WorldWideScience

Sample records for con clavos flexibles

  1. Fracturas de clavícula. Tratamiento quirúrgico con clavos intramedulares flexibles

    Directory of Open Access Journals (Sweden)

    Roberto Joaquín Del Gordo D'amato

    2014-05-01

    Full Text Available Se realizó un estudio de tipo descriptivo en una serie de casos en el cual se presentan los resultados de 12 fracturas de clavícula tratadas en forma quirúrgica mediante clavos intramedulares flexibles. Todos los pacientes fueron tratados por los autores en la Clínica El Prado del D.T.C.H. de la Ciudad de Santa Marta mediante reducción cerrada bajo control radioscópico. Presentando resultados excelentes y buenos en todos los casos. Así mismo, se evidenció consolidación clínica a las cuatro semanas con reintegro a la vida laboral alrededor de las seis semanas. Todos los pacientes mostraron alto grado de satisfacción con el resultado obtenido. Se concluye que el tratamiento empleado es una alternativa terapéutica a tener en cuenta en aquellas fracturas desplazadas, sean estas del tercio externo, medio o interno que permite consolidación sin las complicaciones que con alguna frecuencia se presentan con el tratamiento conservador. (Duazary 2006; 2:115-120

  2. Osteosíntesis con clavos flexibles intramedulares retrógrados para el manejo de las fracturas diafisiarias del fémur en niños entre 6-12 años

    Directory of Open Access Journals (Sweden)

    Alejandro Uribe Ríos

    2005-02-01

    Full Text Available En el Hospital Universitario San Vicente de Paúl (HUSVP de Medellín, Colombia, se realizó un estudio observacional descriptivo y prospectivo tipo serie de casos, de fracturas diafisiarias del fémur en niños entre 6 y 12 años tratadas con clavos flexibles intramedulares de acero. Se trataron 70 pacientes en el período comprendido entre mayo de 2000 y 1 de enero de 2004. Se revisaron los pacientes y las radiografías en el servicio de consulta externa del Hospital Infantil del HUSVP con un seguimiento mínimo de 6 meses. La mayoría de los 70 pacientes eran del sexo masculino (74%, el mecanismo más frecuente de trauma fue el accidente de tránsito (66%, el promedio de edad fue de 8.3 años, el promedio de estancia hospitalaria fue de 7.8 días atribuible a causas administrativas y a presentar traumas asociados. A 59 pacientes se les retiraron los clavos en un tiempo promedio de 5.1 meses, sin complicaciones; los 11 restantes todavía tienen el material de osteosíntesis en el momento del análisis. Se encontraron 3 pacientes con discrepancia de longitud a expensas de la extremidad fracturada y 2 con deformidad angular; ninguno de ellos, hasta la fecha, ha requerido tratamiento médico o quirúrgico adicional. Los resultados de esta técnica, relativamente nueva en Medellín, Colombia, son alentadores; además, en este proyecto participaron 15 ortopedistas lo que muestra la facilidad de la técnica, con la que hemos obtenido resultados tan buenos como los reportados en la literatura mundial.

  3. Tratamiento quirúrgico con clavo intramedular elástico estable en fracturas diafisiarias del antebrazo en niños.

    Directory of Open Access Journals (Sweden)

    Francisco Vera Rosas

    2009-07-01

    Full Text Available Objetivo: Evaluar los resultados del tratamiento quirúrgico de las fracturas diafisiarias del radio y/o cubito mediante la colocación intramedular de clavos Kirschner moldeados en pacientes pediátricos. Material y métodos: Estudio descriptivo observacional de pacientes tratados con clavo intramedular en fracturas diafisiarias de antebrazo en el Hospital Nacional Cayetano Heredia - Lima. Se usaron clavos Kirschner moldeado de acuerdo a especificaciones del clavo ESIN y se evaluaron la técnica operatoria, tiempo de consolidación, complicaciones y funcionalidad. Resultados: Se incluyeron 12 pacientes, 10 de sexo masculino, con edad promedio de 13.7 años (11 a 15 años, se encontró evidencia de consolidación a las seis semanas y el tiempo operatorio promedio fue de 75 minutos. Un paciente presentó parestesias del nervio cubital que remitió a los 4 meses, la perdida sanguínea fue mínima con un abordaje minimamente invasivo. Todas las fracturas consolidaron. Conclusión: El uso de clavo Kirschner moldeado es una alternativa de tratamiento en este tipo de fracturas debido a su bajo costo, y resultados comparables con el ESIN que es el tratamiento de elección. (Rev Med Hered 2009;20:151-155.

  4. Fracturas de tibia: tratamiento con clavo intramedular no fresado (UTN. Experiencia en el Hospital Nacional Cayetano Heredia

    Directory of Open Access Journals (Sweden)

    Carlos Ruiz Semba

    2004-04-01

    Full Text Available Objetivo: Determinar la utilidad del uso del clavo sólido intramedular no fresado (UTN en el tratamiento de las fracturas diafisiarias de tibia cerradas, expuestas y en seudoartrosis. Material y métodos: Se realizó un estudio de cohorte prospectivo y longitudinal en 12 pacientes con fractura diafisiaria de tibia tratados en el servicio de traumatología del Hospital Nacional Cayetano Heredia desde febrero 2000 hasta junio del 2001. La técnica usada para colocar el UTN fue la descrita en el Manual de Técnicas Quirúrgicas de la AO. El tiempo de seguimiento total fue de 1 año. Resultados: La consolidación con el uso de este clavo se dio en promedio a las 16 semanas, no presentándose ningún caso de no unión. A pesar de que algunos de nuestros pacientes presentaron lesiones en piel y tejidos blandos, no observamos infecciones superficiales ni profundas. Por otro lado el movimiento de la rodilla, tobillo y articulación subtalar, se inicio en el postoperatorio inmediato, logrando los pacientes hasta el momento un rango articular normal. Conclusiones: El Clavo Intramedular no fresado, es una buena alternativa en el tratamiento quirúrgico de las fracturas diafisiarias de tibia tanto cerradas y expuestas de Iº grado, así como en seudoartrosis, debido a todas las ventajas y buenos resultados obtenidos.(Rev Med Hered 2004; 15:70-75.

  5. Tratamiento de las fracturas mediodiafisarias y del tercio distal del fémur con clavo endomedular retrógrado. [Retrograde ­intramedullary­ nailing­ for ­the­ treatment­ of­ shaft ­and­ distal ­third­ femoral­ fractures

    Directory of Open Access Journals (Sweden)

    Jorge L. Plos

    2015-01-01

    Full Text Available In­tro­duc­ción: Este trabajo analiza los resultados del enclavado endomedular retrógrado para tratar las fracturas mediodiafisarias y del tercio distal del fémur, en pacientes politraumatizados, obesos y de edad avanzada. Materiales­ y­ Métodos: De 2002 a 2009, se trataron 21 fracturas, con un seguimiento promedio de 27 meses, 2 pacientes no completaron el seguimiento mínimo. La edad promedio fue de 58.9 años, 10 pacientes eran politraumatizados y 5, obesos. Doce de los 19 tenían >65 años. La cirugía se practicó en mesa radiolúcida estándar, sin accesorios de tracción. El abordaje fue intraarticular intercondíleo. Resultados: Se logró la consolidación de las fracturas en 18 pacientes (98,74% entre los 4 y 6 meses del posoperatorio. Un paciente presentó retraso de consolidación y fue tratado con nueva cirugía para recambio del clavo. No hubo infección en el sitio quirúrgico; 16 pacientes (84,21% recuperaron la actividad funcional previa al accidente. Conclusiones:­ El enclavado endomedular retrógrado es una terapéutica válida en enfermos politraumatizados, pacientes obesos y adultos mayores, pues aplica la eficacia de los clavos endomedulares, con menor complejidad en el desarrollo de la técnica quirúrgica. Aún queda por estudiar la evolución a largo plazo del abordaje intraarticular intercondíleo.

  6. Fracturas perimplante de fémur tratadas con clavo retrógrado: reporte de un caso y descripción de la técnica quirúrgica.

    Directory of Open Access Journals (Sweden)

    Pablo Ariel Slullitel

    2016-02-01

    Full Text Available Existe un riesgo tácito de fractura peri-implante de fémur en pacientes con antecedente de fractura pertrocantérica de fémur tratados con tornillos deslizantes de cadera (TDC debido al aumento de la expectativa de vida y a las múltiples comorbilidades. Diversas opciones terapéuticas son posibles dependiendo de si se mantiene la osteosíntesis previa o no. Dada la baja prevalencia de estas fracturas, no existe consenso en la bibliografía actual sobre el tratamiento ideal. El objetivo de este trabajo es reportar un caso y describir la técnica quirúrgica de enclavado endomedular retrógrado para el tratamiento de fracturas peri-implante debajo de un TDC.

  7. MODELADO CON REDES DE PETRI E IMPLEMENTACIÓN CON GRAFCET DE UN SISTEMA DE MANUFACTURA FLEXIBLE CON PROCESOS CONCURRENTES Y RECURSOS COMPARTIDOS

    OpenAIRE

    Johanna Stella Castellanos Arias; Leonardo Enrique Solaque Guzmán

    2010-01-01

    En este trabajo, se presenta el modelado de un Sistema de Manufactura Flexible (SMF), con procesos concurrentes y recursos compartidos mediante Sistemas a Eventos Discretos (SED), específicamente Redes de Petri (RdP), y GRAFCET. El SMF se plantea como un modelo hipotético que se modela con una RdP con el objeto de identificar su dinámica y hallar la secuencia óptima de funcionamiento del sistema. Se desarrolló un modelo matemático que permite estimar el vector de tiempo acumulado de un proces...

  8. Simulación de un sistema de manufactura flexible con redes de Petri coloreadas

    Directory of Open Access Journals (Sweden)

    Luis Diego Murillo Soto

    2010-10-01

    Full Text Available Una forma de estudiar un sistema de manufactura flexible es por medio de un modelo del sistema y someterlo a un simulacro para observar sus índices de comportamiento, gráficas, etc. Siguiendo esta pauta, el presente trabajo plantea la simulación de una línea de producción con tres máquinas, dos robots y tres tipos de productos distintos. Con dicho sistema se desea obtener, en forma automática, porcentajes del uso de las máquinas, tamaño promedio de las colas, gráficas del comportamiento de las colas y el diagrama Gantt. El modelado de la línea de producción se realizó con Redes de Petri Coloreadas (RdPC y su implementación se realizó con la herramienta CPNTool.

  9. Comportamiento de una pista experimental de pavimento flexible con base estabilizada con cal Behavior of an experimental track of flexible pavement with lime stabilized base

    Directory of Open Access Journals (Sweden)

    César Augusto Hidalgo Montoya

    2010-01-01

    Full Text Available En este trabajo se presentan resultados de una investigación realizada para determinar las propiedades de deformabilidad de bases estabilizadas con cal a partir de ensayos de campo no destructivos. Se realizaron ensayos de placa estática y viga Benkelman en un tramo de prueba de pavimento flexible de 70m de longitud. Se usaron diferentes mezclas de suelo-cal y varios espesores de la estructura para evaluar el comportamiento del pavimento. A partir de los resultados de estos ensayos fueron realizados retroanálisis del comportamiento del pavimento. El método de los elementos finitos y el modelo elástico de esfuerzos y deformaciones en sistema de capas múltiples se usaron en los retroanálisis para estimar los módulos de deformabilidad de la base estabilizada con cal. Se concluye que la adición de cal mejora sustancialmente las propiedades de los pavimentos evaluados.This paper presents results of a research carried out to determine the proprieties of deformation of lime stabilized bases using non destructive field tests. Static plate tests and Benkelman beam tests were made on an experimental track of flexible pavement of 70 m length. Several mixtures of soil-lime and several thickness of the stabilized base were used to evaluate the behavior of the pavement. With the results of these tests, back analysis of the behavior of pavement was carried out. The finite elements method and the elastic stress and strain in a multi layers system were used to estimate the deformation modulus of the lime stabilized bases. It is concluded that the lime addition significantly improves the properties of evaluated pavements.

  10. MODELADO CON REDES DE PETRI E IMPLEMENTACIÓN CON GRAFCET DE UN SISTEMA DE MANUFACTURA FLEXIBLE CON PROCESOS CONCURRENTES Y RECURSOS COMPARTIDOS

    Directory of Open Access Journals (Sweden)

    Johanna Stella Castellanos Arias

    2010-01-01

    Full Text Available En este trabajo, se presenta el modelado de un Sistema de Manufactura Flexible (SMF, con procesos concurrentes y recursos compartidos mediante Sistemas a Eventos Discretos (SED, específicamente Redes de Petri (RdP, y GRAFCET. El SMF se plantea como un modelo hipotético que se modela con una RdP con el objeto de identificar su dinámica y hallar la secuencia óptima de funcionamiento del sistema. Se desarrolló un modelo matemático que permite estimar el vector de tiempo acumulado de un proceso modelado mediante una RdP, el cual constituye la base para hallar la mejor secuencia posible del sistema modelado. Por último, se realizó una implementación en el Laboratorio de Automatización de la Universidad Militar Nueva Granada, que simula el funcionamiento del SMF modelado por un montaje electrohidroneumático controlado con GRAFCET mediante PLC.

  11. Flexibility.

    Science.gov (United States)

    Humphrey, L. Dennis

    1981-01-01

    Flexibility is an important aspect of all sports and recreational activities. Flexibility can be developed and maintained by stretching exercises. Exercises designed to develop flexibility in ankle joints, knees, hips, and the lower back are presented. (JN)

  12. Evaluación de la capacidad conservante de los aceites esenciales de clavo (syzygium aromaticum) y canela (cinnamomum verum), sobre la levadura (rhodotorula mucilaginosa) en leche chocolatada

    OpenAIRE

    Castaño Sepúlveda, María Victoria

    2013-01-01

    Resumen: Los aceites esenciales (AE) son mezclas homogéneas de sustancias orgánicas provenientes de una misma familia química, terpenos y sus compuestos oxigenados. Tienen la propiedad común de generar diversos aromas agradables y perceptibles al ser humano, algunos presentan propiedades antimicrobianas. El clavo (Syzygium aromaticum) y la canela (Cinnamomum verum) son especias muy utilizadas en gastronomía y medicina natural, evaluados durante las últimas décadas por su uso potencial como co...

  13. Experiencias en el desarrollo de una aplicación robótica con control de fuerza para taladrado de huesos

    OpenAIRE

    J.C. Fraile; J. Pérez-Turiel; J.L. González-Sánchez; J. López-Cruzado; J.L. Rodríguez

    2008-01-01

    Resumen: En los sistemas de cirugía ortopédica asistida por ordenador (CAOS), el taladrado del hueso en la reparación de fracturas de huesos largos (para estabilizarlos con placas, clavos o tornillos) es una tarea compleja que el cirujano debe realizar con gran precisión, evitando el calentamiento excesivo del tejido óseo. En la cirugía asistida por robots, se han utilizado principalmente robots industriales (Robodoc, Caspar, Crigos) adaptados a ambientes quirúrgicos para ayudar al cirujano e...

  14. Caracterización de una nueva membrana cerámica de microfiltración con soporte de tejido en acero inoxidable flexible

    Directory of Open Access Journals (Sweden)

    Palacio, L.

    1999-04-01

    Full Text Available In this work we present the characterization of a ceramic flexible membrane, made by SynthesechemieⓇ, with a nominal pore size of 0.45 μm. This membrane consists in an α-alúmina porous support which has an embedded stainless steel metallic network, onto what a selective layer of titanium dioxide has been deposited. Membrane characterization has been realized with the aid of several techniques as: atomic force microscopy (AFM, air-liquid displacemente porosimetry and mercury porosimetry. Each tecnique giving information on different aspects: surface characteristics, bulk pores and active pores. Although the total pore size distribution is rather broad, the active pores (those opened to flux present a narrow distribution with a mean pore size very close to the manufacturer nominal value.

    En este trabajo se ha abordado la caracterización de una membrana cerámica de microfiltración flexible, fabricada por SynthesechemieⓇ con tamaño de poro nominal de 0.45 μm. Ésta consiste en un soporte poroso de α-alúmina que posee un armazón formado por una red metálica de acero inoxidable sobre el cual existe una capa selectiva de óxido de titanio. La caracterización de la membrana ha sido realizada con diversas técnicas como: microscopia de fuerza atómica (AFM, porometría de desplazamiento aire-líquido y porosimetría de mercurio. Cada técnica da información sobre aspectos diferentes: superficie, poros totales y poros activos. Si bien la distribución total de tamaños de poro es bastante ancha, los poros activos (abiertos al flujo presentan una distribución de tamaños estrecha con un valor medio muy próximo al nominal.

  15. Internal antecubital fold line: A new useful anatomical repair to identify the medial epicondyle and avoid iatrogenic ulnar nerve injury in patients with supracondylar fracture of the humerus Línea del pliegue antecubital interno: Un nuevo reparo anatómico útil para identificar la epitróclea y evitar lesiones iatrogénicas del nervio ulnar en pacientes con fractura supracondílea del humero

    Directory of Open Access Journals (Sweden)

    Luis José Cespedes

    2012-12-01

    ógrados cruzados, proporcionan la mejor estabilidad mecánica. La mayoría de los niños con fractura supracondílea presentan inflamación alrededor del codo, haciendo difícil la palpación de la epítroclea, aumentando el riesgo de lesión del nervio cubital. Objetivo: evaluar la correspondencia de la línea del pliegue antecubital interno con la epitróclea en pacientes con fractura supracondílea y la incidencia de las lesiones iatrogénicas del nervio cubital. Metodología: Realizamos una serie de casos clínicos. El primer grupo incluyó 56 niños con fractura supracondílea tipo III de Gartland, entre agosto de 2000 a septiembre de 2007, tratados con reducción cerrada y fijación con clavos cruzados retrógrados. El segundo grupo incluyó 241 (481 codos pacientes de consulta externa. En ambos grupos utilizamos la línea antecubital interna para identificar la epitróclea. Resultados: La prolongación de la línea del pliegue antecubital intersecó la epitróclea en todos los participantes del primer grupo. No hubo lesión iatrogénica del nervio cubital. En el segundo grupo la línea del pliegue antecubital intersecó la epitróclea en el 96.3% de los pacientes. Ningún paciente presentó lesión del nervio cubital. Conclusiones: La extensión de la línea de pliegue antecubital interno puede ser útil para la identificación de la epitróclea y así evitar lesiones iatrogénicas del nervio cubital. Salud UIS 2012; 44 (2: 9-14

  16. Algoritmo genético para reducir el makespan en un flow shop híbrido flexible con máquinas paralelas no relacionadas y tiempos de alistamiento dependientes de la secuencia

    Directory of Open Access Journals (Sweden)

    Juan Camilo López-Vargas

    2015-01-01

    Full Text Available El artículo propone el algoritmo genético simple o estándar (AGS como enfoque de solución al problema de programación de produc - ción para un ambiente tipo flow shop híbrido flexible minimizando el makespan. La codificación del algoritmo propuesto permite obtener resultados con tiempos de cómputo bastante razonables y con un nivel de convergencia del makespan cercano al 2%, con mejores solu - ciones que un algoritmo alternativo diseñado para el mismo caso de programación de producción. A partir de los resultados obtenidos en el proceso de experimentación y del posterior análisis comparativo, se concluye que a partir del modelamiento más completo de las condiciones reales de producción, el algoritmo genético ejecuta la programación de producción reduciendo el tiempo máximo de procesamiento, o makespan. En futuros trabajos, el enfoque de investigación será la búsqueda de más escenarios alternativos de producción, con el fin de incrementar la aplicación de este tipo de herramientas y generar impacto en los entornos empresariales reales.

  17. Fracturas de tibia, tratamiento con CIMB no fresados

    Directory of Open Access Journals (Sweden)

    Roberto Del Gordo D´Amato

    2013-10-01

    Full Text Available Se realizó un estudio descriptivo tipo serie de casos en el cual se analizan diversos aspectos inherentes al tratamiento quirúrgico de 92 fracturas de tibia diafisiarias cerradas y abiertas tipo I y II de Gustillo, tratadas con Clavos Intramedulares Bloqueados No Fresados (CIMBNF de las 125 atendidas servicio de ortopedia y traumatología de la Clínica El Prado de la Ciudad de Santa Marta D.T.C.H., entre diciembre del 2005 y diciembre del 2007. Se excluyeron de este estudio 33 casos en los cuales por diversas causas se realizó otro tipo de tratamiento fuera ortopédico o quirúrgico mediante colocación de fijadores externos. Utilizamos la clasificación del AO en la cual a este tipo de lesiones corresponde el número 42. Encontramos una alta incidencia en accidentes de transito como factor productor de este tipo de lesión y dentro de ellos la motocicleta como vehículo mas frecuente. Fueron evaluados 86 de los 92 pacientes que corresponde al 93.5% y dentro de ellos se presentaron complicaciones mayores en el 4.6%, cabe mencionar Infecciones post operatorias y deformidades a nivel proximal y distal por diversas causas, las cuales fueron corregidas con procedimientos ulteriores. (Duazary 2008; 1: 4 - 8

  18. Estudio retrospectivo de las fractures pertrocantéreas de fémur. Análisis del posicionamiento del tornillo cefálico en el tratamiento con clavo endomedular

    OpenAIRE

    Aguilar Garcia, Marc

    2011-01-01

    La fixació interna de les fractures pertrocantériques es una de les intervencions quirúrgiques més freqüents en Traumatologia. És precisament en les fractures més conminutes i inestables en les que el sistema de fixació i la seva correcta col·locació té major importància per evitar, en la major mesura possible, els desplaçaments secundaris de la fractura. El propòsit d'aquest treball és realitzar una revisió clínica quirúrgica d'aquestes fractures per demostrar el valor predictiu que tenen so...

  19. Measuring and Comparing Energy Flexibilities

    DEFF Research Database (Denmark)

    Valsomatzis, Emmanouil; Hose, Katja; Pedersen, Torben Bach

    2015-01-01

    induced by time and amount individually, and by their com- bination. To this end, we introduce several flexibility measures that take into account the combined effect of time and energy on flex-offer flexibility and discuss their respective pros and cons through a number of realistic examples....

  20. Flexible Bronchoscopy.

    Science.gov (United States)

    Miller, Russell J; Casal, Roberto F; Lazarus, Donald R; Ost, David E; Eapen, George A

    2018-03-01

    Flexible bronchoscopy has changed the course of pulmonary medicine. As technology advances, the role of the flexible bronchoscope for both diagnostic and therapeutic indications is continually expanding. This article reviews the historical development of the flexible bronchoscopy, fundamental uses of the flexible bronchoscope as a tool to examine the central airways and obtain diagnostic tissue, and the indications, complications, and contraindications to flexible bronchoscopy. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Diseño del software de control de un UUV para monitorización oceanográfica usando un modelo de componentes y framework con despliegue flexible

    Directory of Open Access Journals (Sweden)

    Francisco Ortiz

    2015-07-01

    Full Text Available Resumen: Los vehículos submarinos no tripulados (Unmanned Underwater Vehicles, UUVs se diseñan para misiones de monitorización, inspección e intervención. En estudios oceanográficos y de monitorización ambiental son cada vez más demandados por las innumerables ventajas que presentan con respecto a las tecnologías tradicionales. Estos vehículos son desarrollados para superar los retos científicos y los problemas de ingeniería que aparecen en el entorno no estructurado y hostil del fondo marino en el que operan. Su desarrollo no solo conlleva las mismas dificultades que el resto de los robots de servicio (heterogeneidad en el hardware, incertidumbre de los sistemas de medida, complejidad del software, etc., sino que además se les unen las propias del dominio de aplicación, la robótica submarina: condiciones de iluminación, incertidumbre en cuanto a posición y velocidad, restricciones energéticas, etc. Este artículo describe el UUV AEGIR, un vehículo utilizado como banco de pruebas para la implementación de estrategias de control y misiones oceanográficas. También describe el desarrollo de una cadena de herramientas que sigue un enfoque dirigido por modelos, utilizada en el diseño del software de control del vehículo, así como un framework basado en componentes que proporciona el soporte de ejecución de la aplicación y permite su despliegue flexible en nodos, procesos e hilos y pre-verificación del comportamiento concurrente. Su diseño ha permitido desarrollar, comprobar y añadir los componentes que proporcionan el comportamiento necesario para que el UUV AEGIR pudiera completar con éxito distintos tipos de misiones oceanográficas. Abstract: Unmanned Underwater Vehicles (UUVs explore different habitats with a view to protecting and managing them. They are developed to overcome scientific challenges and the engineering problems caused by the unstructured and hazardous underwater environment in which they operate

  2. On flexibility

    OpenAIRE

    Weiss, Christoph R.; Briglauer, Wolfgang

    2000-01-01

    By building on theoretical work by Mills and Schumann (1985) and Ungern-Sternberg (1990) this paper provides evidence on the determinants of two dimensions of flexibility, the flexibility in adjusting aggregate output over time (tactical flexibility) as well as the ability to switch quickly between products (operational flexibility). Econometric analysis of a sample of 40.000 farms in Upper-Austria for the period 1980 to 1990 suggests that larger full-time farms operated by younger, better ed...

  3. Uso combinado de radiación UV-C y biorecubrimiento de quitosán con aceites esenciales para el control de hongos en papaya Maradol

    Directory of Open Access Journals (Sweden)

    Alfredo Vázquez-Ovando

    2018-05-01

    Full Text Available Resumen La antracnosis y pudrición blanda en frutos de papaya provocan deterioro de la calidad, así como grandes pérdidas durante el manejo postcosecha. El uso de estrategias individuales para el control de enfermedades resulta poco eficiente. Por lo anterior, en el presente estudio se evaluó el efecto sinérgico de varias estrategias de control sobre la incidencia de enfermedad causada por la inoculación de esporas de los hongos Colletotrichum gloeosporioides (Penz. y Rhizopus stolonifer (Ehrenb. en papaya var. Maradol. Se evaluaron tratamientos resultantes de la combinación del uso de biorecubrimientos compuestos elaborados con quitosán (15 g L-1 adicionadas con aceites esenciales (AE de clavo, tomillo y/o lima (5 ó 10 mL L-1 de cada AE y tres dosis de irradiación UV-C (0.97 kJ·m-2, 2 kJ·m-2 y 2.88 kJ·m-2, aplicados a las 12, 24 y 48 h post-inoculación de esporas de los fitopatógenos. El tratamiento donde se combinó el biorecubrimiento adicionado con 10 mL L-1 de AE de clavo y 10 mL L-1 de AE de tomillo y una dosis de irradiación UV-C de 2.88 kJ m-2 (B1T92 aplicado a las 24 h post-inoculación de esporas, logró mantener la incidencia de enfermedad (para ambos hongos evaluados a valores menores de 25% durante nueve días de almacenamiento a temperatura de 28 ± 3 °C y 80% de HR. Este mismo tratamiento redujo la velocidad específica de la enfermedad, con valores de 0.549 y 0.029 d-1 para C. gloeosporioidesy R. stolonifer, respectivamente. Otros tratamientos (B2T62, B1T34, B1T34, B1T94 presentaron actividad antifúngica (valores promedio de incidencia de 35% durante todo el almacenamiento para R. stolonifer. Los resultados de este trabajo demuestran que el efecto sinérgico del uso de biorecubrimientos de quitosán con aceites esenciales y energía UV-C controla el desarrollo de hongos causantes de antracnosis y pudrición blanda en frutos de papaya Maradol.

  4. Comportamento da flexibilidade após 10 semanas de treinamento com pesos Comportamiento de la flexibilidad después de 10 semanas de entrenamiento con pesos Flexibility behavior after 10 weeks of resistance training

    Directory of Open Access Journals (Sweden)

    Edilson Serpeloni Cyrino

    2004-08-01

    Full Text Available O propósito deste estudo foi analisar o comportamento da flexibilidade de diferentes articulações após 10 semanas de treinamento com pesos (TP. Para tanto, 16 homens (23,0 ± 2,1 anos; 68,0 ± 7,0kg; 178,8 ± 8,7cm sedentários, mas aparentemente saudáveis, foram aleatoriamente divididos em grupo treinamento (GT, n = 8 e grupo controle (GC, n = 8. O GT foi submetido a 10 semanas consecutivas de TP (três sessões semanais, em dias alternados, ao passo que o GC não se envolveu com a prática de nenhum programa sistematizado de atividades físicas nesse período. Os 11 exercícios que compuseram o programa de TP foram executados em três séries de 8-12 RM. Os movimentos de flexão e extensão do ombro; flexão, extensão e flexão lateral do tronco; flexão e extensão do quadril; flexão e extensão do cotovelo; e flexão do joelho foram utilizados para a análise do comportamento da flexibilidade. ANOVA e ANCOVA para medidas repetidas, seguidas pelo teste post hoc de Tukey, quando P El propósito de este estudio fué analizar el comportamiento de la flexibilidad de diferentes articulaciones después de 10 semanas de entrenamiento con pesos (TP. Para ello, 16 hombres (23,0 ± 2,1 años; 68,0 ± 7,0 Kg.; 178,8 ± 8,7 cm sedentarios, aparentemente saludables, fueron aleatoriamente divididos en grupos de entrenamiento (GT, n = 8 y en grupo control (GC, n = 8. El GT fué sometido a 10 semanas consecutivas de TP (tres sesiones semanales, en días alternados, al tiempo que el GC no se incluyó en la práctica de ningún programa sistematizado de actividades físicas en ese período. Los 11 ejercicios que compusieron el programa de TP fueron ejecutados en tres series de 8-12 RM. Los movimientos de flexión y extensión del hombro; flexión, extensión y flexión lateral del tronco; flexión y extensión de los glúteos; flexión e extensión del codo; y flexión de la rodilla fueron utilizados para el análisis del comportamiento de la

  5. Conflicting flexibility

    NARCIS (Netherlands)

    De Jong, P.; Schaap, A.

    2011-01-01

    New buildings are designed for first users. For a sustainable approach there are many advantages in designing in flexibility and adjustability in order to enable and facilitate the other sequential users. For the first investor this flexibility is translated into improved exit values due to

  6. Workplace flexibility.

    Science.gov (United States)

    Scordato, C; Harris, J

    1990-01-01

    Whether your organization is in a growth pattern or downsizing, you are probably facing change. To gain some insight into your options, here is an in-depth look at the problems and benefits of some flexible work arrangements from a just published study by Catalyst.

  7. Flexibility conflict?

    NARCIS (Netherlands)

    Delsen, L.W.M.; Bauer, F.; Groß, H.; Sieglen, G.

    2002-01-01

    The chapter deals with the presupposed conflict of interests between employers and employees resulting from a decoupling of operating hours and working times. It starts from the notion that both long operating hours and flexibility are relative concepts. As there is some discretion, the ultimate

  8. Flexible licensing

    Directory of Open Access Journals (Sweden)

    Martyn Jansen

    2012-07-01

    Full Text Available The case is presented for a more flexible approach to licensing online library resources. Today's distributed education environment creates pressure for UK higher and further education institutions (HEI/FEIs to form partnerships and to develop educational products and roll them out across the globe. Online library resources are a key component of distributed education and yet existing licensing agreements struggle to keep pace with the increasing range of users and purposes for which they are required. This article describes the process of developing a flexible approach to licensing and proposes a new model licence for online library resources which has the adaptability needed in this new global educational landscape. These ideas have been presented and discussed at various workshops across Eduserv's and JISC Collections' higher education and publisher communities, and further consultation is ongoing.

  9. Flexible Consumption

    DEFF Research Database (Denmark)

    Holm Jacobsen, Peter; Pallesen, Trine

    This report presents the first findings from our qualitative study of consumer behaviour vis-à-vis flexible consumption. The main of objective of this report is to present our first round of data from Bornholm, and to assist the design of products/services designed in WP6. In the report, we adopt...... the perspective of the consumer: what does living in a demand response setup look like to participants – and what kinds of behaviour and interest motivate – and emerge from – their participation in EcoGrid 2.0....

  10. Flexible Capitalism

    DEFF Research Database (Denmark)

    Approaching “work” as at heart a practice of exchange, this volume explores sociality in work environments marked by the kind of structural changes that have come to define contemporary “flexible” capitalism. It introduces anthropological exchange theory to a wider readership, and shows how...... the perspective offers new ways to enquire about the flexible capitalism’s social dimensions. The essays contribute to a trans-disciplinary scholarship on contemporary economic practice and change by documenting how, across diverse settings, “gift-like” socialities proliferate, and even sustain the intensified...

  11. Flexible nanovectors

    International Nuclear Information System (INIS)

    Pugno, Nicola M

    2008-01-01

    In this paper we show that the control of adhesion in highly flexible (a property that could be crucial for smart drug delivery but which is still ignored in the literature) nanovectors can help in smartly targeting and delivering the drug. The existence of and the conditions for activating and controlling a super-adhesive state are addressed. Even if such a state has never been observed in nanovectors, our calculations, as well as observations in spiders and geckos, suggest its existence and feasible control. Control of the competition between the drag and the adhesive force is exploited to improve the targeting ability and a hierarchical model is applied to describe a real vasculature. The high flexibility of the nanovector is used to smartly deliver the drug only during adhesion by nanopumping or, as a limiting case, by the new concept of 'adhesion induced nanovector implosion'; a liquid drop analogy is utilized for the calculations. Fast (pumping) and slow (diffusion) drug deliveries can thus be separately controlled by controlling the size and shape of the nanovector. Multiple stage nanovectors are also briefly discussed, mimicking aerospace vector strategies.

  12. Flexible nanovectors

    Science.gov (United States)

    Pugno, Nicola M.

    2008-11-01

    In this paper we show that the control of adhesion in highly flexible (a property that could be crucial for smart drug delivery but which is still ignored in the literature) nanovectors can help in smartly targeting and delivering the drug. The existence of and the conditions for activating and controlling a super-adhesive state are addressed. Even if such a state has never been observed in nanovectors, our calculations, as well as observations in spiders and geckos, suggest its existence and feasible control. Control of the competition between the drag and the adhesive force is exploited to improve the targeting ability and a hierarchical model is applied to describe a real vasculature. The high flexibility of the nanovector is used to smartly deliver the drug only during adhesion by nanopumping or, as a limiting case, by the new concept of 'adhesion induced nanovector implosion'; a liquid drop analogy is utilized for the calculations. Fast (pumping) and slow (diffusion) drug deliveries can thus be separately controlled by controlling the size and shape of the nanovector. Multiple stage nanovectors are also briefly discussed, mimicking aerospace vector strategies.

  13. Cinética de separación de Cu (II por técnicas de flotación iónica, en celdas con dispersores flexibles

    Directory of Open Access Journals (Sweden)

    Reyes, M.

    2010-04-01

    Full Text Available This research studies and experimentally determines the kinetic parameters and effect of modifying the hydrodynamics and chemical conditions of the air-liquid dispersions during the Cu (II extraction by ion flotation techniques in cells with porous spargers. Results show that the elimination of Cu (II from solution can be carried out by ion flotation in one stage, obtaining efficiencies of 68% and 56% for the flat and cylindrical sparger respectively with a xanthate concentration of 0,02 g/l. In multistage systems five cells, recoveries over 92 % were achieved for both sparger geometries. The behavior of the flotation apparent kinetic constant is linear to the parameters that characterize dispersion (Jg, eg y Db, until a point is achieved where the process instability makes the system inoperable. The results show that removing base metal ions by ion flotation is strongly affected by the following factors: collector concentration [C], Jg, eg, Db, Jl and Sb.

    Este estudio investiga y determina experimentalmente los parámetros cinéticos y el efecto de la modificación de las condiciones químicas e hidrodinámicas de las dispersiones aire-líquido, durante la separación de Cu (II mediante técnicas de flotación iónica en celdas con dispersores porosos. Los resultados muestran que la eliminación de Cu (II de la solución se puede llevar acabo por flotación iónica en una etapa, con 68 y 56 % de recuperación y una concentración de xantato de 0,02 g/l, para los difusores de burbujas cilíndrico y plano, respectivamente. En sistemas multi etapas cinco celdas, se lograron recuperaciones superiores al 92 % para ambas geometrías de dispersión. La constante cinética de flotación aparente mantiene un comportamiento lineal con los parámetros que caracterizan una dispersión (Jg, eg y Db, hasta un punto donde la inestabilidad del proceso vuelve inoperable el sistema. Los resultados muestran que la remoción de iones

  14. [Flexible ENT endoscopy--video technic].

    Science.gov (United States)

    Rasinger, G A; Horak, F

    1985-02-01

    This study discusses the solutions to the problem of documenting moving processes in the field of otolaryngology. A flexible bronchoscope and video equipment connected to it are presented as a specific solution of the problem, with ample of observations. A technical comparison is used as the basis for a discussion of the pros and cons of the video and film techniques. A successful arrangement of examination facilities illustrates the future of flexible-endoscope techniques in the field of otolaryngology.

  15. Flexible Electronics Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Flexible Electronics Research Facility designs, synthesizes, tests, and fabricates materials and devices compatible with flexible substrates for Army information...

  16. RoboCon: A general purpose telerobotic control center

    International Nuclear Information System (INIS)

    Draper, J.V.; Noakes, M.W.; Blair, L.M.

    1997-01-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices

  17. RoboCon: A general purpose telerobotic control center

    Energy Technology Data Exchange (ETDEWEB)

    Draper, J.V.; Noakes, M.W. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Schempf, H. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Blair, L.M. [Human Machine Interfaces, Inc., Knoxville, TN (United States)

    1997-02-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices.

  18. Balance and flexibility.

    Science.gov (United States)

    2003-12-01

    The 'work-life balance' and flexible working are currently key buzz terms in the NHS. Those looking for more information on these topics should visit Flexibility at www.flexibility.co.uk for a host of resources designed to support new ways of working, including information on flexible workers and flexible rostering, the legal balancing act for work-life balance and home working.

  19. Flexible magnetoimpedance sensor

    KAUST Repository

    Li, Bodong; Kavaldzhiev, Mincho; Kosel, Jü rgen

    2015-01-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors's magnetic field and frequency

  20. Flexible Carpooling: Exploratory Study

    OpenAIRE

    Dorinson, Diana; Gay, Deanna; Minett, Paul; Shaheen, Susan

    2009-01-01

    Energy consumption could be reduced if more people shared rides rather than driving alone yet carpooling represents a small proportion of all potential carpoolers. Prior research has found that many who might carpool were concerned about reduced flexibility with carpooling. If flexibility is one of the barriers how could carpooling be organized to be more flexible? In Northern Virginia a flexible system has evolved where there are 3,500 single-use carpools per day. In another example there ...

  1. Experiencias en el desarrollo de una aplicación robótica con control de fuerza para taladrado de huesos

    Directory of Open Access Journals (Sweden)

    J.C. Fraile

    2008-04-01

    Full Text Available Resumen: En los sistemas de cirugía ortopédica asistida por ordenador (CAOS, el taladrado del hueso en la reparación de fracturas de huesos largos (para estabilizarlos con placas, clavos o tornillos es una tarea compleja que el cirujano debe realizar con gran precisión, evitando el calentamiento excesivo del tejido óseo. En la cirugía asistida por robots, se han utilizado principalmente robots industriales (Robodoc, Caspar, Crigos adaptados a ambientes quirúrgicos para ayudar al cirujano en esta tarea. En esta tarea de taladrado de huesos es necesario tener en cuenta varios factores: temperatura del hueso, velocidades de giro y avance de la herramienta de taladrado y fuerzas y pares que actúan sobre el hueso durante su taladrado.Es fundamental el desarrollo de algoritmos de control del robot manipulador para garantizar que las distintas variables que intervienen en el proceso de taladrado tomen los valores adecuados, bajo el control del cirujano, y así lograr una mayor calidad y precisión en la tarea quirúrgica de taladrado del hueso.Desafortunadamente, la mayoría de los robots industriales tienen una arquitectura de control propietaria que impide una fácil implantación de algoritmos de control externos basados en realimentación multisensorial (visión, fuerza.En este artículo se presenta el diseño de una arquitectura de control distribuido y abierto, que se ha implantado sobre el controlador de un robot Staubli. En ella se ha desarrollado una estrategia de control basada en realimentación de fuerza, que permite al cirujano realizar la tarea quirúrgica de taladrado del hueso con elevada precisión. Durante el taladrado con el robot, las fuerzas y pares que actúan sobre el hueso son medidos y utilizados para controlar la velocidad de avance de la herramienta de taladrado, y para controlar la fuerza aplicada al hueso. Se han obtenido resultados experimentales en condiciones de laboratorio con el manipulador equipado con un

  2. Paciente con esquizofrenia tratado con ziprasidona + clozapina

    Directory of Open Access Journals (Sweden)

    Pol Yanguas E.

    2013-05-01

    Full Text Available P es un paciente diagnosticado de esquizofrenia, sigue en un piso tutelado un programa de rehabilitación, está medicado con clozapina 500 mg/día y ziprasidona 280 mg/ día. Padece hipercolesterolemia, tabaquismo y sus hábitos alimenticios no son buenos. La medicación que utiliza desde 2007 hasta ahora se refleja en la tabla 1. El último tratamiento se le introdujo el 7 de agosto de 2012, habiendo presentado un electro cardiograma (ECG normal, pero con ligera taquicardia ventricular y prolactinemia de 44,8 ng/ml (valores normales: 2-18 ng/ml.

  3. Office flexible cystoscopy.

    Science.gov (United States)

    Kavoussi, L R; Clayman, R V

    1988-11-01

    Since the development of the first purpose-built flexible cystoscope in 1984, flexible cystoscopy has become an accepted diagnostic and therapeutic modality. Indeed, it is estimated that more than 10 per cent of practicing urologists are already familiar with this technology. The flexible cystoscope has markedly extended the urologist's ability to examine the bladder, and it has become a valuable adjunct to the rigid cystoscope. Although the operation of this instrument is vastly different from that of its rigid counterpart, with practice, the technique can be learned. After experience is obtained with diagnostic flexible cystoscopy, the urologist will likely prefer this new instrument for bladder inspection, as it provides for a more thorough yet less morbid and less expensive examination. In the future, the development of improved and smaller instrumentation will further extend the therapeutic indications for flexible cystoscopy. Indeed, advances in laser technology are already providing the urologist with 300- to 600-micron (0.9 to 1.8F) flexible probes capable of incision (KTP laser), fulguration (Nd:YAG laser), and stone disintegration (tunable dye laser). Lastly, the skills obtained in using the flexible cystoscope are all readily applicable to the development of dexterity with the already available flexible nephroscope and the more recently developed flexible ureteroscope.

  4. Organizational flexibility estimation

    OpenAIRE

    Komarynets, Sofia

    2013-01-01

    By the help of parametric estimation the evaluation scale of organizational flexibility and its parameters was formed. Definite degrees of organizational flexibility and its parameters for the Lviv region enterprises were determined. Grouping of the enterprises under the existing scale was carried out. Special recommendations to correct the enterprises behaviour were given.

  5. Reversibly Bistable Flexible Electronics

    KAUST Repository

    Alfaraj, Nasir

    2015-05-01

    Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent. While maintaining large-scale production and prototyping rapidity, this flexible and translucent scheme demonstrates the potential to transform conventionally stiff electronic devices into thin and foldable ones without compromising long-term performance and reliability. In this work, we report on the fabrication and characterization of reversibly bistable flexible electronic switches that utilize flexible n-channel metal-oxide-semiconductor field-effect transistors. The transistors are fabricated initially on rigid (100) silicon substrates before they are peeled off. They can be used to control flexible batches of light-emitting diodes, demonstrating both the relative ease of scaling at minimum cost and maximum reliability and the feasibility of integration. The peeled-off silicon fabric is about 25 µm thick. The fabricated devices are transferred to a reversibly bistable flexible platform through which, for example, a flexible smartphone can be wrapped around a user’s wrist and can also be set back to its original mechanical position. Buckling and cyclic bending of such host platforms brings a completely new dimension to the development of flexible electronics, especially rollable displays.

  6. Flexible magnetoimpidence sensor

    KAUST Repository

    Kavaldzhiev, Mincho

    2015-05-01

    Recently, flexible electronic devices have attracted increasing interest, due to the opportunities they promise for new applications such as wearable devices, where the components are required to flex during normal use[1]. In this light, different magnetic sensors, like microcoil, spin valve, giant magnetoresistance (GMR), magnetoimpedance (MI), have been studied previously on flexible substrates.

  7. Flexibility within Fidelity

    Science.gov (United States)

    Kendall, Philip C.; Gosch, Elizabeth; Furr, Jami M.; Sood, Erica

    2008-01-01

    The authors address concerns regarding manual-based treatments, highlighting the role of flexibility and creativity. A cognitive-behavioral therapy for youth anxiety called the Coping Cat program demonstrates the flexible application of manuals and emphasizes the importance of a child-centered, personalized approach that involves the child in the…

  8. Flexible position probe assembly

    International Nuclear Information System (INIS)

    Schmitz, J.J.

    1977-01-01

    The combination of a plurality of tubular transducer sections and a flexible supporting member extending through the tubular transducer sections forms a flexible elongated probe of a design suitable for monitoring the level of an element, such as a nuclear magnetically permeable control rod or liquid. 3 claims, 23 figures

  9. Flexible Carbon Aerogels

    Directory of Open Access Journals (Sweden)

    Marina Schwan

    2016-09-01

    Full Text Available Carbon aerogels are highly porous materials with a large inner surface area. Due to their high electrical conductivity they are excellent electrode materials in supercapacitors. Their brittleness, however, imposes certain limitations in terms of applicability. In that context, novel carbon aerogels with varying degree of flexibility have been developed. These highly porous, light aerogels are characterized by a high surface area and possess pore structures in the micrometer range, allowing for a reversible deformation of the aerogel network. A high ratio of pore size to particle size was found to be crucial for high flexibility. For dynamic microstructural analysis, compression tests were performed in-situ within a scanning electron microscope allowing us to directly visualize the microstructural flexibility of an aerogel. The flexible carbon aerogels were found to withstand between 15% and 30% of uniaxial compression in a reversible fashion. These findings might stimulate further research and new application fields directed towards flexible supercapacitors and batteries.

  10. Global Sourcing Flexibility

    DEFF Research Database (Denmark)

    Ørberg Jensen, Peter D.; Petersen, Bent

    2013-01-01

    the higher costs (but decreased risk for value chain disruption) embedded in a more flexible global sourcing model that allows the firm to replicate and/or relocate activities across multiple locations. We develop a model and propositions on facilitating and constraining conditions of global sourcing...... sourcing flexibility. Here we draw on prior research in the fields of organizational flexibility, international business and global sourcing as well as case examples and secondary studies. In the second part of the paper, we discuss the implications of global sourcing flexibility for firm strategy...... and operations against the backdrop of the theory-based definition of the construct. We discuss in particular the importance of global sourcing flexibility for operational performance stability, and the trade-off between specialization benefits, emerging from location and service provider specialization, versus...

  11. Videojuego con Realidad Virtual

    OpenAIRE

    González Mora, César

    2017-01-01

    El objetivo del proyecto es el desarrollo de un videojuego deportivo que utilice realidad mixta. El videojuego se podrá utilizar con dispositivos de tipo cardboard, y utilizará realidad aumentada para la interacción del jugador con el videojuego. En el desarrollo se utilizará el motor Unity para conseguir una aplicación multiplataforma, y la librería Vuforia para implementar realidad mixta.

  12. Sistemas integrados con Arduino

    OpenAIRE

    EL YAKOUTI, MOHAMMED

    2017-01-01

    Design of a robot prototype remotely controllable from Bluetooth using Arduino. Control and testing of sensors and events interacting with Arduino and Bluetooth. Diseño de un prototipo de robot controlable remotamente con Bluetooth utilizando Arduino. Control y verificación de los sensores y eventos que interactúan mediante el Arduino y el Bluetooth. El Yakouti, M. (2017). Sistemas integrados con Arduino. http://hdl.handle.net/10251/89274. TFGM

  13. Flexible Word Classes

    DEFF Research Database (Denmark)

    • First major publication on the phenomenon • Offers cross-linguistic, descriptive, and diverse theoretical approaches • Includes analysis of data from different language families and from lesser studied languages This book is the first major cross-linguistic study of 'flexible words', i.e. words...... that cannot be classified in terms of the traditional lexical categories Verb, Noun, Adjective or Adverb. Flexible words can - without special morphosyntactic marking - serve in functions for which other languages must employ members of two or more of the four traditional, 'specialised' word classes. Thus......, flexible words are underspecified for communicative functions like 'predicating' (verbal function), 'referring' (nominal function) or 'modifying' (a function typically associated with adjectives and e.g. manner adverbs). Even though linguists have been aware of flexible world classes for more than...

  14. Reversibly Bistable Flexible Electronics

    KAUST Repository

    Alfaraj, Nasir

    2015-01-01

    Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent

  15. Flexibility in insulin prescription

    Directory of Open Access Journals (Sweden)

    Sanjay Kalra

    2016-01-01

    Full Text Available This communication explores the concept of flexibility, a propos insulin preparations and insulin regimes used in the management of type 2 diabetes. The flexibility of an insulin regime or preparation is defined as their ability to be injected at variable times, with variable injection-meal time gaps, in a dose frequency and quantum determined by shared decision making, with a minimal requirement of glucose monitoring and health professional consultation, with no compromise on safety, efficiency and tolerability. The relative flexibility of various basal, prandial and dual action insulins, as well as intensive regimes, is compared. The biopsychosocial model of health is used to assess the utility of different insulins while encouraging a philosophy of flexible insulin usage.

  16. Investigando con personas con dificultades de aprendizaje

    Directory of Open Access Journals (Sweden)

    Borja González Luna

    2013-12-01

    Full Text Available El artículo muestra los orígenes de lo que Walmsley (2008 denomina «investigación inclusiva». Para comprender qué se entiende por investigación inclusiva tenemos que remontarnos a los debates epistemológicos sobre las metodologías cuantitativas y cualitativas, acontecidos en la década de los 90, en torno a la revista Disability & Society. A partir de una síntesis de dichos debates, focalizados en el ámbito de la «discapacidad intelectual y del desarrollo», se exponen dos estrategias de colaboración con dicha población: a una aproximación etnográfica (de trabajo grupal, y b una aproximación biográfica (de trabajo individual. A continuación se esboza un posible diseño de trabajo de campo que intenta superar el paradigma cualitativo «clásico» con el objetivo de incluir a dicho colectivo más allá del rol de «sujetos de la investigación». Para finalizar se recoge el debate sobre la accesibilidad de los resultados de la investigación a los participantes en dichas investigaciones, y con ello la necesaria innovación en el ámbito de las «devoluciones» de los resultados, cuando se trata de incluir a personas que presentan limitaciones para la comprensión del lenguaje abstracto oral y/o escrito.

  17. Flexible displays, rigid designs?

    DEFF Research Database (Denmark)

    Hornbæk, Kasper

    2015-01-01

    Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs.......Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs....

