Computerized health information and the demand for medical care.

Science.gov (United States)

Wagner, Todd H; Jimison, Holly B

2003-01-01

Consumer health information, once the domain of books and booklets, has become increasingly digitized and available on the Internet. This study assessed the effect of using computerized health information on consumers' demand for medical care. The dependent variable was self-reported number of visits to the doctor in the past year. The key independent variable was the use of computerized health information, which was treated as endogenous. We tested the effect of using computerized health information on physician visits using ordinary least squares, instrumental variables, fixed effects, and fixed-effects instrumental variables models. The instrumental variables included exposure to the Healthwise Communities Project, a community-wide health information intervention; computer ownership; and Internet access. Random households in three cities were mailed questionnaires before and after the Healthwise Communities Project. In total, 5909 surveys were collected for a response rate of 54%. In both the bivariate and the multivariate analyses, the use of computerized health information was not associated with self-reported entry into care or number of visits. The instrumental variables models also found no differences, with the exception that the probability of entering care was significantly greater with the two-stage conditional logit model (P information is intuitively appealing, we found little evidence of an association between using a computer for health information and self-reported medical visits in the past year. This study used overall self-reported utilizations as the dependent variable, and more research is needed to determine whether health information affects the health production function in other important ways, such as the location of care, the timing of getting care, or the intensity of treatment.

45 CFR 307.13 - Security and confidentiality for computerized support enforcement systems in operation after...

Science.gov (United States)

2010-10-01

... ENFORCEMENT SYSTEMS § 307.13 Security and confidentiality for computerized support enforcement systems in... systems in operation after October 1, 1997. (a) Information integrity and security. Have safeguards... 45 Public Welfare 2 2010-10-01 2010-10-01 false Security and confidentiality for computerized...

Strategy generator in computerized accident management support system

International Nuclear Information System (INIS)

Sirola, M.

1994-02-01

An increased interest for research in the field of accident management of nuclear power plants can be noted. Several international programmes have been started in order to be able to understand the basic physical and chemical phenomena in accident conditions. A feasibility study has shown that it would be possible to design and develop a computerized support system for plant staff in accident situations. To achieve this goal the Halden Project has initiated a research programme on Computerized Accident Management Support (CAMS project). The aim is to utilize the capabilities of computerized tools to support the plant staff during the various accident stages. The system will include identification of the accident state, assessment of the future development of the accident and planning of accident mitigation strategies. A prototype is developed to support operators and the Technical Support Centre in decision making during serious accidents in nuclear power plants. A rule based system has been built to take care of the strategy generation. This system assists plant personnel in planning control proposals and mitigation strategies from normal operation to severe accident conditions. The idea of a safety objective tree and knowledge from the emergency procedures have been used. Future prediction requires good state identification of the plant status and some knowledge about the history of some critical variables. The information needs to be validated as well. Accurate calculations in simulators and a large database including all important information from the plant will help the strategy planning. (orig.). (40 refs., 20 figs.)

Implementing of the nuclear materials accounting and control computerized system at JINR

International Nuclear Information System (INIS)

Dobryanskij, V.M.; Kalyakin, N.N.; Koltin, G.P.; Samojlov, V.N.; Cheker, A.V.; Shestakov, B.A.

2000-01-01

The results of the development of the computerized nuclear materials accounting system at the Joint Institute for Nuclear Research (JINR) are submitted. This work was carried out under Russian-American Nuclear Materials Protection, Control and Accounting (MPCandA) Program. The System was implemented at the Institute, it was attested to work with sensitive information. The computerized information nuclear materials accounting and control system, named MTIS (Materials Tracking Information System), is intended for the automated accounting of the nuclear materials used in JINR, tracking their moving, changes of their inventory amounts, preparation of the required documentation, and also for information support of the measures spent in the JINR on MPCandA program. MTIS can prepare reports for federal level and can also generate data to be reported for internal purposes. MTIS includes as one of the subsystems a program module to prepare reporting information to the Federal Information System (FIS). The system MTIS provides control of access to the database (DB), protection of the information against the non-authorized access, division of the data into the sensitive and non-sensitive data. (author)

Computerized tools in psychology: cross cultural and genetically informative studies of memory

Directory of Open Access Journals (Sweden)

Ismatullina V.

2016-01-01

Full Text Available In this article we presented the computerized tools for psychological studies of memory. The importance of implementing computerized automated tools for psychological studies is discussed. It has been shown that this tools can be used both for cross-cultural and genetically informative studies. The validity of these tools for cross-cultural and genetically informative studies of memory can be seen as the first step to use automated computerized tools for big data collection in psychology.

Investigation of the Usability of Computerized Critical Care Information Systems in Germany.

Science.gov (United States)

von Dincklage, Falk; Suchodolski, Klaudiusz; Lichtner, Gregor; Friesdorf, Wolfgang; Podtschaske, Beatrice; Ragaller, Maximilian

2017-01-01

The term "usability" describes how effectively, efficiently, and with what level of user satisfaction an information system can be used to accomplish specific goals. Computerized critical care information systems (CCISs) with high usability increase quality of care and staff satisfaction, while reducing medication errors. Conversely, systems lacking usability can interrupt clinical workflow, facilitate errors, and increase charting time. The aim of this study was to investigate and compare usability across CCIS currently used in Germany. In this study, German intensive care unit (ICU) nurses and physicians completed a specialized, previously validated, web-based questionnaire. The questionnaire assessed CCIS usability based on three rating models: an overall rating of the systems, a model rating technical usability, and a model rating task-specific usability. We analyzed results from 535 survey participants and compared eight different CCIS commonly used in Germany. Our results showed that usability strongly differs across the compared systems. The system ICUData had the best overall rating and technical usability, followed by the platforms ICM and MetaVision. The same three systems performed best in the rating of task-specific usability without significant differences between each other. Across all systems, overall ratings were more dependent on ease-of-use aspects than on aspects of utility/functionality, and the general scope of the functions offered was rated better than how well the functions are realized. Our results suggest that manufacturers should shift some of their effort away from the development of new features and focus more on improving the ease-of-use and quality of existing features.

Assessing a computerized routine health information system in Mali using LQAS.

Science.gov (United States)

Stewart, J C; Schroeder, D G; Marsh, D R; Allhasane, S; Kone, D

2001-09-01

Between 1987 and 1998 Save the Children conducted a child survival programme in Mali with the goal of reducing maternal and child morbidity and mortality. An integral part of this programme was a computerized demographic surveillance and health information system (HIS) that gathered data on individuals on an on-going basis. To assess the overall coverage and quality of the data in the HIS, to identify specific health districts that needed improvements in data collection methods, and to determine particular areas of weakness in data collection. Random samples of 20 mothers with children LQAS) was used to identify districts in which records and interview results did not meet predetermined levels of acceptability. Data collected in the interviews were combined to estimate overall coverage and quality. When all variables were analyzed, all 14 lots were rejected, and it was estimated that 52% of all events occurring in the community were registered in ProMIS. Much of this poor performance was due to immunization and growth monitoring data, which were not updated due to printer problems. Coverage of events increased (92%) when immunizations and growth monitoring were excluded, and no lots were rejected. When all variables were analyzed for quality of data recorded, six lots were rejected and the overall estimation was 83%. With immunizations and growth monitoring excluded, overall quality was 86% and no lots were rejected. The comprehensive computerized HIS did not meet expectations. This may be due, in part, to the ambitious objective of complete and intensive monitoring of a large population without adequate staff and equipment. Future efforts should consider employing a more targeted and streamlined HIS so that data can be more complete and useful.

Information security risk management for computerized health information systems in hospitals: a case study of Iran.

Science.gov (United States)

Zarei, Javad; Sadoughi, Farahnaz

2016-01-01

In recent years, hospitals in Iran - similar to those in other countries - have experienced growing use of computerized health information systems (CHISs), which play a significant role in the operations of hospitals. But, the major challenge of CHIS use is information security. This study attempts to evaluate CHIS information security risk management at hospitals of Iran. This applied study is a descriptive and cross-sectional research that has been conducted in 2015. The data were collected from 551 hospitals of Iran. Based on literature review, experts' opinion, and observations at five hospitals, our intensive questionnaire was designed to assess security risk management for CHISs at the concerned hospitals, which was then sent to all hospitals in Iran by the Ministry of Health. Sixty-nine percent of the studied hospitals pursue information security policies and procedures in conformity with Iran Hospitals Accreditation Standards. At some hospitals, risk identification, risk evaluation, and risk estimation, as well as risk treatment, are unstructured without any specified approach or methodology. There is no significant structured approach to risk management at the studied hospitals. Information security risk management is not followed by Iran's hospitals and their information security policies. This problem can cause a large number of challenges for their CHIS security in future. Therefore, Iran's Ministry of Health should develop practical policies to improve information security risk management in the hospitals of Iran.

Physician Acceptance of a Computerized Outpatient Medication System in a Teaching Hospital Group Practice

OpenAIRE

Blish, Christi; Proctor, Rita; Fletcher, Suzanne W.; O'Malley, Michael

1983-01-01

As part of a new automated ambulatory medical record, a computerized outpatient medication system was developed for a teaching hospital general medicine group practice. Seven months after its implementation, the system was evaluated to determine physician acceptance and approval. Practice physicians were surveyed, and 94% of the respondents approved of the system. Over 90% thought that the computerized system had improved the completeness and accuracy of medication information as well as thei...

Information security risk management for computerized health information systems in hospitals: a case study of Iran

Science.gov (United States)

Zarei, Javad; Sadoughi, Farahnaz

2016-01-01

Background In recent years, hospitals in Iran – similar to those in other countries – have experienced growing use of computerized health information systems (CHISs), which play a significant role in the operations of hospitals. But, the major challenge of CHIS use is information security. This study attempts to evaluate CHIS information security risk management at hospitals of Iran. Materials and methods This applied study is a descriptive and cross-sectional research that has been conducted in 2015. The data were collected from 551 hospitals of Iran. Based on literature review, experts’ opinion, and observations at five hospitals, our intensive questionnaire was designed to assess security risk management for CHISs at the concerned hospitals, which was then sent to all hospitals in Iran by the Ministry of Health. Results Sixty-nine percent of the studied hospitals pursue information security policies and procedures in conformity with Iran Hospitals Accreditation Standards. At some hospitals, risk identification, risk evaluation, and risk estimation, as well as risk treatment, are unstructured without any specified approach or methodology. There is no significant structured approach to risk management at the studied hospitals. Conclusion Information security risk management is not followed by Iran’s hospitals and their information security policies. This problem can cause a large number of challenges for their CHIS security in future. Therefore, Iran’s Ministry of Health should develop practical policies to improve information security risk management in the hospitals of Iran. PMID:27313481

A COMPUTERIZED OPERATOR SUPPORT SYSTEM PROTOTYPE

Energy Technology Data Exchange (ETDEWEB)

Thomas A. Ulrich; Roger Lew; Ronald L. Boring; Ken Thomas

2015-03-01

A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. A prototype COSS was developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. The initial version of the prototype is now operational at the Idaho National Laboratory using the Human System Simulation Laboratory.

Accessing leaking underground storage tank case studies and publications through the EPA's Computerized On-Line Information System (COLIS)

International Nuclear Information System (INIS)

Hillger, R.; Tibay, P.

1991-01-01

The US EPA's regulations for underground storage tanks (USTs) require corrective action to be taken in response to leaking USTs. Recent developments of UST programs nationwide as well as the introduction of new technologies to clean up UST sites have increased the diversity of experience levels among personnel involved with this type of work. The EPA's Computerized On-Line Information System (COLIS) has been developed to facilitate technology transfer among the personnel involved in UST cleanup. The system allows for the quick and simple retrieval of data relating to UST incidents, as well as other hazardous waste-related information. The system has been used by response personnel at all levels of government, academia, and private industry. Although it has been in existence for many years, users are just now realizing the potential wealth of information stored in this system. COLIS access can be accomplished via telephone lines utilizing a personal computer and a modem

Core on-line monitoring and computerized procedures systems

International Nuclear Information System (INIS)

Gangloff, W.C.

1986-01-01

The availability of operating nuclear power plants has been affected significantly by the difficulty people have in coping with the complexity of the plants and the operating procedures. Two ways to use modern computer technology to ease the burden of coping are discussed in this paper, an on-line core monitoring system with predictive capability and a computerized procedures system using live plant data. These systems reduce human errors by presenting information rather than simply data, using the computer to manipulate the data, but leaving the decisions to the plant operator

Validation of the computerized annunciation message list system (CAMLS)

Energy Technology Data Exchange (ETDEWEB)

Feher, M P; Davey, E C; Lupton, L R [AECL, Chalk River Labs., Chalk River, ON (Canada)

1997-09-01

The Computerized Annunciation Message List System is a computerized annunciation system for the control rooms of nuclear generating stations. CAMLS will alert operators to changes in plant conditions that may impact on safety and production and help staff to effectively respond. CAMLS is designed to: provide a clear and concise overview of the current problems or faults in the plant; provide an overview of the current state of the plant in terms of automatic process and equipment actions; provide support for specific operational tasks, through either pre-configured or operator-configured annunciation displays, including: rapid and efficient upset response, plant stabilization, problem diagnosis, recovery action planning and implementation, and rapid recovery from trip and return to power operation. To achieve this, several information processing, presentation,a nd interaction concepts were developed. 2 refs, 6 figs, 7 tabs.

Validation of the computerized annunciation message list system (CAMLS)

International Nuclear Information System (INIS)

Feher, M.P.; Davey, E.C.; Lupton, L.R.

1997-01-01

The Computerized Annunciation Message List System is a computerized annunciation system for the control rooms of nuclear generating stations. CAMLS will alert operators to changes in plant conditions that may impact on safety and production and help staff to effectively respond. CAMLS is designed to: provide a clear and concise overview of the current problems or faults in the plant; provide an overview of the current state of the plant in terms of automatic process and equipment actions; provide support for specific operational tasks, through either pre-configured or operator-configured annunciation displays, including: rapid and efficient upset response, plant stabilization, problem diagnosis, recovery action planning and implementation, and rapid recovery from trip and return to power operation. To achieve this, several information processing, presentation,a nd interaction concepts were developed. 2 refs, 6 figs, 7 tabs

Computerized tomography

International Nuclear Information System (INIS)

Rubashov, I.B.

1985-01-01

Operating principle is described for the devices of computerized tomography used in medicine for diagnosis of brain diseases. Computerized tomography is considered as a part of computerized diagnosis, as a part of information science. It is shown that computerized tomography is a real existed field of investigations in medicine and industrial production

Computerized ECT data analysis system

International Nuclear Information System (INIS)

Miyake, Y.; Fukui, S.; Iwahashi, Y.; Matsumoto, M.; Koyama, K.

1988-01-01

For the analytical method of the eddy current testing (ECT) of steam generator tubes in nuclear power plants, the authors have developed the computerized ECT data analysis system using a large-scale computer with a high-resolution color graphic display. This system can store acquired ECT data up to 15 steam generators, and ECT data can be analyzed immediately on the monitor in dialogue communication with a computer. Analyzed results of ECT data are stored and registered in the data base. This system enables an analyst to perform sorting and collecting of data under various conditions and obtain the results automatically, and also to make a plan of tube repair works. This system has completed the test run, and has been used for data analysis at the annual inspection of domestic plants. This paper describes an outline, features and examples of the computerized eddy current data analysis system for steam generator tubes in PWR nuclear power plants

Study on computerized presentation of emergency procedures of a nuclear plant (step 2). The guidelines of the prototype of the computerized procedure presentation system

International Nuclear Information System (INIS)

Niwa, Yuji; Hollnagel, E.; Iwaki, Toshio.

1995-01-01

New methods of information presentation and interface design are changing the working conditions in the modern Nuclear Power Plant (NPP) control room. One area receiving considerable attention is that of Emergency Operating Procedures (EOPs), which plays an essential role in NPPs. Conventionally procedures are presented in a hard copy form. However developments in information technology have offered new opportunities for the computerization of such procedures. Consideration for the first stage of computerization should be focused upon the presentation of procedures. The specification of the computerized presentation of procedures is discussed with respect to the issues which were central to the project: navigation through procedures; formatting and presentation of procedures; and process monitoring. Issues that would be included in more advanced systems, such as help and explanation facilities features, and process linking, are also discussed. This paper deals with the specific design guidelines that were implemented for the computerization of procedure presentation. Issues of principal concern that were identified from this experience are highlighted, such as the relationship between procedure presentation and format; the registration of progress through a procedure; compensation for the limitations of computer displays versus printed documents; and the way in which the added capabilities of computerized presentation can be generally utilized in the operators' working environment. (author)

Computerized systems for high level information processing and decision making in the field of PSA

International Nuclear Information System (INIS)

Kafka, P.; Kunitz, H.

1990-01-01

A comprehensive review of Probabilistic Safety Assessment (PSA) related program packages is made. Three fields in methodological succession are covered: plant modeling, data quantification procedures and decision-making support. Packages for fault tree construction and minimal cut sets evaluation are referred to and the performances of three of them: RALLY, ORCHARD and SALP-PC, are discussed and compared. Notions on the raw data sources are presented and the Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is given as an example for data base management system generating PSA data. Aggregated risk models for support in safety assessment, plant operation and accident management (SARA, ESSM, PRISIM) are cited. Examples of systems supporting 'living PSA' (SAIS, SUPER-NET, LESSEPS 1300, NUPRA, SPSA) are given. The concluding remarks outline the state-of-the-art developments of computerized systems for reliability analyses. 1 fig., 1 tab., 51 refs. (R.Ts)

Computerized procedures system

Science.gov (United States)

Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

2010-10-12

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Warning systems in a computerized nursing process for Intensive Care Units

Directory of Open Access Journals (Sweden)

Daniela Couto Carvalho Barra

2014-02-01

Full Text Available A hybrid study combining technological production and methodological research aiming to establish associations between the data and information that are part of a Computerized Nursing Process according to the ICNP® Version 1.0, indicators of patient safety and quality of care. Based on the guidelines of the Agency for Healthcare Research and Quality and the American Association of Critical Care Nurses for the expansion of warning systems, five warning systems were developed: potential for iatrogenic pneumothorax, potential for care-related infections, potential for suture dehiscence in patients after abdominal or pelvic surgery, potential for loss of vascular access, and potential for endotracheal extubation. The warning systems are a continuous computerized resource of essential situations that promote patient safety and enable the construction of a way to stimulate clinical reasoning and support clinical decision making of nurses in intensive care.

Diversity in computerized reactor protection systems

International Nuclear Information System (INIS)

Fischer, H.D.; Piel, L.

1999-01-01

Based on engineering judgement, the most important measures to increase the independency of redundant trains of a computerized safety instrumentation and control system (I and C) in a nuclear power plant are evaluated with respect to practical applications. This paper will contribute to an objective discussion on the necessary and justifiable arrangement of diversity in a computerized safety I and C system. Important conclusions are: - (i) diverse equipment may be used to control dependent failures only if measures necessary for designing, licensing, and operating a computerized safety I and C system homogeneous in equipment are neither technically nor economically feasible; - (ii) the considerable large operating experience in France with a non-diverse equipment digital reactor protection system does not call for equipment diversity. Although there are no generally accepted methods, the licensing authority is still required to take into account dependent failures in a probabilistic safety analysis; - (ii) the frequency of postulated initiating events implies which I and C functionality should be implemented on diverse equipment. Using non-safety I and C equipment in addition to safety I and C equipment is attractive because its necessary unavailability to control an initiating event in teamwork with the safety I and C equipment is estimated to range from 0.01 to 0.1. This can be achieved by operational experience

Computerized analysis of isometric tension studies provides important additional information about vasomotor activity

Directory of Open Access Journals (Sweden)

Vincent M.B.

1997-01-01

Full Text Available Concentration-response curves of isometric tension studies on isolated blood vessels are obtained traditionally. Although parameters such as Imax, EC50 and pA2 may be readily calculated, this method does not provide information on the temporal profile of the responses or the actual nature of the reaction curves. Computerized data acquisition systems can be used to obtain average data that represent a new source of otherwise inaccessible information, since early and late responses may be observed separately in detail

Natural Resources Information System for the State of Oklahoma

International Nuclear Information System (INIS)

Mankin, C.J.

1992-01-01

The objective of this research program was to continue developing, editing, maintaining, utilizing and making publicly available the Natural Resources Information System (NRIS) for the State of Oklahoma. The Oklahoma Geological Survey, working with Geological Information Systems at the University of Oklahoma's Sarkeys Energy Center, undertook to construct this information system in response to the need for a computerized, centrally located library containing accurate, detailed information on the state's natural resources. Particular emphasis during this phase of development was placed on computerizing information related to the energy needs of the nation, specifically oil and gas

Computer-Supported Information Systems.

Science.gov (United States)

Mayhew, William H.

1983-01-01

The planning and implementation of a computerized management information system at a fictional small college is described. Nine key points are made regarding department involvement, centralization, gradual program implementation, lowering costs, system documentation, and upper-level administrative support. (MSE)

45 CFR 307.25 - Review and certification of computerized support enforcement systems.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF HEALTH AND HUMAN SERVICES COMPUTERIZED SUPPORT ENFORCEMENT SYSTEMS § 307.25 Review and certification of computerized support enforcement systems. The Office will review, assess and inspect the... 45 Public Welfare 2 2010-10-01 2010-10-01 false Review and certification of computerized support...

Computerized radiation control system in the Chernobyl 30-km zone

International Nuclear Information System (INIS)

Vasil'chenko, D.L.; Pis'mak, A.D.; Livertovskij, G.P.; Chikhladze, V.S.

1992-01-01

Computerized radiation control system is intended for monitoring radiation in the zone of radiation-hazardous objects for providing nuclear power station services with current information on radiactive situation in the zone of observation and the doses of radiation taken by the personnel. Described are tasks and functions of the system, as well as its structure. It is noted that unique conditions of the Chernobyl' 30-km zone open up opportunities for experiments and testing new models of equipment. 2 figs

Development of an instrument to measure health center (HC) personnel's computer use, knowledge and functionality demand for HC computerized information system in Thailand.

Science.gov (United States)

Kijsanayotin, Boonchai; Pannarunothai, Supasit; Speedie, Stuart

2005-01-01

Knowledge about socio-technical aspects of information technology (IT) is vital for the success of health IT projects. The Thailand health administration anticipates using health IT to support the recently implemented national universal health care system. However, the national knowledge associate with the socio-technical aspects of health IT has not been studied in Thailand. A survey instrument measuring Thai health center (HC) personnel's computer use, basic IT knowledge and HC computerized information system functionality needs was developed. The instrument reveals acceptable test-retest reliability and reasonable internal consistency of the measures. The future nation-wide demonstration study will benefit from this study.

Computerized operator support system for the JMTR: ARGUS

International Nuclear Information System (INIS)

Oyamada, R.; Yamamoto, K.; Ishii, Y.; Sekine, N.; Nemoto, N.

1988-01-01

ARGUS is computerized operator support system developed for the JMTR Function keybords, alphanumic keybords, and colour display terminals serve as comminication interface between ARGUS and operating personnel. ARGUS serves the following purposes; 1) data logging, 2) early abnormality detection, 3) presenting relevant and concentrated information to the operators to support their accurate judgment in case of abnormality occurrence, 4) save of time-historical data for diagnostics, and 5) data base necessary for JMTR operation and maintenance. ARGUS has been implemented on a VAX-11/750 with mos memories of 7.25 MB. (author)

The water reactor safety research project index: a description of the computerized system for its databank

International Nuclear Information System (INIS)

Della Loggia, E.; Primavera, R.

1993-01-01

The water reactor nuclear safety research project index has been published by the CEC for many years as a compilation of information on research projects relating to LWR nuclear safety. Since 1981, it has been published, alternatively with NEA (OECD), every second year. The number of contributions from research organizations in Community member countries has steadily increased and reached the level of 1 700 pages, in which more than 600 project descriptions have been collected. In 1988, for the first time, the document was produced using a computerized system developed with the assistance of the ISEI (Institute for Systems Engineering and Informatics) of JRC Ispra. The data have been stored in a computer based in Ispra. The system allows searching a preselected set of subjects through the information stored in the computer: it makes the updating of the projects description much easier and makes the retrieval of the data possible. This report presents a short description of the computerized system developed for the databank of the index. The computerized system presented in this report is structured in a quite general way and for that reason can be adapted very easily to every field where a databank needs to be constituted in order to collect extended information on several projects. (authors). 6 figs., 5 tabs., 5 refs

The computerized OMAHA system in microsoft office excel.

Science.gov (United States)

Lai, Xiaobin; Wong, Frances K Y; Zhang, Peiqiang; Leung, Carenx W Y; Lee, Lai H; Wong, Jessica S Y; Lo, Yim F; Ching, Shirley S Y

2014-01-01

The OMAHA System was adopted as the documentation system in an interventional study. To systematically record client care and facilitate data analysis, two Office Excel files were developed. The first Excel file (File A) was designed to record problems, care procedure, and outcomes for individual clients according to the OMAHA System. It was used by the intervention nurses in the study. The second Excel file (File B) was the summary of all clients that had been automatically extracted from File A. Data in File B can be analyzed directly in Excel or imported in PASW for further analysis. Both files have four parts to record basic information and the three parts of the OMAHA System. The computerized OMAHA System simplified the documentation procedure and facilitated the management and analysis of data.

Computerized information system of the Mochovce nuclear power plant

International Nuclear Information System (INIS)

Holik, V.

1986-01-01

The computer-based information system for the Mochovce nuclear power plant has a hierarchic structure which incorporates SM 1804 microcomputers and SM 1420 minicomputers. With regard to operation it is divided into two levels: the information system at the level of power plant units and the information system t the level of the whole power plant. The information system of a unit provides the collection of information on the technological equipment of each unit for the operative control of the unit and documentation on unit operation. Each unit has its own independent computer information system. The actual nucleus of each unit information system consists of two computer complexes based on SM 1420 twin computers, mutually substitutional. The power plant level information system provides the processing and output of information for personnel in the central control room of the power plant and for other managerial staff. It uses preprocessed information from the unit information systems and direct information from non-unit installations and from dosimetric control rooms of the power plant units. This information system is also based on a computer complex with two SM 1420 computers. (Z.M.)

Quality indicators in a computerized technology information system

International Nuclear Information System (INIS)

Mancuso, C.A.; Hyde, R.A.

1992-01-01

An environmental technology information system was developed by EG ampersand G Idaho, Inc. at the Idaho National Engineering Laboratory (INEL) for the Department of Energy (DOE). The purpose of the system is to reduce costs and time associated with evaluating potential remedial alternatives for a waste site. The information system is organized to aid in the CERCLA process by describing the implementability, effectiveness, and cost of many remedial technologies. Technology categories included in the information system include: Institutional Controls, Retrieval, Separation, Characterization, Physical/Chemical Treatment, Biological Treatment, Thermal Treatment, Storage, Transportation, Disposal, Migration Control (containment), Support Systems, Waste Minimization, and Remote Operations. Two hundred and sixty processes are summarized in these technology areas. Information on these processes was collected from EPA publications, books, journal articles, conference proceedings, vendors, DOE publications, and technical experts. The purpose of this paper is to familiarize readers with issues associated with the development of information systems. A major issue is the system and software quality, which can be controlled by configuration management. Another major issue is the documentation of data quality indicators in references used to collect data for the system, which can not be controlled but must be planned for in the review process

Computerized data base of the fundamental constants of nature

International Nuclear Information System (INIS)

Henry, E.A.; Hampel, V.E.

1975-01-01

Fifty-seven fundamental constants of nature were computerized from the up-to-date evaluations of E. R. Cohen and B. N. Taylor. The constants are annotated with regard to symbol, value, uncertainty, and scaling factor. This computerization is part of the scientific data base project of the Information Research Group at Lawrence Livermore Laboratory. The MASTER CONTROL data base management system is used. The computerized fundamental constants can be requested from the ERDA Computer Program Exchange and Information Center of the Argonne National Laboratory or from the National Technical Information Service of the U. S. Department of Commerce. This is the first of a series of releases on preparation of computerized scientific and technological data banks. The next release is a data bank of conversion factors for different units of measurements. 3 figures

Computerized automated remote inspection system

International Nuclear Information System (INIS)

The automated inspection system utilizes a computer to control the location of the ultrasonic transducer, the actual inspection process, the display of the data, and the storage of the data on IBM magnetic tape. This automated inspection equipment provides two major advantages. First, it provides a cost savings, because of the reduced inspection time, made possible by the automation of the data acquisition, processing, and storage equipment. This reduced inspection time is also made possible by a computerized data evaluation aid which speeds data interpretation. In addition, the computer control of the transducer location drive allows the exact duplication of a previously located position or flaw. The second major advantage is that the use of automated inspection equipment also allows a higher-quality inspection, because of the automated data acquisition, processing, and storage. This storage of data, in accurate digital form on IBM magnetic tape, for example, facilitates retrieval for comparison with previous inspection data. The equipment provides a multiplicity of scan data which will provide statistical information on any questionable volume or flaw. An automatic alarm for location of all reportable flaws reduces the probability of operator error. This system has the ability to present data on a cathode ray tube as numerical information, a three-dimensional picture, or ''hard-copy'' sheet. One important advantage of this system is the ability to store large amounts of data in compact magnetic tape reels

Computerized systems of NPP operators support. (Psychological problems)

International Nuclear Information System (INIS)

Mashin, V.A.

1995-01-01

Operator psychological problems arising in the work with NPP operators support computerized systems (OSCS) are considered. The conclusion is made that the OSCS intellectual application will bring the operator into dangerous dependence on his computerized assistant. To avoid this danger it is necessary by creation of the OSCS to divide specially the tasks areas of the operator and OSCS in order to assure the active role of the operator in the NPP control

A Computerized Hospital Patient Information Management System

Science.gov (United States)

Wig, Eldon D.

1982-01-01

The information processing needs of a hospital are many, with varying degrees of complexity. The prime concern in providing an integrated hospital information management system lies in the ability to process the data relating to the single entity for which every hospital functions - the patient. This paper examines the PRIMIS computer system developed to accommodate hospital needs with respect to a central patient registry, inpatients (i.e., Admission/Transfer/Discharge), and out-patients. Finally, the potential for expansion to permit the incorporation of more hospital functions within PRIMIS is examined.

Process system of radiometric and magnetometric aerial information

International Nuclear Information System (INIS)

Bazua Rueda, L.F.

1985-01-01

The author has been working first in the National Institute of Nuclear Energy (Mexico) and then in URAMEX (Uranio Mexicano) since 1975 to 1983, integrated to radiometric and magnetometric aerial prospecting projects in computerized processing of information aspects. During this period the author participated in the work out of computing systems, information processing and mathematical procedures definition for the geophysical reduction of the calibration equipment data. With cumulated experience, in this thesis are presented aspects concerning to management and operation of computerized processing of information systems. Operation handbooks of the majority of modules are presented. Program lists are not included. (Author)

Computerized planning system for nuclear power plant evaluation

International Nuclear Information System (INIS)

Bonczek, R.H.; Holsapple, C.W.; Whinston, A.B.

1976-01-01

A computerized system is described for information storage and query processing adapted to complex socio-technological issues. The system is referred to as GPLAN (Generalized Planning System) and can accommodate both qualitative (verbal) and quantitative data. The issue illustrated is the construction of a nuclear power plant, and involves interdisciplinary research and planning. The system's outstanding features are the use of the network variety of data base, the selective retrieval of any configuration of data from a particular network structure, automatic execution of any desired application program from a standard or special library of applications, user interface with a data base and applications by submitting English-like, non-procedural queries, and generality which allows tailoring to specific applications and provides a basis for integration of planning and research activities. The system is general and can be used for a wide variety of socio-technological issues which involve complex data relationships

Accounting Information Systems in Healthcare: A Review of the Literature.

Science.gov (United States)

Hammour, Hadal; Househ, Mowafa; Razzak, Hira Abdul

2017-01-01

As information technology progresses in Saudi Arabia, the manual accounting systems have become graduallyinadequate for decision needs. Subsequently, private and public healthcare divisions in Saudi Arabia perceive Computerized accounting information system (CAIS) as a vehicle to safeguard efficient and effective flow of information during the analysis, processes, and recording of financial data. Efficient and effective flow of information improvesthe decision making of staff, thereby improving the capability of health care sectors to reduce cost of the medical services.In this paper, we define computerized accounting systems from the point of view of health informatics. Also, the challenges and benefits of supporting CAIS applications in hospitals of Saudi Arabia. With these elements, we conclude that CAIS in Saudi Arabia can serve as a valuable tool for evaluating and controlling the cost of medical services in healthcare sectors. Supplementary education on the significance of having systems of computerized accounting within hospitals for nurses, doctors, and accountants with other health care staff is warranted in future.

Safety assessment of computerized control and protection systems. Report of a technical committee meeting held in Vienna, 12-16 October 1992

International Nuclear Information System (INIS)

1994-12-01

In developing the views expressed in this document, papers were presented by delegates from Member States. A total of 6 papers were presented in all on topics ranging from applications of computerized control and protection systems in older plants and in new advanced reactors to methods for improving software reliability. In addition two informal presentations were provided by a vendor and a licensing authority. These presentations provided valuable insights into the application of computerized control and protection systems and into the concern of software reliability with proposals for diverse 'backup' systems of different types. This was supplemented by utility and vendor presentations on system designs. Following the presentations, three working groups were formed to produce their views on the licensing of software based safety systems on reliability models and techniques for assessment of computerized safety systems, and on systems considered for computerized upgrading (need, criteria, approach, pitfalls and benefits). This document represents these collected views with the papers presented attached as an annex. Refs, figs and tabs

COMPRESS - a computerized reactor safety system

International Nuclear Information System (INIS)

Vegh, E.

1986-01-01

The computerized reactor safety system, called COMPRESS, provides the following services: scram initiation; safety interlockings; event recording. The paper describes the architecture of the system and deals with reliability problems. A self-testing unit checks permanently the correct operation of the independent decision units. Moreover the decision units are tested by short pulses whether they can initiate a scram. The self-testing is described in detail

DARE: Unesco Computerized Data Retrieval System for Documentation in the Social and Human Sciences (Including an Analysis of the Present System).

Science.gov (United States)

Vasarhelyi, Paul

The new data retrieval system for the social sciences which has recently been installed in the UNESCO Secretariat in Paris is described in this comprehensive report. The computerized system is designed to facilitate the existing storage systems in the circulation of information, data retrieval, and indexing services. Basically, this report…

Information Systems and Management Training.

Science.gov (United States)

Curry, B.; Smith, D. G.

1991-01-01

A case study of a South Wales manufacturer illustrates the need for companies to adopt an integrated strategy for computerization and information systems. Lack of management training blending computing and business skills can have a crippling effect on system development and organizational health. (SK)

International Nuclear Information System (INIS)

International Nuclear Information System (INIS)

1987-01-01

Depicts the nature and operations of the first truly international, decentralized and computerized information processing and dissemination system, INIS. The products of the system, consisting of various literature indexes issued in both printed form and on magnetic tapes are described and their utility to scientists is demonstrated

Computerized dosimetry management systems within EDF

International Nuclear Information System (INIS)

Daubert, G.

1996-01-01

EDF, using the ALARA approach, has embarked an ambitious project of optimising the doses received in its power plants. In directing its choice of actions and the effectiveness of such actions, the French operator is using a computerized personal and collective dosimetry management system. This system provides for ongoing monitoring of dosimetry at personal, site and unit level or indeed for the entire population of EDF nuclear power plants. (author)

24 CFR 92.502 - Program disbursement and information system.

Science.gov (United States)

2010-04-01

... information system. 92.502 Section 92.502 Housing and Urban Development Office of the Secretary, Department of... disbursement and information system. (a) General. The Home Investment Trust Fund account established in the United States Treasury is managed through a computerized disbursement and information system established...

A study on the development of the computerized safety evaluation system of the motor operated valve

International Nuclear Information System (INIS)

Kim, J. C.; Park, S. G.; Lee, D. H.; Ahn, N. S.; Bae, H. J.; Hong, J. S.

2001-01-01

The MOVIDIK (Motor-Operated Valves Integrated Database and Information of KEPCO) system was developed to assist the design basis safety evaluation and to manage the overall data made by evaluation on the safety-related Motor-operated Valves(MOV) in the nuclear power plant. The huge amount of safety evaluation data of the MOV is being piled up as the safety evaluation work goes on. Much time and manpower was needed to do safety evaluation works without computerized system and it was not easy to obtain the statistic information from the evaluation data. The MOVIDIK will improve the efficiency of safety evaluation works and standardize the analysis process. But the some process which needs specific evaluation codes and engineering calculation by the specialists was not computerized. The MOVIDIK was developed by JAVA/JSP language known by the flexibility of language and the easiness of transplantation between operating systems. The Oracle 8i which is the world's most popular database was used for MOVIDIK database

How will computerization revolutionize managed care?

Science.gov (United States)

Trabin, T

1994-01-01

Computerization of behavioral health care information systems is revolutionizing how payors, managed care companies, and providers exchange information. In this article, an imaginary scenario is depicted of how patient data will be accessed and communicated to facilitate care management of behavioral health care services in the near future.

Reflecting on the ethical administration of computerized medical records

Science.gov (United States)

Collmann, Jeff R.

1995-05-01

This presentation examines the ethical issues raised by computerized image management and communication systems (IMAC), the ethical principals that should guide development of policies, procedures and practices for IMACS systems, and who should be involved in developing a hospital's approach to these issues. The ready access of computerized records creates special hazards of which hospitals must beware. Hospitals must maintain confidentiality of patient's records while making records available to authorized users as efficiently as possible. The general conditions of contemporary health care undermine protecting the confidentiality of patient record. Patients may not provide health care institutions with information about themselves under conditions of informed consent. The field of information science must design sophisticated systems of computer security that stratify access, create audit trails on data changes and system use, safeguard patient data from corruption, and protect the databases from outside invasion. Radiology professionals must both work with information science experts in their own hospitals to create institutional safeguards and include the adequacy of security measures as a criterion for evaluating PACS systems. New policies and procedures on maintaining computerized patient records must be developed that obligate all members of the health care staff, not just care givers. Patients must be informed about the existence of computerized medical records, the rules and practices that govern their dissemination and given the opportunity to give or withhold consent for their use. Departmental and hospital policies on confidentiality should be reviewed to determine if revisions are necessary to manage computer-based records. Well developed discussions of the ethical principles and administrative policies on confidentiality and informed consent and of the risks posed by computer-based patient records systems should be included in initial and continuing

Computerization of the safeguards analysis decision process

International Nuclear Information System (INIS)

Ehinger, M.H.

1990-01-01

This paper reports that safeguards regulations are evolving to meet new demands for timeliness and sensitivity in detecting the loss or unauthorized use of sensitive nuclear materials. The opportunities to meet new rules, particularly in bulk processing plants, involve developing techniques which use modern, computerized process control and information systems. Using these computerized systems in the safeguards analysis involves all the challenges of the man-machine interface experienced in the typical process control application and adds new dimensions to accuracy requirements, data analysis, and alarm resolution in the regulatory environment

A three-dimensional computerized isometric strength measurement system.

Science.gov (United States)

Black, Nancy L; Das, Biman

2007-05-01

The three-dimensional Computerized Isometric Strength Measurement System (CISMS) reliably and accurately measures isometric pull and push strengths in work spaces of paraplegic populations while anticipating comparative studies with other populations. The main elements of the system were: an extendable arm, a vertical supporting track, a rotating platform, a force transducer, stability sensors and a computerized data collection interface. The CISMS with minor modification was successfully used to measure isometric push-up and pull-down strengths of paraplegics and isometric push, pull, push-up and pull-down strength in work spaces for seated and standing able-bodied populations. The instrument has satisfied criteria of versatility, safety and comfort, ease of operation, and durability. Results are accurate within 2N for aligned forces. Costing approximately $1,500 (US) including computer, the system is affordable and accurate for aligned isometric strength measurements.

A mapping of information security in health Information Systems in Latin America and Brazil.

Science.gov (United States)

Pereira, Samáris Ramiro; Fernandes, João Carlos Lopes; Labrada, Luis; Bandiera-Paiva, Paulo

2013-01-01

In health, Information Systems are patient records, hospital administration or other, have advantages such as cost, availability and integration. However, for these benefits to be fully met, it is necessary to guarantee the security of information maintained and provided by the systems. The lack of security can lead to serious consequences such as lawsuits and induction to medical errors. The management of information security is complex and is used in various fields of knowledge. Often, it is left in the background for not being the ultimate goal of a computer system, causing huge financial losses to corporations. This paper by systematic review methodologies, presented a mapping in the literature, in order to identify the most relevant aspects that are addressed by security researchers of health information, as to the development of computerized systems. They conclude through the results, some important aspects, for which the managers of computerized health systems should remain alert.

Waste Information Data System user guide

International Nuclear Information System (INIS)

Dietz, L.A.

1996-09-01

The Waste Information Data System (also known as the Environmental Sites Database) is a computerized system that provides a traceable source of information about environmental waste sites at the U.S. Department of Energy's Hanford Site in Richland, Washington. The system includes discovery, rejected, and accepted waste sites. The purpose of the system is to assist long-range waste management and environmental restoration planning by providing validated and reliable information about waste sites. The system is used to track site investigation, remediation, and closure-action activities

The effects of mild and severe traumatic brain injury on speed of information processing as measured by the computerized tests of information processing (CTIP).

Science.gov (United States)

Tombaugh, Tom N; Rees, Laura; Stormer, Peter; Harrison, Allyson G; Smith, Andra

2007-01-01

In spite of the fact that reaction time (RT) measures are sensitive to the effects of traumatic brain injury (TBI), few RT procedures have been developed for use in standard clinical evaluations. The computerized test of information processing (CTIP) [Tombaugh, T. N., & Rees, L. (2000). Manual for the computerized tests of information processing (CTIP). Ottawa, Ont.: Carleton University] was designed to measure the degree to which TBI decreases the speed at which information is processed. The CTIP consists of three computerized programs that progressively increase the amount of information that is processed. Results of the current study demonstrated that RT increased as the difficulty of the CTIP tests increased (known as the complexity effect), and as severity of injury increased (from mild to severe TBI). The current study also demonstrated the importance of selecting a non-biased measure of variability. Overall, findings suggest that the CTIP is an easy to administer and sensitive measure of information processing speed.

Computerized accounting methods. Final report

International Nuclear Information System (INIS)

1994-01-01

This report summarizes the results of the research performed under the Task Order on computerized accounting methods in a period from 03 August to 31 December 1994. Computerized nuclear material accounting methods are analyzed and evaluated. Selected methods are implemented in a hardware-software complex developed as a prototype of the local network-based CONMIT system. This complex has been put into trial operation for test and evaluation of the selected methods at two selected ''Kurchatov Institute'' Russian Research Center (''KI'' RRC) nuclear facilities. Trial operation is carried out since the beginning of Initial Physical Inventory Taking in these facilities that was performed in November 1994. Operation of CONMIT prototype system was demonstrated in the middle of December 1994. Results of evaluation of CONMIT prototype system features and functioning under real operating conditions are considered. Conclusions are formulated on the ways of further development of computerized nuclear material accounting methods. The most important conclusion is a need to strengthen computer and information security features supported by the operating environment. Security provisions as well as other LANL Client/Server System approaches being developed by Los Alamos National Laboratory are recommended for selection of software and hardware components to be integrated into production version of CONMIT system for KI RRC

Design and development of computerized local and overall country's environmental data analysis network system

International Nuclear Information System (INIS)

Kim, Chang Gyu; Kang, Jong Gyu; Han, H.; Han, J. S.; Lee, Y. D.; Lee, S. R.; Kang, D. J.; Cho, Y. G.; Yun, S. H.

