WorldWideScience

Sample records for computer aided education

  1. Computer-aided voice training in higher education: participants ...

    African Journals Online (AJOL)

    ... multi cultural educational context presents unique problems and requires inventive teaching strategies. Computer-aided training offers objective visual feedback of the voice production that can be implemented as a teaching aid in higher education. This article reports on the subjective programme evaluation by a teacher ...

  2. The computer aided education and training system for accident management

    International Nuclear Information System (INIS)

    Yoneyama, Mitsuru; Kubota, Ryuji; Fujiwara, Tadashi; Sakuma, Hitoshi

    1999-01-01

    The education and training system for Accident Management was developed by the Japanese BWR group and Hitachi Ltd. The education and training system is composed of two systems. One is computer aided instruction (CAI) education system and the education and training system with computer simulations. Both systems are designed to be executed on personal computers. The outlines of the CAI education system and the education and training system with simulator are reported below. These systems provides plant operators and technical support center staff with the effective education and training for accident management. (author)

  3. Educational aids

    International Nuclear Information System (INIS)

    Lenkeit, S.

    1989-01-01

    Educational aids include printed matter, aural media, visual media, audiovisual media and objects. A distinction is made between learning aids, which include blackboards, overhead projectors, flipcharts, wallcharts and pinboards, and learning aids, which include textbooks, worksheets, documentation and experimental equipment. The various aids are described and their use explained. The aids available at the School for Nuclear Technology of the Karlsruhe Nuclear Research Centre are described

  4. Computer Instructional Aids for Undergraduate Control Education. 1978 Edition.

    Science.gov (United States)

    Volz, Richard A.; And Others

    This work represents the development of computer tools for undergraduate students. Emphasis is on automatic control theory using hybrid and digital computation. The routine calculations of control system analysis are presented as students would use them on the University of Michigan's central digital computer and the time-shared graphic terminals…

  5. Towards Building a Computer Aided Education System for Special Students Using Wearable Sensor Technologies

    Directory of Open Access Journals (Sweden)

    Raja Majid Mehmood

    2017-02-01

    Full Text Available Human computer interaction is a growing field in terms of helping people in their daily life to improve their living. Especially, people with some disability may need an interface which is more appropriate and compatible with their needs. Our research is focused on similar kinds of problems, such as students with some mental disorder or mood disruption problems. To improve their learning process, an intelligent emotion recognition system is essential which has an ability to recognize the current emotional state of the brain. Nowadays, in special schools, instructors are commonly use some conventional methods for managing special students for educational purposes. In this paper, we proposed a novel computer aided method for instructors at special schools where they can teach special students with the support of our system using wearable technologies.

  6. Towards Building a Computer Aided Education System for Special Students Using Wearable Sensor Technologies.

    Science.gov (United States)

    Mehmood, Raja Majid; Lee, Hyo Jong

    2017-02-08

    Human computer interaction is a growing field in terms of helping people in their daily life to improve their living. Especially, people with some disability may need an interface which is more appropriate and compatible with their needs. Our research is focused on similar kinds of problems, such as students with some mental disorder or mood disruption problems. To improve their learning process, an intelligent emotion recognition system is essential which has an ability to recognize the current emotional state of the brain. Nowadays, in special schools, instructors are commonly use some conventional methods for managing special students for educational purposes. In this paper, we proposed a novel computer aided method for instructors at special schools where they can teach special students with the support of our system using wearable technologies.

  7. A Study of the Use of Ontologies for Building Computer-Aided Control Engineering Self-Learning Educational Software

    Science.gov (United States)

    García, Isaías; Benavides, Carmen; Alaiz, Héctor; Alonso, Angel

    2013-01-01

    This paper describes research on the use of knowledge models (ontologies) for building computer-aided educational software in the field of control engineering. Ontologies are able to represent in the computer a very rich conceptual model of a given domain. This model can be used later for a number of purposes in different software applications. In…

  8. The ribbon microphone - an educational aid: use of a ribbon microphone to teach multi-discipline computer simulation skills

    CSIR Research Space (South Africa)

    Van Wyk, Marius

    2016-07-01

    Full Text Available on Advances in Computational Tools for Engineering Applications (ACTEA), 13-15 July 2016, Libanon The ribbon microphone — An educational aid: Use of a ribbon microphone to teach multi-discipline computer simulation skills Marius van Wyk ; Petrie Meyer...

  9. Computer aided product design

    DEFF Research Database (Denmark)

    Constantinou, Leonidas; Bagherpour, Khosrow; Gani, Rafiqul

    1996-01-01

    A general methodology for Computer Aided Product Design (CAPD) with specified property constraints which is capable of solving a large range of problems is presented. The methodology employs the group contribution approach, generates acyclic, cyclic and aromatic compounds of various degrees......-liquid equilibria (LLE), solid-liquid equilibria (SLE) and gas solubility. Finally, a computer program based on the extended methodology has been developed and the results from five case studies highlighting various features of the methodology are presented....

  10. Computer aided design

    International Nuclear Information System (INIS)

    Barache, J.M.; Beltranda, G.; Blanc, P.

    1987-01-01

    In order to ensure that the data transmitted to the managment system is of the required quality and consistent with the general control command protocols, computer aided design (CAD) was employed for level N4. One describes the use of CAD for the control system of N4 [fr

  11. THE EFFECT OF WEB-BASED COMPUTER-AIDED ART EDUCATION TO ACADEMIC SUCCESS BY CONSTRUCTIVIST APPROACH

    Directory of Open Access Journals (Sweden)

    Adnan TEPECIK

    2014-11-01

    Full Text Available The general objective of this study is to examine the effect of the “Web Based Computer Aided Teaching” activity which is prepared according to the structural approach on the academic success of the students who study art at graduate level. With this study, interactive education material has been prepared for the web based computer aided teaching and teaching activity has been carried out with two separate student groups. One group has been subjected to the traditional teaching method, and the other has been subjected to the web based computer aided teaching. The success and the learning persistency of the students after the application have been examined. “Multiple subject – one factor experimental pattern” among the experimental models has been used as the pattern in the study. In this respect, the study has been carried out on the pattern with the pretest-posttest control group. A significant increase has been seen in the academic successes of the students who participated in the Web Based Computer Aided teaching applications when compared to the academic successes of the students who participated in the Traditional Teaching method. It has been revealed that the actions in the test group are more effective than those in the control group. Relying on the obtained results, it can be suggested that new studies can be carried out including the web based computer aided teaching applications for different lessons in the field of art education.

  12. Individualized computer-aided education in mammography based on user modeling: concept and preliminary experiments.

    Science.gov (United States)

    Mazurowski, Maciej A; Baker, Jay A; Barnhart, Huiman X; Tourassi, Georgia D

    2010-03-01

    The authors propose the framework for an individualized adaptive computer-aided educational system in mammography that is based on user modeling. The underlying hypothesis is that user models can be developed to capture the individual error making patterns of radiologists-in-training. In this pilot study, the authors test the above hypothesis for the task of breast cancer diagnosis in mammograms. The concept of a user model was formalized as the function that relates image features to the likelihood/extent of the diagnostic error made by a radiologist-in-training and therefore to the level of difficulty that a case will pose to the radiologist-in-training (or "user"). Then, machine learning algorithms were implemented to build such user models. Specifically, the authors explored k-nearest neighbor, artificial neural networks, and multiple regression for the task of building the model using observer data collected from ten Radiology residents at Duke University Medical Center for the problem of breast mass diagnosis in mammograms. For each resident, a user-specific model was constructed that predicts the user's expected level of difficulty for each presented case based on two BI-RADS image features. In the experiments, leave-one-out data handling scheme was applied to assign each case to a low-predicted-difficulty or a high-predicted-difficulty group for each resident based on each of the three user models. To evaluate whether the user model is useful in predicting difficulty, the authors performed statistical tests using the generalized estimating equations approach to determine whether the mean actual error is the same or not between the low-predicted-difficulty group and the high-predicted-difficulty group. When the results for all observers were pulled together, the actual errors made by residents were statistically significantly higher for cases in the high-predicted-difficulty group than for cases in the low-predicted-difficulty group for all modeling

  13. Utilizing computerized entertainment education in the development of decision aids for lower literate and naïve computer users.

    Science.gov (United States)

    Jibaja-Weiss, Maria L; Volk, Robert J

    2007-01-01

    Decision aids have been developed by using various delivery methods, including interactive computer programs. Such programs, however, still rely heavily on written information, health and digital literacy, and reading ease. We describe an approach to overcome these potential barriers for low-literate, underserved populations by making design considerations for poor readers and naïve computer users and by using concepts from entertainment education to engage the user and to contextualize the content for the user. The system design goals are to make the program both didactic and entertaining and the navigation and graphical user interface as simple as possible. One entertainment education strategy, the soap opera, is linked seamlessly to interactive learning modules to enhance the content of the soap opera episodes. The edutainment decision aid model (EDAM) guides developers through the design process. Although designing patient decision aids that are educational, entertaining, and targeted toward poor readers and those with limited computer skills is a complex task, it is a promising strategy for aiding this population. Entertainment education may be a highly effective approach to promoting informed decision making for patients with low health literacy.

  14. Computer aided drug design

    Science.gov (United States)

    Jain, A.

    2017-08-01

    Computer based method can help in discovery of leads and can potentially eliminate chemical synthesis and screening of many irrelevant compounds, and in this way, it save time as well as cost. Molecular modeling systems are powerful tools for building, visualizing, analyzing and storing models of complex molecular structure that can help to interpretate structure activity relationship. The use of various techniques of molecular mechanics and dynamics and software in Computer aided drug design along with statistics analysis is powerful tool for the medicinal chemistry to synthesis therapeutic and effective drugs with minimum side effect.

  15. Evaluation of Sports Trainers Perceptions on Computer Aided Education Related to the Attitudes toward Learning

    Science.gov (United States)

    Murathan, Talha; Kaya, Oktay

    2016-01-01

    Technologic developments have--the same as they have done it in every sector--influenced the education system. These influences have forced to use the computer in the education-training applications within the education system. The aim of this research is to determine, compare, and examine the influences on the conduct for learning of sport…

  16. Implementing AIDS Education

    Directory of Open Access Journals (Sweden)

    Grace C. Huerta

    1996-08-01

    Full Text Available The world has been challenged by the AIDS epidemic for 15 years. In 1985, the U.S. Department of Health and Human Services, Centers for Disease Control, allocated funds to all state departments of education to assist schools in the development of AIDS education policies and programs. Yet, these policies do not ensure that all students receive effective AIDS education. On September 21, 1991, the Arizona Legislature passed Senate Bill 1396, which requires public schools to annually provide AIDS education in grades K-12. The bill was rescinded in 1995. With prohibitive curriculum guidelines, limited teacher training opportunities and tremendous instructional demands, this educational policy was implemented in disparate forms. By examining the perspectives of the Arizona educators (representing three school districts, this qualitative study reveals how teachers ultimately controlled the delivery and nature of AIDS instruction based upon personal values, views of teacher roles, and their interpretation of the mandate itself.

  17. Computer aided design

    International Nuclear Information System (INIS)

    Bronson, J.D.; Cowden, T.; Haenni, D.R.; Hargis, C.

    1985-01-01

    The research program at the Cyclotron Institute frequently requires special purpose printed circuit boards. These are used either in data acquisition equipment or for control of an experiment. Also during this period of building the new K500 machine, many special boards will be needed for the computerized control system. Due to the very tedious and time consuming process of producing a printed circuit board by the usual drawing techniques, an inexpensive computer aided design (CAD) system was sought. Such a system of software, called P-CAD EDA, was purchased from Personal CAD Systems Inc. and the required hardware to run it was assembled. This hardware consisted of equipping an IBM PC with 640 kilo-bytes of memory, a 20 Mbyte hard disk drive, 2 floppy disk drives, a color monitor, a Calcomp 1043 plotter, a mouse and an Epson FX-80 printer. A block diagram of the system is shown

  18. Computer aided control engineering

    DEFF Research Database (Denmark)

    Szymkat, Maciej; Ravn, Ole

    1997-01-01

    Current developments in the field of Computer Aided Control Engineering (CACE) have a visible impact on the design methodologies and the structure of the software tools supporting them. Today control engineers has at their disposal libraries, packages or programming environments that may...... in CACE enhancing efficient flow of information between the tools supporting the following phases of the design process. In principle, this flow has to be two-way, and more or less automated, in order to enable the engineer to observe the propagation of the particular design decisions taken at various...... levels.The major conclusions of the paper are related with identifying the factors affecting the software tool integration in a way needed to facilitate design "inter-phase" communication. These are: standard application interfaces, dynamic data exchange mechanisms, code generation techniques and general...

  19. Intelligent computer aided training systems in the real world: Making the technology accessible to the educational mainstream

    Science.gov (United States)

    Kovarik, Madeline

    1993-01-01

    Intelligent computer aided training systems hold great promise for the application of this technology to mainstream education and training. Yet, this technology, which holds such a vast potential impact for the future of education and training, has had little impact beyond the enclaves of government research labs. This is largely due to the inaccessibility of the technology to those individuals in whose hands it can have the greatest impact, teachers and educators. Simply throwing technology at an educator and expecting them to use it as an effective tool is not the answer. This paper provides a background into the use of technology as a training tool. MindLink, developed by HyperTech Systems, provides trainers with a powerful rule-based tool that can be integrated directly into a Windows application. By embedding expert systems technology it becomes more accessible and easier to master.

  20. Development of a computer-aided clinical patient education system to provide appropriate individual nursing care for psychiatric patients.

    Science.gov (United States)

    Tseng, Kuan-Jui; Liou, Tsan-Hon; Chiu, Hung-Wen

    2012-06-01

    A lot of researches have proven that health education can help patients to maintain and improve their health. And it also shortens the time staying in hospital to save medication resource. Because the patients are willing to get healthcare knowledge to enhance the ability of self-care, they pay more attention to the health education. In Taiwan, the clinical nurses play an important role in patient education, and the health education take most time in their daily work. Such work includes the collection, production and delivery of education materials. To generate the correct and customized health education material is the key of success of patient education. In this study, we established a computer-aided health education contents generating system for psychiatric patients by integrating the databases for disease, medicine and nursing knowledge to assist nurse generating the customized health education document suitable for different patients. This system was evaluated by clinical nurses in usability and feasibility. This system is helpful for nurse to carry out the clinical health education to patients and further to encourage patient to pay attention to self-health.

  1. Computer aided surface representation

    Energy Technology Data Exchange (ETDEWEB)

    Barnhill, R.E.

    1989-02-09

    The central research problem of this project is the effective representation and display of surfaces, interpolating to given information, in three or more dimensions. In a typical problem, we wish to create a surface from some discrete information. If this information is itself on another surface, the problem is to determine a surface defined on a surface,'' which is discussed below. Often, properties of an already constructed surface are desired: such geometry processing'' is described below. The Summary of Proposed Research from our original proposal describes the aims of this research project. This Summary and the Table of Contents from the original proposal are enclosed as an Appendix to this Progress Report. The broad sweep from constructive mathematics through algorithms and computer graphics displays is utilized in the research. The wide range of activity, directed in both theory and applications, makes this project unique. Last month in the first Ardent Titan delivered in the State of Arizona came to our group, funded by the DOE and Arizona State University. Although the Titan is a commercial product, its newness requires our close collaboration with Ardent to maximize results. During the past year, four faculty members and several graduate research assistants have worked on this DOE project. The gaining of new professionals is an important aspect of this project. A listing of the students and their topics is given in the Appendix. The most significant publication during the past year is the book, Curves and Surfaces for Computer Aided Geometric Design, by Dr. Gerald Farin. This 300 page volume helps fill a considerable gap in the subject and includes many new results on Bernstein-Bezier curves and surfaces.

  2. Computer-aided cleanup

    International Nuclear Information System (INIS)

    Williams, J.; Jones, B.

    1994-01-01

    In late 1992, the remedial investigation of operable unit 2 at the Department of Energy (DOE) Superfund site in Fernald, Ohio was in trouble. Despite years of effort--including an EPA-approved field-investigation work plan, 123 soil borings, 51 ground-water-monitoring wells, analysis of more than 650 soil and ground-water samples, and preparation of a draft remedial-investigation (RI) report--it was not possible to conclude if contaminated material in the unit was related to ground-water contamination previously detected beneath and beyond the site boundary. Compounding the problem, the schedule for the RI, feasibility study and record of decision for operable unit 2 was governed by a DOE-EPA consent agreement stipulating penalties of up to $10,000 per week for not meeting scheduled milestones--and time was running out. An advanced three-dimensional computer model confirmed that radioactive wastes dumped at the Fernald, Ohio Superfund site had contaminated ground water, after years of previous testing has been inconclusive. The system is now being used to aid feasibility and design work on the more-than-$1 billion remediation project

  3. Puppetry and AIDS education.

    Science.gov (United States)

    Friedman, G

    1992-01-01

    The effectiveness of puppet theater in communicating information about acquired immunodeficiency syndrome (AIDS) has been demonstrated in a project launched in 1988 by the African Research and Education Puppetry Program (AREPP). Puppetry is a vital part of the Bambara, Bozo, and Yoruba cultures. "Puppets Against AIDS" tells the story of a condom refuser who transmits the AIDS virus to his wife and their infant. An evaluation conducted by social epidemiologists in 1989 found the production to be comprehensive in its educational messages and effective in contributing to the audiences' knowledge and intended behavioral changes. A discussion period follows the production. The show was subsequently incorporated into an existing community-based AIDS education program. Because AIDS touches upon sensitive and often taboo areas of social life, the dissemination of information through puppets is not perceived as threatening as interpersonal interaction.

  4. Computer Aided Mathematics

    DEFF Research Database (Denmark)

    Sinclair, Robert

    1998-01-01

    Course notes of a PhD course held in 1998. The central idea is to introduce students to computational mathematics using object oriented programming in C++.......Course notes of a PhD course held in 1998. The central idea is to introduce students to computational mathematics using object oriented programming in C++....

  5. Computer aided surface representation

    Energy Technology Data Exchange (ETDEWEB)

    Barnhill, R E

    1987-11-01

    The aims of this research are the creation of new surface forms and the determination of geometric and physical properties of surfaces. The full sweep from constructive mathematics through the implementation of algorithms and the interactive computer graphics display of surfaces is utilized. Both three-dimensional and multi- dimensional surfaces are considered. Particular emphasis is given to the scientific computing solution of Department of Energy problems. The methods that we have developed and that we are proposing to develop allow applications such as: Producing smooth contour maps from measured data, such as weather maps. Modeling the heat distribution inside a furnace from sample measurements. Terrain modeling based on satellite pictures. The investigation of new surface forms includes the topics of triangular interpolants, multivariate interpolation, surfaces defined on surfaces and monotone and/or convex surfaces. The geometric and physical properties considered include contours, the intersection of surfaces, curvatures as a interrogation tool, and numerical integration.

  6. Computer aided airship design

    Science.gov (United States)

    Davis, S. J.; Rosenstein, H.

    1975-01-01

    The Comprehensive Airship Sizing and Performance Computer Program (CASCOMP) is described which was developed and used in the design and evaluation of advanced lighter-than-air (LTA) craft. The program defines design details such as engine size and number, component weight buildups, required power, and the physical dimensions of airships which are designed to meet specified mission requirements. The program is used in a comparative parametric evaluation of six advanced lighter-than-air concepts. The results indicate that fully buoyant conventional airships have the lightest gross lift required when designed for speeds less than 100 knots and the partially buoyant concepts are superior above 100 knots. When compared on the basis of specific productivity, which is a measure of the direct operating cost, the partially buoyant lifting body/tilting prop-rotor concept is optimum.

  7. Computer graphics in engineering education

    CERN Document Server

    Rogers, David F

    2013-01-01

    Computer Graphics in Engineering Education discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) as an instructional material in engineering education. Each of the nine chapters of this book covers topics and cites examples that are relevant to the relationship of CAD-CAM with engineering education. The first chapter discusses the use of computer graphics in the U.S. Naval Academy, while Chapter 2 covers key issues in instructional computer graphics. This book then discusses low-cost computer graphics in engineering education. Chapter 4 discusses the uniform b

  8. Usage of Thin-Client/Server Architecture in Computer Aided Education

    Science.gov (United States)

    Cimen, Caghan; Kavurucu, Yusuf; Aydin, Halit

    2014-01-01

    With the advances of technology, thin-client/server architecture has become popular in multi-user/single network environments. Thin-client is a user terminal in which the user can login to a domain and run programs by connecting to a remote server. Recent developments in network and hardware technologies (cloud computing, virtualization, etc.)…

  9. Computer aids for plant operators

    International Nuclear Information System (INIS)

    Joly, J.P.

    1992-01-01

    For some time, particularly since the TMI accident, nuclear power plant operators have been aware of the difficulties involved in diagnosing accidents and returning plants to their stable, safe operating mode. There are various possible solutions to these problems: improve control organization during accident situations, rewrite control procedures, integrate safety engineers in shifts, improve control rooms, and implement additional computer aids. The purpose of this presentation is to describe the efforts undertaken by EDF over the last few years in this field

  10. Computer-Aided Facilities Management Systems (CAFM).

    Science.gov (United States)

    Cyros, Kreon L.

    Computer-aided facilities management (CAFM) refers to a collection of software used with increasing frequency by facilities managers. The six major CAFM components are discussed with respect to their usefulness and popularity in facilities management applications: (1) computer-aided design; (2) computer-aided engineering; (3) decision support…

  11. Computer-aided lens assembly

    Science.gov (United States)

    Tomlinson, Richard; Alcock, Rob; Petzing, Jon; Coupland, Jeremy

    2004-01-01

    We propose a computer-aided method of lens manufacture that allows assembly, adjustment, and test phases to be run concurrently until an acceptable level of optical performance is reached. Misalignment of elements within a compound lens is determined by a comparison of the results of physical ray tracing by use of an array of Gaussian laser beams with numerically obtained geometric ray traces. An estimate of misalignment errors is made, and individual elements are adjusted in an iterative manner until performance criteria are achieved. The method is illustrated for the alignment of an air-spaced doublet.

  12. Computer-aided instruction system

    International Nuclear Information System (INIS)

    Teneze, Jean Claude

    1968-01-01

    This research thesis addresses the use of teleprocessing and time sharing by the RAX IBM system and the possibility to introduce a dialog with the machine to develop an application in which the computer plays the role of a teacher for different pupils at the same time. Two operating modes are thus exploited: a teacher-mode and a pupil-mode. The developed CAI (computer-aided instruction) system comprises a checker to check the course syntax in teacher-mode, a translator to trans-code the course written in teacher-mode into a form which can be processes by the execution programme, and the execution programme which presents the course in pupil-mode

  13. Computer-aided system design

    Science.gov (United States)

    Walker, Carrie K.

    1991-01-01

    A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

  14. Computer Aided Battery Engineering Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, Ahmad

    2016-06-07

    A multi-national lab collaborative team was assembled that includes experts from academia and industry to enhance recently developed Computer-Aided Battery Engineering for Electric Drive Vehicles (CAEBAT)-II battery crush modeling tools and to develop microstructure models for electrode design - both computationally efficient. Task 1. The new Multi-Scale Multi-Domain model framework (GH-MSMD) provides 100x to 1,000x computation speed-up in battery electrochemical/thermal simulation while retaining modularity of particles and electrode-, cell-, and pack-level domains. The increased speed enables direct use of the full model in parameter identification. Task 2. Mechanical-electrochemical-thermal (MECT) models for mechanical abuse simulation were simultaneously coupled, enabling simultaneous modeling of electrochemical reactions during the short circuit, when necessary. The interactions between mechanical failure and battery cell performance were studied, and the flexibility of the model for various batteries structures and loading conditions was improved. Model validation is ongoing to compare with test data from Sandia National Laboratories. The ABDT tool was established in ANSYS. Task 3. Microstructural modeling was conducted to enhance next-generation electrode designs. This 3- year project will validate models for a variety of electrodes, complementing Advanced Battery Research programs. Prototype tools have been developed for electrochemical simulation and geometric reconstruction.

  15. Computer aided analysis of disturbances

    International Nuclear Information System (INIS)

    Baldeweg, F.; Lindner, A.

    1986-01-01

    Computer aided analysis of disturbances and the prevention of failures (diagnosis and therapy control) in technological plants belong to the most important tasks of process control. Research in this field is very intensive due to increasing requirements to security and economy of process control and due to a remarkable increase of the efficiency of digital electronics. This publication concerns with analysis of disturbances in complex technological plants, especially in so called high risk processes. The presentation emphasizes theoretical concept of diagnosis and therapy control, modelling of the disturbance behaviour of the technological process and the man-machine-communication integrating artificial intelligence methods, e.g., expert system approach. Application is given for nuclear power plants. (author)

  16. Computer-Aided Modeling Framework

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    . In this contribution, the concept of template-based modeling is presented and application is highlighted for the specific case of catalytic membrane fixed bed models. The modeling template is integrated in a generic computer-aided modeling framework. Furthermore, modeling templates enable the idea of model reuse...... with a case study related to the modeling of a catalytic membrane reactor coupling dehydrogenation of ethylbenzene with hydrogenation of nitrobenzene, and, for the performance evaluation of an atomizer product. In the first case study, the reactor type is where the reactions are thermodynamically limited......, such as, steam reforming and the production of olefins from inexpensive paraffins via dehydrogenation. The generated process model is based on Fickian diffusion model, which is the most widely used to account for the intraparticle mass transfer resistance. The model of the process can help to predict...

  17. Computer-aided structure analysis

    International Nuclear Information System (INIS)

    Szalontai, G.; Simon, Z.; Csapo, Z.; Farkas, M.; Pfeifer, Gy.

    1980-01-01

    The results obtained from the computer-aided interpretation of 13 C NMR and IR spectra using the artificial intelligence approach are presented. In its present state the output of the system is a list of functional groups which are resonable candidates for the final structural isomers. The input requires empirical formula, 13 C NMR data (off resonance data also) and IR spectral data. The confirmation of the presence of a functional group is based on comparison of the experimental data with the spectral properties of functional groups stored in a property matrix. If the molecular weight of the compounds studied is less or equal 500, the output contains usually 1.5-2.5 times more groups than really present, in most cases without the loss of the real ones. (author)

  18. Computer aided fault tree synthesis

    International Nuclear Information System (INIS)

    Poucet, A.

    1983-01-01

    Nuclear as well as non-nuclear organisations are showing during the past few years a growing interest in the field of reliability analysis. This urges for the development of powerful, state of the art methods and computer codes for performing such analysis on complex systems. In this report an interactive, computer aided approach is discussed, based on the well known fault tree technique. The time consuming and difficut task of manually constructing a system model (one or more fault trees) is replaced by an efficient interactive procedure in which the flexibility and the learning process inherent to the manual approach are combined with the accuracy in the modelling and the speed of the fully automatical approach. The method presented is based upon the use of a library containing component models. The possibility of setting up a standard library of models of general use and the link with a data collection system are discussed. The method has been implemented in the CAFTS-SALP software package which is described shortly in the report

  19. CAESY - COMPUTER AIDED ENGINEERING SYSTEM

    Science.gov (United States)

    Wette, M. R.

    1994-01-01

    Many developers of software and algorithms for control system design have recognized that current tools have limits in both flexibility and efficiency. Many forces drive the development of new tools including the desire to make complex system modeling design and analysis easier and the need for quicker turnaround time in analysis and design. Other considerations include the desire to make use of advanced computer architectures to help in control system design, adopt new methodologies in control, and integrate design processes (e.g., structure, control, optics). CAESY was developed to provide a means to evaluate methods for dealing with user needs in computer-aided control system design. It is an interpreter for performing engineering calculations and incorporates features of both Ada and MATLAB. It is designed to be reasonably flexible and powerful. CAESY includes internally defined functions and procedures, as well as user defined ones. Support for matrix calculations is provided in the same manner as MATLAB. However, the development of CAESY is a research project, and while it provides some features which are not found in commercially sold tools, it does not exhibit the robustness that many commercially developed tools provide. CAESY is written in C-language for use on Sun4 series computers running SunOS 4.1.1 and later. The program is designed to optionally use the LAPACK math library. The LAPACK math routines are available through anonymous ftp from research.att.com. CAESY requires 4Mb of RAM for execution. The standard distribution medium is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. CAESY was developed in 1993 and is a copyrighted work with all copyright vested in NASA.

  20. Computer-aided design and computer science technology

    Science.gov (United States)

    Fulton, R. E.; Voigt, S. J.

    1976-01-01

    A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

  1. New Paradigms for Computer Aids to Invention.

    Science.gov (United States)

    Langston, M. Diane

    Many people are interested in computer aids to rhetorical invention and want to know how to evaluate an invention aid, what the criteria are for a good one, and how to assess the trade-offs involved in buying one product or another. The frame of reference for this evaluation is an "old paradigm," which treats the computer as if it were…

  2. Students' perceptions of a multimedia computer-aided instruction ...

    African Journals Online (AJOL)

    Objective. To develop an interactive muttimedia-based computer-aided instruction (CAI) programme, to detennine its educational worth and efficacy in a multicuttural academic environment and to evaluate its usage by students with differing levels of computer literacy. Design. A prospective descriptive study evaluating ...

  3. Students' perceptions of a multimedia computer-aided instruction ...

    African Journals Online (AJOL)

    Objective. To develop an interactive muttimedia-based computer-aided instruction (CAI) programme, to detennine its educational worth and efficacy in a multicuttural academic environment and to evaluate its usage by students with differing levels of computer literacy. Design. A prospective descriptive study evaluating pre-.

  4. Computer-aided Ear-training : A Contemporary Approach to Kodály's Music Educational Philosophy

    OpenAIRE

    Király, Susanna

    2012-01-01

    My doctoral thesis has involved two related tasks. The first was to analyse Zoltán Kodály s philosophy of music education and, on this basis, to develop a computer-assisted instructional method (CAI) for teaching music theory and solfège (ear-training). The second task was to experiment with the effectiveness of this method and compare it with traditional approaches to teaching. Many students find music theory and ear training difficult. During the 1990s, in connection with my licentiate thes...

  5. COMPUTER AIDED DESIGN OF CUTTING TOOLS

    Directory of Open Access Journals (Sweden)

    Jakub Matuszak

    2015-11-01

    Full Text Available Correct and stable machining process requires an appropriate cutting tool. In most cases the tool can be selected by using special tool catalogs often available in online version. But in some cases there is a need to design unusual tools, for special treatment, which are not available in tool manufacturers’ catalogs. Proper tool design requires strength and geometric calculations. Moreover, in many cases specific technical documentation is required. By using Computer Aided Design of cutting tools this task can be carried out quickly and with high accuracy. Cutting tool visualization in CAD programs gives a clear overview of the design process. Besides, these programs provide the ability to simulate real machining process. Nowadays, 3D modeling in CAD programs is a fundamental tool for engineers. Therefore, it is important to use them in the education process.

  6. Remote handling prospects. Computer aided remote handling

    International Nuclear Information System (INIS)

    Vertut, J.

    1984-01-01

    Mechanical manipulators, electrical control manipulators and computer aided manipulators were successively developed. The aim of computer aided manipulators is the realization of complex or tricky job in adverse environment but man is required for non routine work or for situation in evolution. French effort is developed in the frame of the project automation and advanced robotics and new problems have to be solved particularly at the interface man/machine [fr

  7. Computer aided design for the nuclear industry

    International Nuclear Information System (INIS)

    Basson, Keith

    1986-01-01

    The paper concerns the new computer aided design (CAD) centre for the United Kingdom nuclear industry, and its applications. A description of the CAD system is given, including the current projects at the CAD centre. Typical applications of the 3D CAD plant based models, stress analysis studies, and the extraction of data from CAD drawings to produce associated documentation, are all described. Future developments using computer aided design systems are also considered. (U.K.)

  8. A computer-aided regulator design.

    Science.gov (United States)

    Karmarkar, J. S.; Siljak, D. D.

    1972-01-01

    A unified computer-aided method for the design of linear and nonlinear regulators is discussed. The general mathematical programming approach considered involves the determination of a vector that solves the problem of minimizing the objective function subject to constraints. Classical design problems stated are related to stability design, dominant mode design, and comprehensive design. A computer algorithm is also developed.

  9. Computer-Aided Design for Electron Microscopy

    Czech Academy of Sciences Publication Activity Database

    Lencová, Bohumila

    2004-01-01

    Roč. 6, č. 1 (2004), s. 51-53 ISSN 1439-4243 Institutional research plan: CEZ:AV0Z2065902 Keywords : magnetic electron lenses * accuracy of computation * computer-aided design Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  10. Computer-aided decision making.

    Science.gov (United States)

    Keith M. Reynolds; Daniel L. Schmoldt

    2006-01-01

    Several major classes of software technologies have been used in decisionmaking for forest management applications over the past few decades. These computer-based technologies include mathematical programming, expert systems, network models, multi-criteria decisionmaking, and integrated systems. Each technology possesses unique advantages and disadvantages, and has...

  11. Computer Aided Solvent Selection and Design Framework

    DEFF Research Database (Denmark)

    Mitrofanov, Igor; Conte, Elisa; Abildskov, Jens

    and computer-aided tools and methods for property prediction and computer-aided molecular design (CAMD) principles. This framework is applicable for solvent selection and design in product design as well as process design. The first module of the framework is dedicated to the solvent selection and design...... in terms of: physical and chemical properties (solvent-pure properties); Environment, Health and Safety (EHS) characteristic (solvent-EHS properties); operational properties (solvent–solute properties). 3. Performing the search. The search step consists of two stages. The first is a generation and property...... identification of solvent candidates using special software ProCAMD and ProPred, which are the implementations of computer-aided molecular techniques. The second consists of assigning the RS-indices following the reaction–solvent and then consulting the known solvent database and identifying the set of solvents...

  12. Computer aided training system development

    International Nuclear Information System (INIS)

    Midkiff, G.N.

    1987-01-01

    The first three phases of Training System Development (TSD) -- job and task analysis, curriculum design, and training material development -- are time consuming and labor intensive. The use of personal computers with a combination of commercial and custom-designed software resulted in a significant reduction in the man-hours required to complete these phases for a Health Physics Technician Training Program at a nuclear power station. This paper reports that each step in the training program project involved the use of personal computers: job survey data were compiled with a statistical package, task analysis was performed with custom software designed to interface with a commercial database management program. Job Performance Measures (tests) were generated by a custom program from data in the task analysis database, and training materials were drafted, edited, and produced using commercial word processing software

  13. Education for Computers

    Science.gov (United States)

    Heslep, Robert D.

    2012-01-01

    The computer engineers who refer to the education of computers do not have a definite idea of education and do not bother to justify the fuzzy ones to which they allude. Hence, they logically cannot specify the features a computer must have in order to be educable. This paper puts forth a non-standard, but not arbitrary, concept of education that…

  14. COMPUTER GAMES AND EDUCATION

    OpenAIRE

    Sukhov, Anton

    2018-01-01

    This paper devoted to the research of educational resources and possibilities of modern computer games. The “internal” educational aspects of computer games include educational mechanism (a separate or integrated “tutorial”) and representation of a real or even fantastic educational process within virtual worlds. The “external” dimension represents educational opportunities of computer games for personal and professional development in different genres of computer games (various transport, so...

  15. Large-scale computer-aided design

    OpenAIRE

    Adeli, Hojjat

    1997-01-01

    The author and his associates have been 'working on creating novel design theories and computational models with two broad objectives: automation and optimization. This paper is a summary of the author's Keynote Lecture based on the research done by the author and his associates recently. Novel neurocomputing algorithms are presented for large-scale computer-aided design and optimization. This research demonstrates how a new level is achieved in design automation through the ingenious use and...

  16. Frontiers in Computer Education

    CERN Document Server

    Zhu, Egui; 2011 International Conference on Frontiers in Computer Education (ICFCE 2011)

    2012-01-01

    This book is the proceedings of the 2011 International Conference on Frontiers in Computer Education (ICFCE 2011) in Sanya, China, December 1-2, 2011. The contributions can be useful for researchers, software engineers, and programmers, all interested in promoting the computer and education development. Topics covered are computing and communication technology, network management, wireless networks, telecommunication, Signal and Image Processing, Machine Learning, educational management, educational psychology, educational system, education engineering, education technology and training.  The emphasis is on methods and calculi for computer science and education technology development, verification and verification tools support, experiences from doing developments, and the associated theoretical problems.