  18. Flexible transparent electrode

    Science.gov (United States)

    Demiryont, Hulya; Shannon, Kenneth C., III; Moorehead, David; Bratcher, Matthew

    2011-06-01

    This paper presents the properties of the EclipseTECTM transparent conductor. EclipseTECTM is a room temperature deposited nanostructured thin film coating system comprised of metal-oxide semiconductor elements. The system possesses metal-like conductivity and glass-like transparency in the visible region. These highly conductive TEC films exhibit high shielding efficiency (35dB at 1 to 100GHz). EclipseTECTM can be deposited on rigid or flexible substrates. For example, EclipseTECTM deposited on polyethylene terephthalate (PET) is extremely flexible that can be rolled around a 9mm diameter cylinder with little or no reduction in electrical conductivity and that can assume pre-extension states after an applied stress is relieved. The TEC is colorless and has been tailored to have high visible transmittance which matches the eye sensitivity curve and allows the viewing of true background colors through the coating. EclipseTECTM is flexible, durable and can be tailored at the interface for applications such as electron- or hole-injecting OLED electrodes as well as electrodes in flexible displays. Tunable work function and optical design flexibility also make EclipseTECTM well-suited as a candidate for grid electrode replacement in next-generation photovoltaic cells.

  19. Flexible magnetoimpedance sensor

    International Nuclear Information System (INIS)

    Li, Bodong; Kavaldzhiev, Mincho N.; Kosel, Jürgen

    2015-01-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors's magnetic field and frequency responses and their dependence on the sensors's deflection. For the first time, the impedance characteristic is obtained through reflection coefficient analysis over a wide range of frequencies from 0.1 MHz to 3 GHz and for deflections ranging from zero curvature to a radius of 7.2 cm. The sensor element maintains a high MI ratio of up to 90% and magnetic sensitivity of up to 9.2%/Oe over different bending curvatures. The relationship between the curvature and material composition is discussed based on the magnetostriction effect and stress simulations. The sensor's large frequency range, simple fabrication process and high sensitivity provide a great potential for flexible electronics and wireless applications. - Highlights: • A flexible magnetoimpedance (MI) sensor is developed. • Studies are carried out using a flexible microstrip transmission line. • An MI ratio of up to 90% is obtained. • The effect of magnetostriction is studied

  20. Education for Flexible Personality

    Directory of Open Access Journals (Sweden)

    Bogomir Novak

    1998-12-01

    Full Text Available Flexible personality transforms both cultural environment and itself. Post-modern personality is both contemplative and active. On one hand, it is subject to inner imagination of a creative act, and on the other hand, to creation of a tangible product What is more, flexible personality is also autonomous, mature, healthy and well balanced, as well as stable and responsive to the demand for change. Due to ever quicker changes, flexible personality is a must. And it is a task. The impact of professional work of adults on the education of children, however, is being conditioned by the exrigid family and rigid enterprises or institutions in which adults are employed. Nevertheless, flexible educational style is not repressive, as it used to be, nor permissive and totally concentrated on the child. It is a choice between the two qualities. The educators' style is dependent on their attitude towards life (play and self-education and not only towards work. Nowadays, flexibility is a way towards quality management of social and personal changes.

  1. Flexible Foam Model.

    Energy Technology Data Exchange (ETDEWEB)

    Neilsen, Michael K.; Lu, Wei-Yang; Werner, Brian T.; Scherzinger, William M.; Lo, Chi S.

    2018-03-01

    Experiments were performed to characterize the mechanical response of a 15 pcf flexible polyurethane foam to large deformation at different strain rates and temperatures. Results from these experiments indicated that at room temperature, flexible polyurethane foams exhibit significant nonlinear elastic deformation and nearly return to their original undeformed shape when unloaded. However, when these foams are cooled to temperatures below their glass transition temperature of approximately -35 o C, they behave like rigid polyurethane foams and exhibit significant permanent deformation when compressed. Thus, a new model which captures this dramatic change in behavior with temperature was developed and implemented into SIERRA with the name Flex_Foam to describe the mechanical response of both flexible and rigid foams to large deformation at a variety of temperatures and strain rates. This report includes a description of recent experiments. Next, development of the Flex Foam model for flexible polyurethane and other flexible foams is described. Selection of material parameters are discussed and finite element simulations with the new Flex Foam model are compared with experimental results to show behavior that can be captured with this new model.

  2. Giochiamo con i robot

    Directory of Open Access Journals (Sweden)

    Andrea Bonarini

    2009-01-01

    Full Text Available "Giochiamo con i robot" e' un laboratorio interattivo per grandi e piccini realizzato per l'edizione 2007 del Festival della Scienza di Genova. Lungo un percorso che va dalla telerobotica alla robotica evolutiva, il laboratorio sviluppa il tema di dare intelligenza ai robot. Questo percorso, le cui tappe sono le varie installazioni, si conclude nella "bottega" dove e' possibile costruire e programmare i propri robot o smontare e modificare quelli esposti durante il percorso didattico. I visitatori sono coinvolti in attivita' ludiche grazie alle quali possonoentrare in contatto con alcune delle idee potenti della robotica,

  3. disegnare con ... Alberto Pratelli

    Directory of Open Access Journals (Sweden)

    Roberto Mingucci

    2017-12-01

    Full Text Available Con questa breve intervista ad Alberto Pratelli, (non a caso scelto per aprire questa nuova rubrica intendia-mo inaugurare un dialogo con personalità significati-ve del Disegno di Architettura, che consenta riflessioni dedicate alle sue varie dimensioni, oggi più che mai da approfondire. La suggestione a farlo, viene da un’idea di Pablo Rodri-guez Navarro ed abbiamo quindi pensato di avviarla proprio in questo numero, che Pablo ha accettato di curare su un tema a lui particolarmente caro.

  4. Natural flexible dermal armor.

    Science.gov (United States)

    Yang, Wen; Chen, Irene H; Gludovatz, Bernd; Zimmermann, Elizabeth A; Ritchie, Robert O; Meyers, Marc A

    2013-01-04

    Fish, reptiles, and mammals can possess flexible dermal armor for protection. Here we seek to find the means by which Nature derives its protection by examining the scales from several fish (Atractosteus spatula, Arapaima gigas, Polypterus senegalus, Morone saxatilis, Cyprinius carpio), and osteoderms from armadillos, alligators, and leatherback turtles. Dermal armor has clearly been developed by convergent evolution in these different species. In general, it has a hierarchical structure with collagen fibers joining more rigid units (scales or osteoderms), thereby increasing flexibility without significantly sacrificing strength, in contrast to rigid monolithic mineral composites. These dermal structures are also multifunctional, with hydrodynamic drag (in fish), coloration for camouflage or intraspecies recognition, temperature and fluid regulation being other important functions. The understanding of such flexible dermal armor is important as it may provide a basis for new synthetic, yet bioinspired, armor materials. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Flexible magnetoimpedance sensor

    KAUST Repository

    Li, Bodong

    2015-03-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors\\'s magnetic field and frequency responses and their dependence on the sensors\\'s deflection. For the first time, the impedance characteristic is obtained through reflection coefficient analysis over a wide range of frequencies from 0.1 MHz to 3 GHz and for deflections ranging from zero curvature to a radius of 7.2 cm. The sensor element maintains a high MI ratio of up to 90% and magnetic sensitivity of up to 9.2%/Oe over different bending curvatures. The relationship between the curvature and material composition is discussed based on the magnetostriction effect and stress simulations. The sensor\\'s large frequency range, simple fabrication process and high sensitivity provide a great potential for flexible electronics and wireless applications.

  6. Software industrial flexible

    OpenAIRE

    Díaz Araya, Daniel; Muñoz, Leandro; Sirerol, Daniel; Oviedo, Sandra; Ibáñez, Francisco S.

    2012-01-01

    En este trabajo se pretende investigar y proponer técnicas, métodos y tecnologías que permitan el desarrollo de software flexible en ambientes industriales. El objetivo es generar métodos y técnicas para facilitar el desarrollo de software flexible en ambientes industriales. Las áreas de investigación son los sistemas de scheduling de producción, la generación de software para plataformas de hardware abiertas y la innovación.

  7. Production Flexibility and Hedging

    Directory of Open Access Journals (Sweden)

    Georges Dionne

    2015-12-01

    Full Text Available We extend the analysis on hedging with price and output uncertainty by endogenizing the output decision. Specifically, we consider the joint determination of output and hedging in the case of flexibility in production. We show that the risk-averse firm always maintains a short position in the futures market when the futures price is actuarially fair. Moreover, in the context of an example, we show that the presence of production flexibility reduces the incentive to hedge for all risk averse agents.

  8. The flexibility of flexicurity

    DEFF Research Database (Denmark)

    Jensen, Carsten Strøby

    2011-01-01

    by a special relation between flexibility, social security and active labour market policy, where a high level of social security is seen as a precondition for a labour market characterized by flexibility. In this article it is argued that the Danish labour market is characterized by having not just one model...... of flexicurity, but two. These two models cover different parts of the labour market and different segments of employees. The first model (the blue-collar flexicurity model) – the one that is often focused on in the literature – covers primarily skilled and unskilled workers on the labour market. The second...

  9. Conversando con Oriol Bohigas

    OpenAIRE

    Redondo Domínguez, Ernesto; Moya Sala, Joaquim

    2015-01-01

    [EN] Interview with Oriol Bohigas [ES] Entrevista con Oriol Bohigas Redondo Domínguez, E.; Moya Sala, J. (2015). Conversando con… Oriol Bohigas. EGA. Revista de Expresión Gráfica Arquitectónica. 20(26):22-35. doi:10.4995/ega.2015.4061 22 35 20 26

  10. DR Con o:

    African Journals Online (AJOL)

    which could fall under the Ugandan influence. The con-. flict in the ..... The Congolese people and international community within SADC, the AU ..... ments and make peace among themselves. However, one ... friends overnight.There is a great ...

  11. fertilizada con diferentes abonos

    Directory of Open Access Journals (Sweden)

    Jorge Alberto Elizondo-Salazar

    2007-01-01

    Full Text Available Producción y calidad de la biomasa de morera (Morus alba fertilizada con diferentes abonos. Se llevó a cabo un experimento en la Estación Experimental “Alfredo Volio Mata” de la Universidad de Costa Rica con el fi n de evaluar la aplicación de 150 kg de N/ha/año proveniente de dos abonos orgánicos: lombriabono y compostaje; y de un fertilizante químico, sobre la producción y calidad de la biomasa de morera. El periodo experimental comprendió un ciclo de 12 meses, iniciando en julio del 2003 y fi nalizando en julio del 2004. Se utilizó una plantación de morera de 12 años de establecida con una densidad de siembra de 27.777 plantas/ ha. Se empleó un diseño de bloques completos al azar con cuatro tratamientos: dos abonos orgánicos, nitrato de amonio (33,5% N y un control. Las plantas se podaron a 0,6 m sobre el nivel del suelo al inicio del ensayo. Durante el periodo experimental, las plantas fueron podadas consecutivamente cada 90 días. Las hojas y los tallos fueron separados y analizados para determinar el contenido de materia seca y proteína cruda. La producción de materia seca fue 23% superior y el contenido de proteína cruda fue signifi cativamente mayor con el nitrógeno químico, mientras que el contenido de materia seca fue menor. No se encontraron diferencias signifi cativas entre el tratamiento control y los tratamientos orgánicos.

  12. Manejo de conductos radiculares con curvatura marcada

    Directory of Open Access Journals (Sweden)

    Jorge Mario Nuñez Duran

    2013-10-01

    Full Text Available Las variaciones anatómicas en dientes con conductos que poseen dilaceraciones hacen del tratamiento de endodonciaun reto o una complicación relativa, en donde el clínico debe desarrollar toda su habilidad y el uso de instrumentosespeciales que faciliten u optimicen la terapia de conductos radiculares. La toma de radiografías previas con diferentesangulaciones y el estudio minucioso de ellas, darán una ayuda fundamental para conocer más detalladamente estacomplicación anatómica, que en algunos casos es muy frecuente. El uso de instrumental más flexible y resistentepermite llegar con mayor precisión y seguridad a la parte apical sin que se corra el riesgo de fracturar los instrumentos,limpiándolos y modelándolos en toda su extensión para poder obturarlos de una manera correcta.El uso de limas de menor calibre, precurvadas, permite acceder a la porción dilacerada de la raíz. Este es un métodoeficaz para prevenir la perdida de longitud de trabajo y evitar así las perforaciones de las raíces durante la preparación.Dentro de los errores más comunes durante la instrumentación de los conductos está la perdida de longitud detrabajo, junto con la transportación del foramen apical, ya sea de manera externa o interna. En el presente artículose menciona el uso de nuevas y mejores técnicas usadas para poder evitar este tipo de errores y se muestra un casoclínico del manejo de un molar superior con una curvatura de 40 grados que fue preparado y obturado exitosamentecon el sistema Protaper (Dentsply- maillefer.

  13. Flexibility as a service

    NARCIS (Netherlands)

    Aalst, van der W.M.P.; Adams, M.; Hofstede, ter A.H.M.; Pesic, M.; Schonenberg, H.; Chen, L.; Liu, C.; Liu, Q.; Deng, K.

    2009-01-01

    The lack of flexibility is often seen as an inhibitor for the successful application of workflow technology. Many researchers have proposed different ways of addressing this problem and some of these ideas have been implemented in commercial systems. However, a "one size fits all" approach is likely

  14. Valuing Flexibility. Phase 2

    Science.gov (United States)

    2012-10-29

    Quarterly (2): 38-49. Cormier, P., Olewnik, A., and Lewis, K. 2008. An Approach to Quantifying Design Flexibility for Mass Customization in Early...C. Clarkson, P., and Zanker, W. 2004. Change and customisation in complex engineering domains, Res Eng Des 15(1), 1–21. Ekstrom, M. and Bjornsson, H

  15. Flexible Query Answering Systems

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 12th International Conference on Flexible Query Answering Systems, FQAS 2017, held in London, UK, in June 2017. The 21 full papers presented in this book together with 4 short papers were carefully reviewed and selected from 43 submissions...

  16. Flexible metal bellows

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    A set of flexible metal bellows being fatigue-tested by repeated offset motion. Such bellows assemblies were used in the SPS vacuum system at places where , for instance, beam stoppers and collimators had to be moved frequently in and out of the beam path.

  17. Flexible energy systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    The paper discusses and analyses diffent national strategies and points out key changes in the energy system in order to achieve a system which can benefit from a high percentage of wind and CHP without having surplus production problems, introduced here as a flexible energy system....

  18. A flexible WLAN receiver

    NARCIS (Netherlands)

    Schiphorst, Roelof; Hoeksema, F.W.; Slump, Cornelis H.

    2003-01-01

    Flexible radio receivers are also called Software Defined Radios (SDRs) [1], [2]. The focus of our SDR project [3] is on designing the front end, from antenna to demodulation in bits, of a °exible, multi-standard WLAN receiver. We try to combine an instance of a (G)FSK receiver (Bluetooth) with an

  19. Energy Flexibility in Retail Buildings

    DEFF Research Database (Denmark)

    Ma, Zheng; Billanes, Joy Dalmacio; Kjærgaard, Mikkel Baun

    2017-01-01

    Retail buildings has an important role for demand side energy flexibility because of their high energy consumption, variety of energy flexibility resources, and centralized control via building control systems. Energy flexibility requires agreements and collaborations among different actors......), with the discussion of the stakeholders’ roles and their interrelation in delivering energy flexibility with the influential factors to the actual implementation of energy flexible operation of their buildings. Based on a literature analysis, the results cover stakeholders’ types and roles, perceptions (drivers......, barriers, and benefits), energy management activities and technology adoptions, and the stakeholders’ interaction for the energy flexibility in retail buildings....

  20. pacientes con falla cardiaca

    Directory of Open Access Journals (Sweden)

    Diana Marcela Achury Saldaña

    2007-01-01

    Full Text Available Objetivo: determinar la adherencia al tratamiento de pacientes con falla cardiaca hospitalizados, al aplicar un plan educativo quefomenta el autocuidado.Método: estudio cuasiexperimental (entrevistas enfermera-paciente realizado entre diciembre de 2004 y mayo de 2006, con unamuestra de 50 pacientes seleccionados por conveniencia. Se diseñó un instrumento para evaluar los comportamientos de los pacientes,con base en algunos resultados de la adherencia y sus respectivos indicadores de la taxonomía NOC (Nursing out comes classification. Laadherencia al tratamiento fue medida en dos momentos: el primero durante la hospitalización, seguido de la aplicación del plan educativoantes del alta, que proporcionaba información en el manejo de su enfermedad desde una dimensión física, psicológica y social quepromueve el autocuidado; y el segundo un mes después del alta en su domicilio.Resultados: diferencias estadísticamente significativas (P=0,0001 que demuestran cómo mediante la capacitación al paciente enel manejo de su tratamiento farmacológico y no farmacológico, el establecimiento de una sana relación entre el profesional de enfermeríay el paciente, y la participación de la familia, se logra una total adherencia al tratamiento.Conclusiones: para lograr una adherencia total del paciente con falla cardiaca al tratamiento es necesario un proceso educativo y unseguimiento continuo y personalizado que motive permanentemente al paciente y se le reconozca el papel protagónico en su cuidado y manejo de la enfermedad.

  1. Diffusion in flexible pipes

    Energy Technology Data Exchange (ETDEWEB)

    Brogaard Kristensen, S.

    2000-06-01

    This report describes the work done on modelling and simulation of the complex diffusion of gas through the wall of a flexible pipe. The diffusion and thus the pressure in annulus depends strongly on the diffusion and solubility parameters of the gas-polymer system and on the degree of blocking of the outer surface of the inner liner due to pressure reinforcements. The report evaluates the basis modelling required to describe the complex geometries and flow patterns. Qualitatively results of temperature and concentration profiles are shown in the report. For the program to serve any modelling purpose in 'real life' the results need to be validated and possibly the model needs corrections. Hopefully, a full-scale test of a flexible pipe will provide the required temperatures and pressures in annulus to validate the models. (EHS)

  2. Flexible cryogenic conduit

    International Nuclear Information System (INIS)

    Brindza, P.D.; Wines, R.R.; Takacs, J.J.

    1999-01-01

    A flexible and relatively low cost cryogenic conduit is described. The flexible cryogenic conduit of the present invention comprises a first inner corrugated tube with single braided serving, a second outer corrugated tube with single braided serving concentric with the inner corrugated tube, and arranged outwardly about the periphery of the inner corrugated tube and between the inner and outer corrugated tubes: a superinsulation layer; a one half lap layer of polyester ribbon; a one half lap layer of copper ribbon; a spirally wound refrigeration tube; a second one half lap layer of copper ribbon; a second one half lap layer of polyester ribbon; a second superinsulation layer; a third one half lap layer of polyester ribbon; and a spirally wound stretchable and compressible filament

  3. Diffusion in flexible pipes

    Energy Technology Data Exchange (ETDEWEB)

    Brogaard Kristensen, S

    2000-06-01

    This report describes the work done on modelling and simulation of the complex diffusion of gas through the wall of a flexible pipe. The diffusion and thus the pressure in annulus depends strongly on the diffusion and solubility parameters of the gas-polymer system and on the degree of blocking of the outer surface of the inner liner due to pressure reinforcements. The report evaluates the basis modelling required to describe the complex geometries and flow patterns. Qualitatively results of temperature and concentration profiles are shown in the report. For the program to serve any modelling purpose in 'real life' the results need to be validated and possibly the model needs corrections. Hopefully, a full-scale test of a flexible pipe will provide the required temperatures and pressures in annulus to validate the models. (EHS)

  4. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  5. Flexible training under threat.

    Science.gov (United States)

    Houghton, Anita; Eaton, Jennifer

    2002-10-01

    As the number of women in medicine and the general demand for a better work-life balance rises, flexible training is an increasingly important mechanism for maintaining the medical workforce. The new pay deal, together with entrenched cultural attitudes, are potential threats. Ways forward include more substantive part-time posts, more part-time opportunities at consultant level, and using positive experiences as a way of tackling attitudes in the less accepting specialties.

  6. Flexible weapons architecture design

    OpenAIRE

    Pyant, William C.

    2015-01-01

    Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilia...

  7. Industrial Fuel Flexibility Workshop

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  8. Flexible Land Administration

    DEFF Research Database (Denmark)

    Enemark, Stig

    2014-01-01

    Security of tenure is widely considered to be the missing piece of the puzzle when it comes to eradication of poverty. And, as explained in the previous issue of Geoinformatics, the European Union is now placing land rights at the heart of EU development policy. This article presents a way forwar...... in terms of building flexible and "fit-for-purpose" land administration systems in developing countries. This will ensure security of tenure for all and sustainable management of the use of land....

  9. Inventory information approval system certification and flexible spending account purchases.

    Science.gov (United States)

    Shuey, Brandon; Williams, La Vonn A

    2010-01-01

    There is no question that 2009 was a year of change within the pharmacy industry. Several new requirements were implemented, including the need for an Inventory Information Approval System for accepting flexible spending or health reimbursement account cords. Some pharmacies relied on the 90% exemption rule, which is discussed within this article, or an alternative method to avoid the expense of a point of sale. However, with flexible spending or health reimbursement account card participation expected to reach 85% in 2010, now bay be the time for compounding pharmacists to weigh the pros and cons of Inventory Information Approval System certification.

  10. PTFE films with improved flexibility

    Science.gov (United States)

    Muraca, R. F.; Koch, A. A.

    1972-01-01

    Development and application of flexible polytetrafluroethylene films for expulsion bladders in spacecraft propellant tanks are described. Flexibility of material is obtained by reducing crystallinity through annealing and quenching in water. Physical and mechanical properties of material are presented.

  11. Flexible automated manufacturing for SMEs

    DEFF Research Database (Denmark)

    Grube Hansen, David; Bilberg, Arne; Madsen, Erik Skov

    2017-01-01

    SMEs are in general highly flexible and agile in order to accommodate the customer demands in the paradigm of High Mix-Low Volume manufacturing. The flexibility and agility have mainly been enabled by manual labor, but as we are entering the technology and data driven fourth industrial revolution......, where augmented operators and machines work in cooperation in a highly flexible and productive manufacturing system both an opportunity and a need has raised for developing highly flexible and efficient automation....

  12. Cementos con cenizas volantes

    Directory of Open Access Journals (Sweden)

    Ossa M., Mauricio

    1984-03-01

    additions of 20 and 30% .

    Casi la generalidad de los estudios realizados sobre cementos con adición de cenizas volantes se refieren a sus características y comportamiento en pastas, morteros y hormigones, siempre en relación con aquéllos del cemento portland. Esta vez, se desarrolló un trabajo experimental orientado a relacionar entre sí los cementos con adiciones de cenizas volantes y de puzolana natural. Para ello se fabricaron a escala de laboratorio cementos de ambos tipos, empleando como materias primas comunes clinker y yeso y, como variables, diferentes porcentajes de las dos adiciones, que cumplieron previamente los requisitos normalizados en cuanto a sus actividades puzolánicas. La calidad de los cementos fabricados resultó adecuada y concordante con la del cemento portland-puzolánico obtenido a escala industrial con los mismos clinker, yeso y puzolana natural de este estudio. Posteriormente, se determinaron las características de los cementos experimentales y se confeccionaron morteros normales para la realización de ensayos físicos y mecánicos. Los resultados de ensayos indicaron que los cementos con adición de cenizas volantes (CCV requieren menos agua para consistencia normal, presentan tiempos de fraguado mayores y expansiones en autoclave menores que los cementos con adición de puzolana (CP. Los calores de hidratación a 7 y 28 días de edad fueron aproximadamente similares para ambos tipos de cemento. En morteros normales, los cementos CCV mostraron menor retracción de secado, mayor retentividad y mayor fluidez (para igual cantidad de agua que los cementos CP. En los ensayos de exudación se observó que ésta depende más de la finura que el tipo de adición. Finalmente, los ensayos mecánicos señalaron que las resistencias a compresión y flexotracción de los morteros con cementos CCV son menores a edades inferiores que 14 días (del orden de 5 a 10% a un día de edad, pero que a partir de entonces pasan a ser mayores que las de

  13. Designing structural supply chain flexibility

    NARCIS (Netherlands)

    Mulinski, Ksawery Jan

    2012-01-01

    In a continuously changing business environment the role of supply chain flexibility is constantly increasing. A flexible supply chain can ensure survival in quickly changing market conditions as well as enable sustainable growth. This thesis explores the topic of supply chain flexibility with focus

  14. Global Analysis of Flexible Risers

    DEFF Research Database (Denmark)

    Banke, Lars

    1996-01-01

    Flexible pipes are often a technically attractive alternative to the traditional steel pipe. Often commercial utilisation of oil/gas fields depends on the use of flexible pipes. An example is when floating production vessels are used, where the flexible pipe follows the wave induced motions...

  15. competencia con China

    Directory of Open Access Journals (Sweden)

    Elena de la Paz Hernández Águila

    2007-01-01

    Full Text Available El artículo ofrece un diagnóstico del desempeño de la industria mexicana del calzado desde la década de los ochenta hasta la actualidad. Analiza la problemática que ha enfrentado esta rama industrial a partir del proceso de apertura comercial y de la competencia en su mercado interno con productos provenientes de países asiáticos, particularmente China. Problematiza al respecto los retos y las perspectivas que a mediano plazo enfrentará este sector empresarial y sobre las posibilidades de competir en el mercado globalizado.

  16. Construir con Madera

    OpenAIRE

    Olabe-Velasco, F. (Fermín); Val-Hernández, Y. (Yolanda); Varela-de-la-Cruz, P. (Perla); Cabrero-Ballarín, J.M. (José Manuel)

    2010-01-01

    Guía divulgativa ‘Construir con madera’, elaborada por la Cátedra Madera de la Universidad de Navarra y el Gobierno de Navarra. La publicación pretende explicar de forma sencilla los beneficios y posibilidades de este material en la construcción, tanto en lo que respecta a su resistencia, comportamiento frente al fuego, durabilidad, capacidad de aislamiento, propiedades acústicas, estética, respeto al medio ambiente y sostenibilidad como fuente de energía. A modo de ejemplo, en la ...

  17. Entrevista con Giovanni Levi

    Directory of Open Access Journals (Sweden)

    Monica Oliveira

    2017-06-01

    Full Text Available En esta entrevista, Giovanni Levi - como un conocedor del tema de Familia - realiza una importante evaluación sobre el actual estado de las investigaciones realizadas en el Brasil y em el exterior. Con estilo franco, agudo y lucido critica las visiones tradicionales y sus ilusiones ypropone nuevos conceptos y métodos. La historia de la familia debería ceder espacio para el estudio de las redes relacionales o de los mundos relacionales. De la misma forma, la historia cuantitativa debería abrir espacio para el estudio de las cualidades. Ya con relación a la historia de las elites, tan estudiada y reproducida en una diversidad de trabajos, que deberíase mirar en otra perspectiva. Es decir, no mirar a las reglas sociales predeterminadas, sino a los desvíos y a las variaciones. Levi defiende que los historiadores deben trascender a los documentos que se encuentran fácilmente y que pueden fortalecer perspectivas deformadas y esequilibradas de la sociedad. Para él, los historiadores deben esforzarse por estudiar a aquellos grupos que dejaron pocos rastros documentales. En ese esfuerzo existiría una nueva mirada sobre la historia de la familia.

  18. Entrevista con Patricia Ariza

    Directory of Open Access Journals (Sweden)

    Esperanza Londoño La Rotta

    2017-01-01

    Full Text Available Pensamiento, Palabra y Obra entrevista a una artista, feminista y activista política, quien como mujer y artista ha permitido pensar el arte más allá de un simple espectáculo. Toda una vida dedicada al teatro y a darle voz, a través de sus obras, a víctimas del conflicto colombiano, defensora de derechos humanos; además de hacer evidente en su vida y a través de la plataforma “Artistas por la paz”, las múltiples relaciones que se pueden establecer entre el arte, la construcción de paz y la resolución de conflictos. Hablamos en su casa, en medio del calor de la bienvenida con Patricia Ariza, directora del festival alternativo de teatro, de Mujeres en Escena y de la Corporación Colombiana de Teatro, entre otras muchas actividades que voluntariamente su espíritu libertario ha asumido. Esta entrevista se realizó antes del 2 de octubre, pero con la revisión de los acuerdos que propició el plebiscito ganado por una ínfima minoría por el no, sigue siendo vigente este planteamiento.

  19. Flexible Query Answering Systems

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 10th International Conference on Flexible Query Answering Systems, FQAS 2013, held in Granada, Spain, in September 2013. The 59 full papers included in this volume were carefully reviewed and selected from numerous submissions. The papers...... are organized in a general session train and a parallel special session track. The general session train covers the following topics: querying-answering systems; semantic technology; patterns and classification; personalization and recommender systems; searching and ranking; and Web and human...

  20. Asymmetric Flexible Supercapacitor Stack

    Directory of Open Access Journals (Sweden)

    Leela Mohana Reddy A

    2008-01-01

    Full Text Available AbstractElectrical double layer supercapacitor is very significant in the field of electrical energy storage which can be the solution for the current revolution in the electronic devices like mobile phones, camera flashes which needs flexible and miniaturized energy storage device with all non-aqueous components. The multiwalled carbon nanotubes (MWNTs have been synthesized by catalytic chemical vapor deposition technique over hydrogen decrepitated Mischmetal (Mm based AB3alloy hydride. The polymer dispersed MWNTs have been obtained by insitu polymerization and the metal oxide/MWNTs were synthesized by sol-gel method. Morphological characterizations of polymer dispersed MWNTs have been carried out using scanning electron microscopy (SEM, transmission electron microscopy (TEM and HRTEM. An assymetric double supercapacitor stack has been fabricated using polymer/MWNTs and metal oxide/MWNTs coated over flexible carbon fabric as electrodes and nafion®membrane as a solid electrolyte. Electrochemical performance of the supercapacitor stack has been investigated using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy.

  1. Reactivación de la movilización obrera en la industria terminal automotriz (2004‐2011: Recuperación parcial del salario con persistencia en la flexibilización laboral Reactivation of labor mobilization in the automotive industry (2004‐2011: Partial recovery of wages with labor flexibility persistence

    Directory of Open Access Journals (Sweden)

    Sebastián Guevara

    2012-12-01

    Full Text Available A partir del año 2004 el accionar gremial de los trabajadores de las empresas terminales en Argentina creció en visibilidad. A través de la creciente negociación colectiva pero también de, asambleas en los lugares de trabajo, manifestaciones públicas, movilizaciones y huelgas, la reactivación de los conflictos gremiales encabezados por los trabajadores fue dando forma al freno que experimentó la tendencia decreciente que presentaban tanto el empleo como los salarios en el sector. Sin embargo, a pesar de esta creciente movilización y sus resultados en términos de empleo y salarios, las bases de las negociaciones no parecen haberse modificado de modo sustancial. Es decir, el conjunto de condiciones flexibilizadas de compra y uso de la fuerza de trabajo mantienen su vigencia (y en algunos casos se profundizaron. Esta situación se puso de manifiesto en la crisis que experimentó el sector entre 2008 y 2009, frente a la cual las empresas apelaron a las herramientas flexibles (e incluso aprovecharon la situación para profundizar su desarrollo. La resistencia de los trabajadores frente a la crisis dejó en evidencia, también, las críticas a la dirección sindical que se desarrollaron en los lugares de trabajo. En este trabajo se presenta un análisis de los conflictos laborales desarrollados en la industria terminal automotriz argentina entre 2004 y 2011. Así como de algunos de los resultados de estos conflictos en cuanto a: la evolución salarial, el proceso de flexibilización laboral y la política sindical.Since 2004 the power of the workers union of auto makers in Argentina grew in visibility. Through collective bargaining, but also increasing of, assemblies in workplaces, public demonstrations, protests and strikes, the revival of labor conflicts led by the workers was giving way to brake the downward trend experienced both employment had as wages in the sector. However, despite this growing movement and results in terms of

  2. preescolares desnutridos con madres con obesidad y sin obesidad

    Directory of Open Access Journals (Sweden)

    Viridiana Vanessa Conzuelo-González

    2009-01-01

    Full Text Available El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un estudio transversal (2006-2007, en la comunidad mazahua de San Francisco Tepeolulco, Municipio de Temascalcingo; que incluyó a 85 hogares integrados por preescolares con desnutrición inscritos al programa Oportunidades. Se determinó el estado nutrición de los preescolares con indicadores antropométricos y se obtuvo el IMC de las madres de estos infantes. Se aplicó una encuesta socionutricional, incluida el recordatorio de 24 horas, y complementado con la observación participante (cualitativa. Se encontró que 83% de las madres mazahuas presentaron sobrepeso u obesidad. El estado de nutrición de los preescolares con madres con obesidad presentó un porcentaje mayor de desnutrición (76%. En la variable género, se encontró que 54% de los niños con madres con obesidad tenía baja talla. Al relacionar el nivel educativo de la madre, esta variable resultó ser estadísticamente significativa (p=0.015, donde el analfabetismo está más relacionado con la desnutrición infantil que tienen madres de bajo y/o peso normal. La elevada prevalencia de hogares conformados con preescolares con desnutrición y madres con obesidad, es un síntoma más de la pobreza en zonas indígenas en México, con bajo índice de desarrollo humano.

  3. On flexible and rigid nouns

    DEFF Research Database (Denmark)

    Rijkhoff, Jan

    2010-01-01

    classes. Finally this article wants to claim that the distinction between rigid and flexible noun categories (a) adds a new dimension to current classifications of parts of speech systems, (b) correlates with certain grammatical phenomena (e.g. so-called number discord), and (c) helps to explain the parts......This article argues that in addition to the major flexible lexical categories in Hengeveld’s classification of parts of speech systems (Contentive, Non-Verb, Modifier), there are also flexible word classes within the rigid lexical category Noun (Set Noun, Sort Noun, General Noun). Members...... by the flexible item in the external world. I will then argue that flexible word classes constitute a proper category (i.e. they are not the result of a merger of some rigid word classes) in that members of flexible word categories display the same properties regarding category membership as members of rigid word...

  4. On flexible and rigid nouns

    DEFF Research Database (Denmark)

    Rijkhoff, Jan

    2008-01-01

    Studies in Language 32-3 (2008), 727-752. Special issue: Parts of Speech: Descriptive tools, theoretical constructs Jan Rijkhoff - On flexible and rigid nouns This article argues that in addition to the flexible lexical categories in Hengeveld’s classification of parts-of-speech systems (Contentive......, Non-Verb, Modifier), there are also flexible word classes within the rigid lexical category Noun (Set Noun, Sort Noun, General Noun). Members of flexible word classes are characterized by their vague semantics, which in the case of nouns means that values for the semantic features Shape...... and Homogeneity are either left undetermined or they are specified in such a way that they do not quite match the properties of the kind of entity denoted by the flexible item in the external world. I will then argue that flexible word classes constitute a proper category (i.e. they are not the result of a merger...

  5. Flexible Language Interoperability

    DEFF Research Database (Denmark)

    Ekman, Torbjörn; Mechlenborg, Peter; Schultz, Ulrik Pagh

    2007-01-01

    Virtual machines raise the abstraction level of the execution environment at the cost of restricting the set of supported languages. Moreover, the ability of a language implementation to integrate with other languages hosted on the same virtual machine typically constrains the features...... of the language. In this paper, we present a highly flexible yet efficient approach to hosting multiple programming languages on an object-oriented virtual machine. Our approach is based on extending the interface of each class with language-specific wrapper methods, offering each language a tailored view...... of a given class. This approach can be deployed both on a statically typed virtual machine, such as the JVM, and on a dynamic virtual machine, such as a Smalltalk virtual machine. We have implemented our approach to language interoperability on top of a prototype virtual machine for embedded systems based...

  6. Flexible cultural repertoires

    DEFF Research Database (Denmark)

    Lindegaard, Marie Rosenkrantz; Zimmermann, Francisca

    2017-01-01

    Despite extensive studies of street culture and the risks of offending and victimization in urban marginalized areas, little is known about the role of cultural repertoires for variation in victimization risks among young men not involved in crime. Based on two ethnographic studies, conducted...... independently of the authors in neighbouring township areas of Cape Town, we offer insights into patterns of victimization among young men not involved in crime who live and attend school in the townships. Young men WHO perform decent cultural repertoires are highly exposed to victimization due to their moral...... rejection of crime-involved youth. Young men who perform flexible cultural repertoires, by incorporating and shifting between gang and decent repertoires, experience low victimization due to their adaptation to crime-involved youth. Findings emphasize the importance of detailed investigations of the way...

  7. Flexible helical yarn swimmers.

    Science.gov (United States)

    Zakharov, A P; Leshansky, A M; Pismen, L M

    2016-09-01

    We investigate the motion of a flexible Stokesian flagellar swimmer realised as a yarn made of two intertwined elastomer fibres, one active, that can reversibly change its length in response to a local excitation causing transition to the nematic state or swelling, and the other one, a passive isotropic elastomer with identical mechanical properties. A propagating chemical wave may provide an excitation mechanism ensuring a constant length of the excited region. Generally, the swimmer moves along a helical trajectory, and the propagation and rotation velocity are very sensitive to the ratio of the excited region to the pitch of the yarn, as well as to the size of a carried load. External excitation by a moving actuating beam is less effective, unless the direction of the beam is adjusted to rotation of the swimmer.

  8. Flexible weapons architecture design

    Science.gov (United States)

    Pyant, William C., III

    Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilian casualties. This thesis shows that the architecture design factors of damage mechanism, fusing, weapons weight, guidance, and propulsion are significant in enhancing weapon performance objectives, and would benefit from modularization. Additionally, this thesis constructs an algorithm that can be used to design a weapon set for a particular target class based on these modular components.

  9. Conformational flexibility of aspartame.

    Science.gov (United States)

    Toniolo, Claudio; Temussi, Pierandrea

    2016-05-01

    L-Aspartyl-L-phenylalanine methyl ester, better known as aspartame, is not only one of the most used artificial sweeteners, but also a very interesting molecule with respect to the correlation between molecular structure and taste. The extreme conformational flexibility of this dipeptide posed a huge difficulty when researchers tried to use it as a lead compound to design new sweeteners. In particular, it was difficult to take advantage of its molecular model as a mold to infer the shape of the, then unknown, active site of the sweet taste receptor. Here, we follow the story of the 3D structural aspects of aspartame from early conformational studies to recent docking into homology models of the receptor. © 2016 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 376-384, 2016. © 2016 Wiley Periodicals, Inc.

  10. Cálculo racional de firmes flexibles

    Directory of Open Access Journals (Sweden)

    Kucera, Karel

    1970-03-01

    Full Text Available The authors states the need to develop a method of designing flexible pavements which approach optimum functional and low cost solutions. This paper brings up to date the problem of calculating the various dimensions of a pavement, and it describes eight methods which are being currently used. Suitable charts and diagrams are also included. Professor Kucera concludes that these methods, of rational or empirical basis, in spite of their varying initial concepts and data, finally give comparable results regarding the calculation of the pavement thickness.Expone el autor la necesidad de llegar a un método de cálculo de firmes flexibles que nos acerque a soluciones óptimas en el aspecto económico-funcional. El trabajo es una puesta al día del problema del dimensionamiento, que se define en la breve descripción de ocho métodos actualmente en uso, ilustrada con los correspondientes ábacos o diagramas. La conclusión del Prof. Kucera es que estos métodos, de base racional o empírica, a pesar de sus diferentes concepciones y datos de partida, ofrecen resultados comparables para el cálculo de espesores del firme.

  11. autorregulado con estudiantes universitarios

    Directory of Open Access Journals (Sweden)

    Jairo Andrés Montes

    2005-01-01

    Full Text Available El propósito del presente estudio es describir la forma en la que se presentan los procesos de aprendizaje autorregulado con un grupo de estudiantes (22 estudiantes de tercer semestre de Psicología de la PUJ, Cali, en el evento de preparación para la presentación un examen. Asimismo se describen las correlaciones que ocurren entre las distintas fases de dicho proceso de autorregulación del aprendizaje. Para conseguir los objetivos propuestos se ha hecho uso de una observación de desempeño en tiempo real, es decir, de la observación durante una sesión de preparación de examen de los estudiantes, en la cual se emplearon protocolos verbales para dar cuenta de lo que «pasaba por su mente» mientras estudiaban. Una entrevista semi-estructurada y una prueba objetiva. Los resultados fueron analizados a la luz del modelo mixto de procesamiento de información y constructivismo abordado por Winne(1998. Como resultado se encontró una relación significativa entre los niveles de desempeño en el proceso de ARR y el resultado del examen. Igualmente se encontraron bajos niveles de regulación en una parte importante de la muestra y un desfase significativo entre conocimiento declarativo de ARR y desempeño en el mismo

  12. Special Issue: Flexible Work Arrangements.

    Science.gov (United States)

    Olmstead, Barney, Ed.

    1996-01-01

    Section 1 contains five chapters on flexible work arrangements, self-employment, working from home, part-time professionals, job sharing, and temporary employment. Section 2 includes reviews of four books on working flexibly, concluding with a list of 23 additional readings. (SK)

  13. Sensor Technologies on Flexible Substrates

    Science.gov (United States)

    Koehne, Jessica

    2016-01-01

    NASA Ames has developed sensor technologies on flexible substrates integrated into textiles for personalized environment monitoring and human performance evaluation. Current technologies include chemical sensing for gas leak and event monitoring and biological sensors for human health and performance monitoring. Targeted integration include next generation EVA suits and flexible habitats.

  14. Functional aspects of protein flexibility

    DEFF Research Database (Denmark)

    Teilum, Kaare; Olsen, Johan G; Kragelund, Birthe B

    2009-01-01

    this into an intuitive perception of protein function is challenging. Flexibility is of overwhelming importance for protein function, and the changes in protein structure during interactions with binding partners can be dramatic. The present review addresses protein flexibility, focusing on protein-ligand interactions...

  15. Flexible ring seal

    International Nuclear Information System (INIS)

    Abbes, Claude; Gournier, Andre; Rouaud, Christian; Villepoix, Raymond de.

    1976-01-01

    The invention concerns a flexible metal ring seal, able to ensure a perfect seal between two bearings due to the crushing and elastic deformation properties akin to similar properties in elastomers. Various designs of seal of this kind are already known, particularly a seal made of a core formed by a helical wire spring with close-wound turns and with high axial compression ratio, closed on itself and having the shape of an annulus. This wire ring is surrounded by at least one envelope having at rest the shape of a toroidal surface of which the generating circle does not close on itself. In a particular design mode, the seal in question can include, around the internal spring, two envelopes of which one in contact with the spring is composed of a low ductility elastic metal, such as mild steel or stainless steel and the other is, on the contrary, made of a malleable metal, such as copper or nickel. The first envelope evenly distributes the partial crushing of the spring, when the seal is tightened, on the second envelope which closely fits the two surfaces between which the seal operates. The stress-crushing curve characteristic of the seal comprises two separate parts, the first with a relatively sharp slope corresponds to the start of the seal compression phase, enabling at least some of these curves to reach the requisite seal threshold very quickly, then, beyond this, a second part, practically flat, where the stress is appreciably constant for a wide operating bracket [fr

  16. Flexible piezotronic strain sensor.

    Science.gov (United States)

    Zhou, Jun; Gu, Yudong; Fei, Peng; Mai, Wenjie; Gao, Yifan; Yang, Rusen; Bao, Gang; Wang, Zhong Lin

    2008-09-01

    Strain sensors based on individual ZnO piezoelectric fine-wires (PFWs; nanowires, microwires) have been fabricated by a simple, reliable, and cost-effective technique. The electromechanical sensor device consists of a single electrically connected PFW that is placed on the outer surface of a flexible polystyrene (PS) substrate and bonded at its two ends. The entire device is fully packaged by a polydimethylsiloxane (PDMS) thin layer. The PFW has Schottky contacts at its two ends but with distinctly different barrier heights. The I- V characteristic is highly sensitive to strain mainly due to the change in Schottky barrier height (SBH), which scales linear with strain. The change in SBH is suggested owing to the strain induced band structure change and piezoelectric effect. The experimental data can be well-described by the thermionic emission-diffusion model. A gauge factor of as high as 1250 has been demonstrated, which is 25% higher than the best gauge factor demonstrated for carbon nanotubes. The strain sensor developed here has applications in strain and stress measurements in cell biology, biomedical sciences, MEMS devices, structure monitoring, and more.

  17. Orthogonal flexible Rydberg aggregates

    Science.gov (United States)

    Leonhardt, K.; Wüster, S.; Rost, J. M.

    2016-02-01

    We study the link between atomic motion and exciton transport in flexible Rydberg aggregates, assemblies of highly excited light alkali-metal atoms, for which motion due to dipole-dipole interaction becomes relevant. In two one-dimensional atom chains crossing at a right angle adiabatic exciton transport is affected by a conical intersection of excitonic energy surfaces, which induces controllable nonadiabatic effects. A joint exciton-motion pulse that is initially governed by a single energy surface is coherently split into two modes after crossing the intersection. The modes induce strongly different atomic motion, leading to clear signatures of nonadiabatic effects in atomic density profiles. We have shown how this scenario can be exploited as an exciton switch, controlling direction and coherence properties of the joint pulse on the second of the chains [K. Leonhardt et al., Phys. Rev. Lett. 113, 223001 (2014), 10.1103/PhysRevLett.113.223001]. In this article we discuss the underlying complex dynamics in detail, characterize the switch, and derive our isotropic interaction model from a realistic anisotropic one with the addition of a magnetic bias field.

  18. SOCMA study urges flexibility

    International Nuclear Information System (INIS)

    Kirschner, E.

    1993-01-01

    In implementing the 1990 Pollution Prevention Act, regulators and legislators should hold off on cookie-cutter, numerical goal-based requirements to allow for site and process specific programs, says a study sponsored by the Synthetic Organic Chemicals Manufacturers Association (SOCMA; Washington). Companies should have that flexibility to target their resources toward those activities that reduce pollution cost effectively, says SOCMA environmental quality committee chairman Art Gillen, who is also BASF director of environmental regulatory affairs. The study - conducted by Woodward-Clyde Consultants (Denver) - examines four batch and custom chemical manufacturing films. As in the Clean Air Act, the batch processing of SOCMA-member plants should be considered in new regulations, Gillen says. For example, the study found that most wastes are from shutdowns and cleanouts, and there are frequent charges in waste streams and raw materials. Those characteristics do not lend themselves to annual reduction goals. Also, specific goals could have a wide range of costs: measures to reduce stack air emissions run from $18/lb to $1,106/lb. SOCMA says it will present the study to Congress and the Environmental Protection Agency

  19. Integrated engineering increases flexibility

    International Nuclear Information System (INIS)

    Smith, Ray

    1991-01-01

    Integrated Engineering (IE) can be used to describe the best use of increasingly rare good engineering talent in an increasingly competive world. A number of organisations are now moving towards IE without any general agreement on a precise definition. The engineering division of British Nuclear Fuels (BNFL) is one such organisation. This feature covers the reasoning behind the decision, and our experience to date. BNFL engineering division is responsible primarily for the provision of major facilities on BNFL operational sites. This provision includes feasibility, front end and detailed design, procurement, installation and commissioning. Task force working has been used for some of the large projects. But the future workload is expected to comprise many more smaller projects. At the same time, equipment is becoming more complex and the need for mutual understanding and appreciation between disciplines is increasing. To meet this increasing need for flexibility, BNFL has decided to move to the matrix structure of project management and functional departments described in the article. (Author)

  20. Puentes con vigas pretensadas

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1965-07-01

    Full Text Available This paper describes one of the three bridges which Hidrocivil, S. A., has built in Catalonia (northern Spain, over the river Ripoll. The other two bridges are very similar to this one, both in construction and design, and show only minor adjustments to the local topography. The contracting firm proposed several alterations in the prefabrication and constructional procedure, in relation to the initial project, and these changes were accepted. The main feature of these projects is the use of prestressed beams, built at the workshop in sections, and joined together by means of sixty 7 mm cables in each beam. As the shear forces are more acute at the joints, the end of each section has a kind of diaphragm, to provide a large contact area, and hence greater surface to transmit the shear forces. The methods of construction are also of interest. Briefly, they involve building the bridge piles, and use these to support a provisional structure with transversal movement. This provisional structure, in turn, served as platform for two bridge cranes, which lifted the girders to their final location. After the first span was completed, the deck was concreted and the auxiliary structure pushed forward to the next span, to repeat the same operations. This arrangement saved the use of provisional framework.En este trabajo se describe uno de los tres puentes que Hidrocivil, S. A., ha construido.—previo concurso— en la región catalana; concretamente, el que salva el río Ripoll. Los otros dos no han sido objeto de descripción general por ser muy similares, en lo que a ejecución y concepción se refiere, con la única variante que presentan las características topográficas locales. La empresa propuso ciertas variantes— que fueron aceptadas— en la prefabricación y métodos de construcción. El interés de estas obras se centra en el empleo de vigas pretensadas, prefabricadas en taller por trozos, y solidarizados en el mismo mediante las operaciones

  1. Violencia con el anciano

    Directory of Open Access Journals (Sweden)

    Rita Campillo Motilva

    2002-08-01

    Full Text Available La violencia doméstica es tan antigua como la humanidad misma y se reconocen la violencia infantil, contra la mujer y al anciano, fundamentalmente; siendo este último grupo una población en ascenso por las mayores expectativas de vida de los últimos años. Como resultado de ello, el número de casos de abuso en el anciano se incrementará y el impacto de este abuso sobre la salud debe ser considerado de forma adecuada. La gama de maltratos es variadísima e incluye el abuso físico, emocional, financiero, sexual, por negligencia, negación a brindarle ayuda y otras formas más. Los ancianos con deterioro cognitivo son los más vulnerables. El médico en la atención primaria de salud es un pilar importante en la prevención y educación de este problema.Domestic violence is as old as humanity itself. Child, women and elderly abuse are mainly recognized. The elderly group is increasing due to the higher life expectancy experimented during the last years. As a result, the number of battered elderly will grow and the impact of this abuse on health should be adequately considered. The range of abuse is very wide and it includes physical, emotional, financial and sexual abuse, negligence, rejection to give assistance and others. The elderly with cognitive deterioration are the most vulnerable. The physician at the primary health care level is an important milestone in the prevention and education of this problem.

  2. Flexibility in fuel manufacturing

    International Nuclear Information System (INIS)

    Reparaz, A.; Stavig, W.E.; McLees, R.B.

