CITAstudio: Computation in Architecture 2015

DEFF Research Database (Denmark)

Nicholas, Paul; Ayres, Phil

2016-01-01

CITAstudio yearbook. CITAstudio: Computation in Architecture is a two year International Master's Programme at The Royal Danish Academy of Fine Arts, School of Architecture. With a focus on digital design and material fabrication the programme questions how computation is changing our spatial...

Computer aided design of architecture of degradable tissue engineering scaffolds.

Science.gov (United States)

Heljak, M K; Kurzydlowski, K J; Swieszkowski, W

2017-11-01

One important factor affecting the process of tissue regeneration is scaffold stiffness loss, which should be properly balanced with the rate of tissue regeneration. The aim of the research reported here was to develop a computer tool for designing the architecture of biodegradable scaffolds fabricated by melt-dissolution deposition systems (e.g. Fused Deposition Modeling) to provide the required scaffold stiffness at each stage of degradation/regeneration. The original idea presented in the paper is that the stiffness of a tissue engineering scaffold can be controlled during degradation by means of a proper selection of the diameter of the constituent fibers and the distances between them. This idea is based on the size-effect on degradation of aliphatic polyesters. The presented computer tool combines a genetic algorithm and a diffusion-reaction model of polymer hydrolytic degradation. In particular, we show how to design the architecture of scaffolds made of poly(DL-lactide-co-glycolide) with the required Young's modulus change during hydrolytic degradation.

Memristor-based nanoelectronic computing circuits and architectures

CERN Document Server

Vourkas, Ioannis

2016-01-01

This book considers the design and development of nanoelectronic computing circuits, systems and architectures focusing particularly on memristors, which represent one of today’s latest technology breakthroughs in nanoelectronics. The book studies, explores, and addresses the related challenges and proposes solutions for the smooth transition from conventional circuit technologies to emerging computing memristive nanotechnologies. Its content spans from fundamental device modeling to emerging storage system architectures and novel circuit design methodologies, targeting advanced non-conventional analog/digital massively parallel computational structures. Several new results on memristor modeling, memristive interconnections, logic circuit design, memory circuit architectures, computer arithmetic systems, simulation software tools, and applications of memristors in computing are presented. High-density memristive data storage combined with memristive circuit-design paradigms and computational tools applied t...

On Architectural Acoustics Design using Computer Simulation

DEFF Research Database (Denmark)

Schmidt, Anne Marie Due; Kirkegaard, Poul Henning

2004-01-01

The acoustical quality of a given building, or space within the building, is highly dependent on the architectural design. Architectural acoustics design has in the past been based on simple design rules. However, with a growing complexity in the architectural acoustic and the emergence of potent...... room acoustic simulation programs it is now possible to subjectively analyze and evaluate acoustic properties prior to the actual construction of a facility. With the right tools applied, the acoustic design can become an integrated part of the architectural design process. The aim of the present paper...... this information is discussed. The conclusion of the paper is that the application of acoustical simulation programs is most beneficial in the last of three phases but that an application of the program to the two first phases would be preferable and possible with an improvement of the interface of the program....

Layered Architecture for Quantum Computing

Directory of Open Access Journals (Sweden)

N. Cody Jones

2012-07-01

Full Text Available We develop a layered quantum-computer architecture, which is a systematic framework for tackling the individual challenges of developing a quantum computer while constructing a cohesive device design. We discuss many of the prominent techniques for implementing circuit-model quantum computing and introduce several new methods, with an emphasis on employing surface-code quantum error correction. In doing so, we propose a new quantum-computer architecture based on optical control of quantum dots. The time scales of physical-hardware operations and logical, error-corrected quantum gates differ by several orders of magnitude. By dividing functionality into layers, we can design and analyze subsystems independently, demonstrating the value of our layered architectural approach. Using this concrete hardware platform, we provide resource analysis for executing fault-tolerant quantum algorithms for integer factoring and quantum simulation, finding that the quantum-dot architecture we study could solve such problems on the time scale of days.

Layered architecture for quantum computing

OpenAIRE

Jones, N. Cody; Van Meter, Rodney; Fowler, Austin G.; McMahon, Peter L.; Kim, Jungsang; Ladd, Thaddeus D.; Yamamoto, Yoshihisa

2010-01-01

We develop a layered quantum-computer architecture, which is a systematic framework for tackling the individual challenges of developing a quantum computer while constructing a cohesive device design. We discuss many of the prominent techniques for implementing circuit-model quantum computing and introduce several new methods, with an emphasis on employing surface-code quantum error correction. In doing so, we propose a new quantum-computer architecture based on optical control of quantum dot...

Designing fault-tolerant real-time computer systems with diversified bus architecture for nuclear power plants

International Nuclear Information System (INIS)

Behera, Rajendra Prasad; Murali, N.; Satya Murty, S.A.V.

2014-01-01

Fault-tolerant real-time computer (FT-RTC) systems are widely used to perform safe operation of nuclear power plants (NPP) and safe shutdown in the event of any untoward situation. Design requirements for such systems need high reliability, availability, computational ability for measurement via sensors, control action via actuators, data communication and human interface via keyboard or display. All these attributes of FT-RTC systems are required to be implemented using best known methods such as redundant system design using diversified bus architecture to avoid common cause failure, fail-safe design to avoid unsafe failure and diagnostic features to validate system operation. In this context, the system designer must select efficient as well as highly reliable diversified bus architecture in order to realize fault-tolerant system design. This paper presents a comparative study between CompactPCI bus and Versa Module Eurocard (VME) bus architecture for designing FT-RTC systems with switch over logic system (SOLS) for NPP. (author)

Power-efficient computer architectures recent advances

CERN Document Server

Själander, Magnus; Kaxiras, Stefanos

2014-01-01

As Moore's Law and Dennard scaling trends have slowed, the challenges of building high-performance computer architectures while maintaining acceptable power efficiency levels have heightened. Over the past ten years, architecture techniques for power efficiency have shifted from primarily focusing on module-level efficiencies, toward more holistic design styles based on parallelism and heterogeneity. This work highlights and synthesizes recent techniques and trends in power-efficient computer architecture.Table of Contents: Introduction / Voltage and Frequency Management / Heterogeneity and Sp

Application of Tessellation in Architectural Geometry Design

Science.gov (United States)

Chang, Wei

2018-06-01

Tessellation plays a significant role in architectural geometry design, which is widely used both through history of architecture and in modern architectural design with the help of computer technology. Tessellation has been found since the birth of civilization. In terms of dimensions, there are two- dimensional tessellations and three-dimensional tessellations; in terms of symmetry, there are periodic tessellations and aperiodic tessellations. Besides, some special types of tessellations such as Voronoi Tessellation and Delaunay Triangles are also included. Both Geometry and Crystallography, the latter of which is the basic theory of three-dimensional tessellations, need to be studied. In history, tessellation was applied into skins or decorations in architecture. The development of Computer technology enables tessellation to be more powerful, as seen in surface control, surface display and structure design, etc. Therefore, research on the application of tessellation in architectural geometry design is of great necessity in architecture studies.

Architecture and pervasive Computing when buildings and design artifacts become popular interfaces

DEFF Research Database (Denmark)

Krogh, Peter Gall; Grønbæk, Kaj

2001-01-01

One of the main areas of architecture is buildings design, and we will focus on the impact of pervasive computing in this area. The breakthrough of the Internet has triggered a significant increase in what is often called intelligent buildings 1  in recent years. Due to development in pervasive c...

Models in architectural design

OpenAIRE

Pauwels, Pieter

2017-01-01

Whereas architects and construction specialists used to rely mainly on sketches and physical models as representations of their own cognitive design models, they rely now more and more on computer models. Parametric models, generative models, as-built models, building information models (BIM), and so forth, they are used daily by any practitioner in architectural design and construction. Although processes of abstraction and the actual architectural model-based reasoning itself of course rema...

Developing a Distributed Computing Architecture at Arizona State University.

Science.gov (United States)

Armann, Neil; And Others

1994-01-01

Development of Arizona State University's computing architecture, designed to ensure that all new distributed computing pieces will work together, is described. Aspects discussed include the business rationale, the general architectural approach, characteristics and objectives of the architecture, specific services, and impact on the university…

The Role of Sketch in Architecture Design

Science.gov (United States)

Li, Yanjin; Ning, Wen

2017-06-01

With the continuous development of computer technology, we rely more and more on the computer and pay more and more attention to the final design results, so that we ignore the importance of the sketch. However, the sketch is the most basic and effective way of architecture design. Based on the study of the sketch of Tjibao Cultural Center of sketch, the paper explores the role of sketch in architecture design .

A memory-array architecture for computer vision

Energy Technology Data Exchange (ETDEWEB)

Balsara, P.T.

1989-01-01

With the fast advances in the area of computer vision and robotics there is a growing need for machines that can understand images at a very high speed. A conventional von Neumann computer is not suited for this purpose because it takes a tremendous amount of time to solve most typical image processing problems. Exploiting the inherent parallelism present in various vision tasks can significantly reduce the processing time. Fortunately, parallelism is increasingly affordable as hardware gets cheaper. Thus it is now imperative to study computer vision in a parallel processing framework. The author should first design a computational structure which is well suited for a wide range of vision tasks and then develop parallel algorithms which can run efficiently on this structure. Recent advances in VLSI technology have led to several proposals for parallel architectures for computer vision. In this thesis he demonstrates that a memory array architecture with efficient local and global communication capabilities can be used for high speed execution of a wide range of computer vision tasks. This architecture, called the Access Constrained Memory Array Architecture (ACMAA), is efficient for VLSI implementation because of its modular structure, simple interconnect and limited global control. Several parallel vision algorithms have been designed for this architecture. The choice of vision problems demonstrates the versatility of ACMAA for a wide range of vision tasks. These algorithms were simulated on a high level ACMAA simulator running on the Intel iPSC/2 hypercube, a parallel architecture. The results of this simulation are compared with those of sequential algorithms running on a single hypercube node. Details of the ACMAA processor architecture are also presented.

Conceptual design supporting tool between architectural design office and its client

NARCIS (Netherlands)

Shen, JiangTao

2012-01-01

Accompanied with the continuation of rapid Chinese economic growth through the past decades, I have experienced great changes happened in the architectural design industry. Computer science and various architectural design theories had been widely applied; traditional design institutes, which based

A supportive architecture for CFD-based design optimisation

Science.gov (United States)

Li, Ni; Su, Zeya; Bi, Zhuming; Tian, Chao; Ren, Zhiming; Gong, Guanghong

2014-03-01

Multi-disciplinary design optimisation (MDO) is one of critical methodologies to the implementation of enterprise systems (ES). MDO requiring the analysis of fluid dynamics raises a special challenge due to its extremely intensive computation. The rapid development of computational fluid dynamic (CFD) technique has caused a rise of its applications in various fields. Especially for the exterior designs of vehicles, CFD has become one of the three main design tools comparable to analytical approaches and wind tunnel experiments. CFD-based design optimisation is an effective way to achieve the desired performance under the given constraints. However, due to the complexity of CFD, integrating with CFD analysis in an intelligent optimisation algorithm is not straightforward. It is a challenge to solve a CFD-based design problem, which is usually with high dimensions, and multiple objectives and constraints. It is desirable to have an integrated architecture for CFD-based design optimisation. However, our review on existing works has found that very few researchers have studied on the assistive tools to facilitate CFD-based design optimisation. In the paper, a multi-layer architecture and a general procedure are proposed to integrate different CFD toolsets with intelligent optimisation algorithms, parallel computing technique and other techniques for efficient computation. In the proposed architecture, the integration is performed either at the code level or data level to fully utilise the capabilities of different assistive tools. Two intelligent algorithms are developed and embedded with parallel computing. These algorithms, together with the supportive architecture, lay a solid foundation for various applications of CFD-based design optimisation. To illustrate the effectiveness of the proposed architecture and algorithms, the case studies on aerodynamic shape design of a hypersonic cruising vehicle are provided, and the result has shown that the proposed architecture

Teaching Computer Organization and Architecture Using Simulation and FPGA Applications

OpenAIRE

D. K.M. Al-Aubidy

2007-01-01

This paper presents the design concepts and realization of incorporating micro-operation simulation and FPGA implementation into a teaching tool for computer organization and architecture. This teaching tool helps computer engineering and computer science students to be familiarized practically with computer organization and architecture through the development of their own instruction set, computer programming and interfacing experiments. A two-pass assembler has been designed and implemente...

On architectural acoustic design using computer simulation

DEFF Research Database (Denmark)

Schmidt, Anne Marie Due; Kirkegaard, Poul Henning

2004-01-01

properties prior to the actual construction of a building. With the right tools applied, acoustic design can become an integral part of the architectural design process. The aim of this paper is to investigate the field of application that an acoustic simulation programme can have during an architectural...... acoustic design process. The emphasis is put on the first three out of five phases in the working process of the architect and a case study is carried out in which each phase is represented by typical results ? as exemplified with reference to the design of Bagsværd Church by Jørn Utzon. The paper...... discusses the advantages and disadvantages of the programme in each phase compared to the works of architects not using acoustic simulation programmes. The conclusion of the paper is that the application of acoustic simulation programs is most beneficial in the last of three phases but an application...

Specialized computer architectures for computational aerodynamics

Science.gov (United States)

Stevenson, D. K.

1978-01-01

In recent years, computational fluid dynamics has made significant progress in modelling aerodynamic phenomena. Currently, one of the major barriers to future development lies in the compute-intensive nature of the numerical formulations and the relative high cost of performing these computations on commercially available general purpose computers, a cost high with respect to dollar expenditure and/or elapsed time. Today's computing technology will support a program designed to create specialized computing facilities to be dedicated to the important problems of computational aerodynamics. One of the still unresolved questions is the organization of the computing components in such a facility. The characteristics of fluid dynamic problems which will have significant impact on the choice of computer architecture for a specialized facility are reviewed.

Computational Strategies for the Architectural Design of Bending Active Structures

DEFF Research Database (Denmark)

Tamke, Martin; Nicholas, Paul

2013-01-01

Active bending introduces a new level of integration into the design of architectural structures, and opens up new complexities for the architectural design process. In particular, the introduction of material variation reconfigures the design space. Through the precise specification...

Geometric Computing for Freeform Architecture

KAUST Repository

Wallner, J.; Pottmann, Helmut

2011-01-01

Geometric computing has recently found a new field of applications, namely the various geometric problems which lie at the heart of rationalization and construction-aware design processes of freeform architecture. We report on our work in this area

Digital architecture, wearable computers and providing affinity

DEFF Research Database (Denmark)

Guglielmi, Michel; Johannesen, Hanne Louise

2005-01-01

as the setting for the events of experience. Contemporary architecture is a meta-space residing almost any thinkable field, striving to blur boundaries between art, architecture, design and urbanity and break down the distinction between the material and the user or inhabitant. The presentation for this paper...... will, through research, a workshop and participation in a cumulus competition, focus on the exploration of boundaries between digital architecture, performative space and wearable computers. Our design method in general focuses on the interplay between the performing body and the environment – between...

Compact, open-architecture computed radiography system

International Nuclear Information System (INIS)

Huang, H.K.; Lim, A.; Kangarloo, H.; Eldredge, S.; Loloyan, M.; Chuang, K.S.

1990-01-01

Computed radiography (CR) was introduced in 1982, and its basic system design has not changed. Current CR systems have certain limitations: spatial resolution and signal-to-noise ratios are lower than those of screen-film systems, they are complicated and expensive to build, and they have a closed architecture. The authors of this paper designed and implemented a simpler, lower-cost, compact, open-architecture CR system to overcome some of these limitations. The open-architecture system is a manual-load-single-plate reader that can fit on a desk top. Phosphor images are stored in a local disk and can be sent to any other computer through standard interfaces. Any manufacturer's plate can be read with a scanning time of 90 second for a 35 x 43-cm plate. The standard pixel size is 174 μm and can be adjusted for higher spatial resolution. The data resolution is 12 bits/pixel over an x-ray exposure range of 0.01-100 mR

A "Language Lab" for Architectural Design.

Science.gov (United States)

Mackenzie, Arch; And Others

This paper discusses a "language lab" strategy in which traditional studio learning may be supplemented by language lessons using computer graphics techniques to teach architectural grammar, a body of elements and principles that govern the design of buildings belonging to a particular architectural theory or style. Two methods of…

Computers in Academic Architecture Libraries.

Science.gov (United States)

Willis, Alfred; And Others

1992-01-01

Computers are widely used in architectural research and teaching in U.S. schools of architecture. A survey of libraries serving these schools sought information on the emphasis placed on computers by the architectural curriculum, accessibility of computers to library staff, and accessibility of computers to library patrons. Survey results and…

Generative Algorithmic Techniques for Architectural Design

DEFF Research Database (Denmark)

Larsen, Niels Martin

2012-01-01

Architectural design methodology is expanded through the ability to create bespoke computational methods as integrated parts of the design process. The rapid proliferation of digital production techniques within building industry provides new means for establishing seamless flows between digital...... form-generation and the realisation process. A tendency in recent practice shows an increased focus on developing unique tectonic solutions as a crucial ingredient in the design solution. These converging trajectories form the contextual basis for this thesis. In architectural design, digital tools....... The principles are further developed to form new modes of articulation in architectural design. Certain methods are contributions, which suggest a potential for future use and development. Thus, a method is directed towards bottom-up generation of surface topology through the use of an agentbased logic. Another...

Communication-Oriented Design Space Exploration for Reconfigurable Architectures

Directory of Open Access Journals (Sweden)

Gogniat Guy

2007-01-01

Full Text Available Many academic works in computer engineering focus on reconfigurable architectures and associated tools. Fine-grain architectures, field programmable gate arrays (FPGAs, are the most well-known structures of reconfigurable hardware. Dedicated tools (generic or specific allow for the exploration of their design space to choose the best architecture characteristics and/or to explore the application characteristics. The aim is to increase the synergy between the application and the architecture in order to get the best performance. However, there is no generic tool to perform such an exploration for coarse-grain or heterogeneous-grain architectures, just a small number of very specific tools are able to explore a limited set of architectures. To address this major lack, in this paper we propose a new design space exploration approach adapted to fine- and coarse-grain granularities. Our approach combines algorithmic and architecture explorations. It relies on an automatic estimation tool which computes the communication hierarchical distribution and the architectural processing resources use rate for the architecture under exploration. Such an approach forwards the rapid definition of efficient reconfigurable architectures dedicated to one or several applications.

Computer Assessed Design – A Vehicle of Architectural Communication and a Design Tool

OpenAIRE

Petrovici, Liliana-Mihaela

2012-01-01

In comparison with the limits of the traditional representation tools, the development of the computer graphics constitutes an opportunity to assert architectural values. The differences between communication codes of the architects and public are diminished; the architectural ideas can be represented in a coherent, intelligible and attractive way, so that they get more chances to be materialized according to the thinking of the creator. Concurrently, the graphic software have been improving ...

New design methods for computer aided architecturald design methodology teaching

NARCIS (Netherlands)

Achten, H.H.

2003-01-01

Architects and architectural students are exploring new ways of design using Computer Aided Architectural Design software. This exploration is seldom backed up from a design methodological viewpoint. In this paper, a design methodological framework for reflection on innovate design processes by

Blackboard architecture and qualitative model in a computer aided assistant designed to define computers for HEP computing

International Nuclear Information System (INIS)

Nodarse, F.F.; Ivanov, V.G.

1991-01-01

Using BLACKBOARD architecture and qualitative model, an expert systm was developed to assist the use in defining the computers method for High Energy Physics computing. The COMEX system requires an IBM AT personal computer or compatible with than 640 Kb RAM and hard disk. 5 refs.; 9 figs

VLSI Architectures for Computing DFT's

Science.gov (United States)

Truong, T. K.; Chang, J. J.; Hsu, I. S.; Reed, I. S.; Pei, D. Y.

1986-01-01

Simplifications result from use of residue Fermat number systems. System of finite arithmetic over residue Fermat number systems enables calculation of discrete Fourier transform (DFT) of series of complex numbers with reduced number of multiplications. Computer architectures based on approach suitable for design of very-large-scale integrated (VLSI) circuits for computing DFT's. General approach not limited to DFT's; Applicable to decoding of error-correcting codes and other transform calculations. System readily implemented in VLSI.

Computer architecture technology trends

CERN Document Server

1991-01-01

Please note this is a Short Discount publication. This year's edition of Computer Architecture Technology Trends analyses the trends which are taking place in the architecture of computing systems today. Due to the sheer number of different applications to which computers are being applied, there seems no end to the different adoptions which proliferate. There are, however, some underlying trends which appear. Decision makers should be aware of these trends when specifying architectures, particularly for future applications. This report is fully revised and updated and provides insight in

An Overview of the Most Important Reference Architectures for Cloud Computing

Directory of Open Access Journals (Sweden)

Razvan Daniel ZOTA

2014-01-01

Full Text Available In this paper we have presented the main characteristics of the most important reference archi-tectures designed for the cloud computing environment. Specifically, we have introduced the proposed architectures of the worldwide cloud computing companies like Cisco, IBM and VMware and we also had a look at the National Institute of Standards and Technology (NIST reference architecture which is the starting point for all proposed architectures in the field. As one would expect, the provider dependent reference architectures are written is such a way to suit the services and products of the company, while NIST’s architecture is a more general model with more comprehensive architectural details that we highlighted in this article. In the end of the article we draw out some conclusions regarding the existing reference architectures for cloud computing.

Mapping the Intangible: On Adaptivity and Relational Prototyping in Architectural Design

DEFF Research Database (Denmark)

Bolbroe, Cameline

2016-01-01

In recent years, new computing technologies in architecture have led to the possibility of designing architecture with non-static qualities, which affords the architectural designer with a whole new opportunity space to explore. At the same time, this opportunity space challenges both...... to meet the challenges of designing with adaptivity in architecture, I propose a particular method specifically tailored for adaptive architectural design. The method, relational prototyping, is founded on the idea of inhabitation as an act. Relational prototyping adapts techniques from performance...

The new landscape of parallel computer architecture

International Nuclear Information System (INIS)

Shalf, John

2007-01-01

The past few years has seen a sea change in computer architecture that will impact every facet of our society as every electronic device from cell phone to supercomputer will need to confront parallelism of unprecedented scale. Whereas the conventional multicore approach (2, 4, and even 8 cores) adopted by the computing industry will eventually hit a performance plateau, the highest performance per watt and per chip area is achieved using manycore technology (hundreds or even thousands of cores). However, fully unleashing the potential of the manycore approach to ensure future advances in sustained computational performance will require fundamental advances in computer architecture and programming models that are nothing short of reinventing computing. In this paper we examine the reasons behind the movement to exponentially increasing parallelism, and its ramifications for system design, applications and programming models

The new landscape of parallel computer architecture

Energy Technology Data Exchange (ETDEWEB)

Shalf, John [NERSC Division, Lawrence Berkeley National Laboratory 1 Cyclotron Road, Berkeley California, 94720 (United States)

2007-07-15

The past few years has seen a sea change in computer architecture that will impact every facet of our society as every electronic device from cell phone to supercomputer will need to confront parallelism of unprecedented scale. Whereas the conventional multicore approach (2, 4, and even 8 cores) adopted by the computing industry will eventually hit a performance plateau, the highest performance per watt and per chip area is achieved using manycore technology (hundreds or even thousands of cores). However, fully unleashing the potential of the manycore approach to ensure future advances in sustained computational performance will require fundamental advances in computer architecture and programming models that are nothing short of reinventing computing. In this paper we examine the reasons behind the movement to exponentially increasing parallelism, and its ramifications for system design, applications and programming models.

Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

Science.gov (United States)

2005-04-01

PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

Computational Design Modelling : Proceedings of the Design Modelling Symposium

CERN Document Server

Kilian, Axel; Palz, Norbert; Scheurer, Fabian

2012-01-01

This book publishes the peer-reviewed proceeding of the third Design Modeling Symposium Berlin . The conference constitutes a platform for dialogue on experimental practice and research within the field of computationally informed architectural design. More than 60 leading experts the computational processes within the field of computationally informed architectural design to develop a broader and less exotic building practice that bears more subtle but powerful traces of the complex tool set and approaches we have developed and studied over recent years. The outcome are new strategies for a reasonable and innovative implementation of digital potential in truly innovative and radical design guided by both responsibility towards processes and the consequences they initiate.

Evolutionary design assistants for architecture

Directory of Open Access Journals (Sweden)

N. Onur Sönmez

2015-04-01

Full Text Available In its parallel pursuit of an increased competitivity for design offices and more pleasurable and easier workflows for designers, artificial design intelligence is a technical, intellectual, and political challenge. While human-machine cooperation has become commonplace through Computer Aided Design (CAD tools, a more improved collaboration and better support appear possible only through an endeavor into a kind of artificial design intelligence, which is more sensitive to the human perception of affairs. Considered as part of the broader Computational Design studies, the research program of this quest can be called Artificial / Autonomous / Automated Design (AD. The current available level of Artificial Intelligence (AI for design is limited and a viable aim for current AD would be to develop design assistants that are capable of producing drafts for various design tasks. Thus, the overall aim of this thesis is the development of approaches, techniques, and tools towards artificial design assistants that offer a capability for generating drafts for sub-tasks within design processes. The main technology explored for this aim is Evolutionary Computation (EC, and the target design domain is architecture. The two connected research questions of the study concern, first, the investigation of the ways to develop an architectural design assistant, and secondly, the utilization of EC for the development of such assistants. While developing approaches, techniques, and computational tools for such an assistant, the study also carries out a broad theoretical investigation into the main problems, challenges, and requirements towards such assistants on a rather overall level. Therefore, the research is shaped as a parallel investigation of three main threads interwoven along several levels, moving from a more general level to specific applications. The three research threads comprise, first, theoretical discussions and speculations with regard to both

Scalable Multi-core Architectures Design Methodologies and Tools

CERN Document Server

Jantsch, Axel

2012-01-01

As Moore’s law continues to unfold, two important trends have recently emerged. First, the growth of chip capacity is translated into a corresponding increase of number of cores. Second, the parallalization of the computation and 3D integration technologies lead to distributed memory architectures. This book provides a current snapshot of industrial and academic research, conducted as part of the European FP7 MOSART project, addressing urgent challenges in many-core architectures and application mapping.  It addresses the architectural design of many core chips, memory and data management, power management, design and programming methodologies. It also describes how new techniques have been applied in various industrial case studies. Describes trends towards distributed memory architectures and distributed power management; Integrates Network on Chip with distributed, shared memory architectures; Demonstrates novel design methodologies and frameworks for multi-core design space exploration; Shows how midll...

Computer-aided system design

Science.gov (United States)

Walker, Carrie K.

1991-01-01

A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

Emerging memory technologies design, architecture, and applications

CERN Document Server

2014-01-01

This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits. • Provides a comprehensive reference on designing modern circuits with emerging, non-volatile memory technologies, such as MRAM and PCRAM; • Explores new design opportunities offered by emerging memory technologies, from a holistic perspective; • Describes topics in technology, modeling, architecture and applications; • Enables circuit designers to ex...

Architectural design decisions

NARCIS (Netherlands)

Jansen, Antonius Gradus Johannes

2008-01-01

A software architecture can be considered as the collection of key decisions concerning the design of the software of a system. Knowledge about this design, i.e. architectural knowledge, is key for understanding a software architecture and thus the software itself. Architectural knowledge is mostly

Performance Analysis of Cloud Computing Architectures Using Discrete Event Simulation

Science.gov (United States)

Stocker, John C.; Golomb, Andrew M.

2011-01-01

Cloud computing offers the economic benefit of on-demand resource allocation to meet changing enterprise computing needs. However, the flexibility of cloud computing is disadvantaged when compared to traditional hosting in providing predictable application and service performance. Cloud computing relies on resource scheduling in a virtualized network-centric server environment, which makes static performance analysis infeasible. We developed a discrete event simulation model to evaluate the overall effectiveness of organizations in executing their workflow in traditional and cloud computing architectures. The two part model framework characterizes both the demand using a probability distribution for each type of service request as well as enterprise computing resource constraints. Our simulations provide quantitative analysis to design and provision computing architectures that maximize overall mission effectiveness. We share our analysis of key resource constraints in cloud computing architectures and findings on the appropriateness of cloud computing in various applications.

Electromagnetic Physics Models for Parallel Computing Architectures

Science.gov (United States)

Amadio, G.; Ananya, A.; Apostolakis, J.; Aurora, A.; Bandieramonte, M.; Bhattacharyya, A.; Bianchini, C.; Brun, R.; Canal, P.; Carminati, F.; Duhem, L.; Elvira, D.; Gheata, A.; Gheata, M.; Goulas, I.; Iope, R.; Jun, S. Y.; Lima, G.; Mohanty, A.; Nikitina, T.; Novak, M.; Pokorski, W.; Ribon, A.; Seghal, R.; Shadura, O.; Vallecorsa, S.; Wenzel, S.; Zhang, Y.

2016-10-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well.

Applications of an architecture design and assessment system (ADAS)

Science.gov (United States)

Gray, F. Gail; Debrunner, Linda S.; White, Tennis S.

1988-01-01

A new Architecture Design and Assessment System (ADAS) tool package is introduced, and a range of possible applications is illustrated. ADAS was used to evaluate the performance of an advanced fault-tolerant computer architecture in a modern flight control application. Bottlenecks were identified and possible solutions suggested. The tool was also used to inject faults into the architecture and evaluate the synchronization algorithm, and improvements are suggested. Finally, ADAS was used as a front end research tool to aid in the design of reconfiguration algorithms in a distributed array architecture.

MOMCC: Market-Oriented Architecture for Mobile Cloud Computing Based on Service Oriented Architecture

OpenAIRE

Abolfazli, Saeid; Sanaei, Zohreh; Gani, Abdullah; Shiraz, Muhammad

2012-01-01

The vision of augmenting computing capabilities of mobile devices, especially smartphones with least cost is likely transforming to reality leveraging cloud computing. Cloud exploitation by mobile devices breeds a new research domain called Mobile Cloud Computing (MCC). However, issues like portability and interoperability should be addressed for mobile augmentation which is a non-trivial task using component-based approaches. Service Oriented Architecture (SOA) is a promising design philosop...

Interactive design computation : A case study on quantum design paradigm

NARCIS (Netherlands)

Feng, H.

2013-01-01

The ever-increasing complexity of design processes fosters novel design computation models to be employed in architectural research and design in order to facilitate accurate data processing and refined decision making. These computation models have enabled designers to work with complex geometry

Cellular Automata as a learning process in Architecture and Urban design

DEFF Research Database (Denmark)

Jensen, Mads Brath; Foged, Isak Worre

2014-01-01

. An architectural methodological response to this situation is presented through the development of a conceptual computational design system that allows these dynamics to unfold and to be observed for architectural design decision taking. Reflecting on the development and implementation of a cellular automata based...... design approach on a master level urban design studio this paper will discuss the strategies for dealing with complexity at an urban scale as well as the pedagogical considerations behind applying computational tools and methods to a urban design education....

Efficient universal computing architectures for decoding neural activity.

Directory of Open Access Journals (Sweden)

Benjamin I Rapoport

Full Text Available The ability to decode neural activity into meaningful control signals for prosthetic devices is critical to the development of clinically useful brain- machine interfaces (BMIs. Such systems require input from tens to hundreds of brain-implanted recording electrodes in order to deliver robust and accurate performance; in serving that primary function they should also minimize power dissipation in order to avoid damaging neural tissue; and they should transmit data wirelessly in order to minimize the risk of infection associated with chronic, transcutaneous implants. Electronic architectures for brain- machine interfaces must therefore minimize size and power consumption, while maximizing the ability to compress data to be transmitted over limited-bandwidth wireless channels. Here we present a system of extremely low computational complexity, designed for real-time decoding of neural signals, and suited for highly scalable implantable systems. Our programmable architecture is an explicit implementation of a universal computing machine emulating the dynamics of a network of integrate-and-fire neurons; it requires no arithmetic operations except for counting, and decodes neural signals using only computationally inexpensive logic operations. The simplicity of this architecture does not compromise its ability to compress raw neural data by factors greater than [Formula: see text]. We describe a set of decoding algorithms based on this computational architecture, one designed to operate within an implanted system, minimizing its power consumption and data transmission bandwidth; and a complementary set of algorithms for learning, programming the decoder, and postprocessing the decoded output, designed to operate in an external, nonimplanted unit. The implementation of the implantable portion is estimated to require fewer than 5000 operations per second. A proof-of-concept, 32-channel field-programmable gate array (FPGA implementation of this portion

The Design of a System Architecture for Mobile Multimedia Computers

NARCIS (Netherlands)

Havinga, Paul J.M.

2000-01-01

This chapter discusses the system architecture of a portable computer, called Mobile Digital Companion, which provides support for handling multimedia applications energy efficiently. Because battery life is limited and battery weight is an important factor for the size and the weight of the Mobile

A computer architecture for the implementation of SDL

Energy Technology Data Exchange (ETDEWEB)

Crutcher, L A

1989-01-01

Finite State Machines (FSMs) are a part of well-established automata theory. The FSM model is useful in all stages of system design, from abstract specification to implementation in hardware. The FSM model has been studied as a technique in software design, and the implementation of this type of software considered. The Specification and Description Language (SDL) has been considered in detail as an example of this approach. The complexity of systems designed using SDL warrants their implementation through a programmed computer. A benchmark for the implementation of SDL has been established and the performance of SDL on three particular computer architectures investigated. Performance is judged according to this benchmark and also the ease of implementation, which is related to the confidence of a correct implementation. The implementation on 68000s and transputers is considered as representative of established and state-of-the-art microprocessors respectively. A third architecture that uses a processor that has been proposed specifically for the implementation of SDL is considered as a high-level custom architecture. Analysis and measurements of the benchmark on each architecture indicates that the execution time of SDL decreases by an order of magnitude from the 68000 to the transputer to the custom architecture. The ease of implementation is also greater when the execution time is reduced. A study of some real applications of SDL indicates that the benchmark figures are reflected in user-oriented measures of performance such as data throughput and response time. A high-level architecture such as the one proposed here for SDL can provide benefits in terms of execution time and correctness.

