A COMPUTER APPLICATION FOR THE ARCHITECTURAL PROGRAM DEVELOPMENT IN DESIGN EDUCATION

Directory of Open Access Journals (Sweden)

Daniel de Carvalho Moreira

2012-02-01

Full Text Available The development of the architectural program in the design studio faces several difficulties. The purpose of the program is to describe the conditions where the building being designed will operate; this requires a lot of information and organization. Due to its complexity, the architetural program definition in the disciplines of design is often simplified. This article discusses such issue and proposes a computer application (SINFORMA that gathers information about the building and the theme of the project in order to develop the architectural program based on structures proposed by bibliographic references. The SINFORMA is composed by a framework which includes a data base and modules which analyze and organize functional requirements, according to the Problem Seeking method and the contemporary values of architecture enumerated by Hershberger. It is discussed how the application can be applied in design education and how it offers students a practical approach and a comprehensive data analysis for the design of built environment. Keywords: Architectural programming, Architectural design, Education.

Development of a 3-D flow analysis computer program for integral reactor

International Nuclear Information System (INIS)

Youn, H. Y.; Lee, K. H.; Kim, H. K.; Whang, Y. D.; Kim, H. C.

2003-01-01

A 3-D computational fluid dynamics program TASS-3D is being developed for the flow analysis of primary coolant system consists of complex geometries such as SMART. A pre/post processor also is being developed to reduce the pre/post processing works such as a computational grid generation, set-up the analysis conditions and analysis of the calculated results. TASS-3D solver employs a non-orthogonal coordinate system and FVM based on the non-staggered grid system. The program includes the various models to simulate the physical phenomena expected to be occurred in the integral reactor and will be coupled with core dynamics code, core T/H code and the secondary system code modules. Currently, the application of TASS-3D is limited to the single phase of liquid, but the code will be further developed including 2-phase phenomena expected for the normal operation and the various transients of the integrator reactor in the next stage

Exploring Poetry through Interactive Computer Programs.

Science.gov (United States)

Nimchinsky, Howard; Camp, Jocelyn

The goal of a project was to design, test, and evaluate several computer programs that allow students in introductory literature and poetry courses to explore a poem in detail and, through a dialogue with the program, to develop their own interpretation of it. Computer programs were completed on poems by Robert Frost and W.H. Auden. Both programs…

USERDA computer program summaries. Numbers 177--239

International Nuclear Information System (INIS)

1975-10-01

Since 1960 the Argonne Code Center has served as a U. S. Atomic Energy Commission information center for computer programs developed and used primarily for the solution of problems in nuclear physics, reactor design, reactor engineering and operation. The Center, through a network of registered installations, collects, validates, maintains, and distributes a library of these computer programs and publishes a compilation of abstracts describing them. In 1972 the scope of the Center's activities was officially expanded to include computer programs developed in all of the U. S. Atomic Energy Commission program areas and the compilation and publication of this report. The Computer Program Summary report contains summaries of computer programs at the specification stage, under development, being checked out, in use, or available at ERDA offices, laboratories, and contractor installations. Programs are divided into the following categories: cross section and resonance integral calculations; spectrum calculations, generation of group constants, lattice and cell problems; static design studies; depletion, fuel management, cost analysis, and reactor economics; space-independent kinetics; space--time kinetics, coupled neutronics--hydrodynamics--thermodynamics and excursion simulations; radiological safety, hazard and accident analysis; heat transfer and fluid flow; deformation and stress distribution computations, structural analysis and engineering design studies; gamma heating and shield design programs; reactor systems analysis; data preparation; data management; subsidiary calculations; experimental data processing; general mathematical and computing system routines; materials; environmental and earth sciences; space sciences; electronics and engineering equipment; chemistry; particle accelerators and high-voltage machines; physics; controlled thermonuclear research; biology and medicine; and data

Structured Design Language for Computer Programs

Science.gov (United States)

Pace, Walter H., Jr.

1986-01-01

Box language used at all stages of program development. Developed to provide improved productivity in designing, coding, and maintaining computer programs. BOX system written in FORTRAN 77 for batch execution.

Computer Programming Languages for Health Care

Science.gov (United States)

O'Neill, Joseph T.

1979-01-01

This paper advocates the use of standard high level programming languages for medical computing. It recommends that U.S. Government agencies having health care missions implement coordinated policies that encourage the use of existing standard languages and the development of new ones, thereby enabling them and the medical computing community at large to share state-of-the-art application programs. Examples are based on a model that characterizes language and language translator influence upon the specification, development, test, evaluation, and transfer of application programs.

Multi-level programming paradigm for extreme computing

International Nuclear Information System (INIS)

Petiton, S.; Sato, M.; Emad, N.; Calvin, C.; Tsuji, M.; Dandouna, M.

2013-01-01

In order to propose a framework and programming paradigms for post peta-scale computing, on the road to exa-scale computing and beyond, we introduced new languages, associated with a hierarchical multi-level programming paradigm, allowing scientific end-users and developers to program highly hierarchical architectures designed for extreme computing. In this paper, we explain the interest of such hierarchical multi-level programming paradigm for extreme computing and its well adaptation to several large computational science applications, such as for linear algebra solvers used for reactor core physic. We describe the YML language and framework allowing describing graphs of parallel components, which may be developed using PGAS-like language such as XMP, scheduled and computed on supercomputers. Then, we propose experimentations on supercomputers (such as the 'K' and 'Hooper' ones) of the hybrid method MERAM (Multiple Explicitly Restarted Arnoldi Method) as a case study for iterative methods manipulating sparse matrices, and the block Gauss-Jordan method as a case study for direct method manipulating dense matrices. We conclude proposing evolutions for this programming paradigm. (authors)

Understanding Computational Thinking before Programming: Developing Guidelines for the Design of Games to Learn Introductory Programming through Game-Play

Science.gov (United States)

Kazimoglu, Cagin; Kiernan, Mary; Bacon, Liz; MacKinnon, Lachlan

2011-01-01

This paper outlines an innovative game-based approach to learning introductory programming that is grounded in the development of computational thinking at an abstract conceptual level, but also provides a direct contextual relationship between game-play and learning traditional introductory programming. The paper proposes a possible model for,…

The development of Sonic Pi and its use in educational partnerships: Co-creating pedagogies for learning computer programming

OpenAIRE

Aaron, S; Blackwell, Alan Frank; Burnard, Pamela Anne

2017-01-01

Sonic Pi is a new open source software tool and platform originally developed for the Raspberry Pi computer, designed to enable school children to learn programming by creating music. In this article we share insights from a scoping study on the development of Sonic Pi and its use in educational partnerships. Our findings draw attention to the importance of collaborative relationships between teacher and computer scientist and the value of creative pedagogies for learning computer programming...

Development of a fast running accident analysis computer program for use in a simulator

International Nuclear Information System (INIS)

Cacciabue, P.C.

1985-01-01

This paper describes how a reactor safety nuclear computer program can be modified and improved with the aim of reaching a very fast running tool to be used as a physical model in a plant simulator, without penalizing the accuracy of results. It also discusses some ideas on how the physical theoretical model can be combined to a driving statistical tool for the build up of the entire package of software to be implemented in the simulator for risk and reliability analysis. The approach to the problem, although applied to a specific computer program, can be considered quite general if an already existing and well tested code is being used for the purpose. The computer program considered is ALMOD, originally developed for the analysis of the thermohydraulic and neutronic behaviour of the reactor core, primary circuit and steam generator during operational and special transients. (author)

BREED: a CDC-7600 computer program for the automation of breeder reactor design analysis (LWBR Development Program)

International Nuclear Information System (INIS)

Candelore, N.R.; Maher, C.M.

1985-03-01

BREED is an executive CDC-7600 program which was developed to facilitate the sequence of calculations and movement of data through a prescribed series of breeder reactor design computer programs in an uninterrupted single-job mode. It provides the capability to interface different application programs into a single computer run to provide a complete design function. The automation that can be achieved as a result of using BREED significantly reduces not only the time required for data preparation and hand transfer of data, but also the time required to complete an iteration of the total design effort. Data processing within a technical discipline and data transfer between technical disciplines can be accommodated. The input/output data processing is achieved with BREED by using a set of simple, easily understood user commands, usually short descriptive words, which the user inserts in his input deck. The input deck completely identifies and controls the calculational sequence needed to produce a desired end product. This report has been prepared to provide instructional material on the use of BREED and its user-oriented procedures to facilitate computer automation of design calculations

The Y2K program for scientific-analysis computer programs at AECL

International Nuclear Information System (INIS)

Popovic, J.; Gaver, C.; Chapman, D.

1999-01-01

The evaluation of scientific-analysis computer programs for year-2000 compliance is part of AECL' s year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

The Y2K program for scientific-analysis computer programs at AECL

International Nuclear Information System (INIS)

Popovic, J.; Gaver, C.; Chapman, D.

1999-01-01

The evaluation of scientific analysis computer programs for year-2000 compliance is part of AECL's year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

Programming in biomolecular computation

DEFF Research Database (Denmark)

Hartmann, Lars Røeboe; Jones, Neil; Simonsen, Jakob Grue

2011-01-01

Our goal is to provide a top-down approach to biomolecular computation. In spite of widespread discussion about connections between biology and computation, one question seems notable by its absence: Where are the programs? We identify a number of common features in programming that seem...... conspicuously absent from the literature on biomolecular computing; to partially redress this absence, we introduce a model of computation that is evidently programmable, by programs reminiscent of low-level computer machine code; and at the same time biologically plausible: its functioning is defined...... by a single and relatively small set of chemical-like reaction rules. Further properties: the model is stored-program: programs are the same as data, so programs are not only executable, but are also compilable and interpretable. It is universal: all computable functions can be computed (in natural ways...

Evolution of the Milieu Approach for Software Development for the Polymorphous Computing Architecture Program

National Research Council Canada - National Science Library

Dandass, Yoginder

2004-01-01

A key goal of the DARPA Polymorphous Computing Architectures (PCA) program is to develop reactive closed-loop systems that are capable of being dynamically reconfigured in order to respond to changing mission scenarios...

Development of application program and building database to increase facilities for using the radiation effect assessment computer codes

International Nuclear Information System (INIS)

Hyun Seok Ko; Young Min Kim; Suk-Hoon Kim; Dong Hoon Shin; Chang-Sun Kang

2005-01-01

The current radiation effect assessment system is required the skillful technique about the application for various code and high level of special knowledge classified by field. Therefore, as a matter of fact, it is very difficult for the radiation users' who don't have enough special knowledge to assess or recognize the radiation effect properly. For this, we already have developed the five Computer codes(windows-based), that is the radiation effect assessment system, in radiation utilizing field including the nuclear power generation. It needs the computer program that non-specialist can use the five computer codes to have already developed with ease. So, we embodied the A.I-based specialist system that can infer the assessment system by itself, according to the characteristic of given problem. The specialist program can guide users, search data, inquire of administrator directly. Conceptually, with circumstance which user to apply the five computer code may encounter actually, we embodied to consider aspects as follows. First, the accessibility of concept and data to need must be improved. Second, the acquirement of reference theory and use of corresponding computer code must be easy. Third, Q and A function needed for solution of user's question out of consideration previously. Finally, the database must be renewed continuously. Actually, to express this necessity, we develop the client program to organize reference data, to build the access methodology(query) about organized data, to load the visible expression function of searched data. And It is embodied the instruction method(effective theory acquirement procedure and methodology) to acquire the theory referring the five computer codes. It is developed the data structure access program(DBMS) to renew continuously data with ease. For Q and A function, it is embodied the Q and A board within client program because the user of client program can search the content of question and answer. (authors)

Developing a self-learning training program for RIS computer skills.

Science.gov (United States)

Stike, R; Olivi, P

2000-01-01

The demonstration of competency by healthcare professionals remains a priority for hospital administrators, as well as for the Joint Commission on Accreditation of Healthcare Organizations (JCAHO). Unfortunately, staff members who have to complete competency exercises often describe the process as a burden. Ineffective training processes may be the culprit. Our teaching hospital developed a training program for the radiology information system (RIS) computer system used by an imaging department of more than 200 staff members. The emphasis of our training program was on the design phase and the contribution of subject-matter experts (SMEs) to the content and testing of training materials, which included a computer-assisted, self-learning manual (SLM) and a pocket guide. The first step in the design process was to identify subject matter experts (SMEs) within the imaging department. Seven SMEs were shadowed by the IT educator. The role of the SME was to demonstrate current practices with RIS, to state principles involved and to serve as a reference for questions during training development. The steps that followed planning and design were: training delivery, evaluation and ongoing training. These steps were implemented in a series of workshops, which included soliciting feedback about the training program. Feedback was used to revise the SLM. The RIS SLM training project was a huge success for everyone involved. The average score for the core-skills test was higher than 90 percent. Seventy-five percent of the current staff was trained in the first phase, including radiology students. Our yearly cost savings using SLM workshops instead of on-the-job training will be about $35,000. We attribute the success of this project to a detailed timeline, SME contributions, the pilot testing phase, and the positive attitude of the imaging staff.

Development and validation of the computer program TNHXY

International Nuclear Information System (INIS)

Xolocostli M, V.; Valle G, E. del; Alonso V, G.

2003-01-01

This work describes the development and validation of the computer program TNHXY (Neutron Transport with Nodal Hybrid schemes in X Y geometry), which solves the discrete-ordinates neutron transport equations using a discontinuous Bi-Linear (DBiL) nodal hybrid method. One of the immediate applications of TNHXY is in the analysis of nuclear fuel assemblies, in particular those of BWRs. Its validation was carried out by reproducing some results for test or benchmark problems that some authors have solved using other numerical techniques. This allows to ensure that the program will provide results with similar accuracy for other problems of the same type. To accomplish this two benchmark problems have been solved. The first problem consists in a BWR fuel assembly in a 7x7 array without and with control rod. The results obtained with TNHXY are consistent with those reported for the TWOTRAN code. The second benchmark problem is a Mixed Oxide (MOX) fuel assembly in a 10x10 array. This last problem is known as the WPPR benchmark problem of the NEA Data Bank and the results are compared with those obtained with commercial codes like HELIOS, MCNP-4B and CPM-3. (Author)

Viscous wing theory development. Volume 2: GRUMWING computer program user's manual

Science.gov (United States)

Chow, R. R.; Ogilvie, P. L.

1986-01-01

This report is a user's manual which describes the operation of the computer program, GRUMWING. The program computes the viscous transonic flow over three-dimensional wings using a boundary layer type viscid-inviscid interaction approach. The inviscid solution is obtained by an approximate factorization (AFZ)method for the full potential equation. The boundary layer solution is based on integral entrainment methods.

The Main Tendencies in the Development of Startup Projects as a Form of Innovative-Creative Enterprises in the Ukrainian Computer Programming Market

Directory of Open Access Journals (Sweden)

Garafonova Olga I.

2017-10-01

Full Text Available The article is aimed at studying the main tendencies in the development of startup projects as a form of innovative-creative enterprises in the Ukrainian computer programming market. A definition of «innovative-creative enterprises» has been proposed, the main features of startups as a form of innovative-creative enterprises has been considered. The directions of development of the computer programming market were analyzed, considering the most significant future trends, products and services in the computer programming sector. An analysis of startups in the Ukrainian computer programming market, based on the volume of investments made, was carried out. A model for the development of startup projects as a form of innovative-creative enterprises has been designed. The unfamiliar promising spheres, wherein have not yet been launched startups in the Ukrainian computer programming market, have been indicated.

Report of Investigation Committee on Programs for Research and Development of Strategic Software for Advanced Computing; Kodo computing yo senryakuteki software no kenkyu kaihatsu program kento iinkai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-26

The committee met on December 26, 2000, with 32 people in attendance. Discussion was made on the results of surveys conducted for the development of strategic software for advanced computing and on candidate projects for strategic software development. Taken up at the meeting were eight subjects which were the interim report on the survey results, semiconductor TCAD (technology computer-aided design) system, nanodevice surface analysis system, network distribution parallel processing platform (tentative name), fatigue simulation system, chemical reaction simulator, protein structure analysis system, and a next-generation fluid analysis system. In this report, the author uses his own way in arranging the discussion results into the four categories of (1) a strategic software development system, (2) popularization method and maintenance system, (3) handling of the results, and (4) the evaluation of the program for research and development. In relation to category (1), it is stated that the software grows up with the passage of time, that the software is a commercial program, and that in the development of a commercial software program the process of basic study up to the preparation of a prototype should be completely separated from the process for its completion. (NEDO)

Computational Physics Program of the National MFE Computer Center

International Nuclear Information System (INIS)

Mirin, A.A.

1984-12-01

The principal objective of the computational physics group is to develop advanced numerical models for the investigation of plasma phenomena and the simulation of present and future magnetic confinement devices. A summary of the groups activities is presented, including computational studies in MHD equilibria and stability, plasma transport, Fokker-Planck, and efficient numerical and programming algorithms. References are included

Computer programs for display. [magnetic tapes - project planning/NASA programs

Science.gov (United States)

1975-01-01

The developments of an information storage and retrieval system are presented. Computer programs used in the system are described; the programs allow display messages to be placed on disks in an off-line environment permitting a more efficient use of memory. A time table that shows complete and scheduled developments of the system is given.

Mastering cloud computing foundations and applications programming

CERN Document Server

Buyya, Rajkumar; Selvi, SThamarai

2013-01-01

Mastering Cloud Computing is designed for undergraduate students learning to develop cloud computing applications. Tomorrow's applications won't live on a single computer but will be deployed from and reside on a virtual server, accessible anywhere, any time. Tomorrow's application developers need to understand the requirements of building apps for these virtual systems, including concurrent programming, high-performance computing, and data-intensive systems. The book introduces the principles of distributed and parallel computing underlying cloud architectures and specifical

Use of the computer program in a cloud computing

Directory of Open Access Journals (Sweden)

Radovanović Sanja

2013-01-01

Full Text Available Cloud computing represents a specific networking, in which a computer program simulates the operation of one or more server computers. In terms of copyright, all technological processes that take place within the cloud computing are covered by the notion of copying computer programs, and exclusive right of reproduction. However, this right suffers some limitations in order to allow normal use of computer program by users. Based on the fact that the cloud computing is virtualized network, the issue of normal use of the computer program requires to put all aspects of the permitted copying into the context of a specific computing environment and specific processes within the cloud. In this sense, the paper pointed out that the user of a computer program in cloud computing, needs to obtain the consent of the right holder for any act which he undertakes using the program. In other words, the copyright in the cloud computing is a full scale, and thus the freedom of contract (in the case of this particular restriction as well.

Development of a standard for computer program verification and control

International Nuclear Information System (INIS)

Dunn, T.E.; Ozer, O.

1980-01-01

It is expected that adherence to the guidelines of the ANS 10.4 will: 1. Provide confidence that the program conforms to its requirements specification; 2. Provide confidence that the computer program has been adequately evaluated and tested; 3. Provide confidence that program changes are adequately evaluated, tested, and controlled; and 4. Enhance assurance that reliable data will be produced for engineering, scientific, and safety analysis purposes

Fluid dynamics computer programs for NERVA turbopump

Science.gov (United States)

Brunner, J. J.

1972-01-01

During the design of the NERVA turbopump, numerous computer programs were developed for the analyses of fluid dynamic problems within the machine. Program descriptions, example cases, users instructions, and listings for the majority of these programs are presented.

Systematic control of large computer programs

International Nuclear Information System (INIS)

Goedbloed, J.P.; Klieb, L.

1986-07-01

A package of CCL, UPDATE, and FORTRAN procedures is described which facilitates the systematic control and development of large scientific computer programs. The package provides a general tool box for this purpose which contains many conveniences for the systematic administration of files, editing, reformating of line printer output files, etc. In addition, a small number of procedures is devoted to the problem of structured development of a large computer program which is used by a group of scientists. The essence of the method is contained in three procedures N, R, and X for the creation of a new UPDATE program library, its revision, and execution, resp., and a procedure REVISE which provides a joint editor - UPDATE session which combines the advantages of the two systems, viz. speed and rigor. (Auth.)

Correlation signatures of wet soils and snows. [algorithm development and computer programming

Science.gov (United States)

Phillips, M. R.

1972-01-01

Interpretation, analysis, and development of algorithms have provided the necessary computational programming tools for soil data processing, data handling and analysis. Algorithms that have been developed thus far, are adequate and have been proven successful for several preliminary and fundamental applications such as software interfacing capabilities, probability distributions, grey level print plotting, contour plotting, isometric data displays, joint probability distributions, boundary mapping, channel registration and ground scene classification. A description of an Earth Resources Flight Data Processor, (ERFDP), which handles and processes earth resources data under a users control is provided.

Development of a computer program for the cost analysis of spent fuel management

International Nuclear Information System (INIS)

Choi, Heui Joo; Lee, Jong Youl; Choi, Jong Won; Cha, Jeong Hun; Whang, Joo Ho

2009-01-01

So far, a substantial amount of spent fuels have been generated from the PWR and CANDU reactors. They are being temporarily stored at the nuclear power plant sites. It is expected that the temporary storage facility will be full of spent fuels by around 2016. The government plans to solve the problem by constructing an interim storage facility soon. The radioactive management act was enacted in 2008 to manage the spent fuels safety in Korea. According to the act, the radioactive waste management fund which will be used for the transportation, interim storage, and the final disposal of spent fuels has been established. The cost for the management of spent fuels is surprisingly high and could include a lot of uncertainty. KAERI and Kyunghee University have developed cost estimation tools to evaluate the cost for a spent fuel management based on an engineering design and calculation. It is not easy to develop a tool for a cost estimation under the situation that the national policy on a spent fuel management has not yet been fixed at all. Thus, the current version of the computer program is based on the current conceptual design of each management system. The main purpose of this paper is to introduce the computer program developed for the cost analysis of a spent fuel management. In order to show the application of the program, a spent fuel management scenario is prepared, and the cost for the scenario is estimated

Programming in biomolecular computation

DEFF Research Database (Denmark)

Hartmann, Lars Røeboe; Jones, Neil; Simonsen, Jakob Grue

2010-01-01

in a strong sense: a universal algorithm exists, that is able to execute any program, and is not asymptotically inefficient. A prototype model has been implemented (for now in silico on a conventional computer). This work opens new perspectives on just how computation may be specified at the biological level......., by programs reminiscent of low-level computer machine code; and at the same time biologically plausible: its functioning is defined by a single and relatively small set of chemical-like reaction rules. Further properties: the model is stored-program: programs are the same as data, so programs are not only...... executable, but are also compilable and interpretable. It is universal: all computable functions can be computed (in natural ways and without arcane encodings of data and algorithm); it is also uniform: new “hardware” is not needed to solve new problems; and (last but not least) it is Turing complete...

Computational Materials Program for Alloy Design

Science.gov (United States)

Bozzolo, Guillermo

2005-01-01

The research program sponsored by this grant, "Computational Materials Program for Alloy Design", covers a period of time of enormous change in the emerging field of computational materials science. The computational materials program started with the development of the BFS method for alloys, a quantum approximate method for atomistic analysis of alloys specifically tailored to effectively deal with the current challenges in the area of atomistic modeling and to support modern experimental programs. During the grant period, the program benefited from steady growth which, as detailed below, far exceeds its original set of goals and objectives. Not surprisingly, by the end of this grant, the methodology and the computational materials program became an established force in the materials communitiy, with substantial impact in several areas. Major achievements during the duration of the grant include the completion of a Level 1 Milestone for the HITEMP program at NASA Glenn, consisting of the planning, development and organization of an international conference held at the Ohio Aerospace Institute in August of 2002, finalizing a period of rapid insertion of the methodology in the research community worlwide. The conference, attended by citizens of 17 countries representing various fields of the research community, resulted in a special issue of the leading journal in the area of applied surface science. Another element of the Level 1 Milestone was the presentation of the first version of the Alloy Design Workbench software package, currently known as "adwTools". This software package constitutes the first PC-based piece of software for atomistic simulations for both solid alloys and surfaces in the market.Dissemination of results and insertion in the materials community worldwide was a primary focus during this period. As a result, the P.I. was responsible for presenting 37 contributed talks, 19 invited talks, and publishing 71 articles in peer-reviewed journals, as

The Computational Physics Program of the national MFE Computer Center

International Nuclear Information System (INIS)

Mirin, A.A.

1989-01-01

Since June 1974, the MFE Computer Center has been engaged in a significant computational physics effort. The principal objective of the Computational Physics Group is to develop advanced numerical models for the investigation of plasma phenomena and the simulation of present and future magnetic confinement devices. Another major objective of the group is to develop efficient algorithms and programming techniques for current and future generations of supercomputers. The Computational Physics Group has been involved in several areas of fusion research. One main area is the application of Fokker-Planck/quasilinear codes to tokamaks. Another major area is the investigation of resistive magnetohydrodynamics in three dimensions, with applications to tokamaks and compact toroids. A third area is the investigation of kinetic instabilities using a 3-D particle code; this work is often coupled with the task of numerically generating equilibria which model experimental devices. Ways to apply statistical closure approximations to study tokamak-edge plasma turbulence have been under examination, with the hope of being able to explain anomalous transport. Also, we are collaborating in an international effort to evaluate fully three-dimensional linear stability of toroidal devices. In addition to these computational physics studies, the group has developed a number of linear systems solvers for general classes of physics problems and has been making a major effort at ascertaining how to efficiently utilize multiprocessor computers. A summary of these programs are included in this paper. 6 tabs

Computer Assistance for Writing Interactive Programs: TICS.

Science.gov (United States)

Kaplow, Roy; And Others

1973-01-01

Investigators developed an on-line, interactive programing system--the Teacher-Interactive Computer System (TICS)--to provide assistance to those who were not programers, but nevertheless wished to write interactive instructional programs. TICS had two components: an author system and a delivery system. Underlying assumptions were that…

Development of an electrical impedance computed tomographic two-phase flows analyzer. Annual technical report for program renewal

Energy Technology Data Exchange (ETDEWEB)

Jones, O.C.

1993-05-01

This progress report details the theoretical development, numerical results, experimental design (mechanical), experimental design (electronic), and experimental results for the research program for the development of an electrical impedance computed tomographic two-phase flow analyzer.

Software survey: VOSviewer, a computer program for bibliometric mapping

NARCIS (Netherlands)

N.J.P. van Eck (Nees Jan); L. Waltman (Ludo)

2010-01-01

textabstractWe present VOSviewer, a freely available computer program that we have developed for constructing and viewing bibliometric maps. Unlike most computer programs that are used for bibliometric mapping, VOSviewer pays special attention to the graphical representation of bibliometric maps.

The AAHA Computer Program. American Animal Hospital Association.

Science.gov (United States)

Albers, J W

1986-07-01

The American Animal Hospital Association Computer Program should benefit all small animal practitioners. Through the availability of well-researched and well-developed certified software, veterinarians will have increased confidence in their purchase decisions. With the expansion of computer applications to improve practice management efficiency, veterinary computer systems will further justify their initial expense. The development of the Association's veterinary computer network will provide a variety of important services to the profession.

Description of computer code PRINS, Program for Interpreting Gamma Spectra, developed at ENEA

Energy Technology Data Exchange (ETDEWEB)

Borsari, R. [ENEA, Centro Ricerche `E. Clementel`, Bologna (Italy). Dip. Energia

1995-11-01

The computer code PRINS, program for interpreting gamma Spectra, has been developed in collaboration with CENG/SECC (Centre Etude Nucleaire Grenoble / Service Etude Comportement du Combustible). Later it has been updated and improved at ENEA. Properties of the PRINS code are: (1) A powerful algorithm to locate the peaks; (2) An accurate evaluation of the errors; (3) Possibility of an automatic channels-energy calibration.

Description of computer code PRINS, Program for Interpreting Gamma Spectra, developed at ENEA

International Nuclear Information System (INIS)

Borsari, R.

1995-12-01

The computer code PRINS, PRogram for INterpreting gamma Spectra, has been developed in collaboration with CENG/SECC (Centre Etude Nucleaire Grenoble / Service Etude Comportement du Combustible). Later it has been updated and improved at ENEA. Properties of the PRINS code are: I) A powerful algorithm to locate the peaks; 2) An accurate evaluation of the errors; 3) Possibility of an automatic channels-energy calibration

Development of computer program ENAUDIBL for computation of the sensation levels of multiple, complex, intrusive sounds in the presence of residual environmental masking noise

Energy Technology Data Exchange (ETDEWEB)

Liebich, R. E.; Chang, Y.-S.; Chun, K. C.

2000-03-31

The relative audibility of multiple sounds occurs in separate, independent channels (frequency bands) termed critical bands or equivalent rectangular (filter-response) bandwidths (ERBs) of frequency. The true nature of human hearing is a function of a complex combination of subjective factors, both auditory and nonauditory. Assessment of the probability of individual annoyance, community-complaint reaction levels, speech intelligibility, and the most cost-effective mitigation actions requires sensation-level data; these data are one of the most important auditory factors. However, sensation levels cannot be calculated by using single-number, A-weighted sound level values. This paper describes specific steps to compute sensation levels. A unique, newly developed procedure is used, which simplifies and improves the accuracy of such computations by the use of maximum sensation levels that occur, for each intrusive-sound spectrum, within each ERB. The newly developed program ENAUDIBL makes use of ERB sensation-level values generated with some computational subroutines developed for the formerly documented program SPECTRAN.

Integrating computer programs for engineering analysis and design

Science.gov (United States)

Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

1983-01-01

The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

HEDPIN: a computer program to estimate pinwise power density

International Nuclear Information System (INIS)

Cappiello, M.W.

1976-05-01

A description is given of the digital computer program, HEDPIN. This program, modeled after a previously developed program, POWPIN, provides a means of estimating the pinwise power density distribution in fast reactor triangular pitched pin bundles. The capability also exists for computing any reaction rate of interest at the respective pin positions within an assembly. HEDPIN was developed in support of FTR fuel and test management as well as fast reactor core design and core characterization planning and analysis. The results of a test devised to check out HEDPIN's computational method are given, and the realm of application is discussed. Nearly all programming is in FORTRAN IV. Variable dimensioning is employed to make efficient use of core memory and maintain short running time for small problems. Input instructions, sample problem, and a program listing are also given

Computer aided training system development

International Nuclear Information System (INIS)

Midkiff, G.N.

1987-01-01

The first three phases of Training System Development (TSD) -- job and task analysis, curriculum design, and training material development -- are time consuming and labor intensive. The use of personal computers with a combination of commercial and custom-designed software resulted in a significant reduction in the man-hours required to complete these phases for a Health Physics Technician Training Program at a nuclear power station. This paper reports that each step in the training program project involved the use of personal computers: job survey data were compiled with a statistical package, task analysis was performed with custom software designed to interface with a commercial database management program. Job Performance Measures (tests) were generated by a custom program from data in the task analysis database, and training materials were drafted, edited, and produced using commercial word processing software

Development of selective photoionization spectroscopy technology - Development of a computer program to calculate selective ionization of atoms with multistep processes

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Soon; Nam, Baek Il [Myongji University, Seoul (Korea, Republic of)

1995-08-01

We have developed computer programs to calculate 2-and 3-step selective resonant multiphoton ionization of atoms. Autoionization resonances in the final continuum can be put into account via B-Spline basis set method. 8 refs., 5 figs. (author)

EZLP: An Interactive Computer Program for Solving Linear Programming Problems. Final Report.

Science.gov (United States)

Jarvis, John J.; And Others

Designed for student use in solving linear programming problems, the interactive computer program described (EZLP) permits the student to input the linear programming model in exactly the same manner in which it would be written on paper. This report includes a brief review of the development of EZLP; narrative descriptions of program features,…

Adolescents' Chunking of Computer Programs.

Science.gov (United States)

Magliaro, Susan; Burton, John K.

To investigate what children learn during computer programming instruction, students attending a summer computer camp were asked to recall either single lines or chunks of computer programs from either coherent or scrambled programs. The 16 subjects, ages 12 to 17, were divided into three instructional groups: (1) beginners, who were taught to…

Near-Surface Seismic Velocity Data: A Computer Program For ...

African Journals Online (AJOL)

A computer program (NESURVELANA) has been developed in Visual Basic Computer programming language to carry out a near surface velocity analysis. The method of analysis used includes: Algorithms design and Visual Basic codes generation for plotting arrival time (ms) against geophone depth (m) employing the ...

Study and establishment of a computer program for radiotherapy treatment planning development

International Nuclear Information System (INIS)

Djennaoui, N.

1987-02-01

The modern radiotherapy requires the use of computers. In addition to their accuracy, computers involve an appreciable saving of time in the calculation of isodoses, permitting us to change several times a technique in order to choose the best dose distribution for each case of tumor. The aim of this work was to set a computer program calculating a suitable dose distribution for a given treatment. The algorithm of calculation of the depth dose used in our program permits us to calculate the dose distribution for all photon energies used in radiotherapy, whatever are the energy and modification of the field by the use of wedge filters or bolus [fr

Four-Cylinder Stirling-Engine Computer Program

Science.gov (United States)

Daniele, C. J.; Lorenzo, C. F.

