Undergraduate and graduate petroleum engineering education in the U.S

International Nuclear Information System (INIS)

Von Gonten, W.D.; Whiting, R.L.

1992-01-01

Petroleum Engineering educational programs produce graduates primarily for the upstream sector of the petroleum industry. This paper presents a summary of both the undergraduate and graduate petroleum engineering programs in the United States. The undergraduate portion of the paper will address the curriculum, accreditation, enrollments, student recruitment, faculty, jobs, starting salaries, and a historical perspective. The graduate section will address both master and doctoral level programs including the number and size of programs, curriculum, admission requirements, program administration, jobs, salaries, and a historical perspective

Supply of science and engineering graduates for the United States nuclear industry

International Nuclear Information System (INIS)

Baker, J.G.; Blair, L.M.

1993-01-01

The concern in the USA about the adequacy of supply of new graduate scientists and engineers to meet technical employment needs, is particularly acute within the nuclear field because of declines in the number of education programs and number of students in nuclear engineering, health physics, and radiochemistry. The decline in the number of new graduates is assessed in comparison to current and projected future employment needs. Currently, supplies of new graduates are just meeting employment needs in nuclear engineering and are less than adequate in health physics and radiochemistry. If the number of graduates does not increase these inadequacies of supply are likely become more severe in the future. 5 figs

A Study to Determine the Basic Science and Mathematics Topics Most Needed by Engineering Technology Graduates of Wake Technical Institute in Performing Job Duties.

Science.gov (United States)

Edwards, Timothy I.; Roberson, Clarence E., Jr.

A survey of 470 graduates of the six engineering technology programs at Wake Technical Institute--Architectural, Chemical, Civil Engineering, Computer, Electronic Engineering, and Industrial Engineering Technologies--and 227 of their employers was conducted in October, 1979, to determine the science and mathematics topics most needed by…

Assessment of computer-related health problems among post-graduate nursing students.

Science.gov (United States)

Khan, Shaheen Akhtar; Sharma, Veena

2013-01-01

The study was conducted to assess computer-related health problems among post-graduate nursing students and to develop a Self Instructional Module for prevention of computer-related health problems in a selected university situated in Delhi. A descriptive survey with co-relational design was adopted. A total of 97 samples were selected from different faculties of Jamia Hamdard by multi stage sampling with systematic random sampling technique. Among post-graduate students, majority of sample subjects had average compliance with computer-related ergonomics principles. As regards computer related health problems, majority of post graduate students had moderate computer-related health problems, Self Instructional Module developed for prevention of computer-related health problems was found to be acceptable by the post-graduate students.

Developing Curriculum of Nuclear Civil Engineering Degree Programme at Graduate Level

International Nuclear Information System (INIS)

Iqbal, J.

2016-01-01

Full text: The paper suggests the introduction of a new degree, namely nuclear civil engineering at graduate level for better utilization of civil engineers in nuclear power plant (NPP) design and construction. At present, both nuclear engineering and civil engineering degrees are offered at undergraduate and graduate levels in numerous renowned universities of the world. However, when a civil engineer, even after completion of nuclear engineering at postgraduate level, undertakes an assignment related to NPP design, he comes across various problems which are not covered in the present curricula. For instance, NPPs’ siting issues, design of pre-stressed concrete containment against loads of loss of coolant accident (LOCA), various impulsive and impactive loads (e.g., detonations, aircraft crash analysis, etc.) and shielding calculations are some of the core issues during nuclear power plant design. The paper highlights the importance of introduction of nuclear civil engineering degree at the graduate level. Besides, the contents of the proposed course work have also been discussed. Keeping in view the fact that, currently, no such degree is offered in any university of the world, the paper explores useful avenues to human resource development for introducing and expanding nuclear power programmes. (author

Voices from the United Arab Emirates: Engineering Graduates' Labour Market Requisite Competencies

Science.gov (United States)

EL-Sakran, Tharwat M.; Awad, Asmaa

2012-01-01

This study reports on engineering graduates' labour market requisite communication competences and skills in the work environment in the United Arab Emirates (UAE). Its main purpose was to investigate whether internationally required engineering graduates' communication competences were the same in third world countries or different. It used a…

Development of American and Foreign-National Female Graduate Students in Engineering at Research Universities

Science.gov (United States)

Morrison, Briana Marie Keafer

2013-01-01

Women continue to be underrepresented among engineering faculty despite decades of reform and intervention. To understand why more graduate women do not pursue careers in academia, this mixed methods study focuses on the experiences of women currently in graduate engineering programs, and how the graduate culture shapes their development and…

2007 Plant Metabolic Engineering Gordon Conference and Graduate Research Seminar

Energy Technology Data Exchange (ETDEWEB)

Erich Grotewold

2008-09-15

Plant Metabolic Engineering is an emerging field that integrates a diverse range of disciplines including plant genetics, genomics, biochemistry, chemistry and cell biology. The Gordon-Kenan Graduate Research Seminar (GRS) in Plant Metabolic Engineering was initiated to provide a unique opportunity for future researcher leaders to present their work in this field. It also creates an environment allowing for peer-review and critical assessment of work without the intimidation usually associated with the presence of senior investigators. The GRS immediately precedes the Plant Metabolic Engineering Gordon Research Conference and will be for and by graduate students and post-docs, with the assistance of the organizers listed.

A Tale of Two Majors: Explaining the Gender Gap in STEM Employment among Computer Science and Engineering Degree Holders

Directory of Open Access Journals (Sweden)

Sharon Sassler

2017-07-01

Full Text Available We examine factors contributing to the gender gap in employment in science, technology, engineering, and math (STEM among men and women with bachelor’s degrees in computer science and engineering, the two largest and most male-dominated STEM fields. Data come from the National Science Foundation’s (NSF Scientists and Engineers Statistical Data System (SESTAT from 1995 to 2008. Different factors are associated with persistence in STEM jobs among computer science and engineering degree holders. Conditional on receiving a degree in computer science, women are 14 percentage points less likely to work in STEM than their male counterparts. Controlling for demographic and family characteristics did little to change this gender gap. Women with degrees in engineering are approximately 8 percentage points less likely to work in STEM than men, although about half of this gap is explained by observed differences between men and women. We document a widening gender gap in STEM employment in computer science, but this gender gap narrows across college cohorts among those with degrees in engineering. Among recent computer science graduates, the gender gap in STEM employment for white, Hispanic, and black women relative to white men is even larger than for older graduates. Gender and race gaps in STEM employment for recent cohorts of engineering graduates are generally small, though younger Asian women and men no longer have an employment advantage relative to white men. Our results suggest that a one-size-fits-all approach to increasing women’s representation in the most male-dominated STEM fields may not work.

Multidisciplinary Graduate Education in Bioprocess Engineering

Energy Technology Data Exchange (ETDEWEB)

Mark A. Eiteman

2006-04-18

This report describes the accomplishments of the University of Georgia in establishing an academic program geared toward the emerging biobased products industry. By virtue of its strengths and structure, the University of Georgia is particularly well-suited for developing a program focused on plant- and microbial-based bioproducts, and it was in this general area that this program was developed. The program had several unique characteristics. First, we implemented a distinguished lecture series that brought outstanding scientists and engineers to our University to interact with students and share their vision of the biobased economy. Second, we offered industrially-oriented and multidisciplinary courses that provided students with a broad background on various facets of biobased business and technology. Third, we provided the students with opportunities to expand beyond the classroom by engaging in research lab rotations and industrial internships. Fourth, each student was engaged in a creative research project as led by a multidisciplinary faculty team. Throughout the implementation of these activities, we maintained a student-centered, mentoring approach to education. The most tangible outcome of this project was the graduation of two students who participated in a variety of scholarly activities, culminating in research toward the completion of a thesis and dissertation. Both research projects involved the use of microorganisms to produce industrial products from agricultural substrates via fermentation processes. The research advanced our understanding of microorganisms as used for industrial processes and products, as described in several articles published in scholarly journals and presentations made at scientific conferences (see information on pp. 14-15). Another outcome is one graduate course, Fermentation Engineering Laboratory, which is a unique experiential and multidisciplinary course. This course will be offered in the future as an elective to

Computer Engineers.

Science.gov (United States)

Moncarz, Roger

2000-01-01

Looks at computer engineers and describes their job, employment outlook, earnings, and training and qualifications. Provides a list of resources related to computer engineering careers and the computer industry. (JOW)

Engineering Graduates' Skill Sets in the MENA Region: A Gap Analysis of Industry Expectations and Satisfaction

Science.gov (United States)

Ramadi, Eric; Ramadi, Serge; Nasr, Karim

2016-01-01

This study explored gaps between industry expectations and perceptions of engineering graduates' skill sets in the Middle East and North Africa (MENA) region. This study measured the importance that managers of engineers placed on 36 skills relevant to engineers. Also measured was managers' satisfaction with engineering graduates' skill sets.…

English Education for Engineers in the World of Globalization : A Report of an Undergraduate and Graduate English Program with an Emphasis on Writing

Science.gov (United States)

Shimazu, Nobuko

In an increasingly globalized world, demand for engineers well versed in English remains strong. As a professor of English in the Faculty of Computer Science and Systems Engineering at the Kyushu Institute of Technology, I have sought with the aid of two associate professors to improve the English program for our engineering students together to help meet that very demand. In order to assist other English teachers in similar situations to improve their own English programs, I would like to report on the ideas and methods presently used in our undergraduate English program, specifically the first-year compulsory and common course with its emphasis on paragraph writing which students from each of the five departments within the Faculty of Computer Science and Systems Engineering are required to take. In addition, I would also like to report my ideas and teaching methods for a graduate research paper writing course. The objective of this course is to teach graduate students how to write presentations for conferences and papers for journals at the international level.

Cross-cultural analysis of the verbal conflict behavior of the graduate mining engineers

Directory of Open Access Journals (Sweden)

Pevneva Inna

2017-01-01

Full Text Available The article is devoted to the crucial issue of the interpersonal communication skills of engineering graduates and studies the verbal behavior of the graduates majoring in mining engineering in conflict professional communication considered in a cross-cultural aspect. The research is based on the needs that future mining engineers have for conducting successful communication, work in teams and run an effective discourse both verbally and in writing. Verbal communication involves a strategic process by which a speaker defines the language resources for its implementation. By choosing a strategy which should contribute to the goals and objectives of the interaction a speaker makes the process of communication either successful or leading to a communicative failure. The scientific importance of this work is in multidiscipline approach and cross-cultural study of ethnic and cultural influences, gender and other characteristics of the verbal behavior of Russian and American engineering graduates.

A brief history of graduate distance education in nuclear engineering at Penn State Univ

International Nuclear Information System (INIS)

Hochreiter, L. E.; Zimmerman, D. L.; Brenizer Jr, J. S.; Stark, M. A.

2006-01-01

The Pennsylvania State University Nuclear Engineering Distance Education Program has a twenty year history of providing graduate level distance education in Nuclear Engineering. The Distance Education Program was initiated as a specific program which was developed for the Westinghouse Energy Systems Divisions in Pittsburgh. In 1983, Carnegie-Mellon University (CMU) decided to terminate its small Nuclear Engineering Program. Up until that time, Westinghouse employees could enroll at CMU for graduate classes in Nuclear Engineering as well as other engineering disciplines and could obtain a masters degree or if desired, could continue for a Ph.D. degree. (authors)

Evaluation in STEM Online Graduate Degree Programs in Agricultural Sciences and Engineering

Science.gov (United States)

Downs, Holly A.

2014-01-01

Demands for online graduate degrees have increased pressure on universities to launch web degrees quickly and, at times, without attending to their quality. Scarce research exists identifying what evaluation activities are being done by science, technology, engineering, and mathematics (STEM) online graduate degree programs that are accustomed to…

A Quality Management Evaluation of the Graduate Education Process for Ocean Engineers in the Civil Engineer Corps

Science.gov (United States)

1993-12-01

graduate education required for Ocean Facilities Program (OFP) officers in the Civil Engineer Corps (CEC) of the United States Navy. For the purpose...determined by distributing questionnaires to all officers in the OFP. Statistical analyses of numerical data and judgmental3 analysis of professional...45 B. Ocean Facility Program Officer Graduate Education Questionnaire ....... 47 C. Summary of Questionnaire Responses

Computational engineering

CERN Document Server

2014-01-01

The book presents state-of-the-art works in computational engineering. Focus is on mathematical modeling, numerical simulation, experimental validation and visualization in engineering sciences. In particular, the following topics are presented: constitutive models and their implementation into finite element codes, numerical models in nonlinear elasto-dynamics including seismic excitations, multiphase models in structural engineering and multiscale models of materials systems, sensitivity and reliability analysis of engineering structures, the application of scientific computing in urban water management and hydraulic engineering, and the application of genetic algorithms for the registration of laser scanner point clouds.

Analyzing the competences of production engineering graduates: an industry perspective

Directory of Open Access Journals (Sweden)

Patrícia Fernanda dos Santos

2017-11-01

Full Text Available Abstract This paper aims at conducting an analysis the competences of production engineering graduates, building on an industry view. To this end, we conducted a survey addressing 103 medium and large companies within the Brazilian manufacturing industry. The results suggest that companies do recognize the importance of competences. Some gaps in the competences of graduates were also pointed out by respondents. This study suggests the need for the development of efforts for providing the production engineer with a better professional background. The links between university and industry are likely to contribute towards such direction, notably as a starting point for institutions and industries to foster their student’s competences, aiming their aptitude for an ever-competitive job market, which values the flexible, creative being, who is capable of creating innovative solutions.

I'm Graduating This Year! So What IS an Engineer Anyway? Research Brief

Science.gov (United States)

Matusovich, Holly; Streveler, Ruth; Miller, Ron; Olds, Barbara

2009-01-01

It is often assumed that graduating engineering students readily envision what it means to be an engineer and what type of work they will be doing as engineers in the future. How can one know if this is true? This research begins to answer these questions by aiming to understand undergraduate engineering students' perceptions of themselves as…

Computer aided system engineering for space construction

Science.gov (United States)

Racheli, Ugo

1989-01-01

This viewgraph presentation covers the following topics. Construction activities envisioned for the assembly of large platforms in space (as well as interplanetary spacecraft and bases on extraterrestrial surfaces) require computational tools that exceed the capability of conventional construction management programs. The Center for Space Construction is investigating the requirements for new computational tools and, at the same time, suggesting the expansion of graduate and undergraduate curricula to include proficiency in Computer Aided Engineering (CAE) though design courses and individual or team projects in advanced space systems design. In the center's research, special emphasis is placed on problems of constructability and of the interruptability of planned activity sequences to be carried out by crews operating under hostile environmental conditions. The departure point for the planned work is the acquisition of the MCAE I-DEAS software, developed by the Structural Dynamics Research Corporation (SDRC), and its expansion to the level of capability denoted by the acronym IDEAS**2 currently used for configuration maintenance on Space Station Freedom. In addition to improving proficiency in the use of I-DEAS and IDEAS**2, it is contemplated that new software modules will be developed to expand the architecture of IDEAS**2. Such modules will deal with those analyses that require the integration of a space platform's configuration with a breakdown of planned construction activities and with a failure modes analysis to support computer aided system engineering (CASE) applied to space construction.

Graduate nuclear engineering programmes motivate educational and research activities

International Nuclear Information System (INIS)

Mavko, B.

2000-01-01

Some fifteen years ago the University of Ljubljana, Faculty for Mathematics and Physics together with the national research organisation the J. Stefan jointly established a Graduate programme of Nuclear Engineering. From the onset, the programme focused on nuclear technology, nuclear safety, and reactor physics and environment protection. Over the years this graduate programme has became the focal point of nuclear related, research and educational activities in Slovenia. It has grown into a meeting ground for recognised national and distinguished foreign educators and experienced professionals from the industry. In conjunction with an important national project, supported by the Slovenian government, entitled 'Jung Researcher' it also enhances the knowledge transfer to the next generation. Since the programme was introduced, the interest for this programme has been steadily growing. Accordingly, a number of PhD and MS degrees in NE have been awarded. The graduates of this programme have encountered very good job opportunities in nuclear as well as in non-nuclear sector. (author)

Beyond the first "click:" Women graduate students in computer science

Science.gov (United States)

Sader, Jennifer L.

This dissertation explored the ways that constructions of gender shaped the choices and expectations of women doctoral students in computer science. Women who do graduate work in computer science still operate in an environment where they are in the minority. How much of women's underrepresentation in computer science fields results from a problem of imagining women as computer scientists? As long as women in these fields are seen as exceptions, they are exceptions that prove the "rule" that computing is a man's domain. The following questions were the focus of this inquiry: What are the career aspirations of women doctoral students in computer science? How do they feel about their chances to succeed in their chosen career and field? How do women doctoral students in computer science construct womanhood? What are their constructions of what it means to be a computer scientist? In what ways, if any, do they believe their gender has affected their experience in their graduate programs? The goal was to examine how constructions of computer science and of gender---including participants' own understanding of what it meant to be a woman, as well as the messages they received from their environment---contributed to their success as graduate students in a field where women are still greatly outnumbered by men. Ten women from four different institutions of higher education were recruited to participate in this study. These women varied in demographic characteristics like age, race, and ethnicity. Still, there were many common threads in their experiences. For example, their construction of womanhood did not limit their career prospects to traditionally female jobs. They had grown up with the expectation that they would be able to succeed in whatever field they chose. Most also had very positive constructions of programming as something that was "fun," rewarding, and intellectually stimulating. Their biggest obstacles were feelings of isolation and a resulting loss of

Computational modeling, optimization and manufacturing simulation of advanced engineering materials

CERN Document Server

2016-01-01

This volume presents recent research work focused in the development of adequate theoretical and numerical formulations to describe the behavior of advanced engineering materials.  Particular emphasis is devoted to applications in the fields of biological tissues, phase changing and porous materials, polymers and to micro/nano scale modeling. Sensitivity analysis, gradient and non-gradient based optimization procedures are involved in many of the chapters, aiming at the solution of constitutive inverse problems and parameter identification. All these relevant topics are exposed by experienced international and inter institutional research teams resulting in a high level compilation. The book is a valuable research reference for scientists, senior undergraduate and graduate students, as well as for engineers acting in the area of computational material modeling.

Creating Communication Training Programs for Graduate Students in Science and Engineering

Science.gov (United States)

Rice, M.; Lewenstein, B.; Weiss, M.

2012-12-01

Scientists and engineers in all disciplines are required to communicate with colleagues, the media, policy-makers, and/or the general public. However, most STEM graduate programs do not equip students with the skills needed to communicate effectively to these diverse audiences. In this presentation, we describe a science communication course developed by and for graduate students at Cornell University. This training, which has been implemented as a semester-long seminar and a weekend-long workshop, covers popular science writing, science policy, print and web media, radio and television. Here we present a comparison of learning outcomes for the semester and weekend formats, a summary of lessons learned, and tools for developing similar science communication programs for graduate students at other institutions.

Assessment by Employers of Newly Graduated Civil Engineers from the Islamic University of Gaza

Science.gov (United States)

Enshassi, Adnan; Hassouna, Ahmed

2005-01-01

The evaluation process is very important to identify and recognize the strengths and the weaknesses of graduated students. The purpose of this paper is to evaluate the performance of the newly graduated civil engineers from the Islamic University of Gaza in Palestine. The methodology was based on questionnaires and informal interview. The…

Chinese engineering students' cross-cultural adaptation in graduate school

Science.gov (United States)

Jiang, Xinquan

This study explores cross-cultural adaptation experience of Chinese engineering students in the U.S. I interact with 10 Chinese doctoral students in engineering from a public research university through in-depth interviews to describe (1) their perceptions of and responses to key challenges they encountered in graduate school, (2) their perspectives on the challenges that stem from cross-cultural differences, and (3) their conceptualization of cross-cultural adaptation in the context of graduate school. My findings reveal that the major challenges participants encounter during graduate school are academic issues related to cultural differences and difficulties of crossing cultural boundaries and integrating into the university community. These challenges include finding motivation for doctoral study, becoming an independent learner, building a close relationship with faculty, interacting and forming relationships with American people, and gaining social recognition and support. The engineering students in this study believe they are less successful in their social integration than they are in accomplishing academic goals, mainly because of their preoccupation with academics, language barriers and cultural differences. The presence of a large Chinese student community on campus has provided a sense of community and social support for these students, but it also contributes to diminishing their willingness and opportunities to interact with people of different cultural backgrounds. Depending on their needs and purposes, they have different insights into the meaning of cross-cultural adaptation and therefore, and choose different paths to establish themselves in a new environment. Overall, they agree that cross-cultural adaptation involves a process of re-establishing themselves in new academic, social, and cultural communities, and adaptation is necessary for their personal and professional advancement in the U.S. They also acknowledge that encountering and adjusting

Computer graphics in engineering education

CERN Document Server

Rogers, David F

2013-01-01

Computer Graphics in Engineering Education discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) as an instructional material in engineering education. Each of the nine chapters of this book covers topics and cites examples that are relevant to the relationship of CAD-CAM with engineering education. The first chapter discusses the use of computer graphics in the U.S. Naval Academy, while Chapter 2 covers key issues in instructional computer graphics. This book then discusses low-cost computer graphics in engineering education. Chapter 4 discusses the uniform b

The Fu Foundation School of Engineering & Applied Science - Columbia

Science.gov (United States)

Engineering Mechanics Computer Science Earth and Environmental Engineering Electrical Engineering Industrial Engineering & Applied Science - Columbia University Admissions Undergraduates Graduates Distance Learning Physics and Applied Mathematics Biomedical Engineering Chemical Engineering Civil Engineering and

The Civil Engineering Graduate Program at PUC-Rio: A Brazilian Experience.

Science.gov (United States)

Romanel, Celso; Filho, Jose Napoleao

This document discusses the graduate programs in civil engineering at the Pontifical Catholic University of Rio de Janeiro, Brazil, the oldest Brazilian private university. The report features discussions of faculty member backgrounds, trends in student enrollment, women's participation in the program, degree completion, student origins,…

Integrating Global Hydrology Into Graduate Engineering Education and Research

Science.gov (United States)

Griffis, V. W.

2007-12-01

Worldwide, polluted water affects the health of 1.2 billion people and contributes to the death of 15 million children under five every year. In addition poor environmental quality contributes to 25 per cent of all preventable ill health in the world. To address some of these problems, at the 2002 World Summit on Sustainable Development, the world community set the goal of halving, by the year 2015, the proportion of people without access to safe drinking water and basic sanitation. Solving sanitation and water resource management problems in any part of the world presents an interdisciplinary, complex challenge. However, when we attempt to solve these problems in an international context, our technical approaches must be tempered with cultural sensitivity and extraordinary management strategies. To meet this challenge, Michigan Tech has developed a unique global partnership with the U.S. Peace Corps to address our acknowledgement of the importance of placing engineering solutions in a global context. The program has graduated 30 students. Program enrollment is now over 30 and over 20 countries have hosted our students. The objective of this presentation is to demonstrate how this unique partnership can be integrated with graduate engineering education and research and also show how such a program may attract a more diverse student population into engineering. All graduate students enrolled in our Master's International Program in Civil and Environmental Engineering must complete specific coursework requirements before departing for their international experience. In CE5993 (Field Engineering in the Developing World) students learn to apply concepts of sustainable development and appropriate technology in the developing world. In FW5770 (Rural Community Development Planning and Analysis) students learn how one involves a community in the decision making process. A common theme in both courses is the role of woman in successful development projects. Technical

Mobile Learning According to Students of Computer Engineering and Computer Education: A Comparison of Attitudes

Directory of Open Access Journals (Sweden)

Deniz Mertkan GEZGIN

2018-01-01

Full Text Available Mobile learning has started to perform an increasingly significant role in improving learning outcomes in education. Successful and efficient implementation of m-learning in higher education, as with all educational levels, depends on users’ acceptance of this technology. This study focuses on investigating the attitudes of undergraduate students of Computer Engineering (CENG and Computer Education and Instructional Technology (CEIT departments in a Turkish public university towards m-learning from three perspectives; gender, area of study, and mobile device ownership. Using a correlational survey method, a Mobile Learning Attitude Scale (MLAS was administered to 531 students, analysis of which revealed a positive attitude to m-learning in general. A further investigation of the aforementioned three variables showed a more positive attitude for female students in terms of usability, for CEIT students in terms of advantages, usability and independence, and for those owning a mobile device in terms of usability. An important implication from the findings, among others, is supplementing Computer Engineering curriculum with elective courses on the fundamentals of mobile learning, and/or the design and development of m-learning software, so as to create, in the long run, more specialized and complementary teams comprised of trained CENG and CEIT graduates in m-learning sector.

Influence of High School Vocational Agriculture on the Matriculation, Graduation, and Employment of Agricultural Engineering Graduates from the Iowa State University of Science and Technology.

Science.gov (United States)

Ahrens, Donald Louis

To determine the influence of high school vocational agriculture on college achievement and subsequent employment of agricultural engineering majors, data were collected from 419 graduates of Iowa State University representing the period from 1942 to 1964. The 112 graduates who had taken at least 3 or more semesters of high school vocational…

Promoting convergence: The integrated graduate program in physical and engineering biology at Yale University, a new model for graduate education.

Science.gov (United States)

Noble, Dorottya B; Mochrie, Simon G J; O'Hern, Corey S; Pollard, Thomas D; Regan, Lynne

2016-11-12

In 2008, we established the Integrated Graduate Program in Physical and Engineering Biology (IGPPEB) at Yale University. Our goal was to create a comprehensive graduate program to train a new generation of scientists who possess a sophisticated understanding of biology and who are capable of applying physical and quantitative methodologies to solve biological problems. Here we describe the framework of the training program, report on its effectiveness, and also share the insights we gained during its development and implementation. The program features co-teaching by faculty with complementary specializations, student peer learning, and novel hands-on courses that facilitate the seamless blending of interdisciplinary research and teaching. It also incorporates enrichment activities to improve communication skills, engage students in science outreach, and foster a cohesive program cohort, all of which promote the development of transferable skills applicable in a variety of careers. The curriculum of the graduate program is integrated with the curricular requirements of several Ph.D.-granting home programs in the physical, engineering, and biological sciences. Moreover, the wide-ranging recruiting activities of the IGPPEB serve to enhance the quality and diversity of students entering graduate school at Yale. We also discuss some of the challenges we encountered in establishing and optimizing the program, and describe the institution-level changes that were catalyzed by the introduction of the new graduate program. The goal of this article is to serve as both an inspiration and as a practical "how to" manual for those who seek to establish similar programs at their own institutions. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(6):537-549, 2016. © 2016 The Authors Biochemistry and Molecular Biology Education published by Wiley Periodicals, Inc. on behalf of International Union of Biochemistry and Molecular Biology.

Supporting "The Best and Brightest" in Science and Engineering: NSF Graduate Research Fellowships

OpenAIRE

Richard B. Freeman; Tanwin Chang; Hanley Chiang

2005-01-01

The National Science Foundation's (NSF) Graduate Research Fellowship (GRF) is a highly prestigious award for science and engineering (S&E) graduate students. This paper uses data from 1952 to 2004 on the population of over 200,000 applicants to the GRF to examine the determinants of the number and characteristics of applicants and the characteristics of awardees. In the early years of the program, GRF awards went largely to physical science and mathematics students and disproportionately to w...

Status of University of Cincinnati reactor-site nuclear engineering graduate programs

International Nuclear Information System (INIS)

Anno, J.N.; Christenson, J.M.; Eckart, L.E.

1993-01-01

The University of Cincinnati (UC) nuclear engineering program faculty has now had 12 yr of experience in delivering reactor-site educational programs to nuclear power plant technical personnel. Currently, with the sponsorship of the Toledo-Edison Company (TED), we are conducting a multiyear on-site graduate program with more than 30 participants at the Davis-Besse nuclear power plant. The program enables TED employees with the proper academic background to earn a master of science (MS) degree in nuclear engineering (mechanical engineering option). This paper presents a brief history of tile evolution of UC reactor-site educational programs together with a description of the progress of the current program

Expectations of Competency: The Mismatch between Employers' and Graduates' Views of End-User Computing Skills Requirements in the Workplace

Science.gov (United States)

Gibbs, Shirley; Steel, Gary; Kuiper, Alison

2011-01-01

The use of computers has become part of everyday life. The high prevalence of computer use appears to lead employers to assume that university graduates will have the good computing skills necessary in many graduate level jobs. This study investigates how well the expectations of employers match the perceptions of near-graduate students about the…

Improving student retention in computer engineering technology

Science.gov (United States)

Pierozinski, Russell Ivan

The purpose of this research project was to improve student retention in the Computer Engineering Technology program at the Northern Alberta Institute of Technology by reducing the number of dropouts and increasing the graduation rate. This action research project utilized a mixed methods approach of a survey and face-to-face interviews. The participants were male and female, with a large majority ranging from 18 to 21 years of age. The research found that participants recognized their skills and capability, but their capacity to remain in the program was dependent on understanding and meeting the demanding pace and rigour of the program. The participants recognized that curriculum delivery along with instructor-student interaction had an impact on student retention. To be successful in the program, students required support in four domains: academic, learning management, career, and social.

Computer Science in High School Graduation Requirements. ECS Education Trends (Updated)

Science.gov (United States)

Zinth, Jennifer

2016-01-01

Allowing high school students to fulfill a math or science high school graduation requirement via a computer science credit may encourage more student to pursue computer science coursework. This Education Trends report is an update to the original report released in April 2015 and explores state policies that allow or require districts to apply…

Incorporating electronic-based and computer-based strategies: graduate nursing courses in administration.

Science.gov (United States)

Graveley, E; Fullerton, J T

1998-04-01

The use of electronic technology allows faculty to improve their course offerings. Four graduate courses in nursing administration were contemporized to incorporate fundamental computer-based skills that would be expected of graduates in the work setting. Principles of adult learning offered a philosophical foundation that guided course development and revision. Course delivery strategies included computer-assisted instructional modules, e-mail interactive discussion groups, and use of the electronic classroom. Classroom seminar discussions and two-way interactive video conferencing focused on group resolution of problems derived from employment settings and assigned readings. Using these electronic technologies, a variety of courses can be revised to accommodate the learners' needs.

Migration of Computer Science Graduates from South Asia to Europe and North America

Science.gov (United States)

Khan, W. A.; Siddiqi, A. B.; Ahmed, F.

2006-01-01

This paper addresses the influx of computer science graduates from South Asia into Europe and North America. It analyses the need and supply chains between two points and identifies the pros and cons of the education imparted to these graduates. The effects of social disorder due to migrations are addressed. The resulting technological vacuum in…

Influencing the job market by the quality of graduates--a biomedical engineering example.

Science.gov (United States)

Augustyniak, Ewa; Augustyniak, Piotr

2015-01-01

Academic teaching of a new discipline, besides its contents and formal issues, requires participation of the university in development of a target job market. This was the case of biomedical engineering in Poland ten years ago. This paper presents examples of activities, taken up by our university in cooperation with prospective employers, and evaluated with a help of our first alumni. The evaluation survey shows that despite the immature job market, the number of graduates employed accordingly to their education systematically raises each year from 72,5% in 2011 to 93,8% in 2013. Another interesting result is the distribution of job searching period: 19.2% of graduates were already employed before the graduation, further 23.1% found their job in less than one month after the diploma examination and another 28.8% in less than three months. The paper also highlights the role the former graduates play in motivating teachers and students to efforts towards a better educational outcome.

From computer to brain foundations of computational neuroscience

CERN Document Server

Lytton, William W

2002-01-01

Biology undergraduates, medical students and life-science graduate students often have limited mathematical skills. Similarly, physics, math and engineering students have little patience for the detailed facts that make up much of biological knowledge. Teaching computational neuroscience as an integrated discipline requires that both groups be brought forward onto common ground. This book does this by making ancillary material available in an appendix and providing basic explanations without becoming bogged down in unnecessary details. The book will be suitable for undergraduates and beginning graduate students taking a computational neuroscience course and also to anyone with an interest in the uses of the computer in modeling the nervous system.

Engineering Manpower Bulletin, Number 16.

Science.gov (United States)

Engineers Joint Council, New York, NY. Engineering Manpower Commission.

This bulletin presents the highlights of an evaluation of today's engineering graduates as seen by the managers of engineering, manufacturing and technical marketing in a major electrical equipment manufacturing company. Today's engineer is seen as far more productive than his predecessor. The computer has greatly expanded his productive capacity.…

Recruitment and Workplace Integration of Men and Women Engineers in France: The Case of EPF Ecole D'ingénieurs Graduates

Science.gov (United States)

Stevanovic, Biljana

2014-01-01

Based on "First Job" surveys conducted six months after graduation among graduates from 2000 to 2007 and semi-structured interviews, this paper examines the recruitment and workplace integration of women and men graduates from EPF Ecole d'Ingenieurs. The study's findings show that women engineering graduates from EPF generally have more…

Establishing the Research Agenda for Increasing the Representation of Women in Engineering and Computing.

Science.gov (United States)

Buse, Kathleen; Hill, Catherine; Benson, Kathleen

2017-01-01

While there is an extensive body of research on gender equity in engineering and computing, there have been few efforts to glean insight from a dialog among experts. To encourage collaboration and to develop a shared vision of the future research agenda, a 2 day workshop of 50 scholars who work on the topic of gender in engineering and computing was held at a rural conference center. The structure of the conference and the location allowed for time to reflect, dialog, and to craft an innovative research agenda aimed at increasing the representation of women in engineering and computing. This paper has been written by the conference organizers and details the ideas and recommendations from the scholars. The result is an innovative, collaborative approach to future research that focuses on identifying effective interventions. The new approach includes the creation of partnerships with stakeholders including businesses, government agencies, non-profits and academic institutions to allow a broader voice in setting research priorities. Researchers recommend incorporating multiple disciplines and methodologies, while expanding the use of data analytics, merging and mining existing databases and creating new datasets. The future research agenda is detailed and includes studies focused on socio-cultural interventions particularly on career choice, within undergraduate and graduate programs, and for women in professional careers. The outcome is a vision for future research that can be shared with researchers, practitioners and other stakeholders that will lead to gender equity in the engineering and computing professions.

Computational problems in engineering

CERN Document Server

Mladenov, Valeri

2014-01-01

This book provides readers with modern computational techniques for solving variety of problems from electrical, mechanical, civil and chemical engineering. Mathematical methods are presented in a unified manner, so they can be applied consistently to problems in applied electromagnetics, strength of materials, fluid mechanics, heat and mass transfer, environmental engineering, biomedical engineering, signal processing, automatic control and more.   • Features contributions from distinguished researchers on significant aspects of current numerical methods and computational mathematics; • Presents actual results and innovative methods that provide numerical solutions, while minimizing computing times; • Includes new and advanced methods and modern variations of known techniques that can solve difficult scientific problems efficiently.  

Computational Intelligence for Engineering Systems

CERN Document Server

Madureira, A; Vale, Zita

2011-01-01

"Computational Intelligence for Engineering Systems" provides an overview and original analysis of new developments and advances in several areas of computational intelligence. Computational Intelligence have become the road-map for engineers to develop and analyze novel techniques to solve problems in basic sciences (such as physics, chemistry and biology) and engineering, environmental, life and social sciences. The contributions are written by international experts, who provide up-to-date aspects of the topics discussed and present recent, original insights into their own experien

Gendered Transitions, Career Identities and Possible Selves: The Case of Engineering Graduates

Science.gov (United States)

Papafilippou, Vanda; Bentley, Laura

2017-01-01

This article, drawing upon the Paired Peers project, a longitudinal qualitative study (n = 90), examines how seven UK engineering graduates, four women and three men, construct their career identities during the transitionary period from university to work. It explores how gender and the occupational cultures that reside within the sector, and the…

Advances in Computer Science and Engineering

CERN Document Server

Second International Conference on Advances in Computer Science and Engineering (CES 2012)

2012-01-01

This book includes the proceedings of the second International Conference on Advances in Computer Science and Engineering (CES 2012), which was held during January 13-14, 2012 in Sanya, China. The papers in these proceedings of CES 2012 focus on the researchers’ advanced works in their fields of Computer Science and Engineering mainly organized in four topics, (1) Software Engineering, (2) Intelligent Computing, (3) Computer Networks, and (4) Artificial Intelligence Software.