  17. Computer Aided Continuous Time Stochastic Process Modelling

    DEFF Research Database (Denmark)

    Kristensen, N.R.; Madsen, Henrik; Jørgensen, Sten Bay

    2001-01-01

    A grey-box approach to process modelling that combines deterministic and stochastic modelling is advocated for identification of models for model-based control of batch and semi-batch processes. A computer-aided tool designed for supporting decision-making within the corresponding modelling cycle...

  18. Computer-aided design of rolling mills

    Indian Academy of Sciences (India)

    In the design of rolling mills equipment, computer-aided design has been widely used. The available software, which covers both steady state and dynamic analysis of items such as mill stands, drive systems, manipulators, cooling beds, roll cooling, and automatic gauge control systems, is reviewed with special reference to ...

  19. Computer-Aided Corrosion Program Management

    Science.gov (United States)

    MacDowell, Louis

    2010-01-01

    This viewgraph presentation reviews Computer-Aided Corrosion Program Management at John F. Kennedy Space Center. The contents include: 1) Corrosion at the Kennedy Space Center (KSC); 2) Requirements and Objectives; 3) Program Description, Background and History; 4) Approach and Implementation; 5) Challenges; 6) Lessons Learned; 7) Successes and Benefits; and 8) Summary and Conclusions.

  20. Evolution of Computer-Aided Facility Management.

    Science.gov (United States)

    McLean, William D.

    1998-01-01

    Presents the benefits facilities managers could realize by converting blueprints, CADD information, and as-built drawings into a computer-aided facility management (CAFM) system. CAFM links graphics to databases, adding information on types of spaces, occupants, materials, equipment, costs, and other building systems. This helps facilities…

  1. Computational Thinking in K-9 Education

    NARCIS (Netherlands)

    Mannila, Linda; Dagiene, Valentina; Demo, Barbara; Grgurina, Natasa; Mirolo, Claudio; Rolandsson, Lennart; Settle, Amber

    2014-01-01

    In this report we consider the current status of the coverage of computer science in education at the lowest levels of education in multiple countries. Our focus is on computational thinking (CT), a term meant to encompass a set of concepts and thought processes that aid in formulating problems and

  2. Computer-aided dispatching system design specification

    Energy Technology Data Exchange (ETDEWEB)

    Briggs, M.G.

    1997-12-16

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP).

  3. Genetic algorithms in computer aided inductor design

    OpenAIRE

    Jean Fivaz; Willem A. Cronjé

    2004-01-01

    The goal of this investigation is to determine the advantages of using genetic algorithms in computer-aided design as applied to inductors.  These advantages are exploited in design problems with a number of specifications and constraints, as encountered in power electronics during practical inductor design. The design tool should be able to select components, such as cores and wires, from databases of available components, and evaluate these choices based on the components’ characteristic d...

  4. Computer aided design of database relation schemes

    OpenAIRE

    Brehovský, Martin

    2006-01-01

    Project "Computer aided design of database relation schemes" shows the importance and problems with designing nowadays Database schemas and gives ideas on possible solutions to these problems. Its main purpose is to describe a solution on optimizing Database designing that is transforming database schemas into tables. These tables should also fulfill the requirements based on the need for data consistency and database maintenance. Main part of this project is an application, which implements ...

  5. Computer-aided dispatching system design specification

    International Nuclear Information System (INIS)

    Briggs, M.G.

    1997-01-01

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP)

  6. Computer-aided power systems analysis

    CERN Document Server

    Kusic, George

    2008-01-01

    Computer applications yield more insight into system behavior than is possible by using hand calculations on system elements. Computer-Aided Power Systems Analysis: Second Edition is a state-of-the-art presentation of basic principles and software for power systems in steady-state operation. Originally published in 1985, this revised edition explores power systems from the point of view of the central control facility. It covers the elements of transmission networks, bus reference frame, network fault and contingency calculations, power flow on transmission networks, generator base power setti

  7. Integrated computer-aided design using minicomputers

    Science.gov (United States)

    Storaasli, O. O.

    1980-01-01

    Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

  8. Computer-Aided Drug Design in Epigenetics

    Directory of Open Access Journals (Sweden)

    Wenchao Lu

    2018-03-01

    Full Text Available Epigenetic dysfunction has been widely implicated in several diseases especially cancers thus highlights the therapeutic potential for chemical interventions in this field. With rapid development of computational methodologies and high-performance computational resources, computer-aided drug design has emerged as a promising strategy to speed up epigenetic drug discovery. Herein, we make a brief overview of major computational methods reported in the literature including druggability prediction, virtual screening, homology modeling, scaffold hopping, pharmacophore modeling, molecular dynamics simulations, quantum chemistry calculation, and 3D quantitative structure activity relationship that have been successfully applied in the design and discovery of epi-drugs and epi-probes. Finally, we discuss about major limitations of current virtual drug design strategies in epigenetics drug discovery and future directions in this field.

  9. Method of Computer-aided Instruction in Situation Control Systems

    Directory of Open Access Journals (Sweden)

    Anatoliy O. Kargin

    2013-01-01

    Full Text Available The article considers the problem of computer-aided instruction in context-chain motivated situation control system of the complex technical system behavior. The conceptual and formal models of situation control with practical instruction are considered. Acquisition of new behavior knowledge is presented as structural changes in system memory in the form of situational agent set. Model and method of computer-aided instruction represent formalization, based on the nondistinct theories by physiologists and cognitive psychologists.The formal instruction model describes situation and reaction formation and dependence on different parameters, effecting education, such as the reinforcement value, time between the stimulus, action and the reinforcement. The change of the contextual link between situational elements when using is formalized.The examples and results of computer instruction experiments of the robot device “LEGO MINDSTORMS NXT”, equipped with ultrasonic distance, touch, light sensors.

  10. Computer aided design of solonoid magnets

    Energy Technology Data Exchange (ETDEWEB)

    DeOlivares, J.M.

    1978-06-01

    Computer programs utilizing Legendre functions and elliptic integral functions have been written to aid in the design of solenoid magnets. The field inside an axisymmetric magnet can be expanded in a converging power series of Legendre functions. The Legendre function approach is very useful for designing solenoid magnets with a high degree of field uniformity. This approach has been programed on the LBL CDC 7600 computer so that one can design an axisymmetric magnet which meets any desired field structure. Two examples of computer designed solenoids are presented. A computer program utilizing elliptic integral functions was also written for the LBL CDC 7600 computer. This method was used in a computer program to verify the results obtained from the Legendre approach and for field calculations within the conductor. The elliptic integral field calculations within the conductor showed that thin solenoids produce field peaking at the ends of the magnet. Computer data is generated for various magnet geometries and compared with theoretical predictions. Computer results and theoretical prediction both show that field peaking is reduced for longer coils, increased for thinner coils and field peaking is a logarithmic function of length, thickness and radius.

  11. Computer aided system engineering for space construction

    Science.gov (United States)

    Racheli, Ugo

    1989-01-01

    This viewgraph presentation covers the following topics. Construction activities envisioned for the assembly of large platforms in space (as well as interplanetary spacecraft and bases on extraterrestrial surfaces) require computational tools that exceed the capability of conventional construction management programs. The Center for Space Construction is investigating the requirements for new computational tools and, at the same time, suggesting the expansion of graduate and undergraduate curricula to include proficiency in Computer Aided Engineering (CAE) though design courses and individual or team projects in advanced space systems design. In the center's research, special emphasis is placed on problems of constructability and of the interruptability of planned activity sequences to be carried out by crews operating under hostile environmental conditions. The departure point for the planned work is the acquisition of the MCAE I-DEAS software, developed by the Structural Dynamics Research Corporation (SDRC), and its expansion to the level of capability denoted by the acronym IDEAS**2 currently used for configuration maintenance on Space Station Freedom. In addition to improving proficiency in the use of I-DEAS and IDEAS**2, it is contemplated that new software modules will be developed to expand the architecture of IDEAS**2. Such modules will deal with those analyses that require the integration of a space platform's configuration with a breakdown of planned construction activities and with a failure modes analysis to support computer aided system engineering (CASE) applied to space construction.

  12. AIDS education in the United States.

    Science.gov (United States)

    Bader, E J

    1989-03-01

    There is much to be done about acquired immunodeficiency syndrome (AIDS) education in the US. 41,000 people have died from AIDS. AIDS takes 1 life every 30 minutes. AIDS education was only required in the public schools in 6 states in 1987; however, it was required in 24 in 1988. Most state policies stress abstinence. It is a reliable way to stop the spread of AIDS. AIDS is discussed scientifically in many school programs. Often sex education starts too late--in 9th grade. Students are 13 to 15 years of age. Sometimes the education the pupils end up with is incomplete or erroneous. Some states prohibit educators from presenting material without 1st getting parental consent. The state of Washington is felt to have the best sex education program in the country. Parents cannot remove their children from this program without 1st previewing the curriculum. A "peer-mediated" approach to AIDS education has been tried in Washington, D.C. where students met with a person with AIDS. School counseling should be available to those who know someone who has died of AIDS.

  13. ANALYSIS OF COMPUTER AIDED PROCESS PLANNING TECHNIQUES

    Directory of Open Access Journals (Sweden)

    Salim A. Saleh

    2013-05-01

    Full Text Available Computer Aided Process Planning ( CAPP has been recognized as playing a key role in Computer Integrated Manufacturing ( CIM . It was used as a bridge to link CAD with CAM systems, in order to give the possibility of full integration in agreement with computer engineering to introduce CIM. The benefits of CAPP in the real industrial environment are still to be achieved. Due to different manufacturing applications, many different CAPP systems have been developed. The development of CAPP techniques needs to a summarized classification and a descriptive analysis. This paper presents the most important and famous techniques for the available CAPP systems, which are based on the variant, generative or semi-generative methods, and a descriptive analysis of their application possibilities.

  14. AIDS education video: Karate Kids.

    Science.gov (United States)

    Lowry, C

    1993-01-01

    Street Kids International, in cooperation with the World Health Organization and the National Film Board of Canada, has developed an animated action-adventure video, "Karate Kids," as part of a cross-cultural program of health education that concerns human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS) and targets street children in developing countries. Simple, but explicit, information is delivered during the 22-minute cartoon; the package also includes a training book for educators, and a pocket comic book. Distributed in 17 languages (it is readily adapted to new language versions, independent of the original producers) in over 100 countries, the video is shown in community theaters, hospitals, schools, and prisons, and out of the backs of trucks. It is easily copied, which is encouraged. After 3 years in distribution, field evaluation has demonstrated that the greatest strength of the video is its ability to stimulate discussion where no discussion was taking place before. Critics include those who believe there is no need for it and those who feel it should be used alone. The results of one evaluation study showed use of the video alone was insufficient; those of a cross-cultural participatory evaluation survey indicated a significant impact on knowledge and attitudes when the video was followed by discussion. Another significant aspect of the project is that it treats street children with respect; they are actors, not victims, who have legitimate needs and rights. They become visible in a world that is often unaware of them.

  15. computer-aided root aided root aided root aided root-locus

    African Journals Online (AJOL)

    User

    equation are the same as the poles of the close loop system. Ideally, a desired performance can be achieved a control system by adjusting the location of roots in the s-plane by varying one or mo system parameters. Root-locus Method is a line. 8023278605. AIDED ROOT. AIDED ROOT-LOCUS NUMERICAL TECHNIQUE.

  16. Framework for computer-aided systems design

    International Nuclear Information System (INIS)

    Esselman, W.H.

    1992-01-01

    Advanced computer technology, analytical methods, graphics capabilities, and expert systems contribute to significant changes in the design process. Continued progress is expected. Achieving the ultimate benefits of these computer-based design tools depends on successful research and development on a number of key issues. A fundamental understanding of the design process is a prerequisite to developing these computer-based tools. In this paper a hierarchical systems design approach is described, and methods by which computers can assist the designer are examined. A framework is presented for developing computer-based design tools for power plant design. These tools include expert experience bases, tutorials, aids in decision making, and tools to develop the requirements, constraints, and interactions among subsystems and components. Early consideration of the functional tasks is encouraged. Methods of acquiring an expert's experience base is a fundamental research problem. Computer-based guidance should be provided in a manner that supports the creativity, heuristic approaches, decision making, and meticulousness of a good designer

  17. Speech-enabled Computer-aided Translation

    DEFF Research Database (Denmark)

    Mesa-Lao, Bartolomé

    2014-01-01

    The present study has surveyed post-editor trainees’ views and attitudes before and after the introduction of speech technology as a front end to a computer-aided translation workbench. The aim of the survey was (i) to identify attitudes and perceptions among post-editor trainees before performing...... a post-editing task using automatic speech recognition (ASR); and (ii) to assess the degree to which post-editors’ attitudes and expectations to the use of speech technology changed after actually using it. The survey was based on two questionnaires: the first one administered before the participants...

  18. Genetic algorithms in computer aided inductor design

    Directory of Open Access Journals (Sweden)

    Jean Fivaz

    2004-09-01

    Full Text Available The goal of this investigation is to determine the advantages of using genetic algorithms in computer-aided design as applied to inductors.  These advantages are exploited in design problems with a number of specifications and constraints, as encountered in power electronics during practical inductor design. The design tool should be able to select components, such as cores and wires, from databases of available components, and evaluate these choices based on the components’ characteristic data read from a database of manufacturers’ data-sheets.  The proposed design must always be practically realizable, as close to the desired specifications as possible and within any specified constraints.

  19. Computer Aided in situ Cognitive Behavioral Therapy

    DEFF Research Database (Denmark)

    Chongtay, Rocio A.; Hansen, John Paulin; Decker, Lone

    This article describes the development of a system intended to aid the treatment of certain phobic conditions by the use of computer telephony integration (CTI).A phobia is an irrational fear to some situations or things and interferes with the functioning of the individual that suffers from it. ...... presented here is being designed in a modular and scalable fashion. The web-based module can be accessed anywhere any time from a PC connected to the internet and can be used alone or as supplement for a location-based module for in situ gradual exposure therapy....

  20. Computer aided synthesis: a game theoretic approach

    OpenAIRE

    Bruyère, Véronique

    2017-01-01

    In this invited contribution, we propose a comprehensive introduction to game theory applied in computer aided synthesis. In this context, we give some classical results on two-player zero-sum games and then on multi-player non zero-sum games. The simple case of one-player games is strongly related to automata theory on infinite words. All along the article, we focus on general approaches to solve the studied problems, and we provide several illustrative examples as well as intuitions on the ...

  1. Computer-aided control system design

    International Nuclear Information System (INIS)

    Lebenhaft, J.R.

    1986-01-01

    Control systems are typically implemented using conventional PID controllers, which are then tuned manually during plant commissioning to compensate for interactions between feedback loops. As plants increase in size and complexity, such controllers can fail to provide adequate process regulations. Multivariable methods can be utilized to overcome these limitations. At the Chalk River Nuclear Laboratories, modern control systems are designed and analyzed with the aid of MVPACK, a system of computer programs that appears to the user like a high-level calculator. The software package solves complicated control problems, and provides useful insight into the dynamic response and stability of multivariable systems

  2. Using Computers in Fluids Engineering Education

    Science.gov (United States)

    Benson, Thomas J.

    1998-01-01

    Three approaches for using computers to improve basic fluids engineering education are presented. The use of computational fluid dynamics solutions to fundamental flow problems is discussed. The use of interactive, highly graphical software which operates on either a modern workstation or personal computer is highlighted. And finally, the development of 'textbooks' and teaching aids which are used and distributed on the World Wide Web is described. Arguments for and against this technology as applied to undergraduate education are also discussed.

  3. Computer training aids for nuclear operator training

    International Nuclear Information System (INIS)

    Phillips, J.G.P.; Binns, J.B.H.

    1983-01-01

    The Royal Navy's Nuclear Propulsion School at HMS SULTAN which is responsible for training all ratings and officers who operate Submarine Pressurised Water Reactor plants, has available a varied selection of classroom simulator training aids as well as purpose built Submarine Manoeuvring Room simulators. The use of these classroom training aids in the twelve months prior to Autumn 1981 is discussed. The advantages and disadvantages of using relatively expensive computer based aids to support classroom instruction for students who do not investigate mathematically the dynamics of the Reactor Plant are identified. The conclusions drawn indicate that for students of limited academic ability the classroom simulators are disproportionately expensive in cost, maintenance load, and instructional time. Secondly, the experience gained in the use of the Manoeuvring Room Simulators to train future operators who have just finished the academic phase of their training is outlined. The possible pitfalls for the instructor are discussed and the lessons learnt, concluding that these simulators provide a valuable substitute for the live plant enabling trainees to be brought up to a common standard and reducing their on job training time to an acceptable level. (author)

  4. Geometric modeling for computer aided design

    Science.gov (United States)

    Schwing, James L.

    1993-01-01

    Over the past several years, it has been the primary goal of this grant to design and implement software to be used in the conceptual design of aerospace vehicles. The work carried out under this grant was performed jointly with members of the Vehicle Analysis Branch (VAB) of NASA LaRC, Computer Sciences Corp., and Vigyan Corp. This has resulted in the development of several packages and design studies. Primary among these are the interactive geometric modeling tool, the Solid Modeling Aerospace Research Tool (smart), and the integration and execution tools provided by the Environment for Application Software Integration and Execution (EASIE). In addition, it is the purpose of the personnel of this grant to provide consultation in the areas of structural design, algorithm development, and software development and implementation, particularly in the areas of computer aided design, geometric surface representation, and parallel algorithms.

  5. COMPUTER-AIDED ACQUISITION OF WRITING SKILLS

    NARCIS (Netherlands)

    Verhoef, R.; Tomic, W.

    2008-01-01

    This article presents the results of a review of the literature questioning whether and to what extent computers can be used as a means of instruction for the guided acquisition of communicative writing skills in higher education. To answer this question, the present paper first explores the

  6. Computer-Aided Socket Design For Amputees

    Science.gov (United States)

    Novicov, Aleksey; Foort, James

    1983-07-01

    The fitting of sockets and artificial legs to amputees' stumps is a difficult and lengthy process that can take numerous trials. It has been proposed that most amputees can be fitted with a standard socket shape with minimal changes to the socket. To perform this task, a procedure is being developed at the Medical Engineering Resource Unit for computer aided socket design for amputees. An interactive PASCAL program, operating on a microcomputer, will prompt the operator (or prosthetist) by asking him to determine the condition of the stump. While the operator is inputing this information into the computer, together with a few critical anatomical measurements, a standard socket shape, viewed on the video monitor, will begin to change. Throughout the "shape fitting" procedure, the operator will have the ability to modify the socket shape on the screen with the use of a light pen. It will also be possible to view various cross-sections and different perspectives. The shape fitting procedure continues until a suitable socket shape is designed. Future efforts will focus on transferring the computer designed socket into a physical socket. The overall goal is to provide amputees with a better fit in less time and to objectify socket fitting so that new prosthetists may be easily taught.

  7. A computer-aided continuous assessment system

    Directory of Open Access Journals (Sweden)

    B. C.H. Turton

    1996-12-01

    Full Text Available Universities within the United Kingdom have had to cope with a massive expansion in undergraduate student numbers over the last five years (Committee of Scottish University Principals, 1993; CVCP Briefing Note, 1994. In addition, there has been a move towards modularization and a closer monitoring of a student's progress throughout the year. Since the price/performance ratio of computer systems has continued to improve, Computer- Assisted Learning (CAL has become an attractive option. (Fry, 1990; Benford et al, 1994; Laurillard et al, 1994. To this end, the Universities Funding Council (UFQ has funded the Teaching and Learning Technology Programme (TLTP. However universities also have a duty to assess as well as to teach. This paper describes a Computer-Aided Assessment (CAA system capable of assisting in grading students and providing feedback. In this particular case, a continuously assessed course (Low-Level Languages of over 100 students is considered. Typically, three man-days are required to mark one assessed piece of coursework from the students in this class. Any feedback on how the questions were dealt with by the student are of necessity brief. Most of the feedback is provided in a tutorial session that covers the pitfalls encountered by the majority of the students.

  8. Computer aided diagnosis of diabetic peripheral neuropathy

    Science.gov (United States)

    Chekh, Viktor; Soliz, Peter; McGrew, Elizabeth; Barriga, Simon; Burge, Mark; Luan, Shuang

    2014-03-01

    Diabetic peripheral neuropathy (DPN) refers to the nerve damage that can occur in diabetes patients. It most often affects the extremities, such as the feet, and can lead to peripheral vascular disease, deformity, infection, ulceration, and even amputation. The key to managing diabetic foot is prevention and early detection. Unfortunately, current existing diagnostic techniques are mostly based on patient sensations and exhibit significant inter- and intra-observer differences. We have developed a computer aided diagnostic (CAD) system for diabetic peripheral neuropathy. The thermal response of the feet of diabetic patients following cold stimulus is captured using an infrared camera. The plantar foot in the images from a thermal video are segmented and registered for tracking points or specific regions. The temperature recovery of each point on the plantar foot is extracted using our bio-thermal model and analyzed. The regions that exhibit abnormal ability to recover are automatically identified to aid the physicians to recognize problematic areas. The key to our CAD system is the segmentation of infrared video. The main challenges for segmenting infrared video compared to normal digital video are (1) as the foot warms up, it also warms up the surrounding, creating an ever changing contrast; and (2) there may be significant motion during imaging. To overcome this, a hybrid segmentation algorithm was developed based on a number of techniques such as continuous max-flow, model based segmentation, shape preservation, convex hull, and temperature normalization. Verifications of the automatic segmentation and registration using manual segmentation and markers show good agreement.

  9. From Phonomecanocardiography to Phonocardiography computer aided

    Science.gov (United States)

    Granados, J.; Tavera, F.; López, G.; Velázquez, J. M.; Hernández, R. T.; López, G. A.

    2017-01-01

    Due to lack of training doctors to identify many of the disorders in the heart by conventional listening, it is necessary to add an objective and methodological analysis to support this technique. In order to obtain information of the performance of the heart to be able to diagnose heart disease through a simple, cost-effective procedure by means of a data acquisition system, we have obtained Phonocardiograms (PCG), which are images of the sounds emitted by the heart. A program of acoustic, visual and artificial vision recognition was elaborated to interpret them. Based on the results of previous research of cardiologists a code of interpretation of PCG and associated diseases was elaborated. Also a site, within the university campus, of experimental sampling of cardiac data was created. Phonocardiography computer-aided is a viable and low cost procedure which provides additional medical information to make a diagnosis of complex heart diseases. We show some previous results.

  10. RASCAL: A Rudimentary Adaptive System for Computer-Aided Learning.

    Science.gov (United States)

    Stewart, John Christopher

    Both the background of computer-assisted instruction (CAI) systems in general and the requirements of a computer-aided learning system which would be a reasonable assistant to a teacher are discussed. RASCAL (Rudimentary Adaptive System for Computer-Aided Learning) is a first attempt at defining a CAI system which would individualize the learning…

  11. Computer-aided diagnosis in routine mammography

    International Nuclear Information System (INIS)

    Sittek, H.; Perlet, C.; Helmberger, R.; Linsmeier, E.; Kessler, M.; Reiser, M.

    1998-01-01

    Purpose: Computer-aided diagnosis in mammography is a topic many study groups have been concerned with since the first presentation of a system for computer-aided interpretation in 1967. Currently, there is only one system avilable for clinical use in mammography, the CAD-System Image Checker (R2 Technology). The purpose of our prospective study was to evaluate whether the integration of the CAD-system into the routine of a radiological breast diagnosis unit is feasible. Results: After the installation of the CAD-system, 300 patients with 1110 mammograms were included for evaluation in the present study. In 54 of these cases histological examination was indicated due to suspect criteria on conventional mammography. In 39 of 54 cases (72,2%) malignancy could be proven histologically. The CAD-system marked 82,1% of the histologically verified carcinomas correctly 94,3% of all 1797 marks made by the CAD-system indicated normal or benign structures. Routinely performed CAD analysis prolonged patients waiting time by about 15 min because the marks of the CAD system had to be interpreted in addition to the routine diagnostic investigations. Conclusion: Our experience with the use of the CAD-system in daily routine showed that CAD analysis can easily be integrated into a preexisting mammography unit. However, the diagnostic benefit is not yet clearly established. Since the rate of false negative marks by the CAD-system Image Checker is still high, the results of CAD analysis must be checked and corrected by an observer well experienced in mammography reading. (orig.) [de

  12. Intelligent Support for a Computer Aided Design Optimisation Cycle

    OpenAIRE

    B. Dolšak; M. Novak; J. Kaljun

    2006-01-01

    It is becoming more and more evident that  adding intelligence  to existing computer aids, such as computer aided design systems, can lead to significant improvements in the effective and reliable performance of various engineering tasks, including design optimisation. This paper presents three different intelligent modules to be applied within a computer aided design optimisation cycle to enable more intelligent and less experience-dependent design performance. 

  13. Computer-aided design for metabolic engineering.

    Science.gov (United States)

    Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

    2014-12-20

    The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Computer-Aided Video Differential Planimetry

    Science.gov (United States)

    Tobin, Michael; Djoleto, Ben D.

    1984-08-01

    THE VIDEO DIFFERENTIAL PLANIMETER (VDP)1 is a re-mote sensing instrument that can measure minute changes in the area of any object seen by an optical scanning system. The composite video waveforms obtained by scanning the object against a contrasting back-ground are amplified and shaped to yield a sequence of constant amplitude pulses whose polarity distinguishes the studied area from its background and whose varying widths reflect the dynamics of the viewed object. These pulses are passed through a relatively long time-constant capacitor-resistor circuit and are then fed into an integrator. The net integration voltage resulting from the most recent sequence of object-background time pulses is recorded and the integrator is returned to zero at the end of each video frame. If the object's area remains constant throughout the following frame, the integrator's summation will also remain constant. However, if the object's area varies, the positive and negative time pulses entering the integrator will change, and the integrator's summation will vary proportionately. The addition of a computer interface and a video recorder enhances the versatility and the resolving power of the VDP by permitting the repeated study and analysis of selected portions of the recorded data, thereby uncovering the major sources of the object's dynamics. Among the medical and biological procedures for which COMPUTER-AIDED VIDEO DIFFERENTIAL PLANIMETRY is suitable are Ophthalmoscopy, Endoscopy, Microscopy, Plethysmography, etc. A recent research study in Ophthalmoscopy2 will be cited to suggest a useful application of Video Differential Planimetry.

  15. Removal of Supernumerary Teeth Utilizing a Computer-Aided Design/Computer-Aided Manufacturing Surgical Guide.

    Science.gov (United States)

    Jo, Chanwoo; Bae, Doohwan; Choi, Byungho; Kim, Jihun

    2017-05-01

    Supernumerary teeth need to be removed because they can cause various complications. Caution is needed because their removal can cause damage to permanent teeth or tooth germs in the local vicinity. Surgical guides have recently been used in maxillofacial surgery. Because surgical guides are designed through preoperative analysis by computer-aided design software and fabricated using a 3-dimensional printer applying computer-aided manufacturing technology, they increase the accuracy and predictability of surgery. This report describes 2 cases of removal of a mesiodens-1 from a child and 1 from an adolescent-using a surgical guide; these would have been difficult to remove with conventional surgical methods. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  16. Level of Education, Sexual Promiscuity, and AIDS.

    Science.gov (United States)

    Krull, Catherine D.

    1994-01-01

    Responses of 595 unmarried persons on the 1991 General Social Survey suggest that educational attainment indirectly increases promiscuous sexual behavior by liberalizing sexual attitudes. In a second study, the incidence of AIDS was partly explained by educational attainment, liberal sexual attitudes, and promiscuous sexual practices. (KS)

  17. A computer aided tolerancing tool based on kinematic analogies

    NARCIS (Netherlands)

    Salomons, O.W.; Jonge poerink, H.J.; van Slooten, F.; van Slooten, F.; van Houten, Frederikus J.A.M.; Kals, H.J.J.

    1995-01-01

    A computer aided tolerancing tool is presented that assists the designer in functional tolerance specification. The theoretical concepts for subsequent tolerance analysis are also provided. The computer aided tolerancing tool is part of a feature based object oriented (re)-design support system,

  18. Computer-Aided Parallelizer and Optimizer

    Science.gov (United States)

    Jin, Haoqiang

    2011-01-01

    The Computer-Aided Parallelizer and Optimizer (CAPO) automates the insertion of compiler directives (see figure) to facilitate parallel processing on Shared Memory Parallel (SMP) machines. While CAPO currently is integrated seamlessly into CAPTools (developed at the University of Greenwich, now marketed as ParaWise), CAPO was independently developed at Ames Research Center as one of the components for the Legacy Code Modernization (LCM) project. The current version takes serial FORTRAN programs, performs interprocedural data dependence analysis, and generates OpenMP directives. Due to the widely supported OpenMP standard, the generated OpenMP codes have the potential to run on a wide range of SMP machines. CAPO relies on accurate interprocedural data dependence information currently provided by CAPTools. Compiler directives are generated through identification of parallel loops in the outermost level, construction of parallel regions around parallel loops and optimization of parallel regions, and insertion of directives with automatic identification of private, reduction, induction, and shared variables. Attempts also have been made to identify potential pipeline parallelism (implemented with point-to-point synchronization). Although directives are generated automatically, user interaction with the tool is still important for producing good parallel codes. A comprehensive graphical user interface is included for users to interact with the parallelization process.

  19. Intelligent computer-aided training and tutoring

    Science.gov (United States)

    Loftin, R. Bowen; Savely, Robert T.

    1991-01-01

    Specific autonomous training systems based on artificial intelligence technology for use by NASA astronauts, flight controllers, and ground-based support personnel that demonstrate an alternative to current training systems are described. In addition to these specific systems, the evolution of a general architecture for autonomous intelligent training systems that integrates many of the features of traditional training programs with artificial intelligence techniques is presented. These Intelligent Computer-Aided Training (ICAT) systems would provide, for the trainee, much of the same experience that could be gained from the best on-the-job training. By integrating domain expertise with a knowledge of appropriate training methods, an ICAT session should duplicate, as closely as possible, the trainee undergoing on-the-job training in the task environment, benefitting from the full attention of a task expert who is also an expert trainer. Thus, the philosophy of the ICAT system is to emulate the behavior of an experienced individual devoting his full time and attention to the training of a novice - proposing challenging training scenarios, monitoring and evaluating the actions of the trainee, providing meaningful comments in response to trainee errors, responding to trainee requests for information, giving hints (if appropriate), and remembering the strengths and weaknesses displayed by the trainee so that appropriate future exercises can be designed.

  20. Computer-aided psychological treatments: evolving issues.

    Science.gov (United States)

    Marks, Isaac; Cavanagh, Kate

    2009-01-01

    Evidence is growing that several computer-aided psychotherapy (CP) systems can effectively improve a range of common mental health problems. Most clients find CP acceptable because of its convenience, confidentiality, and reduction of stigma. CP can be accessed in a clinic, but recently clients have used CP especially on the Internet at home, with brief support on a telephone helpline and/or by email. Brief and efficient screening and support greatly reduce attrition. CP's efficacy, and encouragement of its dissemination and implementation by some national funding bodies and governmental agencies, has led to its spread as a regular care option and is increasing access to psychological therapies in some countries. Transfer of this new approach from use in tight research studies to use as an integrated part of everyday care under widely varying conditions generates teething problems that are being managed in diverse ways across different centers. Anonymized Internet audit of CP outcomes facilitates effective care and clinical governance. This review examines the current state of the art as well as the science and broad applications of CP.

  1. Computer aided information system for a PWR

    International Nuclear Information System (INIS)

    Vaidian, T.A.; Karmakar, G.; Rajagopal, R.; Shankar, V.; Patil, R.K.

    1994-01-01

    The computer aided information system (CAIS) is designed with a view to improve the performance of the operator. CAIS assists the plant operator in an advisory and support role, thereby reducing the workload level and potential human errors. The CAIS as explained here has been designed for a PWR type KLT- 40 used in Floating Nuclear Power Stations (FNPS). However the underlying philosophy evolved in designing the CAIS can be suitably adopted for other type of nuclear power plants too (BWR, PHWR). Operator information is divided into three broad categories: a) continuously available information b) automatically available information and c) on demand information. Two in number touch screens are provided on the main control panel. One is earmarked for continuously available information and the other is dedicated for automatically available information. Both the screens can be used at the operator's discretion for on-demand information. Automatically available information screen overrides the on-demand information screens. In addition to the above, CAIS has the features of event sequence recording, disturbance recording and information documentation. CAIS design ensures that the operator is not overburdened with excess and unnecessary information, but at the same time adequate and well formatted information is available. (author). 5 refs., 4 figs

  2. Computer aided systems human engineering: A hypermedia tool

    Science.gov (United States)

    Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

    1992-01-01

    The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

  3. Computer-aided assessment in statistics: the CAMPUS project

    Directory of Open Access Journals (Sweden)

    Neville Hunt

    1998-12-01

    Full Text Available The relentless drive for 'efficiency' in higher education, and the consequent increase in workloads, has given university teachers a compelling incentive to investigate alternative forms of assessment. Some forms of assessment with a clear educational value can no longer be entertained because of the burden placed on the teacher. An added concern is plagiarism, which anecdotal evidence would suggest is on the increase yet which is difficult to detect in large modules with more than one assessor. While computer-aided assessment (CAA has an enthusiastic following, it is not clear to many teachers that it either reduces workloads or reduces the risk of cheating. In an ideal world, most teachers would prefer to give individual attention and personal feedback to each student when marking their work. In this sense CAA must be seen as second best and will therefore be used only if it is seen to offer significant benefits in terms of reduced workloads or increased validity.

  4. Tablet computers versus optical aids to support education and learning in children and young people with low vision: protocol for a pilot randomised controlled trial, CREATE (Children Reading with Electronic Assistance To Educate).

    Science.gov (United States)

    Crossland, Michael D; Thomas, Rachel; Unwin, Hilary; Bharani, Seelam; Gothwal, Vijaya K; Quartilho, Ana; Bunce, Catey; Dahlmann-Noor, Annegret

    2017-06-21

    Low vision and blindness adversely affect education and independence of children and young people. New 'assistive' technologies such as tablet computers can display text in enlarged font, read text out to the user, allow speech input and conversion into typed text, offer document and spreadsheet processing and give access to wide sources of information such as the internet. Research on these devices in low vision has been limited to case series. We will carry out a pilot randomised controlled trial (RCT) to assess the feasibility of a full RCT of assistive technologies for children/young people with low vision. We will recruit 40 students age 10-18 years in India and the UK, whom we will randomise 1:1 into two parallel groups. The active intervention will be Apple iPads; the control arm will be the local standard low-vision aid care. Primary outcomes will be acceptance/usage, accessibility of the device and trial feasibility measures (time to recruit children, lost to follow-up). Exploratory outcomes will be validated measures of vision-related quality of life for children/young people as well as validated measures of reading and educational outcomes. In addition, we will carry out semistructured interviews with the participants and their teachers. NRES reference 15/NS/0068; dissemination is planned via healthcare and education sector conferences and publications, as well as via patient support organisations. NCT02798848; IRAS ID 179658, UCL reference 15/0570. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  5. Tablet computers versus optical aids to support education and learning in children and young people with low vision: protocol for a pilot randomised controlled trial, CREATE (Children Reading with Electronic Assistance To Educate)

    Science.gov (United States)

    Crossland, Michael D; Thomas, Rachel; Unwin, Hilary; Bharani, Seelam; Gothwal, Vijaya K; Quartilho, Ana; Bunce, Catey

    2017-01-01

    Introduction Low vision and blindness adversely affect education and independence of children and young people. New ‘assistive’ technologies such as tablet computers can display text in enlarged font, read text out to the user, allow speech input and conversion into typed text, offer document and spreadsheet processing and give access to wide sources of information such as the internet. Research on these devices in low vision has been limited to case series. Methods and analysis We will carry out a pilot randomised controlled trial (RCT) to assess the feasibility of a full RCT of assistive technologies for children/young people with low vision. We will recruit 40 students age 10–18 years in India and the UK, whom we will randomise 1:1 into two parallel groups. The active intervention will be Apple iPads; the control arm will be the local standard low-vision aid care. Primary outcomes will be acceptance/usage, accessibility of the device and trial feasibility measures (time to recruit children, lost to follow-up). Exploratory outcomes will be validated measures of vision-related quality of life for children/young people as well as validated measures of reading and educational outcomes. In addition, we will carry out semistructured interviews with the participants and their teachers. Ethics and dissemination NRES reference 15/NS/0068; dissemination is planned via healthcare and education sector conferences and publications, as well as via patient support organisations. Trial registration number NCT02798848; IRAS ID 179658, UCL reference 15/0570. PMID:28637740

  6. Fractography of clinically fractured, implant-supported dental computer-aided design and computer-aided manufacturing crowns

    NARCIS (Netherlands)

    Lohbauer, Ulrich; Belli, Renan; Cune, Marco S; Schepke, Ulf

    2017-01-01

    Today, a substantial part of the dental crown production uses computer-aided design and computer-aided manufacturing (CAD/CAM) technology. A recent step in restorative dentistry is the replacement of natural tooth structure with pre-polymerized and machined resin-based methacrylic polymers.