2001-03-01

In this development, we designed a integrated database for efficient data processing of radiation-environment data and developed the CLEAN (Computerized Local and overall country's Environmental data Analysis Network) system. The CLEAN system consists of local radiation-environment network, data analysis system, data open system. We developed the CLEAN system focused on building an integrated database, a data mart, and a CLEAN web site. It is expected that the developed system, which organizes the information related to environmental radiation data systematically, can be utilize for the accurate interpretation, analysis and evaluation

Computerized tomographic system

International Nuclear Information System (INIS)

Godbarsen, R.; Barrett, D.M.; Garrott, P.M.; Foley, L.E.; Redington, R.W.; Lambert, T.W.; Edelheit, L.S.

1981-01-01

A computerized tomographic system for examining human breasts is described in detail. Conventional X-ray scanning apparatus has difficulty in achieving the levels of image definition and examination speeds required for mass screening. A novel method of scanning successive layers of the breast with a rotating X-ray beam is discussed and details of the control circuitry and sequence steps are given. The method involves immersing the breast in an inner fluid (e.g. water) filled container which is stationary during an examination and is surrounded by a large outer container which is also filled with the fluid; the inner and outer containers are always maintained at a constant height and the X-ray absorption across the fan-shaped beam is as close as possible to constant. (U.K.)

The computerized reactor period measurement system for China fast burst reactor-II

International Nuclear Information System (INIS)

Zhao Wuwen; Jiang Zhiguo

1996-01-01

The article simply introduces the hardware, principle, and software of the computerized reactor period measurement system for China Fast Burst Reactor-II (CFBR-II). It also gives the relation between fission yield and pre-reactivity of CFBR-II reactor system of bared reactor with decoupled-component and system of bared reactor with multiple light-material. The computerized measurement system makes the reactor period measurement into automatical and intelligent and also improves the speed and precision of period data on-line process

Planning and design of information systems

CERN Document Server

Blokdijk, André

1991-01-01

Planning and Design of Information Systems provides a theoretical base and a practical method of executing the planning of computerized information systems, and the planning and design of individual applications. The book is organized into five parts, covering the non-technical and nonimplementational part of information systems planning, design, and development. Part I gives the theoretical base for the subsequent parts of the book. It discusses modeling, techniques, notations, boundaries, quality issues and aspects, and decomposition techniques and problems. Part II discusses the needs, prob

Computerized operation manual (COM) of nuclear power plants

International Nuclear Information System (INIS)

Szegi, Z.

1985-01-01

This paper is to be presented at the International Seminar on Diagnoses of and Response to Abnormal Occurrences at Nuclear Power Plants organized by the International Atomic Energy Agency. The topic of presentation is the Computerized Operational Manual. This system supports the operator at disturbance situations by displaying quickly and unambiguously the operational instructions and the relevant information without mistakes. By the computerized manual the operator can determine the instruction-subsystem which reflects the real state of the power unit. From this point the system guides the operator on how to drive the unit to another determined state by providing the operational instructions at any time. A data bank is also included which contains information concerning rules restricting on maintenance and repair. The system will be realized at Paks NPP. (author)

Physicians' Perceptions on the usefulness of contextual information for prioritizing and presenting alerts in computerized physician order entry systems

Directory of Open Access Journals (Sweden)

Jung Martin

2012-10-01

Full Text Available Abstract Background One possible approach towards avoiding alert overload and alert fatigue in Computerized Physician Order Entry (CPOE systems is to tailor their drug safety alerts to the context of the clinical situation. Our objective was to identify the perceptions of physicians on the usefulness of clinical context information for prioritizing and presenting drug safety alerts. Methods We performed a questionnaire survey, inquiring CPOE-using physicians from four hospitals in four European countries to estimate the usefulness of 20 possible context factors. Results The 223 participants identified the ‘severity of the effect’ and the ‘clinical status of the patient’ as the most useful context factors. Further important factors are the ‘complexity of the case’ and the ‘risk factors of the patient’. Conclusions Our findings confirm the results of a prior, comparable survey inquiring CPOE researchers. Further research should focus on implementing these context factors in CPOE systems and on subsequently evaluating their impact.

Integrating bar-code devices with computerized MC and A systems

International Nuclear Information System (INIS)

Anderson, L.K.; Boor, M.G.; Hurford, J.M.

1998-01-01

Over the past seven years, Los Alamos National Laboratory developed several generations of computerized nuclear materials control and accountability (MC and A) systems for tracking and reporting the storage, movement, and management of nuclear materials at domestic and international facilities. During the same period, Oak Ridge National Laboratory was involved with automated data acquisition (ADA) equipment, including installation of numerous bar-code scanning stations at various facilities to serve as input devices to computerized systems. Bar-code readers, as well as other ADA devices, reduce input errors, provide faster input, and allow the capture of data in remote areas where workstations do not exist. Los Alamos National Laboratory and Oak Ridge National Laboratory teamed together to implement the integration of bar-code hardware technology with computerized MC and A systems. With the expertise of both sites, the two technologies were successfully merged with little difficulty. Bar-code input is now available with several functions of the MC and A systems: material movements within material balance areas (MBAs), material movements between MBAs, and physical inventory verification. This paper describes the various components required for the integration of these MC and A systems with the installed bar-code reader devices and the future directions for these technologies

Density evaluation by computerized tomography in plain soils over different manipulation systems

International Nuclear Information System (INIS)

Pedrotti, Alceu

1996-08-01

The objective of this paper is the evaluation of a plain soil density in different culture systems determined by X ray computerized tomography.It was observed a larger variation in densities in soils profiles analysed. The identification of layers is better utilising computerized tomography than others technic

45 CFR 310.5 - What options are available for Computerized Tribal IV-D Systems and office automation?

Science.gov (United States)

2010-10-01

... IV-D Systems and office automation? 310.5 Section 310.5 Public Welfare Regulations Relating to Public... AUTOMATION Requirements for Computerized Tribal IV-D Systems and Office Automation § 310.5 What options are available for Computerized Tribal IV-D Systems and office automation? (a) Allowable computerized support...

Physicians' Perceptions on the usefulness of contextual information for prioritizing and presenting alerts in computerized physician order entry systems

NARCIS (Netherlands)

Jung, Martin; Riedmann, Daniel; Hackl, Werner O.; Hoerbst, Alexander; Jaspers, Monique W.; Ferret, Laurie; Lawton, Kitta; Ammenwerth, Elske

2012-01-01

Background: One possible approach towards avoiding alert overload and alert fatigue in Computerized Physician Order Entry (CPOE) systems is to tailor their drug safety alerts to the context of the clinical situation. Our objective was to identify the perceptions of physicians on the usefulness of

Adjustment of the Kompleks Titan-2 monitoring computerized system at the Rovno NPP third unit

International Nuclear Information System (INIS)

Zigaev, B.P.

1987-01-01

Information signal origin and processing processes in the monitoring computerized system 'Komplex Titan-2' at the Rovno NPP third unit are considered. The system exercises control over the following production equipment parameters: the state of keys of control of lock fittings, mechanisms, regulators, reserve mechanism automatic shut-down circuit; the state of lock fittings, mechanisms, regulators, reserve mechanism automated switching on; parameter deviation from permissible values; interlock operation; protection system state; the state of autonomous units and devices

Design and validation of a questionnaire to evaluate the usability of computerized critical care information systems.

Science.gov (United States)

von Dincklage, Falk; Lichtner, Gregor; Suchodolski, Klaudiusz; Ragaller, Maximilian; Friesdorf, Wolfgang; Podtschaske, Beatrice

2017-08-01

The implementation of computerized critical care information systems (CCIS) can improve the quality of clinical care and staff satisfaction, but also holds risks of disrupting the workflow with consecutive negative impacts. The usability of CCIS is one of the key factors determining their benefits and weaknesses. However, no tailored instrument exists to measure the usability of such systems. Therefore, the aim of this study was to design and validate a questionnaire that measures the usability of CCIS. Following a mixed-method design approach, we developed a questionnaire comprising two evaluation models to assess the usability of CCIS: (1) the task-specific model rates the usability individually for several tasks which CCIS could support and which we derived by analyzing work processes in the ICU; (2) the characteristic-specific model rates the different aspects of the usability, as defined by the international standard "ergonomics of human-system interaction". We tested validity and reliability of the digital version of the questionnaire in a sample population. In the sample population of 535 participants both usability evaluation models showed a strong correlation with the overall rating of the system (multiple correlation coefficients ≥0.80) as well as a very high internal consistency (Cronbach's alpha ≥0.93). The novel questionnaire is a valid and reliable instrument to measure the usability of CCIS and can be used to study the influence of the usability on their implementation benefits and weaknesses.

Examinations and patient management in radiologic diagnostics by means of a computerized data-processing communications system

International Nuclear Information System (INIS)

Klotz, E.; Remplik, V.; Opfer, M.; Wilde, E.

1986-01-01

Concept, realization and a two-year experience in routine use of a computerized data-processing communications system supporting the central radiology department in a 1.625-bed, municipal hospital are discussed. Via the hospital ward-linked terminal network, routine X-ray examination is so ordered, that individual medical case information is provided, which certifies qualified clinical and diagnostic procedure along with good patient preparation and transportation. Complete information and documentation are also ensured. It was shown, that good motivation among involved radiologists and their close working-association with other departments are mandatory from the start to maintain exact time schedules and satisfactory completion of ordered X-ray procedures. Subsequently, the assistance through computerized data-processing becomes an accepted help - so far as it is appropriately used - as time goes by in its routine use. (orig.) [de

Management information system of research institute supported by ministry of science and technology

International Nuclear Information System (INIS)

1992-12-01

This book mentions development strategy of MIS. This book contains development strategy of MIS research institute supported by government, computerization of administrative work of research institute, library computer system, methodology on system development, LAN build of ministry science and technology, ocean data base energy data base, computerization of research data management case of construction and analysis for chemical DB, information system of life science, electronic data interchange, queueing theory, biotechnology and computer, comprehensive weather information system, special equipment of data and data processing of oil-hunt operation.

Management information system of research institute supported by ministry of science and technology

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-15

This book mentions development strategy of MIS. This book contains development strategy of MIS research institute supported by government, computerization of administrative work of research institute, library computer system, methodology on system development, LAN build of ministry science and technology, ocean data base energy data base, computerization of research data management case of construction and analysis for chemical DB, information system of life science, electronic data interchange, queueing theory, biotechnology and computer, comprehensive weather information system, special equipment of data and data processing of oil-hunt operation.

A Computerized Clinical Support System and Psychological Laboratory.

Science.gov (United States)

Cassel, Russell N.

1978-01-01

Advocating "holistic" medicine, this article details the benefits to be derived from using a computerized clinical support system in a psychological laboratory focusing on internal healing where the client/patient becomes a committed partner utilizing biofeedback equipment, gaming, and simulation to achieve self-understanding and…

Computerized operator support system with new man-machine interface for BWR power plants

International Nuclear Information System (INIS)

Monta, K.; Naito, N.; Sugawara, M.; Sato, N.; Mori, N.; Tai, I.; Fukumoto, A.; Tsuchida, M.

1984-01-01

Improvement of the man-machine interface of nuclear power plants is an important contribution to the further enhancement of operational safety. In addition, recent advances in computer technology seem to offer the greatest opportunity to date for achieving improvement in the man-machine interface. The development of a computerized operator support system for BWRs has been undertaken since 1980 with the support of the Japanese Government. The conceptual design of this system is based on the role of the operators. The main functions are standby system management, disturbance analysis and post-trip operational guidance. The objective of the standby system management is to monitor the standby status of the engineered safety feature during normal operation to assure its proper functioning at the onset of emergency situations. The disturbance analysis system detects disturbances in the plant in their early stages and informs the plant operators about, for example, the cause of the disturbances, the plant status and possible propagations. Consequently, operators can take corrective actions to prevent unnecessary plant shutdown. The objective of the post trip operational guide is to support operators in diagnosis and corrective action after a plant trip. Its functions are to monitor the performance of the engineered safety feature, to identify the plant status and to guide the appropriate corrective action to achieve safe plant shutdown. The information from the computerized operator support system is supplied to operators through a colour CRT operator console. The authors have evaluated the performance of various new man-machine interfacing tools and proposed a new operator console design. A prototype system has been developed and verification/validation is proceeding with a BWR plant simulator. (author)

Experimental studies of computerized procedures and team size in nuclear power plant operations

International Nuclear Information System (INIS)

Huang, F.-H.; Hwang, S.-L.

2009-01-01

The operation of a nuclear power plant is so complex that it requires teamwork. To support team performance, a system need to provide all team members integrated information displays as well as decision aids (e.g., computerized procedures). Two experiments were conducted to investigate the effects of computerized procedures and team size on operating performance. Forty-five participants were involved in the experiments. Each participant executed decision and action tasks to deal with alarm signals, while detecting occasional system errors in the interface. Results showed that effects of computerized procedures were significant on various performance indicators, such as operation time, operation errors, and learning effect, and that two operators would be a satisfactory size in the teamwork system providing computerized procedures

Implementation of a Computerized Maintenance Management System

Science.gov (United States)

Shen, Yong-Hong; Askari, Bruce

1994-01-01

A primer Computerized Maintenance Management System (CMMS) has been established for NASA Ames pressure component certification program. The CMMS takes full advantage of the latest computer technology and SQL relational database to perform periodic services for vital pressure components. The Ames certification program is briefly described and the aspects of the CMMS implementation are discussed as they are related to the certification objectives.

Computerized x-ray radiographic system for fuel pellet measurements

International Nuclear Information System (INIS)

Green, D.R.; Karnesky, R.A.; Bromley, C.

1977-01-01

The development and operation of a computerized system for determination of fuel pellet diameters from x-ray radiography is described. Actual fuel pellet diameter measurements made with the system are compared to micrometer measurements on the same pellets, and statistically evaluated. The advantages and limitations of the system are discussed, and recommendations are made for further development

Computerized UT system for stud bolt

International Nuclear Information System (INIS)

Kisanuki, T.; Uchida, K.; Fushimi, T.; Onda, K.

1988-01-01

Cracking of stud bolts used in steam turbine casing, valve and pressure vessel has caused concern regarding the safety and reliability of power plants. In order to detect harmful cracks in early state, the improvement of UT technique is required. As regarding the ultrasonic inspection technique, a longitudinal beam technique and/or an angle beam technique are generally used. The authors report their development of a computerized UT system for bolt inspection and improvement of the angle beam technique

The Initial Development of a Computerized Operator Support System

Energy Technology Data Exchange (ETDEWEB)

Roger Lew; Ronald L Boring; Thomas A Ulrich; Ken Thomas

2014-08-01

A computerized operator support system (COSS) is a collection of resilient software technologies to assist operators in monitoring overall nuclear power plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast- moving, complex events. A prototype COSS for a chemical volume control system at a nuclear power plant has been developed in order to demonstrate the concept and provide a test bed for further research. The development process identified four underlying elements necessary for the prototype, which consist of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. An operational prototype resides at the Idaho National Laboratory (INL) using the U.S. Department of Energy’s (DOE) Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). Several human-machine interface (HMI) considerations are identified and incorporated in the prototype during this initial round of development.

The evolution of the market for commercial computerized physician order entry and computerized decision support systems for prescribing.

Science.gov (United States)

Mozaffar, Hajar; Williams, Robin; Cresswell, Kathrin; Morrison, Zoe; Bates, David W; Sheikh, Aziz

2016-03-01

To understand the evolving market of commercial off-the-shelf Computerized Physician Order Entry (CPOE) and Computerized Decision Support (CDS) applications and its effects on their uptake and implementation in English hospitals. Although CPOE and CDS vendors have been quick to enter the English market, uptake has been slow and uneven. To investigate this, the authors undertook qualitative ethnography of vendors and adopters of hospital CPOE/CDS systems in England. The authors collected data from semi-structured interviews with 11 individuals from 4 vendors, including the 2 most entrenched suppliers, and 6 adopter hospitals, and 21 h of ethnographic observation of 2 user groups, and 1 vendor event. The research and analysis was informed by insights from studies of the evolution of technology fields and the emergence of generic COTS enterprise solutions. Four key themes emerged: (1) adoption of systems that had been developed outside of England, (2) vendors' configuration and customization strategies, (3) localized adopter practices vs generic systems, and (4) unrealistic adopter demands. Evidence for our over-arching finding concerning the current immaturity of the market was derived from vendors' strategies, adopters' reactions to the technology, and policy makers' incomplete insights. The CPOE/CDS market in England is still in an emergent phase. The rapid entrance of diverse products, triggered by federal policy initiatives, has resulted in premature adoption of systems that do not yet adequately meet the needs of hospitals. Vendors and adopters lacked understanding of how to design and implement generic solutions to meet diverse user needs. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Information retrieval system based on INIS tapes

International Nuclear Information System (INIS)

Pultorak, G.

1976-01-01

An information retrieval system based on the INIS computer tapes is described. It includes the three main elements of a computerized information system: a data base on a machine -readable medium, a collection of queries which represent the information needs from the data - base, and a set of programs by which the actual retrieval is done, according to the user's queries. The system is built for the center's computer, a CDC 3600, and its special features characterize, to a certain degree, the structure of the programs. (author)

381 Developing of a Computerized Brain Diagnosing System for ...

African Journals Online (AJOL)

User

Ogunsanwo O. D. - Department of Computer Science, Gate way ICT ... computerized brain diagnosing system that would be used in carrying out the ..... This aspect explores the techniques use for the design of interface, menus and databases ...

Human engineering considerations in designing a computerized controlled access security system

International Nuclear Information System (INIS)

Moore, J.W.; Banks, W.W.

1988-01-01

This paper describes a human engineering effort in the design of a major security system upgrade at Lawrence Livermore National Laboratory. This upgrade was to be accomplished by replacing obsolete and difficult-to-man (i.e., multiple operator task actions required) security equipment and systems with a new, automated, computer-based access control system. The initial task was to assist the electronic and mechanical engineering staff in designing a computerized security access system too functionally and ergonomically accommodate 100% of the Laboratory user population. The new computerized access system was intended to control entry into sensitive exclusion areas by requiring personnel to use an entry booth-based system and/or a remote access control panel system. The primary user interface with the system was through a control panel containing a magnetic card reader, function buttons, LCD display, and push-button keypad

Benefits of a relational database for computerized management

International Nuclear Information System (INIS)

Shepherd, W.W.

1991-01-01

This paper reports on a computerized relational database which is the basis for a hazardous materials information management system which is comprehensive, effective, flexible and efficient. The system includes product information for Material Safety Data Sheets (MSDSs), labels, shipping, and the environment and is used in Dowell Schlumberger (DS) operations worldwide for a number of programs including planning, training, emergency response and regulatory compliance

Evaluation of a computerized system for mechanical ventilation of infants.

Science.gov (United States)

Tehrani, Fleur T; Abbasi, Soraya

2009-04-01

To evaluate a computerized system for mechanical ventilation of infants. FLEX is a computerized system that includes the features of a patented mode known as adaptive-support ventilation (ASV). In addition, it has many other features including adjustment of positive end-expiratory pressure (PEEP), fraction of inspired oxygen (F(IO2)), minute ventilation, and control of weaning. It is used as an open-loop decision support system or as a closed-loop technique. Blood gas and ventilation data were collected from 12 infants in the neonatal intensive care at baseline and at the next round of evaluation. This data were input to open-loop version of FLEX. The system recommendations were compared to clinical determinations. FLEX recommended values for ventilation were on the average within 25% and 16.5% of the measured values at baseline and at the next round of evaluation, respectively. For F(IO2) and PEEP, FLEX recommended values were in general agreement with the clinical settings. FLEX recommendations for weaning were the same as the clinical determinations 50% of the time at baseline and 55% of the time at the next round of evaluation. FLEX did not recommend weaning for infants with weak spontaneous breathing effort or those who showed signs of dyspnea. A computerized system for mechanical ventilation is evaluated for treatment of infants. The results of the study show that the system has good potential for use in neonatal ventilatory care. Further refinements can be made in the system for very low-birth-weight infants.

Increasing Personal Value Congruence in Computerized Decision Support Using System Feedback

Directory of Open Access Journals (Sweden)

Bryan Hosack

2014-02-01

Full Text Available The Theory of Universals in Values (TUV, a reliable and validated conceptualization of personal values used in psychology, is used to examine the effect of system feedback delivered by a Decision Support System (DSS on personal values. The results indicate that value-based decision-making behavior can be influenced by DSS feedback to address value congruence in decision-making. User behavior was shown to follow the outcomes expected by operant theory when feedback was supportive and to follow the outcomes of reactance theory when feedback was challenging. This result suggests that practitioners and Information System (IS researchers should consider user values when designing computerized decision feedback to adjust a system’s design such that the potential user backlash is avoided or congruence between organizational and personal values is achieved.

Design and development of computerized local and overall country's environmental data analysis network system

Energy Technology Data Exchange (ETDEWEB)

Kim, Chang Gyu; Kang, Jong Gyu; Han, H.; Han, J. S.; Lee, Y. D.; Lee, S. R.; Kang, D. J.; Cho, Y. G.; Yun, S. H. [Daedeok College, Taejon (Korea, Republic of)

2001-03-15

In this development, we designed a integrated database for efficient data processing of radiation-environment data and developed the CLEAN (Computerized Local and overall country's Environmental data Analysis Network) system. The CLEAN system consists of local radiation-environment network, data analysis system, data open system. We developed the CLEAN system focused on building an integrated database, a data mart, and a CLEAN web site. It is expected that the developed system, which organizes the information related to environmental radiation data systematically, can be utilize for the accurate interpretation, analysis and evaluation.

The ABC's required for establishing a practical computerized plant engineering management data base system

Science.gov (United States)

Maiocco, F. R.; Hume, J. P.

1976-01-01

A system's approach is outlined in the paper to assist facility and Plant Engineers improve their organization's data management system. The six basic steps identified may appear somewhat simple; however, adequate planning, proper resources, and the involvement of management will determine the success of a computerized facility management data base. Helpful suggestions are noted throughout the paper to insure the development of a practical computerized data management system.

Information system INIS

International Nuclear Information System (INIS)

Kyncl, J.

1979-01-01

INIS is the abbreviation for the International Nuclear Information System operated by IAEA in cooperation with its member countries. The function of the INIS system whose aim is to provide the member countries with information on nuclear literature is based on the decentralized input data preparation, centralized checking and on the creation of a unified data base and on the decentralized output materials processing. Czechoslovakia is represented in INIS by the Nuclear Information Centre which has been taking active part in the building and development of INIS since its very beginning. It provides for the use of output INIS materials by users in Czechoslovakia, this by means of a computerized network. The Czechoslovak Nuclear Information Centre has since 1978 been using a teleprocessing terminal connected to the IAEA central processor by means of a telephone line, which allows direct access to the INIS data base. (Ha)

Shuttle Program Information Management System (SPIMS) data base

Science.gov (United States)

1983-01-01

The Shuttle Program Information Management System (SPIMS) is a computerized data base operations system. The central computer is the CDC 170-730 located at Johnson Space Center (JSC), Houston, Texas. There are several applications which have been developed and supported by SPIMS. A brief description is given.

45 CFR 310.25 - What conditions apply to acquisitions of Computerized Tribal IV-D Systems?

Science.gov (United States)

2010-10-01

... FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION Funding for Computerized Tribal IV-D Systems and Office Automation § 310.25 What conditions apply to... 45 Public Welfare 2 2010-10-01 2010-10-01 false What conditions apply to acquisitions of...

Disposal Site Information Management System

International Nuclear Information System (INIS)

Larson, R.A.; Jouse, C.A.; Esparza, V.

1986-01-01

An information management system for low-level waste shipped for disposal has been developed for the Nuclear Regulatory Commission (NRC). The Disposal Site Information Management System (DSIMS) was developed to provide a user friendly computerized system, accessible through NRC on a nationwide network, for persons needing information to facilitate management decisions. This system has been developed on NOMAD VP/CSS, and the data obtained from the operators of commercial disposal sites are transferred to DSIMS semiannually. Capabilities are provided in DSIMS to allow the user to select and sort data for use in analysis and reporting low-level waste. The system also provides means for describing sources and quantities of low-level waste exceeding the limits of NRC 10 CFR Part 61 Class C. Information contained in DSIMS is intended to aid in future waste projections and economic analysis for new disposal sites

The Development of CPSES Plug-in(CPMP) for APR1400 Computerized Procedure Effective Maintenance

Energy Technology Data Exchange (ETDEWEB)

Seong, No Kyu; Park, Jin Kyun; Jung, Yeon Sub [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2014-10-15

The Computerized Procedure System (CPS) is one of the Man Machine Interface (MMI) resources of the Shin-Kori 3 and 4 nuclear power plants. The CPS is a computerized operator support system that enables operating crew to execute procedures in an accurate and fast manner. The Computerized Procedure (CP) is the XML data file in executable format that can be installed in the Procedure eXecution System (PXS) for execution. The CP contains specific information related to a particular procedure (i.e. LOCA). These computerized procedures such as Alarm Response Procedures (ARP) are separated into individual alarm procedure to maximize function interface between CPS and DCS. E.g. 'Procedure open by alarm list'. The procedure writer's burden to manage many procedures has been increased because of separated procedures. This paper introduces Computerized Procedure System Engineering System (CPSES) plug-in that is computerized procedure management program (CPMP) to reduce procedure writer's burden. This paper introduces the main features of CPMP. CPMP reduces procedure writer's or CPX maintainer's burden. This program is implemented and tested by program design requirement.

Technologies in computerized lexicography | Kruyt | Lexikos

African Journals Online (AJOL)

Although the topic of this paper is technology, focus is on functional rather than technical aspects of computerized lexicography. Keywords: computerized lexicography, electronic dictionary, electronic text corpus, lexicographer's workbench, integrated language database, automatic linguistic analysis, information retrieval, ...

A computerized faculty time-management system in an academic family medicine department.

Science.gov (United States)

Daugird, Allen J; Arndt, Jane E; Olson, P Richard

2003-02-01

The authors describe the development, implementation, and evaluation of a computerized faculty time-management system (FTMS) in the Department of Family Medicine at the University of North Carolina-Chapel Hill. The FTMS is presented as an integrated set of computerized spreadsheets used annually to allocate faculty time across all mission activities of the department. It was first implemented in 1996 and has been continuously developed since then. An iterative approach has been used to gain consensus among faculty about time resources needed for various tasks of all missions of the department. These time-resource assumptions are used in the computerized system. Faculty time is allocated annually by the department vice chair in negotiation with individual faculty, making sure that the activities planned do not exceed the work time each faculty member has available for the year. During this process, faculty preferences are balanced against department aggregate needs to meet mission commitments and obligations. The authors describe how the computerized FTMS is used for faculty time management and career development, department planning, budget planning, clinical scheduling, and mission cost accounting. They also describe barriers and potential abuses and the challenge of building an organizational culture willing to discuss faculty time openly and committed to developing a system perceived as fair and accurate. The spreadsheet file is available free from the authors for use in other departments.

Computerized adaptive testing in computer assisted learning?

NARCIS (Netherlands)

Veldkamp, Bernard P.; Matteucci, Mariagiulia; Eggen, Theodorus Johannes Hendrikus Maria; De Wannemacker, Stefan; Clarebout, Geraldine; De Causmaecker, Patrick

2011-01-01

A major goal in computerized learning systems is to optimize learning, while in computerized adaptive tests (CAT) efficient measurement of the proficiency of students is the main focus. There seems to be a common interest to integrate computerized adaptive item selection in learning systems and

Seize the data (Carpe data) : wave of computerized data capture technology sweeps drilling industry

Energy Technology Data Exchange (ETDEWEB)

Mahoney, J.

1999-02-01

The computerization of all aspects of the monitoring and collection of well drilling information is discussed. Global Link International Inc. of Calgary, has developed a computerized system for tracking and recording drilling data. This operations recording database is named the Electronic Tour Book (ETB). It is similar to the Electronic Tour Sheet (ETS) developed by Chimo Equipment Ltd. of Alberta. Both Windows-based systems represent computerized reporting mechanisms for operators, producers, loggers and rig-managers. Another Alberta company, Ryan Energy Technologies Inc., has begun marketing the Tru Vu Fusion system of hardware and software, yet another system for gathering and recording drilling data. Tru Vu Fusion can capture data and display it in a format that everybody at the wellsite can use for decision making. Another drilling data management system, entitled INSITE (for Integrated System for Information Technology and Engineering) is marketed by Sperry-Sun Drilling Services. While INSITE is intended primarily for offshore drilling applications, it can be used onshore with equal success. 4 figs.

Computerized system of team make-up and work allocation in the Belgian Zolder mine

Energy Technology Data Exchange (ETDEWEB)

Rustanowicz, M.

1979-01-01

System of work allocation introduced in 1974 in the Zolder Coal Mine (NV Kempense Steenkolenmijnen) in Belgium is evaluated. The system is based on an IBM 370/158 computer. An information management system supervises the programing work. There are approximately 30 programs. Absenteeism in the Belgian coal mines is generally high at approximately 24% and some months as high as 40%. Therefore, introducing a computerized system of work allocation and team make-up was advantageous. Operation of the system is described on the levels of foreman, engineers and director of the mine. Advantages of the system are numerous. It enables optimization of team make-up and work allocation, shortens the time of allocation of work by a foreman, increases efficiency of foremen's work and provides the director with the means and information necessary for efficient decision making in improving the productivity of the mine. (5 refs.) (In Polish)

Cognitive task analysis and the design of computerized operator aids

International Nuclear Information System (INIS)

Andersson, H.

1985-01-01

The new technological possibilities have led to the initiation of many projects for the design and evaluation of computerized operator support systems to be implemented in nuclear power plant control rooms. A typical finding so far has been that operators often have a positive attitude towards such systems but still don't use them very much, mostly because they find almost the same information on the conventional control boards which they are accustomed to use. Still, however, there is a widely shared belief that conventional control rooms have short-comings that make the use of computerized aids necessary. One reason for the limited success so far is that the new systems often are poorly integrated with the existing conventional instrumentation and with the working procedures. The reluctance to use new computer based aids, despite their nice features, is therefore probably caused by an inadequate task analysis made prior to the design of these computerized operator support systems

Quantitative inspection by computerized tomography

International Nuclear Information System (INIS)

Lopes, R.T.; Assis, J.T. de; Jesus, E.F.O. de

1989-01-01

The computerized Tomography (CT) is a method of nondestructive testing, that furnish quantitative information, that permit the detection and accurate localization of defects, internal dimension measurement, and, measurement and chart of the density distribution. The CT technology is much versatile, not presenting restriction in relation to form, size or composition of the object. A tomographic system, projected and constructed in our laboratory is presented. The applications and limitation of this system, illustrated by tomographyc images, are shown. (V.R.B.)

Critical Theory as a foundation for Pragmatic Information Systems Design

OpenAIRE

Gerald Benoît

2001-01-01

This paper considers how designers of information systems and end-user perspectives, communication models and linguistic behaviors differ. A critique of these differences is made by applying Habermas's communicative action principles. An empirical study of human-human information seeking, based on those principles, indicates which behaviors are predictors of successful interactions and so are candidate behaviors may be integrated into computerized information systems.

A toolkit for computerized operating procedure of complex industrial systems with IVI-COM technology

International Nuclear Information System (INIS)

Zhou Yangping; Dong Yujie; Huang Xiaojing; Ye Jingliang; Yoshikawa, Hidekazu

2013-01-01

A human interface toolkit is proposed to help the user develop computerized operating procedure of complex industrial system such as Nuclear Power Plants (NPPs). Coupled with a friendly graphical interface, this integrated tool includes a database, a procedure editor and a procedure executor. A three layer hierarchy is adopted to express the complexity of operating procedure, which includes mission, process and node. There are 10 kinds of node: entrance, exit, hint, manual input, detector, actuator, data treatment, branch, judgment and plug-in. The computerized operating procedure will sense and actuate the actual industrial systems with the interface based on IVI-COM (Interchangeable Virtual Instrumentation-Component Object Model) technology. A prototype system of this human interface toolkit has been applied to develop a simple computerized operating procedure for a simulated NPP. (author)

Computerized waste-accountability shipping and packaging system

International Nuclear Information System (INIS)

Jackson, J.A.; Baston, M. Jr.; DeVer, E.A.

1981-01-01

The Waste Accountability, Shipping and Packaging System (WASP) is a real-time computerized system designed and implemented by Mound Facility to meet the stringent packaging and reporting requirements of radioactive waste being shipped to burial sites. The system stores packaging data and inspection results for each unit and prepares all necessary documents at the time of shipment. Shipping data specific for each burial site are automatically prepared on magnetic tape for transmission to the computing center at that site. WASP has enabled Mound Facility to effectively meet the requirements of the burial sites, diminishing the possibility of being rejected from a site because of noncompliance

FEMA's Integrated Emergency Management Information System (IEMIS)

International Nuclear Information System (INIS)

Jaske, R.T.; Meitzler, W.

1987-01-01

FEMA is implementing a computerized system for use in optimizing planning, and for supporting exercises of these plans. Called the Integrated Emergency Management Information System (IEMIS), it consists of a base geographic information system upon which analytical models are superimposed in order to load data and report results analytically. At present, it supports FEMA's work in offsite preparedness around nuclear power stations, but is being developed to deal with a full range of natural and technological accident hazards for which emergency evacuation or population movement is required

The development of an advanced information management system

International Nuclear Information System (INIS)

Kim, Seung Hwan

2005-01-01

Performing a PSA requires a lot of data to analyze, to evaluate the risk, to trace the process of results and to verify the results. KAERI is developing a PSA information database system, AIMS (Advanced Information Management System for PSA). The objective of AIMS development is to integrate and computerize all the distributed information of a PSA into a system and to enhance the accessibility to PSA information for all PSA related activities. We designed the PSA information database system for the following purposes: integrated PSA information management software, sensitivity analysis, quality assurance, anchor to another reliability database. The AIMS consists of a PSA Information database, Information browsing (searching) modules, and PSA automatic quantification manager modules

The development of an advanced information management system

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Hwan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2005-07-01

Performing a PSA requires a lot of data to analyze, to evaluate the risk, to trace the process of results and to verify the results. KAERI is developing a PSA information database system, AIMS (Advanced Information Management System for PSA). The objective of AIMS development is to integrate and computerize all the distributed information of a PSA into a system and to enhance the accessibility to PSA information for all PSA related activities. We designed the PSA information database system for the following purposes: integrated PSA information management software, sensitivity analysis, quality assurance, anchor to another reliability database. The AIMS consists of a PSA Information database, Information browsing (searching) modules, and PSA automatic quantification manager modules.

45 CFR 307.10 - Functional requirements for computerized support enforcement systems in operation by October 1...

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Functional requirements for computerized support... ENFORCEMENT SYSTEMS § 307.10 Functional requirements for computerized support enforcement systems in operation... necessary to meet Federal Reporting Requirements on a timely basis as prescribed by the Office; (4...

CRRIS: a computerized radiological risk-investigation system

International Nuclear Information System (INIS)

Baes, C.F. III; Miller, C.W.

1981-01-01

The US Environmental Protection Agency (EPA) is responsible for regulating radioactive airborne effluents in the US. A comprehensive, integrated Computerized Radiological Risk Investigation System (CRRIS) is being developed to support EPA's radiation standards development. This modular system consists primarily of five computer codes and their supporting data bases for estimating environmental transport and radiation doses and risks. Health effects are estimated on the basis of a life-table methodology developed by EPA. CRRIS is designed to provide EPA with a reasonable and flexible way of assessing the risk to man associated with radionuclide releases to the atmosphere

Potential of Computerized Maintenance Management System in Facilities Management

Directory of Open Access Journals (Sweden)

Noor Farisya Azahar

2014-07-01

Full Text Available For some time it has been clear that managing buildings or estates has been carried out in the context of what has become known as facilities management. British Institute of Facilities Management defined facilities management is the integration of multi-disciplinary activities within the built environment and the management of their impact upon people and the workplace. Effective facilities management is vital to the success of an organisation by contributing to the delivery of its strategic and operational objectives. Maintenance of buildings should be given serious attention before (stage design, during and after a building is completed. But total involvement in building maintenance is after the building is completed and during its operations. Residents of and property owners require their building to look attractive, durable and have a peaceful indoor environment and efficient. The objective of the maintenance management system is to stream line the vast maintenance information system to improve the productivity of an industrial plant. a good maintenance management system makes equipment and facilities available. This paper will discuss the fundamental steps of maintenance management program and Computerized Maintenance Management System (CMMS

Southern Pine Beetle Information System (SPBIS)

Science.gov (United States)

Valli Peacher

2011-01-01

The southern pine beetle (SPB) is the most destructive forest insect in the South. The SPB attacks all species of southern pine, but loblolly and shortleaf are most susceptible. The Southern Pine Beetle Information System (SPBIS) is the computerized database used by the national forests in the Southern Region for tracking individual southern pine beetle infestations....

Quality criteria in computerized tomography of the chest

International Nuclear Information System (INIS)

Doehring, W.

1985-01-01

The quality of thoracical computerized tomography (CT) - like any other CT examination - depends from the quality of the equipment used, from the skill of the examinor and the properties of the patient. Concerning computerized chest tomograms, rapid scan equipment should be used only and slow translation - rotation systems should not be used any more. Whereas the quality of computerized tomograms may be influenced by the patient in the scanning process only, the examining physician will decisively influence the possible informative value of the examination also in the reconstruction of the CT value matrix, in single demonstration of CT values and, possibly, in additional measurement value processing as well as in the interpretation of findings. Use of equipment should always consider the technical potential provided by the equipment to be oriented to the clinical issue, and the conditions preset by the patient. (orig.) [de

Development and implementation of computerized operator support systems in nuclear installations

International Nuclear Information System (INIS)

1994-01-01

This report has been prepared to address the development and implementation of computerized operator support systems (COSS) in nuclear installations. The requirements of operators in information management and job performance in a control room environment are discussed. These requirements, which must be agreed to by the operators, provide a focus for the developers of COSS for implementation in an operational environment. The design methodology presents good practice approaches derived from the experience gained and the lessons learned during actual development of the COSS. The team concept, pilot study and structured step by step phases of software development and implementation should help COSS developers to achieve the level of quality and reliability required. 8 figs, 1 tab

Systems approach to chemical spill response information needs

Energy Technology Data Exchange (ETDEWEB)

Parnarouskis, M.C.; Flessner, M.F.; Potts, R.G.

1980-01-01

The Chemical Hazards Response Information System (CHRIS) has been specifically designed to meet the emergency needs of US Coast Guard field personnel, currently providing them with information on 900 hazardous chemicals, with methods of predicting hazards resulting from accidental discharges, and with procedures for selecting and implementing response to accident discharges. The major components of CHRIS and the computerized hazard assessment models within the Hazard Assessment Computer System are described in detail.

Computerized reactor monitor and control for research reactors

International Nuclear Information System (INIS)

Buerger, L.; Vegh, E.

1981-09-01

The computerized process control system developed in the Central Research Institute for Physics, Budapest, Hungary, is described together with its special applications at research reactors. The nuclear power of the Hungarian research reactor is controlled by this computerized system, too, while in Lybia many interesting reactor-hpysical calculations are built into the computerized monitor system. (author)

Assessment of Pharmacy Information System Performance in Three Hospitals in Eastern Province, Saudi Arabia.

Science.gov (United States)

El Mahalli, Azza; El-Khafif, Sahar H; Yamani, Wid

2016-01-01

The pharmacy information system is one of the central pillars of a hospital information system. This research evaluated a pharmacy information system according to six aspects of the medication process in three hospitals in Eastern Province, Saudi Arabia. System administrators were interviewed to determine availability of functionalities. Then, system users within the hospital were targeted to evaluate their level of usage of these functionalities. The study was cross-sectional. Two structured surveys were designed. The overall response rate of hospital users was 31.7 percent. In all three hospitals studied, the electronic health record is hybrid, implementation has been completed and the system is running, and the systems have computerized provider order entry and clinical decision support. Also, the pharmacy information systems are integrated with the electronic health record, and computerized provider order entry and almost all prescribing and transcription functionalities are available; however, drug dispensing is a mostly manual process. However, the study hospitals do not use barcode-assisted medication administration systems to verify patient identity and electronically check dose administration, and none of them have computerized adverse drug event monitoring that uses the electronic health record. The numbers of users who used different functionalities most or all of the time was generally low. The highest frequency of utilization was for patient administration records (56.8 percent), and the lowest was for linkage of the pharmacy information system to pharmacy stock (9.1 percent). Encouraging users to use different functionalities was highly recommended.

Information Processing in Nursing Information Systems: An Evaluation Study from a Developing Country.

Science.gov (United States)

Samadbeik, Mahnaz; Shahrokhi, Nafiseh; Saremian, Marzieh; Garavand, Ali; Birjandi, Mahdi

2017-01-01

In recent years, information technology has been introduced in the nursing departments of many hospitals to support their daily tasks. Nurses are the largest end user group in Hospital Information Systems (HISs). This study was designed to evaluate data processing in the Nursing Information Systems (NISs) utilized in many university hospitals in Iran. This was a cross-sectional study. The population comprised all nurse managers and NIS users of the five training hospitals in Khorramabad city ( N = 71). The nursing subset of HIS-Monitor questionnaire was used to collect the data. Data were analyzed by the descriptive-analytical method and the inductive content analysis. The results indicated that the nurses participating in the study did not take a desirable advantage of paper (2.02) and computerized (2.34) information processing tools to perform nursing tasks. Moreover, the less work experience nurses have, the further they utilize computer tools for processing patient discharge information. The "readability of patient information" and "repetitive and time-consuming documentation" were stated as the most important expectations and problems regarding the HIS by the participating nurses, respectively. The nurses participating in the present study used to utilize paper and computerized information processing tools together to perform nursing practices. Therefore, it is recommended that the nursing process redesign coincides with NIS implementation in the health care centers.

Computerized provider order entry systems.

Science.gov (United States)

2001-01-01

Computerized provider order entry (CPOE) systems are designed to replace a hospital's paper-based ordering system. They allow users to electronically write the full range of orders, maintain an online medication administration record, and review changes made to an order by successive personnel. They also offer safety alerts that are triggered when an unsafe order (such as for a duplicate drug therapy) is entered, as well as clinical decision support to guide caregivers to less expensive alternatives or to choices that better fit established hospital protocols. CPOE systems can, when correctly configured, markedly increase efficiency and improve patient safety and patient care. However, facilities need to recognize that currently available CPOE systems require a tremendous amount of time and effort to be spent in customization before their safety and clinical support features can be effectively implemented. What's more, even after they've been customized, the systems may still allow certain unsafe orders to be entered. Thus, CPOE systems are not currently a quick or easy remedy for medical errors. ECRI's Evaluation of CPOE systems--conducted in collaboration with the Institute for Safe Medication Practices (ISMP)--discusses these and other related issues. It also examines and compares CPOE systems from three suppliers: Eclipsys Corp., IDX Systems Corp., and Siemens Medical Solutions Health Services Corp. Our testing focuses primarily on the systems' interfacing capabilities, patient safeguards, and ease of use.

