Isotopes in environmental studies - Aquatic Forum 2004. Proceedings of an international conference. Unedited papers

International Nuclear Information System (INIS)

2006-01-01

A better understanding of key processes in the aquatic environment, responsible for its future development and its protection, were at the forefront of the IAEA's International Conference on Isotopes in Environmental Studies - AQUATIC FORUM 2004 convened in Monaco from 25 to 29 October 2004, which was the most important gathering of the year of isotope environmental scientists. Over 320 experts from 60 IAEA Member States and 6 international organizations delivered 185 oral presentations in 6 plenary and 31 parallel sessions and made 130 poster presentations. The conference reviewed the present state of the art isotopic methods for investigation of the aquatic environment. The main conference subjects considered were: (i) behaviour, transport and distribution of isotopes in the aquatic environment; (ii) climate change studies using isotopic records in the marine environment; (iii) groundwater dynamics, modelling and management of freshwater sources; (iv) important global projects, such as WOCE, WOMARS, SHOTS, GEOTRACES; (v) joint IAEA-UNESCO submarine groundwater investigations in the Mediterranean Sea, the Southwest Atlantic and Pacific Oceans; (vi) new trends in radioecological investigations, concentrating on the protection of marine biota against radioactive contamination; (vii) transfers in analytical technologies from bulk analyses to particle and compound specific analyses of environmental samples; (viii) development of new isotopic techniques, such as AMS and ICPMS, and their successful applications in environmental studies; and many other exciting topics which were presented and discussed during the Conference. Four workshops were held simultaneously: - ATOMS-Med Workshop - development of a project proposal for oceanographic investigations in the Eastern Mediterranean. - El Nino - Research Co-ordination Meeting of the new IAEA Coordinated Research Project investigating climate change using isotopic records in the marine environment. - CELLAR Workshop

2004 Molecular Basis of Microbial One-Carbon Metabolism Gordon Conference - August 1-6, 2004

Energy Technology Data Exchange (ETDEWEB)

Joseph A. Krzycki

2005-09-15

The Gordon Research Conference (GRC) on 2004 Molecular Basis of Microbial One-Carbon Metabolism Gordon Conference - August 1-6, 2004 was held at Mount Holyoke College, South Hadley, MA from August 1-6, 2004. The Conference was well-attended with 117 participants (attendees list attached). The attendees represented the spectrum of endeavor in this field coming from academia, industry, and government laboratories, both U.S. and foreign scientists, senior researchers, young investigators, and students. In designing the formal speakers program, emphasis was placed on current unpublished research and discussion of the future target areas in this field. There was a conscious effort to stimulate lively discussion about the key issues in the field today. Time for formal presentations was limited in the interest of group discussions. In order that more scientists could communicate their most recent results, poster presentation time was scheduled. Attached is a copy of the formal schedule and speaker program and the poster program. In addition to these formal interactions, 'free time' was scheduled to allow informal discussions. Such discussions are fostering new collaborations and joint efforts in the field.

Cisco ASM Router

CERN Multimedia

2001-01-01

One of the two "ASM/2-32EM" boxes installed in 1988, from "Cisco Systems Inc." - then an unknown 20-employee company in Menlo Park, California (USA). This is one of the first two Cisco boxes to appear in Switzerland, and possibly Europe. The 220v power supply was a special modification made for use at CERN. They supported IP address filtering, which seemed just what CERN needed to help protect the new Cray XMP-48 super computer from network hackers. The two ASM boxes were both routers and terminal servers. They protected a secure private Ethernet segment used by the Cray project, as well as providing secure terminal connections to that segment, including CERN's first dialback terminal service, which allowed Cray and CERN system analysts to work on the machine from home, using another Cisco feature called TACACS. (Kindly offered by B. Segal who discovered this company while at a Usenix Conference in Phoenix, Arizona in June 1987.)

Towards a greener world : hydrogen and fuel cells 2004 conference and trade show. Conference proceedings

International Nuclear Information System (INIS)

2004-01-01

Fuel Cells Canada and the Canadian Hydrogen Association hosted the Hydrogen and Fuel Cells 2004 Conference and Tradeshow in Toronto, Ontario, Canada on September 25-28, 2004. Industry leaders from around the world showcased the latest developments in fuel cell and hydrogen technology, and shared research breakthroughs. The conference focussed on many aspects of hydrogen and fuel cell technology, specifically: hydrogen technology progress, including storage, infrastructure and production; fuel cells, including quality, cost and applications; economics and policy, including government and industry strategies; fuel cell demonstrations, including transportation, micro-fuel cells, and portable power; and, impact on climate change, including health and the Kyoto Accord

Risk assessment, session 1-4. International conference 1992. Part 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-07-01

The international conference on Risk Assessment, 5-9 October 1992, London was organised by the Health and Safety Commission of the UK and co-sponsored by a number of regional and international organizations namely: the European Commission, the ILO, the OECD and WHO. The main sessions of the conference cover what risk assessment means, the role of risk assessment in devising policies and regulations; and risk assessment in practice.

Risk assessment, session 1-4. International conference 1992. Part 1

International Nuclear Information System (INIS)

1992-01-01

The international conference on Risk Assessment, 5-9 October 1992, London was organised by the Health and Safety Commission of the UK and co-sponsored by a number of regional and international organizations namely: the European Commission, the ILO, the OECD and WHO. The main sessions of the conference cover what risk assessment means, the role of risk assessment in devising policies and regulations; and risk assessment in practice

2004 Annual Scientific Conference. Program and Abstracts

International Nuclear Information System (INIS)

Barborica, Andrei; Bulinski, Mircea; Stefan, Sabina

2005-01-01

As consequence of a long experience in educational as well as research field the Physics Department of the Bucharest University is offering high-standard undergraduate and graduate programs of higher education in physical sciences. The long-term strategy adopted by the faculty was focused on developing scientific research in modern topics of theoretical, experimental and applied physics as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of environment, physics-computer science. Following this strategy the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to approach modern and competitive research projects. Every year the Physics Department of the University of Bucharest organizes the 'Annual Scientific Conference' to present the most interesting scientific results, obtained within the department. This 2004 scientific session is opened also to the interested physics researchers from other institutes and universities in the country. This scientific event represents a recognition and a continuation of the prestigious tradition of physics research performed within University. The scientific research in the Physics Department is performed in groups and research centers, the terminal year undergraduate students and graduate students being involved in a high extent in the research works. There are 5 research centers with the status of Center of excellence in research. The long-term strategy adopted by the faculty was focused on developing the scientific research in modern topics of theoretical, experimental and applied physics, as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of the environment, physics - computer science. Following this strategy, the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to perform modern

Proceedings of the Seventh Radiation Physics and Protection Conference (RPC-2004)

International Nuclear Information System (INIS)

2005-04-01

The Conference of radiation physics and protection was held on 27-30 November, 2004 in Egypt. the specialists discussed radiation physics and protection, fundamental radiation physics and application, Natural and man made radiation sources and radiation measurements, radiation protection and environmental, applied radiation physics, physics in medicine and biology were disscused at the conference. More than 800 papers were presented in the conference

A Retrospective Look at 20 Years of ASM Education Programs (1990-2010 and a Prospective Look at the Next 20 Years (2011-2030

Directory of Open Access Journals (Sweden)

Amy Chang

2011-03-01

Full Text Available The Education Board of the American Society for Microbiology (ASM was established in the mid-1970s to address the graduate and medical education needs of ASM members. Since then, I have watched our offerings evolve from a small, graduate-level travel grant program for ASM meetings to a growing suite of professional development and networking opportunities including fellowships, publications, and conferences. Along the way, our audience has expanded from  graduate students to undergraduate biology and K-12 teachers, students of all ages, researchers, and the public.I have been fortunate enough to watch several pivotal programs and projects support our growth and change the status quo by providing opportunities for biology educators to flourish. These include the: (i Coalition for Education in the Life Sciences, (ii ASM Division on Microbiology Education, (iii ASM Conference for Undergraduate Educators, (iv ASM Journal of Microbiology & Biology Education, and (v ASM Fellowship Fund. In this review, the background and details I offer on each initiative help explain ASM Education offerings, how our growth has been supported, and where are we headed.

International conference on isotopes in environmental studies - Aquatic Forum 2004. Book of extended synopses

International Nuclear Information System (INIS)

2004-01-01

The International Conference on Isotopes in Environmental Studies: AQUATIC FORUM 2004, organized by the International Atomic Energy Agency (IAEA) was held in Monte-Carlo, Monaco, 25-29 October 2004. The principal objective of the Conference was to review recent achievements in the use of isotopic techniques to study marine and terrestrial environmental processes, transport of contaminants in the aquatic environment, climate change, computer modelling of environmental processes, present state of the art of isotopic techniques, data validation and syntheses, and the development of geographical information systems. This publication contains the extended synopses of presentations at the Conference

International conference on isotopes in environmental studies - Aquatic Forum 2004. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The International Conference on Isotopes in Environmental Studies: AQUATIC FORUM 2004, organized by the International Atomic Energy Agency (IAEA) was held in Monte-Carlo, Monaco, 25-29 October 2004. The principal objective of the Conference was to review recent achievements in the use of isotopic techniques to study marine and terrestrial environmental processes, transport of contaminants in the aquatic environment, climate change, computer modelling of environmental processes, present state of the art of isotopic techniques, data validation and syntheses, and the development of geographical information systems. This publication contains the extended synopses of presentations at the Conference.

The 68th Session of the International Labour Conference, June 1982.

Science.gov (United States)

International Labour Review, 1982

1982-01-01

This year's session adopted new standards such as maintenance of migrant workers' social security rights, protection of workers against unjustified dismissal, and vocational rehabilitation. This article describes the conference's examination of these technical agenda items, and its annual review of the application of Conventions and…

Forum Engelberg, 1-4 March 2004

CERN Document Server

2004-01-01

The 2004 Forum Engelberg will pay tribute to its President, Hubert Curien, a former President of the CERN Council and former French Minister for Research. The subject of this year's conference, which will take place in Lucerne from 1st to 4th March 2004, is "Science on the Agenda of European Politics." This year, there will be talks by numerous speakers, including the directors of the seven European intergovernmental scientific organisations (EIROforum) and the European Commissioner for Research, Philippe Busquin. The highlights of the conference will include an Interdisciplinary Scientific Programme on 2nd and 3rd March, a session on e-science and the Grid on 4th March and a Young Scientists Programme. The programme and registration forms are available at http://www.forum-engelberg.org/

Celebrating the tenth conference session

International Nuclear Information System (INIS)

1966-01-01

Full text: This number of the Bulletin appears during a month when the tenth regular session of the Agency's General Conference is being held. It is fitting that among the special arrangements made to give added significance to such an historical landmark should be an opening address by Herr Franz Jonas, Federal President of the host country, Austria. The Festsaal of the Kongresszentrum, in the Hofburg, has now been the centre for every annual session held in Austria, except the first. On that occasion, recorded in the photograph on the cover, the Konzerthaus was made available. A commemorative series of talks dealing with topics of particular interest in the international development of the peaceful uses of atomic energy, delivered by scientists of world distinction was another idea which will add much profound thought to the records of nuclear energy. Under the chairmanship of Professor L.C. Prado, with Dr. W.B. Lewis as Moderator, the subjects chosen by the participants were : The Impact of Atomic Energy in our Society - Sir John Cockcroft; Nuclear Power Systems and their Technical Potentialities - Prof. Alexandre Leipunski; The Commercial Future of Nuclear Power - Dr. William Webster; Nuclear Science in Life Sciences - Dr. A.R. Gopal-Ayengar; Fundamental Research in Atomic Energy Centres - Prof. Louis Neel. These speeches will be reproduced in full in the Agency's Atomic Energy Review. The pages of this issue of the Bulletin are intended to give indications of the stage which the Agency has now reached in some, but by no means all, of its activities in promoting the techniques of atomic energy for the benefit of mankind. (author)

Resolutions and other decisions of the General Conference. Thirty-seventh regular session. 27 September - 1 October 1993

International Nuclear Information System (INIS)

1994-05-01

The document reproduces the twenty-seven resolutions adopted and the fourteen other decisions taken by the IAEA General Conference at its thirty-seventh (1993) regular session. The resolutions are preceded by the agenda for the session

Resolutions and other decisions of the General Conference, 31. regular session, 21-25 September 1987

International Nuclear Information System (INIS)

1988-08-01

The seventeen resolutions adopted and the eleven other decisions taken by the General Conference at its thirty-first (1987) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text at the left-hand side of the page; on the right-hand side are given the date of the adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings - including voting results, where applicable - are contained (GC(XXXI)/OR,293-302)

Third Indian National Conference on Harbour and Ocean Engineering (INCHOE - 2004). Proceedings

Digital Repository Service at National Institute of Oceanography (India)

Mandal, S.; SanilKumar, V.; Jayakumar, S.

The two volumes contain 103 scientific papers in the field of harbour and ocean engineering, presented at the Third Indian National Conference on Harbour and Ocean Engineering (INCHOE - 2004), held at National Institute of Oceanography (NIO), Dona...

Invitational Conference on Measurement in Education; Proceedings (of the) Eleventh Southeastern Conference (December 8-9, 1972). Pre-Session.

Science.gov (United States)

Goolsby, Thomas M., Jr., Comp.

Three papers presented at the pre-session to the 11th Invitational Conference on Measurement in Education are provided. These papers are: "Public Schools in Transition. . . One Student Body, Its Needs and Directions" by George R. Rhodes, Jr., "Man to Mankind: The International Dimension of Teacher Education" by David G. Imig, and "Measurement for…

Exhibition Session of the exp.at’11 International Conference

Directory of Open Access Journals (Sweden)

Alberto Cardoso

2012-01-01

Full Text Available Man has been the humanity’s engineer for ages - human knowledge has been continuously built on conceptualization based on constant learning by doing activities. The observation and understanding of concepts and principles in action are the bases of the experimental activity leading to the correlation between reality and theory. Experimental activities are really important, contributing to prepare the future engineers for solving practical problems and for consolidating theoretical understanding and volatile knowledge based on abstract concepts. Therefore, experimental activity has been an essential part of education and training for engineers and engineering scientists. exp.at’11 (the 1st Experiment@ International Conference has been the first event of a new International Conference Experiment@ series devoted to online experimentation, enlarging the world capabilities in this particular area and contributing to collaborative work in emergent technologies, bringing together engineers, researchers and professionals from different areas. In its Exhibition Session, participants demonstrated their systems within developments of educational, medical and industrial applications.

Resolutions and other decisions of the general conference. Fortieth regular session. 16-20 September 1996

International Nuclear Information System (INIS)

1997-02-01

The twenty-two resolutions adopted and the fifteen other decisions taken by the General Conference at its fortieth (1996) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the results of the vote by which the resolution was adopted, the date of the adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including voting results, are contained (GC(40)/OR.1-10)

Resolutions and other decisions of the general conference. Fortieth regular session. 16-20 September 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-02-01

The twenty-two resolutions adopted and the fifteen other decisions taken by the General Conference at its fortieth (1996) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the results of the vote by which the resolution was adopted, the date of the adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including voting results, are contained (GC(40)/OR.1-10).

Proceedings of the 5. biennial international pipeline conference, IPC 2004 : the power of technology

International Nuclear Information System (INIS)

Paulson, K.; Kraft, H.; Hopkins, P.

2004-01-01

The fifth international pipeline conference provided a forum for experts in the pipeline industry, academia and governments to discuss new technologies and approaches to pipeline transport. Presentations focused on a wide range of issues related to pipeline engineering. The conference was divided into 16 main sessions: (1) compression and pump technologies, (2) corrosion protection and analysis techniques, (3) pipeline design and construction, (4) environmental issues, (5) database development, (6) emerging issues and innovative projects, (7) inspection techniques, (8) integrity management, (9) joining, (10) materials, (11) offshore issues, (12) operations and maintenance, (13) pipeline automation and measurement, (14) pipelining in northern environments, (15) risk and reliability, (16) standards and regulations. The presentations provided up-to-date information related to future technology trends as well as recent innovations and practices. Pipeline design standards and new pipeline materials using high strength steels and reinforced composite plastic coatings were also reviewed. Other sessions discussed emerging technologies for inspection, quality control, ultrasonic testing, and the use of remote sensors. The conference also included a student paper competition. A total of 339 peer reviewed presentations were given at the conference, all of which were indexed separately for inclusion in this database. refs., tabs., fig.

Resolutions and other decisions of the general conference. Thirty-ninth regular session. 18-22 September 1995

International Nuclear Information System (INIS)

1996-03-01

The twenty-four resolutions adopted and the seventeen other decisions taken by the General Conference at its thirty-ninth (1995) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the date of the adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including voting results, are contained (GC(39)/OR.1-10)

Resolutions and other decisions of the General Conference. Forty-second regular session, 21-25 September 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

The twenty-two resolutions adopted and the thirteen other decisions taken by the General Conference at its forty-second (1998) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the date of adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including all voting results, are contained (GC(42)/OR.1-10)

Resolutions and other decisions of the general conference. Thirty-ninth regular session. 18-22 September 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The twenty-four resolutions adopted and the seventeen other decisions taken by the General Conference at its thirty-ninth (1995) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the date of the adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including voting results, are contained (GC(39)/OR.1-10).

Resolutions and other decisions of the General Conference. Thirty-eighth regular session, 19-23 September 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The twenty-one resolutions adopted and the nineteen other decisions taken by the General Conference at its thirty-eighth (1994) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the date of adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including all voting results, are contained (GC(38)/OR.1-10)

International Conference-Session of the Section of Nuclear Physics of the Physical Sciences Division of RAS

CERN Document Server

2014-01-01

From November 17 to 21, 2014 the Section of Nuclear Physics of the Physical Sciences Division of the Russian Academy of Sciences and the National Research Nuclear University MEPhI will hold in MEPhI, Moscow, the International Conference-Session of SNP PSD RAS "Physics of Fundamental Interactions". The program of the session covers basic theoretical and experimental aspects of particle physics and related problems of nuclear physics and cosmology, and will consist of 30-minute highlight and review talks as well as 10-15-minute contributed reports. All highlight talks and part of contributed reports will be presented at plenary sessions of the conference. The remaining reports will be presented at the sections which will be formed after receiving of abstracts. On the recommendation of the Organizing Committee reports and talks containing new unpublished results will be published in special issues of journals "Nuclear Physics" and "Nuclear Physics and Engineering". For the institutions belonging to the Rosatom s...

Resolutions and other decisions of the General Conference. 30. regular session, 29 Septemeber - 3 October 1986

International Nuclear Information System (INIS)

1987-08-01

The thirteen resolutions adopted and the nine other decisions taken by the General Conference at its thirtieth (1986) regular session are reproduced in this booklet. The resolutions (which, for ease of reference, are preceded by the agenda for the session) are set out in the order of their adoption, the title of each being preceded by a serial number by which it may be cited. Any footnotes to a resolution appear immediately after the text at the left-hand side of the page; on the right-hand side are given the date of the adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings - including voting results, where applicable - are contained (GC(XXX)/OR.282-291)

Proceedings of the European Symposium on Pressure Equipment - ESOPE 2004

International Nuclear Information System (INIS)

2004-01-01

The symposium on Pressure Equipment Technology, organised every three years by the AFIAP (Association Francaise des Ingenieurs en Appareils a Pression), for the second time is organised at the European level. It is the 'European Symposium on Pressure Equipment, ESOPE 2004'. This symposium is placed under the patronage of the Minister of Industry. The central theme of ESOPE 2001 has been the European Directives for Fixed Equipment (PED) and for Transportable Equipment (TPED). ESOPE 2004 will be a state on the application of these Directives after 3 years of use. The first plenary session will made the comparison of some National codes with EN13445 standard and of the evolution of the Asme code. But the principal theme of the second plenary session and the panel, where European experts will answer to your questions, will be on 'Pressure equipment life management'. It therefore seems important to incorporate this subject into the agenda of this symposium in order to allow widespread dialogue between the industrial members concerned. Our association, AFIAP, has the advantage of regrouping all the industrial partners concerned, from the end user and the administrative body responsible for equipment safety, to the pressure equipment fabricator and his materials suppliers, also including those bodies responsible for design, inspection and certification. To improve availability of equipment and reduce production costs the most efficient way is the development of technology. It is essential to improve competitiveness of European companies. Research is necessary, but the results must be available to everyone, including small and medium-sized industries. ESOPE 2004 has 3 technical sessions in parallel, which will be followed, by many fruitful exchanges of experience: - design/materials - fabrication/welding/inspection - fitness for service. You will find on a CD-Rom all the contributions which have been presented. (authors)

Resolutions and other decisions of the General Conference. Forty-first regular session, 29 September - 3 October 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The twenty-five resolutions adopted and the fourteen other decisions taken by the General Conference at its forty-first (1997) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the date of adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including all voting results, are contained (GC(41)/OR.1-10)

Accelerator System Model (ASM) user manual with physics and engineering model documentation. ASM version 1.0

International Nuclear Information System (INIS)

1993-07-01

The Accelerator System Model (ASM) is a computer program developed to model proton radiofrequency accelerators and to carry out system level trade studies. The ASM FORTRAN subroutines are incorporated into an intuitive graphical user interface which provides for the open-quotes constructionclose quotes of the accelerator in a window on the computer screen. The interface is based on the Shell for Particle Accelerator Related Codes (SPARC) software technology written for the Macintosh operating system in the C programming language. This User Manual describes the operation and use of the ASM application within the SPARC interface. The Appendix provides a detailed description of the physics and engineering models used in ASM. ASM Version 1.0 is joint project of G. H. Gillespie Associates, Inc. and the Accelerator Technology (AT) Division of the Los Alamos National Laboratory. Neither the ASM Version 1.0 software nor this ASM Documentation may be reproduced without the expressed written consent of both the Los Alamos National Laboratory and G. H. Gillespie Associates, Inc

Globe 2004 review : 8. biennial trade fair and conference on business and the environment

International Nuclear Information System (INIS)

2004-01-01

The Globe 2004 conference offered networking opportunities for those interested in critical environmental business and sustainability issues. More than 10,000 participants from 75 countries attended the conference which addressed issues associated with sustainability principles in the design and construction of buildings, urban transportation systems and energy and water systems. The conference and trade show highlighted innovative technologies regarding alternate energy sources; air quality management; climate change; energy-efficient vehicles; fuel cell technologies; green building products and technologies; industrial waste management; urban environmental management; solid waste management, recycling and sustainable construction; and, transportation technologies and solutions. figs

Highlights of the 2nd session of the General Conference

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-01-15

' recommendation that the total appropriation for the administrative expenses of the Agency in 1959 shall amount to $5,225,000, and by 58 votes, none against and one abstention that the target for voluntary contributions to the General Fund be set at $1,500,000. A number of separate votes on individual budget items had all resulted in majorities for the original Board of Governors' recommendations. A Special Committee on, the pledging of voluntary contributions to the General Fund from which the operational part of the Agency's programme was to be financed met on 3 October. As Mr. Sterling Cole, Director General, explained unlike the specialized agencies of the UN, the Agency's technical assistance activities, including all fellowships and technical assistance projects and equipment provided at the Agency's expense as well as its functional laboratory will have to be financed at present through voluntary contributions. By the end of the second session of the General Conference, the President was able to announce a total of approximately $ 848,000 pledged by 21 Member States, a number of delegates having indicated their countries' willingness to make contributions, the amount of which would be made known at a later date. All main decisions taken during the second session of the General Conference are listed.

Eleventh annual U.S. DOE low-level radioactive waste management conference: Executive summary, opening plenary, technical session summaries, and attendees

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-01-01

The conference consisted of ten technical sessions, with three sessions running simultaneously each day. Session topics included: regulatory updates; performance assessment;understanding remedial action efforts; low-level waste strategy and planning (Nuclear Energy); low-level waste strategy and planning (Defense); compliance monitoring; decontamination and decommissioning; waste characterization; waste reduction and minimization; and prototype licensing application workshop. Summaries are presented for each of these sessions.

Accelerator System Model (ASM) user manual with physics and engineering model documentation. ASM version 1.0

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-07-01

The Accelerator System Model (ASM) is a computer program developed to model proton radiofrequency accelerators and to carry out system level trade studies. The ASM FORTRAN subroutines are incorporated into an intuitive graphical user interface which provides for the {open_quotes}construction{close_quotes} of the accelerator in a window on the computer screen. The interface is based on the Shell for Particle Accelerator Related Codes (SPARC) software technology written for the Macintosh operating system in the C programming language. This User Manual describes the operation and use of the ASM application within the SPARC interface. The Appendix provides a detailed description of the physics and engineering models used in ASM. ASM Version 1.0 is joint project of G. H. Gillespie Associates, Inc. and the Accelerator Technology (AT) Division of the Los Alamos National Laboratory. Neither the ASM Version 1.0 software nor this ASM Documentation may be reproduced without the expressed written consent of both the Los Alamos National Laboratory and G. H. Gillespie Associates, Inc.

Stockholm Safety Conference. Analysis of the sessions on radiological protection, licensing and risk assessment

International Nuclear Information System (INIS)

Gea, A.

1981-01-01

A summary of the sessions on radiological protection, licensing and risk assessment in the safety conference of Stockholm is presented. It is considered the new point of view of the nuclear safety, probabilistic analysis, components failures probability and accident analysis. They are included conclusions applicable in many cases to development countries. (author)

98th LHCC meeting Agenda OPEN Session and CLOSED Session

CERN Document Server

CERN. Geneva

2009-01-01

OPEN Session on Wednesday, 8 July at 9h00-11h00 in Main Auditorium, Live webcast, followed by CLOSED Session, Conference room 160-1-009 11h20-17h00. CLOSED Session continued on Thursday, 9 July at 9h00-12h30

AIS ASM Operational Integration Plan

Science.gov (United States)

2013-08-01

Rack mount computer AIS Radio Interface Ethernet Switch 192.168.0.x Firewall Cable Modem 192.168.0.1 VTS Accred. Boundary AIS ASM Operational... AIS ASM Operational Integration Plan Distribution Statement A: Approved for public release; distribution is unlimited. August 2013 Report No...CD-D-07-15 AIS ASM Operational Integration Plan ii UNCLAS//Public | CG-926 R&DC | I. Gonin, et al. | Public August 2013 N O T I C

Proceedings ICTEA 2004, the 1. international conference on thermal engineering : theory and applications

International Nuclear Information System (INIS)

Saghir, M.Z.; Nasr, G.

2004-01-01

This conference provided an opportunity to share research trends in thermal energy, including fluid flow in porous media as encountered in different branches of science and engineering ranging from agricultural, chemical, civil and petroleum engineering, to food and soil sciences. The economic importance of enhanced oil recovery was emphasized along with growing concerns about pollution and ground water quality. Several presentations focused on the application of experimental, analytical or theoretical thermal and energy engineering. New technologies that improve the energy efficiency of engines, reduce exhaust emission levels and explore energy alternatives were also highlighted. The sessions of the conference were entitled: heat transfer; porous media; combustion; environment; enhanced oil recovery; double diffusion; turbulent flow; and, material science. The conference featured 77 presentations, of which 11 have been catalogued separately for inclusion in this database. refs., tabs., figs

Statement of the Director General to the 21st session of the General Conference of the IAEA

International Nuclear Information System (INIS)

1977-01-01

In his speech to the 21st session of the General Conference of the IAEA the Director General presented the history of establishment of the IAEA, main objectives and main achievements during its 20-year operation

CONAGT's place in ASME's centennial year

International Nuclear Information System (INIS)

Miller, W.H. Jr.

1985-01-01

A status report on ASME's Committee on Nuclear Air and Gas Treatment (CONAGT) is presented. This year ASME celebrates its centennial while CONAGT issues its first code sections covering fans, blowers, and refrigeration equipment. Significant code related CONAGT activities are covered as well as an explanation of CONAGT's place in the ASME organization

Academic poster design at a national conference: a need for standardised guidance?

Science.gov (United States)

Gopal, Alan; Redman, Melody; Cox, David; Foreman, David; Elsey, Elizabeth; Fleming, Simon

2017-10-01

Academic posters are a common means of disseminating information at conferences. Presentation at conferences is frequently given weight in postgraduate training programme recruitment. Some conferences provide guidance for visual presentation of posters. For the Association of the Study of Medical Education (ASME) Annual Scientific Meeting (ASM) 2015, poster abstract guidance was provided; however, the guidance on poster design was limited to size and orientation. The aim of this study was to investigate academic poster quality at a national medical education conference to identify where standards could be promoted and improved. Presentation at conferences is frequently given weight in postgraduate training programme recruitment METHODS: Six auditors assessed all posters displayed at the ASME ASM (15-17 July 2015) using guidelines based upon a modified checklist for academic posters. Ten criteria were agreed as assessment standards for poster design quality. One-hundred-and-eighty posters were assessed: 29 per cent had appropriate copyright for the materials displayed (n = 52); 41 per cent included suitable contact details (n = 73); 48 per cent (n = 87) had a text to graphic ratio of 50 : 50; 72 per cent (n = 130) met ASME guidance for layout and orientation; 76 per cent (n = 137) had appropriate referencing; 78 per cent showed evidence of proofreading for grammar and spelling (n = 140); 79 per cent (n = 142) were readable at a distance of 2 metres; and 87 per cent used appropriate academic logos (n = 156). There was variability in design quality as assessed by these criteria. We recommend that detailed guidance should be produced and disseminated by the organising conference. This may improve poster quality and aid in the communication of presented material. We aim to re-audit following the production and dissemination of poster presentation guidance. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical

Statement to the 41st session of the General Conference of the International Atomic Energy Agency 29 September 1997; Statement to the 52nd session of the United Nations General Assembly 12 November 1997

International Nuclear Information System (INIS)

Blix, H.

1997-12-01

The document presents Statement to the 41st Session of the General Conference of the International Atomic Energy Agency and Statement to the 52nd Session of the United Nations General Assembly made at the 40th anniversary of the IAEA

Summary report of the 20th IAEA fusion energy conference (November 1-6, 2004, Vilamoura, Portugal)

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-09-01

Fusion Energy Conference has been held aiming to report and exchange the information concerning the nuclear fusion research every two years since 1961 by IAEA. The conference has authorities most in the field of the fusion research. The 20th Fusion Energy Conference was held at Vilamoura in Portugal on November 1st through 6th in 2004, and 700 researchers or more participated in the conference from 35 countries. This report is a summary of the conference that the JAERI researchers who participated in this conference (35 persons in total) have seen presentations of each contributed papers at the conference room and have understood from each point of view. The contents of this report are very comprehensible, because those are written from the viewpoint of each researchers of JAERI. The purpose of this report is to provide the information which is useful for many researchers to understand the latest study results over a wide field of fusion research. (author)

75 FR 24323 - American Society of Mechanical Engineers (ASME) Codes and New and Revised ASME Code Cases

Science.gov (United States)

2010-05-04

...The NRC proposes to amend its regulations to incorporate by reference the 2005 Addenda through 2008 Addenda of Section III, Division 1, and the 2005 Addenda through 2008 Addenda of Section XI, Division 1, of the ASME Boiler and Pressure Vessel Code (ASME B&PV Code); and the 2005 Addenda and 2006 Addenda of the ASME Code for Operation and Maintenance of Nuclear Power Plants (ASME OM Code). The NRC also proposes to incorporate by reference ASME Code Case N-722-1, ``Additional Examinations for PWR Pressure Retaining Welds in Class 1 Components Fabricated With Alloy 600/82/182 Materials Section XI, Division 1,'' and Code Case N-770, ``Alternative Examination Requirements and Acceptance Standards for Class 1 PWR [Pressurized- Water Reactor] Piping and Vessel Nozzle Butt Welds Fabricated with UNS N06082 or UNS W86182 Weld Filler Material with or without Application of Listed Mitigation Activities.''

Nondestructive testing standards and the ASME code

International Nuclear Information System (INIS)

Spanner, J.C.

1991-04-01

Nondestructive testing (NDT) requirements and standards are an important part of the ASME Boiler and Pressure Vessel Code. In this paper, the evolution of these requirements and standards is reviewed in the context of the unique technical and legal stature of the ASME Code. The coherent and consistent manner by which the ASME Code rules are organized is described, and the interrelationship between the various ASME Code sections, the piping codes, and the ASTM Standards is discussed. Significant changes occurred in ASME Sections 5 and 11 during the 1980s, and these are highlighted along with projections and comments regarding future trends and changes in these important documents. 4 refs., 8 tabs

Proceedings of the CERI 2004 petrochemical conference : Positioning for recovery. CD-ROM ed.

International Nuclear Information System (INIS)

2004-01-01

This conference provided a networking opportunity for those involved in Canada's petrochemical industry. The conditions that affect the industry were discussed along with opportunities for maintaining a competitive position in a global context. Topics of discussion included supply shortages, high costs and major shifts in international trade. It was emphasized that innovation is the key for the industry to maintain its market in a strengthening world economy. The conference featured the following 6 sessions: (1) petrochemicals in a strengthening world economy, (2) twenty-first century natural gas, the other energy crisis, (3) electricity, (4) the feedstock future, upgrading and integration opportunities, (5) adding value to resources, and (6) innovation and opportunity, prospects for new processes. Investment growth and implications for Canada were also outlined along with the challenge of product movement, including new approaches to pipeline shipments, rail transport and maritime transport. The conference featured 23 presentations, of which 9 have been indexed separately for inclusion in this database. tabs., figs

The ASME Code today -- Challenges, threats, opportunities

International Nuclear Information System (INIS)

Canonico, D.A.

1995-01-01

Since its modest beginning as a single volume in 1914 the ASME Code, or some of its parts, is recognized today in 48 of the United States and all providence's of Canada. The ASME Code today is composed of 25 books including two Code Case books. These books cover the new construction of boilers and pressure vessels and the new construction and In-Service-Inspection of Nuclear Power Plant components. The ASME accredits all manufacturers of boilers and pressure vessels built to the ASME Code. There are approximately 7650 symbol stamps issued throughout the world. Over 23% of the symbol stamps have been issued outside the USA and Canada. The challenge to the ASME Code is to be accepted as the world standard for pressure boundary components. There are activities underway to achieve that goal. The ASME Code is being revised to make it a more friendly document to entities outside of North America. To achieve that end there are specific tasks underway which are described here

Fall meeting 2004: information conference on engines. Final and interim reports of the research centres; Herbsttagung 2004: Informationstagung Motoren. Abschluss- und Zwischenberichte der Forschungsstellen

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The Proceedings (volume R526, 2004) of the Information Conference on Engines which has been held on the 23rd September 2004 in Pforzheim/Germany, contains ten final and interim reports. The subjects of the contributions presented were as follow: particulate filter with NOx storage coating; cause study on damage-relevant knocking combustion; spray wall interaction; binaural transfer path analysis synthesis; acoustical optimized sealing-systems on engine acoustics; working process caused gas exchange noise; knowledge based diesel engine optimization; frontal press fit assemblies; case hardening and autofrettage; oil condition sensor (orig.)

Proceedings of the Sixth International Conference on Fluidized Bed Combustion. Volume 1. Plenary sessions

Energy Technology Data Exchange (ETDEWEB)

None

1980-08-01

The Sixth International Conference on Fluidized Bed Combustion was held at the Atlanta Hilton, Atlanta, Georgia, April 9-11, 1980. The papers in this volume involved presentation of the research and development programs of the US (US DOE, TVA, EPRI and US EPA), United Kingdom, Federal Republic of Germany and the People's Republic of China. Eight papers from Vol. 1 (Plenary Sessions) of the proceedings have been entered individually into EDB and ERA. (LTN)

Statement to the 38th session of the General Conference of the International Atomic Energy Agency 19 September 1994; Statement to the 49th session of the United Nations General Assemblies 17 October 1994

International Nuclear Information System (INIS)

Blix, H.

1994-10-01

The document reproduces the two statements of the IAEA Director General to the 38th Session of the General conference of the IAEA from 19 September 1994 and to the 49th Session of the United Nations General Assembly from 17 October 1994. A separate abstract was prepared for each statement

Intenational conference on high-energy physics. Volume 2. Sessions IV to VIII. [Geneva, June 27-July 4, 1979

Energy Technology Data Exchange (ETDEWEB)

1980-02-01

Volume 2 of the conference proceedings contains sessions on hadron physics, charged-lepton physics, the p-p-bar collider at CERN, future European accelerator possibilities, parallel discussion sessions (on high-energy) hadron-induced reactions, deep inelastic phenomena, hadron spectroscopy, weak ineractions and gauge theories, and quark confinement), and a closing session on gauge appreciation of developments in particle physics. A list of participants is also included. Three of the papers in this volume have already been cited in ERA, and can be found as reference to the entry CONF-790642-- in the Report Number Index. The remaining 36 will be processed as they are received on the Atomindex tape. (RWR)

Topical Session on Funding Issues in Connection with Decommissioning of Nuclear Power Plants - 9 November 2004

International Nuclear Information System (INIS)

2006-01-01

Set up by the Radioactive Waste Management Committee (RWMC), the WPDD brings together senior representatives of national organisations who have a broad overview of Decommissioning and Dismantling (D and D) issues through their work as regulators, implementers, R and D experts or policy makers. These include representatives from regulatory authorities, industrial decommissioners from the NEA Co-operative Programme on Exchange of Scientific and Technical Information on Nuclear Installation Decommissioning Projects (CPD), and cross-representation from the other NEA Committees. The EC is a member of the WPDD and the IAEA is participating as an observer. This broad participation provides good possibilities for the co-ordination efforts amongst activities in the international programmes. At its fifth meeting, in Paris, 8-10 November 2004, the WPDD held a topical session on the 'Funding Issues in Connection with Decommissioning of Nuclear Power Plants'. This report documents the topical session on Funding. An agenda of the Topical session can be found in Appendix 1. The topical session was meant to provide an exchange of information and experience on the following issues: Ethical Values; Actual Experiences of Fund Setting and Management; Uncertainties in Funding. At the end of each session time was allotted for a plenary discussion. The Rapporteur reviewed the main points and the lessons learnt at the end of the whole Topical Session. The Topical Session is documented as follows. A summary of the presentations, the country reports, the discussions and the key issues and lessons learnt is given in the main part of this report. The agenda of the Topical session can be found in Appendix 1 and the full papers supporting each presentation are given in Appendix 2. The national presentations on 'Actual experiences of Fund Setting and Management' in session 2 can be found in Appendix 3 and the national presentations on 'Uncertainties in Funding' in session 3 can be found in

Globalization of ASME Nuclear Codes and Standards

International Nuclear Information System (INIS)

Swayne, Rick; Erler, Bryan A.

2006-01-01

With the globalization of the nuclear industry, it is clear that the reactor suppliers are based in many countries around the world (such as United States, France, Japan, Canada, South Korea, South Africa) and they will be marketing their reactors to many countries around the world (such as US, China, South Korea, France, Canada, Finland, Taiwan). They will also be fabricating their components in many different countries around the world. With this situation, it is clear that the requirements of ASME Nuclear Codes and Standards need to be adjusted to accommodate the regulations, fabricating processes, and technology of various countries around the world. It is also very important for the American Society of Mechanical Engineers (ASME) to be able to assure that products meeting the applicable ASME Code requirements will provide the same level of safety and quality assurance as those products currently fabricated under the ASME accreditation process. To do this, many countries are in the process of establishing or changing their regulations, and it is important for ASME to interface with the appropriate organizations in those countries, in order to ensure there is effective use of ASME Codes and standards around the world. (authors)

Statement to the 34th session of the general conference of the International Atomic Energy Agency, 17 September 1990. Statement to the 45th session of the United Nations general assembly, 23 October 1990

International Nuclear Information System (INIS)

Blix, H.

1991-01-01

The document contains the following two statements of Hans Blix, Director General of the IAEA: Statement to the 34th Session of the General Conference of the International Atomic Energy Agency, 17 September 1990; Statement to the 45th Session of the United Nations General Assembly, 23 October 1990. A separate abstract was prepared for each of these statements

Statement to the 35th session of the General Conference of the International Atomic Energy Agency 16 September 1991; Statement to the 46th session of the United Nations General Assembly 21 October 1991

International Nuclear Information System (INIS)

Blix, H.

1991-01-01

The document contains the following two statements of Hans Blix, Director General of the IAEA: Statement to the 35th session of the General Conference of the International Atomic Energy Agency, 16 September 1991; Statement to the 46th session of the United Nations General Assembly, 21 October 1991. A separate abstract was prepared for each of these statements

Statement to the 39th session of the General Conference of the International Atomic Energy Agency 18 September 1995. Statement to the 50th session of the United Nations General Assembly 1 November 1995

International Nuclear Information System (INIS)

Blix, H.

1995-11-01

In the Statement to the 39th Session of the General Conference of the IAEA main directions of IAEA activities for 1994 and plans for the future are outlined. In the Statement to the 50th Session of the United Nations General Assembly main achievements and challenges facing the international community in the field of IAEA competence are discussed

Statement to the 39th session of the General Conference of the International Atomic Energy Agency 18 September 1995. Statement to the 50th session of the United Nations General Assembly 1 November 1995

Energy Technology Data Exchange (ETDEWEB)

Blix, H

1995-11-01

In the Statement to the 39th Session of the General Conference of the IAEA main directions of IAEA activities for 1994 and plans for the future are outlined. In the Statement to the 50th Session of the United Nations General Assembly main achievements and challenges facing the international community in the field of IAEA competence are discussed.

ASM observations of X-ray flares from 4U 0115+63 and ASM 1354-64.

Science.gov (United States)

Tsunemi, H.; Kitamoto, S.

The authors report two X-ray flares detected with the All Sky Monitor (ASM) on board the GINGA satellite. One is from the recurrent X-ray pulsar 4U 0115+63 and the other is from the probable recurrent X-ray nova named ASM 1354-64. The maximum intensity for 4U 0115+63 was 180 mCrab and its duration was at least 22 days. Its spectrum was hard and resembled those of X-ray pulsars. The maximum intensity of ASM 1354-64 was 300 mCrab. It faded down below the detection limit at the end of August 1987. Its spectrum was soft and was similar to those of black hole candidates.

Statement to the 40th session of the General Conference of the International Atomic Energy Agency 16 September 1996; Statement to the 51st session of the United Nations General Assembly 28 October 1996

International Nuclear Information System (INIS)

Blix, H.

1996-11-01

In the Statement to the 40th Session of the General Conference of the International Atomic Energy Agency main directions of the IAEA activities and plans for the future are outlined. In the Statement to the 51th Session of the United Nations General Assembly main achievements and challenge facing the international community in the field of IAEA competence are discussed

46 CFR 56.60-1 - Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1).

Science.gov (United States)

2010-10-01

... Fittings and Other Piping Components—Magnetic Particle Examination Method. SP-55 Quality Standard for Steel... certification, use is limited to applications within heat exchangers. 12 Hydrostatic testing of these fittings... and Seamless Wrought Steel Pipe. ASME B36.19M 2004 Stainless Steel Pipe. American Society for Testing...

References: AePW publications

Data.gov (United States)

National Aeronautics and Space Administration — This page is the repository for the publications resulting from the AePW. This includes the special sessions at conferences: AIAA ASM 2012, Grapevine TX; AIAA SDM...

Conference of University Administrators Conference Proceedings (12th, Surrey, England, March 21-23, 1985).

Science.gov (United States)

Conference of Univ. Administrators.

Conference proceedings for the Conference of University Administrators include summaries of conference sessions, along with Austin Pearce's paper, "The Needs of Industry: What Are They?" Sessions focused on: forming a university company, financial diversification, financial modeling, stock exchange investment and universities, funding of…

Index to place of publication of ASME Papers, 1978--1988

International Nuclear Information System (INIS)

Youngen, G.K.

1990-06-01

This index is a list of American Society of Mechanical Engineers (ASME) Papers that are reprinted in the ASME Transactions series of journals. ASME Papers are often cited only by their paper number, making it difficult to determine if the article has ever appeared in print in the journal literature. This index will be useful for tracking down those papers published as journal articles by the ASME. It will also serve as a guide for retention for subscribers to the ASME Papers and Transaction Series. Paper numbers that appear in the journals may be weeded from the collection of ASME Papers

European Research Reactor Conference (RRFM) 2015: Conference Proceedings

International Nuclear Information System (INIS)

2015-01-01

In 2015 the European Research Reactor Conference, RRFM, took place in Bucharest, Romania. The conference programme resolved around a series of plenary sessions dedicated to the latest global developments with regards to research reactor technology and management. Parallel sessions focused on all areas of the fuel cycle of research reactors, their utilisation, operation and management as well as new research reactor projects and Innovative methods in reactor physics and thermo-hydraulics. The European Research Reactor Conference also gave special attention to safety and security of research reactors

European Research Reactor Conference (RRFM) 2016: Conference Proceedings

International Nuclear Information System (INIS)

2016-01-01

The 2016 European Research Reactor Conference, RRFM, took place in Berlin, Germany. The conference programme resolved around a series of plenary sessions dedicated to the latest global developments with regards to research reactor technology and management. Parallel sessions focused on all areas of the fuel cycle of research reactors, their utilisation, operation and management as well as new research reactor projects and Innovative methods in reactor physics and thermo-hydraulics. The European Research Reactor Conference also gave special attention to safety and security of research reactors.

Travel for the 2004 American Statistical Association Biannual Radiation Meeting: "Radiation in Realistic Environments: Interactions Between Radiation and Other Factors

Energy Technology Data Exchange (ETDEWEB)

Brenner, David J.

2009-07-21

The 16th ASA Conference on Radiation and Health, held June 27-30, 2004 in Beaver Creek, CO, offered a unique forum for discussing research related to the effects of radiation exposures on human health in a multidisciplinary setting. The Conference furnishes investigators in health related disciplines the opportunity to learn about new quantitative approaches to their problems and furnishes statisticians the opportunity to learn about new applications for their discipline. The Conference was attended by about 60 scientists including statisticians, epidemiologists, biologists and physicists interested in radiation research. For the first time, ten recipients of Young Investigator Awards participated in the conference. The Conference began with a debate on the question: “Do radiation doses below 1 cGy increase cancer risks?” The keynote speaker was Dr. Martin Lavin, who gave a banquet presentation on the timely topic “How important is ATM?” The focus of the 2004 Conference on Radiation and Health was Radiation in Realistic Environments: Interactions Between Radiation and Other Risk Modifiers. The sessions of the conference included: Radiation, Smoking, and Lung Cancer Interactions of Radiation with Genetic Factors: ATM Radiation, Genetics, and Epigenetics Radiotherapeutic Interactions The Conference on Radiation and Health is held bi-annually, and participants are looking forward to the 17th conference to be held in 2006.

8th International Conference on Solid State Physics (SSP 2004), Workshop “Mössbauer Spectroscopy of Locally Heterogeneous Systems”

CERN Document Server

Kadyrzhanov, K. K; SSP 2004

2006-01-01

This volume contains papers presented at the 8th International Conference on Solid State Physics (SSP 2004), Workshop "Mössbauer Spectroscopy of Locally Heterogeneous Systems", held in Almaty, Kazakhstan, 23–26 August 2004. It should be of interest to researchers and PhD students working or interested in recent results in the locally inhomogeneous system investigations by Mössbauer Spectroscopy and the new concepts of data evaluation of complex Mössbauer spectra.

Activated sludge model No. 2d, ASM2d

DEFF Research Database (Denmark)

Henze, M.

1999-01-01

The Activated Sludge Model No. 2d (ASM2d) presents a model for biological phosphorus removal with simultaneous nitrification-denitrification in activated sludge systems. ASM2d is based on ASM2 and is expanded to include the denitrifying activity of the phosphorus accumulating organisms (PAOs......). This extension of ASM2 allows for improved modeling of the processes, especially with respect to the dynamics of nitrate and phosphate. (C) 1999 IAWQ Published by Elsevier Science Ltd. All rights reserved....

Low appendicular skeletal muscle mass (ASM) with limited mobility and poor health outcomes in middle-aged African Americans.

Science.gov (United States)

Malmstrom, Theodore K; Miller, Douglas K; Herning, Margaret M; Morley, John E

2013-09-01

Recent efforts to provide a consensus definition propose that sarcopenia be considered a clinical syndrome associated with the loss of both skeletal muscle mass and muscle function that occurs with aging. Validation of sarcopenia definitions that include both low muscle mass and poor muscle function is needed. In the population-based African American Health (AAH) study (N = 998 at baseline/wave 1), muscle mass and mobility were evaluated in a clinical testing center in a subsample of N = 319 persons (ages 52-68) at wave 4 (2004). Muscle mass was measured using dual energy x-ray absorptiometry and mobility by a 6-min walk test and 4-m gait walk test. Height corrected appendicular skeletal mass (ASM; 9.0 ± 1.5 in n = 124 males, 8.3 ± 2.2 in n = 195 females) was computed as total lean muscle mass in arms and legs (kilograms) divided by the square of height (meters). Cross-sectional and longitudinal (6-year) associations of low ASM (bottom 25 % AAH sample; ASM with limited mobility (4-m gait walk ≤1 m/s or 6-min walk ASM with limited mobility was associated with IADL difficulties (p = .008) and frailty (p = .040) but not with ADL difficulties or falls in cross-sectional analyses; and with ADL difficulties (p = .022), IADL difficulties (p = .006), frailty (p = .039), and mortality (p = .003) but not with falls in longitudinal analyses adjusted for age and gender. Low ASM alone was marginally associated with mortality (p = .085) but not with other outcomes in cross-sectional or longitudinal analyses. Low ASM with limited mobility is associated with poor health outcomes among late middle-aged African Americans.

An example of a component replacement when applying ASME N509 and ASME N510 to older ventilation systems

International Nuclear Information System (INIS)

Arndt, T.E.