  7. Computer aided stress analysis of long bones utilizing computer tomography

    International Nuclear Information System (INIS)

    Marom, S.A.

    1986-01-01

    A computer aided analysis method, utilizing computed tomography (CT) has been developed, which together with a finite element program determines the stress-displacement pattern in a long bone section. The CT data file provides the geometry, the density and the material properties for the generated finite element model. A three-dimensional finite element model of a tibial shaft is automatically generated from the CT file by a pre-processing procedure for a finite element program. The developed pre-processor includes an edge detection algorithm which determines the boundaries of the reconstructed cross-sectional images of the scanned bone. A mesh generation procedure than automatically generates a three-dimensional mesh of a user-selected refinement. The elastic properties needed for the stress analysis are individually determined for each model element using the radiographic density (CT number) of each pixel with the elemental borders. The elastic modulus is determined from the CT radiographic density by using an empirical relationship from the literature. The generated finite element model, together with applied loads, determined from existing gait analysis and initial displacements, comprise a formatted input for the SAP IV finite element program. The output of this program, stresses and displacements at the model elements and nodes, are sorted and displayed by a developed post-processor to provide maximum and minimum values at selected locations in the model

  8. Evaluating Computer Aided Detection (CAD) Algorithms

    Science.gov (United States)

    Yoon, Hong Jun; Zheng, Bin; Sahiner, Berkman; Chakraborty, Dev P.

    2007-01-01

    Computer-aided detection (CAD) has been attracting extensive research interest during the last two decades. It is recognized that the full potential of CAD can only be realized by improving the performance and robustness of CAD algorithms and this requires good evaluation methodology that would permit CAD designers to optimize their algorithms. Free-response receiver operating characteristic (FROC) curves are widely used to assess CAD performance, however, evaluation rarely proceeds beyond determination of lesion localization fraction (sensitivity) at an arbitrarily selected value of non-lesion localizations (false marks) per image. This work describes an FROC curve fitting procedure that uses a recent model of visual search that serves as a framework for the free-response task. A maximum likelihood procedure for estimating the parameters of the model from free-response data and fitting CAD generated FROC curves was implemented. Procedures were implemented to estimate two figures of merit and associated statistics such as 95% confidence intervals and goodness of fit. One of the figures of merit does not require the arbitrary specification of an operating point at which to evaluate CAD performance. For comparison a related method termed initial detection and candidate analysis (IDCA) was also implemented that is applicable when all suspicious regions are known, no matter how low the degree of suspicion (or confidence level). The two methods were tested on seven mammography CAD data sets and both yielded good-excellent fits. The search model approach has the advantage that it can potentially be applied to radiologist generated free-response data where not all suspicious regions are reported, only the ones that are deemed sufficiently suspicious to warrant clinical follow-up. This work represents the first practical application of the search model to an important evaluation problem in diagnostic radiology. Software based on this work is expected to benefit CAD

  9. Computer-aided design development transition for IPAD environment

    Science.gov (United States)

    Owens, H. G.; Mock, W. D.; Mitchell, J. C.

    1980-01-01

    The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

  10. Computer-aided engineering in High Energy Physics

    International Nuclear Information System (INIS)

    Bachy, G.; Hauviller, C.; Messerli, R.; Mottier, M.

    1988-01-01

    Computing, standard tool for a long time in the High Energy Physics community, is being slowly introduced at CERN in the mechanical engineering field. The first major application was structural analysis followed by Computer-Aided Design (CAD). Development work is now progressing towards Computer-Aided Engineering around a powerful data base. This paper gives examples of the power of this approach applied to engineering for accelerators and detectors

  11. Danish aid to higher education

    DEFF Research Database (Denmark)

    Adriansen, Hanne Kirstine

    2016-01-01

    This piece comments on the role of higher education and universities in achieving the goals of Agenda 2030. It also asks if global academic collaboration is a new form of colonization or if researchers from the North can assist in decolonising the academy.......This piece comments on the role of higher education and universities in achieving the goals of Agenda 2030. It also asks if global academic collaboration is a new form of colonization or if researchers from the North can assist in decolonising the academy....

  12. Application of computer-aided designed/computer-aided manufactured techniques in reconstructing maxillofacial bony structures.

    Science.gov (United States)

    Rustemeyer, Jan; Busch, Alexander; Sari-Rieger, Aynur

    2014-12-01

    Today, virtually planned surgery and computer-aided designed/computer-aided manufactured (CAD/CAM) tools to reconstruct bony structures are being increasingly applied to maxillofacial surgery. However, the criteria for or against the usage of the CAD/CAM technique are disputable, since no evidence-based studies are available. Theoretically, the CAD/CAM technique should be applied to complex cases. In this case report, we present our experiences and discuss the criteria for application. Three cases are reported in which subjects received an osseous reconstruction using CAD/CAM techniques. In the first case, resection of the mandibular body and ramus was carried out, and reconstruction with a vascularised iliac bone transplant was performed. During surgery, a repositioning of the ipsilateral condyle was necessary. The second case comprised a wide mandibular reconstruction together with a repositioning of the condyles and the soft tissue chin using a two-segment osteomyocutaneous fibula flap. In the third case, a two-flap technique consisting of a double-barrelled osseous fibula flap and a radial forearm flap was applied to cover a wide palatine defect. Our experience suggests that the CAD/CAM technique provides an accurate and useful treatment not only in complex cases, but also in simpler ones, to achieve an anatomically correct shape of the bone transplant and to reposition adjacent structures.

  13. Advances in computer-aided design and computer-aided manufacture technology.

    Science.gov (United States)

    Calamia, J R

    1996-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: First, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities.

  14. Torsional strength of computer-aided design/computer-aided manufacturing-fabricated esthetic orthodontic brackets.

    Science.gov (United States)

    Alrejaye, Najla; Pober, Richard; Giordano Ii, Russell

    2017-01-01

    To fabricate orthodontic brackets from esthetic materials and determine their fracture resistance during archwire torsion. Computer-aided design/computer-aided manufacturing technology (Cerec inLab, Sirona) was used to mill brackets with a 0.018 × 0.025-inch slot. Materials used were Paradigm MZ100 and Lava Ultimate resin composite (3M ESPE), Mark II feldspathic porcelain (Vita Zahnfabrik), and In-Ceram YZ zirconia (Vita Zahnfabrik). Ten brackets of each material were subjected to torque by a 0.018 × 0.025-inch stainless steel archwire (G&H) using a specially designed apparatus. The average moments and degrees of torsion necessary to fracture the brackets were determined and compared with those of commercially available alumina brackets, Mystique MB (Dentsply GAC). The YZ brackets were statistically significantly stronger than any other tested material in their resistance to torsion (P 3467 g.mm for Mark II to 11,902 g.mm for YZ. The mean torsion angles at failure ranged from 15.3° to 40.9°. Zirconia had the highest torsional strength among the tested esthetic brackets. Resistance of MZ100 and Lava Ultimate composite resin brackets to archwire torsion was comparable to commercially available alumina ceramic brackets.

  15. Dutch aid to education and conflict

    NARCIS (Netherlands)

    Lopes Cardozo, M.T.A.; Novelli, M.

    2010-01-01

    This report focuses on developments in Dutch aid to education in conflict affected areas in the last decade, with a focus on the period 2007‐2010, when ex‐Minister for International Development, Koenders was in office. In this relatively brief time frame, Koenders prioritised development cooperation

  16. Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

    Science.gov (United States)

    Nan, Song

    2018-03-01

    Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

  17. Perceptual Computing Aiding People in Making Subjective Judgments

    CERN Document Server

    Mendel, Jerry

    2010-01-01

    Explains for the first time how "computing with words" can aid in making subjective judgments. Lotfi Zadeh, the father of fuzzy logic, coined the phrase "computing with words" (CWW) to describe a methodology in which the objects of computation are words and propositions drawn from a natural language. Perceptual Computing explains how to implement CWW to aid in the important area of making subjective judgments, using a methodology that leads to an interactive device—a "Perceptual Computer"—that propagates random and linguistic uncertainties into the subjective judg

  18. Development of a computer aided learning system for graphical ...

    African Journals Online (AJOL)

    We present the development and deployment process of a computer-aided learning tool which serves as a training aid for undergraduate control engineering courses. We show the process of aigorithm construction and implementation of the=software which is also aimed at teaching software development at undergraduate ...

  19. Planning Computer-Aided Distance Learning

    Directory of Open Access Journals (Sweden)

    Nadja Dobnik

    1996-12-01

    Full Text Available Didactics of autonomous learning changes under the influence of new technologies. Computer technology can cover all the functions that a teacher develops in personal contact with the learner. People organizing distance learning must realize all the possibilities offered by computers. Computers can take over and also combine the functions of many tools and systems, e. g. type­ writer, video, telephone. This the contents can be offered in form of classic media by means of text, speech, picture, etc. Computers take over data pro­cessing and function as study materials. Computer included in a computer network can also function as a medium for interactive communication.

  20. Computer Aided Design Tools for Extreme Environment Electronics, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This project aims to provide Computer Aided Design (CAD) tools for radiation-tolerant, wide-temperature-range digital, analog, mixed-signal, and radio-frequency...

  1. Computer-Aided Qualitative Data Analysis with Word

    Directory of Open Access Journals (Sweden)

    Bruno Nideröst

    2002-05-01

    Full Text Available Despite some fragmentary references in the literature about qualitative methods, it is fairly unknown that Word can be successfully used for computer-aided Qualitative Data Analyses (QDA. Based on several Word standard operations, elementary QDA functions such as sorting data, code-and-retrieve and frequency counts can be realized. Word is particularly interesting for those users who wish to have first experiences with computer-aided analysis before investing time and money in a specialized QDA Program. The well-known standard software could also be an option for those qualitative researchers who usually work with word processing but have certain reservations towards computer-aided analysis. The following article deals with the most important requirements and options of Word for computer-aided QDA. URN: urn:nbn:de:0114-fqs0202225

  2. DICOM standard in computer-aided medical technologies

    International Nuclear Information System (INIS)

    Plotnikov, A.V.; Prilutskij, D.A.; Selishchev, S.V.

    1997-01-01

    The paper outlines one of the promising standards to transmit images in medicine, in radiology in particular. the essence of the standard DICOM is disclosed and promises of its introduction into computer-aided medical technologies

  3. CART - a Scandinavian approach to computer aided radiation therapy

    International Nuclear Information System (INIS)

    Walstam, R.

    1987-01-01

    The CART project, a program of computer-aided radiation therapy developed as a joint venture by Scandinavian countries is described. The history is outlined and the individual areas of the CART program are listed. (L.O.). 3 refs

  4. Computer-aided discovery of antimicrobial agents as potential enoyl ...

    African Journals Online (AJOL)

    Computer-aided discovery of antimicrobial agents as potential enoyl acyl carrier protein reductase inhibitors. Mohammad A Ghattas, Nermin A Eissa, Sanaa K Bardaweel, Abdallah Abu Mellal, Noor Atatreh ...

  5. Computer-aided solvent screening for biocatalysis

    NARCIS (Netherlands)

    Abildskov, J.; Leeuwen, van M.B.; Boeriu, C.G.; Broek, van den L.A.M.

    2013-01-01

    A computer-aidedsolventscreening methodology is described and tested for biocatalytic systems composed of enzyme, essential water and substrates/products dissolved in a solvent medium, without cells. The methodology is computationally simple, using group contribution methods for calculating

  6. Computer-aided system for cryogenic research facilities

    International Nuclear Information System (INIS)

    Gerasimov, V.P.; Zhelamsky, M.V.; Mozin, I.V.; Repin, S.S.

    1994-01-01

    A computer-aided system is developed for the more effective choice and optimization of the design and manufacturing technologies of the superconductor for the magnet system of the International Thermonuclear Experimental Reactor (ITER) with the aim to ensure the superconductor certification. The computer-aided system provides acquisition, processing, storage and display of data describing the proceeding tests, the detection of any parameter deviations and their analysis. Besides, it generates commands for the equipment switch off in emergency situations. ((orig.))

  7. Computers in Education in Finland

    OpenAIRE

    Koivisto, Jari

    2014-01-01

    International audience; This chapter traces the history of computers in education in Finland from the early 1970s to today. It begins by noting that the history of computers in education in Finland began in the early 70s after many Finnish companies and universities acquired and made use of mainframe computers. Some of the university students who used computers in their studies afterwards became teachers and brought with them the idea of using computers in classroom education in Finnish schoo...

  8. Implementing HIV/AIDS education: impact of teachers' training on HIV/AIDS education in Bangladesh.

    Science.gov (United States)

    Sarma, Haribondhu; Oliveras, Elizabeth

    2013-03-01

    School-based HIV/AIDS education is a common and well-proven intervention strategy for providing information on HIV/AIDS to young people. However, lack of skills among teachers for imparting sensitive information to students can lead to programme failure in terms of achieving goals. A cross-sectional study was conducted among teachers to identify the factors that support or hinder their role in HIV/AIDS education. A self-administered questionnaire was used for interviewing teachers from randomly-selected schools in two adjacent districts in Bangladesh. Based on exposure to teachers' training, the districts were divided into control and intervention areas and the teachers' ability, skill, and their participation in HIV/AIDS education were compared between the districts. Trained teachers in the intervention schools were more likely to participate, less likely to face difficulties, and more likely to use interactive teaching methods in HIV/ AIDS classes compared to the controls who did not receive any training. Inadequate allocation of time for conducting the HIV/AIDS class was found to be barriers to HIV/AIDS education that suggest the need to provide teachers with more support in terms of training and logistics.

  9. [Preliminary evaluation of clinical effect of computer aided design and computer aided manufacture zirconia crown].

    Science.gov (United States)

    Wang, Yu-guang; Xing, Yan-xi; Sun, Yu-chun; Zhao, Yi-jiao; Lü, Pei-jun; Wang, Yong

    2013-06-01

    To evaluate clinical effects of computer aided design and computer aided manufacturing (CAD/CAM) milled zirconia crown in three aspects: aesthetic, contact wear and fracture. Sixty patients were divided into two groups.In one group, 35 full contour CAD/CAM zirconia crown were made on molars of 30 patients. The manufacturing process of zirconia crown was as follow. First, the three dimensional(3-D) data of working models, antagonist impression and check records were acquired by 3-D laser scanning Dental wings S50. Then full contour zirconia crowns, which had functional occlusal contacts with antagonistic teeth, and appropriate contact with adjacent teeth were designed with Zeno-CAD(V4.2.5.5.12919) software. ZENOSTAR Zr pure zirconia material was milled in digital controlled machine WIELAND 4030 M1.In the end, the zirconia crown were completed with the method of second sintering and polishing. After clinical try-in, the crown was cemented.In the control group, thirty gold alloy full crown were made and cemented on molars of 30 patients. According to the modified U S Public Health Service Criteria(USPHS) evaluation standard, all crowns were evaluated on the same day, at three months, half a year, one year and two years following delivery. There were three aspects we were focusing on in the evaluation: aesthetic, contact wear(restoration and antagonist), and fracture. In all the prosthesis we evaluated during the 24 months, no fracture was found. Contact wear of crowns varies according to different antagonist teeth. The zirconia crowns show privilege in aesthesis, toughness and anti-wearing.However, there is contact wear on antagonistic natural teeth. Thus it is a good choice when full zirconia crowns are indicated on two antagonistic teeth in both jaws.

  10. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication

    Science.gov (United States)

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  11. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

    Science.gov (United States)

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now.

  12. Integrating HIV&AIDS education in pre-service Mathematics ...

    African Journals Online (AJOL)

    Drawing on self-study, the work of a Mathematics teacher educator who worked with pre-service teachers to integrate HIV & AIDS education at a higher education institution is described. By considering integration of HIV & AIDS education in Mathematics Education and taking action it is possible to develop strategies which ...

  13. International Conference on Computers and Advanced Technology in Education

    CERN Document Server

    Advanced Information Technology in Education

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computers and Advanced Technology in Education. With the development of computers and advanced technology, the human social activities are changing basically. Education, especially the education reforms in different countries, has been experiencing the great help from the computers and advanced technology. Generally speaking, education is a field which needs more information, while the computers, advanced technology and internet are a good information provider. Also, with the aid of the computer and advanced technology, persons can make the education an effective combination. Therefore, computers and advanced technology should be regarded as an important media in the modern education. Volume Advanced Information Technology in Education is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of computers and advanced technology in education to d...

  14. The Journal of Computer- Aided Molecular Design: a bibliometric note

    Science.gov (United States)

    Willett, Peter

    2012-01-01

    Summarizes the articles in, and the citations to, volumes 2-24 of the Journal of Computer- Aided Molecular Design. The citations to the journal come from almost 2000 different sources that span a very wide range of academic subjects, with the most heavily cited articles being descriptions of software systems and of computational methods.

  15. Computer-aided Teaching of Math in Electromechanics Vocational Course

    Directory of Open Access Journals (Sweden)

    Eduardo Shigueo Hoji

    2013-03-01

    Full Text Available This paper describes the experience of teaching mathematics in the electromechanics vocational course with aid of the computer. Instead of giving a bunch of equations and a calculator to the students, as it is usual in vocational courses, we offer them Octave, which is a numerical computational tool. Furthermore, the mathematical concepts involved in the solution of applied problems are provided within a multidisciplinary framework. The proposed approach helped to reduce the abstraction of mathematics for the students. Despite the deficiencies the students in vocational courses have in their formation, we could notice that their perception regarding mathematics has changed after figuring out that “a bunch of numbers” can be useful in the solution of problems they shall face in their professional life. The approach was applied to three groups already. All of them are composed of mature students, who passed by a flawed basic educational system and stayed away from school for a long time.

  16. National Educational Computing Conference '87.

    Science.gov (United States)

    Journal of Computers in Mathematics and Science Teaching, 1988

    1988-01-01

    Includes the abstracts of seven of the 191 papers presented at a recent educational computing conference. Topics include computer-based tutoring, computer-assisted instruction with low achieving students, education-industry collaboration, hypothesis testing, Western Carolina University MicroNet, the New Jersey Science Supervisors Electronic…

  17. Computer graphics aid mission operations. [NASA missions

    Science.gov (United States)

    Jeletic, James F.

    1990-01-01

    The application of computer graphics techniques in NASA space missions is reviewed. Telemetric monitoring of the Space Shuttle and its components is discussed, noting the use of computer graphics for real-time visualization problems in the retrieval and repair of the Solar Maximum Mission. The use of the world map display for determining a spacecraft's location above the earth and the problem of verifying the relative position and orientation of spacecraft to celestial bodies are examined. The Flight Dynamics/STS Three-dimensional Monitoring System and the Trajectroy Computations and Orbital Products System world map display are described, emphasizing Space Shuttle applications. Also, consideration is given to the development of monitoring systems such as the Shuttle Payloads Mission Monitoring System and the Attitude Heads-Up Display and the use of the NASA-Goddard Two-dimensional Graphics Monitoring System during Shuttle missions and to support the Hubble Space Telescope.

  18. Mobile computing initiatives within pharmacy education.

    Science.gov (United States)

    Cain, Jeff; Bird, Eleanora R; Jones, Mikael

    2008-08-15

    To identify mobile computing initiatives within pharmacy education, including how devices are obtained, supported, and utilized within the curriculum. An 18-item questionnaire was developed and delivered to academic affairs deans (or closest equivalent) of 98 colleges and schools of pharmacy. Fifty-four colleges and schools completed the questionnaire for a 55% completion rate. Thirteen of those schools have implemented mobile computing requirements for students. Twenty schools reported they were likely to formally consider implementing a mobile computing initiative within 5 years. Numerous models of mobile computing initiatives exist in terms of device obtainment, technical support, infrastructure, and utilization within the curriculum. Responders identified flexibility in teaching and learning as the most positive aspect of the initiatives and computer-aided distraction as the most negative, Numerous factors should be taken into consideration when deciding if and how a mobile computing requirement should be implemented.

  19. Gathering Empirical Evidence Concerning Links between Computer Aided Design (CAD) and Creativity

    Science.gov (United States)

    Musta'amal, Aede Hatib; Norman, Eddie; Hodgson, Tony

    2009-01-01

    Discussion is often reported concerning potential links between computer-aided designing and creativity, but there is a lack of systematic enquiry to gather empirical evidence concerning such links. This paper reports an indication of findings from other research studies carried out in contexts beyond general education that have sought evidence…

  20. Computer-aided diagnosis in chest radiography

    NARCIS (Netherlands)

    Ginneken, B. van

    2001-01-01

    Chest radiographs account for more than half of all radiological examinations; the chest is the “mirror of health and disease”. This thesis is about techniques for computer analysis of chest radiographs. It describes methods for texture analysis and segmenting the lung fields and rib cage in a

  1. Computer Aided Layout Programs. A Contemporary Appraisal,

    Science.gov (United States)

    1982-01-01

    Hale [4], Ritzman [15], Hitchings and Cottam [8], and Scriabin and Vergin [16]. Unfortunately, all of these studies dealt with the quadratic assignment...Algorithms for Plant Loca’tion," Management Science, Vol. 18, pp. 240-248, 1972. [16] Scriabin , M., and R. C. Vergin, "Comparison of Computer Algorithms and

  2. COMPUTER AIDED SELECTION OF PLANT LAYOUT

    African Journals Online (AJOL)

    This paper deals with the fundamental concepts of plant layout, in which the need for plant layout, the systematic and logical approaches to the problems, layout solutions and the objectives of plant layout are discussed. Further the approaches and the scoring techniques of the two available computer rout ines are ...

  3. State of Student Aid and Higher Education in Texas

    Science.gov (United States)

    Creusere, Marlena; Fletcher, Carla; Klepfer, Kasey; Norman, Patricia

    2015-01-01

    TG provides critical support to schools, students, and borrowers at every stage of the federal student aid process--from providing information on how to pay for a higher education including financial aid options, to facilitating successful loan repayment after graduation. This issue of "State of Student Aid and Higher Education in Texas"…

  4. Computer-Aided Modeling of Lipid Processing Technology

    DEFF Research Database (Denmark)

    Diaz Tovar, Carlos Axel

    2011-01-01

    increase along with growing interest in biofuels, the oleochemical industry faces in the upcoming years major challenges in terms of design and development of better products and more sustainable processes to make them. Computer-aided methods and tools for process synthesis, modeling and simulation...... are widely used for design, analysis, and optimization of processes in the chemical and petrochemical industries. These computer-aided tools have helped the chemical industry to evolve beyond commodities toward specialty chemicals and ‘consumer oriented chemicals based products’. Unfortunately...... to develop systematic computer-aided methods (property models) and tools (database) related to the prediction of the necessary physical properties suitable for design and analysis of processes employing lipid technologies. The methods and tools include: the development of a lipid-database (CAPEC...

  5. Computer aided radiation analysis for manned spacecraft

    Science.gov (United States)

    Appleby, Matthew H.; Griffin, Brand N.; Tanner, Ernest R., II; Pogue, William R.; Golightly, Michael J.

    1991-01-01

    In order to assist in the design of radiation shielding an analytical tool is presented that can be employed in combination with CAD facilities and NASA transport codes. The nature of radiation in space is described, and the operational requirements for protection are listed as background information for the use of the technique. The method is based on the Boeing radiation exposure model (BREM) for combining NASA radiation transport codes and CAD facilities, and the output is given as contour maps of the radiation-shield distribution so that dangerous areas can be identified. Computational models are used to solve the 1D Boltzmann transport equation and determine the shielding needs for the worst-case scenario. BREM can be employed directly with the radiation computations to assess radiation protection during all phases of design which saves time and ultimately spacecraft weight.

  6. PCACE-Personal-Computer-Aided Cabling Engineering

    Science.gov (United States)

    Billitti, Joseph W.

    1987-01-01

    PCACE computer program developed to provide inexpensive, interactive system for learning and using engineering approach to interconnection systems. Basically database system that stores information as files of individual connectors and handles wiring information in circuit groups stored as records. Directly emulates typical manual engineering methods of handling data, thus making interface between user and program very natural. Apple version written in P-Code Pascal and IBM PC version of PCACE written in TURBO Pascal 3.0

  7. Computer aided analysis of reactor containment building

    International Nuclear Information System (INIS)

    Abhat, O.B.

    1985-01-01

    The paper presents a computerized, structural analysis of the Reactor Containment Building (RCB) of a liquid metal nuclear power plant. Emphasis is placed on developing techniques for large 3-Dimensional, structural models using interactive computer graphics, analyzing the structure by NASTRAN and a simplified analytical approach to account for non-linear, temperature-dependent, material properties at elevated temperatures caused by a sodium spill from a Design Basis Accident (DBA). (orig.)

  8. Computer Aided Implementation using Xilinx System Generator

    OpenAIRE

    Eriksson, Henrik

    2004-01-01

    The development in electronics increases the demand for good design methods and design tools in the field of electrical engeneering. To improve their design methods Ericsson Microwave Systems AB is interested in using computer tools to create a link between the specification and the implementation of a digital system in a FPGA. Xilinx System Generator for DSP is a tool for implementing a model of a digital signalprocessing algorithm in a Xilinx FPGA. To evaluate Xilinx System Generator two t...

  9. Performative Computation-aided Design Optimization

    Directory of Open Access Journals (Sweden)

    Ming Tang

    2012-12-01

    Full Text Available This article discusses a collaborative research and teaching project between the University of Cincinnati, Perkins+Will’s Tech Lab, and the University of North Carolina Greensboro. The primary investigation focuses on the simulation, optimization, and generation of architectural designs using performance-based computational design approaches. The projects examine various design methods, including relationships between building form, performance and the use of proprietary software tools for parametric design.

  10. Computer-Aided dispatching system design specification

    International Nuclear Information System (INIS)

    Briggs, M.G.

    1996-01-01

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This system is defined as a Commercial-Off the-Shelf computer dispatching system providing both text and graphical display information while interfacing with the diverse reporting system within the Hanford Facility. This system also provided expansion capabilities to integrate Hanford Fire and the Occurrence Notification Center and provides back-up capabilities for the Plutonium Processing Facility

  11. Computer-aided protective system (CAPS)

    International Nuclear Information System (INIS)

    Squire, R.K.

    1988-01-01

    A method of improving the security of materials in transit is described. The system provides a continuously monitored position location system for the transport vehicle, an internal computer-based geographic delimiter that makes continuous comparisons of actual positions with the preplanned routing and schedule, and a tamper detection/reaction system. The position comparison is utilized to institute preprogrammed reactive measures if the carrier is taken off course or schedule, penetrated, or otherwise interfered with. The geographic locater could be an independent internal platform or an external signal-dependent system utilizing GPS, Loran or similar source of geographic information; a small (micro) computer could provide adequate memory and computational capacity; the insurance of integrity of the system indicates the need for a tamper-proof container and built-in intrusion sensors. A variant of the system could provide real-time transmission of the vehicle position and condition to a central control point for; such transmission could be encrypted to preclude spoofing

  12. Computer-aided diagnosis in chest radiology.

    Science.gov (United States)

    MacMahon, H; Doi, K; Chan, H P; Giger, M L; Katsuragawa, S; Nakamori, N

    1990-01-01

    Digital radiography offers several important advantages over conventional systems, including abilities for image manipulation, transmission, and storage. In the long term, however, the unique ability to apply artificial intelligence techniques for automated detection and quantitation of disease may have an even greater impact on radiologic practice. Although CAD is still in its infancy, the results of several recent studies clearly indicate a major potential for the future. The concept of using computers to analyze medical images is not new, but recent advances in computer technology together with progress in implementing practical digital radiography systems have stimulated research efforts in this exciting field. Several facets of CAD are presently being developed at the University of Chicago and elsewhere for application in chest radiology as well as in mammography and vascular imaging. To date, investigators have focused on a limited number of subjects that have been, by their nature, particularly suitable for computer analysis. There is no aspect of radiologic diagnosis that could not potentially benefit from this approach, however. The ultimate goal of these endeavors is to provide a system for comprehensive automated image analysis, the results of which could be accepted or modified at the discretion of the radiologist.

  13. Computer Literacy Education

    Science.gov (United States)

    1989-01-01

    curricula, systems must reorder their priorities.ඇ One question for computer-literacy advocates is this: What is computer literacy more important...Context." AEDS Journal, 17, 3 (Spring 1984) 1-13. "Reader’s Survey Results: What Is Computer Literacy?" Classroom Computer Learning (March 1986) p. 53...Acquisition of Computer Literacy." Journal of Computer-Based Information, 12, 1 (Winter 1985) 12-16. "\\ What is Computer Literacy?" Article 10c in Cannings

  14. The Role of Computer-Aided Instruction in Science Courses and the Relevant Misconceptions of Pre-Service Teachers

    Science.gov (United States)

    Aksakalli, Ayhan; Turgut, Umit; Salar, Riza

    2016-01-01

    This research aims to investigate the ways in which pre-service physics teachers interact with computers, which, as an indispensable means of today's technology, are of major value in education and training, and to identify any misconceptions said teachers may have about computer-aided instruction. As part of the study, computer-based physics…

  15. Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology

    Science.gov (United States)

    Hyde, Patricia R.; Loftin, R. Bowen

    1993-01-01

    The volume 2 proceedings from the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology are presented. Topics discussed include intelligent computer assisted training (ICAT) systems architectures, ICAT educational and medical applications, virtual environment (VE) training and assessment, human factors engineering and VE, ICAT theory and natural language processing, ICAT military applications, VE engineering applications, ICAT knowledge acquisition processes and applications, and ICAT aerospace applications.

  16. CAHECA: computer aided hepatocellular carcinoma therapy planning.

    Science.gov (United States)

    Adeshina, A M; Hashim, R; Khalid, N E A

    2014-09-01

    Hepatocellular Carcinoma is the most common type of liver cancer having a strong relation with cirrhosis. Undoubtedly, cirrhosis may be caused by the virus infection of hepatitis B (HBV) and hepatitis C (HBC) or through alchoholism. However, even when cirrhosis has not been developed, patients with hepatitis viral infections are still at the risk of liver cancer. Apparently, among the numerous medical imaging techniques, Computed Tomography (CT) is the best in defining liver tumor borders. Unfortunately, these imaging techniques, including the CT procedures, usually rely on an appended application to reconstruct the generated 2-D slices to 3-D model. This may involve high performance computation, may be time-consuming or costly. Moreover, even with the outstanding performances of CT in defining the liver tumor boundaries, contrast between tumor tissues and the surrounding liver parenchyma is too low in CT slices. With such a close proxity in the tumor and the surrounding liver tissues, accurate characterization of liver tumor is a challenge. Previously, algorithms were developed to reveal abnormalities in brain's MRI datasets and CT abdominal pelvic, however, introducing a framework that could accurately characterize liver tumor and its surrounding tissues in CT datasets would go a long way in contributing to medical diagnosis and therapy planning of Hepatocellular Carcinoma. This paper proposes an Hepatocellular Carcinoma framework by extending the functionalities of SurLens Visualization System with an automatic liver tumor localization technique using Compute Unified Device Architecture (CUDA). The study was evaluated with liver CT datasets from the Imaging Science and Information Systems (ISIS) Center, the Georgetown University Medical Center. Significantly, visualization of liver CT datasets and the localization of the entangled tumor was achieved without prior datasets segmentation. Interestingly, the framework achieved remarkably good processing speed at a

  17. Computer Aided Facial Prosthetics Manufacturing System

    Directory of Open Access Journals (Sweden)

    Peng H.K.

    2016-01-01

    Full Text Available Facial deformities can impose burden to the patient. There are many solutions for facial deformities such as plastic surgery and facial prosthetics. However, current fabrication method of facial prosthetics is high-cost and time consuming. This study aimed to identify a new method to construct a customized facial prosthetic. A 3D scanner, computer software and 3D printer were used in this study. Results showed that the new developed method can be used to produce a customized facial prosthetics. The advantages of the developed method over the conventional process are low cost, reduce waste of material and pollution in order to meet the green concept.

  18. Memory interface simulator: A computer design aid

    Science.gov (United States)

    Taylor, D. S.; Williams, T.; Weatherbee, J. E.

    1972-01-01

    Results are presented of a study conducted with a digital simulation model being used in the design of the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. The model simulates the activity involved as instructions are fetched from random access memory for execution in one of the system central processing units. A series of model runs measured instruction execution time under various assumptions pertaining to the CPU's and the interface between the CPU's and RAM. Design tradeoffs are presented in the following areas: Bus widths, CPU microprogram read only memory cycle time, multiple instruction fetch, and instruction mix.

  19. Space systems computer-aided design technology

    Science.gov (United States)

    Garrett, L. B.

    1984-01-01

    The interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system is described, together with planned capability increases in the IDEAS system. The system's disciplines consist of interactive graphics and interactive computing. A single user at an interactive terminal can create, design, analyze, and conduct parametric studies of earth-orbiting satellites, which represents a timely and cost-effective method during the conceptual design phase where various missions and spacecraft options require evaluation. Spacecraft concepts evaluated include microwave radiometer satellites, communication satellite systems, solar-powered lasers, power platforms, and orbiting space stations.

  20. Computer-aided Fault Tree Analysis

    International Nuclear Information System (INIS)

    Willie, R.R.

    1978-08-01

    A computer-oriented methodology for deriving minimal cut and path set families associated with arbitrary fault trees is discussed first. Then the use of the Fault Tree Analysis Program (FTAP), an extensive FORTRAN computer package that implements the methodology is described. An input fault tree to FTAP may specify the system state as any logical function of subsystem or component state variables or complements of these variables. When fault tree logical relations involve complements of state variables, the analyst may instruct FTAP to produce a family of prime implicants, a generalization of the minimal cut set concept. FTAP can also identify certain subsystems associated with the tree as system modules and provide a collection of minimal cut set families that essentially expresses the state of the system as a function of these module state variables. Another FTAP feature allows a subfamily to be obtained when the family of minimal cut sets or prime implicants is too large to be found in its entirety; this subfamily consists only of sets that are interesting to the analyst in a special sense

  1. The NASA computer aided design and test system

    Science.gov (United States)

    Gould, J. M.; Juergensen, K.

    1973-01-01

    A family of computer programs facilitating the design, layout, evaluation, and testing of digital electronic circuitry is described. CADAT (computer aided design and test system) is intended for use by NASA and its contractors and is aimed predominantly at providing cost effective microelectronic subsystems based on custom designed metal oxide semiconductor (MOS) large scale integrated circuits (LSIC's). CADAT software can be easily adopted by installations with a wide variety of computer hardware configurations. Its structure permits ease of update to more powerful component programs and to newly emerging LSIC technologies. The components of the CADAT system are described stressing the interaction of programs rather than detail of coding or algorithms. The CADAT system provides computer aids to derive and document the design intent, includes powerful automatic layout software, permits detailed geometry checks and performance simulation based on mask data, and furnishes test pattern sequences for hardware testing.

  2. Single photon emission computed tomography in AIDS dementia complex

    International Nuclear Information System (INIS)

    Pohl, P.; Vogl, G.; Fill, H.; Roessler, H.Z.; Zangerle, R.; Gerstenbrand, F.