A Multicultural, Multidisciplinary Short Course to Introduce Recently Graduated Engineers to the Global Nature of Professional Practice

Science.gov (United States)

Hazelton, Pam; Malone, Molly; Gardner, Anne

2009-01-01

Since 2001, the International Institute of Women in Engineering (IIWE) at EPF, Ecole d'ingenieurs generaliste, Sceaux, France, has conducted a 3 week short course for culturally and discipline diverse, recently graduated and final year engineering students. The aim of this course is to introduce young engineers to broad global concepts and issues…

Howard University Engineers Success: Interdisciplinary Study Keeps Howard on the Cutting Edge

Science.gov (United States)

Chew, Cassie M.

2004-01-01

According to Engineering Workforce Commission annual reports, in 1999 Howard University graduated 108 students, 92 of whom were African American, in its chemical, civil, electrical, and mechanical engineering programs and computer science programs. After two more years of graduating approximately 100 students across programs, in 2002, according to…

Approaches to the embedding of sustainability into the engineering curriculum - where are we now, and how do our graduates become global engineers?

OpenAIRE

Steiner, Simon; Penlington, Roger

2010-01-01

This paper presents a resume of how the topic of sustainability can become fully-integrated into the engineering curriculum in the UK, and how this needs to evolve toward consideration of how graduates could be better developed as global engineers. The paper begins by providing a justification as to why sustainability is an important feature of the already overcrowded engineering curriculum, and briefly reports, through illustrative examples, on alternative approaches which currently embed su...

Computational methods in earthquake engineering

CERN Document Server

Plevris, Vagelis; Lagaros, Nikos

2017-01-01

This is the third book in a series on Computational Methods in Earthquake Engineering. The purpose of this volume is to bring together the scientific communities of Computational Mechanics and Structural Dynamics, offering a wide coverage of timely issues on contemporary Earthquake Engineering. This volume will facilitate the exchange of ideas in topics of mutual interest and can serve as a platform for establishing links between research groups with complementary activities. The computational aspects are emphasized in order to address difficult engineering problems of great social and economic importance. .

Computer games and software engineering

CERN Document Server

Cooper, Kendra M L

2015-01-01

Computer games represent a significant software application domain for innovative research in software engineering techniques and technologies. Game developers, whether focusing on entertainment-market opportunities or game-based applications in non-entertainment domains, thus share a common interest with software engineers and developers on how to best engineer game software.Featuring contributions from leading experts in software engineering, the book provides a comprehensive introduction to computer game software development that includes its history as well as emerging research on the inte

Engineering applications of soft computing

CERN Document Server

Díaz-Cortés, Margarita-Arimatea; Rojas, Raúl

2017-01-01

This book bridges the gap between Soft Computing techniques and their applications to complex engineering problems. In each chapter we endeavor to explain the basic ideas behind the proposed applications in an accessible format for readers who may not possess a background in some of the fields. Therefore, engineers or practitioners who are not familiar with Soft Computing methods will appreciate that the techniques discussed go beyond simple theoretical tools, since they have been adapted to solve significant problems that commonly arise in such areas. At the same time, the book will show members of the Soft Computing community how engineering problems are now being solved and handled with the help of intelligent approaches. Highlighting new applications and implementations of Soft Computing approaches in various engineering contexts, the book is divided into 12 chapters. Further, it has been structured so that each chapter can be read independently of the others.

Computer Labs | College of Engineering & Applied Science

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Structural Engineering Laboratory Water Resources Laboratory Computer Science Department Computer Science Academic Programs Computer Science Undergraduate Programs Computer Science Major Computer Science Tracks

Computer Resources | College of Engineering & Applied Science

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Structural Engineering Laboratory Water Resources Laboratory Computer Science Department Computer Science Academic Programs Computer Science Undergraduate Programs Computer Science Major Computer Science Tracks

Computer Science | Classification | College of Engineering & Applied

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Structural Engineering Laboratory Water Resources Laboratory Computer Science Department Computer Science Academic Programs Computer Science Undergraduate Programs Computer Science Major Computer Science Tracks

Computation: A New Open Access Journal of Computational Chemistry, Computational Biology and Computational Engineering

OpenAIRE

Karlheinz Schwarz; Rainer Breitling; Christian Allen

2013-01-01

Computation (ISSN 2079-3197; http://www.mdpi.com/journal/computation) is an international scientific open access journal focusing on fundamental work in the field of computational science and engineering. Computational science has become essential in many research areas by contributing to solving complex problems in fundamental science all the way to engineering. The very broad range of application domains suggests structuring this journal into three sections, which are briefly characterized ...

What Do I Need to Succeed: The Case of Arab Engineering Graduate Students' Self-Perceptions of Writing

Science.gov (United States)

Hellmann, Katherine

2013-01-01

Through a sociocultural lens, this study examines five Saudi Arabian engineering graduate students' valuation of English writing, their self-perceptions of writing, what promoted the development of those self-perceptions and how their self-perceptions compare with engineering industry writing standards. The data collected for this qualitative case…

Instant Google Compute Engine

CERN Document Server

Papaspyrou, Alexander

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. This book is a step-by-step guide to installing and using Google Compute Engine.""Instant Google Compute Engine"" is great for developers and operators who are new to Cloud computing, and who are looking to get a good grounding in using Infrastructure-as-a-Service as part of their daily work. It's assumed that you will have some experience with the Linux operating system as well as familiarity with the concept of virtualization technologies, suc

Employability of the Bachelor of Science in Electronics Engineering Graduates of Camarines Sur Polytechnic Colleges

Directory of Open Access Journals (Sweden)

Rizza T. Loquias

2015-11-01

Full Text Available The study determined the employment status of the graduates of BS Electronics Engineering from 1999 to 2011. It also addressed the relevance of the ECE program outcomes and school factors to their employability. Pertinent data were gathered using a questionnaire and the sample size of 180 was determined using Slovin’s formula. Findings revealed that the graduates are highly employable in a wide range of industry such as electronics manufacturing, electronics design, telecommunications, broadcasting, and data communications and ICT-related areas, were able to pass the licensure examinations and other certifications, currently enjoying regular permanent job positions as supervisors, production engineers, process engineers, educators and others, and are working for companies located in Metro Manila and industrial zones in Laguna and Cavite. A significant number work abroad as OFWs. Only a small number are employed in the province of Camarines Sur mainly due to the lack of electronics industries and employment opportunities in the area. The skills the graduates found most useful to their first jobs are critical thinking, problem solving, and communication skills. Suggestions were given such as the inclusion of industry-utilized software and enhancement of the OJT program, more hands-on activities in the curriculum, exposure to industry while studying, and job familiarization among others. The findings of the study can serve as basis for curriculum review and revision to meet the demands of the industry.

U.S. Engineering Degrees for Improving South Indian Graduate Students' Marriage and Dowry Options

Science.gov (United States)

Yakaboski, Tamara; Sheridan, Robyn Stout; Dade, Kristin

2014-01-01

The article examines improved marriage opportunities as an unexplored motivator for pursuing international education via U.S. graduate engineering degrees and stresses the need to centralize gender in analyzing academic mobility and international education. This interdisciplinary qualitative study explores how South Indian men and women's…

Development of Graduate Course Education by Industry Collaboration in Center for Engineering Education Development, CEED

Science.gov (United States)

Noguchi, Toru; Yoshikawa, Kozo; Nakamura, Masato; Kaneko, Katsuhiko

New education programs for engineering graduate courses, and the achievements are described. Following the previous reports on overseas and domestic internship2) , 3) , this article states other common programs ; seminars on state of technologies in industries, practical English and internationalization programs, and a program to accept overseas internship students. E-learning system to assist off-campus students is also described. All these programs are developed and conducted by specialist professors invited from industries and national institutions, in collaboration with faculty professors. Students learn how the engineering science apply to the practical problems, acquire wider view and deeper understanding on industries, and gain abilities to act in global society including communication skill, those are not taught in classrooms and laboratories. Educational effects of these industry collaborated programs is significant to activate the graduate course education, although the comprehensive evaluation is the future subject.

Managing reality shock: Expectations versus experiences of graduate engineers

Directory of Open Access Journals (Sweden)

Sarah Riordan

2007-10-01

Full Text Available The objective of the study is an analysis of the relationship between the work expectations and experiences of graduate engineers during their early career period. It reports on discrepancies in graduates’ expectations of the world of work and the reality of the early career stage. Conclusions include recommendations of how "reality shock" can be managed better by both organisations and individuals. Qualitative data were obtained through in-depth interviews with sixteen participants with less than five years work experience, employed in a large utility organisation in the Western Cape. Results indicate that participants experience significant incongruence between their expectations of work and work experiences.

Analysis of nuclear and radiological events. Textbook for lecture in graduate school of engineering in the University of Tokyo

International Nuclear Information System (INIS)

Watanabe, Norio

2007-02-01

The Japan Atomic Energy Agency is carrying out the cooperative activity by providing specialized educational and training staff and making our facilities available for the graduate school of engineering in The University of Tokyo as part of developing human resources in nuclear technology. This report is prepared as a textbook for the lecture in the graduate school of engineering in The University of Tokyo and provides the outlines of activities on the analysis of nuclear and radiological events and analysis methods as well as the summaries of major incidents and accidents that occurred. (author)

Advances in Computer Science, Engineering & Applications : Proceedings of the Second International Conference on Computer Science, Engineering & Applications

CERN Document Server

Zizka, Jan; Nagamalai, Dhinaharan

2012-01-01

The International conference series on Computer Science, Engineering & Applications (ICCSEA) aims to bring together researchers and practitioners from academia and industry to focus on understanding computer science, engineering and applications and to establish new collaborations in these areas. The Second International Conference on Computer Science, Engineering & Applications (ICCSEA-2012), held in Delhi, India, during May 25-27, 2012 attracted many local and international delegates, presenting a balanced mixture of  intellect and research both from the East and from the West. Upon a strenuous peer-review process the best submissions were selected leading to an exciting, rich and a high quality technical conference program, which featured high-impact presentations in the latest developments of various areas of computer science, engineering and applications research.

Advances in Computer Science, Engineering & Applications : Proceedings of the Second International Conference on Computer Science, Engineering & Applications

CERN Document Server

Zizka, Jan; Nagamalai, Dhinaharan

2012-01-01

The International conference series on Computer Science, Engineering & Applications (ICCSEA) aims to bring together researchers and practitioners from academia and industry to focus on understanding computer science, engineering and applications and to establish new collaborations in these areas. The Second International Conference on Computer Science, Engineering & Applications (ICCSEA-2012), held in Delhi, India, during May 25-27, 2012 attracted many local and international delegates, presenting a balanced mixture of  intellect and research both from the East and from the West. Upon a strenuous peer-review process the best submissions were selected leading to an exciting, rich and a high quality technical conference program, which featured high-impact presentations in the latest developments of various areas of computer science, engineering and applications research.  

Computer aided training in nuclear power engineering at the Gdansk Technical University

International Nuclear Information System (INIS)

Marecki, J.; Duzinkiewicz, K.; Kosmowski, K.T.

1993-01-01

The Faculty of Electrical Engineering of the Gdansk Technical University has organized post-graduate studies in nuclear power engineering in cooperation with the Institute of Nuclear Research at Swierk since 1973. Post-graduate courses in nuclear power plant construction and design were organized twice. Between 1986 and 1990, prototype software was developed for aiding lectures, self-teaching and knowledge testing in the following fields: 1) dynamics and control of nuclear reactors; 2) simulators of nuclear power plant basic systems (reactor, steam generator, steam turbine, and synchronous generator). (Z.S.) 2 refs

Learning to Become Graduate Students: Japanese Women's Experience in the Research Unit in Engineering

Science.gov (United States)

Hosaka, Masako

2010-01-01

Based on the analysis of 16 interviews with women first-year master's students at two national engineering schools in Japan, this article examines the socialisation role of compulsory undergraduate research experience in Japanese women's decisions to pursue graduate education and choices of the programme. The findings suggest that research…

Obstacles of Search Engines Used by Graduate Students at The Faculty of Education, The Islamic University in Gaza

Directory of Open Access Journals (Sweden)

Fayez Kamal Shaladan

2018-03-01

Full Text Available This study aimed to identify obstacles of search engines used by graduate students at the Faculty of Education, the Islamic University in Gaza, and to overcome them. The researchers utilized the analytical descriptive approach to achieve the goal of the study. They used the interview tool and designed a questionnaire to collect data for the study. The sample of the study was (164 male and female postgraduate students enrolled in the College of Education. The study results were as follows: The degree of obstacles to the use of search engines among postgraduate students at the Faculty of Education at the Islamic University in Gaza was high with a percentage of (%71.05.There were no statistically significant differences between the averages of the study sample for the obstacles of the use of the search engines among the postgraduate students in the Faculty of Education, the Islamic University due to the gender and academic variables, the cumulative average. An exception to this was the third theme which was personal constraints which had differences in favor of students whose cumulative rates were less than (%85. The study concluded with these recommendations: The university should subscribe to various search engines revise admission terms and conditions for postgraduate studies whereby English and computer courses can be included. Keywords: Search engines, Students, Postgraduate studies, Islamic University.

Computer aided plant engineering: An analysis and suggestions for computer use

International Nuclear Information System (INIS)

Leinemann, K.

1979-09-01

To get indications to and boundary conditions for computer use in plant engineering, an analysis of the engineering process was done. The structure of plant engineering is represented by a network of substaks and subsets of data which are to be manipulated. Main tool for integration of CAD-subsystems in plant engineering should be a central database which is described by characteristical requirements and a possible simple conceptual schema. The main features of an interactive system for computer aided plant engineering are shortly illustrated by two examples. The analysis leads to the conclusion, that an interactive graphic system for manipulation of net-like structured data, usable for various subtasks, should be the base for computer aided plant engineering. (orig.) [de

Computational Modeling in Tissue Engineering

CERN Document Server

2013-01-01

One of the major challenges in tissue engineering is the translation of biological knowledge on complex cell and tissue behavior into a predictive and robust engineering process. Mastering this complexity is an essential step towards clinical applications of tissue engineering. This volume discusses computational modeling tools that allow studying the biological complexity in a more quantitative way. More specifically, computational tools can help in:  (i) quantifying and optimizing the tissue engineering product, e.g. by adapting scaffold design to optimize micro-environmental signals or by adapting selection criteria to improve homogeneity of the selected cell population; (ii) quantifying and optimizing the tissue engineering process, e.g. by adapting bioreactor design to improve quality and quantity of the final product; and (iii) assessing the influence of the in vivo environment on the behavior of the tissue engineering product, e.g. by investigating vascular ingrowth. The book presents examples of each...

An Investigation of an Open-Source Software Development Environment in a Software Engineering Graduate Course

Science.gov (United States)

Ge, Xun; Huang, Kun; Dong, Yifei

2010-01-01

A semester-long ethnography study was carried out to investigate project-based learning in a graduate software engineering course through the implementation of an Open-Source Software Development (OSSD) learning environment, which featured authentic projects, learning community, cognitive apprenticeship, and technology affordances. The study…

Computer-aided engineering in High Energy Physics

International Nuclear Information System (INIS)

Bachy, G.; Hauviller, C.; Messerli, R.; Mottier, M.

1988-01-01

Computing, standard tool for a long time in the High Energy Physics community, is being slowly introduced at CERN in the mechanical engineering field. The first major application was structural analysis followed by Computer-Aided Design (CAD). Development work is now progressing towards Computer-Aided Engineering around a powerful data base. This paper gives examples of the power of this approach applied to engineering for accelerators and detectors

Computational error and complexity in science and engineering computational error and complexity

CERN Document Server

Lakshmikantham, Vangipuram; Chui, Charles K; Chui, Charles K

2005-01-01

The book "Computational Error and Complexity in Science and Engineering” pervades all the science and engineering disciplines where computation occurs. Scientific and engineering computation happens to be the interface between the mathematical model/problem and the real world application. One needs to obtain good quality numerical values for any real-world implementation. Just mathematical quantities symbols are of no use to engineers/technologists. Computational complexity of the numerical method to solve the mathematical model, also computed along with the solution, on the other hand, will tell us how much computation/computational effort has been spent to achieve that quality of result. Anyone who wants the specified physical problem to be solved has every right to know the quality of the solution as well as the resources spent for the solution. The computed error as well as the complexity provide the scientific convincing answer to these questions. Specifically some of the disciplines in which the book w...

Engineering computations at the national magnetic fusion energy computer center

International Nuclear Information System (INIS)

Murty, S.

1983-01-01

The National Magnetic Fusion Energy Computer Center (NMFECC) was established by the U.S. Department of Energy's Division of Magnetic Fusion Energy (MFE). The NMFECC headquarters is located at Lawrence Livermore National Laboratory. Its purpose is to apply large-scale computational technology and computing techniques to the problems of controlled thermonuclear research. In addition to providing cost effective computing services, the NMFECC also maintains a large collection of computer codes in mathematics, physics, and engineering that is shared by the entire MFE research community. This review provides a broad perspective of the NMFECC, and a list of available codes at the NMFECC for engineering computations is given

Where have all the graduates gone?

Science.gov (United States)

1999-03-01

Key facts and figures about the labour market for new graduates in the UK were published recently in the IES Annual Graduate Review 1998-99, which indicates that the demand for graduates amongst the traditional recruiters has continued to grow steadily, along with reports of recruitment difficulties. It is noteworthy that last year one in three graduates went into fixed-term or temporary appointments, while many of those who took up permanent jobs went into lower level work that did not make use of their graduate skills. Many graduates are taking more than a year, and sometimes up to three years, to find their way into permanent jobs and careers. Those graduating in computer science, engineering and mathematics, medicine and related subjects, or education have been the most likely to gain high level managerial, professional or technical jobs and have the lowest unemployment rates. In contrast, those with biological science, humanities, social sciences or creative arts degrees are most likely to be unemployed initially. Many new graduates commenced their jobs by earning salaries in the range £10 000-15 000, but they should of course continue to earn more than those lesser qualified, as well as having lower unemployment rates. Of the 400 000 students who graduated in 1998 (more than double the total of a decade ago), over half had first degrees and the rest undergraduate or postgraduate qualifications. Despite the growth, entry to the physical sciences, engineering and technology has been falling, as has the proportion on sandwich courses. Women now comprise the majority of entrants to first degrees but remain under-represented in mathematics, physical science and engineering or technology courses. Interestingly more than one in three students now has a paid job during their course; such work experience can be beneficial to their long-term job searches. In the longer term, numbers of graduates are expected to stay broadly constant over the next three years

2013 International Conference on Computer Engineering and Network

CERN Document Server

Zhu, Tingshao

2014-01-01

This book aims to examine innovation in the fields of computer engineering and networking. The book covers important emerging topics in computer engineering and networking, and it will help researchers and engineers improve their knowledge of state-of-art in related areas. The book presents papers from The Proceedings of the 2013 International Conference on Computer Engineering and Network (CENet2013) which was held on July 20-21, in Shanghai, China.

Computational structural mechanics for engine structures

Science.gov (United States)

Chamis, C. C.

1989-01-01

The computational structural mechanics (CSM) program at Lewis encompasses: (1) fundamental aspects for formulating and solving structural mechanics problems, and (2) development of integrated software systems to computationally simulate the performance/durability/life of engine structures. It is structured to mainly supplement, complement, and whenever possible replace, costly experimental efforts which are unavoidable during engineering research and development programs. Specific objectives include: investigate unique advantages of parallel and multiprocesses for: reformulating/solving structural mechanics and formulating/solving multidisciplinary mechanics and develop integrated structural system computational simulators for: predicting structural performances, evaluating newly developed methods, and for identifying and prioritizing improved/missing methods needed. Herein the CSM program is summarized with emphasis on the Engine Structures Computational Simulator (ESCS). Typical results obtained using ESCS are described to illustrate its versatility.

Computer systems and software engineering

Science.gov (United States)

Mckay, Charles W.

1988-01-01

The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

Computer Forensics for Graduate Accountants: A Motivational Curriculum Design Approach

Directory of Open Access Journals (Sweden)

Grover Kearns

2010-06-01

Full Text Available Computer forensics involves the investigation of digital sources to acquire evidence that can be used in a court of law. It can also be used to identify and respond to threats to hosts and systems. Accountants use computer forensics to investigate computer crime or misuse, theft of trade secrets, theft of or destruction of intellectual property, and fraud. Education of accountants to use forensic tools is a goal of the AICPA (American Institute of Certified Public Accountants. Accounting students, however, may not view information technology as vital to their career paths and need motivation to acquire forensic knowledge and skills. This paper presents a curriculum design methodology for teaching graduate accounting students computer forensics. The methodology is tested using perceptions of the students about the success of the methodology and their acquisition of forensics knowledge and skills. An important component of the pedagogical approach is the use of an annotated list of over 50 forensic web-based tools.

1st International Conference on Communication and Computer Engineering

CERN Document Server

Othman, Mohd; Othman, Mohd; Rahim, Yahaya; Pee, Naim

2015-01-01

This book covers diverse aspects of advanced computer and communication engineering, focusing specifically on industrial and manufacturing theory and applications of electronics, communications, computing, and information technology. Experts in research, industry, and academia present the latest developments in technology, describe applications involving cutting-edge communication and computer systems, and explore likely future directions. In addition, access is offered to numerous new algorithms that assist in solving computer and communication engineering problems. The book is based on presentations delivered at ICOCOE 2014, the 1st International Conference on Communication and Computer Engineering. It will appeal to a wide range of professionals in the field, including telecommunication engineers, computer engineers and scientists, researchers, academics, and students.

2nd International Conference on Communication and Computer Engineering

CERN Document Server

Othman, Mohd; Othman, Mohd; Rahim, Yahaya; Pee, Naim

2016-01-01

This book covers diverse aspects of advanced computer and communication engineering, focusing specifically on industrial and manufacturing theory and applications of electronics, communications, computing and information technology. Experts in research, industry, and academia present the latest developments in technology, describe applications involving cutting-edge communication and computer systems, and explore likely future trends. In addition, a wealth of new algorithms that assist in solving computer and communication engineering problems are presented. The book is based on presentations given at ICOCOE 2015, the 2nd International Conference on Communication and Computer Engineering. It will appeal to a wide range of professionals in the field, including telecommunication engineers, computer engineers and scientists, researchers, academics and students.

Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT)

Science.gov (United States)

Consortium and Partners | Transportation Research | NREL Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) Consortium and Partners Computer-Aided Engineering for Electric -Drive Vehicle Batteries (CAEBAT) Consortium and Partners The Computer-Aided Engineering for Electric

Advances in communication systems and electrical engineering

CERN Document Server

Huang, Xu

2008-01-01

This volume contains contributions from participants in the 2007 International Multiconference of Engineers and Computer Scientists Topics covered include communications theory, communications protocols, network management, wireless networks, telecommunication, electronics, power engineering, control engineering, signal processing, and industrial applications. The book will offer the states of arts of tremendous advances in communication systems and electrical engineering and also serve as an excellent reference work for researchers and graduate students working with/on communication systems a

SIAM Conference on Computational Science and Engineering

Energy Technology Data Exchange (ETDEWEB)

None, None

2005-08-29

The Second SIAM Conference on Computational Science and Engineering was held in San Diego from February 10-12, 2003. Total conference attendance was 553. This is a 23% increase in attendance over the first conference. The focus of this conference was to draw attention to the tremendous range of major computational efforts on large problems in science and engineering, to promote the interdisciplinary culture required to meet these large-scale challenges, and to encourage the training of the next generation of computational scientists. Computational Science & Engineering (CS&E) is now widely accepted, along with theory and experiment, as a crucial third mode of scientific investigation and engineering design. Aerospace, automotive, biological, chemical, semiconductor, and other industrial sectors now rely on simulation for technical decision support. For federal agencies also, CS&E has become an essential support for decisions on resources, transportation, and defense. CS&E is, by nature, interdisciplinary. It grows out of physical applications and it depends on computer architecture, but at its heart are powerful numerical algorithms and sophisticated computer science techniques. From an applied mathematics perspective, much of CS&E has involved analysis, but the future surely includes optimization and design, especially in the presence of uncertainty. Another mathematical frontier is the assimilation of very large data sets through such techniques as adaptive multi-resolution, automated feature search, and low-dimensional parameterization. The themes of the 2003 conference included, but were not limited to: Advanced Discretization Methods; Computational Biology and Bioinformatics; Computational Chemistry and Chemical Engineering; Computational Earth and Atmospheric Sciences; Computational Electromagnetics; Computational Fluid Dynamics; Computational Medicine and Bioengineering; Computational Physics and Astrophysics; Computational Solid Mechanics and Materials; CS

4th International Conference on Computer Engineering and Networks

CERN Document Server

2015-01-01

This book aims to examine innovation in the fields of computer engineering and networking. The book covers important emerging topics in computer engineering and networking, and it will help researchers and engineers improve their knowledge of state-of-art in related areas. The book presents papers from the 4th International Conference on Computer Engineering and Networks (CENet2014) held July 19-20, 2014 in Shanghai, China.  ·       Covers emerging topics for computer engineering and networking ·       Discusses how to improve productivity by using the latest advanced technologies ·       Examines innovation in the fields of computer engineering and networking  

Innovation in engineering education through computer assisted learning and virtual university model

Science.gov (United States)

Raicu, A.; Raicu, G.

2015-11-01

The paper presents the most important aspects of innovation in Engineering Education using Computer Assisted Learning. The authors propose to increase the quality of Engineering Education programs of study at European standards. The use of computer assisted learning methodologies in all studies is becoming an important resource in Higher Education. We intend to improve the concept of e-Learning using virtual terminals, online support and assisting special training through live seminars and interactive labs to develop a virtual university model. We intend to encourage computer assisted learning and innovation as sources of competitive advantage, to permit vision and learning analysis, identifies new sources of technology and ideas. Our work is based on our university datasets collected during last fifteen years using several e-Learning systems. In Constanta Maritime University (CMU), using eLearning and Knowledge Management Services (KMS) is very important and we apply it effectively to achieve strategic objectives, such as collaboration, sharing and good practice. We have experience in this field since 2000 year using Moodle as KMS in our university. The term KMS can be associated to Open Source Software, Open Standards, Open Protocols and Open Knowledge licenses, initiatives and policies. In CMU Virtual Campus we have today over 12500 active users. Another experience of the authors is the implementation of MariTrainer Wiki educational platform based on Dokeos and DekiWiki under MARICOMP and MEP Leonardo da Vinci Project. We'll also present in this paper a case study under EU funded project POSDRU, where the authors implemented other educational platform in Technological High Schools from Romania used over 1000 teachers. Based on large datasets the study tries to improve the concept of e-Learning teaching using the revolutionary technologies. The new concept present in this paper is that the teaching and learning will be interactive and live. The new and modern

To EDF: PHOEBUS, computer-assisted engineering

International Nuclear Information System (INIS)

Lecocq, P.; Goudal, J.C.; Barache, J.M.; Feingold, D.; Cornon, P.

1986-01-01

EDF has built a modular integrated computer-assisted nuclear engineering (CAE) system called POEBUS. Since 1975, the Organization has been interested in CAE which places computer methods and technology at the disposal of the engineering department. This paper describes the changes and their effect on the techniques in use, working methods and the personnel called on to put them into operation [fr

Computers in engineering. 1988

International Nuclear Information System (INIS)

Tipnis, V.A.; Patton, E.M.

1988-01-01

These proceedings discuss the following subjects: Knowledge base systems; Computers in designing; uses of artificial intelligence; engineering optimization and expert systems of accelerators; and parallel processing in designing

Scientific Computing in Electrical Engineering

CERN Document Server

Amrhein, Wolfgang; Zulehner, Walter

2018-01-01

This collection of selected papers presented at the 11th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in St. Wolfgang, Austria, in 2016, showcases the state of the art in SCEE. The aim of the SCEE 2016 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, and to promote intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems. The focus in methodology was on model order reduction and uncertainty quantification. This extensive reference work is divided into six parts: Computational Electromagnetics, Circuit and Device Modeling and Simulation, Coupled Problems and Multi‐Scale Approaches in Space and Time, Mathematical and Computational Methods Including Uncertainty Quantification, Model Order Reduction, and Industrial Applicat...

Interdisciplinary innovations in biomedical and health informatics graduate education.

Science.gov (United States)

Demiris, G

2007-01-01

Biomedical and health informatics (BHI) is a rapidly growing domain that relies on the active collaboration with diverse disciplines and professions. Educational initiatives in BHI need to prepare students with skills and competencies that will allow them to function within and even facilitate interdisciplinary teams (IDT). This paper describes an interdisciplinary educational approach introduced into a BHI graduate curriculum that aims to prepare informatics researchers to lead IDT research. A case study of the "gerontechnology" research track is presented which highlights how the curriculum fosters collaboration with and understanding of the disciplines of Nursing, Engineering, Computer Science, and Health Administration. Gerontechnology is a new interdisciplinary field that focuses on the use of technology to support aging. Its aim is to explore innovative ways to use information technology and develop systems that support independency and increase quality of life for senior citizens. As a result of a large research group that explores "smart home" technologies and the use of information technology, we integrated this new domain into the curriculum providing a platform for computer scientists, engineers, nurses and physicians to explore challenges and opportunities with our informatics students and faculty. The interdisciplinary educational model provides an opportunity for health informatics students to acquire the skills for communication and collaboration with other disciplines. Numerous graduate and postgraduate students have already participated in this initiative. The evaluation model of this approach is presented. Interdisciplinary educational models are required for health informatics graduate education. Such models need to be innovative and reflect the needs and trends in the domains of health care and information technology.

Computer Simulation in Information and Communication Engineering

CERN Multimedia

Anton Topurov

2005-01-01

CSICE'05 Sofia, Bulgaria 20th - 22nd October, 2005 On behalf of the International Scientific Committee, we would like to invite you all to Sofia, the capital city of Bulgaria, to the International Conference in Computer Simulation in Information and Communication Engineering CSICE'05. The Conference is aimed at facilitating the exchange of experience in the field of computer simulation gained not only in traditional fields (Communications, Electronics, Physics...) but also in the areas of biomedical engineering, environment, industrial design, etc. The objective of the Conference is to bring together lectures, researchers and practitioners from different countries, working in the fields of computer simulation in information engineering, in order to exchange information and bring new contribution to this important field of engineering design and education. The Conference will bring you the latest ideas and development of the tools for computer simulation directly from their inventors. Contribution describ...

Uncertainty quantification an accelerated course with advanced applications in computational engineering

CERN Document Server

Soize, Christian

2017-01-01

This book presents the fundamental notions and advanced mathematical tools in the stochastic modeling of uncertainties and their quantification for large-scale computational models in sciences and engineering. In particular, it focuses in parametric uncertainties, and non-parametric uncertainties with applications from the structural dynamics and vibroacoustics of complex mechanical systems, from micromechanics and multiscale mechanics of heterogeneous materials. Resulting from a course developed by the author, the book begins with a description of the fundamental mathematical tools of probability and statistics that are directly useful for uncertainty quantification. It proceeds with a well carried out description of some basic and advanced methods for constructing stochastic models of uncertainties, paying particular attention to the problem of calibrating and identifying a stochastic model of uncertainty when experimental data is available. < This book is intended to be a graduate-level textbook for stu...

Early Engagement in Course-Based Research Increases Graduation Rates and Completion of Science, Engineering, and Mathematics Degrees

Science.gov (United States)

Rodenbusch, Stacia E.; Hernandez, Paul R.; Simmons, Sarah L.; Dolan, Erin L.

2016-01-01

National efforts to transform undergraduate biology education call for research experiences to be an integral component of learning for all students. Course-based undergraduate research experiences, or CUREs, have been championed for engaging students in research at a scale that is not possible through apprenticeships in faculty research laboratories. Yet there are few if any studies that examine the long-term effects of participating in CUREs on desired student outcomes, such as graduating from college and completing a science, technology, engineering, and mathematics (STEM) major. One CURE program, the Freshman Research Initiative (FRI), has engaged thousands of first-year undergraduates over the past decade. Using propensity score–matching to control for student-level differences, we tested the effect of participating in FRI on students’ probability of graduating with a STEM degree, probability of graduating within 6 yr, and grade point average (GPA) at graduation. Students who completed all three semesters of FRI were significantly more likely than their non-FRI peers to earn a STEM degree and graduate within 6 yr. FRI had no significant effect on students’ GPAs at graduation. The effects were similar for diverse students. These results provide the most robust and best-controlled evidence to date to support calls for early involvement of undergraduates in research. PMID:27252296

Fuzzy systems and soft computing in nuclear engineering

International Nuclear Information System (INIS)

Ruan, D.

2000-01-01

This book is an organized edited collection of twenty-one contributed chapters covering nuclear engineering applications of fuzzy systems, neural networks, genetic algorithms and other soft computing techniques. All chapters are either updated review or original contributions by leading researchers written exclusively for this volume. The volume highlights the advantages of applying fuzzy systems and soft computing in nuclear engineering, which can be viewed as complementary to traditional methods. As a result, fuzzy sets and soft computing provide a powerful tool for solving intricate problems pertaining in nuclear engineering. Each chapter of the book is self-contained and also indicates the future research direction on this topic of applications of fuzzy systems and soft computing in nuclear engineering. (orig.)

About | College of Engineering & Applied Science

Science.gov (United States)

; Applied Science Powerful Ideas. Proven Results. Search for: Go This site All UWM Search Site Menu Skip to Degree Completion Program Graduate Programs Master of Science Programs Concentration in Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on

Research directions in computer engineering. Report of a workshop

Energy Technology Data Exchange (ETDEWEB)

Freeman, H

1982-09-01

The results of a workshop held in November 1981 in Washington, DC, to outline research directions for computer engineering are reported upon. The purpose of the workshop was to provide guidance to government research funding agencies, as well as to universities and industry, as to the directions which computer engineering research should take for the next five to ten years. A select group of computer engineers was assembled, drawn from all over the United States and with expertise in virtually every aspect of today's computer technology. Industrial organisations and universities were represented in roughly equal numbers. The panel proceeded to provide a sharper definition of computer engineering than had been in popular use previously, to identify the social and national needs which provide the basis for encouraging research, to probe for obstacles to research and seek means of overcoming them and to delineate high-priority areas in which computer engineering research should be fostered. These included experimental software engineering, architectures in support of programming style, computer graphics, pattern recognition. VLSI design tools, machine intelligence, programmable automation, architectures for speech and signal processing, computer architecture and robotics. 13 references.

Computation: A New Open Access Journal of Computational Chemistry, Computational Biology and Computational Engineering

Directory of Open Access Journals (Sweden)

Karlheinz Schwarz

2013-09-01

Full Text Available Computation (ISSN 2079-3197; http://www.mdpi.com/journal/computation is an international scientific open access journal focusing on fundamental work in the field of computational science and engineering. Computational science has become essential in many research areas by contributing to solving complex problems in fundamental science all the way to engineering. The very broad range of application domains suggests structuring this journal into three sections, which are briefly characterized below. In each section a further focusing will be provided by occasionally organizing special issues on topics of high interests, collecting papers on fundamental work in the field. More applied papers should be submitted to their corresponding specialist journals. To help us achieve our goal with this journal, we have an excellent editorial board to advise us on the exciting current and future trends in computation from methodology to application. We very much look forward to hearing all about the research going on across the world. [...

Job Prospects for Electrical Engineers.

