WorldWideScience

Sample records for confirmatory measurement experiences

  1. Experience with confirmatory measurements at the Savannah River Plant

    International Nuclear Information System (INIS)

    Deason, P.T.; Cadieux, J.R.; Denard, C.D.

    1985-01-01

    Confirmatory measurements are performed on all category I and II plutonium shipments to the Savannah River Plant (SRP). The primary technique employed has been neutron coincidence counting using three instruments; two slab counters, and a well counter. These measurements have provided the required safeguards features to support the physical security measures already in place for inter-site shipments of special nuclear material (SNM). Similar confirmatory measurements have also been performed on a variety of scrap mixed-oxide materials stored at SRP for later processing. The data handling and results for several categories of material will be examined in addition to planned uses of the Rocky Flats Plant (RFP)/SRP Confirmatory Measurements Counter (CMC). 2 refs., 4 figs

  2. Safeguards uses of confirmatory measurements

    International Nuclear Information System (INIS)

    Coulter, C.A.

    1985-01-01

    An analysis is made of the role of shipper and receiver measurements in safeguarding special nuclear materials (SNM) transferred from one facility to another, with emphasis on the case where the receiver requires an analytical accounting measurement of the transferred SNM and does not need the material for process purposes at the time of receipt. Seven possible diversion periods are considered, ranging from the interval between the shipper's final accounting measurement on the material and the time it is placed in the shipper's vault, through the actual transport of the material between facilities, to the time the material is removed from the receiver's vault and placed in the process. The detection power of various combinations of six possible shipper/receiver measurements for these diversion opportunities is then evaluated; the measurements considered include the shipper's and receiver's accounting measurements, the latter at two possible times, and various nondestructive assay (NDA) confirmatory measurements. It is concluded that all safeguards measurement objectives can be met by a combination of a shipper's accounting measurement at the time the material is removed from the process, an appropriate shipper's NDA confirmatory measurement either immediately after canning or immediately before shipping, an equivalent receiver's NDA confirmatory measurement immediately after the material is received, and a receiver's accounting measurement when the material is placed in the process. Furthermore, it is found that a receiver's analytical accounting measurement immediately after receipt when the material is not yet required for process has dubious safeguards value

  3. Confirmatory measurements of special nuclear materials

    International Nuclear Information System (INIS)

    Belew, W.L.; Williams, T.L.

    1985-01-01

    Confirmatory measurements have been considered to be interim measures until accountability measurements could be performed. When the objectives of the measurements are defined and, measurement techniques selected to attain these objectives, confirmatory type measurements can significantly increase the effectiveness of the safeguards system and in some cases may be preferred to accountability measurements for safeguards purposes. The use of fingerprint type confirmatory measurements can provide highly reliable data to ensure no diversion of SNM has occurred. These measurements can be made quickly to provide rapid assessments of SNM in shipping or storage containers. The use of fingerprint type measurements at SRP on enriched uranium shipments was shown to provide assurance at a high confidence level that no diversion of SNM could have occurred. The objective of the 10 day DOE requirement for accountability measurements is to provide a rapid assessment of SNM quantity for safeguards purposes. In cases where confirmatory or fingerprint measurements have provided assurance that no diversion has occurred, the safeguards system is not compromised by delay of the accountability measurements. The accountability measurements can then be performed for inventory purposes without undue time constraints in a more cost effective and efficient manner. 1 fig

  4. Argumentation in the Chemistry Laboratory: Inquiry and Confirmatory Experiments

    Science.gov (United States)

    Katchevich, Dvora; Hofstein, Avi; Mamlok-Naaman, Rachel

    2013-02-01

    One of the goals of science education is to provide students with the ability to construct arguments—reasoning and thinking critically in a scientific context. Over the years, many studies have been conducted on constructing arguments in science teaching, but only few of them have dealt with studying argumentation in the laboratory. Our research focuses on the process in which students construct arguments in the chemistry laboratory while conducting various types of experiments. It was found that inquiry experiments have the potential to serve as an effective platform for formulating arguments, owing to the features of this learning environment. The discourse during inquiry-type experiments was found to be rich in arguments, whereas that during confirmatory-type experiments was found to be sparse in arguments. The arguments, which were developed during the discourse of an open inquiry experiment, focus on the hypothesis-building stage, analysis of the results, and drawing appropriate conclusions.

  5. A confirmatory measurement technique for highly enriched uranium

    International Nuclear Information System (INIS)

    Sprinkle, J.K. Jr.

    1987-07-01

    This report describes a confirmatory measurement technique for measuring uranium items in their shipping containers. The measurement consists of a weight verification and the detection of three gamma rays. The weight can be determined very precisely, thus it severely constrains the options of the diverter who might want to imitate the gamma signal with a bogus item. The 185.7-keV gamma ray originates from 235 U, the 1001 keV originates from a daughter of 238 U, and the 2614 keV originates from a daughter of 232 U. These three gamma rays exhibit widely different attenuation properties, they correlate with enrichment and total uranium mass, and they rigorously discriminate against a likely diversion scenario (low-enriched uranium substitution). These four measured quantities, when combined, provide a signature that is very difficult to counterfeit

  6. A CONFIRMATORY APPROACH TO MEASURING RISKS IN SUPPLY CHAINS

    Directory of Open Access Journals (Sweden)

    Constangioara Alexandru

    2014-07-01

    Our proposed research methodology reveals the advantages of a confirmatory factor analysis over an exploratory principal component analysis in the context of risks management in supply chains. Moreover, as Sodhi and Tang (2012 reveals, more than half of papers in existing SCRM literature are either conceptual or qualitative empirical (case studies. Our proposed quantitative methodology contributes to reducing the above mentioned gap, providing results that can be used for statistical inferences and for enhancing the efficiency of the managerial decisional process.

  7. A confirmatory measurement technique for HEU [highly enriched uranium

    International Nuclear Information System (INIS)

    Sprinkle, J.K. Jr.; Goldman, A.; Russo, P.A.; Stovall, L.; Brumfield, T.L.; Gunn, C.S.; Watson, D.R.; Beedgen, R.

    1987-01-01

    Precise measurements of the special nuclear material (SNM) in an item can be used to confirm that the item has not been tampered with. These measurements do not require a highly accurate calibration, but they should be based on an attribute that is unique to the SNM. We describe an instrument that performs gamma-ray measurements at three energies: 185.7 keV, 1001 keV, and 2614 keV. This instrument collects data for 200 s from shipping containers (208-l barrels). These measurements help to distinguish the issue of material control - Has any material been diverted? - from the issue of measurement control - Is there a measurement bias?

  8. Confirmatory Factor Analysis of the Structure of Statistics Anxiety Measure: An Examination of Four Alternative Models

    Directory of Open Access Journals (Sweden)

    Hossein Bevrani, PhD

    2011-09-01

    Full Text Available Objective: The aim of this study is to explore the confirmatory factor analysis results of the Persian adaptation of Statistics Anxiety Measure (SAM, proposed by Earp.Method: The validity and reliability assessments of the scale were performed on 298 college students chosen randomly from Tabriz University in Iran. Confirmatory factor analysis (CFA was carried out to determine the factor structures of the Persian adaptation of SAM.Results: As expected, the second order model provided a better fit to the data than the three alternative models. Conclusions: Hence, SAM provides an equally valid measure for use among college students. The study both expands and adds support to the existing body of math anxiety literature.

  9. Healthcare professionals' and parents' experiences of the confirmatory testing period: a qualitative study of the UK expanded newborn screening pilot.

    Science.gov (United States)

    Moody, Louise; Atkinson, Lou; Kehal, Isher; Bonham, James R

    2017-05-08

    With further expansion of the number of conditions for which newborn screening can be undertaken, it is timely to consider the impact of positive screening results and the confirmatory testing period on the families involved. This study was undertaken as part of a larger programme of work to evaluate the Expanded Newborn Screening (ENBS) programme in the United Kingdom (UK). It was aimed to determine the views and experiences of healthcare professionals (HCPs) and parents on communication and interaction during the period of confirmatory testing following a positive screening result. Semi-structured interviews were undertaken with parents of children who had received a positive ENBS result and HCPs who had been involved with the diagnosis and support of parents. Ten parents and 11 healthcare professionals took part in the in-depth interviews. Questions considered the journey from the positive screening result through confirmatory testing to a confirmed diagnosis and the communication and interaction between the parents and HCPs that they had been experienced. Key themes were identified through thematic analysis. The results point to a number of elements within the path through confirmatory testing that are difficult for parents and could be further developed to improve the experience. These include the way in which the results are communicated to parents, rapid turnaround of results, offering a consistent approach, exploring interventions to support family relationships and reviewing the workload and scheduling implications for healthcare professionals. As technology enables newborn screening of a larger number of conditions, there is an increasing need to consider and mediate the potentially negative effects on families. The findings from this study point to a number of elements within the path through confirmatory testing that are difficult for parents and could be further developed to benefit the family experience.

  10. A confirmatory factor analytic study of a self-leadership measure in South Africa

    Directory of Open Access Journals (Sweden)

    Bright Mahembe

    2013-07-01

    Full Text Available Orientation: Self-leadership is considered to be essential for effective individual functioning in occupational and academic contexts. The revised self-leadership questionnaire (RSLQ is widely utilised for measuring self-leadership, but its psychometric properties have not been established on a South African sample. By implication, important questions also exist about the theoretical structure of self-leadership in the South African context. Research purpose: The research aim of this study was to investigate the reliability and factorial validity of the revised self-leadership questionnaire on a South African sample. In doing so, the results of the research would also provide valuable insights into the latent factor structure of the self-leadership construct. Motivation for the study: On a practical level, the research sought internal validity evidence for the use of the RSLQ in the South African context. On a theoretical level, questions remain about the best conceptual representation of self-leadership as a construct. Research design, approach and method: The revised self-leadership questionnaire was administered to a non-probability sample of 375 South African young adults. The first and second-order factor structure underlying contemporary models of self-leadership using confirmatory factor analytic techniques was tested. Main findings: Results showed that the RSLQ measured self-leadership with suitable reliability and internal validity. All eight subscales had high internal consistency coefficients. Confirmatory factor analysis (CFA of the first and second-order models conclusively demonstrated good factorial validity. Practical/managerial implications: The study found that the RSLQ has good measurement properties for a South African context. Academics, practitioners and managers are urged to use the measure in its present form for applications such as leadership development and promoting self-management. Contribution/value-addition: The

  11. A confirmatory factor analytical study of a servant leadership measure in South Africa

    Directory of Open Access Journals (Sweden)

    Bright Mahembe

    2013-09-01

    Research purpose: The goal of the study was to validate the Servant Leadership Questionnaire(SLQ, which Barbuto and Wheeler developed, on a South African sample. Motivation for the study: The literature is replete with evidence of the role of follower focused leadership practices in improving team effectiveness, employee engagement and organisational success. We need to complement these efforts with psychometrically sound measuring instruments. Research design, approach and method: The authors drew a convenience sample of 288 school teachers from schools in the Western Cape Province of South Africa. They used the SLQ that Barbuto and Wheeler developed to measure servant leadership. Main findings: The authors found high levels of reliability for the sub-scales of the latent variables. They found good fit with the data for the measurement model of the five latent servant leadership dimensions (altruistic calling, persuasive mapping, emotional healing, wisdom and organisational stewardship through confirmatory factor analyses (CFA. They obtained reasonable fit for the first- and second-order servant leadership CFA. The authors concluded that the SLQ shows reasonable fit. Practical/managerial implications: The SLQ showed evidence of reliability and construct validity. It can contribute to the scientific selection and development of education leaders in South African schools. Contribution/value add: Servant leadership incorporates a service ethic that fosters participatory management, teacher development and team building. The department of education should increase team effectiveness in schools by selecting and developing servant leadership.

  12. Confirmatory Factor Analysis of a Questionnaire Measure of Managerial Stigma Towards Employee Depression.

    Science.gov (United States)

    Martin, Angela J; Giallo, Rebecca

    2016-12-01

    Managers' attitudes play a key role in how organizations respond to employees with depression. We examine the measurement properties of a questionnaire designed to assess managerial stigma towards employees with depression. Using data from a sample of 469 Australian managers representing a wide range of industries and work settings, we conducted a confirmatory factor analysis to assess three proposed subscales representing affective, cognitive and behavioural forms of stigma. Results were equivocal indicating acceptable fit for two-factor (affective and cognitive + behavioural), three-factor (affective, cognitive and behavioural) and higher order models. Failure to demonstrate the discriminant validity of the cognitive and behavioural dimensions, even though they are theoretically distinct, suggests that further work on the scale is warranted. These results provide an extension to the psychometric profile of this measure (exploratory factor analysis; Martin, ). Development of strategies to operationalize this construct will benefit occupational health research and practice, particularly in interventions that aim to reduce the stigma of mental health issues in the workplace or where managers' attitudes are a key mechanism in intervention efficacy. We encourage future research on this measure pertaining in particular to further enhancing all aspects of its construct validity. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  13. Intrapersonal and interpersonal dimensions of cancer perception: a confirmatory factor analysis of the cancer experience and efficacy scale (CEES).

    Science.gov (United States)

    Hou, Wai Kai

    2010-05-01

    Sociocultural factors influence psychological adjustment to cancer in Asian patients in two major ways: prioritization of relationships over individual orientations and belief in the efficacy of interpersonal cooperation. We derived and validated among Chinese colorectal cancer (CRC) patients an instrument assessing cancer perceptions to enable the study of the sociocultural processes. Qualitative interviews (n = 16) derived 15 items addressing interpersonal experience in Chinese CRC patients' adjustment. These 15 items and 18 corresponding self-referent items were administered to 166 Chinese CRC survivors and subjected to exploratory factor analysis (EFA) to establish the initial scale structure and reliability. The final 29 items, together with other psychometric measures, were administered to a second cohort of 215 CRC patients and subjected to confirmatory factor analysis (CFA). EFA (63.35% of the total variance) extracted six factors: personal strain, socioeconomic strain, emotional strain, personal efficacy, collective efficacy, and proxy efficacy. CFA confirmed the psychometric structure [chi (2)(df) = 702.91(368); Comparative Fit Index = 0.95; Nonnormed Fit Index = 0.94; Incremental Fit Index = 0.95; standardized root mean square residual = 0.08] of the six factors by using a model with two latent factors: experience and efficacy. All subscales were reliable (alpha = 0.76-0.92). Appropriate correlations with adjustment outcomes (symptom distress, psychological morbidity, and subjective well-being), optimistic personalities, and social relational quality indicated its convergent and divergent validity. Known group comparisons (i.e., age, active treatment, and colostomy) showed its clinical utility. The cancer experience and efficacy scale is a valid multidimensional instrument for assessing intrapersonal and interpersonal dimensions of cancer experience in Asian patients, potentiating existing patient-reported outcome measures.

  14. A confirmatory research approach to the measurement of EMI/RFI in commercial nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W. [Oak Ridge National Lab., TN (United States)

    1995-04-01

    The Oak Ridge National Laboratory (ORNL) is conducting confirmatory research on the measurement of electromagnetic/radio frequency interference (EMI/RFI) in nuclear power plants. While it makes a good beginning, the currently available research data are not sufficient to characterize the EMI/RFI environment of the typical nuclear plant. Data collected over several weeks at each of several observation points are required to meet this need. To collect the required data, several approaches are examined, the most promising of which is the relatively new technology of application specific spectral receivers. While several spectral receiver designs have been described in the literature, none is well suited for nuclear power plant EMI/RFI surveys. This paper describes the development of two receivers specifically designed for nuclear power plant EMI/RFI surveys. One receiver surveys electric fields between 5 MHz and 8 GHz, while the other surveys magnetic fields between 305 Hz and 5 MHz. The results of field tests at TVA`s Bull Run Fossil Plant are reported.

  15. A confirmatory research approach to the measurement of EMI/RFI in commercial nuclear power plants

    International Nuclear Information System (INIS)

    Kercel, S.W.

    1995-01-01

    The Oak Ridge National Laboratory (ORNL) is conducting confirmatory research on the measurement of electromagnetic/radio frequency interference (EMI/RFI) in nuclear power plants while it makes a good beginning, the currently available research data are not sufficient to characterize the EMI/RFI environment of the typical nuclear plant. Data collected over several weeks at each of several observation points are required to meet this need. To collect the required data, several approaches are examined, the most promising of which is the relatively new technology of application specific spectral receivers. While several spectral receiver designs have been described in the literature, none is well suited for nuclear power plant EMI/RFI surveys. This paper describes the development of two receivers specifically designed for nuclear power plant EMI/RFI surveys. One receiver surveys electric fields between 5 MHz and 8 GHz, while the other surveys magnetic fields between 305 Hz and 5 MHz. The results of field tests at TVA's Bull Run Fossil Plant are reported

  16. Measuring child maltreatment using multi-informant survey data: a higher-order confirmatory factor analysis

    Directory of Open Access Journals (Sweden)

    Giovanni A. Salum

    2016-03-01

    Full Text Available Objective To investigate the validity and reliability of a multi-informant approach to measuring child maltreatment (CM comprising seven questions assessing CM administered to children and their parents in a large community sample. Methods Our sample comprised 2,512 children aged 6 to 12 years and their parents. Child maltreatment (CM was assessed with three questions answered by the children and four answered by their parents, covering physical abuse, physical neglect, emotional abuse and sexual abuse. Confirmatory factor analysis was used to compare the fit indices of different models. Convergent and divergent validity were tested using parent-report and teacher-report scores on the Strengths and Difficulties Questionnaire. Discriminant validity was investigated using the Development and Well-Being Assessment to divide subjects into five diagnostic groups: typically developing controls (n = 1,880, fear disorders (n = 108, distress disorders (n = 76, attention deficit hyperactivity disorder (n = 143 and oppositional defiant disorder/conduct disorder (n = 56. Results A higher-order model with one higher-order factor (child maltreatment encompassing two lower-order factors (child report and parent report exhibited the best fit to the data and this model's reliability results were acceptable. As expected, child maltreatment was positively associated with measures of psychopathology and negatively associated with prosocial measures. All diagnostic category groups had higher levels of overall child maltreatment than typically developing children. Conclusions We found evidence for the validity and reliability of this brief measure of child maltreatment using data from a large survey combining information from parents and their children.

  17. Measuring child maltreatment using multi-informant survey data: a higher-order confirmatory factor analysis.

    Science.gov (United States)

    Salum, Giovanni A; DeSousa, Diogo Araújo; Manfro, Gisele Gus; Pan, Pedro Mario; Gadelha, Ary; Brietzke, Elisa; Miguel, Eurípedes Constantino; Mari, Jair J; do Rosário, Maria Conceição; Grassi-Oliveira, Rodrigo

    2016-01-01

    To investigate the validity and reliability of a multi-informant approach to measuring child maltreatment (CM) comprising seven questions assessing CM administered to children and their parents in a large community sample. Our sample comprised 2,512 children aged 6 to 12 years and their parents. Child maltreatment (CM) was assessed with three questions answered by the children and four answered by their parents, covering physical abuse, physical neglect, emotional abuse and sexual abuse. Confirmatory factor analysis was used to compare the fit indices of different models. Convergent and divergent validity were tested using parent-report and teacher-report scores on the Strengths and Difficulties Questionnaire. Discriminant validity was investigated using the Development and Well-Being Assessment to divide subjects into five diagnostic groups: typically developing controls (n = 1,880), fear disorders (n = 108), distress disorders (n = 76), attention deficit hyperactivity disorder (n = 143) and oppositional defiant disorder/conduct disorder (n = 56). A higher-order model with one higher-order factor (child maltreatment) encompassing two lower-order factors (child report and parent report) exhibited the best fit to the data and this model's reliability results were acceptable. As expected, child maltreatment was positively associated with measures of psychopathology and negatively associated with prosocial measures. All diagnostic category groups had higher levels of overall child maltreatment than typically developing children. We found evidence for the validity and reliability of this brief measure of child maltreatment using data from a large survey combining information from parents and their children.

  18. IDENTIFICATION OF MEASUREMENT ITEMS OF DESIGN REQUIREMENTS FOR LEAN AND AGILE SUPPLY CHAIN-CONFIRMATORY FACTOR ANALYSIS

    Directory of Open Access Journals (Sweden)

    D.Venkata Ramana

    2013-06-01

    Full Text Available This study examines the consistency approaches by confirmatory factor analysis that determines the construct validity, convergent validity, construct reliability and internal consistency of the items of strategic design requirements. The design requirements includes use of information technology, sourcing procedures, new product development, flexible manufacturing functions and demand management supply chain net work design, management, commitment and inventory management policies among manufacturers of volatile and unforeseeable products in Andhraadesh, India. This study suggested that the seven factor model with 20 items of the leagile supply chain design requirements had a good fit. Further, the study showed a val id and reliable measurement to identify critical items among the design requirements of leagile supply chains.

  19. Measurement invariance of the strength of motivation for medical school: a multi-group confirmatory factor analysis.

    Science.gov (United States)

    An, M; Kusurkar, R A; Li, L; Xiao, Y; Zheng, C; Hu, J; Chen, M

    2017-07-11

    The Strength of Motivation for Medical School-Revised (SMMS-R) questionnaire measures students' motivation for studying medicine. It includes three subscales: 'willingness to sacrifice', 'readiness to start', and 'persistence'. Measurement invariance is a prerequisite for group comparisons. The objectives of this study were to verify the factorial structure of the SMMS-R questionnaire and to investigate it's measurement invariance. A total of 989 medical students were approached, 930 cases were kept for data analysis. Factorial structure of and measurement invariance of the SMMS-R were tested using single and multiple group confirmatory factor analyses with Mplus. Trational Cronbach's α along with McDonald's ω and glb were used to measure internal consistency for each subscale. Internal consistency for subscales and the full instrument were within the acceptable range. A 3-factor structure of the Chinese version of the SMMS-R was supported. Full configural, metric and partial scalar invariance were obtained. The SMMS-R showed measurement invariance across gender and two independent samples. So it can be used for group and cross-cultural comparisons.

  20. Measuring implementation behaviour of menu guidelines in the childcare setting: confirmatory factor analysis of a theoretical domains framework questionnaire (TDFQ).

    Science.gov (United States)

    Seward, Kirsty; Wolfenden, Luke; Wiggers, John; Finch, Meghan; Wyse, Rebecca; Oldmeadow, Christopher; Presseau, Justin; Clinton-McHarg, Tara; Yoong, Sze Lin

    2017-04-04

    While there are number of frameworks which focus on supporting the implementation of evidence based approaches, few psychometrically valid measures exist to assess constructs within these frameworks. This study aimed to develop and psychometrically assess a scale measuring each domain of the Theoretical Domains Framework for use in assessing the implementation of dietary guidelines within a non-health care setting (childcare services). A 75 item 14-domain Theoretical Domains Framework Questionnaire (TDFQ) was developed and administered via telephone interview to 202 centre based childcare service cooks who had a role in planning the service menu. Confirmatory factor analysis (CFA) was undertaken to assess the reliability, discriminant validity and goodness of fit of the 14-domain theoretical domain framework measure. For the CFA, five iterative processes of adjustment were undertaken where 14 items were removed, resulting in a final measure consisting of 14 domains and 61 items. For the final measure: the Chi-Square goodness of fit statistic was 3447.19; the Standardized Root Mean Square Residual (SRMR) was 0.070; the Root Mean Square Error of Approximation (RMSEA) was 0.072; and the Comparative Fit Index (CFI) had a value of 0.78. While only one of the three indices support goodness of fit of the measurement model tested, a 14-domain model with 61 items showed good discriminant validity and internally consistent items. Future research should aim to assess the psychometric properties of the developed TDFQ in other community-based settings.

  1. Confirmatory measurements of UF6 using the neutron self-interrogation method

    International Nuclear Information System (INIS)

    Stewart, J.E.; Ensslin, N.; Menlove, H.O.; Cowder, L.R.; Polk, P.J.

    1985-01-01

    A passive neutron counting method has been developed for measurement of the 235 U mass in Model 5A cylinders of UF 6 . The unique neutronic properties of UF 6 containing highly enriched uranium (HEU) permit 235 U assay using only passive neutron counting. The sample effectively assays itself by self-interrogation. Shipped from enrichment plants and received at fuel fabrication and conversion facilities, 5A UF 6 cylinders hold up to approx.17 kg of 235 U each. Field measurements at the Portsmouth Gaseous Diffusion Plant (GDP) showed an average assay accuracy of 6.8% (1sigma) for 44 cylinders with enrichments from 6 to 98% and with a range of fill heights. Further measurements on 38 cylinders containing 97%-enriched material yielded an accuracy of 2.8% (1sigma). Typical counting times for these measurements were less than 5 min. An in-plant instrument for receipts confirmation measurements of 5A UF 6 cylinders has been developed for the Savannah River Plant. The Receipts Assay Monitor (RAM) is currently being tested and calibrated. It is designed to confirm declared fissile mass in all incoming 5A cylinders containing HEU in the form of UF 6 . One of the computer-controlled features is a removable cadmium liner for the sample cavity. The liner allows a sample fill-height correction, which significantly improves assay accuracy

  2. Validation of the Adolescent Concerns Measure (ACM): Evidence from Exploratory and Confirmatory Factor Analysis

    Science.gov (United States)

    Ang, Rebecca P.; Chong, Wan Har; Huan, Vivien S.; Yeo, Lay See

    2007-01-01

    This article reports the development and initial validation of scores obtained from the Adolescent Concerns Measure (ACM), a scale which assesses concerns of Asian adolescent students. In Study 1, findings from exploratory factor analysis using 619 adolescents suggested a 24-item scale with four correlated factors--Family Concerns (9 items), Peer…

  3. Validation of an instrument to measure tutor performance in promoting self-directed learning by using confirmatory factor analysis

    Directory of Open Access Journals (Sweden)

    Genoveva Amador Fierros

    Full Text Available Objective.This work sought to validate and propose an instrument to measure the performance of tutors in promoting self-directed learning in students involved in processes of problem-based learning. Methods. Confirmatory factor analysis (CFA was applied to validate the instrument composed of 60 items and six factors (self-assessment of learning gaps within the United Nations specific context: self-assessment, reflexion, critical thinking, administration of information, group skills, using a sample of 207 students from a total of 279, which comprise the student population of the Faculty of Nursing at Universidad de Colima in Mexico. (2007. Results. The CFA results demonstrated that the instrument is acceptable to measure performance of tutors in promoting self-directed learning, given that all the indicators, variances, covariances, and thresholds are statistically significant. Conclusion. The instrument permits obtaining students' opinions on how much professors contribute for them to develop each of the 60 skills described in the scale. Lastly, the results could report if professors are placing more emphasis in some areas than in other areas they should address during the problem-based learning (PBL process, or if definitely their actions are removed from the premises of PBL, information that will be useful for school management in decision making on the direction of teaching as a whole.

  4. Confirmatory factor analysis of the Feeding Emotions Scale. A measure of parent emotions in the context of feeding.

    Science.gov (United States)

    Frankel, Leslie; Fisher, Jennifer O; Power, Thomas G; Chen, Tzu-An; Cross, Matthew B; Hughes, Sheryl O

    2015-08-01

    Assessing parent affect is important because studies examining the parent-child dyad have shown that parent affect has a profound impact on parent-child interactions and related outcomes. Although some measures that assess general affect during daily lives exist, to date there are only few tools that assess parent affect in the context of feeding. The aim of this study was to develop an instrument to measure parent affect specific to the feeding context and determine its validity and reliability. A brief instrument consisting of 20 items was developed that specifically asks how parents feel during the feeding process. This brief instrument draws on the structure of a well-validated general affect measure. A total of 296 Hispanic and Black Head Start parents of preschoolers completed the Feeding Emotions Scale along with other parent-report measures as part of a larger study designed to better understand feeding interactions during the dinner meal. Confirmatory factor analysis supported a two-factor model with independent subscales of positive affect and negative affect (Cronbach's alphas of 0.85 and 0.84, respectively). Concurrent and convergent construct validity was evaluated by correlating the subscales of the Feeding Emotions Scale with positive emotionality and negative emotionality from the Differential Emotions Scale - a measure of general adult emotions. Concurrent and convergent criterion validity was evaluated by testing mean differences in affect across parent feeding styles using ANOVA. A significant difference was found across maternal weight status for positive feeding affect. The resulting validated measure can be used to assess parent affect in studies of feeding to better understand how interactions during feeding may impact the development of child eating behaviors and possibly weight status. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Measuring Women's Empowerment in Sub-Saharan Africa: Exploratory and Confirmatory Factor Analyses of the Demographic and Health Surveys

    Directory of Open Access Journals (Sweden)

    Ibitola O. Asaolu

    2018-06-01

    Full Text Available Background: Women's status and empowerment influence health, nutrition, and socioeconomic status of women and their children. Despite its benefits, however, research on women's empowerment in Sub-Saharan Africa (SSA is limited in scope and geography. Empowerment is variably defined and data for comparison across regions is often limited. The objective of the current study was to identify domains of empowerment from a widely available data source, Demographic and Health Surveys, across multiple regions in SSA.Methods: Demographic and Health Surveys from nineteen countries representing four African regions were used for the analysis. A total of 26 indicators across different dimensions (economic, socio-cultural, education, and health were used to characterize women's empowerment. Pooled data from all countries were randomly divided into two datasets—one for exploratory factor analysis (EFA and the other for Confirmatory Factor Analysis (CFA—to verify the factor structure hypothesized during EFA.Results: Four factors including attitudes toward violence, labor force participation, education, and access to healthcare were found to define women's empowerment in Central, Southern, and West Africa. However, in East Africa, only three factors were relevant: attitudes toward violence, access to healthcare ranking, and labor force participation. There was limited evidence to support household decision-making, life course, or legal status domains as components of women's empowerment.Conclusion: This foremost study advances scholarship on women's empowerment by providing a validated measure of women's empowerment for researchers and other stakeholders in health and development.

  6. Confirmatory Composite Analysis

    NARCIS (Netherlands)

    Schuberth, Florian; Henseler, Jörg; Dijkstra, Theo K.

    2018-01-01

    We introduce confirmatory composite analysis (CCA) as a structural equation modeling technique that aims at testing composite models. CCA entails the same steps as confirmatory factor analysis: model specification, model identification, model estimation, and model testing. Composite models are

  7. Assessing organizational implementation context in the education sector: confirmatory factor analysis of measures of implementation leadership, climate, and citizenship.

    Science.gov (United States)

    Lyon, Aaron R; Cook, Clayton R; Brown, Eric C; Locke, Jill; Davis, Chayna; Ehrhart, Mark; Aarons, Gregory A

    2018-01-08

    A substantial literature has established the role of the inner organizational setting on the implementation of evidence-based practices in community contexts, but very little of this research has been extended to the education sector, one of the most common settings for the delivery of mental and behavioral health services to children and adolescents. The current study examined the factor structure, psychometric properties, and interrelations of an adapted set of pragmatic organizational instruments measuring key aspects of the organizational implementation context in schools: (1) strategic implementation leadership, (2) strategic implementation climate, and (3) implementation citizenship behavior. The Implementation Leadership Scale (ILS), Implementation Climate Scale (ICS), and Implementation Citizenship Behavior Scale (ICBS) were adapted by a research team that included the original scale authors and experts in the implementation of evidence-based practices in schools. These instruments were then administered to a geographically representative sample (n = 196) of school-based mental/behavioral health consultants to assess the reliability and structural validity via a series of confirmatory factor analyses. Overall, the original factor structures for the ILS, ICS, and ICBS were confirmed in the current sample. The one exception was poor functioning of the Rewards subscale of the ICS, which was removed in the final ICS model. Correlations among the revised measures, evaluated as part of an overarching model of the organizational implementation context, indicated both unique and shared variance. The current analyses suggest strong applicability of the revised instruments to implementation of evidence-based mental and behavioral practices in the education sector. The one poorly functioning subscale (Rewards on the ICS) was attributed to typical educational policies that do not allow for individual financial incentives to personnel. Potential directions for

  8. Measuring the patient experience.

    Science.gov (United States)

    Lees, Carolyn

    2011-01-01

    This paper examines the complex issues of measuring the patient experience and evaluating the quality of health care. It discusses the use of surveys, patient stories and narrative methods of data collection in an attempt to define quality and how it should be measured. A recent Department of Health (DH) document insists that patients will be at the heart of decision making in the NHS by having greater control in informing strategic commissioning decisions (DH 2010c). The government aims to improve patient experience, enabling patients to rate services according to the quality of care they receive. This will be carried out using information generated by patients. This paper discusses the advantages and disadvantages of using surveys in gathering patient satisfaction data. It considers the value of surveys in measuring quality of care and appraises their usefulness in strengthening patients' collective voice. The paper investigates the use of another source of feedback - it examines the design of qualitative data collection methods as a means of gaining feedback from service users in encouraging providers of health care to be more responsive to their needs. Too often, patients are expected to fit the services, rather than services meeting the patients' needs. The most effective way of exploring and representing the patient's experience is by using a mixed-method approach. In other words, an integrated approach with the use of surveys and more narrative methods, such as patient stories, will effectively define quality and how it should be measured, ensuring that the focus is always on what matters most to patients.

  9. Measuring the User Experience

    Directory of Open Access Journals (Sweden)

    Harry B. Santoso

    2016-01-01

    Full Text Available The aim of the current study is to develop an adapted version of User Experience Questionnaire (UEQ and evaluate a learning management system. Although there is a growing interest on User Experience, there are still limited resources (i.e. measurement tools or questionnaires available to measure user experience of any products, especially learning management systems. Two hundreds and thirteen computer science students participated and completed the adapted version of UEQ. In the study, the researchers used a learning management system named Student Centered e-Learning Environment (SCELE. Several types of learning materials are posted in SCELE such as audio files, simulations, PowerPoint slides, multimedia contents, and webpage links. Most of the lecturers use discussion forums in their courses to encourage students to participate in active learning setting. Staff and lecturers sometimes post academic-related announcements on the SCELE homepage. Two hundred thirteen students enrolled in Computer Science program were invited to evaluate the SCELE. This study will benefit UX practitioners, HCI educators, program and center of learning resources administrators, and learning management system developers. Findings of the present study may also be valuable for universities and high schools which are using computer-based learning environments.

  10. Confirmatory factor analyses of the Feeding Emotion Scale: A measure of parent emotions in the context of feeding

    Science.gov (United States)

    Assessing parent affect is important because studies examining the parent–child dyad have shown that parent affect has a profound impact on parent–child interactions and related outcomes. Although some measures that assess general affect during daily lives exist, to date there are only few tools tha...

  11. A Confirmatory Analysis of the Organ Donation Readiness Index: Measuring the Potential for Organ Donations among African Americans

    Science.gov (United States)

    Rice, Christopher; Tamburlin, Judith

    2004-01-01

    The need for transplant exceeds the number of available organs. Antigen compatible organs are particularly scarce for African Americans because of their proportionately lower rate of donations. This study presents a measure of organ donation readiness. Examination of the factor structure and a test of weak invariance were conducted on…

  12. Male Role Norms Inventory-Short Form (MRNI-SF): development, confirmatory factor analytic investigation of structure, and measurement invariance across gender.

    Science.gov (United States)

    Levant, Ronald F; Hall, Rosalie J; Rankin, Thomas J

    2013-04-01

    The current study reports the development from the Male Role Norms Inventory-Revised (MRNI-R; Levant, Rankin, Williams, Hasan, & Smalley, 2010) of the 21-item MRNI-Short Form (MRNI-SF). Confirmatory factor analysis of MRNI-SF responses from a sample of 1,017 undergraduate participants (549 men, 468 women) indicated that the best fitting "bifactor" model incorporated the hypothesized 7-factor structure while explicitly modeling an additional, general traditional masculinity ideology factor. Specifically, each item-level indicator loaded on 2 factors: a general traditional masculinity ideology factor and a specific factor corresponding to 1 of the 7 hypothesized traditional masculinity ideology norms. The bifactor model was assessed for measurement invariance across gender groups, with findings of full configural invariance and partial metric invariance, such that factor loadings were equivalent across the gender groups for the 7 specific factors but not for the general traditional masculinity ideology factor. Theoretical explanations for this latter result include the potential that men's sense of self or identity may be engaged when responding to questions asking to what extent they agree or disagree with normative statements about their behavior, a possibility that could be investigated in future research by examining the associations of the general and specific factors with measures of masculine identity. Additional exploratory invariance analyses demonstrated latent mean differences between men and women on 4 of the 8 factors, and equivocal results for invariance of item intercepts, item uniquenesses, and factor variances-covariances.

  13. Measuring job satisfaction among healthcare staff in the United States: a confirmatory factor analysis of the Satisfaction of Employees in Health Care (SEHC) survey.

    Science.gov (United States)

    Chang, Eva; Cohen, Julia; Koethe, Benjamin; Smith, Kevin; Bir, Anupa

    2017-04-01

    To validate the Satisfaction of Employees in Health Care (SEHC) survey with multidisciplinary, healthcare staff in the United States (U.S.). A cross-sectional psychometric study using confirmatory factor analysis. The original three-factor model was tested and modified using half-samples. Models were assessed using goodness-of-fit measures. Scale reliability and validity were tested with Cronbach's α coefficient and correlation of total SEHC score with two global satisfaction items, respectively. We administered a web-based survey from January to May 2015 to healthcare staff participating in initiatives aimed at delivering better care and reducing costs. The overall response rate was 38% (N = 1089), and respondents were from 86 healthcare projects. A total of 928 respondents completed the SEHC survey in full and were used in this study. Model fit of 18 SEHC items and total SEHC score. The mean SEHC score was 77.6 (SD: 19.0). A one-factor model of job satisfaction had high loadings on all items, and demonstrated adequate model fit (second half-sample RMSEA: 0.069). The scale demonstrated high reliability (Cronbach's alpha = 0.942) and validity (r = 0.77 and 0.76, both P job satisfaction construct. The scale has adequate reliability and validity to recommend its use to assess satisfaction among multidisciplinary, U.S. healthcare staff. Our findings suggest that this survey is a good candidate for reduction to a short-form, and future research should validate this survey in other healthcare populations. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  14. Confirming the structure of negative beliefs about psychosis and bipolar disorder: A confirmatory factor analysis study of the Personal Beliefs about Experience Questionnaire and Personal Beliefs about Illness Questionnaire.

    Science.gov (United States)

    Taylor, Peter J; Pyle, Melissa; Schwannauer, Matthias; Hutton, Paul; Morrison, Anthony

    2015-11-01

    Negative beliefs about psychosis and other mental health difficulties may contribute to depression and distress in individuals with these experiences. The Personal Beliefs about Experience Questionnaire (PBEQ) and Personal Beliefs about Illness Questionnaire (PBIllQ) are two widely used measures of these beliefs. It is currently uncertain how the items on these measures map onto different underlying factors. This study therefore aimed to test the factor structure of these two measures. Confirmatory factor analysis (CFA) was used to test three alternative, pre-specified, factor structures for the PBIllQ and PBEQ in a sample of individuals diagnosed with bipolar disorder (n = 202) and a sample of individuals with experien-ces of psychosis (n = 362). Associations with depressive symptoms were also examined. A three-factor structure was supported for both measures, which included Negative Expectations/Appraisals (NEA), Internal Shame/Defectiveness (ISD) and External Shame (ES) factors. The NEA and ISD subscales also had consistent independent associations with depressive symptoms. The results suggest that the PBIllQ and PBEQ may capture three distinct sets of negative beliefs in individuals with psychosis or bipolar disorder and that these beliefs may have important consequences for subsequent difficulties in these populations such as depression. Both measures may be helpful in supporting assessment and formulation in clinical practice and in evaluating belief change in intervention trials. However, when used in these settings, the three subscales identified in this study may be the most valid way of calculating scores on these measures. Negative personal beliefs about the causes, meaning and consequences of psychosis and bipolar disorder are associated with greater distress and depression. Two related measures, the PBIllQ and PBEQ, have been developed to assess these beliefs. Our analyses suggest that scores on these questionnaires are best broken down into three

  15. Confirmatory research on the assessment of murderers.

    Science.gov (United States)

    Piotrowski, C

    1997-12-01

    Prior research, from the psychodynamically oriented literature, characterizes homicidal offenders as impulsive, vulnerable to stress, with difficulties in emotional control, particularly anger. In 1995 Coram reported Rorschach data from a sample of murderers which tentatively support earlier findings. This paper argues that confirmatory data from measures which objectively assess emotional states and behaviors could elucidate this issue.

  16. Construction and Initial Validation of the Multiracial Experiences Measure (MEM)

    Science.gov (United States)

    Yoo, Hyung Chol; Jackson, Kelly; Guevarra, Rudy P.; Miller, Matthew J.; Harrington, Blair

    2015-01-01

    This article describes the development and validation of the Multiracial Experiences Measure (MEM): a new measure that assesses uniquely racialized risks and resiliencies experienced by individuals of mixed racial heritage. Across two studies, there was evidence for the validation of the 25-item MEM with 5 subscales including Shifting Expressions, Perceived Racial Ambiguity, Creating Third Space, Multicultural Engagement, and Multiracial Discrimination. The 5-subscale structure of the MEM was supported by a combination of exploratory and confirmatory factor analyses. Evidence of criterion-related validity was partially supported with MEM subscales correlating with measures of racial diversity in one’s social network, color-blind racial attitude, psychological distress, and identity conflict. Evidence of discriminant validity was supported with MEM subscales not correlating with impression management. Implications for future research and suggestions for utilization of the MEM in clinical practice with multiracial adults are discussed. PMID:26460977

  17. Experience of executing security measures

    International Nuclear Information System (INIS)

    Nakano, Hiromasa

    1995-01-01

    Japan possesses many nuclear power stations and atomic energy research and development facilities, and obtained much experience of security measures such as the inspection by the government and IAEA, the technical development and so on in respective facilities. In this report, the activities of security measures in Japan are introduced, centering around the experience of Power Reactor and Nuclear Fuel Development Corporation. Japan ratified the nuclear nonproliferation treaty (NPT) in 1976, and concluded the agreement with IAEA in 1977. It is called security measures to technically confirm that nuclear substances are not used for nuclear weapons, and to find early and prevent the production of nuclear weapons. The security measures consist of the quantity management by the balance of nuclear substances are the inspection by the government and IAEA. The present state of security measures in centrifugal uranium enrichment plants, the fabrication factories of low enriched uranium fuel, nuclear reactors, fuel reprocessing plants, and plutonium fuel factories is reported. The amount of inspection works of the government was 1861 man-day/year in 1993. As the subjects related to security measures of hereafter, the quantity management by respective facilities, the technology of verifying the measurement by inspectors, the points of beginning and finishing security measures, the security measures of hereafter and the international cooperation are described. (K.I.)

  18. Remote Experiments in Resistor Measurement

    Directory of Open Access Journals (Sweden)

    Popescu Viorel

    2009-10-01

    Full Text Available The paper describes blended learningapproach to teaching resistor measurement. It is basedon “Learning by Doing” paradigm: interacticesimulation, laboratory plants, real experimentsaccessed by Web Publishing Tools under LabVIEW.Studying and experimenting access is opened for 24hours a day, 7 days a week under Moodle bookingsystem.

  19. Reactive Attachment Disorder and Disinhibited Social Engagement Disorder in School-Aged Foster Children--A Confirmatory Approach to Dimensional Measures.

    Science.gov (United States)

    Lehmann, Stine; Breivik, Kyrre; Heiervang, Einar R; Havik, Toril; Havik, Odd E

    2016-04-01

    This study aimed to investigate the factor structure and external correlates of the constructs Reactive Attachment Disorder (RAD) and Disinhibited Social Engagement Disorder (DSED) from the Diagnostic and Statistical Manual of Mental Disorders (DSM-5). The following were addressed: First, do our data support the DSM-5 conceptualization of RAD/DSED as two separate constructs? Second, are RAD and DSED distinct from other well-established dimensions of child psychopathology? Third, what are the external correlates of RAD/DSED in this sample? The study sample included 122 foster children aged 6-10 years. Foster parents completed the Strengths and Difficulties Questionnaire (SDQ), and the RAD/DSED-scale from the Developmental and Well-Being Assessment. Child protection caseworkers completed a questionnaire regarding exposure to maltreatment and placement history. Confirmatory factor analysis (CFA) of the RAD/DSED items identified a good fit for a model with a two-factor structure, which is congruent with the DSM-5 definition of RAD and DSED. A new CFA model, which included the RAD and DSED factors together with the four problem factors of the SDQ (emotional, conduct, hyperactivity-inattention, and peer problems), also demonstrated a good fit with our data. RAD and DSED were associated with the SDQ Impact scale and help seeking behavior. This was partly explained by the SDQ externalizing and peer problem subscales. Our findings lend support for the DSM-5 conceptualization of RAD and DSED as separate dimensions of child psychopathology. Thus, the assessment of RAD and DSED provides information beyond other mental health problems.

  20. When conflicts are good: nonconscious goal conflicts reduce confirmatory thinking.

    Science.gov (United States)

    Kleiman, Tali; Hassin, Ran R

    2013-09-01

    In this article, we argue that nonconscious goal conflicts are accompanied by a mindset that has wide-ranging implications for reasoning and thinking in content areas that are not part of the conflict itself. Specifically, we propose that nonconscious goal conflicts induce a mode of processing information that increases the likelihood of approaching an issue from opposing perspectives. This hypothesis is examined by investigating the effects of nonconscious goal conflicts on confirmatory thinking, that is, a way of thinking that narrowly focuses on confirmation rather than on broader examination of information. In 5 experiments, we show that nonconscious goal conflicts significantly reduce confirmatory hypothesis testing (Experiments 1 through 3) and anchoring (Experiments 4 and 5). We further show that these effects result from a goal conflict by rejecting explanations based on priming of semantic opposites, and priming of multiple goals that do not conflict (Experiments 2 and 3), and by examining decision times as a conflict process variable (Experiment 5). Using various probes, we show that these changes in confirmatory judgments are not accompanied by changes in conflict phenomenology. Together, these results suggest that nonconscious goal conflicts attenuate the robust confirmatory thinking strategy that characterizes human thinking in numerous domains.

  1. Quantifying the Qualitative: Measuring the Insight Experience

    Science.gov (United States)

    Jarman, Matthew S.

    2014-01-01

    No scales currently exist that measure variability in the insight experience. Two scales were created to measure two factors hypothesized to be key drivers of the insight experience: insight radicality (i.e., perceived deviation between previous and new problem representations) and restructuring experience (i.e., the subjective experience of the…

  2. An independent confirmatory factor analysis of the Wechsler Intelligence Scale for Children-fourth Edition (WISC-IV) integrated: what do the process approach subtests measure?

    Science.gov (United States)

    Benson, Nicholas; Hulac, David M; Bernstein, Joshua D

    2013-09-01

    The Wechsler intelligence scale for children--fourth edition (WISC-IV) Integrated contains the WISC-IV core and supplemental subtests along with process approach subtests designed to facilitate a process-oriented approach to score interpretation. The purpose of this study was to examine the extent to which WISC-IV Integrated subtests measure the constructs they are purported to measure. In addition to examining the measurement and scoring model provided in the manual, this study also tested hypotheses regarding Cattell-Horn-Carroll abilities that might be measured along with other substantive questions regarding the factor structure of the WISC-IV Integrated and the nature of abilities measured by process approach subtests. Results provide insight regarding the constructs measured by these subtests. Many subtests appear to be good to excellent measures of psychometric g (i.e., the general factor presumed to cause the positive correlation of mental tasks). Other abilities measured by subtests are described. For some subtests, the majority of variance is not accounted for by theoretical constructs included in the scoring model. Modifications made to remove demands such as memory recall and verbal expression were found to reduce construct-irrelevant variance. The WISC-IV Integrated subtests appear to measure similar constructs across ages 6-16, although strict factorial invariance was not supported.

  3. Development and Measurement through Confirmatory Factor Analysis of the Young Adult Social Behavior Scale (YASB): An Assessment of Relational Aggression in Adolescence and Young Adulthood

    Science.gov (United States)

    Crothers, Laura M.; Schreiber, James B.; Field, Julaine E.; Kolbert, Jered B.

    2009-01-01

    The Young Adult Social Behavior Scale was developed for the purpose of measuring self-reported relational and social aggression and behaviors of interpersonal maturity in adolescents and young adults (the sample included 629 university students; 66% female; 91.6% White). Despite previous research suggesting that relational and social aggression…

  4. Confirmatory Factor Analysis of Sizing Me Up: Validation of an Obesity-Specific Health-Related Quality of Life Measure in Latino Youth.

    Science.gov (United States)

    Tripicchio, Gina L; Borner, Kelsey B; Odar Stough, Cathleen; Poppert Cordts, Katrina; Dreyer Gillette, Meredith; Davis, Ann M

    2017-05-01

    This study aims to validate an obesity-specific health-related quality of life (HRQOL) measure, Sizing Me Up (SMU), in treatment-seeking Latino youth. Pediatric obesity has been associated with reduced HRQOL; therefore, valid measures are important for use in diverse populations that may be at increased risk for obesity and related comorbidities. Structural equation modeling tested the fit of the 5-subscale, 22-item SMU measure in Latino youth, 5-13 years of age, with obesity ( N = 204). Invariance testing was conducted to examine equivalence between Latino and non-Latino groups ( N = 250). SMU achieved acceptable fit in a Latino population [χ 2 = 428.33, df = 199, p Squared Error of Approximation = 0.072 (0.062-0.082), Comparative Fit Index = 0.915, Tucker-Lewis Index = 0.901, Weighted Root Mean Square Residual = 1.2230]. Additionally, factor structure and factor loadings were invariant across Latino and non-Latino groups, but thresholds were not invariant. SMU is a valid measure of obesity-specific HRQOL in treatment-seeking Latino youth with obesity. © The Author 2016. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  5. Defining and Measuring User Experience

    DEFF Research Database (Denmark)

    Stage, Jan

    2006-01-01

    User experience is being used to denote what a user goes through while using a computerized system. The concept has gained momentum as a means to distinguish new types of applications such as games and entertainment software from more traditional work-related applications. This paper focuses on t...

  6. A Confirmatory Factor Analysis of Reilly's Role Overload Scale

    Science.gov (United States)

    Thiagarajan, Palaniappan; Chakrabarty, Subhra; Taylor, Ronald D.

    2006-01-01

    In 1982, Reilly developed a 13-item scale to measure role overload. This scale has been widely used, but most studies did not assess the unidimensionality of the scale. Given the significance of unidimensionality in scale development, the current study reports a confirmatory factor analysis of the 13-item scale in two samples. Based on the…

  7. The direct measurement of free T4 in the eluate of dried blood. Usefulness as a confirmatory screening test for neonatal hypothyroidism

    International Nuclear Information System (INIS)

    Travert, G.; Lemonnier, F.; Fernandez, Y.

    1984-01-01

    In France neonatal screening for hypothyroidism is performed by mean of radioimmunoassay for TSH in dried blood spots, collected on the 5th day of life. In order to be able to get more data from the day 5 blood sample and thus confirm congenital hypothyroidism in all cases when elevated TSH levels have been found, we developed a simple radioimmunoassay for free T4 in eluates of dried blood spots on filter paper. We used reagents from the Amerlex FT4 RIA kit. The ready for use supplied anti-T4 antibody suspension and 125 I-T4 derivative solution are respectively 2-fold and 3-fold diluted in 0,154 M phosphate saline buffer-pH 7,4. Whole blood free T4 standards are prepared by adding serum standards in the kit to an equal volume of washed and packed red blood cells. Free T4 concentrations in these dried standards are expressed as picomoles per liter of whole blood. One blood spot 4.25 mm in diameter, equivalent to about 5-6 μl test blood or standard is incubated for 1 hour at room temperature in 500 μl of antibody suspension. The assay sensitivity (smallest detectable FT4 level) is 1.4 pmol.l -1 . Within assay and between assays coefficients of variation are respectively 9,5 and 13%. Free T4 levels measured in eluates of dried blood closely correlate (r=0,946) with plasma levels in the same subjects. Free T4 in 690 five day old neonates shows a non gaussian distribution, with a mean value: 13,6 pmol.l -1 and standard deviation: 4,3 (range 3,6-30 pmol.l -1 ). In 13 newborns with congenital hypothyroidism, day 5 free T4 levels were found within the range: 0 to 3,5 pmol.l -1 , and thus did not overlap with free T4 measured in age-matched euthyroid neonates [fr

  8. Blowing Flap Experiment: PIV Measurements

    Science.gov (United States)

    Hutcheson, Florence V.; Stead, Daniel J.; Bremmer, David M.

    2004-01-01

    PIV measurements of the flow in the region of a flap side edge are presented for several flap configurations. The test model is a NACA 63(sub 2)-215 Hicks Mod-B main element airfoil with a half-span Fowler flap. Air is blown from small slots located along the flap side edge on either the top, bottom or side surfaces. The test set up is described and flow measurements for a baseline and three blowing flap configurations are presented. The effects that the flap tip jets have on the structure of the flap side edge flow are discussed for each of the flap configurations tested. The results indicate that blowing air from a slot located along the top surface of the flap greatly weakened the top vortex system and pushed it further off the top surface. Blowing from the bottom flap surface kept the strong side vortex further outboard while blowing from the side surface only strengthened the flap vortex system. It is concluded that blowing from the top or bottom surfaces of the flap may lead to a reduction of flap side edge noise.

  9. Deriving a preference-based utility measure for cancer patients from the European Organisation for the Research and Treatment of Cancer's Quality of Life Questionnaire C30: a confirmatory versus exploratory approach

    Directory of Open Access Journals (Sweden)

    Costa DSJ

    2014-11-01

    Full Text Available Daniel SJ Costa,1 Neil K Aaronson,2 Peter M Fayers,3,4 Peter S Grimison,5,6 Monika Janda,7 Julie F Pallant,8 Donna Rowen,9 Galina Velikova,10 Rosalie Viney,11 Tracey A Young,9 Madeleine T King1On behalf of the MAUCa Consortium1Psycho-oncology Co-operative Research Group, University of Sydney, Sydney, NSW, Australia; 2Division of Psychosocial Research and Epidemiology, The Netherlands Cancer Institute, Amsterdam, the Netherlands; 3Institute of Applied Health Sciences, University of Aberdeen, Aberdeen, UK; 4Department of Cancer Research and Molecular Medicine, Norwegian University of Science and Technology, Trondheim, Norway; 5Chris O'Brien Lifehouse, 6Sydney Medical School, University of Sydney, Sydney, NSW, 7School of Public Health, Institute of Health and Biomedical Innovation, Queensland University of Technology, Brisbane, QLD, 8Rural Health Academic Centre, University of Melbourne, Shepparton, VIC, Australia; 9School of Health and Related Research, University of Sheffield, Sheffield; 10University of Leeds, St James's Institute of Oncology, Leeds, UK; 11Centre for Health Economics Research and Evaluation, University of Technology, Sydney, NSW, AustraliaBackground: Multi attribute utility instruments (MAUIs are preference-based measures that comprise a health state classification system (HSCS and a scoring algorithm that assigns a utility value to each health state in the HSCS. When developing a MAUI from a health-related quality of life (HRQOL questionnaire, first a HSCS must be derived. This typically involves selecting a subset of domains and items because HRQOL questionnaires typically have too many items to be amendable to the valuation task required to develop the scoring algorithm for a MAUI. Currently, exploratory factor analysis (EFA followed by Rasch analysis is recommended for deriving a MAUI from a HRQOL measure.Aim: To determine whether confirmatory factor analysis (CFA is more appropriate and efficient than EFA to derive a HSCS

  10. Next-generation confirmatory disease diagnostics

    Science.gov (United States)

    Lin, Robert; Gerver, Rachel; Karns, Kelly; Apori, Akwasi A.; Denisin, Aleksandra K.; Herr, Amy E.

    2014-06-01

    Microfluidic tools are advancing capabilities in screening diagnostics for use in near-patient settings. Here, we review three case studies to illustrate the flexibility and analytical power offered by microanalytical tools. We first overview a near-patient tool for detection of protein markers found in cerebrospinal fluid (CSF), as a means to identify the presence of cerebrospinal fluid in nasal mucous - an indication that CSF is leaking into the nasal cavity. Microfluidic design allowed integration of several up-stream preparatory steps and rapid, specific completion of the human CSF protein assay. Second, we overview a tear fluid based assay for lactoferrin, a protein produced in the lacrimal gland, then secreted into tear fluid. Tear Lf is a putative biomarker for primary SS. A critical contribution of this and related work being measurement of Lf, even in light of well-known and significant matrix interactions and losses during the tear fluid collection and preparation. Lastly, we review a microfluidic barcode platform that enables rapid measurement of multiple infectious disease biomarkers in human sera. The assay presents a new approach to multiplexed biomarker detection, yet in a simple straight microchannel - thus providing a streamlined, simplified microanalytical platform, as is relevant to robust operation in diagnostic settings. We view microfluidic design and analytical chemistry as the basis for emerging, sophisticated assays that will advance not just screening diagnostic technology, but confirmatory assays, sample preparation and handling, and thus introduction and utilization of new biomarkers and assay formats.

  11. Deriving a preference-based utility measure for cancer patients from the European Organisation for the Research and Treatment of Cancer’s Quality of Life Questionnaire C30: a confirmatory versus exploratory approach

    Science.gov (United States)

    Costa, Daniel SJ; Aaronson, Neil K; Fayers, Peter M; Grimison, Peter S; Janda, Monika; Pallant, Julie F; Rowen, Donna; Velikova, Galina; Viney, Rosalie; Young, Tracey A; King, Madeleine T

    2014-01-01

    Background Multi attribute utility instruments (MAUIs) are preference-based measures that comprise a health state classification system (HSCS) and a scoring algorithm that assigns a utility value to each health state in the HSCS. When developing a MAUI from a health-related quality of life (HRQOL) questionnaire, first a HSCS must be derived. This typically involves selecting a subset of domains and items because HRQOL questionnaires typically have too many items to be amendable to the valuation task required to develop the scoring algorithm for a MAUI. Currently, exploratory factor analysis (EFA) followed by Rasch analysis is recommended for deriving a MAUI from a HRQOL measure. Aim To determine whether confirmatory factor analysis (CFA) is more appropriate and efficient than EFA to derive a HSCS from the European Organisation for the Research and Treatment of Cancer’s core HRQOL questionnaire, Quality of Life Questionnaire (QLQ-C30), given its well-established domain structure. Methods QLQ-C30 (Version 3) data were collected from 356 patients receiving palliative radiotherapy for recurrent/metastatic cancer (various primary sites). The dimensional structure of the QLQ-C30 was tested with EFA and CFA, the latter informed by the established QLQ-C30 structure and views of both patients and clinicians on which are the most relevant items. Dimensions determined by EFA or CFA were then subjected to Rasch analysis. Results CFA results generally supported the proposed QLQ-C30 structure (comparative fit index =0.99, Tucker–Lewis index =0.99, root mean square error of approximation =0.04). EFA revealed fewer factors and some items cross-loaded on multiple factors. Further assessment of dimensionality with Rasch analysis allowed better alignment of the EFA dimensions with those detected by CFA. Conclusion CFA was more appropriate and efficient than EFA in producing clinically interpretable results for the HSCS for a proposed new cancer-specific MAUI. Our findings suggest

  12. [Review of experiments measuring CP nonconservation

    International Nuclear Information System (INIS)

    Gollin, G.D.

    1985-08-01

    Recent experiments setting limits on the magnitude of the ratio of two CP nonconservation parameters epsilon'/epsilon are discussed. Gauge theory calculations suggest that epsilon'/epsilon > .005, somewhat at odds with the results epsilon'/epsilon = -.0046 +- .0058 from a Chicago-Saclay measurement and epsilon'/epsilon = .0017 +- .0082 from a Yale-BNL experiment. 9 refs., 5 figs., 2 tabs

  13. Measuring the Subjective User eXperience

    Science.gov (United States)

    Kaptein, Maurits

    Measuring the subjective user experience is a challenging task. In this tutorial we will demonstrate how psychological constructs can be divided in separate variables, each measured by its individual questionnaire items. The tutorial will address the analysis of the questionnaire data to estimate its validity and reliability. Analysis will be demonstrated using SPSS.

  14. Assessing Women's Negative Sanitation Experiences and Concerns: The Development of a Novel Sanitation Insecurity Measure.

    Science.gov (United States)

    Caruso, Bethany A; Clasen, Thomas; Yount, Kathryn M; Cooper, Hannah L F; Hadley, Craig; Haardörfer, Regine

    2017-07-11

    Lack of access to acceptable sanitation facilities can expose individuals, particularly women, to physical, social, and mental health risks. While some of the challenges have been documented, standard metrics are needed to determine the extent to which women have urination- and defecation-related concerns and negative experiences. Such metrics also are needed to assess the effectiveness of interventions to mitigate them. We developed a sanitation insecurity measure to capture the range and frequency of women's sanitation-related concerns and negative experiences. Research was conducted in rural Odisha, India with women across various life course stages to reflect a range of perspectives. This paper documents the mixed data collection methods and the exploratory and confirmatory factor analyses we employed to arrive at a final measure. The final sanitation insecurity measure includes 50 items across seven factors that reflect the physical environment, the social environment, and individual-level constraints. Most factor scores were significantly higher for unmarried women and for women who lacked access to functional latrines, indicating social and environmental influence on experiences. This measure will enable researchers to evaluate how sanitation insecurity affects health and to determine if and how sanitation interventions ameliorate women's concerns and negative experiences associated with sanitation.

  15. The structure of assertiveness : a confirmatory approach

    NARCIS (Netherlands)

    ARRINDELL, WA; SANDERMAN, R; VANDERMOLEN, H; VANDERENDE, J; MERSCH, PP

    1988-01-01

    By using confirmatory factor analysis, distress and performance factors of assertion identified previously in a sample of predomi- nantly agoraphobic club members (N = 703) employing the Scale for Interpersonal Behavior (SlB) - the factors being (I) Display of negative feelings; (II) Expression of

  16. Experiment for a precision neutrino mass measurement

    International Nuclear Information System (INIS)

    Fackler, O.; Mugge, M.; Sticker, H.; Woerner, R.

    1984-04-01

    We describe an experiment which is designed to determine the electron neutrino mass to better than 2 eV. Key features of the experiment are a high activity frozen tritium source and a high resolution electrostatic spectrometer designed to make a careful measurement of the tritium beta decay end point spectrum. The goal is to determine the neutrino mass to better than 1 eV statistically in a four day run. A series of these runs will allow study of potential systematics. The construction phase is nearly complete and preliminary data will be taken in late spring

  17. Confirmatory experiments for the United States Department of Energy Accelerator Production of Tritium Program: Neutron, triton and radionuclide production by thick targets of lead and tungsten bombarded by 800 MeV protons

    International Nuclear Information System (INIS)

    Lisowski, P.W.; Cappiello, M.; Ullmann, J.L.; Gavron, A.; King, J.D.; Laird, R.; Mayo, D.; Waters, L.; Zoeller, C.; Staples, P.

    1994-01-01

    Neutron and Triton Production by 800 MeV Protons: The experiments presented in this report were performed in support of the Accelerator Production of Tritium (APT) project at the Los Alamos Weapons Neutron Research (WNR) facility in order to provide data to benchmark and validate physics simulations used in the APT target/blanket design. An experimental apparatus was built that incorporated many of the features of the neutron source region of the 3 He target/blanket. Those features included a tungsten neutron source, flux traps, neutron moderator, lead backstop, lead multiplying annulus, neutron absorbing blanket and a combination neutron de-coupler and tritium producing gas ( 3 He). The experiments were performed in two separate proton irradiations each with approximately 100 nA-hr of 800 MeV protons. The first irradiation was made with a small neutron moderating blanket, allowing the authors to measure tritium production in the 3 He gas by sampling, and counting the amount of tritium. The second irradiation was performed with a large neutron moderating blanket (light water with a 1% manganese sulfate solution) that allowed them to measure both the tritium production in the central region and the total neutron production. The authors did this by sampling and counting the tritium produced and by measuring the activation of the manganese solution. Results of the three tritium production measurements show large disagreements with each other and therefore with the values predicted using the LAHET-MCNP code system. The source of the discrepancies may lie with the sampling system or adsorption on the tungsten surfaces. The authors discuss tests that may resolve that issue. The data for the total neutron production measurement is much more consistent. Those results show excellent agreement between calculation and experiment

  18. Mechanical measurements in RFX-mod experiment

    Energy Technology Data Exchange (ETDEWEB)

    Dalla Palma, M., E-mail: mauro.dallapalma@igi.cnr.it [Consorzio RFX, EURATOM-ENEA Association, Corso Stati Uniti 4, 35127 Padova (Italy); Ravarotto, D.; Dal Bello, S.; Fincato, M.; Ghiraldelli, R.; Marchiori, G.; Taliercio, C.; Zaccaria, P. [Consorzio RFX, EURATOM-ENEA Association, Corso Stati Uniti 4, 35127 Padova (Italy)

    2010-12-15

    The ongoing experimental campaigns of RFX-mod are performed setting operational parameters at the nominal or exceeding design values of the experiment. Compressive forces up to 11 MN are produced by high magnetizing currents that reach values up to 50 kA. These forces heavily load the mechanical structure of RFX-mod and their effects are measured and monitored in order to assess the expected structural response and machine reliability during operation. Mechanical strains and relative displacements are real time measured during each experimental pulse by 48 strain gauges located on 12 mechanical struts and 16 potentiometers positioned between the toroidal assembly and the support mechanical structure. The strains in the most stressed components are measured by means of 24 half bridge gauges preliminarily calibrated. Particular care has been given to sensor choices and installation in order to minimize signal noises induced by the electrical and magnetic fields. The residual noises have been further reduced by proper sampling frequency and averaging techniques. The strains measured on the struts are then post-processed to calculate the resultant forces and bending moments, while the displacement measurements give an estimate of the overall stiffness of the mechanical structure. The measured forces and displacements are shown per toroidal locations and as a function of the current intensity, so verifying the uniform sharing of forces among the different struts and the proper square law correlation with the magnetizing current intensity.

  19. Cavity QED experiments, entanglement and quantum measurement

    International Nuclear Information System (INIS)

    Brune, M.

    2001-01-01

    This course is devoted to the physics of entanglement in microwave CQED (cavity quantum electrodynamics) experiments. The heart of this system is a microwave photon trap, made of superconducting mirrors, which stores a few-photon field in a small volume of space for times as long as milliseconds. This field interacts with circular Rydberg atoms injected one by one into the cavity. Section 2 is devoted to the description of the strong coupling regime in Rydberg atom CQED. The tools of the experiment are briefly presented at the beginning of this section as well as the main characteristics of the strong coupling regime. We then show in section 3 how to use the strong interaction with a single photon to perform a non-destructive detection of a single photon with a single atom as a meter. In section 4, we show that the achieved QND (quantum non-demolition) measurement process corresponds to the operation of a quantum phase gate. It allows, in principle, to prepare arbitrary atom + field entangled states. Various methods will be presented for preparing entangled states such as a two atom EPR (Einstein Podolsky Rosen) pair as well as a GHZ triplet. Entanglement involving more and more complex systems will then be investigated in section 5 where the preparation of a ''Schroedinger cat state'' of the cavity field is presented. We especially address in this last section the problem of entanglement between the system and the meter which occurs during any quantum measurement process

  20. Measuring Antineutrino Oscillations with the MINOS Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Justin John [Univ. of Oxford (United Kingdom)

    2008-09-01

    MINOS is a long baseline neutrino oscillation experiment. A manmade beam of predominantly muon neutrinos is detected both 1 km and 735 km from the production point by two functionally identical detectors. A comparison of the energy spectra measured by the two detectors shows the energy-dependent disappearance of muon neutrinos characteristic of oscillations and allows a measurement of the parameters governing the oscillations. This thesis presents work leading to measurements of disappearance in the 6% $\\bar{v}$μ background in that beam. A calibration is developed to correct for time-dependent changes in the responses of both detectors, reducing the corresponding uncertainty on hadronic energy measurements from 1.8% to 0.4% in the near detector and from 0.8% to 0.4% in the far detector. A method of selecting charged current $\\bar{v}$μ events is developed, with purities (efficiencies) of 96.5% (74.4%) at the near detector, and 98.8% (70.9%) at the far detector in the region below 10 GeV reconstructed antineutrino energy. A method of using the measured near detector neutrino energy spectrum to predict that expected at the far detector is discussed, and developed for use in the $\\bar{v}$μ analysis. Sources of systematic uncertainty contributing to the oscillation measurements are discussed. In the far detector, 32 charged current $\\bar{v}$μ events are observed below a reconstructed energy of 30 GeV, compared to an expectation of 47.8 for Δ$\\bar{m}$atm2 = Δ$\\bar{m}$atm2, sin2(2$\\bar{θ}$23) = sin2(2θ23). This deficit, in such a low-statistics sample, makes the result difficult to interpret in the context of an oscillation parameter measurement. Possible sources for the discrepancy are discussed, concluding that considerably more data are required for a definitive solution. Running MINOS with a dedicated $\\bar

  1. Compression measurement in laser driven implosion experiments

    International Nuclear Information System (INIS)

    Attwood, D.T.; Cambell, E.M.; Ceglio, N.M.; Lane, S.L.; Larsen, J.T.; Matthews, D.M.