1986-01-01

Computer program developed for simulating steady-state and transient performance of four-cylinder Stirling engine. In model, four cylinders interconnected by four working spaces. Each working space contains seven volumes: one for expansion space, heater, cooler, and compression space and three for regenerator. Thermal time constant for regenerator mass associated with each regenator gas volume. Former code generates results very quickly, since it has only 14 state variables with no energy equation. Current code then used to study various aspects of Stirling engine in much more detail. Program written in FORTRAN IV for use on IBM 370 computer.

Basic design of parallel computational program for probabilistic structural analysis

International Nuclear Information System (INIS)

Kaji, Yoshiyuki; Arai, Taketoshi; Gu, Wenwei; Nakamura, Hitoshi

1999-06-01

In our laboratory, for 'development of damage evaluation method of structural brittle materials by microscopic fracture mechanics and probabilistic theory' (nuclear computational science cross-over research) we examine computational method related to super parallel computation system which is coupled with material strength theory based on microscopic fracture mechanics for latent cracks and continuum structural model to develop new structural reliability evaluation methods for ceramic structures. This technical report is the review results regarding probabilistic structural mechanics theory, basic terms of formula and program methods of parallel computation which are related to principal terms in basic design of computational mechanics program. (author)

Basic design of parallel computational program for probabilistic structural analysis

Energy Technology Data Exchange (ETDEWEB)

Kaji, Yoshiyuki; Arai, Taketoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Gu, Wenwei; Nakamura, Hitoshi

1999-06-01

In our laboratory, for `development of damage evaluation method of structural brittle materials by microscopic fracture mechanics and probabilistic theory` (nuclear computational science cross-over research) we examine computational method related to super parallel computation system which is coupled with material strength theory based on microscopic fracture mechanics for latent cracks and continuum structural model to develop new structural reliability evaluation methods for ceramic structures. This technical report is the review results regarding probabilistic structural mechanics theory, basic terms of formula and program methods of parallel computation which are related to principal terms in basic design of computational mechanics program. (author)

Computer programs as accounting object

Directory of Open Access Journals (Sweden)

I.V. Perviy

2015-03-01

Full Text Available Existing approaches to the regulation of accounting software as one of the types of intangible assets have been considered. The features and current state of the legal protection of computer programs have been analyzed. The reasons for the need to use patent law as a means of legal protection of individual elements of computer programs have been discovered. The influence of the legal aspects of the use of computer programs for national legislation to their accounting reflection has been analyzed. The possible options for the transfer of rights from computer programs copyright owners have been analyzed that should be considered during creation of software accounting system at the enterprise. Identified and analyzed the characteristics of computer software as an intangible asset under the current law. General economic characteristics of computer programs as one of the types of intangible assets have been grounded. The main distinguishing features of software compared to other types of intellectual property have been all ocated

Fermilab advanced computer program multi-microprocessor project

International Nuclear Information System (INIS)

Nash, T.; Areti, H.; Biel, J.

1985-06-01

Fermilab's Advanced Computer Program is constructing a powerful 128 node multi-microprocessor system for data analysis in high-energy physics. The system will use commercial 32-bit microprocessors programmed in Fortran-77. Extensive software supports easy migration of user applications from a uniprocessor environment to the multiprocessor and provides sophisticated program development, debugging, and error handling and recovery tools. This system is designed to be readily copied, providing computing cost effectiveness of below $2200 per VAX 11/780 equivalent. The low cost, commercial availability, compatibility with off-line analysis programs, and high data bandwidths (up to 160 MByte/sec) make the system an ideal choice for applications to on-line triggers as well as an offline data processor

NASA's computer science research program

Science.gov (United States)

Larsen, R. L.

1983-01-01

Following a major assessment of NASA's computing technology needs, a new program of computer science research has been initiated by the Agency. The program includes work in concurrent processing, management of large scale scientific databases, software engineering, reliable computing, and artificial intelligence. The program is driven by applications requirements in computational fluid dynamics, image processing, sensor data management, real-time mission control and autonomous systems. It consists of university research, in-house NASA research, and NASA's Research Institute for Advanced Computer Science (RIACS) and Institute for Computer Applications in Science and Engineering (ICASE). The overall goal is to provide the technical foundation within NASA to exploit advancing computing technology in aerospace applications.

Computer Program Newsletter No. 7

International Nuclear Information System (INIS)

Magnuson, W.G. Jr.

1982-09-01

This issue of the Computer Program Newsletter updates an earlier newsletter (Number 2, September 1979) and focuses on electrical network analysis computer programs. In particular, five network analysis programs (SCEPTRE, SPICE2, NET2, CALAHAN, and EMTP) will be described. The objective of this newsletter will be to provide a very brief description of the input syntax and semantics for each program, highlight their strong and weak points, illustrate how the programs are run at Lawrence Livermore National Laboratory using the Octopus computer network, and present examples of input for each of the programs to illustrate some of the features of each program. In a sense, this newsletter can be used as a quick reference guide to the programs

The Research of the Parallel Computing Development from the Angle of Cloud Computing

Science.gov (United States)

Peng, Zhensheng; Gong, Qingge; Duan, Yanyu; Wang, Yun

2017-10-01

Cloud computing is the development of parallel computing, distributed computing and grid computing. The development of cloud computing makes parallel computing come into people’s lives. Firstly, this paper expounds the concept of cloud computing and introduces two several traditional parallel programming model. Secondly, it analyzes and studies the principles, advantages and disadvantages of OpenMP, MPI and Map Reduce respectively. Finally, it takes MPI, OpenMP models compared to Map Reduce from the angle of cloud computing. The results of this paper are intended to provide a reference for the development of parallel computing.

Description of mathematical models and computer programs

International Nuclear Information System (INIS)

1977-01-01

The paper gives a description of mathematical models and computer programs for analysing possible strategies for spent fuel management, with emphasis on economic analysis. The computer programs developed, describe the material flows, facility construction schedules, capital investment schedules and operating costs for the facilities used in managing the spent fuel. The computer programs use a combination of simulation and optimization procedures for the economic analyses. Many of the fuel cycle steps (such as spent fuel discharges, storage at the reactor, and transport to the RFCC) are described in physical and economic terms through simulation modeling, while others (such as reprocessing plant size and commissioning schedules, interim storage facility commissioning schedules etc.) are subjected to economic optimization procedures to determine the approximate lowest-cost plans from among the available feasible alternatives

Calculation and evaluation methodology of the flawed pipe and the compute program development

International Nuclear Information System (INIS)

Liu Chang; Qian Hao; Yao Weida; Liang Xingyun

2013-01-01

Background: The crack will grow gradually under alternating load for a pressurized pipe, whereas the load is less than the fatigue strength limit. Purpose: Both calculation and evaluation methodology for a flawed pipe that have been detected during in-service inspection is elaborated here base on the Elastic Plastic Fracture Mechanics (EPFM) criteria. Methods: In the compute, the depth and length interaction of a flaw has been considered and a compute program is developed per Visual C++. Results: The fluctuating load of the Reactor Coolant System transients, the initial flaw shape, the initial flaw orientation are all accounted here. Conclusions: The calculation and evaluation methodology here is an important basis for continue working or not. (authors)

Computer technology and computer programming research and strategies

CERN Document Server

Antonakos, James L

2011-01-01

Covering a broad range of new topics in computer technology and programming, this volume discusses encryption techniques, SQL generation, Web 2.0 technologies, and visual sensor networks. It also examines reconfigurable computing, video streaming, animation techniques, and more. Readers will learn about an educational tool and game to help students learn computer programming. The book also explores a new medical technology paradigm centered on wireless technology and cloud computing designed to overcome the problems of increasing health technology costs.

Program MASTERCALC: an interactive computer program for radioanalytical computations. Description and operating instructions

International Nuclear Information System (INIS)

Goode, W.

1980-10-01

MASTERCALC is a computer program written to support radioanalytical computations in the Los Alamos Scientific Laboratory (LASL) Environmental Surveillance Group. Included in the program are routines for gross alpha and beta, 3 H, gross gamma, 90 Sr and alpha spectroscopic determinations. A description of MASTERCALC is presented and its source listing is included. Operating instructions and example computing sessions are given for each type of analysis

Computer code qualification program for the Advanced CANDU Reactor

International Nuclear Information System (INIS)

Popov, N.K.; Wren, D.J.; Snell, V.G.; White, A.J.; Boczar, P.G.

2003-01-01

Atomic Energy of Canada Ltd (AECL) has developed and implemented a Software Quality Assurance program (SQA) to ensure that its analytical, scientific and design computer codes meet the required standards for software used in safety analyses. This paper provides an overview of the computer programs used in Advanced CANDU Reactor (ACR) safety analysis, and assessment of their applicability in the safety analyses of the ACR design. An outline of the incremental validation program, and an overview of the experimental program in support of the code validation are also presented. An outline of the SQA program used to qualify these computer codes is also briefly presented. To provide context to the differences in the SQA with respect to current CANDUs, the paper also provides an overview of the ACR design features that have an impact on the computer code qualification. (author)

Computing Programs for Determining Traffic Flows from Roundabouts

Science.gov (United States)

Boroiu, A. A.; Tabacu, I.; Ene, A.; Neagu, E.; Boroiu, A.

2017-10-01

For modelling road traffic at the level of a road network it is necessary to specify the flows of all traffic currents at each intersection. These data can be obtained by direct measurements at the traffic light intersections, but in the case of a roundabout this is not possible directly and the literature as well as the traffic modelling software doesn’t offer ways to solve this issue. Two sets of formulas are proposed by which all traffic flows from the roundabouts with 3 or 4 arms are calculated based on the streams that can be measured. The objective of this paper is to develop computational programs to operate with these formulas. For each of the two sets of analytical relations, a computational program was developed in the Java operating language. The obtained results fully confirm the applicability of the calculation programs. The final stage for capitalizing these programs will be to make them web pages in HTML format, so that they can be accessed and used on the Internet. The achievements presented in this paper are an important step to provide a necessary tool for traffic modelling because these computational programs can be easily integrated into specialized software.

Computations of concentration of radon and its decay products against time. Computer program; Obliczanie koncentracji radonu i jego produktow rozpadu w funkcji czasu. Program komputerowy

Energy Technology Data Exchange (ETDEWEB)

Machaj, B. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

1996-12-31

This research is aimed to develop a device for continuous monitoring of radon in the air, by measuring alpha activity of radon and its short lived decay products. The influence of alpha activity variation of radon and its daughters on the measured results is of importance and requires a knowledge of this variation with time. Employing the measurement of alpha radiation of radon and of its short lived decay products, require knowledge of radon concentration variation and its decay products against the time. A computer program in Turbo Pascal language was therefore developed performing the computations employing the known relations involved, the program being adapted for IBM PC computers. The presented program enables computation of activity of {sup 222}Rn and its daughter products: {sup 218}Po, {sup 214}Pb, {sup 214}Bi and {sup 214}Po every 1 min within the period of 0-255 min for any state of radiation equilibrium between the radon and its daughter products. The program permits also to compute alpha activity of {sup 222}Rn + {sup 218}Po + {sup 214}Po against time and the total alpha activity at selected interval of time. The results of computations are stored on the computer hard disk in ASCII format and are used a graphic program e.g. by DrawPerfect program to make diagrams. Equations employed for computation of the alpha activity of radon and its decay products as well as the description of program functions are given. (author). 2 refs, 4 figs.

COMPSs-Mobile: parallel programming for mobile-cloud computing

OpenAIRE

Lordan Gomis, Francesc-Josep; Badia Sala, Rosa Maria

2016-01-01

The advent of Cloud and the popularization of mobile devices have led us to a shift in computing access. Computing users will have an interaction display while the real computation will be performed remotely, in the Cloud. COMPSs-Mobile is a framework that aims to ease the development of energy-efficient and high-performing applications for this environment. The framework provides an infrastructure-unaware programming model that allows developers to code regular Android applications that, ...

Automatic control of commercial computer programs

International Nuclear Information System (INIS)

Rezvov, B.A.; Artem'ev, A.N.; Maevskij, A.G.; Demkiv, A.A.; Kirillov, B.F.; Belyaev, A.D.; Artem'ev, N.A.

2010-01-01

The way of automatic control of commercial computer programs is presented. The developed connection of the EXAFS spectrometer automatic system (which is managed by PC for DOS) is taken with the commercial program for the CCD detector control (which is managed by PC for Windows). The described complex system is used for the automation of intermediate amplitude spectra processing in EXAFS spectrum measurements at Kurchatov SR source

Computer Programming Education with Miranda

NARCIS (Netherlands)

Joosten, S.M.M.; van den Berg, Klaas

During the past four years, an experiment has been carried out with an introductory course in computer programming, based on functional programming. This article describes the background of this approach, the aim of the computer programming course, the outline and subject matter of the course parts

Effects of a Teacher Professional Development Program on Science Teachers' Views about Using Computers in Teaching and Learning

Science.gov (United States)

Çetin, Nagihan Imer

2016-01-01

The purpose of this study was to examine science teachers' level of using computers in teaching and the impact of a teacher professional development program (TPDP) on their views regarding utilizing computers in science education. Forty-three in-service science teachers from different regions of Turkey attended a 5 day TPDP. The TPDP was…

Mississippi Curriculum Framework for Computer Information Systems Technology. Computer Information Systems Technology (Program CIP: 52.1201--Management Information Systems & Business Data). Computer Programming (Program CIP: 52.1201). Network Support (Program CIP: 52.1290--Computer Network Support Technology). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for two programs in the state's postsecondary-level computer information systems technology cluster: computer programming and network support. Presented in the introduction are program descriptions and suggested course…

AV Programs for Computer Know-How.

Science.gov (United States)

Mandell, Phyllis Levy

1985-01-01

Lists 44 audiovisual programs (most released between 1983 and 1984) grouped in seven categories: computers in society, introduction to computers, computer operations, languages and programing, computer graphics, robotics, computer careers. Excerpts from "School Library Journal" reviews, price, and intended grade level are included. Names…

Computer Networking Laboratory for Undergraduate Computer Technology Program

National Research Council Canada - National Science Library

Naghedolfeizi, Masoud

2000-01-01

...) To improve the quality of education in the existing courses related to computer networks and data communications as well as other computer science courses such programming languages and computer...

Programming guidelines for computer systems of NPPs

International Nuclear Information System (INIS)

Suresh babu, R.M.; Mahapatra, U.

1999-09-01

Software quality is assured by systematic development and adherence to established standards. All national and international software quality standards have made it mandatory for the software development organisation to produce programming guidelines as part of software documentation. This document contains a set of programming guidelines for detailed design and coding phases of software development cycle. These guidelines help to improve software quality by increasing visibility, verifiability, testability and maintainability. This can be used organisation-wide for various computer systems being developed for our NPPs. This also serves as a guide for reviewers. (author)

Software for the ACP [Advanced Computer Program] multiprocessor system

International Nuclear Information System (INIS)

Biel, J.; Areti, H.; Atac, R.

1987-01-01

Software has been developed for use with the Fermilab Advanced Computer Program (ACP) multiprocessor system. The software was designed to make a system of a hundred independent node processors as easy to use as a single, powerful CPU. Subroutines have been developed by which a user's host program can send data to and get results from the program running in each of his ACP node processors. Utility programs make it easy to compile and link host and node programs, to debug a node program on an ACP development system, and to submit a debugged program to an ACP production system

Development of a computer program for drop time and impact velocity of the rod cluster control assembly

International Nuclear Information System (INIS)

Choi, K.-S.; Yim, J.-S.; Kim, I.-K.; Kim, K.-T.

1993-01-01

In PWR the rod cluster control assembly (RCCA) for shutdown is released upon the action of the control drive mechanism and falls down through the guide thimble by its weight. Drop time and impact velocity of the RCCA are two key parameters with respect to reactivity insertion time and the mechanical integrity of fuel assembly. Therefore, the precise control of the drop time and impact velocity is prerequisite to modifying the existing design features of the RCCA and guide thimble or newly designing them. During its falling down into the core, the RCCA is retarded by various forces acting on it such as flow resistance and friction caused by the RCCA movement, buoyancy mechanical friction caused by contacting inner surface of the guide thimble, etc. However, complicated coupling of the various forces makes it difficult to derive an analytical dynamic equation for the drop time and impact velocity. This paper deals with the development of a computer program containing an analytical dynamic equation applicable to the Korean Fuel Assembly (KOFA) loaded in the Korean nuclear power plants. The computer program is benchmarked with an available single control rod drop tests. Since the predicted values are in good agreements with the test results, the computer program developed in this paper can be employed to modify the existing design features of the RCCA and guide thimble and to develop their new design features for advanced nuclear reactors. (author)

Computing, Information, and Communications Technology (CICT) Program Overview

Science.gov (United States)

VanDalsem, William R.

2003-01-01

The Computing, Information and Communications Technology (CICT) Program's goal is to enable NASA's Scientific Research, Space Exploration, and Aerospace Technology Missions with greater mission assurance, for less cost, with increased science return through the development and use of advanced computing, information and communication technologies

Development of computer assisted learning program using cone beam projection for head radiography

International Nuclear Information System (INIS)

Nakazeko, Kazuma; Araki, Misao; Kajiwara, Hironori; Watanabe, Hiroyuki; Kuwayama, Jun; Karube, Shuhei; Hashimoto, Takeyuki; Shinohara, Hiroyuki

2012-01-01

We present a computer assisted learning (CAL) program to simulate head radiography. The program provides cone beam projections of a target volume, simulating three-dimensional computed tomography (CT) of a head phantom. The generated image is 512 x 512 x 512 pixels with each pixel 0.6 mm on a side. The imaging geometry, such as X-ray tube orientation and phantom orientation, can be varied. The graphical user interface (GUI) of the CAL program allows the study of the effects of varying the imaging geometry; each simulated projection image is shown quickly in an adjoining window. Simulated images with an assigned geometry were compared with the image obtained using the standard geometry in clinical use. The accuracy of the simulated image was verified through comparison with the image acquired using radiography of the head phantom, subsequently processed with a computed radiography system (CR image). Based on correlation coefficient analysis and visual assessment, it was concluded that the CAL program can satisfactorily simulate the CR image. Therefore, it should be useful for the training of head radiography. (author)

The computational physics program of the National MFE Computer Center

International Nuclear Information System (INIS)

Mirin, A.A.

1988-01-01

The principal objective of the Computational Physics Group is to develop advanced numerical models for the investigation of plasma phenomena and the simulation of present and future magnetic confinement devices. Another major objective of the group is to develop efficient algorithms and programming techniques for current and future generation of supercomputers. The computational physics group is involved in several areas of fusion research. One main area is the application of Fokker-Planck/quasilinear codes to tokamaks. Another major area is the investigation of resistive magnetohydrodynamics in three dimensions, with applications to compact toroids. Another major area is the investigation of kinetic instabilities using a 3-D particle code. This work is often coupled with the task of numerically generating equilibria which model experimental devices. Ways to apply statistical closure approximations to study tokamak-edge plasma turbulence are being examined. In addition to these computational physics studies, the group has developed a number of linear systems solvers for general classes of physics problems and has been making a major effort at ascertaining how to efficiently utilize multiprocessor computers

AGRIS: Description of computer programs

International Nuclear Information System (INIS)

Schmid, H.; Schallaboeck, G.

1976-01-01

The set of computer programs used at the AGRIS (Agricultural Information System) Input Unit at the IAEA, Vienna, Austria to process the AGRIS computer-readable data is described. The processing flow is illustrated. The configuration of the IAEA's computer, a list of error messages generated by the computer, the EBCDIC code table extended for AGRIS and INIS, the AGRIS-6 bit code, the work sheet format, and job control listings are included as appendixes. The programs are written for an IBM 370, model 145, operating system OS or VS, and require a 130K partition. The programming languages are PL/1 (F-compiler) and Assembler

Recommended programming practices to facilitate the portability of science computer programs

International Nuclear Information System (INIS)

Anon.

1983-01-01

This standard recommends programming practices to facilitate the portability of computer programs prepared for scientific and engineering computations. These practices are intended to simplify implementation, conversion, and modification of computer programs

Integer programming theory, applications, and computations

CERN Document Server

Taha, Hamdy A

1975-01-01

Integer Programming: Theory, Applications, and Computations provides information pertinent to the theory, applications, and computations of integer programming. This book presents the computational advantages of the various techniques of integer programming.Organized into eight chapters, this book begins with an overview of the general categorization of integer applications and explains the three fundamental techniques of integer programming. This text then explores the concept of implicit enumeration, which is general in a sense that it is applicable to any well-defined binary program. Other

What do reversible programs compute?

DEFF Research Database (Denmark)

Axelsen, Holger Bock; Glück, Robert

2011-01-01

Reversible computing is the study of computation models that exhibit both forward and backward determinism. Understanding the fundamental properties of such models is not only relevant for reversible programming, but has also been found important in other fields, e.g., bidirectional model...... transformation, program transformations such as inversion, and general static prediction of program properties. Historically, work on reversible computing has focussed on reversible simulations of irreversible computations. Here, we take the viewpoint that the property of reversibility itself should...... are not strictly classically universal, but that they support another notion of universality; we call this RTM-universality. Thus, even though the RTMs are sub-universal in the classical sense, they are powerful enough as to include a self-interpreter. Lifting this to other computation models, we propose r...

The Development of an Individualized Instructional Program in Beginning College Mathematics Utilizing Computer Based Resource Units. Final Report.

Science.gov (United States)

Rockhill, Theron D.

Reported is an attempt to develop and evaluate an individualized instructional program in pre-calculus college mathematics. Four computer based resource units were developed in the areas of set theory, relations and function, algebra, trigonometry, and analytic geometry. Objectives were determined by experienced calculus teachers, and…

Development of a computer program to support an efficient non-regression test of a thermal-hydraulic system code

Energy Technology Data Exchange (ETDEWEB)

Lee, Jun Yeob; Jeong, Jae Jun [School of Mechanical Engineering, Pusan National University, Busan (Korea, Republic of); Suh, Jae Seung [System Engineering and Technology Co., Daejeon (Korea, Republic of); Kim, Kyung Doo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

During the development process of a thermal-hydraulic system code, a non-regression test (NRT) must be performed repeatedly in order to prevent software regression. The NRT process, however, is time-consuming and labor-intensive. Thus, automation of this process is an ideal solution. In this study, we have developed a program to support an efficient NRT for the SPACE code and demonstrated its usability. This results in a high degree of efficiency for code development. The program was developed using the Visual Basic for Applications and designed so that it can be easily customized for the NRT of other computer codes.

Automatic Program Development

DEFF Research Database (Denmark)

Automatic Program Development is a tribute to Robert Paige (1947-1999), our accomplished and respected colleague, and moreover our good friend, whose untimely passing was a loss to our academic and research community. We have collected the revised, updated versions of the papers published in his...... honor in the Higher-Order and Symbolic Computation Journal in the years 2003 and 2005. Among them there are two papers by Bob: (i) a retrospective view of his research lines, and (ii) a proposal for future studies in the area of the automatic program derivation. The book also includes some papers...... by members of the IFIP Working Group 2.1 of which Bob was an active member. All papers are related to some of the research interests of Bob and, in particular, to the transformational development of programs and their algorithmic derivation from formal specifications. Automatic Program Development offers...

Computing in Qualitative Analysis: A Healthy Development?

Science.gov (United States)

Richards, Lyn; Richards, Tom

1991-01-01

Discusses the potential impact of computers in qualitative health research. Describes the original goals, design, and implementation of NUDIST, a qualitative computing software. Argues for evaluation of the impact of computer techniques and for an opening of debate among program developers and users to address the purposes and power of computing…

Functional programming for computer vision

Science.gov (United States)

Breuel, Thomas M.

1992-04-01

Functional programming is a style of programming that avoids the use of side effects (like assignment) and uses functions as first class data objects. Compared with imperative programs, functional programs can be parallelized better, and provide better encapsulation, type checking, and abstractions. This is important for building and integrating large vision software systems. In the past, efficiency has been an obstacle to the application of functional programming techniques in computationally intensive areas such as computer vision. We discuss and evaluate several 'functional' data structures for representing efficiently data structures and objects common in computer vision. In particular, we will address: automatic storage allocation and reclamation issues; abstraction of control structures; efficient sequential update of large data structures; representing images as functions; and object-oriented programming. Our experience suggests that functional techniques are feasible for high- performance vision systems, and that a functional approach simplifies the implementation and integration of vision systems greatly. Examples in C++ and SML are given.

Analogy Mapping Development for Learning Programming

Science.gov (United States)

Sukamto, R. A.; Prabawa, H. W.; Kurniawati, S.

2017-02-01

Programming skill is an important skill for computer science students, whereas nowadays, there many computer science students are lack of skills and information technology knowledges in Indonesia. This is contrary with the implementation of the ASEAN Economic Community (AEC) since the end of 2015 which is the qualified worker needed. This study provided an effort for nailing programming skills by mapping program code to visual analogies as learning media. The developed media was based on state machine and compiler principle and was implemented in C programming language. The state of every basic condition in programming were successful determined as analogy visualization.

Energy consumption program: A computer model simulating energy loads in buildings

Science.gov (United States)

Stoller, F. W.; Lansing, F. L.; Chai, V. W.; Higgins, S.

1978-01-01

The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

Radiation and pregnancy: a self-teaching computer program

International Nuclear Information System (INIS)

Kumar, Pratik; Rehani, M.M.

1994-01-01

Two self-interacting computer programs have been developed. The first program which consists of fifteen topics apprises the users with broad spectrum of radiation risks to the unborn during pregnancy and the status of various views in this regard. Another program estimates the dose to uterus in sixteen radiological examinations depending upon the radiographic parameters used. The dose to uterus and hence to the fetus calculated by computer program in different radiographic views have been found to be in agreement with that reported in NRPB-R200 survey report. The two programs combined provide a better understanding of the rather confusing situation regarding dilemma about termination of pregnancy following inadvertent radiation exposure, apprehension about radiation effect in the minds of prescribing doctor and patients, dose estimation and advice to pregnant workers and like. (author). 10 refs

A review of small canned computer programs for survey research and demographic analysis.

Science.gov (United States)

Sinquefield, J C

1976-12-01

A variety of small canned computer programs for survey research and demographic analysis appropriate for use in developing countries are reviewed in this article. The programs discussed are SPSS (Statistical Package for the Social Sciences); CENTS, CO-CENTS, CENTS-AID, CENTS-AIE II; MINI-TAB EDIT, FREQUENCIES, TABLES, REGRESSION, CLIENT RECORD, DATES, MULT, LIFE, and PREGNANCY HISTORY; FIVFIV and SINSIN; DCL (Demographic Computer Library); MINI-TAB Population Projection, Functional Population Projection, and Family Planning Target Projection. A description and evaluation for each program of uses, instruction manuals, computer requirements, and procedures for obtaining manuals and programs are provided. Such information is intended to facilitate and encourage the use of the computer by data processors in developing countries.

ROBOT3: a computer program to calculate the in-pile three-dimensional bowing of cylindrical fuel rods (AWBA Development Program)

International Nuclear Information System (INIS)

Kovscek, S.E.; Martin, S.E.

1982-10-01

ROBOT3 is a FORTRAN computer program which is used in conjunction with the CYGRO5 computer program to calculate the time-dependent inelastic bowing of a fuel rod using an incremental finite element method. The fuel rod is modeled as a viscoelastic beam whose material properties are derived as perturbations of the CYGRO5 axisymmetric model. Fuel rod supports are modeled as displacement, force, or spring-type nodal boundary conditions. The program input is described and a sample problem is given

OpenDx programs for visualization of computational fluid dynamics (CFD) simulations

International Nuclear Information System (INIS)

Silva, Marcelo Mariano da

2008-01-01

The search for high performance and low cost hardware and software solutions always guides the developments performed at the IEN parallel computing laboratory. In this context, this dissertation about the building of programs for visualization of computational fluid dynamics (CFD) simulations using the open source software OpenDx was written. The programs developed are useful to produce videos and images in two or three dimensions. They are interactive, easily to use and were designed to serve fluid dynamics researchers. A detailed description about how this programs were developed and the complete instructions of how to use them was done. The use of OpenDx as development tool is also introduced. There are examples that help the reader to understand how programs can be useful for many applications. (author)

Interactive development of object handling programs

Energy Technology Data Exchange (ETDEWEB)

Gini, G C; Gini, M L

1982-01-01

The authors describe work on development of a software system for writing and testing programs for a computer controlled manipulation. The authors examine in particular how the development of working programs is facilitated by the use of an interactive system based on an interpreter. The paper presents the main features of Pointy the system developed at Stanford Artificial Intelligence Laboratory as a tool for writing assembly programs. The user, interacting with the manipulator, constructs an incremental model of the objects involved in the assembly and develops the corresponding symbolic program. 13 references.

Computer programs for nonlinear algebraic equations

International Nuclear Information System (INIS)

Asaoka, Takumi

1977-10-01

We have provided principal computer subroutines for obtaining numerical solutions of nonlinear algebraic equations through a review of the various methods. Benchmark tests were performed on these subroutines to grasp the characteristics of them compared to the existing subroutines. As computer programs based on the secant method, subroutines of the Muller's method using the Chambers' algorithm were newly developed, in addition to the equipment of subroutines of the Muller's method itself. The programs based on the Muller-Chambers' method are useful especially for low-order polynomials with complex coefficients except for the case of finding the triple roots, three close roots etc. In addition, we have equipped subroutines based on the Madsen's algorithm, a variant of the Newton's method. The subroutines have revealed themselves very useful as standard programs because all the roots are found accurately for every case though they take longer computing time than other subroutines for low-order polynomials. It is shown also that an existing subroutine of the Bairstow's method gives the fastest algorithm for polynomials with complex coefficients, except for the case of finding the triple roots etc. We have provided also subroutines to estimate error bounds for all the roots produced with the various algorithms. (auth.)

A computer program for the pointwise functions generation

International Nuclear Information System (INIS)

Caldeira, Alexandre D.

1995-01-01

A computer program that was developed with the objective of generating pointwise functions, by a combination of tabulated values and/or mathematical expressions, to be used as weighting functions for nuclear data is presented. This simple program can be an important tool for researchers involved in group constants generation. (author). 5 refs, 2 figs

User's manual for computer program BASEPLOT

Science.gov (United States)

Sanders, Curtis L.

2002-01-01

The checking and reviewing of daily records of streamflow within the U.S. Geological Survey is traditionally accomplished by hand-plotting and mentally collating tables of data. The process is time consuming, difficult to standardize, and subject to errors in computation, data entry, and logic. In addition, the presentation of flow data on the internet requires more timely and accurate computation of daily flow records. BASEPLOT was developed for checking and review of primary streamflow records within the U.S. Geological Survey. Use of BASEPLOT enables users to (1) provide efficiencies during the record checking and review process, (2) improve quality control, (3) achieve uniformity of checking and review techniques of simple stage-discharge relations, and (4) provide a tool for teaching streamflow computation techniques. The BASEPLOT program produces tables of quality control checks and produces plots of rating curves and discharge measurements; variable shift (V-shift) diagrams; and V-shifts converted to stage-discharge plots, using data stored in the U.S. Geological Survey Automatic Data Processing System database. In addition, the program plots unit-value hydrographs that show unit-value stages, shifts, and datum corrections; input shifts, datum corrections, and effective dates; discharge measurements; effective dates for rating tables; and numeric quality control checks. Checklist/tutorial forms are provided for reviewers to ensure completeness of review and standardize the review process. The program was written for the U.S. Geological Survey SUN computer using the Statistical Analysis System (SAS) software produced by SAS Institute, Incorporated.

Near-term hybrid vehicle program, phase 1. Appendix B: Design trade-off studies report. Volume 3: Computer program listings

Science.gov (United States)

1979-01-01

A description and listing is presented of two computer programs: Hybrid Vehicle Design Program (HYVELD) and Hybrid Vehicle Simulation Program (HYVEC). Both of the programs are modifications and extensions of similar programs developed as part of the Electric and Hybrid Vehicle System Research and Development Project.

Debugging a high performance computing program

Science.gov (United States)

Gooding, Thomas M.

2013-08-20

Methods, apparatus, and computer program products are disclosed for debugging a high performance computing program by gathering lists of addresses of calling instructions for a plurality of threads of execution of the program, assigning the threads to groups in dependence upon the addresses, and displaying the groups to identify defective threads.

HAMOC: a computer program for fluid hammer analysis

International Nuclear Information System (INIS)

Johnson, H.G.

1975-12-01

A computer program has been developed for fluid hammer analysis of piping systems attached to a vessel which has undergone a known rapid pressure transient. The program is based on the characteristics method for solution of the partial differential equations of motion and continuity. Column separation logic is included for situations in which pressures fall to saturation values

The psychology of computer programming

CERN Document Server

Weinberg, Gerald Marvin

1998-01-01

This landmark 1971 classic is reprinted with a new preface, chapter-by-chapter commentary, and straight-from-the-heart observations on topics that affect the professional life of programmers. Long regarded as one of the first books to pioneer a people-oriented approach to computing, The Psychology of Computer Programming endures as a penetrating analysis of the intelligence, skill, teamwork, and problem-solving power of the computer programmer. Finding the chapters strikingly relevant to today's issues in programming, Gerald M. Weinberg adds new insights and highlights the similarities and differences between now and then. Using a conversational style that invites the reader to join him, Weinberg reunites with some of his most insightful writings on the human side of software engineering. Topics include egoless programming, intelligence, psychological measurement, personality factors, motivation, training, social problems on large projects, problem-solving ability, programming language design, team formati...

