WorldWideScience

Sample records for confidence manually validated

  1. A high confidence, manually validated human blood plasma protein reference set

    DEFF Research Database (Denmark)

    Schenk, Susann; Schoenhals, Gary J; de Souza, Gustavo

    2008-01-01

    BACKGROUND: The immense diagnostic potential of human plasma has prompted great interest and effort in cataloging its contents, exemplified by the Human Proteome Organization (HUPO) Plasma Proteome Project (PPP) pilot project. Due to challenges in obtaining a reliable blood plasma protein list......-trap-Fourier transform (LTQ-FT) and a linear ion trap-Orbitrap (LTQ-Orbitrap) for mass spectrometry (MS) analysis. Both instruments allow the measurement of peptide masses in the low ppm range. Furthermore, we employed a statistical score that allows database peptide identification searching using the products of two...... consecutive stages of tandem mass spectrometry (MS3). The combination of MS3 with very high mass accuracy in the parent peptide allows peptide identification with orders of magnitude more confidence than that typically achieved. RESULTS: Herein we established a high confidence set of 697 blood plasma proteins...

  2. CTF Validation and Verification Manual

    Energy Technology Data Exchange (ETDEWEB)

    Salko, Robert K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Blyth, Taylor S. [Pennsylvania State Univ., University Park, PA (United States); Dances, Christopher A. [Pennsylvania State Univ., University Park, PA (United States); Magedanz, Jeffrey W. [Pennsylvania State Univ., University Park, PA (United States); Jernigan, Caleb [Holtec International, Marlton, NJ (United States); Kelly, Joeseph [U.S. Nuclear Regulatory Commission (NRC), Rockville, MD (United States); Toptan, Aysenur [North Carolina State Univ., Raleigh, NC (United States); Gergar, Marcus [Pennsylvania State Univ., University Park, PA (United States); Gosdin, Chris [Pennsylvania State Univ., University Park, PA (United States); Avramova, Maria [Pennsylvania State Univ., University Park, PA (United States); Palmtag, Scott [Core Physics, Inc., Cary, NC (United States); Gehin, Jess C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-05-25

    Coolant-Boiling in Rod Arrays- Two Fluids (COBRA-TF) is a Thermal/Hydraulic (T/H) simulation code designed for Light Water Reactor (LWR) analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of nine conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and has been used and modified by several institutions over the last several decades. COBRA-TF is also used at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG), and has been improved, updated, and subsequently became the PSU RDFMG version of COBRA-TF (CTF). One part of the improvement process includes validating the methods in CTF. This document seeks to provide a certain level of certainty and confidence in the predictive capabilities of the code for the scenarios it was designed to model--rod bundle geometries with operating conditions that are representative of prototypical Pressurized Water Reactor (PWR)s and Boiling Water Reactor (BWR)s in both normal and accident conditions. This is done by modeling a variety of experiments that simulate these scenarios and then presenting a qualitative and quantitative analysis of the results that demonstrates the accuracy to which CTF is capable of capturing specific quantities of interest.

  3. The Manual Work Instability Scale: development and validation.

    Science.gov (United States)

    Gilworth, G; Smyth, M G; Smith, J; Tennant, A

    2016-06-01

    Increasing awareness of the burden of absenteeism and reduced performance at work highlights the importance of early identification of individuals experiencing work instability (WI), a mismatch between functional and cognitive abilities and job demands. To develop and validate a screening questionnaire to measure WI in manual workers. Questionnaire items were generated via qualitative interviews with manual workers and a draft survey instrument was completed by workers in a variety of fields. Rasch analysis was used interactively to assess the psychometric aspects of the emerging scale, including unidimensionality and absence of item bias (differential item functioning). A total of 17 qualitative interviews generated 110 potential items for the questionnaire. The item set resolved to a 25-item scale, which satisfied model expectations (item residual mean = -0.13, SD = 1.04; person residual mean = -0.29, SD = 0.75), had good reliability (alpha = 0.86) and strict unidimensionality (t-test 7.5% confidence interval 3.8-11.2). The Manual Work Instability Scale is a short psychometrically robust questionnaire based on the concept of WI, which incorporates both musculoskeletal symptoms and relevant psychosocial factors. It may prove effective in screening and identifying WI in workers in predominantly physical occupations. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  4. Lumbar segmental instability: a criterion-related validity study of manual therapy assessment

    Directory of Open Access Journals (Sweden)

    Chapple Cathy

    2005-11-01

    Full Text Available Abstract Background Musculoskeletal physiotherapists routinely assess lumbar segmental motion during the clinical examination of a patient with low back pain. The validity of manual assessment of segmental motion has not, however, been adequately investigated. Methods In this prospective, multi-centre, pragmatic, diagnostic validity study, 138 consecutive patients with recurrent or chronic low back pain (R/CLBP were recruited. Physiotherapists with post-graduate training in manual therapy performed passive accessory intervertebral motion tests (PAIVMs and passive physiological intervertebral motion tests (PPIVMs. Consenting patients were referred for flexion-extension radiographs. Sagittal angular rotation and sagittal translation of each lumbar spinal motion segment was measured from these radiographs, and compared to a reference range derived from a study of 30 asymptomatic volunteers. Motion beyond two standard deviations from the reference mean was considered diagnostic of rotational lumbar segmental instability (LSI and translational LSI. Accuracy and validity of the clinical assessments were expressed using sensitivity, specificity, and likelihood ratio statistics with 95% confidence intervals (CI. Results Only translation LSI was found to be significantly associated with R/CLBP (p Conclusion This study provides the first evidence reporting the concurrent validity of manual tests for the detection of abnormal sagittal planar motion. PAIVMs and PPIVMs are highly specific, but not sensitive, for the detection of translation LSI. Likelihood ratios resulting from positive test results were only moderate. This research indicates that manual clinical examination procedures have moderate validity for detecting segmental motion abnormality.

  5. Wheelchair skills training to improve confidence with using a manual wheelchair among older adults: a pilot study.

    Science.gov (United States)

    Sakakibara, Brodie M; Miller, William C; Souza, Melanie; Nikolova, Viara; Best, Krista L

    2013-06-01

    To examine the effects of wheelchair skills training on confidence in older adults who are inexperienced wheelchair users. Parallel group, single-blind randomized controlled trial. Research laboratory in a rehabilitation hospital. Participants (N=20) who were community-living older adults at least 65 years old (mean age, 70y), 50% women, and who had no experience of using a wheelchair were randomly allocated to an intervention (n=10) or control (n=10) group. The intervention group received two 1-hour training sessions that followed the Wheelchair Skills Training Program (WSTP) protocol. The control group received a single socialization contact. The Wheelchair Use Confidence Scale-Manual (WheelCon-M) was used to evaluate confidence with using a manual wheelchair. The WheelCon-M is a self-report questionnaire that comprises 65 items in 6 conceptual areas. A 1-way between-groups analysis of covariance revealed a significant difference in postintervention WheelCon-M scores between the intervention and control groups (F1,17=10.9, P=.004) after controlling for baseline WheelCon-M scores. A large effect size was also observed (partial η(2)=.39). Secondary analyses revealed that the WSTP had greater effects on confidence in areas related to maneuvering around the physical environment, knowledge and problem solving, advocacy, and managing emotions than in areas related to performing activities and behaving in social situations. Two 1-hour WSTP sessions improve confidence with using a manual wheelchair among older adults who are inexperienced wheelchair users. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  6. Validation of self - confidence scale for clean urinary intermittent self - catheterization for patients and health - caregivers.

    Science.gov (United States)

    Biaziolo, Cintia Fernandes Baccarin; Mazzo, Alessandra; Martins, José Carlos Amado; Jorge, Beatriz Maria; Batista, Rui Carlos Negrão; Tucci, Silvio Júnior

    2017-01-01

    To validate a measurement instrument for clean intermittent self-catheterization for patients and health-caregivers. Methodological study of instrument validation performed at a Rehabilitation Center in a University hospital for patients submitted to clean intermittent self-catheterization and their health-caregivers. Following ethical criteria, data were collected during interview with nurse staff using a Likert question form containing 16 items with 5 points each: "no confidence"=1, "little confidence"=2, "confident"=3, "very confident"=4 and "completely confident"=5. Questionnaire called "Self- Confident Scale for Clean Intermittent Self-catheterization" (SCSCISC) was constructed based on literature and previously validated (appearance and content). The instrument was validated by 122 patients and 119 health-caregivers, in a proportion of 15:1. It was observed a good linear association and sample adequacy KMO 0.931 and X2=2881.63, p<0.001. Anti-image matrix showed high values at diagonal suggesting inclusion of all factors. Screen plot analysis showed a suggestion of items maintenance in a single set. It was observed high correlation of all items with the total, alpha-Cronbach 0.944. The same results were obtained in subsamples of patients and health-caregivers. The instrument showed good psychometric adequacy corroborating its use for evaluation of self-confidence during clean intermittent self-catheterization. Copyright® by the International Brazilian Journal of Urology.

  7. Thought confidence as a determinant of persuasion: the self-validation hypothesis.

    Science.gov (United States)

    Petty, Richard E; Briñol, Pablo; Tormala, Zakary L

    2002-05-01

    Previous research in the domain of attitude change has described 2 primary dimensions of thinking that impact persuasion processes and outcomes: the extent (amount) of thinking and the direction (valence) of issue-relevant thought. The authors examined the possibility that another, more meta-cognitive aspect of thinking is also important-the degree of confidence people have in their own thoughts. Four studies test the notion that thought confidence affects the extent of persuasion. When positive thoughts dominate in response to a message, increasing confidence in those thoughts increases persuasion, but when negative thoughts dominate, increasing confidence decreases persuasion. In addition, using self-reported and manipulated thought confidence in separate studies, the authors provide evidence that the magnitude of the attitude-thought relationship depends on the confidence people have in their thoughts. Finally, the authors also show that these self-validation effects are most likely in situations that foster high amounts of information processing activity.

  8. Development and validation of an instrument to measure nurse educator perceived confidence in clinical teaching.

    Science.gov (United States)

    Nguyen, Van N B; Forbes, Helen; Mohebbi, Mohammadreza; Duke, Maxine

    2017-12-01

    Teaching nursing in clinical environments is considered complex and multi-faceted. Little is known about the role of the clinical nurse educator, specifically the challenges related to transition from clinician, or in some cases, from newly-graduated nurse to that of clinical nurse educator, as occurs in developing countries. Confidence in the clinical educator role has been associated with successful transition and the development of role competence. There is currently no valid and reliable instrument to measure clinical nurse educator confidence. This study was conducted to develop and psychometrically test an instrument to measure perceived confidence among clinical nurse educators. A multi-phase, multi-setting survey design was used. A total of 468 surveys were distributed, and 363 were returned. Data were analyzed using exploratory and confirmatory factor analyses. The instrument was successfully tested and modified in phase 1, and factorial validity was subsequently confirmed in phase 2. There was strong evidence of internal consistency, reliability, content, and convergent validity of the Clinical Nurse Educator Skill Acquisition Assessment instrument. The resulting instrument is applicable in similar contexts due to its rigorous development and validation process. © 2017 The Authors. Nursing & Health Sciences published by John Wiley & Sons Australia, Ltd.

  9. Validation to Portuguese of the Scale of Student Satisfaction and Self-Confidence in Learning.

    Science.gov (United States)

    Almeida, Rodrigo Guimarães dos Santos; Mazzo, Alessandra; Martins, José Carlos Amado; Baptista, Rui Carlos Negrão; Girão, Fernanda Berchelli; Mendes, Isabel Amélia Costa

    2015-01-01

    Translate and validate to Portuguese the Scale of Student Satisfaction and Self-Confidence in Learning. Methodological translation and validation study of a research tool. After following all steps of the translation process, for the validation process, the event III Workshop Brazil - Portugal: Care Delivery to Critical Patients was created, promoted by one Brazilian and another Portuguese teaching institution. 103 nurses participated. As to the validity and reliability of the scale, the correlation pattern between the variables, the sampling adequacy test (Kaiser-Meyer-Olkin) and the sphericity test (Bartlett) showed good results. In the exploratory factorial analysis (Varimax), item 9 behaved better in factor 1 (Satisfaction) than in factor 2 (Self-confidence in learning). The internal consistency (Cronbach's alpha) showed coefficients of 0.86 in factor 1 with six items and 0.77 for factor 2 with 07 items. In Portuguese this tool was called: Escala de Satisfação de Estudantes e Autoconfiança na Aprendizagem. The results found good psychometric properties and a good potential use. The sampling size and specificity are limitations of this study, but future studies will contribute to consolidate the validity of the scale and strengthen its potential use.

  10. Validation to Portuguese of the Scale of Student Satisfaction and Self-Confidence in Learning1

    Science.gov (United States)

    Almeida, Rodrigo Guimarães dos Santos; Mazzo, Alessandra; Martins, José Carlos Amado; Baptista, Rui Carlos Negrão; Girão, Fernanda Berchelli; Mendes, Isabel Amélia Costa

    2015-01-01

    Objective: translate and validate to Portuguese the Scale of Student Satisfaction and Self-Confidence in Learning. Material and Methods: methodological translation and validation study of a research tool. After following all steps of the translation process, for the validation process, the event III Workshop Brazil - Portugal: Care Delivery to Critical Patients was created, promoted by one Brazilian and another Portuguese teaching institution. Results: 103 nurses participated. As to the validity and reliability of the scale, the correlation pattern between the variables, the sampling adequacy test (Kaiser-Meyer-Olkin) and the sphericity test (Bartlett) showed good results. In the exploratory factorial analysis (Varimax), item 9 behaved better in factor 1 (Satisfaction) than in factor 2 (Self-confidence in learning). The internal consistency (Cronbach's alpha) showed coefficients of 0.86 in factor 1 with six items and 0.77 for factor 2 with 07 items. Conclusion: in Portuguese this tool was called: Escala de Satisfação de Estudantes e Autoconfiança na Aprendizagem. The results found good psychometric properties and a good potential use. The sampling size and specificity are limitations of this study, but future studies will contribute to consolidate the validity of the scale and strengthen its potential use. PMID:26625990

  11. Validation to Portuguese of the Scale of Student Satisfaction and Self-Confidence in Learning

    Directory of Open Access Journals (Sweden)

    Rodrigo Guimarães dos Santos Almeida

    2015-12-01

    Full Text Available Objective: translate and validate to Portuguese the Scale of Student Satisfaction and Self-Confidence in Learning. Material and Methods: methodological translation and validation study of a research tool. After following all steps of the translation process, for the validation process, the event III Workshop Brazil - Portugal: Care Delivery to Critical Patients was created, promoted by one Brazilian and another Portuguese teaching institution. Results: 103 nurses participated. As to the validity and reliability of the scale, the correlation pattern between the variables, the sampling adequacy test (Kaiser-Meyer-Olkin and the sphericity test (Bartlett showed good results. In the exploratory factorial analysis (Varimax, item 9 behaved better in factor 1 (Satisfaction than in factor 2 (Self-confidence in learning. The internal consistency (Cronbach's alpha showed coefficients of 0.86 in factor 1 with six items and 0.77 for factor 2 with 07 items. Conclusion: in Portuguese this tool was called: Escala de Satisfação de Estudantes e Autoconfiança na Aprendizagem. The results found good psychometric properties and a good potential use. The sampling size and specificity are limitations of this study, but future studies will contribute to consolidate the validity of the scale and strengthen its potential use.

  12. Validation of self - confidence scale for clean urinary intermittent self - catheterization for patients and health - caregivers

    Directory of Open Access Journals (Sweden)

    Cintia Fernandes Baccarin Biaziolo

    Full Text Available ABSTRACT Objective To validate a measurement instrument for clean intermittent self-catheterization for patients and health-caregivers. Material and Methods Methodological study of instrument validation performed at a Rehabilitation Center in a University hospital for patients submitted to clean intermittent self-catheterization and their health-caregivers. Following ethical criteria, data were collected during interview with nurse staff using a Likert question form containing 16 items with 5 points each: “no confidence”=1, “little confidence”=2, “confident”=3, “very confident”=4 and “completely confident”=5. Questionnaire called “Self-Confident Scale for Clean Intermittent Self-catheterization” (SCSCISC was constructed based on literature and previously validated (appearance and content. Results The instrument was validated by 122 patients and 119 health-caregivers, in a proportion of 15:1. It was observed a good linear association and sample adequacy KMO 0.931 and X2=2881.63, p<0.001. Anti-image matrix showed high values at diagonal suggesting inclusion of all factors. Screen plot analysis showed a suggestion of items maintenance in a single set. It was observed high correlation of all items with the total, alpha-Cronbach 0.944. The same results were obtained in subsamples of patients and health-caregivers. Conclusion The instrument showed good psychometric adequacy corroborating its use for evaluation of self-confidence during clean intermittent self-catheterization.

  13. GPM GROUND VALIDATION ENVIRONMENT CANADA (EC) MANUAL PRECIPITATION MEASUREMENTS GCPEX V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The GPM Ground Validation Environment Canada (EC) Manual Precipitation Measurements GCPEx dataset was collected during the GPM Cold-season Precipitation Experiment...

  14. Verification steps and personal stories in an instruction manual for seniors: Effects on confidence, motivation, and usability

    NARCIS (Netherlands)

    Loorbach, N.R.; Karreman, Joyce; Steehouder, M.F.

    2013-01-01

    Research problem: The purpose of this study was to investigate the effects of two types of motivational elements—verification steps and personal stories—in an instruction manual for a cell phone targeted at senior users (between 60 and 70 years). Research questions: What are the effects of adding

  15. RisoeScan 1.0 - User manual and toolset for retrospective validation

    Energy Technology Data Exchange (ETDEWEB)

    Helt-Hansen, J

    2004-12-01

    The RisoeScan software is used for dose measurements with radiochromic films that color visibly. This report consists of two documents for use with the RisoeScan software. The User Manual tells how to use the program and the Toolset for Retrospective Validation describes how to perform a retrospective validation of the software. (au)

  16. Manual patient transfers used most often by student and staff nurses are consistent with their perceptions of transfer training, and performance confidence.

    Science.gov (United States)

    van Wyk, Paula M; Weir, Patricia L; Andrews, David M

    2015-01-01

    A disconnect in manual patient transfer (MPT) training practices for nurses, between what is taught and used in academic and clinical settings, could have implications for injury. This study aimed to determine: 1. what MPTs student and staff nurses use in clinical settings, and 2. if the MPTs used most often were also the ones they perceived that they received training for and had the most confidence performing. Survey responses from student nurses (n=163) (mid-sized university) and staff nurses (n=33) (local hospital) regarding 19 MPTs were analyzed to determine which transfers were perceived to be used most often, and which ones they had received training for and had the greatest confidence performing. The MPTs nurses perceived using most often were the same transfers they had the greatest confidence performing and for which they perceived receiving training. However, these MPTs were not taught at the university at the time of this investigation. Reducing the disconnect between manual patient transfer training obtained in the academic and clinical environments will hopefully reduce the risk of injury for nurses and improve the quality of care for patients.

  17. Development and Validation of the Personality Assessment Questionnaire: Test Manual.

    Science.gov (United States)

    Rohner, Ronald P.; And Others

    Data are presented evaluating the validity and reliability of the Personality Assessment Questionnaire (PAQ), a self-report questionnaire designed to elicit respondents' perceptions of themselves with respect to seven personality and behavioral dispositions: hostility and aggression, dependence, self-esteem, self-adequacy, emotional…

  18. DBCG hypo trial validation of radiotherapy parameters from a national data bank versus manual reporting

    DEFF Research Database (Denmark)

    Brink, Carsten; Lorenzen, Ebbe L; Krogh, Simon Long

    2018-01-01

    of dose information, since the two patients had been treated with an electron boost based on a manual calculation, thus data was not exported to the data bank, and this was not detected prior to comparison with the manual data. For a few database fields in the manual data an ambiguity of the parameter...... definition of the specific field is seen in the data. This was not the case for the data bank, which extract all data consistently. CONCLUSIONS: In terms of data quality the data bank is superior to manually reported values. However, there is a need to allocate resources for checking the validity...... of the available data as well as ensuring that all relevant data is present. The data bank contains more detailed information, and thus facilitates research related to the actual dose distribution in the patients....

  19. Validity of a manual soft tissue profile prediction method following mandibular setback osteotomy.

    Science.gov (United States)

    Kolokitha, Olga-Elpis

    2007-10-01

    The aim of this study was to determine the validity of a manual cephalometric method used for predicting the post-operative soft tissue profiles of patients who underwent mandibular setback surgery and compare it to a computerized cephalometric prediction method (Dentofacial Planner). Lateral cephalograms of 18 adults with mandibular prognathism taken at the end of pre-surgical orthodontics and approximately one year after surgery were used. To test the validity of the manual method the prediction tracings were compared to the actual post-operative tracings. The Dentofacial Planner software was used to develop the computerized post-surgical prediction tracings. Both manual and computerized prediction printouts were analyzed by using the cephalometric system PORDIOS. Statistical analysis was performed by means of t-test. Comparison between manual prediction tracings and the actual post-operative profile showed that the manual method results in more convex soft tissue profiles; the upper lip was found in a more prominent position, upper lip thickness was increased and, the mandible and lower lip were found in a less posterior position than that of the actual profiles. Comparison between computerized and manual prediction methods showed that in the manual method upper lip thickness was increased, the upper lip was found in a more anterior position and the lower anterior facial height was increased as compared to the computerized prediction method. Cephalometric simulation of post-operative soft tissue profile following orthodontic-surgical management of mandibular prognathism imposes certain limitations related to the methods implied. However, both manual and computerized prediction methods remain a useful tool for patient communication.

  20. Validity of a Manual Soft Tissue Profile Prediction Method Following Mandibular Setback Osteotomy

    OpenAIRE

    Kolokitha, Olga-Elpis

    2007-01-01

    Objectives The aim of this study was to determine the validity of a manual cephalometric method used for predicting the post-operative soft tissue profiles of patients who underwent mandibular setback surgery and compare it to a computerized cephalometric prediction method (Dentofacial Planner). Lateral cephalograms of 18 adults with mandibular prognathism taken at the end of pre-surgical orthodontics and approximately one year after surgery were used. Methods To test the validity of the manu...

  1. Validation of an educative manual for patients with head and neck cancer submitted to radiation therapy

    Directory of Open Access Journals (Sweden)

    Flávia Oliveira de Almeida Marques da Cruz

    2016-01-01

    Full Text Available Abstract Objective: develop the content and face validation of an educative manual for patients with head and neck cancer submitted to radiation therapy. Method: descriptive methodological research. The Theory of Psychometrics was used for the validation process, developed by 15 experts in the theme area of the educative manual and by two language and publicity professionals. A minimum agreement level of 80% was considered to guarantee the validity of the material. Results: the items addressed in the assessment tool of the educative manual were divided in three blocks: objectives, structure and format, and relevance. Only one item, related to the sociocultural level of the target public, obtained an agreement rate <80%, and was reformulated based on the participants' suggestions. All other items were considered appropriate and/or complete appropriate in the three blocks proposed: objectives - 92.38%, structure and form - 89.74%, and relevance - 94.44%. Conclusion: the face and content validation of the educative manual proposed were attended to. This can contribute to the understanding of the therapeutic process the head and neck cancer patient is submitted to during the radiation therapy, besides supporting clinical practice through the nursing consultation.

  2. RisøScan 1.0 - User manual and toolset for retrospective validation

    DEFF Research Database (Denmark)

    Helt-Hansen, Jakob

    2004-01-01

    The RisøScan software is used for dose measurements with radiochromic films that color visibly. This report consists of two documents for use with the RisøScan software. The User Manual tells how to use the program and the Toolset for RetrospectiveValidation describes how to perform a retrospective...

  3. Reliability and validity of food portion size estimation from images using manual flexible digital virtual meshes

    Science.gov (United States)

    The eButton takes frontal images at 4 second intervals throughout the day. A three-dimensional (3D) manually administered wire mesh procedure has been developed to quantify portion sizes from the two-dimensional (2D) images. This paper reports a test of the interrater reliability and validity of use...

  4. Validity and test-retest reliability of manual goniometers for measuring passive hip range of motion in femoroacetabular impingement patients.

    Directory of Open Access Journals (Sweden)

    Nussbaumer Silvio

    2010-08-01

    Full Text Available Abstract Background The aims of this study were to evaluate the construct validity (known group, concurrent validity (criterion based and test-retest (intra-rater reliability of manual goniometers to measure passive hip range of motion (ROM in femoroacetabular impingement patients and healthy controls. Methods Passive hip flexion, abduction, adduction, internal and external rotation ROMs were simultaneously measured with a conventional goniometer and an electromagnetic tracking system (ETS on two different testing sessions. A total of 15 patients and 15 sex- and age-matched healthy controls participated in the study. Results The goniometer provided greater hip ROM values compared to the ETS (range 2.0-18.9 degrees; P P Conclusions The present study suggests that goniometer-based assessments considerably overestimate hip joint ROM by measuring intersegmental angles (e.g., thigh flexion on trunk for hip flexion rather than true hip ROM. It is likely that uncontrolled pelvic rotation and tilt due to difficulties in placing the goniometer properly and in performing the anatomically correct ROM contribute to the overrating of the arc of these motions. Nevertheless, conventional manual goniometers can be used with confidence for longitudinal assessments in the clinic.

  5. Validation of an instrument to assess evidence-based practice knowledge, attitudes, access, and confidence in the dental environment.

    Science.gov (United States)

    Hendricson, William D; Rugh, John D; Hatch, John P; Stark, Debra L; Deahl, Thomas; Wallmann, Elizabeth R

    2011-02-01

    This article reports the validation of an assessment instrument designed to measure the outcomes of training in evidence-based practice (EBP) in the context of dentistry. Four EBP dimensions are measured by this instrument: 1) understanding of EBP concepts, 2) attitudes about EBP, 3) evidence-accessing methods, and 4) confidence in critical appraisal. The instrument-the Knowledge, Attitudes, Access, and Confidence Evaluation (KACE)-has four scales, with a total of thirty-five items: EBP knowledge (ten items), EBP attitudes (ten), accessing evidence (nine), and confidence (six). Four elements of validity were assessed: consistency of items within the KACE scales (extent to which items within a scale measure the same dimension), discrimination (capacity to detect differences between individuals with different training or experience), responsiveness (capacity to detect the effects of education on trainees), and test-retest reliability. Internal consistency of scales was assessed by analyzing responses of second-year dental students, dental residents, and dental faculty members using Cronbach coefficient alpha, a statistical measure of reliability. Discriminative validity was assessed by comparing KACE scores for the three groups. Responsiveness was assessed by comparing pre- and post-training responses for dental students and residents. To measure test-retest reliability, the full KACE was completed twice by a class of freshman dental students seventeen days apart, and the knowledge scale was completed twice by sixteen faculty members fourteen days apart. Item-to-scale consistency ranged from 0.21 to 0.78 for knowledge, 0.57 to 0.83 for attitude, 0.70 to 0.84 for accessing evidence, and 0.87 to 0.94 for confidence. For discrimination, ANOVA and post hoc testing by the Tukey-Kramer method revealed significant score differences among students, residents, and faculty members consistent with education and experience levels. For responsiveness to training, dental students

  6. DBCG hypo trial validation of radiotherapy parameters from a national data bank versus manual reporting.

    Science.gov (United States)

    Brink, Carsten; Lorenzen, Ebbe L; Krogh, Simon Long; Westberg, Jonas; Berg, Martin; Jensen, Ingelise; Thomsen, Mette Skovhus; Yates, Esben Svitzer; Offersen, Birgitte Vrou

    2018-01-01

    The current study evaluates the data quality achievable using a national data bank for reporting radiotherapy parameters relative to the classical manual reporting method of selected parameters. The data comparison is based on 1522 Danish patients of the DBCG hypo trial with data stored in the Danish national radiotherapy data bank. In line with standard DBCG trial practice selected parameters were also reported manually to the DBCG database. Categorical variables are compared using contingency tables, and comparison of continuous parameters is presented in scatter plots. For categorical variables 25 differences between the data bank and manual values were located. Of these 23 were related to mistakes in the manual reported value whilst the remaining two were a wrong classification in the data bank. The wrong classification in the data bank was related to lack of dose information, since the two patients had been treated with an electron boost based on a manual calculation, thus data was not exported to the data bank, and this was not detected prior to comparison with the manual data. For a few database fields in the manual data an ambiguity of the parameter definition of the specific field is seen in the data. This was not the case for the data bank, which extract all data consistently. In terms of data quality the data bank is superior to manually reported values. However, there is a need to allocate resources for checking the validity of the available data as well as ensuring that all relevant data is present. The data bank contains more detailed information, and thus facilitates research related to the actual dose distribution in the patients.

  7. Automatic, semi-automatic and manual validation of urban drainage data.

    Science.gov (United States)

    Branisavljević, N; Prodanović, D; Pavlović, D

    2010-01-01

    Advances in sensor technology and the possibility of automated long distance data transmission have made continuous measurements the preferable way of monitoring urban drainage processes. Usually, the collected data have to be processed by an expert in order to detect and mark the wrong data, remove them and replace them with interpolated data. In general, the first step in detecting the wrong, anomaly data is called the data quality assessment or data validation. Data validation consists of three parts: data preparation, validation scores generation and scores interpretation. This paper will present the overall framework for the data quality improvement system, suitable for automatic, semi-automatic or manual operation. The first two steps of the validation process are explained in more detail, using several validation methods on the same set of real-case data from the Belgrade sewer system. The final part of the validation process, which is the scores interpretation, needs to be further investigated on the developed system.

  8. An introduction to use of the USACE HTRW program's data validation guidelines engineering manual

    International Nuclear Information System (INIS)

    Becker, L.D.; Coats, K.H.

    1994-01-01

    Data validation has been defined by regulatory agencies as a systematic process (consisting of data editing, screening, checking, auditing, verification, certification, and review) for comparing data to established criteria in order to provide assurance that data are adequate for their intended use. A problem for the USACE HTRW Program was that clearly defined data validation guidelines were available only for analytical data quality level IV. These functional data validation guidelines were designed for validation of data produced using protocols from the US E.P.A.'s Contract Laboratory Program (CLP). Unfortunately, USACE experience demonstrates that these level IV functional data validation guidelines were being used to validate data not produced under the CLP. The resulting data validation product was less than satisfactory for USACE HTRW needs. Therefore, the HTRW-MCX initiated an Engineering Manual (EM) for validation of analytical data quality levels other than IV. This EM is entitle ''USACE HTRW Data Validation Guidelines.'' Use of the EM is required for validation of analytical data relating to projects under the jurisdiction of the Department of the Army, Corps of Engineers, Hazardous, Toxic, and Radioactive Waste Program. These data validation guidelines include procedures and checklists for technical review of analytical data at quality levels I, II, III, and V

  9. Validity of the Mexican version of the combined Foot Care Confidence / Foot-Care Behavior scale for diabetes

    Directory of Open Access Journals (Sweden)

    Jaime A. García-Inzunza

    2015-07-01

    Full Text Available OBJECTIVE: To 1 translate / transculturally adapt the original (English-language combined Foot Care Confidence Scale / Foot-Care Behavior instrument (FCCS-FCB to produce a Mexican-Spanish version and 2 determine its validity and reliability in a population with diabetes in Tijuana, Mexico. METHODS: The original FCCS-FCB was translated (and back-translated, the content validated (by a group of health professional experts, and the instrument applied to 304 patients 23-78 years old in diabetes support groups in Tijuana, Mexico. Internal consistency for the study constructs ("self-efficacy," and risk / preventive foot self-care behaviors was measured using Cronbach's alpha. The constructs were validated using principal component factor analysis. RESULTS: The Cronbach's alpha values for internal consistency were 0.782 for self-efficacy and 0.505 for behaviors. Based on the analysis, two factors explained 49.1% of the total variance for self-efficacy, and six factors explained 57.7% of the total variance for behaviors. The results were consistent with those for the original (English version of the FCCS-FCB. CONCLUSIONS: The Mexican version of the FCCS-FCB is a reliable and valid instrument recommended for use with Mexican-Spanish-speaking patients with diabetes.

  10. Validation of an educative manual for patients with head and neck cancer submitted to radiation therapy.

    Science.gov (United States)

    Cruz, Flávia Oliveira de Almeida Marques da; Ferreira, Elaine Barros; Vasques, Christiane Inocêncio; Mata, Luciana Regina Ferreira da; Reis, Paula Elaine Diniz Dos

    2016-06-14

    develop the content and face validation of an educative manual for patients with head and neck cancer submitted to radiation therapy. descriptive methodological research. The Theory of Psychometrics was used for the validation process, developed by 15 experts in the theme area of the educative manual and by two language and publicity professionals. A minimum agreement level of 80% was considered to guarantee the validity of the material. the items addressed in the assessment tool of the educative manual were divided in three blocks: objectives, structure and format, and relevance. Only one item, related to the sociocultural level of the target public, obtained an agreement rate publicidade. Foi considerado o índice de concordância de, no mínimo, 80% para se garantir a validação do material. os itens abordados no instrumento de avaliação do manual educativo foram divididos em três blocos: objetivos, estrutura e apresentação, e relevância. Apenas um item, relacionado ao nível sociocultural do público-alvo, obteve índice de concordância publicidad. Fue considerado un índice de concordancia que fuese, por lo menos, de 80%, para garantizar la validación del material. los ítems abordados en el instrumento de evaluación del manual educativo fueron divididos en tres bloques: objetivos, estructura y presentación, y relevancia. Apenas un ítem, relacionado al nivel sociocultural del público-objetivo, obtuvo un índice de concordancia <80%, habiendo sido reformulado con base en las sugestiones de los participantes. Todos los otros ítems fueron considerados adecuados y/o totalmente adecuados en los tres bloques propuestos: objetivos (92,38%), estructura y presentación (89,74%), y relevancia (94,44%). el manual educativo propuesto fue considerado válido en lo que se refiere al contenido y a la apariencia. Se sugiere que puede contribuir para la comprensión del proceso terapéutico, al cual el paciente con cáncer de cabeza y cuello es sometido al

  11. Valid and efficient manual estimates of intracranial volume from magnetic resonance images

    International Nuclear Information System (INIS)

    Klasson, Niklas; Olsson, Erik; Rudemo, Mats; Eckerström, Carl; Malmgren, Helge; Wallin, Anders

    2015-01-01

    Manual segmentations of the whole intracranial vault in high-resolution magnetic resonance images are often regarded as very time-consuming. Therefore it is common to only segment a few linearly spaced intracranial areas to estimate the whole volume. The purpose of the present study was to evaluate how the validity of intracranial volume estimates is affected by the chosen interpolation method, orientation of the intracranial areas and the linear spacing between them. Intracranial volumes were manually segmented on 62 participants from the Gothenburg MCI study using 1.5 T, T 1 -weighted magnetic resonance images. Estimates of the intracranial volumes were then derived using subsamples of linearly spaced coronal, sagittal or transversal intracranial areas from the same volumes. The subsamples of intracranial areas were interpolated into volume estimates by three different interpolation methods. The linear spacing between the intracranial areas ranged from 2 to 50 mm and the validity of the estimates was determined by comparison with the entire intracranial volumes. A progressive decrease in intra-class correlation and an increase in percentage error could be seen with increased linear spacing between intracranial areas. With small linear spacing (≤15 mm), orientation of the intracranial areas and interpolation method had negligible effects on the validity. With larger linear spacing, the best validity was achieved using cubic spline interpolation with either coronal or sagittal intracranial areas. Even at a linear spacing of 50 mm, cubic spline interpolation on either coronal or sagittal intracranial areas had a mean absolute agreement intra-class correlation with the entire intracranial volumes above 0.97. Cubic spline interpolation in combination with linearly spaced sagittal or coronal intracranial areas overall resulted in the most valid and robust estimates of intracranial volume. Using this method, valid ICV estimates could be obtained in less than five

  12. User's Manual for Data for Validating Models for PV Module Performance

    Energy Technology Data Exchange (ETDEWEB)

    Marion, W.; Anderberg, A.; Deline, C.; Glick, S.; Muller, M.; Perrin, G.; Rodriguez, J.; Rummel, S.; Terwilliger, K.; Silverman, T. J.

    2014-04-01

    This user's manual describes performance data measured for flat-plate photovoltaic (PV) modules installed in Cocoa, Florida, Eugene, Oregon, and Golden, Colorado. The data include PV module current-voltage curves and associated meteorological data for approximately one-year periods. These publicly available data are intended to facilitate the validation of existing models for predicting the performance of PV modules, and for the development of new and improved models. For comparing different modeling approaches, using these public data will provide transparency and more meaningful comparisons of the relative benefits.

  13. Validation of an educative manual for patients with head and neck cancer submitted to radiation therapy 1

    Science.gov (United States)

    da Cruz, Flávia Oliveira de Almeida Marques; Ferreira, Elaine Barros; Vasques, Christiane Inocêncio; da Mata, Luciana Regina Ferreira; dos Reis, Paula Elaine Diniz

    2016-01-01

    Abstract Objective: develop the content and face validation of an educative manual for patients with head and neck cancer submitted to radiation therapy. Method: descriptive methodological research. The Theory of Psychometrics was used for the validation process, developed by 15 experts in the theme area of the educative manual and by two language and publicity professionals. A minimum agreement level of 80% was considered to guarantee the validity of the material. Results: the items addressed in the assessment tool of the educative manual were divided in three blocks: objectives, structure and format, and relevance. Only one item, related to the sociocultural level of the target public, obtained an agreement rate manual proposed were attended to. This can contribute to the understanding of the therapeutic process the head and neck cancer patient is submitted to during the radiation therapy, besides supporting clinical practice through the nursing consultation. PMID:27305178

  14. Radiological findings for hip dysplasia at skeletal maturity. Validation of digital and manual measurement techniques

    Energy Technology Data Exchange (ETDEWEB)

    Engesaeter, Ingvild Oevsteboe [University of Bergen, Department of Surgical Sciences, Bergen (Norway); Haukeland University Hospital, Department of Orthopaedic Surgery, Bergen (Norway); Haukeland University Hospital, Department of Radiology, Bergen (Norway); Haukeland University Hospital, The Norwegian Arthroplasty Register, Department of Orthopaedic Surgery, Bergen (Norway); Laborie, Lene Bjerke; Rosendahl, Karen [University of Bergen, Department of Surgical Sciences, Bergen (Norway); Haukeland University Hospital, Department of Radiology, Bergen (Norway); Lehmann, Trude Gundersen; Fevang, Jonas; Engesaeter, Lars Birger [University of Bergen, Department of Surgical Sciences, Bergen (Norway); Haukeland University Hospital, Department of Orthopaedic Surgery, Bergen (Norway); Sera, Francesco [University College London Institute of Child Health, Medical Research Council Centre of Epidemiology for Child Health, London (United Kingdom); Pedersen, Douglas; Morcuende, Jose [University of Iowa Hospital and Clinics, Department of Orthopaedics and Rehabilitation, Iowa City, IA (United States); Lie, Stein Atle [Uni Health, Uni Research, Bergen (Norway)

    2012-07-15

    To report on intra-observer, inter-observer, and inter-method reliability and agreement for radiological measurements used in the diagnosis of hip dysplasia at skeletal maturity, as obtained by a manual and a digital measurement technique. Pelvic radiographs from 95 participants (56 females) in a follow-up hip study of 18- to 19-year-old patients were included. Eleven radiological measurements relevant for hip dysplasia (Sharp's, Wiberg's, and Ogata's angles; acetabular roof angle of Toennis; articulo-trochanteric distance; acetabular depth-width ratio; femoral head extrusion index; maximum teardrop width; and the joint space width in three different locations) were validated. Three observers measured the radiographs using both a digital measurement program and manually in AgfaWeb1000. Inter-method and inter- and intra-observer agreement were analyzed using the mean differences between the readings/readers, establishing the 95% limits of agreement. We also calculated the minimum detectable change and the intra-class correlation coefficient. Large variations among different radiological measurements were demonstrated. However, the variation was not related to the use of either the manual or digital measurement technique. For measurements with greater absolute values (Sharp's angle, femoral head extrusion index, and acetabular depth-width ratio) the inter- and intra-observer and inter-method agreements were better as compared to measurements with lower absolute values (acetabular roof angle, teardrop and joint space width). The inter- and intra-observer variation differs notably across different radiological measurements relevant for hip dysplasia at skeletal maturity, a fact that should be taken into account in clinical practice. The agreement between the manual and digital methods is good. (orig.)

  15. Radiological findings for hip dysplasia at skeletal maturity. Validation of digital and manual measurement techniques.

    Science.gov (United States)

    Engesæter, Ingvild Øvstebø; Laborie, Lene Bjerke; Lehmann, Trude Gundersen; Sera, Francesco; Fevang, Jonas; Pedersen, Douglas; Morcuende, José; Lie, Stein Atle; Engesæter, Lars Birger; Rosendahl, Karen

    2012-07-01

    To report on intra-observer, inter-observer, and inter-method reliability and agreement for radiological measurements used in the diagnosis of hip dysplasia at skeletal maturity, as obtained by a manual and a digital measurement technique. Pelvic radiographs from 95 participants (56 females) in a follow-up hip study of 18- to 19-year-old patients were included. Eleven radiological measurements relevant for hip dysplasia (Sharp's, Wiberg's, and Ogata's angles; acetabular roof angle of Tönnis; articulo-trochanteric distance; acetabular depth-width ratio; femoral head extrusion index; maximum teardrop width; and the joint space width in three different locations) were validated. Three observers measured the radiographs using both a digital measurement program and manually in AgfaWeb1000. Inter-method and inter- and intra-observer agreement were analyzed using the mean differences between the readings/readers, establishing the 95% limits of agreement. We also calculated the minimum detectable change and the intra-class correlation coefficient. Large variations among different radiological measurements were demonstrated. However, the variation was not related to the use of either the manual or digital measurement technique. For measurements with greater absolute values (Sharp's angle, femoral head extrusion index, and acetabular depth-width ratio) the inter- and intra-observer and inter-method agreements were better as compared to measurements with lower absolute values (acetabular roof angle, teardrop and joint space width). The inter- and intra-observer variation differs notably across different radiological measurements relevant for hip dysplasia at skeletal maturity, a fact that should be taken into account in clinical practice. The agreement between the manual and digital methods is good.

  16. The short version of the Activities-specific Balance Confidence (ABC) scale: Its validity, reliability, and relationship to balance impairment and falls in older adults

    OpenAIRE

    Schepens, Stacey; Goldberg, Allon; Wallace, Melissa

    2009-01-01

    A shortened version of the ABC 16-item scale (ABC-16), the ABC-6, has been proposed as an alternative balance confidence measure. We investigated whether the ABC-6 is a valid and reliable measure of balance confidence and examined its relationship to balance impairment and falls in older adults. Thirty-five community-dwelling older adults completed the ABC-16, including the six questions of the ABC-6. They also completed the following clinical balance tests: unipedal stance time (UST), functi...

  17. Target motion measurement without implanted markers and its validation by comparison with manually obtained data

    International Nuclear Information System (INIS)

    Vences, Lucia; Wulf, Joern; Vordermark, Dirk; Sauer, Otto; Berlinger, Kajetan; Roth, Michael

    2005-01-01

    For an effective radiotherapy the exact tumor location must be determined. The localization has to take into account patient's setup position as well as internal organ motion. Among the different localization methods, the use of a computer tomography (CT) scanner in the therapy room has been proposed recently. Achieving a CT with the patient on the therapy couch, a patient's treatment position is captured. We present a method to locate tumor considering internal organ motion and displacements due to respiration. We tested the method with prostate and lung patients. The method found the most probable tumor position as well as, for high-mobility tumors located in the lung, its trajectory during the respiratory cycle. The results of this novel method were validated by comparison with manually determined target position

  18. The short version of the Activities-specific Balance Confidence (ABC) scale: its validity, reliability, and relationship to balance impairment and falls in older adults.

    Science.gov (United States)

    Schepens, Stacey; Goldberg, Allon; Wallace, Melissa

    2010-01-01

    A shortened version of the ABC 16-item scale (ABC-16), the ABC-6, has been proposed as an alternative balance confidence measure. We investigated whether the ABC-6 is a valid and reliable measure of balance confidence and examined its relationship to balance impairment and falls in older adults. Thirty-five community-dwelling older adults completed the ABC-16, including the 6 questions of the ABC-6. They also completed the following clinical balance tests: unipedal stance time (UST), functional reach (FR), Timed Up and Go (TUG), and maximum step length (MSL). Participants reported 12-month falls history. Balance confidence on the ABC-6 was significantly lower than on the ABC-16, however scores were highly correlated. Fallers reported lower balance confidence than non-fallers as measured by the ABC-6 scale, but confidence did not differ between the groups with the ABC-16. The ABC-6 significantly correlated with all balance tests assessed and number of falls. The ABC-16 significantly correlated with all balance tests assessed, but not with number of falls. Test-retest reliability for the ABC-16 and ABC-6 was good to excellent. The ABC-6 is a valid and reliable measure of balance confidence in community-dwelling older adults, and shows stronger relationships to falls than does the ABC-16. The ABC-6 may be a more useful balance confidence assessment tool than the ABC-16. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

  19. The reliability and validity of three questionnaires: The Student Satisfaction and Self-Confidence in Learning Scale, Simulation Design Scale, and Educational Practices Questionnaire.

    Science.gov (United States)

    Unver, Vesile; Basak, Tulay; Watts, Penni; Gaioso, Vanessa; Moss, Jacqueline; Tastan, Sevinc; Iyigun, Emine; Tosun, Nuran

    2017-02-01

    The purpose of this study was to adapt the "Student Satisfaction and Self-Confidence in Learning Scale" (SCLS), "Simulation Design Scale" (SDS), and "Educational Practices Questionnaire" (EPQ) developed by Jeffries and Rizzolo into Turkish and establish the reliability and the validity of these translated scales. A sample of 87 nursing students participated in this study. These scales were cross-culturally adapted through a process including translation, comparison with original version, back translation, and pretesting. Construct validity was evaluated by factor analysis, and criterion validity was evaluated using the Perceived Learning Scale, Patient Intervention Self-confidence/Competency Scale, and Educational Belief Scale. Cronbach's alpha values were found as 0.77-0.85 for SCLS, 0.73-0.86 for SDS, and 0.61-0.86 for EPQ. The results of this study show that the Turkish versions of all scales are validated and reliable measurement tools.

  20. A predeployment trauma team training course creates confidence in teamwork and clinical skills: a post-Afghanistan deployment validation study of Canadian Forces healthcare personnel.

    Science.gov (United States)

    McLaughlin, Thomas; Hennecke, Peter; Garraway, Naisan Robert; Evans, David C; Hameed, Morad; Simons, Richard K; Doucet, Jay; Hansen, Daniel; Annand, Siobhan; Bell, Nathaniel; Brown, D Ross

    2011-11-01

    The 10-day Intensive Trauma Team Training Course (ITTTC) was developed by the Canadian Forces (CFs) to teach teamwork and clinical trauma skills to military healthcare personnel before deploying to Afghanistan. This article attempts to validate the impact of the ITTTC by surveying participants postdeployment. A survey consisting of Likert-type multiple-choice questions was created and sent to all previous ITTTC participants. The survey asked respondents to rate their confidence in applying teamwork skills and clinical skills learned in the ITTTC. It explored the relevancy of objectives and participants' prior familiarity with the objectives. The impact of different training modalities was also surveyed. The survey showed that on average 84.29% of participants were "confident" or "very confident" in applying teamwork skills to their subsequent clinical experience and 52.10% were "confident" or "very confident" in applying clinical knowledge and skills. On average 43.74% of participants were "familiar" or "very familiar" with the clinical topics before the course, indicating the importance of training these skills. Participants found that clinical shadowing was significantly less valuable in training clinical skills than either animal laboratory experience or experience in human patient simulators; 68.57% respondents thought that ITTTC was "important" or "very important" in their training. The ITTTC created lasting self-reported confidence in CFs healthcare personnel surveyed upon return from Afghanistan. This validates the importance of the course for the training of CFs healthcare personnel and supports the value of team training in other areas of trauma and medicine.

