Behavioral Economics and the Supplemental Nutrition Assistance Program:: Making the Healthy Choice the Easy Choice.

Science.gov (United States)

Ammerman, Alice S; Hartman, Terry; DeMarco, Molly M

2017-02-01

The Supplemental Nutrition Assistance Program (SNAP) serves as an important nutritional safety net program for many Americans. Given its aim to use traditional economic levers to provide access to food, the SNAP program includes minimal nutritional requirements and restrictions. As food choices are influenced by more than just economic constraints, behavioral economics may offer insights and tools for altering food purchases for SNAP users. This manuscript outlines behavioral economics strategies that have potential to encourage healthier food choices within the SNAP program. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Method to assist conception of collimators in nuclear medicine

International Nuclear Information System (INIS)

Gantet, P.; Esquerre, J.P.; Danet, B.; Roux, G.; Guiraud, R.

1990-01-01

Designing a collimator should begin by an accurate computation of its performances in order to minimize the usual expensive and time consuming phase of trial and error. The authors briefly describe several methods currently used, and present a method of simulation of the percussional response of collimators. The computation takes into account the attenuation of photons by the collimator septas. An other benefit is its ability to be used whatever the geometric specifications of the collimator. The program computes spatial resolution, geometric efficiency, septal penetration, as well as slice thickness when the collimator is used with a SPECT device. The study presents the results concerning two collimators: a general purpose parallel hole commercially available and a focused parallel one dedicated to a single slice SPECT system. In conclusion, this deterministic method which takes attenuation into account for collimators performances computation should be useful tool to assist conception of new collimators in nuclear medicine [fr

Center for Disaster & Humanitarian Assistance Medicine

Data.gov (United States)

Federal Laboratory Consortium — The Center for Disaster and Humanitarian Assistance Medicine (CDHAM) was formally established at the Uniformed Services University of the Health Sciences (USUHS) by...

Applied computing in medicine and health

CERN Document Server

Al-Jumeily, Dhiya; Mallucci, Conor; Oliver, Carol

2015-01-01

Applied Computing in Medicine and Health is a comprehensive presentation of on-going investigations into current applied computing challenges and advances, with a focus on a particular class of applications, primarily artificial intelligence methods and techniques in medicine and health. Applied computing is the use of practical computer science knowledge to enable use of the latest technology and techniques in a variety of different fields ranging from business to scientific research. One of the most important and relevant areas in applied computing is the use of artificial intelligence (AI) in health and medicine. Artificial intelligence in health and medicine (AIHM) is assuming the challenge of creating and distributing tools that can support medical doctors and specialists in new endeavors. The material included covers a wide variety of interdisciplinary perspectives concerning the theory and practice of applied computing in medicine, human biology, and health care. Particular attention is given to AI-bas...

Computer applications in nuclear medicine

International Nuclear Information System (INIS)

Lancaster, J.L.; Lasher, J.C.; Blumhardt, R.

1987-01-01

Digital computers were introduced to nuclear medicine research as an imaging modality in the mid-1960s. Widespread use of imaging computers (scintigraphic computers) was not seen in nuclear medicine clinics until the mid-1970s. For the user, the ability to acquire scintigraphic images into the computer for quantitative purposes, with accurate selection of regions of interest (ROIs), promised almost endless computational capabilities. Investigators quickly developed many new methods for quantitating the distribution patterns of radiopharmaceuticals within the body both spatially and temporally. The computer was used to acquire data on practically every organ that could be imaged by means of gamma cameras or rectilinear scanners. Methods of image processing borrowed from other disciplines were applied to scintigraphic computer images in an attempt to improve image quality. Image processing in nuclear medicine has evolved into a relatively extensive set of tasks that can be called on by the user to provide additional clinical information rather than to improve image quality. Digital computers are utilized in nuclear medicine departments for nonimaging applications also, Patient scheduling, archiving, radiopharmaceutical inventory, radioimmunoassay (RIA), and health physics are just a few of the areas in which the digital computer has proven helpful. The computer is useful in any area in which a large quantity of data needs to be accurately managed, especially over a long period of time

Computer-assisted instruction

NARCIS (Netherlands)

Voogt, J.; Fisser, P.; Wright, J.D.

2015-01-01

Since the early days of computer technology in education in the 1960s, it was claimed that computers can assist instructional practice and hence improve student learning. Since then computer technology has developed, and its potential for education has increased. In this article, we first discuss

Computational biomechanics for medicine imaging, modeling and computing

CERN Document Server

Doyle, Barry; Wittek, Adam; Nielsen, Poul; Miller, Karol

2016-01-01

The Computational Biomechanics for Medicine titles provide an opportunity for specialists in computational biomechanics to present their latest methodologies and advancements. This volume comprises eighteen of the newest approaches and applications of computational biomechanics, from researchers in Australia, New Zealand, USA, UK, Switzerland, Scotland, France and Russia. Some of the interesting topics discussed are: tailored computational models; traumatic brain injury; soft-tissue mechanics; medical image analysis; and clinically-relevant simulations. One of the greatest challenges facing the computational engineering community is to extend the success of computational mechanics to fields outside traditional engineering, in particular to biology, the biomedical sciences, and medicine. We hope the research presented within this book series will contribute to overcoming this grand challenge.

Computer-Assisted Learning in Anatomy at the International Medical School in Debrecen, Hungary: A Preliminary Report

Science.gov (United States)

Kish, Gary; Cook, Samuel A.; Kis, Greta

2013-01-01

The University of Debrecen's Faculty of Medicine has an international, multilingual student population with anatomy courses taught in English to all but Hungarian students. An elective computer-assisted gross anatomy course, the Computer Human Anatomy (CHA), has been taught in English at the Anatomy Department since 2008. This course focuses on an…

[Artificial intelligence to assist clinical diagnosis in medicine].

Science.gov (United States)

Lugo-Reyes, Saúl Oswaldo; Maldonado-Colín, Guadalupe; Murata, Chiharu

2014-01-01

Medicine is one of the fields of knowledge that would most benefit from a closer interaction with Computer studies and Mathematics by optimizing complex, imperfect processes such as differential diagnosis; this is the domain of Machine Learning, a branch of Artificial Intelligence that builds and studies systems capable of learning from a set of training data, in order to optimize classification and prediction processes. In Mexico during the last few years, progress has been made on the implementation of electronic clinical records, so that the National Institutes of Health already have accumulated a wealth of stored data. For those data to become knowledge, they need to be processed and analyzed through complex statistical methods, as it is already being done in other countries, employing: case-based reasoning, artificial neural networks, Bayesian classifiers, multivariate logistic regression, or support vector machines, among other methodologies; to assist the clinical diagnosis of acute appendicitis, breast cancer and chronic liver disease, among a wide array of maladies. In this review we shift through concepts, antecedents, current examples and methodologies of machine learning-assisted clinical diagnosis.

Interactive Computer Lessons for Introductory Economics: Guided Inquiry-From Supply and Demand to Women in the Economy.

Science.gov (United States)

Miller, John; Weil, Gordon

1986-01-01

The interactive feature of computers is used to incorporate a guided inquiry method of learning introductory economics, extending the Computer Assisted Instruction (CAI) method beyond drills. (Author/JDH)

Arrow physicians: are economics and medicine philosophically incompatible?

Science.gov (United States)

Tsang, Sandro

2015-06-01

Economics is en route to its further expansion in medicine, but many in the medical community remain unconvinced that its impact will be positive. Thus, a philosophical enquiry into the compatibility of economics and medicine is necessary to resolve the disagreements. The fundamental mission of medicine obliges physicians to practise science and compassion to serve the patient's best interests. Conventional (neoclassical) economics assumes that individuals are self-interested and that competitive markets will emerge optimal states. Economics is seemingly incompatible with the emphasis of putting patients' interests first. This idea is refuted by Professor Kenneth Arrow's health economics seminal paper. Arrow emphasizes that medical practice involves agency, knowledge, trust and professionalism, and physician-patient relation critically affects care quality. The term Arrow Physician is used to mean a humanistic carer who has a concern for the patient and acts on the best available evidence with health equity in mind. To make this practice sustainable, implementing appropriate motivations, constitutions and institutions to enable altruistic agency is critical. There is substantial evidence that polycentric governance can encourage building trust and reciprocity, so as to avoid depletion of communal resources. This paper proposes building trusting institutions through granting altruistic physicians adequate autonomy to direct resources based on patients' technical needs. It also summarizes the philosophy bases of medicine and economics. It, therefore, contributes to developing a shared language to facilitate intellectual dialogues, and will encourage trans-disciplinary research into medical practice. This should lead to medicine being reoriented to care for whole persons again. © 2015 John Wiley & Sons, Ltd.

CARS 2008: Computer Assisted Radiology and Surgery. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-06-15

The proceedings contain contributions to the following topics: digital imaging, computed tomography, magnetic resonance, cardiac and vascular imaging, computer assisted radiation therapy, image processing and display, minimal invasive spinal surgery, computer assisted treatment of the prostate, the interventional radiology suite of the future, interventional oncology, computer assisted neurosurgery, computer assisted head and neck and ENT surgery, cardiovascular surgery, computer assisted orthopedic surgery, image processing and visualization, surgical robotics, instrumentation and navigation, surgical modelling, simulation and education, endoscopy and related techniques, workflow and new concepts in surgery, research training group 1126: intelligent surgery, digital operating room, image distribution and integration strategies, regional PACS and telemedicine, PACS - beyond radiology and E-learning, workflow and standardization, breast CAD, thoracic CAD, abdominal CAD, brain CAD, orthodontics, dentofacial orthopedics and airways, imaging and treating temporomandibular joint conditions, maxillofacial cone beam CT, craniomaxillofacial image fusion and CBCT incidental findings, image guided craniomaxillofacial procedures, imaging as a biomarker for therapy response, computer aided diagnosis. The Poster sessions cover the topics computer aided surgery, Euro PACS meeting, computer assisted radiology, computer aided diagnosis and computer assisted radiology and surgery.

CARS 2008: Computer Assisted Radiology and Surgery. Proceedings

International Nuclear Information System (INIS)

2008-01-01

The proceedings contain contributions to the following topics: digital imaging, computed tomography, magnetic resonance, cardiac and vascular imaging, computer assisted radiation therapy, image processing and display, minimal invasive spinal surgery, computer assisted treatment of the prostate, the interventional radiology suite of the future, interventional oncology, computer assisted neurosurgery, computer assisted head and neck and ENT surgery, cardiovascular surgery, computer assisted orthopedic surgery, image processing and visualization, surgical robotics, instrumentation and navigation, surgical modelling, simulation and education, endoscopy and related techniques, workflow and new concepts in surgery, research training group 1126: intelligent surgery, digital operating room, image distribution and integration strategies, regional PACS and telemedicine, PACS - beyond radiology and E-learning, workflow and standardization, breast CAD, thoracic CAD, abdominal CAD, brain CAD, orthodontics, dentofacial orthopedics and airways, imaging and treating temporomandibular joint conditions, maxillofacial cone beam CT, craniomaxillofacial image fusion and CBCT incidental findings, image guided craniomaxillofacial procedures, imaging as a biomarker for therapy response, computer aided diagnosis. The Poster sessions cover the topics computer aided surgery, Euro PACS meeting, computer assisted radiology, computer aided diagnosis and computer assisted radiology and surgery

Computer-assisted intraoperative visualization of dental implants. Augmented reality in medicine

International Nuclear Information System (INIS)

Ploder, O.; Wagner, A.; Enislidis, G.; Ewers, R.

1995-01-01

In this paper, a recently developed computer-based dental implant positioning system with an image-to-tissue interface is presented. On a computer monitor or in a head-up display, planned implant positions and the implant drill are graphically superimposed on the patient's anatomy. Electromagnetic 3D sensors track all skull and jaw movements; their signal feedback to the workstation induces permanent real-time updating of the virtual graphics' position. An experimental study and a clinical case demonstrates the concept of the augmented reality environment - the physician can see the operating field and superimposed virtual structures, such as dental implants and surgical instruments, without loosing visual control of the operating field. Therefore, the operation system allows visualization of CT planned implantposition and the implementation of important anatomical structures. The presented method for the first time links preoperatively acquired radiologic data, planned implant location and intraoperative navigation assistance for orthotopic positioning of dental implants. (orig.) [de

Computer Assisted Language Learning. Routledge Studies in Computer Assisted Language Learning

Science.gov (United States)

Pennington, Martha

2011-01-01

Computer-assisted language learning (CALL) is an approach to language teaching and learning in which computer technology is used as an aid to the presentation, reinforcement and assessment of material to be learned, usually including a substantial interactive element. This books provides an up-to date and comprehensive overview of…

Artificial Intelligence to Assist Clinical Diagnosis in Medicine

Directory of Open Access Journals (Sweden)

Saúl Oswaldo Lugo-Reyes

2014-03-01

Full Text Available Medicine is one of the elds of knowledge that would most bene t from a closer interaction with Computer studies and Mathematics by optimizing complex, imperfect processes such as differential diagnosis; this is the domain of Machine Learning, a branch of Arti cial Intelligence that builds and studies systems capable of learning from a set of training data, in order to optimize classi cation and prediction processes. In Mexico during the last few years, progress has been made on the implementation of electronic clinical records, so that the National Institutes of Health already have accumulated a wealth of stored data. For those data to become knowledge, they need to be processed and analyzed through complex statistical methods, as it is already being done in other countries, employing: case-based reasoning, artificial neural networks, Bayesian classi ers, multivariate logistic regression, or support vector machines, among other methodologies; to assist the clinical diagnosis of acute appendicitis, breast cancer and chronic liver disease, among a wide array of maladies. In this review we sift through concepts, antecedents, current examples and methodologies of machine learning-assisted clinical diagnosis.

Computers for use in nuclear medicine

International Nuclear Information System (INIS)

Surova, H.

1991-01-01

Brief information is presented on computers for nuclear medicine that are currently available on the market. The treatment is based on print material by various manufacturers and commercial organizations and on the publication ''Nuclear Medicine Computers - A Personal Comparison Chart'' of May 1991, issued by the Reilly Publishing Company. (Z.S.)

Economic analysis of bedside ultrasonography (US) implementation in an Internal Medicine department.

Science.gov (United States)

Testa, Americo; Francesconi, Andrea; Giannuzzi, Rosangela; Berardi, Silvia; Sbraccia, Paolo

2015-12-01

The economic crisis, the growing healthcare demand, and Defensive Medicine wastefulness, strongly recommend the restructuring of the entire medical network. New health technology, such as bedside ultrasonography, might successfully integrate the clinical approach optimizing the use of limited resources, especially in a person-oriented vision of medicine. Bedside ultrasonography is a safe and reliable technique, with worldwide expanding employment in various clinical settings, being considered as "the stethoscope of the 21st century". However, at present, bedside ultrasonography lacks economic analysis. We performed a Cost-Benefit Analysis "ex ante", with a break-even point computing, of bedside ultrasonography implementation in an Internal Medicine department in the mid-term. Number and kind estimation of bedside ultrasonographic studies were obtained by a retrospective study, whose data results were applied to the next 3-year period (foresight study). All 1980 foreseen bedside examinations, with prevailing multiorgan ultrasonographic studies, were considered to calculate direct and indirect costs, while specific and generic revenues were considered only after the first semester. Physician professional training, equipment purchase and working time represented the main fixed and variable cost items. DRG increase/appropriateness, hospitalization stay shortening and reduction of traditional ultrasonography examination requests mainly impacted on calculated revenues. The break-even point, i.e. the volume of activity at which revenues exactly equal total incurred costs, was calculated to be 734 US examinations, corresponding to € 81,998 and the time considered necessary to reach it resulting 406 days. Our economic analysis clearly shows that bedside ultrasonography implementation in clinical daily management of an Internal Medicine department can produce consistent savings, or economic profit according to managerial choices (i.e., considering public or private targets

13 CFR 307.3 - Use of Economic Adjustment Assistance Investments.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Use of Economic Adjustment Assistance Investments. 307.3 Section 307.3 Business Credit and Assistance ECONOMIC DEVELOPMENT... “Strategy Grant”), or to fund a Project implementing such a CEDS (an “Implementation Grant”). (a) Strategy...

13 CFR 307.6 - Economic Adjustment Assistance post-approval requirements.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Economic Adjustment Assistance post-approval requirements. 307.6 Section 307.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... § 302.18 of this chapter: (a) Strategy Grants shall comply with the applicable provisions of part 303 of...

Computers in nuclear medicine: introductory concepts

International Nuclear Information System (INIS)

Weber, D.A.

1978-01-01

Computers play an important role in image and data processing in nuclear medicine. Applications extend from relatively simple mathematical processing of in vitro specimen assays to more sophisticated image reconstruction procedures for emission tomography. The basic concepts and terminology associated with computer applications in image and data processing in nuclear medicine are presented here

Computer Assisted Instruction

Science.gov (United States)

Higgins, Paul

1976-01-01

Methodology for developing a computer assisted instruction (CAI) lesson (scripting, programing, and testing) is reviewed. A project done by Informatics Education Ltd. (IEL) for the Department of National Defense (DND) is used as an example. (JT)

Computer assisted radiology

International Nuclear Information System (INIS)

Lemke, H.U.; Rhodes, M.L.; Jaffee, C.C.; Felix, R.

1987-01-01

The organization of the book follows the plan of the meeting, with chapters representing the general meeting sessions and articles representing the meeting presentations. These are grouped by modality or kindred application, where relevant. Some sessions are not similarly divided and individual papers are positioned, presumably, in order of presentation. Each section labeled workshop addresses a specific topic. The first session is on digital image generation and contains sections on magnetic resonance imaging, nuclear medicine, computed tomography, ultrasound, digital radiography, and digital subtraction and angiography. The remaining sections are on application programming, picture archiving and communications systems, computer graphics, and computer vision

Voluntary euthanasia, physician-assisted suicide, and the goals of medicine.

Science.gov (United States)

Varelius, Jukka

2006-04-01

It is plausible that what possible courses of action patients may legitimately expect their physicians to take is ultimately determined by what medicine as a profession is supposed to do and, consequently, that we can determine the moral acceptability of voluntary euthanasia and physician-assisted suicide on the basis of identifying the proper goals of medicine. This article examines the main ways of defining the proper goals of medicine found in the recent bioethics literature and argues that they cannot provide a clear answer to the question of whether or not voluntary euthanasia and physician-assisted suicide are morally acceptable. It is suggested that to find a plausible answer to this question and to complete the task of defining the proper goals of medicine, we must determine what is the best philosophical theory about the nature of prudential value.

[Computer-assisted temporomandibular joint reconstruction.

Science.gov (United States)

Zwetyenga, N; Mommers, X-A; Cheynet, F

2013-08-02

Prosthetic replacement of TMJ is gradually becoming a common procedure because of good functional and aesthetic results and low morbidity. Prosthetic models available can be standard or custom-made. Custom-made prosthesis are usually reserved for complex cases, but we think that computer assistance for custom-made prosthesis should be indicated for each case because it gives a greater implant stability and fewer complications. Computer assistance will further enlarge TMJ prosthesis replacement indications. Copyright © 2013. Published by Elsevier Masson SAS.

Early Childhood Teacher Candidates\\' Attitudes towards Computer and Computer Assisted Instruction

OpenAIRE

Oğuz, Evrim; Ellez, A. Murat; Akamca, Güzin Özyılmaz; Kesercioğlu, Teoman İ.; Girgin, Günseli

2011-01-01

The aim of this research is to evaluate preschool candidates’ attitudes towards computers andattitudes towards use of computer assisted instruction. The sample of this study includes 481 early childhoodeducation students who attended Dokuz Eylül University’s department of Early Childhood Education. Data werecollected by using “Scale of Computer Assisted Instruction Attitudes” developed by the Arslan (2006),“Computer Attitudes Scale” developed by Çelik & Bindak (2005) and “General Info...

Effects of computer-assisted oral anticoagulant therapy

DEFF Research Database (Denmark)

Rasmussen, Rune Skovgaard; Corell, Pernille; Madsen, Poul

2012-01-01

: Patients randomized to computer-assisted anticoagulation and the CoaguChek® system reached the therapeutic target range after 8 days compared to 14 days by prescriptions from physicians (p = 0.04). Time spent in the therapeutic target range did not differ between groups. The median INR value measured...... prescribed by physicians, and the total time spent within the therapeutic target range was similar. Thus computer-assisted oral anticoagulant therapy may reduce the cost of anticoagulation therapy without lowering the quality. INR values measured by CoaguChek® were reliable compared to measurements......UNLABELLED: BACKGROUND: Computer-assistance and self-monitoring lower the cost and may improve the quality of anticoagulation therapy. The main purpose of this clinical investigation was to use computer-assisted oral anticoagulant therapy to improve the time to reach and the time spent within...

Computer-Assisted Linguistic Analysis of the Peshitta

NARCIS (Netherlands)

Roorda, D.; Talstra, Eep; Dyk, Janet; van Keulen, Percy; Sikkel, Constantijn; Bosman, H.J.; Jenner, K.D.; Bakker, Dirk; Volkmer, J.A.; Gutman, Ariel; van Peursen, Wido Th.

2014-01-01

CALAP (Computer-Assisted Linguistic Analysis of the Peshitta), a joint research project of the Peshitta Institute Leiden and the Werkgroep Informatica at the Vrije Universiteit Amsterdam (1999-2005) CALAP concerned the computer-assisted analysis of the Peshitta to Kings (Janet Dyk and Percy van

Experiences Providing Medical Assistance during the Sewol Ferry Disaster Using Traditional Korean Medicine.

Science.gov (United States)

Kim, Kyeong Han; Jang, Soobin; Lee, Ju Ah; Jang, Bo-Hyoung; Go, Ho-Yeon; Park, Sunju; Jo, Hee-Guen; Lee, Myeong Soo; Ko, Seong-Gyu

2017-01-01

This study aimed to investigate medical records using traditional Korean medicine (TKM) in Sewol Ferry disaster in 2014 and further explore the possible role of traditional medicine in disaster situation. After Sewol Ferry accident, 3 on-site tents for TKM assistance by the Association of Korean Medicine (AKOM) in Jindo area were installed. The AKOM mobilized volunteer TKM doctors and assistants and dispatched each on-site tent in three shifts within 24 hours. Anyone could use on-site tent without restriction and TKM treatments including herb medicine were administered individually. The total of 1,860 patients were treated during the periods except for medical assistance on the barge. Most patients were diagnosed in musculoskeletal diseases (66.4%) and respiratory diseases (7.4%) and circulatory diseases (8.4%) followed. The most frequently used herbal medicines were Shuanghe decoction (80 days), Su He Xiang Wan (288 pills), and Wuji powder (73 days). TKM in medical assistance can be helpful to rescue worker or group life people in open shelter when national disasters occur. Therefore, it is important to construct a rapid respond system using TKM resources based on experience.

Experiences Providing Medical Assistance during the Sewol Ferry Disaster Using Traditional Korean Medicine

Directory of Open Access Journals (Sweden)

Kyeong Han Kim

2017-01-01

Full Text Available Background. This study aimed to investigate medical records using traditional Korean medicine (TKM in Sewol Ferry disaster in 2014 and further explore the possible role of traditional medicine in disaster situation. Methods. After Sewol Ferry accident, 3 on-site tents for TKM assistance by the Association of Korean Medicine (AKOM in Jindo area were installed. The AKOM mobilized volunteer TKM doctors and assistants and dispatched each on-site tent in three shifts within 24 hours. Anyone could use on-site tent without restriction and TKM treatments including herb medicine were administered individually. Results. The total of 1,860 patients were treated during the periods except for medical assistance on the barge. Most patients were diagnosed in musculoskeletal diseases (66.4% and respiratory diseases (7.4% and circulatory diseases (8.4% followed. The most frequently used herbal medicines were Shuanghe decoction (80 days, Su He Xiang Wan (288 pills, and Wuji powder (73 days. Conclusions. TKM in medical assistance can be helpful to rescue worker or group life people in open shelter when national disasters occur. Therefore, it is important to construct a rapid respond system using TKM resources based on experience.

Economic evaluation studies in nuclear medicine. A methodological review of the literature

International Nuclear Information System (INIS)

Gambhir, S.S.; Schwimmer, J.

2000-01-01

The growing need for evaluation of the utility of new nuclear medicine technologies has spawned a few economic studies ranging from preliminary indications of cost savings to complete decision analysis models incorporating costs and quality of life. The objective of the current study was to evaluate the methodological quality of economic analyses of nuclear medicine procedures which targeted cost-effectiveness or cost-utility issues published in the medical literature during the years 1985-1999. A computerized literature search was used to identify original investigations from the medical literature which included an economic analysis of a nuclear medicine procedure. Each economic analysis article was evaluated by two independent reviewers for adherence to ten accepted methodological criteria. Of the 29 articles meeting the search criteria, only six (21%) conformed to all ten methodological criteria. Published economic analyses of nuclear medicine procedures usually do not meet accepted methodological standards and could be significantly improved to achieve overall better quality relative to similar analyses in the literature from other medical fields. Continued improvement in the number and quality of economic studies is critically needed for the future competitiveness of nuclear medicine studies

Computers. A perspective on their usefulness in nuclear medicine

International Nuclear Information System (INIS)

Loken, M.K.; Williams, L.E.; Ponto, R.A.; Ganatra, R.D.; Raikar, U.; Samuel, A.M.

1977-01-01

To date, many symposia have been held on computer applications in nuclear medicine. Despite all of these efforts, an appraisal of the true utility of computers in the day-to-day practice of nuclear medicine is yet to be achieved. Now that the technology of data storage and processing in nuclear medicine has reached a high degree of sophistication, as evidenced by many reports in the literature, the time has come to develop a perspective on the proper place of computers in nuclear medicine practice. The paper summarizes various uses of a dedicated computer (Nuclear Data Med II) at our two institutions and comments on its clinical utility. (author)

Experiences Providing Medical Assistance during the Sewol Ferry Disaster Using Traditional Korean Medicine

OpenAIRE

Kim, Kyeong Han; Jang, Soobin; Lee, Ju Ah; Jang, Bo-Hyoung; Go, Ho-Yeon; Park, Sunju; Jo, Hee-Guen; Lee, Myeong Soo; Ko, Seong-Gyu

2017-01-01

Background. This study aimed to investigate medical records using traditional Korean medicine (TKM) in Sewol Ferry disaster in 2014 and further explore the possible role of traditional medicine in disaster situation. Methods. After Sewol Ferry accident, 3 on-site tents for TKM assistance by the Association of Korean Medicine (AKOM) in Jindo area were installed. The AKOM mobilized volunteer TKM doctors and assistants and dispatched each on-site tent in three shifts within 24 hours. Anyone coul...

Computer Assisted Advising Tool (CAAT).

Science.gov (United States)

Matsen, Marie E.

Lane Community College's Computer Assisted Advising Tool (CAAT) is used by counselors to assist students in developing a plan for the completion of a degree or certificate. CAAT was designed to facilitate student advisement from matriculation to graduation by comparing degree requirements with the courses completed by students. Three major sources…

Computer game assisted instruction and students' achievement in ...

African Journals Online (AJOL)

Computer game assisted instruction and students' achievement in social studies. ... This paper examines the effects of computer game assisted instructional method, student's achievement in social studies in ... AJOL African Journals Online.

“What Goes Around Comes Around”: Lessons Learned from Economic Evaluations of Personalized Medicine Applied to Digital Medicine

Science.gov (United States)

Phillips, Kathryn A.; Douglas, Michael P.; Trosman, Julia R.; Marshall, Deborah A.

2016-01-01

Two key trends that emerge from the growth of “Big Data” and the emphasis on patient-centered healthcare are the increasing use of personalized medicine and digital medicine. In order for these technologies to move into mainstream health care and be reimbursed by insurers, it will be essential to have evidence that their benefits provide reasonable value relative to their costs. However, these technologies have complex characteristics that present challenges to assessment of their economic value. Previous work has identified these challenges for personalized medicine and thus this work can inform the more nascent topic of digital medicine. Our objective is to examine the methodological challenges and future opportunities for assessing the economic value of digital medicine, using personalized medicine as a comparison. We focus specifically on “digital biomarker technologies” and “multigene tests”. We identified similarities in these technologies that can present challenges to economic evaluation: multiple results, results with different types of utilities, secondary findings, downstream impact (including on family members), and interactive effects. Using a structured review, we found that there are few economic evaluations of digital biomarker technologies, with limited results. We conclude that more evidence on effectiveness of digital medicine will be needed but that the experiences with personalized medicine can inform what data will be needed and how such analyses can be conducted. Our study points out the critical need for typologies and terminology for digital medicine technologies that would enable them to be classified in ways that will facilitate research on their effectiveness and value. PMID:28212968

Student Study Choices in the Principles of Economics: A Case Study of Computer Usage

OpenAIRE

Grimes, Paul W.; Sanderson, Patricia L.; Ching, Geok H.

1996-01-01

Principles of Economics students at Mississippi State University were provided the opportunity to use computer assisted instruction (CAI) as a supplemental study activity. Students were free to choose the extent of their computer work. Throughout the course, weekly surveys were conducted to monitor the time each student spent with their textbook, computerized tutorials, workbook, class notes, and study groups. The surveys indicated that only a minority of the students actively pursued CAI....

Economic importance and GIS mapping of medicinal plants in Iran ...

African Journals Online (AJOL)

This study identified the economic importance of medicinal plants and evaluated with Geographical Information System (GIS) tool to develop spatial maps covering medicinal plants prevalent in Darkesh area, Northern Khorasan, Iran. Then provide the coordinates of the identified area as your results. 10 medicinal plants ...

Computer-Assisted Discovery and Proof

Energy Technology Data Exchange (ETDEWEB)

Bailey, David H.; Borwein, Jonathan M.

2007-12-10

With the advent of powerful, widely-available mathematical software, combined with ever-faster computer hardware, we are approaching a day when both the discovery and proof of mathematical facts can be done in a computer-assisted manner. his article presents several specific examples of this new paradigm in action.

Evaluation of Computer-Assisted Instruction in Principles of Economics

Directory of Open Access Journals (Sweden)

Dennis Coates

2001-04-01

Full Text Available Despite increasing use, little is known about the effectiveness of web-based instructional material. This study assesses the effectiveness of supplementary web-based materials and activities in introductory economics courses. We have collected data on 66 students from three principles sections that describe demographic characteristics, use of web-based instructional resources, and performance on graded quizzes and examinations. We use this data to statistically assess the effectiveness of the web-based material. Student utilization of web-based material was extensive. Students frequently used on-line practice quizzes and accessed the web-based material often. A sizable fraction of the students actively posted and read threaded discussions on the course bulletin board. The statistical analysis shows that both on-line computer graded practice quizzes and posting to the class bulletin board are positively correlated with student performance on the quizzes and exams, but use of web-based content and passive reading of bulletin board posts ("lurking" is not. These results suggest that faculty should focus more on developing self-test quizzes and effective bulletin board discussion projects and less on generating on-line content.

Economic evaluation studies in reproductive medicine: a systematic review of methodologic quality

NARCIS (Netherlands)

Moolenaar, Lobke M.; Vijgen, Sylvia M. C.; Hompes, Peter; van der Veen, Fulco; Mol, Ben Willem J.; Opmeer, Brent C.

2013-01-01

To evaluate the methodologic quality of economic analyses published in the field of reproductive medicine. Systematic review. Centers for reproductive care. Infertility patients. We performed a Medline search to identify economic evaluation studies in reproductive medicine. We included studies that

[Advancements of computer chemistry in separation of Chinese medicine].

Science.gov (United States)

Li, Lingjuan; Hong, Hong; Xu, Xuesong; Guo, Liwei

2011-12-01

Separating technique of Chinese medicine is not only a key technique in the field of Chinese medicine' s research and development, but also a significant step in the modernization of Chinese medicinal preparation. Computer chemistry can build model and look for the regulations from Chinese medicine system which is full of complicated data. This paper analyzed the applicability, key technology, basic mode and common algorithm of computer chemistry applied in the separation of Chinese medicine, introduced the mathematic mode and the setting methods of Extraction kinetics, investigated several problems which based on traditional Chinese medicine membrane procession, and forecasted the application prospect.

Computer-assisted learning in anatomy at the international medical school in Debrecen, Hungary: a preliminary report.

Science.gov (United States)

Kish, Gary; Cook, Samuel A; Kis, Gréta

2013-01-01

The University of Debrecen's Faculty of Medicine has an international, multilingual student population with anatomy courses taught in English to all but Hungarian students. An elective computer-assisted gross anatomy course, the Computer Human Anatomy (CHA), has been taught in English at the Anatomy Department since 2008. This course focuses on an introduction to anatomical digital images along with clinical cases. This low-budget course has a large visual component using images from magnetic resonance imaging and computer axial tomogram scans, ultrasound clinical studies, and readily available anatomy software that presents topics which run in parallel to the university's core anatomy curriculum. From the combined computer images and CHA lecture information, students are asked to solve computer-based clinical anatomy problems in the CHA computer laboratory. A statistical comparison was undertaken of core anatomy oral examination performances of English program first-year medical students who took the elective CHA course and those who did not in the three academic years 2007-2008, 2008-2009, and 2009-2010. The results of this study indicate that the CHA-enrolled students improved their performance on required anatomy core curriculum oral examinations (P computer-assisted learning may play an active role in anatomy curriculum improvement. These preliminary results have prompted ongoing evaluation of what specific aspects of CHA are valuable and which students benefit from computer-assisted learning in a multilingual and diverse cultural environment. Copyright © 2012 American Association of Anatomists.

Use of computers and the Internet by residents in US family medicine programmes.

Science.gov (United States)

King, Richard V; Murphy-Cullen, Cassie L; Mayo, Helen G; Marcee, Alice K; Schneider, Gregory W

2007-06-01

Computers, personal digital assistants (PDA), and the Internet are widely used as resources in medical education and clinical care. Educators who intend to incorporate these resources effectively into residency education programmes can benefit from understanding how residents currently use these tools, their skills, and their preferences. The researchers sent questionnaires to 306 US family medicine residency programmes for all of their residents to complete. Respondents were 1177 residents from 125 (41%) programmes. Access to a computer was reported by 95% of respondents. Of these, 97% of desktop and 89% of laptop computers could access the Internet. Residents accessed various educational and clinical resources. Half felt they had 'intermediate' skills at Web searches, 23% had 'some skills,' and 27% were 'quite skilled.' Those under 30 years of age reported higher skill levels. Those who experienced a Web-based curriculum in medical school reported higher search skills and greater success in finding clinical information. Respondents preferred to use technology to supplement the didactic sessions offered in resident teaching conferences. Favourable conditions exist in family medicine residency programmes to implement a blend of traditional and technology-based learning experiences. These conditions include residents' experience, skills, and preferences.

Does economic incentive matter for rational use of medicine? China's experience from the essential medicines program.

Science.gov (United States)

Chen, Mingsheng; Wang, Lijie; Chen, Wen; Zhang, Luying; Jiang, Hongli; Mao, Wenhui

2014-03-01

Before the new round of healthcare reform in China, primary healthcare providers could obtain a fixed 15 % or greater mark-up of profits by prescribing and selling medicines. There were concerns that this perverse incentive was a key cause of irrational medicine use. China's new Essential Medicines Program (EMP) was launched in 2009 as part of the national health sector reform initiatives. One of its core policies was to eliminate primary care providers' economic incentives to overprescribe or prescribe unnecessarily expensive drugs, which were regarded as consequences of China's traditional financing system for health institutions. The objective of the study was to measure changes in prescribing patterns in primary healthcare facilities after the removal of the economic incentives for physicians to overprescribe as a result of the implementation of the EMP. A comparison design was applied to 8,258 prescriptions in 2007 and 8,278 prescriptions in 2010, from 83 primary healthcare facilities nationwide. Indicators were adopted to evaluate medicine utilization, which included overall number of medicines, average number of Western and traditional Chinese medicines, pharmaceutical expenditure per outpatient prescription, and proportion of prescriptions that contained two or more antibiotics. We further assessed the use of medicines (antibiotics, infusion, hormones, and intravenous injection) per disease-specific prescription for hypertension, diabetes, coronary artery heart disease, bronchitis, upper respiratory tract infection, and gastritis. A difference-in-difference analysis was employed to evaluate the net policy effect. Overall changes in indicators were not found to be statistically significant between the 2 years. The results varied for different diseases. The number of Western drugs per outpatient prescription decreased while that of traditional Chinese medicines increased. Overuse of antibiotics remained an extensive problem in the treatment of many diseases

Computer-assisted design/computer-assisted manufacturing systems: A revolution in restorative dentistry

Directory of Open Access Journals (Sweden)

Arbaz Sajjad

2016-01-01

Full Text Available For the better part of the past 20 years, dentistry has seen the development of many new all-ceramic materials and restorative techniques fueled by the desire to capture the ever elusive esthetic perfection. This has resulted in the fusion of the latest in material science and the pen ultimate in computer-assisted design/computer-assisted manufacturing (CAD/CAM technology. This case report describes the procedure for restoring the esthetic appearance of both the left and right maxillary peg-shaped lateral incisors with a metal-free sintered finely structured feldspar ceramic material using the latest laboratory CAD/CAM system. The use of CAD/CAM technology makes it possible to produce restorations faster with precision- fit and good esthetics overcoming the errors associated with traditional ceramo-metal technology. The incorporation of this treatment modality would mean that the dentist working procedures will have to be adapted in the methods of CAD/CAM technology.

A methodological framework of preparing economic evidence for selection of medicines in the Chinese setting.

Science.gov (United States)

Sun, Xin; Faunce, Thomas Alured

2010-08-01

Medicines are becoming a major component of health expenditure in China. Selection of effective and cost-effective medicines represents an important effort to improve medicines use. A guideline on cost-effectiveness studies has been available in China. This guideline, however, fails to be a practical tool to prepare and critically appraise economic evidence. This article discusses, in the Chinese context, the approach to integrating economic component into the medicines selection, and elaborates the methods of producing economic evidence, including conducing economic reviews and primary economic studies. © 2010 Blackwell Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

Computer-assisted nuclear fuel manufacture

International Nuclear Information System (INIS)

Maloney, J.P.; Schaumann, S.M.; Stone, E.

1976-01-01

At the ERDA Savannah River Plant, a process monitor, which incorporates an online digital computer, assists in manufacturing fuel elements used to produce nuclides such as plutonium, tritium, and californium in the plant's nuclear reactors. Also, inventory functions assist in safeguarding fissile material and protecting against accidental nuclear criticality. Terminals at strategic locations throughout the process area enable production operators to send and receive instructions and information on each manufacturing step

Computer-assisted nuclear fuel manufacture

International Nuclear Information System (INIS)

Maloney, J.P.; Schaumann, C.M.; Stone, E.

1976-06-01

At the ERDA Savannah River Plant, a process monitor, which incorporates an online digital computer, assists in manufacturing fuel elements used to produce nuclides such as plutonium, tritium, and californium in the plant's nuclear reactors. Also, inventory functions assist in safeguarding fissile material and protecting against accidental nuclear criticality. Terminals at strategic locations throughout the process area enable production operators to send and receive instructions and information on each manufacturing step. 11 fig

Economic aspects of radionuclide production for nuclear medicine

International Nuclear Information System (INIS)

Le Gallic, Y.; Prospert, J.

1980-03-01

In a difficult economic situation it was considered advisable to inform users of certain financial aspects of radionuclide production for nuclear medicine. Two aspects of this vast and many-sided problem are developed here: - The cost price structure of different products (radiopharmaceutical and radioimmunological) which defines the size of the market consistent with a balanced budget. This aspect of the economic analysis seems all the more important as ORIS, although a non profit-making organization, has to balance its production costs. - The effects on the national economy of the nuclear medicine supply market. From this viewpoint it seemed interesting to examine the share-out of the French market between ORIS which is practically the only national producer and importers, as well as the balance of payments situation in this respect [fr

Competency Reference for Computer Assisted Drafting.

Science.gov (United States)

Oregon State Dept. of Education, Salem. Div. of Vocational Technical Education.

This guide, developed in Oregon, lists competencies essential for students in computer-assisted drafting (CAD). Competencies are organized in eight categories: computer hardware, file usage and manipulation, basic drafting techniques, mechanical drafting, specialty disciplines, three dimensional drawing/design, plotting/printing, and advanced CAD.…

Affective medicine. A review of affective computing efforts in medical informatics.

Science.gov (United States)

Luneski, A; Konstantinidis, E; Bamidis, P D

2010-01-01

Affective computing (AC) is concerned with emotional interactions performed with and through computers. It is defined as "computing that relates to, arises from, or deliberately influences emotions". AC enables investigation and understanding of the relation between human emotions and health as well as application of assistive and useful technologies in the medical domain. 1) To review the general state of the art in AC and its applications in medicine, and 2) to establish synergies between the research communities of AC and medical informatics. Aspects related to the human affective state as a determinant of the human health are discussed, coupled with an illustration of significant AC research and related literature output. Moreover, affective communication channels are described and their range of application fields is explored through illustrative examples. The presented conferences, European research projects and research publications illustrate the recent increase of interest in the AC area by the medical community. Tele-home healthcare, AmI, ubiquitous monitoring, e-learning and virtual communities with emotionally expressive characters for elderly or impaired people are few areas where the potential of AC has been realized and applications have emerged. A number of gaps can potentially be overcome through the synergy of AC and medical informatics. The application of AC technologies parallels the advancement of the existing state of the art and the introduction of new methods. The amount of work and projects reviewed in this paper witness an ambitious and optimistic synergetic future of the affective medicine field.

Broadcast Copywriting and Computer Assisted Instruction.

Science.gov (United States)

Hagerman, William L.

The teaching of broadcast copywriting can be enhanced by computer assisted instruction, especially in screening students' writing for adherence to classic "formulas" or "rules" for broadcast writing. Such rules might include avoiding cliches or not beginning a sentence with a subordinate clause. Other rules the computer can…

Computers in nuclear medicine - current trends and future directions

International Nuclear Information System (INIS)

Anon.

1994-01-01

Previously, a decision to purchase computing equipment for nuclear medicine usually required evaluation of the 'local' needs. With the advent of Pacs and state of the art computer techniques for image acquisition and manipulation, purchase and subsequent application is to become much more complex. Some of the current trends and future possibilities which may influence the choice and operation of computers within and outside the nuclear medicine environment is discussed. (author)

Computer assisted pyeloplasty in children the retroperitoneal approach

DEFF Research Database (Denmark)

Olsen, L H; Jorgensen, T M

2004-01-01

PURPOSE: We describe the first series of computer assisted retroperitoneoscopic pyeloplasty in children using the Da Vinci Surgical System (Intuitive Surgical, Inc., Mountainview, California) with regard to setup, method, operation time, complications and preliminary outcome. The small space...... with the Da Vinci Surgical System. With the patient in a lateral semiprone position the retroperitoneal space was developed by blunt and balloon dissection. Three ports were placed for the computer assisted system and 1 for assistance. Pyeloplasty was performed with the mounted system placed behind...

Computer-assisted instruction: a library service for the community teaching hospital.

Science.gov (United States)

McCorkel, J; Cook, V

1986-04-01

This paper reports on five years of experience with computer-assisted instruction (CAI) at Winthrop-University Hospital, a major affiliate of the SUNY at Stony Brook School of Medicine. It compares CAI programs available from Ohio State University and Massachusetts General Hospital (accessed by telephone and modem), and software packages purchased from the Health Sciences Consortium (MED-CAPS) and Scientific American (DISCOTEST). The comparison documents one library's experience of the cost of these programs and the use made of them by medical students, house staff, and attending physicians. It describes the space allocated for necessary equipment, as well as the marketing of CAI. Finally, in view of the decision of the National Board of Medical Examiners to administer the Part III examination on computer (the so-called CBX) starting in 1988, the paper speculates on the future importance of CAI in the community teaching hospital.

[Computer-assisted analysis of the results of training in internal medicine].

Science.gov (United States)

Vrbová, H; Spunda, M

1991-06-01

Analysis of the results of teaching of clinical disciplines has in the long run an impact on the standard and value of medical care. It requires processing of quantitative and qualitative data. The selection of indicators which will be followed up and procedures used for their processing are of fundamental importance. The submitted investigation is an example how to use possibilities to process results of effectiveness analysis in teaching internal medicine by means of computer technique. As an indicator of effectiveness the authors selected the percentage of students who had an opportunity during the given period of their studies to observe a certain pathological condition, and as method of data collection a survey by means of questionnaires was used. The task permits to differentiate the students' experience (whether the student examined the patient himself or whether the patient was only demonstrated) and it makes it possible to differentiate the place of observation (at the university teaching hospital or regional non-teaching hospital attachment). The task permits also to form sub-groups of respondents to combine them as desired and to compare their results. The described computer programme support comprises primary processing of the output of the questionnaire survey. The questionnaires are transformed and stored by groups of respondents in data files of suitable format (programme SDFORM); the processing of results is described as well as their presentation as output listing or on the display in the interactive way (SDRESULT programme). Using the above programmes, the authors processed the results of a survey made among students during and after completion of the studies in a series of 70 recommended pathological conditions. As an example the authors compare results of observations in 20 selected pathological conditions important for the diagnosis and therapy in primary care in the final stage of the medical course in 1981 and 1985.

Computer assisted holographic moire contouring

Science.gov (United States)

Sciammarella, Cesar A.

2000-01-01

Theoretical analyses and experimental results on holographic moire contouring on diffusely reflecting objects are presented. The sensitivity and limitations of the method are discussed. Particular emphasis is put on computer-assisted data retrieval, processing, and recording.

Medical Computational Thinking

DEFF Research Database (Denmark)

Musaeus, Peter; Tatar, Deborah Gail; Rosen, Michael A.

2017-01-01

Computational thinking (CT) in medicine means deliberating when to pursue computer-mediated solutions to medical problems and evaluating when such solutions are worth pursuing in order to assist in medical decision making. Teaching computational thinking (CT) at medical school should be aligned...

Computer assisted diagnosis in renal nuclear medicine: rationale, methodology and interpretative criteria for diuretic renography

Science.gov (United States)

Taylor, Andrew T; Garcia, Ernest V

2014-01-01

The goal of artificial intelligence, expert systems, decision support systems and computer assisted diagnosis (CAD) in imaging is the development and implementation of software to assist in the detection and evaluation of abnormalities, to alert physicians to cognitive biases, to reduce intra and inter-observer variability and to facilitate the interpretation of studies at a faster rate and with a higher level of accuracy. These developments are needed to meet the challenges resulting from a rapid increase in the volume of diagnostic imaging studies coupled with a concurrent increase in the number and complexity of images in each patient data. The convergence of an expanding knowledge base and escalating time constraints increases the likelihood of physician errors. Errors are even more likely when physicians interpret low volume studies such as 99mTc-MAG3 diuretic scans where imagers may have had limited training or experience. Decision support systems include neural networks, case-based reasoning, expert systems and statistical systems. iRENEX (renal expert) is an expert system for diuretic renography that uses a set of rules obtained from human experts to analyze a knowledge base of both clinical parameters and quantitative parameters derived from the renogram. Initial studies have shown that the interpretations provided by iRENEX are comparable to the interpretations of a panel of experts. iRENEX provides immediate patient specific feedback at the time of scan interpretation, can be queried to provide the reasons for its conclusions and can be used as an educational tool to teach trainees to better interpret renal scans. iRENEX also has the capacity to populate a structured reporting module and generate a clear and concise impression based on the elements contained in the report; adherence to the procedural and data entry components of the structured reporting module assures and documents procedural competency. Finally, although the focus is CAD applied to

Defibrotide in Severe Sinusoidal Obstruction Syndrome: Medicine and Economic Issues.

Science.gov (United States)

Steelandt, Julie; Bocquet, François; Cordonnier, Anne-Laure; De Courtivron, Charlotte; Fusier, Isabelle; Paubel, Pascal

2017-02-01

In Europe, Defitelio (defibrotide) has a Market Authorization in curative treatment of severe sinusoidal obstruction syndrome (SOS) but not in prophylaxis (2013). In France, defibrotide has had a compassionate-use program since 2009. Today, the high cost of defibrotide remains a major hurdle for hospital budgets. Medicine and economic issues were evaluated for the 39 hospitals of the French Public Assistance-Hospitals of Paris (AP-HP). We analyzed literature reviews, consumption, and expenditures through AP-HP data in 2014 and patient profiles with defibrotide in the corresponding diagnostic-related groups (DRGs) and consulted a board of hematologists. Finally, 18 publications were selected. Between 2011 and 2014 consumption increased to €5.2M. In 2014, 80 patients receiving defibrotide were mainly ascribed to the DRG "hematopoietic stem cell transplantation" levels 3 or 4. The tariffs attributed to drugs (€3544 to 4084) cover a small part of treatment costs (€97,524 for an adult). French experts thus recommended a harmonization of indications in prophylaxis (off-label use), improvement of pretransplant care, and optimization of the number of vials used. The economic impact led experts to change their practices. They recommended the restriction of defibrotide use to SOS curative treatment and to high-risk situations in prophylaxis. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

Incorporating computer-assisted assessment to Bachelor of Science ...