    1987-01-01

    From its inception Exxon Nuclear has produced both BWR and PWR fuels. This is reflected in a product line that, to date, includes over 20 fuel designs. These range from 6x6 design at one end of the spectrum to the recently introduced 17x17 design. The benefits offered include close tailoring of the fuel design to match the customer's requirements, and the ability to rapidly introduce product changes, such as the axial blanket design, with a minimal impact on manufacturing. This flexibility places a number of demands on the manufacturing organization. Close interfaces must be established, and maintained, between the marketing, product design, manufacturing, purchasing and quality organizations, and the information flows must be immediate and accurate. Production schedules must be well planned and must be maintained or revised to reflect changing circumstances. Finally, the manufacturing facilities must be designed to allow rapid switchover between product designs with minor tooling changes and/or rerouting of product flows to alternate work stations. Among the tools used to manage the flow of information and to maintain the tight integration necessary between the various manufacturing, engineering and quality organizations is a commercially available, computerized planning and tracking system, AMAPS. A real-time production data collection system has been designed which gathers data from each production work station for use by the shop floor control module of AMAPS. Accuracy of input to the system is improved through extensive use of bar codes to gather information on the product as it moves through and between work stations. This computerized preparation of material tracing has an impact on direct manufacturing records, quality control records, nuclear material records and accounting and inventory records. This is of benefit to both Exxon Nuclear and its customers

  3. Incentivizing Flexibility in System Operations

    Energy Technology Data Exchange (ETDEWEB)

    Milligan, Michael [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bloom, Aaron P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Townsend, Aaron [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ela, Erik [Electric Power Research Institute; Botterud, Audun [Argonne National Laboratory; Levin, Todd [Argonne National Laboratory

    2018-02-15

    Defining flexibility has been a challenge that a number of industry members and researchers have attempted to address in recent years. With increased variability and uncertainty of variable generation (VG), the resources on the system will have to be more flexible to adjust output, so that power output ranges, power ramp rates, and energy duration sustainability are sufficient to meet the needs of balancing supply with demand at various operational timescales. This chapter discusses whether existing market designs provide adequate incentives for resources to offer their flexibility into the market to meet the increased levels of variability and uncertainty introduced by VG in the short-term operational time frame. It presents a definition of flexibility and discusses how increased levels of VG require increased needs for flexibility on power systems. Following this introductory material, the chapter examines how existing market designs ensure that resources have the right incentives to provide increased flexibility, and then discusses a number of emerging market design elements that impact flexibility incentives.

  4. Aggregating and Disaggregating Flexibility Objects

    DEFF Research Database (Denmark)

    Siksnys, Laurynas; Valsomatzis, Emmanouil; Hose, Katja

    2015-01-01

    In many scientific and commercial domains we encounter flexibility objects, i.e., objects with explicit flexibilities in a time and an amount dimension (e.g., energy or product amount). Applications of flexibility objects require novel and efficient techniques capable of handling large amounts...... and aiming at energy balancing during aggregation. In more detail, this paper considers the complete life cycle of flex-objects: aggregation, disaggregation, associated requirements, efficient incremental computation, and balance aggregation techniques. Extensive experiments based on real-world data from...

  5. Flexible Thermoelectric Generators on Silicon Fabric

    KAUST Repository

    Sevilla, Galo T.

    2012-01-01

    In this work, the development of a Thermoelectric Generator on Flexible Silicon Fabric is explored to extend silicon electronics for flexible platforms. Low cost, easily deployable plastic based flexible electronics are of great interest for smart

  6. Flexibility of trunnion piping elbows

    International Nuclear Information System (INIS)

    Lewis, G.D.; Chao, Y.J.

    1987-01-01

    Flexibility factors and stress indices for piping component such as straight pipe, elbows, butt-welding tees, branch connections, and butt-welding reducers are contained in the code, but many of the less common piping components, like the trunnion elbow, do not have flexibility factors or stress indices defined. The purpose of this paper is to identify the in-plane and out-of-plane flexibility factors in accordance with code procedures for welded trunnions attached to the tangent centerlines of long radius elbows. This work utilized the finite element method as applicable to plates and shells for calculating the relative rotations of the trunnion elbow-ends for in-plane and out-of-plane elbow moment loadings. These rotations are used to derive the corresponding in-plane and out-of-plane flexibility factors. (orig./GL)

  7. Distributed flexibility in inertial swimmers

    Science.gov (United States)

    Floryan, Daniel; Rowley, Clarence W.; Smits, Alexander J.

    2017-11-01

    To achieve fast and efficient swimming, the flexibility of the propulsive surfaces is an important feature. To better understand the effects of distributed flexibility (either through inhomogeneous material properties, varying geometry, or both) we consider the coupled solid and fluid mechanics of the problem. Here, we develop a simplified model of a flexible swimmer, using Euler-Bernoulli theory to describe the solid, Theodorsen's theory to describe the fluid, and a Blasius boundary layer to incorporate viscous effects. Our primary aims are to understand how distributed flexibility affects the thrust production and efficiency of a swimmer with imposed motion at its leading edge. In particular, we examine the modal shapes of the swimmer to gain physical insight into the observed trends. Supported under ONR MURI Grant N00014-14-1-0533, Program Manager Robert Brizzolara.

  8. Acne polimorfo: tratamiento con Implacen

    Directory of Open Access Journals (Sweden)

    Rubén Pérez Armas

    1995-06-01

    Full Text Available Se realiza el estudio de 40 pacientes con acné polimorfo, los que fueron atendidos en la Consulta de Dermatología del Hospital Provincial Clinicoquirúrgico Docente "Celia Sánchez Manduley", en el período comprendido de enero de 1988 a diciembre de 1989. Se revisa la literatura médica sobre los diversos métodos y medicamentos utilizados en la terapéutica de esta dermatosis. Se describe el esquema de tratamiento empleado con implacén en 30 pacientes; los 10 restantes se trataron con placebo; se compara dicho esquema con los tradicionales y se observan mejores resultados con nuestro estudio. Se destaca la ausencia de recaídas, así como el resultado del tratamiento de acuerdo con el sexo.A study was performed in 40 patients presenting with polymorphic acne who were attended in the Dermatology Department of "Celia Sánchez Manduley" Clinicosurgical and Teaching Hospital from January, 1988 to December, 1989. A review of the literature was made seeking for the different methods and drugs used for the treatment of this dermatosis. The treatment schedule with the use of implacen in 30 patients is described. Such therapeutic schedule was compared with traditional ones and better results were observed with the use of implacen. The fact that there were no relapses is highlighted, as well as the result of treatment according to sex.

  9. Determinants of flexible work arrangements

    OpenAIRE

    Sarbu, Miruna

    2014-01-01

    Flexible work arrangements such as allowing employees to work at home are used in firms, especially since information and communication technologies have become so widespread. Using individual-level data from 10,884 German employees, this paper analyses the determinants of working at home as a form of flexible work arrangements. The analysis is based on descriptive analyses and a discrete choice model using a probit estimation approach. The results reveal that men have a higher...

  10. Workplace flexibility across the lifespan

    OpenAIRE

    Bal, Pieter; Jansen, Paul G W

    2016-01-01

    As demographic changes impact the workplace, governments, organizations and workers arelooking for ways to sustain optimal working lives at higher ages. Workplace flexibility has beenintroduced as a potential way workers can have more satisfying working lives until theirretirement ages. This paper presents a critical review of the literature on workplace flexibilityacross the lifespan. It discusses how flexibility has been conceptualized across differentdisciplines, and postulates a definitio...

  11. Flexible packaging for PV modules

    Science.gov (United States)

    Dhere, Neelkanth G.

    2008-08-01

    Economic, flexible packages that provide needed level of protection to organic and some other PV cells over >25-years have not yet been developed. However, flexible packaging is essential in niche large-scale applications. Typical configuration used in flexible photovoltaic (PV) module packaging is transparent frontsheet/encapsulant/PV cells/flexible substrate. Besides flexibility of various components, the solder bonds should also be flexible and resistant to fatigue due to cyclic loading. Flexible front sheets should provide optical transparency, mechanical protection, scratch resistance, dielectric isolation, water resistance, UV stability and adhesion to encapsulant. Examples are Tefzel, Tedlar and Silicone. Dirt can get embedded in soft layers such as silicone and obscure light. Water vapor transmittance rate (WVTR) of polymer films used in the food packaging industry as moisture barriers are ~0.05 g/(m2.day) under ambient conditions. In comparison, light emitting diodes employ packaging components that have WVTR of ~10-6 g/(m2.day). WVTR of polymer sheets can be improved by coating them with dense inorganic/organic multilayers. Ethylene vinyl acetate, an amorphous copolymer used predominantly by the PV industry has very high O2 and H2O diffusivity. Quaternary carbon chains (such as acetate) in a polymer lead to cleavage and loss of adhesional strength at relatively low exposures. Reactivity of PV module components increases in presence of O2 and H2O. Adhesional strength degrades due to the breakdown of structure of polymer by reactive, free radicals formed by high-energy radiation. Free radical formation in polymers is reduced when the aromatic rings are attached at regular intervals. This paper will review flexible packaging for PV modules.

  12. Flexible forms of working hours

    OpenAIRE

    Knapp, Viktor

    2017-01-01

    66 Abstract - Flexible forms of working hours This diploma thesis deals with the flexible forms of working hours and its goal is to describe this issue in intelligible and comprehensive way. It is being very interesting and current theme which is to a great extent not subject to direct legal regulations and provides its contracting parties with a big amount of freedom of contract. This fact assists in bigger flexibilization of labour market and represents a significant instrument in the fight...

  13. Developmental constraints on behavioural flexibility.

    Science.gov (United States)

    Holekamp, Kay E; Swanson, Eli M; Van Meter, Page E

    2013-05-19

    We suggest that variation in mammalian behavioural flexibility not accounted for by current socioecological models may be explained in part by developmental constraints. From our own work, we provide examples of constraints affecting variation in behavioural flexibility, not only among individuals, but also among species and higher taxonomic units. We first implicate organizational maternal effects of androgens in shaping individual differences in aggressive behaviour emitted by female spotted hyaenas throughout the lifespan. We then compare carnivores and primates with respect to their locomotor and craniofacial adaptations. We inquire whether antagonistic selection pressures on the skull might impose differential functional constraints on evolvability of skulls and brains in these two orders, thus ultimately affecting behavioural flexibility in each group. We suggest that, even when carnivores and primates would theoretically benefit from the same adaptations with respect to behavioural flexibility, carnivores may nevertheless exhibit less behavioural flexibility than primates because of constraints imposed by past adaptations in the morphology of the limbs and skull. Phylogenetic analysis consistent with this idea suggests greater evolutionary lability in relative brain size within families of primates than carnivores. Thus, consideration of developmental constraints may help elucidate variation in mammalian behavioural flexibility.

  14. con mala calidad de vida

    Directory of Open Access Journals (Sweden)

    Agustín Martín-Rodríguez

    2007-01-01

    Full Text Available En este estudio ex post facto se ha analizado si los familiares de pacientes con mala calidad de vida presentan diferencias en las variables clínicas de personalidad y relaciones familiares en función de que el paciente haya estado o no ingresado en una Unidad de Cuidados Intensivos. Seleccionamos dos grupos: 29 familiares de pacientes traumatizados graves transcurridos cuatro años de su ingreso en una UCI de Traumatología y con mala calidad de vida (debido a secuelas físicas y/o psicológicas tras el ingreso, tales como traumatismos craneoencefálicos, politraumatismos y tetraplejias traumáticas y 32 familiares de pacientes con mala calidad de vida con cuatro años de evolución de su enfermedad física (hipertensión, diabetes, artritis reumatoide y síndrome de intestino irritable que no han estado ingresados en la UCI. Para alcanzar nuestro objetivo empleamos una Encuesta Psicosocial y los siguientes instrumentos: Cuestionario de Análisis Clínico, Escala de Clima Social en la Familia y Escala de Adaptación Psicosocial de la Enfermedad. Los resultados mostraron que los familiares de pacientes con mala calidad de vida que estuvieron ingresados en la UCI hace cuatro años, presentan diferencias significativas en las variables agitación y expresividad comparados con los familiares de pacientes con mala calidad de vida que no han estado ingresados en la UCI.

  15. Fracturas de cadera y diáfisis femoral ipsilaterales

    OpenAIRE

    García de Quevedo Puerta, D.; Sesma Solis, P. J.; Fernandez Garcia, L.; Fernández de Córdova, G.

    1995-01-01

    Se aportan 10 casos de fracturas de cadera y diáfisis femoral ipsilaterales tratados quirúrgicamente de forma diferida con un tiempo medio de demora de 12 días (rango: 3 a 22 días). Nueve fracturas diafisarias fueron tratadas con placa AO de fémur, y una, donde la fractura de cadera asociada pasó inicialmente inadvertida, mediante un clavo de Küntscher. Las fracturas de cadera se fijaron con tornillos de esponjosa (8 casos) o clavo-placa de Richards (2 casos). En todos los paci...

  16. Path connectivity based spectral defragmentation in flexible bandwidth networks.

    Science.gov (United States)

    Wang, Ying; Zhang, Jie; Zhao, Yongli; Zhang, Jiawei; Zhao, Jie; Wang, Xinbo; Gu, Wanyi

    2013-01-28

    Optical networks with flexible bandwidth provisioning have become a very promising networking architecture. It enables efficient resource utilization and supports heterogeneous bandwidth demands. In this paper, two novel spectrum defragmentation approaches, i.e. Maximum Path Connectivity (MPC) algorithm and Path Connectivity Triggering (PCT) algorithm, are proposed based on the notion of Path Connectivity, which is defined to represent the maximum variation of node switching ability along the path in flexible bandwidth networks. A cost-performance-ratio based profitability model is given to denote the prons and cons of spectrum defragmentation. We compare these two proposed algorithms with non-defragmentation algorithm in terms of blocking probability. Then we analyze the differences of defragmentation profitability between MPC and PCT algorithms.

  17. Tratamiento con implantes Leader-Nano en paciente con oligodoncia

    Directory of Open Access Journals (Sweden)

    Salvador Javier Santos Medina

    2015-03-01

    Full Text Available Los implantes dentales de titanio han revolucionado el mundo de la rehabilitación desde su surgimiento. De manera particular, el empleo de implantes de carga inmediata acorta el tiempo quirúrgico y protésico, con el consiguiente bienestar estético. Se presenta el caso de una paciente femenina de 32 años de edad, con antecedentes de oligodoncia de ambos incisivos laterales superiores y portadora de prótesis parcial acrílica. Fue atendida por el equipo multidisciplinario de implantes en la Clínica Estomatológica Docente “3 de Octubre” y se le realizó tratamiento de rehabilitación integral con implantes Leader-Nano y prótesis fija con corona acrílica sobre dichos implantes. La implantología fue satisfactoria en la paciente; la mejoría estética y funcional, así como la satisfacción de la paciente, fueron los principales logros obtenidos

  18. Wearable Flexible Sensors: A Review

    KAUST Repository

    Nag, Anindya

    2017-05-18

    The paper provides a review on some of the significant research work done on wearable flexible sensors (WFS). Sensors fabricated with flexible materials have been attached to a person along with the embedded system to monitor a parameter and transfer the significant data to the monitoring unit for further analyses. The use of wearable sensors has played a quite important role to monitor physiological parameters of a person to minimize any malfunctioning happening in the body. The paper categorizes the work according to the materials used for designing the system, the network protocols and different types of activities that were being monitored. The challenges faced by the current sensing systems and future opportunities for the wearable flexible sensors regarding its market values are also briefly explained in the paper.

  19. Wearable Flexible Sensors: A Review

    KAUST Repository

    Nag, Anindya; Mukhopadhyay, Subhas Chandra; Kosel, Jü rgen

    2017-01-01

    The paper provides a review on some of the significant research work done on wearable flexible sensors (WFS). Sensors fabricated with flexible materials have been attached to a person along with the embedded system to monitor a parameter and transfer the significant data to the monitoring unit for further analyses. The use of wearable sensors has played a quite important role to monitor physiological parameters of a person to minimize any malfunctioning happening in the body. The paper categorizes the work according to the materials used for designing the system, the network protocols and different types of activities that were being monitored. The challenges faced by the current sensing systems and future opportunities for the wearable flexible sensors regarding its market values are also briefly explained in the paper.

  20. Living in a Flexible Space

    Science.gov (United States)

    Canepa, Simona

    2017-10-01

    How long does a space or an object have to last? If in the past an object or a building manufacturing was designed to last as much as possible, nowadays it is designed to have a life related to the time in which it will be used. Flexibility is what characterizes a space, it’s the ability to be variable and adaptable to changes in the lives of users or in relation to the use which these will make over time. The evolution of the labour market, the difficulty of inserting within it and the need to push more and more frequent move today in the trial of living space models increasingly flexible: people, especially young people, are forced to move on territory outlining a new condition to which the flexible nomadic dwellings offer an adequate response, ensuring high functional performance in confined spaces.

  1. Balancing energy flexibilities through aggregation

    DEFF Research Database (Denmark)

    Valsomatzis, Emmanouil; Hose, Katja; Pedersen, Torben Bach

    2014-01-01

    One of the main goals of recent developments in the Smart Grid area is to increase the use of renewable energy sources. These sources are characterized by energy fluctuations that might lead to energy imbalances and congestions in the electricity grid. Exploiting inherent flexibilities, which exist...... in both energy production and consumption, is the key to solving these problems. Flexibilities can be expressed as flex-offers, which due to their high number need to be aggregated to reduce the complexity of energy scheduling. In this paper, we discuss balance aggregation techniques that already during...... aggregation aim at balancing flexibilities in production and consumption to reduce the probability of congestions and reduce the complexity of scheduling. We present results of our extensive experiments....

  2. FLEXIBLE BUDGET OF SPORT COMPETITIONS

    Directory of Open Access Journals (Sweden)

    Dragan Vukasović

    2009-11-01

    Full Text Available Manager of sport competition has right to decide and also to take responsibility for costs, income and financial results. From economic point of wiev flexible budget and planning cost calculations is top management base for analyzing success level of sport competition. Flexible budget is made before sport competition with few output level, where one is always from static plan-master plan. At the end of competition when we have results, we make report of plan executing and we also analyzing plan variances. Results of comparation between achieved and planning level of static budget can be acceptable if achieved level is approximate to budget level or if we analyzing results from gross or net income. Flexible budget become very important in case of world eco- nomic crises

  3. Flexible Query Answering Systems 2006

    DEFF Research Database (Denmark)

    -computer interaction. The overall theme of the FQAS conferences is innovative query systems aimed at providing easy, flexible, and intuitive access to information. Such systems are intended to facilitate retrieval from information repositories such as databases, libraries, and the World-Wide Web. These repositories......This volume constitutes the proceedings of the Seventh International Conference on Flexible Query Answering Systems, FQAS 2006, held in Milan, Italy, on June 7--10, 2006. FQAS is the premier conference for researchers and practitioners concerned with the vital task of providing easy, flexible...... are typically equipped with standard query systems which are often inadequate, and the focus of FQAS is the development of query systems that are more expressive, informative, cooperative, and productive. These proceedings contain contributions from invited speakers and 53 original papers out of about 100...

  4. Flexible wings in flapping flight

    Science.gov (United States)

    Moret, Lionel; Thiria, Benjamin; Zhang, Jun

    2007-11-01

    We study the effect of passive pitching and flexible deflection of wings on the forward flapping flight. The wings are flapped vertically in water and are allowed to move freely horizontally. The forward speed is chosen by the flapping wing itself by balance of drag and thrust. We show, that by allowing the wing to passively pitch or by adding a flexible extension at its trailing edge, the forward speed is significantly increased. Detailed measurements of wing deflection and passive pitching, together with flow visualization, are used to explain our observations. The advantage of having a wing with finite rigidity/flexibility is discussed as we compare the current results with our biological inspirations such as birds and fish.

  5. con dietas suplementadas con Cromo-L-metionina

    Directory of Open Access Journals (Sweden)

    Ram\\u00F3n Garc\\u00EDa-Castillo

    2006-01-01

    Full Text Available Un total de 48 cerdos (Sus scrofa domesticus; 24 machos castrados y 24 hembras cruzados (Yorkshire, Hampshire, Duroc y Landrace de 3,5 a 4,0 meses de edad y 60,0 ± 5,0 kg PV en finalización. Se alimentaron con dietas isoproteícas (14,5 % PC e isoenergéticas (3.400 kcal EM/kg de MS, adicionadas con Cr-L-metionina (MiCroPlex® (0, 200, 400 y 600 ppb. El experimento tuvo una duración de 45 días y se realizó de agosto a noviembre del 2002 en las instalaciones de la Universidad Autónoma Agraria Antonio Narro, localizada en Saltillo, Coahuila, México. Al tener los animales aproximadamente 95 kg PV, se tomó muestra de 15 ml de sangre por cada animal para determinar la concentración de glucosa, ácido úrico, creatinina, urea, proteinas totales y colesterol. Se aplicó un diseño completamente al azar con arreglo factorial 2 x 4; dos para el factor sexo y cuatro para nivel de cromo. Los metabolitos en suero no fueron afectados (P>0,05 por el factor sexo. La glucosa en suero disminuyó (P<0,05 y el colesterol incrementó (P<0,05 con cromo en la dieta. Se concluye que el Cr incrementa el metabolismo de glucosa y disminuye el de colesterol, con lo cual puede haber energía disponible para síntesis de proteína la cual es necesaria para el crecimiento de los animales

  6. [Flexibility competencies: emotional organization management].

    Science.gov (United States)

    Caballero Muñoz, Domingo; Blanco Prieto, Antonio

    2007-11-01

    The aim of this article is to analyse the transferral of flexibility from contemporary organizations to workers. Through the approach of management by competencies, organizations try to develop in their workers behaviours that are related to efficient job performance. In order to appraise the importance of this approach, we used a critical-rational perspective to discuss the productivity demands that are characteristic of advanced industrial societies. The article shows how the link between workers' flexibility management and their emotional competencies affects their lives, which, like the organizations, should be versatile and adaptable to change.

  7. Polymer electronics a flexible technology

    CERN Document Server

    Technology, Rapra

    2009-01-01

    The worldwide market for polymer electronic products has been estimated to be worth up to £15 billion by 2015 and the opportunity for new markets could be as high as £125 billion by 2025.'The rapid development of polymer electronics has revealed the possibility for transforming the electronics market by offering lighter, flexible and more cost effective alternatives to conventional materials and products. With applications ranging from printed, flexible conductors and novel semiconductor components to intelligent labels and large area displays and solar panels, products that were previously un

  8. Development of Flexible Pneumatic Cylinder with Built-in Flexible Linear Encoder and Flexible Bending Sensor

    Science.gov (United States)

    Akagi, Tetsuya; Dohta, Shujiro; Matsushita, Hisashi; Fukuhara, Akimasa

    The purpose of this study is to develop a lightweight and intelligent soft actuator which can be safely attached to the human body. A novel flexible pneumatic cylinder that can be used even if it is deformed by external force had been proposed. The cylinder can realize both pushing and pulling motions even if the cylinder bends. In this paper, a flexible pneumatic cylinder with a built-in flexible linear encoder is proposed and tested. The encoder can detect the cylinder displacement even if the cylinder bends. In the next step, to realize an intelligent flexible cylinder, it is essential to recognize the angle of deflection of the cylinder to estimate the direction of the external force. Therefore, a flexible bending sensor that can measure the directional angle by attaching it to the end of the cylinder is also proposed and tested. The tested bending sensor also consists of four inexpensive photo-reflectors set on the circumferential surface to the cylinder tube every 90 degrees from the center of the tube. By measuring the distance between the photo reflector and the surface of the tube at each point, the bending directional angle of the cylinder can be obtained. A low cost measuring system using a micro-computer incorporating a programmed Up/Down counter to measure the displacement of the cylinder is also developed. As a result, it was confirmed that the measuring accuracy of the bending directional angle was good, less than 0.7 degrees as a standard deviation.

  9. Recubrimiento de acero con polidopamina

    OpenAIRE

    Carrasco Rodríguez, Javier

    2013-01-01

    Se ha obtenido recubrimientos de polidopamina en acero mecánicamente resistentes y con tiempos de obtención relativamente pequeños a través de la polimerización de la dopamina bajo diferentes condiciones.

  10. Taming Time with Flexible Work.

    Science.gov (United States)

    Stamps, David

    1995-01-01

    Because of increasing incidence of burnout among midlevel managers, many companies are reducing workload schedules, an arrangement that would have been unthinkable 10 years ago. Surveys have made the case that flexible work arrangements increase employee happiness and, therefore, productivity. (JOW)

  11. Flexible working motivates all staff.

    Science.gov (United States)

    2001-04-01

    A recent survey has demolished the myth that work-life balance is only of interest to women with children. The survey, commissioned by Lloyds TSB on behalf of the Employers for Work Life Balance organisation, shows that young workers and men are equally interested in flexible working arrangements that allow them to pursue interests outside of work.

  12. Distribution method optimization : inventory flexibility

    NARCIS (Netherlands)

    Asipko, D.

    2010-01-01

    This report presents the outcome of the Logistics Design Project carried out for Nike Inc. This project has two goals: create a model to measure a flexibility aspect of the inventory usage in different Nike distribution channels, and analyze opportunities of changing the decision model of splitting

  13. Flexible spintronic devices on Kapton

    DEFF Research Database (Denmark)

    Bedoya-Pinto, Amilcar; Donolato, Marco; Gobbi, Marco

    2014-01-01

    Magnetic tunnel junctions and nano-sized domain-wall conduits have been fabricated on the flexible substrate Kapton. Despite the delicate nature of tunneling barriers and zig-zag shaped nanowires, the devices show an outstanding integrity and robustness upon mechanical bending. High values of ben...

  14. Flexible Bistable Cholesteric Reflective Displays

    Science.gov (United States)

    Yang, Deng-Ke

    2006-03-01

    Cholesteric liquid crystals (ChLCs) exhibit two stable states at zero field condition-the reflecting planar state and the nonreflecting focal conic state. ChLCs are an excellent candidate for inexpensive and rugged electronic books and papers. This paper will review the display cell structure,materials and drive schemes for flexible bistable cholesteric (Ch) reflective displays.

  15. Requirements for flexible learner monitoring

    NARCIS (Netherlands)

    Glahn, Christian; Specht, Marcus; Koper, Rob

    2007-01-01

    Glahn, C., Specht, M., & Koper, R. (2007). Requirements for flexible learner monitoring. In T. Navarette, J. Blat & R. Koper (Eds.). Proceedings of the 3rd TENCompetence Open Workshop 'Current Research on IMS Learning Design and Lifelong Competence Development Infrastructures' (pp. 89-96). June,

  16. Flexible Schedules and Shift Work.

    Science.gov (United States)

    Beers, Thomas M.

    2000-01-01

    Flexible work hours have gained prominence, as more than 25 million workers (27.6% of all full-time workers) can now vary their schedules. However, there has been little change since the mid-1980s in the proportion who work a shift other than a regular daytime shift. (JOW)

  17. Easy and flexible mixture distributions

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; Mabit, Stefan L.

    2013-01-01

    We propose a method to generate flexible mixture distributions that are useful for estimating models such as the mixed logit model using simulation. The method is easy to implement, yet it can approximate essentially any mixture distribution. We test it with good results in a simulation study...

  18. Functional flexibility and team performance

    NARCIS (Netherlands)

    Molleman, E.; Slomp, J.

    1999-01-01

    This study deals with workforce flexibility defined in terms of 'multifunctionality' and 'redundancy'. These concepts refer, respectively, to the number of different tasks a worker has mastered and the number of workers that are qualified to do a specific task. A third factor to be considered is

  19. Can flexibility help you float?

    Science.gov (United States)

    Burton, L. J.; Bush, J. W. M.

    2012-10-01

    We consider the role of flexibility in the weight-bearing characteristics of bodies floating at an interface. Specifically, we develop a theoretical model for a two-dimensional thin floating plate that yields the maximum stable plate load and optimal stiffness for weight support. Plates small relative to the capillary length are primarily supported by surface tension, and their weight-bearing potential does not benefit from flexibility. Above a critical size comparable to the capillary length, flexibility assists interfacial flotation. For plates on the order of and larger than the capillary length, deflection from an initially flat shape increases the force resulting from hydrostatic pressure, allowing the plate to support a greater load. In this large plate limit, the shape that bears the most weight is a semicircle, which displaces the most fluid above the plate for a fixed plate length. Exact results for maximum weight-bearing plate shapes are compared to analytic approximations made in the limits of large and small plate sizes. The value of flexibility for floating to a number of biological organisms is discussed in light of our study.

  20. Flexible Work Schedules. ERIC Digest.

    Science.gov (United States)

    Kerka, Sandra

    Flexible work schedules are one response to changes in the composition of the work force, new life-styles, and changes in work attitudes. Types of alternative work schedules are part-time and temporary employment, job sharing, and flextime. Part-time workers are a diverse group--women, the very young, and older near-retirees. Although part-time…

  1. Light Management in Flexible OLEDs

    NARCIS (Netherlands)

    Harkema, S.; Pendyala, R.K.; Geurts, C.G.C.; Helgers, P.L.J.; Levell, J.W.; Wilson, J.S.; MacKerron, D.

    2014-01-01

    Organic light-emitting diodes (OLEDs) are a promising lighting technology. In particular OLEDs fabricated on plastic foils are believed to hold the future. These planar devices are subject to various optical losses, which requires sophisticated light management solutions. Flexible OLEDs on plastic

  2. Rationality, decision flexibility and pensions

    NARCIS (Netherlands)

    Koç, Emre

    2015-01-01

    In this thesis several different aspects of the standard economic theory (SET) are examined. One of the premises of the SET is that whether or not an agent has choice flexibility does not influence his behavior. In the first chapter of the thesis we design an experiment to test the validity of this

  3. Flexible devices: from materials, architectures to applications

    Science.gov (United States)

    Zou, Mingzhi; Ma, Yue; Yuan, Xin; Hu, Yi; Liu, Jie; Jin, Zhong

    2018-01-01

    Flexible devices, such as flexible electronic devices and flexible energy storage devices, have attracted a significant amount of attention in recent years for their potential applications in modern human lives. The development of flexible devices is moving forward rapidly, as the innovation of methods and manufacturing processes has greatly encouraged the research of flexible devices. This review focuses on advanced materials, architecture designs and abundant applications of flexible devices, and discusses the problems and challenges in current situations of flexible devices. We summarize the discovery of novel materials and the design of new architectures for improving the performance of flexible devices. Finally, we introduce the applications of flexible devices as key components in real life. Project supported by the National Key R&D Program of China (Nos. 2017YFA0208200, 2016YFB0700600, 2015CB659300), the National Natural Science Foundation of China (Nos. 21403105, 21573108), and the Fundamental Research Funds for the Central Universities (No. 020514380107).

  4. Santiago, una ciudad con temor

    Directory of Open Access Journals (Sweden)

    Enrique Oviedo S.

    1999-04-01

    Full Text Available El objetivo general de este artículo es evaluar los efectos de la inseguridad ciudadana en el uso del espacio público. Dicha evaluación exige analizar dos relaciones que se establecen en el ámbito de la violencia: la relación entre victimización y percepción de inseguridad; y la que se establece entre actitudes sociales y resolución pacífica de conflictos nacionales. Para ello, se analizaron las variables victimización, percepción de inseguridad, uso del espacio físico, actitudes hacia el sistema institucional político y social y hacia la resolución de conflictos nacionales, y las posibles relaciones entre ellas. Los datos para realizar el estudio se obtuvieron por medio de una encuesta que se llevó a cabo con 1 200 personas de 18 y 70 años de edad residentes en la ciudad de Santiago. Los resultados indican que Santiago es una ciudad de habitantes con temor y que el aumento de la percepción de inseguridad de sus habitantes contrasta con el hecho de que las tasas de victimización se hayan mantenido, más o menos, constantes en los años que precedieron a la encuesta. El temor se relaciona con el abandono del espacio público físico y sociopolítico, así como con el refugio en los espacios y la vida privados. La actitud de resolver los conflictos por medios no pacíficos es frecuente y se asocia en mayor medida con la inseguridad, la actitud negativa hacia la democracia y la falta de expectativas sobre el futuro del país. Los resultados de este estudio respaldan la idea de que para superar el temor la gente tiende a adaptarse a la realidad adoptando una postura conformista, homogeneizando las creencias y los comportamientos, y sobreestimando la fuerza como medio para resolver las diferencias.

  5. Santiago, una ciudad con temor

    Directory of Open Access Journals (Sweden)

    Oviedo S. Enrique

    1999-01-01

    Full Text Available El objetivo general de este artículo es evaluar los efectos de la inseguridad ciudadana en el uso del espacio público. Dicha evaluación exige analizar dos relaciones que se establecen en el ámbito de la violencia: la relación entre victimización y percepción de inseguridad; y la que se establece entre actitudes sociales y resolución pacífica de conflictos nacionales. Para ello, se analizaron las variables victimización, percepción de inseguridad, uso del espacio físico, actitudes hacia el sistema institucional político y social y hacia la resolución de conflictos nacionales, y las posibles relaciones entre ellas. Los datos para realizar el estudio se obtuvieron por medio de una encuesta que se llevó a cabo con 1 200 personas de 18 y 70 años de edad residentes en la ciudad de Santiago. Los resultados indican que Santiago es una ciudad de habitantes con temor y que el aumento de la percepción de inseguridad de sus habitantes contrasta con el hecho de que las tasas de victimización se hayan mantenido, más o menos, constantes en los años que precedieron a la encuesta. El temor se relaciona con el abandono del espacio público físico y sociopolítico, así como con el refugio en los espacios y la vida privados. La actitud de resolver los conflictos por medios no pacíficos es frecuente y se asocia en mayor medida con la inseguridad, la actitud negativa hacia la democracia y la falta de expectativas sobre el futuro del país. Los resultados de este estudio respaldan la idea de que para superar el temor la gente tiende a adaptarse a la realidad adoptando una postura conformista, homogeneizando las creencias y los comportamientos, y sobreestimando la fuerza como medio para resolver las diferencias.

  6. Integrated flexible capacity and inventory management under flexible capacity uncertainty

    OpenAIRE

    Paç, Mehmet Fazıl

    2006-01-01

    Cataloged from PDF version of article. In a manufacturing environment with volatile demand, inventory management can be coupled with dynamic capacity adjustments for handling the fluctuations more effectively. In this study we consider the integrated management of inventory and flexible capacity management under seasonal stochastic demand and uncertain labor supply. The capacity planning problem is investigated from the workforce planning perspective. We consider a manufactu...

  7. Flexible Learning Environments: Leveraging the Affordances of Flexible Delivery and Flexible Learning

    Science.gov (United States)

    Hill, Janette R.

    2006-01-01

    The purpose of this article is to explore the key features of "flexible learning environments" (FLEs). Key principles associated with FLEs are explained. Underlying tenets and support mechanisms necessary for the implementation of FLEs are described. Similarities and differences in traditional learning and FLEs are explored. Finally, strategies…

  8. Graphene-based materials for flexible supercapacitors.

    Science.gov (United States)

    Shao, Yuanlong; El-Kady, Maher F; Wang, Lisa J; Zhang, Qinghong; Li, Yaogang; Wang, Hongzhi; Mousavi, Mir F; Kaner, Richard B

    2015-06-07

    The demand for flexible/wearable electronic devices that have aesthetic appeal and multi-functionality has stimulated the rapid development of flexible supercapacitors with enhanced electrochemical performance and mechanical flexibility. After a brief introduction to flexible supercapacitors, we summarize current progress made with graphene-based electrodes. Two recently proposed prototypes for flexible supercapacitors, known as micro-supercapacitors and fiber-type supercapacitors, are then discussed. We also present our perspective on the development of graphene-based electrodes for flexible supercapacitors.

  9. pacientes con insuficiencia renal terminal

    Directory of Open Access Journals (Sweden)

    Karen Herrera Herrera

    2011-01-01

    Full Text Available La presente investigación fundamenta en la clínica psicoanalítica el estudio de dos casos de tres personas diagnosticadas con IRT que reciben tratamiento de hemodiálisis, en razón a que dadas las características y el aumento de los reportes que se presentan, ya esto se considera un problema de salud pública. El objetivo principal es describir las características dinámicas del proceso de duelo en pacientes con IRT en un centro de terapia renal de la ciudad de Cartagena. El procedimiento metodológico empleó un diseño de tipo cualitativo; la investigación se desarrolló con un diseño clínico mediante el estudio de casos, y fundamentada en la hermenéutica psicoanalítica. Todo esto respaldado en la historia clínica, la entrevista semiestructurada individual y familiar, los test proyectivos, test del dibujo de la figura humana Machover y TAT de Murray, para la debida integración de los análisis. Se concluye que predominan funciones fallidas de los progenitores y que son individuos provenientes de familias psicosomáticas, que utilizan la enfermedad para obtener un beneficio secundario.

  10. con bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Adriana Mora Antó

    2005-01-01

    Full Text Available Esta investigación dio cuenta de la relación entre el estilo de funcionamiento familiar, los patrones de crianza y las edades de desarrollo evolutivo en niños, nacidos con bajo peso. El estudio descriptivo correlacional se realizó con 41 niños y sus madres, aplicándose cuestionarios sobre funcionamiento familiar, prácticas de crianza y desarrollo infantil. Los resultados señalaron la existencia de un funcionamiento familiar caracterizado por una cohesión amalgamada y una adaptabilidad caótica, una disciplina complaciente, falta de control y de límites claros en la díada madre-hijo. Se trataba de familias monoparentales, donde la temprana edad de concepción, el madresolterismo y el apoyo de la familia extensa eran constantes. Las edades evolutivas registradas indicaron un desarrollo inferior a la edad cronológica, en la mayor parte de los casos; sin embargo, éstas tendieron a ser superiores al compararlas con la edades reales de los infantes. No se encontró una correlación estadísticamente significativa entre la edad de desarrollo y los diferentes factores del funcionamiento familiar para algunos de los rangos de edad considerados; sin embargo, no se lo descartó por completo, especialmente en lo referente al optimismo familiar

  11. Two-dimensional flexible nanoelectronics

    Science.gov (United States)

    Akinwande, Deji; Petrone, Nicholas; Hone, James

    2014-12-01

    2014/2015 represents the tenth anniversary of modern graphene research. Over this decade, graphene has proven to be attractive for thin-film transistors owing to its remarkable electronic, optical, mechanical and thermal properties. Even its major drawback--zero bandgap--has resulted in something positive: a resurgence of interest in two-dimensional semiconductors, such as dichalcogenides and buckled nanomaterials with sizeable bandgaps. With the discovery of hexagonal boron nitride as an ideal dielectric, the materials are now in place to advance integrated flexible nanoelectronics, which uniquely take advantage of the unmatched portfolio of properties of two-dimensional crystals, beyond the capability of conventional thin films for ubiquitous flexible systems.

  12. Flexible Temperature Sensors on Fibers

    Directory of Open Access Journals (Sweden)

    Marcin Sloma

    2010-08-01

    Full Text Available The aim of this paper is to present research dedicated to the elaboration of novel, miniaturized flexible temperature sensors for textronic applications. Examined sensors were manufactured on a single yarn, which ensures their high flexibility and good compatibility with textiles. Stable and linear characteristics were obtained by special technological process and applied temperature profiles. As a thermo-sensitive materials the innovative polymer compositions filled with multiwalled carbon nanotubes were used. Elaborated material was adapted to printing and dip-coating techniques to produce NTC composites. Nanotube sensors were free from tensometric effect typical for other carbon-polymer sensor, and demonstrated TCR of 0.13%/K. Obtained temperature sensors, compatible with textile structure, can be applied in rapidly developing smart textiles and be used for health and protections purposes.

  13. Lost and Found in Flexibility

    DEFF Research Database (Denmark)

    Bødker, Susanne; Christiansen, Ellen

    2002-01-01

    'New work' is characterized by mobility and flexibility and a growing need to facilitate social awareness. The paper discusses how to augment the environment with social awareness and suggest 'awareness-in-transition' as a lable for awareness in mobile work in flexible work environments......, and as locus for building social awareness in the 'new work'. A transition (e.g. taking information from a whiteboard in a meeting room to the desktop of a personal computer)--besides the immediate implications at the functional level--has important interpersonal, intra-personal, and organizational...... implications for the building of a social awareness among the collaborators, because it builds on recognition of difference in the environment. Building on Grudin's 'Eight Challenges for the Developers' of Computer Supported Cooperative Work, through analysis of a scenario and two experiments based on case...

  14. Flexible Adaptation in Cognitive Radios

    CERN Document Server

    Li, Shujun

    2013-01-01

    This book provides an introduction to software-defined radio and cognitive radio, along with methodologies for applying knowledge representation, semantic web, logic reasoning and artificial intelligence to cognitive radio, enabling autonomous adaptation and flexible signaling. Readers from the wireless communications and software-defined radio communities will use this book as a reference to extend software-defined radio to cognitive radio, using the semantic technology described. Readers with a background in semantic web and artificial intelligence will find in this book the application of semantic web and artificial intelligence technologies to wireless communications. For readers in networks and network management, this book presents a new approach to enable interoperability, collaborative optimization and flexible adaptation of network components. Provides a comprehensive ontology covering the core concepts of wireless communications using a formal language; Presents the technical realization of using a ...

  15. Inflation persistence and flexible prices

    OpenAIRE

    Robert Dittmar; William T. Gavin; Finn E. Kydland

    2004-01-01

    If the central bank follows an interest rate rule, then inflation is likely to be persistence, even when prices are fully flexible. Any shock, whether persistent or not, may lead to inflation persistence. In equilibrium, the dynamics of inflation are determined by the evolution of the spread between the real interest rate and the central bank’s target. Inflation persistence in U.S. data can be characterized by a vector autocorrelation function relating inflation and deviations of output from ...

  16. Creating a flexible learning environment.

    Science.gov (United States)

    Taylor, B A; Jones, S; Winters, P

    1990-01-01

    Lack of classroom space is a common problem for many hospital-based nurse educators. This article describes how nursing educators in one institution redesigned fixed classroom space into a flexible learning center that accommodates their various programs. Using the nursing process, the educators assessed their needs, planned the learning environment, implemented changes in the interior design, and evaluated the outcome of the project. The result was a learning environment conducive to teaching and learning.

  17. On Integrity of Flexible Displays

    Science.gov (United States)

    Bouten, Piet C. P.

    Nowadays two display types are dominant in the display market: the bulky cathode ray tube (CRT) and liquid crystal displays (LCD). Both types use glass as substrate material. The LCD display is the dominant player for mobile applications, in for instance mobile phones and portable computers. In the development of displays and their applications a clear interest exists to replace the rigid rectangular display cells by free-shaped, curved or even roll-up cells. These types of applications require flexible displays.

  18. Value of Flexibility - Phase 1

    Science.gov (United States)

    2010-09-25

    010-1 9/25/10 UNCLASSIFIED 99  ― Nike shoes provide flexibility to the customer in terms of color choice, customized emblems (such as college...opportunity, he constructs a synthetic portfolio of a brand -new factory in a developing country, such as China, and bonds. Maybe the monetary values of both...1990s the DoD developed a new guidance kit using a combination of Inertial Navigation (INS) and the satellite based Global Positioning System (GPS

  19. [Flexibility and safety in hospitals].

    Science.gov (United States)

    Fara, G M; Barni, M

    2011-01-01

    The paper explains the reasons according to which the newly-planned hospitals must adopt the concept of advanced flexibility (structural, technological, organizational, diagnostic and therapeutic), in order to avoid the risk of being already obsolete at the moment of their opening, and this due to the fact that too much time elapses in this Country between the moment of planning a new hospital and the moment of the start of its activity. Flexibility is needed at different levels: at low or medium levels for what concerns administrative spaces and also patient rooms (except, in this latter case, when differential intensity of care is adopted); at advanced levelfor what concerns diagnostic and therapeutic areas, which must be rapidly adaptable to new solutions offered by advances in technology and organization. From a different standpoint, flexibility applies also to the fact that hospital must increasingly become a node of a large net including territorial health services: the latter devoted to take care of chronicity, while hospitals should concentrate on acute pathology. Of course the territory surrounding the hospital, through its outpatient service and consultories, is in charge also for first level diagnosy and therapy, leaving the hospital to more sophisticated activities.

  20. The Flexibility of Ectopic Lipids

    Directory of Open Access Journals (Sweden)

    Hannah Loher

    2016-09-01

    Full Text Available In addition to the subcutaneous and the visceral fat tissue, lipids can also be stored in non-adipose tissue such as in hepatocytes (intrahepatocellular lipids; IHCL, skeletal (intramyocellular lipids; IMCL or cardiac muscle cells (intracardiomyocellular lipids; ICCL. Ectopic lipids are flexible fuel stores that can be depleted by physical exercise and repleted by diet. They are related to obesity and insulin resistance. Quantification of IMCL was initially performed invasively, using muscle biopsies with biochemical and/or histological analysis. 1H-magnetic resonance spectroscopy (1H-MRS is now a validated method that allows for not only quantifying IMCL non-invasively and repeatedly, but also assessing IHCL and ICCL. This review summarizes the current available knowledge on the flexibility of ectopic lipids. The available evidence suggests a complex interplay between quantitative and qualitative diet, fat availability (fat mass, insulin action, and physical exercise, all important factors that influence the flexibility of ectopic lipids. Furthermore, the time frame of the intervention on these parameters (short-term vs. long-term appears to be critical. Consequently, standardization of physical activity and diet are critical when assessing ectopic lipids in predefined clinical situations.

  1. Flexible eddy current coil arrays

    International Nuclear Information System (INIS)

    Krampfner, Y.; Johnson, D.P.

    1987-01-01

    A novel approach was devised to overcome certain limitations of conventional eddy current testing. The typical single-element hand-wound probe was replaced with a two dimensional array of spirally wound probe elements deposited on a thin, flexible polyimide substrate. This provides full and reliable coverage of the test area and eliminates the need for scanning. The flexible substrate construction of the array allows the probes to conform to irregular part geometries, such as turbine blades and tubing, thereby eliminating the need for specialized probes for each geometry. Additionally, the batch manufacturing process of the array can yield highly uniform and reproducible coil geometries. The array is driven by a portable computer-based eddy current instrument, smartEDDY/sup TM/, capable of two-frequency operation, and offers a great deal of versatility and flexibility due to its software-based architecture. The array is coupled to the instrument via an 80-switch multiplexer that can be configured to address up to 1600 probes. The individual array elements may be addressed in any desired sequence, as defined by the software

  2. WAGE FLEXIBILITY IN THE CONTEMPORARY SOCIETY

    Directory of Open Access Journals (Sweden)

    TECULESCU Silviu Alexandru

    2010-12-01

    Full Text Available The paper follows to offer the most efficient solutions for the attainment by Romania of the economic development level associated to the Western European countries. It proposes the division of the flexibility of labour market in three components, namely: internal flexibility, external flexibility and wage flexibility. The analysis performed within the present study will emphasize the wage flexibility. Wage flexibility can be classified in four components: a plans of individual and group incentives; b plans of assigning wages out of productivity; c plans of distribution of profits and, respectively, d plans of suggestions. The labour market flexibility, in general, and especially the wage flexibility contributes to the increase of employee motivation at the workplace, aspect which leeds to the growth of labour productivity, through this one being put the bases of the medium- and long-term economic development.

  3. Challenges in navigational strategies for flexible endoscopy

    NARCIS (Netherlands)

    van der Stap, N.; van der Heijden, Ferdinand; Broeders, Ivo Adriaan Maria Johannes

    Automating flexible endoscope navigation could lead to an increase in patient safety for endoluminal therapeutic procedures. Additionally, it may decrease the costs of diagnostic flexible endoscope procedures by shortening the learning curve and increasing the efficiency of insertion. Earlier

  4. Soldier Flexible Personal Digital Assistant Program

    National Research Council Canada - National Science Library

    Price, Mark; Woytowich, Jason; Carlson, Marc

    2008-01-01

    The main goal of the Soldier Flexible Personal Digital Assistant Program was to develop prototypes of a novel flexible display technology device for demonstration in a laboratory setting and use in Future Force Warrior (FFW) demonstrations...

  5. Movable MEMS Devices on Flexible Silicon

    KAUST Repository

    Ahmed, Sally

    2013-01-01

    Flexible electronics have gained great attention recently. Applications such as flexible displays, artificial skin and health monitoring devices are a few examples of this technology. Looking closely at the components of these devices, although MEMS

  6. Understanding flexible and distributed software development processes

    OpenAIRE

    Agerfalk, Par J.; Fitzgerald, Brian

    2006-01-01

    peer-reviewed The minitrack on Flexible and Distributed Software Development Processes addresses two important and partially intertwined current themes in software development: process flexibility and globally distributed software development

  7. UNITY OF THE ORGANIZATIONAL FUNCTIONS FLEXIBILITY

    OpenAIRE

    George MOLDOVEANU; Cosmin DOBRIN

    2012-01-01

    The paper has the goal to analyse the correlation of the flexibility of all organizational functions. Based upon theoretical and practical studies, the decrease of flexibility into an "activity area" of organizations implies a diminution on a large scale of the flexibility of the processing system as a law expression of the decreasing outputs within economy. Therefore, at the level of each organizational function there are several major directions ensuring the flexibility of the "ensemble".

  8. Endogenous price flexibility and optimal monetary policy

    OpenAIRE

    Ozge Senay; Alan Sutherland

    2014-01-01

    Much of the literature on optimal monetary policy uses models in which the degree of nominal price flexibility is exogenous. There are, however, good reasons to suppose that the degree of price flexibility adjusts endogenously to changes in monetary conditions. This article extends the standard new Keynesian model to incorporate an endogenous degree of price flexibility. The model shows that endogenizing the degree of price flexibility tends to shift optimal monetary policy towards complete i...

  9. Flexible learning and the design of instruction

    NARCIS (Netherlands)

    Collis, Betty; Nikolova, Iliana

    1998-01-01

    The paper deals with the problem of designing flexible learning and instruction. Flexibility is considered both from the learner's and the designer's perspective. The potential of telematics in the design, development and implementation of flexible and distance learning is discussed. A Method for

  10. Education, Training and the Flexible Labour Market.

    Science.gov (United States)

    Merson, Martin

    1996-01-01

    The British government's policy of flexible labor market may be interpreted as either flexibility of conditions, which encourages temporary, contingent work, or flexibility of skills, a repertoire that enables workers to undertake a range of tasks as needed. The challenge for educators is to help workers understand and engage in an uncertain world…

  11. Business Models for Power System Flexibility

    DEFF Research Database (Denmark)

    Boscan, Luis; Poudineh, Rahmatallah

    2016-01-01

    As intermittent, renewable resources gain more share in the generation mix, the need for power system flexibility increases more than ever. Parallel to this, technological change and the emergence of new players bringing about innovative solutions are boosting the development of flexibility...... business models will play an important role in ensuring sufficiency and efficiency of flexibility services....

  12. Flexible Work Options within the Organisational System

    Science.gov (United States)

    Albion, Majella J.; Chee, Munli

    2006-01-01

    The availability of flexible work options provides an opportunity for individuals to shape their careers in order to optimise their work and life goals. This study takes a systems theory approach to examine how the use of flexible work options influences relationships and interactions in the workplace. The "Flexible Work Options…

  13. Cellulose Nanofiber Composite Substrates for Flexible Electronics

    Science.gov (United States)

    Ronald Sabo; Jung-Hun Seo; Zhenqiang Ma

    2012-01-01

    Flexible electronics have a large number of potential applications including malleable displays and wearable computers. The current research into high-speed, flexible electronic substrates employs the use of plastics for the flexible substrate, but these plastics typically have drawbacks, such as high thermal expansion coefficients. Transparent films made from...