  1. JacketSE: An Offshore Wind Turbine Jacket Sizing Tool; Theory Manual and Sample Usage with Preliminary Validation

    Energy Technology Data Exchange (ETDEWEB)

    Damiani, Rick [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-08

    This manual summarizes the theory and preliminary verifications of the JacketSE module, which is an offshore jacket sizing tool that is part of the Wind-Plant Integrated System Design & Engineering Model toolbox. JacketSE is based on a finite-element formulation and on user-prescribed inputs and design standards' criteria (constraints). The physics are highly simplified, with a primary focus on satisfying ultimate limit states and modal performance requirements. Preliminary validation work included comparing industry data and verification against ANSYS, a commercial finite-element analysis package. The results are encouraging, and future improvements to the code are recommended in this manual.

  2. The Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition Defensive Functioning Scale: a validity study.

    Science.gov (United States)

    Porcerelli, John H; Cogan, Rosemary; Markova, Tsveti; Miller, Kristen; Mickens, Lavonda

    2011-01-01

    We assess the convergent and predictive validity of the Defensive Functioning Scale (DFS) with measures of life events, including childhood abuse and adult partner victimization; dimensions of psychopathology, including axis I (depressive) and axis II (borderline personality disorder) symptoms; and quality of object relations. One hundred and ten women from a university-based urban primary care clinic completed a research interview from which defense mechanisms were assessed. The quality of object relations was also assessed from interview data. The women completed self-report measures assessing depression, borderline personality disorder symptoms, childhood physical and sexual abuse, and adult partner physical and sexual victimization. Inter-rater reliability of the scoring of the DFS levels was good. High adaptive defenses were positively correlated with the quality of object relations and pathological defenses were positively correlated with childhood and adult victimization and symptom measures. Although major image distorting defenses were infrequently used, they were robustly correlated with all study variables. In a stepwise multiple regression analysis, major image distorting defenses, depressive symptoms, and minor image distorting defenses significantly predict childhood victimization, accounting for 37% of the variance. In a second stepwise multiple regression analysis, borderline personality disorder symptoms and disavowal defenses combined to significantly predict adult victimization, accounting for 16% of the variance. The DFS demonstrates good convergent validity with axis I and axis II symptoms, as well as with measures of childhood and adult victimization and object relations. The DFS levels add nonredundant information to Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition beyond axis I and axis II. Copyright © 2011 Elsevier Inc. All rights reserved.

  3. Consumer confidence in the safety of food in Canada and the Netherlands: The validation of a generic framework

    NARCIS (Netherlands)

    Jonge, de J.; Trijp, van J.C.M.; Goddard, E.; Frewer, L.J.

    2008-01-01

    A thorough understanding of consumer confidence in the safety of food and the factors by which this is influenced is necessary for the development of adequate and effective risk management and communication regarding food safety issues. As food chains become globalized, risk management and

  4. Comparison of 3D laser-based photonic scans and manual anthropometric measurements of body size and shape in a validation study of 123 young Swiss men

    Directory of Open Access Journals (Sweden)

    Nikola Koepke

    2017-02-01

    Full Text Available Background Manual anthropometric measurements are time-consuming and challenging to perform within acceptable intra- and inter-individual error margins in large studies. Three-dimensional (3D laser body scanners provide a fast and precise alternative: within a few seconds the system produces a 3D image of the body topography and calculates some 150 standardised body size measurements. Objective The aim was to enhance the small number of existing validation studies and compare scan and manual techniques based on five selected measurements. We assessed the agreement between two repeated measurements within the two methods, analysed the direct agreement between the two methods, and explored the differences between the techniques when used in regressions assessing the effect of health related determinants on body shape indices. Methods We performed two repeated body scans on 123 volunteering young men using a Vitus Smart XXL body scanner. We manually measured height, waist, hip, buttock, and chest circumferences twice for each participant according to the WHO guidelines. The participants also filled in a basic questionnaire. Results Mean differences between the two scan measurements were smaller than between the two manual measurements, and precision as well as intra-class correlation coefficients were higher. Both techniques were strongly correlated. When comparing means between both techniques we found significant differences: Height was systematically shorter by 2.1 cm, whereas waist, hip and bust circumference measurements were larger in the scans by 1.17–4.37 cm. In consequence, body shape indices also became larger and the prevalence of overweight was greater when calculated from the scans. Between 4.1% and 7.3% of the probands changed risk category from normal to overweight when classified based on the scans. However, when employing regression analyses the two measurement techniques resulted in very similar coefficients, confidence

  5. The EADC-ADNI Harmonized Protocol for manual hippocampal segmentation on magnetic resonance: Evidence of validity

    Science.gov (United States)

    Frisoni, Giovanni B.; Jack, Clifford R.; Bocchetta, Martina; Bauer, Corinna; Frederiksen, Kristian S.; Liu, Yawu; Preboske, Gregory; Swihart, Tim; Blair, Melanie; Cavedo, Enrica; Grothe, Michel J.; Lanfredi, Mariangela; Martinez, Oliver; Nishikawa, Masami; Portegies, Marileen; Stoub, Travis; Ward, Chadwich; Apostolova, Liana G.; Ganzola, Rossana; Wolf, Dominik; Barkhof, Frederik; Bartzokis, George; DeCarli, Charles; Csernansky, John G.; deToledo-Morrell, Leyla; Geerlings, Mirjam I.; Kaye, Jeffrey; Killiany, Ronald J.; Lehéricy, Stephane; Matsuda, Hiroshi; O'Brien, John; Silbert, Lisa C.; Scheltens, Philip; Soininen, Hilkka; Teipel, Stefan; Waldemar, Gunhild; Fellgiebel, Andreas; Barnes, Josephine; Firbank, Michael; Gerritsen, Lotte; Henneman, Wouter; Malykhin, Nikolai; Pruessner, Jens C.; Wang, Lei; Watson, Craig; Wolf, Henrike; deLeon, Mony; Pantel, Johannes; Ferrari, Clarissa; Bosco, Paolo; Pasqualetti, Patrizio; Duchesne, Simon; Duvernoy, Henri; Boccardi, Marina

    2015-01-01

    Background An international Delphi panel has defined a harmonized protocol (HarP) for the manual segmentation of the hippocampus on MR. The aim of this study is to study the concurrent validity of the HarP toward local protocols, and its major sources of variance. Methods Fourteen tracers segmented 10 Alzheimer's Disease Neuroimaging Initiative (ADNI) cases scanned at 1.5 T and 3T following local protocols, qualified for segmentation based on the HarP through a standard web-platform and resegmented following the HarP. The five most accurate tracers followed the HarP to segment 15 ADNI cases acquired at three time points on both 1.5 T and 3T. Results The agreement among tracers was relatively low with the local protocols (absolute left/right ICC 0.44/0.43) and much higher with the HarP (absolute left/right ICC 0.88/0.89). On the larger set of 15 cases, the HarP agreement within (left/right ICC range: 0.94/0.95 to 0.99/0.99) and among tracers (left/right ICC range: 0.89/0.90) was very high. The volume variance due to different tracers was 0.9% of the total, comparing favorably to variance due to scanner manufacturer (1.2), atrophy rates (3.5), hemispheric asymmetry (3.7), field strength (4.4), and significantly smaller than the variance due to atrophy (33.5%, P < .001), and physiological variability (49.2%, P < .001). Conclusions The HarP has high measurement stability compared with local segmentation protocols, and good reproducibility within and among human tracers. Hippocampi segmented with the HarP can be used as a reference for the qualification of human tracers and automated segmentation algorithms. PMID:25267715

  6. Test re-test reliability and construct validity of the star-track test of manual dexterity

    DEFF Research Database (Denmark)

    Kildebro, Niels; Amirian, Ilda; Gögenur, Ismail

    2015-01-01

    Objectives. We wished to determine test re-test reliability and construct validity of the star-track test of manual dexterity. Design. Test re-test reliability was examined in a controlled study. Construct validity was tested in a blinded randomized crossover study. Setting. The study was performed...... at a university hospital in Denmark. Participants. A total of 11 subjects for test re-test and 20 subjects for the construct validity study were included. All subjects were healthy volunteers. Intervention. The test re-test trial had two measurements with 2 days pause in between. The interventions...... in the construct validity study included baseline measurement, intervention 1: fatigue, intervention 2: stress, and intervention 3: fatigue and stress. There was a 2 day pause between each intervention. Main outcome measure. An integrated measure of completion time and number of errors was used. Results. All...

  7. Validating New Software for Semiautomated Liver Volumetry--Better than Manual Measurement?

    Science.gov (United States)

    Noschinski, L E; Maiwald, B; Voigt, P; Wiltberger, G; Kahn, T; Stumpp, P

    2015-09-01

    This prospective study compared a manual program for liver volumetry with semiautomated software. The hypothesis was that the semiautomated software would be faster, more accurate and less dependent on the evaluator's experience. Ten patients undergoing hemihepatectomy were included in this IRB approved study after written informed consent. All patients underwent a preoperative abdominal 3-phase CT scan, which was used for whole liver volumetry and volume prediction for the liver part to be resected. Two different types of software were used: 1) manual method: borders of the liver had to be defined per slice by the user; 2) semiautomated software: automatic identification of liver volume with manual assistance for definition of Couinaud segments. Measurements were done by six observers with different experience levels. Water displacement volumetry immediately after partial liver resection served as the gold standard. The resected part was examined with a CT scan after displacement volumetry. Volumetry of the resected liver scan showed excellent correlation to water displacement volumetry (manual: ρ = 0.997; semiautomated software: ρ = 0.995). The difference between the predicted volume and the real volume was significantly smaller with the semiautomated software than with the manual method (33% vs. 57%, p = 0.002). The semiautomated software was almost four times faster for volumetry of the whole liver (manual: 6:59 ± 3:04 min; semiautomated: 1:47 ± 1:11 min). Both methods for liver volumetry give an estimated liver volume close to the real one. The tested semiautomated software is faster, more accurate in predicting the volume of the resected liver part, gives more reproducible results and is less dependent on the user's experience. Both tested types of software allow exact volumetry of resected liver parts. Preoperative prediction can be performed more accurately with the semiautomated software. The semiautomated software is nearly four times faster than the

  8. A Validation Study of the Rank-Preserving Structural Failure Time Model: Confidence Intervals and Unique, Multiple, and Erroneous Solutions.

    Science.gov (United States)

    Ouwens, Mario; Hauch, Ole; Franzén, Stefan

    2018-05-01

    The rank-preserving structural failure time model (RPSFTM) is used for health technology assessment submissions to adjust for switching patients from reference to investigational treatment in cancer trials. It uses counterfactual survival (survival when only reference treatment would have been used) and assumes that, at randomization, the counterfactual survival distribution for the investigational and reference arms is identical. Previous validation reports have assumed that patients in the investigational treatment arm stay on therapy throughout the study period. To evaluate the validity of the RPSFTM at various levels of crossover in situations in which patients are taken off the investigational drug in the investigational arm. The RPSFTM was applied to simulated datasets differing in percentage of patients switching, time of switching, underlying acceleration factor, and number of patients, using exponential distributions for the time on investigational and reference treatment. There were multiple scenarios in which two solutions were found: one corresponding to identical counterfactual distributions, and the other to two different crossing counterfactual distributions. The same was found for the hazard ratio (HR). Unique solutions were observed only when switching patients were on investigational treatment for <40% of the time that patients in the investigational arm were on treatment. Distributions other than exponential could have been used for time on treatment. An HR equal to 1 is a necessary but not always sufficient condition to indicate acceleration factors associated with equal counterfactual survival. Further assessment to distinguish crossing counterfactual curves from equal counterfactual curves is especially needed when the time that switchers stay on investigational treatment is relatively long compared to the time direct starters stay on investigational treatment.

  9. Validating new software for semiautomated liver volumetry. Better than manual measurement?

    Energy Technology Data Exchange (ETDEWEB)

    Noschinski, L.E.; Maiwald, B.; Voigt, P.; Kahn, T.; Stumpp, P. [University Hospital Leipzig (Germany). Dept. of Diagnostic and Interventional Radiology; Wiltberger, G. [University Hospital Leipzig (Germany). Dept. of Visceral, Transplantation, Thoracic and Vascular Surgery

    2015-09-15

    This prospective study compared a manual program for liver volumetry with semiautomated software. The hypothesis was that the semiautomated software would be faster, more accurate and less dependent on the evaluator's experience. Ten patients undergoing hemihepatectomy were included in this IRB approved study after written informed consent. All patients underwent a preoperative abdominal 3-phase CT scan, which was used for whole liver volumetry and volume prediction for the liver part to be resected. Two different types of software were used: 1) manual method: borders of the liver had to be defined per slice by the user; 2) semiautomated software: automatic identification of liver volume with manual assistance for definition of Couinaud segments. Measurements were done by six observers with different experience levels. Water displacement volumetry immediately after partial liver resection served as the gold standard. The resected part was examined with a CT scan after displacement volumetry. Volumetry of the resected liver scan showed excellent correlation to water displacement volumetry (manual: ρ = 0.997; semiautomated software: ρ = 0.995). The difference between the predicted volume and the real volume was significantly smaller with the semiautomated software than with the manual method (33 % vs. 57 %, p = 0.002). The semiautomated software was almost four times faster for volumetry of the whole liver (manual: 6:59 ± 3:04min; semiautomated: 1:47 ± 1:11 min). Both methods for liver volumetry give an estimated liver volume close to the real one. The tested semiautomated software is faster, more accurate in predicting the volume of the resected liver part, gives more reproducible results and is less dependent on the user's experience.

  10. Validating new software for semiautomated liver volumetry. Better than manual measurement?

    International Nuclear Information System (INIS)

    Noschinski, L.E.; Maiwald, B.; Voigt, P.; Kahn, T.; Stumpp, P.; Wiltberger, G.

    2015-01-01

    This prospective study compared a manual program for liver volumetry with semiautomated software. The hypothesis was that the semiautomated software would be faster, more accurate and less dependent on the evaluator's experience. Ten patients undergoing hemihepatectomy were included in this IRB approved study after written informed consent. All patients underwent a preoperative abdominal 3-phase CT scan, which was used for whole liver volumetry and volume prediction for the liver part to be resected. Two different types of software were used: 1) manual method: borders of the liver had to be defined per slice by the user; 2) semiautomated software: automatic identification of liver volume with manual assistance for definition of Couinaud segments. Measurements were done by six observers with different experience levels. Water displacement volumetry immediately after partial liver resection served as the gold standard. The resected part was examined with a CT scan after displacement volumetry. Volumetry of the resected liver scan showed excellent correlation to water displacement volumetry (manual: ρ = 0.997; semiautomated software: ρ = 0.995). The difference between the predicted volume and the real volume was significantly smaller with the semiautomated software than with the manual method (33 % vs. 57 %, p = 0.002). The semiautomated software was almost four times faster for volumetry of the whole liver (manual: 6:59 ± 3:04min; semiautomated: 1:47 ± 1:11 min). Both methods for liver volumetry give an estimated liver volume close to the real one. The tested semiautomated software is faster, more accurate in predicting the volume of the resected liver part, gives more reproducible results and is less dependent on the user's experience.

  11. Validation of the Italian Version of the Dizziness Handicap Inventory, the Situational Vertigo Questionnaire, and the Activity-Specific Balance Confidence Scale for Peripheral and Central Vestibular Symptoms

    Directory of Open Access Journals (Sweden)

    Silvia Colnaghi

    2017-10-01

    Full Text Available Neurophysiological measurements of the vestibular function for diagnosis and follow-up evaluations provide an objective assessment, which, unfortunately, does not necessarily correlate with the patients’ self-feeling. The literature provides many questionnaires to assess the outcome of rehabilitation programs for disequilibrium, but only for the Dizziness Handicap Inventory (DHI is an Italian translation available, validated on a small group of patients suffering from a peripheral acute vertigo. We translated and validated the reliability and validity of the DHI, the Situational Vertigo Questionnaire (SVQ, and the Activities-Specific Balance Confidence Scale (ABC in 316 Italian patients complaining of dizziness due either to a peripheral or to a central vestibular deficit, or in whom vestibular signs were undetectable by means of instrumental testing or clinical evaluation. Cronbach’s coefficient alpha, the homogeneity index, and test–retest reproducibility, confirmed reliability of the Italian version of the three questionnaires. Validity was confirmed by correlation test between questionnaire scores. Correlations with clinical variables suggested that they can be used as a complementary tool for the assessment of vestibular symptoms. In conclusion, the Italian versions of DHI, SVQ, and ABC are reliable and valid questionnaires for assessing the impact of dizziness on the quality of life of Italian patients with peripheral or central vestibular deficit.

  12. Development, validity and reliability testing of the East Midlands Evaluation Tool (EMET) for measuring impacts on trainees' confidence and competence following end of life care training.

    Science.gov (United States)

    Whittaker, B; Parry, R; Bird, L; Watson, S; Faull, C

    2017-02-02

    To develop, test and validate a versatile questionnaire, the East Midlands Evaluation Tool (EMET), for measuring effects of end of life care training events on trainees' self-reported confidence and competence. A paper-based questionnaire was designed on the basis of the English Department of Health's core competences for end of life care, with sections for completion pretraining, immediately post-training and also for longer term follow-up. Preliminary versions were field tested at 55 training events delivered by 13 organisations to 1793 trainees working in diverse health and social care backgrounds. Iterative rounds of development aimed to maximise relevance to events and trainees. Internal consistency was assessed by calculating interitem correlations on questionnaire responses during field testing. Content validity was assessed via qualitative content analysis of (1) responses to questionnaires completed by field tester trainers and (2) field notes from a workshop with a separate cohort of experienced trainers. Test-retest reliability was assessed via repeat administration to a cohort of student nurses. The EMET comprises 27 items with Likert-scaled responses supplemented with questions seeking free-text responses. It measures changes in self-assessed confidence and competence on 5 subscales: communication skills; assessment and care planning; symptom management; advance care planning; overarching values and knowledge. Test-retest reliability was found to be good, as was internal consistency: the questions successfully assess different aspects of the same underlying concept. The EMET provides a time-efficient, reliable and flexible means of evaluating effects of training on self-reported confidence and competence in the key elements of end of life care. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  13. Reliability and validity of the German short version of the Activities specific Balance Confidence (ABC-D6) scale in older adults.

    Science.gov (United States)

    Schott, Nadja

    2014-01-01

    The Activities specific Balance Confidence (ABC) is a questionnaire which was developed to assess falls-associated self-efficacy. The aim of this study was to evaluate reliability and validity of the German abbreviated 6-item version of the ABC scores in community-dwelling older people. The study sample included 384 subjects (age 71.1 ± 9.7). In order to determine the psychometric properties, reliability and validity were assessed through administration of the German adaptation of the ABC-D16 to participants twice, 10 days apart, and comparison of the ABC-D16 and the ABC-D6 with functional measures of balance and mobility (one-leg stance; 10 m walk; TUG; Fullerton Advanced Balance Scale (FAB)), physical activity (Physical Activity Scale for the Elderly (PASE)), physical fitness (30s arm curl, 30s chair stand, 6 min walk), cognition (Trail-Making-Test (TMT)), falls status, and quality of life (SF36). Factor analyses suggested a 1-factor solution for the ABC-D6 scale (explained variance 79.8%). Internal consistency (.95) and test-retest reliability (.98) for the ABC-D6 scores were excellent. Scores on the ABC-D6 were significantly lower than on the ABC-D16, but ABC-D16 and ABC-D6 scores were highly correlated (.94). There was an increasing difference in the ABC-scores between men and women with increasing age. Fallers reported lower balance confidence than non-fallers. The ABC-D6 score significantly correlated with functional measures of balance and mobility, physical activity, physical fitness, cognition, and quality of life (-.698valid instrument to asses falls-associated self-efficacy and may be used in future research projects and clinical trials. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  14. Using the confidence interval confidently.

    Science.gov (United States)

    Hazra, Avijit

    2017-10-01

    Biomedical research is seldom done with entire populations but rather with samples drawn from a population. Although we work with samples, our goal is to describe and draw inferences regarding the underlying population. It is possible to use a sample statistic and estimates of error in the sample to get a fair idea of the population parameter, not as a single value, but as a range of values. This range is the confidence interval (CI) which is estimated on the basis of a desired confidence level. Calculation of the CI of a sample statistic takes the general form: CI = Point estimate ± Margin of error, where the margin of error is given by the product of a critical value (z) derived from the standard normal curve and the standard error of point estimate. Calculation of the standard error varies depending on whether the sample statistic of interest is a mean, proportion, odds ratio (OR), and so on. The factors affecting the width of the CI include the desired confidence level, the sample size and the variability in the sample. Although the 95% CI is most often used in biomedical research, a CI can be calculated for any level of confidence. A 99% CI will be wider than 95% CI for the same sample. Conflict between clinical importance and statistical significance is an important issue in biomedical research. Clinical importance is best inferred by looking at the effect size, that is how much is the actual change or difference. However, statistical significance in terms of P only suggests whether there is any difference in probability terms. Use of the CI supplements the P value by providing an estimate of actual clinical effect. Of late, clinical trials are being designed specifically as superiority, non-inferiority or equivalence studies. The conclusions from these alternative trial designs are based on CI values rather than the P value from intergroup comparison.

  15. Astronaut training manual

    Science.gov (United States)

    Coleman, E. A.

    1980-01-01

    Scientific information from previous space flights, space medicine, exercise physiology, and sports medicine was used to prepare a physical fitness manual suitable for use by members of the NASA astronaut population. A variety of scientifically valid exercise programs and activities suitable for the development of physical fitness are provided. Programs, activities, and supportive scientific data are presented in a concise, easy to read format so as to permit the user to select his or her mode of training with confidence and devote time previously spent experimenting with training routines to preparation for space flight. The programs and activities included were tested and shown to be effective and enjoyable.

  16. Guidelines for the verification and validation of expert system software and conventional software: User`s manual. Volume 7

    Energy Technology Data Exchange (ETDEWEB)

    Mirsky, S.M.; Hayes, J.E.; Miller, L.A. [Science Applications International Corp., McLean, VA (United States)

    1995-03-01

    This report provides a step-by-step guide, or user manual, for personnel responsible for the planning and execution of the verification and validation (V&V), and developmental testing, of expert systems, conventional software systems, and various other types of artificial intelligence systems. While the guide was developed primarily for applications in the utility industry, it applies well to all industries. The user manual has three sections. In Section 1 the user assesses the stringency of V&V needed for the system under consideration, identifies the development stage the system is in, and identifies the component(s) of the system to be tested next. These three pieces of information determine which Guideline Package of V&V methods is most appropriate for those conditions. The V&V Guideline Packages are provided in Section 2. Each package consists of an ordered set of V&V techniques to be applied to the system, guides on choosing the review/evaluation team, measurement criteria, and references to a book or report which describes the application of the method. Section 3 presents details of 11 of the most important (or least well-explained in the literature) methods to assist the user in applying these techniques accurately.

  17. Guidelines for the verification and validation of expert system software and conventional software: User's manual. Volume 7

    International Nuclear Information System (INIS)

    Mirsky, S.M.; Hayes, J.E.; Miller, L.A.

    1995-03-01

    This report provides a step-by-step guide, or user manual, for personnel responsible for the planning and execution of the verification and validation (V ampersand V), and developmental testing, of expert systems, conventional software systems, and various other types of artificial intelligence systems. While the guide was developed primarily for applications in the utility industry, it applies well to all industries. The user manual has three sections. In Section 1 the user assesses the stringency of V ampersand V needed for the system under consideration, identifies the development stage the system is in, and identifies the component(s) of the system to be tested next. These three pieces of information determine which Guideline Package of V ampersand V methods is most appropriate for those conditions. The V ampersand V Guideline Packages are provided in Section 2. Each package consists of an ordered set of V ampersand V techniques to be applied to the system, guides on choosing the review/evaluation team, measurement criteria, and references to a book or report which describes the application of the method. Section 3 presents details of 11 of the most important (or least well-explained in the literature) methods to assist the user in applying these techniques accurately

  18. Validity of Alcohol Use Disorder Identification Test-Korean Revised Version for Screening Alcohol Use Disorder according to Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition Criteria.

    Science.gov (United States)

    Chang, Jung Wei; Kim, Jong Sung; Jung, Jin Gyu; Kim, Sung Soo; Yoon, Seok Joon; Jang, Hak Sun

    2016-11-01

    The Alcohol Use Disorder Identification Test (AUDIT) has been widely used to identify alcohol use disorder (AUD). This study evaluated the validity of the AUDIT-Korean revised version (AUDIT-KR) for screening AUD according to Diagnostic and Statistical Manual of Mental Disorders, fifth edition (DSM-5) criteria. This research was conducted with 443 subjects who visited the Chungnam National University Hospital for a comprehensive medical examination. All subjects completed the demographic questionnaire and AUDIT-KR without assistance. Subjects were divided into two groups according to DSM-5 criteria: an AUD group, which included patients that fit the criteria for AUD (120 males and 21 females), and a non-AUD group, which included 146 males and 156 females that did not meet AUD criteria. The appropriate cut-off values, sensitivity, specificity, and positive and negative predictive values of the AUDIT-KR were evaluated. The mean±standard deviation AUDIT-KR scores were 10.32±7.48 points in males and 3.23±4.42 points in females. The area under the receiver operating characteristic curve (95% confidence interval, CI) of the AUDIT-KR for identifying AUD was 0.884 (0.840-0.920) in males and 0.962 (0.923-0.985) in females. The optimal cut-off value of the AUDIT-KR was 10 points for males (sensitivity, 81.90%; specificity, 81.33%; positive predictive value, 77.2%; negative predictive value, 85.3%) and 5 points for females (sensitivity, 100.00%; specificity, 88.54%; positive predictive value, 52.6%; negative predictive value, 100.0%). The AUDIT-KR has high reliability and validity for identifying AUD according to DSM-5 criteria.

  19. Is the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, histrionic personality disorder category a valid construct?

    Science.gov (United States)

    Bakkevig, Jonas F; Karterud, Sigmund

    2010-01-01

    The study investigated crucial aspects of the construct validity of the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV) histrionic personality disorder (HPD) category. The study included 2289 patients from the Norwegian Network of Psychotherapeutic Day Hospitals. Construct validity was assessed by means of prevalence, comorbidity with other personality disorders, internal consistency among HPD criteria, severity indices, as well as factor analyses. The prevalence of HPD was very low (0.4 %). The comorbidity was high, especially with borderline, narcissistic, and dependent personality disorders. The internal consistency was low. The criteria seemed to form 2 separate clusters: the first contained exhibitionistic and attention-seeking traits and the other contained impressionistic traits. The results indicated poor construct validity of the HPD category. Different options for the future of the category are discussed. The authors suggest the HPD category to be deleted from the DSM system. However, the clinical phenomena of exhibitionism and attention-seeking, which are the dominant personality features of HPD, should be preserved in an exhibitionistic subtype of narcissism. Copyright 2010 Elsevier Inc. All rights reserved.

  20. Comparison between manual and automated analysis for the quantification of carotid wall by using sonography. A validation study with CT

    International Nuclear Information System (INIS)

    Saba, Luca; Montisci, Roberto; Molinari, Filippo; Tallapally, Niranjan; Zeng, Guang; Mallarini, Giorgio; Suri, Jasjit S.

    2012-01-01

    Purpose: The purpose of this paper was to compare manual and automated analysis for the quantification of carotid wall obtained with sonography by using the computed tomography as validation technique. Material and methods: 21 consecutive patients underwent MDCTA and ultrasound analysis of carotid arteries (mean age 68 years; age range 59–81 years). The intima–media-thickness (IMT) of the 42 carotids was measured with novel and dedicated automated software analysis (called AtheroEdge™, Biomedical Technologies, Denver, CO, USA) and by four observers that manually calculated the IMT. The carotid artery wall thickness (CAWT) was also quantified in the CT datasets. Bland–Altman statistics was employed to measure the agreement between methods. A Student's t-test was used to test the differences between the IMT values of AtheroEdge™. The study obtained the IRB approval. Results: The correlation between automated AtheroEdge™ measurements and those of the human experts were equal to 95.5%, 73.5%, 88.9%, and 81.7%. The IMT coefficient of variation of the human experts was equal to 11.9%. By using a Student's t-test, the differences between the IMT values of AtheroEdge™ and those of the human experts were not found statistically significant (p value = 0.02). On comparing AtheroEdge™ (using Ultrasound) with CAWT (using CT), the results suggested a very good concordance of 84.96%. Conclusions: Data of this preliminary study indicate that automated software AtheroEdge™ can analyze with precision the IMT of carotid arteries and that the concordance with CT is optimal.

  1. Validation of hippocampal volumes measured using a manual method and two automated methods (FreeSurfer and IBASPM) in chronic major depressive disorder

    Energy Technology Data Exchange (ETDEWEB)

    Tae, Woo Suk; Lee, Kang Uk; Nam, Eui-Cheol; Kim, Keun Woo [Kangwon National University College of Medicine, Neuroscience Research Institute, Kangwon (Korea); Kim, Sam Soo [Kangwon National University College of Medicine, Neuroscience Research Institute, Kangwon (Korea); Kangwon National University Hospital, Department of Radiology, Kangwon-do (Korea)

    2008-07-15

    To validate the usefulness of the packages available for automated hippocampal volumetry, we measured hippocampal volumes using one manual and two recently developed automated volumetric methods. The study included T1-weighted magnetic resonance imaging (MRI) of 21 patients with chronic major depressive disorder (MDD) and 20 normal controls. Using coronal turbo field echo (TFE) MRI with a slice thickness of 1.3 mm, the hippocampal volumes were measured using three methods: manual volumetry, surface-based parcellation using FreeSurfer, and individual atlas-based volumetry using IBASPM. In addition, the intracranial cavity volume (ICV) was measured manually. The absolute left hippocampal volume of the patients with MDD measured using all three methods was significantly smaller than the left hippocampal volume of the normal controls (manual P=0.029, FreeSurfer P=0.035, IBASPM P=0.018). After controlling for the ICV, except for the right hippocampal volume measured using FreeSurfer, both measured hippocampal volumes of the patients with MDD were significantly smaller than the measured hippocampal volumes of the normal controls (right manual P=0.019, IBASPM P=0.012; left manual P=0.003, FreeSurfer P=0.010, IBASPM P=0.002). In the intrarater reliability test, the intraclass correlation coefficients (ICCs) were all excellent (manual right 0.947, left 0.934; FreeSurfer right 1.000, left 1.000; IBASPM right 1.000, left 1.000). In the test of agreement between the volumetric methods, the ICCs were right 0.846 and left 0.848 (manual and FreeSurfer), and right 0.654 and left 0.717 (manual and IBASPM). The automated hippocampal volumetric methods showed good agreement with manual hippocampal volumetry, but the volume measured using FreeSurfer was 35% larger and the agreement was questionable with IBASPM. Although the automated methods could detect hippocampal atrophy in the patients with MDD, the results indicate that manual hippocampal volumetry is still the gold standard

  2. Validation of hippocampal volumes measured using a manual method and two automated methods (FreeSurfer and IBASPM) in chronic major depressive disorder

    International Nuclear Information System (INIS)

    Tae, Woo Suk; Lee, Kang Uk; Nam, Eui-Cheol; Kim, Keun Woo; Kim, Sam Soo

    2008-01-01

    To validate the usefulness of the packages available for automated hippocampal volumetry, we measured hippocampal volumes using one manual and two recently developed automated volumetric methods. The study included T1-weighted magnetic resonance imaging (MRI) of 21 patients with chronic major depressive disorder (MDD) and 20 normal controls. Using coronal turbo field echo (TFE) MRI with a slice thickness of 1.3 mm, the hippocampal volumes were measured using three methods: manual volumetry, surface-based parcellation using FreeSurfer, and individual atlas-based volumetry using IBASPM. In addition, the intracranial cavity volume (ICV) was measured manually. The absolute left hippocampal volume of the patients with MDD measured using all three methods was significantly smaller than the left hippocampal volume of the normal controls (manual P=0.029, FreeSurfer P=0.035, IBASPM P=0.018). After controlling for the ICV, except for the right hippocampal volume measured using FreeSurfer, both measured hippocampal volumes of the patients with MDD were significantly smaller than the measured hippocampal volumes of the normal controls (right manual P=0.019, IBASPM P=0.012; left manual P=0.003, FreeSurfer P=0.010, IBASPM P=0.002). In the intrarater reliability test, the intraclass correlation coefficients (ICCs) were all excellent (manual right 0.947, left 0.934; FreeSurfer right 1.000, left 1.000; IBASPM right 1.000, left 1.000). In the test of agreement between the volumetric methods, the ICCs were right 0.846 and left 0.848 (manual and FreeSurfer), and right 0.654 and left 0.717 (manual and IBASPM). The automated hippocampal volumetric methods showed good agreement with manual hippocampal volumetry, but the volume measured using FreeSurfer was 35% larger and the agreement was questionable with IBASPM. Although the automated methods could detect hippocampal atrophy in the patients with MDD, the results indicate that manual hippocampal volumetry is still the gold standard

  3. Manual versus automated coding of free-text self-reported medication data in the 45 and Up Study: a validation study.

    Science.gov (United States)

    Gnjidic, Danijela; Pearson, Sallie-Anne; Hilmer, Sarah N; Basilakis, Jim; Schaffer, Andrea L; Blyth, Fiona M; Banks, Emily

    2015-03-30

    Increasingly, automated methods are being used to code free-text medication data, but evidence on the validity of these methods is limited. To examine the accuracy of automated coding of previously keyed in free-text medication data compared with manual coding of original handwritten free-text responses (the 'gold standard'). A random sample of 500 participants (475 with and 25 without medication data in the free-text box) enrolled in the 45 and Up Study was selected. Manual coding involved medication experts keying in free-text responses and coding using Anatomical Therapeutic Chemical (ATC) codes (i.e. chemical substance 7-digit level; chemical subgroup 5-digit; pharmacological subgroup 4-digit; therapeutic subgroup 3-digit). Using keyed-in free-text responses entered by non-experts, the automated approach coded entries using the Australian Medicines Terminology database and assigned corresponding ATC codes. Based on manual coding, 1377 free-text entries were recorded and, of these, 1282 medications were coded to ATCs manually. The sensitivity of automated coding compared with manual coding was 79% (n = 1014) for entries coded at the exact ATC level, and 81.6% (n = 1046), 83.0% (n = 1064) and 83.8% (n = 1074) at the 5, 4 and 3-digit ATC levels, respectively. The sensitivity of automated coding for blank responses was 100% compared with manual coding. Sensitivity of automated coding was highest for prescription medications and lowest for vitamins and supplements, compared with the manual approach. Positive predictive values for automated coding were above 95% for 34 of the 38 individual prescription medications examined. Automated coding for free-text prescription medication data shows very high to excellent sensitivity and positive predictive values, indicating that automated methods can potentially be useful for large-scale, medication-related research.

  4. Targeting Low Career Confidence Using the Career Planning Confidence Scale

    Science.gov (United States)

    McAuliffe, Garrett; Jurgens, Jill C.; Pickering, Worth; Calliotte, James; Macera, Anthony; Zerwas, Steven

    2006-01-01

    The authors describe the development and validation of a test of career planning confidence that makes possible the targeting of specific problem issues in employment counseling. The scale, developed using a rational process and the authors' experience with clients, was tested for criterion-related validity against 2 other measures. The scale…

  5. Validating the proposed diagnostic and statistical manual of mental disorders, 5th edition, severity indicator for personality disorder.

    Science.gov (United States)

    Morey, Leslie C; Bender, Donna S; Skodol, Andrew E

    2013-09-01

    The authors sought to determine whether a 5-point global rating of personality dysfunction on the Level of Personality Functioning Scale proposed as a severity index for Diagnostic and Statistical Manual of Mental Disorders, 5th Edition (DSM-5), would be related to DSM-IV personality disorder diagnosis as well as to other key clinical judgments. Data were collected from a national sample of 337 mental health clinicians who provided complete diagnostic information relevant to DSM-IV and proposed DSM-5 personality disorder diagnoses, as well as demographic information and other clinical judgments, on one of their patients. Of the 337 patients described, 248 met criteria for 1 of the 10 specific DSM-IV personality disorders. A "moderate" or greater rating of impairment in personality functioning on the Level Scale demonstrated 84.6% sensitivity and 72.7% specificity for identifying patients meeting criteria for a specific DSM-IV personality disorder. The Level of Personality Functioning Scale had significant and substantial validity correlations with other measures of personality pathology and with clinical judgments regarding functioning, risk, prognosis, and optimal treatment intensity. Furthermore, the single-item Level of Personality Functioning rating was viewed as being as clinically useful as the 10 DSM-IV categories for treatment planning and patient description and was a better predictor of clinician ratings of broad psychosocial functioning than were the 10 DSM-IV categories combined. These results confirm hypotheses that the single-item Level of Personality Functioning Scale rating provides an indication of severity of personality pathology that predicts both assignment of personality disorder diagnosis and clinician appraisals of functioning, risk, prognosis, and needed treatment intensity.

  6. Development and validation of a food photography manual, as a tool for estimation of food portion size in epidemiological dietary surveys in Tunisia

    Directory of Open Access Journals (Sweden)

    Mongia Bouchoucha

    2016-08-01

    Full Text Available Background: Estimation of food portion sizes has always been a challenge in dietary studies on free-living individuals. The aim of this work was to develop and validate a food photography manual to improve the accuracy of the estimated size of consumed food portions. Methods: A manual was compiled from digital photos of foods commonly consumed by the Tunisian population. The food was cooked and weighed before taking digital photographs of three portion sizes. The manual was validated by comparing the method of 24-hour recall (using photos to the reference method [food weighing (FW]. In both the methods, the comparison focused on food intake amounts as well as nutritional issues. Validity was assessed by Bland–Altman limits of agreement. In total, 31 male and female volunteers aged 9–89 participated in the study. Results: We focused on eight food categories and compared their estimated amounts (using the 24-hour recall method to those actually consumed (using FW. Animal products and sweets were underestimated, whereas pasta, bread, vegetables, fruits, and dairy products were overestimated. However, the difference between the two methods is not statistically significant except for pasta (p<0.05 and dairy products (p<0.05. The coefficient of correlation between the two methods is highly significant, ranging from 0.876 for pasta to 0.989 for dairy products. Nutrient intake calculated for both methods showed insignificant differences except for fat (p<0.001 and dietary fiber (p<0.05. A highly significant correlation was observed between the two methods for all micronutrients. The test agreement highlights the lack of difference between the two methods. Conclusion: The difference between the 24-hour recall method using digital photos and the weighing method is acceptable. Our findings indicate that the food photography manual can be a useful tool for quantifying food portion sizes in epidemiological dietary surveys.

  7. Development and validation of a food photography manual, as a tool for estimation of food portion size in epidemiological dietary surveys in Tunisia.

    Science.gov (United States)

    Bouchoucha, Mongia; Akrout, Mouna; Bellali, Hédia; Bouchoucha, Rim; Tarhouni, Fadwa; Mansour, Abderraouf Ben; Zouari, Béchir

    2016-01-01

    Estimation of food portion sizes has always been a challenge in dietary studies on free-living individuals. The aim of this work was to develop and validate a food photography manual to improve the accuracy of the estimated size of consumed food portions. A manual was compiled from digital photos of foods commonly consumed by the Tunisian population. The food was cooked and weighed before taking digital photographs of three portion sizes. The manual was validated by comparing the method of 24-hour recall (using photos) to the reference method [food weighing (FW)]. In both the methods, the comparison focused on food intake amounts as well as nutritional issues. Validity was assessed by Bland-Altman limits of agreement. In total, 31 male and female volunteers aged 9-89 participated in the study. We focused on eight food categories and compared their estimated amounts (using the 24-hour recall method) to those actually consumed (using FW). Animal products and sweets were underestimated, whereas pasta, bread, vegetables, fruits, and dairy products were overestimated. However, the difference between the two methods is not statistically significant except for pasta (p<0.05) and dairy products (p<0.05). The coefficient of correlation between the two methods is highly significant, ranging from 0.876 for pasta to 0.989 for dairy products. Nutrient intake calculated for both methods showed insignificant differences except for fat (p<0.001) and dietary fiber (p<0.05). A highly significant correlation was observed between the two methods for all micronutrients. The test agreement highlights the lack of difference between the two methods. The difference between the 24-hour recall method using digital photos and the weighing method is acceptable. Our findings indicate that the food photography manual can be a useful tool for quantifying food portion sizes in epidemiological dietary surveys.

  8. Validity aspects of the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, narcissistic personality disorder construct.

    Science.gov (United States)

    Karterud, Sigmund; Øien, Maria; Pedersen, Geir

    2011-01-01

    The Diagnostic and Statistical Manual of Mental Disorders (DSM), Fourth Edition, narcissistic personality disorder (NPD) construct has been criticized for being too narrowly defined, for example, by focusing on overt grandiosity at the expense of exhibitionism and narcissistic vulnerability and thus covering only parts of the domain of narcissism. The purpose of this study was to elucidate several validity aspects of the NPD construct. The material consisted of data from 2277 patients (80% of whom had a personality disorder [PD]) who were admitted to units connected to The Norwegian Network of Psychotherapeutic Day Hospitals. The Axis II diagnoses were assessed by Structured Clinical Interview for DSM, Fourth Edition, Axis II Personality Disorders. The frequency of NPD was very low (0.8%). Male patients were overrepresented both on a diagnostic level and on criteria levels. The NPD category was positively associated with other cluster B disorders and negatively associated with avoidant PD. The criteria "demands excessive admiration" and "fantasies of unlimited success" correlated almost as highly with the histrionic PD category and loaded primarily on a histrionic factor. The dominant NPD factor also included the antisocial criterion of "showing no regret having injured others." The major part of the patients' personality pathology could be attributed to other PD criteria. The results challenge the notion of NPD as a distinct diagnostic category. Rather, narcissism should be conceived as personality dimensions pertinent to the whole range of PDs. The results support the views put forward by Russ et al (Refining the construct of narcissistic personality disorder: diagnostic criteria and subtypes. Am J Psychiatry 2008;11:1473-1481) that what clinicians conceive as narcissism consists of several subtypes (dimensions). Our data support the existence of a grandiose/malignant type and an exhibitionistic type. Unfortunately, there was no measure of hypersensitivity. The

  9. The Grimsel radionuclide migration experiment - a contribution to raising confidence in the validity of solute transport models used in performance assessment

    International Nuclear Information System (INIS)

    Frick, U.

    1995-01-01

    The safety assessment of radioactive waste repositories is to provide confidence that the predictive models utilized are applicable for the specific repository systems. Nagra has carried out radionuclide migration experiments at the Grimsel underground test site (Switzerland) for testing of currently used methodologies, data bases, conceptual approaches and codes for modeling radionuclide transport through fractured host rocks. Specific objectives included: identification of the relevant transport processes, to test the extrapolation of laboratory sorption data to field conditions, and to demonstrate the applicability of currently used methodology for conceptualizing or building realistic transport models. Field tests and transport modeling work are complemented by an extensive laboratory program. The field experimental activities focused predominantly on establishing appropriate conditions for identifying relevant transport mechanisms on the scale of a few meters, aiming at full recovery of injected tracers, simple geometry and long-term stability of induced dipole flow fields. A relatively simple homogeneous, dual-porosity advection/diffusion model was built with input from a state of the art petrographic characterisation of the water conducting feature. It was possible to calibrate the model from conservative tracer breakthrough curves. (J.S.). 21 refs., 14 figs., 4 tabs

  10. Reliability and cross-cultural validation of the Turkish version of Manual Ability Classification System (MACS) for children with cerebral palsy.

    Science.gov (United States)

    Akpinar, Pinar; Tezel, Canan G; Eliasson, Ann-Christin; Icagasioglu, Afitap

    2010-01-01

    To determine the reliability and cross-cultural validation of the Turkish translation of the Manual Ability Classification System (MACS) for children with cerebral palsy (CP) and to investigate the relation to gross motor function and other comorbidities. After the forward and backward translation procedures, inter-rater and test-retest reliability was assessed between parents, physiotherapists and physicians using the intra-class correlation coefficient (ICC). Children (N = 118, 4 to 18 years, mean age 9 years 4 months; 68 boys, 50 girls) with various types of CP were classified. Additional data on the Gross Motor Function Classification System (GMFCS), intellectual delay, visual acuity, and epilepsy were collected. The inter-rater reliability was high; the ICC ranged from 0.89 to 0.96 among different professionals and parents. Between two persons of the same profession it ranged from 0.97 to 0.98. For the test-retest reliability it ranged from 0.91 to 0.98. Total agreement between the GMFCS and the MACS occurred in only 45% of the children. The level of the MACS was found to correlate with the accompanying comorbidities, namely intellectual delay and epilepsy. The Turkish version of the MACS is found to be valid and reliable, and is suggested to be appropriate for the assessment of manual ability within the Turkish population.

  11. Confidant Relations in Italy

    Directory of Open Access Journals (Sweden)

    Jenny Isaacs

    2015-02-01

    Full Text Available Confidants are often described as the individuals with whom we choose to disclose personal, intimate matters. The presence of a confidant is associated with both mental and physical health benefits. In this study, 135 Italian adults responded to a structured questionnaire that asked if they had a confidant, and if so, to describe various features of the relationship. The vast majority of participants (91% reported the presence of a confidant and regarded this relationship as personally important, high in mutuality and trust, and involving minimal lying. Confidants were significantly more likely to be of the opposite sex. Participants overall were significantly more likely to choose a spouse or other family member as their confidant, rather than someone outside of the family network. Familial confidants were generally seen as closer, and of greater value, than non-familial confidants. These findings are discussed within the context of Italian culture.

  12. EVLncRNAs: a manually curated database for long non-coding RNAs validated by low-throughput experiments

    Science.gov (United States)

    Zhao, Huiying; Yu, Jiafeng; Guo, Chengang; Dou, Xianghua; Song, Feng; Hu, Guodong; Cao, Zanxia; Qu, Yuanxu

    2018-01-01

    Abstract Long non-coding RNAs (lncRNAs) play important functional roles in various biological processes. Early databases were utilized to deposit all lncRNA candidates produced by high-throughput experimental and/or computational techniques to facilitate classification, assessment and validation. As more lncRNAs are validated by low-throughput experiments, several databases were established for experimentally validated lncRNAs. However, these databases are small in scale (with a few hundreds of lncRNAs only) and specific in their focuses (plants, diseases or interactions). Thus, it is highly desirable to have a comprehensive dataset for experimentally validated lncRNAs as a central repository for all of their structures, functions and phenotypes. Here, we established EVLncRNAs by curating lncRNAs validated by low-throughput experiments (up to 1 May 2016) and integrating specific databases (lncRNAdb, LncRANDisease, Lnc2Cancer and PLNIncRBase) with additional functional and disease-specific information not covered previously. The current version of EVLncRNAs contains 1543 lncRNAs from 77 species that is 2.9 times larger than the current largest database for experimentally validated lncRNAs. Seventy-four percent lncRNA entries are partially or completely new, comparing to all existing experimentally validated databases. The established database allows users to browse, search and download as well as to submit experimentally validated lncRNAs. The database is available at http://biophy.dzu.edu.cn/EVLncRNAs. PMID:28985416

  13. Raising Confident Kids

    Science.gov (United States)

    ... First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body ... Videos for Educators Search English Español Raising Confident Kids KidsHealth / For Parents / Raising Confident Kids What's in ...