African Journals Online (AJOL)

The use of computers in education has already been established for decades. Computers have been used from lesson preparations, presentations, and student assessments. Many authors have studied the design, implementation, and impact of computer-assisted assessment (CAA) (also called computer-based testing, ...

Accuracy of computer-assisted cervicle pedicle screw installation

International Nuclear Information System (INIS)

Zhang Honglei; Zhou Dongsheng; Jang Zhensong

2009-01-01

Objective: To investigate the accuracy of computer-assisted cervical pedicle screw installation and the reason of screw malposition. Methods: A total of 172 cervical pedicle screws were installed by computer-assisted navigation for 30 patients with lower cervical spinal diseases. All the patients were examined by X-ray and CT after operation. Screw's position and direction were measured on the sagittal and transectional images of intraoperative navigation and post-operative CT. Then linear regression analysis was taken between navigational and post-operative CT's images. Results: Two screws perforated the upper pedicle wall, 3 perforated the lateral pedicle wall.There was a positive linear correlation between navigational and post-operative CT's images. Conclusion: Computer-assisted navigation can provide the high accuracy of cervical pedicle screw installation and excursion phenomenon is reason of screw malposition. (authors)

[Basic concept in computer assisted surgery].

Science.gov (United States)

Merloz, Philippe; Wu, Hao

2006-03-01

To investigate application of medical digital imaging systems and computer technologies in orthopedics. The main computer-assisted surgery systems comprise the four following subcategories. (1) A collection and recording process for digital data on each patient, including preoperative images (CT scans, MRI, standard X-rays), intraoperative visualization (fluoroscopy, ultrasound), and intraoperative position and orientation of surgical instruments or bone sections (using 3D localises). Data merging based on the matching of preoperative imaging (CT scans, MRI, standard X-rays) and intraoperative visualization (anatomical landmarks, or bone surfaces digitized intraoperatively via 3D localiser; intraoperative ultrasound images processed for delineation of bone contours). (2) In cases where only intraoperative images are used for computer-assisted surgical navigation, the calibration of the intraoperative imaging system replaces the merged data system, which is then no longer necessary. (3) A system that provides aid in decision-making, so that the surgical approach is planned on basis of multimodal information: the interactive positioning of surgical instruments or bone sections transmitted via pre- or intraoperative images, display of elements to guide surgical navigation (direction, axis, orientation, length and diameter of a surgical instrument, impingement, etc. ). And (4) A system that monitors the surgical procedure, thereby ensuring that the optimal strategy defined at the preoperative stage is taken into account. It is possible that computer-assisted orthopedic surgery systems will enable surgeons to better assess the accuracy and reliability of the various operative techniques, an indispensable stage in the optimization of surgery.

Utilizing Computer Integration to Assist Nursing

OpenAIRE

Hujcs, Marianne

1990-01-01

As the use of computers in health care continues to increase, methods of using these computers to assist nursing practice are also increasing. This paper describes how integration within a hospital information system (HIS) contributed to the development of a report format and computer generated alerts used by nurses. Discussion also includes how the report and alerts impact those nurses providing bedside care as well as how integration of an HIS creates challenges for nursing.

Computer-assisted versus non-computer-assisted preoperative planning of corrective osteotomy for extra-articular distal radius malunions: a randomized controlled trial

Directory of Open Access Journals (Sweden)

Stockmans Filip

2010-12-01

Full Text Available Abstract Background Malunion is the most common complication of distal radius fracture. It has previously been demonstrated that there is a correlation between the quality of anatomical correction and overall wrist function. However, surgical correction can be difficult because of the often complex anatomy associated with this condition. Computer assisted surgical planning, combined with patient-specific surgical guides, has the potential to improve pre-operative understanding of patient anatomy as well as intra-operative accuracy. For patients with malunion of the distal radius fracture, this technology could significantly improve clinical outcomes that largely depend on the quality of restoration of normal anatomy. Therefore, the objective of this study is to compare patient outcomes after corrective osteotomy for distal radius malunion with and without preoperative computer-assisted planning and peri-operative patient-specific surgical guides. Methods/Design This study is a multi-center randomized controlled trial of conventional planning versus computer-assisted planning for surgical correction of distal radius malunion. Adult patients with extra-articular malunion of the distal radius will be invited to enroll in our study. After providing informed consent, subjects will be randomized to two groups: one group will receive corrective surgery with conventional preoperative planning, while the other will receive corrective surgery with computer-assisted pre-operative planning and peri-operative patient specific surgical guides. In the computer-assisted planning group, a CT scan of the affected forearm as well as the normal, contralateral forearm will be obtained. The images will be used to construct a 3D anatomical model of the defect and patient-specific surgical guides will be manufactured. Outcome will be measured by DASH and PRWE scores, grip strength, radiographic measurements, and patient satisfaction at 3, 6, and 12 months

Robotics in medicine

Science.gov (United States)

Kuznetsov, D. N.; Syryamkin, V. I.

2015-11-01

Modern technologies play a very important role in our lives. It is hard to imagine how people can get along without personal computers, and companies - without powerful computer centers. Nowadays, many devices make modern medicine more effective. Medicine is developing constantly, so introduction of robots in this sector is a very promising activity. Advances in technology have influenced medicine greatly. Robotic surgery is now actively developing worldwide. Scientists have been carrying out research and practical attempts to create robotic surgeons for more than 20 years, since the mid-80s of the last century. Robotic assistants play an important role in modern medicine. This industry is new enough and is at the early stage of development; despite this, some developments already have worldwide application; they function successfully and bring invaluable help to employees of medical institutions. Today, doctors can perform operations that seemed impossible a few years ago. Such progress in medicine is due to many factors. First, modern operating rooms are equipped with up-to-date equipment, allowing doctors to make operations more accurately and with less risk to the patient. Second, technology has enabled to improve the quality of doctors' training. Various types of robots exist now: assistants, military robots, space, household and medical, of course. Further, we should make a detailed analysis of existing types of robots and their application. The purpose of the article is to illustrate the most popular types of robots used in medicine.

Computational biomechanics for medicine new approaches and new applications

CERN Document Server

Miller, Karol; Wittek, Adam; Nielsen, Poul

2015-01-01

The Computational Biomechanics for Medicine titles provide an opportunity for specialists in computational biomechanics to present their latest methodologiesand advancements. Thisvolumecomprises twelve of the newest approaches and applications of computational biomechanics, from researchers in Australia, New Zealand, USA, France, Spain and Switzerland. Some of the interesting topics discussed are:real-time simulations; growth and remodelling of soft tissues; inverse and meshless solutions; medical image analysis; and patient-specific solid mechanics simulations. One of the greatest challenges facing the computational engineering community is to extend the success of computational mechanics to fields outside traditional engineering, in particular to biology, the biomedical sciences, and medicine. We hope the research presented within this book series will contribute to overcoming this grand challenge.

Oral and maxillofacial surgery with computer-assisted navigation system.

Science.gov (United States)

Kawachi, Homare; Kawachi, Yasuyuki; Ikeda, Chihaya; Takagi, Ryo; Katakura, Akira; Shibahara, Takahiko

2010-01-01

Intraoperative computer-assisted navigation has gained acceptance in maxillofacial surgery with applications in an increasing number of indications. We adapted a commercially available wireless passive marker system which allows calibration and tracking of virtually every instrument in maxillofacial surgery. Virtual computer-generated anatomical structures are displayed intraoperatively in a semi-immersive head-up display. Continuous observation of the operating field facilitated by computer assistance enables surgical navigation in accordance with the physician's preoperative plans. This case report documents the potential for augmented visualization concepts in surgical resection of tumors in the oral and maxillofacial region. We report a case of T3N2bM0 carcinoma of the maxillary gingival which was surgically resected with the assistance of the Stryker Navigation Cart System. This system was found to be useful in assisting preoperative planning and intraoperative monitoring.

[Computed tomography with computer-assisted detection of pulmonary nodules in dogs and cats].

Science.gov (United States)

Niesterok, C; Piesnack, S; Köhler, C; Ludewig, E; Alef, M; Kiefer, I

2015-01-01

The aim of this study was to assess the potential benefit of computer-assisted detection (CAD) of pulmonary nodules in veterinary medicine. Therefore, the CAD rate was compared to the detection rates of two individual examiners in terms of its sensitivity and false-positive findings. We included 51 dogs and 16 cats with pulmonary nodules previously diagnosed by computed tomography. First, the number of nodules ≥ 3 mm was recorded for each patient by two independent examiners. Subsequently, each examiner used the CAD software for automated nodule detection. With the knowledge of the CAD results, a final consensus decision on the number of nodules was achieved. The software used was a commercially available CAD program. The sensitivity of examiner 1 was 89.2%, while that of examiner 2 reached 87.4%. CAD had a sensitivity of 69.4%. With CAD, the sensitivity of examiner 1 increased to 94.7% and that of examiner 2 to 90.8%. The CAD-system, which we used in our study, had a moderate sensitivity of 69.4%. Despite its severe limitations, with a high level of false-positive and false-negative results, CAD increased the examiners' sensitivity. Therefore, its supportive role in diagnostics appears to be evident.

Applied Computational Intelligence for finance and economics

OpenAIRE

Isasi Viñuela, Pedro; Quintana Montero, David; Sáez Achaerandio, Yago; Mochón, Asunción

2007-01-01

This article introduces some relevant research works on computational intelligence applied to finance and economics. The objective is to offer an appropriate context and a starting point for those who are new to computational intelligence in finance and economics and to give an overview of the most recent works. A classification with five different main areas is presented. Those areas are related with different applications of the most modern computational intelligence techniques showing a ne...

Patterns of Relating Between Physicians and Medical Assistants in Small Family Medicine Offices

Science.gov (United States)

Elder, Nancy C.; Jacobson, C. Jeffrey; Bolon, Shannon K.; Fixler, Joseph; Pallerla, Harini; Busick, Christina; Gerrety, Erica; Kinney, Dee; Regan, Saundra; Pugnale, Michael

2014-01-01

PURPOSE The clinician-colleague relationship is a cornerstone of relationship-centered care (RCC); in small family medicine offices, the clinician–medical assistant (MA) relationship is especially important. We sought to better understand the relationship between MA roles and the clinician-MA relationship within the RCC framework. METHODS We conducted an ethnographic study of 5 small family medicine offices (having informed by clinicians’ roles in hiring and managing MAs and the social familiarity of MAs and clinicians. Within the RCC framework, these findings can be seen as previously undefined constraints and freedoms in what is known as the Complex Responsive Process of Relating between clinicians and MAs. CONCLUSIONS Improved understanding of clinician-MA relationships will allow a better appreciation of how clinicians and MAs function in family medicine teams. Our findings may assist small offices undergoing practice transformation and guide future research to improve the education, training, and use of MAs in the family medicine setting. PMID:24615311

Computer-Assisted Diagnosis of the Sleep Apnea-Hypopnea Syndrome: A Review

Science.gov (United States)

Alvarez-Estevez, Diego; Moret-Bonillo, Vicente

2015-01-01

Automatic diagnosis of the Sleep Apnea-Hypopnea Syndrome (SAHS) has become an important area of research due to the growing interest in the field of sleep medicine and the costs associated with its manual diagnosis. The increment and heterogeneity of the different techniques, however, make it somewhat difficult to adequately follow the recent developments. A literature review within the area of computer-assisted diagnosis of SAHS has been performed comprising the last 15 years of research in the field. Screening approaches, methods for the detection and classification of respiratory events, comprehensive diagnostic systems, and an outline of current commercial approaches are reviewed. An overview of the different methods is presented together with validation analysis and critical discussion of the current state of the art. PMID:26266052

Improved computer-assisted nuclear imaging in renovascular hypertension

International Nuclear Information System (INIS)

Gross, M.L.; Nally, J.V.; Potvini, W.J.; Clarke, H.S. Jr.; Higgins, J.T.; Windham, J.P.

1985-01-01

A computer-assisted program with digital background subtraction has been developed to analyze the initial 90 second Tc-99m DTPA renal flow scans in an attempt to quantitate the early isotope delivery to and uptake by the kidney. This study was designed to compare the computer-assisted 90 second DTPA scan with the conventional 30 minute I-131 Hippuran scan. Six patients with angiographically-proven unilateral renal artery stenosis were studied. The time activity curves for both studies were derived from regions of interest selected from the computer acquired dynamic images. The following parameters were used to assess renal blood flow: differential maximum activity, minimum/maximum activity ratio, and peak width. The computer-assisted DTPA study accurately predicted (6/6) the stenosed side documented angiographically, whereas the conventional Hippuran scan was clearly predictive in only 2/6. In selected cases successfully corrected surgically, the DTPA study proved superior in assessing the degree of patency of the graft. The best discriminatory factors when compared to a template synthesized from curves obtained from normal subjects were differential maximum activity and peak width. The authors conclude that: 1) the computer-assisted 90 second DTPA renal blood flow scan was superior to the conventional I-131 Hippuran scan in demonstrating unilateral reno-vascular disease; 2) the DTPA study was highly predictive of the angiographic findings; and 3) this non-invasive study should prove useful in the diagnosis and serial evaluation following surgery and/or angioplasty for renal artery stenosis

Computer-Assisted Evaluation of Videokymographic Data

Czech Academy of Sciences Publication Activity Database

Novozámský, Adam; Sedlář, Jiří; Zita, A.; Švec, J. G.; Zitová, Barbara; Flusser, Jan; Hauzar, D.

2013-01-01

Roč. 1, č. 1 (2013), s. 49-49 ISSN 1805-8698. [EFMI STC Prague Data and Knowledge for Medical Decision Support. 17.04.2013-19.04.2013, Praha] Institutional support: RVO:67985556 Keywords : videokymography * image process ing * computerassisted evaluation Subject RIV: JD - Computer Applications, Robotics http://library.utia.cas.cz/separaty/2013/ZOI/novozamsky-computer-assisted evaluation of videokymographic data.pdf

To EDF: PHOEBUS, computer-assisted engineering

International Nuclear Information System (INIS)

Lecocq, P.; Goudal, J.C.; Barache, J.M.; Feingold, D.; Cornon, P.

1986-01-01

EDF has built a modular integrated computer-assisted nuclear engineering (CAE) system called POEBUS. Since 1975, the Organization has been interested in CAE which places computer methods and technology at the disposal of the engineering department. This paper describes the changes and their effect on the techniques in use, working methods and the personnel called on to put them into operation [fr

A Brief Review of Computer-Assisted Approaches to Rational Design of Peptide Vaccines

Directory of Open Access Journals (Sweden)

Ashesh Nandy

2016-05-01

Full Text Available The growing incidences of new viral diseases and increasingly frequent viral epidemics have strained therapeutic and preventive measures; the high mutability of viral genes puts additional strains on developmental efforts. Given the high cost and time requirements for new drugs development, vaccines remain as a viable alternative, but there too traditional techniques of live-attenuated or inactivated vaccines have the danger of allergenic reactions and others. Peptide vaccines have, over the last several years, begun to be looked on as more appropriate alternatives, which are economically affordable, require less time for development and hold the promise of multi-valent dosages. The developments in bioinformatics, proteomics, immunogenomics, structural biology and other sciences have spurred the growth of vaccinomics where computer assisted approaches serve to identify suitable peptide targets for eventual development of vaccines. In this mini-review we give a brief overview of some of the recent trends in computer assisted vaccine development with emphasis on the primary selection procedures of probable peptide candidates for vaccine development.

Economic evaluation in stratified medicine: methodological issues and challenges

Directory of Open Access Journals (Sweden)

Hans-Joerg eFugel

2016-05-01

Full Text Available Background: Stratified Medicine (SM is becoming a practical reality with the targeting of medicines by using a biomarker or genetic-based diagnostic to identify the eligible patient sub-population. Like any healthcare intervention, SM interventions have costs and consequences that must be considered by reimbursement authorities with limited resources. Methodological standards and guidelines exist for economic evaluations in clinical pharmacology and are an important component for health technology assessments (HTAs in many countries. However, these guidelines have initially been developed for traditional pharmaceuticals and not for complex interventions with multiple components. This raises the issue as to whether these guidelines are adequate to SM interventions or whether new specific guidance and methodology is needed to avoid inconsistencies and contradictory findings when assessing economic value in SM.Objective: This article describes specific methodological challenges when conducting health economic (HE evaluations for SM interventions and outlines potential modifications necessary to existing evaluation guidelines /principles that would promote consistent economic evaluations for SM.Results/Conclusions: Specific methodological aspects for SM comprise considerations on the choice of comparator, measuring effectiveness and outcomes, appropriate modelling structure and the scope of sensitivity analyses. Although current HE methodology can be applied for SM, greater complexity requires further methodology development and modifications in the guidelines.

Computer Applications in the Design Process.

Science.gov (United States)

Winchip, Susan

Computer Assisted Design (CAD) and Computer Assisted Manufacturing (CAM) are emerging technologies now being used in home economics and interior design applications. A microcomputer in a computer network system is capable of executing computer graphic functions such as three-dimensional modeling, as well as utilizing office automation packages to…

Computer assisted diagnosis of benign bone tumours

International Nuclear Information System (INIS)

Samardziski, M.; Zafiroski, G.; Janevska, V.; Miladinova, D.; Popeska, Z.

2004-01-01

Background. The aim of this study is to determine the correlation between computer-assisted diagnosis (CAD) of benign bone tumours (BBT) and their histological type. Patients and method. Altogether 120 patients were included in two groups. The retrospective group comprised 68 patients in whom the histological type of BBT was known prior to computer analysis. The prospective group comprised 52 patients in whom the histological type of BBT was unknown prior to computer analysis. Computer program was efficient and easy to use. Results. Average percent of histological type confirmed with CAD in the retrospective and prospective groups was 72.06% and 76.92%, respectively. Histological confirmation of CAD in specific BBT was 91.42% for enchondroma, 96.15% for osteoid-osteoma, and 98.08% for osteochondroma. Significantly lower percentage of CAD confirmation of fibroma, chondromixoid fibroma, osteoclastoma, desmoplastic fibroma and osteobalstoma due to their adverse biological character or complex anatomic localization is understandable. Conclusions. The results speak in favour of the assumption that computer assisted diagnosis of bone tumours program may improve the diagnostic accuracy of the examiner. (author)

Medical image computing and computer-assisted intervention - MICCAI 2005. Proceedings; Pt. 1

International Nuclear Information System (INIS)

Duncan, J.S.; Gerig, G.

2005-01-01

The two-volume set LNCS 3749 and LNCS 3750 constitutes the refereed proceedings of the 8th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2005, held in Palm Springs, CA, USA, in October 2005. Based on rigorous peer reviews the program committee selected 237 carefully revised full papers from 632 submissions for presentation in two volumes. The first volume includes all the contributions related to image analysis and validation, vascular image segmentation, image registration, diffusion tensor image analysis, image segmentation and analysis, clinical applications - validation, imaging systems - visualization, computer assisted diagnosis, cellular and molecular image analysis, physically-based modeling, robotics and intervention, medical image computing for clinical applications, and biological imaging - simulation and modeling. The second volume collects the papers related to robotics, image-guided surgery and interventions, image registration, medical image computing, structural and functional brain analysis, model-based image analysis, image-guided intervention: simulation, modeling and display, and image segmentation and analysis. (orig.)

Medical image computing and computer-assisted intervention - MICCAI 2005. Proceedings; Pt. 1

Energy Technology Data Exchange (ETDEWEB)

Duncan, J.S. [Yale Univ., New Haven, CT (United States). Dept. of Biomedical Engineering and Diagnostic Radiology; Gerig, G. (eds.) [North Carolina Univ., Chapel Hill (United States). Dept. of Computer Science

2005-07-01

The two-volume set LNCS 3749 and LNCS 3750 constitutes the refereed proceedings of the 8th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2005, held in Palm Springs, CA, USA, in October 2005. Based on rigorous peer reviews the program committee selected 237 carefully revised full papers from 632 submissions for presentation in two volumes. The first volume includes all the contributions related to image analysis and validation, vascular image segmentation, image registration, diffusion tensor image analysis, image segmentation and analysis, clinical applications - validation, imaging systems - visualization, computer assisted diagnosis, cellular and molecular image analysis, physically-based modeling, robotics and intervention, medical image computing for clinical applications, and biological imaging - simulation and modeling. The second volume collects the papers related to robotics, image-guided surgery and interventions, image registration, medical image computing, structural and functional brain analysis, model-based image analysis, image-guided intervention: simulation, modeling and display, and image segmentation and analysis. (orig.)

Ethics, equity, and economics: a primer on women in medicine.

Science.gov (United States)

Essary, Alison C; Coplan, Bettie

2014-05-01

Women account for more than 70% of physician assistant (PA) students, 62% of practicing PAs, and 57% of faculty in PA programs. About half of all US medical students, 30% of actively practicing physicians, and 37% of faculty at academic medical centers are female. However, women in medicine are paid less than men for equal work effort and achieve fewer leadership positions within academia and medicine. Neglecting the skills and talents of women may lead to a workforce that fails to represent our patient and student populations.

Terminological naming of the world economic crisis in the intertwining of Economics and Medicine

Directory of Open Access Journals (Sweden)

Ieda Maria Alves

2016-06-01

Full Text Available This paper presents some results concerning the Project Cultural and educational values in specialized metaphor: multiple images of the world economic crisis in print media, which is being developed under Capes-DGPU Program, a cooperation program established between Brazil and Spain in order to support exchange and research among researchers and post-graduate students from Brazilian and Spanish universities. Based on the corpus of journalistic texts constituted within this project, we emphasize, in this paper, the relations between Economics and Medicine. These relations, established through metaphors and other figures, show how these two sciences establish intersections, which are reflected in the terminology of the world economic crisis.

Heterogeneous Computing in Economics

DEFF Research Database (Denmark)

Dziubinski, M.P.; Grassi, S.

2014-01-01

This paper shows the potential of heterogeneous computing in solving dynamic equilibrium models in economics. We illustrate the power and simplicity of C++ Accelerated Massive Parallelism (C++ AMP) recently introduced by Microsoft. Starting from the same exercise as Aldrich et al. (J Econ Dyn...

Directory of computer users in nuclear medicine

Energy Technology Data Exchange (ETDEWEB)

Erickson, J.J.; Gurney, J.; McClain, W.J. (eds.)

1979-09-01

The Directory of Computer Users in Nuclear Medicine consists primarily of detailed descriptions and indexes to these descriptions. A typical Installation Description contains the name, address, type, and size of the institution and the names of persons within the institution who can be contacted for further information. If the department has access to a central computer facility for data analysis or timesharing, the type of equipment available and the method of access to that central computer is included. The dedicated data processing equipment used by the department in its nuclear medicine studies is described, including the peripherals, languages used, modes of data collection, and other pertinent information. Following the hardware descriptions are listed the types of studies for which the data processing equipment is used, including the language(s) used, the method of output, and an estimate of the frequency of the particular study. An Installation Index and an Organ Studies Index are also included. (PCS)

Directory of computer users in nuclear medicine

International Nuclear Information System (INIS)

Erickson, J.J.; Gurney, J.; McClain, W.J.

1979-09-01

The Directory of Computer Users in Nuclear Medicine consists primarily of detailed descriptions and indexes to these descriptions. A typical Installation Description contains the name, address, type, and size of the institution and the names of persons within the institution who can be contacted for further information. If the department has access to a central computer facility for data analysis or timesharing, the type of equipment available and the method of access to that central computer is included. The dedicated data processing equipment used by the department in its nuclear medicine studies is described, including the peripherals, languages used, modes of data collection, and other pertinent information. Following the hardware descriptions are listed the types of studies for which the data processing equipment is used, including the language(s) used, the method of output, and an estimate of the frequency of the particular study. An Installation Index and an Organ Studies Index are also included

Practical clinical applications of the computer in nuclear medicine

International Nuclear Information System (INIS)

Price, R.R.; Erickson, J.J.; Patton, J.A.; Jones, J.P.; Lagan, J.E.; Rollo, F.D.

1978-01-01

The impact of the computer on the practice of nuclear medicine has been felt primarily in the area of rapid dynamic studies. At this time it is difficult to find a clinic which routinely performs computer processing of static images. The general purpose digital computer is a sophisticated and flexible instrument. The number of applications for which one can use the computer to augment data acquisition, analysis, or display is essentially unlimited. In this light, the purpose of this exhibit is not to describe all possible applications of the computer in nuclear medicine but rather to illustrate those applications which have generally been accepted as practical in the routine clinical environment. Specifically, we have chosen examples of computer augmented cardiac, and renal function studies as well as examples of relative organ blood flow studies. In addition, a short description of basic computer components and terminology along with a few examples of non-imaging applications are presented

An Empirical Investigation of Some Social and Economic ...

African Journals Online (AJOL)

This study explored the level of some socio-economic remittances from relatives to the elderly in Edo Central. It focused on the range of income/financial assistance; revealed the regularity of assistance with food, clothing, laundry and medicine. A total of 514 respondents, 65 years and above, selected by systematic random ...

System performance and economic analysis of solar-assisted cooling/heating system

KAUST Repository

Huang, B.J.; Wu, J.H.; Yen, R.H.; Wang, J.H.; Hsu, H.Y.; Hsia, C.J.; Yen, C.W.; Chang, J.M.

2011-01-01

The long-term system simulation and economic analysis of solar-assisted cooling/heating system (SACH-2) was carried out in order to find an economical design. The solar heat driven ejector cooling system (ECS) is used to provide part of the cooling

Computer-Assisted Instruction: Authoring Languages. ERIC Digest.

Science.gov (United States)

Reeves, Thomas C.

One of the most perplexing tasks in producing computer-assisted instruction (CAI) is the authoring process. Authoring is generally defined as the process of turning the flowcharts, control algorithms, format sheets, and other documentation of a CAI program's design into computer code that will operationalize the simulation on the delivery system.…

Artificial intelligence in medicine.

Science.gov (United States)

Hamet, Pavel; Tremblay, Johanne

2017-04-01

Artificial Intelligence (AI) is a general term that implies the use of a computer to model intelligent behavior with minimal human intervention. AI is generally accepted as having started with the invention of robots. The term derives from the Czech word robota, meaning biosynthetic machines used as forced labor. In this field, Leonardo Da Vinci's lasting heritage is today's burgeoning use of robotic-assisted surgery, named after him, for complex urologic and gynecologic procedures. Da Vinci's sketchbooks of robots helped set the stage for this innovation. AI, described as the science and engineering of making intelligent machines, was officially born in 1956. The term is applicable to a broad range of items in medicine such as robotics, medical diagnosis, medical statistics, and human biology-up to and including today's "omics". AI in medicine, which is the focus of this review, has two main branches: virtual and physical. The virtual branch includes informatics approaches from deep learning information management to control of health management systems, including electronic health records, and active guidance of physicians in their treatment decisions. The physical branch is best represented by robots used to assist the elderly patient or the attending surgeon. Also embodied in this branch are targeted nanorobots, a unique new drug delivery system. The societal and ethical complexities of these applications require further reflection, proof of their medical utility, economic value, and development of interdisciplinary strategies for their wider application. Copyright © 2017. Published by Elsevier Inc.

Promoting Intrinsic and Extrinsic Motivation among Chemistry Students Using Computer-Assisted Instruction

Science.gov (United States)

Gambari, Isiaka A.; Gbodi, Bimpe E.; Olakanmi, Eyitao U.; Abalaka, Eneojo N.

2016-01-01

The role of computer-assisted instruction in promoting intrinsic and extrinsic motivation among Nigerian secondary school chemistry students was investigated in this study. The study employed two modes of computer-assisted instruction (computer simulation instruction and computer tutorial instructional packages) and two levels of gender (male and…

Computer applications in veterinary medicine | Hassan | Nigerian ...

African Journals Online (AJOL)

... become essential tools in almost every field of research and applied technology. ... Computers in veterinary medicine have been used for veterinary education; ... agro-veterinary project design, monitoring and implementation; preparation of ...

Chinese Herbal Medicine Meets Biological Networks of Complex Diseases: A Computational Perspective

Directory of Open Access Journals (Sweden)

Shuo Gu

2017-01-01

Full Text Available With the rapid development of cheminformatics, computational biology, and systems biology, great progress has been made recently in the computational research of Chinese herbal medicine with in-depth understanding towards pharmacognosy. This paper summarized these studies in the aspects of computational methods, traditional Chinese medicine (TCM compound databases, and TCM network pharmacology. Furthermore, we chose arachidonic acid metabolic network as a case study to demonstrate the regulatory function of herbal medicine in the treatment of inflammation at network level. Finally, a computational workflow for the network-based TCM study, derived from our previous successful applications, was proposed.

Chinese Herbal Medicine Meets Biological Networks of Complex Diseases: A Computational Perspective.

Science.gov (United States)

Gu, Shuo; Pei, Jianfeng

2017-01-01

With the rapid development of cheminformatics, computational biology, and systems biology, great progress has been made recently in the computational research of Chinese herbal medicine with in-depth understanding towards pharmacognosy. This paper summarized these studies in the aspects of computational methods, traditional Chinese medicine (TCM) compound databases, and TCM network pharmacology. Furthermore, we chose arachidonic acid metabolic network as a case study to demonstrate the regulatory function of herbal medicine in the treatment of inflammation at network level. Finally, a computational workflow for the network-based TCM study, derived from our previous successful applications, was proposed.

Maxillary arch rehabilitation using implant-supported computer-assisted design-computer-assisted manufacturing-milled titanium framework

Directory of Open Access Journals (Sweden)

Tulika S Khanna

2017-01-01

Full Text Available Esthetic and functional rehabilitation of completely edentulous maxillary arch with fixed implant supported prosthesis is a challenging task. Newer technologies such as computer assisted design computer assisted manufacturing (CAD CAM and cone beam conventional tomography play an important role in achieving predictable results. Full mouth porcelain fused to metal (PFM individual crowns on CAD CAM milled titanium framework provides positive esthetic and functional outcome. This is a case report of rehabilitation of partially edentulous maxillary arch patient. Staged rehabilitation of this patient was planned. In the first stage, root canal treatment of key abutment teeth was done, nonsalvageable teeth were removed, and immediate interim overdenture was provided. In the second stage, five Nobel Biocare dental implants were placed. After integration impressions were made, CAD CAM milled titanium bar was fabricated. Individual PFM crowns were made and cemented. This method gives better esthetic compared to acrylic fused to metal hybrid prosthesis with the advantage of retrievability just like screw retained prosthesis. Hence, this technique is good for rehabilitation of patients with high esthetic demands.

Computational Tools To Model Halogen Bonds in Medicinal Chemistry.

Science.gov (United States)

Ford, Melissa Coates; Ho, P Shing

2016-03-10

The use of halogens in therapeutics dates back to the earliest days of medicine when seaweed was used as a source of iodine to treat goiters. The incorporation of halogens to improve the potency of drugs is now fairly standard in medicinal chemistry. In the past decade, halogens have been recognized as direct participants in defining the affinity of inhibitors through a noncovalent interaction called the halogen bond or X-bond. Incorporating X-bonding into structure-based drug design requires computational models for the anisotropic distribution of charge and the nonspherical shape of halogens, which lead to their highly directional geometries and stabilizing energies. We review here current successes and challenges in developing computational methods to introduce X-bonding into lead compound discovery and optimization during drug development. This fast-growing field will push further development of more accurate and efficient computational tools to accelerate the exploitation of halogens in medicinal chemistry.

Aligning the Economic Value of Companion Diagnostics and Stratified Medicines

Directory of Open Access Journals (Sweden)

Edward D. Blair

2012-11-01

Full Text Available The twin forces of payors seeking fair pricing and the rising costs of developing new medicines has driven a closer relationship between pharmaceutical companies and diagnostics companies, because stratified medicines, guided by companion diagnostics, offer better commercial, as well as clinical, outcomes. Stratified medicines have created clinical success and provided rapid product approvals, particularly in oncology, and indeed have changed the dynamic between drug and diagnostic developers. The commercial payback for such partnerships offered by stratified medicines has been less well articulated, but this has shifted as the benefits in risk management, pricing and value creation for all stakeholders become clearer. In this larger healthcare setting, stratified medicine provides both physicians and patients with greater insight on the disease and provides rationale for providers to understand cost-effectiveness of treatment. This article considers how the economic value of stratified medicine relationships can be recognized and translated into better outcomes for all healthcare stakeholders.

Economic scale of utilization of radiation in medicine in Japan.

Science.gov (United States)

Yanagisawa, K; Inoue, T; Hayakawa, K; Shiotari, H; Nakamura, Y; Matsuyama, K; Nagasawa, K

2009-01-01

Economic scale of radioisotopes (RI) in Japan is studied in the field of medicine, agriculture and a part of industry. (1) RI is used during medical examination with economic scale by 1.7M$ (million dollars) in 1997 and 0.4M$ in 2005. (2) Economic scale of RI utilization in agriculture is 4M$ for R&D, 127M$ for environmental protection and 1M$ for chronology. RI usage in agriculture is increased five times due to needs at environmental technology lasted after the Kyoto protocol. (3) Indirect economic scale of RI ((85)Kr, (147)Pm, (90)Cr) usage in paper fabrication field in Japan for 2006 is 8432M$.

Computational biomechanics for medicine fundamental science and patient-specific applications

CERN Document Server

Miller, Karol; Wittek, Adam; Nielsen, Poul

2014-01-01

One of the greatest challenges facing the computational engineering community is to extend the success of computational mechanics to fields outside traditional engineering, in particular to biology, the biomedical sciences, and medicine. The Computational Biomechanics for Medicine titles provide an opportunity for specialists in computational biomechanics to present their latest methodologies and advancements. This latest installment comprises nine of the latest developments in both fundamental science and patient-specific applications, from researchers in Australia, New Zealand, USA, UK, France, Ireland, and China. Some of the interesting topics discussed are: cellular mechanics; tumor growth and modeling; medical image analysis; and both patient-specific fluid dynamics and solid mechanics simulations.

The economic possibilities and perspectives of aromatic and medicinal herbs (Satureja kitaibelii

Directory of Open Access Journals (Sweden)

Jelenković Ljiljana

2016-01-01

Full Text Available The economy in Serbia has not been working at its full capacity for a long time, which had left a great mark in economic stability of the country. The good side is that the environment pollution is less than in case of its full capacity. Therefore there shouldn't try to achieve the developed technologies at all costs, but it should orient to the utmost to agriculture and food production. Economically high developed countries pay a lot of attention to the healthy way of life and nutrition, and therefore the market, on which would sell the food products from Serbia, are with characteristic brand and undoubtable quality. Owing to the expressed trend for the healthy way of living, more and more people in high developed countries turn to aromatic and medicinal herbs which they use as spices, for therapeutic or medicinal purposes. Such trend shows also various industry branches, and they increasingly base their production on natural products. Hereof the aromatic and medicinal herbs start being more and more important economic resource of those countries which have them.

Blackboard architecture and qualitative model in a computer aided assistant designed to define computers for HEP computing

International Nuclear Information System (INIS)

Nodarse, F.F.; Ivanov, V.G.

1991-01-01

Using BLACKBOARD architecture and qualitative model, an expert systm was developed to assist the use in defining the computers method for High Energy Physics computing. The COMEX system requires an IBM AT personal computer or compatible with than 640 Kb RAM and hard disk. 5 refs.; 9 figs

Interactive Computer-Assisted Instruction in Acid-Base Physiology for Mobile Computer Platforms

Science.gov (United States)

Longmuir, Kenneth J.

2014-01-01

In this project, the traditional lecture hall presentation of acid-base physiology in the first-year medical school curriculum was replaced by interactive, computer-assisted instruction designed primarily for the iPad and other mobile computer platforms. Three learning modules were developed, each with ~20 screens of information, on the subjects…

Computer assisted procedure maintenance

International Nuclear Information System (INIS)

Bisio, R.; Hulsund, J. E.; Nilsen, S.

2004-04-01

The maintenance of operating procedures in a NPP is a tedious and complicated task. Through the whole life cycle of the procedures they will be dynamic, 'living' documents. Several aspects of the procedure must be considered in a revision process. Pertinent details and attributes of the procedure must be checked. An organizational structure must be created and responsibilities allotted for drafting, revising, reviewing and publishing procedures. Available powerful computer technology provides solutions within document management and computerisation of procedures. These solutions can also support the maintenance of procedures. Not all parts of the procedure life cycle are equally amenable to computerized support. This report looks at the procedure life cycle in todays NPPs and discusses the possibilities associated with introduction of computer technology to assist the maintenance of procedures. (Author)

PLEXFIN a computer model for the economic assessment of nuclear power plant life extension. User's manual

International Nuclear Information System (INIS)

2007-01-01

The IAEA developed PLEXFIN, a computer model analysis tool aimed to assist decision makers in the assessment of the economic viability of a nuclear power plant life/licence extension. This user's manual was produced to facilitate the application of the PLEXFIN computer model. It is widely accepted in the industry that the operational life of a nuclear power plant is not limited to a pre-determined number of years, sometimes established on non-technical grounds, but by the capability of the plant to comply with the nuclear safety and technical requirements in a cost effective manner. The decision to extend the license/life of a nuclear power plant involves a number of political, technical and economic issues. The economic viability is a cornerstone of the decision-making process. In a liberalized electricity market, the economics to justify a nuclear power plant life/license extension decision requires a more complex evaluation. This user's manual was elaborated in the framework of the IAEA's programmes on Continuous process improvement of NPP operating performance, and on Models for analysis and capacity building for sustainable energy development, with the support of four consultants meetings

Automation of Knowledge Work in Medicine and Health care: Future and Challenges

Directory of Open Access Journals (Sweden)

Farzan Majidfar

2017-07-01

Full Text Available Increment of computing speed, machine learning and human interface, have extended capabilities of artificial intelligence applications to an important stage. It is predicted that use of artificial intelligence (AI to automate knowledge-based occupations (occupations such as medicine, engineering and law may have an global enormous economic impact in the near future.Applications based on artificial intelligence are able to improve health and quality of life for millions in the coming years. Although clinical applications of computer science are slow moving to real-world labs, but there are promising signs that the pace of innovation will improve. In the near future AI based applications by automating knowledge-based work in the field of diagnosis and treatment, nursing and health care, robotic surgery and development of new drugs, will have a transformative effect on the health sector. Therefore many artificial intelligence systems should work closely with health providers and patients to gain their trust. The progress of how smart machines naturally will interact with healthcare professionals, patients and patients' families is very important, yet challenging.In this article, we review the future of  automation of knowledge enabled by AI work in medicine and healthcare in  seven categories including big medical data mining, computer Aided Diagnosis, online consultations, evidence based medicine, health assistance, precision medicine and drug creation. Also challenges of this issue including cultural, organizational, legal and social barriers are described.

Toward computer-assisted diagnosis and telemedicine in ophthalmology

Czech Academy of Sciences Publication Activity Database

Marrugo, A.; Millán, M. S.; Cristóbal, G.; Gabarda, S.; Šorel, Michal; Šroubek, Filip

2012-01-01

Roč. 2012, č. 6 (2012), s. 1-3 ISSN 1818-2259 R&D Projects: GA MŠk 1M0572 Institutional research plan: CEZ:AV0Z10750506 Institutional support: RVO:67985556 Keywords : computer-aided diagnosis * medical and retinal image * deconvolution * telemedicine Subject RIV: JD - Computer Applications, Robotics http://library.utia.cas.cz/separaty/2012/ZOI/sorel-toward computer-assisted diagnosis and telemedicine in ophthalmology.pdf

Evaluation of Computer-Assisted Instruction in Principles of Economics.

Science.gov (United States)

Coates, Dennis; Humphreys, Brad R.

2001-01-01

Assesses the effectiveness of supplementary Web-based materials and activities in traditional introductory college economics courses. Results suggest that faculty should focus more on developing self-test quizzes and effective bulletin board discussion projects as opposed to generating online content related to text or lecture notes. (Author/LRW)

COOPERATION IN THE FIELD OF ECONOMICS, OF SCIENCE AND MEDICINE IN EUROPE

Directory of Open Access Journals (Sweden)

Norina-Consuela FORNA

2015-07-01

Full Text Available The issue of medical cooperation raises many questions current and controversial, which are the focus of interest in socio-political and legal, such as debates on instruments to combat the high costs, the public health system, legislation aimed at ensuring health, tobacco consumption, alcohol, obesity and others. Public health legislation deals with the framework conditions, legal and social aspects of public health, protection and deployment the law of public health on tobacco. The aim of this study is to identify the degree to which economic freedom correlates with indicators of development, health and economic cooperation in medicine field. In this regard, we consider useful to investigate how the correlation indicators of policy Health – 2020 with global and European economic development. Research methods are located in estimating the degree of international cooperation in the medicine field through statistical methods, comparison, graphics, deduction or induction.The results allow to formulate a whole picture regarding international cooperation in the field of medicine, combating different diseases but human vices as obesity, tobacco use, alcohol etc. Facilitation of cooperation in research and innovation is the key to bridging the gap between research and demand in different countries and regions.

Chinese Herbal Medicine Meets Biological Networks of Complex Diseases: A Computational Perspective

OpenAIRE

Shuo Gu; Jianfeng Pei

2017-01-01

With the rapid development of cheminformatics, computational biology, and systems biology, great progress has been made recently in the computational research of Chinese herbal medicine with in-depth understanding towards pharmacognosy. This paper summarized these studies in the aspects of computational methods, traditional Chinese medicine (TCM) compound databases, and TCM network pharmacology. Furthermore, we chose arachidonic acid metabolic network as a case study to demonstrate the regula...

Computer Assisted Programmed Instruction and Cognitive ...

African Journals Online (AJOL)

The study probes into the effect of Computer Assisted Instruction and Cognitive preference style on achievement of secondary school Physics Students in Ogun State of Nigeria. The population of the study comprises the SS II students in Abeokuta Educational Zone. 186 students sample were drawn from the population for ...

The Evolution of Computer Based Learning Software Design: Computer Assisted Teaching Unit Experience.

Science.gov (United States)

Blandford, A. E.; Smith, P. R.

1986-01-01

Describes the style of design of computer simulations developed by Computer Assisted Teaching Unit at Queen Mary College with reference to user interface, input and initialization, input data vetting, effective display screen use, graphical results presentation, and need for hard copy. Procedures and problems relating to academic involvement are…

Computer-assisted indexing for the INIS database

International Nuclear Information System (INIS)

Nevyjel, A.

2006-01-01

INIS has identified computer-assisted indexing as areas where information technology could assist best in maintaining database quality and indexing consistency, while containing production costs. Subject analysis is a very important but also very expensive process in the production of the INIS database. Given the current necessity to process an increased number of records, including subject analysis, without additional staff, INIS as well as the member states need improvements in their processing efficiency. Computer assisted subject analysis is a promising way to achieve this. The quality of the INIS database is defined by its inputting rules. The Thesaurus is a terminological control device used in translating from the natural language of documents, indexers or users into a more constrained system language. It is a controlled and dynamic vocabulary of semantically and generically related terms. It is the essential tool for subject analysis as well as for advanced search engines. To support the identification of descriptors in the free text (title, abstract, free keywords) 'hidden terms' have been introduced as extension of the Thesaurus, which identify phrases or character strings of free text and point to the valid descriptor, which should be suggested. In the process of computer-assisted subject analysis the bibliographic records (including title and abstract) are analyzed by the software, resulting in a list of suggested descriptors. Within the working platform (graphical user interface) the suggested descriptors are sorted by importance (by their relevance for the content of the document) and the subject specialist clearly sees the highlighted context from which the terms were selected. The system allows the subject specialist to accept or reject descriptors from the suggested list and to assign additional descriptors when necessary. First experiences show that a performance enhancement of about 80-100% can be achieved in the subject analysis process. (author)

Innovative Partnerships Assist Community College Computing Programs.

Science.gov (United States)

O'Banion, Terry

1987-01-01

Relates efforts of major corporations in providing assistance to community college computing programs. Explains the goals of the League for Innovation in the Community College, a consortium of 19 community colleges, and cites examples of collaborative projects. (ML)

Accurate measurement of surface areas of anatomical structures by computer-assisted triangulation of computed tomography images

Energy Technology Data Exchange (ETDEWEB)

Allardice, J.T.; Jacomb-Hood, J.; Abulafi, A.M.; Williams, N.S. (Royal London Hospital (United Kingdom)); Cookson, J.; Dykes, E.; Holman, J. (London Hospital Medical College (United Kingdom))

1993-05-01

There is a need for accurate surface area measurement of internal anatomical structures in order to define light dosimetry in adjunctive intraoperative photodynamic therapy (AIOPDT). The authors investigated whether computer-assisted triangulation of serial sections generated by computed tomography (CT) scanning can give an accurate assessment of the surface area of the walls of the true pelvis after anterior resection and before colorectal anastomosis. They show that the technique of paper density tessellation is an acceptable method of measuring the surface areas of phantom objects, with a maximum error of 0.5%, and is used as the gold standard. Computer-assisted triangulation of CT images of standard geometric objects and accurately-constructed pelvic phantoms gives a surface area assessment with a maximum error of 2.5% compared with the gold standard. The CT images of 20 patients' pelves have been analysed by computer-assisted triangulation and this shows the surface area of the walls varies from 143 cm[sup 2] to 392 cm[sup 2]. (Author).

77 FR 39498 - Guidances for Industry and Food and Drug Administration Staff: Computer-Assisted Detection...

Science.gov (United States)

2012-07-03

...] Guidances for Industry and Food and Drug Administration Staff: Computer-Assisted Detection Devices Applied... Clinical Performance Assessment: Considerations for Computer-Assisted Detection Devices Applied to... guidance, entitled ``Computer-Assisted Detection Devices Applied to Radiology Images and Radiology Device...

Computer-Assisted Instruction and Continuing Motivation.

Science.gov (United States)

Mosley, Mary Lou; And Others

Effects of two feedback conditions--comment and no comment--on the motivation of sixth grade students to continue with computer assisted instruction (CAI) were investigated, and results for boys and for girls were compared. Subjects were 62 students--29 boys and 33 girls--from a suburban elementary school who were randomly assigned to the comment…

The effectiveness, safety, and economic evaluation of Korean medicine for unexplained infertile women: A multi-center, prospective, observational study protocol.

Science.gov (United States)

Kim, Su-Hyun; Jo, Junyoung; Kim, Dong-Il

2017-12-01

Infertility is a condition in which a woman has not been pregnant despite having had normal intercourse for 1 year. The number of unexplained infertile females is increasing because of late marriage customs, as well as environmental and lifestyle habits. In Korea, infertile females have been treated with Korean medicine (KM). However, these effects have not been objectively confirmed through clinical trials. Therefore, this study was conducted to demonstrate the effectiveness of herbal medicine treatment in infertile patients and to demonstrate the economic feasibility through economical evaluation with assisted reproductive technology.This study is designed as a multicenter, single-arm clinical trial. All participants included will be from 3 Korean Medicine hospitals in Korea and will voluntarily sign an informed consent agreement. All recruited patients will conduct related surveys and tests, and be provided with treatment according to their menstrual cycle. Patients will take herbal medicines for 4 menstruation cycles and receive acupuncture and moxibustion treatment at 3 times (menstrual cycle day 3, 8, 14) during 4 menstruation cycles. They will also undergo an approximately 4 menstrual cycle treatment period, and 3 menstrual cycle observation period. If pregnant during the study, participants will take the herbal medicine for implantation for about 15 days. In this study, the primary outcome will be the clinical pregnancy rate, whereas the secondary outcome will include the implantation rate, ongoing pregnancy rate, and live birth rate.Ultimately, this study will provide clinical data regarding the effectiveness and safety of KM treatment for females with unexplained infertility and important evidence for establishing standard KM treatments for unexplained infertility. Moreover, we will identify the most cost-effective way to treat unexplained infertility. Korean Clinical Trial Registry (CRIS), Republic of Korea: KCT0002235. Date: February 21, 2017

Computer-Assisted Periodical Routing and Renewal Audit

Science.gov (United States)

Yerkey, A. Neil

1973-01-01

A computer-assisted periodical control system was designed to reduce clerical time required to maintain records in three areas: renewal audit, routing, and records-keeping. The renewal audit features are unusual and are described in detail. (3 references) (Author/DH)

Cognitive Approaches for Medicine in Cloud Computing.