Science.gov (United States)

Basta, Nicholas

1986-01-01

Discusses the career outlook for electrical/electronics engineers. Explains that the number of bachelor degree graduates continues to rise, along with average starting salaries. Reveals that although the availability of jobs in the computer industry is leveling off, prospects in the robotics and telecommunication fields are growing. (TW)

Advanced structural wind engineering

CERN Document Server

Kareem, Ahsan

2013-01-01

This book serves as a textbook for advanced courses as it introduces state-of-the-art information and the latest research results on diverse problems in the structural wind engineering field. The topics include wind climates, design wind speed estimation, bluff body aerodynamics and applications, wind-induced building responses, wind, gust factor approach, wind loads on components and cladding, debris impacts, wind loading codes and standards, computational tools and computational fluid dynamics techniques, habitability to building vibrations, damping in buildings, and suppression of wind-induced vibrations. Graduate students and expert engineers will find the book especially interesting and relevant to their research and work.

AN EXPLORATORY STUDY OF DIVERSIFIED MENTORING RELATIONSHIPS AMONG GRADUATE STUDENTS AND THEIR ADVISORS IN SCIENCE, TECHNOLOGY, ENGINEERING, AND MATHEMATICS FIELDS

OpenAIRE

Bodden, Krystin R.

2014-01-01

Minorities and women continue to be underrepresented in science, technology, engineering, and mathematics (STEM) fields. In graduate education, factors such as racism, prejudice, discrimination, sexism, stereotypes, tokenism, and a lack of role models can all plague students and contribute to uncompleted degrees and non-entrance into STEM fields. One of the tools being used to combat these barriers is effective mentoring. Graduate students and their advisors generally have close working relat...

Self-Regulated Learning Strategies Applied to Undergraduate, Graduate and Specialization Students from Civil Engineering

Directory of Open Access Journals (Sweden)

Jose Carlos Redaelli

2013-03-01

Full Text Available The current demand for civil engineering work requires new skills and knowledge and calls for new and effective learning methods. This paper shows self-regulated learning strategies applied to undergraduate, graduate and specialization students from Civil Engineering in a Brazilian University. A Scale of Evaluation of Learning Strategies was administered with a view to identifying students´ cognitive, metacognitive and dysfunctional learning strategies.

Pioneering Integrated Education and Research Program in Graduate School of Engineering and its Inquiry by Questionnaire

Science.gov (United States)

Minamino, Yoritoshi

Department of Adaptive Machine Systems, Department of Materials and Manufucturing Science and Department of Business engineering have constructed the educational programs of consecutive system from master to doctor courses in graduate school of engineering, “Pioneering Integrated Education and Research Program (PP) ”, to produce volitional and original mind researchers with high abilities of research, internationality, leader, practice, management and economics by cooperation between them for reinforcement of their ordinary curriculums. This program consists of the basic PP for master course students and the international exchange PP, leadership pp and tie-up PP of company and University for Doctor course students. In 2005th the basic PP was given to the master course students and then their effectiveness of the PP was investigated by questionnaire. The results of questionnaire proved that the graduate school students improved their various abilities by the practical lesson in cooperation between companies and our Departments in the basic PP, and that the old boys after basic PP working in companies appreciated the advantages to business planning, original conception, finding solution, patents, discussion, report skills required in companies.

Modern mechanical engineering research, development and education

CERN Document Server

2014-01-01

This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

Engineering computer graphics in gas turbine engine design, analysis and manufacture

Science.gov (United States)

Lopatka, R. S.

1975-01-01

A time-sharing and computer graphics facility designed to provide effective interactive tools to a large number of engineering users with varied requirements was described. The application of computer graphics displays at several levels of hardware complexity and capability is discussed, with examples of graphics systems tracing gas turbine product development, beginning with preliminary design through manufacture. Highlights of an operating system stylized for interactive engineering graphics is described.

Computational problems in science and engineering

CERN Document Server

Bulucea, Aida; Tsekouras, George

2015-01-01

This book provides readers with modern computational techniques for solving variety of problems from electrical, mechanical, civil and chemical engineering. Mathematical methods are presented in a unified manner, so they can be applied consistently to problems in applied electromagnetics, strength of materials, fluid mechanics, heat and mass transfer, environmental engineering, biomedical engineering, signal processing, automatic control and more.

The cell method a purely algebraic computational method in physics and engineering

CERN Document Server

Ferretti, Elena

2014-01-01

The Cell Method (CM) is a computational tool that maintains critical multidimensional attributes of physical phenomena in analysis. This information is neglected in the differential formulations of the classical approaches of finite element, boundary element, finite volume, and finite difference analysis, often leading to numerical instabilities and spurious results. This book highlights the central theoretical concepts of the CM that preserve a more accurate and precise representation of the geometric and topological features of variables for practical problem solving. Important applications occur in fields such as electromagnetics, electrodynamics, solid mechanics and fluids. CM addresses non-locality in continuum mechanics, an especially important circumstance in modeling heterogeneous materials. Professional engineers and scientists, as well as graduate students, are offered: A general overview of physics and its mathematical descriptions; Guidance on how to build direct, discrete formulations; Coverag...

Software engineering frameworks for the cloud computing paradigm

CERN Document Server

Mahmood, Zaigham

2013-01-01

This book presents the latest research on Software Engineering Frameworks for the Cloud Computing Paradigm, drawn from an international selection of researchers and practitioners. The book offers both a discussion of relevant software engineering approaches and practical guidance on enterprise-wide software deployment in the cloud environment, together with real-world case studies. Features: presents the state of the art in software engineering approaches for developing cloud-suitable applications; discusses the impact of the cloud computing paradigm on software engineering; offers guidance an

Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) |

Science.gov (United States)

Transportation Research | NREL Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) Computer-Aided Engineering for Electric-Drive Vehicle Batteries (CAEBAT) Graphic of a 24-cell (bottom). Images: Courtesy of EC Power NREL's work on the U.S. Department of Energy Computer-Aided

From Ethnography to Items: A Mixed Methods Approach to Developing a Survey to Examine Graduate Engineering Student Retention

Science.gov (United States)

Crede, Erin; Borrego, Maura

2013-01-01

As part of a sequential exploratory mixed methods study, 9 months of ethnographically guided observations and interviews were used to develop a survey examining graduate engineering student retention. Findings from the ethnographic fieldwork yielded several themes, including international diversity, research group organization and climate,…

An Analog Computer for Electronic Engineering Education

Science.gov (United States)

Fitch, A. L.; Iu, H. H. C.; Lu, D. D. C.

2011-01-01

This paper describes a compact analog computer and proposes its use in electronic engineering teaching laboratories to develop student understanding of applications in analog electronics, electronic components, engineering mathematics, control engineering, safe laboratory and workshop practices, circuit construction, testing, and maintenance. The…

Computational System For Rapid CFD Analysis In Engineering

Science.gov (United States)

Barson, Steven L.; Ascoli, Edward P.; Decroix, Michelle E.; Sindir, Munir M.

1995-01-01

Computational system comprising modular hardware and software sub-systems developed to accelerate and facilitate use of techniques of computational fluid dynamics (CFD) in engineering environment. Addresses integration of all aspects of CFD analysis process, including definition of hardware surfaces, generation of computational grids, CFD flow solution, and postprocessing. Incorporates interfaces for integration of all hardware and software tools needed to perform complete CFD analysis. Includes tools for efficient definition of flow geometry, generation of computational grids, computation of flows on grids, and postprocessing of flow data. System accepts geometric input from any of three basic sources: computer-aided design (CAD), computer-aided engineering (CAE), or definition by user.

Physical Computing for STEAM Education: Maker-Educators' Experiences in an Online Graduate Course

Science.gov (United States)

Hsu, Yu-Chang; Ching, Yu-Hui; Baldwin, Sally

2018-01-01

This research explored how K-16 educators learned physical computing, and developed as maker-educators in an online graduate course. With peer support and instructor guidance, these educators designed maker projects using Scratch and Makey Makey, and developed educational maker proposals with plans of teaching the topics of their choice in STEAM…

Exploration of Factors Related to the Development of Science, Technology, Engineering, and Mathematics Graduate Teaching Assistants' Teaching Orientations

Science.gov (United States)

Gilmore, Joanna; Maher, Michelle A.; Feldon, David F.; Timmerman, Briana

2014-01-01

Research indicates that modifying teachers' beliefs about learning and teaching (i.e. teaching orientation) may be a prerequisite to changing their teaching practices. This mixed methods study quantitized data from interviews with 65 graduate teaching assistants (GTAs) from science, technology, engineering, and mathematics (STEM) fields to assess…

2017 The 7th International Conference on Computer Engineering and Networks

Science.gov (United States)

This conference proceeding is a collection of the papers accepted by the CENet 2017 - the 7th International Conference on Computer Engineering and Networks held on Shanghai from 22-23 July, 2017. This proceeding contains the five parts: Part I focuses on Machine learning (21 papers); Part II Wireless communication (21 papers); Part III Information theory (21 papers), Part IV Cloud science (14 papers) and Part V Data analysis (21 papers). Each part can be used as an excellent reference by industry practitioners, university faculty, and undergraduate as well as graduate students who need to build a knowledge base of the most current advances and state-of-practice in the topics covered by this conference proceedings. This will enable them to produce, maintain, and manage systems with high levels of trustworthiness and complexity Thanks go to the authors for their hard work and dedication as well as the reviewers for ensuring the selection of only the highest quality papers; their efforts made this proceedings possible.

Emerging Trends in Computing, Informatics, Systems Sciences, and Engineering

CERN Document Server

Elleithy, Khaled

2013-01-01

Emerging Trends in Computing, Informatics, Systems Sciences, and Engineering includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of  Industrial Electronics, Technology & Automation, Telecommunications and Networking, Systems, Computing Sciences and Software Engineering, Engineering Education, Instructional Technology, Assessment, and E-learning. This book includes the proceedings of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE 2010). The proceedings are a set of rigorously reviewed world-class manuscripts presenting the state of international practice in Innovative Algorithms and Techniques in Automation, Industrial Electronics and Telecommunications.

Graduate Student Program in Materials and Engineering Research and Development for Future Accelerators

Energy Technology Data Exchange (ETDEWEB)

Spentzouris, Linda [Illinois Inst. of Technology, Chicago, IL (United States)

2016-07-07

The objective of the proposal was to develop graduate student training in materials and engineering research relevant to the development of particle accelerators. Many components used in today's accelerators or storage rings are at the limit of performance. The path forward in many cases requires the development of new materials or fabrication techniques, or a novel engineering approach. Often, accelerator-based laboratories find it difficult to get top-level engineers or materials experts with the motivation to work on these problems. The three years of funding provided by this grant was used to support development of accelerator components through a multidisciplinary approach that cut across the disciplinary boundaries of accelerator physics, materials science, and surface chemistry. The following results were achieved: (1) significant scientific results on fabrication of novel photocathodes, (2) application of surface science and superconducting materials expertise to accelerator problems through faculty involvement, (3) development of instrumentation for fabrication and characterization of materials for accelerator components, (4) student involvement with problems at the interface of material science and accelerator physics.

Computing in Engineering Education: From There, to Here, to Where? Part 1: Computing.

Science.gov (United States)

Carnahan, Brice

1991-01-01

Presents the 1990 American Society for Engineering Education award lecture for the Chemical Engineering Division. Following a brief outline of what the computing world includes, the lecture traces computing technology from the early years to milestones, as well as current trends, in both hardware and software development. Highlights the…

The Power of Peer Mentoring in Enabling a Diverse and Inclusive Environment in a Chemical Engineering Graduate Program

Science.gov (United States)

Bôas Fávero, Cláudio Vilas; Moran, Shannon; Eniola-Adefeso, Omolola

2018-01-01

The Chemical Engineering graduate program at the University of Michigan implemented a peer mentoring program for PhD students, with the goal of fostering department inclusivity and improved academic outcomes through facilitated social and academic activities in diverse, small groups. In this article, we detail the peer mentoring program…

Computer-aided design for metabolic engineering.

Science.gov (United States)

Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

2014-12-20

The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes. Copyright © 2014 Elsevier B.V. All rights reserved.

Elementary mathematical and computational tools for electrical and computer engineers using Matlab

CERN Document Server

Manassah, Jamal T

2013-01-01

Ideal for use as a short-course textbook and for self-study Elementary Mathematical and Computational Tools for Electrical and Computer Engineers Using MATLAB fills that gap. Accessible after just one semester of calculus, it introduces the many practical analytical and numerical tools that are essential to success both in future studies and in professional life. Sharply focused on the needs of the electrical and computer engineering communities, the text provides a wealth of relevant exercises and design problems. Changes in MATLAB's version 6.0 are included in a special addendum.

Innovations and Advances in Computer, Information, Systems Sciences, and Engineering

CERN Document Server

Sobh, Tarek

2013-01-01

Innovations and Advances in Computer, Information, Systems Sciences, and Engineering includes the proceedings of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE 2011). The contents of this book are a set of rigorously reviewed, world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of  Industrial Electronics, Technology and Automation, Telecommunications and Networking, Systems, Computing Sciences and Software Engineering, Engineering Education, Instructional Technology, Assessment, and E-learning.

Future Communication, Computing, Control and Management Volume 1

CERN Document Server

2012-01-01

This volume contains revised and extended research articles written by prominent researchers participating in the ICF4C 2011 conference. 2011 International Conference on Future Communication, Computing, Control and Management (ICF4C 2011) has been held on December 16-17, 2011, Phuket, Thailand. Topics covered include intelligent computing, network management, wireless networks, telecommunication, power engineering, control engineering, Signal and Image Processing, Machine Learning, Control Systems and Applications, The book will offer the states of arts of tremendous advances in Computing, Communication, Control, and Management and also serve as an excellent reference work for researchers and graduate students working on Computing, Communication, Control, and Management Research.

Future Communication, Computing, Control and Management Volume 2

CERN Document Server

2012-01-01

This volume contains revised and extended research articles written by prominent researchers participating in the ICF4C 2011 conference. 2011 International Conference on Future Communication, Computing, Control and Management (ICF4C 2011) has been held on December 16-17, 2011, Phuket, Thailand. Topics covered include intelligent computing, network management, wireless networks, telecommunication, power engineering, control engineering, Signal and Image Processing, Machine Learning, Control Systems and Applications, The book will offer the states of arts of tremendous advances in Computing, Communication, Control, and Management and also serve as an excellent reference work for researchers and graduate students working on Computing, Communication, Control, and Management Research.

Future Computing, Communication, Control and Management Volume 2

CERN Document Server

2012-01-01

This volume contains revised and extended research articles written by prominent researchers participating in the ICF4C 2011 conference. 2011 International Conference on Future Communication, Computing, Control and Management (ICF4C 2011) has been held on December 16-17, 2011, Phuket, Thailand. Topics covered include intelligent computing, network management, wireless networks, telecommunication, power engineering, control engineering, Signal and Image Processing, Machine Learning, Control Systems and Applications, The book will offer the states of arts of tremendous advances in Computing, Communication, Control, and Management and also serve as an excellent reference work for researchers and graduate students working on Computing, Communication, Control, and Management Research.

Advanced computational approaches to biomedical engineering

CERN Document Server

Saha, Punam K; Basu, Subhadip

2014-01-01

There has been rapid growth in biomedical engineering in recent decades, given advancements in medical imaging and physiological modelling and sensing systems, coupled with immense growth in computational and network technology, analytic approaches, visualization and virtual-reality, man-machine interaction and automation. Biomedical engineering involves applying engineering principles to the medical and biological sciences and it comprises several topics including biomedicine, medical imaging, physiological modelling and sensing, instrumentation, real-time systems, automation and control, sig

Four-Cylinder Stirling-Engine Computer Program

Science.gov (United States)

Daniele, C. J.; Lorenzo, C. F.

1986-01-01

Computer program developed for simulating steady-state and transient performance of four-cylinder Stirling engine. In model, four cylinders interconnected by four working spaces. Each working space contains seven volumes: one for expansion space, heater, cooler, and compression space and three for regenerator. Thermal time constant for regenerator mass associated with each regenator gas volume. Former code generates results very quickly, since it has only 14 state variables with no energy equation. Current code then used to study various aspects of Stirling engine in much more detail. Program written in FORTRAN IV for use on IBM 370 computer.

Computer aided control engineering

DEFF Research Database (Denmark)

Szymkat, Maciej; Ravn, Ole

1997-01-01

Current developments in the field of Computer Aided Control Engineering (CACE) have a visible impact on the design methodologies and the structure of the software tools supporting them. Today control engineers has at their disposal libraries, packages or programming environments that may...... in CACE enhancing efficient flow of information between the tools supporting the following phases of the design process. In principle, this flow has to be two-way, and more or less automated, in order to enable the engineer to observe the propagation of the particular design decisions taken at various...... levels.The major conclusions of the paper are related with identifying the factors affecting the software tool integration in a way needed to facilitate design "inter-phase" communication. These are: standard application interfaces, dynamic data exchange mechanisms, code generation techniques and general...

Teaching cloud computing: a software engineering perspective

OpenAIRE

Sommerville, Ian

2012-01-01

This short papers discusses the issues of teaching cloud computing from a software engineering rather than a business perspective. It discusses what topics might be covered in a senior course on cloud software engineering.

Conformal geometry computational algorithms and engineering applications

CERN Document Server

Jin, Miao; He, Ying; Wang, Yalin

2018-01-01

This book offers an essential overview of computational conformal geometry applied to fundamental problems in specific engineering fields. It introduces readers to conformal geometry theory and discusses implementation issues from an engineering perspective.  The respective chapters explore fundamental problems in specific fields of application, and detail how computational conformal geometric methods can be used to solve them in a theoretically elegant and computationally efficient way. The fields covered include computer graphics, computer vision, geometric modeling, medical imaging, and wireless sensor networks. Each chapter concludes with a summary of the material covered and suggestions for further reading, and numerous illustrations and computational algorithms complement the text.  The book draws on courses given by the authors at the University of Louisiana at Lafayette, the State University of New York at Stony Brook, and Tsinghua University, and will be of interest to senior undergraduates, gradua...

Graduate Physics Education Adding Industrial Culture and Methods to a Traditional Graduate Physics Department

Science.gov (United States)

Vickers, Ken

2005-03-01

The education and training of the workforce needed to assure global competitiveness of American industry in high technology areas, along with the proper role of various disciplines in that educational process, is currently being re-examined. Several academic areas in science and engineering have reported results from such studies that revealed several broad themes of educational need that span and cross the boundaries of science and engineering. They included greater attention to and the development of team-building skills, personal or interactive skills, creative ability, and a business or entrepreneurial where-with-all. We will report in this paper the results of a fall 2000 Department of Education FIPSE grant to implement changes in its graduate physics program to address these issues. The proposal goal was to produce next-generation physics graduate students that are trained to evaluate and overcome complex technical problems by their participation in courses emphasizing the commercialization of technology research. To produce next-generation physics graduates who have learned to work with their student colleagues for their mutual success in an industrial-like group setting. And finally, to produce graduates who can lead interdisciplinary groups in solving complex problems in their career field.

Second Asia-Pacific Conference on the Computer Aided System Engineering

CERN Document Server

Chaczko, Zenon; Jacak, Witold; Łuba, Tadeusz; Computational Intelligence and Efficiency in Engineering Systems

2015-01-01

This carefully edited and reviewed volume addresses the increasingly popular demand for seeking more clarity in the data that we are immersed in. It offers excellent examples of the intelligent ubiquitous computation, as well as recent advances in systems engineering and informatics. The content represents state-of-the-art foundations for researchers in the domain of modern computation, computer science, system engineering and networking, with many examples that are set in industrial application context. The book includes the carefully selected best contributions to APCASE 2014, the 2nd Asia-Pacific Conference on  Computer Aided System Engineering, held February 10-12, 2014 in South Kuta, Bali, Indonesia. The book consists of four main parts that cover data-oriented engineering science research in a wide range of applications: computational models and knowledge discovery; communications networks and cloud computing; computer-based systems; and data-oriented and software-intensive systems.

Computer-Aided Engineering Education at the K.U. Leuven.

Science.gov (United States)

Snoeys, R.; Gobin, R.

1987-01-01

Describes some recent initiatives and developments in the computer-aided design program in the engineering faculty of the Katholieke Universiteit Leuven (Belgium). Provides a survey of the engineering curriculum, the computer facilities, and the main software packages available. (TW)

Elements of quantum computing history, theories and engineering applications

CERN Document Server

Akama, Seiki

2015-01-01

A quantum computer is a computer based on a computational model which uses quantum mechanics, which is a subfield of physics to study phenomena at the micro level. There has been a growing interest on quantum computing in the 1990's, and some quantum computers at the experimental level were recently implemented. Quantum computers enable super-speed computation, and can solve some important problems whose solutions were regarded impossible or intractable with traditional computers. This book provides a quick introduction to quantum computing for readers who have no backgrounds of both theory of computation and quantum mechanics. “Elements of Quantum Computing” presents the history, theories, and engineering applications of quantum computing. The book is suitable to computer scientists, physicist, and software engineers.

New trends in networking, computing, e-learning, systems sciences, and engineering

CERN Document Server

Sobh, Tarek

2015-01-01

This book includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of Computer Science, Informatics, and Systems Sciences, and Engineering. It includes selected papers form the conference proceedings of the Ninth International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE 2013). Coverage includes topics in: Industrial Electronics, Technology & Automation, Telecommunications and Networking, Systems, Computing Sciences and Software Engineering, Engineering Education, Instructional Technology, Assessment, and E-learning.  • Provides the latest in a series of books growing out of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering; • Includes chapters in the most advanced areas of Computing, Informatics, Systems Sciences, and Engineering; • Accessible to a wide range of readership, including professors, researchers, practitioners and...

Basic abstract algebra for graduate students and advanced undergraduates

CERN Document Server

Ash, Robert B

2006-01-01

Geared toward upper-level undergraduates and graduate students, this text surveys fundamental algebraic structures and maps between these structures. Its techniques are used in many areas of mathematics, with applications to physics, engineering, and computer science as well. Author Robert B. Ash, a Professor of Mathematics at the University of Illinois, focuses on intuitive thinking. He also conveys the intrinsic beauty of abstract algebra while keeping the proofs as brief and clear as possible.The early chapters provide students with background by investigating the basic properties of groups

Early Engagement in Course-Based Research Increases Graduation Rates and Completion of Science, Engineering, and Mathematics Degrees.

Science.gov (United States)

Rodenbusch, Stacia E; Hernandez, Paul R; Simmons, Sarah L; Dolan, Erin L

2016-01-01

National efforts to transform undergraduate biology education call for research experiences to be an integral component of learning for all students. Course-based undergraduate research experiences, or CUREs, have been championed for engaging students in research at a scale that is not possible through apprenticeships in faculty research laboratories. Yet there are few if any studies that examine the long-term effects of participating in CUREs on desired student outcomes, such as graduating from college and completing a science, technology, engineering, and mathematics (STEM) major. One CURE program, the Freshman Research Initiative (FRI), has engaged thousands of first-year undergraduates over the past decade. Using propensity score-matching to control for student-level differences, we tested the effect of participating in FRI on students' probability of graduating with a STEM degree, probability of graduating within 6 yr, and grade point average (GPA) at graduation. Students who completed all three semesters of FRI were significantly more likely than their non-FRI peers to earn a STEM degree and graduate within 6 yr. FRI had no significant effect on students' GPAs at graduation. The effects were similar for diverse students. These results provide the most robust and best-controlled evidence to date to support calls for early involvement of undergraduates in research. © 2016 S. Rodenbusch et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Innovations and advances in computing, informatics, systems sciences, networking and engineering

CERN Document Server

Elleithy, Khaled

2015-01-01

Innovations and Advances in Computing, Informatics, Systems Sciences, Networking and Engineering  This book includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of Computer Science, Informatics, and Systems Sciences, and Engineering. It includes selected papers from the conference proceedings of the Eighth and some selected papers of the Ninth International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE 2012 & CISSE 2013). Coverage includes topics in: Industrial Electronics, Technology & Automation, Telecommunications and Networking, Systems, Computing Sciences and Software Engineering, Engineering Education, Instructional Technology, Assessment, and E-learning.  ·       Provides the latest in a series of books growing out of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering; ·       Includes chapters in the most a...

Computational simulation of concurrent engineering for aerospace propulsion systems

Science.gov (United States)

Chamis, C. C.; Singhal, S. N.

1992-01-01

Results are summarized of an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulations methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties - fundamental in developing such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering for propulsion systems and systems in general. Benefits and facets needing early attention in the development are outlined.

Computational simulation for concurrent engineering of aerospace propulsion systems

Science.gov (United States)

Chamis, C. C.; Singhal, S. N.

1993-01-01

Results are summarized for an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulation methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties--fundamental to develop such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering of propulsion systems and systems in general. Benefits and issues needing early attention in the development are outlined.

Improving engineers' performance with computers

International Nuclear Information System (INIS)

Purvis, E.E. III

1984-01-01

The problem addressed is how to improve the performance of engineers in the design, operation, and maintenance of nuclear power plants. The application of computer science to this problem offers a challenge in maximizing the use of developments outside the nuclear industry and setting priorities to address the most fruitful areas first. Areas of potential benefits include data base management through design, analysis, procurement, construction, operation maintenance, cost, schedule and interface control and planning, and quality engineering on specifications, inspection, and training

Engineering and Computing Portal to Solve Environmental Problems

Science.gov (United States)

Gudov, A. M.; Zavozkin, S. Y.; Sotnikov, I. Y.

2018-01-01

This paper describes architecture and services of the Engineering and Computing Portal, which is considered to be a complex solution that provides access to high-performance computing resources, enables to carry out computational experiments, teach parallel technologies and solve computing tasks, including technogenic safety ones.

Computer-Based Mathematics Instructions for Engineering Students

Science.gov (United States)

Khan, Mustaq A.; Wall, Curtiss E.

1996-01-01

Almost every engineering course involves mathematics in one form or another. The analytical process of developing mathematical models is very important for engineering students. However, the computational process involved in the solution of some mathematical problems may be very tedious and time consuming. There is a significant amount of mathematical software such as Mathematica, Mathcad, and Maple designed to aid in the solution of these instructional problems. The use of these packages in classroom teaching can greatly enhance understanding, and save time. Integration of computer technology in mathematics classes, without de-emphasizing the traditional analytical aspects of teaching, has proven very successful and is becoming almost essential. Sample computer laboratory modules are developed for presentation in the classroom setting. This is accomplished through the use of overhead projectors linked to graphing calculators and computers. Model problems are carefully selected from different areas.

Mathematics for engineering, technology and computing science

CERN Document Server

Martin, Hedley G

1970-01-01

Mathematics for Engineering, Technology and Computing Science is a text on mathematics for courses in engineering, technology, and computing science. It covers linear algebra, ordinary differential equations, and vector analysis, together with line and multiple integrals. This book consists of eight chapters and begins with a discussion on determinants and linear equations, with emphasis on how the value of a determinant is defined and how it may be obtained. Solution of linear equations and the dependence between linear equations are also considered. The next chapter introduces the reader to

Graduate studies in instrumentation at the University of Provence

International Nuclear Information System (INIS)

Carette, M.; Reynard, C.; Claire, N.; Deschaintres, J. L.; Felts, B.; Lyoussi, A.; Andre, J.; Bertin, D.

2009-01-01

The University of Provence instrumentation department offers a high level of graduate and post graduate engineering programs. Its mission is to form technician experts and engineers with a deep knowledge in their discipline: metrology, instrumentation, tests, Research and Development, automatism and industrial process control. The specialty of master on test facilities instrumentation has been developed in collaboration with the French Atomic Energy Commission (CEA) since 2004. This curriculum offers now a specialization in nuclear detection and nuclear instrumentation. More than 80% of the graduates formed by block-release training of master find a job within 6 months

Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

Science.gov (United States)

Nan, Song

2018-03-01

Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

Computer security engineering management

International Nuclear Information System (INIS)

McDonald, G.W.

1988-01-01

For best results, computer security should be engineered into a system during its development rather than being appended later on. This paper addresses the implementation of computer security in eight stages through the life cycle of the system; starting with the definition of security policies and ending with continuing support for the security aspects of the system throughout its operational life cycle. Security policy is addressed relative to successive decomposition of security objectives (through policy, standard, and control stages) into system security requirements. This is followed by a discussion of computer security organization and responsibilities. Next the paper directs itself to analysis and management of security-related risks, followed by discussion of design and development of the system itself. Discussion of security test and evaluation preparations, and approval to operate (certification and accreditation), is followed by discussion of computer security training for users is followed by coverage of life cycle support for the security of the system

Graduate School and Fellowship Discussion

Energy Technology Data Exchange (ETDEWEB)

Farrar, Charles Reed [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-25

This was a presentation presented for the Los Alamos Dynamics Summer School. This is a set of slides about how to prepare for college, specifically graduate school. It gives instructions for succeeding and getting into a good school with financial aid through assistantships and scholarships, specifically applying to engineering backgrounds. Also, there are tips given for applying for fellowships and concludes with some general recommendations for graduate school.

CISM-IUTAM School on Advanced Turbulent Flow Computations

CERN Document Server

Krause, Egon

2000-01-01

This book collects the lecture notes concerning the IUTAM School on Advanced Turbulent Flow Computations held at CISM in Udine September 7–11, 1998. The course was intended for scientists, engineers and post-graduate students interested in the application of advanced numerical techniques for simulating turbulent flows. The topic comprises two closely connected main subjects: modelling and computation, mesh pionts necessary to simulate complex turbulent flow.

High Performance Computing in Science and Engineering '14

CERN Document Server

Kröner, Dietmar; Resch, Michael

2015-01-01

This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS). The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and   engineers. The book comes with a wealth of color illustrations and tables of results.  

Modern mathematics for the engineer first series

CERN Document Server

1956-01-01

This volume and its successor were conceived to advance the level of mathematical sophistication in the engineering community. The books particularly focus on material relevant to solving the kinds of mathematical problems regularly confronted by engineers. Suitable as a text for advanced undergraduate and graduate courses as well as a reference for professionals, Volume One's three-part treatment covers mathematical models, probabilistic problems, and computational considerations. Contributions include chapters on linear and nonlinear oscillations by Solomon Lefschetz, on hyperbolic partial

Using Computers in Fluids Engineering Education

Science.gov (United States)

Benson, Thomas J.

1998-01-01

Three approaches for using computers to improve basic fluids engineering education are presented. The use of computational fluid dynamics solutions to fundamental flow problems is discussed. The use of interactive, highly graphical software which operates on either a modern workstation or personal computer is highlighted. And finally, the development of 'textbooks' and teaching aids which are used and distributed on the World Wide Web is described. Arguments for and against this technology as applied to undergraduate education are also discussed.

Will Computer Engineer Barbie® Impact Young Women's Career Choices?

Science.gov (United States)

Martincic, Cynthia J.; Bhatnagar, Neelima

2012-01-01

Controversy and fanfare accompanied the announcement in 2010 by Mattel, Inc. of the Barbie® doll's 126th career--computer engineer. Even though women have been and still are in a minority in the information technology (IT) and computer science (CS) fields, enough women voted for the computer engineer as the next career for Barbie® on Mattel's…

An Introduction to Parallel Cluster Computing Using PVM for Computer Modeling and Simulation of Engineering Problems

International Nuclear Information System (INIS)

Spencer, VN

2001-01-01

An investigation has been conducted regarding the ability of clustered personal computers to improve the performance of executing software simulations for solving engineering problems. The power and utility of personal computers continues to grow exponentially through advances in computing capabilities such as newer microprocessors, advances in microchip technologies, electronic packaging, and cost effective gigabyte-size hard drive capacity. Many engineering problems require significant computing power. Therefore, the computation has to be done by high-performance computer systems that cost millions of dollars and need gigabytes of memory to complete the task. Alternately, it is feasible to provide adequate computing in the form of clustered personal computers. This method cuts the cost and size by linking (clustering) personal computers together across a network. Clusters also have the advantage that they can be used as stand-alone computers when they are not operating as a parallel computer. Parallel computing software to exploit clusters is available for computer operating systems like Unix, Windows NT, or Linux. This project concentrates on the use of Windows NT, and the Parallel Virtual Machine (PVM) system to solve an engineering dynamics problem in Fortran

African-American Women's Experiences in Graduate Science, Technology, Engineering, and Mathematics Education at a Predominantly White University: A Qualitative Investigation

Science.gov (United States)

Alexander, Quentin R.; Hermann, Mary A.

2016-01-01

In this phenomenological investigation we used qualitative research methodology to examine the experiences of 8 African American women in science, technology, engineering, and mathematics (STEM) graduate programs at 1 predominantly White university (PWU) in the South. Much of the current research in this area uses quantitative methods and only…

The Potential for Computer Based Systems in Modular Engineering

DEFF Research Database (Denmark)

Miller, Thomas Dedenroth

1998-01-01

The paper elaborates on knowledge management and the possibility for computer support of the design process of pharmaceutical production plants in relation to the ph.d. project modular engineering.......The paper elaborates on knowledge management and the possibility for computer support of the design process of pharmaceutical production plants in relation to the ph.d. project modular engineering....

Requirements engineering for software and systems

CERN Document Server

Laplante, Phillip A

2014-01-01

Solid requirements engineering has increasingly been recognized as the key to improved, on-time and on-budget delivery of software and systems projects. This book provides practical teaching for graduate and professional systems and software engineers. It uses extensive case studies and exercises to help students grasp concepts and techniques. With a focus on software-intensive systems, this text provides a probing and comprehensive review of recent developments in intelligent systems, soft computing techniques, and their diverse applications in manufacturing. The second edition contains 100% revised content and approximately 30% new material

Traditional Engineering Graphics versus Computer-Aided Drafting: A View from Academe.

Science.gov (United States)

Foster, Robert J.

1987-01-01

Argues for a legitimate role of manually expressed engineering graphics within engineering education as a needed support for computer-assisted drafting work. Discusses what and how students should learn as well as trends in engineering graphics education. Compares and contrasts manual and computer drafting methods. (CW)

Engineering Computer Games: A Parallel Learning Opportunity for Undergraduate Engineering and Primary (K-5 Students

Directory of Open Access Journals (Sweden)

Mark Michael Budnik

2011-04-01

Full Text Available In this paper, we present how our College of Engineering is developing a growing portfolio of engineering computer games as a parallel learning opportunity for undergraduate engineering and primary (grade K-5 students. Around the world, many schools provide secondary students (grade 6-12 with opportunities to pursue pre-engineering classes. However, by the time students reach this age, many of them have already determined their educational goals and preferred careers. Our College of Engineering is developing resources to provide primary students, still in their educational formative years, with opportunities to learn more about engineering. One of these resources is a library of engineering games targeted to the primary student population. The games are designed by sophomore students in our College of Engineering. During their Introduction to Computational Techniques course, the students use the LabVIEW environment to develop the games. This software provides a wealth of design resources for the novice programmer; using it to develop the games strengthens the undergraduates

Scientific computing in electrical engineering SCEE 2010

Energy Technology Data Exchange (ETDEWEB)

Michielsen, Bastiaan [Office National d' Etudes et de Recherches Aerospatiales (ONERA), 31 - Toulouse (France); Poirier, Jean-Rene (eds.) [LAPLACE-ENSEEIHT, Toulouse (France)

2012-07-01

Selected from papers presented at the 8th Scientific Computation in Electrical Engineering conference in Toulouse in 2010, the contributions to this volume cover every angle of numerically modelling electronic and electrical systems, including computational electromagnetics, circuit theory and simulation and device modelling. On computational electromagnetics, the chapters examine cutting-edge material ranging from low-frequency electrical machine modelling problems to issues in high-frequency scattering. Regarding circuit theory and simulation, the book details the most advanced techniques for modelling networks with many thousands of components. Modelling devices at microscopic levels is covered by a number of fundamental mathematical physics papers, while numerous papers on model order reduction help engineers and systems designers to bring their modelling of industrial-scale systems within the reach of present-day computational power. Complementing these more specific papers, the volume also contains a selection of mathematical methods which can be used in any application domain. (orig.)