    1981-01-01

    This paper discusses the measurement of compression in the context of the Inertial Confinement Fusion Programs' transition from thin-walled exploding pusher targets, to thicker walled targets which are designed to lead the way towards ablative type implosions which will result in higher fuel density and pR at burn time. These experiments promote desirable reactor conditions but pose diagnostic problems because of reduced multi-kilovolt x-ray and reaction product emissions, as well as increasingly more difficult transport problems for these emissions as they pass through the thicker pR pusher conditions. Solutions to these problems, pointing the way toward higher energy twodimensional x-ray images, new reaction product imaging ideas and the use of seed gases for both x-ray spectroscopic and nuclear activation techniques are identified

  2. Strangeness measurements with the PHOBOS experiment

    Science.gov (United States)

    Veres, Gábor I.; PHOBOS Collaboration; Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Busza, W.; Carroll, A.; Chai, Z.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Halliwell, C.; Hamblen, J.; Hauer, M.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Holynski, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Khan, N.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Reed, C.; Roland, C.; Roland, G.; Sagerer, J.; Seals, H.; Sedykh, I.; Smith, C. E.; Stankiewicz, M. A.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Vaurynovich, S. S.; Verdier, R.; Wenger, E.; Wolfs, F. L. H.; Wosiek, B.; Wozniak, K.; Wyslouch, B.

    2006-12-01

    Recent results on identified particle production from the PHOBOS experiment at the relativistic heavy-ion collider (RHIC) are summarized. Transverse momentum spectra of pions, kaons, protons and antiprotons from Au+Au collisions at \\sqrt{s_{NN}} = 62.4\\,GeV are presented close to mid-rapidity. Baryons have been found to have substantially harder transverse momentum spectra than mesons. The p/π+ ratio reaches unity at high pT, which fits into a smooth trend together with measurements at lower and higher collision energies. At very low transverse momenta no significant excess of particle yield was found, compared to extrapolations from higher pT. The net proton yield at mid-rapidity appears to be proportional to the number of participant nucleons in Au+Au collisions. The PHOBOS acceptance and mass resolution for the phi meson at low pT were studied in detail.

  3. Confirmatory factor analysis using Microsoft Excel.

    Science.gov (United States)

    Miles, Jeremy N V

    2005-11-01

    This article presents a method for using Microsoft (MS) Excel for confirmatory factor analysis (CFA). CFA is often seen as an impenetrable technique, and thus, when it is taught, there is frequently little explanation of the mechanisms or underlying calculations. The aim of this article is to demonstrate that this is not the case; it is relatively straightforward to produce a spreadsheet in MS Excel that can carry out simple CFA. It is possible, with few or no programming skills, to effectively program a CFA analysis and, thus, to gain insight into the workings of the procedure.

  4. NRC Confirmatory Testing Program for SBWR

    International Nuclear Information System (INIS)

    Han, J.T.; Bessette, D.E.; Shotkin, L.M.

    1994-01-01

    The objective of the NRC Confirmatory Testing Program for SBWR is to provide integral data for code assessment, which reasonably reproduce the important phenomena and processes expected in the SBWR under various loss-of-coolant accident (LOCA) and transient conditions. To achieve this objective, the Program consists of four coupled elements: (1) to design and construct an integral, carefully-scaled SBWR test facility at Purdue Univ., (2) to provide pre-construction RELAP5/CONTAIN predictions of the facility design, (3) to provide confirmatory data for code assessment, and (4) to assess the RELAP5/CONTAIN code with data. A description of the open-quotes preliminary designclose quotes of the Purdue test facility and test matrix is presented. The facility is scheduled to be built by December 1994. Approximately 50 tests will be performed from April 1995 through April 1996 and documented by interim data reports. A final and complete data report is scheduled to be published by July 31, 1996

  5. Confirmatory Survey Report for the Quehanna Decommissioning Project, Karthaus, PA

    International Nuclear Information System (INIS)

    W. C. Adams

    2007-01-01

    The survey activities consisted of visual inspections and radiological surveys including beta and gamma surface scans and surface beta activity measurements. The objectives of the confirmatory survey were to provide independent field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the licensee's procedures and FSS data. Additionally, this review provided assurance that the licensee adequately designed the FSS and fulfilled the commitments contained in the DP. ORISE has reviewed ESL's revised DP and revised FSSP for adequacy and appropriateness taking into account commitments contained in these documents that were approved by the NRC (ESL 2006a and b). These documents contain the release criteria for the site, along with the documentation on the derivation of the release criteria. The final survey data for the survey units (SU) to be evaluated were reviewed by ORISE prior to mobilization to the site and while at the site during confirmatory survey activities. ORISE reviewed and evaluated the radiological data, in accordance with the ORISE survey plan and other referenced documents, to ensure that FSS procedures and results adequately met site DP and FSSP commitments

  6. Strain measurements during pressurized thermal shock experiment

    International Nuclear Information System (INIS)

    Tarso Vida Gomes, P. de; Julio Ricardo Barreto Cruz; Tanius Rodrigues Mansur; Denis Henrique Bianchi Scaldaferri; Miguel Mattar Neto

    2005-01-01

    For the life extension of nuclear power plants, the residual life of most of their components must be evaluated along all their operating time. Concerning the reactor pressure vessel, the pressurized thermal shock (PTS) is a very important event to be considered. For better understanding the effects of this kind of event, tests are made. The approach described here consisted of building a simplified in-scale physical model of the reactor pressure vessel, submitting it to the actual operating temperature and pressure conditions and provoking a thermal shock by means of cold water flow in its external surface. To conduct such test, the Nuclear Technology Development Center (CDTN) has been conducting several studies related to PTS and has also built a laboratory that has made possible the simulation of the PTS loading conditions. Several cracks were produced in the external surface of the reactor pressure vessel model. Strain gages were fixed by means of electrical discharge welding over the cracks regions in both external and internal surfaces. The temperature was monitored in 10 points across the vessel wall. The internal pressure was manually controlled and monitored using a pressure transducer. Two PTS experiments were conducted and this paper presents the strain measurement procedures applied to the reactor pressure vessel model, during the PTS, using strain gages experimental methodology. (authors)

  7. Monitoring stress among internal medicine residents: an experience-driven, practical and short measure.

    Science.gov (United States)

    Myszkowski, Nils; Villoing, Barbara; Zenasni, Franck; Jaury, Philippe; Boujut, Emilie

    2017-07-01

    Residents experience severely high levels of stress, depression and burnout, leading to perceived medical errors, as well as to symptoms of impairment, such as chronic anger, cognitive impairment, suicidal behavior and substance abuse. Because research has not yet provided a psychometrically robust population-specific tool to measure the level of stress of medicine residents, we aimed at building and validating such a measure. Using an inductive scale development approach, a short, pragmatic measure was built, based on the interviews of 17 medicine residents. The Internal Medicine Residency Stress Scale (IMRSS) was then administered in a sample of 259 internal medicine residents (199 females, 60 males, M Age  = 25.6) along with the Hospital Anxiety and Depression Scale, Maslach Burnout Inventory, Satisfaction With Life Scale and Ways of Coping Checklist. The IMRSS showed satisfactory internal reliability (Cronbach's α = .86), adequate structural validity - studied through Confirmatory Factor Analysis (χ 2 /df = 2.51, CFI = .94; SRMR = .037, RMSEA = .076) - and good criterion validity - the IMRSS was notably strongly correlated with emotional exhaustion (r = .64; p is recommended to quickly and frequently assess and monitor stress among internal medicine residents.

  8. Confirmatory Factor Analysis Alternative: Free, Accessible CBID Software.

    Science.gov (United States)

    Bott, Marjorie; Karanevich, Alex G; Garrard, Lili; Price, Larry R; Mudaranthakam, Dinesh Pal; Gajewski, Byron

    2018-02-01

    New software that performs Classical and Bayesian Instrument Development (CBID) is reported that seamlessly integrates expert (content validity) and participant data (construct validity) to produce entire reliability estimates with smaller sample requirements. The free CBID software can be accessed through a website and used by clinical investigators in new instrument development. Demonstrations are presented of the three approaches using the CBID software: (a) traditional confirmatory factor analysis (CFA), (b) Bayesian CFA using flat uninformative prior, and (c) Bayesian CFA using content expert data (informative prior). Outcomes of usability testing demonstrate the need to make the user-friendly, free CBID software available to interdisciplinary researchers. CBID has the potential to be a new and expeditious method for instrument development, adding to our current measurement toolbox. This allows for the development of new instruments for measuring determinants of health in smaller diverse populations or populations of rare diseases.

  9. Experience with confirmation measurement at Los Alamos

    International Nuclear Information System (INIS)

    Marshall, R.S.; Wagner, R.P.; Hsue, F.

    1985-01-01

    Confirmation measurements are used at Los Alamos in support of incoming and outgoing shipment accountibility and for support of both at 235 U and Pu inventories. Statistical data are presented to show the consistency of measurements on items of identical composition and on items measured at two facilitis using similar instruments. A description of confirmation measurement techniques used in support of 235 U and Pu inventories and a discussion on the ability of the measurements to identify items with misstated SNM are given

  10. Experience with confirmation measurement at Los Alamos

    International Nuclear Information System (INIS)

    Marshall, R.S.; Wagner, R.P.

    1985-01-01

    Confirmation measurements are used at Los Alamos in support of incoming and outgoing shipment accountability and for support of both 235 U and Pu inventories. Statistical data are presented to show the consistency of measurements on items of identical composition and on items measured at two facilities using similar instruments. A description of confirmation measurement techniques used in support of 235 U and Pu inventories and a discussion on the ability of the measurements to identify items with misstated SNM are given

  11. Measuring Emotions in the Consumption Experience.

    OpenAIRE

    Richins, Marsha L

    1997-01-01

    Although consumption-related emotions have been studied with increasing frequency in consumer behavior, issues concerning the appropriate way to measure these emotions remain unresolved This article reviews the emotion measures currently used in consumer research and the theories on which they are based; it concludes that the existing measures are unsuited for the purpose of measuring consumption-related emotions. The article describes six empirical studies that assess the domain of consumpti...

  12. Psychometric Evaluation of the Student Authorship Questionnaire: A Confirmatory Factor Analysis Approach

    Science.gov (United States)

    Ballantine, Joan; Guo, Xin; Larres, Patricia

    2015-01-01

    This research provides new insights into the measurement of students' authorial identity and its potential for minimising the incidence of unintentional plagiarism by providing evidence about the psychometric properties of the Student Authorship Questionnaire (SAQ). Exploratory and confirmatory factor analyses (EFA and CFA) are employed to…

  13. Psychometric Properties and Confirmatory Factor Analysis of the Student Engagement in School Success Skills

    Science.gov (United States)

    Brigman, Greg; Wells, Craig; Webb, Linda; Villares, Elizabeth; Carey, John C.; Harrington, Karen

    2015-01-01

    This article describes the confirmatory factor analysis of the Student Engagement in School Success Skills (SESSS) instrument. The results of this study confirm that the SESSS has potential to be a useful self-report measure of elementary students' use of strategies and skills associated with enhanced academic learning and achievement.

  14. Comparison of four techniques for the confirmatory identification of Neisseria gonorrhoeae

    International Nuclear Information System (INIS)

    Jacobs, P.F.

    1980-01-01

    The authors have compared four assay techniques for the confirmatory identification of Neisseria gonorrhoeae. On of these is a radiometric assay, based on the measurement of liberated radiolabelled CO 2 from metabolized carbohydrates which have been tagged with 14 C. The assay uses glucose, maltose and fructose as its differentiating sugars, plus the ONPG reaction, and can be read in three hours. (Auth.)

  15. Assessing Women’s Negative Sanitation Experiences and Concerns: The Development of a Novel Sanitation Insecurity Measure

    Directory of Open Access Journals (Sweden)

    Bethany A. Caruso

    2017-07-01

    Full Text Available Lack of access to acceptable sanitation facilities can expose individuals, particularly women, to physical, social, and mental health risks. While some of the challenges have been documented, standard metrics are needed to determine the extent to which women have urination- and defecation-related concerns and negative experiences. Such metrics also are needed to assess the effectiveness of interventions to mitigate them. We developed a sanitation insecurity measure to capture the range and frequency of women’s sanitation-related concerns and negative experiences. Research was conducted in rural Odisha, India with women across various life course stages to reflect a range of perspectives. This paper documents the mixed data collection methods and the exploratory and confirmatory factor analyses we employed to arrive at a final measure. The final sanitation insecurity measure includes 50 items across seven factors that reflect the physical environment, the social environment, and individual-level constraints. Most factor scores were significantly higher for unmarried women and for women who lacked access to functional latrines, indicating social and environmental influence on experiences. This measure will enable researchers to evaluate how sanitation insecurity affects health and to determine if and how sanitation interventions ameliorate women’s concerns and negative experiences associated with sanitation.

  16. Planar impact experiments for EOS measurements

    International Nuclear Information System (INIS)

    Furnish, M.D.

    1993-01-01

    The community concerned with the numerical modeling of groundshock produced by underground nuclear tests must have access to materials data to benchmark models of rock behavior. Historically the primary source of these data has been planar impact experiments. These experiments have involved gun, explosive and electrical launchers. Other methods of introducing planar shocks include shock driving by in-contact explosives or laser bursts. This paper briefly describes gun launcher-based planar impact methods used to characterize geological materials at Sandia National Laboratories

  17. Validation of the Child HCAHPS survey to measure pediatric inpatient experience of care in Flanders.

    Science.gov (United States)

    Bruyneel, Luk; Coeckelberghs, Ellen; Buyse, Gunnar; Casteels, Kristina; Lommers, Barbara; Vandersmissen, Jo; Van Eldere, Johan; Van Geet, Chris; Vanhaecht, Kris

    2017-07-01

    The recently developed Child HCAHPS provides a standard to measure US hospitals' performance on pediatric inpatient experiences of care. We field-tested Child HCAHPS in Belgium to instigate international comparison. In the development stage, forward/backward translation was conducted and patients assessed content validity index as excellent. The draft Flemish Child HCAHPS included 63 items: 38 items for five topics hypothesized to be similar to those proposed in the US (communication with parent, communication with child, attention to safety and comfort, hospital environment, and global rating), 10 screeners, a 14-item demographic and descriptive section, and one open-ended item. A 6-week pilot test was subsequently performed in three pediatric wards (general ward, hematology and oncology ward, infant and toddler ward) at a JCI-accredited university hospital. An overall response rate of 90.99% (303/333) was achieved and was consistent across wards. Confirmatory factor analysis largely confirmed the configuration of the proposed composites. Composite and single-item measures related well to patients' global rating of the hospital. Interpretation of different patient experiences across types of wards merits further investigation. Child HCAHPS provides an opportunity for systematic and cross-national assessment of pediatric inpatient experiences. Sharing and implementing international best practices are the next logical step. What is Known: • Patient experience surveys are increasingly used to reflect on the quality, safety, and centeredness of patient care. • While adult inpatient experience surveys are routinely used across countries around the world, the measurement of pediatric inpatient experiences is a young field of research that is essential to reflect on family-centered care. What is New: • We demonstrate that the US-developed Child HCAHPS provides an opportunity for international benchmarking of pediatric inpatient experiences with care through parents

  18. Instrumentation, measurements, and experiments in fluids

    CERN Document Server

    Rathakrishnan, E

    2007-01-01

    NEED AND OBJECTIVE OF EXPERIMENTAL STUDY Some Fluid Mechanics MeasurementsMeasurement SystemsSome of the Important Quantities Associated with FluidFlow MeasurementsFUNDAMENTALS OF FLUID MECHANICSProperties of FluidsThermodynamic PropertiesSurface TensionAnalysis of Fluid FlowBasic and Subsidiary Laws for Continuous MediaKinematics of Fluid FlowStreamlinesPotential FlowViscous FlowsGas DynamicsWIND TUNNELSLow-Speed Wind TunnelsPower Losses in a Wind TunnelHigh-Speed Wind TunnelsHypersonic TunnelsInstrume

  19. Recent Multiboson measurements with the ATLAS experiment

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Measurements of the cross sections of the production of two electroweak gauge bosons constitute stringent tests of the electroweak sector of the Standard Model and provide a model-independent means to search for new physics at the TeV scale. We present recent ATLAS measurements of inclusive and differential cross sections for WW, WZ, ZZ and Z + photon at centre of mass energies of 8 TeV and 13 TeV. Large next-to-next-to-leading order QCD corrections were recently calculated and are confronted with the measurements. We also present recent ATLAS measurements of inclusive cross sections for electroweak production of WZ + 2 jets and production of Z + di-photon at 8 TeV. Differential distributions sensitive to anomalous triple and quartic gauge couplings have been studied and limits on new physics have been derived.

  20. Virtual experiment instrument of nuclear pulse measuring

    International Nuclear Information System (INIS)

    Shan Jian; Zhao Xiuliang; Yu Hong; Zhang Meiqin

    2009-01-01

    Study on the scheme of application of virtual instrument(VI) technique in measuring of nuclear pulse. The system of Counter based on technology of LabVIEW and NI company's products USB-6009-DAQ is developed. Virtual nuclear instrument-Virtual Counter is realized. This system extends the application of technology of virtual instrument. The experimental results indicate that the system of Counter had the good counting measuring function of Nuclear Pulse. (authors)

  1. Experiment to measure vacuum birefringence: Conceptual design

    Science.gov (United States)

    Mueller, Guido; Tanner, David; Doebrich, Babette; Poeld, Jan; Lindner, Axel; Willke, Benno

    2016-03-01

    Vacuum birefringence is another lingering challenge which will soon become accessible to experimental verification. The effect was first calculated by Euler and Heisenberg in 1936 and is these days described as a one-loop correction to the differential index of refraction between light which is polarized parallel and perpendicular to an external magnetic field. Our plan is to realize (and slightly modify) an idea which was originally published by Hall, Ye, and Ma using advanced LIGO and LISA technology and the infrastructure of the ALPS light-shining-through-walls experiment following the ALPS IIc science run. This work is supported by the Deutsche Forschungsgemeinschaft and the Heising-Simons Foundation.

  2. Coulomb's Electrical Measurements. Experiment No. 14.

    Science.gov (United States)

    Devons, Samuel

    Presented is information related to the life and work of Charles Coulomb as well as detailed notes of his measurements of the distribution of electricity on conductors. The two methods that he used (the large torsion balance, and the timing of "force" oscillations) are described. (SA)

  3. Pen Branch fault: Confirmatory drilling results

    International Nuclear Information System (INIS)

    Stieve, A.; Coruh, C.; Costain, J.K.

    1994-01-01

    The Confirmatory Drilling Project is the final investigation under the Pen Branch Fault Program initiated to determine the capability of the Pen Branch fault (PBF) to release seismic energy. This investigation focused on a small zone over the fault where previously collected seismic reflection data had indicated the fault deforms the subsurface at 150 msec (with reference to an 80 m reference datum). Eighteen drill holes, 2 to basement and the others to 300 ft, were arranged in a scatter pattern over the fault. To adequately define configuration of the layers deformed by the fault boreholes were spaced over a zone of 800 ft, north to south. The closely spaced data were to confirm or refute the existence of flat lying reflectors observed in seismic reflection data and to enable the authors to identify and correlate lithologic layers with seismic reflection data. Results suggest that deformation by the fault in sediments 300 ft deep ad shallower is subtle. Corroboration of the geologic interpretation with the seismic reflection profile is ongoing but preliminary results indicate that specific reflectors can be assigned to lithologic layers. A large amplitude package of reflections below a flat lying continuous reflection at 40 msec can be correlated with a lithology that corresponds to carbonate sediments in geologic cross-section. Further, data also show that a geologic layer as shallow as 30 ft can be traced on these seismic data over the same subsurface distance where geologic cross-section shows corresponding continuity. The subsurface structure is thus corroborated by both methods at this study site

  4. Historical perspective on confirmatory data gathering

    International Nuclear Information System (INIS)

    Budge, D.R.

    1982-01-01

    Confirmatory earth science investigation in the nuclear power area began with the development of NRC siting standards. They arose from controversies stemming from nuclear power plant siting. The standards were intended to provide means for assessing the magnitude of a given hazard for earth scientists, and as a means to determine compliance for a regulator. They were developed for use in a quasi-legal format where technical disputes could be debated and resolved, and licensing actions brought to a conclusion satisfactory to industry, environmental groups, and professional scientists and engineers. Regulations (requirements mandated by law), regulatory guides (recommended procedures), and staff positions (statements of staff opinion) are the three basic types of NRC standards. As inherent quality of NRC's earth science standards is the recognition that an evaluation of the mutual relationships between descriptive observational data and the interpretive geologic assessment must take place; and that due to the nature of the earth science information base quantification and codification of data and conclusions are often impossible. Accordingly, siting assessment conclusions made in what is a rapidly evolving technology must frequently be reassessed and reconfirmed. In short, earth scientists and regulators dealing with the siting of nuclear facilities are working with living systems. Four major problem areas have existed in the nuclear power program. These areas deal with the development of an expanded sense of posterity, the need to more adequately scope the exact nature of a given problem, the adequacy of an existing design to envelop unforeseen concerns, and politics. These problem areas and those of the descriptive-interpretive aspects are directly transferable to waste disposal siting

  5. Nursing students' attitudes towards information and communication technology: an exploratory and confirmatory factor analytic approach.

    Science.gov (United States)

    Lee, Jung Jae; Clarke, Charlotte L

    2015-05-01

    The aim of this study was to develop and psychometrically test a shortened version of the Information Technology Attitude Scales for Health, in the investigation of nursing students with clinical placement experiences. Nurses and nursing students need to develop high levels of competency in information and communication technology. However, they encounter statistically significant barriers in the use of the technology. Although some instruments have been developed to measure factors that influence nurses' attitudes towards technology, the validity is questionable and few studies have been developed to test the attitudes of nursing students, in particular. A cross-sectional survey design was performed. The Information Technology Attitude Scales for Health was used to collect data from October 2012-December 2012. A panel of experts reviewed the content of the instrument and a pilot study was conducted. Following this, a total of 508 nursing students, who were engaged in clinical placements, were recruited from six universities in South Korea. Exploratory and confirmatory factor analyses were performed and reliability and construct validity were assessed. The resulting instrument consisted of 19 items across four factors. Reliability of the four factors was acceptable and the validity was supported. The instrument was shown to be both valid and reliable for measuring nursing students' attitudes towards technology, thus aiding in the current understandings of this aspect. Through these measurements and understandings, nursing educators and students are able to be more reflexive of their attitudes and can thus seek to develop them positively. © 2015 John Wiley & Sons Ltd.

  6. Experiences in integrated leak rate measurements

    International Nuclear Information System (INIS)

    Shirk, R.E.

    1982-01-01

    During a hypothetical design basis accident for nuclear power plants, the reactor containment system is relied upon to maintain radioactive exposure limits below acceptable limits. Integrated leak rate testing is a means of verifying that the leakage of radioactivity material from the reactor containment will be below allowable limits. Leakage rate computations are based on the ideal gas law. The absolute method of leakage rate testing utilizing mass point method of data analysis is recommended. Integrated leak rate testing data is obtained from pressure, drybulb temperature, dewpoint temperature, and flow measuring systems. Test data does not support the usual leakage (flow) - pressure square root relationship. The major source of potential leakage from the reactor containment is reactor containment isolation valves

  7. Measurement of kaons in the Helios experiment

    International Nuclear Information System (INIS)

    van Hecke, H.

    1990-01-01

    We have measured kaons and pions in the rapidity interval 0.8--1.3 and p T interval 100--600 MeV/c. We have observed an excess in the ratio of positive kaons to pions over what is expected from p-p for transverse momenta above 300 MeV/c. No such excess is seen for negatives. This excess of K/π increasing with p T has been observed in 14.5 GeV/A Si + Au collisions by E802 at the AGS. Though their data are concentrated at high p T , there is a small region of overlap between the coverage of HELIOS and E802 for p T = 0.4--0.5 GeV/c. In this region the K/π ratios for both positive and negative particles are very similar even though the bombarding energies differ by more than an order of magnitude. We find no strong indication that the rise in K/π above values expected from p-p collisions is higher for high-E T events than for low-E T events

  8. Measuring the experience of hospitality : Scale development and validation

    NARCIS (Netherlands)

    Pijls-Hoekstra, Ruth; Groen, Brenda H.; Galetzka, Mirjam; Pruyn, Adriaan T.H.

    2017-01-01

    This paper identifies what customers experience as hospitality and subsequently presents a novel and compact assessment scale for measuring customers’ experience of hospitality at any kind of service organization. The Experience of Hospitality Scale (EH-Scale) takes a broader perspective compared to

  9. Measuring sport experiences in children and youth to better understand the impact of sport on health and positive youth development: designing a brief measure for population health surveys.

    Science.gov (United States)

    Cairney, John; Clark, Heather J; Kwan, Matthew Y W; Bruner, Mark; Tamminen, Katherine

    2018-04-03

    Despite the proliferation of studies examining youth sport participation, there are significant gaps in knowledge regarding the impact of youth sport participation on health and development. These gaps are not new, but have persisted due to limitations with how sport participation is measured. Much of the research to date has measured sport participation as binary (yes/no) or count measures. This has been especially true in survey-based research. Yet, at the same time, research has investigated youths' experiences in sport such as the influence of coaches, teammates, and parents. The ability to measure these experiences is constrained by the need to use a number of measures along with gaps in the content covered in existing measures. We propose to develop and test the Sport Experiences Measure: Children and Youth (SEM:CY) as a population survey-based measure that captures the salient aspects of youths' experience in sport. The SEM:CY will be developed and tested across three phases. Phase I includes qualitative research with members of the sport community and engagement with an expert group to generate and obtain feedback on the initial item pool. In Phase II will recruit two consecutive samples of students from schools to complete the draft measure. Analysis will focus on assessing the items and factor structure of the measure. Factor structure will be assessed first with exploratory factor analysis and then confirmatory factor analysis. In phase III we will test the association between the SEM:CY with a measure of perceived competence, sport anxiety, and positive youth development to assess construct validity. We will also examine whether the structure of the measure varies by age or gender. The SEM:CY measure will provide a meaningful contribution to the measurement and understanding of youth sport participation. The SEM:CY can be used as a stand-alone measure to understand youth experiences in sport programs, or in combination with other health and development

  10. Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

    OpenAIRE

    Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

    2015-01-01

    Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

  11. Patient Experiences with the Preoperative Assessment Clinic (PEPAC): validation of an instrument to measure patient experiences

    NARCIS (Netherlands)

    Edward, G. M.; Lemaire, L. C.; Preckel, B.; Oort, F. J.; Bucx, M. J. L.; Hollmann, M. W.; de Haes, J. C. J. M.

    2007-01-01

    Background. Presently, no comprehensive and validated questionnaire to measure patient experiences of the preoperative assessment clinic (PAC) is available. We developed and validated the Patient Experiences with the Preoperative Assessment Clinic (PEPAC) questionnaire, which can be used for

  12. Measuring the user experience collecting, analyzing, and presenting usability metrics

    CERN Document Server

    Tullis, Thomas

    2013-01-01

    Measuring the User Experience was the first book that focused on how to quantify the user experience. Now in the second edition, the authors include new material on how recent technologies have made it easier and more effective to collect a broader range of data about the user experience. As more UX and web professionals need to justify their design decisions with solid, reliable data, Measuring the User Experience provides the quantitative analysis training that these professionals need. The second edition presents new metrics such as emotional engagement, personas, k

  13. Magnetic measurements for RFP experiment on STP-3(M)

    International Nuclear Information System (INIS)

    Nagata, Akiyoshi; Tamaru, Takeshi; Arimoto, Hideki; Yamada, Shuichi; Sato, Koichi.

    1984-03-01

    Magnetic measurements are arranged for RFP experiment on STP-3(M). Magnetic measurements will be applied to investigate the discharge parameters, F(field reversal ratio) - theta(pinch parameter) diagram, the physical mechanism of flux enhancement and the toroidal and poloidal mode numbers due to the MHD instability. Theoretical considerations and instrumental techniques for magnetic measurements are described in detail. (author)

  14. Measuring Instructional Differentiation in a Large-Scale Experiment

    Science.gov (United States)

    Williams, Ryan T.; Swanlund, Andrew; Miller, Shazia; Konstantopoulos, Spyros; Eno, Jared; van der Ploeg, Arie; Meyers, Coby

    2014-01-01

    This study operationalizes four measures of instructional differentiation: one for Grade 2 English language arts (ELA), one for Grade 2 mathematics, one for Grade 5 ELA, and one for Grade 5 mathematics. Our study evaluates their measurement properties of each measure in a large field experiment: the Indiana Diagnostic Assessment Tools Study, which…

  15. Confirmatory evidence for a multidimensional model of racial-ethnic socialization for transracially adoptive families.

    Science.gov (United States)

    Langrehr, Kimberly J; Thomas, Anita Jones; Morgan, Sydney K

    2016-07-01

    The purpose of the current study is to test a recently established model of racial-ethnic socialization (Langrehr, 2014) among 2 samples of White transracially adoptive parents and to assess whether the proposed model functions similarly after accounting for adopted child race. Based on a modified version of the Racial Bias Preparation Scale (Fisher, Wallace, & Fenton, 2000), confirmatory factor analysis was used to test the 3-factor model (i.e., Prejudice Awareness, Racial-Ethnic Pride, and Egalitarianism) among 172 White transracially adoptive parents with Asian children (Mage = 45.72) and 140 White transracially adoptive parents with Black children (Mage = 42.62). In addition, multigroup invariance testing was used to assess whether the proposed model functioned similarly across the 2 groups of parents. Results indicate that the proposed 3-factor model demonstrated partial measurement invariance such that the subconstruct of Egalitarianism functioned similarly across groups, whereas Racial-Ethnic Pride and Prejudice Awareness were deemed noninvariant. Findings are intended to help expand the concept of racial-ethnic socialization for transracially adoptive families and address the degree to which current research on racial-ethnic socialization can be applied to different transracially adoptive families. Results are intended to highlight ways that various social-cultural dimensions of family can culminate into different socialization experiences. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  16. Confirmatory factor analysis of the Competitive State Anxiety Inventory-2.

    Science.gov (United States)

    Lane, A M; Sewell, D F; Terry, P C; Bartram, D; Nesti, M S

    1999-06-01

    The aim of this study was to evaluate the factor structure of the Competitive State Anxiety Inventory-2 (CSAI-2) using confirmatory factor analysis. Volunteer participants (n = 1213) completed the CSAI-2 approximately 1 h before competition and the data were analysed in two samples. The hypothesized model showed poor fit indices in both samples independently (Robust Comparative Fit Index: sample A = 0.82, sample B = 0.84) and simultaneously (Comparative Fit Index = 0.83), suggesting that the factor structure proposed by Martens et al. is flawed. Our findings suggest that a limitation of the Cognitive Anxiety scale derives from phrasing items around the word 'concerned' rather than 'worried'. We suggest that being concerned about an impending performance does not necessarily mean that an athlete is experiencing negative thoughts, but that the athlete is acknowledging the importance and difficulty of the challenge and is attempting to mobilize resources to cope. The present results question the use of the CSAI-2 as a valid measure of competitive state anxiety.

  17. Confirmatory factor analysis of the female sexual function index.

    Science.gov (United States)

    Opperman, Emily A; Benson, Lindsay E; Milhausen, Robin R

    2013-01-01

    The Female Sexual Functioning Index (Rosen et al., 2000 ) was designed to assess the key dimensions of female sexual functioning using six domains: desire, arousal, lubrication, orgasm, satisfaction, and pain. A full-scale score was proposed to represent women's overall sexual function. The fifth revision to the Diagnostic and Statistical Manual (DSM) is currently underway and includes a proposal to combine desire and arousal problems. The objective of this article was to evaluate and compare four models of the Female Sexual Functioning Index: (a) single-factor model, (b) six-factor model, (c) second-order factor model, and (4) five-factor model combining the desire and arousal subscales. Cross-sectional and observational data from 85 women were used to conduct a confirmatory factor analysis on the Female Sexual Functioning Index. Local and global goodness-of-fit measures, the chi-square test of differences, squared multiple correlations, and regression weights were used. The single-factor model fit was not acceptable. The original six-factor model was confirmed, and good model fit was found for the second-order and five-factor models. Delta chi-square tests of differences supported best fit for the six-factor model validating usage of the six domains. However, when revisions are made to the DSM-5, the Female Sexual Functioning Index can adapt to reflect these changes and remain a valid assessment tool for women's sexual functioning, as the five-factor structure was also supported.

  18. Shaping the Future of Patient Experience Measurement in Canadian Healthcare.

    Science.gov (United States)

    Sutherland, Jason M

    2017-10-01

    Patients' experiences with healthcare providers can be tumultuous and stressful. Focusing on what matters, the experience of care is important to improving patients' quality of life. In this issue's lead article, Kuluski and colleagues (2017) propose moving beyond setting-based patient experience measures. In doing so, the authors emphasize the importance of caregivers and the communities in which patients live in improving patients' and caregivers' care experiences. To achieve these aims, however, the authors demand a higher level of reflexivity from provinces' healthcare funders and providers. © 2017 Longwoods Publishing.

  19. Measuring Patient Experiences: Is It Meaningful and Actionable?

    Science.gov (United States)

    Wong, Sabrina T; Johnston, Sharon; Burge, Fred; McGrail, Kim; Hogg, William

    2017-10-01

    Performance measurement must be meaningful to those being asked to contribute data and to the clinicians who are collecting the information. It must be actionable if performance measurement and reporting is to influence health system transformation. To date, measuring patient experiences in all parts of the healthcare system in Canada lags behind other countries. More attention needs to be paid to capturing patients with complex intersecting health and social problems that result from inequitable distribution of wealth and/or underlying structural inequities related to systemic issues such as racism and discrimination, colonialism and patriarchy. Efforts to better capture the experiences of patients who do not regularly access care and who speak English or French as a second language are also needed. Before investing heavily into collecting patient experience data as part of a performance measurement system the following ought to be considered: (1) ensuring value for and buy-in from clinicians who are being asked to collect the data and/or act on the results; (2) investment in the infrastructure to administer iterative, cost-effective patient/family experience data collection, analysis and reporting (e.g., automated software tools) and (3) incorporating practice support (e.g., facilitation) and health system opportunities to integrate the findings from patient experience surveys into policy and practice. Investment into the infrastructure of measuring, reporting and engaging clinicians in improving practice is needed for patient/caregiver experiences to be acted upon. © 2017 Longwoods Publishing.

  20. Experiment to measure the gravitational force on the antiproton

    International Nuclear Information System (INIS)

    Brown, R.E.

    1985-01-01

    A collaboration has been formed to measure the acceleration of antiprotons in the earth's gravitational field. The technique is to produce, decelerate, and trap quantities of antiprotons, to cool them to untralow energy, and to measure their acceleration in a time-of-flight experiment. Present plans and the results of initial efforts toward this end are presented

  1. Measures of aggression and victimization in portuguese adolescents: Cross-cultural validation of the Revised Peer Experience Questionnaire.

    Science.gov (United States)

    Queirós, Andreia N; Vagos, Paula

    2016-10-01

    The goal of this research was to develop and psychometrically evaluate the Portuguese version of the Revised Peer Experience Questionnaire, which assesses aggression, victimization and prosocial behavior. Victimization and aggression among adolescents in school settings is a growing problem, not yet fully understood or properly evaluated, particularly in Portugal. A sample of 1320 adolescents was recruited (52.7% female), with ages varying from 10 to 18 years old, attending middle and high school. Confirmatory factor analysis confirms the measurement model of the instrument's bully and victim versions, as evaluating overt, relational, and reputational aggression/victimization and providing/receiving prosocial behavior, respectively. This measurement model was invariant across schooling and gender, showed adequate internal consistency indicators, and presented evidence for construct validity in relation to other variables. Descriptive analyses indicate that boys are more aggressive in overt and relational forms and victimized through overt aggression, whereas girls are more aggressive and victimized relationally. More than any form of aggression or victimization, boys and girls revealed higher values for engaging in and receiving prosocial behavior. These results suggest that this instrument is a reliable, valid, and structurally sound measure of aggression, victimization and prosocial behavior in this Portuguese school-based community sample. Hence, its use may assist researchers in gaining a better understanding of adolescent aggression and victimization. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  2. Worry About Caregiving Performance: A Confirmatory Factor Analysis

    Directory of Open Access Journals (Sweden)

    Ruijie Li

    2018-03-01

    Full Text Available Recent studies on the Zarit Burden Interview (ZBI support the existence of a unique factor, worry about caregiving performance (WaP, beyond role and personal strain. Our current study aims to confirm the existence of WaP within the multidimensionality of ZBI and to determine if predictors of WaP differ from the role and personal strain. We performed confirmatory factor analysis (CFA on 466 caregiver-patient dyads to compare between one-factor (total score, two-factor (role/personal strain, three-factor (role/personal strain and WaP, and four-factor models (role strain split into two factors. We conducted linear regression analyses to explore the relationships between different ZBI factors with socio-demographic and disease characteristics, and investigated the stage-dependent differences between WaP with role and personal strain by dyadic relationship. The four-factor structure that incorporated WaP and split role strain into two factors yielded the best fit. Linear regression analyses reveal that different variables significantly predict WaP (adult child caregiver and Neuropsychiatric Inventory Questionnaire (NPI-Q severity from role/personal strain (adult child caregiver, instrumental activities of daily living, and NPI-Q distress. Unlike other factors, WaP was significantly endorsed in early cognitive impairment. Among spouses, WaP remained low across Clinical Dementia Rating (CDR stages until a sharp rise in CDR 3; adult child and sibling caregivers experience a gradual rise throughout the stages. Our results affirm the existence of WaP as a unique factor. Future research should explore the potential of WaP as a possible intervention target to improve self-efficacy in the milder stages of burden.

  3. Our experience of blood flow measurements using radioactive tracers

    International Nuclear Information System (INIS)

    Danet, Bernard.

    1974-01-01

    A critical study of blood flow measuring methods is proposed. After a review of the various diffusible and non-diffusible radioactive tracers and the corresponding detector systems, the principles which allow to measure blood flow from the data so obtained, are studied. There is a different principle of flow measurement for each type of tracer. The theory of flow measurement using non-diffusible tracers (human serum albumin labelled with 131 I or sup(99m)Tc, 113 In-labelled siderophiline) and its application to cardiac flow measurement are described first. Then the theory of flow measurement using diffusible tracers ( 133 Xe, 85 Kr) and its application to measurement of blood flow through tissues (muscles and kidney particularly) are described. A personal experience of this various flow measurements is reported. The results obtained, the difficulties encountered and the improvments proposed are developed [fr

  4. Student Academic Optimism: A Confirmatory Factor Analysis

    Science.gov (United States)

    Tschannen-Moran, Megan; Bankole, Regina A.; Mitchell, Roxanne M.; Moore, Dennis M., Jr.

    2013-01-01

    Purpose: This research aims to add to the literature on Academic Optimism, a composite measure composed of teacher perceptions of trust in students, academic press, and collective efficacy by exploring a similar set of constructs from the student perceptive. The relationships between student trust in teachers, student perceptions of academic…

  5. The PVLAS experiment for measuring the magnetic birefringence of vacuum

    International Nuclear Information System (INIS)

    Zavattini, G.; Gastaldi, U.; Messineo, G.; Piemontese, L.; Della Valle, F.; Milotti, E.; Pengo, R.; Ruoso, G.

    2013-01-01

    We describe the principle and status of the PVLAS experiment being prepared at the Department of Physics and INFN section in Ferrara, Italy. The goal of the experiment is to measure the magnetic birefringence of vacuum. This effect is directly connected to the vacuum QED structure and can be detected by measuring the ellipticity acquired by a linearly polarized laser beam traversing a strong magnetic field. Vacuum magnetic birefringence is predicted by the Euler- Heisenberg effective Lagrangian. The experimental method is also sensitive to new physics and could place new laboratory limits to hypothetical particles coupling to two photons, such as axion like particles, or millicharged particles.

  6. Measurement of Poloidal Velocity on the National Spherical Torus Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Ronald E. Bell and Russell Feder

    2010-06-04

    A diagnostic suite has been developed to measure impurity poloidal flow using charge exchange recombination spectroscopy on the National Spherical Torus Experiment. Toroidal and poloidal viewing systems measure all quantities required to determine the radial electric field. Two sets of up/down symmetric poloidal views are used to measure both active emission in the plane of the neutral heating beams and background emission in a radial plane away from the neutral beams. Differential velocity measurements isolate the line-integrated poloidal velocity from apparent flows due to the energy-dependent chargeexchange cross section. Six f/1.8 spectrometers measure 276 spectra to obtain 75 active and 63 background channels every 10 ms. Local measurements from a similar midplane toroidal viewing system are mapped into two dimensions to allow the inversion of poloidal line-integrated measurements to obtain local poloidal velocity profiles. Radial resolution after inversion is 0.6-1.8 cm from the plasma edge to the center.

  7. Measurement of Poloidal Velocity on the National Spherical Torus Experiment

    International Nuclear Information System (INIS)

    Bell, Ronald E.; Feder, Russell

    2010-01-01

    A diagnostic suite has been developed to measure impurity poloidal flow using charge exchange recombination spectroscopy on the National Spherical Torus Experiment. Toroidal and poloidal viewing systems measure all quantities required to determine the radial electric field. Two sets of up/down symmetric poloidal views are used to measure both active emission in the plane of the neutral heating beams and background emission in a radial plane away from the neutral beams. Differential velocity measurements isolate the line-integrated poloidal velocity from apparent flows due to the energy-dependent chargeexchange cross section. Six f/1.8 spectrometers measure 276 spectra to obtain 75 active and 63 background channels every 10 ms. Local measurements from a similar midplane toroidal viewing system are mapped into two dimensions to allow the inversion of poloidal line-integrated measurements to obtain local poloidal velocity profiles. Radial resolution after inversion is 0.6-1.8 cm from the plasma edge to the center.

  8. 75 FR 77675 - AREVA NP, Inc.; Confirmatory Order (Effective Immediately)

    Science.gov (United States)

    2010-12-13

    ... cause. VI Any person adversely affected by this Confirmatory Order, other than AREVA, may request a..., appropriate notification of regulatory authorities, safety culture and safety conscious work environment...., outside the global AREVA organization), safety culture assessment in accordance with an accepted nuclear...

  9. Confirmatory Factor Analysis of the Trinity Inventory of Precursors to Suicide (TIPS) and Its Relationship to Hopelessness and Depression

    Science.gov (United States)

    Smyth, Caroline L.; MacLachlan, Malcolm

    2005-01-01

    Numerous existing measures assess attitudes toward suicide yet fail to account for contextual factors. The Trinity Inventory of Precursors to Suicide (TIPS) is presented as an alternative, with implications for the development of prevention programs. Having previously reported exploratory analysis of the TIPS; confirmatory factor analysis and…

  10. Optimal Design of Experiments by Combining Coarse and Fine Measurements

    Science.gov (United States)

    Lee, Alpha A.; Brenner, Michael P.; Colwell, Lucy J.

    2017-11-01

    In many contexts, it is extremely costly to perform enough high-quality experimental measurements to accurately parametrize a predictive quantitative model. However, it is often much easier to carry out large numbers of experiments that indicate whether each sample is above or below a given threshold. Can many such categorical or "coarse" measurements be combined with a much smaller number of high-resolution or "fine" measurements to yield accurate models? Here, we demonstrate an intuitive strategy, inspired by statistical physics, wherein the coarse measurements are used to identify the salient features of the data, while the fine measurements determine the relative importance of these features. A linear model is inferred from the fine measurements, augmented by a quadratic term that captures the correlation structure of the coarse data. We illustrate our strategy by considering the problems of predicting the antimalarial potency and aqueous solubility of small organic molecules from their 2D molecular structure.

  11. Measuring the Pros and Cons of What It Means to Be a Black Man: Development and Validation of the Black Men's Experiences Scale (BMES).

    Science.gov (United States)

    Bowleg, Lisa; English, Devin; Del Rio-Gonzalez, Ana Maria; Burkholder, Gary J; Teti, Michelle; Tschann, Jeanne M

    2016-04-01

    Although extensive research documents that Black people in the U.S. frequently experience social discrimination, most of this research aggregates these experiences primarily or exclusively by race. Consequently, empirical gaps exist about the psychosocial costs and benefits of Black men's experiences at the intersection of race and gender. Informed by intersectionality, a theoretical framework that highlights how multiple social identities intersect to reflect interlocking social-structural inequality, this study addresses these gaps with the qualitative development and quantitative test of the Black Men's Experiences Scale (BMES). The BMES assesses Black men's negative experiences with overt discrimination and microaggressions, as well their positive evaluations of what it means to be Black men. First, we conducted focus groups and individual interviews with Black men to develop the BMES. Next, we tested the BMES with 578 predominantly low-income urban Black men between the ages of 18 and 44. Exploratory factor analysis suggested a 12-item, 3-factor solution that explained 63.7% of the variance. We labeled the subscales: Overt Discrimination, Microaggressions, and Positives: Black Men . Confirmatory factor analysis supported the three-factor solution. As hypothesized, the BMES's subscales correlated with measures of racial discrimination, depression, resilience, and social class at the neighborhood-level. Preliminary evidence suggests that the BMES is a reliable and valid measure of Black men's experiences at the intersection of race and gender.

  12. Health physics measurements of laser radiation: Experience and competence wanted

    International Nuclear Information System (INIS)

    Fischer, P.G.

    1998-01-01

    Measurement of the parameters required for an analysis of hazards involved is a complex task in terms of measuring techniques and calibration, and a costly procedure at that. Although part of the evaluation work can be done with the support of computers, evaluation and interpretation of measured information requires the experience and competence of the human expert. It is to be hoped that the computer industry will soon have developed turn-key solutions of universal applicability for analytical tasks of this kind, so that in the near future determination of the source terms, especially for LED or IRED radiation, will be an easy task. (orig./CB) [de

  13. A conceptual analysis of quantum zeno; paradox, measurement, and experiment

    International Nuclear Information System (INIS)

    Home, D.; Whitaker, M.A.

    1997-01-01

    Arguments on controversial points concerning quantum measurement theory and the quantum Zeno effect are presented. In particular it is argued that (1) the quantum Zeno effect is a genuine result of quantum theory and current quantum measurement theory, independent of the projection postulate; (2) the effect is of very general nature and rests on analogous arguments to those involved in Bell close-quote s theories; (3) the term open-quotes quantum Zeno effectclose quotes may usefully be restricted to experiments where a measuring device exerts a nonlocal negative-result effect on a microscopic system, mere inhibition of a transition by a directly interacting device not qualifying; (4) since no decay is truly exponential, theoretically all decay phenomena should exhibit the quantum Zeno effect under observation, continuous or discrete. A detailed study is made of the experiments claiming to demonstrate the effect; it is found that they do not meet our criterion above. copyright 1997 Academic Press, Inc

  14. Top Quark Properties Measurements with the ATLAS Experiment

    International Nuclear Information System (INIS)

    Quijada, J A Murillo

    2016-01-01

    Results on recent measurements of top quark properties with the ATLAS experiment at the European Laboratory, CERN, are shown. The measurements are performed using the full data set recorded during the LHC Run-I. The full data set consists of a collected integrated luminosities ∫Tdt of 4.6 fb -1 recorded at a proton-proton collision energy of √ s = 7 TeV and 20.3 fb -1 collected at 8 TeV. The mentioned top quark properties include: spin correlation, charge asymmetry, W-boson polarization, color flow, top mass and top width in events with a top and anti-top quark pair ( tt ). An introduction to the LHC and the ATLAS detector is included and latest main results from this experiment. The contents include the current world benchmark results for the different properties and plans for future measurements during the ongoing LHC Run-II. (paper)

  15. Surface deposition measurements of the TMI-2 gross decontamination experiment

    International Nuclear Information System (INIS)

    McIssac, C.V.; Hetzer, D.C.

    1982-01-01

    In order to measure the effectiveness of the gross decontamination experiment (principally a water spray technique) performed in the TMI-2 reactor building, the Technical Information and Examination Program's Radiation and Environment personnel made surface activity measurements before and after the experiment. In conjunction with surface sampling, thermoluminescent dosimeter (TLD) and gamma spectrometry measurements were also performed to distinguish between radiation fields and contamination. The surface sampler used to collect samples from external surfaces within the reactor building is a milling tool having four major components: a 1.27-cm constant-speed drill; a drill support assembly that allows setting sample penetration depth; filter cartridges for intake air purification and sample collection; and an air pump that forces air across the surface being sampled and through the sample filter cartridge

  16. Measurement of the neutrino velocity in OPERA experiment

    Energy Technology Data Exchange (ETDEWEB)

    Dracos, M., E-mail: marcos.dracos@in2p3.fr [IPHC, Université de Strasbourg, CNRS/IN2P3, F-67037 Strasbourg (France)

    2013-02-15

    The OPERA neutrino experiment has measured the neutrino velocity using the CERN CNGS beam over a baseline of 730 km. The measurement is based on data taken by OPERA in the years 2009, 2010, 2011. An arrival time of CNGS muon neutrinos with respect to the one computed assuming the speed of light in vacuum of (6.5±7.4(stat.){sub −8.0}{sup +8.3}(sys.))ns was measured corresponding to a relative difference of the muon neutrino velocity with respect to the speed of light (v−c)/c=(2.7±3.1(stat.){sub −3.3}{sup +3.4}(sys.))×10{sup −6}. During spring 2012 the CNGS provided during two weeks a short proton bunched beam dedicated to the neutrino velocity measurement. The OPERA neutrino experiment at the underground Gran Sasso Laboratory has measured the velocity of neutrinos with slightly modified setup compared to 2011 measurements. These modifications increased the timing accuracy and also fixed previous problems. The arrival time of CNGS muon neutrinos with respect to the one computed assuming the speed of light in vacuum has been found to be in agreement with the previous measurement. This result confirms the revised OPERA result and that indeed the neutrino anticipation announced in September 2011 was due to technical problems.

  17. Franck--Hertz experiment with higher excitation level measurements

    International Nuclear Information System (INIS)

    Liu, F.H.

    1987-01-01

    The measurement of the higher levels of 6 3 P 2 and 6 1 P 1 of the mercury atom in the Franck--Hertz experiment has been introduced into the junior and senior laboratory course by using a homemade tetrode Franck--Hertz tube. The main structure of the tube is described. The optimum operating conditions are in the temperature range between 130 and 150 0 C and the collector currents are of the order of 10 -9 A. The additional observations of the famous Franck--Hertz experiment in the laboratory course will give the students more familiarity with the quantum behavior of atoms

  18. Measuring Black men's police-based discrimination experiences: Development and validation of the Police and Law Enforcement (PLE) Scale.

    Science.gov (United States)

    English, Devin; Bowleg, Lisa; Del Río-González, Ana Maria; Tschann, Jeanne M; Agans, Robert P; Malebranche, David J

    2017-04-01

    Although social science research has examined police and law enforcement-perpetrated discrimination against Black men using policing statistics and implicit bias studies, there is little quantitative evidence detailing this phenomenon from the perspective of Black men. Consequently, there is a dearth of research detailing how Black men's perspectives on police and law enforcement-related stress predict negative physiological and psychological health outcomes. This study addresses these gaps with the qualitative development and quantitative test of the Police and Law Enforcement (PLE) Scale. In Study 1, we used thematic analysis on transcripts of individual qualitative interviews with 90 Black men to assess key themes and concepts and develop quantitative items. In Study 2, we used 2 focus groups comprised of 5 Black men each (n = 10), intensive cognitive interviewing with a separate sample of Black men (n = 15), and piloting with another sample of Black men (n = 13) to assess the ecological validity of the quantitative items. For Study 3, we analyzed data from a sample of 633 Black men between the ages of 18 and 65 to test the factor structure of the PLE, as we all as its concurrent validity and convergent/discriminant validity. Qualitative analyses and confirmatory factor analyses suggested that a 5-item, 1-factor measure appropriately represented respondents' experiences of police/law enforcement discrimination. As hypothesized, the PLE was positively associated with measures of racial discrimination and depressive symptoms. Preliminary evidence suggests that the PLE is a reliable and valid measure of Black men's experiences of discrimination with police/law enforcement. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  19. Thermal striping heat transfer measurements in sodium AKB experiments

    International Nuclear Information System (INIS)

    Sheriff, N.; Sephton, K.P.; Gleave, C.

    1988-01-01

    Temperature fluctuations are produced in the sodium flow of fast reactors where hot and cold flow streams mix. A sodium experiment mounted on the Interatom facility AKB has been used to measure the heat transfer conditions in a flow stream with typical temperature fluctuations. The measurements were made at locations near to the leading edge of a plate, where in practice the most severe conditions are expected. With tests carried out over a wide range of flows good correlations of the heat transfer data with flow have been obtained. A simple theoretical model is proposed to explain the magnitude of the measured heat transfer coefficients, and the use of reasonable assumptions in the model produce good agreement with the experimental measurements

  20. Experience from using plastic film in radon measurement

    International Nuclear Information System (INIS)

    Joensson, G.

    1999-01-01

    Plastic film is a useful detector of radon gas. The method of detection of the gas is used for several decades to measure radon concentrations both indoors and in soil. Experiences from radon measurements in Sweden indoors, in soil and in water using the plastic film Kodak LR 115-II are discussed in this report. Some examples are given from various projects. One example is taken from a large scale mapping of indoor radon levels in houses, where the building material is the main source of radon. In another example the measurements from a large scale soil radon mapping are discussed. The use of the plastic film for measurements of radon levels in water is also discussed. All the investigations are made in order to give the authorities concerned information of the radon situation and to study the connection between high indoor radon levels and various types of cancers

  1. Continuous measurements of nitrous oxide isotopomers during incubation experiments

    DEFF Research Database (Denmark)

    Winther, Malte Nordmann; Balslev-Harder, David; Christensen, Søren

    2016-01-01

    relevant for studies of atmospheric chemistry. We present results from continuous incubation experiments with denitrifying bacteria, Pseudomonas fluorescens (producing and reducing N2O) and P. chlororaphis (only producing N2O). The continuous position dependent measurements reveal the transient pattern....... fluorescens, the calculations results in SP values of −5.7 ‰ ± 5.6 during production of N2O and 2.3 ‰ ± 3.2 during reduction of N2O. In summary, we implemented continuous measurements of N2O isotopomers during incubation of denitrifying bacteria and believe that similar experiments will lead to a better...... understanding of denitrifying bacteria and N2O turnover in soils and sediments and ultimately hands-on knowledge on the biotic mechanisms behind greenhouse gas exchange of the Globe....

  2. arXiv Top quark measurements in the CMS experiment

    CERN Document Server

    INSPIRE-00102167

    2017-01-01

    Experimental results on top-quark physics obtained at the CMS experiment are reported based on the data recorded at centre-of-mass energy up to 13 TeV. Inclusive and differential cross sections for both top-quark pair and single top-quark production are presented, as well as measurements of top-quark properties in production and decay, and searches for anomalous couplings. The presented measurements test theoretical predictions, including recent perturbative QCD calculations, provide constraints of fundamental standard model parameters, and set limits on physics beyond the standard model.

  3. The spiritual experience index: A measure of spiritual maturity.

    Science.gov (United States)

    Genia, V

    1991-12-01

    The Spiritual Experience Index was developed to measure spiritual maturity in persons of diverse religious and spiritual beliefs. The scale was constructed from a developmental rather than a multidimensional conceptualization of faith. Initial findings from a religiously heterogeneous college sample indicated good reliability for the SEI and supported its use as a unidimensional measure. Higher scores on the SEI were significantly related to lower dogmatism and intolerance of ambiguity. The SEI was also moderately related to higher religious participation and positively correlated with intrinsicness and quest. However, compared with the intrinsic and quest scales, the SEI emerged as the strongest indicator of adaptive spiritual functioning. Directions for future research are suggested.

  4. Online radiation dose measurement system for ATLAS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Mandic, I.; Cindro, V.; Dolenc, I.; Gorisek, A.; Kramberger, G. [Jozef Stefan Institute, Jamova 39, Ljubljana (Slovenia); Mikuz, M. [Jozef Stefan Institute, Jamova 39, Ljubljana (Slovenia); Faculty of Mathematics and Physics, University of Ljubljana (Slovenia); Bronner, J.; Hartet, J. [Physikalisches Institut, Universitat Freiburg, Hermann-Herder-Str. 3, Freiburg (Germany); Franz, S. [CERN, Geneva (Switzerland)

    2009-07-01

    In experiments at Large Hadron Collider, detectors and electronics will be exposed to high fluxes of photons, charged particles and neutrons. Damage caused by the radiation will influence performance of detectors. It will therefore be important to continuously monitor the radiation dose in order to follow the level of degradation of detectors and electronics and to correctly predict future radiation damage. A system for online radiation monitoring using semiconductor radiation sensors at large number of locations has been installed in the ATLAS experiment. Ionizing dose in SiO{sub 2} will be measured with RadFETs, displacement damage in silicon in units of 1-MeV(Si) equivalent neutron fluence with p-i-n diodes. At 14 monitoring locations where highest radiation levels are expected the fluence of thermal neutrons will be measured from current gain degradation in dedicated bipolar transistors. The design of the system and tests of its performance in mixed radiation field is described in this paper. First results from this test campaign confirm that doses can be measured with sufficient sensitivity (mGy for total ionizing dose measurements, 10{sup 9} n/cm{sup 2} for NIEL (non-ionizing energy loss) measurements, 10{sup 12} n/cm{sup 2} for thermal neutrons) and accuracy (about 20%) for usage in the ATLAS detector

  5. Online radiation dose measurement system for ATLAS experiment

    International Nuclear Information System (INIS)

    Mandic, I.; Cindro, V.; Dolenc, I.; Gorisek, A.; Kramberger, G.; Mikuz, M.; Bronner, J.; Hartet, J.; Franz, S.

    2009-01-01

    In experiments at Large Hadron Collider, detectors and electronics will be exposed to high fluxes of photons, charged particles and neutrons. Damage caused by the radiation will influence performance of detectors. It will therefore be important to continuously monitor the radiation dose in order to follow the level of degradation of detectors and electronics and to correctly predict future radiation damage. A system for online radiation monitoring using semiconductor radiation sensors at large number of locations has been installed in the ATLAS experiment. Ionizing dose in SiO 2 will be measured with RadFETs, displacement damage in silicon in units of 1-MeV(Si) equivalent neutron fluence with p-i-n diodes. At 14 monitoring locations where highest radiation levels are expected the fluence of thermal neutrons will be measured from current gain degradation in dedicated bipolar transistors. The design of the system and tests of its performance in mixed radiation field is described in this paper. First results from this test campaign confirm that doses can be measured with sufficient sensitivity (mGy for total ionizing dose measurements, 10 9 n/cm 2 for NIEL (non-ionizing energy loss) measurements, 10 12 n/cm 2 for thermal neutrons) and accuracy (about 20%) for usage in the ATLAS detector

  6. Comparing the lived experience to objective measures of Accessibility

    OpenAIRE

    Angela Curl; John Nelson; Jillian Anable

    2011-01-01

    This paper presents work undertaken to date as part of PhD research into the process of Accessibility Planning in the UK and how existing objective measures of accessibility relate to individual perceptions or the "lived experience" of accessibility. Since 1997, Accessibility has been framed in the social exclusion context within UK transport planning and policy, focusing on the ability of people to participate fully in society, which is seen as being limited by poor accessibility. This appro...

  7. Selected Measurements of Rare Decays at the LHCb Experiment

    CERN Document Server

    Pikies, Malgorzata

    2016-01-01

    Experimental results of rare decays B$^0$$\\to K*^0\\mu\\mu$, B$^0 \\to K*^0$ee, $\\Lambda_b\\to\\Lambda\\mu\\mu$ and B$^0_s$ governed by Flavour Changing Neutral Current transitions are discussed in this paper. The angular distributions and differential branching fractions measurements were performed using data corresponding to an integrated luminosity of 3:0 fb$^{-1}$ collected at the LHCb experiment.

  8. Confirmatory factory analysis of the Neck Disability Index in a general problematic neck population indicates a one-factor model.

    Science.gov (United States)

    Gabel, Charles Philip; Cuesta-Vargas, Antonio I; Osborne, Jason W; Burkett, Brendan; Melloh, Markus

    2014-08-01

    The Neck Disability Index frequently is used to measure outcomes of the neck. The statistical rigor of the Neck Disability Index has been assessed with conflicting outcomes. To date, Confirmatory Factor Analysis of the Neck Disability Index has not been reported for a suitably large population study. Because the Neck Disability Index is not a condition-specific measure of neck function, initial Confirmatory Factor Analysis should consider problematic neck patients as a homogenous group. We sought to analyze the factor structure of the Neck Disability Index through Confirmatory Factor Analysis in a symptomatic, homogeneous, neck population, with respect to pooled populations and gender subgroups. This was a secondary analysis of pooled data. A total of 1,278 symptomatic neck patients (67.5% female, median age 41 years), 803 nonspecific and 475 with whiplash-associated disorder. The Neck Disability Index was used to measure outcomes. We analyzed pooled baseline data from six independent studies of patients with neck problems who completed Neck Disability Index questionnaires at baseline. The Confirmatory Factor Analysis was considered in three scenarios: the full sample and separate sexes. Models were compared empirically for best fit. Two-factor models have good psychometric properties across both the pooled and sex subgroups. However, according to these analyses, the one-factor solution is preferable from both a statistical perspective and parsimony. The two-factor model was close to significant for the male subgroup (pfactor structure when analyzed by Confirmatory Factor Analysis in a pooled, homogenous sample of neck problem patients. However, a two-factor model did approach significance for male subjects where questions separated into constructs of mental and physical function. Further investigations in different conditions, subgroup and sex-specific populations are warranted. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. 10 CFR 26.101 - Conducting a confirmatory test for alcohol.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Conducting a confirmatory test for alcohol. 26.101 Section... Testing § 26.101 Conducting a confirmatory test for alcohol. (a) The confirmatory test must begin as soon... that meets the requirements of § 26.91(b) and (c) was used for the initial alcohol test, the same EBT...

  10. Real-time measurement and control at Jet. Experiment Control

    International Nuclear Information System (INIS)

    Felton, R.; Zabeo, L.; Sartori, F.; Piccolo, F.; Farthing, J.; Budd, T.; Dorling, S.; McCullen, P.; Harling, J.; Dalley, S.; Goodyear, A.; Stephen, A.; Card, P.; Bright, M.; Lucock, R.; Jones, E.; Griph, S.; Hogben, C.; Beldishevski, M.; Buckley, M.; Davis, J.; Young, I.; Hemming, O.; Wheatley, M.; Heesterman, P.; Lloyd, G.; Walters, M.; Bridge, R.; Leggate, H.; Howell, D.; Zastrow, K.D.; Giroud, C.; Coffey, I.; Hawkes, N.; Stamp, M.; Barnsley, R.; Edlington, T.; Guenther, K.; Gowers, C.; Popovichef, S.; Huber, A.; Ingesson, C.; Joffrin, E.; Mazon, D.; Moreau, D.; Murari, A.; Riva, M.; Barana, O.; Bolzonella, T.; Valisa, M.; Innocente, P.; Zerbini, M.; Bosak, K.; Blum, J.; Vitale, E.; Crisanti, F.; La Luna, E. de; Sanchez, J.

    2004-01-01

    Over the past few ears, the preparation of ITER-relevant plasma scenarios has been the main focus experimental activity on tokamaks. The development of integrated, simultaneous, real-time controls of plasma shape, current, pressure, temperature, radiation, neutron profiles, and also impurities, ELMs (edge localized modes) and MHD are now seen to be essential for further development of quasi-steady state conditions with feedback, or the stabilisation of transient phenomena with event-driven actions. For this thrust, the EFDA JET Real Time Project has developed a set of real-time plasma measurements, experiment control, and communication facilities. The Plasma Diagnostics used for real-time experiments are Far Infra Red interferometry, polarimetry, visible, UV and X-ray spectroscopy, LIDAR, bolometry, neutron and magnetics. Further analysis systems produce integrated results such as temperature profiles on geometry derived from MHD equilibrium solutions. The Actuators include toroidal, poloidal and divertor coils, gas and pellet fuelling, neutral beam injection, radiofrequency (ICRH) waves and microwaves (LH). The Heating/Fuelling Operators can either define a power or gas request waveform or select the real-time instantaneous power/gas request from the Real Time Experiment Central Control (RTCC) system. The Real Time Experiment Control system provides both a high-level, control-programming environment and interlocks with the actuators. A MATLAB facility is being developed for the development of more complex controllers. The plasma measurement, controller and plant control systems communicate in ATM network. The EFDA Real Time project is essential groundwork for future reactors such as ITER. It involves many staff from several institutions. The facility is now frequently used in experiments. (authors)

  11. Measurement of electron neutrino appearance with the MINOS experiment

    International Nuclear Information System (INIS)

    Boehm, Joshua Adam Alpern

    2009-01-01

    MINOS is a long-baseline two-detector neutrino oscillation experiment that uses a high intensity muon neutrino beam to investigate the phenomena of neutrino oscillations. By measuring the neutrino interactions in a detector near the neutrino source and again 735 km away from the production site, it is possible to probe the parameters governing neutrino oscillation. The majority of the ν μ oscillate to ν τ but a small fraction may oscillate instead to ν e . This thesis presents a measurement of the ν e appearance rate in the MINOS far detector using the first two years of exposure. Methods for constraining the far detector backgrounds using the near detector measurements is discussed and a technique for estimating the uncertainty on the background and signal selection are developed. A 1.6σ excess over the expected background rate is found providing a hint of ν e appearance.

  12. Methodology for measurement in schools and kindergartens: experiences

    International Nuclear Information System (INIS)

    Fotjikova, I.; Navratilova Rovenska, K.

    2015-01-01

    In more than 1500 schools and preschool facilities, long-term radon measurement was carried out in the last 3 y. The negative effect of thermal retrofitting on the resulting long-term radon averages is evident. In some of the facilities, low ventilation rates and correspondingly high radon levels were found, so it was recommended to change ventilation habits. However, some of the facilities had high radon levels due to its ingress from soil gas. Technical measures should be undertaken to reduce radon exposure in this case. The paper presents the long-term experiences with the two-stage measurement methodology for investigation of radon levels in school and preschool facilities and its possible improvements. (authors)

  13. Viscosity Measurement: A Virtual Experiment - Abstract of Issues 9907W

    Science.gov (United States)

    Papadopoulos, N.; Pitta, A. T.; Markopoulos, N.; Limniou, M.; Lemos, M. A. N. D. A.; Lemos, F.; Freire, F. G.

    1999-11-01

    Viscosity Measurement: A Virtual Experiment simulates a series of viscosity experiments. Viscosity is an important subject in chemistry and chemical engineering. It is important when dealing with intermolecular forces in liquids and gases and it has enormous relevance in all technological aspects of equipment dealing with liquids or gases. Most university-level chemistry courses include viscosity to some extent. Viscosity Measurement includes three virtual experiments: an Ostwald viscometer simulator, a falling-ball viscometer simulator, and a balance simulator for a simple determination of the density of a liquid. The Ostwald viscometer simulator and the balance simulator allow the student to find out how composition and temperature influence the density and viscosity of an ethanol-water mixture. The falling-ball viscometer simulator allows the student to determine experimentally the size and density of the ball required to measure viscosity of various liquids. Each virtual experiment includes a corresponding theoretical section. Support from the program is sufficient to enable the students to carry out a virtual experiment sensibly and on their own. Preparation is not essential. Students can use the program unsupervised, thus saving staff time and allowing flexibility in students' time. The design of the program interface plays a key role in the success of a simulated experiment. Direct manipulation has greater intuitive appeal than alternative interface forms such as menus and has been observed to provide performance and learning advantages (1). We tried to design an interface that is visually attractive, is user friendly with simple and intuitive navigation, and provides appropriate schematic animations to clarify the principles of the laboratory procedures. The opening screen presents the virtual experiments that can be selected. Clicking an icon takes the student to the appropriate section. Viscosity Measurement allows the student to concentrate on the

  14. Spectral emission measurements of lithium on the lithium tokamak experiment

    Energy Technology Data Exchange (ETDEWEB)

    Gray, T. K.; Biewer, T. M.; Maingi, R. [Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Boyle, D. P.; Granstedt, E. M.; Kaita, R.; Majeski, R. P. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)

    2012-10-15

    There has been a long-standing collaboration between ORNL and PPPL on edge and boundary layer physics. As part of this collaboration, ORNL has a large role in the instrumentation and interpretation of edge physics in the lithium tokamak experiment (LTX). In particular, a charge exchange recombination spectroscopy (CHERS) diagnostic is being designed and undergoing staged testing on LTX. Here we present results of passively measured lithium emission at 5166.89 A in LTX in anticipation of active spectroscopy measurements, which will be enabled by the installation of a neutral beam in 2013. Preliminary measurements are made in transient LTX plasmas with plasma current, I{sub p} < 70 kA, ohmic heating power, P{sub oh}{approx} 0.3 MW and discharge lifetimes of 10-15 ms. Measurements are made with a short focal length spectrometer and optics similar to the CHERS diagnostics on NSTX [R. E. Bell, Rev. Sci. Instrum. 68(2), 1273-1280 (1997)]. These preliminary measurements suggest that even without the neutral beam for active spectroscopy, there is sufficient passive lithium emission to allow for line-of-sight profile measurements of ion temperature, T{sub i}; toroidal velocity and v{sub t}. Results show peak T{sub i} = 70 eV and peak v{sub t} = 45 km/s were reached 10 ms into the discharge.