Science.gov (United States)

Ogiela, Urszula; Takizawa, Makoto; Ogiela, Lidia

2018-03-03

This paper will present the application potential of the cognitive approach to data interpretation, with special reference to medical areas. The possibilities of using the meaning approach to data description and analysis will be proposed for data analysis tasks in Cloud Computing. The methods of cognitive data management in Cloud Computing are aimed to support the processes of protecting data against unauthorised takeover and they serve to enhance the data management processes. The accomplishment of the proposed tasks will be the definition of algorithms for the execution of meaning data interpretation processes in safe Cloud Computing. • We proposed a cognitive methods for data description. • Proposed a techniques for secure data in Cloud Computing. • Application of cognitive approaches for medicine was described.

Animal-assisted interventions in internal and rehabilitation medicine: a review of the recent literature.

Science.gov (United States)

Muñoz Lasa, S; Ferriero, G; Brigatti, E; Valero, R; Franchignoni, F

2011-06-01

While conventional wisdom has always affirmed the value of animals in promoting human well-being, only recently has their therapeutic role in medicine become the focus of dedicated research. Therapeutic modalities that use animals as a tool for improving the physical, emotional, cognitive and/or social functioning of humans are called animal-assisted interventions (AAI), and are classified into: animal-assisted activities (AAA); animal-assisted therapy (AAT); and service animal programs (SAP). The aim of this review is to analyze the papers published between 2001 and 2010 in the most influential medical journals dealing with AAI, and discuss their findings in the light of what may be of interest for internal medicine and rehabilitation. A total of 35 articles met the strict inclusion criteria for this review: 18 papers dealing with AAA, 8 with AAT, and 9 with SAP. The therapeutic outcomes associated with AAA are: enhancement of socialization; reduction of stress, anxiety and loneliness; improvement in mood and general well-being; and development of leisure/recreation skills. Regarding AAT, horses are often used as a complementary strategy to facilitate the normalization of muscle tone and improve motor skills in children with cerebral palsy and persons with lower limb spasticity. Finally, most SAP utilize dogs, that assist people with various disabilities in performing everyday activities, thus reducing their dependence on other persons. Further studies are needed to better define the fields and programs for the therapeutic use of animals and to increase their utilization in medicine, as a promising, complementary and natural means to improve both functional autonomy and quality of life.

Computer-assisted learning and simulation systems in dentistry--a challenge to society.

Science.gov (United States)

Welk, A; Splieth, Ch; Wierinck, E; Gilpatrick, R O; Meyer, G

2006-07-01

Computer technology is increasingly used in practical training at universities. However, in spite of their potential, computer-assisted learning (CAL) and computer-assisted simulation (CAS) systems still appear to be underutilized in dental education. Advantages, challenges, problems, and solutions of computer-assisted learning and simulation in dentistry are discussed by means of MEDLINE, open Internet platform searches, and key results of a study among German dental schools. The advantages of computer-assisted learning are seen for example in self-paced and self-directed learning and increased motivation. It is useful for both objective theoretical and practical tests and for training students to handle complex cases. CAL can lead to more structured learning and can support training in evidence-based decision-making. The reasons for the still relatively rare implementation of CAL/CAS systems in dental education include an inability to finance, lack of studies of CAL/CAS, and too much effort required to integrate CAL/CAS systems into the curriculum. To overcome the reasons for the relative low degree of computer technology use, we should strive for multicenter research and development projects monitored by the appropriate national and international scientific societies, so that the potential of computer technology can be fully realized in graduate, postgraduate, and continuing dental education.

Fundamentals of nuclear medicine

Energy Technology Data Exchange (ETDEWEB)

Alazraki, N.P.; Mishkin, F.S.

1984-01-01

This guidebook for clinical nuclear medicine is written as a description of how nuclear medicine procedures should be used by clinicians in evaluating their patients. It is designed to assist medical students and physicians in becoming acquainted with nuclear medicine techniques for detecting and evaluating most common disorders. The material provides an introduction to, not a textbook of, nuclear medicine. Each chapter is devoted to a particular organ system or topic relevant to the risks and benefits involved in nuclear medicine studies. The emphasis is on presenting the rationales for ordering the various clinical imaging procedures performed in most nuclear medicine departments. Where appropriate, alternative imaging modalities including ultrasound, computed tomography imaging, and radiographic special procedures are discussed. Comparative data between nuclear medicine imaging and other modalities are presented to help guide the practicing clinician in the selection of the most appropriate procedure for a given problem.

Research on the Use of Computer-Assisted Instruction.

Science.gov (United States)

Craft, C. O.

1982-01-01

Reviews recent research studies related to computer assisted instruction (CAI). The studies concerned program effectiveness, teaching of psychomotor skills, tool availability, and factors affecting the adoption of CAI. (CT)

L'Enseignement des langues assiste par ordinateur: nouvelle pedagogie? (Computer Assisted Language Instruction: New Pedagogy?).

Science.gov (United States)

Elkabas, Charles

1989-01-01

Recent second language instruction computer software focuses almost exclusively on the structures and forms of language, and on programed learning instead of developing communicative skills. Until artificial intelligence changes these old behavioristic principles, computer-assisted language instruction can only play a minor role in language…

43 Computer Assisted Programmed Instruction and Cognitive ...

African Journals Online (AJOL)

cce

between Cognitive Preference Style and Computer Assisted Programmed ... teaching the subjects makes a wide range of students who have moderate numerical ability and ... on achievement of physics students, more so when such strategy has .... explaining prompting, thinking, discussing, clarifying concepts, asking ...

Errors and Intelligence in Computer-Assisted Language Learning: Parsers and Pedagogues. Routledge Studies in Computer Assisted Language Learning

Science.gov (United States)

Heift, Trude; Schulze, Mathias

2012-01-01

This book provides the first comprehensive overview of theoretical issues, historical developments and current trends in ICALL (Intelligent Computer-Assisted Language Learning). It assumes a basic familiarity with Second Language Acquisition (SLA) theory and teaching, CALL and linguistics. It is of interest to upper undergraduate and/or graduate…

Accelerator assisted repositories, technical issue identification and economic assessment

Energy Technology Data Exchange (ETDEWEB)

Myers, T.; Favale, A.; Berwald, D. [Northrop Grumman Corp., Bethpage, NY (United States)

1995-12-31

An investigation (technical and economic) is presented to quantify the impact of accelerator assisted repository (AAR) system on the US national nuclear repository strategy. An overview of US spent fuel policy is presented which provides a means to comparatively assess competing spent fuel disposition technologies under investigation. The advantages of an AAR system are highlighted and discussed. A companion economic analysis is presented. The results indicate that although a US geologic waste repository will continue to be required, waste partitioning and accelerator transmutation of selected actinides, and long-lived fission products, can result in substantial benefits. (author) 18 refs.

Why physician-assisted suicide perpetuates the idolatory of medicine.

Science.gov (United States)

Cherry, Mark J

2003-01-01

Adequate response to physician-assisted suicide and euthanasia depends on fundamental philosophical and theological issues, including the character of an appropriate philosophically and theologically anchored anthropology, where the central element of traditional Christian anthropology is that humans are created to worship God. As I will argue, Christian morality and moral epistemology must be nested within and understood through this background Christian anthropology. As a result, I will argue that physician-assisted suicide and euthanasia can only be one-sidedly and inadequately appreciated through rational appeal to central values, such as "human dignity" and "self determination", or through "sola scriptura" biblical interpretation, or individual judgments of conscience. Adequately addressing physician-assisted suicide and euthanasia will depend on a more fundamental spiritual-therapeutic approach. This cluster of moral, epistemological, anthropological, and bioethical claims will be explored by drawing on the texts of St. Basil the Great, St. Maximos the Confessor, and St. Isaac the Syrian. Their reflections on medicine, the human good, and its relationship to worship, spiritual therapy, and God will be used as a basis to indicate a broader philosophical perspective, which will be needed to avoid a one-sided, incomplete approach to the challenges of physician-assisted suicide and euthanasia. Medical morality, I argue, is best understood within categories that transcend the right, the good, the just, and the virtuous; namely, the holy.

Microwave Assisted Organic Synthesis of Heterocycles in Aqueous Media: Recent Advances in Medicinal Chemistry.

Science.gov (United States)

Frecentese, Francesco; Saccone, Irene; Caliendo, Giuseppe; Corvino, Angela; Fiorino, Ferdinando; Magli, Elisa; Perissutti, Elisa; Severino, Beatrice; Santagada, Vincenzo

2016-01-01

Green chemistry is a discipline of great interest in medicinal chemistry. It involves all fields of chemistry and it is based on the principle to conduct chemical reactions protecting the environment at the same time, through the use of chemical procedures able to avoid pollution. In this context, water as solvent is a good choice because it is abundant, nontoxic, non-caustic, and non-combustible. Even if microwave assisted organic reactions in conventional solvents have quickly progressed, in the recent years medicinal chemists have focused their attention to processes deemed not dangerous for the environment, using nanotechnology and greener solvents as water. Several reports of reaction optimizations and selectivities, demonstrating the capability of microwave to allow the obtaining of increased yields have been recently published using water as solvent. In this review, we selected the available knowledge related to microwave assisted organic synthesis in aqueous medium, furnishing examples of the newest strategies to obtain useful scaffolds and novel derivatives for medicinal chemistry purposes. The intention of this review is to demonstrate the exclusive ability of MAOS in water as solvent or as co-solvent. For this purpose we report here the most representative applications of MAOS using water as solvent, focusing on medicinal chemistry processes leading to interesting nitrogen containing heterocycles with potential pharmaceutical applications.

Computer Assistance for Writing Interactive Programs: TICS.

Science.gov (United States)

Kaplow, Roy; And Others

1973-01-01

Investigators developed an on-line, interactive programing system--the Teacher-Interactive Computer System (TICS)--to provide assistance to those who were not programers, but nevertheless wished to write interactive instructional programs. TICS had two components: an author system and a delivery system. Underlying assumptions were that…

Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

Science.gov (United States)

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

[APPLICATION OF COMPUTER-ASSISTED TECHNOLOGY IN ANALYSIS OF REVISION REASON OF UNICOMPARTMENTAL KNEE ARTHROPLASTY].

Science.gov (United States)

Jia, Di; Li, Yanlin; Wang, Guoliang; Gao, Huanyu; Yu, Yang

2016-01-01

To conclude the revision reason of unicompartmental knee arthroplasty (UKA) using computer-assisted technology so as to provide reference for reducing the revision incidence and improving the level of surgical technique and rehabilitation. The relevant literature on analyzing revision reason of UKA using computer-assisted technology in recent years was extensively reviewed. The revision reasons by computer-assisted technology are fracture of the medial tibial plateau, progressive osteoarthritis of reserved compartment, dislocation of mobile bearing, prosthesis loosening, polyethylene wear, and unexplained persistent pain. Computer-assisted technology can be used to analyze the revision reason of UKA and guide the best operating method and rehabilitation scheme by simulating the operative process and knee joint activities.

Precision Medicine and PET/Computed Tomography: Challenges and Implementation.

Science.gov (United States)

Subramaniam, Rathan M

2017-01-01

Precision Medicine is about selecting the right therapy for the right patient, at the right time, specific to the molecular targets expressed by disease or tumors, in the context of patient's environment and lifestyle. Some of the challenges for delivery of precision medicine in oncology include biomarkers for patient selection for enrichment-precision diagnostics, mapping out tumor heterogeneity that contributes to therapy failures, and early therapy assessment to identify resistance to therapies. PET/computed tomography offers solutions in these important areas of challenges and facilitates implementation of precision medicine. Copyright © 2016 Elsevier Inc. All rights reserved.

"Too much medicine": Insights and explanations from economic theory and research.

Science.gov (United States)

Hensher, Martin; Tisdell, John; Zimitat, Craig

2017-03-01

Increasing attention has been paid in recent years to the problem of "too much medicine", whereby patients receive unnecessary investigations and treatments providing them with little or no benefit, but which expose them to risks of harm. Despite this phenomenon potentially constituting an inefficient use of health care resources, it has received limited direct attention from health economists. This paper considers "too much medicine" as a form of overconsumption, drawing on research from health economics, behavioural economics and ecological economics to identify possible explanations for and drivers of overconsumption. We define overconsumption of health care as a situation in which individuals consume in a way that undermines their own well-being. Extensive health economics research since the 1960s has provided clear evidence that physicians do not act as perfect agents for patients, and there are perverse incentives for them to provide unnecessary services under various circumstances. There is strong evidence of the existence of supplier-induced demand, and of the impact of various forms of financial incentives on clinical practice. The behavioural economics evidence provides rich insights on why clinical practice may depart from an "evidence-based" approach. Moreover, behavioural findings on health professionals' strategies for dealing with uncertainty, and for avoiding potential regret, provide powerful explanations of why overuse and overtreatment may frequently appear to be the "rational" choice in clinical decision-making, even when they cause harm. The ecological economics literature suggests that status or positional competition can, via the principal-agent relationship in health care, provide a further force driving overconsumption. This novel synthesis of economic perspectives suggests important scope for interdisciplinary collaboration; signals potentially important issues for health technology assessment and health technology management policies; and

Computer-Assisted Management of Instruction in Veterinary Public Health

Science.gov (United States)

Holt, Elsbeth; And Others

1975-01-01

Reviews a course in Food Hygiene and Public Health at the University of Illinois College of Veterinary Medicine in which students are sequenced through a series of computer-based lessons or autotutorial slide-tape lessons, the computer also being used to route, test, and keep records. Since grades indicated mastery of the subject, the course will…

Computer Assisted Language Learning (CALL) Software: Evaluation ...

African Journals Online (AJOL)

Evaluating the nature and extent of the influence of Computer Assisted Language Learning (CALL) on the quality of language learning is highly problematic. This is owing to the number and complexity of interacting variables involved in setting the items for teaching and learning languages. This paper identified and ...

76 FR 71980 - SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's...

Science.gov (United States)

2011-11-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-P-0176] SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's Petition for... SEDASYS computer-assisted personalized sedation system (SEDASYS) submitted by Ethicon Endo-Surgery Inc...

“Computer Assisted Language Learning” (CALL

Directory of Open Access Journals (Sweden)

Nazlı Gündüz

2005-10-01

Full Text Available This article will provide an overview of computers; an overview of the history of CALL, itspros and cons, the internet, World Wide Web, Multimedia, and research related to the uses of computers in the language classroom. Also, it also aims to provide some background for the beginnerson using the Internet in language classes today. It discusses some of the common types of Internetactivities that are being used today, what the minimum requirements are for using the Internet forlanguage learning, and some easy activities you can adapt for your classes. Some special terminology related to computers will also be used in this paper. For example, computer assisted language learning(CALL refers to the sets of instructions which need to be loaded into the computer for it to be able to work in the language classroom. It should be borne in mind that CALL does not refer to the use of acomputer by a teacher to type out a worksheet or a class list or preparing his/her own teaching alone.Hardware refers to any computer equipment used, including the computer itself, the keyboard, screen (or the monitor, the disc-drive, and the printer. Software (computer programs refers to the sets of instructions which need to be loaded into the computer for it to be able to work.

Computational Exploration of Molecular Scaffolds in Medicinal Chemistry.

Science.gov (United States)

Hu, Ye; Stumpfe, Dagmar; Bajorath, Jürgen

2016-05-12

The scaffold concept is widely applied in medicinal chemistry. Scaffolds are mostly used to represent core structures of bioactive compounds. Although the scaffold concept has limitations and is often viewed differently from a chemical and computational perspective, it has provided a basis for systematic investigations of molecular cores and building blocks, going far beyond the consideration of individual compound series. Over the past 2 decades, alternative scaffold definitions and organization schemes have been introduced and scaffolds have been studied in a variety of ways and increasingly on a large scale. Major applications of the scaffold concept include the generation of molecular hierarchies, structural classification, association of scaffolds with biological activities, and activity prediction. This contribution discusses computational approaches for scaffold generation and analysis, with emphasis on recent developments impacting medicinal chemistry. A variety of scaffold-based studies are discussed, and a perspective on scaffold methods is provided.

Conversation Analysis in Computer-Assisted Language Learning

Science.gov (United States)

González-Lloret, Marta

2015-01-01

The use of Conversation Analysis (CA) in the study of technology-mediated interactions is a recent methodological addition to qualitative research in the field of Computer-assisted Language Learning (CALL). The expansion of CA in Second Language Acquisition research, coupled with the need for qualitative techniques to explore how people interact…

Using computer assisted learning for clinical skills education in nursing: integrative review.

Science.gov (United States)

Bloomfield, Jacqueline G; While, Alison E; Roberts, Julia D

2008-08-01

This paper is a report of an integrative review of research investigating computer assisted learning for clinical skills education in nursing, the ways in which it has been studied and the general findings. Clinical skills are an essential aspect of nursing practice and there is international debate about the most effective ways in which these can be taught. Computer assisted learning has been used as an alternative to conventional teaching methods, and robust research to evaluate its effectiveness is essential. The CINAHL, Medline, BNI, PsycInfo and ERIC electronic databases were searched for the period 1997-2006 for research-based papers published in English. Electronic citation tracking and hand searching of reference lists and relevant journals was also undertaken. Twelve studies met the inclusion criteria. An integrative review was conducted and each paper was explored in relation to: design, aims, sample, outcome measures and findings. Many of the study samples were small and there were weaknesses in designs. There is limited empirical evidence addressing the use of computer assisted learning for clinical skills education in nursing. Computer assisted learning has been used to teach a limited range of clinical skills in a variety of settings. The paucity of evaluative studies indicates the need for more rigorous research to investigate the effect of computer assisted learning for this purpose. Areas that need to be addressed in future studies include: sample size, range of skills, longitudinal follow-up and control of confounding variables.

Computer-Assisted Language Learning: Diversity in Research and Practice

Science.gov (United States)

Stockwell, Glenn, Ed.

2012-01-01

Computer-assisted language learning (CALL) is an approach to teaching and learning languages that uses computers and other technologies to present, reinforce, and assess material to be learned, or to create environments where teachers and learners can interact with one another and the outside world. This book provides a much-needed overview of the…

Using Precept-Assist® to predict performance on the American Board of Family Medicine In-Training Examination.

Science.gov (United States)

Post, Robert E; Jamena, Gemma P; Gamble, James D

2014-09-01

Precept-Assist® (PA) is a computer-based program developed by the Virtua Family Medicine Residency where residents receive a score on a Likert-type scale from an attending for each precept based on their knowledge base. The purpose of this study was to attempt to validate this program for precepting family medicine residents. This was a validation study. PA and American Board of Family Medicine (ABFM) In-Training Exam (ITE) scores for all residents from a community-based family medicine residency between the years 2002 and 2011 were included (n=216). Pearson correlation coefficients were calculated between PA scores for the second quarter of the academic year (October 1 to December 31) and scores on the ITE. An ROC curve was also created to determine sensitivity and specificity for various PA scores in predicting residents scoring 500 or above on the ITE. The PA mean (SD) score was 5.18 (0.84) and the ITE mean (SD) score was 425.1 (87.6). The Pearson correlation coefficient between PA and ITE scores was 0.55, which is a moderately positive correlation. The AUC of the ROC curve was 0.783 (95% CI 0.704-0.859). A PA score of 5.5 (between the level of a PGY-2 and PGY-3) was 72% sensitive and 77% specific for scoring 500 or above on the ITE with a positive LR of 3.12. There is a significant correlation between PA scores and ABFM In-Training Exam scores. PA is a valid screening tool that can be used as a predictor for future performance in Family Medicine In-Training exams.

The Use of Computer Simulation Gaming in Teaching Broadcast Economics.

Science.gov (United States)

Mancuso, Louis C.

The purpose of this study was to develop a broadcast economic computer simulation and to ascertain how a lecture-computer simulation game compared as a teaching method with a more traditional lecture and case study instructional methods. In each of three sections of a broadcast economics course, a different teaching methodology was employed: (1)…

Personalized Computer-Assisted Mathematics Problem-Solving Program and Its Impact on Taiwanese Students

Science.gov (United States)

Chen, Chiu-Jung; Liu, Pei-Lin

2007-01-01

This study evaluated the effects of a personalized computer-assisted mathematics problem-solving program on the performance and attitude of Taiwanese fourth grade students. The purpose of this study was to determine whether the personalized computer-assisted program improved student performance and attitude over the nonpersonalized program.…

Introducing computer-assisted training sessions in the clinical skills lab at the Faculty of Medicine, Suez Canal University.

Science.gov (United States)

Hosny, Somaya; Mishriky, Adel M; Youssef, Mirella

2008-01-01

The Faculty of Medicine, Suez Canal University clinical skills lab was established in 1981 as the first skills lab in Egypt to cope with innovation in medical education adopted since school inauguration in 1978. Students are trained using their peers or models. Training is done weekly, guided by checklists tested for validity and reliability and updated regularly. Students receive immediate feedback on their performance. Recently, the number of students has increased, leading to challenges in providing adequate supervision and training experiences. A project to design and implement a computer-assisted training (CAT) system seemed to be a plausible solution. To assess the quality of a newly developed CAT product, faculty and students' satisfaction with it, and its impact on the learning process. The project involved preparation of multimedia video-films with a web interface for links of different scientific materials. The project was implemented on second year students. A quality check was done to assess the product's scientific content, and technical quality using questionnaires filled by 84 faculty members (139 filled forms) and 175 students (924 filled forms). For assessment of impact, results of examinations after project implementation were compared with results of 2nd year students of previous 3 years. More faculty (96.3%) were satisfied with the product and considered its quality good to excellent, compared to 93.9% of students, p < 0.001. Most faculty (76.2%) have agreed on its suitability for self-learning, while most students considered the product would be suitable after modification. The percentage of students' failures was lower after project implementation, compared to previous 3 years, p < 0.05. CAT materials developed for training of second year students in skills lab proved to be of good scientific content and quality, and suitable for self-learning. Their use was associated with lower failure rates among students. A randomized trial is recommended

Through a glass darkly: economics and personalised medicine.

Science.gov (United States)

Haycox, Alan; Pirmohamed, Munir; McLeod, Claire; Houten, Rachel; Richards, Sarah

2014-11-01

Personalised medicine and pharmacogenetic-test-guided treatment strategies will be of increasing importance in the future, both in terms of healthcare provision and evaluation. It is well recognised that significant variability exists in the response of patients to drugs resulting from genetic or biological variations; however, we are only now gradually becoming aware of the complexities involved. Enormous variability occurs in the risk-benefit ratio that will be experienced by each individual patient as a consequence of their overall genetic make-up. Although not a panacea, enhanced scientific knowledge of the genetic basis for such variability offers the potential for a more 'tailored' approach to prescribing in the future, making it more closely attuned to the needs of the individual patient. Such 'personalised' medicine has the potential to revolutionise care provision in a manner that provides a range of challenges to current structures and processes of 'conventional' healthcare delivery. The aim of this paper is to outline such challenges and analyse potential ways in which they may be addressed in the future. It provides non-expert readers with a non-technical case study of the complexities inherent in the evaluation of a pharmacogenetic-test-guided treatment strategy from a health economic perspective. Wherever possible, technical issues have been minimised; however, references are provided for readers who wish to enhance their knowledge of the pharmacological basis of the case study of cytochrome P450 test-guided treatment. The case study aims simply to illustrate the approach and difficulties encountered in the health economic evaluation of complex pharmacogenetic technologies. Such technologies present a range of new and complex issues which have crucial implications for health economists attempting to obtain an accurate assessment of the 'value' of the technology in clinical practice in an array of patient subgroups. Personalised medicine is the future

Computer-assisted estimating for the Los Alamos Scientific Laboratory

International Nuclear Information System (INIS)

Spooner, J.E.

1976-02-01

An analysis is made of the cost estimating system currently in use at the Los Alamos Scientific Laboratory (LASL) and the benefits of computer assistance are evaluated. A computer-assisted estimating system (CAE) is proposed for LASL. CAE can decrease turnaround and provide more flexible response to management requests for cost information and analyses. It can enhance value optimization at the design stage, improve cost control and change-order justification, and widen the use of cost information in the design process. CAE costs are not well defined at this time although they appear to break even with present operations. It is recommended that a CAE system description be submitted for contractor consideration and bid while LASL system development continues concurrently

Computers in Nuclear Medicine. Chapter 12

Energy Technology Data Exchange (ETDEWEB)

Parker, J. A. [Division of Nuclear Medicine and Department of Radiology, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, MA (United States)

2014-12-15

In 1965, Gordon Moore, a co-founder of Intel, said that new memory chips have twice the capacity of prior chips, and that new chips are released every 18 to 24 months. This statement has become known as Moore’s law. Moore’s law means that memory size increases exponentially. More generally, the exponential growth of computers has applied not only to memory size, but also to many computer capabilities, and since 1965, Moore’s law has remained remarkably accurate. Further, this remarkable growth in capabilities has occurred with a steady decrease in price. Anyone who has even a little appreciation of exponential growth realizes that exponential growth cannot continue indefinitely. However, the history of computers is littered with ‘experts’ who have prematurely declared the end of Moore’s law. The quotation at the beginning of this section indicates that future growth of computers has often been underestimated. The exponential growth of computer capabilities has a very important implication for the management of a nuclear medicine department. The growth in productivity of the staff of a department is slow, especially when compared to the growth in capabilities of a computer. This means that whatever decision was made in the past about the balance between staff and computers is now out of date. A good heuristic is: always apply more computer capacity and less people to a new task. Or stated more simply, hardware is ‘cheap’, at least with respect to what you learned in training or what you decided last time you considered the balance between hardware and ‘peopleware’.

Computer-assisted qualitative data analysis software.

Science.gov (United States)

Cope, Diane G

2014-05-01

Advances in technology have provided new approaches for data collection methods and analysis for researchers. Data collection is no longer limited to paper-and-pencil format, and numerous methods are now available through Internet and electronic resources. With these techniques, researchers are not burdened with entering data manually and data analysis is facilitated by software programs. Quantitative research is supported by the use of computer software and provides ease in the management of large data sets and rapid analysis of numeric statistical methods. New technologies are emerging to support qualitative research with the availability of computer-assisted qualitative data analysis software (CAQDAS).CAQDAS will be presented with a discussion of advantages, limitations, controversial issues, and recommendations for this type of software use.

Effects of acupuncture and computer-assisted cognitive training for post-stroke attention deficits: study protocol for a randomized controlled trial.

Science.gov (United States)

Huang, Jia; McCaskey, Michael A; Yang, Shanli; Ye, Haicheng; Tao, Jing; Jiang, Cai; Schuster-Amft, Corina; Balzer, Christian; Ettlin, Thierry; Schupp, Wilfried; Kulke, Hartwig; Chen, Lidian

2015-12-02

A majority of stroke survivors present with cognitive impairments. Attention disturbance, which leads to impaired concentration and overall reduced cognitive functions, is strongly associated with stroke. The clinical efficacy of acupuncture with Baihui (GV20) and Shenting (GV24) as well as computer-assisted cognitive training in stroke and post-stroke cognitive impairment have both been demonstrated in previous studies. To date, no systematic comparison of these exists and the potential beneficial effects of a combined application are yet to be examined. The main objective of this pilot study is to evaluate the effects of computer-assisted cognitive training compared to acupuncture on the outcomes of attention assessments. The second objective is to test the effects of a combined cognitive intervention that incorporates computer-assisted cognitive training and acupuncture (ACoTrain). An international multicentre, single-blinded, randomised controlled pilot trial will be conducted. In a 1:1:1 ratio, 60 inpatients with post-stroke cognitive dysfunction will be randomly allocated into either the acupuncture group, the computer-assisted cognitive training group, or the ACoTrain group in addition to their individual rehabilitation programme. The intervention period of this pilot trial will last 4 weeks (30 minutes per day, 5 days per week, Monday to Friday). The primary outcome is the test battery for attentional performance. The secondary outcomes include the Trail Making Test, Test des Deux Barrages, National Institute of Health Stroke Scale, and Modified Barthel Index for assessment of daily life competence, and the EuroQol Questionnaire for health-related quality of life. This trial mainly focuses on evaluating the effects of computer-assisted cognitive training compared to acupuncture on the outcomes of attention assessments. The results of this pilot trial are expected to provide new insights on how Eastern and Western medicine can complement one another and

From economic survival to recreation: contemporary uses of wild food and medicine in rural Sweden, Ukraine and NW Russia.

Science.gov (United States)

Stryamets, Nataliya; Elbakidze, Marine; Ceuterick, Melissa; Angelstam, Per; Axelsson, Robert

2015-06-16

There are many ethnobotanical studies on the use of wild plants and mushrooms for food and medicinal treatment in Europe. However, there is a lack of comparative ethnobotanical research on the role of non-wood forest products (NWFPs) as wild food and medicine in local livelihoods in countries with different socio-economic conditions. The aim of this study was to compare the present use of wild food and medicine in three places representing different stages of socio-economic development in Europe. Specifically we explore which plant and fungi species people use for food and medicine in three selected rural regions of Sweden, Ukraine and the Russian Federation. We studied the current use of NWFPs for food and medicine in three rural areas that represent a gradient in economic development (as indicated by the World Bank), i.e., Småland high plain (south Sweden), Roztochya (western Ukraine), and Kortkeros (Komi Republic in North West Russia). All areas were characterised by (a) predominating rural residency, (b) high forest coverage, and (c) free access to NWFPs. A total of 205 in-depth semi-structured interviews were conducted with local residents in the three study areas. The collected NWFPs data included (1) the species that are used; (2) the amount harvested, (3) uses and practices (4) changes over time, (5) sources of knowledge regarding the use of NWFPs as wild food and medicine and (6) traditional recipes. In Sweden 11 species of wild plant and fungi species were used as food, and no plant species were used for medicinal purposes. In Ukraine the present use of NWFPs included 26 wild foods and 60 medicinal species, while in Russia 36 food and 44 medicinal species were reported. In the economically less developed rural areas of Ukraine and Russia, the use of NWFPs continues to be an important part of livelihoods, both as a source of income and for domestic use as food and medicine. In Sweden the collection of wild food has become mainly a recreational activity

Ethical and Professional Issues in Computer-Assisted Therapy.

Science.gov (United States)

Ford, B. Douglas

1993-01-01

Discusses ethical and professional issues in psychology regarding computer-assisted therapy (CAT). Topics addressed include an explanation of CAT; whether CAT is psychotherapy; software, including independent use, validation of effectiveness, and restricted access; clinician resistance; client acceptance; the impact on ethical standards; and a…

From Computer Assisted Language Learning (CALL) to Mobile Assisted Language Use (MALU)

Science.gov (United States)

Jarvis, Huw; Achilleos, Marianna

2013-01-01

This article begins by critiquing the long-established acronym CALL (Computer Assisted Language Learning). We then go on to report on a small-scale study which examines how student non-native speakers of English use a range of digital devices beyond the classroom in both their first (L1) and second (L2) languages. We look also at the extent to…

High speed computer assisted tomography

International Nuclear Information System (INIS)

Maydan, D.; Shepp, L.A.

1980-01-01

X-ray generation and detection apparatus for use in a computer assisted tomography system which permits relatively high speed scanning. A large x-ray tube having a circular anode (3) surrounds the patient area. A movable electron gun (8) orbits adjacent to the anode. The anode directs into the patient area xrays which are delimited into a fan beam by a pair of collimating rings (21). After passing through the patient, x-rays are detected by an array (22) of movable detectors. Detector subarrays (23) are synchronously movable out of the x-ray plane to permit the passage of the fan beam

The costs and consequences of assisted reproductive technology : an economic perspective

NARCIS (Netherlands)

Connolly, Mark P.; Hoorens, Stijn; Chambers, Georgina M.

2010-01-01

Despite the growing use of assisted reproductive technologies (ART) worldwide, there is only a limited understanding of the economics of ART to inform policy about effective, safe and equitable financing of ART treatment. A review was undertaken of key studies regarding the costs and consequences of

Economic evaluations of personalized medicine: existing challenges and current developments

Directory of Open Access Journals (Sweden)

Shabaruddin FH

2015-06-01

Full Text Available Fatiha H Shabaruddin,1 Nigel D Fleeman,2 Katherine Payne3 1Department of Pharmacy, University of Malaya, Kuala Lumpur, Malaysia; 2Liverpool Reviews and Implementation Group (LRiG, University of Liverpool, Liverpool, UK; 3Institute of Population Health, The University of Manchester, Manchester, UK Abstract: Personalized medicine, with the aim of safely, effectively, and cost-effectively targeting treatment to a prespecified patient population, has always been a long-time goal within health care. It is often argued that personalizing treatment will inevitably improve clinical outcomes for patients and help achieve more effective use of health care resources. Demand is increasing for demonstrable evidence of clinical and cost-effectiveness to support the use of personalized medicine in health care. This paper begins with an overview of the existing challenges in conducting economic evaluations of genetics- and genomics-targeted technologies, as an example of personalized medicine. Our paper illustrates the complexity of the challenges faced by these technologies by highlighting the variations in the issues faced by diagnostic tests for somatic variations, generally referring to genetic variation in a tumor, and germline variations, generally referring to inherited genetic variation in enzymes involved in drug metabolic pathways. These tests are typically aimed at stratifying patient populations into subgroups on the basis of clinical effectiveness (response or safety (avoidance of adverse events. The paper summarizes the data requirements for economic evaluations of genetics and genomics-based technologies while outlining that the main challenges relating to data requirements revolve around the availability and quality of existing data. We conclude by discussing current developments aimed to address the challenges of assessing the cost-effectiveness of genetics and genomics-based technologies, which revolve around two central issues that are

Computational intelligence, medicine and biology selected links

CERN Document Server

Zaitseva, Elena

2015-01-01

This book contains an interesting and state-of the art collection of chapters presenting several examples of attempts to developing modern tools utilizing computational intelligence in different real life problems encountered by humans. Reasoning, prediction, modeling, optimization, decision making, etc. need modern, soft and intelligent algorithms, methods and methodologies to solve, in the efficient ways, problems appearing in human activity. The contents of the book is divided into two parts. Part I, consisting of four chapters, is devoted to selected links of computational intelligence, medicine, health care and biomechanics. Several problems are considered: estimation of healthcare system reliability, classification of ultrasound thyroid images, application of fuzzy logic to measure weight status and central fatness, and deriving kinematics directly from video records. Part II, also consisting of four chapters, is devoted to selected links of computational intelligence and biology. The common denominato...

[Trust-based economics with medicine outcome-based pricing].

Science.gov (United States)

Lhoste, F

2013-09-01

In recent decades, the pharmaceutical industry as built a high level of confidence thanks to innovative medicines that improve both duration and quality of life. Some recent scandals have however discredited this industry, now suspected of cheating or bribery. Even the scientific progresses are challenged on the ground of possible conflicts of interests and value uncertainty. This situation is deleterious. Simultaneously the economic crisis exacerbates the payers' expectations in terms of clinical value and value/price ratio. It also stimulates the demand for outcomes in real life. This induces a new economic approach for the market access of highly expensive reimbursable drugs. It consists in paying only for drugs actually proven effective in terms of actual outcomes, with a full or partial refund of the payer in case of failure, according to accurate and simple criteria in so called "performance agreement". Confidence is restored accordingly. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

45 CFR 233.35 - Computing the assistance payment under retrospective budgeting after the initial one or two...

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Computing the assistance payment under... FINANCIAL ASSISTANCE PROGRAMS § 233.35 Computing the assistance payment under retrospective budgeting after... shall be computed retrospectively, i.e., shall be based on income and other relevant circumstances in...

Computers in nuclear medicine

International Nuclear Information System (INIS)

Cradduck, T.D.; Knowles, L.G.

1977-01-01

The decision to buy a computer is difficult. The wide variety of computing systems available makes that decision even harder because each of the systems has unique advantages and disadvantages. The following list contains many of the essentials any computer system for nuclear medicine should embody: (1) sophisticated and reliable hardware with sufficient memory capacity to acquire or display at least 128 x 128 static images or 64 x 64 dynamic studies and with the facility for adding extra hardware and peripheral equipment at a later date; (2) a well-proved, general-purpose, real-time operating system to which the programs specific to the gamma camera have been interfaced and which will allow expansion or modification of both hardware and software in the future; (3) a display exhibiting at least 128 x 128 resolution, a monochrome mode with extended gray scale, and perhaps color; a varied set of programmed image formats and hardware system that includes local refresher capabilities; (4) a high-level language, such as FORTRAN or BASIC, with the ability to directly access all data files and interact with system programs as well as a macroprogramming capability so the user may write his own programs for data manipulation and analysis; (5) a comprehensive yet generally applicable set of system programs to enable data acquisition, storage, analysis, and display. In addition to the above, one should expect the services of a team of well-trained maintenance technicians and engineers. The manufacturer should offer software support and exhibit a plan for continued development and upgrading of the software initially provided

A news media analysis of economic sanction effects on access to medicine in Iran.

Science.gov (United States)

Kheirandish, Mehrnaz; Rashidian, Arash; Bigdeli, Maryam

2015-01-01

In the past decades economic sanctions have been used by different countries or international organizations in order to deprive target countries of some transactions. While the sanctions do not target health care systems or public health structures, they may, in fact, affect the availability of health care in target countries. In this study, we used media analysis to assess the impacts of recent sanctions imposed by the Central Bank of Iran in 2012 on access to medicines in Iran. We searched different sources of written news media including a database of nonspecialized weeklies and magazines, online news sources, web pages of daily newspapers and healthcare oriented weeklies from 2011 to 2013. We searched the sources using the general term "medicine" to reduce the chances of missing relevant items. The identified news media were read, and categorized under three groups of items announcing "shortage of medicines," "medicines related issues" and "no shortage." We conducted trend analyzes to see whether the news media related to access to medicines were affected by the economic sanctions. A total number of 371 relevant news media were collected. The number of news media related to medicines substantially increased in the study period: 30 (8%), 161 (43%) and 180 (49%) were published in 2011, 2012 and 2013, respectively. While 145 (39%) of media items referred to the shortage of medicines, 97 (26%) reported no shortage or alleviating of concerns. Media analysis suggests a clear increase in the number of news media reporting a shortage in Iran after the sanctions. In 2013, there were accompanying increases in the number of news media reporting alleviation of the shortages of medicines. Our analysis provides evidence of negative effects of the sanctions on access to medicines in Iran.

Soft Tissue Biomechanical Modeling for Computer Assisted Surgery

CERN Document Server

2012-01-01

  This volume focuses on the biomechanical modeling of biological tissues in the context of Computer Assisted Surgery (CAS). More specifically, deformable soft tissues are addressed since they are the subject of the most recent developments in this field. The pioneering works on this CAS topic date from the 1980's, with applications in orthopaedics and biomechanical models of bones. More recently, however, biomechanical models of soft tissues have been proposed since most of the human body is made of soft organs that can be deformed by the surgical gesture. Such models are much more complicated to handle since the tissues can be subject to large deformations (non-linear geometrical framework) as well as complex stress/strain relationships (non-linear mechanical framework). Part 1 of the volume presents biomechanical models that have been developed in a CAS context and used during surgery. This is particularly new since most of the soft tissues models already proposed concern Computer Assisted Planning, with ...

Monetary Value of a Prescription Assistance Program Service in a Rural Family Medicine Clinic

Science.gov (United States)

Whitley, Heather P.

2011-01-01

Purpose: To quantify the monetary value of medications provided to rural Alabamians through provision of pharmaceutical manufacturer-sponsored prescription assistance programs (PAPs) provided by a clinical pharmacist in a private Black Belt family medicine clinic during 2007 and 2008. Methods: Patients struggling to afford prescription medications…

Generative Computer Assisted Instruction: An Application of Artificial Intelligence to CAI.

Science.gov (United States)

Koffman, Elliot B.

Frame-oriented computer-assisted instruction (CAI) systems dominate the field, but these mechanized programed texts utilize the computational power of the computer to a minimal degree and are difficult to modify. Newer, generative CAI systems which are supplied with a knowledge of subject matter can generate their own problems and solutions, can…

Computer-assisted instruction; MR imaging of congenital heart disease

International Nuclear Information System (INIS)

Choi, Young Hi; Yu, Pil Mun; Lee, Sang Hoon; Choe, Yeon Hyeon; Kim, Yang Min

1996-01-01

To develop a software program for computer-assisted instruction on MR imaging of congenital heart disease for medical students and residents to achieve repetitive and effective self-learning. We used a film scanner(Scan Maker 35t) and IBM-PC(486 DX-2, 60 MHz) for acquisition and storage of image data. The accessories attached to the main processor were CD-ROM drive(Sony), sound card(Soundblaster-Pro), and speaker. We used software of Adobe Photoshop(v 3.0) and paint shop-pro(v 3.0) for preprocessing image data, and paintbrush from microsoft windows 3.1 for labelling. The language used for programming was visual basic(v 3.0) from microsoft corporation. We developed a software program for computer-assisted instruction on MR imaging of congenital heart disease as an effective educational tool

An introduction to economic analysis in medicine - the basics of methology and chosen trems. Examples of results of evaluation in nuclear medicine

International Nuclear Information System (INIS)

Brockhuis, B.M.; Lass, P.

2002-01-01

This article overviews the basics terms and methodology of economic analysis in health care. The most important forms of economic analysis: cost-effectiveness, cost-utility and cost-minimisation analysis and aims of their application are presented. Particular emphasis is put on economic evaluation in nuclear medicine, e.g. FDG-PET v. thoracotomy in lung cancer diagnosis, radioiodine therapy v. antithyroid drugs in hyperthyroidism and technetium-99m-MIBI breast imaging v. biopsy in nonpalpable breast abnormalities. (author)

Computer Assisted Project-Based Instruction: The Effects on Science Achievement, Computer Achievement and Portfolio Assessment

Science.gov (United States)

Erdogan, Yavuz; Dede, Dinçer

2015-01-01

The purpose of this study is to compare the effects of computer assisted project-based instruction on learners' achievement in a science and technology course, in a computer course and in portfolio development. With this aim in mind, a quasi-experimental design was used and a sample of 70 seventh grade secondary school students from Org. Esref…

Artificial intelligence in medicine and cardiac imaging: harnessing big data and advanced computing to provide personalized medical diagnosis and treatment.

Science.gov (United States)

Dilsizian, Steven E; Siegel, Eliot L

2014-01-01

Although advances in information technology in the past decade have come in quantum leaps in nearly every aspect of our lives, they seem to be coming at a slower pace in the field of medicine. However, the implementation of electronic health records (EHR) in hospitals is increasing rapidly, accelerated by the meaningful use initiatives associated with the Center for Medicare & Medicaid Services EHR Incentive Programs. The transition to electronic medical records and availability of patient data has been associated with increases in the volume and complexity of patient information, as well as an increase in medical alerts, with resulting "alert fatigue" and increased expectations for rapid and accurate diagnosis and treatment. Unfortunately, these increased demands on health care providers create greater risk for diagnostic and therapeutic errors. In the near future, artificial intelligence (AI)/machine learning will likely assist physicians with differential diagnosis of disease, treatment options suggestions, and recommendations, and, in the case of medical imaging, with cues in image interpretation. Mining and advanced analysis of "big data" in health care provide the potential not only to perform "in silico" research but also to provide "real time" diagnostic and (potentially) therapeutic recommendations based on empirical data. "On demand" access to high-performance computing and large health care databases will support and sustain our ability to achieve personalized medicine. The IBM Jeopardy! Challenge, which pitted the best all-time human players against the Watson computer, captured the imagination of millions of people across the world and demonstrated the potential to apply AI approaches to a wide variety of subject matter, including medicine. The combination of AI, big data, and massively parallel computing offers the potential to create a revolutionary way of practicing evidence-based, personalized medicine.

Medicinal plants of Dagala region in Bhutan: their diversity, distribution, uses and economic potential.

Science.gov (United States)

Wangchuk, Phurpa; Namgay, Kuenga; Gayleg, Karma; Dorji, Yeshi

2016-06-24

The traditional g.so-ba-rig-pa hospitals in Bhutan uses more than 100 polyingredient medicines that are manufactured by the Menjong Sorig Pharmaceuticals (MSP). The MSP has been collecting medicinal plants from Lingzhi region for about 48 years and therefore the ecological pressure on these plants have increased. It is MSP's top priority to identify an alternative collection site to ease the problem. Therefore, this study was carried out to determine whether Dagala region could potentially be an alternative collection site for MSP. First the multidisciplinary research team generated a tentative plant list by reviewing a body of ancient g.so-ba-rig-pa literature, current formulations, and the MSP medicinal plants inventory documents. Second, the research team visited the study areas in Dagala region for spot identification of medicinal plants. Third, we confirmed our traditional and botanical identification by crosschecking the descriptions with the series of books on traditional texts, Flora of Bhutan, scientific papers on medicinal plants, and the plant databases. We have identified 100 species of high altitude medicinal plants from Dagala region. Of these, 24 species grow abundantly, 29 species grow in moderate numbers and 47 species were scarce. More than 85 species belonged to the herbaceous life form and 51 of them are used as a whole plant. A total of 68 species grow in between 4000 and 4999 meter above sea level. These 100 medicinal plants represented 39 different families and 80 genera and the maximum number of plants belonged to the family Asteraceae. Of 60 species that are currently used for formulating medicines at MSP, 16 species have economic importance with potential for commercial collection. Out of seven areas covered by the survey, Kipchen hosted maximum number of medicinal plants (21 species). Our survey identified 100 medicinal plants from Dagala region and of these, 16 species has economic potential that could benefit both MSP and Dagala

Quality assurance of nuclear medicine computer software

International Nuclear Information System (INIS)

Cradduck, T.D.

1986-01-01

Although quality assurance activities have become well established for the hardware found in nuclear medicine little attention has been paid to computer software. This paper outlines some of the problems that exist and indicates some of the solutions presently under development. The major thrust has been towards establishment of programming standards and comprehensive documentation. Some manufacturers have developed installation verification procedures which programmers are urged to use as models for their own programs. Items that tend to cause erroneous results are discussed with the emphasis for error detection and correction being placed on proper education and training of the computer operator. The concept of interchangeable data files or 'software phantoms' for purposes of quality assurance is discussed. (Author)

Quixotic medicine: physical and economic laws perilously disregarded in health care and medical education.

Science.gov (United States)

Haburchak, David R; Mitchell, Bradford C; Boomer, Craig J

2008-12-01

Wise medical practice requires balancing the idealistic goals of medicine with the physical and economic realities of their application. Clinicians should know and employ the rules, maxims, and heuristics that summarize these goals and constraints. There has been little formal study of rules or laws pertaining to therapeutics and prognosis, so the authors postulate four physical and four economic laws that apply to health care: the laws of (1) finitude, (2) inertia, (3) entropy, and (4) the uncertainty principle; and the laws of (5) diminishing returns, (6) unintended consequences, (7) distribution, and (8) economizing. These laws manifest themselves in the absence of health, the pathogenesis of disease, prognosis, and the behaviors of participants in the health care enterprise. Physicians and the public perilously disregard these laws, frequently producing misdiagnoses, distraction, false expectations, unanticipated and undesirable outcomes, inequitable distribution of scarce resources, distrust, and cynicism: in short, quixotic medicine. The origins and public reinforcement of quixotic medicine make it deaf to calls for pragmatism. To achieve the Accreditation Council of Graduate Medical Education competency of systems-based practice, the authors recommend that premedical education return to a broader liberal arts curriculum and that medical education and training foster didactic and experiential knowledge of these eight laws.

Complexity hints for economic policy

CERN Document Server

Salzano, Massimo

2007-01-01

This volume extends the complexity approach to economics. This complexity approach is not a completely new way of doing economics, and that it is a replacement for existing economics, but rather the integration of some new analytic and computational techniques into economists’ bag of tools. It provides some alternative pattern generators, which can supplement existing approaches by providing an alternative way of finding patterns than be obtained by the traditional scientific approach. On this new kind of policy hints can be obtained. The reason why the complexity approach is taking hold now in economics is because the computing technology has advanced. This advance allows consideration of analytical systems that could not previously be considered by economists. Consideration of these systems suggested that the results of the "control-based" models might not extend easily to more complicated systems, and that we now have a method—piggybacking computer assisted analysis onto analytic methods—to start gen...

