Conceptual Modeling Framework for E-Area PA HELP Infiltration Model Simulations

Energy Technology Data Exchange (ETDEWEB)

Dyer, J. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-11-30

A conceptual modeling framework based on the proposed E-Area Low-Level Waste Facility (LLWF) closure cap design is presented for conducting Hydrologic Evaluation of Landfill Performance (HELP) model simulations of intact and subsided cap infiltration scenarios for the next E-Area Performance Assessment (PA).

Mass discharge estimation from contaminated sites: Multi-model solutions for assessment of conceptual uncertainty

Science.gov (United States)

Thomsen, N. I.; Troldborg, M.; McKnight, U. S.; Binning, P. J.; Bjerg, P. L.

2012-04-01

Mass discharge estimates are increasingly being used in the management of contaminated sites. Such estimates have proven useful for supporting decisions related to the prioritization of contaminated sites in a groundwater catchment. Potential management options can be categorised as follows: (1) leave as is, (2) clean up, or (3) further investigation needed. However, mass discharge estimates are often very uncertain, which may hamper the management decisions. If option 1 is incorrectly chosen soil and water quality will decrease, threatening or destroying drinking water resources. The risk of choosing option 2 is to spend money on remediating a site that does not pose a problem. Choosing option 3 will often be safest, but may not be the optimal economic solution. Quantification of the uncertainty in mass discharge estimates can therefore greatly improve the foundation for selecting the appropriate management option. The uncertainty of mass discharge estimates depends greatly on the extent of the site characterization. A good approach for uncertainty estimation will be flexible with respect to the investigation level, and account for both parameter and conceptual model uncertainty. We propose a method for quantifying the uncertainty of dynamic mass discharge estimates from contaminant point sources on the local scale. The method considers both parameter and conceptual uncertainty through a multi-model approach. The multi-model approach evaluates multiple conceptual models for the same site. The different conceptual models consider different source characterizations and hydrogeological descriptions. The idea is to include a set of essentially different conceptual models where each model is believed to be realistic representation of the given site, based on the current level of information. Parameter uncertainty is quantified using Monte Carlo simulations. For each conceptual model we calculate a transient mass discharge estimate with uncertainty bounds resulting from

The structure of conceptual models with application to the Aespoe HRL project

International Nuclear Information System (INIS)

Olsson, Olle; Baeckblom, G.; Wikberg, P.; Gustafson, G.; Stanfors, R.

1994-05-01

In performance assessment a sequence of models is used to describe the function of the geological barrier. This report proposes a general structure and terminology for description of these models. A model description consists of the following components: A conceptual model which defines the geometric framework in which the problem is solved, the dimensions of the modelled volume, descriptions of the processes included in the model, and the boundary conditions; Data which are introduced into the conceptual model, and a mathematical or numerical tool used to produce output data. Contradictory to common practice in geohydrologic modelling it is proposed that the term conceptual model is restricted to define in what way the model is constructed, and that this is separated from any specific application of the conceptual model. Hence, the conceptual model should not include any specific data. 5 refs, 2 figs, 4 tabs

Event-Based Conceptual Modeling

DEFF Research Database (Denmark)

Bækgaard, Lars

2009-01-01

The purpose of the paper is to obtain insight into and provide practical advice for event-based conceptual modeling. We analyze a set of event concepts and use the results to formulate a conceptual event model that is used to identify guidelines for creation of dynamic process models and static...... information models. We characterize events as short-duration processes that have participants, consequences, and properties, and that may be modeled in terms of information structures. The conceptual event model is used to characterize a variety of event concepts and it is used to illustrate how events can...... be used to integrate dynamic modeling of processes and static modeling of information structures. The results are unique in the sense that no other general event concept has been used to unify a similar broad variety of seemingly incompatible event concepts. The general event concept can be used...

A Conceptual Model for Assessing Quality of Care for Patients Boarding in the Emergency Department: Structure-Process-Outcome

Science.gov (United States)

Liu, Shan W.; Singer, Sara J.; Sun, Benjamin C.; Camargo, Carlos A.

2013-01-01

Many believe that the “boarding” of emergency department (ED) patients awaiting inpatient beds compromises quality of care. To better study the quality of care of boarded patients, one should identify and understand the mechanisms accounting for any potential differences in care. This paper present a conceptual boarding “structure-process-outcome” model to help assess quality of care provided to boarded patients, and to aid in recognizing potential solutions to improve that quality, if it is deficient. The goal of the conceptual model is to create a practical framework on which a research and policy agenda can be based to measure and improve quality of care for boarded patients. PMID:21496148

Assessing the relative importance of parameter and forcing uncertainty and their interactions in conceptual hydrological model simulations

Science.gov (United States)

Mockler, E. M.; Chun, K. P.; Sapriza-Azuri, G.; Bruen, M.; Wheater, H. S.

2016-11-01

Predictions of river flow dynamics provide vital information for many aspects of water management including water resource planning, climate adaptation, and flood and drought assessments. Many of the subjective choices that modellers make including model and criteria selection can have a significant impact on the magnitude and distribution of the output uncertainty. Hydrological modellers are tasked with understanding and minimising the uncertainty surrounding streamflow predictions before communicating the overall uncertainty to decision makers. Parameter uncertainty in conceptual rainfall-runoff models has been widely investigated, and model structural uncertainty and forcing data have been receiving increasing attention. This study aimed to assess uncertainties in streamflow predictions due to forcing data and the identification of behavioural parameter sets in 31 Irish catchments. By combining stochastic rainfall ensembles and multiple parameter sets for three conceptual rainfall-runoff models, an analysis of variance model was used to decompose the total uncertainty in streamflow simulations into contributions from (i) forcing data, (ii) identification of model parameters and (iii) interactions between the two. The analysis illustrates that, for our subjective choices, hydrological model selection had a greater contribution to overall uncertainty, while performance criteria selection influenced the relative intra-annual uncertainties in streamflow predictions. Uncertainties in streamflow predictions due to the method of determining parameters were relatively lower for wetter catchments, and more evenly distributed throughout the year when the Nash-Sutcliffe Efficiency of logarithmic values of flow (lnNSE) was the evaluation criterion.

Assessment of private hospital portals: A conceptual model

Directory of Open Access Journals (Sweden)

Mehdi Alipour-Hafezi

2016-01-01

Full Text Available Introduction: Hospital portals, as the first virtual entry, play an important role in connecting people with hospital and also presenting hospital virtual services. The main purpose of this article was to suggest a conceptual model to improve Tehran private hospital portals. The suggested model can be used by all the health portals that are in the same circumstances and all the health portals which are in progress. Method: This is a practical research, using evaluative survey research method. Research population includes all the private hospital portals in Tehran, 34 portals, and ten top international hospital portals. Data gathering tool used in this research was a researcher-made checklist including 14 criteria and 77 sub-criteria with their weight score. In fact, objective observation with the mentioned checklist was used to gather information. Descriptive statistics were used to analyze the data and tables and graphs were used to present the organized data. Also, data were analyzed using independent t-test. Conceptual modeling technique was used to design the model and demonstration method was used to evaluate the proposed model. In this regard, SPSS statistical software was used to perform the tests. Results:The comparative study between the two groups of portals, TPH and WTH, in the 14 main criteria showed that the value of t-test in contact information criteria was 0.862, portal page specification was -1.378, page design criteria -1.527, updating pages -0.322, general information and access roads -3.161, public services -7.302, patient services -4.154, patient data -8.703, research and education -9.155, public relationship -3.009, page technical specifications -4.726, telemedicine -7.488, pharmaceutical services -6.183, and financial services -2.782. Finally, the findings demonstrated that Tehran private hospital portals in criterion of contact information were favorable; page design criteria were relatively favorable; page technical

The conceptualization model problem—surprise

Science.gov (United States)

Bredehoeft, John

2005-03-01

The foundation of model analysis is the conceptual model. Surprise is defined as new data that renders the prevailing conceptual model invalid; as defined here it represents a paradigm shift. Limited empirical data indicate that surprises occur in 20-30% of model analyses. These data suggest that groundwater analysts have difficulty selecting the appropriate conceptual model. There is no ready remedy to the conceptual model problem other than (1) to collect as much data as is feasible, using all applicable methods—a complementary data collection methodology can lead to new information that changes the prevailing conceptual model, and (2) for the analyst to remain open to the fact that the conceptual model can change dramatically as more information is collected. In the final analysis, the hydrogeologist makes a subjective decision on the appropriate conceptual model. The conceptualization problem does not render models unusable. The problem introduces an uncertainty that often is not widely recognized. Conceptual model uncertainty is exacerbated in making long-term predictions of system performance. C'est le modèle conceptuel qui se trouve à base d'une analyse sur un modèle. On considère comme une surprise lorsque le modèle est invalidé par des données nouvelles; dans les termes définis ici la surprise est équivalente à un change de paradigme. Des données empiriques limitées indiquent que les surprises apparaissent dans 20 à 30% des analyses effectuées sur les modèles. Ces données suggèrent que l'analyse des eaux souterraines présente des difficultés lorsqu'il s'agit de choisir le modèle conceptuel approprié. Il n'existe pas un autre remède au problème du modèle conceptuel que: (1) rassembler autant des données que possible en utilisant toutes les méthodes applicables—la méthode des données complémentaires peut conduire aux nouvelles informations qui vont changer le modèle conceptuel, et (2) l'analyste doit rester ouvert au fait

Osmosis and Diffusion Conceptual Assessment

Science.gov (United States)

Fisher, Kathleen M.; Williams, Kathy S.; Lineback, Jennifer Evarts

2011-01-01

Biology student mastery regarding the mechanisms of diffusion and osmosis is difficult to achieve. To monitor comprehension of these processes among students at a large public university, we developed and validated an 18-item Osmosis and Diffusion Conceptual Assessment (ODCA). This assessment includes two-tiered items, some adopted or modified…

A conceptual precipitation-runoff modeling suite: Model selection, calibration and predictive uncertainty assessment

Science.gov (United States)

Tyler Jon Smith

2008-01-01

In Montana and much of the Rocky Mountain West, the single most important parameter in forecasting the controls on regional water resources is snowpack. Despite the heightened importance of snowpack, few studies have considered the representation of uncertainty in coupled snowmelt/hydrologic conceptual models. Uncertainty estimation provides a direct interpretation of...

Conceptual model to assess water use associated with the life cycle of unconventional oil and gas development

Science.gov (United States)

Valder, Joshua F.; McShane, Ryan R.; Barnhart, Theodore B.; Sando, Roy; Carter, Janet M.; Lundgren, Robert F.

2018-03-15

production can be categorized further as direct, indirect, or ancillary water use. Direct water use is defined as the water used for drilling and hydraulic fracturing a well and for maintaining the well during ongoing production. Indirect water use is defined as the water used at or near a well pad. The water used for dust abatement also is considered an indirect use but may be applied away from the well pad. Ancillary water use is defined as the additional local or regional water use resulting from a change (for example, population) directly related to UOG development throughout the life cycle that is not used directly in the well or indirectly for any other purpose at the well pad.The conceptual model presented in this report consists of five elements: (1) input data, (2) processes, (3) decisions, (4) output data, and (5) outcomes. The input data requirements for estimating water use associated with UOG development are somewhat onerous, and obtaining suitable datasets can be challenging because local, State, and Federal agencies do not collect data similarly. The quality of a water-use assessment that uses the conceptual model presented in this report is dependent on the quality and quantity of data that are available for a UOG play. The conceptual model can be used for an assessment with sparse data; however, having sparse data likely will result in greater uncertainty in the water-use estimates.The conceptual model presented in this report is designed to be robust to characterize and simulate the data processing to estimate water use associated with UOG development. Although the results of an analysis that includes missing data have greater uncertainty, the analysis still can be insightful because it can establish a baseline estimate of UOG water use that may be refined further as more data become available. Analysis of models that include missing data also could aid in identifying the data most needed for future water-use estimates. Characterizing individual model

Sensitivity of hydrological performance assessment analysis to variations in material properties, conceptual models, and ventilation models

Energy Technology Data Exchange (ETDEWEB)

Sobolik, S.R.; Ho, C.K.; Dunn, E. [Sandia National Labs., Albuquerque, NM (United States); Robey, T.H. [Spectra Research Inst., Albuquerque, NM (United States); Cruz, W.T. [Univ. del Turabo, Gurabo (Puerto Rico)

1996-07-01

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface- based and underground testing. Analyses have been performed to support the design of an Exploratory Studies Facility (ESF) and the design of the tests performed as part of the characterization process, in order to ascertain that they have minimal impact on the natural ability of the site to isolate waste. The information in this report pertains to sensitivity studies evaluating previous hydrological performance assessment analyses to variation in the material properties, conceptual models, and ventilation models, and the implications of this sensitivity on previous recommendations supporting ESF design. This document contains information that has been used in preparing recommendations for Appendix I of the Exploratory Studies Facility Design Requirements document.

Sensitivity of hydrological performance assessment analysis to variations in material properties, conceptual models, and ventilation models

International Nuclear Information System (INIS)

Sobolik, S.R.; Ho, C.K.; Dunn, E.; Robey, T.H.; Cruz, W.T.

1996-07-01

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface- based and underground testing. Analyses have been performed to support the design of an Exploratory Studies Facility (ESF) and the design of the tests performed as part of the characterization process, in order to ascertain that they have minimal impact on the natural ability of the site to isolate waste. The information in this report pertains to sensitivity studies evaluating previous hydrological performance assessment analyses to variation in the material properties, conceptual models, and ventilation models, and the implications of this sensitivity on previous recommendations supporting ESF design. This document contains information that has been used in preparing recommendations for Appendix I of the Exploratory Studies Facility Design Requirements document

Conceptual geoinformation model of natural hazards risk assessment

Science.gov (United States)

Kulygin, Valerii

2016-04-01

Natural hazards are the major threat to safe interactions between nature and society. The assessment of the natural hazards impacts and their consequences is important in spatial planning and resource management. Today there is a challenge to advance our understanding of how socio-economical and climate changes will affect the frequency and magnitude of hydro-meteorological hazards and associated risks. However, the impacts from different types of natural hazards on various marine and coastal economic activities are not of the same type. In this study, the conceptual geomodel of risk assessment is presented to highlight the differentiation by the type of economic activities in extreme events risk assessment. The marine and coastal ecosystems are considered as the objects of management, on the one hand, and as the place of natural hazards' origin, on the other hand. One of the key elements in describing of such systems is the spatial characterization of their components. Assessment of ecosystem state is based on ecosystem indicators (indexes). They are used to identify the changes in time. The scenario approach is utilized to account for the spatio-temporal dynamics and uncertainty factors. Two types of scenarios are considered: scenarios of using ecosystem services by economic activities and scenarios of extreme events and related hazards. The reported study was funded by RFBR, according to the research project No. 16-35-60043 mol_a_dk.

MARKET ENTRY STRATEGIES TO EMERGING MARKETS: A CONCEPTUAL MODEL OF TURNKEY PROJECT DEVELOPMENT

Directory of Open Access Journals (Sweden)

Bistra Vassileva

2016-11-01

Full Text Available The main purpose of the paper is to analyse the international market entry strategies in the light of globalisation processes and to propose a conceptual model of turnkey projects as market entry mode. The specific research objectives are as follows: 1. to develop an integrated framework of the turnkey marketing process as a conceptual model; 2. to analyse BRICS countries as potential host countries for turnkey projects implementation; 3. to assess potential implications of proposed conceptual model for global market entry decisions.

Pesticide fate on catchment scale: conceptual modelling of stream CSIA data

Science.gov (United States)

Lutz, Stefanie R.; van der Velde, Ype; Elsayed, Omniea F.; Imfeld, Gwenaël; Lefrancq, Marie; Payraudeau, Sylvain; van Breukelen, Boris M.

2017-10-01

Compound-specific stable isotope analysis (CSIA) has proven beneficial in the characterization of contaminant degradation in groundwater, but it has never been used to assess pesticide transformation on catchment scale. This study presents concentration and carbon CSIA data of the herbicides S-metolachlor and acetochlor from three locations (plot, drain, and catchment outlets) in a 47 ha agricultural catchment (Bas-Rhin, France). Herbicide concentrations at the catchment outlet were highest (62 µg L-1) in response to an intense rainfall event following herbicide application. Increasing δ13C values of S-metolachlor and acetochlor by more than 2 ‰ during the study period indicated herbicide degradation. To assist the interpretation of these data, discharge, concentrations, and δ13C values of S-metolachlor were modelled with a conceptual mathematical model using the transport formulation by travel-time distributions. Testing of different model setups supported the assumption that degradation half-lives (DT50) increase with increasing soil depth, which can be straightforwardly implemented in conceptual models using travel-time distributions. Moreover, model calibration yielded an estimate of a field-integrated isotopic enrichment factor as opposed to laboratory-based assessments of enrichment factors in closed systems. Thirdly, the Rayleigh equation commonly applied in groundwater studies was tested by our model for its potential to quantify degradation on catchment scale. It provided conservative estimates on the extent of degradation as occurred in stream samples. However, largely exceeding the simulated degradation within the entire catchment, these estimates were not representative of overall degradation on catchment scale. The conceptual modelling approach thus enabled us to upscale sample-based CSIA information on degradation to the catchment scale. Overall, this study demonstrates the benefit of combining monitoring and conceptual modelling of concentration

Conceptual models of information processing

Science.gov (United States)

Stewart, L. J.

1983-01-01

The conceptual information processing issues are examined. Human information processing is defined as an active cognitive process that is analogous to a system. It is the flow and transformation of information within a human. The human is viewed as an active information seeker who is constantly receiving, processing, and acting upon the surrounding environmental stimuli. Human information processing models are conceptual representations of cognitive behaviors. Models of information processing are useful in representing the different theoretical positions and in attempting to define the limits and capabilities of human memory. It is concluded that an understanding of conceptual human information processing models and their applications to systems design leads to a better human factors approach.

Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

International Nuclear Information System (INIS)

Klos, Richard; Wilmot, Roger

2002-09-01

The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference between

A conceptual and disease model framework for osteoporotic kyphosis.

Science.gov (United States)

Bayliss, M; Miltenburger, C; White, M; Alvares, L

2013-09-01

This paper presents a multi-method research project to develop a conceptual framework for measuring outcomes in studies of osteoporotic kyphosis. The research involved literature research and qualitative interviews among clinicians who treat patients with kyphosis and among patients with the condition. Kyphosis due to at least one vertebral compression fracture is prevalent among osteoporotic patients, resulting in well-documented symptoms and impact on functioning and well-being. A three-part study led to development of a conceptual measurement framework for comprehensive assessment of symptoms, impact, and treatment benefit for kyphosis. A literature-based disease model (DM) was developed and tested with physicians (n = 10) and patients (n = 10), and FDA guidelines were used to develop a final disease model and a conceptual framework. The DM included signs, symptoms, causes/triggers, exacerbations, and functional status associated with kyphosis. The DM was largely confirmed, but physicians and patients added several concepts related to impact on functioning, and some concepts were not confirmed and removed from the DM. This study confirms the need for more comprehensive assessment of health outcomes in kyphosis, as most current studies omit key concepts.

Information on Hydrologic Conceptual Models, Parameters, Uncertainty Analysis, and Data Sources for Dose Assessments at Decommissioning Sites

International Nuclear Information System (INIS)

Meyer, Philip D.; Gee, Glendon W.; Nicholson, Thomas J.

1999-01-01

This report addresses issues related to the analysis of uncertainty in dose assessments conducted as part of decommissioning analyses. The analysis is limited to the hydrologic aspects of the exposure pathway involving infiltration of water at the ground surface, leaching of contaminants, and transport of contaminants through the groundwater to a point of exposure. The basic conceptual models and mathematical implementations of three dose assessment codes are outlined along with the site-specific conditions under which the codes may provide inaccurate, potentially nonconservative results. In addition, the hydrologic parameters of the codes are identified and compared. A methodology for parameter uncertainty assessment is outlined that considers the potential data limitations and modeling needs of decommissioning analyses. This methodology uses generic parameter distributions based on national or regional databases, sensitivity analysis, probabilistic modeling, and Bayesian updating to incorporate site-specific information. Data sources for best-estimate parameter values and parameter uncertainty information are also reviewed. A follow-on report will illustrate the uncertainty assessment methodology using decommissioning test cases

Information on Hydrologic Conceptual Models, Parameters, Uncertainty Analysis, and Data Sources for Dose Assessments at Decommissioning Sites

International Nuclear Information System (INIS)

Meyer D, Philip; Gee W, Glendon

2000-01-01

This report addresses issues related to the analysis of uncertainty in dose assessments conducted as part of decommissioning analyses. The analysis is limited to the hydrologic aspects of the exposure pathway involving infiltration of water at the ground surface, leaching of contaminants, and transport of contaminants through the groundwater to a point of exposure. The basic conceptual models and mathematical implementations of three dose assessment codes are outlined along with the site-specific conditions under which the codes may provide inaccurate, potentially nonconservative results. In addition, the hydrologic parameters of the codes are identified and compared. A methodology for parameter uncertainty assessment is outlined that considers the potential data limitations and modeling needs of decommissioning analyses. This methodology uses generic parameter distributions based on national or regional databases, sensitivity analysis, probabilistic modeling, and Bayesian updating to incorporate site-specific information. Data sources for best-estimate parameter values and parameter uncertainty information are also reviewed. A follow-on report will illustrate the uncertainty assessment methodology using decommissioning test cases

Conceptual Models Core to Good Design

CERN Document Server

Johnson, Jeff

2011-01-01

People make use of software applications in their activities, applying them as tools in carrying out tasks. That this use should be good for people--easy, effective, efficient, and enjoyable--is a principal goal of design. In this book, we present the notion of Conceptual Models, and argue that Conceptual Models are core to achieving good design. From years of helping companies create software applications, we have come to believe that building applications without Conceptual Models is just asking for designs that will be confusing and difficult to learn, remember, and use. We show how Concept

A Conceptual Model to Identify Intent to Use Chemical-Biological Weapons

Directory of Open Access Journals (Sweden)

Mary Zalesny

2017-10-01

Full Text Available This paper describes a conceptual model to identify and interrelate indicators of intent of non-state actors to use chemical or biological weapons. The model expands on earlier efforts to understand intent to use weapons of mass destruction by building upon well-researched theories of intent and behavior and focusing on a sub-set of weapons of mass destruction (WMD to account for the distinct challenges of employing different types of WMD in violent acts. The conceptual model is presented as a first, critical step in developing a computational model for assessing the potential for groups to use chemical or biological weapons.

Managing postgraduate research service quality: Developing and assessing a conceptual model

Directory of Open Access Journals (Sweden)

Shawn Ramroop

2013-05-01

Full Text Available This paper reports on the conceptual development and empirical evaluation of a postgraduate (PG research service quality management model, through conducting an electronic survey among a cohort of master’s and doctorate graduates at one of the top three research universities in South Africa, using specifically developed and validated research instruments.By fitting the data from a sample of 117 graduates to a conceptual model using structural equation modelling, it became evident that the PG research students’ perception of the Organisational Climate for Research (OCR is associated with their perception of the PG Research Service Quality (PGSQUAL, the PG Service Experience (SERVEXP and their perception of their Role (RC. However, no association was found between the students’ perception of the research climate (OCR and their satisfaction (SERVSAT with the research service; the service experience (SERVEXP and postgraduate research service quality (PGSQUAL; service satisfaction (SERVSAT and postgraduate service quality (PGSQUAL.  The aforementioned findings imply that higher education institutions need to create a research climate which is supportive of service quality, and better manage the research climate, so that the PG students are clear about their role, which will eventually translate to a better PG service experience and improved perception of PG service quality.

Conceptualization of preferential flow for hillslope stability assessment

Science.gov (United States)

Kukemilks, Karlis; Wagner, Jean-Frank; Saks, Tomas; Brunner, Philip

2018-03-01

This study uses two approaches to conceptualize preferential flow with the goal to investigate their influence on hillslope stability. Synthetic three-dimensional hydrogeological models using dual-permeability and discrete-fracture conceptualization were subsequently integrated into slope stability simulations. The slope stability simulations reveal significant differences in slope stability depending on the preferential flow conceptualization applied, despite similar small-scale hydrogeological responses of the system. This can be explained by a local-scale increase of pore-water pressures observed in the scenario with discrete fractures. The study illustrates the critical importance of correctly conceptualizing preferential flow for slope stability simulations. It further demonstrates that the combination of the latest generation of physically based hydrogeological models with slope stability simulations allows for improvement to current modeling approaches through more complex consideration of preferential flow paths.

Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Klos, Richard; Wilmot, Roger [Galson Sciences Ltd (United Kingdom)

2002-09-01

The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference

Conceptual models in man-machine design verification

International Nuclear Information System (INIS)

Rasmussen, J.

1985-01-01

The need for systematic methods for evaluation of design concepts for new man-machine systems has been rapidly increasing in consequence of the introduction of modern information technology. Direct empirical methods are difficult to apply when functions during rare conditions and support of operator decisions during emergencies are to be evaluated. In this paper, the problems of analytical evaluations based on conceptual models of the man-machine interaction are discussed, and the relations to system design and analytical risk assessment are considered. Finally, a conceptual framework for analytical evaluation is proposed, including several domains of description: 1. The problem space, in the form of a means-end hierarchy; 2. The structure of the decision process; 3. The mental strategies and heuristics used by operators; 4. The levels of cognitive control and the mechanisms related to human errors. Finally, the need for models representing operators' subjective criteria for choosing among available mental strategies and for accepting advice from intelligent interfaces is discussed

Towards Smart and Resilient City: A Conceptual Model

Science.gov (United States)

Arafah, Y.; Winarso, H.; Suroso, D. S. A.

2018-05-01

This paper aims to compare five smart city models selected based on a number of specific criteria. Following the comparison and assessment performed, we draw conclusions and further linkages identifying the components and characters found in resilient cities. The purpose of this analysis is to produce a new approach and concept: the “smart and resilient city.” Through in-depth literature study, this paper analyzes five conceptual smart city models deemed to have a background, point of view, and benchmark towards software group, as they focus on welfare, inclusion, social equality, and competitiveness. Analyzing the strategies, methods, and techniques of five smart city models, this paper concludes that there has been no inclusion of resilience concepts in the assessment, especially in the context of natural disasters. Basically, the models are also interrelated and there are some things that overlap. As a recommendation, there is a model that tries to combine the components and character of smart city and resilient city into one entity that is embedded as a whole in a conceptual picture towards the new concept, the “smart and resilient city”. The concept of smart city and resilient city go hand in hand with each other and thus are interrelated. Therefore, it is imperative to study that concept deeper, in this case primarily in the context of disaster.

A conceptual model of political market orientation

DEFF Research Database (Denmark)

Ormrod, Robert P.

2005-01-01

. The remaining four constructs are attitudinal, designed to capture the awareness of members to the activities and importance of stakeholder groups in society, both internal and external to the organisation. The model not only allows the level of a party's political market orientation to be assessed, but also......This article proposes eight constructs of a conceptual model of political market orientation, taking inspiration from the business and political marketing literature. Four of the constructs are 'behavioural' in that they aim to describe the process of how information flows through the organisation...

Effect of alternative conceptual models in a preliminary performance assessment for the waste isolation pilot plant

International Nuclear Information System (INIS)

Helton, J.C.; Bean, J.E.; Berglund, J.W.; Beyeler, W.; Garner, J.W.; Iuzzolino, H.J.; Marietta, M.G.; Rudeen, D.K.; Schreiber, J.D.; Swift, P.N.; Tierney, M.S.; Vaughn, P.

1995-01-01

The most appropriate conceptual model for performance assessment (PA) at the waste isolation pilot plant (WIPP) is believed to include gas generation resulting from corrosion and microbial action in the repository, and a dual-porosity (matrix and fracture porosity) representation for the solute transport in the Culebra dolomite member of the Rustler formation. Under these assumptions, complementary cummulative distribution functions (CCDFs) which summarize the radionuclide releases to the accessible environment, resulting from both cutting removal and groundwater transport, fall substantially below the release limits promulgated by the US Environmental Protection Agency (EPA), with the releases being dominated by cuttings removal. To provide additional views, the following alternative conceptual models were considered as part of a preliminary PA for the WIPP: no gas generation in the repository and a dual-porosity transport model in the Culebra; gas generation in the repository and a single-porosity (fracture porosity) transport model in the Culebra; no gas generation in the repository and a single-porosity transport model in the Culebra; gas generation in the repository and a dual-porosity transport model in the Culebra, without chemical retardation; gas generation in the repository, chemical retardation in the Culebra, and extremes of climatic variation. These variations relate to groundwater transport, so do not affect the releases resulting from cuttings removal. Several of these variations substantially increase the importance of releases resulting from groundwater transport relative to releases resulting from cuttings removal. However, the total amount of releases generally remained small, with the CCDFs which summarize the releases to the accessible environment falling below the EPA release limits

Conceptual IT model

Science.gov (United States)

Arnaoudova, Kristina; Stanchev, Peter

2015-11-01

The business processes are the key asset for every organization. The design of the business process models is the foremost concern and target among an organization's functions. Business processes and their proper management are intensely dependent on the performance of software applications and technology solutions. The paper is attempt for definition of new Conceptual model of IT service provider, it could be examined as IT focused Enterprise model, part of Enterprise Architecture (EA) school.

Conceptualizing Telehealth in Nursing Practice: Advancing a Conceptual Model to Fill a Virtual Gap.

Science.gov (United States)

Nagel, Daniel A; Penner, Jamie L

2016-03-01

Increasingly nurses use various telehealth technologies to deliver health care services; however, there has been a lag in research and generation of empirical knowledge to support nursing practice in this expanding field. One challenge to generating knowledge is a gap in development of a comprehensive conceptual model or theoretical framework to illustrate relationships of concepts and phenomena inherent to adoption of a broad range of telehealth technologies to holistic nursing practice. A review of the literature revealed eight published conceptual models, theoretical frameworks, or similar entities applicable to nursing practice. Many of these models focus exclusively on use of telephones and four were generated from qualitative studies, but none comprehensively reflect complexities of bridging nursing process and elements of nursing practice into use of telehealth. The purpose of this article is to present a review of existing conceptual models and frameworks, discuss predominant themes and features of these models, and present a comprehensive conceptual model for telehealth nursing practice synthesized from this literature for consideration and further development. This conceptual model illustrates characteristics of, and relationships between, dimensions of telehealth practice to guide research and knowledge development in provision of holistic person-centered care delivery to individuals by nurses through telehealth technologies. © The Author(s) 2015.

Conceptual modelling of human resource evaluation process

Directory of Open Access Journals (Sweden)

Negoiţă Doina Olivia

2017-01-01

Full Text Available Taking into account the highly diverse tasks which employees have to fulfil due to complex requirements of nowadays consumers, the human resource within an enterprise has become a strategic element for developing and exploiting products which meet the market expectations. Therefore, organizations encounter difficulties when approaching the human resource evaluation process. Hence, the aim of the current paper is to design a conceptual model of the aforementioned process, which allows the enterprises to develop a specific methodology. In order to design the conceptual model, Business Process Modelling instruments were employed - Adonis Community Edition Business Process Management Toolkit using the ADONIS BPMS Notation. The conceptual model was developed based on an in-depth secondary research regarding the human resource evaluation process. The proposed conceptual model represents a generic workflow (sequential and/ or simultaneously activities, which can be extended considering the enterprise’s needs regarding their requirements when conducting a human resource evaluation process. Enterprises can benefit from using software instruments for business process modelling as they enable process analysis and evaluation (predefined / specific queries and also model optimization (simulations.

A conceptual framework for measuring airline business model convergence

OpenAIRE

Daft, Jost; Albers, Sascha

2012-01-01

This paper develops a measurement framework that synthesizes the airline and strategy literature to identify relevant dimensions and elements of airline business models. The applicability of this framework for describing airline strategies and structures and, based on this conceptualization, for assessing the potential convergence of airline business models over time is then illustrated using a small sample of five German passenger airlines. For this sample, the perception of a rapprochement ...

Conceptual Model of Climate Change Impacts at LANL

Energy Technology Data Exchange (ETDEWEB)

Dewart, Jean Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-05-17

Goal 9 of the LANL FY15 Site Sustainability Plan (LANL 2014a) addresses Climate Change Adaptation. As part of Goal 9, the plan reviews many of the individual programs the Laboratory has initiated over the past 20 years to address climate change impacts to LANL (e.g. Wildland Fire Management Plan, Forest Management Plan, etc.). However, at that time, LANL did not yet have a comprehensive approach to climate change adaptation. To fill this gap, the FY15 Work Plan for the LANL Long Term Strategy for Environmental Stewardship and Sustainability (LANL 2015) included a goal of (1) establishing a comprehensive conceptual model of climate change impacts at LANL and (2) establishing specific climate change indices to measure climate change and impacts at Los Alamos. Establishing a conceptual model of climate change impacts will demonstrate that the Laboratory is addressing climate change impacts in a comprehensive manner. This paper fulfills the requirement of goal 1. The establishment of specific indices of climate change at Los Alamos (goal 2), will improve our ability to determine climate change vulnerabilities and assess risk. Future work will include prioritizing risks, evaluating options/technologies/costs, and where appropriate, taking actions. To develop a comprehensive conceptual model of climate change impacts, we selected the framework provided in the National Oceanic and Atmospheric Administration (NOAA) Climate Resilience Toolkit (http://toolkit.climate.gov/).

MARKET ENTRY STRATEGIES TO EMERGING MARKETS: A CONCEPTUAL MODEL OF TURNKEY PROJECT DEVELOPMENT

OpenAIRE

Bistra Vassileva; Miroslav Nikolov

2016-01-01

The main purpose of the paper is to analyse the international market entry strategies in the light of globalisation processes and to propose a conceptual model of turnkey projects as market entry mode. The specific research objectives are as follows: 1. to develop an integrated framework of the turnkey marketing process as a conceptual model; 2. to analyse BRICS countries as potential host countries for turnkey projects implementation; 3. to assess potential implications of proposed concep...

Summary of Conceptual Models and Data Needs to Support the INL Remote-Handled Low-Level Waste Disposal Facility Performance Assessment and Composite Analysis

International Nuclear Information System (INIS)

Sondrup, A. Jeff; Schafter, Annette L.; Rood, Arthur S.

2010-01-01

An overview of the technical approach and data required to support development of the performance assessment, and composite analysis are presented for the remote handled low-level waste disposal facility on-site alternative being considered at Idaho National Laboratory. Previous analyses and available data that meet requirements are identified and discussed. Outstanding data and analysis needs are also identified and summarized. The on-site disposal facility is being evaluated in anticipation of the closure of the Radioactive Waste Management Complex at the INL. An assessment of facility performance and of the composite performance are required to meet the Department of Energy's Low-Level Waste requirements (DOE Order 435.1, 2001) which stipulate that operation and closure of the disposal facility will be managed in a manner that is protective of worker and public health and safety, and the environment. The corresponding established procedures to ensure these protections are contained in DOE Manual 435.1-1, Radioactive Waste Management Manual (DOE M 435.1-1 2001). Requirements include assessment of (1) all-exposure pathways, (2) air pathway, (3) radon, and (4) groundwater pathway doses. Doses are computed from radionuclide concentrations in the environment. The performance assessment and composite analysis are being prepared to assess compliance with performance objectives and to establish limits on concentrations and inventories of radionuclides at the facility and to support specification of design, construction, operation and closure requirements. Technical objectives of the PA and CA are primarily accomplished through the development of an establish inventory, and through the use of predictive environmental transport models implementing an overarching conceptual framework. This document reviews the conceptual model, inherent assumptions, and data required to implement the conceptual model in a numerical framework. Available site-specific data and data sources

A conceptual framework for a long-term economic model for the treatment of attention-deficit/hyperactivity disorder.

Science.gov (United States)

Nagy, Balázs; Setyawan, Juliana; Coghill, David; Soroncz-Szabó, Tamás; Kaló, Zoltán; Doshi, Jalpa A

2017-06-01

Models incorporating long-term outcomes (LTOs) are not available to assess the health economic impact of attention-deficit/hyperactivity disorder (ADHD). Develop a conceptual modelling framework capable of assessing long-term economic impact of ADHD therapies. Literature was reviewed; a conceptual structure for the long-term model was outlined with attention to disease characteristics and potential impact of treatment strategies. The proposed model has four layers: i) multi-state short-term framework to differentiate between ADHD treatments; ii) multiple states being merged into three core health states associated with LTOs; iii) series of sub-models in which particular LTOs are depicted; iv) outcomes collected to be either used directly for economic analyses or translated into other relevant measures. This conceptual model provides a framework to assess relationships between short- and long-term outcomes of the disease and its treatment, and to estimate the economic impact of ADHD treatments throughout the course of the disease.

Alternative conceptual models and codes for unsaturated flow in fractured tuff: Preliminary assessments for GWTT-95

International Nuclear Information System (INIS)

Ho, C.K.; Altman, S.J.; Arnold, B.W.

1995-09-01

Groundwater travel time (GWTT) calculations will play an important role in addressing site-suitability criteria for the potential high-level nuclear waste repository at Yucca Mountain,Nevada. In support of these calculations, Preliminary assessments of the candidate codes and models are presented in this report. A series of benchmark studies have been designed to address important aspects of modeling flow through fractured media representative of flow at Yucca Mountain. Three codes (DUAL, FEHMN, and TOUGH 2) are compared in these benchmark studies. DUAL is a single-phase, isothermal, two-dimensional flow simulator based on the dual mixed finite element method. FEHMN is a nonisothermal, multiphase, multidimensional simulator based primarily on the finite element method. TOUGH2 is anon isothermal, multiphase, multidimensional simulator based on the integral finite difference method. Alternative conceptual models of fracture flow consisting of the equivalent continuum model (ECM) and the dual permeability (DK) model are used in the different codes

Development of methodology to construct a generic conceptual model of river-valley evolution for performance assessment of HLW geological disposal

International Nuclear Information System (INIS)

Kawamura, Makoto; Tanikawa, Shin-ichi; Yasue, Ken-ichi; Niizato, Tadafumi

2011-01-01

In order to assess the long-term safety of a geological disposal system for high-level radioactive waste (HLW), it is important to consider the impact of uplift and erosion, which cannot be precluded on a timescale in the order of several hundred thousand years for many locations in Japan. Geomorphic evolution, caused by uplift and erosion and coupled to climatic and sea-level changes, will impact the geological disposal system due to resulting spatial and temporal changes in the disposal environment. Degradation of HLW barrier performance will be particularly significant when the remnant repository structures near, and are eventually exposed at, the ground surface. In previous studies, fluvial erosion was densified as the key concern in most settings in Japan. Interpretation of the impact of the phenomena at relevant locations in Japan has led to development of a generic conceptual model which contains the features typical at middle reach of rivers. Here, therefore, we present a methodology for development of a generic conceptual model based on best current understanding of fluvial erosion in Japan, which identifies the simplifications and uncertainties involved and assesses their consequences in the context of repository performance. (author)

Conceptual ecological models to guide integrated landscape monitoring of the Great Basin

Science.gov (United States)

Miller, D.M.; Finn, S.P.; Woodward, Andrea; Torregrosa, Alicia; Miller, M.E.; Bedford, D.R.; Brasher, A.M.

2010-01-01

The Great Basin Integrated Landscape Monitoring Pilot Project was developed in response to the need for a monitoring and predictive capability that addresses changes in broad landscapes and waterscapes. Human communities and needs are nested within landscapes formed by interactions among the hydrosphere, geosphere, and biosphere. Understanding the complex processes that shape landscapes and deriving ways to manage them sustainably while meeting human needs require sophisticated modeling and monitoring. This document summarizes current understanding of ecosystem structure and function for many of the ecosystems within the Great Basin using conceptual models. The conceptual ecosystem models identify key ecological components and processes, identify external drivers, develop a hierarchical set of models that address both site and landscape attributes, inform regional monitoring strategy, and identify critical gaps in our knowledge of ecosystem function. The report also illustrates an approach for temporal and spatial scaling from site-specific models to landscape models and for understanding cumulative effects. Eventually, conceptual models can provide a structure for designing monitoring programs, interpreting monitoring and other data, and assessing the accuracy of our understanding of ecosystem functions and processes.

A Bayesian belief network approach for assessing uncertainty in conceptual site models at contaminated sites

Science.gov (United States)

Thomsen, Nanna I.; Binning, Philip J.; McKnight, Ursula S.; Tuxen, Nina; Bjerg, Poul L.; Troldborg, Mads

2016-05-01

A key component in risk assessment of contaminated sites is in the formulation of a conceptual site model (CSM). A CSM is a simplified representation of reality and forms the basis for the mathematical modeling of contaminant fate and transport at the site. The CSM should therefore identify the most important site-specific features and processes that may affect the contaminant transport behavior at the site. However, the development of a CSM will always be associated with uncertainties due to limited data and lack of understanding of the site conditions. CSM uncertainty is often found to be a major source of model error and it should therefore be accounted for when evaluating uncertainties in risk assessments. We present a Bayesian belief network (BBN) approach for constructing CSMs and assessing their uncertainty at contaminated sites. BBNs are graphical probabilistic models that are effective for integrating quantitative and qualitative information, and thus can strengthen decisions when empirical data are lacking. The proposed BBN approach facilitates a systematic construction of multiple CSMs, and then determines the belief in each CSM using a variety of data types and/or expert opinion at different knowledge levels. The developed BBNs combine data from desktop studies and initial site investigations with expert opinion to assess which of the CSMs are more likely to reflect the actual site conditions. The method is demonstrated on a Danish field site, contaminated with chlorinated ethenes. Four different CSMs are developed by combining two contaminant source zone interpretations (presence or absence of a separate phase contamination) and two geological interpretations (fractured or unfractured clay till). The beliefs in each of the CSMs are assessed sequentially based on data from three investigation stages (a screening investigation, a more detailed investigation, and an expert consultation) to demonstrate that the belief can be updated as more information

National Identity: Conceptual models, discourses and political change

DEFF Research Database (Denmark)

Harder, Peter

2014-01-01

of conceptual models or discourses. This is especially important in cases that involve conflictive political issues such as national and ethnic identity. The article reports on a historical project with a linguistic dimension in my department (PI Stuart Ward, cf. Ward 2004), which aims to throw light......Cognitive Linguistics has demonstrated the applicability of a conceptual approach to the understanding of political issues, cf. Lakoff (2008) and many others. From a different perspective, critical discourse analysis has approached political concepts with a focus on issues involving potentially...... divisive features such as race, class, gender and ethnic identity. Although discourses are not identical to conceptual models, conceptual models are typically manifested in discourse, and discourses are typically reflections of conceptualizations, a theme explored e.g. in Hart and Lukes (2007). As argued...

OWL references in ORM conceptual modelling

Science.gov (United States)

Matula, Jiri; Belunek, Roman; Hunka, Frantisek

2017-07-01

Object Role Modelling methodology is the fact-based type of conceptual modelling. The aim of the paper is to emphasize a close connection to OWL documents and its possible mutual cooperation. The definition of entities or domain values is an indispensable part of the conceptual schema design procedure defined by the ORM methodology. Many of these entities are already defined in OWL documents. Therefore, it is not necessary to declare entities again, whereas it is possible to utilize references from OWL documents during modelling of information systems.

Conceptualizing strategic environmental assessment: Principles, approaches and research directions

International Nuclear Information System (INIS)

Noble, Bram; Nwanekezie, Kelechi

2017-01-01

Increasing emphasis has been placed in recent years on transitioning strategic environmental assessment (SEA) away from its environmental impact assessment (EIA) roots. Scholars have argued the need to conceptualize SEA as a process designed to facilitate strategic thinking, thus enabling transitions toward sustainability. The practice of SEA, however, remains deeply rooted in the EIA tradition and scholars and practitioners often appear divided on the nature and purpose of SEA. This paper revisits the strategic principles of SEA and conceptualizes SEA as a multi-faceted and multi-dimensional assessment process. It is suggested that SEA can be conceptualized as series of approaches operating along a spectrum from less to more strategic – from impact assessment-based to strategy-based – with each approach to SEA differentiated by the specific objectives of SEA application and the extent to which strategic principles are reflected in its design and implementation. Advancing the effectiveness of SEA requires a continued research agenda focused on improving the traditional SEA approach, as a tool to assess the impacts of policies, plans and programs (PPPs). Realizing the full potential of SEA, however, requires a new research agenda — one focused on the development and testing of a deliberative governance approach to SEA that can facilitate strategic innovations in PPP formulation and drive transitions in short-term policy and initiatives based on longer-term thinking. - Highlights: • SEA facilitates strategic thinking, enabling transitions toward sustainability. • SEA is conceptualized as a spectrum of approaches, from IA-based to strategy-based. • Each approach variably emphasizes strategic principles in its design and practice. • There is no one conceptualization of SEA that is best, SEA is fit for PPP purpose. • Research is needed to advance SEA to facilitate strategic PPP transformations.