  14. Conversando con...Momoyo Kaijima

    OpenAIRE

    Gómez Alonso, Carlos; Álvarez Isidro, Eva; Torres Barchino, Ana

    2017-01-01

    [ES] Momoyo Kaijima es profesora en la Facultad de Arte y Diseño de la Universidad de Tsukuba en la Prefectura de Ibaraki y profesora visitante en la ETH de Zürich, en Royal Academy of Fine Arts, en Rice School of Architecture y en Harvard GSD. A lo largo de los años, Atelier Bow Wow ha colaborado con Krešimir Rogina, arquitecto de Zagreb y socio de la firma internacional Penezic&Rogina, en la realización del Grožnjan International Summer School of Architecture, siendo Rogina el nexo indispen...

  15. Consumer Central Energy Flexibility in Office Buildings

    DEFF Research Database (Denmark)

    Billanes, Joy Dalmacio; Ma, Zheng; Jørgensen, Bo Nørregaard

    2017-01-01

    Energy flexibility in buildings will play an important role in the smart energy system. Office buildings have more potentials to provide energy flexibility to the grid compared to other types of buildings, due to the existing building management, control systems and large energy consumption....... Consumers in office buildings (building owners/managers and occupants) take a main role for adopting and engaging in building energy flexibility. In this paper provides a systematic review of consumer central energy flexibility in office buildings with the discussion of social, technical and business...... can boost energy flexibility in the office buildings....

  16. Consumer flexibility - State and challenges

    International Nuclear Information System (INIS)

    Grande, Ove S.; Saele, Hanne; Morch, Andrei Z.

    2002-02-01

    This report summarises experiences and results from relevant projects carried out within the area of consumer flexibility in the last years. A general description of the projects is presented. In addition are testing activities, economical signals for motivating the end user for load reductions and appropriate technology for communication and effect management mentioned separately. Briefly summarised is the following achieved: 1) The potential for effect regulating measures in ordinary consumption and in power demanding industry is analysed and estimated to 1750 MW and 3360 MW respectively. 2) Time varied rates are developed and are tested. The NVE has decided on this basis that all the network owners should offer season varied rates to their customers. 3) Test projects in Drammen, Oslo and Trondheim have shown that it is possible to motivate smaller consumers for and implement load reductions. 4) Technology for load management for the end user is evaluated. 5) A survey is made viewing the technology for two way communication. In addition the ''option'' market for the reserves of the Statnett has proved that a steady compensation is a sufficient incentive for producing substantial effect reserves in the load sector (power intensive industry). In the last part of the report the incentives and frame conditions for establishing technical solutions and infrastructure are discussed. Further work will focus on the consumer flexibility in shortage situations. The main challenges are connected to: 1) Establishing a foundation for decisions concerning cost efficient investments in necessary technical equipment. 2) To find an optimal combination of a price flexible and remote controlled load reduction

  17. Functional flexible and wearable supercapacitors

    International Nuclear Information System (INIS)

    Huang, Yan; Zhi, Chunyi

    2017-01-01

    Substantial effort has been devoted to endowing flexible and wearable supercapacitors with desirable functions and solving urgent concerns regarding their practical application, particularly materials selection, air permeability, self-healability, shape memory, integration, and modularization. This gives rise to challenges with regard to both suitable materials and device fabrication. This review highlights the current state-of-the-art of these supercapacitors pertinent to materials, fabrication strategies, and performance. Challenges and solutions are also discussed to further improve their practicality. The aim of this review is to make a timely summary of this emerging field and discuss future opportunities and challenges. (topical review)

  18. Functional flexible and wearable supercapacitors

    Science.gov (United States)

    Huang, Yan; Zhi, Chunyi

    2017-07-01

    Substantial effort has been devoted to endowing flexible and wearable supercapacitors with desirable functions and solving urgent concerns regarding their practical application, particularly materials selection, air permeability, self-healability, shape memory, integration, and modularization. This gives rise to challenges with regard to both suitable materials and device fabrication. This review highlights the current state-of-the-art of these supercapacitors pertinent to materials, fabrication strategies, and performance. Challenges and solutions are also discussed to further improve their practicality. The aim of this review is to make a timely summary of this emerging field and discuss future opportunities and challenges.

  19. Lifelong Open and Flexible Learning

    DEFF Research Database (Denmark)

    Bang, Jørgen

    2006-01-01

    and Flexible (LOF) learning embracing characteristics as: open learning, distance learning, e-learning, online learning, open accessibility, multimedia support, virtual mobility, learning communities, dual mode (earn & learn) approaches, and the like.In my presentation I will focus on the EADTU strategies...... for creating a synergy network in e-learning – eventually leading to a European Learning Space that supports virtual mobility of students, staff and courses, adds an e-dimension to the Bologa process and facilitates collaboration between universities and the corporate sector....

  20. Flexible Imputation of Missing Data

    CERN Document Server

    van Buuren, Stef

    2012-01-01

    Missing data form a problem in every scientific discipline, yet the techniques required to handle them are complicated and often lacking. One of the great ideas in statistical science--multiple imputation--fills gaps in the data with plausible values, the uncertainty of which is coded in the data itself. It also solves other problems, many of which are missing data problems in disguise. Flexible Imputation of Missing Data is supported by many examples using real data taken from the author's vast experience of collaborative research, and presents a practical guide for handling missing data unde

  1. Novel Flexible Artificial Magnetic Conductor

    Directory of Open Access Journals (Sweden)

    M. E. de Cos

    2012-01-01

    Full Text Available A novel flexible uniplanar AMC design is presented. An AMC prototype is manufactured using laser micromachining and it is characterized under flat and bent conditions by measuring its reflection coefficient phase in an anechoic chamber. The designed prototype shows broad AMC operation bandwidth (6.96% and higher and polarization angle independency. Its angular stability margin, when operating under oblique incidence, is also tested obtaining ±8° as limit for a 14.4 cm × 14.4 cm prototype.

  2. LEARNING ON FLEXIBILITY FROM EXPERIENCES

    DEFF Research Database (Denmark)

    Olsen, Ib Steen; Bonke, Sten

    2011-01-01

    aiming at stimulating the development of new building designs with an improved technological adaptability to new demands and flexibility. The data input to this review is extracted from 15 residential areas with a total of about 1000-1200 apartments which were built in the 1980s after a competition which...... storey housing with cross bearing walls. Within multi storey housing the developed system design appeared to be less adaptable to later alterations. Therefore The Danish Ministry of Housing and Building in 1983 issued an initiative to stimulate technology development of residential non profit housing...

  3. Flexible experimental FPGA based platform

    DEFF Research Database (Denmark)

    Andersen, Karsten Holm; Nymand, Morten

    2016-01-01

    This paper presents an experimental flexible Field Programmable Gate Array (FPGA) based platform for testing and verifying digital controlled dc-dc converters. The platform supports different types of control strategies, dc-dc converter topologies and switching frequencies. The controller platform...... interface supporting configuration and reading of setup parameters, controller status and the acquisition memory in a simple way. The FPGA based platform, provides an easy way within education or research to use different digital control strategies and different converter topologies controlled by an FPGA...

  4. Flexibility in radiation protection legislation

    International Nuclear Information System (INIS)

    Beaver, P.F.; Gill, J.R.

    1980-01-01

    The UK approach to radiation protection legislation is described in detail. The advantages are outlined of a flexible approach whereby the objectives of the legislation are clearly identified but the means of achieving these are left open or qualified by terms such as 'where reasonably practicable'. The roles and viewpoints of management and unions in such an approach are discussed especially with respect to legislation such as the Health and Safety at Work Act. Specific topics include requirements for notification of use, criteria for controlled areas and the tasks of the radiation protection adviser. (UK)

  5. Energy Flexibility in the Power System

    DEFF Research Database (Denmark)

    Billanes, Joy Dalmacio; Ma, Zheng; Jørgensen, Bo Nørregaard

    2017-01-01

    Energy flexibility can address the challenges of large scale integration of renewable energy resources and thereby increasing imbalance in the power system. Flexible power system can provide reliable supply, low electricity cost and sustainability. Various situations and factors influence...... the adoption of the flexibility solutions, such as flexible electricity generation, demand-response, and electricity storage. This paper tries to analyze the current energy flexibility solutions and the factors that can influence the energy flexibility adoption. This paper takes Philippines as case study...... to provide an overview of the current condition of the Philippines’ power system and discuss the energy flexibility in the Philippines’ power system. A further discussion and recommendation is conducted in the end of the paper....

  6. Food irradiation - pros and cons

    International Nuclear Information System (INIS)

    1983-01-01

    The use of ionising radiation for food preservation is a much-disputed topic, both among experts and among consumers. Pros and cons of this issue were discussed in detail at the consumers' forum. Professor Dr. Johannes Friedrich Diehl, Director of the Institute for Biochemistry of the Food Research Centre, Karlsruhe, is a well-known supporter of the new method of food preservation; he sees advantages in the radiopreservation of food because, for example, losses due to inedibility are reduced, the danger of salmonellosis is decreased, just as the use of chemicals. He thinks this method to be without danger to health, shown by many years of experience. Opponents to food irradiation like Prof. Dr. Konrad Pfeilsticker, Professor for food science and food chemistry at the Bonn University deem the method to be unnecessary and raise the problem of qualitative changes caused in the food. In the course of the discussions, the pros and cons seemed to balance each other out. (orig./AJ) [de

  7. De paseo con los Bourbaki

    Directory of Open Access Journals (Sweden)

    Miquel Escudero

    2012-04-01

    Full Text Available Setenta y siete años después de la fundación del grupo Bourbaki, procedemos a una reflexión que puede ser útil para los estudiantes que acaso no sepan de su existencia, ni tan siquiera los de matemáticas. Sería interesante conocer que a este grupo se le debe el signo del vacío como conjunto. Con todo lo discutible que sea el método Bourbaki en su reinterpretación de la matemática, no cabe duda de su importante repercusión hasta el punto de que ha marcado una época. Hay un antes y un después tras su irrupción, ningún matemático de primera fila de la segunda mitad del siglo XX fue ajeno a su influjo, para encabezarlo o para reprobarlo. Comenzaron como una juvenil extravagancia, pero repleta de conocimientos y con decidida voluntad de aprehender el rigor de forma exhaustiva.

  8. Tratamiento del paciente con artrosis

    Directory of Open Access Journals (Sweden)

    Francisco Vargas Negrín

    2014-01-01

    Full Text Available El manejo terapéutico del paciente con artrosis tiene como objetivo disminuir la sintomatología dolorosa e inflamatoria, mejorar la capacidad funcional del paciente y la aplicación de intervenciones terapéuticas eficaces y lo más seguras posibles. Un enfoque centrado en el paciente implica su participación activa en el diseño del plan terapéutico y en la toma de decisiones informadas oportunas en todas las etapas de la enfermedad. La educación terapéutica, la actividad física y el ejercicio terapéutico junto con el control de peso, en caso de sobrepeso u obesidad, constituyen el núcleo central del tratamiento. Los autocuidados individuales y por los familiares son fundamentales en el control del día a día del paciente. El uso de terapias físicas, ayudas técnicas (bastón, etc. y de fármacos tipo analgésicos simples, opioides y antiinflamatorios tiene evidencias demostradas en el control del dolor, mejora la funcionalidad y la calidad de vida del paciente y una clara recomendación de uso en el tratamiento de la artrosis. La cirugía conservadora y la de reemplazo articular se indican en los casos en los que no se logran los objetivos terapéuticos en casos concretos.

  9. The influence of flexible branches in flexible polymers

    International Nuclear Information System (INIS)

    Wescott, J.T.

    1998-06-01

    In this work the influence of branches in flexible polymer systems has been investigated by consideration of (1) the behaviour of isolated poly-α-olefin chains and (2) the p -T phase behaviour of poly(4-methylpentene-1)(P4MP1). Molecular dynamics simulations of isolated poly-α-olefins were performed in order to gauge directly the effect of molecular structure on chain dimensions, flexibility (via the persistence length) and shape. Under Θ-conditions the addition of short linear branches was shown to increase the flexibility of the backbone. In conditions of good solvent, however, the effect of longer and bulkier branches was to increase the persistence length and average size of the coil with the arrangement of side chain atoms making a small difference. The side branches themselves also affected the solvent conditions experienced by the backbone, behaving much like bound solvent. Consideration of ethylene-α-olefin copolymers, where the branch content was varied from 0-50%, showed that under good solvent conditions the branches increased the chain stiffness only when the gap between side branches was less than five backbone carbon atoms. The backbone torsions were also shown to play an important role in determining these trends. For comparison with the above simulations, persistence length values for polyethylene (= 7.3±0.2A) and P4MP1 (=7.6±0.3A) were measured experimentally by neutron scattering in dilute solution. A value of 6.7±0.5 for the characteristic ratio of PE was also calculated. To investigate the role of a bulky side group in crystalline phases, wide angle X-ray diffraction experiments using a Hikosaka pressure cell were performed on P4MP1. Computer modelling, utilising the experimental data obtained, determined the structure of a disordered phase produced at room temperature and a new high pressure/high temperature phase. The disordered phase was found to be due to a collapse of the backbone combined with some disordering of the side chains

  10. Flexible climate agreements after 2012

    International Nuclear Information System (INIS)

    Vevatne, Jonas

    2004-01-01

    The Kyoto agreement is only a small step towards much stronger and broader commitments and new creativity is needed to further develop a really global climate policy. A flexible approach is necessary to obtain broad participation and substantial reduction of the emissions of greenhouse gases. Flexibility is also important to ease negotiations, to ensure cost-effectiveness and implement a global climate agreement. The US withdrawal from the Kyoto Protocol has rendered the agreement much less effective than the original goal of five per cent reduction of the emission from the industrialized countries. In addition the emissions are increasing much faster in countries that have not committed themselves to the agreement. The agreement runs out in 2012 and should be followed by a new agreement, the negotiations about which are to start up no later than 2005. Attempts by the European Union to begin a discussion about future commitments were very quickly wrecked by the G77 group with strong support from the U.S.A. To formulate a practical climate policy the general goal in the Climate Convention must be interpreted and specified. It may seem impossible to agree upon a long-term goal. But the clarity it provides will be very useful. It will be a guide for short-term goals and a reference for evaluation of success

  11. Flat flexible polymer heat pipes

    International Nuclear Information System (INIS)

    Oshman, Christopher; Li, Qian; Liew, Li-Anne; Yang, Ronggui; Bright, Victor M; Lee, Y C

    2013-01-01

    Flat, flexible, lightweight, polymer heat pipes (FPHP) were fabricated. The overall geometry of the heat pipe was 130 mm × 70 mm × 1.31 mm. A commercially available low-cost film composed of laminated sheets of low-density polyethylene terephthalate, aluminum and polyethylene layers was used as the casing. A triple-layer sintered copper woven mesh served as a liquid wicking structure, and water was the working fluid. A coarse nylon woven mesh provided space for vapor transport and mechanical rigidity. Thermal power ranging from 5 to 30 W was supplied to the evaporator while the device was flexed at 0°, 45° and 90°. The thermal resistance of the FPHP ranged from 1.2 to 3.0 K W −1 depending on the operating conditions while the thermal resistance for a similar-sized solid copper reference was a constant at 4.6 K W −1 . With 25 W power input, the thermal resistance of the liquid–vapor core of the FPHP was 23% of a copper reference sample with identical laminated polymer material. This work shows a promising combination of technologies that has the potential to usher in a new generation of highly flexible, lightweight, low-cost, high-performance thermal management solutions. (paper)

  12. Superhydrophobicity enhancement through substrate flexibility

    Science.gov (United States)

    Vasileiou, Thomas; Gerber, Julia; Prautzsch, Jana; Schutzius, Thomas; Poulikakos, Dimos

    2017-11-01

    Inspired by manifestations in nature, micro/nanoengineering superhydrophobic surfaces has been the focus of much work. Generally, hydrophobicity is increased through the combined effects of surface texturing and chemistry; being durable, rigid substrate materials are the norm. However, many natural and technical materials are flexible, and the resulting effect on hydrophobicity has been largely unexplored. Here, we show that the rational tuning of flexibility can work collaboratively with the surface micro/nanotexture to enhance liquid repellency performance, defined by impalement and breakup resistance, contact time reduction, and restitution coefficient increase. Reduction in substrate stiffness and areal density imparts immediate acceleration and intrinsic responsiveness to impacting droplets, mitigating the collision and lowering the impalement probability by 60 % without the need for active actuation. We demonstrate the above discoveries with materials ranging from thin steel or polymer sheets to butterfly wings. Partial support of the Swiss National Science Foundation under Grant 162565 and the European Research Council under Advanced Grant 669908 (INTICE) is acknowledged.

  13. Flexible thin film magnetoimpedance sensors

    International Nuclear Information System (INIS)

    Kurlyandskaya, G.V.; Fernández, E.; Svalov, A.; Burgoa Beitia, A.; García-Arribas, A.; Larrañaga, A.

    2016-01-01

    Magnetically soft thin film deposited onto polymer substrates is an attractive option for flexible electronics including magnetoimpedance (MI) applications. MI FeNi/Ti based thin film sensitive elements were designed and prepared using the sputtering technique by deposition onto rigid and flexible substrates at different deposition rates. Their structure, magnetic properties and MI were comparatively analyzed. The main structural features were sufficiently accurately reproduced in the case of deposition onto cyclo olefine polymer substrates compared to glass substrates for the same conditions. Although for the best condition (28 nm/min rate) of the deposition onto polymer a significant reduction of the MI field sensitivity was found satisfactory for sensor applications sensitivity: 45%/Oe was obtained for a frequency of 60 MHz. - Highlights: • [FeNi/Ti] 3 /Cu/[FeNi/Ti] 3 films were prepared by sputtering at different deposition rates. • Polymer substrates insure sufficiently accurate reproducibility of the film structure. • High deposition rate of 28 nm/min insures the highest values of the magnetoimpedance sensitivity. • Deposition onto polymer results in the satisfactory magnetoimpedance sensitivity of 45%/Oe.

  14. Flexible thin film magnetoimpedance sensors

    Energy Technology Data Exchange (ETDEWEB)

    Kurlyandskaya, G.V., E-mail: galina@we.lc.ehu.es [Universidad del País Vasco, UPV/EHU, Departamento de Electricidad y Electrónica, P.O. Box 644, Bilbao 48080 (Spain); Ural Federal University, Laboratory of Magnetic sensoric, Lenin Ave. 51, 620083 Ekaterinburg (Russian Federation); Fernández, E. [BCMaterials UPV-EHU, Vizcaya Science and Technology Park, 48160 Derio (Spain); Svalov, A. [Universidad del País Vasco, UPV/EHU, Departamento de Electricidad y Electrónica, P.O. Box 644, Bilbao 48080 (Spain); Ural Federal University, Laboratory of Magnetic sensoric, Lenin Ave. 51, 620083 Ekaterinburg (Russian Federation); Burgoa Beitia, A. [Universidad del País Vasco, UPV/EHU, Departamento de Electricidad y Electrónica, P.O. Box 644, Bilbao 48080 (Spain); García-Arribas, A. [Universidad del País Vasco, UPV/EHU, Departamento de Electricidad y Electrónica, P.O. Box 644, Bilbao 48080 (Spain); BCMaterials UPV-EHU, Vizcaya Science and Technology Park, 48160 Derio (Spain); Larrañaga, A. [SGIker, Servicios Generales de Investigación, Universidad del País Vasco (UPV/EHU), 48080 Bilbao (Spain)

    2016-10-01

    Magnetically soft thin film deposited onto polymer substrates is an attractive option for flexible electronics including magnetoimpedance (MI) applications. MI FeNi/Ti based thin film sensitive elements were designed and prepared using the sputtering technique by deposition onto rigid and flexible substrates at different deposition rates. Their structure, magnetic properties and MI were comparatively analyzed. The main structural features were sufficiently accurately reproduced in the case of deposition onto cyclo olefine polymer substrates compared to glass substrates for the same conditions. Although for the best condition (28 nm/min rate) of the deposition onto polymer a significant reduction of the MI field sensitivity was found satisfactory for sensor applications sensitivity: 45%/Oe was obtained for a frequency of 60 MHz. - Highlights: • [FeNi/Ti]{sub 3}/Cu/[FeNi/Ti]{sub 3} films were prepared by sputtering at different deposition rates. • Polymer substrates insure sufficiently accurate reproducibility of the film structure. • High deposition rate of 28 nm/min insures the highest values of the magnetoimpedance sensitivity. • Deposition onto polymer results in the satisfactory magnetoimpedance sensitivity of 45%/Oe.

  15. Light management in flexible OLEDs

    Science.gov (United States)

    Harkema, Stephan; Pendyala, Raghu K.; Geurts, Christian G. C.; Helgers, Paul L. J.; Levell, Jack W.; Wilson, Joanne S.; MacKerron, Duncan

    2014-10-01

    Organic light-emitting diodes (OLEDs) are a promising lighting technology. In particular OLEDs fabricated on plastic foils are believed to hold the future. These planar devices are subject to various optical losses, which requires sophisticated light management solutions. Flexible OLEDs on plastic substrates are as prone to losses related to wave guiding as devices on glass. However, we determined that OLEDs on plastic substrates are susceptible to another loss mode due to wave guiding in the thin film barrier. With modeling of white polymer OLEDs fabricated on PEN substrates, we demonstrate that this loss mode is particularly sensitive to polarized light emission. Furthermore, we investigated how thin film barrier approaches can be combined with high index light extraction layers. Our analysis shows that OLEDs with a thin film barrier consisting of an inorganic/organic/inorganic layer sequence, a low index inorganic negatively affects the OLED efficiency. We conclude that high index inorganics are more suitable for usage in high efficiency flexible OLEDs.

  16. Cons ICARUS, TIGER and Fascism

    Directory of Open Access Journals (Sweden)

    Janez Vrečko

    2010-12-01

    Full Text Available Like the scientists of their time, Russian artists in the 1920s considered gravity the central problem – a view which points to the close harmony between modern physics and the avant-garde. It was only with the constructivist movement that the Icarus revolution grasped the principles of the “mobile philosophy” (3.651 which was almost at the same time recognised by modern physics as well. The static view of the world became obsolete, space and time were no longer absolute values. It was necessary to transcend Euclidean geometry, shake off the political ʻshackles on one’s hands’ and surrender to Lisicki’s imaginary space, where “At 2000 metres in the air / there is no more perspective” (Integrals 276.  Kosovel’s Icarus project accorded with Tatlin’s, and both of them accorded with the quintessential aims of the constructivist movement. It is no accident that Kosovel wished to name one of his poetry collections The Dream of Icarus. Poems on the Icarus theme, such as “Cons Icarus”, “Evacuation of the Spirit”, “Eh, Hey”, “A Heart in Alcohol” etc. belong to the group of Kosovel’s conses which follow his “mobile philosophy” (3.650 and “letters growing into space” (Int. 282.  The question “Man, do you want up in the air?” (Int. 128 will remain a question until the moment when man is finally ready to transcend the existing boundary and dive “beyond”. Hence Kosovel’s clear-cut contrast between the “green windows of an illuminated / express on a viaduct”, which moves horizontally and is, like a water current, subject to the earth’s gravity, and “the spirit in space”, whose direction of motion is “the perpendicular of the spirit”, atectonicity. “The spirit burns in space”: fire is an element that knows vertical movement alone, the only one of the elements to outgrow and transcend the earth’s gravity, therefore it is associated with another mythological figure important for

  17. On the concept of flexibility: A dual control perspective

    NARCIS (Netherlands)

    A.C.J. de Leeuw (A. C J); H.W. Volberda (Henk)

    1996-01-01

    textabstractOrganizational flexibility has recently received much attention from researchers, management consultants and practitioners. In general, the term 'flexibility' has a positive connotation: flexible organizations are the better ones. However, the meaning of flexibility as well as its

  18. On the concept of flexibility : A dual control perspective

    NARCIS (Netherlands)

    de Leeuw, A.C.J.; Volberda, H.W.

    Organizational flexibility has recently received much attention from researchers, management consultants and practitioners, In general, the term 'flexibility' has a positive connotation: flexible organizations are the better ones. However, the meaning of flexibility as well as its relation to the

  19. Flexible network wireless transceiver and flexible network telemetry transceiver

    Science.gov (United States)

    Brown, Kenneth D.

    2008-08-05

    A transceiver for facilitating two-way wireless communication between a baseband application and other nodes in a wireless network, wherein the transceiver provides baseband communication networking and necessary configuration and control functions along with transmitter, receiver, and antenna functions to enable the wireless communication. More specifically, the transceiver provides a long-range wireless duplex communication node or channel between the baseband application, which is associated with a mobile or fixed space, air, water, or ground vehicle or other platform, and other nodes in the wireless network or grid. The transceiver broadly comprises a communication processor; a flexible telemetry transceiver including a receiver and a transmitter; a power conversion and regulation mechanism; a diplexer; and a phased array antenna system, wherein these various components and certain subcomponents thereof may be separately enclosed and distributable relative to the other components and subcomponents.

  20. Fare astronomia con piccoli telescopi

    CERN Document Server

    Gainer, Michael K

    2007-01-01

    Non sono necessariamente richiesti strumenti mastodontici per produrre risultati scientificamente validi nel campo dell’astronomia. Anche l’astrofilo dotato di un piccolo telescopio, con un diametro di soli 8-9 cm, può contribuire alla scienza del cielo realizzando utili osservazioni del Sole, della Luna, dei pianeti, delle comete, degli asteroidi, delle stelle doppie o variabili, delle nebulose e degli ammassi stellari. Il manuale di M.K. Gainer spiega quale sia la dotazione minima (un piccolo telescopio, un computer, una semplice fotocamera digitale), come utilizzarla, e quali siano le tecniche appropriate da adottare nelle osservazioni. Offre inoltre schemi per interpretare e ridurre i dati raccolti, nonché schede da compilare e da spedire ai centri di raccolta internazionali. Questo libro è il passaporto grazie al quale l’astrofilo può entrare a pieno titolo nel mondo affascinante della scienza astronomica.

  1. Cognitive Flexibility in Obsessive Compulsive Disorder

    DEFF Research Database (Denmark)

    Jónsson, Hjalti; Salkovskis, Paul M.

    BT for problems such as OCD requires a level of cognitive flexibility (that is the ability to take a different perspective on ones problems). It could be argued that problems in set shifting (by neuropsychological tests) might underpin problems in this area. Two assessments were used (1: perception...... of cognitive flexibility was assessed by questionnaire 2: neuropsychological evaluation of set shifting). This study will recruit three groups: OCD patients, anxious and healthy controls. Cognitive flexibility is measured using modified version of the Cognitive Flexibility Scale (Martin & Rubin, 1995......) and neuropsychological measures of cognitive flexibility (Wisconsin Cart Sorting Test, Trail Making Test A/B, The Brixton Test). IN addition to the group comparison, the relationship between perceived flexibility, set shifting and psychopathology will be investigated. The implications of the findings for treatment...

  2. Retrofitting for fossil fuel flexibility

    International Nuclear Information System (INIS)

    Newell, J.; Trueblood, R.C.; Lukas, R.W.; Worster, C.M.; Marx, P.D.

    1991-01-01

    Described in this paper are two fossil plant retrofits recently completed by the Public Service Company of New Hampshire that demonstrate the type of planning and execution required for a successful project under the current regulatory and budget constraints. Merrimack Units 1 and 2 are 120 MW and 338 MW nominal cyclone-fired coal units in Bow, New Hampshire. The retrofits recently completed at these plants have resulted in improved particulate emissions compliance, and the fuel flexibility to allow switching to lower sulphur coals to meet current and future SO 2 emission limits. Included in this discussion are the features of each project including the unique precipitator procurement approach for the Unit 1 Retrofit, and methods used to accomplish both retrofits within existing scheduled maintenance outages through careful planning and scheduling, effective use of pre-outage construction, 3-D CADD modeling, modular construction and early procurement. Operating experience while firing various coals in the cyclone fired boilers is also discussed

  3. International Expansion through Flexible Replication

    DEFF Research Database (Denmark)

    Jonsson, Anna; Foss, Nicolai Juul

    2011-01-01

    Business organizations may expand internationally by replicating a part of their value chain, such as a sales and marketing format, in other countries. However, little is known regarding how such “international replicators” build a format for replication, or how they can adjust it in order to ada......, etc.) are replicated in a uniform manner across stores, and change only very slowly (if at all) in response to learning (“flexible replication”). We conclude by discussing the factors that influence the approach to replication adopted by an international replicator.......Business organizations may expand internationally by replicating a part of their value chain, such as a sales and marketing format, in other countries. However, little is known regarding how such “international replicators” build a format for replication, or how they can adjust it in order to adapt...

  4. Security and labour market flexibility

    DEFF Research Database (Denmark)

    Refslund, Bjarke; Rasmussen, Stine; Sørensen, Ole H.

    2017-01-01

    In the face of the economic and financial crisis, several European countries have implemented a number of structural reforms to increase employment and the flexibility of the labour market, in particular by reducing employment protection in an effort to deregulate labour markets. Reform proponents...... employment. Conversely, reform opponents claim that this view builds on a misguided view of labour market dynamics. They do not believe that such reforms will lead to job growth, asserting that such reforms are as likely to reduce as to increase employment and that they will lead to growing inequality...... and labour market segmentation. In Denmark, employee protection in terms of notice periods and dismissal compensation, which is mainly regulated by collective agreement, is among the lowest in the EU. Unemployment was, before the crisis, among the lowest in the EU but the crisis also negatively affected...

  5. Flexible Working Time Arrangements in Bulgaria

    OpenAIRE

    Beleva, Iskra

    2009-01-01

    The objective of this paper is to analyze the flexible working time arrangements in Bulgaria, using a life-course perspective. Two important features have to be outlined, namely: underdeveloped flexible forms of employment in the country, including working time arrangement, and lack of previous analysis on flexible working time arrangements from the angle of life-course perspective. The author describes the regulatory framework, collective agreements at national and company level as a frame w...

  6. Bio-Inspired Flexible Cellular Actuating Systems

    Science.gov (United States)

    2013-11-21

    S. Hong, “Robust adaptive boundary control of a flexible marine riser with vessel dynamics,” Automatica, vol. 47, pp. 722–732, 2011. [22] D. H...conditionally accepted. [6] W. He, S. S. Ge, B. V. E. How, Y. S. Choo, and K. S. Hong, “Robust adaptive boundary control of a flexible marine riser ... flexible robotic actuators, often represented by a distributed parameter system or a partial differential equation. We establish a model-guided

  7. Flexibility in 21st Century Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, J.; Miller, M.; Zinaman, O.; Milligan, M.; Arent, D.; Palmintier, B.; O' Malley, M.; Mueller, S.; Lannoye, E.; Tuohy, A.; Kujala, B.; Sommer, M.; Holttinen, H.; Kiviluoma, J.; Soonee, S. K.

    2014-05-01

    Flexibility of operation--the ability of a power system to respond to change in demand and supply--is a characteristic of all power systems. Flexibility is especially prized in twenty-first century power systems, with higher levels of grid-connected variable renewable energy (primarily, wind and solar). This paper summarizes the analytic frameworks that have emerged to measure this characteristic and distills key principles of flexibility for policy makers.

  8. Flexible benefit plans in Dutch organisations

    OpenAIRE

    Hillebrink, C.

    2006-01-01

    Flexible benefit plans give employees a greater say over the composition of their benefits than traditional Dutch benefit plans. These arrangements developed in a time of further individualisation, increasing flexibility in the workplace, and a tight labour market in the Netherlands. By giving employees a choice in the way they are paid, employers hoped to become more attractive employers, and lend a helping hand to employees who were combining work and care. In this study, flexible benefit p...

  9. Labor Supply Flexibility and Portfolio Choice

    OpenAIRE

    Zvi Bodie; William Samuelson

    1989-01-01

    This paper develops a model showing that people who have flexibility in choosing how much to work will prefer to invest substantially more of their money in risky assets than if they had no such flexibility. Viewed in this way, labor supply flexibility offers insurance against adverse investment outcomes. The model provides support for the conventional wisdom that the young can tolerate more risk in their investment portfolios than the old. The model has other implications for the study of ho...

  10. Depresion en pacientes con alteraciones del tiroides

    OpenAIRE

    Radanovic-Grguric´, Ljiljana; Filakovic´, Pavo; Barkic´, Jelena; Mandic´, Nikola; Karner, Ivan; Smoje, Juraj

    2003-01-01

    Nuestro estudio fue realizado en un grupo de 53 mujeres con disfunción tiroidea y 28 mujeres con depresión mayor. Empleamos la Escala de la Depresión de Hamilton, la Escala de Autoevaluación de la Depresión de Zung y la Escala sobre la Impresión Clínica Global. Los resultados del estudio demuestran que la mayoría de los pacientes con disfunción tiroidea se mostraron clínicamente significativos en cuanto al trastorno depresivo. Los episodios depresivos son más frecuentes en pacientes con hipot...

  11. Aprende Ajedrez con Rey - Parte 2

    OpenAIRE

    ESTÉVEZ MONTERO, RAÚL; Lloret Mauri, Jaime

    2016-01-01

    Es una pieza audiovisual creada con el objeto de atraer la atención de los niños de muy corta edad con el ajedrez y familiarizarlos con todas sus piezas y movimientos. Es una animación dirigida a un público infantil presentada por dibujos animados en 2D, en la que se ha intentado respetar en todo momento el argot de la comunidad ajedredística. En este video se presenta la segunda parte. Estévez Montero, R.; Lloret Mauri, J. (2016). Aprende Ajedrez con Rey - Parte 2. http://hdl.handle.net/1...

  12. Aprende Ajedrez con Rey - Parte 1

    OpenAIRE

    ESTÉVEZ MONTERO, RAÚL; Lloret Mauri, Jaime

    2016-01-01

    Es una pieza audiovisual creada con el objeto de atraer la atención de los niños de muy corta edad con el ajedrez y familiarizarlos con todas sus piezas y movimientos. Es una animación dirigida a un público infantil presentada por dibujos animados en 2D, en la que se ha intentado respetar en todo momento el argot de la comunidad ajedredística. En este video se presenta la primera parte. Estévez Montero, R.; Lloret Mauri, J. (2016). Aprende Ajedrez con Rey - Parte 1. http://hdl.handle.net/1...

  13. High Performance Electronics on Flexible Silicon

    KAUST Repository

    Sevilla, Galo T.

    2016-09-01

    Over the last few years, flexible electronic systems have gained increased attention from researchers around the world because of their potential to create new applications such as flexible displays, flexible energy harvesters, artificial skin, and health monitoring systems that cannot be integrated with conventional wafer based complementary metal oxide semiconductor processes. Most of the current efforts to create flexible high performance devices are based on the use of organic semiconductors. However, inherent material\\'s limitations make them unsuitable for big data processing and high speed communications. The objective of my doctoral dissertation is to develop integration processes that allow the transformation of rigid high performance electronics into flexible ones while maintaining their performance and cost. In this work, two different techniques to transform inorganic complementary metal-oxide-semiconductor electronics into flexible ones have been developed using industry compatible processes. Furthermore, these techniques were used to realize flexible discrete devices and circuits which include metal-oxide-semiconductor field-effect-transistors, the first demonstration of flexible Fin-field-effect-transistors, and metal-oxide-semiconductors-based circuits. Finally, this thesis presents a new technique to package, integrate, and interconnect flexible high performance electronics using low cost additive manufacturing techniques such as 3D printing and inkjet printing. This thesis contains in depth studies on electrical, mechanical, and thermal properties of the fabricated devices.

  14. Processes and Materials for Flexible PV Arrays

    National Research Council Canada - National Science Library

    Gierow, Paul

    2002-01-01

    .... A parallel incentive for development of flexible PV arrays are the possibilities of synergistic advantages for certain types of spacecraft, in particular the Solar Thermal Propulsion (STP) Vehicle...

  15. Flexible UAV Mission Management Using Emerging Technologies

    National Research Council Canada - National Science Library

    Desimone, Roberto; Lee, Richard

    2002-01-01

    This paper discusses recent results and proposed work in the application of emerging artificial intelligence technologies for flexible mission management, especially for unmanned (combat) airborne vehicles...

  16. INTEGRACION DE UNA CELULA FLEXIBLE DE MECANIZADO, DE TIPO DOCENTE INTEGRATION OF A EDUCATIONAL FLEXIBLE MANUFACTURING CELL

    Directory of Open Access Journals (Sweden)

    Abraham Farias F

    2007-04-01

    Full Text Available Este trabajo trata sobre la integración de una célula flexible de mecanizado de tipo docente, compuesta por una fresadora didáctica CNC, marca Denford, un brazo robótico articulado de seis ejes, modelo Scorbot -ER Vplus  y un riel deslizante; todos pertenecientes al Laboratorio de Manufactura Integrada por Computador, de la Escuela de Ingeniería Mecánica de la Universidad de Talca. Las tareas que realiza esta célula flexible son controladas por un PC director  a través de un  programa, utilizando el software y el propio control del robot y su objetivo es realizar el ciclo de carga y descarga de un  trozo de material de 65×65×40 mm. (madera y su posterior mecanización. El problema de comunicación entre los equipos involucrados y la fresadora CNC fue resuelto en cuanto su diseño "stand alone" no contemplaba la integración con otros equipos. Por otro lado, se agregaron algunos sistemas electroneumáticos para que la operación fuera automática, como los de sujeción de piezas y la apertura y cierre de puertas. Con esta célula flexible de mecanizado de tipo docente, la facultad de Ingeniería cuenta con una plataforma básica, a la que se puede adicionar otras funciones, como por ejemplo, dotarla de un sistema automático de alimentación de piezas, de un sistema de visión digital para dar más autonomía al robot, incorporar un torno CNC y  generar un programa para administrar las órdenes de trabajo.This paper describes the integration of an educational flexible manufacturing cell, consisting of a Denford CNC mill with six axes, and a Scorbot - ER Vplus robotic arm that slides along a rail. This equipment is located at the Computer Integrated Manufacture Laboratory, at the School of Mechanical Engineering at Universidad de Talca. The flexible cell is controlled by software in a PC that interacts with the software in the robotic arm. The specific tasks described in this paper are loading and unloading a wooden piece (640×65

  17. THE FLEXIBILITY-AUTOMATION CORRESPONDENCE TO A VIRTUAL COMMERCIAL SOCIETY

    Directory of Open Access Journals (Sweden)

    Liliana Doble

    2012-01-01

    Full Text Available Design and operation of FMS is based on system requirement can be as productive and flexible as necessary, i.e. obtaining controlled correspondence between the degree of flexibility and automation of system.The flexibility of a FMS (Flexible Manufacturing Systems is determined by two important criteria: Flexible hardware structure of the system; Flexible software structure. Flexible hardware structure of the CS system (calculation system is determined to its turn according to three components: Flexibility of technological subsystem; Flexibility subsystem of storage, transport and handling;Flexibility of informational subsystem.

  18. Dynamic Model of a Rotating Flexible Arm-Flexible Root Mechanism Driven by a Shaft Flexible in Torsion

    Directory of Open Access Journals (Sweden)

    S.Z. Ismail

    2006-01-01

    Full Text Available This paper presents a dynamic model of a rotating flexible beam carrying a payload at its tip. The model accounts for the driving shaft and the arm root flexibilities. The finite element method and the Lagrangian dynamics are used in deriving the equations of motion with the small deformation theory assumptions and the Euler-Bernoulli beam theory. The obtained model is a nonlinear-coupled system of differential equations. The model is simulated for different combinations of shaft and root flexibilities and arm properties. The simulation results showed that the root flexibility is an important factor that should be considered in association with the arm and shaft flexibilities, as its dynamics influence the motor motion. Moreover, the effect of system non-linearity on the dynamic behavior is investigated by simulating the equivalent linearized system and it was found to be an important factor that should be considered, particularly when designing a control strategy for practical implementation.

  19. Plantas cubanas con efecto antiinflamatorio

    Directory of Open Access Journals (Sweden)

    Ada Ivis Regalado Veloz

    Full Text Available La actividad antiinflamatoria suscita gran interés científico en el área farmacológica, debido a que muchas enfermedades en su evolución cursan por procesos inflamatorios (artritis reumatoide, ateroesclerosis, cáncer, diabetes, gota, asma, dermatitis, trastornos neurodegenerativos y diversas dolencias menores. Las enfermedades inflamatorias constituyen un problema de salud importante, debido a la falta de medicamentos eficaces y seguros para su uso por periodos prolongados. Hoy en día se trabaja en la búsqueda de alternativas de antiinflamatorios más seguros, en el que las plantas medicinales, una de las formas más antiguas de tratamiento, constituyen una elección a considerar. En este trabajo se realizó una revisión bibliográfica, sobre especies de plantas que crecen en Cuba que le reportan propiedades farmacológicas como antinflamatorios. En la revisión de la literatura se utilizó la base de datos Medline (vía PubMed, así como revistas nacionales desde el periodo de 2000 hasta el presente, con las palabras claves "inflamación" y "plantas cubanas antiinflamatorias" o "actividad antiinflamatoria" y "plantas medicinales".

  20. Hospitalidad, con y sin papeles

    Directory of Open Access Journals (Sweden)

    Ana Paula Penchaszadeh

    Full Text Available Resumen El objetivo de este artículo es vincular el trabajo sobre el archivo de Jacques Derrida con la experiencia de la hospitalidad. Se intentará mostrar que, por un lado, se trata siempre de los papeles, de la legitimidad que éstos otorgan o no tanto a nivel filosófico (deseo de poseer los papeles que autoricen tal o cual decisión interpretativa, como a nivel político ("tener papeles" como el principio básico de todo derecho a tener derechos, de todo derecho a la comunidad. Mas también, por otro lado, se intentará pensar aquello que arruina la idea misma de tener o no tener (papeles, la idea de propiedad, aquello que hace imposible fundar una decisión o identidad en última instancia y, por ende, una soberanía, una frontera. La hospitalidad, la llegada inminente del otro, representa un desafío político y ético para la filosofía: pues no se trata de un saber, sino de una experiencia transformando el sustrato del nos-otros, del ser común.

  1. Itinerari Musicali con la Wiild

    Directory of Open Access Journals (Sweden)

    Elisabetta Nanni

    2013-03-01

    Full Text Available La Wiild, acronimo di Wiimote Lavagna Digitale, è uno strumento didattico che utilizza il telecomando della Wii, il famoso gioco della Nintendo, insieme a un software libero, rendendolo così estremamente versatile. Non vincolato a software proprietario, il suo utilizzo è legato alla capacità dell’insegnante di ripartire dalla didattica, dalle risorse selezionate e dall’epistemologia di ogni singola disciplina, trovando così nel proprio contesto un ruolo per le tecnologie. Il contributo presenta ipotesi di lavoro per l’educazione musicale nella scuola secondaria di primo grado che si sviluppano sia attraverso lo studio del rapporto suono/segno con affinità pittoriche e successiva codificazione grafica, sia attraverso un’attività di laboratorio in cui co-costruire percorsi storico-musicali. La Wiild diventerà davvero utile ed efficace nel momento in cui, affiancando le risorse selezionate dal docente, verrà utilizzata senza essere notata, giocando un ruolo di strumento tecnologico «normale e trasparente».

  2. Cloud flexibility using DIRAC interware

    International Nuclear Information System (INIS)

    Albor, Víctor Fernandez; Miguelez, Marcos Seco; Silva, Juan Jose Saborido; Pena, Tomas Fernandez; Muñoz, Victor Mendez; Diaz, Ricardo Graciani

    2014-01-01

    Communities of different locations are running their computing jobs on dedicated infrastructures without the need to worry about software, hardware or even the site where their programs are going to be executed. Nevertheless, this usually implies that they are restricted to use certain types or versions of an Operating System because either their software needs an definite version of a system library or a specific platform is required by the collaboration to which they belong. On this scenario, if a data center wants to service software to incompatible communities, it has to split its physical resources among those communities. This splitting will inevitably lead to an underuse of resources because the data centers are bound to have periods where one or more of its subclusters are idle. It is, in this situation, where Cloud Computing provides the flexibility and reduction in computational cost that data centers are searching for. This paper describes a set of realistic tests that we ran on one of such implementations. The test comprise software from three different HEP communities (Auger, LHCb and QCD phenomelogists) and the Parsec Benchmark Suite running on one or more of three Linux flavors (SL5, Ubuntu 10.04 and Fedora 13). The implemented infrastructure has, at the cloud level, CloudStack that manages the virtual machines (VM) and the hosts on which they run, and, at the user level, the DIRAC framework along with a VM extension that will submit, monitorize and keep track of the user jobs and also requests CloudStack to start or stop the necessary VM's. In this infrastructure, the community software is distributed via the CernVM-FS, which has been proven to be a reliable and scalable software distribution system. With the resulting infrastructure, users are allowed to send their jobs transparently to the Data Center. The main purpose of this system is the creation of flexible cluster, multiplatform with an scalable method for software distribution for

  3. Magnetoelectric Nanocomposites for Flexible Electronics

    KAUST Repository

    Al-Nassar, Mohammed Y.

    2015-09-01

    Flexibility, low cost, versatility, miniaturization and multi-functionality are key aspects driving research and innovation in many branches of the electronics industry. With many anticipated emerging applications, like wearable, transparent and biocompatible devices, interest among the research community in pursuit for novel multifunctional miniaturized materials have been amplified. In this context, multiferroic polymer-based nanocomposites, possessing both ferroelectricity and ferromagnetism, are highly appealing. Most importantly, these nanocomposites possess tunable ferroelectric and ferromagnetic properties based on the parameters of their constituent materials as well as the magnetoelectric effect, which is the coupling between electric and magnetic properties. This tunability and interaction is a fascinating fundamental research field promising tremendous potential applications in sensors, actuators, data storage and energy harvesting. This dissertation work is devoted to the investigation of a new class of multiferroic polymer-based flexible nanocomposites, which exhibits excellent ferromagnetism and ferroelectricity simultaneously at room temperature, with the goal of understanding and optimizing the origin of their magnetoelectric coupling. The nanocomposites consist of high aspect ratio ferromagnetic nanowires (NWs) embedded inside a ferroelectric co-polymer, poly(vinylindene fluoride-trifluoroethylene), P(VDF-TrFE) matrix. First, electrochemical deposition of ferromagnetic NWs inside anodic aluminum oxide membranes is discussed. Characterization of electrodeposited iron, nickel and highly magnetostrictive iron-gallium alloy NWs was done using XRD, electron and magnetic force microscopy. Second, different nanocomposite films have been fabricated by means of spin coating and drop casting techniques. The effect of incorporation of NWs inside the ferroelectric polymer on its electroactive phase is discussed. The remanent and saturation polarization as well

  4. Cloud flexibility using DIRAC interware

    Science.gov (United States)

    Fernandez Albor, Víctor; Seco Miguelez, Marcos; Fernandez Pena, Tomas; Mendez Muñoz, Victor; Saborido Silva, Juan Jose; Graciani Diaz, Ricardo

    2014-06-01

    Communities of different locations are running their computing jobs on dedicated infrastructures without the need to worry about software, hardware or even the site where their programs are going to be executed. Nevertheless, this usually implies that they are restricted to use certain types or versions of an Operating System because either their software needs an definite version of a system library or a specific platform is required by the collaboration to which they belong. On this scenario, if a data center wants to service software to incompatible communities, it has to split its physical resources among those communities. This splitting will inevitably lead to an underuse of resources because the data centers are bound to have periods where one or more of its subclusters are idle. It is, in this situation, where Cloud Computing provides the flexibility and reduction in computational cost that data centers are searching for. This paper describes a set of realistic tests that we ran on one of such implementations. The test comprise software from three different HEP communities (Auger, LHCb and QCD phenomelogists) and the Parsec Benchmark Suite running on one or more of three Linux flavors (SL5, Ubuntu 10.04 and Fedora 13). The implemented infrastructure has, at the cloud level, CloudStack that manages the virtual machines (VM) and the hosts on which they run, and, at the user level, the DIRAC framework along with a VM extension that will submit, monitorize and keep track of the user jobs and also requests CloudStack to start or stop the necessary VM's. In this infrastructure, the community software is distributed via the CernVM-FS, which has been proven to be a reliable and scalable software distribution system. With the resulting infrastructure, users are allowed to send their jobs transparently to the Data Center. The main purpose of this system is the creation of flexible cluster, multiplatform with an scalable method for software distribution for several

  5. Enclavado endomedular en fracturas del tercio distal de la tibia

    OpenAIRE

    Arroquy, Damian; Chahla, Jorge; Gomez Rodriguez, Gustavo; Cid Casteulani, Alberto; Svarzchtein, Santiago; Gomez, Diego; Pesciallo, Cesar

    2015-01-01

    Objetivo: Describir los resultados obtenidos con el enclavado endomedular acerrojado en pacientes con fractura del tercio distal de la tibia. Materiales y Métodos: Se incluyeron pacientes con fracturas desplazadas del tercio distal de la tibia, tratadas con clavo endomedular. La muestra incluyo 35 pacientes. El tiempo de seguimiento posoperatorio fue de 29.2 meses. Se evaluaron el tiempo de consolidacion, la consolidacion viciosa y las complicaciones. Los resultados funcionales se determinaro...

  6. Bases tratadas con cemento, en California

    Directory of Open Access Journals (Sweden)

    Chinchilla, M.

    1962-05-01

    Full Text Available El uso de bases tratadas con cemento para autopistas se inició en el Estado de California en 1938, empleándose para carreteras con determinadas condiciones de tráfico. Inicialmente, se especificó el uso obligatorio de plantas mezcladoras para asegurar el debido control de las proporciones adecuadas.

  7. Flexibility@Work 2013: yearly report on flexible labor and employment

    NARCIS (Netherlands)

    Berkhout, E.; Heyma, A.; Prins, J.

    2013-01-01

    There is no clear evidence that the strong growth in the share of flexible labor relations between 2002 and 2007 points at a worldwide trend towards a larger share of flexible labor at the expense of traditional open-ended labor contracts. The growth in flexible labor varies too much between

  8. Flexible Metal Oxide/Graphene Oxide Hybrid Neuromorphic Devices on Flexible Conducting Graphene Substrates

    OpenAIRE

    Wan, Chang Jin; Wang, Wei; Zhu, Li Qiang; Liu, Yang Hui; Feng, Ping; Liu, Zhao Ping; Shi, Yi; Wan, Qing

    2016-01-01

    Flexible metal oxide/graphene oxide hybrid multi-gate neuron transistors were fabricated on flexible graphene substrates. Dendritic integrations in both spatial and temporal modes were successfully emulated, and spatiotemporal correlated logics were obtained. A proof-of-principle visual system model for emulating lobula giant motion detector neuron was investigated. Our results are of great interest for flexible neuromorphic cognitive systems.