The impact of computer science in molecular medicine: enabling high-throughput research.

Science.gov (United States)

de la Iglesia, Diana; García-Remesal, Miguel; de la Calle, Guillermo; Kulikowski, Casimir; Sanz, Ferran; Maojo, Víctor

2013-01-01

The Human Genome Project and the explosion of high-throughput data have transformed the areas of molecular and personalized medicine, which are producing a wide range of studies and experimental results and providing new insights for developing medical applications. Research in many interdisciplinary fields is resulting in data repositories and computational tools that support a wide diversity of tasks: genome sequencing, genome-wide association studies, analysis of genotype-phenotype interactions, drug toxicity and side effects assessment, prediction of protein interactions and diseases, development of computational models, biomarker discovery, and many others. The authors of the present paper have developed several inventories covering tools, initiatives and studies in different computational fields related to molecular medicine: medical informatics, bioinformatics, clinical informatics and nanoinformatics. With these inventories, created by mining the scientific literature, we have carried out several reviews of these fields, providing researchers with a useful framework to locate, discover, search and integrate resources. In this paper we present an analysis of the state-of-the-art as it relates to computational resources for molecular medicine, based on results compiled in our inventories, as well as results extracted from a systematic review of the literature and other scientific media. The present review is based on the impact of their related publications and the available data and software resources for molecular medicine. It aims to provide information that can be useful to support ongoing research and work to improve diagnostics and therapeutics based on molecular-level insights.

Computer-Vision-Assisted Palm Rehabilitation With Supervised Learning.

Science.gov (United States)

Vamsikrishna, K M; Dogra, Debi Prosad; Desarkar, Maunendra Sankar

2016-05-01

Physical rehabilitation supported by the computer-assisted-interface is gaining popularity among health-care fraternity. In this paper, we have proposed a computer-vision-assisted contactless methodology to facilitate palm and finger rehabilitation. Leap motion controller has been interfaced with a computing device to record parameters describing 3-D movements of the palm of a user undergoing rehabilitation. We have proposed an interface using Unity3D development platform. Our interface is capable of analyzing intermediate steps of rehabilitation without the help of an expert, and it can provide online feedback to the user. Isolated gestures are classified using linear discriminant analysis (DA) and support vector machines (SVM). Finally, a set of discrete hidden Markov models (HMM) have been used to classify gesture sequence performed during rehabilitation. Experimental validation using a large number of samples collected from healthy volunteers reveals that DA and SVM perform similarly while applied on isolated gesture recognition. We have compared the results of HMM-based sequence classification with CRF-based techniques. Our results confirm that both HMM and CRF perform quite similarly when tested on gesture sequences. The proposed system can be used for home-based palm or finger rehabilitation in the absence of experts.

The Effects of Computer-assisted and Distance Learning of Geometric Modeling

Directory of Open Access Journals (Sweden)

Omer Faruk Sozcu

2013-01-01

Full Text Available The effects of computer-assisted and distance learning of geometric modeling and computer aided geometric design are studied. It was shown that computer algebra systems and dynamic geometric environments can be considered as excellent tools for teaching mathematical concepts of mentioned areas, and distance education technologies would be indispensable for consolidation of successfully passed topics

Two-Cloud-Servers-Assisted Secure Outsourcing Multiparty Computation

Science.gov (United States)

Wen, Qiaoyan; Zhang, Hua; Jin, Zhengping; Li, Wenmin

2014-01-01

We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users' public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function. PMID:24982949

Two-cloud-servers-assisted secure outsourcing multiparty computation.

Science.gov (United States)

Sun, Yi; Wen, Qiaoyan; Zhang, Yudong; Zhang, Hua; Jin, Zhengping; Li, Wenmin

2014-01-01

We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users' public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function.

Computer-assisted diagnosis of melanoma.

Science.gov (United States)

Fuller, Collin; Cellura, A Paul; Hibler, Brian P; Burris, Katy

2016-03-01

The computer-assisted diagnosis of melanoma is an exciting area of research where imaging techniques are combined with diagnostic algorithms in an attempt to improve detection and outcomes for patients with skin lesions suspicious for malignancy. Once an image has been acquired, it undergoes a processing pathway which includes preprocessing, enhancement, segmentation, feature extraction, feature selection, change detection, and ultimately classification. Practicality for everyday clinical use remains a vital question. A successful model must obtain results that are on par or outperform experienced dermatologists, keep costs at a minimum, be user-friendly, and be time efficient with high sensitivity and specificity. ©2015 Frontline Medical Communications.

A news media analysis of economic sanction effects on access to medicine in Iran

Science.gov (United States)

Kheirandish, Mehrnaz; Rashidian, Arash; Bigdeli, Maryam

2015-01-01

Objective: In the past decades economic sanctions have been used by different countries or international organizations in order to deprive target countries of some transactions. While the sanctions do not target health care systems or public health structures, they may, in fact, affect the availability of health care in target countries. In this study, we used media analysis to assess the impacts of recent sanctions imposed by the Central Bank of Iran in 2012 on access to medicines in Iran. Methods: We searched different sources of written news media including a database of nonspecialized weeklies and magazines, online news sources, web pages of daily newspapers and healthcare oriented weeklies from 2011 to 2013. We searched the sources using the general term “medicine” to reduce the chances of missing relevant items. The identified news media were read, and categorized under three groups of items announcing “shortage of medicines,” “medicines related issues” and “no shortage.” We conducted trend analyzes to see whether the news media related to access to medicines were affected by the economic sanctions. Findings: A total number of 371 relevant news media were collected. The number of news media related to medicines substantially increased in the study period: 30 (8%), 161 (43%) and 180 (49%) were published in 2011, 2012 and 2013, respectively. While 145 (39%) of media items referred to the shortage of medicines, 97 (26%) reported no shortage or alleviating of concerns. Conclusion: Media analysis suggests a clear increase in the number of news media reporting a shortage in Iran after the sanctions. In 2013, there were accompanying increases in the number of news media reporting alleviation of the shortages of medicines. Our analysis provides evidence of negative effects of the sanctions on access to medicines in Iran. PMID:26645026

Rules and economic features connected with adoption and medical assisted reproduction

Directory of Open Access Journals (Sweden)

Hemion Braho

2015-07-01

Full Text Available The aim of this brief study is to analyze the phenomenon of adoption and the assisted reproductive technologies, not from a social point of view as experts often do, but on an economic point of view. This could be possible analyzing first of all the laws regulating these “markets” and the influence of this regulation on the economic aspects. Although it could seem immoral to study this social aspects connected with filiation, we know that the social desire of some parents or some individuals to have children and their possibility is oriented by laws, economic possibilities and economy in general. This study is based on an empirical methodology, taking as study-case Italy and trying not to give any ethic orientation.

The current status and future prospects of computer-assisted hip surgery.

Science.gov (United States)

Inaba, Yutaka; Kobayashi, Naomi; Ike, Hiroyuki; Kubota, So; Saito, Tomoyuki

2016-03-01

The advances in computer assistance technology have allowed detailed three-dimensional preoperative planning and simulation of preoperative plans. The use of a navigation system as an intraoperative assistance tool allows more accurate execution of the preoperative plan, compared to manual operation without assistance of the navigation system. In total hip arthroplasty using CT-based navigation, three-dimensional preoperative planning with computer software allows the surgeon to determine the optimal angle of implant placement at which implant impingement is unlikely to occur in the range of hip joint motion necessary for daily activities of living, and to determine the amount of three-dimensional correction for leg length and offset. With the use of computer navigation for intraoperative assistance, the preoperative plan can be precisely executed. In hip osteotomy using CT-based navigation, the navigation allows three-dimensional preoperative planning, intraoperative confirmation of osteotomy sites, safe performance of osteotomy even under poor visual conditions, and a reduction in exposure doses from intraoperative fluoroscopy. Positions of the tips of chisels can be displayed on the computer monitor during surgery in real time, and staff other than the operator can also be aware of the progress of surgery. Thus, computer navigation also has an educational value. On the other hand, its limitations include the need for placement of trackers, increased radiation exposure from preoperative CT scans, and prolonged operative time. Moreover, because the position of a bone fragment cannot be traced after osteotomy, methods to find its precise position after its movement need to be developed. Despite the need to develop methods for the postoperative evaluation of accuracy for osteotomy, further application and development of these systems are expected in the future. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

Effectiveness of Computer-Assisted Mathematics Education (CAME) over Academic Achievement: A Meta-Analysis Study

Science.gov (United States)

Demir, Seda; Basol, Gülsah

2014-01-01

The aim of the current study is to determine the overall effects of Computer-Assisted Mathematics Education (CAME) on academic achievement. After an extensive review of the literature, studies using Turkish samples and observing the effects of Computer-Assisted Education (CAE) on mathematics achievement were examined. As a result of this…

45 CFR 233.34 - Computing the assistance payment in the initial one or two months (AFDC).

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Computing the assistance payment in the initial... § 233.34 Computing the assistance payment in the initial one or two months (AFDC). A State shall compute...) If the initial month is computed prospectively as in paragraph (a) of this section, the second month...

A Look at Computer-Assisted Testing Operations. The Illinois Series on Educational Application of Computers, No. 12e.

Science.gov (United States)

Muiznieks, Viktors; Dennis, J. Richard

In computer assisted test construction (CATC) systems, the computer is used to perform the mechanical aspects of testing while the teacher retains control over question content. Advantages of CATC systems include question banks, decreased importance of test item security, computer analysis and response to student test answers, item analysis…

Economic Evaluation of Complementary and Alternative Medicine in Oncology: Is There a Difference Compared to Conventional Medicine?

Science.gov (United States)

Huebner, Jutta; Prott, Franz J; Muecke, Ralph; Stoll, Christoph; Buentzel, Jens; Muenstedt, Karsten; Micke, Oliver

2017-01-01

To analyze the financial burden of complementary and alternative medicine (CAM) in cancer treatment. Based on a systematic search of the literature (Medline and the Cochrane Library, combining the MeSH terms 'complementary therapies', 'neoplasms', 'costs', 'cost analysis', and 'cost-benefit analysis'), an expert panel discussed different types of analyses and their significance for CAM in oncology. Of 755 publications, 43 met our criteria. The types of economic analyses and their parameters discussed for CAM in oncology were cost, cost-benefit, cost-effectiveness, and cost-utility analyses. Only a few articles included arguments in favor of or against these different methods, and only a few arguments were specific for CAM because most CAM methods address a broad range of treatment aim parameters to assess effectiveness and are hard to define. Additionally, the choice of comparative treatments is difficult. To evaluate utility, healthy subjects may not be adequate as patients with a life-threatening disease and may be judged differently, especially with respect to a holistic treatment approach. We did not find any arguments in the literature that were directed at the economic analysis of CAM in oncology. Therefore, a comprehensive approach assessment based on criteria from evidence-based medicine evaluating direct and indirect costs is recommended. The usual approaches to conventional medicine to assess costs, benefits, and effectiveness seem adequate in the field of CAM in oncology. Additionally, a thorough deliberation on the comparator, endpoints, and instruments is mandatory for designing studies. © 2016 S. Karger AG, Basel.

Applications of NLP Techniques to Computer-Assisted Authoring of Test Items for Elementary Chinese

Science.gov (United States)

Liu, Chao-Lin; Lin, Jen-Hsiang; Wang, Yu-Chun

2010-01-01

The authors report an implemented environment for computer-assisted authoring of test items and provide a brief discussion about the applications of NLP techniques for computer assisted language learning. Test items can serve as a tool for language learners to examine their competence in the target language. The authors apply techniques for…

[Clinical analysis of 12 cases of orthognathic surgery with digital computer-assisted technique].

Science.gov (United States)

Tan, Xin-ying; Hu, Min; Liu, Chang-kui; Liu, Hua-wei; Liu, San-xia; Tao, Ye

2014-06-01

This study was to investigate the effect of the digital computer-assisted technique in orthognathic surgery. Twelve patients from January 2008 to December 2011 with jaw malformation were treated in our department. With the help of CT and three-dimensional reconstruction technique, 12 patients underwent surgical treatment and the results were evaluated after surgery. Digital computer-assisted technique could clearly show the status of the jaw deformity and assist virtual surgery. After surgery all patients were satisfied with the results. Digital orthognathic surgery can improve the predictability of the surgical procedure, and to facilitate patients' communication, shorten operative time, and reduce patients' pain.

Biotechnology Computing: Information Science for the Era of Molecular Medicine.

Science.gov (United States)

Masys, Daniel R.

1989-01-01

The evolution from classical genetics to biotechnology, an area of research involving key macromolecules in living cells, is chronicled and the current state of biotechnology is described, noting related advances in computing and clinical medicine. (MSE)

[Application of image recognition technology in census of national traditional Chinese medicine resources].

Science.gov (United States)

Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Shi, Ting-Ting; Wang, Hui; Li, Meng; Jing, Zhi-Xian; Guo, Lan-Ping; Huang, Lu-Qi

2017-11-01

With the development of computer and image processing technology, image recognition technology has been applied to the national medicine resources census work at all stages.Among them: ①In the preparatory work, in order to establish a unified library of traditional Chinese medicine resources, using text recognition technology based on paper materials, be the assistant in the digitalization of various categories related to Chinese medicine resources; to determine the representative area and plots of the survey from each census team, based on the satellite remote sensing image and vegetation map and other basic data, using remote sensing image classification and other technical methods to assist in determining the key investigation area. ②In the process of field investigation, to obtain the planting area of Chinese herbal medicine was accurately, we use the decision tree model, spectral feature and object-oriented method were used to assist the regional identification and area estimation of Chinese medicinal materials.③In the process of finishing in the industry, in order to be able to relatively accurately determine the type of Chinese medicine resources in the region, based on the individual photos of the plant, the specimens and the name of the use of image recognition techniques, to assist the statistical summary of the types of traditional Chinese medicine resources. ④In the application of the results of transformation, based on the pharmaceutical resources and individual samples of medicinal herbs, the development of Chinese medicine resources to identify APP and authentic herbs 3D display system, assisted the identification of Chinese medicine resources and herbs identification characteristics. The introduction of image recognition technology in the census of Chinese medicine resources, assisting census personnel to carry out related work, not only can reduce the workload of the artificial, improve work efficiency, but also improve the census results

Computer Models and Automata Theory in Biology and Medicine

CERN Document Server

Baianu, I C

2004-01-01

The applications of computers to biological and biomedical problem solving goes back to the very beginnings of computer science, automata theory [1], and mathematical biology [2]. With the advent of more versatile and powerful computers, biological and biomedical applications of computers have proliferated so rapidly that it would be virtually impossible to compile a comprehensive review of all developments in this field. Limitations of computer simulations in biology have also come under close scrutiny, and claims have been made that biological systems have limited information processing power [3]. Such general conjectures do not, however, deter biologists and biomedical researchers from developing new computer applications in biology and medicine. Microprocessors are being widely employed in biological laboratories both for automatic data acquisition/processing and modeling; one particular area, which is of great biomedical interest, involves fast digital image processing and is already established for rout...

Social-economic profile of asthmatic patients assisted at a Nucleus of Integrated Medical Assistance - doi:10.5020/18061230.2008.p180

Directory of Open Access Journals (Sweden)

Anisia Torquilho Praxedes

2012-01-01

Full Text Available Objective: To determine the social-economic profile of asthmatic patients who use the health services rendered by the Nucleus of Integrated Medical Assistance (NAMI, in Fortaleza- Ce. Methods: This descriptive, retrospective and cross-sectional study, of a quantitative approach, had a sample comprised by 40 asthmatic patients assisted at NAMI during the period of April to May, 2006. The data collection was accomplished by means of a standard semi-structured interview, with open and closed questions. Results: The age range between 0 to 5 years old represented the greater percentage of patients, thus obtaining 60.0% of the answered questionnaires. According to social-economic conditions, 55.0% were illiterate or were learning to read, 75.0% were using some drug prescribed at NAMI, 72.5% fully ignored the disease, 52.5% recognized the factors that triggered the asthmatic crisis and 55.0% said having often crisis. Seventy per cent (70.0% of the interviewed showed some difficulty related to the use of the drugs; 47.5% referred having different problems related to the access to the medications. Conclusion: By the analysis of the determined social-economic profile of asthmatics patients assisted at NAMI, it is concluded that great part of them are people with little instruction, due to the social exclusion in which they are found; being the majority of them children of female gender. NCT00722657

Integrating Computer-Assisted Language Learning in Saudi Schools: A Change Model

Science.gov (United States)

Alresheed, Saleh; Leask, Marilyn; Raiker, Andrea

2015-01-01

Computer-assisted language learning (CALL) technology and pedagogy have gained recognition globally for their success in supporting second language acquisition (SLA). In Saudi Arabia, the government aims to provide most educational institutions with computers and networking for integrating CALL into classrooms. However, the recognition of CALL's…

Transfer of computer processed pictures for nuclear medicine to cassette VTR

Energy Technology Data Exchange (ETDEWEB)

Komaya, A; Takahashi, K; Suzuki, T [Yamagata Univ. (Japan)

1980-05-01

With the increasing clinical importance of data-processing computers in nuclear medicine, the applications are now widely established. As for the output methods and output devices of data, processed pictures, and animation pictures, contrivance is necessary for the easy appreciation and utilization of the information obtained. In the cine-mode display of heart wall motion in particular, it is desirable to reproduce conveniently the output images as animated for image reading at any time or place. The apparatus for this purpose has been completed by using an ordinary home-use cassette VTR and a video monitor. The computer output pictures as nuclear medicine data are recorded in the VTR. Recording and reprocuction are possible only by a few additional components and some adjustments. Animation pictures such as the cine-mode display of heart wall motion can be conveniently reproduced for image reading, away from computers.

Assisted supervision of a computer aided tele-operation system

Energy Technology Data Exchange (ETDEWEB)

Le Bars, H; Gravez, P; Fournier, R

1994-12-31

This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs.

Assisted supervision of a computer aided tele-operation system

International Nuclear Information System (INIS)

Le Bars, H.; Gravez, P.; Fournier, R.

1994-01-01

This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs

Computational biomechanics for medicine from algorithms to models and applications

CERN Document Server

Joldes, Grand; Nielsen, Poul; Doyle, Barry; Miller, Karol

2017-01-01

This volume comprises the latest developments in both fundamental science and patient-specific applications, discussing topics such as: cellular mechanics; injury biomechanics; biomechanics of heart and vascular system; medical image analysis; and both patient-specific fluid dynamics and solid mechanics simulations. With contributions from researchers world-wide, the Computational Biomechanics for Medicine series of titles provides an opportunity for specialists in computational biomechanics to present their latest methodologies and advancements.

Heterogeneous Computing in Economics: A Simplified Approach

DEFF Research Database (Denmark)

Dziubinski, Matt P.; Grassi, Stefano

This paper shows the potential of heterogeneous computing in solving dynamic equilibrium models in economics. We illustrate the power and simplicity of the C++ Accelerated Massive Parallelism recently introduced by Microsoft. Starting from the same exercise as Aldrich et al. (2011) we document a ...

Center for Advanced Energy Studies: Computer Assisted Virtual Environment (CAVE)

Data.gov (United States)

Federal Laboratory Consortium — The laboratory contains a four-walled 3D computer assisted virtual environment - or CAVE TM — that allows scientists and engineers to literally walk into their data...

Computer-assisted power plant management

International Nuclear Information System (INIS)

Boettcher, D.

1990-01-01

Operating a power plant and keeping it operational is ensured by a multiplicity of technical management subtasks which are cross referenced and based on an extensive inventory of descriptive and operational plant data. These data stocks are still registered in an isolated mode and managed and updated manually. This is a labor intensive, error prone procedure. In this situation, the introduction of a computer-assisted plant management system, whose core is a data-base of assured quality common to all activities, and which contains standardized processing aids fully planned for the subtasks occurring in the plant, is likely to achieve a considerable improvement in the quality of plant management and to relieve the staff of administrative activities. (orig.) [de

Computer assisted surgery in preoperative planning of acetabular fracture surgery: state of the art.

Science.gov (United States)

Boudissa, Mehdi; Courvoisier, Aurélien; Chabanas, Matthieu; Tonetti, Jérôme

2018-01-01

The development of imaging modalities and computer technology provides a new approach in acetabular surgery. Areas covered: This review describes the role of computer-assisted surgery (CAS) in understanding of the fracture patterns, in the virtual preoperative planning of the surgery and in the use of custom-made plates in acetabular fractures with or without 3D printing technologies. A Pubmed internet research of the English literature of the last 20 years was carried out about studies concerning computer-assisted surgery in acetabular fractures. The several steps for CAS in acetabular fracture surgery are presented and commented by the main author regarding to his personal experience. Expert commentary: Computer-assisted surgery in acetabular fractures is still initial experiences with promising results. Patient-specific biomechanical models considering soft tissues should be developed to allow a more realistic planning.

Mid-term survival analysis of closed wedge high tibial osteotomy: A comparative study of computer-assisted and conventional techniques.

Science.gov (United States)

Bae, Dae Kyung; Song, Sang Jun; Kim, Kang Il; Hur, Dong; Jeong, Ho Yeon

2016-03-01

The purpose of the present study was to compare the clinical and radiographic results and survival rates between computer-assisted and conventional closing wedge high tibial osteotomies (HTOs). Data from a consecutive cohort comprised of 75 computer-assisted HTOs and 75 conventional HTOs were retrospectively reviewed. The Knee Society knee and function scores, Hospital for Special Surgery (HSS) score and femorotibial angle (FTA) were compared between the two groups. Survival rates were also compared with procedure failure. The knee and function scores at one year postoperatively were slightly better in the computer-assisted group than those in conventional group (90.1 vs. 86.1) (82.0 vs. 76.0). The HSS scores at one year postoperatively were slightly better for the computer-assisted HTOs than those of conventional HTOs (89.5 vs. 81.8). The inlier of the postoperative FTA was wider in the computer-assisted group than that in the conventional HTO group (88.0% vs. 58.7%), and mean postoperative FTA was greater in the computer-assisted group that in the conventional HTO group (valgus 9.0° vs. valgus 7.6°, pclinical and radiographic results were better in the computer-assisted group that those in the conventional HTO group. Mid-term survival rates did not differ between computer-assisted and conventional HTOs. A comparative analysis of longer-term survival rate is required to demonstrate the long-term benefit of computer-assisted HTO. III. Copyright © 2015 Elsevier B.V. All rights reserved.

Two-Cloud-Servers-Assisted Secure Outsourcing Multiparty Computation

Directory of Open Access Journals (Sweden)

Yi Sun

2014-01-01

Full Text Available We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users’ public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function.

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances

Science.gov (United States)

Zou, Bin; Xing, Minjie; Wang, Yuping; Sun, Mingyu; Xiang, Catherine H.

2013-01-01

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances highlights new research and an original framework that brings together foreign language teaching, experiments and testing practices that utilize the most recent and widely used e-learning resources. This comprehensive collection of research will offer linguistic…

The Effects of Computer-Assisted Feedback Strategies in Technology Education: A Comparison of Learning Outcomes

Science.gov (United States)

Adams, Ruifang Hope; Strickland, Jane

2012-01-01

This study investigated the effects of computer-assisted feedback strategies that have been utilized by university students in a technology education curriculum. Specifically, the study examined the effectiveness of the computer-assisted feedback strategy "Knowledge of Response feedback" (KOR), and the "Knowledge of Correct Responses feedback"…

Computer-assisted spectral design and synthesis

Science.gov (United States)

Vadakkumpadan, Fijoy; Wang, Qiqi; Sun, Yinlong

2005-01-01

In this paper, we propose a computer-assisted approach for spectral design and synthesis. This approach starts with some initial spectrum, modifies it interactively, evaluates the change, and decides the optimal spectrum. Given a requested change as function of wavelength, we model the change function using a Gaussian function. When there is the metameric constraint, from the Gaussian function of request change, we propose a method to generate the change function such that the result spectrum has the same color as the initial spectrum. We have tested the proposed method with different initial spectra and change functions, and implemented an interactive graphics environment for spectral design and synthesis. The proposed approach and graphics implementation for spectral design and synthesis can be helpful for a number of applications such as lighting of building interiors, textile coloration, and pigment development of automobile paints, and spectral computer graphics.

Three-Dimensional Computer-Assisted Two-Layer Elastic Models of the Face.

Science.gov (United States)

Ueda, Koichi; Shigemura, Yuka; Otsuki, Yuki; Fuse, Asuka; Mitsuno, Daisuke

2017-11-01

To make three-dimensional computer-assisted elastic models for the face, we decided on five requirements: (1) an elastic texture like skin and subcutaneous tissue; (2) the ability to take pen marking for incisions; (3) the ability to be cut with a surgical knife; (4) the ability to keep stitches in place for a long time; and (5) a layered structure. After testing many elastic solvents, we have made realistic three-dimensional computer-assisted two-layer elastic models of the face and cleft lip from the computed tomographic and magnetic resonance imaging stereolithographic data. The surface layer is made of polyurethane and the inner layer is silicone. Using this elastic model, we taught residents and young doctors how to make several typical local flaps and to perform cheiloplasty. They could experience realistic simulated surgery and understand three-dimensional movement of the flaps.

Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous MultiCore Systems

Science.gov (United States)

2017-04-13

AFRL-AFOSR-UK-TR-2017-0029 Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous MultiCore Systems ...2012, “ Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous MultiCore Systems .” 2. The objective...2012 - 01/25/2015 4. TITLE AND SUBTITLE Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous

The use of computer graphics to assist in-reactor operations

International Nuclear Information System (INIS)

Smith, A.L.

1995-01-01

A number of complex inspection and repair tasks have been carried out inside Nuclear Electric's gas cooled reactors using multi-link manipulators. The paper describes how computer graphics are integrated into the manipulator system and perform a key role during many phases of a project. Graphics simulation is used to assist with conceptual design, detailed path planning, rehearsals, quality assurance, demonstrations and, critically, as an on-line tool to assist the real-time operation of the equipment whilst performing complex in-reactor tasks. The techniques used are illustrated by recent examples of use to assist the inspection and repair of in-reactor components. (Author)

Japan – China: Official Development Assistance as a Tool of Economic Interaction

Directory of Open Access Journals (Sweden)

Eugene Borisovich Kovrigin

2012-09-01

Full Text Available The paper deals with the outstanding role and implications of Japan’s ODA to the People’s Republic of China in the bilateral relations from the early 1980s till its termination in the 2000s. Being by far the biggest single provider of low-interest loans and grants to a state with a totally different political system Japan sought to achieve its own economic and political aims. The controversial nature of government financial flows from Tokyo to Beijing resulted in substantial economic gains (foreign trade and direct investment and vice versa a disappointment in the political realm. The paper reveals peculiarities of Japan’s ODA to the PRC in the framework of international economic relations, its significance for the modernization of China’s industrial and social infrastructure, unparalleled conditions for receiving Japanese aid which were imposed by China’s authorities, the change of public opinion in Japan towards the problem, etc. The article also explores the current transformation of China from the status of leading recipient of Japanese assistance to Japan’s successful «competitor» as a donor of financial resources and technical assistance to the numerous nations of Africa, Southeast Asia and other regions

Rediscovering the Economics of Keynes in an Agent-Based Computational Setting

DEFF Research Database (Denmark)

Bruun, Charlotte

2016-01-01

The aim of this paper is to use agent-based computational economics to explore the economic thinking of Keynes. Taking his starting point at the macroeconomic level, Keynes argued that economic systems are characterized by fundamental uncertainty — an uncertainty that makes rule-based behavior...

Public Computer Assisted Learning Facilities for Children with Visual Impairment: Universal Design for Inclusive Learning

Science.gov (United States)

Siu, Kin Wai Michael; Lam, Mei Seung

2012-01-01

Although computer assisted learning (CAL) is becoming increasingly popular, people with visual impairment face greater difficulty in accessing computer-assisted learning facilities. This is primarily because most of the current CAL facilities are not visually impaired friendly. People with visual impairment also do not normally have access to…

Applying Integrated Computer Assisted Media (ICAM in Teaching Vocabulary

Directory of Open Access Journals (Sweden)

Opick Dwi Indah

2015-02-01

Full Text Available The objective of this research was to find out whether the use of integrated computer assisted media (ICAM is effective to improve the vocabulary achievement of the second semester students of Cokroaminoto Palopo University. The population of this research was the second semester students of English department of Cokroaminoto Palopo University in academic year 2013/2014. The samples of this research were 60 students and they were placed into two groups: experimental and control group where each group consisted of 30 students. This research used cluster random sampling technique. The research data was collected by applying vocabulary test and it was analyzed by using descriptive and inferential statistics. The result of this research was integrated computer assisted media (ICAM can improve vocabulary achievement of the students of English department of Cokroaminoto Palopo University. It can be concluded that the use of ICAM in the teaching vocabulary is effective to be implemented in improving the students’ vocabulary achievement.

Integrative Medicine in Preventive Medicine Education

OpenAIRE

Jani, Asim A.; Trask, Jennifer; Ali, Ather

2015-01-01

During 2012, the USDHHS?s Health Resources and Services Administration funded 12 accredited preventive medicine residencies to incorporate an evidence-based integrative medicine curriculum into their training programs. It also funded a national coordinating center at the American College of Preventive Medicine, known as the Integrative Medicine in Preventive Medicine Education (IMPriME) Center, to provide technical assistance to the 12 grantees. To help with this task, the IMPriME Center esta...

Rediscovering the Economics of Keynes in an Agent-Based Computational Setting

DEFF Research Database (Denmark)

Bruun, Charlotte

The aim of this paper is to use agent-based computational economics to explore the economic thinking of Keynes. Taking his starting point at the macroeconomic level, Keynes argued that economic systems are characterized by fundamental uncertainty - an uncertainty that makes rule-based behaviour...... and reliance on monetary magnitudes more optimal to the economic agent than profit- and utility optimazation in the traditional sense. Unfortunately more systematic studies of the properties of such a system was not possible at the time of Keynes. The system envisioned by Keynes holds a lot of properties...... in commen with what we today call complex dynamic systems, and today we may aply the method of agent-based computational economics to the ideas of Keynes. The presented agent-based Keynesian model demonstrate, as argued by Keynes, that the economy can selforganize without relying on price movement...

Ionic liquid-based microwave-assisted extraction of rutin from Chinese medicinal plants.

Science.gov (United States)

Zeng, Huan; Wang, Yuzhi; Kong, Jinhuan; Nie, Chan; Yuan, Ya

2010-12-15

An ionic liquid-based microwave-assisted extraction (ILMAE) method has been developed for the effective extraction of rutin from Chinese medicinal plants including Saururus chinensis (Lour.) Bail. (S. chinensis) and Flos Sophorae. A series of 1-butyl-3-methylimidazolium ionic liquids with different anions were investigated. The results indicated that the characteristics of anions have remarkable effects on the extraction efficiency of rutin and among the investigated ionic liquids, 1-butyl-3-methylimidazolium bromide ([bmim]Br) aqueous solution was the best. In addition, the ILMAE procedures for the two kinds of medicinal herbs were also optimized by means of a series of single factor experiments and an L(9) (3(4)) orthogonal design. Compared with the optimal ionic liquid-based heating extraction (ILHE), marinated extraction (ILME), ultrasonic-assisted extraction (ILUAE), the optimized approach of ILMAE gained higher extraction efficiency which is 4.879 mg/g in S. chinensis with RSD 1.33% and 171.82 mg/g in Flos Sophorae with RSD 1.47% within the shortest extraction time. Reversed phase high performance liquid chromatography (RP-HPLC) with ultraviolet detection was employed for the analysis of rutin in Chinese medicinal plants. Under the optimum conditions, the average recoveries of rutin from S. chinensis and Flos Sophorae were 101.23% and 99.62% with RSD lower than 3%, respectively. The developed approach is linear at concentrations from 42 to 252 mg L(-1) of rutin solution, with the regression coefficient (r) at 0.99917. Moreover, the extraction mechanism of ILMAE and the microstructures and chemical structures of the two researched samples before and after extraction were also investigated. With the help of LC-MS, it was future demonstrated that the two researched herbs do contain active ingredient of rutin and ionic liquids would not influence the structure of rutin. Copyright © 2010 Elsevier B.V. All rights reserved.

Accuracy of treatment planning based on stereolithography in computer assisted surgery

International Nuclear Information System (INIS)

Schicho, Kurt; Figl, Michael; Seemann, Rudolf; Ewers, Rolf; Lambrecht, J. Thomas; Wagner, Arne; Watzinger, Franz; Baumann, Arnulf; Kainberger, Franz; Fruehwald, Julia; Klug, Clemens

2006-01-01

Three-dimensional stereolithographic models (SL models), made of solid acrylic resin derived from computed-tomography (CT) data, are an established tool for preoperative treatment planning in numerous fields of medicine. An innovative approach, combining stereolithography with computer-assisted point-to-point navigation, can support the precise surgical realization of a plan that has been defined on an SL model preoperatively. The essential prerequisites for the application of such an approach are: (1) The accuracy of the SL models (including accuracy of the CT scan and correspondence of the model with the patient's anatomy) and (2) the registration method used for the transfer of the plan from the SL model to the patient (i.e., whether the applied registration markers can be added to the SL model corresponding to the markers at the patient with an accuracy that keeps the ''cumulative error'' at the end of the chain of errors, in the order of the accuracy of contemporary navigation systems). In this study, we focus on these two topics: By applying image-matching techniques, we fuse the original CT data of the patient with the corresponding CT data of the scanned SL model, and measure the deviations of defined parameter (e.g., distances between anatomical points). To evaluate the registration method used for the planning transfer, we apply a point-merge algorithm, using four marker points that should be located at exactly corresponding positions at the patient and at connective bars that are added to the surface of the SL model. Again, deviations at defined anatomical structures are measured and analyzed statistically. Our results prove sufficient correspondence of the two data sets and accuracy of the registration method for routine clinical application. The evaluation of the SL model accuracy revealed an arithmetic mean of the relative deviations from 0.8% to 5.4%, with an overall mean deviation of 2.2%. Mean deviations of the investigated anatomical structures

Technical assistance and the transfer of remote sensing technology. [for economic development

Science.gov (United States)

Chipman, R.

1977-01-01

The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

The Impact of Computer-Assisted Instruction on Secondary School ...

African Journals Online (AJOL)

This research, carried out in Manicaland Province in Zimbabwe, aimed to investigate the impact of computer-assisted instruction on students' performance in Geography. The equivalent group research design which included a pre-test post-test control group design was used. Respondents to interviews and pre-test and ...

Computer assisted radionuclide angiography to confirm reversible ischemic cerebral dysfunction

International Nuclear Information System (INIS)

Buell, U.; Lanksch, W.; Tosch, U.; Kleinhans, E.; Steinhoff, H.

1982-01-01

Computer assisted radionuclide angiography (CARNA) was employed in patients with transient ischemic attack (TIA) or prolonged reversible ischemic neurologic deficit (PRIND) to establish the sensitivity of CARNA in detecting and quantifying changes of cerebral perfusion in such selected patients. Moreover, results of CARNA were compared with findings of cranial radiographic angiography (RGA) to obtain data on combined sensitivities of these methods. CARNA may be the preferred noninvasive procedure employed because it detects and quantifies the vascular supply disorder in patients with TIA and PRIND. If no computer assistance is used to evaluate cranial radionuclide angiography, results are considerable less accurate. Specifity of CARNA is 84.6%. If CARNA is negative (25.2% in TIA; 12.7% in PRIND), a further method must be employed to confirm the cranial vascular origin of the attack. This may be RGA in TIA and transmission computed axial tomography (T-CAT) T-CAT in PRIND. This diagnos - tic sequence lead to 92.4% true positive in TIA and to 93.2% true positives in PRIND

Agent assisted interactive algorithm for computationally demanding multiobjective optimization problems

OpenAIRE

Ojalehto, Vesa; Podkopaev, Dmitry; Miettinen, Kaisa

2015-01-01

We generalize the applicability of interactive methods for solving computationally demanding, that is, time-consuming, multiobjective optimization problems. For this purpose we propose a new agent assisted interactive algorithm. It employs a computationally inexpensive surrogate problem and four different agents that intelligently update the surrogate based on the preferences specified by a decision maker. In this way, we decrease the waiting times imposed on the decision maker du...

Surface Modeling, Solid Modeling and Finite Element Modeling. Analysis Capabilities of Computer-Assisted Design and Manufacturing Systems.

Science.gov (United States)

Nee, John G.; Kare, Audhut P.

1987-01-01

Explores several concepts in computer assisted design/computer assisted manufacturing (CAD/CAM). Defines, evaluates, reviews and compares advanced computer-aided geometric modeling and analysis techniques. Presents the results of a survey to establish the capabilities of minicomputer based-systems with the CAD/CAM packages evaluated. (CW)

Interactive computer-assisted instruction in acid-base physiology for mobile computer platforms.

Science.gov (United States)

Longmuir, Kenneth J

2014-03-01

In this project, the traditional lecture hall presentation of acid-base physiology in the first-year medical school curriculum was replaced by interactive, computer-assisted instruction designed primarily for the iPad and other mobile computer platforms. Three learning modules were developed, each with ∼20 screens of information, on the subjects of the CO2-bicarbonate buffer system, other body buffer systems, and acid-base disorders. Five clinical case modules were also developed. For the learning modules, the interactive, active learning activities were primarily step-by-step learner control of explanations of complex physiological concepts, usually presented graphically. For the clinical cases, the active learning activities were primarily question-and-answer exercises that related clinical findings to the relevant basic science concepts. The student response was remarkably positive, with the interactive, active learning aspect of the instruction cited as the most important feature. Also, students cited the self-paced instruction, extensive use of interactive graphics, and side-by-side presentation of text and graphics as positive features. Most students reported that it took less time to study the subject matter with this online instruction compared with subject matter presented in the lecture hall. However, the approach to learning was highly examination driven, with most students delaying the study of the subject matter until a few days before the scheduled examination. Wider implementation of active learning computer-assisted instruction will require that instructors present subject matter interactively, that students fully embrace the responsibilities of independent learning, and that institutional administrations measure instructional effort by criteria other than scheduled hours of instruction.

Pre-Service Teachers' Uses of and Barriers from Adopting Computer-Assisted Language Learning (CALL) Programs

Science.gov (United States)

Samani, Ebrahim; Baki, Roselan; Razali, Abu Bakar

2014-01-01

Success in implementation of computer-assisted language learning (CALL) programs depends on the teachers' understanding of the roles of CALL programs in education. Consequently, it is also important to understand the barriers teachers face in the use of computer-assisted language learning (CALL) programs. The current study was conducted on 14…

Computer-assisted training experiment used in the field of thermal energy production (EDF)

International Nuclear Information System (INIS)

Felgines, R.

1982-01-01

In 1981, the EDF carried out an experiment with computer-assisted training (EAO). This new approach, which continued until June 1982, involved about 700 employees all of whom operated nuclear power stations. The different stages of this experiment and the lessons which can be drawn from it are given the lessons were of a positive nature and make it possible to envisage complete coverage of all nuclear power stations by computer-assisted training within a very short space of time [fr

[Computer-assisted navigation in orthognathic surgery. Application to Le Fort I osteotomy.

Science.gov (United States)

Benassarou, M; Benassarou, A; Meyer, C

2013-08-05

Computer-assisted navigation is a tool that allows the surgeon to reach intraoperatively a previously defined target. This technique can be applied to the positioning of bone fragments in orthognathic surgery. It is not used routinely yet because there are no specifically dedicated systems available on the market for this kind of surgery. The goal of our study was to describe the various systems that could be used in orthognathic surgery and to report our experience of computer-assisted surgery in the positioning of the maxilla during maxillomandibular osteotomies. Copyright © 2013. Published by Elsevier Masson SAS.

Computer-assisted modeling: Contributions of computational approaches to elucidating macromolecular structure and function: Final report

International Nuclear Information System (INIS)

Walton, S.

1987-01-01

The Committee, asked to provide an assessment of computer-assisted modeling of molecular structure, has highlighted the signal successes and the significant limitations for a broad panoply of technologies and has projected plausible paths of development over the next decade. As with any assessment of such scope, differing opinions about present or future prospects were expressed. The conclusions and recommendations, however, represent a consensus of our views of the present status of computational efforts in this field

Aspects of Mathematical Modelling Applications in Science, Medicine, Economics and Management

CERN Document Server

Hosking, Roger J

2008-01-01

The construction of mathematical models is an essential scientific activity. Mathematics has long been associated with developments in the exact sciences and engineering, but more recently mathematical modelling has been used to investigate complex systems that arise in many other fields. The contributors to this book demonstrate the application of mathematics to modern research topics in ecology and environmental science, health and medicine, phylogenetics and neural networks, theoretical chemistry, economics and management.

New categories for traditional medicine in the Economic Botany Data Collection Standard.

Science.gov (United States)

Gruca, Marta; Cámara-Leret, Rodrigo; Macía, Manuel J; Balslev, Henrik

2014-09-11

The Economic Botany Data Collection Standard (EBDCS) has been successfully followed by ethnobotanists investigating plant uses in many parts of the world. However, we have encountered some cases in our study of traditional medicine where the standard seems incomplete and inaccurate when it is applied to plant uses of rural or indigenous societies in developing countries. We propose two categories to be added to the EBDCS: Cultural Diseases and Disorders, and Ritual/Magical Uses. Adding these categories, we believe will give a more accurate insight into traditional medicine and will contribute to developing an integrative ethnomedicinal data collection protocol, which will make ethnomedicinal studies more comparable. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

From computer-assisted intervention research to clinical impact: The need for a holistic approach.

Science.gov (United States)

Ourselin, Sébastien; Emberton, Mark; Vercauteren, Tom

2016-10-01

The early days of the field of medical image computing (MIC) and computer-assisted intervention (CAI), when publishing a strong self-contained methodological algorithm was enough to produce impact, are over. As a community, we now have substantial responsibility to translate our scientific progresses into improved patient care. In the field of computer-assisted interventions, the emphasis is also shifting from the mere use of well-known established imaging modalities and position trackers to the design and combination of innovative sensing, elaborate computational models and fine-grained clinical workflow analysis to create devices with unprecedented capabilities. The barriers to translating such devices in the complex and understandably heavily regulated surgical and interventional environment can seem daunting. Whether we leave the translation task mostly to our industrial partners or welcome, as researchers, an important share of it is up to us. We argue that embracing the complexity of surgical and interventional sciences is mandatory to the evolution of the field. Being able to do so requires large-scale infrastructure and a critical mass of expertise that very few research centres have. In this paper, we emphasise the need for a holistic approach to computer-assisted interventions where clinical, scientific, engineering and regulatory expertise are combined as a means of moving towards clinical impact. To ensure that the breadth of infrastructure and expertise required for translational computer-assisted intervention research does not lead to a situation where the field advances only thanks to a handful of exceptionally large research centres, we also advocate that solutions need to be designed to lower the barriers to entry. Inspired by fields such as particle physics and astronomy, we claim that centralised very large innovation centres with state of the art technology and health technology assessment capabilities backed by core support staff and open

The role and importance of economic evaluation of traditional herbal medicine use for chronic non-communicable diseases

Directory of Open Access Journals (Sweden)

Hughes GD

2015-07-01

Full Text Available Gail D Hughes,1 Oluwaseyi M Aboyade,1 John D Hill,2 Rafia S Rasu3 1South African Herbal Science and Medicine Institute, University of the Western Cape, Western Cape, South Africa; 2Department of Pharmacy, Cleveland Clinic, Cleveland, OH, 3School of Pharmacy, University of Kansas, Lawrence, KS, USA Background: Non-communicable diseases (NCD constitute major public health problems globally, with an impact on morbidity and mortality ranking high and second to HIV/AIDS. Existing studies conducted in South Africa have demonstrated that people living with NCD rely on traditional herbal medicine (THM primarily or in combination with conventional drugs. The primary research focus has been on the clinical and experimental aspects of THM use for NCD, with limited data on the economic impact of health care delivery. Therefore, the purpose of this study will be to determine the cost and utilization of resources on THM in South Africa for NCD. Materials and methods: Study describes the methods toward incorporating cost estimations and economic evaluation illustrated with the Prospective Urban and rural Epidemiological (PURE study in South Africa. The South African PURE cohort is investigating the geographic and socioeconomic influence of THM spending and utilization, variations in spending based on perceived health status, marital status, and whether spending patterns have any impact on hospitalizations and disability. Data collection and evaluation plan: Since the individual costs of THM are not regulated nor do they have a standardized price value, information obtained through this study can be utilized to assess differences and determine underlying factors contributing to spending. This insight into THM spending patterns can aid in the development and implementation of guidelines or standardized legislation governing THM use and distribution. An economic evaluation and cost estimation model has been proposed, while the data collection is still ongoing

The transfer of computer processed pictures for nuclear medicine to cassette VTR

International Nuclear Information System (INIS)

Komaya, Akio; Takahashi, Kazue; Suzuki, Toshi

1980-01-01

With the increasing clinical importance of data-processing computers in nuclear medicine, the applications are now widely established. As for the output methods and output devices of data, processed pictures, and animation pictures, contrivance is necessary for the easy appreciation and utilization of the information obtained. In the cine-mode display of heart wall motion in particular, it is desirable to reproduce conveniently the output images as animated for image reading at any time or place. The apparatus for this purpose has been completed by using an ordinary home-use cassette VTR and a video monitor. The computer output pictures as nuclear medicine data are recorded in the VTR. Recording and reprocuction are possible only by a few additional components and some adjustments. Animation pictures such as the cine-mode display of heart wall motion can be conveniently reproduced for image reading, away from computers. (J.P.N.)

Intelligent Computer-Assisted Instruction: A Review and Assessment of ICAI Research and Its Potential for Education.

Science.gov (United States)

Dede, Christopher J.; And Others

The first of five sections in this report places intelligent computer-assisted instruction (ICAI) in its historical context through discussions of traditional computer-assisted instruction (CAI) linear and branching programs; TICCIT and PLATO IV, two CAI demonstration projects funded by the National Science Foundation; generative programs, the…

The National Library of Medicine Programs and Services, Fiscal Year 1974.

Science.gov (United States)

National Library of Medicine (DHEW), Bethesda, MD.

The activities and projects of the National Library of Medicine are described. New and continuing programs in library services and operations, on-line computer retrieval services, grants for library assistance, audiovisual programs, and health communications research are included. International activities of the Library are outlined. Summary…

Effectivness of different teaching methods on ergonomics for 12-16 years old children working with computer

OpenAIRE

Jasionytė, Monika

2016-01-01

Effectivness of Different Teaching Methods on Ergonomics for 12-16 Years Old Children Working with Computer. Work author: Monika Jasionytė Work advisor: assistant Inga Raudonytė, Vilnius University faculty of Medicine Department of Rehabilitation, Physical and Sports Medicine. Main concept: ergonomics, children, methods. Work goal: figure out which teaching method is moust efficiant for 12-16 years old children, work with computer ergonomics Goals: 1. Figure out computer working place ergonom...

Feedback in Computer Assisted Pronunciation Training: When technology meets pedagogy

NARCIS (Netherlands)

Neri, A.; Cucchiarini, C.; Strik, H.

2002-01-01

Computer Assisted Language Learning (CALL) has now established itself as a prolific and fast growing area whose advantages are already well-known to educators. Yet, many authors lament the lack of a reliable integrated conceptual framework linking technology advances and second language acquisition

Does robotic assistance confer an economic benefit during laparoscopic radical nephrectomy?

