibers and the OHCs in older mice. However, age-related loss of efferent synapses was independent of OHC status. These data demonstrate for the first time that age-related loss of efferent synapses may contribute to the functional decline of the MOC efferent system and that this synaptic loss is not necessary for age-related loss of OHCs.

Assessing the sustainable construction of large construction companies in Malaysia

Science.gov (United States)

Adewale, Bamgbade Jibril; Mohammed, Kamaruddeen Ahmed; Nasrun, Mohd Nawi Mohd

2016-08-01

Considering the increasing concerns for the consideration of sustainability issues in construction project delivery within the construction industry, this paper assesses the extent of sustainable construction among Malaysian large contractors, in order to ascertain the level of the industry's impacts on both the environment and the society. Sustainable construction explains the construction industry's responsibility to efficiently utilise the finite resources while also reducing construction impacts on both humans and the environment throughout the phases of construction. This study used proportionate stratified random sampling to conduct a field study with a sample of 172 contractors out of the 708 administered questionnaires. Data were collected from large contractors in the eleven states of peninsular Malaysia. Using the five-level rating scale (which include: 1= Very Low; 2= Low; 3= Moderate; 4= High; 5= Very High) to describe the level of sustainable construction of Malaysian contractors based on previous studies, statistical analysis reveals that environmental, social and economic sustainability of Malaysian large contractors are high.

Study on construction method of concrete in the underground research laboratory. 4

International Nuclear Information System (INIS)

Iriya, Keishiro; Tajima, Takatoshi; Noda, Masaru

2004-02-01

Low alkaline cement is planned to use in construction of Horonobe Underground Research Center as one of in situ experiments. These experiments will be carried out in a part of the vertical shafts and horizontal excavated tunnels. The problems in actual using should be solved and improved until starting construction. This study has been carried out in order to improve the HFSC taking the Horonobe environment into account. Model analysis and preliminary laboratory experiment on hyper alkaline alteration of bentonite and rock have been carried out. And a long term permeability experiment on procedure. (author)or the superfluous exposure dose prevention in IVRbased on results of pH measuring for 546 days and geo-chemical code. Open data and undefined reaction were pointed out in order to accomplish the model on low alkalinity cement with high pozollan content. The effects on fresh concrete properties and harden concrete due to changing properties of fly ash were investigated. Experimental basic planning in situ test of low alkaline cement in Horonobe are proposed. And finally, procedure of improvement HFSC in Horonobe construction are investigated and proposed. It is concluded that HFSC can be applied for construction work of Horonobe underground research center. (author)

Seeing Green: Mere Exposure to Money Triggers a Business Decision Frame and Unethical Outcomes

Science.gov (United States)

Kouchaki, Maryam; Smith-Crowe, Kristin; Brief, Arthur P.; Sousa, Carlos

2013-01-01

Can mere exposure to money corrupt? In four studies, we examined the likelihood of unethical outcomes when the construct of money was activated through the use of priming techniques. The results of Study 1 demonstrated that individuals primed with money were more likely to demonstrate unethical intentions than those in the control group. In Study…

Mortality from non‐malignant respiratory diseases among people with silicosis in Hong Kong: exposure–response analyses for exposure to silica dust

Science.gov (United States)

Tse, L A; Yu, I T S; Leung, C C; Tam, W; Wong, T W

2007-01-01

Objectives To examine the exposure–response relationships between various indices of exposure to silica dust and the mortality from non‐malignant respiratory diseases (NMRDs) or chronic obstructive pulmonary diseases (COPDs) among a cohort of workers with silicosis in Hong Kong. Methods The concentrations of respirable silica dust were assigned to each industry and job task according to historical industrial hygiene measurements documented previously in Hong Kong. Exposure indices included cumulative dust exposure (CDE) and mean dust concentration (MDC). Penalised smoothing spline models were used as a preliminary step to detect outliers and guide further analyses. Multiple Cox's proportional hazard models were used to estimate the dust effects on the risk of mortality from NMRDs or COPDs after truncating the highest exposures. Results 371 of the 853 (43.49%) deaths occurring among 2789 workers with silicosis during 1981–99 were from NMRDs, and 101 (27.22%) NMRDs were COPDs. Multiple Cox's proportional hazard models showed that CDE (p = 0.009) and MDC (pcaisson workers and among those ever employed in other occupations with high exposure to silica dust. No exposure–response relationship was observed for surface construction workers with low exposures. A clear upward trend for both NMRDs and COPDs mortality was found with increasing severity of radiological silicosis. Conclusion This study documented an exposure–response relationship between exposure to silica dust and the risk of death from NMRDs or COPDs among workers with silicosis, except for surface construction workers with low exposures. The risk of mortality from NMRDs increased significantly with the progression of International Labor Organization categories, independent of dust effects. PMID:16973737

Causes of Construction Delays in Qatar Construction Projects

OpenAIRE

Murat Gunduz; Mohanad H. A. AbuHassan

2016-01-01

Construction industry mainly focuses on the superstructure, infrastructure, and oil and gas industry. The development of infrastructure projects in developing countries attracted a lot of foreign construction contractors, consultants, suppliers and diversified workforce to interfere and to be evolved in such huge investment. Reducing worksite delays in such projects require knowledge and attention. Therefore, it is important to identify the influencing delay attributes affecting construction ...

Design of exposure systems for ELF electric field bioeffects research

International Nuclear Information System (INIS)

Kaune, W.T.; Decker, J.R.; Phillips, R.D.; Gillis, M.F.

1978-01-01

Two systems for exposure and sham-exposure of large numbers of rats and mice to uniform, vertical, 60-Hz electric fields have been constructed. The rat system contains four racks of four rectangular 1.0m x 2.2m exposure-electrodes that are stacked vertically with a separation between adjacent electrodes of 0.41 m. Any two of the four exposure racks may be energized to a maximum field strength of 150 kV/m. Each exposure electrode is equipped with 24 Lexan cages, each of which holds a single rat. The cage floor is a stainless steel screen that serves as one electrode. The system for watering animals is contained entirely within the electrode and does not protrude above the cage's floor, thereby preventing distortion of the exposure field and electrical shock or discharge as the animal drinks. The total capacity of the system is 288 rats. A similar system of two racks of five electrodes each is used to expose as many as 450 mice to fields at a maximum strength of 150 kV/m while sham exposing an equal number. Measurements of the electric field reveal an overall uniformity within 4% over the area to be occupied by experimental animals. The field inside a Lexan cage is reduced by about 3%. No corona-discharge has been detected. Measurements of ozone concentration in the rat and mouse exposure systems show no difference from background levels. Harmonic distortion has been eliminated by damping and filtering the high-voltage supply. Animals housed in close proximity are partially shielded from the electric field; the total body current in a rat model is reduced by 35 ± 5% when rats are placed in adjacent cages. (author)

Construction completion report

International Nuclear Information System (INIS)

1990-01-01

This Construction Completion Report documents the major construction projects at the Waste Isolation Pilot Plant (WIPP) site and related information on contracts, schedules, and other areas which affected construction. This report is not intended to be an exhaustive detailed analysis of construction, but is a general overview and summary of the WIPP construction. 10 refs., 29 figs

Neurotoxic exposures and effects: gender and sex matter! Hänninen Lecture 2011.

Science.gov (United States)

Mergler, Donna

2012-08-01

Although males and females differ both biologically and in their social and power relations throughout their life span, research in environmental and occupational neurotoxicology often ignore sex and/or gender as a characteristic that requires in-depth consideration. The neurotoxicology literature continues to confuse the terms sex (biological attributes) and gender (socially constructed roles and behavior) and the words are still used interchangeably. Throughout the lifespan, sex and gender are in interaction and both may play a role in influencing exposure and effect. Studies that have examined both males and females, provide evidence for sex differences in toxicokinetics and responses to neurotoxic assault as well as gender differences in exposure patterns, biomarkers of exposure, neurobehavioral performance and social consequences. Integrating sex and gender considerations into research in neurotoxicology would not only provide us with a better understanding of the mechanisms and pathways that lead to toxic assault, but also provide a means to improve preventive intervention strategies. Copyright © 2012 Elsevier Inc. All rights reserved.

Environmental exposure to manganese and motor function of children in Mexico.

Science.gov (United States)

Hernández-Bonilla, D; Schilmann, A; Montes, S; Rodríguez-Agudelo, Y; Rodríguez-Dozal, S; Solís-Vivanco, R; Ríos, C; Riojas-Rodríguez, H

2011-10-01

Occupational manganese (Mn) exposure has been associated with motor deficits in adult workers, but data on the potential effects of environmental exposure to Mn on the developing motor function for a children population is scarce. The aim of this study was to evaluate the association between exposure to Mn and motor function of school aged children. We conducted a cross-sectional study selecting 195 children (100 exposed and 95 unexposed) between 7 and 11 years old. The following tests were used to evaluate the motor function: Grooved pegboard, finger tapping, and Santa Ana test. Mn exposure was assessed by blood (MnB) and hair concentrations (MnH). We constructed linear regression models to evaluate the association between exposure to Mn and the different test scores adjusting for age, sex, maternal education, hemoglobin and blood lead. The median concentration of MnH and MnB was significantly higher in exposed (12.6 μg/g and 9.5 μg/L) compared to unexposed children (0.6 μg/g and 8.0 μg/L). The exposed children on average performed the grooved pegboard test faster, but made more errors, although these results did not reach statistical significance with neither one of the Mn exposure biomarkers. MnB showed an inverse association on the execution of the finger tapping test (average in 5 trials β -0.4, p=0.02), but no association was observed with MnH. A subtle negative association of Mn exposure on motor speed and coordination was shown. In adults, the main effect of environmental Mn exposure has been associated with motor skills, but these results suggest that such alterations are not the main effect on children. Copyright © 2011 Elsevier Inc. All rights reserved.

Collisional mechanisms in D- beam sources for MFE experiments and reactors. Progress report No. 16 for quarter ending December 31, 1983

International Nuclear Information System (INIS)

Coggiola, M.J.; Peterson, J.R.

1984-01-01

We have begun a systematic study of H - /D - ion production from low-work function metal surfaces. Initial experiments are focussing on low energy (50 to 500 ev) H/sub i/ + /D/sub i/ + (i=1-3) impact on both clean polycrystalline Mo and minimum work-function Mo/Cs surfaces. A new, ultra-high vacuum ion-surface scattering apparatus has been constructed for this work, and is described here. Preliminary results are presented for the measured secondary electron yields from low energy He + , Ar + , H + , H 2 + , H 3 + , and Cs + impact on polycrystalline molybdenum between 50 eV and 1500 eV

'Inca City' is Part of a Circular Feature

Science.gov (United States)

2002-01-01

MGS MOC Release No. MOC2-319, 8 August 2002 [figure removed for brevity, see original site] 'Inca City' is the informal name given by Mariner 9 scientists in 1972 to a set of intersecting, rectilinear ridges that are located among the layered materials of the south polar region of Mars. Their origin has never been understood; most investigators thought they might be sand dunes, either modern dunes or, more likely, dunes that were buried, hardened, then exhumed. Others considered them to be dikes formed by injection of molten rock (magma) or soft sediment into subsurface cracks that subsequently hardened and then were exposed at the surface by wind erosion. The Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) has provided new information about the 'Inca City' ridges, though the camera's images still do not solve the mystery. The new information comes in the form of a MOC red wide angle context frame taken in mid-southern spring, shown above left and above right. The original Mariner 9 view of the ridges is seen at the center. The MOC image shows that the 'Inca City' ridges, located at 82oS, 67oW, are part of a larger circular structure that is about 86 km (53 mi) across. It is possible that this pattern reflects an origin related to an ancient, eroded meteor impact crater that was filled-in, buried, then partially exhumed. In this case, the ridges might be the remains of filled-in fractures in the bedrock into which the crater formed, or filled-in cracks within the material that filled the crater. Or both explanations could be wrong. While the new MOC image shows that 'Inca City' has a larger context as part of a circular form, it does not reveal the exact origin of these striking and unusual martian landforms.

Familial hypercholesterolaemia: a model of care for Australasia.