  9. Modelling Flexible Pavement Response and Performance

    DEFF Research Database (Denmark)

    Ullidtz, Per

    This textbook is primarily concerned with models for predicting the future condition of flexible pavements, as a function of traffic loading, climate, materials, etc., using analytical-empirical methods.......This textbook is primarily concerned with models for predicting the future condition of flexible pavements, as a function of traffic loading, climate, materials, etc., using analytical-empirical methods....

  10. Harnessing Flexibility from Hot and Cold

    DEFF Research Database (Denmark)

    Kiviluoma, Juha; Heinen, Steve; Qazi, Hassan

    2017-01-01

    As has been often reported, electricity systems with high levels of variable wind and solar power generation would benefit from demand flexibility. What is not as often mentioned is that electrification of the transport and heat sectors could exacerbate the need for flexibility, if they are imple...

  11. 47 CFR 1.774 - Pricing flexibility.

    Science.gov (United States)

    2010-10-01

    ... copies shall be served upon the Chief, Wireline Competition Bureau and the Chief, Pricing Policy Division... 47 Telecommunication 1 2010-10-01 2010-10-01 false Pricing flexibility. 1.774 Section 1.774..., and Reports Involving Common Carriers Tariffs § 1.774 Pricing flexibility. (a) Petitions. (1) A...

  12. Cognitive Flexibility in Drawings of Bilingual Children

    Science.gov (United States)

    Adi-Japha, Esther; Berberich-Artzi, Jennie; Libnawi, Afaf

    2010-01-01

    A. Karmiloff-Smith's (1990) task of drawing a nonexistent object is considered to be a measure of cognitive flexibility. The notion of earlier emergence of cognitive flexibility in bilingual children motivated the current researchers to request 4- and 5-year-old English-Hebrew and Arabic-Hebrew bilingual children and their monolingual peers to…

  13. New business model of flexible housing

    NARCIS (Netherlands)

    Zairul, Z.; Geraedts, R.P.

    2015-01-01

    The Open Building (OB) and the concept of flexible housing has alwaysassociated with user’s ability to respond to changing demand. It is necessary that housing can adap to changing market conditions and different users’ requirements. Flexibility makes a crucial concept that one cannot ignore.

  14. The Flexibility of Pusher Furnace Grate

    Directory of Open Access Journals (Sweden)

    Słowik J.A.

    2016-12-01

    Full Text Available The lifetime of guide grates in pusher furnaces for heat treatment could be increased by raising the flexibility of their structure through, for example, the replacement of straight ribs, parallel to the direction of grate movement, with more flexible segments. The deformability of grates with flexible segments arranged in two orientations, i.e. crosswise (perpendicular to the direction of compression and lengthwise (parallel to the direction of compression, was examined. The compression process was simulated using SolidWorks Simulation program. Relevant regression equations were also derived describing the dependence of force inducing the grate deformation by 0.25 mm ‒ modulus of grate elasticity ‒ on the number of flexible segments in established orientations. These calculations were made in Statistica and Scilab programs. It has been demonstrated that, with the same number of segments, the crosswise orientation of flexible segments increases the grate structure flexibility in a more efficient way than the lengthwise orientation. It has also been proved that a crucial effect on the grate flexibility has only the quantity and orientation of segments (crosswise / lengthwise, while the exact position of segments changes the grate flexibility by less than 1%.

  15. Working Hours Flexibility. Background Paper No. 30.

    Science.gov (United States)

    Staines, Graham L.

    Flexible work schedules offer the promise of a low-cost option for helping people manage work and family responsibilities. Alternative work schedules include part-time work, job sharing, work sharing, shiftwork, compressed work week, flexitime, and flexiplace. Flexitime is the most prevalent full-time flexible schedule and is second in prevalence…

  16. High-flexibility, noncollapsing lightweight hose

    Science.gov (United States)

    Williams, D.A.

    1993-04-20

    A high-flexibility, noncollapsing, lightweight, large-bore, wire-reinforced hose is inside fiber-reinforced PVC tubing that is flexible, lightweight, and abrasion resistant. It provides a strong, kink- and collapse-free conduit for moving large quantities of dangerous fluids, e.g., removing radioactive waste water or processing chemicals.

  17. Flexible Learning in an Information Society

    Science.gov (United States)

    Khan, Badrul, Ed.

    2007-01-01

    Flexible Learning in an Information Society uses a flexible learning framework to explain the best ways of creating a meaningful learning environment. This framework consists of eight factors--institutional, management, technological, pedagogical, ethical, interface design, resource support, and evaluation--and a systematic understanding of these…

  18. Flexible job shop scheduling problem in manufacturing

    OpenAIRE

    Curralo, Ana; Pereira, Ana I.; Barbosa, José; Leitão, Paulo

    2013-01-01

    This paper addresses a real assembly cell: the AIP-PRIMECA cell at the Université de Valenciennes et du Hainaut-Cambrésis, in France. This system can be viewed as a Flexible Job Shop, leading to the formulation of a Flexible Job Shop Scheduling Problem (FJSSP).

  19. Flexible protective gloves: The emperor's new clothes

    International Nuclear Information System (INIS)

    Kelsey, C.A.; Mettler, F.A. Jr.

    1990-01-01

    The risk of developing skin cancer is estimated for interventional radiologists who do and do not wear thin, flexible protective leaded gloves. The use of these gloves is extremely expensive in terms of dollars per potential cancer prevented. Good radiographic practice without the use of flexible protective gloves provides adequate protection

  20. Quality and workflow integration in flexible manufacturing

    NARCIS (Netherlands)

    ten Dam, Dennis

    2012-01-01

    In recognising the relevance of production networks and flexible manufacturing, CNC Worknet aims to be a company that approaches the new era of flexible manufacturing by developing a novel business model that combines the technologies of e-Business with production networks. This business model is

  1. Role of Flexibility in Sustainable Port Development

    NARCIS (Netherlands)

    Taneja, P.; Vellinga, T.; Ros, R.

    2012-01-01

    Sustainability has become a high profile objective in all aspects of our lives, including the development of our infrastructures. Flexibility can enhance sustainability endeavors, yet its contribution is not clear to most. In this paper we investigate the role of flexibility in sustainable port

  2. Operational Flexibility Responses to Environmental Uncertainties

    OpenAIRE

    Miller, Kent D.

    1994-01-01

    This study develops and tests a behavioral model of organizational changes in operational flexibility. Regression results using an international data set provide strong support for the general proposition that uncertainties associated with different environmental components--poitical, government policy, macroeconomic, competitive, input and product demand uncertainties--have different implications for firm internal, locational, and supploer flexibility. Slack acts as a buffer attenuating, a...

  3. Flexible benefit plans in Dutch organisations

    NARCIS (Netherlands)

    Hillebrink, C.

    2006-01-01

    Flexible benefit plans give employees a greater say over the composition of their benefits than traditional Dutch benefit plans. These arrangements developed in a time of further individualisation, increasing flexibility in the workplace, and a tight labour market in the Netherlands. By giving

  4. Studies of a flexible heliac configuration

    International Nuclear Information System (INIS)

    Hender, T.C.; Cantrell, J.L.; Harris, J.H.

    1987-07-01

    This paper documents a detailed study of the Flexible Heliac configuration. The remarkable flexibility of this device - which allows variation of the rotational transform, shear, and magnetic well depth over a relatively wide range - is described. Engineering considerations of error fields, finite cross-section conductors, and plasma coil clearances are also discussed

  5. 77 FR 8082 - Regulatory Flexibility Agenda

    Science.gov (United States)

    2012-02-13

    ... Required: Yes. Agency Contact: Alicia Goldin, Division of Trading and Markets, Securities and Exchange.../01/11 Regulatory Flexibility Analysis Required: Yes. Agency Contact: Alicia Goldin, Division of... Withdrawn 10/01/11 Regulatory Flexibility Analysis Required: Yes. Agency Contact: Alicia Goldin, Division of...

  6. Smart Tendon Actuated Flexible Actuator

    Directory of Open Access Journals (Sweden)

    Md. Masum Billah

    2015-01-01

    Full Text Available We investigate the kinematic feasibility of a tendon-based flexible parallel platform actuator. Much of the research on tendon-driven Stewart platforms is devoted either to the completely restrained positioning mechanism (CRPM or to one particular type of the incompletely restrained positioning mechanism (IRPM where the external force is provided by the gravitational pull on the platform such as in cable-suspended Stewart platforms. An IRPM-based platform is proposed which uses the external force provided by a compliant member. The compliant central column allows the configuration to achieve n DOFs with n tendons. In particular, this investigation focuses on the angular deflection of the upper platform with respect to the lower platform. The application here is aimed at developing a linkable module that can be connected to one another so as to form a “snake robot” of sorts. Since locomotion takes precedence over positioning in this application, a 3-DOF Stewart platform is adopted. For an arbitrary angular displace of the end-effector, the corresponding length of each tendon can be determined through inverse kinematics. Mathematical singularities are investigated using the traditional analytical method of defining the Jacobian.

  7. Falling films on flexible inclines

    Science.gov (United States)

    Matar, O. K.; Craster, R. V.; Kumar, S.

    2007-11-01

    The nonlinear stability and dynamic behavior of falling fluid films is studied for flow over a flexible substrate. We use asymptotic methods to deduce governing equations valid in various limits. Long-wave theory is used to derive Benney-like coupled equations for the film thickness and substrate deflection. Weakly nonlinear equations are then derived from these equations that, in the limit of large wall damping and/or large wall tension, reduce to the Kuramoto-Sivashinsky equation. These models break down when inertia becomes more significant, so we also use a long-wave approximation in conjunction with integral theory to derive three strongly coupled nonlinear evolution equations for the film thickness, substrate deflection, and film volumetric flow rate valid at higher Reynolds numbers. These equations, accounting for inertia, capillary, viscous, wall tension, and damping effects, are solved over a wide range of parameters. Our results suggest that decreasing wall damping and/or wall tension can promote the development of chaos in the weakly nonlinear regime and lead to severe substrate deformations in the strongly nonlinear regime; these can give rise to situations in which the free surface and underlying substrate come into contact in finite time.

  8. Mundari as a flexible language

    DEFF Research Database (Denmark)

    Hengeveld, Kees; Rijkhoff, Jan

    2005-01-01

    and verbs), thus disputing E&O’s claim that Mundari has clearly definable classes of verbs and nouns. The last section is concerned with a set of grammatical features which correlate with the presence of flexible lexemes in a language. It is concluded that Mundari displays all of the predicted features......In this paper we intend to show that Mundari is one of the languages without distinct classes of verbs and nouns as far as its basic, non-derived vocabulary is concerned. Our contribution is organized as follows. Section 2 briefly presents a typology of parts-of-speech (PoS) systems, followed...... by a critical evaluation of the three criteria Evans & Osada (E&O - this volume) use to establish the lack of word class distinctions in a language (section 3). In section 4 we present evidence to support our claim that Mundari has ‘flexible’ basic lexemes (i.e. there is no fundamental distinction between nouns...

  9. Mechanical flexible joint design document

    Science.gov (United States)

    Daily, Vic

    1993-01-01

    The purpose of this report is to document the status of the Mechanical Flexible Joint (MFJ) Design Subtask with the intent of halting work on the design. Recommendations for future work is included in the case that the task is to be resumed. The MFJ is designed to eliminate two failure points from the current flex joint configuration, the inner 'tripod configuration' and the outer containment jacket. The MFJ will also be designed to flex 13.5 degrees and have three degrees of freedom. By having three degrees of freedom, the MFJ will allow the Low Pressure Fuel Duct to twist and remove the necessity to angulate the full 11 degrees currently required. The current flex joints are very labor intensive and very costly and a simple alternative is being sought. The MFJ is designed with a greater angular displacement, with three degrees of freedom, to reside in the same overall envelope, to meet weight constraints of the current bellows, to be compatible with cryogenic fuel and oxidizers, and also to be man-rated.

  10. Imparting Icephobicity with Substrate Flexibility

    Science.gov (United States)

    Schutzius, Thomas; Vasileiou, Thomas; Poulikakos, Dimos

    2017-11-01

    Ice accumulation poses serious safety and performance issues for modern infrastructure. Rationally designed superhydrophobic surfaces have demonstrated potential as a passive means to mitigate ice accretion; however, further studies on solutions that reduce impalement and contact time for impacting supercooled droplets are urgently needed. Here we demonstrate the collaborative effect of substrate flexibility and surface texture on enhancing icephobicity and repelling viscous droplets. We first investigate the influence of increased viscosity on impalement resistance and droplet-substrate contact time. Then we examine the effect of droplet partial solidification on recoil by impacting supercooled water droplets onto surfaces containing ice nucleation promoters. We demonstrate a passive method for shedding partially solidified droplets that does not rely on the classic recoil mechanism. Using an energy-based model, we identify a previously unexplored mechanism whereby the substrate oscillation governs the rebound process by efficiently absorbing the droplet kinetic energy and rectifying it back, allowing for droplet recoil. This mechanism applies for a range of droplet viscosities and ice slurries, which do not rebound from rigid superhydrophobic substrates. Partial support of the Swiss National Science Foundation under Grant No. 162565 and the European Research Council under Advanced Grant No. 669908 (INTICE) is acknowledged.

  11. Flexible resources for quantum metrology

    Science.gov (United States)

    Friis, Nicolai; Orsucci, Davide; Skotiniotis, Michalis; Sekatski, Pavel; Dunjko, Vedran; Briegel, Hans J.; Dür, Wolfgang

    2017-06-01

    Quantum metrology offers a quadratic advantage over classical approaches to parameter estimation problems by utilising entanglement and nonclassicality. However, the hurdle of actually implementing the necessary quantum probe states and measurements, which vary drastically for different metrological scenarios, is usually not taken into account. We show that for a wide range of tasks in metrology, 2D cluster states (a particular family of states useful for measurement-based quantum computation) can serve as flexible resources that allow one to efficiently prepare any required state for sensing, and perform appropriate (entangled) measurements using only single qubit operations. Crucially, the overhead in the number of qubits is less than quadratic, thus preserving the quantum scaling advantage. This is ensured by using a compression to a logarithmically sized space that contains all relevant information for sensing. We specifically demonstrate how our method can be used to obtain optimal scaling for phase and frequency estimation in local estimation problems, as well as for the Bayesian equivalents with Gaussian priors of varying widths. Furthermore, we show that in the paradigmatic case of local phase estimation 1D cluster states are sufficient for optimal state preparation and measurement.

  12. Flexible resources for quantum metrology

    International Nuclear Information System (INIS)

    Friis, Nicolai; Orsucci, Davide; Skotiniotis, Michalis; Sekatski, Pavel; Dunjko, Vedran; Briegel, Hans J; Dür, Wolfgang

    2017-01-01

    Quantum metrology offers a quadratic advantage over classical approaches to parameter estimation problems by utilising entanglement and nonclassicality. However, the hurdle of actually implementing the necessary quantum probe states and measurements, which vary drastically for different metrological scenarios, is usually not taken into account. We show that for a wide range of tasks in metrology, 2D cluster states (a particular family of states useful for measurement-based quantum computation) can serve as flexible resources that allow one to efficiently prepare any required state for sensing, and perform appropriate (entangled) measurements using only single qubit operations. Crucially, the overhead in the number of qubits is less than quadratic, thus preserving the quantum scaling advantage. This is ensured by using a compression to a logarithmically sized space that contains all relevant information for sensing. We specifically demonstrate how our method can be used to obtain optimal scaling for phase and frequency estimation in local estimation problems, as well as for the Bayesian equivalents with Gaussian priors of varying widths. Furthermore, we show that in the paradigmatic case of local phase estimation 1D cluster states are sufficient for optimal state preparation and measurement. (paper)

  13. IEA EBC Annex 67 Energy Flexible Buildings

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Jensen, Søren Østergaard

    2016-01-01

    know ledge on and demonstration of the Energy Flexibility Buildings can provide for the energy grids as well of to identify critical aspects and possible solutions to manage this Energy Flexibility. The paper discusses the background, the aims and the work plan of IEA (International Energy Agency) EBC......The foreseen large deployment of renewable energy sources may seriously affect the stability of energy grids. It will be necessary to control energy consumption to match instantaneous energy production. The built-in Energy Flexibility in buildings may be utilized for stabilizing the energy grids......, allowing for a larger roll out of renewable technologies. The Energy Flexibility of a building is the ability to manage its energy demand and generation according to local climate conditions, user needs and grid requirements. Energy Flexibility of buildings will thus allow for demand side management...

  14. Fuerza manual de adultos con discapacidad intelectual

    Directory of Open Access Journals (Sweden)

    Ruth Cabeza Ruiz

    2017-09-01

    Full Text Available Objetivo. Presentar una descripción de la fuerza de prensión manual de hombres y mujeres con discapacidad intelectual (DI y comparar los resultados con valores de referencia de otras personas con y sin discapacidad intelectual. Método. El presente trabajo es un estudio transversal observacional, financiado por la Fundación SAMU, en el que se evaluaron a 122 personas con DI (86 hombres y 36 mujeres durante el desarrollo de unas jornadas de carácter recreativo en las que participaron varias asociaciones de atención a este colectivo. La batería de test utilizada fue el Alpaha-Fit Test Battery for Adults. Resultados. Se presentan los resultados relacionados con las variables de fuerza del miembro superior (Hand Grip Strength por grupos de edad (20-24, 25- 29, 30-34, 35-39, 40-44, 45-49, 50-54, 55-59 años. Los datos muestran valores que oscilan desde los 31 kg en los hombres más jóvenes con DI hasta los 13.3 kg del grupo más maduro de mujeres. Estos hallazgos son similares a los valores de referencia de población con DI española. Sin embargo, son muy inferiores a los obtenidos por la población sin discapacidad de la misma edad. Conclusión. Los resultados evidencian el menor rendimiento de las personas con DI en pruebas de fuerza de prensión manual por lo que se hace evidente la necesidad de llevar a cabo programas de ejercicio físico o deporte con las personas con DI.

  15. Experiencias de haber crecido con un padre/madre con trastorno mental severo (TMS)

    OpenAIRE

    Vivanco B, Gabriela; Grandón F, Pamela

    2016-01-01

    Introducción. La experiencia de vivir con personas que presentan un Trastorno Mental Severo (TMS) es difícil para las familias, en especial para los hijos quienes han sido poco estudiados. El objetivo de la investigación fue conocer cómo la experiencia de haber vivido con un padre o madre con un trastorno mental severo influyó en la infancia, adolescencia y adultez joven de sus hijos e hijas. Método. Se analizan las experiencias de convivencia con un padre/madre con TMS en 10 hijos (6 hombres...

  16. Workplace flexibility: from research to action.

    Science.gov (United States)

    Galinsky, Ellen; Sakai, Kelly; Wigton, Tyler

    2011-01-01

    Ellen Galinsky, Kelly Sakai, and Tyler Wigton explore the "time famine" among American workers-the continuing sense among employees of not having enough time to manage the multiple responsibilities of work and personal and family life. Noting that large shares of U.S. employees report feeling the need for greater workplace flexibility to enable them to take better care of family responsibilities, the authors examine a large-scale community-engagement initiative to increase workplace flexibility voluntarily. Using the 2008 National Study of the Changing Workforce as a primary source of data, the authors begin with an overview of the prevalence of flexibility in today's American workplace. They track which categories of employees have access to various flexibility options, as well as the extent to which employees with access to various types of flexibility use those options. Findings from the study indicate that the majority of employees want flexibility but that access to it varies, with more advantaged employees--those who are well educated, have high salaries, and work full time, for example--being doubly advantaged in having greater access to flexibility. A number of employers, say the authors, tend to be skeptical of the value of workplace flexibility and to fear that employees will abuse it if it is offered. But the study data reveal that most employees use flexibility quite conservatively. When the authors use their nationally representative data set to investigate correlations between access to workplace flexibility and a range of workplace outcomes especially valued by employers--employee engagement, job satisfaction, retention, and health--they find that employers as well as employees can benefit from flexibility. Finally, the authors discuss When Work Works, a large, national community-based initiative under way since 2003 to increase voluntary adoption of workplace flexibility. The authors detail the conceptual basis of the project's design, noting its

  17. Inter-vertebral flexibility of the ostrich neck: implications for estimating sauropod neck flexibility.

    Science.gov (United States)

    Cobley, Matthew J; Rayfield, Emily J; Barrett, Paul M

    2013-01-01

    The flexibility and posture of the neck in sauropod dinosaurs has long been contentious. Improved constraints on sauropod neck function will have major implications for what we know of their foraging strategies, ecology and overall biology. Several hypotheses have been proposed, based primarily on osteological data, suggesting different degrees of neck flexibility. This study attempts to assess the effects of reconstructed soft tissues on sauropod neck flexibility through systematic removal of muscle groups and measures of flexibility of the neck in a living analogue, the ostrich (Struthio camelus). The possible effect of cartilage on flexibility is also examined, as this was previously overlooked in osteological estimates of sauropod neck function. These comparisons show that soft tissues are likely to have limited the flexibility of the neck beyond the limits suggested by osteology alone. In addition, the inferred presence of cartilage, and varying the inter-vertebral spacing within the synovial capsule, also affect neck flexibility. One hypothesis proposed that flexibility is constrained by requiring a minimum overlap between successive zygapophyses equivalent to 50% of zygapophyseal articular surface length (ONP50). This assumption is tested by comparing the maximum flexibility of the articulated cervical column in ONP50 and the flexibility of the complete neck with all tissues intact. It is found that this model does not adequately convey the pattern of flexibility in the ostrich neck, suggesting that the ONP50 model may not be useful in determining neck function if considered in isolation from myological and other soft tissue data.

  18. Inter-vertebral flexibility of the ostrich neck: implications for estimating sauropod neck flexibility.

    Directory of Open Access Journals (Sweden)

    Matthew J Cobley

    Full Text Available The flexibility and posture of the neck in sauropod dinosaurs has long been contentious. Improved constraints on sauropod neck function will have major implications for what we know of their foraging strategies, ecology and overall biology. Several hypotheses have been proposed, based primarily on osteological data, suggesting different degrees of neck flexibility. This study attempts to assess the effects of reconstructed soft tissues on sauropod neck flexibility through systematic removal of muscle groups and measures of flexibility of the neck in a living analogue, the ostrich (Struthio camelus. The possible effect of cartilage on flexibility is also examined, as this was previously overlooked in osteological estimates of sauropod neck function. These comparisons show that soft tissues are likely to have limited the flexibility of the neck beyond the limits suggested by osteology alone. In addition, the inferred presence of cartilage, and varying the inter-vertebral spacing within the synovial capsule, also affect neck flexibility. One hypothesis proposed that flexibility is constrained by requiring a minimum overlap between successive zygapophyses equivalent to 50% of zygapophyseal articular surface length (ONP50. This assumption is tested by comparing the maximum flexibility of the articulated cervical column in ONP50 and the flexibility of the complete neck with all tissues intact. It is found that this model does not adequately convey the pattern of flexibility in the ostrich neck, suggesting that the ONP50 model may not be useful in determining neck function if considered in isolation from myological and other soft tissue data.

  19. Flexible time domain averaging technique

    Science.gov (United States)

    Zhao, Ming; Lin, Jing; Lei, Yaguo; Wang, Xiufeng

    2013-09-01

    Time domain averaging(TDA) is essentially a comb filter, it cannot extract the specified harmonics which may be caused by some faults, such as gear eccentric. Meanwhile, TDA always suffers from period cutting error(PCE) to different extent. Several improved TDA methods have been proposed, however they cannot completely eliminate the waveform reconstruction error caused by PCE. In order to overcome the shortcomings of conventional methods, a flexible time domain averaging(FTDA) technique is established, which adapts to the analyzed signal through adjusting each harmonic of the comb filter. In this technique, the explicit form of FTDA is first constructed by frequency domain sampling. Subsequently, chirp Z-transform(CZT) is employed in the algorithm of FTDA, which can improve the calculating efficiency significantly. Since the signal is reconstructed in the continuous time domain, there is no PCE in the FTDA. To validate the effectiveness of FTDA in the signal de-noising, interpolation and harmonic reconstruction, a simulated multi-components periodic signal that corrupted by noise is processed by FTDA. The simulation results show that the FTDA is capable of recovering the periodic components from the background noise effectively. Moreover, it can improve the signal-to-noise ratio by 7.9 dB compared with conventional ones. Experiments are also carried out on gearbox test rigs with chipped tooth and eccentricity gear, respectively. It is shown that the FTDA can identify the direction and severity of the eccentricity gear, and further enhances the amplitudes of impulses by 35%. The proposed technique not only solves the problem of PCE, but also provides a useful tool for the fault symptom extraction of rotating machinery.

  20. 49 CFR 178.940 - Standards for flexible Large Packagings.

    Science.gov (United States)

    2010-10-01

    .... Flexible Large Packagings types are designated: (1) 51H flexible plastics. (2) 51M flexible paper. (b... this subchapter, flexible Large Packaging must be resistant to aging and degradation caused by ultraviolet radiation. (5) For plastic flexible Large Packagings, if necessary, protection against ultraviolet...

  1. Graphene-cellulose paper flexible supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Weng, Zhe; Su, Yang; Li, Feng; Du, Jinhong; Cheng, Hui-Ming [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Wang, Da-Wei [ARC Centre of Excellence for Functional Nanomaterials, Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, St Lucia, Brisbane, Qld 4072 (Australia)

    2011-10-15

    A simple and scalable method to fabricate graphene-cellulose paper (GCP) membranes is reported; these membranes exhibit great advantages as freestanding and binder-free electrodes for flexible supercapacitors. The GCP electrode consists of a unique three-dimensional interwoven structure of graphene nanosheets and cellulose fibers and has excellent mechanical flexibility, good specific capacitance and power performance, and excellent cyclic stability. The electrical conductivity of the GCP membrane shows high stability with a decrease of only 6% after being bent 1000 times. This flexible GCP electrode has a high capacitance per geometric area of 81 mF cm{sup -2}, which is equivalent to a gravimetric capacitance of 120 F g{sup -1} of graphene, and retains >99% capacitance over 5000 cycles. Several types of flexible GCP-based polymer supercapacitors with various architectures are assembled to meet the power-energy requirements of typical flexible or printable electronics. Under highly flexible conditions, the supercapacitors show a high capacitance per geometric area of 46 mF cm{sup -2} for the complete devices. All the results demonstrate that polymer supercapacitors made using GCP membranes are versatile and may be used for flexible and portable micropower devices. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  2. ESF [Exploratory Shaft Facility] flexibility analysis

    International Nuclear Information System (INIS)

    Brusenback, R.W.

    1987-03-01

    This report directs that uncertainty allowances be included within the ESF facilities. The recommendations herein developed are intended as input to Title II Design criteria. Flexibility is measured first by lineal ft of drift, and then by hoisting rate and capacity of supporting utilities and services. A defined probability of need shows an extra 10,000 ft of drift for the first level of flexibility responding to testing and operations, and over 60,000 ft of drift for the second level of flexibility which recognizes possible need for perimeter drifting to investigate geologic stratigraphy. Observing there will be time constraints, a single shaft muck hoisting rate up to 170 to 250 tons per hour is recommended. The potential hoisting rate recommended for flexibility should be satisfied by a hoist approximately equivalent to, or conveniently upgraded from those being considered for sinking and construction, or 1000 horsepower. The cost of flexibility is limited to engineering planning and design (mostly conceptual) which makes later expansion achievable, and to selected items for initial construction where later upgrading would be impractical, impossible, or very costly. The cost is fixed to the level of flexibility and does not vary with excavated footage. The incremental margin is only a small fraction of the additional footage made available. Flexibility presents a strategy and not a position of design or technology. Examples used in this report are intended to be illustrative only, and not to lead design or cost estimates. 7 tabs

  3. Factors impeding flexible inpatient unit design.

    Science.gov (United States)

    Pati, Debajyoti; Evans, Jennie; Harvey, Thomas E; Bazuin, Doug

    2012-01-01

    To identify and examine factors extraneous to the design decision-making process that could impede the optimization of flexibility on inpatient units. A 2006 empirical study to identify domains of design decisions that affect flexibility on inpatient units found some indication in the context of the acuity-adaptable operational model that factors extraneous to the design process could have negatively influenced the successful implementation of the model. This raised questions regarding extraneous factors that might influence the successful optimization of flexibility. An exploratory, qualitative method was adopted to examine the question. Stakeholders from five recently built acute care inpatient units participated in the study, which involved three types of data collection: (1) verbal protocol data from a gaming session; (2) in-depth semi-structured interviews; and (3) shadowing frontline personnel. Data collection was conducted between June 2009 and November 2010. The study revealed at least nine factors extraneous to the design process that have the potential to hinder the optimization of flexibility in four domains: (1) systemic; (2) cultural; (3) human; and (4) financial. Flexibility is critical to hospital operations in the new healthcare climate, where cost reduction constitutes a vital target. From this perspective, flexibility and efficiency strategies can be influenced by (1) return on investment, (2) communication, (3) culture change, and (4) problem definition. Extraneous factors identified in this study could also affect flexibility in other care settings; therefore, these findings may be viewed from the overall context of hospital design.

  4. HACIA UN CURRÍCULO FLEXIBLE: SALIDAS INTERMEDIAS Y CURSOS OPTATIVOS

    Directory of Open Access Journals (Sweden)

    Carlos Ortigoza Garcell

    2013-04-01

    Full Text Available Tradicionalmente los currículos de las carreras universitarias se han caracterizado por el predominio de una formación de tipo terminal con una sola salida al mercado laboral. Con el fin de contribuir de manera flexible desde la Formación Laboral y Profesional a que los estudiantes definan su trayectoria formativa, en este trabajo se analizan las ventajas de las salidas intermedias en una carrera universitaria, sin afectar la continuidad de los estudios superiores ni la calidad en la formación del egresado universitario. Estas permiten a los estudiantes obtener un título de nivel medio que los pone en condiciones de salir al mercado laboral con un perfil ocupacional relacionado con la carrera universitaria que estudia. Desde la perspectiva curricular la propuesta realizada se basa en currículos flexibles con salidas intermedias donde pueden ser de gran utilidad los cursos optativos y/o electivos.PALABRAS CLAVE: currículo; salidas intermedias; asignaturas optativasTOWARDS A FLEXIBLE CURRICULUM: INTERMEDIATE EXITS AND OPTIONAL COURSES ABSTRACTTraditionally, the curricula of the university degree courses have been focused on the formation of professionals within the required period for their graduation (5-6 years, with a single exit to the labour market. This research is aimed at contributing, from the Labour and Professional Formation of the students, to the definition of their formative process, according to their needs and interests. This paper also analyses the advantages of the intermediate exits in a university degree course, and how they allow students to obtain a college degree without affecting the continuation of the higher education studies or the quality of the formation of the university graduate. Such reality favours the insertion of the students in the labour market under conditions that suit the qualifications and experience related to the degree they are doing. From the curricular perspective, the proposal is based on

  5. El maltrato en las personas con discapacidad

    OpenAIRE

    Revuelta, Lucerga

    2014-01-01

    El maltrato no solo se realiza por acción sino también por omisión, la indiferencia hacia la persona con discapacidad es una forma de maltrato muy frecuente. Por ejemplo, ignorar y desatender las necesidades de la persona con discapacidad o, al contrario, la sobreprotección son maneras de maltrato. Cuando a un niño con discapacidad el padre o cuidador le hace todo, el niño se siente agredido pues le están incapacitando más de lo que su enfermedad ya lo hace.

  6. Hiperalgesia asociada al tratamiento con opioides

    OpenAIRE

    A. Gil Martín; M. Moreno García; J. Sánchez-Rubio Ferrández; T. Molina García

    2014-01-01

    La hiperalgesia inducida por opioides es una reacción paradójica caracterizada por una percepción intensificada de dolor relacionada con el uso de estos medicamentos en ausencia de progresión de la enfermedad o de síndrome de retirada. A diferencia de los casos de tolerancia, definida como pérdida de potencia analgésica durante el uso prolongado de opioides, no se produce mejoría con el escalado de dosis. La hiperalgesia inducida por opioides se ha manifestado en pacientes con dosis de manten...

  7. Tratamiento conservador en pacientes con retinoblastoma bilateral

    Directory of Open Access Journals (Sweden)

    Juan C. Suárez

    2008-11-01

    Full Text Available OBJETIVO: comparar el tratamiento convencional del retinoblastoma bilateral, usado hasta hace algunos años, consistente en radioterapia o enucleación bilateral, con el tratamiento conservador actual que incluye termoterapia transpupilar (TTT o TTT/quimioterapia al menos en un ojo, en niños con diagnóstico de retinoblastoma bilateral. DISEÑO: estudio retrospectivo descriptivo. MUESTRA: 20 pacientes con diagnóstico de retinoblastoma bilateral que consultaron al Hospital Universitario San Vicente de Paúl, de Medellín, Colombia, entre 1997 y 2007. MÉTODO: se hizo enucleación del ojo con el tumor de mayor tamaño. En el otro ojo se hizo tratamiento con TTT, con el láser diodo (810 nm, spot amplio, solo o combinado con otras terapias. RESULTADOS: se dividió a los pacientes en dos grupos: 16 pacientes (32 ojos en el grupo 1 tratados conservadoramente y 4 pacientes (8 ojos en el grupo 2 con tratamiento convencional. El rango de edad fue de 1-72 meses en el grupo 1 y de 1-12 meses en el grupo 2. El tiempo de seguimiento fue de 7-67 meses para el grupo 1 y de 13-73 meses para el grupo 2. En el grupo 1 se hizo enucleación de 16 ojos (50%, radioterapia externa de uno (3,1%, quimioterapia más termoterapia de 5 (15,6% y quimioterapia más termoterapia más crioterapia de 10 (31,3%. En todos los pacientes se logró preservar al menos un ojo. En el grupo 2, se enuclearon 7 ojos (87,5% y se hizo radioterapia externa más enucleación en un paciente (12.5%. Además, todos los pacientes recibieron quimioterapia. CONCLUSIÓN: la terapia conservadora actual consistente en tratamiento local (termoterapia, crioterapia o braquiterapia y quimiorreducción permite preservar al menos un ojo y en algunos casos de los dos, muchas veces con buena agudeza visual, en niños con retinoblastoma bilateral; se evitan así la enucleación bilateral y la radioterapia externa usada en el tratamiento convencional con todos sus efectos secundarios. La enucleación contin

  8. Paciente con tumor de cuerpo carotideo

    Directory of Open Access Journals (Sweden)

    Mariuska Forteza Sáez

    Full Text Available Los tumores de cuerpo carotideo (paragangliomas son neoplasias altamente vascularizadas, muy poco frecuentes y generalmente benignas, originadas en los quimiorreceptores del cuerpo carotideo. Se presenta el caso de un paciente de 54 años, con aumento de volumen cervical derecho, asintomático, con estudio preoperatorio y angiografía realizados por tomografía axial computarizada, que resultan compatibles con tumor de cuerpo carotideo. Se realiza disección subadventicial, informando la biopsia paraganglioma. El tumor fue completamente resecado, sin evidencia de recurrencia y sin complicaciones.

  9. Flexible removable partial dentures: a basic overview.

    Science.gov (United States)

    Hill, Edward E; Rubel, Barry; Smith, John B

    2014-01-01

    For many years, flexible resin materials have been available for fabricating removable partial denture (RPD) prostheses. Using a nonrigid material for the major connector or other components of an RPD may be a consideration for certain patients. Except for the promotional literature that has been written for flexible resin dentures, there is very little information available in the dental literature concerning nonrigid RPDs. As a result, the decision to use this treatment option depends on the judgment and experience of the dentist and fabricating laboratory. This article summarizes clinically pertinent information about flexible, nonrigid partial dentures.

  10. Optimal reduction of flexible dynamic system

    International Nuclear Information System (INIS)

    Jankovic, J.

    1994-01-01

    Dynamic system reduction is basic procedure in various problems of active control synthesis of flexible structures. In this paper is presented direct method for system reduction by explicit extraction of modes included in reduced model form. Criterion for optimal system discrete approximation in synthesis reduced dynamic model is also presented. Subjected method of system decomposition is discussed in relation to the Schur method of solving matrix algebraic Riccati equation as condition for system reduction. By using exposed method procedure of flexible system reduction in addition with corresponding example is presented. Shown procedure is powerful in problems of active control synthesis of flexible system vibrations

  11. Evaluation of the flexibility of protective gloves.

    Science.gov (United States)

    Harrabi, Lotfi; Dolez, Patricia I; Vu-Khanh, Toan; Lara, Jaime

    2008-01-01

    Two mechanical methods have been developed for the characterization of the flexibility of protective gloves, a key factor affecting their degree of usefulness for workers. The principle of the first method is similar to the ASTM D 4032 standard relative to fabric stiffness and simulates the deformations encountered by gloves that are not tight fitted to the hand. The second method characterizes the flexibility of gloves that are worn tight fitted. Its validity was theoretically verified for elastomer materials. Both methods should prove themselves as valuable tools for protective glove manufacturers, allowing for the characterization of their existing products in terms of flexibility and the development of new ones better fitting workers' needs.

  12. Flexibility: the grid knows how to cope

    International Nuclear Information System (INIS)

    Boulanger, Vincent

    2017-01-01

    As variable energy sources, such as wind power and photovoltaic solar power, are more and more penetrating into the electric power mix, flexibility is therefore a growing challenge, notably concerning the power demand variability. As a matter of fact, experts show that, contrary to the popular belief, there is no needs to use thermal power plants, power-to-gas systems or energy storage for that, thanks to innovative power flexibility and load management tools and technologies (nuclear power plants are also gaining the aptitude to be more flexible than before). The frequency issue is addressed

  13. Probabilistic Quantification of Potentially Flexible Residential Demand

    DEFF Research Database (Denmark)

    Kouzelis, Konstantinos; Mendaza, Iker Diaz de Cerio; Bak-Jensen, Birgitte

    2014-01-01

    The balancing of power systems with high penetration of renewable energy is a serious challenge to be faced in the near future. One of the possible solutions, recently capturing a lot of attention, is demand response. Demand response can only be achieved by power consumers holding loads which allow...... them to modify their normal power consumption pattern, namely flexible consumers. However flexibility, despite being constantly mentioned, is usually not properly defined and even rarer quantified. This manuscript introduces a methodology to identify and quantify potentially flexible demand...

  14. Diseño del programa de control para una celda de manufactura flexible didáctica

    Directory of Open Access Journals (Sweden)

    Luis Diego Murillo-Soto

    2014-09-01

    El presente trabajo describe la interpretación de la teoría ABM con la finalidad de implementarla en un PLC comercial. El programa de control diseñado se probó con tres políticas de producción, en una celda de manufactura flexible multireentrante (MRF ubicada en el Instituto Tecnológico de Costa Rica; el objeto de las pruebas fue observar el rendimiento de la celda de manufactura ante distintas políticas de despacho en la producción.

  15. Flexible structured high-frequency film bulk acoustic resonator for flexible wireless electronics

    International Nuclear Information System (INIS)

    Zhou, Changjian; Shu, Yi; Yang, Yi; Ren, Tian-Ling; Jin, Hao; Dong, Shu-Rong; Chan, Mansun

    2015-01-01

    Flexible electronics have inspired many novel and very important applications in recent years and various flexible electronic devices such as diodes, transistors, circuits, sensors, and radiofrequency (RF) passive devices including antennas and inductors have been reported. However, the lack of a high-performance RF resonator is one of the key bottlenecks to implement flexible wireless electronics. In this study, for the first time, a novel ultra-flexible structured film bulk acoustic resonator (FBAR) is proposed. The flexible FBAR is fabricated on a flexible polyimide substrate using piezoelectric thin film aluminum nitride (AlN) for acoustic wave excitation. Both the shear wave and longitudinal wave can be excited under the surface interdigital electrodes configuration we proposed. In the case of the thickness extension mode, a flexible resonator with a working frequency as high as of 5.2325 GHz has been realized. The resonators stay fully functional under bending status and after repeated bending and re-flattening operations. This flexible high-frequency resonator will serve as a key building block for the future flexible wireless electronics, greatly expanding the application scope of flexible electronics. (paper)

  16. Free-form Flexible Lithium-Ion Microbattery

    KAUST Repository

    Kutbee, Arwa T.; Ghoneim, Mohamed T.; Ahmed, Sally; Hussain, Muhammad Mustafa

    2016-01-01

    Wearable electronics need miniaturized, safe and flexible power sources. Lithium ion battery is a strong candidate as high performance flexible battery. The development of flexible materials for battery electrodes suffers from the limited material

  17. Flexible lithium-ion planer thin-film battery

    KAUST Repository

    Kutbee, Arwa T.; Ghoneim, Mohamed T.; Hussain, Muhammad Mustafa

    2016-01-01

    Commercialization of wearable electronics requires miniaturized, flexible power sources. Lithium ion battery is a strong candidate as the next generation high performance flexible battery. The development of flexible materials for battery electrodes

  18. Presa con revestimiento asfáltico

    Directory of Open Access Journals (Sweden)

    Proudfit, D. P.

    1960-07-01

    Full Text Available La presa denominada Montgomery se halla situada sobre el río South Platte River, a unos 8 km aguas arriba de la ciudad de Alma, del Estado de Colorado (EE. UU., y en la ladera oriental de la cordillera Continental Divide. El cuerpo o dique de esta presa está constituido por piedra, revestida con una capa de hormigón asfáltico en el paramento de contacto con el agua.

  19. Trastornos temporomandibulares en pacientes con maloclusiones

    Directory of Open Access Journals (Sweden)

    Luis Soto Cantero

    Full Text Available Introducción: existe una prevalencia de trastornos oclusales en gran medida relacionados con la presencia de disfunción temporomandibular. Objetivo: determinar el grado de disfunción temporomandibular según el Índice de Maglione en correspondencia con la prevalencia de maloclusiones en el área de salud del policlínico "Turcios Lima". Métodos: se realizó un estudio observacional descriptivo, de corte transversal, en la consulta de ortodoncia, de junio del 2008 a junio del 2009. De un universo constituido por los 280 pacientes que acudieron al servicio de ortodoncia en el período señalado con presencia de maloclusiones, se seleccionó una muestra de 84 pacientes por muestreo aleatorio simple, teniendo en cuenta los criterios de inclusión y exclusión realizados por criterios de expertos. Resultados: presentaban disfunción temporomandibular 74 pacientes y dentro de ellos 44 (52,4 % tenían disfunción grado II (Moderada. El 97 % de los pacientes con relación molar de clase II, presentaban disfunción temporomandibular. El 42,9 % de los pacientes con una maloclusión, presentaban disfunción grado I. El 60 % de los pacientes con dos maloclusiones presentaban disfunción grado II y el 66,7 % de los pacientes con tres maloclusiones, presentaban disfunción grado III. La mayor cantidad de pacientes tuvieron disfunción grado II (Moderada. Conclusiones: el mayor por ciento de los pacientes con disfunciones presentó una clase II molar y a medida que aumentó el número de maloclusiones aumentó también la severidad de la disfunción.

  20. Flexible public transportation services in Florida.

    Science.gov (United States)

    2013-08-01

    This synthesis research provides an overview of the current use of flexible transportation services in Florida through administration of a survey and subsequent identification and examination of case study locations. The research included a literatur...

  1. Thin Flexible IMM Solar Array, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Thin, flexible, and highly efficient solar arrays are needed that package compactly for launch and deploy into large, structurally stable high power generators....

  2. Cognitive flexibility in drawings of bilingual children.

    Science.gov (United States)

    Adi-Japha, Esther; Berberich-Artzi, Jennie; Libnawi, Afaf

    2010-01-01

    A. Karmiloff-Smith's (1990) task of drawing a nonexistent object is considered to be a measure of cognitive flexibility. The notion of earlier emergence of cognitive flexibility in bilingual children motivated the current researchers to request 4- and 5-year-old English-Hebrew and Arabic-Hebrew bilingual children and their monolingual peers to draw a flower and a house that do not exist (N=80). Bilinguals exhibited a significantly higher rate of interrepresentational flexibility in their drawings (e.g., "a giraffe flower,"a chair-house," found in 28 of 54 drawings), whereas the level of complex intrarepresentational change was similar across groups. Interrepresentational drawings were previously reported only for children older than 7 years. The specific mechanisms by which bilinguals' language experience may lead to interrepresentational flexibility are discussed. © 2010 The Authors. Child Development © 2010 Society for Research in Child Development, Inc.

  3. Two dimensional nanomaterials for flexible supercapacitors.

    Science.gov (United States)

    Peng, Xu; Peng, Lele; Wu, Changzheng; Xie, Yi

    2014-05-21

    Flexible supercapacitors, as one of most promising emerging energy storage devices, are of great interest owing to their high power density with great mechanical compliance, making them very suitable as power back-ups for future stretchable electronics. Two-dimensional (2D) nanomaterials, including the quasi-2D graphene and inorganic graphene-like materials (IGMs), have been greatly explored to providing huge potential for the development of flexible supercapacitors with higher electrochemical performance. This review article is devoted to recent progresses in engineering 2D nanomaterials for flexible supercapacitors, which survey the evolution of electrode materials, recent developments in 2D nanomaterials and their hybrid nanostructures with regulated electrical properties, and the new planar configurations of flexible supercapacitors. Furthermore, a brief discussion on future directions, challenges and opportunities in this fascinating area is also provided.

  4. Resonant Electromagnetic Shunt Damping of Flexible Structures

    DEFF Research Database (Denmark)

    Høgsberg, Jan Becker

    2016-01-01

    Electromagnetic transducers convert mechanical energy to electrical energy and vice versa. Effective passive vibration damping of flexible structures can therefore be introduced by shunting with an accurately calibrated resonant electrical network thatcontains a capacitor to create the desired...

  5. Carbon Nanotube Flexible and Stretchable Electronics.

    Science.gov (United States)

    Cai, Le; Wang, Chuan

    2015-12-01

    The low-cost and large-area manufacturing of flexible and stretchable electronics using printing processes could radically change people's perspectives on electronics and substantially expand the spectrum of potential applications. Examples range from personalized wearable electronics to large-area smart wallpapers and from interactive bio-inspired robots to implantable health/medical apparatus. Owing to its one-dimensional structure and superior electrical property, carbon nanotube is one of the most promising material platforms for flexible and stretchable electronics. Here in this paper, we review the recent progress in this field. Applications of single-wall carbon nanotube networks as channel semiconductor in flexible thin-film transistors and integrated circuits, as stretchable conductors in various sensors, and as channel material in stretchable transistors will be discussed. Lastly, state-of-the-art advancement on printing process, which is ideal for large-scale fabrication of flexible and stretchable electronics, will also be reviewed in detail.

  6. Flexibility-enabling Contracts in Electricity Markets

    DEFF Research Database (Denmark)

    Boscan, Luis; Poudineh, Rahmatallah

    As the share of intermittent renewable energy increases in the generation mix, power systems are exposed to greater levels of uncertainty and risk, which requires planners, policy and business decision makers to incentivise flexibility, that is: their adaptability to unforeseen variations....... Additionally, along with traditional sources, which already enable flexibility, a number of business models, such as thermostat-based demand response, aggregators and small storage providers, are emerging in electricity markets and expected to constitute important sources of flexibility in future decentralised...... power systems. However, due to presence of high transaction costs, relative to the size of resource, the emerging small resources cannot directly participate in an organised electricity market and/or compete. This paper asks the fundamental question of how should the provision of flexibility, as a multi...

  7. Alternative methods of flexible base compaction acceptance.

    Science.gov (United States)

    2012-11-01

    "This report presents the results from the second year of research work investigating issues with flexible base acceptance testing within the Texas Department of Transportation. This second year of work focused on shadow testing non-density-based acc...

  8. Thin Flexible IMM Solar Array, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Inverted Metamorphic (IMM) solar cells have achieved high efficiency at very low mass, but integration of the thin crystalline photovoltaic device into a flexible...

  9. Flexible HVAC System for Lab or Classroom.

    Science.gov (United States)

    Friedan, Jonathan

    2001-01-01

    Discusses an effort to design a heating, ventilation, and air conditioning system flexible enough to accommodate an easy conversion of classrooms to laboratories and dry labs to wet labs. The design's energy efficiency and operations and maintenance are examined. (GR)

  10. Sources of Operational Flexibility, Greening the Grid

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Jessica; Milligan, Michael; Cochran, Jaquelin

    2015-05-01

    Changes in electricity demand and generation must be constantly balanced to maintain power system stability and reliability. Operational flexibility refers to the ability of a power system to respond to these changes. Power systems are designed and operated to efficiently manage variability and uncertainty in electricity demand and resource availability. Variable renewable energy (VRE) increases this inherent variability and uncertainty, and thus increases the need for flexibility. Systems with significant variability and uncertainty require flexible generators that can rapidly change output, operate efficiently at lower outputs, and operate for short durations. This flexibility in turn can reduce the need to curtail (decrease the output of) solar and wind generation; improve investor confidence in VRE and revenue streams; decrease the risk of negative market pricing (which results when conventional generators cannot turn down to low outputs during times of high VRE output); and reduce environmental impacts by increasing system efficiency and maximizing the utilization of VRE.

  11. Mixture design procedure for flexible base.

    Science.gov (United States)

    2013-04-01

    This document provides information on mixture design requirements for a flexible base course. Sections : design requirements, job mix formula, contractor's responsibility, and engineer's responsibility. Tables : material requirements; requirements fo...

  12. Receptiveness to Flexible Employment at Hungarian SMEs

    Directory of Open Access Journals (Sweden)

    Ákos Essősy

    2018-04-01

    Full Text Available Nowadays, only companies that are adaptable and flexible in their structure and processes can survive. The basis for a motivated company aiming for peak performance is organisational innovation. Hungary is one of the less innovative countries in Europe. Only organisations that can integrate new solutions smoothly into their everyday operations will remain truly competitive. The Government of Hungary, in its Partnership Agreement with the European Union, set out the goals for improving and supporting the adaptability of enterprises, the promotion of flexible and family-friendly workplace practices and services, and the employment of women with young children. The aim of this study is to demonstrate, through a Hungarian example, the receptiveness of Hungarian small and medium-sized enterprises to flexible forms of employment. The effect of flexible employment on economic adaptability and competitiveness through workforce efficiency and retention is examined. Its aim is the raise the awareness of options to increase employment among Hungarian SME managers.

  13. RadCon: A Radiological Consequences Model

    International Nuclear Information System (INIS)

    Crawford, J.; Domel, R.U.