Electromagnetic Physics Models for Parallel Computing Architectures

International Nuclear Information System (INIS)

Amadio, G; Bianchini, C; Iope, R; Ananya, A; Apostolakis, J; Aurora, A; Bandieramonte, M; Brun, R; Carminati, F; Gheata, A; Gheata, M; Goulas, I; Nikitina, T; Bhattacharyya, A; Mohanty, A; Canal, P; Elvira, D; Jun, S Y; Lima, G; Duhem, L

2016-01-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well. (paper)

Layered Architectures for Quantum Computers and Quantum Repeaters

Science.gov (United States)

Jones, Nathan C.

This chapter examines how to organize quantum computers and repeaters using a systematic framework known as layered architecture, where machine control is organized in layers associated with specialized tasks. The framework is flexible and could be used for analysis and comparison of quantum information systems. To demonstrate the design principles in practice, we develop architectures for quantum computers and quantum repeaters based on optically controlled quantum dots, showing how a myriad of technologies must operate synchronously to achieve fault-tolerance. Optical control makes information processing in this system very fast, scalable to large problem sizes, and extendable to quantum communication.

Designing the next generation (fifth generation computers)

International Nuclear Information System (INIS)

Wallich, P.

1983-01-01

A description is given of the designs necessary to develop fifth generation computers. An analysis is offered of problems and developments in parallelism, VLSI, artificial intelligence, knowledge engineering and natural language processing. Software developments are outlined including logic programming, object-oriented programming and exploratory programming. Computer architecture is detailed including concurrent computer architecture

Precision Agriculture Design Method Using a Distributed Computing Architecture on Internet of Things Context

Directory of Open Access Journals (Sweden)

Francisco Javier Ferrández-Pastor

2018-05-01

Full Text Available The Internet of Things (IoT has opened productive ways to cultivate soil with the use of low-cost hardware (sensors/actuators and communication (Internet technologies. Remote equipment and crop monitoring, predictive analytic, weather forecasting for crops or smart logistics and warehousing are some examples of these new opportunities. Nevertheless, farmers are agriculture experts but, usually, do not have experience in IoT applications. Users who use IoT applications must participate in its design, improving the integration and use. In this work, different industrial agricultural facilities are analysed with farmers and growers to design new functionalities based on IoT paradigms deployment. User-centred design model is used to obtain knowledge and experience in the process of introducing technology in agricultural applications. Internet of things paradigms are used as resources to facilitate the decision making. IoT architecture, operating rules and smart processes are implemented using a distributed model based on edge and fog computing paradigms. A communication architecture is proposed using these technologies. The aim is to help farmers to develop smart systems both, in current and new facilities. Different decision trees to automate the installation, designed by the farmer, can be easily deployed using the method proposed in this document.

Precision Agriculture Design Method Using a Distributed Computing Architecture on Internet of Things Context.

Science.gov (United States)

Ferrández-Pastor, Francisco Javier; García-Chamizo, Juan Manuel; Nieto-Hidalgo, Mario; Mora-Martínez, José

2018-05-28

The Internet of Things (IoT) has opened productive ways to cultivate soil with the use of low-cost hardware (sensors/actuators) and communication (Internet) technologies. Remote equipment and crop monitoring, predictive analytic, weather forecasting for crops or smart logistics and warehousing are some examples of these new opportunities. Nevertheless, farmers are agriculture experts but, usually, do not have experience in IoT applications. Users who use IoT applications must participate in its design, improving the integration and use. In this work, different industrial agricultural facilities are analysed with farmers and growers to design new functionalities based on IoT paradigms deployment. User-centred design model is used to obtain knowledge and experience in the process of introducing technology in agricultural applications. Internet of things paradigms are used as resources to facilitate the decision making. IoT architecture, operating rules and smart processes are implemented using a distributed model based on edge and fog computing paradigms. A communication architecture is proposed using these technologies. The aim is to help farmers to develop smart systems both, in current and new facilities. Different decision trees to automate the installation, designed by the farmer, can be easily deployed using the method proposed in this document.

Architectural Geometry and Fabrication-Aware Design

KAUST Repository

Pottmann, Helmut

2013-04-27

Freeform shapes and structures with a high geometric complexity play an increasingly important role in contemporary architecture. While digital models are easily created, the actual fabrication and construction remains a challenge. This is the source of numerous research problems many of which fall into the area of Geometric Computing and form part of a recently emerging research area, called "Architectural Geometry". The present paper provides a short survey of research in Architectural Geometry and shows how this field moves towards a new direction in Geometric Modeling which aims at combining shape design with important aspects of function and fabrication. © 2013 Kim Williams Books, Turin.

Architecture and program structures for a special purpose finite element computer

Energy Technology Data Exchange (ETDEWEB)

Norrie, D.H.; Norrie, C.W.

1983-01-01

The development of very large scale integration (VLSI) has made special-purpose computers economically possible. With such a machine, the loss of flexibility compared with a general-purpose computer can be offset by the increased speed which can be obtained by tailoring the architecture to the particular problem or class of problem. The first kind of special-purpose machine has its architecture modelled on the physical structure of the problem and the second kind has its design tailored to the computational algorithm used. The parallel finite element machine (PARFEM) being designed at the University of Calgary for the solution of finite element problems is of the second kind. Its conceptual design is described and progress to date outlined. 14 references.

Lightgrid-an agile distributed computing architecture for Geant4

International Nuclear Information System (INIS)

Young, Jason; Perry, John O.; Jevremovic, Tatjana

2010-01-01

A light weight grid based computing architecture has been developed to accelerate Geant4 computations on a variety of network architectures. This new software is called LightGrid. LightGrid has a variety of features designed to overcome current limitations on other grid based computing platforms, more specifically, smaller network architectures. By focusing on smaller, local grids, LightGrid is able to simplify the grid computing process with minimal changes to existing Geant4 code. LightGrid allows for integration between Geant4 and MySQL, which both increases flexibility in the grid as well as provides a faster, reliable, and more portable method for accessing results than traditional data storage systems. This unique method of data acquisition allows for more fault tolerant runs as well as instant results from simulations as they occur. The performance increases brought along by using LightGrid allow simulation times to be decreased linearly. LightGrid also allows for pseudo-parallelization with minimal Geant4 code changes.

ATCA for Machines-- Advanced Telecommunications Computing Architecture

Energy Technology Data Exchange (ETDEWEB)

Larsen, R.S.; /SLAC

2008-04-22

The Advanced Telecommunications Computing Architecture is a new industry open standard for electronics instrument modules and shelves being evaluated for the International Linear Collider (ILC). It is the first industrial standard designed for High Availability (HA). ILC availability simulations have shown clearly that the capabilities of ATCA are needed in order to achieve acceptable integrated luminosity. The ATCA architecture looks attractive for beam instruments and detector applications as well. This paper provides an overview of ongoing R&D including application of HA principles to power electronics systems.

HyperCell: A Bio-inspired Design Framework for Real-time Interactive Architectures

Directory of Open Access Journals (Sweden)

Jia-Rey Chang

2018-01-01

Full Text Available This pioneering research focuses on Biomimetic Interactive Architecture using “Computation”, “Embodiment”, and “Biology” to generate an intimate embodied convergence to propose a novel rule-based design framework for creating organic architectures composed of swarm-based intelligent components. Furthermore, the research boldly claims that Interactive Architecture should emerge as the next truly Organic Architecture. As the world and society are dynamically changing, especially in this digital era, the research dares to challenge the Utilitas, Firmitas, and Venustas of the traditional architectural Weltanschauung, and rejects them by adopting the novel notion that architecture should be dynamic, fluid, and interactive. This project reflects a trajectory from the 1960’s with the advent of the avant-garde architectural design group, Archigram, and its numerous intriguing and pioneering visionary projects. Archigram’s non-standard, mobile, and interactive projects profoundly influenced a new generation of architects to explore the connection between technology and their architectural projects. This research continues this trend of exploring novel design thinking and the framework of Interactive Architecture by discovering the interrelationship amongst three major topics: “Computation”, “Embodiment”, and “Biology”. The project aims to elucidate pioneering research combining these three topics in one discourse: “Bio-inspired digital architectural design”. These three major topics will be introduced in this Summary.   “Computation”, is any type of calculation that includes both arithmetical and nonarithmetical steps and follows a well-defined model understood and described as, for example, an algorithm. But, in this research, refers to the use of data storage, parametric design application, and physical computing for developing informed architectural designs. “Form” has always been the most critical focus in

Experiencing a Problem-Based Learning Approach for Teaching Reconfigurable Architecture Design

Directory of Open Access Journals (Sweden)

Erwan Fabiani

2009-01-01

Full Text Available This paper presents the “reconfigurable computing” teaching part of a computer science master course (first year on parallel architectures. The practical work sessions of this course rely on active pedagogy using problem-based learning, focused on designing a reconfigurable architecture for the implementation of an application class of image processing algorithms. We show how the successive steps of this project permit the student to experiment with several fundamental concepts of reconfigurable computing at different levels. Specific experiments include exploitation of architectural parallelism, dataflow and communicating component-based design, and configurability-specificity tradeoffs.

On the Architectural Engineering Competences in Architectural Design

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning

2007-01-01

In 1997 a new education in Architecture & Design at Department of Architecture and Design, Aalborg University was started with 50 students. During the recent years this number has increased to approximately 100 new students each year, i.e. approximately 500 students are following the 3 years...... bachelor (BSc) and the 2 years master (MSc) programme. The first 5 semesters are common for all students followed by 5 semesters with specialization into Architectural Design, Urban Design, Industrial Design or Digital Design. The present paper gives a short summary of the architectural engineering...

''Beauty of Wholeness and Beauty of Partiality.'' New Terms Defining the Concept of Beauty in Architecture in Terms of Sustainability and Computer Aided Design

Science.gov (United States)

Farid, Ayman A.; Zaghloul, Weaam M.; Dewidar, Khaled M.

2014-01-01

The great shift in sustainability and computer aided design in the field of architecture caused a remarkable change in the architecture philosophy, new aspects of beauty and aesthetic values are being introduced, and traditional definitions for beauty cannot fully cover this aspects, which causes a gap between; new architecture works criticism and…

ATCA for Machines-- Advanced Telecommunications Computing Architecture

International Nuclear Information System (INIS)

Larsen, R

2008-01-01

The Advanced Telecommunications Computing Architecture is a new industry open standard for electronics instrument modules and shelves being evaluated for the International Linear Collider (ILC). It is the first industrial standard designed for High Availability (HA). ILC availability simulations have shown clearly that the capabilities of ATCA are needed in order to achieve acceptable integrated luminosity. The ATCA architecture looks attractive for beam instruments and detector applications as well. This paper provides an overview of ongoing R and D including application of HA principles to power electronics systems

Savannah River Site computing architecture

Energy Technology Data Exchange (ETDEWEB)

1991-03-29

A computing architecture is a framework for making decisions about the implementation of computer technology and the supporting infrastructure. Because of the size, diversity, and amount of resources dedicated to computing at the Savannah River Site (SRS), there must be an overall strategic plan that can be followed by the thousands of site personnel who make decisions daily that directly affect the SRS computing environment and impact the site's production and business systems. This plan must address the following requirements: There must be SRS-wide standards for procurement or development of computing systems (hardware and software). The site computing organizations must develop systems that end users find easy to use. Systems must be put in place to support the primary function of site information workers. The developers of computer systems must be given tools that automate and speed up the development of information systems and applications based on computer technology. This document describes a proposal for a site-wide computing architecture that addresses the above requirements. In summary, this architecture is standards-based data-driven, and workstation-oriented with larger systems being utilized for the delivery of needed information to users in a client-server relationship.

Savannah River Site computing architecture

Energy Technology Data Exchange (ETDEWEB)

1991-03-29

A computing architecture is a framework for making decisions about the implementation of computer technology and the supporting infrastructure. Because of the size, diversity, and amount of resources dedicated to computing at the Savannah River Site (SRS), there must be an overall strategic plan that can be followed by the thousands of site personnel who make decisions daily that directly affect the SRS computing environment and impact the site`s production and business systems. This plan must address the following requirements: There must be SRS-wide standards for procurement or development of computing systems (hardware and software). The site computing organizations must develop systems that end users find easy to use. Systems must be put in place to support the primary function of site information workers. The developers of computer systems must be given tools that automate and speed up the development of information systems and applications based on computer technology. This document describes a proposal for a site-wide computing architecture that addresses the above requirements. In summary, this architecture is standards-based data-driven, and workstation-oriented with larger systems being utilized for the delivery of needed information to users in a client-server relationship.

Hybrid parallel computing architecture for multiview phase shifting

Science.gov (United States)

Zhong, Kai; Li, Zhongwei; Zhou, Xiaohui; Shi, Yusheng; Wang, Congjun

2014-11-01

The multiview phase-shifting method shows its powerful capability in achieving high resolution three-dimensional (3-D) shape measurement. Unfortunately, this ability results in very high computation costs and 3-D computations have to be processed offline. To realize real-time 3-D shape measurement, a hybrid parallel computing architecture is proposed for multiview phase shifting. In this architecture, the central processing unit can co-operate with the graphic processing unit (GPU) to achieve hybrid parallel computing. The high computation cost procedures, including lens distortion rectification, phase computation, correspondence, and 3-D reconstruction, are implemented in GPU, and a three-layer kernel function model is designed to simultaneously realize coarse-grained and fine-grained paralleling computing. Experimental results verify that the developed system can perform 50 fps (frame per second) real-time 3-D measurement with 260 K 3-D points per frame. A speedup of up to 180 times is obtained for the performance of the proposed technique using a NVIDIA GT560Ti graphics card rather than a sequential C in a 3.4 GHZ Inter Core i7 3770.

Design and Training of Limited-Interconnect Architectures

Science.gov (United States)

1991-07-16

and signal processing. Neuromorphic (brain like) models, allow an alternative for achieving real-time operation tor such tasks, while having a...compact and robust architecture. Neuromorphic models consist of interconnections of simple computational nodes. In this approach, each node computes a...operational performance. I1. Research Objectives The research objectives were: 1. Development of on- chip local training rules specifically designed for

Integrating Computing Resources: A Shared Distributed Architecture for Academics and Administrators.

Science.gov (United States)

Beltrametti, Monica; English, Will

1994-01-01

Development and implementation of a shared distributed computing architecture at the University of Alberta (Canada) are described. Aspects discussed include design of the architecture, users' views of the electronic environment, technical and managerial challenges, and the campuswide human infrastructures needed to manage such an integrated…

Integrating acoustic analysis in the architectural design process using parametric modelling

DEFF Research Database (Denmark)

Peters, Brady

2011-01-01

This paper discusses how parametric modeling techniques can be used to provide architectural designers with a better understanding of the acoustic performance of their designs and provide acoustic engineers with models that can be analyzed using computational acoustic analysis software. Architects......, acoustic performance can inform the geometry and material logic of the design. In this way, the architectural design and the acoustic analysis model become linked....

Field-programmable custom computing technology architectures, tools, and applications

CERN Document Server

Luk, Wayne; Pocek, Ken

2000-01-01

Field-Programmable Custom Computing Technology: Architectures, Tools, and Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In seven selected chapters, the book describes the latest advances in architectures, design methods, and applications of field-programmable devices for high-performance reconfigurable systems. The contributors to this work were selected from the leading researchers and practitioners in the field. It will be valuable to anyone working or researching in the field of custom computing technology. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.

Three-dimensional design methodologies for tree-based FPGA architecture

CERN Document Server

Pangracious, Vinod; Mehrez, Habib

2015-01-01

This book focuses on the development of 3D design and implementation methodologies for Tree-based FPGA architecture. It also stresses the needs for new and augmented 3D CAD tools to support designs such as, the design for 3D, to manufacture high performance 3D integrated circuits and reconfigurable FPGA-based systems. This book was written as a text that covers the foundations of 3D integrated system design and FPGA architecture design. It was written for the use in an elective or core course at the graduate level in field of Electrical Engineering, Computer Engineering and Doctoral Research programs. No previous background on 3D integration is required, nevertheless fundamental understanding of 2D CMOS VLSI design is required. It is assumed that reader has taken the core curriculum in Electrical Engineering or Computer Engineering, with courses like CMOS VLSI design, Digital System Design and Microelectronics Circuits being the most important. It is accessible for self-study by both senior students and profe...

Cultural schema and design activity in an architectural design studio

Directory of Open Access Journals (Sweden)

Gökçe Ketizmen Önal

2017-06-01

Full Text Available Research on the cognitive activities and on the structure and quality of knowledge flow involved in architectural design education is increasing. These studies generally focus on the interaction between student and instructor, including processes such as producing ideas, solving display problems, and integrating design strategies. These studies commonly include computational evaluations and confirmation of the coding of knowledge. They may also include the determination of designer׳s thoughts and cognitive actions of design process, as well as the analysis and digitization of verbal protocols during the design process. In most of these studies, the designer׳s cultural and psychological components are not considered. Accordingly, research on the effects of designers’ cultural schema on design activity in design studios is limited. This study aimed to solve this problem by analyzing the relationship between design activity and the designer׳s cultural schema in a design studio. We performed an experimental study based on a specific conceptual framework and a research model aimed at identifying the relationships among cultural schemas, the architectural design process, and design studios.

Architectures for single-chip image computing

Science.gov (United States)

Gove, Robert J.

1992-04-01

This paper will focus on the architectures of VLSI programmable processing components for image computing applications. TI, the maker of industry-leading RISC, DSP, and graphics components, has developed an architecture for a new-generation of image processors capable of implementing a plurality of image, graphics, video, and audio computing functions. We will show that the use of a single-chip heterogeneous MIMD parallel architecture best suits this class of processors--those which will dominate the desktop multimedia, document imaging, computer graphics, and visualization systems of this decade.

Heavy Lift Vehicle (HLV) Avionics Flight Computing Architecture Study

Science.gov (United States)

Hodson, Robert F.; Chen, Yuan; Morgan, Dwayne R.; Butler, A. Marc; Sdhuh, Joseph M.; Petelle, Jennifer K.; Gwaltney, David A.; Coe, Lisa D.; Koelbl, Terry G.; Nguyen, Hai D.

2011-01-01

A NASA multi-Center study team was assembled from LaRC, MSFC, KSC, JSC and WFF to examine potential flight computing architectures for a Heavy Lift Vehicle (HLV) to better understand avionics drivers. The study examined Design Reference Missions (DRMs) and vehicle requirements that could impact the vehicles avionics. The study considered multiple self-checking and voting architectural variants and examined reliability, fault-tolerance, mass, power, and redundancy management impacts. Furthermore, a goal of the study was to develop the skills and tools needed to rapidly assess additional architectures should requirements or assumptions change.

Simulation system architecture design for generic communications link

Science.gov (United States)

Tsang, Chit-Sang; Ratliff, Jim

1986-01-01

This paper addresses a computer simulation system architecture design for generic digital communications systems. It addresses the issues of an overall system architecture in order to achieve a user-friendly, efficient, and yet easily implementable simulation system. The system block diagram and its individual functional components are described in detail. Software implementation is discussed with the VAX/VMS operating system used as a target environment.

Architecture independent environment for developing engineering software on MIMD computers

Science.gov (United States)

Valimohamed, Karim A.; Lopez, L. A.

1990-01-01

Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

Fast semivariogram computation using FPGA architectures

Science.gov (United States)

Lagadapati, Yamuna; Shirvaikar, Mukul; Dong, Xuanliang

2015-02-01

The semivariogram is a statistical measure of the spatial distribution of data and is based on Markov Random Fields (MRFs). Semivariogram analysis is a computationally intensive algorithm that has typically seen applications in the geosciences and remote sensing areas. Recently, applications in the area of medical imaging have been investigated, resulting in the need for efficient real time implementation of the algorithm. The semivariogram is a plot of semivariances for different lag distances between pixels. A semi-variance, γ(h), is defined as the half of the expected squared differences of pixel values between any two data locations with a lag distance of h. Due to the need to examine each pair of pixels in the image or sub-image being processed, the base algorithm complexity for an image window with n pixels is O(n2). Field Programmable Gate Arrays (FPGAs) are an attractive solution for such demanding applications due to their parallel processing capability. FPGAs also tend to operate at relatively modest clock rates measured in a few hundreds of megahertz, but they can perform tens of thousands of calculations per clock cycle while operating in the low range of power. This paper presents a technique for the fast computation of the semivariogram using two custom FPGA architectures. The design consists of several modules dedicated to the constituent computational tasks. A modular architecture approach is chosen to allow for replication of processing units. This allows for high throughput due to concurrent processing of pixel pairs. The current implementation is focused on isotropic semivariogram computations only. Anisotropic semivariogram implementation is anticipated to be an extension of the current architecture, ostensibly based on refinements to the current modules. The algorithm is benchmarked using VHDL on a Xilinx XUPV5-LX110T development Kit, which utilizes the Virtex5 FPGA. Medical image data from MRI scans are utilized for the experiments

Design and development of a run-time monitor for multi-core architectures in cloud computing.

Science.gov (United States)

Kang, Mikyung; Kang, Dong-In; Crago, Stephen P; Park, Gyung-Leen; Lee, Junghoon

2011-01-01

Cloud computing is a new information technology trend that moves computing and data away from desktops and portable PCs into large data centers. The basic principle of cloud computing is to deliver applications as services over the Internet as well as infrastructure. A cloud is a type of parallel and distributed system consisting of a collection of inter-connected and virtualized computers that are dynamically provisioned and presented as one or more unified computing resources. The large-scale distributed applications on a cloud require adaptive service-based software, which has the capability of monitoring system status changes, analyzing the monitored information, and adapting its service configuration while considering tradeoffs among multiple QoS features simultaneously. In this paper, we design and develop a Run-Time Monitor (RTM) which is a system software to monitor the application behavior at run-time, analyze the collected information, and optimize cloud computing resources for multi-core architectures. RTM monitors application software through library instrumentation as well as underlying hardware through a performance counter optimizing its computing configuration based on the analyzed data.

Design and Development of a Run-Time Monitor for Multi-Core Architectures in Cloud Computing

Directory of Open Access Journals (Sweden)

Junghoon Lee

2011-03-01

Full Text Available Cloud computing is a new information technology trend that moves computing and data away from desktops and portable PCs into large data centers. The basic principle of cloud computing is to deliver applications as services over the Internet as well as infrastructure. A cloud is a type of parallel and distributed system consisting of a collection of inter-connected and virtualized computers that are dynamically provisioned and presented as one or more unified computing resources. The large-scale distributed applications on a cloud require adaptive service-based software, which has the capability of monitoring system status changes, analyzing the monitored information, and adapting its service configuration while considering tradeoffs among multiple QoS features simultaneously. In this paper, we design and develop a Run-Time Monitor (RTM which is a system software to monitor the application behavior at run-time, analyze the collected information, and optimize cloud computing resources for multi-core architectures. RTM monitors application software through library instrumentation as well as underlying hardware through a performance counter optimizing its computing configuration based on the analyzed data.

The Use of Computer Tools in the Design Process of Students’ Architectural Projects. Case Studies in Algeria

Science.gov (United States)

Saighi, Ouafa; Salah Zerouala, Mohamed

2017-12-01

This The paper particularly deals with the way in which computer tools are used by students in their design studio’s projects. Four institutions of architecture education in Algeria are considered as a case study to evaluate the impact of such tools on student design process. This aims to inspect in depth such use, to sort out its advantages and shortcomings in order to suggest some solutions. A field survey was undertaken on a sample of students and their teachers at the same institutions. The analysed results mainly show that computer tools are highly focusing on improving the quality of drawings representation and images seeking observers’ satisfaction hence influencing their decision. Some teachers are not very keen to overuse the computer during the design phase; they prefer the “traditional” approach. This is the present situation that Algerian university is facing which leads to conflict and disagreement between students and teachers. Meanwhile, there was no doubt that computer tools have effectively contributed to improve the competitive level among students.

Applications of parallel computer architectures to the real-time simulation of nuclear power systems

International Nuclear Information System (INIS)

Doster, J.M.; Sills, E.D.

1988-01-01

In this paper the authors report on efforts to utilize parallel computer architectures for the thermal-hydraulic simulation of nuclear power systems and current research efforts toward the development of advanced reactor operator aids and control systems based on this new technology. Many aspects of reactor thermal-hydraulic calculations are inherently parallel, and the computationally intensive portions of these calculations can be effectively implemented on modern computers. Timing studies indicate faster-than-real-time, high-fidelity physics models can be developed when the computational algorithms are designed to take advantage of the computer's architecture. These capabilities allow for the development of novel control systems and advanced reactor operator aids. Coupled with an integral real-time data acquisition system, evolving parallel computer architectures can provide operators and control room designers improved control and protection capabilities. Current research efforts are currently under way in this area

Computer programming and architecture the VAX

CERN Document Server

Levy, Henry

2014-01-01

Takes a unique systems approach to programming and architecture of the VAXUsing the VAX as a detailed example, the first half of this book offers a complete course in assembly language programming. The second describes higher-level systems issues in computer architecture. Highlights include the VAX assembler and debugger, other modern architectures such as RISCs, multiprocessing and parallel computing, microprogramming, caches and translation buffers, and an appendix on the Berkeley UNIX assembler.

A Web Centric Architecture for Deploying Multi-Disciplinary Engineering Design Processes

Science.gov (United States)

Woyak, Scott; Kim, Hongman; Mullins, James; Sobieszczanski-Sobieski, Jaroslaw

2004-01-01

There are continuous needs for engineering organizations to improve their design process. Current state of the art techniques use computational simulations to predict design performance, and optimize it through advanced design methods. These tools have been used mostly by individual engineers. This paper presents an architecture for achieving results at an organization level beyond individual level. The next set of gains in process improvement will come from improving the effective use of computers and software within a whole organization, not just for an individual. The architecture takes advantage of state of the art capabilities to produce a Web based system to carry engineering design into the future. To illustrate deployment of the architecture, a case study for implementing advanced multidisciplinary design optimization processes such as Bi-Level Integrated System Synthesis is discussed. Another example for rolling-out a design process for Design for Six Sigma is also described. Each example explains how an organization can effectively infuse engineering practice with new design methods and retain the knowledge over time.

A computer architecture for intelligent machines

Science.gov (United States)

Lefebvre, D. R.; Saridis, G. N.

1992-01-01

The theory of intelligent machines proposes a hierarchical organization for the functions of an autonomous robot based on the principle of increasing precision with decreasing intelligence. An analytic formulation of this theory using information-theoretic measures of uncertainty for each level of the intelligent machine has been developed. The authors present a computer architecture that implements the lower two levels of the intelligent machine. The architecture supports an event-driven programming paradigm that is independent of the underlying computer architecture and operating system. Execution-level controllers for motion and vision systems are briefly addressed, as well as the Petri net transducer software used to implement coordination-level functions. A case study illustrates how this computer architecture integrates real-time and higher-level control of manipulator and vision systems.

Geometric Computing for Freeform Architecture

KAUST Repository

Wallner, J.

2011-06-03

Geometric computing has recently found a new field of applications, namely the various geometric problems which lie at the heart of rationalization and construction-aware design processes of freeform architecture. We report on our work in this area, dealing with meshes with planar faces and meshes which allow multilayer constructions (which is related to discrete surfaces and their curvatures), triangles meshes with circle-packing properties (which is related to conformal uniformization), and with the paneling problem. We emphasize the combination of numerical optimization and geometric knowledge.

Towards an architectural design system based on generic representations

NARCIS (Netherlands)

Pranovich, S.; Achten, H.H.; Wijk, van J.J.; Gero, J.S.

2002-01-01

Computer Aided Architectural Design systems offer a broad scope of drawing and modeling techniques for the designer. Nevertheless, they offer limited support for the early phases of the design process. One reason is that the level of abstraction is too low: the user can define walls and such in

Advanced Topology Optimization Methods for Conceptual Architectural Design

DEFF Research Database (Denmark)

Aage, Niels; Amir, Oded; Clausen, Anders

2015-01-01

This paper presents a series of new, advanced topology optimization methods, developed specifically for conceptual architectural design of structures. The proposed computational procedures are implemented as components in the framework of a Grasshopper plugin, providing novel capacities...

Advanced Topology Optimization Methods for Conceptual Architectural Design

DEFF Research Database (Denmark)

Aage, Niels; Amir, Oded; Clausen, Anders

2014-01-01

This paper presents a series of new, advanced topology optimization methods, developed specifically for conceptual architectural design of structures. The proposed computational procedures are implemented as components in the framework of a Grasshopper plugin, providing novel capacities...

Design of the RISC-V Instruction Set Architecture

OpenAIRE

Waterman, Andrew Shell

2016-01-01

The hardware-software interface, embodied in the instruction set architecture (ISA), is arguably the most important interface in a computer system. Yet, in contrast to nearly all other interfaces in a modern computer system, all commercially popular ISAs are proprietary. A free and open ISA standard has the potential to increase innovation in microprocessor design, reduce computer system cost, and, as Moore’s law wanes, ease the transition to more specialized computational devices.In this d...

Computer aid in solar architecture

Energy Technology Data Exchange (ETDEWEB)

Rosendahl, E W

1982-02-01

Among architects the question is being discussed in how far new buildings can be designed in a way to make more economical use of energy by architectural means. Solar houses in the USA are often taken as a model. As yet it is unclear how such measures will affect heat demand in the central European climate and with domestic building materials being used. A computer simulation program is introduced by which these questions can be answered as early as in the stage of planning. The program can be run on a common microcomputersystem.

Computational Design of Urban Layouts

KAUST Repository

Wonka, Peter

2015-10-07

A fundamental challenge in computational design is to compute layouts by arranging a set of shapes. In this talk I will present recent urban modeling projects with applications in computer graphics, urban planning, and architecture. The talk will look at different scales of urban modeling (streets, floorplans, parcels). A common challenge in all these modeling problems are functional and aesthetic constraints that should be respected. The talk also highlights interesting links to geometry processing problems, such as field design and quad meshing.

Outline of a novel architecture for cortical computation.

Science.gov (United States)

Majumdar, Kaushik

2008-03-01

In this paper a novel architecture for cortical computation has been proposed. This architecture is composed of computing paths consisting of neurons and synapses. These paths have been decomposed into lateral, longitudinal and vertical components. Cortical computation has then been decomposed into lateral computation (LaC), longitudinal computation (LoC) and vertical computation (VeC). It has been shown that various loop structures in the cortical circuit play important roles in cortical computation as well as in memory storage and retrieval, keeping in conformity with the molecular basis of short and long term memory. A new learning scheme for the brain has also been proposed and how it is implemented within the proposed architecture has been explained. A few mathematical results about the architecture have been proposed, some of which are without proof.

Neural architecture design based on extreme learning machine.

Science.gov (United States)

Bueno-Crespo, Andrés; García-Laencina, Pedro J; Sancho-Gómez, José-Luis

2013-12-01

Selection of the optimal neural architecture to solve a pattern classification problem entails to choose the relevant input units, the number of hidden neurons and its corresponding interconnection weights. This problem has been widely studied in many research works but their solutions usually involve excessive computational cost in most of the problems and they do not provide a unique solution. This paper proposes a new technique to efficiently design the MultiLayer Perceptron (MLP) architecture for classification using the Extreme Learning Machine (ELM) algorithm. The proposed method provides a high generalization capability and a unique solution for the architecture design. Moreover, the selected final network only retains those input connections that are relevant for the classification task. Experimental results show these advantages. Copyright © 2013 Elsevier Ltd. All rights reserved.

The NILE system architecture: fault-tolerant, wide-area access to computing and data resources

International Nuclear Information System (INIS)

Ricciardi, Aleta; Ogg, Michael; Rothfus, Eric

1996-01-01

NILE is a multi-disciplinary project building a distributed computing environment for HEP. It provides wide-area, fault-tolerant, integrated access to processing and data resources for collaborators of the CLEO experiment, though the goals and principles are applicable to many domains. NILE has three main objectives: a realistic distributed system architecture design, the design of a robust data model, and a Fast-Track implementation providing a prototype design environment which will also be used by CLEO physicists. This paper focuses on the software and wide-area system architecture design and the computing issues involved in making NILE services highly-available. (author)

Synthesis-Based Software Architecture Design

NARCIS (Netherlands)

Tekinerdogan, B.; Aksit, Mehmet; Aksit, Mehmet

2001-01-01

During the last decade several architecture design approaches have been introduced. These approaches however have to cope with several obstacles and software architecture design remains a difficult problem. To cope with these obstacles this chapter introduces a novel architecture design approach.

Resilient computer system design

CERN Document Server

Castano, Victor

2015-01-01

This book presents a paradigm for designing new generation resilient and evolving computer systems, including their key concepts, elements of supportive theory, methods of analysis and synthesis of ICT with new properties of evolving functioning, as well as implementation schemes and their prototyping. The book explains why new ICT applications require a complete redesign of computer systems to address challenges of extreme reliability, high performance, and power efficiency. The authors present a comprehensive treatment for designing the next generation of computers, especially addressing safety-critical, autonomous, real time, military, banking, and wearable health care systems.   §  Describes design solutions for new computer system - evolving reconfigurable architecture (ERA) that is free from drawbacks inherent in current ICT and related engineering models §  Pursues simplicity, reliability, scalability principles of design implemented through redundancy and re-configurability; targeted for energy-,...

Fast underdetermined BSS architecture design methodology for real time applications.