Science.gov (United States)

Watts, Gerald F; Sullivan, David R; Poplawski, Nicola; van Bockxmeer, Frank; Hamilton-Craig, Ian; Clifton, Peter M; O'Brien, Richard; Bishop, Warrick; George, Peter; Barter, Phillip J; Bates, Timothy; Burnett, John R; Coakley, John; Davidson, Patricia; Emery, Jon; Martin, Andrew; Farid, Waleed; Freeman, Lucinda; Geelhoed, Elizabeth; Juniper, Amanda; Kidd, Alexa; Kostner, Karam; Krass, Ines; Livingston, Michael; Maxwell, Suzy; O'Leary, Peter; Owaimrin, Amal; Redgrave, Trevor G; Reid, Nicola; Southwell, Lynda; Suthers, Graeme; Tonkin, Andrew; Towler, Simon; Trent, Ronald

2011-10-01

Familial hypercholesterolaemia (FH) is a dominantly inherited disorder present from birth that causes marked elevation in plasma cholesterol and premature coronary heart disease. There are at least 45,000 people with FH in Australia and New Zealand, but the vast majority remains undetected and those diagnosed with the condition are inadequately treated. To bridge this major gap in coronary prevention the FH Australasia Network (Australian Atherosclerosis Society) has developed a consensus model of care (MoC) for FH. The MoC is based on clinical experience, expert opinion, published evidence and consultations with a wide spectrum of stakeholders, and has been developed for use primarily by specialist centres intending starting a clinical service for FH. This MoC aims to provide a standardised, high-quality and cost-effective system of care that is likely to have the highest impact on patient outcomes. The MoC for FH is presented as a series of recommendations and algorithms focusing on the standards required for the detection, diagnosis, assessment and management of FH in adults and children. The process involved in cascade screening and risk notification, the backbone for detecting new cases of FH, is detailed. Guidance on treatment is based on risk stratifying patients, management of non-cholesterol risk factors, safe and effective use of statins, and a rational approach to follow-up of patients. Clinical and laboratory recommendations are given for genetic testing. An integrative system for providing best clinical care is described. This MoC for FH is not prescriptive and needs to be complemented by good clinical judgment and adjusted for local needs and resources. After initial implementation, the MoC will require critical evaluation, development and appropriate modification. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Stronger efferent suppression of cochlear neural potentials by contralateral acoustic stimulation in awake than in anesthetized chinchilla

Directory of Open Access Journals (Sweden)

Cristian eAedo

2015-03-01

Full Text Available There are two types of sensory cells in the mammalian cochlea, inner hair cells, which make synaptic contact with auditory-nerve afferent fibers, and outer hair cells that are innervated by crossed and uncrossed medial olivocochlear (MOC efferent fibers. Contralateral acoustic stimulation activates the uncrossed efferent MOC fibers reducing cochlear neural responses, thus modifying the input to the central auditory system. The chinchilla, among all studied mammals, displays the lowest percentage of uncrossed MOC fibers raising questions about the strength and frequency distribution of the contralateral-sound effect in this species. On the other hand, MOC effects on cochlear sensitivity have been mainly studied in anesthetized animals and since the MOC-neuron activity depends on the level of anesthesia, it is important to assess the influence of anesthesia in the strength of efferent effects. Seven adult chinchillas (Chinchilla laniger were chronically implanted with round-window electrodes in both cochleae. We compared the effect of contralateral sound in awake and anesthetized condition. Compound action potentials (CAP and cochlear microphonics (CM were measured in the ipsilateral cochlea in response to tones in absence and presence of contralateral sound. Control measurements performed after middle-ear muscles section in one animal discarded any possible middle-ear reflex activation. Contralateral sound produced CAP amplitude reductions in all chinchillas, with suppression effects greater by about 1-3 dB in awake than in anesthetized animals. In contrast, CM amplitude increases of up to 1.9 dB were found in only three awake chinchillas. In both conditions the strongest efferent effects were produced by contralateral tones at frequencies equal or close to those of ipsilateral tones. Contralateral CAP suppressions for 1-6 kHz ipsilateral tones corresponded to a span of uncrossed MOC fiber innervation reaching at least the central third of the

Stronger efferent suppression of cochlear neural potentials by contralateral acoustic stimulation in awake than in anesthetized chinchilla.

Science.gov (United States)

Aedo, Cristian; Tapia, Eduardo; Pavez, Elizabeth; Elgueda, Diego; Delano, Paul H; Robles, Luis

2015-01-01

There are two types of sensory cells in the mammalian cochlea, inner hair cells, which make synaptic contact with auditory-nerve afferent fibers, and outer hair cells that are innervated by crossed and uncrossed medial olivocochlear (MOC) efferent fibers. Contralateral acoustic stimulation activates the uncrossed efferent MOC fibers reducing cochlear neural responses, thus modifying the input to the central auditory system. The chinchilla, among all studied mammals, displays the lowest percentage of uncrossed MOC fibers raising questions about the strength and frequency distribution of the contralateral-sound effect in this species. On the other hand, MOC effects on cochlear sensitivity have been mainly studied in anesthetized animals and since the MOC-neuron activity depends on the level of anesthesia, it is important to assess the influence of anesthesia in the strength of efferent effects. Seven adult chinchillas (Chinchilla laniger) were chronically implanted with round-window electrodes in both cochleae. We compared the effect of contralateral sound in awake and anesthetized condition. Compound action potentials (CAP) and cochlear microphonics (CM) were measured in the ipsilateral cochlea in response to tones in absence and presence of contralateral sound. Control measurements performed after middle-ear muscles section in one animal discarded any possible middle-ear reflex activation. Contralateral sound produced CAP amplitude reductions in all chinchillas, with suppression effects greater by about 1-3 dB in awake than in anesthetized animals. In contrast, CM amplitude increases of up to 1.9 dB were found in only three awake chinchillas. In both conditions the strongest efferent effects were produced by contralateral tones at frequencies equal or close to those of ipsilateral tones. Contralateral CAP suppressions for 1-6 kHz ipsilateral tones corresponded to a span of uncrossed MOC fiber innervation reaching at least the central third of the chinchilla cochlea.

Occupational Exposure to Respirable Dust, Respirable Crystalline Silica and Diesel Engine Exhaust Emissions in the London Tunnelling Environment.

Science.gov (United States)

Galea, Karen S; Mair, Craig; Alexander, Carla; de Vocht, Frank; van Tongeren, Martie

2016-03-01

Personal 8-h shift exposure to respirable dust, diesel engine exhaust emissions (DEEE) (as respirable elemental carbon), and respirable crystalline silica of workers involved in constructing an underground metro railway tunnel was assessed. Black carbon (BC) concentrations were also assessed using a MicroAeth AE51. During sprayed concrete lining (SCL) activities in the tunnel, the geometric mean (GM) respirable dust exposure level was 0.91mg m(-3), with the highest exposure measured on a back-up sprayer (3.20mg m(-3)). The GM respirable crystalline silica concentration for SCL workers was 0.03mg m(-3), with the highest measurement also for the back-up sprayer (0.24mg m(-3)). During tunnel boring machine (TBM) activities, the GM respirable dust concentration was 0.54mg m(-3). The GM respirable elemental carbon concentration for all the TBM operators was 18 µg m(-3); with the highest concentration measured on a segment lifter. The BC concentrations were higher in the SCL environment in comparison to the TBM environment (daily GM 18-54 µg m(-3) versus 3-6 µg m(-3)). This small-scale monitoring campaign provides additional personal data on exposures experienced by underground tunnel construction workers. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Programs=data=first-class citizens in a computational world

DEFF Research Database (Denmark)

Jones, Neil; Simonsen, Jakob Grue

2012-01-01

and without arcane data encodings. Next, some of the best known among the numerous existing MOCs are described, and we develop a list of traits an ‘ideal’ MOC should possess from our perspective. We make no attempt to consider all models put forth since Turing's 1936 paper, and the selection of models covered...

Sustainable construction: construction and demolition waste reconsidered.

Science.gov (United States)

del Río Merino, Mercedes; Izquierdo Gracia, Pilar; Weis Azevedo, Isabel Salto

2010-02-01

Construction activity in Europe has increased substantially in the past decade. Likewise, there has also been a commensurate rise in the generation of construction and demolition waste (C&DW). This, together with the fact that in many European countries the rate of recycling and reuse of C&DW is still quite low has engendered a serious environmental problem and a motivation to develop strategies and management plans to solve it. Due to its composition, there is a significant potential to reuse and/or recycle C&DW, and thereby, contribute to improving the sustainability of construction and development, but practical procedures are not yet widely known or practiced in the construction industry. This article (a) summarizes the different applications that are presently practiced to optimize the recovery and/or application of C&DW for reuse, and (b) proposes various measures and strategies to improve the processing of this waste. The authors suggest that to enhance environmental effectiveness, a conscious and comprehensive C&DW management plan should be implemented in each jurisdiction. More precisely, this study presents a holistic approach towards C&DW management, through which environmental benefits can be achieved through the application of new construction methods that can contribute to sustainable growth.

Alcohol-cue exposure effects on craving and attentional bias in underage college-student drinkers.

Science.gov (United States)

Ramirez, Jason J; Monti, Peter M; Colwill, Ruth M

2015-06-01

The effect of alcohol-cue exposure on eliciting craving has been well documented, and numerous theoretical models assert that craving is a clinically significant construct central to the motivation and maintenance of alcohol-seeking behavior. Furthermore, some theories propose a relationship between craving and attention, such that cue-induced increases in craving bias attention toward alcohol cues, which, in turn, perpetuates craving. This study examined the extent to which alcohol cues induce craving and bias attention toward alcohol cues among underage college-student drinkers. We designed within-subject cue-reactivity and visual-probe tasks to assess in vivo alcohol-cue exposure effects on craving and attentional bias on 39 undergraduate college drinkers (ages 18-20). Participants expressed greater subjective craving to drink alcohol following in vivo cue exposure to a commonly consumed beer compared with water exposure. Furthermore, following alcohol-cue exposure, participants exhibited greater attentional biases toward alcohol cues as measured by a visual-probe task. In addition to the cue-exposure effects on craving and attentional bias, within-subject differences in craving across sessions marginally predicted within-subject differences in attentional bias. Implications for both theory and practice are discussed. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Use of eHealth technologies to enable the implementation of musculoskeletal Models of Care: Evidence and practice.

Science.gov (United States)

Slater, Helen; Dear, Blake F; Merolli, Mark A; Li, Linda C; Briggs, Andrew M

2016-06-01

Musculoskeletal (MSK) conditions are the second leading cause of morbidity-related burden of disease globally. EHealth is a potentially critical factor that enables the implementation of accessible, sustainable and more integrated MSK models of care (MoCs). MoCs serve as a vehicle to drive evidence into policy and practice through changes at a health system, clinician and patient level. The use of eHealth to implement MoCs is intuitive, given the capacity to scale technologies to deliver system and economic efficiencies, to contribute to sustainability, to adapt to low-resource settings and to mitigate access and care disparities. We follow a practice-oriented approach to describing the 'what' and 'how' to harness eHealth in the implementation of MSK MoCs. We focus on the practical application of eHealth technologies across care settings to those MSK conditions contributing most substantially to the burden of disease, including osteoarthritis and inflammatory arthritis, skeletal fragility-associated conditions and persistent MSK pain. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Convergence analysis of CMADR acceleration for the method of characteristics

International Nuclear Information System (INIS)

Park, Young Ryong; Cho, Nam Zin

2005-01-01

As the nuclear reactor core becomes more complex, heterogeneous, and geometrically irregular, the method of characteristics (MOC) is gaining its wide use in the neutron transport calculations. However, the long computer times require good acceleration methods. In our previous paper, the concept of coarse-mesh angular dependent rebalance (CMADR) acceleration was described and applied to the MOC calculations. The method is based on angular dependent rebalance factors defined on the coarse-mesh boundaries; a coarse-mesh consists of several fine meshes that may be (1) heterogeneous and (2) of mixed geometries with irregular or unstructured mesh shapes. In addition, (3) the coarse-mesh boundaries may not coincide with the structural interfaces of the problem and can be chosen artificially for convenience. The CMADR acceleration method on the MOC scheme that enables the very desirable features (1), (2), and (3) above is new in the neutron transport literature to the best of the authors knowledge. In this paper, we analyze the convergence of CMADR acceleration for MOC calculation in x-y-z (infinite) geometry by using Fourier analysis

A massively parallel method of characteristic neutral particle transport code for GPUs

International Nuclear Information System (INIS)

Boyd, W. R.; Smith, K.; Forget, B.