    2000-05-01

    RadCon estimates the dose received by user selected groups in the population from an accidental release of radionuclides to the environment. The exposure pathways considered are external exposure from the cloud and ground and internal exposure from inhalation and ingestion of contaminated food. Atmospheric dispersion modelling is carried out externally to RadCon.Given a two dimensional time varying air and ground concentration of radioactive elements, RadCon allows the user to: view the air and ground concentration over the affected area, select optional parameters and calculate the dose to people,display the results to the user, and change the parameter values. RadCon offers two user interfaces: 1) the standard graphical user interface which is started using Java DoseApp at the command line, or by setting up a shortcut to this command (particularly when RadCon is installed on a PC) and 2) the text based interface used to generate information for the model inter-comparison exercise . This is initiated using Java BIOMASS at the command line, or an equivalent shortcut. The text based interface was developed for research purposes and is not generally available. Appendices A, B and C provide a summary of instructions on setting up RadCon. This will generally be carried out by the computer support personnel

  14. Adolescente femenino con granulomatosis de Wegener fulminante

    Directory of Open Access Journals (Sweden)

    S C Scheffler-Mendoza

    2017-01-01

    Full Text Available Adolescente femenino de 13 años de edad, originaria de Guerrero, grupo étnico mixteco, padres analfabetos y con poco entendimiento del español. Sin otros antecedentes de importancia para el padecimiento. Inició un mes previo con la aparición de una pápula hipercrómica en párpado superior derecho que en los 10 días previos al ingreso aumentó de volumen generando proptosis. Al interrogatorio se negó dolor, lagrimeo, fiebre, o pérdida de peso. Ingresó con fiebre (39.0°C, palidez generalizada, proptosis derecha con exposición de córnea y conjuntiva, eritema periorbitario, movimientos oculares y agudeza visual disminuidos (i.e. contaba dedos a 1 m, pupila con tendencia a midriasis, hiperreactividad a la luz, y fondo de ojo con papila hiperémica edematosa y tortuosidad peripapilar. El resto de exploración no mostró datos relevantes. Se hospitalizó para iniciar tratamiento antimicrobiano parenteral de amplio espectro (i.e. ceftriaxona y vancomicina y abordar proptosis unilateral.

  15. Flexible receiver adapter formal design review

    International Nuclear Information System (INIS)

    Krieg, S.A.

    1995-01-01

    This memo summarizes the results of the Formal (90%) Design Review process and meetings held to evaluate the design of the Flexible Receiver Adapters, support platforms, and associated equipment. The equipment is part of the Flexible Receiver System used to remove, transport, and store long length contaminated equipment and components from both the double and single-shell underground storage tanks at the 200 area tank farms

  16. Flexible and Cellulose-based Organic Electronics

    OpenAIRE

    Edberg, Jesper

    2017-01-01

    Organic electronics is the study of organic materials with electronic functionality and the applications of such materials. In the 1970s, the discovery that polymers can be made electrically conductive led to an explosion within this field which has continued to grow year by year. One of the attractive features of organic electronic materials is their inherent mechanical flexibility, which has led to the development of numerous flexible electronics technologies such as organic light emitting ...

  17. Flexible Dermal Armor : Designs Learned from Nature

    OpenAIRE

    Chen, Irene Hsu

    2015-01-01

    Designs derived from nature have become a perfect blueprint for today's engineers and scientists to follow and implement. One particularly noted area is the defense industry, wherein flexible dermal armor inspired by nature has been pioneering many sophisticated technologies and designs in recent years. Designers today are considering borrowing aspects of flexibility and mobility of natural dermal armors to enhance the maneuverability of man-made armor by imitating the following mechanisms : ...

  18. RT-18: Value of Flexibility. Phase 1

    Science.gov (United States)

    2010-09-25

    following examples of putative flexibility:  ― Nike shoes provide flexibility to the customer in terms of color choice, customized emblems (such...investment opportunity, he constructs a synthetic portfolio of a brand -new factory in a developing country, such as China, and bonds. Maybe the...kit using a combination of Inertial Navigation (INS) and the satellite based Global Positioning System (GPS). These Joint Direct Attack Munition

  19. Technical Design of Flexible Sustainable Energy Systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    The paper presents technical designs of potential future flexible energy systems in Denmark, which will be able both to balance production and demand and to secure voltage and frequency requirements on the grid.......The paper presents technical designs of potential future flexible energy systems in Denmark, which will be able both to balance production and demand and to secure voltage and frequency requirements on the grid....

  20. Flexible benefits plans. Perceptions of their effectiveness.

    Science.gov (United States)

    Agho, A O

    1995-01-01

    Flexible benefits plans have been used in businesses since the 1970s to control healthcare costs and meet the needs of an increasingly diverse work force. More recently, healthcare organizations have begun to implement the flexible benefits concept. This study collected data from human resources executives at hospitals with and without flex plans to investigate how they perceive the effectiveness of and the problems associated with such plans.

  1. Access to flexible working and informal care

    OpenAIRE

    Bryan, Mark L.

    2011-01-01

    We use matched employer-employee data to explore the relationship between employees' access to flexible working arrangements and the amount of informal care they provide to sick or elderly friends and relatives. Flexitime and the ability to reduce working hours are each associated with about 10% more hours of informal care, with effects concentrated among full-time workers providing small amounts of care. The wider workplace environment beyond formal flexible work also appears to facilitate c...

  2. Functional flexibility in wild bonobo vocal behaviour

    Directory of Open Access Journals (Sweden)

    Zanna Clay

    2015-08-01

    Full Text Available A shared principle in the evolution of language and the development of speech is the emergence of functional flexibility, the capacity of vocal signals to express a range of emotional states independently of context and biological function. Functional flexibility has recently been demonstrated in the vocalisations of pre-linguistic human infants, which has been contrasted to the functionally fixed vocal behaviour of non-human primates. Here, we revisited the presumed chasm in functional flexibility between human and non-human primate vocal behaviour, with a study on our closest living primate relatives, the bonobo (Pan paniscus. We found that wild bonobos use a specific call type (the “peep” across a range of contexts that cover the full valence range (positive-neutral-negative in much of their daily activities, including feeding, travel, rest, aggression, alarm, nesting and grooming. Peeps were produced in functionally flexible ways in some contexts, but not others. Crucially, calls did not vary acoustically between neutral and positive contexts, suggesting that recipients take pragmatic information into account to make inferences about call meaning. In comparison, peeps during negative contexts were acoustically distinct. Our data suggest that the capacity for functional flexibility has evolutionary roots that predate the evolution of human speech. We interpret this evidence as an example of an evolutionary early transition away from fixed vocal signalling towards functional flexibility.

  3. Flexible Thermoelectric Generators on Silicon Fabric

    KAUST Repository

    Sevilla, Galo T.

    2012-11-01

    In this work, the development of a Thermoelectric Generator on Flexible Silicon Fabric is explored to extend silicon electronics for flexible platforms. Low cost, easily deployable plastic based flexible electronics are of great interest for smart textile, wearable electronics and many other exciting applications. However, low thermal budget processing and fundamentally limited electron mobility hinders its potential to be competitive with well established and highly developed silicon technology. The use of silicon in flexible electronics involve expensive and abrasive materials and processes. In this work, high performance flexible thermoelectric energy harvesters are demonstrated from low cost bulk silicon (100) wafers. The fabrication of the micro- harvesters was done using existing silicon processes on silicon (100) and then peeled them off from the original substrate leaving it for reuse. Peeled off silicon has 3.6% thickness of bulk silicon reducing the thermal loss significantly and generating nearly 30% more output power than unpeeled harvesters. The demonstrated generic batch processing shows a pragmatic way of peeling off a whole silicon circuitry after conventional fabrication on bulk silicon wafers for extremely deformable high performance integrated electronics. In summary, by using a novel, low cost process, this work has successfully integrated existing and highly developed fabrication techniques to introduce a flexible energy harvester for sustainable applications.

  4. Flexibility evaluation of multiechelon supply chains.

    Directory of Open Access Journals (Sweden)

    João Flávio de Freitas Almeida

    Full Text Available Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

  5. The value of flexibility in power markets

    International Nuclear Information System (INIS)

    Goutte, Stephane; Vassilopoulos, Philippe

    2017-01-01

    In this paper we attempt to quantify the net revenues that can be captured by a flexible resource able to react to the short term price variations on the day-ahead and intra-day markets in Germany. We find that the difference between day-ahead and intra-day revenues for a flexible resource has been increasing (although the profitability has been decreasing on both markets). This difference is more pronounced once 15 mn price variations can be captured by a flexible resource. The net revenues from the local 15 mn auction (which is held 3 hours after the hourly 'coupled' day-ahead auction) are more than eight times higher than the day-ahead hourly auction but below the net revenues that can be captured with the high prices from the continuous market. The results of the backward-looking empirical estimations allow us to distinguish and quantify two components of flexibility: (1) the 'immediacy' value as we are approaching real-time and the urgency of the delivery increases (this value is revealed during the continuous intra-day process and is highly linked to the stochastic nature of power supply and demand (i.e. wind/solar forecasts, forced outages of thermal generation,...) forecast error risk), and (2) the 'flexibility' component as a resource can react to variations of shorter granularity (15 mn Vs 60 mn). We model and quantify the 'flexibility' component. (authors)

  6. Flexibility evaluation of multiechelon supply chains.

    Science.gov (United States)

    Almeida, João Flávio de Freitas; Conceição, Samuel Vieira; Pinto, Luiz Ricardo; de Camargo, Ricardo Saraiva; Júnior, Gilberto de Miranda

    2018-01-01

    Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

  7. Flexible and rigid cystoscopy in women.

    Science.gov (United States)

    Gee, Jason R; Waterman, Bradley J; Jarrard, David F; Hedican, Sean P; Bruskewitz, Reginald C; Nakada, Stephen Y

    2009-01-01

    Previous studies have evaluated the tolerability of rigid versus flexible cystoscopy in men. Similar studies, however, have not been performed in women. We sought to determine whether office-based flexible cystoscopy was better tolerated than rigid cystoscopy in women. Following full IRB approval, women were prospectively randomized in a single-blind manner. Patients were randomized to flexible or rigid cystoscopy and draped in the lithotomy position to maintain blinding of the study. Questionnaires evaluated discomfort before, during, and after cystoscopy. Thirty-six women were randomized to flexible (18) or rigid (18) cystoscopy. Indications were surveillance (16), hematuria (15), recurrent UTIs (2), voiding dysfunction (1), and other (2). All questionnaires were returned by 31/36 women. Using a 10-point visual analog scale (VAS), median discomfort during the procedure for flexible and rigid cystoscopy were 1.4 and 1.8, respectively, in patients perceiving pain. Median recalled pain 1 week later was similar at 0.8 and 1.15, respectively. None of these differences were statistically significant. Flexible and rigid cystoscopy are well tolerated in women. Discomfort during and after the procedure is minimal in both groups. Urologists should perform either procedure in women based on their preference and skill level.

  8. Flexible magnetic thin films and devices

    Science.gov (United States)

    Sheng, Ping; Wang, Baomin; Li, Runwei

    2018-01-01

    Flexible electronic devices are highly attractive for a variety of applications such as flexible circuit boards, solar cells, paper-like displays, and sensitive skin, due to their stretchable, biocompatible, light-weight, portable, and low cost properties. Due to magnetic devices being important parts of electronic devices, it is essential to study the magnetic properties of magnetic thin films and devices fabricated on flexible substrates. In this review, we mainly introduce the recent progress in flexible magnetic thin films and devices, including the study on the stress-dependent magnetic properties of magnetic thin films and devices, and controlling the properties of flexible magnetic films by stress-related multi-fields, and the design and fabrication of flexible magnetic devices. Project supported by the National Key R&D Program of China (No. 2016YFA0201102), the National Natural Science Foundation of China (Nos. 51571208, 51301191, 51525103, 11274321, 11474295, 51401230), the Youth Innovation Promotion Association of the Chinese Academy of Sciences (No. 2016270), the Key Research Program of the Chinese Academy of Sciences (No. KJZD-EW-M05), the Ningbo Major Project for Science and Technology (No. 2014B11011), the Ningbo Science and Technology Innovation Team (No. 2015B11001), and the Ningbo Natural Science Foundation (No. 2015A610110).

  9. Grupos focales de discusión: estrategia para la investigación sobre salud sexual con adolescentes con experiencia de vida en calle en Medellín, Colombia

    Directory of Open Access Journals (Sweden)

    Diana Castro A

    2016-09-01

    Full Text Available La intención de este artículo es evidenciar la importancia de los grupos focales de discusión como estrategia metodológica para la recolección de información en el trabajo con adolescentes institucionalizados con experiencia de vida en calle y, al mismo tiempo, mostrar su valor en el abordaje de la salud sexual con esta población, en tanto que permite una interacción flexible y reflexiva entre investigadores y participantes, así como de los participantes entre sí. El valor de esta estrategia metodológica es sustentado en este artículo mediante testimonios y resultados obtenidos durante su implementación en el estudio llevado a cabo con adolescentes institucionalizados entre 2013 y 2014 en Medellín. Se espera con este reducir las creencias de profesionales con respecto a las limitaciones de la estrategia para abordar temáticas relacionadas con la salud sexual de este grupo poblacional. Los resultados se articulan en cuatro categorías: conocimientos y percepciones sobre vih e its, salud sexual y reproductiva (ssr, el lenguaje en la ssr, y acceso y uso de las tecnologías de la información y la comunicación (tic. De esta manera, se deja de manifiesto el aporte y potencial de la estrategia para el abordaje del tema y para el acercamiento e interacción con adolescentes con experiencia de vida en calle.

  10. Work Life Balance in the Netherlands: Flexible working hours and a flexible working place (Japanese)

    OpenAIRE

    KENJOH Eiko

    2011-01-01

    The purpose of this paper is to investigate the nature of Dutch approach to achieving Work Life Balance (WLB) and to draw policy implications for Japan. It is argued that flexibility of working hours and flexibility offered at one's working place are essential elements of WLB. In this respect, the Netherlands has attained relatively advanced policies and practices. For instance, workers in the Netherlands enjoy a strong degree of flexibility in terms of working hours, a system that strives to...

  11. Inter-Vertebral Flexibility of the Ostrich Neck: Implications for Estimating Sauropod Neck Flexibility

    OpenAIRE

    Cobley, Matthew J.; Rayfield, Emily J.; Barrett, Paul M.

    2013-01-01

    The flexibility and posture of the neck in sauropod dinosaurs has long been contentious. Improved constraints on sauropod neck function will have major implications for what we know of their foraging strategies, ecology and overall biology. Several hypotheses have been proposed, based primarily on osteological data, suggesting different degrees of neck flexibility. This study attempts to assess the effects of reconstructed soft tissues on sauropod neck flexibility through systematic removal o...

  12. The Flexibility of Organization and the flexibility of product – premises of organizational success

    OpenAIRE

    Todorut, Amalia Venera

    2008-01-01

    Flexibility represents the ability of a manufactural system to adapt to some diversified tasks of production, thus to assure an economic efficiency – the rapport time/cost should be optimum, with insignificant structure changes within a long period of time. The central role of flexibility is to permit the survival and the success of the organizations in a turbulent circumstance, which is characteristic to the new world tendencies. The more flexible the organization becomes, the better it resp...

  13. RadConEd: A Graphical Data Editor for the Radiological Consequences Model, RadCon

    International Nuclear Information System (INIS)

    Crawford, J.; Domel, R.U.

    2000-05-01

    This document describes the application, RadConEd, which has been designed and implemented to enable users of the RadCon system to update these parameter files. The RadCon system is written in the Java programming language, and as such provides portability across computer platforms. The software described in this report was developed in line with the portability requirements of RadCon, thus providing a uniform user interface across computer platforms and bypassing the need of using system editors. In addition a number of data integrity measures were implemented

  14. Enfermedad coronaria en pacientes con psoriasis

    Directory of Open Access Journals (Sweden)

    Walter Masson

    2013-10-01

    Full Text Available Comunicaciones previas asociaron la psoriasis con la enfermedad coronaria. Desconocemos si en nuestro país o región existe dicha asociación. Se realizó un estudio transversal analizando los datos de la historia clínica electrónica de un sistema de salud de Buenos Aires. Analizamos todos los pacientes mayores de 18 años con diagnóstico de psoriasis entre el 1 de enero de 2003 y el 31 de julio de 2011 y los comparamos con un grupo control, en una relación 2:1, obtenido en forma aleatoria del mismo sistema de salud, apareados por edad y sexo. Determinamos la prevalencia de los factores de riesgo cardiovascular y de enfermedad coronaria. Analizamos la asociación entre la enfermedad coronaria y la psoriasis mediante análisis uni y multivariado. Se incluyeron 3 833 sujetos (1 286 pacientes con psoriasis y 2 547 controles. La prevalencia de hipertensión arterial (50% vs. 38%, p < 0.001, tabaquismo (25% vs. 17%, p < 0.001, diabetes (12% vs. 8%, p < 0.001 y enfermedad coronaria (4.98% vs. 3.06%, p = 0.003 fue mayor en los sujetos con psoriasis en comparación con el grupo control. Independientemente de la edad, la presencia de diabetes, hipertensión arterial o tabaquismo, hubo una asociación significativa entre la enfermedad coronaria y la psoriasis (OR 1.48, IC95% 1.04-2.11, p = 0.03. En conclusión, en esta población de Buenos Aires, los pacientes con psoriasis tuvieron una mayor prevalencia de diabetes, hipertensión arterial, tabaquismo y enfermedad coronaria. La asociación entre la psoriasis y la enfermedad coronaria fue independiente de los factores de riesgo explorados.

  15. Mincle Signaling Promotes Con-A Hepatitis

    Science.gov (United States)

    Greco, Stephanie H.; Torres-Hernandez, Alejandro; Kalabin, Aleksandr; Whiteman, Clint; Rokosh, Rae; Ravirala, Sushma; Ochi, Atsuo; Gutierrez, Johana; Salyana, Muhammad Atif; Mani, Vishnu R.; Nagaraj, Savitha V.; Deutsch, Michael; Seifert, Lena; Daley, Donnele; Barilla, Rocky; Hundeyin, Mautin; Nikifrov, Yuriy; Tejada, Karla; Gelb, Bruce E.; Katz, Steven C.; Miller, George

    2016-01-01

    Concanavalin-A (Con-A) hepatitis is regarded as a T cell-mediated model of acute liver injury. Mincle is a C-type lectin receptor (CLR) that is critical in the immune response to mycobacteria and fungi, but does not have a well-defined role in pre-clinical models of non-pathogen mediated inflammation. Since Mincle can ligate the cell death ligand SAP130, we postulated that Mincle signaling drives intrahepatic inflammation and liver injury in Con-A hepatitis. Acute liver injury was assessed in the murine Con-A hepatitis model using C57BL/6, Mincle−/−, and Dectin-1−/− mice. The role of C/EBPβ and HIF-1α signaling was assessed using selective inhibitors. We found that Mincle was highly expressed in hepatic innate inflammatory cells and endothelial cells in both mice and humans. Furthermore, sterile Mincle ligands and Mincle signaling intermediates were increased in the murine liver in Con-A hepatitis. Most significantly, Mincle deletion or blockade protected against Con-A hepatitis whereas Mincle ligation exacerbated disease. Bone marrow chimeric and adoptive transfer experiments suggested that Mincle signaling in infiltrating myeloid cells dictates disease phenotype. Conversely, signaling via other CLRs did not alter disease course. Mechanistically, we found that Mincle blockade decreased the NF-κβ related signaling intermediates, C/EBPβ and HIF-1α, both of which are necessary in macrophage-mediated inflammatory responses. Accordingly, Mincle deletion lowered production of nitrites in Con-A hepatitis and inhibition of both C/EBPβ and HIF1-α reduced the severity of liver disease. Our work implicates a novel innate immune driver of Con-A hepatitis and, more broadly, suggests a potential role for Mincle in diseases governed by sterile inflammation. PMID:27559045

  16. Mincle Signaling Promotes Con A Hepatitis.

    Science.gov (United States)

    Greco, Stephanie H; Torres-Hernandez, Alejandro; Kalabin, Aleksandr; Whiteman, Clint; Rokosh, Rae; Ravirala, Sushma; Ochi, Atsuo; Gutierrez, Johana; Salyana, Muhammad Atif; Mani, Vishnu R; Nagaraj, Savitha V; Deutsch, Michael; Seifert, Lena; Daley, Donnele; Barilla, Rocky; Hundeyin, Mautin; Nikifrov, Yuriy; Tejada, Karla; Gelb, Bruce E; Katz, Steven C; Miller, George

    2016-10-01

    Con A hepatitis is regarded as a T cell-mediated model of acute liver injury. Mincle is a C-type lectin receptor that is critical in the immune response to mycobacteria and fungi but does not have a well-defined role in preclinical models of non-pathogen-mediated inflammation. Because Mincle can ligate the cell death ligand SAP130, we postulated that Mincle signaling drives intrahepatic inflammation and liver injury in Con A hepatitis. Acute liver injury was assessed in the murine Con A hepatitis model using C57BL/6, Mincle(-/-), and Dectin-1(-/-) mice. The role of C/EBPβ and hypoxia-inducible factor-1α (HIF-1α) signaling was assessed using selective inhibitors. We found that Mincle was highly expressed in hepatic innate inflammatory cells and endothelial cells in both mice and humans. Furthermore, sterile Mincle ligands and Mincle signaling intermediates were increased in the murine liver in Con A hepatitis. Most significantly, Mincle deletion or blockade protected against Con A hepatitis, whereas Mincle ligation exacerbated disease. Bone marrow chimeric and adoptive transfer experiments suggested that Mincle signaling in infiltrating myeloid cells dictates disease phenotype. Conversely, signaling via other C-type lectin receptors did not alter disease course. Mechanistically, we found that Mincle blockade decreased the NF-κβ-related signaling intermediates C/EBPβ and HIF-1α, both of which are necessary in macrophage-mediated inflammatory responses. Accordingly, Mincle deletion lowered production of nitrites in Con A hepatitis and inhibition of both C/EBPβ and HIF-1α reduced the severity of liver disease. Our work implicates a novel innate immune driver of Con A hepatitis and, more broadly, suggests a potential role for Mincle in diseases governed by sterile inflammation. Copyright © 2016 by The American Association of Immunologists, Inc.

  17. ¿Del Fordismo a la Acumulación Flexible?

    Directory of Open Access Journals (Sweden)

    Luis Alberto Bellon Álvarez

    2016-02-01

    Full Text Available El presente trabajo tiene como objetivo fundamental identificar las características del fordismo, así como los sistemas de producción flexibles situándolos dentro de las nuevas realidades sociales y económicas de la actual economía globalizada. De este modo se busca estudiar la transición del taylorismo al fordismo, haciendo una reflexión sobre el contexto y la relación que se tiene con los cambios industriales y organizacionales sucedidos desde la década de los años sesenta, que desencadenaron en la crisis del fordismo y la aparición de los modelos de acumulación flexibles

  18. Cosecha manual de café con asistencia neumática.

    Directory of Open Access Journals (Sweden)

    Palencia López Francisco Obdulio

    2002-06-01

    Full Text Available En Cenicafé se evaluó un nuevo método para la cosecha manual de café en el cual se utiliza un procedimiento simplificado para desprender las cerezas y un dispositivo neumático para transportarlas desde la base del árbol hasta el almacenamiento temporal. El método simplificado propuesto por Vélez et. al para desprender las cerezas utilizado consta de únicamente cuatro actividades (Transportar vacío buscando, Sostener, Arrancar y Dejar carga en lugar de las seis identificadas por Vélez et al en la cosecha manual tradicional. El dispositivo neumático, semiestacionario, desarrollado consta de: seis tolvas receptoras (sombrillas invertidas, que se colocan en la base de igual número de árboles para recibir el café desprendido por los recolectores; mangueras flexibles para transportar el café hasta la tolva de almacenamiento temporal; y un ventilador centrífugo accionado por un motor a gasolina. Los resultados obtenidos indican que con el nuevo método de recolección se mejoran los indicadores eficiencia y pérdidas de frutos al suelo. La calidad de la recolección con los dispositivos evaluados fue igual. El rendimiento operativo con el nuevo método fue inferior al observado con el método tradicional.

  19. Research into Flexibility Services. Final Report

    International Nuclear Information System (INIS)

    2005-03-01

    The Dutch Office for Energy Regulation (DTe) is currently investigating the Dutch gas flexibility market. DTe is concerned that Gasunie is dominant in the market. In order to take a view of Gasunie's market position, DTe needs to first define the market for gas flexibility services and then explore whether Gasunie is dominant in the market (or markets). DTe has commissioned Frontier to undertake the respective formal analysis. This report summarises the findings by Frontier. On the basis of this report and a formal consultation process, We follow a three-step approach to the study: (1) We first define the relevant markets for gas flexibility (Section 3); (2) We then analyse the structure of the markets for flexibility that we have defined (Section 4); (3) Finally, we assess whether Gasunie is dominant in the relevant markets, taking account of market shares and other competitive effects (Section 5). This document is the Final Report, which contains our views as to the market definition for gas flexibility and the position of Gasunie in the market. The remainder of this document is set out as follows: Section 2 provides an overview of aspects of the Dutch gas industry relevant to this study; Section 3 sets out our approach to defining the market and de-Mops our conclusions on the markets for gas flexibility; Section 4 provides our view as to the structure of the relevant flexibility markets as defined in Section 3; Section 5 reports our assessment as to whether Gasunie is dominant in the relevant markets, taking account of market shares and other competitive effects; Section 6 sets out our conclusions about the competitive assessment. We include three annexes that set out details related to the market definition and analysis of dominance

  20. Variables socionutricionales de hogares mazahuas integrados por preescolares desnutridos con madres con obesidad y sin obesidad

    Directory of Open Access Journals (Sweden)

    Conzuelo González, Viridiana Vanessa

    2009-01-01

    Full Text Available El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un estudio transversal (2006-2007, en la comunidad mazahua de San Francisco Tepeolulco, Municipio de Temascalcingo; que incluyó a 85 hogares integrados por preescolares con desnutrición inscritos al programa Oportunidades. Se determinó el estado nutrición de los preescolares con indicadores antropométricos y se obtuvo el IMC de las madres de estos infantes. Se aplicó una encuesta socionutricional, incluida el recordatorio de 24 horas, y complementado con la observación participante (cualitativa. Se encontró que 83% de las madres mazahuas presentaron sobrepeso u obesidad. El estado de nutrición de los preescolares con madres con obesidad presentó un porcentaje mayor de desnutrición (76%. En la variable género, se encontró que 54% de los niños con madres con obesidad tenía baja talla. Al relacionar el nivel educativo de la madre, esta variable resultó ser estadísticamente significativa (p=0.015, donde el analfabetismo está más relacionado con la desnutrición infantil que tienen madres de bajo y/o peso normal. La elevada prevalencia de hogares conformados con preescolares con desnutrición y madres con obesidad, es un síntoma más de la pobreza en zonas indígenas en México, con bajo índice de desarrollo humano.

  1. Epilepsia de la infancia con paroxismos occipitales

    Directory of Open Access Journals (Sweden)

    Albia Pozo Alonso

    1999-09-01

    Full Text Available Se reporta que la epilepsia de la infancia con paroxismos occipitales constituye un síndrome epiléptico muy bien definido; se incluye en el grupo de las epilepsias idiopáticas relacionadas con localización. Los ataques comienzan habitualmente con síntomas visuales, en ocasiones seguidos por ataques hemiclónicos, parciales complejos y tónicoclónicos generalizados. El electroencefalograma interictal muestra complejos de puntaonda de localización occipital y temporal posterior que desaparecen con la apertura de los ojos. Se presenta una paciente de 8 años de edad que reúne los criterios clínicos y electroencefalográficos de la epilepsia de la infancia con paroxismos occipitales y se enfatiza en la evolución supuestamente benigna de dicho síndrome.Is is reported that epilepsy of childhood with occipital paroxysms is an epileptic syndrome that is well defined. It is included in the group of related idiopathic epilepsies with localization. Seizures habitually begin with visual symptoms, which are ocassionally followed by hemiclonic, complex partial, and generalized tonicclonic seizures. The interictal EEG shows spike-wave complexes of occipital and temporal posterior localization that are suppressed by eye opening. A patient aged 8 in whom the clinical and electroencephalographic criteria of epilepsy of childhood with occipital paroxysms are present is studied in this paper. Emphasis is made on the apparently benign evolution of this syndrome.

  2. Reliability analysis of stiff versus flexible piping

    International Nuclear Information System (INIS)

    Lu, S.C.

    1985-01-01

    The overall objective of this research project is to develop a technical basis for flexible piping designs which will improve piping reliability and minimize the use of pipe supports, snubbers, and pipe whip restraints. The current study was conducted to establish the necessary groundwork based on the piping reliability analysis. A confirmatory piping reliability assessment indicated that removing rigid supports and snubbers tends to either improve or affect very little the piping reliability. The authors then investigated a couple of changes to be implemented in Regulatory Guide (RG) 1.61 and RG 1.122 aimed at more flexible piping design. They concluded that these changes substantially reduce calculated piping responses and allow piping redesigns with significant reduction in number of supports and snubbers without violating ASME code requirements. Furthermore, the more flexible piping redesigns are capable of exhibiting reliability levels equal to or higher than the original stiffer design. An investigation of the malfunction of pipe whip restraints confirmed that the malfunction introduced higher thermal stresses and tended to reduce the overall piping reliability. Finally, support and component reliabilities were evaluated based on available fragility data. Results indicated that the support reliability usually exhibits a moderate decrease as the piping flexibility increases. Most on-line pumps and valves showed an insignificant reduction in reliability for a more flexible piping design

  3. Transcervical heller myotomy using flexible endoscopy.

    Science.gov (United States)

    Spaun, Georg O; Dunst, Christy M; Arnold, Brittany N; Martinec, Danny V; Cassera, Maria A; Swanström, Lee L

    2010-12-01

    Esophageal achalasia is most commonly treated by laparoscopic myotomy. Transesophageal approaches using flexible endoscopy have recently been described. We hypothesized that using techniques and flexible instruments from our NOTES experience through a small cervical incision would be a safer and less traumatic route for esophageal myotomy. The purpose of this study was to evaluate the feasibility, safety, and success rate of using flexible endoscopes to perform anterior or posterior Heller myotomy via a transcervical approach. This animal (porcine) and human cadaver study was conducted at the Legacy Research and Technology Center. Mediastinal operations on ten live, anesthetized pigs and two human cadavers were performed using standard flexible endoscopes through a small incision at the supra-sternal notch. The esophagus was dissected to the phreno-esophageal junction using balloon dilatation in the peri-esophageal space followed by either anterior or posterior distal esophageal myotomy. Success rate was recorded of esophageal dissection to the diaphragm and proximal stomach, anterior and posterior myotomy, perforation, and complication rates. Dissection of the esophagus to the diaphragm and performing esophageal myotomy was achieved in 100% of attempts. Posterior Heller myotomy was always extendable onto the gastric wall, while anterior gastric extension of the myotomy was found to be more difficult (4/4 and 2/8, respectively; P = 0.061). Heller myotomy through a small cervical incision using flexible endoscopes is feasible. A complete Heller myotomy was performed with a higher success rate posteriorly possibly due to less anatomic interference.

  4. Experimental Research on Fluid Coupling Flexible Actuator

    Directory of Open Access Journals (Sweden)

    Xiangli Zeng

    2018-02-01

    Full Text Available In the field of micromechanics, piezoelectric actuator has attracted great attention for its high-frequency response, high displacement resolution, and high output force. However, its prospect of practical application has been largely limited by the displacement of micrometer. A fluid coupling flexible actuator was proposed, which utilizes resonance to enlarge the output displacement. The actuator uses a piezoelectric oscillator as an excitation source, fluid as the transmission medium and a flexible diaphragm for the displacement output. On the condition that the fluid is inviscid and incompressible, mathematical formulation of the membrane vibration theory has been analyzed. Then, the prototype is made. The displacement is amplified 21 times to 1.106 mm when driving frequency is 127 Hz. The flexible diaphragm appears the largest displacement output when driving frequency is close to one of the system’s natural frequency. Then, the points with zero amplitude form a circle on the surface of flexible diaphragm and the movement direction of the flexible diaphragm is opposite on different sides of the circle. In fact, rather than vibrates at the first resonance frequency, the membrane in the essay is vibrating at a certain higher-order resonance frequency. The experimental results are mainly consistent with the theoretical analysis.

  5. Flexible graphene bio-nanosensor for lactate.

    Science.gov (United States)

    Labroo, Pratima; Cui, Yue

    2013-03-15

    The development of a flexible nanosensor for detecting lactate could expand opportunities for using graphene, both in fundamental studies for a variety of device platforms and in practical applications. Graphene is a delicate single-layer, two-dimensional network of carbon atoms with ultrasensitive sensing capabilities. Lactic acid is important for clinical analysis, sports medicine, and the food industry. Recently, wearable and flexible bioelectronics on plastics have attracted great interest for healthcare, sports and defense applications due to their advantages of being light-weight, bendable, or stretchable. Here, we demonstrate for the first time the development of a flexible graphene-based bio-nanosensor to detect lactate. Our results show that flexible lactate biosensors can be fabricated on a variety of plastic substrates. The sensor can detect lactate sensitively from 0.08 μM to 20 μM with a fast steady-state measuring time of 2s. The sensor can also detect lactate under different mechanical bending conditions, the sensor response decreased as the bending angle and number of bending repetitions increased. We anticipate that these results could open exciting opportunities for fundamental studies of flexible graphene bioelectronics by using other bioreceptors, as well as a variety of wearable, implantable, real-time, or on-site applications in fields ranging from clinical analysis to defense. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. Flexible heat pipes with integrated bioinspired design

    Directory of Open Access Journals (Sweden)

    Chao Yang

    2015-02-01

    Full Text Available In this work we report the facile fabrication and performance evaluation of flexible heat pipes that have integrated bioinspired wick structures and flexible polyurethane polymer connector design between the copper condenser and evaporator. Inside the heat pipe, a bioinspired superhydrophilic strong-base-oxidized copper mesh with multi-scale micro/nano-structures was used as the wicking material and deionized water was selected as working fluid. Thermal resistances of the fabricated flexible heat pipes charged with different filling ratios were measured under thermal power inputs ranging from 2 W to 12 W while the device was bent at different angles. The fabricated heat pipes with a 30% filling ratio demonstrated a low thermal resistance less than 0.01 K/W. Compared with the vertically oriented straight heat pipes, bending from 30° up to 120° has negligible influence on the heat-transfer performance. Furthermore, repeated heating tests indicated that the fabricated flexible heat pipes have consistent and reliable heat-transfer performance, thus would have important applications for advanced thermal management in three dimensional and flexible electronic devices.

  7. The value of flexibility in conservation financing.

    Science.gov (United States)

    Lennox, Gareth D; Fargione, Joseph; Spector, Sacha; Williams, Gwyn; Armsworth, Paul R

    2017-06-01

    Land-acquisition strategies employed by conservation organizations vary in their flexibility. Conservation-planning theory largely fails to reflect this by presenting models that are either extremely inflexible-parcel acquisitions are irreversible and budgets are fixed-or extremely flexible-previously acquired parcels can readily be sold. This latter approach, the selling of protected areas, is infeasible or problematic in many situations. We considered the value to conservation organizations of increasing the flexibility of their land-acquisition strategies through their approach to financing deals. Specifically, we modeled 2 acquisition-financing methods commonly used by conservation organizations: borrowing and budget carry-over. Using simulated data, we compared results from these models with those from an inflexible fixed-budget model and an extremely flexible selling model in which previous acquisitions could be sold to fund new acquisitions. We then examined 3 case studies of how conservation organizations use borrowing and budget carry-over in practice. Model comparisons showed that borrowing and budget carry-over always returned considerably higher rewards than the fixed-budget model. How they performed relative to the selling model depended on the relative conservation value of past acquisitions. Both the models and case studies showed that incorporating flexibility through borrowing or budget carry-over gives conservation organizations the ability to purchase parcels of higher conservation value than when budgets are fixed without the problems associated with the selling of protected areas. © 2016 Society for Conservation Biology.

  8. Propulsion via flexible flapping in granular media

    Science.gov (United States)

    Peng, Zhiwei; Ding, Yang; Pietrzyk, Kyle; Elfring, Gwynn; Pak, On Shun

    2017-11-01

    Biological locomotion in nature is often achieved by the interaction between a flexible body and its surrounding medium. The interaction of a flexible body with granular media is less understood compared with viscous fluids partially due to its complex rheological properties. In this work, we explore the effect of flexibility on granular propulsion by considering a simple mechanical model in which a rigid rod is connected to a torsional spring that is under a displacement actuation using a granular resistive force theory. Through a combined numerical and asymptotic investigation, we characterize the propulsive dynamics of such a flexible flapper in relation to the actuation amplitude and spring stiffness, and we compare these dynamics with those observed in a viscous fluid. In addition, we demonstrate that the maximum possible propulsive force can be obtained in the steady propulsion limit with a finite spring stiffness and large actuation amplitude. These results may apply to the development of synthetic locomotive systems that exploit flexibility to move through complex terrestrial media. Funding for Z.P. and Y.D. was partially provided by NSFC 394 Grant No. 11672029 and NSAF-NSFC Grant No. U1530401.

  9. Interfacial characterization of flexible hybrid electronics

    Science.gov (United States)

    Najafian, Sara; Amirkhizi, Alireza V.; Stapleton, Scott

    2018-03-01

    Flexible Hybrid Electronics (FHEs) are the new generation of electronics combining flexible plastic film substrates with electronic devices. Besides the electrical features, design improvements of FHEs depend on the prediction of their mechanical and failure behavior. Debonding of electronic components from the flexible substrate is one of the most common and critical failures of these devices, therefore, the experimental determination of material and interface properties is of great importance in the prediction of failure mechanisms. Traditional interface characterization involves isolated shear and normal mode tests such as the double cantilever beam (DCB) and end notch flexure (ENF) tests. However, due to the thin, flexible nature of the materials and manufacturing restrictions, tests mirroring traditional interface characterization experiments may not always be possible. The ideal goal of this research is to design experiments such that each mode of fracture is isolated. However, due to the complex nonlinear nature of the response and small geometries of FHEs, design of the proper tests to characterize the interface properties can be significantly time and cost consuming. Hence numerical modeling has been implemented to design these novel characterization experiments. This research involves loading case and specimen geometry parametric studies using numerical modeling to design future experiments where either shear or normal fracture modes are dominant. These virtual experiments will provide a foundation for designing similar tests for many different types of flexible electronics and predicting the failure mechanism independent of the specific FHE materials.

  10. Intrinsic flexibility of porous materials; theory, modelling and the flexibility window of the EMT zeolite framework

    International Nuclear Information System (INIS)

    Fletcher, Rachel E.; Wells, Stephen A.; Leung, Ka Ming; Edwards, Peter P.; Sartbaeva, Asel

    2015-01-01

    Framework materials possess intrinsic flexibility which can be investigated using geometric simulation. We review framework flexibility properties in energy materials and present novel results on the flexibility window of the EMT zeolite framework containing 18-crown-6 ether as a structure directing agent (SDA). Framework materials have structures containing strongly bonded polyhedral groups of atoms connected through their vertices. Typically the energy cost for variations of the inter-polyhedral geometry is much less than the cost of distortions of the polyhedra themselves – as in the case of silicates, where the geometry of the SiO 4 tetrahedral group is much more strongly constrained than the Si—O—Si bridging angle. As a result, framework materials frequently display intrinsic flexibility, and their dynamic and static properties are strongly influenced by low-energy collective motions of the polyhedra. Insight into these motions can be obtained in reciprocal space through the ‘rigid unit mode’ (RUM) model, and in real-space through template-based geometric simulations. We briefly review the framework flexibility phenomena in energy-relevant materials, including ionic conductors, perovskites and zeolites. In particular we examine the ‘flexibility window’ phenomenon in zeolites and present novel results on the flexibility window of the EMT framework, which shed light on the role of structure-directing agents. Our key finding is that the crown ether, despite its steric bulk, does not limit the geometric flexibility of the framework

  11. Flexible Pedagogies: Employer Engagement and Work-Based Learning. Flexible Pedagogies: Preparing for the Future Series

    Science.gov (United States)

    Kettle, Jane

    2013-01-01

    This publication focuses on national and international policy initiatives to develop a better understanding of work-based learners and the types of flexibility that may well enhance their study especially pedagogically. As part of our five-strand research project "Flexible Pedagogies: preparing for the future" it: (1) highlights the…

  12. Flexible barrier technology for enabling rollable AMOLED displays and upscaling flexible OLED lighting

    NARCIS (Netherlands)

    Li, F.M.; Unnikrishnan, S.; Weijer, P. van de; Assche, F. van; Shen, J.; Ellis, T.; Manders, W.; Akkerman, H.; Bouten, P.; Mol, A.M.B. van

    2013-01-01

    The availability of a high performance thin-film barrier is the most critical challenge in upscaling and commercializing flexible OLED products. We report a flexible thin-film-barrier technology that meets lifetime specifications for OLED lighting, and demonstrate it in rollable QVGA a-IGZO AMOLED

  13. Flexible Programmes in Higher Professional Education: Expert Validation of a Flexible Educational Model

    Science.gov (United States)

    Schellekens, Ad; Paas, Fred; Verbraeck, Alexander; van Merrienboer, Jeroen J. G.

    2010-01-01

    In a preceding case study, a process-focused demand-driven approach for organising flexible educational programmes in higher professional education (HPE) was developed. Operations management and instructional design contributed to designing a flexible educational model by means of discrete-event simulation. Educational experts validated the model…

  14. Development of the Coping Flexibility Scale: Evidence for the Coping Flexibility Hypothesis

    Science.gov (United States)

    Kato, Tsukasa

    2012-01-01

    "Coping flexibility" was defined as the ability to discontinue an ineffective coping strategy (i.e., evaluation coping) and produce and implement an alternative coping strategy (i.e., adaptive coping). The Coping Flexibility Scale (CFS) was developed on the basis of this definition. Five studies involving approximately 4,400 Japanese…

  15. Docking of flexible ligands to flexible receptors in solution by molecular dynamics simulation

    NARCIS (Netherlands)

    Mangoni, R; Roccatano, D; Di Nola, A

    1999-01-01

    In this paper, a method of simulating the docking of small flexible ligands to flexible receptors in water is reported. The method is based on molecular dynamics simulations and is an extension of an algorithm previously reported by Di Nola et al, (Di Nola et al,, Proteins 1994;19:174-182), The

  16. Mechanistic modelling of weak interlayers in flexible and semi-flexible road pavements: Part 2

    CSIR Research Space (South Africa)

    De Beer, Morris

    2012-04-01

    Full Text Available This paper (Part 2 of a two-part set of papers) discusses models and illustrates the adverse effects of weak layers, interlayers, laminations and/or weak interfaces in flexible and semi-flexible pavements, also incorporating lightly cemented layers...

  17. Local Flexibility Market Design for Aggregators Providing Multiple Flexibility Services at Distribution Network Level

    Directory of Open Access Journals (Sweden)

    Pol Olivella-Rosell

    2018-04-01

    Full Text Available This paper presents a general description of local flexibility markets as a market-based management mechanism for aggregators. The high penetration of distributed energy resources introduces new flexibility services like prosumer or community self-balancing, congestion management and time-of-use optimization. This work is focused on the flexibility framework to enable multiple participants to compete for selling or buying flexibility. In this framework, the aggregator acts as a local market operator and supervises flexibility transactions of the local energy community. Local market participation is voluntary. Potential flexibility stakeholders are the distribution system operator, the balance responsible party and end-users themselves. Flexibility is sold by means of loads, generators, storage units and electric vehicles. Finally, this paper presents needed interactions between all local market stakeholders, the corresponding inputs and outputs of local market operation algorithms from participants and a case study to highlight the application of the local flexibility market in three scenarios. The local market framework could postpone grid upgrades, reduce energy costs and increase distribution grids’ hosting capacity.

  18. Skill Flexibility among Schoolteachers: Operationalization and Organizational Implications.

    Science.gov (United States)

    Rosenblatt, Zehava; Inbal, Batia

    1999-01-01

    Investigates effects of skill flexibility on Israeli secondary teachers' work attitudes and job performance. Both role and functional flexibility were associated with improved teachers' work performance; role flexibility is linked to high organizational commitment and low powerlessness. Principals appreciate skill flexibility, but organizational…

  19. Organizing for Flexibility: Addressing Dynamic Capabilities and Organization Design

    OpenAIRE

    van der Weerdt, Niels; Volberda, Henk; Verwaal, Ernst; Stienstra, Marten

    2014-01-01

    The increasingly dynamic nature of organizational environments has led the research community to study organizational flexibility. Although the research literature stresses the complexity of the organizational flexibility construct, it lacks a comprehensive empirical study addressing the relationships among various dimensions of organizational flexibility. This chapter develops a theoretical framework specifying the linkages between types of flexibility and organization design characteristics...

  20. Flexible labour strategy in the Dutch automotive industry

    NARCIS (Netherlands)

    van Riemsdijk, Maarten; de Leede, Jan

    2001-01-01

    Labour flexibility is a major way for companies to become more flexible. Why companies use flexible labour relations varies widely per industry. We assess the development of labour flexibility within the Dutch automotive industry. Four cases, together representing the production chain, are

  1. Aspectos Psicosociales Relacionados con el TEPT en Pacientes con Cáncer de Mama

    OpenAIRE

    Hernández Moreno, Fresia Paloma; Landero Hernández, René

    2015-01-01

    El objetivo del estudio fue analizar la relación del estrés, la depresión y las estrategias de afrontamiento con el Trastorno de Estrés Postraumático (TEPT) en una muestra de pacientes con cáncer de mama. Se realizó con una muestra no probabilística de 52 mujeres con cáncer de mama. Se encontró una relación entre TEPT y estrés (r= .344, p= .014), TEPT y depresión (rs=.346, p= .013). El TEPT correlacionó con evitación cognitiva (r= .437, p= .001), TEPT y desesperanza (rs= .437, p= .001) y TEPT...

  2. Creating flexible work arrangements through idiosyncratic deals.

    Science.gov (United States)

    Hornung, Severin; Rousseau, Denise M; Glaser, Jürgen

    2008-05-01

    A survey of 887 employees in a German government agency assessed the antecedents and consequences of idiosyncratic arrangements individual workers negotiated with their supervisors. Work arrangements promoting the individualization of employment conditions, such as part-time work and telecommuting, were positively related to the negotiation of idiosyncratic deals ("i-deals"). Worker personal initiative also had a positive effect on i-deal negotiation. Two types of i-deals were studied: flexibility in hours of work and developmental opportunities. Flexibility i-deals were negatively related and developmental i-deals positively related to work-family conflict and working unpaid overtime. Developmental i-deals were also positively related to increased performance expectations and affective organizational commitment, while flexibility i-deals were unrelated to either. PsycINFO Database Record (c) 2008 APA, all rights reserved.

  3. Methods for fabrication of flexible hybrid electronics

    Science.gov (United States)

    Street, Robert A.; Mei, Ping; Krusor, Brent; Ready, Steve E.; Zhang, Yong; Schwartz, David E.; Pierre, Adrien; Doris, Sean E.; Russo, Beverly; Kor, Siv; Veres, Janos

    2017-08-01

    Printed and flexible hybrid electronics is an emerging technology with potential applications in smart labels, wearable electronics, soft robotics, and prosthetics. Printed solution-based materials are compatible with plastic film substrates that are flexible, soft, and stretchable, thus enabling conformal integration with non-planar objects. In addition, manufacturing by printing is scalable to large areas and is amenable to low-cost sheet-fed and roll-to-roll processes. FHE includes display and sensory components to interface with users and environments. On the system level, devices also require electronic circuits for power, memory, signal conditioning, and communications. Those electronic components can be integrated onto a flexible substrate by either assembly or printing. PARC has developed systems and processes for realizing both approaches. This talk presents fabrication methods with an emphasis on techniques recently developed for the assembly of off-the-shelf chips. A few examples of systems fabricated with this approach are also described.

  4. Analytical and numerical modeling for flexible pipes

    Science.gov (United States)

    Wang, Wei; Chen, Geng

    2011-12-01

    The unbonded flexible pipe of eight layers, in which all the layers except the carcass layer are assumed to have isotropic properties, has been analyzed. Specifically, the carcass layer shows the orthotropic characteristics. The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness. With consideration of the effective elastic moduli, the structure can be properly analyzed. Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated. A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque. Further, the friction and contact of interlayer have been considered. Comparison between the finite element model and experimental results obtained in literature has been given and discussed, which might provide practical and technical support for the application of unbonded flexible pipes.

  5. Granular flow down a flexible inclined plane

    Directory of Open Access Journals (Sweden)

    Sonar Prasad

    2017-01-01

    Full Text Available Discrete and continuous systems are commonly studied individually, but seldom together. Indeed, granular flows are typically studied through flows over a rigid base. Here, we investigate the behaviour of granular flows over an inclined, flexible base. The flexible base is modeled as a rigid platform mounted on springs and has one degree of freedom. The base vibrations are introduced by the flow. We simulate such flows through a discrete element method and compare with experiments. We find that a flexible base increased the upper limit of the inclination up to which a steady flow is possible by at least 3 degrees. This stabilized zone may have important implications in applications such as conveyor belts and chutes.

  6. Modeling and control of flexible space structures

    Science.gov (United States)

    Wie, B.; Bryson, A. E., Jr.

    1981-01-01

    The effects of actuator and sensor locations on transfer function zeros are investigated, using uniform bars and beams as generic models of flexible space structures. It is shown how finite element codes may be used directly to calculate transfer function zeros. The impulse response predicted by finite-dimensional models is compared with the exact impulse response predicted by the infinite dimensional models. It is shown that some flexible structures behave as if there were a direct transmission between actuator and sensor (equal numbers of zeros and poles in the transfer function). Finally, natural damping models for a vibrating beam are investigated since natural damping has a strong influence on the appropriate active control logic for a flexible structure.

  7. Demand flexibility from residential heat pump

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2014-01-01

    Demand response (DR) is considered as a potentially effective tool to compensate generation intermittency imposed by renewable sources. Further, DR can instigate to offer optimum asset utilization and to avoid or delay the need for new infrastructure investment. Being a sizable load together...... with high thermal time constant, heat pumps (HP) can offer a great deal of flexibility in the future intelligent grids especially to compensate fluctuating generation. However, the HP flexibility is highly dependent on thermal demand profile, namely hot water and space heating demand. This paper proposes...... price based scheduling followed by a demand dispatch based central control and a local voltage based adaptive control, to realize HP demand flexibility. Two-step control architecture, namely local primary control encompassed by the central coordinative control, is proposed to implement...

  8. Plasma jet printing for flexible substrates

    Energy Technology Data Exchange (ETDEWEB)

    Gandhiraman, Ram P.; Singh, Eric; Diaz-Cartagena, Diana C.; Koehne, Jessica; Meyyappan, M. [Center for Nanotechnology, NASA Ames Research Center, Moffett Field, California 94035 (United States); Nordlund, Dennis [Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States)

    2016-03-21

    Recent interest in flexible electronics and wearable devices has created a demand for fast and highly repeatable printing processes suitable for device manufacturing. Robust printing technology is critical for the integration of sensors and other devices on flexible substrates such as paper and textile. An atmospheric pressure plasma-based printing process has been developed to deposit different types of nanomaterials on flexible substrates. Multiwalled carbon nanotubes were deposited on paper to demonstrate site-selective deposition as well as direct printing without any type of patterning. Plasma-printed nanotubes were compared with non-plasma-printed samples under similar gas flow and other experimental conditions and found to be denser with higher conductivity. The utility of the nanotubes on the paper substrate as a biosensor and chemical sensor was demonstrated by the detection of dopamine, a neurotransmitter, and ammonia, respectively.