    1988-01-01

    Single photon emission computed tomography (SPECT) studies were performed in AIDS dementia complex using IMP in 12 patients (and HM-PAO in four of these same patients). In all patients, SPECT revealed either multiple or focal uptake defects, the latter corresponding with focal signs or symptoms in all but one case. Computerized tomography showed a diffuse cerebral atrophy in eight of 12 patients, magnetic resonance imaging exhibited changes like atrophy and/or leukoencephalopathy in two of five cases. Our data indicate that both disturbance of cerebral amine metabolism and alteration of local perfusion share in the pathogenesis of AIDS dementia complex. SPECT is an important aid in the diagnosis of AIDS dementia complex and contributes to the understanding of the pathophysiological mechanisms of this disorder

  3. Fracture resistance of computer-aided design/computer-aided manufacturing-generated composite resin-based molar crowns

    OpenAIRE

    Harada, A; Nakamura, Keisuke; Kanno, Taro; Inagaki, R.; Ørtengren, Ulf Thore; Niwano, Y.; Sasaki, Keiichi; Egusa, Hiroshi

    2015-01-01

    Accepted manuscript version.Published version available at http://doi.org/10.1111/eos.12173 The aim of this study was to investigate whether different fabrication processes, such as the computer-aided design/computer-aided manufacturing (CAD/CAM) system or the manual build-up technique, affect the fracture resistance of composite resin-based crowns. Lava Ultimate (LU), Estenia C&B (EC&B), and lithium disilicate glass-ceramic IPS e.max press (EMP) were used. Four types of molar ...

  4. Database organization for computer-aided characterization of laser diode

    International Nuclear Information System (INIS)

    Oyedokun, Z.O.

    1988-01-01

    Computer-aided data logging involves a huge amount of data which must be properly managed for optimized storage space, easy access, retrieval and utilization. An organization method is developed to enhance the advantages of computer-based data logging of the testing of the semiconductor injection laser which optimize storage space, permit authorized user easy access and inhibits penetration. This method is based on unique file identification protocol tree structure and command file-oriented access procedures

  5. Computer-aided surgery of the paranasal sinuses and skull base.

    Science.gov (United States)

    Wise, Sarah K; DelGaudio, John M

    2005-07-01

    Endoscopic sinus surgery is one of the most common surgical procedures in otolaryngology. However, the location of the orbit and intracranial contents in close proximity to the paranasal sinuses makes endoscopic sinus surgery potentially hazardous. Otolaryngologists have employed computer-aided surgery, or image-guided surgery, over the past two decades to enhance surgeon confidence, allow more thorough surgical dissections and possibly reduce the complication rate of endoscopic sinus surgery. Computer-aided surgery utilizes preoperative imaging to provide real-time localization of surgical instruments in the surgical field. Although computer-aided surgery originated in the neurosurgical realm, otolaryngologists soon appreciated that this technology could assist in identifying critical orbital or intracranial structures surrounding the paranasal sinuses, and potentially aid in decreasing complications. In this article, the history of image-guidance systems and their application to surgery of the paranasal sinuses and skull base will be reviewed. The components of computer-aided surgery systems and the currently available technologies for surgical instrument tracking are discussed, as well as the advantages and disadvantages of each of the tracking technologies. In addition, issues relating to the accuracy of image-guidance systems are examined. A number of institutional series noting surgeon experience with computer-aided surgery in the domain of paranasal sinus surgery are reviewed. Furthermore, the authors evaluate the utility of image-guidance technology beyond the paranasal sinuses and skull base, such as its use in surgery of the pituitary gland and pterygopalatine fossa, research and resident education. Finally, potential future applications of computer-aided surgery technology are discussed.

  6. Computer aided operation of complex systems

    International Nuclear Information System (INIS)

    Goodstein, L.P.

    1985-09-01

    Advanced technology is having the effect that industrial systems are becoming more highly automated and do not rely on human intervention for the control of normally planned and/or predicted situations. Thus the importance of the operator has shifted from being a manual controller to becoming more of a systems manager and supervisory controller. At the same time, the use of advanced information technology in the control room and its potential impact on human-machine capabilities places additional demands on the designer. This report deals with work carried out to describe the plant-operator relationship in order to systematize the design and evaluation of suitable information systems in the control room. This design process starts with the control requirements from the plant and transforms them into corresponding sets of decision-making tasks with appropriate allocation of responsibilities between computer and operator. To further effectivize this cooperation, appropriate information display and accession are identified. The conceptual work has been supported by experimental studies on a small-scale simulator. (author)

  7. HINT for Squint: A Computer Reliant Diagnostic Aid for Strabismus

    OpenAIRE

    Gieszl, Louis R.; Morris, Jacqueline; Guyton, David L.

    1983-01-01

    This paper provides an outline of methods used for the implementation of a computer reliant diagnostic aid in the medical specialty of Ophthalmology. Some problems have been associated with many previous diagnostic models. A careful review indicates that the most serious problems were:

  8. Caesy: A software tool for computer-aided engineering

    Science.gov (United States)

    Wette, Matt

    1993-01-01

    A new software tool, Caesy, is described. This tool provides a strongly typed programming environment for research in the development of algorithms and software for computer-aided control system design. A description of the user language and its implementation as they currently stand are presented along with a description of work in progress and areas of future work.

  9. Critiquing the Computer-Aided Design of Dental Prostheses.

    Science.gov (United States)

    Fitzpatrick, F. J.; And Others

    This paper describes RaPiD, a computer-aided assistant for the design of dental prostheses called removable partial dentures. The user manipulates icons directly to indicate the desired design solution to a given clinical situation. A developing design is represented as a logic database of components in a design; expert rules are applied as…

  10. Assisted supervision of a computer aided tele-operation system

    Energy Technology Data Exchange (ETDEWEB)

    Le Bars, H.; Gravez, P.; Fournier, R.

    1994-12-31

    This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs.

  11. Interval change analysis to improve computer aided detection in mammography.

    NARCIS (Netherlands)

    Timp, S.; Karssemeijer, N.

    2006-01-01

    We are developing computer aided diagnosis (CAD) techniques to study interval changes between two consecutive mammographic screening rounds. We have previously developed methods for the detection of malignant masses based on features extracted from single mammographic views. The goal of the present

  12. A computer aided tolerancing tool, II: tolerance analysis

    NARCIS (Netherlands)

    Salomons, O.W.; Haalboom, F.J.; Jonge poerink, H.J.; van Slooten, F.; van Slooten, F.; van Houten, Frederikus J.A.M.; Kals, H.J.J.

    1996-01-01

    A computer aided tolerance analysis tool is presented that assists the designer in evaluating worst case quality of assembly after tolerances have been specified. In tolerance analysis calculations, sets of equations are generated. The number of equations can be restricted by using a minimum number

  13. Computer-Aided Multiscale Modelling for Chemical Process Engineering

    DEFF Research Database (Denmark)

    Morales Rodriguez, Ricardo; Gani, Rafiqul

    2007-01-01

    Chemical processes are generally modeled through monoscale approaches, which, while not adequate, satisfy a useful role in product-process design. In this case, use of a multi-dimensional and multi-scale model-based approach has importance in product-process development. A computer-aided framewor...

  14. Development and Evaluation of a Computer-Aided Learning (CAL ...

    African Journals Online (AJOL)

    Against this background, this paper was aimed at teaching students the fundamentals of C++ programming language in higher institutions in Nigeria using Computer Aided Learning software system (CAL) developed for C++, which is a course being taught at the 2nd year, 3rd year and 4th year to students of Engineering ...

  15. Assisted supervision of a computer aided tele-operation system

    International Nuclear Information System (INIS)

    Le Bars, H.; Gravez, P.; Fournier, R.

    1994-01-01

    This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs

  16. Preparing Students for Computer Aided Drafting (CAD). A Conceptual Approach.

    Science.gov (United States)

    Putnam, A. R.; Duelm, Brian

    This presentation outlines guidelines for developing and implementing an introductory course in computer-aided drafting (CAD) that is geared toward secondary-level students. The first section of the paper, which deals with content identification and selection, includes lists of mechanical drawing and CAD competencies and a list of rationales for…

  17. Medical students and AIDS: knowledge, attitudes and implications for education.

    Science.gov (United States)

    Kopacz, D R; Grossman, L S; Klamen, D L

    1999-02-01

    Second year medical students at a large midwestern university were surveyed about their attitudes regarding AIDS. Results indicated: (1) students with homosexual and/or HIV-positive friends were significantly more tolerant toward AIDS patients, (2) over half the students believed that treating AIDS patients may be hazardous and that their education had not prepared them to treat these patients safely, (3) one-third believed they had the right to refuse to treat AIDS patients, and (4) AIDS-phobia was significantly associated with homophobia. These data suggest that medical educators may need to help students overcome AIDS-phobia before some students will be able to incorporate instruction about AIDS since AIDS-phobia may inhibit this learning. Didactic instruction must be coupled with modeling by educators of non-prejudicial attitudes and strict adherence to medical professionalism.

  18. Computers in Public Education Study.

    Science.gov (United States)

    HBJ Enterprises, Highland Park, NJ.

    This survey conducted for the National Institute of Education reports the use of computers in U.S. public schools in the areas of instructional computing, student accounting, management of educational resources, research, guidance, testing, and library applications. From a stratified random sample of 1800 schools in varying geographic areas and…

  19. Possible Computer Vision Systems and Automated or Computer-Aided Edging and Trimming

    Science.gov (United States)

    Philip A. Araman

    1990-01-01

    This paper discusses research which is underway to help our industry reduce costs, increase product volume and value recovery, and market more accurately graded and described products. The research is part of a team effort to help the hardwood sawmill industry automate with computer vision systems, and computer-aided or computer controlled processing. This paper...

  20. An overview of interactive computer graphics and its application to computer-aided engineering and design

    International Nuclear Information System (INIS)

    Van Dam, A.

    1983-01-01

    The purpose of this brief birds-eye view of interactive graphics is to list the key ideas, and to show how one of the most important application areas, Computer Aided Engineering/Design takes advantage of it. (orig.)

  1. Computer-aided design systems (CADS) for power units

    International Nuclear Information System (INIS)

    Rozov, S.S.

    1989-01-01

    Main functions and peculiarities of the computer-aided design system (CADS) used in NPP power unit design are considered. The to-day CADS are based on the developed computer complexes (for example, 2VAX type computers with up to 100 M byte immediate ecess memory and with few tens of terminals). Efficiency of such CADS constitutes 3000-5000 drawings a month. CADS includes all the design steps, beginning from the preliminary project up to economical justification. Selection of the plant type, its site, justification of safety, reliability and economical efficiency of some subsystems under normal and emergency conditions are included there

  2. Educating Women about HIV/AIDS: Some International Comparisons

    Science.gov (United States)

    Bulman, Donna; Coben, Diana; Nguyen, Van Anh

    2004-01-01

    This paper describes current trends in the HIV/AIDS epidemic. It looks at issues and strategies involved in educating women about HIV/AIDS in the context of the global pandemic, focusing particularly on Canada and Vietnam. These strategies are essential steps in preventing the spread of HIV and in caring for those who have already developed AIDS.…

  3. Wavelets for computer-aided breast cancer diagnosis

    Science.gov (United States)

    Myers, Lemuel R., Jr.; Kocur, Catherine M.; Rogers, Steven K.; Eisenbies, Chris; Hoffmeister, Jeffrey W.

    1995-04-01

    More than 50 million women over the age of 40 are currently at risk for breast cancer in the United States. Computer-aided diagnosis, used as a `second opinion' to radiologists, will aid in decreasing the number of false readings of mammograms. A novel feature extraction method is presented that provides increased classification power. Wavelets, previously only exploited for their segmentation benefits, are explored as features for classification. Daubechies4, Daubechies20, and biorthogonal wavelets are each investigated. Applied to 94 difficult-to- diagnose digitized microcalcification cases, performance is 74 percent correct classifications. Feature selection techniques are presented which further improve wavelet classification performance to 88 percent correct classification.

  4. Computers in Science and Mathematics Education in the ASEAN Region.

    Science.gov (United States)

    Talisayon, Vivien M.

    1989-01-01

    Compares policies and programs on computers in science and mathematics education in the six ASEAN countries: Brunei, Indonesia; Malaysia, Philippines, Singapore, and Thailand. Limits discussion to the computer as a teaching aid and object of study, attendant problems, and regional cooperation. (MVL)

  5. Computer-Aided Manufacturing of 3D Workpieces

    Directory of Open Access Journals (Sweden)

    Cornelia Victoria Anghel Drugarin

    2017-11-01

    Full Text Available Computer-Aided Manufacturing (CAM assumes to use dedicated software for controlling machine tools and similar devices in the process of workpieces manufacturing. CAM is, in fact, an application technology that uses computer software and machinery to simplify and automate manufacturing processes. CAM is the inheritor of computer-aided engineering (CAE and is often used conjunctively with computer-aided design (CAD. Advanced CAM solutions are forthcoming and have a large coverage, from discrete systems to multi-CAD 3D domain. CAM does not supersede the necessity of human factor intervention, as production engineers, programmers or operators, but intercedes the knowledge of experimented manufacturing engineers by using performant devices, while enhancing the competences of new professionals by having access to latest modern equipment. CAM runs along with CNC machines. The purpose of CAM-CNC system is to reduce as much as possible the intervention of human factor, thus reducing human error. The present paper follows to highlight the advantages of CAM-CNC system on a 3D workpiece manufacturing.

  6. Computer Aided Grid Interface: An Interactive CFD Pre-Processor

    Science.gov (United States)

    Soni, Bharat K.

    1997-01-01

    NASA maintains an applications oriented computational fluid dynamics (CFD) efforts complementary to and in support of the aerodynamic-propulsion design and test activities. This is especially true at NASA/MSFC where the goal is to advance and optimize present and future liquid-fueled rocket engines. Numerical grid generation plays a significant role in the fluid flow simulations utilizing CFD. An overall goal of the current project was to develop a geometry-grid generation tool that will help engineers, scientists and CFD practitioners to analyze design problems involving complex geometries in a timely fashion. This goal is accomplished by developing the CAGI: Computer Aided Grid Interface system. The CAGI system is developed by integrating CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) geometric system output and/or Initial Graphics Exchange Specification (IGES) files (including all the NASA-IGES entities), geometry manipulations and generations associated with grid constructions, and robust grid generation methodologies. This report describes the development process of the CAGI system.

  7. A supervisor system for computer aided laser machining

    International Nuclear Information System (INIS)

    Mukherjee, J.K.

    1990-01-01

    Lasers achieve non divergent beam of short wavelength energy which can propagate through normal atmosphere with little divergence and can be focused on very fine points. The final high energy per unit area on target is highly localised and suitable for various types of machining at high speeds. The most notable factor is that this high energy spot can be located precisely using light-weight optical components. The laser-machining is very amenable to environmental conditions unlike electron beam and other techniques. Precision cutting and welding of nuclear materials in normal or non oxidising atmosphere can be done using this fairly easily. To achieve these objectives, development of a computer controlled laser machining system has been undertaken. The development project aims at building a computer aided machine with indegenous controller and medium power laser suitable for cutting, welding, and marking. This paper describes the integration of the various computer aided functions, spanning over the full range, from job-defining to final finished part-delivary, in computer aided laser machining. Various innovative features of the system that render it suitable for laser tool development as well as for special machining applications with user-friendliness have been covered. (author). 5 refs., 5 figs

  8. Aid effectiveness in the Education Sector: A Dynamic Panel Analysis

    OpenAIRE

    Michaelowa, Katharina; Weber, Anke

    2007-01-01

    Applying the general question of aid effectiveness to the sector of education, this paper provides some evidence for a positive effect of development assistance on primary enrolment and completion. However, even the most optimistic estimates clearly show that at any realistic rate of growth, aid will never be able to move the world markedly closer towards the internationally agreed objective of “Education For All”. Universal primary education requires increased efficiency of educational spend...

  9. The Struggles of Financial Aid for Higher Education in Brazil

    Science.gov (United States)

    Kussuda, Cintia

    2016-01-01

    This paper examines the higher education system in Brazil and one of the financial aid policies that the government has established. It seeks to find whether the Fundo de Financiamento ao Estudante do Ensino Superior (FIES), Financing of Higher Education Student, a financial aid program established by the Brazilian government in 1999, addresses…

  10. Problematizing official narratives of HIV and AIDS education in ...

    African Journals Online (AJOL)

    2017-11-10

    Nov 10, 2017 ... HIV and AIDS education in Scotland and Zimbabwe, SAHARA-J: Journal of Social Aspects of HIV/. AIDS, 14:1 ... understanding of HIV, thus offering more useful insights into related policy and educational practices. This article will thus ...... New York: Springer Science & Business Media. Katito, J. (2014).

  11. Optimal control of HIV/AIDS dynamic: Education and treatment

    Science.gov (United States)

    Sule, Amiru; Abdullah, Farah Aini

    2014-07-01

    A mathematical model which describes the transmission dynamics of HIV/AIDS is developed. The optimal control representing education and treatment for this model is explored. The existence of optimal Control is established analytically by the use of optimal control theory. Numerical simulations suggest that education and treatment for the infected has a positive impact on HIV/AIDS control.

  12. Computer-Aided Sustainable Process Synthesis-Design and Analysis

    DEFF Research Database (Denmark)

    Kumar Tula, Anjan

    Process synthesis involves the investigation of chemical reactions needed to produce the desired product, selection of the separation techniques needed for downstream processing, as well as taking decisions on sequencing the involved separation operations. For an effective, efficient and flexible...... focuses on the development and application of a computer-aided framework for sustainable synthesis-design and analysis of process flowsheets by generating feasible alternatives covering the entire search space and includes analysis tools for sustainability, LCA and economics. The synthesis method is based...... on group contribution and a hybrid approach, where chemical process flowsheets are synthesized in the same way as atoms or groups of atoms are synthesized to form molecules in computer aided molecular design (CAMD) techniques. The building blocks in flowsheet synthesis problem are called as process...

  13. Computer aided die design: A new open-source methodology

    Science.gov (United States)

    Carneiro, Olga Sousa; Rajkumar, Ananth; Ferrás, Luís Lima; Fernandes, Célio; Sacramento, Alberto; Nóbrega, João Miguel

    2017-05-01

    In this work we present a detailed description of how to use open source based computer codes to aid the design of complex profile extrusion dies, aiming to improve its flow distribution. The work encompasses the description of the overall open-source die design methodology, the implementation of the energy conservation equation in an existing OpenFOAM® solver, which will be then capable of simulating the steady non-isothermal flow of an incompressible generalized Newtonian fluid, and two case studies to illustrate the capabilities and practical usefulness of the developed methodology. The results obtained with these case studies, used to solve real industrial problems, demonstrate that the computational design aid is an excellent alternative, from economical and technical points of view, to the experimental trial-and-error procedure commonly used in industry.

  14. TAXING OR AIDING PRIVATE UNIVERSITIES: EDUCATIONAL ...

    African Journals Online (AJOL)

    Dr Ekanem

    various merits/demerits of taxing or aiding private universities, and that private universities should not be taxed for now since they were still at the developing stage in Nigeria. Aids in the form of specific grant-in-aid should be given to the universities by government. It was recommended that private universities in Nigeria ...

  15. Contributions on Computer Aided Manufacturing of Drill-Jig Bushings

    Directory of Open Access Journals (Sweden)

    Vasile Cojocaru

    2009-01-01

    Full Text Available The paper presents the steps for computer aided manufacturing (CAMof the bushings technological class parts: design of the part in CADsoftware; generation of the parametrical link with MSExcel files; extract of the useful information for the technological design (mass, volume, surfaces; setting of the CNC lathe and necessary tools; programming of the CNC code for manufacturing. Given the large variety of the bushingsshapes and dimensions, the application focused on the jig bushings used in drilling processes.

  16. Computer-aided modeling framework – a generic modeling template

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    This work focuses on the development of a computer-aided modeling framework. The framework is a knowledge-based system that is built on a generic modeling language and structured on workflows for different modeling tasks. The overall objective is to support model developers and users to generate ....... The application of the modeling template is highlighted with a case study related to the modeling of a catalytic membrane reactor coupling dehydrogenation of ethylbenzene with hydrogenation of nitrobenzene...

  17. CADRIGS--computer aided design reliability interactive graphics system

    International Nuclear Information System (INIS)

    Kwik, R.J.; Polizzi, L.M.; Sticco, S.; Gerrard, P.B.; Yeater, M.L.; Hockenbury, R.W.; Phillips, M.A.

    1982-01-01

    An integrated reliability analysis program combining graphic representation of fault trees, automated data base loadings and reference, and automated construction of reliability code input files was developed. The functional specifications for CADRIGS, the computer aided design reliability interactive graphics system, are presented. Previously developed fault tree segments used in auxiliary feedwater system safety analysis were constructed on CADRIGS and, when combined, yielded results identical to those resulting from manual input to the same reliability codes

  18. Modeling electric fields in two dimensions using computer aided design

    International Nuclear Information System (INIS)

    Gilmore, D.W.; Giovanetti, D.

    1992-01-01

    The authors describe a method for analyzing static electric fields in two dimensions using AutoCAD. The algorithm is coded in LISP and is modeled after Coloumb's Law. The software platform allows for facile graphical manipulations of field renderings and supports a wide range of hardcopy-output and data-storage formats. More generally, this application is representative of the ability to analyze data that is the solution to known mathematical functions with computer aided design (CAD)

  19. A study on NMI report generation with computer aid diagnosis

    International Nuclear Information System (INIS)

    Yang Xiaona; Li Zhimin; Zhao Xiangjun; Qiu Jinping

    1994-01-01

    An expert system of intelligent diagnosis, computer aid diagnosis and computerized report generation and management for an nuclear medicine imaging (NMI) was performed. The mathematic model with finite set mapping for the diagnosis was evaluated. The clinical application shows, the diagnostic sensitivity and specificity of it was 85.7% ∼ 93.4% and 92% ∼ 95.6% respectively. Therefore, its application may be extended

  20. An Integrated Computer-Aided Approach for Environmental Studies

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Chen, Fei; Jaksland, Cecilia

    1997-01-01

    A general framework for an integrated computer-aided approach to solve process design, control, and environmental problems simultaneously is presented. Physicochemical properties and their relationships to the molecular structure play an important role in the proposed integrated approach. The scope...... and applicability of the integrated approach is highlighted through examples involving estimation of properties and environmental pollution prevention. The importance of mixture effects on some environmentally important properties is also demonstrated....

  1. Computer-aided diagnosis of mammographic microcalcification clusters

    International Nuclear Information System (INIS)

    Kallergi, Maria

    2004-01-01

    Computer-aided diagnosis techniques in medical imaging are developed for the automated differentiation between benign and malignant lesions and go beyond computer-aided detection by providing cancer likelihood for a detected lesion given image and/or patient characteristics. The goal of this study was the development and evaluation of a computer-aided detection and diagnosis algorithm for mammographic calcification clusters. The emphasis was on the diagnostic component, although the algorithm included automated detection, segmentation, and classification steps based on wavelet filters and artificial neural networks. Classification features were selected primarily from descriptors of the morphology of the individual calcifications and the distribution of the cluster. Thirteen such descriptors were selected and, combined with patient's age, were given as inputs to the network. The features were ranked and evaluated for the classification of 100 high-resolution, digitized mammograms containing biopsy-proven, benign and malignant calcification clusters. The classification performance of the algorithm reached a 100% sensitivity for a specificity of 85% (receiver operating characteristic area index A z =0.98±0.01). Tests of the algorithm under various conditions showed that the selected features were robust morphological and distributional descriptors, relatively insensitive to segmentation and detection errors such as false positive signals. The algorithm could exceed the performance of a similar visual analysis system that was used as basis for development and, combined with a simple image standardization process, could be applied to images from different imaging systems and film digitizers with similar sensitivity and specificity rates

  2. Vascular tissue engineering by computer-aided laser micromachining.

    Science.gov (United States)

    Doraiswamy, Anand; Narayan, Roger J

    2010-04-28

    Many conventional technologies for fabricating tissue engineering scaffolds are not suitable for fabricating scaffolds with patient-specific attributes. For example, many conventional technologies for fabricating tissue engineering scaffolds do not provide control over overall scaffold geometry or over cell position within the scaffold. In this study, the use of computer-aided laser micromachining to create scaffolds for vascular tissue networks was investigated. Computer-aided laser micromachining was used to construct patterned surfaces in agarose or in silicon, which were used for differential adherence and growth of cells into vascular tissue networks. Concentric three-ring structures were fabricated on agarose hydrogel substrates, in which the inner ring contained human aortic endothelial cells, the middle ring contained HA587 human elastin and the outer ring contained human aortic vascular smooth muscle cells. Basement membrane matrix containing vascular endothelial growth factor and heparin was to promote proliferation of human aortic endothelial cells within the vascular tissue networks. Computer-aided laser micromachining provides a unique approach to fabricate small-diameter blood vessels for bypass surgery as well as other artificial tissues with complex geometries.

  3. Computer aided approach for qualitative risk assessment of engineered systems

    International Nuclear Information System (INIS)

    Crowley, W.K.; Arendt, J.S.; Fussell, J.B.; Rooney, J.J.; Wagner, D.P.

    1978-01-01

    This paper outlines a computer aided methodology for determining the relative contributions of various subsystems and components to the total risk associated with an engineered system. Major contributors to overall task risk are identified through comparison of an expected frequency density function with an established risk criterion. Contributions that are inconsistently high are also identified. The results from this analysis are useful for directing efforts for improving system safety and performance. An analysis of uranium hexafluoride handling risk at a gaseous diffusion uranium enrichment plant using a preliminary version of the computer program EXCON is briefly described and illustrated

  4. Computer aided design and computer-assisted manufacturing in prosthetic implant dentistry

    NARCIS (Netherlands)

    Kapos, T.; Ashy, L.M.; Gallucci, G.O.; Weber, H.P.; Wismeijer, D.

    2009-01-01

    Purpose: The aim of this systematic review was to evaluate the existing scientific evidence on human clinical studies describing the application of computer-aided design/computer-assisted manufacturing (CAD/CAM) technology in restorative implant dentistry. Materials and Methods: Electronic searches

  5. Computer-aided design of antenna structures and components

    Science.gov (United States)

    Levy, R.

    1976-01-01

    This paper discusses computer-aided design procedures for antenna reflector structures and related components. The primary design aid is a computer program that establishes cross sectional sizes of the structural members by an optimality criterion. Alternative types of deflection-dependent objectives can be selected for designs subject to constraints on structure weight. The computer program has a special-purpose formulation to design structures of the type frequently used for antenna construction. These structures, in common with many in other areas of application, are represented by analytical models that employ only the three translational degrees of freedom at each node. The special-purpose construction of the program, however, permits coding and data management simplifications that provide advantages in problem size and execution speed. Size and speed are essentially governed by the requirements of structural analysis and are relatively unaffected by the added requirements of design. Computation times to execute several design/analysis cycles are comparable to the times required by general-purpose programs for a single analysis cycle. Examples in the paper illustrate effective design improvement for structures with several thousand degrees of freedom and within reasonable computing times.

  6. An AIDS educational program for third-year medical students.

    Science.gov (United States)

    Muskin, P R; Stevens, L A

    1990-11-01

    Medical student training now involves an increasing number of patients with HIV infection and AIDS. Thus far educational efforts to change attitudes and behaviors toward AIDS patients have not been successful. Education that only involves the presentation of information appears to be insufficient to alter fearful and prejudicial attitudes toward such patients. Using four different teaching modules (open discussion, role play, and two videotapes) we demonstrated a positive change in students' anticipation of how they would respond to a question or a statement from a non-AIDS patient or a patient with AIDS. There were significant changes in the students' response to AIDS patients on the Understanding, Probing, Focusing, and Judgmental scales of the Medical Helping Relationship Inventory. This initial work suggests that educators can have a positive effect on students' attitudes. Techniques that traverse the emotional barriers students erect to protect themselves from the painful feelings stimulated by working with AIDS appear to be useful.

  7. Harnessing Computer Games in Education

    Science.gov (United States)

    Jong, Morris S. Y.; Shang, Junjie; Lee, Fong-Lok; Lee, Jimmy H. M.

    2008-01-01

    Besides the ability of making learning more interesting, educators and researchers have been exploring other pedagogical potentials of computer games. How to employ games for constructivist learning and teaching has become an attention in the field of education and game design in recent years. This article gives an introduction to game-based…

  8. Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

    Science.gov (United States)

    Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

    2014-12-01

    This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  9. A critically appraised topic review of computer-aided design/computer-aided machining of removable partial denture frameworks.

    Science.gov (United States)

    Lang, Lisa A; Tulunoglu, Ibrahim

    2014-01-01

    A critically appraised topic (CAT) review is presented about the use of computer-aided design (CAD)/computer-aided machining (CAM) removable partial denture (RPD) frameworks. A systematic search of the literature supporting CAD/CAM RPD systems revealed no randomized clinical trials, hence the CAT review was performed. A PubMed search yielded 9 articles meeting the inclusion criteria. Each article was characterized by study design and level of evidence. No clinical outcomes research has been published on the use of CAD/CAM RPDs. Low levels of evidence were found in the available literature. Clinical research studies are needed to determine the efficacy of this treatment modality. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. Computer Navigation-aided Resection of Sacral Chordomas

    Directory of Open Access Journals (Sweden)

    Yong-Kun Yang

    2016-01-01

    Full Text Available Background: Resection of sacral chordomas is challenging. The anatomy is complex, and there are often no bony landmarks to guide the resection. Achieving adequate surgical margins is, therefore, difficult, and the recurrence rate is high. Use of computer navigation may allow optimal preoperative planning and improve precision in tumor resection. The purpose of this study was to evaluate the safety and feasibility of computer navigation-aided resection of sacral chordomas. Methods: Between 2007 and 2013, a total of 26 patients with sacral chordoma underwent computer navigation-aided surgery were included and followed for a minimum of 18 months. There were 21 primary cases and 5 recurrent cases, with a mean age of 55.8 years old (range: 35-84 years old. Tumors were located above the level of the S3 neural foramen in 23 patients and below the level of the S3 neural foramen in 3 patients. Three-dimensional images were reconstructed with a computed tomography-based navigation system combined with the magnetic resonance images using the navigation software. Tumors were resected via a posterior approach assisted by the computer navigation. Mean follow-up was 38.6 months (range: 18-84 months. Results: Mean operative time was 307 min. Mean intraoperative blood loss was 3065 ml. For computer navigation, the mean registration deviation during surgery was 1.7 mm. There were 18 wide resections, 4 marginal resections, and 4 intralesional resections. All patients were alive at the final follow-up, with 2 (7.7% exhibiting tumor recurrence. The other 24 patients were tumor-free. The mean Musculoskeletal Tumor Society Score was 27.3 (range: 19-30. Conclusions: Computer-assisted navigation can be safely applied to the resection of the sacral chordomas, allowing execution of preoperative plans, and achieving good oncological outcomes. Nevertheless, this needs to be accomplished by surgeons with adequate experience and skill.

  11. Features of Computer-Based Decision Aids: Systematic Review, Thematic Synthesis, and Meta-Analyses.

    Science.gov (United States)

    Syrowatka, Ania; Krömker, Dörthe; Meguerditchian, Ari N; Tamblyn, Robyn

    2016-01-26

    Patient information and education, such as decision aids, are gradually moving toward online, computer-based environments. Considerable research has been conducted to guide content and presentation of decision aids. However, given the relatively new shift to computer-based support, little attention has been given to how multimedia and interactivity can improve upon paper-based decision aids. The first objective of this review was to summarize published literature into a proposed classification of features that have been integrated into computer-based decision aids. Building on this classification, the second objective was to assess whether integration of specific features was associated with higher-quality decision making. Relevant studies were located by searching MEDLINE, Embase, CINAHL, and CENTRAL databases. The review identified studies that evaluated computer-based decision aids for adults faced with preference-sensitive medical decisions and reported quality of decision-making outcomes. A thematic synthesis was conducted to develop the classification of features. Subsequently, meta-analyses were conducted based on standardized mean differences (SMD) from randomized controlled trials (RCTs) that reported knowledge or decisional conflict. Further subgroup analyses compared pooled SMDs for decision aids that incorporated a specific feature to other computer-based decision aids that did not incorporate the feature, to assess whether specific features improved quality of decision making. Of 3541 unique publications, 58 studies met the target criteria and were included in the thematic synthesis. The synthesis identified six features: content control, tailoring, patient narratives, explicit values clarification, feedback, and social support. A subset of 26 RCTs from the thematic synthesis was used to conduct the meta-analyses. As expected, computer-based decision aids performed better than usual care or alternative aids; however, some features performed better than

  12. Computer-aided diagnosis in radiology: potential and pitfalls

    International Nuclear Information System (INIS)

    Doi, Kunio; MacMahon, Heber; Katsuragawa, Shigehiko; Nishikawa, Robert M.; Jiang Yulei

    1999-01-01

    Computer-aided diagnosis (CAD) may be defined as a diagnosis made by a physician who takes into account the computer output as a second opinion. The purpose of CAD is to improve the diagnostic accuracy and the consistency of the radiologists' image interpretation. This article is to provide a brief overview of some of CAD schemes for detection and differential diagnosis of pulmonary nodules and interstitial opacities in chest radiographs as well as clustered micro-calcifications and masses in mammograms. ROC analysis clearly indicated that the radiologists' performances were significantly improved when the computer output was available. An intelligent CAD workstation was developed for detection of breast lesions in mammograms. Results obtained from the first 10000 cases indicated the potential of CAD in detecting approximately one-half of 'missed' breast cancer

  13. What Older Adults Know about HIV/AIDS: Lessons from an HIV/AIDS Education Program

    Science.gov (United States)

    Small, La Fleur F.

    2010-01-01

    Despite being one of the fastest growing segments of the HIV/AIDS caseload, persons age 50 and older have been largely neglected in terms of HIV/AIDS education. This study describes a project involving HIV-related health education for persons [greater than or equal] 50 in an urban area of Ohio. Data from 50 persons age [greater than or equal] 50…

  14. A Computer Aided Instruction Tutorial for the Ramtek 9400 Color Graphics Display System at the Naval Postgraduate School Monterey, California.

    Science.gov (United States)

    1981-12-01

    Univesity , 1971 Submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN INFORMATION SYSTEMS from the NAVAL...of the graphics computer. The Socratic or tutorial method of intruction has long been acknowledged as an educational ideal. It is not normally used...Computer Aided Instruction (CAI) for developing application software is the subject of this thesis. The history and growth of CAI, its educational goals

  15. Computer-aided drug design at Boehringer Ingelheim

    Science.gov (United States)

    Muegge, Ingo; Bergner, Andreas; Kriegl, Jan M.

    2017-03-01

    Computer-Aided Drug Design (CADD) is an integral part of the drug discovery endeavor at Boehringer Ingelheim (BI). CADD contributes to the evaluation of new therapeutic concepts, identifies small molecule starting points for drug discovery, and develops strategies for optimizing hit and lead compounds. The CADD scientists at BI benefit from the global use and development of both software platforms and computational services. A number of computational techniques developed in-house have significantly changed the way early drug discovery is carried out at BI. In particular, virtual screening in vast chemical spaces, which can be accessed by combinatorial chemistry, has added a new option for the identification of hits in many projects. Recently, a new framework has been implemented allowing fast, interactive predictions of relevant on and off target endpoints and other optimization parameters. In addition to the introduction of this new framework at BI, CADD has been focusing on the enablement of medicinal chemists to independently perform an increasing amount of molecular modeling and design work. This is made possible through the deployment of MOE as a global modeling platform, allowing computational and medicinal chemists to freely share ideas and modeling results. Furthermore, a central communication layer called the computational chemistry framework provides broad access to predictive models and other computational services.

  16. CEGB intergraph computer aided design system as an aid for the navigation of remote manipulators

    International Nuclear Information System (INIS)

    Lichnowski, A.J.M.; Hopton, G.