  15. Nuclear abundance measurements inside MIR and ISS with Sileye experiments

    Science.gov (United States)

    Casolino, M.

    In this work we present measurements of cosmic ray nuclear abundances above 150 MeV/n performed inside Mir space station between 1998 and 2000. Data have been obtained with SilEye-2 detector, a 6 plane silicon strip detector telescope designed to measure environmental radiation and investigate on the Light Flash phenomenon. In standalone mode, SilEye-2 is capable to measure LET distribution spectra and identify nuclear species with energy above 100 MeV/n: a total of 100 sessions comprising more than 1000 hours of observation were perfomed in the years 1998-2000, recording also several Solar Energetic Particle (SEP) events. Cosmic ray abundances inside a spacecraft can differ from the primary component due to interaction with the interposed material of the hull and the instruments. We report on LET measurements and relative abundances from Boron to Iron measured in different regions and at different geomagnetic cutoffs, in solar quiet conditions and during SEP events, showing how the composition varies in these different situations. We also report on preliminary results on cosmic ray measurements inside ISS (27/4/2002 - 4/5/2002) obtained with Sileye-3/Alteino experiment.

  16. Dementia knowledge assessment scale (DKAS): confirmatory factor analysis and comparative subscale scores among an international cohort.

    Science.gov (United States)

    Annear, Michael J; Toye, Chris; Elliott, Kate-Ellen J; McInerney, Frances; Eccleston, Claire; Robinson, Andrew

    2017-07-31

    Dementia is a life-limiting condition that is increasing in global prevalence in line with population ageing. In this context, it is necessary to accurately measure dementia knowledge across a spectrum of health professional and lay populations with the aim of informing targeted educational interventions and improving literacy, care, and support. Building on prior exploratory analysis, which informed the development of the preliminarily valid and reliable version of the Dementia Knowledge Assessment Scale (DKAS), a Confirmatory Factor Analysis (CFA) was performed to affirm construct validity and proposed subscales to further increase the measure's utility for academics and educators. A large, de novo sample of 3649 volunteer respondents to a dementia-related online course was recruited to evaluate the performance of the DKAS and its proposed subscales. Respondents represented diverse cohorts, including health professionals, students, and members of the general public. Analyses included CFA (using structural equation modelling), measures of internal consistency (α), and non-parametric tests of subscale correlation (Spearman Correlation) and score differences between cohorts (Kruskal-Wallis one-way analysis of variance). Findings of the CFA supported a 25-item, four-factor model for the DKAS with two items removed due to poor performance and one item moved between factors. The resultant model exhibited good reliability (α = .85; ω h  = .87; overall scale), with acceptable subscale internal consistency (α ≥ .65; subscales). Subscales showed acceptable correlation without any indication of redundancy. Finally, total and DKAS subscale scores showed good discrimination between cohorts of respondents who would be anticipated to hold different levels of knowledge on the basis of education or experience related to dementia. The DKAS has been confirmed as a reliable and valid measure of dementia knowledge for diverse populations that is capable of elucidating

  17. Does the Factor Structure of Military Sexual Stressors in Men Correspond to Women's? A Confirmatory Factor Analysis Using the Sexual Harassment Inventory.

    Science.gov (United States)

    Reddy, Madhavi K; Murdoch, Maureen

    2016-02-01

    Unwanted sexual stressors experienced by military men and women are associated with a host of negative physical and mental health problems. Government officials are making it a priority to put a stop to these unwanted sexual experiences. However, the measure typically used measures sexual stressors much better for women than for men. The purpose of the present study was to test the factor structure of an alternative measure, the Sexual Harassment Inventory (SHI), to examine whether sexual stressors experienced by men correspond to women's experiences. We used three preexisting datasets in which the SHI was used to assess active and former military members' sexual stressor experiences. We conducted an exploratory factor analysis to identify women's response patterns and a confirmatory factor analysis to determine whether men's response patterns corresponded to women's. Findings showed that the SHI has evidence of factorial validity in female service members and adequate, but not exceptional, factorial fit for male service members. It is imperative that more work be done to better understand how men experience and perceive potential military sexual stressors and how those perceptions and experiences compare to women's. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

  18. Chained Bell Inequality Experiment with High-Efficiency Measurements

    Science.gov (United States)

    Tan, T. R.; Wan, Y.; Erickson, S.; Bierhorst, P.; Kienzler, D.; Glancy, S.; Knill, E.; Leibfried, D.; Wineland, D. J.

    2017-03-01

    We report correlation measurements on two 9Be+ ions that violate a chained Bell inequality obeyed by any local-realistic theory. The correlations can be modeled as derived from a mixture of a local-realistic probabilistic distribution and a distribution that violates the inequality. A statistical framework is formulated to quantify the local-realistic fraction allowable in the observed distribution without the fair-sampling or independent-and-identical-distributions assumptions. We exclude models of our experiment whose local-realistic fraction is above 0.327 at the 95% confidence level. This bound is significantly lower than 0.586, the minimum fraction derived from a perfect Clauser-Horne-Shimony-Holt inequality experiment. Furthermore, our data provide a device-independent certification of the deterministically created Bell states.

  19. Time of flight measurement on the SOFIA experiment

    International Nuclear Information System (INIS)

    Bail, A.; Taieb, J.; Chatillon, A.; Belier, G.; Laurent, B.; Pellereau, E.

    2011-01-01

    The SOFIA experiment, which will be held at GSI (Darmstadt (Germany)) will allow to completely determine the mass and charge numbers of fragments produced in the fission reaction of radioactive actinides in reverse kinematics. Therefore, a dedicated setup has been developed for the Time of Flight measurement of relativistic heavy ions. The studies, which led to the choice of the adequate plastic scintillators and photomultipliers, are presented. Tests have been undertaken with the ELSA laser and electron beam facility. They shown that a suitable choice would be EJ-232 plastic scintillator for the ToF wall and EJ-232Q for the start detector and Hamamatsu H6533 and H10580 photomultipliers. This was confirmed by two test experiments realized at GSI with relativistic heavy ion beam ( 56 Fe and 238 U), where a time of flight resolution better than 20 ps FWHM was reached. (authors)

  20. Time of flight measurement on the SOFIA experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bail, A.; Taieb, J.; Chatillon, A.; Belier, G.; Laurent, B.; Pellereau, E. [CEA/DAM/DIF, Arpajon (France)

    2011-07-01

    The SOFIA experiment, which will be held at GSI (Darmstadt (Germany)) will allow to completely determine the mass and charge numbers of fragments produced in the fission reaction of radioactive actinides in reverse kinematics. Therefore, a dedicated setup has been developed for the Time of Flight measurement of relativistic heavy ions. The studies, which led to the choice of the adequate plastic scintillators and photomultipliers, are presented. Tests have been undertaken with the ELSA laser and electron beam facility. They shown that a suitable choice would be EJ-232 plastic scintillator for the ToF wall and EJ-232Q for the start detector and Hamamatsu H6533 and H10580 photomultipliers. This was confirmed by two test experiments realized at GSI with relativistic heavy ion beam ({sup 56}Fe and {sup 238}U), where a time of flight resolution better than 20 ps FWHM was reached. (authors)

  1. Measuring mixing efficiency in experiments of strongly stratified turbulence

    Science.gov (United States)

    Augier, P.; Campagne, A.; Valran, T.; Calpe Linares, M.; Mohanan, A. V.; Micard, D.; Viboud, S.; Segalini, A.; Mordant, N.; Sommeria, J.; Lindborg, E.

    2017-12-01

    Oceanic and atmospheric models need better parameterization of the mixing efficiency. Therefore, we need to measure this quantity for flows representative of geophysical flows, both in terms of types of flows (with vortices and/or waves) and of dynamical regimes. In order to reach sufficiently large Reynolds number for strongly stratified flows, experiments for which salt is used to produce the stratification have to be carried out in a large rotating platform of at least 10-meter diameter.We present new experiments done in summer 2017 to study experimentally strongly stratified turbulence and mixing efficiency in the Coriolis platform. The flow is forced by a slow periodic movement of an array of large vertical or horizontal cylinders. The velocity field is measured by 3D-2C scanned horizontal particles image velocimetry (PIV) and 2D vertical PIV. Six density-temperature probes are used to measure vertical and horizontal profiles and signals at fixed positions.We will show how we rely heavily on open-science methods for this study. Our new results on the mixing efficiency will be presented and discussed in terms of mixing parameterization.

  2. A unique experiment. Measurement of radiation doses at Vinca

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-07-15

    For the first time in the history of the peaceful applications of atomic energy, an experiment was conducted to determine the exact levels of radiation exposure resulting from a reactor incident. The experiment was made at Vinca, Yugoslavia, wherein October 1958 six persons had been subjected to high doses of neutron and gamma radiation during a brief uncontrolled run of a zero-power reactor. One of them died but the other five were successfully treated at the Curie Hospital in Paris. In the case of four of them, the treatment involved the grafting of healthy bone marrow to counteract the effects of radiation on blood-forming tissues. It was recognized that if the effects produced on the irradiated persons could be related to the exact doses of radiation they had received, it would be possible to gain immensely valuable knowledge about the biological consequences of acute and high level radiation exposure on a quantitative basis. It was suggested to the Yugoslav authorities that a dosimetry experiment be conducted at Vinca. The most accurate modern techniques of dosimetry developed at the Oak Ridge National Laboratory were employed during the experiment. Simultaneous measurements of the neutron and gamma doses were made at points where the people had been located. At these points the effects of the radiation on the salt solution in the phantoms were studied. In particular, the energy distribution of the radiation was investigated.It was the ratio between the various components of the radiation that was of special interest in these measurements because this ratio itself would help in determining the exact doses. The dose of one of the components, viz. slow neutrons, had already been determined during the treatment of the patients. If the ratio of the components could be ascertained, the doses of the fast neutrons and gamma rays could also be established because the ratio would not be affected by the power level at which the reactor was operated

  3. Psychometric properties and relations with coping and family strain of the Health Services and Caregiver Experience questionnaire (HSCE): an outcome measure of informal caregivers' experience for inpatient care in Italy.

    Science.gov (United States)

    Coluccia, Anna; Ferretti, Fabio; Fagiolini, Andrea; Pozza, Andrea

    2017-07-17

    In the last decade, the number of patients supported by informal caregivers has substantially increased. In the Italian healthcare context, informal caregivers' experience of care is a new under-recognized construct, and no assessment tool is available. Measuring caregivers' experience is important since in Italy the relationship between doctors and patients/relatives is still considered asymmetrical. The current study presented development and initial psychometric properties of the Health Services and Caregiver Experience questionnaire (HSCE), a self-report tool of caregivers' global experience for inpatient clinical care, including factor structure, reliability and its relations with measures of coping strategies and family strain. The HSCE was administered to a total of 503 informal caregivers of inpatients admitted at an Italian University Hospital (mean age = 48.08 years, SD = 14.82, females = 61.40%). Family Strain Questionnaire-Short Form (FSQ-SF) and Coping Orientations to Problems Experience-New Italian Version (COPE-NVI) were administered to a subgroup of participants. First-grade relatives were 73.10%, whereas 13.20% were second-grade relatives and 13.70% were home-watch caregivers. Exploratory and confirmatory factor analyses showed a structure with a single factor, which explained 64.80% of the total variance. All the items had salient loadings. In the two subsamples, HSCE had excellent internal consistency (Cronbach's alpha = 0.95-0.97). Positive moderate correlations were found between HSCE and FSQ-SF scores (r = 0.45, p caregivers' experience correlated with stronger family strain but also with better problem solving and social support. The study expanded knowledge on caregiver's experience in Italy and indicated that HSCE is a valid and reliable tool to measure this under-recognized construct in Italy.

  4. Precision measurements on trapped antihydrogen in the ALPHA experiment

    Science.gov (United States)

    Eriksson, S.

    2018-03-01

    Both the 1S-2S transition and the ground state hyperfine spectrum have been observed in trapped antihydrogen. The former constitutes the first observation of resonant interaction of light with an anti-atom, and the latter is the first detailed measurement of a spectral feature in antihydrogen. Owing to the narrow intrinsic linewidth of the 1S-2S transition and use of two-photon laser excitation, the transition energy can be precisely determined in both hydrogen and antihydrogen, allowing a direct comparison as a test of fundamental symmetry. The result is consistent with CPT invariance at a relative precision of around 2×10-10. This constitutes the most precise measurement of a property of antihydrogen. The hyperfine spectrum of antihydrogen is determined to a relative uncertainty of 4×10-4. The excited state and the hyperfine spectroscopy techniques currently both show sensitivity at the few 100 kHz level on the absolute scale. Here, the most recent work of the ALPHA collaboration on precision spectroscopy of antihydrogen is presented together with an outlook on improving the precision of measurements involving lasers and microwave radiation. Prospects of measuring the Lamb shift and determining the antiproton charge radius in trapped antihydrogen in the ALPHA apparatus are presented. Future perspectives of precision measurements of trapped antihydrogen in the ALPHA apparatus when the ELENA facility becomes available to experiments at CERN are discussed. This article is part of the Theo Murphy meeting issue `Antiproton physics in the ELENA era'.

  5. Investigating ethnic variations in reporting of psychotic symptoms: a multiple-group confirmatory factor analysis of the Psychosis Screening Questionnaire.

    Science.gov (United States)

    Heuvelman, Hein; Nazroo, James; Rai, Dheeraj

    2018-03-12

    Epidemiological evidence suggests risk for psychosis varies with ethnicity in Western countries. However, there is little evidence to date on the cross-cultural validity of screening instruments used for such comparisons. Combining two existing UK population-based cohorts, we examined risk for reporting psychotic symptoms across White British (n = 3467), White Irish (n = 851), Caribbean (n = 1899), Indian (n = 2590), Pakistani (n = 1956) and Bangladeshi groups (n = 1248). We assessed the psychometric properties of the Psychosis Screening Questionnaire (PSQ) with a multiple-group confirmatory factor analysis, assessing the equivalence of factor loadings, response thresholds and residual variances in an analysis of measurement non-invariance. Compared with prevalence among British Whites (5.4%), the prevalence of self-reported psychotic symptoms was greater in the Caribbean group (12.7%, adjusted OR = 2.38 [95% CI 1.84-3.07]). Prevalence was also increased among Pakistani individuals (8.3%, adjusted OR = 1.36 [1.01-1.84]) although this difference was driven by a greater likelihood of reporting paranoid symptoms. PSQ items for thought interference, strange experience and hallucination were measured in equivalent ways across ethnic groups. However, our measurement models suggested that paranoid symptoms were measured less reliably among ethnic minorities than among British Whites and appeared to exaggerate latent differences between Pakistani and White British groups when measurement non-invariance was not accounted for. Notwithstanding evidence for measurement non-invariance, the greater risk for reporting psychotic symptoms among Caribbean individuals is unlikely to be an artefact of measurement. Greater residual variance in the recording of paranoid symptoms among ethnic minority respondents warrants caution in using this item to investigate ethnic variation in psychosis risk.

  6. FNR demonstration experiments Part II: Subcadmium neutron flux measurements

    International Nuclear Information System (INIS)

    Wehe, D.K.; King, J.S.

    1983-01-01

    The FNR HEU-LEU Demonstration Experiments include a comprehensive set of experiments to identify and quantify significant operational differences between two nuclear fuel enrichments. One aspect of these measurements, the subcadmium flux profiling, is the subject of this paper. The flux profiling effort has been accomplished through foil and wire activations, and by rhodium self-powered neutron detector (SPND) mappings. Within the experimental limitations discussed, the program to measure subcadmium flux profiles, lead to the following conclusions: (1) Replacement of a single fresh HEU element by a fresh LEU element at the center of an equilibrium HEU core produces a local flux depression. The ratio of HEU to LEU local flux is 1.19 ± .036, which is, well within experimental uncertainty, equal to the inverse of the U-235 masses for the two elements. (2) Whole core replacement of a large 38 element equilibrium HEU core by a fresh or nearly unburned LEU core reduces the core flux and raises the flux in both D 2 O and H 2 O reflectors. The reduction in the central core region is 40% to 10.0% for the small fresh 29 element LEU core, and 16% to 18% for a 31 element LEU core 482) with low average burnup 2 O reflector fluxes relative to core fluxes as measured by SPND with a fixed value of sensitivity, are in gross disagreement with the same flux ratios measured by Fe and Rh wire activations. Space dependent refinements of S are calculated to give some improvement in the discrepancy but the major part of the correction remains to be resolved

  7. Designing an experiment to measure cellular interaction forces

    Science.gov (United States)

    McAlinden, Niall; Glass, David G.; Millington, Owain R.; Wright, Amanda J.

    2013-09-01

    Optical trapping is a powerful tool in Life Science research and is becoming common place in many microscopy laboratories and facilities. The force applied by the laser beam on the trapped object can be accurately determined allowing any external forces acting on the trapped object to be deduced. We aim to design a series of experiments that use an optical trap to measure and quantify the interaction force between immune cells. In order to cause minimum perturbation to the sample we plan to directly trap T cells and remove the need to introduce exogenous beads to the sample. This poses a series of challenges and raises questions that need to be answered in order to design a set of effect end-point experiments. A typical cell is large compared to the beads normally trapped and highly non-uniform - can we reliably trap such objects and prevent them from rolling and re-orientating? In this paper we show how a spatial light modulator can produce a triple-spot trap, as opposed to a single-spot trap, giving complete control over the object's orientation and preventing it from rolling due, for example, to Brownian motion. To use an optical trap as a force transducer to measure an external force you must first have a reliably calibrated system. The optical trapping force is typically measured using either the theory of equipartition and observing the Brownian motion of the trapped object or using an escape force method, e.g. the viscous drag force method. In this paper we examine the relationship between force and displacement, as well as measuring the maximum displacement from equilibrium position before an object falls out of the trap, hence determining the conditions under which the different calibration methods should be applied.

  8. A confirmatory factor analysis of the Utrecht Work Engagement Scale for Students in a Chinese sample.

    Science.gov (United States)

    Meng, Lina; Jin, Yi

    2017-02-01

    Educational institutions play an important role in encouraging students' engagement with course work. Educators are finding instruments to measure students' engagement in order to develop strategies to improve it. Little is known about the factor structure of the Utrecht Work Engagement Scale for Students among Chinese nursing students. The aim of this research was to examine the factor structure of the Utrecht Work Engagement Scale for Students via confirmatory factor analysis. The study used a cross-sectional design. A sample of 480 students from a nursing school in one Chinese university completed the Utrecht Work Engagement Scale for Students. Factor analysis was used to analyze the resulting data. The overall results of internal consistency reliability and confirmatory factor analysis provided evidence supporting the reliability and three-factor structure of the Utrecht Work Engagement Scale for Students. The total internal consistency reliability coefficients were 0.91. Model comparison tests indicated that an oblique factors model that permitted correlations between pairs of error terms fitted the data better than other first-order models. In addition, due to the three strongly intercorrelated factors, a second-order model was found to fit the data well, providing support for the factorial structure of the Utrecht Work Engagement Scale for Students. The findings of confirmatory factor analysis provided evidence supporting the reliability and three-factor structure of the Utrecht Work Engagement Scale for Students when evaluated with a Chinese nursing student sample in this study. Thus, it is appropriate to use The Utrecht Work Engagement Scale for Students in for assessing the engagement among Chinese nursing students. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Confirmatory factor analysis and recommendations for improvement of the Autonomy-Preference-Index (API).

    Science.gov (United States)

    Simon, Daniela; Kriston, Levente; Loh, Andreas; Spies, Claudia; Scheibler, Fueloep; Wills, Celia; Härter, Martin

    2010-09-01

    Validation of the German version of the Autonomy-Preference-Index (API), a measure of patients' preferences for decision making and information seeking. Stepwise confirmatory factor analysis was conducted on a sample of patients (n = 1592) treated in primary care for depression (n = 186), surgical and internal medicine inpatients (n = 811) and patients with minor trauma treated in an emergency department (n = 595). An initial test of the model was done on calculation and validation halves of the sample. Both local and global indexes-of-fit suggested modifications to the scale. The scale was modified and re-tested in the calculation sample and confirmed in the validation sample. Subgroup analyses for age, gender and type of treatment setting were also performed. The confirmatory analysis led to a modified version of the API with better local and global indexes-of-fit for samples of German-speaking patients. Two items of the sub-scale, 'preference for decision-making', and one item of the sub-scale, 'preference for information seeking', showed very low reliability scores and were deleted. Thus, several global indexes-of-fit clearly improved significantly. The modified scale was confirmed on the validation sample with acceptable to good indices of fit. Results of subgroup analyses indicated that no adaptations were necessary. This first confirmatory analysis for a German-speaking population showed that the API was improved by the removal of several items. There were theoretically plausible explanations for this improvement suggesting that the modifications might also be appropriate in English and other language versions.

  10. Health Services OutPatient Experience questionnaire: factorial validity and reliability of a patient-centered outcome measure for outpatient settings in Italy

    Directory of Open Access Journals (Sweden)

    Coluccia A

    2014-09-01

    Full Text Available Anna Coluccia, Fabio Ferretti, Andrea PozzaDepartment of Medical Sciences, Surgery and Neurosciences, Santa Maria alle Scotte University Hospital, University of Siena, Siena, ItalyPurpose: The patient-centered approach to health care does not seem to be sufficiently developed in the Italian context, and is still characterized by the biomedical model. In addition, there is a lack of validated outcome measures to assess outpatient experience as an aspect common to a variety of settings. The current study aimed to evaluate the factorial validity, reliability, and invariance across sex of the Health Services OutPatient Experience (HSOPE questionnaire, a short ten-item measure of patient-centeredness for Italian adult outpatients. The rationale for unidimensionality of the measure was that it could cover global patient experience as a process common to patients with a variety of diseases and irrespective of the phase of treatment course.Patients and methods: The HSOPE was compiled by 1,532 adult outpatients (51% females, mean age 59.22 years, standard deviation 16.26 receiving care in ten facilities at the Santa Maria alle Scotte University Hospital of Siena, Italy. The sample represented all the age cohorts. Twelve percent were young adults, 57% were adults, and 32% were older adults. Exploratory and confirmatory factor analyses were conducted to evaluate factor structure. Reliability was evaluated as internal consistency using Cronbach’s α. Factor invariance was assessed through multigroup analyses.Results: Both exploratory and confirmatory analyses suggested a clearly defined unidimensional structure of the measure, with all the ten items having salient loadings on a single factor. Internal consistency was excellent (α=0.95. Indices of model fit supported a single-factor structure for both male and female outpatient groups. Young adult outpatients had significantly lower scores on perceived patient-centeredness relative to older adults. No

  11. Measuring CMB polarization from ISS: the SPOrt experiment

    International Nuclear Information System (INIS)

    Colombo, L.P.L.

    2004-01-01

    The SPOrt (Sky Polarization Observatory) experiment aims to measure CMBP (cosmic microwave background polarization) on about 80% of the sky from space. Selected by ESA to fly on board the ISS in 2006, it is funded by the Italian Space Agency (ASI). As shown also by the recent WMAP release, CMBP data, besides of removing various degeneracies among cosmological parameters, provided new and important information on the cosmic opacity τ and, therefore, on very early cosmic objects which reionized the world at z ∼ 15. Most such information is obtained from low-l spectral components, that SPOrt, with its HPBW resolution of 7 degrees will explore with a high level of sensitivity. The 4 polarimeters of SPOrt work at 22, 32 and (2x) 90 GHz. At lower frequencies they will provide a (nearly) all-sky survey of Galactic synchrotron polarized emission, while data at the higher frequency will measure the CMBP signal. Correlating SPOrt with anisotropy data, by other experiments, shall therefore provide significant cosmological information. We performed a number of simulations of SPOrt performance, aimed to determine how far τ and/or other parameter(s) concerning reionization are constrained by the expected data. We also considered a possible interplay between reionization histories and Dark Energy nature. Besides of information on technological developments for systematics reduction, long term stability and observing time efficiency, we report here recent outputs on the expected SPOrt performance in constraining cosmological models

  12. Confirmatory simulation of safety and operational transients in LMFBR systems

    International Nuclear Information System (INIS)

    Guppy, J.G.; Agrawal, A.K.

    1978-01-01

    Operational and safety transients that may originate anywhere in an LMFBR system must be adequately simulated to assist in safety evaluation and plant design efforts. This paper describes an advanced thermohydraulic transient code, the Super System Code (SSC), that may be used for confirmatory safety evaluations of plant wide events, such as assurance of adequate decay heat removal capability under natural circulation conditions, and presents results obtained with SSC illustrating the degree of modelling detail present in the code as well as the computing efficiency. (author)

  13. Development Instruments Through Confirmatory Factor Analysis (CFA in Appropriate Intensity Assessment

    Directory of Open Access Journals (Sweden)

    Ari Saptono

    2017-06-01

    Full Text Available The research aims to develop the valid and reliable measurement instruments of entrepreneurship intention in vocational secondary school students. Multi stage random sampling was used as the technique to determine sample (300 respondents. The research method used research and development with confirmatory factor analysis (CFA. Result of confirmatory factor analysis (CFA at the second order with robust maximum likelihood method shows that valid and reliable instrument with the acquisition value of loading factor is more than 0.5 (> 0,5 and a significance value of t is more than 1,96 (> 1,96. Reliability test results shows that the value of the combined construct reliability (CR of 0.97and a variance value extract (VE to 0.52 is greater than the limit of acceptance CR ≥ 0.70 and VE ≥ 0.50. The conclusion of the measurement instruments of entrepreneurship intention with three dimensions and 31 items met the standards of validity and reliability in accordance with the instrument development process.

  14. Dyadic confirmatory factor analysis of the inflammatory bowel disease family responsibility questionnaire.

    Science.gov (United States)

    Greenley, Rachel Neff; Reed-Knight, Bonney; Blount, Ronald L; Wilson, Helen W

    2013-09-01

    Evaluate the factor structure of youth and maternal involvement ratings on the Inflammatory Bowel Disease Family Responsibility Questionnaire, a measure of family allocation of condition management responsibilities in pediatric inflammatory bowel disease. Participants included 251 youth aged 11-18 years with inflammatory bowel disease and their mothers. Item-level descriptive analyses, subscale internal consistency estimates, and confirmatory factor analyses of youth and maternal involvement were conducted using a dyadic data-analytic approach. Results supported the validity of 4 conceptually derived subscales including general health maintenance, social aspects, condition management tasks, and nutrition domains. Additionally, results indicated adequate support for the factor structure of a 21-item youth involvement measure and strong support for a 16-item maternal involvement measure. Additional empirical support for the validity of the Inflammatory Bowel Disease Family Responsibility Questionnaire was provided. Future research to replicate current findings and to examine the measure's clinical utility is warranted.

  15. Simulated Measurements of Cooling in Muon Ionization Cooling Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Mohayai, Tanaz [IIT, Chicago; Rogers, Chris [Rutherford; Snopok, Pavel [Fermilab

    2016-06-01

    Cooled muon beams set the basis for the exploration of physics of flavour at a Neutrino Factory and for multi-TeV collisions at a Muon Collider. The international Muon Ionization Cooling Experiment (MICE) measures beam emittance before and after an ionization cooling cell and aims to demonstrate emittance reduction in muon beams. In the current MICE Step IV configuration, the MICE muon beam passes through low-Z absorber material for reducing its transverse emittance through ionization energy loss. Two scintillating fiber tracking detectors, housed in spectrometer solenoid modules upstream and downstream of the absorber are used for reconstructing position and momentum of individual muons for calculating transverse emittance reduction. However, due to existence of non-linear effects in beam optics, transverse emittance growth can be observed. Therefore, it is crucial to develop algorithms that are insensitive to this apparent emittance growth. We describe a different figure of merit for measuring muon cooling which is the direct measurement of the phase space density.

  16. Measurement of electron neutrino appearance with the MINOS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Joshua Adam Alpern [Harvard Univ., Cambridge, MA (United States)

    2009-05-01

    MINOS is a long-baseline two-detector neutrino oscillation experiment that uses a high intensity muon neutrino beam to investigate the phenomena of neutrino oscillations. By measuring the neutrino interactions in a detector near the neutrino source and again 735 km away from the production site, it is possible to probe the parameters governing neutrino oscillation. The majority of the vμ oscillate to vτ but a small fraction may oscillate instead to ve. This thesis presents a measurement of the ve appearance rate in the MINOS far detector using the first two years of exposure. Methods for constraining the far detector backgrounds using the near detector measurements is discussed and a technique for estimating the uncertainty on the background and signal selection are developed. A 1.6σ excess over the expected background rate is found providing a hint of ve appearance.

  17. Ionospheric measurements for the Non-Proliferation Experiment

    International Nuclear Information System (INIS)

    Fitzgerald, T.J.

    1994-01-01

    The detection of explosions using ionospheric techniques relies on measuring perturbations induced in radio propagation by acoustics waves which disturb the electron density of the ionosphere. Such techniques have been applied to the detection of atmospheric explosions, underground nuclear tests, earthquakes, and surface mining explosions. The nighttime ionosphere presents a difficulty for the detection of explosions because in the absence of solar ionization radiation the electron density in the altitude range of 90 to 200 km decays after sunset and perturbation effects are correspondingly reduced. On the other hand, acoustic waves produced by weak sources reach a maximum amplitude in the altitude range of 100 to 150 km and are highly attenuated at altitudes above 200 km. For safety reasons, most planned explosions are conducted during daylight which has limited the experimental measurements during nighttime. However a recent opportunity for a nighttime measurement occurred in connection with the Non-Proliferation Experiment which consisted of the detonation of a large chemical charge underground at the Nevada Test Site near midnight local time. the results, based on a new technique of using medium frequency radio transmissions provided by commercial broadcasts to detect explosion effects, were negative. The most likely explanation for the negative result is that the radio transmissions did not reflect at a low enough altitude to sense the perturbations produced by the acoustic waves

  18. Medindo consumo de álcool: análise fatorial confirmatória do Alcohol Use Disorder Identification Test (AUDIT Midiendo consumo de alcohol: análisis factorial confirmatorio del Alcohol Use Disorder Identification Test (AUDIT Measuring alcohol consumption: confirmatory factor analysis of The Alcohol Use Disorder Identification Test (AUDIT

    Directory of Open Access Journals (Sweden)

    Walberto Silva dos Santos

    2013-04-01

    to AUDIT , the participants responded to two others correlated instruments - CAGE and EAFUA - and to biosocialdemographic questions. The confirmatory factor analysis indicated the adequacy of the model of three factors, with goodness of fit indexes (χ²/gl=63,29, CFI=0,98, AGFI=0,98 e RMSEA=0,05 statistically higher than the structure of one and two factors. Finally, resorting to Pearson's r correlations and the comparison of means, both convergent and criterion validity of AUDIT were confirmed, attesting its proposal of measuring alcohol consumption and demonstrating its applicability in the screening of problem drinkers.

  19. Group sequential and confirmatory adaptive designs in clinical trials

    CERN Document Server

    Wassmer, Gernot

    2016-01-01

    This book provides an up-to-date review of the general principles of and techniques for confirmatory adaptive designs. Confirmatory adaptive designs are a generalization of group sequential designs. With these designs, interim analyses are performed in order to stop the trial prematurely under control of the Type I error rate. In adaptive designs, it is also permissible to perform a data-driven change of relevant aspects of the study design at interim stages. This includes, for example, a sample-size reassessment, a treatment-arm selection or a selection of a pre-specified sub-population. Essentially, this adaptive methodology was introduced in the 1990s. Since then, it has become popular and the object of intense discussion and still represents a rapidly growing field of statistical research. This book describes adaptive design methodology at an elementary level, while also considering designing and planning issues as well as methods for analyzing an adaptively planned trial. This includes estimation methods...

  20. TeV electron measurement with CREST experiment

    Science.gov (United States)

    Park, Nahee; Anderson, T.; Bower, C.; Coutu, S.; Gennaro, J.; Geske, M.; Muller, D.; Musser, J.; Nutter, S.

    CREST, the Cosmic Ray Electron Synchrotron Telescope is a balloon-borne experiment de-signed to measure the spectrum of multi-TeV electrons by the detection of the x-ray synchrotron photons generated in the magnetic field of the Earth. Electrons in the TeV range are expected to reflect the properties of local sources because fluxes from remote locations are suppressed by radiative losses during propagation. Since CREST needs to intersect only a portion of the kilometers-long trail of photons generated by the high-energy electron, the method yields a larger effective area than the physical size of the detector, boosting detection areas. The in-strument is composed of an array of 1024 BaF2 crystals and a set of scintillating veto counters. A long duration balloon flight in Antarctica is currently planned for the 2010-11 season.

  1. Online Radiation Dose Measurement System for ATLAS experiment

    CERN Document Server

    Mandić, I; The ATLAS collaboration

    2012-01-01

    Particle detectors and readout electronics in the high energy physics experiment ATLAS at the Large Hadron Collider at CERN operate in radiation field containing photons, charged particles and neutrons. The particles in the radiation field originate from proton-proton interactions as well as from interactions of these particles with material in the experimental apparatus. In the innermost parts of ATLAS detector components will be exposed to ionizing doses exceeding 100 kGy. Energetic hadrons will also cause displacement damage in silicon equivalent to fluences of several times 10e14 1 MeV-neutrons per cm2. Such radiation doses can have severe influence on the performance of detectors. It is therefore very important to continuously monitor the accumulated doses to understand the detector performance and to correctly predict the lifetime of radiation sensitive components. Measurements of doses are important also to verify the simulations and represent a crucial input into the models used for predicting future ...

  2. Continuous measurements of nitrous oxide isotopomers during incubation experiments

    Science.gov (United States)

    Winther, Malte; Balslev-Harder, David; Christensen, Søren; Priemé, Anders; Elberling, Bo; Crosson, Eric; Blunier, Thomas

    2018-02-01

    Nitrous oxide (N2O) is an important and strong greenhouse gas in the atmosphere. It is produced by microbes during nitrification and denitrification in terrestrial and aquatic ecosystems. The main sinks for N2O are turnover by denitrification and photolysis and photo-oxidation in the stratosphere. In the linear N = N = O molecule 15N substitution is possible in two distinct positions: central and terminal. The respective molecules, 14N15N16O and 15N14N16O, are called isotopomers. It has been demonstrated that N2O produced by nitrifying or denitrifying microbes exhibits a different relative abundance of the isotopomers. Therefore, measurements of the site preference (difference in the abundance of the two isotopomers) in N2O can be used to determine the source of N2O, i.e., nitrification or denitrification. Recent instrument development allows for continuous position-dependent δ15N measurements at N2O concentrations relevant for studies of atmospheric chemistry. We present results from continuous incubation experiments with denitrifying bacteria, Pseudomonas fluorescens (producing and reducing N2O) and Pseudomonas chlororaphis (only producing N2O). The continuous measurements of N2O isotopomers reveals the transient isotope exchange among KNO3, N2O, and N2. We find bulk isotopic fractionation of -5.01 ‰ ± 1.20 for P. chlororaphis, in line with previous results for production from denitrification. For P. fluorescens, the bulk isotopic fractionation during production of N2O is -52.21 ‰ ± 9.28 and 8.77 ‰ ± 4.49 during N2O reduction.The site preference (SP) isotopic fractionation for P. chlororaphis is -3.42 ‰ ± 1.69. For P. fluorescens, the calculations result in SP isotopic fractionation values of 5.73 ‰ ± 5.26 during production of N2O and 2.41 ‰ ± 3.04 during reduction of N2O. In summary, we implemented continuous measurements of N2O isotopomers during incubation of denitrifying bacteria and believe that similar experiments will lead to a better

  3. Validation of ozone measurements from the Atmospheric Chemistry Experiment (ACE

    Directory of Open Access Journals (Sweden)

    E. Dupuy

    2009-01-01

    Full Text Available This paper presents extensive {bias determination} analyses of ozone observations from the Atmospheric Chemistry Experiment (ACE satellite instruments: the ACE Fourier Transform Spectrometer (ACE-FTS and the Measurement of Aerosol Extinction in the Stratosphere and Troposphere Retrieved by Occultation (ACE-MAESTRO instrument. Here we compare the latest ozone data products from ACE-FTS and ACE-MAESTRO with coincident observations from nearly 20 satellite-borne, airborne, balloon-borne and ground-based instruments, by analysing volume mixing ratio profiles and partial column densities. The ACE-FTS version 2.2 Ozone Update product reports more ozone than most correlative measurements from the upper troposphere to the lower mesosphere. At altitude levels from 16 to 44 km, the average values of the mean relative differences are nearly all within +1 to +8%. At higher altitudes (45–60 km, the ACE-FTS ozone amounts are significantly larger than those of the comparison instruments, with mean relative differences of up to +40% (about +20% on average. For the ACE-MAESTRO version 1.2 ozone data product, mean relative differences are within ±10% (average values within ±6% between 18 and 40 km for both the sunrise and sunset measurements. At higher altitudes (~35–55 km, systematic biases of opposite sign are found between the ACE-MAESTRO sunrise and sunset observations. While ozone amounts derived from the ACE-MAESTRO sunrise occultation data are often smaller than the coincident observations (with mean relative differences down to −10%, the sunset occultation profiles for ACE-MAESTRO show results that are qualitatively similar to ACE-FTS, indicating a large positive bias (mean relative differences within +10 to +30% in the 45–55 km altitude range. In contrast, there is no significant systematic difference in bias found for the ACE-FTS sunrise and sunset measurements.

  4. openBEB: open biological experiment browser for correlative measurements.

    Science.gov (United States)

    Ramakrishnan, Chandrasekhar; Bieri, Andrej; Sauter, Nora; Roizard, Sophie; Ringler, Philippe; Müller, Shirley A; Goldie, Kenneth N; Enimanev, Kaloyan; Stahlberg, Henning; Rinn, Bernd; Braun, Thomas

    2014-03-26

    New experimental methods must be developed to study interaction networks in systems biology. To reduce biological noise, individual subjects, such as single cells, should be analyzed using high throughput approaches. The measurement of several correlative physical properties would further improve data consistency. Accordingly, a considerable quantity of data must be acquired, correlated, catalogued and stored in a database for subsequent analysis. We have developed openBEB (open Biological Experiment Browser), a software framework for data acquisition, coordination, annotation and synchronization with database solutions such as openBIS. OpenBEB consists of two main parts: A core program and a plug-in manager. Whereas the data-type independent core of openBEB maintains a local container of raw-data and metadata and provides annotation and data management tools, all data-specific tasks are performed by plug-ins. The open architecture of openBEB enables the fast integration of plug-ins, e.g., for data acquisition or visualization. A macro-interpreter allows the automation and coordination of the different modules. An update and deployment mechanism keeps the core program, the plug-ins and the metadata definition files in sync with a central repository. The versatility, the simple deployment and update mechanism, and the scalability in terms of module integration offered by openBEB make this software interesting for a large scientific community. OpenBEB targets three types of researcher, ideally working closely together: (i) Engineers and scientists developing new methods and instruments, e.g., for systems-biology, (ii) scientists performing biological experiments, (iii) theoreticians and mathematicians analyzing data. The design of openBEB enables the rapid development of plug-ins, which will inherently benefit from the "house keeping" abilities of the core program. We report the use of openBEB to combine live cell microscopy, microfluidic control and visual

  5. Confirmatory factor analysis of the neck disability index in a whiplash population indicates a one-factor model is viable

    OpenAIRE

    Gabel, Charles P.; Cuesta-Vargas, Antonio I.; Barr, Sebastian; Winkeljohn Black, Stephanie; Osborne, Jason W.; Melloh, Markus

    2016-01-01

    Purpose The neck disability index (NDI) as a 10-item patient reported outcome (PRO) measure is the most commonly used whiplash associated disorders (WAD) assessment tool. However, statistical rigor and factor structure are not definitive. To date, confirmatory factor analysis (CFA) has not examined whether the factor structure generalizes across different groups (e.g., WAD versus non-WAD). This study aimed to determine the psychometric properties of the NDI in these population groups.

  6. "CONFIRMATORY SURVEY RESULTS FOR THE ABB COMBUSTION ENGINEERING SITE WINDSOR, CONNECTICUT DCN 5158-SR-02-2

    Energy Technology Data Exchange (ETDEWEB)

    ADAMS, WADE C

    2013-03-25

    The objectives of the confirmatory activities were to provide independent contractor field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the contractor's procedures and FSS results. ORAU reviewed ABB CE's decommissioning plan, final status survey plan, and the applicable soil DCGLs, which were developed based on an NRC-approved radiation dose assessment. The surveys include gamma surface scans, gamma direct measurements, and soil sampling.

  7. Confirmatory factorial analysis of TEOSQp / Análise factorial confirmatória do TEOSQp

    Directory of Open Access Journals (Sweden)

    Helder M. Fernandes

    2010-01-01

    Full Text Available The present research assessed the reliability, factorial validity and measurement invariance (by gender of the Portuguese version of TEOSQ –Task and Ego Orientation in Sport Questionnaire (Fonseca & Biddle, 2001. Data were collected from 1010 physical education students with a mean age of 15.42 ( SD=1.91. Factorial and invariance measurements were tested via confirmatory factorial analysis. Results supported internal consistency for the two proposed subscales (task and ego. Based on modification indices and theoretical justification the TEOSQ p was reduced to 12 items with better goodness-of-fit indices for the oblique model. The results of gender invariance did not provide full empirical support to the multi-group equivalence assumption, being suggested that TEOSQ p does not measure in the same way goal orientations for boys (orthogonal model and girls (oblique model. In light of these results, conceptual, empirical and practical issues were discussed.

  8. Well-Being at Work Scale: Exploratory and Confirmatory Validation in the USA

    Directory of Open Access Journals (Sweden)

    Gisela Demo

    2016-04-01

    Full Text Available Abstract Given the lack of instruments to measure both affective and cognitive elements of well-being at work, the objective of this study is to look for evidence of validity in the US regarding the well-being at work scale, which was first validated in Brazil to measure employee well-being perceptions. Two studies using two different American samples of 809 participants in total were conducted for the exploratory and confirmatory validation of the scale. Construct validity was determined using convergent, discriminant, and nomological validity, which was assessed using a structural equation model to determine a correlation between well-being at work and human resources management practices. This research provides a comprehensive and operationally valid measure of well-being in work settings. The three-factor model can be used as a diagnostic tool for managers who wish to identify and improve the well-being of their work teams.

  9. Pion Production Measurement in NA61/SHINE Experiment for High Precision Neutrino Oscillation Experiments

    CERN Document Server

    Palczewski, Tomasz Jan

    2009-01-01

    One of physics goals of the NA61/SHINE experiment is a measurement of hadron production cross sections from proton-Carbon interactions at 31GeV/c for the T2K experiment at J-PARC. A precise knowledge of differential cross sections for pion and kaon production is of importance for improving the accuracy of neutrino flux simulations. The NA61 detector has a large angular acceptance, full coverage of the T2K phase space region, and good particle identification. In this work the analyses of negatively charged pion production are presented. Two different methods of negative pion selection and corrections for detector effects are discussed. Finally, preliminary dn/dp distributions of negatively charged pion in p+C interactions at 31 GeV/c are presented.

  10. Confirmatory factor analysis reveals a latent cognitive structure common to bipolar disorder, schizophrenia, and normal controls.

    Science.gov (United States)

    Schretlen, David J; Peña, Javier; Aretouli, Eleni; Orue, Izaskun; Cascella, Nicola G; Pearlson, Godfrey D; Ojeda, Natalia

    2013-06-01

    We sought to determine whether a single hypothesized latent factor structure would characterize cognitive functioning in three distinct groups. We assessed 576 adults (340 community controls, 126 adults with bipolar disorder, and 110 adults with schizophrenia) using 15 measures derived from nine cognitive tests. Confirmatory factor analysis (CFA) was conducted to examine the fit of a hypothesized six-factor model. The hypothesized factors included attention, psychomotor speed, verbal memory, visual memory, ideational fluency, and executive functioning. The six-factor model provided an excellent fit for all three groups [for community controls, root mean square error of approximation (RMSEA) schizophrenia, RMSEA = 0.06 and CFI = 0.98]. Alternate models that combined fluency with processing speed or verbal and visual memory reduced the goodness of fit. Multi-group CFA results supported factor invariance across the three groups. Confirmatory factor analysis supported a single six-factor structure of cognitive functioning among patients with schizophrenia or bipolar disorder and community controls. While the three groups clearly differ in level of performance, they share a common underlying architecture of information processing abilities. These cognitive factors could provide useful targets for clinical trials of treatments that aim to enhance information processing in persons with neurological and neuropsychiatric disorders. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  11. A Confirmatory Factor Analysis of the Structure of Abbreviated Math Anxiety Scale

    Directory of Open Access Journals (Sweden)

    Farahman Farrokhi

    2011-06-01

    Full Text Available "nObjective: The aim of this study is to explore the confirmatory factor analysis results of the Persian adaptation of Abbreviated Math Anxiety Scale (AMAS, proposed by Hopko, Mahadevan, Bare & Hunt. "nMethod: The validity and reliability assessments of the scale were performed on 298 college students chosen randomly from Tabriz University in Iran. The confirmatory factor analysis (CFA was carried out to determine the factor structures of the Persian version of AMAS. "nResults: As expected, the two-factor solution provided a better fit to the data than a single factor. Moreover, multi-group analyses showed that this two-factor structure was invariant across sex. Hence, AMAS provides an equally valid measure for use among college students. "nConclusions:  Brief AMAS demonstrates adequate reliability and validity. The AMAS scores can be used to compare symptoms of math anxiety between male and female students. The study both expands and adds support to the existing body of math anxiety literature.

  12. PAMELA: A Satellite Experiment for Antiparticles Measurement in Cosmic Rays

    Science.gov (United States)

    Bongi, M.; Adriani, O.; Ambriola, M.; Bakaldin, A.; Barbarino, G. C.; Basili, A.; Bazilevskaja, G.; Bellotti, R.; Bencardino, R.; Boezio, M.; Bogomolov, E. A.; Bonechi, L.; Bongiorno, L.; Bonvicini, V.; Boscherini, M.; Cafagna, F. S.; Campana, D.; Carlson, P.; Casolino, M.; Castellini, G.; Circella, M.; De Marzo, C. N.; De Pascale, M. P.; Furano, G.; Galper, A. M.; Giglietto, N.; Grigorjeva, A.; Koldashov, S. V.; Korotkov, M. G.; Krut'kov, S. Y.; Lund, J.; Lundquist, J.; Menicucci, A.; Menn, W.; Mikhailov, V. V.; Minori, M.; Mirizzi, N.; Mitchell, J. W.; Mocchiutti, E.; Morselli, A.; Mukhametshin, R.; Orsi, S.; Osteria, G.; Papini, P.; Pearce, M.; Picozza, P.; Ricci, M.; Ricciarini, S. B.; Romita, M.; Rossi, G.; Russo, S.; Schiavon, P.; Simon, M.; Sparvoli, R.; Spillantini, P.; Spinelli, P.; Stochaj, S. J.; Stozhkov, Y.; Straulino, S.; Streitmatter, R. E.; Taccetti, F.; Vacchi, A.; Vannuccini, E.; Vasilyev, G. I.; Voronov, S. A.; Wischnewski, R.; Yurkin, Y.; Zampa, G.; Zampa, N.

    2004-06-01

    PAMELA is a satellite-borne experiment that will study the antiproton and positron fluxes in cosmic rays in a wide range of energy (from 80 MeV up to 190 GeV for antiprotons and from 50 MeV up to 270 GeV for positrons) and with high statistics, and that will measure the antihelium/helium ratio with a sensitivity of the order of 10/sup -8/. The detector will fly on-board a polar orbiting Resurs DK1 satellite, which will be launched into space by a Soyuz rocket in 2004 from Baikonur cosmodrome in Kazakhstan, for a 3-year-long mission. Particle identification and energy measurements are performed in the PAMELA apparatus using the following subdetectors: a magnetic spectrometer made up of a permanent magnet equipped with double-sided microstrip silicon detectors, an electromagnetic imaging calorimeter composed of layers of tungsten absorber and silicon detectors planes, a transition radiation detector made of straw tubes interleaved with carbon fiber radiators, a plastic scintillator time-of-flight and trigger system, a set of anticounter plastic scintillator detectors, and a neutron detector. The features of the detectors and the main results obtained in beam test sessions are presented.

  13. Measuring the Magnetic Birefringence of Vacuum: the Pvlas Experiment

    Science.gov (United States)

    Zavattini, G.; Gastaldi, U.; Pengo, R.; Ruoso, G.; Della Valle, F.; Milotti, E.

    2012-06-01

    We describe the principle and the status of the PVLAS experiment which is presently running at the INFN section of Ferrara, Italy, to detect the magnetic birefringence of vacuum. This is related to the QED vacuum structure and can be detected by measuring the ellipticity acquired by a linearly polarized light beam propagating through a strong magnetic field. Such an effect is predicted by the Euler-Heisenberg Lagrangian. The method is also sensitive to other hypothetical physical effects such as axion-like particles and in general to any fermion/boson millicharged particle. Here we report on the construction of our apparatus based on a high finesse (> 2·105) Fabry-Perot cavity and two 0.9 m long 2.5 T permanent dipole rotating magnets, and on the measurements performed on a scaled down test setup. With the test setup we have improved by about a factor 2 the limit on the parameter Ae describing nonlinear electrodynamic effects in vacuum: Ae < 2.9 · 10-21 T-2 @ 95% C.L.

  14. Sandbox experiments on Uraninite Ore: ERT and SP measurments.

    Science.gov (United States)

    Singh, R. K.

    2015-12-01

    Nuclear energy, considering its own intrinsic merits, would be a leading source for meeting the energy requirement in present and future scenario. Concealed Uranium deposits under sedimentary cover, with poor surface indications calls for reorientation of survey with large inputs involving integrated geophysical approach. Sand Box experiments have been carried out over Uraninite ore. The tank is a glass fish tank (height 39 cm, length 75 cm, width 30 cm). It was filled with sand up to 35 cm high. The sand was saturated from below to minimize the entrapment of the gas bubbles. The average size for sand grains is ~ 0.295mm. The formation factor of the sand is 3.5, with a negligible surface conductivity because of the coarse nature of the sand grains. The dimension of considered Uraninite ore sample is 4cm x 4cm x 4cm. The depth of top of the ore sample is kept at 3cm. In this paper both resistivity and self-potential measurements were carried out for possible detection of Uraninite. The resistivity measurements were made with 64 non-polarizable electrodes using Electrical Resistivity Tomography (ERT) equipment of FlashRes Universal developed by ZZ Resistivity Imaging Pty. Ltd. We have used screws of length 3cm as electrodes. The separation between these electrodes are ~ 1cm. The resistivity tomography results clearly outlines the target Uraninite body. The resistivity tomography results also detects small heterogeneities associated with air bubbles possibly due to unsaturated pore spaces. SP measurements were made using two non-polarizing Pb/PbCl2 electrodes and a Fluke 289 voltmeter (sensitivity 0.001 mV, internal impedance 100 MOhm). The reference electrode was located on the corner of the sandbox. The other electrode was used to scan the electrical potential at the surface of the sand. SP measurements were made with a spacing of 3 cm over the same ERT profile. The SP results also shows a dip (or a low SP anomaly) over the target ore body sample. Thus, both SP and

  15. More than a memory: Confirmatory visual search is not caused by remembering a visual feature.

    Science.gov (United States)

    Rajsic, Jason; Pratt, Jay

    2017-10-01

    Previous research has demonstrated a preference for positive over negative information in visual search; asking whether a target object is green biases search towards green objects, even when this entails more perceptual processing than searching non-green objects. The present study investigated whether this confirmatory search bias is due to the presence of one particular (e.g., green) color in memory during search. Across two experiments, we show that this is not the critical factor in generating a confirmation bias in search. Search slowed proportionally to the number of stimuli whose color matched the color held in memory only when the color was remembered as part of the search instructions. These results suggest that biased search for information is due to a particular attentional selection strategy, and not to memory-driven attentional biases. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Confirmatory Factor Analysis of the Procrastination Assessment Scale for Students

    Directory of Open Access Journals (Sweden)

    Ronald D. Yockey

    2015-10-01

    Full Text Available The relative fit of one- and two-factor models of the Procrastination Assessment Scale for Students (PASS was investigated using confirmatory factor analysis on an ethnically diverse sample of 345 participants. The results indicated that although the two-factor model provided better fit to the data than the one-factor model, neither model provided optimal fit. However, a two-factor model which accounted for common item theme pairs used by Solomon and Rothblum in the creation of the scale provided good fit to the data. In addition, a significant difference by ethnicity was also found on the fear of failure subscale of the PASS, with Whites having significantly lower scores than Asian Americans or Latino/as. Implications of the results are discussed and recommendations made for future work with the scale.

  17. Lessons learned from operating experience, maintenance procedures and training measures

    International Nuclear Information System (INIS)

    Guttner, K.; Gronau, D.

    2003-01-01

    Training programmes for nuclear facility personnel as a result of the developing phase of SAT have to be approved in the subsequent implementation and evaluation phases with the consequence of several feedback activities in the whole training process. The effectiveness of this procedure has to be evaluated especially with respect to an improvement of safety culture, shorter outage times or better plant performance, resulting in a smaller number of incidents due to human failures. The first two arguments are directly connected with all types of maintenance work in a nuclear power plant and the related preparatory training measures. The reduction of incidents due to human failures is the result of different influences, i.e. training of the operational as well as of the maintenance personnel together with changes of the operating procedures or system design. Though an evaluation of the training process should always be based on a clear definition of criteria by which the fulfilment of the learning objectives can be measured directly, the real effectiveness of training is proven by the behaviour and attitude of the personnel which can only be taken from indirect indicators. This is discussed in more detail for some examples being partly related to the above mentioned arguments. An excellent plant performance, representing a general objective of all activities, can be analysed by the changed number and reasons of incidents in a plant during its operation time. Two further examples are taken from the reactor service field where there is a tendency to reduce the individual dose rates by changed devices and/or procedures as an output from training experience with mockups. Finally the rationalisation of refresher training for operational personnel by the use of interactive teaching programs (Computer Based Training - CBT) is presented which integrate learning objectives together with a test module. (author)

  18. Lifetime measurements of beauty hadrons at the LHCb experiment

    Energy Technology Data Exchange (ETDEWEB)

    Dordei, Francesca

    2015-05-19

    This thesis presents several lifetime measurements of b-flavoured hadrons at the LHCb experiment. They represent an important test of the theoretical approach to b-hadron observables known as Heavy Quark Expansion (HQE). This analysis uses data corresponding to an integrated luminosity of 1 fb{sup -1} collected in proton-proton collisions at a centre-of-mass energy of √(s)=7 TeV. For the decays B{sup +}→J/ψK{sup +}, B{sup 0}→J/ψK{sup *0}, B{sup 0}→J/ψK{sup 0}{sub S}, Λ{sup 0}{sub b}→J/ψΛ and B{sup 0}{sub s}→J/ψφ the lifetimes are measured to be τ{sub B{sup +}→J/ψK{sup +}}=1.637±0.004±0.003 ps, τ{sub B{sup 0}→J/ψK}{sup {sub *}{sub 0}}=1.524±0.006±0.004 ps, τ{sub B{sup 0}→J/ψK{sup 0}{sub S}}=1.499±0.013±0.005 ps, τ{sub Λ{sup 0}{sub b}} {sub →} {sub J/ψΛ}=1.415±0.027±0.006 ps, τ{sub B{sup 0}{sub s}} {sub →} {sub J/ψφ}=1.480±0.011±0.005 ps, where the first uncertainty is statistical and the second is systematic. These are the most precise lifetime measurements in these decay modes to date. Ratios of these lifetimes also are reported in this thesis, as they are well-defined quantities where many theoretical or experimental uncertainties cancel. The ratio of the decay width difference, ΔΓ{sub d}, to the average width, Γ{sub d}, in the B{sup 0} system is found to be ΔΓ{sub d}/Γ{sub d}=-0.044±0.025±0.011. Using data corresponding to an integrated luminosity of 3 fb{sup -1} collected at centre-of-mass energies of 7 TeV and 8 TeV, the measurements of the decay width difference, ΔΓ{sub s}, and the average width, Γ{sub s}, in the B{sup 0}{sub s} system are performed. Using the decay B{sup 0}{sub s}→J/ψφ, they are measured to be ΔΓ{sub s}=0.0805±0.0091±0.0033 ps{sup -1}, Γ{sub s}=0.6603±0.0027±0.0015 ps{sup -1}. These are the most precise determinations of these observables ot date. All measurements are consistent with HQE predictions.

  19. Measuring the Economic Value of Pre-MBA Work Experience

    Science.gov (United States)

    Yeaple, Ronald N.; Johnston, Mark W.; Whittingham, Keith L.

    2010-01-01

    Pre-MBA work experience is required for admission to many graduate schools of business. In the present study, MBA graduates with a wide range of pre-MBA work experience were surveyed to assess the economic value of such work experience. No evidence was found of a systematic financial advantage to students from working for several years before…

  20. Measuring Gen-Y Customer Experience in the Banking Sector

    Directory of Open Access Journals (Sweden)

    Kyguolienė Asta

    2017-12-01

    Full Text Available The article analyses customer experience as the subject of marketing research and presents methods for assessing customer experience. The results of empirical research revealing the Gen-Y customer experience in using the Lithuanian commercial banks’ services are presented.

  1. Muon polarization in the MEG experiment: predictions and measurements

    Energy Technology Data Exchange (ETDEWEB)

    Baldini, A.M.; Dussoni, S.; Galli, L.; Grassi, M.; Sergiampietri, F.; Signorelli, G. [Pisa Univ. (Italy); INFN Sezione di Pisa, Pisa (Italy); Bao, Y.; Hildebrandt, M.; Kettle, P.R.; Mtchedlishvili, A.; Papa, A.; Ritt, S. [Paul Scherrer Institut PSI, Villigen (Switzerland); Baracchini, E. [University of Tokyo, ICEPP, Tokyo (Japan); INFN, Laboratori Nazionali di Frascati, Rome (Italy); Bemporad, C.; Cei, F.; D' Onofrio, A.; Nicolo, D.; Tenchini, F. [INFN Sezione di Pisa, Pisa (Italy); Pisa Univ., Dipartimento di Fisica, Pisa (Italy); Berg, F.; Hodge, Z.; Rutar, G. [Paul Scherrer Institut PSI, Villigen (Switzerland); Swiss Federal Institute of Technology ETH, Zurich (Switzerland); Biasotti, M.; Gatti, F.; Pizzigoni, G. [INFN Sezione di Genova, Genova (Italy); Genova Univ., Dipartimento di Fisica, Genova (Italy); Boca, G.; De Bari, A. [INFN Sezione di Pavia, Pavia (Italy); Pavia Univ., Dipartimento di Fisica, Pavia (Italy); Cattaneo, P.W.; Rossella, M. [Pavia Univ. (Italy); INFN Sezione di Pavia, Pavia (Italy); Cavoto, G.; Piredda, G.; Renga, F.; Voena, C. [Univ. ' ' Sapienza' ' , Rome (Italy); INFN Sezione di Roma, Rome (Italy); Chiarello, G.; Panareo, M.; Pepino, A. [INFN Sezione di Lecce, Lecce (Italy); Univ. del Salento, Dipartimento di Matematica e Fisica, Lecce (Italy); Chiri, C.; Grancagnolo, F.; Tassielli, G.F. [Univ. del Salento (Italy); INFN Sezione di Lecce, Lecce (Italy); De Gerone, M. [Genova Univ. (Italy); INFN Sezione di Genova, Genova (Italy); Fujii, Y.; Iwamoto, T.; Kaneko, D.; Mori, Toshinori; Nakaura, S.; Nishimura, M.; Ogawa, S.; Ootani, W.; Sawada, R.; Uchiyama, Y.; Yoshida, K. [University of Tokyo, ICEPP, Tokyo (Japan); Graziosi, A.; Ripiccini, E. [INFN Sezione di Roma, Rome (Italy); Univ. ' ' Sapienza' ' , Dipartimento di Fisica, Rome (Italy); Grigoriev, D.N. [Budker Institute of Nuclear Physics of Siberian Branch of Russian Academy of Sciences, Novosibirsk (Russian Federation); Novosibirsk State Technical University, Novosibirsk (Russian Federation); Novosibirsk State University, Novosibirsk (Russian Federation); Haruyama, T.; Mihara, S.; Nishiguchi, H.; Yamamoto, A. [KEK, High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan); Ieki, K. [Paul Scherrer Institut PSI, Villigen (Switzerland); University of Tokyo, ICEPP, Tokyo (Japan); Ignatov, F.; Khazin, B.I.; Popov, A.; Yudin, Yu.V. [Budker Institute of Nuclear Physics of Siberian Branch of Russian Academy of Sciences, Novosibirsk (Russian Federation); Novosibirsk State University, Novosibirsk (Russian Federation); Kang, T.I.; Lim, G.M.A.; Molzon, W.; You, Z. [University of California, Irvine, CA (United States); Khomutov, N.; Korenchenko, A.; Kravchuk, N. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Venturini, M. [Pisa Univ. (Italy); INFN Sezione di Pisa, Pisa (Italy); Scuola Normale Superiore, Pisa (Italy); Collaboration: The MEG Collaboration

    2016-04-15

    The MEG experiment makes use of one of the world's most intense low energy muon beams, in order to search for the lepton flavour violating process μ{sup +} → e{sup +}γ. We determined the residual beam polarization at the thin stopping target, by measuring the asymmetry of the angular distribution of Michel decay positrons as a function of energy. The initial muon beam polarization at the production is predicted to be P{sub μ} = -1 by the Standard Model (SM) with massless neutrinos. We estimated our residual muon polarization to be P{sub μ} =.0.86 ± 0.02 (stat){sub -0.06}{sup +0.05} (syst) at the stopping target, which is consistent with the SM predictions when the depolarizing effects occurring during the muon production, propagation and moderation in the target are taken into account. The knowledge of beam polarization is of fundamental importance in order to model the background of our μ{sup +} → e{sup +}γ search induced by the muon radiative decay: μ{sup +} → e{sup +} anti ν{sub μ}ν{sub e}γ. (orig.)

  2. Flowing dusty plasma experiments: generation of flow and measurement techniques

    Science.gov (United States)

    Jaiswal, S.; Bandyopadhyay, P.; Sen, A.

    2016-12-01

    A variety of experimental techniques for the generation of subsonic/supersonic dust fluid flows and means of measuring such flow velocities are presented. The experiments have been carried out in a \\Pi -shaped dusty plasma experimental device with micron size kaolin/melamine formaldehyde particles embedded in a background of argon plasma created by a direct current glow discharge. A stationary dust cloud is formed over the cathode region by precisely balancing the pumping speed and gas flow rate. A flow of dust particles/fluid is generated by additional gas injection from a single or dual locations or by altering the dust confining potential. The flow velocity is then estimated by three different techniques, namely, by super particle identification code, particle image velocimetry analysis and the excitation of dust acoustic waves. The results obtained from these three different techniques along with their merits and demerits are discussed. An estimation of the neutral drag force responsible for the generation as well as the attenuation of the dust fluid flow is made. These techniques can be usefully employed in laboratory devices to investigate linear and non-linear collective excitations in a flowing dusty plasma.

  3. One Year of FOS Measurements in CMS Experiment at CERN

    Science.gov (United States)

    Szillási, Zoltán; Buontempo, Salvatore; Béni, Noémi; Breglio, Giovanni; Cusano, Andrea; Laudati, Armando; Giordano, Michele; Saccomanno, Andrea; Druzhkin, Dmitry; Tsirou, Andromachi

    Results are presented on the activity carried out by our research group, in collaboration with the SME Optosmart s.r.l. (an Italian spin-off company), on the application of Fiber Optic Sensor (FOS) techniques to monitor high-energy physics (HEP) detectors. Assuming that Fiber Bragg Grating sensors (FBGs) radiation hardness has been deeply studied for other field of application, we have applied the FBG technology to the HEP research domain. We present here the experimental evidences of the solid possibility to use such a class of sensors also in HEP detector very complex environmental side conditions. In particular we present more than one year data results of FBG measurements in the Compact Muon Solenoid (CMS) experiment set up at the CERN, where we have monitored temperatures (within CMS core) and strains in different locations by using FBG sensors during the detector operation with the Large Hadron Collider (LHC) collisions and high magnetic field. FOS data and FOS readout system stability and reliability is demonstrated, with continuous 24/24 h 7/7d data taking under severe and complex side conditions.

  4. Fast pressure measurements for the TMX-U fusion experiment

    International Nuclear Information System (INIS)

    Hunt, A.L.; Coffield, F.E.; Pickles, W.L.

    1982-01-01

    The pressure on the boundary of the Lawrence Livermore National Laboratory's (LLNL) tandem mirror (TMX-U) plasma experiment is difficult to trace for several reasons: (1) the TMX-U boundary is in the high vacuum range (10 -5 to 10 -6 Pa) and requires an ionization gauge; (2) the boundary includes high-energy neutral particles and radiation, so the gauge must be optically baffled from the plasma; (3) the gauge must be shielded from the magnetic flux density of 0.03 T; (4) maximum conductance to the gauge must be preserved so that the time response remains about 1 ms; (5) a fast electrical circuit is required to measure the small ion-current changes at a rate consistent with the geometrical and experimental time constant of 1 ms. We have developed solutions to these limitations, including fast ionization gauge (FIG) circuitry for the remote gauge operation and the CAMAC system for recording the pressure-time history in the TMX-U computer data base. We also give some examples of actual fast pressure histories during plasma operation

  5. Muon polarization in the MEG experiment: predictions and measurements

    International Nuclear Information System (INIS)

    Baldini, A.M.; Dussoni, S.; Galli, L.; Grassi, M.; Sergiampietri, F.; Signorelli, G.; Bao, Y.; Hildebrandt, M.; Kettle, P.R.; Mtchedlishvili, A.; Papa, A.; Ritt, S.; Baracchini, E.; Bemporad, C.; Cei, F.; D'Onofrio, A.; Nicolo, D.; Tenchini, F.; Berg, F.; Hodge, Z.; Rutar, G.; Biasotti, M.; Gatti, F.; Pizzigoni, G.; Boca, G.; De Bari, A.; Cattaneo, P.W.; Rossella, M.; Cavoto, G.; Piredda, G.; Renga, F.; Voena, C.; Chiarello, G.; Panareo, M.; Pepino, A.; Chiri, C.; Grancagnolo, F.; Tassielli, G.F.; De Gerone, M.; Fujii, Y.; Iwamoto, T.; Kaneko, D.; Mori, Toshinori; Nakaura, S.; Nishimura, M.; Ogawa, S.; Ootani, W.; Sawada, R.; Uchiyama, Y.; Yoshida, K.; Graziosi, A.; Ripiccini, E.; Grigoriev, D.N.; Haruyama, T.; Mihara, S.; Nishiguchi, H.; Yamamoto, A.; Ieki, K.; Ignatov, F.; Khazin, B.I.; Popov, A.; Yudin, Yu.V.; Kang, T.I.; Lim, G.M.A.; Molzon, W.; You, Z.; Khomutov, N.; Korenchenko, A.; Kravchuk, N.; Venturini, M.

    2016-01-01

    The MEG experiment makes use of one of the world's most intense low energy muon beams, in order to search for the lepton flavour violating process μ + → e + γ. We determined the residual beam polarization at the thin stopping target, by measuring the asymmetry of the angular distribution of Michel decay positrons as a function of energy. The initial muon beam polarization at the production is predicted to be P μ = -1 by the Standard Model (SM) with massless neutrinos. We estimated our residual muon polarization to be P μ =.0.86 ± 0.02 (stat) -0.06 +0.05 (syst) at the stopping target, which is consistent with the SM predictions when the depolarizing effects occurring during the muon production, propagation and moderation in the target are taken into account. The knowledge of beam polarization is of fundamental importance in order to model the background of our μ + → e + γ search induced by the muon radiative decay: μ + → e + anti ν μ ν e γ. (orig.)