ABET [Accreditation Board for Engineering and Technology] accreditation for engineering technology

International Nuclear Information System (INIS)

Foulke, L.R.

1989-01-01

Engineering technology is that part of the technological field that requires the application of scientific and engineering knowledge and methods combined with technical skills in support of engineering activities. It lies in the occupational spectrum between the craftsman and the engineer at the end of the spectrum closest to the engineer. The term engineering technician is applied to the graduates of associate degree programs. Graduates of baccalaureate programs are called engineering technologists. The content of a 4-yr engineering technology program treats the same subject areas as does an engineering program but with more emphasis on application, use of established design concepts, and the laboratory experience rather than on science, conceptual design, and new development. The mathematics content of accreditable baccalaureate programs must contain at least 12 semester-hour credits of mathematics including the study of calculus. Engineering managers should take a hard look at what is really needed in the education of that majority of a personnel who do not work as design and development engineers. Graduates of engineering technology programs may be better qualified than those of some engineering programs for the majority of jobs in our industry today

Development of computer aided engineering system for TRAC applications

International Nuclear Information System (INIS)

Arai, Kenji; Itoya, Seihiro; Uematsu, Hitoshi; Tsunoyama, Shigeaki

1990-01-01

An advanced best estimate computer program for nuclear reactor transient analysis, TRAC has been extensively used to carry out various thermal hydraulic calculations in the nuclear engineering field, because of its versatility. To perform efficiently a wide variety of TRAC calculation, the efficient utilization of computers and the convenient environment for input and output processing is necessary. We have applied a computer network comprising a super-computer, engineering work stations and personal computers to TRAC calculations and have assigned the appropriate functions to each computer. We have also been developing an interactive graphics system for input and output processing on an EWS. This hardware and software environment can improve the effectiveness of TRAC utilization for various thermal hydraulic calculations. (author)

A Graduate Professional Program in Translation.

Science.gov (United States)

Waldinger, Renee

1987-01-01

The City University of New York Graduate School's professional program in translation combines high-level, specialized language learning in French, German, and Spanish with related graduate work in such disciplines as international affairs, finance, banking, jurisprudence, literature, and computer science. (CB)

Solving computationally expensive engineering problems

CERN Document Server

Leifsson, Leifur; Yang, Xin-She

2014-01-01

Computational complexity is a serious bottleneck for the design process in virtually any engineering area. While migration from prototyping and experimental-based design validation to verification using computer simulation models is inevitable and has a number of advantages, high computational costs of accurate, high-fidelity simulations can be a major issue that slows down the development of computer-aided design methodologies, particularly those exploiting automated design improvement procedures, e.g., numerical optimization. The continuous increase of available computational resources does not always translate into shortening of the design cycle because of the growing demand for higher accuracy and necessity to simulate larger and more complex systems. Accurate simulation of a single design of a given system may be as long as several hours, days or even weeks, which often makes design automation using conventional methods impractical or even prohibitive. Additional problems include numerical noise often pr...

Designing a hands-on brain computer interface laboratory course.

Science.gov (United States)

Khalighinejad, Bahar; Long, Laura Kathleen; Mesgarani, Nima

2016-08-01

Devices and systems that interact with the brain have become a growing field of research and development in recent years. Engineering students are well positioned to contribute to both hardware development and signal analysis techniques in this field. However, this area has been left out of most engineering curricula. We developed an electroencephalography (EEG) based brain computer interface (BCI) laboratory course to educate students through hands-on experiments. The course is offered jointly by the Biomedical Engineering, Electrical Engineering, and Computer Science Departments of Columbia University in the City of New York and is open to senior undergraduate and graduate students. The course provides an effective introduction to the experimental design, neuroscience concepts, data analysis techniques, and technical skills required in the field of BCI.

Trusted computing platforms TPM2.0 in context

CERN Document Server

Proudler, Graeme; Dalton, Chris

2015-01-01

In this book the authors first describe the background of trusted platforms and trusted computing and speculate about the future. They then describe the technical features and architectures of trusted platforms from several different perspectives, finally explaining second-generation TPMs, including a technical description intended to supplement the Trusted Computing Group's TPM2 specifications. The intended audience is IT managers and engineers and graduate students in information security.

Nuclear engineering experiments at experimental facilities of JNC in graduate course of Tokyo Institute of Technology

International Nuclear Information System (INIS)

Hayashizaki, Noriyosu; Takahashi, Minoru; Aoyama, Takafumi; Onose, Shoji

2005-01-01

Nuclear engineering experiments using outside facilities of the campus have been offered for graduate students in the nuclear engineering course in Tokyo Institute of Technology (Tokyo Tech.). The experiments are managed with the collaboration of Japan Nuclear Cycle Development Institute (JNC), Japan Atomic Energy Research Institute (JAERI) and Research Reactor Institute, Kyoto University (KUR). This report presents the new curriculum of the nuclear engineering experiments at JNC since 2002. The change is due to the shutdown of Deuterium Criticality Assembly Facility (DCA) that was used as an experimental facility until 2001. Reactor physics experiment using the training simulator of the experimental fast reactor JOYO is continued from the previous curriculum with the addition of the criticality approach experiment and control rods calibration. A new experimental subject is an irradiated material experiment at the Material Monitoring Facility (MMF). As a result, both are acceptable as the student experiments on the fast reactor. (author)

Nuclear Power Engineering Education Program, University of Illinois

International Nuclear Information System (INIS)

Jones, B.G.

1993-01-01

The DOE/CECo Nuclear Power Engineering Education Program at the University of Illinois in its first year has significantly impacted the quality of the power education which our students receive. It has contributed to: the recently completed upgrade of the console of our Advanced TRIGA reactor which increases the reactor's utility for training, the procurement of new equipment to upgrade and refurbish several of the undergraduate laboratory set-ups, and the procurement of computational workstations in support of the instructional computing laboratory. In addition, smaller amounts of funds were used for the recruitment and retention of top quality graduate students, the support of faculty to visit other institutions to attract top students into the discipline, and to provide funds for faculty to participate in short courses to improve their skills and background in the power area. These items and activities have helped elevate in the student's perspective the role of nuclear power in the discipline. We feel this is having a favorable impact on student career selection and on ensuring the continued supply of well educated nuclear engineering graduates

Do Gender Differences in Perceived Prototypical Computer Scientists and Engineers Contribute to Gender Gaps in Computer Science and Engineering?

Science.gov (United States)

Ehrlinger, Joyce; Plant, E Ashby; Hartwig, Marissa K; Vossen, Jordan J; Columb, Corey J; Brewer, Lauren E

2018-01-01

Women are vastly underrepresented in the fields of computer science and engineering (CS&E). We examined whether women might view the intellectual characteristics of prototypical individuals in CS&E in more stereotype-consistent ways than men might and, consequently, show less interest in CS&E. We asked 269 U.S. college students (187, 69.5% women) to describe the prototypical computer scientist (Study 1) or engineer (Study 2) through open-ended descriptions as well as through a set of trait ratings. Participants also rated themselves on the same set of traits and rated their similarity to the prototype. Finally, participants in both studies were asked to describe their likelihood of pursuing future college courses and careers in computer science (Study 1) or engineering (Study 2). Across both studies, we found that women offered more stereotype-consistent ratings than did men of the intellectual characteristics of prototypes in CS (Study 1) and engineering (Study 2). Women also perceived themselves as less similar to the prototype than men did. Further, the observed gender differences in prototype perceptions mediated the tendency for women to report lower interest in CS&E fields relative to men. Our work highlights the importance of prototype perceptions for understanding the gender gap in CS&E and suggests avenues for interventions that may increase women's representation in these vital fields.

Bacterial computing with engineered populations.

Science.gov (United States)

Amos, Martyn; Axmann, Ilka Maria; Blüthgen, Nils; de la Cruz, Fernando; Jaramillo, Alfonso; Rodriguez-Paton, Alfonso; Simmel, Friedrich

2015-07-28

We describe strategies for the construction of bacterial computing platforms by describing a number of results from the recently completed bacterial computing with engineered populations project. In general, the implementation of such systems requires a framework containing various components such as intracellular circuits, single cell input/output and cell-cell interfacing, as well as extensive analysis. In this overview paper, we describe our approach to each of these, and suggest possible areas for future research. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Use of Soft Computing Technologies For Rocket Engine Control

Science.gov (United States)

Trevino, Luis C.; Olcmen, Semih; Polites, Michael

2003-01-01

The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to further improve overall engine system reliability and performance. Specifically, this will be presented by enhancing rocket engine control and engine health management (EHM) using SCT coupled with conventional control technologies, and sound software engineering practices used in Marshall s Flight Software Group. The principle goals are to improve software management, software development time and maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control and EHM methodologies, but to provide alternative design choices for control, EHM, implementation, performance, and sustaining engineering. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion, software engineering for embedded systems, and soft computing technologies (i.e., neural networks, fuzzy logic, and Bayesian belief networks), much of which is presented in this paper. The first targeted demonstration rocket engine platform is the MC-1 (formerly FASTRAC Engine) which is simulated with hardware and software in the Marshall Avionics & Software Testbed laboratory that

Efficient Parallel Engineering Computing on Linux Workstations

Science.gov (United States)

Lou, John Z.

2010-01-01

A C software module has been developed that creates lightweight processes (LWPs) dynamically to achieve parallel computing performance in a variety of engineering simulation and analysis applications to support NASA and DoD project tasks. The required interface between the module and the application it supports is simple, minimal and almost completely transparent to the user applications, and it can achieve nearly ideal computing speed-up on multi-CPU engineering workstations of all operating system platforms. The module can be integrated into an existing application (C, C++, Fortran and others) either as part of a compiled module or as a dynamically linked library (DLL).

PCACE-Personal-Computer-Aided Cabling Engineering

Science.gov (United States)

Billitti, Joseph W.

1987-01-01

PCACE computer program developed to provide inexpensive, interactive system for learning and using engineering approach to interconnection systems. Basically database system that stores information as files of individual connectors and handles wiring information in circuit groups stored as records. Directly emulates typical manual engineering methods of handling data, thus making interface between user and program very natural. Apple version written in P-Code Pascal and IBM PC version of PCACE written in TURBO Pascal 3.0

Soft computing techniques in engineering applications

CERN Document Server

Zhong, Baojiang

2014-01-01

The Soft Computing techniques, which are based on the information processing of biological systems are now massively used in the area of pattern recognition, making prediction & planning, as well as acting on the environment. Ideally speaking, soft computing is not a subject of homogeneous concepts and techniques; rather, it is an amalgamation of distinct methods that confirms to its guiding principle. At present, the main aim of soft computing is to exploit the tolerance for imprecision and uncertainty to achieve tractability, robustness and low solutions cost. The principal constituents of soft computing techniques are probabilistic reasoning, fuzzy logic, neuro-computing, genetic algorithms, belief networks, chaotic systems, as well as learning theory. This book covers contributions from various authors to demonstrate the use of soft computing techniques in various applications of engineering.  

Computational Experiments for Science and Engineering Education

Science.gov (United States)

Xie, Charles

2011-01-01

How to integrate simulation-based engineering and science (SBES) into the science curriculum smoothly is a challenging question. For the importance of SBES to be appreciated, the core value of simulations-that they help people understand natural phenomena and solve engineering problems-must be taught. A strategy to achieve this goal is to introduce computational experiments to the science curriculum to replace or supplement textbook illustrations and exercises and to complement or frame hands-on or wet lab experiments. In this way, students will have an opportunity to learn about SBES without compromising other learning goals required by the standards and teachers will welcome these tools as they strengthen what they are already teaching. This paper demonstrates this idea using a number of examples in physics, chemistry, and engineering. These exemplary computational experiments show that it is possible to create a curriculum that is both deeper and wider.

Computational modeling for eco engineering: Making the connections between engineering and ecology (Invited)

Science.gov (United States)

Bowles, C.

2013-12-01

Ecological engineering, or eco engineering, is an emerging field in the study of integrating ecology and engineering, concerned with the design, monitoring, and construction of ecosystems. According to Mitsch (1996) 'the design of sustainable ecosystems intends to integrate human society with its natural environment for the benefit of both'. Eco engineering emerged as a new idea in the early 1960s, and the concept has seen refinement since then. As a commonly practiced field of engineering it is relatively novel. Howard Odum (1963) and others first introduced it as 'utilizing natural energy sources as the predominant input to manipulate and control environmental systems'. Mtisch and Jorgensen (1989) were the first to define eco engineering, to provide eco engineering principles and conceptual eco engineering models. Later they refined the definition and increased the number of principles. They suggested that the goals of eco engineering are: a) the restoration of ecosystems that have been substantially disturbed by human activities such as environmental pollution or land disturbance, and b) the development of new sustainable ecosystems that have both human and ecological values. Here a more detailed overview of eco engineering is provided, particularly with regard to how engineers and ecologists are utilizing multi-dimensional computational models to link ecology and engineering, resulting in increasingly successful project implementation. Descriptions are provided pertaining to 1-, 2- and 3-dimensional hydrodynamic models and their use at small- and large-scale applications. A range of conceptual models that have been developed to aid the in the creation of linkages between ecology and engineering are discussed. Finally, several case studies that link ecology and engineering via computational modeling are provided. These studies include localized stream rehabilitation, spawning gravel enhancement on a large river system, and watershed-wide floodplain modeling of

ESHOPPS: A COMPUTATIONAL TOOL TO AID THE TEACHING OF SHORTEST PATH ALGORITHMS

Directory of Open Access Journals (Sweden)

S. J. de A. LIMA

2015-07-01

Full Text Available The development of a computational tool called EShoPPS – Environment for Shortest Path Problem Solving, which is used to assist students in understanding the working of Dijkstra, Greedy search and A*(star algorithms is presented in this paper. Such algorithms are commonly taught in graduate and undergraduate courses of Engineering and Informatics and are used for solving many optimization problems that can be characterized as Shortest Path Problem. The EShoPPS is an interactive tool that allows students to create a graph representing the problem and also helps in developing their knowledge of each specific algorithm. Experiments performed with 155 students of undergraduate and graduate courses such as Industrial Engineering, Computer Science and Information Systems have shown that by using the EShoPPS tool students were able to improve their interpretation of investigated algorithms.

On the Role of Computer Graphics in Engineering Design Graphics Courses.

Science.gov (United States)

Pleck, Michael H.

The implementation of two- and three-dimensional computer graphics in a freshmen engineering design course at the university level is described. An assessment of the capabilities and limitations of computer graphics is made, along with a presentation of the fundamental role which computer graphics plays in engineering design instruction.…

Computer, Network, Software, and Hardware Engineering with Applications

CERN Document Server

Schneidewind, Norman F

2012-01-01

There are many books on computers, networks, and software engineering but none that integrate the three with applications. Integration is important because, increasingly, software dominates the performance, reliability, maintainability, and availability of complex computer and systems. Books on software engineering typically portray software as if it exists in a vacuum with no relationship to the wider system. This is wrong because a system is more than software. It is comprised of people, organizations, processes, hardware, and software. All of these components must be considered in an integr

An introduction to computational micromechanics

CERN Document Server

Zohdi, Tarek I; Zohdi, Tarek I

2004-01-01

In this, its second corrected printing, Zohdi and Wriggers' illuminating text presents a comprehensive introduction to the subject. The authors include in their scope basic homogenization theory, microstructural optimization and multifield analysis of heterogeneous materials. This volume is ideal for researchers and engineers, and can be used in a first-year course for graduate students with an interest in the computational micromechanical analysis of new materials.

Practical applications of soft computing in engineering

CERN Document Server

2001-01-01

Soft computing has been presented not only with the theoretical developments but also with a large variety of realistic applications to consumer products and industrial systems. Application of soft computing has provided the opportunity to integrate human-like vagueness and real-life uncertainty into an otherwise hard computer program. This book highlights some of the recent developments in practical applications of soft computing in engineering problems. All the chapters have been sophisticatedly designed and revised by international experts to achieve wide but in-depth coverage. Contents: Au

Tensor analysis and elementary differential geometry for physicists and engineers

CERN Document Server

Nguyen-Schäfer, Hung

2014-01-01

Tensors and methods of differential geometry are very useful mathematical tools in many fields of modern physics and computational engineering including relativity physics, electrodynamics, computational fluid dynamics (CFD), continuum mechanics, aero and vibroacoustics, and cybernetics. This book comprehensively presents topics, such as bra-ket notation, tensor analysis, and elementary differential geometry of a moving surface. Moreover, authors intentionally abstain from giving mathematically rigorous definitions and derivations that are however dealt with as precisely as possible. The reader is provided with hands-on calculations and worked-out examples at which he will learn how to handle the bra-ket notation, tensors and differential geometry and to use them in the physical and engineering world. The target audience primarily comprises graduate students in physics and engineering, research scientists, and practicing engineers.

Computer-aided modeling for efficient and innovative product-process engineering

DEFF Research Database (Denmark)

Heitzig, Martina

Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy and water. This trend is set to continue due to the substantial benefits computer...... in chemical and biochemical engineering have been solved to illustrate the application of the generic modelling methodology, the computeraided modelling framework and the developed software tool.......-aided methods provide. The key prerequisite of computer-aided productprocess engineering is however the availability of models of different types, forms and application modes. The development of the models required for the systems under investigation tends to be a challenging, time-consuming and therefore cost...

Information retrieval implementing and evaluating search engines

CERN Document Server

Büttcher, Stefan; Cormack, Gordon V

2016-01-01

Information retrieval is the foundation for modern search engines. This textbook offers an introduction to the core topics underlying modern search technologies, including algorithms, data structures, indexing, retrieval, and evaluation. The emphasis is on implementation and experimentation; each chapter includes exercises and suggestions for student projects. Wumpus -- a multiuser open-source information retrieval system developed by one of the authors and available online -- provides model implementations and a basis for student work. The modular structure of the book allows instructors to use it in a variety of graduate-level courses, including courses taught from a database systems perspective, traditional information retrieval courses with a focus on IR theory, and courses covering the basics of Web retrieval. In addition to its classroom use, Information Retrieval will be a valuable reference for professionals in computer science, computer engineering, and software engineering.

Generating human resources in nuclear engineering in India: need of the hour

International Nuclear Information System (INIS)

Roy, Prateep

2010-01-01

With the fast growth of energy requirement scenario, particularly, in India with limited dependence on fossil power and increased emphasis on green power we have lots of nuclear power plant and associated projects in pipeline. This requires enormous human resources trained and qualified in nuclear engineering who will be engaged in all aspects of nuclear plant projects right from conceptualization, design, construction, development, operation, maintenance till decommissioning. As on today, Department of Atomic Energy (DAE) in Government of India is almost the only agency catering to this need. DAE grooms graduate engineers from various disciplines and postgraduates from sciences, specially, Physics and Chemistry. But, it takes enough financial resources and full 1-year duration past graduation from Indian Government. Even after imparting training to these freshly recruited DAE employees, sizeable chunk of the population quit DAE for better prospect such as higher studies abroad, management studies, IT profession etc. Also, the people trained in nuclear engineering are fewer in number than required and the gap would be increasingly large as time progresses and increasing number of nuclear plants would be constructed/operational. Comparatively larger number of engineering graduates currently produced in India are in Computer Engineering/Information Technology rather than in conventional disciplines like Civil, Mechanical, Electrical, Electronics and Telecommunications Engineering. This poses another problem of orienting/motivating the manpower in nuclear fields. Considering these problems the author proposes to produce and develop nuclear engineering graduates directly in the academic institutions which will help the nation in reducing the gap between the increasing demand of manpower in view of large number of nuclear plants in the pipeline and the availability of the nuclear engineers. Even large number of industries related to manufacturing and consultancy also

First International Conference on Electrical, Electronic and Communications Engineering

CERN Document Server

Vyas, Nalinaksh; Sanei, Saeid; Deb, Kalyanmoy

2017-01-01

The book reports on advanced theories and methods in two related engineering fields: electrical and electronic engineering, and communications engineering and computing. It highlights areas of global and growing importance, such as renewable energy, power systems, mobile communications, security and the Internet of Things (IoT). The contributions cover a number of current research issues, including smart grids, photovoltaic systems, wireless power transfer, signal processing, 4G and 5G technologies, IoT applications, mobile cloud computing and many more. Based on the proceedings of the first International Conference on Emerging Trends in Electrical, Electronic and Communications Engineering (ELECOM 2016), held in Voila Bagatelle, Mauritius from November 25 to 27, 2016, the book provides graduate students, researchers and professionals with a snapshot of the state-of-the-art and a source of new ideas for future research and collaborations.

Parallel Computational Fluid Dynamics 2007 : Implementations and Experiences on Large Scale and Grid Computing

CERN Document Server

2009-01-01

At the 19th Annual Conference on Parallel Computational Fluid Dynamics held in Antalya, Turkey, in May 2007, the most recent developments and implementations of large-scale and grid computing were presented. This book, comprised of the invited and selected papers of this conference, details those advances, which are of particular interest to CFD and CFD-related communities. It also offers the results related to applications of various scientific and engineering problems involving flows and flow-related topics. Intended for CFD researchers and graduate students, this book is a state-of-the-art presentation of the relevant methodology and implementation techniques of large-scale computing.

Proceedings of the 2011 International Conference on Informatics, Cybernetics, and Computer Engineering

CERN Document Server

2012-01-01

The volume includes a set of selected papers extended and revised from the International Conference on Informatics, Cybernetics, and Computer Engineering. An information system (IS) is any combination of information technology and people's activities using that technology to support operations, management.  Computer engineering is a discipline that integrates several fields of electrical engineering and computer science required to develop computer systems. ICCE 2011 Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Information system and Software Engineering to disseminate their latest research results and exchange views on the future research directions of these fields. 81 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor.

Applications of computational tools in biosciences and medical engineering

CERN Document Server

Altenbach, Holm

2015-01-01

 This book presents the latest developments and applications of computational tools related to the biosciences and medical engineering. It also reports the findings of different multi-disciplinary research projects, for example, from the areas of scaffolds and synthetic bones, implants and medical devices, and medical materials. It is also shown that the application of computational tools often requires mathematical and experimental methods. Computational tools such as the finite element methods, computer-aided design and optimization as well as visualization techniques such as computed axial tomography open up completely new research fields that combine the fields of engineering and bio/medical. Nevertheless, there are still hurdles since both directions are based on quite different ways of education. Often even the “language” can vary from discipline to discipline.

Diving Deep: A Comparative Study of Educator Undergraduate and Graduate Backgrounds and Their Effect on Student Understanding of Engineering and Engineering Careers, Utilizing an Underwater Robotics Program

Science.gov (United States)

Scribner, J. Adam

Numerous studies have demonstrated that educators having degrees in their subjects significantly enhances student achievement, particularly in secondary mathematics and science (Chaney, 1995; Goe, 2007; Rowan, Chiang, & Miller, 1997; Wenglinsky, 2000). Yet, science teachers in states that adopt the Next Generation Science Standards will be facilitating classroom engineering activities despite the fact that few have backgrounds in engineering. This quantitative study analyzed ex-post facto WaterBotics (an innovative underwater robotics curriculum for middle and high school students) data to determine if educators having backgrounds in engineering (i.e., undergraduate and graduate degrees in engineering) positively affected student learning on two engineering outcomes: 1) the engineering design process, and 2) understanding of careers in engineering (who engineers are and what engineers do). The results indicated that educators having backgrounds in engineering did not significantly affect student understanding of the engineering design process or careers in engineering when compared to educators having backgrounds in science, mathematics, technology education, or other disciplines. There were, however, statistically significant differences between the groups of educators. Students of educators with backgrounds in technology education had the highest mean score on assessments pertaining to the engineering design process while students of educators with disciplines outside of STEM had the highest mean scores on instruments that assess for student understanding of careers in engineering. This might be due to the fact that educators who lack degrees in engineering but who teach engineering do a better job of "sticking to the script" of engineering curricula.

Computational intelligence and quantitative software engineering

CERN Document Server

Succi, Giancarlo; Sillitti, Alberto

2016-01-01

In a down-to-the earth manner, the volume lucidly presents how the fundamental concepts, methodology, and algorithms of Computational Intelligence are efficiently exploited in Software Engineering and opens up a novel and promising avenue of a comprehensive analysis and advanced design of software artifacts. It shows how the paradigm and the best practices of Computational Intelligence can be creatively explored to carry out comprehensive software requirement analysis, support design, testing, and maintenance. Software Engineering is an intensive knowledge-based endeavor of inherent human-centric nature, which profoundly relies on acquiring semiformal knowledge and then processing it to produce a running system. The knowledge spans a wide variety of artifacts, from requirements, captured in the interaction with customers, to design practices, testing, and code management strategies, which rely on the knowledge of the running system. This volume consists of contributions written by widely acknowledged experts ...

A curriculum for real-time computer and control systems engineering

Science.gov (United States)

Halang, Wolfgang A.

1990-01-01

An outline of a syllabus for the education of real-time-systems engineers is given. This comprises the treatment of basic concepts, real-time software engineering, and programming in high-level real-time languages, real-time operating systems with special emphasis on such topics as task scheduling, hardware architectures, and especially distributed automation structures, process interfacing, system reliability and fault-tolerance, and integrated project development support systems. Accompanying course material and laboratory work are outlined, and suggestions for establishing a laboratory with advanced, but low-cost, hardware and software are provided. How the curriculum can be extended into a second semester is discussed, and areas for possible graduate research are listed. The suitable selection of a high-level real-time language and supporting operating system for teaching purposes is considered.

Nonlinear dynamics as an engine of computation.

Science.gov (United States)

Kia, Behnam; Lindner, John F; Ditto, William L

2017-03-06

Control of chaos teaches that control theory can tame the complex, random-like behaviour of chaotic systems. This alliance between control methods and physics-cybernetical physics-opens the door to many applications, including dynamics-based computing. In this article, we introduce nonlinear dynamics and its rich, sometimes chaotic behaviour as an engine of computation. We review our work that has demonstrated how to compute using nonlinear dynamics. Furthermore, we investigate the interrelationship between invariant measures of a dynamical system and its computing power to strengthen the bridge between physics and computation.This article is part of the themed issue 'Horizons of cybernetical physics'. © 2017 The Author(s).

Software Engineering for Scientific Computer Simulations

Science.gov (United States)

Post, Douglass E.; Henderson, Dale B.; Kendall, Richard P.; Whitney, Earl M.

2004-11-01

Computer simulation is becoming a very powerful tool for analyzing and predicting the performance of fusion experiments. Simulation efforts are evolving from including only a few effects to many effects, from small teams with a few people to large teams, and from workstations and small processor count parallel computers to massively parallel platforms. Successfully making this transition requires attention to software engineering issues. We report on the conclusions drawn from a number of case studies of large scale scientific computing projects within DOE, academia and the DoD. The major lessons learned include attention to sound project management including setting reasonable and achievable requirements, building a good code team, enforcing customer focus, carrying out verification and validation and selecting the optimum computational mathematics approaches.

Brains--Computers--Machines: Neural Engineering in Science Classrooms

Science.gov (United States)

Chudler, Eric H.; Bergsman, Kristen Clapper

2016-01-01

Neural engineering is an emerging field of high relevance to students, teachers, and the general public. This feature presents online resources that educators and scientists can use to introduce students to neural engineering and to integrate core ideas from the life sciences, physical sciences, social sciences, computer science, and engineering…

The experiences of female high school students and interest in STEM: Factors leading to the selection of an engineering or computer science major

Science.gov (United States)

Genoways, Sharon K.

STEM (Science, Technology, Engineering and Math) education creates critical thinkers, increases science literacy, and enables the next generation of innovators, which leads to new products and processes that sustain our economy (Hossain & Robinson, 2012). We have been hearing the warnings for several years, that there simply are not enough young scientists entering into the STEM professional pathways to replace all of the retiring professionals (Brown, Brown, Reardon, & Merrill, 2011; Harsh, Maltese, & Tai, 2012; Heilbronner, 2011; Scott, 2012). The problem is not necessarily due to a lack of STEM skills and concept proficiency. There also appears to be a lack of interest in these fields. Recent evidence suggests that many of the most proficient students, especially minority students and women, have been gravitating away from science and engineering toward other professions. (President's Council of Advisors on Science and Technology, 2010). The purpose of this qualitative research study was an attempt to determine how high schools can best prepare and encourage young women for a career in engineering or computer science. This was accomplished by interviewing a pool of 21 women, 5 recent high school graduates planning to major in STEM, 5 college students who had completed at least one full year of coursework in an engineering or computer science major and 11 professional women who had been employed as an engineer or computer scientist for at least one full year. These women were asked to share the high school courses, activities, and experiences that best prepared them to pursue an engineering or computer science major. Five central themes emerged from this study; coursework in physics and calculus, promotion of STEM camps and clubs, teacher encouragement of STEM capabilities and careers, problem solving, critical thinking and confidence building activities in the classroom, and allowing students the opportunity to fail and ask questions in a safe environment. These

International Conference on Computational Engineering Science

CERN Document Server

Yagawa, G

1988-01-01

The aim of this Conference was to become a forum for discussion of both academic and industrial research in those areas of computational engineering science and mechanics which involve and enrich the rational application of computers, numerical methods, and mechanics, in modern technology. The papers presented at this Conference cover the following topics: Solid and Structural Mechanics, Constitutive Modelling, Inelastic and Finite Deformation Response, Transient Analysis, Structural Control and Optimization, Fracture Mechanics and Structural Integrity, Computational Fluid Dynamics, Compressible and Incompressible Flow, Aerodynamics, Transport Phenomena, Heat Transfer and Solidification, Electromagnetic Field, Related Soil Mechanics and MHD, Modern Variational Methods, Biomechanics, and Off-Shore-Structural Mechanics.

CUBE (Computer Use By Engineers) symposium abstracts

International Nuclear Information System (INIS)

Ruminer, J.J.

1978-07-01

This report presents the abstracts for the CUBE (Computer Use by Engineers) Symposium, October 4, through 6, 1978. Contributors are from Lawrence Livermore Laboratory, Los Alamos Scientific Laboratory, and Sandia Laboratories

Computational methods in metabolic engineering for strain design.

Science.gov (United States)

Long, Matthew R; Ong, Wai Kit; Reed, Jennifer L

2015-08-01

Metabolic engineering uses genetic approaches to control microbial metabolism to produce desired compounds. Computational tools can identify new biological routes to chemicals and the changes needed in host metabolism to improve chemical production. Recent computational efforts have focused on exploring what compounds can be made biologically using native, heterologous, and/or enzymes with broad specificity. Additionally, computational methods have been developed to suggest different types of genetic modifications (e.g. gene deletion/addition or up/down regulation), as well as suggest strategies meeting different criteria (e.g. high yield, high productivity, or substrate co-utilization). Strategies to improve the runtime performances have also been developed, which allow for more complex metabolic engineering strategies to be identified. Future incorporation of kinetic considerations will further improve strain design algorithms. Copyright © 2015 Elsevier Ltd. All rights reserved.

Institute for Computer Applications in Science and Engineering (ICASE)

Science.gov (United States)

1984-01-01

Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis and computer science during the period April 1, 1983 through September 30, 1983 is summarized.

High Performance Computing in Science and Engineering '15 : Transactions of the High Performance Computing Center

CERN Document Server

Kröner, Dietmar; Resch, Michael

2016-01-01

This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2015. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

High Performance Computing in Science and Engineering '17 : Transactions of the High Performance Computing Center

CERN Document Server

Kröner, Dietmar; Resch, Michael; HLRS 2017

2018-01-01

This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2017. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance.The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Computational design of rolling bearings

CERN Document Server

Nguyen-Schäfer, Hung

2016-01-01

This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

Metamodels for Computer-Based Engineering Design: Survey and Recommendations

Science.gov (United States)

Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

1997-01-01

The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

Emerging trends in neuro engineering and neural computation

CERN Document Server

Lee, Kendall; Garmestani, Hamid; Lim, Chee

2017-01-01

This book focuses on neuro-engineering and neural computing, a multi-disciplinary field of research attracting considerable attention from engineers, neuroscientists, microbiologists and material scientists. It explores a range of topics concerning the design and development of innovative neural and brain interfacing technologies, as well as novel information acquisition and processing algorithms to make sense of the acquired data. The book also highlights emerging trends and advances regarding the applications of neuro-engineering in real-world scenarios, such as neural prostheses, diagnosis of neural degenerative diseases, deep brain stimulation, biosensors, real neural network-inspired artificial neural networks (ANNs) and the predictive modeling of information flows in neuronal networks. The book is broadly divided into three main sections including: current trends in technological developments, neural computation techniques to make sense of the neural behavioral data, and application of these technologie...

Women Working in Engineering and Science

Science.gov (United States)

Luna, Bernadette; Kliss, Mark (Technical Monitor)

1998-01-01

The presentation will focus on topics of interest to young women pursuing an engineering or scientific career, such as intrinsic personality traits of most engineers, average salaries for the various types of engineers, appropriate preparation classes at the high school and undergraduate levels, gaining experience through internships, summer jobs and graduate school, skills necessary but not always included in engineering curricula (i.e., multimedia, computer skills, communication skills), the work environment, balancing family and career, and sexual harassment. Specific examples from the speaker's own experience in NASA's Space Life Sciences Program will be used to illustrate the above topics. In particular, projects from Extravehicular Activity and Protective Systems research and Regenerative Life Support research will be used as examples of real world problem-solving to enable human exploration of the solar system.

Yue Joseph Wang named Grant A. Dove Professor of Electrical and Computer Engineering

OpenAIRE

Owczarski, Mark

2009-01-01

Yue Joseph Wang, professor of electrical and computer engineering in the College of Engineering at Virginia Tech, has been named the Grant A. Dove Professor of Electrical and Computer Engineering by the Virginia Tech Board of Visitors.

Computational intelligence in automotive applications

Energy Technology Data Exchange (ETDEWEB)

Prokhorov, Danil (ed.) [Toyota Motor Engineering and Manufacturing (TEMA), Ann Arbor, MI (United States). Toyota Technical Center

2008-07-01

What is computational intelligence (CI)? Traditionally, CI is understood as a collection of methods from the fields of neural networks (NN), fuzzy logic and evolutionary computation. This edited volume is the first of its kind, suitable to automotive researchers, engineers and students. It provides a representative sample of contemporary CI activities in the area of automotive technology. The volume consists of 13 chapters, including but not limited to these topics: vehicle diagnostics and vehicle system safety, control of vehicular systems, quality control of automotive processes, driver state estimation, safety of pedestrians, intelligent vehicles. All chapters contain overviews of state of the art, and several chapters illustrate their methodologies on examples of real-world systems. About the Editor: Danil Prokhorov began his technical career in St. Petersburg, Russia, after graduating with Honors from Saint Petersburg State University of Aerospace Instrumentation in 1992 (MS in Robotics). He worked as a research engineer in St. Petersburg Institute for Informatics and Automation, one of the institutes of the Russian Academy of Sciences. He came to the US in late 1993 for Ph.D. studies. He became involved in automotive research in 1995 when he was a Summer intern at Ford Scientific Research Lab in Dearborn, MI. Upon his graduation from the EE Department of Texas Tech University, Lubbock, in 1997, he joined Ford to pursue application-driven research on neural networks and other machine learning algorithms. While at Ford, he took part in several production-bound projects including neural network based engine misfire detection. Since 2005 he is with Toyota Technical Center, Ann Arbor, MI, overseeing important mid- and long-term research projects in computational intelligence. (orig.)