1994-06-01

This paper presents an example of a component replacement (electric heater) when installed in an older ventilation system that was constructed before the issuance of ASME N509 and N510. Many of the existing ventilation systems at the Hanford Site were designed, fabricated, and installed before the issuance of ASME N509 and N510. Requiring the application of these codes to existing ventilation systems presents challenges to the engineer when design changes are needed. Although it may seem that the application of ASME N509 or N510 may be a hindrance at times, this does not need to occur. Proper preparation at the start of project or design modifications can minimize frustration to the engineer when it is judged that portions of ASME N509 and N510 do not apply in a particular application

Safety Analysis Report for the KRI-ASM Transport Package

Energy Technology Data Exchange (ETDEWEB)

Bang, K. S.; Lee, J. C.; Kim, D. H.; Park, H. Y.; Kim, J. B.; Kim, H. J.; Seo, K. S

2005-11-15

Safety evaluation for the KRI-ASM transport package to transport safely I-131, which is produced at HANARO research reactor in KAERI, was carried out. In the safety analyses results for the KRI-ASM transport package, all the maximum stresses as well as the maximum temperature of the surface are lower than their allowable limits. The safety tests were performed by using the test model of the KRI-ASM transport package. Leak Test was performed after drop test and penetration test, the measured leakage rate was lower than allowable leakage rate. It is revealed that the containment integrity of the KRI-ASM transport package is maintained. Therefore, it shows that the integrity of the KRI-ASM transport package is well maintained.

Proc. Agent 2004 Conf. on Social Dynamics : Interaction, Reflexivity and Emergence

Energy Technology Data Exchange (ETDEWEB)

C. M. Macal, D. Sallach, M. J. North, eds.

2004-01-01

I'd like to welcome you to the Agent 2004 conference. As most of you are aware, this conference is the fifth in a series of meetings that began in 1999. A conference followed the next year in 2000. The 2001 conference was skipped because of some conflicts with other conferences, and the conferences have proceeded annually since then. We have the proceedings of the previous conferences available here on CDs. One CD has the proceedings from 1999, 2000, and 2002; the other contains last year's proceedings. The purpose of these conferences is to advance the state of the computational social sciences and to integrate the social sciences with the decision sciences and something that is traditionally known as the management sciences. Those of you in the operations/research area are familiar with the traditional school of modeling simulation that emerged from that scientific area. This conference will bring together a different group of people to talk about the topic of agent-based theories and simulations. This fifth agent conference is one of a group of conferences held annually around the country. Most of you are probably aware of the CASOS Conference held at Carnegie Mellon University, usually in July. UCLA holds the Arrowhead Conference, generally around May. The University of Michigan is now holding a conference as well. Of course everyone is aware of SwarmFest, which has been held annually for about a decade. The Swarm seems to 'swarm' in different locations each year. As you're well aware, this conference is organized into a three-day program. This is the first time we've used three days for the full conference setting. Last year, we held simultaneous sessions, and that didn't work well for most of those who attended. We had complaints from people who missed sessions and papers because of scheduling, so we decided to extend this year's conference by one day. As a result, we now have a program designed to present the papers in

ASME Code requirements for multi-canister overpack design and fabrication

International Nuclear Information System (INIS)

SMITH, K.E.

1998-01-01

The baseline requirements for the design and fabrication of the MCO include the application of the technical requirements of the ASME Code, Section III, Subsection NB for containment and Section III, Subsection NG for criticality control. ASME Code administrative requirements, which have not historically been applied at the Hanford site and which have not been required by the US Nuclear Regulatory Commission (NRC) for licensed spent fuel casks/canisters, were not invoked for the MCO. As a result of recommendations made from an ASME Code consultant in response to DNFSB staff concerns regarding ASME Code application, the SNF Project will be making the following modifications: issue an ASME Code Design Specification and Design Report, certified by a Registered Professional Engineer; Require the MCO fabricator to hold ASME Section III or Section VIII, Division 2 accreditation; and Use ASME Authorized Inspectors for MCO fabrication. Incorporation of these modifications will ensure that the MCO is designed and fabricated in accordance with the ASME Code. Code Stamping has not been a requirement at the Hanford site, nor for NRC licensed spent fuel casks/canisters, but will be considered if determined to be economically justified

International Accreditation of ASME Codes and Standards

International Nuclear Information System (INIS)

Green, Mervin R.

1989-01-01

ASME established a Boiler Code Committee to develop rules for the design, fabrication and inspection of boilers. This year we recognize 75 years of that Code and will publish a history of that 75 years. The first Code and subsequent editions provided for a Code Symbol Stamp or mark which could be affixed by a manufacturer to a newly constructed product to certify that the manufacturer had designed, fabricated and had inspected it in accordance with Code requirements. The purpose of the ASME Mark is to identify those boilers that meet ASME Boiler and Pressure Vessel Code requirements. Through thousands of updates over the years, the Code has been revised to reflect technological advances and changing safety needs. Its scope has been broadened from boilers to include pressure vessels, nuclear components and systems. Proposed revisions to the Code are published for public review and comment four times per year and revisions and interpretations are published annually; it's a living and constantly evolving Code. You and your organizations are a vital part of the feedback system that keeps the Code alive. Because of this dynamic Code, we no longer have columns in newspapers listing boiler explosions. Nevertheless, it has been argued recently that ASME should go further in internationalizing its Code. Specifically, representatives of several countries, have suggested that ASME delegate to them responsibility for Code implementation within their national boundaries. The question is, thus, posed: Has the time come to franchise responsibility for administration of ASME's Code accreditation programs to foreign entities or, perhaps, 'institutes.' And if so, how should this be accomplished?

Proceedings of the 34th International Conference in High Energy Physics (ICHEP08), Philadelphia, PA, 2008

International Nuclear Information System (INIS)

Lockyer, Nigel S.; Smith, A.J. Stewart

2008-01-01

In 2004 a team from the University of Pennsylvania, Princeton University, and the Institute for Advanced Study proposed to host the 2008 International Conference on High Energy Physics (ICHEP) on the campus of the University of Pennsylvania in Philadelphia. The proposal was approved later that year by the C-11 committee of the International Union of Pure and Applied Physics. The Co-Chairs were Nigel S. Lockyer (U. Penn/TRIUMF) and A.J. Stewart Smith (Princeton); Joe Kroll of U. Penn served as Deputy Chair from 2007 on. Highlights of the proposal included 1. greatly increased participation of young scientists, women scientists, and graduate students 2. new emphasis on formal theory 3. increased focus on astrophysics and cosmology 4. large informal poster session (170 posters) in prime time 5. convenient, contiguous venues for all sessions and lodging 6. landmark locations for the reception and banquet. The conference program consisted of three days of parallel sessions and three days of plenary talks.

Proceedings of the Topical Sessions on Media Relations held in June 2004 and 2005

International Nuclear Information System (INIS)

2006-01-01

An effective media strategy, including timely interaction with them is an indispensable tool for organisations or institutions involved in radioactive waste management. With this in mind, the Forum on Stakeholder Confidence (FSC) set up a Group on Communication and Outreach with a twofold objective: to assist FSC members in communicating with the radioactive waste management community, to assist FSC members in reaching a broader public. As part of this assignment, the Group organised two Topical Sessions on media strategy, in conjunction with the 2004 and 2005 FSC meetings. The main objective was to learn about the functioning of the media organisations, their structures and needs, with speakers chosen to represent the range of such media, as well as different countries and varying radioactive waste situations that may serve as illustrative examples, given the vast differences that may prevail between local, national, and international radioactive waste management situations and their treatment by the media. The sessions were attended by representatives of policy makers, regulators and implementers from the FSC organisations. The presentations and discussions illustrated current media strategies, best practices, successes and failures and lessons learn. These proceedings consist of a summary of the main points made by each speaker as well a collation of their papers

Temporal Deductive Verification of Basic ASM Models

OpenAIRE

Daho, Hocine El-Habib; University of Oran; Benhamamouch, Djillali; University of Oran

2010-01-01

Abstract State Machines (ASMs, for short) provide a practical new computational model which has been applied in the area of software engineering for systems design and analysis. However, reasoning about ASM models occurs, not within a formal deductive system, but basically in the classical informal proofs style of mathematics. Several formal verification approaches for proving correctness of ASM models have been investigated. In this paper we consider the use of the TLA+logic for the deductive...

Meeting the difficulties of an ASME calibration for pipe welds

Energy Technology Data Exchange (ETDEWEB)

Ginzel, E., E-mail: eginzel@mri.on.ca [Materials Research Inst., Waterloo, Ontario (Canada); Ginzel, R.; Buchholz, J., E-mail: rginzel@eclipsescientific.com [Eclipse Scientific, Waterloo, Ontario (Canada)

2013-11-15

The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel code Section V deals with Non-Destructive Testing (NDT). In North America the use of ASME Sec. V is not always limited to just ASME regulated projects. Even such seemingly unrelated Standards as CSA Z662 (the Canadian construction standard for Oil and Gas Pipeline Systems) references this document for some aspects of the NDT. ASME has several codes that are dedicated to piping welds, for example ASME 31.1, 31.3 and 31.8. All of them reference back to ASME Section V Article 4 for the accepted techniques to use when UT is the examination option, but sometimes ASME is not very helpful. As they try to leave options open in one area they close the doors in others, or so it seems when reading the clauses as mandatory where you see the word 'shall'. This paper will attempt to layout the issues with pipe weld inspections as per Article 4, 2011 edition. Like all other codes and standards, ASME is a regulated standard that is regularly reviewed and updated, and one must be careful to reference the year of the edition being used. For the purposes of this paper we have used the 2010/11 edition. (author)

Meeting the difficulties of an ASME calibration for pipe welds

International Nuclear Information System (INIS)

Ginzel, E.; Ginzel, R.; Buchholz, J.

2013-01-01

The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel code Section V deals with Non-Destructive Testing (NDT). In North America the use of ASME Sec. V is not always limited to just ASME regulated projects. Even such seemingly unrelated Standards as CSA Z662 (the Canadian construction standard for Oil and Gas Pipeline Systems) references this document for some aspects of the NDT. ASME has several codes that are dedicated to piping welds, for example ASME 31.1, 31.3 and 31.8. All of them reference back to ASME Section V Article 4 for the accepted techniques to use when UT is the examination option, but sometimes ASME is not very helpful. As they try to leave options open in one area they close the doors in others, or so it seems when reading the clauses as mandatory where you see the word 'shall'. This paper will attempt to layout the issues with pipe weld inspections as per Article 4, 2011 edition. Like all other codes and standards, ASME is a regulated standard that is regularly reviewed and updated, and one must be careful to reference the year of the edition being used. For the purposes of this paper we have used the 2010/11 edition. (author)

Special Sessions: International Conference on Rehabilitation Engineering (2nd, Ottawa, Canada, June 17-22, 1984). Combined with RESNA 7th Annual Conference = Seances speciales: conference internationale sur la technologie de reeducation fonctionnelle (2nd, Ottawa, Canada, Juin 17-22, 1984). Tenue parallelement a la RESNA 7e conference annuelle.

Science.gov (United States)

Rehabilitation Engineering Society of North America, Washington, DC.

These proceedings of the conference's Special Sessions contain 85 papers organized into the following sections: "Implant Materials and Devices,""Communication Aids,""Neural Prosthetics for the Disabled,""Current Concepts in Spinal Cord Rehabilitation,""New Models in…

International conference on high-energy physics. Volume 1. Sessions I to III. [Geneva, June 27-July 4, 1979

Energy Technology Data Exchange (ETDEWEB)

1980-02-01

Volume 1 of the conference proceedings contains sessions on neutrino physics and weak interactions, e/sup +/e/sup -/ physics, and theory. Five of the papers have already been cited in ERA, and can be found by reference to the entry CONF-790642-- in the Report Number Index. The remaining 30 will be processed as they are received on the Atomindex tape. (RWR)

An example of a component replacement when applying ASME N509 and ASME N510 to older ventilation systems

Energy Technology Data Exchange (ETDEWEB)

Arndt, T.E. [Westinghouse Hanford Company, Richland, WA (United States)

1995-02-01

This paper presents an example of a component replacement (electric heater) when installed in an older ventilation system that was constructed before the issuance of ASME N509{sup 1} and N510{sup 2}. Many of the existing ventilation systems at the Hanford Site were designed, fabricated, and installed before the issuance of ASME N509{sup 1} and N510{sup 2}. Requiring the application of these codes to existing ventilation systems presents challenges to the engineer when design changes are needed. Although it may seem that the application of ASME N509{sup 1} or N510{sup 2} may be a hindrance at times, this does not need to occur. Proper preparation at the start of project or design modifications can minimize frustration to the engineer when it is judged that portions of ASME N509{sup 1} and N510{sup 2} do not apply in a particular application.

Proceedings of the 21st DOE/NRC nuclear air cleaning conference; Volume 2, Sessions 9--16

Energy Technology Data Exchange (ETDEWEB)

First, M.W. [ed.] [Harvard Univ., Boston, MA (United States). Harvard Air Cleaning Lab.

1991-02-01

The 21st meeting of the Department of Energy/Nuclear Regulatory Commission (DOE/NRC) Nuclear Air Cleaning Conference was held in San Diego, CA on August 13--16, 1990. The proceedings have been published as a two volume set. Volume 2 contains sessions covering adsorbents, nuclear codes and standards, modelling, filters, safety, containment venting and a review of nuclear air cleaning programs around the world. Also included is the list of attendees and an index of authors and speakers. (MHB)

Review of ASME-NH Design Materials for Creep-Fatigue

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Kim, Jong Bum

2010-01-01

To review and recommend the candidate design materials for the Sodium-Cooled Fast Reactor, the material sensitivity evaluations by the comparison of design data between the ASME-NH materials were performed by using the SIE ASME-NH computer program implementing the material database of the ASME-NH. The design material data provided by the ASME-NH code are the elastic modulus and yield Strength, Time-Independent Allowable Stress Intensity value, time-dependent allowable stress intensity value, expected minimum stress-to rupture value, stress rupture Factors for weldment, isochronous stress-strain curves, and design fatigue curves. Among these, the data related with the creep-fatigue evaluation are investigated in this study

Gecat 2004; Gecat 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

Here are given the abstracts of the speeches and the posters presented at the conference 'GECAT 2004'. The thema dealt with here are in particular the catalytic depollution (water treatment, hydro-desulfurization, removal of volatile organic compounds) and the nano-structures in catalysis (catalysis by gold, preparation and application of nano-tubes and nano-fibers). (O.M.)

Gecat 2004; Gecat 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

Here are given the abstracts of the speeches and the posters presented at the conference 'GECAT 2004'. The thema dealt with here are in particular the catalytic depollution (water treatment, hydro-desulfurization, removal of volatile organic compounds) and the nano-structures in catalysis (catalysis by gold, preparation and application of nano-tubes and nano-fibers). (O.M.)

THE 3rd SCHIZOPHRENIA INTERNATIONAL RESEARCH SOCIETY CONFERENCE, 14-18 APRIL 2012, FLORENCE, ITALY: SUMMARIES OF ORAL SESSIONS

Science.gov (United States)

Abbs, Brandon; Achalia, Rashmin M; Adelufosi, Adegoke O; Aktener, Ahmet Yiğit; Beveridge, Natalie J; Bhakta, Savita G; Blackman, Rachael K; Bora, Emre; Byun, MS; Cabanis, Maurice; Carrion, Ricardo; Castellani, Christina A; Chow, Tze Jen; Dmitrzak-Weglarz, M; Gayer-Anderson, Charlotte; Gomes, Felipe V; Haut, Kristen; Hori, Hiroaki; Kantrowitz, Joshua T; Kishimoto, Taishiro; Lee, Frankie HF; Lin, Ashleigh; Palaniyappan, Lena; Quan, Meina; Rubio, Maria D; Ruiz de Azúa, Sonia; Sahoo, Saddichha; Strauss, Gregory P; Szczepankiewicz, Aleksandra; Thompson, Andrew D; Trotta, Antonella; Tully, Laura M; Uchida, Hiroyuki; Velthorst, Eva; Young, Jared W; O’Shea, Anne; DeLisi, Lynn E.

2013-01-01

The 3rd Schizophrenia International Research Society Conference was held in Florence, Italy, April 14-18, 2012.and this year had as its emphasis, “The Globalization of Research”. Student travel awardees served as rapporteurs for each oral session and focused their summaries on the most significant findings that emerged and the discussions that followed. The following report is a composite of these summaries. We hope that it will provide an overview for those who were present, but could not participate in all sessions, and those who did not have the opportunity to attend, but who would be interested in an update on current investigations ongoing in the field of schizophrenia research. PMID:22910407

Nordic wind power conference 2007. Proceedings

International Nuclear Information System (INIS)

Cutululis, Nicolaos; Soerensen, Poul

2007-11-01

This fourth Nordic Wind Power Conference was focused on power system integration and electrical systems of wind turbines and wind farms. NWPC presents the newest research results related to technical electrical aspects of wind power, spanning from power system integration to electrical design and control of wind turbines. The first NWPC was held in Trondheim (2000), Norway, the second in Gothenburg (2004), Sweden, and the third in Espoo (2006), Finland. Invited speakers, oral presentation of papers and poster sessions ensured this to be a valuable event for professionals and high-level students wanting to strengthen their knowledge on wind power integration and electrical systems. (au)

Nordic wind power conference 2007. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Cutululis, N; Soerensen, P [eds.

2007-11-15

This fourth Nordic Wind Power Conference was focused on power system integration and electrical systems of wind turbines and wind farms. NWPC presents the newest research results related to technical electrical aspects of wind power, spanning from power system integration to electrical design and control of wind turbines. The first NWPC was held in Trondheim (2000), Norway, the second in Gothenburg (2004), Sweden, and the third in Espoo (2006), Finland. Invited speakers, oral presentation of papers and poster sessions ensured this to be a valuable event for professionals and high-level students wanting to strengthen their knowledge on wind power integration and electrical systems. (au)

Abstracts of the Canadian Society for Civil Engineering annual conference including the general conference, the 1. international structural specialty conference, the 1. international construction specialty conference, and the 1. specialty conference on disaster mitigation : towards a sustainable future

International Nuclear Information System (INIS)

El-Badry, M.; Loov, R.E.; Ruwanpura, J.; El-Hacha, R.; Kroman, J.; Rankin, J.

2006-01-01

This conference provided a forum for national and international practicing engineers, researchers and technical experts to discuss sustainable solutions to infrastructure development. Discussions focused on recent developments in new technologies for building more economic and sustainable infrastructure, while improving the safety of buildings, bridges, roads, water supply and sewage treatment systems. The conference was held in conjunction with associated specialty conferences, including a first international structures specialty conference, a first international construction specialty conference, and a first specialty conference on disaster mitigation. This book of abstracts highlights all the specialty conferences and accompanies a CD-ROM that has the full text of all the papers. Manuscripts of the full papers submitted to the specialty conferences were peer-reviewed by international scientific committees. The general conference provided a forum to learn about new technologies and future directions in various areas of civil engineering. It included a special theme session on sustainable development and a special session on innovation and information technology. Other technical sessions focused on topics such as civil engineering history and education; infrastructure management and renewal; asset management; risk assessment and management; engineering materials and mechanics; environmental engineering and science; hydrotechnical engineering; cold region engineering; and, transportation engineering. The general conference featured 88 presentations, of which 15 have been catalogued separately for inclusion in this database

Report on the Current Technical Issues on ASME Nuclear Code and Standard

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Lee, B. S.; Yoo, S. H.

2008-11-01

This report describes the analysis on the current revision movement related to the mechanical design issues of the U.S ASME nuclear code and standard. ASME nuclear mechanical design in this report is composed of the nuclear material, primary system, secondary system and high temperature reactor. This report includes the countermeasures based on the ASME Code meeting for current issues of each major field. KAMC(ASME Mirror Committee) of this project is willing to reflect a standpoint of the domestic nuclear industry on ASME nuclear mechanical design and play a technical bridge role for the domestic nuclear industry in ASME Codes application

International Conference on Nuclear Security: Enhancing Global Efforts. Summary of an International Conference

International Nuclear Information System (INIS)

2014-01-01

The International Conference on Nuclear Security: Enhancing Global Efforts was organized by the IAEA and held in Vienna on 1-5 July 2013. The conference was organized in cooperation with the following organizations and initiatives: the European Union; the Global Initiative to Combat Nuclear Terrorism (GICNT); the International Criminal Police Organization (INTERPOL); the Institute of Nuclear Materials Management (INMM); the Nuclear Threat Initiative (NTI); the Organization for Security and Co-operation in Europe (OSCE); the Partnership for Global Security; the Police Community of the Americas (AMERIPOL); the United Nations Interregional Crime and Justice Research Institute (UNICRI); the United Nations Office on Drugs and Crime (UNODC); the World Institute for Nuclear Security (WINS); the World Nuclear Association (WNA); and the World Nuclear Transport Institute (WNTI). A total of 34 ministers participated in the ministerial session of the conference. Altogether, the conference attracted more than 1300 registered participants from 125 IAEA Member States and 21 organizations. The aim of the conference was to review the international community's experience and achievements to date in strengthening nuclear security, to enhance the understanding of current approaches to nuclear security worldwide and identify trends, and to provide a global forum for ministers, policymakers and senior officials to formulate views on future directions and priorities for nuclear security. This book contains the President's Summary of the conference and a summary of the ministerial session, the full text of the ministerial declaration adopted by the conference and summaries of the main conference sessions. The attached CD-ROM contains the full conference programme, the list of conference participants, the national statements from the ministerial session and a selection of papers

Nuclear innovation through collaboration. 35th Annual CNS conference and 39th CNS/CNA student conference

International Nuclear Information System (INIS)

2015-01-01

The Canadian Nuclear Society (CNS) held its 35th Annual Conference in Saint John, New Brunswick, Canada on May 31 to June 3, 2015, combined with the 39th Annual CNS/CNA Student Conference. With the theme of the conference, 'Nuclear Innovation through Collaboration', more than 425 delegates, exhibitors and students were in attendance. The conference commenced with two strong plenary sessions on Utility Collaborations to Improve Lifetime Performance; and, Performance Improvement Programs: Goals and Experience. The second day consisted of the panel discussions on International Developments in Used Nuclear Fuel Repository Programs, and two plenary sessions on: Enterprise Risk Management; and, Vendor Role in a Continuously Improving Industry. The third day contained a number of interesting features, including plenary sessions on Waste Management and Decommissioning; Developing Technologies and Resources, and a panel discussion on the Transportation of Used Nuclear Fuel. All three days of the conference also contained parallel sessions with over 100 technical papers presented at the main and student sessions. The technical session titles were: Refurbishment and Life Extension; Thermalhydraulics; Nuclear Materials; WMD - Radiation Monitoring; Safety and Licensing; Communication; Safety and Licensing; Instrumentation and Control; Advanced Reactor Designs; WMD - Deep Geological Repository Packaging; Reactor Physics; Chemistry and Materials; Advanced Fuel Cycles; Waste Management and Decommissioning; and, Medical Physics and Radiation Biology.

Regulation of dynein-mediated autophagosomes trafficking by ASM in CASMCs.

Science.gov (United States)

Xu, Ming; Zhang, Qiufang; Li, Pin-Lan; Nguyen, Thaison; Li, Xiang; Zhang, Yang

2016-01-01

Acid sphingomyelinase (ASM; gene symbol Smpd1) has been shown to play a crucial role in autophagy maturation by controlling lysosomal fusion with autophagosomes in coronary arterial smooth muscle cells (CASMCs). However, the underlying molecular mechanism by which ASM controls autophagolysosomal fusion remains unknown. In primary cultured CASMCs, lysosomal Ca2+ induced by 7-ketocholesterol (7-Ket, an atherogenic stimulus and autophagy inducer) was markedly attenuated by ASM deficiency or TRPML1 gene silencing suggesting that ASM signaling is required for TRPML1 channel activity and subsequent lysosomal Ca(2+) release. In these CASMCs, ASM deficiency or TRPML1 gene silencing markedly inhibited 7-Ket-induced dynein activation. In addition, 7-Ket-induced autophagosome trafficking, an event associated with lysosomal Ca(2+) release and dynein activity, was significantly inhibited in ASM-deficient (Smpd1(-/-)) CASMCs compared to that in Smpd1(+/+) CASMCs. Finally, overexpression of TRPML1 proteins restored 7-Ket-induced lysosomal Ca(2+) release and autophagosome trafficking in Smpd1-/- CASMCs. Collectively, these results suggest that ASM plays a critical role in regulating lysosomal TRPML1-Ca(2+) signaling and subsequent dynein-mediated autophagosome trafficking, which leads its role in controlling autophagy maturation in CASMCs under atherogenic stimulation.

ASME nuclear codes and standards risk management strategic planning

International Nuclear Information System (INIS)

Hill, Ralph S. III; Balkey, Kenneth R.; Erler, Bryan A.; Wesley Rowley, C.

2007-01-01

This paper is prepared in honor and in memory of the late Professor Emeritus Yasuhide Asada to recognize his contributions to ASME Nuclear Codes and Standards initiatives, particularly those related to risk-informed technology and System Based Code developments. For nearly two decades, numerous risk-informed initiatives have been completed or are under development within the ASME Nuclear Codes and Standards organization. In order to properly manage the numerous initiatives currently underway or planned for the future, the ASME Board on Nuclear Codes and Standards (BNCS) has an established Risk Management Strategic Plan (Plan) that is maintained and updated by the ASME BNCS Risk Management Task Group. This paper presents the latest approved version of the plan beginning with a background of applications completed to date, including the recent probabilistic risk assessment (PRA) standards developments for nuclear power plant applications. The paper discusses planned applications within ASME Nuclear Codes and Standards that will require expansion of the ASME PRA Standard to support new advanced light water reactor and next generation reactor developments, such as for high temperature gas-cooled reactors. Emerging regulatory developments related to risk-informed, performance- based approaches are summarized. A long-term vision for the potential development and evolution to a nuclear systems code that adopts a risk-informed approach across a facility life-cycle (design, construction, operation, maintenance, and closure) is also summarized. Finally, near term and long term actions are defined across the ASME Nuclear Codes and Standards organizations related to risk management, including related U.S. regulatory activities. (author)

PATRAM 2004 - The 14th international symposium on the packaging and transportation of radioactive materials. Conference proceedings

International Nuclear Information System (INIS)

2004-01-01

The 14th International Symposium on the Packaging and Transport of Radioactive Materials, PATRAM 2004, was held at the Estrel Convention Center in Berlin, Germany, from 20-24 September 2004. PATRAM '04 was held under the auspices of the German Federal Ministry for Transport, Building and Housing (BMNBW), and was hosted by the German Bundesanstalt fur Materialforschung und -Prufung (BAM). Further, the conference was held in cooperation with the International Atomic Energy Agency (IAEA) and the US Institute for Nuclear Materials Management. As with past PATRAM conferences, this one covered a wide range of topics that are of concern to the nuclear materials transport industry; regulations, operations, technical analyses and testing, design, institutional issues, security, risk assessment and emergency response. Presentation of these topics was provided through a number of fora, plenary presentations, panel presentations, oral presentations, posters and technical tours. Coupled with the opening reception on Monday evening and the coffee breaks, a forum was provided at this PATRAM that allowed all participants ample opportunities to increase their technical knowledge, to learn about compelling issues around the world and to network with colleagues. (orig.)

PATRAM 2004 - The 14th international symposium on the packaging and transportation of radioactive materials. Conference proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The 14th International Symposium on the Packaging and Transport of Radioactive Materials, PATRAM 2004, was held at the Estrel Convention Center in Berlin, Germany, from 20-24 September 2004. PATRAM '04 was held under the auspices of the German Federal Ministry for Transport, Building and Housing (BMNBW), and was hosted by the German Bundesanstalt fur Materialforschung und -Prufung (BAM). Further, the conference was held in cooperation with the International Atomic Energy Agency (IAEA) and the US Institute for Nuclear Materials Management. As with past PATRAM conferences, this one covered a wide range of topics that are of concern to the nuclear materials transport industry; regulations, operations, technical analyses and testing, design, institutional issues, security, risk assessment and emergency response. Presentation of these topics was provided through a number of fora, plenary presentations, panel presentations, oral presentations, posters and technical tours. Coupled with the opening reception on Monday evening and the coffee breaks, a forum was provided at this PATRAM that allowed all participants ample opportunities to increase their technical knowledge, to learn about compelling issues around the world and to network with colleagues. (orig.)

AsmL Specification of a Ptolemy II Scheduler

DEFF Research Database (Denmark)

Lázaro Cuadrado, Daniel; Koch, Peter; Ravn, Anders Peter

2003-01-01

Ptolemy II is a tool that combines different computational models for simulation and design of embedded systems. AsmL is a software specification language based on the Abstract State Machine formalism. This paper reports on development of an AsmL model of the Synchronous Dataflow domain scheduler...

Heat exchanger technologies for the global environment. PWR-Vol. 25

International Nuclear Information System (INIS)

Maurer, J.R.

1994-01-01

This is the Committee's largest compilation of papers in the fourteen years that ASME has sponsored one or more sessions at the Joint Power Generation Conference. In addition to the twenty-two papers offered at the conference, one session contained a panel discussion during which five industry specialists related their experiences and interpretations. Many of the presentations of the past few years have been made by authors from foreign lands as the conference has expanded to an international forum. This years' theme of global impact is included in the heat exchanger presentations from the USA and abroad. In addition, ASME has encouraged authors to make the subjects of their presentations more apropos to current concerns. New concepts and designs, particularly with PC programs in mind, is one specific area that is addressed. Other topics such as materials selection, coatings to extend performance life, minimizing the effects of microbiologically influenced corrosion, zebra mussel control and new approaches to heat transfer design are some of the subjects covered at the conference and in this volume. Nineteen papers have been processed separately for inclusion in the appropriate data bases

International conference on knowledge management in nuclear facilities. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-06-15

In recent years new issues have emerged in Member States, including ageing facilities and personnel, nuclear phase-out policies, the expectation of nuclear growth in some regions and the objective to further improve the economic competitiveness of nuclear energy while maintaining a high level of safety. Awareness of the importance of nuclear knowledge management in addressing the challenges the industry is facing has grown significantly, both in the industry and in regulatory authorities, and a large number of projects are under way. Knowledge management is becoming an important element of the organizational behaviour of the nuclear industry. In 2002, the IAEA General Conference adopted a new resolution on Nuclear Knowledge, emphasizing the importance of nuclear knowledge management. The resolution was reiterated in subsequent years. This conference is organized in response to those resolutions, also following the first conference on Nuclear Knowledge Management - Strategies, Information Management and Human Resource Development, organized by the IAEA in 2004 in France. The objectives of the conference are to: - Take stock of the recent developments in nuclear knowledge management; - Demonstrate and discuss the benefits of nuclear knowledge management in promoting excellence in operation and safety of nuclear facilities; - Promote the use of nuclear knowledge management in the nuclear industry; - Provide insights and recommendations to the nuclear community. The conference will address decision makers and professionals in the nuclear industry, including in particular all nuclear facilities in all phases of their life cycle, and from regulatory organizations, governments, academia, vendors and other bodies concerned with the topic. The conference will start with a policy forum: Policy Forum: Status, Strategic Perspectives and Key Issues Leaders from nuclear industry, governmental organizations, regulators, research institutes and international organizations will

Asthma & COPD--IQPC's Second Conference.

Science.gov (United States)

Catley, Matthew C

2010-09-01

The International Quality & Productivity Center's (IQPC) Second Asthma & COPD conference, held in Philadelphia, included topics covering new therapeutic developments in the field of asthma and COPD. This conference report highlights selected presentations on mAb treatments for asthma, including targeting IL-5, IL-13, IL-9 and TNFa, CCR3 inhibitors, histamine H4 receptor inhibition, novel mouse models of COPD and inhaled antisense asthma therapies. Investigational drugs discussed include mepolizumab (GlaxoSmithKline plc), benralizumab (BioWa Inc/Kyowa Hakko Kirin Co Ltd/MedImmune LLC), AMG-317 (Amgen Inc/Takeda Bio Development Center Ltd), TPI-ASM-8 (Pharmaxis Ltd) and AIR-645 (Altair Therapeutics Inc).

4th micro and nano flows conference (book of abstracts)

OpenAIRE

König, CS; Karayiannis, TG; Balabani, S; 4th Micro and Nano Flows Conference (MNF2014)

2014-01-01

This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, U...

Speed Posters: An Alternative to Traditional Poster and Podium Sessions.

Science.gov (United States)

Wagnes, Lisa D

2016-08-01

Speed posters were used as an alternative concurrent session option during a national nursing education conference. The session format was received positively by both participants and presenters, and, as a result, recommendations for use were developed by the conference planners. J Contin Educ Nurs. 2016;47(8):344-346. Copyright 2016, SLACK Incorporated.

Nuclear innovation through collaboration. 35th Annual CNS conference and 39th CNS/CNA student conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-07-01

The Canadian Nuclear Society (CNS) held its 35th Annual Conference in Saint John, New Brunswick, Canada on May 31 to June 3, 2015, combined with the 39th Annual CNS/CNA Student Conference. With the theme of the conference, 'Nuclear Innovation through Collaboration', more than 425 delegates, exhibitors and students were in attendance. The conference commenced with two strong plenary sessions on Utility Collaborations to Improve Lifetime Performance; and, Performance Improvement Programs: Goals and Experience. The second day consisted of the panel discussions on International Developments in Used Nuclear Fuel Repository Programs, and two plenary sessions on: Enterprise Risk Management; and, Vendor Role in a Continuously Improving Industry. The third day contained a number of interesting features, including plenary sessions on Waste Management and Decommissioning; Developing Technologies and Resources, and a panel discussion on the Transportation of Used Nuclear Fuel. All three days of the conference also contained parallel sessions with over 100 technical papers presented at the main and student sessions. The technical session titles were: Refurbishment and Life Extension; Thermalhydraulics; Nuclear Materials; WMD - Radiation Monitoring; Safety and Licensing; Communication; Safety and Licensing; Instrumentation and Control; Advanced Reactor Designs; WMD - Deep Geological Repository Packaging; Reactor Physics; Chemistry and Materials; Advanced Fuel Cycles; Waste Management and Decommissioning; and, Medical Physics and Radiation Biology.

A user's perspective on the merits and shortcomings of ASME Section III

International Nuclear Information System (INIS)

Antaki, G.A.

1994-01-01

There are several aspects of Section III which when compared to process industry codes (ASME VIII, ASME B31.3, API, etc.) have proven to be a significant improvement in engineering practice. There are, however, other aspects of ASME III which have added to costs without clear benefits in safety or reliability. The authors present a user's perspective on some of the relative merits and shortcomings of the nuclear codes (ASME III and XI) compared to the process industry codes (such as ASME VIII, B31.3 and API)

Undergraduate Researchers and the Poster Session

Science.gov (United States)

Johnson, Gail; Green, Raymond

2007-01-01

Undergraduates presented original research in classroom poster sessions open to students, faculty, and friends. We assessed the reaction of the students to the experience and their reported change in their interest in presenting at conferences. Students enjoyed the poster session experience and indicated they preferred this method over other…

The 9. European nuclear conference; La 9. conference nucleaire europeenne

Energy Technology Data Exchange (ETDEWEB)

Maurel, V.; Lewis, D.; Smirnov, V.P.; Gutierrez, J.E.; Paulin, Ph.; Markov, D.V.; Smirnov, A.V.; Polenok, V.S.; Horhoianu, G.; Olteanu, G.; Van der Schaaf, B.; Gavillet, D.; Lapena, J.; Ohms, C.; Roth, A.; Van Dyck, St.; Mardon, J.P.; Thomas, A.; Cipiere, M.F.; Faidy, C.; Hedin, F.; Delnondedieu, M.; Chassignole, B.; Doudet, L.; Dupond, O.; Kang, K.; Park, K.; Kim, K.; Ha, J.; Hoon-Seok, Jung; Yong-koo, Lee; Kwang-Ho, Kim; Seungwoo, Paek; Heui-Joo, Choi; Do-Hee, Ahn; Kwang-Rag, Kim; Minsoo, Lee; Sung-Paal, Yim; Hongsuk, Chung; Detroux, P.; Meessen, O.; Defloor, J.; Lars-Erik, Holm; Barescut, J.C.; Vacquier, B.; Laurier, D.; Caer, S.; Quesne, B.; Oudalova, A.; Geras' kin, St.; Dikarev, V.; Dikareva, N.; Chernonog, E.; Yang-Geun, Chung; Gab-Bock, Lee; Sun-Young, Bang; Yong-Sun, Lee; Bolognese-Milsztajn, T.; Frank, D.; Lacoste, V.; Pihet, P.; Lacronique, J.F.; Chauliac, C.; Verwaerde, D.; Pavageau, O.; Zaetta, A.; Varaine, F.; Warin, D.; Hudelot, J.P.; Bioux, Ph.; Klann, R.; Petruzzi, A.; D' auria, F.; Yung Kwon, Jin; Chul Jin, Chol; Mihalache, M.; Radu, V.; Pavelescu, M.; Schneidesch, Ch.R.; Jinzhao, Zhang; Dalleur, J.P.; Nuttin, A.; Meplan, O.; Wilson, J.; Perdu, F.; Campioni, G.; Mounier, C.; Sigrist, J.F.; Laine, Ch.; Broc, D.; Robbe, M.F.; Cariou, Y.; Seok-Kyun, Yoon; Win, Naing; Myung-Hyun, Kim; Kyung, Hee; Fridman, E.; Shwageraus, E.; Galperin, A.; Meplan, O.; Laulan, O.; Mechel-Sendis, F.; Belgaid, M.; Kadem, F.; Amokrane, A.; Hamidouche, T.; El-Khider, Si-Ahmed

2005-11-15

This issue gathers the abstracts of the papers presented at the ninth European nuclear conference (ENC-2005). The main part of the conference is split into 20 sessions. These sessions cover all technical aspects of nuclear power, from reactor design to waste management, without forgetting experimental and research reactors, reactor dismantling, economy, resources, safety, radioprotection and education issues. Perspectives of a nuclear renaissance are clearly visible in the world. This renaissance, mainly due to political, economical, societal and ecological factors, is fuelled by scientific and technical progress. This conference was the opportunity to present together these aspects of nuclear power and to analyze their mutual interactions.

Significant issues and changes for ANSI/ASME OM-1 1981, part 1, ASME OMc code-1994, and ASME OM Code-1995, Appendix I, inservice testing of pressure relief devices in light water reactor power plants

Energy Technology Data Exchange (ETDEWEB)

Seniuk, P.J.

1996-12-01

This paper identifies significant changes to the ANSI/ASME OM-1 1981, Part 1, and ASME Omc Code-1994 and ASME OM Code-1995, Appendix I, {open_quotes}Inservice Testing of Pressure Relief Devices in Light-Water Reactor Power Plants{close_quotes}. The paper describes changes to different Code editions and presents insights into the direction of the code committee and selected topics to be considered by the ASME O&M Working Group on pressure relief devices. These topics include scope issues, thermal relief valve issues, as-found and as-left set-pressure determinations, exclusions from testing, and cold setpoint bench testing. The purpose of this paper is to describe some significant issues being addressed by the O&M Working Group on Pressure Relief Devices (OM-1). The writer is currently the chair of OM-1 and the statements expressed herein represents his personal opinion.

Significant issues and changes for ANSI/ASME OM-1 1981, part 1, ASME OMc code-1994, and ASME OM Code-1995, Appendix I, inservice testing of pressure relief devices in light water reactor power plants

International Nuclear Information System (INIS)

Seniuk, P.J.

1996-01-01

This paper identifies significant changes to the ANSI/ASME OM-1 1981, Part 1, and ASME Omc Code-1994 and ASME OM Code-1995, Appendix I, open-quotes Inservice Testing of Pressure Relief Devices in Light-Water Reactor Power Plantsclose quotes. The paper describes changes to different Code editions and presents insights into the direction of the code committee and selected topics to be considered by the ASME O ampersand M Working Group on pressure relief devices. These topics include scope issues, thermal relief valve issues, as-found and as-left set-pressure determinations, exclusions from testing, and cold setpoint bench testing. The purpose of this paper is to describe some significant issues being addressed by the O ampersand M Working Group on Pressure Relief Devices (OM-1). The writer is currently the chair of OM-1 and the statements expressed herein represents his personal opinion

Proceedings of the Columbia River Estuary Conference on Ecosystem Restoration.

Energy Technology Data Exchange (ETDEWEB)

U.S. Bonneville Power Administration

2008-08-01

The 2008 Columbia River Estuary Conference was held at the Liberty Theater in Astoria, Oregon, on April 19-20. The conference theme was ecosystem restoration. The purpose of the conference was to exchange data and information among researchers, policy-makers, and the public, i.e., interrelate science with management. Conference organizers invited presentations synthesizing material on Restoration Planning and Implementation (Session 1), Research to Reduce Restoration Uncertainties (Session 2), Wetlands and Flood Management (Session 3), Action Effectiveness Monitoring (Session 4), and Management Perspectives (Session 5). A series of three plenary talks opened the conference. Facilitated speaker and audience discussion periods were held at the end of each session. Contributed posters conveyed additional data and information. These proceedings include abstracts and notes documenting questions from the audience and clarifying answers from the presenter for each talk. The proceedings also document key points from the discussion periods at the end of each session. The conference program is outlined in the agenda section. Speaker biographies are presented in Appendix A. Poster titles and authors are listed in Appendix B. A list of conference attendees is contained in Appendix C.

United Nations Climate Change Conference. Nairobi 2006

International Nuclear Information System (INIS)

2006-01-01

Kenya hosted the second meeting of the Parties to the Kyoto Protocol (COP/MOP 2), in conjunction with the twelfth session of the Conference of the Parties to the Climate Change Convention (COP 12), in Nairobi from 6 to 17 November 2006. The conference also included, from 6 to 14 November, the twenty-fifth session of the Subsidiary Body for Scientific and Technological Advice (SBSTA 25), the twenty-fifth session of the Subsidiary Body for Implementation (SBI 25), and the second session of the Ad Hoc Working Group on Further Commitments for Annex I Parties under the Kyoto Protocol (AWG 2) including an in-session workshop. The site contains many of the reports and documents relevant to the conference

Application procedures and analysis examples of the SIE ASME-NH program

International Nuclear Information System (INIS)

Kim, Seok Hoon; Koo, G. H.; Kim, J. B.

2010-12-01

In this report, the design rule of the ASME-NH Code was briefly summarized and the application procedures of SIE ASME-NH program were analysed, the analysis examples were described. The SIE ASME-NH program was developed according to the ASME Code Section III Subsection NH rules to perform the primary stress limits, the accumulated inelastic strain limits and the creep fatigue damage evaluations in the structural design of nuclear power plants operating with high temperatures over creep temperature at normal operating conditions. In the analysis examples, the benchmark problem for the high temperature reactor vessel which was discussed in the SIE ASME-NH user's seminar was described. Also, the preliminary structural analysis of an Advanced Burner Test Reactor internal structure was described. Considering the load combinations of the various cycle types submitted from significant operating conditions, the integrity of a reactor internal structure was reviewed according to the stress and strain limits of the ASME-NH rules and the analysis and evaluation results were summarized

ASME nuclear codes and standards risk management strategic plan

International Nuclear Information System (INIS)

Balkey, Kenneth R.

2003-01-01

Over the past 15 years, several risk-informed initiatives have been completed or are under development within the ASME Nuclear Codes and Standards organization. In order to better manage the numerous initiatives in the future, the ASME Board on Nuclear Codes and Standards has recently developed and approved a Risk Management Strategic Plan. This paper presents the latest approved version of the plan beginning with a background of applications completed to date, including the recent issuance of the ASME Standard for Probabilistic Risk Assessment (PRA) for Nuclear Power Plant Applications. The paper discusses potential applications within ASME Nuclear Codes and Standards that may require expansion of the PRA Standard, such as for new generation reactors, or the development of new PRA Standards. A long-term vision for the potential development and evolution to a nuclear systems code that adopts a risk-informed approach across a facility life-cycle (design, construction, operation, maintenance, and closure) is summarized. Finally, near term and long term actions are defined across the ASME Nuclear Codes and Standards organizations related to risk management, and related U.S. regulatory activities are also summarized. (author)

Computer Program of SIE ASME-NH (Revision 1.0) Code

Energy Technology Data Exchange (ETDEWEB)

Koo, Gyeong Hoi; Lee, J. H

2008-01-15

In this report, the SIE ASME (Structural Integrity Evaluations by ASME-NH) (Revision 1.0), which has a computerized implementation of ASME Pressure Vessels and Piping Code Section III Subsection NH rules, is developed to apply to the next generation reactor design subjecting to the elevated temperature operations over 500 .deg. C and over 30 years design lifetime, and the user's manual for this program is described in detail.

Computer Program of SIE ASME-NH (Revision 1.0) Code

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Lee, J. H.

2008-01-01

In this report, the SIE ASME (Structural Integrity Evaluations by ASME-NH) (Revision 1.0), which has a computerized implementation of ASME Pressure Vessels and Piping Code Section III Subsection NH rules, is developed to apply to the next generation reactor design subjecting to the elevated temperature operations over 500 .deg. C and over 30 years design lifetime, and the user's manual for this program is described in detail

Recent development in the ASME O and M committee codes, standards, and guides

International Nuclear Information System (INIS)

Rowley, C.W.

1999-01-01

The ASME O and M Committee continues to expand and update its code, standards, and guides as contained in the ASME OM Code and the ASME OM Standards/Guides. This paper will describe recent changes to these two ASME documents, including technical inquiries, code cases, and the major reformat of the ASME OM Code 1998 Edition. Also two new Parts to the ASME OM S/G will be discussed: OM Part 23 and OM Part 24, which are close to being initially published. A third new Part to the ASME OM S/G has been authorized and has recently started to get organized: Part 26, 'Thermal Calibration of RTDs'. In addition this paper will describe the future plans for these two documents as provided in the O and M Committee Strategic Plan. (author)

Conference summary: Experiments in confinement and plasma-wall interaction and innovative confinement concept

International Nuclear Information System (INIS)

Ninomiya, H.

2005-01-01

This paper summarizes the results presented at the 20th IAEA Fusion Energy Conference 2004 in the sessions of confinement, plasma-wall interaction and innovative confinement concept. The highlights of the presentations are as follows. Long pulse operation with high beta and high bootstrap fraction much longer than the current diffusion time has been achieved. The discharge scenario optimization and its extrapolation towards ITER have progressed remarkably. Significant progress has been made in understanding of global confinement and transport physics. (author)

28th Linear Accelerator Conference

CERN Document Server

Facco, Alberto; McCausey, Amy; Schaa, Volker R W

2017-01-01

The 28th Linear Accelerator Conference, LINAC 16, to take place at the Kellogg Hotel and Conference Center in East Lansing, Michigan, on 25-30 September 2016. This conference is the main bi-yearly gathering for the world-wide community of linac specialists. It provides a unique opportunity to hear about the latest advances of projects and developments concerning hadron and lepton linacs, and their applications. In the tradition of previous LINAC conferences, plenary sessions including invited speakers are scheduled every day. Poster sessions will be held on Monday, Tuesday and Thursday afternoons. There will also be two special events on Sunday, 25 September 2016, namely a student poster session and an evening reception for registrants and their companions at the Kellogg Hotel and Conference Center. Participants are also warmly invited to join an outing to Lake Michigan and the beautiful surroundings on Wednesday afternoon, and to visit the Facility for Rare Isotope Beams on Friday afternoon, after the formal...

Future direction of ASME nuclear codes and standards

International Nuclear Information System (INIS)

Ennis, Kevin; Sheehan, Mark E.

2003-01-01

While the nuclear power industry in the US is in a period of stasis, there continues to be a great deal of activity in the ASME nuclear standards development arena. As plants age, the need for new approaches in standardization changes with the changing needs of the industry. New tools are becoming available in the form of risk analysis, and this is finding its way into more and more of ASME's standards activities. This paper will take a look at the direction that ASME nuclear Codes and Standards are heading in this and other areas, as well as taking a look at some advance reactor concepts and plans for standards to address new technologies

Scientific conference proceedings. Session 3

International Nuclear Information System (INIS)

Bartosek, V.

1985-01-01

The Radiochemical Technology session met at UJV Rez on June 7, 1985 to hear 13 papers of which 11 were incorporated in INIS. The papers inform of results attained in the field of processing liquid radioactive wastes from nuclear power plants, processing spent nuclear fuel using the fluoride process, of the separation of fission products by dicarbolide extraction, the chemistry of complex uranium compounds, etc. The cooperation of UJV with VUJE and VUCHZ is also dealt with. (E.S.)

Dynamic fracture toughness of ASME SA508 Class 2a ASME SA533 grade A Class 2 base and heat affected zone material and applicable weld metals

International Nuclear Information System (INIS)

Logsdon, W.A.; Begley, J.A.; Gottshall, C.L.