  6. Measuring stroke patients’ exercise preferences using a discrete choice experiment

    Directory of Open Access Journals (Sweden)

    Wolfgang Geidl

    2018-03-01

    Full Text Available Physical activity post stroke improves health, yet physical inactivity is highly prevalent. Tailored exercise programs considering physical activity preferences are a promising approach to promote physical activity. Therefore, this study seeks to measure exercise preferences of stroke survivors. Stroke survivors conducted a discrete choice experiment (DCE. DCE was presented in a face-to-face interview where patients had to choose eight times between two different exercise programs. Exercise programs differed by characteristics, with the six attributes under consideration being social situation, location, type of exercise, intensity, frequency, and duration. Utilities of the exercise attributes were estimated with a logit choice model. Stroke survivors (n=103, mean age: 67, SD=13.0; 60% male show significant differences in the rated utilities of the exercise attributes (P<0.001. Participants had strong preferences for light and moderate intense physical activity and favored shorter exercise sessions. Stroke survivors have remarkable exercise preferences especially for intensity and duration of exercise. Results contribute to the tailoring of physical activity programs after stroke thereby facilitating maintenance of physical activity.

  7. Experiment to measure oxygen opacity at high density and temperature

    Science.gov (United States)

    Keiter, Paul; Butler, Hannah; Trantham, Matt; Mussack, Katie; Colgan, James; Fontes, Chris; Guzik, Joyce; Kilcrease, David; Perry, Ted; Orban, Chris; Ducret, Jean-Eric; La Pennec, Maelle; Turck-Chieze, Sylvaine; Mancini, Roberto; Heeter, Robert

    2017-10-01

    In recent years, there has been a debate over the abundances of heavy elements (Z >2) in the solar interior. Recent solar atmosphere models [Asplund 2009] find a significantly lower abundance for C, N, and O compared to models used roughly a decade ago. Recent opacity measurements of iron disagree with opacity model predictions [Bailey et al., 2015]. Repeated scrutiny of the experiment and data has not produced a conclusive reason for the discrepancy. New models have been implemented in the ATOMIC opacity code for low-Z elements [Colgan, 2013, Armstrong 2014], however no data currently exists to test the low-Z material models in the regime relevant to the solar convection zone. We present an experimental design using the opacity platform developed at the National Ignition Facility to study the oxygen opacity at densities and temperatures near the solar convection zone conditions. This work is funded by the U.S. DOE, through the NNSA-DS and SC-OFES Joint Program in HEDLP, Grant Number DE-NA0002956, and the NLUF Program, Grant Number DE-NA0002719, and through the LLE, University of Rochester by the NNSA/OICF under No. DE-NA0001944.

  8. "INDEPENDENT CONFIRMATORY SURVEY SUMMARY AND RESULTS FOR THE FORD NUCLEAR REACTOR, REVISION 1, ANN ARBOR, MICHIGAN

    Energy Technology Data Exchange (ETDEWEB)

    ALTIC, NICK A

    2013-08-01

    At the NRC's request, ORAU conducted confirmatory surveys of the FNR during the period of December 4 through 6, 2012. The survey activities included visual inspections and measurement and sampling activities. Confirmatory activities also included the review and assessment of UM's project documentation and methodologies. Surface scans identified elevated activity in two areas. The first area was on a wall outside of Room 3103 and the second area was in the southwest section on the first floor. The first area was remediated to background levels. However, the second area was due to gamma shine from a neighboring source storage area. A retrospective analysis of UM's FSS data shows that for the SUs investigated by the ORAU survey team, UM met the survey requirements set forth in the FSSP. The total mean surface activity values were directly compared with the mean total surface activity reported by UM. Mean surface activity values determined by UM were within two standard deviations of the mean determined by ORAU. Additionally, all surface activity values were less than the corresponding gross beta DCGL{sub W}. Laboratory analysis of the soil showed that COC concentrations were less than the respective DCGL{sub W} values. For the inter-lab comparison, the DER was above 3 for only one sample. However, since the sum of fractions for each of the soil samples was below 1, thus none of the samples would fail to meet release guidelines. Based on the findings of the side-by-side direct measurements, and after discussion with the NRC and ORAU, UM decided to use a more appropriate source efficiency in their direct measurement calculations and changed their source efficiency from 0.37 to 0.25.

  9. INDEPENDENT CONFIRMATORY SURVEY SUMMARY AND RESULTS FOR THE FORD NUCLEAR REACTOR, ANN ARBOR, MICHIGAN

    Energy Technology Data Exchange (ETDEWEB)

    ALTIC, NICK A

    2013-07-25

    At the NRC's request, ORAU conducted confirmatory surveys of the FNR during the period of December 4 through 6, 2012. The survey activities included visual inspections and measurement and sampling activities. Confirmatory activities also included the review and assessment of UM's project documentation and methodologies. Surface scans identified elevated activity in two areas. The first area was on a wall outside of Room 3103 and the second area was in the southwest section on the first floor. The first area was remediated to background levels. However, the second area was due to gamma shine from a neighboring source storage area. A retrospective analysis of UM's FSS data shows that for the SUs investigated by the ORAU survey team, UM met the survey requirements set forth in the FSSP. The total mean surface activity values were directly compared with the mean total surface activity reported by UM. Mean surface activity values determined by UM were within two standard deviations of the mean determined by ORAU. Additionally, all surface activity values were less than the corresponding gross beta DCGLW. Laboratory analysis of the soil showed that COC concentrations were less than the respective DCGLW values. For the inter-lab comparison, the DER was above 3 for only one sample. However, since the sum of fractions for each of the soil samples was below 1, thus none of the samples would fail to meet release guidelines. Based on the findings of the side-by-side direct measurements, and after discussion with the NRC and ORAU, UM decided to use a more appropriate source efficiency in their direct measurement calculations and changed their source efficiency from 0.37 to 0.25.

  10. Measuring Networking as an Outcome Variable in Undergraduate Research Experiences.

    Science.gov (United States)

    Hanauer, David I; Hatfull, Graham

    2015-01-01

    The aim of this paper is to propose, present, and validate a simple survey instrument to measure student conversational networking. The tool consists of five items that cover personal and professional social networks, and its basic principle is the self-reporting of degrees of conversation, with a range of specific discussion partners. The networking instrument was validated in three studies. The basic psychometric characteristics of the scales were established by conducting a factor analysis and evaluating internal consistency using Cronbach's alpha. The second study used a known-groups comparison and involved comparing outcomes for networking scales between two different undergraduate laboratory courses (one involving a specific effort to enhance networking). The final study looked at potential relationships between specific networking items and the established psychosocial variable of project ownership through a series of binary logistic regressions. Overall, the data from the three studies indicate that the networking scales have high internal consistency (α = 0.88), consist of a unitary dimension, can significantly differentiate between research experiences with low and high networking designs, and are related to project ownership scales. The ramifications of the networking instrument for student retention, the enhancement of public scientific literacy, and the differentiation of laboratory courses are discussed. © 2015 D. I. Hanauer and G. Hatfull. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  11. Emotional Intelligence and Nurse Recruitment: Rasch and confirmatory factor analysis of the trait emotional intelligence questionnaire short form.

    Science.gov (United States)

    Snowden, Austyn; Watson, Roger; Stenhouse, Rosie; Hale, Claire

    2015-12-01

    To examine the construct validity of the Trait Emotional Intelligence Questionnaire Short form. Emotional intelligence involves the identification and regulation of our own emotions and the emotions of others. It is therefore a potentially useful construct in the investigation of recruitment and retention in nursing and many questionnaires have been constructed to measure it. Secondary analysis of existing dataset of responses to Trait Emotional Intelligence Questionnaire Short form using concurrent application of Rasch analysis and confirmatory factor analysis. First year undergraduate nursing and computing students completed Trait Emotional Intelligence Questionnaire-Short Form in September 2013. Responses were analysed by synthesising results of Rasch analysis and confirmatory factor analysis. Participants (N = 938) completed Trait Emotional Intelligence Questionnaire Short form. Rasch analysis showed the majority of the Trait Emotional Intelligence Questionnaire-Short Form items made a unique contribution to the latent trait of emotional intelligence. Five items did not fit the model and differential item functioning (gender) accounted for this misfit. Confirmatory factor analysis revealed a four-factor structure consisting of: self-confidence, empathy, uncertainty and social connection. All five misfitting items from the Rasch analysis belonged to the 'social connection' factor. The concurrent use of Rasch and factor analysis allowed for novel interpretation of Trait Emotional Intelligence Questionnaire Short form. Much of the response variation in Trait Emotional Intelligence Questionnaire Short form can be accounted for by the social connection factor. Implications for practice are discussed. © 2015 John Wiley & Sons Ltd.

  12. A motivational account of the undergraduate experience in science: brief measures of students' self-system appraisals, engagement in coursework, and identity as a scientist

    Science.gov (United States)

    Skinner, Ellen; Saxton, Emily; Currie, Cailin; Shusterman, Gwen

    2017-11-01

    As part of long-standing efforts to promote undergraduates' success in science, researchers have investigated the instructional strategies and motivational factors that promote student learning and persistence in science coursework and majors. This study aimed to create a set of brief measures that educators and researchers can use as tools to examine the undergraduate motivational experience in science classes. To identify key motivational processes, we drew on self-determination theory (SDT), which holds that students have fundamental needs - to feel competent, related, and autonomous - that fuel their intrinsic motivation. When educational experiences meet these needs, students engage more energetically and learn more, cumulatively contributing to a positive identity as a scientist. Based on information provided by 1013 students from 8 classes in biology, chemistry, and physics, we constructed conceptually focused and psychometrically sound survey measures of three sets of motivational factors: (1) students' appraisals of their own competence, autonomy, and relatedness; (2) the quality of students' behavioural and emotional engagement in academic work; and (3) students' emerging identities as scientists, including their science identity, purpose in science, and science career plans. Using an iterative confirmatory process, we tested short item sets for unidimensionality and internal consistency, and then cross-validated them. Tests of measurement invariance showed that scales were generally comparable across disciplines. Most importantly, scales and final course grades showed correlations consistent with predictions from SDT. These measures may provide a window on the student motivational experience for educators, researchers, and interventionists who aim to improve the quality of undergraduate science teaching and learning.

  13. Physics Metacognition Inventory Part II: Confirmatory factor analysis and Rasch analysis

    Science.gov (United States)

    Taasoobshirazi, Gita; Bailey, MarLynn; Farley, John

    2015-11-01

    The Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. In one of our earlier studies, an exploratory factor analysis provided evidence of preliminary construct validity, revealing six components of students' metacognition when solving physics problems including knowledge of cognition, planning, monitoring, evaluation, debugging, and information management. The college students' scores on the inventory were found to be reliable and related to students' physics motivation and physics grade. However, the results of the exploratory factor analysis indicated that the questionnaire could be revised to improve its construct validity. The goal of this study was to revise the questionnaire and establish its construct validity through a confirmatory factor analysis. In addition, a Rasch analysis was applied to the data to better understand the psychometric properties of the inventory and to further evaluate the construct validity. Results indicated that the final, revised inventory is a valid, reliable, and efficient tool for assessing student metacognition for physics problem solving.

  14. Structural validity of the Pittsburgh Sleep Quality Index in Chinese undergraduate students: A confirmatory factor analysis

    Directory of Open Access Journals (Sweden)

    Suran Guo

    2016-08-01

    Full Text Available The purpose of this study was to examine the structural validity of the Pittsburgh Sleep Quality Index (PSQI in Chinese undergraduate students. A cross-sectional questionnaire survey with 631 Chinese undergraduate students was conducted, and the questionnaire package included a measure of demographic characteristics, Pittsburgh Sleep Quality Index (PSQI, Chinese editions of Center for Epidemiologic Studies-Depression, State- Trait Anxiety Inventory, Rumination Response Scale, and Perceived Social Support Scale. Results showed that the item use of sleep medicine was not suitable for use with this population, that a two-factor model provided the best fit to the data as assessed through confirmatory factor analysis, and that other indices were consistently correlated with the sleep quality but not the sleep efficiency factor.

  15. The structure of PTSD symptoms: a test of alternative models using confirmatory factor analysis.

    Science.gov (United States)

    Elklit, Ask; Shevlin, Mark

    2007-09-01

    This study aimed to examine the structure of self-reported post-traumatic stress disorder (PTSD) symptoms. Based on previous factor analytic findings and the DSM-IV formulation, six confirmatory factor models were specified and estimated that reflected different symptom clusters. The analyses were based on responses from 1116 participants who had suffered whiplash injuries and screened for full or subclinical PTSD using the Harvard Trauma Questionnaire. A correlated four-factor model with re-experiencing, avoidance, dysphoria and arousal factors fitted the data very well. Correlations with criteria measures showed that these factors were associated with other trauma related variables in a theoretically predictable way and showed evidence of unique predictive utility. These results concur with previous research findings using different trauma populations but do not reflect the current DSM-IV symptom groupings.

  16. Evidence-Based Practice Questionnaire: A Confirmatory Factor Analysis in a Social Work Sample

    Directory of Open Access Journals (Sweden)

    Karen Rice

    2010-10-01

    Full Text Available This study examined the psychometric properties of the Evidence-Based Practice Questionnaire (EBPQ. The 24-item EBPQ was developed to measure health professionals’ attitudes toward, knowledge of, and use of evidence-based practice (EBP. A confirmatory factor analysis was performed on the EBPQ given to a random sample of National Association of Social Work members (N = 167. The coefficient alpha of the EBPQ was .93. The study supported a 23-item 3-factor model with acceptable model fit indices (χ² = 469.04; RMSEA = .081; SRMR = .068; CFI = .900. This study suggests a slightly modified EBPQ may be a useful tool to assess social workers’ attitudes toward, knowledge of, and use of EBP.

  17. Confirmatory factor analysis of posttraumatic stress symptoms in sexually harassed women.

    Science.gov (United States)

    Palmieri, Patrick A; Fitzgerald, Louise F

    2005-12-01

    Posttraumatic stress disorder (PTSD) factor analytic research to date has not provided a clear consensus on the structure of posttraumatic stress symptoms. Seven hypothesized factor structures were evaluated using confirmatory factor analysis of the Posttraumatic Stress Disorder Checklist, a paper-and-pencil measure of posttraumatic stress symptom severity, in a sample of 1,218 women who experienced a broad range of workplace sexual harassment. The model specifying correlated re-experiencing, effortful avoidance, emotional numbing, and hyperarousal factors provided the best fit to the data. Virtually no support was obtained for the Diagnostic and Statistical Manual of Mental Disorders, fourth edition (DSM-IV; American Psychiatric Association, 1994) three-factor model of re-experiencing, avoidance, and hyperarousal factors. Different patterns of correlations with external variables were found for the avoidance and emotional numbing factors, providing further validation of the supported model.

  18. Measuring experience of hospitality : scale development and validation

    NARCIS (Netherlands)

    Pijls-Hoekstra, Ruth; Groen, Brenda H.; Galetzka, Mirjam; Pruyn, Adriaan T.H.

    This paper describes the development of the Experience of Hospitality Scale (EH-Scale) for assessing hospitality in service environments from a guest point of view. In contrast to other scales, which focus specifically on staff behaviour, the present scale focuses on the experience of hospitality

  19. Experiments to measure the gluon helicity distribution in protons

    International Nuclear Information System (INIS)

    Spinka, H.; Beddo, M.E.; Underwood, D.G.

    1993-01-01

    Several experiments are described that could obtain information about the gluon helicity distribution in protons. These experiments include inclusive direct-γ, direct-γ + jet, jet, and jet + jet production with colliding beams of longitudinally-polarized protons. Some rates and kinematics are also discussed

  20. Infrasonic measurements of the Non-Proliferation Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Whitaker, R.W.; Noel, S.; Meadows, W. [Los Alamos National Laboratory, NM (United States)

    1994-12-31

    Two infrasonic arrays were operated for the Non-Proliferation Experiment (NPE). The arrays were located at the Nevada Test Site and at St. George, UT. The results were consistent with experience on underground tests, and therefore close to underground nuclear tests of similar size.

  1. Confirmatory Factor Analysis of the "World Health Organization Quality of Life Questionnaire--Brief Version" for Individuals with Spinal Cord Injury

    Science.gov (United States)

    Miller, Susan M.; Chan, Fong; Ferrin, James M.; Lin, Chen-Ping; Chan, Jacob Y. C.

    2008-01-01

    This study examined the factorial structure of the "World Health Organization Quality of Life Questionnaire--Brief Version" in a community sample of Canadians with spinal cord injuries. A confirmatory factor analysis provides evidence that the instrument is a multidimensional measure of quality of life. Additionally, the questionnaire is…

  2. Development and validation of the Patient Experience with Treatment and Self-management (PETS): a patient-reported measure of treatment burden.

    Science.gov (United States)

    Eton, David T; Yost, Kathleen J; Lai, Jin-Shei; Ridgeway, Jennifer L; Egginton, Jason S; Rosedahl, Jordan K; Linzer, Mark; Boehm, Deborah H; Thakur, Azra; Poplau, Sara; Odell, Laura; Montori, Victor M; May, Carl R; Anderson, Roger T

    2017-02-01

    The purpose of this study was to develop and validate a new comprehensive patient-reported measure of treatment burden-the Patient Experience with Treatment and Self-management (PETS). A conceptual framework was used to derive the PETS with items reviewed and cognitively tested with patients. A survey battery, including a pilot version of the PETS, was mailed to 838 multi-morbid patients from two healthcare institutions for validation. A total of 332 multi-morbid patients returned completed surveys. Diagnostics supported deletion and consolidation of some items and domains. Confirmatory factor analysis supported a domain model for scaling comprised of 9 factors: medical information, medications, medical appointments, monitoring health, interpersonal challenges, medical/healthcare expenses, difficulty with healthcare services, role/social activity limitations, and physical/mental exhaustion. Scales showed good internal consistency (α range 0.79-0.95). Higher PETS scores, indicative of greater treatment burden, were correlated with more distress, less satisfaction with medications, lower self-efficacy, worse physical and mental health, and lower convenience of healthcare (Ps health literacy, less adherence to medications, and more financial difficulties reported higher PETS scores (Ps < 0.01). A comprehensive patient-reported measure of treatment burden can help to better characterize the impact of treatment and self-management burden on patient well-being and guide care toward minimally disruptive medicine.

  3. The Bolund experiment - design of measurement campaign using CFD

    DEFF Research Database (Denmark)

    Bechmann, Andreas; Johansen, Jeppe; Sørensen, Niels N.

    the upcoming measurement campaign. The simulation results are used for estimating rational positions of measuring masts and instrumentation. A total of ten measuring masts are proposed consisting of two 16 m masts, six 9 m masts and two 5 m masts. The masts are instrumented with 12 cup anemometers for mean...

  4. Orion EFT-1 Catalytic Tile Experiment Overview and Flight Measurements

    Science.gov (United States)

    Salazar, Giovanni; Amar, Adam; Hyatt, Andrew; Rezin, Marc D.

    2016-01-01

    This paper describes the design and results of a surface catalysis flight experiment flown on the Orion Multipurpose Crew Vehicle during Exploration Flight Test 1 (EFT1). Similar to previous Space Shuttle catalytic tile experiments, the present test consisted of a highly catalytic coating applied to an instrumented TPS tile. However, the present catalytic tile experiment contained significantly more instrumentation in order to better resolve the heating overshoot caused by the change in surface catalytic efficiency at the interface between two distinct materials. In addition to collecting data with unprecedented spatial resolution of the "overshoot" phenomenon, the experiment was also designed to prove if such a catalytic overshoot would be seen in turbulent flow in high enthalpy regimes. A detailed discussion of the results obtained during EFT1 is presented, as well as the challenges associated with data interpretation of this experiment. Results of material testing carried out in support of this flight experiment are also shown. Finally, an inverse heat conduction technique is employed to reconstruct the flight environments at locations upstream and along the catalytic coating. The data and analysis presented in this work will greatly contribute to our understanding of the catalytic "overshoot" phenomenon, and have a significant impact on the design of future spacecraft.

  5. The Functional Measurement Experiment Builder suite: two Java-based programs to generate and run functional measurement experiments.

    Science.gov (United States)

    Mairesse, Olivier; Hofmans, Joeri; Theuns, Peter

    2008-05-01

    We propose a free, easy-to-use computer program that does not requires prior knowledge of computer programming to generate and run experiments using textual or pictorial stimuli. Although the FM Experiment Builder suite was initially programmed for building and conducting FM experiments, it can also be applied for non-FM experiments that necessitate randomized, single, or multifactorial designs. The program is highly configurable, allowing multilingual use and a wide range of different response formats. The outputs of the experiments are Microsoft Excel compatible .xls files that allow easy copy-paste of the results into Weiss's FM CalSTAT program (2006) or any other statistical package. Its Java-based structure is compatible with both Windows and Macintosh operating systems, and its compactness (< 1 MB) makes it easily distributable over the Internet.

  6. Confirmatory Factor Analysis of the ISB - Burnout Syndrome Inventory

    Directory of Open Access Journals (Sweden)

    Ana Maria T. Benevides-Pereira

    2017-05-01

    Full Text Available AimBurnout is a dysfunctional reaction to chronic occupational stress. The present study analysis the psychometric qualities of the Burnout Syndrome Inventory (ISB through Confirmatory Factor Analysis (CFA.MethodEmpirical study in a multi-centre and multi-occupational sample (n = 701 using the ISB. The Part I assesses antecedent factors: Positive Organizational Conditions (PC and Negative Organizational Conditions (NC. The Part II assesses the syndrome: Emotional Exhaustion (EE, Dehumanization (DE, Emotional Distancing (ED and Personal Accomplishment (PA.ResultsThe highest means occurred in the positive scales CP (M = 23.29, SD = 5.89 and PA (M = 14.84, SD = 4.71. Negative conditions showed the greatest variability (SD = 6.03. Reliability indexes were reasonable, with the lowest rate at .77 for DE and the highest rate .91 for PA. The CFA revealed RMSEA = .057 and CFI = .90 with all scales regressions showing significant values (β = .73 until β = .92.ConclusionThe ISB showed a plausible instrument to evaluate burnout. The two sectors maintained the initial model and confirmed the theoretical presupposition. This instrument makes possible a more comprehensive idea of the labour context, and one or another part may be used separately according to the needs and the aims of the assessor.

  7. Workplace Innovation: Exploratory and Confirmatory Factor Analysis for Construct Validation

    Directory of Open Access Journals (Sweden)

    Wipulanusat Warit

    2017-06-01

    Full Text Available Workplace innovation enables the development and improvement of products, processes and services leading simultaneously to improvement in organisational performance. This study has the purpose of examining the factor structure of workplace innovation. Survey data, extracted from the 2014 APS employee census, comprising 3,125 engineering professionals in the Commonwealth of Australia’s departments were analysed using exploratory factor analysis (EFA and confirmatory factor analysis (CFA. EFA returned a two-factor structure explaining 69.1% of the variance of the construct. CFA revealed that a two-factor structure was indicated as a validated model (GFI = 0.98, AGFI = 0.95, RMSEA = 0.08, RMR = 0.02, IFI = 0.98, NFI = 0.98, CFI = 0.98, and TLI = 0.96. Both factors showed good reliability of the scale (Individual creativity: α = 0.83, CR = 0.86, and AVE = 0.62; Team Innovation: α = 0.82, CR = 0.88, and AVE = 0.61. These results confirm that the two factors extracted for characterising workplace innovation included individual creativity and team innovation.

  8. CT findings as confirmatory criteria of brain death

    International Nuclear Information System (INIS)

    Shiogai, Toshiyuki; Takeuchi, Kazuo

    1983-01-01

    The absence of cerebral circulation and electrocerebral silence have served as an accurate index of irreversible brain death. It is proposed that computed tomography (CT) findings be evaluated as confirmatory criteria of brain death. To this end, CT evaluation of 14 patients satisfying the conventional criteria of brain death was performed. A CT finding of severe compression or dissappearance of the ventricular system, or so called ''brain tamponade'', was seen in 7 (50 %) of the 14 patients. Enhanced contrast CT, especially dynamic CT, usually distinctly reveals the cerebral vessels whenever the cerebral blood flow is preserved; conversely, the lack of enhanced brain structures, even comparing attenuation values, indicates the absence of cerebral blood flow. In 7 (70 %) of 10 patients, however, there was enhanced contrast of vascular brain structures, especially the circle of Willis, major cerebral arteries, choroid plexuses, and venous sinuses. It is suggested that this result is due to the improvement of demonstrability by CT. The usefulness of CT in the confirmation of brain death lies in visualization of the pathological changes associated with a dead brain, such as ''brain tamponade'', and the lack of enhanced contrast indicating the absence of cerebral blood flow. The latter point is still problematic as angiography revealed an extremely low cerebral blood flow in a few cases of ''dead brain'' patients. It is recommended that cerebral blood flow in brain death be evaluated by dynamic CT scanning and correlated with other methods of cerebral blood flow determination (e.g., intravenous digital subtraction angiography). (Author)

  9. Confirmatory simulation of safety and operational transients in LMFBR systems

    International Nuclear Information System (INIS)

    Guppy, J.G.; Agrawal, A.K.

    1978-01-01

    Operational and safety transients (anticipated, unlikely, or extremely unlikely) that may originate anywhere in a liquid-metal fast breeder reactor (LMFBR) system must be adequately simulated to assist in safety evaluation and plant design efforts. An advanced thermohydraulic transient code, the Super System Code (SSC), is described that may be used for confirmatory safety evaluations of plant-wide events, such as assurance of adequate decay heat removal capability under natural circulation conditions. Results obtained with SSC illustrating the degree of modeling detail present in the code as well as the computing efficiency are presented. A version of the SSC code, SSC-L, applicable to any loop-type LMFBR design, has been developed at Brookhaven. The scope of SSC-L is to enable the simulation of all plant-wide transients covered by Plant Protection System (PPS) action, including sodium pipe rupture and coastdown to natural circulation conditions. The computations are stopped when loss of core integrity (i.e., clad melting temperature exceeded) is indicated

  10. Confirmatory factor analysis applied to the Force Concept Inventory

    Science.gov (United States)

    Eaton, Philip; Willoughby, Shannon D.

    2018-06-01

    In 1995, Huffman and Heller used exploratory factor analysis to draw into question the factors of the Force Concept Inventory (FCI). Since then several papers have been published examining the factors of the FCI on larger sets of student responses and understandable factors were extracted as a result. However, none of these proposed factor models have been verified to not be unique to their original sample through the use of independent sets of data. This paper seeks to confirm the factor models proposed by Scott et al. in 2012, and Hestenes et al. in 1992, as well as another expert model proposed within this study through the use of confirmatory factor analysis (CFA) and a sample of 20 822 postinstruction student responses to the FCI. Upon application of CFA using the full sample, all three models were found to fit the data with acceptable global fit statistics. However, when CFA was performed using these models on smaller sample sizes the models proposed by Scott et al. and Eaton and Willoughby were found to be far more stable than the model proposed by Hestenes et al. The goodness of fit of these models to the data suggests that the FCI can be scored on factors that are not unique to a single class. These scores could then be used to comment on how instruction methods effect the performance of students along a single factor and more in-depth analyses of curriculum changes may be possible as a result.

  11. Confirmatory spirometry for adults hospitalized with a diagnosis of asthma or chronic obstructive pulmonary disease exacerbation

    Science.gov (United States)

    2012-01-01

    Background Objective measurement of airflow obstruction by spirometry is an essential part of the diagnosis of asthma or COPD. During exacerbations, the feasibility and utility of spirometry to confirm the diagnosis of asthma or chronic obstructive pulmonary disease (COPD) are unclear. Addressing these gaps in knowledge may help define the need for confirmatory testing in clinical care and quality improvement efforts. This study was designed to determine the feasibility of spirometry and to determine its utility to confirm the diagnosis in patients hospitalized with a physician diagnosis of asthma or COPD exacerbation. Methods Multi-center study of four academic healthcare institutions. Spirometry was performed in 113 adults admitted to general medicine wards with a physician diagnosis of asthma or COPD exacerbation. Two board-certified pulmonologists evaluated the spirometry tracings to determine the proportion of patients able to produce adequate quality spirometry data. Findings were interpreted to evaluate the utility of spirometry to confirm the presence of obstructive lung disease, according to the 2005 European Respiratory Society/American Thoracic Society recommendations. Results There was an almost perfect agreement for acceptability (κ = 0.92) and reproducibility (κ =0.93) of spirometry tracings. Three-quarters (73%) of the tests were interpreted by both pulmonologists as being of adequate quality. Of these adequate quality tests, 22% did not present objective evidence of obstructive lung disease. Obese patients (BMI ≥30 kg/m2) were more likely to produce spirometry tracings with no evidence of obstructive lung disease, compared to non-obese patients (33% vs. 8%, p = 0.007). Conclusions Adequate quality spirometry can be obtained in most hospitalized adults with a physician diagnosis of asthma or COPD exacerbation. Confirmatory spirometry could be a useful tool to help reduce overdiagnosis of obstructive lung disease, especially among obese

  12. Measurement of Critical Contact Angle in a Microgravity Space Experiment

    Science.gov (United States)

    Concus, P.; Finn, R.; Weislogel, M.

    1998-01-01

    Mathematical theory predicts that small changes in container shape or in contact angle can give rise to large shifts of liquid in a microgravity environment. This phenomenon was investigated in the Interface Configuration Experiment on board the USMT,2 Space Shuttle flight. The experiment's "double proboscis" containers were designed to strike a balance between conflicting requirements of sizable volume of liquid shift (for ease of observation) and abruptness of the shift (for accurate determination of critical contact angle). The experimental results support the classical concept of macroscopic contact angle and demonstrate the role of hysteresis in impeding orientation toward equilibrium.

  13. Measurement of the W boson mass in the Delphi experiment

    International Nuclear Information System (INIS)

    Simard, L.

    2000-01-01

    After the Z 0 study during the first phase of LEP, the properties of the W boson, in particular its mass, are precisely measured at LEP2. After the implications of that measurement on the Higgs mass being explained, the analysis of the WW semileptonic events, where the two W decay into two quarks, a charged lepton and a neutrino, is described. It was carried out with the data sample collected at DELPHI in 1997 and 1998, corresponding to an integrated luminosity of 211.1 pb -1 . The measurement, based upon a likelihood fit applied both to simulation and data requires that all variables of simulation reproduce well the data. Comparisons between Monte Carlo and data are set out, as well as the selection of WW events and the kinematical fit used to improve the mass resolution. The method used to estimate the systematic errors on the measurement and the result of the measurement are presented. When combining these measurements with the measurements done in the hadronic channel, the mass and the width are measured. (author)

  14. Intra-operative parathyroid hormone measurementsexperience of ...

    African Journals Online (AJOL)

    Background. Surgery is the treatment of choice for symptomatic primary hyperparathyroidism. The majority of research concerning intra-operative parathyroid hormone (ioPTH) measurements is conducted in university hospitals. Whether ioPTH measurements are feasible and useful in predicting the presence of remaining ...

  15. Measuring the Quality of the Website User Experience

    Science.gov (United States)

    Sauro, Jeff

    2016-01-01

    Consumers spend an increasing amount of time and money online finding information, completing tasks, or making purchases. The quality of the website experience has become a key differentiator for organizations--affecting whether they purchase and their likelihood to return and recommend a website to friends. Two instruments were created to more…

  16. Fatigue in rheumatoid arthritis: from patient experience to measurement

    NARCIS (Netherlands)

    Nikolaus, Stephanie

    2012-01-01

    Many patients with rheumatoid arthritis (RA) complain about fatigue. In-depths interviews with patients showed that fatigue is experienced as an annoying symptom that can have far-reaching consequences for daily life. However, not each patient has the same experience of fatigue: emotions,

  17. Measuring Client Experiences of Motivational Interviewing during a Lifestyle Intervention

    Science.gov (United States)

    Madson, Michael B.; Mohn, Richard S.; Schumacher, Julie A.; Landry, Alicia S.

    2015-01-01

    The Client Evaluation of Motivational Interviewing was used to assess motivational interviewing experiences in a predominantly female, African American sample from the Southeastern United States who received motivational interviewing-based feedback during a multicomponent lifestyle intervention. Motivational interviewing was experienced…

  18. Measuring Customer Experience in Bancassurance: An Empirical Study

    Directory of Open Access Journals (Sweden)

    Mousumi Choudhury

    2016-06-01

    Full Text Available Purpose – This study attempts to investigate customer experience with respect to the bancassurance channel. Design/Methodology/Approach – The study is based on primary data collected using a structured questionnaire from customers buying life insurance policies from SBI Life through different branches of State Bank of India in the city of Guwahati in the state of Assam, India. Cronbach’s alpha was used to test the reliability of the questionnaire. Statistical tools, such as mean, standard deviation, and factor analysis were used to attain the objective of the study. Findings and implications – The study found that customers have favorable experiences when buying life insurance through the bancassurance channel. There are seven core factors that affect customer experience in bancassurance: ease of buying, whether maturity benefit is received, reliability of the channel, responsiveness of the channel, after-sale services, stock market-related information, and accuracy of the channel. Banks should devise a strategy to sustain favorable experiences of their customers, as this enables banks to retain their existing customers while also attracting new ones. Limitation – The study is restricted to customers buying life insurance policy from various branches of State Bank of India in Guwahati, India. Therefore, longitudinal and cross-sectional research is needed to generalize the findings. Originality – The study is first of its kind and hence original in nature.

  19. Direct photon measurements by the D OE experiment

    International Nuclear Information System (INIS)

    Abachi, S.

    1996-07-01

    We report a measurement of the cross section for production of isolated photons with transverse energy E T > 12 GeV in the central (absolute value of η -1 . The cross section is compared with a next-to-leading order (NLO) QCD calculation. We also present preliminary measurements of the center of mass scattering angle distribution and of the correlations between the rapidity of the photon and that of the leading jet in the event

  20. Experience of precision measuring distances by invar wires at accelerators

    International Nuclear Information System (INIS)

    Porubaj, N.I.

    1977-01-01

    With a view to determining the deformations and displacements of the ring foundation of the ITEP accelerator, the method of very accurate distance measurements by means of invar wires and strips is described. Measurement errors are analyzed. This method has allowed to measure distances up to 40 m with a mean-square error of less than 40 μm. The calibration accuracy of 3 and 25-m measuring wires has been determined to be +- 27 μm. Time instability of the wires is +- 16 μm. It is shown that strips are more stable in time than wires. Elongation of 6, 19, 25 and 38 m invar wires has been measured as function of the tension time. The error due to tension of a 38-m wire may be tangible. Data on thermal coefficient variation in time has been obtained for invar wires and strips. The multiannual measurements of the ring foundation deformations show that variations of the mean radius are caused by increases of concrete temperature. Temperature increase by only 1 deg caused mean radius increase of 0.3 mm

  1. How Good is Your User Experience? Measuring and Designing Interactions

    Directory of Open Access Journals (Sweden)

    Wildner Raimund

    2015-11-01

    Full Text Available Form and function are important dimensions of consumer choice, but there is more in our increasingly digital world. It is not only products per se that need to be designed but the whole interaction between consumers and brands. The whole UX or user experience is more important than ever before. Digitalism nowadays is everywhere, and even mundane products are becoming more digital (e.g. ovens, while others evolve that are purely digital (e.g. PayPal.

  2. CT findings as confirmatory criteria of brain death

    Energy Technology Data Exchange (ETDEWEB)

    Shiogai, Toshiyuki; Takeuchi, Kazuo (Kyorin Univ., Mitaka, Tokyo (Japan). School of Medicine)

    1983-12-01

    The absence of cerebral circulation and electrocerebral silence have served as an accurate index of irreversible brain death. It is proposed that computed tomography (CT) findings be evaluated as confirmatory criteria of brain death. To this end, CT evaluation of 14 patients satisfying the conventional criteria of brain death was performed. A CT finding of severe compression or dissappearance of the ventricular system, or so called ''brain tamponade'', was seen in 7 (50 %) of the 14 patients. Enhanced contrast CT, especially dynamic CT, usually distinctly reveals the cerebral vessels whenever the cerebral blood flow is preserved; conversely, the lack of enhanced brain structures, even comparing attenuation values, indicates the absence of cerebral blood flow. In 7 (70 %) of 10 patients, however, there was enhanced contrast of vascular brain structures, especially the circle of Willis, major cerebral arteries, choroid plexuses, and venous sinuses. It is suggested that this result is due to the improvement of demonstrability by CT. The usefulness of CT in the confirmation of brain death lies in visualization of the pathological changes associated with a dead brain, such as ''brain tamponade'', and the lack of enhanced contrast indicating the absence of cerebral blood flow. The latter point is still problematic as angiography revealed an extremely low cerebral blood flow in a few cases of ''dead brain'' patients. It is recommended that cerebral blood flow in brain death be evaluated by dynamic CT scanning and correlated with other methods of cerebral blood flow determination (e.g., intravenous digital subtraction angiography).

  3. LDV-measurements in pipe-flow problems and experiences

    International Nuclear Information System (INIS)

    Els, H.; Rouve, G.

    1985-01-01

    Measurements with LDV-technique in circular cross-sections cause optical problems. When not using an index matching fluid, the index differences between air, wall and fluid cause a poor definition. Horizontal beams and vertical beams do not intersect in the same point. This makes two-component measurements impossible and gives a very bad signal quality even at forward-scatter one-component measurements. Besides the index matching, supplementary lenses can solve this problem. Lenses, which perfectly adjust the difference between horizontal and vertical beams, and difficult to calculate and - even more - to manufacture in an average equipped workshop. IWW developed a number of single-curvature lenses, which do not give perfect accordance of the beams, but increase the signal quality distinctively and thus noticeably decrease the needed time to measure a whole grid in the circular cross-section. Besides that, they are easy to produce. These lenses are described and the needed correction formula given in this paper. Other correction techniques are discussed, some measurement results with the used equipment are shown

  4. Measuring Black Men’s Police-Based Discrimination Experiences: Development and Validation of the Police and Law Enforcement (PLE) Scale

    Science.gov (United States)

    English, Devin; Bowleg, Lisa; del Río-González, Ana Maria; Tschann, Jeanne M.; Agans, Robert; Malebranche, David J

    2017-01-01

    Objectives Although social science research has examined police and law enforcement-perpetrated discrimination against Black men using policing statistics and implicit bias studies, there is little quantitative evidence detailing this phenomenon from the perspective of Black men. Consequently, there is a dearth of research detailing how Black men’s perspectives on police and law enforcement-related stress predict negative physiological and psychological health outcomes. This study addresses these gaps with the qualitative development and quantitative test of the Police and Law Enforcement (PLE) scale. Methods In Study 1, we employed thematic analysis on transcripts of individual qualitative interviews with 90 Black men to assess key themes and concepts and develop quantitative items. In Study 2, we used 2 focus groups comprised of 5 Black men each (n=10), intensive cognitive interviewing with a separate sample of Black men (n=15), and piloting with another sample of Black men (n=13) to assess the ecological validity of the quantitative items. For study 3, we analyzed data from a sample of 633 Black men between the ages of 18 and 65 to test the factor structure of the PLE, as we all as its concurrent validity and convergent/discriminant validity. Results Qualitative analyses and confirmatory factor analyses suggested that a 5-item, 1-factor measure appropriately represented respondents’ experiences of police/law enforcement discrimination. As hypothesized, the PLE was positively associated with measures of racial discrimination and depressive symptoms. Conclusions Preliminary evidence suggests that the PLE is a reliable and valid measure of Black men’s experiences of discrimination with police/law enforcement. PMID:28080104

  5. Broadband Laser Ranging for Position Measurements in Shock Physics Experiments

    Science.gov (United States)

    Rhodes, Michelle; Bennett, Corey; Daykin, Edward; Younk, Patrick; Lalone, Brandon; Kostinski, Natalie

    2017-06-01

    Broadband laser ranging (BLR) is a recently developed measurement system that provides an attractive option for determining the position of shock-driven surfaces. This system uses broadband, picosecond (or femtosecond) laser pulses and a fiber interferometer to measure relative travel time to a target and to a reference mirror. The difference in travel time produces a delay difference between pulse replicas that creates a spectral beat frequency. The spectral beating is recorded in real time using a dispersive Fourier transform and an oscilloscope. BLR systems have been designed that measure position at 12.5-40 MHz with better than 100 micron accuracy over ranges greater than 10 cm. We will give an overview of the basic operating principles of these systems. Prepared by LLNL under Contract DE-AC52-07NA27344, by LANL under Contract DE-AC52-06NA25396, and by NSTec Contract DE-AC52-06NA25946.

  6. Virtual and remote experiments for radiometric and photometric measurements

    International Nuclear Information System (INIS)

    Thoms, L-J; Girwidz, R

    2017-01-01

    The analysis of spectra is fundamental to our modern understanding of wave optics and colour perception. Since spectrometers are expensive, and accurate calibration is necessary to achieve high quality spectra, we developed a remote lab on optical spectrometry. With this tool, students can carry out real experiments over the Internet. In this article the pros and cons of remote labs, the physical background of optical spectrometry, and the development and use of a radiometric remote lab for higher education are discussed. The remote lab is freely accessible to everyone at http://virtualremotelab.net. (paper)

  7. Virtual and remote experiments for radiometric and photometric measurements

    Science.gov (United States)

    Thoms, L.-J.; Girwidz, R.

    2017-09-01

    The analysis of spectra is fundamental to our modern understanding of wave optics and colour perception. Since spectrometers are expensive, and accurate calibration is necessary to achieve high quality spectra, we developed a remote lab on optical spectrometry. With this tool, students can carry out real experiments over the Internet. In this article the pros and cons of remote labs, the physical background of optical spectrometry, and the development and use of a radiometric remote lab for higher education are discussed. The remote lab is freely accessible to everyone at http://virtualremotelab.net.

  8. Valuing Informal Care Experience: Does Choice of Measure Matter?

    Science.gov (United States)

    Mentzakis, Emmanouil; McNamee, Paul; Ryan, Mandy; Sutton, Matthew

    2012-01-01

    Well-being equations are often estimated to generate monetary values for non-marketed activities. In such studies, utility is often approximated by either life satisfaction or General Health Questionnaire scores. We estimate and compare monetary valuations of informal care for the first time in the UK employing both measures, using longitudinal…

  9. Measures of agreement between computation and experiment:validation metrics.

    Energy Technology Data Exchange (ETDEWEB)

    Barone, Matthew Franklin; Oberkampf, William Louis

    2005-08-01

    With the increasing role of computational modeling in engineering design, performance estimation, and safety assessment, improved methods are needed for comparing computational results and experimental measurements. Traditional methods of graphically comparing computational and experimental results, though valuable, are essentially qualitative. Computable measures are needed that can quantitatively compare computational and experimental results over a range of input, or control, variables and sharpen assessment of computational accuracy. This type of measure has been recently referred to as a validation metric. We discuss various features that we believe should be incorporated in a validation metric and also features that should be excluded. We develop a new validation metric that is based on the statistical concept of confidence intervals. Using this fundamental concept, we construct two specific metrics: one that requires interpolation of experimental data and one that requires regression (curve fitting) of experimental data. We apply the metrics to three example problems: thermal decomposition of a polyurethane foam, a turbulent buoyant plume of helium, and compressibility effects on the growth rate of a turbulent free-shear layer. We discuss how the present metrics are easily interpretable for assessing computational model accuracy, as well as the impact of experimental measurement uncertainty on the accuracy assessment.

  10. Experience of the use of radiation measuring instruments for Russia

    International Nuclear Information System (INIS)

    Matsubara, S.; Ohshima, T.; Kawaguti, H.

    1994-01-01

    After the Chernobyl accident, among a series of international cooperations, also from our company T.OHSHIMA visited Russia in October, 1991 as a member of the USSR and Japan Joint Specialist Meeting on Environmental Radiation and Shelter Structure of Chernobyl-4 Nuclear Power Plant, and a few members including H.KAWAGUTI visited there in December, 1991 for the handling instructions of the apparatus delivered to Sasagawa Memorial Health Cooperation Foundation. During these visits to Russia they carried electronic personal dosimeters and pocketsize dose ratemeters, measured the doses and dose rate of some areas including the actual polluted areas and gained interesting data. Especially T.OHSHIMA entered the turbine structure of Chernobyl No.4 Reactor and experienced 7m Sv/h. I introduce these measurement data and the instruments used for the measurement. Also H.KAWAGUTI and others explained the maintenance and handling of the whole body counter loaded into the medical examination car offered to Russia for Chernobyl Sasagawa Medical Care Cooperation Project of Sasagawa Memorial Health Cooperation Foundation. I introduce the outline of this medical examination car laying stress on the whole body counter and present a part of the data by the whole body counter measured during the medical care cooperation. (author)

  11. Velocity measurement accuracy in optical microhemodynamics: experiment and simulation

    International Nuclear Information System (INIS)

    Chayer, Boris; Cloutier, Guy; L Pitts, Katie; Fenech, Marianne

    2012-01-01

    Micro particle image velocimetry (µPIV) is a common method to assess flow behavior in blood microvessels in vitro as well as in vivo. The use of red blood cells (RBCs) as tracer particles, as generally considered in vivo, creates a large depth of correlation (DOC), even as large as the vessel itself, which decreases the accuracy of the method. The limitations of µPIV for blood flow measurements based on RBC tracking still have to be evaluated. In this study, in vitro and in silico models were used to understand the effect of the DOC on blood flow measurements using µPIV RBC tracer particles. We therefore employed a µPIV technique to assess blood flow in a 15 µm radius glass tube with a high-speed CMOS camera. The tube was perfused with a sample of 40% hematocrit blood. The flow measured by a cross-correlating speckle tracking technique was compared to the flow rate of the pump. In addition, a three-dimensional mechanical RBC-flow model was used to simulate optical moving speckle at 20% and 40% hematocrits, in 15 and 20 µm radius circular tubes, at different focus planes, flow rates and for various velocity profile shapes. The velocity profiles extracted from the simulated pictures were compared with good agreement with the corresponding velocity profiles implemented in the mechanical model. The flow rates from both the in vitro flow phantom and the mathematical model were accurately measured with less than 10% errors. Simulation results demonstrated that the hematocrit (paired t tests, p = 0.5) and the tube radius (p = 0.1) do not influence the precision of the measured flow rate, whereas the shape of the velocity profile (p < 0.001) and the location of the focus plane (p < 0.001) do, as indicated by measured errors ranging from 3% to 97%. In conclusion, the use of RBCs as tracer particles makes a large DOC and affects the image processing required to estimate the flow velocities. We found that the current µPIV method is acceptable to estimate the flow rate

  12. Dijets in diffractive photoproduction measured with the ZEUS experiment

    International Nuclear Information System (INIS)

    Renner, R.

    2006-10-01

    The diffractive photoproduction of dijets in electron-proton scattering has been studied using 77.1 pb -1 of data taken with the ZEUS detector at HERA. The measurements have been made at a centre-of- mass energy √s=318 GeV in the kinematic range 0.2 P P is the fraction of the proton momentum taken by the diffractive exchange. The jets have been reconstructed using the k T algorithm. The two jets with the highest transversal energy have been required to satisfy E T >7.5 and 6.5 GeV, respectively, and to be in the pseudorapidity range -1.5<η<1.5. Differential cross sections have been measured and been confronted with the predictions from leading order Monte Carlo simulations and next-to-leading order QCD calculations. (orig.)

  13. openBEB: open biological experiment browser for correlative measurements

    OpenAIRE

    Ramakrishnan, Chandrasekhar; Bieri, Andrej; Sauter, Nora; Roizard, Sophie; Ringler, Philippe; Müller, Shirley A; Goldie, Kenneth N; Enimanev, Kaloyan; Stahlberg, Henning; Rinn, Bernd; Braun, Thomas

    2014-01-01

    Background: New experimental methods must be developed to study interaction networks in systems biology. To reduce biological noise, individual subjects, such as single cells, should be analyzed using high throughput approaches. The measurement of several correlative physical properties would further improve data consistency. Accordingly, a considerable quantity of data must be acquired, correlated, catalogued and stored in a database for subsequent analysis. Results: We have developed openBE...

  14. Angiographic Guidewire with Measuring Markers: Design and Clinical Experience

    International Nuclear Information System (INIS)

    Kamei, Seiji; Ishiguchi, Tsuneo; Murata, Katsuhito; Matsuda, Joe; Ohno, Ryota; Kimura, Junko; Nakamura, Atsushi; Ohno, Kazuko; Kawamura, Toshiki; Ikeda, Mitsuru

    2006-01-01

    Purpose. We have developed an angiographic guidewire with measuring markers to determine accurately how far a guidewire is inserted within a catheter. We investigated whether use of this guidewire reduces the risk of vascular injury and the fluoroscopic time during guidewire manipulations. Methods. Four markers were put on the surface of the guidewire at 80, 100, 110, and 120 cm from the tip. The actual lengths of 54 catheters from seven manufacturers were measured and compared with the nominal lengths. Sixty consecutive patients who underwent angiography were randomized into two groups: in one group guidewires with surface markers were used (marker group) and in the other group, conventional guidewires (control group). For each guidewire insertion, the fluoroscopic time before the guidewire was pushed forward into the vessel lumen was recorded. The number of occasions on which unintentionally the guidewire had already been pushed out of the catheter at the start of fluoroscopy was also evaluated. Results. The actual lengths of all catheters were greater than the nominal lengths by 1.0-11.0 cm. Mean fluoroscopic time for each guidewire insertion was 3.3 sec in the marker group and 5.7 sec in the control group (p < 0.05). Guidewires were unintentionally pushed out of the catheters without fluoroscopy three times (3.6%), in each case in the control group. Conclusion. The guidewire with measuring markers is effective for enhancing safety and in reducing fluoroscopic radiation during angiographic procedures. It is recommended that operators be aware that actual lengths of catheters may vary significantly from the nominal lengths listed; they should be aware of this with any guidewire, but particularly with the angiographic measuring guidewire

  15. An Experiment in Radiation Measurement Using the Depron Instrument

    Science.gov (United States)

    Benghin, Victor V.; Nechaev, Oleg Y.; Zolotarev, Ivan A.; Amelyushkin, Alexander M.; Petrov, Vasiliy L.; Panasyuk, Milhail I.; Yashin, Ivan V.

    2018-02-01

    Most of the radiation measurements have been made onboard spacecraft flying along orbits with an inclination of up to 51.6 degrees. Due to the prospect of manned missions at orbits with larger inclinations, it is advisable to conduct preliminary detailed dosimetry measurements at a high-inclination orbit; due to its polar orbit, the Lomonosov satellite provides good opportunities for such study. We chose a method of cosmic radiation dosimetry based on semiconductor detectors. This method is widely used onboard spacecraft, including full-time radiation monitoring onboard the International Space Station (ISS). It should be noted that not only did the charged particles contribute significantly in the dose equivalent, but also did the neutrons. Semiconductor detectors have low sensitivity to neutron radiation and are not sufficient for detecting the expected flux of neutrons. We add a thermal neutron counter to the proposed device in order to provide an opportunity for estimation of neutron flux variations along the satellite trajectory. Thus, the design of the instrument DEPRON (Dosimeter of Electrons, PROtons and Neutrons) was determined. DEPRON is intended for registration of the absorbed doses and linear energy transfer spectra for high-energy electrons, protons and nuclei of space radiation, as well as registration of thermal neutrons. The present paper provides a brief description of the DEPRON instrument. Its calibration results and the first mission results of background radiation measurements are also presented.

  16. Localized damage in soft rock: experiments with field measurement techniques

    International Nuclear Information System (INIS)

    Nguyen, T.L.

    2011-01-01

    The research presented in this thesis concerns, firstly, an experimental study on the process of fracture in uniaxial compression of rock samples containing narrow, rectilinear notches inclined with respect to the axis of loading. Secondly, we study the evolution of shear strain localisation towards fracturing and failure in specimens of the same materials with a particular geometry, involving two rounded notches. This geometry, inspired by the work of Meuwissen et al. (1998) for tension tests on metals, promotes the localisation of shear strain in simple compression before fracture. Two different materials were studied: a natural rock of volcanic origin (Neapolitan Tuff) and an artificial 'roc' (CPIR09). In the studies presented, three full-field measurement techniques have been employed in combination: (i) the Digital Image Correlation (DIC), for measurement of kinematic fields at a sample's surface; (ii)acoustic Emission measurements (AE) and AE source location, to follow the evolution of damage in samples during loading; (iii) X-ray tomography (pre-and post-mortem studies), to characterise preexisting defects and discontinuities in the specimens and to better understand the fracturing in 3D. (author)

  17. Qualification testing and electrical measurement experience: A manufacturer's view

    Science.gov (United States)

    Arnett, J. C.; Cooley, J. E.; Wingert, T. L.

    1983-11-01

    ARCO Solar's experiences as a participant in an industry-utility-government environmental qualification team examining photovoltaic devices are discussed. Included is an assessment of the applicability, completeness and appropriateness of the testing procedures and of the acceptance criteria for megawatt-sized procurements for utilities. Like the stand-alone users, the utility industry is interested in obtaining low costs, but additional concerns exist related to reliability and durability, safety, grounding and overall system criteria including performance prediction (related to output power acceptance testing), power quality and dispatchability. For purposes of this first major purchase of photovoltaic modules and panels by the utility industry, there was a carry-over of the JPL specifications. The need exists for futher development, assessement, and selection of qualification and testing standards and evaluation criteria specifically addressing these additional concerns for utility-connected PV power-plant applications.

  18. An Evaluation on Factors Influencing Decision making for Malaysia Disaster Management: The Confirmatory Factor Analysis Approach

    Science.gov (United States)

    Zubir, S. N. A.; Thiruchelvam, S.; Mustapha, K. N. M.; Che Muda, Z.; Ghazali, A.; Hakimie, H.

    2017-12-01

    For the past few years, natural disaster has been the subject of debate in disaster management especially in flood disaster. Each year, natural disaster results in significant loss of life, destruction of homes and public infrastructure, and economic hardship. Hence, an effective and efficient flood disaster management would assure non-futile efforts for life saving. The aim of this article is to examine the relationship between approach, decision maker, influence factor, result, and ethic to decision making for flood disaster management in Malaysia. The key elements of decision making in the disaster management were studied based on the literature. Questionnaire surveys were administered among lead agencies at East Coast of Malaysia in the state of Kelantan and Pahang. A total of 307 valid responses had been obtained for further analysis. Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA) were carried out to analyse the measurement model involved in the study. The CFA for second-order reflective and first-order reflective measurement model indicates that approach, decision maker, influence factor, result, and ethic have a significant and direct effect on decision making during disaster. The results from this study showed that decision- making during disaster is an important element for disaster management to necessitate a successful collaborative decision making. The measurement model is accepted to proceed with further analysis known as Structural Equation Modeling (SEM) and can be assessed for the future research.

  19. Construct Validity of the Korean Dental Licensing Examination using Confirmatory Factor Analysis

    Directory of Open Access Journals (Sweden)

    Mi Kyoung Yim

    2005-06-01

    Full Text Available Confirmatory factor analysis based on a measurement model of a structural equation model was used to test the construct validity of 13 subjects in the Korean Dental Licensing Examination (KDLE. The results of 1,086 examinees who wrote the KDLE in 2004 were analyzed. The thirteen subjects were classified into 62 major categories and 122 intermediate categories. There were 364 items. A hierarchical model was constructed, including major and intermediate categories. The impact of the variables was determined by the standardized regression coefficient that related latent and measured variables in the measurement model. The KDLE showed a high goodness-of-fit with a root mean square error of approximation of 0.030 and a non-normed fit index of 0.998. When the latent variables for the major and intermediate categories were analyzed, the standardized regression coefficients of all of the subjects, with the exception of Health and Medical Legislation, were significant. From the result, we concluded that the 13 subjects showed constructive validity. In addition, the study model and data were very compatible. The subject Health and Medical Legislation had a low explanatory impact with respect to testing the ability of dentists to perform their jobs. This study suggests that similar psychometric studies are needed before integrating or deleting subjects on the KDLE, and to improve item development.

  20. Measuring microbial fitness in a field reciprocal transplant experiment.

    Science.gov (United States)

    Boynton, Primrose J; Stelkens, Rike; Kowallik, Vienna; Greig, Duncan

    2017-05-01

    Microbial fitness is easy to measure in the laboratory, but difficult to measure in the field. Laboratory fitness assays make use of controlled conditions and genetically modified organisms, neither of which are available in the field. Among other applications, fitness assays can help researchers detect adaptation to different habitats or locations. We designed a competitive fitness assay to detect adaptation of Saccharomyces paradoxus isolates to the habitat they were isolated from (oak or larch leaf litter). The assay accurately measures relative fitness by tracking genotype frequency changes in the field using digital droplet PCR (DDPCR). We expected locally adapted S. paradoxus strains to increase in frequency over time when growing on the leaf litter type from which they were isolated. The DDPCR assay successfully detected fitness differences among S. paradoxus strains, but did not find a tendency for strains to be adapted to the habitat they were isolated from. Instead, we found that the natural alleles of the hexose transport gene we used to distinguish S. paradoxus strains had significant effects on fitness. The origin of a strain also affected its fitness: strains isolated from oak litter were generally fitter than strains from larch litter. Our results suggest that dispersal limitation and genetic drift shape S. paradoxus populations in the forest more than local selection does, although further research is needed to confirm this. Tracking genotype frequency changes using DDPCR is a practical and accurate microbial fitness assay for natural environments. © 2016 The Authors. Molecular Ecology Resources Published by John Wiley & Sons Ltd.

  1. Final Report - Independent Confirmatory Survey Summary and Results for the Hematite Decommissioning Project, Festus, Missouri

    International Nuclear Information System (INIS)

    Bailey, E.N.

    2009-01-01

    The objectives of the confirmatory surveys were to provide independent contractor field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the licensee's procedures and survey results.

  2. Dijets in diffractive photoproduction measured with the ZEUS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Renner, R.

    2006-10-15

    The diffractive photoproduction of dijets in electron-proton scattering has been studied using 77.1 pb{sup -1} of data taken with the ZEUS detector at HERA. The measurements have been made at a centre-of- mass energy {radical}s=318 GeV in the kinematic range 0.27.5 and 6.5 GeV, respectively, and to be in the pseudorapidity range -1.5<{eta}<1.5. Differential cross sections have been measured and been confronted with the predictions from leading order Monte Carlo simulations and next-to-leading order QCD calculations. (orig.)

  3. Superconducting gravity gradiometer for sensitive gravity measurements. II. Experiment

    International Nuclear Information System (INIS)

    Chan, H.A.; Moody, M.V.; Paik, H.J.

    1987-01-01

    A sensitive superconducting gravity gradiometer has been constructed and tested. Coupling to gravity signals is obtained by having two superconducting proof masses modulate magnetic fields produced by persistent currents. The induced electrical currents are differenced by a passive superconducting circuit coupled to a superconducting quantum interference device. The experimental behavior of this device has been shown to follow the theoretical model closely in both signal transfer and noise characteristics. While its intrinsic noise level is shown to be 0.07 E Hz/sup -1/2/ (1 Eequivalent10/sup -9/ sec/sup -2/), the actual performance of the gravity gradiometer on a passive platform has been limited to 0.3--0.7 E Hz/sup -1/2/ due to its coupling to the environmental noise. The detailed structure of this excess noise is understood in terms of an analytical error model of the instrument. The calibration of the gradiometer has been obtained by two independent methods: by applying a linear acceleration and a gravity signal in two different operational modes of the instrument. This device has been successfully operated as a detector in a new null experiment for the gravitational inverse-square law. In this paper we report the design, fabrication, and detailed test results of the superconducting gravity gradiometer. We also present additional theoretical analyses which predict the specific dynamic behavior of the gradiometer and of the test

  4. Idaho field experiment 1981. Volume 2: measurement data

    Energy Technology Data Exchange (ETDEWEB)

    Start, G E; Sagendorf, J F; Ackermann, G R; Cate, J H; Hukari, N F; Dickson, C R

    1984-04-01

    The 1981 Idaho Field Experiment was conducted in southeastern Idaho over the upper Snake River Plain. Nine test-day case studies were conducted between July 15 and 30, 1981. Releases of SF/sub 6/ gaseous tracer were made for 8-hour periods from 46m above ground. Tracer was sampled hourly, for 12 sequential hours, at about 100 locations within an area 24km square. Also, a single total integrated sample of about 30 hours duration was collected at approximately 100 sites within an area 48 by 72km square (using 6km spacings). Extensive tower profiles of meteorology at the release point were collected. RAWINSONDES, RABALS and PIBALS were collected at 3 to 5 sites. Horizontal, low-altitude winds were monitored using the INEL MESONET. SF/sub 6/ tracer plume releases were marked with co-located oil fog releases and bi-hourly sequential launches of tetroon pairs. Aerial LIDAR observations of the oil fog plume and airborne samples of SF/sub 6/ were collected. High altitude aerial photographs of daytime plumes were collected. Volume II lists the data in tabular form or cites the special supplemental reports by other participating contractors. While the primary user file and the data archive are maintained on 9 track/1600 cpi magnetic tapes, listings of the individual values are provided for the user who either cannot utilize the tapes or wishes to preview the data. The accuracies and quality of these data are described.

  5. Can Confirmatory Biopsy be Omitted in Patients with Prostate Cancer Favorable Diagnostic Features on Active Surveillance?

    Science.gov (United States)

    Satasivam, Prassannah; Poon, Bing Ying; Ehdaie, Behfar; Vickers, Andrew J; Eastham, James A

    2016-01-01

    We evaluated whether initial diagnostic parameters could predict the confirmatory biopsy result in patients initiating active surveillance for prostate cancer, to determine whether some men at low risk for disease reclassification could be spared unnecessary biopsy. The cohort included 392 men with Gleason 6 prostate cancer on initial biopsy undergoing confirmatory biopsy. We used univariate and multivariable logistic regression to assess if high grade cancer (Gleason 7 or greater) on confirmatory biopsy could be predicted from initial diagnostic parameters (prostate specific antigen density, magnetic resonance imaging result, percent positive cores, percent cancer in positive cores and total tumor length). Median patient age was 62 years (IQR 56-66) and 47% of patients had a dominant or focal lesion on magnetic resonance imaging. Of the 392 patients 44 (11%) had high grade cancer on confirmatory biopsy, of whom 39 had Gleason 3+4, 1 had 4+3, 3 had Gleason 8 and 1 had Gleason 9 disease. All predictors were significantly associated with high grade cancer at confirmatory biopsy on univariate analysis. However, in the multivariable model only prostate specific antigen density and total tumor length were significantly associated (AUC 0.85). Using this model to select patients for confirmatory biopsy would generally provide a higher net benefit than performing confirmatory biopsy in all patients, across a wide range of threshold probabilities. If externally validated, a model based on initial diagnostic criteria could be used to avoid confirmatory biopsy in many patients initiating active surveillance. Copyright © 2016 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  6. Can Confirmatory Biopsy be Omitted in Prostate Cancer Active Surveillance Patients with Favorable Diagnostic Features?

    Science.gov (United States)

    Satasivam, Prassannah; Poon, Bing Ying; Ehdaie, Behfar; Vickers, Andrew J.; Eastham, James A.

    2016-01-01

    Purpose We evaluated whether initial diagnostic parameters could predict the confirmatory biopsy result in patients initiating active surveillance for prostate cancer, to determine whether some men at low risk of reclassification could be spared unnecessary biopsy. Materials and Methods The cohort included 392 men with Gleason 6 prostate cancer on initial biopsy undergoing confirmatory biopsy. We used univariate and multivariable logistic regression to assess if high-grade cancer (Gleason ≥ 7) on confirmatory biopsy could be predicted from initial diagnostic parameters (prostate-specific antigen density, magnetic resonance imaging result, percent positive cores, percent cancer in positive cores, and total tumor length). Results Median age was 62 years (IQR 56–66) and 47% of patients were found to have a dominant or focal lesion on magnetic resonance imaging. Of the 392 patients, 44 (11%) were found to have high-grade cancer on confirmatory biopsy, among whom 39 had 3+4, 1 had 4+3, 3 had Gleason 8, and 1 patient had Gleason 9 disease. All predictors were significantly associated with high-grade cancer at confirmatory biopsy on univariate analysis. However, in the multivariable model only prostate-specific antigen density and total tumor length were significantly associated (AUC of 0.85). Using this model to select patients for confirmatory biopsy would generally provide a higher net benefit than performing confirmatory biopsy in all patients, across a wide range of threshold probabilities. Conclusion If externally validated, a model based on initial diagnostic criteria could be used to avoid confirmatory biopsy in many patients initiating active surveillance. PMID:26192258

  7. Design and interpretation of experiments to measure the effective removal section.

    CERN Document Server

    Desdin, L

    2001-01-01

    Paper is devoted to develop a single analytical instrument to design and interpret experiment to measure the neutron removal cross sections. There were analyzed the influence of the geometrical and nuclear parameters into the neutron removal cross sections values measured

  8. When Seeing Isn't Believing: How Math Can Guide Our Interpretation of Measurements and Experiments.

    Science.gov (United States)

    Macklin, Paul

    2017-08-23

    Mathematical thought experiments probe the meaning and pitfalls of experimental measurements and demonstrate that caution is in order when measuring heterogeneity. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Recent results from the ICARUS experiment - Measurements concerning neutrino velocity

    International Nuclear Information System (INIS)

    Cieslik, K.