Conceptualizing strategic environmental assessment: Principles, approaches and research directions

Energy Technology Data Exchange (ETDEWEB)

Noble, Bram, E-mail: b.noble@usask.ca [Department of Geography and Planning, and School of Environment and Sustainability, University of Saskatchewan, 117 Science Place, Saskatoon, Saskatchewan S7N 5A5 (Canada); Nwanekezie, Kelechi [Department of Geography and Planning, University of Saskatchewan, 117 Science Place, Saskatoon, Saskatchewan S7N 5A5 (Canada)

2017-01-15

Increasing emphasis has been placed in recent years on transitioning strategic environmental assessment (SEA) away from its environmental impact assessment (EIA) roots. Scholars have argued the need to conceptualize SEA as a process designed to facilitate strategic thinking, thus enabling transitions toward sustainability. The practice of SEA, however, remains deeply rooted in the EIA tradition and scholars and practitioners often appear divided on the nature and purpose of SEA. This paper revisits the strategic principles of SEA and conceptualizes SEA as a multi-faceted and multi-dimensional assessment process. It is suggested that SEA can be conceptualized as series of approaches operating along a spectrum from less to more strategic – from impact assessment-based to strategy-based – with each approach to SEA differentiated by the specific objectives of SEA application and the extent to which strategic principles are reflected in its design and implementation. Advancing the effectiveness of SEA requires a continued research agenda focused on improving the traditional SEA approach, as a tool to assess the impacts of policies, plans and programs (PPPs). Realizing the full potential of SEA, however, requires a new research agenda — one focused on the development and testing of a deliberative governance approach to SEA that can facilitate strategic innovations in PPP formulation and drive transitions in short-term policy and initiatives based on longer-term thinking. - Highlights: • SEA facilitates strategic thinking, enabling transitions toward sustainability. • SEA is conceptualized as a spectrum of approaches, from IA-based to strategy-based. • Each approach variably emphasizes strategic principles in its design and practice. • There is no one conceptualization of SEA that is best, SEA is fit for PPP purpose. • Research is needed to advance SEA to facilitate strategic PPP transformations.

On Automatic Assessment and Conceptual Understanding

Science.gov (United States)

Rasila, Antti; Malinen, Jarmo; Tiitu, Hannu

2015-01-01

We consider two complementary aspects of mathematical skills, i.e. "procedural fluency" and "conceptual understanding," from a point of view that is related to modern e-learning environments and computer-based assessment. Pedagogical background of teaching mathematics is discussed, and it is proposed that the traditional book…

A Structural Equation Model of Conceptual Change in Physics

Science.gov (United States)

Taasoobshirazi, Gita; Sinatra, Gale M.

2011-01-01

A model of conceptual change in physics was tested on introductory-level, college physics students. Structural equation modeling was used to test hypothesized relationships among variables linked to conceptual change in physics including an approach goal orientation, need for cognition, motivation, and course grade. Conceptual change in physics…

Conceptualizing the e-Learning Assessment Domain using an Ontology Network

Directory of Open Access Journals (Sweden)

Lucía Romero

2012-09-01

Full Text Available During the last year, approaches that use ontologies, the backbone of the Semantic Web technologies, for different purposes in the assessment domain of e-Learning have emerged. One of these purposes is the use of ontologies as a mean of providing a structure to guide the automated design of assessments. The most of the approaches that deal with this problem have proposed individual ontologies that model only a part of the assessment domain. The main contribution of this paper is an ontology network, called AONet, that conceptualizes the e-assessment domain with the aim of supporting the semi-automatic generation of it. The main advantage of this network is that it is enriched with rules for considering not only technical aspects of an assessment but also pedagogic

Assessing Students' Conceptual Knowledge of Electricity and Magnetism

Science.gov (United States)

McColgan, Michele W.; Finn, Rose A.; Broder, Darren L.; Hassel, George E.

2017-01-01

We present the Electricity and Magnetism Conceptual Assessment (EMCA), a new assessment aligned with second-semester introductory physics courses. Topics covered include electrostatics, electric fields, circuits, magnetism, and induction. We have two motives for writing a new assessment. First, we find other assessments such as the Brief…

Use of GIS and 3D Modeling for Development and Conceptualization of a Performance Assessment Model for Decommissioning of a Complex Site

International Nuclear Information System (INIS)

Esh, D. W.; Gross, A. J.; Thaggard, M.

2006-01-01

Geographic Information Systems (GIS) and 3D geo-spatial modeling were employed to facilitate development and conceptualization of a performance assessment (PA) model that will be used to evaluate the health impacts of residual radioactivity at a former nuclear materials processing facility site in New York. Previous operations have resulted in a number of different sources of radiological contamination that must be assessed during site decommissioning. A performance assessment model is being developed to estimate radiological dose to potential receptors through the simulation of the release and transport of radionuclides, and exposure to residual contamination for hundreds to thousands of years in the future. A variety of inputs are required to parameterize the performance assessment model, such as: distance from the waste to surface water bodies, thickness of geologic units for saturated transport, saturated thickness of the geologic units, and spatial and temporal average of percent of waste that is saturated. GIS and 3D modeling are used to analyze and abstract aleatory uncertainty associated with the dimensionality of the geologic system into epistemic uncertainty for one- and two-dimensional process models for flow and transport of radionuclides. Three-dimensional geo-spatial modeling was used to develop the geologic framework and the geometrical representation of the residual contamination within the geologic framework. GIS was used in the initial development and parameterization of the transport pathways, to provide spatial context to the PA model, and to link it to the 3D geologic framework and contamination geometry models. Both the GIS and 3-D modeling were used to interpret the results of runs of the PA model. (authors)

Conceptualizing the Effectiveness of Sustainability Assessment in Development Cooperation

Directory of Open Access Journals (Sweden)

Jean Hugé

2015-05-01

Full Text Available Sustainability assessment has emerged as a key decision-support process in development cooperation in response to the growing acknowledgement of the impacts of global change. This paper aims at conceptualizing the effectiveness of sustainability assessment as applied in development cooperation, by focusing on the sustainability assessment practice by actors of the official Belgian Development Cooperation. The conceptualization of the effectiveness of sustainability assessment is synthesized in a set of issues and concerns, based on semi-structured interviews. The paper highlights the specificity of sustainability assessment in the development cooperation sector (e.g., through the cultural and discursive compatibility dimensions of assessment in a North-South context. Effectiveness is inherently linked to the expected functions of sustainability assessment in the decision-making process, which include fostering organizational change, shaping contextually adapted framings of sustainability and operationalizing the sustainability transition. These findings highlight the relevance of a discourse-sensitive approach to sustainability assessment if one is to strengthen its credibility and legitimacy.

Regional hydrogeological conceptual model of candidate Beishan area for high level radioactive waste disposal repository

International Nuclear Information System (INIS)

Wang Hailong; Guo Yonghai

2014-01-01

The numerical modeling of groundwater flow is an important aspect of hydrogeological assessment in siting of a high level radioactive waste disposal repository. Hydrogeological conceptual model is the basic and premise of numerical modeling of groundwater flow. Based on the hydrogeological analysis of candidate Beishan area, surface water system was created by using DEM data and the modeling area is determined. Three-dimensional hydrogeological structure model was created through GMS software. On the basis of analysis and description of boundary condition, flow field, groundwater budget and hydrogeological parameters, hydrogeological conceptual model was set up for the Beishan area. (authors)

Empirical evaluation of the conceptual model underpinning a regional aquatic long-term monitoring program using causal modelling

Science.gov (United States)

Irvine, Kathryn M.; Miller, Scott; Al-Chokhachy, Robert K.; Archer, Erik; Roper, Brett B.; Kershner, Jeffrey L.

2015-01-01

Conceptual models are an integral facet of long-term monitoring programs. Proposed linkages between drivers, stressors, and ecological indicators are identified within the conceptual model of most mandated programs. We empirically evaluate a conceptual model developed for a regional aquatic and riparian monitoring program using causal models (i.e., Bayesian path analysis). We assess whether data gathered for regional status and trend estimation can also provide insights on why a stream may deviate from reference conditions. We target the hypothesized causal pathways for how anthropogenic drivers of road density, percent grazing, and percent forest within a catchment affect instream biological condition. We found instream temperature and fine sediments in arid sites and only fine sediments in mesic sites accounted for a significant portion of the maximum possible variation explainable in biological condition among managed sites. However, the biological significance of the direct effects of anthropogenic drivers on instream temperature and fine sediments were minimal or not detected. Consequently, there was weak to no biological support for causal pathways related to anthropogenic drivers’ impact on biological condition. With weak biological and statistical effect sizes, ignoring environmental contextual variables and covariates that explain natural heterogeneity would have resulted in no evidence of human impacts on biological integrity in some instances. For programs targeting the effects of anthropogenic activities, it is imperative to identify both land use practices and mechanisms that have led to degraded conditions (i.e., moving beyond simple status and trend estimation). Our empirical evaluation of the conceptual model underpinning the long-term monitoring program provided an opportunity for learning and, consequently, we discuss survey design elements that require modification to achieve question driven monitoring, a necessary step in the practice of

Assessing species saturation: conceptual and methodological challenges.

Science.gov (United States)

Olivares, Ingrid; Karger, Dirk N; Kessler, Michael

2018-05-07

Is there a maximum number of species that can coexist? Intuitively, we assume an upper limit to the number of species in a given assemblage, or that a lineage can produce, but defining and testing this limit has proven problematic. Herein, we first outline seven general challenges of studies on species saturation, most of which are independent of the actual method used to assess saturation. Among these are the challenge of defining saturation conceptually and operationally, the importance of setting an appropriate referential system, and the need to discriminate among patterns, processes and mechanisms. Second, we list and discuss the methodological approaches that have been used to study species saturation. These approaches vary in time and spatial scales, and in the variables and assumptions needed to assess saturation. We argue that assessing species saturation is possible, but that many studies conducted to date have conceptual and methodological flaws that prevent us from currently attaining a good idea of the occurrence of species saturation. © 2018 Cambridge Philosophical Society.

Investigating conceptual models for physical property couplings in solid solution models of cement

International Nuclear Information System (INIS)

Benbow, Steven; Watson, Claire; Savage, David

2005-11-01

The long-term behaviour of cementitious engineered barriers is an important process to consider when modelling the migration of radionuclides from a geological repository for nuclear waste. The modelling of cement is complicated by the fact that the cement is dominated by the behaviour of calcium silicate hydrate (CSH) gel which is a complex solid exhibiting incongruent dissolution behaviour. In this report, we have demonstrated the implementation of a solid-solution CSH gel model within a geochemical transport modelling framework using the Raiden computer code to investigate cement/concrete-groundwater interactions. The modelling conducted here shows that it is possible to couple various conceptual models for the evolution of physical properties of concrete with a solid solution model for cement degradation in a fully coupled geochemical transport model to describe the interaction of cement/concrete engineered barriers with groundwater. The results show that changes to the conceptual models and flow rates can give rise to very different evolutions. Most simulations were carried out at a reduced 'experimental' scale rather than full repository scale. The work has shown the possibility to investigate also the changing physical properties of degrading cement. To further develop the model more emphasis is needed on kinetics and the detailed development of a nearly clogged pore space. Modelling of the full repository scale could be another way forward to understand the behaviour of degrading concrete. A general conclusion is that the combined effects of chemical evolution and physical degradation should be analysed in performance assessments of cementitious repositories. Moreover, the project results will be used as one basis in coming reviews of SKB's safety assessments of repositories for spent fuel and low-and intermediate level waste

Role of conceptual models in nuclear power plant operation

International Nuclear Information System (INIS)

Williams, M.D.; Moran, T.P.; Brown, J.S.

1982-01-01

A crucial objective in plant operation (and perhaps licensing) ought to be to explicitly train operators to develop, perhaps with computer aids, robust conceptual models of the plants they control. The question is whether we are actually able to develop robust conceptual models and validate their robustness. Cognitive science is just beginning to come to grips with this problem. This paper describes some of the evolving technology for building conceptual models of physical mechanisms and some of the implications of such models in the context of nuclear power plant operation

COSMO: a conceptual framework for service modelling and refinement

NARCIS (Netherlands)

Quartel, Dick; Steen, Maarten W.A.; Pokraev, S.; van Sinderen, Marten J.

This paper presents a conceptual framework for service modelling and refinement, called the COSMO (COnceptual Service MOdelling) framework. This framework provides concepts to model and reason about services, and to support operations, such as composition and discovery, which are performed on them

Educational game models: conceptualization and evaluation ...

African Journals Online (AJOL)

Educational game models: conceptualization and evaluation. ... The Game Object Model (GOM), that marries educational theory and game design, forms the basis for the development of the Persona Outlining ... AJOL African Journals Online.

Conceptual Models in Health Informatics Research: A Literature Review and Suggestions for Development.

Science.gov (United States)

Gray, Kathleen; Sockolow, Paulina

2016-02-24

Contributing to health informatics research means using conceptual models that are integrative and explain the research in terms of the two broad domains of health science and information science. However, it can be hard for novice health informatics researchers to find exemplars and guidelines in working with integrative conceptual models. The aim of this paper is to support the use of integrative conceptual models in research on information and communication technologies in the health sector, and to encourage discussion of these conceptual models in scholarly forums. A two-part method was used to summarize and structure ideas about how to work effectively with conceptual models in health informatics research that included (1) a selective review and summary of the literature of conceptual models; and (2) the construction of a step-by-step approach to developing a conceptual model. The seven-step methodology for developing conceptual models in health informatics research explained in this paper involves (1) acknowledging the limitations of health science and information science conceptual models; (2) giving a rationale for one's choice of integrative conceptual model; (3) explicating a conceptual model verbally and graphically; (4) seeking feedback about the conceptual model from stakeholders in both the health science and information science domains; (5) aligning a conceptual model with an appropriate research plan; (6) adapting a conceptual model in response to new knowledge over time; and (7) disseminating conceptual models in scholarly and scientific forums. Making explicit the conceptual model that underpins a health informatics research project can contribute to increasing the number of well-formed and strongly grounded health informatics research projects. This explication has distinct benefits for researchers in training, research teams, and researchers and practitioners in information, health, and other disciplines.

Conceptual model of sediment processes in the upper Yuba River watershed, Sierra Nevada, CA

Science.gov (United States)

Curtis, J.A.; Flint, L.E.; Alpers, Charles N.; Yarnell, S.M.

2005-01-01

This study examines the development of a conceptual model of sediment processes in the upper Yuba River watershed; and we hypothesize how components of the conceptual model may be spatially distributed using a geographical information system (GIS). The conceptual model illustrates key processes controlling sediment dynamics in the upper Yuba River watershed and was tested and revised using field measurements, aerial photography, and low elevation videography. Field reconnaissance included mass wasting and channel storage inventories, assessment of annual channel change in upland tributaries, and evaluation of the relative importance of sediment sources and transport processes. Hillslope erosion rates throughout the study area are relatively low when compared to more rapidly eroding landscapes such as the Pacific Northwest and notable hillslope sediment sources include highly erodible andesitic mudflows, serpentinized ultramafics, and unvegetated hydraulic mine pits. Mass wasting dominates surface erosion on the hillslopes; however, erosion of stored channel sediment is the primary contributor to annual sediment yield. We used GIS to spatially distribute the components of the conceptual model and created hillslope erosion potential and channel storage models. The GIS models exemplify the conceptual model in that landscapes with low potential evapotranspiration, sparse vegetation, steep slopes, erodible geology and soils, and high road densities display the greatest hillslope erosion potential and channel storage increases with increasing stream order. In-channel storage in upland tributaries impacted by hydraulic mining is an exception. Reworking of stored hydraulic mining sediment in low-order tributaries continues to elevate upper Yuba River sediment yields. Finally, we propose that spatially distributing the components of a conceptual model in a GIS framework provides a guide for developing more detailed sediment budgets or numerical models making it an

Conceptual models in the field of library catalogues

Directory of Open Access Journals (Sweden)

Marija Petek

2000-01-01

Full Text Available The publishing world is changing quickly and so must also bibliographic control. It is tirne to re-examine cataloguing rules and MARC formats. This can be done by the method of conceptual modelling. Some conceptual models are presented; an IFLA study on the functional requirements for bibliographic records is described in detail.

Investigating conceptual models for physical property couplings in solid solution models of cement

Energy Technology Data Exchange (ETDEWEB)

Benbow, Steven; Watson, Claire; Savage, David [Quintesssa Ltd., Henley-on-Thames (United Kingdom)

2005-11-15

The long-term behaviour of cementitious engineered barriers is an important process to consider when modelling the migration of radionuclides from a geological repository for nuclear waste. The modelling of cement is complicated by the fact that the cement is dominated by the behaviour of calcium silicate hydrate (CSH) gel which is a complex solid exhibiting incongruent dissolution behaviour. In this report, we have demonstrated the implementation of a solid-solution CSH gel model within a geochemical transport modelling framework using the Raiden computer code to investigate cement/concrete-groundwater interactions. The modelling conducted here shows that it is possible to couple various conceptual models for the evolution of physical properties of concrete with a solid solution model for cement degradation in a fully coupled geochemical transport model to describe the interaction of cement/concrete engineered barriers with groundwater. The results show that changes to the conceptual models and flow rates can give rise to very different evolutions. Most simulations were carried out at a reduced 'experimental' scale rather than full repository scale. The work has shown the possibility to investigate also the changing physical properties of degrading cement. To further develop the model more emphasis is needed on kinetics and the detailed development of a nearly clogged pore space. Modelling of the full repository scale could be another way forward to understand the behaviour of degrading concrete. A general conclusion is that the combined effects of chemical evolution and physical degradation should be analysed in performance assessments of cementitious repositories. Moreover, the project results will be used as one basis in coming reviews of SKB's safety assessments of repositories for spent fuel and low-and intermediate level waste.

Template for Conceptual Model Construction: Model Review and Corps Applications

National Research Council Canada - National Science Library

Henderson, Jim E; O'Neil, L. J

2007-01-01

.... The template will expedite conceptual model construction by providing users with model parameters and potential model components, building on a study team's knowledge and experience, and promoting...

Conceptual Frameworks in the Doctoral Research Process: A Pedagogical Model

Science.gov (United States)

Berman, Jeanette; Smyth, Robyn

2015-01-01

This paper contributes to consideration of the role of conceptual frameworks in the doctoral research process. Through reflection on the two authors' own conceptual frameworks for their doctoral studies, a pedagogical model has been developed. The model posits the development of a conceptual framework as a core element of the doctoral…

Conceptual and methodological challenges to integrating SEA and cumulative effects assessment

International Nuclear Information System (INIS)

Gunn, Jill; Noble, Bram F.

2011-01-01

The constraints to assessing and managing cumulative environmental effects in the context of project-based environmental assessment are well documented, and the potential benefits of a more strategic approach to cumulative effects assessment (CEA) are well argued; however, such benefits have yet to be clearly demonstrated in practice. While it is widely assumed that cumulative effects are best addressed in a strategic context, there has been little investigation as to whether CEA and strategic environmental assessment (SEA) are a 'good fit' - conceptually or methodologically. This paper identifies a number of conceptual and methodological challenges to the integration of CEA and SEA. Based on results of interviews with international experts and practitioners, this paper demonstrates that: definitions and conceptualizations of CEA are typically weak in practice; approaches to effects aggregation vary widely; a systems perspective lacks in both SEA and CEA; the multifarious nature of SEA complicates CEA; tiering arrangements between SEA and project-based assessment are limited to non-existing; and the relationship of SEA to regional planning remains unclear.

Patient-reported outcomes in insomnia: development of a conceptual framework and endpoint model.

Science.gov (United States)

Kleinman, Leah; Buysse, Daniel J; Harding, Gale; Lichstein, Kenneth; Kalsekar, Anupama; Roth, Thomas

2013-01-01

This article describes qualitative research conducted with patients with clinical diagnoses of insomnia and focuses on the development of a conceptual framework and endpoint model that identifies a hierarchy and interrelationships of potential outcomes in insomnia research. Focus groups were convened to discuss how patients experience insomnia and to generate items for patient-reported questionnaires on insomnia and associated daytime consequences. Results for the focus group produced two conceptual frameworks: one for sleep and one for daytime impairment. Each conceptual framework consists of hypothesized domains and items in each domain based on patient language taken from the focus group. These item pools may ultimately serve as a basis to develop new questionnaires to assess insomnia.

Design of an UML conceptual model and implementation of a GIS with metadata information for a seismic hazard assessment cooperative project.

Science.gov (United States)

Torres, Y.; Escalante, M. P.

2009-04-01

This work illustrates the advantages of using a Geographic Information System in a cooperative project with researchers of different countries, such as the RESIS II project (financed by the Norwegian Government and managed by CEPREDENAC) for seismic hazard assessment of Central America. As input data present different formats, cover distinct geographical areas and are subjected to different interpretations, data inconsistencies may appear and their management get complicated. To achieve data homogenization and to integrate them in a GIS, it is required previously to develop a conceptual model. This is accomplished in two phases: requirements analysis and conceptualization. The Unified Modeling Language (UML) is used to compose the conceptual model of the GIS. UML complies with ISO 19100 norms and allows the designer defining model architecture and interoperability. The GIS provides a frame for the combination of large geographic-based data volumes, with an uniform geographic reference and avoiding duplications. All this information contains its own metadata following ISO 19115 normative. In this work, the integration in the same environment of active faults and subduction slabs geometries, combined with the epicentres location, has facilitated the definition of seismogenetic regions. This is a great support for national specialists of different countries to make easier their teamwork. The GIS capacity for making queries (by location and by attributes) and geostatistical analyses is used to interpolate discrete data resulting from seismic hazard calculations and to create continuous maps as well as to check and validate partial results of the study. GIS-based products, such as complete, homogenised databases and thematic cartography of the region, are distributed to all researchers, facilitating cross-national communication, the project execution and results dissemination.

Comparison of two conceptual models of flow using the TSA

International Nuclear Information System (INIS)

Wilson, M.L.

1992-01-01

As part of the performance-assessment task for the potential repository site at Yucca Mountain, Nevada, Sandia National Laboratories is developing a set of programs called the Total-System Analyzer (TSA). The TSA is one of the tools being used in the current effort to provide a systematic preliminary estimate the total-system performance of the Yucca Mountain site. The purposes of this paper are twofold: (1) to describe capabilities that have been added to the TSA in the last year; and (2) to present a comparison of two conceptual models of unsaturated-zone flow and transport, in terms of the performance measure specified by the Environmental Protection Agency (EPA) in 40 CFR Part 191. The conceptual-model comparison is intended to demonstrate the new TSA capabilities and at the same time shed some light on the performance implications of fracture flow at Yucca Mountain. Unsaturated fracture flow is not yet well understood, and it is of great importance in determining the performance of Yucca Mountain

The treatment of conceptual model uncertainty for Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Boak, J.M.; Flint, A.; Dockery, H.A.

1995-01-01

A reasonable risk assessment of radioactive waste disposals faces three main problems : 1) the ability of the conceptual model to account for the effective repository process ; 2) the boundary conditions ; 3) the parameters values that model the particular site. Yucca mountain Site Characterization Project deals with these problems through two major approaches that are described here : 1) the evolution of models for the recurrence rate of volcanism ; 2) the nominal hydrologic performance for the site. These two approaches are expected to lead to a reasonable demonstration of the suitability of the site. (D.L.). 13 refs., 2 figs

Achievements and Problems of Conceptual Modelling

Science.gov (United States)

Thalheim, Bernhard

Database and information systems technology has substantially changed. Nowadays, content management systems, (information-intensive) web services, collaborating systems, internet databases, OLAP databases etc. have become buzzwords. At the same time, object-relational technology has gained the maturity for being widely applied. Conceptual modelling has not (yet) covered all these novel topics. It has been concentrated for more than two decades around specification of structures. Meanwhile, functionality, interactivity and distribution must be included into conceptual modelling of information systems. Also, some of the open problems that have been already discussed in 1987 [15, 16] still remain to be open. At the same time, novel models such as object-relational models or XML-based models have been developed. They did not overcome all the problems but have been sharpening and extending the variety of open problems. The open problem presented are given for classical areas of database research, i.e., structuring and functionality. The entire are of distribution and interaction is currently an area of very intensive research.

Conceptual Model and Numerical Approaches for Unsaturated Zone Flow and Transport

International Nuclear Information System (INIS)

H.H. Liu

2004-01-01

The purpose of this model report is to document the conceptual and numerical models used for modeling unsaturated zone (UZ) fluid (water and air) flow and solute transport processes. This work was planned in ''Technical Work Plan for: Unsaturated Zone Flow Model and Analysis Report Integration'' (BSC 2004 [DIRS 169654], Sections 1.2.5, 2.1.1, 2.1.2 and 2.2.1). The conceptual and numerical modeling approaches described in this report are mainly used for models of UZ flow and transport in fractured, unsaturated rock under ambient conditions. Developments of these models are documented in the following model reports: (1) UZ Flow Model and Submodels; (2) Radionuclide Transport Models under Ambient Conditions. Conceptual models for flow and transport in unsaturated, fractured media are discussed in terms of their applicability to the UZ at Yucca Mountain. The rationale for selecting the conceptual models used for modeling of UZ flow and transport is documented. Numerical approaches for incorporating these conceptual models are evaluated in terms of their representation of the selected conceptual models and computational efficiency; and the rationales for selecting the numerical approaches used for modeling of UZ flow and transport are discussed. This report also documents activities to validate the active fracture model (AFM) based on experimental observations and theoretical developments. The AFM is a conceptual model that describes the fracture-matrix interaction in the UZ of Yucca Mountain. These validation activities are documented in Section 7 of this report regarding use of an independent line of evidence to provide additional confidence in the use of the AFM in the UZ models. The AFM has been used in UZ flow and transport models under both ambient and thermally disturbed conditions. Developments of these models are documented

Assessing students' conceptual knowledge of electricity and magnetism

Science.gov (United States)

McColgan, Michele W.; Finn, Rose A.; Broder, Darren L.; Hassel, George E.

2017-12-01

We present the Electricity and Magnetism Conceptual Assessment (EMCA), a new assessment aligned with second-semester introductory physics courses. Topics covered include electrostatics, electric fields, circuits, magnetism, and induction. We have two motives for writing a new assessment. First, we find other assessments such as the Brief Electricity and Magnetism Assessment and the Conceptual Survey on Electricity and Magnetism not well aligned with the topics and content depth of our courses. We want to test introductory physics content at a level appropriate for our students. Second, we want the assessment to yield scores and gains comparable to the widely used Force Concept Inventory (FCI). After five testing and revision cycles, the assessment was finalized in early 2015 and is available online. We present performance results for a cohort of 225 students at Siena College who were enrolled in our algebra- and calculus-based physics courses during the spring 2015 and 2016 semesters. We provide pretest, post-test, and gain analyses, as well as individual question and whole test statistics to quantify difficulty and reliability. In addition, we compare EMCA and FCI scores and gains, and we find that students' FCI scores are strongly correlated with their performance on the EMCA. Finally, the assessment was piloted in an algebra-based physics course at George Washington University (GWU). We present performance results for a cohort of 130 GWU students and we find that their EMCA scores are comparable to the scores of students in our calculus-based physics course.

Application of the human needs conceptual model of dental hygiene to the role of the clinician : part II.

Science.gov (United States)

Walsh, M M; Darby, M

1993-01-01

In summary, the theories of Maslow and of Yura and Walsh have been highlighted as background for understanding the human needs conceptual model of dental hygiene. In addition, 11 human needs have been identified and defined as being especially related to dental hygiene care, and a sample evaluation tool for their clinical assessment and a dental hygiene care plan have been presented. The four concepts of client, environment, health/oral health, and dental hygiene actions explained in terms of human need theory, and the 11 human needs related to dental hygiene care constitute the human needs conceptual model of dental hygiene. Within the framework of the human needs conceptual model of dental hygiene, the dental hygiene process is a systematic approach to dental hygiene care that involves assessment of the 11 human needs related to dental hygiene care; analysis of deficits in these needs; determination of the dental hygiene care plan based on identified deficits; implementation of dental hygiene interventions stated in the care plan; and evaluation of the effectiveness of dental hygiene interventions in achieving specific goals, including subsequent reassessment and revision of the dental hygiene care plan. This human needs conceptual model for dental hygiene provides a guide for comprehensive and humanistic client care. This model allows the dental hygienist to view each client (whether an individual or a group) holistically to prevent oral disease and to promote health and wellness. Dental hygiene theorists are encouraged to expand this model or to develop additional conceptual models based on dental hygiene's paradigm.

Conceptualizing Accessibility for English Language Proficiency Assessments. Research Report. ETS RR-16-07

Science.gov (United States)

Guzman-Orth, Danielle; Laitusis, Cara; Thurlow, Martha; Christensen, Laurene

2016-01-01

This paper is the second in a series from Educational Testing Service (ETS) that conceptualizes next-generation English language proficiency (ELP) assessment systems for K-12 English learners (ELs) in the United States.The first paper articulated a high-level conceptualization of next-generation ELP assessment systems (Hauck, Wolf, & Mislevy,…

ADOxx Modelling Method Conceptualization Environment

Directory of Open Access Journals (Sweden)

Nesat Efendioglu

2017-04-01

Full Text Available The importance of Modelling Methods Engineering is equally rising with the importance of domain specific languages (DSL and individual modelling approaches. In order to capture the relevant semantic primitives for a particular domain, it is necessary to involve both, (a domain experts, who identify relevant concepts as well as (b method engineers who compose a valid and applicable modelling approach. This process consists of a conceptual design of formal or semi-formal of modelling method as well as a reliable, migratable, maintainable and user friendly software development of the resulting modelling tool. Modelling Method Engineering cycle is often under-estimated as both the conceptual architecture requires formal verification and the tool implementation requires practical usability, hence we propose a guideline and corresponding tools to support actors with different background along this complex engineering process. Based on practical experience in business, more than twenty research projects within the EU frame programmes and a number of bilateral research initiatives, this paper introduces the phases, corresponding a toolbox and lessons learned with the aim to support the engineering of a modelling method. ”The proposed approach is illustrated and validated within use cases from three different EU-funded research projects in the fields of (1 Industry 4.0, (2 e-learning and (3 cloud computing. The paper discusses the approach, the evaluation results and derived outlooks.

Testing an integral conceptual model of frailty.

Science.gov (United States)

Gobbens, Robbert J; van Assen, Marcel A; Luijkx, Katrien G; Schols, Jos M

2012-09-01

This paper is a report of a study conducted to test three hypotheses derived from an integral conceptual model of frailty.   The integral model of frailty describes the pathway from life-course determinants to frailty to adverse outcomes. The model assumes that life-course determinants and the three domains of frailty (physical, psychological, social) affect adverse outcomes, the effect of disease(s) on adverse outcomes is mediated by frailty, and the effect of frailty on adverse outcomes depends on the life-course determinants. In June 2008 a questionnaire was sent to a sample of community-dwelling people, aged 75 years and older (n = 213). Life-course determinants and frailty were assessed using the Tilburg frailty indicator. Adverse outcomes were measured using the Groningen activity restriction scale, the WHOQOL-BREF and questions regarding healthcare utilization. The effect of seven self-reported chronic diseases was examined. Life-course determinants, chronic disease(s), and frailty together explain a moderate to large part of the variance of the seven continuous adverse outcomes (26-57%). All these predictors together explained a significant part of each of the five dichotomous adverse outcomes. The effect of chronic disease(s) on all 12 adverse outcomes was mediated at least partly by frailty. The effect of frailty domains on adverse outcomes did not depend on life-course determinants. Our finding that the adverse outcomes are differently and uniquely affected by the three domains of frailty (physical, psychological, social), and life-course determinants and disease(s), emphasizes the importance of an integral conceptual model of frailty. © 2011 Blackwell Publishing Ltd.

Conceptual geohydrological model of the separations area

International Nuclear Information System (INIS)

Root, R.W.; Marine, I.W.

1977-01-01

Subsurface drilling in and around the Separations Areas (F-Area and H-Area of the Savannah River Plant) is providing detailed information for a conceptual model of the geology and hydrology underlying these areas. This conceptual model will provide the framework needed for a mathematical model of groundwater movement beneath these areas. Existing information substantiates the presence of two areally extensive clay layers and several discontinuous clay and sandy-clay layers. These layers occur in and between beds of clayey and silty sand that make up most of the subsurface material. Within these sand beds are geologic units of differing hydraulic conductivity. For the present scale of the model, the subsurface information is considered adequate in H-Area, but additional drilling is planned in F-Area

Validation of the Continuum of Care Conceptual Model for Athletic Therapy

Directory of Open Access Journals (Sweden)

Mark R. Lafave

2015-01-01

Full Text Available Utilization of conceptual models in field-based emergency care currently borrows from existing standards of medical and paramedical professions. The purpose of this study was to develop and validate a comprehensive conceptual model that could account for injuries ranging from nonurgent to catastrophic events including events that do not follow traditional medical or prehospital care protocols. The conceptual model should represent the continuum of care from the time of initial injury spanning to an athlete’s return to participation in their sport. Finally, the conceptual model should accommodate both novices and experts in the AT profession. This paper chronicles the content validation steps of the Continuum of Care Conceptual Model for Athletic Therapy (CCCM-AT. The stages of model development were domain and item generation, content expert validation using a three-stage modified Ebel procedure, and pilot testing. Only the final stage of the modified Ebel procedure reached a priori 80% consensus on three domains of interest: (1 heading descriptors; (2 the order of the model; (3 the conceptual model as a whole. Future research is required to test the use of the CCCM-AT in order to understand its efficacy in teaching and practice within the AT discipline.

Conceptual Framework To Extend Life Cycle Assessment Using Near-Field Human Exposure Modeling and High-Throughput Tools for Chemicals

Science.gov (United States)

Life Cycle Assessment (LCA) is a decision-making tool that accounts for multiple impacts across the life cycle of a product or service. This paper presents a conceptual framework to integrate human health impact assessment with risk screening approaches to extend LCA to include n...

Tumor heterogeneity and progression: conceptual foundations for modeling.

Science.gov (United States)

Greller, L D; Tobin, F L; Poste, G

1996-01-01

A conceptual foundation for modeling tumor progression, growth, and heterogeneity is presented. The purpose of such models is to aid understanding, test ideas, formulate experiments, and to model cancer 'in machina' to address the dynamic features of tumor cell heterogeneity, progression, and growth. The descriptive capabilities of such an approach provides a consistent language for qualitatively reasoning about tumor behavior. This approach provides a schema for building conceptual models that combine three key phenomenological driving elements: growth, progression, and genetic instability. The growth element encompasses processes contributing to changes in tumor bulk and is distinct from progression per se. The progression element subsumes a broad collection of processes underlying phenotypic progression. The genetics elements represents heritable changes which potentially affect tumor character and behavior. Models, conceptual and mathematical, can be built for different tumor situations by drawing upon the interaction of these three distinct driving elements. These models can be used as tools to explore a diversity of hypotheses concerning dynamic changes in cellular populations during tumor progression, including the generation of intratumor heterogeneity. Such models can also serve to guide experimentation and to gain insight into dynamic aspects of complex tumor behavior.

Conceptual Model of Dynamic Geographic Environment

Directory of Open Access Journals (Sweden)

Martínez-Rosales Miguel Alejandro

2014-04-01

Full Text Available In geographic environments, there are many and different types of geographic entities such as automobiles, trees, persons, buildings, storms, hurricanes, etc. These entities can be classified into two groups: geographic objects and geographic phenomena. By its nature, a geographic environment is dynamic, thus, it’s static modeling is not sufficient. Considering the dynamics of geographic environment, a new type of geographic entity called event is introduced. The primary target is a modeling of geographic environment as an event sequence, because in this case the semantic relations are much richer than in the case of static modeling. In this work, the conceptualization of this model is proposed. It is based on the idea to process each entity apart instead of processing the environment as a whole. After that, the so called history of each entity and its spatial relations to other entities are defined to describe the whole environment. The main goal is to model systems at a conceptual level that make use of spatial and temporal information, so that later it can serve as the semantic engine for such systems.

Assessing students’ conceptual knowledge of electricity and magnetism

Directory of Open Access Journals (Sweden)

Michele W. McColgan

2017-10-01

Full Text Available We present the Electricity and Magnetism Conceptual Assessment (EMCA, a new assessment aligned with second-semester introductory physics courses. Topics covered include electrostatics, electric fields, circuits, magnetism, and induction. We have two motives for writing a new assessment. First, we find other assessments such as the Brief Electricity and Magnetism Assessment and the Conceptual Survey on Electricity and Magnetism not well aligned with the topics and content depth of our courses. We want to test introductory physics content at a level appropriate for our students. Second, we want the assessment to yield scores and gains comparable to the widely used Force Concept Inventory (FCI. After five testing and revision cycles, the assessment was finalized in early 2015 and is available online. We present performance results for a cohort of 225 students at Siena College who were enrolled in our algebra- and calculus-based physics courses during the spring 2015 and 2016 semesters. We provide pretest, post-test, and gain analyses, as well as individual question and whole test statistics to quantify difficulty and reliability. In addition, we compare EMCA and FCI scores and gains, and we find that students’ FCI scores are strongly correlated with their performance on the EMCA. Finally, the assessment was piloted in an algebra-based physics course at George Washington University (GWU. We present performance results for a cohort of 130 GWU students and we find that their EMCA scores are comparable to the scores of students in our calculus-based physics course.

Driver Performance Model: 1. Conceptual Framework

National Research Council Canada - National Science Library

Heimerl, Joseph

2001-01-01

...'. At the present time, no such comprehensive model exists. This report discusses a conceptual framework designed to encompass the relationships, conditions, and constraints related to direct, indirect, and remote modes of driving and thus provides a guide or 'road map' for the construction and creation of a comprehensive driver performance model.

The ACTIVE conceptual framework as a structural equation model

Science.gov (United States)

Gross, Alden L.; Payne, Brennan R.; Casanova, Ramon; Davoudzadeh, Pega; Dzierzewski, Joseph M.; Farias, Sarah; Giovannetti, Tania; Ip, Edward H.; Marsiske, Michael; Rebok, George W.; Schaie, K. Warner; Thomas, Kelsey; Willis, Sherry; Jones, Richard N.

2018-01-01

Background/Study Context Conceptual frameworks are analytic models at a high level of abstraction. Their operationalization can inform randomized trial design and sample size considerations. Methods The Advanced Cognitive Training for Independent and Vital Elderly (ACTIVE) conceptual framework was empirically tested using structural equation modeling (N=2,802). ACTIVE was guided by a conceptual framework for cognitive training in which proximal cognitive abilities (memory, inductive reasoning, speed of processing) mediate treatment-related improvement in primary outcomes (everyday problem-solving, difficulty with activities of daily living, everyday speed, driving difficulty), which in turn lead to improved secondary outcomes (health-related quality of life, health service utilization, mobility). Measurement models for each proximal, primary, and secondary outcome were developed and tested using baseline data. Each construct was then combined in one model to evaluate fit (RMSEA, CFI, normalized residuals of each indicator). To expand the conceptual model and potentially inform future trials, evidence of modification of structural model parameters was evaluated by age, years of education, sex, race, and self-rated health status. Results Preconceived measurement models for memory, reasoning, speed of processing, everyday problem-solving, instrumental activities of daily living (IADL) difficulty, everyday speed, driving difficulty, and health-related quality of life each fit well to the data (all RMSEA .95). Fit of the full model was excellent (RMSEA = .038; CFI = .924). In contrast with previous findings from ACTIVE regarding who benefits from training, interaction testing revealed associations between proximal abilities and primary outcomes are stronger on average by nonwhite race, worse health, older age, and less education (p conceptual model. Findings suggest that the types of people who show intervention effects on cognitive performance potentially may be

The ACTIVE conceptual framework as a structural equation model.

Science.gov (United States)

Gross, Alden L; Payne, Brennan R; Casanova, Ramon; Davoudzadeh, Pega; Dzierzewski, Joseph M; Farias, Sarah; Giovannetti, Tania; Ip, Edward H; Marsiske, Michael; Rebok, George W; Schaie, K Warner; Thomas, Kelsey; Willis, Sherry; Jones, Richard N

2018-01-01

Background/Study Context: Conceptual frameworks are analytic models at a high level of abstraction. Their operationalization can inform randomized trial design and sample size considerations. The Advanced Cognitive Training for Independent and Vital Elderly (ACTIVE) conceptual framework was empirically tested using structural equation modeling (N=2,802). ACTIVE was guided by a conceptual framework for cognitive training in which proximal cognitive abilities (memory, inductive reasoning, speed of processing) mediate treatment-related improvement in primary outcomes (everyday problem-solving, difficulty with activities of daily living, everyday speed, driving difficulty), which in turn lead to improved secondary outcomes (health-related quality of life, health service utilization, mobility). Measurement models for each proximal, primary, and secondary outcome were developed and tested using baseline data. Each construct was then combined in one model to evaluate fit (RMSEA, CFI, normalized residuals of each indicator). To expand the conceptual model and potentially inform future trials, evidence of modification of structural model parameters was evaluated by age, years of education, sex, race, and self-rated health status. Preconceived measurement models for memory, reasoning, speed of processing, everyday problem-solving, instrumental activities of daily living (IADL) difficulty, everyday speed, driving difficulty, and health-related quality of life each fit well to the data (all RMSEA .95). Fit of the full model was excellent (RMSEA = .038; CFI = .924). In contrast with previous findings from ACTIVE regarding who benefits from training, interaction testing revealed associations between proximal abilities and primary outcomes are stronger on average by nonwhite race, worse health, older age, and less education (p conceptual model. Findings suggest that the types of people who show intervention effects on cognitive performance potentially may be different from

Conceptual Models as Tools for Communication Across Disciplines

Directory of Open Access Journals (Sweden)

Marieke Heemskerk

2003-12-01

Full Text Available To better understand and manage complex social-ecological systems, social scientists and ecologists must collaborate. However, issues related to language and research approaches can make it hard for researchers in different fields to work together. This paper suggests that researchers can improve interdisciplinary science through the use of conceptual models as a communication tool. The authors share lessons from a workshop in which interdisciplinary teams of young scientists developed conceptual models of social-ecological systems using data sets and metadata from Long-Term Ecological Research sites across the United States. Both the process of model building and the models that were created are discussed. The exercise revealed that the presence of social scientists in a group influenced the place and role of people in the models. This finding suggests that the participation of both ecologists and social scientists in the early stages of project development may produce better questions and more accurate models of interactions between humans and ecosystems. Although the participants agreed that a better understanding of human intentions and behavior would advance ecosystem science, they felt that interdisciplinary research might gain more by training strong disciplinarians than by merging ecology and social sciences into a new field. It is concluded that conceptual models can provide an inspiring point of departure and a guiding principle for interdisciplinary group discussions. Jointly developing a model not only helped the participants to formulate questions, clarify system boundaries, and identify gaps in existing data, but also revealed the thoughts and assumptions of fellow scientists. Although the use of conceptual models will not serve all purposes, the process of model building can help scientists, policy makers, and resource managers discuss applied problems and theory among themselves and with those in other areas.

GEOQUIMICO : an interactive tool for comparing sorption conceptual models (surface complexation modeling versus K[D])

International Nuclear Information System (INIS)

Hammond, Glenn E.; Cygan, Randall Timothy

2007-01-01

Within reactive geochemical transport, several conceptual models exist for simulating sorption processes in the subsurface. Historically, the K D approach has been the method of choice due to ease of implementation within a reactive transport model and straightforward comparison with experimental data. However, for modeling complex sorption phenomenon (e.g. sorption of radionuclides onto mineral surfaces), this approach does not systematically account for variations in location, time, or chemical conditions, and more sophisticated methods such as a surface complexation model (SCM) must be utilized. It is critical to determine which conceptual model to use; that is, when the material variation becomes important to regulatory decisions. The geochemical transport tool GEOQUIMICO has been developed to assist in this decision-making process. GEOQUIMICO provides a user-friendly framework for comparing the accuracy and performance of sorption conceptual models. The model currently supports the K D and SCM conceptual models. The code is written in the object-oriented Java programming language to facilitate model development and improve code portability. The basic theory underlying geochemical transport and the sorption conceptual models noted above is presented in this report. Explanations are provided of how these physicochemical processes are instrumented in GEOQUIMICO and a brief verification study comparing GEOQUIMICO results to data found in the literature is given

Supporting Intrapersonal Development in Substance Use Disorder Programs: A Conceptual Framework for Client Assessment.