Science.gov (United States)

Yang, David Y; Monn, M Francesca; Bahler, Clinton D; Sundaram, Chandru P

2014-09-01

While robotic assisted radical nephrectomy is safe with outcomes and complication rates comparable to those of the pure laparoscopic approach, there is little evidence of an economic or clinical benefit. From the 2009 to 2011 Nationwide Inpatient Sample database we identified patients 18 years old or older who underwent radical nephrectomy for primary renal malignancy. Robotic assisted and laparoscopic techniques were noted. Patients treated with the open technique and those with evidence of metastatic disease were excluded from analysis. Descriptive statistics were performed using the chi-square and Mann-Whitney tests, and the Student t-test. Multiple linear regression was done to examine factors associated with increased hospital costs and charges. We identified 24,312 radical nephrectomy cases for study inclusion, of which 7,787 (32%) were performed robotically. There was no demographic difference between robotic assisted and pure laparoscopic radical nephrectomy cases. Median total charges were $47,036 vs $38,068 for robotic assisted vs laparoscopic surgery (p robotic assisted surgery were $15,149 compared to $11,735 for laparoscopic surgery (p robotic assistance conferred an estimated $4,565 and $11,267 increase in hospital costs and charges, respectively, when adjusted for adapted Charlson comorbidity index score, perioperative complications and length of stay (p Robotic assisted radical nephrectomy results in increased medical expense without improving patient morbidity. Assuming surgeon proficiency with pure laparoscopy, robotic technology should be reserved primarily for complex surgeries requiring reconstruction. Traditional laparoscopic techniques should continue to be used for routine radical nephrectomy. Copyright © 2014 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

COMPUTER ASSISTED LOOM IN THE REVIVAL OF CONTEMPORARY MONUMENTAL TAPESTRY

Directory of Open Access Journals (Sweden)

PINTILIE Anca-Aurelia

2015-05-01

Full Text Available The art of tapestry has its basics back in time, probably in the decorations of tent, the house of the nomad. Tapestry in its beginnings is the first wall of the nomad’s home and the decorative wall and canopy in the ancient Greek houses as architect Gottfried Semper stated in the nineteen century. The architectural approach is not unusual even in the next centuries. Tapestry becomes popular as a form of monumental art during the Middle Ages when it is used as decorative architectural element, coating the walls of medieval castles. During the next centuries dominated by decadent styles of baroque, rococo, the tapestry will lose its monumental spirit and architectural quality but at the middle of the XXth century a new approach will sustain the revival of the tapestry as monumental art. Later, in the XXIst century, renowned multimedia artists will approach this medium and will use computer assisted looms in ambitious tapestry projects. This technique will allow them to realize complex and exquisite tapestries, sustaining in this way the revival of the tapestry in the contemporary art world. The paper presents the importance of the architectural side of tapestry and the great achievement that computer assisted loom represents for this form of art. The research activity is willing to inform Romanian textile designers about the possibilities to create tapestries on computer assisted looms. The research was made during the initial stage of a doctoral thesis consisting in a documentary study on monumental aspects of contemporary tapestry.

A Computer-Assisted Instruction in Teaching Abstract Statistics to Public Affairs Undergraduates

Science.gov (United States)

Ozturk, Ali Osman

2012-01-01

This article attempts to demonstrate the applicability of a computer-assisted instruction supported with simulated data in teaching abstract statistical concepts to political science and public affairs students in an introductory research methods course. The software is called the Elaboration Model Computer Exercise (EMCE) in that it takes a great…

Effects of a Computer-Assisted Concept Mapping Learning Strategy on EFL College Students' English Reading Comprehension

Science.gov (United States)

Liu, Pei-Lin; Chen, Chiu-Jung; Chang, Yu-Ju

2010-01-01

The purpose of this research was to investigate the effects of a computer-assisted concept mapping learning strategy on EFL college learners' English reading comprehension. The research questions were: (1) what was the influence of the computer-assisted concept mapping learning strategy on different learners' English reading comprehension? (2) did…

Design of Intelligent Robot as A Tool for Teaching Media Based on Computer Interactive Learning and Computer Assisted Learning to Improve the Skill of University Student

Science.gov (United States)

Zuhrie, M. S.; Basuki, I.; Asto B, I. G. P.; Anifah, L.

2018-01-01

The focus of the research is the teaching module which incorporates manufacturing, planning mechanical designing, controlling system through microprocessor technology and maneuverability of the robot. Computer interactive and computer-assisted learning is strategies that emphasize the use of computers and learning aids (computer assisted learning) in teaching and learning activity. This research applied the 4-D model research and development. The model is suggested by Thiagarajan, et.al (1974). 4-D Model consists of four stages: Define Stage, Design Stage, Develop Stage, and Disseminate Stage. This research was conducted by applying the research design development with an objective to produce a tool of learning in the form of intelligent robot modules and kit based on Computer Interactive Learning and Computer Assisted Learning. From the data of the Indonesia Robot Contest during the period of 2009-2015, it can be seen that the modules that have been developed confirm the fourth stage of the research methods of development; disseminate method. The modules which have been developed for students guide students to produce Intelligent Robot Tool for Teaching Based on Computer Interactive Learning and Computer Assisted Learning. Results of students’ responses also showed a positive feedback to relate to the module of robotics and computer-based interactive learning.

Digital computers in action

CERN Document Server

Booth, A D

1965-01-01

Digital Computers in Action is an introduction to the basics of digital computers as well as their programming and various applications in fields such as mathematics, science, engineering, economics, medicine, and law. Other topics include engineering automation, process control, special purpose games-playing devices, machine translation and mechanized linguistics, and information retrieval. This book consists of 14 chapters and begins by discussing the history of computers, from the idea of performing complex arithmetical calculations to the emergence of a modern view of the structure of a ge

A Multidisciplinary Model for Development of Intelligent Computer-Assisted Instruction.

Science.gov (United States)

Park, Ok-choon; Seidel, Robert J.

1989-01-01

Proposes a schematic multidisciplinary model to help developers of intelligent computer-assisted instruction (ICAI) identify the types of required expertise and integrate them into a system. Highlights include domain types and expertise; knowledge acquisition; task analysis; knowledge representation; student modeling; diagnosis of learning needs;…

The pedagogical effectiveness of ASR-based computer assisted pronunciation training

NARCIS (Netherlands)

Neri, A.

2007-01-01

Computer Assisted Pronunciation Training (CAPT) systems with Automatic Speech Recognition (ASR) technology have become increasingly popular to train pronunciation in the second language (L2). The advantage of these systems is the provision of a self-paced, stress-free type of training with automatic

Effect of Tutorial Mode of Computer-Assisted Instruction on Students ...

African Journals Online (AJOL)

This study investigated the effect of Tutorial Mode of Computer- Assisted Instruction (CAI) on students' academic performance in practical geography in Nigeria, However, the sample population of eighty (80) Senior Secondary School Two geography students that were randomly selected from two privately owned secondary ...

Society of Behavioral Medicine (SBM) position statement: SBM urges Congress to preserve and increase the financing of federally funded nutrition assistance programs and services.

Science.gov (United States)

Behrman, Pamela; Demirci, Jill; Yanez, Betina; Beharie, Nisha; Laroche, Helena

2018-05-03

Deep cuts have been proposed to federally funded nutrition assistance programs, including the Supplemental Nutrition Assistance Program (SNAP); the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC); and federally subsidized school breakfast and lunch programs. Yet, these programs help parents afford healthy meals for their families, pregnant and postpartum mothers access supplemental foods and health services for themselves and their infants and young children, and children obtain the nutrition necessary for optimal school performance. Participation in these programs is linked with reductions in perinatal morbidity and mortality, improved childhood growth trajectories, enhanced school performance, and reductions in food insecurity and poverty. Given these compelling health and economic benefits, the Society of Behavioral Medicine urges Congress to protect and increase funding for federally funded nutrition assistance programs, specifically SNAP, WIC, and school breakfast and lunch programs. Per the recent (2017) recommendations of the School Nutrition Association, Congress should also resist any attempts to "block-grant" subsidized school breakfast and lunch programs, which could reduce access to these programs. It is further recommended that Congress improve the scope of implementation- and outcomes-based assessments of these programs. Finally, we recommend efforts to increase awareness of and participation in SNAP, WIC, and federally funded school meal programs for eligible individuals, children, and families.

Computer assisted orthopaedic and trauma surgery. State of the art and future perspectives

NARCIS (Netherlands)

Schep, N. W. L.; Broeders, I. A. M. J.; van der Werken, Chr

2003-01-01

In recent years computer technologies have become more and more integrated in surgical procedures. The potential advantages of computer assisted surgery (CAS) are: increase of accuracy of surgical interventions, less invasive operations, better planning and simulation and reduction of radiation

Precision of lumbar intervertebral measurements: does a computer-assisted technique improve reliability?

Science.gov (United States)

Pearson, Adam M; Spratt, Kevin F; Genuario, James; McGough, William; Kosman, Katherine; Lurie, Jon; Sengupta, Dilip K

2011-04-01

Comparison of intra- and interobserver reliability of digitized manual and computer-assisted intervertebral motion measurements and classification of "instability." To determine if computer-assisted measurement of lumbar intervertebral motion on flexion-extension radiographs improves reliability compared with digitized manual measurements. Many studies have questioned the reliability of manual intervertebral measurements, although few have compared the reliability of computer-assisted and manual measurements on lumbar flexion-extension radiographs. Intervertebral rotation, anterior-posterior (AP) translation, and change in anterior and posterior disc height were measured with a digitized manual technique by three physicians and by three other observers using computer-assisted quantitative motion analysis (QMA) software. Each observer measured 30 sets of digital flexion-extension radiographs (L1-S1) twice. Shrout-Fleiss intraclass correlation coefficients for intra- and interobserver reliabilities were computed. The stability of each level was also classified (instability defined as >4 mm AP translation or 10° rotation), and the intra- and interobserver reliabilities of the two methods were compared using adjusted percent agreement (APA). Intraobserver reliability intraclass correlation coefficients were substantially higher for the QMA technique THAN the digitized manual technique across all measurements: rotation 0.997 versus 0.870, AP translation 0.959 versus 0.557, change in anterior disc height 0.962 versus 0.770, and change in posterior disc height 0.951 versus 0.283. The same pattern was observed for interobserver reliability (rotation 0.962 vs. 0.693, AP translation 0.862 vs. 0.151, change in anterior disc height 0.862 vs. 0.373, and change in posterior disc height 0.730 vs. 0.300). The QMA technique was also more reliable for the classification of "instability." Intraobserver APAs ranged from 87 to 97% for QMA versus 60% to 73% for digitized manual

Palliative medicine consultation for preparedness planning in patients receiving left ventricular assist devices as destination therapy.

Science.gov (United States)

Swetz, Keith M; Freeman, Monica R; AbouEzzeddine, Omar F; Carter, Kari A; Boilson, Barry A; Ottenberg, Abigale L; Park, Soon J; Mueller, Paul S

2011-06-01

To assess the benefit of proactive palliative medicine consultation for delineation of goals of care and quality-of-life preferences before implantation of left ventricular assist devices as destination therapy (DT). We retrospectively reviewed the cases of patients who received DT between January 15, 2009, and January 1, 2010. Of 19 patients identified, 13 (68%) received proactive palliative medicine consultation. Median time of palliative medicine consultation was 1 day before DT implantation (range, 5 days before to 16 days after). Thirteen patients (68%) completed advance directives. The DT implantation team and families reported that preimplantation discussions and goals of care planning made postoperative care more clear and that adverse events were handled more effectively. Currently, palliative medicine involvement in patients receiving DT is viewed as routine by cardiac care specialists. Proactive palliative medicine consultation for patients being considered for or being treated with DT improves advance care planning and thus contributes to better overall care of these patients. Our experience highlights focused advance care planning, thorough exploration of goals of care, and expert symptom management and end-of-life care when appropriate.

Computer Assisted Drafting (CNC) Drawings. Drafting Module 6. Instructor's Guide.

Science.gov (United States)

Missouri Univ., Columbia. Instructional Materials Lab.

This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. This unit contains information on computer-assisted drafting drawings. The guide contains a cross-reference table of instructional materials and 20 worksheets.…

Computer Assisted Audit Techniques

Directory of Open Access Journals (Sweden)

Eugenia Iancu

2007-01-01

Full Text Available From the modern point of view, audit takes intoaccount especially the information systems representingmainly the examination performed by a professional asregards the manner for developing an activity by means ofcomparing it to the quality criteria specific to this activity.Having as reference point this very general definition ofauditing, it must be emphasized that the best known segmentof auditing is the financial audit that had a parallel evolutionto the accountancy one.The present day phase of developing the financial audithas as main trait the internationalization of the accountantprofessional. World wide there are multinational companiesthat offer services in the financial auditing, taxing andconsultancy domain. The auditors, natural persons and auditcompanies, take part at the works of the national andinternational authorities for setting out norms in theaccountancy and auditing domain.The computer assisted audit techniques can be classified inseveral manners according to the approaches used by theauditor. The most well-known techniques are comprised inthe following categories: testing data techniques, integratedtest, parallel simulation, revising the program logics,programs developed upon request, generalized auditsoftware, utility programs and expert systems.

Effects of Using Simultaneous Prompting and Computer-Assisted Instruction during Small Group Instruction

Science.gov (United States)

Ozen, Arzu; Ergenekon, Yasemin; Ulke-Kurkcuoglu, Burcu

2017-01-01

The current study investigated the relation between simultaneous prompting (SP), computer-assisted instruction (CAI), and the receptive identification of target pictures (presented on laptop computer) for four preschool students with developmental disabilities. The students' acquisition of nontarget information through observational learning also…

Effectiveness of computer-assisted interactive videodisc instruction in teaching rheumatology to physical and occupational therapy students.

Science.gov (United States)

Sanford, M K; Hazelwood, S E; Bridges, A J; Cutts, J H; Mitchell, J A; Reid, J C; Sharp, G

1996-01-01

A computer-assisted interactive videodisc instructional program, HP-RHEUM was designed to teach clinical findings in arthritis to occupational and physical therapy students. Using the Rheumatology Image Library videodisc produced by the National Library of Medicine, HP-RHEUM consists of instructional modules which employ advance organizers, examples/nonexamples, summaries, and immediate feedback. To see if HP-RHEUM would be as effective as traditional classroom instruction, control data were collected in 1991 from 52 OT and PT students. Treatment data were collected from 61 students in 1992 when HP-RHEUM entirely replaced lectures. Identical pre- and post-tests consisted of 70 multiple choice questions, with 24 matched to slides. On the slide questions the HP-RHEUM group had significantly higher scores. Otherwise, there was no significant difference in performance between groups. HP-RHEUM provided an independent learning method and enhanced visual comprehension of rheumatologic disease concepts.

Comparison of computer assisted surgery with conventional technique for treatment of abaxial distal phalanx fractures in horses: an in vitro study.

Science.gov (United States)

Rossol, Melanie; Gygax, Diego; Andritzky-Waas, Juliane; Zheng, Guoyan; Lischer, Christoph J; Zhang, Xuan; Auer, Joerg A

2008-01-01

To (1) evaluate and compare computer-assisted surgery (CAS) with conventional screw insertion (conventional osteosynthesis [COS]) for treatment of equine abaxial distal phalanx fractures; (2) compare planned screw position with actual postoperative position; and (3) determine preferred screw insertion direction. Experimental study. Cadaveric equine limbs (n=32). In 8 specimens each, a 4.5 mm cortex bone screw was inserted in lag fashion in dorsopalmar (plantar) direction using CAS or COS. In 2 other groups of 8, the screws were inserted in opposite direction. Precision of CAS was determined by comparison of planned and actual screw position. Preferred screw direction was also assessed for CAS and COS. In 4 of 6 direct comparisons, screw positioning was significantly better with CAS. Results of precision analysis for screw position were similar to studies published in human medicine. None of evaluated criteria identified a preferred direction for screw insertion. For abaxial fractures of the distal phalanx, superior precision in screw position is achieved with CAS technique compared with COS technique. Abaxial fractures of the distal phalanx lend themselves to computer-assisted implantation of 1 screw in a dorsopalmar (plantar) direction. Because of the complex anatomic relationships, and our results, we discourage use of COS technique for repair of this fracture type.

Manual vs. computer-assisted sperm analysis: can CASA replace manual assessment of human semen in clinical practice?

Science.gov (United States)

Talarczyk-Desole, Joanna; Berger, Anna; Taszarek-Hauke, Grażyna; Hauke, Jan; Pawelczyk, Leszek; Jedrzejczak, Piotr

2017-01-01

The aim of the study was to check the quality of computer-assisted sperm analysis (CASA) system in comparison to the reference manual method as well as standardization of the computer-assisted semen assessment. The study was conducted between January and June 2015 at the Andrology Laboratory of the Division of Infertility and Reproductive Endocrinology, Poznań University of Medical Sciences, Poland. The study group consisted of 230 men who gave sperm samples for the first time in our center as part of an infertility investigation. The samples underwent manual and computer-assisted assessment of concentration, motility and morphology. A total of 184 samples were examined twice: manually, according to the 2010 WHO recommendations, and with CASA, using the program set-tings provided by the manufacturer. Additionally, 46 samples underwent two manual analyses and two computer-assisted analyses. The p-value of p CASA and manually. In the group of patients where all analyses with each method were performed twice on the same sample we found no significant differences between both assessments of the same probe, neither in the samples analyzed manually nor with CASA, although standard deviation was higher in the CASA group. Our results suggest that computer-assisted sperm analysis requires further improvement for a wider application in clinical practice.

Audio computer-assisted self interview compared to traditional interview in an HIV-related behavioral survey in Vietnam.

Science.gov (United States)

Le, Linh Cu; Vu, Lan T H

2012-10-01

Globally, population surveys on HIV/AIDS and other sensitive topics have been using audio computer-assisted self interview for many years. This interview technique, however, is still new to Vietnam and little is known about its application and impact in general population surveys. One plausible hypothesis is that residents of Vietnam interviewed using this technique may provide a higher response rate and be more willing to reveal their true behaviors than if interviewed with traditional methods. This study aims to compare audio computer-assisted self interview with traditional face-to-face personal interview and self-administered interview with regard to rates of refusal and affirmative responses to questions on sensitive topics related to HIV/AIDS. In June 2010, a randomized study was conducted in three cities (Ha Noi, Da Nan and Can Tho), using a sample of 4049 residents aged 15 to 49 years. Respondents were randomly assigned to one of three interviewing methods: audio computer-assisted self interview, personal face-to-face interview, and self-administered paper interview. Instead of providing answers directly to interviewer questions as with traditional methods, audio computer-assisted self-interview respondents read the questions displayed on a laptop screen, while listening to the questions through audio headphones, then entered responses using a laptop keyboard. A MySQL database was used for data management and SPSS statistical package version 18 used for data analysis with bivariate and multivariate statistical techniques. Rates of high risk behaviors and mean values of continuous variables were compared for the three data collection methods. Audio computer-assisted self interview showed advantages over comparison techniques, achieving lower refusal rates and reporting higher prevalence of some sensitive and risk behaviors (perhaps indication of more truthful answers). Premarital sex was reported by 20.4% in the audio computer-assisted self-interview survey

Optimizing Computer Assisted Instruction By Applying Principles of Learning Theory.

Science.gov (United States)

Edwards, Thomas O.

The development of learning theory and its application to computer-assisted instruction (CAI) are described. Among the early theoretical constructs thought to be important are E. L. Thorndike's concept of learning connectisms, Neal Miller's theory of motivation, and B. F. Skinner's theory of operant conditioning. Early devices incorporating those…

Computer-Assisted Instruction: A Case Study of Two Charter Schools

Science.gov (United States)

Keengwe, Jared; Hussein, Farhan

2013-01-01

The purpose of this study was to examine the relationship in achievement gap between English language learners (ELLs) utilizing computer-assisted instruction (CAI) in the classroom, and ELLs relying solely on traditional classroom instruction. The study findings showed that students using CAI to supplement traditional lectures performed better…

Using computer-assisted learning to engage diverse learning styles in understanding business management principles.

Science.gov (United States)

Frost, Mary E; Derby, Dustin C; Haan, Andrea G

2013-01-01

Objective : Changes in small business and insurance present challenges for newly graduated chiropractors. Technology that reaches identified, diverse learning styles may assist the chiropractic student in business classes to meet course outcomes better. Thus, the purpose of our study is to determine if the use of technology-based instructional aids enhance students' mastery of course learning outcomes. Methods : Using convenience sampling, 86 students completed a survey assessing course learning outcomes, learning style, and the helpfulness of lecture and computer-assisted learning related to content mastery. Quantitative analyses occurred. Results : Although respondents reported not finding the computer-assisted learning as helpful as the lecture, significant relationships were found between pre- and post-assisted learning measures of the learning outcomes 1 and 2 for the visual and kinesthetic groups. Surprisingly, however, all learning style groups exhibited significant pre- and post-assisted learning appraisal relationships with learning outcomes 3 and 4. Conclusion : While evidence exists within the current study of a relationship between students' learning of the course content corollary to the use of technologic instructional aids, the exact nature of the relationship remains unclear.

Computer Assisted Language Learning (CALL): Using Internet for Effective Language Learning

NARCIS (Netherlands)

Kremenska, Anelly

2006-01-01

Please, cite this publication as: Kremenska, A. (2006). Computer Assisted Language Learning (CALL): Using Internet for Effective Language Learning. Proceedings of International Workshop in Learning Networks for Lifelong Competence Development, TENCompetence Conference. March 30th-31st, Sofia,

The economics of medicines optimization: policy developments, remaining challenges and research priorities

Science.gov (United States)

Faria, Rita; Barbieri, Marco; Light, Kate; Elliott, Rachel A.; Sculpher, Mark

2014-01-01

Background This review scopes the evidence on the effectiveness and cost-effectiveness of interventions to improve suboptimal use of medicines in order to determine the evidence gaps and help inform research priorities. Sources of data Systematic searches of the National Health Service (NHS) Economic Evaluation Database, the Cochrane Database of Systematic Reviews and the Database of Abstracts of Reviews of Effects. Areas of agreement The majority of the studies evaluated interventions to improve adherence, inappropriate prescribing and prescribing errors. Areas of controversy Interventions tend to be specific to a particular stage of the pathway and/or to a particular disease and have mostly been evaluated for their effect on intermediate or process outcomes. Growing points Medicines optimization offers an opportunity to improve health outcomes and efficiency of healthcare. Areas timely for developing research The available evidence is insufficient to assess the effectiveness and cost-effectiveness of interventions to address suboptimal medicine use in the UK NHS. Decision modelling, evidence synthesis and elicitation have the potential to address the evidence gaps and help prioritize research. PMID:25190760

Computer-assisted detection of epileptiform focuses on SPECT images

Science.gov (United States)

Grzegorczyk, Dawid; Dunin-Wąsowicz, Dorota; Mulawka, Jan J.

2010-09-01

Epilepsy is a common nervous system disease often related to consciousness disturbances and muscular spasm which affects about 1% of the human population. Despite major technological advances done in medicine in the last years there was no sufficient progress towards overcoming it. Application of advanced statistical methods and computer image analysis offers the hope for accurate detection and later removal of an epileptiform focuses which are the cause of some types of epilepsy. The aim of this work was to create a computer system that would help to find and diagnose disorders of blood circulation in the brain This may be helpful for the diagnosis of the epileptic seizures onset in the brain.

Computer assisted tutoring in radiology

International Nuclear Information System (INIS)

Jeffery, N.

1997-02-01

The computer-based tutoring of visual concepts such as radiological images is a largely unexplored area. A review of the literature highlights limited use of computers as a means of radiological education, with the majority of systems being little more than hypermedia prototypes, on-line teaching files, and passive CD-Roms. Very few of the systems discussed in the research literature draw on the work from cognitive science and educational psychology for tutoring visual concepts. This thesis details and evaluates a method for indexing and retrieving images from large image databases via a cognitively informed graphical representation of visual concepts. This representation is derived using Multiple Correspondence Analysis from a statistical analysis of features present in the images. It is intended that this representation be used to assist in the computer based teaching of any discipline that requires the tutoring of visual concepts. The domain used as a test bed for this research is Magnetic Resonance Imaging in neuroradiology. Tutoring the interpretation of MR scans of the head represents a real practical problem due to the inherent complexity of the brain and variations in tissue contrast within image sequence and disease/pathology. The literature of concept categorisation and representation is critically reviewed to inform the design of a graphical representation of a concept (a pathology in the application domain). A specification for the design of an explicit representation of visual concepts is drawn from this literature review, together with methods of tutoring based around this model. A methodology for producing this representation is described, and implemented in the development of an overview plot for the concept of a disease of the brain, with associated statistical measures derived and operationalised for typicality and similarity of cases within a disease. These measures are precursors to the development of computer based tutoring strategies for image

Computer assisted tutoring in radiology

Energy Technology Data Exchange (ETDEWEB)

Jeffery, N

1997-02-01

The computer-based tutoring of visual concepts such as radiological images is a largely unexplored area. A review of the literature highlights limited use of computers as a means of radiological education, with the majority of systems being little more than hypermedia prototypes, on-line teaching files, and passive CD-Roms. Very few of the systems discussed in the research literature draw on the work from cognitive science and educational psychology for tutoring visual concepts. This thesis details and evaluates a method for indexing and retrieving images from large image databases via a cognitively informed graphical representation of visual concepts. This representation is derived using Multiple Correspondence Analysis from a statistical analysis of features present in the images. It is intended that this representation be used to assist in the computer based teaching of any discipline that requires the tutoring of visual concepts. The domain used as a test bed for this research is Magnetic Resonance Imaging in neuroradiology. Tutoring the interpretation of MR scans of the head represents a real practical problem due to the inherent complexity of the brain and variations in tissue contrast within image sequence and disease/pathology. The literature of concept categorisation and representation is critically reviewed to inform the design of a graphical representation of a concept (a pathology in the application domain). A specification for the design of an explicit representation of visual concepts is drawn from this literature review, together with methods of tutoring based around this model. A methodology for producing this representation is described, and implemented in the development of an overview plot for the concept of a disease of the brain, with associated statistical measures derived and operationalised for typicality and similarity of cases within a disease. These measures are precursors to the development of computer based tutoring strategies for image

A distance assisted training programme for nuclear medicine technologists methodology and international experience

International Nuclear Information System (INIS)

Patterson, Heather

2002-01-01

The Distance Assisted Training Programme for Nuclear Medicine Technologists (DAT) has been developed and coordinated through West mead Hospital, Sydney and directed under the auspices of the International Atomic Energy Agency (IAEA). The objective of the program is to provide primarily developing countries with teaching resources for development of technologist education and a framework for the delivery of training courses that can be adapted to best suit local need. Careful planning and development of learning materials, translation to several languages and program implementation have resulted in >400 technologists in 24 countries currently participating in the course of study within Asia, Latin America and Africa. The development and implementation of suitable assessment techniques has provided a structure for technologists to attain a common basic standard in competencies across the regions. Graduates have better opportunities to further their education as well as contribute to improved use of advancing technologies in nuclear medicine (Au)

Community effort endorsing multiscale modelling, multiscale data science and multiscale computing for systems medicine.

Science.gov (United States)

Zanin, Massimiliano; Chorbev, Ivan; Stres, Blaz; Stalidzans, Egils; Vera, Julio; Tieri, Paolo; Castiglione, Filippo; Groen, Derek; Zheng, Huiru; Baumbach, Jan; Schmid, Johannes A; Basilio, José; Klimek, Peter; Debeljak, Nataša; Rozman, Damjana; Schmidt, Harald H H W

2017-12-05

Systems medicine holds many promises, but has so far provided only a limited number of proofs of principle. To address this road block, possible barriers and challenges of translating systems medicine into clinical practice need to be identified and addressed. The members of the European Cooperation in Science and Technology (COST) Action CA15120 Open Multiscale Systems Medicine (OpenMultiMed) wish to engage the scientific community of systems medicine and multiscale modelling, data science and computing, to provide their feedback in a structured manner. This will result in follow-up white papers and open access resources to accelerate the clinical translation of systems medicine. © The Author 2017. Published by Oxford University Press.

Application of Computer-Assisted Learning Methods in the Teaching of Chemical Spectroscopy.

Science.gov (United States)

Ayscough, P. B.; And Others

1979-01-01

Discusses the application of computer-assisted learning methods to the interpretation of infrared, nuclear magnetic resonance, and mass spectra; and outlines extensions into the area of integrated spectroscopy. (Author/CMV)

Faculty Attitudes towards Computer Assisted Instruction at the University of Gaziantep

Directory of Open Access Journals (Sweden)

Filiz Yalçın TILFARLIOĞLU

2006-04-01

Full Text Available This study aims at revealing faculty attitudes towards computer assistedinstruction at University of Gaziantep, Turkey in a multifaceted way. Additionally, ittries to determine underlying factors that shape these attitudes. After a pilot study, thequestionnaire was applied to a sample population of 145 faculty that were chosenrandomly. The results revealed that faculty attitudes towards computer assistedinsruction are positive. Age, sex, teaching experience, level of proficiency in Englishand computer usage skills have no or little effects over these attitudes.According to theresults of the study, faculty who have prior knowledge on computers expose ratherpositive attitudes towards computers in education.Another important outcome of thestudy is the existence of a gender gap in terms of computer assisted instruction.Althoughthere seems to be no difference between male and female faculty concerning theirbackground education regarding computers, male faculty feel confident about thematter, whereas female faculty feel uncomfortable about using computers in theirlessons.

Computer-Assisted Technique for Surgical Tooth Extraction

Directory of Open Access Journals (Sweden)

Hosamuddin Hamza

2016-01-01

Full Text Available Introduction. Surgical tooth extraction is a common procedure in dentistry. However, numerous extraction cases show a high level of difficulty in practice. This difficulty is usually related to inadequate visualization, improper instrumentation, or other factors related to the targeted tooth (e.g., ankyloses or presence of bony undercut. Methods. In this work, the author presents a new technique for surgical tooth extraction based on 3D imaging, computer planning, and a new concept of computer-assisted manufacturing. Results. The outcome of this work is a surgical guide made by 3D printing of plastics and CNC of metals (hybrid outcome. In addition, the conventional surgical cutting tools (surgical burs are modified with a number of stoppers adjusted to avoid any excessive drilling that could harm bone or other vital structures. Conclusion. The present outcome could provide a minimally invasive technique to overcome the routine complications facing dental surgeons in surgical extraction procedures.

LITERACY AND FOREIGN LANGUAGE TEACHING AS KEY FACTORS FOR SOCIO-ECONOMIC ADAPTATION OF STUDENTS’ POPULATION - CHARACTERISTICS OF LITERACY AMONG DIFFERENT DEPARTMENTS AT THE FACULTY OF MEDICINE

Directory of Open Access Journals (Sweden)

Boris Djindjic

2007-01-01

Full Text Available Language and communication are at the heart of the human experience. Reading and writing are the most powerful modes of formal learning and they are fundamental to intellectual inquiry and creativity in all disciplines. Literacy comprises not only reading and writing skills but also understanding of human communication needs and the way of social functioning. The aim of this study was to determine the importance of foreign language learning for students’ socio-economic adaptation. The study investigated the relationship between students’ foreign language literacy and their achievements in medical studies.The investigation is a prospective study carried out among students of the Faculty of Medicine in Nis during June, 2006. The investigation included 312 students of all departments (medicine, dentistry, pharmacy and nursing and was conducted by means of a questionnaire. We determined students’ socio-economic adaptation, literacy in the mother tongue and foreign language (reading, writing, speaking and listening, and the ability of using modern technological achievements (computer work, Internet and SMS correspondence.Writing and listening skills of the mother tongue are significantly lower at the Department of Nursing. There is no difference in using post-correspondence among groups, whereby dentistry students most often used modern means of communication. The percentage of students satisfied with their social status is the highest among students of medicine and pharmacy and the lowest among students at the Department of Nursing. The percentage of students satisfied with the economic status is the highest among students of medicine, slightly lower among students of dentistry and pharmacy, and the lowest among nurses. The average grade of achievements at the Faculty is the highest in the group of nurses, slightly lower in the group of pharmacy, and the lowest in the group of medicine and dentistry. Generally, the grades for foreign language

Computer-Assisted Instruction to Teach DOS Commands: A Pilot Study.

Science.gov (United States)

McWeeney, Mark G.

1992-01-01

Describes a computer-assisted instruction (CAI) program used to teach DOS commands. Pretest and posttest results for 65 graduate students using the program are reported, and it is concluded that the CAI program significantly aided the students. Sample screen displays for the program and several questions from the pre/posttest are included. (nine…

An Intelligent Computer Assisted Language Learning System for Arabic Learners

Science.gov (United States)

Shaalan, Khaled F.

2005-01-01

This paper describes the development of an intelligent computer-assisted language learning (ICALL) system for learning Arabic. This system could be used for learning Arabic by students at primary schools or by learners of Arabic as a second or foreign language. It explores the use of Natural Language Processing (NLP) techniques for learning…

Towards ubiquitous access of computer-assisted surgery systems.

Science.gov (United States)

Liu, Hui; Lufei, Hanping; Shi, Weishong; Chaudhary, Vipin

2006-01-01

Traditional stand-alone computer-assisted surgery (CAS) systems impede the ubiquitous and simultaneous access by multiple users. With advances in computing and networking technologies, ubiquitous access to CAS systems becomes possible and promising. Based on our preliminary work, CASMIL, a stand-alone CAS server developed at Wayne State University, we propose a novel mobile CAS system, UbiCAS, which allows surgeons to retrieve, review and interpret multimodal medical images, and to perform some critical neurosurgical procedures on heterogeneous devices from anywhere at anytime. Furthermore, various optimization techniques, including caching, prefetching, pseudo-streaming-model, and compression, are used to guarantee the QoS of the UbiCAS system. UbiCAS enables doctors at remote locations to actively participate remote surgeries, share patient information in real time before, during, and after the surgery.

Augmented Reality Based Navigation for Computer Assisted Hip Resurfacing: A Proof of Concept Study.

Science.gov (United States)

Liu, He; Auvinet, Edouard; Giles, Joshua; Rodriguez Y Baena, Ferdinando

2018-05-23

Implantation accuracy has a great impact on the outcomes of hip resurfacing such as recovery of hip function. Computer assisted orthopedic surgery has demonstrated clear advantages for the patients, with improved placement accuracy and fewer outliers, but the intrusiveness, cost, and added complexity have limited its widespread adoption. To provide seamless computer assistance with improved immersion and a more natural surgical workflow, we propose an augmented-reality (AR) based navigation system for hip resurfacing. The operative femur is registered by processing depth information from the surgical site with a commercial depth camera. By coupling depth data with robotic assistance, obstacles that may obstruct the femur can be tracked and avoided automatically to reduce the chance of disruption to the surgical workflow. Using the registration result and the pre-operative plan, intra-operative surgical guidance is provided through a commercial AR headset so that the user can perform the operation without additional physical guides. To assess the accuracy of the navigation system, experiments of guide hole drilling were performed on femur phantoms. The position and orientation of the drilled holes were compared with the pre-operative plan, and the mean errors were found to be approximately 2 mm and 2°, results which are in line with commercial computer assisted orthopedic systems today.

Rapid and sensitive determination of phytosterols in functional foods and medicinal herbs by using UHPLC-MS/MS with microwave-assisted derivatization combined with dual ultrasound-assisted dispersive liquid-liquid microextraction.

Science.gov (United States)

Sun, Jing; Zhao, Xian-En; Dang, Jun; Sun, Xiaoyan; Zheng, Longfang; You, Jinmao; Wang, Xiao

2017-02-01

In this work, a hyphenated technique of dual ultrasound-assisted dispersive liquid-liquid microextraction combined with microwave-assisted derivatization followed by ultra high performance liquid chromatography tandem mass spectrometry has been developed for the determination of phytosterols in functional foods and medicinal herbs. Multiple reaction monitoring mode was used for the tandem mass spectrometry detection. A mass spectrometry sensitive reagent, 4'-carboxy-substituted rosamine, has been used as the derivatization reagent for five phytosterols, and internal standard diosgenin was used for the first time. Parameters for the dual microextraction, microwave-assisted derivatization, and ultra high performance liquid chromatography tandem mass spectrometry were all optimized in detail. Satisfactory linearity, recovery, repeatability, accuracy and precision, absence of matrix effect, extremely low limits of detection (0.005-0.015 ng/mL) and limits of quantification (0.030-0.10 ng/mL) were achieved. The proposed method was compared with previously reported methods. It showed better sensitivity, selectivity, and accuracy. The matrix effect was also significantly reduced. The proposed method was successfully applied to the determination of five phytosterols in vegetable oil (sunflower oil, olive oil, corn oil, peanut oil), milk and orange juice (soymilk, peanut milk, orange juice), and medicinal herbs (Ginseng, Ganoderma lucidum, Cordyceps, Polygonum multiflorum) for the quality control of functional foods and medicinal herbs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Computer-Assisted Visual Search/Decision Aids as a Training Tool for Mammography

National Research Council Canada - National Science Library

Nodine, Calvin

1999-01-01

The primary goal of the project is to develop a computer-assisted visual search (CAVS) mammography training tool that will improve the perceptual and cognitive skills of trainees leading to mammographic expertise...

Computer-Assisted Visual Search/Decision Aids as a Training Tool for Mammography

National Research Council Canada - National Science Library

Nodine, Calvin

1998-01-01

The primary goal of the project is to develop a computer-assisted visual search (CAVS) mammography training tool that will improve the perceptual and cognitive skills of trainees leading to mammographic expertise...

Computer-Assisted Visual Search/Decision Aids as a Training Tool for Mammography

National Research Council Canada - National Science Library

Nodine, Calvin

2000-01-01

The primary goal of the project is to develop a computer-assisted visual search (CAVS) mammography training tool that will improve the perceptual and cognitive skills of trainees leading to mammographic expertise...

Effects of Computer-Assisted Instruction with Conceptual Change Texts on Removing the Misconceptions of Radioactivity

Directory of Open Access Journals (Sweden)

Ahmet YUMUŞAK

2016-12-01

Full Text Available Training young scientists, enabling conceptual understanding in science education is quite important. Misconception is one of the important indications for whether the concepts are understood or not. The most important educational tools to remove misconceptions are conceptual change texts. In addition, one of the important methods to remove misconceptions is computer-assisted instruction. The goal of this study is to research the effects of the use of computer-assisted instruction (CAI, conceptual change texts (CCT, computer-assisted instruction with conceptual change texts (CAI+CCT, and use of traditional teaching method (TTM on removing the misconceptions of science teacher candidates on the subject of radioactivity. Research sample was made of totally 92 students studying at four different groups of senior students in Celal Bayar University, Faculty of Education, Department of Science Education in 2011-2012 academic year. A different teaching method was used in each group. Experimental groups were randomly determined; in the first experimental group, computer-assisted instruction was used (23 students; in the second experimental group, conceptual change texts were used (23 students; in the third experimental group, computer-assisted instruction with conceptual change texts were used (23 students; and the fourth group, on which traditional education method was used, was called control group (23 students. Two-tier misconception diagnostic instrument, which was developed by the researcher, was used as data collection tool of the research. “Nonequivalent Control Groups Experimental Design” was used in this research in order to determine the efficiency of different teaching methods. Obtained data were analyzed by using SPSS 21.0. As a result of the research, it was determined that methods used on experimental groups were more successful than traditional teaching method practiced on control group in terms of removing misconceptions on

Positive ventriculography and computer assisted tomography of the skull in the evaluation of megalocephaly in newborns and infants

International Nuclear Information System (INIS)

Kellermann, K.; Heuser, L.; Bliesener, J.A.

1979-01-01

To clarify indications and limits of computer assisted tomography and positive ventriculography the results of both methods were compared with each other retrospectively in 55 macrocephalic newborns and infants. It could be shown that positive ventriculography, even if combined with coronal views, was superseded by computer assisted tomography to only a certain extent. To complete the appropriate diagnosis preoperatively positive ventriculography was necessary most often in patients with paranatal disturbances who had undergone intensive care treatment. The non-invasive method of computer assisted tomography often yielded sufficient information on localisation, size, and nature of the underlying pathologic process. Both methods turned out to be complementary when topographical and functional interrelations of cranial cysts were to be analysed, or when anatomical details had to be demonstrated, especially structures of the midline and of the posterior fossa, which could not be visualized by computer assisted tomography alone. (orig.) [de

Computer assisted SCFE osteotomy planning

International Nuclear Information System (INIS)

Drapikowski, Pawel; Tyrakowski, Marcin; Czubak, Jaroslaw; Czwojdzinski, Adam

2008-01-01

Slipped capital femoral epiphysis (SCFE) is a common pediatric orthopedic disorder that requires surgical correction. Preoperative planning of a proximal femoral osteotomy is essential in cases of SCFE. This planning is usually done using 2D radiographs, but 3D data can be acquired with CT and analyzed with 3D visualization software. SCFEanalyzer is a computer program developed for preoperative planning of proximal femoral osteotomy to correct SCFE. Computed tomography scans were performed on human bone specimens: one pelvis and two femoral bones (right and left) and volume data of a patient. The CT data were used to test the abilities of the SCFEanalyzer software, which utilizes 3D virtual models of anatomic structures constructed from CT image data. Separation of anatomical bone structures is done by means of ''cutting'' 3D surface model of the pelvis. The software enables qualitative and quantitative spatial analysis of chosen parameters analogous to those done on the basis of plain radiographs. SCFEanalyzer makes it possible to evaluate the function of the hip joint by calculating the range of motion depending on the shape of bone structures based on oriented bounding box object representation. Pelvic and hip CT scans from a patient with SCFE were subjected to femoral geometry analysis and hip joint function assessment. These were done to plan and simulate osteotomy of the proximal femur. Analogous qualitative and quantitative evaluation after performing the virtual surgery were evaluated to determine the potential treatment effects. The use of computer assistance in preoperative planning enable us to increase objectivity and repeatability, and to compare the results of different types of osteotomy on the proximal femur, and thus to choose the optimal operation in each individual case. (orig.)

Computer assisted SCFE osteotomy planning

Energy Technology Data Exchange (ETDEWEB)

Drapikowski, Pawel [Poznan University of Technology, Institute of Control and Information Engineering, Poznan (Poland); Tyrakowski, Marcin; Czubak, Jaroslaw; Czwojdzinski, Adam [Postgraduate Medical Education Center, Department of Orthopaedics, Warsaw (Poland)

2008-11-15

Slipped capital femoral epiphysis (SCFE) is a common pediatric orthopedic disorder that requires surgical correction. Preoperative planning of a proximal femoral osteotomy is essential in cases of SCFE. This planning is usually done using 2D radiographs, but 3D data can be acquired with CT and analyzed with 3D visualization software. SCFEanalyzer is a computer program developed for preoperative planning of proximal femoral osteotomy to correct SCFE. Computed tomography scans were performed on human bone specimens: one pelvis and two femoral bones (right and left) and volume data of a patient. The CT data were used to test the abilities of the SCFEanalyzer software, which utilizes 3D virtual models of anatomic structures constructed from CT image data. Separation of anatomical bone structures is done by means of ''cutting'' 3D surface model of the pelvis. The software enables qualitative and quantitative spatial analysis of chosen parameters analogous to those done on the basis of plain radiographs. SCFEanalyzer makes it possible to evaluate the function of the hip joint by calculating the range of motion depending on the shape of bone structures based on oriented bounding box object representation. Pelvic and hip CT scans from a patient with SCFE were subjected to femoral geometry analysis and hip joint function assessment. These were done to plan and simulate osteotomy of the proximal femur. Analogous qualitative and quantitative evaluation after performing the virtual surgery were evaluated to determine the potential treatment effects. The use of computer assistance in preoperative planning enable us to increase objectivity and repeatability, and to compare the results of different types of osteotomy on the proximal femur, and thus to choose the optimal operation in each individual case. (orig.)

Scientific information repository assisting reflectance spectrometry in legal medicine.

Science.gov (United States)

Belenki, Liudmila; Sterzik, Vera; Bohnert, Michael; Zimmermann, Klaus; Liehr, Andreas W

2012-06-01

Reflectance spectrometry is a fast and reliable method for the characterization of human skin if the spectra are analyzed with respect to a physical model describing the optical properties of human skin. For a field study performed at the Institute of Legal Medicine and the Freiburg Materials Research Center of the University of Freiburg, a scientific information repository has been developed, which is a variant of an electronic laboratory notebook and assists in the acquisition, management, and high-throughput analysis of reflectance spectra in heterogeneous research environments. At the core of the repository is a database management system hosting the master data. It is filled with primary data via a graphical user interface (GUI) programmed in Java, which also enables the user to browse the database and access the results of data analysis. The latter is carried out via Matlab, Python, and C programs, which retrieve the primary data from the scientific information repository, perform the analysis, and store the results in the database for further usage.

Computer-Assisted Career Guidance Systems: A Part of NCDA History

Science.gov (United States)

Harris-Bowlsbey, JoAnn

2013-01-01

The first computer-assisted career planning systems were developed in the late 1960s and were based soundly on the best of career development and decision-making theory. Over the years, this tradition has continued as the technology that delivers these systems' content has improved dramatically and as they have been universally accepted as…

Medical image computing and computer-assisted intervention - MICCAI 2006. Pt. 1. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Larsen, R. [Technical Univ. of Denmark, Lyngby (Denmark). Informatics and Mathematical Modelling; Nielsen, M. [IT Univ. of Copenhagen (Denmark); Sporring, J. (eds.) [Copenhagen Univ. (Denmark). Dept. of Computer Science

2006-07-01

The two-volume set LNCS 4190 and LNCS 4191 constitute the refereed proceedings of the 9th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2006, held in Copenhagen, Denmark in October 2006. The program committee carefully selected 39 revised full papers and 193 revised poster papers from 578 submissions for presentation in two volumes, based on a rigorous peer reviews. The first volume includes 114 contributions related to bone shape analysis, robotics and tracking, segmentation, analysis of diffusion tensor MRI, shape analysis and morphometry, simulation and interaction, robotics and intervention, cardio-vascular applications, image analysis in oncology, brain atlases and segmentation, cardiac motion analysis, clinical applications, and registration. The second volume collects 118 papers related to segmentation, validation and quantitative image analysis, brain image processing, motion in image formation, image guided clinical applications, registration, as well as brain analysis and registration. (orig.)

Medical image computing and computer-assisted intervention - MICCAI 2006. Pt. 2. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Larsen, R. [Technical Univ. of Denmark, Lyngby (Denmark). Informatics and Mathematical Modelling; Nielsen, M. [IT Univ. of Copenhagen (Denmark); Sporring, J. (eds.) [Copenhagen Univ. (Denmark). Dept. of Computer Science

2006-07-01

The two-volume set LNCS 4190 and LNCS 4191 constitute the refereed proceedings of the 9th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2006, held in Copenhagen, Denmark in October 2006. The program committee carefully selected 39 revised full papers and 193 revised poster papers from 578 submissions for presentation in two volumes, based on a rigorous peer reviews. The first volume includes 114 contributions related to bone shape analysis, robotics and tracking, segmentation, analysis of diffusion tensor MRI, shape analysis and morphometry, simulation and interaction, robotics and intervention, cardio-vascular applications, image analysis in oncology, brain atlases and segmentation, cardiac motion analysis, clinical applications, and registration. The second volume collects 118 papers related to segmentation, validation and quantitative image analysis, brain image processing, motion in image formation, image guided clinical applications, registration, as well as brain analysis and registration. (orig.)

Medical image computing and computer-assisted intervention - MICCAI 2006. Pt. 2. Proceedings

International Nuclear Information System (INIS)

Larsen, R.; Sporring, J.

2006-01-01

The two-volume set LNCS 4190 and LNCS 4191 constitute the refereed proceedings of the 9th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2006, held in Copenhagen, Denmark in October 2006. The program committee carefully selected 39 revised full papers and 193 revised poster papers from 578 submissions for presentation in two volumes, based on a rigorous peer reviews. The first volume includes 114 contributions related to bone shape analysis, robotics and tracking, segmentation, analysis of diffusion tensor MRI, shape analysis and morphometry, simulation and interaction, robotics and intervention, cardio-vascular applications, image analysis in oncology, brain atlases and segmentation, cardiac motion analysis, clinical applications, and registration. The second volume collects 118 papers related to segmentation, validation and quantitative image analysis, brain image processing, motion in image formation, image guided clinical applications, registration, as well as brain analysis and registration. (orig.)

Medical image computing and computer-assisted intervention - MICCAI 2006. Pt. 1. Proceedings

International Nuclear Information System (INIS)

Larsen, R.; Sporring, J.

2006-01-01

The two-volume set LNCS 4190 and LNCS 4191 constitute the refereed proceedings of the 9th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2006, held in Copenhagen, Denmark in October 2006. The program committee carefully selected 39 revised full papers and 193 revised poster papers from 578 submissions for presentation in two volumes, based on a rigorous peer reviews. The first volume includes 114 contributions related to bone shape analysis, robotics and tracking, segmentation, analysis of diffusion tensor MRI, shape analysis and morphometry, simulation and interaction, robotics and intervention, cardio-vascular applications, image analysis in oncology, brain atlases and segmentation, cardiac motion analysis, clinical applications, and registration. The second volume collects 118 papers related to segmentation, validation and quantitative image analysis, brain image processing, motion in image formation, image guided clinical applications, registration, as well as brain analysis and registration. (orig.)

Computer-Aided Design/Computer-Assisted Manufacture Monolithic Restorations for Severely Worn Dentition: A Case History Report.