    2014-01-01

    The ICARUS T600 detector at the LNGS Gran Sasso underground Laboratory is the first large mass Liquid Argon Time Projection Chamber (LAr-TPC) designed to study the ν μ → ν τ oscillation for neutrinos from the CERN-CNGS beam, the atmospheric neutrinos and matter stability. In stable conditions the detector has been collecting data since October 2010. The results, presented here, of the search for analogue to the Cherenkov radiation at superluminal speeds and the measurement of the neutrino time of flight are incompatible with the OPERA collaboration claiming that CNGS muon neutrinos arrive to Gran Sasso, after covering a distance of about 732 km, earlier than expected from the luminal speed. (author)

  10. Luminosity measurements for the R scan experiment at BESIII

    Science.gov (United States)

    Ablikim, M.; Achasov, M. N.; Ahmed, S.; Ai, X. C.; Albayrak, O.; Albrecht, M.; Ambrose, D. J.; Amoroso, A.; An, F. F.; An, Q.; Bai, J. Z.; Bakina, O.; Baldini Ferroli, R.; Ban, Y.; Bennett, D. W.; Bennett, J. V.; Berger, N.; Bertani, M.; Bettoni, D.; Bian, J. M.; Bianchi, F.; Boger, E.; Boyko, I.; Briere, R. A.; Cai, H.; Cai, X.; Cakir, O.; Calcaterra, A.; Cao, G. F.; Cetin, S. A.; Chai, J.; Chang, J. F.; Chelkov, G.; Chen, G.; Chen, H. S.; Chen, J. C.; Chen, M. L.; Chen, S.; Chen, S. J.; Chen, X.; Chen, X. R.; Chen, Y. B.; Chu, X. K.; Cibinetto, G.; Dai, H. L.; Dai, J. P.; Dbeyssi, A.; Dedovich, D.; Deng, Z. Y.; Denig, A.; Denysenko, I.; Destefanis, M.; De Mori, F.; Ding, Y.; Dong, C.; Dong, J.; Dong, L. Y.; Dong, M. Y.; Dou, Z. L.; Du, S. X.; Duan, P. F.; Fan, J. Z.; Fang, J.; Fang, S. S.; Fang, X.; Fang, Y.; Farinelli, R.; Fava, L.; Feldbauer, F.; Felici, G.; Feng, C. Q.; Fioravanti, E.; Fritsch, M.; Fu, C. D.; Gao, Q.; Gao, X. L.; Gao, Y.; Gao, Z.; Garzia, I.; Goetzen, K.; Gong, L.; Gong, W. X.; Gradl, W.; Greco, M.; Gu, M. H.; Gu, Y. T.; Guan, Y. H.; Guo, A. Q.; Guo, L. B.; Guo, R. P.; Guo, Y.; Guo, Y. P.; Haddadi, Z.; Hafner, A.; Han, S.; Hao, X. Q.; Harris, F. A.; He, K. L.; Heinsius, F. H.; Held, T.; Heng, Y. K.; Holtmann, T.; Hou, Z. L.; Hu, C.; Hu, H. M.; Hu, J. F.; Hu, T.; Hu, Y.; Huang, G. S.; Huang, J. S.; Huang, X. T.; Huang, X. Z.; Huang, Z. L.; Hussain, T.; Ikegami Andersson, W.; Ji, Q.; Ji, Q. P.; Ji, X. B.; Ji, X. L.; Jiang, L. W.; Jiang, X. S.; Jiang, X. Y.; Jiao, J. B.; Jiao, Z.; Jin, D. P.; Jin, S.; Johansson, T.; Julin, A.; Kalantar-Nayestanaki, N.; Kang, X. L.; Kang, X. S.; Kavatsyuk, M.; Ke, B. C.; Kiese, P.; Kliemt, R.; Kloss, B.; Kolcu, O. B.; Kopf, B.; Kornicer, M.; Kupsc, A.; Kühn, W.; Lange, J. S.; Lara, M.; Larin, P.; Leithoff, H.; Leng, C.; Li, C.; Li, Cheng; Li, D. M.; Li, F.; Li, F. Y.; Li, G.; Li, H. B.; Li, H. J.; Li, J. C.; Li, Jin; Li, K.; Li, K.; Li, Lei; Li, P. R.; Li, Q. Y.; Li, T.; Li, W. D.; Li, W. G.; Li, X. L.; Li, X. N.; Li, X. Q.; Li, Y. B.; Li, Z. B.; Liang, H.; Liang, Y. F.; Liang, Y. T.; Liao, G. R.; Lin, D. X.; Liu, B.; Liu, B. J.; Liu, C. X.; Liu, D.; Liu, F. H.; Liu, Fang; Liu, Feng; Liu, H. B.; Liu, H. H.; Liu, H. H.; Liu, H. M.; Liu, J.; Liu, J. B.; Liu, J. P.; Liu, J. Y.; Liu, K.; Liu, K. Y.; Liu, L. D.; Liu, P. L.; Liu, Q.; Liu, S. B.; Liu, X.; Liu, Y. B.; Liu, Y. Y.; Liu, Z. A.; Liu, Zhiqing; Loehner, H.; Lou, X. C.; Lu, H. J.; Lu, J. G.; Lu, Y.; Lu, Y. P.; Luo, C. L.; Luo, M. X.; Luo, T.; Luo, X. L.; Lyu, X. R.; Ma, F. C.; Ma, H. L.; Ma, L. L.; Ma, M. M.; Ma, Q. M.; Ma, T.; Ma, X. N.; Ma, X. Y.; Ma, Y. M.; Maas, F. E.; Maggiora, M.; Malik, Q. A.; Mao, Y. J.; Mao, Z. P.; Marcello, S.; Messchendorp, J. G.; Mezzadri, G.; Min, J.; Min, T. J.; Mitchell, R. E.; Mo, X. H.; Mo, Y. J.; Morales Morales, C.; Muchnoi, N. Yu.; Muramatsu, H.; Musiol, P.; Nefedov, Y.; Nerling, F.; Nikolaev, I. B.; Ning, Z.; Nisar, S.; Niu, S. L.; Niu, X. Y.; Olsen, S. L.; Ouyang, Q.; Pacetti, S.; Pan, Y.; Patteri, P.; Pelizaeus, M.; Peng, H. P.; Peters, K.; Pettersson, J.; Ping, J. L.; Ping, R. G.; Poling, R.; Prasad, V.; Qi, H. R.; Qi, M.; Qian, S.; Qiao, C. F.; Qin, L. Q.; Qin, N.; Qin, X. S.; Qin, Z. H.; Qiu, J. F.; Rashid, K. H.; Redmer, C. F.; Ripka, M.; Rong, G.; Rosner, Ch.; Ruan, X. D.; Sarantsev, A.; Savrié, M.; Schnier, C.; Schoenning, K.; Shan, W.; Shao, M.; Shen, C. P.; Shen, P. X.; Shen, X. Y.; Sheng, H. Y.; Song, W. M.; Song, X. Y.; Sosio, S.; Spataro, S.; Sun, G. X.; Sun, J. F.; Sun, S. S.; Sun, X. H.; Sun, Y. J.; Sun, Y. Z.; Sun, Z. J.; Sun, Z. T.; Tang, C. J.; Tang, X.; Tapan, I.; Thorndike, E. H.; Tiemens, M.; Uman, I.; Varner, G. S.; Wang, B.; Wang, B. L.; Wang, D.; Wang, D. Y.; Wang, K.; Wang, L. L.; Wang, L. S.; Wang, M.; Wang, P.; Wang, P. L.; Wang, W.; Wang, W. P.; Wang, X. F.; Wang, Y.; Wang, Y. D.; Wang, Y. F.; Wang, Y. Q.; Wang, Z.; Wang, Z. G.; Wang, Z. H.; Wang, Z. Y.; Wang, Z. Y.; Weber, T.; Wei, D. H.; Weidenkaff, P.; Wen, S. P.; Wiedner, U.; Wolke, M.; Wu, L. H.; Wu, L. J.; Wu, Z.; Xia, L.; Xia, L. G.; Xia, Y.; Xiao, D.; Xiao, H.; Xiao, Z. J.; Xie, Y. G.; Xie, Y. H.; Xiu, Q. L.; Xu, G. F.; Xu, J. J.; Xu, L.; Xu, Q. J.; Xu, Q. N.; Xu, X. P.; Yan, L.; Yan, W. B.; Yan, W. C.; Yan, Y. H.; Yang, H. J.; Yang, H. X.; Yang, L.; Yang, Y. X.; Ye, M.; Ye, M. H.; Yin, J. H.; You, Z. Y.; Yu, B. X.; Yu, C. X.; Yu, J. S.; Yuan, C. Z.; Yuan, Y.; Yuncu, A.; Zafar, A. A.; Zeng, Y.; Zeng, Z.; Zhang, B. X.; Zhang, B. Y.; Zhang, C. C.; Zhang, D. H.; Zhang, H. H.; Zhang, H. Y.; Zhang, J.; Zhang, J. J.; Zhang, J. L.; Zhang, J. Q.; Zhang, J. W.; Zhang, J. Y.; Zhang, J. Z.; Zhang, K.; Zhang, L.; Zhang, S. Q.; Zhang, X. Y.; Zhang, Y.; Zhang, Y.; Zhang, Y. H.; Zhang, Y. N.; Zhang, Y. T.; Zhang, Yu; Zhang, Z. H.; Zhang, Z. P.; Zhang, Z. Y.; Zhao, G.; Zhao, J. W.; Zhao, J. Y.; Zhao, J. Z.; Zhao, Lei; Zhao, Ling; Zhao, M. G.; Zhao, Q.; Zhao, Q. W.; Zhao, S. J.; Zhao, T. C.; Zhao, Y. B.; Zhao, Z. G.; Zhemchugov, A.; Zheng, B.; Zheng, J. P.; Zheng, W. J.; Zheng, Y. H.; Zhong, B.; Zhou, L.; Zhou, X.; Zhou, X. K.; Zhou, X. R.; Zhou, X. Y.; Zhu, K.; Zhu, K. J.; Zhu, S.; Zhu, S. H.; Zhu, X. L.; Zhu, Y. C.; Zhu, Y. S.; Zhu, Z. A.; Zhuang, J.; Zotti, L.; Zou, B. S.; Zou, J. H.; BESIII Collaboration

    2017-06-01

    By analyzing the large-angle Bhabha scattering events e+e- → (γ)e+e- and diphoton events e+e- → (γ)γγ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are important inputs for the R value and J/ψ resonance parameter measurements. Supported by National Key Basic Research Program of China (2015CB856700), National Natural Science Foundation of China (NSFC) (10935007, 11121092, 11125525, 11235011, 11322544, 11335008, 11375170, 11275189, 11079030, 11475164, 11475169, 11005109, 10979095, 11275211), Chinese Academy of Sciences (CAS) Large-Scale Scientific Facility Program; Joint Large-Scale Scientific Facility Funds of the NSFC and CAS (11179007, U1232201, U1332201, U1532102). (KJCX2-YW-N29, KJCX2-YW-N45). 100 Talents Program of CAS, INPAC and Shanghai Key Laboratory for Particle Physics and Cosmology, German Research Foundation DFG (Collaborative Research Center CRC-1044), Istituto Nazionale di Fisica Nucleare, Italy, Ministry of Development of Turkey (DPT2006K-120470), Russian Foundation for Basic Research (14-07-91152), U. S. Department of Energy (DE-FG02-04ER41291, DE-FG02-05ER41374, DE-FG02-94ER40823, DESC0010118), U.S. National Science Foundation, University of Groningen (RuG) and the Helmholtzzentrum fuer Schwerionenforschung GmbH (GSI), Darmstadt, WCU Program of National Research Foundation of Korea (R32-2008-000-10155-0)

  11. Psychometric Properties of the Heart Disease Knowledge Scale: Evidence from Item and Confirmatory Factor Analyses.

    Science.gov (United States)

    Lim, Bee Chiu; Kueh, Yee Cheng; Arifin, Wan Nor; Ng, Kok Huan

    2016-07-01

    Heart disease knowledge is an important concept for health education, yet there is lack of evidence on proper validated instruments used to measure levels of heart disease knowledge in the Malaysian context. A cross-sectional, survey design was conducted to examine the psychometric properties of the adapted English version of the Heart Disease Knowledge Questionnaire (HDKQ). Using proportionate cluster sampling, 788 undergraduate students at Universiti Sains Malaysia, Malaysia, were recruited and completed the HDKQ. Item analysis and confirmatory factor analysis (CFA) were used for the psychometric evaluation. Construct validity of the measurement model was included. Most of the students were Malay (48%), female (71%), and from the field of science (51%). An acceptable range was obtained with respect to both the difficulty and discrimination indices in the item analysis results. The difficulty index ranged from 0.12-0.91 and a discrimination index of ≥ 0.20 were reported for the final retained 23 items. The final CFA model showed an adequate fit to the data, yielding a 23-item, one-factor model [weighted least squares mean and variance adjusted scaled chi-square difference = 1.22, degrees of freedom = 2, P-value = 0.544, the root mean square error of approximation = 0.03 (90% confidence interval = 0.03, 0.04); close-fit P-value = > 0.950]. Adequate psychometric values were obtained for Malaysian undergraduate university students using the 23-item, one-factor model of the adapted HDKQ.

  12. Confirmatory factor analysis of the Sport Emotion Questionnaire in organisational environments.

    Science.gov (United States)

    Arnold, Rachel; Fletcher, David

    2015-01-01

    The Sport Emotion Questionnaire (SEQ) (Jones, M. V., Lane, A. M., Bray, S. R., Uphill, M., & Catlin, J. (2005). Development and validation of the SEQ. Journal of Sport and Exercise Psychology, 27, 407-431) was developed and initially validated to assess sport performers' pre-competitive emotions. The purpose of this study was to test the factor structure of the SEQ in a different environment (viz. organisational) and at a different time point (viz. the past month). A further aim was to examine if the SEQ was invariant across different groups of sport performers. A diverse sample of athletes (n = 1277) completed the questionnaire. Fit indices from confirmatory factor analyses provided partial support for the hypothesised measurement model, with equal or better fit demonstrated than evident in initial validation. The comparative fit index values were above acceptable guidelines for all factors at subscale level. Evidence was also found for the invariance of the SEQ across different groups. Overall, the findings support the reliability and validity of the SEQ as a measure of the emotions experienced by sport performers in an organisational environment during the past month.

  13. Measuring and processing measured data in the MAW and HTR fuel element storage experiment. Pt. 2

    International Nuclear Information System (INIS)

    Henze, R.

    1987-01-01

    The central data collection plant for the MAW experimental storage in the Asse salt mine consists of 3 components: a) Front end computers assigned to the experiment for data collection, with few and simple components for the difficult ambient conditions underground. b) An overground central computer, which carries out the tasks of intermediate data storage, display at site, monitoring of the experiment, alarms and remote data transmission for final evaluation. c) A local network connects the front end computers to the central computer. It should take over network tasks (data transmission reports) from the front end computers and should make a flexible implementation of new experiments possible. (orig./RB) [de

  14. Study of microstrip gas chambers for CMS experiment and measurement of the W boson mass in the DELPHI experiment

    International Nuclear Information System (INIS)

    Ripp-Baudot, I.

    2004-06-01

    In this document the author describes 3 fields of his research activities: first, the development and validation tests of micro-strip gas chambers for the CMS experiment; secondly, the measurements of the W boson mass and width by analysing the events: e + e - → W + W - → qq-bar qq-bar whose data have been collected in the DELPHI experiment (at the LEP-2 accelerator); and thirdly, the tagging of b-jets that is an essential tool for the study of the top quark. The last chapter is dedicated to what is expected from LHC experiments concerning the properties of the quark top: mass, spin, production and decay channels

  15. A Simple Experiment To Measure the Content of Oxygen in the Air Using Heated Steel Wool

    Science.gov (United States)

    Vera, Francisco; Rivera, Rodrigo; Nunez, Cesar

    2011-01-01

    The typical experiment to measure the oxygen content in the atmosphere uses the rusting of steel wool inside a closed volume of air. Two key aspects of this experiment that make possible a successful measurement of the content of oxygen in the air are the use of a closed atmosphere and the use of a chemical reaction that involves the oxidation of…

  16. A Confirmatory Factor Analysis of the Student Evidence-Based Practice Questionnaire (S-EBPQ) in an Australian sample.

    Science.gov (United States)

    Beccaria, Lisa; Beccaria, Gavin; McCosker, Catherine

    2018-03-01

    It is crucial that nursing students develop skills and confidence in using Evidence-Based Practice principles early in their education. This should be assessed with valid tools however, to date, few measures have been developed and applied to the student population. To examine the structural validity of the Student Evidence-Based Practice Questionnaire (S-EBPQ), with an Australian online nursing student cohort. A cross-sectional study for constructing validity. Three hundred and forty-five undergraduate nursing students from an Australian regional university were recruited across two semesters. Confirmatory Factor Analysis was used to examine the structural validity. Confirmatory Factor Analysis was applied which resulted in a good fitting model, based on a revised 20-item tool. The S-EBPQ tool remains a psychometrically robust measure of evidence-based practice use, attitudes, and knowledge and skills and can be applied in an online Australian student context. The findings of this study provided further evidence of the reliability and four factor structure of the S-EBPQ. Opportunities for further refinement of the tool may result in improvements in structural validity. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. Confirmatory factor analysis of the Infant Feeding Styles Questionnaire in Latino families.

    Science.gov (United States)

    Wood, Charles T; Perreira, Krista M; Perrin, Eliana M; Yin, H Shonna; Rothman, Russell L; Sanders, Lee M; Delamater, Alan M; Bentley, Margaret E; Bronaugh, Andrea B; Thompson, Amanda L

    2016-05-01

    Parent feeding practices affect risk of obesity in children. Latino children are at higher risk of obesity than the general population, yet valid measure of feeding practices, one of which is the Infant Feeding Styles Questionnaire (IFSQ), have not been formally validated in Spanish. To validate the IFSQ among Latino families, we conducted confirmatory factor analysis of pressuring, restrictive, and responsive feeding constructs from the IFSQ. The IFSQ was administered at the 12-month visit in the Greenlight study, a multi-center cluster randomized trial to prevent obesity. Parents were included if they were of Latino origin (n = 303) and completed an English or Spanish language modified IFSQ (without the indulgence construct). Scores from nine sub-constructs of the IFSQ were compared between English and Spanish language versions. We tested reliability with Cronbach's alpha coefficients and performed confirmatory factor analysis to examine factor loadings and goodness of fit characteristics, modifying constructs to achieve best fit. Of 303 parents completing the IFSQ, 84% were born outside the US, and 74% completed the IFSQ in Spanish. Reliability coefficients ranged from 0.28 to 0.61 for the laissez-faire sub-constructs and from 0.58 to 0.83 for the pressuring, restrictive, and responsive sub-constructs. Results for all coefficients were similar between participants responding to an English and Spanish version of the IFSQ. Goodness of fit indices ranged from CFI 0.82-1 and RMSEA 0.00-0.31, and the model performed best in pressuring-soothing (CFI 1.0, RMSEA 0.00) and restrictive-amount (CFI 0.98, RMSEA 0.1) sub-constructs. In a sample of Latino families, pressuring, restrictive, and responsive constructs performed well. The modified IFSQ in both English and Spanish-speaking Latino families may be used to assess parenting behaviors related to early obesity risk in this at-risk population. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Assessing an organizational culture instrument based on the Competing Values Framework: Exploratory and confirmatory factor analyses

    Science.gov (United States)

    Helfrich, Christian D; Li, Yu-Fang; Mohr, David C; Meterko, Mark; Sales, Anne E

    2007-01-01

    Background The Competing Values Framework (CVF) has been widely used in health services research to assess organizational culture as a predictor of quality improvement implementation, employee and patient satisfaction, and team functioning, among other outcomes. CVF instruments generally are presented as well-validated with reliable aggregated subscales. However, only one study in the health sector has been conducted for the express purpose of validation, and that study population was limited to hospital managers from a single geographic locale. Methods We used exploratory and confirmatory factor analyses to examine the underlying structure of data from a CVF instrument. We analyzed cross-sectional data from a work environment survey conducted in the Veterans Health Administration (VHA). The study population comprised all staff in non-supervisory positions. The survey included 14 items adapted from a popular CVF instrument, which measures organizational culture according to four subscales: hierarchical, entrepreneurial, team, and rational. Results Data from 71,776 non-supervisory employees (approximate response rate 51%) from 168 VHA facilities were used in this analysis. Internal consistency of the subscales was moderate to strong (α = 0.68 to 0.85). However, the entrepreneurial, team, and rational subscales had higher correlations across subscales than within, indicating poor divergent properties. Exploratory factor analysis revealed two factors, comprising the ten items from the entrepreneurial, team, and rational subscales loading on the first factor, and two items from the hierarchical subscale loading on the second factor, along with one item from the rational subscale that cross-loaded on both factors. Results from confirmatory factor analysis suggested that the two-subscale solution provides a more parsimonious fit to the data as compared to the original four-subscale model. Conclusion This study suggests that there may be problems applying conventional

  19. A Confirmatory Factor Analysis of the Smoking and Weight Eating Episodes Test (SWEET).

    Science.gov (United States)

    Farris, Samantha G; DiBello, Angelo M; Bloom, Erika Litvin; Abrantes, Ana M

    2018-03-20

    The Smoking and Weight Eating Episodes Test (SWEET; Adams et al. 2011) is a self-report measure designed to assess multiple reasons why and when smokers use cigarettes for appetite, weight, and shape management, that was initially developed and validated in young female smokers. The aim of the current study was to evaluate the factor structure and psychometric properties of the SWEET measure among both male and female daily cigarette smokers. Participants (n = 577; M age  = 44.42; SD = 13.80; 52.7% female) were daily smokers recruited through Qualtrics Online Sample for an anonymous study on smoking and health. On average, participants reported smoking for 25.7 years (SD = 14.35), smoked 17.0 cigarettes per day (SD = 8.38), and had moderate levels of tobacco dependence. Confirmatory factor analyses supported the initial factor structure found in the original SWEET measure suggesting a four-factor structure fit the data well, but not a one-factor structure. Factors included using cigarettes for appetite suppression, using cigarettes to prevent overeating, smoking to cope with body dissatisfaction, and using cigarettes to cope with appetite-related withdrawal symptoms. Tests of measurement invariance revealed no significant differences when evaluating SWEET scores by participant sex. The SWEET factor scores evidenced internal consistency, known groups validity, convergent validity with related constructs (compensatory eating behaviors, tobacco dependence) and cessation-relevant variables (smoking abstinence expectancies, prior withdrawal symptoms), and discriminant validity with physical activity and sedentary behavior. The present study provides evidence in support of the validity and reliability of scores on the SWEET as a multidimensional measure of smoking for appetite, weight, and body-related concerns in male and female daily cigarette smokers.

  20. Human Resources Management Policies and Practices Scale (HRMPPS: Exploratory and Confirmatory Factor Analysis

    Directory of Open Access Journals (Sweden)

    Gisela Demo

    2012-10-01

    Full Text Available Given the strategic relevance of Human Resources Management (HRM in organizations and the lack of scientific instruments to measure employees’ perceptions about policies and practices of HRM, this study aimed to validate the Human Resources Management Policies and Practices Scale (HRMPPS through exploratory and confirmatory factor analysis using the maximum likelihood method. The study has a quantitative design, but also included qualitative analysis required for the development of a scale. Employees from various organizations composed a sample of 632 people. Scale reliability was assessed by Cronbach’s alpha and Jöreskog’s rho. A sixfactor model was generated showing high-reliability and good fit. Construct validity was provided through convergent and discriminant analyses. The factors were consistent with the literature review and explained about 58% of the construct’s total variance. This study contributes to the scientific production in the area of Human Resources Management since HRMPPS can be used not only in relational studies but also as an evaluation instrument by managers who wish to improve their employees’ well-being as well as organizational outcomes.

  1. Seizure Self-Efficacy Scale for Children with Epilepsy: Confirmatory and Exploratory Factor Analysis

    Directory of Open Access Journals (Sweden)

    Şerife Tutar Güven

    2017-12-01

    Full Text Available Aim: In the past few years, the concept of self-efficacy in children with epilepsy has become increasingly important. This study aimed to analyze the psychometric aspects of the Turkish version of the Seizure Self-Efficacy Scale for Children. Materials and Methods: This is a cross-sectional survey. The study data were collected using the Seizure Self-Efficacy Scale for Children and Child Introduction Form. The study sample included 166 children who were between 9 and 17 years of age. The authors assessed the reliability and construct validity of the study data using exploratory and confirmatory factor analyses (CFA. Results: The original model was not confirmed by the CFA. The analysis tool included 15 items in two factors. Reliability analysis showed that the two factors were acceptable and valid. The tool was valid and reliable for measuring the self-efficacy of epileptic children. The factor structure was derived from and confirmed by the original tool. It was found that the Turkish version of the modified Seizure Self-Efficacy Scale for Children had excellent satisfactory psychometric aspects for a Turkish population. Conclusion: Health professionals can present a more effective drug process and nursing care by identifying and assessing seizure self-efficacy levels in children with epilepsy, and they can make a positive contribution to disease management and the way the child deals with the disease.

  2. The Nursing Performance Instrument: Exploratory and Confirmatory Factor Analyses in Registered Nurses.

    Science.gov (United States)

    Sagherian, Knar; Steege, Linsey M; Geiger-Brown, Jeanne; Harrington, Donna

    2018-04-01

    The optimal performance of nurses in healthcare settings plays a critical role in care quality and patient safety. Despite this importance, few measures are provided in the literature that evaluate nursing performance as an independent construct from competencies. The nine-item Nursing Performance Instrument (NPI) was developed to fill this gap. The aim of this study was to examine and confirm the underlying factor structure of the NPI in registered nurses. The design was cross-sectional, using secondary data collected between February 2008 and April 2009 for the "Fatigue in Nursing Survey" (N = 797). The sample was predominantly dayshift female nurses working in acute care settings. Using Mplus software, exploratory and confirmatory factor analyses were applied to the NPI data, which were divided into two equal subsamples. Multiple fit indices were used to evaluate the fit of the alternative models. The three-factor model was determined to fit the data adequately. The factors that were labeled as "physical/mental decrements," "consistent practice," and "behavioral change" were moderately to strongly intercorrelated, indicating good convergent validity. The reliability coefficients for the subscales were acceptable. The NPI consists of three latent constructs. This instrument has the potentialto be used as a self-monitoring instrument that addressesnurses' perceptions of performance while providing patient care.

  3. Analyzing Mathematics Beliefs of Pre-Service Teachers Using Confirmatory Factor Analysis

    Directory of Open Access Journals (Sweden)

    Mazlini Adnan

    2011-12-01

    Full Text Available Mathematics beliefs play an important role in enhancing the quality and the effectiveness of teaching and learning. This study analyzes the mathematics beliefs of 317 pre-service teachers from six Higher Education Institutions (HEIs (Government Public Universities who were randomly selected to participate in this study. Questionnaires consisting of twenty three items were given to the respondents during the data collection process. The validation of the items was done by using confirmatory factor analysis (CFA. In order to obtain a model fit for the measurement model of mathematics beliefs, several fit index tests such as CMINDF, GFI, AGFI, IFI, NFI, CFI, TLI and RMSEA were used. Constructivist beliefs and traditional beliefs were identified as the contributing factors in the model. The analysis also revealed that mathematics beliefs consist of structures of two hidden variables. The correlation between the two variables (constructivist beliefs and traditional beliefs is at a moderate level. Hence, pre-service teachers should be able to recognize their type of mathematics beliefs in order to become effective mathematics teachers.

  4. Survey of Thermal-Fluids Evaluation and Confirmatory Experimental Validation Requirements of Accident Tolerant Cladding Concepts with Focus on Boiling Heat Transfer Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Nicholas R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wysocki, Aaron J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ali, Amir [Univ. of New Mexico, Albuquerque, NM (United States); Liu, Maolong [Univ. of New Mexico, Albuquerque, NM (United States); Blandford, Edward [Univ. of New Mexico, Albuquerque, NM (United States)

    2016-06-01

    The U.S. Department of Energy Office of Nuclear Energy (DOE-NE) Advanced Fuels Campaign (AFC) is working closely with the nuclear industry to develop fuel and cladding candidates with potentially enhanced accident tolerance, also known as accident tolerant fuel (ATF). Thermal-fluids characteristics are a vital element of a holistic engineering evaluation of ATF concepts. One vital characteristic related to boiling heat transfer is the critical heat flux (CHF). CHF plays a vital role in determining safety margins during normal operation and also in the progression of potential transient or accident scenarios. This deliverable is a scoping survey of thermal-fluids evaluation and confirmatory experimental validation requirements of accident tolerant cladding concepts with a focus on boiling heat transfer characteristics. The key takeaway messages of this report are: 1. CHF prediction accuracy is important and the correlations may have significant uncertainty. 2. Surface conditions are important factors for CHF, primarily the wettability that is characterized by contact angle. Smaller contact angle indicates greater wettability, which increases the CHF. Surface roughness also impacts wettability. Results in the literature for pool boiling experiments indicate changes in CHF by up to 60% for several ATF cladding candidates. 3. The measured wettability of FeCrAl (i.e., contact angle and roughness) indicates that CHF should be investigated further through pool boiling and flow boiling experiments. 4. Initial measurements of static advancing contact angle and surface roughness indicate that FeCrAl is expected to have a higher CHF than Zircaloy. The measured contact angle of different FeCrAl alloy samples depends on oxide layer thickness and composition. The static advancing contact angle tends to decrease as the oxide layer thickness increases.

  5. Patient experience and satisfaction with inpatient service: development of short form survey instrument measuring the core aspect of inpatient experience.

    Directory of Open Access Journals (Sweden)

    Eliza L Y Wong

    Full Text Available Patient experience reflects quality of care from the patients' perspective; therefore, patients' experiences are important data in the evaluation of the quality of health services. The development of an abbreviated, reliable and valid instrument for measuring inpatients' experience would reflect the key aspect of inpatient care from patients' perspective as well as facilitate quality improvement by cultivating patient engagement and allow the trends in patient satisfaction and experience to be measured regularly. The study developed a short-form inpatient instrument and tested its ability to capture a core set of inpatients' experiences. The Hong Kong Inpatient Experience Questionnaire (HKIEQ was established in 2010; it is an adaptation of the General Inpatient Questionnaire of the Care Quality Commission created by the Picker Institute in United Kingdom. This study used a consensus conference and a cross-sectional validation survey to create and validate a short-form of the Hong Kong Inpatient Experience Questionnaire (SF-HKIEQ. The short-form, the SF-HKIEQ, consisted of 18 items derived from the HKIEQ. The 18 items mainly covered relational aspects of care under four dimensions of the patient's journey: hospital staff, patient care and treatment, information on leaving the hospital, and overall impression. The SF-HKIEQ had a high degree of face validity, construct validity and internal reliability. The validated SF-HKIEQ reflects the relevant core aspects of inpatients' experience in a hospital setting. It provides a quick reference tool for quality improvement purposes and a platform that allows both healthcare staff and patients to monitor the quality of hospital care over time.

  6. Revised-Confirmatory Survey Report for Portions of the Auxiliary Building Structural Surfaces and Turbine Building Embedded Piping, Rancho Seco Nuclear Generating Station, Herald, California

    International Nuclear Information System (INIS)

    W. C. Adams

    2007-01-01

    During the period of October 15 and 18, 2007, ORISE performed confirmatory radiological survey activities which included beta and gamma structural surface scans and beta activity direct measurements within the Auxiliary Building, beta or gamma scans within Turbine Building embedded piping, beta activity determinations within Turbine Building Drain 3-1-27, and gamma scans and the collection of a soil sample from the clay soils adjacent to the Lower Mixing Box

  7. Weighing up the weighted case mix tool (WCMT): a psychometric investigation using confirmatory factor analysis.

    Science.gov (United States)

    Duane, B G; Humphris, G; Richards, D; Okeefe, E J; Gordon, K; Freeman, R

    2014-12-01

    To assess the use of the WCMT in two Scottish health boards and to consider the impact of simplifying the tool to improve efficient use. A retrospective analysis of routine WCMT data (47,276 cases). Public Dental Service (PDS) within NHS Lothian and Highland. The WCMT consists of six criteria. Each criterion is measured independently on a four-point scale to assess patient complexity and the dental care for the disabled/impaired patient. Psychometric analyses on the data-set were conducted. Conventional internal consistency coefficients were calculated. Latent variable modelling was performed to assess the 'fit' of the raw data to a pre-specified measurement model. A Confirmatory Factor Analysis (CFA) was used to test three potential changes to the existing WCMT that included, the removal of the oral risk factor question, the removal of original weightings for scoring the Tool, and collapsing the 4-point rating scale to three categories. The removal of the oral risk factor question had little impact on the reliability of the proposed simplified CMT to discriminate between levels of patient complexity. The removal of weighting and collapsing each item's rating scale to three categories had limited impact on reliability of the revised tool. The CFA analysis provided strong evidence that a new, proposed simplified Case Mix Tool (sCMT) would operate closely to the pre-specified measurement model (the WMCT). A modified sCMT can demonstrate, without reducing reliability, a useful measure of the complexity of patient care. The proposed sCMT may be implemented within primary care dentistry to record patient complexity as part of an oral health assessment.

  8. Analisis Hubungan antara Berbagai Model Gabungan Proksi Investment Opportunity Set dan Real Growth dengan Menggunakan Pendekatan Confirmatory Factor Analysis”

    Directory of Open Access Journals (Sweden)

    Muhammad Yusuf

    2016-02-01

    Full Text Available This study develops and makes composite observed variables from individual Investment Opportunity Set (IOS proxies into one latent variable using structural equation models with a confirmatory factor analysis approach. Six composite investment opportunity set proxies are then created based on some individual proxies, namely price related IOS and investment related IOS. These composite IOS proxies are correlated with the real growth to prove that the model has consistency and ability to predict the real growth. A confirmatory factor analysis results in all observed variables that make latent variables for each model show different result in every model. At model 1, the CFA result show   that every price related IOS proxies at model 1 have significant measurement model fit. At model 2, the Confirmatory Factor Analysis (CFA result show that every price related IOS proxies at model 2 have significant measurement model fit, except for one proxies named Rasio Capital Expenditure to Total Book Asset (RACTE. At model 3, the CFA result show that every price related IOS proxies at model 2 have significant measurement model fit, except for one proxies named Book Value of Property, Plant and Equipment to Book Value of Asset(BVPPEBVA. At model 4, the CFA result show   that every price related IOS proxies at model 1 have significant measurement model fit. At model 5, the CFA result show   that every price related IOS proxies at model 1 have significant measurement model fit. At model 6, the CFA result show that there is no significant measurement model fit for every investment related IOS proxies. Correlation test for all models show almost different result in every models. At model 1, the correlation test show that there is a weak, not significant-positive correlation between price related IOS proxies as latent variable, and real growth proxies. At model 2, the correlation test shows that there is a weak, significant negative correlation between price

  9. Development of a Body Image Concern Scale using both exploratory and confirmatory factor analyses in Chinese university students

    Directory of Open Access Journals (Sweden)

    He W

    2017-05-01

    Full Text Available Wenxin He, Qiming Zheng, Yutian Ji, Chanchan Shen, Qisha Zhu, Wei Wang Department of Clinical Psychology and Psychiatry, School of Public Health, Zhejiang University College of Medicine, Hangzhou, People’s Republic of China Background: The body dysmorphic disorder is prevalent in general population and in psychiatric, dermatological, and plastic-surgery patients, but there lacks a structure-validated, comprehensive self-report measure of body image concerns, which is established through both exploratory and confirmatory factor analyses. Methods: We have composed a 34-item matrix targeting the body image concerns and trialed it in 328 male and 365 female Chinese university students. Answers to the matrix dealt with treatments including exploratory factor analyses, reserve of qualified items, and confirmatory factor analyses of latent structures. Results: Six latent factors, namely the Social Avoidance, Appearance Dissatisfaction, Preoccupation with Reassurance, Perceived Distress/Discrimination, Defect Hiding, and Embarrassment in Public, were identified. The factors and their respective items have composed a 24-item questionnaire named as the Body Image Concern Scale. Each factor earned a satisfactory internal reliability, and the intercorrelations between these factors were in a median level. Women scored significantly higher than men did on the Appearance Dissatisfaction, Preoccupation with Reassurance, and Defect Hiding. Conclusion: The Body Image Concern Scale has displayed its structure validation and gender preponderance in Chinese university students. Keywords: body dysmorphic disorder, body image, factor analysis, questionnaire development

  10. Effects of Informative and Confirmatory Feedback on Brain Activation During Negative Feedback Processing

    Directory of Open Access Journals (Sweden)

    Yeon-Kyoung eWoo

    2015-06-01

    Full Text Available The current study compared the effects of informative and confirmatory feedback on brain activation during negative feedback processing. For confirmatory feedback trials, participants were informed that they had failed the task, whereas informative feedback trials presented task relevant information along with the notification of their failure. Fourteen male undergraduates performed a series of spatial-perceptual tasks and received feedback while their brain activity was recorded. During confirmatory feedback trials, greater activations in the amygdala, dorsal anterior cingulate cortex, and the thalamus (including the habenular were observed in response to incorrect responses. These results suggest that confirmatory feedback induces negative emotional reactions to failure. In contrast, informative feedback trials elicited greater activity in the dorsolateral prefrontal cortex (DLPFC when participants experienced failure. Further psychophysiological interaction (PPI analysis revealed a negative coupling between the DLPFC and the amygdala during informative feedback relative to confirmatory feedback trials. These findings suggest that providing task-relevant information could facilitate implicit down-regulation of negative emotions following failure.

  11. High temperature measurements in severe accident experiments on the PLINIUS Platform

    International Nuclear Information System (INIS)

    Bouyer, V.; Cassiaut-Louis, N.; Fouquart, P.; Journeau, C.; Piluso, P.; Parga, C.

    2013-06-01

    Severe accident experiments are conducted on the PLINIUS platform in Cadarache, using prototypic corium. During these experiments, it is essential to measure the temperature to know the thermo-physical state of the corium in static and dynamic conditions or to monitor the concrete ablation phenomenology. Temperature in the corium can reach about 2000 to 3000 K. Such aggressive conditions restrict the type of diagnostics that can be employed to do high temperature measurements during the experiments. We employ both non-intrusive (pyrometers) and intrusive (K-type and C-type thermocouples) diagnostics. In this paper, we present the different high temperature measurements techniques and the results that can be obtained in severe accident experiments as corium heating tests and molten core concrete interaction experiments. (authors)

  12. Selective exposure to information: how different modes of decision making affect subsequent confirmatory information processing.

    Science.gov (United States)

    Fischer, Peter; Fischer, Julia; Weisweiler, Silke; Frey, Dieter

    2010-12-01

    We investigated whether different modes of decision making (deliberate, intuitive, distracted) affect subsequent confirmatory processing of decision-consistent and inconsistent information. Participants showed higher levels of confirmatory information processing when they made a deliberate or an intuitive decision versus a decision under distraction (Studies 1 and 2). As soon as participants have a cognitive (i.e., deliberate cognitive analysis) or affective (i.e., intuitive and gut feeling) reason for their decision, the subjective confidence in the validity of their decision increases, which results in increased levels of confirmatory information processing (Study 2). In contrast, when participants are distracted during decision making, they are less certain about the validity of their decision and thus are subsequently more balanced in the processing of decision-relevant information.

  13. Time-integrated CP violation measurements in the B mesons system at the LHCb experiment

    CERN Document Server

    Cardinale, R

    2016-01-01

    Time-integrated CP violation measurements in the B meson system provide information for testing the CKM picture of CP violation in the Standard Model. A review of recent results from the LHCb experiment is presented.

  14. Improvement of the photon flux measurement at the BGO-OD experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kohl, Katrin [Physikalisches Institut, Universitaet Bonn (Germany); Collaboration: BGO-OD-Collaboration

    2016-07-01

    The BGO-OD experiment at the ELSA accelerator facility at Bonn investigates the internal reaction mechanisms of the nucleon, using an energy tagged bremsstrahlung photon beam. Absolute normalisation of the beam flux is required for cross section determination. In this talk the measurement principle is presented, and an improved method of the photon flux monitoring of the experiment is introduced.

  15. Transgender Individuals' Workplace Experiences: The Applicability of Sexual Minority Measures and Models

    Science.gov (United States)

    Brewster, Melanie E.; Velez, Brandon; DeBlaere, Cirleen; Moradi, Bonnie

    2012-01-01

    The present study explored whether 3 existing measures of workplace constructs germane to the experiences of sexual minority people could be modified to improve their applicability with transgender individuals. To this end, the Workplace Heterosexist Experiences Questionnaire (WHEQ; C. R. Waldo, 1999); the Lesbian, Gay, Bisexual, and Transgendered…

  16. Optimized collection, storage and measurement of radon and radon decay products - school experiments

    International Nuclear Information System (INIS)

    Philipsborn, H. von; Geipel, R.; Just, G.

    1998-01-01

    Schools are expected more than ever to teach in physics and chemistry an understanding of radioactivity in its many aspects. Simple experiments on the occurrence, the measurement and the properties of radionuclides are necessary for true understanding. Such experiments are now possible with novel methods of collection and storage of ubiquitous radon and radon decay products from air, water and solids. (orig.) [de

  17. Measurements of loop antenna loading in RF heating experiments on the KT-5C tokamak

    International Nuclear Information System (INIS)

    Zhai Kan; Deng Bihe; Wen Yizhi; Wan Shude; Liu Wandong; Yu Wen; Yu Changxun

    1997-01-01

    A new method to measure the loop antenna loadings in the RF wave heating experiments (IBWH at reasonable RF power with relatively low frequency) on the KT-5C device is presented. The method is characterized by determining the RF current ratio only, so it eases the needs of instruments and simplifies the requirements for calibration and data processing in the experiments

  18. How to measure experiences of healthcare quality in Denmark among patients with heart disease? The development and psychometric evaluation of a patient-reported instrument.

    Science.gov (United States)

    Zinckernagel, Line; Schneekloth, Nanna; Zwisler, Ann-Dorthe Olsen; Ersbøll, Annette Kjær; Rod, Morten Hulvej; Jensen, Poul Dengsøe; Timm, Helle; Holmberg, Teresa

    2017-10-30

    Measuring the quality of care as experienced by patients is increasingly recognised as a way of improving healthcare services. However, disease-specific measures that take the patient journey into account are needed. This paper presents the development of such a measure for patients with heart disease and details the psychometric evaluation. The questionnaire was developed based on a literature review, qualitative interviews and a pilot-test. The psychometric evaluation of the measure was assessed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA), Cronbach's alpha coefficient and differential item functioning analysis with data from a population-based survey. Denmark in 2013-2014. Nineteen heart patients, four relatives and eight health professionals participated in qualitative interviews in the development phase, and 15 patients participated in the pilot-test. The questionnaire was subsequently sent to a random sample of 5000 heart patients who were diagnosed in 2013. The comprehensive development phase and pilot-testing contributed to high content validity of the questionnaire. Eligible questionnaire responses were received from 2496 patients. EFA indicated a nine-factor model: communication at the hospital, communication with the general practitioner, information on disease and treatment, information on psychosocial aspects, rehabilitation/support, organisation, medication, involvement of relatives and consideration of comorbidity. CFA confirmed the proposed factor structure (eg, goodness-of-fit index=0.88, adjusted goodness-of-fit index=0.86, root mean square error of approximation=0.05), and Cronbach's alpha coefficient revealed good internal consistency of the factors (range: 0.69-0.93). The results suggest that this disease-specific patient-reported experience measure is of good quality when measuring the quality of care among heart patients. The inclusion of patients in the development phase contributed to high content validity

  19. Confirmatory Factor Analysis of the School-Based Assessment Evaluation Scale Among Teachers

    Directory of Open Access Journals (Sweden)

    Nor Hasnida Che Md. Ghazali

    2016-09-01

    Full Text Available The school-based assessment (SBA system is a holistic assessment system that is conducted in schools by subject teachers in assessing the students cognitive (intellect, affective (emotional and spiritual and psychomotor (physical aspects. It is in line with the National Philosophy of Education and the Standards-based School Curriculum in Malaysia. In order to evaluate the implementation of SBA, a measurement scale was validated. Questionnaire was used as an instrument for data collection. 776 primary and secondary school teachers were selected as respondents using stratified random sampling. The data was analyzed with SPSS and AMOS version 18. The aim of this paper was to explore different factor structures of the SBA evaluation scale by using the second-order Confirmatory Factor Analysis. Results indicated that the SBA evaluation model was a valid and reliable scale. The input measurement model was validated with two factors (personnel qualifications and physical infrastructure, process measurement model was validated with six factors (‘attitude’, ‘understanding’, ‘skills’, ‘challenges’, ‘moderation’ and ‘monitoring’ and product measurement model was validated with two factors (‘students’ attitude’ and ‘students’ motivation’. This study provides support for using a valid instrument in evaluating the implementation of SBA in schools. Furthermore, the CFA procedures used supported the conceptual framework set out earlier. Thus, it presents clearly the importance of the evaluation process of any education system to follow all the dimensions outlined in the evaluation model proposed by Daniel Stufflebeam.       Sistem Penilaian Berbasis Sekolah (SBA adalah sistem penilaian holistik yang dilakukan di sekolah-sekolah oleh guru mata pelajaran dalam menilai kognitif (kecerdasan, afektif (emosional dan spiritual dan psikomotorik (fisik siswa. Hal ini sejalan dengan Filsafat Pendidikan Nasional dan Kurikulum

  20. Dangers of "confirmatory" cancer trials that fail to actually test the original hypothesis.

    Science.gov (United States)

    Markman, Maurie

    2014-04-01

    The concept of "confirmatory" studies is a standard and important component of the overall clinical trials strategy in oncology. However, it is critical that such studies are similar enough in basic design and how they are conducted that they actually have the realistic potential to confirm, or refute, objectively the findings of the original study. In this commentary, two examples of clinical studies in the gynecologic oncology arena suggested by some to serve as "confirmatory" trials for the original reports demonstrate both the dangers and potential inappropriateness of such conclusions.

  1. Psychometric properties of the Dresden Body Image Questionnaire: A multiple-group confirmatory factor analysis across sex and age in a Dutch non-clinical sample.

    Directory of Open Access Journals (Sweden)

    Mia Scheffers

    Full Text Available Body image has implications for psychosocial functioning and quality of life and its disturbance is reported in a broad range of psychiatric disorders. In view of the lack of instruments in Dutch measuring body image as a broad concept, we set out to make an instrument available that reflects the multidimensional character of this construct by including more dimensions than physical appearance. The Dresden Körperbildfragebogen (DBIQ, Dresden Body Image Questionnaire particularly served this purpose. The DBIQ consists of 35 items and five subscales: body acceptance, sexual fulfillment, physical contact, vitality, and self-aggrandizement. The main objective of the present study was to evaluate the psychometric properties of the Dutch translation of the Dresden Body Image Questionnaire (DBIQ-NL in a non-clinical sample.The psychometric properties of the DBIQ-NL were examined in a non-clinical sample of 988 respondents aged between 18 and 65. We investigated the subscales' internal consistency and test-retest reliability. In order to establish construct validity we evaluated the association with a related construct, body cathexis, and with indices of self-esteem and psychological wellbeing. The factor structure of the DBIQ-NL was examined via confirmatory factor analysis (CFA. The equivalence of the measurement model across sex and age was evaluated by multiplegroup confirmatory factor analyses.Confirmatory factor analyses showed a structure in accordance with the original scale, where model fit was improved significantly by moving one item to another subscale. Multiple group confirmatory factor analysis across sex and age demonstrated partial strong invariance. Internal consistency was good with little overlap between the subscales. Temporal reliability and construct validity were satisfactory.Results indicate that the DBIQ-NL is a reliable and valid instrument for non-clinical subjects. This provides a sound basis for further investigation of the

  2. Psychometric properties of the Dresden Body Image Questionnaire: A multiple-group confirmatory factor analysis across sex and age in a Dutch non-clinical sample.

    Science.gov (United States)

    Scheffers, Mia; van Duijn, Marijtje A J; Bosscher, Ruud J; Wiersma, Durk; Schoevers, Robert A; van Busschbach, Jooske T

    2017-01-01

    Body image has implications for psychosocial functioning and quality of life and its disturbance is reported in a broad range of psychiatric disorders. In view of the lack of instruments in Dutch measuring body image as a broad concept, we set out to make an instrument available that reflects the multidimensional character of this construct by including more dimensions than physical appearance. The Dresden Körperbildfragebogen (DBIQ, Dresden Body Image Questionnaire) particularly served this purpose. The DBIQ consists of 35 items and five subscales: body acceptance, sexual fulfillment, physical contact, vitality, and self-aggrandizement. The main objective of the present study was to evaluate the psychometric properties of the Dutch translation of the Dresden Body Image Questionnaire (DBIQ-NL) in a non-clinical sample. The psychometric properties of the DBIQ-NL were examined in a non-clinical sample of 988 respondents aged between 18 and 65. We investigated the subscales' internal consistency and test-retest reliability. In order to establish construct validity we evaluated the association with a related construct, body cathexis, and with indices of self-esteem and psychological wellbeing. The factor structure of the DBIQ-NL was examined via confirmatory factor analysis (CFA). The equivalence of the measurement model across sex and age was evaluated by multiplegroup confirmatory factor analyses. Confirmatory factor analyses showed a structure in accordance with the original scale, where model fit was improved significantly by moving one item to another subscale. Multiple group confirmatory factor analysis across sex and age demonstrated partial strong invariance. Internal consistency was good with little overlap between the subscales. Temporal reliability and construct validity were satisfactory. Results indicate that the DBIQ-NL is a reliable and valid instrument for non-clinical subjects. This provides a sound basis for further investigation of the DBIQ-NL in a

  3. Confirmatory Factor Analysis of the French Version of the Anticipatory and Consummatory Interpersonal Pleasure Scale

    Directory of Open Access Journals (Sweden)

    Joséphine Chaix

    2017-07-01

    Full Text Available The Anticipatory and Consummatory Interpersonal Pleasure Scale (ACIPS, a measure specifically designed to assess hedonic capacity for social and interpersonal pleasure, was used to evaluate the presence of social anhedonia in patients as well as the general population. The first goal of this study was to validate the structure of the French version of the ACIPS. The second objective was to verify whether a one, two or three factor solution is most appropriate for the ACIPS scale. The French version of the ACIPS was tested on 263 French-speaking pre-graduate students or professional volunteers. For the confirmatory factor analysis, data were treated as categorical ordinal and all the models were estimated using a robust weighted least squares estimator with adjustments for the mean and variance. Three models were estimated. A one-factor model representing a general undifferentiated “pleasure” latent construct was first tested on the 17 ACIPS items. A two-factor model distinguishing anticipatory-pleasure and consummatory-pleasure was tested next. Finally, a three-factor model including subdomains of intimate social interactions, group social interactions, and social bonding was tested. The one and two-factor models showed a somewhat poor fit to the data. However, the goodness of fit of the three factor model was adequate. These results suggest that individuals who enjoyed interaction in one of these three subdomains were more likely to enjoy doing so in the two other domains. However, on the basis of the comparison between the one and three factor models, these three types of interactions may not be considered as indistinguishable. Rather, they represent distinct and theoretically meaningful dimensions. These results show the French version of the ACIPS is a useful and valid scale to measure the capacity of savoring different kinds of social relationships.

  4. Constructing the Japanese version of the Maslach Burnout Inventory-Student Survey: Confirmatory factor analysis.

    Science.gov (United States)

    Tsubakita, Takashi; Shimazaki, Kazuyo

    2016-01-01

    To examine the factorial validity of the Maslach Burnout Inventory-Student Survey, using a sample of 2061 Japanese university students majoring in the medical and natural sciences (67.9% male, 31.8% female; Mage  = 19.6 years, standard deviation = 1.5). The back-translated scale used unreversed items to assess inefficacy. The inventory's descriptive properties and Cronbach's alphas were calculated using SPSS software. The present authors compared fit indices of the null, one factor, and default three factor models via confirmatory factor analysis with maximum-likelihood estimation using AMOS software, version 21.0. Intercorrelations between exhaustion, cynicism, and inefficacy were relatively higher than in prior studies. Cronbach's alphas were 0.76, 0.85, and 0.78, respectively. Although fit indices of the hypothesized three factor model did not meet the respective criteria, the model demonstrated better fit than did the null and one factor models. The present authors added four paths between error variables within items, but the modified model did not show satisfactory fit. Subsequent analysis revealed that a bi-factor model fit the data better than did the hypothesized or modified three factor models. The Japanese version of the Maslach Burnout Inventory-Student Survey needs minor changes to improve the fit of its three factor model, but the scale as a whole can be used to adequately assess overall academic burnout in Japanese university students. Although the scale was back-translated, two items measuring exhaustion whose expressions overlapped should be modified, and all items measuring inefficacy should be reversed in order to statistically clarify the factorial difference between the scale's three factors. © 2015 The Authors. Japan Journal of Nursing Science © 2015 Japan Academy of Nursing Science.

  5. A Second-Order Confirmatory Factor Analysis of the Moral Distress Scale-Revised for Nurses.

    Science.gov (United States)

    Sharif Nia, Hamid; Shafipour, Vida; Allen, Kelly-Ann; Heidari, Mohammad Reza; Yazdani-Charati, Jamshid; Zareiyan, Armin

    2017-01-01

    Moral distress is a growing problem for healthcare professionals that may lead to dissatisfaction, resignation, or occupational burnout if left unattended, and nurses experience different levels of this phenomenon. This study aims to investigate the factor structure of the Persian version of the Moral Distress Scale-Revised in intensive care and general nurses. This methodological research was conducted with 771 nurses from eight hospitals in the Mazandaran Province of Iran in 2017. Participants completed the Moral Distress Scale-Revised, data collected, and factor structure assessed using the construct, convergent, and divergent validity methods. The reliability of the scale was assessed using internal consistency (Cronbach's alpha, Theta, and McDonald's omega coefficients) and construct reliability. Ethical considerations: This study was approved by the Ethics Committee of Mazandaran University of Medical Sciences. The exploratory factor analysis ( N = 380) showed that the Moral Distress Scale-Revised has five factors: lack of professional competence at work, ignoring ethical issues and patient conditions, futile care, carrying out the physician's orders without question and unsafe care, and providing care under personal and organizational pressures, which explained 56.62% of the overall variance. The confirmatory factor analysis ( N = 391) supported the five-factor solution and the second-order latent factor model. The first-order model did not show a favorable convergent and divergent validity. Ultimately, the Moral Distress Scale-Revised was found to have a favorable internal consistency and construct reliability. The Moral Distress Scale-Revised was found to be a multidimensional construct. The data obtained confirmed the hypothesis of the factor structure model with a latent second-order variable. Since the convergent and divergent validity of the scale were not confirmed in this study, further assessment is necessary in future studies.

  6. Some experience with measurements of stack releases and their correlation with environmental measurements

    International Nuclear Information System (INIS)

    Czarnecki, J.

    1988-01-01

    The first nuclear power plants (NPP) in Switzerland were built during the late 1960s and the early 1970s (PWR-Beznau and BWR-Muhleberg). A new generation of NPPs were built ten years later (PWR-Goesgen and BWR-Leibstadt). In all these NPP special attention was given to the sampling and measurements of the releases of radioactive materials, in particular long lived aerosols and J-131. The sampling systems at the Swiss NPP were originally installed on the basis of the American National Standard Guide to sampling Airborne Radioactive Materials in Nuclear Facilities, (ANSI NI3, 1 - 1969) or equivalent standards such as ISO 2889 and DIN 25423. Unfortunately, the sampling systems described in these guides cover only that fraction of radioactive aerosols, which is preferentially retained in various portions of the respiratory tract (0.3 to 10 Μm). In a NPP one can expect during an accident a very wide range of particles with diameters as large as 100 and more Μm, which can be transported away by the stack effluent and may not be properly sampled and measured. It should be taken into account that there are some non filtered rooms and that filters can fail or even break. Such particles when released cause a ground contamination in the vicinity of the plant. Such an event occurred in September 1986 in the NPP-Muhleberg

  7. The effect of noise in a performance measure on work motivation: A real effort laboratory experiment

    NARCIS (Netherlands)

    Sloof, R.; van Praag, C.M.

    2008-01-01

    This paper reports the results of an individual real effort laboratory experiment where subjects are paid for measured performance. Measured performance equals actual performance plus noise. We compare a stable environment where the noise is small with a volatile environment where the noise is

  8. Measurement of 3-Axis Magnetic Fields Induced by Current Wires Using a Smartphone in Magnetostatics Experiments

    Science.gov (United States)

    Setiawan, B.; Septianto, R. D.; Suhendra, D.; Iskandar, F.

    2017-01-01

    This paper describes the use of an inexpensive smartphone's magnetic sensor to measure magnetic field components (B[subscript x], B[subscript y] and B[subscript z]) induced by current wires in magnetostatic experiments. The variable parameters used to measure the magnetic sensor's capabilities were: the geometrical shapes of the wire, current…

  9. The effect of noise in a performance measure on work motivation: A real effort laboratory experiment

    NARCIS (Netherlands)

    Sloof, R.; van Praag, C.M.

    2010-01-01

    This paper reports the results of an individual real effort laboratory experiment where subjects are paid for measured performance. Measured performance equals actual performance plus noise. We compare a stable environment where the noise is small with a volatile environment where the noise is

  10. The energy balance experiment EBEX-2000. Part III: Behaviour and quality of the radiation measurements

    NARCIS (Netherlands)

    Kohsiek, W.; Liebethal, C.; Foken, T.; Vogt, R.; Oncley, S.P.; Bernhofer, C.; Debruin, H.A.R.

    2007-01-01

    An important part of the Energy Balance Experiment (EBEX-2000) was the measurement of the net radiation and its components. Since the terrain, an irrigated cotton field, could not be considered homogeneous, radiation measurements were made at nine sites using a variety of radiation instruments,

  11. Experiences with automatic N and P measurements of an activated sludge process in a research environment

    DEFF Research Database (Denmark)

    Isaacs, Steven Howard; Temmink, H.

    1996-01-01

    Some of the advantages of on-line automatic measurement of ammonia, nitrate and phosphate for studying activated sludge systems are pointed out with the help of examples of batch experiments. Sample taking is performed by cross-flow filtration and measurement of all three analytes is performed by...

  12. Numerical Study of the influence of a ribbon geometry of experiment on measuring particle angular distributions

    International Nuclear Information System (INIS)

    Artemov, A.S.

    1996-01-01

    The values and nature of systematic errors in small-angle particle scattering experiments using ribbon-like beams are investigated by numerical simulation. As shown, the extent of the influence of a ribbon geometry of experiment on the result of measurement is significantly dependent on the shape of the measured angular distribution in an elementary act of interaction. The algorithm of experimental material treatment, obtained in measuring the widths at half maximum of the angular differential cross sections of secondary particles, is presented using an example of specific distributions and certain experimental setup. (author). 12 refs., 7 figs

  13. Image analysis to measure sorting and stratification applied to sand-gravel experiments

    OpenAIRE

    Orrú, C.

    2016-01-01

    The main objective of this project is to develop new measuring techniques for providing detailed data on sediment sorting suitable for sand-gravel laboratory experiments. Such data will be of aid in obtaining new insights on sorting mechanisms and improving prediction capabilities of morphodynamic models. Two measuring techniques have been developed. The first technique is aimed at measuring the size stratification of a sand-gravel deposit through combining image analysis and a sediment remov...

  14. Measurements of Plasma Expansion due to Background Gas in the Electron Diffusion Gauge Experiment

    International Nuclear Information System (INIS)

    Morrison, Kyle A.; Paul, Stephen F.; Davidson, Ronald C.

    2003-01-01

    The expansion of pure electron plasmas due to collisions with background neutral gas atoms in the Electron Diffusion Gauge (EDG) experiment device is observed. Measurements of plasma expansion with the new, phosphor-screen density diagnostic suggest that the expansion rates measured previously were observed during the plasma's relaxation to quasi-thermal-equilibrium, making it even more remarkable that they scale classically with pressure. Measurements of the on-axis, parallel plasma temperature evolution support the conclusion

  15. Characterization of the Caliban and Prospero Critical Assemblies Neutron Spectra for Integral Measurements Experiments

    Science.gov (United States)

    Casoli, P.; Authier, N.; Jacquet, X.; Cartier, J.

    2014-04-01

    Caliban and Prospero are two highly enriched uranium metallic core reactors operated on the CEA Center of Valduc. These critical assemblies are suitable for integral experiments, such as fission yields measurements or perturbation measurements, which have been carried out recently on the Caliban reactor. Different unfolding methods, based on activation foils and fission chambers measurements, are used to characterize the reactor spectra and especially the Caliban spectrum, which is very close to a pure fission spectrum.

  16. Confirmatory factor analysis of the Multi-dimensional Emotional Empathy Scale in the South African context

    Directory of Open Access Journals (Sweden)

    Chantal Olckers

    2010-11-01

    Full Text Available Orientation: Empathy is a core competency in aiding individuals to address the challenges of social living. An indicator of emotional intelligence, it is useful in a globalising and cosmopolitan world. Moreover, managing staff, stakeholders and conflict in many social settings relies on communicative skills, of which empathy forms a large part. Empathy plays a pivotal role in negotiating, persuading and influencing behaviour. The skill of being able to empathise thus enables the possessor to attune to the needs of clients and employees and provides opportunities to become responsive to these needs. Research purpose: This study attempted to determine the construct validity of the Multi-dimensional Emotional Empathy Scale within the South African context. Motivation for the study: In South Africa, a large number of psychometrical instruments have been adopted directly from abroad. Studies determining the construct validity of several of these imported instruments, however, have shown that these instruments are not suited for use in the South African context. Research design, approach and method: The study was based on a quantitative research method with a survey design. A convenience sample of 212 respondents completed the Multi-dimensional Emotional Empathy Scale. The constructs explored were Suffering, Positive Sharing, Responsive Crying, Emotional Attention, a Feel for Others and Emotional Contagion. The statistical procedure used was a confirmatory factor analysis. Main findings: The study showed that, from a South African perspective, the Multi-dimensional Emotional Empathy Scale lacks sufficient construct validity. Practical/managerial implications: Further refinement of the model would provide valuable information that would aid people to be more appreciative of individual contributions, to meet client needs and to understand the motivations of others. Contribution/value-add: From a South African perspective, the findings of this study are

  17. Confirmatory factor analysis of the Autonomy over Tobacco Scale (AUTOS) in adults.

    Science.gov (United States)

    Wellman, Robert J; DiFranza, Joseph R; O'Loughlin, Jennifer

    2015-11-01

    The Autonomy over Tobacco Scale (AUTOS), a 12-item self-administered questionnaire, was designed to measure autonomy in three correlated lower-order symptom domains: withdrawal, psychological dependence, and cue-induced craving. The factor structure of the AUTOS remains an open question; confirmatory analyses in adolescents supported the hierarchical structure, while exploratory analyses in adolescents and adults yield single-factor solutions. Here we seek to determine whether the hypothesized hierarchical structure is valid in adult smokers. The AUTOS was administered to two independent convenience samples of adult current smokers: a calibration sample recruited in the US for online studies, and a confirmation sample drawn from the prospective Nicotine Dependence in Teens study in Montreal. We tested competing hierarchical and single-factor models using the robust weighted least-squares (WLSMV) estimation method. A single-factor model that allowed correlated error variances between theoretically related items fit well in the calibration sample (n = 434), χ(2)SB(52) = 165.71; χ(2)/df = 3.19; SRMR = 0.03; CFI = 0.96; NNFI = 0.95; RMSEA = 0.07 (95% CI: 0.06, 0.08). Reliability of the single factor was high (ωB = 0.92) and construct validity was adequate. In the confirmation sample (n = 335), a similar model fit well:χ(2)SB(53) = 126.94; χ(2)/df = 2.44; SRMR = 0.04; CFI = 0.95; NNFI = 0.93; RMSEA = 0.07 (95% CI: 0.05, 0.08). Reliability of the single factor was again high (ωB = 0.92) and construct validity was adequate. The AUTOS is unidimensional in adult smokers. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. University student depression inventory (USDI): confirmatory factor analysis and review of psychometric properties.

    Science.gov (United States)

    Romaniuk, Madeline; Khawaja, Nigar G

    2013-09-25

    The 30-item USDI is a self-report measure that assesses depressive symptoms among university students. It consists of three correlated three factors: lethargy, cognitive-emotional and academic motivation. The current research used confirmatory factor analysis to asses construct validity and determine whether the original factor structure would be replicated in a different sample. Psychometric properties were also examined. Participants were 1148 students (mean age 22.84 years, SD=6.85) across all faculties from a large Australian metropolitan university. Students completed a questionnaire comprising of the USDI, the depression anxiety stress scale (DASS) and Life Satisfaction Scale (LSS). The three correlated factor model was shown to be an acceptable fit to the data, indicating sound construct validity. Internal consistency of the scale was also demonstrated to be sound, with high Cronbach alpha values. Temporal stability of the scale was also shown to be strong through test-retest analysis. Finally, concurrent and discriminant validity was examined with correlations between the USDI and DASS subscales as well as the LSS, with sound results further supporting the construct validity of the scale. Cut-off points were also developed to aid total score interpretation. Response rates are unclear. In addition, the representativeness of the sample could be improved potentially through targeted recruitment (i.e. reviewing the online sample statistics during data collection, examining the representativeness trends and addressing particular faculties within the university that were underrepresented). The USDI provides a valid and reliable method of assessing depressive symptoms found among university students. © 2013 Elsevier B.V. All rights reserved.

  19. Confirmatory Factor Analysis of the Finnish Job Content Questionnaire (JCQ in 590 Professional Musicians

    Directory of Open Access Journals (Sweden)

    Heidi Vastamäki

    2017-07-01

    Full Text Available Background: Poorly functioning work environments may lead to dissatisfaction for the employees and financial loss for the employers. The Job Content Questionnaire (JCQ was designed to measure social and psychological characteristics of work environments. Objective: To investigate the factor construct of the Finnish 14-item version of JCQ when applied to professional orchestra musicians. Methods: In a cross-sectional survey, the questionnaire was sent by mail to 1550 orchestra musicians and students. 630 responses were received. Full data were available for 590 respondents (response rate 38%.The questionnaire also contained questions on demographics, job satisfaction, health status, health behaviors, and intensity of playing music. Confirmatory factor analysis of the 2-factor model of JCQ was conducted. Results: Of the 5 estimates, JCQ items in the “job demand” construct, the “conflicting demands” (question 5 explained most of the total variance in this construct (79% demonstrating almost perfect correlation of 0.63. In the construct of “job control,” “repetitive work” (question 10 demonstrated a perfect correlation index of 0.84 and the items “little decision freedom” (question 14 and “allows own decisions” (question 6 showed substantial correlations of 0.77 and 0.65. Conclusion: The 2-factor model of the Finnish 14-item version of JCQ proposed in this study fitted well into the observed data. The “conflicting demands,” “repetitive work,” “little decision freedom,” and “allows own decisions” items demonstrated the strongest correlations with latent factors suggesting that in a population similar to the studied one, especially these items should be taken into account when observed in the response of a population.

  20. Confirmatory Factor Analysis of the Finnish Job Content Questionnaire (JCQ) in 590 Professional Musicians.

    Science.gov (United States)

    Vastamäki, Heidi; Vastamäki, Martti; Laimi, Katri; Saltychev, Michail

    2017-07-01

    Poorly functioning work environments may lead to dissatisfaction for the employees and financial loss for the employers. The Job Content Questionnaire (JCQ) was designed to measure social and psychological characteristics of work environments. To investigate the factor construct of the Finnish 14-item version of JCQ when applied to professional orchestra musicians. In a cross-sectional survey, the questionnaire was sent by mail to 1550 orchestra musicians and students. 630 responses were received. Full data were available for 590 respondents (response rate 38%).The questionnaire also contained questions on demographics, job satisfaction, health status, health behaviors, and intensity of playing music. Confirmatory factor analysis of the 2-factor model of JCQ was conducted. Of the 5 estimates, JCQ items in the "job demand" construct, the "conflicting demands" (question 5) explained most of the total variance in this construct (79%) demonstrating almost perfect correlation of 0.63. In the construct of "job control," "opinions influential" (question 10) demonstrated a perfect correlation index of 0.84 and the items "little decision freedom" (question 14) and "allows own decisions" (question 6) showed substantial correlations of 0.77 and 0.65. The 2-factor model of the Finnish 14-item version of JCQ proposed in this study fitted well into the observed data. The "conflicting demands," "opinions influential," "little decision freedom," and "allows own decisions" items demonstrated the strongest correlations with latent factors suggesting that in a population similar to the studied one, especially these items should be taken into account when observed in the response of a population.

  1. Subgroup analyses in confirmatory clinical trials: time to be specific about their purposes

    NARCIS (Netherlands)

    Tanniou, J.; Tweel, I. van der; Teerenstra, S.; Roes, K.C.

    2016-01-01

    BACKGROUND: It is well recognized that treatment effects may not be homogeneous across the study population. Subgroup analyses constitute a fundamental step in the assessment of evidence from confirmatory (Phase III) clinical trials, where conclusions for the overall study population might not hold.

  2. Collinear Latent Variables in Multilevel Confirmatory Factor Analysis : A Comparison of Maximum Likelihood and Bayesian Estimation

    NARCIS (Netherlands)

    Can, Seda; van de Schoot, Rens|info:eu-repo/dai/nl/304833207; Hox, Joop|info:eu-repo/dai/nl/073351431

    2015-01-01

    Because variables may be correlated in the social and behavioral sciences, multicollinearity might be problematic. This study investigates the effect of collinearity manipulated in within and between levels of a two-level confirmatory factor analysis by Monte Carlo simulation. Furthermore, the

  3. 75 FR 57532 - In the Matter of: Stone & Webster Construction, Inc.; Confirmatory Order (Effective Immediately)

    Science.gov (United States)

    2010-09-21

    ... Any person adversely affected by this Confirmatory Order, other than Shaw, may request a hearing... Safety Conscious Work Environment (SCWE) and Safety Culture: At the parent company, The Shaw Group Inc... performance evaluations; Periodic independent culture surveys. For nuclear maintenance sites: A SCWE Procedure...

  4. Exploratory and Confirmatory Factor Analyses of the WISC-IV with Gifted Students

    Science.gov (United States)

    Rowe, Ellen W.; Dandridge, Jessica; Pawlush, Alexandra; Thompson, Dawna F.; Ferrier, David E.

    2014-01-01

    These 2 studies investigated the factor structure of the Wechsler Intelligence Scale for Children-4th edition (WISC-IV; Wechsler, 2003a) with exploratory factor analysis (EFA; Study 1) and confirmatory factor analysis (CFA; Study 2) among 2 independent samples of gifted students. The EFA sample consisted of 225 children who were referred for a…

  5. The Two- and Three-Dimensional Models of the HK-WISC: A Confirmatory Factor Analysis.

    Science.gov (United States)

    Chan, David W.; Lin, Wen-Ying

    1996-01-01

    Confirmatory analyses on the Hong Kong Wechsler Intelligence Scale for Children (HK-WISC) provided support for composite score interpretation based on the two- and three-dimensional models across age levels. Test sample was comprised of 1,100 children, ranging in age from 5 to 15 years at all 11 age levels specified by the HK-WISC. (KW)

  6. Confirmatory Factor Analysis of the WISC-III with Child Psychiatric Inpatients.

    Science.gov (United States)

    Tupa, David J.; Wright, Margaret O'Dougherty; Fristad, Mary A.

    1997-01-01

    Factor models of the Wechsler Intelligence Scale for Children-Third Edition (WISC-III) for one, two, three, and four factors were tested using confirmatory factor analysis with a sample of 177 child psychiatric inpatients. The four-factor model proposed in the WISC-III manual provided the best fit to the data. (SLD)

  7. The Internal Structure of Positive and Negative Affect: A Confirmatory Factor Analysis of the PANAS

    Science.gov (United States)

    Tuccitto, Daniel E.; Giacobbi, Peter R., Jr.; Leite, Walter L.

    2010-01-01

    This study tested five confirmatory factor analytic (CFA) models of the Positive Affect Negative Affect Schedule (PANAS) to provide validity evidence based on its internal structure. A sample of 223 club sport athletes indicated their emotions during the past week. Results revealed that an orthogonal two-factor CFA model, specifying error…

  8. A Confirmatory Approach to Examining the Factor Structure of the Strengths and Difficulties Questionnaire (SDQ)

    DEFF Research Database (Denmark)

    Niclasen, Janni; Skovgaard, Anne Mette; Andersen, Anne-Marie Nybo

    2013-01-01

    The aim of this study was to examine the factor structure of the Strengths and Difficulties Questionnaire (SDQ) using a Structural Confirmatory Factor Analytic approach. The Danish translation of the SDQ was distributed to 71,840 parents and teachers of 5-7 and 10-12-year-old boys and girls from ...

  9. The Chinese Family Assessment Instrument (C-FAI): Hierarchical Confirmatory Factor Analyses and Factorial Invariance

    Science.gov (United States)

    Shek, Daniel T. L.; Ma, Cecilia M. S.