Science.gov (United States)

Turpin, Aaron; Shier, Micheal L

2017-01-01

Improvements to intrapersonal development of clients involved with substance use disorder treatment programs has widely been recognized as contributing to the intended goal of reducing substance misuse behaviors. This study sought to identify a broad framework of primary outcomes related to the intrapersonal development of clients in treatment for substance misuse. Using qualitative research methods, individual interviews were conducted with program participants (n = 41) at three treatment programs to identify the ways in which respondents experienced intrapersonal development through participation in treatment. The findings support the development of a conceptual model that captures the importance and manifestation of achieving improvements in the following outcomes: self-awareness, coping ability, self-worth, outlook, and self-determination. The findings provide a conceptual framework for client assessment that captures a broad range of the important intrapersonal development factors utilized as indicators for client development and recovery that should be measured in tandem during assessment.

Process generalization in conceptual models

NARCIS (Netherlands)

Wieringa, Roelf J.

In conceptual modeling, the universe of discourse (UoD) is divided into classes which have a taxonomic structure. The classes are usually defined in terms of attributes (all objects in a class share attribute names) and possibly of events. For enmple, the class of employees is the set of objects to

Conceptual model to determine maximum activity of radioactive waste in near-surface disposal facilities

International Nuclear Information System (INIS)

Iarmosh, I.; Olkhovyk, Yu.

2016-01-01

For development of the management strategy for radioactive waste to be placed in near - surface disposal facilities (NSDF), it is necessary to justify long - term safety of such facilities. Use of mathematical modelling methods for long - term forecasts of radwaste radiation impact and assessment of radiation risks from radionuclides migration can help to resolve this issue. The purpose of the research was to develop the conceptual model for determining the maximum activity of radwaste to be safely disposed in the NSDF and to test it in the case of Lot 3 Vector NSDF (Chornobyl exclusion zone). This paper describes an approach to the development of such a model. The conceptual model of "9"0 Sr migration from Lot 3 through aeration zone and aquifer soils was developed. The results of modelling are shown. The proposals on further steps for the model improvement were developed

A Proposed Conceptual Model of Military Medical Readiness

National Research Council Canada - National Science Library

Van Hall, Brian M

2007-01-01

.... The basis for the proposed conceptual model builds on common and accepted latent variable and theoretical modeling techniques proposed by healthcare scholars, organizational theorists, mathematical...

Tolerance of uncertainty: Conceptual analysis, integrative model, and implications for healthcare.

Science.gov (United States)

Hillen, Marij A; Gutheil, Caitlin M; Strout, Tania D; Smets, Ellen M A; Han, Paul K J

2017-05-01

Uncertainty tolerance (UT) is an important, well-studied phenomenon in health care and many other important domains of life, yet its conceptualization and measurement by researchers in various disciplines have varied substantially and its essential nature remains unclear. The objectives of this study were to: 1) analyze the meaning and logical coherence of UT as conceptualized by developers of UT measures, and 2) develop an integrative conceptual model to guide future empirical research regarding the nature, causes, and effects of UT. A narrative review and conceptual analysis of 18 existing measures of Uncertainty and Ambiguity Tolerance was conducted, focusing on how measure developers in various fields have defined both the "uncertainty" and "tolerance" components of UT-both explicitly through their writings and implicitly through the items constituting their measures. Both explicit and implicit conceptual definitions of uncertainty and tolerance vary substantially and are often poorly and inconsistently specified. A logically coherent, unified understanding or theoretical model of UT is lacking. To address these gaps, we propose a new integrative definition and multidimensional conceptual model that construes UT as the set of negative and positive psychological responses-cognitive, emotional, and behavioral-provoked by the conscious awareness of ignorance about particular aspects of the world. This model synthesizes insights from various disciplines and provides an organizing framework for future research. We discuss how this model can facilitate further empirical and theoretical research to better measure and understand the nature, determinants, and outcomes of UT in health care and other domains of life. Uncertainty tolerance is an important and complex phenomenon requiring more precise and consistent definition. An integrative definition and conceptual model, intended as a tentative and flexible point of departure for future research, adds needed breadth

Analysis of Subjective Conceptualizations Towards Collective Conceptual Modelling

DEFF Research Database (Denmark)

Glückstad, Fumiko Kano; Herlau, Tue; Schmidt, Mikkel Nørgaard

2013-01-01

This work is conducted as a preliminary study for a project where individuals' conceptualizations of domain knowledge will thoroughly be analyzed across 150 subjects from 6 countries. The project aims at investigating how humans' conceptualizations differ according to different types of mother la...

Lessons from a large-scale assessment: Results from conceptual inventories

Directory of Open Access Journals (Sweden)

Beth Thacker

2014-07-01

Full Text Available We report conceptual inventory results of a large-scale assessment project at a large university. We studied the introduction of materials and instructional methods informed by physics education research (PER (physics education research-informed materials into a department where most instruction has previously been traditional and a significant number of faculty are hesitant, ambivalent, or even resistant to the introduction of such reforms. Data were collected in all of the sections of both the large algebra- and calculus-based introductory courses for a number of years employing commonly used conceptual inventories. Results from a small PER-informed, inquiry-based, laboratory-based class are also reported. Results suggest that when PER-informed materials are introduced in the labs and recitations, independent of the lecture style, there is an increase in students’ conceptual inventory gains. There is also an increase in the results on conceptual inventories if PER-informed instruction is used in the lecture. The highest conceptual inventory gains were achieved by the combination of PER-informed lectures and laboratories in large class settings and by the hands-on, laboratory-based, inquiry-based course taught in a small class setting.

Developing rural palliative care: validating a conceptual model.

Science.gov (United States)

Kelley, Mary Lou; Williams, Allison; DeMiglio, Lily; Mettam, Hilary

2011-01-01

The purpose of this research was to validate a conceptual model for developing palliative care in rural communities. This model articulates how local rural healthcare providers develop palliative care services according to four sequential phases. The model has roots in concepts of community capacity development, evolves from collaborative, generalist rural practice, and utilizes existing health services infrastructure. It addresses how rural providers manage challenges, specifically those related to: lack of resources, minimal community understanding of palliative care, health professionals' resistance, the bureaucracy of the health system, and the obstacles of providing services in rural environments. Seven semi-structured focus groups were conducted with interdisciplinary health providers in 7 rural communities in two Canadian provinces. Using a constant comparative analysis approach, focus group data were analyzed by examining participants' statements in relation to the model and comparing emerging themes in the development of rural palliative care to the elements of the model. The data validated the conceptual model as the model was able to theoretically predict and explain the experiences of the 7 rural communities that participated in the study. New emerging themes from the data elaborated existing elements in the model and informed the requirement for minor revisions. The model was validated and slightly revised, as suggested by the data. The model was confirmed as being a useful theoretical tool for conceptualizing the development of rural palliative care that is applicable in diverse rural communities.

Reducing structural uncertainty in conceptual hydrological modeling in the semi-arid Andes

Science.gov (United States)

Hublart, P.; Ruelland, D.; Dezetter, A.; Jourde, H.

2014-10-01

The use of lumped, conceptual models in hydrological impact studies requires placing more emphasis on the uncertainty arising from deficiencies and/or ambiguities in the model structure. This study provides an opportunity to combine a multiple-hypothesis framework with a multi-criteria assessment scheme to reduce structural uncertainty in the conceptual modeling of a meso-scale Andean catchment (1515 km2) over a 30 year period (1982-2011). The modeling process was decomposed into six model-building decisions related to the following aspects of the system behavior: snow accumulation and melt, runoff generation, redistribution and delay of water fluxes, and natural storage effects. Each of these decisions was provided with a set of alternative modeling options, resulting in a total of 72 competing model structures. These structures were calibrated using the concept of Pareto optimality with three criteria pertaining to streamflow simulations and one to the seasonal dynamics of snow processes. The results were analyzed in the four-dimensional space of performance measures using a fuzzy c-means clustering technique and a differential split sample test, leading to identify 14 equally acceptable model hypotheses. A filtering approach was then applied to these best-performing structures in order to minimize the overall uncertainty envelope while maximizing the number of enclosed observations. This led to retain 8 model hypotheses as a representation of the minimum structural uncertainty that could be obtained with this modeling framework. Future work to better consider model predictive uncertainty should include a proper assessment of parameter equifinality and data errors, as well as the testing of new or refined hypotheses to allow for the use of additional auxiliary observations.

Reducing structural uncertainty in conceptual hydrological modelling in the semi-arid Andes

Science.gov (United States)

Hublart, P.; Ruelland, D.; Dezetter, A.; Jourde, H.

2015-05-01

The use of lumped, conceptual models in hydrological impact studies requires placing more emphasis on the uncertainty arising from deficiencies and/or ambiguities in the model structure. This study provides an opportunity to combine a multiple-hypothesis framework with a multi-criteria assessment scheme to reduce structural uncertainty in the conceptual modelling of a mesoscale Andean catchment (1515 km2) over a 30-year period (1982-2011). The modelling process was decomposed into six model-building decisions related to the following aspects of the system behaviour: snow accumulation and melt, runoff generation, redistribution and delay of water fluxes, and natural storage effects. Each of these decisions was provided with a set of alternative modelling options, resulting in a total of 72 competing model structures. These structures were calibrated using the concept of Pareto optimality with three criteria pertaining to streamflow simulations and one to the seasonal dynamics of snow processes. The results were analyzed in the four-dimensional (4-D) space of performance measures using a fuzzy c-means clustering technique and a differential split sample test, leading to identify 14 equally acceptable model hypotheses. A filtering approach was then applied to these best-performing structures in order to minimize the overall uncertainty envelope while maximizing the number of enclosed observations. This led to retain eight model hypotheses as a representation of the minimum structural uncertainty that could be obtained with this modelling framework. Future work to better consider model predictive uncertainty should include a proper assessment of parameter equifinality and data errors, as well as the testing of new or refined hypotheses to allow for the use of additional auxiliary observations.

Scaling studies and conceptual experiment designs for NGNP CFD assessment

Energy Technology Data Exchange (ETDEWEB)

D. M. McEligot; G. E. McCreery

2004-11-01

The objective of this report is to document scaling studies and conceptual designs for flow and heat transfer experiments intended to assess CFD codes and their turbulence models proposed for application to prismatic NGNP concepts. The general approach of the project is to develop new benchmark experiments for assessment in parallel with CFD and coupled CFD/systems code calculations for the same geometry. Two aspects of the complex flow in an NGNP are being addressed: (1) flow and thermal mixing in the lower plenum ("hot streaking" issue) and (2) turbulence and resulting temperature distributions in reactor cooling channels ("hot channel" issue). Current prismatic NGNP concepts are being examined to identify their proposed flow conditions and geometries over the range from normal operation to decay heat removal in a pressurized cooldown. Approximate analyses have been applied to determine key non-dimensional parameters and their magnitudes over this operating range. For normal operation, the flow in the coolant channels can be considered to be dominant turbulent forced convection with slight transverse property variation. In a pressurized cooldown (LOFA) simulation, the flow quickly becomes laminar with some possible buoyancy influences. The flow in the lower plenum can locally be considered to be a situation of multiple hot jets into a confined crossflow -- with obstructions. Flow is expected to be turbulent with momentumdominated turbulent jets entering; buoyancy influences are estimated to be negligible in normal full power operation. Experiments are needed for the combined features of the lower plenum flows. Missing from the typical jet experiments available are interactions with nearby circular posts and with vertical posts in the vicinity of vertical walls - with near stagnant surroundings at one extreme and significant crossflow at the other. Two types of heat transfer experiments are being considered. One addresses the "hot channel" problem, if necessary

The treatment of conceptual model uncertainty in the Nagra programme: a few examples

International Nuclear Information System (INIS)

Zuidema, P.; Gautschi, A.; Smith, P.; Vomvoris, S.

1995-01-01

In this paper, a few examples are discussed which demonstrate how conceptual model uncertainty is treated within the Nagra programme. These examples cover geometric aspects, small-scale properties of the host rock and direction of the flow paths. Based on the examples, the pragmatic approach adopted in performance assessment is briefly discussed. (author). 3 refs., 7 figs

A Conceptual Framework for the Assessment of Cumulative Exposure to Air Pollution at a Fine Spatial Scale

Directory of Open Access Journals (Sweden)

Kihal-Talantikite Wahida

2016-03-01

Full Text Available Many epidemiological studies examining long-term health effects of exposure to air pollutants have characterized exposure by the outdoor air concentrations at sites that may be distant to subjects’ residences at different points in time. The temporal and spatial mobility of subjects and the spatial scale of exposure assessment could thus lead to misclassification in the cumulative exposure estimation. This paper attempts to fill the gap regarding cumulative exposure assessment to air pollution at a fine spatial scale in epidemiological studies investigating long-term health effects. We propose a conceptual framework showing how major difficulties in cumulative long-term exposure assessment could be surmounted. We then illustrate this conceptual model on the case of exposure to NO2 following two steps: (i retrospective reconstitution of NO2 concentrations at a fine spatial scale; and (ii a novel approach to assigning the time-relevant exposure estimates at the census block level, using all available data on residential mobility throughout a 10- to 20-year period prior to that for which the health events are to be detected. Our conceptual framework is both flexible and convenient for the needs of different epidemiological study designs.

A Conceptual Framework for the Assessment of Cumulative Exposure to Air Pollution at a Fine Spatial Scale

Science.gov (United States)

Wahida, Kihal-Talantikite; Padilla, Cindy M.; Denis, Zmirou-Navier; Olivier, Blanchard; Géraldine, Le Nir; Philippe, Quenel; Séverine, Deguen

2016-01-01

Many epidemiological studies examining long-term health effects of exposure to air pollutants have characterized exposure by the outdoor air concentrations at sites that may be distant to subjects’ residences at different points in time. The temporal and spatial mobility of subjects and the spatial scale of exposure assessment could thus lead to misclassification in the cumulative exposure estimation. This paper attempts to fill the gap regarding cumulative exposure assessment to air pollution at a fine spatial scale in epidemiological studies investigating long-term health effects. We propose a conceptual framework showing how major difficulties in cumulative long-term exposure assessment could be surmounted. We then illustrate this conceptual model on the case of exposure to NO2 following two steps: (i) retrospective reconstitution of NO2 concentrations at a fine spatial scale; and (ii) a novel approach to assigning the time-relevant exposure estimates at the census block level, using all available data on residential mobility throughout a 10- to 20-year period prior to that for which the health events are to be detected. Our conceptual framework is both flexible and convenient for the needs of different epidemiological study designs. PMID:26999170

Modelling requirements for future assessments based on FEP analysis

International Nuclear Information System (INIS)

Locke, J.; Bailey, L.

1998-01-01

This report forms part of a suite of documents describing the Nirex model development programme. The programme is designed to provide a clear audit trail from the identification of significant features, events and processes (FEPs) to the models and modelling processes employed within a detailed safety assessment. A scenario approach to performance assessment has been adopted. It is proposed that potential evolutions of a deep geological radioactive waste repository can be represented by a base scenario and a number of variant scenarios. The base scenario is chosen to be broad-ranging and to represent the natural evolution of the repository system and its surrounding environment. The base scenario is defined to include all those FEPs that are certain to occur and those which are judged likely to occur for a significant period of the assessment timescale. The structuring of FEPs on a Master Directed Diagram (MDD) provides a systematic framework for identifying those FEPs that form part of the natural evolution of the system and those, which may define alternative potential evolutions of the repository system. In order to construct a description of the base scenario, FEPs have been grouped into a series of conceptual models. Conceptual models are groups of FEPs, identified from the MDD, representing a specific component or process within the disposal system. It has been found appropriate to define conceptual models in terms of the three main components of the disposal system: the repository engineered system, the surrounding geosphere and the biosphere. For each of these components, conceptual models provide a description of the relevant subsystem in terms of its initial characteristics, subsequent evolution and the processes affecting radionuclide transport for the groundwater and gas pathways. The aim of this document is to present the methodology that has been developed for deriving modelling requirements and to illustrate the application of the methodology by

Non-monotonic reasoning in conceptual modeling and ontology design: A proposal

CSIR Research Space (South Africa)

Casini, G

2013-06-01

Full Text Available -1 2nd International Workshop on Ontologies and Conceptual Modeling (Onto.Com 2013), Valencia, Spain, 17-21 June 2013 Non-monotonic reasoning in conceptual modeling and ontology design: A proposal Giovanni Casini1 and Alessandro Mosca2 1...

Conceptual language models for domain-specific retrieval

NARCIS (Netherlands)

Meij, E.; Trieschnigg, D.; de Rijke, M.; Kraaij, W.

2010-01-01

Over the years, various meta-languages have been used to manually enrich documents with conceptual knowledge of some kind. Examples include keyword assignment to citations or, more recently, tags to websites. In this paper we propose generative concept models as an extension to query modeling within

Performance Assessment Strategies: A computational framework for conceptual design of large roofs

Directory of Open Access Journals (Sweden)

Michela Turrin

2014-01-01

Full Text Available Using engineering performance evaluations to explore design alternatives during the conceptual phase of architectural design helps to understand the relationships between form and performance; and is crucial for developing well-performing final designs. Computer aided conceptual design has the potential to aid the design team in discovering and highlighting these relationships; especially by means of procedural and parametric geometry to support the generation of geometric design, and building performance simulation tools to support performance assessments. However, current tools and methods for computer aided conceptual design in architecture do not explicitly reveal nor allow for backtracking the relationships between performance and geometry of the design. They currently support post-engineering, rather than the early design decisions and the design exploration process. Focusing on large roofs, this research aims at developing a computational design approach to support designers in performance driven explorations. The approach is meant to facilitate the multidisciplinary integration and the learning process of the designer; and not to constrain the process in precompiled procedures or in hard engineering formulations, nor to automatize it by delegating the design creativity to computational procedures. PAS (Performance Assessment Strategies as a method is the main output of the research. It consists of a framework including guidelines and an extensible library of procedures for parametric modelling. It is structured on three parts. Pre-PAS provides guidelines for a design strategy-definition, toward the parameterization process. Model-PAS provides guidelines, procedures and scripts for building the parametric models. Explore-PAS supports the solutions-assessment based on numeric evaluations and performance simulations, until the identification of a suitable design solution. PAS has been developed based on action research. Several case studies

Toolkit for Conceptual Modeling (TCM): User's Guide and Reference

NARCIS (Netherlands)

Dehne, F.; Wieringa, Roelf J.

1997-01-01

The Toolkit for Conceptual Modeling (TCM) is a suite of graphical editors for a number of graphical notation systems that are used in software specification methods. The notations can be used to represent the conceptual structure of the software - hence the name of the suite. This manual describes

A Conceptual Model of Military Recruitment

Science.gov (United States)

2009-10-01

Hiring Expectancies – Expectancy (VIE) Theory ( Vroom , 1996) states individuals choose among a set of employment alternatives on the basis of the...A Conceptual Model of Military Recruitment Presented at NATO Technical Course HFM 180 – Strategies to Address Recruiting and Retention Issues in...the Military Fariya Syed October, 2009 Based on A Proposed Model Of Military Recruitment (Schreurs & Syed, 2007) Report Documentation Page

Towards a Model of Technology Adoption: A Conceptual Model Proposition

Science.gov (United States)

Costello, Pat; Moreton, Rob

A conceptual model for Information Communication Technology (ICT) adoption by Small Medium Enterprises (SMEs) is proposed. The research uses several ICT adoption models as its basis with theoretical underpinning provided by the Diffusion of Innovation theory and the Technology Acceptance Model (TAM). Taking an exploratory research approach the model was investigated amongst 200 SMEs whose core business is ICT. Evidence from this study demonstrates that these SMEs face the same issues as all other industry sectors. This work points out weaknesses in SMEs environments regarding ICT adoption and suggests what they may need to do to increase the success rate of any proposed adoption. The methodology for development of the framework is described and recommendations made for improved Government-led ICT adoption initiatives. Application of the general methodology has resulted in new opportunities to embed the ethos and culture surrounding the issues into the framework of new projects developed as a result of Government intervention. A conceptual model is proposed that may lead to a deeper understanding of the issues under consideration.

A Conceptual Model of Irritability Following Traumatic Brain Injury: A Qualitative, Participatory Research Study.

Science.gov (United States)

Hammond, Flora M; Davis, Christine; Cook, James R; Philbrick, Peggy; Hirsch, Mark A

2016-01-01

Individuals with a history of traumatic brain injury (TBI) may have chronic problems with irritability, which can negatively affect their lives. (1) To describe the experience (thoughts and feelings) of irritability from the perspectives of multiple people living with or affected by the problem, and (2) to develop a conceptual model of irritability. Qualitative, participatory research. Forty-four stakeholders (individuals with a history of TBI, family members, community professionals, healthcare providers, and researchers) divided into 5 focus groups. Each group met 10 times to discuss the experience of irritability following TBI. Data were coded using grounded theory to develop themes, metacodes, and theories. Not applicable. A conceptual model emerged in which irritability has 5 dimensions: affective (related to moods and feelings); behavioral (especially in areas of self-regulation, impulse control, and time management); cognitive-perceptual (self-talk and ways of seeing the world); relational issues (interpersonal and family dynamics); and environmental (including environmental stimuli, change, disruptions in routine, and cultural expectations). This multidimensional model provides a framework for assessment, treatment, and future research aimed at better understanding irritability, as well as the development of assessment tools and treatment interventions.

BUILDING CONCEPTUAL AND MATHEMATICAL MODEL FOR WATER FLOW AND SOLUTE TRANSPORT IN THE UNSATURATED ZONE AT KOSNICA SITE

Directory of Open Access Journals (Sweden)

Stanko Ružičić

2012-12-01

Full Text Available Conceptual model of flow and solute transport in unsaturated zone at Kosnica site, which is the basis for modeling pollution migration through the unsaturated zone to groundwater, is set up. The main characteristics of the unsaturated zone of the Kosnica site are described. Detailed description of investigated profile of unsaturated zone, with all necessary analytical results performed and used in building of conceptual models, is presented. Experiments that are in progress and processes which are modeled are stated. Monitoring of parameters necessary for calibration of models is presented. The ultimate goal of research is risk assessment of groundwater contamination at Kosnica site that has its source in or on unsaturated zone.

A conceptual modeling framework for discrete event simulation using hierarchical control structures.

Science.gov (United States)

Furian, N; O'Sullivan, M; Walker, C; Vössner, S; Neubacher, D

2015-08-01

Conceptual Modeling (CM) is a fundamental step in a simulation project. Nevertheless, it is only recently that structured approaches towards the definition and formulation of conceptual models have gained importance in the Discrete Event Simulation (DES) community. As a consequence, frameworks and guidelines for applying CM to DES have emerged and discussion of CM for DES is increasing. However, both the organization of model-components and the identification of behavior and system control from standard CM approaches have shortcomings that limit CM's applicability to DES. Therefore, we discuss the different aspects of previous CM frameworks and identify their limitations. Further, we present the Hierarchical Control Conceptual Modeling framework that pays more attention to the identification of a models' system behavior, control policies and dispatching routines and their structured representation within a conceptual model. The framework guides the user step-by-step through the modeling process and is illustrated by a worked example.

Dynamic knowledge representation using agent-based modeling: ontology instantiation and verification of conceptual models.

Science.gov (United States)

An, Gary

2009-01-01

The sheer volume of biomedical research threatens to overwhelm the capacity of individuals to effectively process this information. Adding to this challenge is the multiscale nature of both biological systems and the research community as a whole. Given this volume and rate of generation of biomedical information, the research community must develop methods for robust representation of knowledge in order for individuals, and the community as a whole, to "know what they know." Despite increasing emphasis on "data-driven" research, the fact remains that researchers guide their research using intuitively constructed conceptual models derived from knowledge extracted from publications, knowledge that is generally qualitatively expressed using natural language. Agent-based modeling (ABM) is a computational modeling method that is suited to translating the knowledge expressed in biomedical texts into dynamic representations of the conceptual models generated by researchers. The hierarchical object-class orientation of ABM maps well to biomedical ontological structures, facilitating the translation of ontologies into instantiated models. Furthermore, ABM is suited to producing the nonintuitive behaviors that often "break" conceptual models. Verification in this context is focused at determining the plausibility of a particular conceptual model, and qualitative knowledge representation is often sufficient for this goal. Thus, utilized in this fashion, ABM can provide a powerful adjunct to other computational methods within the research process, as well as providing a metamodeling framework to enhance the evolution of biomedical ontologies.

Conceptual Model of Quantities, Units, Dimensions, and Values

Science.gov (United States)

Rouquette, Nicolas F.; DeKoenig, Hans-Peter; Burkhart, Roger; Espinoza, Huascar

2011-01-01

JPL collaborated with experts from industry and other organizations to develop a conceptual model of quantities, units, dimensions, and values based on the current work of the ISO 80000 committee revising the International System of Units & Quantities based on the International Vocabulary of Metrology (VIM). By providing support for ISO 80000 in SysML via the International Vocabulary of Metrology (VIM), this conceptual model provides, for the first time, a standard-based approach for addressing issues of unit coherence and dimensional analysis into the practice of systems engineering with SysML-based tools. This conceptual model provides support for two kinds of analyses specified in the International Vocabulary of Metrology (VIM): coherence of units as well as of systems of units, and dimension analysis of systems of quantities. To provide a solid and stable foundation, the model for defining quantities, units, dimensions, and values in SysML is explicitly based on the concepts defined in VIM. At the same time, the model library is designed in such a way that extensions to the ISQ (International System of Quantities) and SI Units (Systeme International d Unites) can be represented, as well as any alternative systems of quantities and units. The model library can be used to support SysML user models in various ways. A simple approach is to define and document libraries of reusable systems of units and quantities for reuse across multiple projects, and to link units and quantity kinds from these libraries to Unit and QuantityKind stereotypes defined in SysML user models.

Personality Assessment of Global Talent: Conceptual and Methodological Issues

Science.gov (United States)

van de Vijver, Fons J. R.

2008-01-01

The recruitment of managers who will operate in a culturally heterogeneous context (as expatriate managers, managers in a global company, or managers of a multicultural workforce) is increasingly important in an age of globalization. This article describes conceptual and methodological issues in the assessment of such managers, notably in the…

Some concepts of model uncertainty for performance assessments of nuclear waste repositories

International Nuclear Information System (INIS)

Eisenberg, N.A.; Sagar, B.; Wittmeyer, G.W.

1994-01-01

Models of the performance of nuclear waste repositories will be central to making regulatory decisions regarding the safety of such facilities. The conceptual model of repository performance is represented by mathematical relationships, which are usually implemented as one or more computer codes. A geologic system may allow many conceptual models, which are consistent with the observations. These conceptual models may or may not have the same mathematical representation. Experiences in modeling the performance of a waste repository representation. Experiences in modeling the performance of a waste repository (which is, in part, a geologic system), show that this non-uniqueness of conceptual models is a significant source of model uncertainty. At the same time, each conceptual model has its own set of parameters and usually, it is not be possible to completely separate model uncertainty from parameter uncertainty for the repository system. Issues related to the origin of model uncertainty, its relation to parameter uncertainty, and its incorporation in safety assessments are discussed from a broad regulatory perspective. An extended example in which these issues are explored numerically is also provided

Penetration Testing Professional Ethics: a conceptual model and taxonomy

Directory of Open Access Journals (Sweden)

Justin Pierce

2006-05-01

Full Text Available In an environment where commercial software is continually patched to correct security flaws, penetration testing can provide organisations with a realistic assessment of their security posture. Penetration testing uses the same principles as criminal hackers to penetrate corporate networks and thereby verify the presence of software vulnerabilities. Network administrators can use the results of a penetration test to correct flaws and improve overall security. The use of hacking techniques, however, raises several ethical questions that centre on the integrity of the tester to maintain professional distance and uphold the profession. This paper discusses the ethics of penetration testing and presents our conceptual model and revised taxonomy.

A conceptual modeling framework for discrete event simulation using hierarchical control structures

Science.gov (United States)

Furian, N.; O’Sullivan, M.; Walker, C.; Vössner, S.; Neubacher, D.

2015-01-01

Conceptual Modeling (CM) is a fundamental step in a simulation project. Nevertheless, it is only recently that structured approaches towards the definition and formulation of conceptual models have gained importance in the Discrete Event Simulation (DES) community. As a consequence, frameworks and guidelines for applying CM to DES have emerged and discussion of CM for DES is increasing. However, both the organization of model-components and the identification of behavior and system control from standard CM approaches have shortcomings that limit CM’s applicability to DES. Therefore, we discuss the different aspects of previous CM frameworks and identify their limitations. Further, we present the Hierarchical Control Conceptual Modeling framework that pays more attention to the identification of a models’ system behavior, control policies and dispatching routines and their structured representation within a conceptual model. The framework guides the user step-by-step through the modeling process and is illustrated by a worked example. PMID:26778940

A conceptual gamma shield design using the DRP model computation

Energy Technology Data Exchange (ETDEWEB)

Ahmad, E E [Reactor Department, Nuclear Research Center, Atomic Energy Authority, Cairo (Egypt); Rahman, F A [National Center of Nuclear Safety and Radiation Control, Atomic Energy Authority, Cairo (Egypt)

1997-12-31

The purpose of this investigation is to assess basic areas of concern in the development of reactor shielding conceptual design calculations. A spherical shield model composed of low carbon steel and lead have been constructed to surround a Co-60 gamma point source. two alternative configurations have been considered in the model computation. The numerical calculations have been performed using both the ANISN code and DRP model computation together with the DLC 75-Bugle 80 data library. A resume of results for deep penetration in different shield materials with different packing densities is presented and analysed. The results showed that the gamma fluxes attenuation is increased with increasing distribution the packing density of the shield material which reflects its importance of considering it as a safety parameter in shielding design. 3 figs.

Towards methodical modelling: Differences between the structure and output dynamics of multiple conceptual models

Science.gov (United States)

Knoben, Wouter; Woods, Ross; Freer, Jim

2016-04-01

Conceptual hydrologic models consist of a certain arrangement of spatial and temporal dynamics consisting of stores, fluxes and transformation functions, depending on the modeller's choices and intended use. They have the advantages of being computationally efficient, being relatively easy model structures to reconfigure and having relatively low input data demands. This makes them well-suited for large-scale and large-sample hydrology, where appropriately representing the dominant hydrologic functions of a catchment is a main concern. Given these requirements, the number of parameters in the model cannot be too high, to avoid equifinality and identifiability issues. This limits the number and level of complexity of dominant hydrologic processes the model can represent. Specific purposes and places thus require a specific model and this has led to an abundance of conceptual hydrologic models. No structured overview of these models exists and there is no clear method to select appropriate model structures for different catchments. This study is a first step towards creating an overview of the elements that make up conceptual models, which may later assist a modeller in finding an appropriate model structure for a given catchment. To this end, this study brings together over 30 past and present conceptual models. The reviewed model structures are simply different configurations of three basic model elements (stores, fluxes and transformation functions), depending on the hydrologic processes the models are intended to represent. Differences also exist in the inner workings of the stores, fluxes and transformations, i.e. the mathematical formulations that describe each model element's intended behaviour. We investigate the hypothesis that different model structures can produce similar behavioural simulations. This can clarify the overview of model elements by grouping elements which are similar, which can improve model structure selection.

Assessing the Conceptual Understanding about Heat and Thermodynamics at Undergraduate Level

Science.gov (United States)

Kulkarni, Vasudeo Digambar; Tambade, Popat Savaleram

2013-01-01

In this study, a Thermodynamic Concept Test (TCT) was designed to assess student's conceptual understanding heat and thermodynamics at undergraduate level. The different statistical tests such as item difficulty index, item discrimination index, point biserial coefficient were used for assessing TCT. For each item of the test these indices were…

The relationship between the key elements of Donabedian's conceptual model within the field of assistive technology

DEFF Research Database (Denmark)

Sund, Terje; Iwarsson, Susanne; Brandt, Åse

2015-01-01

Previous research has suggested that there is a relationship between the three key components of Donabedian's conceptual model for quality assessments: structure of care, process, and outcome of care. That is, structure predicted both process and outcome of care, and better processes predict better...

An updated conceptual model of Delta Smelt biology: Our evolving understanding of an estuarine fish

Science.gov (United States)

Baxter, Randy; Brown, Larry R.; Castillo, Gonzalo; Conrad, Louise; Culberson, Steven D.; Dekar, Matthew P.; Dekar, Melissa; Feyrer, Frederick; Hunt, Thaddeus; Jones, Kristopher; Kirsch, Joseph; Mueller-Solger, Anke; Nobriga, Matthew; Slater, Steven B.; Sommer, Ted; Souza, Kelly; Erickson, Gregg; Fong, Stephanie; Gehrts, Karen; Grimaldo, Lenny; Herbold, Bruce

2015-01-01

The main purpose of this report is to provide an up-to-date assessment and conceptual model of factors affecting Delta Smelt (Hypomesus transpacificus) throughout its primarily annual life cycle and to demonstrate how this conceptual model can be used for scientific and management purposes. The Delta Smelt is a small estuarine fish that only occurs in the San Francisco Estuary. Once abundant, it is now rare and has been protected under the federal and California Endangered Species Acts since 1993. The Delta Smelt listing was related to a step decline in the early 1980s; however, population abundance decreased even further with the onset of the “pelagic organism decline” (POD) around 2002. A substantial, albeit short-lived, increase in abundance of all life stages in 2011 showed that the Delta Smelt population can still rebound when conditions are favorable for spawning, growth, and survival. In this report, we update previous conceptual models for Delta Smelt to reflect new data and information since the release of the last synthesis report about the POD by the Interagency Ecological Program for the San Francisco Estuary (IEP) in 2010. Specific objectives include:

Conceptual Framework To Extend Life Cycle Assessment Using Near-Field Human Exposure Modeling and High-Throughput Tools for Chemicals.

Science.gov (United States)

Csiszar, Susan A; Meyer, David E; Dionisio, Kathie L; Egeghy, Peter; Isaacs, Kristin K; Price, Paul S; Scanlon, Kelly A; Tan, Yu-Mei; Thomas, Kent; Vallero, Daniel; Bare, Jane C

2016-11-01

Life Cycle Assessment (LCA) is a decision-making tool that accounts for multiple impacts across the life cycle of a product or service. This paper presents a conceptual framework to integrate human health impact assessment with risk screening approaches to extend LCA to include near-field chemical sources (e.g., those originating from consumer products and building materials) that have traditionally been excluded from LCA. A new generation of rapid human exposure modeling and high-throughput toxicity testing is transforming chemical risk prioritization and provides an opportunity for integration of screening-level risk assessment (RA) with LCA. The combined LCA and RA approach considers environmental impacts of products alongside risks to human health, which is consistent with regulatory frameworks addressing RA within a sustainability mindset. A case study is presented to juxtapose LCA and risk screening approaches for a chemical used in a consumer product. The case study demonstrates how these new risk screening tools can be used to inform toxicity impact estimates in LCA and highlights needs for future research. The framework provides a basis for developing tools and methods to support decision making on the use of chemicals in products.

Teacher Emotion Research: Introducing a Conceptual Model to Guide Future Research

Science.gov (United States)

Fried, Leanne; Mansfield, Caroline; Dobozy, Eva

2015-01-01

This article reports on the development of a conceptual model of teacher emotion through a review of teacher emotion research published between 2003 and 2013. By examining 82 publications regarding teacher emotion, the main aim of the review was to identify how teacher emotion was conceptualised in the literature and develop a conceptual model to…

Development and Validation of the Conceptual Assessment of Natural Selection (CANS)

Science.gov (United States)

Kalinowski, Steven T.; Leonard, Mary J.; Taper, Mark L.

2016-01-01

We developed and validated the Conceptual Assessment of Natural Selection (CANS), a multiple-choice test designed to assess how well college students understand the central principles of natural selection. The expert panel that reviewed the CANS concluded its questions were relevant to natural selection and generally did a good job sampling the…

Conceptual Modeling for Adaptive Environmental Assessment and Management in the Barycz Valley, Lower Silesia, Poland

Directory of Open Access Journals (Sweden)

Jakub Kronenberg

2005-08-01

Full Text Available The complexity of interactions in socio-ecological systems makes it very difficult to plan and implement policies successfully. Traditional environmental management and assessment techniques produce unsatisfactory results because they often ignore facets of system structure that underlie complexity: delays, feedbacks, and non-linearities. Assuming that causes are linked in a linear chain, they concentrate on technological developments (“hard path” as the only solutions to environmental problems. Adaptive Management is recognized as a promising alternative approach directly addressing links between social and ecological systems and involving stakeholders in the analysis and decision process. This “soft path” requires special tools to facilitate collaboration between “experts” and stakeholders in analyzing complex situations and prioritizing policies and actions. We have applied conceptual modeling to increase communication, understanding and commitment in the project of seven NGOs “Sustainable Regional Development in the Odra Catchment”. The main goal was to help our NGO partners to facilitate their efforts related to developing sustainable policies and practices to respond to large-scale challenges (EU accession, global changes in climate and economy to their natural, economic and socio-cultural heritages. Among the variety of sustainability issues explored by these NGOs, two (extensive agricultural practices and “green” local products were examined by using Adaptive Management (AM as a framework that would link analysis, discussion, research, actions and monitoring. Within the AM framework the project coordinators used tools of systems analysis (Mental Model Mapping to facilitate discussions in which NGO professionals and local stakeholders could graphically diagram and study their understanding of what factors interacted and

A unifying conceptual model of entrepreneurial management

DEFF Research Database (Denmark)

Senderovitz, Martin

This article offers a systematic analysis and synthesis of the area of entrepreneurial management. Through a presentation of two main perspectives on entrepreneurial management and a newly developed unifying conceptual entrepreneurial management model, the paper discusses a number of theoretical...

Using Annotated Conceptual Models to Derive Information System Implementations

Directory of Open Access Journals (Sweden)

Anthony Berglas

1994-05-01

Full Text Available Producing production quality information systems from conceptual descriptions is a time consuming process that employs many of the world's programmers. Although most of this programming is fairly routine, the process has not been amenable to simple automation because conceptual models do not provide sufficient parameters to make all the implementation decisions that are required, and numerous special cases arise in practice. Most commercial CASE tools address these problems by essentially implementing a waterfall model in which the development proceeds from analysis through design, layout and coding phases in a partially automated manner, but the analyst/programmer must heavily edit each intermediate stage. This paper demonstrates that by recognising the nature of information systems, it is possible to specify applications completely using a conceptual model that has een annotated with additional parameters that guide automated implementation. More importantly, it will be argued that a manageable number of annotations are sufficient to implement realistic applications, and techniques will be described that enabled the author's commercial CASE tool, the Intelligent Develope to automated implementation without requiring complex theorem proving technology.

Menthor Editor: An Ontology-Driven Conceptual Modeling Platform

NARCIS (Netherlands)

Moreira, João Luiz; Sales, Tiago Prince; Guerson, John; Braga, Bernardo F.B; Brasileiro, Freddy; Sobral, Vinicius

2016-01-01

The lack of well-founded constructs in ontology tools can lead to the construction of non-intended models. In this demonstration we present the Menthor Editor, an ontology-driven conceptual modelling platform which incorporates the theories of the Unified Foundational Ontology (UFO). We illustrate

Modelling in Primary School: Constructing Conceptual Models and Making Sense of Fractions

Science.gov (United States)

Shahbari, Juhaina Awawdeh; Peled, Irit

2017-01-01

This article describes sixth-grade students' engagement in two model-eliciting activities offering students the opportunity to construct mathematical models. The findings show that students utilized their knowledge of fractions including conceptual and procedural knowledge in constructing mathematical models for the given situations. Some students…

Safety Assessment for LILW Near-Surface Disposal Facility Using the IAEA Reference Model and MASCOT Program

International Nuclear Information System (INIS)

Kim, Hyun Joo; Park, Joo Wan; Kim, Chang Lak

2002-01-01

A reference scenario of vault safety case prepared by the IAEA for the near-surface disposal facility of low-and intermediate-level radioactive wastes is assessed with the MASCOT program. The appropriate conceptual models for the MASCOT implementation is developed. An assessment of groundwater pathway through a drinking well as a geosphere-biosphere interface is performed first, then biosphere pathway is analysed to estimate the radiological consequences of the disposed radionuclides based on compartment modeling approach. The validity of conceptual modeling for the reference scenario is investigated where possible comparing to the results generated by the other assessment. The result of this study shows that the typical conceptual model for groundwater pathway represented by the compartment model can be satisfactorily used for safety assessment of the entire disposal system in a consistent way. It is also shown that safety assessment of a disposal facility considering complex and various pathways would be possible by the MASCOT program

Conceptual Commitments of the LIDA Model of Cognition

Science.gov (United States)

Franklin, Stan; Strain, Steve; McCall, Ryan; Baars, Bernard

2013-06-01

Significant debate on fundamental issues remains in the subfields of cognitive science, including perception, memory, attention, action selection, learning, and others. Psychology, neuroscience, and artificial intelligence each contribute alternative and sometimes conflicting perspectives on the supervening problem of artificial general intelligence (AGI). Current efforts toward a broad-based, systems-level model of minds cannot await theoretical convergence in each of the relevant subfields. Such work therefore requires the formulation of tentative hypotheses, based on current knowledge, that serve to connect cognitive functions into a theoretical framework for the study of the mind. We term such hypotheses "conceptual commitments" and describe the hypotheses underlying one such model, the Learning Intelligent Distribution Agent (LIDA) Model. Our intention is to initiate a discussion among AGI researchers about which conceptual commitments are essential, or particularly useful, toward creating AGI agents.

Hydrogeological conceptual model development and numerical modelling using CONNECTFLOW, Forsmark modelling stage 2.3

Energy Technology Data Exchange (ETDEWEB)

Follin, Sven (SF GeoLogic AB, Taeby (Sweden)); Hartley, Lee; Jackson, Peter; Roberts, David (Serco TAP (United Kingdom)); Marsic, Niko (Kemakta Konsult AB, Stockholm (Sweden))

2008-05-15

Three versions of a site descriptive model (SDM) have been completed for the Forsmark area. Version 0 established the state of knowledge prior to the start of the site investigation programme. Version 1.1 was essentially a training exercise and was completed during 2004. Version 1.2 was a preliminary site description and concluded the initial site investigation work (ISI) in June 2005. Three modelling stages are planned for the complete site investigation work (CSI). These are labelled stage 2.1, 2.2 and 2.3, respectively. An important component of each of these stages is to address and continuously try to resolve discipline-specific uncertainties of importance for repository engineering and safety assessment. Stage 2.1 included an updated geological model for Forsmark and aimed to provide a feedback from the modelling working group to the site investigation team to enable completion of the site investigation work. Stage 2.2 described the conceptual understanding and the numerical modelling of the bedrock hydrogeology in the Forsmark area based on data freeze 2.2. The present report describes the modelling based on data freeze 2.3, which is the final data freeze in Forsmark. In comparison, data freeze 2.3 is considerably smaller than data freeze 2.2. Therefore, stage 2.3 deals primarily with model confirmation and uncertainty analysis, e.g. verification of important hypotheses made in stage 2.2 and the role of parameter uncertainty in the numerical modelling. On the whole, the work reported here constitutes an addendum to the work reported in stage 2.2. Two changes were made to the CONNECTFLOW code in stage 2.3. These serve to: 1) improve the representation of the hydraulic properties of the regolith, and 2) improve the conditioning of transmissivity of the deformation zones against single-hole hydraulic tests. The changes to the modelling of the regolith were made to improve the consistency with models made with the MIKE SHE code, which involved the introduction

Lung Cancer Screening Participation: Developing a Conceptual Model to Guide Research.

Science.gov (United States)

Carter-Harris, Lisa; Davis, Lorie L; Rawl, Susan M

2016-11-01

To describe the development of a conceptual model to guide research focused on lung cancer screening participation from the perspective of the individual in the decision-making process. Based on a comprehensive review of empirical and theoretical literature, a conceptual model was developed linking key psychological variables (stigma, medical mistrust, fatalism, worry, and fear) to the health belief model and precaution adoption process model. Proposed model concepts have been examined in prior research of either lung or other cancer screening behavior. To date, a few studies have explored a limited number of variables that influence screening behavior in lung cancer specifically. Therefore, relationships among concepts in the model have been proposed and future research directions presented. This proposed model is an initial step to support theoretically based research. As lung cancer screening becomes more widely implemented, it is critical to theoretically guide research to understand variables that may be associated with lung cancer screening participation. Findings from future research guided by the proposed conceptual model can be used to refine the model and inform tailored intervention development.