Development of Thermal Performance Analysis Computer Program on Turbine Cycle of Yoggwang 3,4 Units

Energy Technology Data Exchange (ETDEWEB)

Hong, S.Y.; Choi, K.H.; Jee, M.H.; Chung, S.I. [Korea Electric Power Research Institute, Taejon (Korea)

2002-07-01

The objective of the study ''Development of Thermal Performance Analysis Computer Program on Turbine Cycle of Yonggwang 3,4 Units'' is to utilize computerized program to the performance test of the turbine cycle or the analysis of the operational status of the thermal plants. In addition, the result can be applicable to the analysis of the thermal output at the abnormal status and be a powerful tool to find out the main problems for such cases. As a results, the output of this study can supply the way to confirm the technical capability to operate the plants efficiently and to obtain the economic gains remarkably. (author). 27 refs., 73 figs., 6 tabs.

Use of computer programs to evaluate effectiveness of security systems

International Nuclear Information System (INIS)

Harris, L. Jr.; Goldman, L.A.; Mc Daniel, T.L.

1987-01-01

Thirty or more computer programs for security vulnerability analysis were developed from 1975 through 1980. Most of these programs are intended for evaluating security system effectiveness against outsider threats, but at least six programs are primarily oriented to insider threats. Some strengths and weaknesses of these programs are described. Six of these programs, four for outsider threats and two for insider threats, have been revised and adapted for use with IBM personal computers. The vulnerability analysis process is discussed with emphasis on data collection. The difference between design data and operational data is described. For performance-type operational data, such as detection probabilities and barrier delay times, the difference between unstressed and stressed performance data is discussed. Stressed performance data correspond to situations where an adversary attempts to weaken a security system by mitigating certain security measures. Suggestions are made on the combined use of manual analysis and computer analysis

GUI program to compute probabilistic seismic hazard analysis

International Nuclear Information System (INIS)

Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

2005-12-01

The first stage of development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface (GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The first part has developed and others are developing now in this term. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within the limits of the possibility

Scientific Computing in the CH Programming Language

Directory of Open Access Journals (Sweden)

Harry H. Cheng

1993-01-01

Full Text Available We have developed a general-purpose block-structured interpretive programming Ianguage. The syntax and semantics of this language called CH are similar to C. CH retains most features of C from the scientific computing point of view. In this paper, the extension of C to CH for numerical computation of real numbers will be described. Metanumbers of −0.0, 0.0, Inf, −Inf, and NaN are introduced in CH. Through these metanumbers, the power of the IEEE 754 arithmetic standard is easily available to the programmer. These metanumbers are extended to commonly used mathematical functions in the spirit of the IEEE 754 standard and ANSI C. The definitions for manipulation of these metanumbers in I/O; arithmetic, relational, and logic operations; and built-in polymorphic mathematical functions are defined. The capabilities of bitwise, assignment, address and indirection, increment and decrement, as well as type conversion operations in ANSI C are extended in CH. In this paper, mainly new linguistic features of CH in comparison to C will be described. Example programs programmed in CH with metanumbers and polymorphic mathematical functions will demonstrate capabilities of CH in scientific computing.

Computer-based Programs in Speech Therapy of Dyslalia and Dyslexia- Dysgraphia

Directory of Open Access Journals (Sweden)

Mirela Danubianu

2010-04-01

Full Text Available During the last years, the researchers and therapists in speech therapy have been more and more concerned with the elaboration and use of computer programs in speech disorders therapy. The main objective of this study was to evaluate the therapeutic effectiveness of computer-based programs for the Romanian language in speech therapy. Along the study, we will present the experimental research through assessing the effectiveness of computer programs in the speech therapy for speech disorders: dyslalia, dyslexia and dysgraphia. Methodologically, the use of the computer in the therapeutic phases was carried out with the help of some computer-based programs (Logomon, Dislex-Test etc. that we elaborated and we experimented with during several years of therapeutic activity. The sample used in our experiments was composed of 120 subjects; two groups of 60 children with speech disorders were selected for both speech disorders: 30 for the experimental ('computer-based' group and 30 for the control ('classical method' group. The study hypotheses verified whether the results, obtained by the subjects within the experimental group, improved significantly after using the computer-based program, compared to the subjects within the control group, who did not use this program but got a classical therapy. The hypotheses were confirmed for the speech disorders included in this research; the conclusions of the study confirm the advantages of using computer-based programs within speech therapy by correcting these disorders, as well as due to the positive influence these programs have on the development of children’s personality.

Recent developments of the NESSUS probabilistic structural analysis computer program

Science.gov (United States)

Millwater, H.; Wu, Y.-T.; Torng, T.; Thacker, B.; Riha, D.; Leung, C. P.

1992-01-01

The NESSUS probabilistic structural analysis computer program combines state-of-the-art probabilistic algorithms with general purpose structural analysis methods to compute the probabilistic response and the reliability of engineering structures. Uncertainty in loading, material properties, geometry, boundary conditions and initial conditions can be simulated. The structural analysis methods include nonlinear finite element and boundary element methods. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. The scope of the code has recently been expanded to include probabilistic life and fatigue prediction of structures in terms of component and system reliability and risk analysis of structures considering cost of failure. The code is currently being extended to structural reliability considering progressive crack propagation. Several examples are presented to demonstrate the new capabilities.

The Application of Visual Basic Computer Programming Language to Simulate Numerical Iterations

Directory of Open Access Journals (Sweden)

Abdulkadir Baba HASSAN

2006-06-01

Full Text Available This paper examines the application of Visual Basic Computer Programming Language to Simulate Numerical Iterations, the merit of Visual Basic as a Programming Language and the difficulties faced when solving numerical iterations analytically, this research paper encourage the uses of Computer Programming methods for the execution of numerical iterations and finally fashion out and develop a reliable solution using Visual Basic package to write a program for some selected iteration problems.

Development of parallel/serial program analyzing tool

International Nuclear Information System (INIS)

Watanabe, Hiroshi; Nagao, Saichi; Takigawa, Yoshio; Kumakura, Toshimasa

1999-03-01

Japan Atomic Energy Research Institute has been developing 'KMtool', a parallel/serial program analyzing tool, in order to promote the parallelization of the science and engineering computation program. KMtool analyzes the performance of program written by FORTRAN77 and MPI, and it reduces the effort for parallelization. This paper describes development purpose, design, utilization and evaluation of KMtool. (author)

Permitted decompilation of a computer program in order to protect the general interest

Directory of Open Access Journals (Sweden)

Radovanović Sanja M.

2015-01-01

Full Text Available Computer program is an intellectual creation protected by copyright. However, unlike other items with equivalent legal protection, a computer program has a strong technical functionality, which is, in nowadays' society, an indispensable factor in everyday business activities, exchange of information, entertainment or achieving other similar purposes. Precisely because of this feature, computer program can rarely be seen in isolation from the hardware and software environment. In other words, the functionality of a computer program reaches its full scope only in interaction with other computer program or device. Bearing in mind the fact that this intellectual creation is in the focus of technological, and thus social, development, legislators are trying to provide a legal framework in which these interactions take place unhindered. In fact, considering that each aspect of the use of a computer program presents the exclusive right of the author, relying on his or her consent to undertake certain perpetration which would provide the necessary connectivity of the various components, could put in risk further technological development. Therefore, the lawmakers provide that, in certain cases and under certain conditions, the author's exclusive right could be restricted or excluded. This paper aims to analyze a normative contribution in achieving, technical and technological needed, and therefore, in terms of general interest justified, interactions.

Contributions to computational stereology and parallel programming

DEFF Research Database (Denmark)

Rasmusson, Allan

rotator, even without the need for isotropic sections. To meet the need for computational power to perform image restoration of virtual tissue sections, parallel programming on GPUs has also been part of the project. This has lead to a significant change in paradigm for a previously developed surgical...

Utilization of logistic computer programs in the power plant piping industry

International Nuclear Information System (INIS)

Motzel, E.

1982-01-01

Starting from the general situation of the power plant piping industry, the utilization of computer programs as well as the specific magnitude of complexity connected with the project realisation, the necessity for using logistic computer programs especially in case of nuclear power plants is explained. The logistic term as well as the logistic data are described. At the example of the nuclear power plant KRB II, Gundremmingen, Block B/C the practical use of such programs is shown. The planning, scheduling and supervision is carried out computer-aided by means of network-technique. The material management, prefabrication, installation including management of certificates for welding and testing activities is planned and controlled by computer programs as well. With the piping systems installed a complete erection work documentation is available which also serves as base for the billing versus the client. The budgeted costs are continuously controlled by means of a cost control program. Summing-up the further development in controlling piping contracts computer-supported is described with regard to software, hardware and the organisation structure. Furthermore the concept of a self-supporting field computer is introduced for the first time. (orig.) [de

Finite Volume Based Computer Program for Ground Source Heat Pump System

Energy Technology Data Exchange (ETDEWEB)

Menart, James A. [Wright State University

2013-02-22

This report is a compilation of the work that has been done on the grant DE-EE0002805 entitled ?Finite Volume Based Computer Program for Ground Source Heat Pump Systems.? The goal of this project was to develop a detailed computer simulation tool for GSHP (ground source heat pump) heating and cooling systems. Two such tools were developed as part of this DOE (Department of Energy) grant; the first is a two-dimensional computer program called GEO2D and the second is a three-dimensional computer program called GEO3D. Both of these simulation tools provide an extensive array of results to the user. A unique aspect of both these simulation tools is the complete temperature profile information calculated and presented. Complete temperature profiles throughout the ground, casing, tube wall, and fluid are provided as a function of time. The fluid temperatures from and to the heat pump, as a function of time, are also provided. In addition to temperature information, detailed heat rate information at several locations as a function of time is determined. Heat rates between the heat pump and the building indoor environment, between the working fluid and the heat pump, and between the working fluid and the ground are computed. The heat rates between the ground and the working fluid are calculated as a function time and position along the ground loop. The heating and cooling loads of the building being fitted with a GSHP are determined with the computer program developed by DOE called ENERGYPLUS. Lastly COP (coefficient of performance) results as a function of time are provided. Both the two-dimensional and three-dimensional computer programs developed as part of this work are based upon a detailed finite volume solution of the energy equation for the ground and ground loop. Real heat pump characteristics are entered into the program and used to model the heat pump performance. Thus these computer tools simulate the coupled performance of the ground loop and the heat pump

Computer program for automatic generation of BWR control rod patterns

International Nuclear Information System (INIS)

Taner, M.S.; Levine, S.H.; Hsia, M.Y.

1990-01-01

A computer program named OCTOPUS has been developed to automatically determine a control rod pattern that approximates some desired target power distribution as closely as possible without violating any thermal safety or reactor criticality constraints. The program OCTOPUS performs a semi-optimization task based on the method of approximation programming (MAP) to develop control rod patterns. The SIMULATE-E code is used to determine the nucleonic characteristics of the reactor core state

Development of point Kernel radiation shielding analysis computer program implementing recent nuclear data and graphic user interfaces

International Nuclear Information System (INIS)

Kang, S.; Lee, S.; Chung, C.

2002-01-01

There is an increasing demand for safe and efficient use of radiation and radioactive work activity along with shielding analysis as a result the number of nuclear and conventional facilities using radiation or radioisotope rises. Most Korean industries and research institutes including Korea Power Engineering Company (KOPEC) have been using foreign computer programs for radiation shielding analysis. Korean nuclear regulations have introduced new laws regarding the dose limits and radiological guides as prescribed in the ICRP 60. Thus, the radiation facilities should be designed and operated to comply with these new regulations. In addition, the previous point kernel shielding computer code utilizes antiquated nuclear data (mass attenuation coefficient, buildup factor, etc) which were developed in 1950∼1960. Subsequently, the various nuclear data such mass attenuation coefficient, buildup factor, etc. have been updated during the past few decades. KOPEC's strategic directive is to become a self-sufficient and independent nuclear design technology company, thus KOPEC decided to develop a new radiation shielding computer program that included the latest regulatory requirements and updated nuclear data. This new code was designed by KOPEC with developmental cooperation with Hanyang University, Department of Nuclear Engineering. VisualShield is designed with a graphical user interface to allow even users unfamiliar to radiation shielding theory to proficiently prepare input data sets and analyzing output results

The ACP [Advanced Computer Program] multiprocessor system at Fermilab

International Nuclear Information System (INIS)

Nash, T.; Areti, H.; Atac, R.

1986-09-01

The Advanced Computer Program at Fermilab has developed a multiprocessor system which is easy to use and uniquely cost effective for many high energy physics problems. The system is based on single board computers which cost under $2000 each to build including 2 Mbytes of on board memory. These standard VME modules each run experiment reconstruction code in Fortran at speeds approaching that of a VAX 11/780. Two versions have been developed: one uses Motorola's 68020 32 bit microprocessor, the other runs with AT and T's 32100. both include the corresponding floating point coprocessor chip. The first system, when fully configured, uses 70 each of the two types of processors. A 53 processor system has been operated for several months with essentially no down time by computer operators in the Fermilab Computer Center, performing at nearly the capacity of 6 CDC Cyber 175 mainframe computers. The VME crates in which the processing ''nodes'' sit are connected via a high speed ''Branch Bus'' to one or more MicroVAX computers which act as hosts handling system resource management and all I/O in offline applications. An interface from Fastbus to the Branch Bus has been developed for online use which has been tested error free at 20 Mbytes/sec for 48 hours. ACP hardware modules are now available commercially. A major package of software, including a simulator that runs on any VAX, has been developed. It allows easy migration of existing programs to this multiprocessor environment. This paper describes the ACP Multiprocessor System and early experience with it at Fermilab and elsewhere

Computer code development plant for SMART design

International Nuclear Information System (INIS)

Bae, Kyoo Hwan; Choi, S.; Cho, B.H.; Kim, K.K.; Lee, J.C.; Kim, J.P.; Kim, J.H.; Chung, M.; Kang, D.J.; Chang, M.H.

1999-03-01

In accordance with the localization plan for the nuclear reactor design driven since the middle of 1980s, various computer codes have been transferred into the korea nuclear industry through the technical transfer program from the worldwide major pressurized water reactor supplier or through the international code development program. These computer codes have been successfully utilized in reactor and reload core design works. As the results, design- related technologies have been satisfactorily accumulated. However, the activities for the native code development activities to substitute the some important computer codes of which usages are limited by the original technique owners have been carried out rather poorly. Thus, it is most preferentially required to secure the native techniques on the computer code package and analysis methodology in order to establish the capability required for the independent design of our own model of reactor. Moreover, differently from the large capacity loop-type commercial reactors, SMART (SYSTEM-integrated Modular Advanced ReacTor) design adopts a single reactor pressure vessel containing the major primary components and has peculiar design characteristics such as self-controlled gas pressurizer, helical steam generator, passive residual heat removal system, etc. Considering those peculiar design characteristics for SMART, part of design can be performed with the computer codes used for the loop-type commercial reactor design. However, most of those computer codes are not directly applicable to the design of an integral reactor such as SMART. Thus, they should be modified to deal with the peculiar design characteristics of SMART. In addition to the modification efforts, various codes should be developed in several design area. Furthermore, modified or newly developed codes should be verified their reliability through the benchmarking or the test for the object design. Thus, it is necessary to proceed the design according to the

Computer code development plant for SMART design

Energy Technology Data Exchange (ETDEWEB)

Bae, Kyoo Hwan; Choi, S.; Cho, B.H.; Kim, K.K.; Lee, J.C.; Kim, J.P.; Kim, J.H.; Chung, M.; Kang, D.J.; Chang, M.H

1999-03-01

In accordance with the localization plan for the nuclear reactor design driven since the middle of 1980s, various computer codes have been transferred into the korea nuclear industry through the technical transfer program from the worldwide major pressurized water reactor supplier or through the international code development program. These computer codes have been successfully utilized in reactor and reload core design works. As the results, design- related technologies have been satisfactorily accumulated. However, the activities for the native code development activities to substitute the some important computer codes of which usages are limited by the original technique owners have been carried out rather poorly. Thus, it is most preferentially required to secure the native techniques on the computer code package and analysis methodology in order to establish the capability required for the independent design of our own model of reactor. Moreover, differently from the large capacity loop-type commercial reactors, SMART (SYSTEM-integrated Modular Advanced ReacTor) design adopts a single reactor pressure vessel containing the major primary components and has peculiar design characteristics such as self-controlled gas pressurizer, helical steam generator, passive residual heat removal system, etc. Considering those peculiar design characteristics for SMART, part of design can be performed with the computer codes used for the loop-type commercial reactor design. However, most of those computer codes are not directly applicable to the design of an integral reactor such as SMART. Thus, they should be modified to deal with the peculiar design characteristics of SMART. In addition to the modification efforts, various codes should be developed in several design area. Furthermore, modified or newly developed codes should be verified their reliability through the benchmarking or the test for the object design. Thus, it is necessary to proceed the design according to the

Computer program for afterheat temperature distribution for mobile nuclear power plant

Science.gov (United States)

Parker, W. G.; Vanbibber, L. E.

1972-01-01

ESATA computer program was developed to analyze thermal safety aspects of post-impacted mobile nuclear power plants. Program is written in FORTRAN 4 and designed for IBM 7094/7044 direct coupled system.

Enhancing instruction in Fuels and Combustion Laboratory via a developed computer-assisted program for establishing efficient coal-diesel oil mixture (CDOM) fuel proportions

Energy Technology Data Exchange (ETDEWEB)

Maglaya, A.B. [La Salle University, Manila (Philippines). Dept. of Mechanical Engineering

2004-07-01

This paper discusses the relevance of digital computation in Fuels and Combustion Laboratory experiments used by the senior students of the Department of Mechanical Engineering, De La Salle University-Manila, Philippines. One of the students' experiments involved the determination of the most efficient CDOM fuel proportion as alternative fuel to diesel oil for steam generators and other industrial applications. Theoretical calculations show that it requires tedious and repetitive computations. A computer-assisted program was developed to lessen the time-consuming activities. The formulation of algorithms were based on the system of equations of the heat interaction between the CDOM fuel, combustion air and products of combustion and by applying the principles of mass and energy equations (or the First Law of Thermodynamics) for reacting systems were utilized. The developed computer-assisted program output verified alternative fuel selected through actual experimentation.

Development of methodology and computer programs for the ground response spectrum and the probabilistic seismic hazard analysis

Energy Technology Data Exchange (ETDEWEB)

Kim, Joon Kyoung [Semyung Univ., Research Institute of Industrial Science and Technol , Jecheon (Korea, Republic of)

1996-12-15

Objective of this study is to investigate and develop the methodologies and corresponding computer codes, compatible to the domestic seismological and geological environments, for estimating ground response spectrum and probabilistic seismic hazard. Using the PSHA computer program, the Cumulative Probability Functions(CPDF) and Probability Functions (PDF) of the annual exceedence have been investigated for the analysis of the uncertainty space of the annual probability at ten interested seismic hazard levels (0.1 g to 0.99 g). The cumulative provability functions and provability functions of the annual exceedence have been also compared to those results from the different input parameter spaces.

Evaluation of four building energy analysis computer programs against ASHRAE standard 140-2007

CSIR Research Space (South Africa)

Szewczuk, S

2014-08-01

Full Text Available ) standard or code of practice. Agrément requested the CSIR to evaluate a range of building energy simulation computer programs. The standard against which these computer programs were to be evaluated was developed by the American Society of Heating...

Analysis of computer programming languages

International Nuclear Information System (INIS)

Risset, Claude Alain

1967-01-01

This research thesis aims at trying to identify some methods of syntax analysis which can be used for computer programming languages while putting aside computer devices which influence the choice of the programming language and methods of analysis and compilation. In a first part, the author proposes attempts of formalization of Chomsky grammar languages. In a second part, he studies analytical grammars, and then studies a compiler or analytic grammar for the Fortran language

Creating the computer player: an engaging and collaborative approach to introduce computational thinking by combining ‘unplugged’ activities with visual programming

Directory of Open Access Journals (Sweden)

Anna Gardeli

2017-11-01

Full Text Available Ongoing research is being conducted on appropriate course design, practices and teacher interventions for improving the efficiency of computer science and programming courses in K-12 education. The trend is towards a more constructivist problem-based learning approach. Computational thinking, which refers to formulating and solving problems in a form that can be efficiently processed by a computer, raises an important educational challenge. Our research aims to explore possible ways of enriching computer science teaching with a focus on development of computational thinking. We have prepared and evaluated a learning intervention for introducing computer programming to children between 10 and 14 years old; this involves students working in groups to program the behavior of the computer player of a well-known game. The programming process is split into two parts. First, students design a high-level version of their algorithm during an ‘unplugged’ pen & paper phase, and then they encode their solution as an executable program in a visual programming environment. Encouraging evaluation results have been achieved regarding the educational and motivational value of the proposed approach.

A computer program for scanning transmission ion microscopy simulation

International Nuclear Information System (INIS)

Wu, R.; Shen, H.; Mi, Y.; Sun, M.D.; Yang, M.J.

2005-01-01

With the installation of the Scanning Proton Microprobe system at Fudan University, we are in the process of developing a three-dimension reconstruction technique based on scanning transmission ion microscopy-computed tomography (STIM-CT). As the first step, a related computer program of STIM simulation has been established. This program is written in the Visual C++[reg], using the technique of OOP (Object Oriented Programming) and it is a standard multiple-document Windows[reg] program. It can be run with all MS Windows[reg] operating systems. The operating mode is the menu mode, using a multiple process technique. The stopping power theory is based on the Bethe-Bloch formula. In order to simplify the calculation, the improved cylindrical coordinate model was introduced in the program instead of a usual spherical or cylindrical coordinate model. The simulated results of a sample at several rotation angles are presented

Preschool Cookbook of Computer Programming Topics

Science.gov (United States)

Morgado, Leonel; Cruz, Maria; Kahn, Ken

2010-01-01

A common problem in computer programming use for education in general, not simply as a technical skill, is that children and teachers find themselves constrained by what is possible through limited expertise in computer programming techniques. This is particularly noticeable at the preliterate level, where constructs tend to be limited to…

Using Python as a first programming environment for computational physics in developing countries

Science.gov (United States)

Akpojotor, Godfrey; Ehwerhemuepha, Louis; Echenim, Myron; Akpojotor, Famous

2011-03-01

Python unique features such its interpretative, multiplatform and object oriented nature as well as being a free and open source software creates the possibility that any user connected to the internet can download the entire package into any platform, install it and immediately begin to use it. Thus Python is gaining reputation as a preferred environment for introducing students and new beginners to programming. Therefore in Africa, the Python African Tour project has been launched and we are coordinating its use in computational science. We examine here the challenges and prospects of using Python for computational physics (CP) education in developing countries (DC). Then we present our project on using Python to simulate and aid the learning of laboratory experiments illustrated here by modeling of the simple pendulum and also to visualize phenomena in physics illustrated here by demonstrating the wave motion of a particle in a varying potential. This project which is to train both the teachers and our students on CP using Python can easily be adopted in other DC.

SALP-PC, a computer program for fault tree analysis on personal computers

International Nuclear Information System (INIS)

Contini, S.; Poucet, A.

1987-01-01

The paper presents the main characteristics of the SALP-PC computer code for fault tree analysis. The program has been developed in Fortran 77 on an Olivetti M24 personal computer (IBM compatible) in order to reach a high degree of portability. It is composed of six processors implementing the different phases of the analysis procedure. This particular structure presents some advantages like, for instance, the restart facility and the possibility to develop an event tree analysis code. The set of allowed logical operators, i.e. AND, OR, NOT, K/N, XOR, INH, together with the possibility to define boundary conditions, make the SALP-PC code a powerful tool for risk assessment. (orig.)

Interactive house investigation and radon diagnostics computer program

International Nuclear Information System (INIS)

Gillette, L.M.

1990-01-01

This paper reports on the interactive computer program called Dungeons and Radon which was developed as part of the Environmental Protection Agency's (EPA's) Radon Contractor Proficiency (RCP) Program's Radon Technology for Mitigators (RTM) course which is currently being offered in the Regional Radon Training Centers (RRTCs). The program was designed by Terry Brennan to be used in training radon mitigation contractors. The Macintosh based program consists of a series of animated, sound and voice enhanced house scenes. The participants choose where and what to investigate and where to perform diagnostic tests in order to gather enough information to design a successful mitigation system

VTGRAPH:Computer graphics program using ReGIS mode

International Nuclear Information System (INIS)

Benamar, M.A.; Benouali, N.; Tchantchane, A.; Azbouche, A.; Tobbeche, S. Centre de Developpement des Techniques Nucleaires, Laboratoire des Techniques Nucleaires, Algiers

1993-02-01

A computer graphics program has been developed for plotting spectra generated from different nuclear analysis techniques and discrete data for the VT240 graphics and compatible IBM PC using ST240 configuration. We have used the Remote Graphics Instruction Set (ReGIS) commands

The ISCB Student Council Internship Program: Expanding computational biology capacity worldwide.

Science.gov (United States)

Anupama, Jigisha; Francescatto, Margherita; Rahman, Farzana; Fatima, Nazeefa; DeBlasio, Dan; Shanmugam, Avinash Kumar; Satagopam, Venkata; Santos, Alberto; Kolekar, Pandurang; Michaut, Magali; Guney, Emre

2018-01-01

Education and training are two essential ingredients for a successful career. On one hand, universities provide students a curriculum for specializing in one's field of study, and on the other, internships complement coursework and provide invaluable training experience for a fruitful career. Consequently, undergraduates and graduates are encouraged to undertake an internship during the course of their degree. The opportunity to explore one's research interests in the early stages of their education is important for students because it improves their skill set and gives their career a boost. In the long term, this helps to close the gap between skills and employability among students across the globe and balance the research capacity in the field of computational biology. However, training opportunities are often scarce for computational biology students, particularly for those who reside in less-privileged regions. Aimed at helping students develop research and academic skills in computational biology and alleviating the divide across countries, the Student Council of the International Society for Computational Biology introduced its Internship Program in 2009. The Internship Program is committed to providing access to computational biology training, especially for students from developing regions, and improving competencies in the field. Here, we present how the Internship Program works and the impact of the internship opportunities so far, along with the challenges associated with this program.

The ISCB Student Council Internship Program: Expanding computational biology capacity worldwide.

Directory of Open Access Journals (Sweden)

Jigisha Anupama

2018-01-01

Full Text Available Education and training are two essential ingredients for a successful career. On one hand, universities provide students a curriculum for specializing in one's field of study, and on the other, internships complement coursework and provide invaluable training experience for a fruitful career. Consequently, undergraduates and graduates are encouraged to undertake an internship during the course of their degree. The opportunity to explore one's research interests in the early stages of their education is important for students because it improves their skill set and gives their career a boost. In the long term, this helps to close the gap between skills and employability among students across the globe and balance the research capacity in the field of computational biology. However, training opportunities are often scarce for computational biology students, particularly for those who reside in less-privileged regions. Aimed at helping students develop research and academic skills in computational biology and alleviating the divide across countries, the Student Council of the International Society for Computational Biology introduced its Internship Program in 2009. The Internship Program is committed to providing access to computational biology training, especially for students from developing regions, and improving competencies in the field. Here, we present how the Internship Program works and the impact of the internship opportunities so far, along with the challenges associated with this program.

Computer Tutorial Programs in Physics.

Science.gov (United States)

Faughn, Jerry; Kuhn, Karl

1979-01-01

Describes a series of computer tutorial programs which are intended to help college students in introductory physics courses. Information about these programs, which are either calculus or algebra-trig based, is presented. (HM)

Employing subgoals in computer programming education

Science.gov (United States)

Margulieux, Lauren E.; Catrambone, Richard; Guzdial, Mark

2016-01-01

The rapid integration of technology into our professional and personal lives has left many education systems ill-equipped to deal with the influx of people seeking computing education. To improve computing education, we are applying techniques that have been developed for other procedural fields. The present study applied such a technique, subgoal labeled worked examples, to explore whether it would improve programming instruction. The first two experiments, conducted in a laboratory, suggest that the intervention improves undergraduate learners' problem-solving performance and affects how learners approach problem-solving. The third experiment demonstrates that the intervention has similar, and perhaps stronger, effects in an online learning environment with in-service K-12 teachers who want to become qualified to teach computing courses. By implementing this subgoal intervention as a tool for educators to teach themselves and their students, education systems could improve computing education and better prepare learners for an increasingly technical world.

Pair Programming as a Modern Method of Teaching Computer Science

Directory of Open Access Journals (Sweden)

Irena Nančovska Šerbec

2008-10-01

Full Text Available At the Faculty of Education, University of Ljubljana we educate future computer science teachers. Beside didactical, pedagogical, mathematical and other interdisciplinary knowledge, students gain knowledge and skills of programming that are crucial for computer science teachers. For all courses, the main emphasis is the absorption of professional competences, related to the teaching profession and the programming profile. The latter are selected according to the well-known document, the ACM Computing Curricula. The professional knowledge is therefore associated and combined with the teaching knowledge and skills. In the paper we present how to achieve competences related to programming by using different didactical models (semiotic ladder, cognitive objectives taxonomy, problem solving and modern teaching method “pair programming”. Pair programming differs from standard methods (individual work, seminars, projects etc.. It belongs to the extreme programming as a discipline of software development and is known to have positive effects on teaching first programming language. We have experimentally observed pair programming in the introductory programming course. The paper presents and analyzes the results of using this method: the aspects of satisfaction during programming and the level of gained knowledge. The results are in general positive and demonstrate the promising usage of this teaching method.

A computer program for activation analysis

International Nuclear Information System (INIS)

Rantanen, J.; Rosenberg, R.J.

1983-01-01

A computer program for calculating the results of activation analysis is described. The program comprises two gamma spectrum analysis programs, STOAV and SAMPO and one program for calculating elemental concentrations, KVANT. STOAV is based on a simple summation of channels and SAMPO is based on fitting of mathematical functions. The programs are tested by analyzing the IAEA G-1 test spectra. In the determination of peak location SAMPO is somewhat better than STOAV and in the determination of peak area SAMPO is more than twice as accurate as STOAV. On the other hand, SAMPO is three times as expensive as STOAV with the use of a Cyber 170 computer. (author)

32 CFR 701.125 - Computer matching program.

Science.gov (United States)

2010-07-01

... counterintelligence matches done in the course of performing a background check for security clearances of Federal... 32 National Defense 5 2010-07-01 2010-07-01 false Computer matching program. 701.125 Section 701... OF THE NAVY DOCUMENTS AFFECTING THE PUBLIC DON Privacy Program § 701.125 Computer matching program...

Mathematical models and algorithms for the computer program 'WOLF'

International Nuclear Information System (INIS)

Halbach, K.

1975-12-01

The computer program FLOW finds the nonrelativistic self- consistent set of two-dimensional ion trajectories and electric fields (including space charges from ions and electrons) for a given set of initial and boundary conditions for the particles and fields. The combination of FLOW with the optimization code PISA gives the program WOLF, which finds the shape of the emitter which is consistent with the plasma forming it, and in addition varies physical characteristics such as electrode position, shapes, and potentials so that some performance characteristics are optimized. The motivation for developing these programs was the desire to design optimum ion source extractor/accelerator systems in a systematic fashion. The purpose of this report is to explain and derive the mathematical models and algorithms which approximate the real physical processes. It serves primarily to document the computer programs. 10 figures

Computer program for optimal BWR congtrol rod programming

International Nuclear Information System (INIS)

Taner, M.S.; Levine, S.H.; Carmody, J.M.

1995-01-01

A fully automated computer program has been developed for designing optimal control rod (CR) patterns for boiling water reactors (BWRs). The new program, called OCTOPUS-3, is based on the OCTOPUS code and employs SIMULATE-3 (Ref. 2) for the analysis. There are three aspects of OCTOPUS-3 that make it successful for use at PECO Energy. It incorporates a new feasibility algorithm that makes the CR design meet all constraints, it has been coupled to a Bourne Shell program 3 to allow the user to run the code interactively without the need for a manual, and it develops a low axial peak to extend the cycle. For PECO Energy Co.'s limericks it increased the energy output by 1 to 2% over the traditional PECO Energy design. The objective of the optimization in OCTOPUS-3 is to approximate a very low axial peaked target power distribution while maintaining criticality, keeping the nodal and assembly peaks below the allowed maximum, and meeting the other constraints. The user-specified input for each exposure point includes: CR groups allowed-to-move, target k eff , and amount of core flow. The OCTOPUS-3 code uses the CR pattern from the previous step as the initial guess unless indicated otherwise

The ACP (Advanced Computer Program) multiprocessor system at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Nash, T.; Areti, H.; Atac, R.; Biel, J.; Case, G.; Cook, A.; Fischler, M.; Gaines, I.; Hance, R.; Husby, D.