Science.gov (United States)

Mopuri, Suresh; Reddy, P Sreenivasa; Acharyya, Amit; Naik, Ganesh R

2015-01-01

In this paper, we propose a high speed architecture design methodology for the Under-determined Blind Source Separation (UBSS) algorithm using our recently proposed high speed Discrete Hilbert Transform (DHT) targeting real time applications. In UBSS algorithm, unlike the typical BSS, the number of sensors are less than the number of the sources, which is of more interest in the real time applications. The DHT architecture has been implemented based on sub matrix multiplication method to compute M point DHT, which uses N point architecture recursively and where M is an integer multiples of N. The DHT architecture and state of the art architecture are coded in VHDL for 16 bit word length and ASIC implementation is carried out using UMC 90 - nm technology @V DD = 1V and @ 1MHZ clock frequency. The proposed architecture implementation and experimental comparison results show that the DHT design is two times faster than state of the art architecture.

Designing Scientific Software for Heterogeneous Computing

DEFF Research Database (Denmark)

Glimberg, Stefan Lemvig

, algorithms and data structures must be designed to utilize the underlying parallel architecture. The architectural changes in hardware design within the last decade, from single to multi and many-core architectures, require software developers to identify and properly implement methods that both exploit...... makes parallel software design applicable, but also a challenge for scientific software developers at all levels. We have developed a generic C++ library for fast prototyping of large-scale PDEs solvers based on flexible-order finite difference approximations on structured regular grids. The library...... is designed with a high abstraction interface to improve developer productivity. The library is based on modern template-based design concepts as described in Glimberg, Engsig-Karup, Nielsen & Dammann (2013). The library utilizes heterogeneous CPU/GPU environments in order to maximize computational throughput...

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

Science.gov (United States)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

Passive solar energy-efficient architectural building Design ...

African Journals Online (AJOL)

In this paper analyses have been done on the climate data for various climatic regions in North Cyprus to obtain physical architectural building design specification with a view to develop passive solar energy-efficient building. It utilizes a computer program, ARCHIPAK, together with climate data (for 25 year period) to get ...

New paradigms in internal architecture design and freeform fabrication of tissue engineering porous scaffolds.

Science.gov (United States)

Yoo, Dongjin

2012-07-01

Advanced additive manufacture (AM) techniques are now being developed to fabricate scaffolds with controlled internal pore architectures in the field of tissue engineering. In general, these techniques use a hybrid method which combines computer-aided design (CAD) with computer-aided manufacturing (CAM) tools to design and fabricate complicated three-dimensional (3D) scaffold models. The mathematical descriptions of micro-architectures along with the macro-structures of the 3D scaffold models are limited by current CAD technologies as well as by the difficulty of transferring the designed digital models to standard formats for fabrication. To overcome these difficulties, we have developed an efficient internal pore architecture design system based on triply periodic minimal surface (TPMS) unit cell libraries and associated computational methods to assemble TPMS unit cells into an entire scaffold model. In addition, we have developed a process planning technique based on TPMS internal architecture pattern of unit cells to generate tool paths for freeform fabrication of tissue engineering porous scaffolds. Copyright © 2012 IPEM. Published by Elsevier Ltd. All rights reserved.

Apolux : an innovative computer code for daylight design and analysis in architecture and urbanism

Energy Technology Data Exchange (ETDEWEB)

Claro, A.; Pereira, F.O.R.; Ledo, R.Z. [Santa Catarina Federal Univ., Florianopolis, SC (Brazil)

2005-07-01

The main capabilities of a new computer program for calculating and analyzing daylighting in architectural space were discussed. Apolux 1.0 was designed to use three-dimensional files generated in graphic editors in the data exchange file (DXF) format and was developed to integrate an architect's design characteristics. An example of its use in a design context development was presented. The program offers fast and flexible manipulation of video card models in different visualization conditions. The algorithm for working with the physics of light is based on the radiosity method representing the surfaces through finite elements divided in small triangular units of area which are fully confronted to each other. The form factors of each triangle are determined in relation to all others in the primary calculation. Visible directions of the sky are also included according to the modular units of a subdivided globe. Following these primary calculations, the different and successive daylighting solutions can be determined under different sky conditions. The program can also change the properties of the materials to quickly recalculate the solutions. The program has been applied in an office building in Florianopolis, Brazil. The four stages of design include initial discussion with the architects about the conceptual possibilities; development of a comparative study based on 2 architectural designs with different conceptual elements regarding daylighting exploitation in order to compare internal daylighting levels and distribution of the 2 options exposed to the same external conditions; study the solar shading devices for specific facades; and, simulations to test the performance of different designs. The program has proven to be very flexible with reliable results. It has the possibility of incorporating situations of the real sky through the input of the Spherical model of real sky luminance values. 3 refs., 14 figs.

DSP Architecture Design Essentials

CERN Document Server

Marković, Dejan

2012-01-01

In DSP Architecture Design Essentials, authors Dejan Marković and Robert W. Brodersen cover a key subject for the successful realization of DSP algorithms for communications, multimedia, and healthcare applications. The book addresses the need for DSP architecture design that maps advanced DSP algorithms to hardware in the most power- and area-efficient way. The key feature of this text is a design methodology based on a high-level design model that leads to hardware implementation with minimum power and area. The methodology includes algorithm-level considerations such as automated word-length reduction and intrinsic data properties that can be leveraged to reduce hardware complexity. From a high-level data-flow graph model, an architecture exploration methodology based on linear programming is used to create an array of architectural solutions tailored to the underlying hardware technology. The book is supplemented with online material: bibliography, design examples, CAD tutorials and custom software.

Autonomic computing enabled cooperative networked design

CERN Document Server

Wodczak, Michal

2014-01-01

This book introduces the concept of autonomic computing driven cooperative networked system design from an architectural perspective. As such it leverages and capitalises on the relevant advancements in both the realms of autonomic computing and networking by welding them closely together. In particular, a multi-faceted Autonomic Cooperative System Architectural Model is defined which incorporates the notion of Autonomic Cooperative Behaviour being orchestrated by the Autonomic Cooperative Networking Protocol of a cross-layer nature. The overall proposed solution not only advocates for the inc

An architectural approach to level design

CERN Document Server

Totten, Christopher W

2014-01-01

Explore Level Design through the Lens of Architectural and Spatial Experience TheoryWritten by a game developer and professor trained in architecture, An Architectural Approach to Level Design is one of the first books to integrate architectural and spatial design theory with the field of level design. It explores the principles of level design through the context and history of architecture, providing information useful to both academics and game development professionals.Understand Spatial Design Principles for Game Levels in 2D, 3D, and Multiplayer ApplicationsThe book presents architectura

Network architecture test-beds as platforms for ubiquitous computing.

Science.gov (United States)

Roscoe, Timothy

2008-10-28

Distributed systems research, and in particular ubiquitous computing, has traditionally assumed the Internet as a basic underlying communications substrate. Recently, however, the networking research community has come to question the fundamental design or 'architecture' of the Internet. This has been led by two observations: first, that the Internet as it stands is now almost impossible to evolve to support new functionality; and second, that modern applications of all kinds now use the Internet rather differently, and frequently implement their own 'overlay' networks above it to work around its perceived deficiencies. In this paper, I discuss recent academic projects to allow disruptive change to the Internet architecture, and also outline a radically different view of networking for ubiquitous computing that such proposals might facilitate.

Experimental high energy physics and modern computer architectures

International Nuclear Information System (INIS)

Hoek, J.

1988-06-01

The paper examines how experimental High Energy Physics can use modern computer architectures efficiently. In this connection parallel and vector architectures are investigated, and the types available at the moment for general use are discussed. A separate section briefly describes some architectures that are either a combination of both, or exemplify other architectures. In an appendix some directions in which computing seems to be developing in the USA are mentioned. (author)

A Heterogeneous Quantum Computer Architecture

NARCIS (Netherlands)

Fu, X.; Riesebos, L.; Lao, L.; Garcia Almudever, C.; Sebastiano, F.; Versluis, R.; Charbon, E.; Bertels, K.

2016-01-01

In this paper, we present a high level view of the heterogeneous quantum computer architecture as any future quantum computer will consist of both a classical and quantum computing part. The classical part is needed for error correction as well as for the execution of algorithms that contain both

Time-Predictable Computer Architecture

Directory of Open Access Journals (Sweden)

Schoeberl Martin

2009-01-01

Full Text Available Today's general-purpose processors are optimized for maximum throughput. Real-time systems need a processor with both a reasonable and a known worst-case execution time (WCET. Features such as pipelines with instruction dependencies, caches, branch prediction, and out-of-order execution complicate WCET analysis and lead to very conservative estimates. In this paper, we evaluate the issues of current architectures with respect to WCET analysis. Then, we propose solutions for a time-predictable computer architecture. The proposed architecture is evaluated with implementation of some features in a Java processor. The resulting processor is a good target for WCET analysis and still performs well in the average case.

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing.

Science.gov (United States)

Kazakis, Georgios; Kanellopoulos, Ioannis; Sotiropoulos, Stefanos; Lagaros, Nikos D

2017-10-01

Construction industry has a major impact on the environment that we spend most of our life. Therefore, it is important that the outcome of architectural intuition performs well and complies with the design requirements. Architects usually describe as "optimal design" their choice among a rather limited set of design alternatives, dictated by their experience and intuition. However, modern design of structures requires accounting for a great number of criteria derived from multiple disciplines, often of conflicting nature. Such criteria derived from structural engineering, eco-design, bioclimatic and acoustic performance. The resulting vast number of alternatives enhances the need for computer-aided architecture in order to increase the possibility of arriving at a more preferable solution. Therefore, the incorporation of smart, automatic tools in the design process, able to further guide designer's intuition becomes even more indispensable. The principal aim of this study is to present possibilities to integrate automatic computational techniques related to topology optimization in the phase of intuition of civil structures as part of computer aided architectural design. In this direction, different aspects of a new computer aided architectural era related to the interpretation of the optimized designs, difficulties resulted from the increased computational effort and 3D printing capabilities are covered here in.

Spatial computing in interactive architecture

NARCIS (Netherlands)

S.O. Dulman (Stefan); M. Krezer; L. Hovestad

2014-01-01

htmlabstractDistributed computing is the theoretical foundation for applications and technologies like interactive architecture, wearable computing, and smart materials. It evolves continuously, following needs rising from scientific developments, novel uses of technology, or simply the curiosity to

Large computer systems and new architectures

International Nuclear Information System (INIS)

Bloch, T.

1978-01-01

The super-computers of today are becoming quite specialized and one can no longer expect to get all the state-of-the-art software and hardware facilities in one package. In order to achieve faster and faster computing it is necessary to experiment with new architectures, and the cost of developing each experimental architecture into a general-purpose computer system is too high when one considers the relatively small market for these computers. The result is that such computers are becoming 'back-ends' either to special systems (BSP, DAP) or to anything (CRAY-1). Architecturally the CRAY-1 is the most attractive today since it guarantees a speed gain of a factor of two over a CDC 7600 thus allowing us to regard any speed up resulting from vectorization as a bonus. It looks, however, as if it will be very difficult to make substantially faster computers using only pipe-lining techniques and that it will be necessary to explore multiple processors working on the same problem. The experience which will be gained with the BSP and the DAP over the next few years will certainly be most valuable in this respect. (Auth.)

Enabling Co-Design of Multi-Layer Exascale Storage Architectures

Energy Technology Data Exchange (ETDEWEB)

Carothers, Christopher [Rensselaer Polytechnic Inst., Troy, NY (United States)

2015-08-31

Growing demands for computing power in applications such as energy production, climate analysis, computational chemistry, and bioinformatics have propelled computing systems toward the exascale: systems with 10¹⁸ floating-point operations per second. These systems, to be designed and constructed over the next decade, will create unprecedented challenges in component counts, power consumption, resource limitations, and system complexity. Data storage and access are an increasingly important and complex component in extreme-scale computing systems, and significant design work is needed to develop successful storage hardware and software architectures at exascale. Co-design of these systems will be necessary to find the best possible design points for exascale systems. The goal of this work has been to enable the exploration and co-design of exascale storage systems by providing a detailed, accurate, and highly parallel simulation of exascale storage and the surrounding environment. Specifically, this simulation has (1) portrayed realistic application checkpointing and analysis workloads, (2) captured the complexity, scale, and multilayer nature of exascale storage hardware and software, and (3) executed in a timeframe that enables “what if'” exploration of design concepts. We developed models of the major hardware and software components in an exascale storage system, as well as the application I/O workloads that drive them. We used our simulation system to investigate critical questions in reliability and concurrency at exascale, helping guide the design of future exascale hardware and software architectures. Additionally, we provided this system to interested vendors and researchers so that others can explore the design space. We validated the capabilities of our simulation environment by configuring the simulation to represent the Argonne Leadership Computing Facility Blue Gene/Q system and comparing simulation results for application I

Materials Driven Architectural Design and Representation

DEFF Research Database (Denmark)

Kruse Aagaard, Anders

2015-01-01

This paper aims to outline a framework for a deeper connection between experimentally obtained material knowledge and architectural design. While materials and architecture in the process of realisation are tightly connected, architectural design and representation are often distanced from...... another role in relation to architectural production. It is, in this paper, the intention to point at material research as an active initiator in explorative approaches to architectural design methods and architectural representation. This paper will point at the inclusion of tangible and experimental...... material research in the early phases of architectural design and to that of the architectural set of tools and representation. The paper will through use of existing research and the author’s own material research and practice suggest a way of using a combination of digital drawing, digital fabrication...

Flexible weapons architecture design

Science.gov (United States)

Pyant, William C., III

Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilian casualties. This thesis shows that the architecture design factors of damage mechanism, fusing, weapons weight, guidance, and propulsion are significant in enhancing weapon performance objectives, and would benefit from modularization. Additionally, this thesis constructs an algorithm that can be used to design a weapon set for a particular target class based on these modular components.

Outline of a novel architecture for cortical computation

OpenAIRE

Majumdar, Kaushik

2007-01-01

In this paper a novel architecture for cortical computation has been proposed. This architecture is composed of computing paths consisting of neurons and synapses only. These paths have been decomposed into lateral, longitudinal and vertical components. Cortical computation has then been decomposed into lateral computation (LaC), longitudinal computation (LoC) and vertical computation (VeC). It has been shown that various loop structures in the cortical circuit play important roles in cortica...

Performative Computation-aided Design Optimization

Directory of Open Access Journals (Sweden)

Ming Tang

2012-12-01

Full Text Available This article discusses a collaborative research and teaching project between the University of Cincinnati, Perkins+Will’s Tech Lab, and the University of North Carolina Greensboro. The primary investigation focuses on the simulation, optimization, and generation of architectural designs using performance-based computational design approaches. The projects examine various design methods, including relationships between building form, performance and the use of proprietary software tools for parametric design.

Landscape Architectural Design as Scientific Inquiry?

OpenAIRE

Lenzholzer, S.

2011-01-01

This presentation discusses ‘landscape architectural design as scientific inquiry’ and exemplifies this with the description of a design process within climate-responsive design leading to new design knowledge. ‘Research and design’ are issues that need increasing attention within landscape architecture academia. Substantial contributions on ‘research’ and ‘design’ exist within architectural theory [1,2,3,4]. However, within landscape architecture, there are only few publications on this topi...

Researching on knowledge architecture of design by analysis based on ASME code

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan

2003-01-01

The quality of knowledge-based system's knowledge architecture is one of decisive factors of knowledge-based system's validity and rationality. For designing the ASME code knowledge based system, this paper presents a knowledge acquisition method which is extracting knowledge through document analysis consulted domain experts' knowledge. Then the paper describes knowledge architecture of design by analysis based on the related rules in ASME code. The knowledge of the knowledge architecture is divided into two categories: one is empirical knowledge, and another is ASME code knowledge. Applied as the basement of the knowledge architecture, a general procedural process of design by analysis that is met the engineering design requirements and designers' conventional mode is generalized and explained detailed in the paper. For the sake of improving inference efficiency and concurrent computation of KBS, a kind of knowledge Petri net (KPN) model is proposed and adopted in expressing the knowledge architecture. Furthermore, for validating and verifying of the empirical rules, five knowledge validation and verification theorems are given in the paper. Moreover the research production is applicable to design the knowledge architecture of ASME codes or other engineering standards. (author)

Computing on Knights and Kepler Architectures

International Nuclear Information System (INIS)

Bortolotti, G; Caberletti, M; Ferraro, A; Giacomini, F; Manzali, M; Maron, G; Salomoni, D; Crimi, G; Zanella, M

2014-01-01

A recent trend in scientific computing is the increasingly important role of co-processors, originally built to accelerate graphics rendering, and now used for general high-performance computing. The INFN Computing On Knights and Kepler Architectures (COKA) project focuses on assessing the suitability of co-processor boards for scientific computing in a wide range of physics applications, and on studying the best programming methodologies for these systems. Here we present in a comparative way our results in porting a Lattice Boltzmann code on two state-of-the-art accelerators: the NVIDIA K20X, and the Intel Xeon-Phi. We describe our implementations, analyze results and compare with a baseline architecture adopting Intel Sandy Bridge CPUs.

Architecture, systems research and computational sciences

CERN Document Server

2012-01-01

The Winter 2012 (vol. 14 no. 1) issue of the Nexus Network Journal is dedicated to the theme “Architecture, Systems Research and Computational Sciences”. This is an outgrowth of the session by the same name which took place during the eighth international, interdisciplinary conference “Nexus 2010: Relationships between Architecture and Mathematics, held in Porto, Portugal, in June 2010. Today computer science is an integral part of even strictly historical investigations, such as those concerning the construction of vaults, where the computer is used to survey the existing building, analyse the data and draw the ideal solution. What the papers in this issue make especially evident is that information technology has had an impact at a much deeper level as well: architecture itself can now be considered as a manifestation of information and as a complex system. The issue is completed with other research papers, conference reports and book reviews.

Designing Domain-Specific Heterogeneous Architectures from Dataflow Programs

Directory of Open Access Journals (Sweden)

Süleyman Savas

2018-04-01

Full Text Available The last ten years have seen performance and power requirements pushing computer architectures using only a single core towards so-called manycore systems with hundreds of cores on a single chip. To further increase performance and energy efficiency, we are now seeing the development of heterogeneous architectures with specialized and accelerated cores. However, designing these heterogeneous systems is a challenging task due to their inherent complexity. We proposed an approach for designing domain-specific heterogeneous architectures based on instruction augmentation through the integration of hardware accelerators into simple cores. These hardware accelerators were determined based on their common use among applications within a certain domain.The objective was to generate heterogeneous architectures by integrating many of these accelerated cores and connecting them with a network-on-chip. The proposed approach aimed to ease the design of heterogeneous manycore architectures—and, consequently, exploration of the design space—by automating the design steps. To evaluate our approach, we enhanced our software tool chain with a tool that can generate accelerated cores from dataflow programs. This new tool chain was evaluated with the aid of two use cases: radar signal processing and mobile baseband processing. We could achieve an approximately 4 × improvement in performance, while executing complete applications on the augmented cores with a small impact (2.5–13% on area usage. The generated accelerators are competitive, achieving more than 90% of the performance of hand-written implementations.

The impact of optimize solar radiation received on the levels and energy disposal of levels on architectural design result by using computer simulation

Energy Technology Data Exchange (ETDEWEB)

Rezaei, Davood; Farajzadeh Khosroshahi, Samaneh; Sadegh Falahat, Mohammad [Zanjan University (Iran, Islamic Republic of)], email: d_rezaei@znu.ac.ir, email: ronas_66@yahoo.com, email: Safalahat@yahoo.com

2011-07-01

In order to minimize the energy consumption of a building it is important to achieve optimum solar energy. The aim of this paper is to introduce the use of computer modeling in the early stages of design to optimize solar radiation received and energy disposal in an architectural design. Computer modeling was performed on 2 different projects located in Los Angeles, USA, using ECOTECT software. Changes were made to the designs following analysis of the modeling results and a subsequent analysis was carried out on the optimized designs. Results showed that the computer simulation allows the designer to set the analysis criteria and improve the energy performance of a building before it is constructed; moreover, it can be used for a wide range of optimization levels. This study pointed out that computer simulation should be performed in the design stage to optimize a building's energy performance.

High Performance Systolic Array Core Architecture Design for DNA Sequencer

Directory of Open Access Journals (Sweden)

Saiful Nurdin Dayana

2018-01-01

Full Text Available This paper presents a high performance systolic array (SA core architecture design for Deoxyribonucleic Acid (DNA sequencer. The core implements the affine gap penalty score Smith-Waterman (SW algorithm. This time-consuming local alignment algorithm guarantees optimal alignment between DNA sequences, but it requires quadratic computation time when performed on standard desktop computers. The use of linear SA decreases the time complexity from quadratic to linear. In addition, with the exponential growth of DNA databases, the SA architecture is used to overcome the timing issue. In this work, the SW algorithm has been captured using Verilog Hardware Description Language (HDL and simulated using Xilinx ISIM simulator. The proposed design has been implemented in Xilinx Virtex -6 Field Programmable Gate Array (FPGA and improved in the core area by 90% reduction.

Energy-aware system design algorithms and architectures

CERN Document Server

Kyung, Chong-Min

2011-01-01

Power consumption becomes the most important design goal in a wide range of electronic systems. There are two driving forces towards this trend: continuing device scaling and ever increasing demand of higher computing power. First, device scaling continues to satisfy Moore’s law via a conventional way of scaling (More Moore) and a new way of exploiting the vertical integration (More than Moore). Second, mobile and IT convergence requires more computing power on the silicon chip than ever. Cell phones are now evolving towards mobile PC. PCs and data centers are becoming commodities in house and a must in industry. Both supply enabled by device scaling and demand triggered by the convergence trend realize more computation on chip (via multi-core, integration of diverse functionalities on mobile SoCs, etc.) and finally more power consumption incurring power-related issues and constraints. Energy-Aware System Design: Algorithms and Architectures provides state-of-the-art ideas for low power design methods from ...

NET-COMPUTER: Internet Computer Architecture and its Application in E-Commerce

Directory of Open Access Journals (Sweden)

P. O. Umenne

2012-12-01

Full Text Available Research in Intelligent Agents has yielded interesting results, some of which have been translated into commer­cial ventures. Intelligent Agents are executable software components that represent the user, perform tasks on behalf of the user and when the task terminates, the Agents send the result to the user. Intelligent Agents are best suited for the Internet: a collection of computers connected together in a world-wide computer network. Swarm and HYDRA computer architectures for Agents’ execution were developed at the University of Surrey, UK in the 90s. The objective of the research was to develop a software-based computer architecture on which Agents execution could be explored. The combination of Intelligent Agents and HYDRA computer architecture gave rise to a new computer concept: the NET-Computer in which the comput­ing resources reside on the Internet. The Internet computers form the hardware and software resources, and the user is provided with a simple interface to access the Internet and run user tasks. The Agents autonomously roam the Internet (NET-Computer executing the tasks. A growing segment of the Internet is E-Commerce for online shopping for products and services. The Internet computing resources provide a marketplace for product suppliers and consumers alike. Consumers are looking for suppliers selling products and services, while suppliers are looking for buyers. Searching the vast amount of information available on the Internet causes a great deal of problems for both consumers and suppliers. Intelligent Agents executing on the NET-Computer can surf through the Internet and select specific information of interest to the user. The simulation results show that Intelligent Agents executing HYDRA computer architecture could be applied in E-Commerce.

Computing architecture for autonomous microgrids

Science.gov (United States)

Goldsmith, Steven Y.

2015-09-29

A computing architecture that facilitates autonomously controlling operations of a microgrid is described herein. A microgrid network includes numerous computing devices that execute intelligent agents, each of which is assigned to a particular entity (load, source, storage device, or switch) in the microgrid. The intelligent agents can execute in accordance with predefined protocols to collectively perform computations that facilitate uninterrupted control of the .

Addressing Cloud Computing in Enterprise Architecture: Issues and Challenges

OpenAIRE

Khan, Khaled; Gangavarapu, Narendra

2009-01-01

This article discusses how the characteristics of cloud computing affect the enterprise architecture in four domains: business, data, application and technology. The ownership and control of architectural components are shifted from organisational perimeters to cloud providers. It argues that although cloud computing promises numerous benefits to enterprises, the shifting control from enterprises to cloud providers on architectural components introduces several architectural challenges. The d...

Situating universal design architecture: designing with whom?

Science.gov (United States)

Jones, Paul

2014-01-01

To respond to growing calls for a theoretical unpacking of Universal Design (UD), a disparate movement cohering around attempts to design spaces and technologies that seek to allow use by all people (to the fullest extent possible). The on-going embedding of UD into architectural practice and pedagogy represents an opportune juncture at which to draw learning from other distinct-but-related transformatory architectural movements. Sociological-theoretical commentary. UD has to date, and necessarily, been dominated by the practice contexts from which it emerged. Appealing as a short-hand for description of "designing-for-all", in most cases UD has come to stand in as a term to signal a general intent in this direction and as an umbrella term for the range of technical design resources that have been developed under these auspices. There remains a fundamental ambivalence vis-à-vis the question of users' power/capacity to influence decision-making in the design process in UD; technically-oriented typologies of bodies predominate in influential UD architectural accounts. UD represents rich technical and pedagogical resources for those architects committed to transforming the existing built environment so as to be less hostile to a wide range of users. However, within UD, unpacking the social role of the professional architect vis-à-vis a variety of publics is an important, but hitherto underdeveloped, challenge; issues concerning professional-citizen power relations continue to animate parallel architectural politics, and UD can both contribute and draw much from these on-going explorations. Implications for Rehabilitation Universal Design (UD) architecture shares a close affinity with rehabilitation practice, with the creation of built environments that allow use by individuals with a wide range of capacities a priority for both. While an effective communicative "bridge" between professions, UD's deployment typically leaves unspoken the capacity of users to

Thrifty: An Exascale Architecture for Energy Proportional Computing

Energy Technology Data Exchange (ETDEWEB)

Torrellas, Josep [Univ. of Illinois, Champaign, IL (United States)

2014-12-23

The objective of this project is to design different aspects of a novel exascale architecture called Thrifty. Our goal is to focus on the challenges of power/energy efficiency, performance, and resiliency in exascale systems. The project includes work on computer architecture (Josep Torrellas from University of Illinois), compilation (Daniel Quinlan from Lawrence Livermore National Laboratory), runtime and applications (Laura Carrington from University of California San Diego), and circuits (Wilfred Pinfold from Intel Corporation). In this report, we focus on the progress at the University of Illinois during the last year of the grant (September 1, 2013 to August 31, 2014). We also point to the progress in the other collaborating institutions when needed.

Programmable architecture for quantum computing

NARCIS (Netherlands)

Chen, J.; Wang, L.; Charbon, E.; Wang, B.

2013-01-01

A programmable architecture called “quantum FPGA (field-programmable gate array)” (QFPGA) is presented for quantum computing, which is a hybrid model combining the advantages of the qubus system and the measurement-based quantum computation. There are two kinds of buses in QFPGA, the local bus and

Ontology Design for Solving Computationally-Intensive Problems on Heterogeneous Architectures

Directory of Open Access Journals (Sweden)

Hossam M. Faheem

2018-02-01

Full Text Available Viewing a computationally-intensive problem as a self-contained challenge with its own hardware, software and scheduling strategies is an approach that should be investigated. We might suggest assigning heterogeneous hardware architectures to solve a problem, while parallel computing paradigms may play an important role in writing efficient code to solve the problem; moreover, the scheduling strategies may be examined as a possible solution. Depending on the problem complexity, finding the best possible solution using an integrated infrastructure of hardware, software and scheduling strategy can be a complex job. Developing and using ontologies and reasoning techniques play a significant role in reducing the complexity of identifying the components of such integrated infrastructures. Undertaking reasoning and inferencing regarding the domain concepts can help to find the best possible solution through a combination of hardware, software and scheduling strategies. In this paper, we present an ontology and show how we can use it to solve computationally-intensive problems from various domains. As a potential use for the idea, we present examples from the bioinformatics domain. Validation by using problems from the Elastic Optical Network domain has demonstrated the flexibility of the suggested ontology and its suitability for use with any other computationally-intensive problem domain.

Design of a modular digital computer system, DRL 4. [for meeting future requirements of spaceborne computers

Science.gov (United States)

1972-01-01

The design is reported of an advanced modular computer system designated the Automatically Reconfigurable Modular Multiprocessor System, which anticipates requirements for higher computing capacity and reliability for future spaceborne computers. Subjects discussed include: an overview of the architecture, mission analysis, synchronous and nonsynchronous scheduling control, reliability, and data transmission.

HTMT-class Latency Tolerant Parallel Architecture for Petaflops Scale Computation

Science.gov (United States)

Sterling, Thomas; Bergman, Larry

2000-01-01

Computational Aero Sciences and other numeric intensive computation disciplines demand computing throughputs substantially greater than the Teraflops scale systems only now becoming available. The related fields of fluids, structures, thermal, combustion, and dynamic controls are among the interdisciplinary areas that in combination with sufficient resolution and advanced adaptive techniques may force performance requirements towards Petaflops. This will be especially true for compute intensive models such as Navier-Stokes are or when such system models are only part of a larger design optimization computation involving many design points. Yet recent experience with conventional MPP configurations comprising commodity processing and memory components has shown that larger scale frequently results in higher programming difficulty and lower system efficiency. While important advances in system software and algorithms techniques have had some impact on efficiency and programmability for certain classes of problems, in general it is unlikely that software alone will resolve the challenges to higher scalability. As in the past, future generations of high-end computers may require a combination of hardware architecture and system software advances to enable efficient operation at a Petaflops level. The NASA led HTMT project has engaged the talents of a broad interdisciplinary team to develop a new strategy in high-end system architecture to deliver petaflops scale computing in the 2004/5 timeframe. The Hybrid-Technology, MultiThreaded parallel computer architecture incorporates several advanced technologies in combination with an innovative dynamic adaptive scheduling mechanism to provide unprecedented performance and efficiency within practical constraints of cost, complexity, and power consumption. The emerging superconductor Rapid Single Flux Quantum electronics can operate at 100 GHz (the record is 770 GHz) and one percent of the power required by convention

GAUDI-Architecture design document

CERN Document Server

Mato, P

1998-01-01

98-064 This document is the result of the architecture design phase for the LHCb event data processing applications project. The architecture of the LHCb software system includes its logical and physical structure which has been forged by all the strategic and tactical decisions applied during development. The strategic decisions should be made explicitly with the considerations for the trade-off of each alternative. The other purpose of this document is that it serves as the main material for the scheduled architecture review that will take place in the next weeks. The architecture review will allow us to identify what are the weaknesses or strengths of the proposed architecture as well as we hope to obtain a list of suggested changes to improve it. All that well before the system is being realized in code. It is in our interest to identify the possible problems at the architecture design phase of the software project before much of the software is implemented. Strategic decisions must be cross checked caref...

A Generative Computer Model for Preliminary Design of Mass Housing

Directory of Open Access Journals (Sweden)

Ahmet Emre DİNÇER

2014-05-01

Full Text Available Today, we live in what we call the “Information Age”, an age in which information technologies are constantly being renewed and developed. Out of this has emerged a new approach called “Computational Design” or “Digital Design”. In addition to significantly influencing all fields of engineering, this approach has come to play a similar role in all stages of the design process in the architectural field. In providing solutions for analytical problems in design such as cost estimate, circulation systems evaluation and environmental effects, which are similar to engineering problems, this approach is being used in the evaluation, representation and presentation of traditionally designed buildings. With developments in software and hardware technology, it has evolved as the studies based on design of architectural products and production implementations with digital tools used for preliminary design stages. This paper presents a digital model which may be used in the preliminary stage of mass housing design with Cellular Automata, one of generative design systems based on computational design approaches. This computational model, developed by scripts of 3Ds Max software, has been implemented on a site plan design of mass housing, floor plan organizations made by user preferences and facade designs. By using the developed computer model, many alternative housing types could be rapidly produced. The interactive design tool of this computational model allows the user to transfer dimensional and functional housing preferences by means of the interface prepared for model. The results of the study are discussed in the light of innovative architectural approaches.

Design issues for numerical libraries on scalable multicore architectures

International Nuclear Information System (INIS)

Heroux, M A

2008-01-01

Future generations of scalable computers will rely on multicore nodes for a significant portion of overall system performance. At present, most applications and libraries cannot exploit multiple cores beyond running addition MPI processes per node. In this paper we discuss important multicore architecture issues, programming models, algorithms requirements and software design related to effective use of scalable multicore computers. In particular, we focus on important issues for library research and development, making recommendations for how to effectively develop libraries for future scalable computer systems

Monte Carlo simulations on SIMD computer architectures

International Nuclear Information System (INIS)

Burmester, C.P.; Gronsky, R.; Wille, L.T.

1992-01-01

In this paper algorithmic considerations regarding the implementation of various materials science applications of the Monte Carlo technique to single instruction multiple data (SIMD) computer architectures are presented. In particular, implementation of the Ising model with nearest, next nearest, and long range screened Coulomb interactions on the SIMD architecture MasPar MP-1 (DEC mpp-12000) series of massively parallel computers is demonstrated. Methods of code development which optimize processor array use and minimize inter-processor communication are presented including lattice partitioning and the use of processor array spanning tree structures for data reduction. Both geometric and algorithmic parallel approaches are utilized. Benchmarks in terms of Monte Carl updates per second for the MasPar architecture are presented and compared to values reported in the literature from comparable studies on other architectures

Design and Decorative Art in Shaping of Architectural Environment Image

Science.gov (United States)

Shabalina, N. M.