Immunization Information System and Informatics to Promote Immunizations: Perspective From Minnesota Immunization Information Connection.

Science.gov (United States)

Muscoplat, Miriam Halstead; Rajamani, Sripriya

2017-01-01

The vision for management of immunization information is availability of real-time consolidated data and services for all ages, to clinical, public health, and other stakeholders. This is being executed through Immunization Information Systems (IISs), which are population-based and confidential computerized systems present in most US states and territories. Immunization Information Systems offer many functionalities, such as immunization assessment reports, client follow-up, reminder/recall feature, vaccine management tools, state-supplied vaccine ordering, comprehensive immunization history, clinical decision support/vaccine forecasting and recommendations, data processing, and data exchange. This perspective article will present various informatics tools in an IIS, in the context of the Minnesota Immunization Information Connection.

Improvements in Logic Diagram of Computerized Procedure System of APR1400

Energy Technology Data Exchange (ETDEWEB)

Kang, Sungkweon; Seong, Nokyu [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The Computerized Procedure System (CPS) has been improved since it is installed in Shin-Kori 3 and 4 Nuclear Power Plants. It is one of operating support systems of digital Main Control Room (MCR) and provides many functions to operators in executing the procedure. CPS can effectively remove the human errors by supporting the procedure flow and logic diagram. This paper describes the logic diagram of CPS of reference power plant and shows the improved logic diagram of CPS of Shin-Kori unit 5 and 6. This paper describes the current logic diagram of CPS and suggests improved design for logic diagram. The improved logic diagram shall be validated through human factors engineering verification and validation. The improved design will help operators execute the computerized procedure fast and remove the human error.

Computerized systems for on-line management of failures: a state-of-the-art discussion of alarm systems and diagnostic systems applied in the nuclear industry

International Nuclear Information System (INIS)

Kim, I.S.

1994-01-01

It is now well perceived in the nuclear industry that improving plant information systems is vital for enhancing the operational safety of nuclear power plants. Considerable work is underway worldwide to support operators' decision-making, particularly in their difficult tasks of managing process anomalies on-line. The work includes development of (1) advanced alarm systems, such as various kinds of computer-based alarm processing systems, Critical Function Monitoring System, Success Path Monitoring System and Safety Assessment System II, and (2) real-timer diagnostic systems, such as Disturbance Analysis System, Maryland Operator Advisory System II, Model-Integrated Diagnostic Analysis System, Diagnosis System using Knowledge Engineering Technique, Detailed Diagnosis, and Operator Advisor System. This paper presents a state-of-the-art review of plant information systems for on-line management of failures in nuclear power plants, focusing on the methodological features of computerized alarm systems and diagnostic systems. (author)

45 CFR 310.40 - What requirements apply for accessing systems and records for monitoring Computerized Tribal IV-D...

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false What requirements apply for accessing systems and records for monitoring Computerized Tribal IV-D Systems and Office Automation? 310.40 Section 310.40... COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION Accountability and Monitoring Procedures for...

Computerized 50 liter volume calibration system

International Nuclear Information System (INIS)

Proffitt, T.H.

1990-01-01

A system has been designed for the Savannah River Site that will be used to calibrate product shipping containers. For accountability purposes, it is necessary that these containers be calibrated to a very high precision. The Computerized 50 Liter Volume Calibration System (CVCS), which is based on the Ideal Gas Law (IGL), will use reference volumes with precision of no less ±0.03%, and helium to calibrate the containers to have a total error of no greater than ±0.10%. A statistical interpretation of the system has given a theoretical total calculated error of ±0.08%. Tests with the system will be performed once fabrication is complete to experimentally verify the calculated error. Since the total error was calculated using the worst case scenario, the actual error should be significantly less than the calculated value. The computer controlled, totally automated system is traceable to the National Institute of Standards and Technology. The design, calibration procedure, and statistical interpretation of the system will be discussed. 1 ref

Development of a PSA information database system

International Nuclear Information System (INIS)

Kim, Seung Hwan

2005-01-01

The need to develop the PSA information database for performing a PSA has been growing rapidly. For example, performing a PSA requires a lot of data to analyze, to evaluate the risk, to trace the process of results and to verify the results. PSA information database is a system that stores all PSA related information into the database and file system with cross links to jump to the physical documents whenever they are needed. Korea Atomic Energy Research Institute is developing a PSA information database system, AIMS (Advanced Information Management System for PSA). The objective is to integrate and computerize all the distributed information of a PSA into a system and to enhance the accessibility to PSA information for all PSA related activities. This paper describes how we implemented such a database centered application in the view of two areas, database design and data (document) service

Computerized tomography in myotonic dystrophy

International Nuclear Information System (INIS)

Gellerich, I.; Mueller, D.; Koch, R.D.

1986-01-01

Besides clinical symptoms, progress and electromyography computerized tomography improves the diagnostics of myotonic dystrophy. Even small changes in muscular structure are detectable and especially the musculus soleus exhibits early and pronounced alterations. By means of density distribution pattern an improved characterization of the disease is possible. Additional information is obtained by cerebral computerized tomography. Atrophy of brain tissue is to be expected in all patients with myotonic dystrophy. (author)

Improved Design of Crew Operation in Computerized Procedure System of APR1400

Energy Technology Data Exchange (ETDEWEB)

Seong, No Kyu; Jung, Yeon Sub; Sung, Chan Ho [KHNP, Daejeon (Korea, Republic of)

2016-05-15

The operators perform the paper-based procedures in analog-based conventional main control room (MCR) depending on only communications between operators except a procedure controller such as a Shift Supervisor (SS), however in digital-based MCR the operators can confirm the procedures simultaneously in own console when the procedure controller of computerized procedure (CP) opens the CP. The synchronization and a synchronization function between procedure controller and other operators has to be considered to support the function of crew operation. This paper suggests the improved design of crew operation in computerized procedure system of APR1400. This paper suggests the improved design of APR1400 CPS. These improvements can help operators perform the crew procedures more efficiently. And they reduce a burden of communication and misunderstanding of computerized procedures. These improvements can be applied to CPS after human factors engineering verification and validation.

[Computerization and the importance of information in health system, as in health care resources registry].

Science.gov (United States)

Troselj, Mario; Fanton, Davor

2005-01-01

The possibilities of creating a health care resources registry and its operating in Croatia as well as the importance of information in health system are described. At the Croatian Institute of Public Health, monitoring of human resources is performed through the national Health Workers Registry. It also covers basic data on all health units, bed capacities of health facilities included. The initiated health care computerization has urged the idea of forming one more database on physical resources, i.e. on registered medical devices and equipment, more complete. Linking these databases on health resources would produce a single Health Care Resources Registry. The concept views Health Care Resources Registry as part of the overall health information system with centralized information on the health system. The planned development of segments of a single health information system is based on the implementation of the accepted international standards and common network services. Network services that are based on verified Internet technologies are used within a safe, reliable and closed health computer network, which makes up the health intranet (WAN--Wide Area Network). The resource registry is a software solution based on the relational database that monitors history, thus permitting the data collected over a longer period to be analyzed. Such a solution assumes the existence of a directory service, which would replace the current independent software for the Health Workers Registry. In the Health Care Resources Registry, the basic data set encompasses data objects and attributes from the directory service. The directory service is compatible with the LDAP protocol (Lightweight Directory Access Protocol), providing services uniformly to the current records on human and physical resources. Through the storage of attributes defined according to the HL7 (Health Level Seven) standard, directory service is accessible to all applications of the health information system

Power reactor information system (PRIS)

International Nuclear Information System (INIS)

1989-06-01

Since the very beginning of commercial operation of nuclear power plants, the nuclear power industry worldwide has accumulated more than 5000 reactor years of experience. The IAEA has been collecting Operating Experience data for Nuclear Power Plants since 1970 which were computerized in 1980. The Agency has undertaken to make Power Reactor Information System (PRIS) available on-line to its Member States. The aim of this publication is to provide the users of PRIS from their terminals with description of data base and communication systems and to show the methods of accessing the data

Auditing of the Computerised Information Systems in the Military Organization

Directory of Open Access Journals (Sweden)

Pîrvuţ Valentin

2016-06-01

Full Text Available An internal public auditing mission is a complex process with multiple objectives and auditable objects, which offers a most complete management of the audited entity’s identified risks and proposes solutions and recommendations for limiting their impact. In the informatics segment, the calculators, informatics systems (the operation systems, the informatics applications used in the entity, the accounting management systems of the data bases, the communication networks, the procedures and operations adjacent to the informatics systems, the policies in the system are subjected to control and evaluation. To this end, due to the importance the use of the calculator grants within the entities, in some countries there have been elaborated several normative acts regulating the use, control and auditing of the electronic devices used for processing the data. Thus, the most important regulations referring to the auditing within the computerized information systems (CIS - Computerized Information Systems are the ISA ( International Standards on Auditing and IAPS ( International Auditing Practice Statement standards elaborated by IFAC ( International Federation of Accountants.

Energy for agriculture. A computerized information retrieval system

Energy Technology Data Exchange (ETDEWEB)

Stout, B.A.; Myers, C.A. (comps.)

1979-12-01

Energy may come from the sun or the earth or be the product of plant materials or agricultural wastes. Whatever its source, energy is indispensable to our way of life, beginning with the production, processing, and distribution of abundant, high quality food and fiber supplies. This specialized bibliography on the subject of energy for agriculture contains 2613 citations to the literature for 1973 through May 1979. Originally issued by Michigan State University (MSU), it is being reprinted and distributed by the U.S. Department of Agriculture. The literature citations will be incorporated into AGRICOLA (Agricultural On-Line Access), the comprehensive bibliographic data base maintained by Technical Information Systems (TIS), a component of USDA's Science and Education Administration (SEA). The citations and the listing of research projects will be combined with other relevant references to provide a continuously updated source of information on energy programs in the agricultural field. No abstracts are included.

Formal Verification of Computerized Procedure with Colored Petri Nets

International Nuclear Information System (INIS)

Kim, Yun Goo; Shin, Yeong Cheol

2008-01-01

Computerized Procedure System (CPS) supports nuclear power plant operators in performing operating procedures which are instructions to guide in monitoring, decision making and controlling nuclear power plants. Computerized Procedure (CP) should be loaded to CPS. Due to its execution characteristic, computerized procedure acts like a software in CPS. For example, procedure flows are determined by operator evaluation and computerized procedure logic which are pre-defined. So the verification of Computerized Procedure logic and execution flow is needed before computerized procedures are installed in the system. Formal verification methods are proposed and the modeling of operating procedures with Coloured Petri Nets(CP-nets) is presented

E/Z MAS: An easy-to-use computerized materials control and accountability system

International Nuclear Information System (INIS)

Anderson, L.K.; Boor, M.G.; Hurford, J.M.; Landry, R.P.; Martinez, B.J.; Solem, A.M.; Whiteson, R.; Zardecki, A.

1998-01-01

Nuclear facilities that handle and process nuclear materials are required to track their nuclear holdings and to keep adequate records that manage and control the inventory of those holdings. The complexity of a system that does this job is directly proportional to the complexity of the facility's operations. This paper describes an approach to computerized materials protection, control, and accountability (MPC and A) that was introduced by Los Alamos National Laboratory (LANL) in the fall of 1997. This new system, E/Z MAS, is the latest addition to the LANL suite of computerized MPC and A tools, which also includes the CoreMAS system. E/Z MAS was initially designed to address the needs of those facilities that have small to modest MPC and A needs but has been expanded to provide full functionality for any facility. The system name, E/Z MAS, reflects the system's easy-to-use characteristics, which include ease of installation and ease of software maintenance. Both CoreMAS and E/Z MAS have been provided to facilities in the Former Soviet Union to assist them in implementing a computerized MPC and A system that meets their needs. In this paper the authors will address the functionality of CoreMAS and E/Z MAS, and an argument in favor of intranet-based material control and accountability will be advanced

Computerized low-level waste assay system operation manual

International Nuclear Information System (INIS)

Jones, D.F.; Cowder, L.R.; Martin, E.R.

1976-01-01

An operation and maintenance manual for the computerized low-level waste box counter is presented, which describes routine assay techniques as well as theory of operation treated in sufficient depth so that an experienced assayist can make nonroutine assays. In addition, complete system schematics are included, along with a complete circuit description to facilitate not only maintenance and troubleshooting, but also reproduction of the instrument if desired. Complete software system descriptions are included so far as calculational algorithms are concerned, although detailed instruction listings would have to be obtained from Group R-1 at LASL in order to make machine-language code changes

Computerized radionuclidic analysis in production facilities

International Nuclear Information System (INIS)

Gibbs, A.

1978-03-01

The Savannah River Plant Laboratories Department has been using a dual computer system to control all radionuclidic pulse height analyses since 1971. This computerized system analyzes 7000 to 8000 samples per month and has allowed the counting room staff to be reduced from three persons to one person. More reliable process information is being returned to the production facilities and for environmental evaluations and being returned faster, even though the sample load has more than tripled. This information is now more easily retrievable for other evaluations. The computer is also used for mass spectrometer data reduction and for quality control data analysis. The basic system is being expanded by interfacing microcomputers which provide data input from all of the laboratory modules for quality assurance programs

Computerized real-time materials accountability system for safeguards material control

International Nuclear Information System (INIS)

Spencer, W.F.; Affel, R.G.; Austin, H.C.; Nichols, J.P.; Stoutt, B.H.; Wachter, J.W.

1975-01-01

A real-time, computer-based system is described which provides safeguards material control at the Oak Ridge National Laboratory. Originally installed in 1972 to provide computerized real-time fissile materials accountability for criticality control purposes, the system has been expanded to provide accountability of all source and nuclear materials (SNM) and to utilize the on-line inventory files in support of the Laboratory physical protection and surveillance procedures. (auth)

Use of computerized data acquisition system to auralize NDE data for improved inspection capability

International Nuclear Information System (INIS)

Light, Glenn M.; Holt, Amos E.; Polk, Kent D.; Clayton, William T.

2004-01-01

Southwest Research Institute has developed computer-aided technology for converting electronic signals generated by conventional nondestructive evaluation (NDE) equipment (i.e., ultrasonic, eddy current, and acoustic emission) into audible information so that the inspector can make use of both the conventional NDE signals (which are often confusing) and the audible information to make a flaw/nonflaw decision. One objective of this work was to develop a computerized data acquisition system that could collect ultrasonic data, perform time dilation of the ultrasonic data, and help develop algorithms. The aural technology has been applied to composite impact damage, composite delamination detection, and corrosion detection. In addition, the aural technology was used to detect and discriminate intergranular stress corrosion cracking. Examples of application of aural NDE technology are described. (author)

Effects of computerized clinical decision support systems on practitioner performance and patient outcomes: Methods of a decision-maker-researcher partnership systematic review

OpenAIRE

Wilczynski Nancy L; Haynes R Brian

2010-01-01

Abstract Background Computerized clinical decision support systems are information technology-based systems designed to improve clinical decision-making. As with any healthcare intervention with claims to improve process of care or patient outcomes, decision support systems should be rigorously evaluated before widespread dissemination into clinical practice. Engaging healthcare providers and managers in the review process may facilitate knowledge translation and uptake. The objective of this...

45 CFR 310.35 - Under what circumstances would emergency FFP be available for Computerized Tribal IV-D Systems?

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Under what circumstances would emergency FFP be... AND OFFICE AUTOMATION Funding for Computerized Tribal IV-D Systems and Office Automation § 310.35 Under what circumstances would emergency FFP be available for Computerized Tribal IV-D Systems? (a...

Freight Transportation Information Systems and Their Implications for R&D Policy

Science.gov (United States)

1974-03-01

The current use of computerized management information and control systems in intercity freight transportation are examined. Each of the four modes (railroad, motor carrier, maritime and air cargo industries) is investigated. In each case, computer i...

Comparison of Computer-Based Versus Counselor-Based Occupational Information Systems with Disadvantaged Vocational Students

Science.gov (United States)

Maola, Joseph; Kane, Gary

1976-01-01

Subjects, who were Occupational Work Experience students, were randomly assigned to individual guidance from either a computerized occupational information system, to a counselor-based information system or to a control group. Results demonstrate a hierarchical learning effect: The computer group learned more than the counseled group, which…

Reducing drug–herb interaction risk with a computerized reminder system

Science.gov (United States)

Lin, Sheng-Shing; Tsai, Chiu-Lin; Tu, Ching-Yeh; Hsieh, Ching-Liang

2015-01-01

Background Traditional Chinese medicine (TCM) and Western medicine are both popular in Taiwan. Approximately 14.1% of Taiwanese residents use Western drugs and Chinese herbs concurrently; therefore, drug–herb interaction is critical to patient safety. This paper presents a new procedure for reducing the risk of drug interactions. Methods Hospital computer systems are modified to ensure that drug–herb interactions are automatically detected when a TCM practitioner is writing a prescription. A pop-up reminder appears, warning of interactions, and the practitioner may adjust doses, delete herbs, or leave the prescription unchanged. A pharmacist will receive interaction information through the system and provide health education to the patient. Results During the 2011–2013 study period, 256 patients received 891 herbal prescriptions with potential drug–herb interactions. Three of the 50 patients who concurrently used ginseng and antidiabetic drugs manifested hypoglycemia (fasting blood sugar level ≤70 mg/dL). Conclusion Drug–herb interactions can cause adverse reactions. A computerized reminder system can enable TCM practitioners to reduce the risk of drug–herb interactions. In addition, health education for patients is crucial in avoiding adverse reaction by the interactions. PMID:25733840

PC version of PRIS (Power Reactor Information System)

International Nuclear Information System (INIS)

Fukala, J.; Stanik, Z.; White, D.

1990-05-01

The IAEA has been collecting operating experience data on nuclear power plants in the Member States since 1970. In 1980 a computerized database was established, the IAEA Power Reactor Information System (PRIS). To make PRIS data available to the Member States in a more convenient format, the development of a PC version of PRIS started in 1989

Process-Based Information Systems Development: Taking Advantage of a Component-Based Infrastructure

Directory of Open Access Journals (Sweden)

Pereira José Luís

2017-09-01

Full Text Available Background: Owing to the highly competitive business environment in which contemporary organizations have to operate, a quick and effective way of developing and maintaining information systems is of utmost importance to their success. Obviously, the computerized information systems that support the everyday operations and management of organizations play a critical role in their competitiveness. For that reason, nowadays, more than ever, information systems have to be quickly developed, rapidly reconfigured, and easily maintained.

ECAT: a new computerized tomographic imaging system for position-emitting radiopharmaceuticals

International Nuclear Information System (INIS)

Phelps, M.E.; Hoffman, E.J.; Huang, S.C.; Kuhl, D.E.

1977-01-01

The ECAT was designed and developed as a complete computerized positron radionuclide imaging system capable of providing high contrast, high resolution, quantitative images in 2 dimensional and tomographic formats. Flexibility, in its various image mode options, allows it to be used for a wide variety of imaging problems

Power Reactor Information System (PRIS)

International Nuclear Information System (INIS)

Spiegelberg, R.

1992-01-01

The IAEA has been collecting Operating Experience data for Nuclear Power Plants of the IAEA Member States since 1970. In order to facilitate an analysis of nuclear power plant performance as well as to produce relevant publications, all previously collected data supplied from the questionnaires were computerized in 1980 and the Power Reactor Information System was implemented. PRIS currently contains production records for the years up to and including 1990 and about 98% of the reactors-years operating experience in the world is contained in PRIS. (orig.)

Computerizing marine biota: a rational approach

Digital Repository Service at National Institute of Oceanography (India)

Chavan, V.S.; Chandramohan, D.; Parulekar, A.H.

Data on marine biota while being extensive are also patchy and scattered; thus making retrieval and dissemination of information time consuming. This emphasise the need for computerizing information on marine biota with the objective to collate...

A study on Requirements of Data Base Translator for APR1400 Computerized Procedure System at Shin-Hanul unit 1 and 2

International Nuclear Information System (INIS)

Seong, Nokyu; Lee, Sungjin

2015-01-01

The CPS is one of the Man Machine Interface (MMI) resources and the CPS can directly display plant graphic objects which are in the Digital Control System (DCS). And the CPS can send a request to DCS to provide DCS screen which is called step support display through DCS link button on a computerized procedure. The procedure writers can insert DCS graphic information to computerized procedure through data base which is provided by CPS Editing System (CPSES). The data base which is provided by CPSES conforms to the naming rule of DCS graphic objects. The naming rule of DCS graphic objects is defined by vendor thus status of DCS graphic objects which are in computerized procedure at Shin-Kori plant cannot be displayed on CPS at Shin-Hanul plant. To use computerized procedure which is written by other plant procedure writer, DCS graphic objects shall be translated by its plant data base. This paper introduces requirements of data base translator to reduce translation and re-inserting graphic objects burden. This paper introduces the requirements of data base translator of CPSES for APR1400 CPS at Shin-Hanul unit 1 and 2. The translator algorithms shall be tested to update data base of CPSES effectively. The prototype of translator is implemented and is being tested using real plant DB. This translator can be applied to Shin- Hanul unit1 and 2 through software V and V

A study on Requirements of Data Base Translator for APR1400 Computerized Procedure System at Shin-Hanul unit 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Seong, Nokyu; Lee, Sungjin [KHNP, Daejeon (Korea, Republic of)

2015-05-15

The CPS is one of the Man Machine Interface (MMI) resources and the CPS can directly display plant graphic objects which are in the Digital Control System (DCS). And the CPS can send a request to DCS to provide DCS screen which is called step support display through DCS link button on a computerized procedure. The procedure writers can insert DCS graphic information to computerized procedure through data base which is provided by CPS Editing System (CPSES). The data base which is provided by CPSES conforms to the naming rule of DCS graphic objects. The naming rule of DCS graphic objects is defined by vendor thus status of DCS graphic objects which are in computerized procedure at Shin-Kori plant cannot be displayed on CPS at Shin-Hanul plant. To use computerized procedure which is written by other plant procedure writer, DCS graphic objects shall be translated by its plant data base. This paper introduces requirements of data base translator to reduce translation and re-inserting graphic objects burden. This paper introduces the requirements of data base translator of CPSES for APR1400 CPS at Shin-Hanul unit 1 and 2. The translator algorithms shall be tested to update data base of CPSES effectively. The prototype of translator is implemented and is being tested using real plant DB. This translator can be applied to Shin- Hanul unit1 and 2 through software V and V.

Establishment of computerized support system for the assessment of radiation exposure in a nuclear emergency

Energy Technology Data Exchange (ETDEWEB)

Han, Moon Hui; Lee, Yeong Bok; Kim, Eun Han; Seo, Kyeong Seok; Hwang, Won Tae [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Kim, Byeong Woo [Sungkyunkwan Univ., Seoul (Korea, Republic of)

1994-12-15

For the development of a real-time dose assessment, the knowledge over several fields is necessary. For the establishment of the computerized support system for radiation dose assessment, the followings activities have been carried out in this first year. The first test operation of FADAS on HP workstation has been done by editing the basic modules which had been developed as a nuclear long-term project of Korea Atomic Energy Research Institute. The environmental information around the Kori site have been investigated and the information related to the emergency planning such as population density, road network, and socio-environmental data have been displayed on the computer screen. For the automatic control of the basic modules of FADAS, a first-step control program has been organized.

Computerized Italian criticality guide, description and validation

International Nuclear Information System (INIS)

Carotenuto, M.; Landeyro, P.A.

1988-10-01

Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

Computerized Italian criticality guide, description and validation

Energy Technology Data Exchange (ETDEWEB)

Carotenuto, M; Landeyro, P A [ENEA - Dipartimento Ciclo del Combustibile, Centro Ricerche Energia, Casaccia (Italy)

1988-10-15

Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

Ten years experience with a large computerized TLD-personnel monitoring system

International Nuclear Information System (INIS)

Duftschmid, K.E.

1986-01-01

It is now ten years since our Institute for Radiation Protection has fully replaced its filmdosimetry service by a computerized automated TLD system. Presently more than 13000 radiation workers are monthly monitored by three automated TLD readers linked to the computer center. The paper describes system hardware and software and experience gained in long-term routine operation. In particular the introduction of the new ICRU quantities for personnel dosimetry in the existing TLD system is discussed. (Author)

An Application of Geospatial Information Systems (GIS) Technology to Anatomic Dental Charting

OpenAIRE

Bartling, William C.; Schleyer, Titus K.L.

2003-01-01

Historically, an anatomic dental chart is a compilation of color-coded symbols and numbers used within a template, either paper or computerized, to create a graphic record of a patient’s oral health status. This poster depicts how Geospatial Information System (GIS) technology can be used to create an accurate, current anatomic dental chart that contains detailed information not present in current charting systems.

COST ANALYSIS OF ALTERNATIVE COMPUTERIZED SYSTEMS FOR THE MARKETING AND DISTRIBUTION OF MULTIPLE FOOD COMMODITIES

OpenAIRE

Epperson, James E.; Helmreich, D.P.; Moon, Leonard C.; Carley, Dale H.; Huang, Chung L.; Fletcher, Stanley M.

1981-01-01

The authors make cost comparisons among alternative computerized marketing systems. The systems described could encompass any number of commodities and stages of distribution involving cash and/or futures transactions.

Safety-technical comparison of a hard-wired dynamic reactor protection system with a computerized alternative. Pt. 2

International Nuclear Information System (INIS)

Buettner, W.E.

1978-03-01

The investigation presented here compares a conventional hard-wired dynamic reactor protection system with a computerized alternative. For both systems the spurious trip probability is determined, i.e. the probability of a false release of one or more protection actions due to failures. The mean unavailability is also determined for those not distinctly safety-oriented protection actions of the computerized protection system which are released via the open circuit current principle. This is because system breakdowns prevent the release of those protection actions in case of demand. The advantages and disadvantages of either type of system are viewed against each other. (orig.) [de

Evaluation of an ontology-based system for computerized cognitive rehabilitation.

Science.gov (United States)

Alloni, Anna; Quaglini, Silvana; Panzarasa, Silvia; Sinforiani, Elena; Bernini, Sara

2018-07-01

This paper describes the results of a randomized clinical trial about the effectiveness of a computerized rehabilitation treatment on a sample of 31 patients affected by Parkinson disease. Computerized exercises were administered by the therapists to the intervention group (n = 17) through the CoRe tool, which automatically generates a big variety of exercises leveraging on a stimuli set (words, sounds and images) organized into a dedicated ontology. A battery of standard neuropsychological tests was performed for patients' assessment at baseline, after the treatment (that lasted 1 month), and after 6 months from the treatment stop. The control group underwent a sham intervention. Results show a statistically significant clinical benefit from computerized rehabilitation with respect to sham treatment. For the intervention group, response time and response accuracy were integrated into a weighted score that accounts also for the specific cognitive burden of each exercise. Differently from the control group, the majority of patients in the intervention group showed an improvement in that score, more marked in the first week of treatment, and which lasts for the entire treatment period, which could account both for a quick learning effect and for an improvement of cognitive conditions. Good usability of CoRe, already observed in previous studies, was confirmed by the present trial, where the percentage of protocol completion in the intervention group is very high (all but one patient are above 90%). The CoRe system showed to be effective to improve some cognitive abilities in patients with Parkinson disease. However, after the end of the training, the benefit is hardly maintained over time. These findings support the implementation of CoRe in the clinical routine and the continuation of the treatment after discharge through the use of a homecare version of the system. Copyright © 2018 Elsevier B.V. All rights reserved.

New York State energy-analytic information system: first-stage implementation

Energy Technology Data Exchange (ETDEWEB)

Allentuck, J.; Carroll, O.; Fiore, L.

1979-09-01

So that energy policy by state government may be formulated within the constraints imposed by policy determined at the national level - yet reflect the diverse interests of its citizens - large quantities of data and sophisticated analytic capabilities are required. This report presents the design of an energy-information/analytic system for New York State, the data for a base year, 1976, and projections of these data. At the county level, 1976 energy-supply demand data and electric generating plant data are provided as well. Data-base management is based on System 2000. Three computerized models provide the system's basic analytic capacity. The Brookhaven Energy System Network Simulator provides an integrating framework while a price-response model and a weather sensitive energy demand model furnished a short-term energy response estimation capability. The operation of these computerized models is described. 62 references, 25 figures, 39 tables.

Effects of computerized clinical decision support systems on practitioner performance and patient outcomes: methods of a decision-maker-researcher partnership systematic review.

Science.gov (United States)

Haynes, R Brian; Wilczynski, Nancy L

2010-02-05

Computerized clinical decision support systems are information technology-based systems designed to improve clinical decision-making. As with any healthcare intervention with claims to improve process of care or patient outcomes, decision support systems should be rigorously evaluated before widespread dissemination into clinical practice. Engaging healthcare providers and managers in the review process may facilitate knowledge translation and uptake. The objective of this research was to form a partnership of healthcare providers, managers, and researchers to review randomized controlled trials assessing the effects of computerized decision support for six clinical application areas: primary preventive care, therapeutic drug monitoring and dosing, drug prescribing, chronic disease management, diagnostic test ordering and interpretation, and acute care management; and to identify study characteristics that predict benefit. The review was undertaken by the Health Information Research Unit, McMaster University, in partnership with Hamilton Health Sciences, the Hamilton, Niagara, Haldimand, and Brant Local Health Integration Network, and pertinent healthcare service teams. Following agreement on information needs and interests with decision-makers, our earlier systematic review was updated by searching Medline, EMBASE, EBM Review databases, and Inspec, and reviewing reference lists through 6 January 2010. Data extraction items were expanded according to input from decision-makers. Authors of primary studies were contacted to confirm data and to provide additional information. Eligible trials were organized according to clinical area of application. We included randomized controlled trials that evaluated the effect on practitioner performance or patient outcomes of patient care provided with a computerized clinical decision support system compared with patient care without such a system. Data will be summarized using descriptive summary measures, including proportions

Effects of computerized clinical decision support systems on practitioner performance and patient outcomes: Methods of a decision-maker-researcher partnership systematic review

Directory of Open Access Journals (Sweden)

Wilczynski Nancy L

2010-02-01

Full Text Available Abstract Background Computerized clinical decision support systems are information technology-based systems designed to improve clinical decision-making. As with any healthcare intervention with claims to improve process of care or patient outcomes, decision support systems should be rigorously evaluated before widespread dissemination into clinical practice. Engaging healthcare providers and managers in the review process may facilitate knowledge translation and uptake. The objective of this research was to form a partnership of healthcare providers, managers, and researchers to review randomized controlled trials assessing the effects of computerized decision support for six clinical application areas: primary preventive care, therapeutic drug monitoring and dosing, drug prescribing, chronic disease management, diagnostic test ordering and interpretation, and acute care management; and to identify study characteristics that predict benefit. Methods The review was undertaken by the Health Information Research Unit, McMaster University, in partnership with Hamilton Health Sciences, the Hamilton, Niagara, Haldimand, and Brant Local Health Integration Network, and pertinent healthcare service teams. Following agreement on information needs and interests with decision-makers, our earlier systematic review was updated by searching Medline, EMBASE, EBM Review databases, and Inspec, and reviewing reference lists through 6 January 2010. Data extraction items were expanded according to input from decision-makers. Authors of primary studies were contacted to confirm data and to provide additional information. Eligible trials were organized according to clinical area of application. We included randomized controlled trials that evaluated the effect on practitioner performance or patient outcomes of patient care provided with a computerized clinical decision support system compared with patient care without such a system. Results Data will be summarized

Development of BWR computerized operator support system for emergency conditions

International Nuclear Information System (INIS)

Murata, F.

1984-01-01

A BWR computerized operator support system (COSS) for emergency conditions has been under development for three years. The conceptual design of the system has been settled and some of the subsystems are in the detailed design or manufacturing stage. The principal functions are technical specification monitoring, diagnosis, guidance during emergency conditions, predictive simulation and safety monitoring. Before a reactor trip, alternative operational guidance for anomalous events is provided by utilization of the CTT (cause consequence tree) and FPS (failure propagation simulator). After the trip, operational guidance is based on event-oriented and symptom-oriented methods in association with the safety function monitor. The technical specification monitor controls the readiness monitor and performs surveillance tests of safety systems to maintain plant operational reliability and to ensure correct performance when initiated. The predictive simulator gives the future trends of significant plant parameters. These subsystems are expected to assist the operational personnel. The feasibility of the COSS functions is confirmed separately by off-line simulation. The paper considers the conceptual design, the functions of the subsystems and the off-line simulation results. Each subsystem has shown that useful information to operational personnel is provided. Henceforth these functions will be integrated into a single system and the feasibility will be thoroughly evaluated using a plant simulator which is being separately developed to verify the COSS. (author)

Status of sorption information retrieval system

International Nuclear Information System (INIS)

Hostetler, D.D.; Serne, R.J.; Brandstetter, A.

1979-09-01

A Sorption Information Retrieval System (SIRS) is being designed to provide an efficient, computerized, data base for information on radionuclide sorption in geologic media. The data bank will include Kd values for a large number of radionuclides occurring in radioactive wastes originating from the commercial nuclear power industry. Kd values determined to date span several groundwater compositions and a wide variety of rock types and minerals. The data system will not only include Kd values, but also background information on the experiments themselves. This will allow the potential user to retrieve not only the Kd values of interest but also sufficient information to evaluate the accuracy and usefulness of the data. During FY-1979, the logic structure of the system was designed, the software programmed, the data categories selected, and the data format specified. About 40% of the approximately 5000 Kd experiments performed by the Waste Isolation Safety Assessment Program (WISAP) and its subcontractors during FY-1977 and FY-1978 have been evaluated, coded and keypunched. Additional software improvements and system testing are needed before the system will be fully operational. A workshop requested by the NEA was held to discuss potential internatioal participation in the data system

A computerized system to monitor resilience indicators in organizations.

Science.gov (United States)

de Carvalho, Paulo Victor Rodrigues; de Souza, Alan Pinheiro; Gomes, Jose Orlando

2012-01-01

The concepts developed by resilience engineering allow the understanding and monitoring the functioning of organizations and, particularly, to map the role of human activities, in success or in failure, enabling a better comprehension about how people make decisions in unexpected situations. The capture of information about human activities in the various organization levels gives managers a deeper real-time understanding of what is influencing the people performance, providing awareness of the factors that influence positively or negatively the organizational goals initially projected. The monitoring is important because the correct functioning of complex systems depends on the knowledge that people have to perform their activities and how the system environment provides tools that actually support the human performance. Therefore, organizations should look forward through precursors in operating signals to identify possible problems or solutions in the structure of tasks and activities, safety, quality, schedule, rework, and maintenance. We apply the concepts of resilience engineering to understand the organization by the analysis of cognitive tasks and activities. The aim is the development of a computerized system to monitor human activities to produce indicators to access system resilience. The validation of the approach was made in a real organization and the results show the successful applicability of the system. Based on findings obtained after the experiment of the system in a real organization, and managers and workers opinions, it was possible to show that the use of system provided an anticipated (real-time) perception about how activities are effectively being performed, allowing managers and workers to make decisions more consistent with daily problems, and also to anticipate solutions to cope with unexpected situations.

The United States Department of Energy (DOE) Computerized Accident/Incident Reporting System (CAIRS)

International Nuclear Information System (INIS)

Briscoe, G.J.

1993-01-01

The Department of Energy's (DOE) Computerized Accident/Incident Reporting System (CAIRS) is a comprehensive data base containing more than 50,000 investigation reports of injury/illness, property damage and vehicle accident cases representing safety data from 1975 to the present for more than 150 DOE contractor organizations. A special feature is that the text of each accident report is translated using a controlled dictionary and rigid sentence structure called Factor Relationship and Sequence of Events (FRASE) that enhances the ability to retrieve specific types of information and to perform detailed analyses. DOE summary and individual contractor reports are prepared quarterly and annually. In addition, ''Safety Performance Profile'' reports for individual organizations are prepared to provide advance information to appraisal teams, and special topical reports are prepared for areas of concern such as an increase in the number of security injuries or environmental releases. The data base is open to all DOE and Contractor registered users with no access restrictions other than that required by the Privacy Act

A computerized system to measure interproximal alveolar bone levels in epidemiologic, radiographic investigations. I

International Nuclear Information System (INIS)

Wouters, F.R.; Jon-And, C.; Frithiof, L.; Soeder, P.Oe.; Lavstedt, S.

1988-01-01

The aims of the study were to adapt a computerized system to epidemiologic conditions, for rapid full-mouth measurements of alveolar bone levels from X5-magnified periapical radiographs and to analyze the variations in measurement due to different system components. Full-mouth measurements of interproximal alveolar bone height in percentage of root and tooth lengths were completed within av average time of 15 min. per set of radiographs. An analysis of variance showed that the examiner variation in measurement of a linear scale distance was 0.02 mm. The measurement accuracy was different for different distances. Each distance (d) measured with this system should therefore be calibrated with the equation Y = -0.007 - 0.014 (log 3d - 1.50) where Y is the estimate of measurement accuracy. The present computerized system enabled rapid recordings and demonstrated good measurement precision and accuracy. These are valuable features in epidemiologic investigations

Integration of computerized operation support systems on a nuclear power plant environment

Energy Technology Data Exchange (ETDEWEB)

Jaime, Guilherme D.G.; Almeida, Jose C.S.; Oliveira, Mauro V., E-mail: gdjaime@ien.gov.br, E-mail: jcsa@ien.gov.br, E-mail: mvitor@ien.gov.br [Instituto Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Servico de Sistemas Complexos. Divisao de Engenharia Nuclear

2015-07-01

Automation of certain tasks in a Nuclear Power Plant (NPP) control room is expected to result in reduced operators' mental workload, which may induce other benefits such as enhanced situation awareness and improved system performance. The final goal should be higher level of operational safety. Thus, recent works are increasingly assessing automation. The LABIHS compact NPP simulator, though, still operates under strictly manual printed hard-copy procedures, despite of the fact that the simulator incorporates several advancements in design of digitalized Human-Interfaces (HSIs). This work presents the development, implementation and integration of selected components to achieve increased level of computerized/automated operation of the LABIHS compact NPP simulator. Specifically, we discuss three components: (I) Automatic Plant Mode Detection, (II) Automatic Alarm Filtering, and (III) Computerized Procedures. Each one of these components has to be carefully designed/integrated so that one can avoid the undesired effects of some known implementations of automated systems on NPP, such as the reduction in the operator's system awareness, an increase in monitoring workload, and the degradation in manual skills, which could lead to automation-induced system failures. (author)

Integration of computerized operation support systems on a nuclear power plant environment

International Nuclear Information System (INIS)

Jaime, Guilherme D.G.; Almeida, Jose C.S.; Oliveira, Mauro V.

2015-01-01

Automation of certain tasks in a Nuclear Power Plant (NPP) control room is expected to result in reduced operators' mental workload, which may induce other benefits such as enhanced situation awareness and improved system performance. The final goal should be higher level of operational safety. Thus, recent works are increasingly assessing automation. The LABIHS compact NPP simulator, though, still operates under strictly manual printed hard-copy procedures, despite of the fact that the simulator incorporates several advancements in design of digitalized Human-Interfaces (HSIs). This work presents the development, implementation and integration of selected components to achieve increased level of computerized/automated operation of the LABIHS compact NPP simulator. Specifically, we discuss three components: (I) Automatic Plant Mode Detection, (II) Automatic Alarm Filtering, and (III) Computerized Procedures. Each one of these components has to be carefully designed/integrated so that one can avoid the undesired effects of some known implementations of automated systems on NPP, such as the reduction in the operator's system awareness, an increase in monitoring workload, and the degradation in manual skills, which could lead to automation-induced system failures. (author)

Aiming for a fully integrated computerized procedure system

International Nuclear Information System (INIS)

Marron, J. E.

2006-01-01

A fully integrated Computerized Procedure System must provide, at a minimum, a) Specification: access to design basis procedures, b) Monitoring: incorporation of real-time plant status, c) Advise: highlighting likely decision paths, and d) Reporting: logging conditions and actions taken. The CPS plays a critical role in overcoming the human factors that lead to accidents. At the same time it can be an essential tool in providing the information and automation to augment what humans do best, identify patterns and make associative leaps in the presence of ambiguous data. Timeliner and TaskGuide are examples of CPS that have evolved from projects in the aerospace industry. They illustrate certain common characteristics of a CPS, namely the knowledge base, user interface, and traceability features. The complexity and number of procedures for a current nuclear project has led to the development of two tools, the Power Generation Control System (PGCS) and the Online Procedure System (OLPS). Together, these systems address the knowledge-base and user interface aspects of a CPS and go a long way in addressing other areas. PGCS and OLPS contain full configuration management capabilities for procedures and the operating recipe. They include administrative functions for online and offline management of documents and data. Some lessons learned from this pair of programs developed by Invensys is the need for more integrated recording mechanisms. The future of CPS is likely to see higher integration of the document access, system status, decision support and logging capabilities. The CPS may evolve into the standard operational interface. Internet technologies that are common-place today have made the possibility of the Active Document a reality. The OPC Foundation is pursuing standards that may accelerate such developments. (authors)

A computer system for occupational radiation exposure information

International Nuclear Information System (INIS)

Hunt, H.W.

1984-01-01

A computerized occupational radiation exposure information system has been developed to maintain records for contractors at the U.S. Department of Energy's (DOE) Hanford Site. The system also allows indexing and retrieval of three million documents from microfilm, thus significantly reducing storage needs and costs. The users are linked by display terminals to the data base permitting them instant access to dosemetry and other radiation exposure information. Personnel dosemeter and bioassay results, radiation training, respirator fittings, skin contaminations and other radiation occurrence records are included in the data base. The system yields immediate analysis of radiological exposures for operating management and health physics personnel, thereby releasing personnel to use their time more effectively

Research on accounting transition from computerization to informationization

Directory of Open Access Journals (Sweden)

Shu Chen

2017-11-01

Full Text Available The application for computer technology, digitalization technology and network technology in the accounting field has promoted the development of accounting informationization. Accounting informationization is a product integrated with traditional accounting theory and modern information technology, which is an inevitable trend of continuous development of modern accounting. This paper discusses the basic concepts and characteristics of accounting computerization and informationization based on the normative research method and literature data method, analyzes the feasibility of accounting transition from computerization to informationization, and finally puts forward the specific approaches and ultimate goals of accounting transition from computerization to informationization.