2013-01-01

Over the past 20 years, parallel computing has enabled computers to grow ever larger and more powerful while scientific applications have advanced in sophistication and resolution. This trend is being challenged, however, as the power consumption for conventional parallel computing architectures has risen to unsustainable levels and memory limitations have come to dominate compute performance. Heterogeneous computing platforms, such as Graphics Processing Units (GPUs), are an increasingly popular paradigm for solving these issues. This paper explores the applicability of GPUs for deterministic neutron transport. A 2D method of characteristics (MOC) code - OpenMOC - has been developed with solvers for both shared memory multi-core platforms as well as GPUs. The multi-threading and memory locality methodologies for the GPU solver are presented. Performance results for the 2D C5G7 benchmark demonstrate 25-35 x speedup for MOC on the GPU. The lessons learned from this case study will provide the basis for further exploration of MOC on GPUs as well as design decisions for hardware vendors exploring technologies for the next generation of machines for scientific computing. (authors)

Barriers of lean construction implementation in the Moroccan construction industry

Science.gov (United States)

Bajjou, Mohamed Saad; Chafi, Anas

2018-04-01

Improving the production system performance has become a fundamental pillar that must be taken into consideration in the construction industry. Recent developments in the construction sector have led to renewed interest in new techniques of management. Lean Construction is a very effective approach that has gained a high popularity by its ability to eliminate waste and maximize the value for the customer. Although both developed and developing countries have gained large benefits by implementing Lean Construction approach, several experiences showed many barriers that are hindering its implementation especially in developing countries. This paper aims to assess the critical barriers to the successful implementation in the Moroccan construction industry. Based on a literature review, followed by an analysis of data collected from a questionnaire survey which targeted 330 practitioners in the Moroccan construction field, several barriers were identified as key barriers. The findings of this investigation revealed that there are significant barriers such as Lack of knowledge about Lean Construction concepts, Unskilled Human Resources, and insufficient financial resources.

Prefabrication in Building Construction: A Perspective of Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Nafees Ahmed Memon

2014-07-01

Full Text Available Construction industry is facing many problems in terms of construction waste, quality, environment, durability, safety and higher construction cost. Adoption of prefabrication is a possible solution to such problems. Accordingly, there is a need to study the prospects that would stimulate the appropriate discussion of the suitability of prefabrication and other construction methods for concrete buildings. Therefore, this study investigates the significance of advantages in adopting prefabrication along with hindrances through questionnaire survey. The data has been analyzed using RIW (Relative Importance Weight method as a MCDM approach. The results depict that main advantages of prefabrication are ?Shorter construction time? and ?Less construction site waste?. The top hindrances in adopting prefabrication as identified in this study are: ?Higher initial construction cost? and ?Inflexible for design changes?. Based on the survey results and apparent progress in the adoption of prefabrication around the world, it is concluded that the use of prefabrication is likely to increase in developing countries like Pakistan

Prefabrication in building construction: a perspective of pakistan construction industry

International Nuclear Information System (INIS)

Memon, N.A.; Memon, F.A.; Khehro, S.H.

2014-01-01

Construction industry is facing many problems in terms of construction waste, quality, environment, durability, safety and higher construction cost. Adoption of prefabrication is a possible solution to such problems. Accordingly, there is a need to study the prospects that would stimulate the appropriate discussion of the suitability of prefabrication and other construction methods for concrete buildings. Therefore, this study investigates the significance of advantages in adopting prefabrication along with hindrances through questionnaire survey. The data has been analyzed using RIW (Relative Importance Weight) method as a MCDM approach. The results depict that main advantages of prefabrication are Shorter construction time and Less construction site waste. The top hindrances in adopting prefabrication as identified in this study are: Higher initial construction cost and Inflexible for design changes. Based on the survey results and apparent progress in the adoption of prefabrication around the world, it is concluded that the use of prefabrication is likely to increase in developing countries like Pakistan. (author)

Review of Constructed Subsurface Flow vs. Surface Flow Wetlands

International Nuclear Information System (INIS)

HALVERSON, NANCY

2004-01-01

The purpose of this document is to use existing documentation to review the effectiveness of subsurface flow and surface flow constructed wetlands in treating wastewater and to demonstrate the viability of treating effluent from Savannah River Site outfalls H-02 and H-04 with a subsurface flow constructed wetland to lower copper, lead and zinc concentrations to within National Pollutant Discharge Elimination System (NPDES) Permit limits. Constructed treatment wetlands are engineered systems that have been designed and constructed to use the natural functions of wetlands for wastewater treatment. Constructed wetlands have significantly lower total lifetime costs and often lower capital costs than conventional treatment systems. The two main types of constructed wetlands are surface flow and subsurface flow. In surface flow constructed wetlands, water flows above ground. Subsurface flow constructed wetlands are designed to keep the water level below the top of the rock or gravel media, thus minimizing human and ecological exposure. Subsurface flow wetlands demonstrate higher rates of contaminant removal per unit of land than surface flow (free water surface) wetlands, therefore subsurface flow wetlands can be smaller while achieving the same level of contaminant removal. Wetlands remove metals using a variety of processes including filtration of solids, sorption onto organic matter, oxidation and hydrolysis, formation of carbonates, formation of insoluble sulfides, binding to iron and manganese oxides, reduction to immobile forms by bacterial activity, and uptake by plants and bacteria. Metal removal rates in both subsurface flow and surface flow wetlands can be high, but can vary greatly depending upon the influent concentrations and the mass loading rate. Removal rates of greater than 90 per cent for copper, lead and zinc have been demonstrated in operating surface flow and subsurface flow wetlands. The constituents that exceed NPDES limits at outfalls H-02 a nd H

Frost in Charitum Montes

Science.gov (United States)

2003-01-01

MGS MOC Release No. MOC2-387, 10 June 2003This is a Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) wide angle view of the Charitum Montes, south of Argyre Planitia, in early June 2003. The seasonal south polar frost cap, composed of carbon dioxide, has been retreating southward through this area since spring began a month ago. The bright features toward the bottom of this picture are surfaces covered by frost. The picture is located near 57oS, 43oW. North is at the top, south is at the bottom. Sunlight illuminates the scene from the upper left. The area shown is about 217 km (135 miles) wide.

Exposure assessment of a cyclist to PM10 and ultrafine particles.

Science.gov (United States)

Berghmans, P; Bleux, N; Int Panis, L; Mishra, V K; Torfs, R; Van Poppel, M

2009-02-01

Estimating personal exposure to air pollution is a crucial component in identifying high-risk populations and situations. It will enable policy makers to determine efficient control strategies. Cycling is again becoming a favorite mode of transport both in developing and in developed countries due to increasing traffic congestion and environmental concerns. In Europe, it is also seen as a healthy sports activity. However, due to high levels of hazardous pollutants in the present day road microenvironment the cyclist might be at a higher health risk due to higher breathing rate and proximity to the vehicular exhaust. In this paper we present estimates of the exposure of a cyclist to particles of various size fractions including ultrafine particles (UFP) in the town of Mol (Flanders, Belgium). The results indicate relatively higher UFP concentration exposure during morning office hours and moderate UFP levels during afternoon. The major sources of UFP and PM(10) were identified, which are vehicular emission and construction activities, respectively. We also present a dust mapping technique which can be a useful tool for town planners and local policy makers.

Designing an international industrial hygiene database of exposures among workers in the asphalt industry.

Science.gov (United States)

Burstyn, I; Kromhout, H; Cruise, P J; Brennan, P

2000-01-01

The objective of this project was to construct a database of exposure measurements which would be used to retrospectively assess the intensity of various exposures in an epidemiological study of cancer risk among asphalt workers. The database was developed as a stand-alone Microsoft Access 2.0 application, which could work in each of the national centres. Exposure data included in the database comprised measurements of exposure levels, plus supplementary information on production characteristics which was analogous to that used to describe companies enrolled in the study. The database has been successfully implemented in eight countries, demonstrating the flexibility and data security features adequate to the task. The database allowed retrieval and consistent coding of 38 data sets of which 34 have never been described in peer-reviewed scientific literature. We were able to collect most of the data intended. As of February 1999 the database consisted of 2007 sets of measurements from persons or locations. The measurements appeared to be free from any obvious bias. The methodology embodied in the creation of the database can be usefully employed to develop exposure assessment tools in epidemiological studies.

Case inflection of construct state constructions in Dinka

DEFF Research Database (Denmark)

Andersen, Torben

2016-01-01

Dinka, a Nilo-Saharan language, is largely monosyllabic, but nevertheless it has a fairly rich morphology. Thus, most of its morphology is expressed by alternations in phonological material of the root. The inflectional categories of nouns manifested in this way include state and case in addition...... to number. The state category consists of an absolute state and two construct states. The case category includes a nominative, a genitive, an allative, and an essive/ablative. The present article shows how case inflection is manifested in complex noun phrases consisting of a noun in a construct state...... simultaneously carry state information and case information. Thus, the case inflection of construct state constructions in Dinka adds yet another layer of nonlinear morphology to nouns in this language....

Exposure to radon and mortality standard in a coal miner cohort in Brazil

International Nuclear Information System (INIS)

Veiga, Lene Holanda Sadler; Amaral, Eliana; Koifman, Sergio

2002-01-01

High levels of radon and his products have been found at a underground coal mine, at the Southern Brazil, in operation since 1945. The 222 Rn concentration levels measured were 7000 Bq/m 3 and 0.7 WL for the radon sons (7.7 WLM/year), which are values considered higher than the limits for intervention in a working environments (500 to 1500 Bq/m3 of 222 Rn) and the occupational exposure limit (4.0 WLM/year). Due to the unique opportunity found in these miner group, it was decided to construct a cohort with miners from that mining (underground and surface) viewing the evaluation of the possible effects to the health decurrens from that exposure

Usability Constructs

DEFF Research Database (Denmark)

Hertzum, Morten; Clemmesen, Torkil; Hornbæk, Kasper Anders Søren

2007-01-01

Whereas research on usability predominantly employs universal definitions of the aspects that comprise usability, people experience their use of information systems through personal constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affected...... use of constructs traditionally associated with usability (e.g., easy-to-use, intuitive, and liked). Further analysis of the data is ongoing...

Models of care for musculoskeletal health: a cross-sectional qualitative study of Australian stakeholders' perspectives on relevance and standardised evaluation.

Science.gov (United States)

Briggs, Andrew M; Jordan, Joanne E; Speerin, Robyn; Jennings, Matthew; Bragge, Peter; Chua, Jason; Slater, Helen

2015-11-16

The prevalence and impact of musculoskeletal conditions are predicted to rapidly escalate in the coming decades. Effective strategies are required to minimise 'evidence-practice', 'burden-policy' and 'burden-service' gaps and optimise health system responsiveness for sustainable, best-practice healthcare. One mechanism by which evidence can be translated into practice and policy is through Models of Care (MoCs), which provide a blueprint for health services planning and delivery. While evidence supports the effectiveness of musculoskeletal MoCs for improving health outcomes and system efficiencies, no standardised national approach to evaluation in terms of their 'readiness' for implementation and 'success' after implementation, is yet available. Further, the value assigned to MoCs by end users is uncertain. This qualitative study aimed to explore end users' views on the relevance of musculoskeletal MoCs to their work and value of a standardised evaluation approach. A cross-sectional qualitative study was undertaken. Subject matter experts (SMEs) with health, policy and administration and consumer backgrounds were drawn from three Australian states. A semi-structured interview schedule was developed and piloted to explore perceptions about musculoskeletal MoCs including: i) aspects important to their work (or life, for consumers) ii) usefulness of standardised evaluation frameworks to judge 'readiness' and 'success' and iii) challenges associated with standardised evaluation. Verbatim transcripts were analysed by two researchers using a grounded theory approach to derive key themes. Twenty-seven SMEs (n = 19; 70.4 % female) including five (18.5 %) consumers participated in the study. MoCs were perceived as critical for influencing and initiating changes to best-practice healthcare planning and delivery and providing practical guidance on how to implement and evaluate services. A 'readiness' evaluation framework assessing whether critical components across the

Chip-based human liver-intestine and liver-skin co-cultures--A first step toward systemic repeated dose substance testing in vitro.