Nirex 97 an assessment of the post-closure performance of a deep waste repository at Sellafield. Volume 1: hydrogeological model development - conceptual basis and data

International Nuclear Information System (INIS)

Degnan, P.; Littleboy, A.

1997-01-01

repository zone beneath Longlands Farm. In style, scope and presentation, Nirex 97 is primarily aimed at the scientific community, other radioactive waste disposal agencies and regulators. The report is published as part of Nirex's commitment to open publication of its scientific findings. The main value of the report currently is as a demonstration of the generic capability which has been developed to assess the radiological safety performance of candidate repository sites. The safety assessment reported as Nirex 97 was carried out between April 1996 and August 1997. It updates a preliminary assessment of the groundwater pathway for a repository at Sellafield, 'Nirex 95' published in July 1995. Nirex 97 takes account of further data obtained from the Nirex waste inventory, design, site characterisation and research programmes. In addition, Nirex 97 extends the Nirex 95 evaluation to include consideration of the potential radiological and flammability hazards in the biosphere arising from the effects of gas generation within the repository and the extent of pressurisation within the repository vaults. The assessment also takes account of the latest guidance from the Environment Agencies on requirements for authorisation of disposal facilities on land. Volume 1: Hydrogeological Conceptual Model Development - Conceptual Basis and Data, presents the conceptual model of the hydrogeology of the Sellafield area which underpins the post-closure performance assessment. The volume summarises the conceptual model development process and outlines the extensive site characterisation data for Sellafield which have been used in Nirex 97

Introductory Biology Students’ Conceptual Models and Explanations of the Origin of Variation

Science.gov (United States)

Shaw, Neil; Momsen, Jennifer; Reinagel, Adam; Le, Paul; Taqieddin, Ranya; Long, Tammy

2014-01-01

Mutation is the key molecular mechanism generating phenotypic variation, which is the basis for evolution. In an introductory biology course, we used a model-based pedagogy that enabled students to integrate their understanding of genetics and evolution within multiple case studies. We used student-generated conceptual models to assess understanding of the origin of variation. By midterm, only a small percentage of students articulated complete and accurate representations of the origin of variation in their models. Targeted feedback was offered through activities requiring students to critically evaluate peers’ models. At semester's end, a substantial proportion of students significantly improved their representation of how variation arises (though one-third still did not include mutation in their models). Students’ written explanations of the origin of variation were mostly consistent with their models, although less effective than models in conveying mechanistic reasoning. This study contributes evidence that articulating the genetic origin of variation is particularly challenging for learners and may require multiple cycles of instruction, assessment, and feedback. To support meaningful learning of the origin of variation, we advocate instruction that explicitly integrates multiple scales of biological organization, assessment that promotes and reveals mechanistic and causal reasoning, and practice with explanatory models with formative feedback. PMID:25185235

Conceptual Model of Artifacts for Design Science Research

DEFF Research Database (Denmark)

Bækgaard, Lars

2015-01-01

We present a conceptual model of design science research artifacts. The model views an artifact at three levels. At the artifact level a selected artifact is viewed as a combination of material and immaterial aspects and a set of representations hereof. At the design level the selected artifact...

Navigating Tensions Between Conceptual and Metaconceptual Goals in the Use of Models

Science.gov (United States)

Delgado, Cesar

2015-04-01

Science education involves learning about phenomena at three levels: concrete (facts and generalizations), conceptual (concepts and theories), and metaconceptual (epistemology) (Snir et al. in J Sci Educ Technol 2(2):373-388, 1993). Models are key components in science, can help build conceptual understanding, and may also build metaconceptual understanding. Technology can transform teaching and learning by turning models into interactive simulations that learners can investigate. This paper identifies four characteristics of models and simulations that support conceptual learning but misconstrue models and science at a metaconceptual level. Ahistorical models combine the characteristics of several historical models; they conveniently compile ideas but misrepresent the history of science (Gilbert in Int J Sci Math Educ 2(2):115-130, 2004). Teleological models explain behavior in terms of a final cause; they can lead to useful heuristics but imply purpose in processes driven by chance and probability (Talanquer in Int J Sci Educ 29(7):853-870, 2007). Epistemological overreach occurs when models or simulations imply greater certainty and knowledge about phenomena than warranted; conceptualizing nature as being well known (e.g., having a mathematical structure) poses the danger of conflating model and reality or data and theory. Finally, models are inevitably ontologically impoverished. Real-world deviations and many variables are left out of models, as models' role is to simplify. Models and simulations also lose much of the sensory data present in phenomena. Teachers, designers, and professional development designers and facilitators must thus navigate the tension between conceptual and metaconceptual learning when using models and simulations. For each characteristic, examples are provided, along with recommendations for instruction and design. Prompts for explicit reflective activities around models are provided for each characteristic

A Conceptual Framework of Business Model Emerging Resilience

OpenAIRE

Goumagias, Nik; Fernandes, Kiran; Cabras, Ignazio; Li, Feng; Shao, Jianhao; Devlin, Sam; Hodge, Victoria Jane; Cowling, Peter Ivan; Kudenko, Daniel

2016-01-01

In this paper we introduce an environmentally driven conceptual framework of Business Model change. Business models acquired substantial momentum in academic literature during the past decade. Several studies focused on what exactly constitutes a Business Model (role model, recipe, architecture etc.) triggering a theoretical debate about the Business Model’s components and their corresponding dynamics and relationships. In this paper, we argue that for Business Models as cognitive structures,...

Logistics and Transport - a conceptual model

DEFF Research Database (Denmark)

Jespersen, Per Homann; Drewes, Lise

2004-01-01

This paper describes how the freight transport sector is influenced by logistical principles of production and distribution. It introduces new ways of understanding freight transport as an integrated part of the changing trends of mobility. By introducing a conceptual model for understanding...... the interaction between logistics and transport, it points at ways to over-come inherent methodological difficulties when studying this relation...

Conceptualizing a model: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force-2.

Science.gov (United States)

Roberts, Mark; Russell, Louise B; Paltiel, A David; Chambers, Michael; McEwan, Phil; Krahn, Murray

2012-01-01

The appropriate development of a model begins with understanding the problem that is being represented. The aim of this article is to provide a series of consensus-based best practices regarding the process of model conceptualization. For the purpose of this series of papers, the authors consider the development of models whose purpose is to inform medical decisions and health-related resource allocation questions. They specifically divide the conceptualization process into two distinct components: the conceptualization of the problem, which converts knowledge of the health care process or decision into a representation of the problem, followed by the conceptualization of the model itself, which matches the attributes and characteristics of a particular modeling type to the needs of the problem being represented. Recommendations are made regarding the structure of the modeling team, agreement on the statement of the problem, the structure, perspective and target population of the model, and the interventions and outcomes represented. Best practices relating to the specific characteristics of model structure, and which characteristics of the problem might be most easily represented in a specific modeling method, are presented. Each section contains a number of recommendations that were iterated among the authors, as well as the wider modeling taskforce, jointly set up by the International Society for Pharmacoeconomics and Outcomes Research and the Society for Medical Decision Making.

Using Item Response Theory to Conduct a Distracter Analysis on Conceptual Inventory of Natural Selection

Science.gov (United States)

Battisti, Bryce Thomas; Hanegan, Nikki; Sudweeks, Richard; Cates, Rex

2010-01-01

Concept inventories are often used to assess current student understanding although conceptual change models are problematic. Due to controversies with conceptual change models and the realities of student assessment, it is important that concept inventories are evaluated using a variety of theoretical models to improve quality. This study used a…

[Impact of small-area context on health: proposing a conceptual model].

Science.gov (United States)

Voigtländer, S; Mielck, A; Razum, O

2012-11-01

Recent empirical studies stress the impact of features related to the small-area context on individual health. However, so far there exists no standard explanatory model that integrates the different kinds of such features and that conceptualises their relation to individual characteristics of social inequality. A review of theoretical publications on the relationship between social position and health as well as existing conceptual models for the impact of features related to the small-area context on health was undertaken. In the present article we propose a conceptual model for the health impact of the small-area context. This model conceptualises the location of residence as one dimension of social inequality that affects health through the resources as well as stressors which are inherent in the small-area context. The proposed conceptual model offers an orientation for future empirical studies and can serve as a basis for further discussions concerning the health relevance of the small-area context. © Georg Thieme Verlag KG Stuttgart · New York.

An Empirical Review of the Connection Between Model Viewer Characteristics and the Comprehension of Conceptual Process Models

NARCIS (Netherlands)

Mendling, Jan; Recker, Jan; Reijers, Hajo A.; Leopold, Henrik

2018-01-01

Understanding conceptual models of business domains is a key skill for practitioners tasked with systems analysis and design. Research in this field predominantly uses experiments with specific user proxy cohorts to examine factors that explain how well different types of conceptual models can be

Constraining performance assessment models with tracer test results: a comparison between two conceptual models

Science.gov (United States)

McKenna, Sean A.; Selroos, Jan-Olof

Tracer tests are conducted to ascertain solute transport parameters of a single rock feature over a 5-m transport pathway. Two different conceptualizations of double-porosity solute transport provide estimates of the tracer breakthrough curves. One of the conceptualizations (single-rate) employs a single effective diffusion coefficient in a matrix with infinite penetration depth. However, the tracer retention between different flow paths can vary as the ratio of flow-wetted surface to flow rate differs between the path lines. The other conceptualization (multirate) employs a continuous distribution of multiple diffusion rate coefficients in a matrix with variable, yet finite, capacity. Application of these two models with the parameters estimated on the tracer test breakthrough curves produces transport results that differ by orders of magnitude in peak concentration and time to peak concentration at the performance assessment (PA) time and length scales (100,000 years and 1,000 m). These differences are examined by calculating the time limits for the diffusive capacity to act as an infinite medium. These limits are compared across both conceptual models and also against characteristic times for diffusion at both the tracer test and PA scales. Additionally, the differences between the models are examined by re-estimating parameters for the multirate model from the traditional double-porosity model results at the PA scale. Results indicate that for each model the amount of the diffusive capacity that acts as an infinite medium over the specified time scale explains the differences between the model results and that tracer tests alone cannot provide reliable estimates of transport parameters for the PA scale. Results of Monte Carlo runs of the transport models with varying travel times and path lengths show consistent results between models and suggest that the variation in flow-wetted surface to flow rate along path lines is insignificant relative to variability in

Motivation to Improve Work through Learning: A Conceptual Model

Directory of Open Access Journals (Sweden)

Kueh Hua Ng

2014-12-01

Full Text Available This study aims to enhance our current understanding of the transfer of training by proposing a conceptual model that supports the mediating role of motivation to improve work through learning about the relationship between social support and the transfer of training. The examination of motivation to improve work through motivation to improve work through a learning construct offers a holistic view pertaining to a learner's profile in a workplace setting, which emphasizes learning for the improvement of work performance. The proposed conceptual model is expected to benefit human resource development theory building, as well as field practitioners by emphasizing the motivational aspects crucial for successful transfer of training.

A Conceptual Culture Model for Design Science Research

Directory of Open Access Journals (Sweden)

Thomas Richter

2016-03-01

Full Text Available The aim of design science research (DSR in information systems is the user-centred creation of IT-artifacts with regard to specific social environments. For culture research in the field, which is necessary for a proper localization of IT-artifacts, models and research approaches from social sciences usually are adopted. Descriptive dimension-based culture models most commonly are applied for this purpose, which assume culture being a national phenomenon and tend to reduce it to basic values. Such models are useful for investigations in behavioural culture research because it aims to isolate, describe and explain culture-specific attitudes and characteristics within a selected society. In contrast, with the necessity to deduce concrete decisions for artifact-design, research results from DSR need to go beyond this aim. As hypothesis, this contribution generally questions the applicability of such generic culture dimensions’ models for DSR and focuses on their theoretical foundation, which goes back to Hofstede’s conceptual Onion Model of Culture. The herein applied literature-based analysis confirms the hypothesis. Consequently, an alternative conceptual culture model is being introduced and discussed as theoretical foundation for culture research in DSR.

Sierra toolkit computational mesh conceptual model

International Nuclear Information System (INIS)

Baur, David G.; Edwards, Harold Carter; Cochran, William K.; Williams, Alan B.; Sjaardema, Gregory D.

2010-01-01

The Sierra Toolkit computational mesh is a software library intended to support massively parallel multi-physics computations on dynamically changing unstructured meshes. This domain of intended use is inherently complex due to distributed memory parallelism, parallel scalability, heterogeneity of physics, heterogeneous discretization of an unstructured mesh, and runtime adaptation of the mesh. Management of this inherent complexity begins with a conceptual analysis and modeling of this domain of intended use; i.e., development of a domain model. The Sierra Toolkit computational mesh software library is designed and implemented based upon this domain model. Software developers using, maintaining, or extending the Sierra Toolkit computational mesh library must be familiar with the concepts/domain model presented in this report.

An Integrative Conceptual Framework for Assessing and Treating Suicidal Behavior in Adolescents.

Science.gov (United States)

Rudd, M. David; Joiner, Thomas E., Jr.

1998-01-01

An integrative conceptual framework is provided for ongoing assessment and day-to-day treatment of suicidal adolescents. Goals are to provide a summary of therapeutic and assessment tasks consistent with existing standards of care and supported by empirical findings and to emphasize the roles, tasks, demands, and limitations of psychotherapy with…

Conceptualizing a model: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force--2.

Science.gov (United States)

Roberts, Mark; Russell, Louise B; Paltiel, A David; Chambers, Michael; McEwan, Phil; Krahn, Murray

2012-01-01

The appropriate development of a model begins with understanding the problem that is being represented. The aim of this article was to provide a series of consensus-based best practices regarding the process of model conceptualization. For the purpose of this series of articles, we consider the development of models whose purpose is to inform medical decisions and health-related resource allocation questions. We specifically divide the conceptualization process into two distinct components: the conceptualization of the problem, which converts knowledge of the health care process or decision into a representation of the problem, followed by the conceptualization of the model itself, which matches the attributes and characteristics of a particular modeling type with the needs of the problem being represented. Recommendations are made regarding the structure of the modeling team, agreement on the statement of the problem, the structure, perspective, and target population of the model, and the interventions and outcomes represented. Best practices relating to the specific characteristics of model structure and which characteristics of the problem might be most easily represented in a specific modeling method are presented. Each section contains a number of recommendations that were iterated among the authors, as well as among the wider modeling taskforce, jointly set up by the International Society for Pharmacoeconomics and Outcomes Research and the Society for Medical Decision Making. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Postclosure performance assessment of the SCP [Site Characterization Plan] conceptual design for horizontal emplacement: Revision 1

International Nuclear Information System (INIS)

1987-08-01

This report is a preliminary postclosure performance assessment of the repository design specified in the Site Characterization Plan Conceptual Design Report (SCP-CDR) for horizontal emplacement of high-level nuclear waste. At the time that these analyses were done, horizontal emplacement was the preferred orientation for the waste packages but vertical emplacement is now the reference design. This assessment consists of (1) a review of the regulatory requirements and strategy to demonstrate compliance with these requirements, (2) an analysis of the performance of the total repository system, (3) an analysis of the thermomechanical behavior of the repository, (4) an analysis of brine mobility in the repository, (5) an analysis of the waste package performance, (6) an analysis of the performance of seals, and (7) comments on the sensitivity of the various performance measures to uncertainties in the data and models. These are preliminary analyses and, in most cases, involve bounding calculations of the repository behavior. They have several purposes including (1) assessing how well this conceptual design ''measures up'' against requirements, (2) gaining experience in implementing the performance assessment strategy and tools and thereby learning where improvements are needed, (3) helping to identify needed data, and (4) helping to indicate required design modifications. 26 refs., 40 figs., 20 tabs

Conceptual basis for developing of trainig models in complex ...

African Journals Online (AJOL)

This paper presents conceptual basis for developing of training models of interactive assembling system for automatic building of application software systems, ... software generation, such as: program module compatibility, formalization of computer interaction and choosing of formal model for human machine interface.

Elements of a flexible approach for conceptual hydrological modeling : 1. Motivation and theoretical development

NARCIS (Netherlands)

Fenicia, F.; Kavetski, D.; Savenije, H.H.G.

2011-01-01

This paper introduces a flexible framework for conceptual hydrological modeling, with two related objectives: (1) generalize and systematize the currently fragmented field of conceptual models and (2) provide a robust platform for understanding and modeling hydrological systems. In contrast to

Linking Adverse Outcome Pathways to Dynamic Energy Budgets: A Conceptual Model

Energy Technology Data Exchange (ETDEWEB)

Murphy, Cheryl [Michigan State University, East Lansing; Nisbet, Roger [University of California Santa Barbara; Antczak, Philipp [University of Liverpool, UK; Reyero, Natalia [Army Corps of Engineers, Vicksburg; Gergs, Andre [Gaiac; Lika, Dina [University of Crete; Mathews, Teresa J. [ORNL; Muller, Eric [University of California, Santa Barbara; Nacci, Dianne [U.S. Environmental Protection Agency (EPA); Peace, Angela L. [ORNL; Remien, Chris [University of Idaho; Schulz, Irv [Pacific Northwest National Laboratory (PNNL); Watanabe, Karen [Arizona State University

2018-02-01

Ecological risk assessment quantifies the likelihood of undesirable impacts of stressors, primarily at high levels of biological organization. Data used to inform ecological risk assessments come primarily from tests on individual organisms or from suborganismal studies, indicating a disconnect between primary data and protection goals. We know how to relate individual responses to population dynamics using individual-based models, and there are emerging ideas on how to make connections to ecosystem services. However, there is no established methodology to connect effects seen at higher levels of biological organization with suborganismal dynamics, despite progress made in identifying Adverse Outcome Pathways (AOPs) that link molecular initiating events to ecologically relevant key events. This chapter is a product of a working group at the National Center for Mathematical and Biological Synthesis (NIMBioS) that assessed the feasibility of using dynamic energy budget (DEB) models of individual organisms as a “pivot” connecting suborganismal processes to higher level ecological processes. AOP models quantify explicit molecular, cellular or organ-level processes, but do not offer a route to linking sub-organismal damage to adverse effects on individual growth, reproduction, and survival, which can be propagated to the population level through individual-based models. DEB models describe these processes, but use abstract variables with undetermined connections to suborganismal biology. We propose linking DEB and quantitative AOP models by interpreting AOP key events as measures of damage-inducing processes in a DEB model. Here, we present a conceptual model for linking AOPs to DEB models and review existing modeling tools available for both AOP and DEB.

Organizational intellectual capital and the role of the nurse manager: A proposed conceptual model.

Science.gov (United States)

Gilbert, Jason H; Von Ah, Diane; Broome, Marion E

Nurse managers must leverage both the human capital and social capital of the teams they lead in order to produce quality outcomes. Little is known about the relationship between human capital and social capital and how these concepts may work together to produce organizational outcomes through leadership of nurses. The purpose of this article was to explore the concepts of human capital and social capital as they relate to nursing leadership in health care organizations. Specific aims included (a) to synthesize the literature related to human capital and social capital in leadership, (b) to refine the conceptual definitions of human capital and social capital with associated conceptual antecedents and consequences, and (c) to propose a synthesized conceptual model guiding further empirical research of social capital and human capital in nursing leadership. A systematic integrative review of leadership literature using criteria informed by Whittemore and Knafl (2005) was completed. CINAHL Plus with Full Text, Academic Search Premier, Business Source Premier, Health Business FullTEXT, MEDLINE, and PsychINFO databases were searched for the years 1995 to 2016 using terms "human capital," "social capital," and "management." Analysis of conceptual definitions, theoretical and conceptual models, antecedents and consequences, propositions or hypotheses, and empirical support for 37 articles fitting review criteria resulted in the synthesis of the proposed Gilbert Conceptual Model of Organizational Intellectual Capital. The Gilbert Conceptual Model of Organizational Intellectual Capital advances the propositions of human capital theory and social capital theory and is the first model to conceptualize the direct and moderating effects that nurse leaders have on the human capital and social capital of the teams they lead. This model provides a framework for further empirical study and may have implications for practice, organizational policy, and education related to nursing

Conceptual Model of Iodine Behavior in the Subsurface at the Hanford Site

Energy Technology Data Exchange (ETDEWEB)

Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lee, Brady D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Christian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Last, George V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lee, Michelle H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kaplan, Daniel I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-09-01

The fate and transport of 129I in the environment and potential remediation technologies are currently being studied as part of environmental remediation activities at the Hanford Site. A conceptual model describing the nature and extent of subsurface contamination, factors that control plume behavior, and factors relevant to potential remediation processes is needed to support environmental remedy decisions. Because 129I is an uncommon contaminant, relevant remediation experience and scientific literature are limited. Thus, the conceptual model also needs to both describe known contaminant and biogeochemical process information and to identify aspects about which additional information needed to effectively support remedy decisions. this document summarizes the conceptual model of iodine behavior relevant to iodine in the subsurface environment at the Hanford site.

A conceptual model of psychosocial risk and protective factors for excessive gestational weight gain.

Science.gov (United States)

Hill, Briony; Skouteris, Helen; McCabe, Marita; Milgrom, Jeannette; Kent, Bridie; Herring, Sharon J; Hartley-Clark, Linda; Gale, Janette

2013-02-01

nearly half of all women exceed the guideline recommended pregnancy weight gain for their Body Mass Index (BMI) category. Excessive gestational weight gain (GWG) is correlated positively with postpartum weight retention and is a predictor of long-term, higher BMI in mothers and their children. Psychosocial factors are generally not targeted in GWG behaviour change interventions, however, multifactorial, conceptual models that include these factors, may be useful in determining the pathways that contribute to excessive GWG. We propose a conceptual model, underpinned by health behaviour change theory, which outlines the psychosocial determinants of GWG, including the role of motivation and self-efficacy towards healthy behaviours. This model is based on a review of the existing literature in this area. there is increasing evidence to show that psychosocial factors, such as increased depressive symptoms, anxiety, lower self-esteem and body image dissatisfaction, are associated with excessive GWG. What is less known is how these factors might lead to excessive GWG. Our conceptual model proposes a pathway of factors that affect GWG, and may be useful for understanding the mechanisms by which interventions impact on weight management during pregnancy. This involves tracking the relationships among maternal psychosocial factors, including body image concerns, motivation to adopt healthy lifestyle behaviours, confidence in adopting healthy lifestyle behaviours for the purposes of weight management, and actual behaviour changes. health-care providers may improve weight gain outcomes in pregnancy if they assess and address psychosocial factors in pregnancy. Copyright © 2011 Elsevier Ltd. All rights reserved.

Semantic modeling of portfolio assessment in e-learning environment

Directory of Open Access Journals (Sweden)

Lucila Romero

2017-01-01

Full Text Available In learning environment, portfolio is used as a tool to keep track of learner’s progress. Particularly, when it comes to e-learning, continuous assessment allows greater customization and efficiency in learning process and prevents students lost interest in their study. Also, each student has his own characteristics and learning skills that must be taken into account in order to keep learner`s interest. So, personalized monitoring is the key to guarantee the success of technology-based education. In this context, portfolio assessment emerge as the solution because is an easy way to allow teacher organize and personalize assessment according to students characteristic and need. A portfolio assessment can contain various types of assessment like formative assessment, summative assessment, hetero or self-assessment and use different instruments like multiple choice questions, conceptual maps, and essay among others. So, a portfolio assessment represents a compilation of all assessments must be solved by a student in a course, it documents progress and set targets. In previous work, it has been proposed a conceptual framework that consist of an ontology network named AOnet which is a semantic tool conceptualizing different types of assessments. Continuing that work, this paper presents a proposal to implement portfolios assessment in e-learning environments. The proposal consists of a semantic model that describes key components and relations of this domain to set the bases to develop a tool to generate, manage and perform portfolios assessment.

[Self-Determination in Medical Rehabilitation - Development of a Conceptual Model for Further Theoretical Discussion].

Science.gov (United States)

Senin, Tatjana; Meyer, Thorsten

2018-01-22

Aim was to gather theoretical knowledge about self-determination and to develop a conceptual model for medical rehabilitation- which serves as a basis for discussion. We performed a literature research in electronic databases. Various theories and research results were adopted and transferred to the context of medical rehabilitation and into a conceptual model. The conceptual model of self-determination reflects on a continuum which forms of self-determination may be present in situations of medical rehabilitation treatments. The location on the continuum depends theoretically on the manifestation of certain internal and external factors that may influence each other. The model provides a first conceptualization of self-determination focusing on medical rehabilitation which should be further refined and tested empirically. © Georg Thieme Verlag KG Stuttgart · New York.

Technologies for conceptual modelling and intelligent query formulation

CSIR Research Space (South Africa)

Alberts, R

2008-11-01

Full Text Available The aim of the project is to devise and evaluate algorithms, methodologies, techniques and interaction paradigms to build a tool for conceptual modelling and query management of complex data repositories based on a framework with solid formal...

Using a conceptual model to assess the role of flow regulation in the hydromorphological evolution of riparian corridors

Science.gov (United States)

Martínez-Fernández, Vanesa; Gonzalez del Tánago, Marta; García de Jalón, diego

2017-04-01

Riparian corridors result from active vegetation-fluvial interactions, which are highly dependent on flow regime conditions and sediment dynamics. Colonization, establishment and survival of species are constrained by fluvial processes which vary according to topographic and sedimentological complexity of the corridor. In order to manage these dynamic and complex riparian systems there is a need for practical tools based on conceptual models. The objective of this study was to apply the conceptual model of riparian corridors lateral zonation in response to the dominant fluvial processes established by Gurnell et al. (2015) and verify its usefulness as a tool for assessing the effect of flow regulation. Two gravel rivers have been selected for this purpose from the north of Spain, the Porma River regulated by Boñar large dam and the unregulated Curueño River. The historical series of flows and the aerial photographs of 1956 and 2011 on which the river corridor has been delimited have been analyzed and identified the permanent inundated zone (1) and four areas of riparian vegetation dominated respectively by fluvial disturbance with coarse sediment erosion and deposition (zone 2), fluvial disturbance with finer sediment deposition (zone 3), inundation (zone 4) and soil moisture regime (zone 5). Likewise, a two-dimensional hydraulic simulation was performed with avenues of different return periods and calculated the prevailing hydraulic conditions (depths, velocities and drag forces) to characterize each of the vegetation zones mentioned in both rivers. The results show that the most active zone 2 (fluvial disturbance dominated showing coarse sediment erosion and deposition) disappears due to the regulation of flows and vegetation encroachment, while the riparian corridor is dominated by the less active zone where the vegetation is maintained by the humidity of sporadic floods and underground runoff. Moreover, by means of the hydraulic simulation we have found a

Towards a Model and Methodology for Assessing Student Learning Outcomes and Satisfaction

Science.gov (United States)

Duque, Lola C.; Weeks, John R.

2010-01-01

Purpose: The purpose of this paper is threefold: first, to introduce a conceptual model for assessing undergraduate student learning outcomes and satisfaction that involves concepts drawn from the services marketing and assessment literatures; second, to illustrate the utility of the model as implemented in an academic department (geography)…

The International Classification of Functioning, Disability and Health: a unifying model for the conceptual description of physical and rehabilitation medicine.

Science.gov (United States)

Stucki, Gerold; Melvin, John

2007-05-01

There is a need to develop a contemporary and internationally accepted conceptual description of physical and rehabilitation medicine (PRM). The process of evolving such a definition can now rely on the unifying conceptual model and taxonomy of the International Classification of Functioning, Disability and Health (ICF) and an ICF-based conceptual description of rehabilitation understood as a health strategy. The PRM section of the European Union of Medical Specialists (UEMS) has endorsed the application of the ICF as a unifying conceptual model for PRM and supports the process of moving towards an "ICF-based conceptual description and according definitions of PRM". With this goal in mind, the authors have developed a first tentative conceptual description in co-operation with the professional practice committee of the UEMS-PRM-section. A respective brief definition describes PRM as the medical specialty that, based on the assessment of functioning and including the diagnosis and treatment of health conditions, performs, applies and co-ordinates biomedical and engineering and a wide range of other interventions with the goal of optimizing functioning of people experiencing or likely to experience disability. Readers of the Journal of Rehabilitation Medicine are invited to contribute to the process of achieving an internationally accepted ICF-based conceptual description of PRM by submitting commentaries to the Editor of this journal.

Conceptual models of microseismicity induced by fluid injection

Science.gov (United States)

Baro Urbea, J.; Lord-May, C.; Eaton, D. W. S.; Joern, D.

2017-12-01

Variations in the pore pressure due to fluid invasion are accountable for microseismic activity recorded in geothermal systems and during hydraulic fracturing operations. To capture this phenomenon on a conceptual level, invasion percolation models have been suggested to represent the flow network of fluids within a porous media and seismic activity is typically considered to be directly related to the expansion of the percolated area. Although such models reproduce scale-free frequency-magnitude distributions, the associated b-values of the Gutenberg-Richter relation do not align with observed data. Here, we propose an alternative conceptual invasion percolation model that decouples the fluid propagation from the microseismic events. Instead of a uniform pressure, the pressure is modeled to decay along the distance from the injection site. Wet fracture events are simulated with a stochastic spring block model exhibiting stick-slip dynamics as a result of the variations of the pore pressure. We show that the statistics of the stick-slip events are scale-free, but now the b-values depend on the level of heterogeneity in the local static friction coefficients. Thus, this model is able to reproduce the wide spectrum of b-values observed in field catalogs associated with fluid induced microseismicity. Moreover, the spatial distribution of microseismic events is also consistent with observations.

Biosphere conceptual model development in the frame of Baita Bihor repository safety project

International Nuclear Information System (INIS)

Paunescu, N.; Margineanu, R.; Ene, D.

2002-01-01

The topic of this paper is the development of the biosphere model in the frame of the preliminary performance assessment of the Romanian National L and ILW repository, Baita-Bihor. The work presents the actual understanding of the radionuclide pathways through the repository adjacent area and their conceptualization, collection of required data, implementation of model and preliminary calculation results. The model takes into consideration a leaching scenario from the near field and the transport of radionuclides by river water. The critical group is a small community of inhabitants relying on the local resources, which constitutes an agriculture community 'small farm system'. On the basis of the defined specifications (biosphere equations and data), application of model and dose rate estimates were performed by the ABRICOT code. (author)

Coupled Multiple-Response versus Free-Response Conceptual Assessment: An Example from Upper-Division Physics

Science.gov (United States)

Wilcox, Bethany R.; Pollock, Steven J.

2014-01-01

Free-response research-based assessments, like the Colorado Upper-division Electrostatics Diagnostic (CUE), provide rich, fine-grained information about students' reasoning. However, because of the difficulties inherent in scoring these assessments, the majority of the large-scale conceptual assessments in physics are multiple choice. To increase…

An independent verification and validation of the Future Theater Level Model conceptual model

Energy Technology Data Exchange (ETDEWEB)

Hartley, D.S. III; Kruse, K.L.; Martellaro, A.J.; Packard, S.L.; Thomas, B. Jr.; Turley, V.K.

1994-08-01

This report describes the methodology and results of independent verification and validation performed on a combat model in its design stage. The combat model is the Future Theater Level Model (FTLM), under development by The Joint Staff/J-8. J-8 has undertaken its development to provide an analysis tool that addresses the uncertainties of combat more directly than previous models and yields more rapid study results. The methodology adopted for this verification and validation consisted of document analyses. Included were detailed examination of the FTLM design documents (at all stages of development), the FTLM Mission Needs Statement, and selected documentation for other theater level combat models. These documents were compared to assess the FTLM as to its design stage, its purpose as an analytical combat model, and its capabilities as specified in the Mission Needs Statement. The conceptual design passed those tests. The recommendations included specific modifications as well as a recommendation for continued development. The methodology is significant because independent verification and validation have not been previously reported as being performed on a combat model in its design stage. The results are significant because The Joint Staff/J-8 will be using the recommendations from this study in determining whether to proceed with develop of the model.

A Conceptual Model of Agile Software Development in a Safety-Critical Context: A Systematic Literature Review

DEFF Research Database (Denmark)

Tordrup Heeager, Lise; Nielsen, Peter Axel

2018-01-01

challenges of agile software development of safety-critical systems. The conceptual model consists of four problematic practice areas and five relationships, which we find to be even more important than the problematic areas. From this review, we suggest that there are important research gaps that need...... processes or agile processes that are purportedly faster and promise to lead to better products. Objective: To identify the issues and disputes in agile development of safety-critical software and the key qualities as found in the extant research literature. Method: We conducted a systematic literature...... review as an interpretive study following a research design to search, assess, extract, group, and understand the results of the found studies. Results: There are key issues and propositions that we elicit from the literature and combine into a conceptual model for understanding the foundational...

CONCEPTUAL MODEL OF INFORMATION SYSTEM OF THE AGRICULTURAL ENTERPRISES

Directory of Open Access Journals (Sweden)

Uladzimir Buts

2017-02-01

Full Text Available Abstract. Research subject represented by the theoretical and practical issues use of information resources in the agricultural business. Research aim is to formation of a conceptual model of information system of agricultural enterprises according to the requirements of sustainable development. Research methods. The work is prepared on basis of several scientific methods and approaches including monographic, analytical, computational and constructive methods of mathematical and structural logic simulation of information systems. Research results. Based on the assessment of the results of research information systems in agribusiness, as reflected in the theoretical review, the author designed principles of the information system for the agricultural enterprise for sustainable development of agribusiness. Sphere of application of the research results. State and regional authorities of economic regulation. Agricultural enterprises and farmers.

A Conceptual Model of eLearning Adoption

Directory of Open Access Journals (Sweden)

Muneer Abbad

2011-05-01

Full Text Available Internet-based learning systems are being used in many universities and firms but their adoption requires a solid understanding of the user acceptance processes. The technology acceptance model (TAM has been used to test the acceptance of various technologies and software within an e-learning context. This research aims to discuss the main factors of a successful e-learning adoption by students. A conceptual research framework of e-learning adoption is proposed based on the TAM model.

Interpersonal Skills in MBA Admissions: How Are They Conceptualized and Assessed?

Science.gov (United States)

Beenen, Gerard; Pichler, Shaun; Davoudpour, Shahin

2018-01-01

Employers and students concur that soft skills or interpersonal skills are critical to managerial success, yet we know little about how MBA program admissions professionals conceptualize and assess these skills in the context of global management education. Such practices have key implications for interpersonal skills curriculum and training in…

Understanding and overcoming negative impacts of tourism in city destinations: conceptual model and strategic framework

Directory of Open Access Journals (Sweden)

Albert Postma

2017-09-01

Full Text Available Purpose – The purpose of this paper is to clarify the mechanisms of conflict between residents and tourists and to propose a conceptual model to assess the impact of such conflicts on city tourism and to suggest a framework to develop strategies to deal with such conflicts and mitigate negative impacts. Design/methodology/approach – Based on desk research a conceptual model was developed which describes the drivers of conflicts between residents and visitors. Building blocks of the model are visitors and their attributes, residents and their attributes, conflict mechanisms and critical encounters between residents and visitors, and indicators of the quality and quantity of tourist facilities. Subsequently the model was used to analyse the situation in Hamburg. For this analysis concentration values were calculated based on supply data of hotels and AirBnB, app-data, and expert consultations. Findings – The study shows that in Hamburg there are two key mechanisms that stimulate conflicts: (1 the number of tourists in relation to the number of residents and its distribution in time and space; (2 the behaviour of visitors measured in the norms that they pose onto themselves and others (indecent behaviour of tourists. Research limitations/implications – The model that was developed is a conceptual model, not a model with which hypotheses can be tested statistically. Refinement of the model needs further study. Practical implications – Based on the outcomes of the study concrete strategies were proposed with which Hamburg could manage and control the balance of tourism. Originality/value – City tourism has been growing in the last decades, in some cases dramatically. As a consequence, conflicts between tourists, tourism suppliers and inhabitants can occur. The rise of the so-called sharing economy has recently added an additional facet to the discussion. The ability to assess and deal with such conflicts is of importance for the way city

Business Model Innovation: An Integrative Conceptual Framework

Directory of Open Access Journals (Sweden)

Bernd Wirtz

2017-01-01

Full Text Available Purpose: The point of departure of this exploratory study is the gap between the increasing importance of business model innovation (BMI in science and management and the limited conceptual assistance available. Therefore, the study identi es and explores scattered BMI insights and deduces them into an integrative framework to enhance our understanding about this phenomenon and to present a helpful guidance for researchers and practitioners. Design/Methodology/Approach: The study identi es BMI insights through a literature-based investigation and consolidates them into an integrative BMI framework that presents the key elements and dimensions of BMI as well as their presumed relationships. Findings: The study enhances our understanding about the key elements and dimensions of BMI, presents further conceptual insights into the BMI phenomenon, supplies implications for science and management, and may serve as a helpful guidance for future research. Practical Implications: The presented framework provides managers with a tool to identify critical BMI issues and can serve as a conceptual BMI guideline. Research limitations: Given the vast amount of academic journals, it is unlikely that every applicable scienti c publication is included in the analysis. The illustrative examples are descriptive in nature, and thus do not provide empirical validity. Several implications for future research are provided. Originality/Value: The study’s main contribution lies in the unifying approach of the dispersed BMI knowledge. Since our understanding of BMI is still limited, this study should provide the necessary insights and conceptual assistance to further develop the concept and guide its practical application.

River City High School Guidance Services: A Conceptual Model.

Science.gov (United States)

American Coll. Testing Program, Iowa City, IA.

This model describes how the guidance staff at a hypothetical high school communicated the effectiveness of the guidance program to students, parents, teachers, and administrators. A description of the high school is presented, and guidance services and personnel are described. A conceptual model responding to student needs is outlined along with…

A conceptual and calculational model for gas formation from impure calcined plutonium oxides

International Nuclear Information System (INIS)

Lyman, John L.; Eller, P. Gary

2000-01-01

Safe transport and storage of pure and impure plutonium oxides requires an understanding of processes that may generate or consume gases in a confined storage vessel. We have formulated conceptual and calculational models for gas formation from calcined materials. The conceptual model for impure calcined plutonium oxides is based on the data collected to date

Conceptual assessment tool for advanced undergraduate electrodynamics

Science.gov (United States)

Baily, Charles; Ryan, Qing X.; Astolfi, Cecilia; Pollock, Steven J.

2017-12-01

As part of ongoing investigations into student learning in advanced undergraduate courses, we have developed a conceptual assessment tool for upper-division electrodynamics (E&M II): the Colorado UppeR-division ElectrodyNamics Test (CURrENT). This is a free response, postinstruction diagnostic with 6 multipart questions, an optional 3-question preinstruction test, and accompanying grading rubrics. The instrument's development was guided by faculty-consensus learning goals and research into common student difficulties. It can be used to gauge the effectiveness of transformed pedagogy, and to gain insights into student thinking in the covered topic areas. We present baseline data representing 500 students across 9 institutions, along with validity, reliability, and discrimination measures of the instrument and scoring rubric.

PRA and Conceptual Design

Science.gov (United States)

DeMott, Diana; Fuqua, Bryan; Wilson, Paul

2013-01-01

Once a project obtains approval, decision makers have to consider a variety of alternative paths for completing the project and meeting the project objectives. How decisions are made involves a variety of elements including: cost, experience, current technology, ideologies, politics, future needs and desires, capabilities, manpower, timing, available information, and for many ventures management needs to assess the elements of risk versus reward. The use of high level Probabilistic Risk Assessment (PRA) Models during conceptual design phases provides management with additional information during the decision making process regarding the risk potential for proposed operations and design prototypes. The methodology can be used as a tool to: 1) allow trade studies to compare alternatives based on risk, 2) determine which elements (equipment, process or operational parameters) drives the risk, and 3) provide information to mitigate or eliminate risks early in the conceptual design to lower costs. Creating system models using conceptual design proposals and generic key systems based on what is known today can provide an understanding of the magnitudes of proposed systems and operational risks and facilitates trade study comparisons early in the decision making process. Identifying the "best" way to achieve the desired results is difficult, and generally occurs based on limited information. PRA provides a tool for decision makers to explore how some decisions will affect risk before the project is committed to that path, which can ultimately save time and money.

Patient-Clinician Communication About Pain: A Conceptual Model and Narrative Review.

Science.gov (United States)

Henry, Stephen G; Matthias, Marianne S

2018-02-01

Productive patient-clinician communication is an important component of effective pain management, but we know little about how patients and clinicians actually talk about pain in clinical settings and how it might be improved to produce better patient outcomes. The objective of this review was to create a conceptual model of patient-clinician communication about noncancer pain, review and synthesize empirical research in this area, and identify priorities for future research. A conceptual model was developed that drew on existing pain and health communication research. CINAHL, EMBASE, and PubMed were searched to find studies reporting empirical data on patient-clinician communication about noncancer pain; results were supplemented with manual searches. Studies were categorized and analyzed to identify crosscutting themes and inform model development. The conceptual model comprised the following components: contextual factors, clinical interaction, attitudes and beliefs, and outcomes. Thirty-nine studies met inclusion criteria and were analyzed based on model components. Studies varied widely in quality, methodology, and sample size. Two provisional conclusions were identified: contrary to what is often reported in the literature, discussions about analgesics are most frequently characterized by patient-clinician agreement, and self-presentation during patient-clinician interactions plays an important role in communication about pain and opioids. Published studies on patient-clinician communication about noncancer pain are few and diverse. The conceptual model presented here can help to identify knowledge gaps and guide future research on communication about pain. Investigating the links between communication and pain-related outcomes is an important priority for future research. © 2018 American Academy of Pain Medicine. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Validity of Basic Electronic 1 Module Integrated Character Value Based on Conceptual Change Teaching Model to Increase Students Physics Competency in STKIP PGRI West Sumatera

Science.gov (United States)

Hidayati, A.; Rahmi, A.; Yohandri; Ratnawulan

2018-04-01

The importance of teaching materials in accordance with the characteristics of students became the main reason for the development of basic electronics I module integrated character values based on conceptual change teaching model. The module development in this research follows the development procedure of Plomp which includes preliminary research, prototyping phase and assessment phase. In the first year of this research, the module is validated. Content validity is seen from the conformity of the module with the development theory in accordance with the demands of learning model characteristics. The validity of the construct is seen from the linkage and consistency of each module component developed with the characteristic of the integrated learning model of character values obtained through validator assessment. The average validation value assessed by the validator belongs to a very valid category. Based on the validator assessment then revised the basic electronics I module integrated character values based on conceptual change teaching model.

NEW MODEL OF QUALITY ASSESSMENT IN PUBLIC ADMINISTRATION - UPGRADING THE COMMON ASSESSMENT FRAMEWORK (CAF

Directory of Open Access Journals (Sweden)

Mirna Macur

2017-01-01

Full Text Available In our study, we developed new model of quality assessment in public administration. The Common Assessment Framework (CAF is frequently used in continental Europe for this purpose. Its use has many benefits, however we believe its assessment logic is not adequate for public administration. Upgraded version of CAF is conceptually different: instead of analytical and linear CAF we get the instrument that measures organisation as a network of complex processes. Original and upgraded assessment approaches are presented in the paper and compared in the case of self-assessment of selected public administration organisation. The two approaches produced different, sometimes contradictory results. The upgraded model proved to be logically more consistent and it produced higher interpretation capacity.

Robust Bayesian Experimental Design for Conceptual Model Discrimination

Science.gov (United States)

Pham, H. V.; Tsai, F. T. C.

2015-12-01

A robust Bayesian optimal experimental design under uncertainty is presented to provide firm information for model discrimination, given the least number of pumping wells and observation wells. Firm information is the maximum information of a system can be guaranteed from an experimental design. The design is based on the Box-Hill expected entropy decrease (EED) before and after the experiment design and the Bayesian model averaging (BMA) framework. A max-min programming is introduced to choose the robust design that maximizes the minimal Box-Hill EED subject to that the highest expected posterior model probability satisfies a desired probability threshold. The EED is calculated by the Gauss-Hermite quadrature. The BMA method is used to predict future observations and to quantify future observation uncertainty arising from conceptual and parametric uncertainties in calculating EED. Monte Carlo approach is adopted to quantify the uncertainty in the posterior model probabilities. The optimal experimental design is tested by a synthetic 5-layer anisotropic confined aquifer. Nine conceptual groundwater models are constructed due to uncertain geological architecture and boundary condition. High-performance computing is used to enumerate all possible design solutions in order to identify the most plausible groundwater model. Results highlight the impacts of scedasticity in future observation data as well as uncertainty sources on potential pumping and observation locations.