Application of computerized procedure system for AP1000

International Nuclear Information System (INIS)

Wen Fang

2012-01-01

With the tendency of digitalisation in instrumentation and control system of nuclear power plants, AP1000, as well as other advanced PWRs, is provided with the technical basis for the application of CPS (computerized procedure system). This paper makes a brief introduction on CPS construction and function. CPS, as an advanced procedure system, does not only have the function of electronic indication for operation procedures, but also have the ability to monitor plant data, process the data and then present the status of the procedure steps to the reactor operator. In addition, advantages of CPS compared with paper-based procedures and comparison with digital operating system of one M310 plus advanced nuclear power plant are described. Moreover, based on current situation, this paper offers several suggestions on CPS localization for Sanmen AP1000 nuclear power project. Besides, the last part of this paper discusses problems we might meet during the process of CPS localization. (author)

An ergonomics study of computerized emergency operating procedures: Presentation style, task complexity, and training level

International Nuclear Information System (INIS)

Xu Song; Song Fei; Li Zhizhong; Zhao Qianyi; Luo Wei; He Xuhong; Salvendy, Gavriel

2008-01-01

Emergency operating procedures (EOPs) are widely used in nuclear power plants (NPPs). With the development of information technology, computerized EOPs are taking the place of paper-based ones. Unlike paper-based EOPs, the industrial practice of computerized EOPs is still quite limited. Ergonomics issues of computerized EOPs have not been studied adequately. This study focuses on the effects of EOP presentation style, task complexity, and training level on the performance of the operators in the execution of computerized EOPs. One simulated computerized EOP system was developed to present two EOPs, each with different task complexity levels, by two presentation styles (Style A: one- and two-dimensional flowcharts combination; Style B: two-dimensional flowchart and success logic tree combination). Forty subjects participated in the experiment of EOP execution using the simulated system. Statistical analysis of the experimental results indicates that: (1) complexity, presentation style, and training level all can significantly influence the error rate. High-complexity tasks and lack of sufficient training may lead to a higher error rate. Style B caused a significantly higher error rate than style A did in the skilled phase. So the designers of computerized procedures should take the presentation styles of EOPs into account. (2) Task complexity and training level can significantly influence operation time. No significant difference was found in operation time between the two presentation styles. (3) Training level can also significantly influence the subjective workload of EOPs operations. This implies that adequate training is very important for the performance of computerized EOPs even if emergency responses with computerized EOPs are much more simple and easy than that with paper-based EOPs

An ergonomics study of computerized emergency operating procedures: Presentation style, task complexity, and training level

Energy Technology Data Exchange (ETDEWEB)

Xu Song; Song Fei [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China); Li Zhizhong [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)], E-mail: zzli@tsinghua.edu.cn; Zhao Qianyi; Luo Wei [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China); He Xuhong [Scanpower Risk Management China Inc., Towercrest International Plaza, No. 3 Maizidian West Road, Chaoyang District, Beijing 100016 (China); Salvendy, Gavriel [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)

2008-10-15

Emergency operating procedures (EOPs) are widely used in nuclear power plants (NPPs). With the development of information technology, computerized EOPs are taking the place of paper-based ones. Unlike paper-based EOPs, the industrial practice of computerized EOPs is still quite limited. Ergonomics issues of computerized EOPs have not been studied adequately. This study focuses on the effects of EOP presentation style, task complexity, and training level on the performance of the operators in the execution of computerized EOPs. One simulated computerized EOP system was developed to present two EOPs, each with different task complexity levels, by two presentation styles (Style A: one- and two-dimensional flowcharts combination; Style B: two-dimensional flowchart and success logic tree combination). Forty subjects participated in the experiment of EOP execution using the simulated system. Statistical analysis of the experimental results indicates that: (1) complexity, presentation style, and training level all can significantly influence the error rate. High-complexity tasks and lack of sufficient training may lead to a higher error rate. Style B caused a significantly higher error rate than style A did in the skilled phase. So the designers of computerized procedures should take the presentation styles of EOPs into account. (2) Task complexity and training level can significantly influence operation time. No significant difference was found in operation time between the two presentation styles. (3) Training level can also significantly influence the subjective workload of EOPs operations. This implies that adequate training is very important for the performance of computerized EOPs even if emergency responses with computerized EOPs are much more simple and easy than that with paper-based EOPs.

Integrate offsites management with information systems

Energy Technology Data Exchange (ETDEWEB)

Valleur, M. (TECHNIP, Paris (France))

1993-11-01

Computerized offsites management systems in oil refineries offer a unique opportunity to integrate advanced technology into a coherent refinery information system that contributes to benefits-driven optimal operations: from long-term, multirefinery linear programming (LP) models to sequential control of transfer lineups in the tank farm. There are strong incentives to automate and optimize the offsites operations, and benefits can be quantified to justify properly sized projects. The paper discusses the following: business opportunities, oil movement and advanced technology, project scoping and sizing, review of functional requirements, transfer automation, blending optimal control, on-line analyzers, oil movement and scheduling, organizational issues, and investment and benefits analysis.

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR)

International Nuclear Information System (INIS)

Gilbert, B.G.; Reece, W.J.; Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.

1990-12-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal computer. NUCLARR can furnish the end user with data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume 5: Data Manual provides a hard-copy representation of all data and related information available within the NUCLARR system software. This document is organized in three sections. Part 1 is the summary description, which presents an overview of the NUCLARR system and data processing procedures. Part 2 contains all data and information relevant to the human error probability (HEP) data side of NUCLARR. Data and information for the hardware component failure data (HCFD) side are presented in Part 3. 7 refs

The use of inverse systems in computerized operator support systems for load-following control

International Nuclear Information System (INIS)

Klebau, J.; Hentschel, B.; Ziegenbein, D.

1987-01-01

The basic problem in load-following control of nuclear power reactors consists in calculation of control rod movement to realize desired local power density distribution in the reactor. Well-known solutions are based on optimal control theory. The paper describes the concept of systems inverses which makes it possible to solve the load-following control problem not in an optimal but in an 'ideal' way, vanishing the optimization criterion of the classical approaches. The advantages of inverse systems are simple calculation procedures, low on-line-storage capacity and low on-line computational amount. This makes it attractive to use inverse systems in computerized operator support systems. 19 refs. (author)

Work improvement by computerizing the process of shielding block production

International Nuclear Information System (INIS)

Kang, Dong Hyuk; Jeong, Do Hyeong; Kang, Dong Yoon; Jeon, Young Gung; Hwang, Jae Woong

2013-01-01

Introducing CR (Computed Radiography) system created a process of printing therapy irradiation images and converting the degree of enlargement. This is to increase job efficiency and contribute to work improvement using a computerized method with home grown software to simplify this process, work efficiency. Microsoft EXCEL (ver. 2007) and VISUAL BASIC (ver. 6.0) have been used to make the software. A window for each shield block was designed to enter patients' treatment information. Distances on the digital images were measured, the measured data were entered to the Excel program to calculate the degree of enlargement, and printouts were produced to manufacture shield blocks. By computerizing the existing method with this program, the degree of enlargement can easily be calculated and patients' treatment information can be entered into the printouts by using macro function. As a result, errors in calculation which may occur during the process of production or errors that the treatment information may be delivered wrongly can be reduced. In addition, with the simplification of the conversion process of the degree of enlargement, no copy machine was needed, which resulted in the reduction of use of paper. Works have been improved by computerizing the process of block production and applying it to practice which would simplify the existing method. This software can apply to and improve the actual conditions of each hospital in various ways using various features of EXCEL and VISUAL BASIC which has already been proven and used widely

Work improvement by computerizing the process of shielding block production

Energy Technology Data Exchange (ETDEWEB)

Kang, Dong Hyuk; Jeong, Do Hyeong; Kang, Dong Yoon; Jeon, Young Gung; Hwang, Jae Woong [Proton Therapy Center, National Cancer Center, Goyang (Korea, Republic of)

2013-09-15

Introducing CR (Computed Radiography) system created a process of printing therapy irradiation images and converting the degree of enlargement. This is to increase job efficiency and contribute to work improvement using a computerized method with home grown software to simplify this process, work efficiency. Microsoft EXCEL (ver. 2007) and VISUAL BASIC (ver. 6.0) have been used to make the software. A window for each shield block was designed to enter patients' treatment information. Distances on the digital images were measured, the measured data were entered to the Excel program to calculate the degree of enlargement, and printouts were produced to manufacture shield blocks. By computerizing the existing method with this program, the degree of enlargement can easily be calculated and patients' treatment information can be entered into the printouts by using macro function. As a result, errors in calculation which may occur during the process of production or errors that the treatment information may be delivered wrongly can be reduced. In addition, with the simplification of the conversion process of the degree of enlargement, no copy machine was needed, which resulted in the reduction of use of paper. Works have been improved by computerizing the process of block production and applying it to practice which would simplify the existing method. This software can apply to and improve the actual conditions of each hospital in various ways using various features of EXCEL and VISUAL BASIC which has already been proven and used widely.

Test and evaluation of computerized nuclear material accounting methods. Final report

International Nuclear Information System (INIS)

1995-01-01

In accordance with the definition of a Material Balance Area (MBA) as a well-defined geographical area involving an Integral operation, the building housing the BFS-1 and BFS-1 critical facilities is considered to consist of one MBA. The BFS materials are in the form of small disks clad in stainless steel and each disk with nuclear material has its own serial number. Fissile material disks in the BFS MBA can be located at three key monitoring points: BFS-1 facility, BFS-2 facility and main storage of BFS fissile materials (storage 1). When used in the BFS-1 or BFS-2 critical facilities, the fissile material disks are loaded in tubes (fuel rods) forming critical assembly cores. The following specific features of the BFS MBA should be taken into account for the purpose of computerized accounting of nuclear material: (1) very large number of nuclear material items (about 70,000 fissile material items); and (2) periodically very intensive shuffling of nuclear material items. Requirements for the computerized system are determined by basic objectives of nuclear material accounting: (1) providing accurate information on the identity and location of all items in the BFS material balance area; (2) providing accurate information on location and identity of tamper-indicating devices; (3) tracking nuclear material inventories; (4) issuing periodic reports; (5) assisting with the detection of material gains or losses; (6) providing a history of nuclear material transactions; (7) preventing unauthorized access to the system and data falsification. In August 1995, the prototype computerized accounting system was installed on the BFS facility for trial operation. Information on two nuclear material types was entered into the data base: weapon-grade plutonium metal and 36% enriched uranium dioxide. The total number of the weapon-grade plutonium disks is 12,690 and the total number of the uranium dioxide disks is 1,700

A prototype of a computerized patient record.

Science.gov (United States)

Adelhard, K; Eckel, R; Hölzel, D; Tretter, W

1995-01-01

Computerized medical record systems (CPRS) should present user and problem oriented views of the patient file. Problem lists, clinical course, medication profiles and results of examinations have to be recorded in a computerized patient record. Patient review screens should give a synopsis of the patient data to inform whenever the patient record is opened. Several different types of data have to be stored in a patient record. Qualitative and quantitative measurements, narratives and images are such examples. Therefore, a CPR must also be able to handle these different data types. New methods and concepts appear frequently in medicine. Thus a CPRS must be flexible enough to cope with coming demands. We developed a prototype of a computer based patient record with a graphical user interface on a SUN workstation. The basis of the system are a dynamic data dictionary, an interpreter language and a large set of basic functions. This approach gives optimal flexibility to the system. A lot of different data types are already supported. Extensions are easily possible. There is also almost no limit concerning the number of medical concepts that can be handled by our prototype. Several applications were built on this platform. Some of them are presented to exemplify the patient and problem oriented handling of the CPR.

Computerization of atomic level and transition data for the first and second ionization states of the elements hydrogen through phosphorous

International Nuclear Information System (INIS)

Henry, E.A.

1976-01-01

A computerized data base of atomic energy levels and atomic transition data has been developed from data published by the National Bureau of Standards. These data are of potential use for laser application. The MASTER CONTROL data-base management system is used. These computerized data can be requested from the ERDA Computer Program Exchange and Information Center of the Argonne National Laboratory or from the National Technical Information Service of the U.S. Department of Commerce

Development of Nuclear Control and Management Information Treatment System

Energy Technology Data Exchange (ETDEWEB)

Yoo, J. G.; Lee, B. D.; So, D. S. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2007-07-01

To implement obligations under the Non-Proliferation Treaty (NPT) and the bilateral agreements more effectively, we proposed a computerized system named the Nuclear Control and Management Information Treatment System (NCAMITS) as a part of the Nuclear Transparency Enhancement Project at the Korea Atomic Energy Research Institute (KAERI). The database system is designed not only to undertake the facility-level accounting for and control of nuclear material at KAERI, but also to meet the requirements of the State (National) System of Accounting and Control (SSAC). Since the NCAMITS will provide services for the facility operators as well as the safeguard information managers at KAERI, the development of the system is supposed to accommodate the end-user's convenience and the manager's sophisticated specifications as well.

Improvements on computerized procedure system of advanced power reactor 1400 MWe

International Nuclear Information System (INIS)

Seong, Nokyu; Jung, Yeonsub; Sung, Chanho; Kang, Sungkon

2017-01-01

Plant procedures are instructions to help operator in monitoring, decision making, and controlling Nuclear Power Plants (NPPs). While plant procedures conventionally have been paper-based, computerized-based procedures are being implemented to reduce the drawbacks of paper-based procedures in many nuclear power plants. The Computerized Procedure System (CPS) designed by Korea Hydro and Nuclear Power Central Research Institute (KHNP CRI) is one of the human-system interfaces (HSIs) in digitalized Main Control Room (MCR) of APR1400 (Advanced Power Reactor 1400 MWe). Currently, CPS is being applied to constructing nuclear power plants of Korea and Barakah NPP 1, 2, 3 and 4 units of United Arab Emirates. The CPS has many advantages to perform the procedure in fully digitalized MCR. First, CPS provides the procedure flow with logic diagram to operators. The operator easily can be aware of the procedure flow from a previous instruction to the next instruction and also can find out the relation between parent instruction and child instructions such as AND, OR and SEQUENCE logics. Second, CPS has three logic-based functions such as procedure entry condition monitoring logic, continuously applied step (CAS) re-execution monitoring logic and auto evaluation logic on instructions. E.g. CPS provides the standard post trip actions procedure open popup message when the reactor trips by calculating the entry condition logic that procedure writer had made in the writing process. Third, CPS can directly display the task information related to instructions such as valves, pumps, process parameters, etc. and also the operator can call the system display related to procedure execution. If an operator clicks the system display link, the related system display popups on the right side monitor of CPS display. Lastly, CPS supports the synchronization of procedure among the operators. This synchronization function helps operators to succeed the goal of procedure and improve the situation

Computerized training program usage at the Fort Calhoun Nuclear Power Station

International Nuclear Information System (INIS)

Ruzic, D.H.; Reed, W.H.; Lawton, R.K.; Fluehr, J.J.

1987-01-01

The increased US Nuclear Regulatory Commission and Institute of Nuclear Power Operations (INPO) interest in the nuclear power industry training programs resulted in the Omaha Public Power District staff at the Fort Calhoun Nuclear Power Station investigating the potential for computerizing their recently accredited training records, student training requirements, and the process of determining student certification status. Additional areas that were desirable were a computerized question data bank with random test generation, maintaining history of question usage, and tracking of the job task analysis process and course objectives. SCI Software's online personnel training information management system (OPTIM) was selected, subsequent to a bid evaluation, to provide these features while operating on the existing corporate IBM mainframe

Computerized aids and human factors in nuclear power plant operation

International Nuclear Information System (INIS)

Bastl, W.

1988-01-01

When guiding a complex process and associated intermeshed systems in a nuclear power plant, a primary issue consists of the call for excellent information. Technically speaking, today's centralized control rooms are at the end of a development phase which has been governed by the introduction of remote information and remote control systems. But by centralization, an information overload problem arose, and it has been solved by dividing panels according to systems, operational phases and specific tasks. In addition, the overview and relationship of systems have been visualized by mimic diagrams. It is attempted to make transparent the technical back-ground of the processes and systems to be controlled, thus to provide the necessary basis for understanding the problems of operators. Practical examples are used for the purpose. The information dilemma, the systems for high level information, automation and information, plant safety and information, and the problem of where to go from here are described. Computerized operator aids must be discussed along assistance in information and assistance in automatic control. (Kako, I.)

Neurosurgical operating computerized tomographic scanner system

International Nuclear Information System (INIS)

Okudera, Hiroshi; Sugita, Kenichiro; Kobayashi, Shigeaki; Kimishima, Sakae; Yoshida, Hisashi.

1988-01-01

A neurosurgical operating computerized tomography scanner system is presented. This system has been developed for obtaining intra- and postoperative CT images in the operating room. A TCT-300 scanner (manufactured by the Toshiba Co., Tokyo) is placed in the operating room. The realization of a true intraoperative CT image requires certain improvements in the CT scanner and operating table. To adjust the axis of the co-ordinates of the motor system of the MST-7000 microsurgical operating table (manufactured by the Mizuho Ika Co., Tokyo) to the CT scanner, we have designed an interface and a precise motor system so that the computer of the CT scanner can directly control the movement of the operating table. Furthermore, a new head-fixation system has been designed for producing artifact-free intraoperative CT images. The head-pins of the head-fixation system are made of carbon-fiber bars and titanium tips. A simulation study of the total system in the operating room with the CT scanner, operating table, and head holder using a skull model yielded a degree of error similar to that in the phantom testing of the original scanner. Three patients underwent resection of a glial tumor using this system. Intraoperative CT scans taken after dural opening showed a bulging of the cortex, a shift in the central structure, and a displacement of the cortical subarachnoid spaces under the influence of gravity. With a contrast medium the edge of the surrounding brain after resection was enhanced and the residual tumor mass was demonstrated clearly. This system makes it possible to obtain a noninvasive intraoperative image in a situation where structural shifts are taking place. (author)

Staduim Management Information System. A Casestudy Of Dan Anyiam Stadium Owerri Nigeria

Directory of Open Access Journals (Sweden)

Amanze B.C

2015-08-01

Full Text Available ABSTRACT This paper was centered on computerized stadium information management system. It is worthy to note that the current process of information management is being operated manually and due to this procedure numerous problems are encountered especially in the management of the crowd and ticket processing. The motivation of the software is to eliminate the manual procedures in the stadium and proper auditing is carried out in ensuring that those selling the tickets are authorized personal. The objective of the system is to successfully implement the computerized procedure and to overcome the obstacle that would hinder the successful implementation of the system. Research methodology practical and objective research techniques was used to outlines the way in which research was undertaken and among other things. The new system which is the expected data provides management software and advisory services to the sports and entertainment sector the new system was designed using Microsoft visual studio 2010 Ultimate as the front end and Microsoft SQL server as the back end. This language was chosen because it is easy to read and understand. It is real time and user friendly.

Computerized database management system for breast cancer patients.

Science.gov (United States)

Sim, Kok Swee; Chong, Sze Siang; Tso, Chih Ping; Nia, Mohsen Esmaeili; Chong, Aun Kee; Abbas, Siti Fathimah

2014-01-01

Data analysis based on breast cancer risk factors such as age, race, breastfeeding, hormone replacement therapy, family history, and obesity was conducted on breast cancer patients using a new enhanced computerized database management system. My Structural Query Language (MySQL) is selected as the application for database management system to store the patient data collected from hospitals in Malaysia. An automatic calculation tool is embedded in this system to assist the data analysis. The results are plotted automatically and a user-friendly graphical user interface is developed that can control the MySQL database. Case studies show breast cancer incidence rate is highest among Malay women, followed by Chinese and Indian. The peak age for breast cancer incidence is from 50 to 59 years old. Results suggest that the chance of developing breast cancer is increased in older women, and reduced with breastfeeding practice. The weight status might affect the breast cancer risk differently. Additional studies are needed to confirm these findings.

A design methodology for materials control and accounting information systems

International Nuclear Information System (INIS)

Helman, P.; Strittmatter, R.B.

1987-01-01

Modern approaches to nuclear materials safeguards have significantly increased the data processing needs of safeguards information systems. Implementing these approaches will require developing efficient, cost-effective designs. Guided by database design research, we are developing a design methodology for distributed materials control and accounting (MCandA) information systems. The methodology considers four design parameters: network topology, allocation of data to nodes, high-level global processing strategy, and local file structures to optimize system performance. Characteristics of system performance that are optimized are response time for an operation, timeliness of data, validity of data, and reliability. The ultimate goal of the research is to develop a comprehensive computerized design tool specifically tailored to the design of MCandA systems

Developing a computerized aging management system for concrete structures in finnish nuclear power plants

International Nuclear Information System (INIS)

Al-Neshawy, F.; Piironen, J.; Sistonen, E.; Vesikari, E.; Tuomisto, M.; Hradil, P.; Ferreira, M.

2013-01-01

Finland has four nuclear reactors units in two power plants. The first unit started operation in 1977 and in the early 1980's all four units were in use. During the last few years the aging management of the Nuclear Power Plant's (NPP) concrete structures has grown an important issue because the existing structures are reaching the end of their licensed operating lifetime (about 40 years). Therefore the nuclear power companies are developing aging management systems to avoid premature degradation of NPP facilities and to be able to extend their operating lifetime. This paper is about the development of a computerized ageing management system for the nuclear power plants concrete structures. The computerized ageing management system is built upon central database and implementation applications. It will assist the personnel of power companies to implement the aging management activities at different phases of the lifetime of a power plant. It will provide systematic methods for planning, surveillance, inspection, monitoring, condition assessment, maintenance and repair of structures. (authors)

The computerized system of meteorology data process for nuclear power plant

International Nuclear Information System (INIS)

Yan Jun; Dai Zhongde; Huang Haitao; Zhang Yiqing; Gu Zhijie

1994-06-01

Based on some specifications of the second-stage of the Qinshan Nuclear Power Plant and combined with advantages of STD-BUS, the computerized acquisition system with 7 kinds of meteorology data was developed. The system was put into operation in Nov. 1991, and acquisition rate reached 90% in one year. The system consists of two sub-systems, 7 kinds of meteorology sensors and their interface. Rain and sun radiation quantities are transmitted by means of V/F conversion. In order to enhance the system reliability all sensors are calibrated, the industrial control computer with STD-BUS is applied. The system has keyboard, micro-printer and LED display with block construction and has good resistance to interference

A production system for computerized emergency procedures tracking

International Nuclear Information System (INIS)

Petrick, W.; Ng, K.; Stuart, C.; Cain, D.

1988-01-01

This paper describes a methodology used to implement a computerized Emergency Operating Procedures (EOP) tracking system based on artificial intelligence (AI) technologies. In AI parlance, the system is a production system in which the knowledge representation is a set of productions (IF-THEN rules) which are interpreted by an inference engine or rule interpreter. The inference engine looks for pattern matches in the rule premises which lead to a conclusion. This inferred conclusion is subsequently used in further pattern matches. By separating the knowledge representation from the inference engine, the system can readily accommodate changes to the written procedures. The system is written in the C language and is co-resident on the same computer as the Safety Parameter Display System (SPDS). The plant EOPs have been written in about 250 rules which are evaluated in less than one second using about 10-20% of the CPU. The conclusions are available to multiple users within seconds after a parameter value changes. The benefits achieved with this production rule system include compatibility with the written procedures used as the knowledge source, compatibility with control room instrumentation, compatibility with the SPDS, realtime performance, and efficient computer usage

Review of trends in computerized systems for operator support

International Nuclear Information System (INIS)

Cain, D.G.

1985-01-01

The major trends shaping the development of computerized operator support systems in nuclear power plants are reviewed. These trends are the result of prior research in disturbance analysis systems that provided the technology base, and the SPDS requirement, which has been the impetus for change. The process is expected to result in hybrid control rooms with computer-driven supervisory workstations that complement conventional control board lay-outs. In the next three to five year period substantial upgrading of computer hardware will allow new and more sophisticated applications routines to be developed for operator support. Greater attention is being given to on-line validation of input signals for computer applications. A general movement towards operating strategies that are not based upon pre-analyzed event sequences is expected to influence the development of operator aids. The integration of displays with operating procedures will enable the computer system to a better coupling between problem detection and its resolution. Improved design methodology will assure that computer applications are accepted and used by operations personnel. Greater on-line analysis capability is stimulating the trend towards more on-site analysis and decision-making at nuclear power plants. Software standardization reflects the high cost of software development and the desire by utilities to gain greater independence from suppliers. There is growing realization that control rooms are beset by many of the demands and limitations of other office settings and that some of these may be addressed by the burgeoning office automation technology. Trends beyond the next five years are difficult to predict; however, there will be a trend towards more intelligent software. Artificial intelligence technology may play a pivotal role in future applications. Taking these trends into perspective, the author concludes that a promising future exists for computerized operator support in nuclear

How to Maintain Computerized Procedure System in the same Version

International Nuclear Information System (INIS)

Jung, Yeon Sub

2016-01-01

CPS(Computerized Procedure System) has been introduced in advanced nuclear power plant worldwide. Korean CPS complies with this trend. It has been applied to Shinkori3,4 and all their successors including BNPP1,2,3,4. CPS is designed by KHNP CRI, and developed by Westinghouse or Doosan. Initial design has been improved by reflecting operator experience, human factor V and V, and advanced engineering method. Design improvement makes CPS differ from plant to plant. For example CPS in Shinhanul cannot interpret CP(Computerized Procedure) of ShinKori3, 4. Different CPS makes it difficult to utilize CP and train operators. Therefore it is important to keep CPS in single version. Note that typical text editors in the office are kept in single version. On the other hand, plant monitoring systems in main control room are actually different. Because CPS is positioned between text editor and monitoring system, goal to maintain CPS in single version is not an easy task. From Shinkori3,4, lots of improvements are achieved in CPS. This improvement surely makes operation easy and will not introduce human errors. Side effect of improvement is that PXS and CPS ES may not be compatible among nuclear power plants. So the side effect should be avoided by minimizing change of XML. Initial XML had been developed for Shinkori3,4. The XML has been modified slightly for Shinhanul1,2. PXS and CPS ES are being developed for the same version for all nuclear power plants of APR1400

Information system design of inventory control spare parts maintenance (valuation class 5000) (case study: plant kw)

Science.gov (United States)

Fitriana, Rina; Moengin, Parwadi; Riana, Mega

2016-02-01

Plat KW hadn't using optimal inventory level planning yet and hadn't have an information system that well computerized. The research objective is to be able to design an information system related inventory control of spare parts maintenance. The study focused on five types of spare parts with the highest application rate during February 2013- March 2015 and included in the classification of fast on FSN analysis Grinding stones Cut 4". Cable Tie 15". Welding RB 26-32MM. Ring Plat ½" and Ring Plate 5/8 ". Inventory calculation used Economic Order Quantity (EOQ). Safety Stock (SS) and Reorder Point (ROP) methods. System analysis conducted using the framework PIECES with the proposed inventory control system. the performance of the plant KW relating to the supply of spare parts maintenance needs can be more efficient as well as problems at the company can be answered and can perform inventory cost savings amounting Rp.267.066. A computerized information system of inventory control spare parts maintenance provides a menu that can be accessed by each departments as the user needed.

A Management Information System Model for Program Management. Ph.D. Thesis - Oklahoma State Univ.; [Computerized Systems Analysis

Science.gov (United States)

Shipman, D. L.

1972-01-01

The development of a model to simulate the information system of a program management type of organization is reported. The model statistically determines the following parameters: type of messages, destinations, delivery durations, type processing, processing durations, communication channels, outgoing messages, and priorites. The total management information system of the program management organization is considered, including formal and informal information flows and both facilities and equipment. The model is written in General Purpose System Simulation 2 computer programming language for use on the Univac 1108, Executive 8 computer. The model is simulated on a daily basis and collects queue and resource utilization statistics for each decision point. The statistics are then used by management to evaluate proposed resource allocations, to evaluate proposed changes to the system, and to identify potential problem areas. The model employs both empirical and theoretical distributions which are adjusted to simulate the information flow being studied.

A Review of the Factors Associated with the Adoption of Accounting Information Systems in Gulf Countries.

Science.gov (United States)

Hammour, Hadal; Househ, Mowafa; Razzak, Hira Abdul

2017-01-01

This review attempts to elucidate the significance of accounting information systems within healthcare settings in the Gulf regions. Information and communication technologies (ICT) has provided accounting system the ability to help an organization use and develop computerized systems to record and track financial transactions. Accounting information systems, if well implemented, can permit healthcare sectors in the Gulf regions to produce reports that can support the decision making process. Additional abilities of an accounting information systems include faster processing, enriched accuracy, amplified functionality, and improved external reporting. Training of hospital staff can help in enhancing the use of accounting information systems in gulf hospitals.

Experience feedback of computerized controlled nuclear power plants

International Nuclear Information System (INIS)

Poizat, F.

2004-01-01

The N4 step of French PWR-type nuclear power plants is characterized by an instrumentation and control system entirely computerized (operation procedures including normal and accidental operation). Four power plants of this type (Chooz and Civaux sites) of 1450 MWe each were connected to the power grid between August 1996 and December 1999. The achievement of this program make it possible and necessary to carry out an experience feedback about the development, successes and difficulties encountered in order to draw out some lessons for future realizations. This is the aim of this article: 1 - usefulness and difficulties of such an experience feedback: evolution of instrumentation and control systems, necessary cautions; 2 - a successful computerized control: checking of systems operation, advantages, expectations; 3 - efficiency of computerized systems: demonstration of operation safety, profitability; 4 - conclusions and interrogations: system approach instead of 'micro-software' approach, commercial or 'made to measure' products, contract agreement with a supplier, when and how upgrading. (J.S.)

Computerized commodity management system in Thailand and Brazil.

Science.gov (United States)

1984-01-01

Thailand's National Family Planning Program is testing a computerized contraceptive commodity reporting management in 4 provinces with 104 National Family Planning Program (NFPP) reporting entities. Staff in the Brazilian Association of Family Planning Entities (ABEPF) and CPAIMC, a major family planning service agency, have been trained in the use of a computerized commodity distribution management system and are ready to initiate test use. The systems were designed in response to specific commodity management needs of the concerned organizations. Neither distribution program functions as a contraceptive social marketing (CSM) program, but each system reviewed has aspects that are relevant to CSM commodity management needs. Both the Thai and Brazilian systems were designed to be as automatic and user friendly as possible. Both have 3 main databases and perform similar management and reporting functions. Differing program configurations and basic data forms reflect the specific purposes of each system. Databases for the logistics monitoring system in Thailand arethe reporting entity (or ID) file; the current month's data file; and the master balance file. The data source is the basic reporting form that also serves as a Request and Issue Voucher for commodities. Editing functions in the program check to see that the current "beginning balance" equals the previous month's ending balance. Indexing functions in the system allow direct access to the records of any reporting entity via the ID number, as well as the sequential processing of records by ID number. 6 reports can be generated: status report by issuing entity; status report by dispensing entity; aggregate status report; out of compliance products report; out of compliance outlets report; and suggested shipment to regional warehouse report. Databases for the distribution management system in Brazil are: the name-ID (client institution) file; the product file; and the data file. The data source is an order form

Productivity results of nuclear information systems

International Nuclear Information System (INIS)

Groves, J.E.

1988-01-01

The information necessary to manage a nuclear generation station and multiple stations is greater today than ever before. The management of the processes necessary to develop information from data requires professional management and a programmatic approach. The cost is not insignificant. But the cost of not facing this challenge squarely is greater. The San Onofre Nuclear Generation Plant has developed the Nuclear Information Services function to assist management and professionals at all levels with their information needs. Often, this is merely giving them the tools they need to do it themselves. Herein contains a selection of specific examples that urges officer and senior level management to review the concept of the Nuclear Information Services function in more depth to determine the appropriateness of such an approach within their organizations. The establishment of on line computerized systems for the majority of the work flow processes and administrative process has resulted in an estimate 190 less people needed. The Health Physics Automated Access Control System (AACS) implementation resulted in a savings of $800,000 a year. The implementation of a Site Procedures Information Network (SPIN) has saved $160,000 per year

Man-mashine communication improvements in computerized operator support system by new technologies

International Nuclear Information System (INIS)

Tai, I.; Seki, E.; Fukumoto, A.; Mori, N.; Tsuchida, M.; Itoh, J.; Tanaka, K.

1984-01-01

Improvement of the man-machine interface performance is under way as Computerized Operator Support System for nuclear power plants in Japan. This paper describes several improved points in the design of man-mashine interface, especially on the console, based on the evaluation of the conventional design and by taking into account the performance test results of new man-machine interfacing tools. (author)

X-ray computerized tomography based on the method of reciprocal projection with filtration by double differentiation. Procedure and information peculiarities

International Nuclear Information System (INIS)

Vajnberg, Eh.I.; Kazak, I.A.; Fajngojz, M.L.

1985-01-01

The results of experimental evaluation of procedure and information peculiarities of the method of reciprocal projection with filtration of projections by double differentiation (RPFDD) for the monitoring of industrial products are generalized. Succession of stages n the RPFDD method permits to separately optimize reconstruction of high-frequeny and low-frequency tomogram structure which sharply reduces the acuteness of contradictions of conventional scheme between the required increase of accuracy and intolerable growth of computerized charges. High accuracy of evaluation of the linear attenuation factor of low-frequency structures in a wide range of densities at the last stage of RPFDD scheme is attained despite the non-conventionally small range of values at earlier stages of computerized processing

Feasibility of computerized screening for intimate partner violence in a pediatric emergency department.

Science.gov (United States)

Scribano, Philip V; Stevens, Jack; Marshall, Jessica; Gleason, Erica; Kelleher, Kelly J

2011-08-01

This study aimed to evaluate the feasibility of caregiver-initiated computerized screening in a pediatric emergency department (ED) to identify home safety risks, with a specific emphasis on intimate partner violence (IPV). Home safety screening kiosks were developed using information technology as the first step in a plan to decrease family violence. Caregivers self-initiated a standard-of-care screening process that included both non-IPV and IPV items. An ED social worker received an automated text page and printed summary of the findings when a caregiver endorsed IPV. System activity was tracked by comparing frequency of completed screens to the daily ED census and by determining the percentage of completed screens that were positive for IPV. The reliability of the technology was evaluated as percentage of days of system downtime. Meetings with ED personnel and direct observations of families were conducted to identify potential barriers and successes to the technology utilization. During a 15-month period, 13,057 computerized screens occurred, with a 4-fold increase in the computerized screening rate after ED triage nurses became champions of these efforts. Fourteen percent of the computerized screens were positive for IPV. The reliability of the technology was considered quite high, with rare system downtime (4.2% of days) reported during the 15 months. There were several themes identified by caregivers and providers regarding barriers to successful use of the safety screening. A reliable, caregiver-initiated system is possible to offer consistent opportunity to conduct unobtrusive, private screening for IPV and other home safety concerns.

Experience feedback learned from commissioning and operation of the fully computerized I and C system of the French N4 series

International Nuclear Information System (INIS)

Maillart, H.

1999-01-01

The I and C system of new N4 series of French Nuclear Power Plant, has a fully computerized multilevel architecture from process to technical management. This I and C system includes a computerized control room, which allows seated operation from compact computerized workstations in the control room in the full range of operation situations. This architecture makes a deep use of diversification and redundancy at each level. A CAD tool ensures management, quality and consistency of the data in the different systems of the architecture. Major companies have participated in this project : FRAMATOME together with SCHNEIDER ELECTRIC (Reactor Protection and Control Systems Vendor) and SEMA GROUP together with BAILEY-SEREG HARTMANN and BRAUN (General Automation and Central Data Processing Systems Vendor). The assessment of project performance and the first months of operation of the N4 I and C system that can be established as of now is completely positive: firstly, it confirms the ability of a fully computerized I and C system to meet the reliability, dependability and operation constraints necessary for the control of a nuclear plant unit, secondly, it confirms the validity of the technical choices made by EDF and its suppliers, lastly, this period of operation allows the validation of the choices made for the organization and architecture of the CAD chain upstream of the system. (author)

Unleashing the Effectiveness of Process-oriented Information Systems: Problem Analysis, Critical Success Factors, Implications

NARCIS (Netherlands)

Mutschler, B.B.; Reichert, M.U.; Bumiller, J.

2008-01-01

Process-oriented information systems (IS) aim at the computerized support of business processes. So far, contemporary IS have often fail to meet this goal. To better understand this drawback, to systematically identify its rationales, and to derive critical success factors for business process

Acceptance and implementation of a system of planning computerized based on Monte Carlo

International Nuclear Information System (INIS)

Lopez-Tarjuelo, J.; Garcia-Molla, R.; Suan-Senabre, X. J.; Quiros-Higueras, J. Q.; Santos-Serra, A.; Marco-Blancas, N.; Calzada-Feliu, S.

2013-01-01

It has been done the acceptance for use clinical Monaco computerized planning system, based on an on a virtual model of the energy yield of the head of the linear electron Accelerator and that performs the calculation of the dose with an algorithm of x-rays (XVMC) based on Monte Carlo algorithm. (Author)

A computerized assessment and response system for radiological emergency at Diablo Canyon Nuclear Power Plant

International Nuclear Information System (INIS)

Shih, C.C.; Thuillier, R.H.

1984-01-01

The U.S. Nuclear Regulatory Commission requires that nuclear power plants provide for rapid assessment and response in the event of a radiological emergency. At the Diablo Canyon Nuclear Power Plant, Pacific Gas and Electric Company uses a system of linked central minicomputer, satellite desktop computers and microprocessors to provide decision makers with timely and pertinent information in emergency situations. The system provides for data acquisition and microprocessing at meteorological and radiological monitoring sites. Current estimates or projections of offsite dose commitment are made in real-time by a dispersion/dose calculation model. Computerized dissemination of data and calculational results to decision makers at the government and utility levels is also available. The basic system in use is a commercially available Emergency Assessment and Response System (EARS). This generic system has been modified in-house to meet requirements specific to emergency situations at the plant. Distinctive features of the modification program includes: a highly professional man-machine interaction; consideration of site-specific factors; simulation of environmental radiology for development of drill scenarios; and concise, pertinent reports as input to decision making

Rebuilding and the private cloud of the hospital information system by the virtualization technology.

Science.gov (United States)

Yamashita, Yoshinori; Ogaito, Tatoku

2013-01-01

In our hospital, we managed an electronic health record system and many section subsystems as a hospital information system. By the expansion of these information systems, a system becomes complicated, and maintenance and operative cost increased. Furthermore, the environment that is available to medical information is demanded anywhere anytime by expansion of the computerization. However, the expansion of the information use becomes necessary for the expansion such as the personal protection of information for security. We became rebuilding and the private cloud of the hospital information system by the virtualization technology to solve such a problem. As a result, we were able to perform a decrease in number of the servers which constituted a system, a decrease in network traffic, reduction of the operative cost.

Stratification of mammographic computerized analysis by BI-RADS categories

International Nuclear Information System (INIS)

Lederman, Richard; Leichter, Isaac; Buchbinder, Shalom; Novak, Boris; Bamberger, Philippe; Fields, Scott

2003-01-01

The Breast Imaging Reporting and Data System (BI-RADS) was implemented to standardize characterization of mammographic findings. The purpose of the present study was to evaluate in which BI-RADS categories the changes recommended by computerized mammographic analysis are most beneficial. Archival cases including, 170 masses (101 malignant, 69 benign) and 63 clusters of microcalcifications (MCs; 36 malignant, 27 benign), were evaluated retrospectively, using the BI-RADS categories, by several radiologists, blinded to the pathology results. A computerized system then automatically extracted from the digitized mammogram features characterizing mammographic lesions, which were used to classify the lesions. The results of the computerized classification scheme were compared, by receiver operating characteristics (ROC) analysis, to the conventional interpretation. In the ''low probability of malignancy group'' (excluding BI-RADS categories 4 and 5), computerized analysis improved the A z of the ROC curve significantly, from 0.57 to 0.89. In the ''high probability of malignancy group'' (mostly category 5) the computerized analysis yielded an ROC curve with an A z of 0.99. In the ''intermediate probability of malignancy group'' computerized analysis improved the A z significantly, from 0.66 for to 0.83. Pair-wise analysis showed that in the latter group the modifications resulting from computerized analysis were correct in 83% of cases. Computerized analysis has the ability to improve the performance of the radiologists exactly in the BI-RADS categories with the greatest difficulties in arriving at a correct diagnosis. It increased the performance significantly in the problematic group of ''intermediate probability of malignancy'' and pinpointed all the cases with missed cancers in the ''low probability'' group. (orig.)

Computerized access to materials data. A progress report

International Nuclear Information System (INIS)

Rumble, J. Jr.

1985-01-01

As the effort to build a comprehensive computerized materials data system grows, it becomes more obvious that the benefits will be far-reaching. During this workshop, the enthusiasm of the participants grew steadily until the questions became not''What,'' but ''When?''. The engineering community within the United States has banded together many times to advance progress in engineering capability. The computerized materials data system requires such an effort, and the rewards will be substantial. Chapter 3 identifies changes in the use of materials data in the Nuclear Power Industry. Chapter 4 describes the EPRI experience in building computerized materials databases. In Chapter 5, the National Materials Property Data Network is discussed. The next four chapters present summaries of the workshop discussions and its conclusions. Chapter 6 discusses the content of the proposed system, Chapter 7 its size and the data sources, and Chapter 8 the user interfaces and system capabilities. In Chapter 9, ways of making further progress are outlined

The success or failure of management information systems: A theoretical approach

Energy Technology Data Exchange (ETDEWEB)

Curlee, T.R.; Tonn, B.T.

1987-03-01

Work has been done by various disciplines to address the reasons why modern, computerized management information systems either succeed or fail. However, the studies are not based on a well-defined conceptual framework and the focus has been narrow. This report presents a comprehensive conceptual framework of how an information system is used within an organization. This framework not only suggests how the use of an information system may translate into productivity improvements for the implementing organization but also helps to identify why a system may succeed or fail. A major aspect of the model is its distinction between the objectives of the organization in its decision to implement an information system and the objectives of the individual employees who are to use the system. A divergence between these objectives can lead to system underutilization or misuse at the expense of the organization's overall productivity.

Outline of a computerized nuclear material accounting system applicable to nuclear power reactors

International Nuclear Information System (INIS)

Handshuh, J.W.

1975-01-01

A computerized nuclear material accounting system is described which enables a utility to account for its material throughout the entire fuel cycle. From input of transactions, the system records and reports inventories and transactions by accounts which the user may establish for discrete locations, item control areas, further subdivisions, and material types. Account numbers are designed so that accounts and records are automatically sorted in the order desired. The system also generates the Material Status Reports for the Nuclear Regulatory Commission

Development of the Advanced Nuclear Safety Information Management (ANSIM) System

Energy Technology Data Exchange (ETDEWEB)

Sohn, Jae Min; Ko, Young Cheol; Song, Tai Gil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

Korea has become a technically independent nuclear country and has grown into an exporter of nuclear technologies. Thus, nuclear facilities are increasing in significance at KAERI (Korea Atomic Energy Research Institute), and it is time to address the nuclear safety. The importance of nuclear safety cannot be overemphasized. Therefore, a management system is needed urgently to manage the safety of nuclear facilities and to enhance the efficiency of nuclear information. We have established ISP (Information Strategy Planning) for the Integrated Information System of nuclear facility and safety management. The purpose of this paper is to develop a management system for nuclear safety. Therefore, we developed the Advanced Nuclear Safety Information Management system (hereinafter referred to as the 'ANSIM system'). The ANSIM system has been designed and implemented to computerize nuclear safety information for standardization, integration, and sharing in real-time. Figure 1 shows the main home page of the ANSIM system. In this paper, we describe the design requirements, contents, configurations, and utilizations of the ANSIM system

Computerized asset management and maintenance systems in ST

CERN Document Server

Sánchez-Corral, E

1999-01-01

The ST division manages and therefore maintains the CERN technical installations. A maintenance database application exists for every technical domain. A total of six different databases were built during the last 10 years and are based on the RAPIER maintenance program. As the Computerized Asset Management and Maintenance Systems (CAMMS) technology has evolved, the RAPIER system has become obsolete. Therefore we are forced to migrate to its latest version, MP5, before the year 2000. The migration path must be defined, leading from the current situation to a fully operational MP5 application. The major elements of each migration path consist in determining the functionality to use, defining the operation of it, adapting and/or creating procedures, converting data and providing training. A migration is always a process of change. The migration presents a unique opportunity to evaluate the current implementations, adapt them to the requirements and exploit the new features offered. Obsolete data and inconsisten...

