WorldWideScience

Sample records for concave outlines target-dose

  1. Optimization of radiotherapy to target volumes with concave outlines: target-dose homogenization and selective sparing of critical structures by constrained matrix inversion

    Energy Technology Data Exchange (ETDEWEB)

    Colle, C; Van den Berge, D; De Wagter, C; Fortan, L; Van Duyse, B; De Neve, W

    1995-12-01

    The design of 3D-conformal dose distributions for targets with concave outlines is a technical challenge in conformal radiotherapy. For these targets, it is impossible to find beam incidences for which the target volume can be isolated from the tissues at risk. Commonly occurring examples are most thyroid cancers and the targets located at the lower neck and upper mediastinal levels related to some head and neck. A solution to this problem was developed, using beam intensity modulation executed with a multileaf collimator by applying a static beam-segmentation technique. The method includes the definition of beam incidences and beam segments of specific shape as well as the calculation of segment weights. Tests on Sherouse`s GRATISTM planning system allowed to escalate the dose to these targets to 65-70 Gy without exceeding spinal cord tolerance. Further optimization by constrained matrix inversion was investigated to explore the possibility of further dose escalation.

  2. Irradiation of target volumes with concave outlines

    International Nuclear Information System (INIS)

    De Neve, W.; Fortan, L.; Derycke, S.; Van Duyse, B.; DE Wagter, C.

    1995-01-01

    A heuristic planning procedure allowing to obtain a 3-dimensional conformal dose distribution for target volumes with concavities has been investigated. The procedure divides the planning problem into a number of sub-problems each solvable by known methods. By patching together the solutions to the sub-problems, a solution with a predictable dosimetric outcome can be obtained. The procedure can be applied to most 3-dimensional systems. The procedure is described and its applications to the irradiation of neoplasms are discussed. (A.S.)

  3. Irradiation of target volumes with concave outlines

    Energy Technology Data Exchange (ETDEWEB)

    De Neve, W; Fortan, L; Derycke, S; Van Duyse, B; DE Wagter, C [Ghent Rijksuniversiteit (Belgium). Kliniek voor Radiotherapie en Kerngeneeskunde

    1995-12-01

    A heuristic planning procedure allowing to obtain a 3-dimensional conformal dose distribution for target volumes with concavities has been investigated. The procedure divides the planning problem into a number of sub-problems each solvable by known methods. By patching together the solutions to the sub-problems, a solution with a predictable dosimetric outcome can be obtained. The procedure can be applied to most 3-dimensional systems. The procedure is described and its applications to the irradiation of neoplasms are discussed. (A.S.).

  4. An analytic solution for calculating the beam intensity profiles useful to irradiate target volumes with bi-concave outlines

    Energy Technology Data Exchange (ETDEWEB)

    De Neve, W; Derycke, S; De Wagter, C [Ghent Rijksuniversiteit (Belgium). Kliniek voor Radiotherapie en Kerngeneeskunde

    1995-12-01

    A heuristic planing procedure allowing to obtain a 3-dimensional conformal dose distribution in radiotherapy for target volumes with a bi-concave or multi-concave shape has been developed. The described method is tested on a phantom simulating a pelvic target, described by Brahme.

  5. Outline

    Indian Academy of Sciences (India)

    First page Back Continue Last page Graphics. Outline. Cotton trends in India. The need for Bollgard cotton. Evaluation & approval. Safety; Field evaluation. Key statistics. Input Costs, Pesticide spend, Profit per acre; Area, Production, Productivity, etc. Value generated. 2005; 2006 Estimates. Summary.

  6. Concavity Theorems for Energy Surfaces

    OpenAIRE

    Giraud, B. G.; Karataglidis, S.

    2011-01-01

    Concavity properties prevent the existence of significant landscapes in energy surfaces obtained by strict constrained energy minimizations. The inherent contradiction is due to fluctuations of collective coordinates. A solution to those fluctuations is given.

  7. Inhomogeneous target-dose distributions: a dimension more for optimization?

    International Nuclear Information System (INIS)

    Gersem, Werner R.T. de; Derycke, Sylvie; Colle, Christophe O.; Wagter, Carlos de; Neve, Wilfried J. de

    1999-01-01

    Purpose: To evaluate if the use of inhomogeneous target-dose distributions, obtained by 3D conformal radiotherapy plans with or without beam intensity modulation, offers the possibility to decrease indices of toxicity to normal tissues and/or increase indices of tumor control stage III non-small cell lung cancer (NSCLC). Methods and Materials: Ten patients with stage III NSCLC were planned using a conventional 3D technique and a technique involving noncoplanar beam intensity modulation (BIM). Two planning target volumes (PTVs) were defined: PTV1 included macroscopic tumor volume and PTV2 included macroscopic and microscopic tumor volume. Virtual simulation defined the beam shapes and incidences as well as the wedge orientations (3D) and segment outlines (BIM). Weights of wedged beams, unwedged beams, and segments were determined by optimization using an objective function with a biological and a physical component. The biological component included tumor control probability (TCP) for PTV1 (TCP1), PTV2 (TCP2), and normal tissue complication probability (NTCP) for lung, spinal cord, and heart. The physical component included the maximum and minimum dose as well as the standard deviation of the dose at PTV1. The most inhomogeneous target-dose distributions were obtained by using only the biological component of the objective function (biological optimization). By enabling the physical component in addition to the biological component, PTV1 inhomogeneity was reduced (biophysical optimization). As indices for toxicity to normal tissues, NTCP-values as well as maximum doses or dose levels to relevant fractions of the organ's volume were used. As indices for tumor control, TCP-values as well as minimum doses to the PTVs were used. Results: When optimization was performed with the biophysical as compared to the biological objective function, the PTV1 inhomogeneity decreased from 13 (8-23)% to 4 (2-9)% for the 3D-(p = 0.00009) and from 44 (33-56)% to 20 (9-34)% for the BIM

  8. Cylindrical concave body of composite fibrous material

    International Nuclear Information System (INIS)

    1979-01-01

    The invention is concerned with a cylindrical concave body of compound fibrous material which is intended to be exposed to high rotation speeds around its own longitudinal axis. The concave body in question has at least one layer of fibrils that are interwoven and enclose an identical angle with the longitudinal axis of the concave body in both directions. The concave body in question also has at least a second layer of fibrils that run in the direction of the circumference and are fitted radially to the outside. The cylindrical concave body of the invention is particularly well suited for application as a rotor tube in a gas ultra-centrifuge

  9. Neural Network to Solve Concave Games

    OpenAIRE

    Liu, Zixin; Wang, Nengfa

    2014-01-01

    The issue on neural network method to solve concave games is concerned. Combined with variational inequality, Ky Fan inequality, and projection equation, concave games are transformed into a neural network model. On the basis of the Lyapunov stable theory, some stability results are also given. Finally, two classic games’ simulation results are given to illustrate the theoretical results.

  10. ON THE GENERALIZED CONVEXITY AND CONCAVITY

    Directory of Open Access Journals (Sweden)

    Bhayo B.

    2015-11-01

    Full Text Available A function ƒ : R+ → R+ is (m1, m2-convex (concave if ƒ(m1(x,y ≤ (≥ m2(ƒ(x, ƒ(y for all x,y Є R+ = (0,∞ and m1 and m2 are two mean functions. Anderson et al. [1] studies the dependence of (m1, m2-convexity (concavity on m1 and m2 and gave the sufficient conditions of (m1, m2-convexity and concavity of a function defined by Maclaurin series. In this paper, we make a contribution to the topic and study the (m1, m2-convexity and concavity of a function where m1 and m2 are identric mean, Alzer mean mean. As well, we prove a conjecture posed by Bruce Ebanks in [2].

  11. Optimization of bridge cables with concave fillets

    DEFF Research Database (Denmark)

    Burlina, Celeste; Georgakis, Christos T.; Larsen, Søren V.

    In this paper the aerodynamic performance of new cable surfaces with concave fillet are examined and compared to plain, dimpled and helically filleted surfaces. To this end, an extensive wind-tunnel campaign was undertaken. Preliminary flow visualizations tests and static tests were performed to ...

  12. Alpha-Concave Hull, a Generalization of Convex Hull

    OpenAIRE

    Asaeedi, Saeed; Didehvar, Farzad; Mohades, Ali

    2013-01-01

    Bounding hull, such as convex hull, concave hull, alpha shapes etc. has vast applications in different areas especially in computational geometry. Alpha shape and concave hull are generalizations of convex hull. Unlike the convex hull, they construct non-convex enclosure on a set of points. In this paper, we introduce another generalization of convex hull, named alpha-concave hull, and compare this concept with convex hull and alpha shape. We show that the alpha-concave hull is also a general...

  13. Optimal Portfolio Selection Under Concave Price Impact

    International Nuclear Information System (INIS)

    Ma Jin; Song Qingshuo; Xu Jing; Zhang Jianfeng

    2013-01-01

    In this paper we study an optimal portfolio selection problem under instantaneous price impact. Based on some empirical analysis in the literature, we model such impact as a concave function of the trading size when the trading size is small. The price impact can be thought of as either a liquidity cost or a transaction cost, but the concavity nature of the cost leads to some fundamental difference from those in the existing literature. We show that the problem can be reduced to an impulse control problem, but without fixed cost, and that the value function is a viscosity solution to a special type of Quasi-Variational Inequality (QVI). We also prove directly (without using the solution to the QVI) that the optimal strategy exists and more importantly, despite the absence of a fixed cost, it is still in a “piecewise constant” form, reflecting a more practical perspective.

  14. Optimal Portfolio Selection Under Concave Price Impact

    Energy Technology Data Exchange (ETDEWEB)

    Ma Jin, E-mail: jinma@usc.edu [University of Southern California, Department of Mathematics (United States); Song Qingshuo, E-mail: songe.qingshuo@cityu.edu.hk [City University of Hong Kong, Department of Mathematics (Hong Kong); Xu Jing, E-mail: xujing8023@yahoo.com.cn [Chongqing University, School of Economics and Business Administration (China); Zhang Jianfeng, E-mail: jianfenz@usc.edu [University of Southern California, Department of Mathematics (United States)

    2013-06-15

    In this paper we study an optimal portfolio selection problem under instantaneous price impact. Based on some empirical analysis in the literature, we model such impact as a concave function of the trading size when the trading size is small. The price impact can be thought of as either a liquidity cost or a transaction cost, but the concavity nature of the cost leads to some fundamental difference from those in the existing literature. We show that the problem can be reduced to an impulse control problem, but without fixed cost, and that the value function is a viscosity solution to a special type of Quasi-Variational Inequality (QVI). We also prove directly (without using the solution to the QVI) that the optimal strategy exists and more importantly, despite the absence of a fixed cost, it is still in a 'piecewise constant' form, reflecting a more practical perspective.

  15. Fast approximate convex decomposition using relative concavity

    KAUST Repository

    Ghosh, Mukulika; Amato, Nancy M.; Lu, Yanyan; Lien, Jyh-Ming

    2013-01-01

    Approximate convex decomposition (ACD) is a technique that partitions an input object into approximately convex components. Decomposition into approximately convex pieces is both more efficient to compute than exact convex decomposition and can also generate a more manageable number of components. It can be used as a basis of divide-and-conquer algorithms for applications such as collision detection, skeleton extraction and mesh generation. In this paper, we propose a new method called Fast Approximate Convex Decomposition (FACD) that improves the quality of the decomposition and reduces the cost of computing it for both 2D and 3D models. In particular, we propose a new strategy for evaluating potential cuts that aims to reduce the relative concavity, rather than absolute concavity. As shown in our results, this leads to more natural and smaller decompositions that include components for small but important features such as toes or fingers while not decomposing larger components, such as the torso, that may have concavities due to surface texture. Second, instead of decomposing a component into two pieces at each step, as in the original ACD, we propose a new strategy that uses a dynamic programming approach to select a set of n c non-crossing (independent) cuts that can be simultaneously applied to decompose the component into n c+1 components. This reduces the depth of recursion and, together with a more efficient method for computing the concavity measure, leads to significant gains in efficiency. We provide comparative results for 2D and 3D models illustrating the improvements obtained by FACD over ACD and we compare with the segmentation methods in the Princeton Shape Benchmark by Chen et al. (2009) [31]. © 2012 Elsevier Ltd. All rights reserved.

  16. Local matching indicators for concave transport costs

    OpenAIRE

    Delon , Julie; Salomon , Julien; Sobolevskii , A.

    2010-01-01

    International audience; In this note, we introduce a class of indicators that enable to compute efficiently optimal transport plans associated to arbitrary distributions of $N$ demands and $N$ supplies in $\\mathbf{R}$ in the case where the cost function is concave. The computational cost of these indicators is small and independent of $N$. A hierarchical use of them enables to obtain an efficient algorithm.

  17. Sharing a common resource with concave benefits

    OpenAIRE

    Ambec, S.

    2006-01-01

    A group of agents enjoy concave and single-peak benefit functions from consuming a shared resource. They also value money (transfers). The resource is scarce in the sense that not everybody can consume its peak. The paper characterizes the unique (resource and money) allocation that is efficient, incentive compatible and equal-sharing individual rational. It can be implemented (i) by selling the resource or taxing extraction and redistributing the money collected equally, or (ii) by assigning...

  18. Log-Concavity Properties of Minkowski Valuations

    OpenAIRE

    Berg, Astrid; Parapatits, Lukas; Schuster, Franz E.; Weberndorfer, Manuel

    2014-01-01

    New Orlicz Brunn-Minkowski inequalities are established for rigid motion compatible Minkowski valuations of arbitrary degree. These extend classical log-concavity properties of intrinsic volumes and generalize seminal results of Lutwak and others. Two different approaches which refine previously employed techniques are explored. It is shown that both lead to the same class of Minkowski valuations for which these inequalities hold. An appendix by Semyon Alesker contains the proof of a new clas...

  19. Fast approximate convex decomposition using relative concavity

    KAUST Repository

    Ghosh, Mukulika

    2013-02-01

    Approximate convex decomposition (ACD) is a technique that partitions an input object into approximately convex components. Decomposition into approximately convex pieces is both more efficient to compute than exact convex decomposition and can also generate a more manageable number of components. It can be used as a basis of divide-and-conquer algorithms for applications such as collision detection, skeleton extraction and mesh generation. In this paper, we propose a new method called Fast Approximate Convex Decomposition (FACD) that improves the quality of the decomposition and reduces the cost of computing it for both 2D and 3D models. In particular, we propose a new strategy for evaluating potential cuts that aims to reduce the relative concavity, rather than absolute concavity. As shown in our results, this leads to more natural and smaller decompositions that include components for small but important features such as toes or fingers while not decomposing larger components, such as the torso, that may have concavities due to surface texture. Second, instead of decomposing a component into two pieces at each step, as in the original ACD, we propose a new strategy that uses a dynamic programming approach to select a set of n c non-crossing (independent) cuts that can be simultaneously applied to decompose the component into n c+1 components. This reduces the depth of recursion and, together with a more efficient method for computing the concavity measure, leads to significant gains in efficiency. We provide comparative results for 2D and 3D models illustrating the improvements obtained by FACD over ACD and we compare with the segmentation methods in the Princeton Shape Benchmark by Chen et al. (2009) [31]. © 2012 Elsevier Ltd. All rights reserved.

  20. The concave iris in pigment dispersion syndrome.

    Science.gov (United States)

    Liu, Lance; Ong, Ee Lin; Crowston, Jonathan

    2011-01-01

    To visualize the changes of the iris contour in patients with pigment dispersion syndrome after blinking, accommodation, and pharmacologic miosis using anterior segment optical coherence tomography. Observational case series. A total of 33 eyes of 20 patients with pigment dispersion syndrome. Each eye was imaged along the horizontal 0- to 180-degree meridian using the Visante Anterior Segment Imaging System (Carl Zeiss Meditec, Dublin, CA). Scans were performed at baseline and after focusing on an internal fixation target for 5 minutes, forced blinking, accommodation, and pharmacologic miosis with pilocarpine 2%. Quantitative analysis of the changes in the iris configuration. After 5 minutes of continual fixation, the iris became planar with the mean ± standard deviation curvature decreasing from 214 ± 74 μm to 67 ± 76 μm (P pigment dispersion syndrome after forced blinking, but the iris concavity recovered to 227 ± 113 μm (P = 0.34) and 238 ± 119 μm (P = 0.19) with the -3.0 and -6.0 diopter lenses, respectively. Pilocarpine-induced miosis caused the iris to assume a planar configuration in all subjects. This study shows that the iris in pigment dispersion syndrome assumes a planar configuration when fixating and that the concavity of the iris surface is not restored by blinking. Accommodation restored the iris concavity, suggesting that the posterior curvature of the iris in pigment dispersion syndrome is induced and probably maintained, at least in part, by accommodation. Copyright © 2011 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

  1. Convex and Radially Concave Contoured Distributions

    Directory of Open Access Journals (Sweden)

    Wolf-Dieter Richter

    2015-01-01

    Full Text Available Integral representations of the locally defined star-generalized surface content measures on star spheres are derived for boundary spheres of balls being convex or radially concave with respect to a fan in Rn. As a result, the general geometric measure representation of star-shaped probability distributions and the general stochastic representation of the corresponding random vectors allow additional specific interpretations in the two mentioned cases. Applications to estimating and testing hypotheses on scaling parameters are presented, and two-dimensional sample clouds are simulated.

  2. Sensitive visual test for concave diffraction gratings.

    Science.gov (United States)

    Bruner, E. C., Jr.

    1972-01-01

    A simple visual test for the evaluation of concave diffraction gratings is described. It is twice as sensitive as the Foucault knife edge test, from which it is derived, and has the advantage that the images are straight and free of astigmatism. It is particularly useful for grating with high ruling frequency where the above image faults limit the utility of the Foucault test. The test can be interpreted quantitatively and can detect zonal grating space errors of as little as 0.1 A.

  3. Experimental analysis of an MIM capacitor with a concave shield

    International Nuclear Information System (INIS)

    Liu Lintao; Yu Mingyan; Wang Jinxiang

    2009-01-01

    A novel shielding scheme is developed by inserting a concave shield between a metal-insulator-metal (MIM) capacitor and the silicon substrate. Chip measurements reveal that the concave shield improves the quality factor by 11% at 11.8 GHz and 14% at 18.8 GHz compared with an unshielded MIM capacitor. It also alleviates the effect on shunt capacitance between the bottom plate of the MIM capacitor and the shield layer. Moreover, because the concave shields simplify substrate modeling, a simple circuit model of the MIM capacitor with concave shield is presented for radio frequency applications.

  4. Travel Agent Course Outline.

    Science.gov (United States)

    British Columbia Dept. of Education, Victoria.

    Written for college entry-level travel agent training courses, this course outline can also be used for inservice training programs offered by travel agencies. The outline provides information on the work of a travel agent and gives clear statements on what learners must be able to do by the end of their training. Material is divided into eight…

  5. Log-concavity property for some well-known distributions

    Directory of Open Access Journals (Sweden)

    G. R. Mohtashami Borzadaran

    2011-12-01

    Full Text Available Interesting properties and propositions, in many branches of science such as economics have been obtained according to the property of cumulative distribution function of a random variable as a concave function. Caplin and Nalebuff (1988,1989, Bagnoli and Khanna (1989 and Bagnoli and Bergstrom (1989 , 1989, 2005 have discussed the log-concavity property of probability distributions and their applications, especially in economics. Log-concavity concerns twice differentiable real-valued function g whose domain is an interval on extended real line. g as a function is said to be log-concave on the interval (a,b if the function ln(g is a concave function on (a,b. Log-concavity of g on (a,b is equivalent to g'/g being monotone decreasing on (a,b or (ln(g" 6] have obtained log-concavity for distributions such as normal, logistic, extreme-value, exponential, Laplace, Weibull, power function, uniform, gamma, beta, Pareto, log-normal, Student's t, Cauchy and F distributions. We have discussed and introduced the continuous versions of the Pearson family, also found the log-concavity for this family in general cases, and then obtained the log-concavity property for each distribution that is a member of Pearson family. For the Burr family these cases have been calculated, even for each distribution that belongs to Burr family. Also, log-concavity results for distributions such as generalized gamma distributions, Feller-Pareto distributions, generalized Inverse Gaussian distributions and generalized Log-normal distributions have been obtained.

  6. IAEA TECDOC 055 Outline

    Energy Technology Data Exchange (ETDEWEB)

    Shull, Doug [Gregg Protection Services, Palm Beach Gardens, FL (United States)

    2015-07-13

    An outline of suggestions for updating a version of IAEA-TECDOC-1276 is provided. This update will become IAEA-TECDOC-055, titled ''IAEA handbook for designing and implementing physical protection systems for nuclear material and nuclear facilities.''

  7. An outline of ANPA

    International Nuclear Information System (INIS)

    Del Nero, G.

    1997-01-01

    The activities of the Italian National Agency for Environmental Protection(ANPA) is outlined including the following: the institutive law of ANPA; main tasks of ANPA; structure of ANPA; personnel of ANPA; provisional structure of ANPA; principal nuclear sites in Italy

  8. Generalized concavity in fuzzy optimization and decision analysis

    CERN Document Server

    Ramík, Jaroslav

    2002-01-01

    Convexity of sets in linear spaces, and concavity and convexity of functions, lie at the root of beautiful theoretical results that are at the same time extremely useful in the analysis and solution of optimization problems, including problems of either single objective or multiple objectives. Not all of these results rely necessarily on convexity and concavity; some of the results can guarantee that each local optimum is also a global optimum, giving these methods broader application to a wider class of problems. Hence, the focus of the first part of the book is concerned with several types of generalized convex sets and generalized concave functions. In addition to their applicability to nonconvex optimization, these convex sets and generalized concave functions are used in the book's second part, where decision-making and optimization problems under uncertainty are investigated. Uncertainty in the problem data often cannot be avoided when dealing with practical problems. Errors occur in real-world data for...

  9. Log-concave Probability Distributions: Theory and Statistical Testing

    DEFF Research Database (Denmark)

    An, Mark Yuing

    1996-01-01

    This paper studies the broad class of log-concave probability distributions that arise in economics of uncertainty and information. For univariate, continuous, and log-concave random variables we prove useful properties without imposing the differentiability of density functions. Discrete...... and multivariate distributions are also discussed. We propose simple non-parametric testing procedures for log-concavity. The test statistics are constructed to test one of the two implicati ons of log-concavity: increasing hazard rates and new-is-better-than-used (NBU) property. The test for increasing hazard...... rates are based on normalized spacing of the sample order statistics. The tests for NBU property fall into the category of Hoeffding's U-statistics...

  10. Classroom Note: Concavity and the Second Law of Thermodynamics

    Science.gov (United States)

    Dunning-Davies, J.

    2003-01-01

    The importance of the mathematical notion of concavity in relation to thermodynamics is stressed and it is shown how it can be useful in increasing the enthusiasm of physics' students for their mathematics' courses.

  11. Concave microwell plate facilitates chondrogenesis from mesenchymal stem cells.

    Science.gov (United States)

    Ko, Ji-Yun; Im, Gun-Il

    2016-11-01

    To compare in vitro chondrogenesis from bone marrow-derived mesenchymal stem cells using concave microwell plates with those obtained using culture tubes. Pellets cultured in concave microwell plates had a significantly higher level of GAG per DNA content and greater proteoglycan content than those cultured in tubes at day 7 and 14. Three chondrogenic markers, SOX-9, COL2A1 and aggrecan, showed significantly higher expression in pellets cultured in concave microwell plates than those cultured in tubes at day 7 and 14. At day 21, there was not a significant difference in the expression of these markers. COL10A1, the typical hypertrophy marker, was significantly lower in concave microwell plates during the whole culture period. Runx-2, a marker of hypertrophy and osteogenesis, was significantly lower at day 7 in pellets cultured in concave microwell plates than those cultured in tubes. Concave microwell plates provide a convenient and effective tool for the study of in vitro chondrogenesis and may replace the use of propylene culture tube.

  12. Line facilities outline

    International Nuclear Information System (INIS)

    1998-08-01

    This book deals with line facilities. The contents of this book are outline line of wire telecommunication ; development of line, classification of section of line and theory of transmission of line, cable line ; structure of line, line of cable in town, line out of town, domestic cable and other lines, Optical communication ; line of optical cable, transmission method, measurement of optical communication and cable of the sea bottom, Equipment of telecommunication line ; telecommunication line facilities and telecommunication of public works, construction of cable line and maintenance and Regulation of line equipment ; regulation on technique, construction and maintenance.

  13. Outline of OMEGA project

    International Nuclear Information System (INIS)

    Umezawa, Hirokazu

    1989-01-01

    Attention has been paid to the research and development on the group partition and annihilation disposal technology which separates long life radioactive nuclides, rare stable nuclides and so on in high level radioactive wastes and utilizes those for respective suitable uses, or which searches for the possibility of promoting the nuclear disintegration of long life radioactive nuclides, as the basic research aiming at the further development of atomic energy. It was named 'OMEGA project' and its promotion has been carried out. The outline of the project and the international circumstances surrounding it are described. In the high level radioactive wastes generated from the reprocessing of spent nuclear fuel, the alpha and beta-gamma radionuclides having long life are contained. Consequently, it is necessary to isolate them from human environment for very long period, and the basic method is the glass solidification and the disposal in deep strata, therefore the technical development has been advanced. The OMEGA project was decided in October, 1988, and the course of the research carried out so far, the international cooperation and the subjects of research and development are reported. (K.I.)

  14. Convexity and concavity constants in Lorentz and Marcinkiewicz spaces

    Science.gov (United States)

    Kaminska, Anna; Parrish, Anca M.

    2008-07-01

    We provide here the formulas for the q-convexity and q-concavity constants for function and sequence Lorentz spaces associated to either decreasing or increasing weights. It yields also the formula for the q-convexity constants in function and sequence Marcinkiewicz spaces. In this paper we extent and enhance the results from [G.J.O. Jameson, The q-concavity constants of Lorentz sequence spaces and related inequalities, Math. Z. 227 (1998) 129-142] and [A. Kaminska, A.M. Parrish, The q-concavity and q-convexity constants in Lorentz spaces, in: Banach Spaces and Their Applications in Analysis, Conference in Honor of Nigel Kalton, May 2006, Walter de Gruyter, Berlin, 2007, pp. 357-373].

  15. New high-precision deep concave optical surface manufacturing capability

    Science.gov (United States)

    Piché, François; Maloney, Chris; VanKerkhove, Steve; Supranowicz, Chris; Dumas, Paul; Donohue, Keith

    2017-10-01

    This paper describes the manufacturing steps necessary to manufacture hemispherical concave aspheric mirrors for high- NA systems. The process chain is considered from generation to final figuring and includes metrology testing during the various manufacturing steps. Corning Incorporated has developed this process by taking advantage of recent advances in commercially available Satisloh and QED Technologies equipment. Results are presented on a 100 mm concave radius nearly hemispherical (NA = 0.94) fused silica sphere with a better than 5 nm RMS figure. Part interferometric metrology was obtained on a QED stitching interferometer. Final figure was made possible by the implementation of a high-NA rotational MRF mode recently developed by QED Technologies which is used at Corning Incorporated for production. We also present results from a 75 mm concave radius (NA = 0.88) Corning ULE sphere that was produced using sub-aperture tools from generation to final figuring. This part demonstrates the production chain from blank to finished optics for high-NA concave asphere.

  16. 1-concave basis for TU games and the library game

    NARCIS (Netherlands)

    Driessen, Theo; Khmelnitskaya, Anna Borisovna; Sales, J.

    2012-01-01

    The study of 1-convex/1-concave TU games possessing a nonempty core and for which the nucleolus is linear was initiated by Driessen and Tijs (Methods Oper. Res. 46:395–406, 1983) and Driessen (OR Spectrum 7:19–26, 1985). However, until recently appealing abstract and practical examples of these

  17. Smith-Purcell radiation from concave dotted gratings

    Science.gov (United States)

    Sergeeva, D. Yu.; Tishchenko, A. A.; Aryshev, A. S.; Strikhanov, M. N.

    2018-02-01

    We present the first-principles theory of Smith-Purcell effect from the concave dotted grating consisting of bent chains of separated micro- or nanoparticles. The numerical analysis demonstrates that the obtained spectral-angular distributions change significantly depending on the structure of the grating.

  18. Quantitative test for concave aspheric surfaces using a Babinet compensator.

    Science.gov (United States)

    Saxena, A K

    1979-08-15

    A quantitative test for the evaluation of surface figures of concave aspheric surfaces using a Babinet compensator is reported. A theoretical estimate of the sensitivity is 0.002lambda for a minimum detectable phase change of 2 pi x 10(-3) rad over a segment length of 1.0 cm.

  19. Prescribing and evaluating target dose in dose-painting treatment plans

    DEFF Research Database (Denmark)

    Håkansson, Katrin; Specht, Lena; Aznar, Marianne C

    2014-01-01

    BACKGROUND: Assessment of target dose conformity in multi-dose-level treatment plans is challenging due to inevitable over/underdosage at the border zone between dose levels. Here, we evaluate different target dose prescription planning aims and approaches to evaluate the relative merit of such p......-painting and multi-dose-level plans. The tool can be useful for quality assurance of multi-center trials, and for visualizing the development of treatment planning in routine clinical practice....... of such plans. A quality volume histogram (QVH) tool for history-based evaluation is proposed. MATERIAL AND METHODS: Twenty head and neck cancer dose-painting plans with five prescription levels were evaluated, as well as clinically delivered simultaneous integrated boost (SIB) plans from 2010 and 2012. The QVH...

  20. Is uniform target dose possible in IMRT plans in the head and neck?

    International Nuclear Information System (INIS)

    Vineberg, K.A.; Eisbruch, A.; Coselmon, M.M.; McShan, D.L.; Kessler, M.L.; Fraass, B.A.

    2002-01-01

    Purpose: Various published reports involving intensity-modulated radiotherapy (IMRT) plans developed using automated optimization (inverse planning) have demonstrated highly conformal plans. These reported conformal IMRT plans involve significant target dose inhomogeneity, including both overdosage and underdosage within the target volume. In this study, we demonstrate the development of optimized beamlet IMRT plans that satisfy rigorous dose homogeneity requirements for all target volumes (e.g., ±5%), while also sparing the parotids and other normal structures. Methods and Materials: The treatment plans of 15 patients with oropharyngeal cancer who were previously treated with forward-planned multisegmental IMRT were planned again using an automated optimization system developed in-house. The optimization system allows for variable sized beamlets computed using a three-dimensional convolution/superposition dose calculation and flexible cost functions derived from combinations of clinically relevant factors (costlets) that can include dose, dose-volume, and biologic model-based costlets. The current study compared optimized IMRT plans designed to treat the various planning target volumes to doses of 66, 60, and 54 Gy with varying target dose homogeneity while using a flexible optimization cost function to minimize the dose to the parotids, spinal cord, oral cavity, brainstem, submandibular nodes, and other structures. Results: In all cases, target dose uniformity was achieved through steeply varying dose-based costs. Differences in clinical plan evaluation metrics were evaluated for individual cases (eight different target homogeneity costlets), and for the entire cohort of plans. Highly conformal plans were achieved, with significant sparing of both the contralateral and ipsilateral parotid glands. As the homogeneity of the target dose distributions was allowed to decrease, increased sparing of the parotids (and other normal tissues) may be achieved. However, it

  1. Bimacrocyclic concave N-heterocyclic carbenes (NHCs): synthesis, structure, and application in catalyses

    OpenAIRE

    Lüning , Ulrich; Winkelmann , Ole

    2009-01-01

    Abstract Imidazolinium moieties have been incorporated into bimacrocycles to generate precursors for concave N-heterocyclic carbenes (NHCs). Starting from 2-nitroresorcinol and alkenols, symmetric concave imidazolinium salts 1 were obtained. Bimacrocyclization was achieved via ring closing metathesis (RCM). In an analogous fashion, axially chiral concave imidazolinium salts 2 were obtained by using a naphthalene bridgehead devoid of local C2-symmetry. The concave NHCs derived from ...

  2. Performance of solar still with a concave wick evaporation surface

    Energy Technology Data Exchange (ETDEWEB)

    Kabeel, A.E. [Mechanical Power Department, Faculty of Engineering, Tanta University (Egypt)

    2009-10-15

    Surfaces used for evaporation and condensation phenomenon play important roles in the performance of basin type solar still. In the present study, a concave wick surface was used for evaporation, whereas four sides of a pyramid shaped still were used for condensation. Use of jute wick increased the amount of absorbed solar radiation and enhanced the evaporation surface area. A concave shaped wick surface increases the evaporation area due to the capillary effect. Results show that average distillate productivity in day time was 4.1 l/m{sup 2} and a maximum instantaneous system efficiency of 45% and average daily efficiency of 30% were recorded. The maximum hourly yield was 0.5 l/h. m{sup 2} after solar noon. An estimated cost of 1l of distillate was 0.065 $ for the presented solar still. (author)

  3. Performance of solar still with a concave wick evaporation surface

    International Nuclear Information System (INIS)

    Kabeel, A.E.

    2009-01-01

    Surfaces used for evaporation and condensation phenomenon play important roles in the performance of basin type solar still. In the present study, a concave wick surface was used for evaporation, whereas four sides of a pyramid shaped still were used for condensation. Use of jute wick increased the amount of absorbed solar radiation and enhanced the evaporation surface area. A concave shaped wick surface increases the evaporation area due to the capillary effect. Results show that average distillate productivity in day time was 4.1 l/m 2 and a maximum instantaneous system efficiency of 45% and average daily efficiency of 30% were recorded. The maximum hourly yield was 0.5 l/h. m 2 after solar noon. An estimated cost of 1 l of distillate was 0.065 $ for the presented solar still.

  4. Monotonicity and Logarithmic Concavity of Two Functions Involving Exponential Function

    Science.gov (United States)

    Liu, Ai-Qi; Li, Guo-Fu; Guo, Bai-Ni; Qi, Feng

    2008-01-01

    The function 1 divided by "x"[superscript 2] minus "e"[superscript"-x"] divided by (1 minus "e"[superscript"-x"])[superscript 2] for "x" greater than 0 is proved to be strictly decreasing. As an application of this monotonicity, the logarithmic concavity of the function "t" divided by "e"[superscript "at"] minus "e"[superscript"(a-1)""t"] for "a"…

  5. Field arrangement and dosimetry verification for concave target

    International Nuclear Information System (INIS)

    Chen Liang; Wang Huankun; Li Yumin

    2005-01-01

    Objective: To provide a method of radiotherapy field arrangement for concave paraspinal target. Methods: Plan was designed for concave target in wax phantom and the selected patients by the guidance of beam eye view (BEV) provided by a 3D treatment planning system (CREAT EXPERT). In BEV, the inner border of all tangential fields was 2 mm out of the organ at risk (OAR) and the outer border was 5 mm beyond the target. Dosimetry films and ion chamber were used to verify the dose distribution and point dose in the wax phantom. Results: Dose distribution in phantom and patient was homogeneous. The mean dose of OAR in phantom did not exceed 16% of the prescribed dose. Isodose curves dropped more than 8% per mm between the target and OAR in the phantom. Film dosimetry coincided well with the calculated results. Position error in high dose region was with- in 4 mm and absolute dose errors were no more than 5%. Conclusion: Tangential field arrangement is valuable and practical in radiotherapy for concave paraspinal targets. (authors)

  6. STRONG ORACLE OPTIMALITY OF FOLDED CONCAVE PENALIZED ESTIMATION.

    Science.gov (United States)

    Fan, Jianqing; Xue, Lingzhou; Zou, Hui

    2014-06-01

    Folded concave penalization methods have been shown to enjoy the strong oracle property for high-dimensional sparse estimation. However, a folded concave penalization problem usually has multiple local solutions and the oracle property is established only for one of the unknown local solutions. A challenging fundamental issue still remains that it is not clear whether the local optimum computed by a given optimization algorithm possesses those nice theoretical properties. To close this important theoretical gap in over a decade, we provide a unified theory to show explicitly how to obtain the oracle solution via the local linear approximation algorithm. For a folded concave penalized estimation problem, we show that as long as the problem is localizable and the oracle estimator is well behaved, we can obtain the oracle estimator by using the one-step local linear approximation. In addition, once the oracle estimator is obtained, the local linear approximation algorithm converges, namely it produces the same estimator in the next iteration. The general theory is demonstrated by using four classical sparse estimation problems, i.e., sparse linear regression, sparse logistic regression, sparse precision matrix estimation and sparse quantile regression.

  7. Outline

    Indian Academy of Sciences (India)

    Two applied questions: How are polycyclic aromatic hydrocarbons and soot particles formed in diesel engines and interstellar space? What is the ignition delay for JP10 at a given T and P and how it can be reduced?

  8. Momocs : outline analysis using R

    OpenAIRE

    Bonhomme, Vincent; PICQ, Sandrine; Claude, Julien; Gaucherel, Cedric

    2014-01-01

    We introduce here Momocs, a package intended to ease and popularize modern mor- phometrics with R, and particularly outline analysis, which aims to extract quantitative variables from shapes. It mostly hinges on the functions published in the book entitled Modern Morphometrics Using R by Claude (2008). From outline extraction from raw data to multivariate analysis, Momocs provides an integrated and convenient toolkit to students and researchers who are, or may become, interested in describing...

  9. Target dose conversion modeling from pencil beam (PB) to Monte Carlo (MC) for lung SBRT

    International Nuclear Information System (INIS)

    Zheng, Dandan; Zhu, Xiaofeng; Zhang, Qinghui; Liang, Xiaoying; Zhen, Weining; Lin, Chi; Verma, Vivek; Wang, Shuo; Wahl, Andrew; Lei, Yu; Zhou, Sumin; Zhang, Chi

    2016-01-01

    A challenge preventing routine clinical implementation of Monte Carlo (MC)-based lung SBRT is the difficulty of reinterpreting historical outcome data calculated with inaccurate dose algorithms, because the target dose was found to decrease to varying degrees when recalculated with MC. The large variability was previously found to be affected by factors such as tumour size, location, and lung density, usually through sub-group comparisons. We hereby conducted a pilot study to systematically and quantitatively analyze these patient factors and explore accurate target dose conversion models, so that large-scale historical outcome data can be correlated with more accurate MC dose without recalculation. Twenty-one patients that underwent SBRT for early-stage lung cancer were replanned with 6MV 360° dynamic conformal arcs using pencil-beam (PB) and recalculated with MC. The percent D95 difference (PB-MC) was calculated for the PTV and GTV. Using single linear regression, this difference was correlated with the following quantitative patient indices: maximum tumour diameter (MaxD); PTV and GTV volumes; minimum distance from tumour to soft tissue (dmin); and mean density and standard deviation of the PTV, GTV, PTV margin, lung, and 2 mm, 15 mm, 50 mm shells outside the PTV. Multiple linear regression and artificial neural network (ANN) were employed to model multiple factors and improve dose conversion accuracy. Single linear regression with PTV D95 deficiency identified the strongest correlation on mean-density (location) indices, weaker on lung density, and the weakest on size indices, with the following R 2 values in decreasing orders: shell2mm (0.71), PTV (0.68), PTV margin (0.65), shell15mm (0.62), shell50mm (0.49), lung (0.40), dmin (0.22), GTV (0.19), MaxD (0.17), PTV volume (0.15), and GTV volume (0.08). A multiple linear regression model yielded the significance factor of 3.0E-7 using two independent features: mean density of shell2mm (P = 1.6E-7) and PTV volume

  10. Reducing dose to the lungs through loosing target dose homogeneity requirement for radiotherapy of non small cell lung cancer.

    Science.gov (United States)

    Miao, Junjie; Yan, Hui; Tian, Yuan; Ma, Pan; Liu, Zhiqiang; Li, Minghui; Ren, Wenting; Chen, Jiayun; Zhang, Ye; Dai, Jianrong

    2017-11-01

    It is important to minimize lung dose during intensity-modulated radiation therapy (IMRT) of nonsmall cell lung cancer (NSCLC). In this study, an approach was proposed to reduce lung dose by relaxing the constraint of target dose homogeneity during treatment planning of IMRT. Ten NSCLC patients with lung tumor on the right side were selected. The total dose for planning target volume (PTV) was 60 Gy (2 Gy/fraction). For each patient, two IMRT plans with six beams were created in Pinnacle treatment planning system. The dose homogeneity of target was controlled by constraints on the maximum and uniform doses of target volume. One IMRT plan was made with homogeneous target dose (the resulting target dose was within 95%-107% of the prescribed dose), while another IMRT plan was made with inhomogeneous target dose (the resulting target dose was more than 95% of the prescribed dose). During plan optimization, the dose of cord and heart in two types of IMRT plans were kept nearly the same. The doses of lungs, PTV and organs at risk (OARs) between two types of IMRT plans were compared and analyzed quantitatively. For all patients, the lung dose was decreased in the IMRT plans with inhomogeneous target dose. On average, the mean dose, V5, V20, and V30 of lung were reduced by 1.4 Gy, 4.8%, 3.7%, and 1.7%, respectively, and the dose to normal tissue was also reduced. These reductions in DVH values were all statistically significant (P target dose could protect lungs better and may be considered as a choice for treating NSCLC. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

  11. Directable weathering of concave rock using curvature estimation.

    Science.gov (United States)

    Jones, Michael D; Farley, McKay; Butler, Joseph; Beardall, Matthew

    2010-01-01

    We address the problem of directable weathering of exposed concave rock for use in computer-generated animation or games. Previous weathering models that admit concave surfaces are computationally inefficient and difficult to control. In nature, the spheroidal and cavernous weathering rates depend on the surface curvature. Spheroidal weathering is fastest in areas with large positive mean curvature and cavernous weathering is fastest in areas with large negative mean curvature. We simulate both processes using an approximation of mean curvature on a voxel grid. Both weathering rates are also influenced by rock durability. The user controls rock durability by editing a durability graph before and during weathering simulation. Simulations of rockfall and colluvium deposition further improve realism. The profile of the final weathered rock matches the shape of the durability graph up to the effects of weathering and colluvium deposition. We demonstrate the top-down directability and visual plausibility of the resulting model through a series of screenshots and rendered images. The results include the weathering of a cube into a sphere and of a sheltered inside corner into a cavern as predicted by the underlying geomorphological models.

  12. Apparatus including concave reflectors and a line of optical fibers

    International Nuclear Information System (INIS)

    Dolan, J.T.

    1992-01-01

    This patent describes an apparatus including a radiation source which emits in a multiplicity of directions for focusing radiation on an object which may receive radiation within a certain solid angle. It comprises a first reflector and a second reflector, the first reflector being elliptical in cross section and having a first focus and a second focus, the second reflector being circular in cross section and having a center, and a radius equal to the distance between the second reflector and the first focus, the first reflector and the second reflector being arranged so that a concave reflecting surface of the first reflector faces a concave reflecting surface of the second reflector, and so arranged that the first focus of the first reflector corresponds to the center of the second reflector, the radiation source being an elongated discharge bulb, the object being a group of two or more optical fibers defining at least one line of optical fibers which are located at the second focus of the first reflector

  13. Momocs: Outline Analysis Using R

    Directory of Open Access Journals (Sweden)

    Vincent Bonhomme

    2014-02-01

    Full Text Available We introduce here Momocs, a package intended to ease and popularize modern morphometrics with R, and particularly outline analysis, which aims to extract quantitative variables from shapes. It mostly hinges on the functions published in the book entitled Modern Morphometrics Using R by Claude (2008. From outline extraction from raw data to multivariate analysis, Momocs provides an integrated and convenient toolkit to students and researchers who are, or may become, interested in describing the shape and its variation. The methods implemented so far in Momocs are introduced through a simplistic case study that aims to test if two sets of bottles have different shapes.

  14. Double concave cesium encapsulation by two charged sumanenyl bowls

    Energy Technology Data Exchange (ETDEWEB)

    Spisak, Sarah N.; Wei, Zheng; Petrukhina, Marina A. [Department of Chemistry, University at Albany, State University of New York, Albany, NY (United States); Rogachev, Andrey Yu. [Department of Chemistry, Illinois Institute of Technology, Chicago, IL (United States); Amaya, Toru [Department of Applied Chemistry, Graduate School of Engineering, Osaka University, Suita (Japan); Hirao, Toshikazu [Department of Applied Chemistry, Graduate School of Engineering, Osaka University, Suita (Japan); The Institute of Scientific and Industrial Research, Osaka University (Japan)

    2017-03-01

    The controlled reaction of Na and Cs, two alkali metals of different ionic sizes and binding abilities, with sumanene (C{sub 21}H{sub 12}) affords a novel type of organometallic sandwich [Cs(C{sub 21}H{sub 11}{sup -}){sub 2}]{sup -}, which crystallized as a solvent-separated ion pair with a [Na(18-crown-6)(THF){sub 2}]{sup +} cation (where THF=tetrahydrofuran). The unprecedented double concave encapsulation of a metal ion by two bowl-shaped sumanenyl anions in [Cs(C{sub 21}H{sub 11}{sup -}){sub 2}]{sup -} was revealed crystallographically. Evaluation of bonding and energetics of the remarkable product was accomplished computationally (B2PLYP-D/TZVP/ZORA), providing insights into its formation. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Polarization of concave domains by traveling wave pinning.

    Directory of Open Access Journals (Sweden)

    Slawomir Bialecki

    Full Text Available Pattern formation is one of the most fundamental yet puzzling phenomena in physics and biology. We propose that traveling front pinning into concave portions of the boundary of 3-dimensional domains can serve as a generic gradient-maintaining mechanism. Such a mechanism of domain polarization arises even for scalar bistable reaction-diffusion equations, and, depending on geometry, a number of stationary fronts may be formed leading to complex spatial patterns. The main advantage of the pinning mechanism, with respect to the Turing bifurcation, is that it allows for maintaining gradients in the specific regions of the domain. By linking the instant domain shape with the spatial pattern, the mechanism can be responsible for cellular polarization and differentiation.

  16. Transient river response, captured by channel steepness and its concavity

    Science.gov (United States)

    Vanacker, Veerle; von Blanckenburg, Friedhelm; Govers, Gerard; Molina, Armando; Campforts, Benjamin; Kubik, Peter W.

    2015-01-01

    Mountain rivers draining tropical regions are known to be great conveyor belts carrying efficiently more than half of the global sediment flux to the oceans. Many tropical mountain areas are located in tectonically active belts where the hillslope and stream channel morphology are rapidly evolving in response to changes in base level. Here, we report basin-wide denudation rates for an east-west transect through the tropical Andes. Hillslope and channel morphology vary systematically from east to west, reflecting the transition from high relief, strongly dissected topography in the escarpment zones into relatively low relief topography in the inter-Andean valley. The spatial pattern of differential denudation rates reflects the transient adjustment of the landscape to rapid river incision following tectonic uplift and river diversion. In the inter-Andean valley, upstream of the wave of incision, slopes and river channels display a relatively smooth, concave-up morphology and denudation rates (time scale of 104-105 a) are consistently low (3 to 200 mm/ka). In contrast, slopes and river channels of rejuvenated basins draining the eastern cordillera are steep to very steep; and the studied drainage basins show a wide range of denudation rate values (60 to 400 mm/ka) that increase systematically with increasing basin mean slope gradient, channel steepness, and channel convexity. Drainage basins that are characterised by strong convexities in their river longitudinal profiles systematically have higher denudation rates. As such, this is one of the first studies that provides field-based evidence of a correlation between channel concavity and basin mean denudation rates, consistent with process-based fluvial incision models.

  17. Multi-isocenter stereotactic radiotherapy: implications for target dose distributions of systematic and random localization errors

    International Nuclear Information System (INIS)

    Ebert, M.A.; Zavgorodni, S.F.; Kendrick, L.A.; Weston, S.; Harper, C.S.

    2001-01-01

    Purpose: This investigation examined the effect of alignment and localization errors on dose distributions in stereotactic radiotherapy (SRT) with arced circular fields. In particular, it was desired to determine the effect of systematic and random localization errors on multi-isocenter treatments. Methods and Materials: A research version of the FastPlan system from Surgical Navigation Technologies was used to generate a series of SRT plans of varying complexity. These plans were used to examine the influence of random setup errors by recalculating dose distributions with successive setup errors convolved into the off-axis ratio data tables used in the dose calculation. The influence of systematic errors was investigated by displacing isocenters from their planned positions. Results: For single-isocenter plans, it is found that the influences of setup error are strongly dependent on the size of the target volume, with minimum doses decreasing most significantly with increasing random and systematic alignment error. For multi-isocenter plans, similar variations in target dose are encountered, with this result benefiting from the conventional method of prescribing to a lower isodose value for multi-isocenter treatments relative to single-isocenter treatments. Conclusions: It is recommended that the systematic errors associated with target localization in SRT be tracked via a thorough quality assurance program, and that random setup errors be minimized by use of a sufficiently robust relocation system. These errors should also be accounted for by incorporating corrections into the treatment planning algorithm or, alternatively, by inclusion of sufficient margins in target definition

  18. A versatile curve-fit model for linear to deeply concave rank abundance curves

    NARCIS (Netherlands)

    Neuteboom, J.H.; Struik, P.C.

    2005-01-01

    A new, flexible curve-fit model for linear to concave rank abundance curves was conceptualized and validated using observational data. The model links the geometric-series model and log-series model and can also fit deeply concave rank abundance curves. The model is based ¿ in an unconventional way

  19. Concave distal end of ulna metaphysis alone is not a sign of rickets

    Energy Technology Data Exchange (ETDEWEB)

    Oestreich, Alan E. [Cincinnati Children' s Hospital Medical Center, Department of Radiology, 5031, Cincinnati, OH (United States)

    2015-07-15

    Statements have been made in the literature and in legal testimony that misrepresent the radiographic finding of concave distal end of the ulnar metaphysis. To demonstrate that a concave distal end of the ossified ulna in infancy can be normal. Eighty distal wrists of randomly selected infants in the first year of life with radiographic evidence that ruled out rickets were reviewed. In 16 of the cases (20%), mild or moderate concavity of the distal end of the ulna was seen. An intact metaphyseal collar of distal radius or ulna confirmed the absence of radiographic rickets. The finding of 20% of concave distal ulnas in the first year of life confirms the widely acknowledged statements that concave distal end of the ulna alone is not indicative of rickets. Statements to the contrary are not justified. (orig.)

  20. Concave distal end of ulna metaphysis alone is not a sign of rickets

    International Nuclear Information System (INIS)

    Oestreich, Alan E.

    2015-01-01

    Statements have been made in the literature and in legal testimony that misrepresent the radiographic finding of concave distal end of the ulnar metaphysis. To demonstrate that a concave distal end of the ossified ulna in infancy can be normal. Eighty distal wrists of randomly selected infants in the first year of life with radiographic evidence that ruled out rickets were reviewed. In 16 of the cases (20%), mild or moderate concavity of the distal end of the ulna was seen. An intact metaphyseal collar of distal radius or ulna confirmed the absence of radiographic rickets. The finding of 20% of concave distal ulnas in the first year of life confirms the widely acknowledged statements that concave distal end of the ulna alone is not indicative of rickets. Statements to the contrary are not justified. (orig.)

  1. System to outline the graduatestudents

    Directory of Open Access Journals (Sweden)

    Alberto Schanaider

    Full Text Available Objective: to evaluate the system to outline the graduate students from the Post-Graduate Programs of CAPES Medicine III area. Method: it was analyzed the book of indicators and the Document of Area of the Post-Graduate Programs of Surgery, also checking the literature about this issue. Results: there was a paucity of data from most of the programs, as regards to the methods for evaluation of graduate students. The current system lacks a standard and an institutional support to outline the graduate students. In the public system there is a concentration of postgraduate students in Medicine; however, they represent a small part of those Brazilians students who finished their graduation courses in Medicine. In the current context, the quest for the post graduate courses and consequently for a research field or even a teaching career, has been replaced by the private sector jobs and the labor market, both in non-academic assistance activities. Conclusion: it is imperative to establish not only science and technology innovation policies but also educational and health policies acting harmoniously and stimulating the qualification and the teaching career, improving the post-graduate courses. It is necessary to develop a single form under the institutional guidance of CAPES with the conception of a National Program for Graduate Student in order to consolidate guidelines to mapping the graduate students of post-graduate programs in surgery, in our country.

  2. Outline of nuclear monitor report

    International Nuclear Information System (INIS)

    1979-01-01

    The questionnaire investigation was conducted by the Science and Technology Agency about the atomic energy monitoring. The time of report was from March 4, 1978, to March 25, 1978. The number of answers for this questionnaire was 276, and the percentage of answers is 54%. This questionnaire was sent out to men and women of various occupations and ages. There are three questions in this questionnaire; The first question is ''Do you think the measures of the government are sufficient for nuclear power plant construction[ What is the point to be improved['', the second question is ''In what points do you feel uneasiness about the safety of nuclear power generation[ What do you want to know['', and the third question is ''Have you ever seen the official report on atomic energy published by the Science and Technology Agency[ Do you think this official report on atomic energy is effective or not[ What is the point to be improved[ The abstract of each answer is outlined as the investigated result. The reports on occasions were obtained separately. The number of these reports was 162. The contents of these reports were classified into the official report on atomic energy, the safety of atomic energy, the administration of atomic energy, the developing and utilization, the monitoring system, the Mutsu, the energy saving, the reprocessing, etc., and these contents are outlined. The composition of these monitors is shown. (Nakai, Y.)

  3. Preliminary estimation of minimum target dose in intracavitary radiotherapy for cervical cancer

    Energy Technology Data Exchange (ETDEWEB)

    Ohara, Kiyoshi; Oishi-Tanaka, Yumiko; Sugahara, Shinji; Itai, Yuji [Tsukuba Univ., Ibaraki (Japan). Inst. of Clinical Medicine

    2001-08-01

    In intracavitary radiotherapy (ICRT) for cervical cancer, minimum target dose (D{sub min}) will pertain to local disease control more directly than will reference point A dose (D{sub A}). However, ICRT has been performed traditionally without specifying D{sub min} since the target volume was not identified. We have estimated D{sub min} retrospectively by identifying tumors using magnetic resonance (MR) images. Pre- and posttreatment MR images of 31 patients treated with high-dose-rate ICRT were used. ICRT was performed once weekly at 6.0 Gy D{sub A}, and involved 2-5 insertions for each patient, 119 insertions in total. D{sub min} was calculated arbitrarily simply at the point A level using the tumor width (W{sub A}) to compare with D{sub A}. W{sub A} at each insertion was estimated by regression analysis with pre- and posttreatment W{sub A}. D{sub min} for each insertion varied from 3.0 to 46.0 Gy, a 16-fold difference. The ratio of total D{sub min} to total D{sub A} for each patient varied from 0.5 to 6.5. Intrapatient D{sub min} difference between the initial insertion and final insertion varied from 1.1 to 3.4. Preliminary estimation revealed that D{sub min} varies widely under generic dose prescription. Thorough D{sub min} specification will be realized when ICRT-applicator insertion is performed under MR imaging. (author)

  4. Target dose study of effects of changes in the AAA calculation resolution on lung SABR plan

    International Nuclear Information System (INIS)

    Kim, Dae Il; Son, Sang Jun; Ahn, Bum Seok; Jung, Chi Hoon; Yoo, Suk Hyun

    2014-01-01

    Changing the calculation grid of AAA in Lung SABR plan and to analyze the changes in target dose, and investigated the effects associated with it, and considered a suitable method of application. 4D CT image that was used to plan all been taken with Brilliance Big Bore CT (Philips, Netherlands) and in Lung SABR plan(Eclipse TM ver10.0.42, Varian, the USA), use anisotropic analytic algorithm(AAA, ver.10, Varian Medical Systems, Palo Alto, CA, USA) and, was calculated by the calculation grid 1.0, 3.0, 5.0 mm in each Lung SABR plan. Lung SABR plan of 10 cases are using each of 1.0 mm, 3.0 mm, 5.0 mm calculation grid, and in case of use a 1.0 mm calculation grid V98 of the prescribed dose is about 99.5%±1.5%, Dmin of the prescribed dose is about 92.5±1.5% and Homogeneity Index(HI) is 1.0489±0.0025. In the case of use a 3.0 mm calculation grid V98 dose of the prescribed dose is about 90±4.5% , Dmin of the prescribed dose is about 87.5±3% and HI is about 1.07±1. In the case of use a 5.0 mm calculation grid V98 dose of the prescribed dose is about 63±15%, Dmin of the prescribed dose is about 83±4% and HI is about 1.13±0.2, respectively. The calculation grid of 1.0 mm is better improves the accuracy of dose calculation than using 3.0 mm and 5.mm, although calculation times increase in the case of smaller PTV relatively. As lung, spread relatively large and low density and small PTV, it is considered and good to use a calculation grid of 1.0 mm

  5. Hydrogen adsorption-mediated synthesis of concave Pt nanocubes and their enhanced electrocatalytic activity

    Science.gov (United States)

    Lu, Bang-An; Du, Jia-Huan; Sheng, Tian; Tian, Na; Xiao, Jing; Liu, Li; Xu, Bin-Bin; Zhou, Zhi-You; Sun, Shi-Gang

    2016-06-01

    Concave nanocubes are enclosed by high-index facets and have negative curvature; they are expected to have enhanced reactivity, as compared to nanocubes with flat surfaces. Herein, we propose and demonstrate a new strategy for the synthesis of concave Pt nanocubes with {hk0} high-index facets, by using a hydrogen adsorption-mediated electrochemical square-wave potential method. It was found that Pt atoms prefer to deposit on edge sites rather than terrace sites on Pt surfaces with intensive hydrogen adsorption, resulting in the formation of concave structures. The as-prepared concave Pt nanocubes exhibit enhanced catalytic activity and stability towards oxidation of ethanol and formic acid in acidic solutions, compared to commercial Pt/C catalysts.Concave nanocubes are enclosed by high-index facets and have negative curvature; they are expected to have enhanced reactivity, as compared to nanocubes with flat surfaces. Herein, we propose and demonstrate a new strategy for the synthesis of concave Pt nanocubes with {hk0} high-index facets, by using a hydrogen adsorption-mediated electrochemical square-wave potential method. It was found that Pt atoms prefer to deposit on edge sites rather than terrace sites on Pt surfaces with intensive hydrogen adsorption, resulting in the formation of concave structures. The as-prepared concave Pt nanocubes exhibit enhanced catalytic activity and stability towards oxidation of ethanol and formic acid in acidic solutions, compared to commercial Pt/C catalysts. Electronic supplementary information (ESI) available: Details of DFT calculation, SEM images of concave Pt nanocubes, mass activity and stability characterization of the catalysts. See DOI: 10.1039/c6nr02349e

  6. Enhanced Absorption in Organic Thin-Films from Imprinted Concave Nanostructures

    DEFF Research Database (Denmark)

    Goszczak, Arkadiusz Jaroslaw; Rubahn, Horst-Günter; Madsen, Morten

    2017-01-01

    In this work, a rapid, replicable method for imprinting concave nanostructures to be used as functional light-trapping nanostructures in organic thin-films is presented. Porous anodic alumina templates were fabricated both by anodization of thick Al foils and by anodization of submicrometer thin Al...... patterns and used for imprinting of spin coated photoresist on glass substrates. We have investigated semi-periodic and aperiodic imprinted large concave patterns fabricated from rigid masters after anodization of Al in H3PO4. We show that metal covered imprinted concaves show enhancement in absorption...

  7. On the impact of a concave nosed axisymmetric body on a free surface

    OpenAIRE

    Mathai, Varghese; Govardhan, Raghuraman N.; Arakeri, Vijay H.

    2017-01-01

    We report on an experimental study of the vertical impact of a concave nosed axisymmetric body on a free surface. Previous studies have shown that bodies with a convex nose, like a sphere, produce a well defined splash with a relatively large cavity behind the model. In contrast, we find that with a concave nose, there is hardly a splash and the cavity extent is greatly reduced. This may be explained by the fact that in the concave nosed case, the initial impact is between a confined air pock...

  8. High voltage photo-switch package module having encapsulation with profiled metallized concavities

    Science.gov (United States)

    Sullivan, James S; Sanders, David M; Hawkins, Steven A; Sampayan, Stephen A

    2015-05-05

    A photo-conductive switch package module having a photo-conductive substrate or wafer with opposing electrode-interface surfaces metalized with first metallic layers formed thereon, and encapsulated with a dielectric encapsulation material such as for example epoxy. The first metallic layers are exposed through the encapsulation via encapsulation concavities which have a known contour profile, such as a Rogowski edge profile. Second metallic layers are then formed to line the concavities and come in contact with the first metal layer, to form profiled and metalized encapsulation concavities which mitigate enhancement points at the edges of electrodes matingly seated in the concavities. One or more optical waveguides may also be bonded to the substrate for coupling light into the photo-conductive wafer, with the encapsulation also encapsulating the waveguides.