2017-11-01

The relevance of the topic is determined by the dynamic development of the promising branch, i.e. the architectural environment design, which requires, on the one hand, consideration of the morphology and typology of this art form, on the other hand, the specificity of the architectural environment artistic image. The intensive development of innovative computer technologies and materials in modern engineering, improvement of the information communications forms in their totality has led to the application of new methods in design and construction which, in their turn, have required the development of additional methods for content and context analysis in the integrated assessment of socially significant architectural environments. In the modern culture, correlative processes are steadily developing leading us to a new understanding of the interaction of architecture, decorative art and design. Their rapprochement at the morphological level has been noted which makes it possible to reveal a specific method of synthesis and similarity. The architecture of postmodern styles differs in its bionic form becoming an interactive part of the society and approaching its structural qualities with painting, sculpture, and design. In the modern world, these processes acquire multi-valued semantic nuances, expand the importance of associativity and dynamic processuality in the perception of environmental objects and demand the development of new approaches to the assessment of the architectural design environment. Within the framework of the universal paradigm of modern times the concept of the world develops as a set of systems that live according to the self-organization laws.

Interior Design in Architectural Education

Science.gov (United States)

Gurel, Meltem O.; Potthoff, Joy K.

2006-01-01

The domain of interiors constitutes a point of tension between practicing architects and interior designers. Design of interior spaces is a significant part of architectural profession. Yet, to what extent does architectural education keep pace with changing demands in rendering topics that are identified as pertinent to the design of interiors?…

Computer Architecture A Quantitative Approach

CERN Document Server

Hennessy, John L

2011-01-01

The computing world today is in the middle of a revolution: mobile clients and cloud computing have emerged as the dominant paradigms driving programming and hardware innovation today. The Fifth Edition of Computer Architecture focuses on this dramatic shift, exploring the ways in which software and technology in the cloud are accessed by cell phones, tablets, laptops, and other mobile computing devices. Each chapter includes two real-world examples, one mobile and one datacenter, to illustrate this revolutionary change.Updated to cover the mobile computing revolutionEmphasizes the two most im

Do Architectural Design Decisions Improve the Understanding of Software Architecture? Two Controlled Experiments

NARCIS (Netherlands)

Shahin, M.; Liang, P.; Li, Z.

2014-01-01

Architectural design decision (ADD) and its design rationale, as a paradigm shift on documenting and enriching architecture design description, is supposed to facilitate the understanding of architecture and the reasoning behind the design rationale, which consequently improves the architecting

Basic design in architectural education in Turkey

Directory of Open Access Journals (Sweden)

Makaklı Elif Süyük

2016-01-01

Full Text Available Creative activity is one of the most significant parts of architectural education. In the architectural curriculum organisation ‘design studio’ is the unique and preeminent subject. Freshman students encounter ‘design’ first in basic design course, before they know what designing incorporates. The Basic Design is the starting point of initiating creativity in architecture education. It helps each student to understand architecture as a creative and innovative practice in the first year of education. This study analyzes the characteristics of basic design course, the topics of the course contents and its significance in the architectural curriculum in Turkey as well.

Algorithm-structured computer arrays and networks architectures and processes for images, percepts, models, information

CERN Document Server

Uhr, Leonard

1984-01-01

Computer Science and Applied Mathematics: Algorithm-Structured Computer Arrays and Networks: Architectures and Processes for Images, Percepts, Models, Information examines the parallel-array, pipeline, and other network multi-computers.This book describes and explores arrays and networks, those built, being designed, or proposed. The problems of developing higher-level languages for systems and designing algorithm, program, data flow, and computer structure are also discussed. This text likewise describes several sequences of successively more general attempts to combine the power of arrays wi

A computational intelligence decision-support environment for architectural and building design : CIDEA

NARCIS (Netherlands)

Chatzikonstantinou, I.

2016-01-01

Environmentally friendly and comfortable buildings are a much sought after goal in today's architectural practice. In order to improve energy consumption of buildings without sacrificing indoor comfort, careful consideration of design decisions is needed. Simulation tools provide a solution to

CisLunar Habitat Internal Architecture Design Criteria

Science.gov (United States)

Jones, R.; Kennedy, K.; Howard, R.; Whitmore, M.; Martin, C.; Garate, J.

2017-01-01

BACKGROUND: In preparation for human exploration to Mars, there is a need to define the development and test program that will validate deep space operations and systems. In that context, a Proving Grounds CisLunar habitat spacecraft is being defined as the next step towards this goal. This spacecraft will operate differently from the ISS or other spacecraft in human history. The performance envelope of this spacecraft (mass, volume, power, specifications, etc.) is being defined by the Future Capabilities Study Team. This team has recognized the need for a human-centered approach for the internal architecture of this spacecraft and has commissioned a CisLunar Phase-1 Habitat Internal Architecture Study Team to develop a NASA reference configuration, providing the Agency with a "smart buyer" approach for future acquisition. THE CISLUNAR HABITAT INTERNAL ARCHITECTURE STUDY: Overall, the CisLunar Habitat Internal Architecture study will address the most significant questions and risks in the current CisLunar architecture, habitation, and operations concept development. This effort is achieved through definition of design criteria, evaluation criteria and process, design of the CisLunar Habitat Phase-1 internal architecture, and the development and fabrication of internal architecture concepts combined with rigorous and methodical Human-in-the-Loop (HITL) evaluations and testing of the conceptual innovations in a controlled test environment. The vision of the CisLunar Habitat Internal Architecture Study is to design, build, and test a CisLunar Phase-1 Habitat Internal Architecture that will be used for habitation (e.g. habitability and human factors) evaluations. The evaluations will mature CisLunar habitat evaluation tools, guidelines, and standards, and will interface with other projects such as the Advanced Exploration Systems (AES) Program integrated Power, Avionics, Software (iPAS), and Logistics for integrated human-in-the-loop testing. The mission of the Cis

On the computation of well-structured graphic representations in architectural design

NARCIS (Netherlands)

Achten, H.H.

2004-01-01

Architects intensively use graphic representations to communicate their design ideas for themselves, between professionals, and others. The design drawing therefore, is an important medium to establish design support by means of computers. In order to make drawings accessible for computers, it is

Culturally Accepted Green Architecture Toolbox : pre-design helping tool and rating system for new built environment in Egypt

NARCIS (Netherlands)

El Fiky, Usama; Cox, Mark; Leeuwen, J.P.; Timmermans, H.J.P.

2006-01-01

This paper describes and analyses the process of developing computer software to incorporate both green architecture design strategies and their cultural indicators in one easy tool to help a designer to match his / her design with green architectural principles in the pre-design stage. The three

A SECURE MESSAGE TRANSMISSION SYSTEM ARCHITECTURE FOR COMPUTER NETWORKS EMPLOYING SMART CARDS

Directory of Open Access Journals (Sweden)

Geylani KARDAŞ

2008-01-01

Full Text Available In this study, we introduce a mobile system architecture which employs smart cards for secure message transmission in computer networks. The use of smart card provides two security services as authentication and confidentiality in our design. The security of the system is provided by asymmetric encryption. Hence, smart cards are used to store personal account information as well as private key of each user for encryption / decryption operations. This offers further security, authentication and mobility to the system architecture. A real implementation of the proposed architecture which utilizes the JavaCard technology is also discussed in this study.

Biomorphic Multi-Agent Architecture for Persistent Computing

Science.gov (United States)

Lodding, Kenneth N.; Brewster, Paul

2009-01-01

A multi-agent software/hardware architecture, inspired by the multicellular nature of living organisms, has been proposed as the basis of design of a robust, reliable, persistent computing system. Just as a multicellular organism can adapt to changing environmental conditions and can survive despite the failure of individual cells, a multi-agent computing system, as envisioned, could adapt to changing hardware, software, and environmental conditions. In particular, the computing system could continue to function (perhaps at a reduced but still reasonable level of performance) if one or more component( s) of the system were to fail. One of the defining characteristics of a multicellular organism is unity of purpose. In biology, the purpose is survival of the organism. The purpose of the proposed multi-agent architecture is to provide a persistent computing environment in harsh conditions in which repair is difficult or impossible. A multi-agent, organism-like computing system would be a single entity built from agents or cells. Each agent or cell would be a discrete hardware processing unit that would include a data processor with local memory, an internal clock, and a suite of communication equipment capable of both local line-of-sight communications and global broadcast communications. Some cells, denoted specialist cells, could contain such additional hardware as sensors and emitters. Each cell would be independent in the sense that there would be no global clock, no global (shared) memory, no pre-assigned cell identifiers, no pre-defined network topology, and no centralized brain or control structure. Like each cell in a living organism, each agent or cell of the computing system would contain a full description of the system encoded as genes, but in this case, the genes would be components of a software genome.

Simulation of Si:P spin-based quantum computer architecture

International Nuclear Information System (INIS)

Chang Yiachung; Fang Angbo

2008-01-01

We present realistic simulation for single and double phosphorous donors in a silicon-based quantum computer design by solving a valley-orbit coupled effective-mass equation for describing phosphorous donors in strained silicon quantum well (QW). Using a generalized unrestricted Hartree-Fock method, we solve the two-electron effective-mass equation with quantum well confinement and realistic gate potentials. The effects of QW width, gate voltages, donor separation, and donor position shift on the lowest singlet and triplet energies and their charge distributions for a neighboring donor pair in the quantum computer(QC) architecture are analyzed. The gate tunability are defined and evaluated for a typical QC design. Estimates are obtained for the duration of spin half-swap gate operation.

Computer Security Primer: Systems Architecture, Special Ontology and Cloud Virtual Machines

Science.gov (United States)

Waguespack, Leslie J.

2014-01-01

With the increasing proliferation of multitasking and Internet-connected devices, security has reemerged as a fundamental design concern in information systems. The shift of IS curricula toward a largely organizational perspective of security leaves little room for focus on its foundation in systems architecture, the computational underpinnings of…

Architectural Geometry and Fabrication-Aware Design

KAUST Repository

Pottmann, Helmut

2013-01-01

. This is the source of numerous research problems many of which fall into the area of Geometric Computing and form part of a recently emerging research area, called "Architectural Geometry". The present paper provides a short survey of research in Architectural

DREAMS and IMAGE: A Model and Computer Implementation for Concurrent, Life-Cycle Design of Complex Systems

Science.gov (United States)

Hale, Mark A.; Craig, James I.; Mistree, Farrokh; Schrage, Daniel P.

1995-01-01

Computing architectures are being assembled that extend concurrent engineering practices by providing more efficient execution and collaboration on distributed, heterogeneous computing networks. Built on the successes of initial architectures, requirements for a next-generation design computing infrastructure can be developed. These requirements concentrate on those needed by a designer in decision-making processes from product conception to recycling and can be categorized in two areas: design process and design information management. A designer both designs and executes design processes throughout design time to achieve better product and process capabilities while expanding fewer resources. In order to accomplish this, information, or more appropriately design knowledge, needs to be adequately managed during product and process decomposition as well as recomposition. A foundation has been laid that captures these requirements in a design architecture called DREAMS (Developing Robust Engineering Analysis Models and Specifications). In addition, a computing infrastructure, called IMAGE (Intelligent Multidisciplinary Aircraft Generation Environment), is being developed that satisfies design requirements defined in DREAMS and incorporates enabling computational technologies.

Quantum computation architecture using optical tweezers

DEFF Research Database (Denmark)

Weitenberg, Christof; Kuhr, Stefan; Mølmer, Klaus

2011-01-01

We present a complete architecture for scalable quantum computation with ultracold atoms in optical lattices using optical tweezers focused to the size of a lattice spacing. We discuss three different two-qubit gates based on local collisional interactions. The gates between arbitrary qubits...... quantum computing....

From Archi Torture to Architecture: Undergraduate Students Design and Implement Computers Using the Multimedia Logic Emulator

Science.gov (United States)

Stanley, Timothy D.; Wong, Lap Kei; Prigmore, Daniel; Benson, Justin; Fishler, Nathan; Fife, Leslie; Colton, Don

2007-01-01

Students learn better when they both hear and do. In computer architecture courses "doing" can be difficult in small schools without hardware laboratories hosted by computer engineering, electrical engineering, or similar departments. Software solutions exist. Our success with George Mills' Multimedia Logic (MML) is the focus of this paper. MML…

ArchE - An Architecture Design Assistant

Science.gov (United States)

2007-08-02

Architecture Design Assistant Len Bass August 2, 2007 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...ArchE - An Architecture Design Assistant 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...X, Module X 3 Author / Presenter, Date if Needed What is ArchE? ArchE is a software architecture design assistant, which: • Takes quality and

Flexible weapons architecture design

OpenAIRE

Pyant, William C.

2015-01-01

Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilia...

Switching from computer to microcomputer architecture education

Science.gov (United States)

Bolanakis, Dimosthenis E.; Kotsis, Konstantinos T.; Laopoulos, Theodore

2010-03-01

In the last decades, the technological and scientific evolution of the computing discipline has been widely affecting research in software engineering education, which nowadays advocates more enlightened and liberal ideas. This article reviews cross-disciplinary research on a computer architecture class in consideration of its switching to microcomputer architecture. The authors present their strategies towards a successful crossing of boundaries between engineering disciplines. This communication aims at providing a different aspect on professional courses that are, nowadays, addressed at the expense of traditional courses.

Computer architecture for efficient algorithmic executions in real-time systems: New technology for avionics systems and advanced space vehicles

Science.gov (United States)

Carroll, Chester C.; Youngblood, John N.; Saha, Aindam

1987-01-01

Improvements and advances in the development of computer architecture now provide innovative technology for the recasting of traditional sequential solutions into high-performance, low-cost, parallel system to increase system performance. Research conducted in development of specialized computer architecture for the algorithmic execution of an avionics system, guidance and control problem in real time is described. A comprehensive treatment of both the hardware and software structures of a customized computer which performs real-time computation of guidance commands with updated estimates of target motion and time-to-go is presented. An optimal, real-time allocation algorithm was developed which maps the algorithmic tasks onto the processing elements. This allocation is based on the critical path analysis. The final stage is the design and development of the hardware structures suitable for the efficient execution of the allocated task graph. The processing element is designed for rapid execution of the allocated tasks. Fault tolerance is a key feature of the overall architecture. Parallel numerical integration techniques, tasks definitions, and allocation algorithms are discussed. The parallel implementation is analytically verified and the experimental results are presented. The design of the data-driven computer architecture, customized for the execution of the particular algorithm, is discussed.

Architectural Design Support for Composition & Superimposition

NARCIS (Netherlands)

Gurp, Jilles van; Smedinga, Rein; Bosch, Jan

2002-01-01

The ever growing size and complexity of software systems is making it increasingly harder to build systems that both meet current and future requirements. During architecture design, a lot of important design decisions are taken. In this paper, we present an architecture design notation based on

Lowering the threshold for computers in early design : some advances in architectural design

NARCIS (Netherlands)

Achten, H.H.

2004-01-01

The design drawing is an important medium for establishing design support by means of computers. Architects intensively use graphic representations to communicate their design ideas personally, between professionals, and others. In this study, we consider line drawings such as sketches or drawings.

Computer Architecture A Quantitative Approach

CERN Document Server

Hennessy, John L

2007-01-01

The era of seemingly unlimited growth in processor performance is over: single chip architectures can no longer overcome the performance limitations imposed by the power they consume and the heat they generate. Today, Intel and other semiconductor firms are abandoning the single fast processor model in favor of multi-core microprocessors--chips that combine two or more processors in a single package. In the fourth edition of Computer Architecture, the authors focus on this historic shift, increasing their coverage of multiprocessors and exploring the most effective ways of achieving parallelis

A Conceptual Architecture for Adaptive Human-Computer Interface of a PT Operation Platform Based on Context-Awareness

Directory of Open Access Journals (Sweden)

Qing Xue

2014-01-01

Full Text Available We present a conceptual architecture for adaptive human-computer interface of a PT operation platform based on context-awareness. This architecture will form the basis of design for such an interface. This paper describes components, key technologies, and working principles of the architecture. The critical contents covered context information modeling, processing, relationship establishing between contexts and interface design knowledge by use of adaptive knowledge reasoning, and visualization implementing of adaptive interface with the aid of interface tools technology.

Contagious architecture: computation, aesthetics, and space (technologies of lived abstraction)

CERN Document Server

Parisi, Luciana

2013-01-01

In Contagious Architecture, Luciana Parisi offers a philosophical inquiry into the status of the algorithm in architectural and interaction design. Her thesis is that algorithmic computation is not simply an abstract mathematical tool but constitutes a mode of thought in its own right, in that its operation extends into forms of abstraction that lie beyond direct human cognition and control. These include modes of infinity, contingency, and indeterminacy, as well as incomputable quantities underlying the iterative process of algorithmic processing. The main philosophical source for the project is Alfred North Whitehead, whose process philosophy is specifically designed to provide a vocabulary for "modes of thought" exhibiting various degrees of autonomy from human agency even as they are mobilized by it. Because algorithmic processing lies at the heart of the design practices now reshaping our world -- from the physical spaces of our built environment to the networked spaces of digital culture -- the nature o...

Computer organization and design the hardware/software interface

CERN Document Server

Patterson, David A

2013-01-01

The 5th edition of Computer Organization and Design moves forward into the post-PC era with new examples, exercises, and material highlighting the emergence of mobile computing and the cloud. This generational change is emphasized and explored with updated content featuring tablet computers, cloud infrastructure, and the ARM (mobile computing devices) and x86 (cloud computing) architectures. Because an understanding of modern hardware is essential to achieving good performance and energy efficiency, this edition adds a new concrete example, "Going Faster," used throughout the text to demonstrate extremely effective optimization techniques. Also new to this edition is discussion of the "Eight Great Ideas" of computer architecture. As with previous editions, a MIPS processor is the core used to present the fundamentals of hardware technologies, assembly language, computer arithmetic, pipelining, memory hierarchies and I/O. Optimization techniques featured throughout the text. It covers parallelism in depth with...

Architecture and VHDL behavioural validation of a parallel processor dedicated to computer vision

International Nuclear Information System (INIS)

Collette, Thierry

1992-01-01

Speeding up image processing is mainly obtained using parallel computers; SIMD processors (single instruction stream, multiple data stream) have been developed, and have proven highly efficient regarding low-level image processing operations. Nevertheless, their performances drop for most intermediate of high level operations, mainly when random data reorganisations in processor memories are involved. The aim of this thesis was to extend the SIMD computer capabilities to allow it to perform more efficiently at the image processing intermediate level. The study of some representative algorithms of this class, points out the limits of this computer. Nevertheless, these limits can be erased by architectural modifications. This leads us to propose SYMPATIX, a new SIMD parallel computer. To valid its new concept, a behavioural model written in VHDL - Hardware Description Language - has been elaborated. With this model, the new computer performances have been estimated running image processing algorithm simulations. VHDL modeling approach allows to perform the system top down electronic design giving an easy coupling between system architectural modifications and their electronic cost. The obtained results show SYMPATIX to be an efficient computer for low and intermediate level image processing. It can be connected to a high level computer, opening up the development of new computer vision applications. This thesis also presents, a top down design method, based on the VHDL, intended for electronic system architects. (author) [fr

Research in Architecture & Design, Aalborg University 2009-2012

DEFF Research Database (Denmark)

Publication, presenting the research at Architecture & Design, Department of Architecture & Mediea Technology 2009-2012. Editor Gitte Marling......Publication, presenting the research at Architecture & Design, Department of Architecture & Mediea Technology 2009-2012. Editor Gitte Marling...

Software architecture as a set of architectural design decisions

NARCIS (Netherlands)

Jansen, Anton; Bosch, Jan; Nord, R; Medvidovic, N; Krikhaar, R; Khrhaar, R; Stafford, J; Bosch, J

2006-01-01

Software architectures have high costs for change, are complex, and erode during evolution. We believe these problems are partially due to knowledge vaporization. Currently, almost all the knowledge and information about the design decisions the architecture is based on are implicitly embedded in

The architectural design of networks of protein domain architectures.

Science.gov (United States)

Hsu, Chia-Hsin; Chen, Chien-Kuo; Hwang, Ming-Jing

2013-08-23

Protein domain architectures (PDAs), in which single domains are linked to form multiple-domain proteins, are a major molecular form used by evolution for the diversification of protein functions. However, the design principles of PDAs remain largely uninvestigated. In this study, we constructed networks to connect domain architectures that had grown out from the same single domain for every single domain in the Pfam-A database and found that there are three main distinctive types of these networks, which suggests that evolution can exploit PDAs in three different ways. Further analysis showed that these three different types of PDA networks are each adopted by different types of protein domains, although many networks exhibit the characteristics of more than one of the three types. Our results shed light on nature's blueprint for protein architecture and provide a framework for understanding architectural design from a network perspective.

Toward a Fault Tolerant Architecture for Vital Medical-Based Wearable Computing.

Science.gov (United States)

Abdali-Mohammadi, Fardin; Bajalan, Vahid; Fathi, Abdolhossein

2015-12-01

Advancements in computers and electronic technologies have led to the emergence of a new generation of efficient small intelligent systems. The products of such technologies might include Smartphones and wearable devices, which have attracted the attention of medical applications. These products are used less in critical medical applications because of their resource constraint and failure sensitivity. This is due to the fact that without safety considerations, small-integrated hardware will endanger patients' lives. Therefore, proposing some principals is required to construct wearable systems in healthcare so that the existing concerns are dealt with. Accordingly, this paper proposes an architecture for constructing wearable systems in critical medical applications. The proposed architecture is a three-tier one, supporting data flow from body sensors to cloud. The tiers of this architecture include wearable computers, mobile computing, and mobile cloud computing. One of the features of this architecture is its high possible fault tolerance due to the nature of its components. Moreover, the required protocols are presented to coordinate the components of this architecture. Finally, the reliability of this architecture is assessed by simulating the architecture and its components, and other aspects of the proposed architecture are discussed.

38 CFR 39.22 - Architectural design standards.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Architectural design...-16-10) Standards and Requirements for Project § 39.22 Architectural design standards. The..., Ontario, CA 91761-2816. (a) Architectural and structural requirements—(1) Life Safety Code. Standards must...

Cloud Computing for Mission Design and Operations

Science.gov (United States)

Arrieta, Juan; Attiyah, Amy; Beswick, Robert; Gerasimantos, Dimitrios

2012-01-01

The space mission design and operations community already recognizes the value of cloud computing and virtualization. However, natural and valid concerns, like security, privacy, up-time, and vendor lock-in, have prevented a more widespread and expedited adoption into official workflows. In the interest of alleviating these concerns, we propose a series of guidelines for internally deploying a resource-oriented hub of data and algorithms. These guidelines provide a roadmap for implementing an architecture inspired in the cloud computing model: associative, elastic, semantical, interconnected, and adaptive. The architecture can be summarized as exposing data and algorithms as resource-oriented Web services, coordinated via messaging, and running on virtual machines; it is simple, and based on widely adopted standards, protocols, and tools. The architecture may help reduce common sources of complexity intrinsic to data-driven, collaborative interactions and, most importantly, it may provide the means for teams and agencies to evaluate the cloud computing model in their specific context, with minimal infrastructure changes, and before committing to a specific cloud services provider.

JEM-X ISSW architectural design document

DEFF Research Database (Denmark)

Maisala, S.; Huovelin, J.; Westergaard, Niels Jørgen Stenfeldt

Detailed description of the architectural design of the JEM-X instrument specific software, to be delivered by SDAST to ISDC.......Detailed description of the architectural design of the JEM-X instrument specific software, to be delivered by SDAST to ISDC....

Roadmap to the SRS computing architecture

Energy Technology Data Exchange (ETDEWEB)

Johnson, A.

1994-07-05

This document outlines the major steps that must be taken by the Savannah River Site (SRS) to migrate the SRS information technology (IT) environment to the new architecture described in the Savannah River Site Computing Architecture. This document proposes an IT environment that is {open_quotes}...standards-based, data-driven, and workstation-oriented, with larger systems being utilized for the delivery of needed information to users in a client-server relationship.{close_quotes} Achieving this vision will require many substantial changes in the computing applications, systems, and supporting infrastructure at the site. This document consists of a set of roadmaps which provide explanations of the necessary changes for IT at the site and describes the milestones that must be completed to finish the migration.

Polymorphous Computing Architecture (PCA) Application Benchmark 1: Three-Dimensional Radar Data Processing

National Research Council Canada - National Science Library

Lebak, J

2001-01-01

The DARPA Polymorphous Computing Architecture (PCA) program is building advanced computer architectures that can reorganize their computation and communication structures to achieve better overall application performance...

Using Software Architectures for Designing Distributed Embedded Systems

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

In this paper, we outline an on-going project of designing distributed embedded systems for closed-loop process control. The project is a joint effort between software architecture researchers and developers from two companies that produce commercial embedded process control systems. The project...... has a strong emphasis on software architectural issues and terminology in order to envision, design and analyze design alternatives. We present two results. First, we outline how focusing on software architecture, architectural issues and qualities are beneficial in designing distributed, embedded......, systems. Second, we present two different architectures for closed-loop process control and discuss benefits and reliabilities....

A Computational Architecture for Programmable Automation Research

Science.gov (United States)

Taylor, Russell H.; Korein, James U.; Maier, Georg E.; Durfee, Lawrence F.

1987-03-01

This short paper describes recent work at the IBM T. J. Watson Research Center directed at developing a highly flexible computational architecture for research on sensor-based programmable automation. The system described here has been designed with a focus on dynamic configurability, layered user inter-faces and incorporation of sensor-based real time operations into new commands. It is these features which distinguish it from earlier work. The system is cur-rently being implemented at IBM for research purposes and internal use and is an outgrowth of programmable automation research which has been ongoing since 1972 [e.g., 1, 2, 3, 4, 5, 6] .

Peer-to-peer architectures for exascale computing : LDRD final report.

Energy Technology Data Exchange (ETDEWEB)

Vorobeychik, Yevgeniy; Mayo, Jackson R.; Minnich, Ronald G.; Armstrong, Robert C.; Rudish, Donald W.

2010-09-01

platforms. P2P architectures give us a starting point for crafting applications and system software for exascale. In the context of the Internet, P2P applications (e.g., file sharing, botnets) have already solved this problem for 10{sup 6}-10{sup 7} nodes. Usually based on a fractal distributed hash table structure, these systems have proven robust in practice to constant and unpredictable outages, failures, and even subversion. For example, a recent estimate of botnet turnover (i.e., the number of machines leaving and joining) is about 11% per week. Nonetheless, P2P networks remain effective despite these failures: The Conficker botnet has grown to {approx} 5 x 10{sup 6} peers. Unlike today's system software and applications, those for next-generation exascale machines cannot assume a static structure and, to be scalable over millions of nodes, must be decentralized. P2P architectures achieve both, and provide a promising model for 'fault-oblivious computing'. This project aimed to study the dynamics of P2P networks in the context of a design for exascale systems and applications. Having no single point of failure, the most successful P2P architectures are adaptive and self-organizing. While there has been some previous work applying P2P to message passing, little attention has been previously paid to the tightly coupled exascale domain. Typically, the per-node footprint of P2P systems is small, making them ideal for HPC use. The implementation on each peer node cooperates en masse to 'heal' disruptions rather than relying on a controlling 'master' node. Understanding this cooperative behavior from a complex systems viewpoint is essential to predicting useful environments for the inextricably unreliable exascale platforms of the future. We sought to obtain theoretical insight into the stability and large-scale behavior of candidate architectures, and to work toward leveraging Sandia's Emulytics platform to test promising candidates

Lunar Navigation Architecture Design Considerations

Science.gov (United States)

D'Souza, Christopher; Getchius, Joel; Holt, Greg; Moreau, Michael

2009-01-01

The NASA Constellation Program is aiming to establish a long-term presence on the lunar surface. The Constellation elements (Orion, Altair, Earth Departure Stage, and Ares launch vehicles) will require a lunar navigation architecture for navigation state updates during lunar-class missions. Orion in particular has baselined earth-based ground direct tracking as the primary source for much of its absolute navigation needs. However, due to the uncertainty in the lunar navigation architecture, the Orion program has had to make certain assumptions on the capabilities of such architectures in order to adequately scale the vehicle design trade space. The following paper outlines lunar navigation requirements, the Orion program assumptions, and the impacts of these assumptions to the lunar navigation architecture design. The selection of potential sites was based upon geometric baselines, logistical feasibility, redundancy, and abort support capability. Simulated navigation covariances mapped to entry interface flightpath- angle uncertainties were used to evaluate knowledge errors. A minimum ground station architecture was identified consisting of Goldstone, Madrid, Canberra, Santiago, Hartebeeshoek, Dongora, Hawaii, Guam, and Ascension Island (or the geometric equivalent).

ARCHITECTURE OF WEB BASED COMPUTER-AIDED MANUFACTURING SYSTEM

Directory of Open Access Journals (Sweden)

N. E. Filyukov

2014-09-01

Full Text Available The paper deals with design of a web-based system for Computer-Aided Manufacturing (CAM. Remote applications and databases located in the "private cloud" are proposed to be the basis of such system. The suggested approach contains: service - oriented architecture, using web applications and web services as modules, multi-agent technologies for implementation of information exchange functions between the components of the system and the usage of PDM - system for managing technology projects within the CAM. The proposed architecture involves CAM conversion into the corporate information system that will provide coordinated functioning of subsystems based on a common information space, as well as parallelize collective work on technology projects and be able to provide effective control of production planning. A system has been developed within this architecture which gives the possibility for a rather simple technological subsystems connect to the system and implementation of their interaction. The system makes it possible to produce CAM configuration for a particular company on the set of developed subsystems and databases specifying appropriate access rights for employees of the company. The proposed approach simplifies maintenance of software and information support for CAM subsystems due to their central location in the data center. The results can be used as a basis for CAM design and testing within the learning process for development and modernization of the system algorithms, and then can be tested in the extended enterprise.

Centaure: an heterogeneous parallel architecture for computer vision

International Nuclear Information System (INIS)

Peythieux, Marc

1997-01-01

This dissertation deals with the architecture of parallel computers dedicated to computer vision. In the first chapter, the problem to be solved is presented, as well as the architecture of the Sympati and Symphonie computers, on which this work is based. The second chapter is about the state of the art of computers and integrated processors that can execute computer vision and image processing codes. The third chapter contains a description of the architecture of Centaure. It has an heterogeneous structure: it is composed of a multiprocessor system based on Analog Devices ADSP21060 Sharc digital signal processor, and of a set of Symphonie computers working in a multi-SIMD fashion. Centaure also has a modular structure. Its basic node is composed of one Symphonie computer, tightly coupled to a Sharc thanks to a dual ported memory. The nodes of Centaure are linked together by the Sharc communication links. The last chapter deals with a performance validation of Centaure. The execution times on Symphonie and on Centaure of a benchmark which is typical of industrial vision, are presented and compared. In the first place, these results show that the basic node of Centaure allows a faster execution than Symphonie, and that increasing the size of the tested computer leads to a better speed-up with Centaure than with Symphonie. In the second place, these results validate the choice of running the low level structure of Centaure in a multi- SIMD fashion. (author) [fr

Modelling Approach In Islamic Architectural Designs

Directory of Open Access Journals (Sweden)

Suhaimi Salleh

2014-06-01

Full Text Available Architectural designs contribute as one of the main factors that should be considered in minimizing negative impacts in planning and structural development in buildings such as in mosques. In this paper, the ergonomics perspective is revisited which hence focuses on the conditional factors involving organisational, psychological, social and population as a whole. This paper tries to highlight the functional and architectural integration with ecstatic elements in the form of decorative and ornamental outlay as well as incorporating the building structure such as wall, domes and gates. This paper further focuses the mathematical aspects of the architectural designs such as polar equations and the golden ratio. These designs are modelled into mathematical equations of various forms, while the golden ratio in mosque is verified using two techniques namely, the geometric construction and the numerical method. The exemplary designs are taken from theSabah Bandaraya Mosque in Likas, Kota Kinabalu and the Sarawak State Mosque in Kuching,while the Universiti Malaysia Sabah Mosque is used for the Golden Ratio. Results show thatIslamic architectural buildings and designs have long had mathematical concepts and techniques underlying its foundation, hence, a modelling approach is needed to rejuvenate these Islamic designs.

The application of diagrams in architectural design

Directory of Open Access Journals (Sweden)

Dulić Olivera

2014-01-01

Full Text Available Diagrams in architecture represent the visualization of the thinking process, or selective abstraction of concepts or ideas translated into the form of drawings. In addition, they provide insight into the way of thinking about and in architecture, thus creating a balance between the visual and the conceptual. The subject of research presented in this paper are diagrams as a specific kind of architectural representation, and possibilities and importance of their application in the design process. Diagrams are almost old as architecture itself, and they are an element of some of the most important studies of architecture during all periods of history - which results in a large number of different definitions of diagrams, but also very different conceptualizations of their features, functions and applications. The diagrams become part of contemporary architectural discourse during the eighties and nineties of the twentieth century, especially through the work of architects like Bernard Tschumi, Peter Eisenman, Rem Koolhaas, SANAA and others. The use of diagrams in the design process allows unification of some of the essential aspects of the profession: architectural representation and design process, as well as the question of the concept of architectural and urban design at a time of rapid changes at all levels of contemporary society. The aim of the research is the analysis of the diagram as a specific medium for processing large amounts of information that the architect should consider and incorporate into the architectural work. On that basis, it is assumed that an architectural diagram allows the creator the identification and analysis of specific elements or ideas of physical form, thereby constantly maintaining concept of the integrity of the architectural work.