  14. The Investigation of Construct Validity of Diagnostic and Statistical Manual of Mental Disorder-5 Personality Traits on Iranian sample with Antisocial and Borderline Personality Disorders.

    Science.gov (United States)

    Amini, Mehdi; Pourshahbaz, Abbas; Mohammadkhani, Parvaneh; Ardakani, Mohammad-Reza Khodaie; Lotfi, Mozhgan

    2014-12-01

    The goal of this study was to examine the construct validity of the diagnostic and statistical manual of mental disorder-5 (DSM-5) conceptual model of antisocial and borderline personality disorders (PDs). More specifically, the aim was to determine whether the DSM-5 five-factor structure of pathological personality trait domains replicated in an independently collected sample that differs culturally from the derivation sample. This study was on a sample of 346 individuals with antisocial (n = 122) and borderline PD (n = 130), and nonclinical subjects (n = 94). Participants randomly selected from prisoners, out-patient, and in-patient clients. Participants were recruited from Tehran prisoners, and clinical psychology and psychiatry clinics of Razi and Taleghani Hospital, Tehran, Iran. The SCID-II-PQ, SCID-II, DSM-5 Personality Trait Rating Form (Clinician's PTRF) were used to diagnosis of PD and to assessment of pathological traits. The data were analyzed by exploratory factor analysis. Factor analysis revealed a 5-factor solution for DSM-5 personality traits. Results showed that DSM-5 has adequate construct validity in Iranian sample with antisocial and borderline PDs. Factors similar in number with the other studies, but different in the content. Exploratory factor analysis revealed five homogeneous components of antisocial and borderline PDs. That may represent personality, behavioral, and affective features central to the disorder. Furthermore, the present study helps understand the adequacy of DSM-5 dimensional approach to evaluation of personality pathology, specifically on Iranian sample.

  15. The investigation of construct validity of diagnostic and statistical manual of mental disorder-5 personality traits on iranian sample with antisocial and borderline personality disorders

    Directory of Open Access Journals (Sweden)

    Mehdi Amini

    2014-01-01

    Full Text Available Background: The goal of this study was to examine the construct validity of the diagnostic and statistical manual of mental disorder-5 (DSM-5 conceptual model of antisocial and borderline personality disorders (PDs. More specifically, the aim was to determine whether the DSM-5 five-factor structure of pathological personality trait domains replicated in an independently collected sample that differs culturally from the derivation sample. Methods: This study was on a sample of 346 individuals with antisocial (n = 122 and borderline PD (n = 130, and nonclinical subjects (n = 94. Participants randomly selected from prisoners, out-patient, and in-patient clients . Participants were recruited from Tehran prisoners, and clinical psychology and psychiatry clinics of Razi and Taleghani Hospital, Tehran, Iran. The SCID-II-PQ, SCID-II, DSM-5 Personality Trait Rating Form (Clinician′s PTRF were used to diagnosis of PD and to assessment of pathological traits. The data were analyzed by exploratory factor analysis. Results: Factor analysis revealed a 5-factor solution for DSM-5 personality traits. Results showed that DSM-5 has adequate construct validity in Iranian sample with antisocial and borderline PDs. Factors similar in number with the other studies, but different in the content. Conclusions: Exploratory factor analysis revealed five homogeneous components of antisocial and borderline PDs. That may represent personality, behavioral, and affective features central to the disorder. Furthermore, the present study helps understand the adequacy of DSM-5 dimensional approach to evaluation of personality pathology, specifically on Iranian sample.

  16. Guidelines for the verification and validation of expert system software and conventional software. Volume 7, User's manual: Final report

    International Nuclear Information System (INIS)

    Miller, L.A.; Hayes, J.E.; Mirsky, S.M.

    1995-05-01

    Reliable software is required for nuclear power industry applications. Verification and validation techniques applied during the software development process can help eliminate errors that could inhibit the proper operation of digital systems and cause availability and safety problems. Most of the techniques described in this report are valid for conventional software systems as well as for expert systems. The project resulted in a set of 16 V ampersand V guideline packages and 11 sets of procedures based on the class, development phase, and system component being tested. These guideline packages and procedures help a utility define the level of V ampersand V, which involves evaluating the complexity and type of software component along with the consequences of failure. In all, the project identified 153 V ampersand V techniques for conventional software systems and demonstrated their application to all aspects of expert systems except for the knowledge base, which requires specially developed tools. Each of these conventional techniques covers anywhere from 2-52 total types of conventional software defects, and each defect is covered by 21-50 V ampersand V techniques. The project also identified automated tools to Support V ampersand V activities

  17. Development and validation of rear impact computer simulation model of an adult manual transit wheelchair with a seated occupant.

    Science.gov (United States)

    Salipur, Zdravko; Bertocci, Gina

    2010-01-01

    It has been shown that ANSI WC19 transit wheelchairs that are crashworthy in frontal impact exhibit catastrophic failures in rear impact and may not be able to provide stable seating support and thus occupant protection for the wheelchair occupant. Thus far only limited sled test and computer simulation data have been available to study rear impact wheelchair safety. Computer modeling can be used as an economic and comprehensive tool to gain critical knowledge regarding wheelchair integrity and occupant safety. This study describes the development and validation of a computer model simulating an adult wheelchair-seated occupant subjected to a rear impact event. The model was developed in MADYMO and validated rigorously using the results of three similar sled tests conducted to specifications provided in the draft ISO/TC 173 standard. Outcomes from the model can provide critical wheelchair loading information to wheelchair and tiedown manufacturers, resulting in safer wheelchair designs for rear impact conditions. (c) 2009 IPEM. Published by Elsevier Ltd. All rights reserved.

  18. Validity of consumer-grade activity monitor to identify manual wheelchair propulsion in standardized activities of daily living.

    Science.gov (United States)

    Leving, Marika T; Horemans, Henricus L D; Vegter, Riemer J K; de Groot, Sonja; Bussmann, Johannes B J; van der Woude, Lucas H V

    2018-01-01

    Hypoactive lifestyle contributes to the development of secondary complications and lower quality of life in wheelchair users. There is a need for objective and user-friendly physical activity monitors for wheelchair-dependent individuals in order to increase physical activity through self-monitoring, goal setting, and feedback provision. To determine the validity of Activ8 Activity Monitors to 1) distinguish two classes of activities: independent wheelchair propulsion from other non-propulsive wheelchair-related activities 2) distinguish five wheelchair-related classes of activities differing by the movement intensity level: sitting in a wheelchair (hands may be moving but wheelchair remains stationary), maneuvering, and normal, high speed or assisted wheelchair propulsion. Sixteen able-bodied individuals performed sixteen various standardized 60s-activities of daily living. Each participant was equipped with a set of two Activ8 Professional Activity Monitors, one at the right forearm and one at the right wheel. Task classification by the Active8 Monitors was validated using video recordings. For the overall agreement, sensitivity and positive predictive value, outcomes above 90% are considered excellent, between 70 and 90% good, and below 70% unsatisfactory. Division in two classes resulted in overall agreement of 82.1%, sensitivity of 77.7% and positive predictive value of 78.2%. 84.5% of total duration of all tasks was classified identically by Activ8 and based on the video material. Division in five classes resulted in overall agreement of 56.6%, sensitivity of 52.8% and positive predictive value of 51.9%. 59.8% of total duration of all tasks was classified identically by Activ8 and based on the video material. Activ8 system proved to be suitable for distinguishing between active wheelchair propulsion and other non-propulsive wheelchair-related activities. The ability of the current system and algorithms to distinguish five various wheelchair-related activities

  19. The relationship between fundamental movement skill proficiency and physical self-confidence among adolescents.

    Science.gov (United States)

    McGrane, Bronagh; Belton, Sarahjane; Powell, Danielle; Issartel, Johann

    2017-09-01

    This study aims to assess fundamental movement skill (FMS) proficiency, physical self-confidence levels, and the relationship between these variables and gender differences among adolescents. Three hundred and ninety five adolescents aged 13.78 years (SD = ±1.2) from 20 schools were involved in this study. The Test of Gross Motor Development-2nd Edition (TGMD), TGMD-2 and Victorian Skills Manual were used to assess 15 FMS. Participants' physical self-confidence was also assessed using a valid skill-specific scale. A significant correlation was observed between FMS proficiency and physical self-confidence for females only (r = 0.305, P < 0.001). Males rated themselves as having significantly higher physical self-confidence levels than females (P = 0.001). Males scored significantly higher than females in FMS proficiency (P < 0.05), and the lowest physical self-confidence group were significantly less proficient at FMS than the medium (P < 0.001) and high physical self-confidence groups (P < 0.05). This information not only highlights those in need of assistance to develop their FMS but will also facilitate in the development of an intervention which aims to improve physical self-confidence and FMS proficiency.

  20. Understanding Confidence Intervals With Visual Representations

    OpenAIRE

    Navruz, Bilgin; Delen, Erhan

    2014-01-01

    In the present paper, we showed how confidence intervals (CIs) are valuable and useful in research studies when they are used in the correct form with correct interpretations. The sixth edition of the APA (2010) Publication Manual strongly recommended reporting CIs in research studies, and it was described as “the best reporting strategy” (p. 34). Misconceptions and correct interpretations of CIs were presented from several textbooks. In addition, limitations of the null hypothesis statistica...

  1. The Model Confidence Set

    DEFF Research Database (Denmark)

    Hansen, Peter Reinhard; Lunde, Asger; Nason, James M.

    The paper introduces the model confidence set (MCS) and applies it to the selection of models. A MCS is a set of models that is constructed such that it will contain the best model with a given level of confidence. The MCS is in this sense analogous to a confidence interval for a parameter. The MCS......, beyond the comparison of models. We apply the MCS procedure to two empirical problems. First, we revisit the inflation forecasting problem posed by Stock and Watson (1999), and compute the MCS for their set of inflation forecasts. Second, we compare a number of Taylor rule regressions and determine...... the MCS of the best in terms of in-sample likelihood criteria....

  2. Validation of a Cytotechnologist Manual Counting Service for the Ki67 Index in Neuroendocrine Tumors of the Pancreas and Gastrointestinal Tract.

    Science.gov (United States)

    Cottenden, Jennielee; Filter, Emily R; Cottreau, Jon; Moore, David; Bullock, Martin; Huang, Weei-Yuarn; Arnason, Thomas

    2018-03-01

    - Pathologists routinely assess Ki67 immunohistochemistry to grade gastrointestinal and pancreatic neuroendocrine tumors. Unfortunately, manual counts of the Ki67 index are very time consuming and eyeball estimation has been criticized as unreliable. Manual Ki67 counts performed by cytotechnologists could potentially save pathologist time and improve accuracy. - To assess the concordance between manual Ki67 index counts performed by cytotechnologists versus eyeball estimates and manual Ki67 counts by pathologists. - One Ki67 immunohistochemical stain was retrieved from each of 18 archived gastrointestinal or pancreatic neuroendocrine tumor resections. We compared pathologists' Ki67 eyeball estimates on glass slides and printed color images with manual counts performed by 3 cytotechnologists and gold standard manual Ki67 index counts by 3 pathologists. - Tumor grade agreement between pathologist image eyeball estimate and gold standard pathologist manual count was fair (κ = 0.31; 95% CI, 0.030-0.60). In 9 of 20 cases (45%), the mean pathologist eyeball estimate was 1 grade higher than the mean pathologist manual count. There was almost perfect agreement in classifying tumor grade between the mean cytotechnologist manual count and the mean pathologist manual count (κ = 0.910; 95% CI, 0.697-1.00). In 20 cases, there was only 1 grade disagreement between the 2 methods. Eyeball estimation by pathologists required less than 1 minute, whereas manual counts by pathologists required a mean of 17 minutes per case. - Eyeball estimation of the Ki67 index has a high rate of tumor grade misclassification compared with manual counting. Cytotechnologist manual counts are accurate and save pathologist time.

  3. Current Developments in Measuring Academic Behavioural Confidence

    Science.gov (United States)

    Sander, Paul

    2009-01-01

    Using published findings and by further analyses of existing data, the structure, validity and utility of the Academic Behavioural Confidence scale (ABC) is critically considered. Validity is primarily assessed through the scale's relationship with other existing scales as well as by looking for predicted differences. The utility of the ABC scale…

  4. The Validity and Reliability Characteristics of the M-BACK Questionnaire to Assess the Barriers, Attitudes, Confidence, and Knowledge of Mental Health Staff Regarding Metabolic Health of Mental Health Service Users

    Directory of Open Access Journals (Sweden)

    Andrew Watkins

    2017-12-01

    Full Text Available BackgroundAddressing the burden of poor physical health and the subsequent gap in life expectancy experienced by people with mental illness is a major priority in mental health services. To equip mental health staff with the competence to deliver evidence-based interventions, targeted staff training regarding metabolic health is required. In order to evaluate the effectiveness of staff training regarding metabolic health, we aimed to develop a succinct measure to determine the barriers, attitudes, confidence, and knowledge of health practitioners through the development and test–retest reliability of the Metabolic-Barriers, Attitudes, Confidence, and Knowledge Questionnaire (M-BACK.MethodsThe M-BACK questionnaire was developed to evaluate the impact of specialized training in metabolic health care for mental health nurses. Content of the M-BACK was developed from a literature review and refined by an expert review panel and validated via a piloting process. To determine the test–retest reliability of the M-BACK, 31 nursing students recruited from the University of Notre Dame, Sydney completed the questionnaire on two separate occasions, 7 days apart. Intraclass correlation coefficients (ICCs were calculated for the total score, as well as each of the four domains.ResultsPilot testing was undertaken with a sample of 106 mental health nurses with a mean age 48.2, ranging from 24 to 63 years of age, who participated in six training courses. Questionnaire development resulted in a 16-item instrument, with each item is scored on a five-point Likert scale ranging from “strongly disagree” to “strongly agree.” Test–retest reliability of the M-BACK was completed by 30 of 31 nursing students recruited, ICCs ranged from 0.62 to 0.96.ConclusionThe M-BACK is a reliable measure of the key elements of practitioner perceptions of barriers, and their knowledge, attitudes, and confidence regarding metabolic monitoring in people with mental

  5. Confidence building in safety assessments

    International Nuclear Information System (INIS)

    Grundfelt, Bertil

    1999-01-01

    Future generations should be adequately protected from damage caused by the present disposal of radioactive waste. This presentation discusses the core of safety and performance assessment: The demonstration and building of confidence that the disposal system meets the safety requirements stipulated by society. The major difficulty is to deal with risks in the very long time perspective of the thousands of years during which the waste is hazardous. Concern about these problems has stimulated the development of the safety assessment discipline. The presentation concentrates on two of the elements of safety assessment: (1) Uncertainty and sensitivity analysis, and (2) validation and review. Uncertainty is associated both with respect to what is the proper conceptual model and with respect to parameter values for a given model. A special kind of uncertainty derives from the variation of a property in space. Geostatistics is one approach to handling spatial variability. The simplest way of doing a sensitivity analysis is to offset the model parameters one by one and observe how the model output changes. The validity of the models and data used to make predictions is central to the credibility of safety assessments for radioactive waste repositories. There are several definitions of model validation. The presentation discusses it as a process and highlights some aspects of validation methodologies

  6. Manual Therapy

    OpenAIRE

    Hakgüder, Aral; Kokino, Siranuş

    2002-01-01

    Manual therapy has been used in the treatment of pain and dysfunction of spinal and peripheral joints for more than a hundred years. Manual medicine includes manipulation, mobilization, and postisometric relaxation techniques. The aim of manual therapy is to enhance restricted movement caused by blockage of joints keeping postural balance, restore function and maintain optimal body mechanics. Anatomic, biomechanical, and neurophysiological evaluations of the leucomotor system is essential for...

  7. Robust misinterpretation of confidence intervals.

    Science.gov (United States)

    Hoekstra, Rink; Morey, Richard D; Rouder, Jeffrey N; Wagenmakers, Eric-Jan

    2014-10-01

    Null hypothesis significance testing (NHST) is undoubtedly the most common inferential technique used to justify claims in the social sciences. However, even staunch defenders of NHST agree that its outcomes are often misinterpreted. Confidence intervals (CIs) have frequently been proposed as a more useful alternative to NHST, and their use is strongly encouraged in the APA Manual. Nevertheless, little is known about how researchers interpret CIs. In this study, 120 researchers and 442 students-all in the field of psychology-were asked to assess the truth value of six particular statements involving different interpretations of a CI. Although all six statements were false, both researchers and students endorsed, on average, more than three statements, indicating a gross misunderstanding of CIs. Self-declared experience with statistics was not related to researchers' performance, and, even more surprisingly, researchers hardly outperformed the students, even though the students had not received any education on statistical inference whatsoever. Our findings suggest that many researchers do not know the correct interpretation of a CI. The misunderstandings surrounding p-values and CIs are particularly unfortunate because they constitute the main tools by which psychologists draw conclusions from data.

  8. Structures manual

    Science.gov (United States)

    2001-01-01

    This manual was written as a guide for use by design personnel in the Vermont Agency of Transportation Structures Section. This manual covers the design responsibilities of the Section. It does not cover other functions that are a part of the Structu...

  9. Quality Manual

    Science.gov (United States)

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  10. Reclaim your creative confidence.

    Science.gov (United States)

    Kelley, Tom; Kelley, David

    2012-12-01

    Most people are born creative. But over time, a lot of us learn to stifle those impulses. We become warier of judgment, more cautious more analytical. The world seems to divide into "creatives" and "noncreatives," and too many people resign themselves to the latter category. And yet we know that creativity is essential to success in any discipline or industry. The good news, according to authors Tom Kelley and David Kelley of IDEO, is that we all can rediscover our creative confidence. The trick is to overcome the four big fears that hold most of us back: fear of the messy unknown, fear of judgment, fear of the first step, and fear of losing control. The authors use an approach based on the work of psychologist Albert Bandura in helping patients get over their snake phobias: You break challenges down into small steps and then build confidence by succeeding on one after another. Creativity is something you practice, say the authors, not just a talent you are born with.

  11. Confidence in Numerical Simulations

    International Nuclear Information System (INIS)

    Hemez, Francois M.

    2015-01-01

    This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to ''forecast,'' that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists ''think.'' This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. ''Confidence'' derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.

  12. Globalization of consumer confidence

    Directory of Open Access Journals (Sweden)

    Çelik Sadullah

    2017-01-01

    Full Text Available The globalization of world economies and the importance of nowcasting analysis have been at the core of the recent literature. Nevertheless, these two strands of research are hardly coupled. This study aims to fill this gap through examining the globalization of the consumer confidence index (CCI by applying conventional and unconventional econometric methods. The US CCI is used as the benchmark in tests of comovement among the CCIs of several developing and developed countries, with the data sets divided into three sub-periods: global liquidity abundance, the Great Recession, and postcrisis. The existence and/or degree of globalization of the CCIs vary according to the period, whereas globalization in the form of coherence and similar paths is observed only during the Great Recession and, surprisingly, stronger in developing/emerging countries.

  13. The minimal manual: is less really more?

    NARCIS (Netherlands)

    Lazonder, Adrianus W.; van der Meij, Hans

    1993-01-01

    Carroll, Smith-Kerker, Ford and Mazur-Rimetz (The minimal manual, Human-Computer Interaction , 3, 123-153, 1987) have introduced the minimal manual as an alternative to standard self-instruction manuals. While their research indicates strong gains, only a few attempts have been made to validate

  14. Technical Manual: 2002 Series GED Tests

    Science.gov (United States)

    Ezzelle, Carol; Setzer, J. Carl

    2009-01-01

    This manual was written to provide technical information regarding the 2002 Series GED (General Educational Development) Tests. Throughout this manual, documentation is provided regarding the development of the GED Tests, data collection activities, as well as reliability and validity evidence. The purpose of this manual is to provide evidence…

  15. Manual muscle testing and hand-held dynamometry in people with inflammatory myopathy: An intra- and interrater reliability and validity study.

    Science.gov (United States)

    Baschung Pfister, Pierrette; de Bruin, Eling D; Sterkele, Iris; Maurer, Britta; de Bie, Rob A; Knols, Ruud H

    2018-01-01

    Manual muscle testing (MMT) and hand-held dynamometry (HHD) are commonly used in people with inflammatory myopathy (IM), but their clinimetric properties have not yet been sufficiently studied. To evaluate the reliability and validity of MMT and HHD, maximum isometric strength was measured in eight muscle groups across three measurement events. To evaluate reliability of HHD, intra-class correlation coefficients (ICC), the standard error of measurements (SEM) and smallest detectable changes (SDC) were calculated. To measure reliability of MMT linear Cohen`s Kappa was computed for single muscle groups and ICC for total score. Additionally, correlations between MMT8 and HHD were evaluated with Spearman Correlation Coefficients. Fifty people with myositis (56±14 years, 76% female) were included in the study. Intra-and interrater reliability of HHD yielded excellent ICCs (0.75-0.97) for all muscle groups, except for interrater reliability of ankle extension (0.61). The corresponding SEMs% ranged from 8 to 28% and the SDCs% from 23 to 65%. MMT8 total score revealed excellent intra-and interrater reliability (ICC>0.9). Intrarater reliability of single muscle groups was substantial for shoulder and hip abduction, elbow and neck flexion, and hip extension (0.64-0.69); moderate for wrist (0.53) and knee extension (0.49) and fair for ankle extension (0.35). Interrater reliability was moderate for neck flexion (0.54) and hip abduction (0.44); fair for shoulder abduction, elbow flexion, wrist and ankle extension (0.20-0.33); and slight for knee extension (0.08). Correlations between the two tests were low for wrist, knee, ankle, and hip extension; moderate for elbow flexion, neck flexion and hip abduction; and good for shoulder abduction. In conclusion, the MMT8 total score is a reliable assessment to consider general muscle weakness in people with myositis but not for single muscle groups. In contrast, our results confirm that HHD can be recommended to evaluate strength of

  16. Salinas : theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  17. Confidence in Numerical Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Hemez, Francois M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-23

    This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to “forecast,” that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists “think.” This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. “Confidence” derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.

  18. Evaluating Measures of Optimism and Sport Confidence

    Science.gov (United States)

    Fogarty, Gerard J.; Perera, Harsha N.; Furst, Andrea J.; Thomas, Patrick R.

    2016-01-01

    The psychometric properties of the Life Orientation Test-Revised (LOT-R), the Sport Confidence Inventory (SCI), and the Carolina SCI (CSCI) were examined in a study involving 260 athletes. The study aimed to test the dimensional structure, convergent and divergent validity, and invariance over competition level of scores generated by these…

  19. Biosafety Manual

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  20. A systematic review of maternal confidence for physiologic birth: characteristics of prenatal care and confidence measurement.

    Science.gov (United States)

    Avery, Melissa D; Saftner, Melissa A; Larson, Bridget; Weinfurter, Elizabeth V

    2014-01-01

    Because a focus on physiologic labor and birth has reemerged in recent years, care providers have the opportunity in the prenatal period to help women increase confidence in their ability to give birth without unnecessary interventions. However, most research has only examined support for women during labor. The purpose of this systematic review was to examine the research literature for information about prenatal care approaches that increase women's confidence for physiologic labor and birth and tools to measure that confidence. Studies were reviewed that explored any element of a pregnant woman's interaction with her prenatal care provider that helped build confidence in her ability to labor and give birth. Timing of interaction with pregnant women included during pregnancy, labor and birth, and the postpartum period. In addition, we looked for studies that developed a measure of women's confidence related to labor and birth. Outcome measures included confidence or similar concepts, descriptions of components of prenatal care contributing to maternal confidence for birth, and reliability and validity of tools measuring confidence. The search of MEDLINE, CINAHL, PsycINFO, and Scopus databases provided a total of 893 citations. After removing duplicates and articles that did not meet inclusion criteria, 6 articles were included in the review. Three relate to women's confidence for labor during the prenatal period, and 3 describe tools to measure women's confidence for birth. Research about enhancing women's confidence for labor and birth was limited to qualitative studies. Results suggest that women desire information during pregnancy and want to use that information to participate in care decisions in a relationship with a trusted provider. Further research is needed to develop interventions to help midwives and physicians enhance women's confidence in their ability to give birth and to develop a tool to measure confidence for use during prenatal care. © 2014 by

  1. GRACE manual

    International Nuclear Information System (INIS)

    Ishikawa, T.; Kawabata, S.; Shimizu, Y.; Kaneko, T.; Kato, K.; Tanaka, H.

    1993-02-01

    This manual is composed of three kinds of objects, theoretical background for calculating the cross section of elementary process, usage and technical details of the GRACE system. Throughout this manual we take the tree level process e + e - → W + W - γ as an example, including the e ± -scalar boson interactions. The real FORTRAN source code for this process is attached in the relevant sections as well as the results of calculation, which might be a great help for understanding the practical use of the system. (J.P.N.)

  2. The idiosyncratic nature of confidence.

    Science.gov (United States)

    Navajas, Joaquin; Hindocha, Chandni; Foda, Hebah; Keramati, Mehdi; Latham, Peter E; Bahrami, Bahador

    2017-11-01

    Confidence is the 'feeling of knowing' that accompanies decision making. Bayesian theory proposes that confidence is a function solely of the perceived probability of being correct. Empirical research has suggested, however, that different individuals may perform different computations to estimate confidence from uncertain evidence. To test this hypothesis, we collected confidence reports in a task where subjects made categorical decisions about the mean of a sequence. We found that for most individuals, confidence did indeed reflect the perceived probability of being correct. However, in approximately half of them, confidence also reflected a different probabilistic quantity: the perceived uncertainty in the estimated variable. We found that the contribution of both quantities was stable over weeks. We also observed that the influence of the perceived probability of being correct was stable across two tasks, one perceptual and one cognitive. Overall, our findings provide a computational interpretation of individual differences in human confidence.

  3. Metrication manual

    International Nuclear Information System (INIS)

    Harper, A.F.A.; Digby, R.B.; Thong, S.P.; Lacey, F.

    1978-04-01

    In April 1978 a meeting of senior metrication officers convened by the Commonwealth Science Council of the Commonwealth Secretariat, was held in London. The participants were drawn from Australia, Bangladesh, Britain, Canada, Ghana, Guyana, India, Jamaica, Papua New Guinea, Solomon Islands and Trinidad and Tobago. Among other things, the meeting resolved to develop a set of guidelines to assist countries to change to SI and to compile such guidelines in the form of a working manual

  4. Diverse interpretations of confidence building

    International Nuclear Information System (INIS)

    Macintosh, J.

    1998-01-01

    This paper explores the variety of operational understandings associated with the term 'confidence building'. Collectively, these understandings constitute what should be thought of as a 'family' of confidence building approaches. This unacknowledged and generally unappreciated proliferation of operational understandings that function under the rubric of confidence building appears to be an impediment to effective policy. The paper's objective is to analyze these different understandings, stressing the important differences in their underlying assumptions. In the process, the paper underlines the need for the international community to clarify its collective thinking about what it means when it speaks of 'confidence building'. Without enhanced clarity, it will be unnecessarily difficult to employ the confidence building approach effectively due to the lack of consistent objectives and common operating assumptions. Although it is not the intention of this paper to promote a particular account of confidence building, dissecting existing operational understandings should help to identify whether there are fundamental elements that define what might be termed 'authentic' confidence building. Implicit here is the view that some operational understandings of confidence building may diverge too far from consensus models to count as meaningful members of the confidence building family. (author)

  5. A scale for consumer confidence in the safety of food

    NARCIS (Netherlands)

    Jonge, de J.; Trijp, van J.C.M.; Lans, van der I.A.; Renes, R.J.; Frewer, L.J.

    2008-01-01

    The aim of this study was to develop and validate a scale to measure general consumer confidence in the safety of food. Results from exploratory and confirmatory analyses indicate that general consumer confidence in the safety of food consists of two distinct dimensions, optimism and pessimism,

  6. Nuclear power: restoring public confidence

    International Nuclear Information System (INIS)

    Arnold, L.

    1986-01-01

    The paper concerns a one day conference on nuclear power organised by the Centre for Science Studies and Science Policy, Lancaster, April 1986. Following the Chernobyl reactor accident, the conference concentrated on public confidence in nuclear power. Causes of lack of public confidence, public perceptions of risk, and the effect of Chernobyl in the United Kingdom, were all discussed. A Select Committee on the Environment examined the problems of radioactive waste disposal. (U.K.)

  7. Pdap Manual

    DEFF Research Database (Denmark)

    Pedersen, Mads Mølgaard; Larsen, Torben J.

    Pdap, Python Data Analysis Program, is a program for post processing, analysis, visualization and presentation of data e.g. simulation results and measurements. It is intended but not limited to the domain of wind turbines. It combines an intuitive graphical user interface with python scripting...... that allows automation and implementation of custom functions. This manual gives a short introduction to the graphical user interface, describes the mathematical background for some of the functions, describes the scripting API and finally a few examples on how automate analysis via scripting is presented....... The newest version, and more documentation and help on how to used, extend and automate Pdap can be found at the webpage www.hawc2.dk...

  8. Oregon School Bond Manual. Fourth Edition.

    Science.gov (United States)

    Oregon State Dept. of Education, Salem.

    The manual is intended to guide attorneys and officials of school districts in the issuance and sale of school district bonds. Purchasers of school district bonds rely on the recommendations of accredited bond attorneys who render opinions concerning the validity and legality of bond issues offered for sale. This manual is designed to assist in…

  9. On-line confidence monitoring during decision making.

    Science.gov (United States)

    Dotan, Dror; Meyniel, Florent; Dehaene, Stanislas

    2018-02-01

    Humans can readily assess their degree of confidence in their decisions. Two models of confidence computation have been proposed: post hoc computation using post-decision variables and heuristics, versus online computation using continuous assessment of evidence throughout the decision-making process. Here, we arbitrate between these theories by continuously monitoring finger movements during a manual sequential decision-making task. Analysis of finger kinematics indicated that subjects kept separate online records of evidence and confidence: finger deviation continuously reflected the ongoing accumulation of evidence, whereas finger speed continuously reflected the momentary degree of confidence. Furthermore, end-of-trial finger speed predicted the post-decisional subjective confidence rating. These data indicate that confidence is computed on-line, throughout the decision process. Speed-confidence correlations were previously interpreted as a post-decision heuristics, whereby slow decisions decrease subjective confidence, but our results suggest an adaptive mechanism that involves the opposite causality: by slowing down when unconfident, participants gain time to improve their decisions. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Confidence in critical care nursing.

    Science.gov (United States)

    Evans, Jeanne; Bell, Jennifer L; Sweeney, Annemarie E; Morgan, Jennifer I; Kelly, Helen M

    2010-10-01

    The purpose of the study was to gain an understanding of the nursing phenomenon, confidence, from the experience of nurses in the nursing subculture of critical care. Leininger's theory of cultural care diversity and universality guided this qualitative descriptive study. Questions derived from the sunrise model were used to elicit nurses' perspectives about cultural and social structures that exist within the critical care nursing subculture and the influence that these factors have on confidence. Twenty-eight critical care nurses from a large Canadian healthcare organization participated in semistructured interviews about confidence. Five themes arose from the descriptions provided by the participants. The three themes, tenuously navigating initiation rituals, deliberately developing holistic supportive relationships, and assimilating clinical decision-making rules were identified as social and cultural factors related to confidence. The remaining two themes, preserving a sense of security despite barriers and accommodating to diverse challenges, were identified as environmental factors related to confidence. Practice and research implications within the culture of critical care nursing are discussed in relation to each of the themes.

  11. Professional confidence: a concept analysis.

    Science.gov (United States)

    Holland, Kathlyn; Middleton, Lyn; Uys, Leana

    2012-03-01

    Professional confidence is a concept that is frequently used and or implied in occupational therapy literature, but often without specifying its meaning. Rodgers's Model of Concept Analysis was used to analyse the term "professional confidence". Published research obtained from a federated search in four health sciences databases was used to inform the concept analysis. The definitions, attributes, antecedents, and consequences of professional confidence as evidenced in the literature are discussed. Surrogate terms and related concepts are identified, and a model case of the concept provided. Based on the analysis, professional confidence can be described as a dynamic, maturing personal belief held by a professional or student. This includes an understanding of and a belief in the role, scope of practice, and significance of the profession, and is based on their capacity to competently fulfil these expectations, fostered through a process of affirming experiences. Developing and fostering professional confidence should be nurtured and valued to the same extent as professional competence, as the former underpins the latter, and both are linked to professional identity.

  12. Caltrans : construction manual

    Science.gov (United States)

    2009-08-01

    Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

  13. An Introduction to Confidence Intervals for Both Statistical Estimates and Effect Sizes.

    Science.gov (United States)

    Capraro, Mary Margaret

    This paper summarizes methods of estimating confidence intervals, including classical intervals and intervals for effect sizes. The recent American Psychological Association (APA) Task Force on Statistical Inference report suggested that confidence intervals should always be reported, and the fifth edition of the APA "Publication Manual"…

  14. Robust misinterpretation of confidence intervals

    NARCIS (Netherlands)

    Hoekstra, Rink; Morey, Richard; Rouder, Jeffrey N.; Wagenmakers, Eric-Jan

    2014-01-01

    Null hypothesis significance testing (NHST) is undoubtedly the most common inferential technique used to justify claims in the social sciences. However, even staunch defenders of NHST agree that its outcomes are often misinterpreted. Confidence intervals (CIs) have frequently been proposed as a more

  15. Confidence scores for prediction models

    DEFF Research Database (Denmark)

    Gerds, Thomas Alexander; van de Wiel, MA

    2011-01-01

    In medical statistics, many alternative strategies are available for building a prediction model based on training data. Prediction models are routinely compared by means of their prediction performance in independent validation data. If only one data set is available for training and validation,...

  16. Sierra Structural Dynamics Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Garth M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-19

    Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Sierra/SD. For a more detailed description of how to use Sierra/SD , we refer the reader to Sierra/SD, User's Notes . Many of the constructs in Sierra/SD are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Sierra/SD are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature. This page intentionally left blank.

  17. Methodology for building confidence measures

    Science.gov (United States)

    Bramson, Aaron L.

    2004-04-01

    This paper presents a generalized methodology for propagating known or estimated levels of individual source document truth reliability to determine the confidence level of a combined output. Initial document certainty levels are augmented by (i) combining the reliability measures of multiply sources, (ii) incorporating the truth reinforcement of related elements, and (iii) incorporating the importance of the individual elements for determining the probability of truth for the whole. The result is a measure of confidence in system output based on the establishing of links among the truth values of inputs. This methodology was developed for application to a multi-component situation awareness tool under development at the Air Force Research Laboratory in Rome, New York. Determining how improvements in data quality and the variety of documents collected affect the probability of a correct situational detection helps optimize the performance of the tool overall.

  18. Alan Greenspan, the confidence strategy

    Directory of Open Access Journals (Sweden)

    Edwin Le Heron

    2006-12-01

    Full Text Available To evaluate the Greenspan era, we nevertheless need to address three questions: Is his success due to talent or just luck? Does he have a system of monetary policy or is he himself the system? What will be his legacy? Greenspan was certainly lucky, but he was also clairvoyant. Above all, he has developed a profoundly original monetary policy. His confidence strategy is clearly opposed to the credibility strategy developed in central banks and the academic milieu after 1980, but also inflation targeting, which today constitutes the mainstream monetary policy regime. The question of his legacy seems more nuanced. However, Greenspan will remain 'for a considerable period of time' a highly heterodox and original central banker. His political vision, his perception of an uncertain world, his pragmatism and his openness form the structure of a powerful alternative system, the confidence strategy, which will leave its mark on the history of monetary policy.

  19. Systems analysis programs for Hands-on integrated reliability evaluations (SAPHIRE) Version 5.0: Verification and validation (V ampersand V) manual. Volume 9

    International Nuclear Information System (INIS)

    Jones, J.L.; Calley, M.B.; Capps, E.L.; Zeigler, S.L.; Galyean, W.J.; Novack, S.D.; Smith, C.L.; Wolfram, L.M.

    1995-03-01

    A verification and validation (V ampersand V) process has been performed for the System Analysis Programs for Hands-on Integrated Reliability Evaluation (SAPHIRE) Version 5.0. SAPHIRE is a set of four computer programs that NRC developed for performing probabilistic risk assessments. They allow an analyst to perform many of the functions necessary to create, quantify, and evaluate the risk associated with a facility or process being analyzed. The programs are Integrated Reliability and Risk Analysis System (IRRAS) System Analysis and Risk Assessment (SARA), Models And Results Database (MAR-D), and Fault tree, Event tree, and Piping and instrumentation diagram (FEP) graphical editor. Intent of this program is to perform a V ampersand V of successive versions of SAPHIRE. Previous efforts have been the V ampersand V of SAPHIRE Version 4.0. The SAPHIRE 5.0 V ampersand V plan is based on the SAPHIRE 4.0 V ampersand V plan with revisions to incorporate lessons learned from the previous effort. Also, the SAPHIRE 5.0 vital and nonvital test procedures are based on the test procedures from SAPHIRE 4.0 with revisions to include the new SAPHIRE 5.0 features as well as to incorporate lessons learned from the previous effort. Most results from the testing were acceptable; however, some discrepancies between expected code operation and actual code operation were identified. Modifications made to SAPHIRE are identified

  20. Trust versus confidence: Microprocessors and personnel monitoring

    International Nuclear Information System (INIS)

    Chiaro, P.J. Jr.

    1993-01-01

    Due to recent technological advances, substantial improvements have been made in personnel contamination monitoring. In all likelihood, these advances will close out the days of manually frisking personnel for radioactive contamination. Unfortunately, as microprocessor-based monitors become more widely used, not only at commercial power reactors but also at government facilities, questions concerning their trustworthiness arise. Algorithms make decisions that were previously made by technicians. Trust is placed not in technicians but in machines. In doing this it is assumed that the machine never misses. Inevitably, this trust drops, due largely to open-quotes false alarms.close quotes This is especially true when monitoring for alpha contamination. What is a open-quotes false alarm?close quotes Do these machines and their algorithms that we put our trust in make mistakes? An analysis was performed on half-body and hand-and-foot monitors at Oak Ridge National Laboratory (ORNL) in order to justify the suggested confidence level used for alarm point determination. Sources used in this analysis had activities approximating ORNL's contamination limits

  1. Trust versus confidence: Microprocessors and personnel monitoring

    International Nuclear Information System (INIS)

    Chiaro, P.J. Jr.

    1993-01-01

    Due to recent technological advances, substantial improvements have been made in personnel contamination monitoring. In all likelihood, these advances will close out the days of manually frisking personnel for radioactive contamination. Unfortunately, as microprocessor-based monitors become more widely used, not only at commercial power reactors but also at government facilities, questions concerning their trustworthiness arise. Algorithms make decisions that were previously made by technicians. Trust is placed not in technicians but in machines. In doing this it is assumed that the machine never misses. Inevitably, this trust drops, due largely to ''false alarms''. This is especially true when monitoring for alpha contamination. What is a ''false alarm''? Do these machines and their algorithms that we put our trust in make mistakes? An analysis was performed on half-body and hand-and-foot monitors at Oak Ridge National Laboratory (ORNL) in order to justify the suggested confidence level used for alarm point determination. Sources used in this analysis had activities approximating ORNL's contamination limits

  2. Trust versus confidence: Microprocessors and personnel monitoring

    International Nuclear Information System (INIS)

    Chiaro, P.J. Jr.

    1994-01-01

    Due to recent technological advances, substantial improvements have been made in personnel contamination monitoring. In all likelihood, these advances will close out the days of manually frisking personnel for radioactive contamination. Unfortunately, as microprocessor-based monitors become more widely used, not only at commercial power reactors but also at government facilities, questions concerning their trustworthiness arise. Algorithms make decisions that were previously made by technicians. Trust is placed not in technicians but in machines. In doing this it is assumed that the machine never misses. Inevitably, this trust drops, due largely to ''false alarms''. This is especially true when monitoring for alpha contamination. What is a ''false alarm''? Do these machines and their algorithms that they put their trust in make mistakes? An analysis was performed on half-body and hand-and-foot monitors at Oak Ridge National Laboratory (ORNL) in order to justify the suggested confidence level used for alarm point determination. Sources used in this analysis had activities approximating ORNL's contamination limits

  3. GRSAC Users Manual

    International Nuclear Information System (INIS)

    Ball, S.J.; Nypaver, D.J.

    1999-01-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model

  4. GRSAC Users Manual

    Energy Technology Data Exchange (ETDEWEB)

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  5. Leadership by Confidence in Teams

    OpenAIRE

    Kobayashi, Hajime; Suehiro, Hideo

    2008-01-01

    We study endogenous signaling by analyzing a team production problem with endogenous timing. Each agent of the team is privately endowed with some level of confidence about team productivity. Each of them must then commit a level of effort in one of two periods. At the end of each period, each agent observes his partner' s move in this period. Both agents are rewarded by a team output determined by team productivity and total invested effort. Each agent must personally incur the cost of effor...

  6. Towards confidence in transport safety

    International Nuclear Information System (INIS)

    Robison, R.W.

    1992-01-01

    The U.S. Department of Energy (US DOE) plans to demonstrate to the public that high-level waste can be transported safely to the proposed repository. The author argues US DOE should begin now to demonstrate its commitment to safety by developing an extraordinary safety program for nuclear cargo it is now shipping. The program for current shipments should be developed with State, Tribal, and local officials. Social scientists should be involved in evaluating the effect of the safety program on public confidence. The safety program developed in cooperation with western states for shipments to the Waste Isolation Pilot plant is a good basis for designing that extraordinary safety program

  7. Step-by-Step Visual Manuals: Design and Development

    Science.gov (United States)

    Urata, Toshiyuki

    2004-01-01

    The types of handouts and manuals that are used in technology training vary. Some describe procedures in a narrative way without graphics; some employ step-by-step instructions with screen captures. According to Thirlway (1994), a training manual should be like a tutor that permits a student to learn at his own pace and gives him confidence for…

  8. TRANSWRAP II: problem definition manual

    International Nuclear Information System (INIS)

    Knittle, D.E.

    1981-02-01

    The TRANSWRAP II computer code, written in Fortran IV and described in this Problem Definition Manual, was developed to analytically predict the magnitude of pressure pulses of large scale sodium-wate reactions in LMFBR secondary systems. It is currently being used for the Clinch River Breeder Reactor Program. The code provides the options, flexibility and features necessary to consider any system configuration. The code methodology has been validated with the aid of extensive sodium-water reaction test programs

  9. Workshop on confidence limits. Proceedings

    International Nuclear Information System (INIS)

    James, F.; Lyons, L.; Perrin, Y.

    2000-01-01

    The First Workshop on Confidence Limits was held at CERN on 17-18 January 2000. It was devoted to the problem of setting confidence limits in difficult cases: number of observed events is small or zero, background is larger than signal, background not well known, and measurements near a physical boundary. Among the many examples in high-energy physics are searches for the Higgs, searches for neutrino oscillations, B s mixing, SUSY, compositeness, neutrino masses, and dark matter. Several different methods are on the market: the CL s methods used by the LEP Higgs searches; Bayesian methods; Feldman-Cousins and modifications thereof; empirical and combined methods. The Workshop generated considerable interest, and attendance was finally limited by the seating capacity of the CERN Council Chamber where all the sessions took place. These proceedings contain all the papers presented, as well as the full text of the discussions after each paper and of course the last session which was a discussion session. The list of participants and the 'required reading', which was expected to be part of the prior knowledge of all participants, are also included. (orig.)

  10. The Great Recession and confidence in homeownership

    OpenAIRE

    Anat Bracha; Julian Jamison

    2013-01-01

    Confidence in homeownership shifts for those who personally experienced real estate loss during the Great Recession. Older Americans are confident in the value of homeownership. Younger Americans are less confident.

  11. Confidence crisis of results in biomechanics research.

    Science.gov (United States)

    Knudson, Duane

    2017-11-01

    Many biomechanics studies have small sample sizes and incorrect statistical analyses, so reporting of inaccurate inferences and inflated magnitude of effects are common in the field. This review examines these issues in biomechanics research and summarises potential solutions from research in other fields to increase the confidence in the experimental effects reported in biomechanics. Authors, reviewers and editors of biomechanics research reports are encouraged to improve sample sizes and the resulting statistical power, improve reporting transparency, improve the rigour of statistical analyses used, and increase the acceptance of replication studies to improve the validity of inferences from data in biomechanics research. The application of sports biomechanics research results would also improve if a larger percentage of unbiased effects and their uncertainty were reported in the literature.

  12. Public confidence and nuclear energy

    International Nuclear Information System (INIS)

    Chaussade, J.P.

    1990-01-01

    Today in France there are 54 nuclear power units in operation at 18 sites. They supply 75% of all electricity produced, 12% of which is exported to neighbouring countries, and play an important role in the French economy. For the French, nuclear power is a fact of life, and most accept it. However, the accident of Chernobyl has made public opinion more sensitive, and the public relations work has had to be reconsidered carefully with a view to increase the confidence of the French public in nuclear power, anticipating media crises and being equipped to deal with such crises. The three main approaches are the following: keeping the public better informed, providing clear information at time of crisis and international activities

  13. Knowledge, Self Confidence and Courage

    DEFF Research Database (Denmark)

    Selberg, Hanne; Steenberg Holtzmann, Jette; Hovedskov, Jette

    . Results The students identified their major learning outcomes as transfer of operational skills, experiencing self-efficacy and enhanced understanding of the patients' perspective.Involving simulated patients in the training of technical skills contributed to the development of the students' communication......Knowledge, self confidence and courage – long lasting learning outcomes through simulation in a clinical context. Hanne Selberg1, Jette Hovedskov2, Jette Steenberg Holtzmann2 The significance and methodology of the researchThe study focuses on simulation alongside the clinical practice and linked...... Development, Clinical Lecturer, Metropolitan University College, Faculty of Nursing, Email: hase@phoe.dk, phone: +45-72282830. 2. Jette Hovedskov, RN, Development Consultant, Glostrup University Hospital, Department of Development Email : jeho@glo.regionh.dk ,phone: +45- 43232090 3. Jette Holtzmann Steenberg...

  14. 11th GCC Closed Forum: cumulative stability; matrix stability; immunogenicity assays; laboratory manuals; biosimilars; chiral methods; hybrid LBA/LCMS assays; fit-for-purpose validation; China Food and Drug Administration bioanalytical method validation.