Methods and experimental techniques in computer engineering

CERN Document Server

Schiaffonati, Viola

2014-01-01

Computing and science reveal a synergic relationship. On the one hand, it is widely evident that computing plays an important role in the scientific endeavor. On the other hand, the role of scientific method in computing is getting increasingly important, especially in providing ways to experimentally evaluate the properties of complex computing systems. This book critically presents these issues from a unitary conceptual and methodological perspective by addressing specific case studies at the intersection between computing and science. The book originates from, and collects the experience of, a course for PhD students in Information Engineering held at the Politecnico di Milano. Following the structure of the course, the book features contributions from some researchers who are working at the intersection between computing and science.

High-End Computing Challenges in Aerospace Design and Engineering

Science.gov (United States)

Bailey, F. Ronald

2004-01-01

High-End Computing (HEC) has had significant impact on aerospace design and engineering and is poised to make even more in the future. In this paper we describe four aerospace design and engineering challenges: Digital Flight, Launch Simulation, Rocket Fuel System and Digital Astronaut. The paper discusses modeling capabilities needed for each challenge and presents projections of future near and far-term HEC computing requirements. NASA's HEC Project Columbia is described and programming strategies presented that are necessary to achieve high real performance.

Ranking Workplace Competencies: Student and Graduate Perceptions.

Science.gov (United States)

Rainsbury, Elizabeth; Hodges, Dave; Burchell, Noel; Lay, Mark

2002-01-01

New Zealand business students and graduates made similar rankings of the five most important workplace competencies: computer literacy, customer service orientation, teamwork and cooperation, self-confidence, and willingness to learn. Graduates placed greater importance on most of the 24 competencies, resulting in a statistically significant…

One semester course in wind energy for advanced undergraduate and graduate engineering students

International Nuclear Information System (INIS)

Ghosh, K.

2006-01-01

The recent increase in energy consumption in India is resulting in high levels of greenhouse gas emissions. Attempts to harness new renewable energy sources such as wind power is creating the need for trained manpower in aerospace engineering and mechanical engineering. The course outline for a one semester course in wind energy for advanced undergraduate and graduate engineering students at the Indian Institute of Technology was presented in this paper. A history of wind energy was also presented along with the approaching global environmental crisis. International efforts and conventions to reduce greenhouse gas emissions were discussed. India's geography and relationship to wind resources were presented in terms of its latitude and geostrophic winds. The course outline also includes a section on measuring instruments (anemometers) and organization of wind data using Weibull distribution as well as the impacts of summer and monsoon winds. The aerodynamics of wind turbines including airfoils, airscrew theory, and its application to wind turbines were discussed. Rural and remote area usage of wind turbines as well as the structural design and construction of wind turbine blades using composite materials are also examined in the course. Last, the course presents a video cassette and a 16 mm film on wind energy and advises students that they are exposed to laboratory and field practices and encouraged to do practical projects. The course contains a discussion of policy issues such as reaching the common people, and industry-academia interaction. 8 refs., 10 figs

One semester course in wind energy for advanced undergraduate and graduate engineering students

Energy Technology Data Exchange (ETDEWEB)

Ghosh, K. [Indian Inst. of Technology, Kanpur (India). Aerospace Engineering Dept.

2006-07-01

The recent increase in energy consumption in India is resulting in high levels of greenhouse gas emissions. Attempts to harness new renewable energy sources such as wind power is creating the need for trained manpower in aerospace engineering and mechanical engineering. The course outline for a one semester course in wind energy for advanced undergraduate and graduate engineering students at the Indian Institute of Technology was presented in this paper. A history of wind energy was also presented along with the approaching global environmental crisis. International efforts and conventions to reduce greenhouse gas emissions were discussed. India's geography and relationship to wind resources were presented in terms of its latitude and geostrophic winds. The course outline also includes a section on measuring instruments (anemometers) and organization of wind data using Weibull distribution as well as the impacts of summer and monsoon winds. The aerodynamics of wind turbines including airfoils, airscrew theory, and its application to wind turbines were discussed. Rural and remote area usage of wind turbines as well as the structural design and construction of wind turbine blades using composite materials are also examined in the course. Last, the course presents a video cassette and a 16 mm film on wind energy and advises students that they are exposed to laboratory and field practices and encouraged to do practical projects. The course contains a discussion of policy issues such as reaching the common people, and industry-academia interaction. 8 refs., 10 figs.

A New Paradigm for Chemical Engineering?

DEFF Research Database (Denmark)

Gani, Rafiqul

evidence of this change comes from the jobs taken by graduating chemical engineering professionals in North America, Europe, and some of the Asian countries. In terms of where the graduating chemical engineers are going to work, a clear shift from the commodity chemical industry to the product oriented...... businesses has been observed. There is an increasing trend within the chemical industry to focus on products and the sustainable processes that can make them. Do these changes point to a paradigm shift in chemical engineering as a discipline? Historically, two previous paradigm shifts in chemical engineering...... corresponded to major shifts in chemical engineering as a discipline, which affected not only the education of chemical engineers, but also the development of chemical engineering as a discipline. Has the time come for a new paradigm shift that will prepare the current and future chemical engineering graduates...

Intuitive expertise in ICT graduate supervision

Directory of Open Access Journals (Sweden)

Jill Jameson

2002-12-01

Full Text Available Intuitive expertise in the application of advanced interdisciplinary facilitation is the subject of this personal reflection on the graduate supervisory style of Professor David Squires in computers in education. This single-case reflective study examines the characteristics of effective supervision observed during masters and doctoral supervision at King's College in the years 1990-9. Interdisciplinarity in ICT graduate studies particularly requires a fluency of supervisory expertise in enabling supervisees to combine multiple complex perspectives from a number of fields of knowledge. Intuitive combinatory aspects of supervision are highlighted in this reflection on the role carried out by an academic expert in facilitating student success. This is examined from a perspective incorporating affective as well as intellectual elements, informed by characteristics identified in professional sports and performing arts coaching/mentoring. Key characteristics comprising a model of intuitive expertise in ICT graduate supervision were outlined. The resultant portrait aims to complement existing literature on graduate supervision, with reference to the field of ICTI computers in education relating to student hypermedia composition.

Computer and machine vision theory, algorithms, practicalities

CERN Document Server

Davies, E R

2012-01-01

Computer and Machine Vision: Theory, Algorithms, Practicalities (previously entitled Machine Vision) clearly and systematically presents the basic methodology of computer and machine vision, covering the essential elements of the theory while emphasizing algorithmic and practical design constraints. This fully revised fourth edition has brought in more of the concepts and applications of computer vision, making it a very comprehensive and up-to-date tutorial text suitable for graduate students, researchers and R&D engineers working in this vibrant subject. Key features include: Practical examples and case studies give the 'ins and outs' of developing real-world vision systems, giving engineers the realities of implementing the principles in practice New chapters containing case studies on surveillance and driver assistance systems give practical methods on these cutting-edge applications in computer vision Necessary mathematics and essential theory are made approachable by careful explanations and well-il...

Architecture independent environment for developing engineering software on MIMD computers

Science.gov (United States)

Valimohamed, Karim A.; Lopez, L. A.

1990-01-01

Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

Labor market trends for nuclear engineers through 2005

International Nuclear Information System (INIS)

Seltzer, N.; Blair, L.M.

1996-10-01

Between 1983 and 1989, employment of nuclear engineers in the nuclear energy field increased almost 40 percent while the annual number of nuclear engineering degrees awarded decreased by almost one-fourth. There were, on average, more job openings for new graduates than there were new graduates available to fill the jobs during the 1980s. This trend reversed in the l990s as nuclear engineering employment in the nuclear energy field decreased from 11,500 in 1991 to 9,400 in 1995. During roughly the same period, the annual number of nuclear engineering degrees increased by 11 percent. As a result, from 1990 through 1995, the number of new graduate nuclear engineers available in the labor supply far exceeded the number of job openings for new graduates in the nuclear energy field. This oversupply of new graduates was particularly acute for 1993 through 1995. During 1996--1997, a relative improvement is expected in job opportunities in the nuclear energy field for new graduates; however, a large oversupply is still expected (almost twice as many graduates available for employment as there are job openings). For 1998 through 2000, some improvement is expected in the relative number of job opportunities for new graduates in the nuclear energy field. Nuclear engineering jobs in the nuclear energy field are expected to decrease only slightly (by less than 150) during this period. Also a 10--15% decrease in the annual number of degrees and available supply of new graduates is expected. Overall, an oversupply is expected (140 graduates available per 100 job openings for new graduates in the nuclear energy field), but this is still a substantial improvement over the current period. For 2001 through 2005, if enrollments and degrees continue to decline, the labor market for new graduates is expected to be approximately balanced. This assumes, however, that the number of degrees and the available supply of new graduates will decrease by 25% from 1995 levels

The employment of post graduates by NPC

International Nuclear Information System (INIS)

Furber, B.N.; Lunt, A.R.W.

1980-01-01

The Nuclear Power Company has the sole responsibility in Britain for the design, construction, and commissioning of nuclear power stations. The Company employs some 2400 people, mainly at its two principal administrative and laboratory sites at Risley, Cheshire and Whetstone, Leicester. In carrying out its responsibilities the Company utilises skills in design, project management, planning, quality control, research and development and many other facets of contemporary nuclear engineering. Accordingly it has well formed views on the employment and training of the engineer and scientists who must exhibit and manage such skills. These views are brought out in this paper with particular reference to the relevance of post graduate training to the Company's Research and Development Department. Staff with post graduate research experience are also employed on other engineering activities in the company. The relevance of their experience to non-research work they undertake is also discussed. (author)

An Examination of Computer Engineering Students' Perceptions about Asynchronous Discussion Forums

Science.gov (United States)

Ozyurt, Ozcan; Ozyurt, Hacer

2013-01-01

This study was conducted in order to reveal the usage profiles and perceptions of Asynchronous Discussion Forums (ADFs) of 126 computer engineering students from the Computer Engineering Department in a university in Turkey. By using a mixed methods research design both quantitative and qualitative data were collected and analyzed. Research…

Graduate studies on optoelectronics in Argentina: an experience

Science.gov (United States)

Fernández, Juan C.; Garea, María. T.; Isaurralde, Silvia; Perez, Liliana I.; Raffo, Carlos A.

2014-07-01

The number of graduate programs in Optoelectronics in Argentina is scarce. The current Optics and Photonics Education Directory lists only three programs. One of them was launched in 2001 in the Facultad de Ingeniería (College of Engineering), Universidad de Buenos Aires (UBA). This was the first graduate program in the field, leading to a Master Degree in Optoelectronics. This decision arose from the demand of telecommunications industries and several estate- or private-funded research institutions working with us in the fields of lasers, optics, remote sensing, etc. A great bonus was the steady work, during several decades, of research groups in the College on the development of different type of lasers and optical non destructive tests and their engineering applications. As happened in many engineering graduate programs in Argentina at that time, few non full-time students could finish their studies, which called for 800 hours of traditional lecture-recitation classes, and the Master Thesis. In recent years Argentine Education authorities downsized the Master programs to 700 hours of blended learning and we redesigned the Graduate Optoelectronic Engineering Program to meet the challenge, dividing it in two successive one year programs, the first aimed at a professional training for almost immediate insertion in the labor market (called Especialización en Ingeniería Optoelectrónica), and the second (called Maestría en Ingeniería Optoelectrónica y Fotónica) aimed at a more academic and research target to comply with the UBA standards for Master degrees. The present work is a presentation of the new program design, which has begun in the current year.

Transformative Learning Experiences of International Graduate Students from Asian Countries

Science.gov (United States)

Kumi-Yeboah, Alex; James, Waynne

2014-01-01

This article investigates the transformative learning experiences of international graduate students from Asian countries. Data collection consisted of quantitative and qualitative methods. Participants included international graduate students from Asia, in the Colleges of Arts and Sciences and Engineering. Overall, 82.3% of the participants…

Construction informatics - Issues in engineering, computer science and ontology

DEFF Research Database (Denmark)

Eir, Asger

2004-01-01

and conceptual modelling of civil engineering and design. Due to the interdisciplinary content, the first half of the study has been carried out at Department of Civil Engineering (BYG"DTU), The Technical University of Denmark; whereas the second half has been carried out at Informatics and Mathematical....... With origin in civil engineering and design issues, the study was directed towards computer science oriented theories in an attempt to introduce such theories in modelling and clarification of the domain. This strategy turned out to be a strength for the study and this thesis. However, it also discovered some...... problems in carrying out such a truly interdisciplinary Ph.D. study. Per Galle s and Dines Bjørner's common background in computer science has been essential for the success of this study. The original title of the Ph.D. project was Design and application of a civil engineering ontology. However, it became...

Design and computation of modern engineering materials

CERN Document Server

Altenbach, Holm

2014-01-01

 The idea of this monograph is to present the latest results related to design and computation of engineering materials and structures. The contributions cover the classical fields of mechanical, civil and materials engineering up to biomechanics and advanced materials processing and optimization. The materials and structures covered can be categorized into modern steels and titanium alloys, composite materials, biological and natural materials, material hybrids and modern joining technologies. Analytical modelling, numerical simulation, the application of state-of-the-art design tools and sophisticated experimental techniques are applied to characterize the performance of materials and to design and optimize structures in different fields of engineering applications.

Synthetic biology: engineering molecular computers

CERN Multimedia

CERN. Geneva

2018-01-01

Complicated systems cannot survive the rigors of a chaotic environment, without balancing mechanisms that sense, decide upon and counteract the exerted disturbances. Especially so with living organisms, forced by competition to incredible complexities, escalating also their self-controlling plight. Therefore, they compute. Can we harness biological mechanisms to create artificial computing systems? Biology offers several levels of design abstraction: molecular machines, cells, organisms... ranging from the more easily-defined to the more inherently complex. At the bottom of this stack we find the nucleic acids, RNA and DNA, with their digital structure and relatively precise interactions. They are central enablers of designing artificial biological systems, in the confluence of engineering and biology, that we call Synthetic biology. In the first part, let us follow their trail towards an overview of building computing machines with molecules -- and in the second part, take the case study of iGEM Greece 201...

Applied Mathematics, Modelling and Computational Science

CERN Document Server

Kotsireas, Ilias; Makarov, Roman; Melnik, Roderick; Shodiev, Hasan

2015-01-01

The Applied Mathematics, Modelling, and Computational Science (AMMCS) conference aims to promote interdisciplinary research and collaboration. The contributions in this volume cover the latest research in mathematical and computational sciences, modeling, and simulation as well as their applications in natural and social sciences, engineering and technology, industry, and finance. The 2013 conference, the second in a series of AMMCS meetings, was held August 26–30 and organized in cooperation with AIMS and SIAM, with support from the Fields Institute in Toronto, and Wilfrid Laurier University. There were many young scientists at AMMCS-2013, both as presenters and as organizers. This proceedings contains refereed papers contributed by the participants of the AMMCS-2013 after the conference. This volume is suitable for researchers and graduate students, mathematicians and engineers, industrialists, and anyone who would like to delve into the interdisciplinary research of applied and computational mathematics ...

Dynamics of number systems computation with arbitrary precision

CERN Document Server

Kurka, Petr

2016-01-01

This book is a source of valuable and useful information on the topics of dynamics of number systems and scientific computation with arbitrary precision. It is addressed to scholars, scientists and engineers, and graduate students. The treatment is elementary and self-contained with relevance both for theory and applications. The basic prerequisite of the book is linear algebra and matrix calculus. .

An eLearning Standard Approach for Supporting PBL in Computer Engineering

Science.gov (United States)

Garcia-Robles, R.; Diaz-del-Rio, F.; Vicente-Diaz, S.; Linares-Barranco, A.

2009-01-01

Problem-based learning (PBL) has proved to be a highly successful pedagogical model in many fields, although it is not that common in computer engineering. PBL goes beyond the typical teaching methodology by promoting student interaction. This paper presents a PBL trial applied to a course in a computer engineering degree at the University of…

Imprinting Community College Computer Science Education with Software Engineering Principles

Science.gov (United States)

Hundley, Jacqueline Holliday

Although the two-year curriculum guide includes coverage of all eight software engineering core topics, the computer science courses taught in Alabama community colleges limit student exposure to the programming, or coding, phase of the software development lifecycle and offer little experience in requirements analysis, design, testing, and maintenance. We proposed that some software engineering principles can be incorporated into the introductory-level of the computer science curriculum. Our vision is to give community college students a broader exposure to the software development lifecycle. For those students who plan to transfer to a baccalaureate program subsequent to their community college education, our vision is to prepare them sufficiently to move seamlessly into mainstream computer science and software engineering degrees. For those students who plan to move from the community college to a programming career, our vision is to equip them with the foundational knowledge and skills required by the software industry. To accomplish our goals, we developed curriculum modules for teaching seven of the software engineering knowledge areas within current computer science introductory-level courses. Each module was designed to be self-supported with suggested learning objectives, teaching outline, software tool support, teaching activities, and other material to assist the instructor in using it.

Preparing systems engineering and computing science students in disciplined methods, quantitative, and advanced statistical techniques to improve process performance

Science.gov (United States)

McCray, Wilmon Wil L., Jr.

The research was prompted by a need to conduct a study that assesses process improvement, quality management and analytical techniques taught to students in U.S. colleges and universities undergraduate and graduate systems engineering and the computing science discipline (e.g., software engineering, computer science, and information technology) degree programs during their academic training that can be applied to quantitatively manage processes for performance. Everyone involved in executing repeatable processes in the software and systems development lifecycle processes needs to become familiar with the concepts of quantitative management, statistical thinking, process improvement methods and how they relate to process-performance. Organizations are starting to embrace the de facto Software Engineering Institute (SEI) Capability Maturity Model Integration (CMMI RTM) Models as process improvement frameworks to improve business processes performance. High maturity process areas in the CMMI model imply the use of analytical, statistical, quantitative management techniques, and process performance modeling to identify and eliminate sources of variation, continually improve process-performance; reduce cost and predict future outcomes. The research study identifies and provides a detail discussion of the gap analysis findings of process improvement and quantitative analysis techniques taught in U.S. universities systems engineering and computing science degree programs, gaps that exist in the literature, and a comparison analysis which identifies the gaps that exist between the SEI's "healthy ingredients " of a process performance model and courses taught in U.S. universities degree program. The research also heightens awareness that academicians have conducted little research on applicable statistics and quantitative techniques that can be used to demonstrate high maturity as implied in the CMMI models. The research also includes a Monte Carlo simulation optimization

A computational study of free-piston diesel engine combustion

Energy Technology Data Exchange (ETDEWEB)

Mikalsen, R.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, Newcastle University, Devonshire Building, Newcastle upon Tyne, NE1 7RU (United Kingdom)

2009-07-15

This paper investigates the in-cylinder gas motion, combustion process and nitrogen oxide formation in a free-piston diesel engine and compares the results to those of a conventional engine, using a computational fluid dynamics engine model. Enhanced radial gas flow (squish and reverse squish) around top dead centre is found for the free-piston engine compared to a conventional engine, however it is found that this has only minor influence on the combustion process. A higher heat release rate from the pre-mixed combustion phase due to an increased ignition delay was found, along with potential reductions in nitrogen oxides emissions formation for the free-piston engine. (author)

Applied chemical engineering thermodynamics

CERN Document Server

Tassios, Dimitrios P

1993-01-01

Applied Chemical Engineering Thermodynamics provides the undergraduate and graduate student of chemical engineering with the basic knowledge, the methodology and the references he needs to apply it in industrial practice. Thus, in addition to the classical topics of the laws of thermodynamics,pure component and mixture thermodynamic properties as well as phase and chemical equilibria the reader will find: - history of thermodynamics - energy conservation - internmolecular forces and molecular thermodynamics - cubic equations of state - statistical mechanics. A great number of calculated problems with solutions and an appendix with numerous tables of numbers of practical importance are extremely helpful for applied calculations. The computer programs on the included disk help the student to become familiar with the typical methods used in industry for volumetric and vapor-liquid equilibria calculations.

Graduates', University Lecturers' and Employers' Perceptions towards Employability Skills

Science.gov (United States)

Wickramasinghe, Vathsala; Perera, Lasantha

2010-01-01

Purpose: The purpose of this study is to explore employability skills that employers, university lecturers and graduates value to bring to the workplace, when graduates are applying for entry-level graduate jobs in the field of computer science in Sri Lanka. Design/methodology/approach: A total of three samples were selected for this exploratory…

Integrating computer programs for engineering analysis and design

Science.gov (United States)

Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

1983-01-01

The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

Computer aided systems human engineering: A hypermedia tool

Science.gov (United States)

Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

1992-01-01

The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

Computer-aided dental prostheses construction using reverse engineering.

Science.gov (United States)

Solaberrieta, E; Minguez, R; Barrenetxea, L; Sierra, E; Etxaniz, O

2014-01-01

The implementation of computer-aided design/computer-aided manufacturing (CAD/CAM) systems with virtual articulators, which take into account the kinematics, constitutes a breakthrough in the construction of customised dental prostheses. This paper presents a multidisciplinary protocol involving CAM techniques to produce dental prostheses. This protocol includes a step-by-step procedure using innovative reverse engineering technologies to transform completely virtual design processes into customised prostheses. A special emphasis is placed on a novel method that permits a virtual location of the models. The complete workflow includes the optical scanning of the patient, the use of reverse engineering software and, if necessary, the use of rapid prototyping to produce CAD temporary prostheses.

Use of computer simulations for the early introduction of nuclear engineering concepts

International Nuclear Information System (INIS)

Ougouag, A.M.; Zerguini, T.H.

1985-01-01

A sophomore level nuclear engineering (NE) course is being introduced at the University of Illinois. Via computer simulations, this course presents materials covering the most important aspects of the field. It is noted that computer simulations in nuclear engineering are cheaper and safer than experiments yet they provide an effective teaching tool for the early introduction of advanced concepts. The new course material can be used as a tutorial and for remedial learning. The use of computer simulation motivates learning since students associate computer activities with games. Such a course can help in the dissemination of the proper information to students from different fields, including liberal arts, and eventually increase undergraduate student enrollment in nuclear engineering

Engineering education in 21st century

Science.gov (United States)

Alam, Firoz; Sarkar, Rashid; La Brooy, Roger; Chowdhury, Harun

2016-07-01

The internationalization of engineering curricula and engineering practices has begun in Europe, Anglosphere (English speaking) nations and Asian emerging economies through the Bologna Process and International Engineering Alliance (Washington Accord). Both the Bologna Process and the Washington Accord have introduced standardized outcome based engineering competencies and frameworks for the attainment of these competencies by restructuring existing and undertaking some new measures for an intelligent adaptation of the engineering curriculum and pedagogy. Thus graduates with such standardized outcome based curriculum can move freely as professional engineers with mutual recognition within member nations. Despite having similar or near similar curriculum, Bangladeshi engineering graduates currently cannot get mutual recognition in nations of Washington Accord and the Bologna Process due to the non-compliance of outcome based curriculum and pedagogy. This paper emphasizes the steps that are required to undertake by the engineering educational institutions and the professional body in Bangladesh to make the engineering competencies, curriculum and pedagogy compliant to the global engineering alliance. Achieving such compliance will usher in a new era for the global mobility and global engagement by Bangladesh trained engineering graduates.

Computer tools for systems engineering at LaRC

Science.gov (United States)

Walters, J. Milam

1994-01-01

The Systems Engineering Office (SEO) has been established to provide life cycle systems engineering support to Langley research Center projects. over the last two years, the computing market has been reviewed for tools which could enhance the effectiveness and efficiency of activities directed towards this mission. A group of interrelated applications have been procured, or are under development including a requirements management tool, a system design and simulation tool, and project and engineering data base. This paper will review the current configuration of these tools and provide information on future milestones and directions.

International Conference on Artificial Intelligence and Evolutionary Computations in Engineering Systems

CERN Document Server

Bhaskar, M; Panigrahi, Bijaya; Das, Swagatam

2016-01-01

The book is a collection of high-quality peer-reviewed research papers presented in the first International Conference on International Conference on Artificial Intelligence and Evolutionary Computations in Engineering Systems (ICAIECES -2015) held at Velammal Engineering College (VEC), Chennai, India during 22 – 23 April 2015. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academic and industry present their original work and exchange ideas, information, techniques and applications in the field of Communication, Computing and Power Technologies.

Application engineering for process computer systems

International Nuclear Information System (INIS)

Mueller, K.

1975-01-01

The variety of tasks for process computers in nuclear power stations necessitates the centralization of all production stages from the planning stage to the delivery of the finished process computer system (PRA) to the user. This so-called 'application engineering' comprises all of the activities connected with the application of the PRA: a) establishment of the PRA concept, b) project counselling, c) handling of offers, d) handling of orders, e) internal handling of orders, f) technical counselling, g) establishing of parameters, h) monitoring deadlines, i) training of customers, j) compiling an operation manual. (orig./AK) [de

BS degree in nuclear engineering or a nuclear option

International Nuclear Information System (INIS)

Williams on, T.G.

1988-01-01

Many nuclear engineering educators are concerned about the health of nuclear engineering academic departments. As part of a review of the BS nuclear engineering degree program at the University of Virginia, the authors surveyed several local utilities with operating nuclear plants about their needs for nuclear engineering graduates. The perception of many of the utility executives about a nuclear engineering degree and about a nuclear option in another engineering curriculum does not agree with the way the authors view these two degrees. The responses to two of the survey questions were of particular interest: (1) does your company have a preference between nuclear engineering graduates and graduates in other fields with a nuclear option? (2) what do you consider to be a minimum level of education in nuclear engineering for a nuclear option in mechanical engineering? All of the four utilities that were surveyed stated a preference for mechanical or electrical engineers with a nuclear option, although two indicated that there are certain jobs for which a nuclear engineering graduate is desired

Computer-Aided System of Virtual Testing of Gas Turbine Engines

Directory of Open Access Journals (Sweden)

Rybakov Viktor N.

2016-01-01

Full Text Available The article describes the concept of a virtual lab that includes subsystem of gas turbine engine simulation, subsystem of experiment planning, subsystem of measurement errors simulation, subsystem of simulator identification and others. The basis for virtual lab development is the computer-aided system of thermogasdynamic research and analysis “ASTRA”. The features of gas turbine engine transient modes simulator are described. The principal difference between the simulators of transient and stationary modes of gas turbine engines is that the energy balance of the compressor and turbine becomes not applicable. The computer-aided system of virtual gas turbine engine testing was created using the developed transient modes simulator. This system solves the tasks of operational (throttling, speed, climatic, altitude characteristics calculation, analysis of transient dynamics and selection of optimal control laws. Besides, the system of virtual gas turbine engine testing is a clear demonstration of gas turbine engine working process and the regularities of engine elements collaboration. The interface of the system of virtual gas turbine engine testing is described in the article and some screenshots of the interface elements are provided. The developed system of virtual gas turbine engine testing provides means for reducing the laboriousness of gas turbine engines testing. Besides, the implementation of this system in the learning process allows the diversification of lab works and therefore improve the quality of training.

Electronic digital computers their use in science and engineering

CERN Document Server

Alt, Franz L

1958-01-01

Electronic Digital Computers: Their Use in Science and Engineering describes the principles underlying computer design and operation. This book describes the various applications of computers, the stages involved in using them, and their limitations. The machine is composed of the hardware which is run by a program. This text describes the use of magnetic drum for storage of data and some computing. The functions and components of the computer include automatic control, memory, input of instructions by using punched cards, and output from resulting information. Computers operate by using numbe

Computational fluid mechanics and heat transfer

CERN Document Server

Pletcher, Richard H; Anderson, Dale

2012-01-01

""I have always considered this book the best gift from one generation to the next in computational fluid dynamics. I earnestly recommend this book to graduate students and practicing engineers for the pleasure of learning and a handy reference. The description of the basic concepts and fundamentals is thorough and is crystal clear for understanding. And since 1984, two newer editions have kept abreast to the new, relevant, and fully verified advancements in CFD.""-Joseph J.S. Shang, Wright State University""Computational Fluid Mechanics and Heat Transfer is very well written to be used as a t

Numerical modeling in materials science and engineering

CERN Document Server

Rappaz, Michel; Deville, Michel

2003-01-01

This book introduces the concepts and methodologies related to the modelling of the complex phenomena occurring in materials processing. After a short reminder of conservation laws and constitutive relationships, the authors introduce the main numerical methods: finite differences, finite volumes and finite elements. These techniques are developed in three main chapters of the book that tackle more specific problems: phase transformation, solid mechanics and fluid flow. The two last chapters treat inverse methods to obtain the boundary conditions or the material properties and stochastic methods for microstructural simulation. This book is intended for undergraduate and graduate students in materials science and engineering, mechanical engineering and physics and for engineering professionals or researchers who want to get acquainted with numerical simulation to model and compute materials processing.

Multiscale computer modeling in biomechanics and biomedical engineering

CERN Document Server

2013-01-01

This book reviews the state-of-the-art in multiscale computer modeling, in terms of both accomplishments and challenges. The information in the book is particularly useful for biomedical engineers, medical physicists and researchers in systems biology, mathematical biology, micro-biomechanics and biomaterials who are interested in how to bridge between traditional biomedical engineering work at the organ and tissue scales, and the newer arenas of cellular and molecular bioengineering.

Rotary engine performance computer program (RCEMAP and RCEMAPPC): User's guide

Science.gov (United States)

Bartrand, Timothy A.; Willis, Edward A.

1993-01-01

This report is a user's guide for a computer code that simulates the performance of several rotary combustion engine configurations. It is intended to assist prospective users in getting started with RCEMAP and/or RCEMAPPC. RCEMAP (Rotary Combustion Engine performance MAP generating code) is the mainframe version, while RCEMAPPC is a simplified subset designed for the personal computer, or PC, environment. Both versions are based on an open, zero-dimensional combustion system model for the prediction of instantaneous pressures, temperature, chemical composition and other in-chamber thermodynamic properties. Both versions predict overall engine performance and thermal characteristics, including bmep, bsfc, exhaust gas temperature, average material temperatures, and turbocharger operating conditions. Required inputs include engine geometry, materials, constants for use in the combustion heat release model, and turbomachinery maps. Illustrative examples and sample input files for both versions are included.

GRADUATE AND PROFESSIONAL EDUCATION, AN ANNOTATED BIBLIOGRAPHY.

Science.gov (United States)

HEISS, ANN M.; AND OTHERS

THIS ANNOTATED BIBLIOGRAPHY CONTAINS REFERENCES TO GENERAL GRADUATE EDUCATION AND TO EDUCATION FOR THE FOLLOWING PROFESSIONAL FIELDS--ARCHITECTURE, BUSINESS, CLINICAL PSYCHOLOGY, DENTISTRY, ENGINEERING, LAW, LIBRARY SCIENCE, MEDICINE, NURSING, SOCIAL WORK, TEACHING, AND THEOLOGY. (HW)

The effects of computer-aided design software on engineering students' spatial visualisation skills

Science.gov (United States)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

Combustion engine diagnosis model-based condition monitoring of gasoline and diesel engines and their components

CERN Document Server

Isermann, Rolf

2017-01-01

This book offers first a short introduction to advanced supervision, fault detection and diagnosis methods. It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel supply, fuel injection, combustion process, turbocharger, exhaust system and exhaust gas aftertreatment. Additionally, model-based fault diagnosis of electrical motors, electric, pneumatic and hydraulic actuators and fault-tolerant systems is treated. In general series production sensors are used. It includes abundant experimental results showing the detection and diagnosis quality of implemented faults. Written for automotive engineers in practice, it is also of interest to graduate students of mechanical and electrical engineering and computer science. The Content Introduction.- I SUPERVISION, FAULT DETECTION AND DIAGNOSIS METHODS.- Supervision, Fault-Detection and Fault-Diagnosis Methods - a short Introduction.- II DIAGNOSIS OF INTERNAL COMBUST...

Applied engineering fundamentals: The transition from novice to engineering manager

International Nuclear Information System (INIS)

Murawski, M.N.; Tomchin, E.M.

1992-01-01

This paper describes the development and implementation of Applied Engineering Fundamentals, a course designed for newly graduated engineers and scientists serving as technical interns within the US Department of Energy (DOE). As specialists with varying undergraduate and graduate degrees, interns need further training to prepare them for the multidisciplinary environments they will encounter as they become engineering managers. This course is designed to build on individuals strengths in diverse engineering and scientific disciplines, provide instruction in less familiar disciplines, and develop skills in integrating multiple disciplines to solve real-world problems related to nuclear facilities. The course balances systems thinking with state-of-the-art approaches to curriculum development to provide training in technical content and to foster development of professional skills

[Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

Science.gov (United States)

Wei, Xuelei; Dong, Fuhui

2011-12-01

To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

The influence of participation in extracurricular activities to the employability of Industrial Engineering graduates of one Private University in the Philippines

Directory of Open Access Journals (Sweden)

Charlene Joy E. Chua

2017-05-01

Full Text Available Filipinos have been regarding education as the leading avenue of success. Having the system patterned from the American Education structure, education in the country provides basic learning needs and a foundation on which successive learning can be based on. Aside from traditional learning inside the classroom, extracurricular activities (ECAs are also provided for students, which basically have the same goal as that of courses in a curriculum. These activities however, let the students have experiences not included in formal education. Moreover, ECAs are being promoted in some college institutions considering that it benefits students in ways that would prepare them for their future. Certain companies focus on investing on leadership development of their employees to make them globally competitive. This paper focused on determining the degree or extent of influence of ECAs to the employability of the University of Santo Tomas (UST Industrial Engineering graduates of Batches 2013, 2014, and 2015. A survey was administered to 43 sampled graduates. Logistic regression was used in determining the influence of participation in ECAs to the employability of the graduates. Correlational analysis showed that there exists a significant relationship between and among independent variables of number of jobs, number of initial interview, level of participation and soft skills developed through ECAs. Meanwhile, Paired Sample Means Test exhibited that at 95% level of significance, there exists no relationship between the soft skills possessed by the graduates and as expected by the company with which they are employed. Recommendations were provided to enhance the activities offered in UST towards increasing employability rate of graduate students.

Graduate education in Canada and China: What enrolment data tells us

Directory of Open Access Journals (Sweden)

Tony DiPetta

2010-05-01

Full Text Available China’s emergence as a global economic and political power is in part due to the country’s renewed involvement with, and commitment to, graduate higher education (Harris, 2005. Graduate education in China is viewed as the means of producing the essential scientists, engineers and skilled workforce needed to sustain the country’s rapid industrial growth and economic development. But how does China’s graduate education system compare with North American graduate higher education and what can each learn from the other? This paper examines the trends and patterns in Master’s level graduate education programs in China and Canada based on enrolment data gathered from 1999 to 2005. Initial comparisons of the data find that Master’s level enrolments in China are growing faster than in Canada; enrolment pattern distributions for both countries are unbalanced geographically and from a disciplinary perspective the highest number of Master’s level enrolments in Canada were in the business and management disciplines while in China the greatest Master’s level enrolments were in engineering. The comparisons provided by this study help identify some of the trends and challenges of graduate education at both the national and the regional levels of both countries.

Admissions - Graduate Students | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Proceedings of the 2011 International Conference on Informatics, Cybernetics, and Computer Engineering

CERN Document Server

2012-01-01

This volume includes a set of selected papers extended and revised from the International Conference on Informatics, Cybernetics, and Computer Engineering. A computer network is a collection of computers and devices interconnected by communications channels that facilitate communications and allows sharing of resources and information among interconnected devices. Networks may be classified according to a wide variety of characteristics such as medium used to transport the data, communications protocol used, scale, topology, organizational scope, etc. Electronics engineering is an engineering discipline where non-linear and active electrical components such as electron tubes, and semiconductor devices, especially transistors, diodes and integrated circuits, are utilized to design electronic circuits, devices and systems, typically also including passive electrical components and based on printed circuit boards. ICCE 2011 Volume 3 is to provide a forum for researchers, educators, engineers, and government offi...