Designing Next Generation Massively Multithreaded Architectures for Irregular Applications

Energy Technology Data Exchange (ETDEWEB)

Tumeo, Antonino; Secchi, Simone; Villa, Oreste

2012-08-31

Irregular applications, such as data mining or graph-based computations, show unpredictable memory/network access patterns and control structures. Massively multi-threaded architectures with large node count, like the Cray XMT, have been shown to address their requirements better than commodity clusters. In this paper we present the approaches that we are currently pursuing to design future generations of these architectures. First, we introduce the Cray XMT and compare it to other multithreaded architectures. We then propose an evolution of the architecture, integrating multiple cores per node and next generation network interconnect. We advocate the use of hardware support for remote memory reference aggregation to optimize network utilization. For this evaluation we developed a highly parallel, custom simulation infrastructure for multi-threaded systems. Our simulator executes unmodified XMT binaries with very large datasets, capturing effects due to contention and hot-spotting, while predicting execution times with greater than 90% accuracy. We also discuss the FPGA prototyping approach that we are employing to study efficient support for irregular applications in next generation manycore processors.

A heterogeneous hierarchical architecture for real-time computing

Energy Technology Data Exchange (ETDEWEB)

Skroch, D.A.; Fornaro, R.J.

1988-12-01

The need for high-speed data acquisition and control algorithms has prompted continued research in the area of multiprocessor systems and related programming techniques. The result presented here is a unique hardware and software architecture for high-speed real-time computer systems. The implementation of a prototype of this architecture has required the integration of architecture, operating systems and programming languages into a cohesive unit. This report describes a Heterogeneous Hierarchial Architecture for Real-Time (H{sup 2} ART) and system software for program loading and interprocessor communication.

Teaching Creative Thinking through Architectural Design

Science.gov (United States)

Jeon, Kijeong; Cotner, Teresa L.

2010-01-01

Art and art education are open to broader definitions in the twenty-first century. It is time that teachers seriously think about including built environment design in K-12 art education. The term "built environment" includes interior design, architecture, landscape architecture, and urban planning. Due to increased exposure to built environment…

Tipster Text Phase 2 Architecture Design

Science.gov (United States)

1996-06-19

TIPSTER Text Phase II Architecture Design Version 2.1p 19 June 1996 Ralph Grishman New York University grishman @cs.nyu.edu and the TIPSTER...1996 2. REPORT TYPE 3. DATES COVERED 00-00-1996 to 00-00-1996 4. TITLE AND SUBTITLE TIPSTER Text Phase II Architecture Design 5a. CONTRACT

Cloud computing patterns fundamentals to design, build, and manage cloud applications

CERN Document Server

Fehling, Christoph; Retter, Ralph; Schupeck, Walter; Arbitter, Peter

2014-01-01

The current work provides CIOs, software architects, project managers, developers, and cloud strategy initiatives with a set of architectural patterns that offer nuggets of advice on how to achieve common cloud computing-related goals. The cloud computing patterns capture knowledge and experience in an abstract format that is independent of concrete vendor products. Readers are provided with a toolbox to structure cloud computing strategies and design cloud application architectures. By using this book cloud-native applications can be implemented and best suited cloud vendors and tooling for i

Performance evaluation of scientific programs on advanced architecture computers

International Nuclear Information System (INIS)

Walker, D.W.; Messina, P.; Baille, C.F.

1988-01-01

Recently a number of advanced architecture machines have become commercially available. These new machines promise better cost-performance then traditional computers, and some of them have the potential of competing with current supercomputers, such as the Cray X/MP, in terms of maximum performance. This paper describes an on-going project to evaluate a broad range of advanced architecture computers using a number of complete scientific application programs. The computers to be evaluated include distributed- memory machines such as the NCUBE, INTEL and Caltech/JPL hypercubes, and the MEIKO computing surface, shared-memory, bus architecture machines such as the Sequent Balance and the Alliant, very long instruction word machines such as the Multiflow Trace 7/200 computer, traditional supercomputers such as the Cray X.MP and Cray-2, and SIMD machines such as the Connection Machine. Currently 11 application codes from a number of scientific disciplines have been selected, although it is not intended to run all codes on all machines. Results are presented for two of the codes (QCD and missile tracking), and future work is proposed

Advanced customization in architectural design and construction

CERN Document Server

Naboni, Roberto

2015-01-01

This book presents the state of the art in advanced customization within the sector of architectural design and construction, explaining important new technologies that are boosting design, product and process innovation and identifying the challenges to be confronted as we move toward a mass customization construction industry. Advanced machinery and software integration are discussed, as well as an overview of the manufacturing techniques offered through digital methods that are acquiring particular significance within the field of digital architecture. CNC machining, Robotic Fabrication, and Additive Manufacturing processes are all clearly explained, highlighting their ability to produce personalized architectural forms and unique construction components. Cutting-edge case studies in digitally fabricated architectural realizations are described and, looking towards the future, a new model of 100% customized architecture for design and construction is presented. The book is an excellent guide to the profoun...

Design methods and design theory for architectural design management

NARCIS (Netherlands)

Achten, H.H.; Otter, den A.F.H.J.; Achten, H.H.; Pels, H.J.

2008-01-01

Most parties that an architectural design manager meets in daily practice are engaged to some degree with design. What these parties are actually doing in a project is contingent with the concrete design project. Additionally, each party has some stake, and may employ different strategies to solve

A learnable parallel processing architecture towards unity of memory and computing.

Science.gov (United States)

Li, H; Gao, B; Chen, Z; Zhao, Y; Huang, P; Ye, H; Liu, L; Liu, X; Kang, J

2015-08-14

Developing energy-efficient parallel information processing systems beyond von Neumann architecture is a long-standing goal of modern information technologies. The widely used von Neumann computer architecture separates memory and computing units, which leads to energy-hungry data movement when computers work. In order to meet the need of efficient information processing for the data-driven applications such as big data and Internet of Things, an energy-efficient processing architecture beyond von Neumann is critical for the information society. Here we show a non-von Neumann architecture built of resistive switching (RS) devices named "iMemComp", where memory and logic are unified with single-type devices. Leveraging nonvolatile nature and structural parallelism of crossbar RS arrays, we have equipped "iMemComp" with capabilities of computing in parallel and learning user-defined logic functions for large-scale information processing tasks. Such architecture eliminates the energy-hungry data movement in von Neumann computers. Compared with contemporary silicon technology, adder circuits based on "iMemComp" can improve the speed by 76.8% and the power dissipation by 60.3%, together with a 700 times aggressive reduction in the circuit area.

A learnable parallel processing architecture towards unity of memory and computing

Science.gov (United States)

Li, H.; Gao, B.; Chen, Z.; Zhao, Y.; Huang, P.; Ye, H.; Liu, L.; Liu, X.; Kang, J.

2015-08-01

Developing energy-efficient parallel information processing systems beyond von Neumann architecture is a long-standing goal of modern information technologies. The widely used von Neumann computer architecture separates memory and computing units, which leads to energy-hungry data movement when computers work. In order to meet the need of efficient information processing for the data-driven applications such as big data and Internet of Things, an energy-efficient processing architecture beyond von Neumann is critical for the information society. Here we show a non-von Neumann architecture built of resistive switching (RS) devices named “iMemComp”, where memory and logic are unified with single-type devices. Leveraging nonvolatile nature and structural parallelism of crossbar RS arrays, we have equipped “iMemComp” with capabilities of computing in parallel and learning user-defined logic functions for large-scale information processing tasks. Such architecture eliminates the energy-hungry data movement in von Neumann computers. Compared with contemporary silicon technology, adder circuits based on “iMemComp” can improve the speed by 76.8% and the power dissipation by 60.3%, together with a 700 times aggressive reduction in the circuit area.

Advanced information processing system: The Army Fault-Tolerant Architecture detailed design overview

Science.gov (United States)

Harper, Richard E.; Babikyan, Carol A.; Butler, Bryan P.; Clasen, Robert J.; Harris, Chris H.; Lala, Jaynarayan H.; Masotto, Thomas K.; Nagle, Gail A.; Prizant, Mark J.; Treadwell, Steven

1994-01-01

The Army Avionics Research and Development Activity (AVRADA) is pursuing programs that would enable effective and efficient management of large amounts of situational data that occurs during tactical rotorcraft missions. The Computer Aided Low Altitude Night Helicopter Flight Program has identified automated Terrain Following/Terrain Avoidance, Nap of the Earth (TF/TA, NOE) operation as key enabling technology for advanced tactical rotorcraft to enhance mission survivability and mission effectiveness. The processing of critical information at low altitudes with short reaction times is life-critical and mission-critical necessitating an ultra-reliable/high throughput computing platform for dependable service for flight control, fusion of sensor data, route planning, near-field/far-field navigation, and obstacle avoidance operations. To address these needs the Army Fault Tolerant Architecture (AFTA) is being designed and developed. This computer system is based upon the Fault Tolerant Parallel Processor (FTPP) developed by Charles Stark Draper Labs (CSDL). AFTA is hard real-time, Byzantine, fault-tolerant parallel processor which is programmed in the ADA language. This document describes the results of the Detailed Design (Phase 2 and 3 of a 3-year project) of the AFTA development. This document contains detailed descriptions of the program objectives, the TF/TA NOE application requirements, architecture, hardware design, operating systems design, systems performance measurements and analytical models.

Neuromorphic Computing – From Materials Research to Systems Architecture Roundtable

Energy Technology Data Exchange (ETDEWEB)

Schuller, Ivan K. [Univ. of California, San Diego, CA (United States); Stevens, Rick [Argonne National Lab. (ANL), Argonne, IL (United States); Univ. of Chicago, IL (United States); Pino, Robinson [Dept. of Energy (DOE) Office of Science, Washington, DC (United States); Pechan, Michael [Dept. of Energy (DOE) Office of Science, Washington, DC (United States)

2015-10-29

Computation in its many forms is the engine that fuels our modern civilization. Modern computation—based on the von Neumann architecture—has allowed, until now, the development of continuous improvements, as predicted by Moore’s law. However, computation using current architectures and materials will inevitably—within the next 10 years—reach a limit because of fundamental scientific reasons. DOE convened a roundtable of experts in neuromorphic computing systems, materials science, and computer science in Washington on October 29-30, 2015 to address the following basic questions: Can brain-like (“neuromorphic”) computing devices based on new material concepts and systems be developed to dramatically outperform conventional CMOS based technology? If so, what are the basic research challenges for materials sicence and computing? The overarching answer that emerged was: The development of novel functional materials and devices incorporated into unique architectures will allow a revolutionary technological leap toward the implementation of a fully “neuromorphic” computer. To address this challenge, the following issues were considered: The main differences between neuromorphic and conventional computing as related to: signaling models, timing/clock, non-volatile memory, architecture, fault tolerance, integrated memory and compute, noise tolerance, analog vs. digital, and in situ learning New neuromorphic architectures needed to: produce lower energy consumption, potential novel nanostructured materials, and enhanced computation Device and materials properties needed to implement functions such as: hysteresis, stability, and fault tolerance Comparisons of different implementations: spin torque, memristors, resistive switching, phase change, and optical schemes for enhanced breakthroughs in performance, cost, fault tolerance, and/or manufacturability.

Design and study of parallel computing environment of Monte Carlo simulation for particle therapy planning using a public cloud-computing infrastructure

International Nuclear Information System (INIS)

Yokohama, Noriya

2013-01-01

This report was aimed at structuring the design of architectures and studying performance measurement of a parallel computing environment using a Monte Carlo simulation for particle therapy using a high performance computing (HPC) instance within a public cloud-computing infrastructure. Performance measurements showed an approximately 28 times faster speed than seen with single-thread architecture, combined with improved stability. A study of methods of optimizing the system operations also indicated lower cost. (author)

System design in an evolving system-of-systems architecture and concept of operations

Science.gov (United States)

Rovekamp, Roger N., Jr.

Proposals for space exploration architectures have increased in complexity and scope. Constituent systems (e.g., rovers, habitats, in-situ resource utilization facilities, transfer vehicles, etc) must meet the needs of these architectures by performing in multiple operational environments and across multiple phases of the architecture's evolution. This thesis proposes an approach for using system-of-systems engineering principles in conjunction with system design methods (e.g., Multi-objective optimization, genetic algorithms, etc) to create system design options that perform effectively at both the system and system-of-systems levels, across multiple concepts of operations, and over multiple architectural phases. The framework is presented by way of an application problem that investigates the design of power systems within a power sharing architecture for use in a human Lunar Surface Exploration Campaign. A computer model has been developed that uses candidate power grid distribution solutions for a notional lunar base. The agent-based model utilizes virtual control agents to manage the interactions of various exploration and infrastructure agents. The philosophy behind the model is based both on lunar power supply strategies proposed in literature, as well as on the author's own approaches for power distribution strategies of future lunar bases. In addition to proposing a framework for system design, further implications of system-of-systems engineering principles are briefly explored, specifically as they relate to producing more robust cross-cultural system-of-systems architecture solutions.

Architectural Design of a LMS with LTSA-Conformance

Science.gov (United States)

Sengupta, Souvik; Dasgupta, Ranjan

2017-01-01

This paper illustrates an approach for architectural design of a Learning Management System (LMS), which is verifiable against the Learning Technology System Architecture (LTSA) conformance rules. We introduce a new method for software architectural design that extends the Unified Modeling Language (UML) component diagram with the formal…

Supporting Undergraduate Computer Architecture Students Using a Visual MIPS64 CPU Simulator

Science.gov (United States)

Patti, D.; Spadaccini, A.; Palesi, M.; Fazzino, F.; Catania, V.

2012-01-01

The topics of computer architecture are always taught using an Assembly dialect as an example. The most commonly used textbooks in this field use the MIPS64 Instruction Set Architecture (ISA) to help students in learning the fundamentals of computer architecture because of its orthogonality and its suitability for real-world applications. This…

Quantum Computing for Computer Architects

CERN Document Server

Metodi, Tzvetan

2011-01-01

Quantum computers can (in theory) solve certain problems far faster than a classical computer running any known classical algorithm. While existing technologies for building quantum computers are in their infancy, it is not too early to consider their scalability and reliability in the context of the design of large-scale quantum computers. To architect such systems, one must understand what it takes to design and model a balanced, fault-tolerant quantum computer architecture. The goal of this lecture is to provide architectural abstractions for the design of a quantum computer and to explore

Inclusive design in architectural practice: Experiential learning of disability in architectural education.

Science.gov (United States)

Mulligan, Kerry; Calder, Allyson; Mulligan, Hilda

2018-04-01

The built environment can facilitate or impede an individual's ability to participate in society. This is particularly so for people with disability. Architects are well placed to be advocates for design that enhances societal equality. This qualitative study explored architectural design students' perceptions of inclusive design, their reflections resulting from an experiential learning module and the subsequent influence of these on their design practice. Twenty four architectural design students participated in focus groups or individual interviews. Data were analyzed thematically. Three themes were evident: 1) Inclusive design was perceived as challenging, 2) Appreciation for the opportunity to learn about the perspectives of people with disabilities, and 3) Change of attitude toward inclusive design. Experiential learning had fostered reflection, changes in attitude and the realization that inclusive design, should begin at the start of the design process. For equitable access for all people to become reality, experiential learning, coupled with positive examples of inclusive design should be embedded in architectural education. Copyright © 2017 Elsevier Inc. All rights reserved.

Systemic Architecture

DEFF Research Database (Denmark)

Poletto, Marco; Pasquero, Claudia

-up or tactical design, behavioural space and the boundary of the natural and the artificial realms within the city and architecture. A new kind of "real-time world-city" is illustrated in the form of an operational design manual for the assemblage of proto-architectures, the incubation of proto-gardens...... and the coding of proto-interfaces. These prototypes of machinic architecture materialize as synthetic hybrids embedded with biological life (proto-gardens), computational power, behavioural responsiveness (cyber-gardens), spatial articulation (coMachines and fibrous structures), remote sensing (FUNclouds...

Nonexpert Evaluations on Architectural Design Creativity across Cultures

Science.gov (United States)

Hong, Seung Wan; Lee, Jae Seung

2015-01-01

This article examines the relationship between cultural differences and the nonexpert evaluations of architectural design creativity. In study I, Caucasian Americans (N = 126) and East Asians (N = 137), who did not major in architecture and urban design, evaluated the novelty and appropriateness of 5 unusual architectural shapes, selected by 5…

On public space design for Chinese urban residential area based on integrated architectural physics environment evaluation

Science.gov (United States)

Dong, J. Y.; Cheng, W.; Ma, C. P.; Tan, Y. T.; Xin, L. S.

2017-04-01

The residential public space is an important part in designing the ecological residence, and a proper physics environment of public space is of greater significance to urban residence in China. Actually, the measure to apply computer aided design software into residential design can effectively avoid an inconformity of design intent with actual using condition, and a negative impact on users due to bad architectural physics environment of buildings, etc. The paper largely adopts a design method of analyzing architectural physics environment of residential public space. By analyzing and evaluating various physics environments, a suitability assessment is obtained for residential public space, thereby guiding the space design.

Defining The Energy Saving Potential of Architectural Design

DEFF Research Database (Denmark)

Naboni, Emanuele; Malcangi, Antonio; Zhang, Yi

2015-01-01

Designers, in response to codes or voluntary " green building " programs, are increasingly concerned with building energy demand reduction, but they are not fully aware of the energy saving potential of architectural design. According to literature, building form, construction and material choices...... on sustainable design: " Design With Climate " by Olgyay (1963), which discussed strategies for climate-adapted architecture, and Lechner´s " Heating, Cooling and Lighting " (1991), on how to reduce building energy needs by as much as 60 – 80 percent with proper architectural design decisions. Both books used...... behaviour. The research shows the best solution for each of the climates and compares them with Olgyay´s findings. Finally, for each climate the energy saving potential is defined and then compared to Lechner's conclusions. Defining The Energy Saving Potential of Architectural Design (PDF Download Available...

Robotic fabrication in architecture, art and design 2014

CERN Document Server

Leon, Monica

2014-01-01

Robotic automation has become ubiquitous in the modern manufacturing landscape, spanning an overwhelming range of processes and applications-- from small scale force-controlled grinding operations for orthopedic joints to large scale composite manufacturing of aircraft fuselages. Smart factories, seamlessly linked via industrial networks and sensing, have revolutionized mass production, allowing for intelligent, adaptive manufacturing processes across a broad spectrum of industries. Against this background, an emerging group of researchers, designers, and fabricators have begun to apply robotic technology in the pursuit of architecture, art, and design, implementing them in a range of processes and scales. Coupled with computational design tools the technology is no longer relegated to the repetitive production of the assembly line, and is instead being employed for the mass-customization of non-standard components. This radical shift in protocol has been enabled by the development of new design to production...

Architecture and Design for Virtual Conferences: A Case Study

Directory of Open Access Journals (Sweden)

Andrew Sempere

2011-07-01

Full Text Available This paper presents a case study of the design issues facing a large multi-format virtual conference. The conference took place twice in two different years, each time using an avatar-based 3D world with spatialized audio including keynote, poster and social sessions. Between year 1 and 2, major adjustments were made to the architecture and design of the space, leading to improvement in the nature of interaction between the participants. While virtual meetings will likely never supplant the effectiveness of face-to-face meetings, this paper seeks to outline a few design principles learned from this experience, which can be applied generally to make computer mediated collaboration more effective.

Multicore technology architecture, reconfiguration, and modeling

CERN Document Server

Qadri, Muhammad Yasir

2013-01-01

The saturation of design complexity and clock frequencies for single-core processors has resulted in the emergence of multicore architectures as an alternative design paradigm. Nowadays, multicore/multithreaded computing systems are not only a de-facto standard for high-end applications, they are also gaining popularity in the field of embedded computing. The start of the multicore era has altered the concepts relating to almost all of the areas of computer architecture design, including core design, memory management, thread scheduling, application support, inter-processor communication, debu

Preference-Based Design in Architecture

NARCIS (Netherlands)

Binnekamp, R.

2010-01-01

Architectural design is a complex process as a result of two prominent characteristics of choice making: 1) multiple designs can fit into one intended purpose, which raises the question: how to choose the design that fits best, and 2) a multitude of decision makers have an interest in the design

Interior design and healing architecture

DEFF Research Database (Denmark)

Mogensen, Jeppe; Poulsen, Søren Bolvig; Hansen, Allan Grutt

2015-01-01

. Through a mixed-method study, 43 patients from the outpatient-lung department at Hospital Vendsyssel, Denmark were presented with different types of furniture and materials and were asked about their preferences. Additional questions on their experience of the hospital interior were asked to guide......Hospital design is today influenced by the design concept healing architecture, stating that the patients’ healing process is promoted through accommodating physical surroundings. However, despite the increasing amount of research in the field of healing architecture, research on interior design...... and materials are rather limited. To compliment research in hospital interior design with particular focus on the use of interior textiles, this pilot study explores if the patients’ preferences for more home-like hospital interiors can be linked to a preference for textile-based furniture and materials...

Transit safety retrofit package development : architecture and design specifications.

Science.gov (United States)

2014-05-01

The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical : objectives stated in the TRP requirements document. : The document begins with an architectural overview that identifies and descr...

Design of a real-time wind turbine simulator using a custom parallel architecture

Science.gov (United States)

Hoffman, John A.; Gluck, R.; Sridhar, S.

1995-01-01

The design of a new parallel-processing digital simulator is described. The new simulator has been developed specifically for analysis of wind energy systems in real time. The new processor has been named: the Wind Energy System Time-domain simulator, version 3 (WEST-3). Like previous WEST versions, WEST-3 performs many computations in parallel. The modules in WEST-3 are pure digital processors, however. These digital processors can be programmed individually and operated in concert to achieve real-time simulation of wind turbine systems. Because of this programmability, WEST-3 is very much more flexible and general than its two predecessors. The design features of WEST-3 are described to show how the system produces high-speed solutions of nonlinear time-domain equations. WEST-3 has two very fast Computational Units (CU's) that use minicomputer technology plus special architectural features that make them many times faster than a microcomputer. These CU's are needed to perform the complex computations associated with the wind turbine rotor system in real time. The parallel architecture of the CU causes several tasks to be done in each cycle, including an IO operation and the combination of a multiply, add, and store. The WEST-3 simulator can be expanded at any time for additional computational power. This is possible because the CU's interfaced to each other and to other portions of the simulation using special serial buses. These buses can be 'patched' together in essentially any configuration (in a manner very similar to the programming methods used in analog computation) to balance the input/ output requirements. CU's can be added in any number to share a given computational load. This flexible bus feature is very different from many other parallel processors which usually have a throughput limit because of rigid bus architecture.

Architectural Drawing - an Animate Field

DEFF Research Database (Denmark)

Hougaard, Anna Katrine

2015-01-01

Architectural drawing is changing because architects today draw with computers. Due to this change digital diagrams employed by computational architectural practices are often emphasized as powerful structures of control and organisation in the design process. But there are also diagrams, which d...

NET-COMPUTER: Internet Computer Architecture and its Application in E-Commerce

OpenAIRE

P. O. Umenne; M. O. Odhiambo

2012-01-01

Research in Intelligent Agents has yielded interesting results, some of which have been translated into commer­cial ventures. Intelligent Agents are executable software components that represent the user, perform tasks on behalf of the user and when the task terminates, the Agents send the result to the user. Intelligent Agents are best suited for the Internet: a collection of computers connected together in a world-wide computer network. Swarm and HYDRA computer architectures for Agents’ ex...

Low power design of wireless endoscopy compression/communication architecture

Directory of Open Access Journals (Sweden)

Zitouni Abdelkrim

2018-05-01

Full Text Available A wireless endoscopy capsule represents an efficient device interesting on the examination of digestive diseases. Many performance criteria’s (silicon area, dissipated power, image quality, computational time, etc. need to be deeply studied.In this paper, our interest is the optimization of the indicated criteria. The proposed methodology is based on exploring the advantages of the DCT/DWT transforms by combining them into single architecture. For arithmetic operations, the MCLA technique is used. This architecture integrates also a CABAC entropy coder that supports all binarization schemes. AMBA/I2C architecture is developed for assuring optimized communication.The comparisons of the proposed architecture with the most popular methods explained in related works show efficient results in terms dissipated power, hardware cost, and computation speed. Keywords: Wireless endoscopy capsule, DCT/DWT image compression, CABAC entropy coder, AMBA/I2C multi-bus architecture

Multiprocessor architecture: Synthesis and evaluation

Science.gov (United States)

Standley, Hilda M.

1990-01-01

Multiprocessor computed architecture evaluation for structural computations is the focus of the research effort described. Results obtained are expected to lead to more efficient use of existing architectures and to suggest designs for new, application specific, architectures. The brief descriptions given outline a number of related efforts directed toward this purpose. The difficulty is analyzing an existing architecture or in designing a new computer architecture lies in the fact that the performance of a particular architecture, within the context of a given application, is determined by a number of factors. These include, but are not limited to, the efficiency of the computation algorithm, the programming language and support environment, the quality of the program written in the programming language, the multiplicity of the processing elements, the characteristics of the individual processing elements, the interconnection network connecting processors and non-local memories, and the shared memory organization covering the spectrum from no shared memory (all local memory) to one global access memory. These performance determiners may be loosely classified as being software or hardware related. This distinction is not clear or even appropriate in many cases. The effect of the choice of algorithm is ignored by assuming that the algorithm is specified as given. Effort directed toward the removal of the effect of the programming language and program resulted in the design of a high-level parallel programming language. Two characteristics of the fundamental structure of the architecture (memory organization and interconnection network) are examined.

Optimization and mathematical modeling in computer architecture

CERN Document Server

Sankaralingam, Karu; Nowatzki, Tony

2013-01-01

In this book we give an overview of modeling techniques used to describe computer systems to mathematical optimization tools. We give a brief introduction to various classes of mathematical optimization frameworks with special focus on mixed integer linear programming which provides a good balance between solver time and expressiveness. We present four detailed case studies -- instruction set customization, data center resource management, spatial architecture scheduling, and resource allocation in tiled architectures -- showing how MILP can be used and quantifying by how much it outperforms t

Atomic switch networks-nanoarchitectonic design of a complex system for natural computing.

Science.gov (United States)

Demis, E C; Aguilera, R; Sillin, H O; Scharnhorst, K; Sandouk, E J; Aono, M; Stieg, A Z; Gimzewski, J K

2015-05-22

Self-organized complex systems are ubiquitous in nature, and the structural complexity of these natural systems can be used as a model to design new classes of functional nanotechnology based on highly interconnected networks of interacting units. Conventional fabrication methods for electronic computing devices are subject to known scaling limits, confining the diversity of possible architectures. This work explores methods of fabricating a self-organized complex device known as an atomic switch network and discusses its potential utility in computing. Through a merger of top-down and bottom-up techniques guided by mathematical and nanoarchitectonic design principles, we have produced functional devices comprising nanoscale elements whose intrinsic nonlinear dynamics and memorization capabilities produce robust patterns of distributed activity and a capacity for nonlinear transformation of input signals when configured in the appropriate network architecture. Their operational characteristics represent a unique potential for hardware implementation of natural computation, specifically in the area of reservoir computing-a burgeoning field that investigates the computational aptitude of complex biologically inspired systems.

Real-time FPGA architectures for computer vision

Science.gov (United States)

Arias-Estrada, Miguel; Torres-Huitzil, Cesar

2000-03-01

This paper presents an architecture for real-time generic convolution of a mask and an image. The architecture is intended for fast low level image processing. The FPGA-based architecture takes advantage of the availability of registers in FPGAs to implement an efficient and compact module to process the convolutions. The architecture is designed to minimize the number of accesses to the image memory and is based on parallel modules with internal pipeline operation in order to improve its performance. The architecture is prototyped in a FPGA, but it can be implemented on a dedicated VLSI to reach higher clock frequencies. Complexity issues, FPGA resources utilization, FPGA limitations, and real time performance are discussed. Some results are presented and discussed.

Computational Design Tools for Integrated Design

DEFF Research Database (Denmark)

Holst, Malene Kirstine; Kirkegaard, Poul Henning

2010-01-01

In an architectural conceptual sketching process, where an architect is working with the initial ideas for a design, the process is characterized by three phases: sketching, evaluation and modification. Basically the architect needs to address three areas in the conceptual sketching phase......: aesthetical, functional and technical requirements. The aim of the present paper is to address the problem of a vague or not existing link between digital conceptual design tools used by architects and designers and engineering analysis and simulation tools. Based on an analysis of the architectural design...... process different digital design methods are related to tasks in an integrated design process....

Innovation in Deep Space Habitat Interior Design: Lessons Learned From Small Space Design in Terrestrial Architecture

Science.gov (United States)

Simon, Matthew A.; Toups, Larry

2014-01-01

Increased public awareness of carbon footprints, crowding in urban areas, and rising housing costs have spawned a 'small house movement' in the housing industry. Members of this movement desire small, yet highly functional residences which are both affordable and sensitive to consumer comfort standards. In order to create comfortable, minimum-volume interiors, recent advances have been made in furniture design and approaches to interior layout that improve both space utilization and encourage multi-functional design for small homes, apartments, naval, and recreational vehicles. Design efforts in this evolving niche of terrestrial architecture can provide useful insights leading to innovation and efficiency in the design of space habitats for future human space exploration missions. This paper highlights many of the cross-cutting architectural solutions used in small space design which are applicable to the spacecraft interior design problem. Specific solutions discussed include reconfigurable, multi-purpose spaces; collapsible or transformable furniture; multi-purpose accommodations; efficient, space saving appliances; stowable and mobile workstations; and the miniaturization of electronics and computing hardware. For each of these design features, descriptions of how they save interior volume or mitigate other small space issues such as confinement stress or crowding are discussed. Finally, recommendations are provided to provide guidance for future designs and identify potential collaborations with the small spaces design community.

Landscape Architectural Design as Scientific Inquiry?

NARCIS (Netherlands)

Lenzholzer, S.

2011-01-01

This presentation discusses ‘landscape architectural design as scientific inquiry’ and exemplifies this with the description of a design process within climate-responsive design leading to new design knowledge. ‘Research and design’ are issues that need increasing attention within landscape

Computing Architecture of the ALICE Detector Control System

CERN Document Server

Augustinus, A; Moreno, A; Kurepin, A N; De Cataldo, G; Pinazza, O; Rosinský, P; Lechman, M; Jirdén, L S

2011-01-01

The ALICE Detector Control System (DCS) is based on a commercial SCADA product, running on a large Windows computer cluster. It communicates with about 1200 network attached devices to assure safe and stable operation of the experiment. In the presentation we focus on the design of the ALICE DCS computer systems. We describe the management of data flow, mechanisms for handling the large data amounts and information exchange with external systems. One of the key operational requirements is an intuitive, error proof and robust user interface allowing for simple operation of the experiment. At the same time the typical operator task, like trending or routine checks of the devices, must be decoupled from the automated operation in order to prevent overload of critical parts of the system. All these requirements must be implemented in an environment with strict security requirements. In the presentation we explain how these demands affected the architecture of the ALICE DCS.

Renewing Theories, Methods and Design Practices: Challenges for Architectural Education

Directory of Open Access Journals (Sweden)

Andri Yatmo Yandi

2018-01-01

Full Text Available Architectural education should promote the advancement of knowledge that is necessary as the basis for the development of excellent design practice. Architectural education needs to respond appropriately to the current issues in the society. To find its way into the society in an appropriate way, architecture needs to be liquid. The ability to address the liquidity of architecture requires educational approach that promotes the ability to work with a range of design methods and approaches. There are several principles that become the basis for developing architectural education that could strengthen its position within the society: to promote knowledge-based design practice, to embrace variety of design methods and approaches; to keep a balance between design knowledge and design skills; while at the same time to aim for mastery and excellence in design. These principles should be the basis for defining and developing the curriculum and the process of design learning architectural education. Then the main challenge is on our willingness to be liquid in developing architectural education, which needs continuous renewal and update to respond to the changing context of knowledge, technology and society.

Design Methods for Young Sustainable Architecture Practice

OpenAIRE

Jauslin, D.; Drexler, H.; Curiel, F.

2012-01-01

This paper introduces landscape aesthetics as an innovative design method for sustainable architecture. It is based on the framework of a recent paper where the young and unfamous authors criticized three of the most prominent? architects today in regard to sustainable architecture and its aesthetics. Leading architects expressed their skepticism as to whether there is such a thing as aesthetics in sustainable architecture, or for that matter, if architecture can indeed be sustainable at all....

What professionals consider when designing a modular service architecture

NARCIS (Netherlands)

Broekhuis, Manda; van Offenbeek, Marjolein; van der Laan, Monique

2017-01-01

Abstract Purpose: The paper explores how functional and appropriateness arguments influence the adoption of modularity principles during the design of a professional service architecture. Design: Action design research was conducted to examine the design process of a modular service architecture for

Smart SOA platforms in cloud computing architectures

CERN Document Server

Exposito , Ernesto

2014-01-01

This book is intended to introduce the principles of the Event-Driven and Service-Oriented Architecture (SOA 2.0) and its role in the new interconnected world based on the cloud computing architecture paradigm. In this new context, the concept of "service" is widely applied to the hardware and software resources available in the new generation of the Internet. The authors focus on how current and future SOA technologies provide the basis for the smart management of the service model provided by the Platform as a Service (PaaS) layer.

Automated Design of Application-Specific Smart Camera Architectures

NARCIS (Netherlands)

Caarls, W.

2008-01-01

Parallel heterogeneous multiprocessor systems are often shunned in embedded system design, not only because of their design complexity but because of the programming burden. Programs for such systems are architecture-dependent: the application developer needs architecture-specific knowledge to

TEACHING CAD PROGRAMMING TO ARCHITECTURE STUDENTS

Directory of Open Access Journals (Sweden)

Maria Gabriela Caffarena CELANI

2008-11-01

Full Text Available The objective of this paper is to discuss the relevance of including the discipline of computer programming in the architectural curriculum. To do so I start by explaining how computer programming has been applied in other educational contexts with pedagogical success, describing Seymour Papert's principles. After that, I summarize the historical development of CAD and provide three historical examples of educational applications of computer programming in architecture, followed by a contemporary case that I find of particular relevance. Next, I propose a methodology for teaching programming for architects that aims at improving the quality of designs by making their concepts more explicit. This methodology is based on my own experience teaching computer programming for architecture students at undergraduate and graduate levels at the State University of Campinas, Brazil. The paper ends with a discussion about the role of programming nowadays, when most CAD software are user-friendly and do not require any knowledge of programming for improving performance. I conclude that the introduction of programming in the CAD curriculum within a proper conceptual framework may transform the concept of architectural education. Key-words: Computer programming; computer-aided design; architectural education.