1978-03-01

The ASME Boiler and Pressure Vessel Code, Section III, Article G-2000, requires that dynamic fracture toughness data be developed for materials with specified minimum yield strengths greater than 50 ksi to provide verification and utilization of the ASME specified minimum reference toughness K/sub IR/ curve. In order to qualify ASME SA508 Class 2a and ASME SA533 Grade A Class 2 pressure vessel steels (minimum yield strengths equal 65 kip/in. 2 and 70 kip/in. 2 , respectively) per this requirement, dynamic fracture toughness tests were performed on these materials. All dynamic fracture toughness values of SA508 Class 2a base and HAZ material, SA533 Grade A Class 2 base and HAZ material, and applicable weld metals exceeded the ASME specified minimum reference toughness K/sub IR/ curve

Nuclear the next generation. 34th Annual Canadian Nuclear Society conference and 37th CNS/CNA student conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-01

The 34th Annual Canadian Nuclear Society Conference and 37th CNS/CNA Student Conference was held in Toronto, Ontario, Canada on June 10-13, 2013. With the theme of the conference, 'Nuclear the Next Generation{sup ,} the conference actively engaged 400 participants in the many facets of this well-rum event. The conference combined excellent plenary speakers, a full set of technical papers, challenging student poster competitions, and interesting exhibits. The plenary session focussed on the themes: 'Nuclear Power - a Business Driver for the Next Generation'; and, 'Designing - the Next Generation'. The technical session titles were: Reactor and Radiation Physics; Environment and Spent Fuel Management; Operations and Maintenance; Fusion Science and Technology; Advanced Reactors and Fuels; Plant Life Extension, Refurbishment and Aging; Safety and Licensing; Chemistry and Materials; and, Thermalhydraulics. The student conference session was well attended and completed the 4 day event.

Proceedings of the Third NRC/ASME Symposium on Valve and Pump Testing. Session 1A--Session 2C: Volume 1

International Nuclear Information System (INIS)

1994-07-01

The 1994 Symposium on Valve and Pump Testing, jointly sponsored by the Board of Nuclear Codes and Standards of the American Society of Mechanical Engineers and by the Nuclear Regulatory Commission, provides a forum for the discussion of current programs and methods for inservice testing and motor-operated valve testing at nuclear power plants. The symposium also provides an opportunity to discuss the need to improve that testing in order to help ensure the reliable performance of pumps and valves. The participation of industry representatives, regulators, and consultants results in the discussion of a broad spectrum of ideas and perspectives regarding the improvement of inservice testing of pumps and valves at nuclear power plants. This document, Volume 1, covers sessions 1A through session 2C. The individual papers have been cataloged separately

Proceedings of the Third NRC/ASME Symposium on Valve and Pump Testing. Session 1A--Session 2C: Volume 1

Energy Technology Data Exchange (ETDEWEB)

1994-07-01

The 1994 Symposium on Valve and Pump Testing, jointly sponsored by the Board of Nuclear Codes and Standards of the American Society of Mechanical Engineers and by the Nuclear Regulatory Commission, provides a forum for the discussion of current programs and methods for inservice testing and motor-operated valve testing at nuclear power plants. The symposium also provides an opportunity to discuss the need to improve that testing in order to help ensure the reliable performance of pumps and valves. The participation of industry representatives, regulators, and consultants results in the discussion of a broad spectrum of ideas and perspectives regarding the improvement of inservice testing of pumps and valves at nuclear power plants. This document, Volume 1, covers sessions 1A through session 2C. The individual papers have been cataloged separately.

Penetration of ASM 981 in canine skin: a comparative study.

Science.gov (United States)

Gutzwiller, Meret E Ricklin; Reist, Martin; Persohn, Elke; Peel, John E; Roosje, Petra J

2006-01-01

ASM 981 has been developed for topical treatment of inflammatory skin diseases. It specifically inhibits the production and release of pro-inflammatory cytokines. We measured the skin penetration of ASM 981 in canine skin and compared penetration in living and frozen skin. To make penetration of ASM 981 visible in dog skin, tritium labelled ASM 981 was applied to a living dog and to defrosted skin of the same dog. Using qualitative autoradiography the radioactive molecules were detected in the lumen of the hair follicles until the infundibulum, around the superficial parts of the hair follicles and into a depth of the dermis of 200 to 500 microm. Activity could not be found in deeper parts of the hair follicles, the dermis or in the sebaceous glands. Penetration of ASM 981 is low in canine skin and is only equally spread in the upper third of the dermis 24 hours after application. Penetration in frozen skin takes even longer than in living canine skin but shows the same distribution.

2. National scientific conference on process engineering in environment protection. Conference materials

International Nuclear Information System (INIS)

1994-01-01

The national conference on 'Process engineering in environment protection' Jachranka 1994 has been divided into three sessions. Section 1 has been devoted to flue gas purification and collects 13 papers. Section 2 on liquid purification gathered 8 presentation. Section 3 - the poster session with 12 posters on related topics. During the conference 2 lectures and 3 posters have been devoted to the application of nuclear techniques to the solution different problems connected with environment protection

ASME factory authorization system and the situation in Japan

International Nuclear Information System (INIS)

Futagawa, Kiyoshi

1978-01-01

Since about three or four years ago, the enterprises of machinery, iron and steel and welding materials in Japan are paying much attention to the acquisition of ASME (American Society of Mechanical Engineers) certificates or authorization to stamp the code symbols. That is, over 70 factories in Japan have undergone ASME examination, and consequently acquired the authorization or certificates. Such authorization is divided into over 20 kinds, of which about 7 are possessed by the companies in Japan. In nuclear field, the kinds of authorization are N (nuclear vessel), NPT (nuclear vessel parts), NV (nuclear vessel safety valve), and MM (material manufacturing). In non-nuclear fields, they are S (power boilers), U (pressure vessels, in Div. 1), and U2 (pressure vessels in Div. 2). The following matters are described: ASME setup, authorization procedures of ASME for factories, the kinds of authorization, factories in Japan holding the authorization or certificates, and renewal of the authorization. (Mori, K.)

Computational Biology Support: RECOMB Conference Series (Conference Support)

Energy Technology Data Exchange (ETDEWEB)

Michael Waterman

2006-06-15

This funding was support for student and postdoctoral attendance at the Annual Recomb Conference from 2001 to 2005. The RECOMB Conference series was founded in 1997 to provide a scientific forum for theoretical advances in computational biology and their applications in molecular biology and medicine. The conference series aims at attracting research contributions in all areas of computational molecular biology. Typical, but not exclusive, the topics of interest are: Genomics, Molecular sequence analysis, Recognition of genes and regulatory elements, Molecular evolution, Protein structure, Structural genomics, Gene Expression, Gene Networks, Drug Design, Combinatorial libraries, Computational proteomics, and Structural and functional genomics. The origins of the conference came from the mathematical and computational side of the field, and there remains to be a certain focus on computational advances. However, the effective use of computational techniques to biological innovation is also an important aspect of the conference. The conference had a growing number of attendees, topping 300 in recent years and often exceeding 500. The conference program includes between 30 and 40 contributed papers, that are selected by a international program committee with around 30 experts during a rigorous review process rivaling the editorial procedure for top-rate scientific journals. In previous years papers selection has been made from up to 130--200 submissions from well over a dozen countries. 10-page extended abstracts of the contributed papers are collected in a volume published by ACM Press and Springer, and are available at the conference. Full versions of a selection of the papers are published annually in a special issue of the Journal of Computational Biology devoted to the RECOMB Conference. A further point in the program is a lively poster session. From 120-300 posters have been presented each year at RECOMB 2000. One of the highlights of each RECOMB conference is a

Crisis or Conference! Master List for Conference Planners.

Science.gov (United States)

Carey, Tony

This conference organizer's guide contains 42 lists of ideas, reminders, things to check, and questions to ask when a person is planning an event such as a conference, workshop, or training session. Written from a British point of view, the guide is organized into four parts in chronological order: preplanning, planning, onsite, and…

Statistical analysis of the ASME KIc database

International Nuclear Information System (INIS)

Sokolov, M.A.

1998-01-01

The American Society of Mechanical Engineers (ASME) K Ic curve is a function of test temperature (T) normalized to a reference nil-ductility temperature, RT NDT , namely, T-RT NDT . It was constructed as the lower boundary to the available K Ic database. Being a lower bound to the unique but limited database, the ASME K Ic curve concept does not discuss probability matters. However, a continuing evolution of fracture mechanics advances has led to employment of the Weibull distribution function to model the scatter of fracture toughness values in the transition range. The Weibull statistic/master curve approach was applied to analyze the current ASME K Ic database. It is shown that the Weibull distribution function models the scatter in K Ic data from different materials very well, while the temperature dependence is described by the master curve. Probabilistic-based tolerance-bound curves are suggested to describe lower-bound K Ic values

The 43rd JAIF annual conference

International Nuclear Information System (INIS)

2010-01-01

This CD-ROM includes the abstracts of JAIF annual conference held on April 20-22, 2010. Main theme was 'Major Pillar of Energy Supply and Global Warming Measures: Considering the Future of Nuclear Energy'. The conference consisted of three sessions. Each theme of these sessions are as follows; Session 1: 'How should nuclear power be positioned as a trump card for addressing climate change in political and social milieu?', Session 2: 'National perspectives on nuclear and energy policies toward the realization of their Nuclear Renaissance', Session 3: 'Here in Shimane, we think about the forty years back and future of the local community with nuclear power plants'. (J.P.N.)

Proceedings of the 9. international conference on health effects of incorporated radionuclides emphasis on radium, thorium, uranium and their daughter products - HEIR 2004

Energy Technology Data Exchange (ETDEWEB)

Oeh, U.; Roth, P.; Paretzke, H.G. (eds.) [GSF - Forschungszentrum fuer Umwelt und Gesundheit GmbH, Neuherberg (Germany)

2005-07-01

The ninth international conference on 'Health Effects of Incorporated Radionuclides - Emphasis on Radium, Thorium, Uranium and their Daughter Products' HEIR 2004 was held at GSF-National Research Center for Environment and Health, Neuherberg, Germany, from November 29 until December 1, 2004. The growing popularity of this topic among the scientific community, especially the radiation protection community, was demonstrated by the largest number of participants in comparison to the earlier conferences. In all, there were 157 participants from 20 different countries of the world. In the conference 62 scientific and 12 poster presentations were included in 13 sessions. The scope of the conference covered studies related to the long-term follow-up of thorotrast subjects in Japan, Germany and Portugal, and also of the subjects exposed to Ra-224 for the treatment of bone tuberculosis and ankylosing spondylitis. The studies and discussions on these topics are important in view of the large number of liver cancers observed in the thorotrast patients and the number of bone cancers in the cases treated with Ra-224. A growth stunting was also observed for the subjects who received the Ra-224 injections early in their lives. Besides atom bomb survivors, the data from thorotrast patients could well help towards a better understanding of the health effects of irradiations. In addition to the scientific presentations on the above topics, there were a number of presentations on the incidence of lung cancer from radon exposure of miners and plutonium exposures causing lung cancer among the Mayak workers in the Russian Federation. Other stimulating presentations were on the tissue damaging mechanisms of alpha particles, having very high L.E.T., and also the related radiation weighting factor in comparison to beta and gamma radiations. There were also interesting presentations on the topics of uncertainties involved in the internal dose assessment from radiation exposure and

Proceedings of the 9. international conference on health effects of incorporated radionuclides emphasis on radium, thorium, uranium and their daughter products - HEIR 2004

International Nuclear Information System (INIS)

Oeh, U.; Roth, P.; Paretzke, H.G.

2005-01-01

The ninth international conference on 'Health Effects of Incorporated Radionuclides - Emphasis on Radium, Thorium, Uranium and their Daughter Products' HEIR 2004 was held at GSF-National Research Center for Environment and Health, Neuherberg, Germany, from November 29 until December 1, 2004. The growing popularity of this topic among the scientific community, especially the radiation protection community, was demonstrated by the largest number of participants in comparison to the earlier conferences. In all, there were 157 participants from 20 different countries of the world. In the conference 62 scientific and 12 poster presentations were included in 13 sessions. The scope of the conference covered studies related to the long-term follow-up of thorotrast subjects in Japan, Germany and Portugal, and also of the subjects exposed to Ra-224 for the treatment of bone tuberculosis and ankylosing spondylitis. The studies and discussions on these topics are important in view of the large number of liver cancers observed in the thorotrast patients and the number of bone cancers in the cases treated with Ra-224. A growth stunting was also observed for the subjects who received the Ra-224 injections early in their lives. Besides atom bomb survivors, the data from thorotrast patients could well help towards a better understanding of the health effects of irradiations. In addition to the scientific presentations on the above topics, there were a number of presentations on the incidence of lung cancer from radon exposure of miners and plutonium exposures causing lung cancer among the Mayak workers in the Russian Federation. Other stimulating presentations were on the tissue damaging mechanisms of alpha particles, having very high L.E.T., and also the related radiation weighting factor in comparison to beta and gamma radiations. There were also interesting presentations on the topics of uncertainties involved in the internal dose assessment from radiation exposure and the

Proceedings of the 9. international conference on health effects of incorporated radionuclides emphasis on radium, thorium, uranium and their daughter products - HEIR 2004

Energy Technology Data Exchange (ETDEWEB)

Oeh, U; Roth, P; Paretzke, H G [GSF - Forschungszentrum fuer Umwelt und Gesundheit GmbH, Neuherberg (Germany)

2005-07-01

The ninth international conference on 'Health Effects of Incorporated Radionuclides - Emphasis on Radium, Thorium, Uranium and their Daughter Products' HEIR 2004 was held at GSF-National Research Center for Environment and Health, Neuherberg, Germany, from November 29 until December 1, 2004. The growing popularity of this topic among the scientific community, especially the radiation protection community, was demonstrated by the largest number of participants in comparison to the earlier conferences. In all, there were 157 participants from 20 different countries of the world. In the conference 62 scientific and 12 poster presentations were included in 13 sessions. The scope of the conference covered studies related to the long-term follow-up of thorotrast subjects in Japan, Germany and Portugal, and also of the subjects exposed to Ra-224 for the treatment of bone tuberculosis and ankylosing spondylitis. The studies and discussions on these topics are important in view of the large number of liver cancers observed in the thorotrast patients and the number of bone cancers in the cases treated with Ra-224. A growth stunting was also observed for the subjects who received the Ra-224 injections early in their lives. Besides atom bomb survivors, the data from thorotrast patients could well help towards a better understanding of the health effects of irradiations. In addition to the scientific presentations on the above topics, there were a number of presentations on the incidence of lung cancer from radon exposure of miners and plutonium exposures causing lung cancer among the Mayak workers in the Russian Federation. Other stimulating presentations were on the tissue damaging mechanisms of alpha particles, having very high L.E.T., and also the related radiation weighting factor in comparison to beta and gamma radiations. There were also interesting presentations on the topics of uncertainties involved in the internal dose assessment from radiation exposure and the

Does the Early Adopter of Drugs Exist? A Population Based Study of General Practitioners’ Prescribing of New Drugs.20 th International Conference on Pharmacoepiemiology and Risk Management. Bordeaux, France. Pharmacoepidemiology and Drug Safety, 2004;13:Sl 1:158

DEFF Research Database (Denmark)

Dybdahl, Torben; Andersen, Morten; Søndergaard, Jens

2004-01-01

20 th International Conference on Pharmacoepiemiology and Risk Management. Bordeaux, France. Pharmacoepidemiology and Drug Safety, 2004;13:Sl 1:158......20 th International Conference on Pharmacoepiemiology and Risk Management. Bordeaux, France. Pharmacoepidemiology and Drug Safety, 2004;13:Sl 1:158...

International Nuclear Physics Conference

CERN Document Server

2016-01-01

We are pleased to announce that the 26th International Nuclear Physics Conference (INPC2016) will take place in Adelaide (Australia) from September 11-16, 2016. The 25th INPC was held in Firenze in 2013 and the 24th INPC in Vancouver, Canada, in 2010. The Conference is organized by the Centre for the Subatomic Structure of Matter at the University of Adelaide, together with the Australian National University and ANSTO. It is also sponsored by the International Union of Pure and Applied Physics (IUPAP) and by a number of organisations, including AUSHEP, BNL, CoEPP, GSI and JLab. INPC 2016 will be held in the heart of Adelaide at the Convention Centre on the banks of the River Torrens. It will consist of 5 days of conference presentations, with plenary sessions in the mornings, up to ten parallel sessions in the afternoons, poster sessions and a public lecture. The Conference will officially start in the evening of Sunday 11th September with Registration and a Reception and will end late on the afternoon of Fri...

ASME nuclear codes and standards: Scope of coverage and current initiatives

International Nuclear Information System (INIS)

Eisenberg, G. M.

1995-01-01

The objective of this paper is to address the broad scope of coverage of nuclear codes, standards and guides produced and administered by the American Society of Mechanical Engineers (ASME). Background information is provided regarding the evolution of the present activities. Details are provided on current initiatives intended to permit ASME to meet the needs of a changing nuclear industry on a worldwide scale. During the early years of commercial nuclear power, ASME produced a code for the construction of nuclear vessels used in the reactor coolant pressure boundary, containment and auxiliary systems. In response to industry growth, ASME Code coverage soon broadened to include rules for construction of other nuclear components, and inservice inspection of nuclear reactor coolant systems. In the years following this, the scope of ASME nuclear codes, standards and guides has been broadened significantly to include air cleaning activities for nuclear power reactors, operation and maintenance of nuclear power plants, quality assurance programs, cranes for nuclear facilities, qualification of mechanical equipment, and concrete reactor vessels and containments. ASME focuses on globalization of its codes, standards and guides by encouraging and promoting their use in the international community and by actively seeking participation of international members on its technical and supervisory committees and in accreditation activities. Details are provided on current international representation. Initiatives are underway to separate the technical requirements from administrative and enforcement requirements, to convert to hard metric units, to provide for non-U. S. materials, and to provide for translations into non-English languages. ASME activity as an accredited ISO 9000 registrar for suppliers of mechanical equipment is described. Rules are being developed for construction of containment systems for nuclear spent fuel and high-level waste transport packagings. Intensive

Highlights of proposed changes to ANSI/ASME N509-80

International Nuclear Information System (INIS)

Ornberg, S.C.

1987-01-01

The ASME Committee on Nuclear Air and Gas Treatment (CONAGT) are at the time of this writing considering performing maintenance revisions of ANSI N509 and N510 based on the results of a required 5-year review and comments received from users of the standards at workshops and through inquiries. This paper discusses the highlights of the significant revisions to ANSI/ASME N509 and explains the reasons for the changes. It should be emphasized that these revisions are not yet approved by ASME CONAGT, the board of Nuclear Codes and Standards, or ANSI

Proceedings of the First Environmental Physics Conference (EPC-2004)

International Nuclear Information System (INIS)

2005-01-01

The publication has been set up as proceedings of the environmental physics conference. the conference consistes of environmental monitoring, the Eco system, natural radioactivity, hazards and risks, activity reviews, environmental mangement. this conference consistes of 252p., figs., tabs., refrs

Proceedings of the First Environmental Physics Conference (EPC-2004)

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The publication has been set up as proceedings of the environmental physics conference. the conference consistes of environmental monitoring, the Eco system, natural radioactivity, hazards and risks, activity reviews, environmental mangement. this conference consistes of 252p., figs., tabs., refrs.

Proceedings of the sixth annual conference on fossil energy materials

Energy Technology Data Exchange (ETDEWEB)

Cole, N.C.; Judkins, R.R. (comps.)

1992-07-01

The Sixth Annual Conference on Fossil Energy Materials was held in Oak Ridge, Tennessee, on May 12--14, 1992. The meeting was sponsored by the US Department of Energy's Office of Fossil Energy through the Advanced Research and Technology Development (AR TD) Materials Program, and ASM International. The objective of the AR TD Materials Program is to conduct research and development on materials for longer-term fossil energy applications as well as for generic needs of various fossil fuel technologies. The management of the Program has been decentralized to the DOE Field Office, Oak Ridge with Oak Ridge National Laboratory (ORNL) as the technical support contractor. The research is performed by staff members at ORNL and by a substantial number of researchers at other national laboratories, universities, and in private industry. The work is divided into the following categories: (1) ceramics, (2) development and corrosion resistance of iron aluminide, advanced austenitic and chromium-niobium alloys, and (3) technology assessment and technology transfer. This conference is held each year to review the work on all of the projects of the Program. The agenda for the meeting is given in Appendix A, and a list of attendees is presented in Appendix B. ASM International cosponsored the conference, for which we are especially grateful.

Veterans in Society Conference 2014: Humanizing the Discourse (Conference Program)

OpenAIRE

Virginia Tech. Department of English. Center for the Study of Rhetoric in Society; Virginia Tech. Veterans Studies Group

2014-01-01

This program lists the daily sessions, presentations, and events that took place during the 2014 Veterans in Society Conference, which was held from April 27-28, 2014 at the Hotel Roanoke in Roanoke, VA. This program also includes speaker and presenter bios, descriptions of unrecorded conference events, and a letter from conference co-chair Jim Dubinsky, the director of Virginia Tech's Center for the Study of Rhetoric in Society. The 2014 Veterans in Society Conference: Humanizing the Discour...

NSSS vendors session

International Nuclear Information System (INIS)

Anon.

1982-01-01

A transcription of a question and answer session at the 1982 Nuclear Commerce Conference was presented. Standardization of nuclear power plant design, and the effects it would have on Nuclear Regulatory Commission licensing and regulations, was of particular interest. Forecasts of the demand for nuclear power for the rest of this country were also discussed

CD3 TRIGA users conference

International Nuclear Information System (INIS)

2008-01-01

The Sixteenth European TRIGA Users Conference was held in Pitesti, Romania, on 25-28 September, 2000, under the sponsorship of the Institute for Nuclear Research at Pitesti. The papers which follow in this document are presented in the same order as listed in the Conference Program. All papers which were received for publication (44) have been included. Those papers which were presented but not received for publication are presented in abstract form (4 papers). It was very interesting for the Conference attendees from the West to learn about the large scope of excellent work conducted in Romania, especially at the Institute of Nuclear Research in Pitesti. Similarly, it was fortunate that a large attendance of Romanian researchers (53) from many institutes, universities, and government agencies could attend the Conference and interact with their counterparts from outside Romania. The European TRIGA9 Owners' Group was fortunate to be hosted by the owners and users of the world's largest TRIGA reactor - the 14-MW Romanian research and test reactor. The Opening Session talk was given by Radu Berceanu, Minister of Industries and Commerce. It was followed by the following presentations: R and D - Support for Nuclear Power Development by Ioan Rotaru (General Manager of SNNE); Overview of TRIGA Reactor and other Programs at GENERAL ATOMICS by Junaid Razvi (General Manager TRIGA Reactor at GA); Development strategies connected to National Power and Energy Program by Mircea Ionescu (Director Nuclear Energy Department of M.I.C.); Contribution of INR R and D Programs to Sustain Peaceful and Safe utilization of Nuclear Energy in Romania by Constantin Gheorghiu (Scientific Deputy Director at SCN). A Technical visit to TRIGA Reactor at INR Pitesti took place. Opening Session was followed by five sessions dedicated to the following subjects: Session 1 (8 papers) - TRIGA reactors operation, repair and maintenance; Session 2 (10 papers) - Future developments and future goals of

Statement to the 46th regular session of the IAEA General Conference 2002. Vienna, 16 September 2002

Energy Technology Data Exchange (ETDEWEB)

ElBaradei, M [International Atomic Energy Agency, Vienna (Austria)

2002-09-16

In his Statement to the forty-six regular session of the General Conference of the IAEA, the Director General of the Agency highlighted some of the IAEA's activities and challenges in the fields of: nuclear operation and construction; radioactive waste management; nuclear applications; radiotherapy; sterile insect technique; water resources management; international co-operation and conventions; establishment of global safety standards; radiation protection; management of nuclear knowledge; safeguards; implementation of United Nations Security Council resolutions relating to Iraq; convention on the physical protection of nuclear material. He also discussed the Agency's technical co-operation programme and the Agency management.

Statement to the 46th regular session of the IAEA General Conference 2002. Vienna, 16 September 2002

International Nuclear Information System (INIS)

ElBaradei, M.

2002-01-01

In his Statement to the forty-six regular session of the General Conference of the IAEA, the Director General of the Agency highlighted some of the IAEA's activities and challenges in the fields of: nuclear operation and construction; radioactive waste management; nuclear applications; radiotherapy; sterile insect technique; water resources management; international co-operation and conventions; establishment of global safety standards; radiation protection; management of nuclear knowledge; safeguards; implementation of United Nations Security Council resolutions relating to Iraq; convention on the physical protection of nuclear material. He also discussed the Agency's technical co-operation programme and the Agency management

ITER at the international conference on fusion reactor materials

International Nuclear Information System (INIS)

Kalinin, G.; Barabash, V.; Matera, R.

1998-01-01

The reports summarizes the topics of the eighth International Conference on Fusion Reactor Materials (ICFRM-8) which was held in Sendai, Japan, on 26-31 October 1997. The ICFRM is focused on the whole spectrum of materials and technologies to be applied in fusion reactors and related facilities. The total number of conference participants was over 500, representing 24 countries and about 600 oral and poster papers were presented at the conference. Three sessions were devoted to ITER materials: (i) Design-Materials Interface and ITER (oral session); (ii) ITER, Irradiation Facility and Technology, (poster session); (iii) ITER and Beyond (discussion session)

Equilíbrio corporal em crianças e adolescentes asmáticos e não asmáticos

Directory of Open Access Journals (Sweden)

Marta Cristina Rodrigues da Silva

2013-06-01

Full Text Available O objetivo foi analisar e comparar o equilíbrio corporal em crianças e adolescentes asmáticos e não asmáticos. Fizeram parte do grupo de estudos 24 sujeitos com idades de 7 a 14 anos divididos em dois grupos: grupo asmático e grupo controle. Para avaliação do equilíbrio corporal utilizou-se uma plataforma de força. Foram utilizadas as condições, olhos abertos e fechados com três tentativas aleatórias, com duração de 30 segundos cada uma. Os resultados apontaram diferença significativa entre os grupos, no teste de equilíbrio com olhos abertos apresentando maior amplitude de deslocamento na direção ântero-posterior (COPap (p = 0,04, e médio lateral (COPml (p = 0,02 no grupo asmático. Enquanto que no teste com olhos fechados a diferença foi significante apenas na amplitude de deslocamento ântero-posterior (COPap (p = 0,02 e Área de Elipse (p=0,03. Desse modo, a asma com suas limitações e consequências parece influenciar negativamente no equilíbrio corporal de seus portadores quando comparados com crianças sem a patologia e da mesma faixa etária.

International Conference on Recent Developments and Applications of Nuclear Technologies - Conference Abstracts

International Nuclear Information System (INIS)

Zakrzewska-Trznadel, G.

2008-01-01

The aim of the Conference was to offer an opportunity to interchange views and experiences, as well as to present the state of the art and modern trends concerning research and applications in the field of nuclear technologies. It was hoped that the Conference may fill up the gap on the field of information about possibilities and results of the application of nuclear technologies in modern economy of the 21 century, particularly in: industry, food processing, heritage preservation, environmental protection, homeland security and health protection. One session, with invited lectures, was entirely devoted to modern nuclear technologies for power generation. Conference participants presented 7 plenary lectures, 68 oral communications in 8 sessions and 98 posters

SDZ ASM 981: an emerging safe and effective treatment for atopic dermatitis.

Science.gov (United States)

Luger, T; Van Leent, E J; Graeber, M; Hedgecock, S; Thurston, M; Kandra, A; Berth-Jones, J; Bjerke, J; Christophers, E; Knop, J; Knulst, A C; Morren, M; Morris, A; Reitamo, S; Roed-Petersen, J; Schoepf, E; Thestrup-Pedersen, K; Van Der Valk, P G; Bos, J D

2001-04-01

SDZ ASM 981 is a selective inhibitor of the production of pro-inflammatory cytokines from T cells and mast cells in vitro. It is the first ascomycin macrolactam derivative under development for the treatment of inflammatory skin diseases. This study was designed to determine the safety and efficacy of SDZ ASM 981 cream at concentrations of 0.05%, 0.2%, 0.6% and 1.0% in the treatment of patients with atopic dermatitis and to select the concentration to be used in phase III studies. This was a double-blind, randomized, parallel-group, multicentre dose-finding study. A total of 260 patients were randomly assigned to treatment with SDZ ASM 981 cream at concentrations of 0.05%, 0.2%, 0.6%, or 1.0%, matching vehicle cream, or the internal control 0.1% betamethasone-17-valerate cream (BMV). Treatment was given twice daily for up to 3 weeks. A clear dose-response relationship for SDZ ASM 981 was evident, with 0.2%, 0.6% and 1.0% SDZ ASM 981 creams all being significantly more effective than vehicle (P = 0.041, 0.001 and 0.008, respectively) in terms of baseline to end-point changes in the Eczema Area Severity Index (EASI) and pruritus score. The 1.0% cream was the most effective SDZ ASM 981 concentration. BMV was more effective than the SDZ ASM 981 creams tested in this study. It appears that the efficacy plateau was not reached with the SDZ ASM 981 creams within 3 weeks treatment. SDZ ASM 981 was well tolerated. Burning or a feeling of warmth were the only adverse events reported more frequently in the 0.6% and 1.0% SDZ ASM 981 treatment groups than in the vehicle treatment group (42.9%, 48.9% and 34.9%, respectively). Few systemic adverse events were reported during the study (headache was the most frequent systemic event reported by 15 of 252 patients) and none was considered to be related to treatment. The local tolerability profile of the 1.0% cream was similar to that of the lower concentrations. 1.0% SDZ ASM 981 cream, which was shown to be safe, well tolerated and

International Conference on Physics and Technology of Reactors and Applications

International Nuclear Information System (INIS)

2011-01-01

Full text : The international conference on physics and technology of reactors is organized by the Moroccan Association for Nuclear enggineering and Reactor Technology (GMTR) with the collaboration of the Centre for Energy and Nuclear Sciences and Techniques (CNESTEN) and under the auspices of the ministry of Energy, Mining, Water and Environment. The programme of the PHYTRA2 conference covers a wide variety of topics. The conference is organised in one plenary session, eight oral technical sessions and one poster session. The oral and poster technical sessions covers the usual topics of nuclear engineering including one session on research reactors utilisation and computational methods for research reactors

Contemporary Elementary and Middle School Physical Education Conference (Georgia State University, Atlanta, Georgia, January 15-17, 1981). Proceedings, Saturday, Activity and Position Paper Sessions.

Science.gov (United States)

Jones, Margaret A., Ed.

At the final session of the January conference on Contemporary Elementary and Middle School Physical Education, 40 discussions and workshops centered on physical fitness, health, safety, and adapting athletics for the disabled child. Other topics covered were creative dance, water activities, lifetime sports, and teacher resource materials and…

Adaptive and active materials: selected papers from the ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 13) (Snowbird, UT, USA, 16-18 September 2013)

Science.gov (United States)

Johnson, Nancy; Naguib, Hani; Turner, Travis; Anderson, Iain; Bassiri-Gharb, Nazanin; Daqaq, Mohammed; Baba Sundaresan, Vishnu; Sarles, Andy

2014-10-01

The sixth annual meeting of the ASME Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) was held in the beautiful mountain encircled Snowbird Resort and Conference Center in Little Cottonwood Canyon near Salt Lake City, Utah. It is the conference's objective to provide an up-to-date overview of research trends in the entire field of smart materials systems in a friendly casual forum conducive to the exchange of ideas and latest results. As each year we strive to grow and offer new experiences, this year we included special focused topic tracks on nanoscale multiferroic materials and origami engineering. The cross-disciplinary emphasis was reflected in keynote speeches by Professor Kaushik Bhattacharya (California Institute of Technology) on 'Cyclic Deformation and the Interplay between Phase Transformation and Plasticity in Shape Memory Alloys', by Professor Alison Flatau (University of Maryland at College Park) on 'Structural Magnetostrictive Alloys: The Other Smart Material', and by Dr Leslie Momoda (Director of the Sensors and Materials Laboratories, HRL Laboratories, LLC, Malibu, CA) on 'Architecturing New Functional Materials: An Industrial Perspective'. SMASIS 2013 was divided into seven symposia which span basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations. SYMP 1. Development and Characterization of Multifunctional Materials. SYMP 2. Mechanics and Behavior of Active Materials. SYMP 3. Modeling, Simulation and Control of Adaptive Systems. SYMP 4. Integrated System Design and Implementation. SYMP 5. Structural Health Monitoring. SYMP 6. Bioinspired Smart Materials and Systems. SYMP 7. Energy Harvesting. Authors of selected papers in the materials areas (symposia 1, 2, and 6) as well as energy harvesting (symposium 7) were invited to write a full journal article on their presentation topic for publication in this special issue of Smart

Consideration of the Construction Code for TBM-body in ASME BPVC

International Nuclear Information System (INIS)

Kim, Dongjun; Kim, Yunjae; Kim, Suk Kwon; Park, Sung Dae; Lee, Dong Won

2016-01-01

In this paper, ASME code is briefly introduced, and the TBM-body is classified for selecting the ASME section. With the classification of TBM-body, the appropriate section is determined. Helium Cooled Ceramic Reflector (HCCR) Test Blanket System (TBS) has been designed to research on the functions of breeding blanket by KO TBM team. The functions has three subjects as 1) Tritium breeding, 2) Heat conversion and extraction, and 3) Neutron and Gamma-ray shielding. For the process of design, it is needed to select the appropriate construction code as the design criteria. ITER Organization (IO) has proposed that RCC-MR Edition 2007 ver. shall be used for TBM-shield. Because the TBM-shield is connected to the vacuum boundary. For the other part of TBM-set, TBM-body, there is no constraint on the selected code, and the manufacturer can appropriately select the construction code to apply design and fabrication parts. KO TBM Team has considered whether it is appropriate to choose any code for TBM-body. One of the things is ASME code. The advantage of ASME choice is suitable to the domestic status. In the domestic nuclear plant, ASME or KEPIC code is used as regulatory requirements. Based on this, it is possible to prepare a domestic fusion plant regulatory. In this paper, the construction code of TBM-body was determined in ASME BPVC. For the determination of code, the structure of ASME BPVC was introduced and the classification for TBM-body was conducted by the ITER criteria. And the operation conditions of TBM-body that contained creep and irradiation effects was considered to determine the construction code

Consideration of the Construction Code for TBM-body in ASME BPVC

Energy Technology Data Exchange (ETDEWEB)

Kim, Dongjun; Kim, Yunjae [Korea Univ., Seoul (Korea, Republic of); Kim, Suk Kwon; Park, Sung Dae; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this paper, ASME code is briefly introduced, and the TBM-body is classified for selecting the ASME section. With the classification of TBM-body, the appropriate section is determined. Helium Cooled Ceramic Reflector (HCCR) Test Blanket System (TBS) has been designed to research on the functions of breeding blanket by KO TBM team. The functions has three subjects as 1) Tritium breeding, 2) Heat conversion and extraction, and 3) Neutron and Gamma-ray shielding. For the process of design, it is needed to select the appropriate construction code as the design criteria. ITER Organization (IO) has proposed that RCC-MR Edition 2007 ver. shall be used for TBM-shield. Because the TBM-shield is connected to the vacuum boundary. For the other part of TBM-set, TBM-body, there is no constraint on the selected code, and the manufacturer can appropriately select the construction code to apply design and fabrication parts. KO TBM Team has considered whether it is appropriate to choose any code for TBM-body. One of the things is ASME code. The advantage of ASME choice is suitable to the domestic status. In the domestic nuclear plant, ASME or KEPIC code is used as regulatory requirements. Based on this, it is possible to prepare a domestic fusion plant regulatory. In this paper, the construction code of TBM-body was determined in ASME BPVC. For the determination of code, the structure of ASME BPVC was introduced and the classification for TBM-body was conducted by the ITER criteria. And the operation conditions of TBM-body that contained creep and irradiation effects was considered to determine the construction code.

Assessment of ASME code examinations on regenerative, letdown and residual heat removal heat exchangers

International Nuclear Information System (INIS)

Gosselin, Stephen R.; Cumblidge, Stephen E.; Anderson, Michael T.; Simonen, Fredric A.; Tinsley, G A.; Lydell, B.; Doctor, Steven R.

2005-01-01

Inservice inspection requirements for pressure retaining welds in the regenerative, letdown, and residual heat removal heat exchangers are prescribed in Section XI Articles IWB and IWC of the ASME Boiler and Pressure Vessel Code. Accordingly, volumetric and/or surface examinations are performed on heat exchanger shell, head, nozzle-to-head, and nozzle-to-shell welds. Inspection difficulties associated with the implementation of these Code-required examinations have forced operating nuclear power plants to seek relief from the U.S. Nuclear Regulatory Commission. The nature of these relief requests are generally concerned with metallurgical, geometry, accessibility, and radiation burden. Over 60% of licensee requests to the NRC identify significant radiation exposure burden as the principle reason for relief from the ASME Code examinations on regenerative heat exchangers. For the residual heat removal heat exchangers, 90% of the relief requests are associated with geometry and accessibility concerns. Pacific Northwest National Laboratory was funded by the NRC Office of Nuclear Regulatory Research to review current practice with regard to volumetric and/or surface examinations of shell welds of letdown heat exchangers regenerative heat exchangers and residual (decay) heat removal heat exchangers Design, operating, common preventative maintenance practices, and potential degradation mechanisms are reviewed. A detailed survey of domestic and international PWR-specific operating experience was performed to identify pressure boundary failures (or lack of failures) in each heat exchanger type and NSSS design. The service data survey was based on the PIPExp- database and covers PWR plants worldwide for the period 1970-2004. Finally a risk assessment of the current ASME Code inspection requirements for residual heat removal, letdown, and regenerative heat exchangers is performed. The results are then reviewed to discuss the examinations relative to plant safety and

2015 Special Sessions of the 13th International Conference on Practical Applications of Agents and Multi-Agent Systems

CERN Document Server

Hernández, Josefa; Mathieu, Philippe; Campbell, Andrew; Fernández-Caballero, Antonio; Moreno, María; Julián, Vicente; Alonso-Betanzos, Amparo; Jiménez-López, María; Botti, Vicente; Trends in Practical Applications of Agents, Multi-Agent Systems and Sustainability : the PAAMS Collection

2015-01-01

This volume presents the papers that have been accepted for the 2015 special sessions of the 13th International Conference on Practical Applications of Agents and Multi-Agent Systems, held at University of Salamanca, Spain, at 3rd-5th June, 2015: Agents Behaviours and Artificial Markets (ABAM); Agents and Mobile Devices (AM); Multi-Agent Systems and Ambient Intelligence (MASMAI); Web Mining and Recommender systems (WebMiRes); Learning, Agents and Formal Languages (LAFLang); Agent-based Modeling of Sustainable Behavior and Green Economies (AMSBGE); Emotional Software Agents (SSESA) and Intelligent Educational Systems (SSIES). The volume also includes the paper accepted for the Doctoral Consortium in PAAMS 2015. PAAMS, the International Conference on Practical Applications of Agents and Multi-Agent Systems is an evolution of the International Workshop on Practical Applications of Agents and Multi-Agent Systems. PAAMS is an international yearly tribune to present, to discuss, and to disseminate the latest develo...

ASME nuclear codes and standards: Recent technical initiatives

International Nuclear Information System (INIS)

Feigel, R. E.

1995-01-01

Although nuclear power construction is currently in a hiatus in the US, ASME and its volunteer committees remain committed to continual improvements in the technical requirements in its nuclear codes. This paper provides an overview of several significant recent revisions to ASME' s nuclear codes. Additionally, other important initiatives currently being addressed by ASME committees will be described. With the largest population of operating light water nuclear plants in the world and worldwide use of its nuclear codes, ASME continues to support technical advancements in its nuclear codes and standards. While revisions of various magnitude are an ongoing process, several recent revisions embody significant changes based on state of the art design philosophy and substantial industry experience. In the design area, a significant revisions has recently been approved which will significantly reduce conservatisms in seismic piping design as well as provide simplified design rules. Major revisions have also been made to the requirements for nuclear material manufacturers and suppliers, which should result in clearer understanding of this difficult administrative area of the code. In the area of Section XI inservice rules, substantial studies are underway to investigate the application of probabilistic, risked based inspection in lieu of the current deterministic inspection philosophy. While much work still is required in this area, it is an important potential application of the emerging field of risk based inspection

The 35th JAIF annual conference

International Nuclear Information System (INIS)

2003-01-01

The JAIF (Japan Atomic Industrial Forum, INC) conference was opened at Oomiya Sonic City- Sonic City Hole, Saitama, Japan from April 22 to 24, 2002. Main theme was nuclear power in the changing socio-political environment-challenges for the future. The conference consisted of six parts such as opening session, session 1: energy policy of the 21st century and nuclear power, session 2: tasks for metropolitan areas and regions with nuclear facilities, session 3: why plutonium recycling? , session 4: contribution of nuclear power under the new socio-economic environment and session 5: to shape the future of nuclear power: development of advanced and innovative reactors. Session 2 to 4 was panel discussion. The other meeting for citizens and Youth Forum was hold and cinemas of nuclear power were shown. 14 speakers from many countries gave a lecture, 16 persons were panelers and 4 commentators. (S.Y.)

A report on the UN special session on disarmament

International Nuclear Information System (INIS)

1978-01-01

Slow progress in disarmament led many of the United Nations Member States, particularly the non-aligned countries, to request the convening of a Special Session of the General Assembly Devoted to Disarmament. The idea of such a special session had evolved over the past few years as an alternative to a World Disarmament Conference and in contrast to the limited possibilities for discussion provided by a regular session of the General Assembly. A special session was perceived as offering the appropriate opportunity to discuss comprehensive disarmament in a practically universal forum The decision to hold the special session was taken by the General Assembly on 21 December 1976 by resolution 31/189 B, which also established a Preparatory Committee to examine all questions relevant to the special session. Fifty-four countries were appointed members of the Preparatory Committee, which met in five sessions. The United Nations Special Session on Disarmament (SSOD) was held in New York from May 23 to June 30, 1978. One hundred and forty-five nations attended and this was the first time since the Disarmament Conference of 1932 that virtually all countries of the world met to discuss all aspects of disarmament. The agenda for the SSOD included inter alia: a review and appraisal of the present international situation, the adoption of a Declaration on Disarmament, the adoption of a Programme of Action on Disarmament, a review of the role of the UN in disarmament and of the international machinery for negotiations on disarmament, including, in particular, the question of convening a world disarmament conference. The various proposals made at the sessions of the Preparatory Committee and at the SSOD itself were consolidated into one document. Consensus on this Final Document was reached on June 30, the concluding day of the session. The Final Document consists of three major parts: Declaration of Principles, Programme of Action and Disarmament Machinery

2005 annual nuclear technology conference

International Nuclear Information System (INIS)

Anon.

2005-01-01

This year's Annual Nuclear Technology Conference of the Deutsches Atomforum and Kerntechnische Gesellschaft was held in Nuremberg on May 10-12, 2005. More than 1 100 participants from eighteen countries make this specialized event one of the largest international conventions in the field of the peaceful uses of nuclear power, whose attendance has steadily increased over the past few years. The first day of the conference was devoted to plenary lectures traditionally dealing mainly with political and economic problems of the use of nuclear power. The partner country of JK 2005 was Switzerland. Traditionally, the program of the three-day conference was organized in the proven format of plenary sessions on the first day, followed by technical sessions, specialized sessions, poster sessions, and special events on the following days. For the third time, the ''Nuclear Campus'' was organized which successfully made the world of nuclear technology transparent to high school and university students in lectures and an exhibition. The meeting was accompanied by a technical exhibition with meeting points of manufacturers, suppliers, and service industries. (orig.)

2011 GASEOUS IONS GORDON RESEARCH CONFERENCE

Energy Technology Data Exchange (ETDEWEB)

Scott Anderson

2011-03-04

The Gaseous Ions: Structures, Energetics and Reactions Gordon Research Conference will focus on ions and their interactions with molecules, surfaces, electrons, and light. The conference will cover theory and experiments, and systems ranging from molecular to biological to clusters to materials. The meeting goal continues to be bringing together scientists interested in fundamentals, with those applying fundamental phenomena to a wide range of practical problems. Each of the ten conference sessions will focus on a topic within this spectrum, and there will also be poster sessions for contributed papers, with sufficient space and time to allow all participants to present their latest results. To encourage active participation by young investigators, about ten of the poster abstracts will be selected for 15 minute 'hot topic' talks during the conference sessions. Hot topic selection will be done about a month before the meeting. Funds should be available to offset the participation cost for young investigators.

Statement to the 36th session of the General Conference of the International Atomic Energy Agency 21 September 1992; Statement to the 47th session of the United Nations General Assembly 21 October 1992

International Nuclear Information System (INIS)

Blix, H.

1993-01-01

IAEA Director General, Hans Blix, in his statements to the 47th session of the United Nations General Assembly and to the 36th session of the General Conference of the IAEA, reminded that 1992 marks the fiftieth anniversary of controlled nuclear fission and the thirty-fifth anniversary of the IAEA. He specially commented on the various measures taken during the past year to strengthen the IAEA's safeguards system as a part of the challenge to reduce the risk of a further spread of nuclear weapons. He also discussed the role of the IAEA in the fields of nuclear safety, nuclear waste, transfer of technology and assistance to developing countries and the financing and management of the Agency within the UN system

ASME Code Efforts Supporting HTGRs

Energy Technology Data Exchange (ETDEWEB)

D.K. Morton

2012-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

ASME Code Efforts Supporting HTGRs

Energy Technology Data Exchange (ETDEWEB)

D.K. Morton

2011-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

The 9. European nuclear conference

International Nuclear Information System (INIS)

Maurel, V.; Lewis, D.; Smirnov, V.P.; Gutierrez, J.E.; Paulin, Ph.; Markov, D.V.; Smirnov, A.V.; Polenok, V.S.; Horhoianu, G.; Olteanu, G.; Van der Schaaf, B.; Gavillet, D.; Lapena, J.; Ohms, C.; Roth, A.; Van Dyck, St.; Mardon, J.P.; Thomas, A.; Cipiere, M.F.; Faidy, C.; Hedin, F.; Delnondedieu, M.; Chassignole, B.; Doudet, L.; Dupond, O.; Kang, K.; Park, K.; Kim, K.; Ha, J.; Hoon-Seok, Jung; Yong-koo, Lee; Kwang-Ho, Kim; Seungwoo, Paek; Heui-Joo, Choi; Do-Hee, Ahn; Kwang-Rag, Kim; Minsoo, Lee; Sung-Paal, Yim; Hongsuk, Chung; Detroux, P.; Meessen, O.; Defloor, J.; Lars-Erik, Holm; Barescut, J.C.; Vacquier, B.; Laurier, D.; Caer, S.; Quesne, B.; Oudalova, A.; Geras'kin, St.; Dikarev, V.; Dikareva, N.; Chernonog, E.; Yang-Geun, Chung; Gab-Bock, Lee; Sun-Young, Bang; Yong-Sun, Lee; Bolognese-Milsztajn, T.; Frank, D.; Lacoste, V.; Pihet, P.; Lacronique, J.F.; Chauliac, C.; Verwaerde, D.; Pavageau, O.; Zaetta, A.; Varaine, F.; Warin, D.; Hudelot, J.P.; Bioux, Ph.; Klann, R.; Petruzzi, A.; D'auria, F.; Yung Kwon, Jin; Chul Jin, Chol; Mihalache, M.; Radu, V.; Pavelescu, M.; Schneidesch, Ch.R.; Jinzhao, Zhang; Dalleur, J.P.; Nuttin, A.; Meplan, O.; Wilson, J.; Perdu, F.; Campioni, G.; Mounier, C.; Sigrist, J.F.; Laine, Ch.; Broc, D.; Robbe, M.F.; Cariou, Y.; Seok-Kyun, Yoon; Win, Naing; Myung-Hyun, Kim; Kyung, Hee; Fridman, E.; Shwageraus, E.; Galperin, A.; Meplan, O.; Laulan, O.; Mechel-Sendis, F.; Belgaid, M.; Kadem, F.; Amokrane, A.; Hamidouche, T.; El-Khider, Si-Ahmed

2005-01-01

This issue gathers the abstracts of the papers presented at the ninth European nuclear conference (ENC-2005). The main part of the conference is split into 20 sessions. These sessions cover all technical aspects of nuclear power, from reactor design to waste management, without forgetting experimental and research reactors, reactor dismantling, economy, resources, safety, radioprotection and education issues. Perspectives of a nuclear renaissance are clearly visible in the world. This renaissance, mainly due to political, economical, societal and ecological factors, is fuelled by scientific and technical progress. This conference was the opportunity to present together these aspects of nuclear power and to analyze their mutual interactions

Analysis of the Current Technical Issues on ASME Code and Standard for Nuclear Mechanical Design(2009)

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Lee, B. S.; Yoo, S. H.

2009-11-01

This report describes the analysis on the current revision movement related to the mechanical design issues of the U.S ASME nuclear code and standard. ASME nuclear mechanical design in this report is composed of the nuclear material, primary system, secondary system and high temperature reactor. This report includes the countermeasures based on the ASME Code meeting for current issues of each major field. KAMC(ASME Mirror Committee) of this project is willing to reflect a standpoint of the domestic nuclear industry on ASME nuclear mechanical design and play a technical bridge role for the domestic nuclear industry in ASME Codes application

Analysis of the Current Technical Issues on ASME Code and Standard for Nuclear Mechanical Design(2009)

Energy Technology Data Exchange (ETDEWEB)

Koo, Gyeong Hoi; Lee, B. S.; Yoo, S. H.

2009-11-15

This report describes the analysis on the current revision movement related to the mechanical design issues of the U.S ASME nuclear code and standard. ASME nuclear mechanical design in this report is composed of the nuclear material, primary system, secondary system and high temperature reactor. This report includes the countermeasures based on the ASME Code meeting for current issues of each major field. KAMC(ASME Mirror Committee) of this project is willing to reflect a standpoint of the domestic nuclear industry on ASME nuclear mechanical design and play a technical bridge role for the domestic nuclear industry in ASME Codes application

GC-ASM: Synergistic Integration of Graph-Cut and Active Shape Model Strategies for Medical Image Segmentation.