1986-09-01

The Advanced Computer Program at Fermilab has developed a multiprocessor system which is easy to use and uniquely cost effective for many high energy physics problems. The system is based on single board computers which cost under $2000 each to build including 2 Mbytes of on board memory. These standard VME modules each run experiment reconstruction code in Fortran at speeds approaching that of a VAX 11/780. Two versions have been developed: one uses Motorola's 68020 32 bit microprocessor, the other runs with AT and T's 32100. both include the corresponding floating point coprocessor chip. The first system, when fully configured, uses 70 each of the two types of processors. A 53 processor system has been operated for several months with essentially no down time by computer operators in the Fermilab Computer Center, performing at nearly the capacity of 6 CDC Cyber 175 mainframe computers. The VME crates in which the processing ''nodes'' sit are connected via a high speed ''Branch Bus'' to one or more MicroVAX computers which act as hosts handling system resource management and all I/O in offline applications. An interface from Fastbus to the Branch Bus has been developed for online use which has been tested error free at 20 Mbytes/sec for 48 hours. ACP hardware modules are now available commercially. A major package of software, including a simulator that runs on any VAX, has been developed. It allows easy migration of existing programs to this multiprocessor environment. This paper describes the ACP Multiprocessor System and early experience with it at Fermilab and elsewhere.

The computer program system for structural design of nuclear power plants

International Nuclear Information System (INIS)

Aihara, S.; Atsumi, K.; Sasagawa, K.; Satoh, S.

1979-01-01

In recent days, the design method of the Nuclear Power Plant has become more complex than in the past. The Finite Element Method (FEM) applied for analysis of Nuclear Power Plants, especially requires more computer use. The recent computers have made remarkable progress, so that in design work manpower and time necessary for analysis have been reduced considerably. However, instead the arrangement of outputs have increased tremendously. Therefore, a computer program system was developed for performing all of the processes, from data making to output arrangement, and rebar evaluations. This report introduces the computer program system pertaining to the design flow of the Reactor Building. (orig.)

Computer programs for TRIGA calibration, burnup evaluation, and bookkeeping

International Nuclear Information System (INIS)

Nelson, George W.

1978-01-01

Several computer programs have been developed at the University of Arizona to assist the direction and operation of the TRIGA Reactor Laboratory. The programs fall into the following three categories: 1. Programs for calculation of burnup of each fuel element in the reactor core, for maintaining an inventory of fuel element location and fissile content at any time, and for evaluation of the reactivity effects of burnup or proposed fuel element rearrangement in the core. 2. Programs for evaluation, function fitting, and tabulation of control rod measurements. 3. Bookkeeping programs to summarize and tabulate reactor runs and irradiations according to time, energy release, purpose, responsible party, etc. These summarized data are reported in an annual operating report for the facility. The use of these programs has saved innumerable hours of repetitious work, assuring more accurate, objective results, and requiring a minimum of effort to repeat calculations when input data are modified. The programs are written in FORTRAN-IV, and have been used on a CDC-6400 computer. (author)

Reactor safety computer code development at INEL

International Nuclear Information System (INIS)

Johnsen, G.W.

1985-01-01

This report provides a brief overview of the computer code development programs being conducted at EG and G Idaho, Inc. on behalf of US Nuclear Regulatory Commission and the Department of Energy, Idaho Operations Office. Included are descriptions of the codes being developed, their development status as of the date of this report, and resident code development expertise

ITAC, an insider threat assessment computer program

International Nuclear Information System (INIS)

Eggers, R.F.; Giese, E.W.

1988-01-01

The insider threat assessment computer program, ITAC, is used to evaluate the vulnerability of nuclear material processing facilities to theft of special nuclear material by one or more authorized insider adversaries. The program includes two main parts: one is used to determine the timeliness of nuclear material accounting tests for loss of special nuclear material, and the other determines pathway aggregate detection probabilities for physical protection systems and material control procedures that could detect the theft. Useful features of ITAC include its ability to (1) evaluate and quantify the timeliness of material accounting tests, (2) analyze branching systems of physical pathways and adversary strategies, (3) analyze trickle or abrupt theft situations for combinations of insiders, (4) accept input probabilities and times in the form of ranges rather than discrete points, and (5) simulate input data using Monte Carlo methods to produce statistically distributed aggregate delay times and detection probabilities. The ITAC program was developed by the Security Applications Center of Westinghouse Hanford Comapny and Boeing Computer Services, Richland, WA

Easy-to-use application programs for decay heat and delayed neutron calculations on personal computers

Energy Technology Data Exchange (ETDEWEB)

Oyamatsu, Kazuhiro [Nagoya Univ. (Japan)

1998-03-01

Application programs for personal computers are developed to calculate the decay heat power and delayed neutron activity from fission products. The main programs can be used in any computers from personal computers to main frames because their sources are written in Fortran. These programs have user friendly interfaces to be used easily not only for research activities but also for educational purposes. (author)

Teaching Machines, Programming, Computers, and Instructional Technology: The Roots of Performance Technology.

Science.gov (United States)

Deutsch, William

1992-01-01

Reviews the history of the development of the field of performance technology. Highlights include early teaching machines, instructional technology, learning theory, programed instruction, the systems approach, needs assessment, branching versus linear program formats, programing languages, and computer-assisted instruction. (LRW)

The Design of an Undergraduate Degree Program in Computer & Digital Forensics

Directory of Open Access Journals (Sweden)

Gary C. Kessler

2006-09-01

Full Text Available Champlain College formally started an undergraduate degree program in Computer & Digital Forensics in 2003. The underlying goals were that the program be multidisciplinary, bringing together the law, computer technology, and the basics of digital investigations; would be available as on online and on-campus offering; and would have a process-oriented focus. Success of this program has largely been due to working closely with practitioners, maintaining activity in events related to both industry and academia, and flexibility to respond to ever-changing needs. This paper provides an overview of how this program was conceived, developed, and implemented; its evolution over time; and current and planned initiatives.

Functional Programming in Computer Science

Energy Technology Data Exchange (ETDEWEB)

Anderson, Loren James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Davis, Marion Kei [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-01-19

We explore functional programming through a 16-week internship at Los Alamos National Laboratory. Functional programming is a branch of computer science that has exploded in popularity over the past decade due to its high-level syntax, ease of parallelization, and abundant applications. First, we summarize functional programming by listing the advantages of functional programming languages over the usual imperative languages, and we introduce the concept of parsing. Second, we discuss the importance of lambda calculus in the theory of functional programming. Lambda calculus was invented by Alonzo Church in the 1930s to formalize the concept of effective computability, and every functional language is essentially some implementation of lambda calculus. Finally, we display the lasting products of the internship: additions to a compiler and runtime system for the pure functional language STG, including both a set of tests that indicate the validity of updates to the compiler and a compiler pass that checks for illegal instances of duplicate names.

Computer programs simplify optical system analysis

Science.gov (United States)

1965-01-01

The optical ray-trace computer program performs geometrical ray tracing. The energy-trace program calculates the relative monochromatic flux density on a specific target area. This program uses the ray-trace program as a subroutine to generate a representation of the optical system.

COYOTE: a finite element computer program for nonlinear heat conduction problems

International Nuclear Information System (INIS)

Gartling, D.K.

1978-06-01

COYOTE is a finite element computer program designed for the solution of two-dimensional, nonlinear heat conduction problems. The theoretical and mathematical basis used to develop the code is described. Program capabilities and complete user instructions are presented. Several example problems are described in detail to demonstrate the use of the program

The RANDOM computer program: A linear congruential random number generator

Science.gov (United States)

Miles, R. F., Jr.

1986-01-01

The RANDOM Computer Program is a FORTRAN program for generating random number sequences and testing linear congruential random number generators (LCGs). The linear congruential form of random number generator is discussed, and the selection of parameters of an LCG for a microcomputer described. This document describes the following: (1) The RANDOM Computer Program; (2) RANDOM.MOD, the computer code needed to implement an LCG in a FORTRAN program; and (3) The RANCYCLE and the ARITH Computer Programs that provide computational assistance in the selection of parameters for an LCG. The RANDOM, RANCYCLE, and ARITH Computer Programs are written in Microsoft FORTRAN for the IBM PC microcomputer and its compatibles. With only minor modifications, the RANDOM Computer Program and its LCG can be run on most micromputers or mainframe computers.

Gender Differences in the Use of Computers, Programming, and Peer Interactions in Computer Science Classrooms

Science.gov (United States)

Stoilescu, Dorian; Egodawatte, Gunawardena

2010-01-01

Research shows that female and male students in undergraduate computer science programs view computer culture differently. Female students are interested more in the use of computers than in doing programming, whereas male students see computer science mainly as a programming activity. The overall purpose of our research was not to find new…

Beyond computer literacy: supporting youth's positive development through technology.

Science.gov (United States)

Bers, Marina Umaschi

2010-01-01

In a digital era in which technology plays a role in most aspects of a child's life, having the competence and confidence to use computers might be a necessary step, but not a goal in itself. Developing character traits that will serve children to use technology in a safe way to communicate and connect with others, and providing opportunities for children to make a better world through the use of their computational skills, is just as important. The Positive Technological Development framework (PTD), a natural extension of the computer literacy and the technological fluency movements that have influenced the world of educational technology, adds psychosocial, civic, and ethical components to the cognitive ones. PTD examines the developmental tasks of a child growing up in our digital era and provides a model for developing and evaluating technology-rich youth programs. The explicit goal of PTD programs is to support children in the positive uses of technology to lead more fulfilling lives and make the world a better place. This article introduces the concept of PTD and presents examples of the Zora virtual world program for young people that the author developed following this framework.

One Head Start Classroom's Experience: Computers and Young Children's Development.

Science.gov (United States)

Fischer, Melissa Anne; Gillespie, Catherine Wilson

2003-01-01

Contends that early childhood educators need to understand how exposure to computers and constructive computer programs affects the development of children. Specifically examines: (1) research on children's technology experiences; (2) determining best practices; and (3) addressing educators' concerns about computers replacing other developmentally…

Gender differences in the use of computers, programming, and peer interactions in computer science classrooms

Science.gov (United States)

Stoilescu, Dorian; Egodawatte, Gunawardena

2010-12-01

Research shows that female and male students in undergraduate computer science programs view computer culture differently. Female students are interested more in the use of computers than in doing programming, whereas male students see computer science mainly as a programming activity. The overall purpose of our research was not to find new definitions for computer science culture but to see how male and female students see themselves involved in computer science practices, how they see computer science as a successful career, and what they like and dislike about current computer science practices. The study took place in a mid-sized university in Ontario. Sixteen students and two instructors were interviewed to get their views. We found that male and female views are different on computer use, programming, and the pattern of student interactions. Female and male students did not have any major issues in using computers. In computing programming, female students were not so involved in computing activities whereas male students were heavily involved. As for the opinions about successful computer science professionals, both female and male students emphasized hard working, detailed oriented approaches, and enjoying playing with computers. The myth of the geek as a typical profile of successful computer science students was not found to be true.

A PC-based computer program for simulation of containment pressurization

International Nuclear Information System (INIS)

Seifaee, F.

1990-01-01

This paper reports that a PC-based computer program has been developed to simulate a pressurized water reactor (PWR) containment during various transients. This containment model is capable of determining pressure and temperature history of a PWR containment in the event of a loss of coolant accident, as well as main steam line breaks inside the containment. Conservation of mass and energy equations are applied to the containment model. Development of the program is based on minimization of input specified information and user friendliness. Maximization of calculation efficiency is obtained by superseding the traditional trial and error procedure for determination of the state variables and implementation of an explicit solution for pressure. The program includes simplified models for active heat removal systems. The results are in close agreement between the present model and CONTEMPT-MOD5 computer code for pressure and temperature inside the containment

Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

International Nuclear Information System (INIS)

Kim, Hyun Chul

2011-01-01

The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water reactor power plants

Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyun Chul [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2011-10-15

The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water

Final Report: Center for Programming Models for Scalable Parallel Computing

Energy Technology Data Exchange (ETDEWEB)

Mellor-Crummey, John [William Marsh Rice University

2011-09-13

As part of the Center for Programming Models for Scalable Parallel Computing, Rice University collaborated with project partners in the design, development and deployment of language, compiler, and runtime support for parallel programming models to support application development for the “leadership-class” computer systems at DOE national laboratories. Work over the course of this project has focused on the design, implementation, and evaluation of a second-generation version of Coarray Fortran. Research and development efforts of the project have focused on the CAF 2.0 language, compiler, runtime system, and supporting infrastructure. This has involved working with the teams that provide infrastructure for CAF that we rely on, implementing new language and runtime features, producing an open source compiler that enabled us to evaluate our ideas, and evaluating our design and implementation through the use of benchmarks. The report details the research, development, findings, and conclusions from this work.

A CAD (Classroom Assessment Design) of a Computer Programming Course

Science.gov (United States)

Hawi, Nazir S.

2012-01-01

This paper presents a CAD (classroom assessment design) of an entry-level undergraduate computer programming course "Computer Programming I". CAD has been the product of a long experience in teaching computer programming courses including teaching "Computer Programming I" 22 times. Each semester, CAD is evaluated and modified…

A Computer Program for Assessing Nuclear Safety Culture Impact

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

2014-10-15

Through several accidents of NPP including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, a lack of safety culture was pointed out as one of the root cause of these accidents. Due to its latent influences on safety performance, safety culture has become an important issue in safety researches. Most of the researches describe how to evaluate the state of the safety culture of the organization. However, they did not include a possibility that the accident occurs due to the lack of safety culture. Because of that, a methodology for evaluating the impact of the safety culture on NPP's safety is required. In this study, the methodology for assessing safety culture impact is suggested and a computer program is developed for its application. SCII model which is the new methodology for assessing safety culture impact quantitatively by using PSA model. The computer program is developed for its application. This program visualizes the SCIs and the SCIIs. It might contribute to comparing the level of the safety culture among NPPs as well as improving the management safety of NPP.

User's guide of parallel program development environment (PPDE). The 2nd edition

International Nuclear Information System (INIS)

Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio; Ohta, Hirofumi

2000-03-01

The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a parallelizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

User's guide of parallel program development environment (PPDE). The 2nd edition

Energy Technology Data Exchange (ETDEWEB)

Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio [Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute, Tokyo (Japan); Ohta, Hirofumi [Hitachi Ltd., Tokyo (Japan)

2000-03-01

The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a paralleilizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

Development and Study the Usage of Blended Learning Environment Model Using Engineering Design Concept Learning Activities to Computer Programming Courses for Undergraduate Students of Rajabhat Universities

Directory of Open Access Journals (Sweden)

Kasame Tritrakan

2017-06-01

Full Text Available The objectives of this research were to study and Synthesise the components, to develop, and to study the usage of blended learning environment model using engineering design concept learning activities to computer programming courses for undergraduate students of Rajabhat universities. The research methodology was divided into 3 phases. Phase I: surveying presents, needs and problems in teaching computer programming of 52 lecturers by using in-depth interview from 5 experienced lecturers. The model’s elements were evaluated by 5 experts. The tools were questionnaire, interview form, and model’s elements assessment form. Phase II: developing the model of blended learning environment and learning activities based on engineering design processes and confirming model by 8 experts. The tools were the draft of learning environment, courseware, and assessment forms. Phase III evaluating the effects of using the implemented environment. The samples were students which formed into 2 groups, 25 people in the experiment group and 27 people in the control group by cluster random sampling. The tools were learning environment, courseware, and assessment tools. The statistics used in this research were means, standard deviation, t-test dependent, and one-way MANOVA. The results found that: 1 Lecturers quite agreed with the physical, mental, social, and information learning environment, learning processes, and assessments. There were all needs in high level. However there were physical environment problems in high level yet quite low in other aspects. 2 The developed learning environment had 4 components which were a 4 types of environments b the inputs included blended learning environment, learning motivation factors, and computer programming content c the processes were analysis of state objectives, design learning environment and activities, developing learning environment and testing materials, implement, ation evaluation and evaluate, 4 the outputs

A computer program for multiple decrement life table analyses.

Science.gov (United States)

Poole, W K; Cooley, P C

1977-06-01

Life table analysis has traditionally been the tool of choice in analyzing distribution of "survival" times when a parametric form for the survival curve could not be reasonably assumed. Chiang, in two papers [1,2] formalized the theory of life table analyses in a Markov chain framework and derived maximum likelihood estimates of the relevant parameters for the analyses. He also discussed how the techniques could be generalized to consider competing risks and follow-up studies. Although various computer programs exist for doing different types of life table analysis [3] to date, there has not been a generally available, well documented computer program to carry out multiple decrement analyses, either by Chiang's or any other method. This paper describes such a program developed by Research Triangle Institute. A user's manual is available at printing costs which supplements the contents of this paper with a discussion of the formula used in the program listing.

Programming Paradigms in Computer Science Education

OpenAIRE

Bolshakova, Elena

2005-01-01

Main styles, or paradigms of programming – imperative, functional, logic, and object-oriented – are shortly described and compared, and corresponding programming techniques are outlined. Programming languages are classified in accordance with the main style and techniques supported. It is argued that profound education in computer science should include learning base programming techniques of all main programming paradigms.

GUI program to compute probabilistic seismic hazard analysis

International Nuclear Information System (INIS)

Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

2006-12-01

The development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface(GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within limits of the possibility

Application of computers in a radiological survey program

International Nuclear Information System (INIS)

Berven, B.A.; Blair, M.S.; Doane, R.W.; Little, C.A.; Perdue, P.T.

1984-01-01

Computers have become increasingly important in data analysis and data management as well as assisting in report preparation in the Oak Ridge National Laboratory (ORNL) Radiological Survey Activities (RASA) Program. The primary function of the RASA program is to collect, analyze, report, and manage data collected to characterize the radiological condition of potentially contaminated sites identified in the Department of Energy's (DOE) remedial action programs. Three different computer systems are routinely utilized in ORNL/RASA operations. Two of these systems are employed in specific functions. A Nuclear Data (ND) 682 is used to perform isotopic analysis of gamma spectroscopic data generated by high-purity germanium detectors for air, water and soil samples. The ND682 employs a 16,000-channel analyzer that is routinely used with four germanium spectrometers. Word processing and data management are accomplished using the INtext system implemented on a DEC PDP-11 computer. A group of personal computers are used to perform a diverse number of functions. These computer systems are Commodore Business Machines (CBM) Model 8032 with a dual floppy disk storage medium and line printers (with optional X-Y plotters). The CBM's are utilized for: (1) data analysis -- raw data from radiation detection instrumentation are stored and manipulated with customized computer programs; (2) data reduction -- raw data are converted into report-ready tables using customized programs; (3) data management -- radionuclide data on each air, water and soil sample are stored on diskettes along with location of archived samples; and (4) program management -- site surveys and report status are tracked by computer files as well as program budget information to provide contemporary information of program status

More scalability, less pain: A simple programming model and its implementation for extreme computing

International Nuclear Information System (INIS)

Lusk, E.L.; Pieper, S.C.; Butler, R.M.

2010-01-01

This is the story of a simple programming model, its implementation for extreme computing, and a breakthrough in nuclear physics. A critical issue for the future of high-performance computing is the programming model to use on next-generation architectures. Described here is a promising approach: program very large machines by combining a simplified programming model with a scalable library implementation. The presentation takes the form of a case study in nuclear physics. The chosen application addresses fundamental issues in the origins of our Universe, while the library developed to enable this application on the largest computers may have applications beyond this one.

Cross software for microprocessor program development at CERN

International Nuclear Information System (INIS)

Eicken, H. von; Montuelle, J.; Willers, I.; Blake, J.

1981-01-01

Programs for a variety of microprocessors (including Intel 8080; Motorola 6800 and 6809 and 68000; and Texas Instruments 9900) can be prepared on different host computers (such as IBM 370, CDC 6000, and Nord 10) using portable programs developed at CERN. The range of cross software consists of: an assembler for each target microprocessor, a single linkage editor, a single object module librarian, and a variety of pre-loaders which convert object modules from CERN's format (CUFOM) into manufacturers' formats. The programs are written in BCPL and PASCAL, programming languages which are available on a wide range of computers. (orig.)

Multi-Language Programming Environments for High Performance Java Computing

OpenAIRE

Vladimir Getov; Paul Gray; Sava Mintchev; Vaidy Sunderam

1999-01-01

Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI) tool which provides ...

PRETTA：A COMPUTER PROGRAM FOR PWR PRESSURIZER’S TRANSIENT THERMODYNAMICS

Institute of Scientific and Technical Information of China (English)

阿谢德; 徐济鋆

2001-01-01

A computer program PRETTA “Pressurizer Transient Thermodynamics Analysis” was developed for the prediction of pressurizer under transient conditions. It is based on the solution of the conservation laws of heat and mass applied to the three separate and non equilibrium thermodynamic regions. In the program all of the important thermal-hydraulics phenomena occurring in the pressurizer: stratification of the hot water and incoming cold water, bulk flashing and condensation, wall condensation, and interfacial heat and mass transfer have been considered. The bubble rising and rain-out models are developed to describe bulk flashing and condensation, respectively. To obtain the wall condensation rate, a one-dimensional heat conduction equation is solved by the pivoting method. The presented computer program will predict the pressure-time behavior of a PWR pressurizer during a variety of transients. The results obtained from the proposed mathematical model are in good agreement with available data on the CHASHMA nuclear power plant's pressurizer performance.

Computer Programs.

Science.gov (United States)

Anderson, Tiffoni

This module provides information on development and use of a Material Safety Data Sheet (MSDS) software program that seeks to link literacy skills education, safety training, and human-centered design. Section 1 discusses the development of the software program that helps workers understand the MSDSs that accompany the chemicals with which they…

Introduction to the Atari Computer. A Program Written in the Pilot Programming Language.

Science.gov (United States)

Schlenker, Richard M.

Designed to be an introduction to the Atari microcomputers for beginners, the interactive computer program listed in this document is written in the Pilot programing language. Instructions are given for entering and storing the program in the computer memory for use by students. (MES)

Computer programming and architecture the VAX

CERN Document Server

Levy, Henry

2014-01-01

Takes a unique systems approach to programming and architecture of the VAXUsing the VAX as a detailed example, the first half of this book offers a complete course in assembly language programming. The second describes higher-level systems issues in computer architecture. Highlights include the VAX assembler and debugger, other modern architectures such as RISCs, multiprocessing and parallel computing, microprogramming, caches and translation buffers, and an appendix on the Berkeley UNIX assembler.

Use of a radiation therapy treatment planning computer in a hospital health physics program

International Nuclear Information System (INIS)

Addison, S.J.

1984-01-01

An onsite treatment planning computer has become state of the art in the care of radiation therapy patients, but in most installations the computer is used for therapy planning a diminutive amount of the day. At St. Mary's Hospital, arrangements have been negotiated for part time use of the treatment planning computer for health physics purposes. Computerized Medical Systems, Inc. (CMS) produces the Modulex radiotherapy planning system which is programmed in MUMPS, a user oriented language specially adapted for handling text string information. St. Mary's Hospital's CMS computer has currently been programmed to assist in data collection and write-up of diagnostic x-ray surveys, meter calibrations, and wipe/leak tests. The computer is setup to provide timely reminders of tests and surveys, and billing for consultation work. Programs are currently being developed for radionuclide inventories. Use of a therapy planning computer for health physics purposes can enhance the radiation safety program and provide additional grounds for the acquisition of such a computer system

Extension of a simplified computer program for analysis of solid-propellant rocket motors

Science.gov (United States)

Sforzini, R. H.

1973-01-01

A research project to develop a computer program for the preliminary design and performance analysis of solid propellant rocket engines is discussed. The following capabilities are included as computer program options: (1) treatment of wagon wheel cross sectional propellant configurations alone or in combination with circular perforated grains, (2) calculation of ignition transients with the igniter treated as a small rocket engine, (3) representation of spherical circular perforated grain ends as an alternative to the conical end surface approximation used in the original program, and (4) graphical presentation of program results using a digital plotter.

Human Memory Organization for Computer Programs.

Science.gov (United States)

Norcio, A. F.; Kerst, Stephen M.

1983-01-01

Results of study investigating human memory organization in processing of computer programming languages indicate that algorithmic logic segments form a cognitive organizational structure in memory for programs. Statement indentation and internal program documentation did not enhance organizational process of recall of statements in five Fortran…

[Computer-assisted multimedia interactive learning program "Primary Open-Angle Glaucoma"].

Science.gov (United States)

Dick, V B; Zenz, H; Eisenmann, D; Tekaat, C J; Wagner, R; Jacobi, K W

1996-05-01

Advances in the area of information technology have opened up new possibilities for the use of interactive media in the training of medical students. Classical instructional technologies, such as video, slides, audio cassettes and computer programs with a textbook orientation, have been merged into one multimedia computer system. The medical profession has been increasingly integrating computer-based applications which can be used, for example, for record keeping within a medical practice. The goal of this development is to provide access to all modes of information storage and retrieval as well as documentation and training systems within a specific context. Since the beginning of the winter semester 1995, the Department of Ophthalmology in Giessen has used the learning program "Primary Open Angle Glaucoma" in student instruction. One factor that contributed to the implementation of this project was that actual training using patients within the clinic is difficult to conduct. Media-supported training that can provide a simulation of actual practice offers a suitable substitute. The learning program has been installed on Power PCs (Apple MacIntosh), which make up the technical foundation of our system. The program was developed using Hypercard software, which provides userfriendly graphical work environment. This controls the input and retrieval of data, direct editing of documents, immediate simulation, the creation of on-screen documents and the integration of slides that have been scanned in as well as QuickTime films. All of this can be accomplished without any special knowledge of programming language or operating systems on the part of the user. The glaucoma learning program is structured along the lines of anatomy, including an explanation of the circulation of the aqueous humor, pathology, clinical symptoms and findings, diagnosis and treatment. This structure along with the possibility for creating a list of personal files for the user with a collection

Promoting healthy computer use among middle school students: a pilot school-based health promotion program.

Science.gov (United States)

Ciccarelli, Marina; Portsmouth, Linda; Harris, Courtenay; Jacobs, Karen

2012-01-01

Introduction of notebook computers in many schools has become integral to learning. This has increased students' screen-based exposure and the potential risks to physical and visual health. Unhealthy computing behaviours include frequent and long durations of exposure; awkward postures due to inappropriate furniture and workstation layout, and ignoring computer-related discomfort. Describe the framework for a planned school-based health promotion program to encourage healthy computing behaviours among middle school students. This planned program uses a community- based participatory research approach. Students in Year 7 in 2011 at a co-educational middle school, their parents, and teachers have been recruited. Baseline data was collected on students' knowledge of computer ergonomics, current notebook exposure, and attitudes towards healthy computing behaviours; and teachers' and self-perceived competence to promote healthy notebook use among students, and what education they wanted. The health promotion program is being developed by an inter-professional team in collaboration with students, teachers and parents to embed concepts of ergonomics education in relevant school activities and school culture. End of year changes in reported and observed student computing behaviours will be used to determine the effectiveness of the program. Building a body of evidence regarding physical health benefits to students from this school-based ergonomics program can guide policy development on the healthy use of computers within children's educational environments.

CONTRIBUTIONS FOR DEVELOPING OF A COMPUTER AIDED LEARNING ENVIRONMENT OF DESCRIPTIVE GEOMETRY

Directory of Open Access Journals (Sweden)

Antonescu Ion

2009-07-01

Full Text Available The paper presents the authors’ contributions for developing a computer code for teaching of descriptive geometry using the computer aided learning techniques. The program was implemented using the programming interface and the 3D modeling capabilities of the AutoCAD system.

Development of interactive patient-based multimedia computer programs in veterinary orthopedic radiology

International Nuclear Information System (INIS)

Kraft, S.L.; Hoskinson, J.J.; Mussman, J.M.; Michaels, W.E.; Mclaughlin, R.; Gaughan, E.M.; Roush, J.K.

1998-01-01

Three computerized multimedia programs on large and small animal veterinary orthopedic radiology were developed and implemented for the radiology curriculum as an alternative to traditional film-based laboratory learning. Programs utilized ''hot words'' (colored text words that displayed an overlaid image label that highlighted lesions) and interactive quizzes which responded appropriately to selected answers. ''Hot words'' helped students develop confidence in accurate lesion detection and the interactive quizzes transformed learning from a passive to an active process. Multiple examples were provided for reinforcement and concepts were incorporated from other clinical disciplines for curriculum integration. Programs were written using a presentation software program, Toolbook for DOS based platform, and contained radiographic images made by laser-scanning digitization. Multiple students could simultaneously access the programs through a network server. These pilot programs were implemented successfully and computerized multimedia presentation proved to be well suited to teaching radiology. Development of the programs required attention to a number of hardware, software, time and cost factors

Recovery Act: Finite Volume Based Computer Program for Ground Source Heat Pump Systems

Energy Technology Data Exchange (ETDEWEB)

James A Menart, Professor

2013-02-22

This report is a compilation of the work that has been done on the grant DE-EE0002805 entitled Finite Volume Based Computer Program for Ground Source Heat Pump Systems. The goal of this project was to develop a detailed computer simulation tool for GSHP (ground source heat pump) heating and cooling systems. Two such tools were developed as part of this DOE (Department of Energy) grant; the first is a two-dimensional computer program called GEO2D and the second is a three-dimensional computer program called GEO3D. Both of these simulation tools provide an extensive array of results to the user. A unique aspect of both these simulation tools is the complete temperature profile information calculated and presented. Complete temperature profiles throughout the ground, casing, tube wall, and fluid are provided as a function of time. The fluid temperatures from and to the heat pump, as a function of time, are also provided. In addition to temperature information, detailed heat rate information at several locations as a function of time is determined. Heat rates between the heat pump and the building indoor environment, between the working fluid and the heat pump, and between the working fluid and the ground are computed. The heat rates between the ground and the working fluid are calculated as a function time and position along the ground loop. The heating and cooling loads of the building being fitted with a GSHP are determined with the computer program developed by DOE called ENERGYPLUS. Lastly COP (coefficient of performance) results as a function of time are provided. Both the two-dimensional and three-dimensional computer programs developed as part of this work are based upon a detailed finite volume solution of the energy equation for the ground and ground loop. Real heat pump characteristics are entered into the program and used to model the heat pump performance. Thus these computer tools simulate the coupled performance of the ground loop and the heat pump. The

The reactor physics computer programs in PC's era

International Nuclear Information System (INIS)

Nainer, O.; Serghiuta, D.

1995-01-01

The main objective of reactor physics analysis is the evaluation of flux and power distribution over the reactor core. For CANDU reactors sophisticated computer programs, such as FMDP and RFSP, were developed 20 years ago for mainframe computers. These programs were adapted to work on workstations with UNIX or DOS, but they lack a feature that could improve their use and that is 'user friendly'. For using these programs the users need to deal with a great amount of information contained in sophisticated files. To modify a model is a great challenge. First of all, it is necessary to bear in mind all the geometrical dimensions and accordingly, to modify the core model to match the new requirements. All this must be done in a line input file. For a DOS platform, using an average performance PC system, could it be possible: to represent and modify all the geometrical and physical parameters in a meaningful way, on screen, using an intuitive graphic user interface; to reduce the real time elapsed in order to perform complex fuel-management analysis 'at home'; to avoid the rewrite of the mainframe version of the program? The author's answer is a fuel-management computer package operating on PC, 3 time faster than on a CDC-Cyber 830 mainframe one (486DX/33MHz/8MbRAM) or 20 time faster (Pentium-PC), respectively. (author). 5 refs., 1 tab., 5 figs

Robotics Technology Development Program

International Nuclear Information System (INIS)

1994-02-01

The Robotics Technology Development Program (RTDP) is a ''needs-driven'' effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE's Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination ampersand Dismantlement (D ampersand D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D ampersand D and CC ampersand AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas

Developing robotic behavior using a genetic programming model

International Nuclear Information System (INIS)

Pryor, R.J.

1998-01-01

This report describes the methodology for using a genetic programming model to develop tracking behaviors for autonomous, microscale robotic vehicles. The use of such vehicles for surveillance and detection operations has become increasingly important in defense and humanitarian applications. Through an evolutionary process similar to that found in nature, the genetic programming model generates a computer program that when downloaded onto a robotic vehicle's on-board computer will guide the robot to successfully accomplish its task. Simulations of multiple robots engaged in problem-solving tasks have demonstrated cooperative behaviors. This report also discusses the behavior model produced by genetic programming and presents some results achieved during the study

The Implementation of Blended Learning Using Android-Based Tutorial Video in Computer Programming Course II

Science.gov (United States)

Huda, C.; Hudha, M. N.; Ain, N.; Nandiyanto, A. B. D.; Abdullah, A. G.; Widiaty, I.