Diagnostics of neuromuscular diseases with the aid of computerized tomography

Energy Technology Data Exchange (ETDEWEB)

Visser, M de; Verbeeten, Jr, B J

1988-06-04

In this article the diagnosis of neuromuscular diseases with the aid of computerized tomography is treated. Computerized tomography of skeletal muscles give no information which is pathognomonic for particular diseases. But the technique can be used in the following aspects: to choose a muscle for a biopsy; when it is not possible to examine the function of a muscle, a CT scan can visualize morphological deviations; in the differentiation of muscle hypertrophy and pseudo-hypertrophy. For some cases as Becker-type muscular dystrophy, facioscapulohumeral dystrophy and Kugelberg-Welander type spinal muscular atrophy computerized tomography gives characteristic images. 10 refs.; 6 figs.

Diagnostics of neuromuscular diseases with the aid of computerized tomography

International Nuclear Information System (INIS)

Visser, M. de; Verbeeten, B.J. Jr.

1988-01-01

In this article the diagnosis of neuromuscular diseases with the aid of computerized tomography is treated. Computerized tomography of skeletal muscles give no information which is pathognomonic for particular diseases. But the technique can be used in the following aspects: to choose a muscle for a biopsy; when it is not possible to examine the function of a muscle, a CT scan can visualize morphological deviations; in the differentiation of muscle hypertrophy and pseudo-hypertrophy. For some cases as Becker-type muscular dystrophy, facioscapulohumeral dystrophy and Kugelberg-Welander type spinal muscular atrophy computerized tomography gives characteristic images. 10 refs.; 6 figs

Sustained User Engagement in Health Information Technology: The Long Road from Implementation to System Optimization of Computerized Physician Order Entry and Clinical Decision Support Systems for Prescribing in Hospitals in England.

Science.gov (United States)

Cresswell, Kathrin M; Lee, Lisa; Mozaffar, Hajar; Williams, Robin; Sheikh, Aziz

2017-10-01

To explore and understand approaches to user engagement through investigating the range of ways in which health care workers and organizations accommodated the introduction of computerized physician order entry (CPOE) and computerized decision support (CDS) for hospital prescribing. Six hospitals in England, United Kingdom. Qualitative case study. We undertook qualitative semi-structured interviews, non-participant observations of meetings and system use, and collected organizational documents over three time periods from six hospitals. Thematic analysis was initially undertaken within individual cases, followed by cross-case comparisons. We conducted 173 interviews, conducted 24 observations, and collected 17 documents between 2011 and 2015. We found that perceived individual and safety benefits among different user groups tended to facilitate engagement in some, while other less engaged groups developed resistance and unsanctioned workarounds if systems were perceived to be inadequate. We identified both the opportunity and need for sustained engagement across user groups around system enhancement (e.g., through customizing software) and the development of user competencies and effective use. There is an urgent need to move away from an episodic view of engagement focused on the preimplementation phase, to more continuous holistic attempts to engage with and respond to end-users. © Health Research and Educational Trust.

Measuring value for money: a scoping review on economic evaluation of health information systems.

Science.gov (United States)

Bassi, Jesdeep; Lau, Francis

2013-01-01

To explore how key components of economic evaluations have been included in evaluations of health information systems (HIS), to determine the state of knowledge on value for money for HIS, and provide guidance for future evaluations. We searched databases, previously collected papers, and references for relevant papers published from January 2000 to June 2012. For selection, papers had to: be a primary study; involve a computerized system for health information processing, decision support, or management reporting; and include an economic evaluation. Data on study design and economic evaluation methods were extracted and analyzed. Forty-two papers were selected and 33 were deemed high quality (scores ≥ 8/10) for further analysis. These included 12 economic analyses, five input cost analyses, and 16 cost-related outcome analyses. For HIS types, there were seven primary care electronic medical records, six computerized provider order entry systems, five medication management systems, five immunization information systems, four institutional information systems, three disease management systems, two clinical documentation systems, and one health information exchange network. In terms of value for money, 23 papers reported positive findings, eight were inconclusive, and two were negative. We found a wide range of economic evaluation papers that were based on different assumptions, methods, and metrics. There is some evidence of value for money in selected healthcare organizations and HIS types. However, caution is needed when generalizing these findings. Better reporting of economic evaluation studies is needed to compare findings and build on the existing evidence base we identified.

Stratification of mammographic computerized analysis by BI-RADS categories

Energy Technology Data Exchange (ETDEWEB)

Lederman, Richard [Department of Radiology, Hadassah University Hospital, Ein Kerem, Jerusalem (Israel); Leichter, Isaac [Department of Electro-Optics, Jerusalem College of Technology, P.O.B. 16031, Jerusalem (Israel); Buchbinder, Shalom [Department of Radiology of The Montefiore Medical Center, The University Hospital for the Albert Einstein College of Medicine, Bronx, New York (United States); Novak, Boris [Department of Applied Mathematics, Jerusalem College of Technology, P.O.B. 16031, Jerusalem 91160 (Israel); Bamberger, Philippe [Department of Electronics, Jerusalem College of Technology, POB 16031, Jerusalem (Israel); Fields, Scott [Department of Radiology, Hadassah University Hospital, Mt. Scopus, Jerusalem (Israel)

2003-02-01

The Breast Imaging Reporting and Data System (BI-RADS) was implemented to standardize characterization of mammographic findings. The purpose of the present study was to evaluate in which BI-RADS categories the changes recommended by computerized mammographic analysis are most beneficial. Archival cases including, 170 masses (101 malignant, 69 benign) and 63 clusters of microcalcifications (MCs; 36 malignant, 27 benign), were evaluated retrospectively, using the BI-RADS categories, by several radiologists, blinded to the pathology results. A computerized system then automatically extracted from the digitized mammogram features characterizing mammographic lesions, which were used to classify the lesions. The results of the computerized classification scheme were compared, by receiver operating characteristics (ROC) analysis, to the conventional interpretation. In the ''low probability of malignancy group'' (excluding BI-RADS categories 4 and 5), computerized analysis improved the A{sub z}of the ROC curve significantly, from 0.57 to 0.89. In the ''high probability of malignancy group'' (mostly category 5) the computerized analysis yielded an ROC curve with an A {sub z}of 0.99. In the ''intermediate probability of malignancy group'' computerized analysis improved the A {sub z}significantly, from 0.66 for to 0.83. Pair-wise analysis showed that in the latter group the modifications resulting from computerized analysis were correct in 83% of cases. Computerized analysis has the ability to improve the performance of the radiologists exactly in the BI-RADS categories with the greatest difficulties in arriving at a correct diagnosis. It increased the performance significantly in the problematic group of ''intermediate probability of malignancy'' and pinpointed all the cases with missed cancers in the ''low probability'' group. (orig.)

PADS (Patient Archiving and Documentation System): a computerized patient record with educational aspects.

Science.gov (United States)

Hohnloser, J H; Pürner, F

1992-01-01

Rapid acquisition and analysis of information in an Intensive Care Unit (ICU) setting is essential, even more so the documentation of the decision making process which has vital consequences for the lives of ICU patients. We describe an Ethernet based local area network (LAN) with clinical workstations (Macintosh fx, ci). Our Patient Archiving and Documentation System (PADS) represents a computerized patient record presently used in a university hospitals' ICU. Taking full advantage of the Macintosh based graphical user interface (GUI) our system enables nurses and doctors to perform the following tasks: admission, medical history taking, physical examination, generation of problem lists and follow up notes, access to laboratory data and reports, semiautomatic generation of a discharge summary including full word processor capabilities. Furthermore, the system offers rapid, consistent and complete automatic encoding of diagnoses following the International Classification of Disease (ICD; WHO, [1]). For educational purposes the user can also view disease entities or complications related to the diagnoses she/he encoded. The system has links to other educational programs such as cardiac auscultation. A MEDLINE literature search through a CD-ROM based system can be performed without exiting the system; also, CD-ROM based medical textbooks can be accessed as well. Commercially available Macintosh programs can be integrated in the system without existing the main program thus enabling users to customize their working environment. Additional options include automatic background monitoring of users learning behavior, analyses and graphical display of numerous epidemiological and health care related problems. Furthermore, we are in the process of integrating sound and digital video in our system. This system represents one in a line of modular departmental models which will eventually be integrated to form a decentralized Hospital Information System (HIS).

Computerized tomography

International Nuclear Information System (INIS)

1980-01-01

Improvements in the design of computerized tomographic X-ray equipment are described which lead to improvements in the mechanical properties, speed and size of scanning areas. The method envisages the body being scanned as a two-dimensional matrix of elements arising from a plurality of concentric rings. The concentric centre need not coincide with the axis of rotation. The procedures for rotation of the X-ray beam and detectors around the patient and for translating the measured information into attenuation coefficients for each matrix element of the body are described in detail. Explicit derivations are given for the mathematical formulae used. (U.K.)

Respiratory care management information systems.

Science.gov (United States)

Ford, Richard M

2004-04-01

Hospital-wide computerized information systems evolved from the need to capture patient information and perform billing and other financial functions. These systems, however, have fallen short of meeting the needs of respiratory care departments regarding work load assessment, productivity management, and the level of outcome reporting required to support programs such as patient-driven protocols. The respiratory care management information systems (RCMIS) of today offer many advantages over paper-based systems and hospital-wide computer systems. RCMIS are designed to facilitate functions specific to respiratory care, including assessing work demand, assigning and tracking resources, charting, billing, and reporting results. RCMIS incorporate mobile, point-of-care charting and are highly configurable to meet the specific needs of individual respiratory care departments. Important and substantial benefits can be realized with an RCMIS and mobile, wireless charting devices. The initial and ongoing costs of an RCMIS are justified by increased charge capture and reduced costs, by way of improved productivity and efficiency. It is not unusual to recover the total cost of an RCMIS within the first year of its operation. In addition, such systems can facilitate and monitor patient-care protocols and help to efficiently manage the vast amounts of information encountered during the practitioner's workday. Respiratory care departments that invest in RCMIS have an advantage in the provision of quality care and in reducing expenses. A centralized respiratory therapy department with an RCMIS is the most efficient and cost-effective way to monitor work demand and manage the hospital-wide allocation of respiratory care services.

Privacy, confidentiality and automated health information systems.

Science.gov (United States)

Vuori, H

1977-12-01

Professor Vuori's paper, first presented at the fourth Medico-legal Conference in Prague in the spring of this year, deals with the problem of the maintenance of confidentiality in computerized health records. Although more and more information is required, the hardware of the computer systems is so sophisticated that it would be very expensive indeed to 'break in' and steal from a modern data bank. Those concerned with programming computers are becoming more aware of their responsibilities concerning confidentiality and privacy, to the extent that a legal code of ethics for programmers is being formulated. They are also aware that the most sensitive of all relationships--the doctor-patient relationship--could be in danger if they failed to maintain high standards of integrity. An area of danger is where administrative boundaries between systems must be crossed--say between those of health and employment. Protection of privacy must be ensured by releasing full information about the type of data being stored, and by maintaining democratic control over the establishment of information systems.

MIDAS [Master Information and Data Acquisition System

International Nuclear Information System (INIS)

Ball, D.L.

1986-01-01

The Master Information and Data Acquisition System (MIDAS) is a computerized work control system that provides 24-hour, real-time access to plant equipment information and work package status. It is used in the 400 Area of the Department of Energy (DOE) Hanford Site in Richland, Washington. MIDAS was originally created to aid in the release and control of work at the Fast Flux Test Facility (FFTF), which is operated by the Westinghouse Hanford Company for the DOE. After MIDAS performed that function at FFTF successfully for over two years, its role was expanded to provide similar functions for other facilities supporting the LMR mission. Through its ability to provide online, accurate information on plant components, safety criteria, and work package status, MIDAS reinforces Operations functions and the control and authorization of maintenance activities in the FFTF plant and in other related facilities. Thus, MIDAS enhances the operational safety, as well as the planning and scheduling process for these facilities. MIDAS consists of three parts: The Plant Tracking System (PTS), the Work Control Log (WCL), and the MIDAS Component Indices

A Blood Bank Information Management System

Science.gov (United States)

Farmer, James J.

1982-01-01

A computerized Blood Bank Management system is described. Features include product oriented data input, inventory control reports, product utilization reports, rapid retrieval of individual patient reports. Relative benefits of the system are discussed.

Development of a testing methodology for computerized procedure system based on JUnit framework and MFM

International Nuclear Information System (INIS)

Qin, Wei

2004-02-01

Paper Based Procedure (PBP) and Computerized Procedure System (CPS) are studied to demonstrate that it is necessary to develop CPS in Nuclear Power Plant (NPP) Instrumentation and Control (I and C) system. Computerized procedure system is actually a software system. All the desired and undesired properties of a software system can be described and evaluated as software qualities. Generally, software qualities can be categorized into product quality and process quality. In order to achieve product quality, the process quality of a software system should also be considered and achieved. Characteristics of CPS will be described to analyse the product and process of an example CPS: ImPRO. At the same time, several main product and process issues will be analysed from Verification and Validation (V and V) point of view. It is concluded and suggested that V and V activities can also be regarded as a software development process, this point of view then is applied to the V and V activities of ImPRO as a systematic approach of testing of ImPRO. To support and realize this approach, suitable testing technologies and testing strategies are suggested based on JUnit framework and Multi-level Flow Modeling (MFM)

2D histomorphometric quantification from 3D computerized tomography

International Nuclear Information System (INIS)

Lima, Inaya; Oliveira, Luis Fernando de; Lopes, Ricardo T.; Jesus, Edgar Francisco O. de; Alves, Jose Marcos

2002-01-01

In the present article, preliminary results are presented showing the application of the tridimensional computerized microtomographic technique (3D-μCT) to bone tissue characterization, through histomorphometric quantification which are based on stereologic concepts. Two samples of human bone were correctly prepared to be submitted to the tomographic system. The system used to realize that process were a radiographic system with a microfocus X-ray tube. Through these three processes, acquisition, reconstruction and quantification, it was possible to get the good results and coherent to the literature data. From this point, it is intended to compare these results with the information due the conventional method, that is, conventional histomorphometry. (author)

Comparison, with regard to safety, between a hard-wired reactor protection system and a computerized protection system. Pt. 1

International Nuclear Information System (INIS)

Buettner, W.E.

1976-07-01

The study compares a conventional hard-wired dynamic reactor protection system with a computerized protection system. In the comparison, only the unequivocally safety-oriented protection actions are considered. In the first part, the different structures of both systems and the method of verification for their functional safety will be described. In the second part, the mean unavailability in case of demand for both systems under defined conditions will be determined. (orig.) [de

Information management systems improve advanced plant design

International Nuclear Information System (INIS)

Turk, R.S.; Serafin, S.A.; Leckley, J.B.

1994-01-01

Computer-aided engineering tools are proving invaluable in both the design and operation of nuclear power plants. ABB Combustion Engineering's Advanced Light Water Reactor (ALWR) features a computerized Information Management System (IMS) as an integral part of the design. The System 80+IMS represents the most powerful information management tool for Nuclear Power Plants commercially available today. Developed by Duke Power Company specifically for use by nuclear power plant owner operators, the IMS consists of appropriate hardware and software to manage and control information flow for all plant related work or tasks in a systematic, consistent, coordinated and informative manner. A significant feature of this IMS is that it is primarily based on plant data. The principal design tool, PASCE (Plant Application and Systems from Combustion Engineering), is comprised of intelligent databases that describe the design and from which accurate plant drawings are created. Additionally the IMS includes, at its hub, a relational database management system and an associated document management system. The data-based approach and applications associated with the IMS were developed, and have proven highly effective, for plant modifications, configuration management, and operations and maintenance applications at Duke Power Company's operating nuclear plants. This paper presents its major features and benefits. 4 refs

Influence of step complexity and presentation style on step performance of computerized emergency operating procedures

Energy Technology Data Exchange (ETDEWEB)

Xu Song [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China); Li Zhizhong [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)], E-mail: zzli@tsinghua.edu.cn; Song Fei; Luo Wei; Zhao Qianyi; Salvendy, Gavriel [Department of Industrial Engineering, Tsinghua University, Beijing 100084 (China)

2009-02-15

With the development of information technology, computerized emergency operating procedures (EOPs) are taking the place of paper-based ones. However, ergonomics issues of computerized EOPs have not been studied adequately since the industrial practice is quite limited yet. This study examined the influence of step complexity and presentation style of EOPs on step performance. A simulated computerized EOP system was developed in two presentation styles: Style A: one- and two-dimensional flowcharts combination; Style B: two-dimensional flowchart and success logic tree combination. Step complexity was quantified by a complexity measure model based on an entropy concept. Forty subjects participated in the experiment of EOP execution using the simulated system. The results of data analysis on the experiment data indicate that step complexity and presentation style could significantly influence step performance (both step error rate and operation time). Regression models were also developed. The regression analysis results imply that operation time of a step could be well predicted by step complexity while step error rate could only partly predicted by it. The result of a questionnaire investigation implies that step error rate was influenced not only by the operation task itself but also by other human factors. These findings may be useful for the design and assessment of computerized EOPs.

Development of a computerized tomographic system based on the FAN-BEAM technique

International Nuclear Information System (INIS)

Junqueira, M.M.; Santos, C.A.C.; Borges, J.C.

1986-01-01

The Nuclear Instrumentation Laboratory, at COPPE/UFRJ, concentrates its researches in the development of computerized tomographic systems, looking for applications in industrial and medical non destructive analysing techniques. In this work we have projected and constructed a tomographic prototype, based on the FAN-BEAM technique for irradiating the object under analysis. An algorithm previously developed to analyse parallel beams, was modified and adapted to the FAN-BEAM geometry. (Author) [pt

Computerized reactor protection and safety related systems in nuclear power plants. Proceedings of a specialists' meeting. Working material

International Nuclear Information System (INIS)

1998-01-01

Though the majority of existing control and protection systems in nuclear power plants use old analogue technology and design philosophy, the use of computers in safety and safety related systems is becoming a current practice. The Specialists Meeting on ''Computerized Reactor Protection and Safety Related Systems in Nuclear Power Plants'' was organized by IAEA (jointly by the Division of Nuclear Power and the Fuel Cycle and the Division of Nuclear Installation Safety), in co-operation with Paks Nuclear Power Plant in Hungary and was held from 27-29 October 1997 in Budapest, Hungary. The meeting focused on computerized safety systems under refurbishment, software reliability issues, licensing experiences and experiences in implemented computerized safety and safety related systems. Within a meeting programme a technical visit to Paks NPP was organized. The objective of the meeting was to provide an international forum for the presentation and discussion on R and D, in-plant experiences in I and C important to safety, backfits and arguments for and reservations against the digital safety systems. The meeting was attended by 70 participants from 16 countries representing NPPs and utility organizations, design/engineering, research and development, and regulatory organizations. In the course of 4 sessions 25 technical presentations were made. The present volume contains the papers presented by national delegates and the conclusions drawn from the final general discussion

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Data manual

International Nuclear Information System (INIS)

Gilbert, B.G.; Reece, W.J.; Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.

1990-12-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal computer. NUCLARR can furnish the end user with data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented is a five-volume series of reports. Volume V: Data Manual provides a hard-copy representation of all data and related information available within the NUCLARR system software. This document is organized in three sections. Part 1 is the summary description, which presents an overview of the NUCLARR system and data processing procedures. Part 2 contains all data and information relevant to the human error probability (HEP) data side of NUCLARR. Data and information for the hardware component failure data (HCFD) side are presented in Part 3. 7 refs

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Data manual

International Nuclear Information System (INIS)

Gilbert, B.G.; Reece, W.J.; Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.

1990-12-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal computer. NUCLARR can furnish the end user with data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume V: Data Manual provides a hard-copy representation of all data and related information available within the NUCLARR system software. This document is organized in three sections. Part 1 is the summary description, which presents an overview of the NUCLARR system and data processing procedures. Part 2 contains all data and information relevant to the human error probability (HEP) side of NUCLARR. Data and information for the hardware component failure data (HCFD) side are presented in Part 3. 7 refs., 1 fig

Using the Five-Level Taiwan Triage and Acuity Scale Computerized System: Factors in Decision Making by Emergency Department Triage Nurses.

Science.gov (United States)

Chang, Wen; Liu, Hsueh-Erh; Goopy, Suzanne; Chen, Li-Chin; Chen, Hsiao-Jung; Han, Chin-Yen

2017-10-01

Triage classifies and prioritizes patients' care based on the acuity of the illness in emergency departments (EDs). In Taiwan, the five-level Taiwan Triage and Acuity Scale (TTAS) computerized system was implemented nationally in 2010. The purpose of this study was to understand which factors affect decision-making practices of triage nurses in the light of the implementation of the new TTAS tool and computerized system. The qualitative data were collected by in-depth interviews. Data saturation was reached with 16 participants. Content analysis was used. The results demonstrated that the factors affecting nurses' decision making in the light of the newly implemented computerized system sit within three main categories: external environmental, patients' health status, and nurses' experiences. This study suggests ensuring the patient's privacy while attending the triage desk, improving the critical thinking of triage nurses, and strengthening the public's understanding of the ED visits. These will make ED triage more efficient.

Computerized tomographic in non-destructive testing

International Nuclear Information System (INIS)

Lopes, R.T.

1988-01-01

The process of computerized tomography has been developed for medical imaging purposes using tomographs with X-ray, and little attention has been given to others possibles applications of technique, because of its cost. As an alternative for the problem, we constructed a Tomographic System (STAC-1), using gamma-rays, for nonmedical applications. In this work we summarize the basic theory of reconstructing images using computerized tomography and we describe the considerations leading to the development of the experimental system. The method of reconstruction image implanted in the system is the filtered backprojection or convolution, with a digital filters system to carried on a pre-filtering in the projections. The experimental system is described, with details of control and the data processing. An alternative and a complementary system, using film as a detector is shown in preliminary form . This thesis discuss and shows the theorical and practical aspects, considered in the construction of the STAC-1, and also its limitations and apllications [pt

Development of a generic, computerized nuclear material accountability system: NucMAS

International Nuclear Information System (INIS)

Cornell, M.D.; O'Leary, J.M.

1987-01-01

The application NucMAS provides basic computerized accountability functions for the Savannah River Plant (SRP) Separations Department Material Balance Areas (MBA's). These functions include data entry, data management, calculations, and report generation. NucMAS can be used both for routine reporting to the SRP central Material Control and Accounting (MC and A) system and for rapid ad hoc queries in emergency situations. The system is designed to work with any process handling one or more of the 17 accountable nuclear materials specified by the Department of Energy (DOE). It relies on user-supplied configuration data to drive data prompts, report headings, data validations, and calculations

A Method of Retrospective Computerized System Validation for Drug Manufacturing Software Considering Modifications

Science.gov (United States)

Takahashi, Masakazu; Fukue, Yoshinori

This paper proposes a Retrospective Computerized System Validation (RCSV) method for Drug Manufacturing Software (DMSW) that relates to drug production considering software modification. Because DMSW that is used for quality management and facility control affects big impact to quality of drugs, regulatory agency required proofs of adequacy for DMSW's functions and performance based on developed documents and test results. Especially, the work that explains adequacy for previously developed DMSW based on existing documents and operational records is called RCSV. When modifying RCSV conducted DMSW, it was difficult to secure consistency between developed documents and test results for modified DMSW parts and existing documents and operational records for non-modified DMSW parts. This made conducting RCSV difficult. In this paper, we proposed (a) definition of documents architecture, (b) definition of descriptive items and levels in the documents, (c) management of design information using database, (d) exhaustive testing, and (e) integrated RCSV procedure. As a result, we could conduct adequate RCSV securing consistency.

Health information systems: challenges for the 21st century.

Science.gov (United States)

Ball, M J; Lillis, J C

2000-08-01

No longer focused on mere automation of manual processes, healthcare technology is poised to transform practice. Healthcare information systems can extend and enhance the memory; streamline administrative processes; provide access to information where, when, and how it is needed; and manage the cost of care while protecting and improving clinical quality and customer satisfaction. To reap the benefits of information systems, healthcare professionals must take stock of the industry's current position on the road to transformation and determine how to manage the journey ahead. This article explores healthcare information technology trends, discusses emerging technologies such as the Internet and the computerized patient record, and offers future recommendations for achieving technology integration and acceptance. Key to this discussion is the belief that people-based skills such as cooperation, leadership, and creative thinking are just as important as--if not more important than--the actual technology.

Information technologies in biomedicine

CERN Document Server

Kawa, Jacek; Wieclawek, Wojciech

2014-01-01

New computerized approaches to various problems have become critically important in healthcare. Computer assisted diagnosis has been extended towards a support of the clinical treatment. Mathematical information analysis, computer applications have become standard tools underpinning the current rapid progress with developing Computational Intelligence. A computerized support in the analysis of patient information and implementation of a computer aided diagnosis and treatment systems, increases the objectivity of the analysis and speeds up the response to pathological changes. This book presents a variety of state-of-the-art information technology and its applications to the networked environment to allow robust computerized approaches to be introduced throughout the healthcare enterprise. Image analysis and its application is the traditional part that deals with the problem of data processing, recognition and classification. Bioinformatics has become a dynamically developed field of computer assisted biologic...

Computerized three-dimensional normal atlas

International Nuclear Information System (INIS)

Mano, Isamu; Suto, Yasuzo; Suzuki, Masataka; Iio, Masahiro.

1990-01-01

This paper presents our ongoing project in which normal human anatomy and its quantitative data are systematically arranged in a computer. The final product, the Computerized Three-Dimensional Normal Atlas, will be able to supply tomographic images in any direction, 3-D images, and coded information on organs, e.g., anatomical names, CT numbers, and T 1 and T 2 values. (author)

Development of a computerized tomographic system

International Nuclear Information System (INIS)

Borges, J.C.; Santos, C.A.C.

1986-01-01

The Nuclear Instrumentation Laboratory at COPPE/UFRJ has been developing techniques for detection and applications of nuclear radiations. A lot of research work has been done and resulted in several M.Sc. and D.Sc. thesis, concerning subjects like neutrongraphy, gammagraphy, image reconstruction, special detectors, etc. Recent progress and multiple applications of the computerized tomography to medical and industrial non-destructive tests, pushed the Laboratory to a vast program in this field of research. In this paper, we report what has been done and the results obtained. (Author) [pt

Implementation of computerized add-on testing for hospitalized patients in a large academic medical center.

Science.gov (United States)

Kim, Ji Yeon; Kamis, Irina K; Singh, Balaji; Batra, Shalini; Dixon, Roberta H; Dighe, Anand S

2011-05-01

Physician requests for additional testing on an existing laboratory specimen (add-ons) are resource intensive and generally require a phone call to the laboratory. Verbal orders such as these have been noted to be associated with errors in accuracy. The aim of this study was to compare a novel computerized system for add-on requests to the prior verbal system. We compare the computerized add-on request system to the verbal system with respect to order completeness and workflow. We demonstrate that the computerized add-on system resulted in the complete in-laboratory documentation of the add-on request 100% of the time, compared to 58% with the verbal add-on system. In addition, we show that documentation of a verbal add-on request in the electronic medical record (EMR) occurred for 4% of requests, while in the computerized system EMR documentation occurred 100% of the time. We further demonstrate that the computerized add-on request process was well accepted by providers and did not significantly change the test mix of the add-on requests. In computerized physician order entry (CPOE) implementations, add-on order functionality should be considered so these orders are documented in the EMR.

Development and application of computerized maintenance management system at a nuclear fuel cycle facilities

International Nuclear Information System (INIS)

Oh, Yon Woo; Kim, S. D.; Jang, K. D.; Kim, Y. G.

2001-12-01

In order to accomplish the purpose of research, it is the most important for the equipment to work well. The computerized maintenance management system proven by the case-studies can have an effect on the research and it can be one of the most major elements to assist the research at the research laboratory. To prevent the breakdown of the equipment at the research facility which can hinder the improvement of the research work, it is essential to maintain the equipment of facility without the sudden breakdown and to short the recovery time. If these elements such as the causes of the breakdown were well-managed and suvervised with care, this recovery time could be minimized. The aims of this research, therefore, are to introduce the development of the computerized maintenance management system and to apply it at the field in order to minimize the breakdown of the equipment and the recovery time and in order to perform the equipment maintenance service with the minimized expense and maximize the service efficiency through the planned management of the budget, the manpower and the service

Demonstration of SLUMIS: a clinical database and management information system for a multi organ transplant program.

OpenAIRE

Kurtz, M.; Bennett, T.; Garvin, P.; Manuel, F.; Williams, M.; Langreder, S.

1991-01-01

Because of the rapid evolution of the heart, heart/lung, liver, kidney and kidney/pancreas transplant programs at our institution, and because of a lack of an existing comprehensive database, we were required to develop a computerized management information system capable of supporting both clinical and research requirements of a multifaceted transplant program. SLUMIS (ST. LOUIS UNIVERSITY MULTI-ORGAN INFORMATION SYSTEM) was developed for the following reasons: 1) to comply with the reportin...

Replacement of the computerized control system at NPP under operation

International Nuclear Information System (INIS)

Ermolaev, A.D.; Rakitin, I.D.

1985-01-01

Reasons and preconditions for replacement of the computerized control systems (CCS) at NPP under operation are consi-- dered. Problems dealing with management of CCS replacement, maintenance of a new CCS as well as NPP personnel training for the new system maintenance are discussed. A necessity of NPP personnel participation in these works in order to adapt CCS to requirements of NPP operation personnel and to initiate the training process is underlined. Replacement of CCS at NPP under operation is associated, as a rule, with obsolescence of old systems not ensuring growing requirements to NPP workability and safety. Principles observed at CCS replacement are reduced, mainly, to the following; maximum utilizatian of existing equipment, metal strUctures, cables, instruments, power supplies, ventilation system minimum of construction works and new communications; the least change of acting panels and boxes; changes in control desks should be introduced on the basis of the analysis of operator actions '

Interactive information system on the nuclear physics properties of nuclides and radioactive decay chains

International Nuclear Information System (INIS)

Plyaskin, V.I.; Kosilov, R.A.; Manturov, G.N.

2001-01-01

A brief review is given of a computerized information system on the nuclear physics properties of nuclides and radioactive decay chains. The main difference between the system presented here and those already in existence is that these evaluated databases of nuclear physics constants are linked to a set of programs, thus enabling analysis of a wide range of problems regarding various nuclear physics applications. (author)

Radiodiagnostic system combining scintillation GKS-2 γ camera and SAORI-01 computerized unit

International Nuclear Information System (INIS)

Kalashnikov, S.D.; Mishchenko, S.V.; Chuprov, P.V.

1986-01-01

A medical radiodiagnostic system prising the GKS-2 scintillation gamma chamber and the on-line data processing system is described. The gamma chamber consists of a detector, a two-channel control console, a microprocessor system for correction of distortions,system of photographic recording of images from an oscilloscopic display, a digital display-monitor and 6 accessiory collimators with trucks. GKS-2 has the increased spatial resolution, fast response and image homogeneity. Application of GKS-2 together with the SAORI-01 specialized on-line system,comprising the measuring computerized system, the colour-graphic display controller the polarizer photographic recording device for scanning image from the display screen and a system of base software, expands substantially diagnostic possibilities of equipment

Computerized materials protection, control, and accountability

International Nuclear Information System (INIS)

Whiteson, R.; Seitz, S.; Landry, R.P.; Hadden, M.L.; Painter, J.A.

1997-01-01

The proliferation of nuclear weapons, along with the technical knowledge and materials needed to make these weapons, is an enduring problem of international urgency. Current international nuclear nonproliferation efforts are aimed at deterring, detecting, and responding to proliferation of weapons of mass destruction. These safeguards efforts are being implemented by applying preeminent science and technology to the management and control of nuclear materials. By strengthening systems of nuclear material protection, control, and accountability (MPC and A), one can reduce the threat of nuclear weapons proliferation. Two major programs of international cooperation are now underway to achieve this goal. The first is between the US Department of Energy (DOE) and the Institutes of the Russian Federation (Laboratory-to-Laboratory Program), and the second is between the US Government and Governments of the former Soviet Republics (Government-to-Government Program). As part of these programs, the DOE is working with facilities to assist them in implementing computerized MPC and A systems. This work is a collaboration between computer scientists and safeguards experts in both the US and the new Republics. The US is making available technology and expertise to enable Russian experts to build on computerized MPC and A software developed in the US. This paper describes the joint efforts of these international teams to develop sophisticated computerized MPC and A systems using modern computer hardware and software technology. These systems are being customized to meet the site-specific needs of each facility

The enhancement of security in healthcare information systems.

Science.gov (United States)

Liu, Chia-Hui; Chung, Yu-Fang; Chen, Tzer-Shyong; Wang, Sheng-De

2012-06-01

With the progress and the development of information technology, the internal data in medical organizations have become computerized and are further established the medical information system. Moreover, the use of the Internet enhances the information communication as well as affects the development of the medical information system that a lot of medical information is transmitted with the Internet. Since there is a network within another network, when all networks are connected together, they will form the "Internet". For this reason, the Internet is considered as a high-risk and public environment which is easily destroyed and invaded so that a relevant protection is acquired. Besides, the data in the medical network system are confidential that it is necessary to protect the personal privacy, such as electronic patient records, medical confidential information, and authorization-controlled data in the hospital. As a consequence, a medical network system is considered as a network requiring high security that excellent protections and managerial strategies are inevitable to prevent illegal events and external attacks from happening. This study proposes secure medical managerial strategies being applied to the network environment of the medical organization information system so as to avoid the external or internal information security events, allow the medical system to work smoothly and safely that not only benefits the patients, but also allows the doctors to use it more conveniently, and further promote the overall medical quality. The objectives could be achieved by preventing from illegal invasion or medical information being stolen, protecting the completeness and security of medical information, avoiding the managerial mistakes of the internal information system in medical organizations, and providing the highly-reliable medical information system.

Survey of methods for improving operator acceptance of computerized aids

International Nuclear Information System (INIS)

Frey, P.R.; Kisner, R.A.

1982-04-01

The success of current attempts to improve the operational performance and safety of nuclear power plants by installing computerized operational aids in the control rooms is dependent, in part, on the operator's attitude toward the aid. Utility experience with process computer systems indicates that problems may already exist with operator acceptance of computerized aids. The growth of the role that computers have in nuclear power plants makes user acceptance of computer technology an important issue for the nuclear industry. The purpose of this report is to draw from the literature factors related to user acceptance of computerized equipment that may also be applicable to the acceptance of computerized aids used in the nuclear power plant control room

Survey of methods for improving operator acceptance of computerized aids

Energy Technology Data Exchange (ETDEWEB)

Frey, P. R.; Kisner, R. A.

1982-04-01

The success of current attempts to improve the operational performance and safety of nuclear power plants by installing computerized operational aids in the control rooms is dependent, in part, on the operator's attitude toward the aid. Utility experience with process computer systems indicates that problems may already exist with operator acceptance of computerized aids. The growth of the role that computers have in nuclear power plants makes user acceptance of computer technology an important issue for the nuclear industry. The purpose of this report is to draw from the literature factors related to user acceptance of computerized equipment that may also be applicable to the acceptance of computerized aids used in the nuclear power plant control room.

Build Your Own Inventory System. Annual Cost: $100.00 (Approximate). Fixed Assets, Materials and Supplies. The Practical Elements for a Computerized, Continuing Inventory System in Schools and Use in Determining a Measure for Instructional Cost.

Science.gov (United States)

Payne, Arnold, Comp.

This publication presents performance flow charts and other accompanying forms that are elements of an economical computerized continuing inventory system. The system described here is intended to serve school systems as an adequate fixed asset system and to provide a computerized inventory model that offers support for costs of future educational…

Computerized Operator Support System – Phase II Development

Energy Technology Data Exchange (ETDEWEB)

Ulrich, Thomas A.; Boring, Ronald L.; Lew, Roger T.; Thomas, Kenneth D.

2015-02-01

A computerized operator support system (COSS) prototype for nuclear control room process control is proposed and discussed. The COSS aids operators in addressing rapid plant upsets that would otherwise result in the shutdown of the power plant and interrupt electrical power generation, representing significant costs to the owning utility. In its current stage of development the prototype demonstrates four advanced functions operators can use to more efficiently monitor and control the plant. These advanced functions consist of: (1) a synthesized and intuitive high level overview display of system components and interrelations, (2) an enthalpy-based mathematical chemical and volume control system (CVCS) model to detect and diagnose component failures, (3) recommended strategies to mitigate component failure effects and return the plant back to pre-fault status, and (4) computer-based procedures to walk the operator through the recommended mitigation actions. The COSS was demonstrated to a group of operators and their feedback was collected. The operators responded positively to the COSS capabilities and features and indicated the system would be an effective operator aid. The operators also suggested several additional features and capabilities for the next iteration of development. Future versions of the COSS prototype will include additional plant systems, flexible computer-based procedure presentation formats, and support for simultaneous component fault diagnosis and dual fault synergistic mitigation action strategies to more efficiently arrest any plant upsets.

Reducing drug–herb interaction risk with a computerized reminder system

Directory of Open Access Journals (Sweden)

Lin SS

2015-02-01

Full Text Available Sheng-Shing Lin,1,2 Chiu-Lin Tsai,3 Ching-Yeh Tu,3 Ching-Liang Hsieh2,4,5 1Graduate Institute of Chinese Medicine, College of Chinese Medicine, China Medical University, 2Department of Chinese Medicine, China Medical University Hospital, 3Division of Chinese Medicine, Department of Pharmacy, China Medical University Hospital, 4Graduate Institute of Integrated Medicine, College of Chinese Medicine, China Medical University, 5Research Center for Chinese Medicine and Acupuncture, China Medical University, Taichung, Taiwan Background: Traditional Chinese medicine (TCM and Western medicine are both popular in Taiwan. Approximately 14.1% of Taiwanese residents use Western drugs and Chinese herbs concurrently; therefore, drug–herb interaction is critical to patient safety. This paper presents a new procedure for reducing the risk of drug interactions.Methods: Hospital computer systems are modified to ensure that drug–herb interactions are automatically detected when a TCM practitioner is writing a prescription. A pop-up reminder appears, warning of interactions, and the practitioner may adjust doses, delete herbs, or leave the prescription unchanged. A pharmacist will receive interaction information through the system and provide health education to the patient.Results: During the 2011–2013 study period, 256 patients received 891 herbal prescriptions with potential drug–herb interactions. Three of the 50 patients who concurrently used ginseng and antidiabetic drugs manifested hypoglycemia (fasting blood sugar level ≤70 mg/dL.Conclusion: Drug–herb interactions can cause adverse reactions. A computerized reminder system can enable TCM practitioners to reduce the risk of drug–herb interactions. In addition, health education for patients is crucial in avoiding adverse reaction by the interactions. Keywords: Traditional Chinese medicine, Western medicine, adverse reaction

The evolution of computerized displays in accident management

International Nuclear Information System (INIS)

DeBor, J.

1988-01-01

Key regulations implemented by the NRC in 1982, which included requirements such as upgraded emergency operating procedures, detailed control room design reviews, the addition of a safety parameter display system, and the inclusion of a degreed shift technical advisor as part of the operating staff, have enabled the use of computerized displays to evolve as an integral part of accident management within each of the four main vendor groups. Problems, however, remain to be resolved in the area of technical content, information reliability, and rules for use in order to achieve the goal of more reliable accident management in nuclear power plants

A study on a systematic approach of verification and validation of a computerized procedure system: ImPRO

International Nuclear Information System (INIS)

Qin, Wei; Seong, Poong Hyun

2003-01-01

Paper Based Procedure (PBP) and Computerized Procedure System (CPS) are studied to demonstrate that it is necessary to develop CPS in NPP I and C system. Computerized procedure system is actually a software system. All the desired and undesired properties of a software system can be described and evaluated as software qualities. Generally, software qualities can be categorized into product quality and process quality. In order to achieve product quality, the process quality of a software system should also be considered and achieved. Characteristics of CPS will be described to analyse the product and process of an example CPS: ImPRO. At the same time, several main product and process issues will be analysed from Verification and Validation (V and V) point of view. It is concluded and suggested that V and V activities can also be regarded as software development process, this point of view then is applied to the V and V activities of ImPRO as a systematic approach of V and V of ImPRO. To support and realize this approach, suitable testing technologies and testing strategies are suggested

Physicians' and Nurses' Opinions about the Impact of a Computerized Provider Order Entry System on Their Workflow.

Science.gov (United States)

Ayatollahi, Haleh; Roozbehi, Masoud; Haghani, Hamid

2015-01-01

In clinical practices, the use of information technology, especially computerized provider order entry (CPOE) systems, has been found to be an effective strategy to improve patient care. This study aimed to compare physicians' and nurses' views about the impact of CPOE on their workflow. This case study was conducted in 2012. The potential participants included all physicians (n = 28) and nurses (n = 145) who worked in a teaching hospital. Data were collected using a five-point Likert-scale questionnaire and were analyzed using SPSS version 18.0. The results showed a significant difference between physicians' and nurses' views about the impact of the system on interorganizational workflow (p = .001) and working relationships between physicians and nurses (p = .017). Interorganizational workflow and working relationships between care providers are important issues that require more attention. Before a CPOE system is designed, it is necessary to identify workflow patterns and hidden structures to avoid compromising quality of care and patient safety.

Development of a computerized operator support system for BWR power plant

International Nuclear Information System (INIS)

Monta, K.; Sekimizu, K.; Sato, N.; Araki, T.; Mori, N.

1985-01-01

A computerized operator support system for BWR power plant has been developed since 1980 supported by the Japanese government. The main functions of the systems are post trip operational guidance, disturbance analysis, standby system management, operational margin monitoring and control rod operational guidance. The former two functions aim at protection against incidents during operation of nuclear power plants and the latter three functions aim at their prevention. As the final stage of the development, these functions are combined with the plant supervision function and are organized as an advanced man-machine interface for BWR power plant. During the above process, operator task analyses are performed to enable synthesis of these support functions for right fit to operator tasks and to realize a hierarchical structure for CRT displays for right fit to operators cognitive needs. (author)

Development and trial operation of a site-wide computerized material accounting system at Kurchatov Institute

International Nuclear Information System (INIS)

Roumiantsev, A.N.; Ostroumov, Y.A.; Yevstropov, A.V.