  9. Theoretical fringe profiles with crossed Babinet compensators in testing concave aspheric surfaces.

    Science.gov (United States)

    Saxena, A K; Lancelot, J P

    1982-11-15

    This paper presents the theory for the use of crossed Babinet compensators in testing concave aspheric surfaces. Theoretical fringe profiles for a sphere and for an aspheric surface with primary aberration are shown. Advantages of this method are discussed.

  10. [African neurosurgery. 1: Historical outline].

    Science.gov (United States)

    el Khamlichi, A

    1996-01-01

    This outline of the history of African Neurosurgery explains the role that North Africa has played in the Middle Ages in the development of Neurosurgery, the origins of the development of the latter in twentieth century, and the delay that African Neurosurgery still shows at the present time in the majority of African countries. On the papyrus of the pharaonic era, we have found the description of some neurosurgical procedures such as trephination and brain aspiration by a transphenoidal approach used before mummification. It is particularly trephination which summarizes the ancient history of African neurosurgery, as it was widely used throughout the continent, practised and taught by healers in African tribes. The technical concepts of trephination are based, to a great extent, on the descriptions of Arab physicians of the Middle Ages. It was at that time (Middle Ages) that several Arab physicians such as Avicenne, Rhazes, and Avenzhoer described many types of nervous system diseases and the techniques to treat them. But it was mainly Abulkassim Al Zahraoui (Abulkassis) who was the pioneer of neurosurgery as he devoted one volume of his treatise (made up of 30 volumes) to neurosurgery, a precise description of many aspects of neurosurgical pathology, its treatment, instruments and neurosurgical techniques. We have reported in this article five original extracts in Arabic which deal with skull fractures and their treatment, vertebro-medullary traumas and their treatment, hydrocephalus and its treatment, tumors of the skull vault and their treatment, and finally the basic knowledge of anatomy which is of great interest for a surgeon. The medical knowledge of that time which gave birth to medical schools and hospitals was transmitted progressively to Europe and played an important role in the development of medicine during the European Renaissance in the fifteenth and sixteenth centuries. During colonization, neurosurgical practice started and developed in many

  11. Controlled synthesis of concave tetrahedral palladium nanocrystals by reducing Pd(acac)2 with carbon monoxide

    International Nuclear Information System (INIS)

    Zhu, Hai; Chi, Quan; Zhao, Yanxi; Li, Chunya; Tang, Heqing; Li, Jinlin; Huang, Tao; Liu, Hanfan

    2012-01-01

    Graphical abstract: By using CO as a reducing agent, uniform and well-defined concave tetrahedral Pd nanocrystals were successfully synthesized. CO flow rate was the most essential for the formation of the concave tetrahedral nanostructures. The morphologies and sizes of the final products can be well controlled by adjusting the flow rate of CO. Highlights: ► By using CO as a reducing agent, concave tetrahedral Pd nanocrystals were obtained. ► CO flow rate is critical to the formation of concave tetrahedral Pd nanocrystals. ► The selective adsorption of CO on (1 1 0) facets is essential to concave Pd tetrahedra. -- Abstract: CO reducing strategy to control the morphologies of palladium nanocrystals was investigated. By using CO as a reducing agent, uniform and well-defined concave tetrahedral Pd nanocrystals with a mean size of about 55 ± 2 nm were readily synthesized with Pd(acac) 2 as a precursor and PVP as a stabilizer. The structures of the as-prepared Pd nanocrystals were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), ultraviolet–visible (UV–vis) absorption spectroscopy and electrochemical measurements. The results demonstrated that CO was the most essential for the formation of the concave tetrahedral Pd nanostructures. The morphologies and sizes of the final products can be well controlled by adjusting the flow rate of CO. The most appropriate CO flow rate, temperature and time for the formation of the ideal concave tetrahedral Pd nanocrystals was 0.033 mL s −1 , 100 °C and 3 h, respectively.

  12. INTRODUCTION Outline of Round Tables Outline of Round Tables

    Science.gov (United States)

    Abarzhi, Snezhana I.; Sreenivasan, Katepalli R.

    2010-12-01

    -canonical" turbulent processes, identified problems which are most appealing to a broad international and interdisciplinary TMB community, focused on selecting quantitative criteria for the estimation of the quality and information capacity of experimental and numerical data sets, and outlined the needs and requirements for the TMB cyber-infrastructure. Upon intense discussions, participants of the Round Table agreed that it is still unclear if Kolmogorov turbulence is an observable physical phenomenon. Even for canonical (e.g. local, isotropic and homogeneous) turbulent flows the corrections to Kolmogorov theory are essential to incorporate. Several definitions of canonical turbulence were considered. It was noted that in a vast variety of realistic problems (under high and low energy density conditions from microscopic to astrophysical scales) the flow conditions depart from the assumptions of Kolmogorov theory. It is uncertain whether these distinctions can be completely accounted for with some higher-order corrections to Kolmogorov theory, whether such corrections are "continuous" or "singular", and whether their quantitative influence on the values of observables in a given parameter regime is small. It was stressed that in experiments on canonical turbulence the conditions of isotropy, locality and homogeneity are hard to achieve. Numerical simulations can open exciting avenues for accurate studies of fundamental theoretical issues provided their accuracy and dynamic range, requiring computations of peta-scale and higher levels, are satisfactory. Participants of the Round Table stressed that realistic turbulent processes depart from classical scenarios. They are characterized by sharp gradients of pressure and density, and may be subject to spatially varying and time-dependent acceleration, rotation and shocks, and are often influenced by diffusion of species, heat release and changes in chemical composition. Their sensitivity to details and transient character of the dynamics

  13. Availability of cosmetic treatment using novel cosmetics-based material on patients with craniofacial concavity.

    Science.gov (United States)

    Koyama, Shigeto; Kanetaka, Hiroyasu; Sagehashi, Yoshinori; Sasaki, Keiichi; Sato, Naoko

    2018-03-08

    Patients treated with maxillofacial prosthetics often experience emotional problems because of the remaining facial skin concavity such as a surgical scar. In such cases, cosmetic treatment can potentially correct their skin tone imperfections and deformities. This study aimed to evaluate the clinical availability of novel cosmetics-based material for craniofacial small concavity by initiating a cosmetic treatment in a preliminary case. Eighteen patients with aesthetic problems such as craniofacial deformities, small defects, and concavities on their faces underwent cosmetic treatment that was performed by makeup practitioners. Data were collected from the patient's charts and a survey questionnaire. A visual analog scale was used to conduct a survey regarding the satisfaction levels of the patients following cosmetic treatment with a novel cosmetics-based material. The cosmetic treatment was performed for a concavity on the left midface of a 67-year-old woman with partial maxillectomy. The novel cosmetics-based material was manufactured from a semi-translucent oil base. The satisfaction level of the patient increased after undergoing the cosmetic treatment. Regarding clinical applications, the novel cosmetics-based material can help reduce their cosmetic disturbance and restore the small deformity. These results suggest that the cosmetic treatment with the novel cosmetics-based material can be used as a subsidiary method for facial prostheses or an independent new method for correcting patients' small craniofacial concavity and for reducing visible deformity. Copyright © 2018 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  14. On the impact of a concave nosed axisymmetric body on a free surface

    Science.gov (United States)

    Mathai, Varghese; Govardhan, Raghuraman N.; Arakeri, Vijay H.

    2015-02-01

    We report on an experimental study of the vertical impact of a concave nosed axisymmetric body on a free surface. Previous studies have shown that bodies with a convex nose, like a sphere, produce a well defined splash with a relatively large cavity behind the model. In contrast, we find that with a concave nose, there is hardly a splash and the cavity extent is greatly reduced. This may be explained by the fact that in the concave nosed case, the initial impact is between a confined air pocket and the free surface unlike in the convex nosed case. From measurements of the unsteady pressure in the concave nose portion, we show that in this case, the maximum pressures are significantly lower than the classically expected "water hammer" pressures and also lower than those generally measured on other geometries. Thus, the presence of an air pocket in the case of a concave nosed body adds an interesting dimension to the classical problem of impact of solid bodies on to a free surface.

  15. Concave pulse shaping of a circularly polarized laser pulse from non-uniform overdense plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Hur, Min Sup [School of Natural Science, UNIST, BanYeon-Ri 100, Ulju-gun, Ulsan, 689-798 (Korea, Republic of); Kulagin, Victor V. [Sternberg Astronomical Institute, Moscow State University, Universitetsky prosp. 13, Moscow, 119992 (Russian Federation); Suk, Hyyong, E-mail: hysuk@gist.ac.kr [Department of Physics and Photon Science, GIST, 123 Cheomdan-gwangiro, Buk-gu, Gwangju, 500-712 (Korea, Republic of)

    2015-03-20

    Pulse shaping of circularly polarized laser pulses in nonuniform overdense plasmas are investigated numerically. Specifically we show by two-dimensional particle-in-cell simulations the generation of a concave pulse front of a circularly polarized, a few tens of petawatt laser pulse from a density-tapered, overdense plasma slab. The concept used for the transverse-directional shaping is the differential transmittance depending on the plasma density, and the laser intensity. For suitable selection of the slab parameters for the concave pulse shaping, we studied numerically the pulse transmittance, which can be used for further parameter design of the pulse shaping. The concavely shaped circularly polarized pulse is expected to add more freedom in controlling the ion-beam characteristics in the RPDA regime. - Highlights: • Laser pulse shaping for a concave front by non-uniform overdense plasma was studied. • Particle-in-cell (PIC) simulations were used for the investigation. • A laser pulse can be shaped by a density-tapered overdense plasma. • The concave and sharp pulse front are useful in many laser–plasma applications. • They are important for ion acceleration, especially in the radiation pressure dominant regime.

  16. National Environmental Outline 1997-2020. 4

    International Nuclear Information System (INIS)

    1997-01-01

    According to the Dutch Law on Environmental Protection ('Wet Milieubeheer') every four years an environmental outline is drafted as a preparation for the national environmental plan (NMP3). In a separate publication (the background document) a methodical and numerical basis and account is given by means of data and literature references of the environmental outline. This main report, the outline, comprises an analysis of the expected bottlenecks and an outline of a number of solutions in order to determine the effectiveness of the current policy by means of which targets must be realized and how future policy could solve the most important bottlenecks. refs

  17. Similar clinical benefits from below-target and target dose enalapril in patients with heart failure in the SOLVD Treatment trial.

    Science.gov (United States)

    Lam, Phillip H; Dooley, Daniel J; Fonarow, Gregg C; Butler, Javed; Bhatt, Deepak L; Filippatos, Gerasimos S; Deedwania, Prakash; Forman, Daniel E; White, Michel; Fletcher, Ross D; Arundel, Cherinne; Blackman, Marc R; Adamopoulos, Chris; Kanonidis, Ioannis E; Aban, Inmaculada B; Patel, Kanan; Aronow, Wilbert S; Allman, Richard M; Anker, Stefan D; Pitt, Bertram; Ahmed, Ali

    2018-02-01

    To examine associations of below-target and target dose of enalapril, an angiotensin-converting enzyme (ACE) inhibitor, with outcomes in patients with heart failure and reduced ejection fraction (HFrEF) in the Studies of Left Ventricular Dysfunction (SOLVD) Treatment trial. Two thousand five hundred and sixty-nine patients with HFrEF (ejection fraction ≤35%) were randomized to below-target (5-10 mg/day) dose placebo (n = 1284) or enalapril (n = 1285). One month post-randomization, blind up-titration to target (20 mg/day) dose was attempted for both study drugs in 2458 patients. Among the 1444 patients who achieved dose up-titration (placebo, n = 748; enalapril, n = 696; mean dose for both groups, 20.0 mg/day), target dose enalapril (vs. target dose placebo) was associated with a 9% absolute lower risk of the combined endpoint of heart failure hospitalization or all-cause mortality [adjusted hazard ratio (HR) 0.70; 95% confidence interval (CI) 0.60-0.81; P target dose (placebo, n = 486; enalapril, n = 528; mean dose for both groups, 8.8 mg/day), below-target dose enalapril (vs. below-target dose placebo) was associated with a 12% absolute lower risk of the combined endpoint of heart failure hospitalization or all-cause mortality (adjusted HR 0.68; 95% CI 0.57-0.81; P target (vs. below-target) dose had no association with the combined endpoint of heart failure hospitalization or all-cause mortality (adjusted HR 1.04; 95% CI 0.87-1.23; P = 0.695). In patients with HFrEF, the clinical benefits of ACE inhibitors appear to be similar at both below-target and target doses. © 2017 The Authors. European Journal of Heart Failure © 2017 European Society of Cardiology.

  18. Pt3Co concave nanocubes: synthesis, formation understanding, and enhanced catalytic activity toward hydrogenation of styrene.

    Science.gov (United States)

    Wang, Chenyu; Lin, Cuikun; Zhang, Lihua; Quan, Zewei; Sun, Kai; Zhao, Bo; Wang, Feng; Porter, Nathan; Wang, Yuxuan; Fang, Jiye

    2014-02-03

    We report a facile synthesis route to prepare high-quality Pt3Co nanocubes with a concave structure, and further demonstrate that these concave Pt3Co nanocubes are terminated with high-index crystal facets. The success of this preparation is highly dependent on an appropriate nucleation process with a successively anisotropic overgrowth and a preservation of the resultant high-index planes by control binding of oleyl-amine/oleic acid with a fine-tuned composition. Using a hydrogenation of styrene as a model reaction, these Pt3Co concave nanocubes as a new class of nanocatalysts with more open structure and active atomic sites located on their high-index crystallographic planes exhibit an enhanced catalytic activity in comparison with low-indexed surface terminated Pt3Co nanocubes in similar size. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Structural Health Monitoring of Tall Buildings with Numerical Integrator and Convex-Concave Hull Classification

    Directory of Open Access Journals (Sweden)

    Suresh Thenozhi

    2012-01-01

    Full Text Available An important objective of health monitoring systems for tall buildings is to diagnose the state of the building and to evaluate its possible damage. In this paper, we use our prototype to evaluate our data-mining approach for the fault monitoring. The offset cancellation and high-pass filtering techniques are combined effectively to solve common problems in numerical integration of acceleration signals in real-time applications. The integration accuracy is improved compared with other numerical integrators. Then we introduce a novel method for support vector machine (SVM classification, called convex-concave hull. We use the Jarvis march method to decide the concave (nonconvex hull for the inseparable points. Finally the vertices of the convex-concave hull are applied for SVM training.

  20. The Successor Function and Pareto Optimal Solutions of Cooperative Differential Systems with Concavity. I

    DEFF Research Database (Denmark)

    Andersen, Kurt Munk; Sandqvist, Allan

    1997-01-01

    We investigate the domain of definition and the domain of values for the successor function of a cooperative differential system x'=f(t,x), where the coordinate functions are concave in x for any fixed value of t. Moreover, we give a characterization of a weakly Pareto optimal solution.......We investigate the domain of definition and the domain of values for the successor function of a cooperative differential system x'=f(t,x), where the coordinate functions are concave in x for any fixed value of t. Moreover, we give a characterization of a weakly Pareto optimal solution....

  1. Heat transfer and forces on concave surfaces in free molecule flow.

    Science.gov (United States)

    Fan, C.

    1971-01-01

    A Monte Carlo modeling technique is described for mathematically simulating free molecular flows over a concave spherical surface and a concave cylindrical surface of finite length. The half-angle of the surfaces may vary from 0 to 90 degrees, and the incident flow may have an arbitrary speed ratio and an arbitrary angle of attack. Partial diffuse reflection and imperfect energy accommodation for molecules colliding with the surfaces are also considered. Results of heat transfer, drag and lift coefficients are presented for a variety of flow conditions. The present Monte Carlo results are shown to be in very good agreement with certain available theoretical solutions.

  2. Flow features that arise due to the interaction of a plane shock wave with concave profiles

    CSIR Research Space (South Africa)

    MacLucas, David A

    2012-10-01

    Full Text Available The focus of the author's thesis was the aerodynamic flow field that develops as a result of the interaction of a moving plane shock wave with concave profiles. In this presentation, he discusses some of the interesting flow phenomena that arise...

  3. [Design of flat field holographic concave grating for near-infrared spectrophotometer].

    Science.gov (United States)

    Xiang, Xian-Yi; Wen, Zhi-Yu

    2008-07-01

    Near-infrared spectrum analysis can be used to determine the nature or test quantitatively some chemical compositions by detecting molecular double frequency and multiple frequency absorption. It has been used in agriculture, biology, petrifaction, foodstuff, medicament, spinning and other fields. Near-infrared spectrophotometer is the main apparatus for near-infrared spectrum analysis, and the grating is the most important part of the apparatus. Based on holographic concave grating theory and optic design software CODE V, a flat field holographic concave grating for near-infrared spectrophotometer was designed from primary structure, which relied on global optimization of the software. The contradiction between wide spectrum bound and limited spectrum extension was resolved, aberrations were reduced successfully, spectrum information was utilized fully, and the optic structure of spectrometer was highly efficient. Using CODE V software, complex high-order aberration equations need not be solved, the result can be evaluated quickly, flat field and resolving power can be kept in balance, and the work efficiency is also enhanced. A paradigm of flat field holographic concave grating is given, it works between 900 nm to 1 700 nm, the diameter of the concave grating is 25 mm, and F/ # is 1. 5. The design result was analyzed and evaluated. It was showed that if the slit source, whose width is 50 microm, is used to reconstruction, the theoretic resolution capacity is better than 6.3 nm.

  4. Enhanced Absorption in Organic Thin-Films from Imprinted Concave Nanostructures

    Directory of Open Access Journals (Sweden)

    Arkadiusz Jarosław GOSZCZAK

    2017-02-01

    Full Text Available In this work, a rapid, replicable method for imprinting concave nanostructures to be used as functional light-trapping nanostructures in organic thin-films is presented. Porous anodic alumina templates were fabricated both by anodization of thick Al foils and by anodization of submicrometer thin Al films evaporated via e-beam evaporation on Si substrates. The template formation leads to natural patterning of the underlying Al layers that are used as rigid masters for stamp fabrication, after selective etching of the porous anodic alumina. PDMS stamps were made after replicating the Al concave patterns and used for imprinting of spin coated photoresist on glass substrates. We have investigated semi-periodic and aperiodic imprinted large concave patterns fabricated from rigid masters after anodization of Al in H3PO4. We show that metal covered imprinted concaves show enhancement in absorption that is attributed to field enhancement and diffuse scattering, leading to efficient light trapping for a selected active layer material (P3HT:PCBM.DOI: http://dx.doi.org/10.5755/j01.ms.23.1.14188

  5. Novel high-NA MRF toolpath supports production of concave hemispheres

    Science.gov (United States)

    Maloney, Chris; Supranowitz, Chris; Dumas, Paul

    2017-10-01

    Many optical system designs rely on high numerical aperture (NA) optics, including lithography and defense systems. Lithography systems require high-NA optics to image the fine patterns from a photomask, and many defense systems require the use of domes. The methods for manufacturing such optics with large half angles have often been treated as proprietary by most manufacturers due to the challenges involved. In the past, many high-NA concave surfaces could not be polished by magnetorheological finishing (MRF) due to collisions with the hardware underneath the polishing head. By leveraging concepts that were developed to enable freeform raster MRF capabilities, QED Technologies has implemented a novel toolpath to facilitate a new high-NA rotational MRF mode. This concept involves the use of the B-axis (rotational axis) in combination with a "virtual-axis" that utilizes the geometry of the polishing head. Hardware collisions that previously restricted the concave half angle limit can now be avoided and the new functionality has been seamlessly integrated into the software. This new MRF mode overcomes past limitations for polishing concave surfaces to now accommodate full concave hemispheres as well as extend the capabilities for full convex hemispheres. We discuss some of the previous limitations, and demonstrate the extended capabilities using this novel toolpath. Polishing results are used to qualify the new toolpath to ensure similar results to the "standard" rotational MRF mode.

  6. On the equivalence of the Choquet, pan- and concave integrals on finite spaces

    Czech Academy of Sciences Publication Activity Database

    Ouyang, Y.; Li, J.; Mesiar, Radko

    2017-01-01

    Roč. 456, č. 1 (2017), s. 151-162 ISSN 0022-247X Institutional support: RVO:67985556 Keywords : (M)-property * Choquet integral * Concave integral * Minimal atom * Monotone measure * Pan-integral Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 1.064, year: 2016 http://library.utia.cas.cz/separaty/2017/E/mesiar-0477091.pdf

  7. Nanoscale aluminum concaves for light-trapping in organic thin-films

    DEFF Research Database (Denmark)

    Goszczak, Arkadiusz Jaroslaw; Adam, Jost; Cielecki, Pawel Piotr

    2016-01-01

    Anodic aluminum oxide (AAO) templates, fabricated from oxalic acid and phosphoric acid, lead to non-periodic nanoscale concave structures in their underlying aluminum layer, which are investigated for their field-enhancement properties by applying a thin-film polymer coating based laser ablation...

  8. Processing convexity and concavity along a 2-D contour: figure-ground, structural shape, and attention.

    Science.gov (United States)

    Bertamini, Marco; Wagemans, Johan

    2013-04-01

    Interest in convexity has a long history in vision science. For smooth contours in an image, it is possible to code regions of positive (convex) and negative (concave) curvature, and this provides useful information about solid shape. We review a large body of evidence on the role of this information in perception of shape and in attention. This includes evidence from behavioral, neurophysiological, imaging, and developmental studies. A review is necessary to analyze the evidence on how convexity affects (1) separation between figure and ground, (2) part structure, and (3) attention allocation. Despite some broad agreement on the importance of convexity in these areas, there is a lack of consensus on the interpretation of specific claims--for example, on the contribution of convexity to metric depth and on the automatic directing of attention to convexities or to concavities. The focus is on convexity and concavity along a 2-D contour, not convexity and concavity in 3-D, but the important link between the two is discussed. We conclude that there is good evidence for the role of convexity information in figure-ground organization and in parsing, but other, more specific claims are not (yet) well supported.

  9. Pierce-type electron gun with a large concave LaB6 cathode

    International Nuclear Information System (INIS)

    Shintake, Tumoru; Ohba, Kunio; Matoba, Masaru; Katase, Akira

    1981-01-01

    A Pierce-type electron gun with a concave cathode of lanthanum hexaboride (LaB 6 ) 30 mm in diameter is described. At an accelerating voltage of 3 kV and a cathode temperature of 1340 0 C, a focussed electron beam of DC 300 mA was obtained. (author)

  10. The Scallop's Eye--A Concave Mirror in the Context of Biology

    Science.gov (United States)

    Colicchia, Giuseppe; Waltner, Christine; Hopf, Martin; Wiesner, Hartmut

    2009-01-01

    Teaching physics in the context of medicine or biology is a way to generate students' interest in physics. A more uncommon type of eye, the scallop's eye (an eye with a spherical concave mirror, which is similar to a Newtonian or Schmidt telescope) and the image-forming mechanism in this eye are described. Also, a simple eye model, which can…

  11. On the impact of a concave nosed axisymmetric body on a free surface

    NARCIS (Netherlands)

    Mathai, Varghese; Govardhan, R.N.; Arakeri, V.H.

    2015-01-01

    We report on an experimental study of the vertical impact of a concave nosed axisymmetric body on a free surface. Previous studies have shown that bodies with a convex nose, like a sphere, produce a well defined splash with a relatively large cavity behind the model. In contrast, we find that with a

  12. Singular elliptic systems involving concave terms and critical Caffarelli-Kohn-Nirenberg exponents

    Directory of Open Access Journals (Sweden)

    Mohammed E. O. El Mokhtar

    2012-03-01

    Full Text Available In this article, we establish the existence of at least four solutions to a singular system with a concave term, a critical Caffarelli-Kohn-Nirenberg exponent, and sign-changing weight functions. Our main tools are the Nehari manifold and the mountain pass theorem.

  13. Outline of Swedish activities on LWR fuel

    Energy Technology Data Exchange (ETDEWEB)

    Grounes, M [Studsvik Nuclear, Nykoeping (Sweden); Roennberg, G [OKG AB (Sweden)

    1997-12-01

    The presentation outlines the Swedish activities on LWR fuel and considers the following issues: electricity production; performance of operating nuclear power plants; nuclear fuel cycle and waste management; research and development in nuclear field. 4 refs, 4 tabs.

  14. Navier-Stokes Computations With One-Equation Turbulence Model for Flows Along Concave Wall Surfaces

    Science.gov (United States)

    Wang, Chi R.

    2005-01-01

    This report presents the use of a time-marching three-dimensional compressible Navier-Stokes equation numerical solver with a one-equation turbulence model to simulate the flow fields developed along concave wall surfaces without and with a downstream extension flat wall surface. The 3-D Navier- Stokes numerical solver came from the NASA Glenn-HT code. The one-equation turbulence model was derived from the Spalart and Allmaras model. The computational approach was first calibrated with the computations of the velocity and Reynolds shear stress profiles of a steady flat plate boundary layer flow. The computational approach was then used to simulate developing boundary layer flows along concave wall surfaces without and with a downstream extension wall. The author investigated the computational results of surface friction factors, near surface velocity components, near wall temperatures, and a turbulent shear stress component in terms of turbulence modeling, computational mesh configurations, inlet turbulence level, and time iteration step. The computational results were compared with existing measurements of skin friction factors, velocity components, and shear stresses of the developing boundary layer flows. With a fine computational mesh and a one-equation model, the computational approach could predict accurately the skin friction factors, near surface velocity and temperature, and shear stress within the flows. The computed velocity components and shear stresses also showed the vortices effect on the velocity variations over a concave wall. The computed eddy viscosities at the near wall locations were also compared with the results from a two equation turbulence modeling technique. The inlet turbulence length scale was found to have little effect on the eddy viscosities at locations near the concave wall surface. The eddy viscosities, from the one-equation and two-equation modeling, were comparable at most stream-wise stations. The present one

  15. Manipulating the kinetics of seeded growth for edge-selective metal deposition and the formation of concave au nanocrystals.

    Science.gov (United States)

    Laskar, Moitree; Zhong, Xiaolan; Li, Zhi-Yuan; Skrabalak, Sara E

    2013-10-01

    By manipulating the kinetics of seeded growth through judicious control of reaction conditions, edge-selective metal deposition can be achieved to synthesize new Au nanostructures with face-centered concavities, referred to herein as Au overgrown trisoctahedra. These nanostructures display higher sensitivity to changes in refractive index compared to both Au traditional trisoctahedra and the Au nanocube seeds from which they are grown. Often, concave nanostructures are achieved by selective etching processes or corner-selective overgrowth and adopt a stellated profile rather than a profile with face-centered concavities. The presented results illustrate another strategy toward concave nanostructures and can facilitate the synthesis of new concave nanostructures for applications in catalysis and chemical sensing. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. The near-field acoustic levitation for spheres by transducer with concave spherical radiating surface

    International Nuclear Information System (INIS)

    Liu, Jian Fang; Sun, Xu Guang; Jiao, Xiao Yang; Chen, Hong Xia; Hua, Shun Ming; Zhang, Hong Chun

    2013-01-01

    To levitate ICF target spheres in the near-field acoustic levitation, a transducer with concave spherical radiating surface and a nearfield acoustic levitation system is established. The concave spherical radiating surface of the transducer is designed by the finite element parametric method. Then the levitation height and levitation perturbation of spheres with different mass and diameters in the near-field acoustic levitation system are tested and discussed in the driving voltage at 400V, 500V and 600V, respectively, when the levitation system is under the resonant frequency. Finally, based on the experimental results, the height formula of the near-field acoustic levitation for spheres is deduced by introducing a coupling coefficient.

  17. Reproducible and recyclable SERS substrates: Flower-like Ag structures with concave surfaces formed by electrodeposition

    Science.gov (United States)

    Bian, Juncao; Shu, Shiwei; Li, Jianfu; Huang, Chao; Li, Yang Yang; Zhang, Rui-Qin

    2015-04-01

    Direct synthesis of three-dimensional Ag structures on solid substrates for the purposes of producing reproducible and recyclable surface-enhanced Raman scattering (SERS) applications remains challenging. In this work, flower-like Ag structures with concave surfaces (FACS) were successfully electrodeposited onto ITO glass using the double-potentiostatic method. The FACS, with an enhancement factor of the order of 108, exhibited a SERS signal intensity 3.3 times stronger than that measured from Ag nanostructures without concave surfaces. A cleaning procedure involving lengthy immersion of the sample in ethanol and KNO3 was proposed to recycle the substrate and confirmed by using rhodamine 6G, adenine, and 4-aminothiophenol as target molecules. The findings can help to advance the practical applications of Ag nanostructure-based SERS substrates.

  18. A facile method to fabricate close-packed concave microlens array on cylindrical glass

    International Nuclear Information System (INIS)

    Deng, Zefang; Chen, Feng; Yang, Qing; Liu, Hewei; Bian, Hao; Du, Guangqing; Hu, Yang; Si, Jinhai; Meng, Xiangwei; Hou, Xun

    2012-01-01

    This work presents a facile method to fabricate concave microlens arrays (MLAs) with controllable shape and high fill factor on cylindrical silica glass by a femtosecond laser-enhanced chemical wet etching process. The hexagonal and rectangular MLAs are flexibly fabricated on the silica glass cylinder with a diameter of 3 mm. The morphological characteristics of MLAs are measured by a scanning electron microscope and a laser scanning confocal microscope. The measurements show that the good uniformity and high packing density MLA structures are generated. It has also been demonstrated that the shape and size of the concave structures could be easily tuned by changing laser power and the arrangement of laser exposure spots. The convex MLAs replicated by the polymer casting method experience excellent image quality. (paper)

  19. Concave utility, transaction costs, and risk in measuring discounting of delayed rewards.

    Science.gov (United States)

    Kirby, Kris N; Santiesteban, Mariana

    2003-01-01

    Research has consistently found that the decline in the present values of delayed rewards as delay increases is better fit by hyperbolic than by exponential delay-discounting functions. However, concave utility, transaction costs, and risk each could produce hyperbolic-looking data, even when the underlying discounting function is exponential. In Experiments 1 (N = 45) and 2 (N = 103), participants placed bids indicating their present values of real future monetary rewards in computer-based 2nd-price auctions. Both experiments suggest that utility is not sufficiently concave to account for the superior fit of hyperbolic functions. Experiment 2 provided no evidence that the effects of transaction costs and risk are large enough to account for the superior fit of hyperbolic functions.

  20. The near-field acoustic levitation for spheres by transducer with concave spherical radiating surface

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jian Fang; Sun, Xu Guang; Jiao, Xiao Yang; Chen, Hong Xia [Jilin University, Changchun (China); Hua, Shun Ming [Zhejiang University, Ningbo (China); Zhang, Hong Chun [Aviation University of AirForce, Changchun (China)

    2013-02-15

    To levitate ICF target spheres in the near-field acoustic levitation, a transducer with concave spherical radiating surface and a nearfield acoustic levitation system is established. The concave spherical radiating surface of the transducer is designed by the finite element parametric method. Then the levitation height and levitation perturbation of spheres with different mass and diameters in the near-field acoustic levitation system are tested and discussed in the driving voltage at 400V, 500V and 600V, respectively, when the levitation system is under the resonant frequency. Finally, based on the experimental results, the height formula of the near-field acoustic levitation for spheres is deduced by introducing a coupling coefficient.

  1. Surface tension-induced high aspect-ratio PDMS micropillars with concave and convex lens tips

    KAUST Repository

    Li, Huawei

    2013-04-01

    This paper reports a novel method for the fabrication of 3-dimensional (3D) Polydimethylsiloxane (PDMS) micropillars with concave and convex lens tips in a one-step molding process, using a CO2 laser-machined Poly(methyl methacrylate) (PMMA) mold with through holes. The PDMS micropillars are 4 mm high and have an aspect ratio of 251. The micropillars are formed by capillary force drawing up PDMS into the through hole mold. The concave and convex lens tips of the PDMS cylindrical micropillars are induced by surface tension and are controllable by changing the surface wetting properties of the through holes in the PMMA mold. This technique eliminates the requirements of expensive and complicated facilities to prepare a 3D mold, and it provides a simple and rapid method to fabricate 3D PDMS micropillars with controllable dimensions and tip shapes. © 2013 IEEE.

  2. Au@Pd core-shell nanobricks with concave structures and their catalysis of ethanol oxidation.

    Science.gov (United States)

    Wang, Wenjin; Zhang, Jie; Yang, Shengchun; Ding, Bingjun; Song, Xiaoping

    2013-10-01

    Au@Pd core-shell nanobricks (CNBs) with concave surfaces and Pd shells with a thickness of approximately 5 nm were synthesized by co-reduction of HAuCl4 and H2 PdCl4 in the presence of Au seeds and Ag ions. These as-synthesized concave CNBs exhibit significantly enhanced catalytic activity for the electrooxidation of ethanol in alkaline media compared to the commercially-used Pd black. The improved performance of the Au@Pd CNBs can be attributed to the exposed stepped surfaces, high-index facets, and the synergistic effects of the core and shell metals. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Surface tension-induced high aspect-ratio PDMS micropillars with concave and convex lens tips

    KAUST Repository

    Li, Huawei; Fan, Yiqiang; Yi, Ying; Foulds, Ian G.

    2013-01-01

    This paper reports a novel method for the fabrication of 3-dimensional (3D) Polydimethylsiloxane (PDMS) micropillars with concave and convex lens tips in a one-step molding process, using a CO2 laser-machined Poly(methyl methacrylate) (PMMA) mold with through holes. The PDMS micropillars are 4 mm high and have an aspect ratio of 251. The micropillars are formed by capillary force drawing up PDMS into the through hole mold. The concave and convex lens tips of the PDMS cylindrical micropillars are induced by surface tension and are controllable by changing the surface wetting properties of the through holes in the PMMA mold. This technique eliminates the requirements of expensive and complicated facilities to prepare a 3D mold, and it provides a simple and rapid method to fabricate 3D PDMS micropillars with controllable dimensions and tip shapes. © 2013 IEEE.

  4. Collision and interaction phenomena - a historical outline

    International Nuclear Information System (INIS)

    Radmaneche, R.

    1977-09-01

    Collisions and interactions have become important for the description of matter. The author presents an outline which deals with elastic and inelastic collisions, with strong interactions, electromagnetic interactions, weak interactions and gravitational interactions. It is shown that the description of such processes has developed parallel with the understanding of matter and with the mechanism of the phenomena. Current and unsolved problems are mentioned

  5. Curriculum Outline for Tennessee Transition Model.

    Science.gov (United States)

    Esch, B. J.

    This curriculum outline for the Sevier County, Tennessee, transition program for special needs students provides goals and objectives for the following domains: domestic, vocational, community functioning, and recreation/leisure. The domestic domain covers personal hygiene/grooming, first aid, home nursing, birth control/pregnancy, parenting, drug…

  6. An outline review of numerical transport methods

    International Nuclear Information System (INIS)

    Budd, C.

    1981-01-01

    A brief review is presented of numerical methods for solving the neutron transport equation in the context of reactor physics. First the various forms of transport equation are given. Second, the various ways of classifying numerical transport methods are discussed. Finally each method (or class of methods) is outlined in turn. (U.K.)

  7. Youth Unemployment Outline of a Psychosocial Perspective

    Science.gov (United States)

    Stamm, Margrit

    2006-01-01

    This analysis of education policy constitutes an attempt to outline the problem of youth unemployment. Building on a recognition that structural change in the "society of labourers" has also affected the social entity "young people", it shows the problems inherent in our concept of linear transitions to working life and the…

  8. Outline of High School Credit Courses.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia.

    An outline is presented of the objectives and content of courses offered for credit in high schools in South Carolina. Courses in the following subjects are described: (1) art; (2) drama; (3) driver education; (4) environmental education; (5) foreign language: French, German, Russian, Spanish; (6) health; (7) language arts; (8) mathematics; (9)…

  9. Outlet strut fracture and leaflet escape of Bjork-Shiley convexo-concave valve.

    Science.gov (United States)

    Uchino, Gaku; Yoshida, Hideo; Sakoda, Naoya; Hattori, Shigeru; Kawabata, Takuya; Saiki, Munehiro; Fujita, Yasufumi; Yunoki, Keiji; Hisamochi, Kunikazu; Mine, Yoshinari

    2017-06-01

    Prosthetic valve fracture is a serious complication and may arise in patient post-valve replacement. We experienced an outlet strut fracture and leaflet escape of a Bjork-Shiley convexo-concave valve. We performed an emergency redo mitral valve replacement and successfully retrieved the fractured strut and escaped leaflet from superficial femoral artery and the abdominal aorta. The patient showed an uneventful postoperative recovery.

  10. Feedback-Capacity of Degraded Gaussian Vector BC using Directed Information and Concave Envelopes

    OpenAIRE

    Ramachandran, Viswanathan

    2017-01-01

    It is known that the capacity region of a two user physically degraded discrete memoryless (DM) broadcastchannel (BC) is not enlarged by feedback. An identical result holds true for a physically degraded Gaussian BC,established later using a variant of the Entropy Power Inequality (EPI). In this paper, we extend the latter resultto a physically degraded Gaussian Vector BC (PD-GVBC). However, the extension is not EPI based, but employs arecent result on the factorization of concave envelopes. ...

  11. Visualizing RNA Secondary Structure Base Pair Binding Probabilities using Nested Concave Hulls

    OpenAIRE

    Sansen , Joris; Bourqui , Romain; Thebault , Patricia; Allali , Julien; Auber , David

    2015-01-01

    International audience; The challenge 1 of the BIOVIS 2015 design contest consists in designing an intuitive visual depiction of base pairs binding probabilities for secondary structure of ncRNA. Our representation depicts the potential nucleotide pairs binding using nested concave hulls over the computed MFE ncRNA secondary structure. Thus, it allows to identify regions with a high level of uncertainty in the MFE computation and the structures which seem to match to reality.

  12. Environmental protection stability of river bed and banks using convex, concave, and linear bed sills.

    Science.gov (United States)

    Keshavarzi, Alireza; Noori, Lila Khaje

    2010-12-01

    River bed scourings are a major environmental problem for fish and aquatic habitat resources. In this study, to prevent river bed and banks from scouring, different types of bed sills including convex, concave and linear patterns were installed in a movable channel bed in a laboratory flume. The bed sills were tested with nine different arrangements and under different flow conditions. To find the most effective bed sill pattern, the scouring depth was measured downstream of the bed sill for a long experimental duration. The scour depth was measured at the middle and at the end of each experimental test for different ratios of the arch radius to the channel width [r/w]. The experimental results indicated that the convex pattern with r/w=0.35 produced minimum bed scouring depth at the center line whereas the concave pattern with r/w=0.23 produced the minimum scour depth at the wall banks. Therefore, the convex pattern was the most effective configuration for prevention of scouring at the center line of the river while the concave pattern was very effective to prevent scouring at the river banks. These findings can be suggested to be used in practical applications.

  13. A Lower Bound on the Differential Entropy of Log-Concave Random Vectors with Applications

    Directory of Open Access Journals (Sweden)

    Arnaud Marsiglietti

    2018-03-01

    Full Text Available We derive a lower bound on the differential entropy of a log-concave random variable X in terms of the p-th absolute moment of X. The new bound leads to a reverse entropy power inequality with an explicit constant, and to new bounds on the rate-distortion function and the channel capacity. Specifically, we study the rate-distortion function for log-concave sources and distortion measure d ( x , x ^ = | x − x ^ | r , with r ≥ 1 , and we establish that the difference between the rate-distortion function and the Shannon lower bound is at most log ( π e ≈ 1 . 5 bits, independently of r and the target distortion d. For mean-square error distortion, the difference is at most log ( π e 2 ≈ 1 bit, regardless of d. We also provide bounds on the capacity of memoryless additive noise channels when the noise is log-concave. We show that the difference between the capacity of such channels and the capacity of the Gaussian channel with the same noise power is at most log ( π e 2 ≈ 1 bit. Our results generalize to the case of a random vector X with possibly dependent coordinates. Our proof technique leverages tools from convex geometry.

  14. Assessment of CHF enhancement mechanisms in a curved, rectangular channel subjected to concave heating

    International Nuclear Information System (INIS)

    Sturgis, J.C.; Mudawar, I.

    1999-01-01

    An experimental study was undertaken to examine the enhancement in critical heat flux (CHF) provided by streamwise curvature. Curved and straight rectangular flow channels were fabricated with identical 5.0 x 2.5 mm cross sections and heated lengths of 101.6 mm in which the heat was applied to only one wall--the concave wall (32.3 mm radius) in the curved channel and a side wall in the straight. Tests were conducted using FC-72 liquid with mean inlet velocity and outlet subcooling of 0.25 to 10 m s -1 and 3 to 29 C, respectively. Centripetal acceleration for curved flow reached 315 times earth's gravitational acceleration. Critical heat flux was enhanced due to flow curvature at all conditions but the enhancement decreased with increasing subcooling. For near-saturated conditions, the enhancement was approximately 60% while for highly subcooled flow it was only 20%. The causes for the enhancement were identified as (1) increased pressure on the liquid-vapor interface at wetting fronts, (2) buoyancy forces and (3) increased subcooling at the concave wall. Flow visualization tests were conducted in transparent channels to explore the role of buoyancy forces in enhancing the critical heat flux. These forces were observed to remove vapor from the concave wall and distribute it throughout the cross section. Vapor removal was only effective at near-saturated conditions, yielding the observed substantial enhancement in CHF relative to the straight channel

  15. Integration of polystyrene microlenses with both convex and concave profiles in a polymer-based microfluidic system

    KAUST Repository

    Fan, Yiqiang; Li, Huawei; Foulds, Ian G.

    2013-01-01

    This paper reports a new technique of fabricating polystyrene microlenses with both convex and concave profiles that are integrated in polymer-based microfluidic system. The polystyrene microlenses, or microlens array, are fabricated using the free

  16. Designing evaluation of learning in outline courses

    Directory of Open Access Journals (Sweden)

    Estévez, Orosmán V.

    2010-07-01

    Full Text Available This paper is intended to characterize the evaluation process of online courses from the perspectives of several scholars who are currently conducting research on the topic. The importance of an integral diagnosis and the interconnections between diagnosis, learning activities design and evaluation are outlined. The study leads the authors to the conclusion that evaluation in online courses in Cuba demands a thorough scientific research so as to go deeper into its characterizing features.

  17. Gait recognition based on integral outline

    Science.gov (United States)

    Ming, Guan; Fang, Lv

    2017-02-01

    Biometric identification technology replaces traditional security technology, which has become a trend, and gait recognition also has become a hot spot of research because its feature is difficult to imitate and theft. This paper presents a gait recognition system based on integral outline of human body. The system has three important aspects: the preprocessing of gait image, feature extraction and classification. Finally, using a method of polling to evaluate the performance of the system, and summarizing the problems existing in the gait recognition and the direction of development in the future.

  18. Outline and operations of benzene plant

    Energy Technology Data Exchange (ETDEWEB)

    Omori, S; Hirooka, N; Nakamura, M; Goto, T

    1983-01-01

    An account is given of plant which can process 130,000 tonnes of by-product coke oven gas light oil (GLO) per year (via hydrodesulfurization, extraction and distillation) to produce benzene, toluene and xylene. The flowsheets and component equipment of the various production processes are explained, together with special features such as the production of hydrogen from coke oven gas by the PSA process and the processing of GLO by the ARCO process. Plant operation is outlined and the results of performance tests are noted.

  19. ITER-FEAT outline design report

    International Nuclear Information System (INIS)

    2001-01-01

    In July 1998 the ITER Parties were unable, for financial reasons, to proceed with construction of the ITER design proposed at that time, to meet the detailed technical objectives and target cost set in 1992. It was therefore decided to investigate options for the design of ITER with reduced technical objectives and with possibly decreased technical margins, whose target construction cost was one half that of the 1998 ITER design, while maintaining the overall programmatic objective. To identify designs that might meet the revised objectives, task forces involving the JCT and Home Teams met during 1998 and 1999 to analyse and compare a range of options for the design of such a device. This led at the end of 1999 to a single configuration for the ITER design with parameters considered to be the most credible consistent with technical limitations and the financial target, yet meeting fully the objectives with appropriate margins. This new design of ITER, called ''ITER-FEAT'', was submitted to the ITER Director to the ITER Parties as the ''ITER-FEAT Outline Design Report'' (ODR) in January 2000, at their meeting in Tokyo. The Parties subsequently conducted their domestic assessments of this report and fed the resulting comments back into the progressing design. The progress on the developing design was reported to the ITER Technical Advisory Committee (TAC) in June 2000 in the report ''Progress in Resolving Open Design Issues from the ODR'' alongside a report on Progress in Technology R and D for ITER. In addition, the progress in the ITER-FEAT Design and Validating R and D was reported to the ITER Parties. The ITER-FEAT design was subsequently approved by the governing body of ITER in Moscow in June 2000 as the basis for the preparation of the Final Design Report, recognising it as a single mature design for ITER consistent with its revised objectives. This volume contains the documents pertinent to the process described above. More detailed technical information

  20. Electron optical characteristics of a concave electrostatic electron mirror for a scanning electron microscope

    International Nuclear Information System (INIS)

    Hamarat, R.T.; Witzani, J.; Hoerl, E.M.

    1984-08-01

    Numerical computer calculations are used to explore the design characteristics of a concave electrostatic electron mirror for a mirror attachment for a conventional scanning electron microscope or an instrument designed totally as a scanning electron mirror microscope. The electron paths of a number of set-ups are calculated and drawn graphically in order to find the optimum shape and dimensions of the mirror geometry. This optimum configuration turns out to be the transition configuration between two cases of electron path deflection, towards the optical axis of the system and away from it. (Author)

  1. Inference from concave stochastic frontiers and the covariance of firm efficiency measures across firms

    International Nuclear Information System (INIS)

    Dashti, Imad

    2003-01-01

    This paper uses a Bayesian stochastic frontier model to obtain confidence intervals on firm efficiency measures of electric utilities rather than the point estimates reported in most previous studies. Results reveal that the stochastic frontier model yields imprecise measures of firm efficiency. However, the application produces much more precise inference on pairwise efficiency comparisons of firms due to a sometimes strong positive covariance of efficiency measures across firms. In addition, we examine the sensitivity to functional form by repeating the analysis for Cobb-Douglas, translog and Fourier frontiers, with and without imposing monotonicity and concavity

  2. Outlining a typology of sports coaching careers

    DEFF Research Database (Denmark)

    Christensen, Mette Krogh

    2014-01-01

    This paper aims to extend our understanding of sports coaching careers and challenge related stage-based models by outlining and describing a typology of careers in high-performance sports coaching. A constructivist research approach is applied that intends to gain insight into the realities...... of coaches’ careers.Datawere drawn fromin-depth interviews with 10 Danish high-performance sports coaches. Results identified four classifying features that pave the way for the establishment of a typology consisting of three ideal types: (1) the elite-athlete coach; (2) the academic coach; and (3) the early......-starter coach. The findings are theorized throughWenger’s concept of paradigmatic pathways and Bourdieu’s concept of cultural capital. The study illuminates paradigmatic trajectories and conversions of cultural capital in high-performance sports coaching careers that may act as models for young athletes...

  3. Outline of physical protection exercise field

    International Nuclear Information System (INIS)

    Kawata, Norio; Wakabayashi, Shuji; Naito, Aisaku

    2012-01-01

    The Integrated Support Center for Nuclear Nonproliferation and Nuclear Security (ISCN) of the Japan Atomic Energy Agency set up exercise facilities for trainee of nuclear power emerging countries in Asia involved in Physical Protection (PP) including government officers in charge of nuclear security policy or nuclear security regulation, planning and management staff of PP facilities of operating companies, design professionals for PP facilities, and security personnel responsible for PP. After April in 2012, the facility started to be applied to actual ISCN's PP training and is expected as training field for not only Asian nuclear emerging country but also domestic nuclear energy companies and regulatory bodies. In order to provide effective and practical exercises, we set up the training facilities with basic measures and equipment typical of those used in actual PP facilities, e.g., protective fences, sensors, and cameras. This paper provides an outline of the facilities. (author)

  4. Partial null astigmatism-compensated interferometry for a concave freeform Zernike mirror

    Science.gov (United States)

    Dou, Yimeng; Yuan, Qun; Gao, Zhishan; Yin, Huimin; Chen, Lu; Yao, Yanxia; Cheng, Jinlong

    2018-06-01

    Partial null interferometry without using any null optics is proposed to measure a concave freeform Zernike mirror. Oblique incidence on the freeform mirror is used to compensate for astigmatism as the main component in its figure, and to constrain the divergence of the test beam as well. The phase demodulated from the partial nulled interferograms is divided into low-frequency phase and high-frequency phase by Zernike polynomial fitting. The low-frequency surface figure error of the freeform mirror represented by the coefficients of Zernike polynomials is reconstructed from the low-frequency phase, applying the reverse optimization reconstruction technology in the accurate model of the interferometric system. The high-frequency surface figure error of the freeform mirror is retrieved from the high-frequency phase adopting back propagating technology, according to the updated model in which the low-frequency surface figure error has been superimposed on the sag of the freeform mirror. Simulations verified that this method is capable of testing a wide variety of astigmatism-dominated freeform mirrors due to the high dynamic range. The experimental result using our proposed method for a concave freeform Zernike mirror is consistent with the null test result employing the computer-generated hologram.

  5. Hydrogen storage in pure and Li-doped carbon nanopores: combined effects of concavity and doping.

    Science.gov (United States)

    Cabria, I; López, M J; Alonso, J A

    2008-04-14

    Density functional calculations are reported for the adsorption of molecular hydrogen on carbon nanopores. Two models for the pores have been considered: (i) The inner walls of (7,7) carbon nanotubes and (ii) the highly curved inner surface of nanotubes capped on one end. The effect of Li doping is investigated in all cases. The hydrogen physisorption energies increase due to the concavity effect inside the clean nanotubes and on the bottom of the capped nanotubes. Li doping also enhances the physisorption energies. The sum of those two effects leads to an increase by a factor of almost 3 with respect to the physisorption in the outer wall of undoped nanotubes and in flat graphene. Application of a quantum-thermodynamical model to clean cylindrical pores of diameter 9.5 A, the diameter of the (7,7) tube, indicates that cylindrical pores of this size can store enough hydrogen to reach the volumetric and gravimetric goals of the Department of Energy at 77 K and low pressures, although not at 300 K. The results are useful to explain the experiments on porous carbons. Optimizations of the pore size, concavity, and doping appear as promising alternatives for achieving the goals at room temperature.

  6. Experimental study of curvature effects on jet impingement heat transfer on concave surfaces

    Directory of Open Access Journals (Sweden)

    Ying Zhou

    2017-04-01

    Full Text Available Experimental study of the local and average heat transfer characteristics of a single round jet impinging on the concave surfaces was conducted in this work to gain in-depth knowledge of the curvature effects. The experiments were conducted by employing a piccolo tube with one single jet hole over a wide range of parameters: jet Reynolds number from 27000 to 130000, relative nozzle to surface distance from 3.3 to 30, and relative surface curvature from 0.005 to 0.030. Experimental results indicate that the surface curvature has opposite effects on heat transfer characteristics. On one hand, an increase of relative nozzle to surface distance (increasing jet diameter in fact enhances the average heat transfer around the surface for the same curved surface. On the other hand, the average Nusselt number decreases as relative nozzle to surface distance increases for a fixed jet diameter. Finally, experimental data-based correlations of the average Nusselt number over the curved surface were obtained with consideration of surface curvature effect. This work contributes to a better understanding of the curvature effects on heat transfer of a round jet impingement on concave surfaces, which is of high importance to the design of the aircraft anti-icing system.

  7. Outline of cold nuclear fusion reaction

    International Nuclear Information System (INIS)

    Tachikawa, Enzo

    1991-01-01

    In 2010, as the total supply capacity of primary energy, 666 million liter is anticipated under the measures of thorough energy conservation. The development of energy sources along the energy policy based on environment preservation, safety, the quantity of resources and economy is strongly demanded. The nuclear power generation utilizing nuclear fission has been successfully carried out. As the third means of energy production, the basic research and technical development have been actively advanced on the energy production utilizing nuclear fusion reaction. The main object of the nuclear fusion research being advanced now is D-D reaction and D-T reaction. In order to realize low temperature nuclear fusion reaction, muon nuclear fusion has been studied so far. The cold nuclear fusion reaction by the electrolysis of heavy water has been reported in 1989, and its outline is ixplained in this report. The trend of the research on cold nuclear fusion is described. But the possibility of cold nuclear fusion as an energy source is almost denied. (K.I.)

  8. Integration of polystyrene microlenses with both convex and concave profiles in a polymer-based microfluidic system

    KAUST Repository

    Fan, Yiqiang

    2013-12-20

    This paper reports a new technique of fabricating polystyrene microlenses with both convex and concave profiles that are integrated in polymer-based microfluidic system. The polystyrene microlenses, or microlens array, are fabricated using the free-surface thermal compression molding method. The laser fabricated poly(methyl methacrylate) (PMMA) sheet is used as the mold for the thermal compression molding process. With different surface treatment methods of the PMMA mold, microlenses with either convex or concave profiles could be achieved during the thermal molding process. By integrating the microlenses in the microfluidic systems, observing the flow inside the microchannels is easier. This new technique is rapid, low cost, and it does not require cleanroom facilities. Microlenses with both convex and concave profiles can be easily fabricated and integrated in microfluidic system with this technique. © 2013 Springer-Verlag Berlin Heidelberg.

  9. Modeling of Focused Acoustic Field of a Concave Multi-annular Phased Array Using Spheroidal Beam Equation

    Science.gov (United States)

    Yu, Li-Li; Shou, Wen-De; Hui, Chun

    2012-02-01

    A theoretical model of focused acoustic field for a multi-annular phased array on concave spherical surface is proposed. In this model, the source boundary conditions of the spheroidal beam equation (SBE) for multi-annular phased elements are studied. Acoustic field calculated by the dynamic focusing model of SBE is compared with numerical results of the O'Neil and Khokhlov—Zabolotskaya—Kuznetsov (KZK) model, respectively. Axial dynamic focusing and the harmonic effects are presented. The results demonstrate that the dynamic focusing model of SBE is good valid for a concave multi-annular phased array with a large aperture angle in the linear or nonlinear field.

  10. Elective removal of convexo-concave Björk-Shiley valves.

    Science.gov (United States)

    Rajesh, P B; Smith, G H; Lawford, P V; Black, M M

    1994-08-01

    Replacement has been an accepted method for treating advanced cardiac valvular disease for more than 25 years. However, the perfect prosthesis has yet to be developed, judging by the number of devices available. A prosthesis that initially appears promising may cause problems in due course, and indeed some devices have been modified or withdrawn from clinical use. A notable example of a prosthetic valve that has give problems is the Björk-Shiley convexo-concave prosthesis, some models of which have undergone mechanical failure due to strut fracture. We report the elective removal of such a valve and the subsequent examination of the prosthesis. The results of this examination suggest that a policy of elective removal is justified.

  11. Self-centring technique for fibre optic microlens mounting using a concave cone-etched fibre

    International Nuclear Information System (INIS)

    Demagh, Nacer-Eddine; Guessoum, Assia; Zegari, Rabah; Gharbi, Tijani

    2011-01-01

    Several techniques of centring a microlens onto the fibre optic end face are studied. In most of them, microsphere lenses are centred with the aid of high-accuracy micro-positioners. This process is complicated with regard to the difficulty in manipulating microsphere lenses. In this paper, a simple and accurate self-centring method for mounting microsphere lenses using a concave cone etched fibre (Demagh et al 2006 Meas. Sci. Technol. 17 119–22) is described. This technique allows the centring of a wide variety of microlens radii, typically 7 µm to over 24 µm. The proposed process, however, is not affected by any spatial positioning control of microspheres. In over 85% of the attempts, the microsphere lenses were centred on the fibre axis to within 0.12 µm

  12. Bilaterally symmetric Fourier approximations of the skull outlines of ...

    Indian Academy of Sciences (India)

    Unknown

    These points denotes break in curvature of the outline and their positions can be compared to .... temnospondyl skull outlines by their shape variations. 2. .... their dentition are related to the feeding habits. Future ... pondyl families is not easy.

  13. An annotated outline for a traffic management center operations manual

    Science.gov (United States)

    2000-10-01

    This draft Traffic Management Center (TMC) and Operations manual outline is meant to serve as a model "checklist" for the development of similar manuals used in deployed environments. The purpose of this outline is to provide a reference for agencies...

  14. Pd@Au core-shell nanocrystals with concave cubic shapes: kinetically controlled synthesis and electrocatalytic properties.

    Science.gov (United States)

    Zhang, Ling; Niu, Wenxin; Zhao, Jianming; Zhu, Shuyun; Yuan, Yali; Hua, Lianzhe; Xu, Guobao

    2013-01-01

    A new type of concave cubic Pd@Au core-shell nanocrystals is synthesized through a kinetically controlled growth process. Pd nanocubes of 56 nm are used as the inner core, and CTAC and Br(-) are used as the capping agent and selective adsorbent, respectively. A suitable ratio of HAuCl4 and cubic Pd seeds and the presence of Br(-) anions are critical to the growth of the concave cubic Pd@Au core-shell nanocrystals. The fast deposition rate on the corners of the cubic Pd seeds promotes the overgrowth of the Au outer shell along the direction, leading to the formation of concave cubic nanostructures. The reduction process is monitored by the surface plasmon resonance spectra of the nanocrystals, and the extinction band became broader and red shifted as the nanocrystals became larger. The electrocatalytic properties of the concave cubic Pd@Au core-shell nanocrystals were investigated with the cathodic electrochemiluminescence reaction of luminol and H2O2. A possible electrocatalytic mechanism was proposed and analyzed.

  15. Endophthalmitis after descemet stripping endothelial keratoplasty with concave-oriented dislocation on slit-lamp optical coherence topography.

    Science.gov (United States)

    Kaiura, Terry L; Ritterband, David C; Koplin, Richard S; Shih, Carolyn; Palmierto, Pat M; Seedor, John A

    2010-02-01

    To present the first reported case of Descemet membrane stripping endothelial keratoplasty (DSEK)-associated endophthalmitis with concave dislocation on slit-lamp optical coherence topography (SL-OCT). An 86-year-old man underwent DSEK for corneal decompensation secondary to prior surgery. On all postoperative visits, a slit-lamp examination and SL-OCT were performed. On the first postoperative day, the lenticle was dislocated in a concave configuration as imaged with the SL-OCT. On the second postoperative day, the patient had eye pain, nausea, and increased intraocular pressure. On SL-OCT imaging, the concave configuration and fibrin stranding were imaged. With intraocular pressure lowering, the patient's pain subsided, and he was scheduled for a lenticle refloat the following day. The next day, endophthalmitis was diagnosed secondary to exuberant purulent inflammation. At surgery, the lenticle was removed, cultures were obtained, and pars plana vitrectomy and intravitreal injections were administered. Intraoperative cultures were positive for heavy growth of Streptococcus pneumoniae. Endophthalmitis is a potential complication for any intraocular procedure including DSEK. SL-OCT imaging postoperatively may reveal concave lenticle configuration and subtle anterior chamber fibrin stranding may be early sign of endophthalmitis.

  16. Effects of electronic outlining on students' argumentative writing performance

    NARCIS (Netherlands)

    de Smet, M.R.J.; Broekkamp, H.; Brand-Gruwel, S.; Kirschner, P.A.

    2011-01-01

    This study examined the effect of electronic outlining on the quality of students' writing products and how outlining affects perceived mental effort during the writing task. Additionally, it was studied how students appropriate and appreciate an outline tool and whether they need explicit

  17. 9 CFR 114.9 - Outline of Production guidelines.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Outline of Production guidelines. 114.9 Section 114.9 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT... REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.9 Outline of Production guidelines. Each Outline of Production shall...

  18. Evaluation of concave dose distributions created using an inverse planning system

    International Nuclear Information System (INIS)

    Hunt, Margie A.; Hsiung, C.-Y.; Spirou, Spirodon V.; Chui, C.-S.; Amols, Howard I.; Ling, Clifton C.