    Science.gov (United States)

    Islam, Rafiq; Briscoe, Chad; Bower, Joseph; Cape, Stephanie; Arnold, Mark; Hayes, Roger; Warren, Mark; Karnik, Shane; Stouffer, Bruce; Xiao, Yi Qun; van der Strate, Barry; Sikkema, Daniel; Fang, Xinping; Tudoroniu, Ariana; Tayyem, Rabab; Brant, Ashley; Spriggs, Franklin; Barry, Colin; Khan, Masood; Keyhani, Anahita; Zimmer, Jennifer; Caturla, Maria Cruz; Couerbe, Philippe; Khadang, Ardeshir; Bourdage, James; Datin, Jim; Zemo, Jennifer; Hughes, Nicola; Fatmi, Saadya; Sheldon, Curtis; Fountain, Scott; Satterwhite, Christina; Colletti, Kelly; Vija, Jenifer; Yu, Mathilde; Stamatopoulos, John; Lin, Jenny; Wilfahrt, Jim; Dinan, Andrew; Ohorodnik, Susan; Hulse, James; Patel, Vimal; Garofolo, Wei; Savoie, Natasha; Brown, Michael; Papac, Damon; Buonarati, Mike; Hristopoulos, George; Beaver, Chris; Boudreau, Nadine; Williard, Clark; Liu, Yansheng; Ray, Gene; Warrino, Dominic; Xu, Allan; Green, Rachel; Hayward-Sewell, Joanne; Marcelletti, John; Sanchez, Christina; Kennedy, Michael; Charles, Jessica St; Bouhajib, Mohammed; Nehls, Corey; Tabler, Edward; Tu, Jing; Joyce, Philip; Iordachescu, Adriana; DuBey, Ira; Lindsay, John; Yamashita, Jim; Wells, Edward

    2018-04-01

    The 11th Global CRO Council Closed Forum was held in Universal City, CA, USA on 3 April 2017. Representatives from international CRO members offering bioanalytical services were in attendance in order to discuss scientific and regulatory issues specific to bioanalysis. The second CRO-Pharma Scientific Interchange Meeting was held on 7 April 2017, which included Pharma representatives' sharing perspectives on the topics discussed earlier in the week with the CRO members. The issues discussed at the meetings included cumulative stability evaluations, matrix stability evaluations, the 2016 US FDA Immunogenicity Guidance and recent and unexpected FDA Form 483s on immunogenicity assays, the bioanalytical laboratory's role in writing PK sample collection instructions, biosimilars, CRO perspectives on the use of chiral versus achiral methods, hybrid LBA/LCMS assays, applications of fit-for-purpose validation and, at the Global CRO Council Closed Forum only, the status and trend of current regulated bioanalytical practice in China under CFDA's new BMV policy. Conclusions from discussions of these topics at both meetings are included in this report.

  15. A Manual of Style.

    Science.gov (United States)

    Nebraska State Dept. of Education, Lincoln.

    This "Manual of Style" is offered as a guide to assist Nebraska State employees in producing quality written communications and in presenting a consistently professional image of government documents. The manual is not designed to be all-inclusive. Sections of the manual discuss formatting documents, memorandums, letters, mailing…

  16. Estimation of rumen microbial protein production from purine derivatives in urine. A laboratory manual for the FAO/IAEA co-ordinated research programme on development, standardization and validation of nuclear based technologies for measuring microbial protein supply in ruminant livestock for improving productivity

    International Nuclear Information System (INIS)

    1997-05-01

    This laboratory manual contains the methodologies used in the standardization and validation of the urine purine derivative technique for estimating microbial protein supply to the rumen. It includes descriptions of methods that involve both radioactive and stable isotopes as well as non isotopic techniques such as chemical assays, since it has been recognised that while isotopic trace techniques provide a powerful tool for nutrition research they can not and should not be used in isolation. Refs, figs, tabs

  17. High Confidence Software and Systems Research Needs

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — This White Paper presents a survey of high confidence software and systems research needs. It has been prepared by the High Confidence Software and Systems...

  18. CSTEM User Manual

    Science.gov (United States)

    Hartle, M.; McKnight, R. L.

    2000-01-01

    This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

  19. Confidence Building Strategies in the Public Schools.

    Science.gov (United States)

    Achilles, C. M.; And Others

    1985-01-01

    Data from the Phi Delta Kappa Commission on Public Confidence in Education indicate that "high-confidence" schools make greater use of marketing and public relations strategies. Teacher attitudes were ranked first and administrator attitudes second by 409 respondents for both gain and loss of confidence in schools. (MLF)

  20. Microbial ecology laboratory procedures manual NASA/MSFC

    Science.gov (United States)

    Huff, Timothy L.

    1990-01-01

    An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.

  1. Radiological Control Manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  2. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-06-18

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  3. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-03-25

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  4. Radiological Control Manual

    International Nuclear Information System (INIS)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records

  5. HASL procedures manual

    International Nuclear Information System (INIS)

    Harley, J.H.

    1977-08-01

    Additions and corrections to the following sections of the HASL Procedures Manual are provided: General, Sampling, Field Measurements; General Analytical Chemistry, Chemical Procedures, Data Section, and Specifications

  6. PCs The Missing Manual

    CERN Document Server

    Karp, David

    2005-01-01

    Your vacuum comes with one. Even your blender comes with one. But your PC--something that costs a whole lot more and is likely to be used daily and for tasks of far greater importance and complexity--doesn't come with a printed manual. Thankfully, that's not a problem any longer: PCs: The Missing Manual explains everything you need to know about PCs, both inside and out, and how to keep them running smoothly and working the way you want them to work. A complete PC manual for both beginners and power users, PCs: The Missing Manual has something for everyone. PC novices will appreciate the una

  7. Bigfoot Field Manual, Version 2.1

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J.L.; Burrows, S.; Gower, S.T.; Cohen, W.B.

    1999-09-01

    The BigFoot Project is funded by the Earth Science Enterprise to collect and organize data to be used in the National Aeronautics and Space Administration's Earth Observing System (EOS) Validation Program. The data collected by the BigFoot Project are unique in being ground-based observations coincident with satellite overpasses. In addition to collecting data, the BigFoot project will develop and test new algorithms for scaling point measurements to the same spatial scales as the EOS satellite products. This BigFoot Field Manual will be used to achieve completeness and consistency of data collected at four initial BigFoot sites and at future sites that may collect similar validation data. Therefore, validation datasets submitted to the Oak Ridge National Laboratory Distributed Active Archive Center that have been compiled in a manner consistent with the field manual will be especially valuable in the validation program.

  8. Manual Performance Deterioration in the Cold

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2009-01-01

    Manual performance during military operations in cold and windy climates is severely hampered by decreased dexterity, but valid dexterity decrease predictors based on climatic factors are scarce. Therefore, this study investigated the decrease in finger dexterity for nine combinations of ambient

  9. Oil Spill Response Manual

    NARCIS (Netherlands)

    Marieke Zeinstra; Sandra Heins; Wierd Koops

    2014-01-01

    A two year programme has been carried out by the NHL University of Applied Sciences together with private companies in the field of oil and chemical spill response to finalize these manuals on oil and chemical spill response. These manuals give a good overview of all aspects of oil and chemical

  10. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  11. Eco-Innovation Manual

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.; Pigosso, Daniela Cristina Antelmi

    Aim of this manual is to introduce a methodology for the implementation of eco‐innovation within small and medium sized companies in developing and emerging economies. The intended audience of this manual is organizations that provide professional services to guide and support manufacturing compa...... companies to improve their sustainability performance....

  12. Marketing Research. Instructor's Manual.

    Science.gov (United States)

    Small Business Administration, Washington, DC.

    Prepared for the Administrative Management Course Program, this instructor's manual was developed to serve small-business management needs. The sections of the manual are as follows: (1) Lesson Plan--an outline of material covered, which may be used as a teaching guide, presented in two columns: the presentation, and a step-by-step indication of…

  13. Indoor Air Quality Manual.

    Science.gov (United States)

    Baldwin Union Free School District, NY.

    This manual identifies ways to improve a school's indoor air quality (IAQ) and discusses practical actions that can be carried out by school staff in managing air quality. The manual includes discussions of the many sources contributing to school indoor air pollution and the preventive planning for each including renovation and repair work,…

  14. GERTS GQ User's Manual.

    Science.gov (United States)

    Akiba, Y.; And Others

    This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

  15. CRISP instrument manual

    International Nuclear Information System (INIS)

    Bucknall, D.G.; Langridge, Sean

    1997-05-01

    This document is a user manual for CRISP, one of the two neutron reflectomers at ISIS. CRISP is highly automated allowing precision reproducible measurements. The manual provides detailed instructions for the setting-up and running of the instrument and advice on data analysis. (UK)

  16. Regional Competition for Confidence: Features of Formation

    Directory of Open Access Journals (Sweden)

    Irina Svyatoslavovna Vazhenina

    2016-09-01

    Full Text Available The increase in economic independence of the regions inevitably leads to an increase in the quality requirements of the regional economic policy. The key to successful regional policy, both during its development and implementation, is the understanding of the necessity of gaining confidence (at all levels, and the inevitable participation in the competition for confidence. The importance of confidence in the region is determined by its value as a competitive advantage in the struggle for partners, resources and tourists, and attracting investments. In today’s environment the focus of governments, regions and companies on long-term cooperation is clearly expressed, which is impossible without a high level of confidence between partners. Therefore, the most important competitive advantages of territories are intangible assets such as an attractive image and a good reputation, which builds up confidence of the population and partners. The higher the confidence in the region is, the broader is the range of potential partners, the larger is the planning horizon of long-term concerted action, the better are the chances of acquiring investment, the higher is the level of competitive immunity of the territories. The article defines competition for confidence as purposeful behavior of a market participant in economic environment, aimed at acquiring specific intangible competitive advantage – the confidence of the largest possible number of other market actors. The article also highlights the specifics of confidence as a competitive goal, presents factors contributing to the destruction of confidence, proposes a strategy to fight for confidence as a program of four steps, considers the factors which integrate regional confidence and offers several recommendations for the establishment of effective regional competition for confidence

  17. LipiDex: An Integrated Software Package for High-Confidence Lipid Identification.

    Science.gov (United States)

    Hutchins, Paul D; Russell, Jason D; Coon, Joshua J

    2018-04-17

    State-of-the-art proteomics software routinely quantifies thousands of peptides per experiment with minimal need for manual validation or processing of data. For the emerging field of discovery lipidomics via liquid chromatography-tandem mass spectrometry (LC-MS/MS), comparably mature informatics tools do not exist. Here, we introduce LipiDex, a freely available software suite that unifies and automates all stages of lipid identification, reducing hands-on processing time from hours to minutes for even the most expansive datasets. LipiDex utilizes flexible in silico fragmentation templates and lipid-optimized MS/MS spectral matching routines to confidently identify and track hundreds of lipid species and unknown compounds from diverse sample matrices. Unique spectral and chromatographic peak purity algorithms accurately quantify co-isolation and co-elution of isobaric lipids, generating identifications that match the structural resolution afforded by the LC-MS/MS experiment. During final data filtering, ionization artifacts are removed to significantly reduce dataset redundancy. LipiDex interfaces with several LC-MS/MS software packages, enabling robust lipid identification to be readily incorporated into pre-existing data workflows. Copyright © 2018 Elsevier Inc. All rights reserved.

  18. MARS CODE MANUAL VOLUME III - Programmer's Manual

    International Nuclear Information System (INIS)

    Chung, Bub Dong; Hwang, Moon Kyu; Jeong, Jae Jun; Kim, Kyung Doo; Bae, Sung Won; Lee, Young Jin; Lee, Won Jae

    2010-02-01

    Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This programmer's manual provides a complete list of overall information of code structure and input/output function of MARS. In addition, brief descriptions for each subroutine and major variables used in MARS are also included in this report, so that this report would be very useful for the code maintenance. The overall structure of the manual is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

  19. Egyptian Mythological Manuals

    DEFF Research Database (Denmark)

    Jørgensen, Jens Kristoffer Blach

    From the hands of Greek mythographers a great number of myths have survived along with philosophical discussions of their meaning and relevance for the Greeks. It is little known that something similar existed in ancient Egypt where temple libraries and archives held scholarly literature used...... by the native priesthood, much of which has only been published in recent years. As part of this corpus of texts, the ancient Egyptian mythological manuals offer a unique perspective on how the Egyptian priesthood structured and interpreted Egyptian myths. The thesis looks at the different interpretative...... techniques used in the Tebtunis Mythological Manual (Second century CE) and the Mythological Manual of the Delta (Sixth century BCE) and the place of these manuals within the larger corpus of priestly scholarly literature from ancient Egypt. To organize the wealth of local myths the manuals use model...

  20. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  1. SAM Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Rui [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-01

    The System Analysis Module (SAM) is an advanced and modern system analysis tool being developed at Argonne National Laboratory under the U.S. DOE Office of Nuclear Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM development aims for advances in physical modeling, numerical methods, and software engineering to enhance its user experience and usability for reactor transient analyses. To facilitate the code development, SAM utilizes an object-oriented application framework (MOOSE), and its underlying meshing and finite-element library (libMesh) and linear and non-linear solvers (PETSc), to leverage modern advanced software environments and numerical methods. SAM focuses on modeling advanced reactor concepts such as SFRs (sodium fast reactors), LFRs (lead-cooled fast reactors), and FHRs (fluoride-salt-cooled high temperature reactors) or MSRs (molten salt reactors). These advanced concepts are distinguished from light-water reactors in their use of single-phase, low-pressure, high-temperature, and low Prandtl number (sodium and lead) coolants. As a new code development, the initial effort has been focused on modeling and simulation capabilities of heat transfer and single-phase fluid dynamics responses in Sodium-cooled Fast Reactor (SFR) systems. The system-level simulation capabilities of fluid flow and heat transfer in general engineering systems and typical SFRs have been verified and validated. This document provides the theoretical and technical basis of the code to help users understand the underlying physical models (such as governing equations, closure models, and component models), system modeling approaches, numerical discretization and solution methods, and the overall capabilities in SAM. As the code is still under ongoing development, this SAM Theory Manual will be updated periodically to keep it consistent with the state of the development.

  2. Salinas : theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2004-08-01

    This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

  3. Fire Protection Program Manual

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  4. Interpretation of Confidence Interval Facing the Conflict

    Science.gov (United States)

    Andrade, Luisa; Fernández, Felipe

    2016-01-01

    As literature has reported, it is usual that university students in statistics courses, and even statistics teachers, interpret the confidence level associated with a confidence interval as the probability that the parameter value will be between the lower and upper interval limits. To confront this misconception, class activities have been…

  5. Self-Confidence in the Hospitality Industry

    Directory of Open Access Journals (Sweden)

    Michael Oshins

    2014-02-01

    Full Text Available Few industries rely on self-confidence to the extent that the hospitality industry does because guests must feel welcome and that they are in capable hands. This article examines the results of hundreds of student interviews with industry professionals at all levels to determine where the majority of the hospitality industry gets their self-confidence.

  6. Consumer confidence or the business cycle

    DEFF Research Database (Denmark)

    Møller, Stig Vinther; Nørholm, Henrik; Rangvid, Jesper

    2014-01-01

    Answer: The business cycle. We show that consumer confidence and the output gap both excess returns on stocks in many European countries: When the output gap is positive (the economy is doing well), expected returns are low, and when consumer confidence is high, expected returns are also low...

  7. Financial Literacy, Confidence and Financial Advice Seeking

    NARCIS (Netherlands)

    Kramer, Marc M.

    2016-01-01

    We find that people with higher confidence in their own financial literacy are less likely to seek financial advice, but no relation between objective measures of literacy and advice seeking. The negative association between confidence and advice seeking is more pronounced among wealthy households.

  8. Confidence Interval Approximation For Treatment Variance In ...

    African Journals Online (AJOL)

    In a random effects model with a single factor, variation is partitioned into two as residual error variance and treatment variance. While a confidence interval can be imposed on the residual error variance, it is not possible to construct an exact confidence interval for the treatment variance. This is because the treatment ...

  9. Aging and Confidence Judgments in Item Recognition

    Science.gov (United States)

    Voskuilen, Chelsea; Ratcliff, Roger; McKoon, Gail

    2018-01-01

    We examined the effects of aging on performance in an item-recognition experiment with confidence judgments. A model for confidence judgments and response time (RTs; Ratcliff & Starns, 2013) was used to fit a large amount of data from a new sample of older adults and a previously reported sample of younger adults. This model of confidence…

  10. Organic labbeling systems and consumer confidence

    OpenAIRE

    Sønderskov, Kim Mannemar; Daugbjerg, Carsten

    2009-01-01

    A research analysis suggests that a state certification and labelling system creates confidence in organic labelling systems and consequently green consumerism. Danish consumers have higher levels of confidence in the labelling system than consumers in countries where the state plays a minor role in labelling and certification.

  11. Self-confidence and metacognitive processes

    Directory of Open Access Journals (Sweden)

    Kleitman Sabina

    2005-01-01

    Full Text Available This paper examines the status of Self-confidence trait. Two studies strongly suggest that Self-confidence is a component of metacognition. In the first study, participants (N=132 were administered measures of Self-concept, a newly devised Memory and Reasoning Competence Inventory (MARCI, and a Verbal Reasoning Test (VRT. The results indicate a significant relationship between confidence ratings on the VRT and the Reasoning component of MARCI. The second study (N=296 employed an extensive battery of cognitive tests and several metacognitive measures. Results indicate the presence of robust Self-confidence and Metacognitive Awareness factors, and a significant correlation between them. Self-confidence taps not only processes linked to performance on items that have correct answers, but also beliefs about events that may never occur.

  12. HASL procedures manual

    International Nuclear Information System (INIS)

    1980-08-01

    Addition and corrections to the following sections of the HASL Procedures Manual are provided: Table of Contents; Bibliography; Fallout Collection Methods; Wet/Dry Fallout Collection; Fluoride in Soil and Sediment; Strontium-90; Natural Series; Alpha Emitters; and Gamma Emitters

  13. SEVERO code - user's manual

    International Nuclear Information System (INIS)

    Sacramento, A.M. do.

    1989-01-01

    This user's manual contains all the necessary information concerning the use of SEVERO code. This computer code is related to the statistics of extremes = extreme winds, extreme precipitation and flooding hazard risk analysis. (A.C.A.S.)

  14. The organizational measurement manual

    National Research Council Canada - National Science Library

    Wealleans, David

    2001-01-01

    ... Relationship of process to strategic measurements Summary 37 36Contents 19/10/2000 1:23 pm Page vi vi THE ORGANIZATIONAL MEASUREMENT MANUAL 4 PART 2 ESTABLISHING A PROCESS MEASUREMENT PROGRAMME...

  15. Geochemical engineering reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Owen, L.B.; Michels, D.E.

    1984-01-01

    The following topics are included in this manual: physical and chemical properties of geothermal brine and steam, scale and solids control, processing spent brine for reinjection, control of noncondensable gas emissions, and goethermal mineral recovery. (MHR)

  16. NCDC Archive Documentation Manuals

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Climatic Data Center Tape Deck Documentation library is a collection of over 400 manuals describing NCDC's digital holdings (both historic and current)....

  17. EMAP Users Manual.

    Science.gov (United States)

    Kotz, Arnold; Redondo, Rory

    Presented is the user's manual for the Educational Manpower Information Sources Project (EMAP), an information file containing approximately 325 document abstracts related to the field of educational planning. (The EMAP file is described in document SP 006 747.) (JB)

  18. FINAS. Example manual. 2

    International Nuclear Information System (INIS)

    Iwata, Koji; Tsukimori, Kazuyuki; Ueno, Mutsuo

    2003-12-01

    FINAS is a general purpose structural analysis computer program which was developed by Japan Nuclear Cycle Development Institute for the analysis of static, dynamic and thermal responses of elastic and inelastic structures by the finite element method. This manual contains typical analysis examples that illustrate applications of FINAS to a variety of structural engineering problems. The first part of this manual presents fundamental examples in which numerical solutions by FINAS are compared with some analytical reference solutions, and the second part of this manual presents more complex examples intended for practical application. All the input data images and principal results for each problem are included in this manual for beginners' convenience. All the analyses are performed by using the FINAS Version 13.0. (author)

  19. Peace Corps Aquaculture Training Manual. Training Manual T0057.

    Science.gov (United States)

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

  20. Development and Evaluation of a Confidence-Weighting Computerized Adaptive Testing

    Science.gov (United States)

    Yen, Yung-Chin; Ho, Rong-Guey; Chen, Li-Ju; Chou, Kun-Yi; Chen, Yan-Lin

    2010-01-01

    The purpose of this study was to examine whether the efficiency, precision, and validity of computerized adaptive testing (CAT) could be improved by assessing confidence differences in knowledge that examinees possessed. We proposed a novel polytomous CAT model called the confidence-weighting computerized adaptive testing (CWCAT), which combined a…

  1. Salinas. Theory Manual Version 2.8

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Garth M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walsh, Timothy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bhardwaj, Manoj K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2009-02-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, Users Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  2. We will be champions: Leaders' confidence in 'us' inspires team members' team confidence and performance.

    Science.gov (United States)

    Fransen, K; Steffens, N K; Haslam, S A; Vanbeselaere, N; Vande Broek, G; Boen, F

    2016-12-01

    The present research examines the impact of leaders' confidence in their team on the team confidence and performance of their teammates. In an experiment involving newly assembled soccer teams, we manipulated the team confidence expressed by the team leader (high vs neutral vs low) and assessed team members' responses and performance as they unfolded during a competition (i.e., in a first baseline session and a second test session). Our findings pointed to team confidence contagion such that when the leader had expressed high (rather than neutral or low) team confidence, team members perceived their team to be more efficacious and were more confident in the team's ability to win. Moreover, leaders' team confidence affected individual and team performance such that teams led by a highly confident leader performed better than those led by a less confident leader. Finally, the results supported a hypothesized mediational model in showing that the effect of leaders' confidence on team members' team confidence and performance was mediated by the leader's perceived identity leadership and members' team identification. In conclusion, the findings of this experiment suggest that leaders' team confidence can enhance members' team confidence and performance by fostering members' identification with the team. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  3. Communication confidence in persons with aphasia.

    Science.gov (United States)

    Babbitt, Edna M; Cherney, Leora R

    2010-01-01

    Communication confidence is a construct that has not been explored in the aphasia literature. Recently, national and international organizations have endorsed broader assessment methods that address quality of life and include participation, activity, and impairment domains as well as psychosocial areas. Individuals with aphasia encounter difficulties in all these areas on a daily basis in living with a communication disorder. Improvements are often reflected in narratives that are not typically included in standard assessments. This article illustrates how a new instrument measuring communication confidence might fit into a broad assessment framework and discusses the interaction of communication confidence, autonomy, and self-determination for individuals living with aphasia.

  4. Confidence building in implementation of geological disposal

    International Nuclear Information System (INIS)

    Umeki, Hiroyuki

    2004-01-01

    Long-term safety of the disposal system should be demonstrated to the satisfaction of the stakeholders. Convincing arguments are therefore required that instil in the stakeholders confidence in the safety of a particular concept for the siting and design of a geological disposal, given the uncertainties that inevitably exist in its a priori description and in its evolution. The step-wise approach associated with making safety case at each stage is a key to building confidence in the repository development programme. This paper discusses aspects and issues on confidence building in the implementation of HLW disposal in Japan. (author)

  5. Confidence rating of marine eutrophication assessments

    DEFF Research Database (Denmark)

    Murray, Ciarán; Andersen, Jesper Harbo; Kaartokallio, Hermanni

    2011-01-01

    of the 'value' of the indicators on which the primary assessment is made. Such secondary assessment of confidence represents a first step towards linking status classification with information regarding their accuracy and precision and ultimately a tool for improving or targeting actions to improve the health......This report presents the development of a methodology for assessing confidence in eutrophication status classifications. The method can be considered as a secondary assessment, supporting the primary assessment of eutrophication status. The confidence assessment is based on a transparent scoring...

  6. SHARP User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Thomas, J. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States); Solberg, Jerome [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-31

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  7. SHARP User Manual

    International Nuclear Information System (INIS)

    Yu, Y. Q.; Shemon, E. R.; Thomas, J. W.; Mahadevan, Vijay S.; Rahaman, Ronald O.; Solberg, Jerome

    2016-01-01

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  8. An Exact Confidence Region in Multivariate Calibration

    OpenAIRE

    Mathew, Thomas; Kasala, Subramanyam

    1994-01-01

    In the multivariate calibration problem using a multivariate linear model, an exact confidence region is constructed. It is shown that the region is always nonempty and is invariant under nonsingular transformations.

  9. Weighting Mean and Variability during Confidence Judgments

    Science.gov (United States)

    de Gardelle, Vincent; Mamassian, Pascal

    2015-01-01

    Humans can not only perform some visual tasks with great precision, they can also judge how good they are in these tasks. However, it remains unclear how observers produce such metacognitive evaluations, and how these evaluations might be dissociated from the performance in the visual task. Here, we hypothesized that some stimulus variables could affect confidence judgments above and beyond their impact on performance. In a motion categorization task on moving dots, we manipulated the mean and the variance of the motion directions, to obtain a low-mean low-variance condition and a high-mean high-variance condition with matched performances. Critically, in terms of confidence, observers were not indifferent between these two conditions. Observers exhibited marked preferences, which were heterogeneous across individuals, but stable within each observer when assessed one week later. Thus, confidence and performance are dissociable and observers’ confidence judgments put different weights on the stimulus variables that limit performance. PMID:25793275

  10. Confidence bands for inverse regression models

    International Nuclear Information System (INIS)

    Birke, Melanie; Bissantz, Nicolai; Holzmann, Hajo

    2010-01-01

    We construct uniform confidence bands for the regression function in inverse, homoscedastic regression models with convolution-type operators. Here, the convolution is between two non-periodic functions on the whole real line rather than between two periodic functions on a compact interval, since the former situation arguably arises more often in applications. First, following Bickel and Rosenblatt (1973 Ann. Stat. 1 1071–95) we construct asymptotic confidence bands which are based on strong approximations and on a limit theorem for the supremum of a stationary Gaussian process. Further, we propose bootstrap confidence bands based on the residual bootstrap and prove consistency of the bootstrap procedure. A simulation study shows that the bootstrap confidence bands perform reasonably well for moderate sample sizes. Finally, we apply our method to data from a gel electrophoresis experiment with genetically engineered neuronal receptor subunits incubated with rat brain extract

  11. Distinguishing highly confident accurate and inaccurate memory: insights about relevant and irrelevant influences on memory confidence

    OpenAIRE

    Chua, Elizabeth F.; Hannula, Deborah E.; Ranganath, Charan

    2012-01-01

    It is generally believed that accuracy and confidence in one’s memory are related, but there are many instances when they diverge. Accordingly, it is important to disentangle the factors which contribute to memory accuracy and confidence, especially those factors that contribute to confidence, but not accuracy. We used eye movements to separately measure fluent cue processing, the target recognition experience, and relative evidence assessment on recognition confidence and accuracy. Eye movem...

  12. How do regulators measure public confidence?

    International Nuclear Information System (INIS)

    Schmitt, A.; Besenyei, E.

    2006-01-01

    The conclusions and recommendations of this session can be summarized this way. - There are some important elements of confidence: visibility, satisfaction, credibility and reputation. The latter can consist of trust, positive image and knowledge of the role the organisation plays. A good reputation is hard to achieve but easy to lose. - There is a need to define what public confidence is and what to measure. The difficulty is that confidence is a matter of perception of the public, so what we try to measure is the perception. - It is controversial how to take into account the results of confidence measurement because of the influence of the context. It is not an exact science, results should be examined cautiously and surveys should be conducted frequently, at least every two years. - Different experiences were explained: - Quantitative surveys - among the general public or more specific groups like the media; - Qualitative research - with test groups and small panels; - Semi-quantitative studies - among stakeholders who have regular contracts with the regulatory body. It is not clear if the results should be shared with the public or just with other authorities and governmental organisations. - Efforts are needed to increase visibility, which is a prerequisite for confidence. - A practical example of organizing an emergency exercise and an information campaign without taking into account the real concerns of the people was given to show how public confidence can be decreased. - We learned about a new method - the so-called socio-drama - which addresses another issue also connected to confidence - the notion of understanding between stakeholders around a nuclear site. It is another way of looking at confidence in a more restricted group. (authors)

  13. Confidence in leadership among the newly qualified.

    Science.gov (United States)

    Bayliss-Pratt, Lisa; Morley, Mary; Bagley, Liz; Alderson, Steven

    2013-10-23

    The Francis report highlighted the importance of strong leadership from health professionals but it is unclear how prepared those who are newly qualified feel to take on a leadership role. We aimed to assess the confidence of newly qualified health professionals working in the West Midlands in the different competencies of the NHS Leadership Framework. Most respondents felt confident in their abilities to demonstrate personal qualities and work with others, but less so at managing or improving services or setting direction.

  14. [Sources of leader's confidence in organizations].

    Science.gov (United States)

    Ikeda, Hiroshi; Furukawa, Hisataka

    2006-04-01

    The purpose of this study was to examine the sources of confidence that organization leaders had. As potential sources of the confidence, we focused on fulfillment of expectations made by self and others, reflection on good as well as bad job experiences, and awareness of job experiences in terms of commonality, differentiation, and multiple viewpoints. A questionnaire was administered to 170 managers of Japanese companies. Results were as follows: First, confidence in leaders was more strongly related to fulfillment of expectations made by self and others than reflection on and awareness of job experiences. Second, the confidence was weakly related to internal processing of job experiences, in the form of commonality awareness and reflection on good job experiences. And finally, years of managerial experiences had almost no relation to the confidence. These findings suggested that confidence in leaders was directly acquired from fulfillment of expectations made by self and others, rather than indirectly through internal processing of job experiences. Implications of the findings for leadership training were also discussed.

  15. Regional Test Center Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burnham, Laurie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Christian Birk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    The U.S. DOE Regional Test Center for Solar Technologies program was established to validate photovoltaic (PV) technologies installed in a range of different climates. The program is funded by the Energy Department's SunShot Initiative. The initiative seeks to make solar energy cost competitive with other forms of electricity by the end of the decade. Sandia National Laboratory currently manages four different sites across the country. The National Renewable Energy Laboratory manages a fifth site in Colorado. The entire PV portfolio currently includes 20 industry partners and almost 500 kW of installed systems. The program follows a defined process that outlines tasks, milestones, agreements, and deliverables. The process is broken out into four main parts: 1) planning and design, 2) installation, 3) operations, and 4) decommissioning. This operations manual defines the various elements of each part.

  16. Replication, falsification, and the crisis of confidence in social psychology.

    Science.gov (United States)

    Earp, Brian D; Trafimow, David

    2015-01-01

    The (latest) crisis in confidence in social psychology has generated much heated discussion about the importance of replication, including how it should be carried out as well as interpreted by scholars in the field. For example, what does it mean if a replication attempt "fails"-does it mean that the original results, or the theory that predicted them, have been falsified? And how should "failed" replications affect our belief in the validity of the original research? In this paper, we consider the replication debate from a historical and philosophical perspective, and provide a conceptual analysis of both replication and falsification as they pertain to this important discussion. Along the way, we highlight the importance of auxiliary assumptions (for both testing theories and attempting replications), and introduce a Bayesian framework for assessing "failed" replications in terms of how they should affect our confidence in original findings.

  17. Replication, falsification, and the crisis of confidence in social psychology

    Science.gov (United States)

    Earp, Brian D.; Trafimow, David

    2015-01-01

    The (latest) crisis in confidence in social psychology has generated much heated discussion about the importance of replication, including how it should be carried out as well as interpreted by scholars in the field. For example, what does it mean if a replication attempt “fails”—does it mean that the original results, or the theory that predicted them, have been falsified? And how should “failed” replications affect our belief in the validity of the original research? In this paper, we consider the replication debate from a historical and philosophical perspective, and provide a conceptual analysis of both replication and falsification as they pertain to this important discussion. Along the way, we highlight the importance of auxiliary assumptions (for both testing theories and attempting replications), and introduce a Bayesian framework for assessing “failed” replications in terms of how they should affect our confidence in original findings. PMID:26042061

  18. Aircraft operations management manual

    Science.gov (United States)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  19. EML procedures manual

    International Nuclear Information System (INIS)

    Volchok, H.L.; de Planque, G.

    1982-01-01

    This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

  20. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  1. Nuclear material operations manuals

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1979-06-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  2. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.; Gassman, L.D.

    1978-04-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations--management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of ''play-scripts'' in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  3. Increasing Product Confidence-Shifting Paradigms.

    Science.gov (United States)

    Phillips, Marla; Kashyap, Vishal; Cheung, Mee-Shew

    2015-01-01

    Leaders in the pharmaceutical, medical device, and food industries expressed a unilateral concern over product confidence throughout the total product lifecycle, an unsettling fact for these leaders to manage given that their products affect the lives of millions of people each year. Fueled by the heparin incident of intentional adulteration in 2008, initial efforts for increasing product confidence were focused on improving the confidence of incoming materials, with a belief that supplier performance must be the root cause. As in the heparin case, concern over supplier performance extended deep into the supply chain to include suppliers of the suppliers-which is often a blind spot for pharmaceutical, device, and food manufacturers. Resolved to address the perceived lack of supplier performance, these U.S. Food and Drug Administration (FDA)-regulated industries began to adopt the supplier relationship management strategy, developed by the automotive industry, that emphasizes "management" of suppliers for the betterment of the manufacturers. Current product and supplier management strategies, however, have not led to a significant improvement in product confidence. As a result of the enduring concern by industry leaders over the lack of product confidence, Xavier University launched the Integrity of Supply Initiative in 2012 with a team of industry leaders and FDA officials. Through a methodical research approach, data generated by the pharmaceutical, medical device, and food manufacturers surprisingly pointed to themselves as a source of the lack of product confidence, and revealed that manufacturers either unknowingly increase the potential for error or can control/prevent many aspects of product confidence failure. It is only through this paradigm shift that manufacturers can work collaboratively with their suppliers as equal partners, instead of viewing their suppliers as "lesser" entities needing to be controlled. The basis of this shift provides manufacturers

  4. MANUAL LOGIC CONTROLLER (MLC)

    OpenAIRE

    Claude Ziad Bayeh

    2015-01-01

    The “Manual Logic Controller” also called MLC, is an electronic circuit invented and designed by the author in 2008, in order to replace the well known PLC (Programmable Logic Controller) in many applications for its advantages and its low cost of fabrication. The function of the MLC is somewhat similar to the well known PLC, but instead of doing it by inserting a written program into the PLC using a computer or specific software inside the PLC, it will be manually programmed in a manner to h...

  5. Beyond the Manual Channel

    DEFF Research Database (Denmark)

    , the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the fourth time, the workshop had sign language corpora as its main topic. This time, the focus was on any aspect beyond...... the manual channel. Not surprisingly, most papers deal with non-manuals on the face. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

  6. Radar and ARPA manual

    CERN Document Server

    Bole, A G

    2013-01-01

    Radar and ARPA Manual focuses on the theoretical and practical aspects of electronic navigation. The manual first discusses basic radar principles, including principles of range and bearing measurements and picture orientation and presentation. The text then looks at the operational principles of radar systems. Function of units; aerial, receiver, and display principles; transmitter principles; and sitting of units on board ships are discussed. The book also describes target detection, Automatic Radar Plotting Aids (ARPA), and operational controls of radar systems, and then discusses radar plo

  7. TRUBA User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Tereshchenko, M. A.; Castejon, F.; Cappa, A.

    2008-04-25

    The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs.

  8. TRUBA User Manual

    International Nuclear Information System (INIS)

    Tereshchenko, M. A.; Castejon, F.; Cappa, A.

    2008-01-01

    The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs

  9. Netbooks The Missing Manual

    CERN Document Server

    Biersdorfer, J

    2009-01-01

    Netbooks are the hot new thing in PCs -- small, inexpensive laptops designed for web browsing, email, and working with web-based programs. But chances are you don't know how to choose a netbook, let alone use one. Not to worry: with this Missing Manual, you'll learn which netbook is right for you and how to set it up and use it for everything from spreadsheets for work to hobbies like gaming and photo sharing. Netbooks: The Missing Manual provides easy-to-follow instructions and lots of advice to help you: Learn the basics for using a Windows- or Linux-based netbookConnect speakers, printe

  10. Security electronics circuits manual

    CERN Document Server

    MARSTON, R M

    1998-01-01

    Security Electronics Circuits Manual is an invaluable guide for engineers and technicians in the security industry. It will also prove to be a useful guide for students and experimenters, as well as providing experienced amateurs and DIY enthusiasts with numerous ideas to protect their homes, businesses and properties.As with all Ray Marston's Circuits Manuals, the style is easy-to-read and non-mathematical, with the emphasis firmly on practical applications, circuits and design ideas. The ICs and other devices used in the practical circuits are modestly priced and readily available ty

  11. RELAP-7 Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Berry, Ray Alden [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zou, Ling [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Peterson, John William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Martineau, Richard Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kadioglu, Samet Yucel [Idaho National Lab. (INL), Idaho Falls, ID (United States); Andrs, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    This document summarizes the physical models and mathematical formulations used in the RELAP-7 code. In summary, the MOOSE based RELAP-7 code development is an ongoing effort. The MOOSE framework enables rapid development of the RELAP-7 code. The developmental efforts and results demonstrate that the RELAP-7 project is on a path to success. This theory manual documents the main features implemented into the RELAP-7 code. Because the code is an ongoing development effort, this RELAP-7 Theory Manual will evolve with periodic updates to keep it current with the state of the development, implementation, and model additions/revisions.

  12. Confidence-building and Canadian leadership

    Energy Technology Data Exchange (ETDEWEB)

    Cleminson, F.R. [Dept. of Foreign Affairs and International Trade, Verification, Non-Proliferation, Arms Control and Disarmament Div (IDA), Ottawa, Ontario (Canada)

    1998-07-01

    Confidence-building has come into its own as a 'tool of choice' in facilitating the non-proliferation, arms control and disarmament (NACD) agenda, whether regional or global. From the Middle East Peace Process (MEPP) to the ASEAN Intersessional Group on Confidence-Building (ARF ISG on CBMS), confidence-building has assumed a central profile in regional terms. In the Four Power Talks begun in Geneva on December 9, 1997, the United States identified confidence-building as one of two subject areas for initial discussion as part of a structured peace process between North and South Korea. Thus, with CBMs assuming such a high profile internationally, it seems prudent for Canadians to pause and take stock of the significant role which Canada has already played in the conceptual development of the process over the last two decades. Since the Helsinki accords of 1975, Canada has developed a significant expertise in this area through an unbroken series of original, basic research projects. These have contributed to defining the process internationally from concept to implementation. Today, these studies represent a solid and unique Departmental investment in basic research from which to draw in meeting Canada's current commitments to multilateral initiatives in the area of confidence-building and to provide a 'step up' in terms of future-oriented leadership. (author)

  13. Confidence Leak in Perceptual Decision Making.

    Science.gov (United States)

    Rahnev, Dobromir; Koizumi, Ai; McCurdy, Li Yan; D'Esposito, Mark; Lau, Hakwan

    2015-11-01

    People live in a continuous environment in which the visual scene changes on a slow timescale. It has been shown that to exploit such environmental stability, the brain creates a continuity field in which objects seen seconds ago influence the perception of current objects. What is unknown is whether a similar mechanism exists at the level of metacognitive representations. In three experiments, we demonstrated a robust intertask confidence leak-that is, confidence in one's response on a given task or trial influencing confidence on the following task or trial. This confidence leak could not be explained by response priming or attentional fluctuations. Better ability to modulate confidence leak predicted higher capacity for metacognition as well as greater gray matter volume in the prefrontal cortex. A model based on normative principles from Bayesian inference explained the results by postulating that observers subjectively estimate the perceptual signal strength in a stable environment. These results point to the existence of a novel metacognitive mechanism mediated by regions in the prefrontal cortex. © The Author(s) 2015.

  14. ADAM SMITH: THE INVISIBLE HAND OR CONFIDENCE

    Directory of Open Access Journals (Sweden)

    Fernando Luis, Gache

    2010-01-01

    Full Text Available In 1776 Adam Smith raised the matter that an invisible hand was the one which moved the markets to obtain its efficiency. Despite in the present paper we are going to raise the hypothesis, that this invisible hand is in fact the confidence that each person feels when he is going to do business. That in addition it is unique, because it is different from the confidence of the others and that is a variable nonlinear that essentially is ligatured to respective personal histories. For that we are going to take as its bases the paper by Leopoldo Abadía (2009, with respect to the financial economy crisis that happened in 2007-2008, to evidence the form in which confidence operates. Therefore the contribution that we hope to do with this paper is to emphasize that, the level of confidence of the different actors, is the one which really moves the markets, (therefore the economy and that the crisis of the subprime mortgages is a confidence crisis at world-wide level.

  15. Confidence-building and Canadian leadership

    International Nuclear Information System (INIS)

    Cleminson, F.R.

    1998-01-01

    Confidence-building has come into its own as a 'tool of choice' in facilitating the non-proliferation, arms control and disarmament (NACD) agenda, whether regional or global. From the Middle East Peace Process (MEPP) to the ASEAN Intersessional Group on Confidence-Building (ARF ISG on CBMS), confidence-building has assumed a central profile in regional terms. In the Four Power Talks begun in Geneva on December 9, 1997, the United States identified confidence-building as one of two subject areas for initial discussion as part of a structured peace process between North and South Korea. Thus, with CBMs assuming such a high profile internationally, it seems prudent for Canadians to pause and take stock of the significant role which Canada has already played in the conceptual development of the process over the last two decades. Since the Helsinki accords of 1975, Canada has developed a significant expertise in this area through an unbroken series of original, basic research projects. These have contributed to defining the process internationally from concept to implementation. Today, these studies represent a solid and unique Departmental investment in basic research from which to draw in meeting Canada's current commitments to multilateral initiatives in the area of confidence-building and to provide a 'step up' in terms of future-oriented leadership. (author)

  16. High confidence in falsely recognizing prototypical faces.

    Science.gov (United States)

    Sampaio, Cristina; Reinke, Victoria; Mathews, Jeffrey; Swart, Alexandra; Wallinger, Stephen

    2018-06-01

    We applied a metacognitive approach to investigate confidence in recognition of prototypical faces. Participants were presented with sets of faces constructed digitally as deviations from prototype/base faces. Participants were then tested with a simple recognition task (Experiment 1) or a multiple-choice task (Experiment 2) for old and new items plus new prototypes, and they showed a high rate of confident false alarms to the prototypes. Confidence and accuracy relationship in this face recognition paradigm was found to be positive for standard items but negative for the prototypes; thus, it was contingent on the nature of the items used. The data have implications for lineups that employ match-to-suspect strategies.

  17. Confidence building - is science the only approach

    International Nuclear Information System (INIS)

    Bragg, K.

    1990-01-01

    The Atomic Energy Control Board (AECB) has begun to develop some simplified methods to determine if it is possible to provide confidence that dose, risk and environmental criteria can be respected without undue reliance on detailed scientific models. The progress to date will be outlined and the merits of this new approach will be compared to the more complex, traditional approach. Stress will be given to generating confidence in both technical and non-technical communities as well as the need to enhance communication between them. 3 refs., 1 tab

  18. Self Confidence Spillovers and Motivated Beliefs

    DEFF Research Database (Denmark)

    Banerjee, Ritwik; Gupta, Nabanita Datta; Villeval, Marie Claire

    that success when competing in a task increases the performers’ self-confidence and competitiveness in the subsequent task. We also find that such spillovers affect the self-confidence of low-status individuals more than that of high-status individuals. Receiving good news under Affirmative Action, however......Is success in a task used strategically by individuals to motivate their beliefs prior to taking action in a subsequent, unrelated, task? Also, is the distortion of beliefs reinforced for individuals who have lower status in society? Conducting an artefactual field experiment in India, we show...

  19. Nuclear electronics laboratory manual

    International Nuclear Information System (INIS)

    1984-05-01

    The Nuclear Electronics Laboratory Manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. The manual does not include experiments of a basic nature, such as characteristics of different active electronics components. It starts by introducing small electronics blocks, employing one or more active components. The most demanding exercises instruct a student in the design and construction of complete circuits, as used in commercial nuclear instruments. It is expected that a student who completes all the experiments in the manual should be in a position to design nuclear electronics units and also to understand the functions of advanced commercial instruments which need to be repaired or maintained. The future tasks of nuclear electronics engineers will be increasingly oriented towards designing and building the interfaces between a nuclear experiment and a computer. The manual pays tribute to this development by introducing a number of experiments which illustrate the principles and the technology of interfacing

  20. General Drafting. Technical Manual.

    Science.gov (United States)

    Department of the Army, Washington, DC.

    The manual provides instructional guidance and reference material in the principles and procedures of general drafting and constitutes the primary study text for personnel in drafting as a military occupational specialty. Included is information on drafting equipment and its use; line weights, conventions and formats; lettering; engineering charts…

  1. Manual for subject analysis

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series and also constitutes a part of the ETDE Procedures Manual. It presents the rules, guidelines and procedures to be adopted by centers submitting input to the International Nuclear Information System (INIS) or the Energy Technology Data Exchange (ETDE). It is a manual for the subject analysis part of input preparation, meaning the selection, subject classification, abstracting and subject indexing of relevant publications, and is to be used in conjunction with the Thesauruses, Subject Categories documents and the documents providing guidelines for the preparation of abstracts. The concept and structure of the new manual are intended to describe in a logical and efficient sequence all the steps comprising the subject analysis of documents to be reported to INIS or ETDE. The manual includes new chapters on preparatory analysis, subject classification, abstracting and subject indexing, as well as rules, guidelines, procedures, examples and a special chapter on guidelines and examples for subject analysis in particular subject fields. (g.t.; a.n.)

  2. Aquatic Microbiology Laboratory Manual.

    Science.gov (United States)

    Cooper, Robert C.; And Others

    This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…

  3. IAEA safeguards technical manual

    International Nuclear Information System (INIS)

    1980-02-01

    The necessity for statistical inference procedures arises because of time and cost limitations imposed on inspection activities, and also because of inherent limitations of inspection measurement instruments and techniques. This manual produces statistical concepts and techniques in the field of nuclear material control

  4. Tokai densitometer manual

    International Nuclear Information System (INIS)

    Sprinkle, J.K. Jr.; Hsue, S.T.; Junck, K.

    1987-01-01

    In 1979, the Tokai densitometer was installed at the Tokai Reprocessing Plant in Tokai, Japan. It uses a nondestructive active technique (K-edge absorption densitometry) to assay solutions for plutonium content. The original hardware was upgraded in 1984 and 1985. This manual describes the instrument's operation after the upgrade. 2 refs

  5. Political Education Manual.

    Science.gov (United States)

    League of United Latin American Citizens, Washington, DC.

    Written to help Hispanics understand the electoral process more thoroughly and to encourage them to participate more actively in the political arena, this manual begins by describing the present status of the Hispanic electorate and then explains how laws are made, how Hispanics can influence legislation, and how to organize a voter registration…

  6. Coulometer operator's manual

    International Nuclear Information System (INIS)

    Criscuolo, A.L.

    1977-07-01

    The coulometer control system automates the titration of uranium and plutonium as performed by the CMB-1 group. The system consists of a printer, microcontroller, and coulometer, all of which are controlled by an algorithm stored in the microcontroller read-only memory. This manual describes the titration procedure using the coulometer control system, its theory and maintenance

  7. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-07-25

    The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.

  8. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-09-30

    The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.