    2010-01-01

    Objective: This paper examines the dimensionality and factorial invariance of the Chinese Family Assessment Instrument (C-FAI) using multigroup confirmatory factor analyses (MCFAs). Method: A total of 3,649 students responded to the C-FAI in a community survey. Results: Results showed that there are five dimensions of the C-FAI (communication,…

  10. Multilevel Confirmatory Factor Analysis of the Teacher My Class Inventory-Short Form

    Science.gov (United States)

    Villares, Elizabeth; Mariani, Melissa; Sink, Christopher A.; Colvin, Kimberly

    2016-01-01

    Researchers analyzed data from elementary teachers (N = 233) to further establish the psychometric soundness of the Teacher My Class Inventory-Short Form. Supporting previous psychometric research, confirmatory factor analyses findings supported the factorial validity of the hypothesized five-factor solution. Internal reliability estimates were…

  11. 49 CFR 192.931 - How may Confirmatory Direct Assessment (CDA) be used?

    Science.gov (United States)

    2010-10-01

    ...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.931 How may Confirmatory Direct Assessment (CDA) be used? An...

  12. A Markov Chain Monte Carlo Approach to Confirmatory Item Factor Analysis

    Science.gov (United States)

    Edwards, Michael C.

    2010-01-01

    Item factor analysis has a rich tradition in both the structural equation modeling and item response theory frameworks. The goal of this paper is to demonstrate a novel combination of various Markov chain Monte Carlo (MCMC) estimation routines to estimate parameters of a wide variety of confirmatory item factor analysis models. Further, I show…

  13. Confirmatory Factor Analysis of Persian Adaptation of Multidimensional Students' Life Satisfaction Scale (MSLSS)

    Science.gov (United States)

    Hatami, Gissou; Motamed, Niloofar; Ashrafzadeh, Mahshid

    2010-01-01

    Validity and reliability of Persian adaptation of MSLSS in the 12-18 years, middle and high school students (430 students in grades 6-12 in Bushehr port, Iran) using confirmatory factor analysis by means of LISREL statistical package were checked. Internal consistency reliability estimates (Cronbach's coefficient [alpha]) were all above the…

  14. Confirmatory Factor Analysis of the WISC-IV in a Hospital Referral Sample

    Science.gov (United States)

    Devena, Sarah E.; Gay, Catherine E.; Watkins, Marley W.

    2013-01-01

    Confirmatory factor analysis was used to determine the factor structure of the Wechsler Intelligence Scale for Children-Fourth Edition (WISC-IV) scores of 297 children referred to a children's hospital in the Southwestern United States. Results support previous findings that indicate the WISC-IV is best represented by a direct hierarchical…

  15. A Confirmatory Factor Analysis of the Academic Motivation Scale with Black College Students

    Science.gov (United States)

    Cokley, Kevin

    2015-01-01

    The factor structure of the Academic Motivation Scale (AMS) was examined with a sample of 578 Black college students. A confirmatory factor analysis of the AMS was conducted. Results indicated that the hypothesized seven-factor model did not fit the data. Implications for future research with the AMS are discussed.

  16. Flow Experience as a Quality Measure in Evaluating Physically Activating Collaborative Serious Games

    Directory of Open Access Journals (Sweden)

    Kristian J. M. Kiili

    2014-09-01

    Full Text Available The measurement of the subjective playing experience is important part of the game development process. The enjoyment level that a serious game offers is a key factor in determining whether a player will be engaged in the gameplay and achieve the objectives of the game. In this paper we report the results of a game design process in which two prototypes of a collaborative exergame were studied. The main aim of the paper is to explore to what extend the measurement of flow experience can facilitate the game evaluation and design process. Alltogether 102 junior high school students participated in two user experience studies and played collaborative exergames designed to teach soft skills. Playing experience was measured with a flow questionnaire, playing behavior was observed and some of the players were interviewed. The results showed that flow experience can be used to evaluate the overall quality of the gameplay and it provides a structured approach to consider the quality of the game. However, flow does not provide detailed information about the shortages of the game and thus complementary methods is needed to identify the causes. The results also indicated that flow experience was independent of gender that supports its use in quality measurement.

  17. Precise measurement in elastic electron scattering: HAPPEX and E-158 experiments

    International Nuclear Information System (INIS)

    Vacheret, A.

    2004-12-01

    Parity Violation asymmetry measurements in elastic electron scattering are in one hand an interesting way of retrieving new informations about the sea quarks of the nucleon and in the other hand a powerful test of the Standard Model electroweak sector at low energy. This thesis describes the HAPPEX experiment at JLab and the E-158 experiment at SLAC (USA) which measure de parity violation asymmetries in elastic scattering of polarized electron on nuclei like Hydrogen or Helium and on atomic electrons. With the measurements on hadronic targets one can extract the strange quarks contribution to the charge and current density of the nucleon. With the electron-electron scattering one can test the standard model at the loop level and far from the Z pole by extracting sin 2 θ W . In this thesis we describe the formalism associated with the electroweak probe. We present in detail the experimental methods used to make such precise measurements of parity violation asymmetry. Then, we describe the experimental set-up of each experiment and in particular the electron detector and the feedback loop on the beam current for the HAPPEX experiment and the analysis of E-158 run III with a dedicated systematic study on the beam sub-pulse fluctuations. We present the preliminary results for each experiment with a comparison with the other existing results and the future experiments. (author)

  18. Confirmatory Factor Analysis of the Bases of Leader Power: First-Order Factor Model and Its Invariance Across Groups.

    Science.gov (United States)

    Rahim, M A; Magner, N R

    1996-10-01

    Confirmatory factor analyses of data (from five samples: N = 308 accountants and finance professionals, N = 578 management and non-management employees, and N = 588 employed management students in the U.S.; N = 728 management and non-management employees in S. Korea, N = 250 management and non-management bank employees in Bangladesh) on the 29 items of the Rahim Leader Power Inventory were performed with LISREL 7. The results provided support for the convergent and discriminant validities of the subscales measuring the five bases of leader power (coercive, reward, legitimate, expert, and referent), and the invariance of factor pattern and factor loadings across organizational levels and the three American samples. Additional analysis indicated that leader power profiles differed across the three national cultures represented in the study.

  19. Long Term Sorption Diffusion Experiment (LTDE-SD). Performance of main in situ experiment and results from water phase measurements

    International Nuclear Information System (INIS)

    Widestrand, Henrik; Byegaard, Johan; Nilsson, Kersti; Hoeglund, Susanne; Gustafsson, Erik; Kronberg, Magnus

    2010-12-01

    sorption to colloids in the aqueous phase was of minor importance. Furthermore, the measurements performed after a general colloid filtration showed no significant concentrations of inorganic colloids. The natural redox conditions were difficult to maintain during the experiment. Therefore the experiment was performed under the oxidizing conditions (E h ∼470 mV) that was obtained during the circulation of the groundwater. Sorption occurred on equipment during the experiment, in particular for some surface complexation sorbing tracers, possibly due to iron-oxy-hydroxides formed on equipment surfaces. Quantification was made of the amount of sorption on the equipment in order to enable corrections in the evaluation procedures. The sorption occurring for ion-exchange sorbing tracers was concluded to predominately be an effect of interaction with the geologic material since the sorbed amount on the equipment was found to be insignificant. Natural pressure conditions were maintained throughout the experiment time and consequently penetration into the rock matrix must be considered as a result only of diffusion since no advection could have been involved. Modelling in order to determine sorption coefficients (K a , K d ) was performed using a homogeneous porosity sorption-diffusion model using fixed data for porosity and matrix diffusivity from laboratory investigations on LTDE-SD core materials. For the ion-exchange sorbing tracers, the in situ evaluated K d was in the range of the batch sorption results or near the highest values (fracture material) from the batch sorption results. This indicates that a sorption-diffusion model can describe the concentration losses reasonably well for the ion-exchange sorbing tracers. However, due to the sorption on equipment, one should treat these results with care and consider the analysis of the sampled rock material before any definitive conclusions can be made based on the actual penetration profiles of the rock

  20. Long Term Sorption Diffusion Experiment (LTDE-SD). Performance of main in situ experiment and results from water phase measurements

    Energy Technology Data Exchange (ETDEWEB)

    Widestrand, Henrik; Byegaard, Johan; Nilsson, Kersti; Hoeglund, Susanne; Gustafsson, Erik (Geosigma AB, Uppsala (Sweden)); Kronberg, Magnus (Swedish Nuclear Fuel and Waste Management Co. (Sweden))

    2010-12-15

    radionuclide sorption to colloids in the aqueous phase was of minor importance. Furthermore, the measurements performed after a general colloid filtration showed no significant concentrations of inorganic colloids. The natural redox conditions were difficult to maintain during the experiment. Therefore the experiment was performed under the oxidizing conditions (E{sub h} approx470 mV) that was obtained during the circulation of the groundwater. Sorption occurred on equipment during the experiment, in particular for some surface complexation sorbing tracers, possibly due to iron-oxy-hydroxides formed on equipment surfaces. Quantification was made of the amount of sorption on the equipment in order to enable corrections in the evaluation procedures. The sorption occurring for ion-exchange sorbing tracers was concluded to predominately be an effect of interaction with the geologic material since the sorbed amount on the equipment was found to be insignificant. Natural pressure conditions were maintained throughout the experiment time and consequently penetration into the rock matrix must be considered as a result only of diffusion since no advection could have been involved. Modelling in order to determine sorption coefficients (K{sub a}, K{sub d}) was performed using a homogeneous porosity sorption-diffusion model using fixed data for porosity and matrix diffusivity from laboratory investigations on LTDE-SD core materials. For the ion-exchange sorbing tracers, the in situ evaluated K{sub d} was in the range of the batch sorption results or near the highest values (fracture material) from the batch sorption results. This indicates that a sorption-diffusion model can describe the concentration losses reasonably well for the ion-exchange sorbing tracers. However, due to the sorption on equipment, one should treat these results with care and consider the analysis of the sampled rock material before any definitive conclusions can be made based on the actual penetration profiles of

  1. A brief review of measurements of electroweak bosons at the LHCb experiment in LHC Run 1

    CERN Document Server

    INSPIRE-00340962

    2016-09-15

    The LHCb experiment is one of four major experiments at the LHC. Despite being designed for the study of beauty and charm particles, it has made important contributions in other areas, such as the production and decay of $W$ and $Z$ bosons. Such measurements can be used to study and constrain parton distribution functions, as well as to test perturbative quantum chromodynamics in hard scattering processes. The angular structure of $Z$ boson decays to leptons can also be studied and used to measure the weak mixing angle. The phase space probed by LHCb is particularly sensitive to this quantity, and the LHCb measurement using the dimuon final state is currently the most precise determination of $\\sin^2\\theta^\\text{lept.}_\\text{eff.}$ at the LHC. LHCb measurements made using data collected during the first period of LHC operations (LHC Run 1) are discussed in this review. The article also considers the potential impact of related future measurements.

  2. Determining Motivators and Hygiene Factors among Excellent Teachers in Malaysia: An Experience of Confirmatory Factor Analysis

    Science.gov (United States)

    Amzat, Ismail Hussein; Don, Yahya; Fauzee, Sofian Omar; Hussin, Fauzi; Raman, Arumugam

    2017-01-01

    Purpose: In a world in which successful learning is believed to rest on the methods of teaching and the performance of students is determined by teacher quality, it is clear that teachers are the backbone of student learning attainments. In such a scenario, teacher development, welfare, motivation, and satisfaction are crucial for better teaching…

  3. Threat and Selective Exposure: The Moderating Role of Threat and Decision Context on Confirmatory Information Search after Decisions

    Science.gov (United States)

    Fischer, Peter; Kastenmuller, Andreas; Greitemeyer, Tobias; Fischer, Julia; Frey, Dieter; Crelley, David

    2011-01-01

    Previous studies on the impact of perceived threat on confirmatory information search (selective exposure) in the context of decision making have yielded mixed results. Some studies have suggested that confirmatory information search is reduced, yet others have found contradictory effects. The present series of 5 studies consistently found that…

  4. Ultrasonic thermometry system for measuring very high temperatures in reactor safety experiments

    International Nuclear Information System (INIS)

    Carlson, G.A.; Sullivan, W.H.; Plein, H.G.; Kerley, T.M.

    1979-06-01

    Ultrasonic thermometry has many potential applications in reactor safety experiments, where extremely high temperatures and lack of visual access may preclude the use of conventional diagnostics. This report details ultrasonic thermometry requirements for one such experiment, the molten fuel pool experiment. Sensors, transducers, and signal processing electronics are described in detail. Axial heat transfer in the sensors is modelled and found acceptably small. Measurement errors, calculations of their effect, and ways to minimize them are given. A rotating sensor concept is discussed which holds promise of alleviating sticking problems at high temperature. Applications of ultrasonic thermometry to three in-core experiments are described. In them, five 10-mm-length sensor elements were used to measure axial temperatures in a UO 2 or UO 2 -steel system fission-heated to about 2860 0 C

  5. ESCOMPTE experiment: intercomparison of four aircraft dynamical, thermodynamical, radiation and chemical measurements

    Science.gov (United States)

    Saïd, F.; Corsmeier, U.; Kalthoff, N.; Kottmeier, C.; Lothon, M.; Wieser, A.; Hofherr, T.; Perros, P.

    2005-03-01

    Among seven airplanes involved in the Experience sur Site pour COntraindre les Modèles de Pollution atmosphérique et de Transport d'Emission (ESCOMPTE) experiment in 2001, four measured classical meteorological parameters, radiation fluxes, trace gases and turbulence (for three among four): the Dornier 128 from the Institut für Meteorologie und Klimaforschung, the Fokker 27 ARAT from the Institut National des Sciences de l'Univers, the Merlin 4 and Piper Aztec 23 from Météo France. This paper presents the results of intercomparison flights between three pairs of aircraft. The results are very similar for mean parameters except for the horizontal wind measurements provided by the Merlin that showed a problem that is probably linked to the measurement of the aircraft velocity. Further investigation is required to know whether corrections are possible or not for these wind measurements. Turbulence is studied along two legs over a flat and homogeneous area: in spite of the heterogeneity of the measured functions (one leg is close to the top of the boundary layer), the comparison is rather good. The relative accuracy of the data provided to the data base is given. It easily allows to use the huge amount of aircraft data collected during the experiment with very few restrictions. We underline some points where efforts should be borne for future experiments: wind coupling between Inertial Navigation System data and Global Positioning System (GPS) data, CO and NO x measurements.

  6. Some notes on experiments measuring diffusion of sorbed nuclides through porous media

    International Nuclear Information System (INIS)

    Lever, D.A.

    1986-11-01

    Various experimental techniques for measuring the important parameters governing diffusion of sorbed nuclides through water-saturated porous media are described, and the particular parameters obtained from each technique are discussed. Recent experiments in which diffusive transport takes place more rapidly than expected are reviewed. The author recommends that through-transport diffusion experiments are the most satisfactory method of determining whether this arises from surface diffusion of sorbed nuclides. (author)

  7. First high-voltage measurements using Ca{sup +} ions at the ALIVE experiment

    Energy Technology Data Exchange (ETDEWEB)

    König, K., E-mail: kkoenig@ikp.tu-darmstadt.de [Technische Universität Darmstadt, Institut für Kernphysik (Germany); Geppert, Ch. [Universität Mainz, Institut für Kernchemie (Germany); Krämer, J.; Maaß, B. [Technische Universität Darmstadt, Institut für Kernphysik (Germany); Otten, E. W. [Universität Mainz, Institut für Physik (Germany); Ratajczyk, T.; Nörtershäuser, W. [Technische Universität Darmstadt, Institut für Kernphysik (Germany)

    2017-11-15

    Many physics experiments depend on accurate high-voltage measurements to determine for example the exact retardation potential of an electron spectrometer as in the KATRIN experiment or the acceleration voltage of the ions at ISOL facilities. Until now only precision high-voltage dividers can be used to measure voltages up to 65 kV with an accuracy of 1 ppm. However, these dividers need frequent calibration and cross-checking and the direct traceability is not given. In this article we will describe the status of an experiment which aims to measure high voltages using collinear laser spectroscopy and which has the potential to provide a high-voltage standard and hence, a calibration source for precision high-voltage dividers on the 1 ppm level.

  8. Measuring Patient Preferences: An Overview of Methods with a Focus on Discrete Choice Experiments.

    Science.gov (United States)

    Hazlewood, Glen S

    2018-05-01

    There is increasing recognition of the importance of patient preferences and methodologies to measure them. In this article, methods to quantify patient preferences are reviewed, with a focus on discrete choice experiments. In a discrete choice experiment, patients are asked to choose between 2 or more treatments. The results can be used to quantify the relative importance of treatment outcomes and/or other considerations relevant to medical decision making. Conducting and interpreting a discrete choice experiment requires multiple steps and an understanding of the potential biases that can arise, which we review in this article with examples in rheumatic diseases. Copyright © 2018 Elsevier Inc. All rights reserved.

  9. An experiment for Shuttle aerodynamic force coefficient determination from inflight dynamical and atmospheric measurements

    Science.gov (United States)

    Compton, H. R.; Blanchard, R. C.; Walberg, G. D.

    1978-01-01

    A two-phase experiment is proposed which utilizes the Shuttle Orbiter and its unique series of repeated entries into the earth's atmosphere as an airborne in situ aerodynamic testing laboratory. The objective of the experiment is to determine static aerodynamic force coefficients, first of the orbiter, and later of various entry configurations throughout the high speed flight regime, including the transition from free molecule to continuum fluid flow. The objective will be accomplished through analysis of inflight measurements from both shuttle-borne and shuttle-launched instrumented packages. Results are presented to demonstrate the feasibility of such an experiment.

  10. Measurements of very forward particles production spectra at LHC: the LHCf experiment

    CERN Document Server

    Berti, Eugenio; Bonechi, Lorenzo; Bongi, Massimo; Castellini, Guido; D'Alessandro, Raffaello; Haguenauer, Maurice; Itow, Yoshitaka; Iwata, Taiki; Kasahara, Katsuaki; Makino, Yuya; Masuda, Kimiaki; Matsubayashi, Eri; Menjo, Hiroaki; Muraki, Yasushi; Papini, Paolo; Ricciarini, Sergio; Sako, Takashi; Suzuki, Takuya; Tamura, Tadahisa; Tiberio, Alessio; Torii, Shoji; Tricomi, Alessia; Turner, W C; Ueno, Mana; Zhou, Qi Dong

    2017-01-01

    Thanks to two small sampling calorimeters installed in the LHC tunnel at ±140 m from IP1, the LHC forward (LHCf) experiment is able to detect neutral particles produced by high energy proton-ion collisions in the very forward region (pseudo-rapidity η > 8.4). The main aim of LHCf is to provide precise measurements of the production spectra relative to these particles, in order to tune hadronic interaction models used by ground-based cosmic rays experiments. In this paper we will present the current status of the LHCf experiment, regarding in particular collected data and analysis results, as well as future prospects

  11. Measuring the Interest of German Students in Agriculture: the Role of Knowledge, Nature Experience, Disgust, and Gender

    Science.gov (United States)

    Bickel, Malte; Strack, Micha; Bögeholz, Susanne

    2015-06-01

    Modern knowledge-based societies, especially their younger members, have largely lost their bonds to farming. However, learning about agriculture and its interrelations with environmental issues may be facilitated by students' individual interests in agriculture. To date, an adequate instrument to investigate agricultural interests has been lacking. Research has infrequently considered students' interest in agricultural content areas as well as influencing factors on students' agricultural interests. In this study, a factorial design of agricultural interests was developed combining five agricultural content areas and four components of individual interest. The instrument was validated with German fifth and sixth graders ( N = 1,085) using a variance decomposition confirmatory factor analysis model. The results demonstrated a second-order factor of general agricultural interest, with animal husbandry, arable farming, vegetable and fruit cropping, primary food processing, and agricultural engineering as discrete content areas of agricultural interest. Multiple regression analyses demonstrated that prior knowledge, garden experience, and disgust sensitivity are predictors of general agricultural interest. In addition, gender influenced interest in four of the five agricultural content areas. Implications are directed at researchers, teachers, and environmental educators concerning how to trigger and develop pupils' agricultural interests.

  12. On the possibility of measuring the Earth's gravitomagnetic force in a new laboratory experiment

    International Nuclear Information System (INIS)

    Iorio, Lorenzo

    2003-01-01

    In this letter we propose, in a preliminary way, a new Earth-based laboratory experiment aimed at the detection of the gravitomagnetic field of the Earth. It consists of the measurement of the difference between the circular frequencies of two rotators moving along identical circular paths, but in opposite directions, on a horizontal friction-free plane in a vacuum chamber placed at the South Pole. The accuracy to our knowledge of the Earth's rotation from VLBI and the possibility of measuring the rotators' periods over many revolutions should allow for the feasibility of the proposed experiment. (letter to the editor)

  13. Strategic B2B customer experience management: the importance of outcomes-based measures

    OpenAIRE

    Zolkiewski, Judy; Story, Victoria; Burton, Jamie; Chan, Paul; Gomes, Andre; Hunter-Jones, Philippa; O’Malley, Lisa; Peters, Linda D.; Raddats, Chris; Robinson, William

    2017-01-01

    Purpose\\ud \\ud The purpose of this paper is to critique the adequacy of efforts to capture the complexities of customer experience in a business-to-business (B2B) context using input–output measures. The paper introduces a strategic customer experience management framework to capture the complexity of B2B service interactions and discusses the value of outcomes-based measurement.\\ud Design/methodology/approach\\ud \\ud This is a theoretical paper that reviews extant literature related to B2B cu...

  14. On-site underground background measurements for the KASKA reactor-neutrino experiment

    International Nuclear Information System (INIS)

    Furuta, H.; Sakuma, K.; Aoki, M.; Fukuda, Y.; Funaki, Y.; Hara, T.; Haruna, T.; Ishihara, N.; Katsumata, M.; Kawasaki, T.; Kuze, M.; Maeda, J.; Matsubara, T.; Matsumoto, T.; Miyata, H.; Nagasaka, Y.; Nakagawa, T.; Nakajima, N.; Nitta, K.; Sakai, K.; Sakamoto, Y.; Suekane, F.; Sumiyoshi, T.; Tabata, H.; Tamura, N.; Tsuchiya, Y.

    2006-01-01

    On-site underground background measurements were performed for the planned reactor-neutrino oscillation experiment KASKA at Kashiwazaki-Kariwa nuclear power station in Niigata, Japan. A small-diameter boring hole was excavated down to 70m underground level, and a detector unit for γ-ray and cosmic-muon measurements was placed at various depths to take data. The data were analyzed to obtain abundance of natural radioactive elements in the surrounding soil and rates of cosmic muons that penetrate the overburden. The results will be reflected in the design of the KASKA experiment

  15. Experience acquired with the realisation of a geotechnical measurement campaign in a deep clay formation

    International Nuclear Information System (INIS)

    Manfroy, P.; Neerdael, B.; Buyens, M.

    1985-01-01

    Belgium has selected clay as a possible disposal medium for conditioned radioactive waste. CEN/SCK has launched an important research and development programme to evaluate the disposal potential of the Boom clay formation present under the nuclear site Mol-Dessel. An underground facility has been built at 220 m. depth in order to proceed to geomechanical, corrosion, migration and heat transfer experiments. During its construction numerous geotechnical measuring instruments were emplaced on the lining and in the clay medium. Successful realization of such measurement campaigns was hampered by the very difficult underground working conditions. This paper describes what can be learned from the experience gained so far. 5 refs.; 5 figs

  16. Análise factorial confirmatória do TEOSQp Confirmatory factorial analysis of TEOSQp

    Directory of Open Access Journals (Sweden)

    Helder M. Fernandes

    2010-04-01

    Full Text Available O propósito do presente estudo foi avaliar a confiabilidade, a validade factorial e a invariância (por sexo da versão portuguesa do TEOSQ (Fonseca & Biddle, 2001. Integraram a amostra 1010 estudantes com uma média de idade de 15,42 anos. A análise factorial e da invariância foi avaliada através da análise factorial confirmatória. Os resultados corroboram a proposta de uma estrutura de duas subescalas (tarefa e ego. Com base nos índices de modificação e justificação teórica, o TEOSQ p foi reduzido a 12-itens, com melhores índices de adequação para o modelo oblíquo. Os resultados relativos à invariância por sexo não apresentaram apoio empírico total para a assumpção de equivalência multi-grupo, sugerindo que o TEOSQ p não parece avaliar as orientações cognitivas do mesmo modo, para os indivíduos do sexo masculino (modelo ortogonal e feminino (modelo oblíquo. Face aos resultados obtidos, foram discutidas as implicações conceptuais, empíricas, assim como os aspectos de carácter aplicado.The present research assessed the reliability, factorial validity and measurement invariance (by gender of the Portuguese version of TEOSQ -Task and Ego Orientation in Sport Questionnaire (Fonseca & Biddle, 2001. Data were collected from 1010 physical education students with a mean age of 15.42 ( SD=1.91. Factorial and invariance measurements were tested via confirmatory factorial analysis. Results supported internal consistency for the two proposed subscales (task and ego. Based on modification indices and theoretical justification the TEOSQ p was reduced to 12 items with better goodness-of-fit indices for the oblique model. The results of gender invariance did not provide full empirical support to the multi-group equivalence assumption, being suggested that TEOSQ p does not measure in the same way goal orientations for boys (orthogonal model and girls (oblique model. In light of these results, conceptual, empirical and practical

  17. Liner velocity, current, and symmetry measurements on the 32 MA flux compression generator experiment ALT-1

    CERN Document Server

    Clark, D A; Rodríguez, G; Tabaka, L J

    2001-01-01

    Summary form only given, as follows. A flux compression generator based pulse power system, designed, built, and fielded by a Russian team at the All Russian Scientific Research Institute of Experimental Physics (VNIIEF), was used to successfully drive an aluminum liner to velocities greater than 10 km/sec. The experiment objective was to demonstrate performance of a precision liner implosion at Atlas current of 30 MA or greater. Diagnostics to measure liner performance were an essential part of the experiment. An experimental team from Los Alamos National Laboratory (LANL) provided a suite of diagnostics to measure liner performance. Three diagnostics were fielded. 1. a velocity interferometer (VISAR) to continuously measure the liner inner surface velocity from throughout the entire range of travel. 2. Two Faraday rotation devices to measure liner current during the implosion. 3. Sixteen fiber optic impact pins to record liner impact time and provide axial and azimuthal symmetry information. All diagnostics...

  18. Using High-Fidelity Computational Fluid Dynamics to Help Design a Wind Turbine Wake Measurement Experiment

    International Nuclear Information System (INIS)

    Churchfield, M; Wang, Q; Scholbrock, A; Herges, T; Mikkelsen, T; Sjöholm, M

    2016-01-01

    We describe the process of using large-eddy simulations of wind turbine wake flow to help design a wake measurement campaign. The main goal of the experiment is to measure wakes and wake deflection that result from intentional yaw misalignment under a variety of atmospheric conditions at the Scaled Wind Farm Technology facility operated by Sandia National Laboratories in Lubbock, Texas. Prior simulation studies have shown that wake deflection may be used for wind-plant control that maximizes plant power output. In this study, simulations are performed to characterize wake deflection and general behavior before the experiment is performed to ensure better upfront planning. Beyond characterizing the expected wake behavior, we also use the large-eddy simulation to test a virtual version of the lidar we plan to use to measure the wake and better understand our lidar scan strategy options. This work is an excellent example of a “simulation-in-the-loop” measurement campaign. (paper)

  19. Psychometric properties of the revised Malay version Medical Outcome Study Social Support Survey using confirmatory factor analysis among postpartum mothers.

    Science.gov (United States)

    Norhayati, Mohd Noor; Aniza, Abd Aziz; Nik Hazlina, Nik Hussain; Azman, Mohd Yacob

    2015-12-01

    Social support is an essential component for the physical and emotional well-being of postpartum mothers. The objective of this study is to determine the psychometric properties of the revised Malay version Medical Outcome Study (MOS) Social Support Survey using a confirmatory validity approach. A cross-sectional study was conducted involving 144 postpartum mothers attending Obstetric and Gynecology Clinic, Universiti Sains Malaysia Hospital. Construct validity and internal consistency assessment was performed after the translation, content validity and face validity process. The data were analyzed using SPSS 20.0 (SPSS Inc., Chicago, IL, USA) and AMOS 20.0 (SPSS Inc., Chicago, IL, USA). The original questionnaire consists of four domains (emotional/informational support, tangible support, affectionate support and positive social interaction) and 19 items. Affectionate support domain with three items only was treated as a separate construct and was not included in the factor analysis. The final confirmatory model with three constructs and 13 items demonstrated acceptable factor loadings, domain to domain correlation and best fit; (χ2[df]=1.665 [61]; P-value=0.001; Tucker-Lewis Index=0.944; comparative fit index=0.956; root mean square error of approximation=0.068). Composite reliability, average variance extracted and Cronbach's α of the domains ranged from 0.649 to 0.903; 0.390 to 0.699; 0.616 to 0.902, respectively. The study suggested that the four-factor model with 16 items (including one separate factor of affectionate) of the revised Malay version MOS Social Support Survey was acceptable to be used to measure social support after childbirth because it is valid, reliable and simple. © 2015 Wiley Publishing Asia Pty Ltd.

  20. A confirmatory factor analysis of the metabolic syndrome in adolescents: an examination of sex and racial/ethnic differences

    Directory of Open Access Journals (Sweden)

    Gurka Matthew J

    2012-10-01

    Full Text Available Abstract Objective The metabolic syndrome (MetS is a cluster of clinical indices that signals increased risk for cardiovascular disease and Type 2 diabetes. The diagnosis of MetS is typically based on cut-off points for various components, e.g. waist circumference and blood pressure. Because current MetS criteria result in racial/ethnic discrepancies, our goal was to use confirmatory factor analysis to delineate differential contributions to MetS by sub-group. Research Design and Methods Using 1999–2010 data from the National Health and Nutrition Examination Survey (NHANES, we performed a confirmatory factor analysis of a single MetS factor that allowed differential loadings across sex and race/ethnicity, resulting in a continuous MetS risk score that is sex and race/ethnicity-specific. Results Loadings to the MetS score differed by racial/ethnic and gender subgroup with respect to triglycerides and HDL-cholesterol. ROC-curve analysis revealed high area-under-the-curve concordance with MetS by traditional criteria (0.96, and with elevations in MetS-associated risk markers, including high-sensitivity C-reactive protein (0.71, uric acid (0.75 and fasting insulin (0.82. Using a cut off for this score derived from ROC-curve analysis, the MetS risk score exhibited increased sensitivity for predicting elevations in ≥2 of these risk markers as compared with traditional pediatric MetS criteria. Conclusions The equations from this sex- and race/ethnicity-specific analysis provide a clinically-accessible and interpretable continuous measure of MetS that can be used to identify children at higher risk for developing adult diseases related to MetS, who could then be targeted for intervention. These equations also provide a powerful new outcome for use in childhood obesity and MetS research.

  1. Bone mineral measurement, experiment M078. [space flight effects on human bone composition

    Science.gov (United States)

    Rambaut, P. C.; Vogel, J. M.; Ullmann, J.; Brown, S.; Kolb, F., III

    1973-01-01

    Measurement tests revealed few deviations from baseline bone mineral measurements after 56 days in a Skylab-type environment. No mineral change was observed in the right radius. One individual, however, showed a possible mineral loss in the left os calcis and another gained mineral in the right ulna. The cause of the gain is unclear but may be attributable to the heavy exercise routines engaged in by the crewmember in question. Equipment problems were identified during the experiment and rectified.

  2. Single particle measurements and two particle interferometry results from CERN experiment NA44

    International Nuclear Information System (INIS)

    Simon-Gillo, J.

    1994-01-01

    CERN experiment NA44 is optimized for the study of identified single and multiple particle distributions to p T = 0 near mid-rapidity. We measure π +- , K +- , p, bar p, d and bar d, in p + A and A + A collisions at 450 and 20OGeV/u, respectively. Two-particle intensity interferometry results from π + π + , K + K + , and K - K - measurements and single particle distributions are presented

  3. Poloidal magnetic field profile measurements on the microwave tokamak experiment using far-infrared polarimetry

    International Nuclear Information System (INIS)

    Rice, B.W.

    1992-09-01

    The measurement of plasma poloidal magnetic field (B) profiles in tokamaks with good temporal and spatial resolution has proven to be a difficult but important measurement. A large range of toroidal confinement phenomena is expected to depend sensitively on the radial variation of B including the tearing instability, sawtooth oscillations, disruptions, and transport. Experimental confirmation of theoretical models describing these phenomena has been hampered by the lack of detailed B measurements. A fifteen chord far-infrared (FIR) polarimeter has been developed to measure B in the Microwave Tokamak, Experiment (MTX). Polarimetry utilizes the well known Faraday rotation effect, which causes a rotation of the polarization of an FIR beam propagating in the poloidal plane. The rotation angle is proportional to the component of B parallel to the beam. A new technique for determining the Faraday rotation angle is introduced, based on phase measurements of a rotating polarization ellipse. This instrument has been used successfully to measure B profiles for a wide range of experiments on MTX. For ohmic discharges, measurements of the safety factor on axis give q 0 ∼ 0.75 during sawteeth and q 0 > 1 without sawteeth. Large perturbations to the polarimeter signals correlated with the sawtooth crash are observed during some discharges. Measurements in discharges with electron cyclotron heating (ECH) show a transition from a hollow to peaked J profile that is triggered by the ECH pulse. Current-ramp experiments were done to perturb the J profile from the nominal Spitzer conductivity profile. Profiles for initial current ramps and ramps starting from a stable equilibrium have been measured and are compared with a cylindrical diffusion model. Finally, the tearing mode stability equation is solved using measured J profiles. Stability predictions are in good agreement with the existence of oscillations observed on the magnetic loops

  4. Neutrino velocity measurement with the OPERA experiment in the CNGS beam

    International Nuclear Information System (INIS)

    Brunetti, G.

    2011-05-01

    The thesis concerns the measurement of the neutrino velocity with the OPERA experiment in the CNGS beam. There are different theoretical models that allow for Lorentz violating effects which can be investigated with measurements on terrestrial neutrino beams. The MINOS experiment published in 2007 a measure on the muon neutrinos over a distance of 730 km finding a deviation with respect to the expected time of flight of 126 ns with a statistical error of 32 ns and a systematic error of 64 ns. The OPERA experiment observes as well muon neutrinos 730 km away from the source, with a sensitivity significantly better than MINOS thanks to the higher number of interactions in the detector due to the higher energy beam and the much more sophisticated timing system explicitly upgraded in view of the neutrino velocity measurement. This system is composed by atomic cesium clocks and GPS receivers operating in 'common view mode'. Thanks to this system a time-transfer between the two sites with a precision at the level of 1 ns is possible. Moreover, a Fast Waveform Digitizer was installed along the proton beam line at CERN in order to measure the internal time structure of the proton pulses that are sent to the CNGS target. The result on the neutrino velocity is the most precise measurement so far with terrestrial neutrino beams: the neutrino time of flight was determined with a statistical uncertainty of about 10 ns and a systematic uncertainty smaller than 20 nano-seconds. (author)

  5. The error model and experiment of measuring angular position error based on laser collimation

    Science.gov (United States)

    Cai, Yangyang; Yang, Jing; Li, Jiakun; Feng, Qibo

    2018-01-01

    Rotary axis is the reference component of rotation motion. Angular position error is the most critical factor which impair the machining precision among the six degree-of-freedom (DOF) geometric errors of rotary axis. In this paper, the measuring method of angular position error of rotary axis based on laser collimation is thoroughly researched, the error model is established and 360 ° full range measurement is realized by using the high precision servo turntable. The change of space attitude of each moving part is described accurately by the 3×3 transformation matrices and the influences of various factors on the measurement results is analyzed in detail. Experiments results show that the measurement method can achieve high measurement accuracy and large measurement range.

  6. Theoretical considerations and preparatory experiments for poloidal field measurements in tokamaks by far-infrared polarimetry

    Energy Technology Data Exchange (ETDEWEB)

    Kunz, W; Dodel, G [Stuttgart Univ. (TH) (Germany, F.R.). Inst. fuer Plasmaforschung

    1978-12-01

    Numerical calculations give an optimum wavelength and show the precision requirements for determining poloidal field profiles in tokamaks on the basis of the Faraday effect. The required precision of the polarimetric measurements can be achieved in the far-infrared as is verified in a model experiment using a ferrite modulated HCN laser beam.

  7. Image analysis to measure sorting and stratification applied to sand-gravel experiments

    NARCIS (Netherlands)

    Orrú, C.

    2016-01-01

    The main objective of this project is to develop new measuring techniques for providing detailed data on sediment sorting suitable for sand-gravel laboratory experiments. Such data will be of aid in obtaining new insights on sorting mechanisms and improving prediction capabilities of morphodynamic

  8. Danish Experiences with Deposit Probe Measurements in Grate and Pulverized Fuel Biomass Power Boilers

    DEFF Research Database (Denmark)

    Hansen, Stine Broholm; Jensen, Peter Arendt; Jappe Frandsen, Flemming

    2012-01-01

    Several measuring campaigns with focus on deposition behavior have been conducted at full-scale power plants firing biomass in Denmark. These campaigns have been reviewed in this work. The focus is the obtained experiences on deposit formation, shedding and chemistry. When comparing results from...

  9. Moisture Distribution in Broccoli: Measurements by MRI Hot Air Drying Experiments

    NARCIS (Netherlands)

    Jin, X.; Sman, van der R.G.M.; Gerkema, E.; Vergeldt, F.J.; As, van H.; Boxtel, van A.J.B.

    2011-01-01

    ABSTRACT The internal moisture distribution that arise in food products during drying, is a key factor for the retention of quality attributes. To reveal the course of moisture content in a product, internal moisture profiles in broccoli florets are measured by MRI imaging during drying experiments

  10. Moisture distribution in broccoli: measurements by MRI hot air drying experiments

    NARCIS (Netherlands)

    Jin, X.; Sman, van der R.G.M.; Gerkema, E.; Vergeldt, F.J.; As, van H.; Boxtel, van A.J.B.

    2011-01-01

    The internal moisture distribution that arise in food products during drying, is a key factor for the retention of quality attributes. To reveal the course of moisture content in a product, internal moisture profiles in broccoli florets are measured by MRI imaging during drying experiments with

  11. Using Conductivity Measurements to Determine the Identities and Concentrations of Unknown Acids: An Inquiry Laboratory Experiment

    Science.gov (United States)

    Smith, K. Christopher; Garza, Ariana

    2015-01-01

    This paper describes a student designed experiment using titrations involving conductivity measurements to identify unknown acids as being either HCl or H[subscript 2]SO[subscript 4], and to determine the concentrations of the acids, thereby improving the utility of standard acid-base titrations. Using an inquiry context, students gain experience…

  12. A note on acoustic measurements of turbulence, suspended sediment, and bed forms in mobile bed experiments

    Science.gov (United States)

    One of the challenges of hydraulic experimentation is designing experiments that are complex enough to capture relevant processes while retaining the simplicity necessary for useful, accurate measurements. The intricacy of the interactions between turbulent flows and mobile beds in rivers and stream...

  13. Report on RUNE’s coastal experiment and first inter-comparisons between measurements systems

    DEFF Research Database (Denmark)

    Floors, Rogier Ralph; Lea, Guillaume; Pena Diaz, Alfredo

    Accurate description of the wind energy resource in the coastal zone is crucial for countries developing near-shore wind farms. The RUNE experiment aims to use lidar measurements and mesoscale modelling to study the behaviour of the flow in the coastal zone and find the most effective way...

  14. An Undergraduate Experiment for the Measurement of the Speed of Sound in Air: Phenomena and Discussion

    Science.gov (United States)

    Yang, Hujiang; Zhao, Xiaohong; Wang, Xin; Xiao, Jinghua

    2012-01-01

    In this paper, we present and discuss some phenomena in an undergraduate experiment for the measurement of the speed of sound in air. A square wave distorts when connected to a piezoelectric transducer. Moreover, the amplitude of the receiving signal varies with the driving frequency. Comparing with the Gibbs phenomenon, these phenomena can be…

  15. Recent updates on the Standard Model Higgs boson measurements from the ATLAS and CMS experiments

    CERN Document Server

    Wang, Song-Ming

    2017-01-01

    This report presents the latest results from the ATLAS and CMS experiments on the measurements of the Standard Model Higgs boson by using the proton-proton collisions produced by the Large Hadron Collider during the first two years of Run 2 data taking.

  16. An experiment to measure the one-way velocity of propagation of electromagnetic radiation

    Science.gov (United States)

    Kolen, P.; Torr, D. G.

    1982-01-01

    An experiment involving commercially available instrumentation to measure the velocity of the earth with respect to absolute space is described. The experiment involves the measurement of the one-way propagation velocity of electromagnetic radiation down a high-quality coaxial cable. It is demonstrated that the experiment is both physically meaningful and exceedingly simple in concept and in implementation. It is shown that with currently available commercial equipment one might expect to detect a threshold value for the component of velocity of the earth's motion with respect to absolute space in the equatorial plane of approximately 10 km/s, which greatly exceeds the velocity resolution required to detect the motion of the solar system with respect to the center of the galaxy.

  17. Measurement of the neutrino mixing angle θ13 with the Double Chooz experiment

    Science.gov (United States)

    Ostrovskiy, Igor

    2009-10-01

    The neutrino mixing angle θ13 is last one which value is still unknown. Measuring the θ13 is important for completing our understanding of three flavor neutrino oscillations. Moreover, leptonic CP violation could only be measured in case the value of θ13 is not zero. The current best limit (^2(2θ13)Ardennes. Described in this talk, is another experiment, Double Chooz, that is being prepared at the same site. The Double Chooz experiment offers several fundamental improvements and is aiming to surpass the current limit by an order of magnitude (^2(2θ13) < 0.03). Details of the detector design, overview of systematic errors and expected sensitivity, as well as current status of the experiment are presented.

  18. Measurement of the ambient organic aerosol volatility distribution: application during the Finokalia Aerosol Measurement Experiment (FAME-2008

    Directory of Open Access Journals (Sweden)

    B. H. Lee

    2010-12-01

    Full Text Available A variable residence time thermodenuder (TD was combined with an Aerodyne Aerosol Mass Spectrometer (AMS and a Scanning Mobility Particle Sizer (SMPS to measure the volatility distribution of aged organic aerosol in the Eastern Mediterranean during the Finokalia Aerosol Measurement Experiment in May of 2008 (FAME-2008. A new method for the quantification of the organic aerosol volatility distribution was developed combining measurements of all three instruments together with an aerosol dynamics model.

    Challenges in the interpretation of ambient thermodenuder-AMS measurements include the potential resistances to mass transfer during particle evaporation, the effects of particle size on the evaporated mass fraction, the changes in the AMS collection efficiency and particle density as the particles evaporate partially in the TD, and finally potential losses inside the TD. Our proposed measurement and data analysis method accounts for all of these problems combining the AMS and SMPS measurements.

    The AMS collection efficiency of the aerosol that passed through the TD was found to be approximately 10% lower than the collection efficiency of the aerosol that passed through the bypass. The organic aerosol measured at Finokalia is approximately 2 or more orders of magnitude less volatile than fresh laboratory-generated monoterpene (α-pinene, β-pinene and limonene under low NOx conditions secondary organic aerosol. This low volatility is consistent with its highly oxygenated AMS mass spectrum. The results are found to be highly sensitive to the mass accommodation coefficient of the evaporating species. This analysis is based on the assumption that there were no significant reactions taking place inside the thermodenuder.

  19. How to measure experiences of healthcare quality in Denmark among patients with heart disease? The development and psychometric evaluation of a patient-reported instrument

    DEFF Research Database (Denmark)

    Zinckernagel, Line; Schneekloth, Nanna; Zwisler, Ann Dorthe Olsen

    2017-01-01

    Objective Measuring the quality of care as experienced by patients is increasingly recognised as a way of improving healthcare services. However, disease-specific measures that take the patient journey into account are needed. This paper presents the development of such a measure for patients...... with heart disease and details the psychometric evaluation. Design The questionnaire was developed based on a literature review, qualitative interviews and a pilot-test. The psychometric evaluation of the measure was assessed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA......), Cronbach's alpha coefficient and differential item functioning analysis with data from a population-based survey. Setting Denmark in 2013-2014. Study participants Nineteen heart patients, four relatives and eight health professionals participated in qualitative interviews in the development phase, and 15...

  20. Experiences of mental illness stigma, prejudice and discrimination: a review of measures

    Directory of Open Access Journals (Sweden)

    Clement Sarah

    2010-03-01

    Full Text Available Abstract Background There has been a substantial increase in research on mental illness related stigma over the past 10 years, with many measures in use. This study aims to review current practice in the survey measurement of mental illness stigma, prejudice and discrimination experienced by people who have personal experience of mental illness. We will identify measures used, their characteristics and psychometric properties. Method A narrative literature review of survey measures of mental illness stigma was conducted. The databases Medline, PsychInfo and the British Nursing Index were searched for the period 1990-2009. Results 57 studies were included in the review. 14 survey measures of mental illness stigma were identified. Seven of the located measures addressed aspects of perceived stigma, 10 aspects of experienced stigma and 5 aspects of self-stigma. Of the identified studies, 79% used one of the measures of perceived stigma, 46% one of the measures of experienced stigma and 33% one of the measures of self-stigma. All measures presented some information on psychometric properties. Conclusions The review was structured by considering perceived, experienced and self stigma as separate but related constructs. It provides a resource to aid researchers in selecting the measure of mental illness stigma which is most appropriate to their purpose.

  1. Photon detector for high energy measurements in the SELEX spectrometer (Fermilab experiment E781)

    International Nuclear Information System (INIS)

    Goncharenko, Yu.M.; Grachov, O.A.; Kurshetsov, V.F.; Landsberg, L.G.; Nurushev, S.B.; Vasil'ev, A.N.

    1995-01-01

    A possibility to use one- or two-photon lead glass detectors for high energy measurements in the SELEX spectrometer with E γ up to 500 GeV is studied. It is shown that a single photon detector equipped with radiation-resistant lead glass counters is applicable for the experiment discussed. It is concluded that for the best energy resolution in the case of Primakoff effect like π - = γ * → π - + γ the combined method would be used with weighted combination of direct E γ measurement in the Photon-3 detector and the π - beam energy precise measurement. 11 refs., 4 tabs., 17 figs

  2. Organizational and market influences on physician performance on patient experience measures.

    Science.gov (United States)

    Rodriguez, Hector P; von Glahn, Ted; Rogers, William H; Safran, Dana Gelb

    2009-06-01

    To examine the extent to which medical group and market factors are related to individual primary care physician (PCP) performance on patient experience measures. This study employs Clinician and Group CAHPS survey data (n=105,663) from 2,099 adult PCPs belonging to 34 diverse medical groups across California. Medical group directors were interviewed to assess the magnitude and nature of financial incentives directed at individual physicians and the adoption of patient experience improvement strategies. Primary care services area (PCSA) data were used to characterize the market environment of physician practices. We used multilevel models to estimate the relationship between medical group and market factors and physician performance on each Clinician and Group CAHPS measure. Models statistically controlled for respondent characteristics and accounted for the clustering of respondents within physicians, physicians within medical groups, and medical groups within PCSAs using random effects. Compared with physicians belonging to independent practice associations, physicians belonging to integrated medical groups had better performance on the communication ( p=.007) and care coordination ( p=.03) measures. Physicians belonging to medical groups with greater numbers of PCPs had better performance on all measures. The use of patient experience improvement strategies was not associated with performance. Greater emphasis on productivity and efficiency criteria in individual physician financial incentive formulae was associated with worse access to care ( p=.04). Physicians located in PCSAs with higher area-level deprivation had worse performance on the access to care ( p=.04) and care coordination ( pintegrated medical groups and groups with greater numbers of PCPs performed better on several patient experience measures, suggesting that organized care processes adopted by these groups may enhance patients' experiences. Physicians practicing in markets with high

  3. Measuring medicine-related experiences from the patient perspective: a systematic review.

    Science.gov (United States)

    Katusiime, Barbra; Corlett, Sarah; Reeve, Joanne; Krska, Janet

    2016-01-01

    There is an increasing drive to measure and so improve patients' experiences and outcomes of health care. This also applies to medicines, given their ubiquity as health care interventions. Patients' experiences of using medicines vary, and instruments which measure these are seen as an essential component to improve care. We aimed to identify generic measures of patients' experiences of using prescription medicines and to examine their properties and suitability for use in research or practice. Multiple electronic databases were searched: MEDLINE, Embase, PsycINFO, PsycARTICLES, CINHAL Plus, PROQOLID ® , and Google Scholar. We identified, critically appraised, and summarized generic questionnaires assessing one or more aspects of the medicine use experience among adult patients using prescription medicines for chronic conditions, and the process of questionnaire development, degree of patient involvement, and/or validation processes. Fifteen questionnaires were included. Of these, nine measures were multidimensional, covering various aspects of medicine use. Six instruments covered only a single domain, assessing a specific facet of using medicines. Domains covered were the following: effectiveness; convenience, practicalities, and/or managing medicines; information, knowledge, and/or understanding; side effects; relationships and/or communication with health professionals; impact on daily living and/or social life; general satisfaction; attitudes; beliefs, concerns, and/or perceptions; medical follow-up and/or adherence-related issues; treatment- and/or medicine-related burden, perceived control, or autonomy; self-confidence about medicine use; availability and accessibility; and medicine-related quality of life. None of the identified questionnaires covered all domains. Instruments varied in the extent of patient involvement in both their development and validation. There is a scarcity of psychometrically sound, comprehensive, and generic measures of experiences

  4. Measuring Patients' Experience of Rehabilitation Services Across the Care Continuum. Part II: Key Dimensions.

    Science.gov (United States)

    McMurray, Josephine; McNeil, Heather; Lafortune, Claire; Black, Samantha; Prorok, Jeanette; Stolee, Paul

    2016-01-01

    To identify key dimensions of patients' experience across the rehabilitative care system and to recommend a framework to develop survey items that measure the rehabilitative care experience. Data were sourced from a literature review that searched MEDLINE (PubMed), CINAHL (Ebsco), and PsycINFO (APA PsycNET) databases from 2004 to 2014, the reference lists of the final accepted articles, and hand searches of relevant journals. Four reviewers performed the screening process on 2472 articles; 33 were included for analysis. Interrater reliability was confirmed through 2 rounds of title review and 1 round of abstract review, with an average κ score of .69. The final sample of 33 accepted articles was imported into a qualitative data analysis software application. Multiple levels of coding and a constant comparative methodology generated 6 themes. There were 502 discreet survey questions measuring patient experience that were categorized using the following dimensions: rehabilitative care ecosystem, client and informal caregiver engagement, patient and health care provider relation, pain and functional status, group and individual identity, and open ended. The most common survey questions examine the care delivery ecosystem (37%), the engagement of clients and their informal caregivers (24.9%), and the quality of relations between providers and patients (21.7%). Examination of patient's functional status and management of pain yielded (15.3%) of the instruments' questions. Currently available instruments and questions that measure patients' experience in rehabilitative care are unable to assess the performance of rehabilitative delivery systems that aspire to integrate care across the continuum. However, question panels derived from our 6 key themes may measure the key concepts that define rehabilitative care and facilitate measurement of patient experience at the system level. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc

  5. SQUIDs as detectors in a new experiment to measure the neutron electric dipole moment

    International Nuclear Information System (INIS)

    Espy, M.A.; Cooper, M.; Lamoreaux, S.; Kraus, R.H. Jr.; Matlachov, A.; Ruminer, P.

    1998-01-01

    A new experiment has been proposed at Los Alamos National Laboratory to measure the neutron electric dipole moment (EDM) to 4x10 -28 ecm, a factor of 250 times better than the current experimental limit. Such a measure of the neutron EDM would challenge the theories of supersymmetry and time reversal violation as the origin of the observed cosmological asymmetry in the ratio of baryons to antibaryons. One possible design for this new experiment includes the use of LTC SQUIDs coupled to large (∼100 cm 2 ) pick-up coils to measure the precision frequency of the spin-polarized 3 He atoms that act as polarizer, spin analyzer, detector, and magnetometer for the ultra-cold neutrons used in the experiment. The method of directly measuring the 3 He precession signal eliminates the need for very uniform magnetic fields (a major source of systematic error in these types of experiments). It is estimated that a flux of ∼2x10 -16 Tm 2 (0.1 Φ 0 ) will be coupled into the pick-up coils. To achieve the required signal-to-noise ratio one must have a flux resolution of dΦ SQ = 2x10 -6 Φ 0 /√Hz at 10 Hz. While this is close to the sensitivity available in commercial devices, the effects of coupling to such a large pick-up coil and flux noise from other sources in the experiment still need to be understood. To determine the feasibility of using SQUIDs in such an application the authors designed and built a superconducting test cell, which simulates major features of the proposed EDM experiment, and they developed a two-SQUID readout system that will reduce SQUID noise in the experiment. They present an overview of the EDM experiment with SQUIDs, estimations of required SQUID parameters and experimental considerations. The authors also present the measured performance of a single magnetometer in the test cell as well as the performance of the two SQUID readout technique

  6. Confirmatory Factor Analysis of the Delirium Rating Scale Revised-98 (DRS-R98).

    Science.gov (United States)

    Thurber, Steven; Kishi, Yasuhiro; Trzepacz, Paula T; Franco, Jose G; Meagher, David J; Lee, Yanghyun; Kim, Jeong-Lan; Furlanetto, Leticia M; Negreiros, Daniel; Huang, Ming-Chyi; Chen, Chun-Hsin; Kean, Jacob; Leonard, Maeve

    2015-01-01

    Principal components analysis applied to the Delirium Rating Scale-Revised-98 contributes to understanding the delirium construct. Using a multisite pooled international delirium database, the authors applied confirmatory factor analysis to Delirium Rating Scale-Revised-98 scores from 859 adult patients evaluated by delirium experts (delirium, N=516; nondelirium, N=343). Confirmatory factor analysis found all diagnostic features and core symptoms (cognitive, language, thought process, sleep-wake cycle, motor retardation), except motor agitation, loaded onto factor 1. Motor agitation loaded onto factor 2 with noncore symptoms (delusions, affective lability, and perceptual disturbances). Factor 1 loading supports delirium as a single construct, but when accompanied by psychosis, motor agitation's role may not be solely as a circadian activity indicator.

  7. Test equality between two binary screening tests with a confirmatory procedure restricted on screen positives.

    Science.gov (United States)

    Lui, Kung-Jong; Chang, Kuang-Chao

    2015-01-01

    In studies of screening accuracy, we may commonly encounter the data in which a confirmatory procedure is administered to only those subjects with screen positives for ethical concerns. We focus our discussion on simultaneously testing equality of sensitivity and specificity between two binary screening tests when only subjects with screen positives receive the confirmatory procedure. We develop four asymptotic test procedures and one exact test procedure. We derive sample size calculation formula for a desired power of detecting a difference at a given nominal [Formula: see text]-level. We employ Monte Carlo simulation to evaluate the performance of these test procedures and the accuracy of the sample size calculation formula developed here in a variety of situations. Finally, we use the data obtained from a study of the prostate-specific-antigen test and digital rectal examination test on 949 Black men to illustrate the practical use of these test procedures and the sample size calculation formula.

  8. A confirmatory factor analytical study of a servant leadership measure in South Africa

    OpenAIRE

    Bright Mahembe; Amos S. Engelbrecht

    2013-01-01

    Orientation: Servant leadership is a value-based leadership practice that plays a critical role in team effectiveness and organisational success. Research purpose: The goal of the study was to validate the Servant Leadership Questionnaire(SLQ), which Barbuto and Wheeler developed, on a South African sample. Motivation for the study: The literature is replete with evidence of the role of follower focused leadership practices in improving team effectiveness, employee engagement and organ...

  9. Development of LC-MS/MS confirmatory method for the determination of testosterone in bovine serum

    Directory of Open Access Journals (Sweden)

    Woźniak Barbara

    2017-03-01

    Full Text Available Introduction: In the European Union the use of steroid growth promoters is prohibited under Council Directive 96/22/EC. For effective control of illegal use of natural steroids, highly sensitive analytical methods are required, because sex hormones can be present in very low concentrations in biological samples. The aim of the study was to develop a confirmatory method for the detection of testosterone in bovine serum at ppt level.

  10. Evaluation of the Frequency for Gas Sampling for the High Burnup Confirmatory Data Project

    Energy Technology Data Exchange (ETDEWEB)

    Stockman, Christine T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Alsaed, Halim A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bryan, Charles R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Marschman, Steven C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Scaglione, John M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-05-01

    This report provides a technically based gas sampling frequency strategy for the High Burnup (HBU) Confirmatory Data Project. The evaluation of: 1) the types and magnitudes of gases that could be present in the project cask and, 2) the degradation mechanisms that could change gas compositions culminates in an adaptive gas sampling frequency strategy. This adaptive strategy is compared against the sampling frequency that has been developed based on operational considerations.

  11. Accuracy optimization of high-speed AFM measurements using Design of Experiments

    DEFF Research Database (Denmark)

    Tosello, Guido; Marinello, F.; Hansen, Hans Nørgaard

    2010-01-01

    Atomic Force Microscopy (AFM) is being increasingly employed in industrial micro/nano manufacturing applications and integrated into production lines. In order to achieve reliable process and product control at high measuring speed, instrument optimization is needed. Quantitative AFM measurement...... results are influenced by a number of scan settings parameters, defining topography sampling and measurement time: resolution (number of profiles and points per profile), scan range and direction, scanning force and speed. Such parameters are influencing lateral and vertical accuracy and, eventually......, the estimated dimensions of measured features. The definition of scan settings is based on a comprehensive optimization that targets maximization of information from collected data and minimization of measurement uncertainty and scan time. The Design of Experiments (DOE) technique is proposed and applied...

  12. LH2 Target Design & Position Survey Techniques for the MUSE experiment for Precise Proton Radius Measurement

    Science.gov (United States)

    Le Pottier, Luc; Roy, Pryiashee; Lorenzon, Wolfgang; Raymond, Richard; Steinberg, Noah; Rossi de La Fuente, Erick; MUSE (MUon proton Scattering Experiment) Collaboration

    2017-09-01

    The proton radius puzzle is a currently unresolved problem which has intrigued the scientific community, dealing with a 7 σ discrepancy between the proton radii determined from muonic hydrogen spectroscopy and electron scattering measurements. The MUon Scattering Experiment (MUSE) aims to resolve this puzzle by performing the first simultaneous elastic scattering measurements of both electrons and muons on the proton, which will allow the comparison of the radii from the two interactions with reduced systematic uncertainties. The data from this experiment is expected to provide the best test of lepton universality to date. The experiment will take place at the Paul Scherrer Institute in Switzerland in 2018. An essential component of the experiment is a liquid hydrogen (LH2) cryotarget system. Our group at the University of Michigan is responsible for the design, fabrication and installation of this system. Here we present our LH2 target cell design and fabrication techniques for successful operation at 20 K and 1 atm, and our computer vision-based target position survey system which will determine the position of the target, installed inside a vacuum chamber, with 0.01 mm or better precision at the height of the liquid hydrogen target and along the beam direction during the experiment.

  13. Metronome LKM: An open source virtual keyboard driver to measure experiment software latencies.

    Science.gov (United States)

    Garaizar, Pablo; Vadillo, Miguel A

    2017-10-01

    Experiment software is often used to measure reaction times gathered with keyboards or other input devices. In previous studies, the accuracy and precision of time stamps has been assessed through several means: (a) generating accurate square wave signals from an external device connected to the parallel port of the computer running the experiment software, (b) triggering the typematic repeat feature of some keyboards to get an evenly separated series of keypress events, or (c) using a solenoid handled by a microcontroller to press the input device (keyboard, mouse button, touch screen) that will be used in the experimental setup. Despite the advantages of these approaches in some contexts, none of them can isolate the measurement error caused by the experiment software itself. Metronome LKM provides a virtual keyboard to assess an experiment's software. Using this open source driver, researchers can generate keypress events using high-resolution timers and compare the time stamps collected by the experiment software with those gathered by Metronome LKM (with nanosecond resolution). Our software is highly configurable (in terms of keys pressed, intervals, SysRq activation) and runs on 2.6-4.8 Linux kernels.

  14. Experiment designed to measure the RBE of tritium for the induction of myeloid leukaemia in animals

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J R; Myers, D K; Gragtmans, N J

    1986-01-01

    The range in RBE vales measured for tritium can be attributed to differences in the biological endpoints measured, the reference radiation to which the effects of tritium were compared, and the tritium dosimetry of the particular study. Since the principal risk of low-level irradiation is the induction of cancers, it would be desirable to utilise this endpoint in tritium RBE experiments if these experiments are to be used to evaluate the quality factor for tritium. Furthermore, it would be desirable to use 200 k Vp X rays as the reference radiation since this radiation was suggested by ICRP as the standard reference to be used in the calculation of dose equivalents. Acute myeloid leukaemia is one of the earliest recognised examples of radiogenic cancer in humans and this endpoint has also been the subject of animal studies. A brief review is given of these animal studies to see if this endpoint is suitable for an experiment to measure the tritium RBE relative to 200 k Vp X rays. It was concluded that the male CBA/H mouse would be a suitable species and an experiment involving 5000 animals in four to five year study would be required to provide a useful estimate of the RBE for tritium.

  15. Measuring Starlight Deflection during the 2017 Eclipse: Repeating the Experiment that made Einstein Famous

    Science.gov (United States)

    Bruns, Donald

    2016-05-01

    In 1919, astronomers performed an experiment during a solar eclipse, attempting to measure the deflection of stars near the sun, in order to verify Einstein's theory of general relativity. The experiment was very difficult and the results were marginal, but the success made Albert Einstein famous around the world. Astronomers last repeated the experiment in 1973, achieving an error of 11%. In 2017, using amateur equipment and modern technology, I plan to repeat the experiment and achieve a 1% error. The best available star catalog will be used for star positions. Corrections for optical distortion and atmospheric refraction are better than 0.01 arcsec. During totality, I expect 7 or 8 measurable stars down to magnitude 9.5, based on analysis of previous eclipse measurements taken by amateurs. Reference images, taken near the sun during totality, will be used for precise calibration. Preliminary test runs performed during twilight in April 2016 and April 2017 can accurately simulate the sky conditions during totality, providing an accurate estimate of the final uncertainty.

  16. The final measurements of the muon decay parameters from the TWIST experiment

    International Nuclear Information System (INIS)

    Bayes, R

    2013-01-01

    The TWIST (TRIUMF Weak Interaction Symmetry Test) experiment probes the Lorentz structure of the weak interaction using muon decay. This structure has a very well defined form under the Standard Model (SM) which makes precise predictions for the shape of the decay positron spectrum with respect to momentum and angle. The shape of the spectrum may be described under some rather general assumptions using a set of decay parameters whose values according to the SM are ρ = δ = 3/4, η = 0, and ξ = 1. TWIST uses a large sample of muon decays in a large acceptance spectrometer to measure the decay parameters to an order of magnitude greater precision than previous measurements. This experiment saw its last year of data collection in 2007. As TWIST is a systematics dominated experiment, much effort has been spent on refinements of the estimates of the systematic uncertainties over previous TWIST results. These proceedings will discuss the measures taken to achieve the precision goal of parts in 10 4 , and the physics implications of the experiment.

  17. Analysis of oligonucleotide array experiments with repeated measures using mixed models

    Directory of Open Access Journals (Sweden)

    Getchell Thomas V

    2004-12-01

    Full Text Available Abstract Background Two or more factor mixed factorial experiments are becoming increasingly common in microarray data analysis. In this case study, the two factors are presence (Patients with Alzheimer's disease or absence (Control of the disease, and brain regions including olfactory bulb (OB or cerebellum (CER. In the design considered in this manuscript, OB and CER are repeated measurements from the same subject and, hence, are correlated. It is critical to identify sources of variability in the analysis of oligonucleotide array experiments with repeated measures and correlations among data points have to be considered. In addition, multiple testing problems are more complicated in experiments with multi-level treatments or treatment combinations. Results In this study we adopted a linear mixed model to analyze oligonucleotide array experiments with repeated measures. We first construct a generalized F test to select differentially expressed genes. The Benjamini and Hochberg (BH procedure of controlling false discovery rate (FDR at 5% was applied to the P values of the generalized F test. For those genes with significant generalized F test, we then categorize them based on whether the interaction terms were significant or not at the α-level (αnew = 0.0033 determined by the FDR procedure. Since simple effects may be examined for the genes with significant interaction effect, we adopt the protected Fisher's least significant difference test (LSD procedure at the level of αnew to control the family-wise error rate (FWER for each gene examined. Conclusions A linear mixed model is appropriate for analysis of oligonucleotide array experiments with repeated measures. We constructed a generalized F test to select differentially expressed genes, and then applied a specific sequence of tests to identify factorial effects. This sequence of tests applied was designed to control for gene based FWER.

  18. The road to patient experience of care measurement: lessons from the United States.

    Science.gov (United States)

    Zimlichman, Eyal; Rozenblum, Ronen; Millenson, Michael L

    2013-09-17

    Patient-centered care has become an increasing priority in the United States and plays a prominent role in recent healthcare reforms. One way the country has managed to advance patient-centered care is through establishment of a family of national patient experience surveys (the Consumer Assessment of Healthcare Providers and Systems Plans (CAHPS). CAHPS is publicly reported for several types of providers and was recently tied to hospital reimbursement. This is part of a trend over the last two decades that has shifted provider-patient relationships from a traditional paternal approach to customer service and then to clinical partnership. The health care system in Israel, however, is still struggling to overcome barriers to change in this area. While community based biannual patient experience surveys are conducted by the Myers-JDC-Brookdale Institute, there is no comprehensive national approach to measuring the patient experience across a broad range of settings. Only recently did the Israeli Ministry of Health take its first steps to include patient experience as a dimension of health care quality.In its current position, Israel should learn from the U.S. experience with policies promoting patient-centered care, and specifically the impact on clinical services of measuring the patient experience. Looking at what has happened in the United States, we suggest three main lessons. First, there is a need for a set of national patient experience surveys that would be publicly reported and eventually tied to provider reimbursement. Secondly, the national survey tools should be customized to the unique characteristics of Israeli society and draw from recent research on patient-centeredness to include new and important domains such as patient activation and shared decision-making. Finally, newer technological approaches should be explored with the aim of increasing response rates and the timeliness and usefulness of the surveys.

  19. Undergraduate Laboratory Experiment: Measuring Matter Antimatter Asymmetries at the Large Hadron Collider

    CERN Document Server

    Parkes, Chris; Gutierrez, J

    2015-01-01

    This document is the student manual for a third year undergraduate laboratory experiment at the University of Manchester. This project aims to measure a fundamental difference between the behaviour of matter and antimatter through the analysis of data collected by the LHCb experiment at the Large Hadron Collider. The three-body dmecays $B^\\pm \\rightarrow h^\\pm h^+ h^-$, where $h^\\pm$ is a $\\pi^\\pm$ or $K^\\pm$ are studied. The inclusive matter antimatter asymmetry is calculated, and larger asymmetries are searched for in localized regions of the phase-space.

  20. Revisiting an open access monograph experiment: measuring citations and tweets 5 years later.

    Science.gov (United States)

    Snijder, Ronald

    An experiment run in 2009 could not assess whether making monographs available in open access enhanced scholarly impact. This paper revisits the experiment, drawing on additional citation data and tweets. It attempts to answer the following research question: does open access have a positive influence on the number of citations and tweets a monograph receives, taking into account the influence of scholarly field and language? The correlation between monograph citations and tweets is also investigated. The number of citations and tweets measured in 2014 reveal a slight open access advantage, but the influence of language or subject should also be taken into account. However, Twitter usage and citation behaviour hardly overlap.

  1. Experiments to Evaluate and Implement Passive Tracer Gas Methods to Measure Ventilation Rates in Homes

    Energy Technology Data Exchange (ETDEWEB)

    Lunden, Melissa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Faulkner, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Heredia, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cohn, Sebastian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dickerhoff, Darryl [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Noris, Federico [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Logue, Jennifer [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hotchi, Toshifumi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singer, Brett [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sherman, Max H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-10-01

    This report documents experiments performed in three homes to assess the methodology used to determine air exchange rates using passive tracer techniques. The experiments used four different tracer gases emitted simultaneously but implemented with different spatial coverage in the home. Two different tracer gas sampling methods were used. The results characterize the factors of the execution and analysis of the passive tracer technique that affect the uncertainty in the calculated air exchange rates. These factors include uncertainties in tracer gas emission rates, differences in measured concentrations for different tracer gases, temporal and spatial variability of the concentrations, the comparison between different gas sampling methods, and the effect of different ventilation conditions.

  2. Evaluation of void fraction measurements from DADINE experience using RELAP4/MOD5 code

    International Nuclear Information System (INIS)

    Borges, R.C.; Freitas, R.L.