  9. Flexible Electronics Development Supported by NASA

    Science.gov (United States)

    Baumann, Eric

    2014-01-01

    The commercial electronics industry is leading development in most areas of electronics for NASA applications; however, working in partnership with industry and the academic community, results from NASA research could lead to better understanding and utilization of electronic materials by the flexible electronics industry. Innovative ideas explored by our partners in industry and the broader U.S. research community help NASA execute our missions and bring new American products and services to the global technology marketplace. [Mike Gazarik, associate administrator for Space Technology, NASA Headquarters, Washington DC] This presentation provides information on NASA needs in electronics looking towards the future, some of the work being supported by NASA in flexible electronics, and the capabilities of the Glenn Research Center supporting the development of flexible electronics.

  10. A flexible modelling software for data acquisition

    International Nuclear Information System (INIS)

    Shu Yantai; Chen Yanhui; Yang Songqi; Liu Genchen

    1992-03-01

    A flexible modelling software for data acquisition is based on an event-driven simulator. It can be used to simulate a wide variety of systems which can be modelled as open queuing networks. The main feature of the software is its flexibility to evaluate the performance of various data acquisition system, whether pulsed or not. The flexible features of this software as follow: The user can choose the number of processors in the model and the route which every job takes to move the model. the service rate of a processor is automatically adapted. The simulator has a pipe-line mechanism. A job can be divided into several segments and a processor may be used as a compression component etc. Some modelling techniques and applications of this software in plasma physics laboratories are also presented

  11. Printed electronic on flexible and glass substrates

    Science.gov (United States)

    Futera, Konrad; Jakubowska, Małgorzata; Kozioł, Grażyna

    2010-09-01

    Organic electronics is a platform technology that enables multiple applications based on organic electronics but varied in specifications. Organic electronics is based on the combination of new materials and cost-effective, large area production processes that provide new fields of application. Organic electronic by its size, weight, flexibility and environmental friendliness electronics enables low cost production of numerous electrical components and provides for such promising fields of application as: intelligent packaging, low cost RFID, flexible solar cells, disposable diagnostic devices or games, and printed batteries [1]. The paper presents results of inkjetted electronics elements on flexible and glass substrates. The investigations was target on characterizing shape, surface and geometry of printed structures. Variety of substrates were investigated, within some, low cost, non specialized substrate, design for other purposes than organic electronic.

  12. Desarrollo de aleaciones multifuncionales con base titanio

    OpenAIRE

    Pareja, Ramiro

    2007-01-01

    El Laboratorio de Materiales Nano-estructurados y Multifuncionales del Departamento de Física de la Universidad Carlos III de Madrid se dedica al desarrollo, procesado y caracterización de aleaciones con propiedades mejores que las preparadas por métodos convencionales. La mejora de las propiedades se consigue produciendo las aleaciones con un tamaño de grano nanométrico o ultrafino, o introduciendo una dispersión de nano-partículas de óxido en la matriz. El grupo está interesado en algún tip...

  13. TIROTOXICOSIS GESTACIONAL: PATOLOGIA CON RIESGO VITAL

    OpenAIRE

    Valdés R.,Enrique; Pilasi M.,Carlos; Núñez U.,Tatiana

    2003-01-01

    Se presenta un caso clínico con diagnóstico final de Tirotoxicosis gestacional que debuta con una complicación excepcional, insuficiencia cardíaca congestiva e hipertensión pulmonar severa. Se presenta la experiencia del Hospital Clínico de la Universidad de Chile, proponiendo que su diagnóstico y tratamiento oportunos son la base del pronóstico de esta patología de riesgo vital para el binomio madre-hijo

  14. Amplificadores con transistores. Estudio y dimensionado

    OpenAIRE

    Lubiano García, Adrián

    2017-01-01

    Este trabajo es un estudio de las distintas configuraciones de los amplificadores con transistores vistos en la asignatura de Electrónica Analógica del tercer curso del Grado en Ingeniería en Electrónica Industrial y Automática de la Escuela de Ingenierías Industriales de la Universidad de Valladolid. En este trabajo se mostrarán los pasos seguidos en la creación de una aplicación con Visual Basic para la realización de los ejercicios de las distintas configuraciones, así...

  15. Galaxias australes con núcleo doble

    Science.gov (United States)

    Gimeno, G.; Díaz, R.; Carranza, G.

    Se estudia una muestra de galaxias australes con núcleo doble a partir de una búsqueda extensiva en la literatura. Se analizan las características morfológicas, fotométricas y espectroscópicas de la muestra. Para algunas galaxias se han realizado observaciones con el espectrógrafo multifunción (EMF) de la Estación Astrofísica de Bosque Alegre a partir de las cuales se determinaron parámetros cinemáticos.

  16. Movable MEMS Devices on Flexible Silicon

    KAUST Repository

    Ahmed, Sally

    2013-05-05

    Flexible electronics have gained great attention recently. Applications such as flexible displays, artificial skin and health monitoring devices are a few examples of this technology. Looking closely at the components of these devices, although MEMS actuators and sensors can play critical role to extend the application areas of flexible electronics, fabricating movable MEMS devices on flexible substrates is highly challenging. Therefore, this thesis reports a process for fabricating free standing and movable MEMS devices on flexible silicon substrates; MEMS flexure thermal actuators have been fabricated to illustrate the viability of the process. Flexure thermal actuators consist of two arms: a thin hot arm and a wide cold arm separated by a small air gap; the arms are anchored to the substrate from one end and connected to each other from the other end. The actuator design has been modified by adding etch holes in the anchors to suit the process of releasing a thin layer of silicon from the bulk silicon substrate. Selecting materials that are compatible with the release process was challenging. Moreover, difficulties were faced in the fabrication process development; for example, the structural layer of the devices was partially etched during silicon release although it was protected by aluminum oxide which is not attacked by the releasing gas . Furthermore, the thin arm of the thermal actuator was thinned during the fabrication process but optimizing the patterning and etching steps of the structural layer successfully solved this problem. Simulation was carried out to compare the performance of the original and the modified designs for the thermal actuators and to study stress and temperature distribution across a device. A fabricated thermal actuator with a 250 μm long hot arm and a 225 μm long cold arm separated by a 3 μm gap produced a deflection of 3 μm before silicon release, however, the fabrication process must be optimized to obtain fully functioning

  17. Stochastic Dynamics Underlying Cognitive Stability and Flexibility.

    Directory of Open Access Journals (Sweden)

    Kai Ueltzhöffer

    2015-06-01

    Full Text Available Cognitive stability and flexibility are core functions in the successful pursuit of behavioral goals. While there is evidence for a common frontoparietal network underlying both functions and for a key role of dopamine in the modulation of flexible versus stable behavior, the exact neurocomputational mechanisms underlying those executive functions and their adaptation to environmental demands are still unclear. In this work we study the neurocomputational mechanisms underlying cue based task switching (flexibility and distractor inhibition (stability in a paradigm specifically designed to probe both functions. We develop a physiologically plausible, explicit model of neural networks that maintain the currently active task rule in working memory and implement the decision process. We simplify the four-choice decision network to a nonlinear drift-diffusion process that we canonically derive from a generic winner-take-all network model. By fitting our model to the behavioral data of individual subjects, we can reproduce their full behavior in terms of decisions and reaction time distributions in baseline as well as distractor inhibition and switch conditions. Furthermore, we predict the individual hemodynamic response timecourse of the rule-representing network and localize it to a frontoparietal network including the inferior frontal junction area and the intraparietal sulcus, using functional magnetic resonance imaging. This refines the understanding of task-switch-related frontoparietal brain activity as reflecting attractor-like working memory representations of task rules. Finally, we estimate the subject-specific stability of the rule-representing attractor states in terms of the minimal action associated with a transition between different rule states in the phase-space of the fitted models. This stability measure correlates with switching-specific thalamocorticostriatal activation, i.e., with a system associated with flexible working memory

  18. Itinerarios de aprendizaje flexibles basados en mapas conceptuales

    Directory of Open Access Journals (Sweden)

    Olga Lucía Agudelo

    2015-07-01

    Full Text Available Se estudia el uso de itinerarios de aprendizaje  basados en mapas conceptuales como una propuesta para un diseño instruccional más flexible que potencie el aprendizaje y se centre en el estudiante, generando procesos no lineales, caracterizando sus elementos, estableciendo relaciones entre ellos y configurando un modelo general con especificaciones para  cada nivel de educación. Mediante una metodología construida sobre el modelo SAM (Successive Aproximation Model, se ha estudiado el proceso de diseño, implementación y evaluación de itinerarios de aprendizaje, en los que se representan en mapas conceptuales y de manera organizada y no lineal, conjuntos de actividades  que permiten el desarrollo de las competencias que deben comprenderse, dominarse y demostrarse. Los resultados obtenidos muestran la adecuación del itinerario de aprendizaje basado en mapas conceptuales a las características de los sujetos, resolviendo situaciones de la realidad mediante la construcción y creación de nuevos esquemas y formas de gestión del conocimiento, al mismo tiempo que aporta reflexión sobre los principios del diseño curricular utilizando TIC y genera autonomía en el proceso de aprendizaje.

  19. Free-Standing, Flexible, Superomniphobic Films.

    Science.gov (United States)

    Vahabi, Hamed; Wang, Wei; Movafaghi, Sanli; Kota, Arun K

    2016-08-31

    Fabrication of most superomniphobic surfaces requires complex process conditions or specialized and expensive equipment or skilled personnel. In order to circumvent these issues and make them end-user-friendly, we developed the free-standing, flexible, superomniphobic films. These films can be stored and delivered to the end-users, who can readily attach them to virtually any surface (even irregular shapes) and impart superomniphobicity. The hierarchical structure, the re-entrant texture, and the low solid surface energy render our films superomniphobic for a wide variety of liquids. We demonstrate that our free-standing, flexible, superomniphobic films have applications in enhanced chemical resistance and enhanced weight bearing.

  20. Flexible Polyhedral Surfaces with Two Flat Poses

    Directory of Open Access Journals (Sweden)

    Hellmuth Stachel

    2015-05-01

    Full Text Available We present three types of polyhedral surfaces, which are continuously flexible and have not only an initial pose, where all faces are coplanar, but pass during their self-motion through another pose with coplanar faces (“flat pose”. These surfaces are examples of so-called rigid origami, since we only admit exact flexions, i.e., each face remains rigid during the motion; only the dihedral angles vary. We analyze the geometry behind Miura-ori and address Kokotsakis’ example of a flexible tessellation with the particular case of a cyclic quadrangle. Finally, we recall Bricard’s octahedra of Type 3 and their relation to strophoids.

  1. Electro Spray Method for Flexible Display

    Science.gov (United States)

    2016-05-12

    AFRL-AFOSR-JP-TR-2016-0095 Electro Spray Method for Flexible Display Yukiharu Uraoka NARA INSTITUTE OF SCIENCE AND TECHNOLOGY Final Report 11/26/2016...DATES COVERED (From - To)  20 Mar 2013 to 19 May 2016 4. TITLE AND SUBTITLE Electro Spray Method for Flexible Display 5a.  CONTRACT NUMBER 5b.  GRANT...NUMBER FA2386-13-1-4024 5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) Yukiharu Uraoka 5d.  PROJECT NUMBER 5e.  TASK NUMBER 5f.   WORK UNIT NUMBER 7

  2. Cold plasma decontamination using flexible jet arrays

    Science.gov (United States)

    Konesky, Gregory

    2010-04-01

    Arrays of atmospheric discharge cold plasma jets have been used to decontaminate surfaces of a wide range of microorganisms quickly, yet not damage that surface. Its effectiveness in decomposing simulated chemical warfare agents has also been demonstrated, and may also find use in assisting in the cleanup of radiological weapons. Large area jet arrays, with short dwell times, are necessary for practical applications. Realistic situations will also require jet arrays that are flexible to adapt to contoured or irregular surfaces. Various large area jet array prototypes, both planar and flexible, are described, as is the application to atmospheric decontamination.

  3. Flexible input, dazzling output with IBM i

    CERN Document Server

    Victória-Pereira, Rafael

    2014-01-01

    Link your IBM i system to the modern business server world! This book presents easier and more flexible ways to get data into your IBM i system, along with rather surprising methods to export and present the vital business data it contains. You'll learn how to automate file transfers, seamlessly connect PC applications with your RPG programs, and much more. Input operations will become more flexible and user-proof, with self-correcting import processes and direct file transfers that require a minimum of user intervention. Also learn novel ways to present information: your DB2 data will look gr

  4. On the concept of flexibility: A dual control perspective

    OpenAIRE

    Leeuw, A. C J; Volberda, Henk

    1996-01-01

    textabstractOrganizational flexibility has recently received much attention from researchers, management consultants and practitioners. In general, the term 'flexibility' has a positive connotation: flexible organizations are the better ones. However, the meaning of flexibility as well as its relation to the functioning of an organization is still ambiguous. This article develops a systematic and multidimensional picture of flexibility on the basis of views taken from the systems theory of co...

  5. Coordination and Control of Flexible Building Loads for Renewable Integration; Demonstrations using VOLTTRON

    Energy Technology Data Exchange (ETDEWEB)

    Hao, He [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Guopeng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Sen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Katipamula, Srinivas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-10-31

    Renewable energy resources such as wind and solar power have a high degree of uncertainty. Large-scale integration of these variable generation sources into the grid is a big challenge for power system operators. Buildings, in which we live and work, consume about 75% of the total electricity in the United States. They also have a large capacity of power flexibility due to their massive thermal capacitance. Therefore, they present a great opportunity to help the grid to manage power balance. In this report, we study coordination and control of flexible building loads for renewable integration. We first present the motivation and background, and conduct a literature review on building-to-grid integration. We also compile a catalog of flexible building loads that have great potential for renewable integration, and discuss their characteristics. We next collect solar generation data from a photovoltaic panel on Pacific Northwest National Laboratory campus, and conduct data analysis to study their characteristics. We find that solar generation output has a strong uncertainty, and the uncertainty occurs at almost all time scales. Additional data from other sources are also used to verify our study. We propose two transactive coordination strategies to manage flexible building loads for renewable integration. We prove the theories that support the two transactive coordination strategies and discuss their pros and cons. In this report, we select three types of flexible building loads—air-handling unit, rooftop unit, and a population of WHs—for which we demonstrate control of the flexible load to track a dispatch signal (e.g., renewable generation fluctuation) using experiment, simulation, or hardware-in-the-loop study. More specifically, we present the system description, model identification, controller design, test bed setup, and experiment results for each demonstration. We show that coordination and control of flexible loads has a great potential to integrate

  6. IoT con Raspberry Pi

    OpenAIRE

    García Muelas, Carlos

    2015-01-01

    Estudio de diferentes plataformas software y hardware del internet de las cosas. Aplicación real con Raspberry Pi. Estudi de diferents plataformes programari i maquinari de l'internet de les coses. Aplicació real amb Raspberry Pi. Bachelor thesis for the Telecommunication Technologies program on Telematics.

  7. en personas con el VIH/SIDA

    Directory of Open Access Journals (Sweden)

    Ximena Palacios Espinosa

    2006-01-01

    Full Text Available El objetivo de este estudio fue hallar la relación de la intención e ideación suicida con algunas variables sociodemográficas, las características de la enfermedad, el tratamiento antirretroviral y los aspectos piscoafectivos en personas con el VIH/SIDA que residen en Bogotá (Colombia y pertenecientes a una fundación. Para ello, se tomó una muestra de 75 pacientes con VIH positivo a quienes se evaluó a través de una entrevista semiestructurada y dos instrumentos: el inventario de depresión de Beck (IBD y la escala de Ideación Suicida (SSI. Los resultados mostraron que solo 29 personas tenían ideación suicida y 10 intención suicida: De los 10 solo 2 sujetos tenían intención después del diagnóstico. Se encontró una relación estadística significativa para ideación suicida e intención suicida con edad, estrato socioeconómico, estado civil, orientación sexual, las características de la enfermedad, el tratamiento antirretroviral y los aspectos piscoafectivos.

  8. La relazione empatica con i robot

    NARCIS (Netherlands)

    Marti, P.; Iacono, I.; Tittarelli, M.

    2013-01-01

    È possibile instaurare una relazione empatica tra un essere umano e un robot? Il presente studio valuta le soluzioni di design adottate nella progettazione di una maschera empatica, implementata su un tablet, che consente all’anziano di dialogare nell’ambiente domestico con un robot che lo assiste

  9. Sarcoma de Kaposi en paciente con SIDA

    Directory of Open Access Journals (Sweden)

    Jesús Ramón León Polanco

    2015-01-01

    Full Text Available Se presenta el caso de un paciente masculino de 33 años de edad, con antecedentes de VIH-SIDA desde hace 10 años, que se mantiene en tratamiento con antirretrovirales. Durante todo este tiempo ha presentado varios episodios de infecciones respiratorias, incluyendo tuberculosis pulmonar 5 años atrás. Acude a consulta refiriendo edemas en miembros inferiores acompañado de lesiones en piel de color violáceo de un año de evolución, previamente interpretado como linfangitis rebelde al tratamiento y que se extendió a la cara interna de los muslos y a los miembros inferiores. Con pérdida de peso, no prurito en las lesiones, fiebre, lesiones en la mucosa oral. Se determinó hemoglobina 89 g/L, leucocitos 4,5 x 109 /L, se estudiaron las funciones hepática y renales resultando normales. Radiografías de tórax y ultrasonido abdominal normales. Se realizó estudio anatomopatológico de piel que informó Sarcoma de Kaposi. Se impuso tratamiento con quimioterapia

  10. Las construcciones con esqueleto en madera

    Directory of Open Access Journals (Sweden)

    Heinz Leser S.

    1984-06-01

    Estos sistemas se emplean preferentemente en viviendas prefabricadas y edificios de pequeña envergadura. Finalmente, consideramos las construcciones con "esqueleto en madera", cuyo campo de aplicación principal está en las edificaciones de mediana extensión: escuelas, centros comunitarios, pequeñas industrias o bloques habitacionales.

  11. Conversazioni autobiografiche con Albino Sacco-Casamassima

    Directory of Open Access Journals (Sweden)

    Orazio Maria Valastro

    2004-03-01

    Full Text Available Nel 1948 venne Olivetti a Matera. Olivetti venne a Matera con un certo ambasciatore americano che praticamente aveva preparato o stava dando una mano per il piano Marschall, venne a Matera e mi vollero incontrare. Io sono stato chiamato dalla piazza, stavo nella piazza, era il mese di luglio, una cosa di questo genere, e andai in un bar, un bar ad angolo mi ricordo in Via Don Minzioni, dove questo Olivetti mi disse 'ma lei che cosa fa coi sassi?' 'Che cos'è questa storia?' Gli raccontai un po' che cosa facevo io con questi amici, avevamo fatto questo, insomma tutto quello che avevamo fatto nei sassi e che volevamo preparare ancora per presentare a qualcuno un piano di revisionamento dei sassi. Mi ricordo, era la prima volta che avevo visto Adriano Olivetti, ne avevo sentito parlare però non avevo mai visto quest'uomo con gli occhi celesti, minuto, coi capelli bianchi, riccioluto, con una cravatta bianca, cosa che mi fece impressione, una specie di angelo.

  12. Procesamiento de argumentos en personas con afasia

    Directory of Open Access Journals (Sweden)

    Luis Martínez

    2012-06-01

    Full Text Available En las personas con afasia se alteran diversos procesos lingüísticos. Entre las alteraciones más comunes tenemos aquellas que se producen en el procesamiento sintáctico, lo cual es evidente en el procesamiento de los argumentos. Investigaciones previas realizadas a sujetos con afasia reflejan un procesamientodeficiente de argumentos, lo cual se hace más evidente a medida que el número de argumentos aumenta. Se ha encontrado que mientras mayor es la complejidad en la estructura de la oración, los sujetos afásicos manifiestan mayores dificultades en el procesamiento de la misma. El presente estudio indaga en las dificultades que presentan los sujetos adultos con trastornos afásicos hablantes de español en el procesamiento de argumentos durante tareas de descripción. Este trabajo corrobora la evidencia de que los sujetos con afasia manifiestan un manejo deficiente en el procesamiento de argumentos en las tareas señaladas.

  13. Coriocarcinoma con metástasis pulmonar

    Directory of Open Access Journals (Sweden)

    Vicia Sánchez Abalos

    2014-05-01

    Full Text Available Se presenta el caso clínico de una fémina de 44 años de edad, con 32 semanas de embarazo, la cual fuera ingresada en la Unidad de Cuidados Intensivos del Hospital General Docente "Dr. Juan Bruno Zayas Alfonso" de Santiago de Cuba, por presentar insuficiencia respiratoria aguda como consecuencia de una sepsis. La paciente fue tratada con cefalosporina de tercera generación y ventilación mecánica no invasiva, pero se mantuvieron las características gasométricas de hipoxemia y una mala reacción terapéutica, por lo que se requirió instrumentación de las vías respiratorias y soporte hemodinámico, sin lograr regresión del cuadro clínico, lo cual condujo a un paro cardiorrespiratorio y, con ello, a la muerte. La necropsia mostró un coriocarcinoma del endometrio con metástasis pulmonar

  14. Con la testa fra le nuvole

    Directory of Open Access Journals (Sweden)

    André Greboge

    2015-06-01

    Full Text Available Partitura de Con la testa fra le nuvole, composta em 2015 para piano e harpa de pedais. Este memorial apresenta as notas sobre a obra e a organização do processo composicional, baseada em um insight composicional a partir da ideia de complexidade apresentada por James Tenney em Meta Meta-hodos (1988.

  15. REDUCCIÓN DE ÓXIDOSDE NITROGENO CON CATALIZADORES ZEOLÍTICOS INTERCAMBIADOS CON COBALTO

    Directory of Open Access Journals (Sweden)

    Enrique Alexis García Moya

    2012-10-01

    Full Text Available Se presenta un estudio sobre la reducción catalítica selectiva (RCS de NOx con metano en presencia de oxígeno en exceso con varios catalizadores a base de las zeolitas mordenita, ferrierita y ZSM-5 intercambiadas con diferentes cargas de cobalto y con las correspondientes zeolitas en forma acida. Cuando la mezcla reactiva contenía mayormente NO2 en lugar de NO, los catalizadores ácidos mostraron las más altas velocidades de formación de N2 en condiciones secas. Las mayores actividades se obtuvieron con los catalizadores Co-mordenita, siguiendo en orden de actividad los catalizadores Co-Ferrierita y Co-ZSM-5. El catalizador Co-Mordenita más activo se ensayó con una mezcla reactiva donde predominó el NO en lugar del NO2 bajo condiciones secas e hidrotérmicas y en presencia de SO2. Con la adición de 8% de agua a la mezcla de reacción se observó desactivación reversible, especialmente a bajas temperaturas. La adición de 60 ppm de SO2 disminuyó la velocidad de reacción aproximadamente a la mitad debido posiblemente al envenenamiento de algunos sitios activos.

  16. Flexible optical fiber sensor based on polyurethane

    DEFF Research Database (Denmark)

    Kaysir, Md Rejvi; Stefani, Alessio; Lwin, Richard

    Polyurethane (PU) based hollow core fibers are investigated as optical sensors. The flexibility of PU fibers makes it suitable for sensing mechanical perturbations. We fabricated a PU fiber using the fiber drawing method, characterized the fiber and experimentally demonstrated a simple way...... to measure deformation, in the form of applied pressure....

  17. Training Package Implementation: Innovative and Flexible Approaches.

    Science.gov (United States)

    Meyers, Dave; Blom, Kaaren

    The implementation of training packages (TPs) in Australian workplaces was examined through case studies of the use of TPs in nontraditional trade areas by six innovative registered training organizations (RTOs) across Australia. The study focused on the extent to which new and flexible approaches to learning, training delivery, and assessment…

  18. NextFlex Flexible Hybrid Electronics Manufacturing

    Science.gov (United States)

    2016-10-01

    of the power of silicon and the economies and unique capabilities of printed circuitry to form a new class of devices for the Internet of Things (IoT...innovative medical devices that can take Processor* Display* Memory + Polymer Solar Cell # Flexible Substrate Sensors* Antenna #Thin Film Battery

  19. Flexible Communication Platform for Crisis Management

    OpenAIRE

    Jiří Barta; Tomáš Ludík; Jiří Urbánek

    2013-01-01

    Topics Disaster and Emergency Management are highly debated among experts. Fast communication will help to deal with emergencies. Problem is with the network connection and data exchange. The paper suggests a solution, which allows possibilities and perspectives of new flexible communication platform to the protection of communication systems for crisis management. This platform is used for everyday communication and communication in crisis situations too.

  20. Innovation in wearable and flexible antennas

    CERN Document Server

    Khaleel, Haider

    2014-01-01

    This book covers the design, numerical simulation, state of the art fabrication processes, qualitative and quantitative tests, and measurement techniques of wearable and flexible antennas of various topologies, such as: Printed Monopoles, Micropoles and Microstrips. It serves as a vital reference source for scientists and engineers in this field.

  1. Flexible biochips for detection of biomolecules

    NARCIS (Netherlands)

    Peter, M.; Schüler, T.; Furthner, F.; Rensing, P.A.; Heck, G.T. van; Schoo, H.F.M.; Möllier, R.; Fritzsche, W.; Breemen, A.J.J.M. van; Meinders, E.R.

    2009-01-01

    Miniaturization of biosensors is envisaged by the development of biochips consisting of parallel microarray patterns of binding sites on rigid substrates, such as glass or silicon. Thin plastic substrates are promising flexible alternatives because of the possibility for large-area roll-to-roll

  2. Docking to flexible nicotinic acetylcholine receptors

    DEFF Research Database (Denmark)

    Sander, Tommy; Bruun, Anne T; Balle, Thomas

    2010-01-01

    Computational docking to nicotinic acetylcholine receptors (nAChRs) and other members of the Cys-loop receptor family is complicated by the flexibility of the so-called C-loop. As observed in the large number of published crystal structures of the acetylcholine binding protein (AChBP), a structural...

  3. A Model for Flexibly Editing CSCL Scripts

    Science.gov (United States)

    Sobreira, Pericles; Tchounikine, Pierre

    2012-01-01

    This article presents a model whose primary concern and design rationale is to offer users (teachers) with basic ICT skills an intuitive, easy, and flexible way of editing scripts. The proposal is based on relating an end-user representation as a table and a machine model as a tree. The table-tree model introduces structural expressiveness and…

  4. Step growth of two flexible ABf monomers

    DEFF Research Database (Denmark)

    Cameron, Colin; Fawcett, Allan H.; Hetherington, Cecil R.

    2000-01-01

    A three-dimensional lattice model was used to simulate the competition between the growth of hyperbranched structures and cycle formation that occurs when flexible ABf monomers undergo step growth. The monomers in the model are mapped onto several lattice sites. The effect of functionality...

  5. Prevention of pulsations caused by flexible risers

    NARCIS (Netherlands)

    Belfroid S.P.C; Golliard, J.; Korst, H.J.C.

    2013-01-01

    In the last few decades, flexible risers have increasingly been used in the offshore oil and gas industry. In gas applications these risers can generate high amplitude tonal pressure fluctuations when the gas velocity reaches a threshold value. The resulting pressure fluctuations can then cause high

  6. Is labour market flexibility harmful to innovation?

    NARCIS (Netherlands)

    Kleinknecht, A.H.

    1998-01-01

    In a neoclassical framework one can argue that unemployment can be reduced by means of institutional changes that allow for a better working of the labour market and, notably, by achieving downward wage flexibility. I argue that although various policy recommendations about removing labour market

  7. Towards Flexibility in Academic Labour Markets?

    Science.gov (United States)

    Nieuwenhuysen, John

    1985-01-01

    It is argued that Australia's relatively uniform and consistent academic salary structure and personnel policies should be more flexible and competitive in order to alleviate current problems of academic labor market stagnation, uneven faculty distribution, and other results of financial stringency. (MSE)

  8. Labour Market Flexibility: Trends in Enterprises.

    Science.gov (United States)

    Organisation for Economic Cooperation and Development, Paris (France).

    Since the mid-1980s, the Organisation for Economic Cooperation and Development (OECD) has carried out a number of studies on the issues of labor market flexibility under the supervision of the Manpower and Social Affairs Committee and its Working Party on Industrial Relations. While much of the previous work focused on the external forms of labor…

  9. Flexible Adaptivity in AEHS Using Policies

    NARCIS (Netherlands)

    Koesling, Arne; Krause, Daniel; Herder, Eelco

    2008-01-01

    Koesling, A., Krause, D., & Herder, E. (2008). Flexible Adaptivity in AEHS Using Policies. In W. Nejdl, J. Kay, P. Pu & E. Herder (Eds.), Proceedings Adaptive Hypermedia and Adaptive Web-Based Systems 5th International Conference, AH 2008 (pp. 410-415). July 29-August, 1, 2008, Hannover, Germany:

  10. Flexibility and a Departmental Instructional Planning Model.

    Science.gov (United States)

    Miner, Norris

    The flexibility of an educational program, institution, or system can be described as the ability of the unit to absorb negative responses, such as reductions in funding or enrollments, and continue to function in a viable manner. One approach to adjustment to such reductions is to effect cuts in personnel, current, and equipment spending. This…

  11. Higher Education--The Flexible Employment Sector?

    Science.gov (United States)

    Scott, Jill; Ridgley, Clare; Spurgeon, Peter

    2003-01-01

    Explored the extent to which policies and practices promoting work-life balance (family friendly policies) have been taken up within the English higher education sector. Responses from 50 higher education institutions show that flexible working practices are more widespread than the formal policies of institutions would suggest. (SLD)

  12. Productivity and employee satisfaction in flexible workplaces

    NARCIS (Netherlands)

    van der Voordt, Theo

    2004-01-01

    In the early 1990s, a few organisations in the Netherlands began to experiment with flexible workplaces. Traditional cellular offices and the open‐plan offices or team‐oriented bullpen spaces in which everyone had their own fixed workplace were no longer a matter of course. Making use of modern

  13. Flexible frontiers for text division into rows

    Directory of Open Access Journals (Sweden)

    Dan L. Lacrămă

    2009-01-01

    Full Text Available This paper presents an original solution for flexible hand-written text division into rows. Unlike the standard procedure, the proposed method avoids the isolated characters extensions amputation and reduces the recognition error rate in the final stage.

  14. Mechanical properties of flexible knitted composites

    NARCIS (Netherlands)

    Haan, de J.; Peijs, A.A.J.M.

    1996-01-01

    This study investigates the influence of the matrix material and the degree of prestretch of a knitted fibre structure on the mechanical properties of knitted composites with low fibre volume fractions. By embedding a flexible textile structure in an elastomeric matrix, composite materials are

  15. Unsedated Flexible Upper Gastrointestinal Endoscopy: Need for ...

    African Journals Online (AJOL)

    Background: To determine the incidence of oxygen desaturation and whether routine oxygen monitoring is necessary during unsedated diagnostic flexible upper gastrointestinal endoscopy. Methods: A prospective study involving 54 consecutive in and out patients who had diagnostic upper gastrointestinal endoscopy at ...

  16. Flexible spin-orbit torque devices

    International Nuclear Information System (INIS)

    Lee, OukJae; You, Long; Jang, Jaewon; Subramanian, Vivek; Salahuddin, Sayeef

    2015-01-01

    We report on state-of-the-art spintronic devices synthesized and fabricated directly on a flexible organic substrate. Large perpendicular magnetic anisotropy was achieved in ultrathin ferromagnetic heterostructures of Pt/Co/MgO sputtered on a non-rigid plastic substrate at room temperature. Subsequently, a full magnetic reversal of the Co was observed by exploiting the spin orbit coupling in Pt that leads to a spin accumulation at the Pt/Co interface when an in-plane current is applied. Quasi-static measurements show the potential for operating these devices at nano-second speeds. Importantly, the behavior of the devices remained unchanged under varying bending conditions (up to a bending radius of ≈ ±20–30 mm). Furthermore, the devices showed robust operation even after application of 10 6 successive pulses, which is likely sufficient for many flexible applications. Thus, this work demonstrates the potential for integrating high performance spintronic devices on flexible substrates, which could lead to many applications ranging from flexible non-volatile magnetic memory to local magnetic resonance imaging

  17. Flexible spin-orbit torque devices

    Energy Technology Data Exchange (ETDEWEB)

    Lee, OukJae; You, Long; Jang, Jaewon; Subramanian, Vivek [Department of Electrical Engineering and Computer Sciences, University of California at Berkeley, Berkeley, California 94720 (United States); Salahuddin, Sayeef [Department of Electrical Engineering and Computer Sciences, University of California at Berkeley, Berkeley, California 94720 (United States); Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States)

    2015-12-21

    We report on state-of-the-art spintronic devices synthesized and fabricated directly on a flexible organic substrate. Large perpendicular magnetic anisotropy was achieved in ultrathin ferromagnetic heterostructures of Pt/Co/MgO sputtered on a non-rigid plastic substrate at room temperature. Subsequently, a full magnetic reversal of the Co was observed by exploiting the spin orbit coupling in Pt that leads to a spin accumulation at the Pt/Co interface when an in-plane current is applied. Quasi-static measurements show the potential for operating these devices at nano-second speeds. Importantly, the behavior of the devices remained unchanged under varying bending conditions (up to a bending radius of ≈ ±20–30 mm). Furthermore, the devices showed robust operation even after application of 10{sup 6} successive pulses, which is likely sufficient for many flexible applications. Thus, this work demonstrates the potential for integrating high performance spintronic devices on flexible substrates, which could lead to many applications ranging from flexible non-volatile magnetic memory to local magnetic resonance imaging.

  18. Making Professional Development Flexible: A Case Study.

    Science.gov (United States)

    Forsyth, Rachel

    2002-01-01

    Presents a case study of an online course that was designed for staff professional development at Manchester Metropolitan University (United Kingdom). Discusses the flexibility of online courses; course design; activities for short online workshops; evaluation methods for course evaluation; and results of participant questionnaires. (LRW)

  19. The Modelling of Axially Translating Flexible Beams

    Science.gov (United States)

    Theodore, R. J.; Arakeri, J. H.; Ghosal, A.

    1996-04-01

    The axially translating flexible beam with a prismatic joint can be modelled by using the Euler-Bernoulli beam equation together with the convective terms. In general, the method of separation of variables cannot be applied to solve this partial differential equation. In this paper, a non-dimensional form of the Euler Bernoulli beam equation is presented, obtained by using the concept of group velocity, and also the conditions under which separation of variables and assumed modes method can be used. The use of clamped-mass boundary conditions leads to a time-dependent frequency equation for the translating flexible beam. A novel method is presented for solving this time dependent frequency equation by using a differential form of the frequency equation. The assume mode/Lagrangian formulation of dynamics is employed to derive closed form equations of motion. It is shown by using Lyapunov's first method that the dynamic responses of flexural modal variables become unstable during retraction of the flexible beam, which the dynamic response during extension of the beam is stable. Numerical simulation results are presented for the uniform axial motion induced transverse vibration for a typical flexible beam.

  20. Functional flexibility good for skills development

    NARCIS (Netherlands)

    Houtman, I.L.D.

    2004-01-01

    Functional flexibility, making optimal use of the employee’s capacity to perform different tasks, is positively related to skills development and involvement in decision-making. It may lead to emotional exhaustion, however, if an imbalance exists, such as high job demands combined with a lack of

  1. A flexible infrared sensor for tissue oximetry

    DEFF Research Database (Denmark)

    Petersen, Søren Dahl; Thyssen, Anders; Engholm, Mathias

    2013-01-01

    We present a flexible infrared sensor for use in tissue oximetry with the aim of treating prematurely born infants. The sensor will detect the oxygen saturation in brain tissue through near infrared spectroscopy. The sensor itself consists of several individual silicon photo detectors fully...

  2. Can counter-stereotypes boost flexible thinking?

    NARCIS (Netherlands)

    Goclowska, M.A.; Crisp, R.J.; Labuschagne, K.

    2013-01-01

    To reduce prejudice psychologists design interventions requiring people to think of counter-stereotypes (i.e., people who defy stereotypic expectations—a strong woman, a Black President). Grounded in the idea that stereotypes constrain the ability to think flexibly, we propose that thinking of

  3. Biomass and biogas : potentials, efficiencies and flexibility

    NARCIS (Netherlands)

    Hofstede, Gert; Wouterse, Brian; Faber, Folkert; Nap, Jan Peter

    2012-01-01

    In the field of ‘renewable energy resources’ formation of biogas Biomass and biogas: potentials, efficiencies and flexibility is an important option. Biogas can be produced from biomass in a multistep process called anaerobic digestion (AD) and is usually performed in large digesters. Anaerobic

  4. Simulation of Flexible Objects in Robotics

    DEFF Research Database (Denmark)

    Fugl, Andreas Rune; Petersen, Henrik Gordon; Willatzen, Morten

    2012-01-01

    In this paper, we present what appears to be the first simulation model for grasping of flexible bodies based on the three-dimensional elastic constitutive relations and Newton's Second Law for solids known as the Navier-Cauchy equations. We give an overview of the most important equations for st...

  5. Flexible work and immigration in Europe

    NARCIS (Netherlands)

    Raess, D.; Burgoon, B.

    2015-01-01

    Immigration has risen substantially in many European economies, with far-reaching if still uncertain implications for labour markets and industrial relations. This article investigates such implications, focusing on employment flexibility, involving both ‘external flexibility’ (fixed-term or

  6. Parametric Analysis of Flexible Logic Control Model

    Directory of Open Access Journals (Sweden)

    Lihua Fu

    2013-01-01

    Full Text Available Based on deep analysis about the essential relation between two input variables of normal two-dimensional fuzzy controller, we used universal combinatorial operation model to describe the logic relationship and gave a flexible logic control method to realize the effective control for complex system. In practical control application, how to determine the general correlation coefficient of flexible logic control model is a problem for further studies. First, the conventional universal combinatorial operation model has been limited in the interval [0,1]. Consequently, this paper studies a kind of universal combinatorial operation model based on the interval [a,b]. And some important theorems are given and proved, which provide a foundation for the flexible logic control method. For dealing reasonably with the complex relations of every factor in complex system, a kind of universal combinatorial operation model with unequal weights is put forward. Then, this paper has carried out the parametric analysis of flexible logic control model. And some research results have been given, which have important directive to determine the values of the general correlation coefficients in practical control application.

  7. Relative Effects of Psychological Flexibility, Parental Involvement ...

    African Journals Online (AJOL)

    A critical analysis and understanding of secondary students' experiences and of safety in public schools are currently lacking in the literature and warrant further research. This study investigated the relative effects of psychological flexibility, parental involvement and school climate on secondary school student's school ...

  8. Flexible thin-film NFC tags

    NARCIS (Netherlands)

    Myny, K.; Tripathi, A.K.; Steen, J.L. van der; Cobb, B.

    2015-01-01

    Thin-film transistor technologies have great potential to become the key technology for leafnode Internet of Things by utilizing the NFC protocol as a communication medium. The main requirements are manufacturability on flexible substrates at a low cost while maintaining good device performance

  9. Experience With Flexible Hours of Work

    Science.gov (United States)

    Hartley, Jo

    1976-01-01

    A summary of an 80-page booklet called Hours of Work When Workers Can Choose is presented. The booklet reports a survey and focuses on the benefits of flexible hours of work. It was published by the Business and Professional Women's Foundation and is available from that organization. (EC)

  10. Printable Transparent Conductive Films for Flexible Electronics.

    Science.gov (United States)

    Li, Dongdong; Lai, Wen-Yong; Zhang, Yi-Zhou; Huang, Wei

    2018-03-01

    Printed electronics are an important enabling technology for the development of low-cost, large-area, and flexible optoelectronic devices. Transparent conductive films (TCFs) made from solution-processable transparent conductive materials, such as metal nanoparticles/nanowires, carbon nanotubes, graphene, and conductive polymers, can simultaneously exhibit high mechanical flexibility, low cost, and better photoelectric properties compared to the commonly used sputtered indium-tin-oxide-based TCFs, and are thus receiving great attention. This Review summarizes recent advances of large-area flexible TCFs enabled by several roll-to-roll-compatible printed techniques including inkjet printing, screen printing, offset printing, and gravure printing using the emerging transparent conductive materials. The preparation of TCFs including ink formulation, substrate treatment, patterning, and postprocessing, and their potential applications in solar cells, organic light-emitting diodes, and touch panels are discussed in detail. The rational combination of a variety of printed techniques with emerging transparent conductive materials is believed to extend the opportunities for the development of printed electronics within the realm of flexible electronics and beyond. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Cognitive Flexibility in Obsessive Compulsive Disorder

    DEFF Research Database (Denmark)

    Jónsson, Hjalti; Salkovskis, Paul M.

    BT for problems such as OCD requires a level of cognitive flexibility (that is the ability to take a different perspective on ones problems). It could be argued that problems in set shifting (by neuropsychological tests) might underpin problems in this area. Two assessments were used (1: perception...

  12. Flexible Processes in Project-Centred Learning

    NARCIS (Netherlands)

    Ceri, Stefano; Matera, Maristella; Raffio, Alessandro; Spoelstra, Howard

    2007-01-01

    Ceri, S., Matera, M., Raffio, A. & Spoelstra, H. (2007). Flexible Processes in Project-Centred Learning. In E. Duval, R. Klamma, and M. Wolpers (Eds.), European Conference on Technology Enhanced Learning, Lecture Notes in Computer Science, Vol. 4753, pp. 463-468. Berlin Heidelberg: Springer-Verlag

  13. Will Flexible Learning Raise Student Achievement?

    Science.gov (United States)

    Guest, Ross

    2005-01-01

    This paper presents both theoretical and survey evidence on the effect of flexible learning--in particular, the shift to a more student-centred approach to learning--on academic achievement by students. A survey was conducted of 577 business students at a major Australian university in order to elicit their preferences for academic achievement and…

  14. 76 FR 40208 - Regulatory Flexibility Agenda

    Science.gov (United States)

    2011-07-07

    ...: Yes. Agency Contact: Alicia Goldin, Division of Trading and Markets, Securities and Exchange... Analysis Required: Yes. Agency Contact: Alicia Goldin, Division of Trading and Markets, Securities and... Flexibility Analysis Required: Yes. Agency Contact: Alicia Goldin, Division of Trading and Markets, Securities...

  15. Variables socionutricionales de hogares mazahuas integrados por preescolares desnutridos con madres con obesidad y sin obesidad

    OpenAIRE

    Viridiana Vanessa Conzuelo-González

    2009-01-01

    El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria) entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un estud...

  16. Terapias alternativas con animales para niños con necesidades especiales

    OpenAIRE

    Cea-Chueca, Aihnoa

    2014-01-01

    El presente trabajo de fin de grado consiste en la realización de un análisis y descripción de la literatura acerca de las distintas terapias animales, destinadas a niños con necesidades especiales: cómo y por qué surgieron, en qué consisten las terapias, cómo podemos utilizarlas, etc. Las terapias alternativas con animales se conocen como una alternativa terapéutica, donde se utiliza a un animal como co-terapeuta para poder desarrollar diferentes capacidades de los niños con necesidades espe...

  17. Variables socionutricionales de hogares mazahuas integrados por preescolares desnutridos con madres con obesidad y sin obesidad

    OpenAIRE

    Viridiana Vanessa Conzuelo-González; Ivonne Vizcarra-Bordi

    2009-01-01

    El primer objetivo fue conocer cuántos menores de cinco años con diferentes grados de desnutrición tienen una madre con sobrepeso/obesidad/ en una comunidad indígena que vive en extrema pobreza y bajo condiciones de migración masculina internacional. El segundo fue comparar tres variables socionutricionales (ingreso familiar, educación de la madre y adecuación nutrimental de la dieta diaria) entre estos hogares y los hogares con desnutrición infantil y madres sin obesidad. Se realizó un est...

  18. Production Flexibility in Extensive Beef Farming Systems

    Directory of Open Access Journals (Sweden)

    Laura Astigarraga

    2011-03-01

    Full Text Available The aim of this work is to assess the flexibility of production allowed by extensive production conditions faced with variations in the environment, i.e., market variations and climatic fluctuations, of Limousin beef systems. The study used a case-based methodology in which seven beef farms with less than 1 LU/ha were chosen. Data collection was based on three interviews using a semistructured questionnaire and on the analysis of productive and economic results over a 15-year period (1991-2005. The main evolution of these farms is related to a rise in work productivity associated with an increase in herd size. Herd increase was made possible by enlarging the area, the margin of intensification being limited in these regions. To take advantage of the enlarged land area, females were reared for fattening or for reproduction instead of selling them at weaning. The Limousin female provides a wide product mix because of its plasticity, as has been studied by several researchers. This mix flexibility is achieved by delaying product differentiation, a form of production flexibility that can reduce the risk of under-producing or over-producing varied product configurations. On the other hand, calves sold to the Italian market after weaning are generic products, associated with a flexible production process to overcome fluctuations in forage availability due to climatic variations. The introduction of maize silage for feeding acts as an alternative route, actual and potential, through the system to overcome unexpected forage shortage from natural grasslands as a result of droughts. The study shows that extensive farming systems have developed types of flexibility to match different factors of uncertainty from the environment. Finally, the issue of farm system performance is thus not so much a question of whether a farm is fit at a specific moment in time, but whether it transforms into a less or more sustainable orientation.

  19. Towards automated visual flexible endoscope navigation.

    Science.gov (United States)

    van der Stap, Nanda; van der Heijden, Ferdinand; Broeders, Ivo A M J

    2013-10-01

    The design of flexible endoscopes has not changed significantly in the past 50 years. A trend is observed towards a wider application of flexible endoscopes with an increasing role in complex intraluminal therapeutic procedures. The nonintuitive and nonergonomical steering mechanism now forms a barrier in the extension of flexible endoscope applications. Automating the navigation of endoscopes could be a solution for this problem. This paper summarizes the current state of the art in image-based navigation algorithms. The objectives are to find the most promising navigation system(s) to date and to indicate fields for further research. A systematic literature search was performed using three general search terms in two medical-technological literature databases. Papers were included according to the inclusion criteria. A total of 135 papers were analyzed. Ultimately, 26 were included. Navigation often is based on visual information, which means steering the endoscope using the images that the endoscope produces. Two main techniques are described: lumen centralization and visual odometry. Although the research results are promising, no successful, commercially available automated flexible endoscopy system exists to date. Automated systems that employ conventional flexible endoscopes show the most promising prospects in terms of cost and applicability. To produce such a system, the research focus should lie on finding low-cost mechatronics and technologically robust steering algorithms. Additional functionality and increased efficiency can be obtained through software development. The first priority is to find real-time, robust steering algorithms. These algorithms need to handle bubbles, motion blur, and other image artifacts without disrupting the steering process.

  20. Régimen de producción flexible, mercado laboral y crisis subprime

    Directory of Open Access Journals (Sweden)

    Jorge Isauro Rionda Ramírez

    2013-03-01

    Full Text Available El presente trabajo persigue caracterizar el carácter y las características del régimen de producción flexible, así como tratar los efectos de este mismo esquema en la competitividad, en especial para las naciones en vías de desarrollo como lo es México, su nexo con el desarrollo global y la crisis de 2008. Para ello se compara el anterior esquema de producción rígido con el de Toyota estableciendo claras diferencias de cada uno y las ventajas que esto implica, de tal manera que el método es deductivo, donde las expresiones del fenómeno de estudio se ven desde el punto del vista del desarrollo capitalista central como periférico. Sus principales conclusiones indican el origen de la crisis sub prime es efecto de la implementación del régimen de producción flexible y problemas que ello implica.

  1. LA FORMACION DE LOS DOCENTES EN LA INTERVENCION CON ALUMNOS/AS CON DEFICIT DE ATENCION CON HIPERACTIVIDAD (TDAH

    Directory of Open Access Journals (Sweden)

    Francisco D. Fernández Martín

    2004-06-01

    Full Text Available La presencia del Trastorno por d.ficit de atención con hiperactividad (TDAH en algunos/as de nuestros/as alumnos/as ocasiona serios problemas para que estos/as se adapten al contexto escolar y sociofamiliar en el que se desenvuelven, debido a la presencia de una serie de dificultades: hiperactividad, dificultades para mantener la atenci.n, autorregular la conducta, controlarse, etc.

  2. Esporotricosis cutánea diseminada con compromiso articular en una mujer con diabetes tipo 2

    Directory of Open Access Journals (Sweden)

    Sendy Solorzano

    Full Text Available La esporotricosis diseminada es una presentación infrecuente de esta micosis. Aunque ha sido descrita en sujetos inmunocompetentes, con frecuencia existe compromiso de la inmunidad mediada por células T. Reportamos el caso de una mujer con diabetes tipo 2 no controlada que desarrolló esporotricosis cutánea diseminada. El curso de la enfermedad presentó varias complicaciones que incluyeron hepatitis secundaria a itraconazol y artritis de la rodilla con cultivo positivo para Sporothrix schenckii durante el tratamiento con solución saturada de ioduro de potasio. La discusión del caso incluye aspectos de la patogénesis de la esporotricosis diseminada y el manejo de la infección y sus complicaciones.

  3. Riesgo familiar total en familias con mujeres diagnosticadas con neoplasia de mama

    Directory of Open Access Journals (Sweden)

    Nancy Cecilia Charrys-Bravo

    2017-07-01

    Full Text Available Objetivo: Determinar el riesgo familiar total de las familias con mujeres diagnosticadas con cáncer de mama, que asisten a un centro de salud oncológico en la ciudad de Barranquilla. Materiales y Métodos: El estudio fue de tipo descriptivo, transversal con abordaje cuantitativo. Se utilizó el instrumento Riesgo Familiar Total RFT 5-33. El universo estuvo conformado por familias con mujeres diagnosticadas con cáncer en mama. La muestra fue de 41 familias que integraron a 154 miembros; se abordó el estudio de manera censal, y no por medio de una muestra, porque el acceso a la información de la totalidad de las familia fue viable. Resultados: Los resultados mostraron que las familias, en su mayoría, son de tipo 2. El 68 % de las pacientes categorizan sus familias como amenazadas, el 5 % como familias de alto riesgo y un 27 % de las familias con un bajo riesgo. Conclusiones: Los hallazgos encontrados en esta investigación son importantes para las familias, lo cual permitirá establecer acciones y actividades que logren orientar e implementar procesos de atención específicos con el propósito de cuidar a las familias para que se mantengan sanos en un nivel de bajo riesgo; además, desarrollar controles y seguimiento a aquellas familias que se encuentran en un riesgo alto de amenazas, mediante acciones de promoción y prevención de la enfermedad de una manera amplia. Por lo anterior, se deben emprender programas más agresivos de prevención y promoción, especialmente con las familias que asisten en busca de apoyo médico para este padecimiento; de esta forma, se podrán diagnosticar los casos de forma temprana y proceder al respectivo tratamiento.