2018-01-01

Computer programming course is theoretical. Sufficient practice is necessary to facilitate conceptual understanding and encouraging creativity in designing computer programs/animation. The development of tutorial video in an Android-based blended learning is needed for students’ guide. Using Android-based instructional material, students can independently learn anywhere and anytime. The tutorial video can facilitate students’ understanding about concepts, materials, and procedures of programming/animation making in detail. This study employed a Research and Development method adapting Thiagarajan’s 4D model. The developed Android-based instructional material and tutorial video were validated by experts in instructional media and experts in physics education. The expert validation results showed that the Android-based material was comprehensive and very feasible. The tutorial video was deemed feasible as it received average score of 92.9%. It was also revealed that students’ conceptual understanding, skills, and creativity in designing computer program/animation improved significantly.

Application of computers in a Radiological Survey Program

International Nuclear Information System (INIS)

Berven, B.A.; Blair, M.S.; Doane, R.W.; Little, C.A.; Perdue, P.T.

1984-01-01

A brief description of some of the applications of computers in a radiological survey program is presented. It has been our experience that computers and computer software have allowed our staff personnel to more productively use their time by using computers to perform the mechanical acquisition, analyses, and storage of data. It is hoped that other organizations may similarly profit from this experience. This effort will ultimately minimize errors and reduce program costs

Teaching Scientific Computing: A Model-Centered Approach to Pipeline and Parallel Programming with C

Directory of Open Access Journals (Sweden)

Vladimiras Dolgopolovas

2015-01-01

Full Text Available The aim of this study is to present an approach to the introduction into pipeline and parallel computing, using a model of the multiphase queueing system. Pipeline computing, including software pipelines, is among the key concepts in modern computing and electronics engineering. The modern computer science and engineering education requires a comprehensive curriculum, so the introduction to pipeline and parallel computing is the essential topic to be included in the curriculum. At the same time, the topic is among the most motivating tasks due to the comprehensive multidisciplinary and technical requirements. To enhance the educational process, the paper proposes a novel model-centered framework and develops the relevant learning objects. It allows implementing an educational platform of constructivist learning process, thus enabling learners’ experimentation with the provided programming models, obtaining learners’ competences of the modern scientific research and computational thinking, and capturing the relevant technical knowledge. It also provides an integral platform that allows a simultaneous and comparative introduction to pipelining and parallel computing. The programming language C for developing programming models and message passing interface (MPI and OpenMP parallelization tools have been chosen for implementation.

Methods and computer programs for PWR's fuel management: Programs Sothis and Ciclon

International Nuclear Information System (INIS)

Aragones, J.M.; Corella, M.R.; Martinez-Val, J.M.

1976-01-01

Methos and computer programs developed at JEN for fuel management in PWR are discussed, including scope of model, procedures for sistematic selection of alternatives to be evaluated, basis of model for neutronic calculation, methods for fuel costs calculation, procedures for equilibrium and trans[tion cycles calculation with Soth[s and Ciclon codes and validation of methods by comparison of results with others of reference (author) ' [es

Translator program converts computer printout into braille language

Science.gov (United States)

Powell, R. A.

1967-01-01

Computer program converts print image tape files into six dot Braille cells, enabling a blind computer programmer to monitor and evaluate data generated by his own programs. The Braille output is printed 8 lines per inch.

A phenomenographic study of the ways of understanding conditional and repetition structures in computer programming languages

Science.gov (United States)

Bucks, Gregory Warren

Computers have become an integral part of how engineers complete their work, allowing them to collect and analyze data, model potential solutions and aiding in production through automation and robotics. In addition, computers are essential elements of the products themselves, from tennis shoes to construction materials. An understanding of how computers function, both at the hardware and software level, is essential for the next generation of engineers. Despite the need for engineers to develop a strong background in computing, little opportunity is given for engineering students to develop these skills. Learning to program is widely seen as a difficult task, requiring students to develop not only an understanding of specific concepts, but also a way of thinking. In addition, students are forced to learn a new tool, in the form of the programming environment employed, along with these concepts and thought processes. Because of this, many students will not develop a sufficient proficiency in programming, even after progressing through the traditional introductory programming sequence. This is a significant problem, especially in the engineering disciplines, where very few students receive more than one or two semesters' worth of instruction in an already crowded engineering curriculum. To address these issues, new pedagogical techniques must be investigated in an effort to enhance the ability of engineering students to develop strong computing skills. However, these efforts are hindered by the lack of published assessment instruments available for probing an individual's understanding of programming concepts across programming languages. Traditionally, programming knowledge has been assessed by producing written code in a specific language. This can be an effective method, but does not lend itself well to comparing the pedagogical impact of different programming environments, languages or paradigms. This dissertation presents a phenomenographic research study

Three assembly programs for the PDP-8E computer

International Nuclear Information System (INIS)

McIlvaine, M.S.; Navarro, E.F.

1976-04-01

In the Atomic Research Center, efforts have been directed towards the utilization of the PDP-8E in the control of various operations, in the storage and retrieval of data and in the on-line and off-line analyses of experimental data. The purpose of this paper is to present three short programs in machine language, two of which were developed specifically to control the operation of the Cal Comp Plotter 565 (Cal Camp Plot data Program) and the TU10 DEC-magtape unit (TM8E Program with Options). The third program, the Maximum Liklihood Activity Profile, was utilized in the mathematical computation of a statistical study

A uniform approach for programming distributed heterogeneous computing systems.

Science.gov (United States)

Grasso, Ivan; Pellegrini, Simone; Cosenza, Biagio; Fahringer, Thomas

2014-12-01

Large-scale compute clusters of heterogeneous nodes equipped with multi-core CPUs and GPUs are getting increasingly popular in the scientific community. However, such systems require a combination of different programming paradigms making application development very challenging. In this article we introduce libWater, a library-based extension of the OpenCL programming model that simplifies the development of heterogeneous distributed applications. libWater consists of a simple interface, which is a transparent abstraction of the underlying distributed architecture, offering advanced features such as inter-context and inter-node device synchronization. It provides a runtime system which tracks dependency information enforced by event synchronization to dynamically build a DAG of commands, on which we automatically apply two optimizations: collective communication pattern detection and device-host-device copy removal. We assess libWater's performance in three compute clusters available from the Vienna Scientific Cluster, the Barcelona Supercomputing Center and the University of Innsbruck, demonstrating improved performance and scaling with different test applications and configurations.

Computer-Aided Corrosion Program Management

Science.gov (United States)

MacDowell, Louis

2010-01-01

This viewgraph presentation reviews Computer-Aided Corrosion Program Management at John F. Kennedy Space Center. The contents include: 1) Corrosion at the Kennedy Space Center (KSC); 2) Requirements and Objectives; 3) Program Description, Background and History; 4) Approach and Implementation; 5) Challenges; 6) Lessons Learned; 7) Successes and Benefits; and 8) Summary and Conclusions.

A multi-media computer program for training in basic professional counseling skills

NARCIS (Netherlands)

Adema, J.; Van der Zee, K.I.

2003-01-01

This paper concerns the development of a self-instructional program for training in basic counseling skills. The product was a multimedia computer program, named GEVAT. The training under consideration was based on a traditional training in which students enhance these skills under supervision.

Frequency Domain Computer Programs for Prediction and Analysis of Rail Vehicle Dynamics : Volume 1. Technical Report

Science.gov (United States)

1975-12-01

Frequency domain computer programs developed or acquired by TSC for the analysis of rail vehicle dynamics are described in two volumes. Volume I defines the general analytical capabilities required for computer programs applicable to single rail vehi...

CRUSH1: a simplified computer program for impact analysis of radioactive material transport casks

Energy Technology Data Exchange (ETDEWEB)

Ikushima, Takeshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1996-07-01

In drop impact analyses for radioactive transport casks, it has become possible to perform them in detail by using interaction evaluation, computer programs, such as DYNA2D, DYNA3D, PISCES and HONDO. However, the considerable cost and computer time are necessitated to perform analyses by these programs. To meet the above requirements, a simplified computer program CRUSH1 has been developed. The CRUSH1 is a static calculation computer program capable of evaluating the maximum acceleration of cask bodies and the maximum deformation of shock absorbers using an Uniaxial Displacement Method (UDM). The CRUSH1 is a revised version of the CRUSH. Main revisions of the computer program are as follows; (1) not only main frame computer but also work stations (OS UNIX) and personal computer (OS Windows 3.1 or Windows NT) are available for use of the CRUSH1 and (2) input data set are revised. In the paper, brief illustration of calculation method using UDM is presented. The second section presents comparisons between UDM and the detailed method. The third section provides a use`s guide for CRUSH1. (author)

CRUSH1: a simplified computer program for impact analysis of radioactive material transport casks

International Nuclear Information System (INIS)

Ikushima, Takeshi

1996-07-01

In drop impact analyses for radioactive transport casks, it has become possible to perform them in detail by using interaction evaluation, computer programs, such as DYNA2D, DYNA3D, PISCES and HONDO. However, the considerable cost and computer time are necessitated to perform analyses by these programs. To meet the above requirements, a simplified computer program CRUSH1 has been developed. The CRUSH1 is a static calculation computer program capable of evaluating the maximum acceleration of cask bodies and the maximum deformation of shock absorbers using an Uniaxial Displacement Method (UDM). The CRUSH1 is a revised version of the CRUSH. Main revisions of the computer program are as follows; (1) not only main frame computer but also work stations (OS UNIX) and personal computer (OS Windows 3.1 or Windows NT) are available for use of the CRUSH1 and (2) input data set are revised. In the paper, brief illustration of calculation method using UDM is presented. The second section presents comparisons between UDM and the detailed method. The third section provides a use's guide for CRUSH1. (author)

A new DoD initiative: the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program

International Nuclear Information System (INIS)

Arevalo, S; Atwood, C; Bell, P; Blacker, T D; Dey, S; Fisher, D; Fisher, D A; Genalis, P; Gorski, J; Harris, A; Hill, K; Hurwitz, M; Kendall, R P; Meakin, R L; Morton, S; Moyer, E T; Post, D E; Strawn, R; Veldhuizen, D v; Votta, L G

2008-01-01

In FY2008, the U.S. Department of Defense (DoD) initiated the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program, a $360M program with a two-year planning phase and a ten-year execution phase. CREATE will develop and deploy three computational engineering tool sets for DoD acquisition programs to use to design aircraft, ships and radio-frequency antennas. The planning and execution of CREATE are based on the 'lessons learned' from case studies of large-scale computational science and engineering projects. The case studies stress the importance of a stable, close-knit development team; a focus on customer needs and requirements; verification and validation; flexible and agile planning, management, and development processes; risk management; realistic schedules and resource levels; balanced short- and long-term goals and deliverables; and stable, long-term support by the program sponsor. Since it began in FY2008, the CREATE program has built a team and project structure, developed requirements and begun validating them, identified candidate products, established initial connections with the acquisition programs, begun detailed project planning and development, and generated the initial collaboration infrastructure necessary for success by its multi-institutional, multidisciplinary teams

Development of Point Kernel Shielding Analysis Computer Program Implementing Recent Nuclear Data and Graphic User Interfaces

International Nuclear Information System (INIS)

Kang, Sang Ho; Lee, Seung Gi; Chung, Chan Young; Lee, Choon Sik; Lee, Jai Ki

2001-01-01

In order to comply with revised national regulationson radiological protection and to implement recent nuclear data and dose conversion factors, KOPEC developed a new point kernel gamma and beta ray shielding analysis computer program. This new code, named VisualShield, adopted mass attenuation coefficient and buildup factors from recent ANSI/ANS standards and flux-to-dose conversion factors from the International Commission on Radiological Protection (ICRP) Publication 74 for estimation of effective/equivalent dose recommended in ICRP 60. VisualShield utilizes graphical user interfaces and 3-D visualization of the geometric configuration for preparing input data sets and analyzing results, which leads users to error free processing with visual effects. Code validation and data analysis were performed by comparing the results of various calculations to the data outputs of previous programs such as MCNP 4B, ISOSHLD-II, QAD-CGGP, etc

Usages of Computers and Smartphones to Develop Dementia Care Education Program for Asian American Family Caregivers.

Science.gov (United States)

Lee, Jung-Ah; Nguyen, Hannah; Park, Joan; Tran, Linh; Nguyen, Trang; Huynh, Yen

2017-10-01

Families of ethnic minority persons with dementia often seek help at later stages of the disease. Little is known about the effectiveness of various methods in supporting ethnic minority dementia patients' caregivers. The objective of the study was to identify smartphone and computer usage among family caregivers of dementia patients (i.e., Korean and Vietnamese Americans) to develop dementia-care education programs for them. Participants were asked various questions related to their computer or smartphone usage in conjunction with needs-assessment interviews. Flyers were distributed at two ethnic minority community centers in Southern California. Snowball recruitment was also utilized to reach out to the families of dementia patients dwelling in the community. Thirty-five family caregivers, including 20 Vietnamese and 15 Korean individuals, participated in this survey. Thirty participants (30 of 35, 85.7%) were computer users. Among those, 76.7% (23 of 30) reported daily usage and 53% (16 of 30) claimed to use social media. A majority of the participants (31 of 35, 88.6%) reported that they owned smartphones. More than half of smartphone users (18 of 29, 62%) claimed to use social media applications. Many participants claimed that they could not attend in-class education due to caregiving and/or transportation issues. Most family caregivers of dementia patients use smartphones more often than computers, and more than half of those caregivers communicate with others through social media apps. A smartphone-app-based caregiver intervention may serve as a more effective approach compared to the conventional in-class method. Multiple modalities for the development of caregiver interventions should be considered.

Investigation on structural analysis computer program of spent nuclear fuel shipping cask

International Nuclear Information System (INIS)

Yagawa, Ganki; Ikushima, Takeshi.

1987-10-01

This report describes the results done by the Sub-Committee of Research Cooperation Committee (RC-62) of the Japan Society of Mechanical Engineers under the trust of the Japan Atomic Energy Research Institute. The principal fulfilments and accomplishments are summarized as follows: (1) Regarding the survey of structural analysis methods of spent fuel shipping cask, several documents, which explain the features and applications of the exclusive computer programs for impact analysis on the basis of 2 or 3 dimensional finite element or difference methods such as HONDO, STEALTH and DYNA-3D, were reviewed. (2) In comparative evaluation of the existing computer programs, the common benchmark test problems for 9 m vertical drop impact of the axisymmetric lead cylinder with and without stainless steel clads were adopted where the calculational evaluations for taking into account the strain rate effect were carried out. (3) Evaluation of impact analysis algorithm of computer programs were conducted and the requirements for computer programs to be developed in future and an index for further studies have been clarified. (author)

A research program in empirical computer science

Science.gov (United States)

Knight, J. C.

1991-01-01

During the grant reporting period our primary activities have been to begin preparation for the establishment of a research program in experimental computer science. The focus of research in this program will be safety-critical systems. Many questions that arise in the effort to improve software dependability can only be addressed empirically. For example, there is no way to predict the performance of the various proposed approaches to building fault-tolerant software. Performance models, though valuable, are parameterized and cannot be used to make quantitative predictions without experimental determination of underlying distributions. In the past, experimentation has been able to shed some light on the practical benefits and limitations of software fault tolerance. It is common, also, for experimentation to reveal new questions or new aspects of problems that were previously unknown. A good example is the Consistent Comparison Problem that was revealed by experimentation and subsequently studied in depth. The result was a clear understanding of a previously unknown problem with software fault tolerance. The purpose of a research program in empirical computer science is to perform controlled experiments in the area of real-time, embedded control systems. The goal of the various experiments will be to determine better approaches to the construction of the software for computing systems that have to be relied upon. As such it will validate research concepts from other sources, provide new research results, and facilitate the transition of research results from concepts to practical procedures that can be applied with low risk to NASA flight projects. The target of experimentation will be the production software development activities undertaken by any organization prepared to contribute to the research program. Experimental goals, procedures, data analysis and result reporting will be performed for the most part by the University of Virginia.

Architecture independent environment for developing engineering software on MIMD computers

Science.gov (United States)

Valimohamed, Karim A.; Lopez, L. A.

1990-01-01

Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

Qualification plan for the Genmod-PC computer program

International Nuclear Information System (INIS)

Richardson, R.B.; Wright, G.M.; Dunford, D.W.; Linauskas, S.H.

2002-07-01

Genmod-PC is an internal dosimetry code that uses Microsoft Windows operating system, and that currently calculates radionuclide doses and intakes for an adult male. This report provides a plan for specifying the quality assurance measures that conform to the recommendations of the Canadian Standards Association, as well as AECL procedural requirements for a legacy computer program developed at AECL. (author)

Developments in the electron gun simulation program, EGUN

International Nuclear Information System (INIS)

Herrmannsfeldt, W.B.

1994-11-01

This paper discusses the developments in the electron gun simulation programs that are based on EGUN with its derivatives and supporting programs. Much of the code development has been inspired by technology changes in computer hardware; the implications of this evolution on EGN2 are discussed. Some examples and a review of the capabilities of the EGUN family are described

Developments in the electron gun simulation program, EGUN

Science.gov (United States)

Herrmannsfeldt, W. B.

1995-07-01

This paper discusses the developments in the electron gun simulation programs that are based on EGUN with its derivatives and supporting programs. Much of the code development has been inspired by technology changes in computer hardware; the implications of this evolution on EGN2 are discussed. Some examples and a review of the capabilities of the EGUN family are described.

The Development of Computer-Aided Design for Electrical Equipment Selection and Arrangement of 10 Kv Switchgear

Directory of Open Access Journals (Sweden)

Chernaya Anastassiya

2015-01-01

Full Text Available The paper intends to give an overview of a computer-aided design program application. The research includes two main parts: the development of a computer-aided design for an appropriate switchgear selection and its arrangement in an indoor switchgear layout. Matlab program was used to develop a computer-aided design system. The use of this program considerably simplifies the selection and arrangement of 10 kV switchgear.

A program to compute the soft Robinson-Foulds distance between phylogenetic networks.

Science.gov (United States)

Lu, Bingxin; Zhang, Louxin; Leong, Hon Wai

2017-03-14

Over the past two decades, phylogenetic networks have been studied to model reticulate evolutionary events. The relationships among phylogenetic networks, phylogenetic trees and clusters serve as the basis for reconstruction and comparison of phylogenetic networks. To understand these relationships, two problems are raised: the tree containment problem, which asks whether a phylogenetic tree is displayed in a phylogenetic network, and the cluster containment problem, which asks whether a cluster is represented at a node in a phylogenetic network. Both the problems are NP-complete. A fast exponential-time algorithm for the cluster containment problem on arbitrary networks is developed and implemented in C. The resulting program is further extended into a computer program for fast computation of the Soft Robinson-Foulds distance between phylogenetic networks. Two computer programs are developed for facilitating reconstruction and validation of phylogenetic network models in evolutionary and comparative genomics. Our simulation tests indicated that they are fast enough for use in practice. Additionally, the distribution of the Soft Robinson-Foulds distance between phylogenetic networks is demonstrated to be unlikely normal by our simulation data.

Computer-Aided Authoring of Programmed Instruction for Teaching Symbol Recognition. Final Report.

Science.gov (United States)

Braby, Richard; And Others

This description of AUTHOR, a computer program for the automated authoring of programmed texts designed to teach symbol recognition, includes discussions of the learning strategies incorporated in the design of the instructional materials, hardware description and the algorithm for the software, and current and future developments. Appendices…

CINDA-3G: Improved Numerical Differencing Analyzer Program for Third-Generation Computers

Science.gov (United States)

Gaski, J. D.; Lewis, D. R.; Thompson, L. R.

1970-01-01

The goal of this work was to develop a new and versatile program to supplement or replace the original Chrysler Improved Numerical Differencing Analyzer (CINDA) thermal analyzer program in order to take advantage of the improved systems software and machine speeds of the third-generation computers.

CRECTJ: a computer program for compilation of evaluated nuclear data

Energy Technology Data Exchange (ETDEWEB)

Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1999-09-01

In order to compile evaluated nuclear data in the ENDF format, the computer program CRECTJ has been developed. CRECTJ has two versions; CRECTJ5 treats the data in the ENDF/B-IV and ENDF/B-V format, and CRECTJ6 the data in the ENDF-6 format. These programs have been frequently used to make Japanese Evaluated Nuclear Data Library (JENDL). This report describes input data and examples of CRECTJ. (author)

Computer and computer graphics support for the ALARA program

International Nuclear Information System (INIS)

Paine, D.; Hall, C.J.

1984-01-01

Computer programs have been developed which support three aspects of the ALARA program at Rockwell Hanford Operations (RHO): 1) Setting annual dose and skin contamination goals, 2) Analyzing trends in operational organizations' dose, numbers of skin contaminations, or radiation occurrences, and 3) Presenting graphic displays to enhance worker safety awareness. Programs have been written which search dosemetry files and produce histograms of annual occupational exposure and skin contamination histories utilizing the DISSPLA software or a desk top color graphics terminal. These programs and associated graphics are used to assemble dose and skin contamination information in a summary format so that ALARA teams can assess the past year's performance and establish reduction goals for the coming year. In addition, the graphics provide a management tool for recognizing desirable or undesirable trends in an organization's occupational dose or number of skin contaminations. Desk top graphics capabilities have been used to display safety-related data to enhance management review and worker awareness of radiological and industrial safety conditions in the work area. The following graphs are prepared on a monthly basis: 1) Numbers of skin contaminations company wide and for specific operating organizations within the company, 2) Numbers of radiation occurrences, 3) Dose histories for specific operational organizations, 4) Numbers of OSHA recordable incidents, 5) OSHA recordable incident rates and severity levels and 6) Lost workday cases

The SX Solver: A New Computer Program for Analyzing Solvent-Extraction Equilibria

International Nuclear Information System (INIS)

McNamara, B.K.; Rapko, B.M.; Lumetta, G.J.

1999-01-01

A new computer program, the SX Solver, has been developed to analyze solvent-extraction equilibria. The program operates out of Microsoft Excel and uses the built-in ''Solver'' function to minimize the sum of the square of the residuals between measured and calculated distribution coefficients. The extraction of nitric acid by tributylphosphate has been modeled to illustrate the program's use

Development and evaluation of the performance of a computer program for the quality control of radioligant assays, application to the radioassay of insulin

International Nuclear Information System (INIS)

Mesquita, C.H. de.

1983-01-01

A computer program was developed to evaluate several parameters of in radioligant assays. The program was written in FORTRAN-IV having a modular structure. The present version is designed to compute a number of parameters pertinent to the activities of the radioassays. The standard curve is fitted to the empirical model which has four parameters following Marquardt i-iterative scheme. The curve is weighted according to Rodbard criterion. The mini mum detectable dose (MDD) is estimated by a criterion which considers the standard deviation of the experimental data measured with respect to the zero concentration, theoretically computed by the power function. This function considers the standard deviations of all samples and standards being assayed. The Scatchard plot is drawn for one binding component, but it is suitable for up to five components including that nonspecific and non saturated one. The specific activity is computed by the self-displacement method including the corrections suggested by Morris. The computer program processes data pertinent to the thermodynamic analysis through the incubation temperature and its respective reaction affinity constant 'K'. Starting from the estimated enthalpy and entropy of the reaction, the program produces theoretical standard curves for any level of incubation temperature. This allows the analyst to select the interval which best attends the dosage needs. Other general data pertinent to the radioisotope methodology can also be processed by the present program, such as radiochromatogram analysis chi-square test and the estimate the error during the procedures of pipetting. In order to demonstrate the use and the quality of the informations given by the program, a radioimmunoassay of insulin was carried out. The results obtained are in good agreement with those found in the literature. (Author) [pt

Advanced Certification Program for Computer Graphic Specialists. Final Performance Report.

Science.gov (United States)

Parkland Coll., Champaign, IL.

A pioneer program in computer graphics was implemented at Parkland College (Illinois) to meet the demand for specialized technicians to visualize data generated on high performance computers. In summer 1989, 23 students were accepted into the pilot program. Courses included C programming, calculus and analytic geometry, computer graphics, and…

Developments in the electron gun simulation program, EGUN

International Nuclear Information System (INIS)

Herrmannsfeldt, W.B.

1995-01-01

This paper discusses the developments in the electron gun simulation programs that are based on EGUN with its derivatives and supporting programs. Much of the code development has been inspired by technology changes in computer hardware; the implications of this evolution on EGN2 are discussed. Some examples and a review of the capabilities of the EGUN family are described. copyright 1995 American Institute of Physics

Development of a computer program for the simulation of one-dimensional fixed- and moving-bed reactors

International Nuclear Information System (INIS)

Hartner, P.

1996-11-01

Chemical reactors with a flow through a bed of solid particles are of great importance in the processing industry. Modern computational tools allow for an improved characterization of the complex facts in such reactors leading to new opportunities of optimizing the reactor operation and environmental effects. This thesis is concerned with the development of the one-dimensional simulation software REASIM. The program covers the effects within a reacting bed and is designed for fixed and moving beds. To describe the reactor the balances for energy, momentum and mass are solved. The drying of the particles, pyrolysis and chemical gas-solid and gas-gas reactions are considered. For the description of the chemical gas-solid reactions a particle model for porous solids is developed. The calculation of mass transfer and of chemical reactions is strictly separated. All parameters necessary for the model can be measured in the laboratory. The model equations form a system of partial differential equations. This system is transformed to a set of ordinary differential equations. It is found that the best discretization method is the method of finite differences with the upwind-scheme for situations where convection is strong. The program has a modular structure making it is easy to replace parts of the program by new, improved modules if they become available. (author)

User's guide of parallel program development environment (PPDE). The 2nd edition

Energy Technology Data Exchange (ETDEWEB)

Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio [Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute, Tokyo (Japan); Ohta, Hirofumi [Hitachi Ltd., Tokyo (Japan)

2000-03-01

The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a paralleilizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

development of a computer program for the design of auger

African Journals Online (AJOL)

User

industries. The classical approach to its analysis and design involve the determination of the type and ... program was developed for the above processes to remove the constraints of the classical approach. .... known, one would first decide on the chart. (1-4) that ... integration of a graphics routine to enable the user develop ...

RECON: a computer program for analyzing repository economics. Documentation and user's manual

International Nuclear Information System (INIS)

Clark, L.L.; Cole, B.M.; McNair, G.W.; Schutz, M.E.

1983-05-01

From 1981 through 1983 the Pacific Northwest Laboratory has been developing a computer model named RECON to calculate repository costs from parametric data input. The objective of the program has been to develop the capability to evalute the effect on costs of changes in repository design parameters and operating scenario assumptions. This report documents the development of the model through March of 1983. Included in the report are: (1) descriptions of model development and the underlying equations, assumptions and definitions; (2) descriptions of data input either using card images or an interactive data input program; and (3) detailed listings of the program and definitions of program variables. Cost estimates generated using the model have been verified against independent estimates and good agreement has been obtained

The NASA computer science research program plan

Science.gov (United States)

1983-01-01

A taxonomy of computer science is included, one state of the art of each of the major computer science categories is summarized. A functional breakdown of NASA programs under Aeronautics R and D, space R and T, and institutional support is also included. These areas were assessed against the computer science categories. Concurrent processing, highly reliable computing, and information management are identified.

Case Studies of Liberal Arts Computer Science Programs

Science.gov (United States)

Baldwin, D.; Brady, A.; Danyluk, A.; Adams, J.; Lawrence, A.

2010-01-01

Many undergraduate liberal arts institutions offer computer science majors. This article illustrates how quality computer science programs can be realized in a wide variety of liberal arts settings by describing and contrasting the actual programs at five liberal arts colleges: Williams College, Kalamazoo College, the State University of New York…

A computer program to calculate the committed dose equivalent after the inhalation of radioactivity

International Nuclear Information System (INIS)

Van der Woude, S.

1989-03-01

A growing number of people are, as part of their occupation, at risk of being exposed to radiation originating from sources inside their bodies. The quantification of this exposure is an important part of health physics. The International Commission on Radiological Protection (ICRP) developed a first-order kinetics compartmental model to determine the transport of radioactive material through the human body. The model and the parameters involved in its use, are discussed. A versatile computer program was developed to do the following after the in vivo measurement of either the organ- or whole-body activity: calculate the original amount of radioactive material which was inhaled (intake) by employing the ICRP compartmental model of the human body; compare this intake to calculated reference levels and state any action to be taken for the case under consideration; calculate the committed dose equivalent resulting from this intake. In the execution of the above-mentioned calculations, the computer program makes provision for different aerosol particle sizes and the effect of previous intakes. Model parameters can easily be changed to take the effects of, for instance, medical intervention into account. The computer program and the organization of the data in the input files are such that the computer program can be applied to any first-order kinetics compartmental model. The computer program can also conveniently be used for research on problems related to the application of the ICRP model. 18 refs., 25 figs., 5 tabs

Computer programming in the UK undergraduate mathematics curriculum

Science.gov (United States)

Sangwin, Christopher J.; O'Toole, Claire

2017-11-01

This paper reports a study which investigated the extent to which undergraduate mathematics students in the United Kingdom are currently taught to programme a computer as a core part of their mathematics degree programme. We undertook an online survey, with significant follow-up correspondence, to gather data on current curricula and received replies from 46 (63%) of the departments who teach a BSc mathematics degree. We found that 78% of BSc degree courses in mathematics included computer programming in a compulsory module but 11% of mathematics degree programmes do not teach programming to all their undergraduate mathematics students. In 2016, programming is most commonly taught to undergraduate mathematics students through imperative languages, notably MATLAB, using numerical analysis as the underlying (or parallel) mathematical subject matter. Statistics is a very popular choice in optional courses, using the package R. Computer algebra systems appear to be significantly less popular for compulsory first-year courses than a decade ago, and there was no mention of logic programming, functional programming or automatic theorem proving software. The modal form of assessment of computing modules is entirely by coursework (i.e. no examination).

Introduction of handheld computing to a family practice residency program.

Science.gov (United States)

Rao, Goutham

2002-01-01

Handheld computers are valuable practice tools. It is important for residency programs to introduce their trainees and faculty to this technology. This article describes a formal strategy to introduce handheld computing to a family practice residency program. Objectives were selected for the handheld computer training program that reflected skills physicians would find useful in practice. TRGpro handheld computers preloaded with a suite of medical reference programs, a medical calculator, and a database program were supplied to participants. Training consisted of four 1-hour modules each with a written evaluation quiz. Participants completed a self-assessment questionnaire after the program to determine their ability to meet each objective. Sixty of the 62 participants successfully completed the training program. The mean composite score on quizzes was 36 of 40 (90%), with no significant differences by level of residency training. The mean self-ratings of participants across all objectives was 3.31 of 4.00. Third-year residents had higher mean self-ratings than others (mean of group, 3.62). Participants were very comfortable with practical skills, such as using drug reference software, and less comfortable with theory, such as knowing the different types of handheld computers available. Structured training is a successful strategy for introducing handheld computing to a residency program.

MP Salsa: a finite element computer program for reacting flow problems. Part 1--theoretical development

Energy Technology Data Exchange (ETDEWEB)

Shadid, J.N.; Moffat, H.K.; Hutchinson, S.A.; Hennigan, G.L.; Devine, K.D.; Salinger, A.G.

1996-05-01

The theoretical background for the finite element computer program, MPSalsa, is presented in detail. MPSalsa is designed to solve laminar, low Mach number, two- or three-dimensional incompressible and variable density reacting fluid flows on massively parallel computers, using a Petrov-Galerkin finite element formulation. The code has the capability to solve coupled fluid flow, heat transport, multicomponent species transport, and finite-rate chemical reactions, and to solver coupled multiple Poisson or advection-diffusion- reaction equations. The program employs the CHEMKIN library to provide a rigorous treatment of multicomponent ideal gas kinetics and transport. Chemical reactions occurring in the gas phase and on surfaces are treated by calls to CHEMKIN and SURFACE CHEMKIN, respectively. The code employs unstructured meshes, using the EXODUS II finite element data base suite of programs for its input and output files. MPSalsa solves both transient and steady flows by using fully implicit time integration, an inexact Newton method and iterative solvers based on preconditioned Krylov methods as implemented in the Aztec solver library.

Development of a single cell spherical shell model for an investigation of electrical properties with a computing program

Directory of Open Access Journals (Sweden)

Boonlamp, M.

2005-03-01

Full Text Available A spherical double shell model (SDM for a single cell has been developed, using Laplace’s equation in spherical coordinates and boundary conditions. Electric field intensities and dielectric constants of each region inside and outside of the cell have been estimated. The dielectrophoretic spectrum of the real part of a complex function (Re[f ( ω] were computed using Visual Foxpro Version 6, which gave calculated values pertaining to electrical properties of the cell model as compared with experimental values. The process was repeated until the error percentile was in an acceptable range. The calculated parameters were the dielectric constants and the conductivities of the inner cytoplasm ( εic, σic, the outer cytoplasm ( εoc, σoc, the inner membrane ( εim, σim, the outer membrane ( εom, σom, the suspending solution( εs, σs and the thickness of each layer (dom, doc, dim, respectively. This computer program provides estimated values of cell electrical properties with high accuracy and required minimal computational time.