Science.gov (United States)

Abou-Ayash, Samir; Boldt, Johannes; Vuck, Alexander

Full-arch rehabilitation of patients with severe tooth wear due to parafunctional behavior is a challenge for dentists and dental technicians, especially when a highly esthetic outcome is desired. A variety of different treatment options and prosthetic materials are available for such a clinical undertaking. The ongoing progress of computer-aided design/computer-assisted manufacture technologies in combination with all-ceramic materials provides a predictable workflow for these complex cases. This case history report describes a comprehensive, step-by-step treatment protocol leading to an optimally predictable treatment outcome for an esthetically compromised patient.

Computational Medicine

DEFF Research Database (Denmark)

Nygaard, Jens Vinge

2017-01-01

The Health Technology Program at Aarhus University applies computational biology to investigate the heterogeneity of tumours......The Health Technology Program at Aarhus University applies computational biology to investigate the heterogeneity of tumours...

CT imaging, then and now: a 30-year review of the economics of computed tomography.

Science.gov (United States)

Stockburger, Wayne T

2004-01-01

The first computed tomography (CT) scanner in the US was installed in June 1973 at the Mayo Clinic in Rochester, MN. By the end of 1974, 44 similar systems had been installed at medical facilities around the country. Less than 4 years after the introduction of CT imaging in the US, at least 400 CT systems had been installed. The practice of pneumoencephalography was eliminated. The use of nuclear medicine brain scans significantly diminished. At the time, CT imaging was limited to head studies, but with the introduction of contrast agents and full body CT systems the changes in the practice of medicine became even more significant. CT imaging was hailed by the US medical community as the greatest advance in radiology since the discovery of x-rays. But the rapid spread of CT systems, their frequency of use, and the associated increase in healthcare costs combined to draw the attention of decision-makers within the federal and state governments, specifically to establish policies regarding the acquisition and use of diagnostic technologies. Initially, CT imaging was limited to neurological applications, but in the 30 years since its inception, capabilities and applications have been expanded as a result of the advancements in technology and software development. While neurological disorders are still a common reason for CT imaging, many other medical disciplines (oncology, emergency medicine, orthopedics, etc.) have found CT imaging to be the definitive tool for diagnostic information. As such, the clinical demand for CT imaging has steadily increased. Economically, the development of CT imaging has been one of success, even in the face of governmental action to restrict its acquisition and utilization by healthcare facilities. CTimaging has increased the cost of healthcare, but in turn has added unquantifiable value to the practice of medicine in the US.

An industrial application of computer assisted tomography

International Nuclear Information System (INIS)

Tonner, P.D.; Tosello, G.

1984-10-01

Computer assisted tomography (CAT) scanning is a nondestructive testing technique used to obtain quantitatively accurate mappings of the distribution of linear attenuation coefficients inside an object. To demonstrate the potential of the technique for accurately locating defects in three dimensions a sectioned 5 cm gate valve, with a shrink cavity made visible by the sectioning, was tomographically imaged using a Co-60 source. The tomographic images revealed a larger cavity below the sectioned surface. The position of this cavity was located with an in-plane and axial precision of approximately +- 1 mm. The volume of the cavity was estimated to be approximately 40 mm 3

The costs and consequences of assisted reproductive technology: an economic perspective.

Science.gov (United States)

Connolly, Mark P; Hoorens, Stijn; Chambers, Georgina M

2010-01-01

Despite the growing use of assisted reproductive technologies (ART) worldwide, there is only a limited understanding of the economics of ART to inform policy about effective, safe and equitable financing of ART treatment. A review was undertaken of key studies regarding the costs and consequences of ART treatment, specifically examining the direct and indirect costs of treatment, economic drivers of utilization and clinical practice and broader economic consequences of ART-conceived children. The direct costs of ART treatment vary substantially between countries, with the USA standing out as the most expensive. The direct costs generally reflect the costliness of the underlying healthcare system. If unsubsidized, direct costs represent a significant economic burden to patients. The level of affordability of ART treatment is an important driver of utilization, treatment choices, embryo transfer practices and ultimately multiple birth rates. The costs associated with caring for multiple-birth ART infants and their mothers are substantial, reflecting the underlying morbidity associated with such pregnancies. Investment analysis of ART treatment and ART-conceived children indicates that appropriate funding of ART services appears to represent sound fiscal policy. The complex interaction between the cost of ART treatment and how treatments are subsidized in different healthcare settings and for different patient groups has far-reaching consequences for ART utilization, clinical practice and infant outcomes. A greater understanding of the economics of ART is needed to inform policy decisions and to ensure the best possible outcomes from ART treatment.

Computed tomography (CT), nuclear medicine (NM), and ultrasound (US) in oncology patients

International Nuclear Information System (INIS)

McNeil, B.J.

1982-01-01

This review will summarize the effectiveness of computed tomography, ultrasound, and nuclear medicine imaging procedures in several different disease processes. The results indicate: (1) CT is clearly better than ultrasound for diseases of the adrenal gland and pancreas; (2) for patients with gynecologic malignancies, CT and ultrasound are approximately equivalent in their ability to define treatment options effectively; (3) in the liver, the differences among the three modalities are less marked and are disease specific. For example, for patients with colon cancer the increased effectiveness of CT relative to ultrasound or nuclear medicine is small. For patients with breast cancer, the difference is greater; (4) for patients suspected to have a focal source of sepsis, CT is slightly better than ultrasound or nuclear medicine. In these patients, however, when nuclear medicine images are obtained on a rectilinear scanner, the results are significantly worse compared to nuclear medicine images on a LFOV gamma camera or to ultrasound. As a result of the above studies and concommitant statistical analyses, several conclusions can be drawn about optimum experimental design and statistical approaches for comparing imaging modalities

Helping Children Learn Vocabulary during Computer-Assisted Oral Reading

Directory of Open Access Journals (Sweden)

Gregory Aist

2002-04-01

Full Text Available This paper addresses an indispensable skill using a unique method to teach a critical component: helping children learn to read by using computer-assisted oral reading to help children learn vocabulary. We build on Project LISTEN’s Reading Tutor, a computer program that adapts automatic speech recognition to listen to children read aloud, and helps them learn to read (http://www.cs.cmu.edu/~listen. To learn a word from reading with the Reading Tutor, students must encounter the word and learn the meaning of the word in context. We modified the Reading Tutor first to help students encounter new words and then to help them learn the meanings of new words. We then compared the Reading Tutor to classroom instruction and to human-assisted oral reading as part of a yearlong study with 144 second and third graders. The result: Second graders did about the same on word comprehension in all three conditions. However, third graders who read with the 1999 Reading Tutor, modified as described in this paper, performed statistically significantly better than other third graders in a classroom control on word comprehension gains – and even comparably with other third graders who read one-on-one with human tutors.

Computer-assisted self interviewing in sexual health clinics.

Science.gov (United States)

Fairley, Christopher K; Sze, Jun Kit; Vodstrcil, Lenka A; Chen, Marcus Y

2010-11-01

This review describes the published information on what constitutes the elements of a core sexual history and the use of computer-assisted self interviewing (CASI) within sexually transmitted disease clinics. We searched OVID Medline from 1990 to February 2010 using the terms "computer assisted interviewing" and "sex," and to identify published articles on a core sexual history, we used the term "core sexual history." Since 1990, 3 published articles used a combination of expert consensus, formal clinician surveys, and the Delphi technique to decide on what questions form a core sexual health history. Sexual health histories from 4 countries mostly ask about the sex of the partners, the number of partners (although the time period varies), the types of sex (oral, anal, and vaginal) and condom use, pregnancy intent, and contraceptive methods. Five published studies in the United States, Australia, and the United Kingdom compared CASI with in person interviews in sexually transmitted disease clinics. In general, CASI identified higher risk behavior more commonly than clinician interviews, although there were substantial differences between studies. CASI was found to be highly acceptable and individuals felt it allowed more honest reporting. Currently, there are insufficient data to determine whether CASI results in differences in sexually transmitted infection testing, diagnosis, or treatment or if CASI improves the quality of sexual health care or its efficiency. The potential public health advantages of the widespread use of CASI are discussed.

Nuclear Medicine in a developing country

International Nuclear Information System (INIS)

Wenzel, K.S. von; Rubow, S.M.; Ellmann, A.; Ghoorun, S.

2002-01-01

Namibia is a country with 1,8 million inhabitants, of whom the majority has limited access to first world facilities. Nevertheless, medical services of high standard are offered. A Nuclear Medicine Department was established at Windhoek Central Hospital in 1982. A nuclear physician, two nuclear medicine radiographers and a nursing sister staff the department. Equipment includes a Siemens Orbiter and an Elscint Apex SPX Helix gamma camera. Radiopharmaceuticals are obtained from suppliers in South Africa. Investigations performed include musculoskeletal, liver, hepatobiliary, thyroid, renal studies, ventilation perfusion lung scans as well as the following Nuclear Cardiology studies: Gated blood pool scans, Tc-99m pyrophosphate hot spot scans, Tl-201 myocardial perfusion studies, Tc-99m MIBI myocardial perfusion studies and Tl-201 rest-redistribution studies. Problems experienced at the Windhoek Nuclear Medicine department include: Lack of funding and high cost of equipment and radiopharmaceuticals, lack of understanding of Nuclear Medicine by the hospital management and health administrators, and difficulties in procuring short-lived radiopharmaceuticals. Furthermore, the absence of company representatives and spare parts in Namibia leads to loss of time whenever equipment needs to be repaired. Working as the only nuclear medicine physician in a country also poses major problems. Careful management of resources and information drives have helped to sustain the Nuclear Medicine service despite economic problems in the country. Installation of a tele-link between the department in Windhoek Hospital and Tygerberg Hospital in South Africa has greatly assisted to overcome the problem of isolation and lack of back up from fellow specialists. The IAEA has equipped both departments with Hermes workstations (Nuclear Diagnostics) and a tele-link is maintained via modem. The current software provided with the Hermes system is ideally suited to processing of data such as gated

ASSESSMENT OF KNOWLEDGE AND ATTITUDE OF COMPUTER ASSISTED LEARNING AMONG MEDICAL STUDENTS

Directory of Open Access Journals (Sweden)

Ravish

2015-12-01

Full Text Available INTRODUCTION: It is going truth globally that the medical course in medical college students are developed via computer mediated learning.1 Utilization of both the range upon online messages options must create study exciting, monetization, and likely as hired. We Hypothesized that survey will facilitate to permit us to be able to blueprint some on this necessary condition among my medical students and also to improve our study facilities a lot of automatically. A set of closed ended problems remained displayed on departmental website, to evaluate their computer skills and talents and their own assessment in computer and internet skills helping in learning. In the beginning months of 1st year MBBS college students 2014-15 batch taken up voluntarily to the study through MCQs questions provided to them in the form of departmental website. A batch of 50 college students surveyed on 3 different days. Although 80% students were confident with the operational skills of the computer, the opinion regarding the usage of computers for web based learning activities was not uniform i.e., 55% of the participants felt uncomfortable with web assisted activity in comparison to paper based activity. However, 49% were of the opinion that paper based activity might become redundant and websites will take over books in the future. Expansion on computer-assisted study requires traditional changes as well as thoughtful strategic planning, resource giving, staff benefits, Edutainment promotion by multidisciplinary working, and efficient quality control.

A Survey of Students Participating in a Computer-Assisted Education Programme

Science.gov (United States)

Yel, Elif Binboga; Korhan, Orhan

2015-01-01

This paper mainly examines anthropometric data, data regarding the habits, experiences, and attitudes of the students about their tablet/laptop/desktop computer use, in addition to self-reported musculoskeletal discomfort levels and frequencies of students participating in a tablet-assisted interactive education programme. A two-part questionnaire…

Concepts of ‘personalization’ in personalized medicine: implications for economic evaluation

Science.gov (United States)

Rogowski, Wolf; Payne, Katherine; Schnell-Inderst, Petra; Manca, Andrea; Rochau, Ursula; Jahn, Beate; Alagoz, Oguzhan; Leidl, Reiner; Siebert, Uwe

2015-01-01

Context This paper assesses if, and how, existing methods for economic evaluation are applicable to the evaluation of PM and if not, where extension to methods may be required. Method Structured workshop with a pre-defined group of experts (n=47), run using a modified nominal group technique. Workshop findings were recorded using extensive note taking and summarised using thematic data analysis. The workshop was complemented by structured literature searches. Results The key finding emerging from the workshop, using an economic perspective, was that two distinct, but linked, interpretations of the concept of PM exist (personalization by ‘physiology’ or ‘preferences’). These interpretations involve specific challenges for the design and conduct of economic evaluations. Existing evaluative (extra-welfarist) frameworks were generally considered appropriate for evaluating PM. When ‘personalization’ is viewed as using physiological biomarkers, challenges include: representing complex care pathways; representing spill-over effects; meeting data requirements such as evidence on heterogeneity; choosing appropriate time horizons for the value of further research in uncertainty analysis. When viewed as tailoring medicine to patient preferences, further work is needed regarding: revealed preferences, e.g. treatment (non)adherence; stated preferences, e.g. risk interpretation and attitude; consideration of heterogeneity in preferences; and the appropriate framework (welfarism vs. extra-welfarism) to incorporate non-health benefits. Conclusion Ideally, economic evaluations should take account of both interpretations of PM and consider physiology and preferences. It is important for decision makers to be cognizant of the issues involved with the economic evaluation of PM to appropriately interpret the evidence and target future research funding. PMID:25249200

Pulmonary Diseases in the Neonate: A Computer Assisted Instruction

OpenAIRE

Tinsley, Larry; Easa, David

1985-01-01

This project consists of an interactive audiovisual learning program in respiratory diseases in premature and term infants. It is directed towards the primary care physicians to help increase their knowledge base of neonatal pulmonary diseases. This program will teach common respiratory diseases seen in the sick newborn infant by way of interactive computer assisted programs interfaced to a video display terminal showing such things as x-rays, laboratory findings, and physical signs. The need...

[Computer evaluation of hidden potential of phytochemicals of medicinal plants of the traditional Indian ayurvedic medicine].

Science.gov (United States)

Lagunin, A A; Druzhilovsky, D S; Rudik, A V; Filimonov, D A; Gawande, D; Suresh, K; Goel, R; Poroikov, V V

2015-01-01

Applicability of our computer programs PASS and PharmaExpert to prediction of biological activity spectra of rather complex and structurally diverse phytocomponents of medicinal plants, both separately and in combinations has been evaluated. The web-resource on phytochemicals of 50 medicinal plants used in Ayurveda was created for the study of hidden therapeutic potential of Traditional Indian Medicine (TIM) (http://ayurveda.pharmaexpert.ru). It contains information on 50 medicinal plants, their using in TIM and their pharmacology activities, also as 1906 phytocomponents. PASS training set was updated by addition of information about 946 natural compounds; then the training procedure and validation were performed, to estimate the quality of PASS prediction. It was shown that the difference between the average accuracy of prediction obtained in leave-5%-out cross-validation (94,467%) and in leave-one-out cross-validation (94,605%) is very small. These results showed high predictive ability of the program. Results of biological activity spectra prediction for all phytocomponents included in our database are in good correspondence with the experimental data. Additional kinds of biological activity predicted with high probability provide the information about most promising directions of further studies. The analysis of prediction results of sets of phytocomponents in each of 50 medicinal plants was made by PharmaExpert software. Based on this analysis, we found that the combination of phytocomponents from Passiflora incarnata may exhibit nootropic, anticonvulsant and antidepressant effects. Experiments carried out in mice models confirmed the predicted effects of Passiflora incarnata extracts.

Innovation in engineering education through computer assisted learning and virtual university model

Science.gov (United States)

Raicu, A.; Raicu, G.

2015-11-01

The paper presents the most important aspects of innovation in Engineering Education using Computer Assisted Learning. The authors propose to increase the quality of Engineering Education programs of study at European standards. The use of computer assisted learning methodologies in all studies is becoming an important resource in Higher Education. We intend to improve the concept of e-Learning using virtual terminals, online support and assisting special training through live seminars and interactive labs to develop a virtual university model. We intend to encourage computer assisted learning and innovation as sources of competitive advantage, to permit vision and learning analysis, identifies new sources of technology and ideas. Our work is based on our university datasets collected during last fifteen years using several e-Learning systems. In Constanta Maritime University (CMU), using eLearning and Knowledge Management Services (KMS) is very important and we apply it effectively to achieve strategic objectives, such as collaboration, sharing and good practice. We have experience in this field since 2000 year using Moodle as KMS in our university. The term KMS can be associated to Open Source Software, Open Standards, Open Protocols and Open Knowledge licenses, initiatives and policies. In CMU Virtual Campus we have today over 12500 active users. Another experience of the authors is the implementation of MariTrainer Wiki educational platform based on Dokeos and DekiWiki under MARICOMP and MEP Leonardo da Vinci Project. We'll also present in this paper a case study under EU funded project POSDRU, where the authors implemented other educational platform in Technological High Schools from Romania used over 1000 teachers. Based on large datasets the study tries to improve the concept of e-Learning teaching using the revolutionary technologies. The new concept present in this paper is that the teaching and learning will be interactive and live. The new and modern

Conference Report: 18th Conference on Computer-Assisted Qualitative Data Analysis (CAQD) 2016: MAXQDA User Conference

OpenAIRE

Galan-Diaz, Carlos

2017-01-01

During the first week of March 2016, 120 researchers from 12 different countries, including Syria, Japan, the USA and Turkey, met in Berlin (Germany) to learn more about their computer-assisted qualitative data analysis skills. The 18th Conference on Computer-Assisted Qualitative Data Analysis (CAQD) offered several workshops, a research methods poster session, and the opportunity to share and discuss best practice between attendees, trainers and speakers (informally and through the user foru...

[Qualitative and quantitative evaluation of an internal medicine assistance line dedicated to the diagnosis and treatment of diseases for general practice].

Science.gov (United States)

Castillo, J-M; Agard, C; Artifoni, M; Brisseau, J-M; Connault, J; Durant, C; Espitia, O; Masseau, A; Neel, A; Perrin, F; Pistorius, M-A; Planchon, B; Ponge, T; Hamidou, M; Pottier, P

2016-05-01

Clinical reasoning and treatment challenges within the scope of general practice led to the development of an internal medicine assistance line provided by Nantes University Hospital. The primary outcome of this study was to describe callers' profile, their requests and answers provided. A prospective, cross-sectional, observational, descriptive study was undertaken. For each call were identified the calling physician, her/his specialty and work setting, the call's object and adequacy, the answer provided, the time needed to connect with the assistance line, the time devoted by the internal medicine physician to provide an answer to the request, and whether the assistance line prevented a visit to the emergency room. Each calling physician was then called back to obtain demographic and professional characteristics, and data relating to the call and to the assistance line. Sixty-three days were analyzed and 276 calls identified. The 237 identified calling physicians were mainly females (54%, n=93), with a mean age of 46 years, graduated from Nantes University (65%, n=86), practicing ambulatory general medicine (69%, n=164) in Loire-Atlantique department area (82%, n=176) for a mean duration of 15 years. Calls were mostly associated with diagnostic challenges (61%, n=166) concerning clinical issues (57%, n=155). A sole telephone advice was the main type of answer provided (56%, n=147) and a visit to the emergency room was prevented for 17% of calls. The assistance line activity is adequate with its missions and seems to facilitate patients' healthcare delivery advocating for the development of similar structures in other units. Improvements relating to the information, availability and physicians' training should be considered. Copyright © 2015 Société nationale française de médecine interne (SNFMI). Published by Elsevier SAS. All rights reserved.

Research Skills for Journalism Students: From Basics to Computer-Assisted Reporting.

Science.gov (United States)

Drueke, Jeanetta; Streckfuss, Richard

1997-01-01

Despite the availability of computer-assisted research, a survey of 300 newspapers found that many journalists still rely on paper sources or neglect research altogether. This article describes the development and implementation of a beginning reporting course that integrates research skills, demonstrates the value of research in reporting, and…

Computer Assisted Implementation of the 1999 WHO/ISH Hypertension Guidelines

Czech Academy of Sciences Publication Activity Database

Peleška, Jan; Zvára Jr., Karel; Tomečková, Marie; Zvárová, Jana

20 Suppl. 4, - (2002), s. 86 ISSN 0263-6352. [Scientific Meeting of the International Society of Hypertension /19./, Europeean Meeting on Hypertension /12./. 23.06.2002-27.06.2002, Prague] R&D Projects: GA MŠk LN00B107 Grant - others:MGT(XE) EC 4.FP Keywords : guidelines for hypertension * implementation * computer assisted implementation Subject RIV: BA - General Mathematics

Quantitative nuclear medicine imaging: application of computers to the gamma camera and whole-body scanner

International Nuclear Information System (INIS)

Budinger, T.F.

1974-01-01

The following topics are reviewed: properties of computer systems for nuclear medicine quantitation; quantitative information concerning the relation between organ isotope concentration and detected projections of the isotope distribution; quantitation using two conjugate views; three-dimensional reconstruction from projections; quantitative cardiac radioangiography; and recent advances leading to quantitative nuclear medicine of clinical importance. (U.S.)

Introduction of Virtual Patient Software to Enhance Physician Assistant Student Knowledge in Palliative Medicine.

Science.gov (United States)

Prazak, Kristine A

2017-01-01

The purpose of this project was to infuse palliative medicine and end-of-life care creatively into physician assistant (PA) education. Nine second-year PA students volunteered to participate in this quasi-experimental, pretest-posttest pilot study. Students initially completed an anonymous survey evaluating seven domains of knowledge in palliative medicine coupled with a self-assessment in competence. Virtual patient software was then used to simulate clinical encounters that addressed major palliative care domains. Upon completion of these cases, the same survey, with the addition of three questions about their own personal feelings, was administered. Overall response was positive in regard to improved knowledge and the virtual patient experience. After completion of the cases, students rated their self-assessed skills higher in all domains than prior to completing the cases. Factual knowledge scores showed a slight but not significant improvement, with an average pre-survey score of 4.56 and post-survey score of 4.67. Using virtual patient software can be a way of infusing palliative medicine and end-of-life care into PA education. These encounters can then be modified to include interprofessional encounters within the health professions.

Development and Evaluation of an Economic-Driving Assistance Program for Transit Vehicles

OpenAIRE

Baoxin Han; Wanjing Ma; Hanzhou Xie

2012-01-01

This paper focuses on development and evaluation of an economic-driving assistance program for transit vehicles (EDTV) which can minimize energy consumption, air pollution emission of buses, and improve the level of service of transit system as well. Taking advantage of the latest advances in information and communication technologies, the EDTV system can provide bus drivers with optimal recommended bus holding times at near-side bus stops and dynamic bus speed to adapt to the real-time traff...

Computer Assisted Instruction: The Game "Le Choc des Multinationales."

Science.gov (United States)

Cramer, Hazel

"Le Choc de Multinationales" is a microcomputer game for students in an upper-level commercial French couse, to be played by two opponents, one of whom may be another student or the computer itself as a direct business competitor. The game's requirements for language use and knowledge of business and economics theory and principles are moderate,…

The Effectiveness of Computer-Assisted Instruction for Teaching Mathematics to Students with Specific Learning Disability

Science.gov (United States)

Stultz, Sherry L.

2013-01-01

Using computers to teach students is not a new idea. Computers have been utilized for educational purposes for over 80 years. However, the effectiveness of these programs for teaching mathematics to students with specific learning disability is unclear. This study was undertaken to determine if computer-assisted instruction was as effective as…

Computer-assisted navigational surgery enhances safety in dental implantology.

Science.gov (United States)

Ng, F C; Ho, K H; Wexler, A

2005-06-01

Dental implants are increasingly used to restore missing dentition. These titanium implants are surgically installed in the edentulous alveolar ridge and allowed to osteointegrate with the bone during the healing phase. After osseo-integration, the implant is loaded with a prosthesis to replace the missing tooth. Conventional implant treatment planning uses study models, wax-ups and panoramic x-rays to prefabricate surgical stent to guide the preparation of the implant site. The drilling into the alveolar ridge is invariably a "blind" procedure as the part of the drill in bone is not visible. Stereotactic systems were first introduced into neurosurgery in 1986. Since then, computer-assisted navigational technology has brought major advances to neuro-, midface and orthopaedic surgeries, and more recently, to implant placement. This paper illustrates the use of real-time computer-guided navigational technology in enhancing safety in implant surgical procedures. Real-time computer-guided navigational technology enhances accuracy and precision of the surgical procedure, minimises complications and facilitates surgery in challenging anatomical locations.

Directory of computer users in nuclear medicine

International Nuclear Information System (INIS)

Henne, R.L.; Erickson, J.J.; McClain, W.J.; Kirch, D.L.

1977-01-01

The directory is composed of two major divisions, a Users' section and a Vendors' section. The Users' section consists of detailed installation descriptions and indexes to these descriptions. A typical description contains the name, address, type, and size of the institution as well as names of persons to contact. Following the hardware descriptions are listed the type of studies for which the computers are utilized, including the languages used, the method of output and an estimate of how often the study is performed. The Vendors' section contains short descriptions of current commercially available nuclear medicine systems as supplied by the vendors themselves. In order to reduce the amount of obsolete data and to include new institutions in future updates of the directory, a user questionnaire is included

Associations among Teachers' Attitudes towards Computer-Assisted Education and TPACK Competencies

Science.gov (United States)

Baturay, Meltem Huri; Gökçearslan, Sahin; Sahin, Semsettin

2017-01-01

The current study investigates the attitudes of teachers towards Computer-Assisted Education (CAE) and their knowledge of technology, pedagogy and content via TPACK model that assesses the competencies for developing and implementing successful teaching. There were 280 participants in the study. The results of the study indicate that teachers'…

Equine-Assisted Therapies: Complementary Medicine or Not?

Science.gov (United States)

Ratcliffe, Katherine T.; Sanekane, Cindy

2009-01-01

Equine-assisted therapies are interventions that use the unique qualities of a horse to assist persons with disabilities to improve their gross motor, language, social, and self-help skills. Programs offering these services are varied and operate on all major continents across the world. The effectiveness of equine-assisted therapies is generally…

The relationship between venture capital investment and macro economic variables via statistical computation method

Science.gov (United States)

Aygunes, Gunes

2017-07-01

The objective of this paper is to survey and determine the macroeconomic factors affecting the level of venture capital (VC) investments in a country. The literary depends on venture capitalists' quality and countries' venture capital investments. The aim of this paper is to give relationship between venture capital investment and macro economic variables via statistical computation method. We investigate the countries and macro economic variables. By using statistical computation method, we derive correlation between venture capital investments and macro economic variables. According to method of logistic regression model (logit regression or logit model), macro economic variables are correlated with each other in three group. Venture capitalists regard correlations as a indicator. Finally, we give correlation matrix of our results.

A brain-computer interface as input channel for a standard assistive technology software.

Science.gov (United States)

Zickler, Claudia; Riccio, Angela; Leotta, Francesco; Hillian-Tress, Sandra; Halder, Sebastian; Holz, Elisa; Staiger-Sälzer, Pit; Hoogerwerf, Evert-Jan; Desideri, Lorenzo; Mattia, Donatella; Kübler, Andrea

2011-10-01

Recently brain-computer interface (BCI) control was integrated into the commercial assistive technology product QualiWORLD (QualiLife Inc., Paradiso-Lugano, CH). Usability of the first prototype was evaluated in terms of effectiveness (accuracy), efficiency (information transfer rate and subjective workload/NASA Task Load Index) and user satisfaction (Quebec User Evaluation of Satisfaction with assistive Technology, QUEST 2.0) by four end-users with severe disabilities. Three assistive technology experts evaluated the device from a third person perspective. The results revealed high performance levels in communication and internet tasks. Users and assistive technology experts were quite satisfied with the device. However, none could imagine using the device in daily life without improvements. Main obstacles were the EEG-cap and low speed.

[The Computer Book of the Internal Medicine resident: validity and reliability of a questionnaire for self-assessment of competences in internal medicine residents].

Science.gov (United States)

Oristrell, J; Casanovas, A; Jordana, R; Comet, R; Gil, M; Oliva, J C

2012-12-01

There are no simple and validated instruments for evaluating the training of specialists. To analyze the reliability and validity of a computerized self-assessment method to quantify the acquisition of medical competences during the Internal Medicine residency program. All residents of our department participated in the study during a period of 28 months. Twenty-two questionnaires specific for each rotation (the Computer-Book of the Internal Medicine Resident) were constructed with items (questions) corresponding to three competence domains: clinical skills competence, communication skills and teamwork. Reliability was analyzed by measuring the internal consistency of items in each competence domain using Cronbach's alpha index. Validation was performed by comparing mean scores in each competence domain between senior and junior residents. Cut-off levels of competence scores were established in order to identify the strengths and weaknesses of our training program. Finally, self-assessment values were correlated with the evaluations of the medical staff. There was a high internal consistency of the items of clinical skills competences, communication skills and teamwork. Higher scores of clinical skills competence and communication skills, but not in those of teamwork were observed in senior residents than in junior residents. The Computer-Book of the Internal Medicine Resident identified the strengths and weaknesses of our training program. We did not observe any correlation between the results of the self- evaluations and the evaluations made by staff physicians. The items of Computer-Book of the Internal Medicine Resident showed high internal consistency and made it possible to measure the acquisition of medical competences in a team of Internal Medicine residents. This self-assessment method should be complemented with other evaluation methods in order to assess the acquisition of medical competences by an individual resident. Copyright © 2012 Elsevier Espa

Robot-assisted surgery: the future is here.

Science.gov (United States)

Gerhardus, Diana

2003-01-01

According to L. Wiley Nifong, director of robotic surgery at East Carolina University's Brody School of Medicine, "Nationally, only one-fourth of the 15 million surgeries performed each year are done with small incisions or what doctors call 'minimally invasive surgery'." Robots could raise that number substantially (Stark 2002). Currently, healthcare organizations use robot technology for thoracic, abdominal, pelvic, and neurological surgical procedures. Minimally invasive surgery reduces the amount of inpatient hospital days, and the computer in the system filters any hand tremors a physician may have during the surgery. The use of robot-assisted surgery improves quality of care because the patient experiences less pain after the surgery. Robot-assisted surgery demonstrates definite advantages for the patient, physician, and hospital; however, healthcare organizations in the United States have yet to acquire the technology because of implementation costs and the lack of FDA (Food and Drug Administration) approval for using the technology for certain types of heart procedures. This article focuses on robot-assisted surgery advantages to patients, physicians, and hospitals as well as on the disadvantages to physicians. In addition, the article addresses implementation costs, which creates financial hurdles for most healthcare organizations; offers recommendations for administrators to embrace this technology for strategic positioning; and enumerates possible roles for robots in medicine.

A Randomized Rounding Approach for Optimization of Test Sheet Composing and Exposure Rate Control in Computer-Assisted Testing

Science.gov (United States)

Wang, Chu-Fu; Lin, Chih-Lung; Deng, Jien-Han

2012-01-01

Testing is an important stage of teaching as it can assist teachers in auditing students' learning results. A good test is able to accurately reflect the capability of a learner. Nowadays, Computer-Assisted Testing (CAT) is greatly improving traditional testing, since computers can automatically and quickly compose a proper test sheet to meet user…

Providing Assistive Technology Applications as a Service Through Cloud Computing.

Science.gov (United States)

Mulfari, Davide; Celesti, Antonio; Villari, Massimo; Puliafito, Antonio

2015-01-01

Users with disabilities interact with Personal Computers (PCs) using Assistive Technology (AT) software solutions. Such applications run on a PC that a person with a disability commonly uses. However the configuration of AT applications is not trivial at all, especially whenever the user needs to work on a PC that does not allow him/her to rely on his / her AT tools (e.g., at work, at university, in an Internet point). In this paper, we discuss how cloud computing provides a valid technological solution to enhance such a scenario.With the emergence of cloud computing, many applications are executed on top of virtual machines (VMs). Virtualization allows us to achieve a software implementation of a real computer able to execute a standard operating system and any kind of application. In this paper we propose to build personalized VMs running AT programs and settings. By using the remote desktop technology, our solution enables users to control their customized virtual desktop environment by means of an HTML5-based web interface running on any computer equipped with a browser, whenever they are.

Economic Modeling as a Component of Academic Strategic Planning.

Science.gov (United States)

MacKinnon, Joyce; Sothmann, Mark; Johnson, James

2001-01-01

Computer-based economic modeling was used to enable a school of allied health to define outcomes, identify associated costs, develop cost and revenue models, and create a financial planning system. As a strategic planning tool, it assisted realistic budgeting and improved efficiency and effectiveness. (Contains 18 references.) (SK)

Computer Multimedia Assisted English Vocabulary Teaching Courseware

Directory of Open Access Journals (Sweden)

Nan Yue

2017-12-01

Full Text Available English vocabulary is often regarded as the most boring link in English learning. However, English vocabulary is the basis of all aspects of English learning. Therefore, enriching the process of English vocabulary learning and stimulating the interest of English vocabulary learning are the keys to the reform of English vocabulary teaching. The computer multimedia is developing and popularizing rapidly with the rapid development of informationization and networking, which plays its role in more and more fields. The application of multimedia technology in the field of teaching is no longer strange. This paper mainly studied the design of computer multimedia assisted English vocabulary teaching courseware. First of all, this paper gave an overview of computer multimedia technology from the aspects of concept, characteristics, development and application situation, which cited and analyzed the cognitive learning theory and memory law. Under the guidance of scientific laws and in combination with the requirement analysis and pattern construction of English vocabulary teaching, this paper realized the module design, style design and database design of English vocabulary courseware. Finally, the content of English vocabulary teaching courseware was demonstrated, and its application effect was verified through the combination of subjective evaluation and objective evaluation. This article has an important guiding significance for stimulating students’ interest in English vocabulary learning and enhancing the quality of vocabulary teaching.

Nuclear medicine statistics

International Nuclear Information System (INIS)

Martin, P.M.

1977-01-01

Numerical description of medical and biologic phenomena is proliferating. Laboratory studies on patients now yield measurements of at least a dozen indices, each with its own normal limits. Within nuclear medicine, numerical analysis as well as numerical measurement and the use of computers are becoming more common. While the digital computer has proved to be a valuable tool for measurment and analysis of imaging and radioimmunoassay data, it has created more work in that users now ask for more detailed calculations and for indices that measure the reliability of quantified observations. The following material is presented with the intention of providing a straight-forward methodology to determine values for some useful parameters and to estimate the errors involved. The process used is that of asking relevant questions and then providing answers by illustrations. It is hoped that this will help the reader avoid an error of the third kind, that is, the error of statistical misrepresentation or inadvertent deception. This occurs most frequently in cases where the right answer is found to the wrong question. The purposes of this chapter are: (1) to provide some relevant statistical theory, using a terminology suitable for the nuclear medicine field; (2) to demonstrate the application of a number of statistical methods to the kinds of data commonly encountered in nuclear medicine; (3) to provide a framework to assist the experimenter in choosing the method and the questions most suitable for the experiment at hand; and (4) to present a simple approach for a quantitative quality control program for scintillation cameras and other radiation detectors

Computer-assisted surgery for screw insertion into the distal sesamoid bone in horses: an in vitro study.

Science.gov (United States)

Gygax, Diego; Lischer, Christoph; Auer, Joerg A

2006-10-01

To compare the precision of computer-assisted surgery with a conventional technique (CV) using a special guiding device for screw insertion into the distal sesamoid bone in horses. In vitro experimental study. Cadaveric forelimb specimens. Insertion of a 3.5 mm cortex screw in lag fashion along the longitudinal axis of intact (non-fractured) distal sesamoid bones was evaluated in 2 groups (8 limbs each): CV and computer-assisted surgery (CAS). For CV, the screw was inserted using a special guiding device and fluoroscopy, whereas for CAS, the screw was inserted using computer-assisted navigation. The accuracy of screw placement was verified by radiography, computed tomography, and specimen dissection. Surgical precision was better in CAS compared with CV. CAS improves the accuracy of lateromedial screw insertion, in lag fashion, into the distal sesamoid bone. The CAS technique should be considered for improved accuracy of screw insertion in fractures of the distal sesamoid bone.

Computer-Assisted English Learning System Based on Free Conversation by Topic

Science.gov (United States)

Choi, Sung-Kwon; Kwon, Oh-Woog; Kim, Young-Kil

2017-01-01

This paper aims to describe a computer-assisted English learning system using chatbots and dialogue systems, which allow free conversation outside the topic without limiting the learner's flow of conversation. The evaluation was conducted by 20 experimenters. The performance of the system based on a free conversation by topic was measured by the…

Federalism, the economic-industrial health care complex and high-cost pharmaceutical assistance in Brazil.

Science.gov (United States)

da Fonseca, Elize Massard; Costa, Nilson do Rosario

2015-04-01

Brazil has a relevant, although relatively unknown, special medicines programme that distributes high-cost products, such as drugs needed for cancer treatments. In 2009, the purchase of these medicines became the responsibility of the Brazilian Federal Government. Until then, there were no clear norms regarding the responsibilities, in terms of the management/financing of these medicines, of the Brazilian Federal Government and of the states themselves. This qualitative study analyses the policy process needed to transfer this programme to the central government. The study examines the reports of the Tripartite Commission between 2000 and 2012, and in-depth interviews with eleven key informants were conducted. The study demonstrates that throughout the last decade, institutional changes have been made in regard to the federal management of these programmes (such as recentralisation of the purchasing of medicines). It concludes that these changes can be explained because of the efficiency of the coordinating mechanisms of the Federal Government. These findings reinforce the idea that the Ministry of Health is the main driver of public health policies, and it has opted for the recentralisation of activities as a result of the development project implicit in the agenda of the Industrial and Economic Heal.

Information-Processing Correlates of Computer-Assisted Word Learning by Mentally Retarded Students.

Science.gov (United States)

Conners, Frances A.; Detterman, Douglas K.

1987-01-01

Nineteen moderately/severely retarded students (ages 9-22) completed ten 15-minute computer-assisted instruction sessions and seven basic cognitive tasks measuring simple learning, choice reaction time, relearning, probed recall, stimulus discrimination, tachictoscopic threshold, and recognition memory. Stimulus discrimination, probed recall, and…

A novel approach for computer assisted EEG monitoring in the adult ICU

NARCIS (Netherlands)

Cloostermans, M.C.; de Vos, Cecilia Cecilia Clementine; van Putten, Michel Johannes Antonius Maria

2011-01-01

Objective The implementation of a computer assisted system for real-time classification of the electroencephalogram (EEG) in critically ill patients. Methods Eight quantitative features were extracted from the raw EEG and combined into a single classifier. The system was trained with 41 EEG

Consumer attitudes towards computer-assisted self-care of the common cold.

Science.gov (United States)

Reis, J; Wrestler, F

1994-04-01

Knowledge of colds and flu and attitudes towards use of computers for self-care are compared for 260 young adult users and 194 young adult non-users of computer-assisted self-care for colds and flu. Participants completed a knowledge questionnaire on colds and flu, used a computer program designed to enhance self-care for colds and flu, and then completed a questionnaire on their attitudes towards using a computer for self-care for colds and flu, and then completed a questionnaire on their attitudes towards using a computer for self-care for colds and flu, perceived importance of physician interactions, physician expertise, and patient-physician communication. Compared with users, non-users preferred personal contact with their physicians and felt that computerized health assessments would be limited in vocabulary and range of current medical information. Non-users were also more likely to agree that people could not be trusted to do an accurate computerized health assessment and that the average person was too computer illiterate to use computers for self-care.

Computed tomographic practice and dosimetry: implications for nuclear medicine: editorial

International Nuclear Information System (INIS)

Mountford, P.J.; Harding, L.K.

1992-01-01

This editorial briefly discusses the results of an NRPB survey of x-ray computed tomography practice and dosimetry in the UK. A wide variation in practice and patient doses was revealed. The implications for nuclear medicine are considered. The NRPB is to issue formal guidance on protection of the patient undergoing a CT investigation with the aim of achieving a more systematic approach to the justification and optimization of such exposures. (UK)

A systematic review and checklist presenting the main challenges for health economic modeling in personalized medicine : towards implementing patient-level models

NARCIS (Netherlands)

Degeling, Koen; Koffijberg, Hendrik; IJzerman, Maarten Joost

2017-01-01

Introduction: The ongoing development of genomic medicine and the use of molecular and imaging markers in personalized medicine (PM) has arguably challenged the field of health economic modeling (HEM). This study aims to provide detailed insights into the current status of HEM in PM, in order to

The Regional Comprehensive Economic Partnership, Intellectual Property Protection, and Access to Medicines.

Science.gov (United States)

Townsend, Belinda; Gleeson, Deborah; Lopert, Ruth

2016-11-01

The inclusion of elevated standards of intellectual property (IP) protection in the recently negotiated Trans-Pacific Partnership (TPP) agreement has raised serious public health concerns regarding access to medicines. A lesser-known trade agreement under negotiation in the Asia-Pacific region is the Regional Comprehensive Economic Partnership (RCEP). Framed as an attempt to reassert ASEAN's position in response to the United States-led TPP, RCEP includes key players China and India as well as several low- and middle-income countries (LMICs). Leaked drafts of IP provisions proposed by Japan and South Korea raise similar concerns in the Asia-Pacific region. This article identifies TRIPS (Trade Related Aspects of Intellectual Property Rights agreement)-Plus provisions in leaked negotiating texts and examines their implications for LMICs that are not also parties to the TPP: Cambodia, Indonesia, Laos, Myanmar, the Philippines, Thailand, China, and India. We find that higher levels of IP protection delay the market entry of generic medicines, giving rise to increased costs to governments and reduced access to essential medicines. The article concludes that the public health community should recognize risks inherent in trade agreements that promote expansions of IP rights and engage with governments to ensure that public health is adequately and explicitly protected in trade and investment negotiations. © 2016 APJPH.

Decision Sciences, Economics, Finance, Business, Computing, and Big Data: Connections

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); M.J. McAleer (Michael); W.-K. Wong (Wing-Keung)

2018-01-01

textabstractThis paper provides a review of some connecting literature in Decision Sciences, Economics, Finance, Business, Computing, and Big Data. We then discuss some research that is related to the six cognate disciplines. Academics could develop theoretical models and subsequent

Nurse practitioners and physician assistants: preparing new providers for hospital medicine at the mayo clinic.

Science.gov (United States)

Spychalla, Megan T; Heathman, Joanne H; Pearson, Katherine A; Herber, Andrew J; Newman, James S

2014-01-01

Hospital medicine is a growing field with an increasing demand for additional healthcare providers, especially in the face of an aging population. Reductions in resident duty hours, coupled with a continued deficit of medical school graduates to appropriately meet the demand, require an additional workforce to counter the shortage. A major dilemma of incorporating nonphysician providers such as nurse practitioners and physician assistants (NPPAs) into a hospital medicine practice is their varying academic backgrounds and inpatient care experiences. Medical institutions seeking to add NPPAs to their hospital medicine practice need a structured orientation program and ongoing NPPA educational support. This article outlines an NPPA orientation and training program within the Division of Hospital Internal Medicine (HIM) at the Mayo Clinic in Rochester, MN. In addition to a practical orientation program that other institutions can model and implement, the division of HIM also developed supplemental learning modalities to maintain ongoing NPPA competencies and fill learning gaps, including a formal NPPA hospital medicine continuing medical education (CME) course, an NPPA simulation-based boot camp, and the first hospital-based NPPA grand rounds offering CME credit. Since the NPPA orientation and training program was implemented, NPPAs within the division of HIM have gained a reputation for possessing a strong clinical skill set coupled with a depth of knowledge in hospital medicine. The NPPA-physician model serves as an alternative care practice, and we believe that with the institution of modalities, including a structured orientation program, didactic support, hands-on learning, and professional growth opportunities, NPPAs are capable of fulfilling the gap created by provider shortages and resident duty hour restrictions. Additionally, the use of NPPAs in hospital medicine allows for patient care continuity that is otherwise missing with resident practice models.

Preparation and use of plant medicines for farmers' health in Southwest Nigeria: socio-cultural, magico-religious and economic aspects

Science.gov (United States)

2010-01-01

Agrarian rural dwellers in Nigeria produce about 95% of locally grown food commodities. The low accessibility to and affordability of orthodox medicine by rural dwellers and their need to keep healthy to be economically productive, have led to their dependence on traditional medicine. This paper posits an increasing acceptance of traditional medicine country-wide and advanced reasons for this trend. The fact that traditional medicine practitioners' concept of disease is on a wider plane vis-à-vis orthodox medicine practitioners' has culminated in some socio-cultural and magico-religious practices observed in preparation and use of plant medicines for farmers' health management. Possible scientific reasons were advanced for some of these practices to show the nexus between traditional medicine and orthodox medicine. The paper concludes that the psychological aspect of traditional medicine are reflected in its socio-cultural and magico-religious practices and suggests that government should fund research into traditional medicine to identify components of it that can be integrated into the national health system. PMID:20089149

Preparation and use of plant medicines for farmers' health in Southwest Nigeria: socio-cultural, magico-religious and economic aspects

Directory of Open Access Journals (Sweden)

Oguntade Adegboyega E

2010-01-01

Full Text Available Abstract Agrarian rural dwellers in Nigeria produce about 95% of locally grown food commodities. The low accessibility to and affordability of orthodox medicine by rural dwellers and their need to keep healthy to be economically productive, have led to their dependence on traditional medicine. This paper posits an increasing acceptance of traditional medicine country-wide and advanced reasons for this trend. The fact that traditional medicine practitioners' concept of disease is on a wider plane vis-à-vis orthodox medicine practitioners' has culminated in some socio-cultural and magico-religious practices observed in preparation and use of plant medicines for farmers' health management. Possible scientific reasons were advanced for some of these practices to show the nexus between traditional medicine and orthodox medicine. The paper concludes that the psychological aspect of traditional medicine are reflected in its socio-cultural and magico-religious practices and suggests that government should fund research into traditional medicine to identify components of it that can be integrated into the national health system.

Socio-economic differences in use of prescribed and over-the-counter medicine for pain and psychological problems among Danish adolescents

DEFF Research Database (Denmark)

Kirkeby, Mette Jorgine; Hansen, Claus Dalsgaard; Andersen, JH

2014-01-01

of medicine for pain and psychological problems according to parental educational level and household income. Young girls used twice as much medicine for pain and psychological problems compared to young boys. SES differences based on parental educational level were directly associated with the use...... in the use of prescribed medicine for pain. Conclusion: The risk of use of prescribed medicine for psychological problems increased in adolescents with decreasing parental education, while the risk of overall medicine use and use of over-the-counter medicine was increased in adolescents from low household......The objective for this study was to investigate socio-economic status (SES) differentials in the use of overthe- counter and prescribed medicine for pain and psychological problems among adolescents. Data consisted of questionnaire data on medicine use and health status, collected from 17- to 18...

Medicine as business and profession.

Science.gov (United States)

Agich, G J

1990-12-01

This paper analyzes one dimension of the frequently alleged contradiction between treating medicine as a business and as a profession, namely the incompatibility between viewing the physician patient relationship in economic and moral terms. The paper explores the utilitarian foundations of economics and the deontological foundations of professional medical ethics as one source for the business/medicine conflict that influences beliefs about the proper understanding of the therapeutic relationship. It then, focuses on the contrast and distinction between medicine as business and profession by critically analyzing the classic economic view of the moral status of medicine articulated by Kenneth Arrow. The paper concludes with a discussion of some advantages associated with regarding medicine as a business.

Usability of an adaptive computer assistant that improves self-care and health literacy of older adults

NARCIS (Netherlands)

Blanson Henkemans, O.A.; Rogers, W.A.; Fisk, A.D.; Neerincx, M.A.; Lindenberg, J.; Mast, C.A.P.G. van der

2008-01-01

Objectives: We developed an adaptive computer assistant for the supervision of diabetics' self-care, to support limiting illness and need for acute treatment, and improve health literacy. This assistant monitors self-care activities logged in the patient's electronic diary. Accordingly, it provides

Nuclear medicine

International Nuclear Information System (INIS)

Lentle, B.C.