    2002-01-01

    Purpose: To evaluate and develop optimum inverse treatment planning strategies for the treatment of concave targets adjacent to normal tissue structures. Methods and Materials: Optimized dose distributions were designed using an idealized geometry consisting of a cylindrical phantom with a concave kidney-shaped target (PTV) and cylindrical normal tissues (NT) placed 5-13 mm from the target. Targets with radii of curvature from 1 to 2.75 cm were paired with normal tissues with radii between 0.5 and 2.25 cm. The target was constrained to a prescription dose of 100% and minimum and maximum doses of 95% and 105% with relative penalties of 25. Maximum dose constraint parameters for the NT varied from 10% to 70% with penalties from 10 to 1000. Plans were evaluated using the PTV uniformity index (PTV D max /PTV D 95 ) and maximum normal tissue doses (NT D max /PTV D 95 ). Results: In nearly all situations, the achievable PTV uniformity index and the maximum NT dose exceeded the corresponding constraints. This was particularly true for small PTV-NT separations (5-8 mm) or strict NT dose constraints (10%-30%), where the achievable doses differed from the requested by 30% or more. The same constraint parameters applied to different PTV-NT separations yielded different dose distributions. For most geometries, a range of constraints could be identified that would lead to acceptable plans. The optimization results were fairly independent of beam energy and radius of curvature, but improved as the number of beams increased, particularly for small PTV-NT separations or strict dose constraints. Conclusion: Optimized dose distributions are strongly affected by both the constraint parameters and target-normal tissue geometry. Standard site-specific constraint templates can serve as a starting point for optimization, but the final constraints must be determined iteratively for individual patients. A strategy whereby NT constraints and penalties are modified until the highest

  19. Designs of contraction nozzle and concave back-wall for IFMIF target

    Energy Technology Data Exchange (ETDEWEB)

    Ida, Mizuho E-mail: ida@ifmif.tokai.jaeri.go.jp; Nakamura, Hideo; Nakamura, Hiroo; Takeuchi, Hiroshi

    2004-02-01

    For the liquid lithium flow target of International Fusion Materials Irradiation Facility (IFMIF), the double reducer (two-step contraction) nozzle with a high-contraction ratio of 10 which generated high-speed uniform jet flows up to 20 m/s was proposed. Multi-dimensional hydraulic analyses were carried out to verify the performance of the proposed nozzle. The analytical results showed that the double reducer nozzle would well generate high-speed uniform flow, while one-step contraction nozzle generated non-uniform flow and resulted in flow thickening at the beam footprint. For the target design, the range of the concave back-wall radius with no lithium boiling due to the centrifugal force and proper component arrangement in the irradiation test cell was determined by the thermal-hydraulic analysis of a free-surface flow. It was verified that the back-wall radius from 0.25 to 10 m was acceptable in the velocity range of 10-20 m/s.

  20. Reliable single chip genotyping with semi-parametric log-concave mixtures.

    Directory of Open Access Journals (Sweden)

    Ralph C A Rippe

    Full Text Available The common approach to SNP genotyping is to use (model-based clustering per individual SNP, on a set of arrays. Genotyping all SNPs on a single array is much more attractive, in terms of flexibility, stability and applicability, when developing new chips. A new semi-parametric method, named SCALA, is proposed. It is based on a mixture model using semi-parametric log-concave densities. Instead of using the raw data, the mixture is fitted on a two-dimensional histogram, thereby making computation time almost independent of the number of SNPs. Furthermore, the algorithm is effective in low-MAF situations.Comparisons between SCALA and CRLMM on HapMap genotypes show very reliable calling of single arrays. Some heterozygous genotypes from HapMap are called homozygous by SCALA and to lesser extent by CRLMM too. Furthermore, HapMap's NoCalls (NN could be genotyped by SCALA, mostly with high probability. The software is available as R scripts from the website www.math.leidenuniv.nl/~rrippe.

  1. Designs of contraction nozzle and concave back-wall for IFMIF target

    International Nuclear Information System (INIS)

    Ida, Mizuho; Nakamura, Hideo; Nakamura, Hiroo; Takeuchi, Hiroshi

    2004-01-01

    For the liquid lithium flow target of International Fusion Materials Irradiation Facility (IFMIF), the double reducer (two-step contraction) nozzle with a high-contraction ratio of 10 which generated high-speed uniform jet flows up to 20 m/s was proposed. Multi-dimensional hydraulic analyses were carried out to verify the performance of the proposed nozzle. The analytical results showed that the double reducer nozzle would well generate high-speed uniform flow, while one-step contraction nozzle generated non-uniform flow and resulted in flow thickening at the beam footprint. For the target design, the range of the concave back-wall radius with no lithium boiling due to the centrifugal force and proper component arrangement in the irradiation test cell was determined by the thermal-hydraulic analysis of a free-surface flow. It was verified that the back-wall radius from 0.25 to 10 m was acceptable in the velocity range of 10-20 m/s

  2. Water experiment of high-speed, free-surface, plane jet along concave wall

    International Nuclear Information System (INIS)

    Nakamura, Hideo; Ida, Mizuho; Kato, Yoshio; Maekawa, Hiroshi; Itoh, Kazuhiro; Kukita, Yutaka

    1997-01-01

    In the International Fusion Materials Irradiation Facility (IFMIF), an intense 14 MeV neutron beam will be generated in the high-speed liquid lithium (Li) plane jet target flowing along concave wall in vacuum. As part of the conceptual design activity (CDA) of the IFMIF, the stability of the plane liquid jet flow was studied experimentally with water in a well-defined channel geometry for non-heating condition. A two-dimensional double-reducer nozzle being newly proposed for the IFMIF target successfully provided a high-speed (≤ 17 m/s) stable water jet with uniform velocity distribution at the nozzle exit without flow separation in the nozzle. The free surface of the jet was covered by two-dimensional and/or three-dimensional waves, the size of which did not change much over the tested jet length of ∼130 mm. The jet velocity profile changed around the nozzle exit from uniform to that of free-vortex flow where the product of the radius of stream line and local velocity is constant in the jet thickness. The jet thickness increased immediately after exiting the nozzle because of the velocity profile change. The predicted jet thickness by a modified one-dimensional momentum model agreed with the data well. (author)

  3. On conservation of renewable resources with stock-dependent return and non-concave production

    International Nuclear Information System (INIS)

    Olson, Lars J.; Roy, Santanu

    1994-05-01

    An analysis is presented of the intertemporal choice foundations underlying the conservation or extinction of renewable resources when the resource production function is non-concave and the immediate return function depends on both current consumption and the size of the resource stock. This case may exhibit nonlinear dynamics and extinction is possible from high stocks even if conservation occurs from lower stocks. The paper focusses on the influence of preferences and the production function on the efficiency of: global conservation, the existence of a safe standard of conservation, or extinction. We show that conservation is efficient under weaker conditions than the 'δ-productivity' requirements derived in models where return function is not stock-dependent. The marginal rate of substitution between investment and the stock plays an important role in addition to the discount factor and the marginal productivity of the resource. Extinction need not be optimal even if the intrinsic growth rate of the resource is less than the external rate of return. Our analysis demonstrates the potential role of taxes, subsidies, demand forces, and harvest costs in determining the efficiency of conservation or extinction. 3 figs., 1 appendix, 24 refs

  4. On conservation of renewable resources with stock-dependent return and non-concave production

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Lars J. [Department of Agricultural and Resource Economics, University of Maryland, College Park, MD (United States); Roy, Santanu [Econometric Institute, Erasmus University, Rotterdam (Netherlands)

    1994-05-01

    An analysis is presented of the intertemporal choice foundations underlying the conservation or extinction of renewable resources when the resource production function is non-concave and the immediate return function depends on both current consumption and the size of the resource stock. This case may exhibit nonlinear dynamics and extinction is possible from high stocks even if conservation occurs from lower stocks. The paper focusses on the influence of preferences and the production function on the efficiency of: global conservation, the existence of a safe standard of conservation, or extinction. We show that conservation is efficient under weaker conditions than the `{delta}-productivity` requirements derived in models where return function is not stock-dependent. The marginal rate of substitution between investment and the stock plays an important role in addition to the discount factor and the marginal productivity of the resource. Extinction need not be optimal even if the intrinsic growth rate of the resource is less than the external rate of return. Our analysis demonstrates the potential role of taxes, subsidies, demand forces, and harvest costs in determining the efficiency of conservation or extinction. 3 figs., 1 appendix, 24 refs.

  5. A theoretical model for flow boiling CHF from short concave heaters

    International Nuclear Information System (INIS)

    Galloway, J.E.; Mudawar, I.

    1995-01-01

    Experiments were performed to enable the development of a new theoretical mode for the enhancement in CHF commonly observed with flow boiling on concave heater as compared to straight heaters. High-speed video imaging and photomicrography were employed to capture the trigger mechanism for CHF each type heater. A wavy vapor layer was observed to engulf the heater surface in each case, permitting liquid access to the surface only in regions where depressions (troughs) in the liquid vapor interface made contact with the surface. CHF in each case occurred when the pressure force exerted upon the wavy vapor-liquid inter ace in the contact region could no longer overcome the momentum of the vapor produced in these regional. Shorter interfacial wavelengths with greater curvature were measured on the curve, heater than on the straight heater, promoting a greater pressure force on the wave interface and a corresponding increase in CHF for the curved heater. A theoretics. CHF model is developed from these observations, based upon a new theory for hydrodynamic instability, along a curved interface. CHF data are predicted with good accuracy for both heaters. 23 refs., 9 figs

  6. Micro-concave waveguide antenna for high photon extraction from nitrogen vacancy centers in nanodiamond

    Science.gov (United States)

    Rajasekharan, Ranjith; Kewes, Günter; Djalalian-Assl, Amir; Ganesan, Kumaravelu; Tomljenovic-Hanic, Snjezana; McCallum, Jeffrey C.; Roberts, Ann; Benson, Oliver; Prawer, Steven

    2015-01-01

    The negatively charged nitrogen-vacancy colour center (NV− center) in nanodiamond is an excellent single photon source due to its stable photon generation in ambient conditions, optically addressable nuclear spin state, high quantum yield and its availability in nanometer sized crystals. In order to make practical devices using nanodiamond, highly efficient and directional emission of single photons in well-defined modes, either collimated into free space or waveguides are essential. This is a Herculean task as the photoluminescence of the NV centers is associated with two orthogonal dipoles arranged in a plane perpendicular to the NV defect symmetry axis. Here, we report on a micro-concave waveguide antenna design, which can effectively direct single photons from any emitter into either free space or into waveguides in a narrow cone angle with more than 80% collection efficiency irrespective of the dipole orientation. The device also enhances the spontaneous emission rate which further increases the number of photons available for collection. The waveguide antenna has potential applications in quantum cryptography, quantum computation, spectroscopy and metrology. PMID:26169682

  7. Automatic choroid cells segmentation and counting based on approximate convexity and concavity of chain code in fluorescence microscopic image

    Science.gov (United States)

    Lu, Weihua; Chen, Xinjian; Zhu, Weifang; Yang, Lei; Cao, Zhaoyuan; Chen, Haoyu

    2015-03-01

    In this paper, we proposed a method based on the Freeman chain code to segment and count rhesus choroid-retinal vascular endothelial cells (RF/6A) automatically for fluorescence microscopy images. The proposed method consists of four main steps. First, a threshold filter and morphological transform were applied to reduce the noise. Second, the boundary information was used to generate the Freeman chain codes. Third, the concave points were found based on the relationship between the difference of the chain code and the curvature. Finally, cells segmentation and counting were completed based on the characteristics of the number of the concave points, the area and shape of the cells. The proposed method was tested on 100 fluorescence microscopic cell images, and the average true positive rate (TPR) is 98.13% and the average false positive rate (FPR) is 4.47%, respectively. The preliminary results showed the feasibility and efficiency of the proposed method.

  8. Modeling of Focused Acoustic Field of a Concave Multi-annular Phased Array Using Spheroidal Beam Equation

    International Nuclear Information System (INIS)

    Yu Lili; Shou Wende; Hui Chun

    2012-01-01

    A theoretical model of focused acoustic field for a multi-annular phased array on concave spherical surface is proposed. In this model, the source boundary conditions of the spheroidal beam equation (SBE) for multi-annular phased elements are studied. Acoustic field calculated by the dynamic focusing model of SBE is compared with numerical results of the O'Neil and Khokhlov-Zabolotskaya-Kuznetsov (KZK) model, respectively. Axial dynamic focusing and the harmonic effects are presented. The results demonstrate that the dynamic focusing model of SBE is good valid for a concave multi-annular phased array with a large aperture angle in the linear or nonlinear field. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  9. Revisiting maximum-a-posteriori estimation in log-concave models: from differential geometry to decision theory

    OpenAIRE

    Pereyra, Marcelo

    2016-01-01

    Maximum-a-posteriori (MAP) estimation is the main Bayesian estimation methodology in many areas of data science such as mathematical imaging and machine learning, where high dimensionality is addressed by using models that are log-concave and whose posterior mode can be computed efficiently by using convex optimisation algorithms. However, despite its success and rapid adoption, MAP estimation is not theoretically well understood yet, and the prevalent view is that it is generally not proper ...

  10. Studies on the zeros of Bessel functions and methods for their computation: 2. Monotonicity, convexity, concavity, and other properties

    Science.gov (United States)

    Kerimov, M. K.

    2016-07-01

    This work continues the study of real zeros of first- and second-kind Bessel functions and Bessel general functions with real variables and orders begun in the first part of this paper (see M.K. Kerimov, Comput. Math. Math. Phys. 54 (9), 1337-1388 (2014)). Some new results concerning such zeros are described and analyzed. Special attention is given to the monotonicity, convexity, and concavity of zeros with respect to their ranks and other parameters.

  11. TAF(II)170 interacts with the concave surface of TATA-binding protein to inhibit its DNA binding activity.

    Science.gov (United States)

    Pereira, L A; van der Knaap, J A; van den Boom, V; van den Heuvel, F A; Timmers, H T

    2001-11-01

    The human RNA polymerase II transcription factor B-TFIID consists of TATA-binding protein (TBP) and the TBP-associated factor (TAF) TAF(II)170 and can rapidly redistribute over promoter DNA. Here we report the identification of human TBP-binding regions in human TAF(II)170. We have defined the TBP interaction domain of TAF(II)170 within three amino-terminal regions: residues 2 to 137, 290 to 381, and 380 to 460. Each region contains a pair of Huntington-elongation-A subunit-Tor repeats and exhibits species-specific interactions with TBP family members. Remarkably, the altered-specificity TBP mutant (TBP(AS)) containing a triple mutation in the concave surface is defective for binding the TAF(II)170 amino-terminal region of residues 1 to 504. Furthermore, within this region the TAF(II)170 residues 290 to 381 can inhibit the interaction between Drosophila TAF(II)230 (residues 2 to 81) and TBP through competition for the concave surface of TBP. Biochemical analyses of TBP binding to the TATA box indicated that TAF(II)170 region 290-381 inhibits TBP-DNA complex formation. Importantly, the TBP(AS) mutant is less sensitive to TAF(II)170 inhibition. Collectively, our results support a mechanism in which TAF(II)170 induces high-mobility DNA binding by TBP through reversible interactions with its concave DNA binding surface.

  12. Etude aerodynamique d'un jet turbulent impactant une paroi concave

    Science.gov (United States)

    LeBlanc, Benoit

    Etant donne la demande croissante de temperatures elevees dans des chambres de combustion de systemes de propulsions en aerospatiale (turbomoteurs, moteur a reaction, etc.), l'interet dans le refroidissement par jets impactant s'est vu croitre. Le refroidissement des aubes de turbine permet une augmentation de temperature de combustion, ce qui se traduit en une augmentation de l'efficacite de combustion et donc une meilleure economie de carburant. Le transfert de chaleur dans les au bages est influence par les aspects aerodynamiques du refroidissement a jet, particulierement dans le cas d'ecoulements turbulents. Un manque de comprehension de l'aerodynamique a l'interieur de ces espaces confinees peut mener a des changements de transfert thermique qui sont inattendus, ce qui augmente le risque de fluage. Il est donc d'interet pour l'industrie aerospatiale et l'academie de poursuivre la recherche dans l'aerodynamique des jets turbulents impactant les parois courbes. Les jets impactant les surfaces courbes ont deja fait l'objet de nombreuses etudes. Par contre des conditions oscillatoires observees en laboratoire se sont averees difficiles a reproduire en numerique, puisque les structures d'ecoulements impactants des parois concaves sont fortement dependantes de la turbulence et des effets instationnaires. Une etude experimentale fut realisee a l'institut PPRIME a l'Universite de Poitiers afin d'observer le phenomene d'oscillation dans le jet. Une serie d'essais ont verifie les conditions d'ecoulement laminaires et turbulentes, toutefois le cout des essais experimentaux a seulement permis d'avoir un apercu du phenomene global. Une deuxieme serie d'essais fut realisee numeriquement a l'Universite de Moncton avec l'outil OpenFOAM pour des conditions d'ecoulement laminaire et bidimensionnel. Cette etude a donc comme but de poursuivre l'enquete de l'aerodynamique oscillatoire des jets impactant des parois courbes, mais pour un regime d'ecoulement transitoire, turbulent

  13. The Interior City. Infinity and Concavity in the No-Stop City(1970-1971

    Directory of Open Access Journals (Sweden)

    Pablo Martínez Capdevila

    2013-10-01

    Full Text Available AbstractIn the late 60s it had become clear how the environment technification had allowed some typologies (supermarkets, car parks, factories to reach potentially unlimited built depths becoming, therefore, independent from the outside. The No-Stop City is born from a very simple idea: to extend this technification to the totality of built reality encompassing, not only almost all functions, but ultimately, the whole city. This operation has paradoxical effects: as architecture grows, it loses most of the features that have traditionally defined it. A dissolution by hypertrophy that gives rise to an homogeneous, concave and potentially infinite space.But beyond the pure technical feasibility, there are two key influences, seemingly contradictory, that explain this endeavor for an interior and endless city: Marxism and Pop Art. The project is, in many senses, a built manifesto reflecting the militancy of the group members within the Italian Marxism. But it is also the embodiment of the group's declared interest in Pop Art, popular culture and mass society. The cross-influence of communism and consumerism explains this "quantitative utopia" in which the society and the factory, the production and consumption, would match. A city based on the centrality of consumer products and the subsequent loss of prominence of architecture, in which the urban phenomenon, while spreading endlessly over territory, ignoring its rural exteriority, dissolves the home as a sphere of privacy, ignoring its domestic interiority.A project, also in the wake of Marshall McLuhan, that illustrates like few others the conversion of the urbane into a virtually omnipresent "condition" and that still interrogates us with questions that are, on the other hand, eternal: What is a building? What is a city?Key wordsBranzi, dissolution, pop, Marxism, neo-avant-garde

  14. Bilaterally symmetric Fourier approximations of the skull outlines of ...

    Indian Academy of Sciences (India)

    Present work illustrates a scheme of quantitative description of the shape of the skull outlines of temnospondyl amphibians using bilaterally symmetric closed Fourier curves. Some special points have been identified on the Fourier fits of the skull outlines, which are the local maxima, or minima of the distances from the ...

  15. Technical basis for the ITER-FEAT outline design. Progress in resolving open design issues from the outline design report

    International Nuclear Information System (INIS)

    2000-01-01

    In this publication the technical basis for the ITER-FEAT outline design is presented. It comprises the Plant Design Specifications, the Safety Principles and Environmental Criteria, the Site Requirements and Site Design Assumptions. The outline of the key features of the ITER-FEAT design includes main physical parameters and assessment, design overview and preliminary safety assessment, cost and schedule

  16. A Suggested Curriculum Outline for German in Secondary Schools

    Science.gov (United States)

    Clutterbuck, J. M.

    1975-01-01

    Outlines a four-year program of German study aiming to give students a basic ability in spoken and written German, knowledge of German culture, and preparation for advanced German study. Study topics and textbooks are included. (CHK)

  17. The Björk-Shiley 70 degree convexo-concave prosthesis strut fracture problem (present state of information).

    Science.gov (United States)

    Ostermeyer, J; Horstkotte, D; Bennett, J; Huysmans, H; Lindblom, D; Olin, C; Orinius, E; Semb, G

    1987-04-01

    Between June 1980 and June 1983 4028 Björk-Shiley 70 degree convexo-concave prosthetic heart valves were distributed and implanted in Australia, Canada, Europe and South Africa. As of March 1986, a total of 52 outlet strut fractures (1.29%; 70% CL: 1.1%-1.5%) have been reported from 29 implant institutions in 12 countries. The majority (82.7%) occurred in Europe. Intervals between implantation and fracture were 13 days to 45.3 months (mean: 18.4 months; 70% CL: 16.6 months-20.1 months). The mortality rate after strut fracture was 78.7% (70% CL: 72.5%-84.9%). Upon stratification of the fracture by valve sizes and types it becomes evident that 75% (70% CL: 68.8%-81.2%) of all fractures are related to the sizes 29 mm to 33 mm (which virtually represent the same valve size) and predominantly to mitral valves (p less than 0.01). The large valves again have been stratified into two subsets, namely those fabricated from flanges originally machined as Björk-Shiley 60 degree convexo-concave valves (group I) and later produced valves machined initially to 70 degree specifications (group II). In group I the fracture rate was 5.2% (70% CL: 4.2%-6.2%) versus 1.6% (70% CL: 1.1%-2.1%) in group II (p less than 0.01), which identifies the group I 29 mm-33 mm Björk-Shiley 70 degree convexo-concave valves as the highest risk group for strut fracture. The rates are based upon all available information as of March 16, 1986.(ABSTRACT TRUNCATED AT 250 WORDS)

  18. Three-dimensional imaging of a complex concaved cuboctahedron copper sulfide crystal by x-ray nanotomography

    International Nuclear Information System (INIS)

    Chen Jie; Tian Jinping; Li Wenjie; Tian Yangchao; Wu Chunyan; Yu Shuhong

    2008-01-01

    By combining Fresnel zone-plate based transmission x-ray microscopy with computed tomography, the nanoscale features in materials with complex shapes can be imaged using synchrotron radiation. The tomographic data sets of a complex copper sulfide crystal were acquired in the angle range ±70 deg. at photon energy of 8.0 keV and then were reconstructed by a standard filtered-back-projection algorithm. This experiment shows the quantifiable three-dimensional information of the copper sulfide crystal, which offers a complete understanding of the concaved cuboctahedron structure with 14 faces comprising of six squares and eight triangles

  19. Fabricating small-scale, curved, polymeric structures with convex and concave menisci through interfacial free energy equilibrium.

    Science.gov (United States)

    Cheng, Chao-Min; Matsuura, Koji; Wang, I-Jan; Kuroda, Yuka; LeDuc, Philip R; Naruse, Keiji

    2009-11-21

    Polymeric curved structures are widely used in imaging systems including optical fibers and microfluidic channels. Here, we demonstrate that small-scale, poly(dimethylsiloxane) (PDMS)-based, curved structures can be fabricated through controlling interfacial free energy equilibrium. Resultant structures have a smooth, symmetric, curved surface, and may be convex or concave in form based on surface tension balance. Their curvatures are controlled by surface characteristics (i.e., hydrophobicity and hydrophilicity) of the molds and semi-liquid PDMS. In addition, these structures are shown to be biocompatible for cell culture. Our system provides a simple, efficient and economical method for generating integrateable optical components without costly fabrication facilities.

  20. Plasmonic enhancement of UV emission from ZnO thin films induced by Al nano-concave arrays

    International Nuclear Information System (INIS)

    Norek, Małgorzata; Łuka, Grzegorz; Włodarski, Maksymilian

    2016-01-01

    Highlights: • Al nano-concave arrays with different interpore distance (D c ) were prepared. • PL of ZnO thin films deposited directly on the Al nano-concaves were studied. • The effect of 10 nm Al 2 O 3 spacer on PL emission from ZnO thin films was analyzed. • Plasmonic enhancement of the PL emission was dependent on the D c and the spacer. • The highest 9-fold enhancement was obtained for the Al/ZnO sample with D c ∼333 nm. - Abstract: Surface plasmons (SPs) supported by Al nano-concave arrays with increasing interpore distance (D c ) were used to enhance the ultraviolet light emission from ZnO thin films. Two sets of samples were prepared: in the first set the thin ZnO films were deposited directly on Al nanoconcaves (the Al/ZnO samples) and in the second set a 10 nm − Al 2 O 3 spacer was placed between the textured Al and the ZnO films (the Al/Al 2 O 3 -ALD/ZnO samples). In the Al/ZnO samples the enhancement was limited by a nonradiative energy dissipation due to the Ohmic loss in the Al metal. However, for the ZnO layer deposited directly on Al nanopits synthesized at 150 V (D c = 333 ± 18 nm), the largest 9-fold enhancement was obtained by achieving the best energy fit between the near band-edge (NBE) emission from ZnO and the λ (0,1) SPP resonance mode. In the Al/Al 2 O 3 -ALD/ZnO samples the amplification of the UV emission was smaller than in the Al/ZnO samples due to a big energy mismatch between the NBE emission and the λ (0,1) plasmonic mode. The results obtained in this work indicate that better tuning of the NBE − λ (0,1) SPP resonance mode coupling is possible through a proper modification of geometrical parameters in the Al/Al 2 O 3 -ALD/ZnO system such as Al nano-concave spacing and the thickness of the corresponding layer. This approach will reduce the negative influence of the non-radiative plasmonic modes and most likely will lead to further enhancement of the SP-modulated UV emission from ZnO thin films.

  1. Plasmonic enhancement of UV emission from ZnO thin films induced by Al nano-concave arrays

    Energy Technology Data Exchange (ETDEWEB)

    Norek, Małgorzata, E-mail: mnorek@wat.edu.pl [Department of Advanced Materials and Technologies, Faculty of Advanced Technologies and Chemistry, Military University of Technology, Kaliskiego 2, 00-908 Warsaw (Poland); Łuka, Grzegorz [Institute of Physics, Polish Academy of Sciences, al. Lotników 32/46, 02-668 Warsaw (Poland); Włodarski, Maksymilian [Institute of Optoelectronics, Military University of Technology, Str. Kaliskiego 2, 00-908 Warszawa (Poland)

    2016-10-30

    Highlights: • Al nano-concave arrays with different interpore distance (D{sub c}) were prepared. • PL of ZnO thin films deposited directly on the Al nano-concaves were studied. • The effect of 10 nm Al{sub 2}O{sub 3} spacer on PL emission from ZnO thin films was analyzed. • Plasmonic enhancement of the PL emission was dependent on the D{sub c} and the spacer. • The highest 9-fold enhancement was obtained for the Al/ZnO sample with D{sub c} ∼333 nm. - Abstract: Surface plasmons (SPs) supported by Al nano-concave arrays with increasing interpore distance (D{sub c}) were used to enhance the ultraviolet light emission from ZnO thin films. Two sets of samples were prepared: in the first set the thin ZnO films were deposited directly on Al nanoconcaves (the Al/ZnO samples) and in the second set a 10 nm − Al{sub 2}O{sub 3} spacer was placed between the textured Al and the ZnO films (the Al/Al{sub 2}O{sub 3}-ALD/ZnO samples). In the Al/ZnO samples the enhancement was limited by a nonradiative energy dissipation due to the Ohmic loss in the Al metal. However, for the ZnO layer deposited directly on Al nanopits synthesized at 150 V (D{sub c} = 333 ± 18 nm), the largest 9-fold enhancement was obtained by achieving the best energy fit between the near band-edge (NBE) emission from ZnO and the λ{sub (0,1)} SPP resonance mode. In the Al/Al{sub 2}O{sub 3}-ALD/ZnO samples the amplification of the UV emission was smaller than in the Al/ZnO samples due to a big energy mismatch between the NBE emission and the λ{sub (0,1)} plasmonic mode. The results obtained in this work indicate that better tuning of the NBE − λ{sub (0,1)} SPP resonance mode coupling is possible through a proper modification of geometrical parameters in the Al/Al{sub 2}O{sub 3}-ALD/ZnO system such as Al nano-concave spacing and the thickness of the corresponding layer. This approach will reduce the negative influence of the non-radiative plasmonic modes and most likely will lead to further

  2. Efficacy of sacubitril/valsartan vs. enalapril at lower than target doses in heart failure with reduced ejection fraction: the PARADIGM-HF trial.

    Science.gov (United States)

    Vardeny, Orly; Claggett, Brian; Packer, Milton; Zile, Michael R; Rouleau, Jean; Swedberg, Karl; Teerlink, John R; Desai, Akshay S; Lefkowitz, Martin; Shi, Victor; McMurray, John J V; Solomon, Scott D

    2016-10-01

    In this analysis, we utilized data from PARADIGM-HF to test the hypothesis that participants who exhibited any dose reduction during the trial would have similar benefits from lower doses of sacubitril/valsartan relative to lower doses of enalapril. In a post-hoc analysis from PARADIGM-HF, we characterized patients by whether they received the maximal dose (200 mg sacubitril/valsartan or 10 mg enalapril twice daily) throughout the trial or had any dose reduction to lower doses (100/50/0 mg sacubitril/valsartan or 5/2.5/0 mg enalapril twice daily). The treatment effect for the primary outcome was estimated, stratified by dose level using time-updated Cox regression models. In the two treatment arms, participants with a dose reduction (43% of those randomized to enalapril and 42% of those randomized to sacubitril/valsartan) had similar baseline characteristics and similar baseline predictors of the need for dose reduction. In a time-updated analysis, any dose reduction was associated with a higher subsequent risk of the primary event [hazard ratio (HR) 2.5, 95% confidence interval (CI) 2.2-2.7]. However, the treatment benefit of sacubitril/valsartan over enalapril following a dose reduction was similar (HR 0.80, 95% CI 0.70-0.93, P sacubitril/valsartan relative to those on lower doses of enalapril was similar to that of patients who remained on target doses of both drugs. © 2016 The Authors. European Journal of Heart Failure published by John Wiley & Sons Ltd on behalf of European Society of Cardiology.

  3. Fabrication of complex free-standing nanostructures with concave and convex curvature via the layer-by-layer approach.

    Science.gov (United States)

    Raoufi, Mohammad; Schönherr, Holger

    2014-02-18

    We report on the fabrication of unprecedented free-standing complex polymeric nanoobjects, which possess both concave and convex curvatures, by exploiting the layer-by-layer (LBL) deposition of polyelectrolytes. In a combined top-down/bottom-up replication approach pore diameter-modulated anodic aluminum oxide (AAO) templates, fabricated by temperature modulation hard anodization (TMHA), were replicated with multilayers of poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) to yield open nanotubes with diameters in the wide and narrow segments of 210 and 150 nm, respectively. To obtain stable pore diameter-modulated nanopores, which possess segment lengths between 1 and 5 μm and 5 and 10 μm in the narrow and wide pore portion, respectively, conventional hard anodization of aluminum was followed by a subsequent temperature-modulated anodization. After removing the backside aluminum electrode, silanizing the aluminum oxide, and passivating the exposed membrane surface with a thin layer of gold, PSS and PAH were deposited alternatingly to yield LBL multilayers. For optimized LBL multilayer thicknesses and compactness, established in separate experiments on silicon substrates and nanoporous AAO with straight pores, free-standing polymeric nanoobjects with concave and convex curvatures, were obtained. These were stable for wall thickness to pore diameter ratios of ≥0.08.

  4. Fabrication of agarose concave petridish for 3D-culture microarray method for spheroids formation of hepatic cells.

    Science.gov (United States)

    Zhang, Binbin; Li, Yang; Wang, Gaoshang; Jia, Zhidong; Li, Haiyan; Peng, Qing; Gao, Yi

    2018-04-19

    Liver is one of the most important organ in the body. But there are many limitations about liver transplantation for liver failure. It is quite important to develop the xenogeneic biological liver for providing an alternation to transplantation or liver regeneration. In this paper, we proposed a method to construct a novel kind of agarose 3D-culture concave microwell array for spheroids formation of hepatic cells. Using the 3D printing method, the microwell array was fabricated with an overall size of 6.4 mm × 6.4 mm, containing 121 microwells with 400 μm width/400 μm thickness. By exploiting the Polydimethylsiloxane (PDMS) membranes as a bridge, we finally fabricated the agarose one. We co-cultured three types of liver cells with bionics design in the microwell arrays. Using the methods described above, the resulting co-formed hepatocyte spheroids maintained the high viability and stable liver-specific functions. This engineered agarose concave microwell array could be a potentially useful tool for forming the elements for biological liver support. After developing the complete system, we also would consider to scale up the application of this system. It will be not only applied to the therapy of human organ damage, but also to the development of disease models and drug screening models.

  5. Schaum’s outline of fluid mechanics and hydraulics

    CERN Document Server

    Giles, Ranald V; Liu, Cheng

    2014-01-01

    Tough Test Questions? Missed Lectures? Not Enough Time? Fortunately, there's Schaum's. More than 40 million students have trusted Schaum's to help them succeed in the classroom and on exams. Schaum's is the key to faster learning and higher grades in every subject. Each Outline presents all the essential course information in an easy-to-follow, topic-by-topic format. You also get hundreds of examples, solved problems, and practice exercises to test your skills. This Schaum's Outline gives you: 622 fully solved problems; extra practice on topics such as buoyancy and flotation, complex pipeline systems, fluid machinery, flow in open channels, and more; and support for all the major textbooks for fluidmechanics and hydraulics courses. Fully compatible with your classroom text, Schaum's highlights all the important facts you need to know. Use Schaum's to shorten your study time - and get your best test scores! Schaum's Outlines - Problem Solved.

  6. Iris concavity, corneal biomechanics, and their correlations with ocular biometry in a cohort of 10- to 12-year-old UK school boys: baseline data.

    Science.gov (United States)

    Shah, Ameet; Low, Sancy; Garway-Heath, David F; Foster, Paul J; Barton, Keith

    2014-04-17

    Pigment dispersion syndrome is associated with iris concavity. This study investigated the prevalence of iris concavity, defined as a measurement of ≤-0.1 mm, in a cohort of 10- to 12-year-old boys, and explored the relationship between iris curvature and anterior segment biometry. Associations with corneal biomechanical parameters also were explored. A cohort of school boys (n = 96) was recruited from a local school. Anterior segment optical coherence tomography (AS-OCT) was performed under accommodative and nonaccommodative conditions, and iris curvature quantified. Corneal hysteresis (CH) and corneal resistance factor (CRF) were measured with the ocular response analyzer (ORA). Noncontact axial biometry was performed using laser interferometry. The prevalence of iris concavity was 24% on distance fixation, increasing to 65% on accommodation. Variables significantly associated with nonaccommodating iris curvature were lens vault (P = 0.02) and mean keratometry (P = 0.02). For both variables acting jointly, R(2) = 0.30. Variables associated significantly with accommodating iris curvature were anterior chamber depth (P = 0.009), lens vault (P = 0.049), and mean scleral spur angle (P Iris concavity was a common finding in this cohort and related to anterior segment biometric parameters. Further work is required to clarify whether anatomical differences exist between iris concavity seen in the adolescent eye and that found in adults with pigment dispersion syndrome. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

  7. Opaque Watercolor (Tentative Course Outline). Art Education: 6673.05.

    Science.gov (United States)

    Greenaway, Jean E.

    This tentative course outline is for use in one of the Quinmester Program classes, Opaque Watercolor. Designed for students in grades 7-12, with no prerequisite, the course includes the introduction of a variety of techniques in a number of opaque media including tempera, gouache, and cassein. Matting and mounting techniques are also taught. A…

  8. Small Business Management. Part II. A Suggested Adult Course Outline.

    Science.gov (United States)

    New York State Education Dept., Albany. Bureau of Continuing Education Curriculum Development.

    This teacher's guide is a companion to "Small Business Management Part I" published by the New York State Education Department in 1968. The course outlined by the guide is primarily for those who aspire to own and operate their own business, and those in business who wish to improve their operations. The course consists of six lessons covering…

  9. Outlines of a Multiple Trace Theory of Temporal Preparation.

    NARCIS (Netherlands)

    Los, S.A.; Kruijne, W.; Meeter, M.

    2014-01-01

    We outline a new multiple trace theory of temporal preparation (MTP), which accounts for behavior in reaction time (RT) tasks in which the participant is presented with a warning stimulus (S1) followed by a target stimulus (S2) that requires a speeded response. The theory assumes that during the

  10. SALES PROMOTION, A SUGGESTED ADULT DISTRIBUTIVE EDUCATION COURSE OUTLINE.

    Science.gov (United States)

    RUBIN, ALAN J.; AND OTHERS

    THIS SUGGESTED OUTLINE FOR A BASIC COURSE IN SALES PROMOTION IS DESIGNED FOR NOT LESS THAN FIVE 2-HOUR SESSIONS ON (1) ASPECTS OF SALES PROMOTION, (2) SALES PROMOTION TECHNIQUES, (3) NEWSPAPER ADVERTISING, (4) WINDOW AND INTERIOR DISPLAY PRINCIPLES, AND (5) SELECTED PROMOTIONAL MEDIA AND DEVICES. POSSIBLE TEACHERS INCLUDE A SALES PROMOTION…

  11. RETAIL ORGANIZATION, A SUGGESTED ADULT DISTRIBUTIVE EDUCATION COURSE OUTLINE.

    Science.gov (United States)

    MAURO, RALPH N.; AND OTHERS

    THIS SUGGESTED OUTLINE FOR A COURSE ON RETAIL ORGANIZATION IS PLANNED FOR FIVE 2-HOUR SESSIONS ON (1) EVOLUTION OF RETAIL ORGANIZATIONAL STRUCTURE, (2) ORGANIZATION, INCLUDING CONCEPTS, PRINCIPLES, AND PRACTICES, (3) TYPICAL RETAIL ORGANIZATION PATTERNS, (4) ORGANIZATIONAL AND FUNCTIONAL ANAYSIS, INCLUDING MERCHANDISING, SALES PROMOTION, AND…

  12. 26 CFR 1.679-0 - Outline of major topics.

    Science.gov (United States)

    2010-04-01

    ... transfers. (1) Principal purpose of tax avoidance. (2) Principal purpose of tax avoidance deemed to exist... Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Grantors and Others Treated As Substantial Owners § 1.679-0 Outline of major topics. This...

  13. Systema naturae or the outline of living world classification

    OpenAIRE

    Shipunov, Alexey

    2009-01-01

    Here we present the short outline of the classification of living things (to the level of classes), given with two main goals: to provide a compact, synthetic overview of the biological diversity; and to supply users with up-todate information of latest taxonomic achievements. The latter is especially important in the recent epoch of molecular revolution in the taxonomy.

  14. Relatorio: Exposicao de motivos (Report: Outline of Proposals).

    Science.gov (United States)

    Ministerio da Educacao e Cultura, Rio de Janeiro (Brazil).

    This document is an English-language abstract (approximately 1,500 words) of an outline of proposals to improve education in Brazil, both administratively and content-wise. Various administrative changes are recommended to overcome the lack of coordination existing at that point between the various services of the Ministry, precluding any coherent…

  15. ESSENTIALS OF MERCHANDISING, A SUGGESTED ADULT DISTRIBUTIVE EDUCATION COURSE OUTLINE.

    Science.gov (United States)

    MARKMAN, STANLEY

    THIS OUTLINE FOR A COURSE IN THE ESSENTIALS OF MERCHANDISING IS DESIGNED FOR THE INEXPERIENCED RETAIL EMPLOYEE. THE COURSE IS PLANNED FOR SIX 2-HOUR SESSIONS ON (1) FUNDAMENTALS OF MERCHANDISING, (2) TERMINOLOGY AND MATHEMATICS OF MERCHANDISING, (3) BUYING POLICIES AND PRACTICES, (4) MARKET REPRESENTATIVES, (5) TERMS OF PURCHASE, INCLUDING…

  16. A new type of In-core sensor validation outline

    International Nuclear Information System (INIS)

    Figedy, S.

    2006-01-01

    In this a new type of in-core sensor validation method is outlined, which is based on combination of correlation coefficients and mutual information indices. First experience with this approach is described and further improvements to enhance the outcome reliability are proposed namely through computational intelligence techniques (Authors)

  17. Technical basis for the ITER-FEAT outline design

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-11-01

    This ITER EDA Documentation Series issue summarizes the results of the ITER Engineering Design Activities on the technical basis for the ITER-FEAT outline design. This issue also comprises some physical analysis activities as well as structure and goals of the Physics Expert Group activities.

  18. Technical basis for the ITER-FEAT outline design

    International Nuclear Information System (INIS)

    2000-01-01

    This ITER EDA Documentation Series issue summarizes the results of the ITER Engineering Design Activities on the technical basis for the ITER-FEAT outline design. This issue also comprises some physical analysis activities as well as structure and goals of the Physics Expert Group activities

  19. Effects of electronic outlining on the organization of text ideas

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Broekkamp, Hein; Kirschner, Paul A.

    2011-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Broekkamp, H., & Kirschner, P. A. (2011, August). Effects of electronic outlining on the organization of text ideas. Presentation at the annual meeting of the Junior Researchers of the European Association for Research on Learning and Instruction, Exeter, UK.

  20. Validation techniques for object-oriented proof outlines

    NARCIS (Netherlands)

    Pierik, C.

    2006-01-01

    This thesis presents a proof outline logic for a simple object-oriented programming language. The language has all object-oriented features of popular programming languages like Java and C#. In particular, it supports inheritance, field shadowing, aliasing, dynamic object creation, subtype

  1. Effects of electronic outlining on students’ argumentative writing performance

    NARCIS (Netherlands)

    De Smet, Milou; Broekkamp, Hein; Brand-Gruwel, Saskia; Kirschner, Paul A.

    2011-01-01

    De Smet, M. J. R., Broekkamp, H., Brand-Gruwel, S., & Kirschner, P. A. (2011). Effects of electronic outlining on students’ argumentative writing performance. Journal of Computer Assisted Learning, 27(6), 557-574. doi: 0.1111/j.1365-2729.2011.00418.x

  2. Acute stroke: automatic perfusion lesion outlining using level sets.

    Science.gov (United States)

    Mouridsen, Kim; Nagenthiraja, Kartheeban; Jónsdóttir, Kristjana Ýr; Ribe, Lars R; Neumann, Anders B; Hjort, Niels; Østergaard, Leif

    2013-11-01

    To develop a user-independent algorithm for the delineation of hypoperfused tissue on perfusion-weighted images and evaluate its performance relative to a standard threshold method in simulated data, as well as in acute stroke patients. The study was approved by the local ethics committee, and patients gave written informed consent prior to their inclusion in the study. The algorithm identifies hypoperfused tissue in mean transit time maps by simultaneously minimizing the mean square error between individual and mean perfusion values inside and outside a smooth boundary. In 14 acute stroke patients, volumetric agreement between automated outlines and manual outlines determined in consensus among four neuroradiologists was assessed with Bland-Altman analysis, while spatial agreement was quantified by using lesion overlap relative to mean lesion volume (Dice coefficient). Performance improvement relative to a standard threshold approach was tested with the Wilcoxon signed rank test. The mean difference in lesion volume between automated outlines and manual outlines was -9.0 mL ± 44.5 (standard deviation). The lowest mean volume difference for the threshold approach was -25.8 mL ± 88.2. A significantly higher Dice coefficient was observed with the algorithm (0.71; interquartile range [IQR], 0.42-0.75) compared with the threshold approach (0.50; IQR, 0.27- 0.57; P , .001). The corresponding agreement among experts was 0.79 (IQR, 0.69-0.83). The perfusion lesions outlined by the automated algorithm agreed well with those defined manually in consensus by four experts and were superior to those obtained by using the standard threshold approach. This user-independent algorithm may improve the assessment of perfusion images as part of acute stroke treatment. http://radiology.rsna.org/lookup/suppl/doi:10.1148/radiol.13121622/-/DC1. RSNA, 2013

  3. AUTOMATIC BUILDING OUTLINING FROM MULTI-VIEW OBLIQUE IMAGES

    Directory of Open Access Journals (Sweden)

    J. Xiao

    2012-07-01

    Full Text Available Automatic building detection plays an important role in many applications. Multiple overlapped airborne images as well as lidar point clouds are among the most popular data sources used for this purpose. Multi-view overlapped oblique images bear both height and colour information, and additionally we explicitly have access to the vertical extent of objects, therefore we explore the usability of this data source solely to detect and outline buildings in this paper. The outline can then be used for further 3D modelling. In the previous work, building hypotheses are generated using a box model based on detected façades from four directions. In each viewing direction, façade edges extracted from images and height information by stereo matching from an image pair is used for the façade detection. Given that many façades were missing due to occlusion or lack of texture whilst building roofs can be viewed in most images, this work mainly focuses on improve the building box outline by adding roof information. Stereo matched point cloud generated from oblique images are combined with the features from images. Initial roof patches are located in the point cloud. Then AdaBoost is used to integrate geometric and radiometric attributes extracted from oblique image on grid pixel level with the aim to refine the roof area. Generalized contours of the roof pixels are taken as building outlines. The preliminary test has been done by training with five buildings and testing around sixty building clusters. The proposed method performs well concerning covering the irregular roofs as well as improve the sides location of slope roof buildings. Outline result comparing with cadastral map shows almost all above 70% completeness and correctness in an area-based assessment, as well as 20% to 40% improvement in correctness with respect to our previous work.

  4. Three-Dimensional Steady Supersonic Euler Flow Past a Concave Cornered Wedge with Lower Pressure at the Downstream

    Science.gov (United States)

    Qu, Aifang; Xiang, Wei

    2018-05-01

    In this paper, we study the stability of the three-dimensional jet created by a supersonic flow past a concave cornered wedge with the lower pressure at the downstream. The gas beyond the jet boundary is assumed to be static. It can be formulated as a nonlinear hyperbolic free boundary problem in a cornered domain with two characteristic free boundaries of different types: one is the rarefaction wave, while the other one is the contact discontinuity, which can be either a vortex sheet or an entropy wave. A more delicate argument is developed to establish the existence and stability of the square jet structure under the perturbation of the supersonic incoming flow and the pressure at the downstream. The methods and techniques developed here are also helpful for other problems involving similar difficulties.

  5. Five-year results after valve replacement with the Björk-Shiley 70 degrees convexo-concave prosthesis.

    Science.gov (United States)

    Koldsland, S; Svennevig, J L; Abdelnoor, M; Aas, H; Semb, G

    1992-01-01

    In the 18 months up to July 1983, 120 Björk-Shiley convexo-concave prostheses with 70 degrees opening angle were implanted in 47 women and 61 men aged 19-78 (mean 58.6) years. The prosthetic valves were aortic in 65 cases, mitral in 23 and both aortic and mitral in 20 cases. Emergency operation was required in ten cases, and concomitant surgery was performed in 43 (39.8%). The early mortality was 5.5%. A follow-up study, comprising 498 patient years, revealed 73.1% 5-year survival. There were three mechanical failures of prosthesis, in one of which re-replacement was successful. Elective prosthesis replacement was performed in four other cases judged to be at high risk of strut fracture.

  6. Self-Similar Solutions of Rényi’s Entropy and the Concavity of Its Entropy Power

    Directory of Open Access Journals (Sweden)

    Agapitos N. Hatzinikitas

    2015-08-01

    Full Text Available We study the class of self-similar probability density functions with finite mean and variance, which maximize Rényi’s entropy. The investigation is restricted in the Schwartz space S(Rd and in the space of l-differentiable compactly supported functions Clc (Rd. Interestingly, the solutions of this optimization problem do not coincide with the solutions of the usual porous medium equation with a Dirac point source, as occurs in the optimization of Shannon’s entropy. We also study the concavity of the entropy power in Rd with respect to time using two different methods. The first one takes advantage of the solutions determined earlier, while the second one is based on a setting that could be used for Riemannian manifolds.

  7. Characterizing the Hofstadter butterfly's outline with Chern numbers

    International Nuclear Information System (INIS)

    Goldman, N

    2009-01-01

    In this work, we report original properties inherent to independent particles subjected to a magnetic field by emphasizing the existence of regular structures in the energy spectrum's outline. We show that this fractal curve, the well-known Hofstadter butterfly's outline, is associated with a specific sequence of Chern numbers that correspond to the quantized transverse conductivity. Indeed the topological invariant that characterizes the fundamental energy band depicts successive stairways as the magnetic flux varies. Moreover each stairway is shown to be labelled by another Chern number which measures the charge transported under displacement of the periodic potential. We put forward the universal character of these properties by comparing the results obtained for the square and the honeycomb geometries.

  8. An Outline of the New Norwegian Criminal Code

    Directory of Open Access Journals (Sweden)

    Jørn Jacobsen

    2015-12-01

    Full Text Available This article gives an overview of the new criminal code, its background and content. It maps out the code’s background, the legislative process and central ideas. Furthermore, the article gives an outline of the general criteria for criminal responsibility according to the code, the offences and forms of punishment and other reactions. The article emphasises the most important changes from the previous code of 1902. To some degree, strengths and weaknesses of the new code are addressed.

  9. Facile synthesis and electrochemiluminescence application of concave trisoctahedral Pd@Au core-shell nanocrystals bound by {331} high-index facets.

    Science.gov (United States)

    Zhang, Ling; Niu, Wenxin; Li, Zhiyuan; Xu, Guobao

    2011-10-07

    Concave trisoctahedral (TOH) Pd@Au core-shell nanocrystals bound by {331} facets have been synthesized for the first time. Pd nanocubes and cetyltrimethylammonium chloride were used as the structure-directing cores and capping agents, respectively. Their optical and electrocatalytic properties were investigated. This journal is © The Royal Society of Chemistry 2011

  10. Synthesis of Au@Pt bimetallic nanoparticles with concave Au nanocuboids as seeds and their enhanced electrocatalytic properties in the ethanol oxidation reaction

    Science.gov (United States)

    Tan, Lingyu; Li, Lidong; Peng, Yi; Guo, Lin

    2015-12-01

    Herein, a new type of uniform and well-structured Au@Pt bimetallic nanoparticles (BNPs) with highly active concave Au nanocuboids (NCs) as seeds was successfully synthesized by using the classic seed-mediated method. Electrochemical measurements were conducted to demonstrate their greatly enhanced catalytic performance in the ethanol oxidation reaction (EOR). It was found that the electrochemical performance for Au@Pt BNPs with the concave Au NCs as seeds, which were enclosed by {611} high-index facets, could be seven times higher than that of the Au@Pt bimetallic nanoparticles with regular spherical Au NPs as seeds. Furthermore, our findings show that the morphology and electrocatalytic activity of the Au@Pt BNPs can be tuned simply by changing the compositional ratios of the growth solution. The lower the amount of H2PtCl6 used in the growth solution, the thinner the Pt shell grew, and the more high-index facets of concave Au NCs seeds were exposed in Au@Pt BNPs, leading to higher electrochemical activity. These as-prepared concave Au@Pt BNPs will open up new strategies for improving catalytic efficiency and reducing the use of the expensive and scarce resource of platinum in the ethanol oxidation reaction, and are potentially applicable as electrochemical catalysts for direct ethanol fuel cells.

  11. Synthesis of Au@Pt bimetallic nanoparticles with concave Au nanocuboids as seeds and their enhanced electrocatalytic properties in the ethanol oxidation reaction

    International Nuclear Information System (INIS)

    Tan, Lingyu; Li, Lidong; Peng, Yi; Guo, Lin

    2015-01-01

    Herein, a new type of uniform and well-structured Au@Pt bimetallic nanoparticles (BNPs) with highly active concave Au nanocuboids (NCs) as seeds was successfully synthesized by using the classic seed-mediated method. Electrochemical measurements were conducted to demonstrate their greatly enhanced catalytic performance in the ethanol oxidation reaction (EOR). It was found that the electrochemical performance for Au@Pt BNPs with the concave Au NCs as seeds, which were enclosed by {611}high-index facets, could be seven times higher than that of the Au@Pt bimetallic nanoparticles with regular spherical Au NPs as seeds. Furthermore, our findings show that the morphology and electrocatalytic activity of the Au@Pt BNPs can be tuned simply by changing the compositional ratios of the growth solution. The lower the amount of H_2PtCl_6 used in the growth solution, the thinner the Pt shell grew, and the more high-index facets of concave Au NCs seeds were exposed in Au@Pt BNPs, leading to higher electrochemical activity. These as-prepared concave Au@Pt BNPs will open up new strategies for improving catalytic efficiency and reducing the use of the expensive and scarce resource of platinum in the ethanol oxidation reaction, and are potentially applicable as electrochemical catalysts for direct ethanol fuel cells. (paper)

  12. Outline-based morphometrics, an overlooked method in arthropod studies?

    Science.gov (United States)

    Dujardin, Jean-Pierre; Kaba, D; Solano, P; Dupraz, M; McCoy, K D; Jaramillo-O, N

    2014-12-01

    Modern methods allow a geometric representation of forms, separating size and shape. In entomology, as well as in many other fields involving arthropod studies, shape variation has proved useful for species identification and population characterization. In medical entomology, it has been applied to very specific questions such as population structure, reinfestation of insecticide-treated areas and cryptic species recognition. For shape comparisons, great importance is given to the quality of landmarks in terms of comparability. Two conceptually and statistically separate approaches are: (i) landmark-based morphometrics, based on the relative position of a few anatomical "true" or "traditional" landmarks, and (ii) outline-based morphometrics, which captures the contour of forms through a sequence of close "pseudo-landmarks". Most of the studies on insects of medical, veterinary or economic importance make use of the landmark approach. The present survey makes a case for the outline method, here based on elliptic Fourier analysis. The collection of pseudo-landmarks may require the manual digitization of many points and, for this reason, might appear less attractive. It, however, has the ability to compare homologous organs or structures having no landmarks at all. This strength offers the possibility to study a wider range of anatomical structures and thus, a larger range of arthropods. We present a few examples highlighting its interest for separating close or cryptic species, or characterizing conspecific geographic populations, in a series of different vector organisms. In this simple application, i.e. the recognition of close or cryptic forms, the outline approach provided similar scores as those obtained by the landmark-based approach. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Schaum's outline of theory and problems of differential equations

    CERN Document Server

    Bronson, Richard

    1994-01-01

    If you want top grades and thorough understanding of differential equations, this powerful study tool is the best tutor you can have! It takes you step-by-step through the subject and gives you 563 accompanying problems with fully worked solutions. You also get plenty of practice problems to do on your own, working at your own speed. (Answers at the back show you how you're doing.) Famous for their clarity, wealth of illustrations and examples, and lack of dreary minutiae, Schaum’s Outlines have sold more than 30 million copies worldwide—and this guide will show you why!

  14. Outline of cost-benefit analysis and a case study

    Science.gov (United States)

    Kellizy, A.

    1978-01-01

    The methodology of cost-benefit analysis is reviewed and a case study involving solar cell technology is presented. Emphasis is placed on simplifying the technique in order to permit a technical person not trained in economics to undertake a cost-benefit study comparing alternative approaches to a given problem. The role of economic analysis in management decision making is discussed. In simplifying the methodology it was necessary to restrict the scope and applicability of this report. Additional considerations and constraints are outlined. Examples are worked out to demonstrate the principles. A computer program which performs the computational aspects appears in the appendix.

  15. An outline of Nirex's research and safety assessment programmes

    International Nuclear Information System (INIS)

    Saunders, P.A.H.

    1987-11-01

    This document outlines the safety studies being carried out by Nirex to ensure that radioactive wastes are disposed of in such a way that significant exposure of the public to radiation is at a minimum. The studies comprise experimental and theoretical work and mathematical modelling to predict performance over a long time-scale. Laboratory experiments are concerned with the immobilisation and packaging of wastes. Field studies provide information on radionuclide migration and the geology of possible repository sites. The results should ensure that waste disposal meets the exacting government safety standards. (U.K.)

  16. Outline of material accountancy system for Rokkasho reprocessing plant

    International Nuclear Information System (INIS)

    Kitamura, Touko; Yamazaki Yoshihiro; Ai, Hironobu

    2004-01-01

    In January 2004, Facility Attachment (FA) for Rokkasho Reprocessing Plant (RRP) was entered into force and the safeguards has been implemented in accordance with the FA. So operator must carry out the effectual material accountancy on the basis of facility operation. RRP is large and complex facility and operated based on automatic and remote system. For efficient material accounting viewpoint, the system especially automatic data collection is established using RRP computer network. The paper describes the outline of material accountancy system, the structure of RRP computer network including how to collect the source data, to convert the batch data and the reporting. (author)

  17. Outline of a fuel treatment facility in NUCEF

    International Nuclear Information System (INIS)

    Sugikawa, Susumu; Umeda, Miki; Kokusen, Junya

    1997-03-01

    This report presents outline of the nuclear fuel treatment facility for the purpose of preparing solution fuel used in Static Experiment Critical Facility (STACY) and Transient Experiment Critical Facility (TRACY) in Nuclear Fuel Cycle Safety Engineering Research Facility (NUCEF), including descriptions of process conditions and dimensions of major process equipments on dissolution system of oxide fuel, chemical adjustment system, purification system, acid recovery system, solution fuel storage system, and descriptions of safety design philosophy such as safety considerations of criticality, solvent fire, explosion of hydrogen and red-oil and so on. (author)

  18. An outline of the BIZET experiments and their interpretation

    International Nuclear Information System (INIS)

    Helm, F.; Sanders, J.E.

    1979-01-01

    The Paper provides a general description of the BIZET experiments carried out at Zebra under collaboration between the DeBeNe and UK Fast Reactor Projects. This programme included a large assembly representing the essential features of a conventional power reactor and also two cores incorporating internal breeder regions typifying current heterogeneous designs. Emphasis throughout was on validating predictions of reaction-rate distributions, control rod performance, and sodium-voiding reactivity. The scope of these measurements is outlined. A brief account is given of the data and methods being applied to the analysis of results. Conclusions drawn so far from the experiments and their evaluation are summarised. (author)

  19. Elaboration of the public services outline for energy

    International Nuclear Information System (INIS)

    Bailly, B.; Tabet, J.P.

    2000-01-01

    France's public services outline for energy for the next 20 years will be adopted by decree in the autumn of 2001. Halfway through the process, the authors present the main points of a document whose preparation testified to a new approach in the policies for national development. Regional discussions that commence this month should give rise to numerous debates, based most particularly on the capacity territorial organisations have to participate in respect to the rational usage and decentralized production of energy. At the time of international negotiations on climatic changes, the questions raised are very quickly becoming inescapable. (authors)

  20. Site-Selective Carving and Co-Deposition: Transformation of Ag Nanocubes into Concave Nanocrystals Encased by Au-Ag Alloy Frames.

    Science.gov (United States)

    Ahn, Jaewan; Wang, Daniel; Ding, Yong; Zhang, Jiawei; Qin, Dong

    2018-01-23

    We report a facile synthesis of Ag nanocubes with concave side faces and Au-Ag alloy frames, namely Ag@Au-Ag concave nanocrystals, by titrating HAuCl 4 solution into an aqueous mixture of Ag nanocubes, ascorbic acid (H 2 Asc), NaOH, and cetyltrimethylammonium chloride (CTAC) at an initial pH of 11.6 under ambient conditions. Different from all previous studies involving poly(vinylpyrrolidine), the use of CTAC at a sufficiently high concentration plays an essential role in carving away Ag atoms from the side faces through galvanic replacement. Concurrent co-deposition of Au and Ag atoms via chemical reduction at orthogonal sites on the surface of Ag nanocubes leads to the generation of Ag@Au-Ag concave nanocrystals with well-defined and controllable structures. Specifically, in the presence of CTAC-derived Cl - ions, the titrated HAuCl 4 is maintained in the AuCl 4 - species, enabling its galvanic replacement with the Ag atoms located on the side faces of nanocubes. The released Ag + ions can be retained in the soluble form of AgCl 2 - by complexing with the Cl - ions. Both the AuCl 4 - and AgCl 2 - in the solution are then reduced by ascorbate monoanion, a product of the neutralization reaction between H 2 Asc and NaOH, to Au and Ag atoms for their preferential co-deposition onto the edges and corners of the Ag nanocubes. Compared with Ag nanocubes, the Ag@Au-Ag concave nanocrystals exhibit much stronger SERS activity at an excitation of 785 nm, making it feasible to monitor the Au-catalyzed reduction of 4-nitrothiophenol by NaBH 4 in situ. When the Ag cores are removed, the concave nanocrystals evolve into Au-Ag nanoframes with controllable ridge thicknesses.

  1. Fr Luigi Giussani’s Concept of Education - an Outline

    Directory of Open Access Journals (Sweden)

    Alina Rynio

    2011-09-01

    Full Text Available This outline focuses on the multifarious academic, pedagogical and social activities of Fr Luigi Giussani, Professor of Theology, Italian thinker and scholar renowned for his numerous accomplishments. Due to his exceptional attentiveness, inquisitiveness and courage he has been certainly well-known and highly-regarded not only in university and ecclesiastical but also in the cultural and political spheres of life. The author of this study describes Fr Giussani as an exceptional scholar and educator emphasising the pedagogical aspect of his activities. The study explains his understanding of pedagogy and education. Selected achievements from his biography con fi rm Fr Giussani to be an exceptional human being, educator and scholar. As an educator, Fr Giussani holds a sober and realistic view of man and his formation: the true value of man, he claims, lies in being rational and free. Complete trust in God and great love for a human person de fi ne the most fundamental elements of his approach. The outline also includes a short biographical note and describes popular ways of education, formative events, the educators and educatee’s personality constituents, and the relationship between freedom, conscience, tradition and education.