Innovation of education for the development of key competencies of university graduates

Directory of Open Access Journals (Sweden)

Struková Zuzana

2017-01-01

Full Text Available Competency-based education is a new trend in the process of teaching to support and develop the com­petencies of graduates. This challenge of the European Union aimed at changes in learning processes contrib­utes to improvement in the educational qualifications of the population. Recently, in Europe and Slovakia, several research studies aimed at key competencies of graduates have been conducted. This paper provides the results of the study aimed at identification of key competencies of graduates of the study program Construction Technology and Management. A proposal for innovations in learning forms is presented as an output of the national project “Universities as Engines of Knowledge Society Development”. The innovations will influence the development of profes­sion-specific and transferable competencies of graduates of the aforementioned study program at the Faculty of Civil Engineering in Technical University of Košice, Slovakia.

Vascular tissue engineering by computer-aided laser micromachining.

Science.gov (United States)

Doraiswamy, Anand; Narayan, Roger J

2010-04-28

Many conventional technologies for fabricating tissue engineering scaffolds are not suitable for fabricating scaffolds with patient-specific attributes. For example, many conventional technologies for fabricating tissue engineering scaffolds do not provide control over overall scaffold geometry or over cell position within the scaffold. In this study, the use of computer-aided laser micromachining to create scaffolds for vascular tissue networks was investigated. Computer-aided laser micromachining was used to construct patterned surfaces in agarose or in silicon, which were used for differential adherence and growth of cells into vascular tissue networks. Concentric three-ring structures were fabricated on agarose hydrogel substrates, in which the inner ring contained human aortic endothelial cells, the middle ring contained HA587 human elastin and the outer ring contained human aortic vascular smooth muscle cells. Basement membrane matrix containing vascular endothelial growth factor and heparin was to promote proliferation of human aortic endothelial cells within the vascular tissue networks. Computer-aided laser micromachining provides a unique approach to fabricate small-diameter blood vessels for bypass surgery as well as other artificial tissues with complex geometries.

Space civil engineering - A new discipline

Science.gov (United States)

Sadeh, Willy Z.; Criswell, Marvin E.

1991-01-01

Space Civil Engineering is an emerging engineering discipline that focuses on extending and expanding the Civil Engineering know-how and practice to the development and maintenance of infrastructure on celestial bodies. Space Civil Engineering is presently being developed as a new discipline within the Department of Civil Engineering at Colorado State University under a recently established NASA Space Grant College Program. Academic programs geared toward creating Space Civil Engineering Options at both undergraduate and graduate levels are being formulated. Basic ideas and concepts of the curriculum in the Space Civil Engineering Option at both undergraduate and graduate levels are presented. The role of Space Civil Engineering in the Space Program is discussed.

Variational analysis and aerospace engineering mathematical challenges for the aerospace of the future

CERN Document Server

Mohammadi, Bijan; Pironneau, Olivier; Cipolla, Vittorio

2016-01-01

This book presents papers surrounding the extensive discussions that took place from the ‘Variational Analysis and Aerospace Engineering’ workshop held at the Ettore Majorana Foundation and Centre for Scientific Culture in 2015. Contributions to this volume focus on advanced mathematical methods in aerospace engineering and industrial engineering such as computational fluid dynamics methods, optimization methods in aerodynamics, optimum controls, dynamic systems, the theory of structures, space missions, flight mechanics, control theory, algebraic geometry for CAD applications, and variational methods and applications. Advanced graduate students, researchers, and professionals in mathematics and engineering will find this volume useful as it illustrates current collaborative research projects in applied mathematics and aerospace engineering.

The Grad Cohort Workshop: Evaluating an Intervention to Retain Women Graduate Students in Computing.

Science.gov (United States)

Stout, Jane G; Tamer, Burçin; Wright, Heather M; Clarke, Lori A; Dwarkadas, Sandhya; Howard, Ayanna M

2016-01-01

Women engaged in computing career tracks are vastly outnumbered by men and often must contend with negative stereotypes about their innate technical aptitude. Research suggests women's marginalized presence in computing may result in women psychologically disengaging, and ultimately dropping out, perpetuating women's underrepresentation in computing. To combat this vicious cycle, the Computing Research Association's Committee on the Status of Women in Computing Research (CRA-W) runs a multi-day mentorship workshop for women graduate students called Grad Cohort, which consists of a speaker series and networking opportunities. We studied the long-term impact of Grad Cohort on women Ph.D. students' (a) dedication to becoming well-known in one's field, and giving back to the community ( professional goals ), (b) the degree to which one feels computing is an important element of "who they are" ( computing identity) , and (c) beliefs that computing skills are innate ( entity beliefs ). Of note, entity beliefs are known to be demoralizing and can lead to disengagement from academic endeavors. We compared a propensity score matched sample of women and men Ph.D. students in computing programs who had never participated in Grad Cohort to a sample of past Grad Cohort participants. Grad Cohort participants reported interest in becoming well-known in their field to a greater degree than women non-participants, and to an equivalent degree as men. Also, Grad Cohort participants reported stronger interest in giving back to the community than their peers. Further, whereas women non-participants identified with computing to a lesser degree than men and held stronger entity beliefs than men, Grad Cohort participants' computing identity and entity beliefs were equivalent to men. Importantly, stronger entity beliefs predicted a weaker computing identity among students, with the exception of Grad Cohort participants. This latter finding suggests Grad Cohort may shield students

Concurrent engineering: effective deployment strategies

Directory of Open Access Journals (Sweden)

Unny Menon

1996-12-01

Full Text Available This paper provides a comprehensive insight into current trends and developments in Concurrent Engineering for integrated development of products and processes with the goal of completing the entire cycle in a shorter time, at lower overall cost and with fewer engineering design changes after product release. The evolution and definition of Concurrent Engineering are addressed first, followed by a concise review of the following elements of the concurrent engineering approach to product development: Concept Development: The Front-End Process, identifying Customer Needs and Quality Function Deployment, Establishing Product Specifications, Concept Selection, Product Architecture, Design for Manufacturing, Effective Rapid Prototyping, and The Economics of Product Development. An outline of a computer-based tutorial developed by the authors and other graduate students funded by NASA ( accessible via the world-wide-web . is provided in this paper. A brief discussion of teamwork for successful concurrent engineering is included, t'ase histories of concurrent engineering implementation at North American and European companies are outlined with references to textbooks authored by Professor Menon and other writers. A comprehensive bibliography on concurrent engineering is included in the paper.

US Nuclear Engineering Education: Status and prospects

International Nuclear Information System (INIS)

1990-01-01

This study, conducted under the auspices of the Energy Engineering Board of the National Research Council, examines the status of and outlook for nuclear engineering education in the United States. The study, as described in this report resulted from a widely felt concern about the downward trends in student enrollments in nuclear engineering, in both graduate and undergraduate programs. Concerns have also been expressed about the declining number of US university nuclear engineering departments and programs, the ageing of their faculties, the appropriateness of their curricula and research funding for industry and government needs, the availability of scholarships and research funding, and the increasing ratio of foreign to US graduate students. A fundamental issue is whether the supply of nuclear engineering graduates will be adequate for the future. Although such issues are more general, pertaining to all areas of US science and engineering education, they are especially acute for nuclear engineering education. 30 refs., 24 figs., 49 tabs

US nuclear engineering education: Status and prospects

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

This study, conducted under the auspices of the Energy Engineering Board of the National Research Council, examines the status of and outlook for nuclear engineering education in the United States. The study resulted from a widely felt concern about the downward trends in student enrollments in nuclear engineering, in both graduate and undergraduate programs. Concerns have also been expressed about the declining number of US university nuclear engineering departments and programs, the aging of their faculties, the appropriateness of their curricula and research funding for industry and government needs, the availability of scholarships and research funding, and the increasing ratio of foreign to US graduate students. A fundamental issue is whether the supply of nuclear engineering graduates will be adequate for the future. Although such issues are more general, pertaining to all areas of US science and engineering education, they are especially acute for nuclear engineering education. 30 refs., 12 figs., 20 tabs.

Iowa State University's undergraduate minor, online graduate certificate and resource center in NDE

Science.gov (United States)

Bowler, Nicola; Larson, Brian F.; Gray, Joseph N.

2014-02-01

Nondestructive evaluation is a `niche' subject that is not yet offered as an undergraduate or graduate major in the United States. The undergraduate minor in NDE offered within the College of Engineering at Iowa State University (ISU) provides a unique opportunity for undergraduate aspiring engineers to obtain a qualification in the multi-disciplinary subject of NDE. The minor requires 16 credits of course work within which a core course and laboratory in NDE are compulsory. The industrial sponsors of Iowa State's Center for Nondestructive Evaluation, and others, strongly support the NDE minor and actively recruit students from this pool. Since 2007 the program has graduated 10 students per year and enrollment is rising. In 2011, ISU's College of Engineering established an online graduate certificate in NDE, accessible not only to campus-based students but also to practicing engineers via the web. The certificate teaches the fundamentals of three major NDE techniques; eddy-current, ultrasonic and X-ray methods. This paper describes the structure of these programs and plans for development of an online, coursework-only, Master of Engineering in NDE and thesis-based Master of Science degrees in NDE.

Navigating graduate school and beyond: A career guide for graduate students and a must read for every advisor

Science.gov (United States)

Schultz, Colin

2012-05-01

Beginning his scientific career as an engineering student at PSG College of Technology, in Coimbatore, India, Sundar A. Christopher has negotiated and navigated the higher-education system to become the chairman of the Department of Atmospheric Sciences at the University of Alabama in Huntsville. Drawing on his own experiences and on insights gleaned from the students who have passed through his graduate-level professional development course, Christopher takes a lighthearted look at peer review, proposal writing, managing budgets, and making the most of conferences in the AGU bookNavigating Graduate School and Beyond: A Career Guide for Graduate Students and a Must Read for Every Advisor. In this interview, Eos speaks to Christopher about overcoming the bureaucratic, logistical, and personal hurdles that too often lead students to disillusionment and conflict.

The 3d International Workshop on Computational Electronics

Science.gov (United States)

Goodnick, Stephen M.

1994-09-01

The Third International Workshop on Computational Electronics (IWCE) was held at the Benson Hotel in downtown Portland, Oregon, on May 18, 19, and 20, 1994. The workshop was devoted to a broad range of topics in computational electronics related to the simulation of electronic transport in semiconductors and semiconductor devices, particularly those which use large computational resources. The workshop was supported by the National Science Foundation (NSF), the Office of Naval Research and the Army Research Office, as well as local support from the Oregon Joint Graduate Schools of Engineering and the Oregon Center for Advanced Technology Education. There were over 100 participants in the Portland workshop, of which more than one quarter represented research groups outside of the United States from Austria, Canada, France, Germany, Italy, Japan, Switzerland, and the United Kingdom. There were a total 81 papers presented at the workshop, 9 invited talks, 26 oral presentations and 46 poster presentations. The emphasis of the contributions reflected the interdisciplinary nature of computational electronics with researchers from the Chemistry, Computer Science, Mathematics, Engineering, and Physics communities participating in the workshop.

Numerical Methods for Stochastic Computations A Spectral Method Approach

CERN Document Server

Xiu, Dongbin

2010-01-01

The first graduate-level textbook to focus on fundamental aspects of numerical methods for stochastic computations, this book describes the class of numerical methods based on generalized polynomial chaos (gPC). These fast, efficient, and accurate methods are an extension of the classical spectral methods of high-dimensional random spaces. Designed to simulate complex systems subject to random inputs, these methods are widely used in many areas of computer science and engineering. The book introduces polynomial approximation theory and probability theory; describes the basic theory of gPC meth

International Conference on Soft Computing Techniques and Engineering Application

CERN Document Server

Li, Xiaolong

2014-01-01

The main objective of ICSCTEA 2013 is to provide a platform for researchers, engineers and academicians from all over the world to present their research results and development activities in soft computing techniques and engineering application. This conference provides opportunities for them to exchange new ideas and application experiences face to face, to establish business or research relations and to find global partners for future collaboration.

Success in Undergraduate Engineering Programs: A Comparative Analysis by Race and Gender

Science.gov (United States)

Lord, Susan

2010-03-01

Interest in increasing the number of engineering graduates in the United States and promoting gender equality and diversification of the profession has encouraged considerable research on women and minorities in engineering programs. Drawing on a framework of intersectionality theory, this work recognizes that women of different ethnic backgrounds warrant disaggregated analysis because they do not necessarily share a common experience in engineering education. Using a longitudinal, comprehensive data set of more than 79,000 students who matriculated in engineering at nine universities in the Southeastern United States, this research examines how the six-year graduation rates of engineering students vary by disaggregated combinations of gender and race/ethnicity. Contrary to the popular opinion that women drop out of engineering at higher rates, our results show that Asian, Black, Hispanic, Native American, and White women who matriculate in engineering are as likely as men to graduate in engineering in six years. In fact, Asian, Black, Hispanic, and Native American women engineering matriculants graduate at higher rates than men and there is a small difference for white students. 54 percent of White women engineering matriculants graduate in six-years compared with 53 percent of white men. For male and female engineering matriculants of all races, the most likely destination six years after entering college is graduation within engineering. This work underscores the importance of research disaggregated by race and gender and points to the critical need for more recruitment of women into engineering as the low representation of women in engineering education is primarily a reflection of their low representation at matriculation.

Evolutionary computing in Nuclear Engineering Institute/CNEN-Brazil

International Nuclear Information System (INIS)

Pereira, Claudio M.N.A.; Lapa, Celso M.F.; Lapa, Nelbia da Silva; Mol, Antonio C.

2000-01-01

This paper aims to discuss the importance of evolutionary computation (CE) for nuclear engineering and the development of this area in the Instituto de Engenharia Nuclear (IEN) at the last years. Are describe, briefly, the applications realized in this institute by the technical group of CE. For example: nuclear reactor core design optimization, preventive maintenance scheduling optimizing and nuclear reactor transient identifications. It is also shown a novel computational tool to implementation of genetic algorithm that was development in this institute and applied in those works. Some results were presents and the gains obtained with the evolutionary computation were discussing. (author)

Science and Engineering of the Environment of Los Angeles: A GK-12 Experiment at Developing Science Communications Skills in UCLA's Graduate Program

Science.gov (United States)

Moldwin, M. B.; Hogue, T. S.; Nonacs, P.; Shope, R. E.; Daniel, J.

2008-12-01

Many science and research skills are taught by osmosis in graduate programs with the expectation that students will develop good communication skills (speaking, writing, and networking) by observing others, attending meetings, and self reflection. A new National Science Foundation Graduate Teaching Fellows in K- 12 Education (GK-12; http://ehrweb.aaas.org/gk12new/) program at UCLA (SEE-LA; http://measure.igpp.ucla.edu/GK12-SEE-LA/overview.html ) attempts to make the development of good communication skills an explicit part of the graduate program of science and engineering students. SEE-LA places the graduate fellows in two pairs of middle and high schools within Los Angeles to act as scientists-in- residence. They are partnered with two master science teachers and spend two-days per week in the classroom. They are not student teachers, or teacher aides, but scientists who contribute their content expertise, excitement and experience with research, and new ideas for classroom activities and lessons that incorporate inquiry science. During the one-year fellowship, the graduate students also attend a year-long Preparing Future Faculty seminar that discusses many skills needed as they begin their academic or research careers. Students are also required to include a brief (two-page) summary of their research that their middle or high school students would be able to understand as part of their published thesis. Having students actively thinking about and communicating their science to a pre-college audience provides important science communication training and helps contribute to science education. University and local pre- college school partnerships provide an excellent opportunity to support the development of graduate student communication skills while also contributing significantly to the dissemination of sound science to K-12 teachers and students.

Activities of the Institute for Computer Applications in Science and Engineering

Science.gov (United States)

1985-01-01

Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis, and computer science during the period April 1, 1985 through October 2, 1985 is summarized.

Photonics education development for electrical engineering students

Science.gov (United States)

Cao, Yang; Luo, Yuan; Liu, Yu; Hu, ZhangFang; Cai, Xuemei

2017-08-01

We describe the contents of an advanced undergraduate course on photonics at School of Electrical Engineering, Chongqing University of Posts and Telecommunications. The main goal of the course is to equip the student with the necessary theoretical and practical knowledge to participate in photonics-related industry and further graduate level study and research if they choose. The prerequisites include college-level physics and higher mathematics which a general engineering student has already had in his/her first and second year college study. Although applications of photonics are ubiquitous such as telecommunications, photonic computing, spectroscopy, military technology, and biophotonics etc. Telecommunication information system application is more emphasized in our course considering about the potential job chances for our students.

The University of Michigan's Computer-Aided Engineering Network.

Science.gov (United States)

Atkins, D. E.; Olsen, Leslie A.

1986-01-01

Presents an overview of the Computer-Aided Engineering Network (CAEN) of the University of Michigan. Describes its arrangement of workstations, communication networks, and servers. Outlines the factors considered in hardware and software decision making. Reviews the program's impact on students. (ML)

The classification and evaluation of Computer-Aided Software Engineering tools

OpenAIRE

Manley, Gary W.

1990-01-01

Approved for public release; distribution unlimited. The use of Computer-Aided Software Engineering (CASE) tools has been viewed as a remedy for the software development crisis by achieving improved productivity and system quality via the automation of all or part of the software engineering process. The proliferation and tremendous variety of tools available have stretched the understanding of experienced practitioners and has had a profound impact on the software engineering process itse...

High Performance Computing in Science and Engineering '16 : Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2016

CERN Document Server

Kröner, Dietmar; Resch, Michael

2016-01-01

This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2016. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Graduate Education in a Small Business Environment

Science.gov (United States)

Bering, E. A., III; Longmier, B.; Giambusso, M.

2015-12-01

This paper reports on the issues that confront a professor when supervising graduate students and postdocs whose research work is done on site at a small business. The advantages include relative freedom from having to write proposals; the excitement of working on topics that have clear, direct uses; more extensive engineering support than many students get; and hands on day to day mentoring from the rest of the team. Students get direct instruction in technology transfer and small business processes. The disadvantages include isolation from the rest of the students in your Department and campus life, physical isolation from resources such as the seminar program, library, health center, and other student services. In addition, students who need "introduction to research" practicum instruction in electronics and computer skills will not do well. Finally, care must be taken to avoid including proprietary data in the core argument of the work.

Interdisciplinary Team-Teaching Experience for a Computer and Nuclear Energy Course for Electrical and Computer Engineering Students

Science.gov (United States)

Kim, Charles; Jackson, Deborah; Keiller, Peter

2016-01-01

A new, interdisciplinary, team-taught course has been designed to educate students in Electrical and Computer Engineering (ECE) so that they can respond to global and urgent issues concerning computer control systems in nuclear power plants. This paper discusses our experience and assessment of the interdisciplinary computer and nuclear energy…

Master's degree in nuclear engineering by videotaped courses

International Nuclear Information System (INIS)

Corradini, M.L.; Vogelsang, W.F.

1991-01-01

In 1986, a group of northern midwest utilities met with faculty from the nuclear engineering department at the University of Wisconsin (UW) to discuss the possibility of offering graduate courses by videotape for academic credit and earning a master's degree. Four years later, two utility employees from Northern States Power (NSP) and Wisconsin Electric Power Companies (WEPCO) graduated from the University of Wisconsin with master's degrees earned entirely by taking videotape graduate courses at their individual nuclear power plant sites. Within these 4 years, more than a dozen videotaped graduate courses were developed by the faculty of the department in a formalized master's degree program in nuclear engineering and engineering physics. This paper outlines the program's development and its current features

VOCATIONAL TRAINING OF COMPETITIVE ENGINEERS THROUGH THE USE OF COMPUTER TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Yu. G. Loboda

2017-11-01

Full Text Available The article is concerned with the increasing importance of computer technologies and the need to educatean engineer at the level of modern advances in science and technology. New methods and technologies of learning based on the training of competitive engineers are considered. The teaching and methodological support of the didactic process of the professional training for the engineering students is presented and characterized: the motivation tasks for laboratory training and for calculating-and-graphic assignments, the individual card for the organization of the student's work, the methodical guidances. Examples of motivational tasks used for laboratory training are provided: the solution of the search tasks of linear programming, the simulation modeling of the optimal tax rates. The most effective ways to organize learning process using computer technologies for the vocational training of engineering students are indicated.

IV international conference on computational methods in marine engineering : selected papers

CERN Document Server

Oñate, Eugenio; García-Espinosa, Julio; Kvamsdal, Trond; Bergan, Pål; MARINE 2011

2013-01-01

This book contains selected papers from the Fourth International Conference on Computational Methods in Marine Engineering, held at Instituto Superior Técnico, Technical University of Lisbon, Portugal in September 2011.  Nowadays, computational methods are an essential tool of engineering, which includes a major field of interest in marine applications, such as the maritime and offshore industries and engineering challenges related to the marine environment and renewable energies. The 2011 Conference included 8 invited plenary lectures and 86 presentations distributed through 10 thematic sessions that covered many of the most relevant topics of marine engineering today. This book contains 16 selected papers from the Conference that cover “CFD for Offshore Applications”, “Fluid-Structure Interaction”, “Isogeometric Methods for Marine Engineering”, “Marine/Offshore Renewable Energy”, “Maneuvering and Seakeeping”, “Propulsion and Cavitation” and “Ship Hydrodynamics”.  The papers we...

Nuclear engineering enrollments and degrees, 1994: Appendixes

International Nuclear Information System (INIS)

1995-05-01

This survey is designed to include those programs sponsored by the Department of Energy. The survey is designed to include those programs offering a major in nuclear engineering or course work equivalent to a major in other engineering disciplines that prepare the graduates to perform as nuclear engineers. This survey provides data on nuclear engineering enrollments and degrees for use in labor market analyses, information on education programs for students, and information on new graduates to employers, government agencies, academia and professional societies

An Investigation of Graduate Student Knowledge and Usage of Open-Access Journals

Science.gov (United States)

Beard, Regina M.

2016-01-01

Graduate students lament the need to achieve the proficiency necessary to competently search multiple databases for their research assignments, regularly eschewing these sources in favor of Google Scholar or some other search engine. The author conducted an anonymous survey investigating graduate student knowledge or awareness of the open-access…

76 FR 61118 - Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting

Science.gov (United States)

2011-10-03

... NATIONAL SCIENCE FOUNDATION Advisory Committee for Computer and Information Science and... Computer and Information Science and Engineering (1115). Date and Time: November 1, 2011 from 12 p.m.-5:30... Computer and Information Science and Engineering, National Science Foundation, 4201 Wilson Blvd., Suite...

Human performance models for computer-aided engineering

Science.gov (United States)

Elkind, Jerome I. (Editor); Card, Stuart K. (Editor); Hochberg, Julian (Editor); Huey, Beverly Messick (Editor)

1989-01-01

This report discusses a topic important to the field of computational human factors: models of human performance and their use in computer-based engineering facilities for the design of complex systems. It focuses on a particular human factors design problem -- the design of cockpit systems for advanced helicopters -- and on a particular aspect of human performance -- vision and related cognitive functions. By focusing in this way, the authors were able to address the selected topics in some depth and develop findings and recommendations that they believe have application to many other aspects of human performance and to other design domains.

Computational Tools applied to Urban Engineering

OpenAIRE

Filho, Armando Carlos de Pina; Lima, Fernando Rodrigues; Amaral, Renato Dias Calado do

2010-01-01

This chapter looked for to present the main details on three technologies much used in Urban Engineering: CAD (Computer-Aided Design); GIS (Geographic Information System); and BIM (Building Information Modelling). As it can be seen, each one of them presents specific characteristics and with diverse applications in urban projects, providing better results in relation to the planning, management and maintenance of the systems. In relation to presented software, it is important to note that the...

Computational Quantum Mechanics for Materials Engineers The EMTO Method and Applications

CERN Document Server

Vitos, L

2007-01-01

Traditionally, new materials have been developed by empirically correlating their chemical composition, and the manufacturing processes used to form them, with their properties. Until recently, metallurgists have not used quantum theory for practical purposes. However, the development of modern density functional methods means that today, computational quantum mechanics can help engineers to identify and develop novel materials. Computational Quantum Mechanics for Materials Engineers describes new approaches to the modelling of disordered alloys that combine the most efficient quantum-level th

3rd International Conference on Innovations in Computer Science and Engineering

CERN Document Server

Sayal, Rishi; Rawat, Sandeep

2016-01-01

The book is a collection of high-quality peer-reviewed research papers presented at the third International Conference on Innovations in Computer Science and Engineering (ICICSE 2015) held at Guru Nanak Institutions, Hyderabad, India during 7 – 8 August 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academic and industry present their original work and exchange ideas, information, techniques and applications in the field of Communication, Computing, and Data Science and Analytics.

Master of Engineering Energy Systems Engineering Program: Smart Campus Energy Systems Demonstration DE-SC0005523

Energy Technology Data Exchange (ETDEWEB)

Dodge, Martha [Lehigh Univ., Bethlehem, PA (United States); Coulter, John [Lehigh Univ., Bethlehem, PA (United States)

2014-09-25

Program Purpose and Position: The mission of the Master of Engineering in Energy Systems Engineering program is to invigorate the pipeline of new engineering graduates interested in energy oriented careers and thus produce a new generation of technical leaders for the energy and power industries. Over the next decade, nearly 50% of the skilled workers and technical leaders in the gas and electric utility industries will retire -- a much larger void than the current available and qualified professionals could fill [CEWD, 2012 survey]. The Masters of Engineering in Energy System Engineering program provides an opportunity for cross-discipline education for graduates interested in a career in the energy industry. It focuses on electric power and the challenges and opportunities to develop a sustainable, reliable and resilient system that meets human needs in an increasingly sustainable manner through the use of environmentally sound energy resources and delivery. Both graduates and employers benefit from a well-trained professional workforce that is ready to hit the road running and be immediately productive in meeting these challenges, through this innovative and unique program.

Are women engineers in Lebanon prepared for the challenges of an engineering profession?

Science.gov (United States)

Baytiyeh, Hoda

2013-08-01

This study investigates the status of women engineers in the Middle East, considering women engineers in Lebanon as a case study. The author investigated the following questions: What are the influences behind females' decisions to choose engineering as their major course of study? What are the motives behind this decision? What are the perceptions of females regarding the essential skills for a successful engineering career? An online survey consisting of Likert-scale items was completed by 327 female engineers who graduated from universities in Lebanon and now work in various locations around the world. A genuine interest in the field appeared to be the main influence in the participants' decisions to choose engineering profession. The potential for professional growth was the leading motivator for choosing engineering. Although participants reported that they possessed adequate theoretical knowledge and technical skills before graduation, in the actual practice of engineering, they noted weaknesses in creativity and innovation.

Computer-aided engineering for Qinshan CANDU projects

International Nuclear Information System (INIS)

Huang Zhizhang; Goland, D.

1999-01-01

The author briefly describes AECL's work in applying computer-aided engineering tools to the Qinshan CANDU Project. The main emphases will be to introduce the major CADD software tools and their use in civil design, process design and EI and C design. Other special software tools and non-CADD tools and their applications are also briefly introduced

Computational experience with a three-dimensional rotary engine combustion model

Science.gov (United States)

Raju, M. S.; Willis, E. A.

1990-04-01

A new computer code was developed to analyze the chemically reactive flow and spray combustion processes occurring inside a stratified-charge rotary engine. Mathematical and numerical details of the new code were recently described by the present authors. The results are presented of limited, initial computational trials as a first step in a long-term assessment/validation process. The engine configuration studied was chosen to approximate existing rotary engine flow visualization and hot firing test rigs. Typical results include: (1) pressure and temperature histories, (2) torque generated by the nonuniform pressure distribution within the chamber, (3) energy release rates, and (4) various flow-related phenomena. These are discussed and compared with other predictions reported in the literature. The adequacy or need for improvement in the spray/combustion models and the need for incorporating an appropriate turbulence model are also discussed.

Computer vision syndrome and associated factors among medical and engineering students in chennai.

Science.gov (United States)

Logaraj, M; Madhupriya, V; Hegde, Sk

2014-03-01

Almost all institutions, colleges, universities and homes today were using computer regularly. Very little research has been carried out on Indian users especially among college students the effects of computer use on the eye and vision related problems. The aim of this study was to assess the prevalence of computer vision syndrome (CVS) among medical and engineering students and the factors associated with the same. A cross-sectional study was conducted among medical and engineering college students of a University situated in the suburban area of Chennai. Students who used computer in the month preceding the date of study were included in the study. The participants were surveyed using pre-tested structured questionnaire. Among engineering students, the prevalence of CVS was found to be 81.9% (176/215) while among medical students; it was found to be 78.6% (158/201). A significantly higher proportion of engineering students 40.9% (88/215) used computers for 4-6 h/day as compared to medical students 10% (20/201) (P medical students. Students who used computer for 4-6 h were at significantly higher risk of developing redness (OR = 1.2, 95% CI = 1.0-3.1,P = 0.04), burning sensation (OR = 2.1,95% CI = 1.3-3.1, P computer for less than 4 h. Significant correlation was found between increased hours of computer use and the symptoms redness, burning sensation, blurred vision and dry eyes. The present study revealed that more than three-fourth of the students complained of any one of the symptoms of CVS while working on the computer.

Graduate Experience in Science Education: the development of a science education course for biomedical science graduate students.

Science.gov (United States)

Markowitz, Dina G; DuPré, Michael J

2007-01-01

The University of Rochester's Graduate Experience in Science Education (GESE) course familiarizes biomedical science graduate students interested in pursuing academic career tracks with a fundamental understanding of some of the theory, principles, and concepts of science education. This one-semester elective course provides graduate students with practical teaching and communication skills to help them better relate science content to, and increase their confidence in, their own teaching abilities. The 2-h weekly sessions include an introduction to cognitive hierarchies, learning styles, and multiple intelligences; modeling and coaching some practical aspects of science education pedagogy; lesson-planning skills; an introduction to instructional methods such as case studies and problem-based learning; and use of computer-based instructional technologies. It is hoped that the early development of knowledge and skills about teaching and learning will encourage graduate students to continue their growth as educators throughout their careers. This article summarizes the GESE course and presents evidence on the effectiveness of this course in providing graduate students with information about teaching and learning that they will use throughout their careers.

For-Profit Colleges Compute Their Own Graduation Rates

Science.gov (United States)

Blumenstyk, Goldie

2012-01-01

For-profit colleges are some of the biggest critics of the federal graduation rate, arguing that it gives an inaccurate image of their institutions. They point out that the official calculation doesn't take into account the vast majority of the students who attend their institutions, most of whom are neither "first-time" nor "full-time." So major…

Outcomes assessment of science & engineering doctor of philosophy (Ph.D.) programs: An exploratory study of prospective influencers in distinguished graduate placement

Science.gov (United States)

Williamson, Louise M.

This exploratory study was an investigation of the mission and emphases of twenty-two science & engineering doctor of philosophy (Ph.D.) programs in ten fields of study at nine public research universities in the United States and the corresponding influence those factors impose on placement of Ph.D. graduates of those programs into academic program settings. Ph.D. program chairs participated via protocol to provide descriptive, statistical, and experiential details of their Ph.D. programs and offered insight on current conditions for academic placement opportunities. The quantitative analysis served as the basis of examination of influencers in graduate placement for those Ph.D. programs that are informed about placement activity of their graduates. Among the nine tested hypotheses there were no statistically significant findings. The qualitative expressions of this study---those found in the confounding variables, the limitations of the study, those questions that elicited opinions and further discussion and follow-up queries with program chairs---added most meaningfully, however, to the study in that they served as a gauge of the implications of neglect for those Ph.D. programs that remain uninformed about their graduate placement activity. Central to the findings of this study was that one compelling fact remains the same. Denecke, Director of Best Practice at the Council of Graduate Schools, pointed out years ago that just as "we know very little about why those who finish and why those who leave do so, we also know surprisingly little about where students go after their degrees...we therefore have little information about how effective doctoral programs are in preparing doctorates for short- and long-term career success." The fact remains that the effectiveness of doctoral programs in the context of career success is just as uncertain today. A serious admonition is that one-half of those programs that participated in this study remain uninformed about the

Engineering Courses on Computational Thinking Through Solving Problems in Artificial Intelligence

Directory of Open Access Journals (Sweden)

Piyanuch Silapachote

2017-09-01

Full Text Available Computational thinking sits at the core of every engineering and computing related discipline. It has increasingly emerged as its own subject in all levels of education. It is a powerful cornerstone for cognitive development, creative problem solving, algorithmic thinking and designs, and programming. How to effectively teach computational thinking skills poses real challenges and creates opportunities. Targeting entering computer science and engineering undergraduates, we resourcefully integrate elements from artificial intelligence (AI into introductory computing courses. In addition to comprehension of the essence of computational thinking, practical exercises in AI enable inspirations of collaborative problem solving beyond abstraction, logical reasoning, critical and analytical thinking. Problems in machine intelligence systems intrinsically connect students to algorithmic oriented computing and essential mathematical foundations. Beyond knowledge representation, AI fosters a gentle introduction to data structures and algorithms. Focused on engaging mental tool, a computer is never a necessity. Neither coding nor programming is ever required. Instead, students enjoy constructivist classrooms designed to always be active, flexible, and highly dynamic. Learning to learn and reflecting on cognitive experiences, they rigorously construct knowledge from collectively solving exciting puzzles, competing in strategic games, and participating in intellectual discussions.

10th International Conference on Scientific Computing in Electrical Engineering

CERN Document Server

Clemens, Markus; Günther, Michael; Maten, E

2016-01-01

This book is a collection of selected papers presented at the 10th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in Wuppertal, Germany in 2014. The book is divided into five parts, reflecting the main directions of SCEE 2014: 1. Device Modeling, Electric Circuits and Simulation, 2. Computational Electromagnetics, 3. Coupled Problems, 4. Model Order Reduction, and 5. Uncertainty Quantification. Each part starts with a general introduction followed by the actual papers. The aim of the SCEE 2014 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, with the goal of fostering intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems. The methodological focus was on model order reduction and uncertainty quantification.

Green IT engineering components, networks and systems implementation

CERN Document Server

Kondratenko, Yuriy; Kacprzyk, Janusz

2017-01-01

This book presents modern approaches to improving the energy efficiency, safety and environmental performance of industrial processes and products, based on the application of advanced trends in Green Information Technologies (IT) Engineering to components, networks and complex systems (software, programmable and hardware components, communications, Cloud and IoT-based systems, as well as IT infrastructures). The book’s 16 chapters, prepared by authors from Greece, Malaysia, Russia, Slovakia, Ukraine and the United Kingdom, are grouped into four sections: (1) The Green Internet of Things, Cloud Computing and Data Mining, (2) Green Mobile and Embedded Control Systems, (3) Green Logic and FPGA Design, and (4) Green IT for Industry and Smart Grids. The book will motivate researchers and engineers from different IT domains to develop, implement and propagate green values in complex systems. Further, it will benefit all scientists and graduate students pursuing research in computer science with a focus on green ...

Bone tissue engineering scaffolding: computer-aided scaffolding techniques.

Science.gov (United States)

Thavornyutikarn, Boonlom; Chantarapanich, Nattapon; Sitthiseripratip, Kriskrai; Thouas, George A; Chen, Qizhi

Tissue engineering is essentially a technique for imitating nature. Natural tissues consist of three components: cells, signalling systems (e.g. growth factors) and extracellular matrix (ECM). The ECM forms a scaffold for its cells. Hence, the engineered tissue construct is an artificial scaffold populated with living cells and signalling molecules. A huge effort has been invested in bone tissue engineering, in which a highly porous scaffold plays a critical role in guiding bone and vascular tissue growth and regeneration in three dimensions. In the last two decades, numerous scaffolding techniques have been developed to fabricate highly interconnective, porous scaffolds for bone tissue engineering applications. This review provides an update on the progress of foaming technology of biomaterials, with a special attention being focused on computer-aided manufacturing (Andrade et al. 2002) techniques. This article starts with a brief introduction of tissue engineering (Bone tissue engineering and scaffolds) and scaffolding materials (Biomaterials used in bone tissue engineering). After a brief reviews on conventional scaffolding techniques (Conventional scaffolding techniques), a number of CAM techniques are reviewed in great detail. For each technique, the structure and mechanical integrity of fabricated scaffolds are discussed in detail. Finally, the advantaged and disadvantage of these techniques are compared (Comparison of scaffolding techniques) and summarised (Summary).