    1989-01-01

    The DADINE experiment measures the axial evolution of the void fraction by neutronic diffusion in two-phase flow in the wet regions of a pressurized water reactor in accident conditions. Since the theoretical/experimental confrontation is important for code evaluation, this paper presents the simulation with the RELAP4/MOD5 Code of the void fractions results obtained in the DADINE Experiment, that showed some deviation probably associated with the existing models in Code, special attention in the way of stablishing the two-phase flow and the no characterization of the differents flow regimes related with the void fractions. (author) [pt

  3. Measurement techniques of local parameters in the downcomer boiling experiment of APR1400

    International Nuclear Information System (INIS)

    Lee, Eu Hwak

    2004-02-01

    In order to investigate boiling phenomena experimentally in the downcomer during LBLOCA with Direct Vessel Injection (DVI), which is a new Safety Injection System (SIS) of Advanced Power Reactor 1400 MW (APR1400), several parameters should be measured through the verification of their applicability. In this study, measurement techniques of the parameters are developed for the downcomer boiling experiment; local phase velocities, local void fraction and heat flux from the heated wall. The experiment has been performed with the heated wall, which has a thickness of 8.2 cm and a height of 32.5 cm and made of the same material as the prototype (APR1400) with chrome coating against rusting. The newly developed pitot tube is applied to the measurement of local liquid velocity and its calibration curve is obtained experimentally with the consideration of the effect according to water temperature and hole size changes. The developed pitot tube measures the local liquid velocity with 0.69 % deviation and it is confirmed that the water temperature and geometrical change does not affect the calibration curve. The high-speed camera and commercial software are used to measure the local vapor velocity with the accuracy of 0.06 m/sec per pixel and the procedure is confirmed in the present study. It turns out that the vapor velocity is insensitive to void size. High-speed camera and image processing are used to measure the local void fraction with the determined intensity criterion for distinguishing each phase and the results are compared with the bulk void fraction by differential pressure transmitters. In the actual experiment, the developed method is applied successfully and the results show that the criterion of intensity has little effect on local void fraction. And, it is observed that the tendency between the measured local and bulk void faction is maintained with time. In order to measure heat flux from the heated wall, two heat flux measurement techniques are developed

  4. The Work Experience Measurement Scale (WEMS): a useful tool in workplace health promotion.

    Science.gov (United States)

    Nilsson, Petra; Andersson, H Ingemar; Ejlertsson, Göran

    2013-01-01

    To present validity data for the Work Experience Measurement Scale (WEMS), an instrument measuring multifaceted work experience from a salutogenic health resource perspective as a contrast to the more common pathogenic risk perspective, by exploring WEMS relationship to established measurements that are positively related to health and work. A salutogenic perspective focuses on finding conditions and resources in life, for example at work, that can enhance the individual's health and strength, instead of those causing illness and weakness. This study was carried out in 2009 at a Swedish hospital with a web-based survey (WEMS) to 770 employees. Different occupational groups at the hospital participated. Additional questionnaires used at the same time were the Utrecht Work Engagement Scale (UWES-9), the Salutogenic Health Indicator Scale (SHIS), the General Self-Efficacy scale (GSE), and three questions about self-rated health, general well-being, and quality of life. Cronbach's Alpha of WEMS sub-indices were in the interval of 0.85-0.96. Convergent validity and discriminant validity of WEMS and its sub-indices were shown to be satisfying by correlations. In addition, WEMS demonstrated the ability to discriminate between groups. WEMS sub-indices discriminated even better between groups than the total index. The WEMS proved to be a workplace health promotion questionnaire that was able to measure experiences of work from a salutogenic perspective. The WEMS has a potential of being a useful tool in workplace health promotion to enhance positive human capabilities and resources to improve work performance.

  5. An experiment for the precision measurement of the radiative decay mode of the neutron

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, R.L., E-mail: cooperrl@umich.ed [University of Michigan, Ann Arbor, MI 48109 (United States); Bass, C.D. [National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States); Beise, E.J.; Breuer, H. [University of Maryland, College Park, MD 20742 (United States); Byrne, J. [University of Sussex, BN1 9QH (United Kingdom); Chupp, T.E. [University of Michigan, Ann Arbor, MI 48109 (United States); Coakley, K.J. [National Institute of Standards and Technology, Boulder, CO 80305 (United States); Dewey, M.S.; Fisher, B.M.; Fu, C.; Gentile, T.R. [National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States); McGonagle, M. [University of Maryland, College Park, MD 20742 (United States); Mumm, H.P.; Nico, J.S.; Thompson, A.K. [National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States); Wietfeldt, F.E. [Tulane University, New Orleans, LA 70118 (United States)

    2009-12-11

    The familiar neutron decay into a proton, electron, and antineutrino can be accompanied by photons with sufficient energy to be detected. We recently reported the first observation of the radiative beta decay branch for the free neutron with photons of energy 15-340 keV. We performed the experiment in the bore of a superconducting magnet where electron, proton, and photon signals were measured. A bar of bismuth germanate scintillating crystal coupled to an avalanche photodiode served as the photon detector that operated in the cryogenic, high magnetic field environment. The branching ratio for this energy region was measured and is consistent with the theoretical calculation. An experiment is under way to measure the branching ratio with an improved precision of 1% relative standard uncertainty and to measure the photon energy spectrum. In this paper, the apparatus modifications to reduce the systematic uncertainties will be described. Central to these improvements is the development of a 12-element detector based on the original photon detector design that will improve the statistical sensitivity. During data acquisition, a detailed calibration program will be performed to improve the systematic uncertainties. The development of these modifications is currently under way, and the second run of the experiment commenced in July 2008.

  6. A Platform for X-Ray Thomson Scattering Measurements of Radiation Hydrodynamics Experiments on the NIF

    Science.gov (United States)

    Lefevre, Heath; Ma, Kevin; Belancourt, Patrick; MacDonald, Michael; Doeppner, Tilo; Keiter, Paul; Kuranz, Carolyn

    2017-10-01

    A recent experiment on the National Ignition Facility (NIF) radiographed the evolution of the Rayleigh-Taylor (RT) instability under high and low drive cases. This experiment showed that under a high drive the growth rate of the RT instability is reduced relative to the low drive case. The high drive launches a radiative shock, increases the temperature of the post-shock region, and ablates the spikes, which reduces the RT growth rate. The plasma parameters must be measured to validate this claim. We present a target design for making X-Ray Thomson Scattering (XRTS) measurements on radiation hydrodynamics experiments on NIF to measure the electron temperature of the shocked region in the above cases. Specifically, we show that a previously fielded NIF radiation hydrodynamics platform can be modified to allow sufficient signal and temperature resolution for XRTS measurements. This work is funded by the NNSA-DS and SC-OFES Joint Program in High-Energy-Density Laboratory Plasmas, Grant Number DE-NA0002956 and the National Science Foundation through the Basic Plasma Science and Engineering program.

  7. Process measures or patient reported experience measures (PREMs) for comparing performance across providers? A study of measures related to access and continuity in Swedish primary care.

    Science.gov (United States)

    Glenngård, Anna H; Anell, Anders

    2018-01-01

    Aim To study (a) the covariation between patient reported experience measures (PREMs) and registered process measures of access and continuity when ranking providers in a primary care setting, and (b) whether registered process measures or PREMs provided more or less information about potential linkages between levels of access and continuity and explaining variables. Access and continuity are important objectives in primary care. They can be measured through registered process measures or PREMs. These measures do not necessarily converge in terms of outcomes. Patient views are affected by factors not necessarily reflecting quality of services. Results from surveys are often uncertain due to low response rates, particularly in vulnerable groups. The quality of process measures, on the other hand, may be influenced by registration practices and are often more easy to manipulate. With increased transparency and use of quality measures for management and governance purposes, knowledge about the pros and cons of using different measures to assess the performance across providers are important. Four regression models were developed with registered process measures and PREMs of access and continuity as dependent variables. Independent variables were characteristics of providers as well as geographical location and degree of competition facing providers. Data were taken from two large Swedish county councils. Findings Although ranking of providers is sensitive to the measure used, the results suggest that providers performing well with respect to one measure also tended to perform well with respect to the other. As process measures are easier and quicker to collect they may be looked upon as the preferred option. PREMs were better than process measures when exploring factors that contributed to variation in performance across providers in our study; however, if the purpose of comparison is continuous learning and development of services, a combination of PREMs and

  8. A Study on Relationships between Functional Performance and Task Performance Measure through Experiments in NPP MCR

    International Nuclear Information System (INIS)

    Jang, In Seok; Seong, Poong Hyun; Park, Jin Kyun

    2011-01-01

    Further improvements in levels of organization, management, man-machine interfaces, education, training, etc. are required, if high operating reliability of operators in huge and complex plants such as chemical plants and electrical power generating plants is to be maintained. Improvement requires good understanding of operators' behavior, including defining what is good performance for operators, especially in emergency situations. Human performance measures, therefore, are important to enhance performance and to reduce the probability of incidents and accidents in Nuclear Power Plants (NPPs). Operators' performance measures are used for multi-objectives such as control room design, human system interface evaluation, training, procedure and so on. There are two kinds of representative methods to measure operators' performance. These methods are now known as the functional performance measure and task performance measure. Functional performance measures are basically based on the plant process parameters. Functional performance measures indicate how well the operators controlled selected critical parameters. The parameters selected in this paper are derived from the four Critical Safety Functions (CSFs) identified in the emergency operating procedures such as achievement of subcriticality, maintenance of core cooling, maintenance of heat sink and maintenance of containment integrity. Task performance measures are based on the task analysis. Task analysis is to determine the tasks required and how operators are performed. In this paper, task analysis is done with ideal path for an accident completed by experts and Emergency Operation Procedure (EOP). However, most literatures related to operators' performance have been using one of these measures and there is no research to find out the relationships between two measures. In this paper, the relationships between functional performance measure and task performance measure are investigated using experiments. Shortly

  9. Measurement of direct CP-violation with the NA48 experiment at the CERN SPS

    CERN Document Server

    Blümer, H

    1999-01-01

    The NA48 experiment at the CERN SPS uses simultaneous, nearly collinear beams of long-lived and short-lived neutral kaons to measure the direct CP-violation parameter epsilon '/ epsilon using the double ratio method to an overall accuracy of 2.10/sup -4/, three times better than previous results. The detector has been installed and commissioned in 1995 and 1996. First physics data were recorded during 42 days in fall 1997 yielding more events than the previous experiment NA31. The talk presents the apparatus performance, data quality, the current status of the physics analysis and ongoing activities. The experiment has performed another data run from May to September 1998, which has given a substantial increase in statistics. (11 refs).

  10. Measurements of atmospheric and gamma rays-balloon experiments at subantartic region

    International Nuclear Information System (INIS)

    Jayanthi, U.B.; Correa, R.V.; Blanco, F.G.

    1986-01-01

    The results of two stratospheric balloon experiments conducted to measure the atmospheric X and gamma rays are presented. These experiments, conducted at Comandante Ferraz base in subantarctic region, have provided the spectrum of ground radioactivity in gamma rays (0.2 to 2.9 MeV) and atmospheric X-ray spectra at different altitudes. We specifically chose to discuss the observed ceiling spectrum of X-rays in the 28 to 180KeV region observed at 7.0 g. cm -2 . We have utilized the data of other experiments with different telescope geometries, to evaluate the builup effects due to cosmic ray secondaries in atmosphere. This behaviour, previoulsy studied for atmospheric gamma rays, permitted to compare the up/down flux rations to explain the observed atmospheric X-ray spectrum. (Author) [pt

  11. Discrete choice experiments to measure consumer preferences for health and healthcare.

    Science.gov (United States)

    Viney, Rosalie; Lancsar, Emily; Louviere, Jordan

    2002-08-01

    To investigate the impact of health policies on individual well-being, estimate the value to society of new interventions or policies, or predict demand for healthcare, we need information about individuals' preferences. Economists usually use market-based data to analyze preferences, but such data are limited in the healthcare context. Discrete choice experiments are a potentially valuable tool for elicitation and analysis of preferences and thus, for economic analysis of health and health programs. This paper reviews the use of discrete choice experiments to measure consumers' preferences for health and healthcare. The paper provides an overview of the approach and discusses issues that arise when using discrete choice experiments to assess individuals' preferences for health and healthcare.

  12. An indirect measurement of the width of the w boson at the D0 experiment

    International Nuclear Information System (INIS)

    Telford, Paul; Manchester U.

    2006-01-01

    This thesis presents an indirect measurement of the width of the W boson using data collected at the D0 experiment, a multipurpose particle detector utilizing the Fermilab Tevatron. The W width was determined from the ratio of W → μν to Z → μ + μ - cross sections to be Γ W = 2168 ± 22(stat) ± 62(syst) -16 +24 (pdf) ± 4(other) MeV, in good agreement with the Standard Model prediction and other experimental measurements. In addition there is a description of how work made towards this measurement has been used to improve the parameterized detector simulation, a vital tool in the obtention of physics results from signals observed in the detector, and in estimating the uncertainty due to choice of PDF, which is of interest for all measurements made at hadron colliders

  13. Analysis of void reactivity measurements in full MOX BWR physics experiments

    International Nuclear Information System (INIS)

    Ando, Yoshihira; Yamamoto, Toru; Umano, Takuya

    2008-01-01

    In the full MOX BWR physics experiments, FUBILA, four 9x9 test assemblies simulating BWR full MOX assemblies were located in the center of the core. Changing the in-channel moderator condition of the four assemblies from 0% void to 40% and 70% void mock-up, void reactivity was measured using Amplified Source Method (ASM) technique in the subcritical cores, in which three fission chambers were located. ASM correction factors necessary to express the consistency of the detector efficiency between measured core configurations were calculated using collision probability cell calculation and 3D-transport core calculation with the nuclear data library, JENDL-3.3. Measured reactivity worth with ASM correction factor was compared with the calculated results obtained through a diffusion, transport and continuous energy Monte Carlo calculation respectively. It was confirmed that the measured void reactivity worth was reproduced well by calculations. (author)

  14. Measuring medicine-related experiences from the patient perspective: a systematic review

    Directory of Open Access Journals (Sweden)

    Katusiime B

    2016-10-01

    Full Text Available Barbra Katusiime,1 Sarah Corlett,1 Joanne Reeve,2 Janet Krska1 1Medway School of Pharmacy, The Universities of Kent and Greenwich, Chatham, Maritime, Kent, UK; 2Warwick Medical School, University of Warwick, Coventry, UK Background: There is an increasing drive to measure and so improve patients’ experiences and outcomes of health care. This also applies to medicines, given their ubiquity as health care interventions. Patients’ experiences of using medicines vary, and instruments which measure these are seen as an essential component to improve care. We aimed to identify generic measures of patients’ experiences of using prescription medicines and to examine their properties and suitability for use in research or practice. Methods: Multiple electronic databases were searched: MEDLINE, Embase, PsycINFO, PsycARTICLES, CINHAL Plus, PROQOLID®, and Google Scholar. We identified, critically appraised, and summarized generic questionnaires assessing one or more aspects of the medicine use experience among adult patients using prescription medicines for chronic conditions, and the process of questionnaire development, degree of patient involvement, and/or validation processes. Results: Fifteen questionnaires were included. Of these, nine measures were multidimensional, covering various aspects of medicine use. Six instruments covered only a single domain, assessing a specific facet of using medicines. Domains covered were the following: effectiveness; convenience, practicalities, and/or managing medicines; information, knowledge, and/or understanding; side effects; relationships and/or communication with health professionals; impact on daily living and/or social life; general satisfaction; attitudes; beliefs, concerns, and/or perceptions; medical follow-up and/or adherence-related issues; treatment- and/or medicine-related burden, perceived control, or autonomy; self-confidence about medicine use; availability and accessibility; and medicine

  15. A novel method for measuring health care system performance: experience from QIDS in the Philippines.

    Science.gov (United States)

    Solon, Orville; Woo, Kimberly; Quimbo, Stella A; Shimkhada, Riti; Florentino, Jhiedon; Peabody, John W

    2009-05-01

    Measuring and monitoring health system performance is important albeit controversial. Technical, logistic and financial challenges are formidable. We introduced a system of measurement, which we call Q, to measure the quality of hospital clinical performance across a range of facilities. This paper describes how Q was developed, implemented in hospitals in the Philippines and how it compares with typical measures. Q consists of measures of clinical performance, patient satisfaction and volume of physician services. We evaluate Q using experimental data from the Quality Improvement Demonstration Study (QIDS), a randomized policy experiment. We determined its responsiveness over time and to changes in structural measures such as staffing and supplies. We also examined the operational costs of implementing Q. Q was sustainable, minimally disruptive and readily grafted into existing routines in 30 hospitals in 10 provinces semi-annually for a period of 2(1/2) years. We found Q to be more responsive to immediate impacts of policy change than standard structural measures. The operational costs totalled USD2133 or USD305 per assessment per site. Q appears to be an achievable assessment tool that is a comprehensive and responsive measure of system level quality at a limited cost in resource-poor settings.

  16. Measurements of Discrete Symmetries in the Neutral Kaon System with the CPLEAR (PS195) Experiment

    CERN Document Server

    Ruf, Thomas

    2015-01-01

    The antiproton storage ring LEAR offered unique opportunities to study the symmetries which exist between matter and antimatter. At variance with other approaches at this facility, CPLEAR was an experiment devoted to the study of T, CPT and CP symmetries in the neutral kaon system. It measured with high precision the time evolution of initially strangeness-tagged $K^0$ and $\\bar{K}^0$ states to determine the size of violations with respect to these symmetries in the context of a systematic study. In parallel, limits concerning quantum-mechanical predictions (EPR paradox, coherence of the wave function) or the equivalence principle of general relativity have been obtained. This article will first discuss briefly the unique low energy antiproton storage ring LEAR followed by a description of the CPLEAR experiment, including the basic formalism necessary to understand the time evolution of a neutral kaon state and the main results related to measurements of discrete symmetries in the neutral kaon system. An exce...

  17. Psychometric testing of an instrument to measure the experience of home.

    Science.gov (United States)

    Molony, Sheila L; McDonald, Deborah Dillon; Palmisano-Mills, Christine

    2007-10-01

    Research related to quality of life in long-term care has been hampered by a paucity of measurement tools sensitive to environmental interventions. The primary aim of this study was to test the psychometric properties of a new instrument, the Experience of Home (EOH) Scale, designed to measure the strength of the experience of meaningful person-environment transaction. The instrument was administered to 200 older adults in diverse dwelling types. Principal components analysis provided support for construct validity, eliciting a three-factor solution accounting for 63.18% of variance in scores. Internal consistency reliability was supported with Cronbach's alpha of .96 for the entire scale. The EOH Scale is a unique research tool to evaluate interventions to improve quality of living in residential environments.

  18. A study of microwave interferometers for electron density measurements in REB-plasma experiments

    International Nuclear Information System (INIS)

    Saxena, A.C.; Paithankar, A.S.; Iyyengar, S.K.; Rohatgi, V.K.

    1981-01-01

    In order to select a suitable microwave interferometer for electron density measurements in Relativistic Electron Beam (REB)-Plasma Experiments, a study has been carried out of four types of interferometers, viz. simple interferometer, standing-wave interferometer, frequency and phase modulated interferometers. Various direct reading interferometers which give a voltage proportional to the phase shift, are also discussed. Systems have been analysed in terms of time resolution, phase sensitivity, system stability, ease of measurement etc. Theoretical and experimental limitations of various systems have been indicated. Summary of the various systems is presented in a table to aid the experimentalist to select the most appropriate system for the prevailina experimental conditions. Finally, an attempt has been made to find out the interferometer system best suited for REB-Plasma Experiments. (author)

  19. Neutral Pion Transition Form Factor Measurement and Run Control at the NA62 experiment

    CERN Document Server

    AUTHOR|(CDS)2082375; Goudzovski, Evgueni

    The measurement of the 0 electromagnetic transition form factor (TFF) slope a is performed in the time-like region of momentum transfer using a sample of 1.1 $10^6$ $\\pi^0 \\to e^+ e^- \\gamma$ Dalitz decays collected at the NA62-RK experiment in 2007. The event selection, the fit procedure and the study of the systematic ffects are presented. The final result obtained $a = (3.68 \\pm 0.51stat \\pm 0.25syst) \\times 10^{-2} $ is the most precise to date and represents the first evidence of a non-zero $\\pi^0$ TFF slope with more than 3 $\\sigma$ significance. The NA62 experiment based at the CERN SPS is currently taking data and aims at measuring the branching fraction of the $K \\to \\pi \

  20. Reconstruction of Huygens' gedanken experiment and measurements based on video analysis tools

    International Nuclear Information System (INIS)

    Malgieri, Massimiliano; Onorato, Pasquale; Mascheretti, Paolo; De Ambrosis, Anna

    2013-01-01

    In this paper we describe the practical realization and the analysis of a thought experiment devised by Christiaan Huygens, which was pivotal in his derivation of the formula for the radius of gyration of a compound pendulum. Measurements are realized by recording the experiment with a digital camera, and using a video analysis and modelling software tool to process and extract information from the acquired videos. Using this setup, detailed quantitative comparisons between measurements and theoretical predictions can be carried out, focusing on many relevant topics in the undergraduate physics curriculum, such as the ‘radius of gyration’, conservation of energy, moment of inertia, constraint and reaction forces, and the behaviour of the centre of mass. (paper)

  1. Design of channel experiment equipment for measuring coolant velocity of innovative research reactor

    International Nuclear Information System (INIS)

    Muhammad Subekti; Endiah Puji Hastuti; Dedi Heriyanto

    2014-01-01

    The design of innovative high flux research reactor (RRI) requires high power so that the capability core cooling requires to be improved by designing the faster core coolant velocity near to the critical velocity limit. Hence, the critical coolant velocity as the one of the important parameter of the reactor safety shall be measured by special equipment to the velocity limit that may induce fuel element degradation. The research aims is to calculate theoretically the critical coolant velocity and to design the special experiment equipment namely EXNal for measuring the critical coolant velocity in fuel element subchannel of the RRI. EXNal design considers the critical velocity calculation result of 20.52 m/s to determine the variation of flow rate of 4.5-29.2 m 3 /h, in which the experiment could simulate the 1-4X standard coolant velocity of RSG-GAS as well as destructive test of RRI's fuel plate. (author)

  2. Optical transition radiation measurements for the Los Alamos and Boeing Free-Electron Laser experiments

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.; Feldman, R.B.; Feldman, D.W.; Apgar, S.A.; Calsten, B.E.; Fiorito, R.B.; Rule, D.W.

    1988-01-01

    Optical transition radiation (OTR) measurements of the electron-beam emittance have been performed at a location just before the wiggler in the Los Alamos Free-Electron Laser (FEL) experiment. Beam profiles and beam divergence patterns from a single macropulse were recorded simultaneously using two intensified charge-injection device (CID) television cameras and an optical beamsplitter. Both single-foil OTR and two-foil OTR interference experiments were performed. Preliminary results are compared to a reference variable quadrupole, single screen technique. New aspects of using OTR properties for pointing the e-beam on the FEL oscillator axis, as well as measuring e-beam emittance are addressed. 7 refs., 9 figs.

  3. Ion Spin-Up, Temperature, and Flow Measurements in the TCSU Experiment

    Science.gov (United States)

    Deards, C. L.; Grossnickle, J. A.; Steinhauer, L. C.; Melnik, P. A.; Milroy, R. D.

    2009-11-01

    The Translation, Confinement, and Sustainment Upgrade (TCSU) experiment employs a bakeable ultra-high vacuum chamber to reduce impurities and overall recycling. In recent experiments with Ti gettering applied to the plasma tube, radiation from impurities was dramatically reduced and recycling was almost eliminated. Ion temperature and azimuthal rotation velocities data from the resulting lower density, higher temperature FRC will be presented. The data comes from Doppler-broadening and Doppler-shifted measurements of Si III, C III, and O III, the dominant impurities in the TCSU plasma. Additionally, plans and initial data will be presented on azimuthal and poloidal velocity shear. Velocity shear is thought to improve stability and transport. All data measurements are made using an Acton Research SpectraPro 500i Czerny-Turney type spectrograph.

  4. A comparison of predictions and measurements for the Stripa simulated drift experiment

    International Nuclear Information System (INIS)

    Hodgkinson, D.

    1991-02-01

    This paper presents a comparison of measurements and predictions for the simulated drift experiment based on groundwater flow to the D-holes at the SCV site. The comparison was carried out on behalf of the Stripa task force on fracture flow modelling, as a learning exercise for the validation exercise to be based on flow to the validation drift. The paper summarises the characterisation data and their preliminary interpretation, and reviews the fracture flow modelling predictions made by teams from AEA Harwell, Golder Associates and Lawrence Berkeley Laboratory. The predictions are compared with each other and with the D-hole inflow measurements, and this experience is used to provide detailed feedback to future experimental and modelling work. (35 refs.)

  5. The PVLAS experiment: measuring vacuum magnetic birefringence and dichroism with a birefringent Fabry-Perot cavity

    Energy Technology Data Exchange (ETDEWEB)

    Della Valle, Federico; Milotti, Edoardo [INFN, Trieste (Italy); Universita di Trieste, Dipt. di Fisica, Trieste (Italy); Ejlli, Aldo; Messineo, Giuseppe; Zavattini, Guido [INFN, Ferrara (Italy); Universita di Ferrara, Dipt. di Fisica e Scienze della Terra, Ferrara (Italy); Gastaldi, Ugo [INFN, Ferrara (Italy); Pengo, Ruggero; Ruoso, Giuseppe [INFN, Lab. Nazionale di Legnaro, Legnaro (Italy)

    2016-01-15

    Vacuum magnetic birefringence was predicted long time ago and is still lacking a direct experimental confirmation. Several experimental efforts are striving to reach this goal, and the sequence of results promises a success in the next few years. This measurement generally is accompanied by the search for hypothetical light particles that couple to two photons. The PVLAS experiment employs a sensitive polarimeter based on a high finesse Fabry-Perot cavity. In this paper we report on the latest experimental results of this experiment. The data are analysed taking into account the intrinsic birefringence of the dielectric mirrors of the cavity. Besides a new limit on the vacuum magnetic birefringence, the measurements also allow the model-independent exclusion of new regions in the parameter space of axion-like and milli-charged particles. In particular, these last limits hold also for all types of neutrinos, resulting in a laboratory limit on their charge. (orig.)

  6. Using particle tracking to measure flow instabilities in an undergraduate laboratory experiment

    Science.gov (United States)

    Kelley, Douglas H.; Ouellette, Nicholas T.

    2011-03-01

    Much of the drama and complexity of fluid flow occurs because its governing equations lack unique solutions. The observed behavior depends on the stability of the multitude of solutions, which can change with the experimental parameters. Instabilities cause sudden global shifts in behavior. We have developed a low-cost experiment to study a classical fluid instability. By using an electromagnetic technique, students drive Kolmogorov flow in a thin fluid layer and measure it quantitatively with a webcam. They extract positions and velocities from movies of the flow using Lagrangian particle tracking and compare their measurements to several theoretical predictions, including the effect of the drive current, the spatial structure of the flow, and the parameters at which instability occurs. The experiment can be tailored to undergraduates at any level or to graduate students by appropriate emphasis on the physical phenomena and the sophisticated mathematics that govern them.

  7. Measurement of short transverse relaxation times by pseudo-echo nutation experiments

    Science.gov (United States)

    Ferrari, Maude; Moyne, Christian; Canet, Daniel

    2018-07-01

    Very short NMR transverse relaxation times may be difficult to measure by conventional methods. Nutation experiments constitute an alternative approach. Nutation is, in the rotating frame, the equivalent of precession in the laboratory frame. It consists in monitoring the rotation of magnetization around the radio-frequency (rf) field when on-resonance conditions are fulfilled. Depending on the amplitude of the rf field, nutation may be sensitive to the two relaxation rates R1 and R2. A full theoretical development has been worked out for demonstrating how these two relaxation rates could be deduced from a simple nutation experiment, noticing however that inhomogeneity of the rf field may lead to erroneous results. This has led us to devise new experiments which are the equivalent of echo techniques in the rotating frame (pseudo spin-echo nutation experiment and pseudo gradient-echo experiment). Full equations of motion have been derived. Although complicated, they indicate that the sum of the two relaxation rates can be obtained very accurately and not altered by rf field inhomogeneity. This implies however an appropriate data processing accounting for the oscillations which are superposed to the echo decays and, anyway, theoretically predicted. A series of experiments has been carried out for different values of the rf field amplitude on samples of water doped with a paramagnetic compound at different concentrations. Pragmatically, as R1 can be easily measured by conventional methods, its value is entered in the data processing algorithm which then returns exclusively the value of the transverse relaxation time. Very consistent results are obtained that way.

  8. Design features and operating experiences of neutron measurement system for HANARO

    International Nuclear Information System (INIS)

    Kim, Young Ki; Choi, Young San

    1999-02-01

    This paper discusses unique mechanical and electrical design features of neutron measurement system for HANARO and its operating experiences. Some unexpected problems and misbehaviors during installation and commissioning are briefly introduced. Engineering approaches and procedures in order to solve the problems we are described in priority. It has been proved, through years of operation that the wide range neutron measurement system for HANARO has a good capability of providing the stable and reliable neutron flux signal for reactor control and reactor protection. I hopefully expect that the engineering solutions suggested in this report could be a good reference to the other applications. (Author). 12 refs., 6 tabs., 23 figs

  9. Tandem-Mirror Experiment-Upgrade neutral pressure measurement diagnostic systems

    International Nuclear Information System (INIS)

    Pickles, W.L.; Allen, S.L.; Hill, D.N.; Hunt, A.L.; Simonen, T.C.

    1985-01-01

    The Tandem-Mirror Experiment-Upgrade (TMX-U) has a large and complex system of Bayard--Alpert, magnetron, and Penning gauges, in addition to mass spectrometers (RGA), all of which measure neutral pressures in the many internal regions of TMX-U. These pressure measurements are used as part of the confinement physics data base as well as for management of the TMX-U vacuum system. Dynamic pressures are modeled by a coupled-volumes simulation code, which includes wall reflux, getter pumping, and plasma pumping

  10. Measurements of the Top-Higgs Coupling with the CMS Experiment

    CERN Document Server

    Mildner, Hannes

    The top-Higgs coupling is constrained using data measured with the CMS experiment in LHC Run 1 and 2. Constraints on anomalous top-Higgs couplings are derived by re-analyzing CMS Run 1 measurements. Furthermore, a search for Higgs production in association with a top-quark pair and Higgs-boson decays into b-quarks in Run 2 data is presented. Upper limits on ttH production are calculated and it is demonstrated that the analysis can also be used to constrain anomalous top-Higgs couplings.

  11. Fast time resolution charge-exchange measurements during the fishbone instability in the poloidal divertor experiment

    International Nuclear Information System (INIS)

    Beiersdorfer, P.; Kaita, R.; Goldston, R.J.

    1984-01-01

    Measurements of fast ion losses due to the fishbone instability during high β/sub T/q neutral beam heated discharges in the Poloidal Divertor Experiment have been made using two new vertical-viewing charge-exchange analyzers. The measurements show that the instability has an n=1 toroidal mode number, and that it ejects beam ions in a toroidally rotating beacon directed outward along a major radius. Observations of ejected ions with energies up to twice the beam injection energy at R approx. = R 0 + a indicate the presence of a non-μ-conserving acceleration mechanism

  12. Final scientific and technical report: New experiments to measure the neutrino mass scale

    Energy Technology Data Exchange (ETDEWEB)

    Monreal, Benjamin [Univ. of California, Santa Barbara, CA (United States)

    2016-11-19

    In this work, we made material progress towards future measurements of the mass of the neutrino. The neutrino is a fundamental particle, first observed in the 1950s and subjected to particularly intense study over the past 20 years. It is now known to have some, non-zero mass, but we are in an unusual situation of knowing the mass exists but not knowing what value it takes. The mass may be determined by precise measurements of certain radioactive decay distributions, particularly the beta decay of tritium. The KATRIN experiment is an international project which is nearing the beginning of a tritium measurement campaign using a large electrostatic spectrumeter. This research included participation in KATRIN, including construction and delivery of a key calibration subsystem, the ``Rear Section''. To obtain sensitivity beyond KATRIN's, new techniques are required; this work included R&D on a new technique we call CRES (Cyclotron Resonance Electron Spectroscopy) which has promise to enable even more sensitive tritium decay measurements. We successfully carried out CRES spectroscopy in a model system in 2014, making an important step towards the design of a next-generation tritium experiment with new neutrino mass measurement abilities.

  13. Double slit experiment with quantum detectors: mysteries, meanings, misinterpretations and measurement

    Science.gov (United States)

    Rameez-ul-Islam; Ikram, Manzoor; Hasan Mujtaba, Abid; Abbas, Tasawar

    2018-01-01

    We propose an idea for symmetric measurements through the famous double slit experiment (DSE) in a new detection scenario. The interferometric setup is complemented here with quantum detectors that switch to an arbitrary superposition after interaction with the arms of the DSE. The envisioned schematics cover the full measurement range, i.e. from the weak to the strong projective situation with selectivity being a smoothly tunable open option, and suggests an alternative methodology for weak measurements based on information overlap from DSE paths. The results, though generally in agreement with the quantum paradigm, raise many questions over the nature of probabilities, the absurdity of the common language for phenomena’s description in the theory and the boundary separating the projective/non-projective measurements, and the related misconceived interpretations. Further, the results impose certain constraints over the hidden variable theories as well as on the repercussions of the weak measurements. Although described as a thought experiment, the proposal can equally be implemented experimentally under a prevailing research scenario.

  14. Measures to overcome consequences of agricultural land fragmentation: European experience and Ukrainian realities

    Directory of Open Access Journals (Sweden)

    Andriy Popov

    2016-03-01

    Full Text Available One of the land reform implementation results in Ukraine is the distribution of the state-owned agricultural land to the rural population in the form of physical land parcels. As a consequence, however, the land was subdivided into many small units. This land fragmentation has led to fundamental changes in the formation of the new agricultural enterprises and brought some negative consequences in their functioning. The problem of the land fragmentation in Ukraine is quite new and uninvestigated. The aim of the article is to analyze the existing measures (instruments in European countries for reducing the effects of agricultural land fragmentation and to determine the possibility of «transplantability» of Western experience to Ukraine. The principal measures to decrease the agricultural land fragmentation in European countries are: voluntary parcel exchange, land banking and land consolidation. The article presents the characteristics and comparative analysis of these measures. One of the four types of land fragmentation is a main problem of Ukraine, namely the discrepancy between the landownership and the land use. The Western European countries have been used the three instruments for reducing only two types of land fragmentation: the land use fragmentation and the internal fragmentation. Consequently, the using of Western European measures to decrease agricultural land fragmentation is impossible without their adaptation to the Ukrainian realities. Therefore, the actual problem in Ukraine today is to find the own measures to overcome the problem of agricultural land fragmentation based on the Western European experience.

  15. Space Flight Experiments to Measure Polymer Erosion and Contamination on Spacecraft

    Science.gov (United States)

    Lillis, Maura C.; Youngstrom, Erica E.; Marx, Laura M.; Hammerstrom, Anne M.; Finefrock, Katherine D.; Youngstrom, Christiane A.; Kaminski, Carolyn; Fine, Elizabeth S.; Hunt, Patricia K.; deGroh, Kim K.

    2002-01-01

    Atomic oxygen erosion and silicone contamination are serious issues that could damage or destroy spacecraft components after orbiting for an extended period of time, such as on a space station or satellite. An experiment, the Polymer Erosion And Contamination Experiment (PEACE) will be conducted to study the effects of atomic oxygen (AO) erosion and silicone contamination, and it will provide information and contribute to a solution for these problems. PEACE will fly 43 different polymer materials that will be analyzed for AO erosion effects through two techniques: mass loss measurement and recession depth measurement. Pinhole cameras will provide information about the arrival direction of AO, and silicone contamination pinhole cameras will identify the source of silicone contamination on a spacecraft. All experimental hardware will be passively exposed to AO for up to two weeks in the actual space environment when it flies in the bay of a space shuttle. A second set of the PEACE Polymers is being exposed to the space environment for erosion yield determination as part of a second experiment, Materials International Space Station Experiment (MISSE). MISSE is a collaboration between several federal agencies and aerospace companies. During a space walk on August 16, 2001, MISSE was attached to the outside of the International Space Station (ISS) during an extravehicular activity (EVA), where it began its exposure to AO for approximately 1.5 years. The PEACE polymers, therefore, will be analyzed after both short-term and long-term AO exposures for a more complete study of AO effects.

  16. Measurements of Prompt and MHD-Induced Fast Ion Loss from National Spherical Torus Experiment Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    D.S. Darrow; S.S. Medley; A.L. Roquemore; W.W. Heidbrink; A. Alekseyev; F.E. Cecil; J. Egedal; V.Ya. Goloborod' ko; N.N. Gorelenkov; M. Isobe; S. Kaye; M. Miah; F. Paoletti; M.H. Redi; S.N. Reznik; A. Rosenberg; R. White; D. Wyatt; V.A. Yavorskij

    2002-10-15

    A range of effects may make fast ion confinement in spherical tokamaks worse than in conventional aspect ratio tokamaks. Data from neutron detectors, a neutral particle analyzer, and a fast ion loss diagnostic on the National Spherical Torus Experiment (NSTX) indicate that neutral beam ion confinement is consistent with classical expectations in quiescent plasmas, within the {approx}25% errors of measurement. However, fast ion confinement in NSTX is frequently affected by magnetohydrodynamic (MHD) activity, and the effect of MHD can be quite strong.

  17. Thermal shock experiment analysis, the use of crack arrest toughness measurements

    International Nuclear Information System (INIS)

    Miannay, D.; Pellissier-Tanon, A.; Chavaillard, J.P.

    1984-06-01

    The main purpose of thermal shock experiment is to assess the procedure codified in the ASME XI appendix 1 or RCC-M-B appendix ZG, and allow comparisons with numerical simulations. The analysis of the integrity of the PWR vessel belt line under accidental transients is based on reference curves. The test-piece is a cylinder of SA 508 cl.3 steel. Arrest toughness measured agrees with reference curve

  18. Meteorological measurements and simulations by the LORAN model performed during the ETEX experiments

    International Nuclear Information System (INIS)

    Schneiter, D.; Berger, H.; Galmarini, S.

    1997-01-01

    A SODAR (SOnic Detection and Ranging) installed by the SMA at the tracer release site (Monterfil near Rennes, France) was operating continuously during the two ETEX experiments (from 22nd to 25th Oct. and from 13th to 17th Nov. 1994). Vertical profiles of the horizontal and vertical components of the wind were measured every 20 m, from 20 m above ground up to 600 m, depending on the strength of the returned echoes. Samplings were averaged over 30 minutes

  19. Direct measurement of macroscopic electric fields produced by collective effects in electron-impact experiments

    International Nuclear Information System (INIS)

    Velotta, R.; Avaldi, L.; Camilloni, R.; Giammanco, F.; Spinelli, N.; Stefani, G.

    1996-01-01

    The macroscopic electric field resulting from the space charge produced in electron-impact experiments has been characterized by using secondary electrons of well-defined energy (e.g., Auger or autoionizing electrons) as a probe. It is shown that the measurement of the kinetic-energy shifts suffered by secondary electrons is a suitable tool for the analysis of the self-generated electric field in a low-density plasma. copyright 1996 The American Physical Society

  20. Benchmark experiment on vanadium assembly with D-T neutrons. Leakage neutron spectrum measurement

    Energy Technology Data Exchange (ETDEWEB)

    Kokooo; Murata, I.; Nakano, D.; Takahashi, A. [Osaka Univ., Suita (Japan); Maekawa, F.; Ikeda, Y.

    1998-03-01

    The fusion neutronics benchmark experiments have been done for vanadium and vanadium alloy by using the slab assembly and time-of-flight (TOF) method. The leakage neutron spectra were measured from 50 keV to 15 MeV and comparison were done with MCNP-4A calculations which was made by using evaluated nuclear data of JENDL-3.2, JENDL-Fusion File and FENDL/E-1.0. (author)

  1. FE-study for lithostatic pressure measurement in the 600 m borehole experiment

    International Nuclear Information System (INIS)

    Hamilton, L.F.M.; Benneker, P.B.J.M.

    1990-05-01

    In the Asse-2 salt mine an experiment is set up by ECN in the 600 m borehole to perform in-situ convergence measurements which can be used to validate or to determine the constitutive relations between stresses and deformations of the rocksalt. An experiment is planned in which the convergence of the borehole can be measured with different pressures created in the borehole. For this experiment a device has been developed at ECN which also will be used to measure the in-situ elasticity of the salt. This measuring device is designed in such a way that a pressure can be realized in the borehole and the deformation of the hole can be measured at the same time. In this report analyses are presented that are used to adjust the design of the pressure unit to the specific needs induced by the fact that the depth of the borehole is only 300 m due to drilling problems instead of the intended 600 m. Since the lithostatic pressure at this depth is smaller the convergence rate of the borehole is reduced. From the results presented in this report it can be concluded that it is not necessary to change the basic concept of the measurement as it was planned in the 600 m deep borehole. After the device has been placed into the borehole at a distance of 3 m from the bottom the empty space must be filled up with salt concrete up to 3 m above the pressure unit. In this way the interaction with the borehole bottom and the transition between the open and the filled borehole can be neglected. Some changes in the design are necessary to be able to measure the deformations of the borehole with enough accuracy. Based on these changes a measuring program has been defined in such a way that the experimental period is optimally used and the expected evolution of the volume change and pressure can be measured with enough accuracy. For three different constitutive models a prediction is made for the evolution of the pressure and the volume change resulting from the defined measuring program

  2. A Solution to Modeling Multilevel Confirmatory Factor Analysis with Data Obtained from Complex Survey Sampling to Avoid Conflated Parameter Estimates

    Directory of Open Access Journals (Sweden)

    Jiun-Yu Wu

    2017-09-01

    Full Text Available The issue of equality in the between-and within-level structures in Multilevel Confirmatory Factor Analysis (MCFA models has been influential for obtaining unbiased parameter estimates and statistical inferences. A commonly seen condition is the inequality of factor loadings under equal level-varying structures. With mathematical investigation and Monte Carlo simulation, this study compared the robustness of five statistical models including two model-based (a true and a mis-specified models, one design-based, and two maximum models (two models where the full rank of variance-covariance matrix is estimated in between level and within level, respectively in analyzing complex survey measurement data with level-varying factor loadings. The empirical data of 120 3rd graders' (from 40 classrooms perceived Harter competence scale were modeled using MCFA and the parameter estimates were used as true parameters to perform the Monte Carlo simulation study. Results showed maximum models was robust to unequal factor loadings while the design-based and the miss-specified model-based approaches produced conflated results and spurious statistical inferences. We recommend the use of maximum models if researchers have limited information about the pattern of factor loadings and measurement structures. Measurement models are key components of Structural Equation Modeling (SEM; therefore, the findings can be generalized to multilevel SEM and CFA models. Mplus codes are provided for maximum models and other analytical models.

  3. Measurements of Discrete Symmetries in the Neutral Kaon System with the CPLEAR (PS195) Experiment

    Science.gov (United States)

    Ruf, Thomas

    2015-07-01

    The antiproton storage ring LEAR offered unique opportunities to study the symmetries which exist between matter and antimatter. At variance with other approaches at this facility, CPLEAR was an experiment devoted to the study of T, \\{CPT} and \\{CP} symmetries in the neutral kaon system. It measured with high precision the time evolution of initially strangeness-tagged K0 and overline K ^0 states to determine the size of violations with respect to these symmetries in the context of a systematic study. In parallel, limits concerning quantum-mechanical predictions (EPR paradox, coherence of the wave function) or the equivalence principle of general relativity have been obtained. This article will first discuss briefly the unique low energy antiproton storage ring LEAR followed by a description of the CPLEAR experiment, including the basic formalism necessary to understand the time evolution of a neutral kaon state and the main results related to measurements of discrete symmetries in the neutral kaon system. An excellent and exhaustive review of the CPLEAR experiment and all its measurements is given in Ref. 1.

  4. On performance experience and measurements with Ningyo Waste Assay System (NWAS). 3

    International Nuclear Information System (INIS)

    Zaima, Naoki; Nakashima, Shin'ichi; Nakatsuka, Yoshiaki; Kado, Kazumi; Fujiki, Naoki

    2014-03-01

    A uranium mass assay system, NWAS (Ningyo Waste Assay System), for 200-litter wastes drums applied by NDA method was developed and accumulated the data of the actual uranium bearing wastes drums. The system consists of the 16 pieces of Helium-3 proportional counters for neutron detection generated from U-234(α,n) reaction or U-238 spontaneous fissions with polyethylene moderation and a Germanium solid state detector (Ge-SSD) for gamma ray detection as to determine uranium enrichment. In previous report, some measurement experiences had been introduced briefly. After that the measurements campaigns against the actual wastes drums stored in URCP had been carried out successfully, the uranium determination data of 850 drums had been accumulated approximately. Those characteristics were rich in variety including various kinds of matrices, uranium chemical compositions and range of uranium mass and so on. These works have contributed the decrease of the MUF in URCP, for which was the first purpose of introduction of NWAS. On the other hand several considerable problems on the system or methodology had been revealed technically or analytically through the measurements experiences. Such experiences are to be described precisely, in addition newly gained knowledge will be marshaled. Furthermore as the next improvement plans, the active neutrons assay for uranium bearing wastes drums are now progressing. The results of complications will lead us to the progressive next steps. (author)

  5. Reactivity worth measurements on the CALIBAN reactor: interpretation of integral experiments for the nuclear data validation

    International Nuclear Information System (INIS)

    Richard, B.

    2012-01-01

    The good knowledge of nuclear data, input parameters for the neutron transport calculation codes, is necessary to support the advances of the nuclear industry. The purpose of this work is to bring pertinent information regarding the nuclear data integral validation process. Reactivity worth measurements have been performed on the Caliban reactor, they concern four materials of interest for the nuclear industry: gold, lutetium, plutonium and uranium 238. Experiments which have been conducted in order to improve the characterization of the core are also described and discussed, the latter are necessary to the good interpretation of reactivity worth measurements. The experimental procedures are described with their associated uncertainties, measurements are then compared to numerical results. The methods used in numerical calculations are reported, especially the multigroup cross sections generation for deterministic codes. The modeling of the experiments is presented along with the associated uncertainties. This comparison led to an interpretation concerning the qualification of nuclear data libraries. Discrepancies are reported, discussed and justify the need of such experiments. (author) [fr

  6. Preliminary Hazard Classification for the Remediation of the 100-B/C Area Remaining Sites (Confirmatory Sampling Effort)

    International Nuclear Information System (INIS)

    Routt, T.M.

    2000-01-01

    This document provides the preliminary hazard classification for the sampling and characterization activities to be conducted at the 100-B/C confirmatory sampling effort sites in support of remedial design and eventual remediation of these sites

  7. Self-regulation and selective exposure: the impact of depleted self-regulation resources on confirmatory information processing.

    Science.gov (United States)

    Fischer, Peter; Greitemeyer, Tobias; Frey, Dieter

    2008-03-01

    In the present research, the authors investigated the impact of self-regulation resources on confirmatory information processing, that is, the tendency of individuals to systematically prefer standpoint-consistent information to standpoint-inconsistent information in information evaluation and search. In 4 studies with political and economic decision-making scenarios, it was consistently found that individuals with depleted self-regulation resources exhibited a stronger tendency for confirmatory information processing than did individuals with nondepleted self-regulation resources. Alternative explanations based on processes of ego threat, cognitive load, and mood were ruled out. Mediational analyses suggested that individuals with depleted self-regulation resources experienced increased levels of commitment to their own standpoint, which resulted in increased confirmatory information processing. In sum, the impact of ego depletion on confirmatory information search seems to be more motivational than cognitive in nature.

  8. Moisture measurement in the iron and steel industry: experience with nuclear moisture measurements in coke, and studies of infrared moisture measurement of iron ore mixtures

    International Nuclear Information System (INIS)

    Beumer, J.A.; Wouters, M.

    1976-01-01

    In the heavy iron-making industry there are several processes for which it is necessary to measure on-line the moisture content of certain process materials, especially in the field of iron ore preparation and blast furnace practice. Two examples are given. (1) Experience with nuclear moisture-measurements in coke covers a period of ten years in which eight measuring systems have been installed in the weighing hoppers of blast furnaces. The standard deviation is about 0.7% moisture in the range 0 to 15% moisture. The way the method is used, the safety measures and the difficulties encountered, especially the effect on recalibration of neutron-absorbing materials in photomultipliers are described. (2) The application of infrared absorption to the study of moisture measurment or iron ore mixtures is described. With an ore mixture for pellets manufacture, a rather dark ore mixture, problems have arisen concerning the sensitivity. The reference and measuring wavelengths now in use are 2.51 and 2.95 μm. In this case the absorption of the energy is rather high. The results may be improved by using quartz optics instead of the normal Pyrex ones, as the cut-off wavelength of Pyrex is about 3 μm. Variations due to colour and specific surface have been studied. As the accuracy required is +- 0.1% moisture in the range 8 to 12% moisture, these variations need to be eliminated. (author)

  9. Measuring general and specific stress causes and stress responses among beginning secondary school teachers in the Netherlands

    OpenAIRE

    Harmsen, R; Helms-Lorenz, M.; Maulana, R; van Veen, K; van Veldhoven, M.J.P.M.

    2018-01-01

    The main aim of this study was to adjust the Questionnaire on the Experience and Evaluation of Work (QEEW) in order to measure stress causes and stress responses of beginning secondary school teachers in the Netherlands. First, the suitability of the original QEEW stress scales for use in the beginning teachers (BTs) context was investigated using a sample of 356 beginning teachers from 52 different secondary school locations in the Netherlands. Confirmatory Factor Analyses, Principal Compone...

  10. Measuring general and specific stress causes and stress responses among beginning secondary school teachers in the Netherlands.

    OpenAIRE

    Harmsen, Ruth; Helms-Lorenz, Michelle; Maulana, Ridwan; van Veen, Klaas; van Veldhoven, M.J.P.M.

    2018-01-01

    The main aim of this study was to adjust the Questionnaire on the Experience and Evaluation of Work (QEEW) in order to measure stress causes and stress responses of beginning secondary school teachers in the Netherlands. First, the suitability of the original QEEW stress scales for use in the beginning teachers (BTs) context was investigated using a sample of 356 beginning teachers from 52 different secondary school locations in the Netherlands. Confirmatory Factor Analyses, Principal Compone...

  11. ELABORATING A MEASUREMENT INSTRUMENT FOR THE FLOW EXPERIENCE DURING ONLINE INFORMATION SEARCH

    Directory of Open Access Journals (Sweden)

    Caraivan Luiza

    2012-12-01

    Full Text Available Flow is a construct imported in marketing research from social sciences in order to examine consumer behavior in the online medium. The construct describes a state of deep involvement in a challenging activity, most frequently characterized by high levels of enjoyment, control and concentration. Researchers found that the degree to which online experience is challenging can be defined, measured, and related well to important marketing variables. As shown by our extensive literature review, flow measurements include antecedents, dimensions and consequences of flow. The present paper represents a detailed description of the construct`s operationalization in the context of online information search. In this respect, our main goal is to produce a basic instrument to evaluate the flow experience of online search, in order to capitalize on the premises of an interactive, complex informational medium – the World Wide Web – and on the consequence of an exploratory informational behavior of users. The instrument is conceived to offer a primal possibility to collect data. The composition, source and significance of the 11 scales used to measure the multiple factors of the flow experience during online search are detailed in this study with the aim to ensure the compliance with scientific rigors and to facilitate correct reports of data related to the reliability and validity of measurements. For further research, we propose factor analysis to test the resulted instrument and to ensure that the measures employed are psychometrically sound. Factor analysis refers to a wide range of statistic techniques used to represent a set of variables in concordance with a reduced number of hypothetical variables called factors. Factorial analysis is used to solve two types of problems: reducing the number of variables to increase data processing speed and identifying hidden patterns in the existent data relations. However, we expect our scales to perform

  12. SFINX: Soviet-French integral experiment on measuring the capture and fission at Masurca and BFS

    International Nuclear Information System (INIS)

    Doulin, V.A.; Mikhailov, J.M.; Mozhaev, V.K.

    1990-01-01

    The SFINX experiment was aimed at the comparison of experimental procedures used at the MASURCA and the BFS critical assemblies for measuring the ratio of the 238 U and 239 Pu average fission cross-sections to the 235 U average cross-section (F8/F5, F9/F5) and of the 238 U average capture cross-section to the 239 Pu average fission cross section (C8/F9). As part of the calibration of the measurements F8/F5 and F9/F5 were also measured in a thermal column. To obtain C8/F9, absolute measurements of capture rates in 238 U and fission rates in 239 Pu and 235 U were carried out. The measurements were made in September 1987 at the MASURCA facility (FRANCE) in the BALZAC 1 critical assembly and in the thermal column of the HARMONIE facility. In April 1989 these measurements were complemented by joint measurements of the 239 Pu absolute fission rate at the BFS 55-1 critical assembly (USSR)

  13. Confirmatory Survey Results for the Reactor Building Dome Upper Structural Surfaces, Rancho Saco Nuclear Generating Station, Herald, California

    International Nuclear Information System (INIS)

    Wade C. Adams

    2006-01-01

    Results from a confirmatory survey of the upper structural surfaces of the Reactor Building Dome at the Rancho Seco Nuclear Generating Station (RSNGS) performed by the Oak Ridge Institute for Science and Education for the NRC. Also includes results of interlaboratory comparison analyses on several archived soil samples that would be provided by RSNGS personnel. The confirmatory surveys were performed on June 7 and 8, 2006

  14. The independence of schizotypy from affective temperaments--a combined confirmatory factor analysis of SPQ and the short TEMPS-A.

    Science.gov (United States)

    Preti, Antonio; Corrias, Irene; Gabbrielli, Mersia; Lai, Veronica; Muratore, Tamara; Pintus, Elisa; Pintus, Mirra; Sanna, Sara; Scanu, Rosanna; Tronci, Debora; Vellante, Marcello; Siddi, Sara; Petretto, Donatella Rita; Carta, Mauro Giovanni

    2015-01-30

    Sparse evidence of a co-aggregation of the risk of schizophrenia and bipolar disorder provides support for a shared but nonspecific genetic etiology of bipolar disorder and schizophrenia. Temperaments are conceptualized as trait sub-syndromic conditions of major pathologies. This study set out to test the hypothesis of a continuum between schizotypy and affective temperaments versus the alternative hypothesis of their independence based on a cross-sectional, survey design involving 649 (males: 47%) college students. The short 39-item TEMPS-A and the SPQ were used as measures of the affective temperaments and of schizotypy, respectively. Confirmatory factor analyses were applied to a unidimensional model, to a standard correlate traits model, to second-order representations of a common latent structure, and to a bifactor model. Confirmatory bifactor modeling provided evidence against a complete independence of the dimensions subsumed by the affective and the schizotypal traits. The best solution distinguished between two sub-domains grouping positive symptoms and negative symptoms as measured by the SPQ subscales, and a sub-domain related to the affective temperaments as measured by the TEMPS-A. Limitations due to the use of subscales from two different tools should be taken into account. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. TRitium Activity Measurements with a PhotomultipliEr in Liquids–The TRAMPEL experiment

    International Nuclear Information System (INIS)

    Priester, Florian; Klein, Manuel

    2016-01-01

    Highlights: • We have set up a new test device for measuring of tritiated water samples. • The device is very compact and easy and reliable in operation. • Easy integration in flow-through systems is possible. • The device has been operated at Tritium Laboratory Karlsruhe for several months. • The lower detection limit has been improved with regard to predecessors experiments. - Abstract: A common technique for the determination of the activity of tritiated water (HTO) is liquid scintillation counting (LSC). This implies sample taking, sample preparation and radioactive waste processing afterwards. When handling highly tritiated water special care has to be taken because of possible harmfulness of the sample. Furthermore, LSC devices are mostly large, heavy and expensive. The TRAMPEL experiment aims at measuring the activity of tritiated water in-line without sample taking. The device is intended to be easy to use and operate, quite inexpensive and compact. The measurement principle is based on electrons from β-decay which induce light in commercially available scintillation fibres. The light is detected by a small photomultiplier tube (PMT). A proof-of-principle was set up for static measurements using standard stainless steel parts. The complete device has a volume of less than 0.5 l.

  16. Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

    Science.gov (United States)

    Reed, G; Reed, D H

    1999-05-01

    When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data.

  17. Measurement of Drug Craving in Persian Speaking Subjects; a Review on Current Experiences and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Masoomeh Maarefvand

    2012-09-01

    Full Text Available Background: Drug craving is considered as one of the main cores of drug dependency and addiction. Multidimensionality of drug craving, its cultural-bounded features and its intra individual rapidly changing nature makes it difficult to be measured. Nowadays, regarding different psychometric approaches, there are various instruments available for measurement of different aspects of drug craving but mainly for Latin-based languages in North America and European countries. High prevalence and special conditions, and unique subcultures in substance abuse and addiction in many countries, like Iran, make the design of culturally validated instruments for drug craving assessment priority. Materials and Methods: Comprehensive review on drug craving measurement instruments for Persian speaking subjects have been performed by searching in databases (ELSEVIER, Science Direct and Scientific Information Database (SID and investigating of related documents on regional experiences. Results: In this article seven main categories of drug craving instruments have been reviewed focusing on validated versions in Persian language including: self-reports, reinforcement “proxies”, drug self administration, psycho physiological responding, neurobiological responding, cognitive processing and expressive methods. Conclusion: Reviewing on weak and strength points of each instrument group and national and regional experiences shows that designing and validating a new series of ecologically-validated instruments for multidimensional measurement of drug craving in different addiction subcultures should be prioritized to cover current methodological gaps in substance abuse studies in Iran.

  18. TRitium Activity Measurements with a PhotomultipliEr in Liquids–The TRAMPEL experiment

    Energy Technology Data Exchange (ETDEWEB)

    Priester, Florian, E-mail: florian.priester@kit.edu; Klein, Manuel

    2016-11-01

    Highlights: • We have set up a new test device for measuring of tritiated water samples. • The device is very compact and easy and reliable in operation. • Easy integration in flow-through systems is possible. • The device has been operated at Tritium Laboratory Karlsruhe for several months. • The lower detection limit has been improved with regard to predecessors experiments. - Abstract: A common technique for the determination of the activity of tritiated water (HTO) is liquid scintillation counting (LSC). This implies sample taking, sample preparation and radioactive waste processing afterwards. When handling highly tritiated water special care has to be taken because of possible harmfulness of the sample. Furthermore, LSC devices are mostly large, heavy and expensive. The TRAMPEL experiment aims at measuring the activity of tritiated water in-line without sample taking. The device is intended to be easy to use and operate, quite inexpensive and compact. The measurement principle is based on electrons from β-decay which induce light in commercially available scintillation fibres. The light is detected by a small photomultiplier tube (PMT). A proof-of-principle was set up for static measurements using standard stainless steel parts. The complete device has a volume of less than 0.5 l.

  19. Spectroscopic measurements of plasma emission light for plasma-based acceleration experiments

    International Nuclear Information System (INIS)

    Filippi, F.; Mostacci, A.; Palumbo, L.; Anania, M.P.; Biagioni, A.; Chiadroni, E.; Ferrario, M.; Cianchi, A.; Zigler, A.

    2016-01-01

    Advanced particle accelerators are based on the excitation of large amplitude plasma waves driven by either electron or laser beams. Future experiments scheduled at the SPARC-LAB test facility aim to demonstrate the acceleration of high brightness electron beams through the so-called resonant Plasma Wakefield Acceleration scheme in which a train of electron bunches (drivers) resonantly excites wakefields into a preformed hydrogen plasma; the last bunch (witness) injected at the proper accelerating phase gains energy from the wake. The quality of the accelerated beam depends strongly on plasma density and its distribution along the acceleration length. The measurements of plasma density of the order of 10 16 –10 17  cm −3 can be performed with spectroscopic measurements of the plasma-emitted light. The measured density distribution for hydrogen filled capillary discharge with both Balmer alpha and Balmer beta lines and shot-to-shot variation are here reported.

  20. Spectroscopic measurements of plasma emission light for plasma-based acceleration experiments

    Science.gov (United States)

    Filippi, F.; Anania, M. P.; Biagioni, A.; Chiadroni, E.; Cianchi, A.; Ferrario, M.; Mostacci, A.; Palumbo, L.; Zigler, A.

    2016-09-01

    Advanced particle accelerators are based on the excitation of large amplitude plasma waves driven by either electron or laser beams. Future experiments scheduled at the SPARC_LAB test facility aim to demonstrate the acceleration of high brightness electron beams through the so-called resonant Plasma Wakefield Acceleration scheme in which a train of electron bunches (drivers) resonantly excites wakefields into a preformed hydrogen plasma; the last bunch (witness) injected at the proper accelerating phase gains energy from the wake. The quality of the accelerated beam depends strongly on plasma density and its distribution along the acceleration length. The measurements of plasma density of the order of 1016-1017 cm-3 can be performed with spectroscopic measurements of the plasma-emitted light. The measured density distribution for hydrogen filled capillary discharge with both Balmer alpha and Balmer beta lines and shot-to-shot variation are here reported.

  1. Experiences on current national income measures with reference to environmental and natural resources

    International Nuclear Information System (INIS)

    Franzese, R.; Gaudioso, D.

    1995-06-01

    The environment provides both a source of goods and services and a 'sink' for residues of the production and consumption processes. This is not reflected into conventional estimate of GDP (gross domestic product), the most commonly used measure of aggregate income. The purpose of this paper is to explore whether environmentally-adjusted national income measure can be derived. In the first part, the authors discuss both the shortcomings of the current national income measures, with reference to environmental and natural resources, and the debate on this issues; then they analyse the existing experiences to provide environmentally-adjusted indicators of national accounts. In the second part, the authors present an evaluation of the costs of environmental degradation in Italy in the period 1988-1990, based on the methodologies adopted in a pilot study carried out by UNSO (United Nations Statistical Office) and the World Bank for Mexico

  2. Measurement of the luminosity in the ZEUS experiment at HERA II

    Energy Technology Data Exchange (ETDEWEB)

    Adamczyk, L.; Bold, T. [AGH Univ. of Science and Technology, Cracow (Poland); Andruszkow, J. [Polish Academy of Sciences, Cracow (Poland). Inst. of Nuclear Physics] [and others

    2013-06-15

    The luminosity in the ZEUS detector was measured using photons from electron bremsstrahlung. In 2001 the HERA collider was upgraded for operation at higher luminosity. At the same time the luminosity-measuring system of the ZEUS experiment was modified to tackle the expected higher photon rate and synchrotron radiation. The existing lead-scintillator calorimeter was equipped with radiation hard scintillator tiles and shielded against synchrotron radiation. In addition, a magnetic spectrometer was installed to measure the luminosity independently using photons converted in the beam-pipe exit window. The redundancy provided a reliable and robust luminosity determination with a systematic uncertainty of 1.7%. The experimental setup, the techniques used for luminosity determination and the estimate of the systematic uncertainty are reported.

  3. Energy spectra and charge composition of galactic cosmic rays measured in ATIC-2 experiment

    International Nuclear Information System (INIS)

    Zatsepin, V.I.; Bat'kov, K.E.; Bashindzhagyan, G.L.

    2004-01-01

    The ATIC (Advanced Thin Ionization Calorimeter) balloon experiment is intended for measuring the energy spectra of the galactic cosmic rays with the individual resolution by the charge from protons to iron within the energy range from 50 GeV up to 100 TeV. The silicon detector matrix, making it possible to solve on the inverse current by means of the detector charge high segmentation, was applied for the first time in the high-energy cosmic rays for the charge measurement. The ATIC completed two successful flights in the Antarctica since 28.12.2000 up to 13.01.2001 (the ATIC-1 test flight) and since 29.12.2002 up to 18.01.2003 (the ATIC-2 scientific flight). The current state of the analysis of the spectra, measured in the ATIC-2 scientific flight, are presented in this work and the obtained results are compared with the model forecasts results [ru

  4. Measuring the Change in Water Table with Gravity Methods - a Controlled Experiment

    DEFF Research Database (Denmark)

    Lund, S; Christiansen, Lars; Andersen, O. B.

    2009-01-01

    Gravity changes linearly with the change in soil water content. With the GRACE satellite mission the interest for ground-based gravity methods in hydrology has gained new attention. Time-lapse gravity data have the potential to constrain hydrological model parameters in a calibration scheme....... The greatest potential is seen for specific yield. The gravity signal from hydrology is small (10^-8 m/s^2 level) and the application of ground-based methods is mainly limited by the sensitivity of available instruments. In order to demonstrate the ability of the Scintrex CG-5 gravity meter to detect a change...... in water content, a controlled experiment was set up in 30 m by 20 m basin. The water table was lowered 0.69 m within 1½ hours and the corresponding gravity signal measured using two different approaches: a time series measurements at one location and a gravity network measurement including four points...

  5. A survey of blockage measurement methods used in PWR multi-rod experiments

    Energy Technology Data Exchange (ETDEWEB)

    Hindle, E.D.; Jones, C.; Whitty, S. (AEA Reactor Services, Springfield (UK))

    1986-05-01

    The deformation characteristics of Zircaloy multi-rod arrays are being investigated in laboratory and in-reactor tests, and heat transfer experiments are being carried out on pre-deformed arrays. The primary objective is to demonstrate that cladding distension occurring under hypothetical loss-of-coolant accident (LOCA) conditions will not impede the PWR emergency coolant flow during the reflood stage to the extent that unacceptably high cladding temperatures are reached, i.e. that a coolable geometry is maintained. This Report critically reviews the current methods for measuring blockage in multi-rod arrays and discusses their application. A new definition which overcomes the deficiencies of the previous methods is proposed even though it still has drawbacks in the case of overall blockage measurement. A method for automatically measuring the individual rod strain, general cluster blockage sub-channel blockage and sub-channel perimeter changes is described and the results from a deformed array presented. (author).

  6. A survey of blockage measurement methods used in PWR multi-rod experiments

    International Nuclear Information System (INIS)

    Hindle, E.D.; Jones, C.; Whitty, S.

    1986-05-01

    The deformation characteristics of Zircaloy multi-rod arrays are being investigated in laboratory and in-reactor tests, and heat transfer experiments are being carried out on pre-deformed arrays. The primary objective is to demonstrate that cladding distension occurring under hypothetical loss-of-coolant accident (LOCA) conditions will not impede the PWR emergency coolant flow during the reflood stage to the extent that unacceptably high cladding temperatures are reached, i.e. that a coolable geometry is maintained. This Report critically reviews the current methods for measuring blockage in multi-rod arrays and discusses their application. A new definition which overcomes the deficiencies of the previous methods is proposed even though it still has drawbacks in the case of overall blockage measurement. A method for automatically measuring the individual rod strain, general cluster blockage sub-channel blockage and sub-channel perimeter changes is described and the results from a deformed array presented. (author)

  7. Non-destructive measurements of nuclear wastes. Validation and industrial operating experience

    International Nuclear Information System (INIS)

    Saas, A.; Tchemitciieff, E.

    1993-01-01

    After a short survey of the means employed for the non-destructive measurement of specific activities (γ and X-ray) in waste packages and raw waste, the performances of the device and the ANDRA requirements are presented. The validation of the γ and X-ray measurements on packages is obtained through determining, by destructive means, the same activity on coring samples. The same procedure is used for validating the homogeneity measurements on packages (either homogeneous or heterogeneous). Different operating experiences are then exposed for several kinds of packages and waste. Up to now, about twenty different types of packages have been examined and more than 200 packages have allowed the calibration, validation, and control

  8. Vibrational-rotational temperature measurement of N2 in the lower thermosphere by the rocket experiment

    Science.gov (United States)

    Kurihara, J.; Oyama, K.; Suzuki, K.; Iwagami, N.

    The vibrational temperature (Tv), the rotational temperature (Tr) and the density of atmospheric N2 between 100 - 150 km were measured in situ by a sounding rocket S310-30, over Kagoshima, Japan at 10:30 UT on February 6, 2002. The main purpose of this rocket experiment is to study the dynamics and the thermal energy budget in the lower thermosphere. N2 was ionized using an electron gun and the emission of the 1st negative bands of N2+ was measured by a sensitive spectrometer. Tv and Tr were determined by fitting the observed spectrum for the simulated spectrum, and the number density was deduced from the intensities of the spectrum. We will report preliminary results of our measurement and discuss the observed thermal structure that indicates the effect of tides and gravity waves.