  4. Materiales nanocumpuestos basados en LDPE relleno con nanotubos de carbono con potenciales propiedades bactericidas

    OpenAIRE

    Benigno Escribano, Erika

    2015-01-01

    En este trabajo, se ha seleccionado como material de estudio polietileno de baja densidad, LDPE, ya que es un polímero con múltiples aplicaciones en diversos campos. Se busca como objetivo principal, preparar y caracterizar nuevos materiales basados en LDPE con potenciales propiedades antibacterianas. Para ello, se van a estudiar dos posibles maneras de conseguirlo: La primera de ellas, consiste en realizar un procesado mecánico sobre el polietileno, concretamente, una molienda del alta en...

  5. Three-dimensional formulation of rigid-flexible multibody systems with flexible beam elements

    International Nuclear Information System (INIS)

    Garcia-Vallejo, D.; Mayo, J.; Escalona, J. L.; Dominguez, J.

    2008-01-01

    Multibody systems generally contain solids with appreciable deformations and which decisively influence the dynamics of the system. These solids have to be modeled by means of special formulations for flexible solids. At the same time, other solids are of such a high stiffness that they may be considered rigid, which simplifies their modeling. For these reasons, for a rigid-flexible multibody system, two types of formulations coexist in the equations of the system. Among the different possibilities provided in the literature on the material, the formulation in natural coordinates and the formulation in absolute nodal coordinates are utilized in this paper to model the rigid and flexible solids, respectively. This paper contains a mixed formulation based on the possibility of sharing coordinates between a rigid solid and a flexible solid. The global mass matrix of the system is shown to be constant and, in addition, many of the constraint equations obtained upon utilizing these formulations are linear and can be eliminated

  6. Optimized flexible cover films for improved conversion efficiency in thin film flexible solar cells

    Science.gov (United States)

    Guterman, Sidney; Wen, Xin; Gudavalli, Ganesh; Rhajbhandari, Pravakar; Dhakal, Tara P.; Wilt, David; Klotzkin, David

    2018-05-01

    Thin film solar cell technologies are being developed for lower cost and flexible applications. For such technologies, it is desirable to have inexpensive, flexible cover strips. In this paper, we demonstrate that transparent silicone cover glass adhesive can be doped with TiO2 nanoparticles to achieve an optimal refractive index and maximize the performance of the cell. Cells covered with the film doped with nanoparticles at the optimal concentration demonstrated a ∼1% increase in photocurrent over the plain (undoped) film. In addition, fused silica beads can be incorporated into the flexible cover slip to realize a built-in pseudomorphic glass diffuser layer as well. This additional degree of freedom in engineering flexible solar cell covers allows maximal performance from a given cell for minimal increased cost.

  7. Considerations of device and operational flexibility in FER

    International Nuclear Information System (INIS)

    Sugihara, Masayoshi; Miki, Nobuharu; Nishio, Satoshi; Yamada, Masao; Yamamoto, Shin

    1988-01-01

    Expected physics uncertainties in DT burning plasma of FER, which may not be removed completely at the start of construction or DT operation, are reviewed. Several possible device and operational flexibility scenarios to cope with these uncertainties are considered. They are (1) Plasma size enlargement scenario, (2) Plasma shape flexibility scenario, (3) Heating/Current drive/Control system flexibility scenario, (4) Impurity control system flexibility scenario and (5) Advanced operation scenario. Feasibility of these flexibility scenarios are examined and shown to be practicable. However, careful assessment of the physics data base is necessary at the start of construction and DT operation to proceed to actually implement these flexibilities in FER. (author)

  8. [Inspecting the cochlear scala tympanic with flexible and semi-flexible micro-endoscope].

    Science.gov (United States)

    Zhang, Daoxcing; Zhang, Yankun

    2006-02-01

    Flexible and semi-flexible micro-endoscopes were used in cochlear scala tympani inspection , to explore their application in inner ear examination. Fifteen profound hearing loss patients preparing for cochlear implant were included in this study. During the operation, micro-endoscopy was performed after opening the cochlear scala tympani. And 1 mm diameter semi-flexible micro-endoscope could go as deep as 9 mm into the cochlear scala tympani, while 0. 5 mm diameter flexible micro-endoscope could go as deep as 25 mm. The inspecting results were compared with video recording. Using 0.5 mm flexible micro-endoscope, we canould check cochlear scala tympani with depth range of 15-25 mm, but the video imaging was not clear enough to examine the microstructure in the cochlear. With 1 mm diameter semi-flexible micro-endoscope, we could reach 9 mm deep into the cochlear. During the examination, we found 3 cases with calcification deposit in osseous spiral lamina, l case with granulation tissue in the lateral wall of scala tympani, no abnormal findings in the other 11 cases. Inspecting the cochlear scala tympani with 0.5 mm flexible micro-endoscope, even though we can reach the second circuit of the cochlear, it is difficult to find the pathology in the cochlear because of the poor video imaging. With 1 mm semi-flexible micro-endoscope, we can identify the microstructure of the cochlear clearly and find the pathologic changes, but the inserting depth was limited to 9 mm with limitation to examine the whole cochlear.

  9. Flexible MEMS: A novel technology to fabricate flexible sensors and electronics

    Science.gov (United States)

    Tu, Hongen

    This dissertation presents the design and fabrication techniques used to fabricate flexible MEMS (Micro Electro Mechanical Systems) devices. MEMS devices and CMOS(Complementary Metal-Oxide-Semiconductor) circuits are traditionally fabricated on rigid substrates with inorganic semiconductor materials such as Silicon. However, it is highly desirable that functional elements like sensors, actuators or micro fluidic components to be fabricated on flexible substrates for a wide variety of applications. Due to the fact that flexible substrate is temperature sensitive, typically only low temperature materials, such as polymers, metals, and organic semiconductor materials, can be directly fabricated on flexible substrates. A novel technology based on XeF2(xenon difluoride) isotropic silicon etching and parylene conformal coating, which is able to monolithically incorporate high temperature materials and fluidic channels, was developed at Wayne State University. The technology was first implemented in the development of out-of-plane parylene microneedle arrays that can be individually addressed by integrated flexible micro-channels. These devices enable the delivery of chemicals with controlled temporal and spatial patterns and allow us to study neurotransmitter-based retinal prosthesis. The technology was further explored by adopting the conventional SOI-CMOS processes. High performance and high density CMOS circuits can be first fabricated on SOI wafers, and then be integrated into flexible substrates. Flexible p-channel MOSFETs (Metal-Oxide-Semiconductor Field-Effect-Transistors) were successfully integrated and tested. Integration of pressure sensors and flow sensors based on single crystal silicon has also been demonstrated. A novel smart yarn technology that enables the invisible integration of sensors and electronics into fabrics has been developed. The most significant advantage of this technology is its post-MEMS and post-CMOS compatibility. Various high

  10. Rabdomiolisis asociada al tratamiento con valaciclovir

    Directory of Open Access Journals (Sweden)

    Héctor Enríquez Gómez

    2012-03-01

    Full Text Available La rabdomiolisis es un efecto secundario asociado a un buen número de fármacos, entre ellos los antivirales. Describimos un caso de rabdomiolisis secundaria a valaciclovir, efecto no descrito anteriormente en laliteratura, en un contexto clínico muy especial. Se trata de un varón queingresa por un golpe de calor secundario a la realización de ejercicio físicoextremo. Durante su ingreso se comienza tratamiento con valaciclovir porun herpes nasolabial, observándose en los días siguientes una marcadaelevación de las cifras de CPK que desaparece con la suspensión del mismo. Proponemos, por tanto, que ante la administración de valaciclovir ensituaciones que puedan comportar daño mitocondrial habría que realizarmonitorización estrecha de los niveles de CPK

  11. Experiencias y aprendizajes con juegos cooperativos

    Directory of Open Access Journals (Sweden)

    Evelyn Cerdas Agüero

    2013-03-01

    Full Text Available El presente trabajo tiene como objetivo presentar experiencias y aprendizajes que  han logrado algunos grupos de docentes con los que se ha trabajado por medio de talleres de juegos cooperativos para la paz. Los talleres se han facilitado desde la actividad de extensión Aula Activa: juegos cooperativos para la Educación para la Paz que se ha implementado en el  Instituto de Estudios Latinoamericanos (IDELA desde el 2006. En este trabajo  nos enfocamos en el trabajo con docentes del Ministerio de Educación Pública (MEP de Costa Rica, proceso que deja una serie de aprendizajes actitudinales, de valores, habilidades y cognocitivos.

  12. Factores asociados con la compacidad final de los concretos asfálticos

    Directory of Open Access Journals (Sweden)

    Jorge Tamayo T.

    1982-09-01

    Full Text Available Se reconoce universalmente el alto grado de dependencia de las propiedades fundamentales que exhiben las capas de concreto asfáltico con su nivel de compacidad, por lo cual resulta importante estudiar los aspectos principales asociados con la optimización de esta característica. Resulta particularmente importante conocer las propiedades de los agregados en cuanto a su naturaleza, distribución granulométrica, tipo de llenante, forma de las partículas, así como las del asfalto en función de su comportamiento reológico y las relaciones entre estos ingredientes. En razón de la naturaleza termoplástica de las mezclas asfálticas, el control de la temperatura y la evolución de la misma por medio de las diversas fases del proceso, resulta determinante en la compacidad final. Otros factores igualmente incidentes son: la programación racional de las actividades, los equipos empleados y la secuencia de la compactación. Este documento pretende presentar algunas ideas sobre estos aspectos que permiten mejorar las prácticas constructivas existentes con miras a optimizar el comportamiento de los pavimentos flexibles.

  13. Comunicándonos con las cosas

    Directory of Open Access Journals (Sweden)

    Miguel Delgado

    2009-09-01

    Full Text Available Tras la Web 2.0 y gracias a la colaboración entre las personas, Internet sigue creciendo y evolucionando, pero esta vez a través de los objetos. La siguiente evolución pretende que las personas puedan interactuar con las cosas de una forma inteligente mediante tecnologías ampliamente utilizadas como el teléfono móvil e Internet, y tecnologías que permitan etiquetar objetos.

  14. Bacteriemia en pacientes internados con celulitis

    Directory of Open Access Journals (Sweden)

    Juan S. Lasa

    2012-08-01

    Full Text Available La celulitis es una inflamación aguda de la dermis y tejido celular subcutáneo de causa bacteriana, que generalmente complica a heridas, úlceras y dermatosis, aunque de manera frecuente no existe sitio de entrada. Se recomienda la realización de cultivo de punción de piel y partes blandas (PPB. Los hemocultivos raramente dan resultados positivos. El objetivo de este trabajo fue determinar la prevalencia de bacteriemia en pacientes internados en nuestra institución con diagnóstico de celulitis. Se analizaron retrospectivamente los registros clínicos de los pacientes con este diagnóstico al ingreso entre junio de 2007 y marzo de 2010. Se evaluaron los datos poblacionales, presencia de comorbilidades, y resultados de los cultivos. En ese período, se internaron 140 pacientes con diagnóstico de celulitis y a todos ellos se les realizó hemocultivo y cultivos de PPB. Setenta y cuatro eran varones (52.8%. La edad promedio: 47.5 ± 19.7 años (rango 16-94. El 40% tuvo cultivos positivos de PPB, en los que el Staphylococcus aureus meticilino resistente (SAMR fue el germen más frecuentemente aislado (35.7%; la prevalencia de bacteriemia fue del 8.6%, en donde el germen más frecuente fue Streptoccocus Beta hemolítico, grupo G (33% del total de hemocultivos positivos. La bacteriemia se asoció significativamente a mayor estadía hospitalaria (10.5 ± 8.9 vs. 4.9 ± 6, p = 0.004. Se asoció con mayor riesgo de hemocultivo positivo a ser diabético, tener cultivo de PPB positivo, consumo de alcohol y/o enfermedad pulmonar obstructiva crónica.

  15. ORIENTACIONES CURRICULARES CON EL ENFOQUE CTS

    Directory of Open Access Journals (Sweden)

    Miguel Corchuelo

    2010-11-01

    Full Text Available Considerando que el propósito de la educación con un enfoque CTS propende por abordar problemas contextualizados socialmente, se busca construir una propuesta desde la práctica, con el fi n de fortalecer la formación para la participación ciudadana. Encontramos que abordar el tratamiento de las relaciones entre deporte, nutrición humana y motricidad convierte al cuerpo humano en un objeto de estudio vigente. En la ciudad de Popayán (Cauca, Colombia se vive una de las más altas tasas de bulimia y anorexia en adolescentes del país, al igual que de consumo de drogas ilícitas. Además, el bajo rendimiento de los deportistas caucanos en los últimos Juegos Nacionales, los casos de dopaje en atletas olímpicos, entre otros, abre interrogantes sobre la formación integral de nuestros estudiantes. Con el fi n de acercar la escuela a estas problemáticas locales y nacionales, se asume un trabajo interdisciplinario basado en la resolución de problemas socialmente relevantes. En esta oportunidad compartiremos los resultados del camino recorrido en torno a la pregunta: “El deporte: ¿emancipación o alienación?”.

  16. Aprendiendo química con golosinas

    Directory of Open Access Journals (Sweden)

    José Manuel Rodríguez Rodríguez

    2011-01-01

    Full Text Available Las golosinas (caramelos, chicles, nubes, palotes, papas fritas, etc. nos gustan a casi todos y gozan de una imagen positiva, a pesar de sus efectos secundarios si no se consumen con moderación. Aprovechándonos de esa buena imagen y de la gran variedad de golosinas que existen en el mercado, hemos diseñado una serie de experimentos con los que podemos explicar distintos tipos de reacciones químicas (ácido-base, oxidación reducción, endotérmicas¿, la actuación de un indicador e, incluso, podemos comparar cantidades de vitamina C. En todas las actividades se persigue explicar algún aspecto de la Química que, en general, el público desconoce, captando su atención, por ejemplo, mediante cambios de color espectaculares y con las golosinas como protagonistas. Así mismo, estas experiencias pueden emplearse como recursos didácticos para alumnos de 4º E.S.O. y Bachillerato, apoyando los contenidos teóricos del currículum.

  17. Flexible Piezoelectric Sensor-Based Gait Recognition

    Directory of Open Access Journals (Sweden)

    Youngsu Cha

    2018-02-01

    Full Text Available Most motion recognition research has required tight-fitting suits for precise sensing. However, tight-suit systems have difficulty adapting to real applications, because people normally wear loose clothes. In this paper, we propose a gait recognition system with flexible piezoelectric sensors in loose clothing. The gait recognition system does not directly sense lower-body angles. It does, however, detect the transition between standing and walking. Specifically, we use the signals from the flexible sensors attached to the knee and hip parts on loose pants. We detect the periodic motion component using the discrete time Fourier series from the signal during walking. We adapt the gait detection method to a real-time patient motion and posture monitoring system. In the monitoring system, the gait recognition operates well. Finally, we test the gait recognition system with 10 subjects, for which the proposed system successfully detects walking with a success rate over 93 %.

  18. Flexible management: strategies for the changing workforce.

    Science.gov (United States)

    Michaels, B

    1994-01-01

    In the year 2000, managers will supervise employees whose career aspirations differ drastically from their own. Success not only will be measured by salary and status, but will be tied to a person's family relationships. Twenty years ago, most managers were not concerned with the family problems of their subordinates. This notion is now out of date. The family responsibilities of staff have a direct effect on the company's productivity. An employee who is worried about the care of an elderly parent, or concerned with the safety of a preteen home alone after school, is unlikely to give full attention to the task at hand. Flexible management is a cost-effective way of dealing with these issues. Managers who have the skills to be flexible and the strategies to work with employees for a win-win situation will reduce distractions and tardiness and gain productivity and loyalty.

  19. Industrial Mining's flexibility aids in customer satisfaction

    Energy Technology Data Exchange (ETDEWEB)

    1985-08-01

    Mining flexibility and customer specification keeps Industrial Mining of Youngstown, Ohio competitive in a tough environment. The company fills the needs of the small customer who requires a special blend or sized product. Industrial Mining works terrain that was uneconomical to mine before but is now profitable. Draglines and mobile equipment are used for overburden removal for economical and flexible mining with most mining by the contour method. Industrial Mining's preparation plant was constructed in 1979 to enable the company to wash and screen different stoker products and utility coal with a modern on-site lab a quality product can be constantly maintained. A wheel loader is used to feed the hopper from selective stockpiles and this allows blending on the raw side or within the plant.

  20. A screen-printed flexible flow sensor

    International Nuclear Information System (INIS)

    Moschos, A; Kaltsas, G; Syrovy, T; Syrova, L

    2017-01-01

    A thermal flow sensor was printed on a flexible plastic substrate using exclusively screen-printing techniques. The presented device was implemented with custom made screen-printed thermistors, which allows simple, cost-efficient production on a variety of flexible substrates while maintaining the typical advantages of thermal flow sensors. Evaluation was performed for both static (zero flow) and dynamic conditions using a combination of electrical measurements and IR imaging techniques in order to determine important characteristics, such as temperature response, output repeatability, etc. The flow sensor was characterized utilizing the hot-wire and calorimetric principles of operation, while the preliminary results appear to be very promising, since the sensor was successfully evaluated and displayed adequate sensitivity in a relatively wide flow range. (paper)

  1. Flexible work schedules, older workers, and retirement.

    Science.gov (United States)

    Siegenthaler, J K; Brenner, A M

    2000-01-01

    Older workers in the United States indicate that they would prefer flexible work arrangements rather than abrupt retirement, yet management has done very little to make this possible. A review of two bodies of literature from the late 1980s is presented: social science writings including sociological, gerontological, and economic literature, and business and management literature. There is a clash between the way jobs are traditionally scheduled and the needs of growing numbers of older workers. Workers continue to be subject to obstacles to phased retirement due to the structuring of health care and pension benefits, downsizing, organizational inflexibility, and "corporate culture." Thus, general views among social scientists regarding the desirability of flexible schedules toward retirement will not produce real changes unless management becomes committed to such changes and they are securely embedded in company policies.

  2. Procedural Optimization Models for Multiobjective Flexible JSSP

    Directory of Open Access Journals (Sweden)

    Elena Simona NICOARA

    2013-01-01

    Full Text Available The most challenging issues related to manufacturing efficiency occur if the jobs to be sched-uled are structurally different, if these jobs allow flexible routings on the equipments and mul-tiple objectives are required. This framework, called Multi-objective Flexible Job Shop Scheduling Problems (MOFJSSP, applicable to many real processes, has been less reported in the literature than the JSSP framework, which has been extensively formalized, modeled and analyzed from many perspectives. The MOFJSSP lie, as many other NP-hard problems, in a tedious place where the vast optimization theory meets the real world context. The paper brings to discussion the most optimization models suited to MOFJSSP and analyzes in detail the genetic algorithms and agent-based models as the most appropriate procedural models.

  3. Supermarket Defrost Cycles As Flexible Reserve

    DEFF Research Database (Denmark)

    Pedersen, Rasmus; Sloth, Christoffer; Wisniewski, Rafal

    2015-01-01

    This work analyses how supermarket defrost cycles can be used as flexible reserve in a smart grid context. The consumption flexibility originates from being able to shift defrost cycles in time, while adhering to the underlying refrigeration systems constraints. It is shown how this time...... constrained behavior can be modeled and used by a defrost planner to optimally schedule defrost start times for several defrost cycles, according to electricity price. Because the defrost planning problem is a boolean programming problem a method of relaxing it is proposed. While the relaxed problem requires...... less computational effort, convexity is dependent on properties of the price signal. Simulation study show that the optimal planning strategy can reduce cost of defrost cycles with 31.7%, compared to a current strategy of executing all defrost cycles at the same time each day. Copyright ©2015 by IEEE...

  4. Flexible Software Process Lines in Practice

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Ternité, Thomas; Friedrich, Jan

    2016-01-01

    Process flexibility and adaptability is a frequently discussed topic in literature, and several approaches propose techniques to improve and optimize software processes for a given organization- or project context. A software process line (SPrL) is an instrument to systematically construct...... that can be adapted to the respective context. In this article, we present an approach to construct flexible software process lines and show its practical application in the German V-Modell XT. The presented approach emerges from a 10-year research endeavor and was used to enhance the metamodel of the V......-Modell XT and to allow for improved process variability and lifecycle management. Practical dissemination and complementing empirical research show the suitability of the concept. We therefore contribute a proven approach that is presented as metamodel fragment for reuse and implementation in further...

  5. Varying flexibilities in systems of organised decentralisation

    DEFF Research Database (Denmark)

    Ilsøe, Anna; Andersen, Søren Kaj

    to unbalanced trade offs. In Denmark the strong decentralisation combined with a lacking demand on +/- hours limits for time banks without reference periods seems to impose risks for certain groups of employees who, regardless of company size, can have extraordinary long working hours violating the 48-hour rule......There seems to be a paradox: The use of flexible working hours (i.e. variable hours) is more widespread in Germany than in Denmark, yet at the same time the discussion on the need for further flexibilisation of working hours is also more prevalent in Germany than in Denmark. In order to answer...... the framework agreements on variable hours are specified, is more decentralised in Denmark and allows an adjustment of working time closer to the single employee. 2) Both in the German and Danish metal sectors company-based agreements regulate the growing use of flexible working hours. Though the trade union...

  6. Analysis of flexible structures under lateral impact

    International Nuclear Information System (INIS)

    Ramirez, D. F.; Razavi, H.

    2012-01-01

    Three methods for analysis of flexible structures under lateral impact are presented. The first proposed method (Method A) consists of: (1) modifying an available deceleration on a rigid target with conservation principles to account for structural flexibility; and (2) transient nonlinear analysis of the structure with the corrected forcing function. The second proposed method (Method B) is similar to Method A in obtaining the forcing function but it solves the equations of motion of an idealized two-degree-of-freedom system instead of directly using conservation principles. The last method simply provides the maximum force in the structure using the conservation of energy and linear momentum. A coupled simulation is also performed in LS-DYNA and compared against the proposed methods. A case study is presented to illustrate the applicability of all three methods and the LS-DYNA simulation. (authors)

  7. Calidad de vida, satisfacción con el tratamiento y bienestar emocional en pacientes con diabetes LADA

    OpenAIRE

    Granado Casas, Minerva

    2014-01-01

    Introducción: La calidad de vida, satisfacción con el tratamiento y bienestar emocional en pacientes con diabetes mellitus están relacionados con el control metabólico, las complicaciones y algunas variables socioeconómicas. Actualmente, no existe ningún estudio científico que analice la calidad de vida, satisfacción con el tratamiento y bienestar emocional en pacientes con diabetes LADA. Objetivos: Los objetivos principales fueron conocer la calidad de vida, satisfacción con el tratamient...

  8. Flexible Supercapacitors Based on Carbon Nanomaterials

    Science.gov (United States)

    2014-02-26

    spray-coated directly onto either exible nonconductive substrates (e.g., plastic lm, cellulose paper, and office paper) as both the current electrode...1D carbon nanotubes, 2D graphene, and 3D mesoporous carbon, are promising as electrode materials for flexible supercapacitors due to their extremely...H2SO4 gels) between positive/negative electrodes supported with exible plastic substrates (e.g., polydimethylsi- loxane, PDMS).34–36 Unlike

  9. Flexible strip supercapacitors for future energy storage

    OpenAIRE

    Zhang, R-R; Xu, Y-M; Harrison, D; Fyson, J; Qiu, F-L; Southee, D

    2015-01-01

    Flexible strip supercapacitors are developed and their electrochemical properties are characterized. Activated carbon is used as the electrode material and it is found to have a good porous structure which provides a large surface area for energy storage. Furthermore, this activated carbon performs well. The manufacturing processes for the supercapacitors are described in detail and the preparation process has good reproducibility. The strip supercapacitors are combined in series and parallel...

  10. Poly(Lactic Acid) Based Flexible Films

    OpenAIRE

    Fathilah binti Ali; Jamarosliza Jamaluddin; Arun Kumar Upadhyay

    2014-01-01

    Poly(lactic acid) (PLA) is a biodegradable polymer which has good mechanical properties, however, its brittleness limits its usage especially in packaging materials. Therefore, in this work, PLA based polyurethane films were prepared by synthesizing with different types of isocyanates; methylene diisocyanate (MDI) and hexamethylene diisocyanates (HDI). For this purpose, PLA based polyurethane must have good strength and flexibility. Therefore, polycaprolactone which has b...

  11. Simulating charge transport in flexible systems

    Directory of Open Access Journals (Sweden)

    Timothy Clark

    2015-12-01

    Full Text Available Systems in which movements occur on two significantly different time domains, such as organic electronic components with flexible molecules, require different simulation techniques for the two time scales. In the case of molecular electronics, charge transport is complicated by the several different mechanisms (and theoretical models that apply in different cases. We cannot yet combine time scales of molecular and electronic movement in simulations of real systems. This review describes our progress towards this goal.

  12. A More Flexible Lipoprotein Sorting Pathway

    Science.gov (United States)

    Chahales, Peter

    2015-01-01

    Lipoprotein biogenesis in Gram-negative bacteria occurs by a conserved pathway, each step of which is considered essential. In contrast to this model, LoVullo and colleagues demonstrate that the N-acyl transferase Lnt is not required in Francisella tularensis or Neisseria gonorrhoeae. This suggests the existence of a more flexible lipoprotein pathway, likely due to a modified Lol transporter complex, and raises the possibility that pathogens may regulate lipoprotein processing to modulate interactions with the host. PMID:25755190

  13. Flexible feature interface for multimedia sources

    Science.gov (United States)

    Coffland, Douglas R [Livermore, CA

    2009-06-09

    A flexible feature interface for multimedia sources system that includes a single interface for the addition of features and functions to multimedia sources and for accessing those features and functions from remote hosts. The interface utilizes the export statement: export "C" D11Export void FunctionName(int argc, char ** argv,char * result, SecureSession *ctrl) or the binary equivalent of the export statement.

  14. A bimodal flexible distribution for lifetime data

    OpenAIRE

    Ramires, Thiago G.; Ortega, Edwin M. M.; Cordeiro, Gauss M.; Hens, Niel

    2016-01-01

    A four-parameter extended bimodal lifetime model called the exponentiated log-sinh Cauchy distribution is proposed. It extends the log-sinh Cauchy and folded Cauchy distributions. We derive some of its mathematical properties including explicit expressions for the ordinary moments and generating and quantile functions. The method of maximum likelihood is used to estimate the model parameters. We implement the fit of the model in the GAMLSS package and provide the codes. The flexibility of the...

  15. Rapid Slewing of Flexible Space Structures

    Science.gov (United States)

    2015-09-01

    maneuvers while minimizing the impact of flexible motion. An antenna must point at its targets with a certain degree of accuracy to ensure link...of mass 1 due to force 1 is greatly impacted by mode 1, especially in the low frequency range. This is because the magnitudes of mode 2 and mode 3...mass 1). See responses for H12 and H13 in Figure 14. Figure 14. Impulse responses, h jk t( ) , for system in Figure 10. 53 The residue

  16. Flexible architecture of inducible morphological plasticity.

    Science.gov (United States)

    Kishida, Osamu; Nishimura, Kinya

    2006-05-01

    1. Predator-induced morphological defences are produced in response to an emergent predator regime. In natural systems, prey organisms usually experience temporal shifting of the composition of the predator assemblage and of the intensity of predation risk from each predator species. Although, a repetitive morphological change in response to a sequential shift of the predator regime such as alteration of the predator species or diminution of the predation risk may be adaptive, such flexible inducible morphological defences are not ubiquitous. 2. We experimentally addressed whether a flexible inducible morphological defence is accomplished in response to serial changes in the predation regime, using a model prey species which adopt different defensive morphological phenotypes in response to different predator species. Rana pirica (Matsui) tadpoles increased body depth and tail depth against the predatory larval salamander Hynobius retardatus (Dunn); on the other hand, they only increased tail depth against the predatory larval dragonfly Aeshna nigroflava (Martin). 3. Rana pirica tadpoles with the predator-specific phenotypes were subjected to removal or exchange of the predator species. After removal of the predator species, tadpoles with each predator-specific phenotype changed their phenotype to the nondefensive basic one, suggesting that both predator-specific phenotypes are costly to maintain. After an exchange of the predator species, tadpoles with each predator-specific phenotype reciprocally, flexibly shifted their phenotype to the now more suitable predator-specific one only by modifying their body part. The partial modification can effectively reduce time and energy expenditures involved in repetitive morphological changes, and therefore suggest that the costs of the flexible morphological changes are reduced.

  17. "Sonríe con salud"

    Directory of Open Access Journals (Sweden)

    Rosa María González Ramos

    Full Text Available Introducción: los programas educativos juegan un papel importante ya que permiten modificar hábitos y conductas perjudiciales para la salud. Las personas de la tercera edad deben adquirir los conocimientos necesarios para realizar el auto cuidado de la salud bucal mejorando así su calidad de vida. Objetivo: evaluar los resultados del programa "Sonríe con salud". Métodos: se realizó una investigación descriptiva de corte transversal, con un universo de 74 personas de 60 años y más. Las variables estudiadas fueron: la edad, sexo. Se aplicó una encuesta. Las respuestas se agruparon atendiendo a si poseían o no, conocimientos acerca de la relación entre salud bucal y salud general, las principales enfermedades buco-dentales, realización del autoexamen bucal, efecto del tabaquismo y alcoholismo, ingestión de los alimentos azucarados, calientes, picantes y la importancia de la higiene bucal. La recolección de la información, la realizaron los autores empleando como fuente primaria el cuestionario aplicado en la primera etapa de la investigación. Se utilizaron los valores absolutos y el porcentaje en el análisis de los resultados. Resultados: el grupo de edad de 70 a 79 años fueron los más representados (36,5 % y el sexo femenino con un 59,5 %. Se elevaron los conocimientos relacionados con el efecto perjudicial del alcoholismo al 91,9 % y el tabaquismo al 95,9 %; acerca de la ingestión de alimentos azucarados se elevan al 97,7 % al igual que los alimentos calientes y picantes en un 90,5 %, relativo al autoexamen bucal se superan los conocimientos de su realización al 78,4 % y referente a la higiene bucal se elevan al 91,9 %. Conclusiones: el programa educativo "sonríe con salud" resultó eficaz, al elevar el nivel de conocimientos de los ancianos que recibieron las actividades previstas en el programa.

  18. Research for improved flexible tactile sensor sensitivity

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Hae Yong; Kim, Ho Chan [Andong National University, Andong (Korea, Republic of); Lee, In Hwan [Chungbuk National University, Chungju (Korea, Republic of)

    2015-11-15

    With the development of robotic technologies, in recent years these technologies have been applied to multidisciplinary fields of study. To operate similarly to a human being, many robot technologies require devices that can receive exterior stimulus, temperature, visual data, and the sense of smell, etc. The robot's hand needs sensor devices that can receive exterior stimuli in order to operate similarly to human skin. The flexible tactile sensor for the robot has to be manufactured to have a shape similar to the shape of human skin. The research studied the development of a system and materials that will enable exterior stimuli to be received effectively. This research used carbon nano tube as a material. Carbon nano tube is used because it has a high electrical conductivity and outstanding mechanical characteristics. In addition, the two composite Materials are used to improve the stimulation sensitivity at different rates, the flexible tactile sensor to measure the sensitivity. Using 3D printing technology, the fabrication of a flexible tactile sensor system is introduced.

  19. Research for improved flexible tactile sensor sensitivity

    International Nuclear Information System (INIS)

    Yun, Hae Yong; Kim, Ho Chan; Lee, In Hwan

    2015-01-01

    With the development of robotic technologies, in recent years these technologies have been applied to multidisciplinary fields of study. To operate similarly to a human being, many robot technologies require devices that can receive exterior stimulus, temperature, visual data, and the sense of smell, etc. The robot's hand needs sensor devices that can receive exterior stimuli in order to operate similarly to human skin. The flexible tactile sensor for the robot has to be manufactured to have a shape similar to the shape of human skin. The research studied the development of a system and materials that will enable exterior stimuli to be received effectively. This research used carbon nano tube as a material. Carbon nano tube is used because it has a high electrical conductivity and outstanding mechanical characteristics. In addition, the two composite Materials are used to improve the stimulation sensitivity at different rates, the flexible tactile sensor to measure the sensitivity. Using 3D printing technology, the fabrication of a flexible tactile sensor system is introduced.

  20. Nanowire surface fastener fabrication on flexible substrate

    Science.gov (United States)

    Toku, Yuhki; Uchida, Keita; Morita, Yasuyuki; Ju, Yang

    2018-07-01

    The market for wearable devices has increased considerably in recent years. In response to this demand, flexible electronic circuit technology has become more important. The conventional bonding technology in electronic assembly depends on high-temperature processes such as reflow soldering, which result in undesired thermal damages and residual stress at a bonding interface. In addition, it exhibits poor compatibility with bendable or stretchable device applications. Therefore, there is an urgent requirement to attach electronic parts on printed circuit boards with good mechanical and electrical properties at room temperature. Nanowire surface fasteners (NSFs) are candidates for resolving these problems. This paper describes the fabrication of an NSF on a flexible substrate, which can be used for room temperature conductive bonding. The template method is used for preparing high-density nanowire arrays. A Cu thin film is layered on the template as the flexible substrate. After etching the template, a Cu NSF is obtained on the Cu film substrate. In addition, the electrical and mechanical properties of the Cu NSF are studied under various fabrication conditions. The Cu NSF exhibits high shear adhesion strength (∼234 N cm‑2) and low contact resistivity (2.2 × 10‑4 Ω cm2).

  1. Flexible heartbeat sensor for wearable device.

    Science.gov (United States)

    Kwak, Yeon Hwa; Kim, Wonhyo; Park, Kwang Bum; Kim, Kunnyun; Seo, Sungkyu

    2017-08-15

    We demonstrate a flexible strain-gauge sensor and its use in a wearable application for heart rate detection. This polymer-based strain-gauge sensor was fabricated using a double-sided fabrication method with polymer and metal, i.e., polyimide and nickel-chrome. The fabrication process for this strain-gauge sensor is compatible with the conventional flexible printed circuit board (FPCB) processes facilitating its commercialization. The fabricated sensor showed a linear relation for an applied normal force of more than 930 kPa, with a minimum detectable force of 6.25Pa. This sensor can also linearly detect a bending radius from 5mm to 100mm. It is a thin, flexible, compact, and inexpensive (for mass production) heart rate detection sensor that is highly sensitive compared to the established optical photoplethysmography (PPG) sensors. It can detect not only the timing of heart pulsation, but also the amplitude or shape of the pulse signal. The proposed strain-gauge sensor can be applicable to various applications for smart devices requiring heartbeat detection. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Modeling of Flexible Beams for Robotic Manipulators

    International Nuclear Information System (INIS)

    Martins, Jorge; Ayala Botto, Miguel; Costa, Jose sa da

    2002-01-01

    This work treats the problem of modeling robotic manipulators with structural flexibility. A mathematical model of a planar manipulator with a single flexible link is developed. This model is capable of reproducing nonlinear dynamic effects, such as the beam stiffening due to the centrifugal forces induced by the rotation of the joints, giving it the capability to predict reliable dynamic behaviors for a wide range of applications. On the other hand, the model complexity is reduced, in order to keep it amenable for analysis and controller design. The models found in current literature for control design of flexible manipulator arms present dynamic limitations for the sake of real time implementation in a control scheme. These limitations are the result of premature linearization in the formulation of the dynamics equations. In this paper, this common linearization is presented and their dynamic limitations uncovered. An alternative reliable model is then presented. The model is founded on two basic assumptions: inextensibility of the neutral fiber and moderate rotations of the cross sections in order to account for the foreshortening of the beam due to bending. Simulation and experimental results show that the proposed model has the closest dynamic behavior to the real beam

  3. Recent Progress on Flexible and Wearable Supercapacitors.

    Science.gov (United States)

    Xue, Qi; Sun, Jinfeng; Huang, Yan; Zhu, Minshen; Pei, Zengxia; Li, Hongfei; Wang, Yukun; Li, Na; Zhang, Haiyan; Zhi, Chunyi

    2017-12-01

    Recently, wearable electronic devices including electrical sensors, flexible displays, and health monitors have received considerable attention and experienced rapid progress. Wearable supercapacitors attract tremendous attention mainly due to their high stability, low cost, fast charging/discharging, and high efficiency; properties that render them value for developing fully flexible devices. In this Concept, the recent achievements and advances made in flexible and wearable supercapacitors are presented, especially highlighting the promising performances of yarn/fiber-shaped and planar supercapacitors. On the basis of their working mechanism, electrode materials including carbon-based materials, metal oxide-based materials, and conductive polymers with an emphasis on the performance-optimization method are introduced. The latest representative techniques and active materials of recently developed supercapacitors with superior performance are summarized. Furthermore, the designs of 1D and 2D electrodes are discussed according to their electrically conductive supporting materials. Finally, conclusions, challenges, and perspective in optimizing and developing the electrochemical performance and function of wearable supercapacitors for their practical utility are addressed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Flexible joints in structural and multibody dynamics

    Directory of Open Access Journals (Sweden)

    O. A. Bauchau

    2013-02-01

    Full Text Available Flexible joints, sometimes called bushing elements or force elements, are found in all structural and multibody dynamics codes. In their simplest form, flexible joints simply consist of sets of three linear and three torsional springs placed between two nodes of the model. For infinitesimal deformations, the selection of the lumped spring constants is an easy task, which can be based on a numerical simulation of the joint or on experimental measurements. If the joint undergoes finite deformations, identification of its stiffness characteristics is not so simple, specially if the joint is itself a complex system. When finite deformations occur, the definition of deformation measures becomes a critical issue. This paper proposes a family of tensorial deformation measures suitable for elastic bodies of finite dimension. These families are generated by two parameters that can be used to modify the constitutive behavior of the joint, while maintaining the tensorial nature of the deformation measures. Numerical results demonstrate the objectivity of the deformations measures, a feature that is not shared by the deformations measures presently used in the literature. The impact of the choice of the two parameters on the constitutive behavior of the flexible joint is also investigated.

  5. Flexible goal attribution in early mindreading.

    Science.gov (United States)

    Michael, John; Christensen, Wayne

    2016-03-01

    The 2-systems theory developed by Apperly and Butterfill (2009; Butterfill & Apperly, 2013) is an influential approach to explaining the success of infants and young children on implicit false-belief tasks. There is extensive empirical and theoretical work examining many aspects of this theory, but little attention has been paid to the way in which it characterizes goal attribution. We argue here that this aspect of the theory is inadequate. Butterfill and Apperly's characterization of goal attribution is designed to show how goals could be ascribed by infants without representing them as related to other psychological states, and the minimal mindreading system is supposed to operate without employing flexible semantic-executive cognitive processes. But research on infant goal attribution reveals that infants exhibit a high degree of situational awareness that is strongly suggestive of flexible semantic-executive cognitive processing, and infants appear moreover to be sensitive to interrelations between goals, preferences, and beliefs. Further, close attention to the structure of implicit mindreading tasks--for which the theory was specifically designed--indicates that flexible goal attribution is required to succeed. We conclude by suggesting 2 approaches to resolving these problems. (c) 2016 APA, all rights reserved).

  6. Behavioral flexibility and problem solving in an invasive bird.

    Science.gov (United States)

    Logan, Corina J

    2016-01-01

    Behavioral flexibility is considered an important trait for adapting to environmental change, but it is unclear what it is, how it works, and whether it is a problem solving ability. I investigated behavioral flexibility and problem solving experimentally in great-tailed grackles, an invasive bird species and thus a likely candidate for possessing behavioral flexibility. Grackles demonstrated behavioral flexibility in two contexts, the Aesop's Fable paradigm and a color association test. Contrary to predictions, behavioral flexibility did not correlate across contexts. Four out of 6 grackles exhibited efficient problem solving abilities, but problem solving efficiency did not appear to be directly linked with behavioral flexibility. Problem solving speed also did not significantly correlate with reversal learning scores, indicating that faster learners were not the most flexible. These results reveal how little we know about behavioral flexibility, and provide an immense opportunity for future research to explore how individuals and species can use behavior to react to changing environments.

  7. Limited access: gender, occupational composition, and flexible work scheduling.

    Science.gov (United States)

    Glauber, Rebecca

    2011-01-01

    The current study draws on national data to explore differences in access to flexible work scheduling by the gender composition of women's and men's occupations. Results show that those who work in integrated occupations are more likely to have access to flexible scheduling. Women and men do not take jobs with lower pay in return for greater access to flexibility. Instead, jobs with higher pay offer greater flexibility. Integrated occupations tend to offer the greatest access to flexible scheduling because of their structural locations. Part-time work is negatively associated with men's access to flexible scheduling but positively associated with women's access. Women have greater flexibility when they work for large establishments, whereas men have greater flexibility when they work for small establishments.

  8. Manned Mission Space Exploration Utilizing a Flexible Universal Module

    Science.gov (United States)

    Humphries, P.; Barez, F.; Gowda, A.

    2018-02-01

    The proposed ASMS, Inc. "Flexible Universal Module" is in support of NASA's Deep Space Gateway project. The Flexible Universal Module provides a possible habitation or manufacturing environment in support of Manned Mission for Space Exploration.

  9. Acogida de los solicitantes de asilo con discapacidad en Europa

    OpenAIRE

    Beduschi-Ortiz, Ana

    2010-01-01

    Con respecto a la acogida de los solicitantes de asilo en la Unión Europea, podemos encontrar disposiciones para la protección de las personas con discapacidad en una amplia gama de fuentes reguladoras.

  10. El cálculo flexible

    OpenAIRE

    Gómez, Bernardo

    2008-01-01

    En esta ponencia se hace una propuesta alternativa de enseñanza del cálculo algorítmico. Para explicar esta propuesta se describen las distintas clases de cálculo, sus fundamentos y sus representaciones. Se justifica la propuesta con una reflexión teórica sobre el problema de fondo de la enseñanza del cálculo aritmético.

  11. Free-form Flexible Lithium-Ion Microbattery

    KAUST Repository

    Kutbee, Arwa T.

    2016-03-02

    Wearable electronics need miniaturized, safe and flexible power sources. Lithium ion battery is a strong candidate as high performance flexible battery. The development of flexible materials for battery electrodes suffers from the limited material choices. In this work, we present integration strategy to rationally design materials and processes to report flexible inorganic lithium-ion microbattery with no restrictions on the materials used. The battery shows an enhanced normalized capacity of 147 μAh/cm2 when bent.

  12. Flexible lithium-ion planer thin-film battery

    KAUST Repository

    Kutbee, Arwa T.

    2016-02-03

    Commercialization of wearable electronics requires miniaturized, flexible power sources. Lithium ion battery is a strong candidate as the next generation high performance flexible battery. The development of flexible materials for battery electrodes suffers from the limited material choices. In this work, we present a flexible inorganic lithium-ion battery with no restrictions on the materials used. The battery showed an enhanced normalized capacity of 146 ??Ah/cm2.

  13. Flexible Working and Couples' Coordination of Time Schedules

    OpenAIRE

    Bryan, Mark L.; Sevilla Sanz, Almudena

    2014-01-01

    Using previously unexploited data on time scheduling in the employment and household contexts, we investigate the effect of flexible working on couples' coordination of their daily work time schedules in the UK. We consider three distinct dimensions of flexible working: flexibility of daily start and finish times (flexitime), flexibility of work times over the year (annualised hours), and generalised control of working hours. We find that in couples with flexitime there is greater spouse sync...

  14. Flexible automation and the loss of pooling synergy

    OpenAIRE

    Slomp, Jannes; Zee, Durk-Jouke van der

    2001-01-01

    This paper focuses on the effects of flexible automation on the performance of a job shop. Flexible automated machines may significantly improve the delivery performance and the flow time of jobs. The insertion of a flexible automated system in a job shop, however, also has a counter effect on the manufacturing performance. This is caused by the reduction of pooling synergy due to the dedication implied by flexible automated machines. This paper investigates by means of a simulation study to ...

  15. An investigation into the experiences of managers who work flexibly

    OpenAIRE

    Anderson, Deirdre

    2008-01-01

    This thesis explores the experiences of managers who work flexibly. Flexible working policies are prevalent in all organizations in the UK because of the legislation giving specific groups of parents and carers the right to request flexible working. Many organizations extend the policies to all employees, yet the take-up is not as high as expected, particularly among staff at managerial levels. This thesis explores how managers construe and experience flexible working arrangeme...

  16. Factores asociados con la irregularidad de la ingesta de Dapsona en pacientes con lepra: Dapsona en pacientes con lepra

    Directory of Open Access Journals (Sweden)

    Luis Carlos Orozco Vargas

    2013-04-01

    Full Text Available Introducción: Conocer los factores asociados al cumplimiento del tratamiento en pacientes con lepra, es muy importante para prevenir la resistencia del Mycobacterium leprae y garantizar la cura bacteriológica de estas personas. La prueba de orina para Dapsona, presente en el régimen autoadministrado, es un método sencillo para establecer la regularidad del tratamiento. Objetivo: Explorar los factores asociados a la irregularidad de la ingesta del tratamiento antileproso. Métodos: Estudio de corte transversal de los enfermos que recibieron tratamiento antileproso en un centro dermatológico. La irregularidad se estableció con la prueba de dapsonuria. Se consideró irregular el que presentó la prueba negativa. Las variables sospechosas de influir en la irregularidad se analizaron con regresión logística exacta. Resultados: En el modelo final del análisis multivariado se encontraron cinco variables asociadas, entre éstas sobresalen como factores de riesgo, la ausencia de discapacidad, OR 28.56 (IC90% 1.2-2.1 y la entrega de tratamiento para tiempos mayores a un mes, por cada mes OR 3.41 (IC90% 1.4-9.2 y como factor protector, la aceptación familiar de la enfermedad OR 0.008 (IC90% 0.001-0.24. Conclusión: Aunque es posible que el pequeño tamaño de muestra no haya permitido detectar algunos factores de riesgo informados en otras investigaciones, la mayoría de esos estudios no han realizado análisis multivariado por lo cual es posible que muchos de los factores informados en la literatura no tengan importancia. Salud UIS 2013; 45 (1: 7-14

  17. Peculiarities of Flexibility Development in Middle Schoolers

    Directory of Open Access Journals (Sweden)

    М. В. Солодовникова

    2015-09-01

    Full Text Available The paper objective is to define the peculiarities of flexibility development in middle schoolers. To solve the tasks set, the study used the following research methods: theoretical analysis and collation of scientific and methodological literature; pedagogical testing, methods of mathematical statistics. Research results. The testing analysis showed statistically unreliable deviations in the results displayed by the fifth-, sixth- and seventh-grade girls in the following tests: “Rotation in the shoulder joint with a staff”, “Backbend from the lying position”, “Forward bend from the sitting position” (p > 0.05. The fifth-, sixth- and seventh-grade girls show improvement in their statistically significant results (p < 0.05 in the following tests: “Raise up from the lying position to the sitting position in 30 seconds”, “Bending and unbending of arms in the lying position”. The testing analysis showed a statistically significant deterioration in the results displayed by the fifth-, sixth- and seventh-grade boys in the following tests: “Rotation in the shoulder joint with a staff”, “Backbend from the lying position” (p < 0.05. The fifth-, sixth- and seventh-grade boys show improvement in their statistically significant results (p < 0.05 in the test " Raise up from the lying position to the sitting position in 30 seconds”, and an improving tendency in the results in the test “Bending and unbending of arms in the lying position”. Conclusions. The informative indicators of flexibility and strength readiness of the 5th-7th-grade boys are “Rotation in the shoulder joint with a staff”, “Backbend from the lying position” and “Raise up from the lying position to the sitting position in 30 seconds”. The informative indicators of strength readiness of the 5th-7th-grade girls are “Raise up from the lying position to the sitting position in 30 seconds”, “Bending and unbending of arms in the lying

  18. Flexible Subjects: Educational Policy Neoliberal Rationalities Sujetos flexibles: racionalidades Neoliberales y políticas educativas. Vol. 13 No. 44

    Directory of Open Access Journals (Sweden)

    Lucia Gomez Sanchez

    2005-10-01

    Full Text Available Flexible Subjects: Neo-liberal Rationalities and Education Policy. This article aims to examine training and employment programmes for the young (more specifically, the Spanish Social Guarantee Schemes—Programas de Garantía Social in relation to neoliberal political rationalities. We believe the introduction of neoliberal policies to have been greater and faster precisely in the periphery of the educational system. To that end, we intend to make teachers' participation in the operation of the policies conceptually visible. The professionals’ discourse about the socio-labour integration of the young –a discourse that legitimises their daily work – will be analysed on the basis of qualitative materials from in-depth interviews. This analysis allows us to: 1 show the new ways of defining and valuing the teaching activity required and generated by these practical and institutional changes; 2 the analysis evidences some of the effects of the emerging discourses as well as the strategic roles they play in connection with neoliberal governance styles. En este texto nos proponemos examinar los programas de formación e inserción sociolaboral para jóvenes (concretamente, los llamados Programas de Garantía Social desarrollados por el estado español en relación con las racionalidades políticas neoliberales. Consideramos que es, precisamente, en los ámbitos periféricos del sistema educativo, donde la introducción de estas políticas neoliberales ha sido mayor y más acelerada. Para ello, pretendemos hacer visible la participación de los docentes en el funcionamiento de esas mismas políticas. Así, analizaremos los discursos que los profesionales de la inserción sociolaboral para jóvenes emplean para legitimar su actividad laboral cotidiana a partir de material cualitativo extraído de entrevistas en profundidad. El análisis nos permitirá, en primer lugar, mostrar las nuevas formas de definir y valorar la actividad docente

  19. APPLICATIONS OF RESEARCH TO THE PROBLEM OF INSTRUCTIONAL FLEXIBILITY.

    Science.gov (United States)

    SARTAIN, HARRY W.

    SELECTED RESEARCH ON THE PROBLEM OF INSTRUCTIONAL FLEXIBILITY IS SURVEYED AND DISCUSSED. BROAD TOPICS OF DISCUSSION ARE DEPARTMENTALIZATION, HOMOGENEOUS SECTIONING, INTERCLASS ABILITY SECTIONING, THE EXTENT OF VARIABILITY IN READING DEVELOPMENT, AND PRACTICES THAT MAY INCREASE FLEXIBILITY. AMONG THOSE PRACTICES TO INCREASE FLEXIBILITY ARE TEAM…

  20. 5 CFR 532.513 - Flexible and compressed work schedules.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Flexible and compressed work schedules... REGULATIONS PREVAILING RATE SYSTEMS Premium Pay and Differentials § 532.513 Flexible and compressed work schedules. Federal Wage System employees who are authorized to work flexible and compressed work schedules...