    1988-01-01

    Computer Aided Design Systems with 3D Graphic capability can offer substantial benefits for the simulation and navigation of remote manipulators. The CEGB has been experimenting with its own Corporate INTERGRAPH CAD Network using as an example a remote links manipulator working within the above gas baffle dome area of an Advanced Gas Cooled Reactor. A report of this work is presented together with graphic simulations of the manipulator within the above dome area and reconstructions of images anticipated from the on board cameras. Future improvements in the speed of graphic processing will enable these techniques to be used for the on-line navigation of manipulators, as an aid to the interpretation of video images and for the training of operators without the need for full size test and training facilities. (author)

  17. Computer-Aided Experiment Planning toward Causal Discovery in Neuroscience

    Science.gov (United States)

    Matiasz, Nicholas J.; Wood, Justin; Wang, Wei; Silva, Alcino J.; Hsu, William

    2017-01-01

    Computers help neuroscientists to analyze experimental results by automating the application of statistics; however, computer-aided experiment planning is far less common, due to a lack of similar quantitative formalisms for systematically assessing evidence and uncertainty. While ontologies and other Semantic Web resources help neuroscientists to assimilate required domain knowledge, experiment planning requires not only ontological but also epistemological (e.g., methodological) information regarding how knowledge was obtained. Here, we outline how epistemological principles and graphical representations of causality can be used to formalize experiment planning toward causal discovery. We outline two complementary approaches to experiment planning: one that quantifies evidence per the principles of convergence and consistency, and another that quantifies uncertainty using logical representations of constraints on causal structure. These approaches operationalize experiment planning as the search for an experiment that either maximizes evidence or minimizes uncertainty. Despite work in laboratory automation, humans must still plan experiments and will likely continue to do so for some time. There is thus a great need for experiment-planning frameworks that are not only amenable to machine computation but also useful as aids in human reasoning. PMID:28243197

  18. [Computer-aided prescribing: from utopia to reality].

    Science.gov (United States)

    Suárez-Varela Ubeda, J; Beltrán Calvo, C; Molina López, T; Navarro Marín, P

    2005-05-31

    To determine whether the introduction of computer-aided prescribing helped reduce the administrative burden at primary care centers. Descriptive, cross-sectional design. Torreblanca Health Center in the province of Seville, southern Spain. From 29 October 2003 to the present a pilot project involving nine pharmacies in the basic health zone served by this health center has been running to evaluate computer-aided prescribing (the Receta XXI project) with real patients. All patients on the center's list of patients who came to the center for an administrative consultation to renew prescriptions for medications or supplies for long-term treatment. Total number of administrative visits per patient for patients who came to the center to renew prescriptions for long-term treatment, as recorded by the Diraya system (Historia Clinica Digital del Ciudadano, or Citizen's Digital Medical Record) during the period from February to July 2004. Total number of the same type of administrative visits recorded by the previous system (TASS) during the period from February to July 2003. The mean number of administrative visits per month during the period from February to July 2003 was 160, compared to a mean number of 64 visits during the period from February to July 2004. The reduction in the number of visits for prescription renewal was 60%. Introducing a system for computer-aided prescribing significantly reduced the number of administrative visits for prescription renewal for long-term treatment. This could help reduce the administrative burden considerably in primary care if the system were used in all centers.

  19. Application of infrared thermography in computer aided diagnosis

    Science.gov (United States)

    Faust, Oliver; Rajendra Acharya, U.; Ng, E. Y. K.; Hong, Tan Jen; Yu, Wenwei

    2014-09-01

    The invention of thermography, in the 1950s, posed a formidable problem to the research community: What is the relationship between disease and heat radiation captured with Infrared (IR) cameras? The research community responded with a continuous effort to find this crucial relationship. This effort was aided by advances in processing techniques, improved sensitivity and spatial resolution of thermal sensors. However, despite this progress fundamental issues with this imaging modality still remain. The main problem is that the link between disease and heat radiation is complex and in many cases even non-linear. Furthermore, the change in heat radiation as well as the change in radiation pattern, which indicate disease, is minute. On a technical level, this poses high requirements on image capturing and processing. On a more abstract level, these problems lead to inter-observer variability and on an even more abstract level they lead to a lack of trust in this imaging modality. In this review, we adopt the position that these problems can only be solved through a strict application of scientific principles and objective performance assessment. Computing machinery is inherently objective; this helps us to apply scientific principles in a transparent way and to assess the performance results. As a consequence, we aim to promote thermography based Computer-Aided Diagnosis (CAD) systems. Another benefit of CAD systems comes from the fact that the diagnostic accuracy is linked to the capability of the computing machinery and, in general, computers become ever more potent. We predict that a pervasive application of computers and networking technology in medicine will help us to overcome the shortcomings of any single imaging modality and this will pave the way for integrated health care systems which maximize the quality of patient care.

  20. 9th Asian Conference on Computer-Aided Surgery

    CERN Document Server

    2016-01-01

    This book presents the latest research advances in the theory, design, control, and application of robot systems intended for a variety of purposes such as manipulation, manufacturing, automation, surgery, locomotion, and biomechanics. Several chapters deal with fundamental kinematics in nature, including synthesis, calibration, redundancy, force control, dexterity, inverse and forward kinematics, kinematic singularities, and over-constrained systems. This book is a compilation of the extended versions of the very best papers selected from the many that were presented at the Asian Conference on Computer-Aided Surgery held September 16–18, 2013, in Tokyo, Japan (ACCAS 2013).

  1. Computer-Aided Diagnostics of Human Arterial System

    Directory of Open Access Journals (Sweden)

    Klara Capova

    2003-01-01

    Full Text Available The paper deals with the modelling and the simulation of physiological fluid systems laying emphasise on the human vascular system. The presented simulation method has been developed as a helpful tool for the computer-aided non-invasive diagnostics of living bodies. Using the electromechanical analogy between physiological and electrical values the introduced method makes possible the description and 3D representation of the non-linear characteristics of the human haemodynamics as well. The simulation procedure and the obtained results verified by the experiment enable to visualize all physiological and pathophysiological states of the human vascular system.

  2. A computer aided engineering tool for ECLS systems

    Science.gov (United States)

    Bangham, Michal E.; Reuter, James L.

    1987-01-01

    The Computer-Aided Systems Engineering and Analysis tool used by NASA for environmental control and life support system design studies is capable of simulating atmospheric revitalization systems, water recovery and management systems, and single-phase active thermal control systems. The designer/analysis interface used is graphics-based, and allows the designer to build a model by constructing a schematic of the system under consideration. Data management functions are performed, and the program is translated into a format that is compatible with the solution routines.

  3. CATIA Core Tools Computer Aided Three-Dimensional Interactive Application

    CERN Document Server

    Michaud, Michel

    2012-01-01

    CATIA Core Tools: Computer-Aided Three-Dimensional Interactive Application explains how to use the essential features of this cutting-edge solution for product design and innovation. The book begins with the basics, such as launching the software, configuring the settings, and managing files. Next, you'll learn about sketching, modeling, drafting, and visualization tools and techniques. Easy-to-follow instructions along with detailed illustrations and screenshots help you get started using several CATIA workbenches right away. Reverse engineering--a valuable product development skill--is also covered in this practical resource.

  4. Technology computer aided design simulation for VLSI MOSFET

    CERN Document Server

    Sarkar, Chandan Kumar

    2013-01-01

    Responding to recent developments and a growing VLSI circuit manufacturing market, Technology Computer Aided Design: Simulation for VLSI MOSFET examines advanced MOSFET processes and devices through TCAD numerical simulations. The book provides a balanced summary of TCAD and MOSFET basic concepts, equations, physics, and new technologies related to TCAD and MOSFET. A firm grasp of these concepts allows for the design of better models, thus streamlining the design process, saving time and money. This book places emphasis on the importance of modeling and simulations of VLSI MOS transistors and

  5. Computer-aided design of broad band reflection type amplifiers

    DEFF Research Database (Denmark)

    Hammershaimb, Edgar; Jeppesen, Palle; Schjær-Jacobsen, Hans

    1974-01-01

    Microwave negative resistance reflection type amplifiers using stable transferred electron devices (TED's) are optimized by numerical optimization techniques programmed for an interactive graphic datascreen. The small signal impedance of packaged TED's is measured on an automatic network analyzer...... on a datascreen, which allows for interactive programming. Comparisons of predicted amplifier performance for packaged and unpackaged devices form a basis for evaluating the possible degrading effect of package parasitics. The predictions of the computer-aided design are in good agreement with experimental...... results. The design procedure imposes no restraint on the frequency variation of the active device impedance and is therefore useful for any stable broad-banded negative resistance device....

  6. SNL Mechanical Computer Aided Design (MCAD) guide 2007.

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

    2007-12-01

    This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

  7. A fast algorithm for computer aided collimation gamma camera (CACAO)

    Science.gov (United States)

    Jeanguillaume, C.; Begot, S.; Quartuccio, M.; Douiri, A.; Franck, D.; Pihet, P.; Ballongue, P.

    2000-08-01

    The computer aided collimation gamma camera is aimed at breaking down the resolution sensitivity trade-off of the conventional parallel hole collimator. It uses larger and longer holes, having an added linear movement at the acquisition sequence. A dedicated algorithm including shift and sum, deconvolution, parabolic filtering and rotation is described. Examples of reconstruction are given. This work shows that a simple and fast algorithm, based on a diagonal dominant approximation of the problem can be derived. Its gives a practical solution to the CACAO reconstruction problem.

  8. Computer aided system for parametric design of combination die

    Science.gov (United States)

    Naranje, Vishal G.; Hussein, H. M. A.; Kumar, S.

    2017-09-01

    In this paper, a computer aided system for parametric design of combination dies is presented. The system is developed using knowledge based system technique of artificial intelligence. The system is capable to design combination dies for production of sheet metal parts having punching and cupping operations. The system is coded in Visual Basic and interfaced with AutoCAD software. The low cost of the proposed system will help die designers of small and medium scale sheet metal industries for design of combination dies for similar type of products. The proposed system is capable to reduce design time and efforts of die designers for design of combination dies.

  9. State of Student Aid and Higher Education in Texas, 2016

    Science.gov (United States)

    Fernandez, Chris; Fletcher, Carla; Klepfer, Kasey

    2016-01-01

    Texas Guaranteed Student Loan Corporation (TG) provides critical support to schools, students, and borrowers at every stage of the federal student aid process--from providing information on how to pay for a higher education including financial aid options, to facilitating successful loan repayment after graduation. This 2016 issue of "State…

  10. Educators' roles in developing adolescent HIV/AIDS knowledge and ...

    African Journals Online (AJOL)

    A purposive sample was used for the qualitative case study within an interpretivist paradigm. The study indicated that the educators believed that the school should teach adolescents' about HIV/AIDS. The aim of the school was to create awareness about non-risky behaviour in terms of HIV/AIDS among the learners.

  11. Language Planning, English Language Education and Development Aid in Bangladesh

    Science.gov (United States)

    Erling, Elizabeth J.

    2017-01-01

    The increased status of English as the language of international communication and business has meant that development aid has increasingly been used to finance language planning initiatives aimed at improving and/or expanding English language education. The intended outcome of this aid is often to provide expanded economic returns and…

  12. Perceived HIV/AIDS impact among higher education institutions in ...

    African Journals Online (AJOL)

    A descriptive questionnaire-based study was undertaken among higher education institutions in the Eastern Cape Province. The objectives of the study were to establish costs and trends in costs associated with HIV/AIDS morbidity and mortality, and to assess perceived HIV/AIDS impact on job performance and coping with ...

  13. Development of a computer-aided digital reactivity computer system for PWRs

    International Nuclear Information System (INIS)

    Chung, S.-K.; Sung, K.-Y.; Kim, D.; Cho, D.-Y.

    1993-01-01

    Reactor physics tests at initial startup and after reloading are performed to verify nuclear design and to ensure safety operation. Two kinds of reactivity computers, analog and digital, have been widely used in the pressurized water reactor (PWR) core physics test. The test data of both reactivity computers are displayed only on the strip chart recorder, and these data are managed by hand so that the accuracy of the test results depends on operator expertise and experiences. This paper describes the development of the computer-aided digital reactivity computer system (DRCS), which is enhanced by system management software and an improved system for the application of the PWR core physics test

  14. Present state of computer-aided diagnosis (CAD) development

    International Nuclear Information System (INIS)

    Fujita, Hiroshi

    2007-01-01

    Topics of computer-aided detection (CAD) are reviewed. Commercially available, Food and Drug Administration (FDA)-approved CAD systems are for fields of breast cancer (mammography), chest (flat X-ray and CT imaging) and colon (polyp detection). In Japan, only mammography CAD is approved. Efficacy of CAD is controversial, for which reliable database is important, and its construction is under development in various medical fields. Digitalized image is now popularized, which conceivably leads to improve the cost-effectiveness of diagnosis with CAD. For incentive, approval for health insurance would be the case as seen in the increased CAD sale by R2 Technology Co., and MHLW actually assists facilities to introduce the reading-aid system of mammography by sharing a half of its cost. There are 2 big projects for CAD study supported by MECSST, which the author concerns. One is the development of diagnostic aid for the multi-dimensional medical images where the multi-organ, multi-disease CAD system is considered. The other involves the CAD in brain MRI, in breast US and in eyeground picture. It is not in so far future for patients and doctors to fully enjoy the benefit of CAD. (R.T.)

  15. Computed tomography for diagnosis of intestinal cytomegalovirus infection in AIDS

    International Nuclear Information System (INIS)

    Engelbrecht, V.; Schonlau, R.; Moedder, U.

    1994-01-01

    To check the value of computed tomography (CT) in the diagnosis of cytomegalovirus (CMV) infection of the intestine, CT findings in ten patients with coloscopically proven CMV infection were reviewed. All patients were chronically ill men with AIDS. In nine of the ten cases CT scans of the small intestine and/or colon disclosed abnormalities. The predominant alteration (9/9) was a symmetric wall thickening in the bowel segments involved (10-30 mm). The location and extent showed good agreement with the inflammatory areas seen on coloscopy. The cecum and terminal ileum were the regions most frequently affected. In seven of the nine patients with CT abnormalities CT revealed pericolonic inflammation, particularly around the cecum. Lymph nodes were increased but not enlarged. Comparison of the findings in intestinal CMV infection with those in other AIDS-related diseases suggests that CT may be to limit the differential diagnosis. Abdominal CT serves as suitable primary imaging modality for the initial evaluation of patients with AIDS and abdominal symptoms of unknow etiology. (orig.)

  16. Computer Aided Automatic Control - CAAC artificial intelligence block

    Energy Technology Data Exchange (ETDEWEB)

    Balate, J.; Chramcov, B.; Princ, M. [Brno Univ. of Technology (Czech Republic). Faculty of Technology in Zlin

    2000-07-01

    The aim of the plan to build up the system CAAC - Computer Aided Automatic Control is to create modular setup of partial computing programs including theory of automatic control, algorithms of programs for processing signals and programs of control algorithms. To approach its informative contents to students and professional public the CAAC system utilizes Internet services http in the form of WWW pages. The CAAC system is being processed at the Institute of Automation and Control Technique of the Faculty of Technology in Zlin of the Brno University of Technology and is determined particularly for pedagogic purposes. Recently also the methods of artificial intelligence have been included to the open CAAC system and that is comprised in this article. (orig.)

  17. Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

    Science.gov (United States)

    Thorp, Scott A.

    1992-01-01

    This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

  18. Computing in Hydraulic Engineering Education

    Science.gov (United States)

    Duan, J. G.

    2011-12-01

    Civil engineers, pioneers of our civilization, are rarely perceived as leaders and innovators in modern society because of retardations in technology innovation. This crisis has resulted in the decline of the prestige of civil engineering profession, reduction of federal funding on deteriorating infrastructures, and problems with attracting the most talented high-school students. Infusion of cutting-edge computer technology and stimulating creativity and innovation therefore are the critical challenge to civil engineering education. To better prepare our graduates to innovate, this paper discussed the adaption of problem-based collaborative learning technique and integration of civil engineering computing into a traditional civil engineering curriculum. Three interconnected courses: Open Channel Flow, Computational Hydraulics, and Sedimentation Engineering, were developed with emphasis on computational simulations. In Open Channel flow, the focuses are principles of free surface flow and the application of computational models. This prepares students to the 2nd course, Computational Hydraulics, that introduce the fundamental principles of computational hydraulics, including finite difference and finite element methods. This course complements the Open Channel Flow class to provide students with in-depth understandings of computational methods. The 3rd course, Sedimentation Engineering, covers the fundamentals of sediment transport and river engineering, so students can apply the knowledge and programming skills gained from previous courses to develop computational models for simulating sediment transport. These courses effectively equipped students with important skills and knowledge to complete thesis and dissertation research.

  19. NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction)

    Energy Technology Data Exchange (ETDEWEB)

    Handler, B.H. (Oak Ridge K-25 Site, TN (USA)); France, P.A.; Frey, S.C.; Gaubas, N.F.; Hyland, K.J.; Lindsey, A.M.; Manley, D.O. (Oak Ridge Associated Universities, Inc., TN (USA)); Hunnum, W.H. (North Carolina Univ., Chapel Hill, NC (USA)); Smith, D.L. (Memphis State Univ., TN (USA))

    1990-07-01

    Data Systems Engineering Organization (DSEO) personnel developed a prototype computer aided instruction CAI system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project was to provide a CAI prototype that could be used as an enhancement to existing NALDA training. The CAI prototype project was performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. The findings from Phase I are documented in Recommended CAI Approach for the NALDA System (Duncan et al., 1987). In Phase II, a structured design and specifications were developed, and a prototype CAI system was created. A report, NALDA CAI Prototype: Phase II Final Report, was written to record the findings and results of Phase II. NALDA CAI: Recommendations for an Advanced Instructional Model, is comprised of related papers encompassing research on computer aided instruction CAI, newly developing training technologies, instructional systems development, and an Advanced Instructional Model. These topics were selected because of their relevancy to the CAI needs of NALDA. These papers provide general background information on various aspects of CAI and give a broad overview of new technologies and their impact on the future design and development of training programs. The paper within have been index separately elsewhere.

  20. Computer-aided ultrasonic inspection of steam turbine rotors

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, K.H.; Weber, M.; Weiss, M. [GEC ALSTHOM Energie GmbH, Nuremberg (Germany)

    1998-12-31

    As the output and economic value of power plants increase, the detection and sizing of the type of flaws liable to occur in the rotors of turbines using ultrasonic methods assumes increasing importance. An ultrasonic inspection carried out at considerable expense is expected to bring to light all safety-relevant flaws and to enable their size to be determined so as to permit a fracture-mechanics analysis to assess the reliability of the rotor under all possible stresses arising in operation with a high degree of accuracy. The advanced computer-aided ultrasonic inspection of steam turbine rotors have improved reliability, accuracy and reproducibility of ultrasonic inspection. Further, there has been an improvement in the resolution of resolvable group indications by applying reconstruction and imagine methods. In general, it is also true for the advanced computer-aided ultrasonic inspection methods that, in the case of flaw-affected forgings, automated data acquisition provides a substantial rationalization and a significant documentation of the results for the fracture mechanics assessment compared to manual inspection. (orig.) 8 refs.

  1. Collaborative research on fluidization employing computer-aided particle tracking

    International Nuclear Information System (INIS)

    Chen, M.M.

    1990-01-01

    The objective of this work is to obtain unique, fundamental information on fluidization dynamics over a wide range of flow regimes using a Transportable Computer-Aided Particle Tracking Apparatus (TCAPTA). The contractor will design and fabricate a transportable version of the Computer-Aided Particle Tracking Facility (CAPTF) he has previously developed. The contractor will install and operate the (TCAPTA) at the METC fluidization research facilities. Quantitative data on particle motion will be obtained and reduced. The data will be used to provide needed information for modeling of bed dynamics, and prediction of bed performance, including erosion. A radioactive tracer particle, identical in size shape and mass to the bed particles under study, is mixed in the bed. The radiation emitted by the tracer particle, monitored continuously by 16 scintillation detectors, allows its position to be determined as a function of time. Stochastic mixing processes intrinsic to fluidization further cause the particle to travel to all active regions of the bed, thus sampling the motion in these regions. After a long test run to insure that a sufficient sampling have been acquired, time-differentiation and other statistical processing will then yield the mean velocity distribution, the fluctuating velocity distribution, many types of auto- and cross correlations, as well as mean fluxes, including the mean momentum fluxes due to random motion, which represent the kinetic contributions to the mean stress tensor

  2. Robotics, Artificial Intelligence, Computer Simulation: Future Applications in Special Education.

    Science.gov (United States)

    Moore, Gwendolyn B.; And Others

    1986-01-01

    Describes possible applications of new technologies to special education. Discusses results of a study designed to explore the use of robotics, artificial intelligence, and computer simulations to aid people with handicapping conditions. Presents several scenarios in which specific technological advances may contribute to special education…

  3. Computer-aided analysis of cutting processes for brittle materials

    Science.gov (United States)

    Ogorodnikov, A. I.; Tikhonov, I. N.

    2017-12-01

    This paper is focused on 3D computer simulation of cutting processes for brittle materials and silicon wafers. Computer-aided analysis of wafer scribing and dicing is carried out with the use of the ANSYS CAE (computer-aided engineering) software, and a parametric model of the processes is created by means of the internal ANSYS APDL programming language. Different types of tool tip geometry are analyzed to obtain internal stresses, such as a four-sided pyramid with an included angle of 120° and a tool inclination angle to the normal axis of 15°. The quality of the workpieces after cutting is studied by optical microscopy to verify the FE (finite-element) model. The disruption of the material structure during scribing occurs near the scratch and propagates into the wafer or over its surface at a short range. The deformation area along the scratch looks like a ragged band, but the stress width is rather low. The theory of cutting brittle semiconductor and optical materials is developed on the basis of the advanced theory of metal turning. The fall of stress intensity along the normal on the way from the tip point to the scribe line can be predicted using the developed theory and with the verified FE model. The crystal quality and dimensions of defects are determined by the mechanics of scratching, which depends on the shape of the diamond tip, the scratching direction, the velocity of the cutting tool and applied force loads. The disunity is a rate-sensitive process, and it depends on the cutting thickness. The application of numerical techniques, such as FE analysis, to cutting problems enhances understanding and promotes the further development of existing machining technologies.

  4. Computer-Aided Training and Quality Assessment of Creative Abilities

    Directory of Open Access Journals (Sweden)

    V. P. Pechnikov

    2015-01-01

    Full Text Available The article describes the training program that takes into account the laws of human mental activity. The peculiarity of this training is that it enables specialists to generate additional intellectual potentials. This potentials relate to various kinds of illogical (intuitive and hybrid (human-machine intelligences that are associated with the quality of professional and creative activity in future. Progress in trans-phenomenal functional systems of the brain is possible by means of special procedures and computer-based training programs.The article offers a logical system of computer-aided training. This system repeatedly compares its input and output data and uses a feedback as the innate human characteristic to obtain the final result.Computer-aided training can be implemented in analog and numeric form. The article deals with the numeric widely used MS Excel-based software. It provides tabular and graphic style visualization desirable for training.A specific technical program is used for training. It allows specialists to develop a reinforcement shell of square cell type of minimal weight. In designing various constraints can be considered.On the main page of MS Excel program there are input data tables, various forms of the cell, methods of its manufacturing, and a scale table. Coefficients needed for calculations are in the next tables. The next tables contain also technological and design limitations. The basic table enables us to vary the geometric complexes of the reinforcement shell. Using the tabular and graphical results of calculations an operator can define values of further steps (iterations. The operator’s aim is to design the shell of minimum weight for the shortest time or number of steps. There is number of counters using macros in the MS Excel tables to calculate the number of past iterations.

  5. Assessment of the fit of removable partial denture fabricated by computer-aided designing/computer aided manufacturing technology

    Directory of Open Access Journals (Sweden)

    Khalid A.O. Arafa

    2018-01-01

    Full Text Available Objective: To assess the level of evidence that supports the quality of fit for removable partial denture (RPD fabricated by computer-aided designing/computer aided manufacturing (CAD/CAM and rapid prototyping (RP technology. Methods: An electronic search was performed in Google Scholar, PubMed, and Cochrane library search engines, using Boolean operators. All articles published in English and published in the period from 1950 until April 2017 were eligible to be included in this review. The total number of articles contained the search terms in any part of the article (including titles, abstracts, or article texts were screened, which resulted in 214 articles. After exclusion of irrelevant and duplicated articles, 12 papers were included in this systematic review. Results: All the included studies were case reports, except one study, which was a case series that recruited 10 study participants. The visual and tactile examination in the cast or clinically in the patient’s mouth was the most-used method for assessment of the fit of RPDs. From all included studies, only one has assessed the internal fit between RPDs and oral tissues using silicone registration material. The vast majority of included studies found that the fit of RPDs ranged from satisfactory to excellent fit. Conclusion: Despite the lack of clinical trials that provide strong evidence, the available evidence supported the claim of good fit of RPDs fabricated by new technologies using CAD/CAM.

  6. Recent advances in the reconstruction of cranio-maxillofacial defects using computer-aided design/computer-aided manufacturing.

    Science.gov (United States)

    Oh, Ji-Hyeon

    2018-12-01

    With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.

  7. Assessment of the fit of removable partial denture fabricated by computer-aided designing/computer aided manufacturing technology.

    Science.gov (United States)

    Arafa, Khalid A O

    2018-01-01

    To assess the level of evidence that supports the quality of fit for removable partial denture (RPD) fabricated by computer-aided designing/computer aided manufacturing (CAD/CAM) and rapid prototyping (RP) technology. Methods: An electronic search was performed in Google Scholar, PubMed, and Cochrane library search engines, using Boolean operators. All articles published in English and published in the period from 1950 until April 2017 were eligible to be included in this review. The total number of articles contained the search terms in any part of the article (including titles, abstracts, or article texts) were screened, which resulted in 214 articles. After exclusion of irrelevant and duplicated articles, 12 papers were included in this systematic review.  Results: All the included studies were case reports, except one study, which was a case series that recruited 10 study participants. The visual and tactile examination in the cast or clinically in the patient's mouth was the most-used method for assessment of the fit of RPDs. From all included studies, only one has assessed the internal fit between RPDs and oral tissues using silicone registration material. The vast majority of included studies found that the fit of RPDs ranged from satisfactory to excellent fit. Conclusion: Despite the lack of clinical trials that provide strong evidence, the available evidence supported the claim of good fit of RPDs fabricated by new technologies using CAD/CAM.

  8. HIV/AIDS EDUCATION OF HEALTH CARE PROVIDERS

    Directory of Open Access Journals (Sweden)

    Ljaljević Agima

    2015-03-01

    Full Text Available Introduction: The aim of this study was to determine perceptions of service providers in the healthcare on their awareness and knowledge about HIV/AIDS, as well as the relationship of the above parameters and the existence of stigma and discrimination against people with HIV/AIDS. Method: The type of the study was a behavioral cross sectional study. The survey was conducted in 2012, on a representative sample of health workers in Montenegro. The main survey instrument was specifically designed questionnaire that consisted of six parts, out of which one was related to knowledge about HIV and AIDS. Data were analyzed by methods of inferential statistics. Results: More than four out of ten respondents have never attended educational workshops on HIV/AIDS. Research has shown that there is a highly significant statistical correlation between estimates of their own knowledge about HIV / AIDS and previous educations. Almost two-thirds of respondents, who attended some type of education in the field of HIV/AIDS, believe to have a satisfactory level of knowledge in the area. Conclusion: Health care service providers evaluate their knowledge of HIV/AIDS as insufficient.

  9. Integrating HIV & AIDS Education in Pre-Service Mathematics Education for Social Justice

    Science.gov (United States)

    van Laren, Linda

    2011-01-01

    Since 1999, many South African education policy documents have mandated integration of HIV & AIDS education in learning areas/disciplines. Policy document research has shown that although South African politicians and managers have produced volumes of eloquent and compelling legislation regarding provision for HIV & AIDS education, little…

  10. Integrating HIV & AIDS education in pre-service mathematics education for social justice

    Directory of Open Access Journals (Sweden)

    Linda van Laren

    2011-01-01

    Full Text Available Since 1999, many South African education policy documents have mandated integration of HIV & AIDS education in learning areas/disciplines. Policy document research has shown that although South African politicians and managers have produced volumes of eloquent and compelling legislation regarding provision for HIV & AIDS education, little of this is translated into action. The impact of HIV & AIDS permeates the social, economic and political arenas in South Africa. Integration of HIV & AIDS education across disciplines can serve as a strategy to further the ideals of social justice. This paper focuses on how integration in the teaching and learning of Mathematics Education provides opportunities to take action for social justice. The inquiry explores the following question: How can the myth that there is 'nothing we can do' about HIV & AIDS, which is linked to social justice issues, be addressed through integration of HIV & AIDS education in Mathematics pre-service teacher education? Drawing on self-study, the work of a Mathematics teacher educator who worked with pre-service teachers to integrate HIV & AIDS education at a higher education institution is described. By considering integration of HIV & AIDS education in Mathematics Education and taking action it is possible to develop strategies which directly relate to social justice.

  11. Computer-Aided Drug Discovery in Plant Pathology.

    Science.gov (United States)

    Shanmugam, Gnanendra; Jeon, Junhyun

    2017-12-01

    Control of plant diseases is largely dependent on use of agrochemicals. However, there are widening gaps between our knowledge on plant diseases gained from genetic/mechanistic studies and rapid translation of the knowledge into target-oriented development of effective agrochemicals. Here we propose that the time is ripe for computer-aided drug discovery/design (CADD) in molecular plant pathology. CADD has played a pivotal role in development of medically important molecules over the last three decades. Now, explosive increase in information on genome sequences and three dimensional structures of biological molecules, in combination with advances in computational and informational technologies, opens up exciting possibilities for application of CADD in discovery and development of agrochemicals. In this review, we outline two categories of the drug discovery strategies: structure- and ligand-based CADD, and relevant computational approaches that are being employed in modern drug discovery. In order to help readers to dive into CADD, we explain concepts of homology modelling, molecular docking, virtual screening, and de novo ligand design in structure-based CADD, and pharmacophore modelling, ligand-based virtual screening, quantitative structure activity relationship modelling and de novo ligand design for ligand-based CADD. We also provide the important resources available to carry out CADD. Finally, we present a case study showing how CADD approach can be implemented in reality for identification of potent chemical compounds against the important plant pathogens, Pseudomonas syringae and Colletotrichum gloeosporioides .

  12. Computer based aids for operator support in nuclear power plants

    International Nuclear Information System (INIS)

    1990-04-01

    In the framework of the Agency's programme on nuclear safety a survey was carried out based on a questionnaire to collect information on computer based aids for operator support in nuclear power plants in Member States. The intention was to put together a state-of-the-art report where different systems under development or already implemented would be described. This activity was also supported by an INSAG (International Nuclear Safety Advisory Group) recommendation. Two consultant's meetings were convened and their work is reflected in the two sections of the technical document. The first section, produced during the first meeting, is devoted to provide some general background material on the overall usability of Computerized Operator Decision Aids (CODAs), their advantages and shortcomings. During this first meeting, the first draft of the questionnaire was also produced. The second section presents the evaluation of the 40 questionnaires received from 11 Member States and comprises a short description of each system and some statistical and comparative observations. The ultimate goal of this activity was to inform Member States, particularly those who are considering implementation of a CODA, on the status of related developments elsewhere. 8 refs, 10 figs, 4 tabs

  13. Operator aids and expert systems in user computer interfaces

    International Nuclear Information System (INIS)

    Nelson, W.R.

    1986-01-01

    Recent events have demonstrated the potential for catastrophic accidents at process control facilities, resulting in severe economic damages or loss of human life. Human operators play a central role in the outcome of accidents in process control plants, because of their responsibility to make decisions regarding the appropriate corrective actions needed to control the event. In recent years, researchers have been attempting to apply Artificial Intelligence (AI) methods for developing computer-based decision aids for process control operators. Much of this research activity has taken place within the nuclear industry. In order to assess the implications of expert systems for nuclear reactor operators, the United States Nuclear Regulatory Commission (USNRC) has sponsored a research program at the Idaho National Engineering Laboratory (INEL). Included in this program have been the development of a prototype expert system for nuclear reactor operators, as well as two experiments to measure the effects of the expert system on operator performance in simulated accident conditions. This paper briefly summarizes the experience gained during this research program and assesses the potential future of expert system decision aids for process control operators

  14. AIDS education for a low literate audience in Zambia.

    Science.gov (United States)

    Msimuko, A K

    1988-04-01

    A workshop funded by the USA Program for Appropriate Technology in Health (PATH) was an effort by Zambia toward prevention and control of AIDS. The lack of educational materials about AIDS for a low-literate audience was the major problem addressed by the workshop. Other problems include the lack of collaborative effort in the development of materials on AIDS, and the lack of skills needed in the development of such materials in Zambia. 1 of the objectives of the workshop was to launch the Planned Parenthood Association of Zambia's (PPAZ) materials development project. The scope of this project includes the production of educational materials on AIDS for low-literate audiences and a counseling handbook for family planning workers. Print materials should be simply written, using words, idioms, and graphics that are familiar to the target audience. Other workshop objectives included the establishment of collaborative relationships between organizations involved in existing AIDS educational activities in Zambia, and the development of practical skills needed to produce print materials. Education was identified as the most important strategy for the prevention and control of AIDS, and PPAZ should be the executing agency of the print materials project. Audience research, using focus group techniques, focus group discussions, behavioral messages, and pretesting of messages, should be the most effective means of reaching targeted audiences. PPAZ is contracted by PATH to begin development of educational materials, and 2 committees have formed to implement the project and to establish interagency collaboration. Audience research was begun between January and March of 1988, focusing on people's beliefs, practices, and ideas about AIDS. The final phase of the project will be the printing, distribution, and use of the AIDS materials and the training of family planning field workers in the proper use of these materials.

  15. The Impact of Aid on Education Policy in India

    Science.gov (United States)

    Colclough, Christopher; De, Anuradha

    2010-01-01

    In the early 1990s, large numbers of children in India remained out of school. International commitments to achieve education for all (EFA) globally meant that India was an important case for donors. India was pressed to accept aid for primary education, and agreed with some reluctance. Although subsequent donor involvement was substantial and…

  16. HIV/AIDS Education: What Works for Swaziland University Students?

    Science.gov (United States)

    Sukati, C. W. S.; Vilakati, Nokuthula; Esampally, Chandraiah

    2010-01-01

    Background: HIV/AIDS poses a major threat to development and poverty alleviation, particularly in Sub-Saharan Africa. Education has been declared an effective preventative approach and the single most powerful weapon against HIV transmission. However, there is a paucity of research on the type of education required, the appropriate…

  17. AIDS education in schools - awareness, attitudes and opinions ...

    African Journals Online (AJOL)

    Opinions were canvassed initially by means of a questionnaire to three groups of professionals who could become involved in AIDS education programmes: student teachers and lecturers in the Department of Education at Rhodes University, theology students at the local Theological College and health care professionals ...

  18. Fundamental limitations in developing computer-aided detection for mammography

    Science.gov (United States)

    Nishikawa, Robert M.; Pesce, Lorenzo L.

    2011-08-01

    While asymptomatic screening with mammography has been proven to reduce breast cancer mortality, radiologists miss cancers when reading screening mammograms. Computer-aided detection (CADe) is being developed to help radiologists avoid overlooking a cancer. In this paper, we describe two overarching issues that limit the current development of CADe schemes. These are the inability to optimize a scheme for clinical impact - current methods only optimize for how well the CADe scheme works in the absence of a radiologist - and the lack of a figure of merit that quantifies the performance efficiency of the CADe scheme. Such a figure of merit could be used to determine how much better performance a CADe scheme could obtain, at least in theory, and which component of the several techniques employed in the CADe scheme is the weakest link.

  19. Computer-aided resource planning and scheduling for radiological services

    Science.gov (United States)

    Garcia, Hong-Mei C.; Yun, David Y.; Ge, Yiqun; Khan, Javed I.

    1996-05-01

    There exists tremendous opportunity in hospital-wide resource optimization based on system integration. This paper defines the resource planning and scheduling requirements integral to PACS, RIS and HIS integration. An multi-site case study is conducted to define the requirements. A well-tested planning and scheduling methodology, called Constrained Resource Planning model, has been applied to the chosen problem of radiological service optimization. This investigation focuses on resource optimization issues for minimizing the turnaround time to increase clinical efficiency and customer satisfaction, particularly in cases where the scheduling of multiple exams are required for a patient. How best to combine the information system efficiency and human intelligence in improving radiological services is described. Finally, an architecture for interfacing a computer-aided resource planning and scheduling tool with the existing PACS, HIS and RIS implementation is presented.

  20. Decision trees and integrated features for computer aided mammographic screening

    Energy Technology Data Exchange (ETDEWEB)

    Kegelmeyer, W.P. Jr.; Groshong, B.; Allmen, M.; Woods, K.