1997-01-01

Since August 1994 Kurchatov Institute in cooperation with several US Department of Energy Laboratories has been developing a site-wide computerized material accounting system for nuclear materials. In 1994 a prototype system was put into trial operation at two Kurchatov facilities. Evaluation of this prototype led to the development of a new computerized material accounting system named KI-MACS, which has been operational since 1996. This system is a site-wide local secure computer network with centralized database capable of dealing with strictly confidential data and performing near-real time accountancy. It utilizes a Microsoft Windows NT operating system with SQL Server and Visual Basic, and has a 'star'-like network architecture. KI-MACS is capable of dealing with materials in itemized and bulk form, and can perform statistical evaluations of measurements and material balance. KI-MACS is fully integrated with bar code equipment, electronic scales, gamma-ray spectrometers and an Active Well Coincidence Counter, thus providing almost on-line evaluation and utilization of results of measurements, item identification and accounting. At present KI-MACS is being used in Physical Inventory Taking at the Kurchatov Central Storage Facility, and by the end of 1997 will be installed at twelve Kurchatov nuclear facilities

Development and trial operation of a site-wide computerized material accounting system at Kurchatov Institute

Energy Technology Data Exchange (ETDEWEB)

Roumiantsev, A.N.; Ostroumov, Y.A.; Yevstropov, A.V. [Kurchatov Institute RRC, Moscow (Russian Federation)] [and others

1997-11-01

Since August 1994 Kurchatov Institute in cooperation with several US Department of Energy Laboratories has been developing a site-wide computerized material accounting system for nuclear materials. In 1994 a prototype system was put into trial operation at two Kurchatov facilities. Evaluation of this prototype led to the development of a new computerized material accounting system named KI-MACS, which has been operational since 1996. This system is a site-wide local secure computer network with centralized database capable of dealing with strictly confidential data and performing near-real time accountancy. It utilizes a Microsoft Windows NT operating system with SQL Server and Visual Basic, and has a `star`-like network architecture. KI-MACS is capable of dealing with materials in itemized and bulk form, and can perform statistical evaluations of measurements and material balance. KI-MACS is fully integrated with bar code equipment, electronic scales, gamma-ray spectrometers and an Active Well Coincidence Counter, thus providing almost on-line evaluation and utilization of results of measurements, item identification and accounting. At present KI-MACS is being used in Physical Inventory Taking at the Kurchatov Central Storage Facility, and by the end of 1997 will be installed at twelve Kurchatov nuclear facilities.

Justifying an information system.

Science.gov (United States)

Neal, T

1993-03-01

A four-step model for the hospital pharmacist to use in justifying a computerized information system is described. In the first step, costs are identified and analyzed. Both the costs and the advantages of the existing system are evaluated. A request for information and a request for proposal are prepared and sent to vendors, who return estimates of hardware, software, and support costs. Costs can then be merged and analyzed as one-time costs, recurring annual costs, and total costs annualized over five years. In step 2, benefits are identified and analyzed. Tangible economic benefits are those that directly reduce or avoid costs or directly enhance revenues and can be measured in dollars. Intangible economic benefits are realized through a reduction in overhead and reallocation of labor and are less easily measured in dollars. Noneconomic benefits, some involving quality-of-care issues, can also be used in the justification. Step 3 consists of a formal risk assessment in which the project is broken into categories for which specific questions are answered by assigning a risk factor. In step 4, both costs and benefits are subjected to a financial analysis, the object of which is to maximize the return on investment to the institution from the capital being requested. Calculations include return on investment based on the net present value of money, internal rate of return, payback period, and profitability index. A well-designed justification for an information system not only identifies the costs, risks, and benefits but also presents a plan of action for realizing the benefits.

Improving CANDU plant operation and maintenance through retrofit information technology systems

International Nuclear Information System (INIS)

Lupton, L.R.; Judd, R.A.; MacBeth, M.J.

1998-01-01

CANDU plant owners are facing an increasingly competitive environment for the generation of electricity. To meet this challenge, all owners have identified that information technology offers opportunities for significant improvements in CANDU operation, maintenance and administration (OM and A) costs. Targeted information technology application areas include instrumentation and control, engineering, construction, operations and plant information management. These opportunities also pose challenges and issues that must be addressed if the full benefits of the advances in information technology are to be achieved. Key among these are system hardware and software maintenance, and obsolescence protection; AECL has been supporting CANDU stations with the initial development and evaluation of systems to improve plant performance and cost. Key initiatives that have been implemented or are in the process of being implemented in some CANDU plants to achieve operational benefits include: critical safety parameter monitor system; advanced computerized annunciation system; plant historical data system; and plant display system. Each system will be described in terms of its role in enhancing current CANDU plant performance and how they will contribute to future CANDU plant performance

Solid Waste Information Management System (SWIMS). Data summary, Fiscal Year 1979

International Nuclear Information System (INIS)

Batchelder, H.M.

1980-07-01

The Solid Waste Information Management System (SWIMS) maintains computerized records on a master data base. It provides a comprehensive system for cataloging and assembling data into output reports. The system summarizes the solid radioactive waste generation, disposal, and storage information throughout the Department of Energy (DOE). The SWIMS data base contains the information on the transuranic (TRU) and Low-Level Waste (LLW) generated, buried, or stored by DOE facilities. The generation data covers the period from the FY 1976 transition quarter through FY 1979. The burial and storage data includes the period from site initiation through FY 1979. This document includes the DOE Summary Reports from the SWIMS, presenting the FY 1979 data and the FY 1980 forecasts. Each report is detailed by nuclide category. The categorization allows the user to separate TRU data from LLW data, etc

Computerized tomography used in non-destructive testing of welded pipes

Energy Technology Data Exchange (ETDEWEB)

Iovea, M; Rizescu, C; Georgescu, G; Marinescu, A; Chitescu, P; Sava, T; Neagu, M; Avram, D [Institute of Research and Design for Electrical Engineering, ICPE - Electrostatica Splaiul Unirii 313, Sect. 3, R-74204 Bucharest (Romania)

1997-12-31

High quality standards in operation of National Power System is ensured by the use of high performance techniques and systems for Non-Destructive Testing (NDT). In recent years a number of new developments of the non-conventional technologies in the field of NDT have been achieved. In our laboratory there have been developed two computerized technologies using {gamma}-ray computed tomography and ultrasonic imaging methods. The standard techniques for imaging from projection data is computerized tomography. The industrial computerized tomography methods consist in the measurement of thin X - or {gamma}-ray beam attenuation when passing through some selected surface of the tested object, along several directions, so that by means of an adequate mathematical algorithm, a map of linear attenuation coefficients for the scanned surface is obtained. In fact, this map gives the density of materials occurring in the surface plane. Computerized tomography equipment, in various constructive versions, are intended for the following applications: (1) NDT in those fields requiring strict control of product quality, as for instance the nuclear energy, military industry, aeronautics, transportation fields, etc., (2) research in field of materials technology, machine engineering, metallurgy, welding, etc. This paper presents the applications of Computerized Tomography in NDT, by showing the results obtained on welded pipes, as well as the facilities offered by this method. In the final part, the paper presents the concept of a mobile tomography system for industrial pipes testing. (author). 2 figs., 7 refs.

Computerized tomography used in non-destructive testing of welded pipes

International Nuclear Information System (INIS)

Iovea, M.; Rizescu, C.; Georgescu, G.; Marinescu, A.; Chitescu, P.; Sava, T.; Neagu, M.; Avram, D.

1996-01-01

High quality standards in operation of National Power System is ensured by the use of high performance techniques and systems for Non-Destructive Testing (NDT). In recent years a number of new developments of the non-conventional technologies in the field of NDT have been achieved. In our laboratory there have been developed two computerized technologies using γ-ray computed tomography and ultrasonic imaging methods. The standard techniques for imaging from projection data is computerized tomography. The industrial computerized tomography methods consist in the measurement of thin X - or γ-ray beam attenuation when passing through some selected surface of the tested object, along several directions, so that by means of an adequate mathematical algorithm, a map of linear attenuation coefficients for the scanned surface is obtained. In fact, this map gives the density of materials occurring in the surface plane. Computerized tomography equipment, in various constructive versions, are intended for the following applications: 1) NDT in those fields requiring strict control of product quality, as for instance the nuclear energy, military industry, aeronautics, transportation fields, etc., 2) research in field of materials technology, machine engineering, metallurgy, welding, etc. This paper presents the applications of Computerized Tomography in NDT, by showing the results obtained on welded pipes, as well as the facilities offered by this method. In the final part, the paper presents the concept of a mobile tomography system for industrial pipes testing. (author). 2 figs., 7 refs

EMERIS: an advanced information system for a materials testing reactor

International Nuclear Information System (INIS)

Adorjan, F.; Buerger, L.; Lux, I.; Mesko, L.; Szabo, K.; Vegh, J.; Ivanov, V.V.; Mozhaev, A.A.; Yakovlev, V.V.

1990-06-01

The basic features of the Materials Testing Reactor of IAE, Moscow (MR) Information System (EMERIS) are outlined. The purpose of the system is to support reactor and experimental test loop operators by a flexible, fully computerized and user-friendly tool for the aquisition, analysis, archivation and presentation of data obtained during operation of the experimental facility. High availability of EMERIS services is ensured by redundant hardware and software components, and by automatic configuration procedure. A novel software feature of the system is the automatic Disturbance Analysis package, which is aimed to discover primary causes of irregularities occurred in the technology. (author) 2 refs.; 2 figs

[Is the ICU staff satisfied with the computerized physician order entry? A cross-sectional survey study].

Science.gov (United States)

Fumis, Renata Rego Lins; Costa, Eduardo Leite Vieira; Martins, Paulo Sergio; Pizzo, Vladimir; Souza, Ivens Augusto; Schettino, Guilherme de Paula Pinto

2014-01-01

To evaluate the satisfaction of the intensive care unit staff with a computerized physician order entry and to compare the concept of the computerized physician order entry relevance among intensive care unit healthcare workers. We performed a cross-sectional survey to assess the satisfaction of the intensive care unit staff with the computerized physician order entry in a 30-bed medical/surgical adult intensive care unit using a self-administered questionnaire. The questions used for grading satisfaction levels were answered according to a numerical scale that ranged from 1 point (low satisfaction) to 10 points (high satisfaction). The majority of the respondents (n=250) were female (66%) between the ages of 30 and 35 years of age (69%). The overall satisfaction with the computerized physician order entry scored 5.74±2.14 points. The satisfaction was lower among physicians (n=42) than among nurses, nurse technicians, respiratory therapists, clinical pharmacists and diet specialists (4.62±1.79 versus 5.97±2.14, phealthcare workers were satisfied, albeit not entirely, with the computerized physician order entry. The overall users' satisfaction with computerized physician order entry was lower among physicians compared to other healthcare professionals. The factors associated with satisfaction included the belief that digitalization decreased the workload and contributed to the intensive care unit quality with a user-friendly and accurate system and that digitalization provided concise information within a reasonable time frame.

Computerized three-dimensional treatment planning system utilizing interactive colour graphics

Energy Technology Data Exchange (ETDEWEB)

McShan, D L; Silverman, A; Lanza, D M; Reinstein, L E; Glicksman, A S [Rhode Island Hospital (US). Dept. of Radiation Oncology

1979-06-01

A new computerized radiation treatment planning system has been developed to aid in three-dimensional treatment planning. Using interactive colour graphics in conjunction with a PDP 11/45 computer, the system can take multiple transverse contours and construct a perspective display of the treatment region showing organ surfaces as well as cross-sectional contours. With interactively selected orientations, the display allows easy perception of the relative positioning of the treatment volume and the neighbouring anatomy. For external beam treatment planning, interactive computer simulation is used to select diaphragm sizes which best conform to the target area while avoiding sensitive structures. Dose calculations for the selected beams are carried out on multiple transverse planes. The calculational planes and surfaces are displayed in perspective with radiation dosage displayed in an interactively manipulated colour display. Altogether the system provides an easy assessment of the volume to be irradiated, interactive selection of optimal arrangements of treatment fields and a means of visualizing and evaluating the resulting dose distributions.

Pain assessment by children and adolescents during intraosseous anaesthesia using a computerized system (QuickSleeper).

Science.gov (United States)

Sixou, Jean-Louis; Marie-Cousin, Alexia; Huet, Adeline; Hingant, Bernard; Robert, Jean-Claude

2009-09-01

Intraosseous (IO) anaesthesia has been shown to be effective in children. However, the pain associated with anaesthetic injections, and its acceptance by children, have never been studied. The aim of this study was to assess the pain associated with the IO injection of 4% articaine with 1 : 200 000 epinephrine using the computerized QuickSleeper' system in a population of children and adolescents. IO anaesthesia was performed on patients aged 10.4 +/- 2.6 years of age. The patients assessed their pain on a faces pain scale (FPS) and on a visual analogue scale (VAS). The operators were also asked to assess signs of patient pain/discomfort. No pain or mild discomfort was reported by, respectively, 81.8% (FPS) and 83.9% (VAS) of the patients. Some 58.9% of children with previous experience of dental anaesthesia reported that computerized IO anaesthesia was more comfortable than traditional infiltration methods. Operators noted signs of discomfort during penetration and injection in 18.3% and 25.3% of the patients, respectively. This study showed that the majority of children reported no pain or mild pain when anaesthetic was administered by computerized needle rotation and solution deposition. This technique holds promise for use by trained paediatric dentists.

Interoperable computerized smart card based system for health insurance and health services applied in cardiology.

Science.gov (United States)

Cocei, Horia-Delatebea; Stefan, Livia; Dobre, Ioana; Croitoriu, Mihai; Sinescu, Crina; Ovricenco, Eduard

2002-01-01

In 1999 Romania started its health care reform by promulgating the Health Insurance Law. A functional and efficient health care system needs procedures for monitoring and evaluation of the medical services, communication between different service providers and entities involved in the system, integration and availability of the information. The final goal is a good response to the needs and demands of the patients and of the real life. For this project we took into account, on one hand, the immediate need for computerized systems for the health care providers and, on the other hand, the large number of trials and experiments with health smart cards across Europe. Our project will implement a management system based on electronic patient records to be used in all cardiology clinics and will experiment the health smart cards, will promote and demonstrate the capabilities of the smart card technology. We focused our attention towards a specific and also critical category of patients, those with heart diseases, and also towards a critical sector of the health care system--the emergency care. The patient card was tested on a number of 150 patients at a cardiology clinic in Bucharest. This was the first trial of a health smart card in Romania.

Development and application of computerized maintenance management system at a nuclear fuel cycle facilities

Energy Technology Data Exchange (ETDEWEB)

Oh, Yon Woo; Kim, S D; Jang, K D; Kim, Y G

2001-12-01

In order to accomplish the purpose of research, it is the most important for the equipment to work well. The computerized maintenance management system proven by the case-studies can have an effect on the research and it can be one of the most major elements to assist the research at the research laboratory. To prevent the breakdown of the equipment at the research facility which can hinder the improvement of the research work, it is essential to maintain the equipment of facility without the sudden breakdown and to short the recovery time. If these elements such as the causes of the breakdown were well-managed and suvervised with care, this recovery time could be minimized. The aims of this research, therefore, are to introduce the development of the computerized maintenance management system and to apply it at the field in order to minimize the breakdown of the equipment and the recovery time and in order to perform the equipment maintenance service with the minimized expense and maximize the service efficiency through the planned management of the budget, the manpower and the service00.

Computerized health physics record system at a Canadian fabrication facility

International Nuclear Information System (INIS)

Thind, K.S.

1984-01-01

This poster session will describe the types of Health Physics data input into a Hewlett-Packard 3000 computer. The Health Physics data base at this facility includes the following: employee hours data, airborne uranium concentrations, external dosemetry (badge readings), internal dosemetry (bioassay) and environmental health physics (stack sample results) data. It will describe the types of outputs achievable in the form of various reports, such as: individual employee health physics report for a given period, a general health physics summary report for a given period, individual urinalysis report, local air concentration report and graphs. The use of this computerized health physics record system in the overall radiation protection program at this facility is discussed

Human Factors and Technical Considerations for a Computerized Operator Support System Prototype

Energy Technology Data Exchange (ETDEWEB)

Ulrich, Thomas Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Medema, Heather Dawne [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

A prototype computerized operator support system (COSS) has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment. A COSS demonstration scenario has been developed for the prototype involving the Chemical & Volume Control System (CVCS) of the PWR simulator. It involves a primary coolant leak outside of containment that would require tripping the reactor if not mitigated in a very short timeframe. The COSS prototype presents a series of operator screens that provide the needed information and soft controls to successfully mitigate the event.

Prototype for an automated technical specification information system

International Nuclear Information System (INIS)

Quinn, E.L.; Mills, R.H.; Groves, J.E.

1985-01-01

The Southern California Edison (SCE) Automated Technical Specification Information System (ATSIS) at the San Onofre nuclear generating station (SONGS) has been developed as a prototype for an on-line information management system. This system provides an appropriate level of update, inquiry, and report generation capabilities to help support plant operators at SONGS in their efforts to anticipate, identify, document, and track certain actions and activities associated with plant technical specifications and associated limiting conditions of operation (LCOs). Substantially increased emphasis is being placed on adherence to nuclear regulatory requirements and commitments contained on the operating licenses of nuclear power plants. Additionally, as each year passes, such requirements are becoming increasingly detailed and complex, making it more and more difficult to track and ensure total compliance with the many and varied requirements. To assist the operations department at SONGs in meeting their regulatory commitments, in January 1985 SCE commenced gathering together the leading technical expertise available in the industry to develop a computerized system to track all technical specification-related equipment for operability and impact on LCOs

Computerized medical convocations

International Nuclear Information System (INIS)

Roche, Annie; Gilbert, Jean-Francois; Chiadot, Pierre; Vanzetto, Rene; Darnault, Jean

1969-06-01

Thanks to a close collaboration between the Medical and Social department and the Numerical Calculation Laboratory, a computerized convocation system has been implemented to reduce the administrative workload and to introduce more rigor in medical management, patient historical background and statistics. This work comprises: - a preliminary study of the data generating medical convocations and the related practical requirements; - the programming work according to these data; - the realisation of the mechano-graphical file covering the overall personnel [fr

Computerized reactor monitor and control for nuclear reactors

International Nuclear Information System (INIS)

Buerger, L.

1982-01-01

The analysis of a computerized process control system developed by Transelektro-KFKI-Videoton (Hangary) for a twenty-year-old research reactor in Budapest and or a new one in Tajura (Libya) is given. The paper describes the computer hardware (R-10) and the implemented software (PROCESS-24K) as well as their applications at nuclear reactors. The computer program provides for man-machine communication, data acquisition and processing, trend and alarm analysis, the control of the reactor power, reactor physical calculations and additional operational functions. The reliability and the possible further development of the computerized systems which are suitable for application at reactors of different design are also discussed. (Sz.J.)

Computerized Proof Techniques for Undergraduates

Science.gov (United States)

Smith, Christopher J.; Tefera, Akalu; Zeleke, Aklilu

2012-01-01

The use of computer algebra systems such as Maple and Mathematica is becoming increasingly important and widespread in mathematics learning, teaching and research. In this article, we present computerized proof techniques of Gosper, Wilf-Zeilberger and Zeilberger that can be used for enhancing the teaching and learning of topics in discrete…

The computerized point of order processing at the dairying plant

OpenAIRE

Pankauskienė, Dalia

2007-01-01

Darbe išanalizuota IS kūrimo principai ir problemos, pieno perdirbimo įmonės veikla. Pasirinktos užsakymų priėmimo sistemos projektavimo ir projekto realizavimo priemonės. Atliktas užsakymų priėmimo IS projektavimas. Sukurta duomenų bazė, kurios pagalba suprojektuota užsakymų priėmimo kompiuterizuota darbo vieta pieno perdirbimo įmonėje. Company’s business computerization stands for creating and installing an information system which would satisfy all company’s needs. Such system’s creatio...

COMMUNICATION AND INFORMATION SYSTEM MANAGEMENT INTERNATIONAL

Directory of Open Access Journals (Sweden)

Mircea Alexandru Răduţeanu

2012-01-01

Full Text Available In recent decades international management itself as a separate component of the general science of leadership, is an intercultural management. In this context of globalization, computerization, any business that wants have a modern management should have a structured information system based on communication, overall objective consisting in providing accurate data in real time all parties, increasing the level of communication. Given these considerations, we conducted this work trying to highlight the role of communication in achieving a modern, emphasizing international management features.The paper is divided into 6 parts, prefaced by an introduction of the paper we presented and completed within a set of conclusions on the effectiveness of communication. During the other paragraphs, we present the theoretical concepts of international management, communication, after which I stressed the role of information communication, managerial communication and will then focus on the process, taking stock of its specific stages in international management.

Improving CANDU plant operation and maintenance through retrofit information technology systems

International Nuclear Information System (INIS)

Lupton, L. R.; Judd, R. A.

1998-01-01

CANDU plant owners are facing an increasingly competitive environment for the generation of electricity. To meet this challenge, all owners have identified that information technology offers opportunities for significant improvements in CANDU operation, maintenance and administration (OM and A) costs. Targeted information technology application areas include instrumentation and control, engineering, construction, operations and plant information management. These opportunities also pose challenges and issues that must be addressed if the full benefits of the advances in information technology are to be achieved. Key among these are system hardware and software maintenance, and obsolescence protection. AECL has been supporting CANDU stations with the initial development and evaluation of systems to improve plant performance and cost. Five key initiatives that have been implemented or are in the process of being implemented in some CANDU plants to achieve cooperational benefits include: critical safety parameter monitor system; advanced computerized annunciation system; plant historical data system; plant display system; and digital protection system. Each system will be described in terms of its role in enhancing current CANDU plant performance and how they will contribute to future CANDU plant performance. (author). 8 refs., 3 figs

Robinson's computerized model of eye muscle mechanics revised.

NARCIS (Netherlands)

H.J. Simonsz (Huib)

1994-01-01

textabstractThe computerized model of static eye-muscle mechanics developed by Robinson was revised extensively and improved. An extensive literature study yielded additional information on the average diameter of the eye as related to age, on the average location of the insertions and origins of

Staging of bronchogenic carcinoma by computerized tomography

International Nuclear Information System (INIS)

Sommer, B.; Bauer, W.M.; Rath, M.; Fenzl, G.; Stelter, W.J.; Lissner, J.

1981-01-01

It was possible to check the information obtained by CT scanning in 36 patients out of 49 who had been subjected to computerized tomography, in respect of the extension of the primary tumour (T stage), and in 25 patients in respect of the degree of mediastinal lymphatic node involvement (N stage). In all 49 patients, the presence of bronchogenic carcinoma had been safely established. In 97% of the cases, assessment of the extension of the primary tumour was found to be correct. Assessment of the N stage, however, is more problematic, since detection of mediastinal lymphatic nodes by computerized tomography does not necessarily tell us something about their metastatic involvement. If all recognizable lymphatic nodes are interpreted as potential metastases, we have no false negative but 61% false positive results because of the frequency of postinflammatory or anthracotic lymphatic nodes. In case of exclusive assessment of lymphatic node enlargement above 1 cm diameter, the rate of metastatic nodes increases considerably (83%). Computerized tomography is definitely superior to all roentgenological methods in assessing the stage of a bronchogenic carcinoma; hence, it could occupy a key position in determining the diagnostic and therapeutic approach in patients with this disease. (orig.) [de

A computerized energy systems code and information library at Soreq

Energy Technology Data Exchange (ETDEWEB)

Silverman, I; Shapira, M; Caner, D; Sapier, D [Israel Atomic Energy Commission, Yavne (Israel). Soreq Nuclear Research Center

1996-12-01

In the framework of the contractual agreement between the Ministry of Energy and Infrastructure and the Division of Nuclear Engineering of the Israel Atomic Energy Commission, both Soreq-NRC and Ben-Gurion University have agreed to establish, in 1991, a code center. This code center contains a library of computer codes and relevant data, with particular emphasis on nuclear power plant research and development support. The code center maintains existing computer codes and adapts them to the ever changing computing environment, keeps track of new code developments in the field of nuclear engineering, and acquires the most recent revisions of computer codes of interest. An attempt is made to collect relevant codes developed in Israel and to assure that proper documentation and application instructions are available. En addition to computer programs, the code center collects sample problems and international benchmarks to verify the codes and their applications to various areas of interest to nuclear power plant engineering and safety evaluation. Recently, the reactor simulation group at Soreq acquired, using funds provided by the Ministry of Energy and Infrastructure, a PC work station operating under a Linux operating system to give users of the library an easy on-line way to access resources available at the library. These resources include the computer codes and their documentation, reports published by the reactor simulation group, and other information databases available at Soreq. Registered users set a communication line, through a modem, between their computer and the new workstation at Soreq and use it to download codes and/or information or to solve their problems, using codes from the library, on the computer at Soreq (authors).

A computerized energy systems code and information library at Soreq

International Nuclear Information System (INIS)

Silverman, I.; Shapira, M.; Caner, D.; Sapier, D.

1996-01-01

In the framework of the contractual agreement between the Ministry of Energy and Infrastructure and the Division of Nuclear Engineering of the Israel Atomic Energy Commission, both Soreq-NRC and Ben-Gurion University have agreed to establish, in 1991, a code center. This code center contains a library of computer codes and relevant data, with particular emphasis on nuclear power plant research and development support. The code center maintains existing computer codes and adapts them to the ever changing computing environment, keeps track of new code developments in the field of nuclear engineering, and acquires the most recent revisions of computer codes of interest. An attempt is made to collect relevant codes developed in Israel and to assure that proper documentation and application instructions are available. En addition to computer programs, the code center collects sample problems and international benchmarks to verify the codes and their applications to various areas of interest to nuclear power plant engineering and safety evaluation. Recently, the reactor simulation group at Soreq acquired, using funds provided by the Ministry of Energy and Infrastructure, a PC work station operating under a Linux operating system to give users of the library an easy on-line way to access resources available at the library. These resources include the computer codes and their documentation, reports published by the reactor simulation group, and other information databases available at Soreq. Registered users set a communication line, through a modem, between their computer and the new workstation at Soreq and use it to download codes and/or information or to solve their problems, using codes from the library, on the computer at Soreq (authors)

Implementing and operating the Hanford Environmental Information System (HEIS)

International Nuclear Information System (INIS)

Cowley, P.J.; Schwab, M.R.; Fox, R.D.

1994-03-01

In the process of performing environmental restoration at the 560-square mile Hanford Site in southeastern Washington State, vast amounts of scientific and technical data are being generated from sampling taking place all over the Site. This paper provides an overview of the lessons we have learned in designing, implementing, and putting into operation a computerized system named the Hanford Environmental Information System (HEIS), which is being used to manage the Site's environmental characterization sampling data. Topics discussed in this paper include helping the Site adapt to a data management culture, the advantages of electronic data over paper data, issues of data validation and defensibility, being a resource to the user community (including the regulatory community), managing and tracking data changes, integrating data from multiple programs, providing configuration control for data and software, getting priorities for software development, and developing a baseline for on-going funding to maintain the infrastructure for the information system

An introduction to the new Productivity Information Management System (PIMS)

Science.gov (United States)

Hull, R.

1982-01-01

The productivity information management system (PIMS), is described. The main objective of this computerized system is to enable management scientists to interactively explore data concerning DSN operations, maintenance and repairs, to develop and verify models for management planning. The PIMS will provide a powerful set of tools for iteratively manipulating data sets in a wide variety of ways. The initial version of PIMS will be a small scale pilot system. The following topics are discussed: (1) the motivation for developing PIMS; (2) various data sets which will be integrated by PIMS; (3) overall design of PIMS; and (4) how PIMS will be used. A survey of relevant databases concerning DSN operations at Goldstone is also included.

Transformations and algorithms in a computerized brain atlas

International Nuclear Information System (INIS)

Thurfjell, L.; Bohm, C.; Eriksson, L.; Karolinska Institute/Hospital, Stockholm

1993-01-01

The computerized brain atlas constructed at the Karolinska Hospital, Stockholm, Sweden, has been further developed. This atlas was designed to be employed in different fields of neuro imaging such as positron emission tomography (PET), single photon emission tomography (SPECT), computerized tomography (CT) and magnetic resonance imaging (MR). The main objectives with the atlas is to aid the interpretation of functional images by introducing anatomical information, to serve as a tool in the merging of data from different imaging modalities and to facilitate the comparisons of data from different individuals by allowing for anatomical standardization of individual data. The purpose of this paper is to describe the algorithms and transformations used in the implementation of the atlas software

Pain Perception: Computerized versus Traditional Local Anesthesia in Pediatric Patients.

Science.gov (United States)

Mittal, M; Kumar, A; Srivastava, D; Sharma, P; Sharma, S

2015-01-01

Local anesthetic injection is one of the most anxiety- provoking procedure for both children and adult patients in dentistry. A computerized system for slow delivery of local anesthetic has been developed as a possible solution to reduce the pain related to the local anesthetic injection. The present study was conducted to evaluate and compare pain perception rates in pediatric patients with computerized system and traditional methods, both objectively and subjectively. It was a randomized controlled study in one hundred children aged 8-12 years in healthy physical and mental state, assessed as being cooperative, requiring extraction of maxillary primary molars. Children were divided into two groups by random sampling - Group A received buccal and palatal infiltration injection using Wand, while Group B received buccal and palatal infiltration using traditional syringe. Visual Analog scale (VAS) was used for subjective evaluation of pain perception by patient. Sound, Eye, Motor (SEM) scale was used as an objective method where sound, eye and motor reactions of patient were observed and heart rate measurement using pulse oximeter was used as the physiological parameter for objective evaluation. Patients experienced significantly less pain of injection with the computerized method during palatal infiltration, while less pain was not statistically significant during buccal infiltration. Heart rate increased during both buccal and palatal infiltration in traditional and computerized local anesthesia, but difference between traditional and computerized method was not statistically significant. It was concluded that pain perception was significantly more during traditional palatal infiltration injection as compared to computerized palatal infiltration, while there was no difference in pain perception during buccal infiltration in both the groups.

Computerized analysis of fetal heart rate variability signal during the stages of labor.

Science.gov (United States)

Annunziata, Maria Laura; Tagliaferri, Salvatore; Esposito, Francesca Giovanna; Giuliano, Natascia; Mereghini, Flavia; Di Lieto, Andrea; Campanile, Marta

2016-03-01

To analyze computerized cardiotocographic (cCTG) parameters (baseline fetal heart rate, baseline FHR; short term variability, STV; approximate entropy, ApEn; low frequency, LF; movement frequency, MF; high frequency, HF) in physiological pregnancy in order to correlate them with the stages of labor. This could provide more information for understanding the mechanisms of nervous system control of FHR during labor progression. A total of 534 pregnant women were monitored on cCTG from the 37th week before the onset of spontaneous labor and during the first and the second stage of labor. Statistical analysis was performed using Kruskal-Wallis test and Wilcoxon rank-sum test with the Bonferroni adjusted α (labor, and the first and second stages of labor. Differences between some of the stages were found for ApEn, LF and for LF/(HF + MF), where the first and the third were reduced and the second was increased. cCTG modifications during labor may reflect the physiologic increased activation of the autonomous nervous system. Using computerized fetal heart rate analysis during labor it may be possible to obtain more information from the fetal cardiac signal, in comparison with the traditional tracing. © 2016 Japan Society of Obstetrics and Gynecology.

Nuclear Computerized Library for Assessing Reactor Risk (NUCLARR)

International Nuclear Information System (INIS)

Gilmore, W.E.; Blackman, H.S.; Ryan, T.G.

1986-01-01

The Nuclear Computerized Library for Assessing Reactor Risk (NUCLARR) program is a multiyear effort sponsored by the NRC and is being conducted at the Idaho National Engineering Laboratory (INEL). The goal of this program is to establish and operate computerized data base management tools for the human reliability data bank specification developed by Comer and Donovan. The NRC and the risk analysis community recognized that implementing a fully functional library would not be feasible, or practical, without the aid of computerized tools for management and manipulation of its data sources. The end users of the NUCLARR can be classified into three categories according to specific needs. The first category is those users interested in reviewing individual data sources for a given situation. The second category of users selects multiple data sources for a specific case, summarizing the information, and performing comparative studies. The last category of users interfaces the NUCLARR with other programming applications, such as other data banks, and simulation models of risk assessment. Project status is provided in the paper

Computerizing Maintenance Management Improves School Processes.

Science.gov (United States)

Conroy, Pat

2002-01-01

Describes how a Computerized Maintenance Management System (CMMS), a centralized maintenance operations database that facilitates work order procedures and staff directives, can help individual school campuses and school districts to manage maintenance. Presents the benefits of CMMS and things to consider in CMMS selection. (EV)

Computerized tomography in the examination of the orbit

International Nuclear Information System (INIS)

Ammerich, H.; Wackenheim, A.; Golabek, R.

1980-01-01

The importance of computerized tomography in the ophtalmological diagnosis is discussed. A great value of the information obtained by this not cumbersome method is stressed. The findings achieved this method in the most frequent diseases of the eyeball, orbit and neighbouring anatomical structures are described. (author)

Assessment of Minimal HE (with emphasis on computerized psychometric tests)

Science.gov (United States)

Kappus, Matthew R; Bajaj, Jasmohan S

2012-01-01

Synopsis Minimal hepatic encephalopathy (MHE) is associated with a high risk of development of overt hepatic encephalopathy, impaired quality of life and driving accidents. The detection of MHE requires specialized testing since it cannot by definition, be diagnosed on standard clinical examination. Psychometric (paper-pencil or computerized or a combination) and neuro-physiological techniques are often used to test for MHE. Paper-pencil psychometric batteries like the Psychometric Hepatic Encephalopathy Score (PHES) have been validated in several countries but do not have US normative values. Computerized tests such as the inhibitory control test (ICT), cognitive drug research system and Scan test have proven useful to diagnose MHE and predict outcomes. The specificity and sensitivity of these tests are similar to the recommended gold standards. Neuro-physiological tests such as the EEG and its interpretations, evoked potentials and Critical Flicker Frequency (CFF) also provide useful information. The diagnosis of MHE is an important issue for clinicians and patients alike and the testing strategies depend on the normative data available, patient comfort and local expertise. PMID:22321464

Computerized plant maintenance management

International Nuclear Information System (INIS)

Kozusko, A.M.

1986-01-01

The evolution of the computer has and continues to have a great impact on industry. We are in an adjustment cycle with the current computer evolution, and will need to adapt to make the changes for the coming decade. Hardware and software are continually being enhanced. Computers are becoming more powerful and will eventually provide an effective man-machine interface. This paper shares experiences encountered during implementations of computerized maintenance systems

Computerizing primary schools in rural kenya

DEFF Research Database (Denmark)

Ogembo, J.G.; Ngugi, B.; Pelowski, Matthew John

2012-01-01

questions surrounding this endeavour. Specifically: 1.) what problems do rural schools actually want to solve with computerization; 2.) is computerization the most important priority for rural schools; 3.) are schools ready, in terms of infrastructure, for a computer in the classroom; or 4.) might...... and protective roofing -posing severe challenges to the outstanding conception of computerization. We consider these results and make recommendations for better adapting programs for computer introduction, and also suggest the use of new innovative devices, such as cell phones, which might already have overcome......This paper investigates the outstanding challenges facing primary schools' computerization in rural Kenya. Computerization of schools is often envisaged as a 'magic', or at least a particularly efficient, solution to many of the problems that developing countries face in improving primary school...

Registration of an enterprise information system development by formal specifications

Directory of Open Access Journals (Sweden)

Milan Mišovič

2006-01-01

Full Text Available The economical view from the Enterprise process sets ERP, SCM, CRM, BI, … to a functionality and Enterprise Information System structure by informaticians is demonstrable reality. A comprehensive Enterprise Information System software solution, that respects the mentioned economical platform by large software firms, has got required attributes of a data, process and communication integrity but there is not financially sustainable for small enterprises. These enterprises are predominantly oriented to progressive computerization of enterprise processes and rather gradually buy application packages for individual process sets. Large and small software firms provide needed partial solutions, nevertheless small firms solutions are connected with the data, process and communication disintegration. Since the compatibility requirement is not generally accepted, finding of an EAI solution have become one of the main System Integration tasks. This article provides one specific style for a complex or partial Enterprise Information System solution. This solution is founded on formal and descriptive specifications that can sustain required data, process and communication integration among packages of applications. As a result, this style provides the new view for the effectiveness of the associated process of information modeling.

Information management system for design, construction and operation of nuclear power plants

International Nuclear Information System (INIS)

Bolch, M.C.; Jones, C.R.

1990-01-01

This paper describes the principal requirements and features of a computerized information management system (IMS) believed to be a necessary part of the program to design, build and operate the next generation of nuclear power plants in the United States. This way a result of extensive review and input from an industry group studying future nuclear power plant construction improvements. The needs of the power plant constructor, owner and operator for such a computerized technical data base are described in terms of applications and scope and timing of turnover of the IMS by the plant designer. The applications cover the full life cycle of the plant including project control, construction activities, quality control, maintenance and operation. The scope of the IMS is also described in terms of the technical data to be included, hardware and software capabilities and training. The responsibilities of the plant designer for developing the IMS and generating the technical data base is defined as part of the plant process. The requirements to be met include a comprehensive plant data model and computer system hardware and software

Information management system for design, construction and operation of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Bolch, M.C. (Duke Power Co. (US)); Jones, C.R. (S. Levy Inc. (US))

1990-01-01

This paper describes the principal requirements and features of a computerized information management system (IMS) believed to be a necessary part of the program to design, build and operate the next generation of nuclear power plants in the United States. This way a result of extensive review and input from an industry group studying future nuclear power plant construction improvements. The needs of the power plant constructor, owner and operator for such a computerized technical data base are described in terms of applications and scope and timing of turnover of the IMS by the plant designer. The applications cover the full life cycle of the plant including project control, construction activities, quality control, maintenance and operation. The scope of the IMS is also described in terms of the technical data to be included, hardware and software capabilities and training. The responsibilities of the plant designer for developing the IMS and generating the technical data base is defined as part of the plant process. The requirements to be met include a comprehensive plant data model and computer system hardware and software.

A novel computerized surgeon-machine interface for robot-assisted laser phonomicrosurgery.

Science.gov (United States)

Mattos, Leonardo S; Deshpande, Nikhil; Barresi, Giacinto; Guastini, Luca; Peretti, Giorgio

2014-08-01

To introduce a novel computerized surgical system for improved usability, intuitiveness, accuracy, and controllability in robot-assisted laser phonomicrosurgery. Pilot technology assessment. The novel system was developed involving a newly designed motorized laser micromanipulator, a touch-screen display, and a graphics stylus. The system allows the control of a CO2 laser through interaction between the stylus and the live video of the surgical area. This empowers the stylus with the ability to have actual effect on the surgical site. Surgical enhancements afforded by this system were established through a pilot technology assessment using randomized trials comparing its performance with a state-of-the-art laser microsurgery system. Resident surgeons and medical students were chosen as subjects in performing sets of trajectory-following exercises. Image processing-based techniques were used for an objective performance assessment. A System Usability Scale-based questionnaire was used for the qualitative assessment. The computerized interface demonstrated superiority in usability, accuracy, and controllability over the state-of-the-art system. Significant ease of use and learning experienced by the subjects were demonstrated by the usability score assigned to the two compared interfaces: computerized interface = 83.96% versus state-of-the-art = 68.02%. The objective analysis showed a significant enhancement in accuracy and controllability: computerized interface = 90.02% versus state-of-the-art = 75.59%. The novel system significantly enhances the accuracy, usability, and controllability in laser phonomicrosurgery. The design provides an opportunity to improve the ergonomics and safety of current surgical setups. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Some procedures for computerized ability testing

NARCIS (Netherlands)

van der Linden, Willem J.; Zwarts, Michel A.

1989-01-01

For computerized test systems to be operational, the use of item response theory is a prerequisite. As opposed to classical test theory, in item response models the abilities of the examinees and the properties of the items are parameterized separately. Hence, when measuring the abilities of

Computerized accident management support system: development for severe accident management

International Nuclear Information System (INIS)

Garcia, V.; Saiz, J.; Gomez, C.

1998-01-01

The activities involved in the international Halden Reactor Project (HRP), sponsored by the OECD, include the development of a Computerized Accident Management Support System (CAMS). The system was initially designed for its operation under normal conditions, operational transients and non severe accidents. Its purpose is to detect the plant status, analyzing the future evolution of the sequence (initially using the APROS simulation code) and the possible recovery and mitigation actions in case of an accident occurs. In order to widen the scope of CAMS to severe accident management issues, the integration of the MAAP code in the system has been proposed, as the contribution of the Spanish Electrical Sector to the project (with the coordination of DTN). To include this new capacity in CAMS is necessary to modify the system structure, including two new modules (Diagnosis and Adjustment). These modules are being developed currently for Pressurized Water Reactors and Boiling Water REactors, by the engineering of UNION FENOSA and IBERDROLA companies (respectively). This motion presents the characteristics of the new structure of the CAMS, as well as the general characteristics of the modules, developed by these companies in the framework of the Halden Reactor Project. (Author)

Computerization of nuclear material accounting and control at storage facilities of RT-1 plant, PA Mayak

International Nuclear Information System (INIS)

Krakhmal'nik, V.I.; Menshchikov, Yu.L.; Mozhaev, D.A.

1999-01-01

Computerized system for nuclear material (NM) accounting and control at RT-1 plant is being created on the basis of advanced engineering and programming tools, which give a possibility to ensure prompt access to the information required, to unify the accounting and report documentation, make statistical processing of the data, and trace the NM transfers in the chain of its storage at facilities of RT-1 plant. Currently, the accounting is performed in parallel, both by the old methods and with computerized system. The following functions are performed by the system at the current stage: input of data on the end product's (plutonium dioxide) quantitative and qualitative composition; data input on the localization of containers with finished products at storage facilities of the plant and the product's temporary characteristics; selective verification of the data on containers and batches, according to the criteria prespecified by the user; data protection against unauthorized access; data archiving; report documents formation and providing [ru

Development of a computerized system for performance monitoring and diagnostics in nuclear power plants

International Nuclear Information System (INIS)

Chou, G.H.; Chao, H.J.

1995-01-01

An on-line computerized system for thermal performance monitoring and diagnostics has been developed at the Institute of Nuclear Energy Research (INER). It was the product of the ChinShan plant performance Monitoring, Analysis and Diagnostics Expert System (CS-MADES) project sponsored by Taiwan Power Company (TPC). The system can carry out turbine performance monitoring and analysis during normal operation, and yield diagnostic results of component degradation after finding out the missing generation problems. Three subsystems were generated to support the whole system framework. They are Test Data Processing Subsystem (TDPS), On-line Monitoring and Analysis Subsystem (OMAS), and Thermal Performance Diagnostics Expert System (TPDES). Some visible benefits have been gained so far through the prototype system installed at the Chinshan nuclear power station

DOE transporation programs - computerized techniques

Energy Technology Data Exchange (ETDEWEB)

Joy, D.S.; Johnson, P.E.; Fore, C.S.; Peterson, B.E.

1983-01-01

One of the major thrusts of the transportation programs at the Oak Ridge National Laboratory has been the development of a number of computerized transportation programs and data bases. The U.S. Department of Energy (DOE) is supporting these efforts through the Transportation Technology Center at Sandia National Laboratories and the Tranportation Operations and Traffic Management (TOTM) organization at DOE Headquarters. Initially this project was centered upon research activities. However, since these tools provide traffic managers and key personnel involved in preshipment planning with a unique resource for ensuring that the movement of radioactive materials can be properly accomplished, additional interest and support is coming from the operational side of DOE. The major accomplishments include the development of two routing models (one for rail shipments and the other for highway shipments), an emergency response assistance program, and two data bases containing pertinent legislative and regulatory information. This paper discusses the mose recent advances in, and additions to, these computerized techniques and provides examples of how they are used.

Computerized materials protection, control, and accountability at the Institute of Physics and Power Engineering

International Nuclear Information System (INIS)

Efimenko, V.; Goryunov, V.; Ilyantsev, A.