  9. ABCC publication manual

    Energy Technology Data Exchange (ETDEWEB)

    1959-01-01

    The reporting policy of the Atomic Bomb Casualty Commission is described in detail in this manual. Specific topics covered are: research project register; research publication policy; USA publication procedures; Japan publication procedures, report preparation instructions; and a glossary of institutions terms, phrases, and symbols. 15 figures. (DMC)

  10. Matematica 3. Manual.

    Science.gov (United States)

    D'Alu, Maria Jose Miranda de Sousa

    This teachers manual accompanies a mathematics textbook, written in Portuguese, for third graders. It closely follows the objectives and methodology of the major curricula used throughout the schools in the United States. The 11 chapters deal with: numeration (0-999,999); addition with and without regrouping; subtraction with and without…

  11. Manual on industrial radiography

    International Nuclear Information System (INIS)

    1981-08-01

    This manual is intended as a source of educational material to personnel seeking certification as industrial radiographers, and as a guide and reference text for educational organizations that are providng courses in industrial radiography. It covers the basic principles of x-ray and gamma radiation, radiation safety, films and film processing, welding, casting and forging, aircraft structures and components, radiographic techniques, and records

  12. Idaho Safety Manual.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This manual is intended to help teachers, administrators, and local school boards develop and institute effective safety education as a part of all vocational instruction in the public schools of Idaho. This guide is organized in 13 sections that cover the following topics: introduction to safety education, legislation, levels of responsibility,…

  13. Functional Assessment Inventory Manual.

    Science.gov (United States)

    Crewe, Nancy M.; Athelstan, Gary T.

    This manual, which provides extensive new instructions for administering the Functional Assessment Inventory (FAI), is intended to enable counselors to begin using the inventory without undergoing any special training. The first two sections deal with the need for functional assessment and issues in the development and use of the inventory. The…

  14. Manual Hydraulic Structures

    NARCIS (Netherlands)

    Molenaar, W.F.; Voorendt, M.Z.

    This manual is the result of group work and origins in Dutch lecture notes that have been used since long time. Amongst the employees of the Hydraulic Engineering Department that contributed to this work are dr.ir. S. van Baars, ir.K.G.Bezuijen, ir.G.P.Bourguignon, prof.ir.A.Glerum,

  15. SNL Abuse Testing Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Orendorff, Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lamb, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steele, Leigh Anna Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the FreedomCAR Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND2005-3123).

  16. Sexism in Parenting Manuals

    Science.gov (United States)

    DeFrain, John D.

    1977-01-01

    Parental roles, as delineated in many of the popular parenting manuals on the market, are reviewed and assessed. It is concluded that the vast majority of authors of child-rearing guides implicity or explicitly endorse the traditional roles of father as the dominant breadwinner and mother as the nurturant caretaker. (Author)

  17. Rescue Manual. Module 6.

    Science.gov (United States)

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The sixth of 10 modules contains 4 chapters: (1) industrial rescue; (2) rescue from a confined space; (3) extrication from heavy equipment; and (4) rescue operations involving elevators. Key points, an introduction, and conclusion accompany…

  18. Manually operated coded switch

    International Nuclear Information System (INIS)

    Barnette, J.H.

    1978-01-01

    The disclosure related to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made

  19. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  20. Southern Ductile Training Manual.

    Science.gov (United States)

    Alabama State Dept. of Education, Montgomery.

    This instructor's manual contains the materials required to conduct the competency-based workplace literacy program that was developed to help employees at a foundry that has evolved from a small, family-owned business into a major foundry group with several automated production systems. The workplace literacy program consists of 24 lessons in…

  1. NDS EXFOR Manual

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1979-06-01

    This manual contains the coding rules and formats and NDS internal compilation rules for the exchange format (EXFOR) for the transmission of nuclear reaction data between national and international nuclear data centres, and for the data storage and retrieval system of the IAEA Nuclear Data Section

  2. Consumer Decisions. Student Manual.

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. Div. of Vocational Education.

    This student manual covers five areas relating to consumer decisions. Titles of the five sections are Consumer Law, Consumer Decision Making, Buying a Car, Convenience Foods, and Books for Preschool Children. Each section may contain some or all of these materials: list of objectives, informative sections, questions on the information and answers,…

  3. NACS Store Planning Manual.

    Science.gov (United States)

    College Store Journal, 1979

    1979-01-01

    Topics discussed by the NACS Store Planning/Renovation Committees in this updated version of the college store renovation manual include: short- and long-range planning, financial considerations, professional planning assistance, the store's image and business character, location considerations, building requirements, space requirements, fixtures,…

  4. Default Management Manual.

    Science.gov (United States)

    Dent, Richard A.

    This manual is designed to instruct administrators of the Guaranteed Student Loan (GSL) Program in how to take every step possible to administer the program effectively and to minimize the program costs of serving the high risk student. It shows schools how to work with students throughout their time in school, create ownership of the loan(s) by…

  5. RRFC hardware operation manual

    International Nuclear Information System (INIS)

    Abhold, M.E.; Hsue, S.T.; Menlove, H.O.; Walton, G.

    1996-05-01

    The Research Reactor Fuel Counter (RRFC) system was developed to assay the 235 U content in spent Material Test Reactor (MTR) type fuel elements underwater in a spent fuel pool. RRFC assays the 235 U content using active neutron coincidence counting and also incorporates an ion chamber for gross gamma-ray measurements. This manual describes RRFC hardware, including detectors, electronics, and performance characteristics

  6. CANAL user's manual

    International Nuclear Information System (INIS)

    Faya, A.; Wolf, L.; Todreas, N.

    1979-11-01

    CANAL is a subchannel computer program for the steady-state and transient thermal hydraulic analysis of BWR fuel rod bundles. The purpose of this manual is to introduce the user into the mechanism of running the code by providing information about the input data and options

  7. AELIB user's manual

    International Nuclear Information System (INIS)

    Evans, L.E.; Klawitter, G.L.

    1981-05-01

    This report is an updatable manual for users of AELIB, the AECL Library of FORTRAN-callable routines for the CRNL CDC 6600/CYBER 170 system. It provides general advice on the use of this library and detailed information on the selection and usage of particular library routines

  8. Water Quality Monitoring Manual.

    Science.gov (United States)

    Mason, Fred J.; Houdart, Joseph F.

    This manual is designed for students involved in environmental education programs dealing with water pollution problems. By establishing a network of Environmental Monitoring Stations within the educational system, four steps toward the prevention, control, and abatement of water pollution are proposed. (1) Train students to recognize, monitor,…

  9. Validity of the Prescriber Information in the Danish National Prescription Registry

    DEFF Research Database (Denmark)

    Rasmussen, Lotte; Valentin, Julie; Gesser, Katarina Margareta

    2016-01-01

    The aim of this study was to measure the validity of the prescriber information recorded in the Danish National Prescription Registry (DNPR). The prescriber information recorded in the pharmacies' electronic dispensing system was considered to represent the prescriber information recorded...... in the DNPR. Further, the problem of validity of the prescriber information pertains only to non-electronic prescriptions, as these are manually entered into the dispensing system. The recorded prescriber information was thus validated against information from a total of 2,000 non-electronic prescriptions...... at five Danish community pharmacies. The validity of the recorded prescriber information was measured at the level of the individual prescriber and the prescriber type, respectively. The proportion of non-electronic prescriptions with incorrect registrations was 22.4% (95% Confidence Interval (CI): 20...

  10. How Confident can we be in Flood Risk Assessments?

    Science.gov (United States)

    Merz, B.

    2017-12-01

    Flood risk management should be based on risk analyses quantifying the risk and its reduction for different risk reduction strategies. However, validating risk estimates by comparing model simulations with past observations is hardly possible, since the assessment typically encompasses extreme events and their impacts that have not been observed before. Hence, risk analyses are strongly based on assumptions and expert judgement. This situation opens the door for cognitive biases, such as `illusion of certainty', `overconfidence' or `recency bias'. Such biases operate specifically in complex situations with many factors involved, when uncertainty is high and events are probabilistic, or when close learning feedback loops are missing - aspects that all apply to risk analyses. This contribution discusses how confident we can be in flood risk assessments, and reflects about more rigorous approaches towards their validation.

  11. Confident Communication: Speaking Tips for Educators.

    Science.gov (United States)

    Parker, Douglas A.

    This resource book seeks to provide the building blocks needed for public speaking while eliminating the fear factor. The book explains how educators can perfect their oratorical capabilities as well as enjoy the security, confidence, and support needed to create and deliver dynamic speeches. Following an Introduction: A Message for Teachers,…

  12. Principles of psychological confidence of NPP operators

    International Nuclear Information System (INIS)

    Alpeev, A.S.

    1994-01-01

    The problems of operator interaction with subsystems supporting his activity are discussed from the point of view of formation of his psychological confidence on the basis of the automation intellectual means capabilities. The functions of operator activity supporting subsystems, which realization will provide to decrease greatly the portion of accidents at NPPs connected with mistakes in operator actions, are derived. 6 refs

  13. Growing confidence, building skills | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    In 2012 Rashid explored the influence of think tanks on policy in Bangladesh, as well as their relationships with international donors and media. In 2014, he explored two-way student exchanges between Canadian and ... his IDRC experience “gave me the confidence to conduct high quality research in social sciences.”.

  14. Detecting Disease in Radiographs with Intuitive Confidence

    Directory of Open Access Journals (Sweden)

    Stefan Jaeger

    2015-01-01

    Full Text Available This paper argues in favor of a specific type of confidence for use in computer-aided diagnosis and disease classification, namely, sine/cosine values of angles represented by points on the unit circle. The paper shows how this confidence is motivated by Chinese medicine and how sine/cosine values are directly related with the two forces Yin and Yang. The angle for which sine and cosine are equal (45° represents the state of equilibrium between Yin and Yang, which is a state of nonduality that indicates neither normality nor abnormality in terms of disease classification. The paper claims that the proposed confidence is intuitive and can be readily understood by physicians. The paper underpins this thesis with theoretical results in neural signal processing, stating that a sine/cosine relationship between the actual input signal and the perceived (learned input is key to neural learning processes. As a practical example, the paper shows how to use the proposed confidence values to highlight manifestations of tuberculosis in frontal chest X-rays.

  15. Coefficient Omega Bootstrap Confidence Intervals: Nonnormal Distributions

    Science.gov (United States)

    Padilla, Miguel A.; Divers, Jasmin

    2013-01-01

    The performance of the normal theory bootstrap (NTB), the percentile bootstrap (PB), and the bias-corrected and accelerated (BCa) bootstrap confidence intervals (CIs) for coefficient omega was assessed through a Monte Carlo simulation under conditions not previously investigated. Of particular interests were nonnormal Likert-type and binary items.…

  16. Distinguishing highly confident accurate and inaccurate memory: insights about relevant and irrelevant influences on memory confidence.

    Science.gov (United States)

    Chua, Elizabeth F; Hannula, Deborah E; Ranganath, Charan

    2012-01-01

    It is generally believed that accuracy and confidence in one's memory are related, but there are many instances when they diverge. Accordingly it is important to disentangle the factors that contribute to memory accuracy and confidence, especially those factors that contribute to confidence, but not accuracy. We used eye movements to separately measure fluent cue processing, the target recognition experience, and relative evidence assessment on recognition confidence and accuracy. Eye movements were monitored during a face-scene associative recognition task, in which participants first saw a scene cue, followed by a forced-choice recognition test for the associated face, with confidence ratings. Eye movement indices of the target recognition experience were largely indicative of accuracy, and showed a relationship to confidence for accurate decisions. In contrast, eye movements during the scene cue raised the possibility that more fluent cue processing was related to higher confidence for both accurate and inaccurate recognition decisions. In a second experiment we manipulated cue familiarity, and therefore cue fluency. Participants showed higher confidence for cue-target associations for when the cue was more familiar, especially for incorrect responses. These results suggest that over-reliance on cue familiarity and under-reliance on the target recognition experience may lead to erroneous confidence.

  17. Structural Equation Model to Validate: Mathematics-Computer Interaction, Computer Confidence, Mathematics Commitment, Mathematics Motivation and Mathematics Confidence

    Science.gov (United States)

    Garcia-Santillán, Arturo; Moreno-Garcia, Elena; Escalera-Chávez, Milka E.; Rojas-Kramer, Carlos A.; Pozos-Texon, Felipe

    2016-01-01

    Most mathematics students show a definite tendency toward an attitudinal deficiency, which can be primarily understood as intolerance to the matter, affecting their scholar performance adversely. In addition, information and communication technologies have been gradually included within the process of teaching mathematics. Such adoption of…

  18. Validation of CERBRRS against Gentilly-2 station data

    International Nuclear Information System (INIS)

    Varin, E.; Mao, J.; Kaveh, S.; Baudouin, A.

    2008-01-01

    CERBRRS models the CANDU 6 reactor regulating system (RRS) in CERBERUS transient core calculations. The validation of CERBRRS described here is performed against Gentilly-2 reactor data. The present validation focuses on the liquid zone controller (LZC) modelling, specifically the LZC fill rates. Two core transient measurements were compared to CERBRRS results: a shutdown system manual trip and the 1995 adjuster bank test. The standard CERBRRS model is found to produce a slower fill rate than observed at G2 in the SDS1 trip test. A modified LZC model was developed to reproduce the SDS1 trip test results, and compared to the 1995 adjuster bank test data. The CERBRRS results compared to the measurements show good agreement of the average LZC fill level, which is a key parameter in the RRS logic. These comparisons against Gentilly-2 station data also provide additional confidence in the overall performance of the CERBRRS. (author)

  19. Building Public Confidence in Nuclear Activities

    International Nuclear Information System (INIS)

    Isaacs, T

    2002-01-01

    Achieving public acceptance has become a central issue in discussions regarding the future of nuclear power and associated nuclear activities. Effective public communication and public participation are often put forward as the key building blocks in garnering public acceptance. A recent international workshop in Finland provided insights into other features that might also be important to building and sustaining public confidence in nuclear activities. The workshop was held in Finland in close cooperation with Finnish stakeholders. This was most appropriate because of the recent successes in achieving positive decisions at the municipal, governmental, and Parliamentary levels, allowing the Finnish high-level radioactive waste repository program to proceed, including the identification and approval of a proposed candidate repository site. Much of the workshop discussion appropriately focused on the roles of public participation and public communications in building public confidence. It was clear that well constructed and implemented programs of public involvement and communication and a sense of fairness were essential in building the extent of public confidence needed to allow the repository program in Finland to proceed. It was also clear that there were a number of other elements beyond public involvement that contributed substantially to the success in Finland to date. And, in fact, it appeared that these other factors were also necessary to achieving the Finnish public acceptance. In other words, successful public participation and communication were necessary but not sufficient. What else was important? Culture, politics, and history vary from country to country, providing differing contexts for establishing and maintaining public confidence. What works in one country will not necessarily be effective in another. Nonetheless, there appear to be certain elements that might be common to programs that are successful in sustaining public confidence and some of

  20. Building Public Confidence in Nuclear Activities

    International Nuclear Information System (INIS)

    Isaacs, T

    2002-01-01

    Achieving public acceptance has become a central issue in discussions regarding the future of nuclear power and associated nuclear activities. Effective public communication and public participation are often put forward as the key building blocks in garnering public acceptance. A recent international workshop in Finland provided insights into other features that might also be important to building and sustaining public confidence in nuclear activities. The workshop was held in Finland in close cooperation with Finnish stakeholders. This was most appropriate because of the recent successes in achieving positive decisions at the municipal, governmental, and Parliamentary levels, allowing the Finnish high-level radioactive waste repository program to proceed, including the identification and approval of a proposed candidate repository site Much of the workshop discussion appropriately focused on the roles of public participation and public communications in building public confidence. It was clear that well constructed and implemented programs of public involvement and communication and a sense of fairness were essential in building the extent of public confidence needed to allow the repository program in Finland to proceed. It was also clear that there were a number of other elements beyond public involvement that contributed substantially to the success in Finland to date. And, in fact, it appeared that these other factors were also necessary to achieving the Finnish public acceptance. In other words, successful public participation and communication were necessary but not sufficient. What else was important? Culture, politics, and history vary from country to country, providing differing contexts for establishing and maintaining public confidence. What works in one country will not necessarily be effective in another. Nonetheless, there appear to be certain elements that might be common to programs that are successful in sustaining public confidence, and some of

  1. Missouri Highway Safety Manual Recalibration

    Science.gov (United States)

    2018-05-01

    The Highway Safety Manual (HSM) is a national manual for analyzing the highway safety of various facilities, including rural roads, urban arterials, freeways, and intersections. The HSM was first published in 2010, and a 2014 supplement addressed fre...

  2. Developing a Pupil Transportation Manual.

    Science.gov (United States)

    Douglas, Dave

    1987-01-01

    District-level pupil transportation manuals that contain clear, concise information about objectives, policies, and regulations are a must. These manuals should also specify procedures concerning evaluation processes, personnel recruitment and selection, and the driver training program. (MLH)

  3. Development of a SCAT data management manual

    International Nuclear Information System (INIS)

    Lamarche, A.; Owens, E.H.

    2005-01-01

    The Shoreline Cleanup Assessment Technique (SCAT) is a commonly used method in North America to document oiling conditions in the aftermath of an oil spill. The data generated by SCAT can support all aspects of the process needed to develop and apply shoreline treatment methods such as planning treatment strategies, selecting treatment methods, providing detailed instructions to response personnel and evaluating the response effort. In order to be effective, SCAT data must be validated, entered within computerized systems, and transformed into support documents such as maps, tables and reports. This paper describes the development of a guidance manual for SCAT data coordinators and spill response managers that use the results of SCAT data. Guidance is presented for emergency procedures that enable the generation of minimal, but adequate, SCAT data management services. The creation of the manual involved the development of formal descriptions of the role, responsibilities and abilities of the SCAT data management team. The manual provides solution to several data processing issues, including those related to the presence of multiple parallel bands of oil within a segment of shoreline. Summary tables were created to report the length of oiled shoreline by oiling category and to present surface oiling characteristics in overview maps. The manual also includes details on how SCAT data is used for response planning, decision making and to support operations. 12 refs., 7 tabs., 8 figs

  4. Large Hadron Collider manual

    CERN Document Server

    Lavender, Gemma

    2018-01-01

    What is the universe made of? How did it start? This Manual tells the story of how physicists are seeking answers to these questions using the world’s largest particle smasher – the Large Hadron Collider – at the CERN laboratory on the Franco-Swiss border. Beginning with the first tentative steps taken to build the machine, the digestible text, supported by color photographs of the hardware involved, along with annotated schematic diagrams of the physics experiments, covers the particle accelerator’s greatest discoveries – from both the perspective of the writer and the scientists who work there. The Large Hadron Collider Manual is a full, comprehensive guide to the most famous, record-breaking physics experiment in the world, which continues to capture the public imagination as it provides new insight into the fundamental laws of nature.

  5. NDS EXFOR manual

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1996-01-01

    EXFOR is the agreed exchange format for the transmission of nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. The IAEA Nuclear Data Section uses the EXFOR system not only for the center-to-center data exchange but also as its data storage and retrieval system. This NDS EXFOR MANUAL therefore contains the agreed EXFOR coding rules and format, supplemented by NDS internal compilation rules. The EXFOR system and the EXFOR nuclear data library with several million data records originate from the cooperation of an increasing number of data centers whose names and addresses can be found inside the Manual. Their contributions and cooperative efforts are gratefully acknowledged. (author)

  6. Radiation protection manual

    International Nuclear Information System (INIS)

    Spang, A.

    1983-01-01

    According to the Radiation Protection Ordinance, radiation protection experts directing or supervising the handling of radioactive materials must have expert knowledge. The concept of expert knowledge has been clearly defined by the Fachverband e.V. in a catalogue of instruction goals. The manual follows the principles of this catalogue; it presents the expert knowledge required in a total of 15 subject groups. There is an index which helps the reader to find his specific subject group and the knowledge required of him in this subject group. However, the manual gives only an outline of the subject matter in many instances and should therefore not be regarded as a textbook in the proper sense. (orig./HP) [de

  7. REBA experimenters' manual

    International Nuclear Information System (INIS)

    Schuch, R.L.

    1977-04-01

    The REBA is a high-energy, pulsed electron beam or bremsstrahlung x-ray generator whose operational purpose is to provide an energy source of short duration for conducting experiments, primarily to determine material responses to rapid surface and in-depth deposition of energy. The purpose of this manual is to serve as a basic source of information for prospective users of REBA. Included is a brief discussion of the design and operation of the facility as well as a summary of output characteristics for electron beam modes and environmental data for x-ray operation. The manual also contains a description of the REBA experimental facilities, including geometry of the test cell, instrumentation and data collection capabilities, and services and support available to experimenters

  8. The environmental survey manual

    International Nuclear Information System (INIS)

    1987-08-01

    The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

  9. NDS EXFOR manual

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1985-08-01

    EXFOR is the agreed exchange format for the transmission of nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. The IAEA Nuclear Data Section uses the EXFOR system not only for the center-to-center data exchange but also as its data storage and retrieval system. This NDS EXFOR MANUAL therefore contains the agreed EXFOR coding rules and format, supplemented by NDS internal compilation rules. The EXFOR system and the EXFOR nuclear data library with several million data records originate from the cooperation of an increasing number of data centers whose names and addresses can be found inside the Manual. Their contributions and cooperative efforts are gratefully acknowledged. (author)

  10. MINTEQ user's manual

    International Nuclear Information System (INIS)

    Peterson, S.R.; Hostetler, C.J.; Deutsch, W.J.; Cowan, C.E.

    1987-02-01

    This manual will aid the user in applying the MINTEQ geochemical computer code to model aqueous solutions and the interactions of aqueous solutions with hypothesized assemblages of solid phases. The manual will provide a basic understanding of how the MINTEQ computer code operates and the important principles that are incorporated into the code and instruct a user of the MINTEQ code on how to create input files to simulate a variety of geochemical problems. Chapters 2 through 8 are for the user who has some experience with or wishes to review the principles important to geochemical computer codes. These chapters include information on the methodology MINTEQ uses to incorporate these principles into the code. Chapters 9 through 11 are for the user who wants to know how to create input data files to model various types of problems. 35 refs., 2 figs., 5 tabs

  11. Auxiliary mine ventilation manual

    International Nuclear Information System (INIS)

    Workplace Safety North

    2010-01-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  12. Auxiliary mine ventilation manual

    Energy Technology Data Exchange (ETDEWEB)

    Workplace Safety North

    2010-07-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  13. Laboratory biosafety manual

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    This book is in three sections; basic standards of laboratory design and equipment; procedures for safe laboratory practice; and the selection and use of essential biosafety equipment. The intention is that the guidance given in the book should have a broad basis and international application, and that it should be a source from which manuals applicable to local and special conditions can be usefully derived.

  14. Oil trading manual

    International Nuclear Information System (INIS)

    Long, D.

    1995-01-01

    This manual provides basic information on all aspects of oil trading. Topics reviewed in Part 1 include physical characteristics and refining and oil pricing arrangements. Part 2 on instruments and markets contains chapters on crude oil markets, product markets, forward and futures contracts, forward paper markets, oil future exchanges, options, swaps and long term oil markets. Part 3 deals with administration and has chapters on operations and logistics, credit control, accounting, taxation of oil trading, contracts and legal and regulatory issues. (UK)

  15. Manual of Radiation Protection

    International Nuclear Information System (INIS)

    Gambini, D.J.; Granier, R.; Boisserie, G.

    1992-01-01

    This manual explains the principles and practice of radiation protection for those whose work in research, in the field of medicine or in the industry requires the use of radiation sources. It provides the information radiation users need to protect themselves and others and to understand and comply with international recommendations, regulations and legislation regarding the use of radionuclides and radiation machines. It is designed to teach a wide audience of doctors, biologists, research scientists, technicians, engineers, students and others

  16. IAC user manual

    Science.gov (United States)

    Vos, R. G.; Beste, D. L.; Gregg, J.

    1984-01-01

    The User Manual for the Integrated Analysis Capability (IAC) Level 1 system is presented. The IAC system currently supports the thermal, structures, controls and system dynamics technologies, and its development is influenced by the requirements for design/analysis of large space systems. The system has many features which make it applicable to general problems in engineering, and to management of data and software. Information includes basic IAC operation, executive commands, modules, solution paths, data organization and storage, IAC utilities, and module implementation.

  17. Challenge for reconstruction of public confidence

    International Nuclear Information System (INIS)

    Matsuura, S.

    2001-01-01

    Past incidents and scandals that have had a large influence on damaging public confidence in nuclear energy safety are presented. Radiation leak on nuclear-powered ship 'Mutsu' (1974), the T.M.I. incident in 1979, Chernobyl accident (1986), the sodium leak at the Monju reactor (1995), fire and explosion at a low level waste asphalt solidification facility (1997), J.C.O. incident (Tokai- MURA, 1999), are so many examples that have created feelings of distrust and anxiety in society. In order to restore public confidence there is no other course but to be prepared for difficulty and work honestly to our fullest ability, with all steps made openly and accountably. (N.C.)

  18. Tables of Confidence Limits for Proportions

    Science.gov (United States)

    1990-09-01

    0.972 180 49 0.319 0.332 0,357 175 165 0.964 0.969 0.976 ISO 50 0.325 0.338 0.363 175 166 0.969 0.973 0.980 180 51 0.331 0.344 0.368 175 167 0.973 0.977...0.528 180 18 0.135 0 145 0.164 180 19 0.141 0.151 0.171 ISO 80 0.495 0,508 0.534 347 UPPER CONFIDENCE LIMIT FOR PROPORTIONS CONFIDENCE LEVEL...500 409 0.8401 0.8459 0.8565 500 355 0.7364 0.7434 0.7564 500 356 0.7383 0.7453 0.7582 500 410 0.8420 0.8478 0 8583 500 357 0.7402 0.7472 0.7602 500

  19. Social media sentiment and consumer confidence

    OpenAIRE

    Daas, Piet J.H.; Puts, Marco J.H.

    2014-01-01

    Changes in the sentiment of Dutch public social media messages were compared with changes in monthly consumer confidence over a period of three-and-a-half years, revealing that both were highly correlated (up to r = 0.9) and that both series cointegrated. This phenomenon is predominantly affected by changes in the sentiment of all Dutch public Facebook messages. The inclusion of various selections of public Twitter messages improved this association and the response to changes in sentiment. G...

  20. Program Management System manual

    International Nuclear Information System (INIS)

    1986-01-01

    The Program Management System (PMS), as detailed in this manual, consists of all the plans, policies, procedure, systems, and processes that, taken together, serve as a mechanism for managing the various subprograms and program elements in a cohesive, cost-effective manner. The PMS is consistent with the requirements of the Nuclear Waste Policy Act of 1982 and the ''Mission Plan for the Civilian Radioactive Waste Management Program'' (DOE/RW-0005). It is based on, but goes beyond, the Department of Energy (DOE) management policies and procedures applicable to all DOE programs by adapting these directives to the specific needs of the Civilian Radioactive Waste Management program. This PMS Manual describes the hierarchy of plans required to develop and maintain the cost, schedule, and technical baselines at the various organizational levels of the Civilian Radioactive Waste Management Program. It also establishes the management policies and procedures used in the implementation of the Program. These include requirements for internal reports, data, and other information; systems engineering management; regulatory compliance; safety; quality assurance; and institutional affairs. Although expanded versions of many of these plans, policies, and procedures are found in separate documents, they are an integral part of this manual. The PMS provides the basis for the effective management that is needed to ensure that the Civilian Radioactive Waste Management Program fulfills the mandate of the Nuclear Waste Policy Act of 1982. 5 figs., 2 tabs

  1. ETAP user's manual

    International Nuclear Information System (INIS)

    Watanabe, Norio; Higuchi, Suminori.

    1990-11-01

    The event tree analysis technique has been used in Probabilistic Safety Assessment for LWRs to delineate various accident scenarios leading to core melt or containment failure and to evaluate their frequencies. This technique often requires manual preparation of event trees with iterative process and time-consuming work in data handling. For the purpose of reducing manual efforts in event tree analysis, we developed a new software package named ETAP (Event Tree Analysis Supporting Program) for event tree analysis. ETAP is an interactive PC-based program which has the ability to construct, update, document, and quantify event trees. Because of its fast running capability to quantify event trees, use of the EATP program can make it easy to perform the sensitivity studies on a variety of system/containment performance issues. This report provides a user's manual for ETAP, which describes the structure, installation, and use of EATP. This software runs on NEC/PC-9800 or compatible PCs that have a 640 KB memory and MS-DOS 2.11 or higher. (author)

  2. Sodium safety manual

    International Nuclear Information System (INIS)

    Hayes, D.J.; Gardiner, R.L.

    1980-09-01

    The sodium safety manual is based upon more than a decade of experience with liquid sodium at Berkeley Nuclear Laboratories (BNL). It draws particularly from the expertise and experience developed in the course of research work into sodium fires and sodium water reactions. It draws also on information obtained from the UKAEA and other sodium users. Many of the broad principles will apply to other Establishments but much of the detail is specific to BNL and as a consequence its application at other sites may well be limited. Accidents with sodium are at best unpleasant and at worst lethal in an extremely painful way. The object of this manual is to help prevent sodium accidents. It is not intended to give detailed advice on specific precautions for particular situations, but rather to set out the overall strategy which will ensure that sodium activities will be pursued safely. More detail is generally conveyed to staff by the use of local instructions known as Sodium Working Procedures (SWP's) which are not reproduced in this manual although a list of current SWP's is included. Much attention is properly given to the safe design and operation of larger facilities; nevertheless evidence suggests that sodium accidents most frequently occur in small-scale work particularly in operations associated with sodium cleaning and special care is needed in all such cases. (U.K.)

  3. OASIS User Manual

    CERN Document Server

    Bojtar, L

    2009-01-01

    The OASIS system has been operational for years now. After a long development the project has reached a state where the number of features it provides exceeds largely what most of its users knows about. The author felt it was time to write a user manual explaining all the functionality of the viewer application. This document is a user manual, concentrating on the functionality of the viewer from the user’s point of view. There are already documents available on the project’s web site about the technical aspects at http://project-oasis.web.cern.ch/project-oasis/presentations.htm . There was an attempt to produce a tutorial on the viewer, but it didn’t get much further than the table of contents, that however is well thought. The structure of this user manual follows the same principle, the basic and most often used features are grouped together. Advanced or less often used features are described in a separate chapter. There is a second organizational principle, features belong to different levels: chann...

  4. Confidence, Visual Research, and the Aesthetic Function

    Directory of Open Access Journals (Sweden)

    Stan Ruecker

    2007-05-01

    Full Text Available The goal of this article is to identify and describe one of the primary purposes of aesthetic quality in the design of computer interfaces and visualization tools. We suggest that humanists can derive advantages in visual research by acknowledging by their efforts to advance aesthetic quality that a significant function of aesthetics in this context is to inspire the user’s confidence. This confidence typically serves to create a sense of trust in the provider of the interface or tool. In turn, this increased trust may result in an increased willingness to engage with the object, on the basis that it demonstrates an attention to detail that promises to reward increased engagement. In addition to confidence, the aesthetic may also contribute to a heightened degree of satisfaction with having spent time using or investigating the object. In the realm of interface design and visualization research, we propose that these aesthetic functions have implications not only for the quality of interactions, but also for the results of the standard measures of performance and preference.

  5. Confidence-Based Learning in Investment Analysis

    Science.gov (United States)

    Serradell-Lopez, Enric; Lara-Navarra, Pablo; Castillo-Merino, David; González-González, Inés

    The aim of this study is to determine the effectiveness of using multiple choice tests in subjects related to the administration and business management. To this end we used a multiple-choice test with specific questions to verify the extent of knowledge gained and the confidence and trust in the answers. The tests were performed in a group of 200 students at the bachelor's degree in Business Administration and Management. The analysis made have been implemented in one subject of the scope of investment analysis and measured the level of knowledge gained and the degree of trust and security in the responses at two different times of the course. The measurements have been taken into account different levels of difficulty in the questions asked and the time spent by students to complete the test. The results confirm that students are generally able to obtain more knowledge along the way and get increases in the degree of trust and confidence in the answers. It is confirmed as the difficulty level of the questions set a priori by the heads of the subjects are related to levels of security and confidence in the answers. It is estimated that the improvement in the skills learned is viewed favourably by businesses and are especially important for job placement of students.

  6. SimPhospho: a software tool enabling confident phosphosite assignment.

    Science.gov (United States)

    Suni, Veronika; Suomi, Tomi; Tsubosaka, Tomoya; Imanishi, Susumu Y; Elo, Laura L; Corthals, Garry L

    2018-03-27

    Mass spectrometry combined with enrichment strategies for phosphorylated peptides has been successfully employed for two decades to identify sites of phosphorylation. However, unambiguous phosphosite assignment is considered challenging. Given that site-specific phosphorylation events function as different molecular switches, validation of phosphorylation sites is of utmost importance. In our earlier study we developed a method based on simulated phosphopeptide spectral libraries, which enables highly sensitive and accurate phosphosite assignments. To promote more widespread use of this method, we here introduce a software implementation with improved usability and performance. We present SimPhospho, a fast and user-friendly tool for accurate simulation of phosphopeptide tandem mass spectra. Simulated phosphopeptide spectral libraries are used to validate and supplement database search results, with a goal to improve reliable phosphoproteome identification and reporting. The presented program can be easily used together with the Trans-Proteomic Pipeline and integrated in a phosphoproteomics data analysis workflow. SimPhospho is available for Windows, Linux and Mac operating systems at https://sourceforge.net/projects/simphospho/. It is open source and implemented in C ++. A user's manual with detailed description of data analysis using SimPhospho as well as test data can be found as supplementary material of this article. Supplementary data are available at https://www.btk.fi/research/ computational-biomedicine/software/.

  7. Transparency as an element of public confidence

    International Nuclear Information System (INIS)

    Kim, H.K.

    2007-01-01

    In the modern society, there is increasing demands for greater transparency. It has been discussed with respect to corruption or ethics issues in social science. The need for greater openness and transparency in nuclear regulation is widely recognised as public expectations on regulator grow. It is also related to the digital and information technology that enables disclosures of every activity and information of individual and organisation, characterised by numerous 'small brothers'. Transparency has become a key word in this ubiquitous era. Transparency in regulatory activities needs to be understood in following contexts. First, transparency is one of elements to build public confidence in regulator and eventually to achieve regulatory goal of providing the public with satisfaction at nuclear safety. Transparent bases of competence, independence, ethics and integrity of working process of regulatory body would enhance public confidence. Second, activities transmitting information on nuclear safety and preparedness to be accessed are different types of transparency. Communication is an active method of transparency. With increasing use of web-sites, 'digital transparency' is also discussed as passive one. Transparency in regulatory process may be more important than that of contents. Simply providing more information is of little value and specific information may need to be protected for security reason. Third, transparency should be discussed in international, national and organizational perspectives. It has been demanded through international instruments. for each country, transparency is demanded by residents, public, NGOs, media and other stakeholders. Employees also demand more transparency in operating and regulatory organisations. Whistle-blower may appear unless they are satisfied. Fourth, pursuing transparency may cause undue social cost or adverse effects. Over-transparency may decrease public confidence and the process for transparency may also hinder

  8. Asymptotically Honest Confidence Regions for High Dimensional

    DEFF Research Database (Denmark)

    Caner, Mehmet; Kock, Anders Bredahl

    While variable selection and oracle inequalities for the estimation and prediction error have received considerable attention in the literature on high-dimensional models, very little work has been done in the area of testing and construction of confidence bands in high-dimensional models. However...... develop an oracle inequality for the conservative Lasso only assuming the existence of a certain number of moments. This is done by means of the Marcinkiewicz-Zygmund inequality which in our context provides sharper bounds than Nemirovski's inequality. As opposed to van de Geer et al. (2014) we allow...

  9. National Debate and Public Confidence in Sweden

    International Nuclear Information System (INIS)

    Lindquist, Ted

    2014-01-01

    Ted Lindquist, coordinator of the Association of Swedish Municipalities with Nuclear Facilities (KSO), closed the first day of conferences. He showed what the nuclear landscape was in Sweden, and in particular that through time there has been a rather good support from the population. He explained that the reason could be the confidence of the public in the national debate. On a more local scale, Ted Lindquist showed how overwhelmingly strong the support was in towns where the industry would like to operate long-term storage facilities

  10. Operator's manual actions in case of fire; Acciones manuales del operador en caso de incendio

    Energy Technology Data Exchange (ETDEWEB)

    Saez de Tejada Madina, P.; Perez Lobo, E. M.; Velasco Ramirez, R.; Velasco Ramirez, R.; Fernandez Ramos, P.

    2012-07-01

    Vandellos II, following the guidelines GS 01.19 of CSN and RG 1.189 rev. 2, has identified the need to consider a number of local manual actions to be performed by the staff of shift operation and need to be validated according NUREG 1852. The local manual actions include corrective and preventive actions, such as local start and shooting of bombs, checking positions ... According NUREG-1852 these actions must be validated with conditions as similar as possible to those expected, in conjunction with the operating of Vandellos II.

  11. INIS: Database manual

    International Nuclear Information System (INIS)

    2003-01-01

    This document is one in a series of publications known as the INIS Reference Series. It is intended for users of INIS (International Nuclear Information System) output data on various media (FTP file, CD-ROM, e-mail file, earlier magnetic tape, cartridge, etc.). This manual provides a description of each data element including information on contents, structure and usage as well as historical overview of additions, deletions and changes of data elements and their contents that have taken place over the years. Each record contains certain control data fields (001-009), one, two or three bibliographic levels, a set of descriptors, and zero, one or more abstracts, one in English and optionally one or more in another language. In order to facilitate the description of the system, the sequence of data elements is based on the input or, as it is internally called, worksheet format which differs from the exchange format described in the manual IAEA-INIS-7. A separate section is devoted to each data element and deviations from the exchange format are indicated whenever present. As the Record Leader and the Directory are sufficiently explained in Chapter 3.1 of IAEA-INIS-7, the contents of this manual are limited to control fields and data fields; the detailed explanations are intended to supplement the basic information given in Chapter 3.2 of IAEA-INIS-7. Bibliographic levels are used to identify component parts of a publication, i.e. chapters in a book, articles in a journal issue, conference papers in a proceedings volume. All bibliographic levels contained in a record are given in a control data field. Each bibliographic level identifier appears in the subdirectory with a pointer to its position in the record

  12. MAP user's manual copyright

    International Nuclear Information System (INIS)

    Pillsbury, R.D. Jr.

    1991-12-01

    The program MITMAP represents a set of general purpose, two- dimensional, finite element programs for the calculation of magnetic fields. It consists of the program MAP and MAP2DJ. The two programs are used to solve different electromagnetic problems, but they have a common set of subrountines for pre- and postprocessing. Originally separate programs, they have been combined to make modification easier. The manuals, however, will remain separate. The program MAP is described in this manual. MAP is applicable to the class of problems with two-dimensional-planar or axisymmetric - geometries, in which the current density and the magnetic vector potential have only a single nonvanishing component. The single component is associated with the direction that is perpendicular to the plane of the problem and is invariant with respect to that direction. Maxwell's equations can be reduced to a solver diffusion equation in terms of the single, nonvanishing component of the magnetic vector potential for planar problems and to a single component of a vector potential for planar problems and to a single component of a vector diffusion equation for axisymmetric problems. The magnetic permeability appears in the governing equation. The permeability may be a function of the magnetic flux density. In addition, any electrically conducting material present will have eddy currents induced by a time varying magnetic field. These eddy currents must be included in the solution process. This manual provides a description of the structure of the input data and output for the program. There are several example problems presented that illustrate the major program features. Appendices are included that contain a derivation of the governing equations and the application of the finite element method to the solution of the equations

  13. Modern TTL circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Modern TTL Circuits Manual provides an introduction to the basic principles of Transistor-Transistor Logic (TTL). This book outlines the major features of the 74 series of integrated circuits (ICs) and introduces the various sub-groups of the TTL family.Organized into seven chapters, this book begins with an overview of the basics of digital ICs. This text then examines the symbology and mathematics of digital logic. Other chapters consider a variety of topics, including waveform generator circuitry, clocked flip-flop and counter circuits, special counter/dividers, registers, data latches, com

  14. Manual of Decolonization

    DEFF Research Database (Denmark)

    Gigone, Fabio

    2010-01-01

    During a residency in Bethlehem, Venice-based design and research studio Salottobuono formulated a 'strategy of subversion' for Israeli settlements in the West Bank. From this comes the elegant Manual of Decolonization; a generic but detailed resource for all post-occupation scenarios. Assessing...... how evacuated and imposed structures can be transformed in collaboration with local stakeholders, the book's plans, models and projections are divided into themes like 'De-parcelling', 'Re-combining' and 'Un-roofing'; landscape, nature and materials are considered at length. The outcome is an open...

  15. CMOS circuits manual

    CERN Document Server

    Marston, R M

    1995-01-01

    CMOS Circuits Manual is a user's guide for CMOS. The book emphasizes the practical aspects of CMOS and provides circuits, tables, and graphs to further relate the fundamentals with the applications. The text first discusses the basic principles and characteristics of the CMOS devices. The succeeding chapters detail the types of CMOS IC, including simple inverter, gate and logic ICs and circuits, and complex counters and decoders. The last chapter presents a miscellaneous collection of two dozen useful CMOS circuits. The book will be useful to researchers and professionals who employ CMOS circu

  16. Coal marketing manual 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This manual provides information on the international coal market in tabulated format. Statistics are presented for the Australian coal industry, exports, currency movements, world coal production, coal and coke imports and exports. Detailed information is provided on the Australian coal industry including mine specific summaries. Pricing summaries for thermal and coking coal in 1987, coal quality standards and specifications, trends in coal prices and stocks. Imports and exports for World coal and coke, details of shipping, international ports and iron and steel production. An exporters index of Australian and overseas companies with industry and government contacts is included. 15 figs., 67 tabs.

  17. Optoelectronics circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Optoelectronics Circuits Manual covers the basic principles and characteristics of the best known types of optoelectronic devices, as well as the practical applications of many of these optoelectronic devices. The book describes LED display circuits and LED dot- and bar-graph circuits and discusses the applications of seven-segment displays, light-sensitive devices, optocouplers, and a variety of brightness control techniques. The text also tackles infrared light-beam alarms and multichannel remote control systems. The book provides practical user information and circuitry and illustrations.

  18. Timergenerator circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Timer/Generator Circuits Manual is an 11-chapter text that deals mainly with waveform generator techniques and circuits. Each chapter starts with an explanation of the basic principles of its subject followed by a wide range of practical circuit designs. This work presents a total of over 300 practical circuits, diagrams, and tables.Chapter 1 outlines the basic principles and the different types of generator. Chapters 2 to 9 deal with a specific type of waveform generator, including sine, square, triangular, sawtooth, and special waveform generators pulse. These chapters also include pulse gen

  19. Health physics instrument manual

    International Nuclear Information System (INIS)

    Gupton, E.D.

    1978-08-01

    The purpose of this manual is to provide apprentice health physics surveyors and other operating groups not directly concerned with radiation detection instruments a working knowledge of the radiation detection and measuring instruments in use at the Laboratory. The characteristics and applications of the instruments are given. Portable instruments, stationary instruments, personnel monitoring instruments, sample counters, and miscellaneous instruments are described. Also, information sheets on calibration sources, procedures, and devices are included. Gamma sources, beta sources, alpha sources, neutron sources, special sources, a gamma calibration device for badge dosimeters, and a calibration device for ionization chambers are described

  20. IMAGE User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Stehfest, E; De Waal, L; Oostenrijk, R.

    2010-09-15

    This user manual contains the basic information for running the simulation model IMAGE ('Integrated Model to Assess the Global Environment') of PBL. The motivation for this report was a substantial restructuring of the source code for IMAGE version 2.5. The document gives concise content information about the submodels, tells the user how to install the program, describes the directory structure of the run environment, shows how scenarios have to be prepared and run, and gives insight in the restart functionality.

  1. Radioanalytical methods manual

    International Nuclear Information System (INIS)

    Chiu, N.W.; Dean, J.R.

    1986-01-01

    This Radioanalytical Methods manual is comprised of 12 chapters. It includes a review of the pertinent literature up to the end of 1982 pertaining to the measurement of the radioactive species listed under the terms of the contract. Included is methodology recommended for the decompositions of soils, tailings, ores, biological samples and air filters. Detailed analytical methodology for the measurement of gross alpha, gross beta, gross gamma, uranium, radium-226, radium-228, lead-210, thorium-232, thorium-230, thorium-228, total thorium, radon-222, radon-220 and radon-219 is presented

  2. ASSERT-4 user's manual

    International Nuclear Information System (INIS)

    Judd, R.A.; Tahir, A.; Carver, M.B.; Stewart, D.G.; Thibeault, P.R.; Rowe, D.S.

    1984-09-01

    ASSERT-4 is an advanced subchannel code being developed primarily to model single- and two-phase flow and heat transfer in horizontal rod bundles. This manual is intended to facilitate the application of this code to the analysis of flow in reactor fuel channels. It contains a brief description of the thermalhydraulic model and ASSERT-4 solution scheme, and other information required by users. This other information includes a detailed discussion of input data requirements, a sample problem and solution, and information describing how to access and run ASSERT-4 on the Chalk River computers

  3. Rural Gas Program manual

    Energy Technology Data Exchange (ETDEWEB)

    1987-11-01

    The intent and purpose of this manual is to describe the various guideliness and administrative procedures associated with the Alberta Rural Gas Program and to consolidate and expand upon the legislation under which the Program has been developed. It is intended primarily for the use and information of rural gas distributors, their agents, and other private or government parties having an interest in the Rural Gas Program. Information is presented on: rural gas franchises, technical applications, contracts and tenders, determination of system capital costs for grant support, grants, Gas Alberta brokerage arrangements, insurance coverage, utility rights-of-way, and lien notes.

  4. Health and safety manual

    International Nuclear Information System (INIS)

    1980-02-01

    The manual consists of the following chapters: general policies and administration; the Environmental Health and Safety Department; the Medical Services Department: biological hazards; chemical safety; confined space entry; cryogenic safety; electrical safety; emergency plans; engineering and construction; evacuations, trenching, and shoring; fire safety; gases, flammable and compressed; guarding, mechanical; ladders and scaffolds, work surfaces; laser safety; materials handling and storage; noise; personal protective equipment; pressure safety; radiation safety, ionizing and non-ionizing; sanitation; seismic safety; training, environmental health and safety; tools, power and hand-operated; traffic and transportation; and warning signs and devices

  5. RADTRAN 6 Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  6. RADTRAN 6 technical manual.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  7. FISPACT 97: user manual

    International Nuclear Information System (INIS)

    Forrest, R.A.; Sublet, J.-Ch.

    1997-05-01

    FISPACT is the inventory code included in the European Activation System (EASY). A new version of FISPACT: FISPACT-97 has been developed and this report is the User manual for the code. It explains the use of all the code words used in the input file to specify a FISPACT run and describes how all the data files are connected. A series of appendices cover the working of the code and the physical and mathematical details. Background information on the data files and extensive examples of input files suitable for various applications are included. (Author)

  8. Timber designers' manual

    CERN Document Server

    Ozelton, E C

    2008-01-01

    This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

  9. NASCAP programmer's reference manual

    Science.gov (United States)

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-05-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  10. Percept User Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Carnes, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennon, Stephen Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    This document is the main user guide for the Sierra/Percept capabilities including the mesh_adapt and mesh_transfer tools. Basic capabilities for uniform mesh refinement (UMR) and mesh transfers are discussed. Examples are used to provide illustration. Future versions of this manual will include more advanced features such as geometry and mesh smoothing. Additionally, all the options for the mesh_adapt code will be described in detail. Capabilities for local adaptivity in the context of offline adaptivity will also be included. This page intentionally left blank.