Science.gov (United States)

Maschmeyer, Ilka; Hasenberg, Tobias; Jaenicke, Annika; Lindner, Marcus; Lorenz, Alexandra Katharina; Zech, Julie; Garbe, Leif-Alexander; Sonntag, Frank; Hayden, Patrick; Ayehunie, Seyoum; Lauster, Roland; Marx, Uwe; Materne, Eva-Maria

2015-09-01

Systemic repeated dose safety assessment and systemic efficacy evaluation of substances are currently carried out on laboratory animals and in humans due to the lack of predictive alternatives. Relevant international regulations, such as OECD and ICH guidelines, demand long-term testing and oral, dermal, inhalation, and systemic exposure routes for such evaluations. So-called "human-on-a-chip" concepts are aiming to replace respective animals and humans in substance evaluation with miniaturized functional human organisms. The major technical hurdle toward success in this field is the life-like combination of human barrier organ models, such as intestine, lung or skin, with parenchymal organ equivalents, such as liver, at the smallest biologically acceptable scale. Here, we report on a reproducible homeostatic long-term co-culture of human liver equivalents with either a reconstructed human intestinal barrier model or a human skin biopsy applying a microphysiological system. We used a multi-organ chip (MOC) platform, which provides pulsatile fluid flow within physiological ranges at low media-to-tissue ratios. The MOC supports submerse cultivation of an intact intestinal barrier model and an air-liquid interface for the skin model during their co-culture with the liver equivalents respectively at (1)/100.000 the scale of their human counterparts in vivo. To increase the degree of organismal emulation, microfluidic channels of the liver-skin co-culture could be successfully covered with human endothelial cells, thus mimicking human vasculature, for the first time. Finally, exposure routes emulating oral and systemic administration in humans have been qualified by applying a repeated dose administration of a model substance - troglitazone - to the chip-based co-cultures. Copyright © 2015. Published by Elsevier B.V.

Exposure Forecaster

Data.gov (United States)

U.S. Environmental Protection Agency — The Exposure Forecaster Database (ExpoCastDB) is EPA's database for aggregating chemical exposure information and can be used to help with chemical exposure...

A construct with fluorescent indicators for conditional expression of miRNA

Directory of Open Access Journals (Sweden)

Xia Xugang

2008-10-01

Full Text Available Abstract Background Transgenic RNAi holds promise as a simple, low-cost, and fast method for reverse genetics in mammals. It may be particularly useful for producing animal models for hypomorphic gene function. Inducible RNAi that permits spatially and temporally controllable gene silencing in vivo will enhance the power of transgenic RNAi approach. Furthermore, because microRNA (miRNA targeting specific genes can be expressed simultaneously with protein coding genes, incorporation of fluorescent marker proteins can simplify the screening and analysis of transgenic RNAi animals. Results We sought to optimally express a miRNA simultaneously with a fluorescent marker. We compared two construct designs. One expressed a red fluorescent protein (RFP and a miRNA placed in its 3' untranslated region (UTR. The other expressed the same RFP and miRNA, but the precursor miRNA (pre-miRNA coding sequence was placed in an intron that was inserted into the 3'-UTR. We found that the two constructs expressed comparable levels of miRNA. However, the intron-containing construct expressed a significantly higher level of RFP than the intron-less construct. Further experiments indicate that the 3'-UTR intron enhances RFP expression by its intrinsic gene-expression-enhancing activity and by eliminating the inhibitory effect of the pre-miRNA on the expression of RFP. Based on these findings, we incorporated the intron-embedded pre-miRNA design into a conditional expression construct that employed the Cre-loxP system. This construct initially expressed EGFP gene, which was flanked by loxP sites. After exposure to Cre recombinase, the transgene stopped EGFP expression and began expression of RFP and a miRNA, which silenced the expression of specific cellular genes. Conclusion We have designed and tested a conditional miRNA-expression construct and showed that this construct expresses both the marker genes strongly and can silence the target gene efficiently upon Cre

Occupational exposure to crystalline silica at Alberta work sites.

Science.gov (United States)

Radnoff, Diane; Todor, Maria S; Beach, Jeremy

2014-01-01

Although crystalline silica has been recognized as a health hazard for many years, it is still encountered in many work environments. Numerous studies have revealed an association between exposure to respirable crystalline silica and the development of silicosis and other lung diseases including lung cancer. Alberta Jobs, Skills, Training and Labour conducted a project to evaluate exposure to crystalline silica at a total of 40 work sites across 13 industries. Total airborne respirable dust and respirable crystalline silica concentrations were quite variable, but there was a potential to exceed the Alberta Occupational Exposure Limit (OEL) of 0.025 mg/m(3) for respirable crystalline silica at many of the work sites evaluated. The industries with the highest potentials for overexposure occurred in sand and mineral processing (GM 0.090 mg/m(3)), followed by new commercial building construction (GM 0.055 mg/m(3)), aggregate mining and crushing (GM 0.048 mg/m(3)), abrasive blasting (GM 0.027 mg/m(3)), and demolition (GM 0.027 mg/m(3)). For worker occupations, geometric mean exposure ranged from 0.105 mg/m(3) (brick layer/mason/concrete cutting) to 0.008 mg/m(3) (dispatcher/shipping, administration). Potential for GM exposure exceeding the OEL was identified in a number of occupations where it was not expected, such as electricians, carpenters and painters. These exposures were generally related to the specific task the worker was doing, or arose from incidental exposure from other activities at the work site. The results indicate that where there is a potential for activities producing airborne respirable crystalline silica, it is critical that the employer include all worker occupations at the work site in their hazard assessment. There appears to be a relationship between airborne total respirable dust concentration and total respirable dust concentrations, but further study is require to fully characterize this relationship. If this relationship holds true

Optimization of selective exposure radiography of the chest

International Nuclear Information System (INIS)

Naimuddin, S.

1986-01-01

A major technical limitation in conventional chest radiography is the mismatch of the x-ray transmission dynamic range with the useful exposure range of a radiographic film when a patient is presented with a uniform incident exposure field. The goal of this project is to develop a faster and more reliable selective exposure system to fabricate and position a compensating filter (or digital beam attenuator, DBA) for clinical use. The essential components of this system include a dose efficient test-image detector, a special purpose field grabber (image memory), a custom made fast printer, a transport channel, and a computer. The fabrication process begins with acquisition of a 64 x 64 format low-dose patient image which undergoes corrections for detector nonuniformity and scatter. The corrected data after log transformation are used to calculate thickness of filter material needed to compensate for the image dynamic range. Using this thickness information the computer controls the printer which fabricates as attenuator by overprinting multiple layers of cerium oxide on a 35 mm film substrate. Although the images are acquired in a 64 x 64 format, the attenuator is constructed in a dithered 16 x 16 format using a special algorithm. After fabrication, the attenuator is automatically conveyed through the transport channel and is positioned in the x-ray beam between the collimator and x-ray tube before the final compensated radiograph is taken

EPHECT III: Health risk assessment of exposure to household consumer products.

Science.gov (United States)

Trantallidi, M; Dimitroulopoulou, C; Wolkoff, P; Kephalopoulos, S; Carrer, P

2015-12-01

specifically constructed for the present study, following a 'most-representative worst-case scenario' approach for exposure and health risk assessment. Copyright © 2015 Elsevier B.V. All rights reserved.

Nd isotopic structure of the Pacific Ocean 70-30 Ma and numerical evidence for vigorous ocean circulation and ocean heat transport in a greenhouse world

Science.gov (United States)

Thomas, Deborah J.; Korty, Robert; Huber, Matthew; Schubert, Jessica A.; Haines, Brian

2014-05-01

The oceanic meridional overturning circulation (MOC) is a crucial component of the climate system, impacting heat and nutrient transport, and global carbon cycling. Past greenhouse climate intervals present a paradox because their weak equator-to-pole temperature gradients imply a weaker MOC, yet increased poleward oceanic heat transport appears to be required to maintain these weak gradients. To investigate the mode of MOC that operated during the early Cenozoic, we compare new Nd isotope data with Nd tracer-enabled numerical ocean circulation and coupled climate model simulations. Assimilation of new Nd isotope data from South Pacific Deep Sea Drilling Project and Ocean Drilling Program Sites 323, 463, 596, 865, and 869 with previously published data confirm the hypothesized MOC characterized by vigorous sinking in the South and North Pacific 70 to 30 Ma. Compilation of all Pacific Nd isotope data indicates vigorous, distinct, and separate overturning circulations in each basin until 40 Ma. Simulations consistently reproduce South Pacific and North Pacific deep convection over a broad range of conditions, but cases using strong deep ocean vertical mixing produced the best data-model match. Strong mixing, potentially resulting from enhanced abyssal tidal dissipation, greater interaction of wind-driven internal wave activity with submarine plateaus, or higher than modern values of the geothermal heat flux enable models to achieve enhanced MOC circulation rates with resulting Nd isotope distributions consistent with the proxy data. The consequent poleward heat transport may resolve the paradox of warmer worlds with reduced temperature gradients.

Epidemiology of work-related injuries among construction workers of ilam (Western iran) during 2006 - 2009.

Science.gov (United States)

Moradinazar, Mehdi; Kurd, Nematullah; Farhadi, Rozita; Amee, Vahid; Najafi, Farid

2013-10-01

Work-related injuries are the most important cause of work absence, disability, retirement, mutilation, and even mortality. In Iran a great number of work-related injuries are occurred in construction industry. However, less than 12% of total workers are active in the construction sector. This study aimed to determine the incidence rate of work-related injuries, the type of injuries, and its other determinants among the construction workers of Ilam (Iran). The participants were the workers and staffs working in the construction activities of Ilam in Western Iran. All the recorded injuries and deaths related to the construction workers of Ilam from 2006-2009 were collected from the Bureau of Labor and Social Affairs and then analyzed by the statistical package of SPSS (version 19, for Windows). During 2006 - 2009 in Ilam, 387workers encountered the building accidents. Their mean age was 34.3 years (SD = 12.4). The average annual incidence of work-related injuries among the workers was 8.2 per 1000 workers. Fracture with 275 cases (71%) was the most common outcome of injuries, and slipping and falling with 77 cases (36%) were the most important events and exposures. The most important factor related to injuries was the lack of surveillance by employers which was also related with the severity of accident-induced injuries (P constructive workers.

Design of a recirculating radon progeny aerosol generation and animal exposure system

International Nuclear Information System (INIS)

Newton, G.J.; Cuddihy, R.G.; Yeh, H.C.; Barr, E.B.; Boecker, B.B.

1988-01-01

Inhalation studies are being conducted at ITRI using laboratory animals exposed to radon-222 progeny attached to vector aerosols that are typical of indoor environments. The purpose of these studies is to identify the cells at risk from inhaled radon progeny and their locations within the respiratory tract. These studies require exposures up to 1000 working level months (WLM) within a few hours. Thus, large amounts of radium-226 are needed to produce the gaseous radon-222. A once-through-exposure-system was considered to be impractical because of statutory discharge limitations and the large amounts of radium that would be required. Therefore, a recirculating exposure system was designed and constructed that removes the aerosol after passing through the exposure chambers and recirculates purified air and radon. The purified radon is mixed with freshly evolving radon from a radon generator and passed Into a reaction-aging chamber where attachment of radon progeny to the vector aerosol occurs. The design includes: (1) 50-200 mg radium-226 in a radon generator, (2) 40 L/min total flow rate, (3) CO 2 removal, (4) reconstitution of oxygen tension and water vapor content to atmospheric levels, and (5) a trap for radon gas. A radon progeny exposure concentration in the range of 4,000 to 50,000 WL is being produced. (author)

Canadian individual risks of radon-induced lung cancer for different exposure profiles.

Science.gov (United States)

Chen, Jing

2005-01-01

Indoor radon has been determined to be the second leading cause of lung cancer after tobacco smoking. There is an increasing need among radiation practitioners to have numerical values of lung cancer risks for men and women, ever-smokers and never-smokers exposed to radon in homes. This study evaluates individual risks for the Canadian population exposed to radon in homes at different radon concentrations and for different periods of their lives. Based on the risk model developed recently by U.S. Environmental Protection Agency (EPA), individual risks of radon-induced lung cancers are calculated with Canadian age-specific rates for overall and lung cancer mortalities (1996-2000) as well as the Canadian smoking prevalence data in 2002. Convenient tables of lifetime relative risks are constructed for lifetime exposures and short exposures between any two age intervals from 0 to 110, and for various radon concentrations found in homes from 50 to 1000 Bq/m3. The risk of developing lung cancer from residential radon exposure increases with radon concentration and exposure duration. For short exposure periods, such as 10 or 20 years, risks are higher in middle age groups (30-50) compared especially to the later years. Individuals could lower their risks significantly by reducing radon levels earlier in life. The tables could help radiation protection practitioners to better communicate indoor radon risk to members of the public.

The role of presence in virtual reality exposure therapy.