  2. Risk factors which cause senile cataract evolvement: outline

    Directory of Open Access Journals (Sweden)

    E.V. Bragin

    2018-03-01

    Full Text Available Examination of natural ageing processes including those caused by multiple external factors has been attracting re-searchers' attention over the last years. Senile cataract is a multi-factor disease. Expenditure on cataract surgery remain one of the greatest expenses items in public health care. Age is a basic factor which causes senile cataract. Morbidity with cataract doubles each 10 years of life. This outline considers some literature sources which describe research results on influence exerted on cataract evolvement by such risk factors as age, sex, race, smoking, alcohol intake, pancreatic diabetes, intake of certain medications, a number of environmental factors including ultraviolet and ionizing radiation. mane of these factors are shown to increase or reduce senile cataract risk; there are conflicting data on certain factors. The outline also contains quantitative characteristics of cataract risks which are given via odds relation and evolve due to age parameters impacts, alcohol intake, ionizing radiation, etc. The authors also state that still there is no answer to the question whether dose-effect relationship for cataract evolvement is a threshold or non-threshold.

  3. Flat-ramp vs. convex-concave thrust geometries in a deformable hanging wall: new insights from analogue modeling experiments

    Science.gov (United States)

    Almeida, Pedro; Tomas, Ricardo; Rosas, Filipe; Duarte, Joao; Terrinha, Pedro

    2015-04-01

    Different modes of strain accommodation affecting a deformable hanging-wall in a flat-ramp-flat thrust system were previously addressed through several (sandbox) analog modeling studies, focusing on the influence of different variables, such as: a) thrust ramp dip angle and friction (Bonini et al, 2000); b) prescribed thickness of the hanging-wall (Koy and Maillot, 2007); and c) sin-thrust erosion (compensating for topographic thrust edification, e.g. Persson and Sokoutis, 2002). In the present work we reproduce the same experimental procedure to investigate the influence of two different parameters on hanging-wall deformation: 1) the geometry of the thrusting surface; and 2) the absence of a velocity discontinuity (VD) that is always present in previous similar analogue modeling studies. Considering the first variable we use two end member ramp geometries, flat-ramp-flat and convex-concave, to understand the control exerted by the abrupt ramp edges in the hanging-wall stress-strain distribution, comparing the obtain results with the situation in which such edge singularities are absent (convex-concave thrust ramp). Considering the second investigated parameter, our motivation was the recognition that the VD found in the different analogue modeling settings simply does not exist in nature, despite the fact that it has a major influence on strain accommodation in the deformable hanging-wall. We thus eliminate such apparatus artifact from our models and compare the obtained results with the previous ones. Our preliminary results suggest that both investigated variables play a non-negligible role on the structural style characterizing the hanging-wall deformation of convergent tectonic settings were such thrust-ramp systems were recognized. Acknowledgments This work was sponsored by the Fundação para a Ciência e a Tecnologia (FCT) through project MODELINK EXPL/GEO-GEO/0714/2013. Pedro Almeida wants to thank to FCT for the Ph.D. grant (SFRH/BD/52556/2014) under the

  4. Outline of research project on nuclear fusion, 1985

    International Nuclear Information System (INIS)

    Uchida, Taijiro

    1985-08-01

    When the advance of nuclear fusion research during 10 years hereafter is predicted, the next project should start the research toward nuclear burning, adopt the diversified ways, and develop the research in wide related fields. The central subject such as the containment of plasma is studies with large experimental facilities, but in the related fields, the research subsidies must be utilized positively. The organization to perform the research compries 6 groups, 1) reactor materials and plasma-wall interactions 2) science and engineering of tritium, and influence on living things, 4) development of superconducting magnets, 5) fusion blanket engineering, and 6) design and assessment of thermonuclear reactors. The distribution and management of the scientific research subsidy are explained. All of the subjects of planned and publicly invited research a listed, and the researchers concerned, the amount of subsidy, the objective and the plan of execution in fiscal year 1984 of each research are outlined. (J.P.N.)

  5. Outline of research project on nuclear fusion, 1984

    International Nuclear Information System (INIS)

    Uchida, Taijiro

    1984-08-01

    When the advance of nuclear fusion research during 10 years hereafter is predicted, the next project should start the research toward nuclear burning, adopt the diversified ways, a nd develop the research in wide related fields. The central subject such as the containment of plasma is studies with large experimental facilities, but in the related fields, the research subsidies must be utilized positively. The organization to perform the research compries 6 groups, 1) reactor materials and plasma-wall interaction, 2) science and engineering of tritium and influence on living things, 3) fundamentals of core control, 4) development of superconducting magnets, 5) fusion blanket engineering, and 6) design and assessment of thermonuclear reactors. The distribution and management of the scientific research subsidy are explained. All of the subjects of planned and publicly invited research a listed, and the researchers concerned, the amount of subsidy, the objective and the plan of execution in fiscal 1983 of each research are outlined. (J.P.N.)

  6. Outline of fast analyzer for MHD equilibrium 'FAME'

    International Nuclear Information System (INIS)

    Sakata, Shinya; Haginoya, Hirofumi; Tsuruoka, Takuya; Aoyagi, Tetsuo; Saito, Naoyuki; Harada, Hiroo; Tani, Keiji; Watanabe, Hideto.

    1994-03-01

    The FAME (Fast Analyzer for Magnetohydrodynamic (MHD) Equilibrium) system has been developed in order to provide more than 100 MHD equilibria in time series which are enough for the non-stationary analysis of the experimental data of JT-60 within about 20 minutes shot interval. The FAME is an MIMD type small scale parallel computer with 20 microprocessors which are connected by a multi-stage switching system. The maximum theoretical speed is 250 MFLOPS. For the software system of FAME, MHD equilibrium analysis code SELENE and its input data production code FBI are tuned up taking the parallel processing into consideration. Consequently, the computational performance of the FAME system becomes more than 7 times faster than the existing general purpose computer FACOM M780-10s. This report summarizes the outline of the FAME system including hardware, soft-ware and peripheral equipments. (author)

  7. Outline of human machine interface at Rokkasho reprocessing plant

    International Nuclear Information System (INIS)

    Niioka, T.; Miyazaki, T.; Fujita, D.; Esashika, A.; Yoshida, Y.; Nakamura, W.; Tochigi, T.; Yoshimoto, A.; Yokoi, M.

    2006-01-01

    The Japan Nuclear Fuel Limited (JNFL) has been performing the active tests since the end of March, 2006, for its Rokkasho Reprocessing Plant using the spent fuels retrieved from the Light Water Reactors. At the early stage of the tests relatively low burn-up fuels have been used, and the burn-up will be increased at later stages until the start of commercial operation planned next year. The plant is operated from the main control room in the Control Building, where two types of operator consoles are located for plant monitoring and operation. The Operator Interface Station (OIS) driven by computer systems is chiefly used for instrumentation and control for production activities during normal operation. In addition to this, safety panels composed of hardware circuits are installed for nuclear safety functions such as criticality safety management, explosion protection, and confinement of radioactive materials. This paper outlines the Human Machine Interface features applied to the Rokkasho Reprocessing Plant. (authors)

  8. Outlines of a multiple trace theory of temporal preparation.

    Science.gov (United States)

    Los, Sander A; Kruijne, Wouter; Meeter, Martijn

    2014-01-01

    We outline a new multiple trace theory of temporal preparation (MTP), which accounts for behavior in reaction time (RT) tasks in which the participant is presented with a warning stimulus (S1) followed by a target stimulus (S2) that requires a speeded response. The theory assumes that during the foreperiod (FP; the S1-S2 interval) inhibition is applied to prevent premature response, while a wave of activation occurs upon the presentation of S2. On each trial, these actions are stored in a separate memory trace, which, jointly with earlier formed memory traces, starts contributing to preparation on subsequent trials. We show that MTP accounts for classic effects in temporal preparation, including mean RT-FP functions observed under a variety of FP distributions and asymmetric sequential effects. We discuss the advantages of MTP over other accounts of these effects (trace-conditioning and hazard-based explanations) and suggest a critical experiment to empirically distinguish among them.

  9. An outline of ethics on the work of Michel Foucault

    DEFF Research Database (Denmark)

    Christensen, Gerd

    An outline of ethics on the work of Michel Foucault The French philosopher Michel Foucault is well known for his critical thinking and for his genealogies of the human subject. In these analyzes power and knowledge (power-knowledge) plays a decisive role. For Foucault power-knowledge is the very...... (Kelly (edt.) 1994). Nevertheless, Foucault ended his academic career discussing ethics in the form of ethos (Foucault 1994). In this form his ethical project approaches an aesthetic project in the form of the individual’s self-creation. In my presentation I will introduce Foucault’s concept of ethos...... and discuss the possibilities and limitations in this position. In addition, I will argue that his insistently critical stance and power-knowledge concept can be considered as an ethical stance different from both deontology and utilitarism. As such, it could have an important impact on the practice...

  10. CESAS: Computerized event sequence abstracting system outlines and applications

    International Nuclear Information System (INIS)

    Watanabe, N.; Kobayashi, K.; Fujiki, K.

    1990-01-01

    For the purpose of efficient utilization of the safety-related event information on the nuclear power plants, a new computer software package CESAS has been under development. CESAS is to systematically abstract the event sequence, that is a series of sequential and causal relationships between occurrences, from the event description written in natural language of English. This system is designed to be based on the knowledge engineering technique utilized in the field of natural language processing. The analytical process in this system consists of morphemic, syntactic, semantic, and syntagmatic analyses. At this moment, the first version of CESAS has been developed and applied to several real event descriptions for studying its feasibility. This paper describes the outlines of CESAS and one of analytical results in comparison with a manually-extracted event sequence

  11. An Outline History of Filmoteka Narodowa (the National Film Archive

    Directory of Open Access Journals (Sweden)

    Magdalena Niedźwiedzka

    2015-05-01

    Full Text Available The article shows an outline history of the oldest Polish institution collecting films. Filmoteka Narodowa started its activity in the 1950. and since then it is the only institution in Poland having such a wide holdings of films, especially feature films. The history of this institution shows, in some part, also the history of Polish cinematography. The collection of films is our national cultural heritage. The article describes the history of the institution, changes of its character; these are a reflection of changes in Polish cinematography that turned from a national company into one of the most commercial and lucrative branches of industry. A scope of operations of Filmoteka Narodowa in Warsaw, did not change diametrically since its funding. It is still a central institution, collecting and providing access to films, especially, but also film documentation, ephemerides connected with cinematography and photographs concerning history of Polish cinema.

  12. A Linear Programming Approach to Routing Control in Networks of Constrained Nonlinear Positive Systems with Concave Flow Rates

    Science.gov (United States)

    Arneson, Heather M.; Dousse, Nicholas; Langbort, Cedric

    2014-01-01

    We consider control design for positive compartmental systems in which each compartment's outflow rate is described by a concave function of the amount of material in the compartment.We address the problem of determining the routing of material between compartments to satisfy time-varying state constraints while ensuring that material reaches its intended destination over a finite time horizon. We give sufficient conditions for the existence of a time-varying state-dependent routing strategy which ensures that the closed-loop system satisfies basic network properties of positivity, conservation and interconnection while ensuring that capacity constraints are satisfied, when possible, or adjusted if a solution cannot be found. These conditions are formulated as a linear programming problem. Instances of this linear programming problem can be solved iteratively to generate a solution to the finite horizon routing problem. Results are given for the application of this control design method to an example problem. Key words: linear programming; control of networks; positive systems; controller constraints and structure.

  13. A wear simulation study of nanostructured CVD diamond-on-diamond articulation involving concave/convex mating surfaces

    Science.gov (United States)

    Baker, Paul A.; Thompson, Raymond G.; Catledge, Shane A.

    2015-01-01

    Using microwave-plasma Chemical Vapor Deposition (CVD), a 3-micron thick nanostructured-diamond (NSD) layer was deposited onto polished, convex and concave components that were machined from Ti-6Al-4V alloy. These components had the same radius of curvature, 25.4mm. Wear testing of the surfaces was performed by rotating articulation of the diamond-deposited surfaces (diamond-on-diamond) with a load of 225N for a total of 5 million cycles in bovine serum resulting in polishing of the diamond surface and formation of very shallow, linear wear grooves of less than 50nm depth. The two diamond surfaces remained adhered to the components and polished each other to an average surface roughness that was reduced by as much as a factor of 80 for the most polished region located at the center of the condyle. Imaging of the surfaces showed that the initial wearing-in phase of diamond was only beginning at the end of the 5 million cycles. Atomic force microscopy, scanning electron microscopy, Raman spectroscopy, and surface profilometry were used to characterize the surfaces and verify that the diamond remained intact and uniform over the surface, thereby protecting the underlying metal. These wear simulation results show that diamond deposition on Ti alloy has potential application for joint replacement devices with improved longevity over existing devices made of cobalt chrome and ultra-high molecular weight polyethylene (UHMWPE). PMID:26989457

  14. Evaluation of Parameters Affecting Magnetic Abrasive Finishing on Concave Freeform Surface of Al Alloy via RSM Method

    Directory of Open Access Journals (Sweden)

    Mehrdad Vahdati

    2016-01-01

    Full Text Available The attempts of researchers in industries to obtain accurate and high quality surfaces led to the invention of new methods of finishing. Magnetic abrasive finishing (MAF is a relatively new type of finishing in which the magnetic field is used to control the abrasive tools. Applications such as the surface of molds are ones of the parts which require very high surface smoothness. Usually this type of parts has freeform surface. In this study, the effect of magnetic abrasive process parameters on freeform surfaces of parts made of aluminum is examined. This method is obtained through combination of magnetic abrasive process and Control Numerical Computer (CNC. The use of simple hemisphere for installation on the flat area of the magnets as well as magnets’ spark in curve form is a measure done during testing the experiments. The design of experiments is based on response surface methodology. The gap, the rotational speed of the spindle, and the feed rate are found influential and regression equations governing the process are also determined. The impact of intensity of the magnetic field is obtained using the finite element software of Maxwell. Results show that in concave areas of the surface, generally speaking, the surface roughness decreases to 0.2 μm from its initial 1.3 μm roughness. However, in some points the lowest surface roughness of 0.08 μm was measured.

  15. Comparison between evaluations of the glenoid concavity by double oblique axial MR arthrography and clinical results in arthroscopic bankart repair

    International Nuclear Information System (INIS)

    Maeda, Shugo; Ishibashi, Yasuyuki; Tsuda, Eiichi; Yamamoto, Yuji; Toh, Satoshi; Sasaki, Taisuke

    2011-01-01

    The purpose of this study was to compare the findings obtained in the glenoid concavity by double oblique axial MR arthrography (DOA-MRA) and the clinical outcome after arthroscopic Bankart repair. The results in 57 shoulders of 50 patients who underwent arthroscopic Bankart repair were reviewed. The pre and postoperative lesions in the inferior glenohumeral ligament labrum complex (IGHLLC) were classified into 5 morphological types based on the DOA-MRA findings prominent (P), split (S), flat (F), detached (D), and capsular tear (C). The height and slope of the anterior labrum from the glenoid fossa were measured on the DOA-MRA images. The Japan Shoulder Society Shoulder Instability Score (JSS-SIS) system was used to evaluate the affected shoulder of all of the patients after surgery. There were no significant differences between the JSS-SISs of the shoulders in the P group, F group, and S+D group (recurrent Bankart lesion) 6 months postoperatively. There were significant increases in the slope and height of all of the shoulders as a whole between the preoperative period and 3 months postoperatively, but there were no statistically significant differences in the slope or height between 3 months and 6 months postoperatively. The initial capsulolabral buttress property was maintained at 6 months after arthroscopic Bankart repair, and there was no correlation between the morphology of the IGHLLC and the JSS-SISs. (author)

  16. Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

    International Nuclear Information System (INIS)

    Park, Jongho; Kim, Beomjoon

    2016-01-01

    Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

  17. Wavefront error measurement of the concave ellipsoidal mirrors of the METIS coronagraph on ESA Solar Orbiter mission

    Science.gov (United States)

    Sandri, P.

    2017-12-01

    The paper describes the alignment technique developed for the wavefront error measurement of ellipsoidal mirrors presenting a central hole. The achievement of a good alignment with a classic setup at the finite conjugates when mirrors are uncoated cannot be based on the identification and materialization at naked eye of the retro-reflected spot by the mirror under test as the intensity of the retro-reflected spot results to be ≈1E-3 of the intensity of the injected laser beam of the interferometer. We present the technique developed for the achievement of an accurate alignment in the setup at the finite conjugate even in condition of low intensity based on the use of an autocollimator adjustable in focus position and a small polished flat surface on the rear side of the mirror. The technique for the alignment has successfully been used for the optical test of the concave ellipsoidal mirrors of the METIS coronagraph of the ESA Solar Orbiter mission. The presented method results to be advantageous in terms of precision and of time saving also when the mirrors are reflective coated and integrated into their mechanical hardware.

  18. [Strut fracture of a convex-concave 60 degree Björk-Shiley mitral valve prosthesis 5 years after implantation--metallurgic analysis of the prosthesis strut].

    Science.gov (United States)

    Lemke, B; Rathmann, J; Wiebe, V; Witzel, U

    1991-08-01

    Acute mechanical failure of prosthetic heart valves is rare, but associated with high mortality when occurring. For convexo-concave Björk-Shiley prostheses only fractures of the outlet strut are reported. We present a case of lethal mechanical complication 5 years after implantation. By additional metallurgic analysis we were able to identify a sequential course of the outlet strut fracture. This could lead to new approaches for early detection of this complication.

  19. Outline of recent studies on dosimetry for external radiations

    International Nuclear Information System (INIS)

    Yamaguchi, Yasuhiro; Iwai, Satoshi.

    1995-01-01

    On the opportunity of adopting the new basic recommendation of ICRP in 1990, the research on the method of evaluating external radiation exposure dose has become to be carried out actively. In this recommendation, the definition of the dose used for radiation protection was changed largely, accordingly, the necessity to prepare the dose conversion factor based on the new definition and so on has arisen. Also in Japan, the research for this purpose has been carried out, and in January, 1995, the workshop on the recent method for evaluating external radiation exposure dose was held at Japan Atomic Energy Research Institute. In this report, the contents discussed at the workshop and the outline of the recent studies on this subject are described. As the international trend of dose evaluation, the recommendation of ICRP in 1990, the ICRU report 51 and the ICRP publication 71 by the joint ICRP/ICRU task group are introduced. In Japan, the studies have been advanced centering around the reassessment of dose conversion factors for photons, electrons and neutrons. The dose evaluation for photons, electrons and neutrons, and the dose evaluation around high energy accelerators are explained. Many problems to be solved still remain as the subjects of research for hereafter. (K.I.)

  20. Outlining a preventive oral health care system for China.

    Science.gov (United States)

    Saekel, Rüdiger

    2015-01-01

    The most recent Chinese health care reform, scheduled to run until 2020, has been underway for a number of years. Oral health care has not been explicitly mentioned in the context of this reform. However, oral health is an integral part of general health and the under-servicing of the Chinese population in the area of dental care is particularly high. The article describes how this problem could be addressed. Based on present scientific knowledge,specifically on evidence-based strategies and long-term empirical experience from Western industrialised countries, as well as findings from Chinese pilot studies, the author outlines a preventive oral health care system tailored specifically to the conditions prevailing in China. He describes the background and rationale for a clearly structured, preventive system and summarises the scientific cornerstones on which this concept is founded. The single steps of this model, that are adapted specifically to China, are presented so as to facilitate a critical discussion on the pros and cons of the approach. The author concludes that, by implementing preventive oral care, China could gradually reduce the under-servicing of great parts of the population with dental care that largely avoids dental disease and preserves teeth at a price that is affordable to both public health and patients. This approach would minimise the danger of starting a cycle of re-restorations, owing to outdated treatment methods. The proposal would both fit in well with and add to the current blueprint for Chinese health care reform.

  1. Outlines of a Multiple Trace Theory of Temporal Preparation

    Directory of Open Access Journals (Sweden)

    Sander A. Los

    2014-09-01

    Full Text Available We outline a new multiple trace theory of temporal preparation (MTP, which accounts for behavior in reaction time tasks in which the participant is presented with a warning stimulus (S1 followed by a target stimulus (S2 that requires a speeded response. The theory assumes that during the foreperiod (the S1 – S2 interval inhibition is applied to prevent premature response, while a wave of activation occurs upon the presentation of S2. On each trial, these actions are stored in a separate memory trace, which, jointly with earlier formed memory traces, starts contributing to preparation on subsequent trials. We show that MTP accounts for classic effects in temporal preparation, including mean reaction time – foreperiod functions observed under a variety of foreperiod distributions and asymmetric sequential effects. We discuss the advantages of MTP over other accounts of these effects (trace-conditioning and hazard-based explanations and suggest a critical experiment to empirically distinguish among them.

  2. Summary outline of ERDA geosciences and geoscience-related research

    International Nuclear Information System (INIS)

    1976-08-01

    The Division of Biomedical and Environmental Research (DBER) supports long-range, basic geosciences research in those areas of the life sciences which are relevant to current or planned ERDA programs. A central objective of the DBER geosciences program is to understand the mechanisms by which radionuclides and non-nuclear pollutants move through and interact with ecological systems including the air, land, inland waters, and oceans. Principal areas of interest include, in the field of atmospheric sciences: studies of the troposphere, particle formation, particulate matter, behavior of aerosols and gases, atmospheric transport and diffusion of fossil fuel pollutants, radionuclides, radionuclide global distribution patterns, nuclear emergency response systems, precipitation scavenging and dry deposition, regional relationships between pollutant sources and ambient atmospheric concentrations; and oceanographic studies of radioactivity that may be directly added to the environment from waste disposal activities and reactor operations or indirectly from nuclear explosions and transportation, the source term characterization, transport, fate, and effects of these pollutants in the marine environment; and studies of thermal effects on biological systems, mixing and circulation of water, distribution of radionuclides in ocean waters and sediments, and geochronology.A summary outline of the research programs is presented

  3. Construction of reactor and outline of breaking state

    International Nuclear Information System (INIS)

    Imanaka, Tetsuji

    1980-01-01

    The Mihama No. 1 reactor of Kansai Electric Power Co., Inc., is the first power-generating PWR in Japan, and it commenced the commercial operation in November, 1970. In June, 1972, the leak of steam generator tubes occurred, and the reactor was stopped for about a half year. In the second periodic inspection in March, 1973, the accident of broken fuel rods was discovered, but it was generally published in December, 1976. In August, 1974, the leak of steam generator tubes occurred again, and since then, the reactor was stopped for a long period. From October, 1978, the reactor has entered the test operation called cycling operation. The Kyoto University Reactor Research Institute lent the cask for transporting the broken pieces of the fuel rods to Kansai Electric Power Co., and obtained the investigation report of Japan Atomic Energy Research Institute, Based on the contract. The accident investigation group of the KURRI has pursued the causes of the accident and examined the propriety of the countermeasures. The outline of the construction of the reactor is described. The upper part of two fuel rods broke and fell on the baffle supporting plate. The broken fuel assembly was named C-34. About a half of fuel pellets and the cladding tube of several tens cm have not yet recovered. The state of break and the presumption of the causes are reported. (Kako, I.)

  4. JAERI Material Performance Database (JMPD); outline of the system

    International Nuclear Information System (INIS)

    Yokoyama, Norio; Tsukada, Takashi; Nakajima, Hajime.

    1991-01-01

    JAERI Material Performance Database (JMPD) has been developed since 1986 in JAERI with a view to utilizing the various kinds of characteristic data of nuclear materials efficiently. Management system of relational database, PLANNER was employed and supporting systems for data retrieval and output were expanded. JMPD is currently serving the following data; (1) Data yielded from the research activities of JAERI including fatigue crack growth data of LWR pressure vessel materials as well as creep and fatigue data of the alloy developed for the High Temperature Gas-cooled Reactor (HTGR), Hastelloy XR. (2) Data of environmentally assisted cracking of LWR materials arranged by Electric power Research Institute (EPRI) including fatigue crack growth data (3000 tests), stress corrosion data (500 tests) and Slow Strain Rate Technique (SSRT) data (1000 tests). In order to improve user-friendliness of retrieval system, the menu selection type procedures have been developed where knowledge of system and data structures are not required for end-users. In addition a retrieval via database commands, Structured Query Language (SQL), is supported by the relational database management system. In JMPD the retrieved data can be processed readily through supporting systems for graphical and statistical analyses. The present report outlines JMPD and describes procedures for data retrieval and analyses by utilizing JMPD. (author)

  5. Outline of additional installation works in Oi Nuclear Power Station

    International Nuclear Information System (INIS)

    Shibata, Atsuo; Matsuoka, Motokazu

    1987-01-01

    At present in Oi Nuclear Power Station, Kansai Electric Power Co., Inc., No.1 and No.2 plants of 1175 MWe each are in operation. In order to stabilize power supply for a long term, the additional installation of No.3 and No.4 plants of 1180 MWe each is in progress. The No.3 and No.4 plants are PWRs, for which prestressed concrete reactor containment vessels were adopted, and the start of operation is scheduled in October, 1991 in No.3 plant and in August, 1992 in No.4 plant. In the execution of main construction works, the preservation of the existing plants is the most important. For excavating the tunnels for seawater channels, tunnel boring machines were used, to avoid blasting. Pneumatic caisson method was adopted for a part of the circulating pump building. No vibration, no noise piling method was adopted for respective sheathing construction. The blasting vibration control in the excavation for foundations and the analysis of the behavior of retaining walls are to be carried out by information-oriented work execution. The outline of the main construction works and the preservation of the existing facilities are reported. (Kako, I.)

  6. The Fukushima Event: The Outline and the Technological Background

    Directory of Open Access Journals (Sweden)

    Francesco D'Auria

    2012-01-01

    Full Text Available The paper deals with the evaluation of the Fukushima-Daiichi Nuclear Power Plant (NPP accident in Units 1 to 4: an attempt is made to discuss the scenario within a technological framework, considering precursory documented regulations and predictable system performance. An outline is given at first of the NPP layout and of the sequence of major events. Then, plausible time evolutions of relevant quantities in the different Units, is inferred based on results from the application of numerical codes. Scenarios happening in the primary circuit and containment (three Units involved are distinguished from scenarios in spent fuel pool (four Units involved. Radiological releases to the environment and doses are approximately estimated. The event is originated by a natural catastrophe with almost simultaneous occurrence of earthquake and tsunami. These caused heavy destruction in a region in Japan much wider than the land around the NPP which was affected by the nuclear contamination. Key outcome from the work is the demonstration of strength for nuclear technology; looking at the past, misleading Probabilistic Safety Assessment (PSA data and inadequacy in licensing processes have been found. Looking into the future keywords are Emergency Rescue Team (ERT, Enhanced Human Performance (EHP, and Robotics in Nuclear Safety and Security (RNSS.

  7. Outlines of revised regulation standards for experimental research reactors

    International Nuclear Information System (INIS)

    Hohara, Shinya

    2015-01-01

    In response to the accident of TEPCO Fukushima Daiichi Nuclear Power Station, the government took actions through the revision of regulatory standards as well as the complete separation of regulation administrative department from promotion administrative department. The Nuclear and Industrial Safety Agency of the Ministry of Economy, Trade and Industry, which has been in charge of the regulations of commercial reactors, and the Office of Nuclear Regulations of the Ministry of Education, Culture, Sports, Science and Technology, which has been in charge of the regulations of reactors for experiment and research, were separated from both ministries, and integrated into the Nuclear Regulation Authority, which was newly established as the affiliated agency of the Ministry of the Environment. As for the revision of regulations and standards, the Nuclear Safety Commission was dismantled, and regulation enacting authority was given to the new Nuclear Regulation Authority, and the regulations that stipulated new regulatory standards were enacted. This paper outlines the contents of regulations related mainly to the reactors for experiment and research, and explains the following: (1) retroactive application of the new regulatory standards to existing reactor facilities, (2) examinations at the Nuclear Regulatory Agency, (3) procedures to confirm the compliance to the new standards, (4) seismic design classification, and (5) importance classification of safety function. (A.O.)

  8. Outline of electric power facility plan in fiscal year 1988

    International Nuclear Information System (INIS)

    1988-01-01

    As to the electric power facility plan in fiscal year 1988, 15 designated electric power enterprises made the notification to the Minister of International Trade and Industry in March, 1988. This outline of the facility plan summarized the plans of 66 enterprises in total, including the plans of municipally operated, joint thermal power and other enterprises in addition to the above 15. In order to ensure the stable supply of electric power, the Ministry of International Trade and Industry considers that it is indispensable to purposefully develop electric power sources and the facilities for distribution along this facility plan. The forecast for fiscal year 1997 is : total electric power demand 778.2 billion kWh, maximum power demand 151.21 million kW, and yearly load factor 56.9 %. This is equivalent to the yearly growth of 2.4 %. In fiscal year 1988, it is planned to present 29 plants of 2760 MW to the Power Source Development Coordination Council. The breakdown is : hydroelectricity 140 MW, thermal power 2010 MW, and nuclear power 610 MW. The Ministry guides electric power enterprises so as to realize the diversification of electric power sources. Also the increase of transmission and transformation facilities, the plan of equipment investment and others are reported. (Kako, I.)

  9. The improvement of GaN-based LED grown on concave nano-pattern sapphire substrate with SiO2 blocking layer

    International Nuclear Information System (INIS)

    Lin, Jyun-Hao; Huang, Shyh-Jer; Su, Yan-Kuin; Huang, Kai-Wen

    2015-01-01

    Highlights: • Concave nano-patterned sapphire substrates with SiO 2 blocking layer. • The IQE is almost two times larger than that of conventional one. • The EQE was extremely enhanced more than 100%. - Abstract: In contrast to convex nano-pattern sapphire substrates (NPSS), which are frequently used to fabricate high-quality nitride-based light-emitting diodes (LEDs), concave NPSS have been paid relatively less attention. In this study, a concave NPSS was fabricated, and its nitride epitaxial growth process was evaluated in a step by step manner. A SiO 2 layer was used to avoid nucleation over the sidewall and bottom of the nano-patterns to reduce dislocation reformation. Traditional LED structures were grown on the NPSS layer to determine its influence on device performance. X-ray diffraction, etched pit density, inverse leakage current, and internal quantum efficiency (IQE) results showed that dislocations and non-radiative recombination centers are reduced by the NPSS constructed with a SiO 2 blocking layer. An IQE twice that on a planar substrate was also achieved; such a high IQE significantly enhanced the external quantum efficiency of the resultant device. Taken together, the results demonstrate that the SiO 2 blocking layer proposed in this work can enhance the performance of LEDs.

  10. 太阳能技术在“绿色凹宅”中的应用%Application of Solar Energy Technology in Green Concave House

    Institute of Scientific and Technical Information of China (English)

    莫理莉

    2014-01-01

    This paper introduced the application of solar energy technology in green concave house.The grid-connection photovoltaic power generation was used,which sent the redundant power back to the power network.The photovoltaic solar-thermal integrated solar panels provided the output of electricity and daily at the same time.The smart home system provided the comfortable environment for green concave house.The green concave house is a successful and low energy consumption example,which could provide references for the area of abundant solar energy and dispersal residence.%介绍了太阳能技术在“绿色凹宅”中的应用。采用的并网型太阳能光伏发电系统,当有余电时可回馈电网。铺设的光伏光热一体化太阳能板,在电力输出的同时提供生活热水。智能家居系统给“绿色凹宅”提供舒适的环境。“绿色凹宅”是一个比较成功的环保、低能耗的住宅实例,对太阳能资源丰富而又居住分散的地区有很好的借鉴意义。

  11. A new signal restoration method based on deconvolution of the Point Spread Function (PSF) for the Flat-Field Holographic Concave Grating UV spectrometer system

    Science.gov (United States)

    Dai, Honglin; Luo, Yongdao

    2013-12-01

    In recent years, with the development of the Flat-Field Holographic Concave Grating, they are adopted by all kinds of UV spectrometers. By means of single optical surface, the Flat-Field Holographic Concave Grating can implement dispersion and imaging that make the UV spectrometer system design quite compact. However, the calibration of the Flat-Field Holographic Concave Grating is very difficult. Various factors make its imaging quality difficult to be guaranteed. So we have to process the spectrum signal with signal restoration before using it. Guiding by the theory of signals and systems, and after a series of experiments, we found that our UV spectrometer system is a Linear Space- Variant System. It means that we have to measure PSF of every pixel of the system which contains thousands of pixels. Obviously, that's a large amount of calculation .For dealing with this problem, we proposes a novel signal restoration method. This method divides the system into several Linear Space-Invariant subsystems and then makes signal restoration with PSFs. Our experiments turn out that this method is effective and inexpensive.

  12. Ribosomal protein L5 has a highly twisted concave surface and flexible arms responsible for rRNA binding.

    Science.gov (United States)

    Nakashima, T; Yao, M; Kawamura, S; Iwasaki, K; Kimura, M; Tanaka, I

    2001-05-01

    Ribosomal protein L5 is a 5S rRNA binding protein in the large subunit and plays an essential role in the promotion of a particular conformation of 5S rRNA. The crystal structure of the ribosomal protein L5 from Bacillus stearothermophilus has been determined at 1.8 A resolution. The molecule consists of a five-stranded antiparallel beta-sheet and four alpha-helices, which fold in a way that is topologically similar to the ribonucleoprotein (RNP) domain. The molecular shape and electrostatic representation suggest that the concave surface and loop regions are involved in 5S rRNA binding. To identify amino acid residues responsible for 5S rRNA binding, we made use of Ala-scanning mutagenesis of evolutionarily conserved amino acids occurring in the beta-strands and loop regions. The mutations of Asn37 at the beta1-strand and Gln63 at the loop between helix 2 and beta3-strand as well as that of Phe77 at the tip of the loop structure between the beta2- and beta3-strands caused a significant reduction in 5S rRNA binding. In addition, the mutations of Thr90 on the beta3-strand and Ile141 and Asp144 at the loop between beta4- and beta5-strands moderately reduced the 5S rRNA-binding affinity. Comparison of these results with the more recently analyzed structure of the 50S subunit from Haloarcula marismortui suggests that there are significant differences in the structure at N- and C-terminal regions and probably in the 5S rRNA binding.

  13. Strut fracture of Björk-Shiley convexo-concave valve in Japan--risk of small valve size--.

    Science.gov (United States)

    Watarida, S; Shiraishi, S; Nishi, T; Imura, M; Yamamoto, Y; Hirokawa, R; Fujita, M

    2001-08-01

    The Björk-Shiley convexo-concave (BSCC) prosthetic valve was introduced in 1979. Between 1979 and 1986, approximately 86,000 BSCC valves were implanted. By December 31, 1994, 564 complete strut fractures had been reported to the manufacture. We experienced a case of an outlet strut fracture and investigated the risk of BSCC prosthetic valve fractures in Japan. To investigate the risk factor of a strut fracture in Japan, we investigated published cases of strut fractures. Between 1979 and 1986, 2021 BSCC valves were implanted in Japan. By January 31, 2000, 11 complete strut fractures of 60-degree BSCC valves including our case had occurred. The patients were eight males and three females. The average age at valve replacement was 42.4+/-8.1 years, and nine of eleven (81.8%) were patients valve fractured was 47.7+/-6.4 years, and eight of eleven (72.7%) were patients valve were 27 mm (n=5) (45.5%), 29 mm (n=3) (27.2%), and 31 mm (n=3) (27.2%). Four patients died and seven patients survived. Although only 11 BSCC valve struts fractured and statistical analysis could not be performed, our findings suggest that the high risk group for a strut fracture in Japan is young male patients with a mitral valve, >= 27 mm in size with BSCC models manufactured before March 1982. When following-up patients with BSCC models manufactured before March 1982, the possibility of a strut fracture in all BSCC valve sizes should be kept in mind.

  14. Outline and current status of crack growth evaluation

    International Nuclear Information System (INIS)

    Arai, Taku

    2017-01-01

    This paper explains the outline of crack growth evaluation against stress corrosion cracking (SCC), knowledge obtained from actual equipment failure cases, and the latest trends of technology development concerning crack growth evaluation. As for the reactor integrity evaluation system, the use of the maintenance standards for the nuclear power generation of the Japan Society of Mechanical Engineers (hereinafter referred to as maintenance standards') is specified for its evaluation. Based on whether or not the result satisfies the evaluation criteria for the SCC soundness assessment, it is judged whether continuous operation within the evaluation period is allowed or repair/replacement is required. According to main findings obtained from the cases of actual equipment failure, the following have been recognized. (1) The SCC generated and developed in the nickel base alloy welded metal stayed at the boundary between low alloy steel and stainless steel. (2) The progress of SCC strongly depends on the growth direction of dendrite, which is the welded solidified structure, and preferentially develops in the direction parallel to the growth direction. The latest development of crack propagation evaluation includes (1) development of solution for stress intensity factor, and (2) crack propagation evaluation by means of FEM analysis. With regard to the SCC of stainless steel in recirculation system piping under BWR environment, if the defect depth and surface length are sized, the progress of cracks in the actual equipment can be reproduced to some extent by crack growth according to maintenance standards. The sizing results of the defect based on non-destructive test are the starting point. (A.O.)

  15. IAEA outlines measures to enhance protection against nuclear terrorism

    International Nuclear Information System (INIS)

    2001-01-01

    Mr. ElBaradei, head of the IAEA presented a report today to the Agency's Board of Governors, outlining plans for substantially expanding and strengthening IAEA programmes relevant to improving nuclear security. The report addresses the IAEA's response to the following threats from acts of nuclear terrorism by a subnational group: acquisition of a nuclear weapon; acquisition of nuclear material to construct a nuclear weapon or to cause a radiological hazard; acquisition of other radioactive materials to cause a radiological hazard; and violent acts against nuclear facilities to cause a radiological hazard. The report puts a price tag on its proposed programme upgrades at $30-50 million per year, representing an initial 10-15% increase in the IAEA's overall resources. Additionally, Mr. ElBaradei said the IAEA's budget is currently underfeed by about $40 million due to a budgetary policy over many years of 'zero real growth', and called on Member States to provide the resources required to cope with the newly emerging threat. 'In addition to the resources required for urgent international assistance,' Mr. ElBaradei said, 'the necessary global upgrades to meet the full range of possible threats would be in the range of hundreds of millions of dollars and would have to be carried out by individual States and through bilateral and multilateral assistance'. The IAEA would play a coordinating role in delivering this assistance.If States provide adequate funding, Mr. ElBaradei predicts that the enhanced and additional activities proposed in his report should lead over time to a powerful national and international security framework for nuclear facilities and material. The Summary of Report on 'Protection Against Nuclear Terrorism' presented to the IAEA Board of Governors on 30.11.2001 is attached

  16. Outlines for energy policy. Government bill 1980/81:90

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    Proposals for energy policy are made on to 1990. The essential thing is to reduce oil dependence. The program will be brought up under reconsideration in about 1985. The use of energy is calculated to be 400-430 TWh for 1990 and the substitute for oil to be about 9 million ton. An additional contribution to the capital of Svenska Petroleum AB by 225 million SEK and increase of government guarantees to 4000 million SEK for oil extraction are proposed. A cautious introduction of coal is recommended. Another proposal concerns the construction of plants which yearly use 180 TJ so that they can be fired with solid fuels. The use of domestic fuels is recommended and the supply of heat to the metropolitan areas is dealt with. The requirements of electric power in the year 1990 are calculated to be 134 TWh with 65 TWh as hydroelectric power. The establishment of a new authority for management of used nuclear fuel is suggested. An outline for the reorganisation of the energy authorities is given. The new organisation should come into action by 1st of July 1982. A three year program of energy research is presented for the years 1981 to 1984 amounting to 1400 million SEK. The financing of the research is to be covered by a special charge on oil products of 19 SEK per m/sup 3/. The security of nuclear power plants has to be improved and the measures of protection in case of accidents are dealt with. A revision of the program of oil storage is proposed to be carried out.

  17. Real Estate Course Outlines--Principles, Appraisal, Finance, Law, Math, Property Management, Investments, Marketing, Brokerage.

    Science.gov (United States)

    Lyon, Robert

    This series of course outlines was developed by the Texas Real Estate Research Center to help instructors in developing courses in compliance with the Texas Real Estate License Act Section 7(a). The outlines are general in nature and designed to serve as the basis for the development of a comprehensive course outline based on the texts and…

  18. Thermal-hydraulic performance of a multiple jet cooling module with a concave dimple array in a helium-cooled divertor

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hyo-Yeon; Kim, Kwang-Yong, E-mail: kykim@inha.ac.kr

    2017-01-15

    A numerical study was performed to evaluate the thermal-hydraulic performance of a finger type cooling module, where multiple jets impinge on the surface with concave dimples, in the divertor of a nuclear fusion reactor. Conjugate heat transfer was analyzed in both the solid and fluid domains using three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model. The computational domain consisted of a single fluid domain and three solid domains: tile, thimble, and cartridge. The numerical results for the temperature variation on the tile were validated in comparison with the experimental data. A parametric study was performed with two design variables, the ratios of dimple diameter and dimple height to the nozzle diameter, and two dimple arrays (inline and staggered arrays). The parametric study showed that the heat transfer rate was increased by up to 2.62% by introducing concave dimples, and that the heat transfer and pressure drop performances increased with increasing diameter and height of the dimples for a specified dimple array.

  19. Network chemistry, network toxicology, network informatics, and network behavioristics: A scientific outline

    OpenAIRE

    WenJun Zhang

    2016-01-01

    In present study, I proposed some new sciences: network chemistry, network toxicology, network informatics, and network behavioristics. The aims, scope and scientific foundation of these sciences are outlined.

  20. Topic Outlines in Microbiology: An Instructor's Guide for Junior and Community Colleges.

    Science.gov (United States)

    American Society for Microbiology, Washington, DC.

    This resource guide presents subject matter organized in outline form for four topical areas: introductory microbiology; medical microbiology; microbial genetics; and microbial physiology. The first two units comprise the two most frequently taught microbiology courses in community and junior colleges. The outlines for microbial genetics and…

  1. The Influence of Instructions, Outlines, and Illustrations on the Comprehension and Recall of Scientific Texts.

    Science.gov (United States)

    Balluerka, Nekane

    1995-01-01

    Effects of 3 different instructional aids on the acquisition of information from a scientific passage were studied with 104 Spanish undergraduates. Written instructions, preparing a written outline, and seeing an illustration all led to higher performance. The outline condition led to the highest performance for questions requiring information…

  2. Use of photogrammetry for taking the outline of patients in radiotherapy

    International Nuclear Information System (INIS)

    Borel, F.; Defer, J.; Aget, H.; Gallet, O.; Urbajtel, M.; Laugier, A.

    1975-01-01

    A photogrammetric method for taking the outline of patients in radiotherapy is described. Using only one couple of photographs, this fast and very precise process may reconstruct many transversal or longitudinal cross-sections, after a photographic storage of information. An automatic numerical reading of the outline may be directly fed into a computer for dosimetry [fr

  3. Het effect van een elektronische outline-tool op het schrijfproduct en schrijfproces

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2012-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Leijten, M., & Kirschner, P. A. (2012, June). Het effect van een elektronische outline-tool op het schrijfproduct en schrijfproces [The effect of an electronic outline tool on the writing product and writing process]. In R. Brouwer (Chair), Omgaan met ICT:

  4. Radiographic detection of single-leg fracture in Björk-Shiley Convexo-Concave prosthetic valves: a phantom model study.

    Science.gov (United States)

    Gilchrist, I C; Cardella, J F; Fox, P S; Pae, W E; el-Ghamry Sabe, A A; Landis, J R; Localio, A R; Kunselman, A R; Hopper, K D

    1997-02-01

    Cineradiography can identify patients with single-leg fractured Björk-Shiley Convexo-Concave valves, although little is known about the sensitivity and specificity of this technique. We evaluated three normal and six (0 microm gap) single-leg fractured Björk-Shiley valves that were placed in a working phantom model. Valves were randomly imaged a total of 33 times and duplicated into a 120-valve series with a 1:9 ratio of abnormal/normal valves. Six reviewers independently graded each valve and demonstrated markedly different rates of identifying the fractured valves. Average sensitivity at the grade that clinically results in valve explanation was 47%. Among the normal valves, a correct identification was made 96% (range 91% to 99%) of the time. Present radiographic technology may have significant difficulty in identifying true single-leg fracture in Björk-Shiley valves with limb separations that are common among clinically explanted valves.

  5. 3D modelling of interaction of strongly nonlinear internal seiches with a concave lake topography and a phenomenon of the "lake monsters".

    Science.gov (United States)

    Terletska, Kateryna; Maderich, Vladimir; Brovchenko, Igor; Jung, Kyung Tae

    2013-04-01

    In the freshwater lakes in moderate latitudes stratification occurs as a result of the seasonal warming of the surface water layer. Than the intense wind surges (usually in autumn) tilt the surface and generate long basin-scale low-frequency standing internal waves (seiches). Depending on the initial interface tilt and stratification wide spectra of possible flow regimes can be observed [1]-[2].They varied from small amplitude symmetric seiches to large amplitude nonlinear waves.Nonlinearity leads to an asymmetry of internal waves and appearance of the surge or bore and further disintegration of it on a sequence of solitary waves. In present study degeneration of the strongly nonlinear internal seiches in elongated lakes with a concave "spoon-like" topography is investigated.Two different three-dimensional non-hydrostatic free-surface numerical models are used to investigate degeneration of large internal waves and its subsequent interaction with the concave lake slope. One of this model is non-hydrostatic model [3] and the other is a well-known MIT model. At first we consider idealized elongated elliptic-shape lake with the dimension of 5 km X 1 km with the maximal depth 30 m. The stratification in lake is assumed to be given in a form of the tangent function with a density difference between upper and lower layers 2 kgm-3 . It is assumed that motion in such lake is initiated by inclination of thermocline on a certain angle. Than lake adjusts to return to its original state producing internal seiches which begin interacting with a bottom topography. The process of degeneration of internal seiches in the lake with concave ends consist of chain of elementary processes: 1) steeping of long basin scale large amplitude wave, that evolve into internal surge, 2) surge interact with concave lake ends that leads the concentration of the flow and formation of down slope bottom jet along the lake axis, 3) due to cumulative effect local velocity in the jet accelerates up to

  6. An automated three-dimensional detection and segmentation method for touching cells by integrating concave points clustering and random walker algorithm.

    Directory of Open Access Journals (Sweden)

    Yong He

    Full Text Available Characterizing cytoarchitecture is crucial for understanding brain functions and neural diseases. In neuroanatomy, it is an important task to accurately extract cell populations' centroids and contours. Recent advances have permitted imaging at single cell resolution for an entire mouse brain using the Nissl staining method. However, it is difficult to precisely segment numerous cells, especially those cells touching each other. As presented herein, we have developed an automated three-dimensional detection and segmentation method applied to the Nissl staining data, with the following two key steps: 1 concave points clustering to determine the seed points of touching cells; and 2 random walker segmentation to obtain cell contours. Also, we have evaluated the performance of our proposed method with several mouse brain datasets, which were captured with the micro-optical sectioning tomography imaging system, and the datasets include closely touching cells. Comparing with traditional detection and segmentation methods, our approach shows promising detection accuracy and high robustness.

  7. Outlet strut fracture of Björk-Shiley convexo-concave valves: can valve-manufacturing characteristics explain the risk?

    Science.gov (United States)

    Omar, R Z; Morton, L S; Beirne, M; Blot, W J; Lawford, P V; Hose, R; Taylor, K M

    2001-06-01

    Björk-Shiley 60 degrees convexo-concave prosthetic heart valves (Shiley, Inc, Irvine, Calif, a subsidiary of Pfizer, Inc) continue to be a concern for approximately 35,000 nonexplanted patients worldwide, with approximately 600 events reported to the manufacturer to date. Fractures of the outlet struts of the valves began to appear in the early 1980s and have continued to the present, but their causes are only partially understood. A matched case-control study was conducted evaluating manufacturing records for 52 valves with outlet strut fractures and 248 control subjects matched for age at implantation, valve size, and valve position. In addition to the risk factors recognized as determinants of outlet strut fracture, the United Kingdom case-control study has observed 7- to 9-fold increased risk with performance of multiple hook deflection tests. This test was performed more than once, usually after rework on the valve. Six valves in this study underwent multiple hook deflection tests, of which 4 experienced an outlet strut fracture. Cracks and further rework were noted for these valves. Significant associations were also observed between outlet strut fracture and disc-to-strut gap measurements taken before the attachment of the sewing ring. It is our view that a combination of factors related to valve design, manufacturing process, and patient characteristics are responsible for outlet strut fractures of Björk-Shiley convexo-concave valves. Multiple hook deflection tests have emerged as a potential new risk factor for outlet strut fracture in both The Netherlands and the United Kingdom. This factor appears to be correlated with the presence of other abnormalities. A further study is needed to investigate the factors correlated with multiple hook deflection tests. On confirmation of risk, the presence of multiple hook deflection tests may be added to equations, quantifying the risk of outlet strut fracture for comparison against risk of mortality and serious

  8. Longitudinal study of iris concavity, corneal biomechanics, and correlations to ocular biometry in a cohort of 10- to 12-year-old UK schoolboys: 2-year follow-up data.

    Science.gov (United States)

    Shah, Ameet; Lascaratos, Gerassimos; Garway-Heath, David F; Foster, Paul J; Barton, Keith

    2014-06-10

    To explore changes in iris curvature over a 2-year period. To investigate associations between iris curvature and ocular biometric parameters. To explore relationships between a number of nonocular measurements and ocular biometric parameters. Schoolboys enrolled 2 years previously were invited to return for anterior segment optical coherence tomography, corneal hysteresis (CH), corneal resistance factor (CRF), and axial biometric measurements. Refractive error was assessed and measures of height, weight, waist circumference, digit ratio, and percentage body fat taken. Mean spherical equivalent refraction reduced by 0.76 diopters and mean iris concavity, defined as a measurement of less than or equal to -0.1 mm, increased by 0.018 mm at distance fixation and 0.04 mm on accommodation. Compared with 2 years previously, the prevalence of iris concavity increased from 24% to 32% on distance fixation and from 65% to 84% on accommodation. Variables significantly associated with nonaccommodating iris curvature were anterior chamber depth (ACD, P = 0.029) and mean scleral spur angle (P = 0.0001). Variables significantly associated with accommodating iris curvature were ACD (P = 0.02), lens vault (P = 0.047), and scleral spur angle (P Iris concavity was more prevalent in this cohort of schoolboys than 2 years earlier. The degree of concavity remains related to ACD and lens vault. The association between spur-to-spur distance and CH was similar at baseline and after 2 years. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

  9. Writing argumentative texts: The effects of electronic outlining on students’ writing product and process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2012-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Leijten, M., & Kirschner, P. A. (2012, November). Writing argumentative texts: The effects of electronic outlining on students’ writing product and process. Paper presentation at ICO Fall School 2012, Girona, Spain.

  10. Legal protection against outline operating plans under mining law; Rechtsschutz gegen Rahmenbetriebsplaene im Bergrecht

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, Holger; Mausch, Marlen [Rechtsanwaltskanzlei Noerr LLP, Berlin (Germany)

    2011-03-15

    In the outline planning for a mining project the question of to what extent the interests of potentially affected surface owners must be taken into account at this early stage of project planning regularly arises. In this contribution the authors explain after a brief introduction to the subject the current jurisdiction of the Federal Administrative Court in respect of the corresponding legal requirements on the outline operating plants, the legal effects of the approval of an outline operating plan and the right of the surface owners to contest the operating plan approval. In addition the permissibility of the initial treatment of owner interests in subsequent special operating plans is described. It is evident that the binding effect of the outline operating plans on the one hand and the transfer of owner interests to special operating plans on the other conflict to a certain extent. (orig.)

  11. Gestroomlijnd schrijven: het effect van een elektronische outline-tool op de schrijfvaardigheid

    OpenAIRE

    De Smet, Milou; Brand-Gruwel, Saskia; Broekkamp, Hein; Kirschner, Paul A.

    2011-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Broekkamp, S., & Kirschner, P. A. (2011) Gestroomlijnd schrijven: Het effect van een elektronische outline-tool op de schrijfvaardigheid. Levende Talen Tijdschrift, 12(4), 14-25.

  12. Posterior all-pedicle screw instrumentation combined with multiple chevron and concave rib osteotomies in the treatment of adolescent congenital kyphoscoliosis.

    Science.gov (United States)

    Ayvaz, Mehmet; Olgun, Z Deniz; Demirkiran, H Gokhan; Alanay, Ahmet; Yazici, Muharrem

    2014-01-01

    Congenital kyphoscoliosis is a disorder that often requires surgical treatment. Although many methods of surgical treatment exist, posterior-only vertebral column resection with instrumentation and fusion seem to have become the gold standard for very severe and very rigid curves. Multiple chevron and concave rib osteotomies have been previously reported to be effective in the treatment of neglected severe idiopathic curves. We hypothesized that this method may also be used successfully in the treatment of congenital kyphoscoliosis. To evaluate the effectiveness and safety of multiple chevron osteotomies combined with concave rib osteotomy and posterior pedicle screw instrumentation. Retrospective chart review in the spine service of a large university hospital. Adolescent patients undergoing a specific surgical treatment for the indication of rigid congenital kyphoscoliotic deformity. Radiographic images were used for the measurement of deformity correction. The Turkish version of the Scoliosis Research Society 22 (SRS-22) Patient Questionnaire has been used as a clinical outcome measure in the patient population. A retrospective chart review was performed. Patients admitted to Hacettepe Hospital Spine Center during the period of 2005 to 2009 were included. Criteria for inclusion were as follows: adolescent age group (10-16 years); congenital kyphoscoliosis; formation and/or segmentation defect of at least two vertebral motion segments; surgical treatment of deformity by posterior all-pedicle screw instrumentation, multiple chevron osteotomies, and multiple concave rib osteotomies; follow-up of at least 24 months; and a complete set of preoperative, postoperative, and follow-up standing posteroanterior and lateral full spinal radiographs. The patients' hospital records and X-rays were reviewed. Duration of surgery, intraoperative blood loss, postoperative transfusion requirements, postoperative stay in postanesthesia care unit (PACU), time of hospitalization, and

  13. Body Weight Determination from Foot Outline Length among the Iban Population in Malaysia

    Directory of Open Access Journals (Sweden)

    Hairunnisa Bt Mohd Anas K

    2017-12-01

    Full Text Available Foot impressions form a valuable physical evidence to solve crime. Foot impression measurements provide valuable information in estimating stature, weight, gender and age in crime scene investigation. In Asian countries, many people living in rural places walk without footwear. The aim of this research is to generate regression equations to determine living body weight from foot outline length among the Iban population of Malaysia. The study involved 200 (100 males, 100 females adult Ibans, mostly living in Sarawak, a state in   Malaysia. Following the standard procedure, the foot outlines were collected followed by body weight measurements and were recorded for analysis. The collected data were analysed with PASW 20 computer software. The correlation coefficient (R between the foot outline lengths and body weight was determined for males, females and pooled sample. Based on the foot outline and body weight, 30 regression equations were generated, 10 for males, 10 for females and 10 for pooled samples/unknown gender. The correlation coefficient (R values were positive and statistically significant. It is concluded that the present investigation provided regression equations to determine body weight from foot outline anthropometry. These equations can be used to determine body weight even when partial foot impressions are available at crime scenes.   Keywords: Forensic Science, Body Weight, Foot Outline, Iban Population, Malaysia

  14. Self-reported quality of life and health among Björk-Shiley convexo-concave prosthetic heart valve patients.

    Science.gov (United States)

    Signorello, L B; Kennedy, J A; Richmond, R A; Sieu, K L; Blot, W J; Harrison, D C

    2001-03-01

    The risk of fracture of Björk-Shiley convexo-concave (BSCC) prosthetic heart valves has resulted in consideration of prophylactic explantation and replacement for patients with high-risk valves. Little information exists on perceived quality of life, health status, and serious morbidity among BSCC patients, including those who have undergone explantation. Self-administered questionnaires were completed by a cohort of 585 BSCC patients who participated in an X-ray imaging study to detect precursors to valve fracture up to seven years (average 3.9 years) previously. Responses from 31 explant patients were contrasted with those from 554 BSCC patients in whom explant surgery was not attempted. Perceived quality of life and health status and risk of hospitalization after participating in the imaging study varied considerably among patients, but on average tended not to differ significantly between those with and without explants. A slightly greater proportion of explantees tended to report both improved health status and high rates of heart attack and pacemaker implantation. The health status of these patients was, in general, considerably worse than previously reported among valve implant patients. Over half the cohort were hospitalized during follow up, and half were unable to walk up more than one flight of stairs without shortness of breath. The less than optimal health status of most BSCC patients and relatively high rates of morbidity should be taken into account when considering potential explantation of the valves.

  15. Semi-analytical computation of the acoustic field of a segment of a cylindrically concave transducer in lossless and attenuating media.

    Science.gov (United States)

    Karbeyaz, Başak Ulker; Miller, Eric L; Cleveland, Robin O

    2007-02-01

    Conventional ultrasound transducers used for medical diagnosis generally consist of linearly aligned rectangular apertures with elements that are focused in one plane. While traditional beamforming is easily accomplished with such transducers, the development of quantitative, physics-based imaging methods, such as tomography, requires an accurate, and computationally efficient, model of the field radiated by the transducer. The field can be expressed in terms of the Helmholtz-Kirchhoff integral; however, its direct numerical evaluation is a computationally intensive task. Here, a fast semianalytical method based on Stepanishen's spatial impulse response formulation [J. Acoust. Soc. Am. 49, 1627-1638 (1971)] is developed to compute the acoustic field of a rectangular element of cylindrically concave transducers in a homogeneous medium. The pressure field, for, lossless and attenuating media, is expressed as a superposition of Bessel functions, which can be evaluated rapidly. In particular, the coefficients of the Bessel series are frequency independent and need only be evaluated once for a given transducer. A speed up of two orders of magnitude is obtained compared to an optimized direct numerical integration. The numerical results are compared with Field II and the Fresnel approximation.

  16. Configuration design and accuracy analysis of a novel magneto rheological finishing machine tool for concave surfaces with small radius of curvature

    International Nuclear Information System (INIS)

    Liu, Henan; Chen, Mingjun; Yu, Bo; Zhen, Fang

    2016-01-01

    Magnetorheological finishing (MRF) is a computer-controlled deterministic polishing technique that is widely used in the production of high-quality optics. In order to overcome the defects of existing MRF processes that are unable to achieve concave surfaces with small radius of curvature, a configuration method of a novel structured MRF machine tool using small ball-end permanent-magnet polishing head is proposed in this paper. The preliminary design focuses on the structural configuration of the machine, which includes the machine body, motion units and accessory equipment, and so on. Structural deformation and fabrication accuracy of the machine are analyzed theoretically, in which the reasonable structure sizes, manufacturing errors and assembly errors of main structural components are given for configuration optimization. Based on the theoretical analysis, a four-axes linkage MRF machine tool is developed. Preliminary experiments of spot polishing are carried out and the results indicate that the proposed MRF process can achieve stable polishing area which meets requirement of deterministic polishing. A typical small-bore complex component is polished on the developed device and fine surface quality is obtained with sphericity of the finished spherical surfaces 1.3 μm and surface roughness Ra less than 0.018 μm.

  17. One Health in food safety and security education: Subject matter outline for a curricular framework.

    Science.gov (United States)

    Angelos, John A; Arens, Amanda L; Johnson, Heather A; Cadriel, Jessica L; Osburn, Bennie I

    2017-06-01

    Educating students in the range of subjects encompassing food safety and security as approached from a One Health perspective requires consideration of a variety of different disciplines and the interrelationships among disciplines. The Western Institute for Food Safety and Security developed a subject matter outline to accompany a previously published One Health in food safety and security curricular framework. The subject matter covered in this outline encompasses a variety of topics and disciplines related to food safety and security including effects of food production on the environment. This subject matter outline should help guide curriculum development and education in One Health in food safety and security and provides useful information for educators, researchers, students, and public policy-makers facing the inherent challenges of maintaining and/or developing safe and secure food supplies without destroying Earth's natural resources.

  18. One Health in food safety and security education: Subject matter outline for a curricular framework

    Directory of Open Access Journals (Sweden)

    John A. Angelos

    2017-06-01

    Full Text Available Educating students in the range of subjects encompassing food safety and security as approached from a One Health perspective requires consideration of a variety of different disciplines and the interrelationships among disciplines. The Western Institute for Food Safety and Security developed a subject matter outline to accompany a previously published One Health in food safety and security curricular framework. The subject matter covered in this outline encompasses a variety of topics and disciplines related to food safety and security including effects of food production on the environment. This subject matter outline should help guide curriculum development and education in One Health in food safety and security and provides useful information for educators, researchers, students, and public policy-makers facing the inherent challenges of maintaining and/or developing safe and secure food supplies without destroying Earth's natural resources.