  11. Optoelectronics circuits manual

    CERN Document Server

    Marston, R M

    1999-01-01

    This manual is a useful single-volume guide specifically aimed at the practical design engineer, technician, and experimenter, as well as the electronics student and amateur. It deals with the subject in an easy to read, down to earth, and non-mathematical yet comprehensive manner, explaining the basic principles and characteristics of the best known devices, and presenting the reader with many practical applications and over 200 circuits. Most of the ICs and other devices used are inexpensive and readily available types, with universally recognised type numbers.The second edition

  12. Diagnosing Anomalous Network Performance with Confidence

    Energy Technology Data Exchange (ETDEWEB)

    Settlemyer, Bradley W [ORNL; Hodson, Stephen W [ORNL; Kuehn, Jeffery A [ORNL; Poole, Stephen W [ORNL

    2011-04-01

    Variability in network performance is a major obstacle in effectively analyzing the throughput of modern high performance computer systems. High performance interconnec- tion networks offer excellent best-case network latencies; how- ever, highly parallel applications running on parallel machines typically require consistently high levels of performance to adequately leverage the massive amounts of available computing power. Performance analysts have usually quantified network performance using traditional summary statistics that assume the observational data is sampled from a normal distribution. In our examinations of network performance, we have found this method of analysis often provides too little data to under- stand anomalous network performance. Our tool, Confidence, instead uses an empirically derived probability distribution to characterize network performance. In this paper we describe several instances where the Confidence toolkit allowed us to understand and diagnose network performance anomalies that we could not adequately explore with the simple summary statis- tics provided by traditional measurement tools. In particular, we examine a multi-modal performance scenario encountered with an Infiniband interconnection network and we explore the performance repeatability on the custom Cray SeaStar2 interconnection network after a set of software and driver updates.

  13. Confidence intervals for the lognormal probability distribution

    International Nuclear Information System (INIS)

    Smith, D.L.; Naberejnev, D.G.

    2004-01-01

    The present communication addresses the topic of symmetric confidence intervals for the lognormal probability distribution. This distribution is frequently utilized to characterize inherently positive, continuous random variables that are selected to represent many physical quantities in applied nuclear science and technology. The basic formalism is outlined herein and a conjured numerical example is provided for illustration. It is demonstrated that when the uncertainty reflected in a lognormal probability distribution is large, the use of a confidence interval provides much more useful information about the variable used to represent a particular physical quantity than can be had by adhering to the notion that the mean value and standard deviation of the distribution ought to be interpreted as best value and corresponding error, respectively. Furthermore, it is shown that if the uncertainty is very large a disturbing anomaly can arise when one insists on interpreting the mean value and standard deviation as the best value and corresponding error, respectively. Reliance on using the mode and median as alternative parameters to represent the best available knowledge of a variable with large uncertainties is also shown to entail limitations. Finally, a realistic physical example involving the decay of radioactivity over a time period that spans many half-lives is presented and analyzed to further illustrate the concepts discussed in this communication

  14. The relationship between confidence in charitable organizations and volunteering revisited

    NARCIS (Netherlands)

    Bekkers, René H.F.P.; Bowman, Woods

    2009-01-01

    Confidence in charitable organizations (charitable confidence) would seem to be an important prerequisite for philanthropic behavior. Previous research relying on cross-sectional data has suggested that volunteering promotes charitable confidence and vice versa. This research note, using new

  15. Nuclear science references coding manual

    International Nuclear Information System (INIS)

    Ramavataram, S.; Dunford, C.L.

    1996-08-01

    This manual is intended as a guide to Nuclear Science References (NSR) compilers. The basic conventions followed at the National Nuclear Data Center (NNDC), which are compatible with the maintenance and updating of and retrieval from the Nuclear Science References (NSR) file, are outlined. In Section H, the structure of the NSR file such as the valid record identifiers, record contents, text fields as well as the major TOPICS for which are prepared are enumerated. Relevant comments regarding a new entry into the NSR file, assignment of , generation of and linkage characteristics are also given in Section II. In Section III, a brief definition of the Keyword abstract is given followed by specific examples; for each TOPIC, the criteria for inclusion of an article as an entry into the NSR file as well as coding procedures are described. Authors preparing Keyword abstracts either to be published in a Journal (e.g., Nucl. Phys. A) or to be sent directly to NNDC (e.g., Phys. Rev. C) should follow the illustrations in Section III. The scope of the literature covered at the NNDC, the categorization into Primary and Secondary sources, etc., is discussed in Section IV. Useful information regarding permitted character sets, recommended abbreviations, etc., is given under Section V as Appendices

  16. Nuclear structure references coding manual

    International Nuclear Information System (INIS)

    Ramavataram, S.; Dunford, C.L.

    1984-02-01

    This manual is intended as a guide to Nuclear Structure References (NSR) compilers. The basic conventions followed at the National Nuclear Data Center (NNDC), which are compatible with the maintenance and updating of and retrieval from the Nuclear Structure References (NSR) file, are outlined. The structure of the NSR file such as the valid record identifiers, record contents, text fields as well as the major topics for which [KEYWORDS] are prepared are ennumerated. Relevant comments regarding a new entry into the NSR file, assignment of [KEYNO ], generation of [SELECTRS] and linkage characteristics are also given. A brief definition of the Keyword abstract is given followed by specific examples; for each TOPIC, the criteria for inclusion of an article as an entry into the NSR file as well as coding procedures are described. Authors submitting articles to Journals which require Keyword abstracts should follow the illustrations. The scope of the literature covered at NNDC, the categorization into Primary and Secondary sources, etc. is discussed. Useful information regarding permitted character sets, recommended abbreviations, etc. is given

  17. Radiological control manual. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  18. Radiological control manual. Revision 1

    International Nuclear Information System (INIS)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP

  19. BBC users manual

    International Nuclear Information System (INIS)

    Ltterst, R.F.; Sutcliffe, W.G.; Warshaw, S.I.

    1977-11-01

    BBC is a two-dimensional, multifluid Eulerian hydro-radiation code based on KRAKEN and some subsequent ideas. It was developed in the explosion group in T-Division as a basic two-dimensional code to which various types of physics can be added. For this reason BBC is a FORTRAN (LRLTRAN) code. In order to gain the 2-to-1 to 4-to-1 speed advantage of the STACKLIB software on the 7600's and to be able to execute at high speed on the STAR, the vector extensions of LRLTRAN (STARTRAN) are used throughout the code. Either cylindrical- or slab-type problems can be run on BBC. The grid is bounded by a rectangular band of boundary zones. The interfaces between the regular and boundary zones can be selected to be either rigid or nonrigid. The setup for BBC problems is described in the KEG Manual and LEG Manual. The difference equations are described in BBC Hydrodynamics. Basic input and output for BBC are described

  20. SYVAC3 manual

    International Nuclear Information System (INIS)

    Andres, T.H.

    2000-01-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  1. Energy statistics manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Manual is written in a question-and-answer format. The points developed are introduced with a basic question, such as: What do people mean by 'fuels' and 'energy'? What units are used to express oil? How are energy data presented? Answers are given in simple terms and illustrated by graphs, charts and tables. More technical explanations are found in the annexes. The Manual contains seven chapters. The first one presents the fundamentals of energy statistics, five chapters deal with the five different fuels (electricity and heat; natural gas; oil; solid fuels and manufactured gases; renewables and waste) and the last chapter explains the energy balance. Three technical annexes and a glossary are also included. For the five chapters dedicated to the fuels, there are three levels of reading: the first one contains general information on the subject, the second one reviews issues which are specific to the joint IEA/OECD-Eurostat-UNECE questionnaires and the third one focuses on the essential elements of the subject. 43 figs., 22 tabs., 3 annexes.

  2. MELCOR computer code manuals

    Energy Technology Data Exchange (ETDEWEB)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  3. CTF Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Avramova, Maria N. [Pennsylvania State Univ., University Park, PA (United States); Salko, Robert K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-05-25

    Coolant-Boiling in Rod Arrays|Two Fluids (COBRA-TF) is a thermal/ hydraulic (T/H) simulation code designed for light water reactor (LWR) vessel analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of 9 conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and had been used and modified by several institutions over the last few decades. COBRA-TF also found use at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG) and has been improved, updated, and subsequently re-branded as CTF. As part of the improvement process, it was necessary to generate sufficient documentation for the open-source code which had lacked such material upon being adopted by RDFMG. This document serves mainly as a theory manual for CTF, detailing the many two-phase heat transfer, drag, and important accident scenario models contained in the code as well as the numerical solution process utilized. Coding of the models is also discussed, all with consideration for updates that have been made when transitioning from COBRA-TF to CTF. Further documentation outside of this manual is also available at RDFMG which focus on code input deck generation and source code global variable and module listings.

  4. LCS Users Manual

    International Nuclear Information System (INIS)

    Redd, A.J.; Ignat, D.W.

    1998-01-01

    The Lower Hybrid Simulation Code (LSC) is a computational model of lower hybrid current drive in the presence of an electric field. Details of geometry, plasma profiles, and circuit equations are treated. Two-dimensional velocity space effects are approximated in a one-dimensional Fokker-Planck treatment. The LSC was originally written to be a module for lower hybrid current drive called by the Tokamak Simulation Code (TSC), which is a numerical model of an axisymmetric tokamak plasma and the associated control systems. The TSC simulates the time evolution of a free boundary plasma by solving the MHD equations on a rectangular computational grid. The MHD equations are coupled to the external circuits (representing poloidal field coils) through the boundary conditions. The code includes provisions for modeling the control system, external heating, and fusion heating. The LSC module can also be called by the TRANSP code. TRANSP represents the plasma with an axisymmetric, fixed-boundary model and focuses on calculation of plasma transport to determine transport coefficients from data on power inputs and parameters reached. This manual covers the basic material needed to use the LSC. If run in conjunction with TSC, the ''TSC Users Manual'' should be consulted. If run in conjunction with TRANSP, on-line documentation will be helpful. A theoretical background of the governing equations and numerical methods is given. Information on obtaining, compiling, and running the code is also provided

  5. MELCOR computer code manuals

    International Nuclear Information System (INIS)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package

  6. ARDS User Manual

    Science.gov (United States)

    Fleming, David P.

    2001-01-01

    Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

  7. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  8. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  9. SYVAC3 manual

    Energy Technology Data Exchange (ETDEWEB)

    Andres, T.H

    2000-07-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  10. Fast matching of sensor data with manual observations.

    Science.gov (United States)

    Jit, Biswas; Maniyeri, Jayachandran; Louis, Shue; Philip, Yap Lin Kiat

    2009-01-01

    In systems and trials concerning wearable sensors and devices used for medical data collection, the validation of sensor data with respect to manual observations is very important. However, this is often problematic because of feigned behavior, errors in manual recording (misclassification), gaps in recording (missing readings), missed observations and timing mismatch between manual observations and sensor data due to a difference in time granularity. Using sleep activity pattern monitoring as an example we present a fast algorithm for matching sensor data with manual observations. Major components include a) signal analysis to classify states of sleep activity pattern, b) matching of states with Sleep Diary (SD) and c) automated detection of anomalies and reconciliation of mismatches between the SD and the sensor data.

  11. The confidence in diabetes self-care scale

    DEFF Research Database (Denmark)

    Van Der Ven, Nicole C W; Weinger, Katie; Yi, Joyce

    2003-01-01

    evaluated in Dutch (n = 151) and U.S. (n = 190) outpatients with type 1 diabetes. In addition to the CIDS scale, assessment included HbA(1c), emotional distress, fear of hypoglycemia, self-esteem, anxiety, depression, and self-care behavior. The Dutch sample completed additional measures on perceived burden......OBJECTIVE: To examine psychometric properties of the Confidence in Diabetes Self-Care (CIDS) scale, a newly developed instrument assessing diabetes-specific self-efficacy in Dutch and U.S. patients with type 1 diabetes. RESEARCH DESIGN AND METHODS: Reliability and validity of the CIDS scale were...... and importance of self-care. Test-retest reliability was established in a second Dutch sample (n = 62). RESULTS: Internal consistency (Cronbach's alpha = 0.86 for Dutch patients and 0.90 U.S. patients) and test-retest reliability (Spearman's r = 0.85, P

  12. Work-related thumb disorders in South African physiotherapists treating musculoskeletal conditions using manual therapy techniques

    Directory of Open Access Journals (Sweden)

    Heather Jenkins

    2015-05-01

    Full Text Available Research question: What is the prevalence of and factors associated with work-related thumb problems (WRTP in South African physiotherapists treating musculoskeletal conditions using manual therapy techniques? Design: A cross-sectional, descriptive study design was used and data were collected using two Internet-based questionnaires. Participants: The sample size calculated for the study was 284 using 95% confidence levels and a 5% margin of error. There were 395 participants that were included in the study. Outcome measures: The variables measured included demographic, employment, educational and occupational factors. Results: The lifetime prevalence of WRTP in the physiotherapists was 65.3%. The manual techniques that were significantly associated with WRTP in the respondents who reported thumb problems were all grades of transverse glides applied to the spine as well as grade II–IV unilateral and central posterior-anterior pressures to the spine. The factors that remained significantly associated with WRTP in all 395 respondents after regression analysis were the cervical treatment of up to six patients a day and hyperextension > 30° of the non-dominant interphalangeal (IP joint of the thumb. Conclusion: This study confirms that a high percentage of physiotherapists using manual therapy techniques to treat musculoskeletal conditions are experiencing WRTP. Recommendations: The development of a valid and reliable WRTP screening tool is needed to aid in the identification of physiotherapists at risk and thus in the primary prevention of WRTP. A longitudinal study which follows newly qualified physiotherapists is recommended to investigate a possible cause-effect relationship and preventative strategies for WRTP in physiotherapists.

  13. Protein Correlation Profiles Identify Lipid Droplet Proteins with High Confidence*

    Science.gov (United States)

    Krahmer, Natalie; Hilger, Maximiliane; Kory, Nora; Wilfling, Florian; Stoehr, Gabriele; Mann, Matthias; Farese, Robert V.; Walther, Tobias C.

    2013-01-01

    Lipid droplets (LDs) are important organelles in energy metabolism and lipid storage. Their cores are composed of neutral lipids that form a hydrophobic phase and are surrounded by a phospholipid monolayer that harbors specific proteins. Most well-established LD proteins perform important functions, particularly in cellular lipid metabolism. Morphological studies show LDs in close proximity to and interacting with membrane-bound cellular organelles, including the endoplasmic reticulum, mitochondria, peroxisomes, and endosomes. Because of these close associations, it is difficult to purify LDs to homogeneity. Consequently, the confident identification of bona fide LD proteins via proteomics has been challenging. Here, we report a methodology for LD protein identification based on mass spectrometry and protein correlation profiles. Using LD purification and quantitative, high-resolution mass spectrometry, we identified LD proteins by correlating their purification profiles to those of known LD proteins. Application of the protein correlation profile strategy to LDs isolated from Drosophila S2 cells led to the identification of 111 LD proteins in a cellular LD fraction in which 1481 proteins were detected. LD localization was confirmed in a subset of identified proteins via microscopy of the expressed proteins, thereby validating the approach. Among the identified LD proteins were both well-characterized LD proteins and proteins not previously known to be localized to LDs. Our method provides a high-confidence LD proteome of Drosophila cells and a novel approach that can be applied to identify LD proteins of other cell types and tissues. PMID:23319140

  14. Confidence interval procedures for Monte Carlo transport simulations

    International Nuclear Information System (INIS)

    Pederson, S.P.

    1997-01-01

    The problem of obtaining valid confidence intervals based on estimates from sampled distributions using Monte Carlo particle transport simulation codes such as MCNP is examined. Such intervals can cover the true parameter of interest at a lower than nominal rate if the sampled distribution is extremely right-skewed by large tallies. Modifications to the standard theory of confidence intervals are discussed and compared with some existing heuristics, including batched means normality tests. Two new types of diagnostics are introduced to assess whether the conditions of central limit theorem-type results are satisfied: the relative variance of the variance determines whether the sample size is sufficiently large, and estimators of the slope of the right tail of the distribution are used to indicate the number of moments that exist. A simulation study is conducted to quantify the relationship between various diagnostics and coverage rates and to find sample-based quantities useful in indicating when intervals are expected to be valid. Simulated tally distributions are chosen to emulate behavior seen in difficult particle transport problems. Measures of variation in the sample variance s 2 are found to be much more effective than existing methods in predicting when coverage will be near nominal rates. Batched means tests are found to be overly conservative in this regard. A simple but pathological MCNP problem is presented as an example of false convergence using existing heuristics. The new methods readily detect the false convergence and show that the results of the problem, which are a factor of 4 too small, should not be used. Recommendations are made for applying these techniques in practice, using the statistical output currently produced by MCNP

  15. Technology in a crisis of confidence

    Energy Technology Data Exchange (ETDEWEB)

    Damodaran, G R

    1979-04-01

    The power that technological progress has given to engineers is examined to see if there has been a corresponding growth in human happiness. A credit/debit approach is discussed, whereby technological advancement is measured against the criteria of social good. The credit side includes medicine, agriculture, and energy use, while the debit side lists pollution, unequal distribution of technology and welfare, modern weaponry, resource depletion, and a possible decline in the quality of life. The present anti-technologists claim the debit side is now predominant, but the author challenges this position by examining the role of technology and the engineer in the society. He sees a need for renewed self-confidence and a sense of direction among engineers, but is generally optimistic that technology and civilization will continue to be intertwined. (DCK)

  16. Considering public confidence in developing regulatory programs

    International Nuclear Information System (INIS)

    Collins, S.J.

    2001-01-01

    In the area of public trust and in any investment, planning and strategy are important. While it is accepted in the United States that an essential part of our mission is to leverage our resources to improving Public Confidence this performance goal must be planned for, managed and measured. Similar to our premier performance goal of Maintaining Safety, a strategy must be developed and integrated with our external stake holders but with internal regulatory staff as well. In order to do that, business is to be conducted in an open environment, the basis for regulatory decisions has to be available through public documents and public meetings, communication must be done in clear and consistent terms. (N.C.)

  17. Validation of HEDR models

    International Nuclear Information System (INIS)

    Napier, B.A.; Simpson, J.C.; Eslinger, P.W.; Ramsdell, J.V. Jr.; Thiede, M.E.; Walters, W.H.

    1994-05-01

    The Hanford Environmental Dose Reconstruction (HEDR) Project has developed a set of computer models for estimating the possible radiation doses that individuals may have received from past Hanford Site operations. This document describes the validation of these models. In the HEDR Project, the model validation exercise consisted of comparing computational model estimates with limited historical field measurements and experimental measurements that are independent of those used to develop the models. The results of any one test do not mean that a model is valid. Rather, the collection of tests together provide a level of confidence that the HEDR models are valid

  18. Ciencias 2. Manual do Professor (Science Teacher's Manual).

    Science.gov (United States)

    Raposo, Lucilia

    This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

  19. Camp Health Aide Manual = Manual para trabajadores de salud.

    Science.gov (United States)

    Robinson, June Grube; And Others

    This bilingual manual serves as a textbook for migrant Camp Health Aides. Camp Health Aides are members of migrant labor camps enlisted to provide information about health and social services to migrant workers and their families. The manual is divided into 12 tabbed sections representing lessons. Teaching notes printed on contrasting paper…

  20. Chinese Management Research Needs Self-Confidence but not Over-confidence

    DEFF Research Database (Denmark)

    Li, Xin; Ma, Li

    2018-01-01

    Chinese management research aims to contribute to global management knowledge by offering rigorous and innovative theories and practical recommendations both for managing in China and outside. However, two seemingly opposite directions that researchers are taking could prove detrimental......-confidence, limiting theoretical innovation and practical relevance. Yet going in the other direction of overly indigenous research reflects over-confidence, often isolating the Chinese management research from the mainstream academia and at times, even becoming anti-science. A more integrated approach of conducting...... to the healthy development of Chinese management research. We argue that the two directions share a common ground that lies in the mindset regarding the confidence in the work on and from China. One direction of simply following the American mainstream on academic rigor demonstrates a lack of self...

  1. Buried Waste Program (BWP) data qualification manual

    International Nuclear Information System (INIS)

    Casey, C.; Larson, R.A.; Harris, G.A.

    1989-06-01

    The Data Qualification Manual (DQM) has been developed to discuss the process required to qualify data generated for the Buried Waste Program (BWP). The data from the BWP tasks conducted at the Radioactive Waste Management Complex (RWMC) and elsewhere will lead to remedial decisions being made which are governed by federal regulations administered by the Environmental Protection Agency (EPA). Data qualification is the process of insuring that only data of planned and known qualities are used to make a decision or answer a question. Although it is the Data Integrity Review Committee's (DIRC) responsibility to insure that the quality of all BWP data is ultimately verified and validated, all personnel who participate in the data gathering process will affect the quality of the data and must be responsible for knowing what is required to produce data of the planned quality. Therefore this manual is addressed to all participants in a data-gathering task. This manual discusses requirements to support data qualification in several areas, including: the sampling and analysis plan; data quality objectives and PARCC goals; sample custody documentation; quality assurance; assembly of the data qualification package; and existing data. 23 refs., 4 figs., 6 tabs

  2. Manual on mathematical models in isotope hydrogeology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    Methodologies based on the use of naturally occurring isotopes are, at present, an integral part of studies being undertaken for water resources assessment and management. Quantitative evaluations based on the temporal and/or spatial distribution of different isotopic species in hydrological systems require conceptual mathematical formulations. Different types of model can be employed depending on the nature of the hydrological system under investigation, the amount and type of data available, and the required accuracy of the parameter to be estimated. This manual provides an overview of the basic concepts of existing modelling approaches, procedures for their application to different hydrological systems, their limitations and data requirements. Guidance in their practical applications, illustrative case studies and information on existing PC software are also included. While the subject matter of isotope transport modelling and improved quantitative evaluations through natural isotopes in water sciences is still at the development stage, this manual summarizes the methodologies available at present, to assist the practitioner in the proper use within the framework of ongoing isotope hydrological field studies. In view of the widespread use of isotope methods in groundwater hydrology, the methodologies covered in the manual are directed towards hydrogeological applications, although most of the conceptual formulations presented would generally be valid. Refs, figs, tabs.

  3. Manual on mathematical models in isotope hydrogeology

    International Nuclear Information System (INIS)

    1996-10-01

    Methodologies based on the use of naturally occurring isotopes are, at present, an integral part of studies being undertaken for water resources assessment and management. Quantitative evaluations based on the temporal and/or spatial distribution of different isotopic species in hydrological systems require conceptual mathematical formulations. Different types of model can be employed depending on the nature of the hydrological system under investigation, the amount and type of data available, and the required accuracy of the parameter to be estimated. This manual provides an overview of the basic concepts of existing modelling approaches, procedures for their application to different hydrological systems, their limitations and data requirements. Guidance in their practical applications, illustrative case studies and information on existing PC software are also included. While the subject matter of isotope transport modelling and improved quantitative evaluations through natural isotopes in water sciences is still at the development stage, this manual summarizes the methodologies available at present, to assist the practitioner in the proper use within the framework of ongoing isotope hydrological field studies. In view of the widespread use of isotope methods in groundwater hydrology, the methodologies covered in the manual are directed towards hydrogeological applications, although most of the conceptual formulations presented would generally be valid. Refs, figs, tabs

  4. GANDALF: users' manual

    International Nuclear Information System (INIS)

    Strout, R.E. II; Beach, J.L.

    1977-01-01

    The GANDALF computer code was written to calculate neutron dose equivalent given the pulse-height data obtained by using a Linear Energy Transfer (LET) proportional counter. The code also uses pre- and/or post-calibration spectra, from an alpha source, to determine a calibration factor in keV/μ/channel. Output from the code consists of the effective radius of the detection chamber in microns, a calibration factor in keV/μ/channel, and the total dose and dose equivalent in rad or rem between any two LET energies by using the equations by Attix and Roesch [Radiation Dosimetry, 1, 71 (1968)]. This report is a user's manual and is not intended as anything else, and assumes that the user has a basic knowledge of the LLL Octopus timesharing system. However, a very brief description of how the code operates is included

  5. Coal marketing manual 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    This manual presents information for the use of marketers, consumers, analysts and investors. The information is presented in a series of tables and figures. Statistics are given for: Australian export tonnages and average export values for 1978-1985; international pig iron production 1976 to 1985; and international crude steel production 1979 to 1985. Trends in Australian export tonnages and prices of coal are reviewed. Details of international loading and discharge ports are given, together with a historical summary of shipping freight-rates since 1982. Long term contract prices for thermal and coking coal to Japan are tabulated. A review of coal and standards is given, together with Australian standards for coal and coke. A section on coal quality is included containing information on consumer coal quality preferences and Australian and Overseas coal brands and qualities. Finally an index is given of contact details of Australian and Overseas exporting companies, government departments, and the Australian Coal Association.

  6. FRMAC Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  7. New Oxford style manual

    CERN Document Server

    2012-01-01

    The New Oxford Style Manual brings together two essential reference works in a single volume: New Hart's Rules and the New Oxford Dictionary for Writers and Editors. New Hart's Rules, Oxford's definitive guide to style, consists of 20 chapters that provide authoritative and expert advice on how to prepare copy for publication. Topics covered include how to use italic, roman, and other type treatments, numbers and dates, law and legal references, illustrations, notes and references, and bibliographies. The guidelines are complemented by the New Oxford Dictionary for Writers and Editors, which features 25,000 alphabetically arranged entries giving authoritative advice on those words and names which raise questions time and time again because of spelling, capitalization, hyphenation, or cultural and historical context. Entries give full coverage of recommended spellings, variant forms, confusable words, hyphenation, capitalization, foreign and specialist terms, proper names, and abbreviations. The dictionary a...

  8. CALENDF-2010: user manual

    International Nuclear Information System (INIS)

    Sublet, Jean-Christophe; Ribon, Pierre; Coste-Delclaux, Mireille

    2011-09-01

    CALENDF-2010 represents a Fortran-95 update of the 1994, 2001 then 2005 code distribution with emphasise on programming quality and standards, physics and usage improvements. Devised to process multigroup cross-sections it relies on Gauss quadrature mathematical principle and strength. The followings processes can be handled by the code: moment probability table and effective cross-section calculation; pointwise cross section, probability table and effective cross-section regrouping; probability table condensation; probability table mix for several isotopes; probability table interpolation; effective cross section based probability table calculations; probability table calculations from effective cross-sections; cross-section comparison, complete energy pointwise cross-section processing and thickness dependent averaged transmission sample calculation. The CALENDF user manual, after having listed all principal code functions, describes sequentially each of them and gives comments on their associated output streams. Installation procedures, test cases and running time platform comparisons are given in the appendix. (authors)

  9. Google The Missing Manual

    CERN Document Server

    Milstein, Sarah; Dornfest, Rael; MacDonald, Matthew

    2008-01-01

    Google.com is one of the most popular sites on the Internet and is used around the world by millions of people every day. Sure, you know how to "Google it" when you're searching for something--anything!--on the Web. It's plenty fast and easy to use. But did you know how much more you could achieve with the world's best search engine by clicking beyond the "Google Search" button? While you can interface with Google in 97 languages and glean results in 35, you can't find any kind of instruction manual from Google. Lucky for you, our fully updated and greatly expanded second edition to the best

  10. WISDAAM software programmer's manual

    International Nuclear Information System (INIS)

    Ball, J.R.

    1992-10-01

    The WISDAAM system was developed to provide quality control over test data associated with in situ testing at the Waste Isolation Pilot Plant (WIPP). Assurance of data quality is of critical importance as these tests supply the information which will be used for development and verification of the technology required for repository implementation. The amount of data collected from the tests, which are some of the largest ever fielded in an underground facility, prompted the undertaking of a major project task to address data processing. The goal was to create a conceptual umbrella under which all of the activities associated with processing WIPP data (i.e., data reduction, archiving, retrieval, etc.) could be grouped. The WISDAAM system was the product of this task. The overall system covers electronic as well as manual data processing; however, this document deals primarily with those operations implemented by software running on a VAX computer

  11. Pressure vessel design manual

    CERN Document Server

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  12. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  13. STAIRS User's Manual

    Energy Technology Data Exchange (ETDEWEB)

    Gadjokov, V; Dragulev, V; Gove, N; Schmid, H

    1976-10-15

    The STorage And Information Retrieval System (STAIRS) of IBM is described from the user's point of view. The description is based on the experimental use of STAIRS at the IAEA computer, with INIS and AGRIS data bases, from June 1975 to May 1976. Special attention is paid to what may be termed the hierarchical approach to retrieval in STAIRS. Such an approach allows for better use of the intrinsic data-base structure and, hence, contributes to higher recall and/or relevance ratios in retrieval. The functions carried out by STAIRS are explained and the communication language between the user and the system outlined. Details are given of the specific structure of the INIS and AGRIS data bases for STAIRS. The manual should enable an inexperienced user to start his first on-line dialogues by means of a CRT or teletype terminal. (author)

  14. Wikipedia the missing manual

    CERN Document Server

    Broughton, John

    2008-01-01

    Want to be part of the largest group-writing project in human history? Learn how to contribute to Wikipedia, the user-generated online reference for the 21st century. Considered more popular than eBay, Microsoft.com, and Amazon.com, Wikipedia servers respond to approximately 30,000 requests per second, or about 2.5 billion per day. It's become the first point of reference for people the world over who need a fact fast.If you want to jump on board and add to the content, Wikipedia: The Missing Manual is your first-class ticket. Wikipedia has more than 9 million entries in 250 languages, over 2

  15. STAIRS User's Manual

    International Nuclear Information System (INIS)

    Gadjokov, V.; Dragulev, V.; Gove, N.; Schmid, H.

    1976-10-01

    The STorage And Information Retrieval System (STAIRS) of IBM is described from the user's point of view. The description is based on the experimental use of STAIRS at the IAEA computer, with INIS and AGRIS data bases, from June 1975 to May 1976. Special attention is paid to what may be termed the hierarchical approach to retrieval in STAIRS. Such an approach allows for better use of the intrinsic data-base structure and, hence, contributes to higher recall and/or relevance ratios in retrieval. The functions carried out by STAIRS are explained and the communication language between the user and the system outlined. Details are given of the specific structure of the INIS and AGRIS data bases for STAIRS. The manual should enable an inexperienced user to start his first on-line dialogues by means of a CRT or teletype terminal. (author)

  16. Nuclear medicine resources manual

    International Nuclear Information System (INIS)

    2006-02-01

    Over the past decade many IAEA programmes have significantly enhanced the capabilities of numerous Member States in the field of nuclear medicine. Functional imaging using nuclear medicine procedures has become an indispensable tool for the diagnosis, treatment planning and management of patients. However, due to the heterogeneous growth and development of nuclear medicine in the IAEA's Member States, the operating standards of practice vary considerably from country to country and region to region. This publication is the result of the work of over 30 international professionals who have assisted the IAEA in the process of standardization and harmonization. This manual sets out the prerequisites for the establishment of a nuclear medicine service, including basic infrastructure, suitable premises, reliable supply of electricity, maintenance of a steady temperature, dust exclusion for gamma cameras and radiopharmacy dispensaries. It offers clear guidance on human resources and training needs for medical doctors, technologists, radiopharmaceutical scientists, physicists and specialist nurses in the practice of nuclear medicine. The manual describes the requirements for safe preparation and quality control of radiopharmaceuticals. In addition, it contains essential requirements for maintenance of facilities and instruments, for radiation hygiene and for optimization of nuclear medicine operational performance with the use of working clinical protocols. The result is a comprehensive guide at an international level that contains practical suggestions based on the experience of professionals around the globe. This publication will be of interest to nuclear medicine physicians, radiologists, medical educationalists, diagnostic centre managers, medical physicists, medical technologists, radiopharmacists, specialist nurses, clinical scientists and those engaged in quality assurance and control systems in public health in both developed and developing countries

  17. Manual of radioisotope production

    International Nuclear Information System (INIS)

    1966-01-01

    The Manual of Radioisotope Production has been compiled primarily to help small reactor establishments which need a modest programme of radioisotope production for local requirements. It is not comprehensive, but gives guidance on essential preliminary considerations and problems that may be met in the early stages of production. References are included as an aid to the reader who wishes to seek further in the extensive literature on the subject. In preparing the Manual, which is in two parts, the Agency consulted several Member States which already have long experience in radioisotope production. An attempt has been made to condense this experience, firstly, by setting out the technical and economic considerations which govern the planning and execution of an isotope programme and, secondly, by providing experimental details of isotope production processes. Part I covers topics common to all radioisotope processing, namely, laboratory design, handling and dispensing of radioactive solutions, quality control, measurement and radiological safety. Part II contains information on the fifteen radioisotopes in most common use. These are bromine-82, cobalt-58, chromium-51, copper-64, fluorine-18, gold-198, iodine-131, iron-59, magnesium-28, potassium-42, sodium-24, phosphorus-32, sulphur-35, yttrium-90 and zinc-65. Their nuclear properties are described, references to typical applications are given and published methods of production are reviewed; also included are descriptions in detail of the production processes used at several national atomic energy organizations. No attempt has been made to distinguish the best values for nuclear data or to comment on the relative merits of production processes. Each process is presented essentially as it was described by the contributor on the understanding that critical comparisons are not necessary for processes which have been well tried in practical production for many years. The information is presented as a guide to enable

  18. Evaluation of ergonomic risk factors in manual patient handling ...

    African Journals Online (AJOL)

    WMSDs among nurses in West Bengal, India, evaluates the postural stresses and analyses manual patient handling risks. Responses were collected from 220 nurses by validated questionnaires. The activity and posture analyses were done through photography and by Rapid Entire Body Assessment (REBA). Results ...

  19. The Job Training and Job Satisfaction Survey Technical Manual

    Science.gov (United States)

    Schmidt, Steven W.

    2004-01-01

    Job training has become an important aspect of an employee's overall job experience. However, it is not often called out specifically on instruments measuring job satisfaction. This technical manual details the processes used in the development and validation of a survey instrument to measure job training satisfaction and overall job…

  20. Automation of cellular therapy product manufacturing: results of a split validation comparing CD34 selection of peripheral blood stem cell apheresis product with a semi-manual vs. an automatic procedure.

    Science.gov (United States)

    Hümmer, Christiane; Poppe, Carolin; Bunos, Milica; Stock, Belinda; Wingenfeld, Eva; Huppert, Volker; Stuth, Juliane; Reck, Kristina; Essl, Mike; Seifried, Erhard; Bonig, Halvard

    2016-03-16

    Automation of cell therapy manufacturing promises higher productivity of cell factories, more economical use of highly-trained (and costly) manufacturing staff, facilitation of processes requiring manufacturing steps at inconvenient hours, improved consistency of processing steps and other benefits. One of the most broadly disseminated engineered cell therapy products is immunomagnetically selected CD34+ hematopoietic "stem" cells (HSCs). As the clinical GMP-compliant automat CliniMACS Prodigy is being programmed to perform ever more complex sequential manufacturing steps, we developed a CD34+ selection module for comparison with the standard semi-automatic CD34 "normal scale" selection process on CliniMACS Plus, applicable for 600 × 10(6) target cells out of 60 × 10(9) total cells. Three split-validation processings with healthy donor G-CSF-mobilized apheresis products were performed; feasibility, time consumption and product quality were assessed. All processes proceeded uneventfully. Prodigy runs took about 1 h longer than CliniMACS Plus runs, albeit with markedly less hands-on operator time and therefore also suitable for less experienced operators. Recovery of target cells was the same for both technologies. Although impurities, specifically T- and B-cells, were 5 ± 1.6-fold and 4 ± 0.4-fold higher in the Prodigy products (p = ns and p = 0.013 for T and B cell depletion, respectively), T cell contents per kg of a virtual recipient receiving 4 × 10(6) CD34+ cells/kg was below 10 × 10(3)/kg even in the worst Prodigy product and thus more than fivefold below the specification of CD34+ selected mismatched-donor stem cell products. The products' theoretical clinical usability is thus confirmed. This split validation exercise of a relatively short and simple process exemplifies the potential of automatic cell manufacturing. Automation will further gain in attractiveness when applied to more complex processes, requiring frequent interventions or handling at

  1. Site security personnel training manual

    International Nuclear Information System (INIS)

    1978-10-01

    As required by 10 CFR Part 73, this training manual provides guidance to assist licensees in the development of security personnel training and qualifications programs. The information contained in the manual typifies the level and scope of training for personnel assigned to perform security related tasks and job duties associated with the protection of nuclear fuel cycle facilities and nuclear power reactors

  2. Kinesiology Workbook and Laboratory Manual.

    Science.gov (United States)

    Harris, Ruth W.

    This manual is written for students in anatomy, kinesiology, or introductory biomechanics courses. The book is divided into two sections, a kinesiology workbook and a laboratory manual. The two sections parallel each other in content and format. Each is divided into three corresponding sections: (1) Anatomical bases for movement description; (2)…

  3. Dental Chairside Technique. Student's Manual.

    Science.gov (United States)

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  4. Managerial Accounting. Course Administrative Manual.

    Science.gov (United States)

    Central Michigan Univ., Mount Pleasant. Inst. for Personal and Career Development.

    This manual is part of the materials for a college-level programmed course in managerial accounting and intended to aid instructors in helping students to work their way through the self-instructional study guide around which the course is organized. The manual describes the various materials and components used in the self-instructional sequence…

  5. The theory of confidence-building measures

    International Nuclear Information System (INIS)

    Darilek, R.E.

    1992-01-01

    This paper discusses the theory of Confidence-Building Measures (CBMs) in two ways. First, it employs a top-down, deductively oriented approach to explain CBM theory in terms of the arms control goals and objectives to be achieved, the types of measures to be employed, and the problems or limitations likely to be encountered when applying CBMs to conventional or nuclear forces. The chapter as a whole asks how various types of CBMs might function during a political - military escalation from peacetime to a crisis and beyond (i.e. including conflict), as well as how they might operate in a de-escalatory environment. In pursuit of these overarching issues, the second section of the chapter raises a fundamental but complicating question: how might the next all-out war actually come aoubt - by unpremeditated escalation resulting from misunderstanding or miscalculation, or by premeditation resulting in a surprise attack? The second section of the paper addresses this question, explores its various implications for CBMs, and suggests the potential contribution of different types of CBMs toward successful resolution of the issues involved

  6. Energy price dispute - companies are confident

    International Nuclear Information System (INIS)

    Marcan, P.; Slovak, P.

    2007-01-01

    Energy prices stipulated for 2003 were not compliant with the valid legislation. The Constitutional Court has repeatedly confirmed this fact. The dispute between several Slovak companies and the state will address the damage caused by illegal actions taken by the public authority, including loss of profit. A group of claimants represented by the Club 500 association is claiming up to 2 bil. Sk (57.97 mil. EUR) as compensation for the mistake made by the Office for Regulation of Network Industries (URSO), including the unclear calculation of the lost profit of companies. It will be up to the courts to decide whether the price deregulation really caused damage to the companies or whether they just took advantage of the faulty legislation.The companies base their claims on a decision of the Constitutional Court. Last year the Court twice announced that the 2003 energy prices were not compliant with valid legislation. At that time, Slovakia lacked a generally binding regulation that should have been in place according to the Act on Regulation of Network Industries. Currently, the role of these missing regulations has been taken over by URSO decrees. These stipulate justified costs and adequate profit of energy suppliers. The regulator had such a decree prepared at the end of 2002, but due to material stipulations and time constraints it did not publish it. (authors)

  7. The operation and maintenance manual

    International Nuclear Information System (INIS)

    Stoll, A.; Krotil, H.; Klein, W.

    1976-01-01

    The operating manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the operating manual. The operating manual is an essential element in bringing man and machine in harmony. This is necessary for safe and, as far as possible, uninterrupted operation of the power plant. The operating manual is the only document containing binding instructions for plant operation. All the tasks of plant operation which are carried out by plant staff are described in the operating manual in a form which is as clear and comprehensible as possible. A considerable number of these tasks can only be carried out by man, namely: 1) tasks concerning operational organization, 2) all non-automated areas of plant operation. (orig./TK) [de

  8. Cross validation in LULOO

    DEFF Research Database (Denmark)

    Sørensen, Paul Haase; Nørgård, Peter Magnus; Hansen, Lars Kai

    1996-01-01

    The leave-one-out cross-validation scheme for generalization assessment of neural network models is computationally expensive due to replicated training sessions. Linear unlearning of examples has recently been suggested as an approach to approximative cross-validation. Here we briefly review...... the linear unlearning scheme, dubbed LULOO, and we illustrate it on a systemidentification example. Further, we address the possibility of extracting confidence information (error bars) from the LULOO ensemble....

  9. Automated quantification of optic nerve axons in primate glaucomatous and normal eyes--method and comparison to semi-automated manual quantification.

    Science.gov (United States)

    Reynaud, Juan; Cull, Grant; Wang, Lin; Fortune, Brad; Gardiner, Stuart; Burgoyne, Claude F; Cioffi, George A

    2012-05-01

    To describe an algorithm and software application (APP) for 100% optic nerve axon counting and to compare its performance with a semi-automated manual (SAM) method in optic nerve cross-section images (images) from normal and experimental glaucoma (EG) nonhuman primate (NHP) eyes. ON cross sections from eight EG eyes from eight NHPs, five EG and five normal eyes from five NHPs, and 12 normal eyes from 12 NHPs were imaged at 100×. Calibration (n = 500) and validation (n = 50) image sets ranging from normal to end-stage damage were assembled. Correlation between APP and SAM axon counts was assessed by Deming regression within the calibration set and a compensation formula was generated to account for the subtle, systematic differences. Then, compensated APP counts for each validation image were compared with the mean and 95% confidence interval of five SAM counts of the validation set performed by a single observer. Calibration set APP counts linearly correlated to SAM counts (APP = 10.77 + 1.03 [SAM]; R(2) = 0.94, P < 0.0001) in normal to end-stage damage images. In the validation set, compensated APP counts fell within the 95% confidence interval of the SAM counts in 42 of the 50 images and were within 12 axons of the confidence intervals in six of the eight remaining images. Uncompensated axon density maps for the normal and EG eyes of a representative NHP were generated. An APP for 100% ON axon counts has been calibrated and validated relative to SAM counts in normal and EG NHP eyes.

  10. Automated Quantification of Optic Nerve Axons in Primate Glaucomatous and Normal Eyes—Method and Comparison to Semi-Automated Manual Quantification

    Science.gov (United States)

    Reynaud, Juan; Cull, Grant; Wang, Lin; Fortune, Brad; Gardiner, Stuart; Burgoyne, Claude F; Cioffi, George A

    2012-01-01

    Purpose. To describe an algorithm and software application (APP) for 100% optic nerve axon counting and to compare its performance with a semi-automated manual (SAM) method in optic nerve cross-section images (images) from normal and experimental glaucoma (EG) nonhuman primate (NHP) eyes. Methods. ON cross sections from eight EG eyes from eight NHPs, five EG and five normal eyes from five NHPs, and 12 normal eyes from 12 NHPs were imaged at 100×. Calibration (n = 500) and validation (n = 50) image sets ranging from normal to end-stage damage were assembled. Correlation between APP and SAM axon counts was assessed by Deming regression within the calibration set and a compensation formula was generated to account for the subtle, systematic differences. Then, compensated APP counts for each validation image were compared with the mean and 95% confidence interval of five SAM counts of the validation set performed by a single observer. Results. Calibration set APP counts linearly correlated to SAM counts (APP = 10.77 + 1.03 [SAM]; R2 = 0.94, P < 0.0001) in normal to end-stage damage images. In the validation set, compensated APP counts fell within the 95% confidence interval of the SAM counts in 42 of the 50 images and were within 12 axons of the confidence intervals in six of the eight remaining images. Uncompensated axon density maps for the normal and EG eyes of a representative NHP were generated. Conclusions. An APP for 100% ON axon counts has been calibrated and validated relative to SAM counts in normal and EG NHP eyes. PMID:22467571

  11. Manual on radiation haematology

    International Nuclear Information System (INIS)

    1971-01-01

    Studies of the biological effects of ionizing radiation have led to the introduction of various measures to protect both the public and personnel engaged in occupations where they could be exposed to such radiations. Many recent studies deal with the basic mechanism of radiation injuries and with their treatment, and some of these investigations have been sponsored by the World Health Organization and the International Atomic Energy Agency. Fundamental studies of the blood-forming tissue have provided the information necessary for formulating recommendations of the International Commission on Radiological Protection. Heinecke in 1903 was the first to note damage to the haemato-poietic tissue after whole-body irradiation. Since that time we have learned much of the functions of the various components of the blood. Many studies have been undertaken to understand the proliferative capacities of the various 'stem' cells involved in the haematopoietic processes and the extent to which these processes can be interfered with by ionizing radiations. We now understand which are the reliable criteria by which radiation damage can be assessed from its effects on the haematopoietic system. In addition, much work has been done to determine how radiation injury to the hematopoietic system may be offset by therapy. In developing countries radiation is being increasingly applied in medical work and many other fields, and there is an immediate need to disseminate information relevant to radiation hazards. This Manual on Radiation Haematology is an attempt at a synthesis of much that is relevant to these matters. As the Contents List shows, many experts have contributed to the book. Their styles have been changed as little as possible. A certain amount of duplication of information could not be avoided; where an editorial decision to remove a passage would have resulted in losing the exact concept that the author wished to express, this passage has been retained. Information from

  12. Examining Belief and Confidence in Schizophrenia

    Science.gov (United States)

    Joyce, Dan W.; Averbeck, Bruno B.; Frith, Chris D.; Shergill, Sukhwinder S.

    2018-01-01

    Background People with psychoses often report fixed, delusional beliefs that are sustained even in the presence of unequivocal contrary evidence. Such delusional beliefs are the result of integrating new and old evidence inappropriately in forming a cognitive model. We propose and test a cognitive model of belief formation using experimental data from an interactive “Rock Paper Scissors” game. Methods Participants (33 controls and 27 people with schizophrenia) played a competitive, time-pressured interactive two-player game (Rock, Paper, Scissors). Participant’s behavior was modeled by a generative computational model using leaky-integrator and temporal difference methods. This model describes how new and old evidence is integrated to form both a playing strategy to beat the opponent and provide a mechanism for reporting confidence in one’s playing strategy to win against the opponent Results People with schizophrenia fail to appropriately model their opponent’s play despite consistent (rather than random) patterns that can be exploited in the simulated opponent’s play. This is manifest as a failure to weigh existing evidence appropriately against new evidence. Further, participants with schizophrenia show a ‘jumping to conclusions’ bias, reporting successful discovery of a winning strategy with insufficient evidence. Conclusions The model presented suggests two tentative mechanisms in delusional belief formation – i) one for modeling patterns in other’s behavior, where people with schizophrenia fail to use old evidence appropriately and ii) a meta-cognitive mechanism for ‘confidence’ in such beliefs where people with schizophrenia overweight recent reward history in deciding on the value of beliefs about the opponent. PMID:23521846

  13. New highway accident location manual for Missouri.

    Science.gov (United States)

    2013-12-01

    The Missouri HAL manual is used to identify, analyze, and correct high crash locations, and has not been updated since : 1999. This new edition brings the manual up to date, while incorporating the methodology of the national Highway Safety : Manual ...