1986-01-01

Several growth areas for nuclear medicine were defined. Among them were: cardiac nuclear medicine, neuro-psychiatric nuclear medicine, and cancer diagnosis through direct tumor imaging. A powerful new tool, Positron Emission Tomography (PET) was lauded as the impetus for new developments in nuclear medicine. The political environment (funding, degree of autonomy) was discussed, as were the economic and scientific environments

The Effects of Computer-Assisted Instruction of Simple Circuits on Experimental Process Skills

Directory of Open Access Journals (Sweden)

Şeyma ULUKÖK

2013-01-01

Full Text Available The experimental and control groups were composed of 30 sophomores majoring in Classroom Teaching for this study investigating the effects of computer-assisted instruction of simple circuits on the development of experimental process skills. The instruction includes experiments and studies about simple circuits and its elements (serial, parallel, and mixed conncetions of resistors covered in Science and Technology Laboratory II course curriculum. In this study where quantitative and qualitative methods were used together, the control list developed by the researchers was used to collect data. Results showed that experimental process skills of sophomores in experimental group were more developed than that of those in control group. Thus, it can be said that computer-assisted instruction has a positive impact on the development of experimental process skills of students.

Directory of computer users in nuclear medicine

Energy Technology Data Exchange (ETDEWEB)

Henne, R.L.; Erickson, J.J.; McClain, W.J.; Kirch, D.L.

1977-01-01

The directory is composed of two major divisions, a Users' section and a Vendors' section. The Users' section consists of detailed installation descriptions and indexes to these descriptions. A typical description contains the name, address, type, and size of the institution as well as names of persons to contact. Following the hardware descriptions are listed the type of studies for which the computers are utilized, including the languages used, the method of output and an estimate of how often the study is performed. The Vendors' section contains short descriptions of current commercially available nuclear medicine systems as supplied by the vendors themselves. In order to reduce the amount of obsolete data and to include new institutions in future updates of the directory, a user questionnaire is included. (HLW)

Precision medicine, an approach for development of the future medicine technologies

Directory of Open Access Journals (Sweden)

Iraj Nabipour

2016-04-01

Full Text Available Precision medicine is an approach in medicine that takes into account individual differences in people's genes, environments, and lifestyle. This field of medicine redefines our understanding of disease onset and progression, treatment response, and health outcomes through the more precise measurement of molecular, environmental, and behavioral factors that contribute to health and disease. Undoubtedly, the advances in omics technologies including genomics, data collection and storage, computational analysis, and mobile health applications over the last decade produced significant progress for precision medicine. In fact, precision medicine is a platform for the growth of personalized medicine, wearable biosensors, mobile health, computational sciences, genomic singularity, and other omics technologies. In the pathway of precision medicine, mathematics and computational sciences will be revolutionized to overcome the challenges in Big Data. By the birth of precision medicine, novel therapeutic strategies for chronic complex diseases such as cardiovascular disease and cancers would be designed in Systems Medicine.

Economic Literacy Indicators at the Department of Computer Education & Instructional Technologies

Directory of Open Access Journals (Sweden)

Sevgi GEREK

2010-06-01

Full Text Available Developments in technology and communication in the 21st century have led to increased expectations from individuals. One of these expectation areas is literacy. As a requirement of the information age, it can be said that the economic literacy is one of the most important areas of literacy. Economic literacy can be defined in terms of ability to revise the alternatives for interpreting economic problems and finding solutions to these problems, to define the cost and profits, to investigate the effects of changes in economic conditions and in public policies, to gather and organize economy-related data and to balance the profits and costs. One of the tools that affect the life can be said economic literacy but it is a neglected area in most higher education programs. In this study, Computer Education and Instructional Technology program courses were examined within the framework of economic literacy indicators

Detection of defects in logs using computer assisted tomography (CAT) scanning

International Nuclear Information System (INIS)

Tonner, P.D.; Lupton, L.R.

1985-01-01

The Chalk River Nuclear Laboratories of AECL have performed a preliminary feasibility study on the applicability of computer assisted tomographic techniques to detect the internal structure of logs. Cross sections of three logs have been obtained using a medical CAT scanner. The results show that knots, rot and growth rings are easily recognized in both dry and wet logs

Computer assisted visualization of digital mammography images

International Nuclear Information System (INIS)

Funke, M.; Breiter, N.; Grabbe, E.; Netsch, T.; Biehl, M.; Peitgen, H.O.

1999-01-01

Purpose: In a clinical study, the feasibility of using a mammography workstation for the display and interpretation of digital mammography images was evaluated and the results were compared with the corresponding laser film hard copies. Materials and Methods: Digital phosphorous plate radiographs of the entire breast were obtained in 30 patients using a direct magnification mammography system. The images were displayed for interpretation on the computer monitor of a dedicated mammography workstation and also presented as laser film hard copies on a film view box for comparison. The images were evaluted with respect to the image handling, the image quality and the visualization of relevant structures by 3 readers. Results: Handling and contrast of the monitor displayed images were found to be superior compared with the film hard copies. Image noise was found in some cases but did not compromise the interpretation of the monitor images. The visualization of relevant structures was equal with both modalities. Altogether, image interpretation with the mammography workstation was considered to be easy, quick and confident. Conclusions: Computer-assisted visualization and interpretation of digital mammography images using a dedicated workstation can be performed with sufficiently high diagnostic accuracy. (orig.) [de

Effect of Premolar Axial Wall Height on Computer-Aided Design/Computer-Assisted Manufacture Crown Retention.

Science.gov (United States)

Martin, Curt; Harris, Ashley; DuVall, Nicholas; Wajdowicz, Michael; Roberts, Howard Wayne

2018-03-28

To evaluate the effect of premolar axial wall height on the retention of adhesive, full-coverage, computer-aided design/computer-assisted manufacture (CAD/CAM) restorations. A total of 48 premolar teeth randomized into four groups (n = 12 per group) received all-ceramic CAD/CAM restorations with axial wall heights (AWH) of 3, 2, 1, and 0 mm and 16-degree total occlusal convergence (TOC). Specimens were restored with lithium disilicate material and cemented with self-adhesive resin cement. Specimens were loaded to failure after 24 hours. The 3- and 2-mm AWH specimens demonstrated significantly greater failure load. Failure analysis suggests a 2-mm minimum AWH for premolars with a TOC of 16 degrees. Adhesive technology may compensate for compromised AWH.

Medicinal electrochemistry: integration of electrochemistry, medicinal chemistry and computational chemistry.

Science.gov (United States)

Almeida, M O; Maltarollo, V G; de Toledo, R A; Shim, H; Santos, M C; Honorio, K M

2014-01-01

Over the last centuries, there were many important discoveries in medicine that were crucial for gaining a better understanding of several physiological processes. Molecular modelling techniques are powerful tools that have been successfully used to analyse and interface medicinal chemistry studies with electrochemical experimental results. This special combination can help to comprehend medicinal chemistry problems, such as predicting biological activity and understanding drug action mechanisms. Electrochemistry has provided better comprehension of biological reactions and, as a result of many technological improvements, the combination of electrochemical techniques and biosensors has become an appealing choice for pharmaceutical and biomedical analyses. Therefore, this review will briefly outline the present scope and future advances related to the integration of electrochemical and medicinal chemistry approaches based on various applications from recent studies.

Validation of an Improved Computer-Assisted Technique for Mining Free-Text Electronic Medical Records.

Science.gov (United States)

Duz, Marco; Marshall, John F; Parkin, Tim

2017-06-29

The use of electronic medical records (EMRs) offers opportunity for clinical epidemiological research. With large EMR databases, automated analysis processes are necessary but require thorough validation before they can be routinely used. The aim of this study was to validate a computer-assisted technique using commercially available content analysis software (SimStat-WordStat v.6 (SS/WS), Provalis Research) for mining free-text EMRs. The dataset used for the validation process included life-long EMRs from 335 patients (17,563 rows of data), selected at random from a larger dataset (141,543 patients, ~2.6 million rows of data) and obtained from 10 equine veterinary practices in the United Kingdom. The ability of the computer-assisted technique to detect rows of data (cases) of colic, renal failure, right dorsal colitis, and non-steroidal anti-inflammatory drug (NSAID) use in the population was compared with manual classification. The first step of the computer-assisted analysis process was the definition of inclusion dictionaries to identify cases, including terms identifying a condition of interest. Words in inclusion dictionaries were selected from the list of all words in the dataset obtained in SS/WS. The second step consisted of defining an exclusion dictionary, including combinations of words to remove cases erroneously classified by the inclusion dictionary alone. The third step was the definition of a reinclusion dictionary to reinclude cases that had been erroneously classified by the exclusion dictionary. Finally, cases obtained by the exclusion dictionary were removed from cases obtained by the inclusion dictionary, and cases from the reinclusion dictionary were subsequently reincluded using Rv3.0.2 (R Foundation for Statistical Computing, Vienna, Austria). Manual analysis was performed as a separate process by a single experienced clinician reading through the dataset once and classifying each row of data based on the interpretation of the free

Pharmacokinetic study with computational tools in the medicinal chemistry course

Directory of Open Access Journals (Sweden)

Monique Araújo de Brito

2011-12-01

Full Text Available To improve the teaching-learning process in the Medicinal Chemistry course, new strategies have been incorporated into practical classes of this fundamental discipline of the pharmaceutical curriculum. Many changes and improvements have been made in the area of medicinal chemistry so far, and students should be prepared for these new approaches with the use of technological resources in this field. Practical activities using computational techniques have been directed to the evaluation of chemical and physicochemical properties that affect the pharmacokinetics of drugs. Their objectives were to allow students to know these tools, to learn how to access them, to search for the structures of drugs and to analyze results. To the best of our knowledge, this is the first study in Brazil to demonstrate the use of computational practices in teaching pharmacokinetics. Practical classes using Osiris and Molinspiration were attractive to students, who developed the activities easily and acquired better theoretical knowledge.Para melhorar o processo ensino-aprendizagem no curso de Química Medicinal novas estratégias estão sendo incorporadas às aulas práticas desta disciplina fundamental do currículo farmacêutico. Muitas mudanças e melhorias vêm marcando a área de química medicinal e por isso é importante que os alunos sejam colocados nestas novas abordagens na área, com a utilização de recursos tecnológicos. As atividades práticas foram direcionadas para a avaliação dos dados químicos e físico-químicos de fármacos que influenciam as propriedades farmacocinéticas com o auxílio de técnicas computacionais. Os objetivos foram permitir aos alunos conhecer essas ferramentas, saber como acessá-las, procurar as estruturas de fármacos e analisar os resultados. Este é o primeiro estudo publicado no Brasil que apresenta aula prática computacional sobre o tema farmacocinética. As aulas práticas utilizando os servidores Osiris e

Computer assisted surgery for malunited fractures in upper limb

International Nuclear Information System (INIS)

Yoneda, Masahiro; Kazuki, Kenichi; Uemura, Takuya; Okada, Mitsuhiro; Takaoka, Kunio

2006-01-01

Our objective was to evaluate the usefulness of computer-assisted preoperative simulation of malunited fractures in the upper limb. Ten patients with malunited fractures underwent multislice computed tomography of both upper limbs with reconstruction of three-dimensional bone models using three-dimensional (3D) software. Preoperative simulation was comprised of four main procedures: performance of virtual corrective osteotomy, matching of reposition with a mirror-image model of the unaffected side, creating new data for the bone defect, and machining of an hydroxyapatite block as bone graft. In addition, we used full-sized three-dimensional virtual reality modeling with a rapid prototyping molding device, and performed preoperative rehearsals of osteotomies using plaster models. All patients tolerated the surgical procedure well. This technique permits the surgeon to recognize and correct three-dimensional deformities of malunited fracture with both accuracy and precision. (author)

Workshop on Computational Optimization

CERN Document Server

2016-01-01

This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2014, held at Warsaw, Poland, September 7-10, 2014. The book presents recent advances in computational optimization. The volume includes important real problems like parameter settings for controlling processes in bioreactor and other processes, resource constrained project scheduling, infection distribution, molecule distance geometry, quantum computing, real-time management and optimal control, bin packing, medical image processing, localization the abrupt atmospheric contamination source and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others. This research demonstrates how some real-world problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks.

A comparative study between xerographic, computer-assisted overlay generation and animated-superimposition methods in bite mark analyses.

Science.gov (United States)

Tai, Meng Wei; Chong, Zhen Feng; Asif, Muhammad Khan; Rahmat, Rabiah A; Nambiar, Phrabhakaran

2016-09-01

This study was to compare the suitability and precision of xerographic and computer-assisted methods for bite mark investigations. Eleven subjects were asked to bite on their forearm and the bite marks were photographically recorded. Alginate impressions of the subjects' dentition were taken and their casts were made using dental stone. The overlays generated by xerographic method were obtained by photocopying the subjects' casts and the incisal edge outlines were then transferred on a transparent sheet. The bite mark images were imported into Adobe Photoshop® software and printed to life-size. The bite mark analyses using xerographically generated overlays were done by comparing an overlay to the corresponding printed bite mark images manually. In computer-assisted method, the subjects' casts were scanned into Adobe Photoshop®. The bite mark analyses using computer-assisted overlay generation were done by matching an overlay and the corresponding bite mark images digitally using Adobe Photoshop®. Another comparison method was superimposing the cast images with corresponding bite mark images employing the Adobe Photoshop® CS6 and GIF-Animator©. A score with a range of 0-3 was given during analysis to each precision-determining criterion and the score was increased with better matching. The Kruskal Wallis H test showed significant difference between the three sets of data (H=18.761, p<0.05). In conclusion, bite mark analysis using the computer-assisted animated-superimposition method was the most accurate, followed by the computer-assisted overlay generation and lastly the xerographic method. The superior precision contributed by digital method is discernible despite the human skin being a poor recording medium of bite marks. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Computer-assisted planning and dosimetry for radiation treatment of head and neck cancer in Cameroon

International Nuclear Information System (INIS)

Yomi, J.; Ngniah, A.; Kingue, S.; Muna, W.F.T.; Durosinmi-Etti, F.A.

1995-01-01

This evaluation was part of a multicenter, multinational study sponsored by the International Agency for Atomic Energy (Vienna) to investigate a simple, reliable computer-assisted planning and dosimetry system for radiation treatment of head and neck cancers in developing countries. Over a 13-month period (April 1992-April 1993), 120 patients with histologically-proven head or neck cancer were included in the evaluation. In each patient, planning and dosimetry were done both manually and using the computer-assisted system. The manual and computerized systems were compared on the basis of accuracy of determination of the outer contour, target volume, and critical organs; volume inequality resolution; structure heterogeneity correction; selection of the number, angle, and size of beams; treatment time calculation; availability of dosimetry predictions; and duration and cost of the procedure. Results demonstrated that the computer-assisted procedure was superior over the manual procedure, despite less than optimal software. The accuracy provided by the completely computerized procedure is indispensable for Level II radiation therapy, which is particularly useful in tumors of the sensitive, complex structures in the head and neck. (authors). 7 refs., 3 tabs

Attitudes of Jordanian Undergraduate Students towards Using Computer Assisted Language Learning (CALL)

Science.gov (United States)

Saeed, Farah Jamal Abed Alrazeq; Al-Zayed, Norma Nawaf

2018-01-01

The study aimed at investigating the attitudes of Jordanian undergraduate students towards using computer assisted-language learning (CALL) and its effectiveness in the process of learning the English language. In order to fulfill the study's objective, the researchers used a questionnaire to collect data, followed-up with semi-structured…

Computer Assisted Comprehension of Distant Worlds: Understanding Hunger Dynamics in Africa.

Science.gov (United States)

Moseley, William G.

2001-01-01

Describes a computer program called RiskMap. Explains that after completing an assignment on rural economics and hunger dynamics in Africa, students showed an increased level of understanding and felt that using RiskMap was helpful in learning the material. Includes references. (DAJ)

Using the ICF in economic analyses of Assistive Technology systems: methodological implications of a user standpoint.

Science.gov (United States)

Schraner, Ingrid; De Jonge, Desleigh; Layton, Natasha; Bringolf, Jane; Molenda, Agata

2008-01-01

This paper identifies key methodological issues for economic analyses of costs and effectiveness of Assistive Technology (AT) systems based on the International Classification of Functioning, Disability and Health (ICF). Following the biopsychosocial model of the ICF, the paper explores the consequences for cost-effectiveness analyses of AT systems when a user centred approach is taken. In so doing, the paper questions the fiction of neutrality in economic analyses and discusses the distinction between weak and strong objectivity. Costs are measured as all resources used when providing a particular level of environmental facilitators and reducing environmental barriers for an AT user, while effectiveness is measured in terms of the resulting increase in activities and participation of the AT user. The ICF's fourth qualifier for activities and participation, which denotes performance without assistance is used to identify the additional performance achieved due to the particular environmental factors in the current situation (first qualifier). A fifth qualifier for activities and participation is introduced to denote performance with optimal assistance, and the fourth qualifier is then again used to identify the increase in activities and participation due to the environmental factors in the situation with optimal assistance. The effectiveness that an AT user achieves in his or her current situation can be compared with the effectiveness he or she could achieve when provided with what is considered an optimal AT system based on current technologies and user priorities. This comparison throws into sharp relief the role of AT systems as well as of universal design (UD) in reducing environmental barriers for AT users in a way that is cost-effective for society as a whole. Cost-effectiveness analysis based on the ICF can provide powerful economic evidence for how best to allocate existing funding for AT systems. We can identify three particular scenarios in which clear

Design and Construction of Computer-Assisted Instructional Material: A Handbook for Reading/Language Arts Teachers.

Science.gov (United States)

Balajthy, Ernest

Intended for reading and language arts teachers at all educational levels, this guide presents information to be used by teachers in constructing their own computer assisted educational software using the BASIC programming language and Apple computers. Part 1 provides an overview of the components of traditional tutorial and drill-and-practice…

Computer-Assisted Mathematics Instruction for Students with Specific Learning Disability: A Review of the Literature

Science.gov (United States)

Stultz, Sherry L.

2017-01-01

This review was conducted to evaluate the current body of scholarly research regarding the use of computer-assisted instruction (CAI) to teach mathematics to students with specific learning disability (SLD). For many years, computers are utilized for educational purposes. However, the effectiveness of CAI for teaching mathematics to this specific…

A Comparison of Computer-Assisted Instruction and Tutorials in Hematology and Oncology.

Science.gov (United States)

Garrett, T. J.; And Others

1987-01-01

A study comparing the effectiveness of computer-assisted instruction (CAI) and small group instruction found no significant difference in medical student achievement in oncology but higher achievement through small-group instruction in hematology. Students did not view CAI as more effective, but saw it as a supplement to traditional methods. (MSE)

Promoting Creativity through Assessment: A Formative Computer-Assisted Assessment Tool for Teachers

Science.gov (United States)

Cropley, David; Cropley, Arthur

2016-01-01

Computer-assisted assessment (CAA) is problematic when it comes to fostering creativity, because in educational thinking the essence of creativity is not finding the correct answer but generating novelty. The idea of "functional" creativity provides rubrics that can serve as the basis for forms of CAA leading to either formative or…

Performance analysis of a solar-assisted swimming pool heating system

Energy Technology Data Exchange (ETDEWEB)

Alkhamis, A I; Sherif, S A [Miami Univ., Coral Gables, FL (United States). Dept. of Mechanical Engineering

1991-12-31

This paper discusses feasibility studies for a solar-assisted heating system using a computer simulation program. The solar heating is accomplished by employing hot water generated by heat exchange with the solar collector working fluid. The performance of the system is analysed from both thermodynamic and economic standpoints and general conclusions are reached. 17 refs., 7 figs.

Developing Computer-Assisted Instruction Multimedia For Educational Technology Course of Coastal Area Students

Science.gov (United States)

Idris, Husni; Nurhayati, Nurhayati; Satriani, Satriani

2018-05-01

This research aims to a) identify instructional software (interactive multimedia CDs) by developing Computer-Assisted Instruction (CAI) multimedia that is eligible to be used in the instruction of the Educational Technology course; b) analysis the role of instructional software (interactive multimedia CDs) on the Educational Technology course through the development of Computer-Assisted Instruction (CAI) multimedia to improve the quality of education and instructional activities. This is Research and Development (R&D). It employed the descriptive procedural model of development, which outlines the steps to be taken to develop a product, which is instructional multimedia. The number of subjects of the research trial or respondents for each stage was 20 people. To maintain development quality, an expert in materials outside the materials under study, an expert in materials who is also a Educational Technology lecturer, a small groupof 3 students, a medium-sized group of 10 students, and 20 students to participate in the field testing took part in this research. Then, data collection instruments were developed in two stages, namely: a) developing the instruments; and b) trying out instruments. Data on students’ responses were collected using questionnaires and analyzed using descriptive statistics with percentage and categorization techniques. Based on data analysis results, it is revealed that the Computer-Assisted Instruction (CAI) multimedia developed and tried out among students during the preliminary field testing falls into the “Good” category, with the aspects of instruction, materials, and media falling into the “Good” category. Subsequently, results of the main field testing among students also suggest that it falls into the “Good” category, with the aspects of instruction, materials, and media falling into the “Good” category. Similarly, results of the operational field testing among students also suggest that it falls into the �

New Computer Assisted Diagnostic to Detect Alzheimer Disease

Directory of Open Access Journals (Sweden)

Ben Rabeh Amira

2016-08-01

Full Text Available We describe a new Computer Assisted Diagnosis (CAD to automatically detect Alzheimer Patients (AD, Mild Cognitive Impairment (MCI and elderly Controls, based on the segmentation and classification of the Hippocampus (H and Corpus Calosum (CC from Magnetic Resonance Images (MRI. For the segmentation we used a new method based on a deformable model to extract the area wishes, and then we computed the geometric and texture features. For the classification we proposed a new supervised method. We evaluated the accuracy of our method in a group of 25 patients with AD (age±standard-deviation (SD =70±6 years, 25 patients with MCI (age±SD=65±8 years and 25 elderly healthy controls (age±SD=60±8 years. For the AD patients we found an accuracy of the classification of 92%, for the MCI we found 88% and for the elderly patients we found 96%. Overall, we found our method to be 92% accurate. Our method can be a useful tool for diagnosing Alzheimer’s Disease in any of these Steps.

Computer-assisted training in the thermal production department

International Nuclear Information System (INIS)

Felgines, R.

1985-01-01

For many years now, in the United States and Canada, computer-assisted training (CAT) experiments have been carried out in various fields: general or professional education, student testing in universities. This method seems very promising and particularly for continuing education and for keeping industrial process operating and maintenance personnel abreast of their specialities. Thanks to the progress in data processing and remote processing with central computers, this technique is being developed in France for professional training applications. Faced with many training problems, the Thermal Production Department of EDF (Electricite de France) first conducted in 1979 a test involving a limited subset of the nuclear power station operating personnel; this course amounted to some ten hours with very limited content. It seemed promising enough, so that in 1981, a real test was launched at 4 PWR plants: DAMPIERRE, FESSENHEIM, GRAVELINES, TRICASTIN. This test which involves about 700 employees has been fruitful and we decided to generalise this system to all the French nuclear power plants (40 units of 900 and 1300 MW). (author)

Secondary School Students' Attitudes towards Mathematics Computer--Assisted Instruction Environment in Kenya

Science.gov (United States)

Mwei, Philip K.; Wando, Dave; Too, Jackson K.

2012-01-01

This paper reports the results of research conducted in six classes (Form IV) with 205 students with a sample of 94 respondents. Data represent students' statements that describe (a) the role of Mathematics teachers in a computer-assisted instruction (CAI) environment and (b) effectiveness of CAI in Mathematics instruction. The results indicated…

Climate Change Discourse in Mass Media: Application of Computer-Assisted Content Analysis

Science.gov (United States)

Kirilenko, Andrei P.; Stepchenkova, Svetlana O.

2012-01-01

Content analysis of mass media publications has become a major scientific method used to analyze public discourse on climate change. We propose a computer-assisted content analysis method to extract prevalent themes and analyze discourse changes over an extended period in an objective and quantifiable manner. The method includes the following: (1)…

Big Data, Computational Science, Economics, Finance, Marketing, Management, and Psychology: Connections

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); M.J. McAleer (Michael); W.-K. Wong (Wing-Keung)

2018-01-01

textabstractThe paper provides a review of the literature that connects Big Data, Computational Science, Economics, Finance, Marketing, Management, and Psychology, and discusses some research that is related to the seven disciplines. Academics could develop theoretical models and subsequent

Computer-Assisted Inverse Design of Inorganic Electrides

Directory of Open Access Journals (Sweden)

Yunwei Zhang

2017-02-01

Full Text Available Electrides are intrinsic electron-rich materials enabling applications as excellent electron emitters, superior catalysts, and strong reducing agents. There are a number of organic electrides; however, their instability at room temperature and sensitivity to moisture are bottlenecks for their practical uses. Known inorganic electrides are rare, but they appear to have greater thermal stability at ambient conditions and are thus better characterized for application. Here, we develop a computer-assisted inverse-design method for searching for a large variety of inorganic electrides unbiased by any known electride structures. It uses the intrinsic property of interstitial electron localization of electrides as the global variable function for swarm intelligence structure searches. We construct two rules of thumb on the design of inorganic electrides pointing to electron-rich ionic systems and low electronegativity of the cationic elements involved. By screening 99 such binary compounds through large-scale computer simulations, we identify 24 stable and 65 metastable new inorganic electrides that show distinct three-, two-, and zero-dimensional conductive properties, among which 18 are existing compounds that have not been pointed to as electrides. Our work reveals the rich abundance of inorganic electrides by providing 33 hitherto unexpected structure prototypes of electrides, of which 19 are not in the known structure databases.

Comparison of computer-assisted instruction (CAI) versus traditional textbook methods for training in abdominal examination (Japanese experience).

Science.gov (United States)

Qayumi, A K; Kurihara, Y; Imai, M; Pachev, G; Seo, H; Hoshino, Y; Cheifetz, R; Matsuura, K; Momoi, M; Saleem, M; Lara-Guerra, H; Miki, Y; Kariya, Y

2004-10-01

This study aimed to compare the effects of computer-assisted, text-based and computer-and-text learning conditions on the performances of 3 groups of medical students in the pre-clinical years of their programme, taking into account their academic achievement to date. A fourth group of students served as a control (no-study) group. Participants were recruited from the pre-clinical years of the training programmes in 2 medical schools in Japan, Jichi Medical School near Tokyo and Kochi Medical School near Osaka. Participants were randomly assigned to 4 learning conditions and tested before and after the study on their knowledge of and skill in performing an abdominal examination, in a multiple-choice test and an objective structured clinical examination (OSCE), respectively. Information about performance in the programme was collected from school records and students were classified as average, good or excellent. Student and faculty evaluations of their experience in the study were explored by means of a short evaluation survey. Compared to the control group, all 3 study groups exhibited significant gains in performance on knowledge and performance measures. For the knowledge measure, the gains of the computer-assisted and computer-assisted plus text-based learning groups were significantly greater than the gains of the text-based learning group. The performances of the 3 groups did not differ on the OSCE measure. Analyses of gains by performance level revealed that high achieving students' learning was independent of study method. Lower achieving students performed better after using computer-based learning methods. The results suggest that computer-assisted learning methods will be of greater help to students who do not find the traditional methods effective. Explorations of the factors behind this are a matter for future research.

An economic justification for open access to essential medicine patents in developing countries.

Science.gov (United States)

Flynn, Sean; Hollis, Aidan; Palmedo, Mike

2009-01-01

This paper offers an economic rationale for compulsory licensing of needed medicines in developing countries. The patent system is based on a trade-off between the "deadweight losses" caused by market power and the incentive to innovate created by increased profits from monopoly pricing during the period of the patent. However, markets for essential medicines under patent in developing countries with high income inequality are characterized by highly convex demand curves, producing large deadweight losses relative to potential profits when monopoly firms exercise profit-maximizing pricing strategies. As a result, these markets are systematically ill-suited to exclusive marketing rights, a problem which can be corrected through compulsory licensing. Open licenses that permit any qualified firm to supply the market on the same terms, such as may be available under licenses of right or essential facility legal standards, can be used to mitigate the negative effects of government-granted patents, thereby increasing overall social welfare.

In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice

Energy Technology Data Exchange (ETDEWEB)

Keriquel, Virginie; Guillemot, Fabien; Arnault, Isabelle; Guillotin, Bertrand; Amedee, Joelle; Fricain, Jean-Christophe; Catros, Sylvain [INSERM, U577, Bordeaux, F-33076 (France) and Universite Victor Segalen Bordeaux 2, UMR-S577 Bordeaux, F-33076 (France); Miraux, Sylvain [Centre de Resonance Magnetique des Systemes Biologiques, UMR 5536 (France)

2010-03-15

We present the first attempt to apply bioprinting technologies in the perspective of computer-assisted medical interventions. A workstation dedicated to high-throughput biological laser printing has been designed. Nano-hydroxyapatite (n-HA) was printed in the mouse calvaria defect model in vivo. Critical size bone defects were performed in OF-1 male mice calvaria with a 4 mm diameter trephine. Prior to laser printing experiments, the absence of inflammation due to laser irradiation onto mice dura mater was shown by means of magnetic resonance imaging. Procedures for in vivo bioprinting and results obtained using decalcified sections and x-ray microtomography are discussed. Although heterogeneous, these preliminary results demonstrate that in vivo bioprinting is possible. Bioprinting may prove to be helpful in the future for medical robotics and computer-assisted medical interventions.

In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice

International Nuclear Information System (INIS)

Keriquel, Virginie; Guillemot, Fabien; Arnault, Isabelle; Guillotin, Bertrand; Amedee, Joelle; Fricain, Jean-Christophe; Catros, Sylvain; Miraux, Sylvain

2010-01-01

We present the first attempt to apply bioprinting technologies in the perspective of computer-assisted medical interventions. A workstation dedicated to high-throughput biological laser printing has been designed. Nano-hydroxyapatite (n-HA) was printed in the mouse calvaria defect model in vivo. Critical size bone defects were performed in OF-1 male mice calvaria with a 4 mm diameter trephine. Prior to laser printing experiments, the absence of inflammation due to laser irradiation onto mice dura mater was shown by means of magnetic resonance imaging. Procedures for in vivo bioprinting and results obtained using decalcified sections and x-ray microtomography are discussed. Although heterogeneous, these preliminary results demonstrate that in vivo bioprinting is possible. Bioprinting may prove to be helpful in the future for medical robotics and computer-assisted medical interventions.

76 FR 75887 - SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's...

Science.gov (United States)

2011-12-05

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-P-0176] SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's Petition for... system (SEDASYS) submitted by Ethicon Endo-Surgery Inc. (EES), the sponsor for SEDASYS. This meeting has...

Evaluation of trade influence on economic growth rate by computational intelligence approach

Science.gov (United States)

Sokolov-Mladenović, Svetlana; Milovančević, Milos; Mladenović, Igor

2017-01-01

In this study was analyzed the influence of trade parameters on the economic growth forecasting accuracy. Computational intelligence method was used for the analyzing since the method can handle highly nonlinear data. It is known that the economic growth could be modeled based on the different trade parameters. In this study five input parameters were considered. These input parameters were: trade in services, exports of goods and services, imports of goods and services, trade and merchandise trade. All these parameters were calculated as added percentages in gross domestic product (GDP). The main goal was to select which parameters are the most impactful on the economic growth percentage. GDP was used as economic growth indicator. Results show that the imports of goods and services has the highest influence on the economic growth forecasting accuracy.

Total knee arthroplasty with computer-assisted navigation: an analysis of 200 cases,

Directory of Open Access Journals (Sweden)

Marcus Vinicius Malheiros Luzo

2014-04-01

Full Text Available OBJECTIVE: to evaluate the results from surgery with computer-assisted navigation in cases of total knee arthroplasty.METHOD: a total of 196 patients who underwent total knee arthroplasty with computer-assisted navigation were evaluated. The extension and flexion spaces (gaps were evaluated during the operation and the alignment after the operation was assessed. The Knee Society Score (KSS questionnaire for assessing patient's function was applied preoperatively and postoperatively after a mean follow-up of 22 months.RESULTS: in all, 86.7% of the patients presented good alignment of the mechanical axis (less than 3◦ of varus or valgus in relation to the mechanical axis and 96.4% of the patients presented balanced flexion and extension gaps. Before the operation, 97% of the patients presented poor or insufficient KSS, but after the operation, 77.6% presented good or excellent KSS.CONCLUSION: the navigation system made it possible to achieve aligned and balanced implants, with notable functional improvement among the patients. It was found to be useful in assessing, understanding and improving knowledge in relation to performing arthroplasty procedures.

Parametric sensitivity study for solar-assisted heat-pump systems

Science.gov (United States)

White, N. M.; Morehouse, J. H.

1981-07-01

The engineering and economic parameters affecting life-cycle costs for solar-assisted heat pump systems are investigted. The change in energy usage resulting from each engineering parameter varied was developed from computer simulations, and is compared with results from a stand-alone heat pump system. Three geographical locations are considered: Washington, DC, Fort Worth, TX, and Madison, WI. Results indicate that most engineering changes to the systems studied do not provide significant energy savings. The most promising parameters to ary are the solar collector parameters tau (-) and U/sub L/ the heat pump capacity at design point, and the minimum utilizable evaporator temperature. Costs associated with each change are estimated, and life-cycle costs computed for both engineering parameters and economic variations in interest rate, discount rate, tax credits, fuel unit costs and fuel inflation rates. Results indicate that none of the feasibile engineering changes for the system configuration studied will make these systems economically competitive with the stand-alone heat pump without a considerable tax credit.

A pharmacy student's role as a teaching assistant in an undergraduate medicinal chemistry course - Implementation, evaluation, and unexpected opportunities for educational outreach.

Science.gov (United States)

DellaVecchia, Matthew J; Claudio, Alyssa M; Fairclough, Jamie L

2017-11-01

To describe 1) a pharmacy student's teaching assistant (TA) role in an undergraduate medicinal chemistry course, 2) an active learning module co-developed by the TA and instructor, and 3) the unexpected opportunities for pharmacy educational outreach that resulted from this collaboration. Medicinal Chemistry (CHM3413) is an undergraduate course offered each fall at Palm Beach Atlantic University (PBA). As a TA for CHM3413, a pharmacy student from the Gregory School of Pharmacy (GSOP) at PBA co-developed and implemented an active learning module emphasizing foundational medicinal chemistry concepts as they pertain to performance enhancing drugs (PEDs). Surveys assessed undergraduate students' perceived knowledge of medicinal chemistry concepts, PEDs, and TA involvement. Students' (total n = 60, three fall semesters) perceived confidence in knowledge of medicinal chemistry concepts and PEDs increased significantly (p medicinal chemistry course. An advanced pharmacy practice experience elective in sports pharmacy (based on Ambrose's model) begins Fall 2017. Copyright © 2017 Elsevier Inc. All rights reserved.

Computed tomography, nuclear medicine, ultrasound. Advanced diagnostic imaging for problematic areas in paediatric otolaryngology

International Nuclear Information System (INIS)

Noyek, A.M.; Friedberg, J.; Fitz, C.R.; Greyson, N.D.; Gilday, D.; Ash, J.; Miskin, M.; Rothberg, R.

1982-01-01

This presentation considers the diagnostic role of three major advanced imaging modalities in paediatric otolaryngology: computed tomography, nuclear medicine and ultrasound. These techniques allow for both more specific diagnosis, and for more precise understanding of the natural history of diagnoses already rendered. (Auth.)

Neuroradiology computer-assisted instruction using interactive videodisk: Pilot project

International Nuclear Information System (INIS)

Andrews, C.L.; Goldsmith, D.G.; Osborn, A.G.; Stensaas, S.S.; Davidson, H.C.; Quigley, A.C.

1987-01-01

The availability of microcomputers, high-resolution monitors, high-level authoring languages, and videodisk technology make sophisticated neuroradiology instruction a cost-effective possibility. The authors developed a laser videodisk and interactive software to teach normal and pathologic gross and radiologic anatomy of the sellar/juxtasellar region. A spectrum of lesions is presented with information for differential diagnosis included. The exhibit permits conference participants to review the pilot module and experience the self-paced learning and self-evaluation possible with computer-assisted instruction. They also may choose to peruse a ''visual database'' by instant random access to the videodisk by hand control

Upgrading of analogue cameras using modern PC based computer

International Nuclear Information System (INIS)

Pardom, M.F.; Matos, L.

2002-01-01

Aim: The use of computers along with analogue cameras enables them to perform tasks involving time-activity parameters. The INFORMENU system converts a modern PC computer into a dedicated nuclear medicine computer system with a total cost affordable to emerging economic countries, and easily adaptable to all existing cameras. Materials and Methods: In collaboration with nuclear medicine physicians, an application including hardware and software was developed by a private firm. The system runs smoothly on Windows 98 and its operation is very easy. The main features are comparable to the brand commercial computer systems; such as image resolution until 1024 x 1024, low count loss at high count rate, uniformity correction, integrated graphical and text reporting, and user defined clinical protocols. Results: The system is used in more than 20 private and public institutions. The count loss is less than 1% in all the routine work, improvement of uniformity correction of 3-5 times, improved utility of the analogue cameras. Conclusion: The INFORMENU system improves the utility of analogue cameras permitting the inclusion of dynamic clinical protocols and quantifications, helping the development of the nuclear medicine practice. The operation and maintenance costs were lowered. The end users improve their knowledge of modern nuclear medicine

[Assisted reproductive medicine in Poland, 2011--SPiN PTG report].

Science.gov (United States)

Janicka, Anna; Spaczyński, Robert Z; Kurzawa, Rafał

2014-07-01

The aim of this report is to present data concerning results and complications related to infertility treatment using assisted reproductive technology (ART) and insemination (IUI) in Poland in 2011. The report was prepared by the Fertility and Sterility Special Interest Group of the Polish Gynaecological Society (SPiN PTG), based on individual data provided by fertility clinics in Poland. Reporting was voluntary and the provided data was not subject to external control. The report presents the availability and the structure of infertility treatment services, the number of procedures performed, their effectiveness and the most common complications. In 2013, 33 Polish fertility clinics provided information to the SPiN PTG report, presenting data from the year 2011. The total number of reported treatment cycles using ART was 15,340 (incl. 10,011 IVF/ICSI procedures) and 15,627 IUI procedures. The rate of clinical pregnancies in terms of a cycle was 34.2% in case of IVF/ ICSI procedures and 13.4% in case of IUI. The prevalence of multiple births was 20.2% and 8.3% respectively in case of IVF/ICSI and IUI methods. The most frequent complication in the course of treatment using ART was ovarian hyperstimulation syndrome (OHSS). The SPiN PTG report allows to find out the average effectiveness and safety of assisted reproduction technologies and is currently the only proof of responsibility and due diligence of fertility centres in Poland. However due to the lack of a central register of fertility clinics, facultative participation in the report as well as incomplete information on pregnancy and delivery the collected data does not reflect the full spectrum of the Polish reproductive medicine.

Photoshop® Assisted Spectroscopy: An Economical and Non-Destructive Method for Tracking Color Shift.

Science.gov (United States)

Wright, Kristi; Herro, Holly

Many historically and culturally significant objects from the mid-to-late 20 th century were created with media which contains light sensitive dyes that present problems for collection custodians and conservators. The conservation staff at the National Library of Medicine (NLM), National Institutes of Health, conducted a multi-phase project on the aging of ballpoint pen ink in a variety of enclosure types that ultimately culminated in the development of a new method to detect color shift in documents with light sensitive media. This article offers instructions on how to detect color shift in digitized materials using Photoshop® Assisted Spectroscopy.

Computational investigation of fluid flow and heat transfer of an economizer by porous medium approach

Science.gov (United States)

Babu, C. Rajesh; Kumar, P.; Rajamohan, G.

2017-07-01

Computation of fluid flow and heat transfer in an economizer is simulated by a porous medium approach, with plain tubes having a horizontal in-line arrangement and cross flow arrangement in a coal-fired thermal power plant. The economizer is a thermal mechanical device that captures waste heat from the thermal exhaust flue gasses through heat transfer surfaces to preheat boiler feed water. In order to evaluate the fluid flow and heat transfer on tubes, a numerical analysis on heat transfer performance is carried out on an 110 t/h MCR (Maximum continuous rating) boiler unit. In this study, thermal performance is investigated using the computational fluid dynamics (CFD) simulation using ANSYS FLUENT. The fouling factor ε and the overall heat transfer coefficient ψ are employed to evaluate the fluid flow and heat transfer. The model demands significant computational details for geometric modeling, grid generation, and numerical calculations to evaluate the thermal performance of an economizer. The simulation results show that the overall heat transfer coefficient 37.76 W/(m2K) and economizer coil side pressure drop of 0.2 (kg/cm2) are found to be conformity within the tolerable limits when compared with existing industrial economizer data.

Using Computer-Assisted Argumentation Mapping to develop effective argumentation skills in high school advanced placement physics

Science.gov (United States)

Heglund, Brian

Educators recognize the importance of reasoning ability for development of critical thinking skills, conceptual change, metacognition, and participation in 21st century society. There is a recognized need for students to improve their skills of argumentation, however, argumentation is not explicitly taught outside logic and philosophy---subjects that are not part of the K-12 curriculum. One potential way of supporting the development of argumentation skills in the K-12 context is through incorporating Computer-Assisted Argument Mapping to evaluate arguments. This quasi-experimental study tested the effects of such argument mapping software and was informed by the following two research questions: 1. To what extent does the collaborative use of Computer-Assisted Argumentation Mapping to evaluate competing theories influence the critical thinking skill of argument evaluation, metacognitive awareness, and conceptual knowledge acquisition in high school Advanced Placement physics, compared to the more traditional method of text tables that does not employ Computer-Assisted Argumentation Mapping? 2. What are the student perceptions of the pros and cons of argument evaluation in the high school Advanced Placement physics environment? This study examined changes in critical thinking skills, including argumentation evaluation skills, as well as metacognitive awareness and conceptual knowledge, in two groups: a treatment group using Computer-Assisted Argumentation Mapping to evaluate physics arguments, and a comparison group using text tables to evaluate physics arguments. Quantitative and qualitative methods for collecting and analyzing data were used to answer the research questions. Quantitative data indicated no significant difference between the experimental groups, and qualitative data suggested students perceived pros and cons of argument evaluation in the high school Advanced Placement physics environment, such as self-reported sense of improvement in argument

Computer assisted surgery with 3D robot models and visualisation of the telesurgical action.

Science.gov (United States)

Rovetta, A

2000-01-01

This paper deals with the support of virtual reality computer action in the procedures of surgical robotics. Computer support gives a direct representation of the surgical theatre. The modelization of the procedure in course and in development gives a psychological reaction towards safety and reliability. Robots similar to the ones used by the manufacturing industry can be used with little modification as very effective surgical tools. They have high precision, repeatability and are versatile in integrating with the medical instrumentation. Now integrated surgical rooms, with computer and robot-assisted intervention, are operating. The computer is the element for a decision taking aid, and the robot works as a very effective tool.

Bulletin bibliographique sur l'E.A.O. (l'enseignement assiste par ordinateur) (Bibliographic Bulletin on Computer Assisted Instruction). Publication K-4.

Science.gov (United States)

LaForge, Lorne, Ed.

The bibliography contains about 150 citations of journal articles, monographs, collected works, research reports, and essays drawn from the BIBELO database and concerning computer-assisted language instruction. The first half of the volume is an annotated bibliography in alphabetical order by author. The second section contains subject and…

Workshop on Computational Optimization

CERN Document Server

2015-01-01

Our everyday life is unthinkable without optimization. We try to minimize our effort and to maximize the achieved profit. Many real world and industrial problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks. This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2013. It presents recent advances in computational optimization. The volume includes important real life problems like parameter settings for controlling processes in bioreactor, resource constrained project scheduling, problems arising in transport services, error correcting codes, optimal system performance and energy consumption and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others.

COMPUTER-ASSISTED SEMEN ANALYSIS OF RAT SPERMATOZOA AFTER AN INTRAPERITONEAL ADMINISTRATION OF INSECTICIDE DIAZINON

Directory of Open Access Journals (Sweden)

R. TOMAN

2008-05-01

Full Text Available The aim of this study was to reveal the effect of diazinon on the rat spermatozoa motility characteristics using the computer-assisted semen analysis (CASA. Motility, progressive motility, DAP, DCL, DSL, VAP, VCL, VSL, STR, LIN, WOB, ALH, and BCF after the diazinon i.p. administration of 20 mg/kg b.w. were evaluated. 36 hours after the diazinon administration, only slight decrease in VCL, DCL and increase in percentage of progressive motility in the diazinon-treated group. Significant decrease (P<0.01 was only observed in BCF in diazinon-treated group. Computer-assisted semen analysis (CASA of rat sperm motility showed that acute diazinon administration slightly affected the rat sperm motility which can be the first step in the decreased fertilization capacity caused by pesticides. Further investigation of reproductive effects of diazinon is needed.

Computer programs for capital cost estimation, lifetime economic performance simulation, and computation of cost indexes for laser fusion and other advanced technology facilities

International Nuclear Information System (INIS)

Pendergrass, J.H.

1978-01-01

Three FORTRAN programs, CAPITAL, VENTURE, and INDEXER, have been developed to automate computations used in assessing the economic viability of proposed or conceptual laser fusion and other advanced-technology facilities, as well as conventional projects. The types of calculations performed by these programs are, respectively, capital cost estimation, lifetime economic performance simulation, and computation of cost indexes. The codes permit these three topics to be addressed with considerable sophistication commensurate with user requirements and available data

A review on economic emission dispatch problems using quantum computational intelligence

Science.gov (United States)

Mahdi, Fahad Parvez; Vasant, Pandian; Kallimani, Vish; Abdullah-Al-Wadud, M.

2016-11-01

Economic emission dispatch (EED) problems are one of the most crucial problems in power systems. Growing energy demand, limitation of natural resources and global warming make this topic into the center of discussion and research. This paper reviews the use of Quantum Computational Intelligence (QCI) in solving Economic Emission Dispatch problems. QCI techniques like Quantum Genetic Algorithm (QGA) and Quantum Particle Swarm Optimization (QPSO) algorithm are discussed here. This paper will encourage the researcher to use more QCI based algorithm to get better optimal result for solving EED problems.

Artroplastia total do joelho assistida por computador Computer-assisted knee total arthroplasty

Directory of Open Access Journals (Sweden)

Roberto Freire da Mota e Albuquerque

2006-01-01

Full Text Available Um dos avanços tecnológicos mais significativos da medicina atual é a cirurgia assistida por computador, sendo que na ortopedia uma das aplicações mais importantes dessa tecnologia é na artroplastia do joelho. A principal contribuição da cirurgia ortopédica assistida por computador (Computer Aided Orthopaedic Surgery’s - CAOS na artroplastia do joelho é o seu potencial em aprimorar a precisão da implantação das próteses e do alinhamento do membro operado contribuindo para a otimização e longevidade dos resultados. A navegação independente de imagens, baseada em referências anatômicas adquiridas durante o ato cirúrgico através de transmissores de raios infra-vermelho, tem sido a técnica preponderante na artroplastia do joelho. Utilizamos o sistema de navegação para artroplastia total do joelho "OrthoPilot" versão 2.2 para a colocação de 72 próteses de joelho "Search Evolution" da "Aesculap AG CO. KG" com ou sem estabilização posterior em uma série contínua. O objetivo foi aferir a precisão do alinhamento obtido com a navegação através de radiografias panorâmicas obtidas no período pós-operatório. Obtivemos um desvio médio do eixo mecânico nulo de 0,66º com desvio padrão de 0,7º, sendo que 98,6% dos joelhos ficaram dentro de uma margem de erro de 3º e 79,2% com erro inferior a 1º. Concluímos que o sistema é seguro e preciso, não adicionando morbidade à cirurgia convencional.One of the most significant technological advancements in current medicine is the computer-assisted surgery, which, for orthopaedics, one of the major uses of this technology is in knee arthroplasty. The main contribution provided by computer-assisted orthopaedic surgery (CAOS to knee arthroplasty is its potential to improve prosthesis implant precision and the operated limb alignment, contributing to results optimization and longevity. The image-independent navigation, based on anatomical references acquired during surgical

Development of a Computer-Assisted Instrumentation Curriculum for Physics Students: Using LabVIEW and Arduino Platform

Science.gov (United States)

Kuan, Wen-Hsuan; Tseng, Chi-Hung; Chen, Sufen; Wong, Ching-Chang

2016-01-01

We propose an integrated curriculum to establish essential abilities of computer programming for the freshmen of a physics department. The implementation of the graphical-based interfaces from Scratch to LabVIEW then to LabVIEW for Arduino in the curriculum "Computer-Assisted Instrumentation in the Design of Physics Laboratories" brings…

OBJECTIVE EVALUATION OF HYPERACTIVATED MOTILITY IN RAT SPERMATOZA USING COMPUTER-ASSISTED SPERM ANALYSIS (CASA)

Science.gov (United States)

Objective evaluation of hyperactivated motility in rat spermatozoa using computer-assisted sperm analysis.Cancel AM, Lobdell D, Mendola P, Perreault SD.Toxicology Program, University of North Carolina, Chapel Hill, NC 27599, USA.The aim of this study was t...