Science.gov (United States)

Price, Matthew; Anderson, Page

2007-01-01

A growing body of literature suggests that virtual reality is a successful tool for exposure therapy in the treatment of anxiety disorders. Virtual reality (VR) researchers posit the construct of presence, defined as the interpretation of an artificial stimulus as if it were real, to be a presumed factor that enables anxiety to be felt during virtual reality exposure therapy (VRE). However, a handful of empirical studies on the relation between presence and anxiety in VRE have yielded mixed findings. The current study tested the following hypotheses about the relation between presence and anxiety in VRE with a clinical sample of fearful flyers: (1) presence is related to in-session anxiety; (2) presence mediates the extent that pre-existing (pre-treatment) anxiety is experienced during exposure with VR; (3) presence is positively related to the amount of phobic elements included within the virtual environment; (4) presence is related to treatment outcome. Results supported presence as a factor that contributes to the experience of anxiety in the virtual environment as well as a relation between presence and the phobic elements, but did not support a relation between presence and treatment outcome. The study suggests that presence may be a necessary but insufficient requirement for successful VRE.

Reconstruction of historical exposures at a Welsh nickel refinery (1953-2000).

Science.gov (United States)

Sivulka, Donna J; Seilkop, Steven K; Lascelles, Keith; Conard, Bruce R; Jones, Sian F; Collinson, Eric C

2014-07-01

Past epidemiological studies of workers in a nickel refinery in Clydach, Wales, have shown evidence of large excess respiratory cancer mortality risks [lung cancer relative risk (RR) ≈ 3; nasal cancer RR ≈ 140] in those employed prior to 1930, with risks dropping dramatically in workers hired subsequently. The pre-1930 risks have generally been attributed to high exposures to mixtures of nickel compounds. More recent studies of this refinery's workers have focused on those first hired in 1953, when many of the operations that presumably gave rise to the high exposures were no longer in operation. While these studies have shown greatly decreased lung cancer risks overall (RR ≈ 1.4), and no substantive evidence of increased nasal cancer risk, the absence of reliable exposure estimates have made it difficult to ascertain whether the increased lung cancer risks are nickel related or due to other factors. This study uses nickel measurements from the 1970s to the present, documentation of process changes, and dust measurements taken around the 1950s to construct an exposure matrix for the recent cohort. It provides evidence of at least 30-fold decreases in levels of nickel exposure from the 1950s to the present, with estimated inhalable nickel concentrations in the 1950s in excess of 5mg Ni m(-3). © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Potential for occupational and environmental exposure to ten carcinogens in Toronto

Energy Technology Data Exchange (ETDEWEB)

Muller, P. [ToxProbe Inc., Toronto, ON (Canada)

2002-03-01

A study was conducted in which several contaminants were assessed for their toxicological properties, potencies and occupational and environmental exposures in the city of Toronto. The contaminants included 1,3-butadiene, asbestos, benzene, cadmium, chromium, dioxins, formaldehyde, polycyclic aromatic hydrocarbons (PAHs), tetrachloroethylene, and trichloroethylene. The International Agency for Research on Cancer, the United States Environmental Protection Agency, and Health Canada have classified 9 of the 10 substances as human carcinogens. Tetrachloroethylene was classified as a probable human carcinogen. It was noted that there is no level of exposure for these chemicals that is without some risk. The information on the levels of selected contaminants in the workplace were obtained from existing literature. The sectors with the highest number of potentially exposed workers to these contaminants include the textiles industry, footwear manufacturing, wood products manufacturing, rubber products manufacturing, non-metallic mineral products manufacturing, fabricated metal products manufacturing, construction, land transport, and household services. The report discussed sources of emissions, routes and pathways of exposures and environmental levels, including outdoor air levels water concentrations, soil concentrations, and food concentrations. The report does not estimate the actual risk to Toronto residents due to environmental exposure to these carcinogens because data are insufficient to conduct such an assessment. However, some previous studies have indicated that exposure from ambient and indoor air has the greatest impact on human health. It is recommended that the city of Toronto remain up to date on the regulatory status of these chemicals. refs., tabs., figs., appendices.

Measurement of personal exposure to volatile organic compounds and particle associated PAH in three UK regions.

Science.gov (United States)

Saborit, Juana Mari Delgado; Aquilina, Noel J; Meddings, Claire; Baker, Stephen; Vardoulakis, Sotiris; Harrison, Roy M

2009-06-15

Personal exposures to 15 volatile organic compounds (VOC) and 16 polycyclic aromatic hydrocarbons (PAH) of 100 adult nonsmokers living in three UK areas, namely London, West Midlands, and rural South Wales, were measured using an actively pumped sampler carried around by the volunteers for 5/1 (VOC/PAH) consecutive 24-h periods, following their normal lifestyle. Results from personal exposure measurements categorized by geographical location, type of dwelling, and exposure to environmental tobacco smoke (ETS) are presented. The average personal exposure concentration to benzene, 1,3-butadiene, and benzo(a)pyrene representing the main carcinogenic components of the VOC and PAH mixture were 2.2 +/- 2.5 microg/m3, 0.4 +/- 0.7 microg/m3, and 0.3 +/- 0.7 ng/m3 respectively. The association of a number of generic factors with personal exposure concentrations was investigated, including first-line property, traffic, the presence of an integral garage, and ETS. Only living in houses with integral garages and being exposed to ETS were identified as unequivocal contributors to VOC personal exposure, while only ETS had a clear effect upon PAH personal exposures. The measurements of personal exposures were compared with health-based European and UK air quality guidelines, with some exceedences occurring. Activities contributing to high personal exposures included the use of a fireplace in the home, ETS exposure, DIY (i.e., construction and craftwork activities), and photocopying, among others.

The effect of the tramway track construction on the aerosol pollution in Debrecen, Hungary

Energy Technology Data Exchange (ETDEWEB)

Furu, E. [Hungarian Academy of Science Institute for Nuclear Research, Laboratory of Ion Beam Applications, H-4026 Debrecen, Bem tér 18/C (Hungary); Katona-Szabo, I. [University of Debrecen, P.O. Box 51, H-4001 Debrecen (Hungary); Angyal, A.; Szoboszlai, Z.; Török, Zs.; Kertész, Zs. [Hungarian Academy of Science Institute for Nuclear Research, Laboratory of Ion Beam Applications, H-4026 Debrecen, Bem tér 18/C (Hungary)

2015-11-15

In this study the effect of a new tramway track construction on the atmospheric aerosol concentration and composition in Debrecen, Hungary, was investigated. The tramway track construction started in 2011 and it was finished in 2013. PM{sub 2.5} and PM{sub 10} daily samples were collected with a Gent type filter unit in an urban background site 2 times a week. In addition, a sampling campaign direct next to the construction site was performed with 2-stage personal samplers between the 21{sup st} and 30{sup th} of September, 2011 – four hours a day, during working hours. We studied the change in concentration and composition of fine and coarse fraction aerosol in comparison with the average of the past 5 years. An additional goal was to investigate the personal aerosol exposure near to the construction sites. In the urban background site a significant increase could be observed both for the PM{sub 2.5} and PM{sub 10} concentrations for 2012 and 2013. In the elemental composition the concentration of Fe, Mn, Ni, and Cr increased significantly for the construction period. The PM{sub 10} concentrations measured direct next to the construction site were 10–20 higher than those measured at our urban background site or the data provided by the Hungarian Air Quality monitoring network. Days with very high Pb pollution level (∼3000 ng/m{sup 3}) was also recorded.

Asbestos exposure in Israel: findings, issues and needs

Energy Technology Data Exchange (ETDEWEB)

Richter, E.D.

1984-02-01

In Israel, since the 1950s, at least several thousand workers, their wives and children, and possibly many others, have been or still may be exposed to hazardous amounts of airborne asbestos fibers. These are found both in asbestos-based industries (asbestos cement, textiles and brake linings) and trades with asbestos exposure (construction, shipyard repair, boiler maintenance, insulation work). These people are at increased risk for disability or illness, or for premature death from asbestosis, from lung cancer, from exacerbation of preexisting respiratory disease (especially if they smoke), from mesothelioma, from gastrointestinal cancer, and from other malignancies. Although there has been progress, much still has to be done in the areas of legislation, standard setting, exposure control, technology, surveillance, smoking cessation, and medical care and follow-up. Compensation is needed to care for those workers currently or previously exposed, as well as for their families and others at risk. A national policy for protecting and caring for those formerly or currently exposed is indicated by the review of the situation in Israel.

Leadership Quality for Malaysia Construction Leader to Steer a Success Construction Project

Directory of Open Access Journals (Sweden)

Ngah Nasaruddin Nur Ain

2016-01-01

Full Text Available Issues that dominate the construction industry for the long time such as time overrun, cost overrun, quality of construction and also safety during the construction process are difficult to resolve because of several factors involved which amongst them are leadership quality in the industry. Solving these issues can make the industry more sustainable in nature. This paper presents the need of leadership quality among construction parties involved to steer a construction project successfully. Literature work found that 11 leadership qualities to ensure construction project success. From the frequency analysis, five most dominant leadership qualities are team building, communication skill, visioning, planning & strategy skill, and decision making. Beside the literature, this study also seeks an opinion from a senior leader of a successful construction company regarding the need of these qualities amongst parties to resolve the construction issues. The results from an interview session indicate that he fully agreed with the need of all the qualities in the construction industry. This shows that there is a strong relationship between solving the issues with the leadership quality in ensuring construction project success. These qualities should be further investigated to acquire a better representation of leadership quality in resolving construction issues for Malaysia construction industry.

Towards green construction

International Nuclear Information System (INIS)

Bajracharya, Bijaya B.; Shrestha, Prasanna M.

2000-01-01

Sustainability is the key to any development works. In the operation phase, hydro power is the most sustainable form of energy. However construction activities for the same power station are usually far from being green. The popular myth is that construction activity converts green into grey. Despite this popular myth, construction of a hydro power project in Nepal has made the project area greener than earlier during the construction phase itself. Choice of construction technology, appropriate level of environmental impact assessment, monitoring of environmental parameters along side the construction progress followed by mitigation at the right time; launching community development programmes side by side, having environmental specification in contractual documents and self-reliance to fulfill environmental obligations by contractors itself are the key factors in the environmental management within the construction activities. The main conclusions in the paper is the need to change the way to think about the project constraints

Characterization of nanoparticles released during construction of photocatalytic pavements using engineered nanoparticles

International Nuclear Information System (INIS)

Dylla, Heather; Hassan, Marwa M.

2012-01-01

With the increasing use of titanium dioxide (TiO 2 ) nanoparticles in self-cleaning materials such as photocatalytic concrete pavements, the release of nanoparticles into the environment is inevitable. Nanoparticle concentration, particle size, surface area, elemental composition, and surface morphology are pertinent to determine the associated risks. In this study, the potential of exposure to synthetic nanoparticles released during construction activities for application of photocatalytic pavements was measured during laboratory-simulated construction activities of photocatalytic mortar overlays and in an actual field application of photocatalytic spray coat. A scanning mobility particle sizer system measured the size distribution of nanoparticles released during laboratory and field activities. Since incidental nanoparticles are released during construction activities, nanoparticle emissions were compared to those from similar activities without nano-TiO 2 . Nanoparticle counts and size distribution suggest that synthetic nanoparticles are released during application of photocatalytic pavements. In order to identify the nanoparticle source, nanoparticles were also collected for offline characterization using transmission electron microscopy. However, positive identification of synthetic nanoparticles was not possible due to difficulties in obtaining high-resolution images. As a result, further research is recommended to identify nanoparticle composition and sources.

ConStruct: Improved construction of RNA consensus structures

Directory of Open Access Journals (Sweden)

Steger Gerhard

2008-04-01

Full Text Available Abstract Background Aligning homologous non-coding RNAs (ncRNAs correctly in terms of sequence and structure is an unresolved problem, due to both mathematical complexity and imperfect scoring functions. High quality alignments, however, are a prerequisite for most consensus structure prediction approaches, homology searches, and tools for phylogeny inference. Automatically created ncRNA alignments often need manual corrections, yet this manual refinement is tedious and error-prone. Results We present an extended version of CONSTRUCT, a semi-automatic, graphical tool suitable for creating RNA alignments correct in terms of both consensus sequence and consensus structure. To this purpose CONSTRUCT combines sequence alignment, thermodynamic data and various measures of covariation. One important feature is that the user is guided during the alignment correction step by a consensus dotplot, which displays all thermodynamically optimal base pairs and the corresponding covariation. Once the initial alignment is corrected, optimal and suboptimal secondary structures as well as tertiary interaction can be predicted. We demonstrate CONSTRUCT's ability to guide the user in correcting an initial alignment, and show an example for optimal secondary consensus structure prediction on very hard to align SECIS elements. Moreover we use CONSTRUCT to predict tertiary interactions from sequences of the internal ribosome entry site of CrP-like viruses. In addition we show that alignments specifically designed for benchmarking can be easily be optimized using CONSTRUCT, although they share very little sequence identity. Conclusion CONSTRUCT's graphical interface allows for an easy alignment correction based on and guided by predicted and known structural constraints. It combines several algorithms for prediction of secondary consensus structure and even tertiary interactions. The CONSTRUCT package can be downloaded from the URL listed in the Availability and

Construction and operation costs of constructed wetlands treating wastewater.