  19. Multi-scale Gaussian representation and outline-learning based cell image segmentation

    Science.gov (United States)

    2013-01-01

    Background High-throughput genome-wide screening to study gene-specific functions, e.g. for drug discovery, demands fast automated image analysis methods to assist in unraveling the full potential of such studies. Image segmentation is typically at the forefront of such analysis as the performance of the subsequent steps, for example, cell classification, cell tracking etc., often relies on the results of segmentation. Methods We present a cell cytoplasm segmentation framework which first separates cell cytoplasm from image background using novel approach of image enhancement and coefficient of variation of multi-scale Gaussian scale-space representation. A novel outline-learning based classification method is developed using regularized logistic regression with embedded feature selection which classifies image pixels as outline/non-outline to give cytoplasm outlines. Refinement of the detected outlines to separate cells from each other is performed in a post-processing step where the nuclei segmentation is used as contextual information. Results and conclusions We evaluate the proposed segmentation methodology using two challenging test cases, presenting images with completely different characteristics, with cells of varying size, shape, texture and degrees of overlap. The feature selection and classification framework for outline detection produces very simple sparse models which use only a small subset of the large, generic feature set, that is, only 7 and 5 features for the two cases. Quantitative comparison of the results for the two test cases against state-of-the-art methods show that our methodology outperforms them with an increase of 4-9% in segmentation accuracy with maximum accuracy of 93%. Finally, the results obtained for diverse datasets demonstrate that our framework not only produces accurate segmentation but also generalizes well to different segmentation tasks. PMID:24267488

  20. Outlining and dictating scientific manuscripts is a useful method for health researchers: A focus group interview.

    Science.gov (United States)

    Andresen, Kristoffer; Laursen, Jannie; Rosenberg, Jacob

    2018-01-01

    Young researchers may experience difficulties when writing scientific articles for publication in biomedical journals. Various methods may facilitate the writing process including outlining the paper before the actual writing and using dictation instead of writing the first draft. The aim of this study was to investigate the experiences and difficulties for young, experienced researchers when writing articles using a detailed outline and dictation of the first draft. We used qualitative focus group interviews and the study was reported according to the COnsolidated criteria for REporting Qualitative research guideline. Participants were sampled from a group of researchers participating in a writing retreat/course. The interviews were recorded on a digital recorder and transcribed. The text was analyzed according to content analysis and coded and condensed into themes and subthemes. Groups of participants were added until data saturation was reached. A total of 14 researchers participated (9 women and 5 men). Their clinical experience was median (range) of 6 (1-11) years since graduation from medical school. Two themes arose during the analyses of the data: "Process guidance with the outline as the map" and "arrival at dictation." The outline was used in the preparation phase leading up to the day of dictation and was used in collaboration with co-authors and supervisors. The participants found it to be a useful tool for preparing the manuscript and dictating their initial first full draft. Experienced young researchers found beneficial effects of using a structured outline to prepare for dictation of scientific articles. The outline was a tool that would develop in close collaboration with co-authors and mentors. With dictation, a full first draft of a manuscript can be produced in a few hours. Participants positively evaluated this structured and reproducible way of producing scientific articles.

  1. Reconstruction of Building Outlines in Dense Urban Areas Based on LIDAR Data and Address Points

    Science.gov (United States)

    Jarzabek-Rychard, M.

    2012-07-01

    The paper presents a comprehensive method for automated extraction and delineation of building outlines in densely built-up areas. A novel approach to outline reconstruction is the use of geocoded building address points. They give information about building location thus highly reduce task complexity. Reconstruction process is executed on 3D point clouds acquired by airborne laser scanner. The method consists of three steps: building detection, delineation and contours refinement. The algorithm is tested against a data set that presents the old market town and its surroundings. The results are discussed and evaluated by comparison to reference cadastral data.

  2. Hinkley Point 'C' power station public inquiry: outline statement of case

    International Nuclear Information System (INIS)

    1988-05-01

    This outline statement relates to the public inquiry to be held into the planning application by the Central Electricity Generating Board (CEGB) to construct a 1200 MW Pressurized Water Reactor (PWR) power station at Hinkley Point (Hinkley Point ''C'') in the United Kingdom, adjacent to an existing nuclear power station. The inquiry will consider economic, safety, environmental and planning matters relevant to the application and the implications for agriculture and local amenities of the re-aligning of two 400 kV overhead transmission lines. The outline statement contains submissions on: policy contest and approach; the requirement for Hinkley Point ''C''; design and safety; local issues. (UK)

  3. Writing argumentative texts: The effects of electronic outlining on students’ writing product and process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2012-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Leijten, M., & Kirschner, P. A. (2012, July). Writing argumentative texts: The effects of electronic outlining on students’ writing product and process. Paper presented at the meeting of EARLI SIG Writing, Porto, Portugal.

  4. OUTLINE FOR OCCUPATIONAL HOME ECONOMICS COURSE IN COMMERCIAL AND INSTITUTIONAL FOOD PREPARATION.

    Science.gov (United States)

    Alabama State Dept. of Education, Montgomery. Home Economics Service.

    THE EXPERIMENTAL OUTLINE IS FOR TEACHER USE IN PLANNING A TWO-SEMESTER COURSE TO PREPARE 11TH AND 12TH GRADE STUDENTS FOR ENTRY LEVEL COMMERCIAL FOOD PREPARATION JOBS SUCH AS FOOD SERVICE WORKERS, COOK HELPERS, CATERER HELPERS, SALAD MAKERS, BAKER HELPERS, SHORT ORDER COOKS, AND TRAY LINE WORKERS. IT WAS DEVELOPED BY VOCATIONAL HOME ECONOMICS…

  5. Auto Body Welding 2 (Course Outline), Automotive Body Repair and Refinishing 1: 9033.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The 90-hour course is a foundation quinmester course in welding for the auto body repairman. The outline consists of seven blocks of instruction (orientation, 6 hours; auto body oxyacetylene welding, 10 hours; electric arc welding equipment, 6 hours; auto body electric arc welding, 8 hours; position welding, 40 hours; electric spot welders, 16…

  6. Outline of the Therapeutic Process in Social Skills Training with Socially Dysfunctional Patients.

    Science.gov (United States)

    Stravynski, Ariel; And Others

    1987-01-01

    Outlines the therapeutic process in social skills training with 22 socially dysfunctional outpatients who met Diagnostic and Statistical Manual of Mental Disorders criteria for avoidant personality disorder. Measured performance of prosocial target behaviors and associated subjective anxiety during baseline, treatment, and follow-up periods.…

  7. How to Teach Chess in the Public Schools: A Course Outline.

    Science.gov (United States)

    Schmidt, Bernard

    Educational objectives and course outlines for beginning, intermediate, and advanced chess instruction in elementary and secondary schools are provided. Objectives are that students will develop analytical, synthetic, and decision-making skills, learn to engage in thorough chess research that will enhance their ability to do any research, and gain…

  8. Long-Range Goals in International Telecommunications and Information: An Outline for United States Policy.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Commerce, Science, and Transportation.

    This report presents a comprehensive delineation of the principal issues in the field of international telecommunications and information, as well as an overview of United States policy in this area. The first part discusses international trends in protectionism and the politicization of international forums; it also outlines United States goals,…

  9. Identification of everyday objects on the basis of Gaborized outline versions.

    Science.gov (United States)

    Sassi, Michaël; Vancleef, Kathleen; Machilsen, Bart; Panis, Sven; Wagemans, Johan

    2010-01-01

    Using outlines derived from a widely used set of line drawings, we created stimuli geared towards the investigation of contour integration and texture segmentation using shapes of everyday objects. Each stimulus consisted of Gabor elements positioned and oriented curvilinearly along the outline of an object, embedded within a larger Gabor array of homogeneous density. We created six versions of the resulting Gaborized outline stimuli by varying the orientations of elements inside and outside the outline. Data from two experiments, in which participants attempted to identify the objects in the stimuli, provide norms for identifiability and name agreement, and show differences in identifiability between stimulus versions. While there was substantial variability between the individual objects in our stimulus set, further analyses suggest a number of stimulus properties which are generally predictive of identification performance. The stimuli and the accompanying normative data, both available on our website (http://www.gestaltrevision.be/sources/gaboroutlines), provide a useful tool to further investigate contour integration and texture segmentation in both normal and clinical populations, especially when top-down influences on these processes, such as the role of prior knowledge of familiar objects, are of main interest.

  10. Assessing the Effectiveness of Student Oriented Learning Outlines (SOLOs) in an Equine Classroom

    Science.gov (United States)

    Jogan, Kathleen S.

    2014-01-01

    This study determined if the use of the student oriented learning outline (SOLO) in a University of Arkansas equine production classroom had a positive influence in three areas: mastery of material taught, retention of material taught and voluntary positive student behaviors related to the use of course material. Thirty-one students who were…

  11. How the Chemistry Modeling Curriculum Engages Students in Seven Science Practices Outlined by the College Board

    Science.gov (United States)

    Posthuma-Adams, Erica

    2014-01-01

    As advanced placement (AP) teachers strive to implement the changes outlined in the AP chemistry redesign, they will have the opportunity to reflect on and evaluate their current practices. For many AP teachers, the new focus on conceptual understanding, reasoning, inquiry, and critical thinking over memorization and algorithmic problem solving…

  12. Automotive Mechanics Curriculum Outline for Secondary Schools. Vocational Education Curriculum Guide.

    Science.gov (United States)

    Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

    This curriculum outline for secondary automotive mechanics is structured around Louisiana's Vocational-Technical Automotive Mechanics Curriculum. The curriculum is composed of 16 units of instruction, covering the following topics: benchwork, fundamentals of automotive engines, preventive maintenance, automotive brakes, steering and front…

  13. Food Services and Hospitality for 10th, 11th, and 12th Grades. Course Outline.

    Science.gov (United States)

    Bucks County Technical School, Fairless Hills, PA.

    The outline describes the food services and hospitality course offered to senior high school students at the Bucks County Technical School. Specifically, the course seeks to provide students with a workable knowledge of food services and foster in them a sense of personal pride for quality workmanship. In addition to a statement of the philosophy…

  14. Aircraft Fuel, Hydraulic and Pneumatic Systems (Course Outlines), Aviation Mechanics 3 (Air Frame): 9067.01.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This document presents an outline for a 135-hour course designed to familiarize the student with the operation, inspection, and repair of aircraft fuel, hydraulic, and pneumatic systems. It is designed to help the trainee master the knowledge and skills necessary to become an aviation airframe mechanic. The aviation airframe maintenance technician…

  15. Electronic outlining as a writing strategy: Effects on students' writing products, mental effort and writing process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2018-01-01

    This study addresses to what extent and how electronic outlining enhances students' writing performance. To this end, the focus of this study is not only on students' final writing products but also on the organisation of the writing process (i.e., planning, translating, and reviewing) and perceived

  16. An Outline on Psychotropic Drug Use in the Developmentally Disabled Patient. Monograph #102.

    Science.gov (United States)

    Vander Zanden, Jeanne A.

    This introduction to basic principles of psychotropic drug use in developmentally disabled patients is intended to provide personnel working in the field with information on appropriate clinical use as well as potential risks. Presented in outline form, information is provided on five classes of psychotropic drugs: antipsychotics; antidepressants;…

  17. Improved assessment of multiple sclerosis lesion segmentation agreement via detection and outline error estimates

    Directory of Open Access Journals (Sweden)

    Wack David S

    2012-07-01

    Full Text Available Abstract Background Presented is the method “Detection and Outline Error Estimates” (DOEE for assessing rater agreement in the delineation of multiple sclerosis (MS lesions. The DOEE method divides operator or rater assessment into two parts: 1 Detection Error (DE -- rater agreement in detecting the same regions to mark, and 2 Outline Error (OE -- agreement of the raters in outlining of the same lesion. Methods DE, OE and Similarity Index (SI values were calculated for two raters tested on a set of 17 fluid-attenuated inversion-recovery (FLAIR images of patients with MS. DE, OE, and SI values were tested for dependence with mean total area (MTA of the raters' Region of Interests (ROIs. Results When correlated with MTA, neither DE (ρ = .056, p=.83 nor the ratio of OE to MTA (ρ = .23, p=.37, referred to as Outline Error Rate (OER, exhibited significant correlation. In contrast, SI is found to be strongly correlated with MTA (ρ = .75, p  Conclusions The DE and OER indices are proposed as a better method than SI for comparing rater agreement of ROIs, which also provide specific information for raters to improve their agreement.

  18. Resonant Circuits and Introduction to Vacuum Tubes, Industrial Electronics 2: 9325.03. Course Outline.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The 135 clock-hour course for the 11th year consists of outlines for blocks of instruction on series resonant circuits, parallel resonant circuits, transformer theory and application, vacuum tube fundamentals, diode vacuum tubes, triode tube construction and parameters, vacuum tube tetrodes and pentodes, beam-power and multisection tubes, and…

  19. An outline of military technological dynamics as restraints for acquisition, international cooperation and domestic technological development

    Directory of Open Access Journals (Sweden)

    Édison Renato Silva

    2014-12-01

    Full Text Available The expectation that technological returns from defense expenditure through acquisition, international cooperation and domestic research would further national development underappreciates the different technological dynamic of the armed services. This paper outlines the technological dynamic the stems from fighting in the air, at sea and on land, exemplifying consequences for the case of acquisition.

  20. Curriculum Outline for Introduction to Engineering Chemistry. First Edition. Review Cycle-Annual.

    Science.gov (United States)

    Schlenker, Richard M.

    This curriculum outline consists of behavioral objectives (called terminal and enabling objectives) for Introduction to Engineering Chemistry, a one-semester, post-secondary course consisting of four 1-hour lectures each week. Course goal is to introduce marine engineering students to the rudiments of basic/introductory inorganic chemistry. The…

  1. Natural Gas Compression Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 5311.1

    Science.gov (United States)

    Alberta Advanced Education and Technology, 2011

    2011-01-01

    The graduate of the Natural Gas Compression Technician apprenticeship program is a certified journeyperson who will be able to install, commission, maintain and repair equipment used to gather store and transmit natural gas. Advanced Education and Technology has prepared this course outline in partnership with the Natural Gas Compression…

  2. An outline of the bibliometric indicator used for performancebased funding of research institutions in Norway

    DEFF Research Database (Denmark)

    Schneider, Jesper Wiborg

    2009-01-01

    This article outlines and discusses the bibliometric indicator used for performance-based funding of research institutions in Norway. It is argued that the indicator is novel and innovative as compared to the indicators used in other funding models. It compares institutions based on all...

  3. Discussion and Outline of a Course on Methods of Teaching a Foreign Language.

    Science.gov (United States)

    Heiser, Mary

    This course, designed for instructing potential teaching assistants to teach college students a foreign language, concentrates on six major areas of preparation. A detailed outline covers: (1) course introduction and definitions, (2) applied linguistics, (3) approaches and methods, (4) testing, (5) classroom techniques, and (6) demonstrations.…

  4. Outline of the Fukushima Daiichi Accident. Lessons Learned and Safety Enhancements

    Directory of Open Access Journals (Sweden)

    Hirano Masashi

    2017-01-01

    This paper briefly presents the outline of the Fukushima Daiichi accident and summarizes the major lessons learned having been drawn and safety enhancements having been done in Japan for the purpose of giving inputs to the discussions to be taken place in the Special Invited Session “Fukushima, 5 years after”.

  5. Peculiarities of dynamic evaluation of globular formation outlines of the lungs with multislice computed tomography

    Directory of Open Access Journals (Sweden)

    Vladimir G. Kolmogorov

    2017-01-01

    Full Text Available Background. Visualization of infiltration in lung tissue surrounding the globular formation of the lungs (GFL determined by X-ray is one of the important points in the differential diagnosis of primary lung cancer, specific and non-specific inflammatory processes. At CT gauge body phantoms test facilities are widely used for evaluating the performance of scanners that allow the evaluation of scanner characteristics : noise, contrast sensitivity, positioning accuracy, stiffness of the radiation beam, the layer thickness, spatial resolution, etc.Aim. To develop a methodology for assessing the GFL outlines of the dynamics of multislice computed tomography (MSCT by selecting the optimal image processing algorithms.Materials and methods. The visual analysis of two- component physical model images of the electronic window level (WL and electronic window width (WW was installed on the basis of the best conditions for studying a specific group of tissues. In the case of indistinct, poorly defined outlines of globular formations, visual assessment is operator-dependent and requires development and application of quantitative methods of analysis. For a quantitative description of the outlines of the image of the GFL model, a vector in a polar coordinate system coming from the center of the figure mass bounded by the outline was used. The following outline complexity measures were adopted: modified Shannon information entropy H(S(k for k harmonics of the normalized spectral power density S(k of the length of oscillation of loop radius vector R(n; the number of local maxima L of signature radius vector R(n; the maximum value of the normalized power spectral density S(k; product (multiplicity of the entropy H(S and the number of local maxima L.Results. “Multiplicity”, “the number of local maxima” of the outline depend on the GFL geometric dimensions and cannot be used for diagnosis without first normalizing for GFL outline length. The parameters

  6. Strut fracture with Björk-Shiley 70 degrees convexo-concave valve. An international multi-institutional follow-up study.

    Science.gov (United States)

    Ericsson, A; Lindblom, D; Semb, G; Huysmans, H A; Thulin, L I; Scully, H E; Bennett, J G; Ostermeyer, J; Grunkemeier, G L

    1992-01-01

    Between 1980 and 1983, 831 Björk-Shiley 70 degrees convexo-concave prosthetic heart valves were implanted at five institutions in Sweden, Germany. The Netherlands, and Canada. As of January 1991, there were 34 outlet strut fractures occurring from 0.2 to 10.1 years (median = 4.6 years) after implantation. In addition, there were 28 sudden, unexplained deaths. The mortality after strut fracture was 84%. The mortality after emergency valve replacement for strut fracture was 50%. The 10-year actuarial fracture rate (standard error) was 10.5 (2.4)% for large (29-33 mm) valves vs. 3.3 (1.2)% for 21-27 mm valves (P less than 0.001). Within valve size groups, fracture rates for aortic and mitral valves were similar. Cox regression analysis found only valve size to be significantly associated with strut fracture. There is a further subgrouping of the valves according to the manufacturer: group I are the earlier large 29-33 mm) valves; group II are the later large valves; group III are the small size (21-27 mm) valves. The risk of strut fracture was highest in group I (12.3% at 10 years) with an approximatively constant hazard (1.4% per year). A comparison was made with a statistical model incorporating all cases reported to the manufacturer. This model estimates fracture rates approximately 63%-73% of those found in the present study. These findings lead us to recommend that group I patients should be considered for elective reoperation on an individual basis, giving careful attention to risk factors and contraindications.

  7. [Directions for reoperation of patients with Björk-Shiley convexo-concave valve prosthesis, based on long-term experience].

    Science.gov (United States)

    Yamaki, F; Nakano, K; Endo, M; Hashimoto, A; Koyanagi, H

    1994-02-01

    Although a high incidence of strut fracture of the Björk-Shiley convexo-concave (C-C) valve prosthesis has been reported, it is still controversial whether the prosthesis functioning normally should be replaced electively. To clarify our policy for this issue, we reviewed 28 patients who had undergone mitral valve replacement with a C-C valve prosthesis, and evaluated long-term results according to STS guidelines. The incidence of valve-related complications expressed as % patient-year were; structural deterioration 0.30, nonstructural dysfunction 0.30, thromboembolism 1.20. There were no thrombosed valves, anticoagulant-related hemorrhage or prosthetic valve endocarditis. The actuarial free rate after valve replacement with the C-C at 10 years, constructed by the Kaplan-Meier method, were compared with those with St. Jude Medical (SJM) valve prosthesis. (1) Actuarial survival: 77.9 vs 87.3 (NS), (2) Reoperation-free: 91.6 vs 98.0 (p valve-related complications: 71.2 vs 77.7 (NS). The long-term results with the C-C were compatible to those with a SJM valve prosthesis. However, if a strut fracture occurs, it is very difficult to save the patient's life. The hospital mortality of re-replacement of valve prosthesis during the last 10 years, at our institute, was 2.6%, which is almost equal to the cumulative risk of strut fracture of the C-C valve after 10 years (3.0%).(ABSTRACT TRUNCATED AT 250 WORDS)

  8. Shaping Segregation: Convexity vs. concavity

    NARCIS (Netherlands)

    Gonzalez Briones, Sebastián; Windows-Yule, Kit; Luding, Stefan; Parker, D.J.; Thornton, Anthony Richard

    2014-01-01

    Controlling segregation is both a practical and a theoretical challenge. In this Letter we demonstrate a manner in which rotation-induced segregation may be controlled by altering the geometry of the rotating containers in which granular systems are housed. Using a novel drum design comprising

  9. Cultural Landscapes and Neolithisation Processes: Outline of a model for the Scheldt basin (Belgium

    Directory of Open Access Journals (Sweden)

    Erick N. Robinson

    2007-12-01

    Full Text Available Recent research has indicated the continuation of a hunting-fishing-gathering way of life in the lower Scheldt basin (Belgium for over a millennium after the first arrival of agriculture in the middle Scheldt. Current evidence suggests multiple hiatuses in cultural change from the late 6th-late 5th millennium BC. This article provides the outline of a model that seeks to explain these hiatuses from the perspective of indigenous hunter-fisher-gatherer cultural landscapes. The outline investigates the significance of palaeoecological and social contexts in relation to contact and cultural transmission processes during the transition to agriculture. Recent ethnoarchaeological research from hunter-fisher-gatherers in temperate and boreal environments is referenced as a structural analogy for illuminating the important relationship between territoriality and social mediation within hunter-gatherer groups at the Mesolithic-Neolithic interface.

  10. Reliability and safety program plan outline for the operational phase of a waste isolation facility

    International Nuclear Information System (INIS)

    Ammer, H.G.; Wood, D.E.

    1977-01-01

    A Reliability and Safety Program plan outline has been prepared for the operational phase of a Waste Isolation Facility. The program includes major functions of risk assessment, technical support activities, quality assurance, operational safety, configuration monitoring, reliability analysis and support and coordination meetings. Detailed activity or task descriptions are included for each function. Activities are time-phased and presented in the PERT format for scheduling and interactions. Task descriptions include manloading, travel, and computer time estimates to provide data for future costing. The program outlined here will be used to provide guidance from a reliability and safety standpoint to design, procurement, construction, and operation of repositories for nuclear waste. These repositories are to be constructed under the National Waste Terminal Storage program under the direction of the Office of Waste Isolation, Union Carbide Corp. Nuclear Division

  11. Future biogas plants. New plant outlines and economic potential; Fremtidens biogasfaellesanlaeg. Nye anlaegskoncepter og oekonomisk potentiale

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Johannes (ed.)

    2006-06-16

    The Working Paper is the first joint reporting from a project aiming at identifying new outlines for joint biogas plants with profitable operation mainly based on slurry. So far a pre-requisition for profitable operation has been supply of 20-25% organic waste as supplement to the slurry, partly because organic waste increases gas production, and partly to collect recipient fee. The new outlines, which are analysed, represent different combinations of technology for separation, pre-treatment and re-circulation, including separation at each separate farm and separation of degassed slurry. Simultaneously with an increased gas yield, a number of synergy effects are achieved, which can contribute to ensure an environmentally friendly distribution and use of the nutrients, especially in areas with large concentrations of animal husbandry. (BA)

  12. Effective basis for modelling outlines of envelopes generated by motion of surfaces of revolution

    International Nuclear Information System (INIS)

    Turlapov, V.E.; Yakunin, V.I.

    1994-01-01

    This paper considers effective solutions of problems on parallel processing of envelopes generated by three-dimensional movement of surfaces of revolution. In general, determining the points outlining the envelope corresponding to concrete values for motion parameters reduces to numerical solution of nonlinear equations in generatrix parameters. For surfaces of revolution whose generatrix is a circular arc, this problem reduces to solution of a fourth-degree algebraic equation. It is shown that an envelope outline can be specified in the form of an explicit function of the motion parameters for any motion if the generatrix of the surface of revolution is a strait line, and, for motion with a fixed point or a fixed axis for the surface of revolution, if the generatrix is a conic section, spline, or a number of other curves

  13. Outline of examination guides of water-cooled research reactors in Japan

    International Nuclear Information System (INIS)

    Yoshino, F.; Kimura, R.

    1992-01-01

    The Nuclear Safety Commission of Japan published two examination guides of water-cooled research reactors on July 18, 1991; one is for safety design, and another is for safety evaluation. In these guides, careful consideration is taken into account on the basic safety characteristic features of research reactors in order to be reasonable regulative requirements. This paper describes the fundamental philosophy and outline of the guides. (author)

  14. Automatic detection of outlines. Application to the quantitative analysis of renal scintiscanning pictures

    International Nuclear Information System (INIS)

    Morcos-Ghrab, Nadia.

    1979-01-01

    The purpose of the work described is the finalizing of a method making it possible automatically to extract the significant outlines on a renal scintiscanning picture. The algorithms must be simple and of high performance, their routine execution on a mini-computer must be fast enough to compete effectively with human performances. However, the method that has been developed is general enough to be adapted, with slight modifications, to another type of picture. The first chapter is a brief introduction to the principle of scintiscanning, the equipment used and the type of picture obtained therefrom. In the second chapter the various approaches used for form recognition and scene analysis are very briefly described with the help of examples. The third chapter deals with pretreatment techniques (particularly the machine operators) used for segmenting the pictures. Chapter four presents techniques which segment the picture by parallel processing of all its points. In chapter five a description is given of the sequential research techniques of the outline elements, drawing inspiration from the methods used in artificial intelligence for resolving the optimization problem. The sixth chapter shows the difficulties encountered in extracting the renal outlines and the planning technique stages adopted to overcome these difficulties. Chapter seven describes in detail the two research methods employed for generating the plan. In chapter eight, the methods used for extending the areas obtained on the plan and for refining the outlines that bound them are dealt with. Chapter nine is a short presentation of the organization of the programmes and of their data structure. Finally, examples of results are given in chapter ten [fr

  15. Latin American Bioethics: intangible outline of the continent’s reality

    Directory of Open Access Journals (Sweden)

    Dora Porto

    2016-10-01

    Full Text Available This brief essay proposes to reflect on what could be Latin American bioethics, speculating about possible identity characteristics and operational limits of the idea of what constitutes Latin America, outlined conceptually by geographical, historical and cultural aspects. This attempt does not assume the task of defining exactly or definitively what Latin American bioethics is, but rather limits itself to the purpose of causing controversy in order to stimulate reflection on this topic to assess its usefulness.

  16. Preliminary outline for the final report of INFCE working group 2

    International Nuclear Information System (INIS)

    1979-04-01

    After proposing a revised and detailed outline for the working group report, a draft of chapter 6, assessment and comparison of the proliferation aspects of enrichment, is given. Major subheadings within the chapter include: proliferation aspects in general, proliferation aspects of enrichment, means to minimize the risks of proliferation of enrichment technologies, international safeguards aspects specific to enrichment, international aspects, including multi-national or regional fuel cycle centers, special features to proliferation resistance at enrichment techniques, and general conclusions

  17. Outline of an experimental apparatus for the study on the advanced voloxidation process

    International Nuclear Information System (INIS)

    Uchiyama, Gunzo; Sugikawa, Susumu; Maeda, Mitsuru; Tsujino, Takeshi; Torikai, Seishi; Kitamura, Masafumi; Yamazaki, Kazunobu.

    1990-02-01

    The experimental apparatus (VULCAN, the capacity; 2 kg-UO 2 /batch) was constructed to study on the advanced voloxidation process, which was proposed to reduce amount of tritium released from fuel reprocessing facilities. Using this equipment, a process study was conducted on behaviors of oxidation-reduction of simulated fuels and of release of tritium, and on confinement function of rotary seal of the reactor. An outline of the experimental apparatus is described. (author)

  18. Recent progress and focuses of ichnology: Outline of the 14th International Ichnofabric Workshop

    OpenAIRE

    Ruo-Ying Fan; Yi-Ming Gong

    2017-01-01

    The 14th International Ichnofabric Workshop was held successfully in Taipei, China from April 29th to May 2nd. From the oral presentations, posters, intra- and post-workshop field trips, and workshop discussions, a few promising aspects of ichnological study can be outlined: (1) Ichnotaxonomy is, and will be the major endeavour of ichnologists, supplying important behavioural information for palaeontological studies, and also providing reasonable, objective, and convenient taxonomical framewo...

  19. Historical glacier outlines from digitized topographic maps of the Swiss Alps

    Science.gov (United States)

    Freudiger, Daphné; Mennekes, David; Seibert, Jan; Weiler, Markus

    2018-04-01

    Since the end of the Little Ice Age around 1850, the total glacier area of the central European Alps has considerably decreased. In order to understand the changes in glacier coverage at various scales and to model past and future streamflow accurately, long-term and large-scale datasets of glacier outlines are needed. To fill the gap between the morphologically reconstructed glacier outlines from the moraine extent corresponding to the time period around 1850 and the first complete dataset of glacier areas in the Swiss Alps from aerial photographs in 1973, glacier areas from 80 sheets of a historical topographic map (the Siegfried map) were manually digitized for the publication years 1878-1918 (further called first period, with most sheets being published around 1900) and 1917-1944 (further called second period, with most sheets being published around 1935). The accuracy of the digitized glacier areas was then assessed through a two-step validation process: the data were (1) visually and (2) quantitatively compared to glacier area datasets of the years 1850, 1973, 2003, and 2010, which were derived from different sources, at the large scale, basin scale, and locally. The validation showed that at least 70 % of the digitized glaciers were comparable to the outlines from the other datasets and were therefore plausible. Furthermore, the inaccuracy of the manual digitization was found to be less than 5 %. The presented datasets of glacier outlines for the first and second periods are a valuable source of information for long-term glacier mass balance or hydrological modelling in glacierized basins. The uncertainty of the historical topographic maps should be considered during the interpretation of the results. The datasets can be downloaded from the FreiDok plus data repository (https://freidok.uni-freiburg.de/data/15008" target="_blank">https://freidok.uni-freiburg.de/data/15008, https://doi.org/10.6094/UNIFR/15008" target="_blank">https://doi.org/10.6094/UNIFR

  20. Outlining precision boundaries among areas with different variability standards using magnetic susceptibility and geomorphic surfaces

    OpenAIRE

    Matias,Sammy S. R.; Marques Júnior,José; Siqueira,Diego S.; Pereira,Gener T.

    2014-01-01

    There is an increasing demand for detailed maps that represent in a simplified way the knowledge of the variability of a particular area or region maps. The objective was to outline precision boundaries among areas with different accuracy variability standards using magnetic susceptibility and geomorphic surfaces. The study was conducted in an area of 110 ha, which identified three compartment landscapes based on the geomorphic surfaces model. To determinate pH, organic matter, phosphorus, po...

  1. Outline of the seismic design guideline of an FBR - a tentative draft

    International Nuclear Information System (INIS)

    Akiyama, Hiroshi; Ohtsubo, Hideomi; Nakamura, Hideharu; Matsuura, Shinichi; Hagiwara, Yutaka; Yuhara, Tetsuo; Hirayama, Hiroshi; Kokubo, Kunio; Ooka, Yuji.

    1993-01-01

    Central Research Institute of Electric Power Industry (Japan) is carrying out the Demonstration Test and Research Program of Buckling of FBR (FY 1987-FY 1993). The first half of the research program was finished after establishing a seismic buckling design guideline (a tentative draft). The purpose of this paper is to describe the dynamic buckling characteristics of FBR main vessels and the outline of the rationalized buckling design guideline for seismic loadings. (orig.)

  2. DORT and TORT workshop -- Outline for presentation for performance issues for large problems

    International Nuclear Information System (INIS)

    Barnett, A.

    1998-04-01

    This paper addresses the problem of running large TORT programs. The problem being a limited amount of time per job and limited amount of memory and disk space. The solution that the author outlines here is to break up the TORT run in time and space. For the time problem run multiple, sequential, dependent jobs. For the space problem use TORT internal memory conservation features. TORT is a three-dimensional discrete ordinates neutron/photon transport code

  3. A communication tool for cancer patients with pain: the art therapy technique of the body outline.

    Science.gov (United States)

    Luzzatto, Paola; Sereno, Valerie; Capps, Roy

    2003-06-01

    The multidimensional aspect of pain suggests the use of multimodal interventions. The Memorial Sloan-Kettering Cancer Center has recently utilized the art therapy modality to help patients communicate the painful side of their illness in such a way that they can feel understood and respected. In this paper we describe a simple innovative art therapy intervention that we have developed within the Art Therapy Service in the Psychiatric Department of Memorial Sloan-Kettering Cancer Center. The patients work with a Body Outline as a starting template, together with the art therapist, in sessions lasting approximately 45 minutes. They are encouraged to fill the space inside and outside the Body Outline. They can use colored pastels, markers, or watercolor or cut out images for a collage. Seventy hospitalized adult cancer patients, 60 women and 10 men, used this intervention between January 1999 and May 2000. We have analyzed the variety of responses from the 70 patients, and three main groups have emerged, which have focused on the following issues: (1) visualization of physical pain, (2) communication of emotions, and (3) search for meaning/spirituality. The results suggest that because of its abstract symbolic feature, the Body Outline is a very flexible therapeutic intervention. It must be offered within the relationship with the art therapist, and it may fulfill quite a variety of expressive needs, from the description of physical pain to the elaboration of spiritual longings.

  4. Annotated outline for the SCP conceptual design report: Office of Geologic Repositories

    International Nuclear Information System (INIS)

    1987-06-01

    The Nuclear Waste Policy Act of 1982 (NWPA) requires that site characterization plans (SCPs) be submitted to the Nuclear Regulatory Commission (NRC), affected States and Indian tribes, and the general public for review and comment prior to the sinking of shafts at a candidate repository site. The SCP is also required by the NRC licensing procedures for the disposal of high-level waste. An Annotated Outline (AO) for Site Characterization Plans (OGR/B-5) has been prepared to provide DOE's standard format and guidance for preparation of SCPs. Consistent with the AO for SCPs. Chapter 6 of the SCP is to provide the requirements and references the media-specific design data base, describe the current design concepts, and discuss design information needs. In order to develop this design information, the Office of Geologic Repositories program is planning a SCP conceptual design phase as part of the overall repository design process. This phase is the first step in the design process, and the result and design can be expected to change as the program moves through the site characterization phase. The Annotated Outline which follows provides the standard format and guidance for the preparation of the SCP Conceptual Design Reports. It is considered to meet the intent of NRC's proposed Generic Technical Position philosophy contained therein. The SCP Conceptual Design Report will be the primary basis for preparation of Chapter 6 of the SCP and will be stand-alone reference document for the SCP. Appendix 1 to this Annotated Outline provides a correlation between Chapter 6 of the SCP and SCP Conceptual Design Report for the information purposes

  5. Student-oriented learning outlines: a valuable supplement to traditional instruction.

    Science.gov (United States)

    VanArsdale, S K; Hammons, J O

    1998-01-01

    In a time of changing health care and funding restraints in institutions, continuing education and staff development departments are being challenged to produce better prepared nurses at reduced costs per employee. Improvements in how nurses are prepared are needed to ensure higher levels of competence without increasing the cost. This article describes the development and use of a practical strategy for mastery learning known as Student-Oriented Learning Outlines or SOLOs. This approach has been found to be effective in producing improvements in learning and ultimately patient care while reducing cost to the institution.

  6. Description of the power plant model BWR-plasim outlined for the Barsebaeck 2 plant

    International Nuclear Information System (INIS)

    Christensen, P. la Cour.

    1979-08-01

    A description is given of a BWR power plant model outlined for the Barsebaeck 2 plant with data placed at our disposal by the Swedish Power Company Sydkraft A/B. The basic operations are derived and simplifications discussed. The model is implemented with a simulation system DYSYS which assures reliable solutions and easy programming. Emphasis has been placed on the models versatility and flexibility so new features are easy to incorporate. The model may be used for transient calculations for both normal plant conditions and for abnormal occurences as well as for control system studies. (author)

  7. Outline of safety regulations and administrations for commercial nuclear power plants in Japan

    International Nuclear Information System (INIS)

    Kinichi Yamamoto

    1987-01-01

    Outline of safety regulations and administrations for the commercial nuclear power plants in Japan is briefly described. The strict measures for safety assurance are always taken based on the principle of defense-indepth. In the actual procedures of regulatory control, the examinations and inspections shall be performed at each individual step in the stage of applications, and also in the stage of constructions. Thus, those regulatory examinations and inspections shall be performed in detail and carefully, and at the most suitable time; resulting in an effective regulatory control by the Ministry of International Trade and Industry. (author)

  8. AN OUTLINE OF THE EUROPE – SOUTH AFRICA RELATIONS DURING AND POST THE APARTHEID ERA

    Directory of Open Access Journals (Sweden)

    Konstantinos Margaritis

    2012-12-01

    Full Text Available South Africa was always a main interest region for European countries. The United Kingdom, the Netherlands, France and many others at lesser extent, tried to establish control over thecountry due to its special geographical position. On the other hand, since 1948, South Africa had been characterized by a tremendous regime, the so-called apartheid. The idea of this paper is to clarify the position of certain European countries towards South Africa during this severe period for the latest and to outline the major development agreements between the EC/EU and South Africa after the fall of apartheid, since South Africa is an important trade partner for the Union.

  9. Outline of the safety research results, in the power reactor field, fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Power Reactor and Nuclear Fuel Development Corporation (PNC) has promoted the safety research in fiscal year of 1996 according to the Fundamental Research on Safety Research (fiscal year 1996 to 2000) prepared on March, 1996. Here is described on the research results in fiscal year 1996, the first year of the 5 years programme, and whole outline of the fundamental research on safety research, on the power reactor field (whole problems on the new nuclear converter and the fast breeder reactor field and problems relating to the power reactor in the safety for earthquake and probability theoretical safety evaluation field). (G.K.)

  10. Lecture in Honour of Leopold Infeld (Extended Outline Only) Spinors in General Relativity

    International Nuclear Information System (INIS)

    Penrose, R. sir

    1999-01-01

    This article is an extended outline of the lecture delivered at the Infeld Centennial Meeting. In the lecture a review was given of the development of the theory of spinors and related objects in special and general relativity, with some emphasis on the twistor theory and its applications. The lecture was not intended as a detailed account of the subject, but it rather was a series of comments on the relevance of various spinor-type objects and their relation to some features of space-time structure. The present article is also a guide, with its author's personal preferences, to the extensive bibliography of the subject. (author)

  11. ITER-FEAT - outline design report. Report by the ITER Director. ITER meeting, Tokyo, January 2000

    International Nuclear Information System (INIS)

    2001-01-01

    It is now possible to define the key elements of ITER-FEAT. This report provides the results, to date, of the joint work of the Special Working Group in the form of an Outline Design Report on the ITER-FEAT design which, subject to the views of ITER Council and of the Parties, will be the focus of further detailed design work and analysis in order to provide to the Parties a complete and fully integrated engineering design within the framework of the ITER EDA extension

  12. Outline of preparation construction of Shimane Nuclear Power Station No.3

    International Nuclear Information System (INIS)

    Oda, Yasuhiro; Sasaki, Yutaka; Matsukage, Shigeo; Kawahara, Kazufumi

    2004-01-01

    The preparation construction of Shimane Nuclear Power Station No.3 (No.3) started on 15th March in 2004. The main preparation construction consist of the site preparation, revetment works, breakwater works, production of blocks, flood-way and outlet works. The outline of the project is described by the time schedule of work, the cross section of site preparation, site, the revetment method used, the cross section of representative breakwater, structure style and improvement works of flood-way and outlet and content of each works. (S.Y.)

  13. Commercialization of biomass energy projects: Outline for maximizing use of valuable tax credits and incentives

    International Nuclear Information System (INIS)

    Sanderson, G.A.

    1994-01-01

    The Federal Government offers a number of incentives designed specifically to promote biomass energy. These incentives include various tax credits, deductions and exemptions, as well as direct subsidy payments and grants. Additionally, equipment manufacturers and project developers may find several other tax provisions useful, including tax incentives for exporting U.S. good and engineering services, as well as incentives for the development of new technologies. This paper outlines the available incentives, and also addresses ways to coordinate the use of tax breaks with government grants and tax-free bond financing in order to maximize benefits for biomass energy projects

  14. Defining the lung outline from a gamma camera transmission attenuation map

    International Nuclear Information System (INIS)

    Fleming, John S; Pitcairn, Gary; Newman, Stephen

    2006-01-01

    Segmentation of the lung outline from gamma camera transmission images of the thorax is useful in attenuation correction and quantitative image analysis. This paper describes and compares two threshold-based methods of segmentation. Simulated gamma camera transmission images of test objects were used to produce a knowledge base of the variation of threshold defining the lung outline with image resolution and chest wall thickness. Two segmentation techniques based on global (GT) and context-sensitive (CST) thresholds were developed and evaluated in simulated transmission images of realistic thoraces. The segmented lung volumes were compared to the true values used in the simulation. The mean distances between segmented and true lung surface were calculated. The techniques were also applied to three real human subject transmission images. The lung volumes were estimated and the segmentations were compared visually. The CST segmentation produced significantly superior segmentations than the GT technique in the simulated data. In human subjects, the GT technique underestimated volumes by 13% compared to the CST technique. It missed areas that clearly belonged to the lungs. In conclusion, both techniques segmented the lungs with reasonable accuracy and precision. The CST approach was superior, particularly in real human subject images

  15. Outline of nuclear power plant project of fast breeder reactor (FBR) 'Monju'

    International Nuclear Information System (INIS)

    Suzuki, Fumio; Higashide, Noboru

    1982-01-01

    The first step of the construction of the fast breeder prototype reactor ''Monju'' in Japan was taken by the declaration of agreement of Fukui Prefecture governor in May, 1982, and the succeeding approval by the cabinet council. In this paper, the outline of the project is described. The paper first introduces the development status of FBRs in the world, and next, describes the progress of planning the ''Monju'' project. Initially, ''Monju'' was invited by Shiraki region of Tsuruga City, but the move of village was not agreed. Thus, the center of the site was moved to ''Haseda'' about 1 km north-east. In addition, there were some limitations, and the layout of the facility and the design of public work structures including harbour construction were done under many limiting conditions. However, the site is rather in good conditions, and the design rationalization was attempted as far as possible within a range which does not affect the safety of the nuclear power plant. The outline of the examination related to public works and the siting conditions are reported, dividing them into topographic features, geology, meteorology, sea conditions, and natural environment. As the public works plan, site preparation, roads, harbour installations and water intake and discharge facility are also described. (Wakatsuki, Y.)

  16. THE ANALYSIS OF INTENSE-DEFORMED MONOLITHIC CONCRETE STRIP STATE OF UNDERGROUND STRUCTURES OF NONCIRCULAR OUTLINE

    Directory of Open Access Journals (Sweden)

    Maria Aleksandrovna Bauer

    2017-12-01

    Full Text Available The research results of intense deformed state (IDS of the crepe and soil massif of un-derground structures having a non-circular outline with a depth of laying up to 50 m in unstable al-luvial rocks with dumps from 0.3 to 0.7 m are presented. The study was carried out by means of modeling the IDS of the soil massif and the hardening concrete of the monolithic support, erected after slaughter moving. To implement the proposed technological solutions ensuring the fixing of underground structures with monolithic concrete, it is necessary to use particularly fast solidifying compounds to exclude the use of temporary crepe. Based on the studies of a number of modifiers, various changes in mechanical properties of the most effective compositions have been established, which are used to simulate the concrete crepe of structures with time-varying characteristics. Purpose: the basis for using resource-saving technology for the construction of underground structures in a non-circular outline in a soil massif. Methods and methodology of the work: the studies were carried out by means of the finite element method (FEM using the optimal design of the experiment. Results: stress distributions were obtained in the hardening concrete crepe structures, stress concentration zones were established, displacement values in the soil massif and their spread on the surface were recieved. Areas of the result application: the results of research work can be used in the design of options for the construction of underground structures.

  17. Plant Growth and Development: An Outline for a Unit Structured Around the Life Cycle of Rapid-Cycling Brassica Rapa.

    Science.gov (United States)

    Becker, Wayne M.

    This outline is intended for use in a unit of 10-12 lectures on plant growth and development at the introductory undergraduate level as part of a course on organismal biology. The series of lecture outlines is structured around the life cycle of rapid-cycling Brassica rapa (RCBr). The unit begins with three introductory lectures on general plant…

  18. Aircraft Fuel, Fuel Metering, Induction and Exhaust Systems (Course Outline), Aviation Mechanics (Power Plant): 9057.02.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This document presents an outline for a 135-hour course designed to help the trainee gain the skills and knowledge necessary to become an aviation powerplant mechanic. The course outlines the theory of operation of various fuel systems, fuel metering, induction, and exhaust system components with an emphasis on troubleshooting, maintenance, and…

  19. An Outline of the Evolution of Rural Cultural Landscapes in Poland

    Directory of Open Access Journals (Sweden)

    KRZYSZTOF KORELESKI

    2007-01-01

    Full Text Available The paper outlines the evolution of rural cultural landscapes in Poland against the background of landscape classification. It defines cultural landscape types and subtypes, based on several criteria of landscape classification, such as: genetic, morphological, functional, and economic. A review of rural landscapes, based on genetic criteria, considers the following historical periods: the primeval community, the feudalism, the manorial system, the industrial revolution, the interwar period of 1918 – 1939, the period of socialist economy, and market economy. The processes that most significantly influenced the contemporary shape of the rural landscape occurred just after the Second World War: urbanization and industrialization, settlement in western and northern territories, as well as structural and spatial transformations that took place after the year 1989 related to the promotion of sustainable and multifunctional development of rural areas.

  20. Outline and handling manual of experimental data time slice monitoring software 'SLICE'

    International Nuclear Information System (INIS)

    Shirai, Hiroshi; Hirayama, Toshio; Shimizu, Katsuhiro; Tani, Keiji; Azumi, Masafumi; Hirai, Ken-ichiro; Konno, Satoshi; Takase, Keizou.

    1993-02-01

    We have developed a software 'SLICE' which maps various kinds of plasma experimental data measured at the different geometrical position of JT-60U and JFT-2M onto the equilibrium magnetic configuration and treats them as a function of volume averaged minor radius ρ. Experimental data can be handled uniformly by using 'SLICE'. Plenty of commands of 'SLICE' make it easy to process the mapped data. The experimental data measured as line integrated values are also transformed by Abel inversion. The mapped data are fitted to a functional form and saved to the database 'MAPDB'. 'SLICE' can read the data from 'MAPDB' and re-display and transform them. Still more 'SLICE' creates run data of orbit following Monte-Carlo code 'OFMC' and tokamak predictive and interpretation code system 'TOPICS'. This report summarizes an outline and the usage of 'SLICE'. (author)

  1. Outline of a relativistic theory for a non-Lorentzian ether

    Energy Technology Data Exchange (ETDEWEB)

    Pocci, G; Sjoedin, T [Ist. di Matematica ' ' Leonida Tonelli' ' , Pisa (Italy)

    1981-06-11

    A simple ether theory permitting transversal contractions and an observer-dependent light velocity is outlined. It is found that the laws of dynamics and electrodynamics have the same form as in special relativity within each inertial frame, but that the transformation properties of the physical quantities differ. To bring the theory in agreement with ''relativistic'' experiments, it suffices to assume that the factor of transversal contraction is close to unity and the velocity of light nearly constant in the interval of made experiments (approximately (0/10/sup -3/)c). New experiments are thus necessary in order to test special relativity, since simplicity arguments alone are not enough to rule out the proposed theory.

  2. Outline of a Hardware Reconfiguration Framework for Modular Industrial Mobile Manipulators

    DEFF Research Database (Denmark)

    Schou, Casper; Bøgh, Simon; Madsen, Ole

    2014-01-01

    This paper presents concepts and ideas of a hard- ware reconfiguration framework for modular industrial mobile manipulators. Mobile manipulators pose a highly flexible pro- duction resource due to their ability to autonomously navigate between workstations. However, due to this high flexibility new...... approaches to the operation of the robots are needed. Reconfig- uring the robot to a new task should be carried out by shop floor operators and, thus, be both quick and intuitive. Late research has already proposed a method for intuitive robot programming. However, this relies on a predetermined hardware...... configuration. Finding a single multi-purpose hardware configuration suited to all tasks is considered unrealistic. As a result, the need for reconfiguration of the hardware is inevitable. In this paper an outline of a framework for making hardware reconfiguration quick and intuitive is presented. Two main...

  3. Future nuclear energy policy based on the Broad Outline of Nuclear Energy Policy

    International Nuclear Information System (INIS)

    Saito, Shinzo

    2006-01-01

    The Broad Outline of Nuclear Energy Policy for about ten years was determined by the Cabinet meeting of Japan. Nuclear power plant safety and regulation, nuclear waste management, nuclear power production and nuclear power research and development were discussed. It determined that 3 nuclear power plants, which are building, should be built, and about 10 plants will be built to product 30 to 40 % of Japan electricity generation after 2030. FBR will be operated until 2050. The nuclear fuel cycle system will be used continuously. The nuclear power plant safety and nuclear waste management are so important for the nuclear industry that these subjects were discussed in detail. In order to understand and use the quantum beam technology, the advanced institutions and equipments and network among scientists, industry and people should be planed and practically used. (S.Y.)

  4. Accident at the Fukushima Dai-ichi nuclear power stations of TEPCO. Outline and lessons learned

    International Nuclear Information System (INIS)

    Tanaka, Shun-ichi

    2012-01-01

    The severe accident that broke out at Fukushima Dai-ichi nuclear power stations on March 11, 2011, caused seemingly infinite damage to the daily life of residents. Serious and wide-spread contamination of the environment occurred due to radioactive materials discharged from nuclear power stations (NPSs). At the same time, many issues were highlighted concerning countermeasures to severe nuclear accidents. The accident is outlined, and lessons learned are extracted with respect to the safety of NPSs, as well as radiation protection of residents under the emergency involving the accident. The materials of the current paper are those released by governmental agencies, academic societies, interim reports of committees under the government, and others. (author)

  5. Classroom tandem – Outlining a model for language learning and ınstruction

    Directory of Open Access Journals (Sweden)

    Katri Karjalaınen

    2013-11-01

    Full Text Available The aim of this paper is to outline classroom tandem by comparing it with informal tandem learning contexts and other language instruction methods. Classroom tandem is used for second language instruction in mixed language groups in the subjects of Finnish and Swedish as L2. Tandem learning entails that two persons with different mother tongues learn each other’s native languages in reciprocal cooperation. The students function, in turns, as a second language learner and as a model in the native language. We aim to give an overview description of the interaction in classroom tandem practice. The empirical data consists of longitudinal video recordings of meetings of one tandem dyad within a co-located Swedishmedium and Finnish-medium school. Focus in the analysis is on the language aspects the informants orient to and topicalize in their interaction. The language aspects vary depending on what classroom activities they are engaged in, text-based or oral activities.

  6. OEI in the future. A strategic outline in a liberalized environment

    International Nuclear Information System (INIS)

    Correlje, A.; Keers, G.; De Wildt, R.

    2000-01-01

    Due to changes in the Dutch energy sector insight is needed in the consequences for the decision making process with respect to energy supply in large new estates. The main purpose of the study on the title subject is to trace the moments in the decision making process where interventions from Novem cause an optimal effect on the realization of energy efficient new estates. In order to test the impact of the assumptions on the decision making process and the impact of the applied tools use is made of existing knowledge on the decision making process and available experience in the participation of employees of Novem (the so-called process managers Optimal Energy Infrastructure (OEI)). An overview is given of the programmes OEI and Loreen (local and regional energy conservation) and how it functioned so far and the consequences of the liberalization of the energy market for those programmes are outlined and discussed. 80 refs

  7. Comments on the theory of radiation risk I Systematic outline of the theory of radiation risk

    CERN Document Server

    Neufeld, J

    1974-01-01

    Presents a systematic outline of the current theory of radiation risk. The most basic ideas of the theory can be expressed by two quantities which represent the administrative approach to radiation risk. These quantities are 'specific dose', D/sub s/, which relates to individual organs or tissues and 'overall dose', D/sub 0/, which relates to the entire human body. By taking D/sub s/ and D/sub 0/ as a starting point and by using postulational methods, two auxiliary quantities have been derived which are 'dose equivalent', D/sub e/(r), and quality factor, Q. Dose equivalent, D/sub e/(r), is a macroscopic field quantity and is, therefore, different from the ICRP defined dose equivalent, H, which is microscopic.

  8. Outline of construction planning on No. 2 Reactor of the Shika Nuclear Power Plant

    International Nuclear Information System (INIS)

    Nakagawa, Tetsuro; Kadoki, Shuichi; Kubo, Tetsuji

    1999-01-01

    The Hokuriku Electric Co., Ltd. carries out the expansion of the Shika Nuclear Power Plant No.2 (ABWR) to start its in March 2006. It is situated in north neighboring side of No. 1 reactor under operation at present, and its main buildings are planned to position a reactor building at mountain side and a turbine building at sea side as well as those in the No. 1 reactor. And, cooling water for steam condenser was taken in from an intake opening built at north side of the lifting space situated at the front of the power plant, and discharged into seawater from a flashing opening positioned about 600 m offing. Here were described on outline of main civil engineering such as base excavation engineering, concrete caisson production, oceanic establishment engineering, and facility for steam condenser, and characteristics of the engineering. (G.K.)

  9. Development of an analytic outline for the aflatoxins analysis in grains and flours

    International Nuclear Information System (INIS)

    Sibaja Adams, Roxana

    2000-01-01

    The instrumental and analytic conditions were optimized for the aflatoxine determination B1, B2, 1 and G2 in corn and peanut byl iquid chromatography of high discharge following the analyzing method AOAC 994,08. Besides, it was defined a function for evaluating the dependence of the chromatographic discharge with the aflatoxine concentration. The analyzing method was validated, and four calibration curves were obtained for the aflatoxine B1, B2, G1 and G2, which turned to have a heterocedastico behavior. The applicability of this method was demonstrated, obtaining imagines of appropriate merit and comparable with those reported by the AOAC. Additionally, the applicability of the chromatographic method was demonstrated in fine layer for the presumptive analysis of aflatoxine, allowing both methods to propose an outline of reliable analysis of real samples [es

  10. Outline of Fukushima nuclear accident and future action. Lessons learned from accident and countermeasure plan

    International Nuclear Information System (INIS)

    Fukuda, Toshihiko

    2012-01-01

    Fukushima nuclear accident was caused by loss of all AC power sources (SBO) and loss of ultimate heat sink (LUHS) at Fukushima Daiichi Nuclear Power Plants (NPPs) hit by the Great East Japan Earthquake. This article reviewed outline of Fukushima nuclear accident progression when on year had passed since and referred to lessons learned from accident and countermeasure plan to prevent severe accident in SBO and LUHS events by earthquake and tsunami as future action. This countermeasure would be taken to (1) prevent serious flooding in case a tsunami overwhelms the breakwater, with improving water tightness of rooms for emergency diesel generator, batteries and power centers, (2) enhance emergency power supply and cooling function with mobile electricity generator, high pressure fire pump car and alternate water supply source, (3) mitigate environmental effects caused by core damage with installing containment filtered venting, and (4) enforce emergency preparedness in case of severe accident. Definite countermeasure plan for Kashiwazaki-Kariwa NPPs was enumerated. (T. Tanaka)

  11. Outline of irradiation service equipment and properties of its electron beam

    International Nuclear Information System (INIS)

    Kagehira, K.; Shakudo, T.

    2002-01-01

    Current ethylene oxide sterilization becomes a subject of discussion on the safety for workers' health. On the other hand, demands for sterilization of disposable health care products and food packaging materials are increasing. On this situation, it is progressing to switch to radiation sterilization witch is easy to adapt to requirements of ISO validation, in particular to electron beam sterilization using electron accelerator, which is safer and easier to control. Our company started electron beam treatment service such as pasteurization, disinfestation, and improvement of polymers as well as sterilization, with introducing a high energy and high power electron accelerator. In this paper, basics of e-beam sterilization, outline of the irradiation service plant and the electron accelerator, and the properties of its electron beam are described. (author)

  12. Outline of UNSCEAR 2013 report (1). Radionuclide releases, dispersion and deposition

    International Nuclear Information System (INIS)

    Nagai, Haruyasu; Kurihara, Osamu

    2014-01-01

    The general assembly of the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) was held in May, 2013 and the influence of the TEPCO Fukushima Daiichi nuclear power station accident on the environment and the human body, which has been analyzed and discussed by many specialists, was reported. The detailed contents of the influence were published in April, 2014 as the UNSCEAR 2013 Report (Vol. I: Report of the UNSCEAR to the General Assembly; Scientific Annex A: Levels and effects of radiation exposure due to the nuclear accident after the 2011 great east-Japan earthquake and tsunami and Vol. II: Scientific Findings on Effects of Radiation Exposure of Children; Scientific Annex B: Effects of radiation exposure of children). In the present paper, the outlines of the Scientific Annex A and the chapter III (Radionuclide releases, dispersion and deposition) in it are described. (K. Kato)

  13. Outline of irradiation service equipment and properties of its electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Kagehira, K.; Shakudo, T. [Nuclear Fuel Industries, Ltd., Osaka (Japan)

    2002-10-01

    Current ethylene oxide sterilization becomes a subject of discussion on the safety for workers' health. On the other hand, demands for sterilization of disposable health care products and food packaging materials are increasing. On this situation, it is progressing to switch to radiation sterilization witch is easy to adapt to requirements of ISO validation, in particular to electron beam sterilization using electron accelerator, which is safer and easier to control. Our company started electron beam treatment service such as pasteurization, disinfestation, and improvement of polymers as well as sterilization, with introducing a high energy and high power electron accelerator. In this paper, basics of e-beam sterilization, outline of the irradiation service plant and the electron accelerator, and the properties of its electron beam are described. (author)

  14. 20% biofuels in 2020. An outline of policy options for the implementation of 20-20

    International Nuclear Information System (INIS)

    Verhagen, B.; Ritter, B.; Van Thuijl, E.; Neeft, J.; Hoogma, R.

    2008-07-01

    This report provides an outline of the technical feasibility of the Dutch target of 20% biofuels on energy basis in 2020. In order to reach this target additional effort is required with respect to the obligatory market share of 10% as proposed by the EU. The first chapters of this report describe the basic data. Chapter 2 gives an overview of developments in the market for transport fuels in the period 2008-2020 and the division of that market in a number of market segments. Chapter 3 provides information on production, distribution, availability of vehicles and user aspects of the main biofuels. Subsequently, chapter 4 addresses the options for achieving the 20% biofuels target. Chapter 5 sketches the variants on the basic route and calculates the costs of these variants. Chapter 6 discusses the timing and cost of the basic route and the variants. The main conclusion of this report is that 20% blending can be achieved. [mk] [nl

  15. Electric Power Society in a new Situation - an Outline for an Actor Directed Strategy facing the Nuclear Power Phase Out

    International Nuclear Information System (INIS)

    1986-01-01

    A proposal is outlined implying the general electricity tax to be progressive in relation to the total power consumption. A level of 100-110 TWh is proposed as basis for the progressiveness. The tax curve will be levelled to yield an unchanged taxation today. The outline also involves a separate tax on condensing power production compensated by a reduction of the general electricity tax

  16. Efficiency versus cost of alternative fuels from renewable resources: outlining decision parameters

    International Nuclear Information System (INIS)

    Kaul, Sanjay; Edinger, Raphael

    2004-01-01

    In the discussion of traditional versus renewable energies and alternatives to conventional crude oil-based fuels in the transportation sector, efficiency calculations are but one decision making parameter. Comparing the assets and liabilities of fossil-based and renewable fuels in the transportation sector, further aspects such as centralized versus decentralized technologies, cost evaluations, taxation, and ecological/social benefits have to be taken into account. This paper outlines the driving parameters for shifting toward alternative fuels based on fossil or renewable resources and their use in innovative vehicle technologies such as advanced internal combustion and fuel cell electric drive systems. For the decision in favor or against an alternative fuel to be introduced to the mass market, automotive technologies and the energy supply system have to be examined in an integrated way. From an economic and technological perspective, some fuels may be even incompatible with the trend toward using renewable resources that have advantages in decentralized systems. Beyond efficiency calculations, political and industrial interests arise and may be influential to reshaping our currently crude oil-based mobility sector

  17. Main Ingredients for Success in L2 Academic Writing: Outlining, Drafting and Proofreading.

    Science.gov (United States)

    Munoz-Luna, Rosa

    2015-01-01

    Spanish undergraduates of English Studies are required to submit their essays in academic English, a genre which most of them are not acquainted with. This paper aims to explore the extralinguistic side of second language (L2) academic writing, more specifically, the combination of metalinguistic items (e.g. transition and frame markers, among others) with students' writing strategies when composing an academic text in L2 English. The research sample conveys a group of 200 Spanish undergraduates of English Studies; they are in their fourth year, so they are expected to be proficient in English academic writing but their written production quality varies considerably. Results are analysed following a mixed methodology by which metalinguistic items are statistically measured, and then contrasted with semi-structured interview results; SPSS and NVivo provide quantitative and qualitative outcomes, respectively. The analyses reveal that undergraduate students who produce complex sentences and more coherent texts employ a wider range of writing strategies both prior and while writing, being able to (un)consciously structure and design their texts more successfully. These high-scoring students make more proficient use of complex transition markers for coherence and frame markers for textual cohesion; their commonly used (pre-)writing strategies are drafting, outlining, and proofreading.