    1997-02-01

    Breast cancer is a serious problem, which in the United States causes 43,000 deaths a year, eventually striking 1 in 9 women. Early detection is the only effective countermeasure, and mass mammography screening is the only reliable means for early detection. Mass screening has many shortcomings which could be addressed by a computer-aided mammographic screening system. Accordingly, we have applied the pattern recognition methods developed in earlier investigations of speculated lesions in mammograms to the detection of microcalcifications and circumscribed masses, generating new, more rigorous and uniform methods for the detection of both those signs. We have also improved the pattern recognition methods themselves, through the development of a new approach to combinations of multiple classifiers.

  1. Computer-aided Drug Design: Using Numbers to your Advantage.

    Science.gov (United States)

    Faver, John C; Ucisik, M Nihan; Yang, Wei; Merz, Kenneth M

    2013-09-12

    Computer-aided drug design could benefit from a greater understanding of how errors arise and propagate in biomolecular modeling. With such knowledge, model predictions could be associated with quantitative estimates of their uncertainty. In addition, novel algorithms could be designed to proactively reduce prediction errors. We investigated how errors propagate in statistical mechanical ensembles and found that free energy evaluations based on single molecular configurations yield maximum uncertainties in free energy. Furthermore, increasing the size of the ensemble by sampling and averaging over additional independent configurations reduces uncertainties in free energy dramatically. This finding suggests a general strategy that could be utilized as a post-hoc correction for improved precision in virtual screening and free energy estimation.

  2. Computer Vision Aided Measurement of Morphological Features in Medical Optics

    Directory of Open Access Journals (Sweden)

    Bogdana Bologa

    2010-09-01

    Full Text Available This paper presents a computer vision aided method for non invasive interupupillary (IPD distance measurement. IPD is a morphological feature requirement in any oftalmological frame prescription. A good frame prescription is highly dependent nowadays on accurate IPD estimation in order for the lenses to be eye strain free. The idea is to replace the ruler or the pupilometer with a more accurate method while keeping the patient eye free from any moving or gaze restrictions. The method proposed in this paper uses a video camera and a punctual light source in order to determine the IPD with under millimeter error. The results are compared against standard eye and object detection routines from literature.

  3. Computer aided design of nickel-base superalloys

    International Nuclear Information System (INIS)

    Lawrence, P.J.

    1988-01-01

    This paper describes a computer aided design process for Ni-base superalloys developed and employed at ASEA Brown Boveri. The technique involves a series of modules each of which predicts a particular property of a hypothetical new composition. In the first stage of the development of this design techniques modules were produced to predict phase stability, using PHACOMP, and high temperature creep strength and hot corrosion resistance, using multiple linear regression equations derived from the data in the literature. Alloys designed using these technique are also discussed and, in particular, shortcomings of the design process are highlighted. This information was then used to produce a revamped design methodology involving extra modules, including prediction of an alloy's gamma-prime content. (orig.)

  4. Evolution of Geometric Sensitivity Derivatives from Computer Aided Design Models

    Science.gov (United States)

    Jones, William T.; Lazzara, David; Haimes, Robert

    2010-01-01

    The generation of design parameter sensitivity derivatives is required for gradient-based optimization. Such sensitivity derivatives are elusive at best when working with geometry defined within the solid modeling context of Computer-Aided Design (CAD) systems. Solid modeling CAD systems are often proprietary and always complex, thereby necessitating ad hoc procedures to infer parameter sensitivity. A new perspective is presented that makes direct use of the hierarchical associativity of CAD features to trace their evolution and thereby track design parameter sensitivity. In contrast to ad hoc methods, this method provides a more concise procedure following the model design intent and determining the sensitivity of CAD geometry directly to its respective defining parameters.

  5. 13th International Conference on Computer Aided Engineering

    CERN Document Server

    Pietrusiak, Damian

    2017-01-01

    These proceedings of the 13th International Conference on Computer Aided Engineering present selected papers from the event, which was held in Polanica Zdrój, Poland, from June 22 to 25, 2016. The contributions are organized according to thematic sections on the design and manufacture of machines and technical systems; durability prediction; repairs and retrofitting of power equipment; strength and thermodynamic analyses for power equipment; design and calculation of various types of load-carrying structures; numerical methods for dimensioning materials handling; and long-distance transport equipment. The conference and its proceedings offer a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances in this dynamic field.

  6. Computer- Aided Design in Power Engineering Application of Software Tools

    CERN Document Server

    Stojkovic, Zlatan

    2012-01-01

    This textbooks demonstrates the application of software tools in solving a series of problems from the field of designing power system structures and systems. It contains four chapters: The first chapter leads the reader through all the phases necessary in the procedures of computer aided modeling and simulation. It guides through the complex problems presenting on the basis of eleven original examples. The second chapter presents  application of software tools in power system calculations of power systems equipment design. Several design example calculations are carried out using engineering standards like MATLAB, EMTP/ATP, Excel & Access, AutoCAD and Simulink. The third chapters focuses on the graphical documentation using a collection of software tools (AutoCAD, EPLAN, SIMARIS SIVACON, SIMARIS DESIGN) which enable the complete automation of the development of graphical documentation of a power systems. In the fourth chapter, the application of software tools in the project management in power systems ...

  7. Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system

    Science.gov (United States)

    das Neves, Flávio Domingues; de Almeida Prado Naves Carneiro, Thiago; do Prado, Célio Jesus; Prudente, Marcel Santana; Zancopé, Karla; Davi, Letícia Resende; Mendonça, Gustavo; Soares, Carlos José

    2014-08-01

    The current study evaluated prosthetic dental crowns obtained by optical scanning and a computer-aided designing/computer-aided manufacturing system using micro-computed tomography to compare the marginal fit. The virtual models were obtained with four different scanning surfaces: typodont (T), regular impressions (RI), master casts (MC), and powdered master casts (PMC). Five virtual models were obtained for each group. For each model, a crown was designed on the software and milled from feldspathic ceramic blocks. Micro-CT images were obtained for marginal gap measurements and the data were statistically analyzed by one-way analysis of variance followed by Tukey's test. The mean vertical misfit was T=62.6±65.2 μm; MC=60.4±38.4 μm; PMC=58.1±38.0 μm, and RI=89.8±62.8 μm. Considering a percentage of vertical marginal gap of up to 75 μm, the results were T=71.5%, RI=49.2%, MC=69.6%, and PMC=71.2%. The percentages of horizontal overextension were T=8.5%, RI=0%, MC=0.8%, and PMC=3.8%. Based on the results, virtual model acquisition by scanning the typodont (simulated mouth) or MC, with or without powder, showed acceptable values for the marginal gap. The higher result of marginal gap of the RI group suggests that it is preferable to scan this directly from the mouth or from MC.

  8. Fracture resistance of computer-aided design/computer-aided manufacturing-generated composite resin-based molar crowns.

    Science.gov (United States)

    Harada, Akio; Nakamura, Keisuke; Kanno, Taro; Inagaki, Ryoichi; Örtengren, Ulf; Niwano, Yoshimi; Sasaki, Keiichi; Egusa, Hiroshi

    2015-04-01

    The aim of this study was to investigate whether different fabrication processes, such as the computer-aided design/computer-aided manufacturing (CAD/CAM) system or the manual build-up technique, affect the fracture resistance of composite resin-based crowns. Lava Ultimate (LU), Estenia C&B (EC&B), and lithium disilicate glass-ceramic IPS e.max press (EMP) were used. Four types of molar crowns were fabricated: CAD/CAM-generated composite resin-based crowns (LU crowns); manually built-up monolayer composite resin-based crowns (EC&B-monolayer crowns); manually built-up layered composite resin-based crowns (EC&B-layered crowns); and EMP crowns. Each type of crown was cemented to dies and the fracture resistance was tested. EC&B-layered crowns showed significantly lower fracture resistance compared with LU and EMP crowns, although there was no significant difference in flexural strength or fracture toughness between LU and EC&B materials. Micro-computed tomography and fractographic analysis showed that decreased strength probably resulted from internal voids in the EC&B-layered crowns introduced by the layering process. There was no significant difference in fracture resistance among LU, EC&B-monolayer, and EMP crowns. Both types of composite resin-based crowns showed fracture loads of >2000 N, which is higher than the molar bite force. Therefore, CAD/CAM-generated crowns, without internal defects, may be applied to molar regions with sufficient fracture resistance. © 2015 Eur J Oral Sci.

  9. Computer-Aided Detection of Kidney Tumor on Abdominal Computed Tomography Scans

    International Nuclear Information System (INIS)

    Kim, D.Y.; Park, J.W.

    2004-01-01

    Purpose: To implement a computer-aided detection system for kidney segmentation and kidney tumor detection on abdominal computed tomography (CT) scans. Material and Methods: Abdominal CT images were digitized with a film digitizer, and a gray-level threshold method was used to segment the kidney. Based on texture analysis performed on sample images of kidney tumors, a portion of the kidney tumor was selected as seed region for start point of the region-growing process. The average and standard deviations were used to detect the kidney tumor. Starting at the detected seed region, the region-growing method was used to segment the kidney tumor with intensity values used as an acceptance criterion for a homogeneous test. This test was performed to merge the neighboring region as kidney tumor boundary. These methods were applied on 156 transverse images of 12 cases of kidney tumors scanned using a G.E. Hispeed CT scanner and digitized with a Lumisys LS-40 film digitizer. Results: The computer-aided detection system resulted in a kidney tumor detection sensitivity of 85% and no false-positive findings. Conclusion: This computer-aided detection scheme was useful for kidney tumor detection and gave the characteristics of detected kidney tumors

  10. Computer-Assisted Concept Mapping: Visual Aids for Knowledge Construction.

    Science.gov (United States)

    Mammen, Jennifer R

    2016-07-01

    Concept mapping is a visual representation of ideas that facilitates critical thinking and is applicable to many areas of nursing education. Computer-assisted concept maps are more flexible and less constrained than traditional paper methods, allowing for analysis and synthesis of complex topics and larger amounts of data. Ability to iteratively revise and collaboratively create computerized maps can contribute to enhanced interpersonal learning. However, there is limited awareness of free software that can support these types of applications. This educational brief examines affordances and limitations of computer-assisted concept maps and reviews free software for development of complex, collaborative malleable maps. Free software, such as VUE, XMind, MindMaple, and others, can substantially contribute to the utility of concept mapping for nursing education. Computerized concept-mapping is an important tool for nursing and is likely to hold greater benefit for students and faculty than traditional pen-and-paper methods alone. [J Nurs Educ. 2016;55(7):403-406.]. Copyright 2016, SLACK Incorporated.

  11. Computer-aided diagnosis and artificial intelligence in clinical imaging.

    Science.gov (United States)

    Shiraishi, Junji; Li, Qiang; Appelbaum, Daniel; Doi, Kunio

    2011-11-01

    Computer-aided diagnosis (CAD) is rapidly entering the radiology mainstream. It has already become a part of the routine clinical work for the detection of breast cancer with mammograms. The computer output is used as a "second opinion" in assisting radiologists' image interpretations. The computer algorithm generally consists of several steps that may include image processing, image feature analysis, and data classification via the use of tools such as artificial neural networks (ANN). In this article, we will explore these and other current processes that have come to be referred to as "artificial intelligence." One element of CAD, temporal subtraction, has been applied for enhancing interval changes and for suppressing unchanged structures (eg, normal structures) between 2 successive radiologic images. To reduce misregistration artifacts on the temporal subtraction images, a nonlinear image warping technique for matching the previous image to the current one has been developed. Development of the temporal subtraction method originated with chest radiographs, with the method subsequently being applied to chest computed tomography (CT) and nuclear medicine bone scans. The usefulness of the temporal subtraction method for bone scans was demonstrated by an observer study in which reading times and diagnostic accuracy improved significantly. An additional prospective clinical study verified that the temporal subtraction image could be used as a "second opinion" by radiologists with negligible detrimental effects. ANN was first used in 1990 for computerized differential diagnosis of interstitial lung diseases in CAD. Since then, ANN has been widely used in CAD schemes for the detection and diagnosis of various diseases in different imaging modalities, including the differential diagnosis of lung nodules and interstitial lung diseases in chest radiography, CT, and position emission tomography/CT. It is likely that CAD will be integrated into picture archiving and

  12. Chile: educational game, "Learning about AIDS: the Responsibility of All".

    Science.gov (United States)

    1993-01-01

    For more than 10 years, People's Health Education (EPES) has developed educational materials which call upon target audiences to integrate their practical experiences into a collective learning process based upon games. The methodology and materials aim to meet the needs of the most underprivileged sections of the population. EPES produced "Learning about AIDS: the responsibility of all," a game which can be used as it is or adapted to meet the needs of differing groups. The objectives of the game are to provide basic information on AIDS; to facilitate the expression of ideas, beliefs, and myths about AIDS; to promote forums for discussion in order to exchange opinions and views on sexuality and AIDS; to create awareness on how AIDS affects the community; and to create awareness of the need to prevent the disease. Played in couples to strengthen the level of interpersonal communication on such issues, the game is played because AIDS is a fact of everyday life which is affecting the community, because learning about AIDS will help people to protect themselves and their communities from the disease and groundless associated fears, and because open discussion is needed to help prevent more people from becoming infected with HIV.

  13. Computer Series, 3: Computer Graphics for Chemical Education.

    Science.gov (United States)

    Soltzberg, Leonard J.

    1979-01-01

    Surveys the current scene in computer graphics from the point of view of a chemistry educator. Discusses the scope of current applications of computer graphics in chemical education, and provides information about hardware and software systems to promote communication with vendors of computer graphics equipment. (HM)

  14. Miscellaneous Topics in Computer-Aided Drug Design: Synthetic Accessibility and GPU Computing, and Other Topics

    OpenAIRE

    Fukunishi, Yoshifumi; Mashimo, Tadaaki; Misoo, Kiyotaka; Wakabayashi, Yoshinori; Miyaki, Toshiaki; Ohta, Seiji; Nakamura, Mayu; Ikeda, Kazuyoshi

    2016-01-01

    Abstract: Background Computer-aided drug design is still a state-of-the-art process in medicinal chemistry, and the main topics in this field have been extensively studied and well reviewed. These topics include compound databases, ligand-binding pocket prediction, protein-compound docking, virtual screening, target/off-target prediction, physical property prediction, molecular simulation and pharmacokinetics/pharmacodynamics (PK/PD) prediction. Message and Conclusion: However, there are also...

  15. Computer-Aided Sensor Development Focused on Security Issues.

    Science.gov (United States)

    Bialas, Andrzej

    2016-05-26

    The paper examines intelligent sensor and sensor system development according to the Common Criteria methodology, which is the basic security assurance methodology for IT products and systems. The paper presents how the development process can be supported by software tools, design patterns and knowledge engineering. The automation of this process brings cost-, quality-, and time-related advantages, because the most difficult and most laborious activities are software-supported and the design reusability is growing. The paper includes a short introduction to the Common Criteria methodology and its sensor-related applications. In the experimental section the computer-supported and patterns-based IT security development process is presented using the example of an intelligent methane detection sensor. This process is supported by an ontology-based tool for security modeling and analyses. The verified and justified models are transferred straight to the security target specification representing security requirements for the IT product. The novelty of the paper is to provide a patterns-based and computer-aided methodology for the sensors development with a view to achieving their IT security assurance. The paper summarizes the validation experiment focused on this methodology adapted for the sensors system development, and presents directions of future research.

  16. Computer-Aided Design of Nanocapsules for Therapeutic Delivery

    Directory of Open Access Journals (Sweden)

    Zeina Shreif

    2009-01-01

    Full Text Available The design of nanocapsules for targeted delivery of therapeutics presents many, often seemingly self-contradictory, constraints. An algorithm for predicting the physico-chemical characteristics of nanocapsule delivery and payload release using a novel all-atom, multiscale technique is presented. This computational method preserves key atomic-scale behaviours needed to make predictions of interactions of functionalized nanocapsules with the cell surface receptors, drug, siRNA, gene or other payload. We show how to introduce a variety of order parameters with distinct character to enable a multiscale analysis of a complex system. The all-atom formulation allows for the use of an interatomic force field, making the approach universal and avoiding recalibration with each new application. Alternatively, key parameters, which minimize the need for calibration, are also identified. Simultaneously, the methodology enables predictions of the supra-nanometer-scale behaviour, such as structural transitions and disassembly of the nanocapsule accompanying timed payload release or due to premature degradation. The final result is a Fokker–Planck equation governing the rate of stochastic payload release and structural changes and migration accompanying it. A novel “salt shaker” effect that underlies fluctuation-enhancement of payload delivery is presented. Prospects for computer-aided design of nanocapsule delivery system are discussed.

  17. Computer aided lung cancer diagnosis with deep learning algorithms

    Science.gov (United States)

    Sun, Wenqing; Zheng, Bin; Qian, Wei

    2016-03-01

    Deep learning is considered as a popular and powerful method in pattern recognition and classification. However, there are not many deep structured applications used in medical imaging diagnosis area, because large dataset is not always available for medical images. In this study we tested the feasibility of using deep learning algorithms for lung cancer diagnosis with the cases from Lung Image Database Consortium (LIDC) database. The nodules on each computed tomography (CT) slice were segmented according to marks provided by the radiologists. After down sampling and rotating we acquired 174412 samples with 52 by 52 pixel each and the corresponding truth files. Three deep learning algorithms were designed and implemented, including Convolutional Neural Network (CNN), Deep Belief Networks (DBNs), Stacked Denoising Autoencoder (SDAE). To compare the performance of deep learning algorithms with traditional computer aided diagnosis (CADx) system, we designed a scheme with 28 image features and support vector machine. The accuracies of CNN, DBNs, and SDAE are 0.7976, 0.8119, and 0.7929, respectively; the accuracy of our designed traditional CADx is 0.7940, which is slightly lower than CNN and DBNs. We also noticed that the mislabeled nodules using DBNs are 4% larger than using traditional CADx, this might be resulting from down sampling process lost some size information of the nodules.

  18. 3D Computer aided treatment planning in endodontics.

    Science.gov (United States)

    van der Meer, Wicher J; Vissink, Arjan; Ng, Yuan Ling; Gulabivala, Kishor

    2016-02-01

    Obliteration of the root canal system due to accelerated dentinogenesis and dystrophic calcification can challenge the achievement of root canal treatment goals. This paper describes the application of 3D digital mapping technology for predictable navigation of obliterated canal systems during root canal treatment to avoid iatrogenic damage of the root. Digital endodontic treatment planning for anterior teeth with severely obliterated root canal systems was accomplished with the aid of computer software, based on cone beam computer tomography (CBCT) scans and intra-oral scans of the dentition. On the basis of these scans, endodontic guides were created for the planned treatment through digital designing and rapid prototyping fabrication. The custom-made guides allowed for an uncomplicated and predictable canal location and management. The method of digital designing and rapid prototyping of endodontic guides allows for reliable and predictable location of root canals of teeth with calcifically metamorphosed root canal systems. The endodontic directional guide facilitates difficult endodontic treatments at little additional cost. Copyright © 2016. Published by Elsevier Ltd.

  19. Fractography of clinically fractured, implant-supported dental computer-aided design and computer-aided manufacturing crowns.

    Science.gov (United States)

    Lohbauer, Ulrich; Belli, Renan; Cune, Marco S; Schepke, Ulf

    2017-01-01

    Today, a substantial part of the dental crown production uses computer-aided design and computer-aided manufacturing (CAD/CAM) technology. A recent step in restorative dentistry is the replacement of natural tooth structure with pre-polymerized and machined resin-based methacrylic polymers. Recently, a new CAD/CAM composite was launched for the crown indication in the load-bearing area, but the clinical reality forced the manufacturer to withdraw this specific indication. In parallel, a randomized clinical trial of CAD/CAM composite crowns luted on zirconia implant abutments revealed a high incidence of failure within the first year of service. Fractured crowns of this clinical trial were retrieved and submitted to a fractographic examination. The aim of the case series presented in this article was to identify failure reasons for a new type of CAD/CAM composite crown material (Lava Ultimate; 3M Oral Care, St. Paul, Minnesota, USA) via fractographic examinations and analytical assessment of luting surfaces and water absorption behavior. As a result, the debonding of the composite crowns from the zirconia implant abutments was identified as the central reason for failure. The adhesive interface was found the weakest link. A lack of silica at the zirconia surface certainly has compromised the bonding potential of the adhesive system from the beginning. Additionally, the hydrolytic stress released from swelling of the resin-based crown (water absorption) and transfer to the luting interface further added to the interfacial stress and most probably contributed to a great extend to the debonding failure.

  20. Development of computer-aided auto-ranging technique for a computed radiography system

    International Nuclear Information System (INIS)

    Ishida, M.; Shimura, K.; Nakajima, N.; Kato, H.

    1988-01-01

    For a computed radiography system, the authors developed a computer-aided autoranging technique in which the clinically useful image data are automatically mapped to the available display range. The preread image data are inspected to determine the location of collimation. A histogram of the pixels inside the collimation is evaluated regarding characteristic values such as maxima and minima, and then the optimal density and contrast are derived for the display image. The effect of the autoranging technique was investigated at several hospitals in Japan. The average rate of films lost due to undesirable density or contrast was about 0.5%

  1. Influence of different luting protocols on shear bond strength of computer aided design/computer aided manufacturing resin nanoceramic material to dentin

    OpenAIRE

    Claudio Poggio; Marco Pigozzo; Matteo Ceci; Andrea Scribante; Riccardo Beltrami; Marco Chiesa

    2016-01-01

    Background: The purpose of this study was to evaluate the influence of three different luting protocols on shear bond strength of computer aided design/computer aided manufacturing (CAD/CAM) resin nanoceramic (RNC) material to dentin. Materials and Methods: In this in vitro study, 30 disks were milled from RNC blocks (Lava Ultimate/3M ESPE) with CAD/CAM technology. The disks were subsequently cemented to the exposed dentin of 30 recently extracted bovine permanent mandibular incisors. The...

  2. Computer-aided system for interactive psychomotor testing

    Science.gov (United States)

    Selivanova, Karina G.; Ignashchuk, Olena V.; Koval, Leonid G.; Kilivnik, Volodymyr S.; Zlepko, Alexandra S.; Sawicki, Daniel; Kalizhanova, Aliya; Zhanpeisova, Aizhan; Smailova, Saule

    2017-08-01

    Nowadays research of psychomotor actions has taken a special place in education, sports, medicine, psychology etc. Development of computer system for psychomotor testing could help solve many operational problems in psychoneurology and psychophysiology and also determine the individual characteristics of fine motor skills. This is particularly relevant issue when it comes to children, students, athletes for definition of personal and professional features. The article presents the dynamics of a developing psychomotor skills and application in the training process of means. The results of testing indicated their significant impact on psychomotor skills development.

  3. The need for first aid education for adolescents.

    Science.gov (United States)

    Mohd Sharif, Nur Amirah; Che Hasan, Muhammad Kamil; Che Jamaludin, Farrah Ilyani; Zul Hasymi Firdaus, Mohd Khairul

    2018-02-01

    The objective of this study is to identify the need for basic first aid knowledge and skills among adolescents. A cross-sectional study using multistage sampling was conducted among 375 secondary school students in Kuantan, Pahang, Malaysia. The survey was adapted from a Hong Kong Red Cross survey. A back to back translation of this instrument was carried out by two bilingual medical experts with Cronbach's alpha 0.8. The data were analyzed using SPSS (Statistical Package for the Social Sciences) in terms of descriptive analysis, and an independent t-test and chi-square test were carried out. There were 149 respondents from the lower form (grade level) and 226 respondents from the upper form. The majority of respondents (81.6%) were Malay. An independent t-test revealed a significant association between knowledge and attitude, as students who scored higher on first aid questions showed a more positive attitude towards first aid (1.475%). There were also significant associations between race and experience learning first aid. Adolescents receive minimal first aid education. Thus, there is an urgent need to educate adolescents more in first aid to promote a safer community and to prevent any further injuries. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.

  4. Design and Implementation of 3 Axis CNC Router for Computer Aided Manufacturing Courses

    Directory of Open Access Journals (Sweden)

    Aktan Mehmet Emin

    2016-01-01

    Full Text Available In this paper, it is intended to make the mechanical design of 3 axis Computer Numerical Control (CNC router with linear joints, production of electronic control interface cards and drivers and manufacturing of CNC router system which is a combination of mechanics and electronics. At the same time, interface program has been prepared to control router via USB. The router was developed for educational purpose. In some vocational schools and universities, Computer Aided Manufacturing (CAM courses are though rather theoretical. This situation cause ineffective and temporary learning. Moreover, students at schools which have the opportunity to apply for these systems can face with various dangerous accidents. Because of this situation, these students start to get knowledge about this system for the first time. For the first steps of CNC education, using smaller and less dangerous systems will be easier. A new concept CNC machine and its user interface suitable and profitable for education have been completely designed and realized during this study. To test the validity of the hypothesis which the benefits that may exist on the educational life, enhanced traditional education method with the contribution of the designed machine has been practiced on CAM course students for a semester. At the end of the semester, the new method applied students were more successful in the rate of 27.36 percent both in terms of verbal comprehension and exam grades.

  5. The role of video in health education on HIV / AIDS.

    Science.gov (United States)

    Dijkstra, R

    1996-01-01

    Films and videos have been used by priests for many years to reach thousands of village people. The films are often dubbed in the local language or a commentator explains the scenes. Films have also been made and distributed about AIDS. Bukumbi Hospital used those films created in Tanzania to educate its personnel when the AIDS Committee was established in 1990. The hospital then took its health education sessions to villages and nearby institutions. When the AIDS Committee had access to video, it was usually used during the second visit to a community after the committee had already held a health education session with the local choir. While video can attract many people for meetings, it can also show an AIDS patient, his feelings, and the feelings of relatives. Videos can also directly teach viewers how to use condoms. Local applications, generating participation, and interactive health promotion are discussed. The AIDS Committee at Bukumbi Hospital has also produced its own experimental interactive video, focusing upon sexual attitudes and behavior.

  6. Computer-Presented Organizational/Memory Aids as Instruction for Solving Pico-Fomi Problems.

    Science.gov (United States)

    Steinberg, Esther R.; And Others

    1985-01-01

    Describes investigation of effectiveness of computer-presented organizational/memory aids (matrix and verbal charts controlled by computer or learner) as instructional technique for solving Pico-Fomi problems, and the acquisition of deductive inference rules when such aids are present. Results indicate chart use control should be adapted to…

  7. ASSESSMENT OF BONE AGES BY THE TANNER-WHITEHOUSE METHOD USING A COMPUTER-AIDED SYSTEM

    NARCIS (Netherlands)

    DRAYER, NM; COX, LA

    1994-01-01

    A computer-aided system to estimate bone age based on Fourier analysis was assessed by reference to the original radiographs used to produce the Tanner-Whitehouse 2 (TW2) standards for the radius, ulna and short finger bones. The computer-aided system involved matching a template of each bone to the

  8. Computer-aided diagnosis: how to move from the laboratory to the clinic

    NARCIS (Netherlands)

    van Ginneken, Bram; Schaefer-Prokop, Cornelia M.; Prokop, Mathias

    2011-01-01

    Computer-aided diagnosis (CAD), encompassing computer-aided detection and quantification, is an established and rapidly growing field of research. In daily practice, however, most radiologists do not yet use CAD routinely. This article discusses how to move CAD from the laboratory to the clinic. The

  9. Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

    Science.gov (United States)

    Gosman, A. D.; And Others

    1979-01-01

    Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

  10. Computer-aided Diagnosis: How to Move from the Laboratory to the Clinic.

    NARCIS (Netherlands)

    Ginneken, B. van; Schaefer-Prokop, C.M.; Prokop, M.

    2011-01-01

    Computer-aided diagnosis (CAD), encompassing computer-aided detection and quantification, is an established and rapidly growing field of research. In daily practice, however, most radiologists do not yet use CAD routinely. This article discusses how to move CAD from the laboratory to the clinic. The

  11. The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

    Science.gov (United States)

    Kösa, Temel; Karakus, Fatih

    2018-01-01

    The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

  12. Computer-Aided Interval Change Analysis of Microcalifications on Management for Breast Cancer Detection

    Science.gov (United States)

    2006-07-01

    of Microcalcifications on Mammograms for Breast Cancer Detection PRINCIPAL INVESTIGATOR: Lubomir Hadjiiski, Ph.D...Computer-Aided Interval Change Analysis of Microcalcifications on Mammograms for 5a. CONTRACT NUMBER Breast Cancer Detection 5b. GRANT NUMBER DAMD17...CAD(p=0.04). 15. SUBJECT TERMS Breast Cancer , Computer-aided diagnosis, Screening, Classification, Image Analysis 16. SECURITY CLASSIFICATION OF

  13. Computer Aided Design of a Low-Cost Painting Robot

    Directory of Open Access Journals (Sweden)

    SYEDA MARIA KHATOON ZAIDI

    2017-10-01

    Full Text Available The application of robots or robotic systems for painting parts is becoming increasingly conventional; to improve reliability, productivity, consistency and to decrease waste. However, in Pakistan only highend Industries are able to afford the luxury of a robotic system for various purposes. In this study we propose an economical Painting Robot that a small-scale industry can install in their plant with ease. The importance of this robot is that being cost effective, it can easily be replaced in small manufacturing industries and therefore, eliminate health problems occurring to the individual in charge of painting parts on an everyday basis. To achieve this aim, the robot is made with local parts with only few exceptions, to cut costs; and the programming language is kept at a mediocre level. Image processing is used to establish object recognition and it can be programmed to paint various simple geometries. The robot is placed on a conveyer belt to maximize productivity. A four DoF (Degree of Freedom arm increases the working envelope and accessibility of painting different shaped parts with ease. This robot is capable of painting up, front, back, left and right sides of the part with a single colour. Initially CAD (Computer Aided Design models of the robot were developed which were analyzed, modified and improved to withstand loading condition and perform its task efficiently. After design selection, appropriate motors and materials were selected and the robot was developed. Throughout the development phase, minor problems and errors were fixed accordingly as they arose. Lastly the robot was integrated with the computer and image processing for autonomous control. The final results demonstrated that the robot is economical and reduces paint wastage.

  14. Computer-Aided Construction of Chemical Kinetic Models

    Energy Technology Data Exchange (ETDEWEB)

    Green, William H. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2014-12-31

    The combustion chemistry of even simple fuels can be extremely complex, involving hundreds or thousands of kinetically significant species. The most reasonable way to deal with this complexity is to use a computer not only to numerically solve the kinetic model, but also to construct the kinetic model in the first place. Because these large models contain so many numerical parameters (e.g. rate coefficients, thermochemistry) one never has sufficient data to uniquely determine them all experimentally. Instead one must work in “predictive” mode, using theoretical rather than experimental values for many of the numbers in the model, and as appropriate refining the most sensitive numbers through experiments. Predictive chemical kinetics is exactly what is needed for computer-aided design of combustion systems based on proposed alternative fuels, particularly for early assessment of the value and viability of proposed new fuels before those fuels are commercially available. This project was aimed at making accurate predictive chemical kinetics practical; this is a challenging goal which requires a range of science advances. The project spanned a wide range from quantum chemical calculations on individual molecules and elementary-step reactions, through the development of improved rate/thermo calculation procedures, the creation of algorithms and software for constructing and solving kinetic simulations, the invention of methods for model-reduction while maintaining error control, and finally comparisons with experiment. Many of the parameters in the models were derived from quantum chemistry calculations, and the models were compared with experimental data measured in our lab or in collaboration with others.

  15. Computer aided design of a low-cost painting robot

    International Nuclear Information System (INIS)

    Zaidi, S.M.; Janejo, F.; Mujtaba, S.B.

    2017-01-01

    The application of robots or robotic systems for painting parts is becoming increasingly conventional; to improve reliability, productivity, consistency and to decrease waste. However, in Pakistan only highend Industries are able to afford the luxury of a robotic system for various purposes. In this study we propose an economical Painting Robot that a small-scale industry can install in their plant with ease. The importance of this robot is that being cost effective, it can easily be replaced in small manufacturing industries and therefore, eliminate health problems occurring to the individual in charge of painting parts on an everyday basis. To achieve this aim, the robot is made with local parts with only few exceptions, to cut costs; and the programming language is kept at a mediocre level. Image processing is used to establish object recognition and it can be programmed to paint various simple geometries. The robot is placed on a conveyer belt to maximize productivity. A four DoF (Degree of Freedom) arm increases the working envelope and accessibility of painting different shaped parts with ease. This robot is capable of painting up, front, back, left and right sides of the part with a single colour. Initially CAD (Computer Aided Design) models of the robot were developed which were analyzed, modified and improved to withstand loading condition and perform its task efficiently. After design selection, appropriate motors and materials were selected and the robot was developed. Throughout the development phase, minor problems and errors were fixed accordingly as they arose. Lastly the robot was integrated with the computer and image processing for autonomous control. The final results demonstrated that the robot is economical and reduces paint wastage. (author)

  16. Efficacy of computer-aided detection system for screening mammography

    International Nuclear Information System (INIS)

    Saito, Mioko; Ohnuki, Koji; Yamada, Takayuki; Saito, Haruo; Ishibashi, Tadashi; Ohuchi, Noriaki; Takahashi, Shoki

    2002-01-01

    A study was conducted to evaluate the efficacy of a computer-aided detection (CAD) system for screening mammography (MMG). Screening mammograms of 2,231 women aged over 50 yr were examined. Medio-lateral oblique (MLO) images were obtained, and two expert observers interpreted the mammograms by consensus. First, each mammogram was interpreted without the assistance of CAD, followed immediately by a re-evaluation of areas marked by the CAD system. Data were recorded to measure the effect of CAD on the recall rate, cancer detection rate and detection rate of masses, microcalcifications and other findings. The CAD system increased the recall rate from 2.3% to 2.6%. Six recalled cases were diagnosed as breast cancer pathologically, and CAD detected all of these lesions. Seven additional cases in which CAD detected abnormal findings had no malignancy. The detection rate of CAD for microcalcifications was high (95.0%). However, the detection rate for mass lesions and other findings was low (29.2% and 25.0% respectively). The false positivity rate was 0.13/film for microcalcifications, and 0.25/film for mass lesions. The efficacy of the CAD system for detecting microcalcifications on screening mammograms was confirmed. However, the low detection rate of mass lesions and relatively high rate of false positivity need to be further improved. (author)

  17. ARCHITECTURE OF WEB BASED COMPUTER-AIDED MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    N. E. Filyukov

    2014-09-01

    Full Text Available The paper deals with design of a web-based system for Computer-Aided Manufacturing (CAM. Remote applications and databases located in the "private cloud" are proposed to be the basis of such system. The suggested approach contains: service - oriented architecture, using web applications and web services as modules, multi-agent technologies for implementation of information exchange functions between the components of the system and the usage of PDM - system for managing technology projects within the CAM. The proposed architecture involves CAM conversion into the corporate information system that will provide coordinated functioning of subsystems based on a common information space, as well as parallelize collective work on technology projects and be able to provide effective control of production planning. A system has been developed within this architecture which gives the possibility for a rather simple technological subsystems connect to the system and implementation of their interaction. The system makes it possible to produce CAM configuration for a particular company on the set of developed subsystems and databases specifying appropriate access rights for employees of the company. The proposed approach simplifies maintenance of software and information support for CAM subsystems due to their central location in the data center. The results can be used as a basis for CAM design and testing within the learning process for development and modernization of the system algorithms, and then can be tested in the extended enterprise.