Science.gov (United States)

Chen, Xinjian; Udupa, Jayaram K; Alavi, Abass; Torigian, Drew A

2013-05-01

Image segmentation methods may be classified into two categories: purely image based and model based. Each of these two classes has its own advantages and disadvantages. In this paper, we propose a novel synergistic combination of the image based graph-cut (GC) method with the model based ASM method to arrive at the GC-ASM method for medical image segmentation. A multi-object GC cost function is proposed which effectively integrates the ASM shape information into the GC framework. The proposed method consists of two phases: model building and segmentation. In the model building phase, the ASM model is built and the parameters of the GC are estimated. The segmentation phase consists of two main steps: initialization (recognition) and delineation. For initialization, an automatic method is proposed which estimates the pose (translation, orientation, and scale) of the model, and obtains a rough segmentation result which also provides the shape information for the GC method. For delineation, an iterative GC-ASM algorithm is proposed which performs finer delineation based on the initialization results. The proposed methods are implemented to operate on 2D images and evaluated on clinical chest CT, abdominal CT, and foot MRI data sets. The results show the following: (a) An overall delineation accuracy of TPVF > 96%, FPVF ASM for different objects, modalities, and body regions. (b) GC-ASM improves over ASM in its accuracy and precision to search region. (c) GC-ASM requires far fewer landmarks (about 1/3 of ASM) than ASM. (d) GC-ASM achieves full automation in the segmentation step compared to GC which requires seed specification and improves on the accuracy of GC. (e) One disadvantage of GC-ASM is its increased computational expense owing to the iterative nature of the algorithm.

Twelfth European TRIGA users conference. Papers and abstracts

International Nuclear Information System (INIS)

2008-01-01

The Twelfth European TRIGA Users Conference was held in Pitesti, Romania, on September 28 - October 1, 1992, under the sponsorship of the Institute for Nuclear Research. The papers which follow in this document are presented in the same order as listed in the Conference Program. All papers which were received for publication (44) have been included. Those papers which were presented but not received for publication are presented in abstract form (3). The European TRIGA9 Owners' Group was fortunate to be hosted by the owners and users of the world's largest TRIGA reactor - the 14-MW Romanian research and test reactor. For too many years it has been impossible to enjoy open interactions with the Romanian researchers. By hosting the 1992 European TRIGA Users' Conference in Romania, the Romanians accomplished a breakthrough in the exchange of TRIGA reactor technology. It was very interesting for the Conference attendees from the West to learn about the large scope of excellent work conducted in Romania, especially at the Institute of Nuclear Research in Pitesti. Similarly, it was fortunate that a large attendance of Romanian researchers from many institutes, universities, and government agencies could attend the Conference and interact with their counterparts from outside Romania. The proceedings of the conference were structured onto the following 6 subject matters: - Opening Session and Introduction; - Session I, Operating and Maintenance Experience (10 papers); - Session II, Reactor Physics And Fuel Utilization (11 papers); - Session III, Instrumentation and Control (5 papers); - Session IV, Irradiation Facilities, Experimental Accessories (8 papers); - Session V, Applications, New Development of TRIGA Concept (6 papers). The document is completed with the abstracts of 3 contributions. A number of 19 experts from Austria, Germany, Italy, United States, Turkey, Morocco, England, Slovenia and Albania, that use TRIGA reactors, and Romania attended the conference. The

Posters. [Poster Session at AHRD Conference, 2001].

Science.gov (United States)

2001

The first of the papers in this poster session, "Developing the Employment Brand: Targeting MBA Campus Hires" (Diane M. Bergeron), posits that employment branding benefits both individuals and organizations. It functions as a campus recruiting tool in a competitive labor market and communicates the organization's values and work…

Session 1 - discussion

International Nuclear Information System (INIS)

Wells, C.; Richards, K.M.; McKerrow, J.F.

1991-01-01

This discussion session of the Landfill Gas-Energy and Environment 90 Conference covered the landfill gas potential, the setting up of the Non-Fossil Fuel Obligation; anticipated developments in the post 1998 period, the problem of smell for those who live near a landfill, and the length of time a landfill site is productive in terms of gas evolution. Relevant regulations in California are briefly discussed. (author)

Operating nuclear plant feedback to ASME and French codes

International Nuclear Information System (INIS)

Journet, J.; O'Donnell, W.J.

1996-01-01

The French have an advantage in nuclear plant operating experience feedback due to the highly centralized nature of their nuclear industry. There is only one utility in charge of design as well as operations (EDF) and only one reactor vendor (Framatome). The ASME Code has played a key role in resolving technical issues in the design and operation of nuclear plants since the inception of nuclear power. The committee structure of the Code brings an ideal combination of senior technical people with both broad and specialized experience to bear on complex how safe is safe enough technical issues. The authors now see an even greater role for the ASME Code in a proposed new regulatory era for the US nuclear industry. The current legalistic confrontational regulatory era has been quite destructive. There now appears to be a real opportunity to begin a new era of technical consensus as the primary means for resolving safety issues. This change can quickly be brought about by having the industry take operating plant problems and regulatory technical issues directly to the ASME Code for timely resolution. Surprisingly, there is no institution in the US nuclear industry with such a mandate. In fact, the industry is organized to feedback through the Nuclear Regulatory Commission issues which could be far better resolved through the ASME Code. Major regulatory benefits can be achieved by closing this loop and providing systematic interaction with the ASME Code. The essential elements of a new regulatory era and ideas for organizing US institutional industry responsibilities, taken from the French experience, are described in this paper

ASME method for particle reconstruction

International Nuclear Information System (INIS)

Ierusalimov, A.P.

2009-01-01

The method of approximate solution of motion equation (ASME) was used to reconstruct the parameters for charged particles. It provides a good precision for momentum, angular and space parameters of particles in coordinate detectors. The application of the method for CBM, HADES and MPD/NICA setups is discussed

Proceedings of the 1999 Review Conference on Fuel Cell Technology

Energy Technology Data Exchange (ETDEWEB)

None Available

2000-06-05

The 1999 Review Conference on Fuel Cell Technology was jointly sponsored by the U.S. Department of Energy, Federal Energy Technology Center (FETC), the Gas Research Institute (GRI), and the Electric Power Research Institute (EPRI). It was held August 3 to 5 in Chicago, Illinois. The goal of this conference was to provide a forum for reviewing fuel cell research and development (R&D) programs, assist in strategic R&D planning, promote awareness of sponsor activities, and enhance interactions between manufacturers, researchers, and stakeholders. This conference was attended by over 250 representatives from industry, academia, national laboratories, gas and electric utilities, DOE, and other Government agencies. The conference agenda included a keynote session, five presentation sessions, a poster presentation reception, and three breakout sessions. The presentation session topics were DOD Fuel Cell Applications, Low-Temperature Fuel Cell Manufacturers, Low-Temperature Component Research, High-Temperature Fuel Cell Manufacturers, and High-Temperature Component Research; the breakout session topics were Future R&D Directions for Low-Temperature Fuel Cells, Future R&D Directions for High-Temperature Fuel Cells, and a plenary summary session. All sessions were well attended.

Conference report: formulating better medicines for children: 4th European Paediatric Formulation Initiative conference.

Science.gov (United States)

Walsh, Jennifer; Mills, Simon

2013-01-01

The fourth annual European Paediatric Formulation Initiative (EuPFI) conference on Formulating Better Medicines for Children was held on 19-20 September 2012 at the Institute of Molecular Genetics Congress Centre, Prague, Czech Republic. The 2-day conference concentrated on the latest advances, challenges and opportunities for developing medicinal products and administration devices for pediatric use, both from European and US perspectives. It was aimed specifically at providing exposure to emerging practical applications, and for illustrating remedies utilized by pediatric drug-development teams to overcome hurdles faced in developing medicines for pediatric patients. The conference format included plenary talks, focus sessions on each of the EuPFI work streams (extemporaneous preparations, excipients, pediatric administration devices, taste masking and taste assessment, age-appropriate formulations), case studies, soapbox sessions and a parallel poster display. This conference report summarizes the keynote lectures and also gives a flavor of other presentations and posters from the conference.

Regulatory Endorsement Activities for ASME Nuclear Codes and Standards

International Nuclear Information System (INIS)

West, Raymond A.

2006-01-01

The ASME Board on Nuclear Codes and Standards (BNCS) has formed a Task Group on Regulatory Endorsement (TG-RE) that is currently in discussions with the United States Nuclear Regulatory Commission (NRC) to look at suggestions and recommendations that can be used to help with the endorsement of new and revised ASME Nuclear Codes and Standards (NC and S). With the coming of new reactors in the USA in the very near future we need to look at both the regulations and all the ASME NC and S to determine where we need to make changes to support these new plants. At the same time it is important that we maintain our operating plants while addressing ageing management needs of our existing reactors. This is going to take new thinking, time, resources, and money. For all this to take place the regulations and requirements that we use must be clear concise and necessary for safety and to that end both the NRC and ASME are working together to make this happen. Because of the influence that the USA has in the world in dealing with these issues, this paper is written to inform the international nuclear engineering community about the issues and what actions are being addressed under this effort. (author)

Conference Analysis Report of Assessments on Defect and Damage for a High Temperature Structure

International Nuclear Information System (INIS)

Lee, Hyeong Yeon

2008-11-01

This report presents the analysis on the state-of-the-art research trends on creep-fatigue damage, defect assessment of high temperature structure, development of heat resistant materials and their behavior at high temperature based on the papers presented in the two international conferences of ASME PVP 2008 which was held in Chicago in July 2008 and CF-5(5th International Conference on Creep, Fatigue and Creep-Fatigue) which was held in Kalpakkam, India in September 2008

Conference Analysis Report of Assessments on Defect and Damage for a High Temperature Structure

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyeong Yeon

2008-11-15

This report presents the analysis on the state-of-the-art research trends on creep-fatigue damage, defect assessment of high temperature structure, development of heat resistant materials and their behavior at high temperature based on the papers presented in the two international conferences of ASME PVP 2008 which was held in Chicago in July 2008 and CF-5(5th International Conference on Creep, Fatigue and Creep-Fatigue) which was held in Kalpakkam, India in September 2008.

5th National Conference on Processing and Characterization of Materials

International Nuclear Information System (INIS)

2016-01-01

This volume contains selected full length technical papers from the oral presentations made during the 5 th National Conference on Processing and Characterization of Materials (NCPCM) 2015 organized by Department of Metallurgical and Materials Engineering, NIT Rourkela, India on 12 th - 13 th December, 2015. The first conference of the NCPCM series was held in December 2011. NCPCM 2015 has successfully carried the tradition of previous conferences. About 100 participants from various organizations across India have participated in the conference. The conference has attracted researchers, scientists and engineers from various R and D organizations, academic institutions and industries at a single forum. The interdisciplinary approach of the conference allowed the participants to look beyond their areas of activities. Besides oral presentations the conference also had poster and metallography sessions. The conference had four technical sessions. The themes of the sessions were: Materials Processing, Characterization, Materials Deformation and Materials Modelling and Simulation. In all, during the two day conference about fifty contributory talks along with four keynote lectures were presented. Out of these, forty peer-reviewed papers have been selected for publication in this volume of IOP Conference Series: Materials Science and Engineering. We would like to thank all the contributors, members of the organizing committee, session chairs as well as colleagues and students who helped us with the preparation of the conference and particularly, with the preparation of this volume. We would also like to convey our heartiest gratitude to all the sponsors of NCPCM 2015. (paper)

Integrin and GPCR Crosstalk in the Regulation of ASM Contraction Signaling in Asthma.

Science.gov (United States)

Teoh, Chun Ming; Tam, John Kit Chung; Tran, Thai

2012-01-01

Airway hyperresponsiveness (AHR) is one of the cardinal features of asthma. Contraction of airway smooth muscle (ASM) cells that line the airway wall is thought to influence aspects of AHR, resulting in excessive narrowing or occlusion of the airway. ASM contraction is primarily controlled by agonists that bind G protein-coupled receptor (GPCR), which are expressed on ASM. Integrins also play a role in regulating ASM contraction signaling. As therapies for asthma are based on symptom relief, better understanding of the crosstalk between GPCRs and integrins holds good promise for the design of more effective therapies that target the underlying cellular and molecular mechanism that governs AHR. In this paper, we will review current knowledge about integrins and GPCRs in their regulation of ASM contraction signaling and discuss the emerging concept of crosstalk between the two and the implication of this crosstalk on the development of agents that target AHR.

Proceedings of the 2013 AFENET Scientific Conference - Posters sessions

OpenAIRE

Gitta, Sheba Nakacubo; Kamadjeu, Raoul; Mwesiga, Allan; Wamala, Joseph Francis; Odhiambo, Fredrick; Lusukamu, Pedro; Burimuah, Vitus; Shilunga, Primus; Macha, Elida; Opare, Joseph Kwadwo-Larbi; Muriu, Nelson; Adeoye, Olawunmi Olubunmi; Rweyemamu, Karugira; Lucas, Godbless; Naggayi, Gloria

2015-01-01

Biennially, trainees and graduates of Field Epidemiology and Laboratory Training Programs (FELTPs) are presented with a platform to share investigations and projects undertaken during their two-year training in Applied Epidemiology. The African Field Epidemiology Network (AFENET) Scientific Conference, is a perfect opportunity for public health professionals from various sectors and organizations to come together to discuss issues that impact on public health in Africa. This year's conference...

2010 Plant Molecular Biology Gordon Research Conference

Energy Technology Data Exchange (ETDEWEB)

Michael Sussman

2010-07-23

The Plant Molecular Biology Conference has traditionally covered a breadth of exciting topics and the 2010 conference will continue in that tradition. Emerging concerns about food security have inspired a program with three main themes: (1) genomics, natural variation and breeding to understand adaptation and crop improvement, (2) hormonal cross talk, and (3) plant/microbe interactions. There are also sessions on epigenetics and proteomics/metabolomics. Thus this conference will bring together a range of disciplines, will foster the exchange of ideas and enable participants to learn of the latest developments and ideas in diverse areas of plant biology. The conference provides an excellent opportunity for individuals to discuss their research because additional speakers in each session will be selected from submitted abstracts. There will also be a poster session each day for a two-hour period prior to dinner. In particular, this conference plays a key role in enabling students and postdocs (the next generation of research leaders) to mingle with pioneers in multiple areas of plant science.

Risk-informed technology developments for nuclear power plants within the ASME in 2000-2001

International Nuclear Information System (INIS)

Wesley Rowley, C.; Balkey, K.R.

2001-01-01

The purpose of this paper is to provide information on developments within the ASME to support risk-informing NRC regulations for nuclear power plants. This paper builds on a publication at ICONE-8 that discussed ASME risk-informed nuclear power plant initiatives, both in Research and in Codes and Standards, particularly those related to risk-informing Part 50 of the 10 CFR (Code of federal regulations). During the past year, the ASME BNCS formed a Task Force to focus the Society's efforts to support risk-informing 10 CFR Part 50. Key efforts underway that are guided by the task force include finalizing the ASME PRA (probability risk assessment) Standard, developing a Code Case to risk-inform the repair, replacement, and modification activities for ASME components, and developing a Code Case to risk-inform the safety classification of pressure boundary components. Several other initiatives are also under investigation such as introducing risk insights into other ASME nuclear codes and standards supported by appropriate research and technical basis information. Supplementary information will also be provided to update an initial high level plan of ASME risk-informed initiatives for nuclear power plants that was presented at ICONE-8, including plans to communicate these risk-informed technology developments to the public. The authors included and acknowledged contributions from several other cognizant members of the ASME BNCS (board on nuclear codes standards) Task Group on RIP50 in the paper. (authors)

Topic models for conference session assignment: organising PRASA 2014(5)

CSIR Research Space (South Africa)

Burke, Michael G

2015-11-01

Full Text Available Conference scheduling and organising is a particularly laborious task and can be exteremely time consuming. While many online conference platforms allow manual topic selection, these can be expensive and typically still require that individual...

CERN Technical Training 2004: New Short Courses (SC) on Microsoft Outlook

CERN Multimedia

Monique Duval

2004-01-01

The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) will cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled sessions will take place as follows: Outlook (SC I): E-mail. Next session: 22.10.2004 (9h00-11h00) Outlook (SC II): Calendar, Tasks and Notes. Next session: 22.10.2004 (14h00-16h00) Outlook (SC III): Meetings and Delegation. Next session: 9.11.2004 (14h00-16h00) In particular, SC I will cover how to open, create and send email, work with attachments, use stationery, organise mail, and work with the address book, SC II will show how to work with the calendar, tasks and notes, and SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and...

Inhibition of allergen-induced basophil activation by ASM-024, a nicotinic receptor ligand.

Science.gov (United States)

Watson, Brittany M; Oliveria, John Paul; Nusca, Graeme M; Smith, Steven G; Beaudin, Sue; Dua, Benny; Watson, Rick M; Assayag, Evelynne Israël; Cormier, Yvon F; Sehmi, Roma; Gauvreau, Gail M

2014-01-01

Nicotinic acetylcholine receptors (nAChRs) were identified on eosinophils and shown to regulate inflammatory responses, but nAChR expression on basophils has not been explored yet. We investigated surface receptor expression of nAChR α4, α7 and α1/α3/α5 subunits on basophils. Furthermore, we examined the effects of ASM-024, a synthetic nicotinic ligand, on in vitro anti-IgE and in vivo allergen-induced basophil activation. Basophils were enriched from the peripheral blood of allergic donors and the expression of nAChR subunits and muscarinic receptors was determined. Purified basophils were stimulated with anti-IgE in the presence of ASM-024 with or without muscarinic or nicotinic antagonists for the measurement of CD203c expression and histamine release. The effect of 9 days of treatment with 50 and 200 mg ASM-024 on basophil CD203c expression was examined in the blood of mild allergic asthmatics before and after allergen inhalation challenge. nAChR α4, α7 and α1/α3/α5 receptor subunit expression was detected on basophils. Stimulation of basophils with anti-IgE increased CD203c expression and histamine release, which was inhibited by ASM-024 (10(-5) to 10(-)(3) M, p ASM-024 was reversed in the presence of muscarinic and nicotinic antagonists. In subjects with mild asthma, ASM-024 inhalation significantly inhibited basophil CD203c expression measured 24 h after allergen challenge (p = 0.03). This study shows that ASM-024 inhibits IgE- and allergen-induced basophil activation through both nicotinic and muscarinic receptors, and suggests that ASM-024 may be an efficacious agent for modulating allergic asthma responses. © 2015 S. Karger AG, Basel.

Acid Sphingomyelinase (ASM) is a Negative Regulator of Regulatory T Cell (Treg) Development.

Science.gov (United States)

Zhou, Yuetao; Salker, Madhuri S; Walker, Britta; Münzer, Patrick; Borst, Oliver; Gawaz, Meinrad; Gulbins, Erich; Singh, Yogesh; Lang, Florian

2016-01-01

Regulatory T cell (Treg) is required for the maintenance of tolerance to various tissue antigens and to protect the host from autoimmune disorders. However, Treg may, indirectly, support cancer progression and bacterial infections. Therefore, a balance of Treg function is pivotal for adequate immune responses. Acid sphingomyelinase (ASM) is a rate limiting enzyme involved in the production of ceramide by breaking down sphingomyelin. Previous studies in T-cells have suggested that ASM is involved in CD28 signalling, T lymphocyte granule secretion, degranulation, and vesicle shedding similar to the formation of phosphatidylserine-exposing microparticles from glial cells. However, whether ASM affects the development of Treg has not yet been described. Splenocytes, isolated Naive T lymphocytes and cultured T cells were characterized for various immune T cell markers by flow cytometery. Cell proliferation was measured by Carboxyfluorescein succinimidyl ester (CFSE) dye, cell cycle analysis by Propidium Iodide (PI), mRNA transcripts by q-RT PCR and protein expression by Western Blotting respectively. ASM deficient mice have higher number of Treg compared with littermate control mice. In vitro induction of ASM deficient T cells in the presence of TGF-β and IL-2 lead to a significantly higher number of Foxp3+ induced Treg (iTreg) compared with control T-cells. Further, ASM deficient iTreg has less AKT (serine 473) phosphorylation and Rictor levels compared with control iTreg. Ceramide C6 led to significant reduction of iTreg in both ASM deficient and WT mice. The reduction in iTreg leads to induction of IL-1β, IL-6 and IL-17 but not IFN-γ mRNA levels. ASM is a negative regulator of natural and iTreg. © 2016 The Author(s) Published by S. Karger AG, Basel.

Technology 2004, Vol. 2

Science.gov (United States)

1995-01-01

Proceedings from symposia of the Technology 2004 Conference, November 8-10, 1994, Washington, DC. Volume 2 features papers on computers and software, virtual reality simulation, environmental technology, video and imaging, medical technology and life sciences, robotics and artificial intelligence, and electronics.

International Conference on Physics and Technology of Reactors and Applications

International Nuclear Information System (INIS)

2007-01-01

The first international conference on physics and technology of reactors and applications (PHYTRA 1) which took place in Marrakech (Morocco) from 14 to 16 March 2007, was designed to bring together scientists, teachers and students from universities, research centres and industry and other institutions to exchange knowledge and to discuss ideas and future issues. The programmes of the PHYTRA 1 conference covers a wide variety topics, the conference was organised in three plenary sessions, ten oral technical sessions and two poster sessions. The plenary sessions covers the following topics : The prospects of nuclear energy, The situation of nuclear sciences and energy in Morocco and Africa, and the new development in reactor physics and reactor design [fr

Learning about the Earth as a System. International Conference on Geoscience Education Conference Proceedings (2nd, Hilo, HI, July 28-31, 1997).

Science.gov (United States)

Fortner, Rosanne W., Ed.; Mayer, Victor J., Ed.

Learning about the earth as a system was the focus of the 1997 International Conference on Geoscience Education. This proceedings contains details on the organization of the conference as well as five general sessions by various participants. The interactive poster sessions are organized according to three themes: (1) Earth Systems/Science…

Scientific days, ANDRA 1999. Summary of conferences and poster communications

International Nuclear Information System (INIS)

1999-12-01

This document summarizes the content of the 1999 scientific conference days organized by the French national agency of radioactive wastes (ANDRA). The content comprises: the opening session (2 talks), 4 general conferences dealing with important questions relative to feasibility studies of waste disposal. These conferences are complementary to the four technical sessions developed thereafter (hydro-geochemistry and solutes transport in the geosphere; storage materials; geomechanics; research programs in underground laboratories). A large part of the conference was devoted to poster sessions on the following topics: geology, hydro-geochemistry and hydrogeology, geomechanics, storage materials (metals and clay materials), behaviour of radionuclides (geosphere, biosphere), and numerical analysis applied to hydro-geochemistry and transport. (J.S.)

Update on ASME rules for spent nuclear fuel and high level radioactive material and waste storage containments

International Nuclear Information System (INIS)

Ralph S. Hill III; Foster, G.M.

2005-01-01

In 2004, a new Code Case, N-717, of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (Code) was published. The Code Case provides rules for construction of containments used for storage of spent nuclear fuel and high level radioactive material and waste. The Code Case has been incorporated into Section III of the Code as Division 3, Subsection WC, Class SC Storage Containments, and will be published in the 2005 Addenda. This paper provides an informative background and insight for these rules to provide Owners, regulators, designers, and fabricators with a more comprehensive understanding of the technical basis for these rules. (authors)

ICALEPS 2005 : opening session

CERN Multimedia

Maximilien Brice

2005-01-01

ICALEPCS 2005, the tenth International Conference on Accelerator and Large Experimental Physics Control Systems, will be held in Geneva, Switzerland, 10-14 Oct. 2005 at the International Conference Center Geneva (CICG). ICALEPCS 2005 thus falls in the year that UNESCO has declared the "World Year of Physics". ICALEPCS covers all aspects of control and operation of Experimental Physics facilities such as particle accelerators, particle detectors, optical telescopes, radio telescopes, nuclear fusion facilities like Tokamaks, nuclear reactors, lasers, etc .... Opening session by . A. Daneels (CERN): Introducting ICALEPCS 2005 . C.Lamprecht (Republic & State of Geneva): Welcome speech . J. Lister (EPFL): Welcome speech . J. Engelen (CERN): The machine and experiment challenges of LHC

Proceedings of the Columbia River Estuary Conference on Ecosystem Restoration, April 29-30, 2008, Astoria, Oregon.

Energy Technology Data Exchange (ETDEWEB)

Johnson, Gary E. [Pacific Northwest National Laboratory; Sutherland, G. Bruce [Oregon Department of Environmental Quality (retired)

2008-09-29

The 2008 Columbia River Estuary Conference was held at the Liberty Theater in Astoria, Oregon, on April 19-20. The conference theme was ecosystem restoration. The purpose of the conference was to exchange data and information among researchers, policy-makers, and the public, i.e., interrelate science with management. Conference organizers invited presentations synthesizing material on Restoration Planning and Implementation (Session 1), Research to Reduce Restoration Uncertainties (Session 2), Wetlands and Flood Management (Session 3), Action Effectiveness Monitoring (Session 4), and Management Perspectives (Session 5). A series of three plenary talks opened the conference. Facilitated speaker and audience discussion periods were held at the end of each session. Contributed posters conveyed additional data and information. These proceedings include abstracts and notes documenting questions from the audience and clarifying answers from the presenter for each talk. The proceedings also document key points from the discussion periods at the end of each session. The conference program is outlined in the agenda section. Speaker biographies are presented in Appendix A. Poster titles and authors are listed in Appendix B. A list of conference attendees is contained in Appendix C. A compact disk, attached to the back cover, contains material in hypertext-markup-language from the conference website (http://cerc.labworks.org/) and the individual presentations.

Building on our past... building for the future. 33rd Annual Canadian Nuclear Society conference and 36th CNS/CNA student conference

International Nuclear Information System (INIS)

2012-01-01

The 33rd Annual Canadian Nuclear Society Conference and 36th CNS/CNA Student Conference was held in Saskatoon, Saskatchewan, Canada on June 10-13, 2012. With the theme of the conference, 'Building on our Past... Building for the Future', the conference specifically noted the 50th anniversary of the first-nuclear-produced electricity in Canada by the small Nuclear Power Demonstration (NPD) plant on June 4, 1962 and the 60th anniversary of the creation of Atomic Energy of Canada Limited in April 1952. The conference brought together over 360 delegates for the technical sessions with very broad subject matter of: physics, environment and waste management, safety and licensing, life extension, fusion technology, fuel and advanced reactors, reactor materials, uranium mining, I and C process, and, thermalhydraulics. Two plenary sessions focussed on: Small Modular Reactors; and, radioisotopes primarily for medical applications. The student conference was well attended with plenary sessions focussing on: Nuclear Industry Power Developments: The Renaissance; and a panel discussion on the overview of the proposed refurbishment of the Darlington four-unit station.

Statement to the forty-fourth regular session of the IAEA General Conference 2000. IAEA General Conference. Vienna, 18 September 2000

International Nuclear Information System (INIS)

ElBaradei, M.

2000-01-01

In his Statement on the forty-fourth regular session of the General Conference of the IAEA, the Director General of the Agency highlighted IAEA's achievements in connection with its major functions: as catalyst for the development and transfer of nuclear technology (nuclear power, nuclear fuel cycle and waste management, preservation of nuclear expertise, nuclear science and applications, laboratory and research activities, future challenges in nuclear technology), as a recognized authority on nuclear safety (international conventions, establishment of international standards, safety services, early shutdown of nuclear power plants, decommissioning issues, Kursk submarine accident, future challenges in nuclear safety), and as an instrument for the verification of nuclear non-proliferation (safeguards agreements and additional protocols, implementation of United Nations Security Council Resolutions relating to Iraq, safeguards agreement with the Democratic People's Republic of Korea, application of IAEA Safeguards in the Middle East, other verification activities, security of material, future challenges in verification. He also discussed the Agency's technical co-operation programme and the Agency management for maximum efficiency and effectiveness, and the new outreach policy

German nuclear law day 2004 - a conference report

International Nuclear Information System (INIS)

Anon.

2005-01-01

Topical issues of nuclear law constituted the main subjects discussed at the 2004 German Nuclear Law Day organized in Berlin on November 11 to 12, 2004. The agenda included actual issues potentially arising from the topics final storage of nuclear waste, financing a new site search for a repository, and supervision of nuclear installations. Experts from the administration of justice, the federal and state governments, law offices, universities, and the industry discussed the matters in 14 lectures. (orig.)

ASM-024, a piperazinium compound, promotes the in vitro relaxation of β2-adrenoreceptor desensitized tracheas.

Science.gov (United States)

Israël-Assayag, Evelyne; Beaulieu, Marie-Josée; Cormier, Yvon

2015-01-01

Inhaled β2-adrenoreceptor agonists are widely used in asthma and chronic obstructive pulmonary disease (COPD) for bronchoconstriction relief. β2-Adrenoreceptor agonists relax airway smooth muscle cells via cyclic adenosine monophosphate (cAMP) mediated pathways. However, prolonged stimulation induces functional desensitization of the β2-adrenoreceptors (β2-AR), potentially leading to reduced clinical efficacy with chronic or prolonged administration. ASM-024, a small synthetic molecule in clinical stage development, has shown activity at the level of nicotinic receptors and possibly at the muscarinic level and presents anti-inflammatory and bronchodilator properties. Aerosolized ASM-024 reduces airway resistance in mice and promotes in-vitro relaxation of tracheal and bronchial preparations from animal and human tissues. ASM-024 increased in vitro relaxation response to maximally effective concentration of short-acting beta-2 agonists in dog and human bronchi. Although the precise mechanisms by which ASM-024 promotes airway smooth muscle (ASM) relaxation remain unclear, we hypothesized that ASM-024 will attenuate and/or abrogate agonist-induced contraction and remain effective despite β2-AR tachyphylaxis. β2-AR tachyphylaxis was induced with salbutamol, salmeterol and formoterol on guinea pig tracheas. The addition of ASM-024 relaxed concentration-dependently intact or β2-AR desensitized tracheal rings precontracted with methacholine. ASM-024 did not induce any elevation of intracellular cAMP in isolated smooth muscle cells; moreover, blockade of the cAMP pathway with an adenylate cyclase inhibitor had no significant effect on ASM-024-induced guinea pig trachea relaxation. Collectively, these findings show that ASM-024 elicits relaxation of β2-AR desensitized tracheal preparations and suggest that ASM-024 mediates smooth muscle relaxation through a different target and signaling pathway than β2-adrenergic receptor agonists. These findings suggest ASM-024

CERN's new arrivals, March 2004.

CERN Document Server

Patrice Loïez

2004-01-01

On Tuesday 9 March 2004, representatives of the CERN Management welcomed recently-recruited staff members and fellows at the trimester session of the Induction Programme (photographed here with Werner Zapf, Head of the Human Resources Department).

Energy optimization of water and wastewater management for municipal and industrial applications conference

Energy Technology Data Exchange (ETDEWEB)

1980-08-01

These proceedings document the presentations given at the Energy Optimization of Water and Wastewater Management for Municipal and Industrial Applications Conference, sponsored by the Department of Energy (DOE). The conference was organized and coordinated by Argonne National Laboratory. The conference focused on energy use and conservation in water and wastewater. The General Session also reflects DOE's commitment to the support and development of waste and wastewater systems that are environmentally acceptable. The conference proceedings are divided into two volumes. Volume 1 contains the General Session and Sessions 1 to 5. Volume 2 covers Sessions 6 to 12. Separate abstracts are prepared for each item within the scope of the Energy Data Base.

Energy optimization of water and wastewater management for municipal and industrial applications conference

Energy Technology Data Exchange (ETDEWEB)

1980-08-01

These proceedings document the presentations given at the Energy Optimization of Water and Wastewater Management for Municipal and Industrial Applications, Conference, sponsored by the Department of Energy (DOE). The conference was organized and coordinated by Argonne National Laboratory. The conference focused on energy use on conservation in water and wastewater. The General Session also reflects DOE's commitment to the support and development of waste and wastewater systems that are environmentally acceptable. The conference proceedings are divided into two volumes. Volume 1 contains the General Session and Sessions 1 to 5. Volume 2 covers Sessions 6 to 12. Separate abstracts are prepared for each item within the scope of the Energy Data Base.

14th International Conference on Practical Applications of Agents and Multi-Agent Systems : Special Sessions

CERN Document Server

Escalona, María; Corchuelo, Rafael; Mathieu, Philippe; Vale, Zita; Campbell, Andrew; Rossi, Silvia; Adam, Emmanuel; Jiménez-López, María; Navarro, Elena; Moreno, María

2016-01-01

PAAMS, the International Conference on Practical Applications of Agents and Multi-Agent Systems is an evolution of the International Workshop on Practical Applications of Agents and Multi-Agent Systems. PAAMS is an international yearly tribune to present, to discuss, and to disseminate the latest developments and the most important outcomes related to real-world applications. It provides a unique opportunity to bring multi-disciplinary experts, academics and practitioners together to exchange their experience in the development of Agents and Multi-Agent Systems. This volume presents the papers that have been accepted for the 2016 in the special sessions: Agents Behaviours and Artificial Markets (ABAM); Advances on Demand Response and Renewable Energy Sources in Agent Based Smart Grids (ADRESS); Agents and Mobile Devices (AM); Agent Methodologies for Intelligent Robotics Applications (AMIRA); Learning, Agents and Formal Languages (LAFLang); Multi-Agent Systems and Ambient Intelligence (MASMAI); Web Mining and ...

Analysis of preservice inspection relief requests and recommendations for ASME code changes

International Nuclear Information System (INIS)

Cook, J.F.

1985-05-01

NRC regulations require that preservice inspection (PSI) of nuclear plants be performed in accordance with referenced editions and addenda of Division 1 rules of Section XI, ''Rules for Inservice Inspection of Nuclear Power Plant Components'', of the ASME Boiler and Pressure Vessel Code (ASME Code). The regulations permit applicants to request and obtain relief from the NRC from specific ASME Code requirements that are determined to be impractical. Applicant requests for relief from preservice inspection (PSI) requirements were compiled and analyzed. From this data, covering a total of 178 relief requests, common problems with examination requirements were identified. Changes to examination requirements to solve selected problems are proposed. By following later ASME Code requirements, 46 out of the 178 relief requests can be eliminated. Implementing proposed Code changes would eliminate another 25 relief requests, leaving 107 relief requests out of the original 178 relief requests covered by this survey

Scientific days, ANDRA 1999. Summary of conferences and poster communications; Journees scientifiques, ANDRA 1999. Resume des conferences et des communications par affiches

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-01

This document summarizes the content of the 1999 scientific conference days organized by the French national agency of radioactive wastes (ANDRA). The content comprises: the opening session (2 talks), 4 general conferences dealing with important questions relative to feasibility studies of waste disposal. These conferencesare complementary to the four technical sessions developed thereafter (hydro-geochemistry and solutes transport in the geosphere; storage materials; geomechanics; research programs in underground laboratories). A large part of the conference was devoted to poster sessions on the following topics: geology, hydro-geochemistry and hydrogeology, geomechanics, storage materials (metals and clay materials), behaviour of radionuclides (geosphere, biosphere), and numerical analysis applied to hydro-geochemistry and transport. (J.S.)

Evaluation of practicality of ASME code, Section XI

International Nuclear Information System (INIS)

Mattu, R.K.; Lauderdale, J.R.; Liu, S.N.; Lance, J.J.

2004-01-01

Many nuclear power plants have found that it is impractical or unduly burdensome to comply with some ASME Boiler and Pressure Code provisions and have sought relief from those provisions from the Nuclear Regulatory Commission. An Electric Power Research Institute (EPRI) project is evaluating such Code provisions and alternatives to them that will meet the safety intent of the Code with less burden on utilities. The methodology is to extract data from an on-line data base of relief requests since 1980, analyse the data to identify burdensome provisions for which there are satisfactory alternatives, and recommend changes in the Code to the ASME. (author)

Plant Molecular Biology 2008 Gordon Research Conference - July 13-18, 2008

Energy Technology Data Exchange (ETDEWEB)

Richard M. Amasino

2009-08-28

The Plant Molecular Biology Conference has traditionally covered a breadth of exciting topics and the 2008 conference will continue in that tradition. There will be sessions on metabolism; new methods to study genomes, proteomes and metabolomes; plant-microbe interactions; plant hormones; epigenetics. A new topic for the conference this year will be bioenergy. Thus this conference will bring together a range of disciplines to foster the exchange ideas and to permit the participants to learn of the latest developments and ideas in diverse areas of plant biology. The conference provides an excellent opportunity for individuals to discuss their research because additional speakers in each session will be selected from submitted abstracts. There will also be a poster session each day for a two-hour period prior to dinner.

CERN Technical Training 2004: New Short Courses (SC) on Microsoft Outlook

CERN Multimedia

Monique Duval

2004-01-01

The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) will cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled sessions will take place as follows: Outlook (SC I): E-mail. Next session: 31.8.2004 (9h00-11h00) Outlook (SC II): Calendar, Tasks and Notes. Next session: 31.8.2004 (14h00-16h00) Outlook (SC III): Meetings and Delegation. Next session: 7.9.2004 (14h00-16h00) In particular, SC I will cover how to open, create and send email, work with attachments, use stationery, organise mail, and work with the address book, SC II will show how to work with the calendar, tasks and notes, and SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and she...

Papers of the 2004 PSAC spring conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This conference provided a forum for industry leaders to discuss current regulatory, legislative and other issues facing the petroleum industry. As a learning event for petroleum service company personnel, it focused on providing delegates with the most current insight, information and training issues affecting the petroleum service industry. The wide range of topics were presented under 3 key areas, transportation operations, transportation management and human capital management. Issues pertaining to transportation operations included: privacy legislation; the impact of fatigue on work performance; workplace injuries; cleaning up spills; road safety; and, occupational competencies. Issues pertaining to transportation management included drug/alcohol testing and managing fleet insurance. Issues pertaining to human capital management included: skills required for effective supervision and leadership; employment rules and standards that apply to business; and engaging employees. The conference featured 12 presentations. refs., tabs., figs.

Papers from the NSU Summer session of 2014 - study group 3

DEFF Research Database (Denmark)

Rendtorff, Jacob Dahl

2014-01-01

In this special issue we present the conference papers by the study group “Crisis and Crisis Scenarios: Normativity, Possibilities and Dilemmas” at the 2014 NSU Summer Session, held between 24th July and 31st July 2014 in Sauðárkrókur, Northern Iceland.......In this special issue we present the conference papers by the study group “Crisis and Crisis Scenarios: Normativity, Possibilities and Dilemmas” at the 2014 NSU Summer Session, held between 24th July and 31st July 2014 in Sauðárkrókur, Northern Iceland....

NIST/ASME Steam Properties Database

Science.gov (United States)

SRD 10 NIST/ASME Steam Properties Database (PC database for purchase)   Based upon the International Association for the Properties of Water and Steam (IAPWS) 1995 formulation for the thermodynamic properties of water and the most recent IAPWS formulations for transport and other properties, this updated version provides water properties over a wide range of conditions according to the accepted international standards.

High Level Analysis, Design and Validation of Distributed Mobile Systems with CoreASM

Science.gov (United States)

Farahbod, R.; Glässer, U.; Jackson, P. J.; Vajihollahi, M.

System design is a creative activity calling for abstract models that facilitate reasoning about the key system attributes (desired requirements and resulting properties) so as to ensure these attributes are properly established prior to actually building a system. We explore here the practical side of using the abstract state machine (ASM) formalism in combination with the CoreASM open source tool environment for high-level design and experimental validation of complex distributed systems. Emphasizing the early phases of the design process, a guiding principle is to support freedom of experimentation by minimizing the need for encoding. CoreASM has been developed and tested building on a broad scope of applications, spanning computational criminology, maritime surveillance and situation analysis. We critically reexamine here the CoreASM project in light of three different application scenarios.

Estimates of margins in ASME Code strength values for stainless steel nuclear piping

International Nuclear Information System (INIS)

Ware, A.G.

1995-01-01

The margins in the ASME Code stainless steel allowable stress values that can be attributed to the variations in material strength are evaluated for nuclear piping steels. Best-fit curves were calculated for the material test data that were used to determine allowable stress values for stainless steels in the ASME Code, supplemented by more recent data, to estimate the mean stresses. The mean yield stresses (on which the stainless steel S m values are based) from the test data are about 15 to 20% greater than the ASME Code yield stress values. The ASME Code yield stress values are estimated to approximately coincide with the 97% confidence limit from the test data. The mean and 97% confidence limit values can be used in the probabilistic risk assessments of nuclear piping

International Conference on Climate Change Adaptation Assessments: Conference summary and statement

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The International Conference on Climate Change Adaptation Assessments was held in St. Petersburg, Russian Federation, from May 22--25, 1995. Sponsored by the Russian Federal Service for Hydrometeorology and Environmental Monitoring, the US Country Studies Program, and the directorate General for International Cooperation of the Netherlands Government, it was the first international conference focusing exclusively on adaptation to climate change. More than 100 people from 29 countries on five continents participated. The conference primarily addressed measures to anticipate the potential effects of climate change to minimize negative effects and take advantage of any positive effects. The focus was on what governments, institutions, and individuals can do to prepare for climate change. The conference dealt with two major topics: What adaptation options are most effective and efficient in anticipating climate change and what methods should be used to assess the effectiveness and efficiency of adaptation options. Brief summaries are given from the following sessions on agriculture; Water resources; coastal resources; ecosystems and forests; fisheries; human settlements; water and agriculture; and the panel session on international adaptation in national communications and other development plans and needs for technical assistance.

Energy and the public: public awareness workshop and plenary session

Energy Technology Data Exchange (ETDEWEB)

1979-07-01

This publication of these two sessions of the conference on February 22 and 23, 1979 was prepared from a verbatim record made by a reporting firm. A separate abstract was prepared for each of the seventeen papers of the public awareness workshops and of the six papers of the plenary session.

A comparative study for SMART steam generator sizing based on ASME and Russian standard

International Nuclear Information System (INIS)

Kim, Y. W.; Kim, J. I.; Jang, M. H.

2000-01-01

A systematic comparison of ASME and Russian standard with respect to the design of SMART steam generator has been carried out. Classification of allowable stress in the Russian standard is quite different from that of ASME. Allowable stress of Russian standard and stress intensity defined in ASME were compared for various steam generator tube material as a function of design temperature. Equations and methodology of determining the thickness for the important parts of steam generator have been analyzed. For the tube subjected to internal and/or external pressure, Russian standard use the same equation in the sizing of tube with different allowable stress. However, ASME use different equations with the same value of allowable stress intensity. The hydraulic test pressure of ASME was also compared with that of Russian standard. In general, hydraulic test pressure determined by Russian standard is higher since it considers difference between allowable stress of test temperature and that of design temperature

Summary of the relativistic heavy ion sessions

International Nuclear Information System (INIS)

Harris, J.W.

1988-01-01

The topics covered in the Relativistic Heavy Ion Sessions span four orders of magnitude in energy in the laboratory and a few more in theory. In the two years since the last Intersections conference, experiments in the field of very high energy heavy ion research have begun at CERN and Brookhaven. The prime motivation for these experiments is the possibility of forming quark matter. This paper is a review of the topics covered in the Relativistic Heavy Ion Sessions

A minimal path searching approach for active shape model (ASM)-based segmentation of the lung

Science.gov (United States)

Guo, Shengwen; Fei, Baowei

2009-02-01

We are developing a minimal path searching method for active shape model (ASM)-based segmentation for detection of lung boundaries on digital radiographs. With the conventional ASM method, the position and shape parameters of the model points are iteratively refined and the target points are updated by the least Mahalanobis distance criterion. We propose an improved searching strategy that extends the searching points in a fan-shape region instead of along the normal direction. A minimal path (MP) deformable model is applied to drive the searching procedure. A statistical shape prior model is incorporated into the segmentation. In order to keep the smoothness of the shape, a smooth constraint is employed to the deformable model. To quantitatively assess the ASM-MP segmentation, we compare the automatic segmentation with manual segmentation for 72 lung digitized radiographs. The distance error between the ASM-MP and manual segmentation is 1.75 +/- 0.33 pixels, while the error is 1.99 +/- 0.45 pixels for the ASM. Our results demonstrate that our ASM-MP method can accurately segment the lung on digital radiographs.

A Minimal Path Searching Approach for Active Shape Model (ASM)-based Segmentation of the Lung.

Science.gov (United States)

Guo, Shengwen; Fei, Baowei

2009-03-27

We are developing a minimal path searching method for active shape model (ASM)-based segmentation for detection of lung boundaries on digital radiographs. With the conventional ASM method, the position and shape parameters of the model points are iteratively refined and the target points are updated by the least Mahalanobis distance criterion. We propose an improved searching strategy that extends the searching points in a fan-shape region instead of along the normal direction. A minimal path (MP) deformable model is applied to drive the searching procedure. A statistical shape prior model is incorporated into the segmentation. In order to keep the smoothness of the shape, a smooth constraint is employed to the deformable model. To quantitatively assess the ASM-MP segmentation, we compare the automatic segmentation with manual segmentation for 72 lung digitized radiographs. The distance error between the ASM-MP and manual segmentation is 1.75 ± 0.33 pixels, while the error is 1.99 ± 0.45 pixels for the ASM. Our results demonstrate that our ASM-MP method can accurately segment the lung on digital radiographs.

Passport of global nuclear business. ASME code certificate acquirement and inspection practices

International Nuclear Information System (INIS)

Kawabata, Hiroyuki; Terajima, Makoto; Anami, Kazuhiro

2010-01-01

There are possibilities of Japanese nuclear industries to participate in global business such as new and additional construction of nuclear power plants in US and also Asian and other developing countries in the world. It is requisite to acquire ASME code certificate for global business participation, just as passport. This article consists of five papers on present status of ASME code certificate acquirement and inspection practices of nuclear components vendors in the area of Japanese nuclear business. Activities of JSME Committee on Power Generation Facility Codes to make JSME codes corresponded to ASME nuclear codes and standards for their international deployment are also described. (T. Tanaka)

Review of ASME nuclear codes and standards- subcommittee on repairs, replacements, and modifications

International Nuclear Information System (INIS)

Mawson, T.J.

1990-01-01

As requested by the ASME board on Nuclear Codes and Standards, the Pressure Vessel Research Committee initiated a project to review Sections III and XI of the ASME Boiler and Pressure Vessel Code for the purposes of improving, clarifying, providing transition, consistency, compatibility, and simplifying code requirements. The project was organized with six subcommittees to address various Code activities: design; tests and examinations; documentation; quality assurance; repair, replacement and modification; and general requirements. This paper discusses how the subcommittee on repair, replacement and modification was organized to review the repair, replacement and modification requirements of the ASME boiler and pressure vessel code, Section III and Section XI for Class 1, 2, and 3 and MC components and their supports, and other documents of the nuclear industry related to the repair, replacement and modification requirements of the ASME code

[Ca2+]i oscillations in ASM: relationship with persistent airflow obstruction in asthma.

Science.gov (United States)

Sweeney, David; Hollins, Fay; Gomez, Edith; Saunders, Ruth; Challiss, R A John; Brightling, Christopher E

2014-07-01

The cause of airway smooth muscle (ASM) hypercontractility in asthma is not fully understood. The relationship of spontaneous intracellular calcium oscillation frequency in ASM to asthma severity was investigated. Oscillations were increased in subjects with impaired lung function abolished by extracellular calcium removal, attenuated by caffeine and unaffected by verapamil or nitrendipine. Whether modulation of increased spontaneous intracellular calcium oscillations in ASM from patients with impaired lung function represents a therapeutic target warrants further investigation. © 2014 The Authors. Respirology published by Wiley Publishing Asia Pty Ltd on behalf of Asian Pacific Society of Respirology.

Proceedings of the CERI 2004 electricity conference : the future of electric power in North America. CD ed.

International Nuclear Information System (INIS)

2004-01-01

This conference offered an opportunity to review energy markets in North American with particular reference to opportunities for traditional technologies and new generation technologies based on renewable energy sources including wind powered generation. The presentations focused on relative fuel prices and the potential for distributed generation and demand side management. Several presentations examined the issue of why Canadian and North American markets remain divided about the best market design and how to ensure reliability. The 6 sessions were entitled: the future of generation in Canada; wind power opportunities and constraints; new business opportunities for distributed power and demand side management; the future of restructuring in North America; reliability; and, the future of restructuring in Alberta. tabs., figs

Statement of the Director General to the forty-second regular session of the General Conference of the International Atomic Energy Agency

International Nuclear Information System (INIS)

1998-01-01

In his Statement on the forty-second regular session of the General Conference of the IAEA, the Director General of the Agency highlighted the role of the IAEA in four areas: nuclear power and the fuel cycle, nuclear and radiation safety, nuclear verification and the security of material, and transfer of technology. The final part of the Statement is devoted to the process of programme and management review initiated by the Director General to ensure that the Agency maintains and enhances its record as an effective and efficient organization

Security 2004: ISSUP Conference: Pretoria, South Africa ...

African Journals Online (AJOL)

African Safety Promotion: A Journal of Injury and Violence Prevention. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 2 (2004) >. Log in or Register to get access to full text downloads.

Investigating ASME allowable loads with finite element analyses

International Nuclear Information System (INIS)

Mattar Neto, Miguel; Bezerra, Luciano M.; Miranda, Carlos A. de J.; Cruz, Julio R.B.