Science.gov (United States)

Gkika, Dimitra; Gikas, Georgios D; Tsihrintzis, Vassilios A

2014-01-01

Design data from nine constructed wetlands (CW) facilities of various capacities (population equivalent (PE)) are used to estimate construction and operation costs, and then to derive empirical equations relating the required facility land area and the construction cost to PE. In addition, comparisons between the costs of CW facilities based on various alternative construction materials, i.e., reinforced concrete and earth structures (covered with either high density polyethylene or clay), are presented in relation to the required area. The results show that earth structures are economically advantageous. The derived equations can be used for providing a preliminary cost estimate of CW facilities for domestic wastewater treatment.

Perspectives of construction robots

Science.gov (United States)

Stepanov, M. A.; Gridchin, A. M.

2018-03-01

This article is an overview of construction robots features, based on formulating the list of requirements for different types of construction robots in relation to different types of construction works.. It describes a variety of construction works and ways to construct new or to adapt existing robot designs for a construction process. Also, it shows the prospects of AI-controlled machines, implementation of automated control systems and networks on construction sites. In the end, different ways to develop and improve, including ecological aspect, the construction process through the wide robotization, creating of data communication networks and, in perspective, establishing of fully AI-controlled construction complex are formulated.

Shortening of construction period of nuclear power plant. Activities of construction industry on construction period shortening

International Nuclear Information System (INIS)

Kamata, Hirofumi

2011-01-01

Total construction period could be shorten by prefabricating structures efficiently in another yard and reducing working hours on site, which would reduce work at height or congestion work and also upgrade safety at work. Construction period shortening would surely reduce expenses during work and advance operation start of electric utilities. Construction of reactor building, turbine building, water intake and drainage canal was performed on a relatively large scale and a big share of whole schedule. This article summarized basic technologies to shorten construction period for reactor building/turbine building and water intake and drainage canal. Advanced methods of reactor building/turbine building; (1) modularization of equipment and skeleton, (2) utilization of concrete mold, reinforcing bar and steel frame, (3) precedent steel frame method and (4) steel plate reinforced concrete (SC) method, were outlined and their application examples were shown to reduce work on site and improve work efficiency. As for water intake and drainage canal construction, (1) precast concrete method, (2) SC method and (3) steel plate shell method were described with application examples. Construction procedures and problems using mega block method for water intake and drainage canal were also introduced. (T. Tanaka)

Constructed Wetlands

Science.gov (United States)

these systems can improve water quality, engineers and scientists construct systems that replicate the functions of natural wetlands. Constructed wetlands are treatment systems that use natural processes

Exposure to firearm: impact on psychological health in central India

Directory of Open Access Journals (Sweden)

S Saxena

2013-12-01

Full Text Available Background: The issue of firearm exposure is one of the widespread prevailing problems in today’s world but at the same time it is least talked about. Its psychological effects vary from person to person and the degree of consequences has many variables to measure. The firearm exposure not only implies to an individual but also the whole gambit of social structures around him. Methods: A cross-section study on 505 subjects of the age group 20-45 years from central India was done, where routine social order depends upon massive armament of the citizen. We studied the relationship between socio-demographic variables and firearm exposure with variables of psychological domain of the WHOQOL-BREF. Multivariate logistic regression model was constructed to find the correlates among them. The objectives of the study were to study the attributes of socio demographic variables, which affects psychological health and exposure to firearms in the study population and to see the impact of exposure to firearms on psychological health. Results: Higher education is associated positively with psychological health. The desire to have a gun (OR=1.988, CI 1.306-3.024, p-value <.005 is showing a significant association with low psychological domain score of QOL. Being married (OR=.556, CI .344-.901, p-value <.005 and not Living in a joint family (OR=.581, CI .379-.891, p-value <.005 is associated with poor psychological health. Conclusions: Higher education is the best predictor for good psychological health. Semiskilled workers (farmers and laborers should be prioritized as high risk groups for adverse life situations. Firearm exposures have a significant impact on psychological health. So, policies directed at rural population should target at specific needs of community. 

Exposure to firearm: impact on psychological health in central India

Directory of Open Access Journals (Sweden)

S Saxena

2013-12-01

Full Text Available Background: The issue of firearm exposure is one of the widespread prevailing problems in today’s world but at the same time it is least talked about. Its psychological effects vary from person to person and the degree of consequences has many variables to measure. The firearm exposure not only implies to an individual but also the whole gambit of social structures around him. Methods: A cross-section study on 505 subjects of the age group 20-45 years from central India was done, where routine social order depends upon massive armament of the citizen. We studied the relationship between socio-demographic variables and firearm exposure with variables of psychological domain of the WHOQOL-BREF. Multivariate logistic regression model was constructed to find the correlates among them. The objectives of the study were to study the attributes of socio demographic variables, which affects psychological health and exposure to firearms in the study population and to see the impact of exposure to firearms on psychological health. Results: Higher education is associated positively with psychological health. The desire to have a gun (OR=1.988, CI 1.306-3.024, p-value <.005 is showing a significant association with low psychological domain score of QOL. Being married (OR=.556, CI .344-.901, p-value <.005 and not Living in a joint family (OR=.581, CI .379-.891, p-value <.005 is associated with poor psychological health. Conclusions: Higher education is the best predictor for good psychological health. Semiskilled workers (farmers and laborers should be prioritized as high risk groups for adverse life situations. Firearm exposures have a significant impact on psychological health. So, policies directed at rural population should target at specific needs of community.  

Exposure levels and determinants of inhalable dust exposure in bakeries.

Science.gov (United States)

Burstyn, I; Teschke, K; Kennedy, S M

1997-12-01

The study's objectives were to measure full-shift exposure to inhalable dust in bakeries and define the determinants of full-shift exposure. Inhalable dust was measured gravimetrically. Ninety-six bakery workers, employed in seven different bakeries, participated in the study. Two side-by-side full-shift inhalable dust samples were obtained from each study participant on a single occasion. Samples were collected on 18 days selected at random. During the entire sampling period, bakers were observed and information on 14 different tasks was recorded at 15 min intervals. Other production characteristics were also recorded for each sampling day. These task and production variables were used in statistical modelling to identify significant predictors of exposure. The mean full-shift inhalable dust exposure was 8.2 mg/m3 (range: 0.1-110 mg/m3). A regression model explained 79% of the variability in exposure. The model indicated that tasks such as weighing, pouring and operating dough-brakers and reversible sheeters increased the exposure, while packing, catching and decorating decreased the exposure. Bread and bun production lines were associated with increased full-shift inhalable dust exposure, while cake production and substitution of dusting with the use of divider oil were associated with decreased exposure. Production tasks and characteristics are strong predictors of personal full-shift exposures to flour dust among bakers; these can be altered to reduce exposure levels.

Management of climatic heat stress risk in construction: a review of practices, methodologies, and future research.

Science.gov (United States)

Rowlinson, Steve; Yunyanjia, Andrea; Li, Baizhan; Chuanjingju, Carrie

2014-05-01

Climatic heat stress leads to accidents on construction sites brought about by a range of human factors emanating from heat induced illness, and fatigue leading to impaired capability, physical and mental. It is an occupational characteristic of construction work in many climates and the authors take the approach of re-engineering the whole safety management system rather than focusing on incremental improvement, which is current management practice in the construction industry. From a scientific viewpoint, climatic heat stress is determined by six key factors: (1) air temperature, (2) humidity, (3) radiant heat, and (4) wind speed indicating the environment, (5) metabolic heat generated by physical activities, and (6) "clothing effect" that moderates the heat exchange between the body and the environment. By making use of existing heat stress indices and heat stress management processes, heat stress risk on construction sites can be managed in three ways: (1) control of environmental heat stress exposure through use of an action-triggering threshold system, (2) control of continuous work time (CWT, referred by maximum allowable exposure duration) with mandatory work-rest regimens, and (3) enabling self-paced working through empowerment of employees. Existing heat stress practices and methodologies are critically reviewed and the authors propose a three-level methodology for an action-triggering, localized, simplified threshold system to facilitate effective decisions by frontline supervisors. The authors point out the need for "regional based" heat stress management practices that reflect unique climatic conditions, working practices and acclimatization propensity by local workers indifferent geographic regions. The authors set out the case for regional, rather than international, standards that account for this uniqueness and which are derived from site-based rather than laboratory-based research. Copyright © 2013 Elsevier Ltd. All rights reserved.

Potential and Benefits of Building Information Modeling (BIM) During Pre-Construction, Construction and Post Construction Stage

OpenAIRE

Aw Nien Wei; Md Azree Othuman Mydin

2017-01-01

The construction industry is the main economic support for all countries around the world in which continually adapting to meet competitive challenges around the global market. Nevertheless, the construction project is becoming much more complex and difficult to manage. This is because the construction project involves a large number of stakeholder, for example, the consultant companies, architects, engineers, building surveyors and quantity surveyors. The technology current...

FFTF constructibility

International Nuclear Information System (INIS)

Weber, S.A.; Hulbert, D.I.

1975-01-01

The influence of the design criteria on the constructibility of the Fast Flux Test Facility is described. Specifically, the effects of requirements due to maintenance accessibility, inerting of cells, seismicity, codes, and standards are addressed. The design and construction techniques developed to minimize the impact of the design criteria on cost and schedule are presented with particular emphasis on the cleanliness and humidity controls imposed during construction of the sodium systems. (U.S.)

Exploring Global Exposure Factors Resources for Use in Consumer Exposure Assessments

Science.gov (United States)

Zaleski, Rosemary T.; Egeghy, Peter P.; Hakkinen, Pertti J.

2016-01-01

This publication serves as a global comprehensive resource for readers seeking exposure factor data and information relevant to consumer exposure assessment. It describes the types of information that may be found in various official surveys and online and published resources. The relevant exposure factors cover a broad range, including general exposure factor data found in published compendia and databases and resources about specific exposure factors, such as human activity patterns and housing information. Also included are resources on exposure factors related to specific types of consumer products and the associated patterns of use, such as for a type of personal care product or a type of children’s toy. Further, a section on using exposure factors for designing representative exposure scenarios is included, along with a look into the future for databases and other exposure science developments relevant for consumer exposure assessment. PMID:27455300

A framework for widespread replication of a highly spatially resolved childhood lead exposure risk model.

Science.gov (United States)

Kim, Dohyeong; Galeano, M Alicia Overstreet; Hull, Andrew; Miranda, Marie Lynn

2008-12-01

Preventive approaches to childhood lead poisoning are critical for addressing this longstanding environmental health concern. Moreover, increasing evidence of cognitive effects of blood lead levels system-based childhood lead exposure risk models, especially if executed at highly resolved spatial scales, can help identify children most at risk of lead exposure, as well as prioritize and direct housing and health-protective intervention programs. However, developing highly resolved spatial data requires labor-and time-intensive geocoding and analytical processes. In this study we evaluated the benefit of increased effort spent geocoding in terms of improved performance of lead exposure risk models. We constructed three childhood lead exposure risk models based on established methods but using different levels of geocoded data from blood lead surveillance, county tax assessors, and the 2000 U.S. Census for 18 counties in North Carolina. We used the results to predict lead exposure risk levels mapped at the individual tax parcel unit. The models performed well enough to identify high-risk areas for targeted intervention, even with a relatively low level of effort on geocoding. This study demonstrates the feasibility of widespread replication of highly spatially resolved childhood lead exposure risk models. The models guide resource-constrained local health and housing departments and community-based organizations on how best to expend their efforts in preventing and mitigating lead exposure risk in their communities.

Detecting exposure to environmental organic toxins in individual cells: towards development of a micro-fabricated device

International Nuclear Information System (INIS)

Holman, Hoi-Ying N.; Zhang, Miqin; Goth-Goldstein, Regine; Martin, Michael C.; Russell, Marion; McKinney, Wayne R.; Ferrari, Mauro; Hunter-Cevera, Jennie C.