  18. Main Ingredients for Success in L2 Academic Writing: Outlining, Drafting and Proofreading.

    Directory of Open Access Journals (Sweden)

    Rosa Munoz-Luna

    Full Text Available Spanish undergraduates of English Studies are required to submit their essays in academic English, a genre which most of them are not acquainted with. This paper aims to explore the extralinguistic side of second language (L2 academic writing, more specifically, the combination of metalinguistic items (e.g. transition and frame markers, among others with students' writing strategies when composing an academic text in L2 English. The research sample conveys a group of 200 Spanish undergraduates of English Studies; they are in their fourth year, so they are expected to be proficient in English academic writing but their written production quality varies considerably. Results are analysed following a mixed methodology by which metalinguistic items are statistically measured, and then contrasted with semi-structured interview results; SPSS and NVivo provide quantitative and qualitative outcomes, respectively. The analyses reveal that undergraduate students who produce complex sentences and more coherent texts employ a wider range of writing strategies both prior and while writing, being able to (unconsciously structure and design their texts more successfully. These high-scoring students make more proficient use of complex transition markers for coherence and frame markers for textual cohesion; their commonly used (pre-writing strategies are drafting, outlining, and proofreading.

  19. Quantitative Outline-based Shape Analysis and Classification of Planetary Craterforms using Supervised Learning Models

    Science.gov (United States)

    Slezak, Thomas Joseph; Radebaugh, Jani; Christiansen, Eric

    2017-10-01

    The shapes of craterform morphology on planetary surfaces provides rich information about their origins and evolution. While morphologic information provides rich visual clues to geologic processes and properties, the ability to quantitatively communicate this information is less easily accomplished. This study examines the morphology of craterforms using the quantitative outline-based shape methods of geometric morphometrics, commonly used in biology and paleontology. We examine and compare landforms on planetary surfaces using shape, a property of morphology that is invariant to translation, rotation, and size. We quantify the shapes of paterae on Io, martian calderas, terrestrial basaltic shield calderas, terrestrial ash-flow calderas, and lunar impact craters using elliptic Fourier analysis (EFA) and the Zahn and Roskies (Z-R) shape function, or tangent angle approach to produce multivariate shape descriptors. These shape descriptors are subjected to multivariate statistical analysis including canonical variate analysis (CVA), a multiple-comparison variant of discriminant analysis, to investigate the link between craterform shape and classification. Paterae on Io are most similar in shape to terrestrial ash-flow calderas and the shapes of terrestrial basaltic shield volcanoes are most similar to martian calderas. The shapes of lunar impact craters, including simple, transitional, and complex morphology, are classified with a 100% rate of success in all models. Multiple CVA models effectively predict and classify different craterforms using shape-based identification and demonstrate significant potential for use in the analysis of planetary surfaces.

  20. The normal heart - Part I. The cardiac outline and chamber anatomy

    International Nuclear Information System (INIS)

    Walker, J.

    1985-01-01

    The heart is the most open and the most secret object in all radiology. Surrounded by alveolar air (its natural contrast) its outline dominates the chest X-ray. The lung vessels, responding to any change in function, are openly displayed, but within the heart borders the X-ray shadow is obscure and its parts invisible; moreover its vital purpose, movement, is not seen. This hollow muscular organ is conical, its apex points downwards, forwards and to the left at 60 0 to the midline. It is roughly 12 cm in length and weighs about 350 g. The main vessels enter and leave at the base posteriorly. Its apex is free within the serous cavity of the pericardium but its base is fixed by vessels and by the pericardial reflexions which surround them. The embryonic dorsal mesopericardium between arteries and veins breaks down to give the transverse sinus which frees the heart posteriorly, and the reflexions around the pulmonary veins form a blind sac, the oblique sinus, which opens to the left. All is enclosed by fibrous pericardium and occupies the anterior mediastinum at the level of the 6th-9th dorsal vertebrae from which it is separated by the oesophagus, aorta and spinal muscles. It rests on the central tendon of the diaphragm and laterally the right and left lungs envelop it over more than two thirds of its surface

  1. Outlines of the PBL Working programme 2012; Hoofdlijnen PBL Werkprogramma 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-01-15

    In this note, the Netherlands Environmental Assessment Agency (PBL) sketches the outlines of its working programme for 2012. With the intended research in this working programme, PBL aims to contribute to scientific substantiation and evaluation of the Dutch cabinet's policy in a wide range of areas: environment, mobility, space, living, energy, water, food provision, nature, international collaboration, declining population, administrative reforms and international competitive position. The PBL study is aligned to three (of the six) governmental strategic knowledge themes that have been selected for this administrative period, i.e. Dealing with scarcity of resources and space; (2) the competitive position of the Netherlands; (3) Towards a new division of responsibilities among the state and society and a new balance between rights and obligations [Dutch] Het Planbureau voor de Leefomgeving (PBL) schetst in deze notitie de hoofdlijnen van zijn werkprogramma voor 2012. Met het voorgenomen onderzoek in dit werkprogramma wil het PBL bijdragen aan wetenschappelijke onderbouwing en evaluatie van het kabinetsbeleid op een breed scala aan terreinen: milieu, mobiliteit, ruimte, wonen, energie, water, voedselvoorziening, natuur, internationale samenwerking, bevolkingskrimp, decentralisatie, bestuurlijke vernieuwing en internationale concurrentiepositie. PBL-onderzoek sluit aan bij drie (van de zes) rijksbrede strategische kennisthema's die zijn gekozen voor deze kabinetsperiode, te weten: (1) Omgaan met schaarste aan ruimte en grondstoffen; (2) Het concurrentievermogen van Nederland; (3) Naar een nieuwe verantwoordelijkheidsverdeling tussen staat en samenleving en een nieuwe balans tussen rechten en plichten.

  2. A framework provided an outline toward the proper evaluation of potential screening strategies.

    Science.gov (United States)

    Adriaensen, Wim J; Matheï, Cathy; Buntinx, Frank J; Arbyn, Marc

    2013-06-01

    Screening tests are often introduced into clinical practice without proper evaluation, despite the increasing awareness that screening is a double-edged sword that can lead to either net benefits or harms. Our objective was to develop a comprehensive framework for the evaluation of new screening strategies. Elaborating on the existing concepts proposed by experts, a stepwise framework is proposed to evaluate whether a potential screening test can be introduced as a screening strategy into clinical practice. The principle of screening strategy evaluation is illustrated for cervical cancer, which is a template for screening because of the existence of an easily detectable and treatable precursor lesion. The evaluation procedure consists of six consecutive steps. In steps 1-4, the technical accuracy, place of the test in the screening pathway, diagnostic accuracy, and longitudinal sensitivity and specificity of the screening test are assessed. In steps 5 and 6, the impact of the screening strategy on the patient and population levels, respectively, is evaluated. The framework incorporates a harm and benefit trade-off and cost-effectiveness analysis. Our framework provides an outline toward the proper evaluation of potential screening strategies before considering implementation. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. Linguistic research in the empirical paradigm as outlined by Mario Bunge.

    Science.gov (United States)

    Zielińska, Dorota

    2016-01-01

    In view of the critique of the methodology of the dominant interdisciplinary research involving language studies as the main component, in particular clinical linguistics, Cummings (Pragmatic disorders. Perspectives in pragmatics, philosophy and psychology, vol 3. Springer, Dordrecht, 2014) proposes that "It is perhaps appropriate at this point to move the debate onto non-empirical grounds." In Cummings (2014: 113) she starts such a debate on the grounds of the philosophy of language and pragmatics. In this article, I propose to expand that debate by including the input of the philosophy of science. I start the discussion by presenting the way one may carry out language research in the paradigm of empirical sciences from the perspective outlined in Bunge (Scientific research. Strategy and philosophy. Berlin, Springer, 1967; Method, model and matter (synthese library). D. Reidel Publishing Company, Dordrecht, 1973; Emergence and convergence: qualitative novelty and the unity of knowledge. University of Toronto Press, Toronto, 2003) and constrained by Altmann's (Towards a theory of language. Glottometrica 1:1-25, 1978) assumption about self-originating and self-regulatory nature of language.

  4. Outline of a future security system to provide physical protection of nuclear installations

    International Nuclear Information System (INIS)

    Rossnagel, A.

    1984-01-01

    Nuclear energy, within three or four decades, may become a main pillar of the world's energy supply. The author discusses the problems entailed by the necessity to protect nuclear facilities against assaults, and whether this can be ensured without interference with civic rights. The method applied by the author to show the significance of the problems is to explain the current situation, and to compare it with a plausible outline of the developments to be expected over the next 50 years. He shows the hazards to be taken into account due to criminal actions by persons from outside, or by persons working in nuclear facilities. A main problem is the fact that the security system to be set up has to encompass not only the nuclear installation itself, but also the surrounding area, and the measures to be taken will have an impact on the society, which necessarily will curtail personal freedom. The author presumes that the necessity to guarantee physical protection of nuclear facilities will lead to a modification of the meaning of basic rights, and states his anxiety that security for nuclear installations might affect our concept of freedom. (HSCH) [de

  5. Outline of results of safety research (in nuclear fuel cycle field in fiscal year 1996)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The safety research in Power Reactor and Nuclear Fuel Development Corporation in fiscal year 1996 has been carried out based on the basic plan of safety research (from fiscal year 1996 to 2000) which was decided in March, 1996. In this report, on nuclear fuel cycle field, namely all the subjects in the fields of nuclear fuel facilities, environmental radioactivity and waste disposal, and the subjects related to nuclear fuel facilities among the fields of aseismatic and probabilistic safety assessments, the results of research in fiscal year 1996, the first year of the 5-year project, are summarized together with the outline of the basic plan of safety research. The basic policy, objective and system for promotion of the safety research are described. The objectives of the safety research are the advancement of safety technology, the safety of facilities, stable operation techniques, the safety design and the evaluation techniques of next generation facilities, and the support of transferring nuclear fuel cycle to private businesses. The objects of the research are uranium enrichment, fuel fabrication and reprocessing, and waste treatment and storage. 52 investigation papers of the results of the safety research in nuclear fuel cycle field in fiscal year 1996 are collected in this report. (K.I.)

  6. Outline of the radioactive waste management strategy at the national radioactive waste disposal facility 'Ekores'

    International Nuclear Information System (INIS)

    Rozdyalovskaya, L.F.; Tukhto, A.A.; Ivanov, V.B.

    2000-01-01

    The national Belarus radioactive waste disposal facility 'Ekores' was started in 1964 and was designed for radioactive waste coming from nuclear applications in industry, medicine and research. It is located in the neighbourhood of Minsk (2 Mil. people) and it is the only one in this country. In 1997 the Government initiated the project for the facility reconstruction. The main reconstruction goal is to upgrade radiological safety of the site by creating adequate safety conditions for managing radioactive waste at the Ekores disposal facility. This covers modernising technologies for new coming wastes and also that the wastes currently disposed in the pits are retrieved, sorted and treated in the same way as new coming wastes. The reconstruction project developed by Belarus specialists was reviewed by the IAEA experts. The main provisions of the revised project strategy are given in this paper. The paper's intention is to outline the technical measures which may be taken at standard 'old type Soviet Radon' disposal facility so as to ensure the radiological safety of the site. (author)

  7. Sketch-based 3D modeling by aligning outlines of an image

    Directory of Open Access Journals (Sweden)

    Chunxiao Li

    2016-07-01

    Full Text Available In this paper we present an efficient technique for sketch-based 3D modeling using automatically extracted image features. Creating a 3D model often requires a drawing of irregular shapes composed of curved lines as a starting point but it is difficult to hand-draw such lines without introducing awkward bumps and edges along the lines. We propose an automatic alignment of a user׳s hand-drawn sketch lines to the contour lines of an image, facilitating a considerable level of ease with which the user can carelessly continue sketching while the system intelligently snaps the sketch lines to a background image contour, no longer requiring the strenuous effort and stress of trying to make a perfect line during the modeling task. This interactive technique seamlessly combines the efficiency and perception of the human user with the accuracy of computational power, applied to the domain of 3D modeling where the utmost precision of on-screen drawing has been one of the hurdles of the task hitherto considered a job requiring a highly skilled and careful manipulation by the user. We provide several examples to demonstrate the accuracy and efficiency of the method with which complex shapes were achieved easily and quickly in the interactive outline drawing task.

  8. Lower hybrid heating and current drive in Iter operation scenarios and outline system design

    International Nuclear Information System (INIS)

    1994-11-01

    Lower Hybrid Waves (LHW) are considered a valid method of plasma heating and the best demonstrated current drive method. Current drive by LHW possesses the unique feature, as compared to the other methods, to retain a good current drive efficiency in plasma regions of low to medium temperature, or in low-β phases of the discharges. This makes them an essential element to realize the so called 'advanced steady-state Tokamak scenarios' in which a hollow current density profile (deep shear reversal) - established during the ramp-up of the plasma current - offers the prospects of improved confinement and an MHD-stable route to continuous burn. This report contains both modelling and design studies of an LHW system for ITER. It aims primarily at the definition of concepts and parameters for steady-state operation using LHW combined with Fast Waves (FW), or other methods of generating a central seed current for high bootstrap current operation. However simulations addressing the use of LHW for current profile control in the high current pulsed operation scenario are also presented. The outline design of a LHW system which covers the needs for both pulsed and steady-state operation is described in detail. (author). 28 refs., 49 figs

  9. Outlining the psychopathology behind a case of conversion syndrome: Is a holistic approach beneficial?

    Science.gov (United States)

    Aquilina, Francesca Falzon; Fondacaro, Daniel Vella

    2016-03-01

    Conversion disorder refers to a set of symptoms where no relevant organic cause is found. These include sensory/motor disturbances, and other neurological symptoms, such as pseudoseizures. Patients with this condition may, by having it, achieve a primary or secondary gain. The condition should be diagnosed when all the relevant investigations are inconclusive. In this case, we use the bio-psycho-social model for the interpretation and guidance of treatment. We also demonstrate how a holistic approach is beneficial when it comes to a multi-dimensional interpretation of such a case. This review outlines a case of a patient with several neurological and orthopedic problems who failed to improve with several treatment plans and surgical interventions. After several years of medical and surgical consultations, a thorough analysis by psychiatrists was made, resulting in a diagnosis of conversion syndrome. The patient gradually improved on psychiatric treatment, including psychotherapy, and with the necessary psychiatric follow-ups. © 2016 The Institute of Psychology, Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.

  10. Main Ingredients for Success in L2 Academic Writing: Outlining, Drafting and Proofreading

    Science.gov (United States)

    Munoz-Luna, Rosa

    2015-01-01

    Spanish undergraduates of English Studies are required to submit their essays in academic English, a genre which most of them are not acquainted with. This paper aims to explore the extralinguistic side of second language (L2) academic writing, more specifically, the combination of metalinguistic items (e.g. transition and frame markers, among others) with students’ writing strategies when composing an academic text in L2 English. The research sample conveys a group of 200 Spanish undergraduates of English Studies; they are in their fourth year, so they are expected to be proficient in English academic writing but their written production quality varies considerably. Results are analysed following a mixed methodology by which metalinguistic items are statistically measured, and then contrasted with semi-structured interview results; SPSS and NVivo provide quantitative and qualitative outcomes, respectively. The analyses reveal that undergraduate students who produce complex sentences and more coherent texts employ a wider range of writing strategies both prior and while writing, being able to (un)consciously structure and design their texts more successfully. These high-scoring students make more proficient use of complex transition markers for coherence and frame markers for textual cohesion; their commonly used (pre-)writing strategies are drafting, outlining, and proofreading. PMID:26046836

  11. USING VARIOUS VISUALIZATION TECHNIQUES TO OUTLINE VULNERABILITY TO DROUGHT IN THE REPUBLIC OF MOLDOVA

    Directory of Open Access Journals (Sweden)

    CONSTANṬA BORONEANṬ

    2013-11-01

    Full Text Available Using visualization techniques to outline vulnerability to drought in the Republic of Moldova. This paper is a demonstration of use of various visualization techniques in representing the results on vulnerability to drought at various times scales in the Republic of Moldova. Monthly precipitation totals from simulated data at 10 km horizontal resolution with a regional climatic model RegCM, CRU TS2.10 land observation data set at 0.5ºx0.5º horizontal resolution and observations recorded at 15 meteorological stations in Moldova were used to compare the annual cycle of precipitation, seasonal variability of precipitation, and the spatial and temporal evolution of drought. The Empirical Orthogonal Functions (EOF analysis was used to identify the principal modes of seasonal variability of precipitation over the country and the Standardized Precipitation Index (SPI was calculated as an indicator of drought or wetness at various time scales (1 to 24 months. The period of analysis was 1960-1997. One of the visualization techniques was the Grid Analysis and Display System (GrADS which is an easy manipulation and visualization tool for gridded and station meteorological data. We used it to represent the RegCM and CRU data on their grids. The kriging interpolation with a Gaussian model variance was selected as a suitable interpolation tool for the spatial distribution of the SPI and EOF over Moldova. For temporal diagram and mapping, Golden Software Surfer 9.0 and ArcGis Software 9.1 were used. The results presented with these visualization tools emphasize precipitation and drought characteristics over Moldova domain.

  12. Investigation research of core-basic information associated with the coupling analysis. Outline report

    International Nuclear Information System (INIS)

    Kataoka, Shinichi; Matsunaga, Kenichi; Ishihara, Yoshinao; Kawahara, Kenichi; Neyama, Atsushi; Nakagawa, Koichi; Iwata, Hiroshi; Mori, Koji

    2001-03-01

    The newest literature information in the foreign countries was researched, and this research showed the basic concept of the coupling analysis code to realize coupling analysis in near field of the geological disposal system. The outline of this research is shown in the following. (1) The combination of M (Mechanical) and C (Chemistry) is placed on the weak relations, because coupling analysis of the United States Yucca Mountain limits a site and the specifications of engineered barrier. (2) One of the purposes of this research is information collecting about coupling analysis code NUFT-C adopted in the United States Yucca Mountain. Therefore, we carried out an information exchange with the United States Lawrence Livermore National Laboratory. We could collect the development purpose of analysis code, key function, and information such as a test case analysis. (3) The investigation of the analysis code concerned with the newest information of coupling analysis which contains the geochemistry process and 2 phase system was done based on the public information for the purpose of building some concept of the coupling analysis code, the extraction of the development issues. It could be understood about the future development strategy and the precaution in addition to a phenomenon to deal with, the current status of the coupling analysis technique as a result of the investigation. (4) It was cleared about the mission of the coupling analysis code and the requirement items (function, quality) by this research. Then, some development options were presented. (5) It was studied about the procedure of developing it to satisfy the above requirement toward the conditions that a site isn't selected, the short development. The tool (Diffpack) which could cope with the speed-up of the calculation time and visualization flexibly was effective, and it was summarized about the test case by using this tool, the key function of this tool as that result. (author)

  13. 1000kW phosphoric acid fuel cell power plant. Outline of the plant

    Energy Technology Data Exchange (ETDEWEB)

    Shinobe, Kenji; Suzuki, Kazuo; Kaneko, Hideo

    1988-02-10

    The outline of the 1000KW phosphoric acid fuel cell power plant, developed as part of the Moonlight plan, was described. The plant was composed of 4 stacks of 260KW DC output. They were devided into two train with 680V and 765A. The generation efficiency of the plant was 40% and more. Steam reforming of natural gas was used. As the fuel, fuel cell exhaust gas was used in composition with the natural gas. The DC-AC inverter had an efficiency of 96%. The capacity of hot water generator and demineralized water plant for cell cooling were 2t/h and 1.6t/h, respectively, and air-system was incorporated. In September of 1987, the plant has succeeded in 1000KW power generation, and put in operation now. Under the 100% loaded condition, each cell had a voltage of 0.7V with little variation, and the current was 200mA/cm/sup 2/. No problems were found in cooling conditions and in the control of interpole differential pressure. The reformer has been operated for 1200h scince its commisioning, and had experiences of 100 times on start up-shut down operations, the reformer also indicated good performances in the gas compositions. The starting time of 8h and the load follow-up rate 10%/min remain as the subjects for shortening. DC-AC conversion was good. The concentration of NOx and the noise level satisfied the target values. (12 figs, 1 tab)

  14. The outline report of advanced basic engineering research in the fiscal year 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The JNC has initiated the cooperation with universities and research institutes for advanced basic engineering on 1995. The number of research cooperation theme is increasing and satisfactorily improving in the forth year, 1998. The objective of this program is to promote the advanced basic engineering research with universities and research institutes in relation with the JNC's projects. The facilities and equipment of the JNC are mainly provided to the cooperation. The JNC has settled the research cooperation themes. The universities and research institute have applied to the themes with their issues, working plans and personnel. The JNC has selected the issues and personnel, and put into practice the cooperation with accepting guest staffs and/or research fellows from the universities. This report summarizes the results of the advanced basic engineering research cooperation executed in the fiscal year, 1998. The total number of issues is 34 for the 29 themes; those are categorized in to two groups. The one is related to the fast breeder reactor technologies and the other is on the environmental technologies. The 12 issues are finished in the fiscal year, 1998, in which the 9 issues are for the fast breeder reactor technologies and the 3 issues are for the environmental technologies. The themes/the issues, the host group, host key persons, university side key persons, a form of cooperation are summarized in the tables. The summary reports of research activities by the all cooperators are presented under the particular format. Those describe the total schedule, a form of cooperation, the research objective, the outline of research contents, main facilities for using, research status, research results, future schedules and bibliographies relevant to the research cooperation. The 25 tables and 158 figures are included. (Y. Tanaka)

  15. Development of the Nuclear Ship Database. 1. Outline of the Nuclear Ship Experimental Database

    Energy Technology Data Exchange (ETDEWEB)

    Kyouya, Masahiko; Ochiai, Masa-aki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Hashidate, Kouji

    1995-03-01

    We obtained the experimental data on the effects of the ship motions and the change in load and caused by the ship operations, the waves, the winds etc., to the nuclear power plant behavior, through the Power-up Tests and Experimental Voyages of the Nuclear Ship MUTSU. Moreover, we accumulated the techniques, the knowledge and others on the Nuclear Ship development at the each stage of the N.S. MUTSU Research and Development program, such as the design stage, the construction stage, the operation stage and others. These data, techniques, knowledge and others are the assembly of the experimental data and the experiences through the design, the construction and the operation of the first nuclear ship in JAPAN. It is important to keep and pigeonhole these products of the N.S. MUTSU program in order to utilize them effectively in the research and development of the advanced marine reactor, since there is no construction plan of the nuclear ship for the present in JAPAN. We have been carrying out the development of the Nuclear Ship Database System since 1991 for the purpose of effective utilization of the N.S. MUTSU products in the design study of the advanced marine reactors. The part of the Nuclear Ship Database System on the experimental data, called Nuclear Ship Experimental Database, was already accomplished and utilized since 1993. This report describes the outline and the use of the Nuclear Ship Experimental Database.The remaining part of the database system on the documentary data, called Nuclear Ship Documentary Database, are now under development. (author).

  16. Development of the Nuclear Ship Database. 1. Outline of the Nuclear Ship Experimental Database

    International Nuclear Information System (INIS)

    Kyouya, Masahiko; Ochiai, Masa-aki; Hashidate, Kouji.

    1995-03-01

    We obtained the experimental data on the effects of the ship motions and the change in load and caused by the ship operations, the waves, the winds etc., to the nuclear power plant behavior, through the Power-up Tests and Experimental Voyages of the Nuclear Ship MUTSU. Moreover, we accumulated the techniques, the knowledge and others on the Nuclear Ship development at the each stage of the N.S. MUTSU Research and Development program, such as the design stage, the construction stage, the operation stage and others. These data, techniques, knowledge and others are the assembly of the experimental data and the experiences through the design, the construction and the operation of the first nuclear ship in JAPAN. It is important to keep and pigeonhole these products of the N.S. MUTSU program in order to utilize them effectively in the research and development of the advanced marine reactor, since there is no construction plan of the nuclear ship for the present in JAPAN. We have been carrying out the development of the Nuclear Ship Database System since 1991 for the purpose of effective utilization of the N.S. MUTSU products in the design study of the advanced marine reactors. The part of the Nuclear Ship Database System on the experimental data, called Nuclear Ship Experimental Database, was already accomplished and utilized since 1993. This report describes the outline and the use of the Nuclear Ship Experimental Database.The remaining part of the database system on the documentary data, called Nuclear Ship Documentary Database, are now under development. (author)

  17. Integration of protein phosphorylation, acetylation, and methylation data sets to outline lung cancer signaling networks.

    Science.gov (United States)

    Grimes, Mark; Hall, Benjamin; Foltz, Lauren; Levy, Tyler; Rikova, Klarisa; Gaiser, Jeremiah; Cook, William; Smirnova, Ekaterina; Wheeler, Travis; Clark, Neil R; Lachmann, Alexander; Zhang, Bin; Hornbeck, Peter; Ma'ayan, Avi; Comb, Michael

    2018-05-22

    Protein posttranslational modifications (PTMs) have typically been studied independently, yet many proteins are modified by more than one PTM type, and cell signaling pathways somehow integrate this information. We coupled immunoprecipitation using PTM-specific antibodies with tandem mass tag (TMT) mass spectrometry to simultaneously examine phosphorylation, methylation, and acetylation in 45 lung cancer cell lines compared to normal lung tissue and to cell lines treated with anticancer drugs. This simultaneous, large-scale, integrative analysis of these PTMs using a cluster-filtered network (CFN) approach revealed that cell signaling pathways were outlined by clustering patterns in PTMs. We used the t-distributed stochastic neighbor embedding (t-SNE) method to identify PTM clusters and then integrated each with known protein-protein interactions (PPIs) to elucidate functional cell signaling pathways. The CFN identified known and previously unknown cell signaling pathways in lung cancer cells that were not present in normal lung epithelial tissue. In various proteins modified by more than one type of PTM, the incidence of those PTMs exhibited inverse relationships, suggesting that molecular exclusive "OR" gates determine a large number of signal transduction events. We also showed that the acetyltransferase EP300 appears to be a hub in the network of pathways involving different PTMs. In addition, the data shed light on the mechanism of action of geldanamycin, an HSP90 inhibitor. Together, the findings reveal that cell signaling pathways mediated by acetylation, methylation, and phosphorylation regulate the cytoskeleton, membrane traffic, and RNA binding protein-mediated control of gene expression. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

  18. Outline of facility for studying high level radioactive materials (CPF) and study programmes

    International Nuclear Information System (INIS)

    Sakamoto, Motoi

    1983-01-01

    The Chemical Processing Facility for studying high level radioactive materials in Tokai Works of Power Reactor and Nuclear Fuel Development Corp. is a facility for fundamental studies centering around hot cells, necessary for the development of fuel recycle techniques for fast breeder reactors, an important point of nuclear fuel cycle, and of the techniques for processing and disposing high level radioactive liquid wastes. The operation of the facility was started in 1982, for both the system A (the test of fuel recycle for fast breeder reactors) and the system B (the test of vitrification of high level liquid wastes). In this report, the outline of the facility, the contents of testings and the reflection of the results are described. For the fuel recycle test, the hot test of the spent fuel pins of JOYO MK-1 core was started, and now the uranium and plutonium extraction test is underway. The scheduled tests are fuel solubility, the confirmation of residual properties in fuel melting, the confirmation of extracting conditions, the electrolytic reduction of plutonium, off-gas behaviour and the test of material reliability. For the test of vitrification of high level liquid wastes, the fundamental test on the solidifying techniques for the actual high level wastes eluted from the Tokai reprocessing plant has been started, and the following tests are programmed: Assessment of the properties of actual liquid wastes, denitration and concentration test, vitrification test, off-gas treatment test, the test of evaluating solidified wastes, and the test of storing solidified wastes. These test results are programmed to be reflected to the safety deliberation and the demonstration operation of a vitrification pilot plant. (Wakatsuki, Y.)

  19. The outline report of advanced basic engineering research in the fiscal year 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The JNC has initiated the cooperation with universities and research institutes for advanced basic engineering on 1995. The number of research cooperation theme is increasing and satisfactorily improving in the forth year, 1998. The objective of this program is to promote the advanced basic engineering research with universities and research institutes in relation with the JNC's projects. The facilities and equipment of the JNC are mainly provided to the cooperation. The JNC has settled the research cooperation themes. The universities and research institute have applied to the themes with their issues, working plans and personnel. The JNC has selected the issues and personnel, and put into practice the cooperation with accepting guest staffs and/or research fellows from the universities. This report summarizes the results of the advanced basic engineering research cooperation executed in the fiscal year, 1998. The total number of issues is 34 for the 29 themes; those are categorized in to two groups. The one is related to the fast breeder reactor technologies and the other is on the environmental technologies. The 12 issues are finished in the fiscal year, 1998, in which the 9 issues are for the fast breeder reactor technologies and the 3 issues are for the environmental technologies. The themes/the issues, the host group, host key persons, university side key persons, a form of cooperation are summarized in the tables. The summary reports of research activities by the all cooperators are presented under the particular format. Those describe the total schedule, a form of cooperation, the research objective, the outline of research contents, main facilities for using, research status, research results, future schedules and bibliographies relevant to the research cooperation. The 25 tables and 158 figures are included. (Y. Tanaka)

  20. Outlines of JAEA's instructor training program and future prospects

    International Nuclear Information System (INIS)

    Hidaka, Akihide; Nakamura, Kazuyuki; Watanabe, Yoko; Yabuuchi, Yukiko; Arai, Nobuyoshi; Sawada, Makoto; Yamashita, Kiyonobu; Sawai, Tomotsugu; Murakami, Hiroyuki

    2015-01-01

    trainers in Asian counties. Present paper summarizes the outlines, experiences and future prospects of ITP. (author)

  1. Predicting Outcome in Subarachnoid Hemorrhage (SAH) Utilizing the Full Outline of UnResponsiveness (FOUR) Score.

    Science.gov (United States)

    Zeiler, F A; Lo, B W Y; Akoth, E; Silvaggio, J; Kaufmann, A M; Teitelbaum, J; West, M

    2017-12-01

    Existing scoring systems for aneurysmal subarachnoid hemorrhage (SAH) patients fail to accurately predict patient outcome. Our goal was to prospectively study the Full Outline of UnResponsiveness (FOUR) score as applied to newly admitted aneurysmal SAH patients. All adult patients presenting to Health Sciences Center in Winnipeg from January 2013 to July 2015 (2.5 year period) with aneurysmal SAH were prospectively enrolled in this study. All patients were followed up to 6 months. FOUR score was calculated upon admission, with repeat calculation at 7 and 14 days. The primary outcomes were: mortality, as well as dichotomized 1- and 6-month Glasgow Outcome Scale (GOS) and modified Rankin Scale (mRS) values. Sixty-four patients were included, with a mean age of 54.2 years (range 26-85 years). The mean FOUR score upon admission pre- and post-external ventricular drain (EVD) was 10.3 (range 0-16) and 11.1 (range 3-16), respectively. There was a statistically significant association between pre-EVD FOUR score (total, eye, respiratory and motor sub-scores) with mortality, 1-month GOS, and 6-month GOS/mRS (p FOUR scores were associated with mortality, 1-month GOS/mRS, and 6-month GOS/mRS (p FOUR scores were associated with 6-month GOS (p FOUR score was associated with the development of clinical vasospasm (p FOUR score at admission and day 7 post-SAH is associated with mortality, 1-month GOS/mRS, and 6-month GOS/mRS. The FOUR score at day 14 post-SAH is associated with 6-month GOS. The brainstem sub-score was not associated with 1- or 6-month primary outcomes.

  2. Outline of center for research and development in Rokkasho reprocessing plant site

    International Nuclear Information System (INIS)

    Araya, S.; Kanatsugu, K.; Shakutsui, M.

    1998-01-01

    , were also imported from France to confirm operability and reliability. Full scale outline mock-up pulsed columns and piping are installed in a cell simulated to the layout of the plant to demonstrate and confirm remote inspection for equipment. (author)

  3. Outline of the Fukushima Daiichi Accident. Lessons Learned and Safety Enhancements

    Science.gov (United States)

    Hirano, Masashi

    2017-09-01

    Nuclear Regulation Authority (NRA) was established on September 19, 2012. The NRA very urgently developed and issued the new regulatory requirements on July 8, 2014, taking into the account the lessons learned from the accident. It is noted that the NRA issued the Statement of Nuclear Safety Culture on May 27, 2015 which clearly expressed the NRA's commitment to break with the safety myth. This paper briefly presents the outline of the Fukushima Daiichi accident and summarizes the major lessons learned having been drawn and safety enhancements having been done in Japan for the purpose of giving inputs to the discussions to be taken place in the Special Invited Session "Fukushima, 5 years after".

  4. Use of Maximum Intensity Projections (MIPs) for target outlining in 4DCT radiotherapy planning.

    Science.gov (United States)

    Muirhead, Rebecca; McNee, Stuart G; Featherstone, Carrie; Moore, Karen; Muscat, Sarah

    2008-12-01

    Four-dimensional computed tomography (4DCT) is currently being introduced to radiotherapy centers worldwide, for use in radical radiotherapy planning for non-small cell lung cancer (NSCLC). A significant drawback is the time required to delineate 10 individual CT scans for each patient. Every department will hence ask the question if the single Maximum Intensity Projection (MIP) scan can be used as an alternative. Although the problems regarding the use of the MIP in node-positive disease have been discussed in the literature, a comprehensive study assessing its use has not been published. We compared an internal target volume (ITV) created using the MIP to an ITV created from the composite volume of 10 clinical target volumes (CTVs) delineated on the 10 phases of the 4DCT. 4DCT data was collected from 14 patients with NSCLC. In each patient, the ITV was delineated on the MIP image (ITV_MIP) and a composite ITV created from the 10 CTVs delineated on each of the 10 scans in the dataset. The structures were compared by assessment of volumes of overlap and exclusion. There was a median of 19.0% (range, 5.5-35.4%) of the volume of ITV_10phase not enclosed by the ITV_MIP, demonstrating that the use of the MIP could result in under-treatment of disease. In contrast only a very small amount of the ITV_MIP was not enclosed by the ITV_10phase (median of 2.3%, range, 0.4-9.8%), indicating the ITV_10phase covers almost all of the tumor tissue as identified by MIP. Although there were only two Stage I patients, both demonstrated very similar ITV_10phase and ITV_MIP volumes. These findings suggest that Stage I NSCLC tumors could be outlined on the MIP alone. In Stage II and III tumors the ITV_10phase would be more reliable. To prevent under-treatment of disease, the MIP image can only be used for delineation in Stage I tumors.

  5. Towards the Establishment of Criteria for Discussing Music in Terms of Symmetry and Asymmetry (an Outline)

    Science.gov (United States)

    Csapó, Gyula

    Symmetry and asymmetry are universally present in music: our subject matter is vast, systematic applications abound. One cannot hope to do justice to this subject in an essay (only perhaps in a multi-volume book), let alone in a comprehensive manner that would include even the most important examples. The theoretical problems alone, concerning even the seemingly obvious cases, are considerable. Many of these arise from the complex, often interactive, simultaneous and temporal, i.e. multidimensional manner in which musical parameters1 behave. Thus, a rigorously systematic approach is necessary. This essay will attempt no more than to create scaffolding to facilitate future access to this subject. The bibliographical source references following the article will guide the readers to the editions of the musical examples. The terms symmetry and asymmetry (S/A for a while from here on) will be used to describe ephemeral and transitory, definitive, referential and background phenomena alike; and everything in-between. Further, S and A will be treated as a matter of degree, not as absolutes. In many instances, S/A will be thought of metaphorically or symbolically. With this caveat, many of the theoretical problems will no longer appear insurmountable. As stated before, examples of (systematic, conscious uses of) S and A in Western Art Music are universally present, all the way from Gregorian Chant to the music of Ockeghem; all the way from J.S. Bach through the Classical and Romantic eras to the increasingly conscious and mathematically ambitious applications from the Twentieth and Twenty-first Centuries (e.g. in the music of Bartók, Stravinsky, Schönberg, Webern, Boulez, Stockhausen or Xenakis). Therefore, I attempt to treat the subject by outlining the different models of how the question maybe thought of in musical terms. Specific examples will be provided to each section after the article. Although I consider these examples instructive, they by no means represent

  6. Outlines of RTE's R and D programme for 2017-2020

    International Nuclear Information System (INIS)

    2017-01-01

    RTE is publishing the outlines of its R and D programme for the 2017-2020 period. The programme is aimed at strengthening RTE's capacity for anticipating the major disruptive transformations with which it will be confronted. RTE is therefore pursuing the efforts initiated during the first roadmap over the 2013-2016 period and is embarking on new efforts. Thus, RTE's R and D efforts for the 2017-2020 period will be structured into six programmes: - The 'asset management' programme. This programme continues on with activities undertaken to reach the use phase for research initiated during the first roadmap. - The 'grid infrastructure evolution' programme. This programme continues the efforts initiated under the 'Grid of the future' programme with a reinforcement of the equipments' eco-design dimension and increased use of digital technologies to implement the equipments' control systems, protection devices and associated defence plans. - The 'environment and society' programme. This programme will be strengthened in relation to the existing programme, particularly as regards the eco-design and biodiversity dimensions. - The 'power system functioning and operation' programme. Firstly, this programme continues on from a large part of the 'Power system' programme with the dual objective of ensuring that the system remains secure with all the major physical transformations leading to a true power system 2.0 (i.e. based on power electronics) and, secondly, it aims to substantially upgrade the system's operating tools through the integration of big data processing and visualisation capabilities. - The 'optimal grid development for the energy transition' programme. This programme is aimed at rethinking grid development study methods and tools in the context of the energy, societal and digital transitions currently underway, with a view to: better integrating cross-functionality with respect to operation / maintenance and asset management / development, and to proposing the

  7. Introduction to Psychology and Leadership. Part Nine; Morale and Esprit De Corps. Content Outline, Terminal and Enabling Objectives.

    Science.gov (United States)

    Westinghouse Learning Corp., Annapolis, MD.

    The content is outlined and the terminal and enabling objectives are provided for a curriculum area on morale and esprit de corps (see EM 010 439, EM 010 440, and EM 010 461), part of an introduction to psychology and leadership course for the United States Naval Academy (see the final reports which summarize the course development project, EM 010…

  8. NEDO business outline for fiscal 1997. 18th project report meeting; 1997 nendo gyomu gaiyo. Dai 18 kai jigyo hokokukai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-22

    The projects of NEDO (New Energy and Industrial Technology Development Organization) are stated as reported at the 18th project report meeting. Outlined are new energy-related projects involving technology development, resources exploitation, promotion of new energy introduction, promotion of international cooperation, gathering of information, and so on. Outlined in relation to the research and development of industrial technologies are projects on research and development, development of medical and welfare equipment, research and development of global environment-related industrial technology, development of international industrial technology, and improvement on platforms for researches. Concerning coal, subsidy-granted projects on domestic coal and projects on domestic coal mine improvement are outlined. Projects relating to compensation for environmental pollution resulting from coal mining and those relating to alcohol production are also outlined. NEDO's financial statement for fiscal 1997 is reported. Also reported are budgets for fiscal 1998 for projects relating to new energy, research and development of industrial technology, coal mining structure coordination, compensation for environmental pollution resulting from coal mining, and alcohol production. (NEDO)

  9. NEDO business outline for fiscal 1997. 18th project report meeting; 1997 nendo gyomu gaiyo. Dai 18 kai jigyo hokokukai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-22

    The projects of NEDO (New Energy and Industrial Technology Development Organization) are stated as reported at the 18th project report meeting. Outlined are new energy-related projects involving technology development, resources exploitation, promotion of new energy introduction, promotion of international cooperation, gathering of information, and so on. Outlined in relation to the research and development of industrial technologies are projects on research and development, development of medical and welfare equipment, research and development of global environment-related industrial technology, development of international industrial technology, and improvement on platforms for researches. Concerning coal, subsidy-granted projects on domestic coal and projects on domestic coal mine improvement are outlined. Projects relating to compensation for environmental pollution resulting from coal mining and those relating to alcohol production are also outlined. NEDO's financial statement for fiscal 1997 is reported. Also reported are budgets for fiscal 1998 for projects relating to new energy, research and development of industrial technology, coal mining structure coordination, compensation for environmental pollution resulting from coal mining, and alcohol production. (NEDO)

  10. National Adult Education Programme: Policy Statement and Programme Outline. Government of India's Policy Statement on Adult Education

    Science.gov (United States)

    New Frontiers in Education, 1978

    1978-01-01

    An eight-point policy statement on adult education in India is presented, followed by an outline of operational details for putting it into effect. Focus is on combatting illiteracy by providing those citizens with skills for self-directed learning. (LBH)

  11. Citation Analysis and Histographic Outline of Scientific Output in Agriculture Using Science Citation Index (2000-2008

    Directory of Open Access Journals (Sweden)

    Mitra Pashootanizadeh

    2009-12-01

    Full Text Available The present investigation, by reviewing 22,617 records indexed between 2000 and 2008 in the Web of Science database and employing citation analysis methods attempts to identify key authors and institutes and their degree of collaboration, core journals, rate of scientific output, publishing forms and languages and leading countries in this field. It also attempts to draw a histographic outline of the agricultural science. The average annual growth in publications for the period studied was shown to be seven percent. Total of 22,617 records were presented in 15 different formats in 25 languages. 173 countries were involved. All agricultural articles retrieved from WOS had been submitted from 14,852 institutes and published in 3252 journals. 51,655 authors were identified who had cited 658381 sources. The clusters formed in the histographic outline based on LCS and GCS also included five clusters.

  12. Taxonomic differences in deciduous upper second molar crown outlines of Homo sapiens, Homo neanderthalensis and Homo erectus.

    Science.gov (United States)

    Bailey, Shara E; Benazzi, Stefano; Souday, Caroline; Astorino, Claudia; Paul, Kathleen; Hublin, Jean-Jacques

    2014-07-01

    A significant number of Middle to Late Pleistocene sites contain primarily (and sometimes only) deciduous teeth (e.g., Grotta del Cavallo, Mezmaiskaya, Blombos). Not surprisingly, there has been a recent renewed interest in deciduous dental variation, especially in the context of distinguishing Homo neanderthalensis and Homo sapiens. Most studies of the deciduous dentition of fossil hominins have focused on standard metrical variation but morphological (non-metric and morphometric) variation also promises to shed light on long standing taxonomic questions. This study examines the taxonomic significance of the crown outline of the deciduous upper second molar through principal components analysis and linear discriminant analysis. We examine whether or not the crown shape of the upper deciduous second molar separates H. neanderthalensis from H. sapiens and explore whether it can be used to correctly assign individuals to taxa. It builds on previous studies by focusing on crown rather than cervical outline and by including a large sample of geographically diverse recent human populations. Our samples include 17 H. neanderthalensis, five early H. sapiens, and 12 Upper Paleolithic H. sapiens. In addition, we include two Homo erectus specimens in order to evaluate the polarity of crown shape differences observed between H. neanderthalensis and H. sapiens. Our results show that crown outline shape discriminates H. sapiens and H. neanderthalensis quite well, but does not do well at distinguishing H. erectus from H. sapiens. We conclude that the crown outline shape observed in H. sapiens is a primitive retention and that the skewed shape observed in H. neanderthalensis is a derived condition. Finally, we explore the phylogenetic implications of the results for the H. erectus molars. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Comparison of maxillary first molar occlusal outlines of Neandertals from the Meuse River Basin of Belgium using elliptical Fourier analysis

    Directory of Open Access Journals (Sweden)

    Williams Frank L’Engle

    2017-09-01

    Full Text Available Several Neandertals derive from the karstic caves of the Meuse river tributaries of Belgium, including Engis 2, Scladina 4A-4 and Spy 1. These may form a group that is distinct in maxillary first molar occlusal outlines compared to La Quina 5 from Southwest France. Alternatively, chronological differences may separate individuals given that Scladina 4A-4 from MIS 5 is older than the others from MIS 3. Neolithic samples (n = 42 from Belgium (Maurenne Caverne de la Cave, Hastière Caverne M, Hastière Trou Garçon, Sclaigneaux and Bois Madame dated to 4.6–3.9 kyr provide a context for the Neandertals. Dental casts were prepared from dental impressions of the original maxillary molars. Crown and occlusal areas as well as mesiodistal lengths were measured by calibrated Motic 3.0 microscope cameras. Occlusal outlines of the casts were captured through photostereomicroscopy and non-landmark smooth tracing methods. Occlusal outlines were processed using elliptical Fourier analysis within SHAPE v1.3 which reduced amplitudes of the harmonics into principal components (PC axes. The first two PC axes group the Neandertals, although Scladina 4A-4 falls nearly outside the convex hull for the Neolithic sample. Neandertals are imperfectly separated from the Neolithic sample on PC3 and PC4, and completely distinct on PC5 and PC6. Scladina 4A-4 differs from the other Neandertals on most PC axes. Chronology may best explain the separation of Scladina 4A-4 from the more recent fossils, and particularly Spy 1 and La Quina 5 which are the most similar in maxillary first molar occlusal outline shape.

  14. Nitrous oxide emission from the agriculture in the Netherlands. Outline of effects of manure and ammonia measures

    International Nuclear Information System (INIS)

    Kros, J.; De Vries, W.; Oenema, O.; Velthof, G.; Kuikman, P.J.; Van Hove, B.

    2004-01-01

    By means of the model INITIATOR an integral outline was made of the effects of several measures within the framework of the manure and ammonia policy focusing on nitrous oxide emission. The results are compared with the IPCC method. The model INITIATOR is a mechanistic model by means of which the carbon cycle in the Netherlands can be differentiated on a regional scale as a function of land use, type of soil and hydrology [nl

  15. Accident at the Fukushima Dai-ichi Nuclear Power Stations of TEPCO —Outline & lessons learned—

    OpenAIRE

    TANAKA, Shun-ichi

    2012-01-01

    The severe accident that broke out at Fukushima Dai-ichi nuclear power stations on March 11, 2011, caused seemingly infinite damage to the daily life of residents. Serious and wide-spread contamination of the environment occurred due to radioactive materials discharged from nuclear power stations (NPSs). At the same time, many issues were highlighted concerning countermeasures to severe nuclear accidents. The accident is outlined, and lessons learned are extracted with respect to the safety o...

  16. HEAVEN: The head anastomosis venture Project outline for the first human head transplantation with spinal linkage (GEMINI)

    OpenAIRE

    Canavero, Sergio

    2013-01-01

    In 1970, the first cephalosomatic linkage was achieved in the monkey. However, the technology did not exist for reconnecting the spinal cord, and this line of research was no longer pursued. In this paper, an outline for the first total cephalic exchange in man is provided and spinal reconnection is described. The use of fusogens, special membrane-fusion substances, is discussed in view of the first human cord linkage. Several human diseases without cure might benefit from the procedure.

  17. A 3D Reconstruction Strategy of Vehicle Outline Based on Single-Pass Single-Polarization CSAR Data.

    Science.gov (United States)

    Leping Chen; Daoxiang An; Xiaotao Huang; Zhimin Zhou

    2017-11-01

    In the last few years, interest in circular synthetic aperture radar (CSAR) acquisitions has arisen as a consequence of the potential achievement of 3D reconstructions over 360° azimuth angle variation. In real-world scenarios, full 3D reconstructions of arbitrary targets need multi-pass data, which makes the processing complex, money-consuming, and time expending. In this paper, we propose a processing strategy for the 3D reconstruction of vehicle, which can avoid using multi-pass data by introducing a priori information of vehicle's shape. Besides, the proposed strategy just needs the single-pass single-polarization CSAR data to perform vehicle's 3D reconstruction, which makes the processing much more economic and efficient. First, an analysis of the distribution of attributed scattering centers from vehicle facet model is presented. And the analysis results show that a smooth and continuous basic outline of vehicle could be extracted from the peak curve of a noncoherent processing image. Second, the 3D location of vehicle roofline is inferred from layover with empirical insets of the basic outline. At last, the basic line and roofline of the vehicle are used to estimate the vehicle's 3D information and constitute the vehicle's 3D outline. The simulated and measured data processing results prove the correctness and effectiveness of our proposed strategy.

  18. Exploring the Solar System Activities Outline: Hands-On Planetary Science for Formal Education K-14 and Informal Settings

    Science.gov (United States)

    Allen, J. S.; Tobola, K. W.; Lindstrom, M. L.

    2003-01-01

    Activities by NASA scientists and teachers focus on integrating Planetary Science activities with existing Earth science, math, and language arts curriculum. The wealth of activities that highlight missions and research pertaining to the exploring the solar system allows educators to choose activities that fit a particular concept or theme within their curriculum. Most of the activities use simple, inexpensive techniques that help students understand the how and why of what scientists are learning about comets, asteroids, meteorites, moons and planets. With these NASA developed activities students experience recent mission information about our solar system such as Mars geology and the search for life using Mars meteorites and robotic data. The Johnson Space Center ARES Education team has compiled a variety of NASA solar system activities to produce an annotated thematic outline useful to classroom educators and informal educators as they teach space science. An important aspect of the outline annotation is that it highlights appropriate science content information and key science and math concepts so educators can easily identify activities that will enhance curriculum development. The outline contains URLs for the activities and NASA educator guides as well as links to NASA mission science and technology. In the informal setting educators can use solar system exploration activities to reinforce learning in association with thematic displays, planetarium programs, youth group gatherings, or community events. Within formal education at the primary level some of the activities are appropriately designed to excite interest and arouse curiosity. Middle school educators will find activities that enhance thematic science and encourage students to think about the scientific process of investigation. Some of the activities offered are appropriate for the upper levels of high school and early college in that they require students to use and analyze data.

  19. Outline of design and construction work related to the installation of freshwater storage tank at Higashidori Nuclear Power Station

    International Nuclear Information System (INIS)

    Ozaki, Mitsuhiro; Yamaguchi, Kazuhide; Suzuki, Takeshi

    2017-01-01

    Tohoku Electric Power Co., Ltd., at its Higashidori Nuclear Power Station, is promoting the installation of safety measure facilities as an effort to restart the operation. It is implementing a freshwater storage tank installation work to secure core cooling function at the time of severe accident occurrence. Construction started in June 2014, drilling and construction of the framework have advanced while paying due attention to quality assurance, and affiliated facilities are currently under construction. This paper reports the outline of planning, design, and construction work of this project. (A.O.)

  20. NLM's Medical Library Resource Improvement Grant for Consortia Development: a proposed outline to simplify the application process.

    Science.gov (United States)

    Kabler, A W

    1980-01-01

    The National Library of Medicine's Resource Improvement Grant for Consortia is available to assist with developing hospital library consortia, and to support the development of basic healthy information collections. In an effort to simplify the grant application process, this paper presents suggestions for writing the narrative section of the first budget-period application, using the outline in NLM's Application Instructions for Consortium Applicants. Suggestions for writing the narratives of the second budget-period application and the collection development application are also included.

  1. Risks of fracture of Björk-Shiley 60 degree convexo-concave prosthetic heart valves: long-term cohort follow up in the UK, Netherlands and USA.

    Science.gov (United States)

    Blot, W J; Omar, R Z; Kallewaard, M; Morton, L S; Fryzek, J P; Ibrahim, M A; Acheson, D; Taylor, K M; van der Graaf, Y

    2001-03-01

    Approximately 82,000 Björk-Shiley convexo-concave (BSCC) 60 degree prosthetic heart valves were implanted in patients worldwide between 1979 and 1986. Outlet strut fractures (OSF) of some of the valves were first reported shortly after their introduction. Here, the determinants of OSF are examined, and the between-country variation and long-term risk are assessed. Cohorts of patients in the UK, Netherlands and USA with 15,770 BSCC 60 degree heart valves were followed up to 18 years for the occurrence of OSF. Crude rates of OSF were highest in the UK (0.18% per year), intermediate in the Netherlands (0.13%), and lowest in the USA (0.06%), although risk factor adjustment reduced the inter-country differences. Furthermore, in the UK and Netherlands, OSF rates (particularly for mitral valves) declined with time since implantation, and between-country differences were considerably diminished 10 or more years post implantation. The risk of OSF decreased steadily with advancing patient age. Fracture rates were lower among women than men, and also varied significantly with valve size and position and OSF status of other valves in the same shoporder. This long-term follow up of BSCC 60 degree heart valve patients indicates that risk factors for valve fracture are generally similar in the UK, Netherlands and USA. It also identifies a strong association between fracture risk and age, newly reveals gender-related differences, and shows that the risk of valve fracture persisted, albeit at a reduced rate, into the 1990s.

  2. Compulsive buying in outline.

    Science.gov (United States)

    Zadka, Łukasz; Olajossy, Marcin

    2016-01-01

    In spite of a hundred year long history of scientific research compulsive buying has been a hardly known phenomenon until today. Ambiguous scientific information makes it impossible to classify compulsive buying as a separate mental disorder. Recently many researchers have noticed phenomenological compatibility of compulsive buying with behavioural addictions. Nowadays, there is reasonable grounds that compulsive buying disorder can be defined as an addiction. There are many similarities occurring between a consumer type behaviours in compulsive buyers and a pathologic consumption of psychoactive substances which included the obsessive need to consumer or a compulsion to consume, personal dependence and loss of control over self-behaviour, as well as tendencies to the consumption increase. Compulsive buying disorder differs in its course from the compulsive behaviours. A strong compulsion to make a given activity, often impossible to restrain is associated with overwhelming but acceptable desire to purchase a specific item. Due to the latest information about the described phenomenon, it has been decided to present current knowledge of adequate classifications, epidemiology and therapy of compulsive buyers. In the article authors' own standpoint as regards pathogenesis and potential risk factors was described.

  3. Outlines of environmental Law

    International Nuclear Information System (INIS)

    Salzwedel, J.

    1982-01-01

    In this omnibus, ten members of the working group for environmental law attempt to present the respective fields of environmental law in a consistent context, and to show the autonomy of each subject-matter as well as their interdependence and interrelationships. In the long run, the complexity of basic facts of natural science, technology and that of practical execution will require subject-specific penetration and application. Relationships between systems have to be realized to an increasing extent. Structures of law and administration have to be harmonized, and statements on the environmental impact of projects have to be made possible on the whole. Fundamental issues of environmental law are dealt with in the chapters entitled 'Concept and levels of applications of environmental law' and 'Environmental law in general'. The international, supranational and constitutional conditions given in advance of any environmental legislation increasingly gaining in importance are presented in the chapter on 'International environmental law', 'Basics of European Law' and on 'Constitutional Fundamentals'. The necessity of interdisciplinary cooperation becomes evident in those contributions concerning individual fields of environmental law. (orig./HSCH) [de

  4. Compulsive buying in outline

    OpenAIRE

    Łukasz Zadka; Marcin Olajossy

    2016-01-01

    In spite of a hundred year long history of scientific research compulsive buying has been a hardly known phenomenon until today. Ambiguous scientific information makes it impossible to classify compulsive buying as a separate mental disorder. Recently many researchers have noticed phenomenological compatibility of compulsive buying with behavioural addictions. Nowadays, there is reasonable grounds that compulsive buying disorder can be defined as an addiction. There are many similarities occu...

  5. Polish polar research (outline

    Directory of Open Access Journals (Sweden)

    Krzysztof Ludwik Birkenmajer

    2017-12-01

    Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

  6. Winnicott's paradigm outlined

    Directory of Open Access Journals (Sweden)

    Zeljko Loparic

    Full Text Available The main objective of this paper is to present a unified view of Winnicott’s contribution to psychoanalysis. Part I (Sections 1-4 starts off by recalling that, according to some important commentators, Winnicott introduced a change in paradigms in psychoanalysis. In order to show that this change can be viewed as an overall “switch in paradigms”, in the sense given by T. S. Kuhn, this paper presents an account of the Kuhn’s view of science and offers a reconstruction of Freud’s Oedipal, Triangular or “Toddler-in-the-Mother’s-Bed” Paradigm. Part II (Sections 5-13 shows that as early as the 1920’s Winnicott encountered insurmountable anomalies in the Oedipal paradigm and, for that reason, started what can be called revolutionary research for a new framework of psychoanalysis. This research led Winnicott, especially during the last period of his life, to produce an alternative dual or “Baby-on-the-Mother’s-Lap” Paradigm. This new paradigm is described in some detail, especially the paradigmatic dual mother-baby relation and Winnicott’s dominant theory of maturation. Final remarks are made regarding Winnicott’s heritage and the future of psychoanalysis.

  7. Outline of NUCEF facility

    International Nuclear Information System (INIS)

    Takeshita, Isao

    1996-01-01

    NUCEF is a multipurpose research facility in the field of safety and advanced technology of nuclear fuel cycle back-end. Various experiment facilities and its supporting installations, in which nuclear fuel materials, radio isotopes and TRU elements can be handled, are arranged in more than one hundred rooms of two experiment buildings. Its construction was completed in middle of 1994 and hot experiments have been started since then. NUCEF is located on the site (30,000 m 2 ) of southeastern part in the Tokai Research Establishment of JAERI facing to the Pacific Ocean. The base of Experiment Buildings A and B was directly founded on the rock existing at 10-15 m below ground level taking the aseismatic design into consideration. Each building is almost same sized and composed of one basement and three floors of which area is 17,500 m 2 in total. In the basement, there are exhaust facilities of ventilation system, treatment system of solution fuel and radioactive waste solution and storage tanks of them. Major experiment facilities are located on the first or the second floors in each building. An air-inlet facility of ventilation system for each building is equipped on the third floor. Most of experiment facilities for criticality safety research including two critical facilities: Static Experiment Critical Facility (STACY) and Transient Experiment Critical Facility (TRACY) are installed in Experiment Building A. Experiment equipments for research on advanced fuel reprocessing process and on TRU waste management, which are named BECKY (Back End Fuel Cycle Key Elements Research Facility), are installed in laboratories and a-g cells in Experiment Building B. (J.P.N.)

  8. Reagan outlines nonproliferation policy

    International Nuclear Information System (INIS)

    Walsh, J.

    1981-01-01

    The Reagan Administration wants to shift from efforts to impose direct control over the fuel cycle and nuclear technology to a framework based on cooperation and initiatives for greater political stability. A nuclear-free zone for the Middle East is one area to explore. Congress responded to this announced plan with a counter move to tighten non-proliferation strategies. Reagan's policy will be to restore the US as an aggressive, but reliable nuclear trading partner operating under adequate safeguards. Critics find this approach dangerous and contradictory. The policy is still too general to answer specific questions about bilateral arrangements, generic permits, plutonium recycling, and other matters

  9. Schaum's outline of calculus

    CERN Document Server

    Ayres, Frank

    1999-01-01

    Students can gain a thorough understanding of differential and integral calculus with this powerful study tool. They'll also find the related analytic geometry much easier. The clear review of algebra and geometry in this edition will make calculus easier for students who wish to strengthen their knowledge in these areas. Updated to meet the emphasis in current courses, this new edition of a popular guide­­--more than 104,000 copies were bought of the prior edition--­­includes problems and examples using graphing calculators.

  10. Allegheny County Parks Outlines

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Shows the size and shape of the nine Allegheny County parks. If viewing this description on the Western Pennsylvania Regional Data Center’s open data portal...

  11. Outline of geothermal energy research and development in fiscal 1999; Heisei 11 nendo chinetsu enerugi kenkyu kaihatsu no gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    Konishi, T. [Agency of Industrial Science and Tehcnology, Tokyo (Japan)

    1999-11-18

    In this paper, the outline of the budget of geothermal energy relation in fiscal 1999, the system of research and development and the outline of research and development are described. Budgets in fiscal 1999 are the general account 17 million yen, the power development special account 3,222 million yen, sum total 323,900 million yen and it is a 33 million yen decrease compared with the preceding year. Within research and development, the following are included as a survey investigation research; a geothermal energy survey and picking technology, a verification investigation of a geothermal energy exploration technique, a deep geothermal resource investigation and an analysis and evaluation therefor. As a development of geothermal energy power plants using hot water, the following are included; development of the 10 MW binary cycle power generation plant, development of the bottom hole information system (MWD) in geothermal well drilling, technology development of the geothermal hot dry rock source system. As an analysis and evaluation of the bottom hole information detection system in geothermal well drilling, the following are included; an analysis and evaluation of the hot dry rock thermal extraction system, an analysis and evaluation of the deep geothermal resources picking technology, an analysis and evaluation of metallic materials for the geothermal deep direction and an analysis and evaluation of high polymer materials for the geothermal deep direction. (NEDO)

  12. An outline of the methods which will be used to evaluate shutdown margins, control rod worth and local criticality problems for the HTR - power reactors

    Energy Technology Data Exchange (ETDEWEB)

    Dworak, A

    1971-09-28

    The methods to calculate control rod efficiency outlined in this paper were the results of an investigation carried out by A. Dworak and C. Hunt on the Dragon Charge I Core 1. There the theoretical results agreed very good with the experimental measurements. This paper gives a brief outline of the methods in question and summarizes the calculations done up to now.