Multithreaded transactions in scientific computing. The Growth06_v2 program

Science.gov (United States)

Daniluk, Andrzej

2009-07-01

efficient than the previous ones [3]. Summary of revisions:The design pattern (See Fig. 2 of Ref. [3]) has been modified according to the scheme shown on Fig. 1. A graphical user interface (GUI) for the program has been reconstructed. Fig. 2 presents a hybrid diagram of a GUI that shows how onscreen objects connect to use cases. The program has been compiled with English/USA regional and language options. Note: The figures mentioned above are contained in the program distribution file. Unusual features: The program is distributed in the form of source project GROWTH06_v2.dpr with associated files, and should be compiled using Borland Delphi compilers versions 6 or latter (including Borland Developer Studio 2006 and Code Gear compilers for Delphi). Additional comments: Two figures are included in the program distribution file. These are captioned Static classes model for Transaction design pattern. A model of a window that shows how onscreen objects connect to use cases. Running time: The typical running time is machine and user-parameters dependent. References: [1] A. Daniluk, Comput. Phys. Comm. 170 (2005) 265. [2] W.H. Press, B.P. Flannery, S.A. Teukolsky, W.T. Vetterling, Numerical Recipes in Pascal: The Art of Scientific Computing, first ed., Cambridge University Press, 1989. [3] M. Brzuszek, A. Daniluk, Comput. Phys. Comm. 175 (2006) 678.

Guidelines for the documentation of digital computer programs - approved 1974

International Nuclear Information System (INIS)

Anon.

1975-01-01

This standard presents guidelines for the documentation of engineering and scientific computer programs. Good documentation promotes understanding, reduces duplication of effort, eases conversion to different computer environments and aids modification for extended applications. Good documentation is essential for implementation and effective use of programs obtained from other installations. Since the intention of this standard is to encourage better communication between the developer and user, it should be regarded as a guide rather than a set of rigid specifications. As a guide, it is sufficiently comprehensive to apply to large-scale programs intended for extensive external use. Not all features of this document are appropriate in all circumstances. In general, as the project complexity increases so does the need for more complete documentation. An organization may have special documentation requirements which supersede or extend these guidelines. This standard is a revision of ANS-STD.2-1967 and supersedes it

Complex of two-dimensional multigroup programs for neutron-physical computations of nuclear reactor

International Nuclear Information System (INIS)

Karpov, V.A.; Protsenko, A.N.

1975-01-01

Briefly stated mathematical aspects of the two-dimensional multigroup method of neutron-physical computation of nuclear reactor. Problems of algorithmization and BESM-6 computer realisation of multigroup diffuse approximations in hexagonal and rectangular calculated lattices are analysed. The results of computation of fast critical assembly having complicated composition of the core are given. The estimation of computation accuracy of criticality, neutron fields distribution and efficiency of absorbing rods by means of computer programs developed is done. (author)

Intruder dose pathway analysis for the onsite disposal of radioactive wastes: The ONSITE/MAXI1 computer program

International Nuclear Information System (INIS)

Kennedy, W.E. Jr.; Peloquin, R.A.; Napier, B.A.; Neuder, S.M.

1987-02-01

This document summarizes initial efforts to develop human-intrusion scenarios and a modified version of the MAXI computer program for potential use by the NRC in reviewing applications for onsite radioactive waste disposal. Supplement 1 of NUREG/CR-3620 (1986) summarized modifications and improvements to the ONSITE/MAXI1 software package. This document summarizes a modified version of the ONSITE/MAXI1 computer program. This modified version of the computer program operates on a personal computer and permits the user to optionally select radiation dose conversion factors published by the International Commission on Radiological Protection (ICRP) in their Publication No. 30 (ICRP 1979-1982) in place of those published by the ICRP in their Publication No. 2 (ICRP 1959) (as implemented in the previous versions of the ONSITE/MAXI1 computer program). The pathway-to-human models used in the computer program have not been changed from those described previously. Computer listings of the ONSITE/MAXI1 computer program and supporting data bases are included in the appendices of this document

01010000 01001100 01000001 01011001: Play Elements in Computer Programming

Science.gov (United States)

Breslin, Samantha

2013-01-01

This article explores the role of play in human interaction with computers in the context of computer programming. The author considers many facets of programming including the literary practice of coding, the abstract design of programs, and more mundane activities such as testing, debugging, and hacking. She discusses how these incorporate the…

A Computer Program for Simplifying Incompletely Specified Sequential Machines Using the Paull and Unger Technique

Science.gov (United States)

Ebersole, M. M.; Lecoq, P. E.

1968-01-01

This report presents a description of a computer program mechanized to perform the Paull and Unger process of simplifying incompletely specified sequential machines. An understanding of the process, as given in Ref. 3, is a prerequisite to the use of the techniques presented in this report. This process has specific application in the design of asynchronous digital machines and was used in the design of operational support equipment for the Mariner 1966 central computer and sequencer. A typical sequential machine design problem is presented to show where the Paull and Unger process has application. A description of the Paull and Unger process together with a description of the computer algorithms used to develop the program mechanization are presented. Several examples are used to clarify the Paull and Unger process and the computer algorithms. Program flow diagrams, program listings, and a program user operating procedures are included as appendixes.

An introduction to Python and computer programming

CERN Document Server

Zhang, Yue

2015-01-01

This book introduces Python programming language and fundamental concepts in algorithms and computing. Its target audience includes students and engineers with little or no background in programming, who need to master a practical programming language and learn the basic thinking in computer science/programming. The main contents come from lecture notes for engineering students from all disciplines, and has received high ratings. Its materials and ordering have been adjusted repeatedly according to classroom reception. Compared to alternative textbooks in the market, this book introduces the underlying Python implementation of number, string, list, tuple, dict, function, class, instance and module objects in a consistent and easy-to-understand way, making assignment, function definition, function call, mutability and binding environments understandable inside-out. By giving the abstraction of implementation mechanisms, this book builds a solid understanding of the Python programming language.

Program package for the computation of lenses and deflectors

International Nuclear Information System (INIS)

Lencova, B.; Wisselink, G.

1990-01-01

In this paper a set of computer programs for the design of electrostatic and magnetic electron lenses and for the design of multipoles for electron microscopy and lithography is described. The two-dimensional field computation is performed by the finite-element method. In order to meet the high demands on accuracy, the programs include the use of a variable step in the fine mesh made with an automeshing procedure, improved methods for coefficient evaluation, a fast solution procedure for the linear equations, and modified algorithms for computation of multipoles and electrostatic lenses. They allow for a fast and accurate computation of electron optical elements. For the input and modification of data, and for presentation of results, graphical menu driven programs written for personal computers are used. For the computation of electron optical properties axial fields are used. (orig.)

SAFE users manual. Volume 4. Computer programs

International Nuclear Information System (INIS)

Grady, L.M.

1983-06-01

Documentation for the Safeguards Automated Facility Evaluation (SAFE) computer programs is presented. The documentation is in the form of subprogram trees, program abstracts, flowcharts, and listings. Listings are provided on microfiche

PRISIM: a computer program that makes PRA useful

International Nuclear Information System (INIS)

Fussell, J.B.; Campbell, D.J.; Glynn, J.C.; Burdick, G.R.

1986-01-01

PRISIM is an IBM personal computer program that translates probabilistic risk assessment (PRA) information and calculates additional PRA type information for use by those who are not PRA experts. Specifically, PRISIM was developed for the US Nuclear Regulatory Commission for use by their resident inspectors at nuclear power plants. Inspector activities are either scheduled or are in response to a particular status of a plant. PRISIM is useful for either activity

Investigation on structural analysis computer program of spent nuclear fuel shipping cask, (2)

International Nuclear Information System (INIS)

Yagawa, Ganki; Ikushima, Takeshi.

1987-10-01

This report describes the results (II) done by the Sub-Committee of Research Cooperation Committee (RC-62) of the Japan Society of Mechanical Engineers under the trust of the Japan Atomic Energy Research Institute. The principal fulfilments and accomplishments are summarized as follows: (1) Regarding the survey of structural analysis methods of spent fuel shipping cask, several documents, which explain the features and applications of the exclusive computer programs for impact analysis on the basis of 2 or 3 dimensional finite element or difference methods, were reviewed. (2) In comparative evaluation of the existing computer programs, the common benchmark test problems for drop impact of the axisymmetric cylinder and plate were adopted the calculational evaluations for taking into account the strain rate effect of material properties, effect of artificial viscosity and effect of time integration step size were carried out. (3) Evaluation of impact analysis algorithm of computer programs were conducted and the requirements for computer programs to be developed in future and an index for further studies have been clarified. (author)

A Computer-Aided Writing Program for Learning Disabled Adolescents.

Science.gov (United States)

Fais, Laurie; Wanderman, Richard

The paper describes the application of a computer-assisted writing program in a special high school for learning disabled and dyslexic students and reports on a study of the program's effectiveness. Particular advantages of the Macintosh Computer for such a program are identified including use of the mouse pointing tool, graphic icons to identify…

INSPECT: a package of computer programs for planning safeguards inspections

International Nuclear Information System (INIS)

Wincek, M.A.; Mullen, M.F.

1979-04-01

As part of the U.S. program to provide technical assistance to the International Atomic Energy Agency, a package of computer programs was developed for use in planning safeguards inspections of various types of nuclear facilities. The INSPECT software package is a set of five interactive FORTRAN programs which can be used to calculate the variance components of the MUF (Material Unaccounted For) statistic, the variance components of the D (difference) statistic, attribute and variables sampling plans, a measure of the effectiveness of the inspection, and a measurement of the cost of implementing the inspection plan. This report describes the programs and explains how to use them

Evaluating computer program performance on the CRAY-1

International Nuclear Information System (INIS)

Rudsinski, L.; Pieper, G.W.

1979-01-01

The Advanced Scientific Computers Project of Argonne's Applied Mathematics Division has two objectives: to evaluate supercomputers and to determine their effect on Argonne's computing workload. Initial efforts have focused on the CRAY-1, which is the only advanced computer currently available. Users from seven Argonne divisions executed test programs on the CRAY and made performance comparisons with the IBM 370/195 at Argonne. This report describes these experiences and discusses various techniques for improving run times on the CRAY. Direct translations of code from scalar to vector processor reduced running times as much as two-fold, and this reduction will become more pronounced as the CRAY compiler is developed. Further improvement (two- to ten-fold) was realized by making minor code changes to facilitate compiler recognition of the parallel and vector structure within the programs. Finally, extensive rewriting of the FORTRAN code structure reduced execution times dramatically, in three cases by a factor of more than 20; and even greater reduction should be possible by changing algorithms within a production code. It is condluded that the CRAY-1 would be of great benefit to Argonne researchers. Existing codes could be modified with relative ease to run significantly faster than on the 370/195. More important, the CRAY would permit scientists to investigate complex problems currently deemed infeasibile on traditional scalar machines. Finally, an interface between the CRAY-1 and IBM computers such as the 370/195, scheduled by Cray Research for the first quarter of 1979, would considerably facilitate the task of integrating the CRAY into Argonne's Central Computing Facility. 13 tables

Development of a computer program to determine the pulse-height distribution in a gamma-ray detector from an arbitrary geometry source -feasibility study

International Nuclear Information System (INIS)

Currie, G.D.; Marshall, M.

1989-03-01

The feasibility of developing a computer program suitable for evaluating the pulse-height spectrum in a gamma-ray detector from a complex geometry source has been examined. A selection of relevant programs, Monte Carlo radiation transport codes, have been identified and their applicability to this study discussed. It is proposed that the computation be performed in two parts: the evaluation of the photon fluence at the detector using a photon transport code, and calculation of the pulse-height distribution from this spectrum using response functions determined with an electron-photon transport code. The two transport codes selected to perform this procedure are MCNP (Monte Carlo Neutron Photon code), and EGS4 (Electron Gamma Shower code). (Author)

The Dynamic Geometrisation of Computer Programming

Science.gov (United States)

Sinclair, Nathalie; Patterson, Margaret

2018-01-01

The goal of this paper is to explore dynamic geometry environments (DGE) as a type of computer programming language. Using projects created by secondary students in one particular DGE, we analyse the extent to which the various aspects of computational thinking--including both ways of doing things and particular concepts--were evident in their…

ALMOD-JRC computer program

International Nuclear Information System (INIS)

Cacciabue, P.C.; Lisanti, B.; Tozzi, A.

1984-01-01

This paper discusses the details concerning the newly developed or modified models of the computer program ALMOD-JRC, originating from ALMOD 3/Rel 4. The most important argument for the implementation of the new models was the need to enlarge the spectrum of the simulated phenomena, and to improve the simulation of experimental facilities such as LOFT or LOBI. This has led to a better formulation of the heat transfer and pressure drops correlations and to the implementation of the treatment of the heat losses to structural materials. In particular a series of test cases on real power plants, a pre-test examination of a LOBI station blackout ATWS experiment and the post test analysis of the L9-3 experiment, show the ability of ALMOD-JRC to correctly simulate PWR incident sequences. Although in ALMOD-JRC the code capabilities have been expanded, the limitations of the original version of the program still hold for what concerns the treatment of the coolant thermohydraulics as homogeneous flow for the two phase conditions in the primary coolant circuit. The other interesting feature of the new code is the remarkably shorter running times obtained with the introduction of simplified numerical treatments for the solving equations, without significant loss of accuracy of results

Evaluation of a data dictionary system. [information dissemination and computer systems programs

Science.gov (United States)

Driggers, W. G.

1975-01-01

The usefulness was investigated of a data dictionary/directory system for achieving optimum benefits from existing and planned investments in computer data files in the Data Systems Development Branch and the Institutional Data Systems Division. Potential applications of the data catalogue system are discussed along with an evaluation of the system. Other topics discussed include data description, data structure, programming aids, programming languages, program networks, and test data.

The Harwell TAILS computer program user's manual

International Nuclear Information System (INIS)

Rouse, K.D.; Cooper, M.J.

1980-11-01

The Harwell TAILS computer program is a versatile program for crystal structure refinement through the analysis of neutron or X-ray diffraction data from single crystals or powders. The main features of the program are described and details are given of the data input and output specifications. (author)

Quality assurance of analytical, scientific, and design computer programs for nuclear power plants

International Nuclear Information System (INIS)

1994-06-01

This Standard applies to the design and development, modification, documentation, execution, and configuration management of computer programs used to perform analytical, scientific, and design computations during the design and analysis of safety-related nuclear power plant equipment, systems, structures, and components as identified by the owner. 2 figs

Quality assurance of analytical, scientific, and design computer programs for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-06-01

This Standard applies to the design and development, modification, documentation, execution, and configuration management of computer programs used to perform analytical, scientific, and design computations during the design and analysis of safety-related nuclear power plant equipment, systems, structures, and components as identified by the owner. 2 figs.

Thinking processes used by high-performing students in a computer programming task

Directory of Open Access Journals (Sweden)

Marietjie Havenga

2011-07-01

Full Text Available Computer programmers must be able to understand programming source code and write programs that execute complex tasks to solve real-world problems. This article is a trans- disciplinary study at the intersection of computer programming, education and psychology. It outlines the role of mental processes in the process of programming and indicates how successful thinking processes can support computer science students in writing correct and well-defined programs. A mixed methods approach was used to better understand the thinking activities and programming processes of participating students. Data collection involved both computer programs and students’ reflective thinking processes recorded in their journals. This enabled analysis of psychological dimensions of participants’ thinking processes and their problem-solving activities as they considered a programming problem. Findings indicate that the cognitive, reflective and psychological processes used by high-performing programmers contributed to their success in solving a complex programming problem. Based on the thinking processes of high performers, we propose a model of integrated thinking processes, which can support computer programming students. Keywords: Computer programming, education, mixed methods research, thinking processes.  Disciplines: Computer programming, education, psychology

Structured Parallel Programming Patterns for Efficient Computation

CERN Document Server

McCool, Michael; Robison, Arch

2012-01-01

Programming is now parallel programming. Much as structured programming revolutionized traditional serial programming decades ago, a new kind of structured programming, based on patterns, is relevant to parallel programming today. Parallel computing experts and industry insiders Michael McCool, Arch Robison, and James Reinders describe how to design and implement maintainable and efficient parallel algorithms using a pattern-based approach. They present both theory and practice, and give detailed concrete examples using multiple programming models. Examples are primarily given using two of th

SNOW: a digital computer program for the simulation of ion beam devices

International Nuclear Information System (INIS)

Boers, J.E.

1980-08-01

A digital computer program, SNOW, has been developed for the simulation of dense ion beams. The program simulates the plasma expansion cup (but not the plasma source itself), the acceleration region, and a drift space with neutralization if desired. The ion beam is simulated by computing representative trajectories through the device. The potentials are simulated on a large rectangular matrix array which is solved by iterative techniques. Poisson's equation is solved at each point within the configuration using space-charge densities computed from the ion trajectories combined with background electron and/or ion distributions. The simulation methods are described in some detail along with examples of both axially-symmetric and rectangular beams. A detailed description of the input data is presented

Describing of elements IO field in a testing computer program

Directory of Open Access Journals (Sweden)

Igor V. Loshkov

2017-01-01

Full Text Available A standard of describing the process of displaying interactive windows on a computer monitor, through which an output of questions and input of answers are implemented during computer testing, is presented in the article [11]. According to the proposed standard, the description of the process mentioned above is performed with a format line, containing element names, their parameters as well as grouping and auxiliary symbols. Program objects are described using elements of standard. The majority of objects create input and output windows on a computer monitor. The aim of our research was to develop a minimum possible set of elements of standard to perform mathematical and computer science testing.The choice of elements of the standard was conducted in parallel with the development and testing of the program that uses them. This approach made it possible to choose a sufficiently complete set of elements for testing in fields of study mentioned above. For the proposed elements, names were selected in such a way: firstly, they indicate their function and secondly, they coincide with the names of elements in other programming languages that are similar by function. Parameters, their names, their assignments and accepted values are proposed for the elements. The principle of name selection for the parameters was the same as for elements of the standard: the names should correspond to their assignments or coincide with names of similar parameters in other programming languages. The parameters define properties of objects. Particularly, while the elements of standard create windows, the parameters define object properties (location, size, appearance and the sequence in which windows are created. All elements of standard, proposed in this article are composed in a table, the columns of which have names and functions of these elements. Inside the table, the elements of standard are grouped row by row into four sets: input elements, output elements, input

Method and computer program product for maintenance and modernization backlogging

Science.gov (United States)

Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

2013-02-19

According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

Towards optimizing server performance in an educational MMORPG for teaching computer programming

Science.gov (United States)

Malliarakis, Christos; Satratzemi, Maya; Xinogalos, Stelios

2013-10-01

Web-based games have become significantly popular during the last few years. This is due to the gradual increase of internet speed, which has led to the ongoing multiplayer games development and more importantly the emergence of the Massive Multiplayer Online Role Playing Games (MMORPG) field. In parallel, similar technologies called educational games have started to be developed in order to be put into practice in various educational contexts, resulting in the field of Game Based Learning. However, these technologies require significant amounts of resources, such as bandwidth, RAM and CPU capacity etc. These amounts may be even larger in an educational MMORPG game that supports computer programming education, due to the usual inclusion of a compiler and the constant client/server data transmissions that occur during program coding, possibly leading to technical issues that could cause malfunctions during learning. Thus, the determination of the elements that affect the overall games resources' load is essential so that server administrators can configure them and ensure educational games' proper operation during computer programming education. In this paper, we propose a new methodology with which we can achieve monitoring and optimization of the load balancing, so that the essential resources for the creation and proper execution of an educational MMORPG for computer programming can be foreseen and bestowed without overloading the system.

The NEA computer program library: a possible GDMS application

International Nuclear Information System (INIS)

Schuler, W.

1978-01-01

NEA Computer Program library maintains a series of eleven sequential computer files, used for linked applications in managing their stock of computer codes for nuclear reactor calculations, storing index and program abstract information, and administering their service to requesters. The high data redundancy beween the files suggests that a data base approach would be valid and this paper suggests a possible 'schema' for an CODASYL GDMS

78 FR 15734 - Privacy Act of 1974; Computer Matching Program

Science.gov (United States)

2013-03-12

... 1974; Computer Matching Program AGENCY: Department of Homeland Security/U.S. Citizenship and... computer matching program between the Department of Homeland Security/U.S. Citizenship and Immigration... Protection Act of 1988 (Pub. L. 100-503) and the Computer Matching and Privacy Protection Amendments of 1990...

78 FR 38724 - Privacy Act of 1974; Computer Matching Program

Science.gov (United States)

2013-06-27

... 1974; Computer Matching Program AGENCY: Department of Homeland Security/U.S. Citizenship and... Agreement that establishes a computer matching program between the Department of Homeland Security/U.S... and Privacy Protection Act of 1988 (Pub. L. 100-503) and the Computer Matching and Privacy Protection...

78 FR 15733 - Privacy Act of 1974; Computer Matching Program

Science.gov (United States)

2013-03-12

... 1974; Computer Matching Program AGENCY: Department of Homeland Security/U.S. Citizenship and... computer matching program between the Department of Homeland Security/U.S. Citizenship and Immigration... Protection Act of 1988 (Pub. L. 100-503) and the Computer Matching and Privacy Protection Amendments of 1990...

General design methodology applied to the research domain of physical programming for computer illiterate

CSIR Research Space (South Africa)

Smith, Andrew C

2011-09-01

Full Text Available The authors discuss the application of the 'general design methodology‘ in the context of a physical computing project. The aim of the project was to design and develop physical objects that could serve as metaphors for computer programming elements...

HAL/SM language specification. [programming languages and computer programming for space shuttles

Science.gov (United States)

Williams, G. P. W., Jr.; Ross, C.

1975-01-01

A programming language is presented for the flight software of the NASA Space Shuttle program. It is intended to satisfy virtually all of the flight software requirements of the space shuttle. To achieve this, it incorporates a wide range of features, including applications-oriented data types and organizations, real time control mechanisms, and constructs for systems programming tasks. It is a higher order language designed to allow programmers, analysts, and engineers to communicate with the computer in a form approximating natural mathematical expression. Parts of the English language are combined with standard notation to provide a tool that readily encourages programming without demanding computer hardware expertise. Block diagrams and flow charts are included. The semantics of the language is discussed.

SEDRX: A computer program for the simulation Si(Li) and Ge(Hp) x-ray detectors efficiency

International Nuclear Information System (INIS)

Benamar, M.A.; Benouali, A.; Tchantchane, A.; Azbouche, A.; Tobbeche, S. Centre de Developpement des Techniques Nucleaires, Algiers; Labo. des Techniques Nucleaires)

1992-12-01

The difficulties encountered in measuring the x-ray detectors efficiency has motivated to develop a computer program to simulate this parameter. this program computes the efficiency of detectors as a function of energy. the computation of this parameter is based on the fitting coefficients of absorption in the case of photoelectric, coherent and incoherent factors. These coefficients are given by Mc Master library or may be determined by the interpolation based on cubic splines

POST-CASKETSS: a graphic computer program for thermal and structural analysis of nuclear fuel shipping casks

International Nuclear Information System (INIS)

Ikushima, Takeshi

1988-12-01

A computer program POST-CASKETSS has been developed for the purpose of calculation result representation for thermal and structural analysis computer code system CASKETSS (CASKETSS means a modular code system for CASK Evaluation code system for Thermal and Structural Safety). Main features of POST-CASKETSS are as follows; (1) Function of calculation result representation for thermal and structural analysis computer programs is provided in the program. (2) Two and three dimensional graphic representation for finite element and finite difference programs are available in the program. (3) The capacity of graphics of geometry, temperature contor and temperature-time curve are provided for thermal analysis. (4) The capacity of graphics of geometry, deformation, stress contor, displacement-time curve, velocity-time curve, acceleration-time curve, stress-time curve, force-time curve and moment-time curve are provided for structural analysis. (5) This computer program operates both the time shearing system and the batch system. In the paper, brief illustration of calculation method, input data and sample calculations are presented. (author)

Activity computer program for calculating ion irradiation activation

Science.gov (United States)

Palmer, Ben; Connolly, Brian; Read, Mark

2017-07-01

A computer program, Activity, was developed to predict the activity and gamma lines of materials irradiated with an ion beam. It uses the TENDL (Koning and Rochman, 2012) [1] proton reaction cross section database, the Stopping and Range of Ions in Matter (SRIM) (Biersack et al., 2010) code, a Nuclear Data Services (NDS) radioactive decay database (Sonzogni, 2006) [2] and an ENDF gamma decay database (Herman and Chadwick, 2006) [3]. An extended version of Bateman's equation is used to calculate the activity at time t, and this equation is solved analytically, with the option to also solve by numeric inverse Laplace Transform as a failsafe. The program outputs the expected activity and gamma lines of the activated material.

CORCON: a computer program for modelling molten fuel/concrete interactions

International Nuclear Information System (INIS)

Muir, J.F.

1980-01-01

A computer program modelling the interaction between molten core materials and structural concrete is being developed to provide a capability for making quantitative estimates of reactor fuel-melt accidents. The principal phenomenological models, inter-component heat transfer, concrete erosion, and melt/gas chemical reactions, are described. A code test comparison calculation is discussed

Computer programs in accelerator physics

International Nuclear Information System (INIS)

Keil, E.

1984-01-01

Three areas of accelerator physics are discussed in which computer programs have been applied with much success: i) single-particle beam dynamics in circular machines, i.e. the design and matching of machine lattices; ii) computations of electromagnetic fields in RF cavities and similar objects, useful for the design of RF cavities and for the calculation of wake fields; iii) simulation of betatron and synchrotron oscillations in a machine with non-linear elements, e.g. sextupoles, and of bunch lengthening due to longitudinal wake fields. (orig.)

Development of computer program ENMASK for prediction of residual environmental masking-noise spectra, from any three independent environmental parameters

Energy Technology Data Exchange (ETDEWEB)

Chang, Y.-S.; Liebich, R. E.; Chun, K. C.

2000-03-31

Residual environmental sound can mask intrusive4 (unwanted) sound. It is a factor that can affect noise impacts and must be considered both in noise-impact studies and in noise-mitigation designs. Models for quantitative prediction of sensation level (audibility) and psychological effects of intrusive noise require an input with 1/3 octave-band spectral resolution of environmental masking noise. However, the majority of published residual environmental masking-noise data are given with either octave-band frequency resolution or only single A-weighted decibel values. A model has been developed that enables estimation of 1/3 octave-band residual environmental masking-noise spectra and relates certain environmental parameters to A-weighted sound level. This model provides a correlation among three environmental conditions: measured residual A-weighted sound-pressure level, proximity to a major roadway, and population density. Cited field-study data were used to compute the most probable 1/3 octave-band sound-pressure spectrum corresponding to any selected one of these three inputs. In turn, such spectra can be used as an input to models for prediction of noise impacts. This paper discusses specific algorithms included in the newly developed computer program ENMASK. In addition, the relative audibility of the environmental masking-noise spectra at different A-weighted sound levels is discussed, which is determined by using the methodology of program ENAUDIBL.

Radioimmunoassay data processing program for IBM PC computers

International Nuclear Information System (INIS)

1989-06-01

The Medical Applications Section of the International Atomic Energy Agency (IAEA) has previously developed several programs for use on the Hewlett-Packard HP-41C programmable calculator to facilitate better quality control in radioimmunoassay through improved data processing. The program described in this document is designed for off-line analysis using an IBM PC (or compatible) for counting data from standards and unknown specimens (i.e. for analysis of counting data previously recorded by a counter), together with internal quality control (IQC) data both within and between batch. The greater computing power of the IBM PC has enabled the imprecision profile and IQC control curves which were unavailable on the HP-41C version. It is intended that the program would make available good data processing capability to laboratories having limited financial resources and serious problems of quality control. 3 refs

New Mexico district work-effort analysis computer program

Science.gov (United States)

Hiss, W.L.; Trantolo, A.P.; Sparks, J.L.

1972-01-01

The computer program (CAN 2) described in this report is one of several related programs used in the New Mexico District cost-analysis system. The work-effort information used in these programs is accumulated and entered to the nearest hour on forms completed by each employee. Tabulating cards are punched directly from these forms after visual examinations for errors are made. Reports containing detailed work-effort data itemized by employee within each project and account and by account and project for each employee are prepared for both current-month and year-to-date periods by the CAN 2 computer program. An option allowing preparation of reports for a specified 3-month period is provided. The total number of hours worked on each account and project and a grand total of hours worked in the New Mexico District is computed and presented in a summary report for each period. Work effort not chargeable directly to individual projects or accounts is considered as overhead and can be apportioned to the individual accounts and projects on the basis of the ratio of the total hours of work effort for the individual accounts or projects to the total New Mexico District work effort at the option of the user. The hours of work performed by a particular section, such as General Investigations or Surface Water, are prorated and charged to the projects or accounts within the particular section. A number of surveillance or buffer accounts are employed to account for the hours worked on special events or on those parts of large projects or accounts that require a more detailed analysis. Any part of the New Mexico District operation can be separated and analyzed in detail by establishing an appropriate buffer account. With the exception of statements associated with word size, the computer program is written in FORTRAN IV in a relatively low and standard language level to facilitate its use on different digital computers. The program has been run only on a Control Data Corporation

Injecting Artificial Memory Errors Into a Running Computer Program

Science.gov (United States)

Bornstein, Benjamin J.; Granat, Robert A.; Wagstaff, Kiri L.

2008-01-01

Single-event upsets (SEUs) or bitflips are computer memory errors caused by radiation. BITFLIPS (Basic Instrumentation Tool for Fault Localized Injection of Probabilistic SEUs) is a computer program that deliberately injects SEUs into another computer program, while the latter is running, for the purpose of evaluating the fault tolerance of that program. BITFLIPS was written as a plug-in extension of the open-source Valgrind debugging and profiling software. BITFLIPS can inject SEUs into any program that can be run on the Linux operating system, without needing to modify the program s source code. Further, if access to the original program source code is available, BITFLIPS offers fine-grained control over exactly when and which areas of memory (as specified via program variables) will be subjected to SEUs. The rate of injection of SEUs is controlled by specifying either a fault probability or a fault rate based on memory size and radiation exposure time, in units of SEUs per byte per second. BITFLIPS can also log each SEU that it injects and, if program source code is available, report the magnitude of effect of the SEU on a floating-point value or other program variable.

The Outlook for Computer Professions: 1985 Rewrites the Program.

Science.gov (United States)

Drake, Larry

1986-01-01

The author states that graduates of junior college programs who learn COBOL will continue to find jobs, but employers will increasingly seek college graduates when filling positions for computer programers and systems analysts. Areas of growth for computer applications (services, military, data communications, and artificial intelligence) are…

The Victorian State Computer Education Committee’s Seeding Pair In-Service Program: Two Case Studies

OpenAIRE

Keane , William ,

2014-01-01

International audience; Following the introduction of microcomputers into schools in the late 1970s, National Policy was developed which focused on the use of computers in non-computing subjects. The Victorian strategy for the implementation of the National Computers in Education Program was the development of a week-long in-service course which aimed to develop seeding pairs of teachers who would act as change agents when they returned to school. This chapter looks back at the case studies o...

STARS: An Integrated, Multidisciplinary, Finite-Element, Structural, Fluids, Aeroelastic, and Aeroservoelastic Analysis Computer Program

Science.gov (United States)

Gupta, K. K.

1997-01-01

A multidisciplinary, finite element-based, highly graphics-oriented, linear and nonlinear analysis capability that includes such disciplines as structures, heat transfer, linear aerodynamics, computational fluid dynamics, and controls engineering has been achieved by integrating several new modules in the original STARS (STructural Analysis RoutineS) computer program. Each individual analysis module is general-purpose in nature and is effectively integrated to yield aeroelastic and aeroservoelastic solutions of complex engineering problems. Examples of advanced NASA Dryden Flight Research Center projects analyzed by the code in recent years include the X-29A, F-18 High Alpha Research Vehicle/Thrust Vectoring Control System, B-52/Pegasus Generic Hypersonics, National AeroSpace Plane (NASP), SR-71/Hypersonic Launch Vehicle, and High Speed Civil Transport (HSCT) projects. Extensive graphics capabilities exist for convenient model development and postprocessing of analysis results. The program is written in modular form in standard FORTRAN language to run on a variety of computers, such as the IBM RISC/6000, SGI, DEC, Cray, and personal computer; associated graphics codes use OpenGL and IBM/graPHIGS language for color depiction. This program is available from COSMIC, the NASA agency for distribution of computer programs.