1998-01-01

As part of a multifaceted approach to protecting its nuclear materials, The Institute of Physics and Power Engineering (IPPE) at Obninsk, Russia, has been computerizing its materials protection, control, and accountability capabilities. This is being accomplished in collaboration with the CoreMAS team at Los Alamos National Laboratory. Such international cooperation in applying advanced science and technology to managing and controlling nuclear materials will help reduce the threat of nuclear weapons proliferation by preventing acquisition of weapons-grade nuclear materials by unauthorized individuals, organizations, or states. One important characteristic of IPPE is that it encompasses several facilities that manage nuclear materials, and three of these facilities already operate their own independent (or independently developed) computerized accounting systems. This paper focuses on the importance of compatibility between the computerized accountability systems at the facilities, the ability of the individual systems to communicate with a single site-wide system, and the necessity of coordination between facilities in designing and developing computerized systems. The authors believe that the lessons learned at IPPE in coordinating these efforts have wide-ranging significance for other sites with multiple facilities

Computerized Adaptive Test vs. decision trees: Development of a support decision system to identify suicidal behavior.

Science.gov (United States)

Delgado-Gomez, D; Baca-Garcia, E; Aguado, D; Courtet, P; Lopez-Castroman, J

2016-12-01

Several Computerized Adaptive Tests (CATs) have been proposed to facilitate assessments in mental health. These tests are built in a standard way, disregarding useful and usually available information not included in the assessment scales that could increase the precision and utility of CATs, such as the history of suicide attempts. Using the items of a previously developed scale for suicidal risk, we compared the performance of a standard CAT and a decision tree in a support decision system to identify suicidal behavior. We included the history of past suicide attempts as a class for the separation of patients in the decision tree. The decision tree needed an average of four items to achieve a similar accuracy than a standard CAT with nine items. The accuracy of the decision tree, obtained after 25 cross-validations, was 81.4%. A shortened test adapted for the separation of suicidal and non-suicidal patients was developed. CATs can be very useful tools for the assessment of suicidal risk. However, standard CATs do not use all the information that is available. A decision tree can improve the precision of the assessment since they are constructed using a priori information. Copyright © 2016 Elsevier B.V. All rights reserved.

Feasibility analysis of CNP 1000 computerized I and C system design objectives

International Nuclear Information System (INIS)

Zhang Mingguang; Xu Jijun; Zhang Qinshen

2000-01-01

The author states the design objectives of the computerized I and C (CIC) system and advanced main control room (AMCR), which could and should be achieved in CNP 1000, based on the national 1E computer production technology including software and hardware, and current instrumentation and control design technique of nuclear power plant. The feasibility analysis on the design objectives and the reasons or necessity to do the design research projects have been described. The objectives of design research on CIC and AMCR as well as the self-design proficiency after the design research have been given

Computerized engineering logic for procurement and dedication processes

International Nuclear Information System (INIS)

Tulay, M.P.

1996-01-01

This paper summarizes the work performed for designing the system and especially for calculating on-line expected performance and gives some significant results. In an attempt to better meet the needs of operations and maintenance organizations, many nuclear utility procurement engineering groups have simplified their procedures, developed on-line tools for performing the specification of replacement items, and developed relational databases containing part-level information necessary to automate the procurement process. Although these improvements have helped to reduce the engineering necessary to properly specify and accept/dedicate items for nuclear safety-related applications, a number of utilities have recognized that additional long-term savings can be realized by integrating a computerized logic to assist technical procurement engineering personnel

Geometrical efficiency in computerized tomography: generalized model

International Nuclear Information System (INIS)

Costa, P.R.; Robilotta, C.C.

1992-01-01

A simplified model for producing sensitivity and exposure profiles in computerized tomographic system was recently developed allowing the forecast of profiles behaviour in the rotation center of the system. The generalization of this model for some point of the image plane was described, and the geometrical efficiency could be evaluated. (C.G.C.)

Studies and research concerning BNFP: computerized nuclear materials control and accounting system development evaluation report, FY 1978

Energy Technology Data Exchange (ETDEWEB)

Crawford, J M; Ehinger, M H; Joseph, C; Madeen, M L

1978-10-01

Development work on a computerized system for nuclear materials control and accounting in a nuclear fuel reprocessing plant is described and evaluated. Hardware and software were installed and tested to demonstrate key measurement, measurement control, and accounting requirements at accountability input/output points using natural uranium. The demonstration included a remote data acquisition system which interfaces process and special instrumentation to a cenral processing unit.

INFORMATION – A VALUABLE ELEMENT IN THE MANAGEMENT SYSTEM OF THE MARKET ECONOMY

Directory of Open Access Journals (Sweden)

Ion SARBU

2015-12-01

Full Text Available News. The globalization process has been accelerated by the explosion of information technologies entering into the work of social, production and education enterprises. Thus, in terms of systemic approach, the company is not a production of goods or services tailored to market requirements, but is equally an information unit producing knowledge. Purpose. The fundamental feature of these processes is applied once that the primary element of information processing is generated always in the information system, the information processed and interpreted in its final form as a resource of the management system. Methods. The article exposed the theoretical and methodological organization of information system of market relations and the role of information as a valuable element of business processes. Results. In the modern knowledge-based economy, increasing information needs at all levels of economic units that generate the emergence of new information products, enhancement of the productive resource and service information and transporting it by modern computerized channels.Information as a productive resource and service as the raw material for creating an active instrument of scientific management and virtual education in Moldova.

Presentation and information management server PRIMAS

International Nuclear Information System (INIS)

Gibbert, R.

1998-01-01

An advanced computerized information system, PRIMAS, is presented. Its tasks include legal demands by the Federal government and the EU, environmental data model solutions, multi-sectorial analysis etc. Its structure, an open system architecture makes possible to be integrated and connected to existing standard systems. Its main use is the provision and processing of environmental information. (R.P.)

Is the ICU staff satisfied with the computerized physician order entry? A cross-sectional survey study

Science.gov (United States)

Fumis, Renata Rego Lins; Costa, Eduardo Leite Vieira; Martins, Paulo Sergio; Pizzo, Vladimir; Souza, Ivens Augusto; Schettino, Guilherme de Paula Pinto

2014-01-01

Objective To evaluate the satisfaction of the intensive care unit staff with a computerized physician order entry and to compare the concept of the computerized physician order entry relevance among intensive care unit healthcare workers. Methods We performed a cross-sectional survey to assess the satisfaction of the intensive care unit staff with the computerized physician order entry in a 30-bed medical/surgical adult intensive care unit using a self-administered questionnaire. The questions used for grading satisfaction levels were answered according to a numerical scale that ranged from 1 point (low satisfaction) to 10 points (high satisfaction). Results The majority of the respondents (n=250) were female (66%) between the ages of 30 and 35 years of age (69%). The overall satisfaction with the computerized physician order entry scored 5.74±2.14 points. The satisfaction was lower among physicians (n=42) than among nurses, nurse technicians, respiratory therapists, clinical pharmacists and diet specialists (4.62±1.79 versus 5.97±2.14, pdigitalization decreased the workload and contributed to the intensive care unit quality with a user-friendly and accurate system and that digitalization provided concise information within a reasonable time frame. PMID:24770682

Computerized flow monitors detect small kicks

Energy Technology Data Exchange (ETDEWEB)

McCann, D.; White, D. (Sedco Forex, Paris (FR))

1992-02-24

This paper reports on a smart alarm system installed on a number of offshore rigs and one land rig which can detect kicks more quickly than conventional systems. This rapid kick detection improves rig safety because the smaller the detected influx, the easier it is to control the well. The extensive computerized monitoring system helps drilling personnel detect fluid influxes and fluid losses before the changes in flow would normally be apparent.

State Token Petri Net modeling method for formal verification of computerized procedure including operator's interruptions of procedure execution flow

International Nuclear Information System (INIS)

Kim, Yun Goo; Seong, Poong Hyun

2012-01-01

The Computerized Procedure System (CPS) is one of the primary operating support systems in the digital Main Control Room. The CPS displays procedure on the computer screen in the form of a flow chart, and displays plant operating information along with procedure instructions. It also supports operator decision making by providing a system decision. A procedure flow should be correct and reliable, as an error would lead to operator misjudgement and inadequate control. In this paper we present a modeling for the CPS that enables formal verification based on Petri nets. The proposed State Token Petri Nets (STPN) also support modeling of a procedure flow that has various interruptions by the operator, according to the plant condition. STPN modeling is compared with Coloured Petri net when they are applied to Emergency Operating Computerized Procedure. A converting program for Computerized Procedure (CP) to STPN has been also developed. The formal verification and validation methods of CP with STPN increase the safety of a nuclear power plant and provide digital quality assurance means that are needed when the role and function of the CPS is increasing.

Development of a computerized nuclear materials control and accounting system for a fuel reprocessing plant

International Nuclear Information System (INIS)

Crawford, J.M.; Ehinger, M.H.; Joseph, C.; Madeen, M.L.

1979-07-01

A computerized nuclear materials control and accounting system (CNMCAS) for a fuel reprocessing plant is being developed by Allied-General Nuclear Services at the Barnwell Nuclear Fuel Plant. Development work includes on-line demonstration of near real-time measurement, measurement control, accounting, and processing monitoring/process surveillance activities during test process runs using natural uranium. A technique for estimating in-process inventory is also being developed. This paper describes development work performed and planned, plus significant design features required to integrate CNMCAS into an advanced safeguards system

A modified conjugate gradient method based on the Tikhonov system for computerized tomography (CT).

Science.gov (United States)

Wang, Qi; Wang, Huaxiang

2011-04-01

During the past few decades, computerized tomography (CT) was widely used for non-destructive testing (NDT) and non-destructive examination (NDE) in the industrial area because of its characteristics of non-invasiveness and visibility. Recently, CT technology has been applied to multi-phase flow measurement. Using the principle of radiation attenuation measurements along different directions through the investigated object with a special reconstruction algorithm, cross-sectional information of the scanned object can be worked out. It is a typical inverse problem and has always been a challenge for its nonlinearity and ill-conditions. The Tikhonov regulation method is widely used for similar ill-posed problems. However, the conventional Tikhonov method does not provide reconstructions with qualities good enough, the relative errors between the reconstructed images and the real distribution should be further reduced. In this paper, a modified conjugate gradient (CG) method is applied to a Tikhonov system (MCGT method) for reconstructing CT images. The computational load is dominated by the number of independent measurements m, and a preconditioner is imported to lower the condition number of the Tikhonov system. Both simulation and experiment results indicate that the proposed method can reduce the computational time and improve the quality of image reconstruction. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.

The Extent of computerization in big companies of the Spanish hotel sector

OpenAIRE

Infante Moro, Alfonso; Martínez López, Francisco José; Infante Moro, Juan Carlos

2015-01-01

This is the first study of the hotel sector regarding the extent of computerization in its big companies. This study examines the extent of computerization in big companies of the Spanish hotel sector with the aim of confirming the viability and sustainability of this sector relative to changes in ICT, a stage which is defined by the extensive use of the Internet and online social networks, and the handling of large quantities of information generated within these new env...

AUTOMATIC ESTIMATION OF SIZE PARAMETERS USING VERIFIED COMPUTERIZED STEREOANALYSIS

Directory of Open Access Journals (Sweden)

Peter R Mouton

2011-05-01

Full Text Available State-of-the-art computerized stereology systems combine high-resolution video microscopy and hardwaresoftware integration with stereological methods to assist users in quantifying multidimensional parameters of importance to biomedical research, including volume, surface area, length, number, their variation and spatial distribution. The requirement for constant interactions between a trained, non-expert user and the targeted features of interest currently limits the throughput efficiency of these systems. To address this issue we developed a novel approach for automatic stereological analysis of 2-D images, Verified Computerized Stereoanalysis (VCS. The VCS approach minimizes the need for user interactions with high contrast [high signal-to-noise ratio (S:N] biological objects of interest. Performance testing of the VCS approach confirmed dramatic increases in the efficiency of total object volume (size estimation, without a loss of accuracy or precision compared to conventional computerized stereology. The broad application of high efficiency VCS to high-contrast biological objects on tissue sections could reduce labor costs, enhance hypothesis testing, and accelerate the progress of biomedical research focused on improvements in health and the management of disease.

The Computerized Reference Department: Buying the Future.

Science.gov (United States)

Kriz, Harry M.; Kok, Victoria T.

1985-01-01

Basis for systematic computerization of academic research library's reference, collection development, and collection management functions emphasizes productivity enhancement for librarians and support staff. Use of microcomputer and university's mainframe computer to develop applications of database management systems, electronic spreadsheets,…

Development of computerized dose planning system and applicator for high dose rate remote afterloading irradiation

Energy Technology Data Exchange (ETDEWEB)

Choi, T. J. [Keimyung Univ., Taegu (Korea); Kim, S. W. [Fatima Hospital, Taegu (Korea); Kim, O. B.; Lee, H. J.; Won, C. H. [Keimyung Univ., Taegu (Korea); Yoon, S. M. [Dong-a Univ., Pusan (Korea)

2000-04-01

To design and fabricate of the high dose rate source and applicators which are tandem, ovoids and colpostat for OB/Gyn brachytherapy includes the computerized dose planning system. Designed the high dose rate Ir-192 source with nuclide atomic power irradiation and investigated the dose characteristics of fabricated brachysource. We performed the effect of self-absorption and determining the gamma constant and output factor and determined the apparent activity of designed source. he automated computer planning system provided the 2D distribution and 3D includes analysis programs. Created the high dose rate source Ir-192, 10 Ci(370GBq). The effective attenuation factor from the self-absorption and source wall was examined to 0.55 of the activity of bare source and this factor is useful for determination of the apparent activity and gamma constant 4.69 Rcm{sup 2}/mCi-hr. Fabricated the colpostat was investigated the dose distributions of frontal, axial and sagittal plane in intra-cavitary radiation therapy for cervical cancer. The reduce dose at bladder and rectum area was found about 20 % of original dose. The computerized brachytherapy planning system provides the 2-dimensional isodose and 3-D include the dose-volume histogram(DVH) with graphic-user-interface mode. emoted afterloading device was built for experiment of created Ir-192 source with film dosimetry within {+-}1 mm discrepancy. 34 refs., 25 figs., 11 tabs. (Author)

Analysis of methods. [information systems evolution environment

Science.gov (United States)

Mayer, Richard J. (Editor); Ackley, Keith A.; Wells, M. Sue; Mayer, Paula S. D.; Blinn, Thomas M.; Decker, Louis P.; Toland, Joel A.; Crump, J. Wesley; Menzel, Christopher P.; Bodenmiller, Charles A.

1991-01-01

Information is one of an organization's most important assets. For this reason the development and maintenance of an integrated information system environment is one of the most important functions within a large organization. The Integrated Information Systems Evolution Environment (IISEE) project has as one of its primary goals a computerized solution to the difficulties involved in the development of integrated information systems. To develop such an environment a thorough understanding of the enterprise's information needs and requirements is of paramount importance. This document is the current release of the research performed by the Integrated Development Support Environment (IDSE) Research Team in support of the IISEE project. Research indicates that an integral part of any information system environment would be multiple modeling methods to support the management of the organization's information. Automated tool support for these methods is necessary to facilitate their use in an integrated environment. An integrated environment makes it necessary to maintain an integrated database which contains the different kinds of models developed under the various methodologies. In addition, to speed the process of development of models, a procedure or technique is needed to allow automatic translation from one methodology's representation to another while maintaining the integrity of both. The purpose for the analysis of the modeling methods included in this document is to examine these methods with the goal being to include them in an integrated development support environment. To accomplish this and to develop a method for allowing intra-methodology and inter-methodology model element reuse, a thorough understanding of multiple modeling methodologies is necessary. Currently the IDSE Research Team is investigating the family of Integrated Computer Aided Manufacturing (ICAM) DEFinition (IDEF) languages IDEF(0), IDEF(1), and IDEF(1x), as well as ENALIM, Entity

Computerization of administration and operation management in Polish black coal mines

Energy Technology Data Exchange (ETDEWEB)

Mastej, R.; Syrkiewicz, J. (Centralny Osrodek Informatyki Gornictwa (Poland))

1990-08-01

Characterizes main solutions of the computerized management model adopted in Poland for the mining industry and the technical and oganizational structure of computer system application. Computer systems for black coal mines and the range of microprocessor application are shown in block diagrams. The COIG mining information center makes about 45 computer system modules with independent implementation available for black coal mines. The general concept foresees central data processing in the COIG center on the ODRA 1305 and ICL 297 computers with the G-3 operating system in the first stage and an ICL series 39 computer with the VME operating system in the second stage. For mines where no transmission lines are available local solutions based on smaller ICL computers, minicomputers or computer networks with the NOVELL network operating system or multi-access systems with the UNIX operating system are planned. 3 refs.

Computerized effluent control and evaluation of environmental impact for an industrial plant

International Nuclear Information System (INIS)

Martinez de Angulo, L.F.; Garcia Gutierrez, M.S.

1993-01-01

Growing public interest and concern for the environment is translated at official level into regulatory standards to limit, control and evaluate the environmental impact produced by polluting facilities. This paper seeks to demonstrate the convenience of automatizing all these computerized systems. This philosophy has been put into practice to computerize processes in the industry with the most complex standards: the nuclear industry. The application used has the capacity to store and manage data on all the discharges, evaluate the effect produced by them and generate information to be sent periodically to the competent authority. The conceptual definition of the application can be adapted to any industrial or public utility facility releasing polluting effluents which must undergo control, monitoring and analysis of the environmental impact by the relevant regulatory body, bearing in mind the environmental standard applicable to the category of the facility and the type of polluting substance released. The application can be run interactively in a personal computer on the basis of menus and screens, under a relational Data Base Management System (DBMS). Its implementation is independent of the DBMS used and the hardware with supports it. (author)

Development of a computerized nuclear materials control and accounting system for a fuel reprocessing plant

International Nuclear Information System (INIS)

Crawford, J.M.; Ehinger, M.H.; Joseph, C.; Madeen, M.L.

1979-01-01

A computerized nuclear materials control and accounting system (CNMCAS) for a fuel reprocessing plant is being developed by Allied-General Nuclear Services at the Barnwell Nuclear Fuel Plant. Development work includes on-line demonstration of near real-time measurement, measurement control, accounting, and processing monitoring/process surveillance activities during test process runs using natural uranium. A technique for estimating in-process inventory is also being developed. This paper describes development work performed and planned, plus significant design features required to integrate CNMCAS into an advanced safeguards system. 2 refs

A Petri Net-Based Software Process Model for Developing Process-Oriented Information Systems

Science.gov (United States)

Li, Yu; Oberweis, Andreas

Aiming at increasing flexibility, efficiency, effectiveness, and transparency of information processing and resource deployment in organizations to ensure customer satisfaction and high quality of products and services, process-oriented information systems (POIS) represent a promising realization form of computerized business information systems. Due to the complexity of POIS, explicit and specialized software process models are required to guide POIS development. In this chapter we characterize POIS with an architecture framework and present a Petri net-based software process model tailored for POIS development with consideration of organizational roles. As integrated parts of the software process model, we also introduce XML nets, a variant of high-level Petri nets as basic methodology for business processes modeling, and an XML net-based software toolset providing comprehensive functionalities for POIS development.

Mixed results in the safety performance of computerized physician order entry.

Science.gov (United States)

Metzger, Jane; Welebob, Emily; Bates, David W; Lipsitz, Stuart; Classen, David C

2010-04-01

Computerized physician order entry is a required feature for hospitals seeking to demonstrate meaningful use of electronic medical record systems and qualify for federal financial incentives. A national sample of sixty-two hospitals voluntarily used a simulation tool designed to assess how well safety decision support worked when applied to medication orders in computerized order entry. The simulation detected only 53 percent of the medication orders that would have resulted in fatalities and 10-82 percent of the test orders that would have caused serious adverse drug events. It is important to ascertain whether actual implementations of computerized physician order entry are achieving goals such as improved patient safety.

Unintended Transformations of Clinical Relations with a Computerized Physician Order Entry System

DEFF Research Database (Denmark)

Wentzer, Helle; Böttger, Ulrich; Boye, Niels

2007-01-01

A socio-technical approach was used to study the qualitative effects of deploying a medication CPOE (Computerized Physician Order Entry System with no decision support) at two internal medical wards in a hospital in Denmark. Our results show spatial and temporal transformations of core acts...... and relations in medication work, i.e. of the intended use of the system inscribed in hardware and software, in the relations of care between doctors and patients, of collaboration between doctors and nurses, and prospectively of the patients’ trajectories when readmitted to hospital or another health care...... or ‘doing medication’. The paper argues for the project organization to support the local collaboration and renegotiation of time and place of enacting medication with CPOE, as well as set up feedback for maturation of the software for future clinical use....

Computerized dosimetric system for studying radiation fields of afterloading apparatus

International Nuclear Information System (INIS)

Andryushin, O.S.; Gorshkov, M.I.

1988-01-01

Works on designing a computerized dosimetric scanner (CODOS) for studying radiation fields of remote therapeutic apparatus, providing dosimetric data input from semiconductor transducers and ionization chambers directly into the computer memory were carried out. The basic problems were to provide reproducibility and accuracy of the initial dosimetric data, formation of the data bank on LUEhV-15M1 accelerator bremsstrahlung and electron radiation fields. An extra problem was to provide isodose curves for manual scheduling of radiotherapy. The 15 VUMS-28-025 complex based on Elektronika-60 computer was chosen as a host computer, photodiodes were used as a semiconductor detector, the 70108 rod chamber and VA-J-18 dosemeters were used as an ionization chamber. The results of studies with the CODOS system have been shown that it meets the dosimetric requirements for therapeutic apparatus

Integrated information system for analysis of nuclear power plants

International Nuclear Information System (INIS)

Galperin, A.

1994-01-01

Performing complicated engineering analyses of a nuclear power plant requires storage and manipulation of a large amount of information, both data and knowledge. This information is characterized by its multidisciplinary nature, complexity, and diversity. The problems caused by inefficient and lengthy manual operations involving the data flow management within the frame-work of the safety-related analysis of a power plant can be solved by applying the computer aided engineering principles. These principles are the basis of the design of an integrated information storage system (IRIS). The basic idea is to create a computerized environment, which includes both database and functional capabilities. Consideration and analysis of the data types and required data manipulation capabilities as well as operational requirements, resulted in the choice of an object-oriented data-base management system (OODBMS) as a development platform for solving the software engineering problems. Several advantages of OODBMSs over conventional relations database systems were found of crucial importance, especially providing the necessary flexibility for different data types and extensibility potential. A detailed design of a data model is produced for the plant technical data and for the storage of analysis results. The overall system architecture was designed to assure the feasibility of integrating database capabilities with procedures and functions written in conventional algorithmic programming languages

Development of a geo-information system for the evaluation of active faults

Energy Technology Data Exchange (ETDEWEB)

Hwang, Sang Gi; Lee, G. B.; Kim, H. J. [Paichai Univ., Taejon (Korea, Republic of)] (and others)

2002-03-15

This project aims to assist the participants of the active fault project by computerizing the field and laboratory data of the study area. The geo-information system, therefore, not only contributes to the participants while they are organizing and analyzing their data but also gathers detailed information in digital form. A geological database can be established by organizing the gathered digital information from the participants, and the database can easily be sheared among specialists. In such purpose, a field system, which can be used by the project participants, has been attempting to be developed during the first project year. The field system contains not only a software but also available topographic and geological maps of the study area. The field system is coded by visual basic, and the mapobject component of ESRI and the TrueDBGrid OCX are also utilized. Major functions of the system are tools for vector and raster form topographic maps, database design and application, geological symbol plot, and the database search for the plotted geological symbol.

Computerized Decision Aids for Shared Decision Making in Serious Illness: Systematic Review.

Science.gov (United States)

Staszewska, Anna; Zaki, Pearl; Lee, Joon

2017-10-06

Shared decision making (SDM) is important in achieving patient-centered care. SDM tools such as decision aids are intended to inform the patient. When used to assist in decision making between treatments, decision aids have been shown to reduce decisional conflict, increase ease of decision making, and increase modification of previous decisions. The purpose of this systematic review is to assess the impact of computerized decision aids on patient-centered outcomes related to SDM for seriously ill patients. PubMed and Scopus databases were searched to identify randomized controlled trials (RCTs) that assessed the impact of computerized decision aids on patient-centered outcomes and SDM in serious illness. Six RCTs were identified and data were extracted on study population, design, and results. Risk of bias was assessed by a modified Cochrane Risk of Bias Tool for Quality Assessment of Randomized Controlled Trials. Six RCTs tested decision tools in varying serious illnesses. Three studies compared different computerized decision aids against each other and a control. All but one study demonstrated improvement in at least one patient-centered outcome. Computerized decision tools may reduce unnecessary treatment in patients with low disease severity in comparison with informational pamphlets. Additionally, electronic health record (EHR) portals may provide the opportunity to manage care from the home for individuals affected by illness. The quality of decision aids is of great importance. Furthermore, satisfaction with the use of tools is associated with increased patient satisfaction and reduced decisional conflict. Finally, patients may benefit from computerized decision tools without the need for increased physician involvement. Most computerized decision aids improved at least one patient-centered outcome. All RCTs identified were at a High Risk of Bias or Unclear Risk of Bias. Effort should be made to improve the quality of RCTs testing SDM aids in serious

Migration of the CNA maintenance information system to a client server architecture

International Nuclear Information System (INIS)

Gonzalez Crego, E.; Martin Lopez-Suevos, C.

1994-01-01

The paper explains the guidelines and methodology followed to carry out regulation of the CNA computerized maintenance system (SIGE) to a system with a client/server architecture based on ORACLE. The following guidelines were established to carry out migration: 1 Ensure that the new system would contain all the information of the former system, ie, no information would be lost during migration. 2 Improve the technical design of the application, while maintaining at least the functionality of the former application 3 incorporate modifications into the application which would permit incremental improvement of its functionality. 4 Carry out migration at the minimum cost in time and resources to construct the application, a strict development methodology was followed and certain standards were drawn up to significantly increase the speed. Special use was made of: 1 Data models 2 Process models which operate the data model 3 SQL-FORMS standards 4 Safety features

Status of routine post-mortem computerized tomography in Odense, Denmark

DEFF Research Database (Denmark)

Leth, Peter Mygind

2008-01-01

rarely is a substitute for autopsy, but may contribute with important new information in many cases such as identifications (including mass-disasters), battered child, gunshot wounds, traffic accidents and air embolism. Computerized tomography provides documentation in digital form - easily stored...

Human Reliability Analysis For Computerized Procedures

International Nuclear Information System (INIS)

Boring, Ronald L.; Gertman, David I.; Le Blanc, Katya

2011-01-01

This paper provides a characterization of human reliability analysis (HRA) issues for computerized procedures in nuclear power plant control rooms. It is beyond the scope of this paper to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper provides a review of HRA as applied to traditional paper-based procedures, followed by a discussion of what specific factors should additionally be considered in HRAs for computerized procedures. Performance shaping factors and failure modes unique to computerized procedures are highlighted. Since there is no definitive guide to HRA for paper-based procedures, this paper also serves to clarify the existing guidance on paper-based procedures before delving into the unique aspects of computerized procedures.

Intraosseous anesthesia with solution injection controlled by a computerized system versus conventional oral anesthesia: A preliminary study

OpenAIRE

Beneito-Brotons, Rut; Peñarrocha-Oltra, David; Ata-Ali, Javier; Peñarrocha, María

2011-01-01

Objective: To compare a computerized intraosseous anesthesia system with the conventional oral anesthesia techniques, and analyze the latency and duration of the anesthetic effect and patient preference. Design: A simple-blind prospective study was made between March 2007 and May 2008. Each patient was subjected to two anesthetic techniques: conventional and intraosseous using the Quicksleeper® system (DHT, Cholet, France). A split-mouth design was adopted in which each patient underwent trea...

Computerized Adaptive Personality Testing: A Review and Illustration With the MMPI-2 Computerized Adaptive Version.

Science.gov (United States)

Forbey, Johnathan D.; Ben-Porath, Yossef S.

2007-01-01

Computerized adaptive testing in personality assessment can improve efficiency by significantly reducing the number of items administered to answer an assessment question. Two approaches have been explored for adaptive testing in computerized personality assessment: item response theory and the countdown method. In this article, the authors…

On the article of V. A. Mashin 'Computerized systems of NPP operators support. (Psychological problems)'

International Nuclear Information System (INIS)

Prushinskij, B.Ya.

1995-01-01

Basic aspects of V.A. Mashin's article on NPP operator support computerized systems and problems of man-machine interrelation are analyzed. Sharing in the significant degree Mashin's point of view the author of this article considers that the most important aspects of this problem consist in dividing the responsibility for NPP safe operation between all participants of the NPP creation and operation and in the area of practical experience in assuring control functions reliability

Effectiveness of computerized clinical decision support systems for asthma and chronic obstructive pulmonary disease in primary care: a systematic review.

Science.gov (United States)

Fathima, Mariam; Peiris, David; Naik-Panvelkar, Pradnya; Saini, Bandana; Armour, Carol Lyn

2014-12-02

The use of computerized clinical decision support systems may improve the diagnosis and ongoing management of chronic diseases, which requires recurrent visits to multiple health professionals, disease and medication monitoring and modification of patient behavior. The aim of this review was to systematically review randomized controlled trials evaluating the effectiveness of computerized clinical decision systems (CCDSS) in the care of people with asthma and COPD. Randomized controlled trials published between 2003 and 2013 were searched using multiple electronic databases Medline, EMBASE, CINAHL, IPA, Informit, PsychINFO, Compendex, and Cochrane Clinical Controlled Trials Register databases. To be included, RCTs had to evaluate the role of the CCDSSs for asthma and/or COPD in primary care. Nineteen studies representing 16 RCTs met our inclusion criteria. The majority of the trials were conducted in patients with asthma. Study quality was generally high. Meta-analysis was not conducted because of methodological and clinical heterogeneity. The use of CCDSS improved asthma and COPD care in 14 of the 19 studies reviewed (74%). Nine of the nineteen studies showed statistically significant (p < 0.05) improvement in the primary outcomes measured. The majority of the studies evaluated health care process measures as their primary outcomes (10/19). Evidence supports the effectiveness of CCDSS in the care of people with asthma. However there is very little information of its use in COPD care. Although there is considerable improvement in the health care process measures and clinical outcomes through the use of CCDSSs, its effects on user workload and efficiency, safety, costs of care, provider and patient satisfaction remain understudied.

Computerized method and system for designing an aerodynamic focusing lens stack

Science.gov (United States)

Gard, Eric [San Francisco, CA; Riot, Vincent [Oakland, CA; Coffee, Keith [Diablo Grande, CA; Woods, Bruce [Livermore, CA; Tobias, Herbert [Kensington, CA; Birch, Jim [Albany, CA; Weisgraber, Todd [Brentwood, CA

2011-11-22

A computerized method and system for designing an aerodynamic focusing lens stack, using input from a designer related to, for example, particle size range to be considered, characteristics of the gas to be flowed through the system, the upstream temperature and pressure at the top of a first focusing lens, the flow rate through the aerodynamic focusing lens stack equivalent at atmosphere pressure; and a Stokes number range. Based on the design parameters, the method and system determines the total number of focusing lenses and their respective orifice diameters required to focus the particle size range to be considered, by first calculating for the orifice diameter of the first focusing lens in the Stokes formula, and then using that value to determine, in iterative fashion, intermediate flow values which are themselves used to determine the orifice diameters of each succeeding focusing lens in the stack design, with the results being output to a designer. In addition, the Reynolds numbers associated with each focusing lens as well as exit nozzle size may also be determined to enhance the stack design.

Implementation of a computerized system for the management of radioactive lightning rods and smoke detectors

International Nuclear Information System (INIS)

Nascimento, Rafael Azevedo do; Dellamano, Jose Claudio; Potiens Junior, Ademar Jose

2013-01-01

Smoke detectors and lighting rods, after used, are categorized as radioactive wastes and must be submitted to the institutes of the National Nuclear Energy Commission - CNEN. The control and registration of these sources are critical, because they impact the subsequent processes involved in the management of radioactive wastes, as well as all costs incurred. The use of Information Technology as a process tool is an important instrument for ensuring the control and safety of data by enabling real time reports on several variables. This allows for a quick response to inquiries from environmental and regulating authorities. The Nuclear and Energy Research Institute - IPEN, since the nineties, received until the middle of 2013 around 30,000 lighting rods and 20,000 smoke detectors. These devices are received and handled analogically on a daily-basis, with the use of paper forms and delivery scheduled by a phone call. The objective of this work is to describe the methodology used and detail each step of the implementation of a computerized system for the management of these devices by IPEN-CNEN/SP. (author)

Safety implications of computerized process control in nuclear power plants

International Nuclear Information System (INIS)

1991-02-01

Modern nuclear power plants are making increasing use of computerized process control because of the number of potential benefits that accrue. This practice not only applies to new plants but also to those in operation. Here, the replacement of both conventional process control systems and outdated computerized systems is seen to be of benefit. Whilst this contribution is obviously of great importance to the viability of nuclear electricity generation, it must be recognized that there are major safety concerns in taking this route. However, there is the potential for enhancing the safety of nuclear power plants if the full power of microcomputers and the associated electronics is applied correctly through well designed, engineered, installed and maintained systems. It is essential that areas where safety can be improved be identified and that the pitfalls are clearly marked so that they can be avoided. The deliberations of this Technical Committee Meeting are a step on the road to this goal of improved safety through computerized process control. This report also contains the papers presented at the technical committee meeting by participants. A separate abstract was prepared for each of these 15 presentations. Refs, figs and tabs

Unleashing the Effectiveness of Process-oriented Information Systems: Problem Analysis, Critical Success Factors, Implications

OpenAIRE

Mutschler, B.B.; Reichert, M.U.; Bumiller, J.

2008-01-01

Process-oriented information systems (IS) aim at the computerized support of business processes. So far, contemporary IS have often fail to meet this goal. To better understand this drawback, to systematically identify its rationales, and to derive critical success factors for business process support, we conducted three empirical studies: an exploratory case study in the automotive domain, an online survey among 79 IT professionals, and another online survey among 70 business process managem...

Joint two-view information for computerized detection of microcalcifications on mammograms

International Nuclear Information System (INIS)

Sahiner, Berkman; Chan, H.-P.; Hadjiiski, Lubomir M.; Helvie, Mark A.; Paramagul, Chinatana; Ge Jun; Wei Jun; Zhou Chuan

2006-01-01

We are developing new techniques to improve the accuracy of computerized microcalcification detection by using the joint two-view information on craniocaudal (CC) and mediolateral-oblique (MLO) views. After cluster candidates were detected using a single-view detection technique, candidates on CC and MLO views were paired using their radial distances from the nipple. Candidate pairs were classified with a similarity classifier that used the joint information from both views. Each cluster candidate was also characterized by its single-view features. The outputs of the similarity classifier and the single-view classifier were fused and the cluster candidate was classified as a true microcalcification cluster or a false-positive (FP) using the fused two-view information. A data set of 116 pairs of mammograms containing microcalcification clusters and 203 pairs of normal images from the University of South Florida (USF) public database was used for training the two-view detection algorithm. The trained method was tested on an independent test set of 167 pairs of mammograms, which contained 71 normal pairs and 96 pairs with microcalcification clusters collected at the University of Michigan (UM). The similarity classifier had a very low FP rate for the test set at low and medium levels of sensitivity. However, the highest mammogram-based sensitivity that could be reached by the similarity classifier was 69%. The single-view classifier had a higher FP rate compared to the similarity classifier, but it could reach a maximum mammogram-based sensitivity of 93%. The fusion method combined the scores of these two classifiers so that the number of FPs was substantially reduced at relatively low and medium sensitivities, and a relatively high maximum sensitivity was maintained. For the malignant microcalcification clusters, at a mammogram-based sensitivity of 80%, the FP rates were 0.18 and 0.35 with the two-view fusion and single-view detection methods, respectively. When the

Laboratory Computerization: The Case for a Prospective Analysis

OpenAIRE

Hurdle, John F.; Schwamm, Harry A.

1982-01-01

The argument is made that computerization of a laboratory should be preceeded by a thorough prospective analysis of laboratory operations. Points to be pondered include complementation of retrospective data, system cost justification, system performance justification, post-installation personnel adjustments, improved system utilization, improved manual performance, and insight into “how much” system to buy. A brief, general outline is offered describing how to approach such a study.

Algorithms for Computerized Fetal Heart Rate Diagnosis with Direct Reporting

Directory of Open Access Journals (Sweden)

Kazuo Maeda

2015-06-01

Full Text Available Aims: Since pattern classification of fetal heart rate (FHR was subjective and enlarged interobserver difference, objective FHR analysis was achieved with computerized FHR diagnosis. Methods: The computer algorithm was composed of an experts’ knowledge system, including FHR analysis and FHR score calculation, and also of an objective artificial neural network system with software. In addition, a FHR frequency spectrum was studied to detect ominous sinusoidal FHR and the loss of baseline variability related to fetal brain damage. The algorithms were installed in a central-computerized automatic FHR monitoring system, which gave the diagnosis rapidly and directly to the attending doctor. Results: Clinically perinatal mortality decreased significantly and no cerebral palsy developed after introduction of the centralized system. Conclusion: The automatic multichannel FHR monitoring system improved the monitoring, increased the objectivity of FHR diagnosis and promoted clinical results.

'Too much, too late': mixed methods multi-channel video recording study of computerized decision support systems and GP prescribing.

Science.gov (United States)

Hayward, James; Thomson, Fionagh; Milne, Heather; Buckingham, Susan; Sheikh, Aziz; Fernando, Bernard; Cresswell, Kathrin; Williams, Robin; Pinnock, Hilary

2013-06-01

Computerized decision support systems (CDSS) are commonly deployed to support prescribing, although over-riding of alerts by prescribers remains a concern. We aimed to understand how general practitioners (GPs) interact with prescribing CDSS in order to inform deliberation on how better to support prescribing decisions in primary care. Quantitative and qualitative analysis of interactions between GPs, patients, and computer systems using multi-channel video recordings of 112 primary care consultations with eight GPs in three UK practices. 132 prescriptions were issued in the course of 73 of the consultations, of which 81 (61%) attracted at least one alert. Of the total of 117 alerts, only three resulted in the GP checking, but not altering, the prescription. CDSS provided information and safety alerts at the point of generating a prescription. This was 'too much, too late' as the majority of the 'work' of prescribing occurred prior to using the computer. By the time an alert appeared, the GP had formulated the problem(s), potentially spent several minutes considering, explaining, negotiating, and reaching agreement with the patient about the proposed treatment, and had possibly given instructions and printed an information leaflet. CDSS alerts do not coincide with the prescribing workflow throughout the whole GP consultation. Current systems interrupt to correct decisions that have already been taken, rather than assisting formulation of the management plan. CDSS are likely to be more acceptable and effective if the prescribing support is provided much earlier in the process of generating a prescription.

A computerized check-out system for transducers in nuclear power plants

International Nuclear Information System (INIS)

Brandt, A.

1984-01-01

A computerized system for the acquisition, administration and recording of test data of about 1000 pressure meters (transducers) being collected annually in nuclear power stations is described. The Mobile System is set up by three components - the control pressure device, the intelligent interface and the microcomputer (PDP 11/23, 256 kB) - the whole being assembled on a moveable wagon which allows on site measurement of the transducers. The PDP 11/23, fully integrated in a VT 103 video terminal, connects to the interface via an IEEE-488 bus system. Its keyboard is equipped with operation keys to handle and control the different test phases - uncoupling the transducer from plant operation, linking the transducer to the Mobile System, testing for leaks in the pipe system, recording and correcting the characteristic curve, reinstallation of the transducer in plant operation. Filling and emptying of the pipelines for high pressure measuring is computer controlled as well. As each Mobile System is a stand-alone test device, the number of systems is freely selectable according to environmental conditions (radiative and non-radiative zones, accessability etc.), failure resp. availability considerations and other boundary conditions. Data transport to and from the Stationary System is done via magnetic tape cartridges (256 KB), which may pick-up data of 150 transducers, or online via twisted pair cable connections between the measuring points and the Stationary System. (orig./GL) [de

Development of a computerized handbook of architectural plans

NARCIS (Netherlands)

Koutamanis, A.

1990-01-01

The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of

Computerized coding system for life narratives to assess students' personality adaption

NARCIS (Netherlands)

He, Q.; Veldkamp, B.P.; Westerhof, G.J.; Pechenizkiy, Mykola; Calders, Toon; Conati, Cristina; Ventura, Sebastian; Romero, Cristobal; Stamper, John

2011-01-01

The present study is a trial in developing an automatic computerized coding framework with text mining techniques to identify the characteristics of redemption and contamination in life narratives written by undergraduate students. In the initial stage of text classification, the keyword-based

Computerized tomography of gall bladder cancer

International Nuclear Information System (INIS)

Todua, F.I.; Karmazanovskij, G.G.

1989-01-01

The authors have summed up the experience in the use of computerized tomography (CT) in diagnosis of gall bladder cancer. The investigation of 17 patients with cancer of this site showed a high informative value of the method. A retrospective comparative study of the results of CT and surgical interventions was carried out. It has been concluded that CT makes it possible not only to diagnose malignant lesions of the bile ducts but also to assess a possible scope of a forthcoming operation

Density evaluation by computerized tomography in plain soils over different manipulation systems; Avaliacao da densidade pelo metodo da tomografia computadorizada de um planossolo sob diferentes sistemas de manejo

Energy Technology Data Exchange (ETDEWEB)

Pedrotti, Alceu [Lavras Univ., MG (Brazil). Dept. de Ciencia do Solo; Pauletto, Eloy Antonio [Pelotas Univ., RS (Brazil). Dept. de Solos; Crestana, Silvio [Empresa Brasileira de Pesquisa Agropecuaria (EMBRAPA), Sao Carlos, SP (Brazil). Centro Nacional de Pesquisa e Desenvolvimento de Instrumentacao Agropecuaria (CNPDIA)

1996-08-01

The objective of this paper is the evaluation of a plain soil density in different culture systems determined by X ray computerized tomography.It was observed a larger variation in densities in soils profiles analysed. The identification of layers is better utilising computerized tomography than others technic 1 fig.

Safety parameter display system functions are integrated parts of the KWU KONVOI process information system (SPDS functions are parts of the KWU-PRINS)

International Nuclear Information System (INIS)

Aleite, W.; Geyer, K.H.

1984-01-01

The desirability of having flexible overview as well as extended detail information with pictorial and abstraction features and easy and quick access throughout the large-size control rooms in German plants has been recognized. Developments over the last years now make it possible to add on extensive computer driven VDU-systems to the three German KONVOI NPPs (Isar II, Emsland and Neckarwestheim II) thereby creating the Process Information System ''PRINS''. The new system is driven by multiple computers at different locations controlling about 30 full-graphic, high resolution Video Display Units. They are arranged singly and in three ''mxn - Information Panels'' distributed about the control room and present all thinkable kinds of display formats with more than 1000 separate pictures. The display of only single ''Safety Parameters'' or even complete ''Safety Goal Information'' on single or multiple VDUs in parallel is only one aspect of this computerized part of the entire integrated Information System. (orig./HP)

Information Technology Applications to Maintenance Management

Institute of Scientific and Technical Information of China (English)

Abdul Raouf S.I.

2003-01-01

Application of IT (Information Technology) to equipment management have not been ade-quately made. A system using Benefit Evaluation Ladder is described for evaluating the need for IT ap-plications to maintenance management. A systematic evaluation scheme for Computerized Maintenance Management System (CMMS) is presented.

Computerized Point of Sale = Faster Service + Better Accountability.

Science.gov (United States)

Pannell, Dorothy V.