Regionalising Parameters of a Conceptual Rainfall-Runoff Model for ...

African Journals Online (AJOL)

IHACRES, a lumped conceptual rainfall-runoff model, was calibrated to six catchments ranging in size from 49km2 to 600 km2 within the upper Tana River basin to obtain a set of model parameters that characterise the hydrological behaviour within the region. Physical catchment attributes indexing topography, soil and ...

A beginner's guide to writing the nursing conceptual model-based theoretical rationale.

Science.gov (United States)

Gigliotti, Eileen; Manister, Nancy N

2012-10-01

Writing the theoretical rationale for a study can be a daunting prospect for novice researchers. Nursing's conceptual models provide excellent frameworks for placement of study variables, but moving from the very abstract concepts of the nursing model to the less abstract concepts of the study variables is difficult. Similar to the five-paragraph essay used by writing teachers to assist beginning writers to construct a logical thesis, the authors of this column present guidelines that beginners can follow to construct their theoretical rationale. This guide can be used with any nursing conceptual model but Neuman's model was chosen here as the exemplar.

Advertisement Effectiveness for Print Media: A Conceptual Model

OpenAIRE

Prateek Maheshwari; Nitin Seth; Anoop Kumar Gupta

2015-01-01

The objective of present research paper is to highlight the importance of measuring advertisement effectiveness in print media and to develop a conceptual model for advertisement effectiveness. The developed model is based on dimensions on which advertisement effectiveness depends and on the dimensions which are used to measure the effectiveness. An in-depth and extensive literature review is carried out to understand the concept of advertisement effectiveness and its var...

[Development of a Conceptual Framework for the Assessment of Chronic Care in the Spanish National Health System].

Science.gov (United States)

Espallargues, Mireia; Serra-Sutton, Vicky; Solans-Domènech, Maite; Torrente, Elena; Moharra, Montse; Benítez, Dolors; Robles, Noemí; Domíngo, Laia; Escarrabill Sanglas, Joan

2016-07-07

The aim was to develop a conceptual framework for the assessment of new healthcare initiatives on chronic diseases within the Spanish National Health System. A comprehensive literature review between 2002 and 2013, including systematic reviews, meta-analysis, and reports with evaluation frameworks and/or assessment of initiatives was carried out; integrated care initiatives established in Catalonia were studied and described; and semistructured interviews with key stakeholders were performed. The scope and conceptual framework were defined by using the brainstorming approach.Of 910 abstracts identified, a total of 116 studies were included. They referred to several conceptual frameworks and/or assessment indicators at a national and international level. An overall of 24 established chronic care initiatives were identified (9 integrated care initiatives); 10 in-depth interviews were carried out. The proposed conceptual framework envisages: 1)the target population according to complexity levels; 2)an evaluation approach of the structure, processes, and outcomes considering the health status achieved, the recovery process and the maintenance of health; and 3)the dimensions or attributes to be assessed. The proposed conceptual framework will be helpful has been useful to develop indicators and implement them with a community-based and result-oriented approach and a territorial or population-based perspective within the Spanish Health System. This will be essential to know which are the most effective strategies, what are the key elements that determine greater success and what are the groups of patients who can most benefit.

Student perception and conceptual development as represented by student mental models of atomic structure

Science.gov (United States)

Park, Eun Jung

The nature of matter based upon atomic theory is a principal concept in science; hence, how to teach and how to learn about atoms is an important subject for science education. To this end, this study explored student perceptions of atomic structure and how students learn about this concept by analyzing student mental models of atomic structure. Changes in student mental models serve as a valuable resource for comprehending student conceptual development. Data was collected from students who were taking the introductory chemistry course. Responses to course examinations, pre- and post-questionnaires, and pre- and post-interviews were used to analyze student mental models of atomic structure. First, this study reveals that conceptual development can be achieved, either by elevating mental models toward higher levels of understanding or by developing a single mental model. This study reinforces the importance of higher-order thinking skills to enable students to relate concepts in order to construct a target model of atomic structure. Second, Bohr's orbital structure seems to have had a strong influence on student perceptions of atomic structure. With regard to this finding, this study suggests that it is instructionally important to teach the concept of "orbitals" related to "quantum theory." Third, there were relatively few students who had developed understanding at the level of the target model, which required student understanding of the basic ideas of quantum theory. This study suggests that the understanding of atomic structure based on the idea of quantum theory is both important and difficult. Fourth, this study included different student assessments comprised of course examinations, questionnaires, and interviews. Each assessment can be used to gather information to map out student mental models. Fifth, in the comparison of the pre- and post-interview responses, this study showed that high achieving students moved toward more improved models or to advanced

A conceptual model specification language (CMSL Version 2)

NARCIS (Netherlands)

Wieringa, Roelf J.

1992-01-01

Version 2 of a language (CMSL) to specify conceptual models is defined. CMSL consists of two parts, the value specification language VSL and the object spercification language OSL. There is a formal semantics and an inference system for CMSL but research on this still continues. A method for

Conceptualization of a hypothetical high-level nuclear waste repository site in unsaturated, fractured tuff

International Nuclear Information System (INIS)

Parsons, A.M.; Olague, N.E.; Gallegos, D.P.

1991-01-01

Under the sponsorship of the US Nuclear Regulatory Commission (NRC), Sandia National Laboratories (SNL) is developing a performance assessment methodology for the analysis of long-term disposal and isolation of high-level nuclear wastes (HLW) in alternative geologic media. As part of this exercise, SNL created a conceptualization of ground-water flow and radionuclide transport in the far field of a hypothetical HLW repository site located in unsaturated, fractured tuff formations. This study provides a foundation for the development of conceptual mathematical, and numerical models to be used in this performance assessment methodology. This conceptualization is site specific in terms of geometry, the regional ground-water flow system, stratigraphy, and structure in that these are based on information from Yucca Mountain located on the Nevada Test Site. However, in terms of processes in unsaturated, fractured, porous media, the model is generic. This report also provides a review and evaluation of previously proposed conceptual models of unsaturated and saturated flow and solute transport. This report provides a qualitative description of a hypothetical HLW repository site in fractured tuff. However, evaluation of the current knowledge of flow and transport at Yucca Mountain does not yield a single conceptual model. Instead, multiple conceptual models are possible given the existing information

Conceptualization of a hypothetical high-level nuclear waste repository site in unsaturated, fractured tuff

Energy Technology Data Exchange (ETDEWEB)

Parsons, A.M.; Olague, N.E.; Gallegos, D.P. [Sandia National Labs., Albuquerque, NM (USA)

1991-01-01

Under the sponsorship of the US Nuclear Regulatory Commission (NRC), Sandia National Laboratories (SNL) is developing a performance assessment methodology for the analysis of long-term disposal and isolation of high-level nuclear wastes (HLW) in alternative geologic media. As part of this exercise, SNL created a conceptualization of ground-water flow and radionuclide transport in the far field of a hypothetical HLW repository site located in unsaturated, fractured tuff formations. This study provides a foundation for the development of conceptual mathematical, and numerical models to be used in this performance assessment methodology. This conceptualization is site specific in terms of geometry, the regional ground-water flow system, stratigraphy, and structure in that these are based on information from Yucca Mountain located on the Nevada Test Site. However, in terms of processes in unsaturated, fractured, porous media, the model is generic. This report also provides a review and evaluation of previously proposed conceptual models of unsaturated and saturated flow and solute transport. This report provides a qualitative description of a hypothetical HLW repository site in fractured tuff. However, evaluation of the current knowledge of flow and transport at Yucca Mountain does not yield a single conceptual model. Instead, multiple conceptual models are possible given the existing information.

Conceptual Model for Effective Sports Marketing in Nigeria | Akarah ...

African Journals Online (AJOL)

Conceptual Model for Effective Sports Marketing in Nigeria. ... that are influenced by the sports market mix and sports consumers that are influenced by psychological factors and notes that; ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Penerapan Model Pembelajaran Conceptual Understanding Procedures (CUPS sebagai Upaya Mengatasi Miskonsepsi Matematis Siswa

Directory of Open Access Journals (Sweden)

Asri Gita

2018-01-01

Full Text Available Kesalahan dalam memahami konsep menjadi salah satu faktor yang menyebabkan miskonsepsi pada pelajaran matematika. Miskonsepsi pada materi bangun datar disebabkan oleh cara belajar siswa yang hanya menghafalkan bentuk dasar tanpa memahami hubungan antar bangun datar dan sifat-sifatnya. Upaya yang dilakukan dalam mengatasi miskonsepsi tersebut adalah dengan menerapkan pembelajaran konstruktivis. Salah satu model pembelajaran konstruktivis adalah Conceptual Understanding Procedures (CUPs. Tujuan dari penelitian ini adalah untuk mengetahui penerapan model pembelajaran Conceptual Understanding Procedures (CUPs sebagai upaya mengatasi miskonsepsi matematis siswa pada materi sifat-sifat bangun datar segiempat. Subjek penelitian adalah 12 orang siswa SMP yang mengalami miskonsepsi pada materi sifat-sifat bangun datar segiempat. Teknik pengumpulan data pada penelitian ini melalui tes, video, observasi, dan wawancara. Validitas dan reliabilitas data melalui credibility, dependability, transferability, dan confirmability. Hasil dari penelitian ini menunjukkan bahwa penerapan model pembelajaran Conceptual Understanding Procedures (CUPs yang terdiri dari fase individu, fase kelompok triplet, dan fase interpretasi seluruh kelas dapat mengatasi miskonsepsi siswa pada materi sifat-sifat bangun datar segiempat. Perubahan miskonsepsi siswa juga dapat dilihat dari nilai tes yang mengalami peningkatan nilai berdasarkan nilai tes awal dan tes akhir siswa. Kata Kunci: Conceptual Understanding Procedures (CUPs, miskonsepsi, segiempat.   ABSTRACT Mistakes in understanding the concept became one of the factors that led to misconceptions in mathematics. The misconceptions in plane shapes are caused by the way of learning of students who only memorize the basic form without understanding the relationship between the plane shapes and its properties. Efforts made in overcoming these misconceptions is to apply constructivist learning. One of the constructivist learning

A Conceptual Model of Technology Transfer for Public Universities in Mexico

Directory of Open Access Journals (Sweden)

Hugo Necoechea

2013-12-01

Full Text Available Technology transfer from academic and scientific institutions has been transformed into a strategic variable for companies and nations who wish to cope with the challenges of a global economy. Since the early 1970s, many technology transfer models have tried to introduce key factors in the process. Previous studies have shown that technology transfer is influenced by various elements. This study is based on a review of two recent technology transfer models that we have used as basic concepts for developing our own conceptual model. Researcher–firm networks have been considered as key elements in the technology transfer process between public universities and firms. The conceptual model proposed could be useful to improve the efficiency of existing technology transfer mechanisms.

A year 2003 conceptual model for the U.S. telecommunications infrastructure.

Energy Technology Data Exchange (ETDEWEB)

Cox, Roger Gary; Reinert, Rhonda K.

2003-12-01

To model the telecommunications infrastructure and its role and robustness to shocks, we must characterize the business and engineering of telecommunications systems in the year 2003 and beyond. By analogy to environmental systems modeling, we seek to develop a 'conceptual model' for telecommunications. Here, the conceptual model is a list of high-level assumptions consistent with the economic and engineering architectures of telecommunications suppliers and customers, both today and in the near future. We describe the present engineering architectures of the most popular service offerings, and describe the supplier markets in some detail. We also develop a characterization of the customer base for telecommunications services and project its likely response to disruptions in service, base-lining such conjectures against observed behaviors during 9/11.

Loss, Psychosis, and Chronic Suicidality in a Korean American Immigrant Man: Integration of Cultural Formulation Model and Multicultural Case Conceptualization

Science.gov (United States)

Shea, Munyi; Yang, Lawrence H.; Leong, Frederick T. L.

2011-01-01

Culture shapes the nature, experience, and expression of psychopathology and help-seeking behavior across ethnically diverse groups. Although the study of psychopathology among Asian Americans has advanced, clinicians remain in need of culturally appropriate tools for the assessment and diagnosis of severe mental disorders including psychotic symptoms among Asian Americans. In this article, we present a brief overview of two culturally relevant conceptual tools: a) the Cultural Formulation Model, and b) the Multicultural Case Conceptualization approach. We use a case scenario to illustrate the integration of these two approaches in providing culturally responsive clinical conceptualization, assessment and treatment of a Korean American immigrant suffering from prominent psychiatric symptoms. We intend this discussion to engender further empirical work to advance our knowledge of the manifestation and experience of severe mental illness including psychotic disorders among Asian Americans, and contribute to culturally competent prevention and intervention of chronic and persistent mental illness within this group. PMID:21603157

Interacting Conceptual Spaces

OpenAIRE

Bolt, Josef; Coecke, Bob; Genovese, Fabrizio; Lewis, Martha; Marsden, Daniel; Piedeleu, Robin

2016-01-01

We propose applying the categorical compositional scheme of [6] to conceptual space models of cognition. In order to do this we introduce the category of convex relations as a new setting for categorical compositional semantics, emphasizing the convex structure important to conceptual space applications. We show how conceptual spaces for composite types such as adjectives and verbs can be constructed. We illustrate this new model on detailed examples.

Conceptual overview and preliminary risk assessment of cryogen use in deep underground mine production

Science.gov (United States)

Sivret, J.; Millar, D. L.; Lyle, G.

2017-12-01

This research conducts a formal risk assessment for cryogenic fueled equipment in underground environments. These include fans, load haul dump units, and trucks. The motivating advantage is zero-emissions production in the subsurface and simultaneous provision of cooling for ultra deep mine workings. The driving force of the engine is the expansion of the reboiled cryogen following flash evaporation using ambient temperature heat. The cold exhaust mixes with warm mine air and cools the latter further. The use of cryogens as ‘fuel’ leads to much increased fuel transport volumes and motivates special considerations for distribution infrastructure and process including: cryogenic storage, distribution, handling, and transfer systems. Detailed specification of parts and equipment, numerical modelling and preparation of design drawings are used to articulate the concept. The conceptual design process reveals new hazards and risks that the mining industry has not yet encountered, which may yet stymie execution. The major unwanted events include the potential for asphyxiation due to oxygen deficient atmospheres, or physical damage to workers due to exposure to sub-cooled liquids and cryogenic gases. The Global Minerals Industry Risk Management (GMIRM) framework incorporates WRAC and Bow-Tie techniques and is used to identify, assess and mitigate risks. These processes operate upon the competing conceptual designs to identify and eliminate high risk options and improve the safety of the lower risk designs.

Extracting conceptual models from user stories with Visual Narrator

NARCIS (Netherlands)

Lucassen, Garm; Robeer, Marcel; Dalpiaz, Fabiano; van der Werf, Jan Martijn E. M.; Brinkkemper, Sjaak

2017-01-01

Extracting conceptual models from natural language requirements can help identify dependencies, redundancies, and conflicts between requirements via a holistic and easy-to-understand view that is generated from lengthy textual specifications. Unfortunately, existing approaches never gained traction

Conceptual model for deriving the repository source term

International Nuclear Information System (INIS)

Alexander, D.H.; Apted, M.J.; Liebetrau, A.M.; Doctor, P.G.; Williford, R.E.; Van Luik, A.E.

1984-11-01

Part of a strategy for evaluating the compliance of geologic repositories with federal regulations is a modeling approach that would provide realistic release estimates for a particular configuration of the engineered-barrier system. The objective is to avoid worst-case bounding assumptions that are physically impossible or excessively conservative and to obtain probabilistic estimates of (1) the penetration time for metal barriers and (2) radionuclide-release rates for individually simulated waste packages after penetration has occurred. The conceptual model described in this paper will assume that release rates are explicitly related to such time-dependent processes as mass transfer, dissolution and precipitation, radionuclide decay, and variations in the geochemical environment. The conceptual model will take into account the reduction in the rates of waste-form dissolution and metal corrosion due to a buildup of chemical reaction products. The sorptive properties of the metal-barrier corrosion products in proximity to the waste form surface will also be included. Cumulative releases from the engineered-barrier system will be calculated by summing the releases from a probabilistically generated population of individual waste packages. 14 refs., 7 figs

Conceptual model for deriving the repository source term

International Nuclear Information System (INIS)

Alexander, D.H.; Apted, M.J.; Liebetrau, A.M.; Van Luik, A.E.; Williford, R.E.; Doctor, P.G.; Pacific Northwest Lab., Richland, WA; Roy F. Weston, Inc./Rogers and Assoc. Engineering Corp., Rockville, MD)

1984-01-01

Part of a strategy for evaluating the compliance of geologic repositories with Federal regulations is a modeling approach that would provide realistic release estimates for a particular configuration of the engineered-barrier system. The objective is to avoid worst-case bounding assumptions that are physically impossible or excessively conservative and to obtain probabilitistic estimates of (1) the penetration time for metal barriers and (2) radionuclide-release rates for individually simulated waste packages after penetration has occurred. The conceptual model described in this paper will assume that release rates are explicitly related to such time-dependent processes as mass transfer, dissolution and precipitation, radionuclide decay, and variations in the geochemical environment. The conceptual model will take into account the reduction in the rates of waste-form dissolution and metal corrosion due to a buildup of chemical reaction products. The sorptive properties of the metal-barrier corrosion products in proximity to the waste form surface will also be included. Cumulative released from the engineered-barrier system will be calculated by summing the releases from a probabilistically generated population of individual waste packages. 14 refs., 7 figs

Conceptual Modeling in the Time of the Revolution: Part II

Science.gov (United States)

Mylopoulos, John

Conceptual Modeling was a marginal research topic at the very fringes of Computer Science in the 60s and 70s, when the discipline was dominated by topics focusing on programs, systems and hardware architectures. Over the years, however, the field has moved to centre stage and has come to claim a central role both in Computer Science research and practice in diverse areas, such as Software Engineering, Databases, Information Systems, the Semantic Web, Business Process Management, Service-Oriented Computing, Multi-Agent Systems, Knowledge Management, and more. The transformation was greatly aided by the adoption of standards in modeling languages (e.g., UML), and model-based methodologies (e.g., Model-Driven Architectures) by the Object Management Group (OMG) and other standards organizations. We briefly review the history of the field over the past 40 years, focusing on the evolution of key ideas. We then note some open challenges and report on-going research, covering topics such as the representation of variability in conceptual models, capturing model intentions, and models of laws.

Geostatistical and adjoint sensitivity techniques applied to a conceptual model of ground-water flow in the Paradox Basin, Utah

International Nuclear Information System (INIS)

Metcalfe, D.E.; Campbell, J.E.; RamaRao, B.S.; Harper, W.V.; Battelle Project Management Div., Columbus, OH)

1985-01-01

Sensitivity and uncertainty analysis are important components of performance assessment activities for potential high-level radioactive waste repositories. The application of geostatistical and adjoint sensitivity techniques to aid in the calibration of an existing conceptual model of ground-water flow is demonstrated for the Leadville Limestone in Paradox Basin, Utah. The geostatistical method called kriging is used to statistically analyze the measured potentiometric data for the Leadville. This analysis consists of identifying anomalous data and data trends and characterizing the correlation structure between data points. Adjoint sensitivity analysis is then performed to aid in the calibration of a conceptual model of ground-water flow to the Leadville measured potentiometric data. Sensitivity derivatives of the fit between the modeled Leadville potentiometric surface and the measured potentiometric data to model parameters and boundary conditions are calculated by the adjoint method. These sensitivity derivatives are used to determine which model parameter and boundary condition values should be modified to most efficiently improve the fit of modeled to measured potentiometric conditions

Performance assessment of the Greater Confinement Disposal facility on the Nevada Test Site: Comparing the performance of two conceptual site models

International Nuclear Information System (INIS)

Baer, T.A.; Price, L.L.; Gallegos, D.P.

1993-01-01

A small amount of transuranic (TRU) waste has been disposed of at the Greater Confinement Disposal (GCD) site located on the Nevada Test Site's (NTS) Radioactive Waste Management Site (RWMS). The waste has been buried in several deep (37 m) boreholes dug into the floor of an alluvial basin. For the waste to remain in its current configuration, the DOE must demonstrate compliance of the site with the TRU disposal requirements, 40 CFR 191. Sandia's approach to process modelling in performance assessment is to use demonstrably conservative models of the site. Choosing the most conservative model, however, can be uncertain. As an example, diffusion of contaminants upward from the buried waste in the vadose zone water is the primary mechanism of release. This process can be modelled as straight upward planar diffusion or as spherical diffusion in all directions. The former has high fluxes but low release areas, the latter has lower fluxes but is spread over a greater area. We have developed analytic solutions to a simple test problem for both models and compared the total integrated discharges. The spherical diffusion conceptual model results in at least five times greater release to the accessible environment than the planar model at all diffusivities. Modifying the planar model to allow for a larger release, however, compensated for the smaller original planar discharge and resulted in a new planar model that was more conservative that the spherical model except at low diffusivities

Conceptual assessment tool for advanced undergraduate electrodynamics

Directory of Open Access Journals (Sweden)

Charles Baily

2017-09-01

Full Text Available As part of ongoing investigations into student learning in advanced undergraduate courses, we have developed a conceptual assessment tool for upper-division electrodynamics (E&M II: the Colorado UppeR-division ElectrodyNamics Test (CURrENT. This is a free response, postinstruction diagnostic with 6 multipart questions, an optional 3-question preinstruction test, and accompanying grading rubrics. The instrument’s development was guided by faculty-consensus learning goals and research into common student difficulties. It can be used to gauge the effectiveness of transformed pedagogy, and to gain insights into student thinking in the covered topic areas. We present baseline data representing 500 students across 9 institutions, along with validity, reliability, and discrimination measures of the instrument and scoring rubric.

Our evolving conceptual model of the coastal eutrophication problem

Science.gov (United States)

Cloern, James E.

2001-01-01

A primary focus of coastal science during the past 3 decades has been the question: How does anthropogenic nutrient enrichment cause change in the structure or function of nearshore coastal ecosystems? This theme of environmental science is recent, so our conceptual model of the coastal eutrophication problem continues to change rapidly. In this review, I suggest that the early (Phase I) conceptual model was strongly influenced by limnologists, who began intense study of lake eutrophication by the 1960s. The Phase I model emphasized changing nutrient input as a signal, and responses to that signal as increased phytoplankton biomass and primary production, decomposition of phytoplankton-derived organic matter, and enhanced depletion of oxygen from bottom waters. Coastal research in recent decades has identified key differences in the responses of lakes and coastal-estuarine ecosystems to nutrient enrichment. The contemporary (Phase II) conceptual model reflects those differences and includes explicit recognition of (1) system-specific attributes that act as a filter to modulate the responses to enrichment (leading to large differences among estuarine-coastal systems in their sensitivity to nutrient enrichment); and (2) a complex suite of direct and indirect responses including linked changes in: water transparency, distribution of vascular plants and biomass of macroalgae, sediment biogeochemistry and nutrient cycling, nutrient ratios and their regulation of phytoplankton community composition, frequency of toxic/harmful algal blooms, habitat quality for metazoans, reproduction/growth/survival of pelagic and benthic invertebrates, and subtle changes such as shifts in the seasonality of ecosystem functions. Each aspect of the Phase II model is illustrated here with examples from coastal ecosystems around the world. In the last section of this review I present one vision of the next (Phase III) stage in the evolution of our conceptual model, organized around 5

Regime transitions in near-surface temperature inversions : a conceptual model

NARCIS (Netherlands)

van de Wiel, B.J.H.; Vignon, E.; Baas, P.; Bosveld, F.C.; de Roode, S.R.; Moene, A.F.; Genthon, C.; van der Linden, Steven J.A.; van Hooft, J. Antoon; van Hooijdonk, I.G.S.

2017-01-01

A conceptual model is used in combination with observational analysis to understand regime transitions of near-surface temperature inversions at night as well as in Arctic conditions. The model combines a surface energy budget with a bulk parameterization for turbulent heat transport. Energy fluxes

A Conceptual Model of the World of Work.

Science.gov (United States)

VanRooy, William H.

The conceptual model described in this paper resulted from the need to organize a body of knowledge related to the world of work which would enable curriculum developers to prepare accurate, realistic instructional materials. The world of work is described by applying Malinowski's scientific study of the structural components of culture. It is…

Cultural competence in end-of-life care: terms, definitions, and conceptual models from the British literature.

Science.gov (United States)

Evans, Natalie; Meñaca, Arantza; Koffman, Jonathan; Harding, Richard; Higginson, Irene J; Pool, Robert; Gysels, Marjolein

2012-07-01

Cultural competency is increasingly recommended in policy and practice to improve end-of-life (EoL) care for minority ethnic groups in multicultural societies. It is imperative to critically analyze this approach to understand its underlying concepts. Our aim was to appraise cultural competency approaches described in the British literature on EoL care and minority ethnic groups. This is a critical review. Articles on cultural competency were identified from a systematic review of the literature on minority ethnic groups and EoL care in the United Kingdom. Terms, definitions, and conceptual models of cultural competency approaches were identified and situated according to purpose, components, and origin. Content analysis of definitions and models was carried out to identify key components. One-hundred thirteen articles on minority ethnic groups and EoL care in the United Kingdom were identified. Over half (n=60) contained a term, definition, or model for cultural competency. In all, 17 terms, 17 definitions, and 8 models were identified. The most frequently used term was "culturally sensitive," though "cultural competence" was defined more often. Definitions contained one or more of the components: "cognitive," "implementation," or "outcome." Models were categorized for teaching or use in patient assessment. Approaches were predominantly of American origin. The variety of terms, definitions, and models underpinning cultural competency approaches demonstrates a lack of conceptual clarity, and potentially complicates implementation. Further research is needed to compare the use of cultural competency approaches in diverse cultures and settings, and to assess the impact of such approaches on patient outcomes.

Nirex methodology for scenario and conceptual model development. An international peer review

International Nuclear Information System (INIS)

1999-06-01

Nirex has responsibilities for nuclear waste management in the UK. The company's top level objectives are to maintain technical credibility on deep disposal, to gain public acceptance for a deep geologic repository, and to provide relevant advice to customers on the safety implications of their waste packaging proposals. Nirex utilizes peer reviews as appropriate to keep its scientific tools up-to-date and to periodically verify the quality of its products. The NEA formed an International Review Team (IRT) consisting of four internationally recognised experts plus a member of the NEA Secretariat. The IRT performed an in-depth analysis of five Nirex scientific reports identified in the terms of reference of the review. The review was to primarily judge whether the Nirex methodology provides an adequate framework to support the building of a future licensing safety case. Another objective was to judge whether the methodology could aid in establishing a better understanding, and, ideally, enhance acceptance of a repository among stakeholders. Methodologies for conducting safety assessments include at a very basic level the identification of features, events, and processes (FEPs) relevant to the system at hand, their convolution in scenarios for analysis, and the formulation of conceptual models to be addressed through numerical modelling. The main conclusion of the IRT is that Nirex has developed a potentially sound methodology for the identification and analysis of FEPs and for the identification of conceptual model needs and model requirements. The work is still in progress and is not yet complete. (R.P.)

On the practical modeling of conceptual overlap among multiple facets in ontology domain concepts (Mini-thesis)

OpenAIRE

Rodriguez-Castro, Benedicto; Glaser, Hugh; Carr, Leslie

2007-01-01

This report presents a study on the practical modelling of the conceptual overlap that might exist among the multiple facets that define a particular ontology domain concept. The notions of conceptual overlap and facet are defined, together with their relation to scenarios of multiple inheritance in ontology models. Starting from the notion of a value partition, a terminology of ontology modelling constructs is introduced that allows the characterization of two types of conceptual overlap wit...

A simple conceptual model of abrupt glacial climate events

Directory of Open Access Journals (Sweden)

H. Braun

2007-11-01

Full Text Available Here we use a very simple conceptual model in an attempt to reduce essential parts of the complex nonlinearity of abrupt glacial climate changes (the so-called Dansgaard-Oeschger events to a few simple principles, namely (i the existence of two different climate states, (ii a threshold process and (iii an overshooting in the stability of the system at the start and the end of the events, which is followed by a millennial-scale relaxation. By comparison with a so-called Earth system model of intermediate complexity (CLIMBER-2, in which the events represent oscillations between two climate states corresponding to two fundamentally different modes of deep-water formation in the North Atlantic, we demonstrate that the conceptual model captures fundamental aspects of the nonlinearity of the events in that model. We use the conceptual model in order to reproduce and reanalyse nonlinear resonance mechanisms that were already suggested in order to explain the characteristic time scale of Dansgaard-Oeschger events. In doing so we identify a new form of stochastic resonance (i.e. an overshooting stochastic resonance and provide the first explicitly reported manifestation of ghost resonance in a geosystem, i.e. of a mechanism which could be relevant for other systems with thresholds and with multiple states of operation. Our work enables us to explicitly simulate realistic probability measures of Dansgaard-Oeschger events (e.g. waiting time distributions, which are a prerequisite for statistical analyses on the regularity of the events by means of Monte-Carlo simulations. We thus think that our study is an important advance in order to develop more adequate methods to test the statistical significance and the origin of the proposed glacial 1470-year climate cycle.

Structure of conceptual models in the senior operating staff of nuclear power plants

Directory of Open Access Journals (Sweden)

Oboznov A. A.

2017-09-01

Full Text Available Background. The relationships between conceptual model structures and an operator’s professional efficiency are of direct practical importance, particularly in the case of large-scale industrial complexes combining several human-machine systems. A typical example is the power unit of a nuclear power plant (NPP. Objective and methods. The purpose of this study was to explore the conceptual models of senior reactor operators (SROs of NPPs. The study involved 64 men working as SRO at five NPPs in Russia. The methods included: structured interviews, expert estimations, multidimensional scaling (ALSCAL, the K-means clustering algorithm, and frequency analysis. The procedure was as follows: 32 key characteristics of the power unit were defined, including shift operators’ jobs and duties, technical subsystems, types of equipment, and the crucial power unit parameters. The participants were offered a 32×32 matrix for pair-wise estimation of the strength of the links between these key characteristics on a seven-point scale (496 links in total. Results. A general scheme of key characteristics in the conceptual models was defined. is scheme was displayed in the operators regardless of their employment history. Within the scheme, however, two types of conceptual models were identified, which could be distinguished by the relative number of strong links between the key characteristics. With respect to intersystem links including key characteristics of the reactor and turbine NPP departments, this number was significantly higher in models of Type 1 than in those of Type 2. A positive correlation between the number of these links and the professional efficiency indicators was also established. Operators with Type 1 models were able to more predictably represent the power unit operation. Conclusion. The main role in creating predictable and efficient conceptual models was played by strong intersystem links in mental representations of workflow.

COPEWELL: A Conceptual Framework and System Dynamics Model for Predicting Community Functioning and Resilience After Disasters.

Science.gov (United States)

Links, Jonathan M; Schwartz, Brian S; Lin, Sen; Kanarek, Norma; Mitrani-Reiser, Judith; Sell, Tara Kirk; Watson, Crystal R; Ward, Doug; Slemp, Cathy; Burhans, Robert; Gill, Kimberly; Igusa, Tak; Zhao, Xilei; Aguirre, Benigno; Trainor, Joseph; Nigg, Joanne; Inglesby, Thomas; Carbone, Eric; Kendra, James M

2018-02-01

Policy-makers and practitioners have a need to assess community resilience in disasters. Prior efforts conflated resilience with community functioning, combined resistance and recovery (the components of resilience), and relied on a static model for what is inherently a dynamic process. We sought to develop linked conceptual and computational models of community functioning and resilience after a disaster. We developed a system dynamics computational model that predicts community functioning after a disaster. The computational model outputted the time course of community functioning before, during, and after a disaster, which was used to calculate resistance, recovery, and resilience for all US counties. The conceptual model explicitly separated resilience from community functioning and identified all key components for each, which were translated into a system dynamics computational model with connections and feedbacks. The components were represented by publicly available measures at the county level. Baseline community functioning, resistance, recovery, and resilience evidenced a range of values and geographic clustering, consistent with hypotheses based on the disaster literature. The work is transparent, motivates ongoing refinements, and identifies areas for improved measurements. After validation, such a model can be used to identify effective investments to enhance community resilience. (Disaster Med Public Health Preparedness. 2018;12:127-137).

The conceptual model of organization social responsibility

OpenAIRE

LUO, Lan; WEI, Jingfu

2014-01-01

With the developing of the research of CSR, people more and more deeply noticethat the corporate should take responsibility. Whether other organizations besides corporatesshould not take responsibilities beyond their field? This paper puts forward theconcept of organization social responsibility on the basis of the concept of corporate socialresponsibility and other theories. And the conceptual models are built based on theconception, introducing the OSR from three angles: the types of organi...

Development of two tier test to assess conceptual understanding in heat and temperature

Science.gov (United States)

Winarti; Cari; Suparmi; Sunarno, Widha; Istiyono, Edi

2017-01-01

Heat and temperature is a concept that has been learnt from primary school to undergraduate levels. One problem about heat and temperature is that they are presented abstractly, theoretical concept. A student conceptual frameworks develop from their daily experiences. The purpose of this research was to develop a two-tier test of heat and temperature concept and measure conceptual understanding of heat and temperature of the student. This study consist of two method is qualitative and quantitative method. The two-tier test was developed using procedures defined by Borg and Gall. The two-tier test consisted of 20 question and was tested for 137 students for collecting data. The result of the study showed that the two-tier test was effective in determining the students’ conceptual understanding and also it might be used as an alternative for assessment and evaluation of students’ achievement

Some problems with social cognition models: a pragmatic and conceptual analysis.

Science.gov (United States)

Ogden, Jane

2003-07-01

Empirical articles published between 1997 and 2001 from 4 health psychology journals that tested or applied 1 or more social cognition models (theory of reasoned action, theory of planned behavior, health belief model, and protection motivation theory; N = 47) were scrutinized for their pragmatic and conceptual basis. In terms of their pragmatic basis, these 4 models were useful for guiding research. The analysis of their conceptual basis was less positive. First, these models do not enable the generation of hypotheses because their constructs are unspecific; they therefore cannot be tested. Second, they focus on analytic truths rather than synthetic ones, and the conclusions resulting from their application are often true by definition rather than by observation. Finally, they may create and change both cognitions and behavior rather than describe them.

Studying the teaching of kindness: A conceptual model for evaluating kindness education programs in schools.

Science.gov (United States)

Kaplan, Deanna M; deBlois, Madeleine; Dominguez, Violeta; Walsh, Michele E

2016-10-01

Recent research suggests that school-based kindness education programs may benefit the learning and social-emotional development of youth and may improve school climate and school safety outcomes. However, how and to what extent kindness education programming influences positive outcomes in schools is poorly understood, and such programs are difficult to evaluate in the absence of a conceptual model for studying their effectiveness. In partnership with Kind Campus, a widely adopted school-based kindness education program that uses a bottom-up program framework, a methodology called concept mapping was used to develop a conceptual model for evaluating school-based kindness education programs from the input of 123 middle school students and approximately 150 educators, school professionals, and academic scholars. From the basis of this model, recommendations for processes and outcomes that would be useful to assess in evaluations of kindness education programs are made, and areas where additional instrument development may be necessary are highlighted. The utility of the concept mapping method as an initial step in evaluating other grassroots or non-traditional educational programming is also discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Computer-based Creativity Enhanced Conceptual Design Model for Non-routine Design of Mechanical Systems

Institute of Scientific and Technical Information of China (English)

LI Yutong; WANG Yuxin; DUFFY Alex H B

2014-01-01

Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

Computer-based creativity enhanced conceptual design model for non-routine design of mechanical systems

Science.gov (United States)

Li, Yutong; Wang, Yuxin; Duffy, Alex H. B.

2014-11-01

Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

Defining the end-point of mastication: A conceptual model.

Science.gov (United States)

Gray-Stuart, Eli M; Jones, Jim R; Bronlund, John E

2017-10-01

The great risks of swallowing are choking and aspiration of food into the lungs. Both are rare in normal functioning humans, which is remarkable given the diversity of foods and the estimated 10 million swallows performed in a lifetime. Nevertheless, it remains a major challenge to define the food properties that are necessary to ensure a safe swallow. Here, the mouth is viewed as a well-controlled processor where mechanical sensory assessment occurs throughout the occlusion-circulation cycle of mastication. Swallowing is a subsequent action. It is proposed here that, during mastication, temporal maps of interfacial property data are generated, which the central nervous system compares against a series of criteria in order to be sure that the bolus is safe to swallow. To determine these criteria, an engineering hazard analysis tool, alongside an understanding of fluid and particle mechanics, is used to deduce the mechanisms by which food may deposit or become stranded during swallowing. These mechanisms define the food properties that must be avoided. By inverting the thinking, from hazards to ensuring safety, six criteria arise which are necessary for a safe-to-swallow bolus. A new conceptual model is proposed to define when food is safe to swallow during mastication. This significantly advances earlier mouth models. The conceptual model proposed in this work provides a framework of decision-making to define when food is safe to swallow. This will be of interest to designers of dietary foods, foods for dysphagia sufferers and will aid the further development of mastication robots for preparation of artificial boluses for digestion research. It enables food designers to influence the swallow-point properties of their products. For example, a product may be designed to satisfy five of the criteria for a safe-to-swallow bolus, which means the sixth criterion and its attendant food properties define the swallow-point. Alongside other organoleptic factors, these

LCM 3.0: A Language for describing Conceptual Models

NARCIS (Netherlands)

Feenstra, Remco; Wieringa, Roelf J.

1993-01-01

The syntax of the conceptual model specification language LCM is defined. LCM uses equational logic to specify data types and order-sorted dynamic logic to specify objects with identity and mutable state. LCM specifies database transactions as finite sets of atomic object transitions.

Providing Context for Complexity: Using Infographics and Conceptual Models to Teach Global Change Processes

Science.gov (United States)

Bean, J. R.; White, L. D.

2015-12-01

Understanding modern and historical global changes requires interdisciplinary knowledge of the physical and life sciences. The Understanding Global Change website from the UC Museum of Paleontology will use a focal infographic that unifies diverse content often taught in separate K-12 science units. This visualization tool provides scientists with a structure for presenting research within the broad context of global change, and supports educators with a framework for teaching and assessing student understanding of complex global change processes. This new approach to teaching the science of global change is currently being piloted and refined based on feedback from educators and scientists in anticipation of a 2016 website launch. Global change concepts are categorized within the infographic as causes of global change (e.g., burning of fossil fuels, volcanism), ongoing Earth system processes (e.g., ocean circulation, the greenhouse effect), and the changes scientists measure in Earth's physical and biological systems (e.g., temperature, extinctions/radiations). The infographic will appear on all website content pages and provides a template for the creation of flowcharts, which are conceptual models that allow teachers and students to visualize the interdependencies and feedbacks among processes in the atmosphere, hydrosphere, biosphere, and geosphere. The development of this resource is timely given that the newly adopted Next Generation Science Standards emphasize cross-cutting concepts, including model building, and Earth system science. Flowchart activities will be available on the website to scaffold inquiry-based lessons, determine student preconceptions, and assess student content knowledge. The infographic has already served as a learning and evaluation tool during professional development workshops at UC Berkeley, Stanford University, and the Smithsonian National Museum of Natural History. At these workshops, scientists and educators used the infographic

Dispositions toward Teaching Spatial Thinking through Geography: Conceptualization and an Exemplar Assessment

Science.gov (United States)

Jo, Injeong; Bednarz, Sarah Witham

2014-01-01

The primary objectives of this article are: (1) to conceptualize teacher dispositions related to teaching spatial thinking in geography classrooms; and (2) to propose an exemplar assessment that can be used to prepare teachers who are disposed toward teaching spatial thinking through geography. A detailed description of the construction procedures…

Conceptual hydrologic model of flow in the unsaturated zone, Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Montazer, P.; Wilson, W.E.

1984-01-01

The purpose of this report is to propose a conceptual hydrologic model that reasonably describes the flow of fluids through the unsaturated zone at Yucca Mountain, for use as a basis for preliminary site-performance assessment and as a guide to further investigations. Scott and others (1983) presented an initial conceptual hydrogeologic model for the unsaturated zone at Yucca Mountain, based on detailed geologic, but very limited hydrologic, information. In this report, some of their concepts are examined and either supported or modified, and new concepts are developed. The model describes the manner in which flow probably occurs at Yucca Mountain and is based on: (1) current understanding of the hydrogeologic framework; (2) application of the principles of unsaturated flow; and (3) interpretation of some preliminary data from ongoing field and laboratory investigations. Included are extensive geologic information but relatively few hydrologic data that currently exist from the unsaturated zone in the Yucca Mountain area. Many uncertainties remain to be resolved concerning hydrologic conditions and processes. As a result, most of the concepts presented are intentionally descriptive and conjectural, with little quantitative basis provided. However, for the sake of directness and simplicity of expression, the model is presented as if it were a true expression of the facts. The authors recognize, and the reader should be aware, that the proposed model probably is not the only reasonable description that could be made at this point, and it certainly is subject to revision and quantification as more data become available. Although various alternative models probably could be developed, the one described in this report seems to fit current understanding of the unsaturated flow through a section of layered, fractured-rock formations with contrasting hydrologic properties, such as occurs at Yucca Mountain. 41 refs., 14 figs., 1 tab

Geomorphic dam-break flows. Part I: conceptual model

OpenAIRE

Leal, JGAB; Ferreira, RML; Cardoso, AH

2010-01-01

Proceedings of the Institution of Civil Engineers - Water Management 163 Issue WM6 This paper presents a one-dimensional conceptual model for simulating geomorphic dam-break flows. The model is based on conservation laws drawn from continuum mixture theory that are integrated over the flow depth,assuming that the f10w is composed of two transport layers. Closure equations were derived from the review and reanalysis of previous studies on granular flow,debris f10w and sheet flow. The sedime...

Prevention through Design Adoption Readiness Model (PtD ARM): An integrated conceptual model.

Science.gov (United States)

Weidman, Justin; Dickerson, Deborah E; Koebel, Charles T

2015-01-01

Prevention through Design (PtD), eliminating hazards at the design-stage of tools and systems, is the optimal method of mitigating occupational health and safety risks. A recent National Institute of Safety and Health initiative has established a goal to increase adoption of PtD innovation in industry. The construction industry has traditionally lagged behind other sectors in the adoption of innovation, in general; and of safety and health prevention innovation, in particular. Therefore, as a first step toward improving adoption trends in this sector, a conceptual model was developed to describe the parameters and causal relationships that influence and predict construction stakeholder "adoption readiness" for PtD technology innovation. This model was built upon three well-established theoretical frameworks: the Health Belief Model, the Diffusion of Innovation Model, and the Technology Acceptance Model. Earp and Ennett's model development methodology was employed to build a depiction of the key constructs and directionality and magnitude of relationships among them. Key constructs were identified from the literature associated with the three theoretical frameworks, with special emphasis given to studies related to construction or OHS technology adoption. A conceptual model is presented. Recommendations for future research are described and include confirmatory structural equation modeling of model parameters and relationships, additional descriptive investigation of barriers to adoption in some trade sectors, and design and evaluation of an intervention strategy.

Conceptualizing Programme Evaluation

Science.gov (United States)

Hassan, Salochana

2013-01-01

The main thrust of this paper deals with the conceptualization of theory-driven evaluation pertaining to a tutor training programme. Conceptualization of evaluation, in this case, is an integration between a conceptualization model as well as a theoretical framework in the form of activity theory. Existing examples of frameworks of programme…

A conceptual data model and modelling language for fields and agents

Science.gov (United States)

de Bakker, Merijn; de Jong, Kor; Schmitz, Oliver; Karssenberg, Derek

2016-04-01

Modelling is essential in order to understand environmental systems. Environmental systems are heterogeneous because they consist of fields and agents. Fields have a value defined everywhere at all times, for example surface elevation and temperature. Agents are bounded in space and time and have a value only within their bounds, for example biomass of a tree crown or the speed of a car. Many phenomena have properties of both fields and agents. Although many systems contain both fields and agents and integration of these concepts would be required for modelling, existing modelling frameworks concentrate on either agent-based or field-based modelling and are often low-level programming frameworks. A concept is lacking that integrates fields and agents in a way that is easy to use for modelers who are not software engineers. To address this issue, we develop a conceptual data model that represents fields and agents uniformly. We then show how the data model can be used in a high-level modelling language. The data model represents fields and agents in space-time. Also relations and networks can be represented using the same concepts. Using the conceptual data model we can represent static and mobile agents that may have spatial and temporal variation within their extent. The concepts we use are phenomenon, property set, item, property, domain and value. The phenomenon is the thing that is modelled, which can be any real world thing, for example trees. A phenomenon usually consists of several items, e.g. single trees. The domain is the spatiotemporal location and/or extent for which the items in the phenomenon are defined. Multiple different domains can coexist for a given phenomenon. For example a domain describing the extent of the trees and a domain describing the stem locations. The same goes for the property, which is an attribute of the thing that is being modeled. A property has a value, which is possibly discretized, for example the biomass over the tree crown

The Value of Conceptual Models in Coping with Complexity and Interdisciplinarity in Environmental Sciences Education

Science.gov (United States)

Fortuin, Karen P. J.; van Koppen, C. S. A.; Leemans, Rik

2011-01-01

Conceptual models are useful for facing the challenges of environmental sciences curriculum and course developers and students. These challenges are inherent to the interdisciplinary and problem-oriented character of environmental sciences curricula. In this article, we review the merits of conceptual models in facing these challenges. These…

The EBM-DPSER conceptual model: integrating ecosystem services into the DPSIR framework.