  13. Monotonicity and concavity in Coulomb systems

    International Nuclear Information System (INIS)

    Englisch, R.; Englisch, H.; Karl-Marx-Universitaet, Leipzig

    1986-01-01

    The eigenvalues of H(α) = H 0 + αH * , where H * is an arbitrary Coulomb potential, decrease with increasing α ≥ 0. Linear and parabolic bounds for the ground state energy are presented. These bounds are applied to the biexciton and the exciton at a neutral donor. (orig.)

  14. On the concavity of delivery games

    NARCIS (Netherlands)

    Hamers, H.J.M.

    1995-01-01

    Delivery games, introduced by Hamers, Borm, van de Leensel and Tijs (1994), are combinatorial optimization games that arise from delivery problems closely related to the Chinese postman problem (CPP). They showed that delivery games are not necessarily balanced. For delivery problems corresponding

  15. Calculated Communications In A Concave World

    Science.gov (United States)

    2016-02-16

    mayhem of the crowded market that they just destroyed with several remotely-detonated IEDs. As they jostle along the treacherous terrain in a half...1.49 billion users • Tablet – 1 billion owners • LinkedIn – 380 million users • Twitter – 304 million users • Instagram – 300 million users...a proactive system versus a reactive one. Developing technologically agile systems has already been accomplished commercially and market economics

  16. Accident at the Fukushima Dai-ichi Nuclear Power Stations of TEPCO —Outline & lessons learned—

    Science.gov (United States)

    TANAKA, Shun-ichi

    2012-01-01

    The severe accident that broke out at Fukushima Dai-ichi nuclear power stations on March 11, 2011, caused seemingly infinite damage to the daily life of residents. Serious and wide-spread contamination of the environment occurred due to radioactive materials discharged from nuclear power stations (NPSs). At the same time, many issues were highlighted concerning countermeasures to severe nuclear accidents. The accident is outlined, and lessons learned are extracted with respect to the safety of NPSs, as well as radiation protection of residents under the emergency involving the accident. The materials of the current paper are those released by governmental agencies, academic societies, interim reports of committees under the government, and others. PMID:23138450

  17. Influence of the DSM-IV Outline for Cultural Formulation on multidisciplinary case conferences in mental health.

    Science.gov (United States)

    Dinh, Nathalie M H; Groleau, Danielle; Kirmayer, Laurence J; Rodriguez, Charo; Bibeau, Gilles

    2012-01-01

    The Diagnostic and Statistical Manual of Mental Disorders of the American Psychiatric Association (DSM-IV-TR) includes an Outline for Cultural Formulation (CF) that identifies cultural information that can be used to modify diagnosis, clinical assessment and treatment plan. This study examined the use of the CF by a Cultural Consultation Service in the psychiatric assessment of patients referred by primary care providers. The study uses conversation analysis of 12 clinical case conferences to explore the ways in which the CF influenced the interaction of a multidisciplinary group of mental health professionals in conceptualizing the implications of patients' cultural background and current context for diagnosis and treatment planning. The results suggest that the CF can be a useful tool for interdisciplinary collaboration and knowledge transfer by providing a framework to systematically introduce different disciplinary perspectives and levels of description that transcend the narrow frame of disorder-centred psychiatric diagnosis, assessment and care.

  18. Report on research outline in 1999 fiscal year on public collection type research of nuclear fuel cycle.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The Japan Nuclear Cycle Development Institute (JNC) initiated a system to promote the public collection type researches of nuclear fuel cycle since 1999, in order to intend to promote collaboration with universities and research institutes. The system aims to intend to activate researching environment in JNC by intercourse, information exchange, publication of results and so on between researchers in and out of JNC, effectively to proceed basic and fundamental R and D. Here were outlined on eleven researching theme, such as upgrading of velocity and temperature measurement of non-contact type fluid by using electromagnetic ultrasonic wave, development of temperature history memory elements for radiation environment test of a fast breeder reactor, direct glassification of salt wastes by using oxygen plasma, a method on dissolving extraction of metal oxides by using a super-critical fluid, creation of highly separable materials by assistance of computational chemistry (aiming at high order processing of high level radioactive wastes), and so on. (G.K.)

  19. Towards sustainability: An interoperability outline for a Regional ARC based infrastructure in the WLCG and EGEE infrastructures

    International Nuclear Information System (INIS)

    Field, L; Gronager, M; Johansson, D; Kleist, J

    2010-01-01

    Interoperability of grid infrastructures is becoming increasingly important in the emergence of large scale grid infrastructures based on national and regional initiatives. To achieve interoperability of grid infrastructures adaptions and bridging of many different systems and services needs to be tackled. A grid infrastructure offers services for authentication, authorization, accounting, monitoring, operation besides from the services for handling and data and computations. This paper presents an outline of the work done to integrate the Nordic Tier-1 and 2s, which for the compute part is based on the ARC middleware, into the WLCG grid infrastructure co-operated by the EGEE project. Especially, a throughout description of integration of the compute services is presented.

  20. Outline of a method for final storage of low- and medium-active waste from possible Danish power reactors

    International Nuclear Information System (INIS)

    Brodersen, K.; Jensen, J.; Oestergaard, K.

    1977-02-01

    A method is outlined for the final storage of Danish low-and medium-active power reactor waste. The waste drums are contained in large concretre blocks placed just below the ground surface. A plant for storing waste by means of this method is sketched. It consists of a system of reinforced concrete pits with the top level with the ground surface. Each pit measures c. 5 x 5 m and is c. 6 m deep. The pits are envisaged cast with a permanent inside, step-like shuttering of thin steel plates. The volume between the drums will be cast with concrete when a pit is filled. Calculations are given of the construction and running costs. It is estimated that the final storage of reactor wastes is only a small problem regarding economy and space, and also that there is hardly doubt that full safety can be achieved. (B.P.)

  1. Sewerage Mapping and Information System of the Metropolis of Tokyo (SEMIS) : Details of the Development and Outline of the System

    Science.gov (United States)

    Kawakami, Kouichi; Sekita, Mitsunobu

    It is essential to manage sewerage ledgers as information when maintaining and controlling sewerage, one of the infrastructures of cities. The Bureau of Sewerage developed the full scale Sewerage Mapping and Information System (SEMIS), the first trial done by a local government in this country and has operated it since 1985. Before the development the questionnaires were conducted to survey the use of sewerage ledgers by staffs engaged in sewage works, and means of improving how to prepare plans of sewerage were considered based on them. Employing these means the Bureau made a database of plans and descriptions which comprise sewerage ledgers, and then constructed the computer system which manages it comprehensively. The details of the development and the system outline are described.

  2. Outline of an ultracorrector compensating for all primary chromatic and geometrical aberrations of charged-particle lenses

    International Nuclear Information System (INIS)

    Rose, Harald

    2004-01-01

    A novel ultracorrector is outlined which compensates for the primary and secondary first-order chromatic aberrations and all third-order geometrical aberrations of electron optical systems with a straight axis. Owing to the imposed symmetry conditions on the fields and the paraxial fundamental rays, the corrector does not introduce aberrations with 2-fold symmetry. The chromatic aberrations are corrected by means of crossed electric magnetic quadrupoles while the third-order geometrical aberrations are eliminated by octopoles. By placing these elements at distinct positions within the corrector, it is possible to successively eliminate the third-order aberrations in such a way that each subsequent correction does not affect the aberrations corrected in the preceding correction steps

  3. Using the example of Istanbul to outline general aspects of protecting reservoirs, rivers and lakes used for drinking water abstraction.

    Science.gov (United States)

    Tanik, A

    2000-01-01

    The six main drinking water reservoirs of Istanbul are under the threat of pollution due to rapid population increase, unplanned urbanisation and insufficient infrastructure. In contrast to the present land use profile, the environmental evaluation of the catchment areas reveals that point sources of pollutants, especially of domestic origin, dominate over those from diffuse sources. The water quality studies also support these findings, emphasising that if no substantial precautions are taken, there will be no possibility of obtaining drinking water from them. In this paper, under the light of the present status of the reservoirs, possible and probable short- and long-term protective measures are outlined for reducing the impact of point sources. Immediate precautions mostly depend on reducing the pollution arising from the existing settlements. Long-term measures mainly emphasise the preparation of new land use plans taking into consideration the protection of unoccupied lands. Recommendations on protection and control of the reservoirs are stated.

  4. Report on research outline in 1999 fiscal year on public collection type research of nuclear fuel cycle

    International Nuclear Information System (INIS)

    2000-07-01

    The Japan Nuclear Cycle Development Institute (JNC) initiated a system to promote the public collection type researches of nuclear fuel cycle since 1999, in order to intend to promote collaboration with universities and research institutes. The system aims to intend to activate researching environment in JNC by intercourse, information exchange, publication of results and so on between researchers in and out of JNC, effectively to proceed basic and fundamental R and D. Here were outlined on eleven researching theme, such as upgrading of velocity and temperature measurement of non-contact type fluid by using electromagnetic ultrasonic wave, development of temperature history memory elements for radiation environment test of a fast breeder reactor, direct glassification of salt wastes by using oxygen plasma, a method on dissolving extraction of metal oxides by using a super-critical fluid, creation of highly separable materials by assistance of computational chemistry (aiming at high order processing of high level radioactive wastes), and so on. (G.K.)

  5. Effect of Instrument Design and Access Outlines on the Removal of Root Canal Obturation Materials in Oval-shaped Canals.

    Science.gov (United States)

    Niemi, Tuomas K; Marchesan, Melissa A; Lloyd, Adam; Seltzer, Robert J

    2016-10-01

    The aim of this study was to compare the effectiveness of TRUShape (TS) instruments with ProFile Vortex Blue (VB) instruments for the removal of obturation materials during retreatment of single-canal mandibular premolars performed through 2 access outlines. Initial root canal treatment was completed through a contracted endodontic cavity (CEC) design. Canals were instrumented to an F2 ProTaper instrument, obturated with warm lateral condensation of gutta-percha with AH Plus sealer, and allowed to set for 30 days at 37°C and 100% humidity. For retreatment, specimens were divided into 2 groups (n = 24) on the basis of access outline, CEC or traditional endodontic cavity (TEC). Retreatment was initiated by using ProTaper Retreatment instruments (D1-D3). Specimens were then stratified, further divided (n = 12), and reinstrumented up to TS 40 .06v or 40 .06 VB. Irrigation was performed by using 8.25% NaOCl and QMix 2in1. Retreatment time was recorded. Teeth were sectioned and photographed, and the percentage of remaining obturation materials was measured. Data were analyzed with Kruskal-Wallis analysis of variance for two-factor tests (α canal surface when compared with TEC-VB, CEC-TS, and TEC-TS (P ≤ .05). None of these other combinations were different from each other (P > .05). Significantly more time was required for retreatment with CEC-TS (27.68 ± 1.4 minutes) than the other groups (P root canal surface of mandibular premolars. However, in the presence of a CEC access design, using TS instruments removed more obturating material in single-rooted, oval-shaped canals. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  6. The Concave Shape of the Forced Expiratory Flow-Volume Curve in 3 Seconds Is a Practical Surrogate of FEV1/FVC for the Diagnosis of Airway Limitation in Inadequate Spirometry.

    Science.gov (United States)

    Li, Hao; Liu, Chunhong; Zhang, Yi; Xiao, Wei

    2017-03-01

    Spirometry is important for the differential diagnosis of dyspnea. However, some patients cannot exhale for ≥6 s to achieve the American Thoracic Society/European Respiratory Society criteria. The aim of this study was to demonstrate the reliability of a new parameter that quantifies the degree of concavity in the first 3 s to define airway limitation as a surrogate for the FEV 1 /FVC. Four hundred spirometry test results were selected through complete random sampling. The new parameter, termed the AUC 3 /AT 3 , was calculated as the area under the descending limb of the expiratory flow-volume curve before the end of the first 3 s (AUC 3 ) divided by the area of the triangle before the end of the first 3 s (AT 3 ). The AUC 3 /AT 3 was compared with the FEV 1 /FVC using Pearson's correlation analysis. The level of agreement between the AUC 3 /AT 3 and the FEV 1 /FVC in the detection of airway obstruction was analyzed using the kappa statistic. We also compared the diagnostic accuracy of the new index with that of the FEV 1 /forced expiratory volume in the first 3 s (FEV 3 ). There was a strong correlation (r = 0.88, P < .001) between the AUC 3 /AT 3 and the FEV 1 /FVC. There was also strong agreement between the AUC 3 /AT 3 and the FEV 1 /FVC in the detection of obstruction with kappa indices of 0.72 (Global Initiative for Chronic Obstructive Lung Disease [GOLD] criterion) and 0.67 (lower limit of normal criterion), and these values were greater than those obtained for the FEV 1 /FEV 3 . The AUC 3 /AT 3 also exhibited acceptable sensitivity, specificity, positive predictive value, and negative predictive value. The diagnostic accuracies of the AUC 3 /AT 3 were 86.3% (GOLD criterion) and 83.8% (lower limit of normal criterion), which were greater than the 76.0 and 74.0% obtained for the FEV 1 /FEV 3 , respectively. The AUC 3 /AT 3 can be utilized as a surrogate parameter for the FEV 1 /FVC when patients cannot complete a 6-s expiratory effort. Additionally, the

  7. Appraisal of the correspondence of the safety improvement measures proposed for the Mochovce NPP with respect to the ones outlined in the TEO for the Juragua NPP

    International Nuclear Information System (INIS)

    Pereira Hernandez, Guillermo

    1996-01-01

    The work accomplished consisted in determining the correspondence or relationship between the safety improvement measures of the outlined for both plants as well as a preliminary analysis from which were determined. The measures which a deeper analysis is recommended to evaluate theirs possible addition to the group it is recommended to deepen with a view to take into considerations aspects of interest that in them are outlined and which could serve to enhance the approach or the linkage of the measures outlined in the TEO

  8. Incineration experiences at the Tsuruga P.S. and outline of the advanced type incineration system at the Tokai No. 2 P.S

    International Nuclear Information System (INIS)

    Yui, K.; Kurihara, Y.; Inoue, S.; Takamori, H.; Karita, Y.

    1987-01-01

    In 1978, the first radwaste incineration plant among Japanese nuclear power stations started its operation at Tsuruga P.S., and the first advanced radwaste incineration plant has been constructed and accomplished the test operation in September 1986. This paper describes the outline of Tsuruga incineration plant and its operation achievements, and the outline of advanced incineration technology, Tokai No. 2 incineration plant and its test operation results

  9. Comparison of the Full Outline of UnResponsiveness score and the Glasgow Coma Scale in predicting mortality in critically ill patients*.

    Science.gov (United States)

    Wijdicks, Eelco F M; Kramer, Andrew A; Rohs, Thomas; Hanna, Susan; Sadaka, Farid; O'Brien, Jacklyn; Bible, Shonna; Dickess, Stacy M; Foss, Michelle

    2015-02-01

    Impaired consciousness has been incorporated in prediction models that are used in the ICU. The Glasgow Coma Scale has value but is incomplete and cannot be assessed in intubated patients accurately. The Full Outline of UnResponsiveness score may be a better predictor of mortality in critically ill patients. Thirteen ICUs at five U.S. hospitals. One thousand six hundred ninety-five consecutive unselected ICU admissions during a six-month period in 2012. Glasgow Coma Scale and Full Outline of UnResponsiveness score were recorded within 1 hour of admission. Baseline characteristics and physiologic components of the Acute Physiology and Chronic Health Evaluation system, as well as mortality were linked to Glasgow Coma Scale/Full Outline of UnResponsiveness score information. None. We recruited 1,695 critically ill patients, of which 1,645 with complete data could be linked to data in the Acute Physiology and Chronic Health Evaluation system. The area under the receiver operating characteristic curve of predicting ICU mortality using the Glasgow Coma Scale was 0.715 (95% CI, 0.663-0.768) and using the Full Outline of UnResponsiveness score was 0.742 (95% CI, 0.694-0.790), statistically different (p = 0.001). A similar but nonsignificant difference was found for predicting hospital mortality (p = 0.078). The respiratory and brainstem reflex components of the Full Outline of UnResponsiveness score showed a much wider range of mortality than the verbal component of Glasgow Coma Scale. In multivariable models, the Full Outline of UnResponsiveness score was more useful than the Glasgow Coma Scale for predicting mortality. The Full Outline of UnResponsiveness score might be a better prognostic tool of ICU mortality than the Glasgow Coma Scale in critically ill patients, most likely a result of incorporating brainstem reflexes and respiration into the Full Outline of UnResponsiveness score.

  10. Predictive Value of Glasgow Coma Score and Full Outline of Unresponsiveness Score on the Outcome of Multiple Trauma Patients.

    Science.gov (United States)

    Baratloo, Alireza; Shokravi, Masumeh; Safari, Saeed; Aziz, Awat Kamal

    2016-03-01

    The Full Outline of Unresponsiveness (FOUR) score was developed to compensate for the limitations of Glasgow coma score (GCS) in recent years. This study aimed to assess the predictive value of GCS and FOUR score on the outcome of multiple trauma patients admitted to the emergency department. The present prospective cross-sectional study was conducted on multiple trauma patients admitted to the emergency department. GCS and FOUR scores were evaluated at the time of admission and at the sixth and twelfth hours after admission. Then the receiver operating characteristic (ROC) curve, sensitivity, specificity, as well as positive and negative predictive value of GCS and FOUR score were evaluated to predict patients' outcome. Patients' outcome was divided into discharge with and without a medical injury (motor deficit, coma or death). Finally, 89 patients were studied. Sensitivity and specificity of GCS in predicting adverse outcome (motor deficit, coma or death) were 84.2% and 88.6% at the time of admission, 89.5% and 95.4% at the sixth hour and 89.5% and 91.5% at the twelfth hour, respectively. These values for the FOUR score were 86.9% and 88.4% at the time of admission, 89.5% and 100% at the sixth hour and 89.5% and 94.4% at the twelfth hour, respectively. Findings of this study indicate that the predictive value of FOUR score and GCS on the outcome of multiple trauma patients admitted to the emergency department is similar.

  11. Development of dual-purpose metal cask for interim storage of spent nuclear fuel (1). Outline of cask structure

    International Nuclear Information System (INIS)

    Shimizu, Masashi; Hayashi, Makoto; Kashiwakura, Jun

    2003-01-01

    Spent fuels discharged from nuclear power plants in Japan are planed to be reprocessed at the nuclear fuel recycle plant under construction at Rokkasho-mura. Since the amount of the spent fuels exceeds that of recycled fuel, the spent fuels have to be properly stored and maintained as recycle fuel resource until the beginning of the reprocessing. For that sake, interim storage installations are being constructed outside the nuclear power plants by 2010. The storage dry casks have been practically used as the interim storage in the nuclear power plants. From this reason, the storage system using the storage dry casks is promising as the interim storage installations away form the reactors, which are under discussion. In the interim storage facilities, the storage using the dry cask of the storage metal cask with business showings, having the function of transportation is now under discussion. By employing transportation and storage dual-purpose cask, the repack equipments can be exhausted, and the reliability of the interim storage installations can be increased. Hitachi, Ltd. has been developing the high reliable and economical transportation and storage dry metal cask. In this report, the outline of our developing transportation and storage dry cask is described. (author)

  12. Outline of the results of test and research at expense of entrusting research on atomic energy peaceful utilization, 1980

    International Nuclear Information System (INIS)

    1982-03-01

    The test research on the substances promoting the recovery from radiation injuries, the research on the security of the facilities using radioisotopes in earthquakes, the test research on the distribution and behavior of radioactive nuclides in environment for the evaluation of exposure dose, the test research on the rate of scattering of RIs, the measurement and dose evaluation of gaseous radioactive nuclides, the research on the measuring techniques for medium and high concentration gaseous tritium, the test research on the evaluation of the effect of low dose radiation on living things, the epidemiological research on low dose effect, the research on the genetic safety of irradiated foods, the test research on the development of radiation sensitizers to cancer cells, the research on the automation and acceleration of the production of short life RI-labeled compounds, the test research on the safety of high performance air filters for nuclear fuel facilities, the test research on the evaluation of the impact properties of nuclear fuel-transporting casks loaded on vehicles, the research on the application of improved security measures to large scale reprocessing facilities, and the test research on the protection capability of countercollision structures for nuclear ships are outlined. (Kako, I.)

  13. Outline of sodium-water reaction test in case of large leak with SWAT-3 testing equipments

    International Nuclear Information System (INIS)

    Sato, Minoru

    1978-01-01

    The key component in sodium-cooled fast reactors in steam generators, and the sodium-water reaction owing to the break of heating tubes may cause serious damages in equipments and pipings. The main factor controlling this phenomenon is the rate of leak of water. When the rate of water leak is small, the propagation of heating tube breaking may occur owing to ''wastage phenomenon'', on the other hand, when the rate of water leak is large, the phenomena of explosive pressure and flow occur due to the reaction heat and a large quantity of hydrogen generated by the reaction. In PNC, the testing equipments of SWAT-2 for small water leak and SWAT-1 for large leak were constructed, and the development test has been carried out to establish the method of safety design experimentally. The synthetic test equipment for the safety of steam generators, SWAT-3, was constructed to carry out the large water leak test in the scale close to actual plants. The object of the test, the outline of the test equipment, the phenomena of pressure and flow in the water injection test, the confirmation of the occurrence of secondary breaking of adjacent heating tubes, and the disposal of reaction products are described in this paper. This test is till going on, and the final conclusion will be reported later. (Kako, I.)

  14. Reframing political violence and mental health outcomes: outlining a research and action agenda for Latin America and the Caribbean region

    Directory of Open Access Journals (Sweden)

    Duncan Pedersen

    Full Text Available In recent decades, the number of people exposed to traumatic events has significantly increased as various forms of violence, including war and political upheaval, engulf civilian populations worldwide. In spite of widespread armed conflict, guerrilla warfare and political violence in the Latin American and Caribbean region, insufficient attention had been paid in assessing the medium and long-term psychological impact and additional burden of disease, death, and disability caused by violence and wars amongst civilian populations. Following a review of the literature, a few central questions are raised: What is the short, medium and long-term health impact of extreme and sustained forms of violence in a given population? How political violence is linked to poor mental health outcomes at the individual and collective levels? Are trauma-related disorders, universal outcomes of extreme and sustained violence? These questions lead us to reframe the analysis of political violence and mental health outcomes, and reexamine the notions of trauma, after which a research and action agenda for the region is outlined. In the concluding sections, some basic principles that may prove useful when designing psychosocial interventions in post-conflict situations are reviewed.

  15. A seismic refraction experiment in 2000 on the Mizuho Plateau, East Antarctica (JARE-41 -Outline of observations-

    Directory of Open Access Journals (Sweden)

    Hiroki Miyamachi

    2001-03-01

    Full Text Available A seismic refraction experiment was successfully conducted along the S17-Z20 profile on the Mizuho route, in East Antarctica, in the austral summer season of 1999-2000 (JARE-41. One hundred sixty seismic stations were temporarily installed along the profile about 180km long and five large shots with dynamite of about 600kg were fired. In addition, two shots with charge sizes of 250kg and 25kg were arranged along the profile. The obtained seismic records show the clear onsets of the first arrivals in a distance range of less than 100km from each large shot. In particular, seismic waves traveling through the ice sheet and the dispersed surface waves are distinctly observed. Some later phases are also detected. The first travel time data obtained show that a P-wave velocity in the ice sheet is 3.6-3.8km/s and an apparent velocity in the rock basement just beneath the ice sheet is almost 6.2km/s. This report describes the basic outline of the experiment and the seismic data obtained.

  16. Model curriculum outline for Alternatively Fueled Vehicle (AFV) automotive technician training in light and medium duty CNG and LPG

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This model curriculum outline was developed using a turbo-DACUM (Developing a Curriculum) process which utilizes practicing experts to undertake a comprehensive job and task analysis. The job and task analysis serves to establish current baseline data accurately and to improve both the process and the product of the job through constant and continuous improvement of training. The DACUM process is based on the following assumptions: (1) Expert workers are the best source for task analysis. (2) Any occupation can be described effectively in terms of tasks. (3) All tasks imply knowledge, skills, and attitudes/values. A DACUM panel, comprised of six experienced and knowledgeable technicians who are presently working in the field, was given an orientation to the DACUM process. The panel then identified, verified, and sequenced all the necessary job duty areas and tasks. The broad duty categories were rated according to relative importance and assigned percentage ratings in priority order. The panel then rated every task for each of the duties on a scale of 1 to 3. A rating of 3 indicates an {open_quotes}essential{close_quotes} task, a rating of 2 indicates an {open_quotes}important{close_quotes} task, and a rating of 1 indicates a {open_quotes}desirable{close_quotes} task.

  17. Nurses' Time Use in Forensic Psychiatry: Core Interventions Outlined in the Finnish Clinical Practice Guideline on Schizophrenia.

    Science.gov (United States)

    Tenkanen, Helena; Taskinen, Helena; Kontio, Raija; Repo-Tiihonen, Eila; Tiihonen, Jari; Kinnunen, Juha

    2016-01-01

    Forensic psychiatric nurses are key in implementing the core interventions outlined in the clinical practice guideline on schizophrenia. This study endeavors to ascertain how these were implemented in routine practice in forensic psychiatry by measuring how nurses use their time. Data were collected from registered nurses and practical mental nurses in all forensic psychiatric facilities in Finland using self-report diary forms for 1 week. In total, nurses used 20% of their weekly working hours on core interventions. The differences between the nurse groups were statistically significant (p ≤ 0.05) regarding the following core interventions: (a) care planning with physicians, (b) pharmacotherapy, and (c) basic clinical care. Nurses' qualifications, types of facilities and units, working experience, gender, and staffing levels explained the time used on core interventions. In summary, forensic psychiatric inpatients received insufficient appropriate nursing services according to the relevant guideline regarding schizophrenia. Furthermore, managerial recommendations need to restructure nurses' time use to increase the proportion of productive working hours spent with patients.

  18. Informed consent in direct-to-consumer personal genome testing: the outline of a model between specific and generic consent.

    Science.gov (United States)

    Bunnik, Eline M; Janssens, A Cecile J W; Schermer, Maartje H N

    2014-09-01

    Broad genome-wide testing is increasingly finding its way to the public through the online direct-to-consumer marketing of so-called personal genome tests. Personal genome tests estimate genetic susceptibilities to multiple diseases and other phenotypic traits simultaneously. Providers commonly make use of Terms of Service agreements rather than informed consent procedures. However, to protect consumers from the potential physical, psychological and social harms associated with personal genome testing and to promote autonomous decision-making with regard to the testing offer, we argue that current practices of information provision are insufficient and that there is a place--and a need--for informed consent in personal genome testing, also when it is offered commercially. The increasing quantity, complexity and diversity of most testing offers, however, pose challenges for information provision and informed consent. Both specific and generic models for informed consent fail to meet its moral aims when applied to personal genome testing. Consumers should be enabled to know the limitations, risks and implications of personal genome testing and should be given control over the genetic information they do or do not wish to obtain. We present the outline of a new model for informed consent which can meet both the norm of providing sufficient information and the norm of providing understandable information. The model can be used for personal genome testing, but will also be applicable to other, future forms of broad genetic testing or screening in commercial and clinical settings. © 2012 John Wiley & Sons Ltd.

  19. Glycan specificity of the Vibrio vulnificus hemolysin lectin outlines evolutionary history of membrane targeting by a toxin family.

    Science.gov (United States)

    Kaus, Katherine; Lary, Jeffrey W; Cole, James L; Olson, Rich

    2014-07-29

    Pore-forming toxins (PFTs) are a class of pathogen-secreted molecules that oligomerize to form transmembrane channels in cellular membranes. Determining the mechanism for how PFTs bind membranes is important in understanding their role in disease and for developing possible ways to block their action. Vibrio vulnificus, an aquatic pathogen responsible for severe food poisoning and septicemia in humans, secretes a PFT called V. vulnificus hemolysin (VVH), which contains a single C-terminal targeting domain predicted to resemble a β-trefoil lectin fold. In order to understand the selectivity of the lectin for glycan motifs, we expressed the isolated VVH β-trefoil domain and used glycan-chip screening to identify that VVH displays a preference for terminal galactosyl groups including N-acetyl-d-galactosamine and N-acetyl-d-lactosamine. The X-ray crystal structure of the VVH lectin domain solved to 2.0Å resolution reveals a heptameric ring arrangement similar to the oligomeric form of the related, but inactive, lectin from Vibrio cholerae cytolysin. Structures bound to glycerol, N-acetyl-d-galactosamine, and N-acetyl-d-lactosamine outline a common and versatile mode of recognition allowing VVH to target a wide variety of cell-surface ligands. Sequence analysis in light of our structural and functional data suggests that VVH may represent an earlier step in the evolution of Vibrio PFTs. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Avaliação da concavidade lombar pelo método radiográfico e pela cifolordometria Evaluation of lumbar concavity using a radiographic method and kypholordometry

    Directory of Open Access Journals (Sweden)

    FR Souza

    2009-04-01

    's condition. One of these is the kypholordometer, a low-cost noninvasive instrument proposed for measuring spinal curvature in the sagittal plane. OBJECTIVES: To evaluate the intra- and inter-examiner reliability of the kypholordometer, to investigate its agreement with radiography, and to determine whether there is any correlation between measurements of lumbar curvature using the radiographic method and the kypholordometer. METHODS: Twenty healthy individuals of both sexes aged between 21 and 27 years were evaluated. They underwent radiographic examination of the lumbar spine in right lateral view while standing up. The radiographic images were evaluated by a radiologist using Cobb's method, with T12 and S1 as the reference points. The kypholordometry was carried out in the same position by three evaluators on two occasions, with the same vertebrae as the reference points. A straight line was drawn from T12 to the least prominent vertebra and another from S1 to the same vertebra, thus identifying the degree of lumbar concavity. RESULTS: The results demonstrated that kypholordometry presented excellent levels of reliability (both intra- and inter-examiner, but low agreement with radiography. However, there was a statistically significant positive correlation between the two methods studied (r=0.88. CONCLUSION: Kypholordometry is a quantitative method with excellent intra- and inter-examiner reliability for evaluating lumbar curvature. It may contribute greatly towards the clinical practice of physical therapists.

  1. The HOPE (Helping to Outline Paediatric Eating Disorders) Project: development and debut of a paediatric clinical eating disorder registry

    Science.gov (United States)

    2013-01-01

    Background The HOPE (Helping to Outline Paediatric Eating Disorders) Project is an ongoing registry study made up of a sequential cross-sectional sample prospectively recruited over 17 years, and is designed to answer empirical questions about paediatric eating disorders. This paper introduces the HOPE Project, describes the registry sample to-date, and discusses future directions and challenges and accomplishments. The project and clinical service were established in a tertiary academic hospital in Western Australia in 1996 with a service development grant. Research processes were inbuilt into the initial protocols and data collection was maintained in the following years. Recognisable progress with the research agenda accelerated only when dedicated research resources were obtained. The registry sample consists of consecutive children and adolescents assessed at the eating disorder program from 1996 onward. Standardised multidisciplinary data collected from family intake interview, parent and child clinical interviews, medical review, parent, child and teacher psychometric assessments, and inpatient admission records populate the HOPE Project database. Results The registry database to-date contains 941 assessments, of whom 685 met DSM-IV diagnostic criteria for an eating disorder at admission. The majority of the sample were females (91%) from metropolitan Perth (83%). The cases with eating disorders consist of eating disorders not otherwise specified (68%), anorexia nervosa (25%) and bulimia nervosa (7%). Among those with eating disorders, a history of weight loss since illness onset was almost universal (96%) with fear of weight gain (71%) common, and the median duration of illness was 8 months. Conclusions Over the next five years and more, we expect that the HOPE Project will make a strong scientific contribution to paediatric eating disorders research and will have important real-world applications to clinical practice and policy as the research unfolds

  2. Spatio-temporal dynamics and laterality effects of face inversion, feature presence and configuration, and face outline

    Directory of Open Access Journals (Sweden)

    Ksenija eMarinkovic

    2014-11-01

    Full Text Available Although a crucial role of the fusiform gyrus in face processing has been demonstrated with a variety of methods, converging evidence suggests that face processing involves an interactive and overlapping processing cascade in distributed brain areas. Here we examine the spatio-temporal stages and their functional tuning to face inversion, presence and configuration of inner features, and face contour in healthy subjects during passive viewing. Anatomically-constrained magnetoencephalography (aMEG combines high-density whole-head MEG recordings and distributed source modeling with high-resolution structural MRI. Each person's reconstructed cortical surface served to constrain noise-normalized minimum norm inverse source estimates. The earliest activity was estimated to the occipital cortex at ~100 ms after stimulus onset and was sensitive to an initial coarse level visual analysis. Activity in the right-lateralized ventral temporal area (inclusive of the fusiform gyrus peaked at ~160ms and was largest to inverted faces. Images containing facial features in the veridical and rearranged configuration irrespective of the facial outline elicited intermediate level activity. The M160 stage may provide structural representations necessary for downstream distributed areas to process identity and emotional expression. However, inverted faces additionally engaged the left ventral temporal area at ~180 ms and were uniquely subserved by bilateral processing. This observation is consistent with the dual route model and spared processing of inverted faces in prosopagnosia. The subsequent deflection, peaking at ~240ms in the anterior temporal areas bilaterally, was largest to normal, upright faces. It may reflect initial engagement of the distributed network subserving individuation and familiarity. These results support dynamic models suggesting that processing of unfamiliar faces in the absence of a cognitive task is subserved by a distributed and

  3. [Colors and their meaning in culture and psychology--a historical outline and contemporary status of color vision theories].

    Science.gov (United States)

    Grzybowski, Andrzej; Lewicka, Romana; Torlińska, Teresa; Stelcer, Bogusław

    2008-01-01

    psychological analyses of patients. The paper outlines major historical concepts of color perception and the present usefulness of color vision tests in psychology.

  4. Late-in-life surgery associated with Creutzfeldt-Jakob disease: a methodological outline for evidence-based guidance

    Science.gov (United States)

    2013-01-01

    Background There is increasing epidemiological evidence of etiological links between general surgery and sporadic Creutzfeldt-Jakob disease (sCJD) with long incubation periods. The purpose of this study was to identify specific surgical procedures potentially associated with sCJD to be targeted for preventive presurgical-intervention guidance. Results We propose a three-step clinical guidance outline where surgical procedures associated with sCJD clinical onset – potentially more contaminant - are taken into account. Data on hospital discharges and surgical procedures were obtained from Danish and Swedish national in-patient hospital registries for 167 sCJD cases, onset 1987–2003, and for 835 matched and 2,224 unmatched population controls. Surgery was allocated to different life-time periods as previously reported, and frequencies were compared using logistic regression analysis. In the year preceding clinical onset, persons with sCJD underwent a statistically significant higher number of minor surgical interventions (OR (95% CI): 17.50 (3.64-84.24)), transluminal endoscopies (OR: 2.73 (1.01–7.37)) and gastrointestinal operations (OR: 3.51 (1.21–10.19)) compared to matched controls. Surgical discharges clustered towards clinical onset. These differences increased during the clinical period, with statistically significant higher frequencies for both endoscopies and minor surgery (OR: 13.91 (5.87-32.95), and for main surgical procedures (OR: 2.10 (1.00-4.39)), particularly gastrointestinal surgery (OR: 6.00 (1.83-19.66)), and surgery contacting skeletal muscle. Comparisons with unmatched controls yielded similar results for neurosurgery in the clinical period (OR: 19.40 (2.22-168.34)). Conclusions These results suggest that some types of surgical procedures are associated with sCJD, after clinical onset or particularly just before onset. Selective planning of such surgery to minimize instrument/device contamination or quarantining might be feasible

  5. La ciudad Interior. Infinitud y concavidad en la No-Stop City (1970- 1971 = The Interior City. Infinity and Concavity in the No-Stop City(1970-1971

    Directory of Open Access Journals (Sweden)

    Pablo Martínez Capdevila

    2013-10-01

    ?.Palabras claveBranzi, disolución, pop, marxismo, neovanguardiasAbstractIn the late 60s it had become clear how the environment technification had allowed some typologies (supermarkets, car parks, factories to reach potentially unlimited built depths becoming, therefore, independent from the outside. The No-Stop City is born from a very simple idea: to extend this technification to the totality of built reality encompassing, not only almost all functions, but ultimately, the whole city. This operation has paradoxical effects: as architecture grows, it loses most of the features that have traditionally defined it. A dissolution by hypertrophy that gives rise to an homogeneous, concave and potentially infinite space.But beyond the pure technical feasibility, there are two key influences, seemingly contradictory, that explain this endeavor for an interior and endless city: Marxism and Pop Art. The project is, in many senses, a built manifesto reflecting the militancy of the group members within the Italian Marxism. But it is also the embodiment of the group's declared interest in Pop Art, popular culture and mass society. The cross-influence of communism and consumerism explains this "quantitative utopia" in which the society and the factory, the production and consumption, would match. A city based on the centrality of consumer products and the subsequent loss of prominence of architecture, in which the urban phenomenon, while spreading endlessly over territory, ignoring its rural exteriority, dissolves the home as a sphere of privacy, ignoring its domestic interiority.A project, also in the wake of Marshall McLuhan, that illustrates like few others the conversion of the urbane into a virtually omnipresent "condition" and that still interrogates us with questions that are, on the other hand, eternal: What is a building? What is a city?.Key wordsBranzi, dissolution, pop, Marxism, neo-avant-garde

  6. Nursing. A Basic Course Outline for Health Careers I (Grade 11). A Four Year "2+2" Articulated Curriculum for the Occupation of Nursing.

    Science.gov (United States)

    Robertson, Barbara; Stevenson, Nancy

    This course outline provides materials for the first course in a series of four courses that are included in a "2+2" curriculum for the occupation of registered nurse. It is part of a planned and articulated 4-year curriculum that spans the junior and senior years of high school and the freshman and sophomore years of the postsecondary…

  7. Nursing. A Basic Course Outline for Health Careers II (Grade 12). A Four Year "2+2" Articulated Curriculum for the Occupation of Nursing.

    Science.gov (United States)

    Stevenson, Nancy; Robertson, Barbara

    This course outline provides materials for the second course in a series of four courses that are included in a "2+2" curriculum for the occupation of registered nurse. It is part of a planned and articulated 4-year curriculum that spans the junior and senior years of high school and the freshman and sophomore years of the postsecondary…

  8. Hippocampal volume change measurement: Quantitative assessment of the reproducibility of expert manual outlining and the automated methods FreeSurfer and FIRST

    NARCIS (Netherlands)

    Mulder, E.R.; de Jong, R.A.; Knol, D.L.; van Schijndel, R.A.; Cover, K.S.; Visser, P.J.; Barkhof, F.; Vrenken, H.

    2014-01-01

    Background: To measure hippocampal volume change in Alzheimer's disease (AD) or mild cognitive impairment (MCI), expert manual delineation is often used because of its supposed accuracy. It has been suggested that expert outlining yields poorer reproducibility as compared to automated methods, but

  9. Outline for Remediation of Problem Areas for Children with Learning Disabilities. Revised. = Bosquejo para la Correccion de Areas Problematicas para Ninos con Impedimientos del Aprendizaje.

    Science.gov (United States)

    Bornstein, Joan L.

    The booklet outlines ways to help children with learning disabilities in specific subject areas. Characteristic behavior and remedial exercises are listed for seven areas of auditory problems: auditory reception, auditory association, auditory discrimination, auditory figure ground, auditory closure and sound blending, auditory memory, and grammar…

  10. 7 CFR Exhibit B to Subpart F of... - Suggested Outline for Seeking Information From Lenders on Credit Criteria for Graduation of...

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Suggested Outline for Seeking Information From Lenders... Seeking Information From Lenders on Credit Criteria for Graduation of Single Family Housing Loans Date... (CONTINUED) PROGRAM REGULATIONS (CONTINUED) SERVICING AND COLLECTIONS Analyzing Credit Needs and Graduation...

  11. 16 CFR Appendix I to Part 1402 - Recommended Outline for Instruction Booklet on “How To Safely Install Your CB Base Station Antenna”

    Science.gov (United States)

    2010-01-01

    ... on âHow To Safely Install Your CB Base Station Antennaâ I Appendix I to Part 1402 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CB BASE STATION... Outline for Instruction Booklet on “How To Safely Install Your CB Base Station Antenna” I. Required...

  12. Aircraft Instrument, Fire Protection, Warning, Communication, Navigation and Cabin Atmosphere Control System (Course Outline), Aviation Mechanics 3 (Air Frame): 9067.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This document presents an outline for a 135-hour course designed to familiarize the student with manipulative skills and theoretical knowledge concerning aircraft instrument systems like major flight and engine instruments; fire protection and fire fighting systems; warning systems and navigation systems; aircraft cabin control systems, such as…

  13. A Legal Odyssey, 2001. Papers [of the] Education Law Association Conference (47th, Albuquerque, New Mexico, November 15-17, 2001). Topic Outlines.

    Science.gov (United States)

    Education Law Association, Dayton, OH.

    This document is a collection of 53 topic outlines and conference papers whose topics cover a multitude of aspects of educational law. Subjects include the impacts of the Individuals with Disabilities Education Act (IDEA) on "normal" students, rights of nontenured teachers, sexual discrimination and harassment, school disciplinary issues,…

  14. The combination of ovarian volume and outline has better diagnostic accuracy than prostate-specific antigen (PSA) concentrations in women with polycystic ovarian syndrome (PCOs).

    Science.gov (United States)

    Bili, Eleni; Bili, Authors Eleni; Dampala, Kaliopi; Iakovou, Ioannis; Tsolakidis, Dimitrios; Giannakou, Anastasia; Tarlatzis, Basil C

    2014-08-01

    The aim of this study was to determine the performance of prostate specific antigen (PSA) and ultrasound parameters, such as ovarian volume and outline, in the diagnosis of polycystic ovary syndrome (PCOS). This prospective, observational, case-controlled study included 43 women with PCOS, and 40 controls. Between day 3 and 5 of the menstrual cycle, fasting serum samples were collected and transvaginal ultrasound was performed. The diagnostic performance of each parameter [total PSA (tPSA), total-to-free PSA ratio (tPSA:fPSA), ovarian volume, ovarian outline] was estimated by means of receiver operating characteristic (ROC) analysis, along with area under the curve (AUC), threshold, sensitivity, specificity as well as positive (+) and negative (-) likelihood ratios (LRs). Multivariate logistical regression models, using ovarian volume and ovarian outline, were constructed. The tPSA and tPSA:fPSA ratio resulted in AUC of 0.74 and 0.70, respectively, with moderate specificity/sensitivity and insufficient LR+/- values. In the multivariate logistic regression model, the combination of ovarian volume and outline had a sensitivity of 97.7% and a specificity of 97.5% in the diagnosis of PCOS, with +LR and -LR values of 39.1 and 0.02, respectively. In women with PCOS, tPSA and tPSA:fPSA ratio have similar diagnostic performance. The use of a multivariate logistic regression model, incorporating ovarian volume and outline, offers very good diagnostic accuracy in distinguishing women with PCOS patients from controls. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. Outline of the 1996-1998 IAEA co-ordinated research project on intercomparison for individual monitoring of external exposure from photon radiation

    International Nuclear Information System (INIS)

    Boehm, J.; Gustafsson, M.; Ouvrard, R.

    1999-01-01

    The outline of the IAEA Co-ordinated Research Project 1996-1998 on intercomparison for individual monitoring is described. The intercomparison focused on IAEA Member States in Eastern Europe and was based on the operational quantity personal dose equivalent, H p (10). The three phases of the intercomparison were: the preparatory phase including a workshop, the 'type-test' intercomparison, and the 'simulated workplace field' intercomparison. Details of the phases are given. (author)

  16. Targeting Employment Expansion, Economic Growth and Development in Sub-Saharan Africa: Outlines of an Alternative Economic Programme for the Region

    OpenAIRE

    James Heintz; Robert Pollin

    2008-01-01

    This paper outlines the elements of a development-targeted economic framework aimed at creating decent employment opportunities as a strategy for realizing core human development goals in Africa. Four policy areas form the core of the paper: monetary policy and inflation, exchange rate policy, development finance and financial sector reforms, and public investment and fiscal policy. This paper draws heavily on three large UNDP-sponsored studies of employment-oriented economic policies in Keny...

  17. Elliptical Fourier descriptors of outline and morphological analysis in caudal view of foramen magnum of the tropical raccoon (Procyon cancrivorus) (Linnaeus, 1758).

    Science.gov (United States)

    Samuel, O M; Casanova, P M; Olopade, J O

    2018-03-01

    To evaluate sexual-size dimorphism and attempt at categorization of inter-individual shapes of foramen magnum outlines using Fourier descriptors which allow for shape outline evaluations with a resultant specimen character definition. Individual characterization and quantification of foramen magnum shapes in direct caudal view based on elliptical Fourier technique was applied to 46 tropical raccoon skulls (26 females, 20 males). Incremental number of harmonics demonstrates morphological contributions of such descriptors with their relations to specific anatomical constructions established. The initial harmonics (1st to 3rd) described the general foramen shapes while the second (4th to 12th) demonstrated fine morphological details. Sexual-size dimorphism was observed in females (87.1%) and 91.7% in males, normalization of size produces 75% in females and 83% in males. With respect to foramen magnum dimorphism analysis, the result obtained through elliptic Fourier analysis was comparatively better in detail information of outline contours than earlier classical methods. The first four effective principal components defined 70.63% of its shape properties while the rest (22.51%) constituted fine details of morphology. Both size and shape seems important in sexual dimorphisms in this species, this investigation suggest clinical implications, taxonomic and anthropologic perspectives in foramen characterization magnum characterization and further postulates an increased possibility of volume reduction cerebellar protrusion, ontogenic magnum shape irregularities in the sample population with neurologic consequences especially among females. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  18. Output capabilities of personal music players and assessment of preferred listening levels of test subjects: outlining recommendations for preventing music-induced hearing loss.

    Science.gov (United States)

    Breinbauer, Hayo A; Anabalón, Jose L; Gutierrez, Daniela; Cárcamo, Rodrigo; Olivares, Carla; Caro, Jorge

    2012-11-01

    Our goal was to assess the impact of personal music players, earphones, and music styles on output, the subject's preferred listening levels, and outline recommendations for the prevention of music-induced hearing loss. Experimental study. Personal music players' output capabilities and volunteers' preferred output levels were assessed in different settings. Based on current noise-induced hearing loss exposure limits, recommendations were outlined. On three different devices and earphone types and 10 music styles, free field equivalent sound pressure output levels were assessed by applying a microphone probe inside the auditory canal. Forty-five hearing-healthy volunteers were asked to select preferred listening levels in different background noise scenarios. Sound pressure output reached 126 dB. No difference was found between device types, whereas earbud and supra-aural earphones showed significantly lower outputs than in-ear earphones (P music style groups were identified with as much as 14.4 dB difference between them. In silence, 17.8% of volunteers spontaneously selected a listening level above 85 dB. With 90 dB background noise, 40% selected a level above 94 dB. Earphone attenuation capability was found to correlate significantly with preferred level reductions (r = 0.585, P < .001). In-ear and especially supra-aural earphones reduced preferred listening levels the most. Safe-use recommendations were outlined, whereas selecting the lowest volume setting comfortable remained the main suggestion. High background noise attenuating earphones may help in reducing comfortable listening levels and should be preferred. A risk table was elaborated, presenting time limits before reaching a risky exposure. Copyright © 2012 The American Laryngological, Rhinological, and Otological Society, Inc.

  19. Some Reflections on the Origin of Reason Through an Outline of the Genealogy of Language in the Light of Homonymity, Analogy, and Metaphor

    DEFF Research Database (Denmark)

    Kirkeby, Ole Fogh

    2016-01-01

    The origin of reason through an outline of the genealogy of language in the light of homonymity, analogy, and metaphor. In this chapter, I try to show that reason as a cognitive capacity primarily functions through the use of homonyms. The argument is based on the fact that experience is created...... relating to their value basis, because reason also is involved as their principle of origin—qua practical reason—through which this metaphorical richness was originally coined. These principles of construction and deconstruction may also be applied to the analysis of reason itself since it also has...

  20. RF Home Team comments on the ''Technical Basis for the ITER-FEAT Outline Design'', presented by the Joint Central Team

    International Nuclear Information System (INIS)

    Filatov, O.G.

    2001-01-01

    In April-May the discussion of the Outline Design Report materials for the ITER-FEAT was organized in Russia. The discussion was held by three leading institutes - Kurchatov Institute (plasma physics, safety, auxiliary heating and diagnostics), Efremov Institute (electrophysical systems and engineering structures) and RDIPE (blanket) with participation of independent experts from leading RF institutions and enterprises involved in the ITER project. On the whole the project has been highly appreciated. Despite the very short time given for its preparation, it appears to be sufficiently consistent. Nevertheless, the Russian specialists (independent experts included) have made some remarks and recommendations with the aim to improve the Project

  1. The role of School of Mines in regional and national environmental protection endeavours. An outline of past and on-going project activities

    International Nuclear Information System (INIS)

    Sinkala, T; Simukanga, S.

    2002-01-01

    This paper outlines the contribution of the School of Mines in national and regional environmental protection activities. Projects include those undertaken under the Southern African Network for Training on the environment (SANTREN), Southern African Development Community (SADC), the Ministry of Mines and Mineral Development, and the Ministry of Environment and Natural Resources. Issues include mining and the environment, small scale mining, environmental impact assessments, river systems, water quality, air quality and environmental technologies. The paper is concluded by pointing out the efforts by the School to introduce a Mining and Environment Program in the wake of the need to promote public awareness at tertiary level. (authors)

  2. Outline of deaf schools on the level throughout the country : A study on architectural planning for the deaf school Part 1

    OpenAIRE

    平根, 孝光

    1993-01-01

    This paper is to make clear in outline of deaf schools on the level throughout the country in 1990s. The factors might supposedly exhibit the characteristics of deaf schools are as follows : 1) In deaf schools which have 4 departments and in which early-age education for such children of no less than 3 years of age is executed, babies, young children, children, and juveniles whose age cover a wide renge from 0 to 21 study in a same school, where great gaps are evidently noticed in such people...

  3. Influência das concavidades radiculares nas perdas clínicas de inserção, detectadas no exame clínico periodontal inicial The influence of root concavities on clinical attachment loss diagnosed at the initial evaluation of periodontal patients

    Directory of Open Access Journals (Sweden)

    Francisco Emilio PUSTIGLIONI

    1999-12-01

    Full Text Available O propósito deste estudo foi estabelecer a influência das concavidades radiculares na perda clínica de inserção (PCI diagnosticada no exame clínico periodontal inicial. Os dados de PCI foram obtidos dos primeiros e segundos pré-molares, caninos, incisivos laterais e centrais superiores e inferiores, de 163 pacientes. Os dados foram coletados das fichas periodontais dos pacientes que procuraram a Clínica do curso de Pós-Graduação em Periodontia da FOUSP. Foi realizada sondagem em todos os dentes para que se obtivesse as seguintes medidas: distância da linha esmalte cemento à margem gengival, profundidade clínica de sondagem (PCS nos sítios distovestibular (DV, centrovestibular (CV, mesiovestibular (MV, distolingual (DL, centrolingual (CL e mesiolingual (ML. Os dados foram incluídos no estudo quando pelo menos um dos sítios apresentasse PCI ³ 4 mm. Após a análise estatística (Friedman ANOVA test CV e CL mostraram valores de PCI estatisticamente menores para todos os dentes superiores e inferiores. Clinicamente CV mostrou os menores valores de perda clínica de inserção entre todos os dentes analisados, seguido de CL. Embora, baseados em nossos resultados, não exista correlação estatística entre PCI e a presença de concavidades radiculares, não podemos subestimar as últimas no exame clínico inicial, diagnóstico, prognóstico, planejamento cirúrgico e na fase de controle e manutenção do tratamento periodontal.The purpose of this study was to establish the influence of root concavities on clinical attachment loss (CAL that was diagnosed at the initial evaluation of periodontal patients. CAL data were analyzed in the following teeth of 163 patients: upper and lower second and first bicuspids, cuspids, lateral and central incisors. Data were retrieved from the initial dental chart of patients seeking treatment at the Periodontics Graduate Clinic, School of Dentistry, University of São Paulo. Probing was accomplished

  4. Allegheny County Basin Outlines Map

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This basins dataset was created to initiate regional watershed approaches with respect to sewer rehabilitation. If viewing this description on the Western...

  5. An outline of 1961 program

    International Nuclear Information System (INIS)

    1960-01-01

    The program of work for 1961 which the International Atomic Energy Agency's Board of Governors has presented to the Agency's General Conference for final approval provides for steady amplification of its work in technical assistance to specific projects, training of scientific personnel and scientific research. These activities and certain others are of special interest to those areas of the world that are less advanced in the utilization of atomic energy. This is in accord with the Agency's Statute which requires that it bear in mind 'the special needs of the under-developed areas of the world'. At the same time, the Board indicated that the 1961 program 'provides for activities intended to create a basis for general progress in the safe utilization of atomic energy for peaceful purposes which is of concern to all Member States. Thus the delay in the advent of generally economic nuclear power is used to build up the necessary technological infrastructure in the less developed countries and to establish an international framework of norms and regulations which an orderly and safe development of widespread nuclear industries will require'. Some highlights of the 1961 program are presented

  6. An Outline of Technicisation Theory.

    Science.gov (United States)

    Soheili, A.; Barjasteh, D.; Al Qadhi, Laila

    2001-01-01

    Proposes "technicisation" theory with five central hypotheses to account for various aspects of foreign students learning Technical English (TE), including its linguistic, learning, experiential, cultural, and motivational dimensions. Suggests that the fundamental hypotheses are applicable to TE learning but they may, mutatis mutandis,…

  7. Outlines of a Polonius Complex

    Directory of Open Access Journals (Sweden)

    Thiago Martins Prado

    2016-09-01

    Full Text Available This article focuses on analyzing the discourse and the actions of the character Polonius in The tragedy of Hamlet, by William Shakespeare, in order to articulate Updike's vision of the counselor's personality in the novel Gertrude and Claudius. Based on this analysis, it aims to describe the traits of the character that may contribute to a discussion about contemporary behavior.

  8. Outlining ethical issues in nanotechnologies.

    Science.gov (United States)

    Spagnolo, Antonio G; Daloiso, Viviana

    2009-09-01

    Nanotechnologies are an expression of the human ability to control and manipulate matter on a very small scale. Their use will enable an even and constant monitoring of human organisms, in a new and perhaps less invasive way. Debates at all levels--national, European and international--have pointed out the common difficulty of giving a complete, clear definition of nanotechnologies. This is primarily due to the variety of their components, to the fact that there is not just one technology but several. The most significant medical applications of nanotechnologies are in the diagnostic and the therapeutic fields, eg biosensors and molecular imaging, providing diagnosis and drug delivery with no invasive methods involved. Like any other emerging field, such technologies imply new possibilities for improving health but, on the other hand, they are still at an experimental stage and therefore should be implemented under rigorous safety testing before going on general release. For this purpose, the ethical, legal and social implications (ELSI) of nanotechnologies have been elaborated by study groups, in order to develop solutions before the results of the tests are diffused into medical practice. The aim of this paper is to define some of the ethical issues concerning biomedical applications and to evaluate whether there is a need for new or additional guidelines and regulations.

  9. Call for Outline Research Proposals

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    2013-07-25

    Jul 25, 2013 ... The program will support high quality research involving local .... to minimize such risk: the materiality of the investment, the management capacity of the ... The total contribution of IDRC towards the budget of the project will be.

  10. Computers and geophysics: Requirements outlined

    Science.gov (United States)

    The use of computers to process enormous volumes of data is likely to improve our abilities to predict earthquakes and issue tsunami warnings, geophysicist J. Freeman Gilbert recently told a House of Representatives task force on science policy. Gilbert, of the Scripps Institution of Oceanography at the University of California, San Diego, testified before the task force on September 11, in one of a series of hearings intended to explore the “impact of the information age on science.” Scientists and administrators from universities and private industry served as witnesses during the 3 days of hearings.Rep. George E. Brown, J r . , (D-Calif.) asked Gilbert to compare the amount of damage done by tsunamis in the United States to the cost of improved detection and warning systems. “I think it's worth the effort,” Gilbert responded, adding that as in the case of hurricane warnings, tsunami warnings would affect only a small proportion of the nation's population but could be crucial to protect their lives and property. Such a system, Gilbert said, “represents technology that is easy to implement.”

  11. Reliability on ISS Talk Outline

    Science.gov (United States)

    Misiora, Mike

    2015-01-01

    1. Overview of ISS 2. Space Environment and it effects a. Radiation b. Microgravity 3. How we ensure reliability a. Requirements b. Component Selection i. Note: I plan to stay away from talk about Rad Hardened components and talk about why we use older processors because they are less susceptible to SEUs. c. Testing d. Redundancy / Failure Tolerance e. Sparing strategies 4. Operational Examples a. Multiple MDM Failures on 6A due to hard drive failure In general, my plan is to only talk about data that is currently available via normal internet sources to ensure that I stay away from any topics that would be Export Controlled, ITAR, or NDA-controlled. The operational example has been well-reported on in the media and those are the details that I plan to cover. Additionally I am not planning on using any slides or showing any photos during the talk.

  12. The validation index: a new metric for validation of segmentation algorithms using two or more expert outlines with application to radiotherapy planning.

    Science.gov (United States)

    Juneja, Prabhjot; Evans, Philp M; Harris, Emma J

    2013-08-01

    Validation is required to ensure automated segmentation algorithms are suitable for radiotherapy target definition. In the absence of true segmentation, algorithmic segmentation is validated against expert outlining of the region of interest. Multiple experts are used to overcome inter-expert variability. Several approaches have been studied in the literature, but the most appropriate approach to combine the information from multiple expert outlines, to give a single metric for validation, is unclear. None consider a metric that can be tailored to case-specific requirements in radiotherapy planning. Validation index (VI), a new validation metric which uses experts' level of agreement was developed. A control parameter was introduced for the validation of segmentations required for different radiotherapy scenarios: for targets close to organs-at-risk and for difficult to discern targets, where large variation between experts is expected. VI was evaluated using two simulated idealized cases and data from two clinical studies. VI was compared with the commonly used Dice similarity coefficient (DSCpair - wise) and found to be more sensitive than the DSCpair - wise to the changes in agreement between experts. VI was shown to be adaptable to specific radiotherapy planning scenarios.

  13. Theoretical and practical outline of the Copenhagen PACT narrative-based exercise counselling manual to promote physical activity in post-therapy cancer survivors

    DEFF Research Database (Denmark)

    Midtgaard, Julie

    2013-01-01

    are able to adopt long-term physical activity habits depends largely on their motivation. AIM: This theoretical paper aims to outline how researchers and practitioners can draw from Antonovsky's salutogenetic theory and White & Epston's Narrative Therapy to develop and implement intervention efforts......BACKGROUND: Sedentary behaviour and reduced exercise capacity are potential persisting effects of anti-cancer therapy that may predispose to serious health conditions. It is well-established that physical exercise may prevent some of these problems. However, the extent to which cancer survivors...... centered on promotion of long-term physical activity behaviour, while at the same time increasing the individual cancer survivor's sense of meaning and personal health resources. MATERIAL AND METHODS: The Copenhagen PACT (Physical Activity after Cancer Treatment) Study targeting adoption and maintenance...

  14. Hippocampal volume change measurement: quantitative assessment of the reproducibility of expert manual outlining and the automated methods FreeSurfer and FIRST.