1999-01-01

A new method is being developed to quickly screen for the human exposure potential to polycyclic aromatic hydrocarbons (PAHs) and organochlorines (OCs). The development involves two key elements: identifying suitable signals that represent intracellular changes that are specific to PAH and OC exposure, and constructing a device to guide the biological cell growth so that signals from individual cells are consistent and reproducible. We are completing the identification of suitable signals by using synchrotron radiation-based (SR) Fourier-transform infrared (FTIR) spectromicroscopy in the mid-infrared region (4000-400 cm-1). Distinct changes have been observed in the IR spectra after treatment of human cells in culture medium with PAHs and OCs. The potential use of this method for detecting exposure to PAHs and OCs has been tested and compared to a reverse transcription polymerase chain reaction (RT-PCR) assay that quantifies increased expression of the CYP1A1 gene in response to exposure to PAHs or OCs

Improved inhalation technology for setting safe exposure levels for workplace chemicals

Science.gov (United States)

Stuart, Bruce O.

1993-01-01

Threshold Limit Values recommended as allowable air concentrations of a chemical in the workplace are often based upon a no-observable-effect-level (NOEL) determined by experimental inhalation studies using rodents. A 'safe level' for human exposure must then be estimated by the use of generalized safety factors in attempts to extrapolate from experimental rodents to man. The recent development of chemical-specific physiologically-based toxicokinetics makes use of measured physiological, biochemical, and metabolic parameters to construct a validated model that is able to 'scale-up' rodent response data to predict the behavior of the chemical in man. This procedure is made possible by recent advances in personal computer software and the emergence of appropriate biological data, and provides an analytical tool for much more reliable risk evaluation and airborne chemical exposure level setting for humans.

Effect of thermal exposure on the residual stress relaxation in a hardened cylindrical sample under creep conditions

Science.gov (United States)

Radchenko, V. P.; Saushkin, M. N.; Tsvetkov, V. V.

2016-05-01

This paper describes the effect of thermal exposure (high-temperature exposure) ( T = 675°C) on the residual creep stress relaxation in a surface hardened solid cylindrical sample made of ZhS6UVI alloy. The analysis is carried out with the use of experimental data for residual stresses after micro-shot peening and exposures to temperatures equal to T = 675°C during 50, 150, and 300 h. The paper presents the technique for solving the boundary-value creep problem for the hardened cylindrical sample with the initial stress-strain state under the condition of thermal exposure. The uniaxial experimental creep curves obtained under constant stresses of 500, 530, 570, and 600 MPa are used to construct the models describing the primary and secondary stages of creep. The calculated and experimental data for the longitudinal (axial) tensor components of residual stresses are compared, and their satisfactory agreement is determined.

Genome-wide significant risk associations for mucinous ovarian carcinoma

DEFF Research Database (Denmark)

Kelemen, Linda E; Lawrenson, Kate; Tyrer, Jonathan

2015-01-01

at 2q13 in colorectal tumors (P = 0.03, FDR = 0.09). Chromosome conformation capture analysis identified interactions between the HOXD9 promoter and risk-associated SNPs at 2q31.1. Overexpressing HOXD9 in MOC cells augmented the neoplastic phenotype. These findings provide the first evidence for MOC...... susceptibility variants and insights into the underlying biology of the disease....

Buried Craters of Utopia

Science.gov (United States)

2003-01-01

MGS MOC Release No. MOC2-365, 19 May 2003Beneath the northern plains of Mars are numerous buried meteor impact craters. One of the most heavily-cratered areas, although buried, occurs in Utopia Planitia, as shown in this Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image. The history of Mars is complex; impact craters provide a tool by which to understand some of that history. In this case, a very ancient, cratered surface was thinly-buried by younger material that is not cratered at all. This area is near 48.1oN, 228.2oW; less than 180 km (112 mi) west of the Viking 2 lander site. Sunlight illuminates the scene from the lower left.

Linear source approximation scheme for method of characteristics

International Nuclear Information System (INIS)

Tang Chuntao

2011-01-01

Method of characteristics (MOC) for solving neutron transport equation based on unstructured mesh has already become one of the fundamental methods for lattice calculation of nuclear design code system. However, most of MOC codes are developed with flat source approximation called step characteristics (SC) scheme, which is another basic assumption for MOC. A linear source (LS) characteristics scheme and its corresponding modification for negative source distribution were proposed. The OECD/NEA C5G7-MOX 2D benchmark and a self-defined BWR mini-core problem were employed to validate the new LS module of PEACH code. Numerical results indicate that the proposed LS scheme employs less memory and computational time compared with SC scheme at the same accuracy. (authors)

Analysis of real-time mixture cytotoxicity data following repeated exposure using BK/TD models.

Science.gov (United States)

Teng, S; Tebby, C; Barcellini-Couget, S; De Sousa, G; Brochot, C; Rahmani, R; Pery, A R R

2016-08-15

Cosmetic products generally consist of multiple ingredients. Thus, cosmetic risk assessment has to deal with mixture toxicity on a long-term scale which means it has to be assessed in the context of repeated exposure. Given that animal testing has been banned for cosmetics risk assessment, in vitro assays allowing long-term repeated exposure and adapted for in vitro - in vivo extrapolation need to be developed. However, most in vitro tests only assess short-term effects and consider static endpoints which hinder extrapolation to realistic human exposure scenarios where concentration in target organs is varies over time. Thanks to impedance metrics, real-time cell viability monitoring for repeated exposure has become possible. We recently constructed biokinetic/toxicodynamic models (BK/TD) to analyze such data (Teng et al., 2015) for three hepatotoxic cosmetic ingredients: coumarin, isoeugenol and benzophenone-2. In the present study, we aim to apply these models to analyze the dynamics of mixture impedance data using the concepts of concentration addition and independent action. Metabolic interactions between the mixture components were investigated, characterized and implemented in the models, as they impacted the actual cellular exposure. Indeed, cellular metabolism following mixture exposure induced a quick disappearance of the compounds from the exposure system. We showed that isoeugenol substantially decreased the metabolism of benzophenone-2, reducing the disappearance of this compound and enhancing its in vitro toxicity. Apart from this metabolic interaction, no mixtures showed any interaction, and all binary mixtures were successfully modeled by at least one model based on exposure to the individual compounds. Copyright © 2016 Elsevier Inc. All rights reserved.

Assessment of exposure risk from hidden fungal growth by measurements of air change rates in construction cavities and living areas

DEFF Research Database (Denmark)

Knudsen, Sofie M; Møller, Eva B.; Gunnarsen, Lars Bo

2017-01-01

The transfer of particulate and gaseous pollution from hidden fungi growing on non-visible surfaces within the building envelope to occupied rooms is limited by the separating structure. Yet, growth, even in sealed construction cavities, is known to cause annoying smells and other more adverse...... health symptoms among the building occupants. This study analyses limitations of air change rate measurements in inaccessible construction cavities as well as analyses of the air exchange between living areas and accessible cavities such as crawl spaces and attics. It was necessary to invent a field...

Electric shocks at work in Europe: development of a job exposure matrix.

Science.gov (United States)

Huss, Anke; Vermeulen, Roel; Bowman, Joseph D; Kheifets, Leeka; Kromhout, Hans

2013-04-01

Electric shocks have been suggested as a potential risk factor for neurological disease, in particular for amyotrophic lateral sclerosis. While actual exposure to shocks is difficult to measure, occurrence and variation of electric injuries could serve as an exposure proxy. We assessed risk of electric injury, using occupational accident registries across Europe to develop an electric shock job-exposure-matrix (JEM). Injury data were obtained from five European countries, and the number of workers per occupation and country from EUROSTAT was compiled at a 3-digit International Standard Classification of Occupations 1988 level. We pooled accident rates across countries with a random effects model and categorised jobs into low, medium and high risk based on the 75th and 90th percentile. We next compared our JEM to a JEM that classified extremely low frequency magnetic field exposure of jobs into low, medium and high. Of 116 job codes, occupations with high potential for electric injury exposure were electrical and electronic equipment mechanics and fitters, building frame workers and finishers, machinery mechanics and fitters, metal moulders and welders, assemblers, mining and construction labourers, metal-products machine operators, ships' decks crews and power production and related plant operators. Agreement between the electrical injury and magnetic field JEM was 67.2%. Our JEM classifies occupational titles according to risk of electric injury as a proxy for occurrence of electric shocks. In addition to assessing risk potentially arising from electric shocks, this JEM might contribute to disentangling risks from electric injury from those of extremely low frequency magnetic field exposure.

Construction of full-scale shaft seals in crystalline rock

International Nuclear Information System (INIS)

Martino, J.B.; Dixon, D.A.; Onagi, D.; Kim, C-S; Holowick, B.

2011-01-01

The Underground Research Laboratory (URL) was constructed to investigate concepts related to geological disposal of used nuclear fuel. This involved investigating the rock mass by undertaking in situ experiments using a multi disciplinary technical approach. The decision was made in 2003 to close the URL. Part of the closure process involved installing seals in the access and ventilation shafts at locations where they intersected an ancient thrust fault (Fracture Zone 2 -- FZ2). FZ2 is an active hydraulic pathway in the Lac du Bonnet batholith and this feature is the dominating structural and hydrogeological feature at the URL site. Above FZ2 the groundwater has a low salinity and is dominated by surface-related processes. With increasing depth in the batholith, surface-related effects decrease and the salinity of the groundwater increases to 90 g/L total dissolved solids. The decision to install the seals was made as part of the due diligence for the site closure to ensure that the saline groundwater located at depth down strike and below the thrust fault would not enter the closed underground openings and mix with less saline shallow groundwater. The construction of each seal involved the installation of a heavily reinforced low alkalinity concrete component keyed into the surrounding rock. The concrete supported and restrained a central clay-sand component, which was capped by an unreinforced concrete component. The clay-sand component spans the exposure of the thrust fault in each shaft. This paper describes the construction of the main shaft seal and the ventilation shaft seal. The construction of the shaft seals at the URL was part of the Nuclear Legacy Liabilities Program (NLLP) being funded by Natural Resources Canada (NRCan). (author)

Construction of full-scale shaft seals in crystalline rock

Energy Technology Data Exchange (ETDEWEB)

Martino, J.B.; Dixon, D.A.; Onagi, D.; Kim, C-S; Holowick, B. [Atomic Energy of Canada Limited, Pinawa, MB (Canada)

2011-07-01

The Underground Research Laboratory (URL) was constructed to investigate concepts related to geological disposal of used nuclear fuel. This involved investigating the rock mass by undertaking in situ experiments using a multi disciplinary technical approach. The decision was made in 2003 to close the URL. Part of the closure process involved installing seals in the access and ventilation shafts at locations where they intersected an ancient thrust fault (Fracture Zone 2 -- FZ2). FZ2 is an active hydraulic pathway in the Lac du Bonnet batholith and this feature is the dominating structural and hydrogeological feature at the URL site. Above FZ2 the groundwater has a low salinity and is dominated by surface-related processes. With increasing depth in the batholith, surface-related effects decrease and the salinity of the groundwater increases to 90 g/L total dissolved solids. The decision to install the seals was made as part of the due diligence for the site closure to ensure that the saline groundwater located at depth down strike and below the thrust fault would not enter the closed underground openings and mix with less saline shallow groundwater. The construction of each seal involved the installation of a heavily reinforced low alkalinity concrete component keyed into the surrounding rock. The concrete supported and restrained a central clay-sand component, which was capped by an unreinforced concrete component. The clay-sand component spans the exposure of the thrust fault in each shaft. This paper describes the construction of the main shaft seal and the ventilation shaft seal. The construction of the shaft seals at the URL was part of the Nuclear Legacy Liabilities Program (NLLP) being funded by Natural Resources Canada (NRCan). (author)

Prenatal mercury exposure and infant birth weight in the Norwegian Mother and Child Cohort Study.