Directory of Open Access Journals (Sweden)

Christopher R Kelble

Full Text Available There is a pressing need to integrate biophysical and human dimensions science to better inform holistic ecosystem management supporting the transition from single species or single-sector management to multi-sector ecosystem-based management. Ecosystem-based management should focus upon ecosystem services, since they reflect societal goals, values, desires, and benefits. The inclusion of ecosystem services into holistic management strategies improves management by better capturing the diversity of positive and negative human-natural interactions and making explicit the benefits to society. To facilitate this inclusion, we propose a conceptual model that merges the broadly applied Driver, Pressure, State, Impact, and Response (DPSIR conceptual model with ecosystem services yielding a Driver, Pressure, State, Ecosystem service, and Response (EBM-DPSER conceptual model. The impact module in traditional DPSIR models focuses attention upon negative anthropomorphic impacts on the ecosystem; by replacing impacts with ecosystem services the EBM-DPSER model incorporates not only negative, but also positive changes in the ecosystem. Responses occur as a result of changes in ecosystem services and include inter alia management actions directed at proactively altering human population or individual behavior and infrastructure to meet societal goals. The EBM-DPSER conceptual model was applied to the Florida Keys and Dry Tortugas marine ecosystem as a case study to illustrate how it can inform management decisions. This case study captures our system-level understanding and results in a more holistic representation of ecosystem and human society interactions, thus improving our ability to identify trade-offs. The EBM-DPSER model should be a useful operational tool for implementing EBM, in that it fully integrates our knowledge of all ecosystem components while focusing management attention upon those aspects of the ecosystem most important to human society

The EBM-DPSER Conceptual Model: Integrating Ecosystem Services into the DPSIR Framework

Science.gov (United States)

Kelble, Christopher R.; Loomis, Dave K.; Lovelace, Susan; Nuttle, William K.; Ortner, Peter B.; Fletcher, Pamela; Cook, Geoffrey S.; Lorenz, Jerry J.; Boyer, Joseph N.

2013-01-01

There is a pressing need to integrate biophysical and human dimensions science to better inform holistic ecosystem management supporting the transition from single species or single-sector management to multi-sector ecosystem-based management. Ecosystem-based management should focus upon ecosystem services, since they reflect societal goals, values, desires, and benefits. The inclusion of ecosystem services into holistic management strategies improves management by better capturing the diversity of positive and negative human-natural interactions and making explicit the benefits to society. To facilitate this inclusion, we propose a conceptual model that merges the broadly applied Driver, Pressure, State, Impact, and Response (DPSIR) conceptual model with ecosystem services yielding a Driver, Pressure, State, Ecosystem service, and Response (EBM-DPSER) conceptual model. The impact module in traditional DPSIR models focuses attention upon negative anthropomorphic impacts on the ecosystem; by replacing impacts with ecosystem services the EBM-DPSER model incorporates not only negative, but also positive changes in the ecosystem. Responses occur as a result of changes in ecosystem services and include inter alia management actions directed at proactively altering human population or individual behavior and infrastructure to meet societal goals. The EBM-DPSER conceptual model was applied to the Florida Keys and Dry Tortugas marine ecosystem as a case study to illustrate how it can inform management decisions. This case study captures our system-level understanding and results in a more holistic representation of ecosystem and human society interactions, thus improving our ability to identify trade-offs. The EBM-DPSER model should be a useful operational tool for implementing EBM, in that it fully integrates our knowledge of all ecosystem components while focusing management attention upon those aspects of the ecosystem most important to human society and does so within

ITE CHARACTERIZATION TO SUPPORT CONCEPTUAL MODEL DEVELOPMENT FOR SUBSURFACE RADIONUCLIDE TRANSPORT

Science.gov (United States)

Remediation of radionuclide contaminants in ground water often begins with the development of conceptual and analytical models that guide our understanding of the processes controlling radionuclide transport. The reliability of these models is often predicated on the collection o...

A participative and facilitative conceptual modelling framework for discrete event simulation studies in healthcare

OpenAIRE

Kotiadis, Kathy; Tako, Antuela; Vasilakis, Christos

2014-01-01

Existing approaches to conceptual modelling (CM) in discrete-event simulation do not formally support the participation of a group of stakeholders. Simulation in healthcare can benefit from stakeholder participation as it makes possible to share multiple views and tacit knowledge from different parts of the system. We put forward a framework tailored to healthcare that supports the interaction of simulation modellers with a group of stakeholders to arrive at a common conceptual model. The fra...

Simulating runoff under changing climatic conditions: Revisiting an apparent deficiency of conceptual rainfall-runoff models

Science.gov (United States)

Fowler, Keirnan J. A.; Peel, Murray C.; Western, Andrew W.; Zhang, Lu; Peterson, Tim J.

2016-03-01

Hydrologic models have potential to be useful tools in planning for future climate variability. However, recent literature suggests that the current generation of conceptual rainfall runoff models tend to underestimate the sensitivity of runoff to a given change in rainfall, leading to poor performance when evaluated over multiyear droughts. This research revisited this conclusion, investigating whether the observed poor performance could be due to insufficient model calibration and evaluation techniques. We applied an approach based on Pareto optimality to explore trade-offs between model performance in different climatic conditions. Five conceptual rainfall runoff model structures were tested in 86 catchments in Australia, for a total of 430 Pareto analyses. The Pareto results were then compared with results from a commonly used model calibration and evaluation method, the Differential Split Sample Test. We found that the latter often missed potentially promising parameter sets within a given model structure, giving a false negative impression of the capabilities of the model. This suggests that models may be more capable under changing climatic conditions than previously thought. Of the 282[347] cases of apparent model failure under the split sample test using the lower [higher] of two model performance criteria trialed, 155[120] were false negatives. We discuss potential causes of remaining model failures, including the role of data errors. Although the Pareto approach proved useful, our aim was not to suggest an alternative calibration strategy, but to critically assess existing methods of model calibration and evaluation. We recommend caution when interpreting split sample results.

A Conceptual Space Logic

DEFF Research Database (Denmark)

Nilsson, Jørgen Fischer

1999-01-01

Conceptual spaces have been proposed as topological or geometric means for establishing conceptual structures and models. This paper, after briey reviewing conceptual spaces, focusses on the relationship between conceptual spaces and logical concept languages with operations for combining concepts...... to form concepts. Speci cally is introduced an algebraic concept logic, for which conceptual spaces are installed as semantic domain as replacement for, or enrichment of, the traditional....

A conceptual model for the development and management of the ...

African Journals Online (AJOL)

A conceptual model for the development and management of the Cape Flats ... rainfall; this rainfall pattern has implications for recharge and water management issues in ... Keywords: water resource management, Cape Town, water quality, ...

Introductory biology students' conceptual models and explanations of the origin of variation.

Science.gov (United States)

Speth, Elena Bray; Shaw, Neil; Momsen, Jennifer; Reinagel, Adam; Le, Paul; Taqieddin, Ranya; Long, Tammy

2014-01-01

Mutation is the key molecular mechanism generating phenotypic variation, which is the basis for evolution. In an introductory biology course, we used a model-based pedagogy that enabled students to integrate their understanding of genetics and evolution within multiple case studies. We used student-generated conceptual models to assess understanding of the origin of variation. By midterm, only a small percentage of students articulated complete and accurate representations of the origin of variation in their models. Targeted feedback was offered through activities requiring students to critically evaluate peers' models. At semester's end, a substantial proportion of students significantly improved their representation of how variation arises (though one-third still did not include mutation in their models). Students' written explanations of the origin of variation were mostly consistent with their models, although less effective than models in conveying mechanistic reasoning. This study contributes evidence that articulating the genetic origin of variation is particularly challenging for learners and may require multiple cycles of instruction, assessment, and feedback. To support meaningful learning of the origin of variation, we advocate instruction that explicitly integrates multiple scales of biological organization, assessment that promotes and reveals mechanistic and causal reasoning, and practice with explanatory models with formative feedback. © 2014 E. Bray Speth et al. CBE—Life Sciences Education © 2014 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

A conceptual framework for developing a critical thinking self-assessment scale.

Science.gov (United States)

Nair, Girija G; Stamler, Lynnette Leeseberg

2013-03-01

Nurses must be talented critical thinkers to cope with the challenges related to the ever-changing health care system, population trends, and extended role expectations. Several countries now recognize critical thinking skills (CTS) as an expected outcome of nursing education programs. Critical thinking has been defined in multiple ways by philosophers, critical thinking experts, and educators. Nursing experts conceptualize critical thinking as a process involving cognitive and affective domains of reasoning. Nurse educators are often challenged with teaching and measuring CTS because of their latent nature and the lack of a uniform definition of the concept. In this review of the critical thinking literature, we examine various definitions, identify a set of constructs that define critical thinking, and suggest a conceptual framework on which to base a self-assessment scale for measuring CTS. Copyright 2013, SLACK Incorporated.

A Generic Safety Assessment Model for a Trench Type LILW Repository

International Nuclear Information System (INIS)

Lee, Youn-Myoung; Choi, Hee-Joo

2015-01-01

This program is ready for a total system performance assessment and is able to deterministically and probabilistically evaluate the nuclide release from a repository and farther transport into the geosphere and biosphere under various normal circumstances, disruptive events, and scenarios that can occur after a failure of waste packages with associated uncertainty. Despite the conceptual design of a trench type LILW repository system, all parameter values associated with the repository system were assumed for the time being, and the generic model developed through this study should be helpful because the evaluation of such releases is very important. A simple and effective model for a safety assessment of a conceptual trench repository system, in which an LILW that arises from a nuclear power plant and other sources, has been developed. The computer program based on this model has also been developed as a GoldSim template using the commercial GoldSim development tool

A Generic Safety Assessment Model for a Trench Type LILW Repository

Energy Technology Data Exchange (ETDEWEB)

Lee, Youn-Myoung; Choi, Hee-Joo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-05-15

This program is ready for a total system performance assessment and is able to deterministically and probabilistically evaluate the nuclide release from a repository and farther transport into the geosphere and biosphere under various normal circumstances, disruptive events, and scenarios that can occur after a failure of waste packages with associated uncertainty. Despite the conceptual design of a trench type LILW repository system, all parameter values associated with the repository system were assumed for the time being, and the generic model developed through this study should be helpful because the evaluation of such releases is very important. A simple and effective model for a safety assessment of a conceptual trench repository system, in which an LILW that arises from a nuclear power plant and other sources, has been developed. The computer program based on this model has also been developed as a GoldSim template using the commercial GoldSim development tool.

Modeling Composite Assessment Data Using Item Response Theory

Science.gov (United States)

Ueckert, Sebastian

2018-01-01

Composite assessments aim to combine different aspects of a disease in a single score and are utilized in a variety of therapeutic areas. The data arising from these evaluations are inherently discrete with distinct statistical properties. This tutorial presents the framework of the item response theory (IRT) for the analysis of this data type in a pharmacometric context. The article considers both conceptual (terms and assumptions) and practical questions (modeling software, data requirements, and model building). PMID:29493119

BIM-enabled Conceptual Modelling and Representation of Building Circulation

OpenAIRE

Lee, Jin Kook; Kim, Mi Jeong

2014-01-01

This paper describes how a building information modelling (BIM)-based approach for building circulation enables us to change the process of building design in terms of its computational representation and processes, focusing on the conceptual modelling and representation of circulation within buildings. BIM has been designed for use by several BIM authoring tools, in particular with the widely known interoperable industry foundation classes (IFCs), which follow an object-oriented data modelli...

A conceptual model of referee efficacy

Directory of Open Access Journals (Sweden)

Félix eGuillén

2011-02-01

Full Text Available This paper presents a conceptual model of referee efficacy, defines the concept, proposes sources of referee specific efficacy information, and suggests consequences of having high or low referee efficacy. Referee efficacy is defined as the extent to which referees believe they have the capacity to perform successfully in their job. Referee efficacy beliefs are hypothesized to be influenced by mastery experiences, referee knowledge/education, support from significant others, physical/mental preparedness, environmental comfort, and perceived anxiety. In turn, referee efficacy beliefs are hypothesized to influence referee performance, referee stress, athlete rule violations, athlete satisfaction, and co-referee satisfaction.

Wargaming Effectiveness: Its Conceptualization and Assessment

National Research Council Canada - National Science Library

Cianciolo, Anna T; Sanders, William R; Black, Barbara A

2006-01-01

.... Cognitive task analysis was used to develop a conceptual framework for understanding the knowledge, skills, and other attributes that comprise the individual and team-related determinants, processes...

Strategies to Move From Conceptual Models to Quantifying Resilience in FEW Systems

Science.gov (United States)

Padowski, J.; Adam, J. C.; Boll, J.; Barber, M. E.; Cosens, B.; Goldsby, M.; Fortenbery, R.; Fowler, A.; Givens, J.; Guzman, C. D.; Hampton, S. E.; Harrison, J.; Huang, M.; Katz, S. L.; Kraucunas, I.; Kruger, C. E.; Liu, M.; Luri, M.; Malek, K.; Mills, A.; McLarty, D.; Pickering, N. B.; Rajagopalan, K.; Stockle, C.; Richey, A.; Voisin, N.; Witinok-Huber, B.; Yoder, J.; Yorgey, G.; Zhao, M.

2017-12-01

Understanding interdependencies within Food-Energy-Water (FEW) systems is critical to maintain FEW security. This project examines how coordinated management of physical (e.g., reservoirs, aquifers, and batteries) and non-physical (e.g., water markets, social capital, and insurance markets) storage systems across the three sectors promotes resilience. Coordination increases effective storage within the overall system and enhances buffering against shocks at multiple scales. System-wide resilience can be increased with innovations in technology (e.g., smart systems and energy storage) and institutions (e.g., economic systems and water law). Using the Columbia River Basin as our geographical study region, we use an integrated approach that includes a continuum of science disciplines, moving from theory to practice. In order to understand FEW linkages, we started with detailed, connected conceptual models of the food, energy, water, and social systems to identify where key interdependencies (i.e., overlaps, stocks, and flows) exist within and between systems. These are used to identify stress and opportunity points, develop innovation solutions across FEW sectors, remove barriers to the adoption of solutions, and quantify increases in system-wide resilience to regional and global change. The conceptual models act as a foundation from which we can identify key drivers, parameters, time steps, and variables of importance to build and improve existing systems dynamic and biophysical models. Our process of developing conceptual models and moving to integrated modeling is critical and serves as a foundation for coupling quantitative components with economic and social domain components and analyses of how these interact through time and space. This poster provides a description of this process that pulls together conceptual maps and integrated modeling output to quantify resilience across all three of the FEW sectors (a.k.a. "The Resilience Calculator"). Companion posters

Comparison of two conceptual models of flow using the TSA

International Nuclear Information System (INIS)

Wilson, M.L.

1992-01-01

Several new capabilities have been added to the Total-System Analyzer (TSA), including a new model of unsaturated flow and transport, two new models of source releases, a different computational method for saturated transport, and gas-release capability. In this paper these new capabilities are described, and a comparison is made of results from the two different conceptual models of unsaturated flow that are now part of the TSA, a composite-porosity model and a simple fracture-flow model

Conceptual model for quality of life among adults with congenital or early deafness.

Science.gov (United States)

Kushalnagar, Poorna; McKee, Michael; Smith, Scott R; Hopper, Melinda; Kavin, Denise; Atcherson, Samuel R

2014-07-01

A conceptual model of health-related quality of life (QoL) is needed to describe key themes that impact perceived QoL in adults with congenital or early deafness. To revise University of Washington Center for Disability Policy and Research's conceptual model of health promotion and QoL, with suggestions for applying the model to improving programs or services that target deaf adults with early deafness. Purposive and theoretical sampling of 35 adults who were born or became deaf early was planned in a 1-year study. In-depth semi-structured interviews probed deaf adult participants' perceptions about quality of life as a deaf individual. Data saturation was reached at the 17th interview with 2 additional interviews for validation, resulting in a total sample of 19 deaf adults. Coding and thematic analysis were conducted to develop the conceptual model. Our conceptual model delineates the relationships between health status (self-acceptance, coping with limitations), intrinsic (functional communication skills, navigating barriers/self-advocacy, resilience) and extrinsic (acceptance by others, access to information, educating others) factors in their influence on deaf adult quality of life outcomes at home, college, work, and in the community. Findings demonstrate the need for the programs and services to consider not only factors intrinsic to the deaf individual but also extrinsic factors in enhancing perceived quality of life outcomes among people with a range of functional hearing and language preferences, including American Sign Language. Copyright © 2014 Elsevier Inc. All rights reserved.

Introduction of a conceptual model for integrating the MMPI-2-RF into HCR-20V3 violence risk assessments and associations between the MMPI-2-RF and institutional violence.

Science.gov (United States)

Tarescavage, Anthony M; Glassmire, David M; Burchett, Danielle

2016-12-01

Reflecting the need to prevent violence, structured professional judgment assessment tools have been developed specifically to assess the likelihood of future violence. These tools typically integrate data from clinical interviews and collateral records to assist in the conceptualization of violence risk, but objective psychological testing may also be useful in completing the instruments. The authors describe the advantages of using the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF) in this manner with the Historical Clinical Management-20 Version 3 (HCR-20 V3 ). Accordingly, they have 2 purposes. First, they sought to identify conceptual links between the constructs measured by the tools and introduce a model to integrate MMPI-2-RF findings into an HCR-20 V3 risk assessment. Second, although the authors did not have collateral HCR-20 V3 ratings, they sought to examine associations between the MMPI-2-RF scales and future violence in a sample of 303 psychiatric patients (233 males, 70 females) adjudicated as not guilty by reason of insanity. The authors found that the MMPI-2-RF scales demonstrated significant, meaningful associations with a count of future violent acts at the hospital. The largest associations involved scales measuring emotional dysregulation and externalizing dysfunction. These associations were qualified by relative risk ratio analyses indicating that patients producing elevations on these scales were at 1.5 to 2.5 times greater risk of future violence than those without elevations. Overall, the findings indicated that most MMPI-2-RF scales conceptually linked to the HCR-20 V3 risk factors were associated with future violence. In light of these findings, the authors discuss recommendations for integrating the MMPI-2-RF when interpreting HCR-20 V3 risk factors. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Large regional groundwater modeling - a sensitivity study of some selected conceptual descriptions and simplifications

International Nuclear Information System (INIS)

Ericsson, Lars O.; Holmen, Johan

2010-12-01

The primary aim of this report is: - To present a supplementary, in-depth evaluation of certain conceptual simplifications, descriptions and model uncertainties in conjunction with regional groundwater simulation, which in the first instance refer to model depth, topography, groundwater table level and boundary conditions. Implementation was based on geo-scientifically available data compilations from the Smaaland region but different conceptual assumptions have been analysed

Social impact assessments: Developing a consolidated conceptual framework

Energy Technology Data Exchange (ETDEWEB)

Arce-Gomez, Antonio, E-mail: aarcegomez@swin.edu.au; Donovan, Jerome D., E-mail: jdonovan@swin.edu.au; Bedggood, Rowan E., E-mail: rbedggood@swin.edu.au

2015-01-15

Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focuses on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated.

Social impact assessments: Developing a consolidated conceptual framework

International Nuclear Information System (INIS)

Arce-Gomez, Antonio; Donovan, Jerome D.; Bedggood, Rowan E.

2015-01-01

Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focuses on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated

Preliminary geohydrologic conceptual model of the Los Medanos region near the Waste Isolation Pilot Plant for the purpose of performance assessment

International Nuclear Information System (INIS)

Brinster, K.F.

1991-01-01

This report describes a geohydrologic conceptual model of the northern Delaware Basin to be used in modeling three-dimensional, regional ground-water flow for assessing the performance of the Waste Isolation Pilot Plant (WIPP) in the Los Medanos region near Carlsbad, New Mexico. Geochemical and hydrological evidence indicates that flow is transient in the Rustler Formation and the Capitan aquifer in response to changing geologic, hydrologic, and climatic conditions. Before the Pleistocene, ground-water flow in the Rustler Formation was generally eastward, but uneven tilting of the Delaware Basin lowered the regional base level and formed fractures in the evaporitic sequence of rocks approximately parallel to the basin axis. Dissolution along the fractures, coupled with erosion, formed Nash Draw. Also, the drop in base level resulted in an increase in the carrying power of the Pecos River, which began incising the Capitan/aquifer near Carlsbad, New Mexico. Erosion and downcutting released hydraulic pressure that caused a reversal in Rustler ground-water flow direction near the WIPP. Flow in the Rustler west of the WIPP is toward Nash Draw and eventually toward Malaga Bend; flow south of the WIPP is toward Malaga Bend. 126 refs., 70 figs., 18 tabs

Development of the Conceptual Models for Chemical Conditions and Hydrology Used in the 1996 Performance Assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

LARSON, KURT W.

2000-01-01

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy (DOE) facility for the permanent disposal of defense-related transuranic (TRU) waste. US Environmental Protection Agency (EPA) regulations specify that the DOE must demonstrate on a sound basis that the WIPP disposal system will effectively contain long-lived alpha-emitting radionuclides within its boundaries for 10,000 years following closure. In 1996, the DOE submitted the ''40 CFR Part 191 Compliance Certification Application for the Waste Isolation Pilot Plant'' (CCA) to the EPA. The CCA proposed that the WIPP site complies with EPA's regulatory requirements. Contained within the CCA are descriptions of the scientific research conducted to characterize the properties of the WIPP site and the probabilistic performance assessment (PA) conducted to predict the containment properties of the WIPP disposal system. In May 1998, the EPA certified that the TRU waste disposal at the WIPP complies with its regulations. Waste disposal operations at WIPP commenced on March 28, 1999. The 1996 WIPP PA model of the disposal system included conceptual and mathematical representations of key hydrologic and geochemical processes. These key processes were identified over a 22-year period involving data collection, data interpretation, computer models, and sensitivity studies to evaluate the importance of uncertainty and of processes that were difficult to evaluate by other means. Key developments in the area of geochemistry were the evaluation of gas generation mechanisms in the repository; development of a model of chemical conditions in the repository and actinide concentrations in brine; selecting MgO backfill and demonstrating its effects experimentally; and determining the chemical retardation capability of the Culebra. Key developments in the area of hydrology were evacuating the potential for groundwater to dissolve the Salado Formation (the repository host formation), development of a regional model for

Development of the conceptual models for chemical conditions and hydrology used in the 1996 performance assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Larson, K.W.

2000-01-01

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy (DOE) facility for the permanent disposal of defense-related transuranic (TRU) waste. US Environmental Protection Agency (EPA) regulations specify that the DOE must demonstrate on a sound basis that the WIPP disposal system will effectively contain long-lived alpha-emitting radionuclides within its boundaries for 10,000 years following closure. In 1996, the DOE submitted the 40 CFR Part 191 Compliance Certification Application for the Waste Isolation Pilot Plant (CCA) to the EPA. The CCA proposed that the WIPP site complies with EPA's regulatory requirements. Contained within the CCA are descriptions of the scientific research conducted to characterize the properties of the WIPP site and the probabilistic performance assessment (PA) conducted to predict the containment properties of the WIPP disposal system. In May 1998, the EPA certified that the TRU waste disposal at the WIPP complies with its regulations. Waste disposal operations at WIPP commenced on 28 March 1999. The 1996 WIPP PA model of the disposal system included conceptual and mathematical representations of key hydrologic and geochemical processes. These key processes were identified over a 22-year period involving data collection, data interpretation, computer models, and sensitivity studies to evaluate the importance of uncertainty and of processes that were difficult to evaluate by other means. Key developments in the area of geochemistry were the evaluation of gas generation mechanisms in the repository; development of a model of chemical conditions in the repository and actinide concentrations in brine; selecting MgO backfill and demonstrating its effects experimentally; and, determining the chemical retardation capability of the Culebra. Key developments in the area of hydrology were evaluating the potential for groundwater to dissolve the Salado Formation (the repository host formation); development of a regional model for

Operations and support cost modeling of conceptual space vehicles

Science.gov (United States)

Ebeling, Charles

1994-01-01

The University of Dayton is pleased to submit this annual report to the National Aeronautics and Space Administration (NASA) Langley Research Center which documents the development of an operations and support (O&S) cost model as part of a larger life cycle cost (LCC) structure. It is intended for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of an operations and support life cycle cost model. Cost categories were initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. A revised cost element structure (CES), which is currently under study by NASA, was used to established the basic cost elements used in the model. While the focus of the effort was on operations and maintenance costs and other recurring costs, the computerized model allowed for other cost categories such as RDT&E and production costs to be addressed. Secondary tasks performed concurrent with the development of the costing model included support and upgrades to the reliability and maintainability (R&M) model. The primary result of the current research has been a methodology and a computer implementation of the methodology to provide for timely operations and support cost analysis during the conceptual design activities.

Colorado Upper-Division Electrostatics Diagnostic: A Conceptual Assessment for the Junior Level

Science.gov (United States)

Chasteen, Stephanie V.; Pepper, Rachel E.; Caballero, Marcos D.; Pollock, Steven J.; Perkins, Katherine K.

2012-01-01

As part of an effort to systematically improve our junior-level E&M I course, we have developed a tool to assess student conceptual learning of electrostatics at the upper division. Together with a group of physics faculty, we established a list of learning goals for the course that, with results from student observations and interviews,…

A Conceptual Model for Multidimensional Analysis of Documents

Science.gov (United States)

Ravat, Franck; Teste, Olivier; Tournier, Ronan; Zurlfluh, Gilles

Data warehousing and OLAP are mainly used for the analysis of transactional data. Nowadays, with the evolution of Internet, and the development of semi-structured data exchange format (such as XML), it is possible to consider entire fragments of data such as documents as analysis sources. As a consequence, an adapted multidimensional analysis framework needs to be provided. In this paper, we introduce an OLAP multidimensional conceptual model without facts. This model is based on the unique concept of dimensions and is adapted for multidimensional document analysis. We also provide a set of manipulation operations.

A note on the translation of conceptual data models into description logics: disjointness and covering assumptions

CSIR Research Space (South Africa)

Casini, G

2012-10-01

Full Text Available possibilities for conceptual data modeling. It also raises the question of how existing conceptual models using ER, UML or ORM could be translated into Description Logics (DLs), a family of logics that have proved to be particularly appropriate for formalizing...

A conceptual model for the fuel oxidation of defective fuel

International Nuclear Information System (INIS)

Higgs, J.D.; Lewis, B.J.; Thompson, W.T.; He, Z.

2007-01-01

A mechanistic conceptual model has been developed to predict the fuel oxidation behaviour in operating defective fuel elements for water-cooled nuclear reactors. This theoretical work accounts for gas-phase transport and sheath reactions in the fuel-to-sheath gap to determine the local oxygen potential. An improved thermodynamic analysis has also been incorporated into the model to describe the equilibrium state of the oxidized fuel. The fuel oxidation kinetics treatment accounts for multi-phase transport including normal diffusion and thermodiffusion for interstitial oxygen migration in the solid, as well as gas-phase transport in the fuel pellet cracks. The fuel oxidation treatment is further coupled to a heat conduction equation. A numerical solution of the coupled transport equations is obtained by a finite-element technique with the FEMLAB 3.1 software package. The model is able to provide radial-axial profiles of the oxygen-to-uranium ratio and the fuel temperatures as a function of time in the defective element for a wide range of element powers and defect sizes. The model results are assessed against coulometric titration measurements of the oxygen-to-metal profile for pellet samples taken from ten spent defective elements discharged from the National Research Universal Reactor at the Chalk River Laboratories and commercial reactors

A CONCEPTUAL MODEL OF THE LIFE CYCLE OF THE PROGRAM

Directory of Open Access Journals (Sweden)

Марія Костянтинівна СУХОНОС

2016-02-01

Full Text Available A conceptual model of the life cycle of the program is proposed. This model is based on the value approach. As a resulting index, it uses a category of complex structural value. This model renders the process of the life cycle of the program in the context of time/result. It assumes the presence of four basic phases of the life cycle, namely, initiation, planning, executing and closing. Also, this model formalizes interconnection of management processes of integration of program and management of its community and subprocesses. Selection of a value approach for the forming of a resulting index of a program determines by a variety of results of the program. This is a result of its variety and complexity in the process of finding a criterion for evaluation. Worked out a mechanism for assessing the value of the program. It consists of four steps and involves using of conventional methods (decomposition and expert estimates. As a unit of measurement assumes to use points and rating scale with the maximum score a hundred points. A complex value, which is evaluated at one hundred points, is a result of the program. It is critically important in the process of current and final evaluation of the program.

Revealing conceptual understanding of international business

NARCIS (Netherlands)

Sue Ashley; Dr. Harmen Schaap; Prof.Dr. Elly de Bruijn

2017-01-01

This study aims to identify an adequate approach for revealing conceptual understanding in higher professional education. Revealing students’ conceptual understanding is an important step towards developing effective curricula, assessment and aligned teaching strategies to enhance conceptual

Performance assessment of sealing systems. Conceptual and integrated modelling of plugs and seals

Energy Technology Data Exchange (ETDEWEB)

Ruebel, Andre; Buhmann, Dieter; Kindlein, Jonathan; Lauke, Thomas

2016-08-15

The long-time isolation of radionuclides from the biosphere is the goal of the storage of radioactive waste in deep geological repositories. For repositories in rock salt, this goal is achieved on the one hand by the impermeable undisturbed part of the salt host rock formation and on the other hand by crushed salt, which is used to backfill the mine openings in the emplacement areas and galleries created during the construction of the repository. The crushed salt backfill is compacted over time and achieves a sufficiently high hydraulic resistance to avoid inflow of brines into the emplacement areas of the repository in the long-term. Plugs and seals must additionally provide their sealing function during the early post closure phase, until the compaction of the backfill is adequate and the permeability of the backfill is sufficiently low. To assess the future development of the waste repository, an adequate knowledge of the material behaviour is necessary and related mathematical models must be developed to be able to perform predictions on the long-term safety of the repository. An integrated performance assessment model was formulated that describes the long-term behaviour of a sealing built from salt concrete. The average permeability of the sealing changes with time after its emplacement from various processes of which two were regarded in a constitutive model: first, the healing of the EDZ in the host rock around the sealing, and second, the corrosion of the salt concrete material resulting from brine attack. Empirical parameter model functions were defined for both processes to reflect the actual behaviour. The mathematical model was implemented in the integrated performance assessment model LOPOS which is used by GRS as near-field model for repositories in salt. Deterministic and probabilistic calculations were performed with realistic parameters showing how the permeability of the sealing decreases during the first 2 000 years due to the healing of the EDZ

Performance assessment of sealing systems. Conceptual and integrated modelling of plugs and seals

International Nuclear Information System (INIS)

Ruebel, Andre; Buhmann, Dieter; Kindlein, Jonathan; Lauke, Thomas

2016-08-01

The long-time isolation of radionuclides from the biosphere is the goal of the storage of radioactive waste in deep geological repositories. For repositories in rock salt, this goal is achieved on the one hand by the impermeable undisturbed part of the salt host rock formation and on the other hand by crushed salt, which is used to backfill the mine openings in the emplacement areas and galleries created during the construction of the repository. The crushed salt backfill is compacted over time and achieves a sufficiently high hydraulic resistance to avoid inflow of brines into the emplacement areas of the repository in the long-term. Plugs and seals must additionally provide their sealing function during the early post closure phase, until the compaction of the backfill is adequate and the permeability of the backfill is sufficiently low. To assess the future development of the waste repository, an adequate knowledge of the material behaviour is necessary and related mathematical models must be developed to be able to perform predictions on the long-term safety of the repository. An integrated performance assessment model was formulated that describes the long-term behaviour of a sealing built from salt concrete. The average permeability of the sealing changes with time after its emplacement from various processes of which two were regarded in a constitutive model: first, the healing of the EDZ in the host rock around the sealing, and second, the corrosion of the salt concrete material resulting from brine attack. Empirical parameter model functions were defined for both processes to reflect the actual behaviour. The mathematical model was implemented in the integrated performance assessment model LOPOS which is used by GRS as near-field model for repositories in salt. Deterministic and probabilistic calculations were performed with realistic parameters showing how the permeability of the sealing decreases during the first 2 000 years due to the healing of the EDZ

Identifying students’ mental models of sound propagation: The role of conceptual blending in understanding conceptual change

Directory of Open Access Journals (Sweden)

Zdeslav Hrepic

2010-09-01

Full Text Available We investigated introductory physics students’ mental models of sound propagation. We used a phenomenographic method to analyze the data in the study. In addition to the scientifically accepted Wave model, students used the “Entity” model to describe the propagation of sound. In this latter model sound is a self-standing entity, different from the medium through which it propagates. All other observed alternative models contain elements of both Entity and Wave models, but at the same time are distinct from each of the constituent models. We called these models “hybrid” or “blend” models. We discuss how students use these models in various contexts before and after instruction and how our findings contribute to the understanding of conceptual change. Implications of our findings for teaching are summarized.

Literature Review of Enterprise Systems Research Using Institutional Theory: Towards a Conceptual Model

DEFF Research Database (Denmark)

Svejvig, Per

This paper sets out to examine the use of institutional theory as a conceptually rich lens to study social issues of enterprise systems (ES) research. More precisely, the purpose is to categorize current ES research using institutional theory to develop a conceptual model that advances ES research...... model which advocates for multi-level and multi-theory approaches, and applies newer institutional aspects such as institutional logics. The findings show that institutional theory in ES research is in its infancy and adopts mainly traditional institutional aspects like isomorphism....... Key institutional features are presented such as isomorphism, rationalized myths, bridging macro and micro structures, and institutional logics and their implications for ES research are discussed. Through a literature review of 180 articles, of which 18 papers are selected, we build a conceptual...

Comparison of a Conceptual Groundwater Model and Physically Based Groundwater Mode

Science.gov (United States)

Yang, J.; Zammit, C.; Griffiths, J.; Moore, C.; Woods, R. A.

2017-12-01

Groundwater is a vital resource for human activities including agricultural practice and urban water demand. Hydrologic modelling is an important way to study groundwater recharge, movement and discharge, and its response to both human activity and climate change. To understand the groundwater hydrologic processes nationally in New Zealand, we have developed a conceptually based groundwater flow model, which is fully integrated into a national surface-water model (TopNet), and able to simulate groundwater recharge, movement, and interaction with surface water. To demonstrate the capability of this groundwater model (TopNet-GW), we applied the model to an irrigated area with water shortage and pollution problems in the upper Ruamahanga catchment in Great Wellington Region, New Zealand, and compared its performance with a physically-based groundwater model (MODFLOW). The comparison includes river flow at flow gauging sites, and interaction between groundwater and river. Results showed that the TopNet-GW produced similar flow and groundwater interaction patterns as the MODFLOW model, but took less computation time. This shows the conceptually-based groundwater model has the potential to simulate national groundwater process, and could be used as a surrogate for the more physically based model.

Impact of Learning Model Based on Cognitive Conflict toward Student’s Conceptual Understanding

Science.gov (United States)

Mufit, F.; Festiyed, F.; Fauzan, A.; Lufri, L.

2018-04-01

The problems that often occur in the learning of physics is a matter of misconception and low understanding of the concept. Misconceptions do not only happen to students, but also happen to college students and teachers. The existing learning model has not had much impact on improving conceptual understanding and remedial efforts of student misconception. This study aims to see the impact of cognitive-based learning model in improving conceptual understanding and remediating student misconceptions. The research method used is Design / Develop Research. The product developed is a cognitive conflict-based learning model along with its components. This article reports on product design results, validity tests, and practicality test. The study resulted in the design of cognitive conflict-based learning model with 4 learning syntaxes, namely (1) preconception activation, (2) presentation of cognitive conflict, (3) discovery of concepts & equations, (4) Reflection. The results of validity tests by some experts on aspects of content, didactic, appearance or language, indicate very valid criteria. Product trial results also show a very practical product to use. Based on pretest and posttest results, cognitive conflict-based learning models have a good impact on improving conceptual understanding and remediating misconceptions, especially in high-ability students.

Conceptual model of sedimentation in the Sacramento-San Joaquin River Delta

Science.gov (United States)

Schoellhamer, David H.; Wright, Scott A.; Drexler, Judith Z.

2012-01-01

Sedimentation in the Sacramento–San Joaquin River Delta builds the Delta landscape, creates benthic and pelagic habitat, and transports sediment-associated contaminants. Here we present a conceptual model of sedimentation that includes submodels for river supply from the watershed to the Delta, regional transport within the Delta and seaward exchange, and local sedimentation in open water and marsh habitats. The model demonstrates feedback loops that affect the Delta ecosystem. Submerged and emergent marsh vegetation act as ecosystem engineers that can create a positive feedback loop by decreasing suspended sediment, increasing water column light, which in turn enables more vegetation. Sea-level rise in open water is partially countered by a negative feedback loop that increases deposition if there is a net decrease in hydrodynamic energy. Manipulation of regional sediment transport is probably the most feasible method to control suspended sediment and thus turbidity. The conceptual model is used to identify information gaps that need to be filled to develop an accurate sediment transport model.

Conceptual model of management steadfast economic development production-economic systems

OpenAIRE

Prokhorova, V.

2010-01-01

The article is devoted developments of conceptual model of management proof economic development of the industrialeconomy systems. Features are certain, the algorithm of impulse is offered and intercommunication of contours of management proof economic development of the industrialeconomy systems is investigational

Development and validation of a mass casualty conceptual model.

Science.gov (United States)

Culley, Joan M; Effken, Judith A

2010-03-01

To develop and validate a conceptual model that provides a framework for the development and evaluation of information systems for mass casualty events. The model was designed based on extant literature and existing theoretical models. A purposeful sample of 18 experts validated the model. Open-ended questions, as well as a 7-point Likert scale, were used to measure expert consensus on the importance of each construct and its relationship in the model and the usefulness of the model to future research. Computer-mediated applications were used to facilitate a modified Delphi technique through which a panel of experts provided validation for the conceptual model. Rounds of questions continued until consensus was reached, as measured by an interquartile range (no more than 1 scale point for each item); stability (change in the distribution of responses less than 15% between rounds); and percent agreement (70% or greater) for indicator questions. Two rounds of the Delphi process were needed to satisfy the criteria for consensus or stability related to the constructs, relationships, and indicators in the model. The panel reached consensus or sufficient stability to retain all 10 constructs, 9 relationships, and 39 of 44 indicators. Experts viewed the model as useful (mean of 5.3 on a 7-point scale). Validation of the model provides the first step in understanding the context in which mass casualty events take place and identifying variables that impact outcomes of care. This study provides a foundation for understanding the complexity of mass casualty care, the roles that nurses play in mass casualty events, and factors that must be considered in designing and evaluating information-communication systems to support effective triage under these conditions.

CAPTURING UNCERTAINTY IN UNSATURATED-ZONE FLOW USING DIFFERENT CONCEPTUAL MODELS OF FRACTURE-MATRIX INTERACTION

International Nuclear Information System (INIS)

SUSAN J. ALTMAN, MICHAEL L. WILSON, GUMUNDUR S. BODVARSSON

1998-01-01

Preliminary calculations show that the two different conceptual models of fracture-matrix interaction presented here yield different results pertinent to the performance of the potential repository at Yucca Mountain. Namely, each model produces different ranges of flow in the fractures, where radionuclide transport is thought to be most important. This method of using different flow models to capture both conceptual model and parameter uncertainty ensures that flow fields used in TSPA calculations will be reasonably calibrated to the available data while still capturing this uncertainty. This method also allows for the use of three-dimensional flow fields for the TSPA-VA calculations

Conceptual model for reinforced grass on inner dike slopes

NARCIS (Netherlands)

Verhagen, H.J.; ComCoast

2005-01-01

A desk study has been carried out in order to develop a conceptual model for the erosion of inner dike slopes with reinforced grass cover. Based on the results the following can be concluded: The presence of a geosynthetic in a grass slope can be taken into account in the EPM method by increasing

Revealing Conceptual Understanding of International Business

Science.gov (United States)

Ashley, Sue; Schaap, Harmen; de Bruijn, Elly

2017-01-01

This study aims to identify an adequate approach for revealing conceptual understanding in higher professional education. Revealing students' conceptual understanding is an important step towards developing effective curricula, assessment and aligned teaching strategies to enhance conceptual understanding in higher education. Essays and concept…

Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

Science.gov (United States)

Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

2016-01-01

The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

A Conceptual Model for Analysing Management Development in the UK Hospitality Industry

Science.gov (United States)

Watson, Sandra

2007-01-01

This paper presents a conceptual, contingent model of management development. It explains the nature of the UK hospitality industry and its potential influence on MD practices, prior to exploring dimensions and relationships in the model. The embryonic model is presented as a model that can enhance our understanding of the complexities of the…

A Conceptual Model for Increasing Use of Electronic Medical Records by Primary Care Physicians Through End-User Support.

Science.gov (United States)

Randhawa, Gurprit K

2017-01-01

A conceptual model for exploring the relationship between end-user support (EUS) and electronic medical record (EMR) use by primary care physicians is presented. The model was developed following a review of conceptual and theoretical frameworks related to technology adoption/use and EUS. The model includes (a) one core construct (facilitating conditions), (b) four antecedents and one postcedent of facilitating conditions, and (c) four moderators. EMR use behaviour is the key outcome of the model. The proposed conceptual model should be tested. The model may be used to inform planning and decision-making for EMR implementations to increase EMR use for benefits realization.

A Conceptual Model for Maternal Behavior Among Polydrug Cocaine-Using Mothers: The Role of Postnatal Cocaine Use and Maternal Depression

OpenAIRE

Eiden, Rina D.; Stevens, Arianne; Schuetze, Pamela; Dombkowski, Laura E.

2006-01-01

This study examined the association between maternal cocaine use and maternal behavior and tested a conceptual model predicting maternal insensitivity during mother–infant interactions. Participants included 130 mother–infant dyads (68 cocaine-exposed and 62 noncocaine-exposed) who were recruited after birth and assessed at 4–8 weeks of infant age. Results of model testing indicated that when the effects of prenatal cocaine use were examined in the context of polydrug use, maternal psychopath...

A Conceptual Model of the Pasadena Housing System

Science.gov (United States)

Hirshberg, Alan S.; Barber, Thomas A.

1971-01-01

During the last 5 years, there have been several attempts at applying systems analysis to complex urban problems. This paper describes one such attempt by a multidisciplinary team of students, engineers, professors, and community representatives. The Project organization is discussed and the interaction of the different disciplines (the process) described. The two fundamental analysis questions posed by the Project were: "Why do houses deteriorate?" and "Why do people move?" The analysis of these questions led to the development of a conceptual system model of housing in Pasadena. The major elements of this model are described, and several conclusions drawn from it are presented.

Designing Public Library Websites for Teens: A Conceptual Model

Science.gov (United States)

Naughton, Robin Amanda

2012-01-01

The main goal of this research study was to develop a conceptual model for the design of public library websites for teens (TLWs) that would enable designers and librarians to create library websites that better suit teens' information needs and practices. It bridges a gap in the research literature between user interface design in human-computer…

Combined Estimation of Hydrogeologic Conceptual Model, Parameter, and Scenario Uncertainty with Application to Uranium Transport at the Hanford Site 300 Area

Energy Technology Data Exchange (ETDEWEB)

Meyer, Philip D.; Ye, Ming; Rockhold, Mark L.; Neuman, Shlomo P.; Cantrell, Kirk J.