Advanced Concept Architecture Design and Integrated Analysis (ACADIA)

Science.gov (United States)

2017-11-03

1 Advanced Concept Architecture Design and Integrated Analysis (ACADIA) Submitted to the National Institute of Aerospace (NIA) on...Research Report 20161001 - 20161030 Advanced Concept Architecture Design and Integrated Analysis (ACADIA) W911NF-16-2-0229 8504Cedric Justin, Youngjun

3D-SoftChip: A Novel Architecture for Next-Generation Adaptive Computing Systems

Directory of Open Access Journals (Sweden)

Lee Mike Myung-Ok

2006-01-01

Full Text Available This paper introduces a novel architecture for next-generation adaptive computing systems, which we term 3D-SoftChip. The 3D-SoftChip is a 3-dimensional (3D vertically integrated adaptive computing system combining state-of-the-art processing and 3D interconnection technology. It comprises the vertical integration of two chips (a configurable array processor and an intelligent configurable switch through an indium bump interconnection array (IBIA. The configurable array processor (CAP is an array of heterogeneous processing elements (PEs, while the intelligent configurable switch (ICS comprises a switch block, 32-bit dedicated RISC processor for control, on-chip program/data memory, data frame buffer, along with a direct memory access (DMA controller. This paper introduces the novel 3D-SoftChip architecture for real-time communication and multimedia signal processing as a next-generation computing system. The paper further describes the advanced HW/SW codesign and verification methodology, including high-level system modeling of the 3D-SoftChip using SystemC, being used to determine the optimum hardware specification in the early design stage.

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2014-07-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

Designing flexible engineering systems utilizing embedded architecture options

Science.gov (United States)

Pierce, Jeff G.

This dissertation develops and applies an integrated framework for embedding flexibility in an engineered system architecture. Systems are constantly faced with unpredictability in the operational environment, threats from competing systems, obsolescence of technology, and general uncertainty in future system demands. Current systems engineering and risk management practices have focused almost exclusively on mitigating or preventing the negative consequences of uncertainty. This research recognizes that high uncertainty also presents an opportunity to design systems that can flexibly respond to changing requirements and capture additional value throughout the design life. There does not exist however a formalized approach to designing appropriately flexible systems. This research develops a three stage integrated flexibility framework based on the concept of architecture options embedded in the system design. Stage One defines an eight step systems engineering process to identify candidate architecture options. This process encapsulates the operational uncertainty though scenario development, traces new functional requirements to the affected design variables, and clusters the variables most sensitive to change. The resulting clusters can generate insight into the most promising regions in the architecture to embed flexibility in the form of architecture options. Stage Two develops a quantitative option valuation technique, grounded in real options theory, which is able to value embedded architecture options that exhibit variable expiration behavior. Stage Three proposes a portfolio optimization algorithm, for both discrete and continuous options, to select the optimal subset of architecture options, subject to budget and risk constraints. Finally, the feasibility, extensibility and limitations of the framework are assessed by its application to a reconnaissance satellite system development problem. Detailed technical data, performance models, and cost estimates

[The architectural design of psychiatric care buildings].

Science.gov (United States)

Dunet, Lionel

2012-01-01

The architectural design of psychiatric care buildings. In addition to certain "classic" creations, the Dunet architectural office has designed several units for difficult patients as well as a specially adapted hospitalisation unit. These creations which are demanding in terms of the organisation of care require close consultation with the nursing teams. Testimony of an architect who is particularly engaged in the universe of psychiatry.

Transportable GPU (General Processor Units) chip set technology for standard computer architectures

Science.gov (United States)

Fosdick, R. E.; Denison, H. C.

1982-11-01

The USAFR-developed GPU Chip Set has been utilized by Tracor to implement both USAF and Navy Standard 16-Bit Airborne Computer Architectures. Both configurations are currently being delivered into DOD full-scale development programs. Leadless Hermetic Chip Carrier packaging has facilitated implementation of both architectures on single 41/2 x 5 substrates. The CMOS and CMOS/SOS implementations of the GPU Chip Set have allowed both CPU implementations to use less than 3 watts of power each. Recent efforts by Tracor for USAF have included the definition of a next-generation GPU Chip Set that will retain the application-proven architecture of the current chip set while offering the added cost advantages of transportability across ISO-CMOS and CMOS/SOS processes and across numerous semiconductor manufacturers using a newly-defined set of common design rules. The Enhanced GPU Chip Set will increase speed by an approximate factor of 3 while significantly reducing chip counts and costs of standard CPU implementations.

Architectural design of experience based factory model for software ...

African Journals Online (AJOL)

architectural design. Automation features are incorporated in the design in which workflow system and intelligent agents are integrated, and the facilitation of cloud environment is empowered to further support the automation. Keywords: architectural design; knowledge management; experience factory; workflow;

Selecting an Architecture for a Safety-Critical Distributed Computer System with Power, Weight and Cost Considerations

Science.gov (United States)

Torres-Pomales, Wilfredo

2014-01-01

This report presents an example of the application of multi-criteria decision analysis to the selection of an architecture for a safety-critical distributed computer system. The design problem includes constraints on minimum system availability and integrity, and the decision is based on the optimal balance of power, weight and cost. The analysis process includes the generation of alternative architectures, evaluation of individual decision criteria, and the selection of an alternative based on overall value. In this example presented here, iterative application of the quantitative evaluation process made it possible to deliberately generate an alternative architecture that is superior to all others regardless of the relative importance of cost.

A synchronous distributed cloud-based virtual reality meeting system for architectural and urban design

Directory of Open Access Journals (Sweden)

Lei Sun

2014-12-01

Full Text Available In the spatial design fields such as architectural design and urban design, a consensus-building process among a variety of stakeholders like project executors, architects, residents, users, and general citizens is required. New technological developments such as cloud computing and Virtual Design Studios (VDS enable the creation of virtual meeting systems. This paper proposes an approach towards a synchronous distributed design meeting system. In this paper, in addition to sharing a 3D virtual space for a synchronous distributed type design meeting, we developed a prototype system that enables participants to sketch or make annotations and have discussions as well as add viewpoints to them. We applied these functions to evaluate an architectural design and urban landscape examination. In conclusion, the proposed method was evaluated as being effective and feasible. Yet, it shows a few shortcomings including the fact that simultaneous operation is limited to one client, and more arbitrary shapes should be supported in future versions of the application.

Three-Dimensional Nanobiocomputing Architectures With Neuronal Hypercells

Science.gov (United States)

2007-06-01

Neumann architectures, and CMOS fabrication. Novel solutions of massive parallel distributed computing and processing (pipelined due to systolic... and processing platforms utilizing molecular hardware within an enabling organization and architecture. The design technology is based on utilizing a...Microsystems and Nanotechnologies investigated a novel 3D3 (Hardware Software Nanotechnology) technology to design super-high performance computing

Architectural Design Propaedeutics in Russia: History and Prospects

Science.gov (United States)

Lee, I. S.

2017-11-01

Architectural design propaedeutics is the introductory course of the composition basics which largely determines the process of professional training of an architect and a designer and the result of their work in the form of artistically meaningful artificial human environment. The article gives a brief overview of the history of propedeutics development in Russia, the experience of application and the prospects of development of the methods used to teach the basics of composition to future professionals. The article considered the main direction of the VKHUTEMAS development, Moscow Architectural Institute. Further, the paper identifies he connection of propedeutics with the architectural and design practice of the corresponding period. The article addresses to the author’s personal experiences related to the composition basics learning at Moscow Architectural Institute in the 70-ies of the last century. Besides, it presents the examples of the works made by the students from South Ural State University at the Chair of Design and Fine Arts.

Heterogeneous computing architecture for fast detection of SNP-SNP interactions.

Science.gov (United States)

Sluga, Davor; Curk, Tomaz; Zupan, Blaz; Lotric, Uros

2014-06-25

The extent of data in a typical genome-wide association study (GWAS) poses considerable computational challenges to software tools for gene-gene interaction discovery. Exhaustive evaluation of all interactions among hundreds of thousands to millions of single nucleotide polymorphisms (SNPs) may require weeks or even months of computation. Massively parallel hardware within a modern Graphic Processing Unit (GPU) and Many Integrated Core (MIC) coprocessors can shorten the run time considerably. While the utility of GPU-based implementations in bioinformatics has been well studied, MIC architecture has been introduced only recently and may provide a number of comparative advantages that have yet to be explored and tested. We have developed a heterogeneous, GPU and Intel MIC-accelerated software module for SNP-SNP interaction discovery to replace the previously single-threaded computational core in the interactive web-based data exploration program SNPsyn. We report on differences between these two modern massively parallel architectures and their software environments. Their utility resulted in an order of magnitude shorter execution times when compared to the single-threaded CPU implementation. GPU implementation on a single Nvidia Tesla K20 runs twice as fast as that for the MIC architecture-based Xeon Phi P5110 coprocessor, but also requires considerably more programming effort. General purpose GPUs are a mature platform with large amounts of computing power capable of tackling inherently parallel problems, but can prove demanding for the programmer. On the other hand the new MIC architecture, albeit lacking in performance reduces the programming effort and makes it up with a more general architecture suitable for a wider range of problems.

Application of ant colony Algorithm and particle swarm optimization in architectural design

Science.gov (United States)

Song, Ziyi; Wu, Yunfa; Song, Jianhua

2018-02-01

By studying the development of ant colony algorithm and particle swarm algorithm, this paper expounds the core idea of the algorithm, explores the combination of algorithm and architectural design, sums up the application rules of intelligent algorithm in architectural design, and combines the characteristics of the two algorithms, obtains the research route and realization way of intelligent algorithm in architecture design. To establish algorithm rules to assist architectural design. Taking intelligent algorithm as the beginning of architectural design research, the authors provide the theory foundation of ant colony Algorithm and particle swarm algorithm in architectural design, popularize the application range of intelligent algorithm in architectural design, and provide a new idea for the architects.

Reflective Subjects in Kant and Architectural Design Education

Science.gov (United States)

Rawes, Peg

2007-01-01

In architectural design education, students develop drawing, conceptual, and critical skills which are informed by their ability to reflect upon the production of ideas in design processes and in the urban, environmental, social, historical, and cultural context that define architecture and the built environment. Reflective actions and thinking…

Symbiotic architecture: Redefinition of recycling design principles

OpenAIRE

Milan Šijaković; Ana Perić

2018-01-01

The study seeks to examine the possibility of implementing the biological concept of symbiosis into the field of architecture for redefining the design principles of architectural recycling. Through an in-depth analysis of the biological concept of symbiosis (i.e., a close and often long-term interaction between two or more different biological species and the criteria that govern the differentiation between symbiotic associations), three redefined design principles of recycling—commensalism,...

The Impact of Basic Architectural Design

DEFF Research Database (Denmark)

Naboni, Emanuele; Malcangi, Antonio

2015-01-01

The research explores the impact of the shape, construction type, materials and components of buildings and users' scenarios – on buildings' key energy loads (heating, cooling and lighting) in Copenhagen's climate. Applying a genetic algorithm, a search space consisting of over 408,000 simulated ...... by proper basic design choices based on energy simulation coupled with genetic optimization. The Impact of Basic Architectural Design. Thinking beyond BR10 and Passivhaus Standard Prescriptions with the Use of Genetic Optimization (PDF Download Available). Available from: https......://www.researchgate.net/publication/287994281_The_Impact_of_Basic_Architectural_Design_Thinking_beyond_BR10_and_Passivhaus_Standard_Prescriptions_with_the_Use_of_Genetic_Optimization [accessed Jan 21, 2016]....

Exploring Socio-material Orderings in Ethnography of Architectural Design

DEFF Research Database (Denmark)

Lotz, Katrine; Stang Våland, Marianne

How can the socio-material assemblages involved in contemporary ‘doings of architecture’ be identified and studied? The paper discusses recent transformations within architectural design practice and the extended network of local actors and technologies mobilized in contemporary building...... construction. Interested in examining how the current requirements in the field are – and can be - handled in architectural production, we aim to contribute to the ongoing development of ethnography of Architectural Design (Yaneva 2008, 2009, 2012). In our research, we focus on recent requirements...... in contemporary architectural design. We attempt to follow the actors in detail through their socio-material involvements and ‘architectural inventions’ such as visualized motives of space, materials, atmospheres, buildingparts and -components, and to explore how relations continuously tie and untie as a means...

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2010-06-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisa­tion focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as prag­matic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

Computer architecture evaluation for structural dynamics computations: Project summary

Science.gov (United States)

Standley, Hilda M.

1989-01-01

The intent of the proposed effort is the examination of the impact of the elements of parallel architectures on the performance realized in a parallel computation. To this end, three major projects are developed: a language for the expression of high level parallelism, a statistical technique for the synthesis of multicomputer interconnection networks based upon performance prediction, and a queueing model for the analysis of shared memory hierarchies.

The Exploration of Green Architecture Design Integration Teaching Mode

Science.gov (United States)

Shuang, Liang; Yibin, Han

2016-01-01

With the deepening of the concept of green building design, the course of university education gradually exposed many problems in the teaching of architectural design theory; based on the existing mode of teaching and combined with the needs of architectural design practice it proposed the "integrated" method of green building design. It…

Biomimetics for architecture & design nature, analogies, technology

CERN Document Server

Pohl, Göran

2015-01-01

This book provides the readers with a timely guide to the application of biomimetic principles in architecture and engineering design. As a result of a combined effort by two internationally recognized authorities, the biologist Werner Nachtigall and the architect Göran Pohl, the book describes the principles which can be used to compare nature and technology, and at the same time it presents detailed explanations and examples showing how biology can be used as a source of inspiration and “translated” in building and architectural solutions (biomimicry). Even though nature cannot be directly copied, the living world can provide architects and engineers with a wealth of analogues and inspirations for their own creative designs. But how can analysis of natural entities give rise to advanced and sustainable design? By reporting on the latest bionic design methods and using extensive artwork, the book guides readers through the field of nature-inspired architecture, offering an extraordinary resource for pro...

SYSTEMATIC DESIGNING IN ARCHITECTURAL EDUCATION: AN EXPERIENCE OF HOSPITAL DESIGN

Directory of Open Access Journals (Sweden)

Dicle AYDIN

2010-07-01

Full Text Available Architectural design is defined as decision-making process. Design studios play an important role in experiencing this process and provide the competence of design to prospective architects. The instructors of architecture aim to compel the imagination of the students develop creative thinking, raising the awareness among students about their abilities. Furthermore, executives of the studios pay attention to delimitative elements in design in order to provide the competence of problem solving for students. Each experience in education period prepares the prospective architects for the social environment and the realities of the future. The aim of the study is to examine a practicing in architectural education. The general hospital project was carried out with 40 students and 4 project executives within the 2007-2008 academic year Spring Semester Studio-7 courses. The steps followed in the studio process were analyzed with the design problem of “hospital”. Evaluations were performed on; the solution of functional-spatial organization, solutions about the activities of the users, convenience with the standards and regulations and prosperity-aesthetic notions in internal space. Prospective architects generally became successful in the design of hospital building with complex function. This experience raised awareness about access to information via thinking, provision of a new position for information in each concept.

Using business critical design rules to frame new architecture introduction in multi-architecture portfolios

DEFF Research Database (Denmark)

Løkkegaard, Martin; Mortensen, Niels Henrik; Hvam, Lars

2018-01-01

component sharing, or sharing critical design principles. This alignment is not trivial, as extensive design knowledge is needed to overview a portfolio with many, often highly different products and manufacturing lines. In this paper, we suggest establishing a frame of reference for new......When introducing new architectures to an industrial portfolio, counting multiple existing product and manufacturing solutions, time-to-market and investments in manufacturing equipment can be significantly reduced if new concepts are aligned with the existing portfolio. This can be done through......-product introduction based on several ‘game rules’, or Business Critical Design Rules (BCDRs), which denote the most critical features of the product and manufacturing architectures, and should be considered an obligatory reference for design when introducing new architectures. BCDRs are derived from the portfolio...

T and D-Bench--Innovative Combined Support for Education and Research in Computer Architecture and Embedded Systems

Science.gov (United States)

Soares, S. N.; Wagner, F. R.

2011-01-01

Teaching and Design Workbench (T&D-Bench) is a framework aimed at education and research in the areas of computer architecture and embedded systems. It includes a set of features not found in other educational environments. This set of features is the result of an original combination of design requirements for T&D-Bench: that the…

ELASTIC CLOUD COMPUTING ARCHITECTURE AND SYSTEM FOR HETEROGENEOUS SPATIOTEMPORAL COMPUTING

Directory of Open Access Journals (Sweden)

X. Shi

2017-10-01

Full Text Available Spatiotemporal computation implements a variety of different algorithms. When big data are involved, desktop computer or standalone application may not be able to complete the computation task due to limited memory and computing power. Now that a variety of hardware accelerators and computing platforms are available to improve the performance of geocomputation, different algorithms may have different behavior on different computing infrastructure and platforms. Some are perfect for implementation on a cluster of graphics processing units (GPUs, while GPUs may not be useful on certain kind of spatiotemporal computation. This is the same situation in utilizing a cluster of Intel's many-integrated-core (MIC or Xeon Phi, as well as Hadoop or Spark platforms, to handle big spatiotemporal data. Furthermore, considering the energy efficiency requirement in general computation, Field Programmable Gate Array (FPGA may be a better solution for better energy efficiency when the performance of computation could be similar or better than GPUs and MICs. It is expected that an elastic cloud computing architecture and system that integrates all of GPUs, MICs, and FPGAs could be developed and deployed to support spatiotemporal computing over heterogeneous data types and computational problems.

Elastic Cloud Computing Architecture and System for Heterogeneous Spatiotemporal Computing

Science.gov (United States)

Shi, X.

2017-10-01

Spatiotemporal computation implements a variety of different algorithms. When big data are involved, desktop computer or standalone application may not be able to complete the computation task due to limited memory and computing power. Now that a variety of hardware accelerators and computing platforms are available to improve the performance of geocomputation, different algorithms may have different behavior on different computing infrastructure and platforms. Some are perfect for implementation on a cluster of graphics processing units (GPUs), while GPUs may not be useful on certain kind of spatiotemporal computation. This is the same situation in utilizing a cluster of Intel's many-integrated-core (MIC) or Xeon Phi, as well as Hadoop or Spark platforms, to handle big spatiotemporal data. Furthermore, considering the energy efficiency requirement in general computation, Field Programmable Gate Array (FPGA) may be a better solution for better energy efficiency when the performance of computation could be similar or better than GPUs and MICs. It is expected that an elastic cloud computing architecture and system that integrates all of GPUs, MICs, and FPGAs could be developed and deployed to support spatiotemporal computing over heterogeneous data types and computational problems.

Design of low-power coarse-grained reconfigurable architectures

CERN Document Server

Kim, Yoonjin

2010-01-01

Coarse-grained reconfigurable architecture (CGRA) has emerged as a solution for flexible, application-specific optimization of embedded systems. Helping you understand the issues involved in designing and constructing embedded systems, Design of Low-Power Coarse-Grained Reconfigurable Architectures offers new frameworks for optimizing the architecture of components in embedded systems in order to decrease area and save power. Real application benchmarks and gate-level simulations substantiate these frameworks.The first half of the book explains how to reduce power in the configuration cache. T

Expanding color design methods for architecture and allied disciplines

Science.gov (United States)

Linton, Harold E.

2002-06-01

The color design processes of visual artists, architects, designers, and theoreticians included in this presentation reflect the practical role of color in architecture. What the color design professional brings to the architectural design team is an expertise and rich sensibility made up of a broad awareness and a finely tuned visual perception. This includes a knowledge of design and its history, expertise with industrial color materials and their methods of application, an awareness of design context and cultural identity, a background in physiology and psychology as it relates to human welfare, and an ability to problem-solve and respond creatively to design concepts with innovative ideas. The broadening of the definition of the colorists's role in architectural design provides architects, artists and designers with significant opportunities for continued professional and educational development.

Architectural Drawing - an Animate Field

DEFF Research Database (Denmark)

Hougaard, Anna Katrine

2015-01-01

Architectural drawing is changing because architects today draw with computers. Due to this change digital diagrams employed by computational architectural practices are often emphasized as powerful structures of control and organisation in the design process. But there are also diagrams, which do...... ways of directing behaviour of artefacts and living things without controlling this behaviour completely. I analyse a musical composition by John Cage as an example of a sketch diagram, and then hypothesize that orthogonal, architectural drawing can work in similar ways. Thereby I hope to point out...... important affordance of architectural drawing as a ¬hybrid between the openness of hand-sketching and the rule-based-ness of diagramming, an affordance which might be useful in the migrational zone of current architectural drawing where traditional hand drawing techniques and computer drawing techniques...

Contributing to the design of run-time systems dedicated to high performance computing

International Nuclear Information System (INIS)

Perache, M.

2006-10-01

In the field of intensive scientific computing, the quest for performance has to face the increasing complexity of parallel architectures. Nowadays, these machines exhibit a deep memory hierarchy which complicates the design of efficient parallel applications. This thesis proposes a programming environment allowing to design efficient parallel programs on top of clusters of multi-processors. It features a programming model centered around collective communications and synchronizations, and provides load balancing facilities. The programming interface, named MPC, provides high level paradigms which are optimized according to the underlying architecture. The environment is fully functional and used within the CEA/DAM (TERANOVA) computing center. The evaluations presented in this document confirm the relevance of our approach. (author)

Parametric Approach in Designing Large-Scale Urban Architectural Objects

Directory of Open Access Journals (Sweden)

Arne Riekstiņš

2011-04-01

Full Text Available When all the disciplines of various science fields converge and develop, new approaches to contemporary architecture arise. The author looks towards approaching digital architecture from parametric viewpoint, revealing its generative capacity, originating from the fields of aeronautical, naval, automobile and product-design industries. The author also goes explicitly through his design cycle workflow for testing the latest methodologies in architectural design. The design process steps involved: extrapolating valuable statistical data about the site into three-dimensional diagrams, defining certain materiality of what is being produced, ways of presenting structural skin and structure simultaneously, contacting the object with the ground, interior program definition of the building with floors and possible spaces, logic of fabrication, CNC milling of the proto-type. The author’s developed tool that is reviewed in this article features enormous performative capacity and is applicable to various architectural design scales.Article in English

Low Cost Design of a Hybrid Architecture of Integer Inverse DCT for H.264, VC-1, AVS, and HEVC

Directory of Open Access Journals (Sweden)

Muhammad Martuza

2012-01-01

Full Text Available The paper presents a unified hybrid architecture to compute the 8×8 integer inverse discrete cosine transform (IDCT of multiple modern video codecs—AVS, H.264/AVC, VC-1, and HEVC (under development. Based on the symmetric structure of the matrices and the similarity in matrix operation, we develop a generalized “decompose and share” algorithm to compute the 8×8 IDCT. The algorithm is later applied to four video standards. The hardware-share approach ensures the maximum circuit reuse during the computation. The architecture is designed with only adders and shifters to reduce the hardware cost significantly. The design is implemented on FPGA and later synthesized in CMOS 0.18 um technology. The results meet the requirements of advanced video coding applications.

Cloud Computing Security in Openstack Architecture: General Overview

Directory of Open Access Journals (Sweden)

Gleb Igorevich Shakulo

2015-10-01

Full Text Available The subject of article is cloud computing security. Article begins with author analyzing cloud computing advantages and disadvantages, factors of growth, both positive and negative. Among latter, security is deemed one of the most prominent. Furthermore, author takes architecture of OpenStack project as an example for study: describes its essential components and their interconnection. As conclusion, author raises series of questions as possible areas of further research to resolve security concerns, thus making cloud computing more secure technology.

TEACHING DESIGN AT THE LIMITS OF ARCHITECTURE

Directory of Open Access Journals (Sweden)

Nikos A. Salingaros

2010-07-01

Full Text Available Pre-industrial architects inherently knew the effectual dimension of design through its materiality, detail, and form. Until now, the intellectual dichotomy of human thinking held that mind and body were separate entities, drawing a distinction between reasoned thought and feeling. The early Greek philosophers distinguished between these two realms. Theories on beauty, the human aesthetic impulse, and design were divided along the objective and subjective lines for centuries. In more current architectural terms, the objective dimension of industry gave structure and perceived virtue to the modernist paradigm, while at the same time clearing the way (tabula rasa for the rampant subjectivity we now see in the idiosyncratic expressions of so many contemporary architects. By revealing the relationship between our physical and mental processes, neuroscience re-situates the debate on physical reality well outside the intellectual enterprise of aesthetically driven design. Clear measures can now be evidenced, documented, and applied to establish a new, more effective, and humanly engaging way to build. This new architecture draws upon those mechanisms of neuro-connectivity that help us to feel safe and secure.   From this knowledge we have developed a new model for building/rebuilding the world, called Intelligence-Based Design. Intelligence-Based Design is the purposeful manipulation of the built environment to engage humans in an essential manner through complex organized information. Intelligence-Based Theory evidences the direct neurological evaluations of surface, structure, pattern, texture, and form, etc., and maintains that our sense of well being is established through positive neuro-engagement with the physical world at the deepest level common to all people, i.e. “Innate Intelligence.” This paper describes a senior architectural design studio taught using the precepts of Intelligence-Based Design. We describe our methodology, and the

Design Methods for Young Sustainable Architecture Practice

NARCIS (Netherlands)

Jauslin, D.; Drexler, H.; Curiel, F.

2012-01-01

This paper introduces landscape aesthetics as an innovative design method for sustainable architecture. It is based on the framework of a recent paper where the young and unfamous authors criticized three of the most prominent? architects today in regard to sustainable architecture and its

Application architecture for .NET designing applications and services

CERN Document Server

Microsoft. Redmond

2003-01-01

Get expert architectural and design-level guidance for building distributed solutions with the Microsoft® .NET Framework-learning how to synthesize your knowledge of application development, servers, and infrastructure and business requirements. This guide assumes you are familiar with .NET component development and the basic principles of a layered distributed application design. It examines architectural issues and solution design for a range of project stakeholders-whether you build and design applications and services, recommend appropriate technologies and products for applications and s

An FPGA-Based Quantum Computing Emulation Framework Based on Serial-Parallel Architecture

Directory of Open Access Journals (Sweden)

Y. H. Lee

2016-01-01

Full Text Available Hardware emulation of quantum systems can mimic more efficiently the parallel behaviour of quantum computations, thus allowing higher processing speed-up than software simulations. In this paper, an efficient hardware emulation method that employs a serial-parallel hardware architecture targeted for field programmable gate array (FPGA is proposed. Quantum Fourier transform and Grover’s search are chosen as case studies in this work since they are the core of many useful quantum algorithms. Experimental work shows that, with the proposed emulation architecture, a linear reduction in resource utilization is attained against the pipeline implementations proposed in prior works. The proposed work contributes to the formulation of a proof-of-concept baseline FPGA emulation framework with optimization on datapath designs that can be extended to emulate practical large-scale quantum circuits.

Collaboration within Student Design Teams Participating in Architectural Design Competitions

Science.gov (United States)

Erbil, Livanur; Dogan, Fehmi

2012-01-01

This paper investigates design collaboration with reference to convergent and divergent idea generation processes in architectural design teams entering a design competition. Study of design teams offer a unique opportunity to investigate how creativity is fostered through collaborative work. While views of creativity often relate creativity to…

Linking Humans to Data: Designing an Enterprise Architecture for EarthCube

Science.gov (United States)

Xu, C.; Yang, C.; Meyer, C. B.

2013-12-01

National Science Foundation (NSF)'s EarthCube is a strategic initiative towards a grand enterprise that holistically incorporates different geoscience research domains. The EarthCube as envisioned by NSF is a community-guided cyberinfrastructure (NSF 2011). The design of EarthCube enterprise architecture (EA) offers a vision to harmonize processes between the operations of EarthCube and its information technology foundation, the geospatial cyberinfrastructure. (Yang et al. 2010). We envision these processes as linking humans to data. We report here on fundamental ideas that would ultimately materialize as a conceptual design of EarthCube EA. EarthCube can be viewed as a meta-science that seeks to advance knowledge of the Earth through cross-disciplinary connections made using conventional domain-based earth science research. In order to build capacity that enables crossing disciplinary chasms, a key step would be to identify the cornerstones of the envisioned enterprise architecture. Human and data inputs are the two key factors to the success of EarthCube (NSF 2011), based upon which three hypotheses have been made: 1) cross disciplinary collaboration has to be achieved through data sharing; 2) disciplinary differences need to be articulated and captured in both computer and human understandable formats; 3) human intervention is crucial for crossing the disciplinary chasms. We have selected the Federal Enterprise Architecture Framework (FEAF, CIO Council 2013) as the baseline for the envisioned EarthCube EA, noting that the FEAF's deficiencies can be improved upon with inputs from three other popular EA frameworks. This presentation reports the latest on the conceptual design of an enterprise architecture in support of EarthCube.

An architecture design and realization of the industrial CT visualization system

International Nuclear Information System (INIS)

Gao Long; Li Zheng; Zhang Li; Gao Wenhuan; Kang Kejun

2003-01-01

The Industrial Computer Tomography (ICT) is an ideal and powerful technique for inspecting and evaluating the integrity of many large and complex structures. Three dimension visualization system is the main component of ICT inspection. This paper gives an architecture design and the realization of ICT visualization system on the basis of the system analysis. A new adaptive precision algorithm is brought out to solve the main problem of interactive speed. The paper also discussed the future research intention

The Fermilab central computing facility architectural model

International Nuclear Information System (INIS)

Nicholls, J.

1989-01-01

The goal of the current Central Computing Upgrade at Fermilab is to create a computing environment that maximizes total productivity, particularly for high energy physics analysis. The Computing Department and the Next Computer Acquisition Committee decided upon a model which includes five components: an interactive front-end, a Large-Scale Scientific Computer (LSSC, a mainframe computing engine), a microprocessor farm system, a file server, and workstations. With the exception of the file server, all segments of this model are currently in production: a VAX/VMS cluster interactive front-end, an Amdahl VM Computing engine, ACP farms, and (primarily) VMS workstations. This paper will discuss the implementation of the Fermilab Central Computing Facility Architectural Model. Implications for Code Management in such a heterogeneous environment, including issues such as modularity and centrality, will be considered. Special emphasis will be placed on connectivity and communications between the front-end, LSSC, and workstations, as practiced at Fermilab. (orig.)

The Fermilab Central Computing Facility architectural model

International Nuclear Information System (INIS)

Nicholls, J.

1989-05-01

The goal of the current Central Computing Upgrade at Fermilab is to create a computing environment that maximizes total productivity, particularly for high energy physics analysis. The Computing Department and the Next Computer Acquisition Committee decided upon a model which includes five components: an interactive front end, a Large-Scale Scientific Computer (LSSC, a mainframe computing engine), a microprocessor farm system, a file server, and workstations. With the exception of the file server, all segments of this model are currently in production: a VAX/VMS Cluster interactive front end, an Amdahl VM computing engine, ACP farms, and (primarily) VMS workstations. This presentation will discuss the implementation of the Fermilab Central Computing Facility Architectural Model. Implications for Code Management in such a heterogeneous environment, including issues such as modularity and centrality, will be considered. Special emphasis will be placed on connectivity and communications between the front-end, LSSC, and workstations, as practiced at Fermilab. 2 figs

Design and Verification of Remote Sensing Image Data Center Storage Architecture Based on Hadoop

Science.gov (United States)

Tang, D.; Zhou, X.; Jing, Y.; Cong, W.; Li, C.

2018-04-01

The data center is a new concept of data processing and application proposed in recent years. It is a new method of processing technologies based on data, parallel computing, and compatibility with different hardware clusters. While optimizing the data storage management structure, it fully utilizes cluster resource computing nodes and improves the efficiency of data parallel application. This paper used mature Hadoop technology to build a large-scale distributed image management architecture for remote sensing imagery. Using MapReduce parallel processing technology, it called many computing nodes to process image storage blocks and pyramids in the background to improve the efficiency of image reading and application and sovled the need for concurrent multi-user high-speed access to remotely sensed data. It verified the rationality, reliability and superiority of the system design by testing the storage efficiency of different image data and multi-users and analyzing the distributed storage architecture to improve the application efficiency of remote sensing images through building an actual Hadoop service system.

Design and reliability analysis of DP-3 dynamic positioning control architecture

Science.gov (United States)

Wang, Fang; Wan, Lei; Jiang, Da-Peng; Xu, Yu-Ru

2011-12-01

As the exploration and exploitation of oil and gas proliferate throughout deepwater area, the requirements on the reliability of dynamic positioning system become increasingly stringent. The control objective ensuring safety operation at deep water will not be met by a single controller for dynamic positioning. In order to increase the availability and reliability of dynamic positioning control system, the triple redundancy hardware and software control architectures were designed and developed according to the safe specifications of DP-3 classification notation for dynamically positioned ships and rigs. The hardware redundant configuration takes the form of triple-redundant hot standby configuration including three identical operator stations and three real-time control computers which connect each other through dual networks. The function of motion control and redundancy management of control computers were implemented by software on the real-time operating system VxWorks. The software realization of task loose synchronization, majority voting and fault detection were presented in details. A hierarchical software architecture was planed during the development of software, consisting of application layer, real-time layer and physical layer. The behavior of the DP-3 dynamic positioning control system was modeled by a Markov model to analyze its reliability. The effects of variation in parameters on the reliability measures were investigated. The time domain dynamic simulation was carried out on a deepwater drilling rig to prove the feasibility of the proposed control architecture.