1995-01-01

The evaluation of nuclear components using finite element analysis (FEA) does not generally fall into the shell type verification adopted by the ASME Code. Consequently, the demonstration that the modes of failure are avoided sometimes is not straightforward. Allowable limits, developed by limit load theory, require the computation of shell membrane and bending stresses. How to calculate these stresses from FEA is not necessarily self-evident. One approach to be considered is to develop recommendations in a case-by-case basis for the most common pressure vessel geometries and loads based on comparison between the results of elastic and plastic FEA. In this paper, FE analyses of common 2D and complex 3D geometries are examined and discussed. It will be clear that in the cases studied, stress separation and categorization are not self-evident and simple tasks to undertake. Certain unclear recommendations of ASME Code can lead the stress analyst to non conservative designs as will be demonstrated in this paper. At the endo of this paper, taking into account comparison between elastic and elastic-plastic FE results from ANSYS some observations, suggestions and conclusions about the degree of conservatism of the ASME recommendations will be addressed. (author)

20 Years of the MENC Biennial Conference: A Content Analysis

Science.gov (United States)

Palkki, Joshua; Albert, Daniel J.; Hill, Stuart Chapman; Shaw, Ryan D.

2016-01-01

The purpose of this study was to investigate the content and intended audiences for educational sessions offered at MENC biennial conferences in order to illuminate trends and topics in professional development. The researchers performed a content analysis of each session (N?= 2,593) using program booklets from conferences between 1988 and 2008,…

Nineteenth annual actinide separations conference: Conference program and abstracts

International Nuclear Information System (INIS)

Bronson, M.

1995-01-01

This report contains the abstracts from the conference presentations. Sessions were divided into the following topics: Waste treatment; Spent fuel treatment; Issues and responses to Defense Nuclear Facility Safety Board 94-1; Pyrochemical technologies; Disposition technologies; and Aqueous separation technologies

Nineteenth annual actinide separations conference: Conference program and abstracts

Energy Technology Data Exchange (ETDEWEB)

Bronson, M. [ed.

1995-12-31

This report contains the abstracts from the conference presentations. Sessions were divided into the following topics: Waste treatment; Spent fuel treatment; Issues and responses to Defense Nuclear Facility Safety Board 94-1; Pyrochemical technologies; Disposition technologies; and Aqueous separation technologies.

Human Reliability Analysis: session summary

International Nuclear Information System (INIS)

Hall, R.E.

1985-01-01

The use of Human Reliability Analysis (HRA) to identify and resolve human factors issues has significantly increased over the past two years. Today, utilities, research institutions, consulting firms, and the regulatory agency have found a common application of HRA tools and Probabilistic Risk Assessment (PRA). The ''1985 IEEE Third Conference on Human Factors and Power Plants'' devoted three sessions to the discussion of these applications and a review of the insights so gained. This paper summarizes the three sessions and presents those common conclusions that were discussed during the meeting. The paper concludes that session participants supported the use of an adequately documented ''living PRA'' to address human factors issues in design and procedural changes, regulatory compliance, and training and that the techniques can produce cost effective qualitative results that are complementary to more classical human factors methods

2nd ASME-JSME international conference on nuclear engineering -- 1993

International Nuclear Information System (INIS)

Peterson, P.F.

1993-01-01

Volume 1 of this conference covers the following: (1) reactor thermal hydraulic fundamentals; (2) two-phase flow technology; (3) thermal hydraulic phenomena and modeling in nuclear power plants; (4) thermal hydraulic phenomena and modeling in advanced plants; (5) plant transient and accident analysis; (6) performance and reliability evaluation of advanced passive systems; (7) severe accident analysis; (8) severe accident phenomena and experimental investigations; (9) severe accident features and considerations in advanced plants; (10) safety criteria and philosophy; (11) update on VVER safety; (12) safety and reliability features of liquid metal reactor designs; (13) experimental programs in support of advanced reactor plant safety; and (14) passive safety features in advanced plants. Separate abstracts were prepared for 93 papers in this volume

2nd UNet conference

CERN Document Server

Menasche, Daniel; Sabir, Essaïd; Pellegrini, Francesco; Benjillali, Mustapha

2017-01-01

This volume offers the proceedings of the 2nd UNet conference, held in Casablanca May 30 - June 1, 2016. It presents new trends and findings in hot topics related to ubiquitous computing/networking, covered in three tracks and three special sessions: Main Track 1: Context-Awareness and Autonomy Paradigms Track Main Track 2: Mobile Edge Networking and Virtualization Track Main Track 3: Enablers, Challenges and Applications Special Session 1: Smart Cities and Urban Informatics for Sustainable Development Special Session 2: Unmanned Aerial Vehicles From Theory to Applications Special Session 3: From Data to Knowledge: Big Data applications and solutions.

Predicting E-commerce Consumer Behaviour Using Sparse Session Data

OpenAIRE

Thorrud, Thorstein Kaldahl; Myklatun, Øyvind

2015-01-01

This thesis research consumer behavior in an e-commerce domain by using a data set of sparse session data collected from an anonymous European e-commerce site. The goal is to predict whether a consumer session results in a purchase, and if so, which items are purchased. The data is supplied by the ACM Recommender System Challenge, which is a yearly challenge held by the ACM Recommender System Conference. Classification is used for predicting whether or not a session made a purchase, as w...

ASM LabCap's contributions to disease surveillance and the International Health Regulations (2005).

Science.gov (United States)

Specter, Steven; Schuermann, Lily; Hakiruwizera, Celestin; Sow, Mah-Séré Keita

2010-12-03

The revised International Health Regulations [IHR(2005)], which requires the Member States of the World Health Organization (WHO) to develop core capacities to detect, assess, report, and respond to public health threats, is bringing new challenges for national and international surveillance systems. As more countries move toward implementation and/or strengthening of their infectious disease surveillance programs, the strengthening of clinical microbiology laboratories becomes increasingly important because they serve as the first line responders to detect new and emerging microbial threats, re-emerging infectious diseases, the spread of antibiotic resistance, and the possibility of bioterrorism. In fact, IHR(2005) Core Capacity #8, "Laboratory", requires that laboratory services be a part of every phase of alert and response.Public health laboratories in many resource-constrained countries require financial and technical assistance to build their capacity. In recognition of this, in 2006, the American Society for Microbiology (ASM) established an International Laboratory Capacity Building Program, LabCap, housed under the ASM International Board. ASM LabCap utilizes ASM's vast resources and its membership's expertise-40,000 microbiologists worldwide-to strengthen clinical and public health laboratory systems in low and low-middle income countries. ASM LabCap's program activities align with HR(2005) by building the capability of resource-constrained countries to develop quality-assured, laboratory-based information which is critical to disease surveillance and the rapid detection of disease outbreaks, whether they stem from natural, deliberate or accidental causes.ASM LabCap helps build laboratory capacity under a cooperative agreement with the U.S. Centers for Disease Control and Prevention (CDC) and under a sub-contract with the Program for Appropriate Technology in Health (PATH) funded by the United States Agency for International Development (USAID

Summary of spin physics sessions

International Nuclear Information System (INIS)

Roser, T.

1988-01-01

The list of topics in the many talks given during the Spin Physics sessions of this Intersections conference is nearly as long as the one of this conference: P and T Violation NN Interaction πp and πd Elastic Scattering Nuclear Matter Spin Effects Muon (g-2) Polarized Proton Beams Polarized Gas Targets This points to the almost trivial fact that spin is fundamental to our understanding of nuclear and particle physics. I will discuss in some detail only four of these topics. Needless to say this choice is very much personally biased and I apologize to all the speakers whose excellent contributions I did not include

Proceedings of the 1999 Oil and Gas Conference: Technology Options for Producer Survival

Energy Technology Data Exchange (ETDEWEB)

None available

2000-04-12

The 1999 Oil & Gas Conference was cosponsored by the U.S. Department of Energy (DOE), Office of Fossil Energy, Federal Energy Technology Center (FETC) and National Petroleum Technology Office (NPTO) on June 28 to 30 in Dallas, Texas. The Oil & Gas Conference theme, Technology Options for Producer Survival, reflects the need for development and implementation of new technologies to ensure an affordable, reliable energy future. The conference was attended by nearly 250 representatives from industry, academia, national laboratories, DOE, and other Government agencies. Three preconference workshops (Downhole Separation Technologies: Is it Applicable for Your Operations, Exploring and developing Naturally Fractured Low-Permeability Gas Reservoirs from the Rocky Mountains to the Austin Chalk, and Software Program Applications) were held. The conference agenda included an opening plenary session, three platform sessions (Sessions 2 and 3 were split into 2 concurrent topics), and a poster presentation reception. The platform session topics were Converting Your Resources Into Reserves (Sessions 1 and 2A), Clarifying Your Subsurface Vision (Session 2B), and High Performance, Cost Effective Drilling, Completion, Stimulation Technologies (Session 3B). In total, there were 5 opening speakers, 30 presenters, and 16 poster presentations.

Proceedings of the Northwest regional energy conference

Energy Technology Data Exchange (ETDEWEB)

Denman, A S; Comstock, D R [eds.

1978-12-01

The conference was directed toward two main objectives. First, a major portion of the proceedings were to focus on the policies, programs, and priorities of the new US DOE, and their relationships to the Pacific Northwest region. Second, the conference was to explore specific energy issues of regional significance and provide an opportunity for regional feedback on energy policies. The 10 sessions of the conference are Keynote Session: Congress, and the National Energy Plan Sen. Henry Jackson; National Perspectives on Energy Issues (I): An Overview of the NEP, Programs and Priorities of DOE (Alvin Alm and NEP - Conservation and Solar Applications (Don Beattie); and Luncheon address - Alaska Energy Issues (Robert LeResche); National Perspectives on Energy Issues (II): Utility Rate Reform - National Provisions and Relationships to the Pacific Northwest (David Bardin) and Technology for Energy and Long Term Short Alternatives (Robert Thorne); Concurrent Interest Group Sessions: State and Local Roles in Energy Planning and Decision-Making and Industry and University Roles in DOE Research and Programs; Banquet address. The US Energy Future (James Schlesinger); Regional Perspectives on Energy Issues: DOE-X - Organization and Response to Regional Needs (Randall Hardy). What Comes After Number 13 (Sterling Munro), Hanford 1978 (Alex Fremling), and Low Head Hydro and Geothermal (Richard Wood); Lucheon address - The Washington Perspective on Energy (Dixie Lee Ray); Regional Power Planning (Panel); and Conference Wrap Up Session. (MCW)

Child-Computer Interaction: ICMI 2012 special session

NARCIS (Netherlands)

Nijholt, Antinus; Morency, L.P.; Bohus, L.; Aghajan, H.; Nijholt, Antinus; Cassell, J.; Epps, J.

2012-01-01

This is a short introduction to the special session on child computer interaction at the International Conference on Multimodal Interaction 2012 (ICMI 2012). In human-computer interaction users have become participants in the design process. This is not different for child computer interaction

ASME section XI: rules for inservice inspection of nuclear power plants -an introspection

Energy Technology Data Exchange (ETDEWEB)

John, P K; Anto, Y; Mungikar, C P; Wagh, P M [Nuclear Power Corporation of India Ltd., Tarapur (India). Tarapur Atomic Power Station

1994-12-31

Section XI of the ASME BPV code is addressed to the examination, test and inspection requirements of the components of nuclear power plants (NPPs). Since its inception in 1970, this code section has undergone vast changes -probably the most among other ASME BPV code sections. Section XI is full fledged and lays down requirements with regard to all preservice inspections, inservice inspection, repair and replacement of components, tests of system etc. Tarapur Atomic Power Station (TAPS) has the distinction of being one of the earliest BWR type NPPs in the world that has an inservice inspection programme organised in line with the ASME section XI requirements. This paper summarises the experiences gained from time to time using this code section and a few suggestions to prospective users. An effort is also made to explain the philosophy of inservice inspection from ASME section XI point of view. 3 refs.

ASME section XI: rules for inservice inspection of nuclear power plants -an introspection

International Nuclear Information System (INIS)

John, P.K.; Anto, Y.; Mungikar, C.P.; Wagh, P.M.

1994-01-01

Section XI of the ASME BPV code is addressed to the examination, test and inspection requirements of the components of nuclear power plants (NPPs). Since its inception in 1970, this code section has undergone vast changes -probably the most among other ASME BPV code sections. Section XI is full fledged and lays down requirements with regard to all preservice inspections, inservice inspection, repair and replacement of components, tests of system etc. Tarapur Atomic Power Station (TAPS) has the distinction of being one of the earliest BWR type NPPs in the world that has an inservice inspection programme organised in line with the ASME section XI requirements. This paper summarises the experiences gained from time to time using this code section and a few suggestions to prospective users. An effort is also made to explain the philosophy of inservice inspection from ASME section XI point of view. 3 refs

8th Rochester Conference on Coherence and Quantum Optics

CERN Document Server

2001-01-01

The Eighth Rochester Conference on Coherence and Quantum Optics was held on the campus of the University of Rochester during the period June 13-16,2001. This volume contains the proceedings of the meeting. The meeting was preceded by an affiliated conference, the International Conference on Quantum Information, with some overlapping sessions on June 13. The proceedings of the affiliated conference will be published separately by the Optical Society of America. A few papers that were presented in common plenary sessions of the two conferences will be published in both proceedings volumes. More than 268 scientists from 28 countries participated in the week long discussions and presentations. This Conference differed from the previous seven in the CQO series in several ways, the most important of which was the absence of Leonard Mandel. Professor Mandel died a few months before the conference. A special memorial symposium in his honor was held at the end of the conference. The presentations from that sym...

Radioactive waste management. Introductory statement of the 3rd scientific forum during the 44th session of the IAEA General Conference. Vienna, 19 September 2000

International Nuclear Information System (INIS)

ElBaradei, M.

2000-01-01

The document reproduces the text of the introductory statement made by the Director General of the IAEA at the 3rd scientific forum organized during the 44th session of the IAEA General Conference, Vienna, 19 september 2000, on the management of radioactive waste. He emphasized the following aspects: progress made in technology and public acceptance, global challenges, international co-operation, building a stronger framework

Technical requirements for the ASME PRA standard for nuclear power plant applications

International Nuclear Information System (INIS)

Fleming, Karl N.; Bernsen, Sidney A.; Simard, Ronald L.

2000-01-01

In 1998 the American Society of Mechanical Engineers (ASME) formed the Committee on Nuclear Risk Management (CNRM) and a Project Team to develop a standard on PRAs for use in risk informed applications. This ASME standard is being developed to help provide an adequate level of quality in PRAs that are being used to support ASME initiatives to risk informed in-service inspection (ISI) and in-service testing (IST) of nuclear power plant components. A related need supported by the industry and the U.S. Nuclear Regulatory Commission is to reduce the level of effort that is being expended in pilot applications of risk informed initiatives to address questions about the sufficiency of quality in the supporting PRA models. The purpose of this paper is to discuss the authors' views on some of the technical issues that were encountered in the effort to develop the ASME PRA standard. Draft 12 of this standard has been issued for comment, and is currently being finalized with the aim of releasing the standard in early 2001. (author)

Proceedings of the Ontario Energy Association's 2004 annual conference

International Nuclear Information System (INIS)

2004-01-01

The Ontario Energy Association (OEA) is a unique trade association that represents key participants in Ontario's converging natural gas and electricity industries. Its members include energy producers, transmitters, distributors, marketers, and retailers. This conference provided a forum to discuss the role of energy policy and energy conservation in promoting competitive and efficient gas and electricity markets in Ontario. The conference featured 15 presentations, of which 3 have been catalogued separately for inclusion in this database

QoS INVESTIGATION ON MOODLE’S VIDEO CONFERENCE

Directory of Open Access Journals (Sweden)

LINAWATI LINAWATI

2011-06-01

Full Text Available Learning Management System (LMS supports e-learning as a distant learning. Moodle is one of open source LMS applications that allow embedding multimedia into learning activity in a course, such as video conference session. The paper investigates quality of service (QoS of video conference session embedded in Moodle, i.e. end-to-end delay, jitter, throughput, packet loss and PSNR. Three scenarios were implemented in the experiment. The scenarios were applied on both wire and wireless transmission, and p2p and p2m connections. The investigation results show that the QoS of video conference session meets the standards issued by ITU-T G.1010 and G.114, for minimum bandwidth of 128 kbps. Thus the application of video conferencing that is integrated in Moodle can run well with minimum bandwidth of 128 Kbps. 

2008 Gordon Research Conference on Catalysis [Conference summary report

Energy Technology Data Exchange (ETDEWEB)

Soled, Stuart L.; Gray, Nancy Ryan

2009-01-01

The GRC on Catalysis is one of the most prestigious catalysis conferences as it brings together leading researchers from around the world to discuss their latest, most exciting work in catalysis. The 2008 conference will continue this tradition. The conference will cover a variety of themes including new catalytic materials, theoretical and experimental approaches to improve understanding of kinetics and transport phenomena, and state of the art nanoscale characterization probes to monitor active sites. The conference promotes interactions among established researchers and young scientists. It provides a venue for students to meet, talk to and learn from some of the world leading researchers in the area. It also gives them a platform for displaying their own work during the poster sessions. The informal nature of the meeting, excellent quality of the presentations and posters, and ability to meet many outstanding colleagues makes this an excellent conference.

Final report on the Copper Mountain conference on multigrid methods

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

The Copper Mountain Conference on Multigrid Methods was held on April 6-11, 1997. It took the same format used in the previous Copper Mountain Conferences on Multigrid Method conferences. Over 87 mathematicians from all over the world attended the meeting. 56 half-hour talks on current research topics were presented. Talks with similar content were organized into sessions. Session topics included: fluids; domain decomposition; iterative methods; basics; adaptive methods; non-linear filtering; CFD; applications; transport; algebraic solvers; supercomputing; and student paper winners.

Interan '82 conference

International Nuclear Information System (INIS)

Obrusnik, I.

1982-01-01

The conference was held on September 20 to 23, 1982, in Karlovy Vary and was devoted to analytical problems related to the determination of water and air pollution. Some of the papers presented in session ''Water'' dealt with the analysis of water contaminated by nuclear power plants, and the use of tracer techniques. The session devoted to the atmosphere heard several papers devoted to the use of neutron activation analysis for analyzing air pollution. (Ha)

Interpreting ASME limits and philosophy in FEA of pressure vessel parts

International Nuclear Information System (INIS)

Bezerra, L.M.; Cruz, J.R.B.; Miranda, C.A.J.; Neto, M.M.

1995-01-01

In recent years there has been an effort to interpret finite element (FE) stress results on the light of the ASME B and PV rules and philosophy. Many task groups have issued guidelines on stress linearization and classifications. All those attempts have come up trying to cope modern FE techniques with the rules imposed by the ASME Code. This paper is an independent contribution to the Pressure Vessel Research Council (PVRC) groups which are studying the stress classification and the failure mechanism in a FE framework. This work tries to complement the interesting work by Hollinger and Hechmer presented in the PVP-94 in Minneapolis. In that paper, the authors examined a typical support skirt and showed relations between the skirt collapse load obtained by finite element analysis and the loads allowed from the ASME stress limits. To complement such paper, in the present article, different skirt geometry configurations are analyzed. The configurations here investigated consist of similar support skirts but with different angles of attachments between cylinder and cone parts. It will be possible to observe the influence of the bending stress in the collapse load and its relation to the allowable loads inferred from the ASME limits. A pressure vessel with torispherical head under internal pressure is also examined. Using elastic and limit load FEA, the present paper determines the collapse loads of the configurations. It sets up the relations between these collapse loads, stress categories, and limits dictated by the ASME Code Subsection NB. On the light of NB rules and philosophy, this paper shows how different methods of stress assessment, classification, and limits may influence in the design of a pressure vessel

14 CFR 330.31 - What data must air carriers submit concerning ASMs or RTMs?

Science.gov (United States)

2010-01-01

... combination passenger/cargo carrier, you must have submitted your August 2001 total completed ASM report to... correct an error that you document to the Department, you must not alter the ASM or RTM reports you...

Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2

Science.gov (United States)

Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)

2005-01-01

This conference proceeding is comprised of papers that were presented at the NASA/ONR Circulation Control Workshop held 16-17 March 2004 at the Radisson-Hampton in Hampton, VA. Over two full days, 30 papers and 4 posters were presented with 110 scientists and engineers in attendance, representing 3 countries. As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs, and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the state-of-the-art in circulation control and to assess the future directions and applications for circulation control. The 2004 workshop addressed applications, experiments, computations, and theories related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of single session oral presentations, posters, and written papers that are documented in this unclassified conference proceeding. The format of this written proceeding follows the agenda of the workshop. Each paper is followed with the presentation given at the workshop. the editors compiled brief summaries for each effort that is at the end of this proceeding. These summaries include the paper, oral presentation, and questions or comments that occurred during the workshop. The 2004 Circulation Control Workshop focused on applications including Naval vehicles (Surface and Underwater vehicles), Fixed Wing Aviation (general aviation, commercial, cargo, and business aircraft); V/STOL platforms (helicopters, military aircraft, tilt rotors); propulsion systems (propellers, jet engines, gas turbines), and ground vehicles (automotive, trucks, and other); wind turbines, and other nontraditional applications (e.g., vacuum cleaner, ceiling fan). As part of the CFD focus area of the 2004 CC

2nd International Arctic Ungulate Conference

Directory of Open Access Journals (Sweden)

A. Anonymous

1996-01-01

Full Text Available The 2nd International Arctic Ungulate Conference was held 13-17 August 1995 on the University of Alaska Fairbanks campus. The Institute of Arctic Biology and the Alaska Cooperative Fish and Wildlife Research Unit were responsible for organizing the conference with assistance from biologists with state and federal agencies and commercial organizations. David R. Klein was chair of the conference organizing committee. Over 200 people attended the conference, coming from 10 different countries. The United States, Canada, and Norway had the largest representation. The conference included invited lectures; panel discussions, and about 125 contributed papers. There were five technical sessions on Physiology and Body Condition; Habitat Relationships; Population Dynamics and Management; Behavior, Genetics and Evolution; and Reindeer and Muskox Husbandry. Three panel sessions discussed Comparative caribou management strategies; Management of introduced, reestablished, and expanding muskox populations; and Health risks in translocation of arctic ungulates. Invited lectures focused on the physiology and population dynamics of arctic ungulates; contaminants in food chains of arctic ungulates and lessons learned from the Chernobyl accident; and ecosystem level relationships of the Porcupine Caribou Herd.

Technical Challenge and Demonstration of Advanced Solution Monitoring and Measurement System (ASMS)

International Nuclear Information System (INIS)

Takaya, A.; Mukai, Y.; Nakamura, H.; Hosoma, T.; Yoshimoto, K.; Tamura, T.; Iwamoto, T.

2010-01-01

JNFL and JAEA have collaboratively started to develop an Advanced Solution Measurement and monitoring System (ASMS) as a part of technical challenge intended for next generation safeguards NDA equipment. After we completed feasibility study by using small detectors, the second stage of ASMS has installed into PCDF tank located in a cell, and then tested and calibrated by Pu nitrate solution experimentally. There was no experience measuring around 50kg Pu inventory directly, so it was very challenging work. The conventional SMMS (Solution Monitoring and Measurement System) that is composed of precision manometers acquires density, level and temperature of solution, so that the sampling and analysis are essential to obtain the nuclear material amount in the tank. The SMMS has two weak points on verification and monitoring of the nuclear material flow and inventory; (1) Direct measurement of the inventory cannot be done, (2) Solution rework and reagent adjustment operation in actual plant will make miss-interpretation on the monitoring evaluation. The purpose of ASMS development is to establish quantitative plutonium mass measurement technique directly by NDA of high concentrated pure plutonium nitrate solution and monitoring capability for solution transfers in a process. The merits of ASMS are considered below; (1) Provide direct Pu measurement and continuous monitoring capability, (2) Eliminate sampling and analysis at IIV, (3) Reduce unmeasured inventory. The target of the measurement uncertainty of ASMS is set less than 6% (1sigma) which is equivalent to meet the detection level of the partial defect at IIV by NDA. Known-alpha coincidence counting technique is applied to the ASMS, which is similar to the NDAs for MOX powder as a principle measurement technique. Especially, three following points are key techniques to establish ASMS. (1) Pre-determination of plutonium isotopic composition because it impacts alpha and rho-zero values to obtain multiplication

Design Procedure of Graphite Components by ASME HTR Codes

Energy Technology Data Exchange (ETDEWEB)

Kang, Ji-Ho; Jo, Chang Keun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet.

Design Procedure of Graphite Components by ASME HTR Codes

International Nuclear Information System (INIS)

Kang, Ji-Ho; Jo, Chang Keun

2016-01-01

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet

Tweeting the meeting: A comparative analysis of an Australian emergency medicine conference over four years

Directory of Open Access Journals (Sweden)

Cristian Udovicich

2016-01-01

Full Text Available Objective: Social media allows user-generated content and dialog between users and has also entered into the domain of healthcare. The purpose of this study was to compare the use of Twitter at the Australasian College of Emergency Medicine Annual Scientific Meeting (ACEM ASM from 2011 to 2014 and analyze its ability to spread emergency medicine education. Materials and Methods: Retrospectively, TweetReach was utilized to analyze relevant tweets. Each Annual Scientific Meeting (ASM had an associated Twitter account/s from, which data were collected. Duplicate tweets were excluded from the analysis. Information on the number of total tweets (regular tweets, retweets, and replies and contributors was gathered. The potential audience, the reach, was calculated. Results: From 2011 to 2014 the number of tweets rose from 460 to 4694, a 920% increase. Only 54 Twitter users contributed to the 2011 ASM. This rose to 252 (2012, 291 (2013 and 572 (2014. The average number of tweets per contributor ranged from 8.2 to 10.9. The reach, the potential number of Twitter users exposed to posts, rose >30 times from 2011 (15,502 users to 2014 (471,166. Conclusion: The use of Twitter at the ACEM ASM rose significantly from 2011 to 2014. It is a highly useful tool for the dissemination of emergency medicine education. Twitter has been harnessed by the ASM to enhance the conference experience by further generating interaction between delegates as well as those worldwide.

Tweeting the meeting: A comparative analysis of an Australian emergency medicine conference over four years.

Science.gov (United States)

Udovicich, Cristian; Barberi, Anthony; Perera, Kalpa

2016-01-01

Social media allows user-generated content and dialog between users and has also entered into the domain of healthcare. The purpose of this study was to compare the use of Twitter at the Australasian College of Emergency Medicine Annual Scientific Meeting (ACEM ASM) from 2011 to 2014 and analyze its ability to spread emergency medicine education. Retrospectively, TweetReach was utilized to analyze relevant tweets. Each Annual Scientific Meeting (ASM) had an associated Twitter account/s from, which data were collected. Duplicate tweets were excluded from the analysis. Information on the number of total tweets (regular tweets, retweets, and replies) and contributors was gathered. The potential audience, the reach, was calculated. From 2011 to 2014 the number of tweets rose from 460 to 4694, a 920% increase. Only 54 Twitter users contributed to the 2011 ASM. This rose to 252 (2012), 291 (2013) and 572 (2014). The average number of tweets per contributor ranged from 8.2 to 10.9. The reach, the potential number of Twitter users exposed to posts, rose >30 times from 2011 (15,502 users) to 2014 (471,166). The use of Twitter at the ACEM ASM rose significantly from 2011 to 2014. It is a highly useful tool for the dissemination of emergency medicine education. Twitter has been harnessed by the ASM to enhance the conference experience by further generating interaction between delegates as well as those worldwide.

EDITORIAL: Adaptive and active materials: Selected papers from the ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 11) (Scottsdale, AZ, USA, 18-21 September 2011) Adaptive and active materials: Selected papers from the ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 11) (Scottsdale, AZ, USA, 18-21 September 2011)

Science.gov (United States)

Brei, Diann

2012-09-01

The fourth annual meeting of the ASME/AIAA Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) took place in sunny Scottsdale, Arizona. Each year we strive to grow and offer new experiences. This year we held a special Guest Symposium on Sustainability along with two focused topic tracks on energy harvesting and active composites to encourage cross-fertilization between these important fields and our community. This cross-disciplinary emphasis was reflected in keynote talks by Dr Wayne Brown, President and founder of Dynalloy, Inc., 'Cross-Discipline Sharing'; Dr Brad Allenby, Arizona State University, 'You Want the Future? You can't Handle the Future!'; and Professor Aditi Chattopadhyay, Arizona State University, 'A Multidisciplinary Approach to Structural Health Monitoring and Prognosis'. SMASIS continues to grow our community through both social and technical interchange. The conference location, the exotic Firesky Resort and Spa, exemplified the theme of our Guest Symposium on Sustainability, being the only Green Seal certified resort in Arizona, and highlighting four elements thought to represent all that exist: fire, water, earth and air. Several special events were held around this theme including the night at the oasis reception sponsored by General Motors, sustainability bingo, smart trivia and student networking lunches, and an Arizona pow-wow with a spectacular Indian hoop dance. Our student and young professional development continues to grow strong with best paper and hardware competitions, scavenger student outing and games night. We are very proud that our students and young professionals are always seeking out ways to give back to the community, including organizing outreach to local high school talent. We thank all of our sponsors who made these special events possible. We hope that these social events provided participants with the opportunity to expand their own personal community and broaden their horizons. Our

Second international conference on isotopes. Conference proceedings

International Nuclear Information System (INIS)

Hardy, C.J.

1997-10-01

The Second International Conference on Isotopes (2ICI) was hosted by the Australian Nuclear Association in Sydney, NSW, Australia. The Theme of the Second Conference: Isotopes for Industry, Health and a Better Environment recognizes that isotopes have been used in these fields successfully for many years and offer prospects for increasing use in the future. The worldwide interest in the use of research reactors and accelerators and in applications of stable and radioactive isotopes, isotopic techniques and radiation in industry, agriculture, medicine, environmental studies and research in general, was considered. Other radiation issues including radiation protection and safety were also addressed. International and national overviews and subject reviews invited from leading experts were included to introduce the program of technical sessions. The invited papers were supported by contributions accepted from participants for oral and poster presentation. A Technical Exhibition was held in association with the Conference. This volume contains the foreword, technical program, the author index and of the papers (1-60) presented at the conference

Second international conference on isotopes. Conference proceedings

Energy Technology Data Exchange (ETDEWEB)

Hardy, C J [ed.

1997-10-01

The Second International Conference on Isotopes (2ICI) was hosted by the Australian Nuclear Association in Sydney, NSW, Australia. The Theme of the Second Conference: Isotopes for Industry, Health and a Better Environment recognizes that isotopes have been used in these fields successfully for many years and offer prospects for increasing use in the future. The worldwide interest in the use of research reactors and accelerators and in applications of stable and radioactive isotopes, isotopic techniques and radiation in industry, agriculture, medicine, environmental studies and research in general, was considered. Other radiation issues including radiation protection and safety were also addressed. International and national overviews and subject reviews invited from leading experts were included to introduce the program of technical sessions. The invited papers were supported by contributions accepted from participants for oral and poster presentation. A Technical Exhibition was held in association with the Conference. This volume contains the foreword, technical program, the author index and of the papers (1-60) presented at the conference.

The ASM Curriculum Guidelines for Undergraduate Microbiology: A Case Study of the Advocacy Role of Societies in Reform Efforts.

Science.gov (United States)

Horak, Rachel E A; Merkel, Susan; Chang, Amy

2015-05-01

A number of national reports, including Vision and Change in Undergraduate Biology Education: A Call to Action, have called for drastic changes in how undergraduate biology is taught. To that end, the American Society for Microbiology (ASM) has developed new Curriculum Guidelines for undergraduate microbiology that outline a comprehensive curriculum for any undergraduate introductory microbiology course or program of study. Designed to foster enduring understanding of core microbiology concepts, the Guidelines work synergistically with backwards course design to focus teaching on student-centered goals and priorities. In order to qualitatively assess how the ASM Curriculum Guidelines are used by educators and learn more about the needs of microbiology educators, the ASM Education Board distributed two surveys to the ASM education community. In this report, we discuss the results of these surveys (353 responses). We found that the ASM Curriculum Guidelines are being implemented in many different types of courses at all undergraduate levels. Educators indicated that the ASM Curriculum Guidelines were very helpful when planning courses and assessments. We discuss some specific ways in which the ASM Curriculum Guidelines have been used in undergraduate classrooms. The survey identified some barriers that microbiology educators faced when trying to adopt the ASM Curriculum Guidelines, including lack of time, lack of financial resources, and lack of supporting resources. Given the self-reported challenges to implementing the ASM Curriculum Guidelines in undergraduate classrooms, we identify here some activities related to the ASM Curriculum Guidelines that the ASM Education Board has initiated to assist educators in the implementation process.

The ASM Curriculum Guidelines for Undergraduate Microbiology: A Case Study of the Advocacy Role of Societies in Reform Efforts

Directory of Open Access Journals (Sweden)

Rachel E.A. Horak

2015-03-01

Full Text Available A number of national reports, including Vision and Change in Undergraduate Biology Education: A Call to Action, have called for drastic changes in how undergraduate biology is taught. To that end, the American Society for Microbiology (ASM developed new Curriculum Guidelines for undergraduate microbiology that outline a comprehensive curriculum for any undergraduate introductory microbiology course or program of study. Designed to foster enduring understanding of core microbiology concepts, the Guidelines work synergistically with backwards course design to focus teaching on student-centered goals and priorities.  In order to qualitatively assess how the ASM Curriculum Guidelines are used by educators and learn more about the needs of microbiology educators, the ASM Education Board distributed two surveys to the ASM education community. In this report, we discuss results of these surveys (353 responses. We found that the ASM Curriculum Guidelines are being implemented in many different types of courses at all undergraduate levels. Educators indicated that the ASM Curriculum Guidelines were very helpful when planning courses and assessments. We discuss some specific ways in which the ASM Curriculum Guidelines have been used in undergraduate classrooms. The survey identified some barriers that microbiology educators faced when trying to adopt the ASM Curriculum Guidelines, including lack of time, lack of financial resources, and lack of supporting resources. Given the self-reported challenges to implementing the ASM Curriculum Guidelines in undergraduate classrooms, we identify here some activities related to the ASM Curriculum Guidelines that the ASM Education Board has initiated to assist educators in the implementation process.

Yosemite conference on ionospheric plasma in the magnetosphere: sources, mechanisms and consequences, meeting report

International Nuclear Information System (INIS)

Gallagher, D.L.; Burch, J.L.; Klumpar, D.M.; Moore, T.E.; Waite, J.H. Jr.

1987-02-01

The sixth biennial Yosemite topical conference and the first as a Chapman Conference was held on February 3 to 6, 1986. Although the solar wind was once thought to dominate the supply of plasma in the Earth's magnetosphere, it is now thought that the Earth's ionosphere is a significant contributor. Polar wind and other large volume outflows of plasma have been seen at relatively high altitudes over the polar cap and are now being correlated with outflows found in the magnetotail. The auroral ion fountain and cleft ion fountain are examples of ionospheric sources of plasma in the magnetosphere, observed by the Dynamics Explorer 1 (DE 1) spacecraft. The conference was organized into six sessions: four consisting of prepared oral presentations, one poster session, and one session for open forum discussion. The first three oral sessions dealt separately with the three major topics of the conference, i.e., the sources, mechanisms, and consequences of ionospheric plasma in the magnetosphere. A special session of invited oral presentations was held to discuss extraterrestrial ionospheric/magnetospheric plasma processes. The poster session was extended over two evenings during which presenters discussed their papers on a one-on-one basis. The last session of the conferences was reserved for open discussions of those topics or ideas considered most interesting or controversial

ASME Section XI philosophy related to operating nuclear plant fatigue damage protection

International Nuclear Information System (INIS)

Gosselin, S.R.

1995-01-01

When faced with operating fatigue concerns, nuclear plants traditionally look to the requirements contained in the original construction design code, ASME Section 3, as a basis for component operability. These rules constitute the requirements for nuclear power plant vessel and component construction and, when combined with the Owner's Design Specification, provide reasonable assurance of reliable operation. However, once construction is complete and operation begins, the purpose of any subsequent evaluations shifts from component ''design qualification'' to component ''fitness for service.'' This is a role that has been assumed for ASME Section 11. This paper presents a philosophy, recently endorsed by the ASME Section 11 Executive Committee, intended to guide future Code activities regarding fatigue and its impact on component serviceability

ENS Conference, jointly organised together with FORATOM

International Nuclear Information System (INIS)

2013-01-01

This abstract contains the programme of the 2013 conference on Public Information Materials Exchange, PIME, which is the annual focal point for professional nuclear communicators all around the world. The conference is designed especially for communicators in the nuclear industry and research communities. The PIME programme revolves around a series of plenary sessions and interactive workshops. This programme document lists the contributions made to the 25"t"h anniversary PIME held in Zürich in February 2013 with four plenary sessions and six workshops

States strengthen nuclear cooperation for new millennium. IAEA General Conference concludes in Vienna

International Nuclear Information System (INIS)

1999-01-01

The document gives information about the concluding session of the 43rd regular session of the IAEA's General Conference (27 September - 1 October 1999, Austria Center, Vienna), as well as about the most important steps taken during the week of conference

115-year-old society knows how to reach young scientists: ASM Young Ambassador Program.

Science.gov (United States)

Karczewska-Golec, Joanna

2015-12-25

With around 40,000 members in more than 150 countries, American Society for Microbiology (ASM) faces the challenge of meeting very diverse needs of its increasingly international members base. The newly launched ASM Young Ambassador Program seeks to aid the Society in this effort. Equipped with ASM conceptual support and financing, Young Ambassadors (YAs) design and pursue country-tailored approaches to strengthen the Society's ties with local microbiological communities. In a trans-national setting, the active presence of YAs at important scientific events, such as 16th European Congress on Biotechnology, forges new interactions between ASM and sister societies. The paper presents an overview of the Young Ambassadors-driven initiatives at both global and country levels, and explores the topic of how early-career scientists can contribute to science diplomacy and international relations. Copyright © 2014 Elsevier B.V. All rights reserved.

PREFACE: Electron Microscopy and Analysis Group Conference (EMAG2015)

Science.gov (United States)

MacLaren, Ian

2015-10-01

2015 marked a new venture for the EMAG group of the Institute of Physics in that the conference was held in conjunction with the MMC2015 conference at the wonderful Manchester Central conference centre. As anyone who was there would be able to confirm, this went exceptionally well and was a really vibrant and top quality conference. The oral sessions were filled with good talks, the poster sessions were very lively, and there was a good balance between oral sessions with a specifically "EMAG" identity, and the integration into a larger conference with the ability to switch between up to six parallel sessions covering physical sciences, techniques, and life sciences. The large conference also attracted a wide range of exhibitors, and this is essential for the ongoing success of all of our work, in a field that is very dependent on continued technical innovation and on collaborations between academic researchers and commercial developers of microscopes, holders, detectors, spectrometers, sample preparation equipment, and software, among other things. As has long been the case at EMAG, all oral and poster presenters were invited to submit papers for consideration for the proceedings. As ever, these papers were independently reviewed by other conference attendees, with the aim of continuing the long tradition of the EMAG proceedings being a top quality, peer-reviewed publication, worthy of reference in future years. Whilst I recognise that not all presenters were able to submit papers to the proceedings (for instance due to the need not to prejudice publication in some other journals, or due to avoiding duplicate publication of data), we are gratified that our presenters submitted as many papers as they did. The 41 papers included provide an interesting snapshot of many of the areas covered in the conference presentations, including functional materials, coatings, 3D microscopy, FIB and SEM, nanomaterials, magnetic and structural materials, advances in EM techniques

DOE model conference on waste management and environmental restoration

International Nuclear Information System (INIS)

1990-01-01

Reports dealing with current topics in waste management and environmental restoration were presented at this conference in six sessions. Session 1 covered the ''Hot Topics'' including regulations and risk assessment. Session 2 dealt with waste reduction and minimization; session 3 dealt with waste treatment and disposal. Session 4 covered site characterization and analysis. Environmental restoration and associated technologies wee discussed in session 5 and 6. Individual papers have been cataloged separately

17. radiochemical conference. Booklet of abstracts

International Nuclear Information System (INIS)

Bečková, Věra; Ekberg, Christian; Feldman, Vladimir I.

2014-05-01

The conference was divided into the following sessions: Plenary Session; Radionuclides in the environment, radioecology; Nuclear analytical methods; Chemistry of actinide and trans-actinide elements; Radiation chemistry; Production and application of radionuclides; Separation methods, speciation; Chemistry of nuclear fuel cycle; Radiopharmaceutical chemistry, labelled compounds; and Education / coordination. (P.A.)

The third Geneva Conference

Energy Technology Data Exchange (ETDEWEB)

NONE

1964-12-15

Full text: On 31 August 1964, the Third United Nations International Conference on the Peaceful Uses of Atomic Energy (more familiarly known as the 'Third Geneva') was opened at the Palais des Nations in Geneva by the Secretary-General of the United Nations, U Thant. It was somewhat narrower in scope than the previous conferences held in 1935 and 1958, the emphasis being on nuclear power and closely related topics; the conference showed that recent progress in this field had provided more than ample material for a major international gathering. All three conferences have been organized by the United Nations, but on this occasion responsibility for the scientific aspects was delegated to IAEA. The UN Scientific Advisory Committee provided advice and guidance on the scientific side. Under the presidency of Professor V. S. Emelyanov (USSR) the conference sat from 31 August to 9 September, to deal with a programme divided into eight general sessions and 36 technical sessions, for which a total of nearly 750 papers were presented. About 1800 delegates and advisers, representing 75 countries as well as UN agencies, attended; in addition there were some 2000 observers. The central theme of the conference was experience in the construction and operation of power reactors and recent advances in power technology, together with forecasts of future developments. Nuclear fuels and reactor materials, health and safety, waste disposal, and economics of nuclear power figured largely. Technical sessions were devoted to such subjects as the technical and economic aspects of the power reactor systems currently in operation or being built, and the main lines of development towards more advanced systems and development of the fast breeder. Parallel lines of development of alternative systems were also considered - some, such as organic reactors, having already been the subject of extensive trials, while others are in the conceptual stage. 'Package' power plants designed for easy

The third Geneva Conference

International Nuclear Information System (INIS)

1964-01-01

Full text: On 31 August 1964, the Third United Nations International Conference on the Peaceful Uses of Atomic Energy (more familiarly known as the 'Third Geneva') was opened at the Palais des Nations in Geneva by the Secretary-General of the United Nations, U Thant. It was somewhat narrower in scope than the previous conferences held in 1935 and 1958, the emphasis being on nuclear power and closely related topics; the conference showed that recent progress in this field had provided more than ample material for a major international gathering. All three conferences have been organized by the United Nations, but on this occasion responsibility for the scientific aspects was delegated to IAEA. The UN Scientific Advisory Committee provided advice and guidance on the scientific side. Under the presidency of Professor V. S. Emelyanov (USSR) the conference sat from 31 August to 9 September, to deal with a programme divided into eight general sessions and 36 technical sessions, for which a total of nearly 750 papers were presented. About 1800 delegates and advisers, representing 75 countries as well as UN agencies, attended; in addition there were some 2000 observers. The central theme of the conference was experience in the construction and operation of power reactors and recent advances in power technology, together with forecasts of future developments. Nuclear fuels and reactor materials, health and safety, waste disposal, and economics of nuclear power figured largely. Technical sessions were devoted to such subjects as the technical and economic aspects of the power reactor systems currently in operation or being built, and the main lines of development towards more advanced systems and development of the fast breeder. Parallel lines of development of alternative systems were also considered - some, such as organic reactors, having already been the subject of extensive trials, while others are in the conceptual stage. 'Package' power plants designed for easy

Researching on knowledge architecture of design by analysis based on ASME code

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan

2003-01-01

The quality of knowledge-based system's knowledge architecture is one of decisive factors of knowledge-based system's validity and rationality. For designing the ASME code knowledge based system, this paper presents a knowledge acquisition method which is extracting knowledge through document analysis consulted domain experts' knowledge. Then the paper describes knowledge architecture of design by analysis based on the related rules in ASME code. The knowledge of the knowledge architecture is divided into two categories: one is empirical knowledge, and another is ASME code knowledge. Applied as the basement of the knowledge architecture, a general procedural process of design by analysis that is met the engineering design requirements and designers' conventional mode is generalized and explained detailed in the paper. For the sake of improving inference efficiency and concurrent computation of KBS, a kind of knowledge Petri net (KPN) model is proposed and adopted in expressing the knowledge architecture. Furthermore, for validating and verifying of the empirical rules, five knowledge validation and verification theorems are given in the paper. Moreover the research production is applicable to design the knowledge architecture of ASME codes or other engineering standards. (author)

TOP500 Supercomputers for November 2004

Energy Technology Data Exchange (ETDEWEB)

Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

2004-11-08

24th Edition of TOP500 List of World's Fastest Supercomputers Released: DOE/IBM BlueGene/L and NASA/SGI's Columbia gain Top Positions MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 24th edition of the TOP500 list of the worlds fastest supercomputers was released today (November 8, 2004) at the SC2004 Conference in Pittsburgh, Pa.

Approaching application of risk-based inspection to ASME code section XI

International Nuclear Information System (INIS)

Hedden, Owen F.

1995-01-01

This paper will describe current efforts within the ASME Boiler and Pressure Vessel Committee's Subcommittee on Nuclear Inservice Inspection to introduce risk-based technology to optimize inservice inspection of nuclear power plants. The subcommittee is responsible for the content of ASME Boiler and Pressure Vessel Code Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components. The paper will first provide the historical background for the inspection program currently in Section XI. It will then describe the development of new technology through the ASME Center for Research and Technology Development program. Next, the work now going on in two of the groups under the Section XI committee will be described in detail. Each of these two efforts is directed toward the application of new risk-based inspection technology to nuclear piping systems. Finally, the directions of additional research and applications of the technology will be discussed. (author)

Proceedings of the sixth annual conference on fossil energy materials. Fossil Energy AR and TD Mateials Program

Energy Technology Data Exchange (ETDEWEB)

Cole, N.C.; Judkins, R.R. [comps.

1992-07-01

The Sixth Annual Conference on Fossil Energy Materials was held in Oak Ridge, Tennessee, on May 12--14, 1992. The meeting was sponsored by the US Department of Energy`s Office of Fossil Energy through the Advanced Research and Technology Development (AR&TD) Materials Program, and ASM International. The objective of the AR&TD Materials Program is to conduct research and development on materials for longer-term fossil energy applications as well as for generic needs of various fossil fuel technologies. The management of the Program has been decentralized to the DOE Field Office, Oak Ridge with Oak Ridge National Laboratory (ORNL) as the technical support contractor. The research is performed by staff members at ORNL and by a substantial number of researchers at other national laboratories, universities, and in private industry. The work is divided into the following categories: (1) ceramics, (2) development and corrosion resistance of iron aluminide, advanced austenitic and chromium-niobium alloys, and (3) technology assessment and technology transfer. This conference is held each year to review the work on all of the projects of the Program. The agenda for the meeting is given in Appendix A, and a list of attendees is presented in Appendix B. ASM International cosponsored the conference, for which we are especially grateful.

Technical Training: CERN Technical Training 2004 - New Short Courses (SC) on Microsoft Outlook

CERN Multimedia

Monique Duval

2004-01-01

The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) will cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled sessions will take place as follows: Outlook (SC I): E-mail. Next session: 31.8.2004 (9h00-11h00) Outlook (SC II): Calendar, Tasks and Notes. Next session: 31.8.2004 (14h00-16h00) Outlook (SC III): Meetings and Delegation. Next session: 7.9.2004 (14h00-16h00) In particular, SC I will cover how to open, create and send email, work with attachments, use stationery, organise mail, and work with the address book, SC II will show how to work with the calendar, tasks and notes, and SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and s...

Structural and functional analysis of the ASM p.Ala359Asp mutant that causes acid sphingomyelinase deficiency.

Science.gov (United States)

Acuña, Mariana; Castro-Fernández, Víctor; Latorre, Mauricio; Castro, Juan; Schuchman, Edward H; Guixé, Victoria; González, Mauricio; Zanlungo, Silvana

2016-10-21

Niemann-Pick disease (NPD) type A and B are recessive hereditary disorders caused by deficiency in acid sphingomyelinase (ASM). The p.Ala359Asp mutation has been described in several patients but its functional and structural effects in the protein are unknown. In order to characterize this mutation, we modeled the three-dimensional ASM structure using the recent available crystal of the mammalian ASM as a template. We found that the p.Ala359Asp mutation is localized in the hydrophobic core and far from the sphingomyelin binding site. However, energy function calculations using statistical potentials indicate that the mutation causes a decrease in ASM stability. Therefore, we investigated the functional effect of the p.Ala359Asp mutation in ASM expression, secretion, localization and activity in human fibroblasts. We found a 3.8% residual ASM activity compared to the wild-type enzyme, without changes in the other parameters evaluated. These results support the hypothesis that the p.Ala359Asp mutation causes structural alterations in the hydrophobic environment where ASM is located, decreasing its enzymatic activity. A similar effect was observed in other previously described NPDB mutations located outside the active site of the enzyme. This work shows the first full size ASM mutant model describe at date, providing a complete analysis of the structural and functional effects of the p.Ala359Asp mutation over the stability and activity of the enzyme. Copyright © 2016 Elsevier Inc. All rights reserved.

Sustainable development through nuclear technology : 29th annual conference of the Canadian Nuclear Society and 32nd CNS/CNA student conference

International Nuclear Information System (INIS)

2008-01-01

The 29th Annual Conference of the Canadian Nuclear Society and 32nd CNS/CNA Student Conference on Sustainable Development through Nuclear Technology was held on June 1-4, 2008 in Toronto, Ontario, Canada. The theme of the conference was 'Nuclear Sustainability'. The central objective of this conference was to provide a forum for exchange of views on how this technical enterprise can best serve the needs of humanity, now and in the future. The renewed global interest in nuclear technology is based on a recognition of its potential to meet economic and environmental targets more favourably than competing technologies. Although many of these attractions are short-term in nature, they stem from a broader potential of nuclear technology to drive all aspects of development (social, environmental, economic) in a sustainable in this area. (author) a terial in support of fuel resources themselves. The conference drew a record attendance of over 450 delegates. Over 100 technical papers were presented within 15 technical sessions, as well as over 30 student papers in 5 sessions. The following list of session titles indicates the diversity of the technical papers: advanced reactors; plant and components; process systems; thermalhydraulics; safety and licensing; hydrogen; human factors; physics; instrumentation and control; environment and waste management; and plant operation. (author)

Roles of the outer membrane protein AsmA of Salmonella enterica in the control of marRAB expression and invasion of epithelial cells.