HOME COMPUTER USE AND THE DEVELOPMENT OF HUMAN CAPITAL*

Science.gov (United States)

Malamud, Ofer; Pop-Eleches, Cristian

2012-01-01

This paper uses a regression discontinuity design to estimate the effect of home computers on child and adolescent outcomes by exploiting a voucher program in Romania. Our main results indicate that home computers have both positive and negative effects on the development of human capital. Children who won a voucher to purchase a computer had significantly lower school grades but show improved computer skills. There is also some evidence that winning a voucher increased cognitive skills, as measured by Raven’s Progressive Matrices. We do not find much evidence for an effect on non-cognitive outcomes. Parental rules regarding homework and computer use attenuate the effects of computer ownership, suggesting that parental monitoring and supervision may be important mediating factors. PMID:22719135

Development of computer aided engineering system for TRAC applications

International Nuclear Information System (INIS)

Arai, Kenji; Itoya, Seihiro; Uematsu, Hitoshi; Tsunoyama, Shigeaki

1990-01-01

An advanced best estimate computer program for nuclear reactor transient analysis, TRAC has been extensively used to carry out various thermal hydraulic calculations in the nuclear engineering field, because of its versatility. To perform efficiently a wide variety of TRAC calculation, the efficient utilization of computers and the convenient environment for input and output processing is necessary. We have applied a computer network comprising a super-computer, engineering work stations and personal computers to TRAC calculations and have assigned the appropriate functions to each computer. We have also been developing an interactive graphics system for input and output processing on an EWS. This hardware and software environment can improve the effectiveness of TRAC utilization for various thermal hydraulic calculations. (author)

The Development of an Interactive Computer-Based Training Program for Timely and Humane On-Farm Pig Euthanasia.

Science.gov (United States)

Mullins, Caitlyn R; Pairis-Garcia, Monique D; Campler, Magnus R; Anthony, Raymond; Johnson, Anna K; Coleman, Grahame J; Rault, Jean-Loup

2018-02-05

With extensive knowledge and training in the prevention, management, and treatment of disease conditions in animals, veterinarians play a critical role in ensuring good welfare on swine farms by training caretakers on the importance of timely euthanasia. To assist veterinarians and other industry professionals in training new and seasoned caretakers, an interactive computer-based training program was created. It consists of three modules, each containing five case studies, which cover three distinct production stages (breeding stock, piglets, and wean to grower-finisher pigs). Case study development was derived from five specific euthanasia criteria defined in the 2015 Common Swine Industry Audit, a nationally recognized auditing program used in the US. Case studies provide information regarding treatment history, clinical signs, and condition severity of the pig and prompt learners to make management decisions regarding pig treatment and care. Once a decision is made, feedback is provided so learners understand the appropriateness of their decision compared to current industry guidelines. In addition to training farm personnel, this program may also be a valuable resource if incorporated into veterinary, graduate, and continuing education curricula. This innovative tool represents the first interactive euthanasia-specific training program in the US swine industry and offers the potential to improve timely and humane on-farm pig euthanasia.

Control program for punched paper tape for the PDP-8/1 computer

International Nuclear Information System (INIS)

German, U.

1976-01-01

A program was developed for the PDP-8/1 computer to control the punched paper tape supplied by the measuring instruments. Any departure from the program is detected by an optical reader which stops the tape and displays the error on an accumulator. This program which is suitable for large amounts of data punched on paper tape has been in use at the Beer-Sheva laboratories for detecting errors in the sample changing operation. (B.G.)

Practical methods to improve the development of computational software

International Nuclear Information System (INIS)

Osborne, A. G.; Harding, D. W.; Deinert, M. R.

2013-01-01

The use of computation has become ubiquitous in science and engineering. As the complexity of computer codes has increased, so has the need for robust methods to minimize errors. Past work has show that the number of functional errors is related the number of commands that a code executes. Since the late 1960's, major participants in the field of computation have encouraged the development of best practices for programming to help reduce coder induced error, and this has lead to the emergence of 'software engineering' as a field of study. Best practices for coding and software production have now evolved and become common in the development of commercial software. These same techniques, however, are largely absent from the development of computational codes by research groups. Many of the best practice techniques from the professional software community would be easy for research groups in nuclear science and engineering to adopt. This paper outlines the history of software engineering, as well as issues in modern scientific computation, and recommends practices that should be adopted by individual scientific programmers and university research groups. (authors)

Meteorological Development Laboratory Student Career Experience Program

Science.gov (United States)

McCalla, C., Sr.

2007-12-01

The National Oceanic and Atmospheric Administration's (NOAA) National Weather Service (NWS) provides weather, hydrologic, and climate forecasts and warnings for the protection of life and property and the enhancement of the national economy. The NWS's Meteorological Development Laboratory (MDL) supports this mission by developing meteorological prediction methods. Given this mission, NOAA, NWS, and MDL all have a need to continually recruit talented scientists. One avenue for recruiting such talented scientist is the Student Career Experience Program (SCEP). Through SCEP, MDL offers undergraduate and graduate students majoring in meteorology, computer science, mathematics, oceanography, physics, and statistics the opportunity to alternate full-time paid employment with periods of full-time study. Using SCEP as a recruiting vehicle, MDL has employed students who possess some of the very latest technical skills and knowledge needed to make meaningful contributions to projects within the lab. MDL has recently expanded its use of SCEP and has increased the number of students (sometimes called co- ops) in its program. As a co-op, a student can expect to develop and implement computer based scientific techniques, participate in the development of statistical algorithms, assist in the analysis of meteorological data, and verify forecasts. This presentation will focus on describing recruitment, projects, and the application process related to MDL's SCEP. In addition, this presentation will also briefly explore the career paths of students who successfully completed the program.

A REDUCE program for symbolic computation of Puiseux expansions

International Nuclear Information System (INIS)

Gerdt, V.P.; Tiller, P.

1991-01-01

The program is described for computation of Puiseux expansions of algebraic functions. The Newton diagram method is used for construction of initial coefficients of all the Puiseux series at the given point. The program is written in computer algebra language Reduce. Some illustrative examples are given. 20 refs

Computer programs for optical dendrometer measurements of standing tree profiles

Science.gov (United States)

Jacob R. Beard; Thomas G. Matney; Emily B. Schultz

2015-01-01

Tree profile equations are effective volume predictors. Diameter data for building these equations are collected from felled trees using diameter tapes and calipers or from standing trees using optical dendrometers. Developing and implementing a profile function from the collected data is a tedious and error prone task. This study created a computer program, Profile...

Multi-Language Programming Environments for High Performance Java Computing

Directory of Open Access Journals (Sweden)

Vladimir Getov

1999-01-01

Full Text Available Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI tool which provides application programmers wishing to use Java with immediate accessibility to existing scientific packages. The JCI tool also facilitates rapid development and reuse of existing code. These benefits are provided at minimal cost to the programmer. While beneficial to the programmer, the additional advantages of mixed‐language programming in terms of application performance and portability are addressed in detail within the context of this paper. In addition, we discuss how the JCI tool is complementing other ongoing projects such as IBM’s High‐Performance Compiler for Java (HPCJ and IceT’s metacomputing environment.

The Caltech Concurrent Computation Program - Project description

Science.gov (United States)

Fox, G.; Otto, S.; Lyzenga, G.; Rogstad, D.

1985-01-01

The Caltech Concurrent Computation Program wwhich studies basic issues in computational science is described. The research builds on initial work where novel concurrent hardware, the necessary systems software to use it and twenty significant scientific implementations running on the initial 32, 64, and 128 node hypercube machines have been constructed. A major goal of the program will be to extend this work into new disciplines and more complex algorithms including general packages that decompose arbitrary problems in major application areas. New high-performance concurrent processors with up to 1024-nodes, over a gigabyte of memory and multigigaflop performance are being constructed. The implementations cover a wide range of problems in areas such as high energy and astrophysics, condensed matter, chemical reactions, plasma physics, applied mathematics, geophysics, simulation, CAD for VLSI, graphics and image processing. The products of the research program include the concurrent algorithms, hardware, systems software, and complete program implementations.

Heat exchanger performance analysis programs for the personal computer

International Nuclear Information System (INIS)

Putman, R.E.

1992-01-01

Numerous utility industry heat exchange calculations are repetitive and thus lend themselves to being performed on a Personal Computer. These programs may be regarded as engineering tools which, when put together, can form a Toolbox. However, the practicing Results Engineer in the utility industry desires not only programs that are robust as well as easy to use but can also be used both on desktop and laptop PC's. The latter also offer the opportunity to take the computer into the plant or control room, and use it there to process test or operating data right on the spot. Most programs evolve through the needs which arise in the course of day-to-day work. This paper describes several of the more useful programs of this type and outlines some of the guidelines to be followed when designing personal computer programs for use by the practicing Results Engineer

Overview of the DIII-D program computer systems

International Nuclear Information System (INIS)

McHarg, B.B. Jr.

1997-11-01

Computer systems pervade every aspect of the DIII-D National Fusion Research program. This includes real-time systems acquiring experimental data from data acquisition hardware; cpu server systems performing short term and long term data analysis; desktop activities such as word processing, spreadsheets, and scientific paper publication; and systems providing mechanisms for remote collaboration. The DIII-D network ties all of these systems together and connects to the ESNET wide area network. This paper will give an overview of these systems, including their purposes and functionality and how they connect to other systems. Computer systems include seven different types of UNIX systems (HP-UX, REALIX, SunOS, Solaris, Digital UNIX, Ultrix, and IRIX), OpenVMS systems (both BAX and Alpha), MACintosh, Windows 95, and more recently Windows NT systems. Most of the network internally is ethernet with some use of FDDI. A T3 link connects to ESNET and thus to the Internet. Recent upgrades to the network have notably improved its efficiency, but the demand for bandwidth is ever increasing. By means of software and mechanisms still in development, computer systems at remote sites are playing an increasing role both in accessing and analyzing data and even participating in certain controlling aspects for the experiment. The advent of audio/video over the interest is now presenting a new means for remote sites to participate in the DIII-D program

PUMN: a radiation damage simulation computer program for the WINERY system

International Nuclear Information System (INIS)

Kuspa, J.P.

1976-01-01

The WINERY Radiation Damage Computer Simulation System will attempt to solve the entire radiation damage problem from the incident radiation to the property changes which occur in the material, using a set of interrelated computer programs. Computer simulation may be indispensable to the study of the radiation damage to materials in breeder and fusion reactors. WINERY is introduced with this work, and one portion of the system, the PUMN program, is developed and used to obtain important radiation damage results with Fe 3 Al crystal. PUMN is a program which simulates the response of the atoms in a crystal to a knock-on atom. It yields the damage configuration of the crystal by considering the dynamic interaction of all the atoms of the computational cell, up to 1000 atoms. The trajectories of the atoms are calculated using the Nordsieck Method, which has a prediction step based upon Taylor series expansions of the position and its first five time derivatives, and has a correction sequence which uses coefficients which have been optimized for efficiency and accuracy. Other features, such as restart files, automatic time step control, and crystal extension, make PUMN a versatile program which can simulate cases of relatively high knock-on energy, at least up to 500 eV. The PUMN program provides the WINERY system with results for the number of displacements, N/sub d/, due to knock-on atoms with various energies. This study dealt exclusively with Fe 3 Al. The values of N/sub d/ for Fe 3 Al were obtained at two different energies, 100 eV and 500 eV, for a variety of initial directions

Development and benchmark verification of a parallelized Monte Carlo burnup calculation program MCBMPI

International Nuclear Information System (INIS)

Yang Wankui; Liu Yaoguang; Ma Jimin; Yang Xin; Wang Guanbo

2014-01-01

MCBMPI, a parallelized burnup calculation program, was developed. The program is modularized. Neutron transport calculation module employs the parallelized MCNP5 program MCNP5MPI, and burnup calculation module employs ORIGEN2, with the MPI parallel zone decomposition strategy. The program system only consists of MCNP5MPI and an interface subroutine. The interface subroutine achieves three main functions, i.e. zone decomposition, nuclide transferring and decaying, data exchanging with MCNP5MPI. Also, the program was verified with the Pressurized Water Reactor (PWR) cell burnup benchmark, the results showed that it's capable to apply the program to burnup calculation of multiple zones, and the computation efficiency could be significantly improved with the development of computer hardware. (authors)

Computer programs for capital cost estimation, lifetime economic performance simulation, and computation of cost indexes for laser fusion and other advanced technology facilities

International Nuclear Information System (INIS)

Pendergrass, J.H.

1978-01-01

Three FORTRAN programs, CAPITAL, VENTURE, and INDEXER, have been developed to automate computations used in assessing the economic viability of proposed or conceptual laser fusion and other advanced-technology facilities, as well as conventional projects. The types of calculations performed by these programs are, respectively, capital cost estimation, lifetime economic performance simulation, and computation of cost indexes. The codes permit these three topics to be addressed with considerable sophistication commensurate with user requirements and available data

PRE-CASKETSS: an input data generation computer program for thermal and structural analysis of nuclear fuel shipping casks

International Nuclear Information System (INIS)

Ikushima, Takeshi

1988-12-01

A computer program PRE-CASKETSS has been developed for the purpose of input data generation for thermal and structural analysis computer code system CASKETSS (CASKETSS means a modular code system for CASK Evaluation code system for Thermal and Structural Safety). Main features of PRE-CASKETSS are as follow; (1) Function of input data generation for thermal and structural analysis computer programs is provided in the program. (2) Two- and three-dimensional mesh generation for finite element and finite difference programs are available in the program. (3) The capacity of the material input data generation are provided in the program. (4) The boundary conditions, the load conditions and the initial conditions are capable in the program. (5) This computer program operate both the time shearing system and the batch system. In the paper, brief illustration of calculation method, input data and sample calculations are presented. (author)

Algebraic computing program for studying the gauge theory

International Nuclear Information System (INIS)

Zet, G.

2005-01-01

An algebraic computing program running on Maple V platform is presented. The program is devoted to the study of the gauge theory with an internal Lie group as local symmetry. The physical quantities (gauge potentials, strength tensors, dual tensors etc.) are introduced either as equations in terms of previous defined quantities (tensors), or by manual entry of the component values. The components of the strength tensor and of its dual are obtained with respect to a given metric of the space-time used for describing the gauge theory. We choose a Minkowski space-time endowed with spherical symmetry and give some example of algebraic computing that are adequate for studying electroweak or gravitational interactions. The field equations are also obtained and their solutions are determined using the DEtools facilities of the Maple V computing program. (author)

Development of computer program for simulation of an ice bank system operation, Part I: Mathematical modelling

Energy Technology Data Exchange (ETDEWEB)

Halasz, Boris; Grozdek, Marino; Soldo, Vladimir [Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lucica 5, 10 000 Zagreb (Croatia)

2009-09-15

Since the use of standard engineering methods in the process of an ice bank performance evaluation offers neither adequate flexibility nor accuracy, the aim of this research was to provide a powerful tool for an industrial design of an ice storage system allowing to account for the various design parameters and system arrangements over a wide range of time varying operating conditions. In this paper the development of a computer application for the prediction of an ice bank system operation is presented. Static, indirect, cool thermal storage systems with external ice on coil building/melting were considered. The mathematical model was developed by means of energy and mass balance relations for each component of the system and is basically divided into two parts, the model of an ice storage system and the model of a refrigeration unit. Heat transfer processes in an ice silo were modelled by use of empirical correlations while the performance of refrigeration unit components were based on manufacturers data. Programming and application design were made in Fortran 95 language standard. Input of data is enabled through drop down menus and dialog boxes, while the results are presented via figures, diagrams and data (ASCII) files. In addition, to demonstrate the necessity for development of simulation program a case study was performed. Simulation results clearly indicate that no simple engineering methods or rule of thumb principles could be utilised in order to validate performance of an ice bank system properly. (author)

Plane stress analysis of wood members using isoparametric finite elements, a computer program

Science.gov (United States)

Gary D. Gerhardt

1983-01-01

A finite element program is presented which computes displacements, strains, and stresses in wood members of arbitrary shape which are subjected to plane strain/stressloading conditions. This report extends a program developed by R. L. Taylor in 1977, by adding both the cubic isoparametric finite element and the capability to analyze nonisotropic materials. The...

Accelerated leach test development program

International Nuclear Information System (INIS)

Fuhrmann, M.; Pietrzak, R.F.; Heiser, J.; Franz, E.M.; Colombo, P.

1990-11-01

In FY 1989, a draft accelerated leach test for solidified waste was written. Combined test conditions that accelerate leaching were validated through experimental and modeling efforts. A computer program was developed that calculates test results and models leaching mechanisms. This program allows the user to determine if diffusion controls leaching and, if this is the case, to make projections of releases. Leaching mechanisms other than diffusion (diffusion plus source term partitioning and solubility limited leaching) are included in the program is indicators of other processes that may control leaching. Leach test data are presented and modeling results are discussed for laboratory scale waste forms composed of portland cement containing sodium sulfate salt, portland cement containing incinerator ash, and vinyl ester-styrene containing sodium sulfate. 16 refs., 38 figs., 5 tabs

Computer program for computing the properties of seventeen fluids. [cryogenic liquids

Science.gov (United States)

Brennan, J. A.; Friend, D. G.; Arp, V. D.; Mccarty, R. D.

1992-01-01

The present study describes modifications and additions to the MIPROPS computer program for calculating the thermophysical properties of 17 fluids. These changes include adding new fluids, new properties, and a new interface to the program. The new program allows the user to select the input and output parameters and the units to be displayed for each parameter. Fluids added to the MIPROPS program are carbon dioxide, carbon monoxide, deuterium, helium, normal hydrogen, and xenon. The most recent modifications to the MIPROPS program are the addition of viscosity and thermal conductivity correlations for parahydrogen and the addition of the fluids normal hydrogen and xenon. The recently added interface considerably increases the program's utility.

Vehicle systems and payload requirements evaluation. [computer programs for identifying launch vehicle system requirements

Science.gov (United States)

Rea, F. G.; Pittenger, J. L.; Conlon, R. J.; Allen, J. D.

1975-01-01

Techniques developed for identifying launch vehicle system requirements for NASA automated space missions are discussed. Emphasis is placed on development of computer programs and investigation of astrionics for OSS missions and Scout. The Earth Orbit Mission Program - 1 which performs linear error analysis of launch vehicle dispersions for both vehicle and navigation system factors is described along with the Interactive Graphic Orbit Selection program which allows the user to select orbits which satisfy mission requirements and to evaluate the necessary injection accuracy.

VASCOMP 2. The V/STOL aircraft sizing and performance computer program. Volume 6: User's manual, revision 3

Science.gov (United States)

Schoen, A. H.; Rosenstein, H.; Stanzione, K.; Wisniewski, J. S.

1980-01-01

This report describes the use of the V/STOL Aircraft Sizing and Performance Computer Program (VASCOMP II). The program is useful in performing aircraft parametric studies in a quick and cost efficient manner. Problem formulation and data development were performed by the Boeing Vertol Company and reflects the present preliminary design technology. The computer program, written in FORTRAN IV, has a broad range of input parameters, to enable investigation of a wide variety of aircraft. User oriented features of the program include minimized input requirements, diagnostic capabilities, and various options for program flexibility.

Development of integrated platform for computational material design

Energy Technology Data Exchange (ETDEWEB)

Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato [Center for Computational Science and Engineering, Fuji Research Institute Corporation (Japan); Hideaki, Koike [Advance Soft Corporation (Japan)

2003-07-01

The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned.

Development of integrated platform for computational material design

International Nuclear Information System (INIS)

Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato; Hideaki, Koike

2003-01-01

The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned

An overview of the SAFSIM computer program

International Nuclear Information System (INIS)

Dobranich, D.

1993-01-01

SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program that provides engineering simulations of user-specified flow networks at the system level. It includes fluid mechanics, heat transfer, and reactor dynamics capabilities. SAFSIM provides sufficient versatility to allow the simulation of almost any flow system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary goals of SAFSIM development. The current capabilities of SAFSIM are summarized and some sample applications are presented. It is applied here to a nuclear thermal propulsion system and nuclear rocket engine test facility

Factors that Influence the Success of Male and Female Computer Programming Students in College

Science.gov (United States)

Clinkenbeard, Drew A.

As the demand for a technologically skilled work force grows, experience and skill in computer science have become increasingly valuable for college students. However, the number of students graduating with computer science degrees is not growing proportional to this need. Traditionally several groups are underrepresented in this field, notably women and students of color. This study investigated elements of computer science education that influence academic achievement in beginning computer programming courses. The goal of the study was to identify elements that increase success in computer programming courses. A 38-item questionnaire was developed and administered during the Spring 2016 semester at California State University Fullerton (CSUF). CSUF is an urban public university comprised of about 40,000 students. Data were collected from three beginning programming classes offered at CSUF. In total 411 questionnaires were collected resulting in a response rate of 58.63%. Data for the study were grouped into three broad categories of variables. These included academic and background variables; affective variables; and peer, mentor, and role-model variables. A conceptual model was developed to investigate how these variables might predict final course grade. Data were analyzed using statistical techniques such as linear regression, factor analysis, and path analysis. Ultimately this study found that peer interactions, comfort with computers, computer self-efficacy, self-concept, and perception of achievement were the best predictors of final course grade. In addition, the analyses showed that male students exhibited higher levels of computer self-efficacy and self-concept compared to female students, even when they achieved comparable course grades. Implications and explanations of these findings are explored, and potential policy changes are offered.

The SX Solver: A Computer Program for Analyzing Solvent-Extraction Equilibria: Version 3.0

International Nuclear Information System (INIS)

Lumetta, Gregg J.

2001-01-01

A new computer program, the SX Solver, has been developed to analyze solvent-extraction equilibria. The program operates out of Microsoft Excel and uses the built-in Solver function to minimize the sum of the square of the residuals between measured and calculated distribution coefficients. The extraction of nitric acid by tributyl phosphate has been modeled to illustrate the programs use

Introduction of the ASP3D Computer Program for Unsteady Aerodynamic and Aeroelastic Analyses

Science.gov (United States)

Batina, John T.

2005-01-01

A new computer program has been developed called ASP3D (Advanced Small Perturbation 3D), which solves the small perturbation potential flow equation in an advanced form including mass-consistent surface and trailing wake boundary conditions, and entropy, vorticity, and viscous effects. The purpose of the program is for unsteady aerodynamic and aeroelastic analyses, especially in the nonlinear transonic flight regime. The program exploits the simplicity of stationary Cartesian meshes with the movement or deformation of the configuration under consideration incorporated into the solution algorithm through a planar surface boundary condition. The new ASP3D code is the result of a decade of developmental work on improvements to the small perturbation formulation, performed while the author was employed as a Senior Research Scientist in the Configuration Aerodynamics Branch at the NASA Langley Research Center. The ASP3D code is a significant improvement to the state-of-the-art for transonic aeroelastic analyses over the CAP-TSD code (Computational Aeroelasticity Program Transonic Small Disturbance), which was developed principally by the author in the mid-1980s. The author is in a unique position as the developer of both computer programs to compare, contrast, and ultimately make conclusions regarding the underlying formulations and utility of each code. The paper describes the salient features of the ASP3D code including the rationale for improvements in comparison with CAP-TSD. Numerous results are presented to demonstrate the ASP3D capability. The general conclusion is that the new ASP3D capability is superior to the older CAP-TSD code because of the myriad improvements developed and incorporated.

Computationally intensive econometrics using a distributed matrix-programming language.

Science.gov (United States)

Doornik, Jurgen A; Hendry, David F; Shephard, Neil

2002-06-15

This paper reviews the need for powerful computing facilities in econometrics, focusing on concrete problems which arise in financial economics and in macroeconomics. We argue that the profession is being held back by the lack of easy-to-use generic software which is able to exploit the availability of cheap clusters of distributed computers. Our response is to extend, in a number of directions, the well-known matrix-programming interpreted language Ox developed by the first author. We note three possible levels of extensions: (i) Ox with parallelization explicit in the Ox code; (ii) Ox with a parallelized run-time library; and (iii) Ox with a parallelized interpreter. This paper studies and implements the first case, emphasizing the need for deterministic computing in science. We give examples in the context of financial economics and time-series modelling.

Newnes circuit calculations pocket book with computer programs

CERN Document Server

Davies, Thomas J

2013-01-01

Newnes Circuit Calculations Pocket Book: With Computer Programs presents equations, examples, and problems in circuit calculations. The text includes 300 computer programs that help solve the problems presented. The book is comprised of 20 chapters that tackle different aspects of circuit calculation. The coverage of the text includes dc voltage, dc circuits, and network theorems. The book also covers oscillators, phasors, and transformers. The text will be useful to electrical engineers and other professionals whose work involves electronic circuitry.

A computer graphics program system for protein structure representation.

Science.gov (United States)

Ross, A M; Golub, E E

1988-01-01

We have developed a computer graphics program system for the schematic representation of several protein secondary structure analysis algorithms. The programs calculate the probability of occurrence of alpha-helix, beta-sheet and beta-turns by the method of Chou and Fasman and assign unique predicted structure to each residue using a novel conflict resolution algorithm based on maximum likelihood. A detailed structure map containing secondary structure, hydrophobicity, sequence identity, sequence numbering and the location of putative N-linked glycosylation sites is then produced. In addition, helical wheel diagrams and hydrophobic moment calculations can be performed to further analyze the properties of selected regions of the sequence. As they require only structure specification as input, the graphics programs can easily be adapted for use with other secondary structure prediction schemes. The use of these programs to analyze protein structure-function relationships is described and evaluated. PMID:2832829

Development of a computational program to planning and control of the IEA-R1 reactor maintenance

International Nuclear Information System (INIS)

Martins, Mauro Onofre; Madi Filho, Tufic

2013-01-01

Maintenance is an essential activity in nuclear reactors. The components of safety systems of an industrial plant should have a low probability of failure, especially if there is a high risk of accidents that may cause environmental damage. In nuclear facilities, the presence of security systems is a technical specification and a requirement for their license and operation. In order to manage the entire information flow from the maintenance of the IEA-R1, a computational program (software) was developed, which not only plans and control all the maintenance, but also updates the documents and records to safeguard the quality, ensuring the safe operation of the reactor. The software has access levels and provides detailed reports of all maintenance planned and implemented, together with an individual history of the equipment during its lifetime in the facility. This work presents all the stages of the software development, description, compatibility, application, advantages and results obtained experimentally. (author)

A Tangible Programming Tool for Children to Cultivate Computational Thinking

Science.gov (United States)

Wang, Danli; Liu, Zhen

2014-01-01

Game and creation are activities which have good potential for computational thinking skills. In this paper we present T-Maze, an economical tangible programming tool for children aged 5–9 to build computer programs in maze games by placing wooden blocks. Through the use of computer vision technology, T-Maze provides a live programming interface with real-time graphical and voice feedback. We conducted a user study with 7 children using T-Maze to play two levels of maze-escape games and create their own mazes. The results show that T-Maze is not only easy to use, but also has the potential to help children cultivate computational thinking like abstraction, problem decomposition, and creativity. PMID:24719575

A Tangible Programming Tool for Children to Cultivate Computational Thinking

Directory of Open Access Journals (Sweden)

Danli Wang

2014-01-01

Full Text Available Game and creation are activities which have good potential for computational thinking skills. In this paper we present T-Maze, an economical tangible programming tool for children aged 5–9 to build computer programs in maze games by placing wooden blocks. Through the use of computer vision technology, T-Maze provides a live programming interface with real-time graphical and voice feedback. We conducted a user study with 7 children using T-Maze to play two levels of maze-escape games and create their own mazes. The results show that T-Maze is not only easy to use, but also has the potential to help children cultivate computational thinking like abstraction, problem decomposition, and creativity.

Application of a newly developed software program for image quality assessment in cone-beam computed tomography.

Science.gov (United States)

de Oliveira, Marcus Vinicius Linhares; Santos, António Carvalho; Paulo, Graciano; Campos, Paulo Sergio Flores; Santos, Joana

2017-06-01

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

Application of a newly developed software program for image quality assessment in cone-beam computed tomography

International Nuclear Information System (INIS)

De Oliveira, Marcus Vinicius Linhares; Campos, Paulo Sergio Flores; Paulo, Graciano; Santos, Antonio Carvalho; Santos, Joana

2017-01-01

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT

Application of a newly developed software program for image quality assessment in cone-beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

De Oliveira, Marcus Vinicius Linhares; Campos, Paulo Sergio Flores [Federal Institute of Bahia, Salvador (Brazil); Paulo, Graciano; Santos, Antonio Carvalho; Santos, Joana [Coimbra Health School, Polytechnic Institute of Coimbra, Coimbra (Portugal)

2017-06-15

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

Starpc: a library for communication among tools on a parallel computer cluster. User's and developer's guide to Starpc

International Nuclear Information System (INIS)

Takemiya, Hiroshi; Yamagishi, Nobuhiro

2000-02-01

We report on a RPC(Remote Procedure Call)-based communication library, Starpc, for a parallel computer cluster. Starpc supports communication between Java Applets and C programs as well as between C programs. Starpc has the following three features. (1) It enables communication between Java Applets and C programs on an arbitrary computer without security violation, although Java Applets are supposed to communicate only with programs on the specific computer (Web server) in subject to a restriction on security. (2) Diverse network communication protocols are available on Starpc, because of using Nexus communication library developed at Argonne National Laboratory. (3) It works on many kinds of computers including eight parallel computers and four WS servers. In this report, the usage of Starpc and the development of applications using Starpc are described. (author)

K-TIF: a two-fluid computer program for downcomer flow dynamics. [PWR

Energy Technology Data Exchange (ETDEWEB)

Amsden, A.A.; Harlow, F.H.

1977-10-01

The K-TIF computer program has been developed for numerical solution of the time-varying dynamics of steam and water in a pressurized water reactor downcomer. The current status of physical and mathematical modeling is presented in detail. The report also contains a complete description of the numerical solution technique, a full description and listing of the computer program, instructions for its use, with a sample printout for a specific test problem. A series of calculations, performed with no change in the modeling parameters, shows consistent agreement with the experimental trends over a wide range of conditions, which gives confidence to the calculations as a basis for investigating the complicated physics of steam-water flows in the downcomer.

Using the Computer in Special Vocational Programs. Inservice Activities.

Science.gov (United States)

Lane, Kenneth; Ward, Raymond

This inservice manual is intended to assist vocational education teachers in using the techniques of computer-assisted instruction in special vocational education programs. Addressed in the individual units are the following topics: the basic principles of computer-assisted instruction (TRS-80 computers and typing on a computer keyboard); money…

Programs for Testing Processor-in-Memory Computing Systems

Science.gov (United States)

Katz, Daniel S.

2006-01-01

The Multithreaded Microbenchmarks for Processor-In-Memory (PIM) Compilers, Simulators, and Hardware are computer programs arranged in a series for use in testing the performances of PIM computing systems, including compilers, simulators, and hardware. The programs at the beginning of the series test basic functionality; the programs at subsequent positions in the series test increasingly complex functionality. The programs are intended to be used while designing a PIM system, and can be used to verify that compilers, simulators, and hardware work correctly. The programs can also be used to enable designers of these system components to examine tradeoffs in implementation. Finally, these programs can be run on non-PIM hardware (either single-threaded or multithreaded) using the POSIX pthreads standard to verify that the benchmarks themselves operate correctly. [POSIX (Portable Operating System Interface for UNIX) is a set of standards that define how programs and operating systems interact with each other. pthreads is a library of pre-emptive thread routines that comply with one of the POSIX standards.

Computer program user's manual for FIREFINDER digital topographic data verification library dubbing system

Science.gov (United States)

Ceres, M.; Heselton, L. R., III

1981-11-01

This manual describes the computer programs for the FIREFINDER Digital Topographic Data Verification-Library-Dubbing System (FFDTDVLDS), and will assist in the maintenance of these programs. The manual contains detailed flow diagrams and associated descriptions for each computer program routine and subroutine. Complete computer program listings are also included. This information should be used when changes are made in the computer programs. The operating system has been designed to minimize operator intervention.

Computer programs to make a Chart of the nuclides for WWW

International Nuclear Information System (INIS)

Nakagawa, Tsuneo; Katakura, Jun-ichi; Horiguchi, Takayoshi

1999-06-01

Computer programs to make a chart of the nuclides for World Wide Web (WWW) have been developed. The programs make a data file for WWW chart of the nuclides from a data file containing nuclide information in the format similar to ENSDF, by filling unknown half-lives with calculated ones. Then, the WWW chart of the nuclides in the gif format is created from the data file. The programs to make html files and image map files, to select a chart of selected nuclides, and to show various information of nuclides are included in the system. All the programs are written in C language. This report describes the formats of files, the programs and 1998 issue of Chart of the Nuclides made by means of the present programs. (author)

RECON: a computer program for analyzing repository economics. Documentation and user's manual. Revision 1

International Nuclear Information System (INIS)

Clark, L.L.; Schutz, M.E.; Luksic, A.T.

1985-07-01

From 1981 through 1984 the Pacific Northwest Laboratory has been developing a computer model named RECON to calculate repository costs from parametric data input. The objective of the program has been to develop the capability to evaluate the effect on costs of changes in repository design parameters and operating scenario assumptions. This report documents the development of the model through September of 1984. Included in the report are: (1) descriptions of model development and the underlying equations, assumptions and definitions; (2) descriptions of data input using either card images or an interactive data input program; and (3) detailed listings of the program and definitions of program variables. Cost estimates generated using the model have been verified against independent estimates and good agreement has been obtained. 2 refs

COLUMN2 - A computer program for simulating migration

International Nuclear Information System (INIS)

Nielsen, O.J.; Bo, P.; Carlsen, L.