Move-tecture: A Conceptual Framework for Designing Movement in Architecture

Science.gov (United States)

Yilmaz, Irem

2017-10-01

Along with the technological improvements in our age, it is now possible for the movement to become one of the basic components of the architectural space. Accordingly, architectural construction of movement changes both our architectural production practices and our understanding of architectural space. However, existing design concepts and approaches are insufficient to discuss and understand this change. In this respect, this study aims to form a conceptual framework on the relationship of architecture and movement. In this sense, the conceptualization of move-tecture is developed to research on the architectural construction of movement and the potentials of spatial creation through architecturally constructed movement. Move-tecture, is a conceptualization that treats movement as a basic component of spatial creation. It presents the framework of a qualitative categorization on the design of moving architectural structures. However, this categorization is a flexible one that can evolve in the direction of the expanding possibilities of the architectural design and the changing living conditions. With this understanding, six categories have been defined within the context of the article: Topological Organization, Choreographic Formation, Kinetic Structuring, Corporeal Constitution, Technological Configuration and Interactional Patterning. In line with these categories, a multifaceted perspective on the moving architectural structures is promoted. It is aimed that such an understanding constitutes a new initiative in the design practices carried out in this area and provides a conceptual basis for the discussions to be developed.

Atomic switch networks—nanoarchitectonic design of a complex system for natural computing

International Nuclear Information System (INIS)

Demis, E C; Aguilera, R; Sillin, H O; Scharnhorst, K; Sandouk, E J; Gimzewski, J K; Aono, M; Stieg, A Z

2015-01-01

Self-organized complex systems are ubiquitous in nature, and the structural complexity of these natural systems can be used as a model to design new classes of functional nanotechnology based on highly interconnected networks of interacting units. Conventional fabrication methods for electronic computing devices are subject to known scaling limits, confining the diversity of possible architectures. This work explores methods of fabricating a self-organized complex device known as an atomic switch network and discusses its potential utility in computing. Through a merger of top-down and bottom-up techniques guided by mathematical and nanoarchitectonic design principles, we have produced functional devices comprising nanoscale elements whose intrinsic nonlinear dynamics and memorization capabilities produce robust patterns of distributed activity and a capacity for nonlinear transformation of input signals when configured in the appropriate network architecture. Their operational characteristics represent a unique potential for hardware implementation of natural computation, specifically in the area of reservoir computing—a burgeoning field that investigates the computational aptitude of complex biologically inspired systems. (paper)

Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

International Nuclear Information System (INIS)

1994-09-01

This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole

A Declarative Approach to Architectural Reflection

DEFF Research Database (Denmark)

Ingstrup, Mads; Hansen, Klaus Marius

2005-01-01

which both creates runtime models of specific distributed architectures and allow for evaluation of AQL queries on these models. We illustrate the viability of the approach in two particular applications of such a model: constraint checking relative to an architectural style, and reasoning about certain......Recent research shows runtime architectural reflection is instrumental in, for instance, building adaptive and flexible systems or checking correspondence between design and implementation. Moreover, experience with computational reflection in various branches of computer science shows...... that the interface through which the meta-information of the running system is accessed, and possibly modified, lies at the heart of designing reflective systems. This paper proposes that such an interface should be like a database: accessed through queries expressed using the concepts with which architecture...

Using EDUCache Simulator for the Computer Architecture and Organization Course

Directory of Open Access Journals (Sweden)

Sasko Ristov

2013-07-01

Full Text Available The computer architecture and organization course is essential in all computer science and engineering programs, and the most selected and liked elective course for related engineering disciplines. However, the attractiveness brings a new challenge, it requires a lot of effort by the instructor, to explain rather complicated concepts to beginners or to those who study related disciplines. The usage of visual simulators can improve both the teaching and learning processes. The overall goal is twofold: 1~to enable a visual environment to explain the basic concepts and 2~to increase the student's willingness and ability to learn the material.A lot of visual simulators have been used for the computer architecture and organization course. However, due to the lack of visual simulators for simulation of the cache memory concepts, we have developed a new visual simulator EDUCache simulator. In this paper we present that it can be effectively and efficiently used as a supporting tool in the learning process of modern multi-layer, multi-cache and multi-core multi-processors.EDUCache's features enable an environment for performance evaluation and engineering of software systems, i.e. the students will also understand the importance of computer architecture building parts and hopefully, will increase their curiosity for hardware courses in general.

Design Principles for E-Government Architectures

Science.gov (United States)

Sandoz, Alain

The paper introduces a holistic approach for architecting systems which must sustain the entire e-government activity of a public authority. Four principles directly impact the architecture: Legality, Responsibility, Transparency, and Symmetry leading to coherent representations of the architecture for the client, the designer and the builder. The approach enables to deploy multipartite, distributed public services, including legal delegation of roles and outsourcing of non mandatory tasks through PPP.

Research and Design in Landscape Architecture

NARCIS (Netherlands)

Nijhuis, S.; Bobbink, I.; Jauslin, D.T.

2011-01-01

This paper aims to introduce the particular methodology of the author's and their colleagues at TU Delft Chair of Landscape Architecture. This approach is characterised by theories, methods and techniques converging towards design and research and research by design. The relation and interaction

Integration of highly probabilistic sources into optical quantum architectures: perpetual quantum computation

International Nuclear Information System (INIS)

Devitt, Simon J; Stephens, Ashley M; Munro, William J; Nemoto, Kae

2011-01-01

In this paper, we introduce a design for an optical topological cluster state computer constructed exclusively from a single quantum component. Unlike previous efforts we eliminate the need for on demand, high fidelity photon sources and detectors and replace them with the same device utilized to create photon/photon entanglement. This introduces highly probabilistic elements into the optical architecture while maintaining complete specificity of the structure and operation for a large-scale computer. Photons in this system are continually recycled back into the preparation network, allowing for an arbitrarily deep three-dimensional cluster to be prepared using a comparatively small number of photonic qubits and consequently the elimination of high-frequency, deterministic photon sources.

The Field Trip as Part of Spatial (Architectural) Design Art Classes

Science.gov (United States)

Batic, Janja

2011-01-01

Spatial (architectural) design is one of five fields introduced to pupils as part of art education. In planning architectural design tasks, one should take into consideration the particularities of the architectural design process and enable pupils to experience space and relationships within space through their own movement. Furthermore, pupils…

Change Impact Analysis of Crosscutting in Software Architectural Design

NARCIS (Netherlands)

van den Berg, Klaas

2006-01-01

Software architectures should be amenable to changes in user requirements and implementation technology. The analysis of the impact of these changes can be based on traceability of architectural design elements. Design elements have dependencies with other software artifacts but also evolve in time.

Life-cycle design for sustainable architecture

Directory of Open Access Journals (Sweden)

Francesca Thiébat

2013-05-01

Full Text Available Sustainability in architecture should involve environmental and social aspects and also economic aspects. However, in a design process budget issues usually outweigh ecological aspects. How can we then drive clients and builders to put more socially responsible buildings on the market that do not exceed the fixed budget but are environmentally friendly? This paper propose an economic and environmental assessment tool to aid private or public building designers and owners to find the global sustainability value of a green building within a life cycle perspective. Sustainable life cycle tools for buildings design and construction help to achieve successfully integrated architecture. The research here presented proposes a new point of view of the “time-cost-quality triangle” of Project Management, by introducing three further aspects: environment, society and aesthetics.

VLSI Architecture for Configurable and Low-Complexity Design of Hard-Decision Viterbi Decoding Algorithm

Directory of Open Access Journals (Sweden)

Rachmad Vidya Wicaksana Putra

2016-06-01

Full Text Available Convolutional encoding and data decoding are fundamental processes in convolutional error correction. One of the most popular error correction methods in decoding is the Viterbi algorithm. It is extensively implemented in many digital communication applications. Its VLSI design challenges are about area, speed, power, complexity and configurability. In this research, we specifically propose a VLSI architecture for a configurable and low-complexity design of a hard-decision Viterbi decoding algorithm. The configurable and low-complexity design is achieved by designing a generic VLSI architecture, optimizing each processing element (PE at the logical operation level and designing a conditional adapter. The proposed design can be configured for any predefined number of trace-backs, only by changing the trace-back parameter value. Its computational process only needs N + 2 clock cycles latency, with N is the number of trace-backs. Its configurability function has been proven for N = 8, N = 16, N = 32 and N = 64. Furthermore, the proposed design was synthesized and evaluated in Xilinx and Altera FPGA target boards for area consumption and speed performance.

LTSA Conformance Testing to Architectural Design of LMS Using Ontology

Science.gov (United States)

Sengupta, Souvik; Dasgupta, Ranjan

2017-01-01

This paper proposes a new methodology for checking conformance of the software architectural design of Learning Management System (LMS) to Learning Technology System Architecture (LTSA). In our approach, the architectural designing of LMS follows the formal modeling style of Acme. An ontology is built to represent the LTSA rules and the software…

Managing the complexity of collective architectural designing

NARCIS (Netherlands)

Sebastian, R.

2006-01-01

This paper addresses the complexity of architectural designing whereby multiple designer work in close collaboration to conceive the design of an integrated building project at urban context. collaborative design conception has only recently been observed as a phenomenon of the built environment

The ATLAS Analysis Architecture

International Nuclear Information System (INIS)

Cranmer, K.S.

2008-01-01

We present an overview of the ATLAS analysis architecture including the relevant aspects of the computing model and the major architectural aspects of the Athena framework. Emphasis will be given to the interplay between the analysis use cases and the technical aspects of the architecture including the design of the event data model, transient-persistent separation, data reduction strategies, analysis tools, and ROOT interoperability

Architecture and Urban Studies to offer overseas design course

OpenAIRE

Chadwick, Heather Riley

2006-01-01

Virginia Tech's College of Architecture and Urban Studies invites professional architects and designers to participate in the 11th annual International Architecture and Design Continuing Education Course in Italy to be held in May. The deadline to register for this course is Saturday, April 15.

Parametric Architectural Design with Point-clouds

DEFF Research Database (Denmark)

Zwierzycki, Mateusz; Evers, Henrik Leander; Tamke, Martin

2016-01-01

This paper investigates the efforts and benefits of the implementation of point clouds into architectural design processes and tools. Based on a study on the principal work processes of designers with point clouds the prototypical plugin/library - Volvox - was developed for the parametric modelling...

The Jupyter/IPython architecture: a unified view of computational research, from interactive exploration to communication and publication.

Science.gov (United States)

Ragan-Kelley, M.; Perez, F.; Granger, B.; Kluyver, T.; Ivanov, P.; Frederic, J.; Bussonnier, M.

2014-12-01

IPython has provided terminal-based tools for interactive computing in Python since 2001. The notebook document format and multi-process architecture introduced in 2011 have expanded the applicable scope of IPython into teaching, presenting, and sharing computational work, in addition to interactive exploration. The new architecture also allows users to work in any language, with implementations in Python, R, Julia, Haskell, and several other languages. The language agnostic parts of IPython have been renamed to Jupyter, to better capture the notion that a cross-language design can encapsulate commonalities present in computational research regardless of the programming language being used. This architecture offers components like the web-based Notebook interface, that supports rich documents that combine code and computational results with text narratives, mathematics, images, video and any media that a modern browser can display. This interface can be used not only in research, but also for publication and education, as notebooks can be converted to a variety of output formats, including HTML and PDF. Recent developments in the Jupyter project include a multi-user environment for hosting notebooks for a class or research group, a live collaboration notebook via Google Docs, and better support for languages other than Python.

Computer Architecture for Energy Efficient SFQ

Science.gov (United States)

2014-08-27

IBM Corporation (T.J. Watson Research Laboratory) 1101 Kitchawan Road Yorktown Heights, NY 10598 -0000 2 ABSTRACT Number of Papers published in peer...accomplished during this ARO-sponsored project at IBM Research to identify and model an energy efficient SFQ-based computer architecture. The... IBM Windsor Blue (WB), illustrated schematically in Figure 2. The basic building block of WB is a "tile" comprised of a 64-bit arithmetic logic unit

Cloud Computing Security in Openstack Architecture: General Overview

OpenAIRE

Gleb Igorevich Shakulo

2015-01-01

The subject of article is cloud computing security. Article begins with author analyzing cloud computing advantages and disadvantages, factors of growth, both positive and negative. Among latter, security is deemed one of the most prominent. Furthermore, author takes architecture of OpenStack project as an example for study: describes its essential components and their interconnection. As conclusion, author raises series of questions as possible areas of further research to resolve security c...

A Concept Transformation Learning Model for Architectural Design Learning Process

Science.gov (United States)

Wu, Yun-Wu; Weng, Kuo-Hua; Young, Li-Ming

2016-01-01

Generally, in the foundation course of architectural design, much emphasis is placed on teaching of the basic design skills without focusing on teaching students to apply the basic design concepts in their architectural designs or promoting students' own creativity. Therefore, this study aims to propose a concept transformation learning model to…

Healthy eating design guidelines for school architecture.

Science.gov (United States)

Huang, Terry T-K; Sorensen, Dina; Davis, Steven; Frerichs, Leah; Brittin, Jeri; Celentano, Joseph; Callahan, Kelly; Trowbridge, Matthew J

2013-01-01

We developed a new tool, Healthy Eating Design Guidelines for School Architecture, to provide practitioners in architecture and public health with a practical set of spatially organized and theory-based strategies for making school environments more conducive to learning about and practicing healthy eating by optimizing physical resources and learning spaces. The design guidelines, developed through multidisciplinary collaboration, cover 10 domains of the school food environment (eg, cafeteria, kitchen, garden) and 5 core healthy eating design principles. A school redesign project in Dillwyn, Virginia, used the tool to improve the schools' ability to adopt a healthy nutrition curriculum and promote healthy eating. The new tool, now in a pilot version, is expected to evolve as its components are tested and evaluated through public health and design research.

Specification, Design, and Analysis of Advanced HUMS Architectures

Science.gov (United States)

Mukkamala, Ravi

2004-01-01

During the two-year project period, we have worked on several aspects of domain-specific architectures for HUMS. In particular, we looked at using scenario-based approach for the design and designed a language for describing such architectures. The language is now being used in all aspects of our HUMS design. In particular, we have made contributions in the following areas. 1) We have employed scenarios in the development of HUMS in three main areas. They are: (a) To improve reusability by using scenarios as a library indexing tool and as a domain analysis tool; (b) To improve maintainability by recording design rationales from two perspectives - problem domain and solution domain; (c) To evaluate the software architecture. 2) We have defined a new architectural language called HADL or HUMS Architectural Definition Language. It is a customized version of xArch/xADL. It is based on XML and, hence, is easily portable from domain to domain, application to application, and machine to machine. Specifications written in HADL can be easily read and parsed using the currently available XML parsers. Thus, there is no need to develop a plethora of software to support HADL. 3) We have developed an automated design process that involves two main techniques: (a) Selection of solutions from a large space of designs; (b) Synthesis of designs. However, the automation process is not an absolute Artificial Intelligence (AI) approach though it uses a knowledge-based system that epitomizes a specific HUMS domain. The process uses a database of solutions as an aid to solve the problems rather than creating a new design in the literal sense. Since searching is adopted as the main technique, the challenges involved are: (a) To minimize the effort in searching the database where a very large number of possibilities exist; (b) To develop representations that could conveniently allow us to depict design knowledge evolved over many years; (c) To capture the required information that aid the

Computational composites

DEFF Research Database (Denmark)

Vallgårda, Anna K. A.; Redström, Johan

2007-01-01

Computational composite is introduced as a new type of composite material. Arguing that this is not just a metaphorical maneuver, we provide an analysis of computational technology as material in design, which shows how computers share important characteristics with other materials used in design...... and architecture. We argue that the notion of computational composites provides a precise understanding of the computer as material, and of how computations need to be combined with other materials to come to expression as material. Besides working as an analysis of computers from a designer’s point of view......, the notion of computational composites may also provide a link for computer science and human-computer interaction to an increasingly rapid development and use of new materials in design and architecture....

A Trusted Computing Architecture of Embedded System Based on Improved TPM

Directory of Open Access Journals (Sweden)

Wang Xiaosheng

2017-01-01

Full Text Available The Trusted Platform Module (TPM currently used by PCs is not suitable for embedded systems, it is necessary to improve existing TPM. The paper proposes a trusted computing architecture with new TPM and the cryptographic system developed by China for the embedded system. The improved TPM consists of the Embedded System Trusted Cryptography Module (eTCM and the Embedded System Trusted Platform Control Module (eTPCM, which are combined and implemented the TPM’s autonomous control, active defense, high-speed encryption/decryption and other function through its internal bus arbitration module and symmetric and asymmetric cryptographic engines to effectively protect the security of embedded system. In our improved TPM, a trusted measurement method with chain model and star type model is used. Finally, the improved TPM is designed by FPGA, and it is used to a trusted PDA to carry out experimental verification. Experiments show that the trusted architecture of the embedded system based on the improved TPM is efficient, reliable and secure.

Architectural design and analysis of a programmable image processor

International Nuclear Information System (INIS)

Siyal, M.Y.; Chowdhry, B.S.; Rajput, A.Q.K.

2003-01-01

In this paper we present an architectural design and analysis of a programmable image processor, nicknamed Snake. The processor was designed with a high degree of parallelism to speed up a range of image processing operations. Data parallelism found in array processors has been included into the architecture of the proposed processor. The implementation of commonly used image processing algorithms and their performance evaluation are also discussed. The performance of Snake is also compared with other types of processor architectures. (author)

Computational simulation in architectural and environmental acoustics methods and applications of wave-based computation

CERN Document Server

Sakamoto, Shinichi; Otsuru, Toru

2014-01-01

This book reviews a variety of methods for wave-based acoustic simulation and recent applications to architectural and environmental acoustic problems. Following an introduction providing an overview of computational simulation of sound environment, the book is in two parts: four chapters on methods and four chapters on applications. The first part explains the fundamentals and advanced techniques for three popular methods, namely, the finite-difference time-domain method, the finite element method, and the boundary element method, as well as alternative time-domain methods. The second part demonstrates various applications to room acoustics simulation, noise propagation simulation, acoustic property simulation for building components, and auralization. This book is a valuable reference that covers the state of the art in computational simulation for architectural and environmental acoustics.  

Cloud/Fog Computing System Architecture and Key Technologies for South-North Water Transfer Project Safety

Directory of Open Access Journals (Sweden)

Yaoling Fan

2018-01-01

Full Text Available In view of the real-time and distributed features of Internet of Things (IoT safety system in water conservancy engineering, this study proposed a new safety system architecture for water conservancy engineering based on cloud/fog computing and put forward a method of data reliability detection for the false alarm caused by false abnormal data from the bottom sensors. Designed for the South-North Water Transfer Project (SNWTP, the architecture integrated project safety, water quality safety, and human safety. Using IoT devices, fog computing layer was constructed between cloud server and safety detection devices in water conservancy projects. Technologies such as real-time sensing, intelligent processing, and information interconnection were developed. Therefore, accurate forecasting, accurate positioning, and efficient management were implemented as required by safety prevention of the SNWTP, and safety protection of water conservancy projects was effectively improved, and intelligential water conservancy engineering was developed.

Building Structure Design as an Integral Part of Architecture: A Teaching Model for Students of Architecture

Science.gov (United States)

Unay, Ali Ihsan; Ozmen, Cengiz

2006-01-01

This paper explores the place of structural design within undergraduate architectural education. The role and format of lecture-based structure courses within an education system, organized around the architectural design studio is discussed with its most prominent problems and proposed solutions. The fundamental concept of the current teaching…

Assessing the Impact of CAAD Design Tool on Architectural Design Education

Science.gov (United States)

Al-Matarneh, Rana; Fethi, Ihsan

2017-01-01

The current concept of architectural design education in most schools of architecture in Jordan is a blend between manual and digital approaches. However, the disconnection between these two methods has resulted in the students' failure to transfer skills learnt through traditional methods to the digital method of CAAD. The objective of this study…

The visual simulators for architecture and computer organization learning

OpenAIRE

Nikolić Boško; Grbanović Nenad; Đorđević Jovan

2009-01-01

The paper proposes a method of an effective distance learning of architecture and computer organization. The proposed method is based on a software system that is possible to be applied in any course in this field. Within this system students are enabled to observe simulation of already created computer systems. The system provides creation and simulation of switch systems, too.

Design Considerations. An Interior Architectural Design Approach to Interiors

Science.gov (United States)

Sawyer, William C.

1971-01-01

The State University Construction Fund, utilizing the nation's top professional talents, must design by contract, within fixed budgets and strict time schedules, quality architecture for 32 campuses in New York State. (Author)

Digital optical computers at the optoelectronic computing systems center

Science.gov (United States)

Jordan, Harry F.

1991-01-01

The Digital Optical Computing Program within the National Science Foundation Engineering Research Center for Opto-electronic Computing Systems has as its specific goal research on optical computing architectures suitable for use at the highest possible speeds. The program can be targeted toward exploiting the time domain because other programs in the Center are pursuing research on parallel optical systems, exploiting optical interconnection and optical devices and materials. Using a general purpose computing architecture as the focus, we are developing design techniques, tools and architecture for operation at the speed of light limit. Experimental work is being done with the somewhat low speed components currently available but with architectures which will scale up in speed as faster devices are developed. The design algorithms and tools developed for a general purpose, stored program computer are being applied to other systems such as optimally controlled optical communication networks.

Designing network on-chip architectures in the nanoscale era

CERN Document Server

Flich, Jose

2010-01-01

Going beyond isolated research ideas and design experiences, Designing Network On-Chip Architectures in the Nanoscale Era covers the foundations and design methods of network on-chip (NoC) technology. The contributors draw on their own lessons learned to provide strong practical guidance on various design issues.Exploring the design process of the network, the first part of the book focuses on basic aspects of switch architecture and design, topology selection, and routing implementation. In the second part, contributors discuss their experiences in the industry, offering a roadmap to recent p

Design and simulation of parallel and distributed architectures for images processing

International Nuclear Information System (INIS)

Pirson, Alain

1990-01-01

The exploitation of visual information requires special computers. The diversity of operations and the Computing power involved bring about structures founded on the concepts of concurrency and distributed processing. This work identifies a vision computer with an association of dedicated intelligent entities, exchanging messages according to the model of parallelism introduced by the language Occam. It puts forward an architecture of the 'enriched processor network' type. It consists of a classical multiprocessor structure where each node is provided with specific devices. These devices perform processing tasks as well as inter-nodes dialogues. Such an architecture benefits from the homogeneity of multiprocessor networks and the power of dedicated resources. Its implementation corresponds to that of a distributed structure, tasks being allocated to each Computing element. This approach culminates in an original architecture called ATILA. This modular structure is based on a transputer network supplied with vision dedicated co-processors and powerful communication devices. (author) [fr

Benchmarking high performance computing architectures with CMS’ skeleton framework

Science.gov (United States)

Sexton-Kennedy, E.; Gartung, P.; Jones, C. D.

2017-10-01

In 2012 CMS evaluated which underlying concurrency technology would be the best to use for its multi-threaded framework. The available technologies were evaluated on the high throughput computing systems dominating the resources in use at that time. A skeleton framework benchmarking suite that emulates the tasks performed within a CMSSW application was used to select Intel’s Thread Building Block library, based on the measured overheads in both memory and CPU on the different technologies benchmarked. In 2016 CMS will get access to high performance computing resources that use new many core architectures; machines such as Cori Phase 1&2, Theta, Mira. Because of this we have revived the 2012 benchmark to test it’s performance and conclusions on these new architectures. This talk will discuss the results of this exercise.

Nanotube devices based crossbar architecture: toward neuromorphic computing

International Nuclear Information System (INIS)

Zhao, W S; Gamrat, C; Agnus, G; Derycke, V; Filoramo, A; Bourgoin, J-P

2010-01-01

Nanoscale devices such as carbon nanotube and nanowires based transistors, memristors and molecular devices are expected to play an important role in the development of new computing architectures. While their size represents a decisive advantage in terms of integration density, it also raises the critical question of how to efficiently address large numbers of densely integrated nanodevices without the need for complex multi-layer interconnection topologies similar to those used in CMOS technology. Two-terminal programmable devices in crossbar geometry seem particularly attractive, but suffer from severe addressing difficulties due to cross-talk, which implies complex programming procedures. Three-terminal devices can be easily addressed individually, but with limited gain in terms of interconnect integration. We show how optically gated carbon nanotube devices enable efficient individual addressing when arranged in a crossbar geometry with shared gate electrodes. This topology is particularly well suited for parallel programming or learning in the context of neuromorphic computing architectures.

Safety Design Requirements for The Interior Architecture of Scientific Research Laboratories

International Nuclear Information System (INIS)

ElDib, A.A.

2014-01-01

The paper discusses one of the primary objectives of interior architecture design of research laboratories (specially those using radioactive materials) where it should provide a safe, accessible environment for laboratory personnel to conduct their work. A secondary objective is to allow for maximum flexibility for safe research. Therefore, health and safety hazards must be anticipated and carefully evaluated so that protective measures can be incorporated into the interior architectural design of these facilities wherever possible. The interior architecture requirements discussed in this paper illustrate some of the basic health and safety design features required for new and remodeled laboratories.The paper discusses one of the primary objectives of interior architecture design of research laboratories (specially those using radioactive materials) where it should provide a safe, accessible environment for laboratory personnel to conduct their work. A secondary objective is to allow for maximum flexibility for safe research. Therefore, health and safety hazards must be anticipated and carefully evaluated so that protective measures can be incorporated into the interior architectural design of these facilities wherever possible. The interior architecture requirements discussed in this paper illustrate some of the basic health and safety design features required for new and remodeled laboratories.

Cloud Computing in Support of Applied Learning: A Baseline Study of Infrastructure Design at Southern Polytechnic State University

Science.gov (United States)

Conn, Samuel S.; Reichgelt, Han

2013-01-01

Cloud computing represents an architecture and paradigm of computing designed to deliver infrastructure, platforms, and software as constructible computing resources on demand to networked users. As campuses are challenged to better accommodate academic needs for applications and computing environments, cloud computing can provide an accommodating…

Improving Software Performance in the Compute Unified Device Architecture

Directory of Open Access Journals (Sweden)

Alexandru PIRJAN

2010-01-01

Full Text Available This paper analyzes several aspects regarding the improvement of software performance for applications written in the Compute Unified Device Architecture CUDA. We address an issue of great importance when programming a CUDA application: the Graphics Processing Unit’s (GPU’s memory management through ranspose ernels. We also benchmark and evaluate the performance for progressively optimizing a transposing matrix application in CUDA. One particular interest was to research how well the optimization techniques, applied to software application written in CUDA, scale to the latest generation of general-purpose graphic processors units (GPGPU, like the Fermi architecture implemented in the GTX480 and the previous architecture implemented in GTX280. Lately, there has been a lot of interest in the literature for this type of optimization analysis, but none of the works so far (to our best knowledge tried to validate if the optimizations can apply to a GPU from the latest Fermi architecture and how well does the Fermi architecture scale to these software performance improving techniques.

FY1995 study of design methodology and environment of high-performance processor architectures; 1995 nendo koseino processor architecture sekkeiho to sekkei kankyo no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The aim of our project is to develop high-performance processor architectures for both general purpose and application-specific purpose. We also plan to develop basic softwares, such as compliers, and various design aid tools for those architectures. We are particularly interested in performance evaluation at architecture design phase, design optimization, automatic generation of compliers from processor designs, and architecture design methodologies combined with circuit layout. We have investigated both microprocessor architectures and design methodologies / environments for the processors. Our goal is to establish design technologies for high-performance, low-power, low-cost and highly-reliable systems in system-on-silicon era. We have proposed PPRAM architecture for high-performance system using DRAM and logic mixture technology, Softcore processor architecture for special purpose processors in embedded systems, and Power-Pro architecture for low power systems. We also developed design methodologies and design environments for the above architectures as well as a new method for design verification of microprocessors. (NEDO)

Development of integrated platform for computational material design

Energy Technology Data Exchange (ETDEWEB)

Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato [Center for Computational Science and Engineering, Fuji Research Institute Corporation (Japan); Hideaki, Koike [Advance Soft Corporation (Japan)

2003-07-01

The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned.

Development of integrated platform for computational material design

International Nuclear Information System (INIS)

Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato; Hideaki, Koike

2003-01-01

The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned

Security basics for computer architects

CERN Document Server

Lee, Ruby B

2013-01-01

Design for security is an essential aspect of the design of future computers. However, security is not well understood by the computer architecture community. Many important security aspects have evolved over the last several decades in the cryptography, operating systems, and networking communities. This book attempts to introduce the computer architecture student, researcher, or practitioner to the basic concepts of security and threat-based design. Past work in different security communities can inform our thinking and provide a rich set of technologies for building architectural support fo

Verifying Architectural Design Rules of the Flight Software Product Line

Science.gov (United States)

Ganesan, Dharmalingam; Lindvall, Mikael; Ackermann, Chris; McComas, David; Bartholomew, Maureen

2009-01-01

This paper presents experiences of verifying architectural design rules of the NASA Core Flight Software (CFS) product line implementation. The goal of the verification is to check whether the implementation is consistent with the CFS architectural rules derived from the developer's guide. The results indicate that consistency checking helps a) identifying architecturally significant deviations that were eluded during code reviews, b) clarifying the design rules to the team, and c) assessing the overall implementation quality. Furthermore, it helps connecting business goals to architectural principles, and to the implementation. This paper is the first step in the definition of a method for analyzing and evaluating product line implementations from an architecture-centric perspective.

Proposing Hybrid Architecture to Implement Cloud Computing in Higher Education Institutions Using a Meta-synthesis Appro

Directory of Open Access Journals (Sweden)

hamid reza bazi

2017-12-01

Full Text Available Cloud computing is a new technology that considerably helps Higher Education Institutions (HEIs to develop and create competitive advantage with inherent characteristics such as flexibility, scalability, accessibility, reliability, fault tolerant and economic efficiency. Due to the numerous advantages of cloud computing, and in order to take advantage of cloud computing infrastructure, services of universities and HEIs need to migrate to the cloud. However, this transition involves many challenges, one of which is lack or shortage of appropriate architecture for migration to the technology. Using a reliable architecture for migration ensures managers to mitigate risks in the cloud computing technology. Therefore, organizations always search for suitable cloud computing architecture. In previous studies, these important features have received less attention and have not been achieved in a comprehensive way. The aim of this study is to use a meta-synthesis method for the first time to analyze the previously published studies and to suggest appropriate hybrid cloud migration architecture (IUHEC. We reviewed many papers from relevant journals and conference proceedings. The concepts extracted from these papers are classified to related categories and sub-categories. Then, we developed our proposed hybrid architecture based on these concepts and categories. The proposed architecture was validated by a panel of experts and Lawshe’s model was used to determine the content validity. Due to its innovative yet user-friendly nature, comprehensiveness, and high security, this architecture can help HEIs have an effective migration to cloud computing environment.

Analog Integrated Circuit Design for Spike Time Dependent Encoder and Reservoir in Reservoir Computing Processors

Science.gov (United States)

2018-01-01

HAS BEEN REVIEWED AND IS APPROVED FOR PUBLICATION IN ACCORDANCE WITH ASSIGNED DISTRIBUTION STATEMENT. FOR THE CHIEF ENGINEER : / S / / S...bridged high-performance computing, nanotechnology , and integrated circuits & systems. 15. SUBJECT TERMS neuromorphic computing, neuron design, spike...multidisciplinary effort encompassed high-performance computing, nanotechnology , integrated circuits, and integrated systems. The project’s architecture was

Design studio as a life space in architectural education: privacy requirements

OpenAIRE

Demirbaş, Özgen Osman

1997-01-01

Ankara : The Department of Interior Architecture and Environmental Design and the Institute of Fine Arts of Bilkent Univ., 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical refences. There is a very important relationship between the educational outcomes and the architectural design of educational facilities. The most commonly used space in an architectural education is the design studio. Therefore, it is claimed that there should be a living process in a ...

Designing Material Materialising Design

DEFF Research Database (Denmark)

Nicholas, Paul

2013-01-01

Designing Material Materialising Design documents five projects developed at the Centre for Information Technology and Architecture (CITA) at the Royal Danish Academy of Fine Arts, School of Architecture. These projects explore the idea that new designed materials might require new design methods....... Focusing on fibre reinforced composites, this book sustains an exploration into the design and making of elastically tailored architectural structures that rely on the use of computational design to predict sensitive interdependencies between geometry and behaviour. Developing novel concepts...

Design and Analysis of Compact DNA Strand Displacement Circuits for Analog Computation Using Autocatalytic Amplifiers.

Science.gov (United States)

Song, Tianqi; Garg, Sudhanshu; Mokhtar, Reem; Bui, Hieu; Reif, John

2018-01-19

A main goal in DNA computing is to build DNA circuits to compute designated functions using a minimal number of DNA strands. Here, we propose a novel architecture to build compact DNA strand displacement circuits to compute a broad scope of functions in an analog fashion. A circuit by this architecture is composed of three autocatalytic amplifiers, and the amplifiers interact to perform computation. We show DNA circuits to compute functions sqrt(x), ln(x) and exp(x) for x in tunable ranges with simulation results. A key innovation in our architecture, inspired by Napier's use of logarithm transforms to compute square roots on a slide rule, is to make use of autocatalytic amplifiers to do logarithmic and exponential transforms in concentration and time. In particular, we convert from the input that is encoded by the initial concentration of the input DNA strand, to time, and then back again to the output encoded by the concentration of the output DNA strand at equilibrium. This combined use of strand-concentration and time encoding of computational values may have impact on other forms of molecular computation.