  14. ARS-Media for excel instruction manual

    Science.gov (United States)

    ARS-Media for Excel Instruction Manual is the instruction manual that explains how to use the Excel spreadsheet ARS-Media for Excel application. ARS-Media for Excel Instruction Manual is provided as a pdf file....

  15. TJ-II Library Manual (Version 2)

    International Nuclear Information System (INIS)

    Tribaldos, V.; Milligen, B. Ph. van; Lopez-Fraguas, A.

    2001-01-01

    This is a manual of use of the TJ2 Numerical Library that has been developed for making numerical computations of different TJ-II configurations. This manual is a new version of the earlier manual CIEMAT report 806. (Author)

  16. Manual braille writer

    Science.gov (United States)

    Hawk, Lawrence S.; Turner, Joe H.

    1992-01-01

    A manual-type braille writer that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted.

  17. Manual braille writer

    Science.gov (United States)

    Hawk, L.S.; Turner, J.H.

    1992-07-28

    A manual-type braille writer is described that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted. 10 figs.

  18. Uranium tailings sampling manual

    International Nuclear Information System (INIS)

    Feenstra, S.; Reades, D.W.; Cherry, J.A.; Chambers, D.B.; Case, G.G.; Ibbotson, B.G.

    1985-01-01

    The purpose of this manual is to describe the requisite sampling procedures for the application of uniform high-quality standards to detailed geotechnical, hydrogeological, geochemical and air quality measurements at Canadian uranium tailings disposal sites. The selection and implementation of applicable sampling procedures for such measurements at uranium tailings disposal sites are complicated by two primary factors. Firstly, the physical and chemical nature of uranium mine tailings and effluent is considerably different from natural soil materials and natural waters. Consequently, many conventional methods for the collection and analysis of natural soils and waters are not directly applicable to tailings. Secondly, there is a wide range in the physical and chemical nature of uranium tailings. The composition of the ore, the milling process, the nature of tailings depositon, and effluent treatment vary considerably and are highly site-specific. Therefore, the definition and implementation of sampling programs for uranium tailings disposal sites require considerable evaluation, and often innovation, to ensure that appropriate sampling and analysis methods are used which provide the flexibility to take into account site-specific considerations. The following chapters describe the objective and scope of a sampling program, preliminary data collection, and the procedures for sampling of tailings solids, surface water and seepage, tailings pore-water, and wind-blown dust and radon

  19. DIMAC program user's manual

    International Nuclear Information System (INIS)

    Lee, Byoung Oon; Song, Tae Young

    2003-11-01

    DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this report

  20. DIMAC program user's manual

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byoung Oon; Song, Tae Young

    2003-11-01

    DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this repo0008.

  1. IAEA safeguards technical manual

    International Nuclear Information System (INIS)

    1982-03-01

    Part F of the Safeguards Technical Manual is being issued in three volumes. Volume 1 was published in 1977 and revised slightly in 1979. Volume 1 discusses basic probability concepts, statistical inference, models and measurement errors, estimation of measurement variances, and calibration. These topics of general interest in a number of application areas, are presented with examples drawn from nuclear materials safeguards. The final two chapters in Volume 1 deal with problem areas unique to safeguards: calculating the variance of MUF and of D respectively. Volume 2 continues where Volume 1 left off with a presentation of topics of specific interest to Agency safeguards. These topics include inspection planning from a design and effectiveness evaluation viewpoint, on-facility site inspection activities, variables data analysis as applied to inspection data, preparation of inspection reports with respect to statistical aspects of the inspection, and the distribution of inspection samples to more than one analytical laboratory. Volume 3 covers generally the same material as Volumes 1 and 2 but with much greater unity and cohesiveness. Further, the cook-book style of the previous two volumes has been replaced by one that makes use of equations and formulas as opposed to computational steps, and that also provides the bases for the statistical procedures discussed. Hopefully, this will help minimize the frequency of misapplications of the techniques

  2. Program management system manual

    International Nuclear Information System (INIS)

    1989-08-01

    OCRWM has developed a program management system (PMS) to assist in organizing, planning, directing and controlling the Civilian Radioactive Waste Management Program. A well defined management system is necessary because: (1) the Program is a complex technical undertaking with a large number of participants, (2) the disposal and storage facilities to be developed by the Program must be licensed by the Nuclear Regulatory Commission (NRC) and hence are subject to rigorous quality assurance (QA) requirements, (3) the legislation mandating the Program creates a dichotomy between demanding schedules of performance and a requirement for close and continuous consultation and cooperation with external entities, (4) the various elements of the Program must be managed as parts of an integrated waste management system, (5) the Program has an estimated total system life cycle cost of over $30 billion, and (6) the Program has a unique fiduciary responsibility to the owners and generators of the nuclear waste for controlling costs and minimizing the user fees paid into the Nuclear Waste Fund. This PMS Manual is designed and structured to facilitate strong, effective Program management by providing policies and requirements for organizing, planning, directing and controlling the major Program functions

  3. Stirling engine design manual

    Science.gov (United States)

    Martini, W. R.

    1978-01-01

    This manual is intended to serve both as an introduction to Stirling engine analysis methods and as a key to the open literature on Stirling engines. Over 800 references are listed and these are cross referenced by date of publication, author and subject. Engine analysis is treated starting from elementary principles and working through cycles analysis. Analysis methodologies are classified as first, second or third order depending upon degree of complexity and probable application; first order for preliminary engine studies, second order for performance prediction and engine optimization, and third order for detailed hardware evaluation and engine research. A few comparisons between theory and experiment are made. A second order design procedure is documented step by step with calculation sheets and a worked out example to follow. Current high power engines are briefly described and a directory of companies and individuals who are active in Stirling engine development is included. Much remains to be done. Some of the more complicated and potentially very useful design procedures are now only referred to. Future support will enable a more thorough job of comparing all available design procedures against experimental data which should soon be available.

  4. Learning about confidence intervals with software R

    Directory of Open Access Journals (Sweden)

    Gariela Gonçalves

    2013-08-01

    Full Text Available 0 0 1 202 1111 USAL 9 2 1311 14.0 Normal 0 21 false false false ES JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:Calibri; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:ES; mso-fareast-language:EN-US;} This work was to study the feasibility of implementing a teaching method that employs software, in a Computational Mathematics course, involving students and teachers through the use of the statistical software R in carrying out practical work, such as strengthening the traditional teaching. The statistical inference, namely the determination of confidence intervals, was the content selected for this experience. It was intended show, first of all, that it is possible to promote, through the proposal methodology, the acquisition of basic skills in statistical inference and to promote the positive relationships between teachers and students. It presents also a comparative study between the methodologies used and their quantitative and qualitative results on two consecutive school years, in several indicators. The data used in the study were obtained from the students to the exam questions in the years 2010/2011 and 2011/2012, from the achievement of a working group in 2011/2012 and via the responses to a questionnaire (optional and anonymous also applied in 2011 / 2012. In terms of results, we emphasize a better performance of students in the examination questions in 2011/2012, the year that students used the software R, and a very favorable student’s perspective about

  5. Confidence Intervals from Normalized Data: A correction to Cousineau (2005

    Directory of Open Access Journals (Sweden)

    Richard D. Morey

    2008-09-01

    Full Text Available Presenting confidence intervals around means is a common method of expressing uncertainty in data. Loftus and Masson (1994 describe confidence intervals for means in within-subjects designs. These confidence intervals are based on the ANOVA mean squared error. Cousineau (2005 presents an alternative to the Loftus and Masson method, but his method produces confidence intervals that are smaller than those of Loftus and Masson. I show why this is the case and offer a simple correction that makes the expected size of Cousineau confidence intervals the same as that of Loftus and Masson confidence intervals.

  6. HVAC system operation manual of IMEF

    International Nuclear Information System (INIS)

    Baek, Sang Yeol; Park, Dae Kyu; Ahn, Sang Bok; Ju, Yong Sun.

    1997-06-01

    This manual is operation procedures of the IMEF(Irradiated Material Examination Facility) HVAC(Heating, Ventilation and Air Conditioning) System. General operation procedures and test method of the IMEF HVAC system are described. The manual is as follows; 1. HVAC system operation manual 2. HVAC system management guide 3. HVAC system maintenance manual 4. HVAC system air velocity and flowrate measurement manual 5. HVAC system HEPA filter leak test manual 6. HVAC system charcoal filter leak test manual 7. HVAC system HEPA and charcoal filter exchange manual. (author). 8 tabs

  7. A Regions of Confidence Based Approach to Enhance Segmentation with Shape Priors.

    Science.gov (United States)

    Appia, Vikram V; Ganapathy, Balaji; Abufadel, Amer; Yezzi, Anthony; Faber, Tracy

    2010-01-18

    We propose an improved region based segmentation model with shape priors that uses labels of confidence/interest to exclude the influence of certain regions in the image that may not provide useful information for segmentation. These could be regions in the image which are expected to have weak, missing or corrupt edges or they could be regions in the image which the user is not interested in segmenting, but are part of the object being segmented. In the training datasets, along with the manual segmentations we also generate an auxiliary map indicating these regions of low confidence/interest. Since, all the training images are acquired under similar conditions, we can train our algorithm to estimate these regions as well. Based on this training we will generate a map which indicates the regions in the image that are likely to contain no useful information for segmentation. We then use a parametric model to represent the segmenting curve as a combination of shape priors obtained by representing the training data as a collection of signed distance functions. We evolve an objective energy functional to evolve the global parameters that are used to represent the curve. We vary the influence each pixel has on the evolution of these parameters based on the confidence/interest label. When we use these labels to indicate the regions with low confidence; the regions containing accurate edges will have a dominant role in the evolution of the curve and the segmentation in the low confidence regions will be approximated based on the training data. Since our model evolves global parameters, it improves the segmentation even in the regions with accurate edges. This is because we eliminate the influence of the low confidence regions which may mislead the final segmentation. Similarly when we use the labels to indicate the regions which are not of importance, we will get a better segmentation of the object in the regions we are interested in.

  8. Implementation of remote video auditing with feedback and compliance for manual-cleaning protocols of endoscopic retrograde cholangiopancreatography endoscopes.

    Science.gov (United States)

    Armellino, Donna; Cifu, Kelly; Wallace, Maureen; Johnson, Sherly; DiCapua, John; Dowling, Oonagh; Jacobs, Mitchel; Browning, Susan

    2018-05-01

    A pilot initiative to assess the use of remote video auditing in monitoring compliance with manual-cleaning protocols for endoscopic retrograde cholangiopancreatography (ERCP) endoscopes was performed. Compliance with manual-cleaning steps following the initiation of feedback was measured. A video feed of the ERCP reprocessing room was provided to remote auditors who scored items of an ERCP endoscope manual-cleaning checklist. Compliance feedback was provided in the form of reports and reeducation. Outcomes were reported as checklist compliance. The use of remote video auditing to document manual processing is a feasible approach and feedback and reeducation increased manual-cleaning compliance from 53.1% (95% confidence interval, 34.7-71.6) to 98.9% (95.0% confidence interval, 98.1-99.6). Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  9. Sources of sport confidence, imagery type and performance among competitive athletes: the mediating role of sports confidence.

    Science.gov (United States)

    Levy, A R; Perry, J; Nicholls, A R; Larkin, D; Davies, J

    2015-01-01

    This study explored the mediating role of sport confidence upon (1) sources of sport confidence-performance relationship and (2) imagery-performance relationship. Participants were 157 competitive athletes who completed state measures of confidence level/sources, imagery type and performance within one hour after competition. Among the current sample, confirmatory factor analysis revealed appropriate support for the nine-factor SSCQ and the five-factor SIQ. Mediational analysis revealed that sport confidence had a mediating influence upon the achievement source of confidence-performance relationship. In addition, both cognitive and motivational imagery types were found to be important sources of confidence, as sport confidence mediated imagery type- performance relationship. Findings indicated that athletes who construed confidence from their own achievements and report multiple images on a more frequent basis are likely to benefit from enhanced levels of state sport confidence and subsequent performance.

  10. FAMIAS User Manual

    Science.gov (United States)

    Zima, Wolfgang

    2008-10-01

    The excitation of pulsation modes in Beta Cephei and Slowly Pulsating B stars is known to be very sensitive to opacity changes in the stellar interior where T ~ 2 x 10E5 K. In this region differences in opacity up to ~ 50% can be induced by the choice between OPAL and OP opacity tables, and between two different metal mixtures (Grevesse & Noels 1993 and Asplund et al. 2005). We have extended the non-adiabatic computations presented in Miglio et al. (2007) towards models of higher mass and pulsation modes of degree l = 3, and we present here the instability domains in the HR- and log P-log Teff diagrams resulting from different choices of opacity tables, and for three different metallicities. FAMIAS (Frequency Analysis and Mode Identification for AsteroSeismology) is a collection of state-of-the-art software tools for the analysis of photometric and spectroscopic time series data. It is one of the deliverables of the Work Package NA5: Asteroseismology of the European Coordination Action in Helio-and Asteroseismology (HELAS). Two main sets of tools are incorporated in FAMIAS. The first set allows to search for periodicities in the data using Fourier and non-linear least-squares fitting algorithms. The other set allows to carry out a mode identification for the detected pulsation frequencies to determine their pulsational quantum numbers, the harmonic degree, m. The types of stars to which famias is applicable are main-sequence pulsators hotter than the Sun. This includes the Gamma Dor stars, Delta Sct stars, the slowly pulsating B stars and the Beta Cep stars - basically all pulsating main-sequence stars, for which empirical mode identification is required to successfully carry out asteroseismology. This user manual describes how to use the different features of FAMIAS and provides two tutorials that demonstrate the usage of FAMIAS for spectroscopic and photometric mode identification.

  11. Construction inspection manual of procedures

    Science.gov (United States)

    2009-01-01

    This manual provides highway construction personnel with relevant, practical information in order to perform accurate inspections and provide relevant construction procedural information for the various roadway and structures items of work. It is the...

  12. Are Manual Typewriters Becoming Obsolete?

    Science.gov (United States)

    Johnston, Jean

    1976-01-01

    A University of Akron survey of the Akron area revealed that the general trend is for large companies to use manual typewriters in their business offices. Implications for typewriting instruction are discussed. (JT)

  13. Manual on indoor air quality

    International Nuclear Information System (INIS)

    Diamond, R.C.; Grimsrud, D.T.

    1983-12-01

    This reference manual was prepared to assist electric utilities in helping homeowners, builders, and new home buyers to understand a broad range of issues related to indoor air quality. The manual is directed to technically knowledgeable persons employed by utility companies - the customer service or marketing representative, applications engineer, or technician - who may not have specific expertise in indoor air quality issues. In addition to providing monitoring and control techniques, the manual summarizes the link between pollutant concentrations, air exchange, and energy conservation and describes the characteristics and health effects of selected pollutants. Where technical information is too lengthy or complex for inclusion in this volume, reference sources are given. Information for this manual was gathered from technical studies, manufacturers' information, and other materials from professional societies, institutes, and associations. The aim has been to provide objective technical and descriptive information that can be used by utility personnel to make informed decisions about indoor air quality issues

  14. Surface Environmental Surveillance Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  15. Manual on indoor air quality

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, R.C.; Grimsrud, D.T.

    1983-12-01

    This reference manual was prepared to assist electric utilities in helping homeowners, builders, and new home buyers to understand a broad range of issues related to indoor air quality. The manual is directed to technically knowledgeable persons employed by utility companies - the customer service or marketing representative, applications engineer, or technician - who may not have specific expertise in indoor air quality issues. In addition to providing monitoring and control techniques, the manual summarizes the link between pollutant concentrations, air exchange, and energy conservation and describes the characteristics and health effects of selected pollutants. Where technical information is too lengthy or complex for inclusion in this volume, reference sources are given. Information for this manual was gathered from technical studies, manufacturers' information, and other materials from professional societies, institutes, and associations. The aim has been to provide objective technical and descriptive information that can be used by utility personnel to make informed decisions about indoor air quality issues.

  16. Transportation security personnel training manual

    International Nuclear Information System (INIS)

    1978-11-01

    This volume is the instructor's manual for the training of SNM guards. Covered are: self-defense, arrest authority, civil liability, report writing, stress, tactics, and situational training scenarios

  17. Transportation security personnel training manual

    International Nuclear Information System (INIS)

    1978-11-01

    Objective of this manual is to train security personnel to protect special nuclear materials and nuclear facilities against theft and sabotage as required by 10 CFR Part 73. This volume contains the introduction and rationale

  18. Alternative confidence measure for local matching stereo algorithms

    CSIR Research Space (South Africa)

    Ndhlovu, T

    2009-11-01

    Full Text Available The authors present a confidence measure applied to individual disparity estimates in local matching stereo correspondence algorithms. It aims at identifying textureless areas, where most local matching algorithms fail. The confidence measure works...

  19. nigerian students' self-confidence in responding to statements

    African Journals Online (AJOL)

    Temechegn

    Altogether the test is made up of 40 items covering students' ability to recall definition ... confidence interval within which student have confidence in their choice of the .... is mentioned these equilibrium systems come to memory of the learner.

  20. M3 User's Manual. Version 3.0

    International Nuclear Information System (INIS)

    Laaksoharju, Marcus; Skaarman, Erik; Gomez, Javier B.

    2009-11-01

    This report describes the Multivariate Mixing and Mass balance calculations (M3). This new method and computer code is developed to trace the mixing and reaction processes in the groundwater. The aim of the M3 concept is to decode the often hidden and complex information gathered in the groundwater analytical data. The manual presents shortly the theory and practice behind the M3 method. The M3 computer code is also presented and emphasis is put on the reference manual. This includes detailed reference to the M3 program's abilities and limitations, installation procedures and all functions and operations that the program can perform. It also describes sample cases of how the program is used to analyse a test data set. This guide is part of the Help Files distributed together with M3. Two accompanying reports cover other aspects: - Concepts, Methods, and Mathematical Formulation, gives a complete description of the mathematical framework of M3 and introduces concepts and methods useful for the end user. - M3 version 3.0: Verification and Validation, gathers a collection of validation and verification exercises, designed to test each part of M3 code and to build confidence in its methodology. The M3 method has been tested and modified over several years. The development work has been supported by the Swedish Nuclear Fuel and Waste Management Company (SKB). The main test site for the model was the underground Aespoe Hard Rock Laboratory (HRL). The examples used in this manual are from a Aespoe international groundwater modelling co-operation project where one of the tools used was M3. The M3 concept has been applied on the data from SKB's site investigation programme and in data from Canada, Japan, Jordan, Gabon and Finland. The groundwater composition is a result of mixing processes and water-rock interaction. Standard groundwater models based on thermodynamic laws may not be applicable in a normal temperature groundwater system where equilibrium with many of the

  1. The operation and maintenance manual

    International Nuclear Information System (INIS)

    Klein, W.; Krotil, H.; Stoll, A.

    1975-01-01

    The Operating Manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the Operating Manual. It contains, appropriately arranged, the necessary system and other diagrams, drawings, lists, licensing documents and similar material, which are necessary for understanding the design, for testing, for obtaining the operating licence and for the operation of individual systems and of the entire plant. (orig./RW) [de

  2. State Energy Program Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Office of Building Technology, State and Community Programs

    1999-03-17

    The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

  3. Simultaneous confidence bands for the integrated hazard function

    OpenAIRE

    Dudek, Anna; Gocwin, Maciej; Leskow, Jacek

    2006-01-01

    The construction of the simultaneous confidence bands for the integrated hazard function is considered. The Nelson--Aalen estimator is used. The simultaneous confidence bands based on bootstrap methods are presented. Two methods of construction of such confidence bands are proposed. The weird bootstrap method is used for resampling. Simulations are made to compare the actual coverage probability of the bootstrap and the asymptotic simultaneous confidence bands. It is shown that the equal--tai...

  4. 49 CFR 1103.23 - Confidences of a client.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Confidences of a client. 1103.23 Section 1103.23... Responsibilities Toward A Client § 1103.23 Confidences of a client. (a) The practitioner's duty to preserve his client's confidence outlasts the practitioner's employment by the client, and this duty extends to the...

  5. Contrasting Academic Behavioural Confidence in Mexican and European Psychology Students

    Science.gov (United States)

    Ochoa, Alma Rosa Aguila; Sander, Paul

    2012-01-01

    Introduction: Research with the Academic Behavioural Confidence scale using European students has shown that students have high levels of confidence in their academic abilities. It is generally accepted that people in more collectivist cultures have more realistic confidence levels in contrast to the overconfidence seen in individualistic European…

  6. Building confidence and credibility amid growing model and computing complexity

    Science.gov (United States)

    Evans, K. J.; Mahajan, S.; Veneziani, C.; Kennedy, J. H.

    2017-12-01

    As global Earth system models are developed to answer an ever-wider range of science questions, software products that provide robust verification, validation, and evaluation must evolve in tandem. Measuring the degree to which these new models capture past behavior, predict the future, and provide the certainty of predictions is becoming ever more challenging for reasons that are generally well known, yet are still challenging to address. Two specific and divergent needs for analysis of the Accelerated Climate Model for Energy (ACME) model - but with a similar software philosophy - are presented to show how a model developer-based focus can address analysis needs during expansive model changes to provide greater fidelity and execute on multi-petascale computing facilities. A-PRIME is a python script-based quick-look overview of a fully-coupled global model configuration to determine quickly if it captures specific behavior before significant computer time and expense is invested. EVE is an ensemble-based software framework that focuses on verification of performance-based ACME model development, such as compiler or machine settings, to determine the equivalence of relevant climate statistics. The challenges and solutions for analysis of multi-petabyte output data are highlighted from the aspect of the scientist using the software, with the aim of fostering discussion and further input from the community about improving developer confidence and community credibility.

  7. Semi-automating the manual literature search for systematic reviews increases efficiency.

    Science.gov (United States)

    Chapman, Andrea L; Morgan, Laura C; Gartlehner, Gerald

    2010-03-01

    To minimise retrieval bias, manual literature searches are a key part of the search process of any systematic review. Considering the need to have accurate information, valid results of the manual literature search are essential to ensure scientific standards; likewise efficient approaches that minimise the amount of personnel time required to conduct a manual literature search are of great interest. The objective of this project was to determine the validity and efficiency of a new manual search method that utilises the scopus database. We used the traditional manual search approach as the gold standard to determine the validity and efficiency of the proposed scopus method. Outcome measures included completeness of article detection and personnel time involved. Using both methods independently, we compared the results based on accuracy of the results, validity and time spent conducting the search, efficiency. Regarding accuracy, the scopus method identified the same studies as the traditional approach indicating its validity. In terms of efficiency, using scopus led to a time saving of 62.5% compared with the traditional approach (3 h versus 8 h). The scopus method can significantly improve the efficiency of manual searches and thus of systematic reviews.

  8. Comprehensive Plan for Public Confidence in Nuclear Regulator

    International Nuclear Information System (INIS)

    Choi, Kwang Sik; Choi, Young Sung; Kim, Ho ki

    2008-01-01

    Public confidence in nuclear regulator has been discussed internationally. Public trust or confidence is needed for achieving regulatory goal of assuring nuclear safety to the level that is acceptable by the public or providing public ease for nuclear safety. In Korea, public ease or public confidence has been suggested as major policy goal in the 'Nuclear regulatory policy direction' annually announced. This paper reviews theory of trust, its definitions and defines nuclear safety regulation, elements of public trust or public confidence developed based on the study conducted so far. Public ease model developed and 10 measures for ensuring public confidence are also presented and future study directions are suggested

  9. ACT Plan: Technical Manual. 2013/2014

    Science.gov (United States)

    ACT, Inc., 2013

    2013-01-01

    This manual contains information about the American College Test (ACT) Plan® program. The principal focus of this manual is to document the Plan program's technical adequacy in light of its intended purposes. This manual supersedes the 2011 edition. The content of this manual responds to requirements of the testing industry as established in the…

  10. Confidence Intervals: From tests of statistical significance to confidence intervals, range hypotheses and substantial effects

    Directory of Open Access Journals (Sweden)

    Dominic Beaulieu-Prévost

    2006-03-01

    Full Text Available For the last 50 years of research in quantitative social sciences, the empirical evaluation of scientific hypotheses has been based on the rejection or not of the null hypothesis. However, more than 300 articles demonstrated that this method was problematic. In summary, null hypothesis testing (NHT is unfalsifiable, its results depend directly on sample size and the null hypothesis is both improbable and not plausible. Consequently, alternatives to NHT such as confidence intervals (CI and measures of effect size are starting to be used in scientific publications. The purpose of this article is, first, to provide the conceptual tools necessary to implement an approach based on confidence intervals, and second, to briefly demonstrate why such an approach is an interesting alternative to an approach based on NHT. As demonstrated in the article, the proposed CI approach avoids most problems related to a NHT approach and can often improve the scientific and contextual relevance of the statistical interpretations by testing range hypotheses instead of a point hypothesis and by defining the minimal value of a substantial effect. The main advantage of such a CI approach is that it replaces the notion of statistical power by an easily interpretable three-value logic (probable presence of a substantial effect, probable absence of a substantial effect and probabilistic undetermination. The demonstration includes a complete example.

  11. BLOCKAGE 2.5 reference manual

    International Nuclear Information System (INIS)

    Shaffer, C.J.; Brideau, J.; Rao, D.V.; Bernahl, W.

    1996-12-01

    The BLOCKAGE 2.5 code was developed by the US Nuclear Regulatory Commission (NRC) as a tool to evaluate license compliance regarding the design of suction strainers for emergency core cooling system (ECCS) pumps in boiling water reactors (BWR) as required by NRC Bulletin 96-03, ''Potential Plugging of Emergency Core Cooling Suction Strainers by Debris in Boiling Water Reactors''. Science and Engineering Associates, Inc. (SEA) and Software Edge, Inc. (SE) developed this PC-based code. The instructions to effectively use this code to evaluate the potential of debris to sufficiently block a pump suction strainer such that a pump could lose NPSH margin was documented in a User's Manual (NRC, NUREG/CR-6370). The Reference Manual contains additional information that supports the use of BLOCKAGE 2.5. It contains descriptions of the analytical models contained in the code, programmer guides illustrating the structure of the code, and summaries of coding verification and model validation exercises that were performed to ensure that the analytical models were correctly coded and applicable to the evaluation of BWR pump suction strainers. The BLOCKAGE code was developed by SEA and programmed in FORTRAN as a code that can be executed from the DOS level on a PC. A graphical users interface (GUI) was then developed by SEA to make BLOCKAGE easier to use and to provide graphical output capability. The GUI was programmed in the C language. The user has the option of executing BLOCKAGE 2.5 with the GUI or from the DOS level and the Users Manual provides instruction for both methods of execution

  12. Effects of postidentification feedback on eyewitness identification and nonidentification confidence.

    Science.gov (United States)

    Semmler, Carolyn; Brewer, Neil; Wells, Gary L

    2004-04-01

    Two experiments investigated new dimensions of the effect of confirming feedback on eyewitness identification confidence using target-absent and target-present lineups and (previously unused) unbiased witness instructions (i.e., "offender not present" option highlighted). In Experiment 1, participants viewed a crime video and were later asked to try to identify the thief from an 8-person target-absent photo array. Feedback inflated witness confidence for both mistaken identifications and correct lineup rejections. With target-present lineups in Experiment 2, feedback inflated confidence for correct and mistaken identifications and lineup rejections. Although feedback had no influence on the confidence-accuracy correlation, it produced clear overconfidence. Confidence inflation varied with the confidence measure reference point (i.e., retrospective vs. current confidence) and identification response latency.

  13. Effects of confidence and anxiety on flow state in competition.

    Science.gov (United States)

    Koehn, Stefan

    2013-01-01

    Confidence and anxiety are important variables that underlie the experience of flow in sport. Specifically, research has indicated that confidence displays a positive relationship and anxiety a negative relationship with flow. The aim of this study was to assess potential direct and indirect effects of confidence and anxiety dimensions on flow state in tennis competition. A sample of 59 junior tennis players completed measures of Competitive State Anxiety Inventory-2d and Flow State Scale-2. Following predictive analysis, results showed significant positive correlations between confidence (intensity and direction) and anxiety symptoms (only directional perceptions) with flow state. Standard multiple regression analysis indicated confidence as the only significant predictor of flow. The results confirmed a protective function of confidence against debilitating anxiety interpretations, but there were no significant interaction effects between confidence and anxiety on flow state.

  14. Desalination Economic Evaluation Program (DEEP). User's manual

    International Nuclear Information System (INIS)

    2000-01-01

    DEEP (formerly named ''Co-generation and Desalination Economic Evaluation'' Spreadsheet, CDEE) has been developed originally by General Atomics under contract, and has been used in the IAEA's feasibility studies. For further confidence in the software, it was validated in March 1998. After that, a user friendly version has been issued under the name of DEEP at the end of 1998. DEEP output includes the levelised cost of water and power, a breakdown of cost components, energy consumption and net saleable power for each selected option. Specific power plants can be modelled by adjustment of input data including design power, power cycle parameters and costs

  15. Simulation Assessment Validation Environment (SAVE). Software User’s Manual

    Science.gov (United States)

    2000-09-01

    TOOL USAGE Figure 2-14: Factory Simulation Tool Usage This tool directly emulates real-world system behaviors that are associated with each resource...manufacturing simulation tools and Computer Aided Design (CAD) tools. The Factory/Schedule Simulation tool is used to simulate real-world system behaviors ...char Name>_pfchar Part Usage(Produced)/Part/Feature/Char <partuseName>_<partName>_<matName>_<char Name>_cmat PartUsage( Comsumed )/Part/Material

  16. Vaccination Confidence and Parental Refusal/Delay of Early Childhood Vaccines.

    Directory of Open Access Journals (Sweden)

    Melissa B Gilkey

    Full Text Available To support efforts to address parental hesitancy towards early childhood vaccination, we sought to validate the Vaccination Confidence Scale using data from a large, population-based sample of U.S. parents.We used weighted data from 9,354 parents who completed the 2011 National Immunization Survey. Parents reported on the immunization history of a 19- to 35-month-old child in their households. Healthcare providers then verified children's vaccination status for vaccines including measles, mumps, and rubella (MMR, varicella, and seasonal flu. We used separate multivariable logistic regression models to assess associations between parents' mean scores on the 8-item Vaccination Confidence Scale and vaccine refusal, vaccine delay, and vaccination status.A substantial minority of parents reported a history of vaccine refusal (15% or delay (27%. Vaccination confidence was negatively associated with refusal of any vaccine (odds ratio [OR] = 0.58, 95% confidence interval [CI], 0.54-0.63 as well as refusal of MMR, varicella, and flu vaccines specifically. Negative associations between vaccination confidence and measures of vaccine delay were more moderate, including delay of any vaccine (OR = 0.81, 95% CI, 0.76-0.86. Vaccination confidence was positively associated with having received vaccines, including MMR (OR = 1.53, 95% CI, 1.40-1.68, varicella (OR = 1.54, 95% CI, 1.42-1.66, and flu vaccines (OR = 1.32, 95% CI, 1.23-1.42.Vaccination confidence was consistently associated with early childhood vaccination behavior across multiple vaccine types. Our findings support expanding the application of the Vaccination Confidence Scale to measure vaccination beliefs among parents of young children.

  17. BLOCKAGE 2.5 user's manual

    International Nuclear Information System (INIS)

    Rao, D.V.; Brideau, J.; Shaffer, C.; Souto, F.; Bernahl, W.

    1996-12-01

    The BLOCKAGE 2.5 code described in this User's Manual was developed by the US Nuclear Regulatory Commission (NRC) as a tool to evaluate licensee compliance with NRC Bulletin 96-03, ''Potential Plugging of Emergency Core Cooling Suction Strainers by Debris in Boiling Water Reactors.'' As such, BLOCKAGE 2.5 provides a generalized framework into which a user can input plant-specific and insulation-specific data for performing analyses in accordance with Regulatory Guide 1.82, Rev. 2. This user's manual describes the capabilities of BLOCKAGE 2.5 along with a description of the graphics user's interface provided for data entry. Each input/output dialog is described in detail along with special considerations related to developing and executing BLOCKAGE. Also, several sample problems are provided such that user can easily modify them to suit a particular plant of interest. The models used in BLOCKAGE 2.5 and their validation are presented in the accompanying NUREG/CR-6371. The BLOCKAGE models were designed to be parametric in nature, allowing the user flexibility to examine the impact of several modeling assumptions and to conduct sensitivity analyses. As a result, BLOCKAGE 2.5 results are known to be very sensitive to the user provided input. It is therefore strongly recommended that users become thoroughly familiar with BLOCKAGE models and their limitations as described in NUREG/CR-6224

  18. Methane measurements manual; Handbok metanmaetningar

    Energy Technology Data Exchange (ETDEWEB)

    Holmgren, Magnus Andreas (SP Technical research institute of Sweden, Boraas (Sweden))

    2011-02-15

    Emissions to air in different parts of the system may arise in biogas plants, where there is biological treatment of organic matter by anaerobic degradation, and during upgrading of biogas to vehicle fuel. There are mainly four reasons why these emissions must be minimized. These are safety, greenhouse gas emissions, economy and smell. This manual gathers experience of several years of work with measurement of methane emissions from biogas and upgrading facilities. This work has been done mainly in the context of Swedish Waste Management's system of voluntary commitment. The purpose of this manual is to standardize methods and procedures when methane measurements are carried out so that the results are comparable between different providers. The main target group of the manual is measurement consultants performing such measurements. Calculation template in Excel is part of the manual, which further contributes to the measurements evaluated in a standardized way. The manual contains several examples which have been calculated in the accompanying Excel template. The handbook also contains a chapter mainly intended for facility staff, in which implementation of accurate leak detection is described, and where there are hints of a system of so-called intermediate inspections to detect leaks in time

  19. A study of whether automated Diabetic Retinopathy Image Assessment could replace manual grading steps in the English National Screening Programme.

    Science.gov (United States)

    Kapetanakis, Venediktos V; Rudnicka, Alicja R; Liew, Gerald; Owen, Christopher G; Lee, Aaron; Louw, Vern; Bolter, Louis; Anderson, John; Egan, Catherine; Salas-Vega, Sebastian; Rudisill, Caroline; Taylor, Paul; Tufail, Adnan

    2015-09-01

    Diabetic retinopathy screening in England involves labour intensive manual grading of digital retinal images. We present the plan for an observational retrospective study of whether automated systems could replace one or more steps of human grading. Patients aged 12 or older who attended the Diabetes Eye Screening programme, Homerton University Hospital (London) between 1 June 2012 and 4 November 2013 had macular and disc-centred retinal images taken. All screening episodes were manually graded and will additionally be graded by three automated systems. Each system will process all screening episodes, and screening performance (sensitivity, false positive rate, likelihood ratios) and diagnostic accuracy (95% confidence intervals of screening performance measures) will be quantified. A sub-set of gradings will be validated by an approved Reading Centre. Additional analyses will explore the effect of altering thresholds for disease detection within each automated system on screening performance. 2,782/20,258 diabetes patients were referred to ophthalmologists for further examination. Prevalence of maculopathy (M1), pre-proliferative retinopathy (R2), and proliferative retinopathy (R3) were 7.9%, 3.1% and 1.2%, respectively; 4749 (23%) patients were diagnosed with background retinopathy (R1); 1.5% were considered ungradable by human graders. Retinopathy prevalence was similar to other English diabetic screening programmes, so findings should be generalizable. The study population size will allow the detection of differences in screening performance between the human and automated grading systems as small as 2%. The project will compare performance and economic costs of manual versus automated systems. © The Author(s) 2015.

  20. Design/CPN. A Reference Manual

    DEFF Research Database (Denmark)

    Jensen et. al, Kurt

    /CPN WWW pages. To speed up the access to the Design/CPN manuals we recommend to keep a local copy - which may be shared by all users in your organisation. In this way you do not need to go via our WWW server each time you need to look in a manual. For some of the largest manuals, we also supply files......Note: The manuals are available as PDF files . There are two sets of manuals - one for the Unix platform and another for the Mac platform. Each set of manual consists of: Tutorial (for the Design/CPN editor and simulator) Reference Manual (for the Design/CPN editor and simulator) Programmer......'s Manual (with Design/OA functions and Charts) Occurrence Graph Manual (integrated tutorial and reference manual) OE/OS Graph Manual (integrated tutorial and reference manual) Other Manuals (e.g. a short overview of CPN ML).   The Tutorial, Reference Manual and Programmer's Manual are made for Design...

  1. Beyond hypercorrection: remembering corrective feedback for low-confidence errors.

    Science.gov (United States)

    Griffiths, Lauren; Higham, Philip A

    2018-02-01

    Correcting errors based on corrective feedback is essential to successful learning. Previous studies have found that corrections to high-confidence errors are better remembered than low-confidence errors (the hypercorrection effect). The aim of this study was to investigate whether corrections to low-confidence errors can also be successfully retained in some cases. Participants completed an initial multiple-choice test consisting of control, trick and easy general-knowledge questions, rated their confidence after answering each question, and then received immediate corrective feedback. After a short delay, they were given a cued-recall test consisting of the same questions. In two experiments, we found high-confidence errors to control questions were better corrected on the second test compared to low-confidence errors - the typical hypercorrection effect. However, low-confidence errors to trick questions were just as likely to be corrected as high-confidence errors. Most surprisingly, we found that memory for the feedback and original responses, not confidence or surprise, were significant predictors of error correction. We conclude that for some types of material, there is an effortful process of elaboration and problem solving prior to making low-confidence errors that facilitates memory of corrective feedback.

  2. Factors affecting midwives' confidence in intrapartum care: a phenomenological study.

    Science.gov (United States)

    Bedwell, Carol; McGowan, Linda; Lavender, Tina

    2015-01-01

    midwives are frequently the lead providers of care for women throughout labour and birth. In order to perform their role effectively and provide women with the choices they require midwives need to be confident in their practice. This study explores factors which may affect midwives' confidence in their practice. hermeneutic phenomenology formed the theoretical basis for the study. Prospective longitudinal data collection was completed using diaries and semi-structured interviews. Twelve midwives providing intrapartum care in a variety of settings were recruited to ensure a variety of experiences in different contexts were captured. the principal factor affecting workplace confidence, both positively and negatively, was the influence of colleagues. Perceived autonomy and a sense of familiarity could also enhance confidence. However, conflict in the workplace was a critical factor in reducing midwives' confidence. Confidence was an important, but fragile, phenomenon to midwives and they used a variety of coping strategies, emotional intelligence and presentation management to maintain it. this is the first study to highlight both the factors influencing midwives' workplace confidence and the strategies midwives employed to maintain their confidence. Confidence is important in maintaining well-being and workplace culture may play a role in explaining the current low morale within the midwifery workforce. This may have implications for women's choices and care. Support, effective leadership and education may help midwives develop and sustain a positive sense of confidence. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. How to build confidence in climate science and politics? Return on an international conference

    International Nuclear Information System (INIS)

    Aykut, Stefan C.

    2015-01-01

    Taking as a starting point the communications at an international conference held in Paris in 2014, the article analyzes the construction of confidence in climate sciences and politics. How, by which methods and procedures, do climate modeling communities establish the validity of their models? What link can be established between the confidence in numerical simulations of global warming and in the capacity of the international system to successfully tackle the climate issue? The article shows that the existence of a close link between these different forms of confidence questions common belief that expertise should be completely separated from the political process. More generally, it examines the necessity of a 'constitution' for the science-policy relationship at the global level at a time where new paradigms for research and for policy converge toward increasing importance of regional and local levels

  4. Students' confidence in the ability to transfer basic math skills in introductory physics and chemistry courses at a community college

    Science.gov (United States)

    Quinn, Reginald

    2013-01-01

    The purpose of this study was to examine the confidence levels that community college students have in transferring basic math skills to science classes, as well as any factors that influence their confidence levels. This study was conducted with 196 students at a community college in central Mississippi. The study was conducted during the month of November after all of the students had taken their midterm exams and received midterm grades. The instrument used in this survey was developed and validated by the researcher. The instrument asks the students to rate how confident they were in working out specific math problems and how confident they were in working problems using those specific math skills in physics and chemistry. The instrument also provided an example problem for every confidence item. Results revealed that students' demographics were significant predictors in confidence scores. Students in the 18-22 year old range were less confident in solving math problems than others. Students who had retaken a math course were less confident than those who had not. Chemistry students were less confident in solving math problems than those in physics courses. Chemistry II students were less confident than those in Chemistry I and Principals of Chemistry. Students were least confident in solving problems involving logarithms and the most confident in solving algebra problems. In general, students felt that their math courses did not prepare them for the math problems encountered in science courses. There was no significant difference in confidence between students who had completed their math homework online and those who had completed their homework on paper. The researcher recommends that chemistry educators find ways of incorporating more mathematics in their courses especially logarithms and slope. Furthermore, math educators should incorporate more chemistry related applications to math class. Results of hypotheses testing, conclusions, discussions, and

  5. WAM-E user's manual

    International Nuclear Information System (INIS)

    Rayes, L.G.; Riley, J.E.

    1986-07-01

    The WAM-E series of mainframe computer codes have been developed to efficiently analyze the large binary models (e.g., fault trees) used to represent the logic relationships within and between the systems of a nuclear power plant or other large, multisystem entity. These codes have found wide application in reliability and safety studies of nuclear power plant systems. There are now nine codes in the WAM-E series, with six (WAMBAM/WAMTAP, WAMCUT, WAMCUT-II, WAMFM, WAMMRG, and SPASM) classified as Type A Production codes and the other three (WAMFTP, WAMTOP, and WAMCONV) classified as Research codes. This document serves as a combined User's Guide, Programmer's Manual, and Theory Reference for the codes, with emphasis on the Production codes. To that end, the manual is divided into four parts: Part I, Introduction; Part II, Theory and Numerics; Part III, WAM-E User's Guide; and Part IV, WAMMRG Programmer's Manual

  6. Educating for a Change. A Skillshop for Immigrant Community Educators. Workshop Manual.

    Science.gov (United States)

    Doris Marshall Inst. for Education and Action, Toronto (Ontario).

    This manual provides materials for a 6-day workshop for immigrant women working on the issue of woman abuse; it is intended to help them do their own programs in their own language out of their own cultural context. Objectives of the course are as follows: to increase educator skills and confidence in (1) developing learning activities and using…

  7. Native Students with Problems of Addiction. A Manual for Adult Educators.

    Science.gov (United States)

    Hale, Janet Campbell; And Others

    This manual's purpose is to help adult-education instructors to deal with addictive or preaddictive behavior in their Native American students. The impact of alcohol and drug-related social problems has been devastating to Native communities. It is essential to examine broader issues such as cultural identity, ethnic pride, self-confidence, and…

  8. Can confidence indicators forecast the probability of expansion in Croatia?

    Directory of Open Access Journals (Sweden)

    Mirjana Čižmešija

    2016-04-01

    Full Text Available The aim of this paper is to investigate how reliable are confidence indicators in forecasting the probability of expansion. We consider three Croatian Business Survey indicators: the Industrial Confidence Indicator (ICI, the Construction Confidence Indicator (BCI and the Retail Trade Confidence Indicator (RTCI. The quarterly data, used in the research, covered the periods from 1999/Q1 to 2014/Q1. Empirical analysis consists of two parts. The non-parametric Bry-Boschan algorithm is used for distinguishing periods of expansion from the period of recession in the Croatian economy. Then, various nonlinear probit models were estimated. The models differ with respect to the regressors (confidence indicators and the time lags. The positive signs of estimated parameters suggest that the probability of expansion increases with an increase in Confidence Indicators. Based on the obtained results, the conclusion is that ICI is the most powerful predictor of the probability of expansion in Croatia.

  9. Confidence mediates the sex difference in mental rotation performance.

    Science.gov (United States)

    Estes, Zachary; Felker, Sydney

    2012-06-01

    On tasks that require the mental rotation of 3-dimensional figures, males typically exhibit higher accuracy than females. Using the most common measure of mental rotation (i.e., the Mental Rotations Test), we investigated whether individual variability in confidence mediates this sex difference in mental rotation performance. In each of four experiments, the sex difference was reliably elicited and eliminated by controlling or manipulating participants' confidence. Specifically, confidence predicted performance within and between sexes (Experiment 1), rendering confidence irrelevant to the task reliably eliminated the sex difference in performance (Experiments 2 and 3), and manipulating confidence significantly affected performance (Experiment 4). Thus, confidence mediates the sex difference in mental rotation performance and hence the sex difference appears to be a difference of performance rather than ability. Results are discussed in relation to other potential mediators and mechanisms, such as gender roles, sex stereotypes, spatial experience, rotation strategies, working memory, and spatial attention.

  10. Coping skills: role of trait sport confidence and trait anxiety.

    Science.gov (United States)

    Cresswell, Scott; Hodge, Ken

    2004-04-01

    The current research assesses relationships among coping skills, trait sport confidence, and trait anxiety. Two samples (n=47 and n=77) of international competitors from surf life saving (M=23.7 yr.) and touch rugby (M=26.2 yr.) completed the Athletic Coping Skills Inventory, Trait Sport Confidence Inventory, and Sport Anxiety Scale. Analysis yielded significant correlations amongst trait anxiety, sport confidence, and coping. Specifically confidence scores were positively associated with coping with adversity scores and anxiety scores were negatively associated. These findings support the inclusion of the personality characteristics of confidence and anxiety within the coping model presented by Hardy, Jones, and Gould, Researchers should be aware that confidence and anxiety may influence the coping processes of athletes.

  11. ARIES NDA Robot operators' manual

    International Nuclear Information System (INIS)

    Scheer, N.L.; Nelson, D.C.

    1998-05-01

    The ARIES NDA Robot is an automation device for servicing the material movements for a suite of Non-destructive assay (NDA) instruments. This suite of instruments includes a calorimeter, a gamma isotopic system, a segmented gamma scanner (SGS), and a neutron coincidence counter (NCC). Objects moved by the robot include sample cans, standard cans, and instrument plugs. The robot computer has an RS-232 connection with the NDA Host computer, which coordinates robot movements and instrument measurements. The instruments are expected to perform measurements under the direction of the Host without operator intervention. This user's manual describes system startup, using the main menu, manual operation, and error recovery

  12. Manual for Cyclic Triaxial Test

    DEFF Research Database (Denmark)

    Shajarati, Amir; Sørensen, Kris Wessel; Nielsen, Søren Kjær

    This manual describes the different steps that is included in the procedure for conducting a cyclic triaxial test at the geotechnical Laboratory at Aalborg University. Furthermore it contains a chapter concerning some of the background theory for the static triaxial tests. The cyclic/dynamic tria......This manual describes the different steps that is included in the procedure for conducting a cyclic triaxial test at the geotechnical Laboratory at Aalborg University. Furthermore it contains a chapter concerning some of the background theory for the static triaxial tests. The cyclic...