Science.gov (United States)

Prieto, Ana I; Hernández, Sara B; Cota, Ignacio; Pucciarelli, M Graciela; Orlov, Yuri; Ramos-Morales, Francisco; García-del Portillo, Francisco; Casadesús, Josep

2009-06-01

A genetic screen for suppressors of bile sensitivity in DNA adenine methylase (dam) mutants of Salmonella enterica serovar Typhimurium yielded insertions in an uncharacterized locus homologous to the Escherichia coli asmA gene. Disruption of asmA suppressed bile sensitivity also in phoP and wec mutants of S. enterica and increased the MIC of sodium deoxycholate for the parental strain ATCC 14028. Increased levels of marA mRNA were found in asmA, asmA dam, asmA phoP, and asmA wec strains of S. enterica, suggesting that lack of AsmA activates expression of the marRAB operon. Hence, asmA mutations may enhance bile resistance by inducing gene expression changes in the marRAB-controlled Mar regulon. In silico analysis of AsmA structure predicted the existence of one transmembrane domain. Biochemical analysis of subcellular fractions revealed that the asmA gene of S. enterica encodes a protein of approximately 70 kDa located in the outer membrane. Because AsmA is unrelated to known transport and/or efflux systems, we propose that activation of marRAB in asmA mutants may be a consequence of envelope reorganization. Competitive infection of BALB/c mice with asmA(+) and asmA isogenic strains indicated that lack of AsmA attenuates Salmonella virulence by the oral route but not by the intraperitoneal route. Furthermore, asmA mutants showed a reduced ability to invade epithelial cells in vitro.

The approach to analysis of significance of flaws in ASME section III and section XI

International Nuclear Information System (INIS)

Cowan, A.

1979-01-01

ASME III Appendix G and ASME XI Appendix A describe linear elastic fracture mechanics methods to assess the significance of defects in thick-walled pressure vessels for nuclear reactor systems. The assessment of fracture toughness, Ksub(Ic), is based upon recommendations made by a Task Group of the USA Pressure Vessel Research Committee and is dependent upon correlations with drop weight and Charpy V-notch data to give a lower bound of fracture toughness Ksub(IR). The methods used in the ASME Appendices are outlined noting that, whereas ASME III Appendix G defines a procedure for obtaining allowable pressure vessel loadings for normal service in the presence of a defect, ASME XI Appendix A defines methods for assessing the significance of defects (found by volumetric inspection) under normal and emergency and faulted conditions. The methods of analysis are discussed with respect to material properties, flaw characterisation, stress analysis and recommended safety factors; a short discussion is given on the applicability of the data and methods to other materials and non-nuclear structures. (author)

International conference on bone mineral measurement, October 12--13, 1973, Chicago, Illinois

Energy Technology Data Exchange (ETDEWEB)

None

1973-12-31

From international conference on bone mineral measurement; Chicago, Illinois, USA (12 Oct 1973). Abstracts of papers presented at the international conference on bone mineral measurement are presented. The papers were grouped into two sessions: a physical session including papers on measuring techniques, errors, interpretation and correlations, dual photon techniques, and data handling and exchange; a biomedical session including papers on bone disease, osteoporosis, normative data, non-disease influences, renal, and activity and inactivity. (ERB)

Sixteenth International Laser Radar Conference, Part 1

International Nuclear Information System (INIS)

Mccormick, M.P.

1992-07-01

This publication contains extended abstracts of papers presented at the 16th International Laser Radar Conference. One-hundred ninety-five papers were presented in both oral and poster sessions. The topics of the conference sessions were: (1) Mt. Pinatubo Volcanic Dust Layer Observations; (2) Global Change/Ozone Measurements; (3) GLOBE/LAWS/LITE; (4) Mesospheric Measurements and Measurement Systems; (5) Middle Atmosphere; (6) Wind Measurements and Measurement Systems; (7) Imaging and Ranging; (8) Water Vapor Measurements; (9) Systems and Facilities; and (10) Laser Devices and Technology. This conference reflects the breadth of research activities being conducted in the lidar field. These abstracts address subjects from lidar-based atmospheric investigations relating to global change to the development of new lidar systems and technology

Third DOE natural phenomena hazards mitigation conference

International Nuclear Information System (INIS)

1991-01-01

This conference on Natural Phenomena Hazards Mitigation has been organized into 15 presentation, panel, and poster sessions. The sessions included an overview of activities at DOE Headquarters; natural phenomena hazards tasks underway for DOE; two sessions on codes, standards, orders, criteria, and guidelines; two sessions on seismic hazards; equipment qualification; wind; PRA and margin assessments; modifications, retrofit, and restart; underground structures with a panel discussion; seismic analysis; seismic evaluation and design; and a poster session. Individual projects are processed separately for the data bases

Neurospora crassa ASM-1 complements the conidiation defect in a stuA mutant of Aspergillus nidulans.

Science.gov (United States)

Chung, Dawoon; Upadhyay, Srijana; Bomer, Brigitte; Wilkinson, Heather H; Ebbole, Daniel J; Shaw, Brian D

2015-01-01

Aspergillus nidulans StuA and Neurospora crassa ASM-1 are orthologous APSES (ASM-1, PHD1, SOK2, Efg1, StuA) transcription factors conserved across a diverse group of fungi. StuA and ASM-1 have roles in asexual (conidiation) and sexual (ascospore formation) development in both organisms. To address the hypothesis that the last common ancestor of these diverse fungi regulated conidiation with similar genes, asm-1 was introduced into the stuA1 mutant of A. nidulans. Expression of asm-1 complemented defective conidiophore morphology and restored conidia production to wild type levels in stuA1. Expression of asm-1 in the stuA1 strain did not rescue the defect in sexual development. When the conidiation regulator AbaA was tagged at its C-terminus with GFP in A. nidulans, it localized to nuclei in phialides. When expressed in the stuA1 mutant, AbaA::GFP localized to nuclei in conidiophores but no longer was confined to phialides, suggesting that expression of AbaA in specific cell types of the conidiophore was conditioned by StuA. Our data suggest that the function in conidiation of StuA and ASM-1 is conserved and support the view that, despite the great morphological and ontogenic diversity of their condiphores, the last common ancestor of A. nidulans and N. crassa produced an ortholog of StuA that was involved in conidiophore development. © 2015 by The Mycological Society of America.

The radioactive waste management conference

International Nuclear Information System (INIS)

Fareeduddin, S.; Hirling, J.

1983-01-01

The international conference on radioactive waste management was held in Seattle, Washington, from 16 to 20 May 1983. The response was gratifying, reflecting world-wide interest: it was attended by 528 participants from 29 Member States of the IAEA and eight international organizations. The conference programme was structured to permit reviews and presentation of up-to-date information on five major topics: - waste management policy and its implementation: national and international approaches; legal, economic, environmental, and social aspects (four sessions with 27 papers from 16 countries and four international organizations); - handling, treatment, and conditioning of wastes from nuclear facilities, nuclear power plants and reprocessing plants, including the handling and treatment of gaseous wastes and wastes of specific types (five sessions with 35 papers); - storage and underground disposal of radioactive wastes: general, national concepts, underground laboratories, and designs of repositories for high-level, and low- and intermediate-level waste disposal (five sessions with 35 papers); - environmental and safety assessment of waste management systems: goals methodologies, assessments for geological repositories, low- and intermediate-level wastes, and mill tailings (four sessions with 26 papers); - radioactive releases to the environment from nuclear operations: status and perspectives, environmental transport processes, and control of radioactive waste disposal into the environment (three sessions with 23 papers)

DOE model conference on waste management and environmental restoration

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

Reports dealing with current topics in waste management and environmental restoration were presented at this conference in six sessions. Session 1 covered the Hot Topics'' including regulations and risk assessment. Session 2 dealt with waste reduction and minimization; session 3 dealt with waste treatment and disposal. Session 4 covered site characterization and analysis. Environmental restoration and associated technologies wee discussed in session 5 and 6. Individual papers have been cataloged separately.

Inservice inspection procedures and training according to the ASME code

International Nuclear Information System (INIS)

Greenwald, S.M.; Chockie, L.J.

1987-01-01

Mandatory training of the technical staff at a nuclear power plant is of paramount importance if we are to avoid costly plant shutdowns. This training should include the requirements for both Preservice and Inservice Inspection, in addition to Quality Assurance procedures as required by the American Society of Mechanical Engineers (ASME) Code. The training is best accomplished by utilizing instructors who are thoroughly familiar with plant operations and the ASME Code, as well as serving on one of the Code committees. This paper focuses on the Inservice Inspection procedures and the results of an intensive training effort to implement such procedures. (author)

Corticosteroids reduce IL-6 in ASM cells via up-regulation of MKP-1.

Science.gov (United States)

Quante, Timo; Ng, Yee Ching; Ramsay, Emma E; Henness, Sheridan; Allen, Jodi C; Parmentier, Johannes; Ge, Qi; Ammit, Alaina J

2008-08-01

The mechanisms by which corticosteroids reduce airway inflammation are not completely understood. Traditionally, corticosteroids were thought to inhibit cytokines exclusively at the transcriptional level. Our recent evidence, obtained in airway smooth muscle (ASM), no longer supports this view. We have found that corticosteroids do not act at the transcriptional level to reduce TNF-alpha-induced IL-6 gene expression. Rather, corticosteroids inhibit TNF-alpha-induced IL-6 secretion by reducing the stability of the IL-6 mRNA transcript. TNF-alpha-induced IL-6 mRNA decays at a significantly faster rate in ASM cells pretreated with the corticosteroid dexamethasone (t(1/2) = 2.4 h), compared to vehicle (t(1/2) = 9.0 h; P ASM cells.

8th Swiss National Photovoltaics Congress. Conference proceedings

International Nuclear Information System (INIS)

Nowak, S.

2010-01-01

These congress proceedings contain the presentations made at the two-day 8 th Swiss National Photovoltaics Conference held in Winterthur, Switzerland, in February 2010. The presentations were grouped into six sessions. The first session dealt with promotional activities for photovoltaics (PV) in Switzerland. The presentations dealt with the present state of PV promotion, the cantonal support program in Basle and the Swiss photovoltaics market in a global context. The session was rounded off with a podium discussion on the Swiss cost-covering remuneration system for solar power. This theme was looked at in more detail in the second session of the conference; successes and hindrances in the system were discussed as well as an example of an alternative solar power 'exchange'. The third session looked at building-integration of PV systems; facade and roof integration and the use of flexible solar cells were discussed. The second day of the conference featured three further sessions. The first session dealt with transfer of know-how from research institutes to industry. A general overview was presented and specific examples of successful know-how transfer were reported on. The next session dealt with the great challenges presented by the efforts being made to expand the use of PV. Safety aspects were discussed, as were the certified testing of modules, mains integration and the training of personnel involved with the implementation of PV systems. The final session looked at the scenarios, perspectives and visions for Swiss and European PV business. PV systems were examined from the point of view of the semiconductor business, European energy planning, the role of PV in future energy supply and the roles of customers, investors and politics on the way to a renewable future.

The ASME research task force on risk-based in-service inspection

International Nuclear Information System (INIS)

Balkey, K.R.; Chapman, O.J.V.

1997-01-01

The use of risk-based methods in the development of in-service inspection (ISI) and in-service testing (IST) programs for nuclear power plant and other industrial applications has been studied for the last several years through the American Society of Mechanical Engineers Centre for Research and Technology Development (ASME 1991, 1992, 1994, 1996). The results of this work are being used as a foundation to develop specific requirements for implementation of risk-based technology in ASME Codes and Standards, regulatory requirements and industry programs both in the U.S. and other countries. This paper provides a brief overview of the ASME Research Methodology and how it has been adapted for application to the inspection of piping within the USA. It also relates how the reliability of nondestructive examination (NDE) methods for pressure boundary components can impact the risk and discusses the relationship between this and NDE qualification/demonstration now being implemented in Europe and the USA. (orig.)

CONFERENCE: Nuclear visions

International Nuclear Information System (INIS)

Anon.

1986-01-01

Last summer, four hundred visitors of about 30 different nationalities descended on the ancient town of Visby on the Swedish island of Gotland for the Second International Conference on Nucleus-Nucleus Collisions. For the conference itself, sessions were organized not according to conventional topics like low, intermediate and high energy reactions, but along phenomena-related lines that brought listeners together instead of splitting them up. Examples were 'phase transitions', 'new facilities' and 'breaking nuclear matter into pieces'

Third International Conference on Nuclear Knowledge Management: Challenges and Approaches. Programme and Book of Abstracts

International Nuclear Information System (INIS)

2016-01-01

Appropriate technical expertise and experience, along with a strong safety culture, must be developed and kept available throughout the nuclear technology life cycle. Nuclear equipment, installations and facilities may have long life cycles with changing operational conditions. Advanced and specialized knowledge in nuclear engineering and science is required for the safe and effective design, construction, licensing, commissioning, operation, maintenance, and decommissioning of nuclear technology-based systems. The safe use of licensed nuclear facilities and technologies is reliant on the ongoing availability and maintenance of suitable knowledge and expertise, and an adequate understanding of related safety issues. The ability of organizations that operate or utilize nuclear technology to take safe decisions and actions can be affected by knowledge gaps or knowledge loss. Appropriate methods and supporting technology are needed to establish and manage nuclear competencies, information and records, work processes, analysis and verification techniques, and the interpretation of data. Through the presentation and discussion of issues and solutions related to building, collecting, transferring, sharing, maintaining, preserving and utilizing knowledge, the conference will aim to improve awareness of the importance of knowledge management (KM) in the nuclear sector. Member States will have the opportunity to strengthen their capabilities in this area by learning from the experiences of other Member States and other stakeholders. The conference is a follow-up to the first and second conferences organized by the IAEA on nuclear knowledge management (NKM), held in 2004 in Saclay, France (Proceedings in PDF), and in 2007 in Vienna, Austria (Web Archive), respectively. It also builds on the outcomes of the IAEA organized conferences on human resource development held in 2010 in Abu Dhabi, United Arab Emirates (Proceedings website), and in 2014 in Vienna, Austria (Web Archive

2. National scientific conference on process engineering in environment protection. Conference materials; 2. Ogolnopolska konferencja naukowa ``inzynieria procesowa w ochronie srodowiska``. Materialy konferencyjne

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The national conference on `Process engineering in environment protection` Jachranka 1994 has been divided into three sessions. Section 1 has been devoted to flue gas purification and collects 13 papers. Section 2 on liquid purification gathered 8 presentation. Section 3 - the poster session with 12 posters on related topics. During the conference 2 lectures and 3 posters have been devoted to the application of nuclear techniques to the solution different problems connected with environment protection.

2011 annual meeting on nuclear technology. Pt. 4. Topical sessions

International Nuclear Information System (INIS)

Schoenfelder, Christian; Dams, Wolfgang

2011-01-01

Summary report on the Topical Session of the Annual Conference on Nuclear Technology held in Berlin, 17 to 19 May 2011: - Nuclear Competence in Germany and Europe. The Topical Session: - Sodium Cooled Fast Reactors -- will be covered in a report in a further issue of atw. The reports on the Topical Sessions: - CFD-Simulations for Safety Relevant Tasks; and - Final Disposal: From Scientific Basis to Application; - Characteristics of a High Reliability Organization (HRO) Considering Experience Gained from Events at Nuclear Power Stations -- have been covered in atw 7, 8/9, and 10 (2011). (orig.)

Proceedings of the 44. annual Ontario Petroleum Institute's oil and gas conference

International Nuclear Information System (INIS)

2005-01-01

This annual conference focused on developments related to the Ontario Petroleum industry. Issues concerning hydrocarbon potential were examined as well as geological information related to oil and gas activities in the region. The conference was divided into 6 sessions. Session 1 provided updates on employment issues in Ontario's oil and gas industry with respect to regulations and staffing as well as an update of issues concerning the geosciences profession in the province. Session 2 examined approaches to predictive geochemistry for buried gas and oil targets. Session 3 presented a comparison of Cambrian reservoir rocks as well as details of a natural channel realignment project. Session 4 presented details of new renewable technologies for the Ontario petroleum industry as well as a regional stratigraphic synthesis for the Paleozoic of southern Ontario. Session 5 provided a primer on tax rules, workers industry needs and an update on training delivery. Session 6 examined approaches to contaminant control. A study of hydrodynamics at the ice-bed interface was also presented. The conference featured 13 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs

Proceedings: 2001 ASME/EPRI Radwaste Workshop

International Nuclear Information System (INIS)

2001-01-01

Nuclear utilities continually evaluate methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has increased the emphasis on this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technology and management improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

INC93: international nuclear congress. Technical sessions summaries

International Nuclear Information System (INIS)

Boulton, J.

1993-01-01

The conference dealt mainly with safety, environmental and human aspects of nuclear energy, including waste management. This volume consists of summaries of the technical sessions contained in Volumes 2 and 3. The individual papers have also been abstracted separately for INIS, with the summaries abridged

INC93: international nuclear congress. Technical sessions summaries

Energy Technology Data Exchange (ETDEWEB)

Boulton, J

1994-12-31

The conference dealt mainly with safety, environmental and human aspects of nuclear energy, including waste management. This volume consists of summaries of the technical sessions contained in Volumes 2 and 3. The individual papers have also been abstracted separately for INIS, with the summaries abridged.

ITER ITA newsletter. No. 18, October-November-December 2004

International Nuclear Information System (INIS)

2004-12-01

This issue of ITER ITA (ITER Transitional Arrangements) newsletter contains concise information about ITER related meetings, namely, the fourth preparatory meeting for ITER decision making, which was held at the IAEA Headquarters in Vienna on 9 November 2004 and the 20th IAEA Fusion Energy Conference, which was held on 1-6 November 2004 in Vilamoura, Portugal

Revision of the ASME nuclear quality assurance standard and its historical background

International Nuclear Information System (INIS)

Suzuki, Tetsuya

2009-01-01

ASME NQA-1-2008 'Quality Assurance Requirements for Nuclear Facility Applications' will be endorsed by US NRC by the end of 2009. This standard will apply to design, construction and operation of nuclear power plants newly erected in USA. It is important to Japanese vendors developing nuclear business in USA. Historical background, significance of revision and main revised points of the ASME nuclear quality assurance standard are described in the present paper. (T. Tanaka)

5th International Conference on Atmospheric Electricity

CERN Document Server

Reiter, Reinhold; Landsberg, Helmut

1976-01-01

These Proceedings are published to give a full account of the Fifth International Conference on Atmospheric Electricity held in September 1974 in Garmisch-Partenkirchen in the Bavarian Alps in Germany. Traditionally, the Proceedings of these Conferences have served as reference books updating the textbooks and monographs on Atmospheric Electricity. As treated by these Conferences, Atmos­ pheric Electricity covers all aspects of this science, including the processes and problems which reach out into the Earth's environment as well as analogous processes on other planets and on the Moon. A history of these Conferences, an account of their purpose, and an outline of the scope and the preparation is to be found at the end of these Proceedings. There, also the Business Meetings of the involved organizations are mentioned. The Proceedings closely follow the original program and are accordingly organized into "Sessions". The papers printed in each "Session" in this book are the ones which were accepted for the sess...

Cyclin D1 in ASM Cells from Asthmatics Is Insensitive to Corticosteroid Inhibition.

Science.gov (United States)

Allen, Jodi C; Seidel, Petra; Schlosser, Tobias; Ramsay, Emma E; Ge, Qi; Ammit, Alaina J

2012-01-01

Hyperplasia of airway smooth muscle (ASM) is a feature of the remodelled airway in asthmatics. We examined the antiproliferative effectiveness of the corticosteroid dexamethasone on expression of the key regulator of G(1) cell cycle progression-cyclin D1-in ASM cells from nonasthmatics and asthmatics stimulated with the mitogen platelet-derived growth factor BB. While cyclin D1 mRNA and protein expression were repressed in cells from nonasthmatics in contrast, cyclin D1 expression in asthmatics was resistant to inhibition by dexamethasone. This was independent of a repressive effect on glucocorticoid receptor translocation. Our results corroborate evidence demonstrating that corticosteroids inhibit mitogen-induced proliferation only in ASM cells from subjects without asthma and suggest that there are corticosteroid-insensitive proliferative pathways in asthmatics.

Proceedings: 2000 ASME/EPRI Radwaste Workshop

International Nuclear Information System (INIS)

2001-01-01

Nuclear utilities are continually evaluating methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has added increased emphasis to this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technological and managerial improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

Resume and discussion of session on direct heavy ion reactions

International Nuclear Information System (INIS)

Hansen, O.

1983-01-01

A conference divides into sessions, but the physics does not always respect such divisions. I found the subject of barrier penetrabilities viewed in a coupled channels picture new, exciting and central to all heavy-ion reaction dynamics. The subject was discussed in bits and pieces over three different sessions, partly in the talks by Winther, Landowne, Braun-Munzinger and Broglia, and partly from the floor by the same people and by Smilanski, I have concentrated on that subject alone and I therefore must apologize to the speakers in my session who covered different material, that definitely merited further discussions. Also, I apologize to other session chairmen, whose territory I have invaded. (orig.)

Rethinking ASME III seismic analysis for piping operability evaluations

International Nuclear Information System (INIS)

Adams, T.M.; Stevenson, J.D.

1994-01-01

It has been recognized since the mid 1980's that there are very large seismic margins to failure for nuclear piping systems when designed using current industry practice, design criteria, and methods. As a result of this realization there are or have been approximately eighteen initiatives within the ASME , Boiler and Pressure Vessel Code Section III, Division 1, in the form of proposed code cases and proposed code text changes designed to reduce these failure margins to more realistic values. For the most part these initiatives have concentrated on reclassifying seismic inertia stresses in the piping as secondary and increasing the allowable stress limits permitted by Section III of the ASME, Boiler Code. This paper focuses on the application of non-linear spectral analysis methods as a method to reduce the input seismic demand determination and thereby reduce the seismic failure margins. The approach is evaluated using the ASME Boiler Pressure Vessel Code Section III Subgroup on Design benchmark procedure as proposed by the Subgroup's Special Task Group on Integrated Piping Criteria. Using this procedure, criteria are compared to current code criterion and analysis methods, and several other of the currently proposed Boiler and Pressure Vessel, Section III, changes. Finally, the applicability of the non-linear spectral analysis to continued Safe Operation Evaluations is reviewed and discussed

2010 Tetrapyrroles, Chemistry & Biology of Gordon Research Conference

Energy Technology Data Exchange (ETDEWEB)

Angela Wilks

2010-07-30

The objective of the Chemistry & Biology of Tetrapyrroles Gordon Conference is to bring together researchers from diverse disciplines that otherwise would not interact. By bringing biologists, chemists, engineers and clinicians with a common interest in tetrapyrroles the conference provides a forum for cross-disciplinary ideas and collaboration. The perspective provided by biologists, chemists, and clinicians working in fields such as newly discovered defects in human porphyrin metabolism, the myriad of strategies for light harvesting in photosynthetic organisms, novel tetrapyrroles that serve as auxiliary chromophores or enzyme cofactors, synthetic strategies in the design of novel tetrapyrrole scaffolds, and tetrapyrrole based cell signaling and regulatory systems, makes this conference unique in the field. Over the years the growing evidence for the role of tetrapyrroles and their reactive intermediates in cell signaling and regulation has been of increasing importance at this conference. The 2010 conference on Chemistry & Biology of Tetrapyrroles will focus on many of these new frontiers as outlined in the preliminary program listed. Speakers will emphasize unpublished results and new findings in the field. The oral sessions will be followed by the highly interactive afternoon poster sessions. The poster sessions provide all conferees with the opportunity to present their latest research and to exchange ideas in a more informal setting. As in the past, this opportunity will continue during the nightly social gathering that takes place in the poster hall following the evening lectures. All conferees are encouraged to submit and present posters. At the conference the best poster in the areas of biology, chemistry and medicine will be selected by a panel of previous conference chairs.

Nuclear energy: a world of service to humanity. 27th annual conference of the Canadian Nuclear Society and 30th Canadian Nuclear Society/Canadian Nuclear Association student conference

International Nuclear Information System (INIS)

2006-01-01

The 27th Annual conference of the Canadian Nuclear Society was held on June 11-14, 2006 in Toronto, Ontario, Canada. The conference gathered close to 400 scientists, engineers, technologists and students interested in all aspects and applications of energy from the atom. The central objective of this conference was to provide a forum for exchange of views on how this technical enterprise can best serve the needs of humanity, now and in the future. The plenary sessions addressed broad industrial and commercial developments in the field. Over eighty papers were presented in 15 technical sessions on the following topics: safety analysis; plant refurbishment; control room operation; nuclear chemistry and materials; advanced reactor design; plant operation; reactor physics; safety analysis; nuclear instrumentation; and, nuclear general topics. Embedded in the conference was the 30th student conference, sponsored by the Canadian Nuclear Society and the Canadian Nuclear Association. Over thirty-five papers were presented in five sessions on the following topics: corrosion processes; control systems / physics / modelling; and, chemistry / chemical engineering

PREFACE: International Conference on Strongly Correlated Electron Systems 2014 (SCES2014)

Science.gov (United States)

2015-03-01

The 2014 International Conference on Strongly Correlated Electron Systems (SCES) was held in Grenoble from the 7th to 11th of July on the campus of the University of Grenoble. It was a great privilege to have the conference in Grenoble after the series of meetings in Sendai (1992), San Diego (1993), Amsterdam (1994), Goa (1995), Zürich (1996), Paris (1998), Nagano (1999), Ann Arbor (2001), Krakow (2002), Karlsruhe (2004), Vienna (2005), Houston (2007), Buzios (2008), Santa Fe (2010), Cambridge (2011) and Tokyo (2013). Every three years, SCES joins the triennial conference on magnetism ICM. In 2015, ICM will take place in Barcelona. The meeting gathered an audience of 875 participants who actively interacted inside and outside of conference rooms. A large number of posters (530) was balanced with four parallel oral sessions which included 86 invited speakers and 141 short oral contributions. A useful arrangement was the possibility to put poster presentations on the website so participants could see them all through the conference week. Each morning two plenary sessions were held, ending on Friday with experimental and theoretical summaries delivered by Philipp Gegenwart (Augsburg) and Andrew Millis (Columbia). The plenary sessions were given by Gabriel Kotliar (Rutgers), Masashi Kawasaki (Tokyo), Jennifer Hoffman (Harvard), Mathias Vojta (Dresden), Ashvin Vishwanath (Berkeley), Andrea Cavalleri (Hamburg), Marc-Henri Julien (Grenoble), Neil Mathur (Cambridge), Giniyat Khaliullin (Stuttgart), and Toshiro Sakakibara (Tokyo). The parallel oral sessions were prepared by 40 symposium organizers selected by the chairman (Antoine Georges) and co-chairman (Kamran Behnia) of the Program Committee with the supplementary rule that speakers had not delivered an invited talk at the previous SCES conference held in 2013 in Tokyo. Special attention was given to help young researchers via grants to 40 overseas students. Perhaps due to the additional possibility of cheap

Proceedings of the 2004 symposium on nuclear data

International Nuclear Information System (INIS)

Tahara, Yoshihisa; Fukahori, Tokio

2005-03-01

The 2004 Symposium on Nuclear Data was held at Tokai Research Establishment, Japan Atomic Energy Research Institute (JAERI), on 11th and 12th of November 2004. Japanese Nuclear Data Committee and Nuclear Data Center, JAERI organized this symposium. In the oral sessions, presented were 19 papers on topics of nuclear data for LWR and nuclear fuel cycle, nuclear data for ADS development, experiences from use of JENDL-3.3 and requests to JENDL-4, recent cross section measurements, nuclear data for life and material sciences, and nuclear data needs and activities in the World. In the poster session, presented were 21 papers concerning experiments, evaluations, benchmark tests, applications and so on. Those presented papers are compiled in the proceedings. The 40 of the presented papers are indexed individually. (J.P.N.)

Global Threat Reduction Initiative International Partners' Conference. Summary of the proceedings and findings of the conference

International Nuclear Information System (INIS)

2004-01-01

The Global Threat Reduction Initiative (GTRI) International Partners' Conference took place in Vienna, Austria, from September 18-19, 2004. More than 590 representatives from 100 International Atomic Energy Agency (IAEA) Member States attended the GTRI International Partners' Conference on September 18-19, 2004, in Vienna, Austria. Representatives from ten non-governmental and international organizations were also present during the conference. The Governments of the United States and the Russian Federation co-sponsored the International Partners Conference, with support from the International Atomic Energy Agency. The purpose of the International Partners' Conference was to build and broaden international support for efforts by national authorities to identify, secure, recover, and/or facilitate the disposition of high-risk nuclear and radioactive materials that pose a potential threat to the international community. One of the significant outcomes of the International Partners Conference was reaching agreement on the Findings of the Conference (enclosed in this document) by participating Member States that outlined a broadly shared opinion of participating Member States on efforts to reduce the potential threat posed by vulnerable, unsecured nuclear and other radioactive material. It is hoped that this document can be used as a framework to consolidate, expand, and accelerate domestic, regional, and IAEA programs that address unsecured vulnerable nuclear and radioactive materials, as deemed necessary by Member States. As a first step, participating members states urged the international community to note additional opportunities to further build support for activities related to GTRI

Session Introduction

Science.gov (United States)

Eliane Lessner, Co-Chair:

2009-03-01

A panel discussion session providing a worldwide assessment of the status and experiences of women in physics, paying attention to the different cultures and environments they work in and to how the age of the physicist affects their perspective. We will hear about women physicists in Korea in particular and Asia in general, in Egypt in particular and Africa in general, and in the Caribbean. Six invited speakers will present analyses of the progress being made in promoting women in physics from their personal experiences and as assessed from their participation in the Third International Conference on Women In Physics (ICWIP2008) convened in Seoul, Korea in October 2008. From Albania to Zimbabwe, with representation of all the continents, ICWIP2008 congregated 283 women and men physicists from 57 countries to share the participants' scientific accomplishments and evaluate international progress in improving the status of women in physics. This three-hour session is organized jointly by the Committee on the Status of Women in Physics of the APS (CSWP) and the Forum on International Physics of the APS (FIP). Audience participation in the panel discussion will be strongly encouraged.

Session 31B - Panel: Opportunities in the UK with the Nuclear Decommissioning Authority (NDA)

International Nuclear Information System (INIS)

Benda, Gary; Hayes, David; Gorham, Ron; Wareing, Mark; Simper, Adrian; Selby, Terry

2006-01-01

The NDA participated in a panel session 31B on Wednesday afternoon starting at 3:15. The NDA is a non-departmental public body, set up in April 2005 under the Energy Act 2004 to take strategic responsibility for the UK's nuclear legacy. Details of their organization and history are located on their web site at www.nda.gov.uk. Also copies of their Power Point presentations made at WM'06 are available on their web site. Their core objective is to ensure that the 20 civil public sector nuclear sites under our ownership are decommissioned and cleaned up safely, securely, cost effectively and in ways that protect the environment for this and future generations. They lead the development of a unified and coherent decommissioning strategy, working in partnership with regulators and site licensees to achieve best value, optimum impact on local communities, and the highest environmental standards. The NDA's main task is the decommissioning and clean up of civil nuclear sites. If the Government decides it is necessary, however, the Energy Act 2004 allows the NDA to take responsibility for sites currently operated by, or on behalf of, the Ministry of Defence (MoD). Resources will then be transferred from the MoD to meet the costs of clean up. The NDA made a number of presentations to allow conference delegates the opportunity to understand some of the major aspects of their work and to interact with NDA staff. These included the following topics and gave opportunity for audience discussion: - A brief presentation to update on progress by the NDA; - Outline of low level waste management and the prioritisation process; - Discussion of the competition schedule related to low level waste management and the Drigg site. The following presentations and handout were delivered in various sessions of the conference as noted below and are available on their web page including the WM'06 Plenary Session presentation by Sir Anthony Cleaver, Chairman of the NDA. During Session 31B, the

NANOTR9: 9th Nanoscience and Nanotechnology Conference

Science.gov (United States)

2014-11-01

The conference series NanoTR is the major conference on nanoscience and nanotechnology in Turkey. It brings together leading scientists and engineers in nanotechnology to exchange information on their latest research progress. An exhibition of the companies working in the related field is also organized as a part of the event. With intensive international participation, NanoTR conference series has spread outside the national border and has become an international event in this field. Among international contributions, a wide interest from the countries around Turkey should be emphasized. 9th in the series was organized by Atatürk University in Erzurum-Turkey on June 24-28, 2013 with more than 900 scientists, researchers, private sector representatives from around the world. Conference program included 6 plenary speakers, 35 invited speakers (18 of them were from outside the country), 116 oral presentations, and 340 poster presentations. In addition to 6 plenary sessions, 17 oral and 4 poster sessions created very lively discussion forums covering a vast range of current and emerging sciences from nano-materials, nanoscience, nanofabrication, nano-engineering, nano-electronics, nano-biotechnology, to ethical and social issues of nanoscience and nanotechnology. Also, panel discussions about industrial applications, tutorial sessions have been organized for students, new-comers and company employees.

Interaction between endoplasmic/sarcoplasmic reticulum stress (ER/SR stress), mitochondrial signaling and Ca(2+) regulation in airway smooth muscle (ASM).

Science.gov (United States)

Delmotte, Philippe; Sieck, Gary C

2015-02-01

Airway inflammation is a key aspect of diseases such as asthma. Several inflammatory cytokines (e.g., TNFα and IL-13) increase cytosolic Ca(2+) ([Ca(2+)]cyt) responses to agonist stimulation and Ca(2+) sensitivity of force generation, thereby enhancing airway smooth muscle (ASM) contractility (hyper-reactive state). Inflammation also induces ASM proliferation and remodeling (synthetic state). In normal ASM, the transient elevation of [Ca(2+)]cyt induced by agonists leads to a transient increase in mitochondrial Ca(2+) ([Ca(2+)]mito) that may be important in matching ATP production with ATP consumption. In human ASM (hASM) exposed to TNFα and IL-13, the transient increase in [Ca(2+)]mito is blunted despite enhanced [Ca(2+)]cyt responses. We also found that TNFα and IL-13 induce reactive oxidant species (ROS) formation and endoplasmic/sarcoplasmic reticulum (ER/SR) stress (unfolded protein response) in hASM. ER/SR stress in hASM is associated with disruption of mitochondrial coupling with the ER/SR membrane, which relates to reduced mitofusin 2 (Mfn2) expression. Thus, in hASM it appears that TNFα and IL-13 result in ROS formation leading to ER/SR stress, reduced Mfn2 expression, disruption of mitochondrion-ER/SR coupling, decreased mitochondrial Ca(2+) buffering, mitochondrial fragmentation, and increased cell proliferation.

The quantitative study of marked individuals in ecology, evolution and conservation biology: a foreword to the EURING 2003 Conference

Directory of Open Access Journals (Sweden)

Senar, J. C.

2004-06-01

each introduction to appear as a short paper in the front of each one of the sessions, so that it can be cited as a regular paper. The Proceedings start with the Honour Speaker Talk by James Nichols (Nichols, 2004. This talk is traditionally the last one in the Conference, but we think that it nicely summarises how and why capture-recapture has developed to its current healthy state. The talk is in fact a tribute to David Anderson, to whom, as Nichols says, all of us are more or less in debt. Hence, we have preferred to move the Honour Talk to the front position of the Proceedings, and we would like this to be our humble tribute to David. At the end of the Proceedings appear a few papers which were presented in poster format, and a paper summarising several of the main topics presented at the traditional short course on capture-recapture, this time organized by the unflagging Evan Cooch. We would like to thank all the people who helped in one way or another to the successful completion of the EURING Conference and the Proceedings. We thank to the Session Chairs, their dedication and enthusiasm in organizing the sessions and also in editing the different papers. All their names appear in the front page of the Proceedings as credits. We thank Wolfgang Fiedler for the local organization of the event: a very difficult and exhausting task that is not always properly recognized. Jean Clobert, although unfortunately unable to attend the Conference, supported us with ideas and friendship meanwhile preparing the scientific program. Evan Cooch maintained the always successful web page (which probably will also become a classic in EURING conferences…, and organized the traditional course on capture-recapture. Charles Francis very efficiently organized the poster session and acted as editor for the papers sent for publication. Finally we thank the Ministerio de Ciencia y Tecnología for financial support to the publication of this special issue of Animal Biodiversity and

NCR-days 2004; research for managing rivers: present and future issues

NARCIS (Netherlands)

Makaske, B.; Os, van A.G.

2005-01-01

These proceedings are the product of the NCR days 2004, held 46 November 2004 in Wageningen.The NCR days are a yearly conference at which mainly young scientists present their ongoing research on a wide variety of fluvial subjects. The 46 contributions (oral presentations and posters) to the

Second international conference on isotopes. Conference proceedings

Energy Technology Data Exchange (ETDEWEB)

Hardy, C J [ed.

1997-10-01

The Second International Conference on Isotopes (2ICI) was hosted by the Australian Nuclear Association in Sydney, NSW, Australia. The Theme of the Second Conference: Isotopes for Industry, Health and a Better Environment recognizes that isotopes have been used in these fields successfully for many years and offer prospects for increasing use in the future. The worldwide interest in the use of research reactors and accelerators and in applications of stable and radioactive isotopes, isotopic techniques and radiation in industry, agriculture, medicine, environmental studies and research in general, was considered. Other radiation issues including radiation protection and safety were also addressed. International and national overviews and subject reviews invited from leading experts were included to introduce the program of technical sessions. The invited papers were supported by contributions accepted from participants for oral and poster presentation. A Technical Exhibition was held in association with the Conference. This volume contains the full text or extended abstracts of papers number 61- to number 114

Roles of the Outer Membrane Protein AsmA of Salmonella enterica in the Control of marRAB Expression and Invasion of Epithelial Cells▿

OpenAIRE

Prieto, Ana I.; Hernández, Sara B.; Cota, Ignacio; Pucciarelli, M. Graciela; Orlov, Yuri; Ramos-Morales, Francisco; García-del Portillo, Francisco; Casadesús, Josep

2009-01-01

A genetic screen for suppressors of bile sensitivity in DNA adenine methylase (dam) mutants of Salmonella enterica serovar Typhimurium yielded insertions in an uncharacterized locus homologous to the Escherichia coli asmA gene. Disruption of asmA suppressed bile sensitivity also in phoP and wec mutants of S. enterica and increased the MIC of sodium deoxycholate for the parental strain ATCC 14028. Increased levels of marA mRNA were found in asmA, asmA dam, asmA phoP, and asmA wec strains of S....

ECED 2013: Eastern and Central Europe Decommissioning. International Conference on Decommissioning of Nuclear Facilities. Conference Guide and Book of Abstracts

International Nuclear Information System (INIS)

2013-01-01

The Conference included the following sessions: (I) Opening session (2 contributions); (II) Managerial and Funding Aspects of Decommissioning (5 contributions); (III) Technical Aspects of Decommissioning I (6 contributions); (IV) Experience with Present Decommissioning Projects (4 contributions); (V) Poster Session (14 contributions); (VI) Eastern and Central Europe Decommissioning - Panel Discussion; (VII) Release of Materials, Waste Management and Spent Fuel Management (6 contributions); (VIII) Technical Aspects of Decommissioning II (5 contributions).

6th International Conference on Paleoceanography

CERN Document Server

Mix, Alan

1999-01-01

This volume is one outcome of the 6th International Conference on Paleoceano­ graphy (ICP VI). The conference was held August 23-28, 1998 in Lisbon, Portugal. The meeting followed the traditional format of a small number of invited oral presentations complemented by a large number ofcontributed posters. Over 550 participants attended, representing thirty countries and nearly 450 posters were presented. The invited speakers addressed the main themes of the 5oral sessions. The session topics were: Polar-Tropical and Interhemisphere Linkages; Does the Ocean Cause, or Respond to, Abrupt Climatic Changes?; Biotic Responses to Major Paleoceanographic Changes; Past Warm Climates; and Innovations In Monitoring Ocean History. This is the first time in ICP history that the Conference Proceedings are published. The aim of the organisers with the publication of this book is two-fold: to provide a useful review of the field and to document the ideas/controversies raised during the con­ ference that may stimulate future ...

Proceedings: Cooling tower and advanced cooling systems conference

International Nuclear Information System (INIS)

1995-02-01

This Cooling Tower and Advanced Cooling Systems Conference was held August 30 through September 1, 1994, in St. Petersburg, Florida. The conference was sponsored by the Electric Power Research Institute (EPRI) and hosted by Florida Power Corporation to bring together utility representatives, manufacturers, researchers, and consultants. Nineteen technical papers were presented in four sessions. These sessions were devoted to the following topics: cooling tower upgrades and retrofits, cooling tower performance, cooling tower fouling, and dry and hybrid systems. On the final day, panel discussions addressed current issues in cooling tower operation and maintenance as well as research and technology needs for power plant cooling. More than 100 people attended the conference. This report contains the technical papers presented at the conference. Of the 19 papers, five concern cooling tower upgrades and retrofits, five to cooling tower performance, four discuss cooling tower fouling, and five describe dry and hybrid cooling systems. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Adaptive and active materials: selected papers from the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 12) (Stone Mountain, GA, USA, 19-21 September 2012)

Science.gov (United States)

Seelecke, Stefan; Erturk, Alper; Ounaies, Zoubeida; Naguib, Hani; Huber, John; Turner, Travis; Anderson, Iain; Philen, Michael; Baba Sundaresan, Vishnu

2013-09-01

The fifth annual meeting of the ASME/AIAA Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) was held in beautiful Stone Mountain near Atlanta, GA. It is the conference's objective to provide an up-to-date overview of research trends in the entire field of smart materials systems. This was reflected in keynote speeches by Professor Eduard Arzt (Institute of New Materials and Saarland University, Saarbrücken, Germany) on 'Micro-patterned artificial 'Gecko' surfaces: a path to switchable adhesive function', by Professor Ray H Baughman (The Alan G MacDiarmid NanoTech Institute, University of Texas at Dallas) on 'The diverse and growing family of carbon nanotube and related artificial muscles', and by Professor Richard James (University of Minnesota) on 'The direct conversion of heat to electricity using multiferroic materials with phase transformations'. SMASIS 2012 was divided into eight symposia which span basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations. • SYMP 1. Development and characterization of multifunctional materials. • SYMP 2. Mechanics and behavior of active materials. • SYMP 3. Modeling, simulation and control of adaptive systems. • SYMP 4. Integrated system design and implementation. • SYMP 5. Structural health monitoring/NDE. • SYMP 6. Bio-inspired materials and systems. • SYMP 7. Energy harvesting. • SYMP 8. Structural and materials logic. This year we were particularly excited to introduce a new symposium on energy harvesting, which has quickly matured from a special track in previous years to an independent symposium for the first time. The subject cuts across fields by studying different materials, ranging from piezoelectrics to electroactive polymers, as well as by emphasizing different energy sources from wind to waves and ambient vibrations. Modeling, experimental studies, and technology applications all

Collins Center Update. Volume 6, Issue 4, July-September 2004

National Research Council Canada - National Science Library

Kratman, Thomas P; Thompson, Eugene L; Butts, Kent H; Turner, Curtis; Kievit, James

2004-01-01

The Rule of Law: Foundation of Civilization, Special Operations Forces Annual Education Conference 2004, Trilateral Strategic Defense Capability Planning Symposium, Ballistic Missile Defense System Exercise...

2010 Gordon Research Conference, Electrochemistry, January 9-15, 2010

Energy Technology Data Exchange (ETDEWEB)

Creager, Stephen [Clemson Univ., SC (United States)

2010-12-31

Electrochemical science plays a crucial role in many important technologies and is intimately involved in many natural phenomena. Several new Gordon Research Conferences have appeared recently that are dedicated to electrochemical technologies, however electrochemistry as a discipline continues to thrive and provide the underpinnings of these technologies. The 2010 Electrochemistry GRC will focus on a wide range of fundamental electrochemical phenomena and materials and on their application in areas involving energy storage, information storage, chemical analysis, and motion actuation. The meeting will include sessions dedicated to the following specific topics: electrochemical energy storage (e.g. batteries; at least two sessions); electrochemical motion actuation (e.g. electrokinesis); electrocatalysis; electrochemistry in digital information storage; and bioelectrochemistry (including bioanalysis). An Open Session devoted to highlighting the activities of {approx}10 young investigators and non-North American visitors via brief 10-minute talks, and two open poster sessions highlighting the contributions of approximately 60 conference participants including graduate students, will be held. Altogether the conference is expected to include approximately 90 presentations. As has been the case in the recent past, the meeting will bring together participants from academia, national labs, and the private sector, including senior and junior-level scientists, postdoctoral scientists, and graduate students for informal interactions and exchange of ideas. An affiliated Gordon-Kenan Research Seminar (GRS) will also be held with the conference. Special efforts will be made to invite participation from members of underrepresented groups.

Fifth French-German Conference on Optimization

CERN Document Server

1989-01-01

The 2-yearly French-German Conferences on Optimization review the state-of-the-art and the trends in the field. The proceedings of the Fifth Conference include papers on projective methods in linear programming (special session at the conference), nonsmooth optimization, two-level optimization, multiobjective optimization, partial inverse method, variational convergence, Newton type algorithms and flows and on practical applications of optimization. A. Ioffe and J.-Ph. Vial have contributed survey papers on, respectively second order optimality conditions and projective methods in linear programming.

7th European Thermal-Sciences Conference (Eurotherm2016)

International Nuclear Information System (INIS)

2016-01-01

This Conference Volume contains the papers presented at the seventh European Thermal-Sciences Conference (EUROTHRERM 2016) held in Krakow, Poland from 19-23 June 2016 and accepted for Proceedings published in the Journal of Physics: Conference Series. The European Thermal-Sciences Conferences have been taking place since 1992, a full twenty four years. This year's follows successful conferences in Birmingham (1992, 2004), Rome (1996), Heidelberg (2000), Eindhoven (2008), Poitiers - Futuroscope (2012). The seventh European Thermal-Sciences Conference is being organized under the auspices of the EUROTHERM Committee. The goal of this conference is to provide a forum for the exposure and exchange of ideas, methods and results in heat transfer, fluid mechanics and thermodynamics. Conference topics include, but are not limited to: Fundamentals: Heat and Mass Transfer, Fluid Mechanics, Thermodynamic Processes, Measurement Techniques, Numerical Methods including: adsorption and desorption, boiling and evaporation, combustion, computational/numerical methods, condensation, conduction, convection, electrochemical transport, jets, mass transfer and drying, measurement techniques, micro-/nano-scale heat transfer, molecular transport, MHD and plasma, optimal control/theory, phase change, porous media, radiation, solidification, thermal - solar energy, turbulent transport, two-phase/multiphase flows, Applications: Aerospace Technology, Advanced Energy Systems, Advanced Environmental Systems, Biotechnology and Medical Engineering, Cryogenics, Education, Heat Exchangers, Interactive Computational and Experimental Methodologies, Inverse Problems, Manufacturing Processes, Material Processing, Micro-Electro-Mechanical Systems, Miniaturized Systems for Chemistry and Life Sciences, Miscellaneous, Nanotechnology. Within the general subjects of this conference the mini-symposium and special sessions are organized. The topics include: Clean Coal and Gas Technologies, Fuel Cell

PO23 - Behavioural therapy via a video conference

DEFF Research Database (Denmark)

Grejsen, Judy; Aaslet, Lone; Debes, Nanette Marinette Monique Mol

2016-01-01

UNLABELLED: Theme: Therapy and technology Methods: Since December 2014, 10 patients have participated and finished the therapy. The first and last session took place at the Tourette clinic and sessions 2-11 were offered via video conference. Before and after BT, Yale Global Tics Severity Scale...... and PedsQl (Quality of Life) were used to assess the effectiveness of BT. We compared these patients with 10 patients with traditional BT. RESULTS: Both in the group with video conference BT and in the group with traditional BT, we found a decrease in motor, vocal, and total tics and global severity score...

Microgravity Materials Science Conference 2000. Volume 1

Science.gov (United States)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 1 of 3 of the 2000 Microgravity Material Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference. In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in materials science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was

Microgravity Materials Science Conference 2000. Volume 3

Science.gov (United States)

Ramachandran, Narayanan; Bennett, Nancy; McCauley, Dannah; Murphy, Karen; Poindexter, Samantha

2001-01-01

This is Volume 3 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close

Microgravity Materials Science Conference 2000. Volume 2

Science.gov (United States)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 2 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference %%,its to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance

Technical justification for ASME code section xi crack detection by visual examination

International Nuclear Information System (INIS)

Nickell, R.E.; Rashid, Y.R.

2001-01-01

A critical technical element of nuclear power plant license renewal in the United States is the demonstration that the effects of aging do not compromise the intended safety function(s) of a system, structure, or component during the extended term of operation. The demonstration may take either of two forms. First, it can be shown that the design basis for the system, structure, or component is sufficiently robust that the aging effects have been insignificant through the current license term, and will continue to be insignificant through the extended term. Alternatively, it can be shown that, while the aging effects may be potentially significant, those effects can be managed and functionality maintained by defined programmatic activities during the extended term of operation. The first of the two approaches is generally provided by the construction basis, such as construction in accordance with the ASME Code Section III and other consensus codes and standards. The second of the two approaches is often provided by periodic inservice inspection and testing, in accordance with the ASME Code Section XI. The purpose of the ASME Section XI inspections and tests is to assure that systems, components, and structures are fit for continued service until the next scheduled inspection or test. The purpose of this paper is to document the effectiveness of the current ASME Code Section XI visual examination procedures in detecting the effects of aging for systems, structures, and components that are tolerant of mature cracks. (author)

The APECS Virtual Poster Session: a virtual platform for science communication and discussion

Science.gov (United States)

Renner, A.; Jochum, K.; Jullion, L.; Pavlov, A.; Liggett, D.; Fugmann, G.; Baeseman, J. L.; Apecs Virtual Poster Session Working Group, T.