Science.gov (United States)

Vejrup, Kristine; Brantsæter, Anne Lise; Knutsen, Helle K; Magnus, Per; Alexander, Jan; Kvalem, Helen E; Meltzer, Helle M; Haugen, Margaretha

2014-09-01

To examine the association between calculated maternal dietary exposure to Hg in pregnancy and infant birth weight in the Norwegian Mother and Child Cohort Study (MoBa). Exposure was calculated with use of a constructed database of Hg in food items and reported dietary intake during pregnancy. Multivariable regression models were used to explore the association between maternal Hg exposure and infant birth weight, and to model associations with small-for-gestational-age offspring. The study is based on data from MoBa. The study sample consisted of 62 941 women who answered a validated FFQ which covered the habitual diet during the first five months of pregnancy. Median exposure to Hg was 0·15 μg/kg body weight per week and the contribution from seafood intake was 88 % of total Hg exposure. Women in the highest quintile compared with the lowest quintile of Hg exposure delivered offspring with 34 g lower birth weight (95 % CI -46 g, -22 g) and had an increased risk of giving birth to small-for-gestational-age offspring, adjusted OR = 1·19 (95 % CI 1·08, 1·30). Although seafood intake was positively associated with increased birth weight, stratified analyses showed negative associations between Hg exposure and birth weight within strata of seafood intake. Although seafood intake in pregnancy is positively associated with birth weight, Hg exposure is negatively associated with birth weight. Seafood consumption during pregnancy should not be avoided, but clarification is needed to identify at what level of Hg exposure this risk might exceed the benefits of seafood.

Analysis of real-time mixture cytotoxicity data following repeated exposure using BK/TD models

International Nuclear Information System (INIS)

Teng, S.; Tebby, C.; Barcellini-Couget, S.; De Sousa, G.; Brochot, C.; Rahmani, R.; Pery, A.R.R.

2016-01-01

Cosmetic products generally consist of multiple ingredients. Thus, cosmetic risk assessment has to deal with mixture toxicity on a long-term scale which means it has to be assessed in the context of repeated exposure. Given that animal testing has been banned for cosmetics risk assessment, in vitro assays allowing long-term repeated exposure and adapted for in vitro – in vivo extrapolation need to be developed. However, most in vitro tests only assess short-term effects and consider static endpoints which hinder extrapolation to realistic human exposure scenarios where concentration in target organs is varies over time. Thanks to impedance metrics, real-time cell viability monitoring for repeated exposure has become possible. We recently constructed biokinetic/toxicodynamic models (BK/TD) to analyze such data (Teng et al., 2015) for three hepatotoxic cosmetic ingredients: coumarin, isoeugenol and benzophenone-2. In the present study, we aim to apply these models to analyze the dynamics of mixture impedance data using the concepts of concentration addition and independent action. Metabolic interactions between the mixture components were investigated, characterized and implemented in the models, as they impacted the actual cellular exposure. Indeed, cellular metabolism following mixture exposure induced a quick disappearance of the compounds from the exposure system. We showed that isoeugenol substantially decreased the metabolism of benzophenone-2, reducing the disappearance of this compound and enhancing its in vitro toxicity. Apart from this metabolic interaction, no mixtures showed any interaction, and all binary mixtures were successfully modeled by at least one model based on exposure to the individual compounds. - Highlights: • We could predict cell response over repeated exposure to mixtures of cosmetics. • Compounds acted independently on the cells. • Metabolic interactions impacted exposure concentrations to the compounds.

Analysis of real-time mixture cytotoxicity data following repeated exposure using BK/TD models

Energy Technology Data Exchange (ETDEWEB)

Teng, S.; Tebby, C. [Models for Toxicology and Ecotoxicology Unit, INERIS, Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Barcellini-Couget, S. [ODESIA Neosciences, Sophia Antipolis, 400 route des chappes, 06903 Sophia Antipolis (France); De Sousa, G. [INRA, ToxAlim, 400 route des Chappes, BP, 167 06903 Sophia Antipolis, Cedex (France); Brochot, C. [Models for Toxicology and Ecotoxicology Unit, INERIS, Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Rahmani, R. [INRA, ToxAlim, 400 route des Chappes, BP, 167 06903 Sophia Antipolis, Cedex (France); Pery, A.R.R., E-mail: alexandre.pery@agroparistech.fr [AgroParisTech, UMR 1402 INRA-AgroParisTech Ecosys, 78850 Thiverval Grignon (France); INRA, UMR 1402 INRA-AgroParisTech Ecosys, 78850 Thiverval Grignon (France)

2016-08-15

Cosmetic products generally consist of multiple ingredients. Thus, cosmetic risk assessment has to deal with mixture toxicity on a long-term scale which means it has to be assessed in the context of repeated exposure. Given that animal testing has been banned for cosmetics risk assessment, in vitro assays allowing long-term repeated exposure and adapted for in vitro – in vivo extrapolation need to be developed. However, most in vitro tests only assess short-term effects and consider static endpoints which hinder extrapolation to realistic human exposure scenarios where concentration in target organs is varies over time. Thanks to impedance metrics, real-time cell viability monitoring for repeated exposure has become possible. We recently constructed biokinetic/toxicodynamic models (BK/TD) to analyze such data (Teng et al., 2015) for three hepatotoxic cosmetic ingredients: coumarin, isoeugenol and benzophenone-2. In the present study, we aim to apply these models to analyze the dynamics of mixture impedance data using the concepts of concentration addition and independent action. Metabolic interactions between the mixture components were investigated, characterized and implemented in the models, as they impacted the actual cellular exposure. Indeed, cellular metabolism following mixture exposure induced a quick disappearance of the compounds from the exposure system. We showed that isoeugenol substantially decreased the metabolism of benzophenone-2, reducing the disappearance of this compound and enhancing its in vitro toxicity. Apart from this metabolic interaction, no mixtures showed any interaction, and all binary mixtures were successfully modeled by at least one model based on exposure to the individual compounds. - Highlights: • We could predict cell response over repeated exposure to mixtures of cosmetics. • Compounds acted independently on the cells. • Metabolic interactions impacted exposure concentrations to the compounds.

MPACT Theory Manual, Version 2.2.0

Energy Technology Data Exchange (ETDEWEB)

Downar, Thomas [Univ. of Michigan, Ann Arbor, MI (United States); Collins, Benjamin S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gehin, Jess C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Godfrey, Andrew T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jabaay, Daniel [Univ. of Michigan, Ann Arbor, MI (United States); Kelley, Blake W. [Univ. of Michigan, Ann Arbor, MI (United States); Clarno, Kevin T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kim, Kang [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kochunas, Brendan [Univ. of Michigan, Ann Arbor, MI (United States); Larsen, Edward W. [Univ. of Michigan, Ann Arbor, MI (United States); Liu, Yuxuan [Univ. of Michigan, Ann Arbor, MI (United States); Liu, Zhouyu [Univ. of Michigan, Ann Arbor, MI (United States); Martin, William R. [Univ. of Michigan, Ann Arbor, MI (United States); Palmtag, Scott [Core Physics, Inc., Cary, NC (United States); Rose, Michael [Univ. of Michigan, Ann Arbor, MI (United States); Saller, Thomas [Univ. of Michigan, Ann Arbor, MI (United States); Stimpson, Shane [Univ. of Michigan, Ann Arbor, MI (United States); Trahan, Travis [Univ. of Michigan, Ann Arbor, MI (United States); Wang, J. W. [Univ. of Michigan, Ann Arbor, MI (United States); Wieselquist, William A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Young, Mitchell [Univ. of Michigan, Ann Arbor, MI (United States); Zhu, Ang [Univ. of Michigan, Ann Arbor, MI (United States)

2016-06-09

This theory manual describes the three-dimensional (3-D) whole-core, pin-resolved transport calculation methodology employed in the MPACT code. To provide sub-pin level power distributions with sufficient accuracy, MPACT employs the method of characteristics (MOC) solutions in the framework of a 3-D coarse mesh finite difference (CMFD) formulation. MPACT provides a 3D MOC solution, but also a 2D/1D solution in which the 2D planar solution is provided by MOC and the axial coupling is resolved by one-dimensional (1-D) lower order (diffusion or P3) solutions. In Chapter 2 of the manual, the MOC methodology is described for calculating the regional angular and scalar fluxes from the Boltzmann transport equation. In Chapter 3, the 2D/1D methodology is described, together with the description of the CMFD iteration process involving dynamic homogenization and solution of the multigroup CMFD linear system. A description of the MPACT depletion algorithm is given in Chapter 4, followed by a discussion of the subgroup and ESSM resonance processing methods in Chapter 5. The final Chapter 6 describes a simplified thermal hydraulics model in MPACT.

The effect of the presence and characteristics of an outlying group on exposure-outcome associations.

Science.gov (United States)

Coenen, Pieter; Mathiassen, Svend Erik; Kingma, Idsart; Boot, Cécile R L; Bongers, Paulien M; van Dieën, Jaap H

2015-01-01

Physical exposures (eg, lifting or bending) are believed to be risk factors for low-back pain (LBP), but the literature is inconsistent. Exposure and LBP prevalence differ considerably between occupations, and exposure-outcome associations could be severely modified by the presence of particular occupational groups. We aimed to investigate the influence of such outlying groups on the properties of associations between exposure and LBP. Lifting and trunk flexion were observed for 371 of 1131 workers within 19 groups. LBP was obtained from all workers during three follow-up years. Both exposure variables were associated with LBP (Pexposures and LBP prevalence substantially affected the exposure-outcome association in the total population. In order to further examine this phenomenon, we assessed, by simulation, the influence of realistic sizes (n=4, 8, 16, 32, 64, 128), mean exposures (e=2000, 3000, 4000 lifts and e=30, 40, 50% trunk flexion time) and LBP prevalences (p=70, 80, 90, 100%) of the outlying group on the strength and certainty of the eventual relationship between exposure and LBP. For each combination of n, e and p, 3000 virtual studies were constructed, including the simulated group together with the other 18 original groups from the parent data-set. Average odds ratios (OR), 95% confidence limits, and power (Pexposure. The size and characteristics of a single group with high exposure and outcome prevalence can strongly influence both the OR point estimate and the likelihood of obtaining significant exposure-outcome associations in studies of large populations. These findings can guide interpretations of prior epidemiological studies and support informed design of future studies.

Fast exposure time decision in multi-exposure HDR imaging

Science.gov (United States)

Piao, Yongjie; Jin, Guang

2012-10-01

Currently available imaging and display system exists the problem of insufficient dynamic range, and the system cannot restore all the information for an high dynamic range (HDR) scene. The number of low dynamic range(LDR) image samples and fastness of exposure time decision impacts the real-time performance of the system dramatically. In order to realize a real-time HDR video acquisition system, this paper proposed a fast and robust method for exposure time selection in under and over exposure area which is based on system response function. The method utilized the monotony of the imaging system. According to this characteristic the exposure time is adjusted to an initial value to make the median value of the image equals to the middle value of the system output range; then adjust the exposure time to make the pixel value on two sides of histogram be the middle value of the system output range. Thus three low dynamic range images are acquired. Experiments show that the proposed method for adjusting the initial exposure time can converge in two iterations which is more fast and stable than average gray control method. As to the exposure time adjusting in under and over exposed area, the proposed method can use the dynamic range of the system more efficiently than fixed exposure time method.

Influence of radiation exposure rate on somatic mutation frequency and loss of reproductive integrity in tradescantia stamen hairs

International Nuclear Information System (INIS)

Ichikawa, S.; Nauman, C.H.; Sparrow, A.H.; Takahashi, C.S.

1978-01-01

Inflorescences of Tradescantia clone 02 (2n=12), hetero- or hemi-zygous for flower color, were exposed to a series of γ-ray exposures at two different exposure rates, 29.3 R/min and 0.026-0.52 R/min. Pink mutation-response curves, and survival curves based on reproductive integrity, were constructed for each of the exposure rates. Loss of reproductive integrity was also assessed at high (256 R/min) and low (0.52-4.17 R/min) γ-ray exposure rates in T. blossfeldiana (2n=72). All observations were made on stamen hairs. The higher exposure rate was 1.3-1.7 times more effective in inducing pink mutations in clone 02. A greater efficiency of the higher exposure rate was also found for both taxa at the loss of reproductive integrity endpoint. The D 0 values obtained at the higher exposure rates, 154 R for clone 02 and 720 R for T. blossfeldiana, were significantly lower than the corresponding values of 270 R and 1880 R obtained at the lower exposure rates. These D 0 's differ by factors of 1.75 and 2.61 for clone 02 and T. blossfeldiana, respectively. D 0 's for the two taxa were found to be inversely correlated with their interphase chromosome volumes. (Auth.)

Leadership Quality for Malaysia Construction Leader to Steer a Success Construction Project

OpenAIRE

Ngah Nasaruddin Nur Ain; Abdul Rahman Ismail

2016-01-01

Issues that dominate the construction industry for the long time such as time overrun, cost overrun, quality of construction and also safety during the construction process are difficult to resolve because of several factors involved which amongst them are leadership quality in the industry. Solving these issues can make the industry more sustainable in nature. This paper presents the need of leadership quality among construction parties involved to steer a construction project successfully. ...

Heterotic string construction

International Nuclear Information System (INIS)