Advanced Technology for Engineering Education

Science.gov (United States)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1998-01-01

This document contains the proceedings of the Workshop on Advanced Technology for Engineering Education, held at the Peninsula Graduate Engineering Center, Hampton, Virginia, February 24-25, 1998. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to assess the status of advanced technologies for engineering education and to explore the possibility of forming a consortium of interested individuals/universities for curriculum reform and development using advanced technologies. The presentations covered novel delivery systems and several implementations of new technologies for engineering education. Certain materials and products are identified in this publication in order to specify adequately the materials and products that were investigated in the research effort. In no case does such identification imply recommendation or endorsement of products by NASA, nor does it imply that the materials and products are the only ones or the best ones available for this purpose. In many cases equivalent materials and products are available and would probably produce equivalent results.

Establishing a `Centre for Engineering Experimentation and Design Simulation': a step towards restructuring engineering education in India

Science.gov (United States)

Venkateswarlu, P.

2017-07-01

Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with necessary skills to create and advance knowledge that meets global standards. To achieve this goal, this paper proposes establishing a central facility, 'Centre for Engineering Experimentation and Design Simulation' (CEEDS) in autonomous engineering colleges in India. The centre will be equipped with the most recent technology resources and computational facilities where students execute novel interdisciplinary product-oriented projects benefiting both industry and society. Students undertake two projects: a short-term project aimed at an engineering solution to a problem in energy, health and environment and the other a major industry-supported project devoted to a product that enhances innovation and creativity. The paper presents the current status, the theoretical and pedagogical foundation for the centre's relevance, an activity plan and its implementation in the centre for product-based learning with illustrative examples.

Developing the Next Generation of Science Data System Engineers

Science.gov (United States)

Moses, J. F.; Durachka, C. D.; Behnke, J.

2015-12-01

At Goddard, engineers and scientists with a range of experience in science data systems are needed to employ new technologies and develop advances in capabilities for supporting new Earth and Space science research. Engineers with extensive experience in science data, software engineering and computer-information architectures are needed to lead and perform these activities. The increasing types and complexity of instrument data and emerging computer technologies coupled with the current shortage of computer engineers with backgrounds in science has led the need to develop a career path for science data systems engineers and architects. The current career path, in which undergraduate students studying various disciplines such as Computer Engineering or Physical Scientist, generally begins with serving on a development team in any of the disciplines where they can work in depth on existing Goddard data systems or serve with a specific NASA science team. There they begin to understand the data, infuse technologies, and begin to know the architectures of science data systems. From here the typical career involves peer mentoring, on-the-job training or graduate level studies in analytics, computational science and applied science and mathematics. At the most senior level, engineers become subject matter experts and system architect experts, leading discipline-specific data centers and large software development projects. They are recognized as a subject matter expert in a science domain, they have project management expertise, lead standards efforts and lead international projects. A long career development remains necessary not only because of the breath of knowledge required across physical sciences and engineering disciplines, but also because of the diversity of instrument data being developed today both by NASA and international partner agencies and because multi-discipline science and practitioner communities expect to have access to all types of observational

Developing the Next Generation of Science Data System Engineers

Science.gov (United States)

Moses, John F.; Behnke, Jeanne; Durachka, Christopher D.

2016-01-01

At Goddard, engineers and scientists with a range of experience in science data systems are needed to employ new technologies and develop advances in capabilities for supporting new Earth and Space science research. Engineers with extensive experience in science data, software engineering and computer-information architectures are needed to lead and perform these activities. The increasing types and complexity of instrument data and emerging computer technologies coupled with the current shortage of computer engineers with backgrounds in science has led the need to develop a career path for science data systems engineers and architects.The current career path, in which undergraduate students studying various disciplines such as Computer Engineering or Physical Scientist, generally begins with serving on a development team in any of the disciplines where they can work in depth on existing Goddard data systems or serve with a specific NASA science team. There they begin to understand the data, infuse technologies, and begin to know the architectures of science data systems. From here the typical career involves peermentoring, on-the-job training or graduate level studies in analytics, computational science and applied science and mathematics. At the most senior level, engineers become subject matter experts and system architect experts, leading discipline-specific data centers and large software development projects. They are recognized as a subject matter expert in a science domain, they have project management expertise, lead standards efforts and lead international projects. A long career development remains necessary not only because of the breadth of knowledge required across physical sciences and engineering disciplines, but also because of the diversity of instrument data being developed today both by NASA and international partner agencies and because multidiscipline science and practitioner communities expect to have access to all types of observational data

Analyzing Team Based Engineering Design Process in Computer Supported Collaborative Learning

Science.gov (United States)

Lee, Dong-Kuk; Lee, Eun-Sang

2016-01-01

The engineering design process has been largely implemented in a collaborative project format. Recently, technological advancement has helped collaborative problem solving processes such as engineering design to have efficient implementation using computers or online technology. In this study, we investigated college students' interaction and…

Advances in Multimedia, Software Engineering and Computing Vol.1 : Proceedings of the 2011 MSEC International Conference on Multimedia, Software Engineering and Computing

CERN Document Server

Lin, Sally

2012-01-01

MSEC2011 is an integrated conference concentrating its focus upon Multimedia ,Software Engineering, Computing and Education. In the proceeding, you can learn much more knowledge about Multimedia, Software Engineering ,Computing and Education of researchers all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned field. In order to meet high standard of Springer, AISC series ,the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organization had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

Advances in Multimedia, Software Engineering and Computing Vol.2 : Proceedings of the 2011 MSEC International Conference on Multimedia, Software Engineering and Computing

CERN Document Server

Lin, Sally

2012-01-01

MSEC2011 is an integrated conference concentrating its focus upon Multimedia ,Software Engineering, Computing and Education. In the proceeding, you can learn much more knowledge about Multimedia, Software Engineering, Computing and Education of researchers all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned field. In order to meet high standard of Springer, AISC series ,the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organization had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

Teaching Continuum Mechanics in a Mechanical Engineering Program

Science.gov (United States)

Liu, Yucheng

2011-01-01

This paper introduces a graduate course, continuum mechanics, which is designed for and taught to graduate students in a Mechanical Engineering (ME) program. The significance of continuum mechanics in engineering education is demonstrated and the course structure is described. Methods used in teaching this course such as topics, class…

4th International Conference on Innovations in Computer Science and Engineering

CERN Document Server

Sayal, Rishi; Rawat, Sandeep

2017-01-01

The book is a collection of high-quality peer-reviewed research papers presented at the Fourth International Conference on Innovations in Computer Science and Engineering (ICICSE 2016) held at Guru Nanak Institutions, Hyderabad, India during 22 – 23 July 2016. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academic and industry present their original work and exchange ideas, information, techniques and applications in the field of data science and analytics, artificial intelligence and expert systems, mobility, cloud computing, network security, and emerging technologies.

International Conference on Artificial Intelligence and Evolutionary Computations in Engineering Systems

CERN Document Server

Vijayakumar, K; Panigrahi, Bijaya; Das, Swagatam

2017-01-01

The volume is a collection of high-quality peer-reviewed research papers presented in the International Conference on Artificial Intelligence and Evolutionary Computation in Engineering Systems (ICAIECES 2016) held at SRM University, Chennai, Tamilnadu, India. This conference is an international forum for industry professionals and researchers to deliberate and state their research findings, discuss the latest advancements and explore the future directions in the emerging areas of engineering and technology. The book presents original work and novel ideas, information, techniques and applications in the field of communication, computing and power technologies.

FOREIGN LANGUAGE AS A MEANS OF COMMUNICATIVE COMPETENCE DEVELOPMENT OF FUTURE SOFTWARE ENGINEERS

Directory of Open Access Journals (Sweden)

Viacheslav V. Osadchyi

2017-04-01

Full Text Available The article deals with the problem of foreign language teaching for future software engineers in higher educational establishments. Requirements of employers to applicants for engineering positions as to their linguistic competence are analyzed. Communicative competence requirements for graduates of higher educational establishments according to national branch standards for software and computer engineers are highlighted. The results of the curricula analysis of the leading national universities as to foreign language teaching are given. The aim and the contents of “English for professional purpose” course are presented, as well as described procedural guidelines of the course, its aim, structure and contents; considered some aspects of information and consultation support.

Graduate Curriculum | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering, and grad students with solar panels on the second floor roof of Bolton Hall. Dr. Adel Nasiri, Professor of Electrical Engineering, and grad students with solar panels on the second floor roof

Computer Aided Battery Engineering Consortium

Energy Technology Data Exchange (ETDEWEB)

Pesaran, Ahmad

2016-06-07

A multi-national lab collaborative team was assembled that includes experts from academia and industry to enhance recently developed Computer-Aided Battery Engineering for Electric Drive Vehicles (CAEBAT)-II battery crush modeling tools and to develop microstructure models for electrode design - both computationally efficient. Task 1. The new Multi-Scale Multi-Domain model framework (GH-MSMD) provides 100x to 1,000x computation speed-up in battery electrochemical/thermal simulation while retaining modularity of particles and electrode-, cell-, and pack-level domains. The increased speed enables direct use of the full model in parameter identification. Task 2. Mechanical-electrochemical-thermal (MECT) models for mechanical abuse simulation were simultaneously coupled, enabling simultaneous modeling of electrochemical reactions during the short circuit, when necessary. The interactions between mechanical failure and battery cell performance were studied, and the flexibility of the model for various batteries structures and loading conditions was improved. Model validation is ongoing to compare with test data from Sandia National Laboratories. The ABDT tool was established in ANSYS. Task 3. Microstructural modeling was conducted to enhance next-generation electrode designs. This 3- year project will validate models for a variety of electrodes, complementing Advanced Battery Research programs. Prototype tools have been developed for electrochemical simulation and geometric reconstruction.

Structural motion engineering

CERN Document Server

Connor, Jerome

2014-01-01

This innovative volume provides a systematic treatment of the basic concepts and computational procedures for structural motion design and engineering for civil installations. The authors illustrate the application of motion control to a wide spectrum of buildings through many examples. Topics covered include optimal stiffness distributions for building-type structures, the role of damping in controlling motion, tuned mass dampers, base isolation systems, linear control, and nonlinear control. The book's primary objective is the satisfaction of motion-related design requirements, such as restrictions on displacement and acceleration. The book is ideal for practicing engineers and graduate students. This book also: ·         Broadens practitioners' understanding of structural motion control, the enabling technology for motion-based design ·         Provides readers the tools to satisfy requirements of modern, ultra-high strength materials that lack corresponding stiffness, where the motion re...

Battlefield awareness computers: the engine of battlefield digitization

Science.gov (United States)

Ho, Jackson; Chamseddine, Ahmad

1997-06-01

To modernize the army for the 21st century, the U.S. Army Digitization Office (ADO) initiated in 1995 the Force XXI Battle Command Brigade-and-Below (FBCB2) Applique program which became a centerpiece in the U.S. Army's master plan to win future information wars. The Applique team led by TRW fielded a 'tactical Internet' for Brigade and below command to demonstrate the advantages of 'shared situation awareness' and battlefield digitization in advanced war-fighting experiments (AWE) to be conducted in March 1997 at the Army's National Training Center in California. Computing Devices is designated the primary hardware developer for the militarized version of the battlefield awareness computers. The first generation of militarized battlefield awareness computer, designated as the V3 computer, was an integration of off-the-shelf components developed to meet the agressive delivery requirements of the Task Force XXI AWE. The design efficiency and cost effectiveness of the computer hardware were secondary in importance to delivery deadlines imposed by the March 1997 AWE. However, declining defense budgets will impose cost constraints on the Force XXI production hardware that can only be met by rigorous value engineering to further improve design optimization for battlefield awareness without compromising the level of reliability the military has come to expect in modern military hardened vetronics. To answer the Army's needs for a more cost effective computing solution, Computing Devices developed a second generation 'combat ready' battlefield awareness computer, designated the V3+, which is designed specifically to meet the upcoming demands of Force XXI (FBCB2) and beyond. The primary design objective is to achieve a technologically superior design, value engineered to strike an optimal balance between reliability, life cycle cost, and procurement cost. Recognizing that the diverse digitization demands of Force XXI cannot be adequately met by any one computer hardware

Computational engineering applied to the concentrating solar power technology

International Nuclear Information System (INIS)

Giannuzzi, Giuseppe Mauro; Miliozzi, Adio

2006-01-01

Solar power plants based on parabolic-trough collectors present innumerable thermo-structural problems related on the one hand to the high temperatures of the heat transfer fluid, and on the other to the need og highly precise aiming and structural resistance. Devising an engineering response to these problems implies analysing generally unconventional solutions. At present, computational engineering is the principal investigating tool; it speeds the design of prototype installations and significantly reduces the necessary but costly experimental programmes [it

Alan Turing's Automatic Computing Engine The Master Codebreaker's Struggle to build the Modern Computer

CERN Document Server

Copeland, B Jack

2005-01-01

The mathematical genius Alan Turing (1912-1954) was one of the greatest scientists and thinkers of the 20th century. Now well known for his crucial wartime role in breaking the ENIGMA code, he was the first to conceive of the fundamental principle of the modern computer-the idea of controlling a computing machine's operations by means of a program of coded instructions, stored in the machine's 'memory'. In 1945 Turing drew up his revolutionary design for an electronic computingmachine-his Automatic Computing Engine ('ACE'). A pilot model of the ACE ran its first program in 1950 and the product

SOCR: Statistics Online Computational Resource

Directory of Open Access Journals (Sweden)

Ivo D. Dinov

2006-10-01

Full Text Available The need for hands-on computer laboratory experience in undergraduate and graduate statistics education has been firmly established in the past decade. As a result a number of attempts have been undertaken to develop novel approaches for problem-driven statistical thinking, data analysis and result interpretation. In this paper we describe an integrated educational web-based framework for: interactive distribution modeling, virtual online probability experimentation, statistical data analysis, visualization and integration. Following years of experience in statistical teaching at all college levels using established licensed statistical software packages, like STATA, S-PLUS, R, SPSS, SAS, Systat, etc., we have attempted to engineer a new statistics education environment, the Statistics Online Computational Resource (SOCR. This resource performs many of the standard types of statistical analysis, much like other classical tools. In addition, it is designed in a plug-in object-oriented architecture and is completely platform independent, web-based, interactive, extensible and secure. Over the past 4 years we have tested, fine-tuned and reanalyzed the SOCR framework in many of our undergraduate and graduate probability and statistics courses and have evidence that SOCR resources build student's intuition and enhance their learning.

Develop railway engineering modules in UTK civil engineering undergraduate and graduate courses.

Science.gov (United States)

2015-05-31

The importance of railway transport has long been recognized. However, no railway : engineering courses have been provided in the UTK civil engineering curricula. The : objective of this education project is to develop some railway engineering module...

The future of computer-aided design and engineering at CERN

CERN Document Server

Høimyr, Nils-Joar

2004-01-01

This working note discusses design and engineering processes at CERN and Computer Aided Design and Engineering tools. The main focus of this note is Mechanical design and CAE activities and how to share and organize the data produced by CAD/CAE tools. These issues cannot be addressed without taking a global view of the engineering activities at CERN. As more and more of the detailed design work is done by external suppliers, the design processes at CERN change. Traditional design work where draftsmen are producing drawings on the request from engineers is replaced by conceptual design work done by domain specialists and engineers. Furthermore CAD and FEM tools have evolved from specialist tools to mainstream utilities mastered by most engineers. Design activities nowadays can now be carried out directly by the project engineer without the use of a design (drawing) office. This environment poses different requirements for design- and engineering support activities as well as the selection of CAE-tools. Design ...

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

Science.gov (United States)

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

XIV Mediterranean Conference on Medical and Biological Engineering and Computing

CERN Document Server

Christofides, Stelios; Pattichis, Constantinos

2016-01-01

This volume presents the proceedings of Medicon 2016, held in Paphos, Cyprus. Medicon 2016 is the XIV in the series of regional meetings of the International Federation of Medical and Biological Engineering (IFMBE) in the Mediterranean. The goal of Medicon 2016 is to provide updated information on the state of the art on Medical and Biological Engineering and Computing under the main theme “Systems Medicine for the Delivery of Better Healthcare Services”. Medical and Biological Engineering and Computing cover complementary disciplines that hold great promise for the advancement of research and development in complex medical and biological systems. Research and development in these areas are impacting the science and technology by advancing fundamental concepts in translational medicine, by helping us understand human physiology and function at multiple levels, by improving tools and techniques for the detection, prevention and treatment of disease. Medicon 2016 provides a common platform for the cross fer...

The Role of Computer Networks in Aerospace Engineering.

Science.gov (United States)

Bishop, Ann Peterson

1994-01-01

Presents selected results from an empirical investigation into the use of computer networks in aerospace engineering based on data from a national mail survey. The need for user-based studies of electronic networking is discussed, and a copy of the questionnaire used in the survey is appended. (Contains 46 references.) (LRW)

2016 China Academic Conference on Printing, Packaging Engineering & Media Technology

CERN Document Server

Ouyang, Yun; Xu, Min; Yang, Li; Ouyang, Yujie

2017-01-01

This book includes a selection of reviewed papers presented at the 2016 China Academic Conference on Printing, Packaging Engineering & Media Technology, held on November 25-27, 2016 in Xi’an, China. The conference was jointly organized by China Academy of Printing Technology, Xi’an University of Technology and Stuttgart Media University of Germany. The proceedings cover the recent outcomes on color science and technology, image processing technology, digital media technology, digital process management technology in packaging and packaging etc. They will be of interest to university researchers, R&D engineers and graduate students in graphic communications, packaging, color science, image science, material science, computer science, digital media and network technology fields.

Base Input - Enrollment and Graduation Data for Naval Postgraduate School for the School of Business and Public Policy, Meyer Institute of Systems Engineering, and PhD Grads by curriculum by year.

OpenAIRE

2005-01-01

Graphs of Base Input - Enrollment and Graduation Data for Naval Postgraduate School for the School of Business and Public Policy, Meyer Institute of Systems Engineering, and PhD Grads by curriculum by year.

Activities of the Institute for Computer Applications in Science and Engineering (ICASE)

Science.gov (United States)

1988-01-01

This report summarizes research conducted at the Institute for Computer Applications Science and Engineering in applied mathematics, numerical analysis, and computer science during the period October 2, 1987 through March 31, 1988.

[Research Conducted at the Institute for Computer Applications in Science and Engineering

Science.gov (United States)

1997-01-01

This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period 1 Oct. 1996 - 31 Mar. 1997.

Computer simulation of a turbocharged direct injection diesel engine

International Nuclear Information System (INIS)

Bannikiv, M.G.; Saeed, M.

2005-01-01

Engine model described in this paper was developed to investigate the working process and overall performance of a heavy-duty turbocharged direct injection diesel engine. The primary focus was made on exploring the methods of engine power boosting, study of engine behaviour after their implementation and optimization of all engine parameters. Engine model is classified as on zone, zero dimensional and phenomenological and includes submodels for in cylinder heat transfer, heat release and valve flow processes. Turbocharger model is developed using the available maps of turbine and compressor. The whole engine system is zero dimensional and the different system components are liked by means of mean values for mass flow, temperatures, pressures and gas composition. NASA polynomials are used for computing thermal properties of mixture of gasses. Model is flexible and easy to accommodate additional submodels of various physical phenomena such as emission formation, fuel injection, ignition delay period calculation etc. The software is developed in MATLAB. Software was used to analyse an evaporative cooling of boost air as a method of an increase of engine power. Results of simulation are provided in the paper. For the augmented engine, mechanical and thermal loads required for the strength analyses were obtained. (author)

Advances in Computer Science and Information Engineering Volume 2

CERN Document Server

Lin, Sally

2012-01-01

CSIE2012 is an integrated conference concentrating its focus on Computer Science and Information Engineering . In the proceeding, you can learn much more knowledge about Computer Science and Information Engineering of researchers from all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned fields. In order to meet the high quality of Springer, AISC series, the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organizers had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

Advances in Computer Science and Information Engineering Volume 1

CERN Document Server

Lin, Sally

2012-01-01

CSIE2012 is an integrated conference concentrating its focus on Computer Science and Information Engineering . In the proceeding, you can learn much more knowledge about Computer Science and Information Engineering of researchers from all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned fields. In order to meet the high quality of Springer, AISC series, the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organizers had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

Integrated Computational Material Engineering Technologies for Additive Manufacturing, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — QuesTek Innovations, a pioneer in Integrated Computational Materials Engineering (ICME) and a Tibbetts Award recipient, is teaming with University of Pittsburgh,...

Cognitive engineering in the design of human-computer interaction and expert systems

International Nuclear Information System (INIS)

Salvendy, G.

1987-01-01

The 68 papers contributing to this book cover the following areas: Theories of Interface Design; Methodologies of Interface Design; Applications of Interface Design; Software Design; Human Factors in Speech Technology and Telecommunications; Design of Graphic Dialogues; Knowledge Acquisition for Knowledge-Based Systems; Design, Evaluation and Use of Expert Systems. This demonstrates the dual role of cognitive engineering. On the one hand cognitive engineering is utilized to design computing systems which are compatible with human cognition and can be effectively and be easily utilized by all individuals. On the other hand, cognitive engineering is utilized to transfer human cognition into the computer for the purpose of building expert systems. Two papers are of interest to INIS

First year engineering students: Perceptions of engineers and engineering work amongst domestic and international students

Directory of Open Access Journals (Sweden)

Dawn Bennett

2015-03-01

Full Text Available Despite being well ahead of many other disciplines in establishing strong and evidence-based research and practice, engineering in many countries still experiences high rates of student and graduate attrition. One possible reason for this is that students enter engineering study without understanding the realities of either their degree program or engineering work, and without a sense of motivation and commitment. The research reported here aimed to extend understanding of first year engineering students’ thinking about their competencies, identity, self-efficacy, motivation, and career. The study involved over 1,100 first year engineering students enrolled in a common first year unit. Responses were coded using the Engineers Australia graduate competencies as a framework, and this paper reports findings from the most diverse cohort of students (n=260, of whom 49% were international students with English as their second language. The research identified differences between international and domestic students’ perceptions of self and of career competencies, possibly related to self-esteem. Implications include improved confidence and motivation to learn as students consider their strengths, interests and goals. Further, the research raises the need for analysis of international students’ cultural and educational background to determine how different cohorts of international students self-appraise and how they associate learning with their future careers.

Self-definition of women experiencing a nontraditional graduate fellowship program

Science.gov (United States)

Buck, Gayle A.; Leslie-Pelecky, Diandra L.; Lu, Yun; Plano Clark, Vicki L.; Creswell, John W.

2006-10-01

Women continue to be underrepresented in the fields of science, technology, engineering, and mathematics (STEM). One factor contributing to this underrepresentation is the graduate school experience. Graduate programs in STEM fields are constructed around assumptions that ignore the reality of women's lives; however, emerging opportunities may lead to experiences that are more compatible for women. One such opportunity is the Graduate Teaching Fellows in K-12 Education (GK-12) Program, which was introduced by the National Science Foundation in 1999. Although this nontraditional graduate program was not designed explicitly for women, it provided an unprecedented context in which to research how changing some of the basic assumptions upon which a graduate school operates may impact women in science. This exploratory case study examines the self-definition of 8 women graduate students who participated in a GK-12 program at a major research university. The findings from this case study contribute to higher education's understanding of the terrain women graduate students in the STEM areas must navigate as they participate in programs that are thought to be more conducive to their modes of self-definition while they continue to seek to be successful in the historically Eurocentric, masculine STEM fields.

1993 US petroleum engineering manpower supply and demand

International Nuclear Information System (INIS)

Wattenbarger, R.A.; Morriss, S.

1994-01-01

Each year, the SPE Manpower Committee reports on the results of petroleum engineering manpower supply and demand surveys to inform SPE members about hiring patterns of engineers in the petroleum industry and the supply of graduates from US petroleum engineering schools. The SPE Manpower Committee's US surveys show that large companies will decrease their hiring while small companies and service companies will increase their hiring of engineers. During 1992--93, only about 65% of graduating petroleum engineering students were known to have jobs. Another finding is that, overall, new US SPE membership is decreasing while non-US membership is increasing

GRAPHIC COMPETENCE AS A COMPONENT OF TRAINING FUTURE ENGINEERING TEACHERS OF COMPUTER PROFILE

Directory of Open Access Journals (Sweden)

Yuliya Kozak

2016-06-01

Full Text Available The article analysis the system of professional training of future engineering teachers of computer type at the pedagogical universities, including graphical content preparation. It is established that the modernization of this system of training engineering teachers of computer profile is extremely important because of increasing demands for total graphics education, which in terms of mass communication, the need to compress a significant amount of information and opportunities provided by new information technologies, becomes so important as second literacy. The article reveals the essential characteristics of the concept of graphic competence as important component of the modernization of the education system, and an attempt to find promising ways of further work to effective solving of the issue of formation of graphic competence of engineering teachers of computer profile.

Advanced interdisciplinary undergraduate program: light engineering

Science.gov (United States)

Bakholdin, Alexey; Bougrov, Vladislav; Voznesenskaya, Anna; Ezhova, Kseniia

2016-09-01

The undergraduate educational program "Light Engineering" of an advanced level of studies is focused on development of scientific learning outcomes and training of professionals, whose activities are in the interdisciplinary fields of Optical engineering and Technical physics. The program gives practical experience in transmission, reception, storage, processing and displaying information using opto-electronic devices, automation of optical systems design, computer image modeling, automated quality control and characterization of optical devices. The program is implemented in accordance with Educational standards of the ITMO University. The specific features of the Program is practice- and problem-based learning implemented by engaging students to perform research and projects, internships at the enterprises and in leading Russian and international research educational centers. The modular structure of the Program and a significant proportion of variable disciplines provide the concept of individual learning for each student. Learning outcomes of the program's graduates include theoretical knowledge and skills in natural science and core professional disciplines, deep knowledge of modern computer technologies, research expertise, design skills, optical and optoelectronic systems and devices.

Technology-assisted education in graduate medical education: a review of the literature

OpenAIRE

Jwayyed, Sharhabeel; Stiffler, Kirk A; Wilber, Scott T; Southern, Alison; Weigand, John; Bare, Rudd; Gerson, Lowell W

2011-01-01

Studies on computer-aided instruction and web-based learning have left many questions unanswered about the most effective use of technology-assisted education in graduate medical education. Objective We conducted a review of the current medical literature to report the techniques, methods, frequency and effectiveness of technology-assisted education in graduate medical education. Methods A structured review of MEDLINE articles dealing with "Computer-Assisted Instruction," "Internet or World W...

Numerical methods in matrix computations

CERN Document Server

Björck, Åke

2015-01-01

Matrix algorithms are at the core of scientific computing and are indispensable tools in most applications in engineering. This book offers a comprehensive and up-to-date treatment of modern methods in matrix computation. It uses a unified approach to direct and iterative methods for linear systems, least squares and eigenvalue problems. A thorough analysis of the stability, accuracy, and complexity of the treated methods is given. Numerical Methods in Matrix Computations is suitable for use in courses on scientific computing and applied technical areas at advanced undergraduate and graduate level. A large bibliography is provided, which includes both historical and review papers as well as recent research papers. This makes the book useful also as a reference and guide to further study and research work. Åke Björck is a professor emeritus at the Department of Mathematics, Linköping University. He is a Fellow of the Society of Industrial and Applied Mathematics.

Engineering of systems for application of scientific computing in industry

OpenAIRE

Loeve, W.; Loeve,　W.

1992-01-01

Mathematics software is of growing importance for computer simulation in industrial computer aided engineering. To be applicable in industry the mathematics software and supporting software must be structured in such a way that functions and performance can be maintained easily. In the present paper a method is described for development of mathematics software in such a way that this requirement can be met.

Using Puppet to contextualize computing resources for ATLAS analysis on Google Compute Engine

International Nuclear Information System (INIS)

Öhman, Henrik; Panitkin, Sergey; Hendrix, Valerie

2014-01-01

With the advent of commercial as well as institutional and national clouds, new opportunities for on-demand computing resources for the HEP community become available. The new cloud technologies also come with new challenges, and one such is the contextualization of computing resources with regard to requirements of the user and his experiment. In particular on Google's new cloud platform Google Compute Engine (GCE) upload of user's virtual machine images is not possible. This precludes application of ready to use technologies like CernVM and forces users to build and contextualize their own VM images from scratch. We investigate the use of Puppet to facilitate contextualization of cloud resources on GCE, with particular regard to ease of configuration and dynamic resource scaling.

ECOS: a configurable, multi-terabyte database supporting engineering and technical computing at Sizewell B

International Nuclear Information System (INIS)

Binns, F.; Fish, A.

1992-01-01

One of the three main classes of computing support systems is concerned with the technical and engineering aspects of Sizewell-B power station. These aspects are primarily concerned with engineering means to optimise plant use to maximise power output by increasing availability and efficiency. At Sizewell-B the Engineering Computer system (ECOS) will provide the necessary support facilities, and is described. ECOS is being used by the station commissioning team and for monitoring the state of some plant already in service. (Author)

NDA National Graduate Programme 'nucleargraduates'

International Nuclear Information System (INIS)

Dawson, Carl

2010-01-01

The aim of this paper is to outline the NDA National Graduate Programme (nuclear graduates). The NDA has a remit under the Energy Act (2004) 'to maintain and develop the skills for decommissioning and nuclear clean-up'. Although current research is now being reviewed, there is significant evidence to suggest that the age profile in the Site Licence Companies is skewed towards older workers and there is likely to be a skill shortage in 3-5 years. As nuclear clean-up is a national issue; skill shortages also become a national issue in a very real sense. In addition, evidence suggests that the industry needs to be constantly challenged in order to achieve its targets for decommissioning. The NDA has a unique position under the Act. It is both a strategic overseer and direct employer. To this end the 'National Graduate Programme' is aligned to both the NDA's previous succession plans and the needs of the industry. Industry needs leadership that challenges the status quo and moves the UK nuclear industry to become best in class; Industry needs a dedicated to programme to address skills shortages and difficult to recruit areas such as, but not exclusively, estimators, schedulers, contract managers, site engineers, decommissioning technicians, safety monitors; The NDA has indicated a 'commercial and politically savvy' cohort is required to meet its own internal challenges and to ensure sustainability in its own workforce, and to be sensitive to the needs of customers and suppliers alike; Need to create a more diversified workforce in the nuclear industry and also plan for new skills evolving from research and development breakthroughs; Need to ensure that Tier 1, 2, 3 and 4 contractors invest in the leadership and skills for the future. World Class - delivery will be benchmarked against UK based multinational companies who operate in a global graduate attraction and development marketplace. The graduates targeted will be from leading institutions and will have a blend of

Creative capstone computer projects for post-graduate students of ...

African Journals Online (AJOL)

With this in mind, the English Department at the University of Stellenbosch has designed a module in its Honours course that allows post-graduate students the opportunity to develop additional skills in the design and development of multimedia projects that effectively combine the knowledge they have gained during the ...

Perspectives on the Past, Present, and Future in Computer-Related Areas as They Impact Academia, Business, and Other Areas

Science.gov (United States)

Snyder, Robin M.

2017-01-01

The author has attended and presented at most ASCUE meetings since 1994, and has worked professionally in research and development, industry, military, government, business, and private and public academia--moving between computer science, software engineering, and business fields at both the undergraduate and graduate level, and even running…

An overview of interactive computer graphics and its application to computer-aided engineering and design

International Nuclear Information System (INIS)

Van Dam, A.

1983-01-01

The purpose of this brief birds-eye view of interactive graphics is to list the key ideas, and to show how one of the most important application areas, Computer Aided Engineering/Design takes advantage of it. (orig.)

Profile of graduates of Israeli medical schools in 1981--2000: educational background, demography and evaluation of medical education programs.

Science.gov (United States)

Bitterman, Noemi; Shalev, Ilana

2005-05-01

disciplines such as law, engineering, computer science, among others.

Strengthening programs in science, engineering and mathematics. Third annual progress report

Energy Technology Data Exchange (ETDEWEB)

Sandhu, S.S.

1997-09-30

The Division of Natural Sciences and Mathematics at Claflin College consists of the Departments of Biology, Chemistry, Computer Science, Physics, Engineering and Mathematics. It offers a variety of major and minor academic programs designed to meet the mission and objectives of the college. The division`s pursuit to achieve excellence in science education is adversely impacted by the poor academic preparation of entering students and the lack of equipment, facilities and research participation, required to impart adequate academic training and laboratory skills to the students. Funds were received from the US Department of Energy to improve the divisional facilities and laboratory equipment and establish mechanism at pre-college and college levels to increase (1) the pool of high school students who will enroll in Science and Mathematics courses (2) the pool of well qualified college freshmen who will seek careers in Science, Engineering and Mathematics (3) the graduation rate in Science,engineering and Mathematics at the undergraduate level and (4) the pool of well-qualified students who can successfully compete to enter the graduate schools of their choice in the fields of science, engineering, and mathematics. The strategies that were used to achieve the mentioned objectives include: (1) Improved Mentoring and Advisement, (2) Summer Science Camp for 7th and 8th graders, (3) Summer Research Internships for Claflin SEM Seniors, (4) Summer Internships for Rising High School Seniors, (5) Development of Mathematical Skills at Pre-college/Post-secondary Levels, (6) Expansion of Undergraduate Seminars, (7) Exposure of Undergraduates to Guest Speakers/Roll Models, (8) Visitations by Undergraduate Students to Graduate Schools, and (9) Expanded Academic Program in Environmental Chemistry.

Computation of Viscous Incompressible Flows

CERN Document Server

Kwak, Dochan

2011-01-01

This monograph is intended as a concise and self-contained guide to practitioners and graduate students for applying approaches in computational fluid dynamics (CFD) to real-world problems that require a quantification of viscous incompressible flows. In various projects related to NASA missions, the authors have gained CFD expertise over many years by developing and utilizing tools especially related to viscous incompressible flows. They are looking at CFD from an engineering perspective, which is especially useful when working on real-world applications. From that point of view, CFD requires two major elements, namely methods/algorithm and engineering/physical modeling. As for the methods, CFD research has been performed with great successes. In terms of modeling/simulation, mission applications require a deeper understanding of CFD and flow physics, which has only been debated in technical conferences and to a limited scope. This monograph fills the gap by offering in-depth examples for students and engine...

Nuclear engineering in the National Polytechnic Institute

International Nuclear Information System (INIS)

Del Valle G, E.