2007-07-30

This report to the Nuclear Regulatory Commission (NRC) describes the development and application of a methodology to systematically and quantitatively assess predictive uncertainty in groundwater flow and transport modeling that considers the combined impact of hydrogeologic uncertainties associated with the conceptual-mathematical basis of a model, model parameters, and the scenario to which the model is applied. The methodology is based on a n extension of a Maximum Likelihood implementation of Bayesian Model Averaging. Model uncertainty is represented by postulating a discrete set of alternative conceptual models for a site with associated prior model probabilities that reflect a belief about the relative plausibility of each model based on its apparent consistency with available knowledge and data. Posterior model probabilities are computed and parameter uncertainty is estimated by calibrating each model to observed system behavior; prior parameter estimates are optionally included. Scenario uncertainty is represented as a discrete set of alternative future conditions affecting boundary conditions, source/sink terms, or other aspects of the models, with associated prior scenario probabilities. A joint assessment of uncertainty results from combining model predictions computed under each scenario using as weight the posterior model and prior scenario probabilities. The uncertainty methodology was applied to modeling of groundwater flow and uranium transport at the Hanford Site 300 Area. Eight alternative models representing uncertainty in the hydrogeologic and geochemical properties as well as the temporal variability were considered. Two scenarios represent alternative future behavior of the Columbia River adjacent to the site were considered. The scenario alternatives were implemented in the models through the boundary conditions. Results demonstrate the feasibility of applying a comprehensive uncertainty assessment to large-scale, detailed groundwater flow

The Conceptualization of the Mathematical Modelling Process in Technology-Aided Environment

Science.gov (United States)

Hidiroglu, Çaglar Naci; Güzel, Esra Bukova

2017-01-01

The aim of the study is to conceptualize the technology-aided mathematical modelling process in the frame of cognitive modelling perspective. The grounded theory approach was adopted in the study. The research was conducted with seven groups consisting of nineteen prospective mathematics teachers. The data were collected from the video records of…

Conceptual Model for Mitigating Human - Wildlife Conflict based on System Thinking

Science.gov (United States)

Patana, Pindi; Mawengkang, Herman; Silvi Lydia, Maya

2018-01-01

In conservation process it is unavoidably that conflict incidents may occur among the people and wild-life in the surrounding of the conservation area. Mitigating conflict between wildlife and people is considered a top conservation priority, particularly in landscapes where high densities of people and wildlife co-occur. This conflict is also happened in Leuser conservation area located in the border of North Sumatra and Aceh province, Indonesia. Easing the conflict problem is very difficult. This paper proposes a conceptual model based on system thinking to explore factors that may have great influence on the conflict and to figure out mitigating the conflict. We show how this conceptual framework can be utilized to analyze the conflict occur and further how it could used to develop a multi- criteria decision model.

Climate change and plant health; Development of a conceptual frame-work for impact assessment

NARCIS (Netherlands)

Breukers, M.L.H.

2010-01-01

This report presents a conceptual framework for systematic assessment of direct economic impacts of climate change on pest and disease management at the crop level. The framework evaluates and aggregates the effects, and subsequently impacts, of climate change on selected pests and diseases and

Energy, fatigue, or both? A bifactor modeling approach to the conceptualization and measurement of vitality.

Science.gov (United States)

Deng, Nina; Guyer, Rick; Ware, John E

2015-01-01

Vitality is an important domain reflecting both the physical and emotional components of health-related quality of life. Because of its complexity, it has been defined and measured both broadly and narrowly. We explored the dimensionality of a very comprehensive item bank hypothesized to measure vitality and its related concepts. Secondary analyses were conducted using the responses of 1,343 adults representative of the US general population to Internet-based surveys including 42 items compiled from multiple scales (e.g., SF-36 Vitality, PROMIS-Fatigue), covering a broad range of vitality-related content areas (energy, fatigue, and their interference with physical, mental, social activities, and quality of life). Exploratory and confirmatory factor models were evaluated independently using split-half samples. Bifactor model was used to assess the essential unidimensionality of the items, in comparison with traditional unidimensional, multidimensional, and hierarchical models. Method effects of a common scale or phrase were modeled via correlating errors. The exploratory factor analysis identified one dominant factor. The confirmatory factor analysis identified a best-fitting (CFI = 0.964, RMSEA = 0.084) bifactor model with one general (vitality) and two group (energy and fatigue) factors, explaining 69, 3, and 4 % of total variance. Correlating errors accounting for the method effects were important in identifying the substantive dimensionality of the items. The bifactor model proved to be useful for evaluating the dimensionality of a complex construct. Results supported conceptualizing and measuring vitality as a unidimensional energy-fatigue construct. We encourage future studies comparing practical implications of measures based on the broader and narrower conceptualizations of vitality.

Creating a Universe, a Conceptual Model

Directory of Open Access Journals (Sweden)

James R. Johnson

2016-10-01

Full Text Available Space is something. Space inherently contains laws of nature: universal rules (mathematics, space dimensions, types of forces, types of fields, and particle species, laws (relativity, quantum mechanics, thermodynamics, and electromagnetism and symmetries (Lorentz, Gauge, and symmetry breaking. We have significant knowledge about these laws of nature because all our scientific theories assume their presence. Their existence is critical for developing either a unique theory of our universe or more speculative multiverse theories. Scientists generally ignore the laws of nature because they “are what they are” and because visualizing different laws of nature challenges the imagination. This article defines a conceptual model separating space (laws of nature from the universe’s energy source (initial conditions and expansion (big bang. By considering the ramifications of changing the laws of nature, initial condition parameters, and two variables in the big bang theory, the model demonstrates that traditional fine tuning is not the whole story when creating a universe. Supporting the model, space and “nothing” are related to the laws of nature, mathematics and multiverse possibilities. Speculation on the beginning of time completes the model.

Purpose and Pedagogy: A Conceptual Model for an ePortfolio

Science.gov (United States)

Buyarski, Catherine A.; Aaron, Robert W.; Hansen, Michele J.; Hollingsworth, Cynthia D.; Johnson, Charles A.; Kahn, Susan; Landis, Cynthia M.; Pedersen, Joan S.; Powell, Amy A.

2015-01-01

This conceptual model emerged from the need to balance multiple purposes and perspectives associated with developing an ePortfolio designed to promote student development and success. A comprehensive review of literature from various disciplines, theoretical frameworks, and scholarship, including self-authorship, reflection, ePortfolio pedagogy,…

Model-Based Approaches for Teaching and Practicing Personality Assessment.

Science.gov (United States)

Blais, Mark A; Hopwood, Christopher J

2017-01-01

Psychological assessment is a complex professional skill. Competence in assessment requires an extensive knowledge of personality, neuropsychology, social behavior, and psychopathology, a background in psychometrics, familiarity with a range of multimethod tools, cognitive flexibility, skepticism, and interpersonal sensitivity. This complexity makes assessment a challenge to teach and learn, particularly as the investment of resources and time in assessment has waned in psychological training programs over the last few decades. In this article, we describe 3 conceptual models that can assist teaching and learning psychological assessments. The transtheoretical model of personality provides a personality systems-based framework for understanding how multimethod assessment data relate to major personality systems and can be combined to describe and explain complex human behavior. The quantitative psychopathology-personality trait model is an empirical model based on the hierarchical organization of individual differences. Application of this model can help students understand diagnostic comorbidity and symptom heterogeneity, focus on more meaningful high-order domains, and identify the most effective assessment tools for addressing a given question. The interpersonal situation model is rooted in interpersonal theory and can help students connect test data to here-and-now interactions with patients. We conclude by demonstrating the utility of these models using a case example.

TOWARDS A CONCEPTUAL FRAMEWORK OF ISLAMIC LEADERSHIP SUCCESSOR'S ATTRIBUTES MODEL AND GOOD GOVERNANCE

Directory of Open Access Journals (Sweden)

Naji Zuhair Alsarhi

2015-12-01

Full Text Available The purpose of this paper is to propose a conceptual model that explains the relationship between Islamic leadership successionpersonalityattributes and good governance. The paper sources information from an extensive search of literature to design a conceptual model of Islamic leadership succession (personal attributes & governmental characteristics of Succession and good governance. The model will provide an integration of relationships that will add valuable insights into improved leadership succession theory in the related literature. The paper may assist particularly policy makers and strategists to focus on new possibilities of leadership successors attributes that will lead to improved governance as well as government performance in the world in general, and the Palestine community, in particular.

Description and evaluation of a mechanistically based conceptual model for spall

Energy Technology Data Exchange (ETDEWEB)

Hansen, F.D.; Knowles, M.K.; Thompson, T.W. [and others

1997-08-01

A mechanistically based model for a possible spall event at the WIPP site is developed and evaluated in this report. Release of waste material to the surface during an inadvertent borehole intrusion is possible if future states of the repository include high gas pressure and waste material consisting of fine particulates having low mechanical strength. The conceptual model incorporates the physics of wellbore hydraulics coupled to transient gas flow to the intrusion borehole, and mechanical response of the waste. Degraded waste properties using of the model. The evaluations include both numerical and analytical implementations of the conceptual model. A tensile failure criterion is assumed appropriate for calculation of volumes of waste experiencing fragmentation. Calculations show that for repository gas pressures less than 12 MPa, no tensile failure occurs. Minimal volumes of material experience failure below gas pressure of 14 MPa. Repository conditions dictate that the probability of gas pressures exceeding 14 MPa is approximately 1%. For these conditions, a maximum failed volume of 0.25 m{sup 3} is calculated.

Description and evaluation of a mechanistically based conceptual model for spall

International Nuclear Information System (INIS)

Hansen, F.D.; Knowles, M.K.; Thompson, T.W.

1997-08-01

A mechanistically based model for a possible spall event at the WIPP site is developed and evaluated in this report. Release of waste material to the surface during an inadvertent borehole intrusion is possible if future states of the repository include high gas pressure and waste material consisting of fine particulates having low mechanical strength. The conceptual model incorporates the physics of wellbore hydraulics coupled to transient gas flow to the intrusion borehole, and mechanical response of the waste. Degraded waste properties using of the model. The evaluations include both numerical and analytical implementations of the conceptual model. A tensile failure criterion is assumed appropriate for calculation of volumes of waste experiencing fragmentation. Calculations show that for repository gas pressures less than 12 MPa, no tensile failure occurs. Minimal volumes of material experience failure below gas pressure of 14 MPa. Repository conditions dictate that the probability of gas pressures exceeding 14 MPa is approximately 1%. For these conditions, a maximum failed volume of 0.25 m 3 is calculated

Development of a hydrogeological conceptual wetland model in the data-scarce north-eastern region of Kilombero Valley, Tanzania

Science.gov (United States)

Burghof, Sonja; Gabiri, Geofrey; Stumpp, Christine; Chesnaux, Romain; Reichert, Barbara

2018-02-01

Understanding groundwater/surface-water interactions in wetlands is crucial because wetlands provide not only a high potential for agricultural production, but also sensitive and valuable ecosystems. This is especially true for the Kilombero floodplain wetland in Tanzania, which represents a data-scarce region in terms of hydrological and hydrogeological data. A comprehensive approach combining hydrogeological with tracer-based assessments was conducted, in order to develop a conceptual hydrogeological wetland model of the area around the city of Ifakara in the north-eastern region of Kilombero catchment. Within the study site, a heterogeneous porous aquifer, with a range of hydraulic conductivities, is underlain by a fractured-rock aquifer. Groundwater chemistry is mainly influenced by silicate weathering and depends on groundwater residence times related to the hydraulic conductivities of the porous aquifer. Groundwater flows from the hillside to the river during most of the year. While floodwater close to the river is mainly derived from overbank flow of the river, floodwater at a greater distance from the river mainly originates from precipitation and groundwater discharge. Evaporation effects in floodwater increase with increasing distance from the river. In general, the contribution of flood and stream water to groundwater recharge is negligible. In terms of an intensification of agricultural activities in the wetland, several conclusions can be drawn from the conceptual model. Results of this study are valuable as a base for further research related to groundwater/surface-water interactions and the conceptual model can be used in the future to set up numerical flow and transport models.

Conceptual and Numerical Modeling of Radionuclide Transport and Retention in Near-Surface Systems

International Nuclear Information System (INIS)

Pique, Angels; Arcos, David; Grandia, Fidel; Molinero, Jorge; Duro, Lara; Berglund, Sten

2013-01-01

Scenarios of barrier failure and radionuclide release to the near-surface environment are important to consider within performance and safety assessments of repositories for nuclear waste. A geological repository for spent nuclear fuel is planned at Forsmark, Sweden. Conceptual and numerical reactive transport models were developed in order to assess the retention capacity of the Quaternary till and clay deposits for selected radionuclides, in the event of an activity release from the repository. The elements considered were carbon (C), chlorine (Cl), cesium (Cs), iodine (I), molybdenum (Mo), niobium (Nb), nickel (Ni), radium (Ra), selenium (Se), strontium (Sr), technetium (Tc), thorium (Th), and uranium (U). According to the numerical predictions, the repository-derived nuclides that would be most significantly retained are Th, Ni, and Cs, mainly through sorption onto clays, followed by U, C, Sr, and Ra, trapped by sorption and/or incorporation into mineral phases

Testing a Conceptual Model of Working through Self-Defeating Patterns

Science.gov (United States)

Wei, Meifen; Ku, Tsun-Yao

2007-01-01

The present study developed and examined a conceptual model of working through self-defeating patterns. Participants were 390 college students at a large midwestern university. Results indicated that self-defeating patterns mediated the relations between attachment and distress. Also, self-esteem mediated the link between self-defeating patterns…

MODEL AUTHENTIC SELF-ASSESSMENT DALAM PENGEMBANGAN EMPLOYABILITY SKILLS MAHASISWA PENDIDIKAN TINGGI VOKASI

Directory of Open Access Journals (Sweden)

I Made Suarta

2015-06-01

______________________________________________________________ AUTHENTIC SELF-ASSESSMENT MODEL FOR DEVELOPING EMPLOYABILITY SKILLS STUDENT IN HIGHER VOCATIONAL EDUCATION Abstract The purpose of this research is to develop assessment tools to evaluate achievement of employability skills which are integrated in the learning database applications. The assessment model developed is a combination of self-assessment and authentic assessment, proposed as models of authentic self-assessment. The steps of developing authentic self-assessment models include: identifying the standards, selecting an authentic task, identifying the criteria for the task, and creating the rubric. The results of development assessment tools include: (1 problem solving skills assessment model, (2 self-management skills assessment model, and (3 competence database applications assessment model. This model can be used to assess the cognitive, affective, and psychomotor achievement. The results indicate: achievement of problem solving and self-management ability was in good category, and competencies in designing conceptual and logical database was in high category. This model also has met the basic principles of assessment, i.e.: validity, reliability, focused on competencies, comprehen-sive, objectivity, and the principle of educating. Keywords: authentic assessment, self-assessment, problem solving skills, self-management skills, vocational education

Triad Issue Paper: Using Geophysical Tools to Develop the Conceptual Site Model

Science.gov (United States)

This technology bulletin explains how hazardous-waste site professionals can use geophysical tools to provide information about subsurface conditions to create a more representative conceptual site model (CSM).

Revising a conceptual model of partnership and sustainability in global health.

Science.gov (United States)

Upvall, Michele J; Leffers, Jeanne M

2018-05-01

Models to guide global health partnerships are rare in the nursing literature. The Conceptual Model for Partnership and Sustainability in Global Health while significant was based on Western perspectives. The purpose of this study was to revise the model to include the voice of nurses from low- and middle-resource countries. Grounded theory was used to maintain fidelity with the design in the original model. A purposive sample of 15 participants from a variety of countries in Africa, the Caribbean, and Southeast Asia and having extensive experience in global health partnerships were interviewed. Skype recordings and in-person interviews were audiotaped using the same questions as the original study. Theoretical coding and a comparison of results with the original study was completed independently by the researchers. The process of global health partnerships was expanded from the original model to include engagement processes and processes for ongoing partnership development. New concepts of Transparency, Expanded World View, and Accompaniment were included as well as three broad themes: Geopolitical Influence, Power differential/Inequities, and Collegial Friendships. The revised conceptual model embodies a more comprehensive model of global health partnerships with representation of nurses from low- and middle-resource countries. © 2018 Wiley Periodicals, Inc.

A parsimonious dynamic model for river water quality assessment.

Science.gov (United States)

Mannina, Giorgio; Viviani, Gaspare

2010-01-01

Water quality modelling is of crucial importance for the assessment of physical, chemical, and biological changes in water bodies. Mathematical approaches to water modelling have become more prevalent over recent years. Different model types ranging from detailed physical models to simplified conceptual models are available. Actually, a possible middle ground between detailed and simplified models may be parsimonious models that represent the simplest approach that fits the application. The appropriate modelling approach depends on the research goal as well as on data available for correct model application. When there is inadequate data, it is mandatory to focus on a simple river water quality model rather than detailed ones. The study presents a parsimonious river water quality model to evaluate the propagation of pollutants in natural rivers. The model is made up of two sub-models: a quantity one and a quality one. The model employs a river schematisation that considers different stretches according to the geometric characteristics and to the gradient of the river bed. Each stretch is represented with a conceptual model of a series of linear channels and reservoirs. The channels determine the delay in the pollution wave and the reservoirs cause its dispersion. To assess the river water quality, the model employs four state variables: DO, BOD, NH(4), and NO. The model was applied to the Savena River (Italy), which is the focus of a European-financed project in which quantity and quality data were gathered. A sensitivity analysis of the model output to the model input or parameters was done based on the Generalised Likelihood Uncertainty Estimation methodology. The results demonstrate the suitability of such a model as a tool for river water quality management.

A conceptual holding model for veterinary applications

Directory of Open Access Journals (Sweden)

Nicola Ferrè

2014-05-01

Full Text Available Spatial references are required when geographical information systems (GIS are used for the collection, storage and management of data. In the veterinary domain, the spatial component of a holding (of animals is usually defined by coordinates, and no other relevant information needs to be interpreted or used for manipulation of the data in the GIS environment provided. Users trying to integrate or reuse spatial data organised in such a way, frequently face the problem of data incompatibility and inconsistency. The root of the problem lies in differences with respect to syntax as well as variations in the semantic, spatial and temporal representations of the geographic features. To overcome these problems and to facilitate the inter-operability of different GIS, spatial data must be defined according to a “schema” that includes the definition, acquisition, analysis, access, presentation and transfer of such data between different users and systems. We propose an application “schema” of holdings for GIS applications in the veterinary domain according to the European directive framework (directive 2007/2/EC - INSPIRE. The conceptual model put forward has been developed at two specific levels to produce the essential and the abstract model, respectively. The former establishes the conceptual linkage of the system design to the real world, while the latter describes how the system or software works. The result is an application “schema” that formalises and unifies the information-theoretic foundations of how to spatially represent a holding in order to ensure straightforward information-sharing within the veterinary community.

Conceptual model and evaluation of generated power and emissions in an IGCC plant

International Nuclear Information System (INIS)

Perez-Fortes, M.; Bojarski, A.D.; Velo, E.; Nougues, J.M.; Puigjaner, L.

2009-01-01

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data.

Conceptual model and evaluation of generated power and emissions in an IGCC plant

Energy Technology Data Exchange (ETDEWEB)

Perez-Fortes, M.; Bojarski, A. D.; Velo, E.; Nougues, J. M. [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain); Puigjaner, L., E-mail: luis.puigjaner@upc.edu [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain)

2009-10-15

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data.

Conceptual model and evaluation of generated power and emissions in an IGCC plant

Energy Technology Data Exchange (ETDEWEB)

Perez-Fortes, M; Bojarski, A D; Velo, E; Nougues, J M; Puigjaner, L [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain)

2009-10-15

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data. (author)

Conceptual model and evaluation of generated power and emissions in an IGCC plant

Energy Technology Data Exchange (ETDEWEB)

Perez-Fortes, M.; Bojarski, A.D.; Velo, E.; Nougues, J.M.; Puigjaner, L. [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain)

2009-10-15

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data. (author)

A conceptual model of psychological contracts in construction projects

Directory of Open Access Journals (Sweden)

Yongjian Ke

2016-09-01

Full Text Available The strategic importance of relationship style contracting is recognised in the construction industry. Both public and private sector clients are stipulating more integrated and collaborative forms of procurement. Despite relationship and integrated contractual arrangement being available for some time, it is clear that construction firms have been slow to adopt them. Hence it is timely to examine how social exchanges, via unwritten agreement and behaviours, are being nurtured in construction projects. This paper adopted the concept of Psychological Contracts (PC to describe unwritten agreement and behaviours. A conceptual model of the PC is developed and validated using the results from a questionnaire survey administered to construction professionals in Australia. The results uncovered the relationships that existed amongst relational conditions and relational benefits, the PC and the partners’ satisfaction. The results show that all the hypotheses in the conceptual model of the PC are supported, suggesting the PC model is important and may have an effect on project performance and relationship quality among contracting parties. A validated model of the PC in construction was then developed based on the correlations among each component. The managerial implications are that past relationships and relationship characteristics should be taken into account in the selection of procurement partners and the promise of future resources, support and tangible relational outcomes are also vital. It is important for contracting parties to pay attention to unwritten agreements (the PC and behaviours when managing construction projects.

The Peace and Power Conceptual Model: An Assessment Guide for School Nurses Regarding Commercial Sexual Exploitation of Children.

Science.gov (United States)

Fraley, Hannah E; Aronowitz, Teri

2017-10-01

Human trafficking is a global problem; more than half of all victims are children. In the United States (US), at-risk youth continue to attend school. School nurses are on the frontlines, presenting a window of opportunity to identify and prevent exploitation. Available papers targeting school nurses report that school nurses may lack awareness of commercial sexual exploitation and may have attitudes and misperceptions about behaviors of school children at risk. This is a theoretical paper applying the Peace and Power Conceptual Model to understand the role of school nurses in commercial sexual exploitation of children.

Qualitative risk assessment: a conceptual context and three diverse applications

International Nuclear Information System (INIS)

Elsea, K.J.; Conger, D.S.

1992-01-01

Risk is defined as the probability of an occurrence multiplied by the consequences of that occurrence. Such a definition implies a quantitative or at least a mathematical operation. However, qualitative uses of risk have proved useful tools in incident investigation and management decision making. This paper provides a conceptual context for qualitative risk assessment and discusses three efforts at subject organizations [an aerospace firm, a US Department of Energy weapons-related facility, and a commercial nuclear reactor] that have applied qualitative risk techniques for different uses and with different results. A lessons-learned section summarizes and provides future direction

Religion and Spirituality's Influences on HIV Syndemics Among MSM: A Systematic Review and Conceptual Model.

Science.gov (United States)

Lassiter, Jonathan M; Parsons, Jeffrey T

2016-02-01

This paper presents a systematic review of the quantitative HIV research that assessed the relationships between religion, spirituality, HIV syndemics, and individual HIV syndemics-related health conditions (e.g. depression, substance abuse, HIV risk) among men who have sex with men (MSM) in the United States. No quantitative studies were found that assessed the relationships between HIV syndemics, religion, and spirituality. Nine studies, with 13 statistical analyses, were found that examined the relationships between individual HIV syndemics-related health conditions, religion, and spirituality. Among the 13 analyses, religion and spirituality were found to have mixed relationships with HIV syndemics-related health conditions (6 nonsignificant associations; 5 negative associations; 2 positive associations). Given the overall lack of inclusion of religion and spirituality in HIV syndemics research, a conceptual model that hypothesizes the potential interactions of religion and spirituality with HIV syndemics-related health conditions is presented. The implications of the model for MSM's health are outlined.

A New Conceptual Model for Understanding International Students' College Needs

Science.gov (United States)

Alfattal, Eyad

2016-01-01

This study concerns the theory and practice of international marketing in higher education with the purpose of exploring a conceptual model for understanding international students' needs in the context of a four-year college in the United States. A transcendental phenomenological design was employed to investigate the essence of international…

Theory analysis of the Dental Hygiene Human Needs Conceptual Model.

Science.gov (United States)

MacDonald, L; Bowen, D M

2017-11-01

Theories provide a structural knowing about concept relationships, practice intricacies, and intuitions and thus shape the distinct body of the profession. Capturing ways of knowing and being is essential to any professions' practice, education and research. This process defines the phenomenon of the profession - its existence or experience. Theory evaluation is a systematic criterion-based assessment of a specific theory. This study presents a theory analysis of the Dental Hygiene Human Needs Conceptual Model (DH HNCM). Using the Walker and Avant Theory Analysis, a seven-step process, the DH HNCM, was analysed and evaluated for its meaningfulness and contribution to dental hygiene. The steps include the following: (i) investigate the origins; (ii) examine relationships of the theory's concepts; (iii) assess the logic of the theory's structure; (iv) consider the usefulness to practice; (v) judge the generalizability; (vi) evaluate the parsimony; and (vii) appraise the testability of the theory. Human needs theory in nursing and Maslow's Hierarchy of Need Theory prompted this theory's development. The DH HNCM depicts four concepts based on the paradigm concepts of the profession: client, health/oral health, environment and dental hygiene actions, and includes validated eleven human needs that evolved overtime to eight. It is logical, simplistic, allows scientific predictions and testing, and provides a unique lens for the dental hygiene practitioner. With this model, dental hygienists have entered practice, knowing they enable clients to meet their human needs. For the DH HNCM, theory analysis affirmed that the model is reasonable and insightful and adds to the dental hygiene professions' epistemology and ontology. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

From conceptual model to remediation: bioavailability, a key to clean up heavy metal contaminated soils.

Science.gov (United States)

Petruzzelli, Gianniantonio; Pedron, Francesca; Pezzarossa, Beatrice

2013-04-01

Processes of metal bioavailability in the soil To know the bioavailability processes at site specific levels is essential to understand in detail the risks associated with pollution, and to support the decision-making process, i.e. description of the conceptual model and choice of clean up technologies. It is particularly important to assess how chemical, physical and biological processes in the soil affect the reactions leading to adsorption, precipitation or release of contaminants. The measurement of bioavailability One of the main difficulties in the practical application of the bioavailability concept in soil remediation is the lack of consensus on the method to be used to measure bioavailability. The best strategy is to apply a series of tests to assess bioavailability, since no applicable method is universally valid under all conditions. As an example, bioavailability tests for phytotechnology application should consider two distinct aspects: a physico-chemical driven solubilization process and a physiologically driven uptake process. Soil and plant characteristics strongly influence bioavailability. Bioavailability as a tool in remediation strategies Bioavailability can be used at all stages in remediation strategies: development of the conceptual model, evaluation of risk assessment, and selection of the best technology, considering different scenarios and including different environmental objectives. Two different strategies can be followed: the reduction and the increase of bioavailability. Procedures that reduce bioavailability aim to prevent the movement of pollutants from the soil to the living organisms, essentially by: i) removal of the labile phase of the contaminant, i.e. the fraction which is intrinsic to the processes of bioavailability (phytostabilization); ii) conversion of the labile fraction into a stable fraction (precipitation or adsorption); iii) increase of the resistance to mass transfer of the contaminants (inertization). Procedures

Process-based interpretation of conceptual hydrological model performance using a multinational catchment set

Science.gov (United States)

Poncelet, Carine; Merz, Ralf; Merz, Bruno; Parajka, Juraj; Oudin, Ludovic; Andréassian, Vazken; Perrin, Charles

2017-08-01

Most of previous assessments of hydrologic model performance are fragmented, based on small number of catchments, different methods or time periods and do not link the results to landscape or climate characteristics. This study uses large-sample hydrology to identify major catchment controls on daily runoff simulations. It is based on a conceptual lumped hydrological model (GR6J), a collection of 29 catchment characteristics, a multinational set of 1103 catchments located in Austria, France, and Germany and four runoff model efficiency criteria. Two analyses are conducted to assess how features and criteria are linked: (i) a one-dimensional analysis based on the Kruskal-Wallis test and (ii) a multidimensional analysis based on regression trees and investigating the interplay between features. The catchment features most affecting model performance are the flashiness of precipitation and streamflow (computed as the ratio of absolute day-to-day fluctuations by the total amount in a year), the seasonality of evaporation, the catchment area, and the catchment aridity. Nonflashy, nonseasonal, large, and nonarid catchments show the best performance for all the tested criteria. We argue that this higher performance is due to fewer nonlinear responses (higher correlation between precipitation and streamflow) and lower input and output variability for such catchments. Finally, we show that, compared to national sets, multinational sets increase results transferability because they explore a wider range of hydroclimatic conditions.

A Comprehensive and Systematic Approach to Developing and Documenting Conceptual Models of Contaminant Release and Migration at the Hanford Site

International Nuclear Information System (INIS)

Last, George V.; Rohay, Virginia J.; Schelling, F J.; Bunn, Amoret L.; Delamare, Michael A.; Dirkes, Roger L.; Hildebrand, R D.; Morse, John G.; Napier, Bruce A.; Riley, Robert G.; Soler, Luis; Thorne, Paul D.

2004-01-01

The U. S. Department of Energy?s Richland Operations Office has initiated efforts to adapt and implement the Features, Events, and Processes (FEPs) methodology (used in scenario development for nuclear waste disposal programs) to the environmental management and remediation problems facing the Hanford Site. These efforts have shown that modification of the FEPs methodology to incorporate the use of Process Relationship Diagrams (PRD) is effective in facilitating the development of conceptual models and selection of potentially relevant factors to be incorporated into a specific performance assessment. In developing this methodology for Hanford, a master PRD was created to provide an organization structure for identifying the potentially relevant factors (i.e. FEPs) and for illustrating the relationships between these factors. This organizational framework was developed to match the organization of current Hanford site-wide performance assessment activities and to facilitate screening of the FEPs relevant to the problems (and conceptual models) that need to be addressed at the site. However, the link between Hanford specific FEPs and the international list of FEPs was maintained to demonstrate completeness and perhaps to expand the usefulness of the international list for other environmental programs

The impact and effectiveness of health impact assessment: A conceptual framework

International Nuclear Information System (INIS)

Harris-Roxas, Ben; Harris, Elizabeth

2013-01-01

The use of health impact assessment (HIA) has expanded rapidly and there are increasing demands for it to demonstrate its effectiveness. This paper presents a conceptual framework for evaluating HIA and describes its development through (i) a review of the literature, (ii) a review of work undertaken as part of a major HIA capacity building project and (iii) an in-depth study of seven completed HIAs. The framework emphasises context, process and impacts as key domains in understanding and evaluating the effectiveness of an HIA. This new framework builds upon the existing approaches to evaluating HIA and extends them to reflect the broad range of factors that comprise and influence the effectiveness of HIAs. It may be of use in evaluating completed HIAs and in planning HIAs that are yet to be undertaken. -- Highlights: ► The first empirically-derived conceptual framework for evaluating HIA ► It may also be useful for planning and reporting on HIAs. ► The framework emphasises context, process and impacts as key domains. ► A broad range of factors influence the effectiveness of HIAs

Using a lumped conceptual hydrological model for five different catchments in Sweden

OpenAIRE

Ekenberg, Madeleine

2016-01-01

Hydrological models offer powerful tools for understanding and predicting. In this thesis we havereviewed the advantages and disadvantages of physically based distributed hydrological models andconceptually lumped hydrological models. Based on that review, we went into depth and developed aMATLAB code to test if a simple conceptual lumped hydrological model, namely GR2M, wouldperform satisfactory for five different catchments in different parts of Sweden. The model had ratherunsatisfactory re...

Multi-Decadal Coastal Behavioural States From A Fusion Of Geohistorical Conceptual Modelling With 2-D Morphodynamic Modelling

Science.gov (United States)

Goodwin, I. D.; Mortlock, T.

2016-02-01

Geohistorical archives of shoreline and foredune planform geometry provides a unique evidence-based record of the time integral response to coupled directional wave climate and sediment supply variability on annual to multi-decadal time scales. We develop conceptual shoreline modelling from the geohistorical shoreline archive using a novel combination of methods, including: LIDAR DEM and field mapping of coastal geology; a decadal-scale climate reconstruction of sea-level pressure, marine windfields, and paleo-storm synoptic type and frequency, and historical bathymetry. The conceptual modelling allows for the discrimination of directional wave climate shifts and the relative contributions of cross-shore and along-shore sand supply rates at multi-decadal resolution. We present regional examples from south-eastern Australia over a large latitudinal gradient from subtropical Queensland (S 25°) to mid-latitude Bass Strait (S 40°) that illustrate the morphodynamic evolution and reorganization to wave climate change. We then use the conceptual modeling to inform a two-dimensional coupled spectral wave-hydrodynamic-morphodynamic model to investigate the shoreface response to paleo-directional wind and wave climates. Unlike one-line shoreline modelling, this fully dynamical approach allows for the investigation of cumulative and spatial bathymetric change due to wave-induced currents, as well as proxy-shoreline change. The fusion of the two modeling approaches allows for: (i) the identification of the natural range of coastal planform geometries in response to wave climate shifts; and, (ii) the decomposition of the multidecadal coastal change into the cross-shore and along-shore sand supply drivers, according to the best-matching planforms.

STRUCTURE OF MODELS FOR AGGREGATE ASSESSMENT OF FINANCIAL RISK COMMERCIAL BANKS

OpenAIRE

G. Kryshtal

2016-01-01

Conceptual approaches use a structural model for assessment of financial risk commercial banks, namely the risk measurement in combination: a comparison of its capital, calculated based on the standard approach of Basel II advanced approaches of Basel II and the structural model. Analysis of the application of the model in a economics crisis situation, such as the capital adequacy of the commercial banks. Deals with a unified approach to the choice of measure and its risk parameters to measur...

A Conceptual Model for Analysing Collaborative Work and Products in Groupware Systems

Science.gov (United States)

Duque, Rafael; Bravo, Crescencio; Ortega, Manuel

Collaborative work using groupware systems is a dynamic process in which many tasks, in different application domains, are carried out. Currently, one of the biggest challenges in the field of CSCW (Computer-Supported Cooperative Work) research is to establish conceptual models which allow for the analysis of collaborative activities and their resulting products. In this article, we propose an ontology that conceptualizes the required elements which enable an analysis to infer a set of analysis indicators, thus evaluating both the individual and group work and the artefacts which are produced.

Conceptualizing sustainable development. An assessment methodology connecting values, knowledge, worldviews and scenarios

International Nuclear Information System (INIS)

De Vries, Bert J.M.; Petersen, Arthur C.

2009-01-01

Sustainability science poses severe challenges to classical disciplinary science. To bring the perspectives of diverse disciplines together in a meaningful way, we describe a novel methodology for sustainability assessment of a particular social-ecological system, or country. Starting point is that a sustainability assessment should investigate the ability to continue and develop a desirable way of living vis-a-vis later generations and life elsewhere on the planet. Evidently, people hold different values and beliefs about the way societies sustain quality of life for their members. The first step, therefore, is to analyze people's value orientations and the way in which they interpret sustainability problems i.e. their beliefs. The next step is to translate the resulting worldviews into model-based narratives, i.e. scenarios. The qualitative and quantitative outcomes are then investigated in terms of associated risks and opportunities and robustness of policy options. The Netherlands Environmental Assessment Agency (PBL) has followed this methodology, using extensive surveys among the Dutch population. In its First Sustainability Outlook (2004), the resulting archetypical worldviews became the basis for four different scenarios for policy analysis, with emphases on the domains of transport, energy and food. The goal of the agency's Sustainability Outlooks is to show that choices are inevitable in policy making for sustainable development, to indicate which positive and negative impacts one can expect of these choices (trade-offs), and to identify options that may be robust under several worldviews. The conceptualization proposed here is both clear and applicable in practical sustainability assessments for policy making. (author)

Analysis of Economic Burden of Seasonal Influenza: An Actuarial Based Conceptual Model

Directory of Open Access Journals (Sweden)

S. S. N. Perera

2017-01-01

Full Text Available Analysing the economic burden of the seasonal influenza is highly essential due to the large number of outbreaks in recent years. Mathematical and actuarial models can be considered as management tools to understand the dynamical behavior, predict the risk, and compute it. This study is an attempt to develop conceptual model to investigate the economic burden due to seasonal influenza. The compartment SIS (susceptible-infected-susceptible model is used to capture the dynamical behavior of influenza. Considering the current investment and future medical care expenditure as premium payment and benefit (claim, respectively, the insurance and actuarial based conceptual model is proposed to model the present economic burden due to the spread of influenza. Simulation is carried out to demonstrate the variation of the present economic burden with respect to model parameters. The sensitivity of the present economic burden is studied with respect to the risk of disease spread. The basic reproduction is used to identify the risk of disease spread. Impact of the seasonality is studied by introducing the seasonally varying infection rate. The proposed model provides theoretical background to investigate the economic burden of seasonal influenza.

The Prince Edward Island Conceptual Model for Nursing: a nursing perspective of primary health care.

Science.gov (United States)

Munro, M; Gallant, M; MacKinnon, M; Dell, G; Herbert, R; MacNutt, G; McCarthy, M J; Murnaghan, D; Robertson, K

2000-06-01

The philosophy of primary health care (PHC) recognizes that health is a product of individual, social, economic, and political factors and that people have a right and a duty, individually and collectively, to participate in the course of their own health. The majority of nursing models cast the client in a dependent role and do not conceptualize health in a social, economic, and political context. The Prince Edward Island Conceptual Model for Nursing is congruent with the international move towards PHC. It guides the nurse in practising in the social and political environment in which nursing and health care take place. This model features a nurse/client partnership, the goal being to encourage clients to act on their own behalf. The conceptualization of the environment as the collective influence of the determinants of health gives both nurse and client a prominent position in the sociopolitical arena of health and health care.

Operation room tool handling and miscommunication scenarios: an object-process methodology conceptual model.

Science.gov (United States)

Wachs, Juan P; Frenkel, Boaz; Dori, Dov

2014-11-01

Errors in the delivery of medical care are the principal cause of inpatient mortality and morbidity, accounting for around 98,000 deaths in the United States of America (USA) annually. Ineffective team communication, especially in the operation room (OR), is a major root of these errors. This miscommunication can be reduced by analyzing and constructing a conceptual model of communication and miscommunication in the OR. We introduce the principles underlying Object-Process Methodology (OPM)-based modeling of the intricate interactions between the surgeon and the surgical technician while handling surgical instruments in the OR. This model is a software- and hardware-independent description of the agents engaged in communication events, their physical activities, and their interactions. The model enables assessing whether the task-related objectives of the surgical procedure were achieved and completed successfully and what errors can occur during the communication. The facts used to construct the model were gathered from observations of various types of operations miscommunications in the operating room and its outcomes. The model takes advantage of the compact ontology of OPM, which is comprised of stateful objects - things that exist physically or informatically, and processes - things that transform objects by creating them, consuming them or changing their state. The modeled communication modalities are verbal and non-verbal, and errors are modeled as processes that deviate from the "sunny day" scenario. Using OPM refinement mechanism of in-zooming, key processes are drilled into and elaborated, along with the objects that are required as agents or instruments, or objects that these processes transform. The model was developed through an iterative process of observation, modeling, group discussions, and simplification. The model faithfully represents the processes related to tool handling that take place in an OR during an operation. The specification is at

Power plant conceptual studies in Europe

International Nuclear Information System (INIS)

Maisonnier, D.; Campbell, D.; Cook, I.; Pace, L. Di; Giancarli, L.; Hayward, J.; Puma, A. Li; Medrano, M.; Norajitra, P.; Roccella, M.; Sardain, P.; Tran, M.Q.; Ward, D.

2007-01-01

The European fusion programme is 'reactor oriented' and it is aimed at the successive demonstration of the scientific, the technological and the economic feasibility of fusion power. The European Power Plant Conceptual Study (PPCS) has been a study of conceptual designs of five commercial fusion power plants and the main emphasis was on system integration. It focused on five power plant models which are illustrative of a wider spectrum of possibilities. They are all based on the tokamak concept and they have approximately the same net electrical power output, 1500 MWe. These span a range from relatively near-term, based on limited technology and plasma physics extrapolations, to an advanced conception. The PPCS allows one to clarify the concept of DEMO, the device that will bridge the gap between ITER and the first-of-a-kind fusion power plant. An assessment of the PPCS models with limited extrapolations highlighted a number of issues that must be addressed to establish the DEMO physics and technological basis

Spiritual AIM and the work of the chaplain: a model for assessing spiritual needs and outcomes in relationship.

Science.gov (United States)

Shields, Michele; Kestenbaum, Allison; Dunn, Laura B

2015-02-01

Distinguishing the unique contributions and roles of chaplains as members of healthcare teams requires the fundamental step of articulating and critically evaluating conceptual models that guide practice. However, there is a paucity of well-described spiritual assessment models. Even fewer of the extant models prescribe interventions and describe desired outcomes corresponding to spiritual assessments. This article describes the development, theoretical underpinnings, and key components of one model, called the Spiritual Assessment and Intervention Model (Spiritual AIM). Three cases are presented that illustrate Spiritual AIM in practice. Spiritual AIM was developed over the past 20 years to address the limitations of existing models. The model evolved based in part on observing how different people respond to a health crisis and what kinds of spiritual needs appear to emerge most prominently during a health crisis. Spiritual AIM provides a conceptual framework for the chaplain to diagnose an individual's primary unmet spiritual need, devise and implement a plan for addressing this need through embodiment/relationship, and articulate and evaluate the desired and actual outcome of the intervention. Spiritual AIM's multidisciplinary theory is consistent with the goals of professional chaplaincy training and practice, which emphasize the integration of theology, recognition of interpersonal dynamics, cultural humility and competence, ethics, and theories of human development. Further conceptual and empirical work is needed to systematically refine, evaluate, and disseminate well-articulated spiritual assessment models such as Spiritual AIM. This foundational work is vital to advancing chaplaincy as a theoretically grounded and empirically rigorous healthcare profession.

Conceptualising forensic science and forensic reconstruction. Part I: A conceptual model.

Science.gov (United States)

Morgan, R M

2017-11-01

There has been a call for forensic science to actively return to the approach of scientific endeavour. The importance of incorporating an awareness of the requirements of the law in its broadest sense, and embedding research into both practice and policy within forensic science, is arguably critical to achieving such an endeavour. This paper presents a conceptual model (FoRTE) that outlines the holistic nature of trace evidence in the 'endeavour' of forensic reconstruction. This model offers insights into the different components intrinsic to transparent, reproducible and robust reconstructions in forensic science. The importance of situating evidence within the whole forensic science process (from crime scene to court), of developing evidence bases to underpin each stage, of frameworks that offer insights to the interaction of different lines of evidence, and the role of expertise in decision making are presented and their interactions identified. It is argued that such a conceptual model has value in identifying the future steps for harnessing the value of trace evidence in forensic reconstruction. It also highlights that there is a need to develop a nuanced approach to reconstructions that incorporates both empirical evidence bases and expertise. A conceptual understanding has the potential to ensure that the endeavour of forensic reconstruction has its roots in 'problem-solving' science, and can offer transparency and clarity in the conclusions and inferences drawn from trace evidence, thereby enabling the value of trace evidence to be realised in investigations and the courts. Copyright © 2017 The Author. Published by Elsevier B.V. All rights reserved.

Introduction to the special section on mixture modeling in personality assessment.

Science.gov (United States)

Wright, Aidan G C; Hallquist, Michael N

2014-01-01

Latent variable models offer a conceptual and statistical framework for evaluating the underlying structure of psychological constructs, including personality and psychopathology. Complex structures that combine or compare categorical and dimensional latent variables can be accommodated using mixture modeling approaches, which provide a powerful framework for testing nuanced theories about psychological structure. This special series includes introductory primers on cross-sectional and longitudinal mixture modeling, in addition to empirical examples applying these techniques to real-world data collected in clinical settings. This group of articles is designed to introduce personality assessment scientists and practitioners to a general latent variable framework that we hope will stimulate new research and application of mixture models to the assessment of personality and its pathology.