  9. The Indianapolis Flux Experiment (INFLUX: A test-bed for developing urban greenhouse gas emission measurements

    Directory of Open Access Journals (Sweden)

    Kenneth J. Davis

    2017-05-01

    Full Text Available The objective of the Indianapolis Flux Experiment (INFLUX is to develop, evaluate and improve methods for measuring greenhouse gas (GHG emissions from cities. INFLUX’s scientific objectives are to quantify CO2 and CH4 emission rates at 1 km2 resolution with a 10% or better accuracy and precision, to determine whole-city emissions with similar skill, and to achieve high (weekly or finer temporal resolution at both spatial resolutions. The experiment employs atmospheric GHG measurements from both towers and aircraft, atmospheric transport observations and models, and activity-based inventory products to quantify urban GHG emissions. Multiple, independent methods for estimating urban emissions are a central facet of our experimental design. INFLUX was initiated in 2010 and measurements and analyses are ongoing. To date we have quantified urban atmospheric GHG enhancements using aircraft and towers with measurements collected over multiple years, and have estimated whole-city CO2 and CH4 emissions using aircraft and tower GHG measurements, and inventory methods. Significant differences exist across methods; these differences have not yet been resolved; research to reduce uncertainties and reconcile these differences is underway. Sectorally- and spatially-resolved flux estimates, and detection of changes of fluxes over time, are also active research topics. Major challenges include developing methods for distinguishing anthropogenic from biogenic CO2 fluxes, improving our ability to interpret atmospheric GHG measurements close to urban GHG sources and across a broader range of atmospheric stability conditions, and quantifying uncertainties in inventory data products. INFLUX data and tools are intended to serve as an open resource and test bed for future investigations. Well-documented, public archival of data and methods is under development in support of this objective.

  10. Measurements of radial profiles of ion cyclotron resonance heating on the Tandem Mirror Experiment-Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Falabella, S.

    1988-05-11

    A small Radial Energy Analyzer (REA) was used on the Tandem Mirror Experiment-Upgrade (TMX-U), at Lawerence Livermore National Laboratory, to investigate the radial profiles of ion temperature, density, and plasma potential during Ion Cyclotron Resonance Heating (ICRH). The probe has been inserted into the central-cell plasma at temperatures of 200 eV and densities of 3 x 10/sup 12/cm/sup /minus 3// without damage to the probe, or major degradation of the plasma. This analyzer has indicated an increase in ion temperature from near 20 eV before ICRH to near 150 eV during ICRH, with about 60 kW of broadcast power. The REA measurements were cross-checked against other diagnostics on TMX-U and found to be consistent. The ion density measurement was compared to the line-density measured by microwave interferometry and found to agree within 10 to 20%. A radial intergral of n/sub i/T/sub i/ as measured by the REA shows good agreement with the diamagnetic loop measurement of plasma energy. The radial density profile is observed to broaden during the RF heating pulses, without inducing additional radial losses in the core plasma. The radial profile of plasma is seen to vary from axially peaked, to nearly flat as the plasma conditions carried over the series of experiments. To relate the increase in ion temperature to power absorbed by the plasma, a power balance as a function of radius was performed. The RF power absorbed is set equal to the sum of the losses during ICRH, minus those without ICRH. This method accounts for more than 70% of the broadcast power using a simple power balance model. The measured radial profile of the RF heating was compared to the calculations of two codes, ANTENA and GARFIELD, to test their effectiveness as predictors of power absorption profiles for TMX-U. 62 refs., 63 figs., 7 tabs.

  11. Measurements of radial profiles of ion cyclotron resonance heating on the Tandem Mirror Experiment-Upgrade

    International Nuclear Information System (INIS)

    Falabella, S.

    1988-01-01

    A small Radial Energy Analyzer (REA) was used on the Tandem Mirror Experiment-Upgrade (TMX-U), at Lawerence Livermore National Laboratory, to investigate the radial profiles of ion temperature, density, and plasma potential during Ion Cyclotron Resonance Heating (ICRH). The probe has been inserted into the central-cell plasma at temperatures of 200 eV and densities of 3 x 10 12 cm/sup /minus 3// without damage to the probe, or major degradation of the plasma. This analyzer has indicated an increase in ion temperature from near 20 eV before ICRH to near 150 eV during ICRH, with about 60 kW of broadcast power. The REA measurements were cross-checked against other diagnostics on TMX-U and found to be consistent. The ion density measurement was compared to the line-density measured by microwave interferometry and found to agree within 10 to 20%. A radial intergral of n/sub i/T/sub i/ as measured by the REA shows good agreement with the diamagnetic loop measurement of plasma energy. The radial density profile is observed to broaden during the RF heating pulses, without inducing additional radial losses in the core plasma. The radial profile of plasma is seen to vary from axially peaked, to nearly flat as the plasma conditions carried over the series of experiments. To relate the increase in ion temperature to power absorbed by the plasma, a power balance as a function of radius was performed. The RF power absorbed is set equal to the sum of the losses during ICRH, minus those without ICRH. This method accounts for more than 70% of the broadcast power using a simple power balance model. The measured radial profile of the RF heating was compared to the calculations of two codes, ANTENA and GARFIELD, to test their effectiveness as predictors of power absorption profiles for TMX-U. 62 refs., 63 figs., 7 tabs

  12. FIREX (Fire Influence on Regional and Global Environments Experiment): Measurements of Nitrogen Containing Volatile Organic Compounds

    Science.gov (United States)

    Warneke, C.; Schwarz, J. P.; Yokelson, R. J.; Roberts, J. M.; Koss, A.; Coggon, M.; Yuan, B.; Sekimoto, K.

    2017-12-01

    A combination of a warmer, drier climate with fire-control practices over the last century have produced a situation in which we can expect more frequent fires and fires of larger magnitude in the Western U.S. and Canada. There are urgent needs to better understand the impacts of wildfire and biomass burning (BB) on the atmosphere and climate system, and for policy-relevant science to aid in the process of managing fires. The FIREX (Fire Influence on Regional and Global Environment Experiment) research effort is a multi-year, multi-agency measurement campaign focused on the impact of BB on climate and air quality from western North American wild fires, where research takes place on scales ranging from the flame-front to the global atmosphere. FIREX includes methods development and small- and large-scale laboratory and field experiments. FIREX will include: emission factor measurements from typical North American fuels in the fire science laboratory in Missoula, Montana; mobile laboratory deployments; ground site measurements at sites influenced by BB from several western states. The main FIREX effort will be a large field study with multiple aircraft and mobile labs in the fire season of 2019. One of the main advances of FIREX is the availability of various new measurement techniques that allows for smoke evaluation in unprecedented detail. The first major effort of FIREX was the fire science laboratory measurements in October 2016, where a large number of previously understudied Nitrogen containing volatile organic compounds (NVOCs) were measured using H3O+CIMS and I-CIMS instruments. The contribution of NVOCs to the total reactive Nitrogen budget and the relationship to the Nitrogen content of the fuel are investigated.

  13. Measurements of radial profiles of ion cyclotron resonance heating on the tandem mirror experiment

    International Nuclear Information System (INIS)

    Falabella, S.

    1988-01-01

    A small Radial Energy Analyzer (REA) was used on the Tandem Mirror Experiment-Upgrade (TMX-U), at Lawrence Livermore National Laboratory, to investigate the radial profiles of ion temperature, density, and plasma potential during Ion Cyclotron Resonance Heating (ICRH). This analyzer indicates an increase in ion temperature from ∼20 eV before ICRH to ∼150 eV during ICRH, with ∼60 kW of broadcast power. The REA measurements were cross-checked against other diagnostics on TMX-U and found to be consistent. The ion density measurement was compared to the line-density measured by microwave interferometry and found to agree within 10 to 20%. A radial integral of n i T i as measured by the REA shows good agreement with the diamagnetic loop measurement of plasma energy. The radial density profile is observed to broaden during the RF heating pulses, without inducing additional radial losses in the core plasma. The radial profile of plasma potential is seen to vary from axially peaked, to nearly flat, as the plasma conditions varied over the series of experiments. To relate the increase in ion temperature to power absorbed by the plasma, a power balance as a function of radius was performed. The RF power absorbed is set equal to the sum of the losses during ICRH, minus those without ICRH. This method accounts for more than 70% of the broadcast power using a simple power balance model. The measured radial profile of the RF heating was compared to the calculations of two codes, ANTENA and GARFIELD, to test their effectiveness as predictors of power absorption profiles for TMX-U

  14. Case-mix adjustment and the comparison of community health center performance on patient experience measures.

    Science.gov (United States)

    Johnson, M Laura; Rodriguez, Hector P; Solorio, M Rosa

    2010-06-01

    To assess the effect of case-mix adjustment on community health center (CHC) performance on patient experience measures. A Medicaid-managed care plan in Washington State collected patient survey data from 33 CHCs over three fiscal quarters during 2007-2008. The survey included three composite patient experience measures (6-month reports) and two overall ratings of care. The analytic sample includes 2,247 adult patients and 2,859 adults reporting for child patients. We compared the relative importance of patient case-mix adjusters by calculating each adjuster's predictive power and variability across CHCs. We then evaluated the impact of case-mix adjustment on the relative ranking of CHCs. Important case-mix adjusters included adult self-reported health status or parent-reported child health status, adult age, and educational attainment. The effects of case-mix adjustment on patient reports and ratings were different in the adult and child samples. Adjusting for race/ethnicity and language had a greater impact on parent reports than adult reports, but it impacted ratings similarly across the samples. The impact of adjustment on composites and ratings was modest, but it affected the relative ranking of CHCs. To ensure equitable comparison of CHC performance on patient experience measures, reports and ratings should be adjusted for adult self-reported health status or parent-reported child health status, adult age, education, race/ethnicity, and survey language. Because of the differential impact of case-mix adjusters for child and adult surveys, initiatives should consider measuring and reporting adult and child scores separately.

  15. Comparison of Finite Element Predictions to Measurements from the Sandia Microslip Experiment

    Energy Technology Data Exchange (ETDEWEB)

    LOBITZ,DONALD W.; GREGORY,DANNY LYNN; SMALLWOOD,DAVID O.

    2000-11-09

    When embarking on an experimental program for purposes of discovery and understanding, it is only prudent to use appropriate analysis tools to aid in the discovery process. Due to the limited scope of experimental measurement analytical results can significantly complement the data after a reasonable validation process has occurred. In this manner the analytical results can help to explain certain measurements, suggest other measurements to take and point to possible modifications to the experimental apparatus. For these reasons it was decided to create a detailed nonlinear finite element model of the Sandia Microslip Experiment. This experiment was designed to investigate energy dissipation due to microslip in bolted joints and to identify the critical parameters involved. In an attempt to limit the microslip to a single interface a complicated system of rollers and cables was devised to clamp the two slipping members together with a prescribed normal load without using a bolt. An oscillatory tangential load is supplied via a shaker. The finite element model includes the clamping device in addition to the sequence of steps taken in setting up the experiment. The interface is modeled using Coulomb friction requiring a modest validation procedure for estimating the coefficient of friction. Analysis results have indicated misalignment problems in the experimental procedure, identified transducer locations for more accurate measurements, predicted complex interface motions including the potential for galling, identified regions where microslip occurs and during which parts of the loading cycle it occurs, all this in addition to the energy dissipated per cycle. A number of these predictions have been experimentally corroborated in varying degrees and are presented in the paper along with the details of the finite element model.

  16. Analysis of measurements for a uranium-free core experiment at the BFS-2 critical assembly

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, Stuart [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1999-04-01

    This document describes a series of calculations that were carried out to model various measurements from the BFS-58-1-I1 experiment. BFS-58-1-I1 was a mock-up of a uranium-free, Pu burning core at BFS-2, a Russian critical assembly operated by IPPE. The experiment measured values of Keff, Na void reactivity worth, material sample reactivity worths and reaction rate ratios. The experiments were modelled using a number of different methods. Basic nuclear data was taken from JENDL-3.2, in either 70 or 18 groups. Cross-section data for the various material regions of the assembly were calculated by either SLAROM or CASUP; the heterogeneous structure of the core regions was modelled in these calculations, with 3 different options considered for representing the (essentially 2D) geometry of the assembly components in a 1D cell model. Whole reactor calculations of flux and Keff were done using both a diffusion model (CITATION) and a transport model (TWOTRAN2), both using an RZ geometry. Reactivity worths were calculated both directly from differences in Keff values and by using the exact perturbation calculations of PERKY and SN-PERT (for CITATION and TWOTRAN2, respectively). Initial calculations included a number of inaccuracies in the assembly representation, a result of communication difficulties between JNC and IPPE; these errors were removed for the final calculations that are presented. Calculations for the experiments have also been carried out in Russia (IPPE) and France (CEA) as part of an international comparison exercise, some of those results are also presented here. The calculated value of Keff was 1.1%{delta}k/k higher than the measured value, Na void worth C/E values were {approx}1.06; these results were considered to be reasonable. (Discrepancies in certain Na void values were probably due to experimental causes , though the effect should be investigated in any future experiments.) Several sample worth values were small compared with calculational

  17. Experience with novel technologies for direct measurement of atmospheric NO2

    Science.gov (United States)

    Hueglin, Christoph; Hundt, Morten; Mueller, Michael; Schwarzenbach, Beat; Tuzson, Bela; Emmenegger, Lukas

    2017-04-01

    Nitrogen dioxide (NO2) is an air pollutant that has a large impact on human health and ecosystems, and it plays a key role in the formation of ozone and secondary particulate matter. Consequently, legal limit values for NO2 are set in the EU and elsewhere, and atmospheric observation networks typically include NO2 in their measurement programmes. Atmospheric NO2 is principally measured by chemiluminescence detection, an indirect measurement technique that requires conversion of NO2 into nitrogen monoxide (NO) and finally calculation of NO2 from the difference between total nitrogen oxides (NOx) and NO. Consequently, NO2 measurements with the chemiluminescence method have a relatively high measurement uncertainty and can be biased depending on the selectivity of the applied NO2 conversion method. In the past years, technologies for direct and selective measurement of NO2 have become available, e.g. cavity attenuated phase shift spectroscopy (CAPS), cavity enhanced laser absorption spectroscopy and quantum cascade laser absorption spectrometry (QCLAS). These technologies offer clear advantages over the indirect chemiluminescence method. We tested the above mentioned direct measurement techniques for NO2 over extended time periods at atmospheric measurement stations and report on our experience including comparisons with co-located chemiluminescence instruments equipped with molybdenum as well as photolytic NO2 converters. A still open issue related to the direct measurement of NO2 is instrument calibration. Accurate and traceable reference standards and NO2 calibration gases are needed. We present results from the application of different calibration strategies based on the use of static NO2 calibration gases as well as dynamic NO2 calibration gases produced by permeation and by gas-phase titration (GPT).

  18. Understanding the contamination of food with mineral oil: the need for a confirmatory analytical and procedural approach.

    Science.gov (United States)

    Spack, Lionel W; Leszczyk, Gabriela; Varela, Jesus; Simian, Hervé; Gude, Thomas; Stadler, Richard H

    2017-06-01

    The contamination of food by mineral oil hydrocarbons (MOHs) found in packaging is a long-running concern. A main source of MOHs in foods is the migration of mineral oil from recycled board into the packed food products. Consequently, the majority of food manufacturers have taken protective measures, e.g., by using virgin board instead of recycled fibres and, where feasible, introducing functional barriers to mitigate migration. Despite these protective measures, MOHs may still be observed in low amounts in certain food products, albeit due to different entry points across the food supply chain. In this study, we successfully apply gas chromatography coupled to mass spectrometry (GC-MS) to demonstrate, through marker compounds and the profile of the hydrocarbon response, the possible source of contamination using mainly chocolate and cereals as food matrices. The conventional liquid chromatography-one-dimensional GC coupled to a flame ionisation detector (LC-GC-FID) is a useful screening method, but in cases of positive samples it must be complemented by a confirmatory method such as, for example, GC-MS, allowing a verification of mineral oil contamination. The procedural approach proposed in this study entails profile analysis, marker identification, and interpretation and final quantification.

  19. Validation of the Spanish version of the Drive for Muscularity Scale (DMS) among males: Confirmatory factor analysis.

    Science.gov (United States)

    Sepulveda, Ana R; Parks, Melissa; de Pellegrin, Yolanda; Anastasiadou, Dimitra; Blanco, Miriam

    2016-04-01

    Drive for Muscularity (DM) has been shown to be a relevant construct for measuring and understanding male body image. For this reason, it is important to have reliable and valid instruments with which to measure DM, and to date no such instruments exist in Spain. This study analyzes the psychometric and structural properties of the Drive for Muscularity Scale (DMS) in a sample of Spanish adolescent males (N=212), with the aim of studying the structural validity of the scale by using a confirmatory factor analysis (CFA), as well as analyzing the internal consistency and construct (convergent and discriminant) and concurrent validity of the instrument. After testing three models, results indicated that the best structure was a two-dimensional model, with the factors of muscularity-oriented body image (MBI) and muscularity behavior (MB). The scale showed good internal consistency (α=.90) and adequate construct validity. Furthermore, significant associations were found between DM and increased difficulties in emotional regulation (rho=.37) and low self-esteem (rho=-.19). Findings suggest that the two-factor structure may be used when assessing drive for muscularity among adolescent males in Spain. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Baryon stopping contribution in net-proton fluctuations measured by STAR experiment

    International Nuclear Information System (INIS)

    Thakur, Dhananjaya; Jakhar, Sunil; Garg, Prakhar; Sahoo, Raghunath

    2016-01-01

    The main goal of Beam Energy Scan program by RHIC is to scan the QCD phase diagram i.e temperature (T) versus baryon chemical potential (μB) diagram for strong interaction. At large B existence of QCD critical point (CP) and a first order phase boundary between QGP and hadronic phase is expected. The non-monotonous behavior of higher moment of the distributions of conserved quantity like net-baryon number with √s_N_N are believed to be a good signature of phase transition and CP. A non-monotonous behavior of ĸσ"2 is found around √s_N_N = 19.6 GeV by STAR experiment, which hints for the possible existence of critical point around √s_N_N=19.6 GeV. The proton distributions measured by STAR experiment have the contribution from both production as well as stopping. There may be a significant contribution of stopped protons at RHIC and lower energies which also relate to the softening of the equation of state. In the present work we have estimated the contribution of stopped protons in the protons multiplicity distributions measured by STAR experiment to calculate the higher order fluctuations

  1. Modeling and design of radiative hydrodynamic experiments with X-ray Thomson Scattering measurements on NIF

    Science.gov (United States)

    Ma, K. H.; Lefevre, H. J.; Belancourt, P. X.; MacDonald, M. J.; Doeppner, T.; Keiter, P. A.; Kuranz, C. C.; Johnsen, E.

    2017-10-01

    Recent experiments at the National Ignition Facility studied the effect of radiation on shock-driven hydrodynamic instability growth. X-ray radiography images from these experiments indicate that perturbation growth is lower in highly radiative shocks compared to shocks with negligible radiation flux. The reduction in instability growth is attributed to ablation from higher temperatures in the foam for highly radiative shocks. The proposed design implements the X-ray Thomson Scattering (XRTS) technique in the radiative shock tube platform to measure electron temperatures and densities in the shocked foam. We model these experiments with CRASH, an Eulerian radiation hydrodynamics code with block-adaptive mesh refinement, multi-group radiation transport and electron heat conduction. Simulations are presented with SiO2 and carbon foams for both the high temperature, radiative shock and the low-temperature, hydrodynamic shock cases. Calculations from CRASH give estimations for shock speed, electron temperature, effective ionization, and other quantities necessary for designing the XRTS diagnostic measurement. This work is funded by the LLNL under subcontract B614207, and was performed under the auspices of the U.S. DOE by LLNL under Contract No. DE-AC52-07NA27344.

  2. Image quality of the cat eye measured during retinal ganglion cell experiments.

    Science.gov (United States)

    Bonds, A B; Enroth-Cugell, C; Pinto, L H

    1972-01-01

    1. The modulation transfer function (MTF) of the dioptrics of fifteen cat eyes was determined. The aerial image, formed by the eye of a standard object (a 0.5-1.0 degrees annulus), was photographed. The transmission of the film negative was measured with a scanning microdensitometer to yield the light distribution within the aerial image. Correcting for the double passage, this experimentally determined light distribution and the known object light distribution were used to obtain the MTF, applying Fourier methods. Each MTF was used to calculate the light distribution within the retinal image of stimuli of various geometry used in experiments on retinal ganglion cells in the same eye.2. When the eye was equipped with an artificial pupil of the same size as that used in the neurophysiological experiments (4.0-4.8 mm diam.) the MTF had fallen to 0.5 at 2.43 c/deg. When the pupil was removed the MTF had fallen to 0.5 at a much lower spatial frequency (1.0 c/deg). This shows that even when one uses an artificial pupil too large to provide optimal image quality there is a vast improvement over using no pupil.3. These image quality measurements were prompted by the need to know the actual stimulus image in experiments on the functional organization of the receptive field, a need exemplified in this paper by a few specific physiological results. The full neurophysiological results appear in the next two papers.

  3. The QMAP and MAT/TOCO Experiments for Measuring Anisotropy in the Cosmic Microwave Background

    Science.gov (United States)

    Miller, A.; Beach, J.; Bradley, S.; Caldwell, R.; Chapman, H.; Devlin, M. J.; Dorwart, W. B.; Herbig, T.; Jones, D.; Monnelly, G.; Netterfield, C. B.; Nolta, M.; Page, L. A.; Puchalla, J.; Robertson, T.; Torbet, E.; Tran, H. T.; Vinje, W. E.

    2002-06-01

    We describe two related experiments that measured the anisotropy in the cosmic microwave background (CMB). QMAP was a balloon-borne telescope that flew twice in 1996, collecting data on degree angular scales with an array of six high electron mobility transistor-based amplifiers (HEMTs). QMAP used an interlocking scan strategy to directly produce high signal-to-noise ratio CMB maps over a limited region of sky. The QMAP gondola was then refitted for ground-based work as the MAT/TOCO experiment. Observations were made from 5200 m on Cerro Toco in Northern Chile in 1997 and 1998 using time domain beam synthesis. MAT/TOCO measured the rise and fall of the CMB angular spectrum, thereby localizing the position of the first peak to lpeak=216+/-14. In addition to describing the instruments, we discuss the data selection methods, check for systematic errors, and compare the MAT/TOCO results to those from recent experiments. The previously reported data are updated to account for a small calibration shift and corrected to account for a small contribution from known sources of foreground emission. The resulting amplitude of the first peak for 160

  4. Effect of 3D Polarization profiles on polarization measurements and colliding beam experiments

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, W.; Bazilevsky, A.

    2011-08-18

    The development of polarization profiles are the primary reason for the loss of average polarization. Polarization profiles have been parametrized with a Gaussian distribution. We derive the effect of 3-dimensional polarization profiles on the measured polarization in polarimeters, as well as the observed polarization and the figure of merit in single and double spin experiments. Examples from RHIC are provided. The Relativistic Heavy Ion Collider (RHIC) is the only collider of spin polarized protons. During beam acceleration and storage profiles of the polarization P develop, which affect the polarization measured in a polarimeter, and the polarization and figure of merit (FOM) in colliding beam experiments. We calculate these for profiles in all dimensions, and give examples for RHIC. Like in RHIC we call the two colliding beams Blue and Yellow. We use the overbar to designate intensity-weighted averages in polarimeters (e.g. {bar P}), and angle brackets to designate luminosity-weighted averages in colliding beam experiments (e.g.

    ).

  5. Effect of 3D Polarization profiles on polarization measurements and colliding beam experiments

    International Nuclear Information System (INIS)

    Fischer, W.; Bazilevsky, A.

    2011-01-01

    The development of polarization profiles are the primary reason for the loss of average polarization. Polarization profiles have been parametrized with a Gaussian distribution. We derive the effect of 3-dimensional polarization profiles on the measured polarization in polarimeters, as well as the observed polarization and the figure of merit in single and double spin experiments. Examples from RHIC are provided. The Relativistic Heavy Ion Collider (RHIC) is the only collider of spin polarized protons. During beam acceleration and storage profiles of the polarization P develop, which affect the polarization measured in a polarimeter, and the polarization and figure of merit (FOM) in colliding beam experiments. We calculate these for profiles in all dimensions, and give examples for RHIC. Like in RHIC we call the two colliding beams Blue and Yellow. We use the overbar to designate intensity-weighted averages in polarimeters (e.g. (bar P)), and angle brackets to designate luminosity-weighted averages in colliding beam experiments (e.g. ).

  6. AEgIS experiment: Towards antihydrogen beam production for antimatter gravity measurements

    CERN Document Server

    Mariazzi, Sebastiano; Amsler, Claude; Ariga, Akitaka; Ariga, Tomoko; Belov, Alexandre S; Bonomi, Germano; Bräunig, Philippe; Brusa, Roberto S; Bremer, Johan; Cabaret, Louis; Canali, Carlo; Caravita, Ruggero; Castelli, Fabrizio; Cerchiari, Giovanni; Cialdi, Simone; Comparat, Daniel; Consolati, Giovanni; Dassa, Luca; Derking, Jan Hendrik; Di Domizio, Sergio; Di Noto, Lea; Doser, Michael; Dudarev, Alexey; Ereditato, Antonio; Ferragut, Rafael; Fontana, Andrea; Genova, Pablo; Giammarchi, Marco; Gligorova, Angela; Gninenko, Sergei N; Hogan, Stephen D; Haider, Stefan; Jordan, Elena; Jørgensen, Lars V; Kaltenbacher, Thomas; Kawada, Jiro; Kellerbauer, Alban; Kimura, Mitsuhiro; Knecht, Andreas; Krasnický, Daniel; Lagomarsino, Vittorio; Lehner, Sebastian; Malbrunot, Chloe; Matveev, Viktor A; Merkt, Frederic; Moia, Fabio; Nebbia, Giancarlo; Nédélec, Patrick; Oberthaler, Markus K; Pacifico, Nicola; Petráček, Vojtech; Pistillo, Ciro; Prelz, Francesco; Prevedelli, Marco; Regenfus, Christian; Riccardi, Cristina; Røhne, Ole; Rotondi, Alberto; Sandaker, Heidi; Scampoli, Paola; Storey, James; Subieta Vasquez, Martin A.; Spaček, Michal; Czech Technical U. in Prague - FNSPE - B\\oehova 7 - 11519 - Praha 1 - Czech Aff25 Testera, Gemma; Vaccarone, Renzo; Villa, Fabio; Widmann, Eberhard; Zavatarelli, Sandra; Zmeskal, Johann

    2014-01-01

    AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) is an experiment that aims to perform the first direct measurement of the gravitational acceleration g of antihydrogen in the Earth’s field. A cold antihydrogen beam will be produced by charge exchange reaction between cold antiprotons and positronium excited in Rydberg states. Rydberg positronium (with quantum number n between 20 and 30) will be produced by a two steps laser excitation. The antihydrogen beam, after being accelerated by Stark effect, will fly through the gratings of a moir ́ e deflectometer. The deflection of the horizontal beam due to its free fall will be measured by a position sensitive detector. It is estimated that the detection of about 10 3 antihydrogen atoms is required to determine the gravitational acceleration with a precision of 1%. In this report an overview of the AEgIS experiment is presented and its current status is described. Details on the production of slow positronium and its excitation with lasers ar...

  7. Measurements of $B \\to \\mu^{+} \\mu^{-}$ decays using the LHCb experiment

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00400160

    This dissertation documents a study of very rare $B$-meson decays at the LHCb experiment, using data taken during the first experiment run of the Large Hadron Collider (LHC) and during the second experiment run until September 2016. The LHCb experiment was designed to test the Standard Model of particle physics and to search for New Physics effects that go beyond the scope of the Standard Model through the decay of $b$ hadrons produced in high energy proton-proton collisions at the LHC. The measurements described in this dissertation are made using data samples of proton-proton collisions with integrated luminosities of 1.0, 2.0 and 1.4 fb$^{-1}$, collected at centre-of-mass energies of 7, 8 and 13 TeV, respectively. The branching fractions of the very rare $B^{0} \\to \\mu^{+} \\mu^{-}$ and $B_{s}^{0} \\to \\mu^{+} \\mu^{-}$ decays and the effective lifetime of $B_{s}^{0} \\to \\mu^{+} \\mu^{-}$ decays are precisely predicted by the Standard Model and are sensitive to effects from New Physics. New Physics processes...

  8. Confirmatory Tests for the Diagnosis of Primary Aldosteronism: A Prospective Diagnostic Accuracy Study.

    Science.gov (United States)

    Song, Ying; Yang, Shumin; He, Wenwen; Hu, Jinbo; Cheng, Qingfeng; Wang, Yue; Luo, Ting; Ma, Linqiang; Zhen, Qianna; Zhang, Suhua; Mei, Mei; Wang, Zhihong; Qing, Hua; Bruemmer, Dennis; Peng, Bin; Li, Qifu

    2018-01-01

    The diagnosis of primary aldosteronism typically requires at least one confirmatory test. The fludrocortisone suppression test is generally accepted as a reliable confirmatory test, but it is cumbersome. Evidence from accuracy studies of the saline infusion test (SIT) and the captopril challenge test (CCT) has provided conflicting results. This prospective study aimed to evaluate the diagnostic accuracy of the SIT and CCT using fludrocortisone suppression test as the reference standard. One hundred thirty-five patients diagnosed with primary aldosteronism and 101 patients diagnosed with essential hypertension who completed the 3 confirmatory tests were included for the diagnostic accuracy analysis. The areas under the receiver-operator characteristics curves of the CCT and SIT were 0.96 (95% confidence interval [CI], 0.92-0.98) and 0.96 (95% CI, 0.92-0.98), respectively, using post-test plasma aldosterone concentration (PAC) for diagnosis. However, the areas under the receiver-operator characteristics curves of the CCT decreased to 0.71 (95% CI, 0.65-0.77) when the PAC suppression percentage was used to diagnose primary aldosteronism. The optimal cutoff of PAC post-CCT was set at 11 ng/dL, resulting in a sensitivity of 0.90 (95% CI, 0.84-0.95) and a specificity of 0.90 (95% CI, 0.83-0.95), which were not significantly different from those of SIT (with PAC post-SIT set at 8 ng/dL, sensitivity: 0.85 [95% CI, 0.78-0.91], P =0.192; specificity: 0.92 [95% CI, 0.85-0.97], P =0.551). In conclusion, both CCT and SIT are accurate alternatives to the more complex fludrocortisone suppression test. Because CCT is safe and much easier to perform, it may serve as a more feasible alternative. When interpreting the results of CCT, PAC post-CCT is highly recommended. © 2017 American Heart Association, Inc.

  9. Intercomparison study and optical asphericity measurements of small ice particles in the CERN CLOUD experiment

    Directory of Open Access Journals (Sweden)

    L. Nichman

    2017-09-01

    Full Text Available Optical probes are frequently used for the detection of microphysical cloud particle properties such as liquid and ice phase, size and morphology. These properties can eventually influence the angular light scattering properties of cirrus clouds as well as the growth and accretion mechanisms of single cloud particles. In this study we compare four commonly used optical probes to examine their response to small cloud particles of different phase and asphericity. Cloud simulation experiments were conducted at the Cosmics Leaving OUtdoor Droplets (CLOUD chamber at European Organisation for Nuclear Research (CERN. The chamber was operated in a series of multi-step adiabatic expansions to produce growth and sublimation of ice particles at super- and subsaturated ice conditions and for initial temperatures of −30, −40 and −50 °C. The experiments were performed for ice cloud formation via homogeneous ice nucleation. We report the optical observations of small ice particles in deep convection and in situ cirrus simulations. Ice crystal asphericity deduced from measurements of spatially resolved single particle light scattering patterns by the Particle Phase Discriminator mark 2 (PPD-2K, Karlsruhe edition were compared with Cloud and Aerosol Spectrometer with Polarisation (CASPOL measurements and image roundness captured by the 3View Cloud Particle Imager (3V-CPI. Averaged path light scattering properties of the simulated ice clouds were measured using the Scattering Intensity Measurements for the Optical detectioN of icE (SIMONE and single particle scattering properties were measured by the CASPOL. We show the ambiguity of several optical measurements in ice fraction determination of homogeneously frozen ice in the case where sublimating quasi-spherical ice particles are present. Moreover, most of the instruments have difficulties of producing reliable ice fraction if small aspherical ice particles are present, and all of the instruments cannot

  10. Intercomparison study and optical asphericity measurements of small ice particles in the CERN CLOUD experiment

    Science.gov (United States)

    Nichman, Leonid; Järvinen, Emma; Dorsey, James; Connolly, Paul; Duplissy, Jonathan; Fuchs, Claudia; Ignatius, Karoliina; Sengupta, Kamalika; Stratmann, Frank; Möhler, Ottmar; Schnaiter, Martin; Gallagher, Martin

    2017-09-01

    Optical probes are frequently used for the detection of microphysical cloud particle properties such as liquid and ice phase, size and morphology. These properties can eventually influence the angular light scattering properties of cirrus clouds as well as the growth and accretion mechanisms of single cloud particles. In this study we compare four commonly used optical probes to examine their response to small cloud particles of different phase and asphericity. Cloud simulation experiments were conducted at the Cosmics Leaving OUtdoor Droplets (CLOUD) chamber at European Organisation for Nuclear Research (CERN). The chamber was operated in a series of multi-step adiabatic expansions to produce growth and sublimation of ice particles at super- and subsaturated ice conditions and for initial temperatures of -30, -40 and -50 °C. The experiments were performed for ice cloud formation via homogeneous ice nucleation. We report the optical observations of small ice particles in deep convection and in situ cirrus simulations. Ice crystal asphericity deduced from measurements of spatially resolved single particle light scattering patterns by the Particle Phase Discriminator mark 2 (PPD-2K, Karlsruhe edition) were compared with Cloud and Aerosol Spectrometer with Polarisation (CASPOL) measurements and image roundness captured by the 3View Cloud Particle Imager (3V-CPI). Averaged path light scattering properties of the simulated ice clouds were measured using the Scattering Intensity Measurements for the Optical detectioN of icE (SIMONE) and single particle scattering properties were measured by the CASPOL. We show the ambiguity of several optical measurements in ice fraction determination of homogeneously frozen ice in the case where sublimating quasi-spherical ice particles are present. Moreover, most of the instruments have difficulties of producing reliable ice fraction if small aspherical ice particles are present, and all of the instruments cannot separate perfectly

  11. The Autism Family Experience Questionnaire (AFEQ): An Ecologically-Valid, Parent-Nominated Measure of Family Experience, Quality of Life and Prioritised Outcomes for Early Intervention

    Science.gov (United States)

    Leadbitter, Kathy; Aldred, Catherine; McConachie, Helen; Le Couteur, Ann; Kapadia, Dharmi; Charman, Tony; Macdonald, Wendy; Salomone, Erica; Emsley, Richard; Green, Jonathan; Barrett, Barbara; Barron, Sam; Beggs, Karen; Blazey, Laura; Bourne, Katy; Byford, Sarah; Cole-Fletcher, Rachel; Collino, Julia; Colmer, Ruth; Cutress, Anna; Gammer, Isobel; Harrop, Clare; Houghton, Tori; Howlin, Pat; Hudry, Kristelle; Leach, Sue; Maxwell, Jessica; Parr, Jeremy; Pickles, Andrew; Randles, Sarah; Slonims, Vicky; Taylor, Carol; Temple, Kathryn; Tobin, Hannah; Vamvakas, George; White, Lydia

    2018-01-01

    There is a lack of measures that reflect the intervention priorities of parents of children with autism spectrum disorder (ASD) and that assess the impact of interventions on family experience and quality of life. The Autism Family Experience Questionnaire (AFEQ) was developed through focus groups and online consultation with parents, and…

  12. Fluence measurement at the neutron time of flight experiment at CERN

    CERN Document Server

    Weiss, Christina; Jericha, Erwin

    At the neutron time of flight facility n_TOF at CERN a new spallation target was installed in 2008. In 2008 and 2009 the commissioning of the new target took place. During the summer 2009 a fission chamber of the Physikalisch Technische Bundesanstalt (PTB) Braunschweig was used for the neutron fluence measurement. The evaluation of the data recorded with this detector is the primary topic of this thesis. Additionally a neutron transmission experiment with air has been performed at the TRIGA Mark II reactor of the Atomic Institute of the Austrian Universities (ATI). The experiment was implemented to clarify a question about the scattering cross section of molecular gas which could not be answered clearly via the literature. This problem came up during the evaluations for n_TOF.

  13. ASPI experiment: measurements of fields and waves on board the INTERBALL-1 spacecraft

    Directory of Open Access Journals (Sweden)

    S. Klimov

    1997-05-01

    Full Text Available The plasma-wave experiment ASPI (analysis of spectra of plasma waves and instabilities on board the INTERBALL spacecraft is a combined wave diagnostics experiment. It performs measurements of the DC and AC magnetic field vector by flux-gate and search-coil sensors, the DC and AC electric field vector by Langmuir double probes and the plasma current by Langmuir split probe. Preliminary data analysis shows the low noise levels of the sensors and the compatibility of new data with the results of previous missions. During several months of in-orbit operation a rich collection of data was acquired, examples of which at the magnetopause and plasma sheet are presented in second part of the paper.

  14. Consequences of recent loophole-free experiments on a relaxation of measurement independence

    Science.gov (United States)

    Hnilo, Alejandro A.

    2017-02-01

    Recent experiments using innovative optical detectors and techniques have strongly increased the capacity of testing the violation of the Bell's inequalities in Nature. Most of them have used the Eberhard's inequality (EI) to close the "detection" loophole. Closing the "locality" loophole has been attempted by spacelike separated detections and fast changes of the bases of observation, driven by random number generators of new design. Also, pulsed pumping and time-resolved data recording to close the "time-coincidence" loophole, and sophisticated statistical methods to close the "memory" loophole, have been used. In this paper, the meaning of the EI is reviewed. A simple hidden variables theory based on a relaxation of the condition of "measurement independence," which was devised long ago for the Clauser-Horne-Shimony and Holt inequality, is adapted to the EI case. It is used here to evaluate the significance of the results of the recent experiments, which are briefly described. A table summarizes the main results.

  15. An experiment to measure the electron neutrino mass using a cryogenic tritium source

    International Nuclear Information System (INIS)

    Fackler, O.; Jeziorski, B.; Kolos, W.; Monkhorst, H.; Mugge, M.; Sticker, H.; Szalewicz, K.; White, R.M.; Woerner, R.

    1985-01-01

    An experiment has been performed to determine the electron neutrino mass with the precision of a few eV by measuring the tritium beta decay energy distribution near the endpoint. Key features of the experiment are a 2 eV resolution electrostatic spectrometer and a high-activity frozen tritium source. It is important that the source have electronic wavefunctions which can be accurately calculated. These calculations have been made for tritium and the HeT + daughter ion and allow determination of branching fractions to 0.1% and energy of the excited states to 0.1 eV. The excited final molecular state calculations and the experimental apparatus are discussed. 4 refs., 5 figs

  16. Interbunch extinction measurement at the BNL AGS for the KOPIO experiment

    Energy Technology Data Exchange (ETDEWEB)

    Ahrens, L. [Brookhaven National Laboratory (United States); Artamonov, A. [Institute for High Energy Physics, Protvino (Russian Federation); Atoian, G. [Yale University (United States); Brown, K. [Brookhaven National Laboratory (United States); Cantley, C. [Brookhaven National Laboratory (United States); Cartiglia, N. [Stony Brook University (United States); Christidi, I.A. [Stony Brook University (United States); Glenn, J.W. [Brookhaven National Laboratory (United States); Hatzikoutelis, A. [Virginia Polytechnic Institute and State Universtiy (United States)]. E-mail: athans@phys.vt.edu; Jaffe, D.E. [Brookhaven National Laboratory (United States); Koscielniak, S. [TRIUMF (Canada); Lazarus, D.M. [Brookhaven National Laboratory (United States); Mabanta, J. [Brookhaven National Laboratory (United States); Marx, M. [Stony Brook University (United States); Pile, P. [Brookhaven National Laboratory (United States); Redlinger, G. [Brookhaven National Laboratory (United States); Scarlett, C. [Brookhaven National Laboratory (United States); Sivertz, M. [Brookhaven National Laboratory (United States)

    2006-05-10

    The KOPIO experiment at the BNL AGS required an extracted proton beam in which a debunched, coasting beam is forced between empty longitudinal RF buckets to form microbunches. The goal of the measurement described here was to obtain a low background determination of the fraction of protons coming from the AGS slowly extracted beam at times between microbunches (interbunch extinction). The effect on interbunch extinction of variations in the RF cavity voltage, the momentum dispersion of the beam and the main guide field voltage-ripple was studied. It was found that there exists a broad range of operating parameters that could allow the AGS to produce microbunches with the interbunch extinction better than the KOPIO experiment requirement. Results obtained in this study gave interbunch extinctions better than 10{sup -5} (1%) of KOPIO's upper limit.

  17. Rigorous approach to the comparison between experiment and theory in Casimir force measurements

    International Nuclear Information System (INIS)

    Klimchitskaya, G L; Chen, F; Decca, R S; Fischbach, E; Krause, D E; Lopez, D; Mohideen, U; Mostepanenko, V M

    2006-01-01

    In most experiments on the Casimir force the comparison between measurement data and theory was done using the concept of the root-mean-square deviation, a procedure that has been criticized in the literature. Here we propose a special statistical analysis which should be performed separately for the experimental data and for the results of the theoretical computations. In so doing, the random, systematic and total experimental errors are found as functions of separation, taking into account the distribution laws for each error at 95% confidence. Independently, all theoretical errors are combined to obtain the total theoretical error at the same confidence. Finally, the confidence interval for the differences between theoretical and experimental values is obtained as a function of separation. This rigorous approach is applied to two recent experiments on the Casimir effect

  18. Impact of legal measures prevent transplant tourism: the interrelated experience of The Philippines and Israel.

    Science.gov (United States)

    Padilla, Benita; Danovitch, Gabriel M; Lavee, Jacob

    2013-11-01

    We describe the parallel changes that have taken place in recent years in two countries, Israel and The Philippines, the former once an "exporter" of transplant tourists and the latter once an "importer" of transplant tourists. These changes were in response to progressive legislation in both countries under the influence of the Declaration of Istanbul. The annual number of Israeli patients who underwent kidney transplantation abroad decreased from a peak of 155 in 2006 to an all-time low of 35 in 2011 while in the Philippines the annual number of foreign transplant recipients fell from 531 in 2007 to two in 2011. The experience of these two countries provides a "natural experiment" on the potential impact of legal measures to prevent transplant tourism.

  19. Radiopurity control in the NEXT-100 double beta decay experiment: procedures and initial measurements

    International Nuclear Information System (INIS)

    Álvarez, V; Cárcel, S; Cervera, A; Díaz, J; Ferrario, P; Bandac, I; Bettini, A; Castel, J; Cebrián, S; Dafni, T; Borges, F I G M; Conde, C A N; Dias, T H V T; Fernandes, L M P; Freitas, E D C; Egorov, M; Gehman, V M; Esteve, R; Evtoukhovitch, P; Ferreira, A L

    2013-01-01

    The ''Neutrino Experiment with a Xenon Time-Projection Chamber'' (NEXT) is intended to investigate the neutrinoless double beta decay of 136 Xe, which requires a severe suppression of potential backgrounds. An extensive screening and material selection process is underway for NEXT since the control of the radiopurity levels of the materials to be used in the experimental set-up is a must for rare event searches. First measurements based on Glow Discharge Mass Spectrometry and gamma-ray spectroscopy using ultra-low background germanium detectors at the Laboratorio Subterr and apos;aneo de Canfranc (Spain) are described here. Activity results for natural radioactive chains and other common radionuclides are summarized, being the values obtained for some materials like copper and stainless steel very competitive. The implications of these results for the NEXT experiment are also discussed.

  20. Measurement of direct CP-violation with the experiments NA31 and NA48 at CERN

    International Nuclear Information System (INIS)

    Renk, B.

    1992-01-01

    The NA31 experiment has measured the CP violation parameter var-epsilon '/var-epsilon. The result of data collected in 1988 is Re(var-epsilon '/var-epsilon)=(1.7±1.0)x10 -3 . A preliminary result of data collected in 1989 is Re(var-epsilon '/var-epsilon)=(2.1±0.9)x10 -3 . Combining these two results with the original result from the 1986 data set we obtain Re(var-epsilon '/var-epsilon)=(2.3±0.7)x10 -3 , which is a more than three standard deviation evidence for direct CP violation. A new experiment NA48 is under construction which aims for a significant reduction of the statistical and the systematical errors in order to reach a combined error not exceeding 2x10 -4

  1. Interviewing to develop Patient-Reported Outcome (PRO) measures for clinical research: eliciting patients’ experience

    Science.gov (United States)

    2014-01-01

    Patient-reported outcome (PRO) measures must provide evidence that their development followed a rigorous process for ensuring their content validity. To this end, the collection of data is performed through qualitative interviews that allow for the elicitation of in-depth spontaneous reports of the patients’ experiences with their condition and/or its treatment. This paper provides a review of qualitative research applied to PRO measure development. A clear definition of what is a qualitative research interview is given as well as information about the form and content of qualitative interviews required for developing PRO measures. Particular attention is paid to the description of interviewing approaches (e.g., semi-structured and in-depth interviews, individual vs. focus group interviews). Information about how to get prepared for a qualitative interview is provided with the description of how to develop discussion guides for exploratory or cognitive interviews. Interviewing patients to obtain knowledge regarding their illness experience requires interpersonal and communication skills to facilitate patients’ expression. Those skills are described in details, as well as the skills needed to facilitate focus groups and to interview children, adolescents and the elderly. Special attention is also given to quality assurance and interview training. The paper ends on ethical considerations since interviewing for the development of PROs is performed in a context of illness and vulnerability. Therefore, it is all the more important that, in addition to soliciting informed consent, respectful interactions be ensured throughout the interview process. PMID:24499454

  2. Associations Between Physician Empathy, Physician Characteristics, and Standardized Measures of Patient Experience.

    Science.gov (United States)

    Chaitoff, Alexander; Sun, Bob; Windover, Amy; Bokar, Daniel; Featherall, Joseph; Rothberg, Michael B; Misra-Hebert, Anita D

    2017-10-01

    To identify correlates of physician empathy and determine whether physician empathy is related to standardized measures of patient experience. Demographic, professional, and empathy data were collected during 2013-2015 from Cleveland Clinic Health System physicians prior to participation in mandatory communication skills training. Empathy was assessed using the Jefferson Scale of Empathy. Data were also collected for seven measures (six provider communication items and overall provider rating) from the visit-specific and 12-month Consumer Assessment of Healthcare Providers and Systems Clinician and Group (CG-CAHPS) surveys. Associations between empathy and provider characteristics were assessed by linear regression, ANOVA, or a nonparametric equivalent. Significant predictors were included in a multivariable linear regression model. Correlations between empathy and CG-CAHPS scores were assessed using Spearman rank correlation coefficients. In bivariable analysis (n = 847 physicians), female sex (P empathy scores. In multivariable analysis, female sex (P empathy scores. Of the seven CG-CAHPS measures, scores on five for the 583 physicians with visit-specific data and on three for the 277 physicians with 12-month data were positively correlated with empathy. Specialty and sex were independently associated with physician empathy. Empathy was correlated with higher scores on multiple CG-CAHPS items, suggesting improving physician empathy might play a role in improving patient experience.

  3. Measurement of nitrogen in the body using a commercial PGNAA system--phantom experiments.

    Science.gov (United States)

    Chichester, D L; Empey, E

    2004-01-01

    An industrial prompt-gamma neutron activation analysis (PGNAA) system, originally designed for the real-time elemental analyses of bulk coal on a conveyor belt, has been studied to examine the feasibility of using such a system for body composition analysis. Experiments were conducted to measure nitrogen in a simple, tissue equivalent phantom comprised of 2.7 wt% of nitrogen. The neutron source for these experiments was 365 MBq (18.38 microg) of 252Cf located within an engineered low Z moderator and it yielded a dose rate in the measurement position of 3.91 mSv/h; data were collected using a 2780 cm(3) NaI(Tl) cylindrical detector with a digital signal processor and a 512 channel MCA. Source, moderator and detector geometries were unaltered from the system's standard configuration, where they have been optimized for considerations such as neutron thermalization, measurement sensitivity and uniformity, background radiation and external dose minimization. Based on net counts in the 10.8 MeV PGNAA nitrogen photopeak and its escape peaks the dose dependent nitrogen count rate was 11,600 counts/mSv with an uncertainty of 3.0% after 0.32 mSv (4.9 min), 2.0% after 0.74 mSv (11.4 min) and 1.0% after 3.02 mSv (46.4 min).

  4. Measurement of the leptonic mixing parameter θ13 at the reactor antineutrino experiment Double Chooz

    International Nuclear Information System (INIS)

    Durand, V.

    2014-01-01

    The Double Chooz experiment aims at measuring the neutrino mixing parameter θ 13 by studying the oscillations of ν-bar e produced by the Chooz nuclear reactors located in France. The experimental concept consists in comparing the signal of 2 identical 10.3 m 3 detectors, allowing the cancellation of most of the experimental systematic uncertainties. The near detector, whose goal is the flux normalization and a measurement without oscillation, is expected to be delivered in 2013. The farthest detector from the source is taking data since april 2011 and is sensitive to θ 13 , which is expected to affect both the rate and the shape of measured ν-bar e . In 102 days with far detector only, 4121 ν-bar e candidates have been observed, while the expectation in case of no-oscillation is 4344 ± 165 events. This deficit is interpreted as evidence for ν-bar e disappearance. From a rate and shape analysis, it is found that sin 2 (θ 13 ) = [0.086±0.041(stat.)±0.030(syst)] with Δm 31 2 =2.4*10 -3 eV 2 , while the no-oscillation hypothesis is even excluded at 94.6%. We present in this document the concept and detection method of the Double Chooz experiment, along with its analysis strategy and first results on θ 13 . (author)

  5. Measurement of the strange quark content of nucleon: G0 experiment

    International Nuclear Information System (INIS)

    Batigne, G.

    2003-12-01

    The G 0 project is a parity violation experiment dedicated to the measurement of the proton weak and axial form factors by means of electron-proton scattering. Combining these weak form factors with the electromagnetic ones makes possible the extraction of the contribution of strange quarks to the charge and magnetization distribution in the nucleon. This thesis presents the strategy used for the G 0 experiment, the different subsystems and the first results from its engineering run. The counting rate asymmetries, at the order of 10-5, are measured over a large range in transferred momentum (Q 2 = 0.1 to 1 (GeV/c) 2 ) with expected precision at the level of 10 -7 . A deadtime correction program has been developed which allows to correct 90% of the counting losses and to reduce associated false asymmetries at the level of 10-8. A method has been defined to extract the measured values of Q 2 with a precision of 1%. The first preliminary results of G 0 on parity violation asymmetries are also shown. (author)

  6. Different meaning of the p-value in exploratory and confirmatory hypothesis testing

    DEFF Research Database (Denmark)

    Gerke, Oke; Høilund-Carlsen, Poul Flemming; Vach, Werner

    2011-01-01

    The outcome of clinical studies is often reduced to the statistical significance of results by indicating a p-value below the 5% significance level. Hypothesis testing and, through that, the p-value is commonly used, but their meaning is frequently misinterpreted in clinical research. The concept...... of hypothesis testing is explained and some pitfalls including those of multiple testing are given. The conceptual difference between exploratory and confirmatory hypothesis testing is discussed, and a better use of p-values, which includes presenting p-values with two or three decimals, is suggested....

  7. A CONFIRMATORY STUDY OF SUPPLY CHAIN PERFORMANCE AND COMPETITIVENESS OF INDIAN MANUFACTURING ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Amit Kumar Marwah

    2014-03-01

    Full Text Available This paper presents finding of a study on Indian manufacturing organizations. A conceptual model is proposed based on a rigorous literature review. The model so developed undergoes through a confirmatory factor analysis (CFA using Structural Equation Modeling (SEM approach. The paper highlights various factors responsible for supply chain performance (SCP, subsequently leading to competitiveness. The survey involves 361 manufacturing organizations across India and the data is gathered using 5-point Likert scale. The study a ttempts to integrate various factors contributing to SCP in a single study. It is proposed to further test the model using exploratory factor analysis (EFA.

  8. Comparison of Multispot EIA with Western blot for confirmatory serodiagnosis of HIV.

    Science.gov (United States)

    Torian, Lucia V; Forgione, Lisa A; Punsalang, Amado E; Pirillo, Robert E; Oleszko, William R

    2011-12-01

    Recent improvements in the sensitivity of immunoassays (IA) used for HIV screening, coupled with increasing recognition of the importance of rapid point-of-care testing, have led to proposals to adjust the algorithm for serodiagnosis of HIV so that screening and confirmation can be performed using a dual or triple IA sequence that does not require Western blotting for confirmation. One IA that has been proposed as a second or confirmatory test is the Bio-Rad Multispot(®) Rapid HIV-1/HIV-2 Test. This test would have the added advantage of differentiating between HIV-1 and HIV-2 antibodies. To compare the sensitivity and type-specificity of an algorithm combining a 3rd generation enzyme immunoassay (EIA) followed by a confirmatory Multispot with the conventional algorithm that combines a 3rd generation EIA (Bio-Rad GS HIV-1/HIV-2 Plus O EIA) followed by confirmatory Western blot (Bio-Rad GS HIV-1 WB). 8760 serum specimens submitted for HIV testing to the New York City Public Health Laboratory between May 22, 2007, and April 30, 2010, tested repeatedly positive on 3rd generation HIV-1-2+O EIA screening and received parallel confirmatory testing by WB and Multispot (MS). 8678/8760 (99.1%) specimens tested WB-positive; 82 (0.9%) tested WB-negative or indeterminate (IND). 8690/8760 specimens (99.2%) tested MS-positive, of which 14 (17.1%) had been classified as negative or IND by WB. Among the HIV-1 WB-positive specimens, MS classified 26 (0.29%) as HIV-2. Among the HIV-1 WB negative and IND, MS detected 12 HIV-2. MS detected an additional 14 HIV-1 infections among WB negative or IND specimens, differentiated 26 HIV-1 WB positives as HIV-2, and detected 12 additional HIV-2 infections among WB negative/IND. A dual 3rd generation EIA algorithm incorporating MS had equivalent HIV-1 sensitivity to the 3rd generation EIA-WB algorithm and had the added advantage of detecting 12 HIV-2 specimens that were not HIV-1 WB cross-reactors. In this series an algorithm using EIA

  9. The value of confirmatory testing in early infant HIV diagnosis programmes in South Africa: A cost-effectiveness analysis.

    Science.gov (United States)

    Dunning, Lorna; Francke, Jordan A; Mallampati, Divya; MacLean, Rachel L; Penazzato, Martina; Hou, Taige; Myer, Landon; Abrams, Elaine J; Walensky, Rochelle P; Leroy, Valériane; Freedberg, Kenneth A; Ciaranello, Andrea

    2017-11-01

    The specificity of nucleic acid amplification tests (NAATs) used for early infant diagnosis (EID) of HIV infection is model, we simulated EID testing at age 6 weeks for HIV-exposed infants without and with confirmatory testing. We assumed a NAAT cost of US$25, NAAT specificity of 99.6%, NAAT sensitivity of 100% for infants infected in pregnancy or at least 4 weeks prior to testing, and a mother-to-child transmission (MTCT) rate at 12 months of 4.9%; we simulated guideline-concordant rates of testing uptake, result return, and antiretroviral therapy (ART) initiation (100%). After diagnosis, infants were linked to and retained in care for 10 years (false-positive) or lifelong (true-positive). All parameters were varied widely in sensitivity analyses. Outcomes included number of infants with false-positive diagnoses linked to ART per 1,000 ART initiations, life expectancy (LE, in years) and per-person lifetime HIV-related healthcare costs. Both without and with confirmatory testing, LE was 26.2 years for HIV-infected infants and 61.4 years for all HIV-exposed infants; clinical outcomes for truly infected infants did not differ by strategy. Without confirmatory testing, 128/1,000 ART initiations were false-positive diagnoses; with confirmatory testing, 1/1,000 ART initiations were false-positive diagnoses. Because confirmatory testing averted costly HIV care and ART in truly HIV-uninfected infants, it was cost-saving: total cost US$1,790/infant tested, compared to US$1,830/infant tested without confirmatory testing. Confirmatory testing remained cost-saving unless NAAT cost exceeded US$400 or the HIV-uninfected status of infants incorrectly identified as infected was ascertained and ART stopped within 3 months of starting. Limitations include uncertainty in the data used in the model, which we examined with sensitivity and uncertainty analyses. We also excluded clinical harms to HIV-uninfected infants incorrectly treated with ART after false-positive diagnosis (e

  10. Radiometric modeling and calibration of the Geostationary Imaging Fourier Transform Spectrometer (GIFTS) ground based measurement experiment

    Science.gov (United States)

    Tian, Jialin; Smith, William L.; Gazarik, Michael J.

    2008-12-01

    The ultimate remote sensing benefits of the high resolution Infrared radiance spectrometers will be realized with their geostationary satellite implementation in the form of imaging spectrometers. This will enable dynamic features of the atmosphere's thermodynamic fields and pollutant and greenhouse gas constituents to be observed for revolutionary improvements in weather forecasts and more accurate air quality and climate predictions. As an important step toward realizing this application objective, the Geostationary Imaging Fourier Transform Spectrometer (GIFTS) Engineering Demonstration Unit (EDU) was successfully developed under the NASA New Millennium Program, 2000-2006. The GIFTS-EDU instrument employs three focal plane arrays (FPAs), which gather measurements across the long-wave IR (LWIR), short/mid-wave IR (SMWIR), and visible spectral bands. The GIFTS calibration is achieved using internal blackbody calibration references at ambient (260 K) and hot (286 K) temperatures. In this paper, we introduce a refined calibration technique that utilizes Principle Component (PC) analysis to compensate for instrument distortions and artifacts, therefore, enhancing the absolute calibration accuracy. This method is applied to data collected during the GIFTS Ground Based Measurement (GBM) experiment, together with simultaneous observations by the accurately calibrated AERI (Atmospheric Emitted Radiance Interferometer), both simultaneously zenith viewing the sky through the same external scene mirror at ten-minute intervals throughout a cloudless day at Logan Utah on September 13, 2006. The accurately calibrated GIFTS radiances are produced using the first four PC scores in the GIFTS-AERI regression model. Temperature and moisture profiles retrieved from the PC-calibrated GIFTS radiances are verified against radiosonde measurements collected throughout the GIFTS sky measurement period. Using the GIFTS GBM calibration model, we compute the calibrated radiances from data

  11. Characterization of a CLYC detector and validation of the Monte Carlo Simulation by measurement experiments

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Suk; Ye, Sung Joon [Seoul National University, Seoul (Korea, Republic of); Smith, Martin B.; Koslowsky, Martin R. [Bubble Technology Industries Inc., Chalk River (Canada); Kwak, Sung Woo [Korea Institute of Nuclear Nonproliferation And Control (KINAC), Daejeon (Korea, Republic of); Kim Gee Hyun [Sejong University, Seoul (Korea, Republic of)

    2017-03-15

    Simultaneous detection of neutrons and gamma rays have become much more practicable, by taking advantage of good gamma-ray discrimination properties using pulse shape discrimination (PSD) technique. Recently, we introduced a commercial CLYC system in Korea, and performed an initial characterization and simulation studies for the CLYC detector system to provide references for the future implementation of the dual-mode scintillator system in various studies and applications. We evaluated a CLYC detector with 95% 6Li enrichment using various gamma-ray sources and a 252Cf neutron source, with validation of our Monte Carlo simulation results via measurement experiments. Absolute full-energy peak efficiency values were calculated for gamma-ray sources and neutron source using MCNP6 and compared with measurement experiments of the calibration sources. In addition, behavioral characteristics of neutrons were validated by comparing simulations and experiments on neutron moderation with various polyethylene (PE) moderator thicknesses. Both results showed good agreements in overall characteristics of the gamma and neutron detection efficiencies, with consistent ⁓20% discrepancy. Furthermore, moderation of neutrons emitted from {sup 252}Cf showed similarities between the simulation and the experiment, in terms of their relative ratios depending on the thickness of the PE moderator. A CLYC detector system was characterized for its energy resolution and detection efficiency, and Monte Carlo simulations on the detector system was validated experimentally. Validation of the simulation results in overall trend of the CLYC detector behavior will provide the fundamental basis and validity of follow-up Monte Carlo simulation studies for the development of our dual-particle imager using a rotational modulation collimator.

  12. Measurements of high energy photons in Z-pinch experiments on primary test stand

    International Nuclear Information System (INIS)

    Si, Fenni; Zhang, Chuanfei; Xu, Rongkun; Yuan, Xi; Huang, Zhanchang; Xu, Zeping; Ye, Fan; Yang, Jianlun; Ning, Jiamin; Hu, Qingyuan; Zhu, Xuebin

    2015-01-01

    High energy photons are measured for the first time in wire-array Z-pinch experiments on the Primary Test Stand (PTS) which delivers a current up to 8 MA with a rise time of 70 ns. A special designed detecting system composed of three types of detectors is used to measure the average energy, intensity, and pulse waveform of high energy photons. Results from Pb-TLD (thermoluminescence dosimeter) detector indicate that the average energy is 480 keV (±15%). Pulse shape of high energy photons is measured by the photodiode detector consisted of scintillator coupled with a photodiode, and it is correlated with soft x-ray power by the same timing signal. Intensity is measured by both TLD and the photodiode detector, showing good accordance with each other, and it is 10 10 cm −2 (±20%) at 2 m in the horizontal direction. Measurement results show that high energy photons are mainly produced in pinch regions due to accelerated electrons. PTS itself also produces high energy photons due to power flow electrons, which is one order smaller in amplitude than those from pinch region

  13. Second international comparison on measuring techniques of tritium production rate for fusion neutronics experiments (ICMT-2)

    International Nuclear Information System (INIS)

    Maekawa, Fujio; Maekawa, Hiroshi

    1993-02-01

    An second international comparison on measuring techniques of tritium production rates for fusion neutronics experiments (ICMT-2) has been performed. The purpose is to evaluate the measurement accuracy of tritium production rates in the current measurement techniques. Two 14 MeV neutron source facilities, FNS at JAERI-Japan and LOTUS at EPFL-Switzerland, were used for this purpose. Nine groups out of seven countries participated in this program. A fusion simulated blanket assembly of simple-geometry was served as the test bed at each facility, in which Li-containing samples from the participants were irradiated in an uniform neutron field. The tritium production rates were determined by the participants using their own ways by using the liquid scintillation counting method. Tritiated water sample with unknown but the same concentration was also distributed and its concentration was measured to make a common reference. The standard deviation of measured tritium production rates among participants was about 10 % for both FNS and LOTUS irradiation levels: 4x10 -13 T-atoms/Li-atom and 1.6x10 -12 T-atoms/Li-atom at a sample, respectively. This standard deviation exceeds the expected deviation of 5 % in this program. It is presumed that the deviation of 10 % is caused mainly by the systematic and unknown errors in a process of tritium extraction from the irradiated samples depending on each organization. (author)

  14. Measurements of Plasma Power Losses in the C-2 Field-Reversed Configuration Experiment

    Science.gov (United States)

    Korepanov, Sergey; Smirnov, Artem; Garate, Eusebio; Donin, Alexandr; Kondakov, Alexey; Singatulin, Shavkat

    2013-10-01

    A high-confinement operating regime with plasma lifetimes significantly exceeding past empirical scaling laws was recently obtained by combining plasma gun edge biasing and tangential Neutral Beam Injection in the C-2 field-reversed configuration (FRC) experiment. To analyze the power balance in C-2, two new diagnostic instruments - the pyroelectric (PE) and infrared (IR) bolometers - were developed. The PE bolometer, designed to operate in the incident power density range from 0.1-100 W/cm2, is used to measure the radial power loss, which is dominated by charge-exchange neutrals and radiation. The IR bolometer, which measures power irradiated onto a thin metal foil inserted in the plasma, is designed for the power density range from 0.5-5 kW/cm2. The IR bolometer is used to measure the axial power loss from the plasma near the end divertors. The maximum measurable pulse duration of ~ 10 ms is limited by the heat capacitance of the IR detector. Both detectors have time resolution of about 10-100 μs and were calibrated in absolute units using a high power neutral beam. We present the results of first direct measurements of axial and radial plasma power losses in C-2.

  15. Child and adolescent service experience (ChASE): measuring service quality and therapeutic process.

    Science.gov (United States)

    Day, Crispin; Michelson, Daniel; Hassan, Imren

    2011-11-01

    OBJECTIVES. Dissatisfaction with services has been associated with poorer child mental health outcomes, early treatment termination as well as disagreements over the nature of mental health difficulties, reasons for referral and therapy goals. The development of straightforward, reliable, and accurate methods of eliciting service users' views is essential within child and adolescent mental health care. This paper describes the development of the child and adolescent service experience (ChASE), a tool to measure children and young people's service experience DESIGN. The study comprises a non-experimental, cross-sectional design. METHODS. Participants were 132 mental health service users aged 8-18 years. Participants and their main carer completed the ChASE, Parent Satisfaction Questionnaire (PSQ) (Stallard, 1996) and Strengths and Difficulties (SDQ) Impact Supplement. Clinicians completed the SDQ Impact Supplement and provided clinical activity data. A sub-sample of participants completed the ChASE on a second occasion, 6 weeks after the completion of the first questionnaire. RESULTS. Scrutiny of ChASE data indicated high levels of completion. Principal axis factoring identified three factors within the ChASE: Relationship, Privacy, and Session Activity. The ChASE has good internal consistency and test-retest reliability. Significant correlations were found between the ChASE and carer satisfaction, service use, and youth clinical outcomes. CONCLUSIONS. The ChASE is a short, psychometrically robust tool for routine measurement of children, and young people's experience of mental health services, which users can complete easily. The results underline the importance of alliance factors to children and young people and their association with clinical improvement as well as the potential for the ChASE to be used a measure of children's therapeutic progress and alliance. ©2011 The British Psychological Society.

  16. A Simple Experiment to Determine the Characteristics of an NTC Thermistor for Low-Temperature Measurement Applications

    Science.gov (United States)

    Mawire, A.

    2012-01-01

    A simple low-cost experiment for undergraduate students to determine the characteristics of a negative temperature coefficient of resistance thermistor is presented. The experiment measures the resistance-temperature and voltage-temperature characteristics of the thermistor. Results of the resistance-temperature experiment are used to determine…

  17. Development and validation of the Consumer Quality index instrument to measure the experience and priority of chronic dialysis patients

    NARCIS (Netherlands)

    van der Veer, Sabine N.; Jager, Kitty J.; Visserman, Ella; Beekman, Robert J.; Boeschoten, Els W.; de Keizer, Nicolette F.; Heuveling, Lara; Stronks, Karien; Arah, Onyebuchi A.

    2012-01-01

    Patient experience is an established indicator of quality of care. Validated tools that measure both experiences and priorities are lacking for chronic dialysis care, hampering identification of negative experiences that patients actually rate important. We developed two Consumer Quality (CQ) index

  18. A combination of preliminary results on gauge boson couplings measured by the LEP Experiments

    CERN Document Server

    CERN. Geneva

    2004-01-01

    This note presents a combination of published and preliminary measurements of triple gauge boson couplings (TGCs) and quartic gauge boson couplings (QGCs) from the four LEP experiments. We give an updated combination of the charged TGCs, g1z, kg and lg in single and multi-parameter fits. Updated results from the QGCs from the ZZgg vertex, ac/Lambda^2 and a0/Lambda^2, are given as well. The combinations of neutral TGCs hiv anf fiv are also presented, including an updated fiv combination.

  19. Strategy of HPGe screening measurements in the SuperNEMO experiment

    Energy Technology Data Exchange (ETDEWEB)

    Perrot, Frédéric [Université de Bordeaux, Centre d' Etudes Nucléaires de Bordeaux Gradignan, UMR 5797, Chemin du Solarium, Le Haut-Vigneau, BP120, F-33175 Gradignan, France and CNRS/IN2P3, Centre d' Etudes Nucléaires de Bordeaux Gradignan, UMR 5797 (France); Collaboration: SuperNEMO Collaboration

    2013-08-08

    SuperNEMO is a double beta decay experiment that will use a tracko-calorimeter technique. The goal is to reach a sensitivity of T{sub 1/2}(0ν)>10{sup 26} y corresponding to an effective Majorana neutrino mass of 0.04-0.11 eV with 100 kg of {sup 82}Se. The general strategy of the HPGe screening measurements is described for the materials of the SuperNEMO demonstrator, regarding their radiopurity and their location. The two platforms, PRISNA and LSM, used for this screening are also briefly described.

  20. Reynolds and Maxwell stress measurements in the reversed field pinch experiment Extrap-T2R

    Science.gov (United States)

    Vianello, N.; Antoni, V.; Spada, E.; Spolaore, M.; Serianni, G.; Cavazzana, R.; Bergsåker, H.; Cecconello, M.; Drake, J. R.

    2005-08-01

    The complete Reynolds stress (RS) has been measured in the edge region of the Extrap-T2R reversed field pinch experiment. The RS exhibits a strong gradient in the region where a high E × B shear takes place. Experimental results show this gradient to be almost entirely due to the electrostatic contribution. This has been interpreted as experimental evidence of flow generation via turbulence mechanism. The scales involved in flow generation are deduced from the frequency decomposition of RS tensor. They are found related to magnetohydrodynamic activity but are different with respect to the scales responsible for turbulent transport.