1985-10-01

COLUMN2 is a 1D FORTRAN77 computer program designed for studies of the effects of various physicochemical processes on migration. It solves the solute transport equation and cant take into account dispersion, sorption, ion exchange, first and second order homogeneous chemical reactions. Spacial variations of input pulses and retention factors are possible. The method of solution is based on a finite difference discretion followed by the application of the method of characteristics and two separate grid systems. This report explains the mathematical and numerical methods used, describes the necessary input, contains a number of test examples, provides a listing of the program and explains how to acquire the program, adapt it to other computers and run it. This report serves as a manual for the program. (author)

Control programs of multichannel pulse height analyzer with CAMAC system using FACOM U-200 mini-computer

International Nuclear Information System (INIS)

Yamagishi, Kojiro

1978-02-01

The 4096 channel Pulse Height Analyzer (PHA) assembled with CAMAC plug-in units has been developed in JAERI. The PHA consists of ADC unit, CRT-display unit, and CAMAC plug-in units, which are memory-controller, MCA-timer, 4K words RAM memory and CRT-driver. The system is on-line connected to FACOM U-200 Mini-Computer through CAMAC interface unit Crate-controller. The softwares for on-line data acquisition of the system have been developed. These are four utility programs written in FORTRAN and two program packages written in assembler language FASP which are CAMAC Program Package and Basic Input/Output Program Package. CAMAC Program Package has 18 subroutine programs for control of CAMAC plug-in units from FACOM U-200 Mini-Computer; and Basic Input/Output Program Package has 26 subroutine programs to input/output data to/from a typewriter, keyboard, cassette magnetic tape and open reel magnetic tape. These subroutine programs are all FORTRAN callable. The PHA with CAMAC system is first outlined, and then usage is described in detail of four utility programs, CAMAC Program Package and Basic Input/Output Program Package. (auth.)

Accelerating Development of EV Batteries Through Computer-Aided Engineering (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Pesaran, A.; Kim, G. H.; Smith, K.; Santhanagopalan, S.

2012-12-01

The Department of Energy's Vehicle Technology Program has launched the Computer-Aided Engineering for Automotive Batteries (CAEBAT) project to work with national labs, industry and software venders to develop sophisticated software. As coordinator, NREL has teamed with a number of companies to help improve and accelerate battery design and production. This presentation provides an overview of CAEBAT, including its predictive computer simulation of Li-ion batteries known as the Multi-Scale Multi-Dimensional (MSMD) model framework. MSMD's modular, flexible architecture connects the physics of battery charge/discharge processes, thermal control, safety and reliability in a computationally efficient manner. This allows independent development of submodels at the cell and pack levels.

A Computer Program for Drip Irrigation System Design for Small Plots

Science.gov (United States)

Philipova, Nina; Nicheva, Olga; Kazandjiev, Valentin; Chilikova-Lubomirova, Mila

2012-12-01

A computer programhas been developed for design of surface drip irrigation system. It could be applied for calculation of small scale fields with an area up to 10 ha. The program includes two main parts: crop water requirements and hydraulic calculations of the system. It has been developed in Graphical User Interface in MATLAB and gives opportunity for selecting some parameters from tables such as: agro- physical soil properties, characteristics of the corresponding crop, climatic data. It allows the user of the program to assume and set a definite value, for example the emitter discharge, plot parameters and etc. Eight cases of system layout according to the water source layout and the number of plots of the system operation are laid into hydraulic section of the program. It includes the design of lateral, manifold, main line and pump calculations. The program has been compiled to work in Windows.

Computer codes developed in FRG to analyse hypothetical meltdown accidents

International Nuclear Information System (INIS)

Hassmann, K.; Hosemann, J.P.; Koerber, H.; Reineke, H.

1978-01-01

It is the purpose of this paper to give the status of all significant computer codes developed in the core melt-down project which is incorporated in the light water reactor safety research program of the Federal Ministry of Research and Technology. For standard pressurized water reactors, results of some computer codes will be presented, describing the course and the duration of the hypothetical core meltdown accident. (author)

WIMSTAR-4: a computer program for generating WIMS library data from ENDF/B

International Nuclear Information System (INIS)

Wilkin, G.B.

1981-08-01

WIMSTAR (Version 4) is a FORTRAN-IV computer program developed to generate data files for the WIMS lattice code library from the ENDF/B data base. The program must be used in conjunction with the AMPX-II system and has been designed for implementation as a module of that system. This report describes the structure, implementation and use of the AMPX/WIMSTAR system

Development of small scale cluster computer for numerical analysis

Science.gov (United States)

Zulkifli, N. H. N.; Sapit, A.; Mohammed, A. N.

2017-09-01

In this study, two units of personal computer were successfully networked together to form a small scale cluster. Each of the processor involved are multicore processor which has four cores in it, thus made this cluster to have eight processors. Here, the cluster incorporate Ubuntu 14.04 LINUX environment with MPI implementation (MPICH2). Two main tests were conducted in order to test the cluster, which is communication test and performance test. The communication test was done to make sure that the computers are able to pass the required information without any problem and were done by using simple MPI Hello Program where the program written in C language. Additional, performance test was also done to prove that this cluster calculation performance is much better than single CPU computer. In this performance test, four tests were done by running the same code by using single node, 2 processors, 4 processors, and 8 processors. The result shows that with additional processors, the time required to solve the problem decrease. Time required for the calculation shorten to half when we double the processors. To conclude, we successfully develop a small scale cluster computer using common hardware which capable of higher computing power when compare to single CPU processor, and this can be beneficial for research that require high computing power especially numerical analysis such as finite element analysis, computational fluid dynamics, and computational physics analysis.

Declarative Parallel Programming in Spreadsheet End-User Development

DEFF Research Database (Denmark)

Biermann, Florian

2016-01-01

Spreadsheets are first-order functional languages and are widely used in research and industry as a tool to conveniently perform all kinds of computations. Because cells on a spreadsheet are immutable, there are possibilities for implicit parallelization of spreadsheet computations. In this liter...... can directly apply results from functional array programming to a spreadsheet model of computations.......Spreadsheets are first-order functional languages and are widely used in research and industry as a tool to conveniently perform all kinds of computations. Because cells on a spreadsheet are immutable, there are possibilities for implicit parallelization of spreadsheet computations....... In this literature study, we provide an overview of the publications on spreadsheet end-user programming and declarative array programming to inform further research on parallel programming in spreadsheets. Our results show that there is a clear overlap between spreadsheet programming and array programming and we...

A computer program TRACK_P for studying proton tracks in PADC detectors

Directory of Open Access Journals (Sweden)

D. Nikezic

2016-01-01

Full Text Available A computer program for studying proton tracks in solid state nuclear track detectors was developed and described in this paper. The program was written in Fortran 90, with an additional tool for visualizing the track appearance as seen under the optical microscope in the transmission mode, which was written in the Python programming language. Measurable track parameters were determined and displayed in the application window and written in a data file. Three-dimensional representation of tracks was enabled. Examples of calculated tracks were also given in the present paper.

SHOCK-JR: a computer program to analyze impact response of shipping container

International Nuclear Information System (INIS)

Ikushima, Takeshi; Nakazato, Chikara; Shimoda, Osamu; Uchino, Mamoru.

1983-02-01

The report is provided for using a computer program, SHOCK-JR, which is used to analyze the impact response of shipping containers. Descriptions are the mathematical model, method of analysis, structures of the program and the input and output variables. The program solves the equations of motion for a one-dimensional, lumped mass and nonlinear spring model. The solution procedure uses Runge-Kutta-Gill and Newmark-β methods. SHOCK-JR is a revised version of SHOCK, which was developed by ORNL. In SHOCK-JR, SI dimension is used and graphical output is available. (author)

Introduction to programming multiple-processor computers

International Nuclear Information System (INIS)

Hicks, H.R.; Lynch, V.E.

1985-04-01

FORTRAN applications programs can be executed on multiprocessor computers in either a unitasking (traditional) or multitasking form. The latter allows a single job to use more than one processor simultaneously, with a consequent reduction in wall-clock time and, perhaps, the cost of the calculation. An introduction to programming in this environment is presented. The concepts of synchronization and data sharing using EVENTS and LOCKS are illustrated with examples. The strategy of strong synchronization and the use of synchronization templates are proposed. We emphasize that incorrect multitasking programs can produce irreproducible results, which makes debugging more difficult

Development and Evaluation of a Computer-Based, Self-Management Tool for People Recently Diagnosed with Type 2 Diabetes

Directory of Open Access Journals (Sweden)

Alison O. Booth

2016-01-01

Full Text Available Aim. The purpose of this study was to develop and evaluate a computer-based, dietary, and physical activity self-management program for people recently diagnosed with type 2 diabetes. Methods. The computer-based program was developed in conjunction with the target group and evaluated in a 12-week randomised controlled trial (RCT. Participants were randomised to the intervention (computer-program or control group (usual care. Primary outcomes were diabetes knowledge and goal setting (ADKnowl questionnaire, Diabetes Obstacles Questionnaire (DOQ measured at baseline and week 12. User feedback on the program was obtained via a questionnaire and focus groups. Results. Seventy participants completed the 12-week RCT (32 intervention, 38 control, mean age 59 (SD years. After completion there was a significant between-group difference in the “knowledge and beliefs scale” of the DOQ. Two-thirds of the intervention group rated the program as either good or very good, 92% would recommend the program to others, and 96% agreed that the information within the program was clear and easy to understand. Conclusions. The computer-program resulted in a small but statistically significant improvement in diet-related knowledge and user satisfaction was high. With some further development, this computer-based educational tool may be a useful adjunct to diabetes self-management. This trial is registered with clinicaltrials.gov NCT number NCT00877851.

On Computational Power of Quantum Read-Once Branching Programs

Directory of Open Access Journals (Sweden)

Farid Ablayev

2011-03-01

Full Text Available In this paper we review our current results concerning the computational power of quantum read-once branching programs. First of all, based on the circuit presentation of quantum branching programs and our variant of quantum fingerprinting technique, we show that any Boolean function with linear polynomial presentation can be computed by a quantum read-once branching program using a relatively small (usually logarithmic in the size of input number of qubits. Then we show that the described class of Boolean functions is closed under the polynomial projections.

Department of Energy Mathematical, Information, and Computational Sciences Division: High Performance Computing and Communications Program

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

This document is intended to serve two purposes. Its first purpose is that of a program status report of the considerable progress that the Department of Energy (DOE) has made since 1993, the time of the last such report (DOE/ER-0536, The DOE Program in HPCC), toward achieving the goals of the High Performance Computing and Communications (HPCC) Program. The second purpose is that of a summary report of the many research programs administered by the Mathematical, Information, and Computational Sciences (MICS) Division of the Office of Energy Research under the auspices of the HPCC Program and to provide, wherever relevant, easy access to pertinent information about MICS-Division activities via universal resource locators (URLs) on the World Wide Web (WWW).

Development of a safety and regulation systems simulation program II

International Nuclear Information System (INIS)

1985-05-01

This report describes the development of a safety and regulation systems simulation program under contract to the Atomic Energy Control Board of Canada. A systems logic interaction simulation (SLISIM) program was developed for the AECB's HP-1000 computer which operates in the interactive simulation (INSIM) program environment. The SLISIM program simulates the spatial neutron dynamics, the regulation of the reactor power and in this version the CANDU-PHW 600 MW(e) computerized shutdown systems' trip parameters. The modular concept and interactive capability of the INSIM environment provides the user with considerable flexibility of the setup and control of the simulation

Magnetic fusion energy and computers: the role of computing in magnetic fusion energy research and development

International Nuclear Information System (INIS)

1979-10-01

This report examines the role of computing in the Department of Energy magnetic confinement fusion program. The present status of the MFECC and its associated network is described. The third part of this report examines the role of computer models in the main elements of the fusion program and discusses their dependence on the most advanced scientific computers. A review of requirements at the National MFE Computer Center was conducted in the spring of 1976. The results of this review led to the procurement of the CRAY 1, the most advanced scientific computer available, in the spring of 1978. The utilization of this computer in the MFE program has been very successful and is also described in the third part of the report. A new study of computer requirements for the MFE program was conducted during the spring of 1979 and the results of this analysis are presented in the forth part of this report

Computer programs for the in-core fuel management of power reactors

International Nuclear Information System (INIS)

1981-08-01

This document gives a survey of the presently tested and used computer programs applicable to the in-core fuel management of light and heavy water moderated nuclear power reactors. Each computer program is described (provided that enough information was supplied) such that the nature of the physical problem solved and the basic mathematical or calculational approach are evident. In addition, further information regarding computer requirements, up-to-date applications and experiences and specific details concerning implementation, staff requirements, etc., are provided. Program procurement conditions, possible program implementation assistance and commercial conditions (where applicable) are given. (author)

Digital optical computers at the optoelectronic computing systems center

Science.gov (United States)

Jordan, Harry F.

1991-01-01

The Digital Optical Computing Program within the National Science Foundation Engineering Research Center for Opto-electronic Computing Systems has as its specific goal research on optical computing architectures suitable for use at the highest possible speeds. The program can be targeted toward exploiting the time domain because other programs in the Center are pursuing research on parallel optical systems, exploiting optical interconnection and optical devices and materials. Using a general purpose computing architecture as the focus, we are developing design techniques, tools and architecture for operation at the speed of light limit. Experimental work is being done with the somewhat low speed components currently available but with architectures which will scale up in speed as faster devices are developed. The design algorithms and tools developed for a general purpose, stored program computer are being applied to other systems such as optimally controlled optical communication networks.

Development of massively parallel quantum chemistry program SMASH

International Nuclear Information System (INIS)

Ishimura, Kazuya

2015-01-01

A massively parallel program for quantum chemistry calculations SMASH was released under the Apache License 2.0 in September 2014. The SMASH program is written in the Fortran90/95 language with MPI and OpenMP standards for parallelization. Frequently used routines, such as one- and two-electron integral calculations, are modularized to make program developments simple. The speed-up of the B3LYP energy calculation for (C 150 H 30 ) 2 with the cc-pVDZ basis set (4500 basis functions) was 50,499 on 98,304 cores of the K computer

Hypersonic ramjet experiment project. Phase 1: Computer program description, ramjet and scramjet cycle performance

Science.gov (United States)

Jackson, R. J.; Wang, T. T.

1974-01-01

A computer program was developed to describe the performance of ramjet and scramjet cycles. The program performs one dimensional calculations of the equilibrium, real-gas internal flow properties of the engine. The program can be used for the following: (1) preliminary design calculation and (2) design analysis of internal flow properties corresponding to stipulated flow areas. Only the combustion of hydrogen in air is considered in this case.

An interdepartmental Ph.D. program in computational biology and bioinformatics: the Yale perspective.

Science.gov (United States)

Gerstein, Mark; Greenbaum, Dov; Cheung, Kei; Miller, Perry L

2007-02-01

Computational biology and bioinformatics (CBB), the terms often used interchangeably, represent a rapidly evolving biological discipline. With the clear potential for discovery and innovation, and the need to deal with the deluge of biological data, many academic institutions are committing significant resources to develop CBB research and training programs. Yale formally established an interdepartmental Ph.D. program in CBB in May 2003. This paper describes Yale's program, discussing the scope of the field, the program's goals and curriculum, as well as a number of issues that arose in implementing the program. (Further updated information is available from the program's website, www.cbb.yale.edu.)

INSPECT: a package of computer programs for planning and evaluating safeguards inspections

International Nuclear Information System (INIS)

Mullen, M.F.

1980-01-01

As part of the US Program of Technical Assistance to IAEA Safeguards, PNL has developed a package of computer programs, called INSPECT, that can be used in planning and evaluating safeguards inspections of various types of nuclear facilities. The programs are based on the statistical methods described in Part F of the IAEA Safeguards Technical Manual and can be used to calculate the variance components of the MUF (Material Unaccounted For) statistic, the variance components of the D (difference) statistic, attribute and variables sampling plans, and a measure of the effectiveness of the inspection plan. The paper describes the programs, reviews a number of applications, and indicates areas for future work

Method for Statically Checking an Object-oriented Computer Program Module

Science.gov (United States)

Bierhoff, Kevin M. (Inventor); Aldrich, Jonathan (Inventor)

2012-01-01

A method for statically checking an object-oriented computer program module includes the step of identifying objects within a computer program module, at least one of the objects having a plurality of references thereto, possibly from multiple clients. A discipline of permissions is imposed on the objects identified within the computer program module. The permissions enable tracking, from among a discrete set of changeable states, a subset of states each object might be in. A determination is made regarding whether the imposed permissions are violated by a potential reference to any of the identified objects. The results of the determination are output to a user.

Emotion Oriented Programming: Computational Abstractions for AI Problem Solving

OpenAIRE

Darty , Kevin; Sabouret , Nicolas

2012-01-01

International audience; In this paper, we present a programming paradigm for AI problem solving based on computational concepts drawn from Affective Computing. It is believed that emotions participate in human adaptability and reactivity, in behaviour selection and in complex and dynamic environments. We propose to define a mechanism inspired from this observation for general AI problem solving. To this purpose, we synthesize emotions as programming abstractions that represent the perception ...

N286.7-99, A Canadian standard specifying software quality management system requirements for analytical, scientific, and design computer programs and its implementation at AECL

International Nuclear Information System (INIS)

Abel, R.

2000-01-01

Analytical, scientific, and design computer programs (referred to in this paper as 'scientific computer programs') are developed for use in a large number of ways by the user-engineer to support and prove engineering calculations and assumptions. These computer programs are subject to frequent modifications inherent in their application and are often used for critical calculations and analysis relative to safety and functionality of equipment and systems. N286.7-99(4) was developed to establish appropriate quality management system requirements to deal with the development, modification, and application of scientific computer programs. N286.7-99 provides particular guidance regarding the treatment of legacy codes

Development of computer code in PNC, 8

International Nuclear Information System (INIS)

Ohhira, Mitsuru

1990-01-01

Private buildings applied base isolation system, are on the practical stage now. So, under Construction and Maintenance Management Office, we are doing an application study of base isolation system to nuclear fuel facilities. On the process of this study, we have developed Dynamic Analysis Program-Base Isolation System (DAP-BS) which is able to run a 32-bit personal computer. Using this program, we can analyze a 3-dimensional structure, and evaluate the various properties of base isolation parts that are divided into maximum 16 blocks. And from the results of some simulation analyses, we thought that DAP-BS had good reliability and marketability. So, we put DAP-BS on the market. (author)

Computer program for the automated attendance accounting system

Science.gov (United States)

Poulson, P.; Rasmusson, C.

1971-01-01

The automated attendance accounting system (AAAS) was developed under the auspices of the Space Technology Applications Program. The task is basically the adaptation of a small digital computer, coupled with specially developed pushbutton terminals located in school classrooms and offices for the purpose of taking daily attendance, maintaining complete attendance records, and producing partial and summary reports. Especially developed for high schools, the system is intended to relieve both teachers and office personnel from the time-consuming and dreary task of recording and analyzing the myriad classroom attendance data collected throughout the semester. In addition, since many school district budgets are related to student attendance, the increase in accounting accuracy is expected to augment district income. A major component of this system is the real-time AAAS software system, which is described.

Computer Programming Games and Gender Oriented Cultural Forms

Science.gov (United States)

AlSulaiman, Sarah Abdulmalik

I present the design and evaluation of two games designed to help elementary and middle school students learn computer programming concepts. The first game was designed to be "gender neutral", aligning with might be described as a consensus opinion on best practices for computational learning environments. The second game, based on the cultural form of dress up dolls was deliberately designed to appeal to females. I recruited 70 participants in an international two-phase study to investigate the relationship between games, gender, attitudes towards computer programming, and learning. My findings suggest that while the two games were equally effective in terms of learning outcomes, I saw differences in motivation between players of the two games. Specifically, participants who reported a preference for female- oriented games were more motivated to learn about computer programming when they played a game that they perceived as designed for females. In addition, I describe how the two games seemed to encourage different types of social activity between players in a classroom setting. Based on these results, I reflect on the strategy of exclusively designing games and activities as "gender neutral", and suggest that employing cultural forms, including gendered ones, may help create a more productive experience for learners.

Development of C++ Application Program for Solving Quadratic Equation in Elementary School in Nigeria

Science.gov (United States)

Bandele, Samuel Oye; Adekunle, Adeyemi Suraju

2015-01-01

The study was conducted to design, develop and test a c++ application program CAP-QUAD for solving quadratic equation in elementary school in Nigeria. The package was developed in c++ using object-oriented programming language, other computer program that were also utilized during the development process is DevC++ compiler, it was used for…

Low-Budget Computer Programming in Your School (An Alternative to the Cost of Large Computers). Illinois Series on Educational Applications of Computers. No. 14.

Science.gov (United States)

Dennis, J. Richard; Thomson, David

This paper is concerned with a low cost alternative for providing computer experience to secondary school students. The brief discussion covers the programmable calculator and its relevance for teaching the concepts and the rudiments of computer programming and for computer problem solving. A list of twenty-five programming activities related to…

An Analysis on Distance Education Computer Programming Students' Attitudes Regarding Programming and Their Self-Efficacy for Programming

Science.gov (United States)

Ozyurt, Ozcan

2015-01-01

This study aims to analyze the attitudes of students studying computer programming through the distance education regarding programming, and their self-efficacy for programming and the relation between these two factors. The study is conducted with 104 students being thought with distance education in a university in the north region of Turkey in…

Mathematica: A System of Computer Programs

OpenAIRE

Maiti, Santanu K.

2006-01-01

Starting from the basic level of mathematica here we illustrate how to use a mathematica notebook and write a program in the notebook. Next, we investigate elaborately the way of linking of external programs with mathematica, so-called the mathlink operation. Using this technique we can run very tedious jobs quite efficiently, and the operations become extremely fast. Sometimes it is quite desirable to run jobs in background of a computer which can take considerable amount of time to finish, ...

Preliminary evaluation of the BIODOSE computer program

International Nuclear Information System (INIS)

Bonner, N.A.; Ng, Y.C.

1979-09-01

The BIODOSE computer program simulates the environmental transport of radionuclides released to surface water and predicts the dosage to humans. We have evaluated the program for its suitability to the needs of the Nuclear Regulatory Commission Waste Management Program. In particular, it is an evaluation to determine whether BIODOSE models account for the significant pathways and mechanisms resulting in radiological doses to man. In general, BIODOSE is a satisfactory code for converting radionuclide releases to the aqueous environment into doses to man

Interactive computer programs for applied nutrition education.

Science.gov (United States)

Wise, A

1985-12-01

DIET2 and DIET3 are programs written for a Dec2050 computer and intended for teaching applied nutrition to students of nutrition, dietetics, home economics, and hotel and institutional administration. DIET2 combines all the facilities of the separate dietary programs already available at Robert Gordon's Institute of Technology into a single package, and extends these to give students a large amount of relevant information about the nutritional balance of foods (including DHSS and NACNE recommendations) prior to choosing them for meals. Students are also helped by the inclusion of typical portion weights. They are presented with an analysis of nutrients and their balance in the menu created, with an easy mechanism for ammendation of the menu and addition of foods which provide the nutrients that are lacking. At any stage the computer can give the proportion of total nutrient provided by each meal. DIET3 is a relatively simple program that displays the nutritional profile of foods and diets semigraphically.

Seventy Years of Computing in the Nuclear Weapons Program

Energy Technology Data Exchange (ETDEWEB)

Archer, Billy Joe [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-05-30

Los Alamos has continuously been on the forefront of scientific computing since it helped found the field. This talk will explore the rich history of computing in the Los Alamos weapons program. The current status of computing will be discussed, as will the expectations for the near future.

Interactive, Computer-Based Training Program for Radiological Workers

International Nuclear Information System (INIS)

Trinoskey, P.A.; Camacho, P.I.; Wells, L.

2000-01-01

Lawrence Livermore National Laboratory (LLNL) is redesigning its Computer-Based Training (CBT) program for radiological workers. The redesign represents a major effort to produce a single, highly interactive and flexible CBT program that will meet the training needs of a wide range of radiological workers--from researchers and x-ray operators to individuals working in tritium, uranium, plutonium, and accelerator facilities. The new CBT program addresses the broad diversity of backgrounds found at a national laboratory. When a training audience is homogeneous in terms of education level and type of work performed, it is difficult to duplicate the effectiveness of a flexible, technically competent instructor who can tailor a course to the express needs and concerns of a course's participants. Unfortunately, such homogeneity is rare. At LLNL, they have a diverse workforce engaged in a wide range of radiological activities, from the fairly common to the quite exotic. As a result, the Laboratory must offer a wide variety of radiological worker courses. These include a general contamination-control course in addition to radioactive-material-handling courses for both low-level laboratory (i.e., bench-top) activities as well as high-level work in tritium, uranium, and plutonium facilities. They also offer training courses for employees who work with radiation-generating devices--x-ray, accelerator, and E-beam operators, for instance. However, even with the number and variety of courses the Laboratory offers, they are constrained by the diversity of backgrounds (i.e., knowledge and experience) of those to be trained. Moreover, time constraints often preclude in-depth coverage of site- and/or task-specific details. In response to this situation, several years ago LLNL began moving toward computer-based training for radiological workers. Today, that CBT effort includes a general radiological safety course developed by the Department of Energy's Hanford facility and a

Development of a computer-based pulsed NMR thermometer

International Nuclear Information System (INIS)

Hobeika, Alexandre; Haard, T.M.; Hoskinson, E.M.; Packard, R.E.

2003-01-01

We have designed a fully computer-controlled pulsed NMR system, using the National Instruments PCI-6115 data acquisition board. We use it for millikelvin thermometry and have developed a special control program, written in LabVIEW, for this purpose. It can perform measurements of temperature via the susceptibility or the τ 1 dependence. This system requires little hardware, which makes it very versatile, easily reproducible and customizable

Computer science teacher professional development in the United States: a review of studies published between 2004 and 2014

Science.gov (United States)

Menekse, Muhsin

2015-10-01

While there has been a remarkable interest to make computer science a core K-12 academic subject in the United States, there is a shortage of K-12 computer science teachers to successfully implement computer sciences courses in schools. In order to enhance computer science teacher capacity, training programs have been offered through teacher professional development. In this study, the main goal was to systematically review the studies regarding computer science professional development to understand the scope, context, and effectiveness of these programs in the past decade (2004-2014). Based on 21 journal articles and conference proceedings, this study explored: (1) Type of professional development organization and source of funding, (2) professional development structure and participants, (3) goal of professional development and type of evaluation used, (4) specific computer science concepts and training tools used, (5) and their effectiveness to improve teacher practice and student learning.

High Performance Computing Modernization Program Kerberos Throughput Test Report

Science.gov (United States)

2017-10-26

Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/5524--17-9751 High Performance Computing Modernization Program Kerberos Throughput Test ...NUMBER 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 2. REPORT TYPE1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND SUBTITLE 6. AUTHOR(S) 8. PERFORMING...PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT High Performance Computing Modernization Program Kerberos Throughput Test Report Daniel G. Gdula* and

Methods for the development of large computer codes under LTSS

International Nuclear Information System (INIS)

Sicilian, J.M.

1977-06-01

TRAC is a large computer code being developed by Group Q-6 for the analysis of the transient thermal hydraulic behavior of light-water nuclear reactors. A system designed to assist the development of TRAC is described. The system consists of a central HYDRA dataset, R6LIB, containing files used in the development of TRAC, and a file maintenance program, HORSE, which facilitates the use of this dataset

Penerapan Aplikasi Program Penjualan Dan Pembelian Menggunakan Model Rapid Application Development

Directory of Open Access Journals (Sweden)

Annisa Febriani

2017-09-01

Abstract The development of information technology at the moment quickly and rapidly, supported by one means namely computer. Of course the computer has been equipped with a particular application is used to help facilitate the work of the man to manage the data of an organization or company so that getting accurate results and according to needs. The results of the observations that have been made, showed a sales and purchase activities are still using manual systems, one of them at a clothing store. Starting from the data processing of the goods, the difficulty of checking stock, purchase transaction, sales transactions, as well as other data storage associated with all types of such activities, so that it could make a loss for the store owner, errors in the logging and less akuratnya the report is made. Judging from the large number of transactions done on clothing stores, required system information more quickly and accurately. Thus, the author makes the program architecture-based computer, use the Microsoft Visual Basic.net programming language and the MySQL database, so that the information and activities that occur can be done quickly and accurately. The methods used in making architecture the program using the model of Rapid Application Development (RAD. This RAD model is an adaptation of the waterfall model for high speed version of the development of each component of its software. Results achieved from the discussion of this theme is the form of the application program selling and buying the ready-made. In this case, the use of the application program is the best solution to solve the existing problems, as well as with the use of application programs can be reached by an activity which is effective and efficient in supporting that activity, especially for addressing the problem of the sale and purchase of.   Keywords: Sales Program, Purchasing Program.

Designing Educational Games for Computer Programming: A Holistic Framework

Science.gov (United States)

Malliarakis, Christos; Satratzemi, Maya; Xinogalos, Stelios

2014-01-01

Computer science is continuously evolving during the past decades. This has also brought forth new knowledge that should be incorporated and new learning strategies must be adopted for the successful teaching of all sub-domains. For example, computer programming is a vital knowledge area within computer science with constantly changing curriculum…

DITTY - a computer program for calculating population dose integrated over ten thousand years

International Nuclear Information System (INIS)

Napier, B.A.; Peloquin, R.A.; Strenge, D.L.

1986-03-01

The computer program DITTY (Dose Integrated Over Ten Thousand Years) was developed to determine the collective dose from long term nuclear waste disposal sites resulting from the ground-water pathways. DITTY estimates the time integral of collective dose over a ten-thousand-year period for time-variant radionuclide releases to surface waters, wells, or the atmosphere. This document includes the following information on DITTY: a description of the mathematical models, program designs, data file requirements, input preparation, output interpretations, sample problems, and program-generated diagnostic messages

FIT: Computer Program that Interactively Determines Polynomial Equations for Data which are a Function of Two Independent Variables

Science.gov (United States)

Arbuckle, P. D.; Sliwa, S. M.; Roy, M. L.; Tiffany, S. H.

1985-01-01

A computer program for interactively developing least-squares polynomial equations to fit user-supplied data is described. The program is characterized by the ability to compute the polynomial equations of a surface fit through data that are a function of two independent variables. The program utilizes the Langley Research Center graphics packages to display polynomial equation curves and data points, facilitating a qualitative evaluation of the effectiveness of the fit. An explanation of the fundamental principles and features of the program, as well as sample input and corresponding output, are included.

BALANCER: A Computer Program for Balancing Chemical Equations.

Science.gov (United States)

Jones, R. David; Schwab, A. Paul

1989-01-01

Describes the theory and operation of a computer program which was written to balance chemical equations. Software consists of a compiled file of 46K for use under MS-DOS 2.0 or later on IBM PC or compatible computers. Additional specifications of courseware and availability information are included. (Author/RT)

Computational chemistry with transputers: A direct SCF program

International Nuclear Information System (INIS)

Wedig, U.; Burkhardt, A.; Schnering, H.G. von

1989-01-01

By using transputers it is possible to build up networks of parallel processors with varying topology. Due to the architecture of the processors it is appropriate to use the MIMD (multiple instruction multiple data) concept of parallel computing. The most suitable programming language is OCCAM. We investigate the use of transputer networks in computational chemistry, starting with the direct SCF method. The most time consuming step, the calculation of the two electron integrals is executed parallelly. Each node in the network calculates whole batches of integrals. The main program is written in OCCAM. For some large-scale arithmetic processes running on a single node, however, we used FORTRAN subroutines out of standard ab-initio programs to reduce the programming effort. Test calculations show, that the integral calculation step can be parallelled very efficiently. We observed a speed-up of almost 8 using eight network processors. Even in consideration of the scalar part of the SCF iteration, the speed-up is not less than 7.1. (orig.)

A directory of computer programs for assessment of radioactive waste disposal in geological formations

International Nuclear Information System (INIS)

Broyd, T.W.; Dean, R.B.; Hobbs, G.D.; Knowles, N.C.; Putney, J.M.; Wrigley, J.

1984-01-01

This Directory describes computer programs suitable for the assessment of radioactive waste disposal facilities in geological formations. The programs, which are mainly applicable to the post closure analysis of the repository, address combinations of the following topics: nuclide inventory, corrosion, leaching, geochemistry, stress analysis, heat transfer, groundwater flow and radionuclide transport. Biosphere modelling, surface water flow and risk analysis are not covered. A total of 248 programs are identified, of which 50 are reviewed in detail, 134 in summary and 64 in tabular fashion. The directory has been compiled using a combination of literature searches, telephone and postal correspondence and meetings with recognised experts in the respective areas of work covered. It differs from previous reviews of computer programs for similar topics areas in two main respects. Firstly, the method of obtaining information has resulted in program descriptions of considerable breadth and detail. Secondly, the Directory has concentrated wherever possible on European codes, whereas most previous work of this nature has looked solely at programs developed in North America. The reviews are presented in good faith, but it has not been possible to run any of the programs on a computer, and so truly objective comparisons may not be made. Finally, although the Directory is specific to the post-closure assessment of a repository site, some of the programs described could also be used in other areas of repository analysis (eg repository design)