2011-12-01

The Virtual Poster Session (VPS) of the Association of Polar Early Career Scientists (APECS) was developed by early career scientists as an online tool for communicating and discussing science and research beyond the four walls of a conference venue. Poster sessions often are the backbone of a conference where especially early career scientists get a chance to communicate their research, discuss ideas, data, and scientific problems with their peers and senior scientists. There, they can hone their 'elevator pitch', discussion skills and presentation skills. APECS has taken the poster session one step further and created the VPS - the same idea but independent from conferences, travel, and location. All that is needed is a computer with internet access. Instead of letting their posters collect dust on the computer's hard drive, scientists can now upload them to the APECS website. There, others have the continuous opportunity to comment, give feedback and discuss the work. Currently, about 200 posters are accessible contributed by authors and co-authors from 34 countries. Since January 2010, researchers can discuss their poster with a broad international audience including fellow researchers, community members, potential colleagues and collaborators, policy makers and educators during monthly conference calls via an internet platform. Recordings of the calls are available online afterwards. Calls so far have included topical sessions on e.g. marine biology, glaciology, or social sciences, and interdisciplinary calls on Arctic sciences or polar research activities in a specific country, e.g. India or Romania. They attracted audiences of scientists at all career stages and from all continents, with on average about 15 persons participating per call. Online tools like the VPS open up new ways for creating collaborations and new research ideas and sharing different methodologies for future projects, pushing aside the boundaries of countries and nations, conferences

Analysis of a STEM Education Professional Development Conference for Pre-Service Educators

Science.gov (United States)

Hardrict-Ewing, Gloria

Science, technology, engineering, and mathematics (STEM) disciplines are attracting increased attention in education. The iSTEM 2017 conference was a professional development program designed to acquaint pre-service teachers with interdisciplinary, research-based STEM instructional strategies that can transform traditional classroom instruction into dynamic learning environments. The STEM Education Scholars (STEMES) is a Learning Community of Practice, housed in the College of Education, at a mid-sized mid-western public research university. The program of study focused on designing a professional development program for future Pre-K12 teachers. The iSTEM 2017 conference presented by the STEMES Community of Practice sought to inform pre-service teachers of STEM pedagogy, and focused on innovative classroom resources, hands-on learning and increasing content confidence when incorporating STEM into classroom instruction. iSTEM 2017 was held in February, 2017, and offered twenty refereed presentations and workshop sessions, a keynote address, and a closing session to over 200 pre-service teachers. Conference participants chose sessions, participated in game-like experiences and shared their learning with each other as well as with conference organizers. Results from participant self-reported surveys were analyzed to measure the impact of the conference on improving participants' confidence in teaching STEM topics, and their attitudes about the instructional methods. These results were added to the conference proceedings, which also contain documentation of each iSTEM 2017 session. Findings suggest that the iSTEM 2017 conference had an overall positive impact on participants' familiarity with STEM education, their belief in the importance of STEM education, and their confidence to integrate STEM education into future instructional practices.

German atomic low meeting 2004

International Nuclear Information System (INIS)

Ossenbuehl, F.

2005-01-01

The conference report on the German atomic law meeting 2004 contains 14 contributions on the German atomic legislation within four parts: Damage precaution in the operational phase; Legal general requirements for the final disposal - considerations ''de lege lata'' and ''de lege ferenda''. Financing of the site searching by a statutory company (''Verbandsmodell''). Atomic supervision authority - federal executive administration or federal self administration?

Southern African Journal of HIV Medicine - Vol 5, No 3 (2004)

African Journals Online (AJOL)

Prevention of mother-to-child Transmission: A report-back from the XV International AIDS Conference, Bangkok, 11 - 16 July 2004 · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD ... Thai me up, Thai me down — The XV IAS Conference in Bangkok · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Forum Engelberg 2004 to be launched in Bern on 13 November

CERN Multimedia

2003-01-01

"Former French science minister Hubert Curien will be among major figures from European politics and science meeting in Bern on 13 November to launch the Forum Engelberg 2004.... Forum Engelberg provides a valuable platform for science and a forum for scientists and politicians to meet. The topic of its 2004 conference, to be held in Lucerne from 1 to 4 March 2004, is "Science on the Agenda of European Politics" (1 page).

1. International four seas conference. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Gougas, A K; Lemoigne, Y; Pepe-Altarelli, M; Petroff, P; Wulz, C E [eds.

1997-07-31

The Frist International Four Seas Conference was held in Trieste, Italy, from June 25th to July 1st, 1995. The principal aim of the Conference was to bring together physicists from the wider Balkan region along with their colleagues from the rest of the world. An overview of the current and future major European and World Physics projects (along with latest experimental results) was presented. Topics included: Physics at FNAL (collider and fixed target), LEP Physics, B and CP violation, presentations from the LHC experiments, AstroParticle Physics, Heavy Ion and Neutrino Physics. Special sessions were devoted to instrumentation projects, to spin-off applications of Particle Physics, while the final session was devoted to presentations connecting Physics and Society. (orig.)

1. International four seas conference. Proceedings

International Nuclear Information System (INIS)

Gougas, A.K.; Lemoigne, Y.; Pepe-Altarelli, M.; Petroff, P.; Wulz, C.E.

1997-01-01

The Frist International Four Seas Conference was held in Trieste, Italy, from June 25th to July 1st, 1995. The principal aim of the Conference was to bring together physicists from the wider Balkan region along with their colleagues from the rest of the world. An overview of the current and future major European and World Physics projects (along with latest experimental results) was presented. Topics included: Physics at FNAL (collider and fixed target), LEP Physics, B and CP violation, presentations from the LHC experiments, AstroParticle Physics, Heavy Ion and Neutrino Physics. Special sessions were devoted to instrumentation projects, to spin-off applications of Particle Physics, while the final session was devoted to presentations connecting Physics and Society. (orig.)

Vienna wirechamber conference 98

International Nuclear Information System (INIS)

1998-02-01

This volume of the Vienna wirechamber conference 1998 contains abstracts of lectures and abstracts of poster sessions of the following topics: high energy physics, gaseous detectors, radiation detectors, calorimetry, drift chambers, wire spark chambers, tracking chambers, neutron detectors, particle detection, muon spectrometry, nuclear medicine. (Suda)

Annual report for 2004

International Nuclear Information System (INIS)

2005-01-01

Article VI.J of the IAEA's Statute requires the Board of Governors to submit 'an annual report to the General Conference concerning the affairs of the Agency and any projects approved by the Agency'. This report covers the period 1 January to 31 December 2004. The Annual Report reviews the results of the Agency's programme according to the three pillars of technology, safety and verification. The main part of the report generally follows the programme structure as it applied in 2004. The introductory chapter, 'The Agency and the World in 2004', seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Cooperation Report. For the convenience of readers, these documents are available on the CD-ROM attached to this report. Additional information covering various aspects of the Agency's programme is also provided on the attached CD-ROM, and is also available on the Agency's iaea.org web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2004/). The Board of Governors oversees the ongoing operations of the Agency. It comprises 35 Member States and generally meets five times a year or more frequently if required for specific situations. Among its functions, the Board adopts the Agency's programme for the incoming biennium and makes recommendations on the Agency's budget to the General Conference. In 2004, the Board considered the Nuclear Technology Review 2004 and various activities related to nuclear science, technology and applications. This included authorizing the implementation of the Programme of Action for Cancer Therapy (PACT). In the area of safety and security, it considered the Nuclear Safety Review for the Year 2003 and related activities. It approved four Action Plans on various safety related activities and

Annual report for 2004

International Nuclear Information System (INIS)

2005-01-01

Article VI.J of the IAEA's Statute requires the Board of Governors to submit 'an annual report to the General Conference concerning the aff airs of the Agency and any projects approved by the Agency'. This report covers the period 1 January to 31 December 2004. The Annual Report reviews the results of the Agency's programme according to the three pillars of technology, safety and verification. The main part of the report generally follows the programme structure as it applied in 2004. The introductory chapter, 'The Agency and the World in 2004', seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Cooperation Report. For the convenience of readers, these documents are available on the CD-ROM attached to this report. Additional information covering various aspects of the Agency's programme is also provided on the attached CD-ROM, and is also available on the Agency's iaea.org web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2004/). The Board of Governors oversees the ongoing operations of the Agency. It comprises 35 Member States and generally meets five times a year or more frequently if required for specific situations. Among its functions, the Board adopts the Agency's programme for the incoming biennium and makes recommendations on the Agency's budget to the General Conference. In 2004, the Board considered the Nuclear Technology Review 2004 and various activities related to nuclear science, technology and applications. This included authorizing the implementation of the Programme of Action for Cancer Therapy (PACT). In the area of safety and security, it considered the Nuclear Safety Review for the Year 2003 and related activities. It approved four Action Plans on various safety related activities

ASME and RCC-MR comparison for the prevention of fatigue analysis

International Nuclear Information System (INIS)

Autrusson, B.; Acker, D.

1989-01-01

The purpose of this survey is to compare the simplified methods, without reference to the safety factor allowed for the mechanical properties. An application of both codes, RCC-MR and ASME, on the design of the wall mock-up of the NET project is made and also an estimation with an elastoplastic analysis. In the case of fatigue analysis according to ASME in the plastic field, the elastic stress is magnified by a K e factor derived from stress variation, S n , disregarding geometrical discontinuities. According to RCC-MR, the elastic maximum strain will magnified by two coefficients accounting for plasticity and variation of Poisson ratio

SPS and PS Experiments Committee

CERN Multimedia

CERN. Geneva

2004-01-01

OPEN SESSION: 09:00 Status report of NA58 / COMPASS: A. Magnon 09:40 Status report of PS212 / DIRAC: L. Tausher 10:10 PS212 / DIRAC Addendum: L. Nemenov CLOSED SESSION on Tuesday, 27 April 2004 after the open session, Main Building, 6th floor conference room

Proceedings of the European Research Reactor Conference - RRFM 2013 Transactions

International Nuclear Information System (INIS)

2013-01-01

In 2013 RRFM, the European Research Reactor Conference is jointly organised by ENS and Atomexpo LLC. This time the Research Reactor community meet in St. Petersburg, Russia. The conference programme will revolve around a series of Plenary Sessions dedicated to the latest global developments with regards to research reactor technology and management. Parallel sessions will focus on all areas of the Fuel Cycle of Research Reactors, their Utilisation, Operation and Management as well as specific research projects and innovative methods in research reactor analysis and design. In 2013 the European Research Reactor Conference will for the first time give special attention to complementary safety assessments of Research Reactors, following the Fukushima-Dai-Ichi NPP's Accident. (authors)

Simulation and optimization of a coking wastewater biological treatment process by activated sludge models (ASM).

Science.gov (United States)

Wu, Xiaohui; Yang, Yang; Wu, Gaoming; Mao, Juan; Zhou, Tao

2016-01-01

Applications of activated sludge models (ASM) in simulating industrial biological wastewater treatment plants (WWTPs) are still difficult due to refractory and complex components in influents as well as diversity in activated sludges. In this study, an ASM3 modeling study was conducted to simulate and optimize a practical coking wastewater treatment plant (CWTP). First, respirometric characterizations of the coking wastewater and CWTP biomasses were conducted to determine the specific kinetic and stoichiometric model parameters for the consecutive aeration-anoxic-aeration (O-A/O) biological process. All ASM3 parameters have been further estimated and calibrated, through cross validation by the model dynamic simulation procedure. Consequently, an ASM3 model was successfully established to accurately simulate the CWTP performances in removing COD and NH4-N. An optimized CWTP operation condition could be proposed reducing the operation cost from 6.2 to 5.5 €/m(3) wastewater. This study is expected to provide a useful reference for mathematic simulations of practical industrial WWTPs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Instruments for documentation of music therapy sessions

DEFF Research Database (Denmark)

Ridder, Hanne Mette Ochsner

It is an important part of the clinical music therapy work to document the daily sessions. For the clinician it is necessary to have a brief overview of each session in order to assess the methods and the process, and not least to be able to give clear reports of these issues to other health care...... professionals at staff meetings, conferences, etc. For music therapists with many clients there is not time enough during a working day to provide comprehensive process descriptions in the music therapy log. Therefore instruments that help the clinician in reducing and structuring this information are needed....... Danish and Norwegian music therapist have collaborated on developing a one page sheet with a structured form where they after each music therapy session document their use of methods and techniques in individual music therapy with persons with dementia. With this instrument therapists have easy access...

Basic requirements of mechanical properties for nuclear pressure vessel materials in ASME-BPV code

International Nuclear Information System (INIS)

Ning Dong; Yao Weida

2011-01-01

The four basic aspects of strengths, ductility, toughness and fatigue strengths can be summarized for overall mechanical properties requirements of materials for nuclear pressure-retaining vessels in ASME-BPV code. These mechanical property indexes involve in the factors of melting, manufacture, delivery conditions, check or recheck for mechanical properties and chemical compositions, etc. and relate to degradation and damage accumulation during the use of materials. This paper specifically accounts for the basic requirements and theoretic basis of mechanical properties for nuclear pressure vessel materials in ASME-BPV code and states the internal mutual relationships among the four aspects of mechanical properties. This paper focuses on putting forward at several problems on mechanical properties of materials that shall be concerned about during design and manufacture for nuclear pressure vessels according to ASME-BPV code. (author)

Proceedings of the 4th Radiobiological conference with international participation 2008

International Nuclear Information System (INIS)

Benova, K.; Falis, M.

2008-06-01

Scientific conference deals with problems in radiobiology, photobiology and radio-environmental sciences. The Conference included the following sessions: (i): Radiobiology; (ii) Biology. Proceedings contains thirty-two papers dealing with the scope of INIS

3rd AINSE neutron scattering conference, Lucas Heights -AINSE Theatre

International Nuclear Information System (INIS)

1986-01-01

Abstracts of papers, the conference program and general information is included in the conference handbook. The program is divided into the following sessions: hydrogeneous and biological materials, industrial applications, phase transitions, magnetism, small angle neutron scattering and new developments

Función adrenal y metabolismo lipídico en niños asmáticos tratados con budesonida

Directory of Open Access Journals (Sweden)

Paoli-de Valeri Mariela

1999-01-01

Full Text Available Objetivo. Evaluar el efecto de bajas dosis de budesonida inhalado sobre la función adrenal y el metabolismo lipídico en niños asmáticos. Material y métodos. Se estudiaron: 10 niños asmáticos (edad promedio, 8.6 años tratados con budesonida inhalado (200-300 µg/día por un lapso mayor a tres meses (grupo A; 15 niños asmáticos (edad promedio, 7.8 años sin tratamiento esteroideo (grupo B, y 10 niños no asmáticos (grupo C. Se determinaron los niveles de cortisol basal y postestímulo con ACTH, andrógenos adrenales, lípidos y cortisol urinario. Resultados. Entre los grupos A y B no hubo diferencias significativas en las variables estudiadas. En los niños asmáticos (grupo A-B el cortisol urinario fue significativamente mayor en relación con el grupo C. Los niveles de triglicéridos, colesterol total, colesterol de la lipoproteína de baja densidad e índices aterogénicos fueron mayores en el grupo de niños asmáticos, con y sin budesonida, comparados con el grupo C. Conclusiones. El tratamiento con dosis bajas de budesonida inhalado en niños asmáticos no modificó la función del eje adrenal ni el metabolismo lipídico. Los pacientes asmáticos presentaron un perfil lipídico aterogénico que podría incrementar el riesgo de enfermedad cardiovascular.

2010 ELECTRODEPOSITION GORDON RESEARCH CONFERENCE, AUGUST 1-6, 2010

Energy Technology Data Exchange (ETDEWEB)

Peter Searson

2010-08-06

The 2010 Gordon Conference on Electrodeposition will present cutting-edge research on electrodeposition with emphasis on (i) advances in basic science, (ii) developments in next-generation technologies, and (iii) new and emerging areas. The Conference will feature a wide range of topics, from atomic scale processes, nucleation and growth, thin film deposition, and electrocrystallization, to applications of electrodeposition in devices including microelectronics, solar energy, and power sources. The Conference will bring together investigators from a wide range of scientific disciplines, including chemical engineering, materials science and engineering, physics, and chemistry. The Conference will feature invited speakers at the forefront of the field, and a late-breaking news session that will provide the opportunity for graduate students, post-docs, and junior faculty to participate. The collegial atmosphere of this Conference, with scientific talks and poster sessions, as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to discuss current issues and promotes cross-disciplinary collaborations in the various research areas represented. The Conference will be held at Colby-Sawyer College, located in the Mt. Kearsarge-Lake Sunapee Region of New Hampshire. The surrounding mountains, forests, and lakes provide a beautiful setting for this conference. The attendance is limited so early application is strongly advised.

Bibliometric Analyses Reveal Patterns of Collaboration between ASMS Members

Science.gov (United States)

Palmblad, Magnus; van Eck, Nees Jan

2018-03-01

We have explored the collaborative network of the current American Society for Mass Spectrometry (ASMS) membership using bibliometric methods. The analysis shows that 4249 members are connected in a single, large, co-authorship graph, including the majority of the most published authors in the field of mass spectrometry. The map reveals topographical differences between university groups and national laboratories, and that the co-authors with the strongest links have long worked together at the same location. We have collected and summarized information on the geographical distribution of members, showing a high coverage of active researchers in North America and Western Europe. Looking at research fields, we could also identify a number of new or `hot' topics among ASMS members. Interactive versions of the maps are available on-line at https://goo.gl/UBNFMQ (collaborative network) and https://goo.gl/WV25vm (research topics). [Figure not available: see fulltext.

QCD@LHC International Conference

CERN Document Server

2016-01-01

The particle physics groups of UZH and ETH will host the QCD@LHC2016 conference (22.8.-26.8., UZH downtown campus), which is part of an annual conference series bringing together theorists and experimentalists working on hard scattering processes at the CERN LHC, ranging from precision studies of Standard Model processes to searches for new particles and phenomena. The format of the conference is a combination of plenary review talks and parallel sessions, with the latter providing a particularly good opportunity for junior researchers to present their results. The conference will take place shortly after the release of the new data taken by the LHC in sping 2016 at a collision energy of 13TeV, expected to more than double the currently available data set. It will be one of the first opportunities to discuss these data in a broader context, and we expect the conference to become a very lively forum at the interface of phenomenology and experiment.

EDITORIAL: Proceedings of the 18th International Conference on General Relativity and Gravitation (GRG18) and 7th Edoardo Amaldi Conference on Gravitational Waves (Amaldi7), Sydney, Australia, July 2007

Science.gov (United States)

Scott, Susan M.; McClelland, David E.

2008-06-01

At GRG17 in Dublin in 2004, it was decided to hold GRG18 in Sydney in 2007. Every six years, the GRG conference (held every three years) and Amaldi meeting (held every two years) occur in the same year around July. This was to be the case in 2007. By mutual agreement of the International Society on General Relativity and Gravitation (ISGRG), which oversees the GR conferences and The Gravitational Wave International Committee (GWIC), which oversees the Amaldi meetings, it was decided to hold these two important conferences concurrently, for the first time, at the same venue, namely Sydney. At a time when the gravitational wave community was beginning to explore the possibility of searches to probe various aspects of the theory, the vision was to bring that community together with the community of gravitational theorists in order to better appreciate the work being done by both parties and to explore possibilities for future research using the mutual expertise. The logistics of running two such large meetings concurrently were considerable. The format agreed upon by the ISGRG and GWIC was the following: common plenary sessions in the mornings from Monday to Friday; six parallel GR workshop sessions and an Amaldi session each afternoon from Monday to Friday (except Wednesday); a combined poster session on Wednesday; a full day of Amaldi sessions on the final day (Saturday). The scientific programme for GRG18 was overseen by a Scientific Organising Committee established by the ISGRG and chaired by Professor Sathyaprakash. The scientific programme for Amaldi7 was overseen by GWIC chaired by Professor Cerdonio. One of the highlights of the conferences was the breadth and quality of the plenary programme put together by the scientific committees. Not only did these talks give an excellent snapshot of the entire field at this time, but they also explored the interfaces with other related fields, which proved of special interest to participants. We were given superb

Annual conference SAEE 2009

International Nuclear Information System (INIS)

2009-01-01

The role of economical support instruments in the successful and efficient propagation of renewable forms of energy was the issue addressed by the 2009 conference of the Swiss Association for Energy Economics. Topics covered include production conditions, resource annuities and remuneration for the feeding-in of power generated from renewable forms of energy, a review of instruments for the encouragement of the use of renewable forms of energy from the economics point of view and the appraisal of support instruments from the economic policy point of view. Contributions presented in the second session include a review of global and national potentials for the use of renewable forms of energy, a review of instruments and their effect on the market from the point of view of an energy utility active at national and European levels, and, finally, the question if economic instruments are needed to support investments in renewable forms of energy is posed. A podium session concluded the conference

The 1997 NRC IST workshops and the status of questions and issues directed to the ASME O and M committee

International Nuclear Information System (INIS)

DiBiasio, A.M.

1998-05-01

This paper describes the results of the four NRC Inservice Testing (IST) Workshops which were held in early 1997 pertaining to NRC Inspection Procedure P 73756, Inservice Testing of Pumps and Valves. It also presents the status of the ASME code committees' resolution of certain questions forwarded to the ASME by the NRC. These questions relate to code interpretations, inconsistencies in the code, and industry concerns that are most appropriately resolved through the ASME consensus process. The ASME committees reviewed the questions at their December 1997 and March 1998 code meetings. Of particular interest are those questions for which the ASME code committees did not agree with the NRC response. These questions, as well as those which the committees provided some additional insight or input, are presented in this paper

PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP'09)

Science.gov (United States)

Gruntorad, Jan; Lokajicek, Milos

2010-11-01

The 17th International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held on 21-27 March 2009 in Prague, Czech Republic. CHEP is a major series of international conferences for physicists and computing professionals from the worldwide High Energy and Nuclear Physics community, Computer Science, and Information Technology. The CHEP conference provides an international forum to exchange information on computing experience and needs for the community, and to review recent, ongoing and future activities. Recent conferences were held in Victoria, Canada 2007, Mumbai, India in 2006, Interlaken, Switzerland in 2004, San Diego, USA in 2003, Beijing, China in 2001, Padua, Italy in 2000. The CHEP'09 conference had 600 attendees with a program that included plenary sessions of invited oral presentations, a number of parallel sessions comprising 200 oral and 300 poster presentations, and an industrial exhibition. We thanks all the presenters, for the excellent scientific content of their contributions to the conference. Conference tracks covered topics on Online Computing, Event Processing, Software Components, Tools and Databases, Hardware and Computing Fabrics, Grid Middleware and Networking Technologies, Distributed Processing and Analysis and Collaborative Tools. The conference included excursions to Prague and other Czech cities and castles and a banquet held at the Zofin palace in Prague. The next CHEP conference will be held in Taipei, Taiwan on 18-22 October 2010. We would like thank the Ministry of Education Youth and Sports of the Czech Republic and the EU ACEOLE project for the conference support, further to commercial sponsors, the International Advisory Committee, the Local Organizing Committee members representing the five collaborating Czech institutions Jan Gruntorad (co-chair), CESNET, z.s.p.o., Prague Andrej Kugler, Nuclear Physics Institute AS CR v.v.i., Rez Rupert Leitner, Charles University in Prague, Faculty of Mathematics and

6th International Conference on Operator Theory

CERN Document Server

Douglas, R; Sz-Nagy, B; Voiculescu, D; Arsene, Gr

1982-01-01

The annual Operator Theory conferences in Timigoara are conceived as a means to promote cooperation and exchange of in­ formation between specialists in all areas of Operator Theory. The present volume consist of papers contributed by the partici­ pants of the 1981 Conference. Since many of these papers contain results on the invariant subspace problem or are related to the role of invariant subspaces in the study of operators or operator systems, we thought it appropiate to mention this in the title of the volume, though the "other topics" have a wide range. As in past years, special sessions concerning other fields of Functio­ nal Analysis were organized at the 1981 Conference, but contri­ butions to these sessions are not included in the present volume. The research contracts of the Department of Mathematics of INCREST with the National Council for Sciences and Technology of Romaliia provided the means for developping the research activity in Functional Analysis; these contracts constitute the generous...

The ASME Section 11 Special Working Group On Plant Life Extension

International Nuclear Information System (INIS)

Katz, L.R.

1990-01-01

The codes and standards applicable to plant life extension have not been identified in the U.S. at this time. However, several initiatives have been taken to establish specific codes and standards pertaining to nuclear plant life extension (PLEX). One of these initiatives, sponsored by ASME, is the Section XI Special Working Group on Plant Life Extension (SWG-PLEX). The SWG-PLEX reports to the ASME Section XI Subcommittee and is responsible for recommending or drafting rules and requirements for modifying Section XI to accommodate age-related degradation to support nuclear plant life extension. This paper summarizes the results and reports the activities of the SWG-PLEX during the 1989/1990 period

PREFACE: 31st European Physical Society Conference on Plasma Physics

Science.gov (United States)

Dendy, Richard

2004-12-01

chaired by Henry Hutchinson (RAL, Chilton), and to the Plasma Physics and Controlled Fusion journal team (Institute of Physics Publishing, Bristol), for their work on this conference. At the 2004 European Physical Society Conference on Plasma Physics, plenary invited speakers whose talks spanned the entire field were followed, each day, by multiple parallel sessions which also included invited talks. Invited speakers in both these categories were asked to contribute papers to this special issue (the contributed papers at this conference, and at all recent conferences in this series, are archived at http://epsppd.epfl.ch). The Programme Committee is very grateful to the many invited speakers who have responded positively to this request. Invited papers appear here in their order of presentation during the week beginning 28 June 2004; this ordering provides an echo of the character of the conference, as it was experienced by those who took part. Programme Committee 2004 Professor Richard Dendy UKAEA Culham Division, UK Chairman and guest editor Dr Jean-Luc Dorier Centre de Recherches en Physique des Plasmas, Lausanne, Switzerland (Co-ordinator of dusty plasmas and guest editor) Professor Jürgen Meyer-ter-Vehn Max-Planck-Institut für Quantenoptik, Garching, Germany (Co-ordinator of laser-plasma interaction and beam plasma physics and guest editor) Dr Peter Norreys Rutherford Appleton Laboratory, Chilton, UK (Scientific Secretary and guest editor) Dr Emilia R Solano CIEMAT Laboratorio Nacional de Fusión, Madrid, Spain ( Co-ordinator of magnetic confinement fusion and guest editor) Dr Shalom Eliezer Soreq Nuclear Research Centre, Israel Dr Wim Goedheer FOM-Instituut voor Plasmafysica, Rijnhuizen, Netherlands Professor Henry Hutchinson Rutherford Appleton Laboratory, Chilton, UK Professor John Kirk Max-Planck-Institut für Kernphysik, Heidelberg, Germany Dr Raymond Koch Ecole Royale Militaire/Koninklijke Militaire School, Brussels, Belgium Professor Gerrit Kroesen Technische

Conference proceedings of the 4. international conference on CANDU fuel. V. 1,2

International Nuclear Information System (INIS)

1995-01-01

These proceedings contain the full texts of all 65 papers presented at the 4th International Conference on CANDU fuel. As such, they represent an update on the state-of-the-art in such important CANDU fuel topics as International Development Programs and Operating Experience with CANDU fuel, Performance Assessments and Fuel Behavior Modeling, Fuel Properties, Licensing and Accident Analyses for CANDU fuel, Design, Testing and Manufacturing, and Advanced Fuel Designs. The large number of papers required the use of parallel sessions for the first time at a CANDU Fuel Conference

Conference proceedings of the 4. international conference on CANDU fuel. V. 1,2

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

These proceedings contain the full texts of all 65 papers presented at the 4th International Conference on CANDU fuel. As such, they represent an update on the state-of-the-art in such important CANDU fuel topics as International Development Programs and Operating Experience with CANDU fuel, Performance Assessments and Fuel Behavior Modeling, Fuel Properties, Licensing and Accident Analyses for CANDU fuel, Design, Testing and Manufacturing, and Advanced Fuel Designs. The large number of papers required the use of parallel sessions for the first time at a CANDU Fuel Conference.

Applied and Environmental Microbiology Gordon Research Conference

Energy Technology Data Exchange (ETDEWEB)

Wall, Judy D.

2003-11-19

The main objective of the Gordon Research Conference on Applied and Environmental Microbiology was to present and discuss new, fundamental research findings on microorganisms, their activities in the environment, their ecosystem-level effects, and their environmental or commercial applications. To accomplish this goal, knowledge of microbial diversity, interactions and population dynamics was required. The genomic basis of microbial processes, the cycling of naturally occurring and hazardous substances, and methodologies to assess the functional relationships of microorganisms in their habitats were essential for understanding the ecological consequences of microbial activities and the formulation of generalizing principles. In the last decade, molecular technology has revealed that microbial diversity is far more extensive than the limited view obtained from culturing procedures. Great advances in environmental microbiology have resulted from the development and application of molecular approaches to ecology and molecular evolution. A further surprise resulting from the application of these new tools is the blurring of the distinction between pathogenic traits versus those considered non-pathogenic. This year's conference addressed the issues of biodiversity, its development, and the impact of stress on gene selection and expression. In addition microbial metabolic versatility with toxins such as heavy metals, antibiotics, and organic pollutants were discussed. The nine session topics were (1) biodiversity and the bacterial species, (2) mechanisms of biodiversification, (3) biofilms in health and environment, (4) a genomic view of microbial response to stress, (5) microbial use of toxic metals, (6) microbial mineral formation and dissolution, (7) power and limitations of antimicrobials, (8) biodegradation of organic pollutants, and (9) astrobiology. The Conference had an international profile: the Conference Vice-Chair, Dr. Gerard Muyzer, was from The Nether

Proceedings of the 2002 climate change and GHG technology conference and tradeshow

International Nuclear Information System (INIS)

2002-01-01

The emphasis of this conference and tradeshow was to provide all participants, from corporate planners and decision makers to technical staff and technology solution providers, with a forum where they could exchange views concerning economical climate change technology solutions applicable to the oil and gas, oilsands, coal, mining, pipeline and petrochemical industries operating in Western Canada. There were six major objectives for this conference: (1) disseminate information with regard to how implementing climate change and greenhouse gas technologies and associated projects can improve financial and environmental performance, (2) look at case studies on economical climate change and greenhouse gas technologies and projects that have helped organizations improve their environmental and economical performance, (3) stimulate the launch of new projects and partnerships and further advance existing projects, (4) identify and facilitate new opportunities for implementation of climate change and greenhouse gas technologies and projects in the long term, (5) participate in a tradeshow as a greenhouse gas technology supplier or customer, and (6) network with other industry representatives. Six half-day sessions comprised the conference with topics as follows: session 1 dealt with business risk, economics and opportunities, session 2 discussed fugitive emissions and energy efficiency, session 3 was concerned with carbon dioxide capture, transportation, storage and use, session 4 was devoted to flaring and venting, session 5 dealt with long-term verification and monitoring technologies, and session 6 included additional technology solution presentations. refs., tabs., figs

Bronchodilatory and anti-inflammatory effects of ASM-024, a nicotinic receptor ligand, developed for the treatment of asthma.

Science.gov (United States)

Assayag, Evelyne Israël; Beaulieu, Marie-Josée; Cormier, Yvon

2014-01-01

Conventional asthma and COPD treatments include the use of bronchodilators, mainly β2-adrenergic agonists, muscarinic receptor antagonists and corticosteroids or leukotriene antagonists as anti-inflammatory agents. These active drugs are administered either separately or given as a fixed-dose combination medication into a single inhaler. ASM-024, a homopiperazinium compound, derived from the structural modification of diphenylmethylpiperazinium (DMPP), has been developed to offer an alternative mechanism of action that could provide symptomatic control through combined anti-inflammatory and bronchodilator properties in a single entity. A dose-dependent inhibition of cellular inflammation in bronchoalveolar lavage fluid was observed in ovalbumin-sensitized mice, subsequently treated for 3 days by nose-only exposure with aerosolized ASM-024 at doses up to 3.8 mg/kg (ED50 = 0.03 mg/kg). The methacholine ED250 values indicated that airway hyperresponsivenness (AHR) to methacholine decreased following ASM-024 administration by inhalation at a dose of 1.5 mg/kg, with a value of 0.145 ± 0.032 mg/kg for ASM 024-treated group as compared to 0.088 ± 0.023 mg/kg for untreated mice. In in vitro isometric studies, ASM-024 elicited dose-dependent relaxation of isolated mouse tracheal, human, and dog bronchial preparations contracted with methacholine and guinea pig tracheas contracted with histamine. ASM-024 showed also a dose and time dependant protective effect on methacholine-induced contraction. Overall, with its combined anti-inflammatory, bronchodilating and bronchoprotective properties, ASM-024 may represent a new class of drugs with a novel pharmacological approach that could prove useful for the chronic maintenance treatment of asthma and, possibly, COPD.

The Management of Chronic Viral Hepatitis: A Canadian Consensus Conference 2004

Directory of Open Access Journals (Sweden)

Morris Sherman

2004-01-01

Full Text Available Several government and nongovernment organizations held a consensus conference on the management of acute and chronic viral hepatitis to update previous management recommendations. The conference became necessary because of the introduction of new forms of therapy for both hepatitis B and hepatitis C. The conference issued recommendations on the investigation and management of chronic hepatitis B, including the use of lamivudine, adefovir and interferon. The treatment of hepatitis B in several special situations was also discussed. There were also recommendations on the investigation and treatment of chronic hepatitis C and hepatitis C-HIV coinfection. In addition, the document makes some recommendations about the provision of services by provincial governments to facilitate the delivery of care to patients with hepatitis virus infection. The present document is meant to be used by practitioners and other health care providers, including public health staff and others not directly involved in patient care.

Creep-fatigue damage evaluation for SS-316LN (ORNL PLATES): - RCC-MR vs. ASME SEC III - NH

International Nuclear Information System (INIS)

Sati, Bhuwan Chandra; Jalaldeen, S.; Velusamy, K.; Selvaraj, P.

2016-01-01

Investigations of high temperature tests done on ORNL plate with deformation control loading, under creep-fatigue damage have been presented. The test results with methodology of RCC-MR and ASME-NH life prediction under creep-fatigue loading have been assessed. The stress relaxation effect in calculating the life using RCC-MR under creep-fatigue damage is found to be significant in presence of secondary stress. RCC-MR: 2007 is more realistic number of cycles (predicts 51 number of cycles) as compared to ASME-NH (predicts 312 number of cycles) which is demonstrated by the experimental work (observed 86 numbers of cycles). Between RCC-MR and experimental work, design code seems to be more conservative for life prediction due to creep-fatigue damage. For fatigue damage, the approaches are same and the difference comes from material properties and the starting stress for applying Neuber's rule. ASME approach has the limitation of stress range magnitude. ASME approach predicts lower elastic plus plastic strain for the cases having S* above the linear stress limit. For creep strain and creep damage evaluation, ASME and RCC-MR have different approaches for calculating the stress at the beginning and during the hold period. The RCC-MR takes account of cyclic hardening or softening effects (hardening in the present case of 316 LN) by means of the cyclic stress-strain curve and the benefit of symmetrization effects which are significant for this material. The ASME code neglects these effects and instead relies on an approach based on the isochronous stress-strain curves. (author)

A study on technical issues of materials and design bases in ASME section III subsection NH code

International Nuclear Information System (INIS)

Lee, Hyeong Yeon; Kim, Jong Bum; Yoo, Bong

2000-12-01

In this study, an analysis of evaluation report by ORNL on the technical issues of elevated temperatures design guide line, ASME Code Section III Subsection NH was conducted and a brief evaluation procedure of the creep-fatigue damage was presented. ORNL published the report in 1993 and reviewed the issue areas where code rules or regulatory guides may be lacking or inadequate to ensure safe operation over the expected life cycles for liquid metal reactor systems. From historical viewpoint of the ASME NH code development, ASME Code Case 47 was changed much in 1989 edition, which includes the stress relaxation behavior in creep damage evaluation. Afterwards the 1992 version of CC N-47 was upgraded to Subsection NH in 1995 edition, which is the same with that of CC N-47 1992 edition except few material data. This report brings up the technical and regulatory issues that can not guarantee the safe and reliable operation of the ALMR which got the conceptual design certification from NRC. Twenty three technical issues were raised and settlement methodology were proposed. Additionally, the status of items approved by ASME code subgroup of elevated temperature design committee for the revision of the most recent 1998 edition of ASME NH was described

Proceedings of the International Conference Nuclear Energy for New Europe 2004

International Nuclear Information System (INIS)

Jencic, I.; Tkavc, M.

2004-01-01

International Conference Nuclear Energy for New Europe is an annual meeting of the Nuclear Society of Slovenia. This Cd-Rom is the collection of the 81 articles from Slovenia, surrounding countries and countries of the Central and Eastern European Region presented at the title conference. Topics are: reactor physics, thermal hydraulics, severe accidents, probabilistic safety analysis, nuclear power plant operation, nuclear materials and structural integrity, radiology and environment, education, regulatory issues and public relations, radioactive waste, nuclear methods and related topics

ASM-3 acid sphingomyelinase functions as a positive regulator of the DAF-2/AGE-1 signaling pathway and serves as a novel anti-aging target.

Directory of Open Access Journals (Sweden)

Yongsoon Kim

Full Text Available In C. elegans, the highly conserved DAF-2/insulin/insulin-like growth factor 1 receptor signaling (IIS pathway regulates longevity, metabolism, reproduction and development. In mammals, acid sphingomyelinase (ASM is an enzyme that hydrolyzes sphingomyelin to produce ceramide. ASM has been implicated in CD95 death receptor signaling under certain stress conditions. However, the involvement of ASM in growth factor receptor signaling under physiological conditions is not known. Here, we report that in vivo ASM functions as a positive regulator of the DAF-2/IIS pathway in C. elegans. We have shown that inactivation of asm-3 extends animal lifespan and promotes dauer arrest, an alternative developmental process. A significant cooperative effect on lifespan is observed between asm-3 deficiency and loss-of-function alleles of the age-1/PI 3-kinase, with the asm-3; age-1 double mutant animals having a mean lifespan 259% greater than that of the wild-type animals. The lifespan extension phenotypes caused by the loss of asm-3 are dependent on the functions of daf-16/FOXO and daf-18/PTEN. We have demonstrated that inactivation of asm-3 causes nuclear translocation of DAF-16::GFP protein, up-regulates endogenous DAF-16 protein levels and activates the downstream targeting genes of DAF-16. Together, our findings reveal a novel role of asm-3 in regulation of lifespan and diapause by modulating IIS pathway. Importantly, we have found that two drugs known to inhibit mammalian ASM activities, desipramine and clomipramine, markedly extend the lifespan of wild-type animals, in a manner similar to that achieved by genetic inactivation of the asm genes. Our studies illustrate a novel strategy of anti-aging by targeting ASM, which may potentially be extended to mammals.

ASM-3 acid sphingomyelinase functions as a positive regulator of the DAF-2/AGE-1 signaling pathway and serves as a novel anti-aging target.

Science.gov (United States)

Kim, Yongsoon; Sun, Hong

2012-01-01

In C. elegans, the highly conserved DAF-2/insulin/insulin-like growth factor 1 receptor signaling (IIS) pathway regulates longevity, metabolism, reproduction and development. In mammals, acid sphingomyelinase (ASM) is an enzyme that hydrolyzes sphingomyelin to produce ceramide. ASM has been implicated in CD95 death receptor signaling under certain stress conditions. However, the involvement of ASM in growth factor receptor signaling under physiological conditions is not known. Here, we report that in vivo ASM functions as a positive regulator of the DAF-2/IIS pathway in C. elegans. We have shown that inactivation of asm-3 extends animal lifespan and promotes dauer arrest, an alternative developmental process. A significant cooperative effect on lifespan is observed between asm-3 deficiency and loss-of-function alleles of the age-1/PI 3-kinase, with the asm-3; age-1 double mutant animals having a mean lifespan 259% greater than that of the wild-type animals. The lifespan extension phenotypes caused by the loss of asm-3 are dependent on the functions of daf-16/FOXO and daf-18/PTEN. We have demonstrated that inactivation of asm-3 causes nuclear translocation of DAF-16::GFP protein, up-regulates endogenous DAF-16 protein levels and activates the downstream targeting genes of DAF-16. Together, our findings reveal a novel role of asm-3 in regulation of lifespan and diapause by modulating IIS pathway. Importantly, we have found that two drugs known to inhibit mammalian ASM activities, desipramine and clomipramine, markedly extend the lifespan of wild-type animals, in a manner similar to that achieved by genetic inactivation of the asm genes. Our studies illustrate a novel strategy of anti-aging by targeting ASM, which may potentially be extended to mammals.

ASM-3 Acid Sphingomyelinase Functions as a Positive Regulator of the DAF-2/AGE-1 Signaling Pathway and Serves as a Novel Anti-Aging Target

Science.gov (United States)

Kim, Yongsoon; Sun, Hong

2012-01-01

In C. elegans, the highly conserved DAF-2/insulin/insulin-like growth factor 1 receptor signaling (IIS) pathway regulates longevity, metabolism, reproduction and development. In mammals, acid sphingomyelinase (ASM) is an enzyme that hydrolyzes sphingomyelin to produce ceramide. ASM has been implicated in CD95 death receptor signaling under certain stress conditions. However, the involvement of ASM in growth factor receptor signaling under physiological conditions is not known. Here, we report that in vivo ASM functions as a positive regulator of the DAF-2/IIS pathway in C. elegans. We have shown that inactivation of asm-3 extends animal lifespan and promotes dauer arrest, an alternative developmental process. A significant cooperative effect on lifespan is observed between asm-3 deficiency and loss-of-function alleles of the age-1/PI 3-kinase, with the asm-3; age-1 double mutant animals having a mean lifespan 259% greater than that of the wild-type animals. The lifespan extension phenotypes caused by the loss of asm-3 are dependent on the functions of daf-16/FOXO and daf-18/PTEN. We have demonstrated that inactivation of asm-3 causes nuclear translocation of DAF-16::GFP protein, up-regulates endogenous DAF-16 protein levels and activates the downstream targeting genes of DAF-16. Together, our findings reveal a novel role of asm-3 in regulation of lifespan and diapause by modulating IIS pathway. Importantly, we have found that two drugs known to inhibit mammalian ASM activities, desipramine and clomipramine, markedly extend the lifespan of wild-type animals, in a manner similar to that achieved by genetic inactivation of the asm genes. Our studies illustrate a novel strategy of anti-aging by targeting ASM, which may potentially be extended to mammals. PMID:23049887

Abelian Sandpile Model (ASM) and Infinite Volume Limit

Indian Academy of Sciences (India)

ASM- Properties. Any possible sequence of topplings leads to the same stable configuration [Dhar]. The result of particle addition at and subsequent relaxation is given by an operator. £ бвд £ евд £. , where вд £. ¢. ¦. ¤ззз ¤ вг иг . £. ©. ¢ йа£. (Abelian). 7-b ...

Proceedings of the 26th International Cryogenic Engineering Conference - International Cryogenic Material Conference 2016

Science.gov (United States)

Datta, T. S.; Sharma, R. G.; Kar, S.

2017-02-01

International Conference ICEC 26 - ICMC 2016 was organized at New Delhi, India during March 7-11, 2016. Previous conference ICEC25-ICMC 2014 was held at the University of Twente, The Netherlands in July 2014. Next Conference ICEC 27- ICMC 2018 will be held at Oxford, UK during September 3-7, 2018 1. Introduction This is a biennial international conference on cryogenic engineering and cryogenics materials organized by the International Cryogenic Engineering Committee and the International Cryogenic Material Committee. For some years, the host country has been alternating between Europe and Asia. The present conference was held at the Manekshaw Convention Centre, New Delhi, India during March 7-11, 2016 and hosted jointly by the Indian Cryogenics Council (ICC) and the Inter-University Accelerator Centre (IUAC), New Delhi. Put all together as many as 547 persons participated in the conference. Out of these 218 were foreign delegates coming from 25 countries and the rest from India. 2. Inaugural Session & Course Lectures The pre conference short course lectures on “Cryocoolers” and “Superconducting Materials for Power Applications” were organized on 7th March. Cryocooler course was given jointly by Dr. Chao Wang from M/s. Cryomech, USA and Prof. Milind Atrey from IIT Bombay, India. The Course on Superconducting Materials was given by Prof. Venkat Selvamanickam from the University of Houston, USA. The conference was inaugurated in the morning of March 8th in a typical Indian tradition and in the presence of the Chief Guest, Dr. R Chidambaram (Principle Scientific Adviser to Govt. of India), Guest of Honour, Prof. H Devaraj (Vice Chairman University Grant Commission), Prof Marcel ter Brake ( Chair, ICEC Board), Prof. Wilfried Goldacker (Chair, ICMC board), Dr. D Kanjilal (Director IUAC), Dr R K Bhandari, (President, Indian Cryogenic Council ). Dr. T S Datta, Chair Local Organizing Committee coordinated the proceedings of the inaugural function. 3. Technical

International Women's Leadership Conference Proceedings.

Science.gov (United States)

Journal of Dental Education, 1999

1999-01-01

Presents proceedings of the American Association of Dental Schools' International Women's Leadership Conference. Addresses, panel presentations, and general-sessions topics included leadership training and promotion for women in dental education, women's health issues and research, the glass ceiling, infrastructures for research and training,…

PREFACE: Quark Matter 2006 Conference

Science.gov (United States)

Ma, Yu-Gang; Wang, En-Ke; Cai, Xu; Huang, Huan-Zhong; Wang, Xin-Nian; Zhu, Zhi-Yuan

2007-07-01

scientific program of the conference began with an overview of high energy nuclear physics in China by Professor Wenqing Shen, vice president of the National Natural Science Foundation of China. Professor Shen highlighted many contributions made by the Chinese scientists in both theory and experiment. Dr Nick Samios, former director of Brookhaven National Laboratory (BNL), gave a vivid account of the early years of RHIC and recent accomplishments. Highlights of the conference include new results from RHIC at BNL and SPS (Super Proton Synchrotron) at CERN (European Organization for Nuclear Research). Many experimental results reported at the conference support the notion that the quark-gluon matter at RHIC behaves like a perfect liquid with minimum viscosity to entropy ratio. There were 15 plenary sessions which covered 54 plenary talks, 12 parallel sessions and 1 poster session. A total of 320 abstracts were submitted to the conference out of which 124 were selected for oral presentation and the rest were assigned to the poster session. Talks and posters in the conference covered a broad range of experimental and theoretical progress in ultra-relativistic heavy-ion collisions, which includes new evidence of sQGP, jet quenching and heavy quark energy loss, heavy-ion collision phenomenology, quantum field theory at finite temperature and/or density, and relevant areas of astrophysics and plasma physics. The Quark Matter 2006 conference coincided with the 80th birthday of Professor T D Lee. A special reception was held in the banquet hall of the Shanghai Grand Theatre to celebrate Professor Lee's birthday and to honor his great contributions to physics, in particular, to the development of high energy nuclear physics research in China. We would like to thank the members of the International Advisory Committee for providing valuable advice on a variety of matters, from the general structure of the conference to the selection of the plenary speakers and selection of abstracts for

33th all-union conference on nuclear spectroscopy and atomic nucleus structure

International Nuclear Information System (INIS)

Adam, J.; Bem, P.

1984-01-01

The 33rd All-Union Conference on Nuclear Spectroscopy and the Atomic Nucleus Structure was held in Moscow from April 19 to 22. The plenary session heard 5 papers which summed up the results of extensive programmes of theoretical and experimental research. More than two thirds of the conference were held in parallel sessions: Properties of Concrete Nuclei, Nuclear Reactions (theory, experiment), Theory of the Nucleus, Mechanisms of Alpha-, Beta- and Gamma Processes, Nuclear Spectroscopy Techniques and Applied Nuclear Spectroscopy. (B.S.)

12th International Conference on Second Messengers and Phosphoproteins

Czech Academy of Sciences Publication Activity Database

Tuháčková, Zdena

2004-01-01

Roč. 32, č. 3 (2004), s. 89-91 ISSN 1211-2526. [International conference on second messengers and phosphoproteins /12./. Montreal, 03.08.2004-07.08.2004] R&D Projects: GA ČR GA301/04/0550; GA AV ČR KSK5020115 Institutional research plan: CEZ:AV0Z5052915 Keywords : MTOR -PI3-K signalling * p70 S 6 kinase * v-Src Subject RIV: CE - Biochemistry

Proceedings of the 24th KAIF/KNS Annual Conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-04-15

This proceedings contains articles of the 24th KAIF/KNS Annual Conference of the KAIF and Korean Nuclear Society. It was held on Apr. 8-10, 2009 in Seoul, Korea and subject of 24th Conference is the role of nuclear energy: Green enertopia with nuclear. This proceedings is comprised of 8 sessions. The main topic titles of session are as follows: Operation and maintenance of nuclear power plants, Betterment of nuclear power utilization, Enhanced future application of nuclear science and technology, Radioactive waste management, RI production and its utilization, Design, engineering, manufacturing, and construction of NPP in Korea, Nuclear fuel cycle, Nuclear safety and regulation. (Yi, J. H.)