  18. Computer aided detection system for micro calcifications in digital mammograms.

    Science.gov (United States)

    Mohamed, Hayat; Mabrouk, Mai S; Sharawy, Amr

    2014-10-01

    Breast cancer continues to be a significant public health problem in the world. Early detection is the key for improving breast cancer prognosis. Mammogram breast X-ray is considered the most reliable method in early detection of breast cancer. However, it is difficult for radiologists to provide both accurate and uniform evaluation for the enormous mammograms generated in widespread screening. Micro calcification clusters (MCCs) and masses are the two most important signs for the breast cancer, and their automated detection is very valuable for early breast cancer diagnosis. The main objective is to discuss the computer-aided detection system that has been proposed to assist the radiologists in detecting the specific abnormalities and improving the diagnostic accuracy in making the diagnostic decisions by applying techniques splits into three-steps procedure beginning with enhancement by using Histogram equalization (HE) and Morphological Enhancement, followed by segmentation based on Otsu's threshold the region of interest for the identification of micro calcifications and mass lesions, and at last classification stage, which classify between normal and micro calcifications 'patterns and then classify between benign and malignant micro calcifications. In classification stage; three methods were used, the voting K-Nearest Neighbor classifier (K-NN) with prediction accuracy of 73%, Support Vector Machine classifier (SVM) with prediction accuracy of 83%, and Artificial Neural Network classifier (ANN) with prediction accuracy of 77%. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  19. Bone tissue engineering scaffolding: computer-aided scaffolding techniques.

    Science.gov (United States)

    Thavornyutikarn, Boonlom; Chantarapanich, Nattapon; Sitthiseripratip, Kriskrai; Thouas, George A; Chen, Qizhi

    Tissue engineering is essentially a technique for imitating nature. Natural tissues consist of three components: cells, signalling systems (e.g. growth factors) and extracellular matrix (ECM). The ECM forms a scaffold for its cells. Hence, the engineered tissue construct is an artificial scaffold populated with living cells and signalling molecules. A huge effort has been invested in bone tissue engineering, in which a highly porous scaffold plays a critical role in guiding bone and vascular tissue growth and regeneration in three dimensions. In the last two decades, numerous scaffolding techniques have been developed to fabricate highly interconnective, porous scaffolds for bone tissue engineering applications. This review provides an update on the progress of foaming technology of biomaterials, with a special attention being focused on computer-aided manufacturing (Andrade et al. 2002) techniques. This article starts with a brief introduction of tissue engineering (Bone tissue engineering and scaffolds) and scaffolding materials (Biomaterials used in bone tissue engineering). After a brief reviews on conventional scaffolding techniques (Conventional scaffolding techniques), a number of CAM techniques are reviewed in great detail. For each technique, the structure and mechanical integrity of fabricated scaffolds are discussed in detail. Finally, the advantaged and disadvantage of these techniques are compared (Comparison of scaffolding techniques) and summarised (Summary).

  20. Computer Aided Diagnosis System for Early Lung Cancer Detection

    Directory of Open Access Journals (Sweden)

    Fatma Taher

    2015-11-01

    Full Text Available Lung cancer continues to rank as the leading cause of cancer deaths worldwide. One of the most promising techniques for early detection of cancerous cells relies on sputum cell analysis. This was the motivation behind the design and the development of a new computer aided diagnosis (CAD system for early detection of lung cancer based on the analysis of sputum color images. The proposed CAD system encompasses four main processing steps. First is the preprocessing step which utilizes a Bayesian classification method using histogram analysis. Then, in the second step, mean shift segmentation is applied to segment the nuclei from the cytoplasm. The third step is the feature analysis. In this step, geometric and chromatic features are extracted from the nucleus region. These features are used in the diagnostic process of the sputum images. Finally, the diagnosis is completed using an artificial neural network and support vector machine (SVM for classifying the cells into benign or malignant. The performance of the system was analyzed based on different criteria such as sensitivity, specificity and accuracy. The evaluation was carried out using Receiver Operating Characteristic (ROC curve. The experimental results demonstrate the efficiency of the SVM classifier over other classifiers, with 97% sensitivity and accuracy as well as a significant reduction in the number of false positive and false negative rates.

  1. Computer-aided pattern classification system for dermoscopy images.

    Science.gov (United States)

    Abbas, Qaisar; Celebi, M Emre; Fondón, Irene

    2012-08-01

    Computer-aided pattern classification of melanoma and other pigmented skin lesions is one of the most important tasks for clinical diagnosis. To differentiate between benign and malignant lesions, the extraction of color, architectural order, symmetry of pattern and homogeneity (CASH) is a challenging task. In this article, a novel pattern classification system (PCS) based on the clinical CASH rule is presented to classify among six classes of patterns. The PCS system consists of the following five steps: transformation to the CIE L*a*b* color space, pre-processing to enhance the tumor region and removal of hairs, tumor-area segmentation, color and texture feature extraction, and finally, classification based on a multiclass support vector machine. The PCS system is tested on a total of 180 dermoscopic images. To test the performance of the PCS diagnostic classifier, the area under the receiver operating characteristics curve (AUC) is utilized. The proposed classifier achieved a sensitivity of 91.64%, specificity of 94.14%, and AUC of 0.948. The experimental results demonstrate that the proposed pattern classifier is highly accurate and classify between benign and malignant lesions into some extend. The PCS method is fully automatic and can accurately detect different patterns from dermoscopy images using color and texture properties. Additional pattern features can be included to investigate the impact of pattern classification based on the CASH rule. © 2011 John Wiley & Sons A/S.

  2. Computer-aided decision system for the clubfeet deformities.

    Science.gov (United States)

    Dao, Tien Tuan; Marin, Frédéric; Bensahel, Henri; Ho Ba Tho, Marie Christine

    2011-01-01

    A computer-aided decision system (CADS) based on ontology in pediatric orthopedics was developed to assess, without assumptions performed, the abnormalities of the musculoskeletal system of lower limbs. The CADS consists of four components. The first component is a diagnosis-based ontology, called Ontologie du Système Musculosquelettique des Membres Inférieurs (OSMMI). The second component is a database for collecting clinical observations, e.g., the birth classification of the clubfeet deformities. The third component uses statistical methods (principal component analysis and decision tree) for constructing an approach to evaluate new issues. The last component is an interactive module for managing the interaction between patients, experts, and the due CADS. Our system has been validated clinically with the real patient data obtained from the Infant Surgery Service in the hospital of Robert Debré in Paris. Our CADS is a good solution to compare the studies of the clubfeet deformities before and after the treatment using a universally scoring system. The assessment, conservative treatment, and monitoring were set up. Our system was developed to allow a better assessment for improving the knowledge and thus the evaluation and treatment of the musculoskeletal pathologies, e.g., the clubfeet deformities.

  3. Computer-aided photometric analysis of dynamic digital bioluminescent images

    Science.gov (United States)

    Gorski, Zbigniew; Bembnista, T.; Floryszak-Wieczorek, J.; Domanski, Marek; Slawinski, Janusz

    2003-04-01

    The paper deals with photometric and morphologic analysis of bioluminescent images obtained by registration of light radiated directly from some plant objects. Registration of images obtained from ultra-weak light sources by the single photon counting (SPC) technique is the subject of this work. The radiation is registered by use of a 16-bit charge coupled device (CCD) camera "Night Owl" together with WinLight EG&G Berthold software. Additional application-specific software has been developed in order to deal with objects that are changing during the exposition time. Advantages of the elaborated set of easy configurable tools named FCT for a computer-aided photometric and morphologic analysis of numerous series of quantitatively imperfect chemiluminescent images are described. Instructions are given how to use these tools and exemplified with several algorithms for the transformation of images library. Using the proposed FCT set, automatic photometric and morphologic analysis of the information hidden within series of chemiluminescent images reflecting defensive processes in poinsettia (Euphorbia pulcherrima Willd) leaves affected by a pathogenic fungus Botrytis cinerea is revealed.

  4. COMPUTER-AIDED DETECTION OF ACINAR SHADOWS IN CHEST RADIOGRAPHS

    Directory of Open Access Journals (Sweden)

    Tao Xu

    2013-05-01

    Full Text Available Despite the technological advances in medical diagnosis, accurate detection of infectious tuberculosis (TB still poses challenges due to complex image features and thus infectious TB continues to be a public health problem of global proportions. Currently, the detection of TB is mainly conducted visually by radiologists examining chest radiographs (CXRs. To reduce the backlog of CXR examination and provide more precise quantitative assessment, computer-aided detection (CAD systems for potential lung lesions have been increasingly adopted and commercialized for clinical practice. CADs work as supporting tools to alert radiologists on suspected features that could have easily been neglected. In this paper, an effective CAD system aimed for acinar shadow regions detection in CXRs is proposed. This system exploits textural and photometric features analysis techniques which include local binary pattern (LBP, grey level co-occurrence matrix (GLCM and histogram of oriented gradients (HOG to analyze target regions in CXRs. Classification of acinar shadows using Adaboost is then deployed to verify the performance of a combination of these techniques. Comparative study in different image databases shows that the proposed CAD system delivers consistent high accuracy in detecting acinar shadows.

  5. [Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

    Science.gov (United States)

    Wei, Xuelei; Dong, Fuhui

    2011-12-01

    To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

  6. Computer aided instrumented Charpy test applied dynamic fracture toughness evaluation system

    International Nuclear Information System (INIS)

    Kobayashi, Toshiro; Niinomi, Mitsuo

    1986-01-01

    Micro computer aided data treatment system and personal computer aided data analysis system were applied to the traditional instrumented Charpy impact test system. The analysis of Charpy absorbed energy (E i , E p , E t ) and load (P y , P m ), and the evaluation of dynamic toughness through whole fracture process, i.e. J Id , J R curve and T mat was examined using newly developed computer aided instrumented Charpy impact test system. E i , E p , E t , P y and P m were effectively analyzed using moving average method and printed out automatically by micro computer aided data treatment system. J Id , J R curve and T mat could be measured by stop block test method. Then, J Id , J R curve and T mat were effectively estimated using compliance changing rate method and key curve method on the load-load point displacement curve of single fatigue cracked specimen by personal computer aided data analysis system. (author)

  7. AIDS education in schools - awareness, attitudes and opinions ...

    African Journals Online (AJOL)

    AIDS education must be multi-faceted, providing factu- al information, encouraging appropriate general and ... behind this approach may already be in place given that a required component of 'general teacher' training is .... sociological 25%; (iv) psychological 8%; and (v) eco- nomic 1%. There was a difference of opinion ...

  8. Constructing Identities through Literacy Events in HIV/AIDS Education

    Science.gov (United States)

    Higgins, Christina

    2014-01-01

    This article examines the literacy events in HIV/AIDS education in Tanzania to investigate how they construct social identities for participants and to what extent they provide opportunities for critical health literacies. The projects took place as collaborative research partnerships with local Tanzanian NGOs in an effort to analyse and improve…

  9. Parents' Perceptions of HIV and AIDS Education among their ...

    African Journals Online (AJOL)

    The study sought to establish Zimbabwean parents' views on HIV and AIDS Education among their children attending secondary schools in Masvingo. A qualitative design was used. An open ended questionnaire was used to collect data from twenty conveniently selected parents with children attending secondary schools ...

  10. HIV/AIDS--An Issue in Nurse Education.

    Science.gov (United States)

    Martin, Geoffrey W.

    1995-01-01

    A survey found that many of British nurses (n=717) had inadequate knowledge and attitudes about people with AIDS. Educational programs should include the following content: attitudes/stereotypes, safer sex and infection control, confidentiality, epidemiology and statistics, and signs, symptoms, and progression of the syndrome. (SK)

  11. Smarter Spending: Reforming Federal Financial Aid for Higher Education

    Science.gov (United States)

    Gillen, Andrew

    2011-01-01

    In higher education, three generally recognized rationales for federal involvement in financial aid exist: (1) Promoting equality of opportunity: Those from poor households are less likely to attend college for a variety of reasons; (2) Credit market imperfections: Students may not have access to the credit needed to make profitable investments in…

  12. HIV/AIDS prevention through peer education and support in ...

    African Journals Online (AJOL)

    The implementation and evaluation of a peer education and support programme in secondary schools to prevent and reduce high-risk sexual behaviour amongst adolescents is discussed.The aims of the programme were to provide accurate information about HIV/AIDS, discuss and reconsider peer group norms, and ...

  13. Fracture resistance of computer-aided design and computer-aided manufacturing ceramic crowns cemented on solid abutments.

    Science.gov (United States)

    Stona, Deborah; Burnett, Luiz Henrique; Mota, Eduardo Gonçalves; Spohr, Ana Maria

    2015-07-01

    Because no information was found in the dental literature regarding the fracture resistance of all-ceramic crowns using CEREC (Sirona) computer-aided design and computer-aided manufacturing (CAD-CAM) system on solid abutments, the authors conducted a study. Sixty synOcta (Straumann) implant replicas and regular neck solid abutments were embedded in acrylic resin and randomly assigned (n = 20 per group). Three types of ceramics were used: feldspathic, CEREC VITABLOCS Mark II (VITA); leucite, IPS Empress CAD (Ivoclar Vivadent); and lithium disilicate, IPS e.max CAD (Ivoclar Vivadent). The crowns were fabricated by the CEREC CAD-CAM system. After receiving glaze, the crowns were cemented with RelyX U200 (3M ESPE) resin cement under load of 1 kilogram. For each ceramic, one-half of the specimens were subjected to the fracture resistance testing in a universal testing machine with a crosshead speed of 1 millimeter per minute, and the other half were subjected to the fractured resistance testing after 1,000,000 cyclic fatigue loading at 100 newtons. According to a 2-way analysis of variance, the interaction between the material and mechanical cycling was significant (P = .0001). According to a Tukey test (α = .05), the fracture resistance findings with or without cyclic fatigue loading were as follows, respectively: CEREC VITABLOCKS Mark II (405 N/454 N) was statistically lower than IPS Empress CAD (1169 N/1240 N) and IPS e.max CAD (1378 N/1025 N) (P  .05). According to a t test, there was no statistical difference in the fracture resistance with and without cyclic fatigue loading for CEREC VITABLOCS Mark II and IPS Empress CAD (P > .05). For IPS e.max CAD, the fracture resistance without cyclic fatigue loading was statistically superior to that obtained with cyclic fatigue loading (P crowns cemented on solid abutments showed sufficient resistance to withstand normal chewing forces. Copyright © 2015 American Dental Association. Published by Elsevier Inc. All

  14. Marginal accuracy of computer-aided design- and computer-aided manufacturing-fabricated full-arch zirconia restoration

    Directory of Open Access Journals (Sweden)

    Juntavee N

    2018-02-01

    Full Text Available Niwut Juntavee,1 Issarawas Sirisathit2 1Department of Prosthodontics, 2Division of Biomaterials and Prosthodontics Research, Faculty of Dentistry, Khon Kaen University, Khon Kaen, Thailand Objective: This study evaluated marginal accuracy of full-arch zirconia restoration fabricated from two digital computer-aided design and computer-aided manufacturing (CAD-CAM systems (Trios-3 and CS3500 in comparison to conventional cast metal restoration. Materials and methods: A stainless steel model comprising two canine and two molar abutments was used as a master model for full-arch reconstruction. The canine and molar abutments were machined in a cylindrical shape with 5° taper and chamfer margin. The CAD-CAM systems based on the digital approach were used to construct the full-arch zirconia restoration. The conventional cast metal restoration was fabricated according to a conventional lost-wax technique using nickel–chromium alloys. Ten restorations were fabricated from each system. The marginal accuracy of each restoration was determined at four locations for each abutment. An analysis of variance (ANOVA and Tukey’s honest significant difference (HSD multiple comparisons were used to determine statistically significant difference at 95% confidence interval. Results: The mean values of marginal accuracy of restorations fabricated from conventional casting, Trios-3, and CS3500 were 48.59±4.16 μm, 53.50±5.66 μm, and 56.47±5.52 μm, respectively. ANOVA indicated significant difference in marginal fit of restorations among various systems. The marginal discrepancy of zirconia restoration fabricated from the CS3500 system demonstrated significantly larger gap than that fabricated from the 3Shape system (p<0.05. Tukey’s HSD multiple comparisons indicated that the zirconia restoration fabricated from either CS3500 or Trios-3 demonstrated a significantly larger marginal gap than the conventional cast metal restoration (p<0.05. Conclusion: Full

  15. The Virtual Computer: A New Paradigm for Educational Computing.

    Science.gov (United States)

    Sawyer, W. D. M.

    1992-01-01

    Describes virtual personal computing, a computer-based educational infrastructure for all students from kindergarten through college, as a step toward meeting national educational goals. New technologies that make this concept possible are described, including the Asymmetric Digital Subscriber Line (ADSL); and the theoretical basis of the virtual…

  16. Teacher Educators' Attitude towards Computer: Perspective Bangladesh

    Science.gov (United States)

    Rahman, Mohammad Ataur

    2011-01-01

    This study examined how teacher educators perceive the attitude towards use of computer technology in Teachers' Training Colleges in Bangladesh. This study investigated teacher educators' computer attitudes by using the valid and reliable instruments of Loyd and Gressard's (1984) Computer Attitude Scale (CAS). The data was collected through …

  17. Preparing Future Secondary Computer Science Educators

    Science.gov (United States)

    Ajwa, Iyad

    2007-01-01

    Although nearly every college offers a major in computer science, many computer science teachers at the secondary level have received little formal training. This paper presents details of a project that could make a significant contribution to national efforts to improve computer science education by combining teacher education and professional…

  18. AIDS and sex education for young people in China.

    Science.gov (United States)

    Gao, Y; Lu, Z Z; Shi, R; Sun, X Y; Cai, Y

    2001-01-01

    Although China has had a rich sexual culture for thousands of years, Chinese people are usually unwilling to openly discuss issues of sex. Some parents are quite ignorant of the change in their children's sexual attitude and behaviour. In China today, adolescents are becoming much more sexually liberated. Premarital sex and unplanned pregnancies among teenagers are increasing. Sexually transmitted diseases (STD) including HIV/AIDS are also spreading rapidly. However, young people lack basic information on AIDS/STD and do not know how to protect themselves from these diseases or how to avoid unintended pregnancies. Several major youth peer education programmes in China are mentioned in this paper. Among them, a four-year programme entitled the Australian-Chinese AIDS/STD/Safer Sex Peer Education Programme for Youth, is discussed in some detail. The programme has so far reached over 40000 university and school students. Evaluation results show that the programme is effective in both significantly increasing students' knowledge about AIDS/STDs and changing their attitude towards AIDS patients. In addition, the programme is highly praised by the students.

  19. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Chul [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2011-10-15

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water

  20. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    International Nuclear Information System (INIS)

    Kim, Hyun Chul

    2011-01-01

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water reactor power plants

  1. Mobile computing in medical education: opportunities and challenges.

    Science.gov (United States)

    Chu, Larry F; Erlendson, Matthew J; Sun, John S; Alva, Heather L; Clemenson, Anna M

    2012-12-01

    There is an increasing importance of incorporating mobile computing into the academic medical environment. A growing majority of physicians, residents and medical students currently use mobile devices for education, access to clinical information and to facilitate bedside care. Therefore, it is important to assess the current opportunities and challenges in the use of mobile computing devices in the academic medical environment. Current research has found that a majority of physicians, residents and medical students either own or use mobile devices. In addition, studies have shown that these devices are effective as educational tools, resource guides and aids in patient care. Although there are opportunities for medical education, issues of deployment must still be addressed, such as privacy, connectivity, standardization and professionalism. Understanding the opportunities and challenges of using mobile computing devices in the academic medical environment can help determine the feasibility and benefits of their use for individuals and institutions.

  2. Computer-aided pulmonary image analysis in small animal models

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Ziyue; Mansoor, Awais; Mollura, Daniel J. [Center for Infectious Disease Imaging (CIDI), Radiology and Imaging Sciences, National Institutes of Health (NIH), Bethesda, Maryland 32892 (United States); Bagci, Ulas, E-mail: ulasbagci@gmail.com [Center for Research in Computer Vision (CRCV), University of Central Florida (UCF), Orlando, Florida 32816 (United States); Kramer-Marek, Gabriela [The Institute of Cancer Research, London SW7 3RP (United Kingdom); Luna, Brian [Microfluidic Laboratory Automation, University of California-Irvine, Irvine, California 92697-2715 (United States); Kubler, Andre [Department of Medicine, Imperial College London, London SW7 2AZ (United Kingdom); Dey, Bappaditya; Jain, Sanjay [Center for Tuberculosis Research, Johns Hopkins University School of Medicine, Baltimore, Maryland 21231 (United States); Foster, Brent [Department of Biomedical Engineering, University of California-Davis, Davis, California 95817 (United States); Papadakis, Georgios Z. [Radiology and Imaging Sciences, National Institutes of Health (NIH), Bethesda, Maryland 32892 (United States); Camp, Jeremy V. [Department of Microbiology and Immunology, University of Louisville, Louisville, Kentucky 40202 (United States); Jonsson, Colleen B. [National Institute for Mathematical and Biological Synthesis, University of Tennessee, Knoxville, Tennessee 37996 (United States); Bishai, William R. [Howard Hughes Medical Institute, Chevy Chase, Maryland 20815 and Center for Tuberculosis Research, Johns Hopkins University School of Medicine, Baltimore, Maryland 21231 (United States); Udupa, Jayaram K. [Medical Image Processing Group, Department of Radiology, University of Pennsylvania, Philadelphia, Pennsylvania 19104 (United States)

    2015-07-15

    Purpose: To develop an automated pulmonary image analysis framework for infectious lung diseases in small animal models. Methods: The authors describe a novel pathological lung and airway segmentation method for small animals. The proposed framework includes identification of abnormal imaging patterns pertaining to infectious lung diseases. First, the authors’ system estimates an expected lung volume by utilizing a regression function between total lung capacity and approximated rib cage volume. A significant difference between the expected lung volume and the initial lung segmentation indicates the presence of severe pathology, and invokes a machine learning based abnormal imaging pattern detection system next. The final stage of the proposed framework is the automatic extraction of airway tree for which new affinity relationships within the fuzzy connectedness image segmentation framework are proposed by combining Hessian and gray-scale morphological reconstruction filters. Results: 133 CT scans were collected from four different studies encompassing a wide spectrum of pulmonary abnormalities pertaining to two commonly used small animal models (ferret and rabbit). Sensitivity and specificity were greater than 90% for pathological lung segmentation (average dice similarity coefficient > 0.9). While qualitative visual assessments of airway tree extraction were performed by the participating expert radiologists, for quantitative evaluation the authors validated the proposed airway extraction method by using publicly available EXACT’09 data set. Conclusions: The authors developed a comprehensive computer-aided pulmonary image analysis framework for preclinical research applications. The proposed framework consists of automatic pathological lung segmentation and accurate airway tree extraction. The framework has high sensitivity and specificity; therefore, it can contribute advances in preclinical research in pulmonary diseases.

  3. Improved mammographic interpretation of masses using computer-aided diagnosis

    International Nuclear Information System (INIS)

    Leichter, I.; Fields, S.; Novak, B.; Nirel, R.; Bamberger, P.; Lederman, R.; Buchbinder, S.

    2000-01-01

    The aim of this study was to evaluate the effectiveness of computerized image enhancement, to investigate criteria for discriminating benign from malignant mammographic findings by computer-aided diagnosis (CAD), and to test the role of quantitative analysis in improving the accuracy of interpretation of mass lesions. Forty sequential mammographically detected mass lesions referred for biopsy were digitized at high resolution for computerized evaluation. A prototype CAD system which included image enhancement algorithms was used for a better visualization of the lesions. Quantitative features which characterize the spiculation were automatically extracted by the CAD system for a user-defined region of interest (ROI). Reference ranges for malignant and benign cases were acquired from data generated by 214 known retrospective cases. The extracted parameters together with the reference ranges were presented to the radiologist for the analysis of 40 prospective cases. A pattern recognition scheme based on discriminant analysis was trained on the 214 retrospective cases, and applied to the prospective cases. Accuracy of interpretation with and without the CAD system, as well as the performance of the pattern recognition scheme, were analyzed using receiver operating characteristics (ROC) curves. A significant difference (p z ) increased significantly (p z for the results of the pattern recognition scheme was higher (0.95). The results indicate that there is an improved accuracy of diagnosis with the use of the mammographic CAD system above that of the unassisted radiologist. Our findings suggest that objective quantitative features extracted from digitized mammographic findings may help in differentiating between benign and malignant masses, and can assist the radiologist in the interpretation of mass lesions. (orig.)

  4. Breast Cancer: Computer-aided Detection with Digital Breast Tomosynthesis.

    Science.gov (United States)

    Morra, Lia; Sacchetto, Daniela; Durando, Manuela; Agliozzo, Silvano; Carbonaro, Luca Alessandro; Delsanto, Silvia; Pesce, Barbara; Persano, Diego; Mariscotti, Giovanna; Marra, Vincenzo; Fonio, Paolo; Bert, Alberto

    2015-10-01

    To evaluate a commercial tomosynthesis computer-aided detection (CAD) system in an independent, multicenter dataset. Diagnostic and screening tomosynthesis mammographic examinations (n = 175; cranial caudal and mediolateral oblique) were randomly selected from a previous institutional review board-approved trial. All subjects gave informed consent. Examinations were performed in three centers and included 123 patients, with 132 biopsy-proven screening-detected cancers, and 52 examinations with negative results at 1-year follow-up. One hundred eleven lesions were masses and/or microcalcifications (72 masses, 22 microcalcifications, 17 masses with microcalcifications) and 21 were architectural distortions. Lesions were annotated by radiologists who were aware of all available reports. CAD performance was assessed as per-lesion sensitivity and false-positive results per volume in patients with negative results. Use of the CAD system showed per-lesion sensitivity of 89% (99 of 111; 95% confidence interval: 81%, 94%), with 2.7 ± 1.8 false-positive rate per view, 62 of 72 lesions detected were masses, 20 of 22 were microcalcification clusters, and 17 of 17 were masses with microcalcifications. Overall, 37 of 39 microcalcification clusters (95% sensitivity, 95% confidence interval: 81%, 99%) and 79 of 89 masses (89% sensitivity, 95% confidence interval: 80%, 94%) were detected with the CAD system. On average, 0.5 false-positive rate per view were microcalcification clusters, 2.1 were masses, and 0.1 were masses and microcalcifications. A digital breast tomosynthesis CAD system can allow detection of a large percentage (89%, 99 of 111) of breast cancers manifesting as masses and microcalcification clusters, with an acceptable false-positive rate (2.7 per breast view). Further studies with larger datasets acquired with equipment from multiple vendors are needed to replicate the findings and to study the interaction of radiologists and CAD systems. (©) RSNA, 2015.

  5. Semiautomatic segmentation for the computer aided diagnosis of clustered microcalcifications

    Science.gov (United States)

    Elter, Matthias; Held, Christian

    2008-03-01

    Screening mammography is recognized as the most effective tool for early breast cancer detection. However, its application in clinical practice shows some of its weaknesses. While clustered microcalcifications are often an early sign of breast cancer, the discrimination of benign from malignant clusters based on their appearance in mammograms is a very difficult task. Hence, it is not surprising that typically only 15% to 30% of breast biopsies performed on calcifications will be positive for malignancy. As this low positive predictive value of mammography regarding the diagnosis of calcification clusters results in many unnecessary biopsies performed on benign calcifications, we propose a novel computer aided diagnosis (CADx) approach with the goal to improve the reliability of microcalcification classification. As effective automatic classification of microcalcification clusters relies on good segmentations of the individual calcification particles, many approaches to the automatic segmentation of individual particles have been proposed in the past. Because none of the fully automatic approaches seem to result in optimal segmentations, we propose a novel semiautomatic approach that has automatic components but also allows some interaction of the radiologist. Based on the resulting segmentations we extract a broad range of features that characterize the morphology and distribution of calcification particles. Using regions of interest containing either benign or malignant clusters extracted from the digital database for screening mammography we evaluate the performance of our approach using a support vector machine and ROC analysis. The resulting ROC performance is very promising and we show that the performance of our semiautomatic segmentation is significantly higher than that of a comparable fully automatic approach.

  6. Computer Aided Design of Polygalacturonase II from Aspergillus niger

    Directory of Open Access Journals (Sweden)

    Ibrahim Ali Noorbatcha

    2011-12-01

    Full Text Available Pectin is a complex polysaccharide found in the cell walls of plants and consisting mainly of esterified D-galacturonic acid resides in α-(1-4 chain. In production of fruit juice, pectin contributes to fruit juice viscosity, thereby reducing the juice production and increasing the filtration time. Polygalacturonase improves the juice production process by rapid degradation of pectin. In this project we have designed a novel polygalacturonase enzyme using computer aided design approaches. The three dimension structure of polygalacturonase is first modeled on the basis of the known crystal structure. The active site in this enzyme is identified by manual and automated docking methods. Lamarckian genetic algorithm is used for automated docking and the active site is validated by comparing with existing experimental data. This is followed by in silico mutations of the enzymes and the automated docking process is repeated using the mutant enzymes. The strength of the binding of the ligands inside the active site is evaluated by computing the binding score using Potential Mean Force (PMF method. The in silico mutations R256Q and K258N are found to decrease the binding strength of the ligand at the active site, indicating lowering of enzyme activity, which is consistent with the experimental results. Hence in silico mutations can be used to design new polygalacturonase enzymes with improved enzyme activity.ABSTRAK: Pektin adalah polisakarida kompleks yang terdapat di dalam dinding sel tumbuhan dan sebahagian besarnya terdiri daripada asid D-galakturonik terester yang ditemui di dalam rantaian α-(1-4. Dalam penghasilan jus buah-buahan, pektin menyumbang dalam kepekatan jus buah-buahan, di mana ia mengurangkan penghasilan jus dan menambahkan masa penapisan. Poligalakturonase meningkatkan proses penghasilan jus dengan pemecahan pektin dengan cepat. Dalam projek ini, kami telah merangka satu enzim poligalakturonase baru dengan menggunakan pendekatan reka

  7. A computer aided treatment event recognition system in radiation therapy

    International Nuclear Information System (INIS)

    Xia, Junyi; Mart, Christopher; Bayouth, John

    2014-01-01

    Purpose: To develop an automated system to safeguard radiation therapy treatments by analyzing electronic treatment records and reporting treatment events. Methods: CATERS (Computer Aided Treatment Event Recognition System) was developed to detect treatment events by retrieving and analyzing electronic treatment records. CATERS is designed to make the treatment monitoring process more efficient by automating the search of the electronic record for possible deviations from physician's intention, such as logical inconsistencies as well as aberrant treatment parameters (e.g., beam energy, dose, table position, prescription change, treatment overrides, etc). Over a 5 month period (July 2012–November 2012), physicists were assisted by the CATERS software in conducting normal weekly chart checks with the aims of (a) determining the relative frequency of particular events in the authors’ clinic and (b) incorporating these checks into the CATERS. During this study period, 491 patients were treated at the University of Iowa Hospitals and Clinics for a total of 7692 fractions. Results: All treatment records from the 5 month analysis period were evaluated using all the checks incorporated into CATERS after the training period. About 553 events were detected as being exceptions, although none of them had significant dosimetric impact on patient treatments. These events included every known event type that was discovered during the trial period. A frequency analysis of the events showed that the top three types of detected events were couch position override (3.2%), extra cone beam imaging (1.85%), and significant couch position deviation (1.31%). The significant couch deviation is defined as the number of treatments where couch vertical exceeded two times standard deviation of all couch verticals, or couch lateral/longitudinal exceeded three times standard deviation of all couch laterals and longitudinals. On average, the application takes about 1 s per patient when

  8. The Use of Computers in Broadcast Education.

    Science.gov (United States)

    Singleton, Timothy J.

    Speech communication and journalism instructors should be aware of how computers are used in the mass media and what role computer systems can play in broadcast education. Many radio and television stations commonly use computers for accounting and business functions, and they are beginning to expand their computer operations to program logs and…

  9. Interactive Computer Based Lessons for Engineering Education

    Science.gov (United States)

    Bennett, James A.

    1975-01-01

    Discusses the advantages and disadvantages of three types of computer instruction in engineering education: tutorial, design, and simulations. Includes comments on efficiency, student acceptance, and scheduling problems. (MLH)

  10. Analytical evaluation of computer-based decision aids

    International Nuclear Information System (INIS)

    Kisner, R.A.

    1985-01-01

    This paper introduces a method for evaluating decision aids for nuclear power plant operators. The method involves a two-stage process of classification and analytical evaluation of display form and content. The classification scheme relates each specific aid to one or more general decision-making tasks. Evaluation then proceeds using a normative top-down design process based on the classification scheme by determining or deducing how various design issues associated with this process were resolved by the designer. The result is an assessment of the ''understandability'' of the aid as well as identification of the training and display features necessary to ensure understandability. 7 refs., 4 figs., 1 tab

  11. Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

    Science.gov (United States)

    Kolb, Mark A.

    1990-01-01

    Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

  12. Toward a computer-aided methodology for discourse analysis ...

    African Journals Online (AJOL)

    aided methods to discourse analysis”. This project aims to develop an e-learning environment dedicated to documenting, evaluating and teaching the use of corpus linguistic tools suitable for interpretative text analysis. Even though its roots are in ...

  13. Strand V: Education for Survival. First Aid and Survival Education. Grades 4, 5, 6.

    Science.gov (United States)

    New York State Education Dept., Albany. Bureau of Elementary Curriculum Development.

    GRADES OR AGES: Grades 4-6. SUBJECT MATTER: First aid and survival education. ORGANIZATION AND PHYSICAL APPEARANCE: The guide is divided into seven sections: introduction to first aid; wounds and control of minor bleeding; respiratory emergencies and resuscitation; poisoning; traumatic shock; and injuries from abnormal conditions. The publication…

  14. Computer-aided Framework for Design of Pure, Mixed and Blended Products

    DEFF Research Database (Denmark)

    Cignitti, Stefano; Zhang, Lei; Gani, Rafiqul

    2015-01-01

    Design of novel chemical products with process and application considerations is an emerging topic in thefield of chemical and biochemical engineering. Methods, such as Computer Aided Molecular Design(CAMD) [1] and Computer-aided Mixture and Blend Design (CAMbD) [2], provide the possibility...... metrics that must be included in today’s product designs, consequently makes the problem harder to mathematically formulate and to solve.In this work, a framework for computer-aided design of pure, mixed and blended chemical products hasbeen developed. The framework is a systematic approach to formulate...

  15. Development of the computer-aided process planning (CAPP system for polymer injection molds manufacturing

    Directory of Open Access Journals (Sweden)

    J. Tepić

    2011-10-01

    Full Text Available Beginning of production and selling of polymer products largely depends on mold manufacturing. The costs of mold manufacturing have significant share in the final price of a product. The best way to improve and rationalize polymer injection molds production process is by doing mold design automation and manufacturing process planning automation. This paper reviews development of a dedicated process planning system for manufacturing of the mold for injection molding, which integrates computer-aided design (CAD, computer-aided process planning (CAPP and computer-aided manufacturing (CAM technologies.

  16. Implementation of cloud computing in higher education

    Science.gov (United States)

    Asniar; Budiawan, R.

    2016-04-01

    Cloud computing research is a new trend in distributed computing, where people have developed service and SOA (Service Oriented Architecture) based application. This technology is very useful to be implemented, especially for higher education. This research is studied the need and feasibility for the suitability of cloud computing in higher education then propose the model of cloud computing service in higher education in Indonesia that can be implemented in order to support academic activities. Literature study is used as the research methodology to get a proposed model of cloud computing in higher education. Finally, SaaS and IaaS are cloud computing service that proposed to be implemented in higher education in Indonesia and cloud hybrid is the service model that can be recommended.

  17. [AIDS/education and prevention: methodologic proposal for the development of educational games].

    Science.gov (United States)

    Araújo, M F; de Almeida, M I; da Silva, R M

    2000-01-01

    The development of educational resources to mediate actions in health education and AIDS prevention has been a challenge to health's educators. Due to the undeniable importance of this kind of material in environments favourable to learning, the authors created a methodological proposal to be used in the elaboration of educative games with the purpose of mediating educational measures and the prevention of HIV/AIDS. For theoretical framework, the study relied on the ideas/premises about problem solving, adapted from Charles Manguerez's "arch method", which where put into practice in public schools and health institutions in the state of Ceara, having as study population a group of students (180), aged 13 to 19 years, from the period of 1995 to 1997. Data collection occurred during four workshops, according to a predefined scheme. The results dealing with the meaning of the game, place of action and social environment were obtained from the teenagers while they were engaged in the games and further analysed by them, resulting in the formulation of (03) educative games (memor AIDS, baralhAIDS and dominAIDS). The authors conclude that the proposal is favourable to participatory action, encouraging during its entire process the development of intellectual and creative skills, by way of mobilizing human capacities and exercising associations related to the AIDS epidemic. Due to its clarity, the authors consider the proposal scientifically acceptable as a methodological guideline for the elaboration of educative games.