  13. Manual on decontamination of surfaces

    International Nuclear Information System (INIS)

    1979-01-01

    The manual is intended for those who are responsible for the organization and implementation of decontamination programmes for facilities where radioactive materials are handled mainly on a laboratory scale. It contains information and guidelines on practical methods for decontaminating working spaces, equipment, laboratory benches and protective clothing. Useful information is also provided on the removal of loose skin contamination from personnel by mild, non-medical processes. Methods of removing skin contamination needing medical supervision, or of internal decontamination, which is entirely a medical process, are not covered in this manual. Large-scale decontamination of big nuclear facilities is also considered as outside its scope

  14. Droid X The Missing Manual

    CERN Document Server

    Gralla, Preston

    2011-01-01

    Get the most from your Droid X right away with this entertaining Missing Manual. Veteran tech author Preston Gralla offers a guided tour of every feature, with lots of expert tips and tricks along the way. You'll learn how to use calling and texting features, take and share photos, enjoy streaming music and video, and much more. Packed with full-color illustrations, this engaging book covers everything from getting started to advanced features and troubleshooting. Unleash the power of Motorola's hot new device with Droid X: The Missing Manual. Get organized. Import your contacts and sync wit

  15. Motorola Xoom The Missing Manual

    CERN Document Server

    Gralla, Preston

    2011-01-01

    Motorola Xoom is the first tablet to rival the iPad, and no wonder with all of the great features packed into this device. But learning how to use everything can be tricky-and Xoom doesn't come with a printed guide. That's where this Missing Manual comes in. Gadget expert Preston Gralla helps you master your Xoom with step-by-step instructions and clear explanations. As with all Missing Manuals, this book offers refreshing, jargon-free prose and informative illustrations. Use your Xoom as an e-book reader, music player, camcorder, and phoneKeep in touch with email, video and text chat, and so

  16. Matematica 2. Manual do Professor (Mathematics 2. Teacher's Manual).

    Science.gov (United States)

    D'Alu, Maria Jose Miranda de Sousa

    This teacher's manual accompanies a mathematics textbook for second graders, written in Portuguese. Developed from objectives set forth by the National Portuguese Materials Development Center, it follows closely the objectives and methodology of major curricula used in schools of the United States. Consideration was given to the Portuguese child's…

  17. Is consumer confidence an indicator of JSE performance?

    OpenAIRE

    Kamini Solanki; Yudhvir Seetharam

    2014-01-01

    While most studies examine the impact of business confidence on market performance, we instead focus on the consumer because consumer spending habits are a natural extension of trading activity on the equity market. This particular study examines investor sentiment as measured by the Consumer Confidence Index in South Africa and its effect on the Johannesburg Stock Exchange (JSE). We employ Granger causality tests to investigate the relationship across time between the Consumer Confidence Ind...

  18. Preservice teachers' perceived confidence in teaching school violence prevention.

    Science.gov (United States)

    Kandakai, Tina L; King, Keith A

    2002-01-01

    To examine preservice teachers' perceived confidence in teaching violence prevention and the potential effect of violence-prevention training on preservice teachers' confidence in teaching violence prevention. Six Ohio universities participated in the study. More than 800 undergraduate and graduate students completed surveys. Violence-prevention training, area of certification, and location of student- teaching placement significantly influenced preservice teachers' perceived confidence in teaching violence prevention. Violence-prevention training positively influences preservice teachers' confidence in teaching violence prevention. The results suggest that such training should be considered as a requirement for teacher preparation programs.

  19. The antecedents and belief-polarized effects of thought confidence.

    Science.gov (United States)

    Chou, Hsuan-Yi; Lien, Nai-Hwa; Liang, Kuan-Yu

    2011-01-01

    This article investigates 2 possible antecedents of thought confidence and explores the effects of confidence induced before or during ad exposure. The results of the experiments indicate that both consumers' dispositional optimism and spokesperson attractiveness have significant effects on consumers' confidence in thoughts that are generated after viewing the advertisement. Higher levels of thought confidence will influence the quality of the thoughts that people generate, lead to either positively or negatively polarized message processing, and therefore induce better or worse advertising effectiveness, depending on the valence of thoughts. The authors posit the belief-polarization hypothesis to explain these findings.

  20. COSIS User's Manual

    International Nuclear Information System (INIS)

    Cho, J. Y.; Lee, K. B.; Koo, B. S.; Lee, W. K.; Lee, C. C.; Zee, S. Q.

    2006-02-01

    COSIS (COre State Indication System) which implemented in the SMART research reactor plays a role to supply the core state parameters or graphs for the operator to recognize the core state effectively. The followings are the main functions of COSIS. Validity Check for the Process Signals and Determination of the COSIS Inputs (SIGVAL), Coolant Flow Rate Calculation (FLOW), Core Thermal Power Calculation (COREPOW), In-core 3-Dimensional Power Distribution Calculation and Peaking Parameters Generation (POWER3D), Azimuthal Tilt Calculation (AZITILT). This report describes the structures of the I/O files that are essential for the users to run COSIS. COSIS handles the following 4 input files. DATABASE: The base input file, COSIS.INP: The signal input file, CCS.DAT: File required for the in-core detector signal processing and the 3-D power distribution calculation, TPFH2O: Steam table for the water properties The DATABASE file contains the base information for a nuclear power plant and is read at the first COSIS calculation. The COSIS.INP file contains the process input and detector signals, and is read by COSIS at every second. CCS.DAT file, that is produced by the COSISMAS code, contains the information for the in-core detector signal processing and the 3-D power distribution calculation. TPFH2O file is a steam table and is written in binary format. COSIS produces the following 4 output files. DATABASE.OUT: The output file for the DATABASE input file, COSIS.OUT: The normal output file produced after the COSIS calculation, COSIS.SUM: File for the operator to recognize the core state effectively, MAS S IG: File to run the COSISMAS code The DATABASE.OUT file is produced right after finishing DATABASE processing. The COSIS.OUT file is produced after finishing the input signal processing and the main COSIS calculation. The COSIS.SUM file is the summary file of the COSIS results for the operator to recognize the core state effectively. The MAS S IG file is the COSISMAS input

  1. Level of Self-confidence among Female Students of Hail University in Saudi Arabia in Relationship with some Variables

    Directory of Open Access Journals (Sweden)

    Wedad Mohammad Saleh Alkferi

    2017-11-01

    Full Text Available This study aimed to detect the level of self-confidence among female students of Hail University, and whether there were significant differences at the level of the students' self-confidence attributed to the variables of age and specialization. The study sample, which was randomly selected, consisted of 802 students from various disciplines at the university (medicine, engineering, psychology, and Islamic culture enrolled for the second semester of the academic year (2015/2016. To achieve the objectives of the study a confidence Scale developed by Kawasmeh and Farah (1996. The scale was checked for its validity and reliability. The statistical package SPSS was used to extract the results. Results of the study revealed a low level of self-confidence for the students of the university, whereas there were no statistically significant differences due to the variables of age and specialization. Keywords: Self-confidence, Students of Hail University, Saudi Arabia, Some variables.

  2. Confidence in the long-term safety of deep geological repositories. Its development and communication

    International Nuclear Information System (INIS)

    1999-01-01

    The technical aspects of confidence have been the subject of considerable debate, especially the concept of model validation. The safety case that is provided at a particular stage in the planning, construction, operation or closure of a deep geological repository is a part of a broader decision basis that guides the repository-development process. The basic steps for deriving the safety case at various stages of repository development involve: a safety assessment; and the documentation of the safety assessment, a statement of confidence in the safety indicated by the assessment, and the confirmation of the appropriateness of the safety strategy. The approaches to establish confidence in the evaluation of safety should aim to ensure that the decisions taken within the incremental process of repository development are well-founded. Various aspects of confidence in the evaluation of safety, and their integration within a safety case, are presented in detail in the present report. When communicating confidence in the findings of a safety assessment, clarity in the communication of concepts is always required. Consistent with this requirement, key concepts are specifically defined in the main text of the report. (R.P.)

  3. Are multiple-trial experiments appropriate for eyewitness identification studies? Accuracy, choosing, and confidence across trials.

    Science.gov (United States)

    Mansour, J K; Beaudry, J L; Lindsay, R C L

    2017-12-01

    Eyewitness identification experiments typically involve a single trial: A participant views an event and subsequently makes a lineup decision. As compared to this single-trial paradigm, multiple-trial designs are more efficient, but significantly reduce ecological validity and may affect the strategies that participants use to make lineup decisions. We examined the effects of a number of forensically relevant variables (i.e., memory strength, type of disguise, degree of disguise, and lineup type) on eyewitness accuracy, choosing, and confidence across 12 target-present and 12 target-absent lineup trials (N = 349; 8,376 lineup decisions). The rates of correct rejections and choosing (across both target-present and target-absent lineups) did not vary across the 24 trials, as reflected by main effects or interactions with trial number. Trial number had a significant but trivial quadratic effect on correct identifications (OR = 0.99) and interacted significantly, but again trivially, with disguise type (OR = 1.00). Trial number did not significantly influence participants' confidence in correct identifications, confidence in correct rejections, or confidence in target-absent selections. Thus, multiple-trial designs appear to have minimal effects on eyewitness accuracy, choosing, and confidence. Researchers should thus consider using multiple-trial designs for conducting eyewitness identification experiments.

  4. The accuracy of meta-metacognitive judgments: regulating the realism of confidence.

    Science.gov (United States)

    Buratti, Sandra; Allwood, Carl Martin

    2012-08-01

    Can people improve the realism of their confidence judgments about the correctness of their episodic memory reports by deselecting the least realistic judgments? An assumption of Koriat and Goldsmith's (Psychol Rev 103:490-517, 1996) model is that confidence judgments regulate the reporting of memory reports. We tested whether this assumption generalizes to the regulation of the realism (accuracy) of confidence judgments. In two experiments, 270 adults in separate conditions answered 50 recognition and recall questions about the contents of a just-seen video. After each answer, they made confidence judgments about the answer's correctness. In Experiment 1, the participants in the recognition conditions significantly increased their absolute bias when they excluded 15 questions. In Experiment 2, the participants in the recall condition significantly improved their calibration. The results indicate that recall, more than recognition, offers valid cues for participants to increase the realism of their report. However, the effects were small with only weak support for the conclusion that people have some ability to regulate the realism in their confidence judgments.

  5. Validation of the Danish PAROLE lexicon (upubliceret)

    DEFF Research Database (Denmark)

    Møller, Margrethe; Christoffersen, Ellen

    2000-01-01

    This validation is based on the Danish PAROLE lexicon dated June 20, 1998, downloaded on March 16, 1999. Subsequently, the developers of the lexicon have informed us that they have been revising the lexicon, in particular the morphological level. Morphological entries were originally generated...... automatically from a machine-readable version of the Official Danish Spelling Dictionary (Retskrivningsordbogen 1986, in the following RO86), and this resulted in some overgeneration, which the developers started eliminating after submitting the Danish PAROLE lexicon for validation. The present validation is......, however, based on the January 1997 version of the lexicon. The validation as such complies with the specifications described in ELRA validation manuals for lexical data, i.e. Underwood and Navaretta: "A Draft Manual for the Validation of Lexica, Final Report" [Underwood & Navaretta1997] and Braasch: "A...

  6. A student manual for promoting mental health among high school students

    Directory of Open Access Journals (Sweden)

    Antonella Gigantesco

    2013-03-01

    Full Text Available OBJECTIVES. We describe a school program based on a student manual for promoting mental health and preventing mental illness. METHODS. A preliminary version of the manual was assessed for face validity by two focus groups. The final version was evaluated for acceptability among 253 students in 10 high schools and 1 middle school in Italy. RESULTS. The manual included 18 chapters (or "units" which address skills for enabling students to cope with their daily lives: communication skills, problem-solving, assertive skills, negotiation, stress management, anger management and conflict resolution. The manual was found to have been acceptable by high school students. CONCLUSIONS. The effectiveness of the manual in actually promoting mental health and preventing mental illness is currently being evaluated.

  7. A student manual for promoting mental health among high school students.

    Science.gov (United States)

    Gigantesco, Antonella; Del Re, Debora; Cascavilla, Isabella

    2013-01-01

    We describe a school program based on a student manual for promoting mental health and preventing mental illness. A preliminary version of the manual was assessed for face validity by two focus groups. The final version was evaluated for acceptability among 253 students in 10 high schools and 1 middle school in Italy. The manual included 18 chapters (or "units") which address skills for enabling students to cope with their daily lives: communication skills, problem-solving, assertive skills, negotiation, stress management, anger management and conflict resolution. The manual was found to have been acceptable by high school students. The effectiveness of the manual in actually promoting mental health and preventing mental illness is currently being evaluated.

  8. Pollution Microbiology, A Laboratory Manual.

    Science.gov (United States)

    Finstein, Melvin S.

    This manual is designed for use in the laboratory phase of courses dealing with microbial aspects of pollution. It attempts to cover the subject area broadly in four major categories: (1) microorganisms in clean and polluted waters, (2) carbonaceous pollutants, (3) nitrogen, phosphorus, iron, and sulfur as pollutants, and (4) sanitary…

  9. Chemistry laboratory safety manual available

    Science.gov (United States)

    Elsbrock, R. G.

    1968-01-01

    Chemistry laboratory safety manual outlines safe practices for handling hazardous chemicals and chemistry laboratory equipment. Included are discussions of chemical hazards relating to fire, health, explosion, safety equipment and procedures for certain laboratory techniques and manipulations involving glassware, vacuum equipment, acids, bases, and volatile solvents.

  10. Life Skills Coach Training Manual.

    Science.gov (United States)

    Saskatchewan NewStart, Inc., Prince Albert.

    Ways of helping coaches to counsel unemployed adults in the solving of their personal problems are explored in this manual. Originally printed as two separate volumes, this reprinting of the study has bound the two together. Volume I involves a general discussion of life's problems and of the need to solve them. This volume contains four parts.…

  11. PNNL Hoisting and Rigging Manual

    Energy Technology Data Exchange (ETDEWEB)

    Haynie, Todd O.; Fullmer, Michael W.

    2008-12-29

    This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

  12. Systematic Interviewing Skills. Typescript Manual.

    Science.gov (United States)

    Farley, Roy C.; Rubin, Stanford E.

    Part of a five-part package (see note) of training materials to teach interviewing skills to human services personnel, this typescript manual is intended for use as a visual reference to aid in understanding the taped dialogues of the packages tape/slide demonstrations of interview interaction, and for referral in class discussions. The typescript…

  13. Fluid Power, Rate Training Manual.

    Science.gov (United States)

    Bureau of Naval Personnel, Washington, DC.

    Fundamentals of hydraulics and pneumatics are presented in this manual, prepared for regular navy and naval reserve personnel who are seeking advancement to Petty Officer Third Class. The history of applications of compressed fluids is described in connection with physical principles. Selection of types of liquids and gases is discussed with a…

  14. COE1 Calorimeter Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Santi, Peter Angelo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-15

    The purpose of this manual is to describe the operations of the COE1 calorimeter which is used to measure the thermal power generated by the radioactive decay of plutonium-bearing materials for the purposes of assaying the amount of plutonium within the material.

  15. SES2D user's manual

    International Nuclear Information System (INIS)

    Johnson, J.D.; Lyon, S.P.

    1982-04-01

    SES2D is an interactive graphics code designed to generate plots of equation of state data from the Los Alamos National Laboratory Group T-4 computer libraries. This manual discusses the capabilities of the code. It describes the prompts and commands and illustrates their use with a sample run

  16. Sludge Digestion Manual; Handboek Slibgisting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-09-15

    This manual offers a guideline for developing, designing, optimizing and operating sludge digestion installations based on sewage sludge. It also offers tools for solving operation problems [Dutch] Het Handboek is een leidraad voor het ontwikkelen, ontwerpen, optimaliseren en bedrijven van slibgistingsinstallaties voor zuiveringsslib. Ook geeft het handvatten voor het oplossen van operationele problemen.

  17. Quality assurance manual: Volume 1

    International Nuclear Information System (INIS)

    Oijala, J.E.

    1988-06-01

    Stanford Linear Accelerator Center (SLAC) is a DOE-supported research facility that carries out experimental and theoretical research in high energy physics and developmental work in new techniques for particle acceleration and experimental instrumentation. The purpose of this manual is to describe SLAC quality assurance policies and practices in various parts of the Laboratory

  18. Eddy current manual, volume 2

    International Nuclear Information System (INIS)

    Cecco, V.S.; Van Drunen, G.; Sharp, F.L.

    1984-09-01

    This report on eddy current testing is divided into three sections: (a) Demonstration of Basic Principles, (b) Practical (Laboratory) Tests and, (c) Typical Certification Questions. It is intended to be used as a supplement to ΣEddy Current Manual, Volume 1Σ (AECL-7523) during CSNDT Foundation Level II and III courses

  19. Attrition Cost Model Instruction Manual

    Science.gov (United States)

    Yanagiura, Takeshi

    2012-01-01

    This instruction manual explains in detail how to use the Attrition Cost Model program, which estimates the cost of student attrition for a state's higher education system. Programmed with SAS, this model allows users to instantly calculate the cost of attrition and the cumulative attrition rate that is based on the most recent retention and…

  20. Summary Staging Manual 2000 - SEER

    Science.gov (United States)

    Access this manual of codes and coding instructions for the summary stage field for cases diagnosed 2001-2017. 2000 version applies to every anatomic site. It uses all information in the medical record. Also called General Staging, California Staging, and SEER Staging.

  1. National Radiobiology Archives Distributed Access User`s Manual, Version 1.1. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.K.; Prather, J.C.; Ligotke, E.K.; Watson, C.R.

    1992-06-01

    This supplement to the NRA Distributed Access User`s manual (PNL-7877), November 1991, describes installation and use of Version 1.1 of the software package; this is not a replacement of the previous manual. Version 1.1 of the NRA Distributed Access Package is a maintenance release. It eliminates several bugs, and includes a few new features which are described in this manual. Although the appearance of some menu screens has changed, we are confident that the Version 1.0 User`s Manual will provide an adequate introduction to the system. Users who are unfamiliar with Version 1.0 may wish to experiment with that version before moving on to Version 1.1.

  2. National Radiobiology Archives Distributed Access User's Manual, Version 1. 1

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.K.; Prather, J.C.; Ligotke, E.K.; Watson, C.R.

    1992-06-01

    This supplement to the NRA Distributed Access User's manual (PNL-7877), November 1991, describes installation and use of Version 1.1 of the software package; this is not a replacement of the previous manual. Version 1.1 of the NRA Distributed Access Package is a maintenance release. It eliminates several bugs, and includes a few new features which are described in this manual. Although the appearance of some menu screens has changed, we are confident that the Version 1.0 User's Manual will provide an adequate introduction to the system. Users who are unfamiliar with Version 1.0 may wish to experiment with that version before moving on to Version 1.1.

  3. Manual for reactor produced radioisotopes

    International Nuclear Information System (INIS)

    2003-01-01

    Radioisotopes find extensive applications in several fields including medicine, industry, agriculture and research. Radioisotope production to service different sectors of economic significance constitutes an important ongoing activity of many national nuclear programmes. Radioisotopes, formed by nuclear reactions on targets in a reactor or cyclotron, require further processing in almost all cases to obtain them in a form suitable for use. Specifications for final products and testing procedures for ensuring quality are also an essential part of a radioisotope production programme. The International Atomic Energy Agency (IAEA) has compiled and published such information before for the benefit of laboratories of Member States. The first compilation, entitled Manual of Radioisotope Production, was published in 1966 (Technical Reports Series No. 63). A more elaborate and comprehensive compilation, entitled Radioisotope Production and Quality Control, was published in 1971 (Technical Reports Series No. 128). Both served as useful reference sources for scientists working in radioisotope production worldwide. The 1971 publication has been out of print for quite some time. The IAEA convened a consultants meeting to consider the need for compiling an updated manual. The consultants recommended the publication of an updated manual taking the following into consideration: significant changes have taken place since 1971 in many aspects of radioisotope production; many radioisotopes have been newly introduced while many others have become gradually obsolete; considerable experience and knowledge have been gained in production of important radioisotopes over the years, which can be preserved through compilation of the manual; there is still a need for a comprehensive manual on radioisotope production methods for new entrants to the field, and as a reference. It was also felt that updating all the subjects covered in the 1971 manual at a time may not be practical considering the

  4. Understanding public confidence in government to prevent terrorist attacks.

    Energy Technology Data Exchange (ETDEWEB)

    Baldwin, T. E.; Ramaprasad, A,; Samsa, M. E.; Decision and Information Sciences; Univ. of Illinois at Chicago

    2008-04-02

    A primary goal of terrorism is to instill a sense of fear and vulnerability in a population and to erode its confidence in government and law enforcement agencies to protect citizens against future attacks. In recognition of its importance, the Department of Homeland Security includes public confidence as one of the principal metrics used to assess the consequences of terrorist attacks. Hence, a detailed understanding of the variations in public confidence among individuals, terrorist event types, and as a function of time is critical to developing this metric. In this exploratory study, a questionnaire was designed, tested, and administered to small groups of individuals to measure public confidence in the ability of federal, state, and local governments and their public safety agencies to prevent acts of terrorism. Data was collected from three groups before and after they watched mock television news broadcasts portraying a smallpox attack, a series of suicide bomber attacks, a refinery explosion attack, and cyber intrusions on financial institutions, resulting in identity theft. Our findings are: (a) although the aggregate confidence level is low, there are optimists and pessimists; (b) the subjects are discriminating in interpreting the nature of a terrorist attack, the time horizon, and its impact; (c) confidence recovery after a terrorist event has an incubation period; and (d) the patterns of recovery of confidence of the optimists and the pessimists are different. These findings can affect the strategy and policies to manage public confidence after a terrorist event.

  5. Animal Spirits and Extreme Confidence: No Guts, No Glory?

    NARCIS (Netherlands)

    M.G. Douwens-Zonneveld (Mariska)

    2012-01-01

    textabstractThis study investigates to what extent extreme confidence of either management or security analysts may impact financial or operating performance. We construct a multidimensional degree of company confidence measure from a wide range of corporate decisions. We empirically test this

  6. Trust, confidence, and the 2008 global financial crisis.

    Science.gov (United States)

    Earle, Timothy C

    2009-06-01

    The 2008 global financial crisis has been compared to a "once-in-a-century credit tsunami," a disaster in which the loss of trust and confidence played key precipitating roles and the recovery from which will require the restoration of these crucial factors. Drawing on the analogy between the financial crisis and environmental and technological hazards, recent research on the role of trust and confidence in the latter is used to provide a perspective on the former. Whereas "trust" and "confidence" are used interchangeably and without explicit definition in most discussions of the financial crisis, this perspective uses the TCC model of cooperation to clearly distinguish between the two and to demonstrate how this distinction can lead to an improved understanding of the crisis. The roles of trust and confidence-both in precipitation and in possible recovery-are discussed for each of the three major sets of actors in the crisis, the regulators, the banks, and the public. The roles of trust and confidence in the larger context of risk management are also examined; trust being associated with political approaches, confidence with technical. Finally, the various stances that government can take with regard to trust-such as supportive or skeptical-are considered. Overall, it is argued that a clear understanding of trust and confidence and a close examination of the specific, concrete circumstances of a crisis-revealing when either trust or confidence is appropriate-can lead to useful insights for both recovery and prevention of future occurrences.

  7. True and False Memories, Parietal Cortex, and Confidence Judgments

    Science.gov (United States)

    Urgolites, Zhisen J.; Smith, Christine N.; Squire, Larry R.

    2015-01-01

    Recent studies have asked whether activity in the medial temporal lobe (MTL) and the neocortex can distinguish true memory from false memory. A frequent complication has been that the confidence associated with correct memory judgments (true memory) is typically higher than the confidence associated with incorrect memory judgments (false memory).…

  8. The Metamemory Approach to Confidence: A Test Using Semantic Memory

    Science.gov (United States)

    Brewer, William F.; Sampaio, Cristina

    2012-01-01

    The metamemory approach to memory confidence was extended and elaborated to deal with semantic memory tasks. The metamemory approach assumes that memory confidence is based on the products and processes of a completed memory task, as well as metamemory beliefs that individuals have about how their memory products and processes relate to memory…

  9. Confidence Sharing in the Vocational Counselling Interview: Emergence and Repercussions

    Science.gov (United States)

    Olry-Louis, Isabelle; Bremond, Capucine; Pouliot, Manon

    2012-01-01

    Confidence sharing is an asymmetrical dialogic episode to which both parties consent, in which one reveals something personal to the other who participates in the emergence and unfolding of the confidence. We describe how this is achieved at a discursive level within vocational counselling interviews. Based on a corpus of 64 interviews, we analyse…

  10. Confidence Scoring of Speaking Performance: How Does Fuzziness become Exact?

    Science.gov (United States)

    Jin, Tan; Mak, Barley; Zhou, Pei

    2012-01-01

    The fuzziness of assessing second language speaking performance raises two difficulties in scoring speaking performance: "indistinction between adjacent levels" and "overlap between scales". To address these two problems, this article proposes a new approach, "confidence scoring", to deal with such fuzziness, leading to "confidence" scores between…

  11. Monitoring consumer confidence in food safety: an exploratory study

    NARCIS (Netherlands)

    Jonge, de J.; Frewer, L.J.; Trijp, van J.C.M.; Renes, R.J.; Wit, de W.; Timmers, J.C.M.

    2004-01-01

    Abstract: In response to the potential for negative economic and societal effects resulting from a low level of consumer confidence in food safety, it is important to know how confidence is potentially influenced by external events. The aim of this article is to describe the development of a monitor

  12. Modeling Confidence and Response Time in Recognition Memory

    Science.gov (United States)

    Ratcliff, Roger; Starns, Jeffrey J.

    2009-01-01

    A new model for confidence judgments in recognition memory is presented. In the model, the match between a single test item and memory produces a distribution of evidence, with better matches corresponding to distributions with higher means. On this match dimension, confidence criteria are placed, and the areas between the criteria under the…

  13. Music educators : their artistry and self-confidence

    NARCIS (Netherlands)

    Lion-Slovak, Brigitte; Stöger, Christine; Smilde, Rineke; Malmberg, Isolde; de Vugt, Adri

    2013-01-01

    How does artistic identity influence the self-confidence of music educators? What is the interconnection between the artistic and the teacher identity? What is actually meant by artistic identity in music education? What is a fruitful environment for the development of artistic self-confidence of

  14. To protect and serve: Restoring public confidence in the SAPS ...

    African Journals Online (AJOL)

    Persistent incidents of brutality, criminal behaviour and abuse of authority by members of South Africa's police agencies have serious implications for public trust and confidence in the police. A decline in trust and confidence in the police is inevitably harmful to the ability of the government to reduce crime and improve public ...

  15. Confidence bounds for normal and lognormal distribution coefficients of variation

    Science.gov (United States)

    Steve Verrill

    2003-01-01

    This paper compares the so-called exact approach for obtaining confidence intervals on normal distribution coefficients of variation to approximate methods. Approximate approaches were found to perform less well than the exact approach for large coefficients of variation and small sample sizes. Web-based computer programs are described for calculating confidence...

  16. Improved realism of confidence for an episodic memory event

    Directory of Open Access Journals (Sweden)

    Sandra Buratti

    2012-09-01

    Full Text Available We asked whether people can make their confidence judgments more realistic (accurate by adjusting them, with the aim of improving the relationship between the level of confidence and the correctness of the answer. This adjustment can be considered to include a so-called second-order metacognitive judgment. The participants first gave confidence judgments about their answers to questions about a video clip they had just watched. Next, they attempted to increase their accuracy by identifying confidence judgments in need of adjustment and then modifying them. The participants managed to increase their metacognitive realism, thus decreasing their absolute bias and improving their calibration, although the effects were small. We also examined the relationship between confidence judgments that were adjusted and the retrieval fluency and the phenomenological memory quality participants experienced when first answering the questions; this quality was one of either Remember (associated with concrete, vivid details or Know (associated with a feeling of familiarity. Confidence judgments associated with low retrieval fluency and the memory quality of knowing were modified more often. In brief, our results provide evidence that people can improve the realism of their confidence judgments, mainly by decreasing their confidence for incorrect answers. Thus, this study supports the conclusion that people can perform successful second-order metacognitive judgments.

  17. Variance misperception explains illusions of confidence in simple perceptual decisions

    NARCIS (Netherlands)

    Zylberberg, Ariel; Roelfsema, Pieter R.; Sigman, Mariano

    2014-01-01

    Confidence in a perceptual decision is a judgment about the quality of the sensory evidence. The quality of the evidence depends not only on its strength ('signal') but critically on its reliability ('noise'), but the separate contribution of these quantities to the formation of confidence judgments

  18. A simultaneous confidence band for sparse longitudinal regression

    KAUST Repository

    Ma, Shujie; Yang, Lijian; Carroll, Raymond J.

    2012-01-01

    Functional data analysis has received considerable recent attention and a number of successful applications have been reported. In this paper, asymptotically simultaneous confidence bands are obtained for the mean function of the functional regression model, using piecewise constant spline estimation. Simulation experiments corroborate the asymptotic theory. The confidence band procedure is illustrated by analyzing CD4 cell counts of HIV infected patients.

  19. Manual dexterity aptitude testing: a soap carving study.

    Science.gov (United States)

    Tang, Christopher G; Hilsinger, Raymond L; Cruz, Raul M; Schloegel, Luke J; Byl, Fred M; Rasgon, Barry M

    2014-03-01

    Currently there are few validated metrics for predicting surgical skill among otolaryngology residency applicants. To determine whether manual dexterity aptitude testing in the form of soap carving during otolaryngology residency interviews at Kaiser Permanente Medical Center Oakland predicts surgical skill at the time of graduation from otolaryngology residency programs. This study was conducted to determine how applicants with the best and worst soap carvings compared at the time of graduation with respect to various metrics including visuospatial ability and manual dexterity. Over the last 25 years, applicants to the residency program at Kaiser Permanente Oakland were required to carve soap during their residency interview. The 3 best and 3 worst soap carvings from 1990 through 2006 were determined. Of the individuals who carved those soaps, 62 qualified for the study and matriculated into otolaryngology residency programs. Surveys were sent to the 62 individuals' residency programs to evaluate those individuals on a 5-point Likert scale in various categories as well as to rank those individuals as being in the top 50% or bottom 50% of their graduating class. All else being equal, we hypothesized that applicants who had the manual dexterity and visuospatial skills to accurately carve a bar of soap would more likely possess the skills necessary to become a good surgeon. There was no difference between individuals with the best soap carvings and those with the worst soap carvings in all categories: cognitive knowledge, visuospatial ability, manual dexterity, decision making, and overall score (P > .10 for all categories). There was a 95% response rate, with 35 of 37 residency programs responding and 59 of 62 surveys returned. Manual dexterity aptitude testing in the form of soap carving does not appear to correlate with surgical skill at the time of graduation. Further studies need to be conducted to determine the role of manual dexterity and visuospatial

  20. What are effective techniques for improving public confidence or restoring lost confidence in a regulator?

    International Nuclear Information System (INIS)

    Harbitz, O.; Isaksson, R.

    2006-01-01

    The conclusions and recommendations of this session can be summarized this way. The following list contains thoughts related to restoring lost confidence: - hard, long lasting event; - strategy: maximum transparency; - to listen, be open, give phone numbers etc. - ways to rebuild trust: frequent communication, being there, open and transparent; - don't be too defensive; if things could be done better, say it; - technical staff and public affair staff together from the beginning - answer all questions; - classifications, actions, instructions that differ much from the earlier ones must be well explained and motivated - and still cause a lot of problems; - things may turn out to be political; - communicative work in an early stage saves work later; - communication experts must be working shoulder to shoulder with other staff; On handling emergencies in general, some recipes proposed are: - better to over react than to under react; - do not avoid extreme actions: hit hard, hit fast; - base your decisions in strict principles; - first principle: public safety first; - when you are realizing plant A, you must have a plant B in your pocket: - be transparent - from the beginning; - crisis communication: early, frequent etc - people need to see political leaders, someone who is making decisions - technical experts are needed but are not enough. On how to involve stakeholders and the public in decision making, recommendations are: - new kind of thinking -. demanding for a organisation; - go to local level, meet local people, speak language people understand, you have to start from the very beginning - introducing yourself tell who you are and why you are there. (authors)

  1. Family Health Histories and Their Impact on Retirement Confidence.

    Science.gov (United States)

    Zick, Cathleen D; Mayer, Robert N; Smith, Ken R

    2015-08-01

    Retirement confidence is a key social barometer. In this article, we examine how personal and parental health histories relate to working-age adults' feelings of optimism or pessimism about their overall retirement prospects. This study links survey data on retirement planning with information on respondents' own health histories and those of their parents. The multivariate models control for the respondents' socio-demographic and economic characteristics along with past retirement planning activities when estimating the relationships between family health histories and retirement confidence. Retirement confidence is inversely related to parental history of cancer and cardiovascular disease but not to personal health history. In contrast, retirement confidence is positively associated with both parents being deceased. As members of the public become increasingly aware of how genetics and other family factors affect intergenerational transmission of chronic diseases, it is likely that the link between family health histories and retirement confidence will intensify. © The Author(s) 2015.

  2. Multivoxel neurofeedback selectively modulates confidence without changing perceptual performance

    Science.gov (United States)

    Cortese, Aurelio; Amano, Kaoru; Koizumi, Ai; Kawato, Mitsuo; Lau, Hakwan

    2016-01-01

    A central controversy in metacognition studies concerns whether subjective confidence directly reflects the reliability of perceptual or cognitive processes, as suggested by normative models based on the assumption that neural computations are generally optimal. This view enjoys popularity in the computational and animal literatures, but it has also been suggested that confidence may depend on a late-stage estimation dissociable from perceptual processes. Yet, at least in humans, experimental tools have lacked the power to resolve these issues convincingly. Here, we overcome this difficulty by using the recently developed method of decoded neurofeedback (DecNef) to systematically manipulate multivoxel correlates of confidence in a frontoparietal network. Here we report that bi-directional changes in confidence do not affect perceptual accuracy. Further psychophysical analyses rule out accounts based on simple shifts in reporting strategy. Our results provide clear neuroscientific evidence for the systematic dissociation between confidence and perceptual performance, and thereby challenge current theoretical thinking. PMID:27976739

  3. Maternal Confidence for Physiologic Childbirth: A Concept Analysis.

    Science.gov (United States)

    Neerland, Carrie E

    2018-06-06

    Confidence is a term often used in research literature and consumer media in relation to birth, but maternal confidence has not been clearly defined, especially as it relates to physiologic labor and birth. The aim of this concept analysis was to define maternal confidence in the context of physiologic labor and childbirth. Rodgers' evolutionary method was used to identify attributes, antecedents, and consequences of maternal confidence for physiologic birth. Databases searched included Ovid MEDLINE, CINAHL, PsycINFO, and Sociological Abstracts from the years 1995 to 2015. A total of 505 articles were retrieved, using the search terms pregnancy, obstetric care, prenatal care, and self-efficacy and the keyword confidence. Articles were identified for in-depth review and inclusion based on whether the term confidence was used or assessed in relationship to labor and/or birth. In addition, a hand search of the reference lists of the selected articles was performed. Twenty-four articles were reviewed in this concept analysis. We define maternal confidence for physiologic birth as a woman's belief that physiologic birth can be achieved, based on her view of birth as a normal process and her belief in her body's innate ability to birth, which is supported by social support, knowledge, and information founded on a trusted relationship with a maternity care provider in an environment where the woman feels safe. This concept analysis advances the concept of maternal confidence for physiologic birth and provides new insight into how women's confidence for physiologic birth might be enhanced during the prenatal period. Further investigation of confidence for physiologic birth across different cultures is needed to identify cultural differences in constructions of the concept. © 2018 by the American College of Nurse-Midwives.

  4. 21 CFR 872.6855 - Manual toothbrush.

    Science.gov (United States)

    2010-04-01

    ... remove adherent plaque and food debris from the teeth to reduce tooth decay. (b) Classification. Class I... DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6855 Manual toothbrush. (a) Identification. A manual...

  5. 21 CFR 868.1030 - Manual algesimeter.

    Science.gov (United States)

    2010-04-01

    ... DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1030 Manual algesimeter. (a) Identification. A manual algesimeter is a mechanical device intended to determine a patient's sensitivity to pain after...

  6. Gravel Roads: Maintenance and Design Manual

    Science.gov (United States)

    This manual was developed with a major emphasis on the maintenance of gravel roads, including some basic design elements. The purpose of the manual is to provide clear and helpful information for doing a better job of maintaining gravel roads.

  7. Users Manual for the FEHMN application

    International Nuclear Information System (INIS)

    Zyvoloski, G.A.; Robinson, B.A.; Dash, Z.V.; Trease, L.L.

    1996-01-01

    The user's manual documents the use of the Yucca Mountain Site Characterization Projects Finite element heat and mass transfer code (FEHMN) application. The manual covers: Program considerations, data files, input data, output, system interface, and examples

  8. Radiological control technician: Training program management manual

    International Nuclear Information System (INIS)

    1992-10-01

    This manual defines and describes the DOE Radiological Control Technician Core Training Program qualification and training process, material development requirements, standards and policies, and administration. The manual applies to Radiological Control Technician Training Programs at all DOE contractor sites

  9. US Department of Energy Radiological Control Manual

    International Nuclear Information System (INIS)

    1992-06-01

    This manual establishes practices for the conduct of radiological control activities. The Manual states DOE's positions and views on the best courses of action currently available in the area of radiological controls. Accordingly, the provisions in the Manual should be viewed by contractors as an acceptable technique, method or solution for fulfilling their duties and responsibilities. This Manual shall be used by DOE in evaluating the performance of its contractors. (VC)

  10. Psychometric properties of the Confidence and Trust in Delivery Questionnaire (CTDQ: a pilot study

    Directory of Open Access Journals (Sweden)

    Jeschke Elke

    2012-09-01

    Full Text Available Abstract Background Assessing expecting mother’s opinions prior to birth draws a comprehensive picture for the caregivers about their emotional state and their expectations. Some questionnaires to cover these aspects do exist. This study aims to present the psychometric properties of a new instrument, the Confidence and Trust in Delivery Questionnaire (CDTQ a short but reliable a self-report instrument that focuses on confidence and trust as meaningful dimensions for expectant mothers. Methods A pilot validation study of 221 women 6 weeks before childbirth was conducted in Germany between October 2007 and June 2008. To detect structural relations between the items, factor and reliability analyses were applied to the CTDQ items. Factor analysis was performed by means of principal components analysis and varimax rotation. Internal reliability was assessed by Cronbach’s alpha. External validation was performed using the sense of coherence (SOC scale. Results The CTDQ comprises of 11 items. We found a 4-factor structure. The internal consistency of the whole item pool (Cronbach’s α = 0.79 and the 4 subscales [confidence in labor (α = 0.82; partner’s support (α = 0.62; trust in medical competency (α = 0.68; being informed (α = 0.60] can be regarded as sufficient or even excellent. The 4 factors explained 69.6% of total variance. Except for a high intercorrelation (0.70 between “partner’s support” and “trust in medical competence”, the subscales show low intercorrelations, indicating an adequate independence of the respective subscales. Regarding the external validity we found minor respective moderate correlations with the SOC scale. Conclusions Our data suggest that the CTDQ is a useful instrument to assess confidence and trust in delivery. With 4 clinically relevant dimensions, the CTDQ is now open for further studies in the field of labor.

  11. Groundwater Model Validation

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed E. Hassan

    2006-01-24

    Models have an inherent uncertainty. The difficulty in fully characterizing the subsurface environment makes uncertainty an integral component of groundwater flow and transport models, which dictates the need for continuous monitoring and improvement. Building and sustaining confidence in closure decisions and monitoring networks based on models of subsurface conditions require developing confidence in the models through an iterative process. The definition of model validation is postulated as a confidence building and long-term iterative process (Hassan, 2004a). Model validation should be viewed as a process not an end result. Following Hassan (2004b), an approach is proposed for the validation process of stochastic groundwater models. The approach is briefly summarized herein and detailed analyses of acceptance criteria for stochastic realizations and of using validation data to reduce input parameter uncertainty are presented and applied to two case studies. During the validation process for stochastic models, a question arises as to the sufficiency of the number of acceptable model realizations (in terms of conformity with validation data). Using a hierarchical approach to make this determination is proposed. This approach is based on computing five measures or metrics and following a decision tree to determine if a sufficient number of realizations attain satisfactory scores regarding how they represent the field data used for calibration (old) and used for validation (new). The first two of these measures are applied to hypothetical scenarios using the first case study and assuming field data consistent with the model or significantly different from the model results. In both cases it is shown how the two measures would lead to the appropriate decision about the model performance. Standard statistical tests are used to evaluate these measures with the results indicating they are appropriate measures for evaluating model realizations. The use of validation

  12. Radiology Aide. Instructor Key [and] Student Manual.

    Science.gov (United States)

    Hartwein, Jon; Dunham, John

    This manual can be used independently by students in secondary health occupations programs or by persons receiving on-the-job training in a radiology department. The manual includes an instructor's key that provides answers to the activity sheets and unit evaluations. The manual consists of the following five units: (1) orientation to radiology;…

  13. Reconceptualising manual therapy skills in contemporary practice

    DEFF Research Database (Denmark)

    Rabey, Martin; Hall, Toby; Hebron, Clair

    2017-01-01

    With conflicting evidence regarding the effectiveness of manual therapy calls have arisen within some quarters of the physiotherapy profession challenging the continued use of manual skills for assessment and treatment. A reconceptualisation of the importance of manual examination findings is put...

  14. 25 CFR 175.5 - Operations manual.

    Science.gov (United States)

    2010-04-01

    ... Provisions § 175.5 Operations manual. (a) The Area Director shall establish an operations manual for the... Director shall amend the operations manual as needed. (b) The public shall be notified by the Area Director... shall be published in local newspaper(s) of general circulation, posted at the utility office(s), and...

  15. AFM-CMM integrated instrument user manual

    DEFF Research Database (Denmark)

    Marinello, Francesco; Bariani, Paolo

    This manual gives general important guidelines for a proper use of the integrated AFM-CMM instrument. More information can be collected reading: • N. Kofod Ph.D thesis [1]; • P. Bariani Ph.D thesis [2]; • Dualscope DME 95-200 operation manuals [3]; • SPIP help [4] • Stitching software user manual...

  16. Disconnections Between Teacher Expectations and Student Confidence in Bioethics

    Science.gov (United States)

    Hanegan, Nikki L.; Price, Laura; Peterson, Jeremy

    2008-09-01

    This study examines how student practice of scientific argumentation using socioscientific bioethics issues affects both teacher expectations of students’ general performance and student confidence in their own work. When teachers use bioethical issues in the classroom students can gain not only biology content knowledge but also important decision-making skills. Learning bioethics through scientific argumentation gives students opportunities to express their ideas, formulate educated opinions and value others’ viewpoints. Research has shown that science teachers’ expectations of student success and knowledge directly influence student achievement and confidence levels. Our study analyzes pre-course and post-course surveys completed by students enrolled in a university level bioethics course ( n = 111) and by faculty in the College of Biology and Agriculture faculty ( n = 34) based on their perceptions of student confidence. Additionally, student data were collected from classroom observations and interviews. Data analysis showed a disconnect between faculty and students perceptions of confidence for both knowledge and the use of science argumentation. Student reports of their confidence levels regarding various bioethical issues were higher than faculty reports. A further disconnect showed up between students’ preferred learning styles and the general faculty’s common teaching methods; students learned more by practicing scientific argumentation than listening to traditional lectures. Students who completed a bioethics course that included practice in scientific argumentation, significantly increased their confidence levels. This study suggests that professors’ expectations and teaching styles influence student confidence levels in both knowledge and scientific argumentation.

  17. Sex differences in confidence influence patterns of conformity.

    Science.gov (United States)

    Cross, Catharine P; Brown, Gillian R; Morgan, Thomas J H; Laland, Kevin N

    2017-11-01

    Lack of confidence in one's own ability can increase the likelihood of relying on social information. Sex differences in confidence have been extensively investigated in cognitive tasks, but implications for conformity have not been directly tested. Here, we tested the hypothesis that, in a task that shows sex differences in confidence, an indirect effect of sex on social information use will also be evident. Participants (N = 168) were administered a mental rotation (MR) task or a letter transformation (LT) task. After providing an answer, participants reported their confidence before seeing the responses of demonstrators and being allowed to change their initial answer. In the MR, but not the LT, task, women showed lower levels of confidence than men, and confidence mediated an indirect effect of sex on the likelihood of switching answers. These results provide novel, experimental evidence that confidence is a general explanatory mechanism underpinning susceptibility to social influences. Our results have implications for the interpretation of the wider literature on sex differences in conformity. © 2016 The British Psychological Society.

  18. Doubly Bayesian Analysis of Confidence in Perceptual Decision-Making.

    Science.gov (United States)

    Aitchison, Laurence; Bang, Dan; Bahrami, Bahador; Latham, Peter E

    2015-10-01

    Humans stand out from other animals in that they are able to explicitly report on the reliability of their internal operations. This ability, which is known as metacognition, is typically studied by asking people to report their confidence in the correctness of some decision. However, the computations underlying confidence reports remain unclear. In this paper, we present a fully Bayesian method for directly comparing models of confidence. Using a visual two-interval forced-choice task, we tested whether confidence reports reflect heuristic computations (e.g. the magnitude of sensory data) or Bayes optimal ones (i.e. how likely a decision is to be correct given the sensory data). In a standard design in which subjects were first asked to make a decision, and only then gave their confidence, subjects were mostly Bayes optimal. In contrast, in a less-commonly used design in which subjects indicated their confidence and decision simultaneously, they were roughly equally likely to use the Bayes optimal strategy or to use a heuristic but suboptimal strategy. Our results suggest that, while people's confidence reports can reflect Bayes optimal computations, even a small unusual twist or additional element of complexity can prevent optimality.

  19. Explicating Validity

    Science.gov (United States)

    Kane, Michael T.

    2016-01-01

    How we choose to use a term depends on what we want to do with it. If "validity" is to be used to support a score interpretation, validation would require an analysis of the plausibility of that interpretation. If validity is to be used to support score uses, validation would require an analysis of the appropriateness of the proposed…

  20. Confidence in Alternative Dispute Resolution: Experience from Switzerland

    Directory of Open Access Journals (Sweden)

    Christof Schwenkel

    2014-06-01

    Full Text Available Alternative Dispute Resolution plays a crucial role in the justice system of Switzerland. With the unified Swiss Code of Civil Procedure, it is required that each litigation session shall be preceded by an attempt at conciliation before a conciliation authority. However, there has been little research on conciliation authorities and the public's perception of the authorities. This paper looks at public confidence in conciliation authorities and provides results of a survey conducted with more than 3,400 participants. This study found that public confidence in Swiss conciliation authorities is generally high, exceeds the ratings for confidence in cantonal governments and parliaments, but is lower than confidence in courts.Since the institutional models of the conciliation authorities (meaning the organization of the authorities and the selection of the conciliators differ widely between the 26 Swiss cantons, the influence of the institutional models on public confidence is analyzed. Contrary to assumptions based on New Institutional-ism approaches, this study reports that the institutional models do not impact public confidence. Also, the relationship between a participation in an election of justices of the peace or conciliators and public confidence in these authorities is found to be at most very limited (and negative. Similar to common findings on courts, the results show that general contacts with conciliation authorities decrease public confidence in these institutions whereas a positive experience with a conciliation authority leads to more confidence.The Study was completed as part of the research project 'Basic Research into Court Management in Switzerland', supported by the Swiss National Science Foundation (SNSF. Christof Schwenkel is a PhD student at the University of Lucerne and a research associate and project manager at Interface Policy Studies. A first version of this article was presented at the 2013 European Group for Public