Architectural Drawing

DEFF Research Database (Denmark)

Steinø, Nicolai

2018-01-01

In a time of computer aided design, computer graphics and parametric design tools, the art of architectural drawing is in a state of neglect. But design and drawing are inseparably linked in ways which often go unnoticed. Essentially, it is very difficult, if not impossible, to conceive of a design...... is that computers can represent graphic ideas both faster and better than most medium-skilled draftsmen, drawing in design is not only about representing final designs. In fact, several steps involving the capacity to draw lie before the representation of a final design. Not only is drawing skills an important...... prerequisite for learning about the nature of existing objects and spaces, and thus to build a vocabulary of design. It is also a prerequisite for both reflecting and communicating about design ideas. In this paper, a taxonomy of notation, reflection, communication and presentation drawing is presented...

Software architecture design patterns in Java

CERN Document Server

Kuchana, Partha

2004-01-01

AN INTRODUCTION TO DESIGN PATTERNSDesign Patterns: Origin and HistoryArchitectural to Software Design PatternsWhat is a Design Pattern?More about Design PatternsAbout This BookUNIFIED MODELING LANGUAGE (UML)UML: A Quick ReferenceClass DiagramsSequence diagramsBASIC PATTERNSInterfaceDescriptionExamplePractice QuestionsAbstract Parent ClassDescriptionExamplePractice QuestionsPrivate MethodsDescriptionExamplePractice QuestionsAccessor MethodsDescriptionAccessor Method NomenclatureExampleDirect Reference versus Accessor MethodsPractice QuestionsConstant Data ManagerDescriptionExamplePractice Quest

Metaphor, Architectural Design, and Environmental Response

Directory of Open Access Journals (Sweden)

Brook Muller

2012-11-01

Full Text Available Value-laden articulations of the task of the architect guide manners of working - the concerns, inspirations and procedures given priority. Architectural practices in turn determine the nature of the physical constructs that result. If architects are contributing to environmental degradation by designing buildings that are inefficient and unhealthy, and a pressing need exists to advance more life enhancing, sustaining practices, then perhaps environmentally concerned architects ought not only work towards the creation of better performing, more resourceful building assemblies, but also to engage in basic reflection as to how design problems are expressed and the environmental receptivity such expressions reveal. By tracing the lineage binding utterance to practice to making, we might come to recognize that even subtle shifts in articulation can alter outcomes dramatically. Through such newfound awareness, we are open and encouraged to reexamine the architect’s role, to new descriptions of architecture, and to the possibility of deeper attunement and constructive engagement with our world. In their recent edited anthology on sustainable architectures, Simon Guy and Steven Moore suggest “while we might support and even encourage critical engagement with abstract theory about environmentalism, we are not interested in simply playing language games.” Although word play should not be the sole focus of our efforts, in a profession so reliant on effective communication, we should not underestimate the facility of language as constitutive of meaning. This paper explores metaphors as one potentially transformative means by which designers come to understand and describe the works they undertake. It examines the role of metaphors as agents of innovation, capable of heightening awareness of attributes often overlooked or undervalued, yet perhaps of critical significance given the particularities of a design problem seeking explication. This paper

Architectures for Green-Field Supply Chain Integration: Supply Chain Integration Design

OpenAIRE

Radanliev, Petar

2015-01-01

This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply\\ud chain integration architectures enable the conversion of individual into integrated strategies. The architect...

ANL/Star project: a new architecture for large scale theoretical physics computations

International Nuclear Information System (INIS)

Rushton, A.M.

1985-01-01

The project reported consists of two phases, each of which has goals of substantial physics content on its own. In Phase 1, we have selected Star Technologies' ST-100 as the array processor for the prototype coupled system and have installed one on a Vax 11/750 host. Our goals with this system are to institute a substantial program in computational physics at Argonne based on the power provided by this system and thereby to gain experience with both the hardware and software architecture of the ST-100. In Phase II, we propose to build a prototype consisting of two coupled array processors with shared memory to prove that this design can achieve high speed and efficiency in a readily extensible and cost-effective manner. This will implement all of the hardware and software modifications necessary to extend this design to as many as 64 (or more) nodes. In our design, we seek to minimize the changes made in the standard system hardware and software; this drastically reduces the effort required by our group to implement such a design and enables us to more readily incorporate the companies' upgrades to the array processor. It should be emphasized that our design is intended as a special purpose system for theoretical calculations; however it can be efficiently applied to a surprisingly broad class of problems. I shall discuss first the architecture of the ST-100 and then the physics program being currently implemented on a single system. Finally the proposed design of the coupled system is presented

ANL/Star project: a new architecture for large scale theoretical physics computations

Energy Technology Data Exchange (ETDEWEB)

Rushton, A.M.

1985-01-01

The project reported consists of two phases, each of which has goals of substantial physics content on its own. In Phase 1, we have selected Star Technologies' ST-100 as the array processor for the prototype coupled system and have installed one on a Vax 11/750 host. Our goals with this system are to institute a substantial program in computational physics at Argonne based on the power provided by this system and thereby to gain experience with both the hardware and software architecture of the ST-100. In Phase II, we propose to build a prototype consisting of two coupled array processors with shared memory to prove that this design can achieve high speed and efficiency in a readily extensible and cost-effective manner. This will implement all of the hardware and software modifications necessary to extend this design to as many as 64 (or more) nodes. In our design, we seek to minimize the changes made in the standard system hardware and software; this drastically reduces the effort required by our group to implement such a design and enables us to more readily incorporate the companies' upgrades to the array processor. It should be emphasized that our design is intended as a special purpose system for theoretical calculations; however it can be efficiently applied to a surprisingly broad class of problems. I shall discuss first the architecture of the ST-100 and then the physics program being currently implemented on a single system. Finally the proposed design of the coupled system is presented.

Design of a Load-Balancing Architecture For Parallel Firewalls

National Research Council Canada - National Science Library

Joyner, William

1999-01-01

.... This thesis proposes a load-balancing firewall architecture to meet the Navy's needs. It first conducts an architectural analysis of the problem and then presents a high-level system design as a solution...

Architecture of Gothic Period and Its Effect to Clothing Design

Directory of Open Access Journals (Sweden)

Şerife YILDIZ

2015-08-01

Full Text Available Root of the word Gothic comes from a German tribe which lives in region of the Gotland of Scandinavia. Gothic period is a movement which ends the Midde Age and opens Renaissance. Alth ough seen in all branches of the art, Gothic is widely a style of architecture. Having been originated from the Roman architecture, Gothic Architecture come out in the second half of the 12th century and continued its existence until the half of the 16th c entury when classical architecture come out. In Europe, Gothic painting, sculpture and architecture were dominant and preserved its popularity until the Renaissance. Fashion means all the temporary new styles which come out in a certain period of time with the desires of dressing up, being different, wearing the most desirable. Although seen as two different design field, when we examine closely, we can see that fashion and architecture has many common point from the past to present. As man is the common po int of this two field, they naturally affect each other. Gothic architecture inspired clothing designs, which is enough to show how much they affected each other. In this study, our purpose is to reveal effects of the Gothic architecture on the clothing d esigns. The style used in the Gothic period architecture and models and styles in clothing designs was presented with the help of table of specification. According to this, both fields' sharing common aesthetic concern and same theoritic and ideologic bas e was accompanied by stylistic and structural similarities accordingly. Designers in this two different fields turned even to themselves for inspiration and technical strategy. Environmental and cultural factors affect both fashion designers and architects . When seen as a part of historical process, clothes and buildings with their important cultural and economic conditions are priceless anthropological buildings which show technological developments within the period.

SaaS architecture and pricing models

OpenAIRE

Laatikainen, Gabriella; Ojala, Arto

2014-01-01

In the new era of computing, SaaS software with different architectural characteristics might be priced in different ways. Even though both pricing and architectural characteristics are responsible for the success of the offering; the relationship between architectural and pricing characteristics has not been studied before. The present study fills this gap by employing a multi-case research. The findings accentuate that flexible and well-designed architecture enables different pricing models...

RISC. A new style in the design of architectures

International Nuclear Information System (INIS)

Cortadella, J.; Gonzalez, A.; Llaberia, J.M.

1988-01-01

In the 80's a new architecture design and implementation style has appeared: the RISC style. It proposes an overall view of the system were the processor is included. For each function, an extensive analysis has to be performed in order to evaluate the advantages and disadvantages that hardware and software introduce in the design. An optimum design involved an agreement between both levels and has to take into account cost, performance, and technological factors. In this paper, the main features of this new architecture design style are presented. (Author)

Formal computer-aided product family architecture design for mass customization

DEFF Research Database (Denmark)

Bonev, Martin; Hvam, Lars; Clarkson, John

2015-01-01

With product customization companies aim at creating higher customer value and stronger economic benefits. The profitability of the offered variety relies on the quality of the developed product family architectures and their consistent implementation in configuration systems. Yet existing method...

Collaborative Working Architecture for IoT-Based Applications.

Science.gov (United States)

Mora, Higinio; Signes-Pont, María Teresa; Gil, David; Johnsson, Magnus

2018-05-23

The new sensing applications need enhanced computing capabilities to handle the requirements of complex and huge data processing. The Internet of Things (IoT) concept brings processing and communication features to devices. In addition, the Cloud Computing paradigm provides resources and infrastructures for performing the computations and outsourcing the work from the IoT devices. This scenario opens new opportunities for designing advanced IoT-based applications, however, there is still much research to be done to properly gear all the systems for working together. This work proposes a collaborative model and an architecture to take advantage of the available computing resources. The resulting architecture involves a novel network design with different levels which combines sensing and processing capabilities based on the Mobile Cloud Computing (MCC) paradigm. An experiment is included to demonstrate that this approach can be used in diverse real applications. The results show the flexibility of the architecture to perform complex computational tasks of advanced applications.

The Square Kilometre Array Science Data Processor. Preliminary compute platform design

International Nuclear Information System (INIS)

Broekema, P.C.; Nieuwpoort, R.V. van; Bal, H.E.

2015-01-01

The Square Kilometre Array is a next-generation radio-telescope, to be built in South Africa and Western Australia. It is currently in its detailed design phase, with procurement and construction scheduled to start in 2017. The SKA Science Data Processor is the high-performance computing element of the instrument, responsible for producing science-ready data. This is a major IT project, with the Science Data Processor expected to challenge the computing state-of-the art even in 2020. In this paper we introduce the preliminary Science Data Processor design and the principles that guide the design process, as well as the constraints to the design. We introduce a highly scalable and flexible system architecture capable of handling the SDP workload

Design health village with the approach of sustainable architecture ...

African Journals Online (AJOL)

Journal Home > Vol 8, No 3 (2016) > ... a natural environment and away from the pollution of urban life , traditional medical care, hydrotherapy, sports and ... Keywords: Health; city health; smart; sustainability in architecture; architectural design ...

VLSI Architecture and Design

OpenAIRE

Johnsson, Lennart

1980-01-01

Integrated circuit technology is rapidly approaching a state where feature sizes of one micron or less are tractable. Chip sizes are increasing slowly. These two developments result in considerably increased complexity in chip design. The physical characteristics of integrated circuit technology are also changing. The cost of communication will be dominating making new architectures and algorithms both feasible and desirable. A large number of processors on a single chip will be possible....

Exploring Hardware-Based Primitives to Enhance Parallel Security Monitoring in a Novel Computing Architecture

National Research Council Canada - National Science Library

Mott, Stephen

2007-01-01

.... In doing this, we propose a novel computing architecture, derived from a contemporary shared memory architecture, that facilitates efficient security-related monitoring in real-time, while keeping...

New concept of aging care architecture landscape design based on sustainable development

Science.gov (United States)

Xu, Ying

2017-05-01

As the aging problem becoming serious in China, Aging care is now one of the top issuer in front of all of us. Lots of private and public aging care architecture and facilities have been built. At present, we only pay attention to the architecture design and interior design scientific, ecological and sustainable design on aged care architecture landscape. Based on the social economy, population resources, mutual coordination and development of the environment, taking the elderly as the special group, this paper follows the principles of the sustainable development, conducts the comprehensive design planning of aged care landscape architecture and makes a deeper understanding and exploration through changing the form of architectural space, ecological landscape planting, new materials and technology, ecological energy utilization.

ARCHITECTURAL FORM CREATION IN THE DESIGN STUDIO: PHYSICAL MODELING AS AN EFFECTIVE DESIGN TOOL

Directory of Open Access Journals (Sweden)

Wael Abdelhameed

2011-11-01

Full Text Available This research paper attempts to shed more light on an area of the design studio, which concerns with the use of physical modeling as a design medium in architectural form creation. An experiment has been carried out during an architectural design studio in order to not only investigate physical modeling as a tool of form creation but also improve visual design thinking that students employ while using this manual tool. To achieve the research objective, a method was proposed and applied to track form creation processes, based upon three types of operation, namely: sketching transformations, divergent physical-modeling transformations, and convergent physical-modeling transformations. The method helps record the innovative transitions of form during conceptual designing in a simple way. Investigating form creation processes and activities associated with visual design thinking enables the research to conclude to general results of the role of physical modeling in the conceptual phase of designing, and to specific results of the methods used in this architectural design studio experiment.

Building configuration and seismic design: The architecture of earthquake resistance

Science.gov (United States)

Arnold, C.; Reitherman, R.; Whitaker, D.

1981-05-01

The architecture of a building in relation to its ability to withstand earthquakes was determined. Aspects of round motion which are significant to building behavior are discussed. Results of a survey of configuration decisions that affect the performance of buildings with a focus on the architectural aspects of configuration design are provided. Configuration derivation, building type as it relates to seismic design, and seismic design, and seismic issues in the design process are examined. Case studies of the Veterans' Administration Hospital in Loma Linda, California, and the Imperial Hotel in Tokyo, Japan, are presented. The seismic design process is described paying special attention to the configuration issues. The need is stressed for guidelines, codes, and regulations to ensure design solutions that respect and balance the full range of architectural, engineering, and material influences on seismic hazards.

Using Multimedia for Teaching Analysis in History of Modern Architecture.

Science.gov (United States)

Perryman, Garry

This paper presents a case for the development and support of a computer-based interactive multimedia program for teaching analysis in community college architecture design programs. Analysis in architecture design is an extremely important strategy for the teaching of higher-order thinking skills, which senior schools of architecture look for in…

Scalable quantum computer architecture with coupled donor-quantum dot qubits

Science.gov (United States)

Schenkel, Thomas; Lo, Cheuk Chi; Weis, Christoph; Lyon, Stephen; Tyryshkin, Alexei; Bokor, Jeffrey

2014-08-26

A quantum bit computing architecture includes a plurality of single spin memory donor atoms embedded in a semiconductor layer, a plurality of quantum dots arranged with the semiconductor layer and aligned with the donor atoms, wherein a first voltage applied across at least one pair of the aligned quantum dot and donor atom controls a donor-quantum dot coupling. A method of performing quantum computing in a scalable architecture quantum computing apparatus includes arranging a pattern of single spin memory donor atoms in a semiconductor layer, forming a plurality of quantum dots arranged with the semiconductor layer and aligned with the donor atoms, applying a first voltage across at least one aligned pair of a quantum dot and donor atom to control a donor-quantum dot coupling, and applying a second voltage between one or more quantum dots to control a Heisenberg exchange J coupling between quantum dots and to cause transport of a single spin polarized electron between quantum dots.

A Process Framework for Designing Software Reference Architectures for Providing Tools as a Service

DEFF Research Database (Denmark)

Chauhan, Muhammad Aufeef; Babar, Muhammad Ali; Probst, Christian W.

2016-01-01

of software systems need customized and systematic SRA design and evaluation methods. In this paper, we present a software Reference Architecture Design process Framework (RADeF) that can be used for analysis, design and evaluation of the SRA for provisioning of Tools as a Service as part of a cloud......Software Reference Architecture (SRA), which is a generic architecture solution for a specific type of software systems, provides foundation for the design of concrete architectures in terms of architecture design guidelines and architecture elements. The complexity and size of certain types......-enabled workSPACE (TSPACE). The framework is based on the state of the art results from literature and our experiences with designing software architectures for cloud-based systems. We have applied RADeF SRA design two types of TSPACE: software architecting TSPACE and software implementation TSPACE...

Modeling, analysis and optimization of network-on-chip communication architectures

CERN Document Server

Ogras, Umit Y

2013-01-01

Traditionally, design space exploration for Systems-on-Chip (SoCs) has focused on the computational aspects of the problem at hand. However, as the number of components on a single chip and their performance continue to increase, the communication architecture plays a major role in the area, performance and energy consumption of the overall system. As a result, a shift from computation-based to communication-based design becomes mandatory. Towards this end, network-on-chip (NoC) communication architectures have emerged recently as a promising alternative to classical bus and point-to-point communication architectures. This book explores outstanding research problems related to modeling, analysis and optimization of NoC communication architectures. More precisely, we present novel design methodologies, software tools and FPGA prototypes to aid the design of application-specific NoCs.

Investigation of Architectural Strategies in Relation to Daylight and Integrated Design

DEFF Research Database (Denmark)

Jørgensen, Michael; Iversen, Anne; Bjerregaard Jensen, Lotte

2012-01-01

his paper investigates the use of daylight in three architecturally successful buildings. The aim is to discuss the challenges and opportunities of architectural daylight strategies in relation to integrated design. All these buildings were designed with the focus on a strategy of using daylight...... to create well-lit, exciting spaces and spatial sequences. The original ideas, thoughts, and decisions behind the designs and daylight strategy are compared with answers in questionnaires from test subjects who have experienced the space and lighting conditions created. The results indicate...... that the architectural daylight strategies formulated by the architects and engineers at the beginning of the design process are actually experienced by the “users” in the existing buildings. The architectural daylight strategy was different in each of the three libraries, and analysis of the results shows that daylight...

A modular architecture for transparent computation in recurrent neural networks.

Science.gov (United States)

Carmantini, Giovanni S; Beim Graben, Peter; Desroches, Mathieu; Rodrigues, Serafim

2017-01-01

Computation is classically studied in terms of automata, formal languages and algorithms; yet, the relation between neural dynamics and symbolic representations and operations is still unclear in traditional eliminative connectionism. Therefore, we suggest a unique perspective on this central issue, to which we would like to refer as transparent connectionism, by proposing accounts of how symbolic computation can be implemented in neural substrates. In this study we first introduce a new model of dynamics on a symbolic space, the versatile shift, showing that it supports the real-time simulation of a range of automata. We then show that the Gödelization of versatile shifts defines nonlinear dynamical automata, dynamical systems evolving on a vectorial space. Finally, we present a mapping between nonlinear dynamical automata and recurrent artificial neural networks. The mapping defines an architecture characterized by its granular modularity, where data, symbolic operations and their control are not only distinguishable in activation space, but also spatially localizable in the network itself, while maintaining a distributed encoding of symbolic representations. The resulting networks simulate automata in real-time and are programmed directly, in the absence of network training. To discuss the unique characteristics of the architecture and their consequences, we present two examples: (i) the design of a Central Pattern Generator from a finite-state locomotive controller, and (ii) the creation of a network simulating a system of interactive automata that supports the parsing of garden-path sentences as investigated in psycholinguistics experiments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Students’ Attitudes to Universal Design in Architecture Education

Directory of Open Access Journals (Sweden)

Helen Larkin

2016-12-01

Full Text Available It is widely recognised that the built environment can dramatically impact the participation and engagement of people with disability and diverse needs. It has therefore become necessary for architects and designers to consider these needs when working within their profession. The implementation of universal design teaching into architecture and design curriculum has been recognised as an important step in facilitating and enhancing the uptake of universal design during the design process. Using a quantitative approach, this study aimed to compare, contrast and explore the attitudes of two groups of architecture students to the universal design of built environments. One group had received education relating to diversity and universal design as part of a prior project while the other group had not received this content. Findings from this comparison demonstrated that overall, no significant differences between groups existed. However further investigation provided interesting insight and perspectives into student attitudes to universal design and potential influencers of these attitudes.

Distributed embedded smart cameras architectures, design and applications

CERN Document Server

Velipasalar, Senem

2014-01-01

This publication addresses distributed embedded smart cameras –cameras that perform onboard analysis and collaborate with other cameras. This book provides the material required to better understand the architectural design challenges of embedded smart camera systems, the hardware/software ecosystem, the design approach for, and applications of distributed smart cameras together with the state-of-the-art algorithms. The authors concentrate on the architecture, hardware/software design, realization of smart camera networks from applications to architectures, in particular in the embedded and mobile domains. •                    Examines energy issues related to wireless communication such as decreasing energy consumption to increase battery-life •                    Discusses processing large volumes of video data on an embedded environment in real-time •                    Covers design of realistic applications of distributed and embedded smart...

ELISA, a demonstrator environment for information systems architecture design

Science.gov (United States)

Panem, Chantal

1994-01-01

This paper describes an approach of reusability of software engineering technology in the area of ground space system design. System engineers have lots of needs similar to software developers: sharing of a common data base, capitalization of knowledge, definition of a common design process, communication between different technical domains. Moreover system designers need to simulate dynamically their system as early as possible. Software development environments, methods and tools now become operational and widely used. Their architecture is based on a unique object base, a set of common management services and they host a family of tools for each life cycle activity. In late '92, CNES decided to develop a demonstrative software environment supporting some system activities. The design of ground space data processing systems was chosen as the application domain. ELISA (Integrated Software Environment for Architectures Specification) was specified as a 'demonstrator', i.e. a sufficient basis for demonstrations, evaluation and future operational enhancements. A process with three phases was implemented: system requirements definition, design of system architectures models, and selection of physical architectures. Each phase is composed of several activities that can be performed in parallel, with the provision of Commercial Off the Shelves Tools. ELISA has been delivered to CNES in January 94, currently used for demonstrations and evaluations on real projects (e.g. SPOT4 Satellite Control Center). It is on the way of new evolutions.

A Parallel Implementation of a Smoothed Particle Hydrodynamics Method on Graphics Hardware Using the Compute Unified Device Architecture

International Nuclear Information System (INIS)

Wong Unhong; Wong Honcheng; Tang Zesheng

2010-01-01

The smoothed particle hydrodynamics (SPH), which is a class of meshfree particle methods (MPMs), has a wide range of applications from micro-scale to macro-scale as well as from discrete systems to continuum systems. Graphics hardware, originally designed for computer graphics, now provide unprecedented computational power for scientific computation. Particle system needs a huge amount of computations in physical simulation. In this paper, an efficient parallel implementation of a SPH method on graphics hardware using the Compute Unified Device Architecture is developed for fluid simulation. Comparing to the corresponding CPU implementation, our experimental results show that the new approach allows significant speedups of fluid simulation through handling huge amount of computations in parallel on graphics hardware.

A Topology Optimisation Approach to Learning in Architectural Design

DEFF Research Database (Denmark)

Mullins, Michael; Kirkegaard, Poul Henning; Jessen, Rasmus Zederkof

2005-01-01

describes an attempt to unify analytic and analogical approaches in an architectural education setting, using topology optimization software. It uses as examples recent student projects where the architectural design process based on a topology optimization approach has been investigated. The paper...

Performance Aided Design

DEFF Research Database (Denmark)

Parigi, Dario

2014-01-01

paradigm where the increasing integration of parametric tools and performative analysis is changing the way we learn and design. The term Performance Aided Architectural Design (PAD) is proposed at the Master of Science of Architecture and Design at Aalborg University, with the aim of extending a tectonic...... tradition of architecture with computational tools, preparing the basis for the creation of the figure of a modern master builder, sitting at the boundary of the disciplines of architecture and engineering. Performance Aided Design focuses on the role of performative analysis, embedded tectonics......, and computational methods tools to trigger creativity and innovative understanding of relation between form material and a increasingly wide range of performances in architectural design. The ultimate goal is to pursue a design approach that aims at embracing rather than excluding the complexity implicit...

PHENIX On-Line Distributed Computing System Architecture

International Nuclear Information System (INIS)

Desmond, Edmond; Haggerty, John; Kehayias, Hyon Joo; Purschke, Martin L.; Witzig, Chris; Kozlowski, Thomas

1997-01-01

PHENIX is one of the two large experiments at the Relativistic Heavy Ion Collider (RHIC) currently under construction at Brookhaven National Laboratory. The detector consists of 11 sub-detectors, that are further subdivided into 29 units (''granules'') that can be operated independently, which includes simultaneous data taking with independent data streams and independent triggers. The detector has 250,000 channels and is read out by front end modules, where the data is buffered in a pipeline while awaiting the level trigger decision. Zero suppression and calibration is done after the level accept in custom built data collection modules (DCMs) with DSPs before the data is sent to an event builder (design throughput of 2 Gb/sec) and higher level triggers. The On-line Computing Systems Group (ONCS) has two responsibilities. Firstly it is responsible for receiving the data from the event builder, routing it through a network of workstations to consumer processes and archiving it at a data rate of 20 MB/sec. Secondly it is also responsible for the overall configuration, control and operation of the detector and data acquisition chain, which comprises the software integration for several thousand custom built hardware modules. The software must furthermore support the independent operation of the above mentioned granules, which includes the coordination of processes that run in 60-100 VME processors and workstations. ONOS has adapted the Shlaer- Mellor Object Oriented Methodology for the design of the top layer software. CORBA is used as communication layer between the distributed objects, which are implemented as asynchronous finite state machines. We will give an overview of the PHENIX online system with the main focus on the system architecture, software components and integration tasks of the On-line Computing group ONCS and report on the status of the current prototypes

Search for design intelligence: A field study on the role of emotional intelligence in architectural design studios

OpenAIRE

Nazidizaji, Sajjad; Tomé, Ana; Regateiro, Francisco

2017-01-01

The design studio is the core of the architecture curriculum. Interpersonal interactions have a key role during the processes of design and critique. The influence of emotional intelligence (EQ) on interpersonal communication skills has been widely proven. This study examines the correlation between EQ and architectural design competence. To achieve this, 78 architecture students were selected via a simple random sampling method and tested using an EQ test questionnaire developed by Bradbury ...

The Use of Facade Mockups in in LCA Based Architectural Design

DEFF Research Database (Denmark)

Naboni, Emanuele

2017-01-01

Life Cycle Assessment is increasingly becoming important in façade architectural design. The presented research aims to describe an LCA architectural design approach based on the use of a Façade Mockup. The approach is applied and tested for the design Telecom Sustainable Campus’ façade, in Rome...

Quantum perceptron over a field and neural network architecture selection in a quantum computer.

Science.gov (United States)

da Silva, Adenilton José; Ludermir, Teresa Bernarda; de Oliveira, Wilson Rosa

2016-04-01

In this work, we propose a quantum neural network named quantum perceptron over a field (QPF). Quantum computers are not yet a reality and the models and algorithms proposed in this work cannot be simulated in actual (or classical) computers. QPF is a direct generalization of a classical perceptron and solves some drawbacks found in previous models of quantum perceptrons. We also present a learning algorithm named Superposition based Architecture Learning algorithm (SAL) that optimizes the neural network weights and architectures. SAL searches for the best architecture in a finite set of neural network architectures with linear time over the number of patterns in the training set. SAL is the first learning algorithm to determine neural network architectures in polynomial time. This speedup is obtained by the use of quantum parallelism and a non-linear quantum operator. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hybrid VLSI/QCA Architecture for Computing FFTs

Science.gov (United States)

Fijany, Amir; Toomarian, Nikzad; Modarres, Katayoon; Spotnitz, Matthew

2003-01-01

A data-processor architecture that would incorporate elements of both conventional very-large-scale integrated (VLSI) circuitry and quantum-dot cellular automata (QCA) has been proposed to enable the highly parallel and systolic computation of fast Fourier transforms (FFTs). The proposed circuit would complement the QCA-based circuits described in several prior NASA Tech Briefs articles, namely Implementing Permutation Matrices by Use of Quantum Dots (NPO-20801), Vol. 25, No. 10 (October 2001), page 42; Compact Interconnection Networks Based on Quantum Dots (NPO-20855) Vol. 27, No. 1 (January 2003), page 32; and Bit-Serial Adder Based on Quantum Dots (NPO-20869), Vol. 27, No. 1 (January 2003), page 35. The cited prior articles described the limitations of very-large-scale integrated (VLSI) circuitry and the major potential advantage afforded by QCA. To recapitulate: In a VLSI circuit, signal paths that are required not to interact with each other must not cross in the same plane. In contrast, for reasons too complex to describe in the limited space available for this article, suitably designed and operated QCAbased signal paths that are required not to interact with each other can nevertheless be allowed to cross each other in the same plane without adverse effect. In principle, this characteristic could be exploited to design compact, coplanar, simple (relative to VLSI) QCA-based networks to implement complex, advanced interconnection schemes.

Patterns of Growth—Biomimetics and Architectural Design

Directory of Open Access Journals (Sweden)

Petra Gruber

2017-04-01

Full Text Available This paper discusses the approach of biomimetic design in architecture applied to the theme of growth in biology by taking two exemplary research projects at the intersection of arts and sciences. The first project, ‘Biornametics’, dealt with patterns from nature; the second project ‘Growing as Building (GrAB’ took on biological growth as a specific theme for the transfer to architecture and the arts. Within a timeframe of five years (2011–2015, the research was conducted under the Program for Arts-based Research PEEK (Programm zur Entwicklung und Erschliessung der Künste of the Austrian Science Fund FWF (Fonds zur Förderung der wissenschaftlichen Forschung. The underlying hypothesis was that growth processes in nature have not been studied for transfer into technology and architecture yet and that, with advanced software tools, promising applications could be found. To ensure a high degree of innovation, this research was done with an interdisciplinary team of architects, engineers, and scientists (mainly biologists to lay the groundwork for future product-oriented technological solutions. Growth, as one of the important characteristics of living organisms, is used as a frame for research into systems and principles that shall deliver innovative and sustainable solutions in architecture and the arts. Biomimetics as a methodology was used to create and guide information transfer from the life sciences to innovative proto-architectural solutions. The research aimed at transferring qualities present in biological growth; for example, adaptiveness, exploration, or local resource harvesting into technical design and production processes. In contrast to our current building construction, implementing principles of growth could potentially transform building towards a more integrated and sustainable setting, a new living architecture. Tools and methods, especially Quality Function Deployment (QFD for matching biological role models with

Heterogeneous reconfigurable processors for real-time baseband processing from algorithm to architecture

CERN Document Server

Zhang, Chenxin; Öwall, Viktor

2016-01-01

This book focuses on domain-specific heterogeneous reconfigurable architectures, demonstrating for readers a computing platform which is flexible enough to support multiple standards, multiple modes, and multiple algorithms. The content is multi-disciplinary, covering areas of wireless communication, computing architecture, and circuit design. The platform described provides real-time processing capability with reasonable implementation cost, achieving balanced trade-offs among flexibility, performance, and hardware costs. The authors discuss efficient design methods for wireless communication processing platforms, from both an algorithm and architecture design perspective. Coverage also includes computing platforms for different wireless technologies and standards, including MIMO, OFDM, Massive MIMO, DVB, WLAN, LTE/LTE-A, and 5G. •Discusses reconfigurable architectures, including hardware building blocks such as processing elements, memory sub-systems, Network-on-Chip (NoC), and dynamic hardware reconfigur...

A spatially augmented reality sketching interface for architectural daylighting design.

Science.gov (United States)

Sheng, Yu; Yapo, Theodore C; Young, Christopher; Cutler, Barbara

2011-01-01

We present an application of interactive global illumination and spatially augmented reality to architectural daylight modeling that allows designers to explore alternative designs and new technologies for improving the sustainability of their buildings. Images of a model in the real world, captured by a camera above the scene, are processed to construct a virtual 3D model. To achieve interactive rendering rates, we use a hybrid rendering technique, leveraging radiosity to simulate the interreflectance between diffuse patches and shadow volumes to generate per-pixel direct illumination. The rendered images are then projected on the real model by four calibrated projectors to help users study the daylighting illumination. The virtual heliodon is a physical design environment in which multiple designers, a designer and a client, or a teacher and students can gather to experience animated visualizations of the natural illumination within a proposed design by controlling the time of day, season, and climate. Furthermore, participants may interactively redesign the geometry and materials of the space by manipulating physical design elements and see the updated lighting simulation. © 2011 IEEE Published by the IEEE Computer Society

Neuromorphic Computing, Architectures, Models, and Applications. A Beyond-CMOS Approach to Future Computing, June 29-July 1, 2016, Oak Ridge, TN

Energy Technology Data Exchange (ETDEWEB)

Potok, Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Schuman, Catherine [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Patton, Robert [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hylton, Todd [Brain Corporation, San Diego, CA (United States); Li, Hai [Univ. of Pittsburgh, PA (United States); Pino, Robinson [US Dept. of Energy, Washington, DC (United States)

2016-12-31

The White House and Department of Energy have been instrumental in driving the development of a neuromorphic computing program to help the United States continue its lead in basic research into (1) Beyond Exascale—high performance computing beyond Moore’s Law and von Neumann architectures, (2) Scientific Discovery—new paradigms for understanding increasingly large and complex scientific data, and (3) Emerging Architectures—assessing the potential of neuromorphic and quantum architectures. Neuromorphic computing spans a broad range of scientific disciplines from materials science to devices, to computer science, to neuroscience, all of which are required to solve the neuromorphic computing grand challenge. In our workshop we focus on the computer science aspects, specifically from a neuromorphic device through an application. Neuromorphic devices present a very different paradigm to the computer science community from traditional von Neumann architectures, which raises six major questions about building a neuromorphic application from the device level. We used these fundamental questions to organize the workshop program and to direct the workshop panels and discussions. From the white papers, presentations, panels, and discussions, there emerged several recommendations on how to proceed.

Network Analysis, Architecture, and Design