7th Czechoslovak spectroscopic conference and VIIIth CANAS (Conference on analytical atomic spectroscopy). Abstracts. Vol. 2

International Nuclear Information System (INIS)

1984-01-01

The conference on spectroscopy held in Ceske Budejovice on June 18-22, 1984, proceeded in three sessions: atomic spectroscopy, molecular spectroscopy and special spectroscopic techniques. In the molecular spectroscopy session, 81 papers were read of which 12 were inputted in INIS. The subject of inputted papers was the use of NMR for the analysis of organic compounds and for the study of radiation defects in semiconductors, and the use of infrared spectroscopy for the analysis of nuclear and irradiated materials. (J.P.)

Shigella Antimicrobial Drug Resistance Mechanisms, 2004-2014.

Science.gov (United States)

Nüesch-Inderbinen, Magdalena; Heini, Nicole; Zurfluh, Katrin; Althaus, Denise; Hächler, Herbert; Stephan, Roger

2016-06-01

To determine antimicrobial drug resistance mechanisms of Shigella spp., we analyzed 344 isolates collected in Switzerland during 2004-2014. Overall, 78.5% of isolates were multidrug resistant; 10.5% were ciprofloxacin resistant; and 2% harbored mph(A), a plasmid-mediated gene that confers reduced susceptibility to azithromycin, a last-resort antimicrobial agent for shigellosis.

46 CFR 53.01-3 - Adoption of section IV of the ASME Boiler and Pressure Vessel Code.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Adoption of section IV of the ASME Boiler and Pressure...) MARINE ENGINEERING HEATING BOILERS General Requirements § 53.01-3 Adoption of section IV of the ASME Boiler and Pressure Vessel Code. (a) Heating boilers shall be designed, constructed, inspected, tested...

11th radiochemical conference

International Nuclear Information System (INIS)

Prasil, Z.

1987-01-01

The conference met in four sesions which discussed: Separation methods, Radioanalytical methods, Labelled compounds and Miscellaneous. The first session discussed extraction methods, ion exchange and chromatographic separation of radioisotopes. The second session heard papers on the application of these methods, e.g., in geochemistry, on the use of radioactive tracers in radiochemical analysis and the use of activation analysis in the determination of trace elements. The third session heard papers on the preparation of labelled organic compounds with isotopes 3 H, 14 C, radioiodine and 32 P, on the preparation of RIA kits and on the chemistry and radiopharmacology of technetium compounds. The other contributions which could not be heard in any of the three sessions discussed, e.g., the preparation of elements on the cyclotron and microtron, the production of a new 99m Tc-generator, the participation of the IAEA in processing low- and medium-level radioactive wastes, etc. (E.S.)

ICENES '91:Sixth international conference on emerging nuclear energy systems

International Nuclear Information System (INIS)

1991-01-01

This document contains the program and abstracts of the sessions at the Sixth International Conference on Emerging Nuclear Energy Systems held June 16--21, 1991 at Monterey, California. These sessions included: The plenary session, fission session, fission and nonelectric session, poster session 1P; (space propulsion, space nuclear power, electrostatic confined fusion, fusion miscellaneous, inertial confinement fusion, μ-catalyzed fusion, and cold fusion); Advanced fusion session, space nuclear session, poster session 2P, (nuclear reactions/data, isotope separation, direct energy conversion and exotic concepts, fusion-fission hybrids, nuclear desalting, accelerator waste-transmutation, and fusion-based chemical recycling); energy policy session, poster session 3P (energy policy, magnetic fusion reactors, fission reactors, magnetically insulated inertial fusion, and nuclear explosives for power generation); exotic energy storage and conversion session; and exotic energy storage and conversion; review and closing session

4th European Turbulence Conference

CERN Document Server

1993-01-01

The European Turbulence Conferences have been organized under the auspices of the European Mechanics Committee (Euromech) to provide a forum for discussion and exchange of recent and new results in the field of turbulence. The first conference was organized in Lyon in 1986 with 152 participants. The second and third conferences were held in Berlin (1988) and Stockholm (1990) with 165 and 172 participants respectively. The fourth was organized in Delft from 30 June to 3 July 1992 by the J.M. Burgers Centre. There were 214 participants from 22 countries. This steadily growing number of participants demonstrates both the success and need for this type of conference. The main topics of the Fourth European Turbulence Conference were: Dynamical Systems and Transition; Statistical Physics and Turbulence; Experiments and Novel Experimental Techniques; Particles and Bubbles in Turbulence; Simulation Methods; Coherent Structures; Turbulence Modelling and Compressibility Effects. In addition a special session was held o...

Epigenetics, eh! A meeting summary of the Canadian Conference on Epigenetics.

Science.gov (United States)

Rodenhiser, David I; Bérubé, Nathalie G; Mann, Mellissa R W

2011-10-01

In May 2011, the Canadian Conference on Epigenetics: Epigenetics Eh! was held in London, Canada. The objectives of this conference were to showcase the breadth of epigenetic research on environment and health across Canada and to provide the catalyst to develop collaborative Canadian epigenetic research opportunities, similar to existing international epigenetic initiatives in the US and Europe. With ten platform sessions and two sessions with over 100 poster presentations, this conference featured cutting-edge epigenetic research, presented by Canadian and international principal investigators and their trainees in the field of epigenetics and chromatin dynamics. An EpigenART competition included ten artists, creating a unique opportunity for artists and scientists to interact and explore their individual interpretations of this scientific discipline. The conference provided a unique venue for a significant cross-section of Canadian epigenetic researchers from diverse disciplines to meet, interact, collaborate and strategize at the national level.

Proceedings of the upwind downwind 2008 conference : climate change and healthy cities

International Nuclear Information System (INIS)

2008-01-01

This conference provided a forum to examine the effects of poor air quality on public health. It was attended by urban planners, public health officials, policy makers, environmental managers, non-government organizations, academics, industry, community groups and politicians. The first session of the conference focused on research in cardiovascular and respiratory health impacts, linkages and actions to improve air quality and address climate change. The session on urban and transportation planning focused on how the implementation of transportation systems and land use patterns through urban design can impact health and air quality. It examined green buildings, standards and their linkages to improving local air quality. The session on climate change and local partnerships focused on local actions that cities, organizations and individuals can take to improve air quality and address climate change. One of the 16 presentations featured at this conference has been catalogued separately for inclusion in this database. refs., tabs., figs

Conference summaries

Energy Technology Data Exchange (ETDEWEB)

Reynolds, Tim [Inta Communication Limited for European Service Network/ DG Research, Trillium House, 32 New Street, St. Neots, Cambridge PE19 1AJ (United Kingdom)

2004-07-01

The summaries were derived from presentations, interviews and discussions at the conference. The summaries are given at two levels, overall for the conference and for specific sessions as follows: 1) Overall Conference: 'A Sound Scientific Basis for Serious Decisions; 2) Sessions on EC Policy and Socio-Political Issues: 'Promoting Safety and Protecting Society'; 3) Session on P and T: 'Partitioning and Transmutation: A Technical Fix or Technical Training?'; 4) Sessions on Geological Disposal and Research Networking: 'No Technical Barriers to Geological Disposal'. First an overall summary of Euradwaste '04 is presented. Significant progress was made on the technical and scientific basis for geological disposal of radioactive waste during the European Commission's Fifth EURATOM Framework Programme for Research (FP5). Deep geological disposal is technically feasible now and can demonstrate the guarantees of long-term isolation and protection of the public. In parallel, socio-political studies have produced methodologies for constructive dialogue with potential host communities that reflect the honesty and openness expected by a democratic society. A harmonized legislative framework for nuclear safety and waste disposal across the enlarged European Union is currently being discussed. Disposal in deep (> 300 metre) geological repositories, the favoured strategy in Europe for long-lived high-level radioactive waste, is now possible. The Sessions on EC Policy and Socio-Political Issues are summarized as follows. The opening day of Euradwaste '04 focused on European Commission policy, including the proposed Directives on disposal of radioactive waste and nuclear safety and socio-political aspects including governance and decision making, public perception/acceptance of waste disposal and its sustainability. A decision on the proposed package will now be made after Union enlargement. Public agreement on the siting of

Proceedings of the CANBIO conference : realizing the bioenergy opportunity

International Nuclear Information System (INIS)

2007-01-01

This conference explored domestic bioenergy options in Canada, including potential for bioenergy trade. As biomass cogeneration proceeds, investments are now being made for exportable biofuels such as wood pellets and BioOil, driven by demand for biomass in Europe. Mill residue surpluses are rapidly diminishing, causing industry and government to look at forest residues. The conference also addressed obstacles to developing bioenergy options in Canada compared to countries with comprehensive bioenergy strategies. An entire session was devoted to Finnish expertise in residue harvesting and bioenergy equipment. Various national and international development opportunities for wood residue and bioenergy products were also explored along with new technologies in bioenergy practices and development in syngas production techniques. The conference sessions were entitled: volumes of economic biomass; costs and logistics of forest biomass; development opportunities; Finnish solutions for biomass; progress in Ontario; policies in Canada and Europe; and, towards a biofuels transportation infrastructure. The conference featured 34 presentations, of which 13 have been catalogued separately for inclusion in this database. refs., tabs., figs

Conference Proceedings: Meeting the challenge

International Nuclear Information System (INIS)

1998-01-01

New developments in the international energy sector were the central theme of this conference, with more than 20 speakers from around the world addressing issues regarding the integration and expansion of world oil and gas markets. The issue of mergers and acquisitions, especially in the U.S. downstream, also received considerable attention. The conference was organized into seven sessions. Session titles, denoting the topic of major interest in each case, were as follows: (1) the concept of a 'core' business in the petroleum and natural gas industry, (2) strategies to capture the upstream petroleum industry, (3) upstream technology for offshore applications, (4) upstream technology for onshore applications, (5) making business less risky, (6) natural gas as the key ingredient to future growth by the world's major oil and gas companies, and (7) the issue of geopolitics and how it continues to play a major role in the global energy markets. refs., tabs., figs

46 CFR 52.01-2 - Adoption of section I of the ASME Boiler and Pressure Vessel Code.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Adoption of section I of the ASME Boiler and Pressure...) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-2 Adoption of section I of the ASME Boiler and Pressure Vessel Code. (a) Main power boilers and auxiliary boilers shall be designed, constructed...

Conference Report: 18th Conference on Computer-Assisted Qualitative Data Analysis (CAQD) 2016: MAXQDA User Conference

OpenAIRE

Galan-Diaz, Carlos

2017-01-01

During the first week of March 2016, 120 researchers from 12 different countries, including Syria, Japan, the USA and Turkey, met in Berlin (Germany) to learn more about their computer-assisted qualitative data analysis skills. The 18th Conference on Computer-Assisted Qualitative Data Analysis (CAQD) offered several workshops, a research methods poster session, and the opportunity to share and discuss best practice between attendees, trainers and speakers (informally and through the user foru...

Proceedings of East Asia and Pacific area corrosion conference and expo: conference souvenir

International Nuclear Information System (INIS)

2011-01-01

The 19th annual conference being hosted by NACE International Gateway India Section (NIGIS) CORCON 2011 will feature technical symposia, interactive technical sessions and an expo. By promoting awareness and knowledge related to corrosion and its control through its educational programs and annual conferences, NIGIS reflects the mission and objectives of NACE International in India. The annual conference branded as 'CORCON', has emerged as the premier forum in India for Indian and overseas professionals wishing to interact on matters related to corrosion and its prevention. The technical symposia comprise a wide array of corrosion - related topics such as: Paints Coating and Lining, Materials and Composites, Inhibitors, MIC, Cathodic Protection, Failure Analysis, Inspection and Testing and covers sectors such as RCC and Infrastructure and Electric Power and Utilities. Papers relevant to INIS are indexed separately

2nd International Conference on Nuclear Physics in Astrophysics

CERN Document Server

Fülöp, Zsolt; Somorjai, Endre; The European Physical Journal A : Volume 27, Supplement 1, 2006

2006-01-01

Launched in 2004, "Nuclear Physics in Astrophysics" has established itself in a successful topical conference series addressing the forefront of research in the field. This volume contains the selected and refereed papers of the 2nd conference, held in Debrecen in 2005 and reprinted from "The European Physical Journal A - Hadrons and Nuclei".

3rd IEEE/IFToMM International Conference on Reconfigurable Mechanisms and Robots

CERN Document Server

Kong, Xianwen; Dai, Jian; ReMAR 2015; Advances in Reconfigurable Mechanisms and Robots II

2016-01-01

This book presents the most recent advances in the research and applications of reconfigurable mechanisms and robots. It collects 93 independently reviewed papers presented at the Third ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2015) held in Beijing, China, 20-22 July 2015. The conference papers are organized into seven parts to cover the reconfiguration theory, topology, kinematics and design of reconfigurable mechanisms including reconfigurable parallel mechanisms. The most recent results on reconfigurable robots are presented including their analysis, design, simulation and control. Bio-inspired mechanisms are also explored in the challenging fields of rehabilitation and minimally invasive surgery. This book further addresses deployable mechanisms and origami-inspired mechanisms and showcases a wide range of successful applications of reconfigurable mechanisms and robots. Advances in Reconfigurable Mechanisms and Robots II should be of interest for researchers, eng...

Estimates of the burst reliability of thin-walled cylinders designed to meet the ASME Code allowables

International Nuclear Information System (INIS)

Stancampiano, P.A.; Zemanick, P.P.

1976-01-01

Pressure containment components in nuclear power plants are designed by the conventional deterministic safety factor approach to meet the requirements of the ASME Pressure Vessel Code, Section III. The inevitable variabilities and uncertainties associated with the design, manufacture, installation, and service processes suggest a probabilistic design approach may also be pertinent. Accordingly, the burst reliabilities of two thin-walled 304 SS cylindrical vessels such as might be employed in liquid metal plants are estimated. A large vessel fabricated from rolled plate per ASME SA-240 and a smaller pipe sized vessel also fabricated from rolled plate per ASME SA-358 are considered. The vessels are sized to just meet the allowable ASME Code primary membrance stresses at 800 0 F (427 0 C). The bursting probability that the operating pressure is greater than the burst strength of the cylinders is calculated using stress-strength interference theory by direct Monte Carlo simulation on a high speed digital computer. A sensitivity study is employed to identify those design parameters which have the greatest effect on the reliability. The effects of preservice quality assurance defect inspections on the reliability are also evaluated parametrically

A Survey of Variable Extragalactic Sources with XTE's All Sky Monitor (ASM)

Science.gov (United States)

Jernigan, Garrett

1998-01-01

The original goal of the project was the near real-time detection of AGN utilizing the SSC 3 of the ASM on XTE which does a deep integration on one 100 square degree region of the sky. While the SSC never performed sufficiently well to allow the success of this goal, the work on the project has led to the development of a new analysis method for coded aperture systems which has now been applied to ASM data for mapping regions near clusters of galaxies such as the Perseus Cluster and the Coma Cluster. Publications are in preparation that describe both the new method and the results from mapping clusters of galaxies.

Assessment of induction elbows for an ASME Code application

International Nuclear Information System (INIS)

Panesar, J.S.; Soliman, M.

1991-01-01

The ASME Nuclear Codes impose some specific requirements on the wall thickness uniformity and the out-of-roundness of cross sections of the elbows for Nuclear Power Plant applications. Due to some of these requirements, manufacturing and installation of these elbows can be time consuming and quite expensive. This paper explores the feasibility of using induction elbows for nuclear application from the stress analysis point of view. To this end, three different sizes of 90deg elbows have been analyzed based on the geometry of an 'ASME Code' elbow and an elbow formed by induction bending. The analysis is carried out for internal pressure, in-plane and out-of-plane loads. Based on the results of these three carbon steel elbows, the use of induction elbows in some of the CANDU-PHW (CANadian Deuterium Uranium-Pressurized Heavy Water) power plant applications seems encouraging. However, before the feasibility can be fully confirmed analysis and induction bending tests over a wider range of geometries, loading conditions, and materials are required. (author)

PREFACE: International Scientific Conference of Young Scientists: Advanced Materials in Construction and Engineering (TSUAB2014)

Science.gov (United States)

Kopanitsa, Natalia O.

2015-01-01

In October 15-17, 2014 International Scientific Conference of Young Scientists: Advanced Materials in Construction and Engineering (TSUAB2014) took place at Tomsk State University of Architecture and Building (Tomsk, Russia). The Conference became a discussion platform for researchers in the fields of studying structure and properties of advanced building materials and included open lectures of leading scientists and oral presentations of master, postgraduate and doctoral students. A special session was devoted to reports of school children who further plan on starting a research career. The Conference included an industrial exhibition where companies displayed the products and services they supply. The companies also gave presentations of their products within the Conference sessions.

Fifth Australian conference on nuclear techniques of analysis : proceedings

International Nuclear Information System (INIS)

1987-11-01

The conference was divided into sessions on the following topics : environmental applications, archaeometry, instrumentation, materials science, industrial applications, surfaces, bioscience applications, geoscience and mining applications

Santa Fe Accelerator Conference

International Nuclear Information System (INIS)

Anon.

1983-01-01

The 10th USA National Particle Accelerator Conference was hosted this year by the Los Alamos National Laboratory in Santa Fe from 21-23 March. It was a resounding success in emphasizing the ferment of activity in the accelerator field. About 900 people registered and about 500 papers were presented in invited and contributed talks and poster sessions

1999 Gordon Research Conference on Mammalian DNA Repair. Final Progress Report

International Nuclear Information System (INIS)

NONE

1999-01-01

This Conference will examine DNA repair as the key component in genomic surveillance that is so crucial to the overall integrity and function of mammalian cells. Recent discoveries have catapulted the field of DNA repair into a pivotal position for fundamental investigations into oncology, aging, environmental health, and developmental biology. We hope to highlight the most promising and exciting avenues of research in robust discussions at this conference. This Mammalian DNA Repair Gordon Conference differs from the past conferences in this series, in which the programs were broader in scope, with respect to topics and biological systems covered. A conference sponsored by the Genetics Society in April 1998 emphasized recombinational mechanisms for double-strand break repair and the role of mismatch repair deficiency in colorectal cancer. These topics will therefore receive somewhat less emphasis in the upcoming Conference. In view of the recent mechanistic advances in mammalian DNA repair, an upcoming comprehensive DNA repair meeting next autumn at Hilton Head; and the limited enrollment for Gordon Conferences we have decided to focus session-by-session on particular areas of controversy and/or new developments specifically in mammalian systems. Thus, the principal presentations will draw upon results from other cellular systems only to the extent that they impact our understanding of mammalian DNA repair

1999 Gordon Research Conference on Mammalian DNA Repair. Final Progress Report

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-12

This Conference will examine DNA repair as the key component in genomic surveillance that is so crucial to the overall integrity and function of mammalian cells. Recent discoveries have catapulted the field of DNA repair into a pivotal position for fundamental investigations into oncology, aging, environmental health, and developmental biology. We hope to highlight the most promising and exciting avenues of research in robust discussions at this conference. This Mammalian DNA Repair Gordon Conference differs from the past conferences in this series, in which the programs were broader in scope, with respect to topics and biological systems covered. A conference sponsored by the Genetics Society in April 1998 emphasized recombinational mechanisms for double-strand break repair and the role of mismatch repair deficiency in colorectal cancer. These topics will therefore receive somewhat less emphasis in the upcoming Conference. In view of the recent mechanistic advances in mammalian DNA repair, an upcoming comprehensive DNA repair meeting next autumn at Hilton Head; and the limited enrollment for Gordon Conferences we have decided to focus session-by-session on particular areas of controversy and/or new developments specifically in mammalian systems. Thus, the principal presentations will draw upon results from other cellular systems only to the extent that they impact our understanding of mammalian DNA repair.

International Conference SES 2006. Secure Energy Supply

International Nuclear Information System (INIS)

2006-01-01

The International Conference SES 2006 (Secure Energy Supply, Bezpecna dodavka energie) was realised in Bratislava, during September 26 - 29, 2006 in the hotel Crowne Plaza and deals with most important problems of world and Slovak energetics. In work of Conference took part 108 slovak and 33 foreign participant from 11 countries of the world. Negotiations were realised in five sessions. First two days were devoted to lectures and second two days were visits of selected slovak energetic equipment. On the Conference has resounded matter of fact, that secure energy supply is extremely important subject for economy, but also for population

Utilização de Ecolife® e Acibenzolar-s-metil (ASM no controle da antracnose da banana em pós-colheita Use of Ecolife® and Acibenzolar-S-metil (ASM on the control of antracnosis in banana post-harvest

Directory of Open Access Journals (Sweden)

Luciano Marinho Furtado

2010-09-01

Full Text Available O objetivo deste trabalho foi avaliar a ação dos produtos ASM e Ecolife no controle da antracnose pós-colheita em frutos de banana. Frutos sadios de banana, variedades maçã, prata, pacovan e cacau , em fase intermediária de maturação, foram imersos previamente em soluções de ASM e Ecolife e inoculados com Colletotrichum musae. Utilizou-se o delineamento inteiramente casualizado, em esquema fatorial com quatro repetições. Os resultados apresentados demonstraram a eficácia dos produtos nas concentrações de 5 ml/ L (Ecolife e 0,50g/ L (ASM no controle da antracnose nas variedades analisa das. A variedade cacau apresentou menor lesão quando tratada com o Ecolife (5,79 mm. Com relação ao efeito do ASM, a bana na prata demonstrou um melhor resultado, com tamanho médio de lesão de 5,62 mm. Com o decorrer do processo de maturação dos frutos houve um decréscimo na severidade da doença nas quatro variedades estudadas, exceto no tratamento testemunha, que continuou apresentando aumento no tamanho das lesões nos frutos e atingir a polpa ao final da maturação.The aim of this work was to evaluate the effects of ASM and Ecolife on the control of post-harvest antracnosis in banana. Banana fruits of Maçã, Prata, Pacovan and Figo varieties, at intermediate stage of maturation, were immersed in solutions of ASM and Ecolife and inoculated with Colletotrichum musae A completely randomized design was used, at a factorial scheme 4x2 (four varieties x two products with four replicates. The presented results demonstrated the susceptibility of the fruits to the disease, mainly Maça variety with lesion of 17,99 mm. It was demosntrated the effectiveness of products at concentrations of 5ml. L-1 (Ecolife and 0.50g. L-1 (ASM on antracnosis control. The Figo variety presented the smallest injuries when treated with Ecolife (5.79 mm. Regarding ASM effects, Prata variety demonstrated the best performance, with 5.62 mm of injuries diameter

Conference scene: Summary of the 6th Conference of the Romanian Association of Medical Laboratories with international participation.

Science.gov (United States)

Carasevici, Eugen

2011-10-01

The Romanian Association of Medical Laboratories (RAML) conferences have acquired a reputation for standing out as the most prominent and efficient meetings in the national community of laboratory medicine, being a landmark of the development in this field in Romania and an active affiliation to international forums. This year, the conference setting was Piatra Neamt, in the northeast part of Romania, which produced a friendly and stimulating professional environment. As in previous years, leading experts in the fields of laboratory medicine attended the event. This year, we enjoyed the opportunity to have such distinguished guests as the members of the executive board of International Federation of Clinical Chemistry and Laboratory Medicine (IFCC); Graham Beastall, IFCC President; Päivi Hannele Laitinen, IFCC secretary; and Grazyna Sypniewska, IFCC Communication and Publication Division, and editor of the electronic journal of the IFCC. As usual, the conference program included all aspects of clinical laboratory activity, with a special focus on technology development, instrumentation and laboratory management. Fully aware of the fact that the complexity and depth of laboratory practice have undergone an impressive and rapid evolution, the specific goals of the event were to increase knowledge in the fundamentals of new molecular investigation, areas which show the tendency to become routine in our daily activity. In addition, laboratory management and the place of medical laboratories in the process of translational medicine were subjects of focus. The 6th Conference of the Romanian Association of Medical Laboratories was held from Wednesday 1st to Saturday 4th of June 2011. A total of 273 participants from all local branches of the Association attended. The scientific program included seven plenary sessions where 22 lectures and 18 short communications were delivered, and three poster sessions with 44 poster presentations. Session topics covered issues of

38th International Conference on High Energy Physics

CERN Document Server

2016-01-01

The U.S. particle physics community is proud to host the 38th ICHEP conference in Chicago from the 3rd to the 10th August 2016. ICHEP is a focal point of the field of particle physics, brining together leading experimentalists and theorists of the world. It was first held in 1950, and is biennial since 1960. At ICHEP all areas of particle physics including neutrino, flavor, astro-particle and new physics beyond the Standard Model share the exciting results obtained in the field and exchange views among all experimental and theoretical scientists of the world including students and postodcs. The conference will consist of parallel and invited plenary sessions. A poster session will emphasize the work of young students.

International conference on theoretical approaches to heavy ion reaction mechanisms. Proceedings

International Nuclear Information System (INIS)

Lepage, F.

1984-01-01

This booklet contains copies of the short written contributions to the Paris Conference (14-18 May 1984). Some of the authors have wished to present it orally in a special session. Its program will be found in the proceedings of the Conference published by Nuclear Physics

The 36th JAIF annual conference

International Nuclear Information System (INIS)

2003-01-01

The conference was opened in two places of Tsuruga Citizen Culture Center and Phoenix Plaza in Fukui, Japan, from April 15 to 17, 2003. The main theme was seeking better public understanding-for the future nuclear development. It consisted of two opening sessions, three special presentations, four sessions such as 'Sustainable development of human society: challenges in terms of the environment and energy', 'Improved operations and maintenance of nuclear power plants: new challenges', 'Advancing global programs for high-level radioactive waste disposal' and 'Here is Fukui: let us think about nuclear energy and radiation used in our daily life', of which 2 to 4 were panel discussion, public dialog, luncheon, gathering to answer to questions from the citizens and picture story show on nuclear energy played by women's energy network of Fukui prefecture. 19 speakers, 8 commentators and 17 panelists sat in the conference. (S.Y.)

Conference Report: 18th Conference on Computer-Assisted Qualitative Data Analysis (CAQD 2016: MAXQDA User Conference

Directory of Open Access Journals (Sweden)

Carlos Galan-Diaz

2017-01-01

Full Text Available During the first week of March 2016, 120 researchers from 12 different countries, including Syria, Japan, the USA and Turkey, met in Berlin (Germany to learn more about their computer-assisted qualitative data analysis skills. The 18th Conference on Computer-Assisted Qualitative Data Analysis (CAQD offered several workshops, a research methods poster session, and the opportunity to share and discuss best practice between attendees, trainers and speakers (informally and through the user forum. The conference also hosted three seminal keynote speakers in two presentations: John CRESWELL, and Udo KUCKARTZ and Stefan RÄDIKER, who shared, respectively, the state of the art of mixed methods and the ways that software can support these approaches. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs170146

Recommendations to ASME for code guidelines and criteria for continued operation of equipment

International Nuclear Information System (INIS)

Harvey, J.F.

1993-01-01

In May 1988, the American Society of Mechanical Engineers, ASME, asked the Pressure Vessel Research Council, PVRC, to review the part it should play in the continued operation of equipment originally designed and fabricated to the ASME codes and rules. This was prompted solely by an economic opportunity in which the capital expenditures to replace plants was far more costly than evaluating, repairing, and extending the nominal design life of the individual component. For instance, nuclear plants are normally designed for a life of 40 years, while fossil fired facilities may have been designed for other time lives, yet at the end of their original design life may actually have many useful years remaining. While this action was economically prompted, it inherently involved a two-fold one; namely, (1) safety, (2) legal. There is no question of safety to operating personnel. While codes for fossil components do not specify design lives, their adoption by many states provides a legal means of procedure in event of a mishap. This recognizes a cradle-to-grave safety responsibility. It is toward maintaining ASMEs leadership as a code authority that this report has been prepared

29 CFR Appendix A to Subpart S of... - References for Further Information

Science.gov (United States)

2010-07-01

.... ANSI/ASME B30.8-2004 Floating Cranes And Floating Derricks. ANSI/ASME B30.11-2004 Monorails And... Different Bases. NFPA 20-2003 Standard for the Installation of Stationary Pumps for Fire Protection. NFPA 30...-2004.) NFPA 77-2000 Recommended Practice on Static Electricity. NFPA 80-1999 Standard for Fire Doors...

6. CNS international conference on CANDU maintenance. Proceedings

International Nuclear Information System (INIS)

2003-01-01

The 6th CNS International Conference on CANDU Maintenance took place in Toronto, Ontario on November 16-18, 2003. The theme for the conference was 'Maintenance for Life'. About 270 delegates attended the conference held by the Canadian Nuclear Society. The conference consisted of four parallel sessions, a pattern that continued throughout the conference. Papers were grouped under the following headings: Fuel Channels and End Fittings - Assessments; Fuel Channels and End Fittings - Inspections; Fuel Channels and End Fittings - Maintenance; Fuel Channels and End Fittings - Universal Delivery Machine; Water Upgrading; Performance and Plant Life Improvement; Steam Generator Life Management; Steam Generator Modifications; Steam Generators - Inspections; Steam Generators - Assessments; Maintenance Programs; Feeder Inspections; Feeder Assessment and Mitigation; Valve Maintenance; Instrumentation and Control; Inspection Technology; and Fuel Handling

10th Australian conference on nuclear techniques of analysis. Proceedings

International Nuclear Information System (INIS)

1998-01-01

These proceedings contains abstracts and extended abstracts of 80 lectures and posters presented at the 10th Australian conference on nuclear techniques of analysis hosted by the Australian National University in Canberra, Australia from 24-26 of November 1997. The conference was divided into sessions on the following topics : ion beam analysis and its applications; surface science; novel nuclear techniques of analysis, characterization of thin films, electronic and optoelectronic material formed by ion implantation, nanometre science and technology, plasma science and technology. A special session was dedicated to new nuclear techniques of analysis, future trends and developments. Separate abstracts were prepared for the individual presentation included in this volume

10th Australian conference on nuclear techniques of analysis. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

These proceedings contains abstracts and extended abstracts of 80 lectures and posters presented at the 10th Australian conference on nuclear techniques of analysis hosted by the Australian National University in Canberra, Australia from 24-26 of November 1997. The conference was divided into sessions on the following topics : ion beam analysis and its applications; surface science; novel nuclear techniques of analysis, characterization of thin films, electronic and optoelectronic material formed by ion implantation, nanometre science and technology, plasma science and technology. A special session was dedicated to new nuclear techniques of analysis, future trends and developments. Separate abstracts were prepared for the individual presentation included in this volume.

6TH International Crimean Conference, Microwave and Telecommunication Technology

National Research Council Canada - National Science Library

1996-01-01

.... The Military historical session of the conference presented the papers dealing with the history of creation and development of satellite communication and navigation systems and radiolocation media...

ASM Based Synthesis of Handwritten Arabic Text Pages

Directory of Open Access Journals (Sweden)

Laslo Dinges

2015-01-01

Full Text Available Document analysis tasks, as text recognition, word spotting, or segmentation, are highly dependent on comprehensive and suitable databases for training and validation. However their generation is expensive in sense of labor and time. As a matter of fact, there is a lack of such databases, which complicates research and development. This is especially true for the case of Arabic handwriting recognition, that involves different preprocessing, segmentation, and recognition methods, which have individual demands on samples and ground truth. To bypass this problem, we present an efficient system that automatically turns Arabic Unicode text into synthetic images of handwritten documents and detailed ground truth. Active Shape Models (ASMs based on 28046 online samples were used for character synthesis and statistical properties were extracted from the IESK-arDB database to simulate baselines and word slant or skew. In the synthesis step ASM based representations are composed to words and text pages, smoothed by B-Spline interpolation and rendered considering writing speed and pen characteristics. Finally, we use the synthetic data to validate a segmentation method. An experimental comparison with the IESK-arDB database encourages to train and test document analysis related methods on synthetic samples, whenever no sufficient natural ground truthed data is available.

ASM Based Synthesis of Handwritten Arabic Text Pages.

Science.gov (United States)

Dinges, Laslo; Al-Hamadi, Ayoub; Elzobi, Moftah; El-Etriby, Sherif; Ghoneim, Ahmed

2015-01-01

Document analysis tasks, as text recognition, word spotting, or segmentation, are highly dependent on comprehensive and suitable databases for training and validation. However their generation is expensive in sense of labor and time. As a matter of fact, there is a lack of such databases, which complicates research and development. This is especially true for the case of Arabic handwriting recognition, that involves different preprocessing, segmentation, and recognition methods, which have individual demands on samples and ground truth. To bypass this problem, we present an efficient system that automatically turns Arabic Unicode text into synthetic images of handwritten documents and detailed ground truth. Active Shape Models (ASMs) based on 28046 online samples were used for character synthesis and statistical properties were extracted from the IESK-arDB database to simulate baselines and word slant or skew. In the synthesis step ASM based representations are composed to words and text pages, smoothed by B-Spline interpolation and rendered considering writing speed and pen characteristics. Finally, we use the synthetic data to validate a segmentation method. An experimental comparison with the IESK-arDB database encourages to train and test document analysis related methods on synthetic samples, whenever no sufficient natural ground truthed data is available.

46 CFR 56.01-2 - Incorporation by reference.

Science.gov (United States)

2010-10-01

... Welded Ferritic and Martensitic Stainless Steel Tubing for General Service (“ASTM A 268”), 56.60-1; (21) ASTM A 276-98, Standard Specification for Stainless Steel Bars and Shapes (“ASTM A 276”), 56.60-2; (22... (27) ASME B36.19M-2004 Stainless Steel Pipe (2004) (“ASME B36.19M”), 56.07-5; 56.60-1. (28) ASME SA...

Towards a consensus-based biokinetic model for green microalgae – The ASM-A

DEFF Research Database (Denmark)

Wágner, Dorottya Sarolta; Valverde Pérez, Borja; Sæbø, Mariann

2016-01-01

developed to predict microalgal growth. However, none of these models can effectively describe all the relevant processes when microalgal growth is coupled with nutrient removal and recovery from wastewaters. Here, we present a mathematical model developed to simulate green microalgal growth (ASM-A) using...... and substrate availability can introduce significant variability on parameter values for predicting the reaction rates for bulk nitrate and the intracellularly stored nitrogen state-variables, thereby requiring scenario specific model calibration. ASM-A was identified using standard cultivation medium...

Proceedings of the cold climate construction conference and expo

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

This conference provided a forum to present innovative technologies in engineering, construction, energy efficiency, workforce productivity and several other aspects affecting cold regions. The session on winter construction featured tools techniques and technologies that maximize winter construction, with reference to the latest in cold weather construction techniques and lessons learned from the far north and south. It featured lessons on building on ice, frozen ground and permafrost. The session on sustainability addressed issues regarding sustainable design; solar, wind and geothermal systems; building envelopes that work in cold climates; and energy efficient products and techniques. The session on workforce productivity presented methods to keep the workforce warm and healthy in cold conditions; attracting and preparing foreign workers for the far north; worker productivity in a cold environment; tools, techniques and clothing to minimize the effects of cold weather; and cold weather equipment operations. Three presentations from the conference have been catalogued separately for inclusion in this database. refs., tabs., figs.

International Joint Conference SOCO’14-CISIS’14-ICEUTE’14

CERN Document Server

Ferreira, Iván; Bringas, Pablo; Klett, Fanny; Abraham, Ajith; Carvalho, André; Herrero, Álvaro; Baruque, Bruno; Quintián, Héctor; Corchado, Emilio

2014-01-01

This volume of Advances in Intelligent and Soft Computing contains accepted papers presented at SOCO 2014, CISIS 2014 and ICEUTE 2014, all conferences held in the beautiful and historic city of Bilbao (Spain), in June 2014. Soft computing represents a collection or set of computational techniques in machine learning, computer science and some engineering disciplines, which investigate, simulate, and analyze very complex issues and phenomena.   After a through peer-review process, the 9th SOCO 2014 International Program Committee selected 31 papers which are published in these conference proceedings. In this relevant edition a special emphasis was put on the organization of special sessions. One special session was organized related to relevant topics as: Soft Computing Methods in Manufacturing and Management Systems.   The aim of the 7th CISIS 2014 conference is to offer a meeting opportunity for academic and industry-related researchers belonging to the various, vast communities of Computational Intelligen...

7th Rochester Conference on Coherence and Quantum Optics

CERN Document Server

Mandel, Leonard; Wolf, Emil

1996-01-01

The Seventh Rochester Conference on Coherence and Quantum Optics was held on the campus of the University of Rochester during the four-day period June 7 - 10, 1996. More than 280 scientists from 33 countries participated. This book contains the Proceedings of the meeting. This Conference differed from the previous six in the series in having only a limited number of oral presentations, in order to avoid too many parallel sessions. Another new feature was the introduction of tutorial lectures. Most contributed papers were presented in poster sessions. The Conference was sponsored by the American Physical Society, by the Optical Society of America, by the International Union of Pure and Applied Physics and by the University of Rochester. We wish to express our appreciation to these organizations for their support and we especially extend our thanks to the International Union of Pure and Applied Physics for providing financial assistance to a number of speakers from Third World countries, to enable them to take ...

Application of adjusted subpixel method (ASM) in HRCT measurements of the bronchi in bronchial asthma patients and healthy individuals.

Science.gov (United States)

Mincewicz, Grzegorz; Rumiński, Jacek; Krzykowski, Grzegorz

2012-02-01

Recently, we described a model system which included corrections of high-resolution computed tomography (HRCT) bronchial measurements based on the adjusted subpixel method (ASM). To verify the clinical application of ASM by comparing bronchial measurements obtained by means of the traditional eye-driven method, subpixel method alone and ASM in a group comprised of bronchial asthma patients and healthy individuals. The study included 30 bronchial asthma patients and the control group comprised of 20 volunteers with no symptoms of asthma. The lowest internal and external diameters of the bronchial cross-sections (ID and ED) and their derivative parameters were determined in HRCT scans using: (1) traditional eye-driven method, (2) subpixel technique, and (3) ASM. In the case of the eye-driven method, lower ID values along with lower bronchial lumen area and its percentage ratio to total bronchial area were basic parameters that differed between asthma patients and healthy controls. In the case of the subpixel method and ASM, both groups were not significantly different in terms of ID. Significant differences were observed in values of ED and total bronchial area with both parameters being significantly higher in asthma patients. Compared to ASM, the eye-driven method overstated the values of ID and ED by about 30% and 10% respectively, while understating bronchial wall thickness by about 18%. Results obtained in this study suggest that the traditional eye-driven method of HRCT-based measurement of bronchial tree components probably overstates the degree of bronchial patency in asthma patients. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Application of adjusted subpixel method (ASM) in HRCT measurements of the bronchi in bronchial asthma patients and healthy individuals

International Nuclear Information System (INIS)

Mincewicz, Grzegorz; Rumiński, Jacek; Krzykowski, Grzegorz

2012-01-01

Background: Recently, we described a model system which included corrections of high-resolution computed tomography (HRCT) bronchial measurements based on the adjusted subpixel method (ASM). Objective: To verify the clinical application of ASM by comparing bronchial measurements obtained by means of the traditional eye-driven method, subpixel method alone and ASM in a group comprised of bronchial asthma patients and healthy individuals. Methods: The study included 30 bronchial asthma patients and the control group comprised of 20 volunteers with no symptoms of asthma. The lowest internal and external diameters of the bronchial cross-sections (ID and ED) and their derivative parameters were determined in HRCT scans using: (1) traditional eye-driven method, (2) subpixel technique, and (3) ASM. Results: In the case of the eye-driven method, lower ID values along with lower bronchial lumen area and its percentage ratio to total bronchial area were basic parameters that differed between asthma patients and healthy controls. In the case of the subpixel method and ASM, both groups were not significantly different in terms of ID. Significant differences were observed in values of ED and total bronchial area with both parameters being significantly higher in asthma patients. Compared to ASM, the eye-driven method overstated the values of ID and ED by about 30% and 10% respectively, while understating bronchial wall thickness by about 18%. Conclusions: Results obtained in this study suggest that the traditional eye-driven method of HRCT-based measurement of bronchial tree components probably overstates the degree of bronchial patency in asthma patients.

Feature extraction for face recognition via Active Shape Model (ASM) and Active Appearance Model (AAM)

Science.gov (United States)

Iqtait, M.; Mohamad, F. S.; Mamat, M.

2018-03-01

Biometric is a pattern recognition system which is used for automatic recognition of persons based on characteristics and features of an individual. Face recognition with high recognition rate is still a challenging task and usually accomplished in three phases consisting of face detection, feature extraction, and expression classification. Precise and strong location of trait point is a complicated and difficult issue in face recognition. Cootes proposed a Multi Resolution Active Shape Models (ASM) algorithm, which could extract specified shape accurately and efficiently. Furthermore, as the improvement of ASM, Active Appearance Models algorithm (AAM) is proposed to extracts both shape and texture of specified object simultaneously. In this paper we give more details about the two algorithms and give the results of experiments, testing their performance on one dataset of faces. We found that the ASM is faster and gains more accurate trait point location than the AAM, but the AAM gains a better match to the texture.

Third International Fuel Cell Conference. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-30

The Third International Fuel Cell Conference was held on November 30 to December 3, 1999 in City of Nagoya. A total of 139 papers, including those for plenary, sectional and poster cessions, were presented. In the plenary session, US's DOE presented fuel cell power plant development in the United States, EC fuel cells in perspective and fifth European framework programme, and Japan overview of the New Sunshine Program. In the polymer electrolyte fuel cells sessions, 23 papers were presented, including current status of commercialization and PEMFC systems developed by Toshiba. In the phosphoric acid fuel cells session, 6 papers were presented, including field test results and market developments. In the molten carbonate fuel cells session, 24 papers were presented, including development of 1,000kW MCFC power plant. In the solid oxide fuel cells session, 20 papers were presented, including 100kW SOFC field test results. The other topics include market analysis and fuel processes. (NEDO)

Third International Fuel Cell Conference. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-30

The Third International Fuel Cell Conference was held on November 30 to December 3, 1999 in City of Nagoya. A total of 139 papers, including those for plenary, sectional and poster cessions, were presented. In the plenary session, US's DOE presented fuel cell power plant development in the United States, EC fuel cells in perspective and fifth European framework programme, and Japan overview of the New Sunshine Program. In the polymer electrolyte fuel cells sessions, 23 papers were presented, including current status of commercialization and PEMFC systems developed by Toshiba. In the phosphoric acid fuel cells session, 6 papers were presented, including field test results and market developments. In the molten carbonate fuel cells session, 24 papers were presented, including development of 1,000kW MCFC power plant. In the solid oxide fuel cells session, 20 papers were presented, including 100kW SOFC field test results. The other topics include market analysis and fuel processes. (NEDO)

Proceedings of the 8th Nordic Combinatorial Conference

DEFF Research Database (Denmark)

Geil, Olav; Andersen, Lars Døvling

The Nordic Combinatorial Conferences were initiated in 1981 by mathematicians from Stavanger. Held approximately every three years since then, the conferences have been able to sustain the interest from combinatorialists all over the Nordic countries. In 2004 the 8th conference is held in Aalborg......, Denmark. We are pleased that so many people have chosen to attend, and that lectures were offered from more participants than we had originally reserved time for. We asked two mathematicians to give special lectures and are happy that both accepted immediately. Andries Brouwer from the Technical...

2006 annual nuclear technology conference Aachen

International Nuclear Information System (INIS)

Anon.

2006-01-01

This year's ANNUAL NUCLEAR TECHNOLOGY CONFERENCE (JK) was organized in Aachen by the Deutsches Atomforum e.V. (DAtF) and the Kerntechnische Gesellschaft e.V. (KTG). The attendance by more than 1,200 participants from 17 nations underlines the role of this specialized congress as one of the leading events in the field of nuclear power use. For several years in a row, the number of participants has been increasing steadily. The first conference day offered plenary presentations traditionally dealing mainly with political and economic issues of the use of nuclear power, including a presentation by the President of the DAtF. The lead countries of JK 2006 were Belgium and Finland with contributions to the plenary day and special meetings on selected topics. The traditional proven scheme of the three-day meeting offered plenary sessions on the first day, and technical sessions, topical sessions, poster sessions, and special events on the following days. The 'Nuclear Power Campus' was run most successfully for the fourth time, presenting to high school students and university freshmen the world of nuclear power in a transparent way. The special commitment to the young generation was stressed at JK 2006 also by the 'Competence Preservation in Nuclear Technology' workshop. Nearly 2 dozen young scientists used the forum to present results of their work. The meeting was accompanied by a technical exhibition with meeting points established by vendors, suppliers, and service providers. (orig.)

Trends in National Emergency Medicine Conference Didactic Lectures Over a 6-Year Period.

Science.gov (United States)

Gottlieb, Michael; Riddell, Jeff; Njie, Abdoulie

2017-01-01

National conference didactic lectures have traditionally featured hour-long lecture-based presentations. However, there is evidence that longer lectures can lead to both decreased attention and retention of information. The authors sought to identify trends in lecture duration, lecture types, and number of speakers at four national emergency medicine (EM) conferences over a 6-year period. The authors performed a retrospective analysis of the length, number of speakers, and format of didactic lectures at four different national EM conferences over 6 years. The authors abstracted data from the national academic assemblies for the four largest not-for-profit EM organizations in the United States: American Academy of Emergency Medicine, American College of Emergency Physicians, Council of Emergency Medicine Residency Directors, and Society for Academic Emergency Medicine. There was a significant yearly decrease in the mean lecture lengths for three of the four conferences. There was an increase in the percentage of rapid fire sessions over the preceding 2 years with a corresponding decrease in the percentage of general educational sessions. There was no significant difference in the mean number of speakers per lecture. An analysis of 4210 didactic lecture sessions from the annual meetings of four national EM organizations over a 6-year period showed significant decreases in mean lecture length. These findings can help to guide EM continuing medical education conference planning and research.

3D automatic anatomy segmentation based on iterative graph-cut-ASM.

Science.gov (United States)

Chen, Xinjian; Bagci, Ulas

2011-08-01

This paper studies the feasibility of developing an automatic anatomy segmentation (AAS) system in clinical radiology and demonstrates its operation on clinical 3D images. The AAS system, the authors are developing consists of two main parts: object recognition and object delineation. As for recognition, a hierarchical 3D scale-based multiobject method is used for the multiobject recognition task, which incorporates intensity weighted ball-scale (b-scale) information into the active shape model (ASM). For object delineation, an iterative graph-cut-ASM (IGCASM) algorithm is proposed, which effectively combines the rich statistical shape information embodied in ASM with the globally optimal delineation capability of the GC method. The presented IGCASM algorithm is a 3D generalization of the 2D GC-ASM method that they proposed previously in Chen et al. [Proc. SPIE, 7259, 72590C1-72590C-8 (2009)]. The proposed methods are tested on two datasets comprised of images obtained from 20 patients (10 male and 10 female) of clinical abdominal CT scans, and 11 foot magnetic resonance imaging (MRI) scans. The test is for four organs (liver, left and right kidneys, and spleen) segmentation, five foot bones (calcaneus, tibia, cuboid, talus, and navicular). The recognition and delineation accuracies were evaluated separately. The recognition accuracy was evaluated in terms of translation, rotation, and scale (size) error. The delineation accuracy was evaluated in terms of true and false positive volume fractions (TPVF, FPVF). The efficiency of the delineation method was also evaluated on an Intel Pentium IV PC with a 3.4 GHZ CPU machine. The recognition accuracies in terms of translation, rotation, and scale error over all organs are about 8 mm, 10 degrees and 0.03, and over all foot bones are about 3.5709 mm, 0.35 degrees and 0.025, respectively. The accuracy of delineation over all organs for all subjects as expressed in TPVF and FPVF is 93.01% and 0.22%, and all foot bones for

3D automatic anatomy segmentation based on iterative graph-cut-ASM

International Nuclear Information System (INIS)

Chen, Xinjian; Bagci, Ulas

2011-01-01

Purpose: This paper studies the feasibility of developing an automatic anatomy segmentation (AAS) system in clinical radiology and demonstrates its operation on clinical 3D images. Methods: The AAS system, the authors are developing consists of two main parts: object recognition and object delineation. As for recognition, a hierarchical 3D scale-based multiobject method is used for the multiobject recognition task, which incorporates intensity weighted ball-scale (b-scale) information into the active shape model (ASM). For object delineation, an iterative graph-cut-ASM (IGCASM) algorithm is proposed, which effectively combines the rich statistical shape information embodied in ASM with the globally optimal delineation capability of the GC method. The presented IGCASM algorithm is a 3D generalization of the 2D GC-ASM method that they proposed previously in Chen et al.[Proc. SPIE, 7259, 72590C1-72590C-8 (2009)]. The proposed methods are tested on two datasets comprised of images obtained from 20 patients (10 male and 10 female) of clinical abdominal CT scans, and 11 foot magnetic resonance imaging (MRI) scans. The test is for four organs (liver, left and right kidneys, and spleen) segmentation, five foot bones (calcaneus, tibia, cuboid, talus, and navicular). The recognition and delineation accuracies were evaluated separately. The recognition accuracy was evaluated in terms of translation, rotation, and scale (size) error. The delineation accuracy was evaluated in terms of true and false positive volume fractions (TPVF, FPVF). The efficiency of the delineation method was also evaluated on an Intel Pentium IV PC with a 3.4 GHZ CPU machine. Results: The recognition accuracies in terms of translation, rotation, and scale error over all organs are about 8 mm, 10 deg. and 0.03, and over all foot bones are about 3.5709 mm, 0.35 deg. and 0.025, respectively. The accuracy of delineation over all organs for all subjects as expressed in TPVF and FPVF is 93.01% and 0.22%, and

Research on English Teaching and Learning: Taiwan (2004-2009)