2008-12-01

In the National Polytechnic Institute the bachelor degree in physics and mathematics, consists of 48 subjects in the common trunk. For the nuclear engineering option, from the fifth semester undergoing 9 specific areas within the Nuclear Engineering Department : introduction to nuclear engineering, power cycles thermodynamics, heat transfer, two courses of nuclear reactors theory, two of nuclear engineering, one course of laboratory and other of radiation protection. There is also a master in nuclear engineering aims train human resources in the area of power and research nuclear reactors to meet the needs of the nuclear industry in Mexico, as well as train highly qualified personnel in branches where are used equipment involving radiation and radioisotopes tale as Medicine, Agriculture and Industry. Among its compulsory subjects are: radiation interaction with the matter, measurements laboratory, reactor physics I and II, reactor engineering, reactor laboratory and thesis seminar. Optional, are: engineering of the radiation protection, computers in the nuclear engineering, nuclear systems dynamics, power plants safety, flow in two phases, reliability and risk analysis, nuclear power systems design, neutron transport theory. Many graduates of this degree have been and are involved in various phases of the nuclear project of Laguna Verde. The Nuclear Engineering Department has a subcritical nuclear reactor of light water and natural uranium and one isotopic source of Pu-Be neutrons of 5 Ci. It also has a multichannel analyzers, calibrated sources of alpha, beta and gamma radiation, a gamma spectrometer of high resolution and low background, a specialized library and one data processing center. In relation particularly to radiation protection, it is clear that there is a lack of specialists, as reflected in radiological control problems in areas such as medicine and industry. Given this situation, it is perceived to be required post-graduate studies at Master and Ph

Global Conference on Applied Computing in Science and Engineering

CERN Document Server

2016-01-01

The Global Conference on Applied Computing in Science and Engineering is organized by academics and researchers belonging to different scientific areas of the C3i/Polytechnic Institute of Portalegre (Portugal) and the University of Extremadura (Spain) with the technical support of ScienceKnow Conferences. The event has the objective of creating an international forum for academics, researchers and scientists from worldwide to discuss worldwide results and proposals regarding to the soundest issues related to Applied Computing in Science and Engineering. This event will include the participation of renowned keynote speakers, oral presentations, posters sessions and technical conferences related to the topics dealt with in the Scientific Program as well as an attractive social and cultural program. The papers will be published in the Proceedings e-books. The proceedings of the conference will be sent to possible indexing on Thomson Reuters (selective by Thomson Reuters, not all-inclusive) and Google Scholar...

Computer and engineering calculations of Brazilian Tokamak-II

International Nuclear Information System (INIS)

Wang, S.; Chen, Y.; Sa, W.P. de; Nascimento, I.C.; Tuszel, A.G.; Galvao, R.M.O.; Machida, M.

1990-01-01

Analytical and computer calculations carried out by researches of Physics Institute - University of Sao Paulo (IFUSP), for defining the engineering project and constructing the TBR-II tokamak are presented. The hydrodynamics behavioue and determined parameters for magnetic confinement of the plasma were analysed. The computer code was developed using magnetohydrodynamics (MHD) equations which involve plasma interactions, magnetic field and electrical current circulating in more than 20 coils distributed around toroidal vase of the plasma. The electromagnetic, thermal and mechanical couplings are also presented. The TBR-II will be feed by two turbo-generators with 15 MW each one. (M.C.K.) [pt

Graduate School and You: A Guide for Prospective Graduate Students.

Science.gov (United States)

Kidwell, Clara Sue; LaPidus, Jules B.

This pamphlet guides the college graduate in determining whether graduate school is an appropriate choice in career planning. Chapter titles include: "Why Graduate School?,""What is Graduate Education?,""Preparation for Graduate School,""Career Options with a Graduate Degree,""Making the Decision,""Financing a Graduate Education,""Choosing a…

Mathematics of shape description a morphological approach to image processing and computer graphics

CERN Document Server

Ghosh, Pijush K

2009-01-01

Image processing problems are often not well defined because real images are contaminated with noise and other uncertain factors. In Mathematics of Shape Description, the authors take a mathematical approach to address these problems using the morphological and set-theoretic approach to image processing and computer graphics by presenting a simple shape model using two basic shape operators called Minkowski addition and decomposition. This book is ideal for professional researchers and engineers in Information Processing, Image Measurement, Shape Description, Shape Representation and Computer Graphics. Post-graduate and advanced undergraduate students in pure and applied mathematics, computer sciences, robotics and engineering will also benefit from this book.  Key FeaturesExplains the fundamental and advanced relationships between algebraic system and shape description through the set-theoretic approachPromotes interaction of image processing geochronology and mathematics in the field of algebraic geometryP...

78 FR 61870 - Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting

Science.gov (United States)

2013-10-04

... Committee for Computer and Information Science and Engineering (1115). Date/Time: Oct 31, 2013: 12:30 p.m... NATIONAL SCIENCE FOUNDATION Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended...

Progress of the Computer-Aided Engineering of Electric Drive Vehicle Batteries (CAEBAT) (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Pesaran, A. A.; Han, T.; Hartridge, S.; Shaffer, C.; Kim, G. H.; Pannala, S.

2013-06-01

This presentation, Progress of Computer-Aided Engineering of Electric Drive Vehicle Batteries (CAEBAT) is about simulation and computer-aided engineering (CAE) tools that are widely used to speed up the research and development cycle and reduce the number of build-and-break steps, particularly in the automotive industry. Realizing this, DOE?s Vehicle Technologies Program initiated the CAEBAT project in April 2010 to develop a suite of software tools for designing batteries.

Principles of computational fluid dynamics

CERN Document Server

Wesseling, Pieter

2001-01-01

The book is aimed at graduate students, researchers, engineers and physicists involved in flow computations. An up-to-date account is given of the present state-of-the-art of numerical methods employed in computational fluid dynamics. The underlying numerical principles are treated with a fair amount of detail, using elementary mathematical analysis. Attention is given to difficulties arising from geometric complexity of the flow domain and of nonuniform structured boundary-fitted grids. Uniform accuracy and efficiency for singular perturbation problems is studied, pointing the way to accurate computation of flows at high Reynolds number. Much attention is given to stability analysis, and useful stability conditions are provided, some of them new, for many numerical schemes used in practice. Unified methods for compressible and incompressible flows are discussed. Numerical analysis of the shallow-water equations is included. The theory of hyperbolic conservation laws is treated. Godunov's order barrier and ho...

The Future for Industrial Engineers: Education and Research Opportunities

Science.gov (United States)

Mummolo, Giovanni

2007-01-01

EU graduation and the recruitment of industrial engineers (IEs) have been investigated. An increasing demand is observed for graduates in almost all industrial engineering (IE) subjects. The labour market in the EU is evolving towards the service sector even if manufacturing still represents a significant share of both IE employment and gross…

Computational fluid dynamics applied to flows in an internal combustion engine

Science.gov (United States)

Griffin, M. D.; Diwakar, R.; Anderson, J. D., Jr.; Jones, E.

1978-01-01

The reported investigation is a continuation of studies conducted by Diwakar et al. (1976) and Griffin et al. (1976), who reported the first computational fluid dynamic results for the two-dimensional flowfield for all four strokes of a reciprocating internal combustion (IC) engine cycle. An analysis of rectangular and cylindrical three-dimensional engine models is performed. The working fluid is assumed to be inviscid air of constant specific heats. Calculations are carried out of a four-stroke IC engine flowfield wherein detailed finite-rate chemical combustion of a gasoline-air mixture is included. The calculations remain basically inviscid, except that in some instances thermal conduction is included to allow a more realistic model of the localized sparking of the mixture. All the results of the investigation are obtained by means of an explicity time-dependent finite-difference technique, using a high-speed digital computer.

Nuclear engineering education in the United States

International Nuclear Information System (INIS)

Williamson, T.G.

1982-01-01

In discussing nuclear engineering education in the United States it is shown that the most critical issue facing the nuclear engineering education community today is enrolment in a time of increasing demand for graduate engineers. Related to the issue of enrolment is support for graduate students, whether it be fellowships, traineeships, or research assistantships. Other issues are those of maintaining a vital faculty in the face of a competitive job market, of maintaining research facilities and developing new ones, and of determining the directions of educational efforts in the future. (U.K.)

Computational studies of an intake manifold for restricted engine application

Science.gov (United States)

Prasetyo, Bagus Dwi; Ubaidillah, Maharani, Elliza Tri; Setyohandoko, Gabriel; Idris, Muhammad Idzdihar

2018-02-01

The Formula Society of Automotive Engineer (FSAE) student competition is an international contest for a vehicle that entirely designed and built by students from various universities. The engine design in the Formula SAE competition has to comply a tight regulation. Concerning the engine intake line, an air restrictor of circular cross-section less than 20 mm must be fitted between the throttle valve and the engine inlet. The throat is aimed to limit the engine air flow rate as it strongly influences the volumetric efficiency and then the maximum power. This article focuses on the design of the engine intake system of the Bengawan FSAE team vehicle to optimize the engine power output and its stability. The performance of engine intake system is studied through computational fluid dynamics (CFD). The objective of CFD is to know the pressure, velocity, and airflow of the air intake manifold for the best performance of the engine. The three-dimensional drawing of the intake manifold was made, and CFD simulation was conducted using ANSYS FLUENT. Two models were studied. The result shows that the different design produces a different value of the velocity of airflow and the kind of flow type.

Identifying the challenging factors in the transition from colleges of engineering to employment

Science.gov (United States)

Baytiyeh, Hoda; Naja, Mohamad

2012-03-01

The transition from university to a career in engineering is a challenging process. This study examined the perceptions of engineering graduates regarding the difficulties they encountered in their transition from the university to the workplace. Lebanese practising engineers (n=217), living around the world, were surveyed to identify their current employment situations and their attitudes toward their academic preparation. Factor analysis revealed three main challenges facing engineering graduates: communication; responsibility; self-confidence. Seventeen interviews were conducted to gather information on ways to facilitate this transition. Comments reflected the need for better collaboration between engineering schools and engineering firms. The results will provide insight for engineering colleges, faculty members and administrators into the challenges faced by graduates and their aspirations for a smoother transition into employment.

XVI 'Jacques-Louis Lions' Spanish-French School on Numerical Simulation in Physics and Engineering

CERN Document Server

Roldán, Teo; Torrens, Juan

2016-01-01

This book presents lecture notes from the XVI ‘Jacques-Louis Lions’ Spanish-French School on Numerical Simulation in Physics and Engineering, held in Pamplona (Navarra, Spain) in September 2014. The subjects covered include: numerical analysis of isogeometric methods, convolution quadrature for wave simulations, mathematical methods in image processing and computer vision, modeling and optimization techniques in food processes, bio-processes and bio-systems, and GPU computing for numerical simulation. The book is highly recommended to graduate students in Engineering or Science who want to focus on numerical simulation, either as a research topic or in the field of industrial applications. It can also benefit senior researchers and technicians working in industry who are interested in the use of state-of-the-art numerical techniques in the fields addressed here. Moreover, the book can be used as a textbook for master courses in Mathematics, Physics, or Engineering.

The Relationship of the Supportiveness of the Academic Environment to the Self-Confidence and Assertiveness in Academic Work for Men and Women Graduate Students in Science and Engineering.

Science.gov (United States)

Stansbury, Kendyll

Situational influences on self-confidence and assertiveness in female and male graduate students in science and engineering were studied, based on responses from 328 Stanford University students (155 males and 173 females). Two dependent variables were used: an index of items measuring an individual's self-confidence in the ability to perform…

Numerical time-dependent partial differential equations for scientists and engineers

CERN Document Server

Brio, Moysey; Zakharian, Aramais R

2010-01-01

It is the first text that in addition to standard convergence theory treats other necessary ingredients for successful numerical simulations of physical systems encountered by every practitioner. The book is aimed at users with interests ranging from application modeling to numerical analysis and scientific software development. It is strongly influenced by the authors research in in space physics, electrical and optical engineering, applied mathematics, numerical analysis and professional software development. The material is based on a year-long graduate course taught at the University of Arizona since 1989. The book covers the first two-semesters of a three semester series. The second semester is based on a semester-long project, while the third semester requirement consists of a particular methods course in specific disciplines like computational fluid dynamics, finite element method in mechanical engineering, computational physics, biology, chemistry, photonics, etc. The first three chapters focus on bas...

Canadian conference on electrical and computer engineering proceedings. Congres canadien en genie electrique et informatique

Energy Technology Data Exchange (ETDEWEB)

Bhargava, V K [ed.

1993-01-01

A conference was held on the subject of electrical and computer engineering. Papers were presented on the subjects of artificial intelligence, video, signal processing, radar, power electronics, neural networks, control, computer systems, transportation electronics, software tools, error control coding, electrothermal phenomena, performance evaluation of computer systems, wireless communication, satellite communication, very large scale integration, parallel processing, pattern recognition, telephony, graphs and algorithms, multimedia, broadcast systems, remote sensing, computer networks, modulation and coding, robotics, computer architecture, spread spectrum, image processing, microwave circuits, biomedical engineering, specification and verification, image restoration, communications networks, computer-aided design, drives, energy systems, expert systems, and optics. Separate abstracts have been prepared for 56 papers from the conference.

Intelligent computer systems in engineering design principles and applications

CERN Document Server

Sunnersjo, Staffan

2016-01-01

This introductory book discusses how to plan and build useful, reliable, maintainable and cost efficient computer systems for automated engineering design. The book takes a user perspective and seeks to bridge the gap between texts on principles of computer science and the user manuals for commercial design automation software. The approach taken is top-down, following the path from definition of the design task and clarification of the relevant design knowledge to the development of an operational system well adapted for its purpose. This introductory text for the practicing engineer working in industry covers most vital aspects of planning such a system. Experiences from applications of automated design systems in practice are reviewed based on a large number of real, industrial cases. The principles behind the most popular methods in design automation are presented with sufficient rigour to give the user confidence in applying them on real industrial problems. This book is also suited for a half semester c...

RESEARCH OF ENGINEERING TRAFFIC IN COMPUTER UZ NETWORK USING MPLS TE TECHNOLOGY

Directory of Open Access Journals (Sweden)

V. M. Pakhomovа

2014-12-01

Full Text Available Purpose. In railway transport of Ukraine one requires the use of computer networks of different technologies: Ethernet, Token Bus, Token Ring, FDDI and others. In combined computer networks on the railway transport it is necessary to use packet switching technology in multiprotocol networks MPLS (MultiProtocol Label Switching more effectively. They are based on the use of tags. Packet network must transmit different types of traffic with a given quality of service. The purpose of the research is development a methodology for determining the sequence of destination flows for the considered fragment of computer network of UZ. Methodology. When optimizing traffic management in MPLS networks has the important role of technology traffic engineering (Traffic Engineering, TE. The main mechanism of TE in MPLS is the use of unidirectional tunnels (MPLS TE tunnel to specify the path of the specified traffic. The mathematical model of the problem of traffic engineering in computer network of UZ technology MPLS TE was made. Computer UZ network is represented with the directed graph, their vertices are routers of computer network, and each arc simulates communication between nodes. As an optimization criterion serves the minimum value of the maximum utilization of the TE-tunnel. Findings. The six options destination flows were determined; rational sequence of flows was found, at which the maximum utilization of TE-tunnels considered a simplified fragment of a computer UZ network does not exceed 0.5. Originality. The method of solving the problem of traffic engineering in Multiprotocol network UZ technology MPLS TE was proposed; for different classes its own way is laid, depending on the bandwidth and channel loading. Practical value. Ability to determine the values of the maximum coefficient of use of TE-tunnels in computer UZ networks based on developed software model «TraffEng». The input parameters of the model: number of routers, channel capacity, the

Assistant professor wins grant to help enrich graduate student careers with e-portfolios

OpenAIRE

Mackay, Steven D.

2010-01-01

Lisa McNair, an assistant professor with the department of engineering education, has won a $403,000 National Science Foundation Faculty Early Career Development (CAREER) grant to help engineering graduate students develop as reflective practitioners by using e-portfolios that could enrich their own careers.

Metasynthetic computing and engineering of complex systems

CERN Document Server

Cao, Longbing

2015-01-01

Provides a comprehensive overview and introduction to the concepts, methodologies, analysis, design and applications of metasynthetic computing and engineering. The author: Presents an overview of complex systems, especially open complex giant systems such as the Internet, complex behavioural and social problems, and actionable knowledge discovery and delivery in the big data era. Discusses ubiquitous intelligence in complex systems, including human intelligence, domain intelligence, social intelligence, network intelligence, data intelligence and machine intelligence, and their synergy thro

13th International Conference on Computer Aided Engineering

CERN Document Server

Pietrusiak, Damian

2017-01-01

These proceedings of the 13th International Conference on Computer Aided Engineering present selected papers from the event, which was held in Polanica Zdrój, Poland, from June 22 to 25, 2016. The contributions are organized according to thematic sections on the design and manufacture of machines and technical systems; durability prediction; repairs and retrofitting of power equipment; strength and thermodynamic analyses for power equipment; design and calculation of various types of load-carrying structures; numerical methods for dimensioning materials handling; and long-distance transport equipment. The conference and its proceedings offer a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances in this dynamic field.

Job Prospects for Industrial Engineers.

Science.gov (United States)

Basta, Nicholas

1988-01-01

Discusses 1987 statistics from the College Placement Council regarding new job offers to graduating industrial engineers. Identifies trends in hiring in the field. Describes several issues that will face industrial engineers. States that the industrial engineers most likely to win jobs are those with good basic mathematics and communications…

An Innovative Improvement of Engineering Learning System Using Computational Fluid Dynamics Concept

Science.gov (United States)

Hung, T. C.; Wang, S. K.; Tai, S. W.; Hung, C. T.

2007-01-01

An innovative concept of an electronic learning system has been established in an attempt to achieve a technology that provides engineering students with an instructive and affordable framework for learning engineering-related courses. This system utilizes an existing Computational Fluid Dynamics (CFD) package, Active Server Pages programming,…

Computational intelligence in nuclear engineering

International Nuclear Information System (INIS)

Uhrig, Robert E.; Hines, J. Wesley

2005-01-01

Approaches to several recent issues in the operation of nuclear power plants using computational intelligence are discussed. These issues include 1) noise analysis techniques, 2) on-line monitoring and sensor validation, 3) regularization of ill-posed surveillance and diagnostic measurements, 4) transient identification, 5) artificial intelligence-based core monitoring and diagnostic system, 6) continuous efficiency improvement of nuclear power plants, and 7) autonomous anticipatory control and intelligent-agents. Several Changes to the focus of Computational Intelligence in Nuclear Engineering have occurred in the past few years. With earlier activities focusing on the development of condition monitoring and diagnostic techniques for current nuclear power plants, recent activities have focused on the implementation of those methods and the development of methods for next generation plants and space reactors. These advanced techniques are expected to become increasingly important as current generation nuclear power plants have their licenses extended to 60 years and next generation reactors are being designed to operate for extended fuel cycles (up to 25 years), with less operator oversight, and especially for nuclear plants operating in severe environments such as space or ice-bound locations

Rotation, Reflection, and Frame Changes; Orthogonal tensors in computational engineering mechanics

Science.gov (United States)

Brannon, R. M.

2018-04-01

Whilst vast literature is available for the most common rotation-related tasks such as coordinate changes, most reference books tend to cover one or two methods, and resources for less-common tasks are scarce. Specialized research applications can be found in disparate journal articles, but a self-contained comprehensive review that covers both elementary and advanced concepts in a manner comprehensible to engineers is rare. Rotation, Reflection, and Frame Changes surveys a refreshingly broad range of rotation-related research that is routinely needed in engineering practice. By illustrating key concepts in computer source code, this book stands out as an unusually accessible guide for engineers and scientists in engineering mechanics.

Evaluating Google compute engine with PROOF

International Nuclear Information System (INIS)

Ganis, Gerardo; Panitkin, Sergey

2014-01-01

The advent of private and commercial cloud platforms has opened the question of evaluating the cost-effectiveness of such solution for computing in High Energy Physics . Google Compute Engine (GCE) is a IaaS product launched by Google as an experimental platform during 2012 and now open to the public market. In this contribution we present the results of a set of CPU-intensive and I/O-intensive tests we have run with PROOF on a GCE resources made available by Google for test purposes. We have run tests on large scale PROOF clusters (up to 1000 workers) to study the overall scalability of coordinated multi-process jobs. We have studied and compared the performance of ephemeral and persistent storage with PROOF-Lite on the single machines and of standard PROOF on the whole cluster. We will discuss our results in perspective, in particular with respect to the typical analysis needs of an LHC experiment.

Computer-Aided Software Engineering - An approach to real-time software development

Science.gov (United States)

Walker, Carrie K.; Turkovich, John J.

1989-01-01

A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.

System of Information in Conceptual Maps for students of Computer Engineering.

Directory of Open Access Journals (Sweden)

Lydia Rosa Ríos Rodríguez

2014-06-01

Full Text Available The university students, in their daily activities make some decisions which contribute in their professional formation; in many occasions they don't have the enough help to make it in the best way. The systems of information constitute an important alternative to take into consideration in these cases. This work refers to the experience of the department of Computer Engineering of the University of Sancti Spíritus José Martí Pérez (UNISS in the conception and creation of a system of information for the students of the career Computer Engineering on the discipline Artificial Intelligence which uses the conceptual maps as form of representing the information.

Research in progress at the Institute for Computer Applications in Science and Engineering

Science.gov (United States)

1987-01-01

This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis, and computer science during the period April 1, 1987 through October 1, 1987.

BraX-Ray: an X-ray of the Brazilian computer science graduate programs.

Science.gov (United States)

Digiampietri, Luciano A; Mena-Chalco, Jesús P; Vaz de Melo, Pedro O S; Malheiro, Ana P R; Meira, Dânia N O; Franco, Laryssa F; Oliveira, Leonardo B

2014-01-01

Research productivity assessment is increasingly relevant for allocation of research funds. On one hand, this assessment is challenging because it involves both qualitative and quantitative analysis of several characteristics, most of them subjective in nature. On the other hand, current tools and academic social networks make bibliometric data web-available to everyone for free. Those tools, especially when combined with other data, are able to create a rich environment from which information on research productivity can be extracted. In this context, our work aims at characterizing the Brazilian Computer Science graduate programs and the relationship among themselves. We (i) present views of the programs from different perspectives, (ii) rank the programs according to each perspective and a combination of them, (iii) show correlation between assessment metrics, (iv) discuss how programs relate to another, and (v) infer aspects that boost programs' research productivity. The results indicate that programs with a higher insertion in the coauthorship network topology also possess a higher research productivity between 2004 and 2009.

Engineering in the '90s: Strength in Diversity.

Science.gov (United States)

Troxler, G. William

1989-01-01

Discusses the relative roles of engineering and engineering technology. Questions where the baccalaureate engineering technology graduate fits within the engineering field. Lists four methods to improve marketing engineering to potential students and the public. Presents job production and the international picture. (MVL)

Global Engineering Teams--A Programme Promoting Teamwork in Engineering Design and Manufacturing

Science.gov (United States)

Oladiran, M. T.; Uziak, J.; Eisenberg, M.; Scheffer, C.

2011-01-01

Engineering graduates are expected to possess various competencies categorised into hard and soft skills. The hard skills are acquired through specific coursework, but the soft skills are often treated perfunctorily. Global Engineering Teams (GET) is a programme that promotes project-oriented tasks in virtual student teams working in collaboration…

Sentiment analysis and ontology engineering an environment of computational intelligence

CERN Document Server

Chen, Shyi-Ming

2016-01-01

This edited volume provides the reader with a fully updated, in-depth treatise on the emerging principles, conceptual underpinnings, algorithms and practice of Computational Intelligence in the realization of concepts and implementation of models of sentiment analysis and ontology –oriented engineering. The volume involves studies devoted to key issues of sentiment analysis, sentiment models, and ontology engineering. The book is structured into three main parts. The first part offers a comprehensive and prudently structured exposure to the fundamentals of sentiment analysis and natural language processing. The second part consists of studies devoted to the concepts, methodologies, and algorithmic developments elaborating on fuzzy linguistic aggregation to emotion analysis, carrying out interpretability of computational sentiment models, emotion classification, sentiment-oriented information retrieval, a methodology of adaptive dynamics in knowledge acquisition. The third part includes a plethora of applica...

An Attempt to Improve Students' Presentation Skills via Course of Graduation Research and its Educational Effects

Science.gov (United States)

Yamaguchi, Kenji; Ohtuka, Sigeru; Morita, Shinichi; Matsumoto, Itaru; Yakabe, Masaki; Hayamizu, Yasutaka; Ohtuka, Kouichi

The importance of presentation skills rapidly increases in engineering education in Japan. The authors have applied various teaching-method of presentation skills to the course of graduation research for the fifth-grade students of the mechanical engineering program in Yonago National College of Technology. The lectures including teachers' demonstration and basic skills in presentation have resulted in improvement of students' skills. The meeting for announcing the results of graduation research has been opened to the public in cooperation with the Yonago Chamber of Commerce and Industry to give the students incentives to graduation research as well as presentation. The students have mutually evaluated their presentation to get good opportunities for even self-evaluation. This paper discusses the effects and problems of our educational practice.

Wind Energy Workforce Development: Engineering, Science, & Technology

Energy Technology Data Exchange (ETDEWEB)

Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

2013-03-29

Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Masters degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.

A PC/workstation cluster computing environment for reservoir engineering simulation applications

International Nuclear Information System (INIS)

Hermes, C.E.; Koo, J.

1995-01-01

Like the rest of the petroleum industry, Texaco has been transferring its applications and databases from mainframes to PC's and workstations. This transition has been very positive because it provides an environment for integrating applications, increases end-user productivity, and in general reduces overall computing costs. On the down side, the transition typically results in a dramatic increase in workstation purchases and raises concerns regarding the cost and effective management of computing resources in this new environment. The workstation transition also places the user in a Unix computing environment which, to say the least, can be quite frustrating to learn and to use. This paper describes the approach, philosophy, architecture, and current status of the new reservoir engineering/simulation computing environment developed at Texaco's E and P Technology Dept. (EPTD) in Houston. The environment is representative of those under development at several other large oil companies and is based on a cluster of IBM and Silicon Graphics Intl. (SGI) workstations connected by a fiber-optics communications network and engineering PC's connected to local area networks, or Ethernets. Because computing resources and software licenses are shared among a group of users, the new environment enables the company to get more out of its investments in workstation hardware and software

High Performance Computing in Science and Engineering '99 : Transactions of the High Performance Computing Center

CERN Document Server

Jäger, Willi

2000-01-01

The book contains reports about the most significant projects from science and engineering of the Federal High Performance Computing Center Stuttgart (HLRS). They were carefully selected in a peer-review process and are showcases of an innovative combination of state-of-the-art modeling, novel algorithms and the use of leading-edge parallel computer technology. The projects of HLRS are using supercomputer systems operated jointly by university and industry and therefore a special emphasis has been put on the industrial relevance of results and methods.

STEm Minority Graduate Program

Energy Technology Data Exchange (ETDEWEB)

Nicholas, Kaen E

2012-09-20

ABSTRACT The state of science, technology, engineering and math (STEM) education in the United States has seen some unfavorable assessments over the past decade. In early February, 2010 the House of Representatives heard testimony on undergraduate and graduate education. The message from the panel, which included experts from academia, STEM-based industries, and the National Science Foundation (NSF) was dire and required an urgent response. The experts along with the committee's chairperson, U. S. Representative Daniel Lipinski (D-IL) cited that the complexity of Science, Technology, Engineering, and Mathematics applications and coursework and the methodology utilized to teach these subjects are forcing students out of these disciplines. As the National Academies described in its 2007 report Rising Above the Gathering Storm, successful STEM education is not just an academic pursuit it's a necessity for competing in the knowledge-based economy that the United States had a key role in creating. The potential for action is being made available again as the America COMPETES Act of 2007 is up for reauthorization. Its initial focus was on STEM education at the K-12 levels, but efforts at the undergraduate and graduate levels are needed to retain students to fill the jobs left vacant as baby boomers retire. The Educational Advancement Alliance, Inc. (EAA) has for two decades created programs that have not only addressed the issues of ensuring that students are aptly prepared for college but have focused its efforts over the past decade on increasing the number of students who pursue degrees in STEM disciplines. For the EAA, the introduction of the wonders of science begins at the elementary and middle school level via the Learning Lab, a state-of-the-art mobile science laboratory that visits students in grades 4-6 at the various schools throughout Philadelphia and The Math/Tech Academy which meets on Saturdays for students in grades 5-7. For the past two years

Development of Desktop Computing Applications and Engineering Tools on GPUs

DEFF Research Database (Denmark)

Sørensen, Hans Henrik Brandenborg; Glimberg, Stefan Lemvig; Hansen, Toke Jansen

(GPUs) for high-performance computing applications and software tools in science and engineering, inverse problems, visualization, imaging, dynamic optimization. The goals are to contribute to the development of new state-of-the-art mathematical models and algorithms for maximum throughout performance...

USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOL IN POLLUTION PREVENTION

Science.gov (United States)

Computer-Aided Process Engineering has become established in industry as a design tool. With the establishment of the CAPE-OPEN software specifications for process simulation environments. CAPE-OPEN provides a set of "middleware" standards that enable software developers to acces...

Control-C and ACSL for computer-aided control systems engineering

International Nuclear Information System (INIS)

Schrick, B.; Anex, R.

1986-01-01

A computer-aided engineering package, called CTRL-C, provides an easy-to-use work-bench for the analysis and design of multivariable systems. ACSL, a powerful simulation language, complements CTRL-C and provides a flexible evaluation tool. Combined, the CTRL-C/ACSL package is an interaction environment with a comprehensive set of tools for analysis, design, simulation, and evaluation. A unified software system is possible for engineering analysis and presentation. Recognizing that no software can satisfy all needs, Ctrl-C provides consistent and flexible communication with the operating system and other software, most especially ACSL. CTRL-C and ACSL demonstrate that an interactive environment can be a powerful, accessible, and extensible tool for engineering

Cybersecurity Curriculum Development: Introducing Specialties in a Graduate Program

Science.gov (United States)

Bicak, Ali; Liu, Michelle; Murphy, Diane

2015-01-01

The cybersecurity curriculum has grown dramatically over the past decade: once it was just a couple of courses in a computer science graduate program. Today cybersecurity is introduced at the high school level, incorporated into undergraduate computer science and information systems programs, and has resulted in a variety of cybersecurity-specific…

Summary of research in applied mathematics, numerical analysis and computer science at the Institute for Computer Applications in Science and Engineering

Science.gov (United States)

1984-01-01

Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis and computer science during the period October 1, 1983 through March 31, 1984 is summarized.

UPS fellowships support creative engineering research

OpenAIRE

Crumbley, Liz

2007-01-01

A new $40,000 grant marks the 11th anniversary of support from the United Parcel Service (UPS) Foundation for doctoral fellowships in the Human Factors and Safety Engineering Graduate Program in the Grado Department of Industrial and Systems Engineering (ISE) in the College of Engineering.

Educating Civil Engineers for Developing Countries

Science.gov (United States)

Stanley, D.

1974-01-01

Based on engineering teaching experience in Africa and Asia, ideas are presented on educating civil engineers for developing countries, especially those in Africa. Some of the problems facing educational planners, teachers, and students are addressed, including responsibilities of a newly graduated civil engineer, curriculum development, and…

Engineering embedded systems physics, programs, circuits

CERN Document Server

Hintenaus, Peter

2015-01-01

This is a textbook for graduate and final-year-undergraduate computer-science and electrical-engineering students interested in the hardware and software aspects of embedded and cyberphysical systems design. It is comprehensive and self-contained, covering everything from the basics to case-study implementation. Emphasis is placed on the physical nature of the problem domain and of the devices used. The reader is assumed to be familiar on a theoretical level with mathematical tools like ordinary differential equation and Fourier transforms. In this book these tools will be put to practical use. Engineering Embedded Systems begins by addressing basic material on signals and systems, before introducing to electronics. Treatment of digital electronics accentuating synchronous circuits and including high-speed effects proceeds to micro-controllers, digital signal processors and programmable logic. Peripheral units and decentralized networks are given due weight. The properties of analog circuits and devices like ...

Biomedical imaging graduate curricula and courses: report from the 2005 Whitaker Biomedical Engineering Educational Summit.

Science.gov (United States)

Louie, Angelique; Izatt, Joseph; Ferrara, Katherine

2006-02-01

We present an overview of graduate programs in biomedical imaging that are currently available in the US. Special attention is given to the emerging technologies of molecular imaging and biophotonics. Discussions from the workshop on Graduate Imaging at the 2005 Whitaker Educational Summit meeting are summarized.

A Novel Coupling Pattern in Computational Science and Engineering Software

Science.gov (United States)

Computational science and engineering (CSE) software is written by experts of certain area(s). Due to the specialization,existing CSE software may need to integrate other CSE software systems developed by different groups of experts. Thecoupling problem is one of the challenges f...

A Novel Coupling Pattern in Computational Science and Engineering Software

Science.gov (United States)

Computational science and engineering (CSE) software is written by experts of certain area(s). Due to the specialization, existing CSE software may need to integrate other CSE software systems developed by different groups of experts. The coupling problem is one of the challenges...

The application of computer image analysis in life sciences and environmental engineering

Science.gov (United States)

Mazur, R.; Lewicki, A.; Przybył, K.; Zaborowicz, M.; Koszela, K.; Boniecki, P.; Mueller, W.; Raba, B.

2014-04-01

The main aim of the article was to present research on the application of computer image analysis in Life Science and Environmental Engineering. The authors used different methods of computer image analysis in developing of an innovative biotest in modern biomonitoring of water quality. Created tools were based on live organisms such as bioindicators Lemna minor L. and Hydra vulgaris Pallas as well as computer image analysis method in the assessment of negatives reactions during the exposition of the organisms to selected water toxicants. All of these methods belong to acute toxicity tests and are particularly essential in ecotoxicological assessment of water pollutants. Developed bioassays can be used not only in scientific research but are also applicable in environmental engineering and agriculture in the study of adverse effects on water quality of various compounds used in agriculture and industry.

Reviving Graduate Seminar Series through Non-Technical Presentations

Science.gov (United States)

Madihally, Sundararajan V.

2011-01-01

Most chemical engineering programs that offer M.S. and Ph.D. degrees have a common seminar series for all the graduate students. Many would agree that seminars lack student interest, leading to ineffectiveness. We questioned the possibility of adding value to the seminar series by incorporating non-technical topics that may be more important to…

Underrepresented Racial/Ethnic Minority Graduate Students in Science, Technology, Engineering, and Math (STEM) Disciplines: A Cross Institutional Analysis of their Experiences

Science.gov (United States)

Figueroa, Tanya

Considering the importance of a diverse science, technology, engineering, and math (STEM) research workforce for our country's future, it is troubling that many underrepresented racial minority (URM) students start graduate STEM programs, but do not finish. However, some institutional contexts better position students for degree completion than others. The purpose of this study was to uncover the academic and social experiences, power dynamics, and programmatic/institutional structures URM students face within their graduate STEM programs that hinder or support degree progression. Using a critical socialization framework applied in a cross-comparative qualitative study, I focused on how issues of race, ethnicity, and underrepresentation within the educational contexts shape students' experiences. Data was collected from focus group interviews involving 53 URM graduate students pursuing STEM disciplines across three institution types -- a Predominately White Institution, a Hispanic-Serving Institution, and a Historically Black University. Results demonstrate that when students' relationships with faculty advisors were characterized by benign neglect, students felt lost, wasted time and energy making avoidable mistakes, had less positive views of their experiences, and had more difficulty progressing through classes or research, which could cause them to delay time to degree completion or to leave with a master's degree. Conversely, faculty empowered students when they helped them navigate difficult processes/milestones with regular check-ins, but also allowed students room to make decisions and solve problems independently. Further, faculty set the tone for the overall interactional culture and helping behavior in the classroom and lab contexts; where faculty modeled collaboration and concern for students, peers were likely to do the same. International peers sometimes excluded domestic students both socially and academically, which had a negative affect on

Computational intelligence in time series forecasting theory and engineering applications

CERN Document Server

Palit, Ajoy K

2005-01-01

Foresight in an engineering enterprise can make the difference between success and failure, and can be vital to the effective control of industrial systems. Applying time series analysis in the on-line milieu of most industrial plants has been problematic owing to the time and computational effort required. The advent of soft computing tools offers a solution. The authors harness the power of intelligent technologies individually and in combination. Examples of the particular systems and processes susceptible to each technique are investigated, cultivating a comprehensive exposition of the improvements on offer in quality, model building and predictive control and the selection of appropriate tools from the plethora available. Application-oriented engineers in process control, manufacturing, production industry and research centres will find much to interest them in this book. It is suitable for industrial training purposes, as well as serving as valuable reference material for experimental researchers.

Engineering personnel