    Science.gov (United States)

    Mulder, Emma R; de Jong, Remko A; Knol, Dirk L; van Schijndel, Ronald A; Cover, Keith S; Visser, Pieter J; Barkhof, Frederik; Vrenken, Hugo

    2014-05-15

    To measure hippocampal volume change in Alzheimer's disease (AD) or mild cognitive impairment (MCI), expert manual delineation is often used because of its supposed accuracy. It has been suggested that expert outlining yields poorer reproducibility as compared to automated methods, but this has not been investigated. To determine the reproducibilities of expert manual outlining and two common automated methods for measuring hippocampal atrophy rates in healthy aging, MCI and AD. From the Alzheimer's Disease Neuroimaging Initiative (ADNI), 80 subjects were selected: 20 patients with AD, 40 patients with mild cognitive impairment (MCI) and 20 healthy controls (HCs). Left and right hippocampal volume change between baseline and month-12 visit was assessed by using expert manual delineation, and by the automated software packages FreeSurfer (longitudinal processing stream) and FIRST. To assess reproducibility of the measured hippocampal volume change, both back-to-back (BTB) MPRAGE scans available for each visit were analyzed. Hippocampal volume change was expressed in μL, and as a percentage of baseline volume. Reproducibility of the 1-year hippocampal volume change was estimated from the BTB measurements by using linear mixed model to calculate the limits of agreement (LoA) of each method, reflecting its measurement uncertainty. Using the delta method, approximate p-values were calculated for the pairwise comparisons between methods. Statistical analyses were performed both with inclusion and exclusion of visibly incorrect segmentations. Visibly incorrect automated segmentation in either one or both scans of a longitudinal scan pair occurred in 7.5% of the hippocampi for FreeSurfer and in 6.9% of the hippocampi for FIRST. After excluding these failed cases, reproducibility analysis for 1-year percentage volume change yielded LoA of ±7.2% for FreeSurfer, ±9.7% for expert manual delineation, and ±10.0% for FIRST. Methods ranked the same for reproducibility of 1

  15. Development status of the HTGR in the world. Outline and construction status of the demonstration HTGR program (HTR-PM) of China

    International Nuclear Information System (INIS)

    Ohashi, Kazutaka; Okamoto, Futoshi; Mouri, Tomoaki; Saito, Masanao; Nishio, Hiroki; Ohashi, Junpei

    2014-01-01

    Based on successful construction and operation experiences of HTR-10 reactor with pebble bed fuel and helium coolant, HTR-PM (HTR Pebble-bed Modular) reactor program was under way with 200 MWe of twin reactors with the same core configuration as HTR-10 reactor, which, each with a single steam generator, would drive a single steam turbine. Core height was 11 meters, and main steam temperature would be at 566 C. Although HTR-PM reactor program was interrupted by effects of the Fukushima accident, first concrete basement construction was started in December 2012 with aiming at connecting the Grid in 2017. This article reviewed outline and construction status of HTR-PM reactor in China. (T. Tanaka)

  16. Outline of research program on thorium fuel supported by grant-in-aid for energy research of ministry of education, science and culture

    International Nuclear Information System (INIS)

    Shibata, Toshikazu

    1984-01-01

    Since 1980, the Research Program on Thorium Fuel has been performed under the support of Grant-in-Aid for Energy Research of the Ministry of Education, Science and Culture of Japanese Government on the university basis including several tens professors. The main results have been published in the English-written report, ''Research on Thorium Fuel (SPEY-9, 1984)''. This report describes the outline and review of the symposium held on January 31, 1984. It consists of nuclear data, reactor physics, thorium fuel, irradiation of thorium, down-stream, biological effect, molten salt reactor engineering and others. It has been the first trial to perform such a big systematic cooperative studies in nuclear field on the university basis in Japan. (author)

  17. Nitrous oxide emission from the agriculture in the Netherlands. Outline of effects of manure and ammonia measures; Lachgasemissie uit de Nederlandse landbouw. Verkenning effecten mest- en ammoniakmaatregelen

    Energy Technology Data Exchange (ETDEWEB)

    Kros, J.; De Vries, W.; Oenema, O.; Velthof, G.; Kuikman, P.J.; Van Hove, B. [Divisie Bodem, Alterra, Wageningen Universiteit en Research Centrum, Wageningen (Netherlands)

    2004-03-01

    By means of the model INITIATOR an integral outline was made of the effects of several measures within the framework of the manure and ammonia policy focusing on nitrous oxide emission. The results are compared with the IPCC method. The model INITIATOR is a mechanistic model by means of which the carbon cycle in the Netherlands can be differentiated on a regional scale as a function of land use, type of soil and hydrology. [Dutch] Met behulp van het model INITIATOR is een integrale verkenning gemaakt van de effecten van verschillende maatregelen in het kader van het mest- en ammoniakbeleid op de emissie van Iachgas.Voor de huidige situatie zijn de uitkomsten vergeleken met die van de gangbare IPCC-methode (International Panel on Climate Change)

  18. Morphometric Comparison of Clavicle Outlines from 3D Bone Scans and 2D Chest Radiographs: A Short-listing Tool to Assist Radiographic Identification of Human Skeletons

    Energy Technology Data Exchange (ETDEWEB)

    Stephan, Carl N.; Amidan, Brett G.; Trease, Harold E.; Guyomarch, Pierre; Pulsipher, Trenton C.; Byrd, John E.

    2014-03-01

    This paper describes a computerized clavicle identification system, primarily designed to resolve the identities of unaccounted for US soldiers who fought in the Korean War. Elliptical Fourier analysis is used to quantify the clavicle outline shape from skeletons and postero-anterior antemortem chest radiographs to rank individuals in terms of metric distance. Similar to leading fingerprint identification systems, shortlists of the top matching candidates are extracted for subsequent human visual assessment. Two independent tests of the computerized system using 17 field-recovered skeletons and 409 chest radiographs demonstrate that true positive matches are captured within the top 5% of the sample 75% of the time. These results are outstanding given the eroded state of some field-recovered skeletons and the faintness of the 1950’s photoflurographs. These methods enhance the capability to resolve several hundred cold cases for which little circumstantial information exists and current DNA and dental record technologies cannot be applied.

  19. Correlation between volume and morphological changes in the hippocampal formation in Alzheimer's disease: rounding of the outline of the hippocampal body on coronal MR images

    International Nuclear Information System (INIS)

    Adachi, Michito; Sato, Takamichi; Kawakatsu, Shinobu; Ohshima, Fumi

    2012-01-01

    The aim of this study was to investigate whether the outline of the hippocampal body becomes rounded on coronal magnetic resonance imaging (MRI) as the volume of the hippocampal formation decreases in Alzheimer's disease (AD). Institutional review board approval of the study protocol was obtained, and all subjects provided informed consent for the mini-mental state examination (MMSE) and MRI. The MRI and MMSE were prospectively performed in all 103 subjects (27 men and 76 women; mean age ± standard deviation, 77.7 ± 7.8 years) who had AD or were concerned about having of dementia and who consulted our institute over 1 year. The subjects included 14 non-dementia cases (MMSE score ≥ 28) and 89 AD cases (MMSE score ≤ 27). The total volume of the bilateral hippocampal formation (VHF) was assessed with a tracing method, and the ratio of the VHF to the intracranial volume (RVHF) and the rounding ratio (RR) of the hippocampal body (mean ratio of its short dimension to the long dimension in the bilateral hippocampal body) were calculated. Using Spearman's correlation coefficient, the correlations between RR and VHF and between RR and RVHF were assessed. Correlation coefficients between RR and VHF and between RR and RVHF were -0.419 (p < 0.01) and -0.418 (p < 0.01), respectively. There was a significant negative correlation between RR and the volume of the hippocampal formation. The outline of the body of the hippocampal formation becomes rounded on coronal images as its volume decreases in AD. (orig.)

  20. Experimentally studied dynamic dose interplay does not meaningfully affect target dose in VMAT SBRT lung treatments

    Energy Technology Data Exchange (ETDEWEB)

    Stambaugh, Cassandra [Department of Physics, University of South Florida, Tampa, Florida 33612 (United States); Nelms, Benjamin E. [Canis Lupus LLC, Merrimac, Wisconsin 53561 (United States); Dilling, Thomas; Stevens, Craig; Latifi, Kujtim; Zhang, Geoffrey; Moros, Eduardo; Feygelman, Vladimir [Department of Radiation Oncology, Moffitt Cancer Center, Tampa, Florida 33612 (United States)

    2013-09-15

    Purpose: The effects of respiratory motion on the tumor dose can be divided into the gradient and interplay effects. While the interplay effect is likely to average out over a large number of fractions, it may play a role in hypofractionated [stereotactic body radiation therapy (SBRT)] treatments. This subject has been extensively studied for intensity modulated radiation therapy but less so for volumetric modulated arc therapy (VMAT), particularly in application to hypofractionated regimens. Also, no experimental study has provided full four-dimensional (4D) dose reconstruction in this scenario. The authors demonstrate how a recently described motion perturbation method, with full 4D dose reconstruction, is applied to describe the gradient and interplay effects during VMAT lung SBRT treatments.Methods: VMAT dose delivered to a moving target in a patient can be reconstructed by applying perturbations to the treatment planning system-calculated static 3D dose. Ten SBRT patients treated with 6 MV VMAT beams in five fractions were selected. The target motion (motion kernel) was approximated by 3D rigid body translation, with the tumor centroids defined on the ten phases of the 4DCT. The motion was assumed to be periodic, with the period T being an average from the empirical 4DCT respiratory trace. The real observed tumor motion (total displacement ≤8 mm) was evaluated first. Then, the motion range was artificially increased to 2 or 3 cm. Finally, T was increased to 60 s. While not realistic, making T comparable to the delivery time elucidates if the interplay effect can be observed. For a single fraction, the authors quantified the interplay effect as the maximum difference in the target dosimetric indices, most importantly the near-minimum dose (D{sub 99%}), between all possible starting phases. For the three- and five-fractions, statistical simulations were performed when substantial interplay was found.Results: For the motion amplitudes and periods obtained from the 4DCT, the interplay effect is negligible (<0.2%). It is also small (0.9% average, 2.2% maximum) when the target excursion increased to 2–3 cm. Only with large motion and increased period (60 s) was a significant interplay effect observed, with D{sub 99%} ranging from 16% low to 17% high. The interplay effect was statistically significantly lower for the three- and five-fraction statistical simulations. Overall, the gradient effect dominates the clinical situation.Conclusions: A novel method was used to reconstruct the volumetric dose to a moving tumor during lung SBRT VMAT deliveries. With the studied planning and treatment technique for realistic motion periods, regardless of the amplitude, the interplay has nearly no impact on the near-minimum dose. The interplay effect was observed, for study purposes only, with the period comparable to the VMAT delivery time.

  1. Experimentally studied dynamic dose interplay does not meaningfully affect target dose in VMAT SBRT lung treatments.

    Science.gov (United States)

    Stambaugh, Cassandra; Nelms, Benjamin E; Dilling, Thomas; Stevens, Craig; Latifi, Kujtim; Zhang, Geoffrey; Moros, Eduardo; Feygelman, Vladimir

    2013-09-01

    The effects of respiratory motion on the tumor dose can be divided into the gradient and interplay effects. While the interplay effect is likely to average out over a large number of fractions, it may play a role in hypofractionated [stereotactic body radiation therapy (SBRT)] treatments. This subject has been extensively studied for intensity modulated radiation therapy but less so for volumetric modulated arc therapy (VMAT), particularly in application to hypofractionated regimens. Also, no experimental study has provided full four-dimensional (4D) dose reconstruction in this scenario. The authors demonstrate how a recently described motion perturbation method, with full 4D dose reconstruction, is applied to describe the gradient and interplay effects during VMAT lung SBRT treatments. VMAT dose delivered to a moving target in a patient can be reconstructed by applying perturbations to the treatment planning system-calculated static 3D dose. Ten SBRT patients treated with 6 MV VMAT beams in five fractions were selected. The target motion (motion kernel) was approximated by 3D rigid body translation, with the tumor centroids defined on the ten phases of the 4DCT. The motion was assumed to be periodic, with the period T being an average from the empirical 4DCT respiratory trace. The real observed tumor motion (total displacement ≤ 8 mm) was evaluated first. Then, the motion range was artificially increased to 2 or 3 cm. Finally, T was increased to 60 s. While not realistic, making T comparable to the delivery time elucidates if the interplay effect can be observed. For a single fraction, the authors quantified the interplay effect as the maximum difference in the target dosimetric indices, most importantly the near-minimum dose (D99%), between all possible starting phases. For the three- and five-fractions, statistical simulations were performed when substantial interplay was found. For the motion amplitudes and periods obtained from the 4DCT, the interplay effect is negligible (interplay effect observed, with D99% ranging from 16% low to 17% high. The interplay effect was statistically significantly lower for the three- and five-fraction statistical simulations. Overall, the gradient effect dominates the clinical situation. A novel method was used to reconstruct the volumetric dose to a moving tumor during lung SBRT VMAT deliveries. With the studied planning and treatment technique for realistic motion periods, regardless of the amplitude, the interplay has nearly no impact on the near-minimum dose. The interplay effect was observed, for study purposes only, with the period comparable to the VMAT delivery time.

  2. Experimentally studied dynamic dose interplay does not meaningfully affect target dose in VMAT SBRT lung treatments

    International Nuclear Information System (INIS)

    Stambaugh, Cassandra; Nelms, Benjamin E.; Dilling, Thomas; Stevens, Craig; Latifi, Kujtim; Zhang, Geoffrey; Moros, Eduardo; Feygelman, Vladimir

    2013-01-01

    Purpose: The effects of respiratory motion on the tumor dose can be divided into the gradient and interplay effects. While the interplay effect is likely to average out over a large number of fractions, it may play a role in hypofractionated [stereotactic body radiation therapy (SBRT)] treatments. This subject has been extensively studied for intensity modulated radiation therapy but less so for volumetric modulated arc therapy (VMAT), particularly in application to hypofractionated regimens. Also, no experimental study has provided full four-dimensional (4D) dose reconstruction in this scenario. The authors demonstrate how a recently described motion perturbation method, with full 4D dose reconstruction, is applied to describe the gradient and interplay effects during VMAT lung SBRT treatments.Methods: VMAT dose delivered to a moving target in a patient can be reconstructed by applying perturbations to the treatment planning system-calculated static 3D dose. Ten SBRT patients treated with 6 MV VMAT beams in five fractions were selected. The target motion (motion kernel) was approximated by 3D rigid body translation, with the tumor centroids defined on the ten phases of the 4DCT. The motion was assumed to be periodic, with the period T being an average from the empirical 4DCT respiratory trace. The real observed tumor motion (total displacement ≤8 mm) was evaluated first. Then, the motion range was artificially increased to 2 or 3 cm. Finally, T was increased to 60 s. While not realistic, making T comparable to the delivery time elucidates if the interplay effect can be observed. For a single fraction, the authors quantified the interplay effect as the maximum difference in the target dosimetric indices, most importantly the near-minimum dose (D 99% ), between all possible starting phases. For the three- and five-fractions, statistical simulations were performed when substantial interplay was found.Results: For the motion amplitudes and periods obtained from the 4DCT, the interplay effect is negligible ( 99% ranging from 16% low to 17% high. The interplay effect was statistically significantly lower for the three- and five-fraction statistical simulations. Overall, the gradient effect dominates the clinical situation.Conclusions: A novel method was used to reconstruct the volumetric dose to a moving tumor during lung SBRT VMAT deliveries. With the studied planning and treatment technique for realistic motion periods, regardless of the amplitude, the interplay has nearly no impact on the near-minimum dose. The interplay effect was observed, for study purposes only, with the period comparable to the VMAT delivery time

  3. Does IGRT ensure target dose coverage of head and neck IMRT patients?

    International Nuclear Information System (INIS)

    Graff, Pierre; Hu Weigang; Yom, Sue S.; Pouliot, Jean

    2012-01-01

    Purpose: To determine if image-guided radiotherapy (IGRT) ensures dose coverage to the target, and to assess the dosimetric impact of anatomic changes using megavoltage cone-beam CT (MVCBCT) for patient positioning during head and neck IMRT. Methods and materials: Forty-eight MVCBCT from 10 head and neck IMRT/IGRT patients were analyzed off-line. Target volumes and organs at risk (OARs) contours delineated on CT were transferred and adjusted on MVCBCT images. Each MVCBCT was processed to allow dose recalculation, resulting in 469 dose–volume histograms (DVHs). The concept of dosimetric latitude was introduced to provide a clinical perspective. Results: MVCBCT target DVHs showed a moderate level of difference in D95 (dose to ⩾95% of volume), generally less than a 5% difference from the planned dose. Delivered-dose increases to the spinal cord and brainstem showed no apparent time trend. The 4 mm margin around OARs was a useful precaution to prevent exceeding critical dose thresholds. The parotid glands showed progressive increases in mean dose related to shrinkage of the external contours. Conclusion: IGRT repositioning ensured target volume coverage, but significant dose variations were observed for OARs. The dosimetric impact of anatomic changes during radiotherapy was of lesser importance than the effects of IGRT repositioning.

  4. Conference "Internet, Web, What's next?" on 26 June 1998 at CERN : Robert Verrue, Director general of the DGXIII of the European Commission, responsible for telecommunication in Europe, outlines the Commission's vision on the Information Society in Europe

    CERN Multimedia

    1998-01-01

    Conference "Internet, Web, What's next?" on 26 June 1998 at CERN : Robert Verrue, Director general of the DGXIII of the European Commission, responsible for telecommunication in Europe, outlines the Commission's vision on the Information Society in Europe

  5. 17th Business Report Meeting of New Energy Industrial Technology Development Organization (NEDO). Outline of business; Dai 17 kai NEDO jigyo hokokukai. Gyomu gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-25

    This is a report on the 17th Business Report Meeting of NEDO held in September, 1997. In Chapter 1, NEDO's business activities were outlined in terms of new energy, industrial technology, coal policy, compensation for coal mine pollution, alcohol production, etc. In Chapter 2, described were NEDO's budget and account settlement. In Chapter 3, reported were the FY 1996 results of the development of new energy, that is, the development of solar energy utilization technology, geothermal resource development, development of geothermal energy utilization technology, development of coal energy utilization technology, development of coal resource, development of fuel/storage technology, development of hydrogen/alcohol/biomass technology, development of other petroleum substituting energy technology, project for promotion of new energy introduction, project on international energy policy, project on development/introduction survey, and project on information service by NEDO Information Center. In Chapter 4, as the FY 1996 results of the R and D of industrial technology, etc., described were R and D projects, medical/welfare equipment related project, R and D projects on environmental technology, and international industry technology related projects. In Chapters 5 and 6, stated was the coal related project. In Chapter 7, mentioned was the alcohol production project. (NEDO)

  6. R and D on new energy technologies. Outlines of fiscal 1976 research results; Shin energy gijutsu kenkyu kaihatsu 1976 nendo kenkyu seika no gaiyo. Kenkyu kaihatsuhi kamihanki

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1976-07-01

    This report outlines the results of (1) 8 researches on solar energy technology, (2) 4 researches on hydrogen energy, and (3) 4 general researches. (1) includes the prototype measuring instrument of near IR solar direct radiation using an interference filter to measure solar spectral irradiance, the prototype small-scale solar heat power model system, selective absorption and transmission films as solar heat power generation materials, InP solar cell and new solar cell system configuration, micro-wave power transmission of solar energy, and the expansion turbine using low-boiling point coolant for space power generation. (2) includes the hydrogen energy system, high-temperature thermolysis of water at 1,000 degrees C, prototype zirconia single-crystals for new solid electrolyte fuel cells, and the large-capacity high- temperature solid electrolyte fuel cell power system. (3) includes the total new energy system, the prototype superconducting magnet for energy storage, study on mechanism of an anomalous absorption effect by irradiation of strong laser beam onto high-temperature high-density ionized gas, and low-temperature difference power generation in the ocean. (NEDO)

  7. Plants in water-controlled ecosystems: active role in hydrologic processes and response to water stress. I. Scope and general outline

    Science.gov (United States)

    Rodriguez-Iturbe, I.; Porporato, A.; Laio, F.; Ridolfi, L.

    This series of four papers studies the complex dynamics of water-controlled ecosystems from the hydro-ecological point of view [e.g., I. Rodriguez-Iturbe, Water Resour. Res. 36 (1) (2000) 3-9]. After this general outline, the role of climate, soil, and vegetation is modeled in Part II [F. Laio, A. Porporato, L. Ridolfi, I. Rodriguez-Iturbe, Adv. Water Res. 24 (7) (2001) 707-723] to investigate the probabilistic structure of soil moisture dynamics and the water balance. Particular attention is given to the impact of timing and amount of rainfall, plant physiology, and soil properties. From the statistical characterization of the crossing properties of arbitrary levels of soil moisture, Part III develops an expression for vegetation water stress [A. Porporato, F. Laio, L. Ridolfi, I. Rodriguez-Iturbe, Adv. Water Res. 24 (7) (2001) 725-744]. This measure of stress is then employed to quantify the response of plants to soil moisture deficit as well as to infer plant suitability to given environmental conditions and understand some of the reasons for possible coexistence of different species. Detailed applications of these concepts are developed in Part IV [F. Laio, A. Porporato, C.P. Fernandez-Illescas, I. Rodriguez-Iturbe, Adv. Water Res. 24 (7) (2001) 745-762], where we investigate the dynamics of three different water-controlled ecosystems.

  8. Invasive placenta previa. Placental bulge with distorted uterine outline and uterine serosal hypervascularity at 1.5T MRI - useful features for differentiating placenta percreta from placenta accreta

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xin; Zhang, Xinjuan; Wang, Shanshan; Shi, Honglu; Gao, Fei; Wang, Guangbin [Shandong University, Department of MR, Shandong Medical Imaging Research Institute, Jinan, Shandong (China); Shan, Ruiqin [Jinan Maternity and Child Care Hospital, Department of Obstetrics, Jinan (China); Zhao, Lianxin [Qilu Hospital of Shandong University, Department of Radiology, Jinan, Shandong (China); Song, Qingxu [Qilu Hospital of Shandong University, Department of Radiation Oncology, Jinan, Shandong (China); Zuo, Changting [Shandong Provincial Hospital Affiliated to Shandong University, Department of Obstetrics and Gynaecology, Jinan, Shandong (China); Qian, Tianyi [MR Collaborations NE Asia, Siemens Healthcare, Beijing (China); Limperopoulos, Catherine [Children' s National Health System, Division of Diagnostic Imaging and Radiology, Washington, DC (United States); George Washington University School of Medicine, Department of Radiology, Washington, DC (United States)

    2018-02-15

    To characterise MRI features of invasive placenta previa and to identify specific features for differentiating placenta percreta (PP) from placenta accreta (PA). Forty-five women with PP and 93 women with PA who underwent 1.5T placental MRI were included. Two radiologists independently evaluated the MRI features of invasive placenta previa, including our novel type of placental bulge (i.e. placental bulge type-II, characterized by placental bulge with distorted uterine outline). Pearson's chi-squared or Fisher's two-sided exact test was performed to compare the MRI features between PP and PA. Logistic stepwise regression analysis and the area under the receiver operating characteristic curve (AUC) were performed to select the optimal features for differentiating PP from PA. Significant differences were found in nine MRI features between women with PP and those with PA (P <0.05). Placental bulge type-II and uterine serosal hypervascularity were independently associated with PP (odds ratio = 48.618, P < 0.001; odds ratio = 4.165, P = 0.018 respectively), and the combination of the two MRI features to distinguish PP from PA yielded an AUC of 0.92 for its predictive performance. Placental bulge type-II and uterine serosal hypervascularity are useful MRI features for differentiating PP from PA. (orig.)

  9. Genetic, clinical and pharmacological determinants of out-of-hospital cardiac arrest: rationale and outline of the AmsteRdam Resuscitation Studies (ARREST) registry

    Science.gov (United States)

    Blom, M T; van Hoeijen, D A; Bardai, A; Berdowski, J; Souverein, P C; De Bruin, M L; Koster, R W; de Boer, A; Tan, H L

    2014-01-01

    Introduction Out-of-hospital cardiac arrest (OHCA) is a major public health problem. Recognising the complexity of the underlying causes of OHCA in the community, we aimed to establish the clinical, pharmacological, environmental and genetic factors and their interactions that may cause OHCA. Methods and analysis We set up a large-scale prospective community-based registry (AmsteRdam Resuscitation Studies, ARREST) in which we prospectively include all resuscitation attempts from OHCA in a large study region in the Netherlands in collaboration with Emergency Medical Services. Of all OHCA victims since June 2005, we prospectively collect medical history (through hospital and general practitioner), and current and previous medication use (through community pharmacy). In addition, we include DNA samples from OHCA victims with documented ventricular tachycardia/fibrillation during the resuscitation attempt since July 2007. Various study designs are employed to analyse the data of the ARREST registry, including case–control, cohort, case only and case-cross over designs. Ethics and dissemination We describe the rationale, outline and potential results of the ARREST registry. The design allows for a stable and reliable collection of multiple determinants of OHCA, while assuring that the patient, lay-caregiver or medical professional is not hindered in any way. Such comprehensive data collection is required to unravel the complex basis of OHCA. Results will be published in peer-reviewed journals and presented at relevant scientific symposia. PMID:25332818

  10. New energy vision of the Sen'nan city area. Outline; 2001 nendo Sen'nan shi chiiki shin energy vision (Gaiyo ban)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-02-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Sen'nan City, Osaka Prefecture, a new energy vision was worked out, and a version of the outline was made. The policy on new energy introduction was described as follows: to make a great use of solar energy; to promote the spread of low-emission car and other new energy; to construct a system for spread that is connected to cooperation with citizen and education/enlightenment. Concretely, the following were cited: introduction of photovoltaic power generation to the city office/elementary school/junior high school; study of preferential treatment for introduction of solar energy; introduction of low-emission car to official vehicle; study of preferential treatment for introduction of low-emission car; promotion of car sharing by low-emission car; introduction of natural gas cogeneration and fuel cell to the city office; installation of street light using small wind power generation; potential study of small- and medium-size power generation; support for class for new energy experience at elementary/junior high school; potential study of utilization of biomass energy such as bamboo charcoal; study of preferential treatment for new energy to be given to citizen and enterprises in the city; construction/support of energy utilization system using waste, etc. (NEDO)

  11. Collection of outlines of achievement reports for fiscal 1976 on Sunshine Program. Hydrogen energy; 1976 nendo sunshine keikakaku seika hokokusho gaiyoshu. Suiso energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1977-04-01

    Twenty studies are outlined, which are: Hydrogen production technology using electrolysis (Osaka National Research Institute); Hydrogen production technology using high-temperature/high-pressure electrolysis (Showa Denko K.K., and 1 other); Hydrogen production technologies using thermochemical method (4 articles - Osaka National Research Institute; Tokyo National Research Institute; Hitachi, Ltd.; Mitsubishi Heavy Industries, Ltd.); Water decomposition by thermochemical and photochemical hybrid cycle (Yokohama National University); Hydrogen production technology using direct thermolysis (Electrotechnical Laboratory); Hydrogen solidification technology (2 articles - Osaka National Research Institute; Tokyo National Research Institute); Combustion technology (Osaka National Research Institute); Materials for fuel cells (Osaka National Research Institute); Manufacture of fuel cells (Electrotechnical Laboratory); Systematization of fuel cells (Electrotechnical Laboratory); Hydrogen-fueled engine (Mechanical Engineering Laboratory); Disaster prevention technologies for gaseous and liquid hydrogen, etc. (Tokyo National Research Institute); Prevention of embrittlement of materials used with hydrogen (Chugoku National Research Institute); Refining, transportation, and storage systems, and safety techniques for hydrogen (Industrial Research Institute); Hydrogen energy total system (Electrotechnical Laboratory); Comprehensive examination of hydrogen-using subsystems and peripheral technologies (Electrochemical Society of Japan, and 6 others). (NEDO)

  12. Theoretical and practical outline of the Copenhagen PACT narrative-based exercise counselling manual to promote physical activity in post-therapy cancer survivors.

    Science.gov (United States)

    Midtgaard, Julie

    2013-02-01

    Sedentary behaviour and reduced exercise capacity are potential persisting effects of anti-cancer therapy that may predispose to serious health conditions. It is well-established that physical exercise may prevent some of these problems. However, the extent to which cancer survivors are able to adopt long-term physical activity habits depends largely on their motivation. This theoretical paper aims to outline how researchers and practitioners can draw from Antonovsky's salutogenetic theory and White & Epston's Narrative Therapy to develop and implement intervention efforts centered on promotion of long-term physical activity behaviour, while at the same time increasing the individual cancer survivor's sense of meaning and personal health resources. The Copenhagen PACT (Physical Activity after Cancer Treatment) Study targeting adoption and maintenance of regular physical activity in post-therapy cancer survivors is briefly presented including a brief review of the theoretical rationale behind the psychological component of the intervention, i.e. a narrative-based exercise counselling programme. Subsequently, particular attention is given to the core principles, different components and structure of the counselling manual including sample questions and examples of written documents that have emanated from the individual counselling sessions. The discussion includes consideration of some methodological challenges that arise when attempting to evaluate narrative-based interventions in the context of physical activity promotion in cancer rehabilitation and survivorship care.

  13. A Comparative Study of Glasgow Coma Scale and Full Outline of Unresponsiveness Scores for Predicting Long-Term Outcome After Brain Injury.

    Science.gov (United States)

    McNett, Molly M; Amato, Shelly; Philippbar, Sue Ann

    2016-01-01

    The aim of this study was to compare predictive ability of hospital Glasgow Coma Scale (GCS) scores and scores obtained using a novel coma scoring tool (the Full Outline of Unresponsiveness [FOUR] scale) on long-term outcomes among patients with traumatic brain injury. Preliminary research of the FOUR scale suggests that it is comparable with GCS for predicting mortality and functional outcome at hospital discharge. No research has investigated relationships between coma scores and outcome 12 months postinjury. This is a prospective cohort study. Data were gathered on adult patients with traumatic brain injury admitted to urban level I trauma center. GCS and FOUR scores were assigned at 24 and 72 hours and at hospital discharge. Glasgow Outcome Scale scores were assigned at 6 and 12 months. The sample size was n = 107. Mean age was 53.5 (SD = ±21, range = 18-91) years. Spearman correlations were comparable and strongest among discharge GCS and FOUR scores and 12-month outcome (r = .73, p coma scores performed best for both tools, with GCS discharge scores predictive in multivariate models.

  14. Outline of operation and control system and analytical investigation of transient behavior of an out-of-pile hydrogen production system for HTTR heat utilization system

    International Nuclear Information System (INIS)

    Inagaki, Yoshiyuki; Hada, Kazuhiko; Nishihara, Tetsuo; Takeda, Tetsuaki; Haga, Katsuhiro; Hino, Ryutaro.

    1997-10-01

    The hydrogen production system by steam reforming of natural gas is to be constructed to demonstrate effectiveness of high-temperature nuclear heat utilization systems with the HTTR. Prior to coupling of the steam reforming system with the HTTR, an out-of-pile test system is planned to investigate the system characteristics, to develop high-temperature components such as a reformer, a high-temperature isolation valve and so on, and to verify operation and control technologies and safety technology at accidents. This paper presents outline of operation and control systems and analytical review of transient behavior of the out-of-pile hydrogen production system. Main function of the operation and control systems is made not to give disturbance to the HTTR at transient state under start-up and stop operations. The operation modes are separated into two ones, namely normal and accident operation modes, and operation sequences are made for each operation mode. The normal operation sequence includes start-up, steady operation and stop of the out-of-pile system. The accident one deals with accident conditions at which supply of feed gas is stopped and helium gas is cooled passively by the steam generator. Transient behavior of the out-of-pile system was analyzed numerically according as the operation sequences. As the results, it was confirmed that the designed operation and control systems are adequate to the out-of-pile system. (author)

  15. 17th Business Report Meeting of New Energy Industrial Technology Development Organization (NEDO). Outline of business; Dai 17 kai NEDO jigyo hokokukai. Gyomu gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-25

    This is a report on the 17th Business Report Meeting of NEDO held in September, 1997. In Chapter 1, NEDO's business activities were outlined in terms of new energy, industrial technology, coal policy, compensation for coal mine pollution, alcohol production, etc. In Chapter 2, described were NEDO's budget and account settlement. In Chapter 3, reported were the FY 1996 results of the development of new energy, that is, the development of solar energy utilization technology, geothermal resource development, development of geothermal energy utilization technology, development of coal energy utilization technology, development of coal resource, development of fuel/storage technology, development of hydrogen/alcohol/biomass technology, development of other petroleum substituting energy technology, project for promotion of new energy introduction, project on international energy policy, project on development/introduction survey, and project on information service by NEDO Information Center. In Chapter 4, as the FY 1996 results of the R and D of industrial technology, etc., described were R and D projects, medical/welfare equipment related project, R and D projects on environmental technology, and international industry technology related projects. In Chapters 5 and 6, stated was the coal related project. In Chapter 7, mentioned was the alcohol production project. (NEDO)

  16. A seismic refraction and wide-angle reflection exploration in 2002 on the Mizuho Plateau, East Antarctica-Outline of observations (JARE-43-

    Directory of Open Access Journals (Sweden)

    Hiroki Miyamachi

    2003-03-01

    Full Text Available A seismic refraction and wide-angle reflection exploration was successfully conducted along a profile crossing the JARE-41 seismic profile on the Mizuho Plateau, in East Antarctica, in the austral summer season of 2001-2002 (JARE-43. One hundred sixty-one seismic stations were temporarily installed along a profile about 151 km long and seven large shots with about 700 kg of dynamite were fired. In addition, one shot with charge size of 20 kg was also arranged along the profile. The obtained seismic records show the clear onsets of the first arrivals at distances of less than 100 km from each large shot. In particular, seismic waves traveling through the ice sheet and dispersed surface waves were clearly observed. Some later reflection phases were also detected. The obtained first travel time data show that the ice sheet is a two-layered structure consisting of an upper layer with a P wave velocity of 2.7-2.9 km/s and a lower layer of 3.7-3.9 km/s. The thickness of the upper layer is estimated to be about 36-45 m. The apparent velocity in the basement rock just beneath the ice sheet is 6.1-6.2 km/s in the central and southern parts of the profile and almost 5.9 km/s in the northern part. This report describes basic outlines of the exploration and the obtained seismic data.

  17. Invasive placenta previa: Placental bulge with distorted uterine outline and uterine serosal hypervascularity at 1.5T MRI - useful features for differentiating placenta percreta from placenta accreta.

    Science.gov (United States)

    Chen, Xin; Shan, Ruiqin; Zhao, Lianxin; Song, Qingxu; Zuo, Changting; Zhang, Xinjuan; Wang, Shanshan; Shi, Honglu; Gao, Fei; Qian, Tianyi; Wang, Guangbin; Limperopoulos, Catherine

    2018-02-01

    To characterise MRI features of invasive placenta previa and to identify specific features for differentiating placenta percreta (PP) from placenta accreta (PA). Forty-five women with PP and 93 women with PA who underwent 1.5T placental MRI were included. Two radiologists independently evaluated the MRI features of invasive placenta previa, including our novel type of placental bulge (i.e. placental bulge type-II, characterized by placental bulge with distorted uterine outline). Pearson's chi-squared or Fisher's two-sided exact test was performed to compare the MRI features between PP and PA. Logistic stepwise regression analysis and the area under the receiver operating characteristic curve (AUC) were performed to select the optimal features for differentiating PP from PA. Significant differences were found in nine MRI features between women with PP and those with PA (P Placental bulge type-II and uterine serosal hypervascularity were independently associated with PP (odds ratio = 48.618, P Placental bulge type-II and uterine serosal hypervascularity are useful MRI features for differentiating PP from PA. • Placental bulge type-II demonstrated the strongest independent association with PP. • Uterine serosal hypervascularity is a useful feature for differentiating PP from PA. • MRI features associated with abnormal vessels increase the risk of massive haemorrhage.

  18. Invasive placenta previa. Placental bulge with distorted uterine outline and uterine serosal hypervascularity at 1.5T MRI - useful features for differentiating placenta percreta from placenta accreta

    International Nuclear Information System (INIS)

    Chen, Xin; Zhang, Xinjuan; Wang, Shanshan; Shi, Honglu; Gao, Fei; Wang, Guangbin; Shan, Ruiqin; Zhao, Lianxin; Song, Qingxu; Zuo, Changting; Qian, Tianyi; Limperopoulos, Catherine

    2018-01-01

    To characterise MRI features of invasive placenta previa and to identify specific features for differentiating placenta percreta (PP) from placenta accreta (PA). Forty-five women with PP and 93 women with PA who underwent 1.5T placental MRI were included. Two radiologists independently evaluated the MRI features of invasive placenta previa, including our novel type of placental bulge (i.e. placental bulge type-II, characterized by placental bulge with distorted uterine outline). Pearson's chi-squared or Fisher's two-sided exact test was performed to compare the MRI features between PP and PA. Logistic stepwise regression analysis and the area under the receiver operating characteristic curve (AUC) were performed to select the optimal features for differentiating PP from PA. Significant differences were found in nine MRI features between women with PP and those with PA (P <0.05). Placental bulge type-II and uterine serosal hypervascularity were independently associated with PP (odds ratio = 48.618, P < 0.001; odds ratio = 4.165, P = 0.018 respectively), and the combination of the two MRI features to distinguish PP from PA yielded an AUC of 0.92 for its predictive performance. Placental bulge type-II and uterine serosal hypervascularity are useful MRI features for differentiating PP from PA. (orig.)

  19. Sulfur poisoning of Ni/Gadolinium-doped ceria anodes: A long-term study outlining stable solid oxide fuel cell operation

    Science.gov (United States)

    Riegraf, Matthias; Zekri, Atef; Knipper, Martin; Costa, Rémi; Schiller, Günter; Friedrich, K. Andreas

    2018-03-01

    This work presents an analysis of the long-term behavior of nickel/gadolinium-doped ceria (CGO) anode-based solid oxide fuel cells (SOFC) under sulfur poisoning conditions. A parameter study of sulfur-induced irreversible long-term degradation of commercial, high-performance single cells was carried out at 900 °C for different H2/N2/H2S fuel gas atmospheres, current densities and Ni/CGO anodes. The poisoning periods of the cells varied from 200 to 1500 h. The possibility of stable long-term Ni/CGO anode operation under sulfur exposure is established and the critical operating regime is outlined. Depending on the operating conditions, two degradation phenomena can be observed. Small degradation of the ohmic resistance was witnessed for sulfur exposure times of approximately 1000 h. Moreover, degradation of the anode charge transfer resistance was observed to be triggered by the combination of a small anodic potential step and high sulfur coverage on Ni. The microstructural evolution of altered Ni/CGO anodes was examined post-mortem by means of SEM and FIB/SEM, and is correlated to the anode performance degradation under critical operating conditions, establishing Ni depletion, porosity increase and a tripe phase boundary density decrease in the anode functional layer. It is shown that short-term sulfur poisoning behavior can be used to assess long-term stability.

  20. Concave switching in single-hop and multihop networks

    NARCIS (Netherlands)

    Walton, N.

    2015-01-01

    Switched queueing networks model wireless networks, input-queued switches, and numerous other networked communications systems. We consider an (\\(\\alpha ,g\\))-switch policy; these policies provide a generalization of the MaxWeight policies of Tassiulas and Ephremides (IEEE Trans Autom Control

  1. Two collateral problems in the framework of ground-penetrating radar data inversion: influence of the emitted waveform outline and radargram comparison.

    Science.gov (United States)

    Oliveira, Rui Jorge; Caldeira, Bento; Borges, José Fernando

    2017-04-01

    Obtain three-dimensional models of the physical properties of buried structures in the subsurface by inversion of GPR data is an appeal to Archaeology and a challenge to Geophysics. Along the research of solutions to resolve this issue stand out two major problems that need to be solved: 1) Establishment the basis of the computation that allows assign numerically in the synthetic radargrams, the physical conditions at which the GPR wave were generated; and 2) automatic comparison of the computed synthetic radargrams with the correspondent observed ones. The influence of the pulse shape in GPR data processing was a studied topic. The pulse outline emitted by GPR antennas was experimentally acquired and this information has been used in the deconvolution operation, carried out by iterative process, similarly the approach used in seismology to obtain the receiver functions. In order to establish the comparison between real and synthetic radargrams, were tested automatic image adjustment algorithms, which search the best fit between two radargramas and quantify their differences through the calculation of Normalized Root Mean Square Deviation (NRMSD). After the implementation of the last tests, the NRMSD between the synthetic and real data is about 19% (initially it was 29%). These procedures are essential to be able to perform an inversion of GPR data obtained in the field. Acknowledgment: This work is co-funded by the European Union through the European Regional Development Fund, included in the COMPETE 2020 (Operational Program Competitiveness and Internationalization) through the ICT project (UID/GEO/04683/2013) with the reference POCI-01-0145-FEDER-007690.

  2. Development of an analytic outline for the aflatoxins analysis in grains and flours; Desarrollo de un esquema analitico para el analisis de aflatoxinas en granos y harinas

    Energy Technology Data Exchange (ETDEWEB)

    Sibaja Adams, Roxana

    2000-07-01

    The instrumental and analytic conditions were optimized for the aflatoxine determination B1, B2, 1 and G2 in corn and peanut byl iquid chromatography of high discharge following the analyzing method AOAC 994,08. Besides, it was defined a function for evaluating the dependence of the chromatographic discharge with the aflatoxine concentration. The analyzing method was validated, and four calibration curves were obtained for the aflatoxine B1, B2, G1 and G2, which turned to have a heterocedastico behavior. The applicability of this method was demonstrated, obtaining imagines of appropriate merit and comparable with those reported by the AOAC. Additionally, the applicability of the chromatographic method was demonstrated in fine layer for the presumptive analysis of aflatoxine, allowing both methods to propose an outline of reliable analysis of real samples. [Spanish] Se optimizaron las condiciones instrumentales y analiticas para la determinacion de aflatoxinas B1, B2, G1 y G2 en maiz y mani por Cromatografia liquida de alto desempeno siguiendo el metodo de analisis AOAC 994,08. Ademas, se definio una funcion para evaluar la dependencia del desempeno cromatografico con la concentracion de aflatoxinas.Se valido el metodo de analisis y se obtuvieron las cuatro curvas de calibracion para las aflatoxinas B1, B2, G1 y G2, las que resultaron tener un comportamiento heterocedastico. Se demostro la aplicabilidad del metodo, obteniendose figuras de merito adecuadas y comparables con las reportadas por el AOAC.Adicionalmente, se demostro la aplicabilidad del metodo de cromatografia en capa fina para el analisis presuntivo de aflatoxinas, permitiendo ambos metodos proponer un esquema de analisis confiable de muestras reales.

  3. On an outline of investigation results of earthquake damage estimation for Akita prefecture; Akitaken jishin higai sotei chosa kekka no gaiyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nogoshi, M [Akita University, Akita (Japan). College of Education

    1997-05-27

    This paper reports an outline of investigation results of earthquake damage estimation carried out in Akita Prefecture. The basic policy for this investigation consists of the following: (1) an indication on existence of a blank area in the Akita off-coast earthquake shall be viewed so importantly that a fault model is set to estimate damages; (2) because most of the earthquakes in history of Akita Prefecture are inland earthquakes with magnitude of about M=7, four earthquakes in the past shall be adopted as the set model; and (3) the central Sea of Japan earthquake in 1983 was an earthquake occurred in the Sea of Japan side and caused a great deal of damages to Akita Prefecture, and its epicenter model and damages were investigated in detail, hence these data shall be utilized in verifying the procedure and method for estimating damages studied in the present investigation. This paper reports finally estimated human damages. With an assumed earthquake as strong as the Tencho earthquake in the year of 830, more than 1000 deaths will occur in the city of Akita; with an earthquake in the scale of the Noshiro earthquake in 1694, more than 50 deaths will be counted in the city of Noshiro; one as strong as the Rikuu earthquake in 1896 will cause about 300 deaths in the cities of Yokote and Omagari, respectively; one with the scale of the 1914 Goushu earthquake will result in about 300 people to be killed in the city of Omagari and about 200 people in the city of Yuzawa; and an earthquake estimated to occur in the blank area off the Akita coast will force 33% of the residents of the Kisakata town to be evacuated from their homes. 1 fig.

  4. A comparison of the Full Outline of UnResponsiveness (FOUR) score and Glasgow Coma Score (GCS) in predictive modelling in traumatic brain injury.

    Science.gov (United States)

    Kasprowicz, Magdalena; Burzynska, Malgorzata; Melcer, Tomasz; Kübler, Andrzej

    2016-01-01

    To compare the performance of multivariate predictive models incorporating either the Full Outline of UnResponsiveness (FOUR) score or Glasgow Coma Score (GCS) in order to test whether substituting GCS with the FOUR score in predictive models for outcome in patients after TBI is beneficial. A total of 162 TBI patients were prospectively enrolled in the study. Stepwise logistic regression analysis was conducted to compare the prediction of (1) in-ICU mortality and (2) unfavourable outcome at 3 months post-injury using as predictors either the FOUR score or GCS along with other factors that may affect patient outcome. The areas under the ROC curves (AUCs) were used to compare the discriminant ability and predictive power of the models. The internal validation was performed with bootstrap technique and expressed as accuracy rate (AcR). The FOUR score, age, the CT Rotterdam score, systolic ABP and being placed on ventilator within day one (model 1: AUC: 0.906 ± 0.024; AcR: 80.3 ± 4.8%) performed equally well in predicting in-ICU mortality as the combination of GCS with the same set of predictors plus pupil reactivity (model 2: AUC: 0.913 ± 0.022; AcR: 81.1 ± 4.8%). The CT Rotterdam score, age and either the FOUR score (model 3) or GCS (model 4) equally well predicted unfavourable outcome at 3 months post-injury (AUC: 0.852 ± 0.037 vs. 0.866 ± 0.034; AcR: 72.3 ± 6.6% vs. 71.9%±6.6%, respectively). Adding the FOUR score or GCS at discharge from ICU to predictive models for unfavourable outcome increased significantly their performances (AUC: 0.895 ± 0.029, p = 0.05; AcR: 76.1 ± 6.5%; p model 3; and AUC: 0.918 ± 0.025, p model 4), but there was no benefit from substituting GCS with the FOUR score. Results showed that FOUR score and GCS perform equally well in multivariate predictive modelling in TBI.

  5. Outline of the report on the seismic safety examination of nuclear facilities based on the 1995 Hyogoken-Nanbu earthquake (tentative translation) - September 1995

    International Nuclear Information System (INIS)

    2003-01-01

    From the standpoint of thoroughly confirming the seismic safety of nuclear facilities, Nuclear Safety Commission established an Examination Committee on the Seismic Safety of Nuclear Power Reactor Facilities (hereinafter called Seismic Safety Examination Committee) based on the 1995 Hyogoken-Nanbu Earthquake on January 19, 1995, two days after the occurrence of the earthquake, in order to examine the validity of related guidelines on the seismic design to be used for the safety examination. This report outlines the results of the examinations by the Seismic Safety Examination Committee: basic principle of examinations at the seismic safety examination committee, overview on the related guidelines of the seismic design, information and knowledge obtained on the 1995 Hyogoken-Nanbu earthquake, examination of validity of the guidelines based on various information of the Hyogoken-Nanbu earthquake. The Seismic Design Examination Committee surveyed the related guidelines on seismic design, selected the items to be examined, and examined on those items based on the knowledge obtained from the Hyogoken-Nanbu Earthquake. As a result, the Committee confirmed that the validity of the guidelines regulating the seismic design of nuclear facilities is not impaired even though on the basis of the Hyogoken-Nanbu Earthquake. However, the people related to the nuclear facilities may not be content with the above result, but continuously put efforts in doing the following matters to improve furthermore the reliability of seismic design of nuclear facilities by always reflecting the latest knowledge on the seismic design. 1) - The people related to nuclear facilities must seriously accept the fact that valuable knowledge could be obtained from the Hyogoken-Nanbu Earthquake, try to study and analyze the obtained data, and reflect the results of investigations, studies, and examinations conducted appropriately to the seismic design of nuclear facilities referring to the investigations

  6. SU-F-P-29: Impact of Oral Contrast Agent for Assisting in Outlining Small Intestine On Pelvic IMAT Dose in Patients with Cervical Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, R; Bai, W; Fan, X [The Fourth Hospital of Hebei Medical University, Shijiazhuang, Hebei (China)

    2016-06-15

    Purpose: As the advanced intensity modulated arc therapy(IMAT) delivery systems becoming a main role of treatment ways, which places even greater demands on delivering accuracy. The impact of oral contrast agent (meglumine diatrizoate) for assisting in outlining the small intestine on pelvic IMAT dose in patients with cervical cancer was investigated. Methods: Ten cervical cancer patients for postoperative radiotherapy underwent CT scans, and the planning target volumes (PTV) and organs at risk (including the small intestine, rectum, bladder, colon and the left and right femoral head) were contoured. The IMAT plans were generated on Oncentra v4.1 planning system for each case, PTV was prescribed to 50.4 Gy in 28 fractions. Then another plan was generated by re-calculating the radiation dose after changing the electron density of the small bowel. The first plan (plan A) was the conventional IMAT plan (with oral contrast agent), and the second one (plan B) specified the electron density of the small bowel (without oral contrast agent). Paired t-test was used to compare the dose distribution between the two plans. Results: The PTV’s D2, D50, D95, V110, conformity index, and homogeneity index of plans A and B were 5610.5 vs. 5611.4 cGy (P=0.175), 5348.5 vs. 5348.0 cGy (P=0.869), 5039 vs. 5042.3 (P=0.518), 6.0% vs. 6.1 %( P=0.886), 0.1269 vs. 0.1271 (P=0.34) and 0.8421 vs. 0.8416 (P=0.598), respectively. The volumes of the small bowel receiving at least 30 Gy (V30) and the minimum dose of 2% volume accepted (D2) for plans A and B were 31.6% vs. 31.9% (P=0.371) and 5067.8 vs. 5085.4 cGy (P=0.377), while rectum V50 of the two plans was 12.4% vs. 12.1% (P=0.489). Conclusion: The oral contrast agent (meglumine diatrizoate) filling the small intestine does not lead to a significant increase in the pelvic IMAT dose in patients with cervical cancer.

  7. The evaluation outline to 'root cause analysis report (revision) of the event which the penetration hole generated by the main exhaust pipe duct of the reprocessing plant' reported by Japan Atomic Energy Agency

    International Nuclear Information System (INIS)

    2013-06-01

    JNES evaluated the report which JAEA presented in October 2012 at the Nuclear Regulation Authority on the root cause analysis regarding the penetration hole on the main exhaust pipe duct in the JAEA reprocessing plant. The evaluation of the root cause analysis was done based on the guideline of the Regulation Authority evaluating the root cause analysis carried out by the enterprise side and concluded that the evaluation extending as to JAEA's organizational system was effective as a countermeasure for a recurrence, the present report representing the outline of the evaluation. (S. Ohno)

  8. Math 3310--Technical Mathematics I. Course Outline.

    Science.gov (United States)

    New York Inst. of Tech., Old Westbury.

    This document contains the course syllabus and 12 independent practice modules for a college pre-calculus designed as the first course in a two-semester sequence for students in a Bachelor of Technology program. The course emphasizes engineering technology applications and verbal problems. Topics include a review of elementary algebra; factoring…

  9. Math 3007--Developmental Mathematics I. Course Outline.

    Science.gov (United States)

    New York Inst. of Tech., Old Westbury.

    This document contains the course syllabus and 12 independent practice modules for an introductory college algebra course designed to develop student proficiency in the basic algebraic skills. This course is designed as the first of a two-semester sequence. Topics include operations with signed numbers; simple operations on monomials and…

  10. Math 3008--Developmental Mathematics II. Course Outline.

    Science.gov (United States)

    New York Inst. of Tech., Old Westbury.

    This document contains the course syllabus and 12 independent practice modules for an introductory college algebra course designed to develop student proficiency in the basic algebraic skills. This is designed as the second of a two-semester sequence. Topics include performing operations with radicals and exponents; learning to solve equations;…

  11. An Outline Course on Human Performance Modeling

    Science.gov (United States)

    2006-01-01

    50. no pude conectarme al chat. La red de la universidad no tenia acctivado el servicio 51. It seemed like the queue was full 52. The audience...University 87. University of Virginia 88. Department of Mathematical Sciences UNLV 89. Micro Analysis & Design 0. universidad del sinu 91. SBC

  12. Outline of geothermal power generation in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Ezaki, Y

    1960-01-01

    The utilization of geothermal energy in electrical power generation throughout the world is described. Details of generating capacity and cost are given for Larderello, Italy; Wairakei, New Zealand: and the Geysers, USA. In Japan three types of conversion systems are used. These include the direct use of steam, direct use of hot water and binary fluid type systems. The history of Japanese investigation and exploitation of geothermal energy is reviewed and the status of the Matsukawa, Hakone, Otake and Takenoyu geothermal power plants is discussed. It is recommended that laws be enacted in Japan to encourage the development of this form of energy conversion.

  13. A demographic outline / Kalev Katus, Allan Puur

    Index Scriptorium Estoniae

    Katus, Kalev, 1955-2008

    2002-01-01

    Ajalooline ülevaade Eesti elanikkonna kujunemisest ning Eestit läbinud migratsioonivoogudest Nõukogude okupatsiooni perioodil, mis on suuresti mõjutanud Eesti tänast demograafilist olukorda. Tabel ja diagrammid: Eestlaste ja välismaalaste arv Eestis 1922-2000; Välismaalaste osakaal Eestis päritolumaa järgi; Rahvusvahelised migratsioonivood Eestis 1946-1999; Välismaalaste osakaal valitud Euroopa riikides. Kaart.

  14. Outline of metabolic diseases in adult neurology.

    Science.gov (United States)

    Mochel, F

    2015-01-01

    Inborn errors of metabolism (IEM) are traditionally defined by enzymatic deficiencies or defects in proteins involved in cellular metabolism. Historically discovered and characterized in children, a growing number of IEM are described in adults, and especially in the field of neurology. In daily practice, it is important to recognize emergency situations as well as neurodegenerative diseases for which a metabolic disease is likely, especially when therapeutic interventions are available. Here, the goal is to provide simple clinical, imaging and biochemical tools that can first orientate towards and then confirm the diagnosis of IEM. General guidelines are presented to treat the most common IEM during metabolic crises - acute encephalopathies with increased plasma ammonia, lactate or homocystein, as well as rhabdomyolysis. Examples of therapeutic strategies currently applied to chronic neurometabolic diseases are also provided - GLUT1 deficiency, adrenoleukodystrophy, cerebrotendinous xanthomatosis, Niemann-Pick type C and Wilson disease. Genetic counseling is mandatory in some X-linked diseases - ornithine transcarbamylase deficiency and adrenoleukodystrophy - and recommended in maternally inherited mitochondrial diseases - mutations of mitochondrial DNA. Besides these practical considerations, the contribution of metabolism to the field of adult neurology and neurosciences is much greater: first, with the identification of blood biomarkers that are progressively changing our diagnostic strategies thanks to lipidomic approaches, as illustrated in the field of spastic paraplegia and atypical psychiatric presentations; and second, through the understanding of pathophysiological mechanisms involved in common neurological diseases thanks to the study of these rare diseases. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  15. Challenging power and meaning: outlining the popular ...

    African Journals Online (AJOL)

    The concept reflects popular concerns over the outcomes of the epidemic rather than its cause, being more concerned about the fate of individuals and communities than about issues of morality. Later, the moral construction of 'Slim' that accompanied the biomedical categorisation of AIDS as a sexually transmitted disease ...

  16. Emergency response packaging: A conceptual outline

    International Nuclear Information System (INIS)

    Luna, R.E.; McClure, J.D.; Bennett, P.C.; Wheeler, T.A.

    1991-01-01

    The main thrust of this paper has been to put forth the idea of developing a package for the recovery and retrieval of released radioactive material contents from Radioactive Materials (RAM) packaging involved in transport accidents. Prior to the development of such a package, some additional studies might be performed which would confirm the general type of candidate materials which might have to be recovered. This would require a detailed inventory of US packages that have released their contents due to transport accidents. The main issue is one of preparedness which would allow the US Department of Energy to respond to accidents for DOE shipments and to respond nationally for shipments outside the normal jurisdiction of US DOE shipments

  17. EPR: outlines of research and development

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    The articles give an overview of the research and development presently under way for the future pressurized water reactors to be constructed in Europe, and particularly the French and German EPR (European Pressurized Reactor). Such an analysis deals essentially with respect to the pressurized water reactors now in operation. (author)

  18. Kanto Asperity Project -Background and Outline-

    Science.gov (United States)

    Kobayashi, R.; Yamamoto, Y.; Sato, T.; Shishikura, M.; Curewitz, D.

    2009-12-01

    The Kanto region (Tokyo and the surrounding area) is one of the most densely populated urban areas in the world and has been devastated by repeated great earthquakes. This region is located at an island arc-island arc collision zone and a zone where Pacific and Philippine Sea plates are subducting. Great earthquakes along the Sagami trough, where the Philippine Sea slab is subducting, have repeatedly occurred. The 1703 Genroku and 1923 (Taisho) Kanto earthquakes caused severe damages in the metropolitan area. The recurrence periods of Taisho- and Genroku-type earthquakes are about 200-400 and 2000 years, respectively (e.g., Earthquake Research Committee, 2004). Many studies on the asperities along the Sagami trough have been carried out. Two asperities of the 1923 Kanto earthquake are located around the western part of Kanagawa prefecture (the base of the Izu peninsula) and around the Miura peninsula. An additional asperity of the 1703 Genroku earthquake is located the southern part of the Boso Peninsula. Slow slip events have also repeatedly occurred in an area adjacent to the asperities of the great earthquakes, off Boso peninsula (e.g., Ozawa et al 2007). In the cases of Nankai and Cascadia, slow slip events occur at deeper levels than the asperities, in a transition zone between the asperity and a region of steady slip. In contrast, slow slip events in the Kanto region have occurred at relatively shallow depths, at the same level as the asperity, raising the possibiltiy of friction controlled by different conditions (materials, fluid, or surface roughness) to those (temperature and pressure) encountered at Nankai and Cascadia. Deep seismic profiling have been carried out since the Special Project for Earthquake Disaster Mitigation in Urban areas (DaiDaiToku) (2002-2006). These profiling successfully presented a new image of the upper surface of the Philippine Sea slab (Sato et al. 2005), which is shallower than the previous models. This profiling also presents that amplitudes of reflections are different between in the asperity and non-asperity regions, suggesting the different characteristics on the plate boundaries in these regions. The Kanto Asperity Project (KAP) have been submitted to IODP to know the geometry, physical properties, and tectonics along the Sagami trough, which are considered to control the occurrence of the great earthquakes and slow slips. The KAP consists of three research components. The first component is shallow drilling, coring, and logging at several sites distributed in wide area for the combined purposes of geological characterization (sediments, basements, and faults), tectonic reconstruction (collision, accretion, and rotation), earthquake history inferred from sediments, and in situ stress measurements. The second is long-term geophysical monitoring with wide area network, focusing on understanding the geometrical and geophysical situation of the system of asperities and non-asperities. The third one is coring and logging plate boundaries in asperity and slow slip regions to measure physical properties. Information obtained in this plan may be effective to modify simulations of earthquake cycles, strong motion, and tsunamis for seismic hazard assessment.

  19. Outlining the benefits of Strategic Networking

    Directory of Open Access Journals (Sweden)

    Eva Maria Eckenhofer

    2011-10-01

    Full Text Available Social Networks have attracted enormous interest in the scientific community in recent years. The characteristics, components and impacts of social networks have been studied through different kinds of aspects, such as sociological, geographical, ethnological, political and economical. In economics social network studies have been performed on intra- and inter-organizational levels, though rarely simultaneously. Furthermore the strategic aspects of fostering and controlling informal organizational networks as well as the outcomes of these managerial attempts on the network characteristics and the performance of the organization have not been sufficiently studied yet. However, the need to develop, foster and manage networks efficiently is given for preventing negative effects and provoking positive ones. Therefore this study contributes to scientific theory and practical business development by exploring the influence of Strategic Networking in inter- as well as intra-organizational business-fields. For study the author develops and defines Strategic Networking as the strategic and target-oriented analysis, development, fostering and control of (inter- as well as intra-organizational networks on the basis of trust, with the intention to reach certain (organizational goals and tests its applicability and effects in an extensive survey on three levels: intra-, inter-organizational and regional networks (cluster. The survey showed that Strategic Networking goes in line with favourable network characteristics as well as the success of a firm in terms of financial and non-financial performance measures.

  20. Theoretical Outline about Cooperative Entrepreneurial Management System

    Directory of Open Access Journals (Sweden)

    Angie Fernández Lorenzo

    2015-12-01

    Full Text Available The essence of Cooperativism prints some particular characters to the cooperatives management process, especially the need to integrate the technical, economic and social edges in shaping and improving its. Considering that documented precedent studies have not led to analyze the whole process of cooperative management, but only to solve problems in specific subsystems, in this paper we the theoretical fundaments of Cooperatives Business Management System, under the criteria of integrity and balance between these edges, which is the basis for the proposal of functional subsystems to ensure the whole cooperatives performance.