A new pressure ulcer conceptual framework

Science.gov (United States)

Coleman, Susanne; Nixon, Jane; Keen, Justin; Wilson, Lyn; McGinnis, Elizabeth; Dealey, Carol; Stubbs, Nikki; Farrin, Amanda; Dowding, Dawn; Schols, Jos MGA; Cuddigan, Janet; Berlowitz, Dan; Jude, Edward; Vowden, Peter; Schoonhoven, Lisette; Bader, Dan L; Gefen, Amit; Oomens, Cees WJ; Nelson, E Andrea

2014-01-01

Aim This paper discusses the critical determinants of pressure ulcer development and proposes a new pressure ulcer conceptual framework. Background Recent work to develop and validate a new evidence-based pressure ulcer risk assessment framework was undertaken. This formed part of a Pressure UlceR Programme Of reSEarch (RP-PG-0407-10056), funded by the National Institute for Health Research. The foundation for the risk assessment component incorporated a systematic review and a consensus study that highlighted the need to propose a new conceptual framework. Design Discussion Paper. Data Sources The new conceptual framework links evidence from biomechanical, physiological and epidemiological evidence, through use of data from a systematic review (search conducted March 2010), a consensus study (conducted December 2010–2011) and an international expert group meeting (conducted December 2011). Implications for Nursing A new pressure ulcer conceptual framework incorporating key physiological and biomechanical components and their impact on internal strains, stresses and damage thresholds is proposed. Direct and key indirect causal factors suggested in a theoretical causal pathway are mapped to the physiological and biomechanical components of the framework. The new proposed conceptual framework provides the basis for understanding the critical determinants of pressure ulcer development and has the potential to influence risk assessment guidance and practice. It could also be used to underpin future research to explore the role of individual risk factors conceptually and operationally. Conclusion By integrating existing knowledge from epidemiological, physiological and biomechanical evidence, a theoretical causal pathway and new conceptual framework are proposed with potential implications for practice and research. PMID:24684197

A new pressure ulcer conceptual framework.

Science.gov (United States)

Coleman, Susanne; Nixon, Jane; Keen, Justin; Wilson, Lyn; McGinnis, Elizabeth; Dealey, Carol; Stubbs, Nikki; Farrin, Amanda; Dowding, Dawn; Schols, Jos M G A; Cuddigan, Janet; Berlowitz, Dan; Jude, Edward; Vowden, Peter; Schoonhoven, Lisette; Bader, Dan L; Gefen, Amit; Oomens, Cees W J; Nelson, E Andrea

2014-10-01

This paper discusses the critical determinants of pressure ulcer development and proposes a new pressure ulcer conceptual framework. Recent work to develop and validate a new evidence-based pressure ulcer risk assessment framework was undertaken. This formed part of a Pressure UlceR Programme Of reSEarch (RP-PG-0407-10056), funded by the National Institute for Health Research. The foundation for the risk assessment component incorporated a systematic review and a consensus study that highlighted the need to propose a new conceptual framework. Discussion Paper. The new conceptual framework links evidence from biomechanical, physiological and epidemiological evidence, through use of data from a systematic review (search conducted March 2010), a consensus study (conducted December 2010-2011) and an international expert group meeting (conducted December 2011). A new pressure ulcer conceptual framework incorporating key physiological and biomechanical components and their impact on internal strains, stresses and damage thresholds is proposed. Direct and key indirect causal factors suggested in a theoretical causal pathway are mapped to the physiological and biomechanical components of the framework. The new proposed conceptual framework provides the basis for understanding the critical determinants of pressure ulcer development and has the potential to influence risk assessment guidance and practice. It could also be used to underpin future research to explore the role of individual risk factors conceptually and operationally. By integrating existing knowledge from epidemiological, physiological and biomechanical evidence, a theoretical causal pathway and new conceptual framework are proposed with potential implications for practice and research. © 2014 The Authors. Journal of Advanced Nursing Published by John Wiley & Sons Ltd.

Developing Conceptual Models for Assessing Climate Change Impacts to Contaminant Availability in Terrestrial Ecosystems

Science.gov (United States)

2015-03-01

Greenberg 2005), effects of dredged material (PIANC 2006), and ecosystem restoration (Fischenich 2008) among others. The process of developing a conceptual...Impacts to Contaminant Availability in Terrestrial Ecosystems by Burton C. Suedel, Nathan R. Beane, Eric R. Britzke, Cheryl R. Montgomery, and...are generally project or problem specific. Building a CM includes determining the components of the ecosystem , identifying relationships linking these

Search for a New Conceptual Bookkeeping Model : Different Levels of Abstraction

NARCIS (Netherlands)

Sweere, A.M.J.; van Groenendaal, W.J.H.

1999-01-01

Nowadays, every bookkeeping system used in practice is automated. Most bookkeeping software and integrated information systems are based on databases. In this paper, we develop a new conceptual bookkeeping model which is not based on manual techniques, but which is applicable in a database

From Conceptual Frameworks to Mental Models for Astronomy: Students' Perceptions

Science.gov (United States)

Pundak, David; Liberman, Ido; Shacham, Miri

2017-01-01

Considerable debate exists among discipline-based astronomy education researchers about how students change their perceptions in science and astronomy. The study questioned the development of astronomical models among students in institutions of higher education by examining how college students change their initial conceptual frameworks and…

Adaptive Parameter Optimization of a Grid-based Conceptual Hydrological Model

Science.gov (United States)

Samaniego, L.; Kumar, R.; Attinger, S.

2007-12-01

Any spatially explicit hydrological model at the mesoscale is a conceptual approximation of the hydrological cycle and its dominant process occurring at this scale. Manual-expert calibration of this type of models may become quite tedious---if not impossible---taking into account the enormous amount of data required by these kind of models and the intrinsic uncertainty of both the data (input-output) and the model structure. Additionally, the model should be able to reproduce well several process which are accounted by a number of predefined objectives. As a consequence, some degree of automatic calibration would be required to find "good" solutions, each one constituting a trade-off among all calibration criteria. In other words, it is very likely that a number of parameter sets fulfil the optimization criteria and thus can be considered a model solution. In this study, we dealt with two research questions: 1) How to assess the adequate level of model complexity so that model overparameterization is avoided? And, 2) How to find a good solution with a relatively low computational burden? In the present study, a grid-based conceptual hydrological model denoted as HBV-UFZ based on some of the original HBV concepts was employed. This model was driven by 12~h precipitation, temperature, and PET grids which are acquired either from satellite products or from data of meteorological stations. In the latter case, the data was interpolated with external drift Kriging. The first research question was addressed in this study with the implementation of nonlinear transfer functions that regionalize most model parameters as a function of other spatially distributed observables such as land cover (time dependent) and other time independent basin characteristics such as soil type, slope, aspect, geological formations among others. The second question was addressed with an adaptive constrained optimization algorithm based on a parallel implementation of simulated annealing (SA

Conceptual framework for improved wind-related forest threat assessment in the Southeastern United States

Science.gov (United States)

Scott L. Goodrick; John A. Stanturf

2010-01-01

In the Southeastern United States, forests are subject to a variety of damage-causing wind phenomena that range in scale from very localized (downbursts and tornadoes) to broad spatial scales (hurricanes). Incorporating the threat of wind damage into forest management plans requires tools capable of assessing risk across this range of scales. Our conceptual approach...

300 kWt core conceptual model thermal/hydraulic characteristics

International Nuclear Information System (INIS)

Moody, E.

1971-01-01

The 300 kW(t), 199 element NASA-Lewis/AEC core conceptual model, has been analyzed to determine it's thermal-hydraulic characteristics using the GEOM-3 code. Stack-ups of tolerances and fuel rod asymmetry patterns were used to ascertain cross element Δ T's. Both zoned and uniform spacing were analyzed with a somewhat lower fuel temperature and cross element ΔT found for zoned spacing. With the models considered, the core design appears adequate to limit thermal gradients to approximately 32 0 F. Bypass flow should be controlled to prevent excessive edge element ΔT's. 11 references. (U.S.)

Research program to develop and validate conceptual models for flow and transport through unsaturated, fractured rock

International Nuclear Information System (INIS)

Glass, R.J.; Tidwell, V.C.

1991-01-01

As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical experimentation with conceptual model formulation and mathematical modeling. Our research is directed toward developing and validating macroscopic, continuum-based models and supporting effective property models because of their widespread utility within the context of this project. Success relative to the development and validation of effective property models is predicated on a firm understanding of the basic physics governing flow through fractured media, specifically in the areas of unsaturated flow and transport in a single fracture and fracture-matrix interaction. 43 refs

Research program to develop and validate conceptual models for flow and transport through unsaturated, fractured rock

International Nuclear Information System (INIS)

Glass, R.J.; Tidwell, V.C.

1991-09-01

As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical experimentation with conceptual model formulation and mathematical modeling. Our research is directed toward developing and validating macroscopic, continuum-based models and supporting effective property models because of their widespread utility within the context of this project. Success relative to the development and validation of effective property models is predicted on a firm understanding of the basic physics governing flow through fractured media, specifically in the areas of unsaturated flow and transport in a single fracture and fracture-matrix interaction

Research program to develop and validate conceptual models for flow and transport through unsaturated, fractured rock

International Nuclear Information System (INIS)

Glass, R.J.; Tidwell, V.C.

1991-01-01

As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical experimentation with conceptual model formulation and mathematical modeling. Our research is directed toward developing and validating macroscopic, continuum-based models and supporting effective property models because of their widespread utility within the context of this project. Success relative to the development and validation of effective property models is predicted on a firm understanding of the basic physics governing flow through fractured media, specifically in the areas of unsaturated flow and transport in a single fracture and fracture-matrix interaction

Examining the Etiology of Reading Disability as Conceptualized by the Hybrid Model

Science.gov (United States)

Erbeli, Florina; Hart, Sara A.; Wagner, Richard K.; Taylor, Jeanette

2018-01-01

A fairly recent definition of reading disability (RD) is that in the form of a hybrid model. The model views RD as a latent construct that is manifested through various observable unexpected impairments in reading-related skills and through inadequate response to intervention. The current report evaluated this new conceptualization of RD from an…

Conceptual data modeling on the KRR-1 and 2 decommissioning database

International Nuclear Information System (INIS)

Park, Hee Seoung; Park, Seung Kook; Lee, Kune Woo; Park, Jin Ho

2002-01-01

A study of the conceptual data modeling to realize the decommissioning database on the KRR-1 and 2 was carried out. In this study, the current state of the abroad decommissioning databased was investigated to make a reference of the database. A scope of the construction of decommissioning database has been set up based on user requirements. Then, a theory of the database construction was established and a scheme on the decommissioning information was classified. The facility information, work information, radioactive waste information, and radiological information dealing with the decommissioning database were extracted through interviews with an expert group and also decided upon the system configuration of the decommissioning database. A code which is composed of 17 bit was produced considering the construction, scheme and information. The results of the conceptual data modeling and the classification scheme will be used as basic data to create a prototype design of the decommissioning database

Religion and Spirituality’s Influences on HIV Syndemics Among MSM: A Systematic Review and Conceptual Model

Science.gov (United States)

Parsons, Jeffrey T.

2015-01-01

This paper presents a systematic review of the quantitative HIV research that assessed the relationships between religion, spirituality, HIV syndemics, and individual HIV syndemics-related health conditions (e.g. depression, substance abuse, HIV risk) among men who have sex with men (MSM) in the United States. No quantitative studies were found that assessed the relationships between HIV syndemics, religion, and spirituality. Nine studies, with 13 statistical analyses, were found that examined the relationships between individual HIV syndemics-related health conditions, religion, and spirituality. Among the 13 analyses, religion and spirituality were found to have mixed relationships with HIV syndemics-related health conditions (6 nonsignificant associations; 5 negative associations; 2 positive associations). Given the overall lack of inclusion of religion and spirituality in HIV syndemics research, a conceptual model that hypothesizes the potential interactions of religion and spirituality with HIV syndemics-related health conditions is presented. The implications of the model for MSM’s health are outlined. PMID:26319130

Green roof rainfall-runoff modelling: is the comparison between conceptual and physically based approaches relevant?

Science.gov (United States)

Versini, Pierre-Antoine; Tchiguirinskaia, Ioulia; Schertzer, Daniel

2017-04-01

Green roofs are commonly considered as efficient tools to mitigate urban runoff as they can store precipitation, and consequently provide retention and detention performances. Designed as a compromise between water holding capacity, weight and hydraulic conductivity, their substrate is usually an artificial media differentiating significantly from a traditional soil. In order to assess green roofs hydrological performances, many models have been developed. Classified into two categories (conceptual and physically based), they are usually applied to reproduce the discharge of a particular monitored green roof considered as homogeneous. Although the resulted simulations could be satisfactory, the question of robustness and consistency of the calibrated parameters is often not addressed. Here, a modeling framework has been developed to assess the efficiency and the robustness of both modelling approaches (conceptual and physically based) in reproducing green roof hydrological behaviour. SWMM and VS2DT models have been used for this purpose. This work also benefits from an experimental setup where several green roofs differentiated by their substrate thickness and vegetation cover are monitored. Based on the data collected for several rainfall events, it has been studied how the calibrated parameters are effectively linked to their physical properties and how they can vary from one green roof configuration to another. Although both models reproduce correctly the observed discharges in most of the cases, their calibrated parameters exhibit a high inconsistency. For a same green roof configuration, these parameters can vary significantly from one rainfall event to another, even if they are supposed to be linked to the green roof characteristics (roughness, residual moisture content for instance). They can also be different from one green roof configuration to another although the implemented substrate is the same. Finally, it appears very difficult to find any

Enhancing climate literacy through the use of an interdisciplinary global change framework and conceptual models

Science.gov (United States)

Bean, J. R.; Zoehfeld, K.; Mitchell, K.; Levine, J.; White, L. D.

2016-12-01

Understanding climate change and how to mitigate the causes and consequences of anthropogenic activities are essential components of the Next Generations Science Standards. To comprehend climate change today and why current rates and magnitudes of change are of concern, students must understand the various factors that drive Earth system processes and also how they interrelate. The Understanding Global Change web resource in development from the UC Museum of Paleontology will provide science educators with a conceptual framework, graphical models, lessons, and assessment templates for teaching NGSS aligned, interdisciplinary, climate change curricula. To facilitate students learning about the Earth as a dynamic, interacting system of ongoing processes, the Understanding Global Change site will provide explicit conceptual links for the causes of climate change (e.g., burning of fossil fuels, deforestation), Earth system processes (e.g., Earth's energy budget, water cycle), and the changes scientists measure in the Earth system (e.g., temperature, precipitation). The conceptual links among topics will be presented in a series of storyboards that visually represent relationships and feedbacks among components of the Earth system and will provide teachers with guides for implementing NGSS-aligned climate change instruction that addresses physical science, life sciences, Earth and space science, and engineering performance expectations. These visualization and instructional methods are used by teachers during professional development programs at UC Berkeley and the Smithsonian National Museum of Natural History and are being tested in San Francisco Bay Area classrooms.

MAPIT: A new software tool to assist in the transition from conceptual model to numerical simulation models

International Nuclear Information System (INIS)

Canales, T.W.; Grant, C.W.

1996-01-01

MapIt is a new software tool developed at Lawrence Livermore National Laboratory to assist ground water remediation professionals in generating numerical simulation models from a variety of physical and chemical data sources and the corresponding 1, 2, and 3 dimensional conceptual models that emerge from analysis of such data

Environmental context effects in conceptual explicit and implicit memory.

Science.gov (United States)

Parker, Andrew; Dagnall, Neil; Coyle, Anne-Marie

2007-05-01

Previous research has found environmental context effects for both conceptual explicit and conceptual implicit memory (Parker, Gellatly, & Waterman, 1999). The research presented here challenges these findings on methodological grounds. Experiment 1 assessed the effects of context change on category-exemplar generation (conceptual implicit memory test) and category-cued recall (conceptual explicit memory test). Experiment 2 assessed the effects of context change on word association (conceptual implicit memory test) and word associate cued recall (conceptual explicit memory test). In both experiments, study-test changes in environmental context were found to influence performance only on tests of explicit memory. It is concluded that when retrieval cues across explicit and implicit tests are matched, and the probability of explicit contamination is reduced, then only conceptual explicit test performance is reduced by study-test changes in environmental context.

Three-dimensional conceptual model for the Hanford Site unconfined aquifer system, FY 1993 status report

International Nuclear Information System (INIS)

Thorne, P.D.; Chamness, M.A.; Spane, F.A. Jr.; Vermeul, V.R.; Webber, W.D.

1993-12-01

The ground water underlying parts of the Hanford Site (Figure 1.1) contains radioactive and chemical contaminants at concentrations exceeding regulatory standards (Dresel et al. 1993). The Hanford Site Ground-Water Surveillance Project, operated by Pacific Northwest Laboratory (PNL), is responsible for monitoring the movement of these contaminants to ensure that public health and the environment are protected. To support the monitoring effort, a sitewide three-dimensional ground-water flow model is being developed. This report provides an update on the status of the conceptual model that will form the basis for constructing a numerical three-dimensional flow model for, the site. Thorne and Chamness (1992) provide additional information on the initial development of the three-dimensional conceptual model

Towards an Integrated Conceptual Model of International Student Adjustment and Adaptation

Science.gov (United States)

Schartner, Alina; Young, Tony Johnstone

2016-01-01

Despite a burgeoning body of empirical research on "the international student experience", the area remains under-theorized. The literature to date lacks a guiding conceptual model that captures the adjustment and adaptation trajectories of this unique, growing, and important sojourner group. In this paper, we therefore put forward a…

Engineering online and in-person social networks to sustain physical activity: application of a conceptual model.

Science.gov (United States)

Rovniak, Liza S; Sallis, James F; Kraschnewski, Jennifer L; Sciamanna, Christopher N; Kiser, Elizabeth J; Ray, Chester A; Chinchilli, Vernon M; Ding, Ding; Matthews, Stephen A; Bopp, Melissa; George, Daniel R; Hovell, Melbourne F

2013-08-14

High rates of physical inactivity compromise the health status of populations globally. Social networks have been shown to influence physical activity (PA), but little is known about how best to engineer social networks to sustain PA. To improve procedures for building networks that shape PA as a normative behavior, there is a need for more specific hypotheses about how social variables influence PA. There is also a need to integrate concepts from network science with ecological concepts that often guide the design of in-person and electronically-mediated interventions. Therefore, this paper: (1) proposes a conceptual model that integrates principles from network science and ecology across in-person and electronically-mediated intervention modes; and (2) illustrates the application of this model to the design and evaluation of a social network intervention for PA. A conceptual model for engineering social networks was developed based on a scoping literature review of modifiable social influences on PA. The model guided the design of a cluster randomized controlled trial in which 308 sedentary adults were randomly assigned to three groups: WalkLink+: prompted and provided feedback on participants' online and in-person social-network interactions to expand networks for PA, plus provided evidence-based online walking program and weekly walking tips; WalkLink: evidence-based online walking program and weekly tips only; Minimal Treatment Control: weekly tips only. The effects of these treatment conditions were assessed at baseline, post-program, and 6-month follow-up. The primary outcome was accelerometer-measured PA. Secondary outcomes included objectively-measured aerobic fitness, body mass index, waist circumference, blood pressure, and neighborhood walkability; and self-reported measures of the physical environment, social network environment, and social network interactions. The differential effects of the three treatment conditions on primary and secondary

Total and Conceptual Vocabulary in Spanish–English Bilinguals From 22 to 30 Months: Implications for Assessment

Science.gov (United States)

Core, Cynthia; Hoff, Erika; Rumiche, Rosario; Señor, Melissa

2015-01-01

Purpose Vocabulary assessment holds promise as a way to identify young bilingual children at risk for language delay. This study compares 2 measures of vocabulary in a group of young Spanish–English bilingual children to a single-language measure used with monolingual children. Method Total vocabulary and conceptual vocabulary were used to measure mean vocabulary size and growth in 47 Spanish–English bilingually developing children from 22 to 30 months of age based on results from the MacArthur–Bates Communicative Development Inventory (CDI; Fenson et al., 1993) and the Inventario del Desarrollo de Habilidades Comunicativas (Jackson-Maldonado et al., 2003). Bilingual children’s scores of total vocabulary and conceptual vocabulary were compared with CDI scores for a control group of 56 monolingual children. Results The total vocabulary measure resulted in mean vocabulary scores and average rate of growth similar to monolingual growth, whereas conceptual vocabulary scores were significantly smaller and grew at a slower rate than total vocabulary scores. Total vocabulary identified the same proportion of bilingual children below the 25th percentile on monolingual norms as the CDI did for monolingual children. Conclusion These results support the use of total vocabulary as a means of assessing early language development in young bilingual Spanish–English speaking children. PMID:24023382

A conceptual framework to assess effectiveness in wheelchair provision

Directory of Open Access Journals (Sweden)

Deepan C. Kamaraj

2017-09-01

Conclusion: We believe that adoption of this conceptual framework could have broad applications in wheelchair provision globally to develop evidence-based practices. Such a perspective will help in the comparison of different strategies employed in wheelchair provision and further improve clinical guidelines. Further work is being conducted to test the efficacy of this conceptual framework to evaluate effectiveness of wheelchair service provision in various settings across the globe.

Conceptualizing Pharmaceutical Plants

DEFF Research Database (Denmark)

Larsen, Bent Dalgaard; Jensen, Klaes Ladeby; Gjøl, Mikkel

2006-01-01

In the conceptual design phase of pharmaceutical plants as much as 80%-90% of the total cost of a project is committed. It is therefore essential that the chosen concept is viable. In this design process configuration and 3D models can help validate the decisions made. Designing 3D models...... is a complex task and requires skilled users. We demonstrate that a simple 2D/3D configuration tool can support conceptualizing of pharmaceutical plants. Present paper reports on preliminary results from a full scale implementation project at a Danish engineering company....

Conceptual basis of the master directed diagram

International Nuclear Information System (INIS)

Kelly, M.; Billington, D.

1998-01-01

This document forms part of a suite of documents describing the Nirex model development programme. The programme is designed to provide a clear audit trail from the identification of significant features, events and processes (FEPs) to the models and modelling processes employed within a detailed safety assessment. A five stage approach has been adopted, which provides a systematic framework for addressing uncertainty and for the documentation of all modelling decisions and assumptions. The five stages are as follows: Stage 1: EP analysis - compilation and structuring of a FEP database; Stage 2: Scenario and conceptual model development; Stage 3: mathematical model development; Stage 4: Software development; Stage 5: confidence building. This report describes the work involved in Stage 1 of the Nirex model development programme, FEP analysis. The aim of FEP analysis is to produce a set of FEPs and FEP interactions that form the basis for the scenario and conceptual model development in Stage 2. There are two requirements for the set of FEPs and FEP interactions; first, all aspects material to the performance of the disposal system should be covered, i.e. the set should be comprehensive, and secondly a clear audit trail of decisions, consensus and analysis should be maintained

Conceptual model for collision detection and avoidance for runway incursion prevention

Science.gov (United States)

Latimer, Bridgette A.

The Federal Aviation Administration (FAA), National Transportation and Safety Board (NTSB), National Aeronautics and Space Administration (NASA), numerous corporate entities, and research facilities have each come together to determine ways to make air travel safer and more efficient. These efforts have resulted in the development of a concept known as the Next Generation (Next Gen) of Aircraft or Next Gen. The Next Gen concept promises to be a clear departure from the way in which aircraft operations are performed today. The Next Gen initiatives require that modifications are made to the existing National Airspace System (NAS) concept of operations, system level requirements, software (SW) and hardware (HW) requirements, SW and HW designs and implementations. A second example of the changes in the NAS is the shift away from air traffic controllers having the responsibility for separation assurance. In the proposed new scheme of free flight, each aircraft would be responsible for assuring that it is safely separated from surrounding aircraft. Free flight would allow the separation minima for enroute aircraft to be reduced from 2000 nautical miles (nm) to 1000 nm. Simply put "Free Flight is a concept of air traffic management that permits pilots and controllers to share information and work together to manage air traffic from pre-flight through arrival without compromising safety [107]." The primary goal of this research project was to create a conceptual model that embodies the essential ingredients needed for a collision detection and avoidance system. This system was required to operate in two modes: air traffic controller's perspective and pilot's perspective. The secondary goal was to demonstrate that the technologies, procedures, and decision logic embedded in the conceptual model were able to effectively detect and avoid collision risks from both perspectives. Embodied in the conceptual model are five distinct software modules: Data Acquisition, State

A Conceptual Model for Teaching Critical Thinking in a Knowledge Economy

Science.gov (United States)

Chadwick, Clifton

2011-01-01

Critical thinking, viewed as rational and analytic thinking, is crucial for participation in a knowledge economy and society. This article provides a brief presentation of the importance of teaching critical thinking in a knowledge economy; suggests a conceptual model for teaching thinking; examines research on the historical role of teachers in…

The ISO Edi Conceptual Model Activity and Its Relationship to OSI.

Science.gov (United States)

Fincher, Judith A.

1990-01-01

The edi conceptual model is being developed to define common structures, services, and processes that syntax-specific standards like X12 and EDIFACT could adopt. Open Systems Interconnection (OSI) is of interest to edi because of its potential to help enable global interoperability across Electronic Data Interchange (EDI) functional groups. A…

A conceptual competitive intelligence quality assurance model

Directory of Open Access Journals (Sweden)

Tshilidzi Eric Nenzhelele

2015-12-01

Full Text Available Competitive Intelligence (CI improves the quality of product and service, decision-making and it improves quality of life. However, it has been established that decision makers are not happy about the quality of CI. This is because enterprises fail in quality assurance of CI. It has been concluded that most enterprises are clueless concerning CI quality assurance. Studies that previously attempted to resolve CI quality problem were limited in scope and focused too much on the quality of information than the overall CI quality. The purpose of this study is to propose a conceptual CI quality assurance model which will help in quality assurance of CI. The research was qualitative in nature and used content analysis.

Career and Technical Education (CTE) Student Success in Community Colleges: A Conceptual Model

Science.gov (United States)

Hirschy, Amy S.; Bremer, Christine D.; Castellano, Marisa

2011-01-01

Career and technical education (CTE) students pursuing occupational associate's degrees or certificates differ from students seeking academic majors at 2-year institutions in several ways. This article examines several theoretical models of student persistence and offers a conceptual model of student success focused on CTE students in community…

Uncertainties in soil-plant interactions in advanced models for long-timescale dose assessment

Energy Technology Data Exchange (ETDEWEB)

Klos, R. [Aleksandria Sciences Ltd. (United Kingdom); Limer, L. [Limer Scientific Ltd. (United Kingdom); Perez-Sanchez, D. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas - CIEMAT (Spain); Xu, S.; Andersson, P. [Swedish Radiation Safty Authority (Sweden)

2014-07-01

Traditional models for long-timescale dose assessment are generally conceptually straightforward, featuring one, two or three spatial compartments in the soil column and employing data based on annually averaged parameters for climate characteristics. The soil-plant system is usually modelled using concentration ratios. The justification for this approach is that the timescales relevant to the geologic disposal of radioactive waste are so long that simple conceptual models are necessary to account for the inherent uncertainties over the timescale of the dose assessment. In the past few years, attention has been given to more detailed 'advanced' models for use dose assessment that have a high degree of site-specific detail. These recognise more features, events and processes since they have higher spatial and temporal resolution. This modelling approach has been developed to account for redox sensitive radionuclides, variability of the water table position and accumulation in non-agricultural ecosystems prior to conversion to an agricultural ecosystem. The models feature higher spatial and temporal resolution in the soil column (up to ten layers with spatially varying k{sub d}s dependent on soil conditions) and monthly rather than annually averaged parameters. Soil-plant interaction is treated as a dynamic process, allowing for root uptake as a function of time and depth, according to the root profile. Uncertainty in dose assessment models associated with the treatment of prior accumulations in agricultural soils has demonstrated the importance of the model's representation of the soil-plant interaction. The treatment of root uptake as a dynamic process as opposed to a simple concentration ratio implies a potentially important difference despite the dynamic soil-plant transfer rate being based on established concentration ratio values. These discrepancies have also appeared in the results from the higher spatio-temporal resolution models. This paper

Conceptual design and assessment of in-service inspection and maintenance of KALIMER

Energy Technology Data Exchange (ETDEWEB)

Joo, Young Sang; Kim, Seok Hun; Kim, Jong Bum; Lee, Jae Han [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-05-01

In the conceptual design stage of KALIMER, the philosophy and methodology of in-service inspection (ISI) and maintenance for the reactor system and components are proposed and described. The ISI and maintenance should be carried out throughout plant life to ensure the structural integrity and safety of KALIMER. The conceptual design of ISI and maintenance are performed for considering the design characteristics of KALIMER and the intents of the ASME XI Division 3. This report describes and summarizes the requirements and available methods of ISI and maintenance. The visual inspection and continuous monitoring play a great role in the in-service inspection of KALIMER. The major structures of KALIMER reactor system are designed for maintenance free operation for the plant life time and the maintenance philosophy is to replace major components rather than repair them. The assessment of the ISI accessibility and maintainability is performed and reviewed each major component. The postulated failure defects for each component are estimated and evaluated for KALIMER safety and reliability. 8 refs., 16 figs., 13 tabs. (Author)

The Role of Computer Modeling in Enhancing Students' Conceptual Understanding of Physics

Directory of Open Access Journals (Sweden)

F. Ornek

2012-04-01

Full Text Available The purpose of this study was to investigate how the use of the computer simulations program VPython facilitated students’ conceptual understanding of fundamental physical principles and in constructing new knowledge of physics. We focused on students in a calculus-based introductory physics course, based on the Matter and Interactions curriculum of Chabay & Sherwood (2002 at a large state engineering and science university in the USA. A major emphasis of this course was on computer modeling by using VPython to write pro¬grams simulating physical systems. We conducted multiple student interviews, as well as an open-ended exit survey, to find out student views on how creating their own simulations to enhanced-conceptual understanding of physics and in constructing new knowledge of phys¬ics. The results varied in relation to the phases when the interviews were conducted. At the beginning of the course, students viewed the simulation program as a burden. However, dur¬ing the course, students stated that it promoted their knowledge and better conceptual understanding of physical phenomena. We deduce that VPython computer simulations can improve students’ conceptual understanding of fundamental physical concepts and promote construction of new knowledge in physics, once they overcome the initial learning curve associated with the VPython software package.

Impact of chronic Immune Thrombocytopenic Purpura (ITP on health-related quality of life: a conceptual model starting with the patient perspective

Directory of Open Access Journals (Sweden)

George James N

2008-02-01

Full Text Available Abstract Background Immune thrombocytopenic purpura (ITP, a condition characterized by autoimmune-mediated platelet destruction and suboptimal platelet production, is associated with symptoms such as bruising, epistaxis, menorrhagia, mucosal bleeding from the gastrointestinal and urinary tracts and, rarely central nervous system bleeding. The aim of this research is to develop a conceptual model to describe the impact of ITP and its treatment on patients' health-related quality of life (HRQoL. Methods A literature search and focus groups with adult ITP patients were conducted to identify areas of HRQoL affected by ITP. Published literature was reviewed to identify key HRQoL issues and existing questionnaires used to assess HRQoL. Focus group transcripts were reviewed, and common themes were extracted by grouping conceptual categories that described the impact on HRQoL. Results The literature synthesis and themes from the focus group data suggest that decreased platelet counts, disease symptoms, and treatment side effects influence multiple domains of HRQoL for ITP patients. Key areas affected by ITP and its treatments include emotional and functional health, work life, social and leisure activities, and reproductive health. Conclusion ITP affects various areas of HRQoL. This conceptual model will help inform the evaluation of therapeutic strategies for ITP.

A conceptual magnetic fabric development model for the Paks loess in Hungary

DEFF Research Database (Denmark)

Bradák, B.; Ujvari, Gabor; Seto, Y.

2018-01-01

We describe magnetic fabric and depositional environments of aeolian (loess) deposits from Paks, Hungary, and develop a novel, complex conceptual sedimentation model based on grain size and low-field magnetic susceptibility anisotropy data. A plot of shape factor (magnetic fabric parameter) and d...

Conceptual Model of IT Infrastructure Capability and Its Empirical Justification

Institute of Scientific and Technical Information of China (English)

QI Xianfeng; LAN Boxiong; GUO Zhenwei

2008-01-01

Increasing importance has been attached to the value of information technology (IT) infrastructure in today's organizations. The development of efficacious IT infrastructure capability enhances business performance and brings sustainable competitive advantage. This study analyzed the IT infrastructure capability in a holistic way and then presented a concept model of IT capability. IT infrastructure capability was categorized into sharing capability, service capability, and flexibility. This study then empirically tested the model using a set of survey data collected from 145 firms. Three factors emerge from the factor analysis as IT flexibility, IT service capability, and IT sharing capability, which agree with those in the conceptual model built in this study.

Assessment of a Hospital Palliative Care Unit (HPCU) for Cancer Patients; A Conceptual Framework.

Science.gov (United States)

Rouhollahi, Mohammad Reza; Saghafinia, Masoud; Zandehdel, Kazem; Motlagh, Ali Ghanbari; Kazemian, Ali; Mohagheghi, Mohammad Ali; Tahmasebi, Mamak

2015-01-01

The first hospital palliative care unit (HPCU) in Iran (FARS-HPCU) has been established in 2008 in the Cancer Institute, which is the largest referral cancer center in the country. We attempted to assess the performance of the HPCU based on a comprehensive conceptual framework. The main aim of this study was to develop a conceptual framework for assessment of the HPCU performances through designing a value chain in line with the goals and the main processes (core and support). We collected data from a variety of sources, including international guidelines, international best practices, and expert opinions in the country and compared them with national policies and priorities. We also took into consideration the trend of the HPCU development in the Cancer Institute of Iran. Through benchmarking the gap area with the performance standards, some recommendations for better outcome are proposed. The framework for performance assessment consisted of 154 process indicators (PIs), based on which the main stakeholders of the HPCU (including staff, patients, and families) offered their scoring. The outcome revealed the state of the processes as well as the gaps. Despite a significant improvement in many processes and indicators, more development in the comprehensive and integrative aspects of FARS-HPCU performance is required. Consideration of all supportive and palliative requirements of the patients through interdisciplinary and collaborative approaches is recommended.

Team awareness for workplace substance abuse prevention: the empirical and conceptual development of a training program.

Science.gov (United States)

Bennett, J B; Lehman, W E; Reynolds, G S

2000-09-01

This paper describes the empirical and theoretical development of a workplace training program to help reduce/prevent employee alcohol and drug abuse and enhance aspects of the work group environment that support ongoing prevention. The paper (1) examines the changing social context of the workplace (e.g., teamwork, privacy issues) as relevant for prevention, (2) reviews studies that assess risks and protective factors in employee substance abuse (work environment, group processes, and employee attitudes), (3) provides a conceptual model that focuses on work group processes (enabling, neutralization of deviance) as the locus of prevention efforts, (4) describes an enhanced team-oriented training that was derived from previous research and the conceptual model, and (5) describes potential applications of the program. It is suggested that the research and conceptual model may help prevention scientists to assess the organizational context of any workplace prevention strategy. The need for this team-oriented approach may be greater among employees who experience psychosocial risks such as workplace drinking climates, social alienation, and policies that emphasize deterrence (drug testing) over educative prevention. Limitations of the model are also discussed.

A conceptual model to facilitate amphibian conservation in the northern Great Plains

Science.gov (United States)

Mushnet, David M.; Euliss, Ned H.; Stockwell, Craig A.

2012-01-01

As pressures on agricultural landscapes to meet worldwide resource needs increase, amphibian populations face numerous threats including habitat destruction, chemical contaminants, disease outbreaks, wetland sedimentation, and synergistic effects of these perturbations. To facilitate conservation planning, we developed a conceptual model depicting elements critical for amphibian conservation in the northern Great Plains. First, we linked upland, wetland, and landscape features to specific ecological attributes. Ecological attributes included adult survival; reproduction and survival to metamorphosis; and successful dispersal and recolonization. Second, we linked ecosystem drivers, ecosystem stressors, and ecological effects of the region to each ecological attribute. Lastly, we summarized information on these ecological attributes and the drivers, stressors, and effects that work in concert to influence the maintenance of viable and genetically diverse amphibian populations in the northern Great Plains. While our focus was on the northern Great Plains, our conceptual model can be tailored to other geographic regions and taxa.

Conceptual Model of Weight Management in Overweight and Obese African-American Females.

Science.gov (United States)

Sutton, Suzanne M; Magwood, Gayenell S; Nemeth, Lynne S; Jenkins, Carolyn M

2017-04-01

Weight management of overweight and obese (OWO) African-American females (AAFs) is a poorly defined concept, leading to ineffective treatment of overweight and obesity, prevention of health sequelae, and risk reduction. A conceptual model of the phenomenon of weight management in OWO AAFs was developed through dimensional analysis of the literature. Constructs were identified and sorted into the dimensions of perspective, context, conditions, process, and consequences and integrated into an explanatory matrix. Through dimensional analysis, weight management in OWO AAFs was characterized as a multidimensional concept, defined from the perspective of weight loss in community-dwelling AAFs. Behaviors associated with weight management are strongly influenced by intrinsic factors and extrinsic conditions, which influence engagement in the processes and consequences of weight management. The resulting conceptual model of weight management in OWO AAFs provides a framework for research interventions applicable in a variety of settings. © 2016 Wiley Periodicals, Inc.

Conceptualization of Approaches and Thought Processes Emerging in Validating of Model in Mathematical Modeling in Technology Aided Environment

Science.gov (United States)

Hidiroglu, Çaglar Naci; Bukova Güzel, Esra

2013-01-01

The aim of the present study is to conceptualize the approaches displayed for validation of model and thought processes provided in mathematical modeling process performed in technology-aided learning environment. The participants of this grounded theory study were nineteen secondary school mathematics student teachers. The data gathered from the…

Conceptual Development af a 3D Product Configuration Model

DEFF Research Database (Denmark)

Skauge, Jørn

2006-01-01

in the development of IT-systems that support the procedures in companies and in the building industry. In other words, it is a knowledge-based system that helps companies in their daily work. The aim of the project has been to develop and examine conceptual ideas about 3D modelling configurator used in the company......’s production of steel fire sliding doors. The development of the 3D digital model is based on practical rather than theoretical research. The result of the research is a prototype digital 3D model to be presented live.......Paper. This project deals with 3D product configuration of a digital building element which has been developed as a prototype in cooperation between a product manufacturer and a research institution in Denmark. The project falls within the concept of product modelling which is more and more used...

The influence of conceptual model uncertainty on management decisions for a groundwater-dependent ecosystem in karst

DEFF Research Database (Denmark)

Gondwe, Bibi Ruth Neuman; Merediz-Alonso, Gonzalo; Bauer-Gottwein, Peter

2011-01-01

abstractions and pollution threatens the fresh water resource, and consequently the ecosystem integrity of both Sian Ka’an and the adjacent coastal environment. Seven different catchment-scale conceptual models were implemented in a distributed hydrological modelling approach. Equivalent porous medium...... to preserve water resources and maintain ecosystem services. Multiple Model Simulation highlights the impact of model structure uncertainty on management decisions using several plausible conceptual models. Multiple Model Simulation was used for this purpose on the Yucatan Peninsula, which is one of the world......Groundwater management in karst is often based on limited hydrologic understanding of the aquifer. The geologic heterogeneities controlling the water flow are often insufficiently mapped. As karst aquifers are very vulnerable to pollution, groundwater protection and land use management are crucial...

Conceptual framework for model-based analysis of residence time distribution in twin-screw granulation

DEFF Research Database (Denmark)

Kumar, Ashish; Vercruysse, Jurgen; Vanhoorne, Valerie

2015-01-01

Twin-screw granulation is a promising continuous alternative for traditional batchwise wet granulation processes. The twin-screw granulator (TSG) screws consist of transport and kneading element modules. Therefore, the granulation to a large extent is governed by the residence time distribution...... within each module where different granulation rate processes dominate over others. Currently, experimental data is used to determine the residence time distributions. In this study, a conceptual model based on classical chemical engineering methods is proposed to better understand and simulate...... the residence time distribution in a TSG. The experimental data were compared with the proposed most suitable conceptual model to estimate the parameters of the model and to analyse and predict the effects of changes in number of kneading discs and their stagger angle, screw speed and powder feed rate...

Precipitation-centered Conceptual Model for Sub-humid Uplands in Lampasas Cut Plains, TX

Science.gov (United States)

Potter, S. R.; Tu, M.; Wilcox, B. P.

2011-12-01

Conceptual understandings of dominant hydrological processes, system interactions and feedbacks, and external forcings operating within catchments often defy simple definition and explanation, especially catchments encompassing transition zones, degraded landscapes, rapid development, and where climate forcings exhibit large variations across time and space. However, it is precisely those areas for which understanding and knowledge are most needed to innovate sustainable management strategies and counter past management blunders and failed restoration efforts. The cut plain of central Texas is one such area. Complex geographic and climatic factors lead to spatially and temporally variable precipitation having frequent dry periods interrupted by intense high-volume precipitation. Fort Hood, an army post located in the southeast cut plain contains landscapes ranging from highly degraded to nearly pristine with a topography mainly comprised of flat-topped mesas separated by broad u-shaped valleys. To understand the hydrology of the area and responses to wet-dry cycles we analyzed 4-years of streamflow and rainfall from 8 catchments, sized between 1819 and 16,000 ha. Since aquifer recharge/discharge and surface stream-groundwater interactions are unimportant, we hypothesized a simple conceptual model driven by precipitation and radiative forcings and having stormflow, baseflow, ET, and two hypothetical storage components. The key storage component was conceptualized as a buffer that was highly integrated with the ET component and exerted controls on baseflow. Radiative energy controlled flux from the buffer to ET. We used the conceptual model in making a bimonthly hydrologic budget, which included buffer volumes and a deficit-surplus indicator. Through the analysis, we were led to speculate that buffer capacity plays key roles in these landscapes and even relatively minor changes in capacity, due to soil compaction for example, might lead to ecological shifts. The

Sediment carbon fate in phreatic karst (Part 1): Conceptual model development

Science.gov (United States)

Husic, A.; Fox, J.; Agouridis, C.; Currens, J.; Ford, W.; Taylor, C.

2017-06-01

Recent research has paid increased attention to quantifying the fate of carbon pools within fluvial networks, but few, if any, studies consider the fate of sediment organic carbon in fluviokarst systems despite that karst landscapes cover 12% of the earth's land surface. The authors develop a conceptual model of sediment carbon fate in karst terrain with specific emphasis upon phreatic karst conduits, i.e., those located below the groundwater table that have the potential to trap surface-derived sediment and turnover carbon. To assist with their conceptual model development, the authors study a phreatic system and apply a mixture of methods traditional and novel to karst studies, including electrical resistivity imaging, well drilling, instantaneous velocimetry, dye tracing, stage recording, discrete and continuous sediment and water quality sampling, and elemental and stable carbon isotope fingerprinting. Results show that the sediment transport carrying capacity of the phreatic karst water is orders of magnitude less than surface streams during storm-activated periods promoting deposition of fine sediments in the phreatic karst. However, the sediment transport carrying capacity is sustained long after the hydrologic event has ended leading to sediment resuspension and prolonged transport. The surficial fine grained laminae occurs in the subsurface karst system; but unlike surface streams, the light-limited conditions of the subsurface karst promotes constant heterotrophy leading to carbon turnover. The coupling of the hydrological processes leads to a conceptual model that frames phreatic karst as a biologically active conveyor of sediment carbon that recharges degraded organic carbon back to surface streams. For example, fluvial sediment is estimated to lose 30% of its organic carbon by mass during a one year temporary residence within the phreatic karst. It is recommended that scientists consider karst pathways when attempting to estimate organic matter stocks

Simulation of shallow groundwater levels: Comparison of a data-driven and a conceptual model

Science.gov (United States)

Fahle, Marcus; Dietrich, Ottfried; Lischeid, Gunnar

2015-04-01

Despite an abundance of models aimed at simulating shallow groundwater levels, application of such models is often hampered by a lack of appropriate input data. Difficulties especially arise with regard to soil data, which are typically hard to obtain and prone to spatial variability, eventually leading to uncertainties in the model results. Modelling approaches relying entirely on easily measured quantities are therefore an alternative to encourage the applicability of models. We present and compare two models for calculating 1-day-ahead predictions of the groundwater level that are only based on measurements of potential evapotranspiration, precipitation and groundwater levels. The first model is a newly developed conceptual model that is parametrized using the White method (which estimates the actual evapotranspiration on basis of diurnal groundwater fluctuations) and a rainfall-response ratio. Inverted versions of the two latter approaches are then used to calculate the predictions of the groundwater level. Furthermore, as a completely data-driven alternative, a simple feed-forward multilayer perceptron neural network was trained based on the same inputs and outputs. Data of 4 growing periods (April to October) from a study site situated in the Spreewald wetland in North-east Germany were taken to set-up the models and compare their performance. In addition, response surfaces that relate model outputs to combinations of different input variables are used to reveal those aspects in which the two approaches coincide and those in which they differ. Finally, it will be evaluated whether the conceptual approach can be enhanced by extracting knowledge of the neural network. This is done by replacing in the conceptual model the default function that relates groundwater recharge and groundwater level, which is assumed to be linear, by the non-linear function extracted from the neural network.