1991-01-01

Describes selecting and installing a computerized point of sale for a district food service program; the equipment needed and preferred; and the training of trainers, managers, and cashiers. Also discusses the direct benefits and side benefits of the system. (MLF)

Towards Computerized Adaptive Assessment Based on Structured Tasks

NARCIS (Netherlands)

Tvarožek, Jozef; Kravcik, Milos; Bieliková, Mária

2008-01-01

Tvarožek, J., Kravčík, M., & Bieliková, M. (2008). Towards Computerized Adaptive Assessment Based on Structured Tasks. In W. Nejdl et al. (Eds.), Adaptive Hypermedia and Adaptive Web-Based Systems (pp. 224-234). Springer Berlin / Heidelberg.

Computerized Analytical Data Management System and Automated Analytical Sample Transfer System at the COGEMA Reprocessing Plants in La Hague

International Nuclear Information System (INIS)

Flament, T.; Goasmat, F.; Poilane, F.

2002-01-01

Managing the operation of large commercial spent nuclear fuel reprocessing plants, such as UP3 and UP2-800 in La Hague, France, requires an extensive analytical program and the shortest possible analysis response times. COGEMA, together with its engineering subsidiary SGN, decided to build high-performance laboratories to support operations in its plants. These laboratories feature automated equipment, safe environments for operators, and short response times, all in centralized installations. Implementation of a computerized analytical data management system and a fully automated pneumatic system for the transfer of radioactive samples was a key factor contributing to the successful operation of the laboratories and plants

[Computerized medical record: deontology and legislation].

Science.gov (United States)

Allaert, F A; Dusserre, L

1996-02-01

Computerization of medical records is making headway for patients' follow-up, scientific research, and health expenses control, but it must not alter the guarantees provided to the patients by the medical code of ethics and the law of January 6, 1978. This law, modified on July 1, 1994, requires to register all computerized records of personal data and establishes rights to protect privacy against computer misdemeanor. All medical practitioners using computerized medical records must be aware that the infringement of this law may provoke suing in professional, civil or criminal court.

Real time alert system: a disease management system leveraging health information exchange.

Science.gov (United States)

Anand, Vibha; Sheley, Meena E; Xu, Shawn; Downs, Stephen M

2012-01-01

Rates of preventive and disease management services can be improved by providing automated alerts and reminders to primary care providers (PCPs) using of health information technology (HIT) tools. Using Adaptive Turnaround Documents (ATAD), an existing Health Information Exchange (HIE) infrastructure and office fax machines, we developed a Real Time Alert (RTA) system. RTA is a computerized decision support system (CDSS) that is able to deliver alerts to PCPs statewide for recommended services around the time of the patient visit. RTA is also able to capture structured clinical data from providers using existing fax technology. In this study, we evaluate RTA's performance for alerting PCPs when their patients with asthma have an emergency room visit anywhere in the state. Our results show that RTA was successfully able to deliver "just in time" patient-relevant alerts to PCPs across the state. Furthermore, of those ATADs faxed back and automatically interpreted by the RTA system, 35% reported finding the provided information helpful. The PCPs who reported finding information helpful also reported making a phone call, sending a letter or seeing the patient for follow up care. We have successfully demonstrated the feasibility of electronically exchanging important patient related information with the PCPs statewide. This is despite a lack of a link with their electronic health records. We have shown that using our ATAD technology, a PCP can be notified quickly of an important event such as a patient's asthma related emergency room admission so further follow up can happen in near real time.

Transversal of Procedure Elements in a Computerized Procedure System

Energy Technology Data Exchange (ETDEWEB)

Jung, Yeonsub [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2014-05-15

APR1400 MCR(Main Control Room) has introduced CPS(Computerized Procedure System). APR400 CPS is framed with overview pane, step detail pane, and monitoring pane. The overview shows the step in one dimensional array. Diagram in the step detail pane is called as flowlogic diagram. The flowlogic diagram has advantage of being intuitive and not being segmented so that the interfaces are easy to follow and understand. While developing CPS software or training operators these interfaces, however, there is still areas to refine behaviors of flowlogic diagram. If flowlogic diagram has contingency instructions, it is sometime difficult to interpret it properly. Therefore this paper is trying to explain behavior of flowlogic diagram in view of procedure elements. Procedure execution can be called as transversal of steps and instructions in flowlogic diagram. Both hierarchy of procedures elements and flowlogic diagram provides useful framework to test transversal with completeness. Navigation button behaviors are interpreted in view of flowlogic diagram. The framework and flowlogic diagram can be further applied to improve CPS user interfaces.

Efficiency of computerized tomography in comparison with other neuroradiological investigation methods

International Nuclear Information System (INIS)

Kretzschmar, H.

1979-01-01

Computerized tomography is considered to be a decisive and the most reliable investigation method for the diagnosis of cerebral tumors. The rate of detection of intracranial blastomas is over 90%. Supratentorial growths are more easy to prove than tumors at the posterior cranial fossa. In the group of patients examined, 97.3% of the cerebral tumors were confirmed by computerized tomography: 98.7% of these were located above the tentorium and 89.3% under the tentorium. But the diagnostic value of computerized tomography is not only due to the high growth detection rate but also to its informative power as regards the position of growths in relation to vital centres, the type of the blastomas and their space-occupying effect. Thus this investigation method permits to evaluate the complex ''space occupation'' at one glance. By the angiographic method cerebral growths are confirmed in 86% of the cases; 88.6% of these are located above the tentorium. (orig.) [de

Commissioning and quality assurance of computerized planning systems for radiation treatment of cancer

International Nuclear Information System (INIS)

2004-01-01

Cancer is a significant health care problem; on average about half of all cancer patients are treated with radiation therapy worldwide. This mode of treatment uses complex technology that involves megavoltage radiation that, if not handled with the greatest of care, could lead to significant patient treatment errors and exposures of staff. Recent years have seen a rapid development in the technology of radiation oncology. One of the prime factors contributing to this rapid development has been the evolution of computer technology and its applications in: (a) patient diagnosis using sophisticated computerized diagnostic imaging equipment; (b) the process of radiation treatment planning using computerized radiation treatment planning systems (TPSs) that are capable of using data from diagnostic imagers; and (c) radiation dose delivery using relatively simple 60 Co machines or complex linear accelerators with computer controlled delivery systems including multileaf collimators (MLCs) for field shaping, possibly in a dynamic mode while the beam is on. The radiation treatment process involves the application of some or all of these technologies to provide the desired dose to the target volume while minimizing exposure to adjacent normal tissues. While dose computational equipment was available as early as 1951, more generalized treatment planning calculations evolved, including under the sponsorship of the IAEA, in the 1960s that made use of time sharing systems to develop atlases of isodose distributions for general use. In the 1970s and 1980s treatment planning computers became more specialized and readily available to individual radiation therapy centres. As computer technology evolved and became more compact so did TPSs, while at the same time dose calculation algorithms and image display capabilities became more sophisticated. While there is a substantial variation in capabilities, today's treatment planning computers have become readily available to virtually all

Validation of the news computerizing renography system developed of the CEADEN in order to improve the renography system existing at the National Nephrology Institute

International Nuclear Information System (INIS)

Medina Martin, D.; Rodriguez Gonzalez, F.; Arista Romeu, E.; Diaz Barreto, M.; Fraxedas Mayor, R.

1999-01-01

The isotopic renography is a technique that permits the evaluation of renal and the urinary tract diseases. In our country is not possible performs these studies only using gamma cameras due to the high costs of this technique, so the renography results an important method for this. It was developed a computerizing renography system in order to improve the renography system existing at the National Nephrology Institute (INEF), which is the head institute in this field in Cuba. The computerizing renography system includes a detection system, an interface card and software. As detection system was using the existing at the Institute. Specialists of the CEADEN using the high experience of the INEF and the international standards developed the card and software. The new software has several advantages with respect to the ancient, as example: normalized and standardizing control and processing protocols, a higher number of studies, the conduction and parameters validation of the studies, help system included, a database with the study results, teaching possibilities, etc. The validation of the news card and software was carried out simultaneously with the old system during 1 year approximately. This permitted to compare the main parameters and results in both systems. The results obtained were analyzed using statistical programs. As conclusion we obtained that both systems have a high correlation, so it is possible to substitute the old system with a more powerful and integral renography system

Modern aspects of the use of information technology in the system of continuing education

OpenAIRE

Khаitov Rizamat Shonazarovich

2015-01-01

The article deals with the use of information technology in continuing education, listing the legislative documents for computerization and development of information technologies in Uzbekistan and identifying opportunities for their use in continuing education.

Materials And Processes Technical Information System (MAPTIS) LDEF materials data base

Science.gov (United States)

Funk, Joan G.; Strickland, John W.; Davis, John M.

1993-01-01

A preliminary Long Duration Exposure Facility (LDEF) Materials Data Base was developed by the LDEF Materials Special Investigation Group (MSIG). The LDEF Materials Data Base is envisioned to eventually contain the wide variety and vast quantity of materials data generated from LDEF. The data is searchable by optical, thermal, and mechanical properties, exposure parameters (such as atomic oxygen flux) and author(s) or principal investigator(s). Tne LDEF Materials Data Base was incorporated into the Materials and Processes Technical Information System (MAPTIS). MAPTIS is a collection of materials data which has been computerized and is available to engineers, designers, and researchers in the aerospace community involved in the design and development of spacecraft and related hardware. The LDEF Materials Data Base is described and step-by-step example searches using the data base are included. Information on how to become an authorized user of the system is included.

Value of computerized tomography in the diagnosis of bone and musculoskeletal system tumors of the pelvis and extremities

International Nuclear Information System (INIS)

Langer, R.; Langer, M.

1983-01-01

49 cases of tumors of the musculoskeletal system of the pelvis and the extremities have been investigated by computerized tomography. The CT was performed only after conventional radiologic methods. The results are discussed and compared with those described in the literature. The advantages and disadvantages of CT of musculoskeletal disorders are discussed. We consider the CT to be of value in disorders of the musculoskeletal system, specially, if operative- or radiotherapy is planned. (orig.) [de

Computerized tomography of the vertebral column following traumatic lesion

International Nuclear Information System (INIS)

Taenzer, B.; Gmelin, E.; Burmester, E.; Babaian, E.; Weiss, H.D.; Hohlbach, G.

1984-01-01

In 58 patients with lesions of the vertebral column in the thoracal and lumbar section established by conventional X-ray, the informative power of computerized tomography was tested. Axial projection with the superimposition-free presentation of bone and soft-tissue structures in the motional segment clears up the diagnostically decisive question of the extent of the lesion and form of fracture, and thus provides information on the stability or instability of the fracture relevant for the therapeutic action taken. All patients had compression fractures of vertebrae, with a fragment of the front edge broken away in 50 cases and one of the back edge broken away in 17 cases. In 30 cases the intervertebral disks were damaged. 43 fractures were stable, 25 were unstable. The instability of 13 fractures was only recognized by CT. In essence, the diagnostic action to be taken begins with a grand-survey X-ray in two planes as a screening, with computerized tomography following in the positive case. Conventional tomograms are not necessary. (BWU) [de

Digital image information systems in radiology

International Nuclear Information System (INIS)

Greinacher, C.F.C.; Luetke, B.; Seufert, G.

1987-01-01

About 25% of all patient examinations are performed digitally in a today's radiological department. A computerized system is described that supports generation, transport, interpretation and archiving of digital radiological images (Picture Archiving and Communication System PACS). The technical features concerning image communication via local area networks, image storage on magnetic and optical media and digital workstations for image display and manipulation are described. A structured system architecture is introduced. It allows flexible adaption to individual organizations and minimizes the requirements of the communication network. (orig.) [de

Safeguarding nuclear materials in the former Soviet Republics through computerized materials protection, control and accountability

International Nuclear Information System (INIS)

Roumiantsev, A.N.; Ostroumov, Y.A.; Whiteson, R.; Seitz, S.L.; Landry, R.P.; Martinez, B.J.; Boor, M.G.; Anderson, L.K.; Gary, S.P.

1997-01-01

The threat of nuclear weapons proliferation is a problem of global concern. International efforts at nonproliferation focus on preventing acquisition of weapons-grade nuclear materials by unauthorized states, organizations, or individuals. Nonproliferation can best be accomplished through international cooperation in the application of advanced science and technology to the management and control of nuclear materials. Computerized systems for nuclear material protection, control, and accountability (MPC and A) are a vital component of integrated nuclear safeguards programs. This paper describes the progress of scientists in the United States and former Soviet Republics in creating customized, computerized MPC and A systems. The authors discuss implementation of the Core Material Accountability System (CoreMAS), which was developed at Los Alamos National Laboratory by the US Department of Energy and incorporates, in condensed and integrated form, the most valuable experience gained by US nuclear enterprises in accounting for and controlling nuclear materials. The CoreMAS approach and corresponding software package have been made available to sites internationally. CoreMAS provides methods to evaluate their existing systems and to examine advantages and disadvantages of customizing CoreMAS or improving their own existing systems. The sites can also address crucial issues of software assurance, data security, and system performance; compare operational experiences at sites with functioning computerized systems; and reasonably evaluate future efforts. The goal of the CoreMAS project is to introduce facilities at sites all over the world to modern international MPC and A practices and to help them implement effective, modern, computerized MPC and A systems to account for their nuclear materials, and thus reduce the likelihood of theft or diversion. Sites are assisted with MPC and A concepts and the implementation of an effective computerized MPC and A system

Microcomputer Network for Computerized Adaptive Testing (CAT)

Science.gov (United States)

1984-03-01

PRDC TR 84-33 \\Q.�d-33- \\ MICROCOMPUTER NETWOJlt FOR COMPUTERIZED ADAPTIVE TESTING ( CAT ) Baldwin Quan Thomas A . Park Gary Sandahl John H...ACCEIIION NO NPRDC TR 84-33 4. TITLE (-d Sul>tlllo) MICROCOMP UTER NETWORK FOR COMPUTERIZED ADA PTIVE TESTING ( CAT ) 1. Q B. uan T. A . Park...adaptive testing ( CAT ) Bayesian sequential testing 20. ABSTitACT (Continuo on ro•••• aide II noco .. _, _., ld-tlly ,.,. t.loclt _._.) DO Computerized

Nuclear information: An overview of IAEA's activities

International Nuclear Information System (INIS)

Marchesi, I.H.; Konstantinov, L.V.

1986-01-01

As stated in this overview of IAEA nuclear information activities the Agency's role in information services is rapidly evolving and multifaceted. The Agency maintains more than 200 computerized files of information. Some 60 of these are part of systems directly related to nuclear activities. Some of these are briefly profiled in this overview such as INIS, the IAEA Nuclear Data Programme, the IAEA Incident Reporting System, the IAEA Energy and Economic Databank, the IAEA Power Reactor Information System, the Nuclear Fuel Cycle Information System, and the International Uranium Geology Information System. Future directions are pointed out. Different ways to upgrade information systems are listed

Cost-effectiveness analysis of computerized ECG interpretation system in an ambulatory health care organization.

Science.gov (United States)

Carel, R S

1982-04-01

The cost-effectiveness of a computerized ECG interpretation system in an ambulatory health care organization has been evaluated in comparison with a conventional (manual) system. The automated system was shown to be more cost-effective at a minimum load of 2,500 patients/month. At larger monthly loads an even greater cost-effectiveness was found, the average cost/ECG being about $2. In the manual system the cost/unit is practically independent of patient load. This is primarily due to the fact that 87% of the cost/ECG is attributable to wages and fees of highly trained personnel. In the automated system, on the other hand, the cost/ECG is heavily dependent on examinee load. This is due to the relatively large impact of equipment depreciation on fixed (and total) cost. Utilization of a computer-assisted system leads to marked reduction in cardiologists' interpretation time, substantially shorter turnaround time (of unconfirmed reports), and potential provision of simultaneous service at several remotely located "heart stations."

Morphological analysis of the vestibular aqueduct by computerized tomography images

International Nuclear Information System (INIS)

Marques, Sergio Ricardo; Smith, Ricardo Luiz; Isotani, Sadao; Alonso, Luis Garcia; Anadao, Carlos Augusto; Prates, Jose Carlos; Lederman, Henrique Manoel

2007-01-01

Objective: In the last two decades, advances in the computerized tomography (CT) field revise the internal and medium ear evaluation. Therefore, the aim of this study is to analyze the morphology and morphometric aspects of the vestibular aqueduct on the basis of computerized tomography images (CTI). Material and method: Computerized tomography images of vestibular aqueducts were acquired from patients (n = 110) with an age range of 1-92 years. Thereafter, from the vestibular aqueducts images a morphometric analysis was performed. Through a computerized image processing system, the vestibular aqueduct measurements comprised of its area, external opening, length and the distance from the vestibular aqueduct to the internal acoustic meatus. Results: The morphology of the vestibular aqueduct may be funnel-shaped, filiform or tubular and the respective proportions were found to be at 44%, 33% and 22% in children and 21.7%, 53.3% and 25% in adults. The morphometric data showed to be of 4.86 mm 2 of area, 2.24 mm of the external opening, 4.73 mm of length and 11.88 mm of the distance from the vestibular aqueduct to the internal acoustic meatus, in children, and in adults it was of 4.93 mm 2 , 2.09 mm, 4.44 mm, and 11.35 mm, respectively. Conclusions: Computerized tomography showed that the vestibular aqueduct presents high morphological variability. The morphometric analysis showed that the differences found between groups of children and adults or between groups of both genders were not statistically significant

Reliability of computerized safety systems at nuclear power plants. Report of a technical committee meeting held in Vienna, 21-25 June 1993

International Nuclear Information System (INIS)

1995-03-01

Computer based technology is increasingly used in order to perform safety functions. In some recently designed nuclear power plants the whole safety system is computerized. In older plants replacement of conventional technology based system is seen to be of benefit. If the new technology is to be used, it must meet at least the same level of quality and reliability requirements as specified for conventional technology. However, there is a potential for enhancing the safety of nuclear power plants if the full power of computer technology is applied correctly through well designed, engineered and tested systems which are properly installed and maintained. It is essential that areas where reliability and quality can be improved are identified and that methods for assessing and assuring reliability are developed. The results of the Technical Committee Meeting on Reliability of Computerized Safety Systems at Nuclear Power Plants presented in this report are a step on the road to this goal of improved nuclear safety. Refs, figs and tabs

Data bank for a data retrieval system

Energy Technology Data Exchange (ETDEWEB)

Vernikovskii, V V

1980-01-01

The data bank of the computerized data retrieval system is an organic and constituent part of the system; the level of technology and performance of the data retrieval system as a whole depend on the results of its design and operation. The data bank integrates a storage system for the entire set of data, as well as implementing an organization of a feasible storage mode for the system dictionary, computer processing procedures, user forms, system archieves and other service information. Functions of the data bank are computerized by means of a database control system. The retriveal system data bank was designed for the OKA database control system; the selection and evaluation of the feasibility of the OKA database control system, in turn, were one stage in the design of the system as a whole. The OKA database control system has been used to computerize data retrieval functions in the computerized data retrieval system, and also to maintain the system data bank in updated status.

Usability of computerized nursing process from the ICNP® in intensive care units

Directory of Open Access Journals (Sweden)

Daniela Couto Carvalho Barra

2015-04-01

Full Text Available OBJECTIVE To analyze the usability of Computerized Nursing Process (CNP from the ICNP® 1.0 in Intensive Care Units in accordance with the criteria established by the standards of the International Organization for Standardization and the Brazilian Association of Technical Standards of systems. METHOD This is a before-and-after semi-experimental quantitative study, with a sample of 34 participants (nurses, professors and systems programmers, carried out in three Intensive Care Units. RESULTS The evaluated criteria (use, content and interface showed that CNP has usability criteria, as it integrates a logical data structure, clinical assessment, diagnostics and nursing interventions. CONCLUSION The CNP is a source of information and knowledge that provide nurses with new ways of learning in intensive care, for it is a place that provides complete, comprehensive, and detailed content, supported by current and relevant data and scientific research information for Nursing practices.

Evaluation of brain scintigraphy and computerized tomography

International Nuclear Information System (INIS)

Cavailloles, F.; Dairou, R.; Desbleds, M.T.; Benoit, C.; Larmande, P.; Bok, B.; Alperovitch, A.

1983-01-01

In order to assess the clinical usefulness of brain computerized tomography and radionuclide scan, a prospective study was performed on a series of 554 patients. The detection rate was assessed as well as the identification rate of lesions. In addition, the usefulness of both tests was appreciated subjectively by two neurologists reviewing the patients' files. Both give reasonably similar results: computerized tomography is superior to radionuclide scan in the diagnosis of tumors and intracerebral hematomas, the radionuclide scan being slightly superior in the diagnosis of purely ischemic CVA and subdural hematomas. The superiority which was subjectively conceded to computerized tomography was greater than that objectively demonstrated. However, clinical usefulness of computerized tomography was judged important in only 50% of the cases. Moreover, to request both computerized tomography and radionuclide scan appeared as having no interest in 83% of the cases. In that series, the diagnostic hypotheses were in agreement with the final diagnosis in 88% of the cases. Bias encountered in this type of studies are discussed [fr

The International Nuclear Information System. The first forty years 1970-2010

International Nuclear Information System (INIS)

Todeschini, Claudio

2010-10-01

The Statute of the IAEA came into force in July 1957. It was with the desire to more adequately fulfill the statutory function that during the 1960's the Agency began exploring the possibility of establishing a scheme that would provide computerized access to a comprehensive collection of references to the world's nuclear literature. The outcome of these efforts was the establishment of the International Nuclear Information System (INIS) that produced its first products in May 1970. The system was designed as an international cooperative venture, requiring the active participation of its members. It started operations with 25 members and the success and usefulness of the system has been proven by the fact that present membership is 146. The present report describes the road that led to the creation of INIS. It also describes the present operation of the system, the current methods used to collect and process the data on nuclear literature and the various products and services that the system places at the disposal of its users. Furthermore, it gives insights into current thinking for future developments that will facilitate access to an increasing variety of nuclear related information available from the IAEA, bibliographic and numerical data, full text of published and 'grey literature', multilingual nuclear terminology information as well as facilitate access to other sources of nuclear related information maintained outside the IAEA

MedEx: a medication information extraction system for clinical narratives

Science.gov (United States)

Stenner, Shane P; Doan, Son; Johnson, Kevin B; Waitman, Lemuel R; Denny, Joshua C

2010-01-01

Medication information is one of the most important types of clinical data in electronic medical records. It is critical for healthcare safety and quality, as well as for clinical research that uses electronic medical record data. However, medication data are often recorded in clinical notes as free-text. As such, they are not accessible to other computerized applications that rely on coded data. We describe a new natural language processing system (MedEx), which extracts medication information from clinical notes. MedEx was initially developed using discharge summaries. An evaluation using a data set of 50 discharge summaries showed it performed well on identifying not only drug names (F-measure 93.2%), but also signature information, such as strength, route, and frequency, with F-measures of 94.5%, 93.9%, and 96.0% respectively. We then applied MedEx unchanged to outpatient clinic visit notes. It performed similarly with F-measures over 90% on a set of 25 clinic visit notes. PMID:20064797

A computerized system for control and management of radionuclide inventory: application in nuclear medicine

International Nuclear Information System (INIS)

Hoory, S.; Levy, I.M.; Moskowitz, G.; Bandyopadhyay, D.; Vaugeois, J.C.

1982-01-01

An interactive computerized system for radioisotope management and instantaneous inventory is reported. The system is capable of handling operations such as filing, nuclear imaging and disposing of various radionuclides. All radiopharmaceutical transactions are achieved with the aid of a Prime 300 mini-computer of 192K words of high speed semi-conductor memory and over 120 mega bytes of disk storage. The system automatically corrects for the appropriate decay, monitors and updates the storage file after every subsequent study. The performed study is recorded in a special file, together with the time and data retrieved from the computer's real time clock at the time of the entry. The system provides an organized and complete bookkeeping of all records concerning radionuclide transactions. It is found to be simple, efficient, highly versatile, and drastically reduces the time of operation and errors in handling the radioisotope inventory. (author)

Instrumentation and control activities at the electric power research institute to support computerized support systems

International Nuclear Information System (INIS)

Naser, J.

1996-01-01

Most nuclear power plants in the United States are operating with their original analog I and C equipment. This equipment requires increasing maintenance efforts to sustain systems performance. Decreasing availability of replacement parts and support organization for analog technology accentuate obsolescence problems and resultant O and M cost increases. Modern technology, especially digital systems, offers improved functionality, performance, and reliability; solutions to obsolescence of equipment; reduction in O and M costs; and the potential to enhance safety. Digital systems, including computerized support systems, with their inherent advantages will be implemented only if reliable and cost-effective implementation and licensing acceptance is achieved and if the upgraded systems supports reduced power production costs. EPRI and its member utilities are working together under the Integrated I and C Upgrade Initiative to address I and C issues. (author). 23 refs

A practical appreciation of the implementation of a fully computerized monitoring and control system in N4 NFP series: An advanced instrumentation and control system

Energy Technology Data Exchange (ETDEWEB)

DaCruz, P. [Atos Origin, 4, Triton Square, Regent' s Place, London NW1 3HG (United Kingdom)

2006-07-01

Sema Group (acquired in February 2004 by Atos Origin) was selected by EDF to design, develop and supply this system, based on their product Advanced Data Acquisition and Control System (ADACS). The purpose of this paper is to give a practical appreciation from both the demand and supply perspectives of the implementation of the fully computerized Monitoring and Control systems. This is a joint presentation by EDF and Atos Origin based on their experiences of the N4 programme.

Use of Equipment Information System (EQUIS) to determine priority for purchasing safeguards equipment

International Nuclear Information System (INIS)

Silberberg, S.

1988-01-01

To manage its large world-wide inventory of safeguards equipment, the IAEA Safeguards department uses a computerized Equipment Information System (EQUIS). EQUIS data have been analyzed using Queueing Theory to determine if inventory is adequate to meet inspector demands and in those cases where it is inadequate, to indicate how many additional units should be procured. Results are tabulated for various types of non-destructive analysis (NDA) equipment. For equipment where there is a high turnover and hence a large amount of data, the analysis provides a powerful tool for assisting procurement decisions

Mobile Computerized Procedure System for the Improved Situation Awareness among Field Workers and Main Control Room Operators

International Nuclear Information System (INIS)

Lee, Sungjin; Seong, Nokyu; Jung, Yeonsub

2013-01-01

This paper explains the technical issues of the mobile CPS (m-CPS) in the conceptual development stage. The proposed m-CPS can be developed with many recent technologies in the various industry fields based on CRI CPS. Performance and stability of CRI CPS have been tested several times until now. It is expected that more human errors can be reduced by the m-CPS through improved situation awareness and human performance tools for local workers and MCR operators. Some considerations as well as mentioned ones will be reflected in the m-CPS development. Human errors can occur during the test and maintenance of the generator, safety injection system and reactor coolant inventory in nuclear power plants (NPPs). Most of human errors have been occurred by the omission of the prevention techniques such as the self-check, the peer-check, the concurrent verification and etc. Another important reason is the insufficient information sharing among main control room (MCR) operators and field workers. Various field service automation tools have been developed with recent information technology in many countries. APR1400 computerized procedure system (CPS) has been developed for the MCR operators of Shin-Kori 3 and 4 units. Especially, the concurrent verification support design is applied in the construction project of Shin-Hanul 1 and 2 CPS. KHNP central research institute (CRI) expects that the extended application of CPS including the field activity, that is a kind of mobile CPS, can enhance the reduction of human errors

Development of computerized supporting system for emergency response in nuclear power plant

International Nuclear Information System (INIS)

Lee, Jae Il

1992-02-01

In emergency situation of nuclear power plants, effective use of emergency operating procedures (EOPs) is a crucial part of the emergency response process. However, there are several problems in the emergency operating procedures because of the form of the written procedures. They are voluminous and complicate for effective references under high stress situation. Inevitably, it takes time that could be better spent employing measures to control and stabilize to select the correct procedures and apply the decision logic. In this study, a computerized supporting system has been developed to reduce the operator error possibility under emergency situations of nuclear power plant. Using on-line input parameters, the system can determine the status of the critical safety functions and can find appropriate procedures and necessary operator actions automatically. Moreover, the system can help the operator decision making in the core melt accident situation. By tracking the EOP in an on-line mode, most steps concerning checking or verifying plant state are processed automatically without operator participations. Therefore, the interactions between the system and the operator are simplified significantly and the possibility of human error is reduced

Organizing safety: conditions for successful information assurance programs.

Science.gov (United States)

Collmann, Jeff; Coleman, Johnathan; Sostrom, Kristen; Wright, Willie

2004-01-01

Organizations must continuously seek safety. When considering computerized health information systems, "safety" includes protecting the integrity, confidentiality, and availability of information assets such as patient information, key components of the technical information system, and critical personnel. "High Reliability Theory" (HRT) argues that organizations with strong leadership support, continuous training, redundant safety mechanisms, and "cultures of high reliability" can deploy and safely manage complex, risky technologies such as nuclear weapons systems or computerized health information systems. In preparation for the Health Insurance Portability and Accountability Act (HIPAA) of 1996, the Office of the Assistant Secretary of Defense (Health Affairs), the Offices of the Surgeons General of the United States Army, Navy and Air Force, and the Telemedicine and Advanced Technology Research Center (TATRC), US Army Medical Research and Materiel Command sponsored organizational, doctrinal, and technical projects that individually and collectively promote conditions for a "culture of information assurance." These efforts include sponsoring the "P3 Working Group" (P3WG), an interdisciplinary, tri-service taskforce that reviewed all relevant Department of Defense (DoD), Miliary Health System (MHS), Army, Navy and Air Force policies for compliance with the HIPAA medical privacy and data security regulations; supporting development, training, and deployment of OCTAVE(sm), a self-directed information security risk assessment process; and sponsoring development of the Risk Information Management Resource (RIMR), a Web-enabled enterprise portal about health information assurance.

Computerized tomography of orbital lesions

International Nuclear Information System (INIS)

Kuroiwa, Mayumi

1981-01-01

Two different types of computerized tomography scanners (CT scanner), i.e. a whole-body CT scanner (GE-CT/T8800) and a cerebral CT scanner (EMI-1010), were compared in the assessment and diagnosis of various orbital lesions. The whole-body CT scanner was found to be advantageous over the cerebral CT scanner for the following reasons: (1) CT images were more informative due to thinner slices associated with smaller-sized and larger-numbered matrices; (2) less artifacts derived from motion of the head or eyeball were produced because of the shorter scanning time; (3) with a devised gantry, coronal dissections were available whenever demanded. (author)

Introduction to CRRIS: a computerized radiological risk investigation system for assessing atmospheric releases of radionuclides

International Nuclear Information System (INIS)

Baes, C.F. III; Miller, C.W.; Kocher, D.C.; Sjoreen, A.L.; Murphy, B.D.

1985-08-01

The CRRIS is a Computerized Radiological Risk Investigation System consisting of eight fully integrated computer codes which calculate environmental transport of atmospheric releases of radionuclides and resulting doses and health risks to individuals or populations. Each code may also be used alone for various assessment applications. Radionuclides are handled by the CRRIS either in terms of the released radionuclides or the exposure radionuclides which consist of both the released nuclides and decay products that grow in during environmental transport. The CRRIS is not designed to simulate short-term effects. 51 refs

Dosimetric and non-dosimetric evaluation of PrecisePLAN computerized radiation treatment planning system

International Nuclear Information System (INIS)

Srinidhi, G.C.; Ramya, B.; Aswathi, Raj; Boban, Minu; Solomon, J.G.R; Vidyasagar, M.S.

2008-01-01

Cancer is a significant health care problem; on an average about half of all cancer patients are treated with radiation therapy worldwide. This mode of treatment uses complex technology that involves megavoltage radiation, computerized TPSs and delivery systems like MLCs, if not handled with the greatest of care, could lead to significant patient treatment errors and exposures of staff. As computer technology evolved and became more compact so did TPSs, while at the same time dose calculation algorithms and image display capabilities became more sophisticated. As part of the implementation of radiation therapy technology into clinical practice, it is important to recognize that such technology has inherent risks if not handled and administered properly

Computerized accountability program is operating - DYMCAS

International Nuclear Information System (INIS)

Combs, S.W.; Mee, W.T.

1983-01-01

The nuclear materials control and accountability program in the Oak Ridge Y-12 Plant has been placed on a computerized system identified as DYMCAS (Dynamic Special Nuclear Materials Control and Accountability System). The primary gola of the DYMCAS is to assist in detecting the diversion of special nuclear material (SNM). Secondly, the system is expected to assure quality inventory reconciliations both under normal and emergency situations. The system has been installed and was placed on active status in April 1982. Since that time numerous problems have surfaced and been resolved; i.e., delays of input, hardware breakdown, and misunderstandings of needs. An explanation of these problems, including examples and alterations that have made the system workable, are presented

Abnormal computerized dynamic posturography findings in dizzy patients with normal ENG results.

Science.gov (United States)

Sataloff, Robert T; Hawkshaw, Mary J; Mandel, Heidi; Zwislewski, Amy B; Armour, Jonathan; Mandel, Steven

2005-04-01

The complexities of the balance system create difficulties for professionals interested in testing equilibrium function objectively. Traditionally, electronystagmography (ENG) has been used for this purpose, but it provides information on only a limited portion of the equilibrium system. Computerized dynamic posturography (CDP) is less specific than ENG, but it provides more global insight into a patient's ability to maintain equilibrium under more challenging environmental circumstances. CD Palso appears to be valuable in obtaining objective confirmation of an abnormality in some dizzy patients whose ENG findings are normal. Our review of 33 patients with normal ENG results and abnormal CDP findings suggests that posturography is useful for confirming or quantifying a balance abnormality in some patients whose complaints cannot be confirmed by other tests frequently used by otologists.

Information Processing and Coaching Treatments in an Intelligent Tutoring System

National Research Council Canada - National Science Library

Dillon, Ronna

1997-01-01

The purpose of this effort was to develop an intelligent tutoring system (ITS) to train test administrators how to operate computerized adaptive testing Armed Services Vocational Aptitude Battery (CAT-ASVAB...

Failed fuel rod detection system and computerized manipulator during outages

International Nuclear Information System (INIS)

Boehm, H.H.; Foerch, H.

1984-01-01

During regular outages spent fuel assemblies need to be replaced and relocated within the core. Defective fuel rods in particular fuel assemblies have to be removed from further service and before delivery of such faulty fuel assemblies to a reprocessing plant. The system which Brown Boveri Reaktor GmbH and Krautkraemer have developed in the Federal Republic of Germany is capable of directly locating the defective rods in a proper fuel assembly. Inspection times are comparable to those of standard sipping methods, with the advantages of immediately available results and direct identification of the defective fuel rods. During the repair of fuel assemblies this system allows withdrawal of individual defective rods. With the sipping method all the fuel rods of a defective fuel assembly need to be removed and inspected by eddy current testing. During steam generator inspection and repair personnel are exposed to ample radiation. A remotely controlled, computerized manipulator was used to significantly reduce the radiation dose by automating steps in the procedures; at the same time inspection and repair times were reduced. The main features of the manipulator are a rigid component construction of the leg and two arms, and a resolver control for horizontal and vertical motion that enables rapid and accurate access to a desired tube (author)

Anti-3-[(18)F]FACBC positron emission tomography-computerized tomography and (111)In-capromab pendetide single photon emission computerized tomography-computerized tomography for recurrent prostate carcinoma: results of a prospective clinical trial.

Science.gov (United States)

Schuster, David M; Nieh, Peter T; Jani, Ashesh B; Amzat, Rianot; Bowman, F Dubois; Halkar, Raghuveer K; Master, Viraj A; Nye, Jonathon A; Odewole, Oluwaseun A; Osunkoya, Adeboye O; Savir-Baruch, Bital; Alaei-Taleghani, Pooneh; Goodman, Mark M

2014-05-01

We prospectively evaluated the amino acid analogue positron emission tomography radiotracer anti-3-[(18)F]FACBC compared to ProstaScint® ((111)In-capromab pendetide) single photon emission computerized tomography-computerized tomography to detect recurrent prostate carcinoma. A total of 93 patients met study inclusion criteria who underwent anti-3-[(18)F]FACBC positron emission tomography-computerized tomography plus (111)In-capromab pendetide single photon emission computerized tomography-computerized tomography for suspected recurrent prostate carcinoma within 90 days. Reference standards were applied by a multidisciplinary board. We calculated diagnostic performance for detecting disease. In the 91 of 93 patients with sufficient data for a consensus on the presence or absence of prostate/bed disease anti-3-[(18)F]FACBC had 90.2% sensitivity, 40.0% specificity, 73.6% accuracy, 75.3% positive predictive value and 66.7% negative predictive value compared to (111)In-capromab pendetide with 67.2%, 56.7%, 63.7%, 75.9% and 45.9%, respectively. In the 70 of 93 patients with a consensus on the presence or absence of extraprostatic disease anti-3-[(18)F]FACBC had 55.0% sensitivity, 96.7% specificity, 72.9% accuracy, 95.7% positive predictive value and 61.7% negative predictive value compared to (111)In-capromab pendetide with 10.0%, 86.7%, 42.9%, 50.0% and 41.9%, respectively. Of 77 index lesions used to prove positivity histological proof was obtained in 74 (96.1%). Anti-3-[(18)F]FACBC identified 14 more positive prostate bed recurrences (55 vs 41) and 18 more patients with extraprostatic involvement (22 vs 4). Anti-3-[(18)F]FACBC positron emission tomography-computerized tomography correctly up-staged 18 of 70 cases (25.7%) in which there was a consensus on the presence or absence of extraprostatic involvement. Better diagnostic performance was noted for anti-3-[(18)F]FACBC positron emission tomography-computerized tomography than for (111)In-capromab pendetide single

The information system of health networks: the re-engeneering of the medecine in e-health

Directory of Open Access Journals (Sweden)

Maryline Margueritte

2013-04-01

Full Text Available Health networks have developed devices for several years enabling coordinated care of patients in France, both medical plans that medico-psycho-social and human. Some have developed computerized health records shared for sharing useful information for the coordination and continuity of care. Since 2009 with the reform of the hospital you want to install the operating modes cooperative between professionals and users of the health system. Implementation of a health information system to ensure on the one hand, the transversality of the business process with the patient and secondly to measure the results of the medical and economic evolution of a complex system of information. The possibilities offered by the information technologies of information and communication enable the development of applications supporting increased participation "on line" for citizens. The "ambulatory" exporting health outside the walls. This is an innovative medicine that allows the patient to stay in his "home". In France, this re-engineering is based on four areas: a medical record, a collective ownership by the medical and paramedical professions, empowerment of patients and networking in the health sector.

Integrated System Validation Usability Questionnaire: Computerized Procedures

International Nuclear Information System (INIS)

Garcés, Ma. I.; Torralba, B.

2015-01-01

The Research and Development (R&D) project on “Theoretical and Methodological Approaches to Integrated System Validation of Control Rooms, 2014-2015”, in which the research activities described in this report are framed, has two main objectives: to develop the items for an usability methodology conceived as a part of the measurement framework for performance-based control room evaluation that the OECD Halden Reactor Project will test in the experiments planned for 2015; and the statistical analysis of the data generated in the experimental activities of the Halden Man-Machine Laboratory (HAMMLAB) facility, with previous usability questionnaires, in 2010 and 2011. In this report, the procedure designed to meet the first goal of the project is described, in particular, the process followed to identify the items related to operating procedures, both computer and paper-based, one of the elements to be included in the usability questionnaire. Three phases are performed, in the first one, the approaches developed by the United States Nuclear Regulatory Commission, NRC, are reviewed, the models used by the nuclear industry and their technical support organizations, mainly, the Electric Power Research Institute, EPRI, are analyzed, and scientist advances are also explored. In the remaining stages, general and specific guidelines for computerized and paper-based procedures are compared and criteria for the preliminary selection of the items that should be incorporated into the usability questionnaire are defined. This proposal will be reviewed and adapted by the Halden Reactor Project to the design of the specific experiments performed in HAMLAB.

Nuclear computerized library for assessing reactor reliability (NUCLARR): User's guide: Part 3, NUCLARR system description

International Nuclear Information System (INIS)

Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

1988-06-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 3: NUCLARR System Description, provides an in-depth discussion of the design characteristics and special features of the NUCLARR software. Part 3 also presents the organization of the data base structures and techniques used to manipulate the data

A Development Method of Mobile Computerized Procedure System for the Cooperation among Field Workers and Main Control Room Operators in Korean Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Sun Jin; Seong, No Kyu; Jung, Yeon Sub

2014-01-01

Human errors can occur during the test and maintenance of steam generator, safety injection system and other various systems and devices in nuclear power plants (NPPs). Most of human errors can be improved by the human error prevention techniques such as self-check, peer-check, concurrent verification and etc. Another important technique is to share work information among main control room (MCR) operators and field workers. Various field service automation tools have been developed with recent information technology in many countries. APR1400 computerized procedure system (CPS) has been developed for the MCR operators of Shin-Kori 3 and 4 units. Especially, the concurrent verification support design is applied in the construction project of Shin-Hanul 1 and 2 CPS. It is expected that the proposed mobile CPS can enhance the reduction of human errors by supporting human error prevention techniques and information sharing. This paper describes the technical issues of the mobile CPS (mobile CPS) in the initial development stage. Based on the design of APR1400, CRI CPS has been developed and operated for SKN 3 and 4 HFE V and V and license test for the MCR operating staff. Therefore the mobile CPS will be developed by upgrading the CRI CPS with improved features

A Development Method of Mobile Computerized Procedure System for the Cooperation among Field Workers and Main Control Room Operators in Korean Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Sun Jin; Seong, No Kyu; Jung, Yeon Sub [KHNP ,Daejeon (Korea, Republic of)

2014-08-15

Human errors can occur during the test and maintenance of steam generator, safety injection system and other various systems and devices in nuclear power plants (NPPs). Most of human errors can be improved by the human error prevention techniques such as self-check, peer-check, concurrent verification and etc. Another important technique is to share work information among main control room (MCR) operators and field workers. Various field service automation tools have been developed with recent information technology in many countries. APR1400 computerized procedure system (CPS) has been developed for the MCR operators of Shin-Kori 3 and 4 units. Especially, the concurrent verification support design is applied in the construction project of Shin-Hanul 1 and 2 CPS. It is expected that the proposed mobile CPS can enhance the reduction of human errors by supporting human error prevention techniques and information sharing. This paper describes the technical issues of the mobile CPS (mobile CPS) in the initial development stage. Based on the design of APR1400, CRI CPS has been developed and operated for SKN 3 and 4 HFE V and V and license test for the MCR operating staff. Therefore the mobile CPS will be developed by upgrading the CRI CPS with improved features.

Spatiotemporal Pattern of Crime Using Geographic Information System (GIS) Approach in Dala L.G.A of Kano State, Nigeria

OpenAIRE

M. Ahmed

2013-01-01

This study explores the use of Geographic Information Systems (GIS) and spatial database of crime characteristics which helps in the determination of hotspots in Dala LGA of Kano State and also it identifies the challenges facing police departments that seek to implement computerized crime mapping systems. Different data sources were used, data from the Nigerian Police Force ( Dala and Jakara Division) of 2008 – 2010. For this study, the crime was divided into four categories: offence against...

Diagnostic information management system for the evaluation of medical images

Energy Technology Data Exchange (ETDEWEB)

Higa, Toshiaki; Torizuka, Kanji; Minato, Kotaro; Komori, Masaru; Hirakawa, Akina

1985-04-01