Information security: where computer science, economics and psychology meet.

Science.gov (United States)

Anderson, Ross; Moore, Tyler

2009-07-13

Until ca. 2000, information security was seen as a technological discipline, based on computer science but with mathematics helping in the design of ciphers and protocols. That perspective started to change as researchers and practitioners realized the importance of economics. As distributed systems are increasingly composed of machines that belong to principals with divergent interests, incentives are becoming as important to dependability as technical design. A thriving new field of information security economics provides valuable insights not just into 'security' topics such as privacy, bugs, spam and phishing, but into more general areas of system dependability and policy. This research programme has recently started to interact with psychology. One thread is in response to phishing, the most rapidly growing form of online crime, in which fraudsters trick people into giving their credentials to bogus websites; a second is through the increasing importance of security usability; and a third comes through the psychology-and-economics tradition. The promise of this multidisciplinary research programme is a novel framework for analysing information security problems-one that is both principled and effective.

Is computer-assisted instruction more effective than other educational methods in achieving ECG competence among medical students and residents? Protocol for a systematic review and meta-analysis.

Science.gov (United States)

Viljoen, Charle André; Scott Millar, Rob; Engel, Mark E; Shelton, Mary; Burch, Vanessa

2017-12-26

Although ECG interpretation is an essential skill in clinical medicine, medical students and residents often lack ECG competence. Novel teaching methods are increasingly being implemented and investigated to improve ECG training. Computer-assisted instruction is one such method under investigation; however, its efficacy in achieving better ECG competence among medical students and residents remains uncertain. This article describes the protocol for a systematic review and meta-analysis that will compare the effectiveness of computer-assisted instruction with other teaching methods used for the ECG training of medical students and residents. Only studies with a comparative research design will be considered. Articles will be searched for in electronic databases (PubMed, Scopus, Web of Science, Academic Search Premier, CINAHL, PsycINFO, Education Resources Information Center, Africa-Wide Information and Teacher Reference Center). In addition, we will review citation indexes and conduct a grey literature search. Data extraction will be done on articles that met the predefined eligibility criteria. A descriptive analysis of the different teaching modalities will be provided and their educational impact will be assessed in terms of effect size and the modified version of Kirkpatrick framework for the evaluation of educational interventions. This systematic review aims to provide evidence as to whether computer-assisted instruction is an effective teaching modality for ECG training. It is hoped that the information garnered from this systematic review will assist in future curricular development and improve ECG training. As this research is a systematic review of published literature, ethical approval is not required. The results will be reported according to the Preferred Reporting Items for Systematic Review and Meta-Analysis statement and will be submitted to a peer-reviewed journal. The protocol and systematic review will be included in a PhD dissertation. CRD

Computer-assisted radiological quantification of rheumatoid arthritis

International Nuclear Information System (INIS)

Peloschek, P.L.

2000-03-01

Specific objective was to develop the layout and structure of a platform for effective quantification of rheumatoid arthritis (RA). A fully operative Java stand-alone application software (RheumaCoach) was developed to support the efficacy of the scoring process in RA (Web address: http://www.univie.ac.at/radio/radio.htm). Addressed as potential users of such a program are physicians enrolled in clinical trials to evaluate the course of RA and its modulation with drug therapies and scientists developing new scoring modalities. The software 'RheumaCoach' consists of three major modules: The Tutorial starts with 'Rheumatoid Arthritis', to teach the basic pathology of the disease. Afterwards the section 'Imaging Standards' explains how to produce proper radiographs. 'Principles - How to use the 'Larsen Score', 'Radiographic Findings' and 'Quantification by Scoring' explain the requirements for unbiased scoring of RA. At the Data Input Sheet care was taken to follow the radiologist's approach in analysing films as published previously. At the compute sheet the calculated Larsen-Score may be compared with former scores and the further possibilities (calculate, export, print, send) are easily accessible. In a first pre-clinical study the system was tested in an unstructured. Two structured evaluations (30 fully documented and blinded cases of RA, four radiologists scored hands and feet with or without the RheumaCoach) followed. Between the evaluations we permanently improved the software. For all readers the usage of the RheumaCoach fastened the procedure, all together the scoring without computer-assistance needed about 20 % percent more time. Availability of the programme via the internet provides common access for potential quality control in multi-center studies. Documentation of results in a specifically designed printout improves communication between radiologists and rheumatologists. The possibilities of direct export to other programmes and electronic

Intelligent databases assist transparent and sound economic valuation of ecosystem services.

Science.gov (United States)

Villa, Ferdinando; Ceroni, Marta; Krivov, Sergey

2007-06-01

Assessment and economic valuation of services provided by ecosystems to humans has become a crucial phase in environmental management and policy-making. As primary valuation studies are out of the reach of many institutions, secondary valuation or benefit transfer, where the results of previous studies are transferred to the geographical, environmental, social, and economic context of interest, is becoming increasingly common. This has brought to light the importance of environmental valuation databases, which provide reliable valuation data to inform secondary valuation with enough detail to enable the transfer of values across contexts. This paper describes the role of next-generation, intelligent databases (IDBs) in assisting the activity of valuation. Such databases employ artificial intelligence to inform the transfer of values across contexts, enforcing comparability of values and allowing users to generate custom valuation portfolios that synthesize previous studies and provide aggregated value estimates to use as a base for secondary valuation. After a general introduction, we introduce the Ecosystem Services Database, the first IDB for environmental valuation to be made available to the public, describe its functionalities and the lessons learned from its usage, and outline the remaining needs and expected future developments in the field.

Computer-aided-design-model-assisted absolute three-dimensional shape measurement.

Science.gov (United States)

Li, Beiwen; Bell, Tyler; Zhang, Song

2017-08-20

Conventional three-dimensional (3D) shape measurement methods are typically generic to all types of objects. Yet, for many measurement conditions, such a level of generality is inessential when having the preknowledge of the object geometry. This paper introduces a novel adaptive algorithm for absolute 3D shape measurement with the assistance of the object computer-aided-design (CAD) model. The proposed algorithm includes the following major steps: (1) export the 3D point cloud data from the CAD model; (2) transform the CAD model into the camera perspective; (3) obtain a wrapped phase map from three phase-shifted fringe images; and (4) retrieve absolute phase and 3D geometry assisted by the CAD model. We demonstrate that if object CAD models are available, such an algorithm is efficient in recovering absolute 3D geometries of both simple and complex objects with only three phase-shifted fringe images.

Using computer-aided drug design and medicinal chemistry strategies in the fight against diabetes.

Science.gov (United States)

Semighini, Evandro P; Resende, Jonathan A; de Andrade, Peterson; Morais, Pedro A B; Carvalho, Ivone; Taft, Carlton A; Silva, Carlos H T P

2011-04-01

The aim of this work is to present a simple, practical and efficient protocol for drug design, in particular Diabetes, which includes selection of the illness, good choice of a target as well as a bioactive ligand and then usage of various computer aided drug design and medicinal chemistry tools to design novel potential drug candidates in different diseases. We have selected the validated target dipeptidyl peptidase IV (DPP-IV), whose inhibition contributes to reduce glucose levels in type 2 diabetes patients. The most active inhibitor with complex X-ray structure reported was initially extracted from the BindingDB database. By using molecular modification strategies widely used in medicinal chemistry, besides current state-of-the-art tools in drug design (including flexible docking, virtual screening, molecular interaction fields, molecular dynamics, ADME and toxicity predictions), we have proposed 4 novel potential DPP-IV inhibitors with drug properties for Diabetes control, which have been supported and validated by all the computational tools used herewith.

Algerian EFL University Teachers' Attitudes towards Computer Assisted Language Learning: The Case of Djilali Liabes University

Science.gov (United States)

Bouchefra, Miloud; Baghoussi, Meriem

2017-01-01

Computer Assisted Language Learning (CALL) is still groping its way into Algerian English as a Foreign Language (EFL) classroom, where Information Communications Technologies (ICTs) are defined in terms of occasional use of computers and data projectors for material presentation in the classroom. Though major issues in the image of the lack of…

Identification and conservation of important plant areas (IPAS) for the distribution of medicinal, aromatic and economic plants in the Hindukush-Himalaya mountain range

International Nuclear Information System (INIS)

Sher, H.; Ali, H.; Rehman, S.

2012-01-01

Study on the identification of Important Plant Areas (IPAs) was conducted in seven valleys of Hindukush-Himalayas mountainous ranges of Pakistan during 2005 and 2006. The principal aim of the study is to search new avenues for the conservation and sustainable utilization of threatened medicinal and economic plants and their habitats in IPAs. IPAs are sites of tremendous ecological and economic values that still exist in the world and are being managed on specific sites to study wild plant diversity. Several of such plants are used in the traditional medicines that are being used since the dawn of history to provide basic healthcare to people the world over. According to WHO, 80% of the human population of Africa still use medicinal plants in their primary healthcare. The popularity of herbal drugs is on the constant rise in many developed countries of the world, while in developing countries like Pakistan; medicinal plants contribute significantly to the income sources of people living in remote areas. Keeping such importance in view, the World Health Organization (WHO) launched a global vision in the form of 'Global Strategy for Plant Conservation' having various targets and mile stones. Target 5 of the strategy required for the global integration of the herbal medicine in health care system with proper identification of medicinal plants and the conservation of sites where such plants are found naturally, as its basic elements. In order to contribute to the specified target, WHO advised the relevant institutions to develop research plans and conservation programmes that are focused on the Global strategy in general and target 5 in specific. While complementing the appeal and contributing to its vision, a study was conducted in various eco-systems of the Pakistan's Hindukush-Himalayas region, identifying Important Plant Areas (IPAs) for their subsequent conservation and uses for scientific purposes. Site selection for the study was based on: 1). Exceptional

An economic optimization of evaporator and air collector area in a solar assisted heat pump drying system

International Nuclear Information System (INIS)

Rahman, S.M.A.; Saidur, R.; Hawlader, M.N.A.

2013-01-01

Highlights: • The optimum combination will provide around 89% of the total load. • The system has a savings during the life cycle with least payback period of 4.37 year. • The optimal system is insensitive to the variation in fuel inflation and discount rate. - Abstract: This paper presents an economic optimization of evaporator and air collector area of a solar assisted heat pump drying system. Economic viability of solar heating systems is usually made by comparing the cost flows recurring throughout the lifetime of the solar and conventional alternative systems. Therefore, identification of optimum variables by using a simulation program and an economic analysis based on payback period of the system are presented in this paper. FORTRAN language is used to run the simulation. Effect of load and different economic variables on payback period is also investigated. Economic analysis reveals that system has sufficient amount of savings during the life cycle with a minimum payback period of about 4 years

Computer-assisted assessment of ultrasound real-time elastography: initial experience in 145 breast lesions.

Science.gov (United States)

Zhang, Xue; Xiao, Yang; Zeng, Jie; Qiu, Weibao; Qian, Ming; Wang, Congzhi; Zheng, Rongqin; Zheng, Hairong

2014-01-01

To develop and evaluate a computer-assisted method of quantifying five-point elasticity scoring system based on ultrasound real-time elastography (RTE), for classifying benign and malignant breast lesions, with pathologic results as the reference standard. Conventional ultrasonography (US) and RTE images of 145 breast lesions (67 malignant, 78 benign) were performed in this study. Each lesion was automatically contoured on the B-mode image by the level set method and mapped on the RTE image. The relative elasticity value of each pixel was reconstructed and classified into hard or soft by the fuzzy c-means clustering method. According to the hardness degree inside lesion and its surrounding tissue, the elasticity score of the RTE image was computed in an automatic way. Visual assessments of the radiologists were used for comparing the diagnostic performance. Histopathologic examination was used as the reference standard. The Student's t test and receiver operating characteristic (ROC) curve analysis were performed for statistical analysis. Considering score 4 or higher as test positive for malignancy, the diagnostic accuracy, sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) were 93.8% (136/145), 92.5% (62/67), 94.9% (74/78), 93.9% (62/66), and 93.7% (74/79) for the computer-assisted scheme, and 89.7% (130/145), 85.1% (57/67), 93.6% (73/78), 92.0% (57/62), and 88.0% (73/83) for manual assessment. Area under ROC curve (Az value) for the proposed method was higher than the Az value for visual assessment (0.96 vs. 0.93). Computer-assisted quantification of classical five-point scoring system can significantly eliminate the interobserver variability and thereby improve the diagnostic confidence of classifying the breast lesions to avoid unnecessary biopsy. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Computer-assisted assessment of ultrasound real-time elastography: Initial experience in 145 breast lesions

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xue; Xiao, Yang [Shenzhen Key Lab for Molecular Imaging, Paul C. Lauterbur Research Center for Biomedical Imaging, Institute of Biomedical and Health Engineering, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen (China); Zeng, Jie [Department of Medical Ultrasonics, Third Affiliated Hospital of Sun Yat-Sen University, Guangzhou (China); Qiu, Weibao; Qian, Ming; Wang, Congzhi [Shenzhen Key Lab for Molecular Imaging, Paul C. Lauterbur Research Center for Biomedical Imaging, Institute of Biomedical and Health Engineering, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen (China); Zheng, Rongqin, E-mail: zhengronggin@hotmail.com [Department of Medical Ultrasonics, Third Affiliated Hospital of Sun Yat-Sen University, Guangzhou (China); Zheng, Hairong, E-mail: hr.zheng@siat.ac.cn [Shenzhen Key Lab for Molecular Imaging, Paul C. Lauterbur Research Center for Biomedical Imaging, Institute of Biomedical and Health Engineering, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen (China)

2014-01-15

Purpose: To develop and evaluate a computer-assisted method of quantifying five-point elasticity scoring system based on ultrasound real-time elastography (RTE), for classifying benign and malignant breast lesions, with pathologic results as the reference standard. Materials and methods: Conventional ultrasonography (US) and RTE images of 145 breast lesions (67 malignant, 78 benign) were performed in this study. Each lesion was automatically contoured on the B-mode image by the level set method and mapped on the RTE image. The relative elasticity value of each pixel was reconstructed and classified into hard or soft by the fuzzy c-means clustering method. According to the hardness degree inside lesion and its surrounding tissue, the elasticity score of the RTE image was computed in an automatic way. Visual assessments of the radiologists were used for comparing the diagnostic performance. Histopathologic examination was used as the reference standard. The Student's t test and receiver operating characteristic (ROC) curve analysis were performed for statistical analysis. Results: Considering score 4 or higher as test positive for malignancy, the diagnostic accuracy, sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) were 93.8% (136/145), 92.5% (62/67), 94.9% (74/78), 93.9% (62/66), and 93.7% (74/79) for the computer-assisted scheme, and 89.7% (130/145), 85.1% (57/67), 93.6% (73/78), 92.0% (57/62), and 88.0% (73/83) for manual assessment. Area under ROC curve (A{sub z} value) for the proposed method was higher than the A{sub z} value for visual assessment (0.96 vs. 0.93). Conclusion: Computer-assisted quantification of classical five-point scoring system can significantly eliminate the interobserver variability and thereby improve the diagnostic confidence of classifying the breast lesions to avoid unnecessary biopsy.

Use of inpatient continuous passive motion versus no CPM in computer-assisted total knee arthroplasty.

Science.gov (United States)

Alkire, Martha R; Swank, Michael L

2010-01-01

Continuous passive motion (CPM) has shown positive effects on tissue healing, edema, hemarthrosis, and joint function (L. Brosseau et al., 2004). CPM has also been shown to increase short-term early flexion and decrease length of stay (LOS) ( L. Brosseau et al., 2004; C. M. Chiarello, C. M. S. Gundersen, & T. O'Halloran, 2004). The benefits of CPM for the population of patients undergoing computer-assisted total knee arthroplasty (TKA) have not been examined. The primary objective of this study was to determine whether the use of CPM following computer-assisted TKA resulted in differences in range of motion, edema/drainage, functional ability, and pain. This was an experimental, prospective, randomized study of patients undergoing unilateral, computer-assisted TKA. The experimental group received CPM thrice daily and physical therapy (PT) twice daily during their hospitalization. The control group received PT twice daily and no CPM during the hospital stay. Both groups received PT after discharge. Measurement included Knee Society scores, Western Ontario McMaster Osteoarthritis Index values, range of motion, knee circumference, and HemoVac drainage. Data were collected at various intervals from preoperatively through 3 months. Although the control group was found to be higher functioning preoperatively, there was no statistically significant difference in flexion, edema or drainage, function, or pain between groups through the 3-month study period.

Some computer applications and digital image processing in nuclear medicine

International Nuclear Information System (INIS)

Lowinger, T.

1981-01-01

Methods of digital image processing are applied to problems in nuclear medicine imaging. The symmetry properties of central nervous system lesions are exploited in an attempt to determine the three-dimensional radioisotope density distribution within the lesions. An algorithm developed by astronomers at the end of the 19th century to determine the distribution of matter in globular clusters is applied to tumors. This algorithm permits the emission-computed-tomographic reconstruction of spherical lesions from a single view. The three-dimensional radioisotope distribution derived by the application of the algorithm can be used to characterize the lesions. The applicability to nuclear medicine images of ten edge detection methods in general usage in digital image processing were evaluated. A general model of image formation by scintillation cameras is developed. The model assumes that objects to be imaged are composed of a finite set of points. The validity of the model has been verified by its ability to duplicate experimental results. Practical applications of this work involve quantitative assessment of the distribution of radipharmaceuticals under clinical situations and the study of image processing algorithms

Computer Assisted Instruction (Cain) For Nuclear Magnetic Resonance Spectroscopy

International Nuclear Information System (INIS)

Jaturonrusmee, Wasna; Arthonvorakul, Areerat; Assateranuwat, Adisorn

2005-10-01

A computer assisted instruction program for nuclear magnetic resonance spectroscopy was developed by using Author ware 5.0, Adobe Image Styler 1.0, Adobe Photo shop 7.0 and Flash MX. The contents included the basic theory of 1H and 13C nuclear magnetic resonance (NMR) spectroscopy, the instrumentation of NMR spectroscopy, the two dimensional (2D) NMR spectroscopy and the interpretation of NMR spectra. The program was also provided examples, and exercises, with emphasis on NMR spectra interpretation to determine the structure of unknown compounds and solutions for self study. The questionnaire from students showed that they were very satisfied with the software

Economic evaluation for first-line anti-hypertensive medicines: applications for the Philippines

Directory of Open Access Journals (Sweden)

Geroy Lester Sam Araneta

2012-12-01

Full Text Available Abstract Background Medicines to control hypertension, a leading cause of morbidity and mortality, are a major component of health expenditures in the Philippines. This study aims to review economic studies for first line anti-hypertensive medical treatment without co-morbidities; and discuss practical, informational and policy implications on the use of economic evaluation in the Philippines. Methods A systematic literature review was performed using the following databases: MEDLINE, EMBASE, BIOSIS, PubMed, The Cochrane Library, Health Economics Evaluations Database (HEED and the Centre for Reviews and Dissemination – NHS NICE. Six existing economic analytical frameworks were reviewed and one framework for critical appraisal was developed. Results Out of 1336 searched articles, 12 fulfilled the inclusion criteria. The studies were summarized according to their background characteristics (year, journal, intervention and comparators, objective/study question, target audience, economic study type, study population, setting and country and source of funding/conflict of interest and technical characteristics (perspective, time horizon, methodology/modeling, search strategy for parameters, costs, effectiveness measures, discounting, assumptions and biases, results, cost-effectiveness ratio, endpoints, sensitivity analysis, generalizability, strengths and limitations, conclusions, implications and feasibility and recommendations. The studies represented different countries, perspectives and stakeholders. Conclusions Diuretics were the most cost-effective drug class for first-line treatment of hypertension without co-morbidities. Although the Philippine Health Insurance Corporation may apply the recommendations given in previous studies (i.e. to subsidize diuretics, ACE inhibitors and calcium channel blockers, it is uncertain how much public funding is justified. There is an information gap on clinical data (transition probabilities, relative risks

Artificial intelligence. Application of the Statistical Neural Networks computer program in nuclear medicine

International Nuclear Information System (INIS)

Stefaniak, B.; Cholewinski, W.; Tarkowska, A.

2005-01-01

Artificial Neural Networks (ANN) may be a tool alternative and complementary to typical statistical analysis. However, in spite of many computer application of various ANN algorithms ready for use, artificial intelligence is relatively rarely applied to data processing. In this paper practical aspects of scientific application of ANN in medicine using the Statistical Neural Networks Computer program, were presented. Several steps of data analysis with the above ANN software package were discussed shortly, from material selection and its dividing into groups to the types of obtained results. The typical problems connected with assessing scintigrams by ANN were also described. (author)

A computer assisted toolholder to guide surgery in stereotactic space.

Science.gov (United States)

Giorgi, C; Pluchino, F; Luzzara, M; Ongania, E; Casolino, D S

1994-01-01

A computer assisted toolholder, integrated with an anatomical graphic 3-D rendering programme, is presented. Stereotactic neuroanatomical images are acquired, and the same reference system is employed to represent the position of the toolholder on the monitor. The surgeon can check the orientation of different approach trajectories, moving the toolholder in a situation of virtual reality. Angular values expressed by high precision encoders on the five joints of the toolholder modify "on line" the representation of the configuration of the toolholder within the three dimensional representation of the patient's anatomy.

Listening Strategy Use and Influential Factors in Web-Based Computer Assisted Language Learning

Science.gov (United States)

Chen, L.; Zhang, R.; Liu, C.

2014-01-01

This study investigates second and foreign language (L2) learners' listening strategy use and factors that influence their strategy use in a Web-based computer assisted language learning (CALL) system. A strategy inventory, a factor questionnaire and a standardized listening test were used to collect data from a group of 82 Chinese students…

The Use of Computer-Assisted Home Exercises to Preserve Physical Function after a Vestibular Rehabilitation Program: A Randomized Controlled Study

DEFF Research Database (Denmark)

Brandt, Michael Smærup; Læssøe, Uffe; Grönvall, Erik

2016-01-01

. Materials and Methods. Single-blind, randomized, controlled follow-up study. Fifty-seven elderly patients with chronic dizziness were randomly assigned to a computer-assisted home exercise program or to home exercises as described in printed instructions and followed for tree month after discharge from......, and quality of life three months following discharge from hospital. In this specific setup, no greater effect was found by introducing a computer-assisted training program, when compared to standard home training guided by printed instructions. This trial is registered with NCT01344408.......Objective. The purpose of this study was to evaluate whether elderly patients with vestibular dysfunction are able to preserve physical functional level, reduction in dizziness, and the patient's quality of life when assistive computer technology is used in comparison with printed instructions...

Finding Resolution for the Responsible Transparency of Economic Models in Health and Medicine.

Science.gov (United States)

Padula, William V; McQueen, Robert Brett; Pronovost, Peter J

2017-11-01

The Second Panel on Cost-Effectiveness in Health and Medicine recommendations for conduct, methodological practices, and reporting of cost-effectiveness analyses has a number of questions unanswered with respect to the implementation of transparent, open source code interface for economic models. The possibility of making economic model source code could be positive and progressive for the field; however, several unintended consequences of this system should be first considered before complete implementation of this model. First, there is the concern regarding intellectual property rights that modelers have to their analyses. Second, the open source code could make analyses more accessible to inexperienced modelers, leading to inaccurate or misinterpreted results. We propose several resolutions to these concerns. The field should establish a licensing system of open source code such that the model originators maintain control of the code use and grant permissions to other investigators who wish to use it. The field should also be more forthcoming towards the teaching of cost-effectiveness analysis in medical and health services education so that providers and other professionals are familiar with economic modeling and able to conduct analyses with open source code. These types of unintended consequences need to be fully considered before the field's preparedness to move forward into an era of model transparency with open source code.

Attitudes of Jordanian Undergraduate Students towards Using Computer Assisted Language Learning (CALL

Directory of Open Access Journals (Sweden)

Farah Jamal Abed Alrazeq Saeed

2018-01-01

Full Text Available The study aimed at investigating the attitudes of Jordanian undergraduate students towards using computer assisted -language learning (CALL and its effectiveness in the process of learning the English language.  In order to fulfill the study’s objective, the researchers used a questionnaire to collect data, followed-up with semi-structured interviews to investigate the students’ beliefs towards CALL. Twenty- one of Jordanian BA students majoring in English language and literature were selected according to simple random sampling. The results revealed positive attitudes towards CALL in facilitating the process of writing assignments, gaining information; making learning enjoyable; improving their creativity, productivity, academic achievement, critical thinking skills, and enhancing their knowledge about vocabulary grammar, and culture. Furthermore, they believed that computers can motivate them to learn English language and help them to communicate and interact with their teachers and colleagues. The researchers recommended conducting a research on the same topic, taking into consideration the variables of age, gender, experience in using computers, and computer skills.

Validation of a novel computer-assisted sperm analysis (CASA) system using multitarget-tracking algorithms.

Science.gov (United States)

Tomlinson, Mathew James; Pooley, Karen; Simpson, Tracey; Newton, Thomas; Hopkisson, James; Jayaprakasan, Kannamanadias; Jayaprakasan, Rajisha; Naeem, Asad; Pridmore, Tony

2010-04-01

To determine the accuracy and precision of a novel computer-assisted sperm analysis (CASA) system by comparison with existing recommended manual methods. Prospective study using comparative measurements of sperm concentration and motility on latex beads and immotile and motile sperm. Tertiary referral fertility center with strong academic links. Sperm donors and male partners of couples attending for fertility investigations. None. Achievement of Accubead target value for high and low concentration suspensions. Repeatability as demonstrated by coefficients of variation and intraclass correlation coefficients. Correlation and limits of agreement between CASA and manual methods. The CASA measurements of latex beads and sperm concentrations demonstrated a high level of accuracy and repeatability. Repeated Accubead measurements attained the required target value (mean difference from target of 2.61% and 3.71% for high- and low-concentration suspensions, respectively) and were highly reproducible. Limits of agreement analysis suggested that manual and CASA counts compared directly could be deemed to be interchangeable. Manual and CASA motility measurements were highly correlated for grades a, b, and d but could not be deemed to be interchangeable, and manual motility estimates were consistently higher for motile sperm. The novel CASA system was able to provide semen quality measurements for sperm concentration and motility measurements which were at least as reliable as current manual methods. Copyright 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Computer utilization for the solution of gas supply problems

Energy Technology Data Exchange (ETDEWEB)

Raleigh, J T; Brady, J R

1968-01-01

The computer programs in this paper have proven to be useful tools in the solution of gas supply problems. Some of the management type of applications are: (1) long range planning projects; (2) comparison of various proposed gas purchase contracts; (3) to assist with budget and operational planning; (4) to assist in making cost-of-servic and rate predictions; (5) to investigate the feasibility of processing plants at any point on the system; and (6) to assist dispatching in its daily operation for cost and quality control. Competition, not only from the gas industry, but also from other forms of energy, makes it imperative that quantitative and economic information with regard to that marketable resource be available under a variety of assumptions and alternatives. This information can best be made available in a timely manner by the use of the computer.

The Computer Book of the Internal Medicine Resident: competence acquisition and achievement of learning objectives.

Science.gov (United States)

Oristrell, J; Oliva, J C; Casanovas, A; Comet, R; Jordana, R; Navarro, M

2014-01-01

The Computer Book of the Internal Medicine resident (CBIMR) is a computer program that was validated to analyze the acquisition of competences in teams of Internal Medicine residents. To analyze the characteristics of the rotations during the Internal Medicine residency and to identify the variables associated with the acquisition of clinical and communication skills, the achievement of learning objectives and resident satisfaction. All residents of our service (n=20) participated in the study during a period of 40 months. The CBIMR consisted of 22 self-assessment questionnaires specific for each rotation, with items on services (clinical workload, disease protocolization, resident responsibilities, learning environment, service organization and teamwork) and items on educational outcomes (acquisition of clinical and communication skills, achievement of learning objectives, overall satisfaction). Associations between services features and learning outcomes were analyzed using bivariate and multivariate analysis. An intense clinical workload, high resident responsibilities and disease protocolization were associated with the acquisition of clinical skills. High clinical competence and teamwork were both associated with better communication skills. Finally, an adequate learning environment was associated with increased clinical competence, the achievement of educational goals and resident satisfaction. Potentially modifiable variables related with the operation of clinical services had a significant impact on the acquisition of clinical and communication skills, the achievement of educational goals, and resident satisfaction during the specialized training in Internal Medicine. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Alkaloid profiling of the Chinese herbal medicine Fuzi by combination of matrix-assisted laser desorption ionization mass spectrometry with liquid chromatography-mass spectrometry

NARCIS (Netherlands)

Wang, J.; Heijden, R. van der; Spijksma, G.; Reijmers, T.; Wang, M.; Xu, G.; Hankemeier, T.; Greef, J. van der

2009-01-01

A matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) method was developed for the high throughput and robust qualitative profiling of alkaloids in Fuzi-the processed lateral roots of the Chinese herbal medicine Aconitum carmichaeli Debx (A. carmichaeli). After optimization,

Impact of international financial assistance on economic growth in Europe after the World War II

Directory of Open Access Journals (Sweden)

Polchanov A.Yu.

2017-03-01

Full Text Available This research is devoted to studying the impact of international financial aid on economic growth in Europe after the Second World War. The aim of the investigation is the identification of regularities of post-war recovery of European economies in the second half of the twentieth century and the assessment of international financial aid’s role in the economic growth stimulation. The author summarizes domestic and foreign researchers’ achievements of studying the issue of the Marshall Plan and its importance for modern Ukraine, and differentiates the classic, capitalistic and modern stages of post-conflict reconstruction of the national economies. The relation between the amount of financial assistance from US government to 14 European countries and the growth of GDP in 1947–1952 is studied with the help of correlation and regression analysis and their significant linear dependence is determined. The issue of institutional support of international financing program of economic recovery of Europe has not been left without attention.

InterviewStreamliner, a minimalist, free, open source, relational approach to computer-assisted qualitative data analysis software

NARCIS (Netherlands)

H.D. Pruijt (Hans)

2010-01-01

textabstractInterviewStreamliner is a free, open source, minimalist alternative to complex computer-assisted qualitative data analysis packages. It builds on the flexibility of relational database management technology.

The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

Science.gov (United States)

Seo, You-Jin; Woo, Honguk

2010-01-01

Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

Computer-based medical education in Benha University, Egypt: knowledge, attitude, limitations, and suggestions.

Science.gov (United States)

Bayomy, Hanaa; El Awadi, Mona; El Araby, Eman; Abed, Hala A

2016-12-01

Computer-assisted medical education has been developed to enhance learning and enable high-quality medical care. This study aimed to assess computer knowledge and attitude toward the inclusion of computers in medical education among second-year medical students in Benha Faculty of Medicine, Egypt, to identify limitations, and obtain suggestions for successful computer-based learning. This was a one-group pre-post-test study, which was carried out on second-year students in Benha Faculty of Medicine. A structured self-administered questionnaire was used to compare students' knowledge, attitude, limitations, and suggestions toward computer usage in medical education before and after the computer course to evaluate the change in students' responses. The majority of students were familiar with use of the mouse and keyboard, basic word processing, internet and web searching, and e-mail both before and after the computer course. The proportion of students who were familiar with software programs other than the word processing and trouble-shoot software/hardware was significantly higher after the course (Pcomputer (P=0.008), the inclusion of computer skills course in medical education, downloading lecture handouts, and computer-based exams (Pcomputers limited the inclusion of computer in medical education (Pcomputer labs, lack of Information Technology staff mentoring, large number of students, unclear course outline, and lack of internet access were more frequently reported before the course (Pcomputer labs, inviting Information Technology staff to support computer teaching, and the availability of free Wi-Fi internet access covering several areas in the university campus; all would support computer-assisted medical education. Medical students in Benha University are computer literate, which allows for computer-based medical education. Staff training, provision of computer labs, and internet access are essential requirements for enhancing computer usage in medical

The economic impact of assisted reproductive technology: a review of selected developed countries.

Science.gov (United States)

Chambers, Georgina M; Sullivan, Elizabeth A; Ishihara, Osamu; Chapman, Michael G; Adamson, G David

2009-06-01

To compare regulatory and economic aspects of assisted reproductive technologies (ART) in developed countries. Comparative policy and economic analysis. Couples undergoing ART treatment in the United States, Canada, United Kingdom, Scandinavia, Japan, and Australia. Description of regulatory and financing arrangements, cycle costs, cost-effectiveness ratios, total expenditure, utilization, and price elasticity. Regulation and financing of ART share few general characteristics in developed countries. The cost of treatment reflects the costliness of the underlying healthcare system rather than the regulatory or funding environment. The cost (in 2006 United States dollars) of a standard IVF cycle ranged from $12,513 in the United States to $3,956 in Japan. The cost per live birth was highest in the United States and United Kingdom ($41,132 and $40,364, respectively) and lowest in Scandinavia and Japan ($24,485 and $24,329, respectively). The cost of an IVF cycle after government subsidization ranged from 50% of annual disposable income in the United States to 6% in Australia. The cost of ART treatment did not exceed 0.25% of total healthcare expenditure in any country. Australia and Scandinavia were the only country/region to reach levels of utilization approximating demand, with North America meeting only 24% of estimated demand. Demand displayed variable price elasticity. Assisted reproductive technology is expensive from a patient perspective but not from a societal perspective. Only countries with funding arrangements that minimize out-of-pocket expenses met expected demand. Funding mechanisms should maximize efficiency and equity of access while minimizing the potential harm from multiple births.

MPD3: a useful medicinal plants database for drug designing.

Science.gov (United States)

Mumtaz, Arooj; Ashfaq, Usman Ali; Ul Qamar, Muhammad Tahir; Anwar, Farooq; Gulzar, Faisal; Ali, Muhammad Amjad; Saari, Nazamid; Pervez, Muhammad Tariq

2017-06-01

Medicinal plants are the main natural pools for the discovery and development of new drugs. In the modern era of computer-aided drug designing (CADD), there is need of prompt efforts to design and construct useful database management system that allows proper data storage, retrieval and management with user-friendly interface. An inclusive database having information about classification, activity and ready-to-dock library of medicinal plant's phytochemicals is therefore required to assist the researchers in the field of CADD. The present work was designed to merge activities of phytochemicals from medicinal plants, their targets and literature references into a single comprehensive database named as Medicinal Plants Database for Drug Designing (MPD3). The newly designed online and downloadable MPD3 contains information about more than 5000 phytochemicals from around 1000 medicinal plants with 80 different activities, more than 900 literature references and 200 plus targets. The designed database is deemed to be very useful for the researchers who are engaged in medicinal plants research, CADD and drug discovery/development with ease of operation and increased efficiency. The designed MPD3 is a comprehensive database which provides most of the information related to the medicinal plants at a single platform. MPD3 is freely available at: http://bioinform.info .

Children, computer exposure and musculoskeletal outcomes: the development of pathway models for school and home computer-related musculoskeletal outcomes.

Science.gov (United States)

Harris, Courtenay; Straker, Leon; Pollock, Clare; Smith, Anne

2015-01-01

Children's computer use is rapidly growing, together with reports of related musculoskeletal outcomes. Models and theories of adult-related risk factors demonstrate multivariate risk factors associated with computer use. Children's use of computers is different from adult's computer use at work. This study developed and tested a child-specific model demonstrating multivariate relationships between musculoskeletal outcomes, computer exposure and child factors. Using pathway modelling, factors such as gender, age, television exposure, computer anxiety, sustained attention (flow), socio-economic status and somatic complaints (headache and stomach pain) were found to have effects on children's reports of musculoskeletal symptoms. The potential for children's computer exposure to follow a dose-response relationship was also evident. Developing a child-related model can assist in understanding risk factors for children's computer use and support the development of recommendations to encourage children to use this valuable resource in educational, recreational and communication environments in a safe and productive manner. Computer use is an important part of children's school and home life. Application of this developed model, that encapsulates related risk factors, enables practitioners, researchers, teachers and parents to develop strategies that assist young people to use information technology for school, home and leisure in a safe and productive manner.

Computer-assisted enzyme immunoassays and simplified immunofluorescence assays: applications for the diagnostic laboratory and the veterinarian's office.

Science.gov (United States)

Jacobson, R H; Downing, D R; Lynch, T J

1982-11-15

A computer-assisted enzyme-linked immunosorbent assay (ELISA) system, based on kinetics of the reaction between substrate and enzyme molecules, was developed for testing large numbers of sera in laboratory applications. Systematic and random errors associated with conventional ELISA technique were identified leading to results formulated on a statistically validated, objective, and standardized basis. In a parallel development, an inexpensive system for field and veterinary office applications contained many of the qualities of the computer-assisted ELISA. This system uses a fluorogenic indicator (rather than the enzyme-substrate interaction) in a rapid test (15 to 20 minutes' duration) which promises broad application in serodiagnosis.

Variables that Affect Math Teacher Candidates' Intentions to Integrate Computer-Assisted Mathematics Education (CAME)

Science.gov (United States)

Erdogan, Ahmet

2010-01-01

Based on Social Cognitive Carier Theory (SCCT) (Lent, Brown, & Hackett, 1994, 2002), this study tested the effects of mathematics teacher candidates' self-efficacy in, outcome expectations from, and interest in CAME on their intentions to integrate Computer-Assisted Mathematics Education (CAME). While mathematics teacher candidates' outcome…

13 CFR 302.11 - Economic development information clearinghouse.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Economic development information clearinghouse. 302.11 Section 302.11 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL TERMS AND CONDITIONS FOR INVESTMENT ASSISTANCE § 302.11 Economic development...

24 CFR 290.21 - Computing annual number of units eligible for substitution of tenant-based assistance or...

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Computing annual number of units eligible for substitution of tenant-based assistance or alternative uses. 290.21 Section 290.21 Housing and... Multifamily Projects § 290.21 Computing annual number of units eligible for substitution of tenant-based...

Local knowledge and socio-economic determinants of traditional medicines' utilization in livestock health management in Southwest Nigeria

Directory of Open Access Journals (Sweden)

Mafimisebi Taiwo E

2012-01-01

Full Text Available Abstract Smallholder livestock farmers in Nigeria utilize traditional medicines derived from medicinal plants (PMs for the maintenance of their animals' health. This study was designed to determine the PMs used in the study area and their level of utilization by livestock farmers, compare the level of utilization of PMs across the three states surveyed and identify the socio-economic factors influencing farmer's utilization of PMs. Thirty-five PMs were identified. Farmers had considerable knowledge about the identified PMs but about 80.0% of them used the PMs to poor/moderate extent. There were statistical differences in the utilization level of PMs among the three states. Six socio-economic variables were found to be statistically significant in influencing PMs' utilization. Farmer's age, household size, distance to the nearest veterinary hospital/clinic and extent of travels, had positive effects while negative effects were exhibited by farm income and number of heads of livestock. It was concluded that there was considerable knowledge about PMs and that utilization of PMs varied between the three states. It was recommended that local knowledge of PMs be preserved in the study area through screening and documentation.

Computer-assisted Orthopaedic Surgery: Current State and Future Perspective

Directory of Open Access Journals (Sweden)

Guoyan eZheng

2015-12-01

Full Text Available Introduced about two decades ago, computer-assisted orthopaedic surgery (CAOS has emerged as a new and independent area, due to the importance of treatment of musculoskeletal diseases in orthopaedics and traumatology, increasing availability of different imaging modalities, and advances in analytics and navigation tools. The aim of this paper is to present the basic elements of CAOS devices and to review state-of-the-art examples of different imaging modalities used to create the virtual representations, of different position tracking devices for navigation systems, of different surgical robots, of different methods for registration and referencing, and of CAOS modules that have been realized for different surgical procedures. Future perspectives will also be outlined.

Opening up to Big Data: Computer-Assisted Analysis of Textual Data in Social Sciences

Directory of Open Access Journals (Sweden)

Gregor Wiedemann

2013-05-01

Full Text Available Two developments in computational text analysis may change the way qualitative data analysis in social sciences is performed: 1. the availability of digital text worth to investigate is growing rapidly, and 2. the improvement of algorithmic information extraction approaches, also called text mining, allows for further bridging the gap between qualitative and quantitative text analysis. The key factor hereby is the inclusion of context into computational linguistic models which extends conventional computational content analysis towards the extraction of meaning. To clarify methodological differences of various computer-assisted text analysis approaches the article suggests a typology from the perspective of a qualitative researcher. This typology shows compatibilities between manual qualitative data analysis methods and computational, rather quantitative approaches for large scale mixed method text analysis designs. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1302231

A web ontology for brain trauma patient computer-assisted rehabilitation.

Science.gov (United States)

Zikos, Dimitrios; Galatas, George; Metsis, Vangelis; Makedon, Fillia

2013-01-01

In this paper we describe CABROnto, which is a web ontology for the semantic representation of the computer assisted brain trauma rehabilitation. This is a novel and emerging domain, since it employs the use of robotic devices, adaptation software and machine learning to facilitate interactive and adaptive rehabilitation care. We used Protégé 4.2 and Protégé-Owl schema editor. The primary goal of this ontology is to enable the reuse of the domain knowledge. CABROnto has nine main classes, more than 50 subclasses, existential and cardinality restrictions. The ontology can be found online at Bioportal.

The economic contribution of the Northern Ontario School of Medicine to communities participating in distributed medical education.

Science.gov (United States)

Hogenbirk, John C; Robinson, David R; Hill, Mary Ellen; Pong, Raymond W; Minore, Bruce; Adams, Ken; Strasser, Roger P; Lipinski, Joe

2015-01-01

The economic contribution of medical schools to major urban centres can be substantial, but there is little information on the contribution to the economy of participating communities made by schools that provide education and training away from major cities and academic health science centres. We sought to assess the economic contribution of the Northern Ontario School of Medicine (NOSM) to northern Ontario communities participating in NOSM's distributed medical education programs. We developed a local economic model and used actual expenditures from 2007/08 to assess the economic contribution of NOSM to communities in northern Ontario. We also estimated the economic contribution of medical students or residents participating in different programs in communities away from the university campuses. To explore broader economic effects, we conducted semistructured interviews with leaders in education, health care and politics in northern Ontario. The total economic contribution to northern Ontario was $67.1 million based on $36.3 million in spending by NOSM and $1.0 million spent by students. Economic contributions were greatest in the university campus cities of Thunder Bay ($26.7 million) and Sudbury ($30.4 million), and $0.8-$1.2 million accrued to the next 3 largest population centres. Communities might realize an economic contribution of $7300-$103 900 per pair of medical learners per placement. Several of the 59 interviewees remarked that the dollar amount could be small to moderate but had broader economic implications. Distributed medical education at the NOSM resulted in a substantial economic contribution to participating communities.

The Lower Manhattan Project: A New Approach to Computer-Assisted Learning in History Classrooms.

Science.gov (United States)

Crozier, William; Gaffield, Chad

1990-01-01

The Lower Manhattan Project, a computer-assisted undergraduate course in U.S. history, enhances student appreciation of the historical process through research and writing. Focuses on the late nineteenth and early twentieth centuries emphasizing massive immigration, rapid industrialization, and the growth of cities. Includes a reading list and…

Environmental Factors Affecting Computer Assisted Language Learning Success: A Complex Dynamic Systems Conceptual Model

Science.gov (United States)

Marek, Michael W.; Wu, Wen-Chi Vivian

2014-01-01

This conceptual, interdisciplinary inquiry explores Complex Dynamic Systems as the concept relates to the internal and external environmental factors affecting computer assisted language learning (CALL). Based on the results obtained by de Rosnay ["World Futures: The Journal of General Evolution", 67(4/5), 304-315 (2011)], who observed…

Effects of Computer-Assisted Jigsaw II Cooperative Learning Strategy on Physics Achievement and Retention

Science.gov (United States)

Gambari, Isiaka Amosa; Yusuf, Mudasiru Olalere

2016-01-01

This study investigated the effects of computer-assisted Jigsaw II cooperative strategy on physics achievement and retention. The study also determined how moderating variables of achievement levels as it affects students' performance in physics when Jigsaw II cooperative learning is used as an instructional strategy. Purposive sampling technique…

From Musical Grammars to Music Cognition in the 1980s and 1990s: Highlights of the History of Computer-Assisted Music Analysis

Directory of Open Access Journals (Sweden)

Nico Schüler

2007-12-01

Full Text Available While approaches that had already established historical precedents – computer-assisted analytical approaches drawing on statistics and information theory – developed further, many research projects conducted during the 1980s aimed at the development of new methods of computer-assisted music analysis. Some projects discovered new possibilities related to using computers to simulate human cognition and perception, drawing on cognitive musicology and Artificial Intelligence, areas that were themselves spurred on by new technical developments and by developments in computer program design. The 1990s ushered in revolutionary methods of music analysis, especially those drawing on Artificial Intelligence research. Some of these approaches started to focus on musical sound, rather than scores. They allowed music analysis to focus on how music is actually perceived. In some approaches, the analysis of music and of music cognition merged. This article provides an overview of computer-assisted music analysis of the 1980s and 1990s, as it relates to music cognition. Selected approaches are being discussed.

Design and Study of a Next-Generation Computer-Assisted System for Transoral Laser Microsurgery

Directory of Open Access Journals (Sweden)

Nikhil Deshpande PhD

2018-05-01

Full Text Available Objective To present a new computer-assisted system for improved usability, intuitiveness, efficiency, and controllability in transoral laser microsurgery (TLM. Study Design Pilot technology feasibility study. Setting A dedicated room with a simulated TLM surgical setup: surgical microscope, surgical laser system, instruments, ex vivo pig larynxes, and computer-assisted system. Subjects and Methods The computer-assisted laser microsurgery (CALM system consists of a novel motorized laser micromanipulator and a tablet- and stylus-based control interface. The system setup includes the Leica 2 surgical microscope and the DEKA HiScan Surgical laser system. The system was validated through a first-of-its-kind observational study with 57 international surgeons with varied experience in TLM. The subjects performed real surgical tasks on ex vivo pig larynxes in a simulated TLM scenario. The qualitative aspects were established with a newly devised questionnaire assessing the usability, efficiency, and suitability of the system. Results The surgeons evaluated the CALM system with an average score of 6.29 (out of 7 in ease of use and ease of learning, while an average score of 5.96 was assigned for controllability and safety. A score of 1.51 indicated reduced workload for the subjects. Of 57 subjects, 41 stated that the CALM system allows better surgical quality than the existing TLM systems. Conclusions The CALM system augments the usability, controllability, and efficiency in TLM. It enhances the ergonomics and accuracy beyond the current state of the art, potentially improving the surgical safety and quality. The system offers the intraoperative automated scanning of customized long incisions achieving uniform resections at the surgical site.

Can Neuroscience Assist Us in Constructing Better Patterns of Economic Decision-Making?

Directory of Open Access Journals (Sweden)

George Lăzăroiu

2017-10-01

Full Text Available We draw on outstanding research (Sanfey et al., 2006; McCabe, 2008; Bernheim, 2009; Camerer, 2013; Radu and McClure, 2013; Declerck and Boone, 2016 to substantiate that neuroeconomics covers the investigation of the biological microfoundations of economic cognition and economic conduct, attempts to prove that a superior grasp of how choices are made brings about superior expectations regarding which options are selected, preserves the strictness of economic analysis in defining value-based decision, and associates imaging techniques with economic pattern to explain how individuals decide on a strategy taking into account various possible choices. Neuroeconomics is adequately prepared to regulate the notion of how choices are determined by mental states. The position that will be elaborated in this article is that neuroeconomic patterns are enabled and enhanced in descriptive capacity by psychological outcomes and substantiated in biological processes. Advancement in neuroeconomics takes place when outcomes from distinct procedures are coherent with an ordinary mechanistic clarification of what generates choice, construed by a computational pattern. We will develop this point further by proving that economics improves the concerted effort of neuroeconomics by using its observations in the various results that may stem from the planned and market interplays of diverse participants, and via a series of accurate, explicit, mathematical patterns to construe such interplays and results. Neuroeconomics experiments employ a mixture of brain imaging/stimulation tests advanced in the cognitive neurosciences and microeconomic systems/game theory tests advanced in the economic sciences. Our analyses indicate that neuroeconomics aims to employ the supplementary input gained from brain investigations, associated with the decision maker’s selection, with the purpose of better grasping the cogitation process and to utilize the outcomes to enhance economic