  18. Equipping educators to address HIV and AIDS: a review of selected teacher education initiatives.

    Science.gov (United States)

    Holderness, W L Bill

    2012-12-01

    Teacher educators, school principals and teachers are potentially well positioned to play a pivotal role in changing the course of the HIV and AIDS epidemic. The purpose of this article is to focus on a spectrum of educational initiatives in sub-Saharan Africa and South Africa which are designed to equip educators to be informed about, and to manage, HIV and AIDS in their personal and professional lives. Criteria for inclusion in the review are that the HIV and AIDS education endeavours must be operational (already functioning) and experience-based (have been experienced first-hand by the author). The review begins with a reflective account of two major undertakings: (a) an e-learning course for teacher educators in sub-Saharan Africa and (b) South Africa's Higher Education HIV/AIDS Programme. Thereafter, the review considers a range of academic pursuits currently involving in-service school teachers and principals studying at a South African university. These include (a) two Advanced Certificates in Education; (b) doctoral studies; and (c) a new short learning programme. In reflecting on these various innovative but 'do-able' offerings, the article concludes that experiential and context-specific action-based learning and research into the social and educational aspects of HIV and AIDS can contribute to breaking the silence and reducing stigma while, at the same time, equipping educators to provide care and support for infected and affected learners and colleagues.

  19. Computer aided decision support system for cervical cancer classification

    Science.gov (United States)

    Rahmadwati, Rahmadwati; Naghdy, Golshah; Ros, Montserrat; Todd, Catherine

    2012-10-01

    Conventional analysis of a cervical histology image, such a pap smear or a biopsy sample, is performed by an expert pathologist manually. This involves inspecting the sample for cellular level abnormalities and determining the spread of the abnormalities. Cancer is graded based on the spread of the abnormal cells. This is a tedious, subjective and time-consuming process with considerable variations in diagnosis between the experts. This paper presents a computer aided decision support system (CADSS) tool to help the pathologists in their examination of the cervical cancer biopsies. The main aim of the proposed CADSS system is to identify abnormalities and quantify cancer grading in a systematic and repeatable manner. The paper proposes three different methods which presents and compares the results using 475 images of cervical biopsies which include normal, three stages of pre cancer, and malignant cases. This paper will explore various components of an effective CADSS; image acquisition, pre-processing, segmentation, feature extraction, classification, grading and disease identification. Cervical histological images are captured using a digital microscope. The images are captured in sufficient resolution to retain enough information for effective classification. Histology images of cervical biopsies consist of three major sections; background, stroma and squamous epithelium. Most diagnostic information are contained within the epithelium region. This paper will present two levels of segmentations; global (macro) and local (micro). At the global level the squamous epithelium is separated from the background and stroma. At the local or cellular level, the nuclei and cytoplasm are segmented for further analysis. Image features that influence the pathologists' decision during the analysis and classification of a cervical biopsy are the nuclei's shape and spread; the ratio of the areas of nuclei and cytoplasm as well as the texture and spread of the abnormalities

  20. Computer-aided assessment of diagnostic images for epidemiological research

    Directory of Open Access Journals (Sweden)

    Gange Stephen J

    2009-11-01

    Full Text Available Abstract Background Diagnostic images are often assessed for clinical outcomes using subjective methods, which are limited by the skill of the reviewer. Computer-aided diagnosis (CAD algorithms that assist reviewers in their decisions concerning outcomes have been developed to increase sensitivity and specificity in the clinical setting. However, these systems have not been well utilized in research settings to improve the measurement of clinical endpoints. Reductions in bias through their use could have important implications for etiologic research. Methods Using the example of cortical cataract detection, we developed an algorithm for assisting a reviewer in evaluating digital images for the presence and severity of lesions. Available image processing and statistical methods that were easily implementable were used as the basis for the CAD algorithm. The performance of the system was compared to the subjective assessment of five reviewers using 60 simulated images. Cortical cataract severity scores from 0 to 16 were assigned to the images by the reviewers and the CAD system, with each image assessed twice to obtain a measure of variability. Image characteristics that affected reviewer bias were also assessed by systematically varying the appearance of the simulated images. Results The algorithm yielded severity scores with smaller bias on images where cataract severity was mild to moderate (approximately ≤ 6/16ths. On high severity images, the bias of the CAD system exceeded that of the reviewers. The variability of the CAD system was zero on repeated images but ranged from 0.48 to 1.22 for the reviewers. The direction and magnitude of the bias exhibited by the reviewers was a function of the number of cataract opacities, the shape and the contrast of the lesions in the simulated images. Conclusion CAD systems are feasible to implement with available software and can be valuable when medical images contain exposure or outcome information for

  1. Usability Studies in Virtual and Traditional Computer Aided Design Environments for Fault Identification

    Science.gov (United States)

    2017-08-08

    Usability Studies In Virtual And Traditional Computer Aided Design Environments For Fault Identification Dr. Syed Adeel Ahmed, Xavier University...the differences in interaction when compared with traditional human computer interfaces. This paper provides analysis via usability study methods...communicate their subjective opinions. Keywords: Usability Analysis; CAVETM (Cave Automatic Virtual Environments); Human Computer Interface (HCI

  2. Computer aided approach to qualitative and quantitative common cause failure analysis for complex systems

    International Nuclear Information System (INIS)

    Cate, C.L.; Wagner, D.P.; Fussell, J.B.

    1977-01-01

    Common cause failure analysis, also called common mode failure analysis, is an integral part of a complete system reliability analysis. Existing methods of computer aided common cause failure analysis are extended by allowing analysis of the complex systems often encountered in practice. The methods aid in identifying potential common cause failures and also address quantitative common cause failure analysis

  3. Theorizing the Machine: Gender, Education and Computing.

    Science.gov (United States)

    Clegg, Sue

    2001-01-01

    Theorizes relationships between gender, education, and computing, exploring education's role in the continued ideological reproduction of computing and technology as masculine domains. Critiques technological determinism and the sociology of science and postmodernist analyses of technology for reducing technology to the social. Brings together…

  4. Applied Educational Computing: Putting Skills to Practice.

    Science.gov (United States)

    Thomerson, J. D.

    The College of Education at Valdosta State University (Georgia) developed a followup course to their required entry-level educational computing course. The introductory course covers word processing, spreadsheet, database, presentation, Internet, electronic mail, and operating system software and basic computer concepts. Students expressed a need…

  5. Game based learning for computer science education

    NARCIS (Netherlands)

    Schmitz, Birgit; Czauderna, André; Klemke, Roland; Specht, Marcus

    2011-01-01

    Schmitz, B., Czauderna, A., Klemke, R., & Specht, M. (2011). Game based learning for computer science education. In G. van der Veer, P. B. Sloep, & M. van Eekelen (Eds.), Computer Science Education Research Conference (CSERC '11) (pp. 81-86). Heerlen, The Netherlands: Open Universiteit.

  6. Computer Aided Teaching in Photogrammetry, Remote Sensing, and Geomatics - A Status Review

    Science.gov (United States)

    Vyas, A.; Koenig, G.

    2014-04-01

    Education and training play vital role in the utilization of the technology. Shared and coordinated knowledge that geospatial technology and GIS deliver provides a deeper understanding of our present and will also help to better understand our future development. But it is not enough to explain new technological developments during congresses or workshops; it is also necessary to promote these new ideas and to distribute the knowledge by applying new learning strategies. This paper will review the status of computer aided teaching advances during the last decade, with a particular emphasis on photogrammetry, remote sensing, and geomatics. Some best practise examples will be presented featuring prominently recent Massive Open Online Courses (MOOCs) related to our fields. The consideration of mainly free online learning resources will include a commentary on quality and perceived effectiveness.

  7. Computer-aided classification of lung nodules on computed tomography images via deep learning technique

    Directory of Open Access Journals (Sweden)

    Hua KL

    2015-08-01

    Full Text Available Kai-Lung Hua,1 Che-Hao Hsu,1 Shintami Chusnul Hidayati,1 Wen-Huang Cheng,2 Yu-Jen Chen3 1Department of Computer Science and Information Engineering, National Taiwan University of Science and Technology, 2Research Center for Information Technology Innovation, Academia Sinica, 3Department of Radiation Oncology, MacKay Memorial Hospital, Taipei, Taiwan Abstract: Lung cancer has a poor prognosis when not diagnosed early and unresectable lesions are present. The management of small lung nodules noted on computed tomography scan is controversial due to uncertain tumor characteristics. A conventional computer-aided diagnosis (CAD scheme requires several image processing and pattern recognition steps to accomplish a quantitative tumor differentiation result. In such an ad hoc image analysis pipeline, every step depends heavily on the performance of the previous step. Accordingly, tuning of classification performance in a conventional CAD scheme is very complicated and arduous. Deep learning techniques, on the other hand, have the intrinsic advantage of an automatic exploitation feature and tuning of performance in a seamless fashion. In this study, we attempted to simplify the image analysis pipeline of conventional CAD with deep learning techniques. Specifically, we introduced models of a deep belief network and a convolutional neural network in the context of nodule classification in computed tomography images. Two baseline methods with feature computing steps were implemented for comparison. The experimental results suggest that deep learning methods could achieve better discriminative results and hold promise in the CAD application domain. Keywords: nodule classification, deep learning, deep belief network, convolutional neural network

  8. Novel Kinds of Random Access Memory and New Vulnerabilities of Computer Aids based on Them

    Directory of Open Access Journals (Sweden)

    Alexander Mihaylovich Korotin

    2014-09-01

    Full Text Available The article discusses vulnerabilities of computer aids based on existing RAM and mechanisms for restricting exploitation of such vulnerabilities. In addition, the article discusses features and work methods of different RAM.

  9. Application of computer-aided multi-scale modelling framework – Aerosol case study

    DEFF Research Database (Denmark)

    Heitzig, Martina; Sin, Gürkan; Glarborg, Peter

    2011-01-01

    Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy and water. This trend is set to continue due to the substantial benefits computer-aided...... methods provide. The key prerequisite of computer-aided product-process engineering is however the availability of models of different types, forms and application modes. The development of the models required for the systems under investigation tends to be a challenging and time-consuming task involving...... numerous steps, expert skills and different modelling tools. This motivates the development of a computer-aided modelling framework that supports the user during model development, documentation, analysis, identification, application and re-use with the goal to increase the efficiency of the modelling...

  10. Computer-Aided Diagnosis of Breast Cancer: A Multi-Center Demonstrator

    National Research Council Canada - National Science Library

    Floyd, Carey

    2000-01-01

    .... The focus has been to gather data from multiple sites in order to verify and whether the artificial neural network computer aid to the diagnosis of breast cancer can be translated between locations...

  11. Computer aided taxonomy (CAT): Approach for understanding systematics of marine biota

    Digital Repository Service at National Institute of Oceanography (India)

    Chavan, V.S.; Kavlekar, D.P.; Chandramohan, D.

    Computer aided taconomy (CAT) is gaining importance day by day. In order to familiarise the taxonomy and its continuing usage an attempt has made to develop a module for knowing the systematics of organisms and to generate automatic numerical code...

  12. Computer-aided modeling for efficient and innovative product-process engineering

    DEFF Research Database (Denmark)

    Heitzig, Martina

    methods provide. The key prerequisite of computer-aided productprocess engineering is however the availability of models of different types, forms and application modes. The development of the models required for the systems under investigation tends to be a challenging, time-consuming and therefore cost......Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy and water. This trend is set to continue due to the substantial benefits computer-aided...... methodology for the process of model development and application, combining in-depth algorithmic work-flows for the different modelling tasks involved and the development of a computer-aided modelling framework. This framework is structured, is based on the generic modelling methodology, partially automates...

  13. Computer-aided modeling framework for efficient model development, analysis and identification

    DEFF Research Database (Denmark)

    Heitzig, Martina; Sin, Gürkan; Sales Cruz, Mauricio

    2011-01-01

    methods introduce. The key prerequisite of computer-aided product-process engineering is however the availability of models of different types, forms, and application modes. The development of the models required for the systems under investigation tends to be a challenging and time-consuming task......Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy, and water. This trend is set to continue due to the substantial benefits computer-aided....... The methodology has been implemented into a computer-aided modeling framework, which combines expert skills, tools, and database connections that are required for the different steps of the model development work-flow with the goal to increase the efficiency of the modeling process. The framework has two main...

  14. The Nature of Computational Thinking in Computing Education

    DEFF Research Database (Denmark)

    Spangsberg, Thomas Hvid; Brynskov, Martin

    2018-01-01

    Computational Thinking has gained popularity in recent years within educational and political discourses. It is more than ever crucial to discuss the term itself and what it means. In June 2017, Denning articulated that computational thinking can be viewed as either “traditional” or “new”. New...... computational thinking highlights certain skills as desired in solving problems, whereas traditional computational thinking is a skill set resulting from engaging in traditional computing activities. By looking at computational thinking through the perspective of semiotics, it is possible to dissolve...... the traditional vs new distinction and concentrate on computational thinking having both an explicit and implicit nature. In this perspective, a computer program becomes an algorithmic sign which can both be interpreted by humans and machines. The double interpretation allows for a dialectic relationship between...

  15. Early experiences of computer-aided assessment and administration when teaching computer programming

    OpenAIRE

    Abdullah Mohd Zin; Neil Gutteridge; Eric Foxley; Edmund Burke; Steve Benford

    1993-01-01

    This paper describes early experiences with the Ceilidh system currently being piloted at over 30 institutions of higher education. Ceilidh is a course-management system for teaching computer programming whose core is an auto-assessment facility. This facility automatically marks students programs from a range of perspectives, and may be used in an iterative manner, enabling students to work towards a target level of attainment. Ceilidh also includes extensive courseadministration and progres...

  16. Evaluation of Visual Computer Simulator for Computer Architecture Education

    Science.gov (United States)

    Imai, Yoshiro; Imai, Masatoshi; Moritoh, Yoshio

    2013-01-01

    This paper presents trial evaluation of a visual computer simulator in 2009-2011, which has been developed to play some roles of both instruction facility and learning tool simultaneously. And it illustrates an example of Computer Architecture education for University students and usage of e-Learning tool for Assembly Programming in order to…

  17. Progress of the Computer-Aided Engineering of Electric Drive Vehicle Batteries (CAEBAT) (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, A. A.; Han, T.; Hartridge, S.; Shaffer, C.; Kim, G. H.; Pannala, S.

    2013-06-01

    This presentation, Progress of Computer-Aided Engineering of Electric Drive Vehicle Batteries (CAEBAT) is about simulation and computer-aided engineering (CAE) tools that are widely used to speed up the research and development cycle and reduce the number of build-and-break steps, particularly in the automotive industry. Realizing this, DOE?s Vehicle Technologies Program initiated the CAEBAT project in April 2010 to develop a suite of software tools for designing batteries.

  18. Computer-Aided Transformation of PDE Models: Languages, Representations, and a Calculus of Operations

    Science.gov (United States)

    2016-01-05

    Computer-aided transformation of PDE models: languages, representations, and a calculus of operations A domain-specific embedded language called...languages, representations, and a calculus of operations Report Title A domain-specific embedded language called ibvp was developed to model initial...Computer-aided transformation of PDE models: languages, representations, and a calculus of operations 1 Vision and background Physical and engineered systems

  19. Computer aided monitoring of breast abnormalities in X-ray mammograms

    OpenAIRE

    Selvan, Arul; Saatchi, Reza; Ferris, Christine

    2011-01-01

    X­ray mammography is regarded as the most effective tool for the detection and diagnosis of breast cancer, but the interpretation of mammograms is a difficult and \\ud error­prone task. Computer­aided detection (CADe) systems address the problem that radiologists often miss signs of cancers that are retrospectively visible in mammograms. Furthermore, computer­aided diagnosis (CADx) systems assist the radiologist in the classification of mammographic lesions as benign or malignant[1].\\ud This p...

  20. Employing subgoals in computer programming education

    Science.gov (United States)

    Margulieux, Lauren E.; Catrambone, Richard; Guzdial, Mark

    2016-01-01

    The rapid integration of technology into our professional and personal lives has left many education systems ill-equipped to deal with the influx of people seeking computing education. To improve computing education, we are applying techniques that have been developed for other procedural fields. The present study applied such a technique, subgoal labeled worked examples, to explore whether it would improve programming instruction. The first two experiments, conducted in a laboratory, suggest that the intervention improves undergraduate learners' problem-solving performance and affects how learners approach problem-solving. The third experiment demonstrates that the intervention has similar, and perhaps stronger, effects in an online learning environment with in-service K-12 teachers who want to become qualified to teach computing courses. By implementing this subgoal intervention as a tool for educators to teach themselves and their students, education systems could improve computing education and better prepare learners for an increasingly technical world.

  1. Computer-Assisted Placement: Effective Aid or Paper Albatross?

    Science.gov (United States)

    Sampson, James P.

    1978-01-01

    A short time ago, the computer was a concept of the future which scared many and amazed even more. Now a reality, the computer has become as common on the placement front as the interview. The computer's value to placement is discussed. (Author)

  2. Impact of culturally sensitive AIDS video education on the AIDS risk knowledge of African-American adolescents.

    Science.gov (United States)

    Stevenson, H C; Davis, G

    1994-02-01

    AIDS video education is a major mode of providing information about the spread and prevention of the human immunodeficiency virus (HIV). Very little has been written about the need for culturally salient messages in increasing the acquisition and retention of HIV/AIDS prevention information, even though there is considerable agreement that limited culturally sensitive information is reaching African-American youth. This investigation sought to ascertain the impact of a culturally similar AIDS video on the acquisition of AIDS knowledge and endorsement of HIV/AIDS prevention beliefs. This study randomly assigned classes of African-American teenagers to one of two treatment groups: culturally similar video (CSV) AIDS education and culturally dissimilar video (CDV) AIDS education. Results suggest that the CSV group demonstrated significant improvement in pre- to post- AIDS knowledge scores compared to the CDV group (using ANCOVA procedures). The intervention was not significant in demonstrating change in beliefs about prevention. Implications for the development of HIV/AIDS prevention programs for inner-city African-American youth are discussed.

  3. A Personal Computer as Diagnostic Aid for Strabismus

    OpenAIRE

    Albicki, A.; Cohen, G.H.; Metz, H.S.

    1984-01-01

    This paper describes a microcomputer aided strabismus diagnostic system STRABCON. Two goals were achieved: at any time during the diagnostic process a list of plausible disorders are produced, and an optimal procedure for arriving at a final diagnosis is determined. This publication deals primarily with a microcomputer implementation of the STRABCON diagnostic system.

  4. Aiding human reliance decision making using computational models of trust

    NARCIS (Netherlands)

    Maanen, P.P. van; Klos, T.; Dongen, C.J. van

    2007-01-01

    This paper involves a human-agent system in which there is an operator charged with a pattern recognition task, using an automated decision aid. The objective is to make this human-agent system operate as effectively as possible. Effectiveness is gained by an increase of appropriate reliance on the

  5. Computer aided site management. Site use management by digital mapping

    International Nuclear Information System (INIS)

    Chupin, J.C.

    1990-01-01

    The logistics program developed for assisting the Hague site management is presented. A digital site mapping representation and geographical data bases are used. The digital site map and its integration into a data base are described. The program can be applied to urban and rural land management aid. Technical administrative and economic evaluations of the program are summarized [fr

  6. Computer aided detection of surgical retained foreign object for prevention

    Energy Technology Data Exchange (ETDEWEB)

    Hadjiiski, Lubomir, E-mail: lhadjisk@umich.edu; Marentis, Theodore C.; Rondon, Lucas; Chan, Heang-Ping [Department of Radiology, University of Michigan, Ann Arbor, Michigan 48109 (United States); Chaudhury, Amrita R.; Chronis, Nikolaos [Department of Biomedical Engineering, University of Michigan, Ann Arbor, Michigan 48109 (United States)

    2015-03-15

    Purpose: Surgical retained foreign objects (RFOs) have significant morbidity and mortality. They are associated with approximately $1.5 × 10{sup 9} annually in preventable medical costs. The detection accuracy of radiographs for RFOs is a mediocre 59%. The authors address the RFO problem with two complementary technologies: a three-dimensional (3D) gossypiboma micro tag, the μTag that improves the visibility of RFOs on radiographs, and a computer aided detection (CAD) system that detects the μTag. It is desirable for the CAD system to operate in a high specificity mode in the operating room (OR) and function as a first reader for the surgeon. This allows for fast point of care results and seamless workflow integration. The CAD system can also operate in a high sensitivity mode as a second reader for the radiologist to ensure the highest possible detection accuracy. Methods: The 3D geometry of the μTag produces a similar two dimensional (2D) depiction on radiographs regardless of its orientation in the human body and ensures accurate detection by a radiologist and the CAD. The authors created a data set of 1800 cadaver images with the 3D μTag and other common man-made surgical objects positioned randomly. A total of 1061 cadaver images contained a single μTag and the remaining 739 were without μTag. A radiologist marked the location of the μTag using an in-house developed graphical user interface. The data set was partitioned into three independent subsets: a training set, a validation set, and a test set, consisting of 540, 560, and 700 images, respectively. A CAD system with modules that included preprocessing μTag enhancement, labeling, segmentation, feature analysis, classification, and detection was developed. The CAD system was developed using the training and the validation sets. Results: On the training set, the CAD achieved 81.5% sensitivity with 0.014 false positives (FPs) per image in a high specificity mode for the surgeons in the OR and 96

  7. Computer aided detection of surgical retained foreign object for prevention

    International Nuclear Information System (INIS)

    Hadjiiski, Lubomir; Marentis, Theodore C.; Rondon, Lucas; Chan, Heang-Ping; Chaudhury, Amrita R.; Chronis, Nikolaos

    2015-01-01

    Purpose: Surgical retained foreign objects (RFOs) have significant morbidity and mortality. They are associated with approximately $1.5 × 10 9 annually in preventable medical costs. The detection accuracy of radiographs for RFOs is a mediocre 59%. The authors address the RFO problem with two complementary technologies: a three-dimensional (3D) gossypiboma micro tag, the μTag that improves the visibility of RFOs on radiographs, and a computer aided detection (CAD) system that detects the μTag. It is desirable for the CAD system to operate in a high specificity mode in the operating room (OR) and function as a first reader for the surgeon. This allows for fast point of care results and seamless workflow integration. The CAD system can also operate in a high sensitivity mode as a second reader for the radiologist to ensure the highest possible detection accuracy. Methods: The 3D geometry of the μTag produces a similar two dimensional (2D) depiction on radiographs regardless of its orientation in the human body and ensures accurate detection by a radiologist and the CAD. The authors created a data set of 1800 cadaver images with the 3D μTag and other common man-made surgical objects positioned randomly. A total of 1061 cadaver images contained a single μTag and the remaining 739 were without μTag. A radiologist marked the location of the μTag using an in-house developed graphical user interface. The data set was partitioned into three independent subsets: a training set, a validation set, and a test set, consisting of 540, 560, and 700 images, respectively. A CAD system with modules that included preprocessing μTag enhancement, labeling, segmentation, feature analysis, classification, and detection was developed. The CAD system was developed using the training and the validation sets. Results: On the training set, the CAD achieved 81.5% sensitivity with 0.014 false positives (FPs) per image in a high specificity mode for the surgeons in the OR and 96

  8. Faculty of Education Students' Computer Self-Efficacy Beliefs and Their Attitudes towards Computers and Implementing Computer Supported Education

    Science.gov (United States)

    Berkant, Hasan Güner

    2016-01-01

    This study investigates faculty of education students' computer self-efficacy beliefs and their attitudes towards computers and implementing computer supported education. This study is descriptive and based on a correlational survey model. The final sample consisted of 414 students studying in the faculty of education of a Turkish university. The…

  9. Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology, Volume 1

    Science.gov (United States)

    Hyde, Patricia R.; Loftin, R. Bowen

    1993-01-01

    These proceedings are organized in the same manner as the conference's contributed sessions, with the papers grouped by topic area. These areas are as follows: VE (virtual environment) training for Space Flight, Virtual Environment Hardware, Knowledge Aquisition for ICAT (Intelligent Computer-Aided Training) & VE, Multimedia in ICAT Systems, VE in Training & Education (1 & 2), Virtual Environment Software (1 & 2), Models in ICAT systems, ICAT Commercial Applications, ICAT Architectures & Authoring Systems, ICAT Education & Medical Applications, Assessing VE for Training, VE & Human Systems (1 & 2), ICAT Theory & Natural Language, ICAT Applications in the Military, VE Applications in Engineering, Knowledge Acquisition for ICAT, and ICAT Applications in Aerospace.

  10. Computer applications in remote sensing education

    Science.gov (United States)

    Danielson, R. L.

    1980-01-01

    Computer applications to instruction in any field may be divided into two broad generic classes: computer-managed instruction and computer-assisted instruction. The division is based on how frequently the computer affects the instructional process and how active a role the computer affects the instructional process and how active a role the computer takes in actually providing instruction. There are no inherent characteristics of remote sensing education to preclude the use of one or both of these techniques, depending on the computer facilities available to the instructor. The characteristics of the two classes are summarized, potential applications to remote sensing education are discussed, and the advantages and disadvantages of computer applications to the instructional process are considered.

  11. Development of computer aided engineering system for TRAC applications

    International Nuclear Information System (INIS)

    Arai, Kenji; Itoya, Seihiro; Uematsu, Hitoshi; Tsunoyama, Shigeaki

    1990-01-01

    An advanced best estimate computer program for nuclear reactor transient analysis, TRAC has been extensively used to carry out various thermal hydraulic calculations in the nuclear engineering field, because of its versatility. To perform efficiently a wide variety of TRAC calculation, the efficient utilization of computers and the convenient environment for input and output processing is necessary. We have applied a computer network comprising a super-computer, engineering work stations and personal computers to TRAC calculations and have assigned the appropriate functions to each computer. We have also been developing an interactive graphics system for input and output processing on an EWS. This hardware and software environment can improve the effectiveness of TRAC utilization for various thermal hydraulic calculations. (author)

  12. Computer simulation as an operational and training aid

    International Nuclear Information System (INIS)

    Lee, D.J.; Tottman-Trayner, E.

    1995-01-01

    The paper describes how the rapid development of desktop computing power, the associated fall in prices, and the advancement of computer graphics technology driven by the entertainment industry has enabled the nuclear industry to achieve improvements in operation and training through the use of computer simulation. Applications are focused on the fuel handling operations at Torness Power Station where visualization through computer modelling is being used to enhance operator awareness and to assist in a number of operational scenarios. It is concluded that there are significant benefits to be gained from the introduction of the facility at Torness as well as other locations. (author)

  13. PENGARUH KOMPETISI PASAR DAN COMPUTER-AIDED MANUFACTURING TERHADAP PENGGUNAAN MULTIPLE PERFORMANCE MEASURES

    Directory of Open Access Journals (Sweden)

    Megawati Hutagalung

    2006-01-01

    Full Text Available Recent development in performance measurement area suggests that companies should employ multiple performance measures (such as the Balanced Scorecrad to increase their performance. Little studies, however, have examined factors affecting the usage of multiple performance measures by companies. This study therefore, investigates if market competition and computer aided manufacturing process affecting multiple performance measures usage. Using functional managers of manufacturing companies listed in the Jakarta Stock Exchange as samples, this study finds that market competition and computer aided manufacturing process affecting multiple performance measures usage. Abstract in Bahasa Indonesia : Perkembangan terakhir tentang sistem pengukuran kinerja perusahaan menyarankan perusahaan untuk menggunakan ukuran penilaian yang beragam (seperti balance scorecard untuk meningkatkan kinerja perusahaan. Penelitian sederhana telah menyebutkan factor-faktor yang mempengaruhi penggunaan multiple performance measure oleh perusahaan. Penelitian ini selanjutnya menyelidiki apakah penggunaan multiple performance measure mempengaruhi peningkatan persaingan pasar dan penggunaan computer aided manufacturing (CAM mempengaruhi. Dengan menggunakan. Kata kunci: komputer aided manufacturing, kompetisi pasar, multiple performance measures.

  14. Teaching advance care planning to medical students with a computer-based decision aid.

    Science.gov (United States)

    Green, Michael J; Levi, Benjamin H

    2011-03-01

    Discussing end-of-life decisions with cancer patients is a crucial skill for physicians. This article reports findings from a pilot study evaluating the effectiveness of a computer-based decision aid for teaching medical students about advance care planning. Second-year medical students at a single medical school were randomized to use a standard advance directive or a computer-based decision aid to help patients with advance care planning. Students' knowledge, skills, and satisfaction were measured by self-report; their performance was rated by patients. 121/133 (91%) of students participated. The Decision-Aid Group (n = 60) outperformed the Standard Group (n = 61) in terms of students' knowledge (p satisfaction with their learning experience (p student performance. Use of a computer-based decision aid may be an effective way to teach medical students how to discuss advance care planning with cancer patients.

  15. Review of AIDS development. [airborne computers for reliability engineering

    Science.gov (United States)

    Vermeulen, H. C.; Danielsson, S. G.

    1981-01-01

    The operation and implementation of the aircraft integrated data system AIDS are described. The system is described as an engineering tool with strong emphasis on analysis of recorded information. The AIDS is primarily directed to the monitoring of parameters related to: the safety of the flight; the performance of the aircraft; the performance of the flight guidance system; and the performance and condition of the engines. The system provide short term trend analysis on a trend chart that is updated by the flight engineer on every flight that lasts more than 4 flight hours. Engine data prints are automatically presented during take-off and in the case of limit excedance, e.g., the print shows an automatically reported impending hotstarts on engine nr. 1. Other significant features are reported.

  16. EDITORIAL IMPACT OF HIV/AIDS ON EDUCATION IN THE SUB ...

    African Journals Online (AJOL)

    hi-tech

    eventually recover from the AIDS epidemic(l). The provision and growth of quality education is directly linked to positive economic development, emancipation and health dividends(2). HIV/AIDS impacts negatively on the following aspects of education(2,4). (i) the demand for education, (ii) the supply of education and,.

  17. Computer aided design and development of mixed-propeller pumps

    International Nuclear Information System (INIS)

    Bhaoyal, B.C.

    1994-01-01

    This paper deals with the design principle of mixed propeller hydraulic aided by CADD software developed by author for generation of the hydraulic profile of the mixed propeller and diffuser geometry. The design methodology for plotting the vane profile of mixed propeller pump has been discussed in detail with special reference to conformal transformation in cylindrical as well as conical plane. (author). 10 refs., 11 figs

  18. Education for Social Transformation: Soviet University Education Aid in the Cold War Capitalist World-System

    Science.gov (United States)

    Griffiths, Tom G.; Charon Cardona, Euridice

    2015-01-01

    International education is seen as an effective form of soft power. This article reviews one of history's largest and most ambitious attempts to achieve global influence through university education, and to reshape the world--the Soviet university aid program, 1956-91. Drawing on existing research and Soviet archival materials, we lay out and…

  19. Aid Agency Influence in National Education Policy-Making: A Case from Nepal's "Education for All" Movement

    Science.gov (United States)

    Bhatta, Pramod

    2011-01-01

    This article explores the nexus between foreign aid and Nepal's primary education in order to understand how aid agencies affect national educational development. It argues that after 1990, when global education targets provided the basic framework for all donor agency funding to primary education and the subsequent use of a sector-wide approach…

  20. Computer Technology and Educational Equity. ERIC/CUE Urban Diversity Series, Number 91.

    Science.gov (United States)

    Gordon, Edmund W.; Armour-Thomas, Eleanor

    The impact of the technological revolution on education is examined in this monograph, which focuses primarily on computers. First, the history of the educational uses of a variety of media (film, radio, television, teaching machines, and videodisc systems) is traced and assessed. As instructional aids, it is said, the media economize teachers'…

  1. Computer-aided visual assessment in mine planning and design

    Science.gov (United States)

    Michael Hatfield; A. J. LeRoy Balzer; Roger E. Nelson

    1979-01-01

    A computer modeling technique is described for evaluating the visual impact of a proposed surface mine located within the viewshed of a national park. A computer algorithm analyzes digitized USGS baseline topography and identifies areas subject to surface disturbance visible from the park. Preliminary mine and reclamation plan information is used to describe how the...

  2. Computer-aided visualization of muscle weakness distribution.

    NARCIS (Netherlands)

    Pieterse, A.J.; Voermans, N.C.; Tuinenga, H.S.; Engelen, B.G.M. van

    2008-01-01

    We present a computer program for visualizing muscle weakness distribution in patients with neuromuscular disorders. Ordinal muscle strength data can be computed in the program. Data are visualized as the prime movers of the testmovements in an image of the human body and a separate image of the

  3. Hypnosis in Educational Programs: Its Implications As an Educational Aid.

    Science.gov (United States)

    Knight, Joseph

    Although hypnosis has not been extensively used in education, a review of past research reveals five areas which might benefit from hypnotherapy: (1) motivation, (2) study habits, (3) concentration, (4) remedial reading, and (5) test anxiety. A questionnaire focusing on these areas was developed to determine the attitude of professional personnel…

  4. Computer Programming Education with Miranda

    NARCIS (Netherlands)

    Joosten, S.M.M.; van den Berg, Klaas

    During the past four years, an experiment has been carried out with an introductory course in computer programming, based on functional programming. This article describes the background of this approach, the aim of the computer programming course, the outline and subject matter of the course parts

  5. Computer-Aided Detection of Polyps in CT Colonography Using Logistic Regression

    NARCIS (Netherlands)

    Van Ravesteijn, V.F.; Van Wijk, C.; Vos, F.M.; Truyen, R.; Peters, J.F.; Stoker, J.; Van Vliet, L.J.

    2010-01-01

    We present a computer-aided detection (CAD) system for computed tomography colonography that orders the polyps according to clinical relevance. TheCADsystem consists of two steps: candidate detection and supervised classification. The characteristics of the detection step lead to specific choices

  6. Computer-aided detection of polyps in CT colonography using logistic regression

    NARCIS (Netherlands)

    van Ravesteijn, Vincent F.; van Wijk, Cees; Vos, Frans M.; Truyen, Roel; Peters, Joost F.; Stoker, Jaap; van Vliet, Lucas J.

    2010-01-01

    We present a computer-aided detection (CAD) system for computed tomography colonography that orders the polyps according to clinical relevance. The CAD system consists of two steps: candidate detection and supervised classification. The characteristics of the detection step lead to specific choices

  7. Computer Aided School Timetabling: Part 1: The History of Computerised Timetabling.

    Science.gov (United States)

    Dowsland, W. B.; Lim, S.

    1982-01-01

    This material looks at the historical developments of computer-aided timetabling, with particular emphasis on the limitations of present systems. Five common criticisms of mainframe computer timetabling packages are pointed out, and the development of a microcomputer-based package in its initial creation is described. (MP)

  8. CONTRIBUTIONS FOR DEVELOPING OF A COMPUTER AIDED LEARNING ENVIRONMENT OF DESCRIPTIVE GEOMETRY

    Directory of Open Access Journals (Sweden)

    Antonescu Ion

    2009-07-01

    Full Text Available The paper presents the authors’ contributions for developing a computer code for teaching of descriptive geometry using the computer aided learning techniques. The program was implemented using the programming interface and the 3D modeling capabilities of the AutoCAD system.

  9. Computer aided composition by means of interactive GP

    DEFF Research Database (Denmark)

    Ando, Daichi; Dahlstedt, Palle; Nordahl, Mats G.

    2006-01-01

    developed for IEC-based composition have not necessarily proven very effective for professional use. This is due to the large difference between data representation used by IEC and authored classical music composition. To solve this difficulties, we purpose a new IEC approach to music composition based......Research on the application of Interactive Evolutionary Computation (IEC) to the field of musical computation has been improved in recent years, marking an interesting parallel to the current trend of applying human characteristics or sensitivities to computer systems. However, past techniques...

  10. A Multi-step and Multi-level approach for Computer Aided Molecular Design

    DEFF Research Database (Denmark)

    A general multi-step approach for setting up, solving and solution analysis of computer aided molecular design (CAMD) problems is presented. The approach differs from previous work within the field of CAMD since it also addresses the need for a computer aided problem formulation and result analysis....... The problem formulation step incorporates a knowledge base for the identification and setup of the design criteria. Candidate compounds are identified using a multi-level generate and test CAMD solution algorithm capable of designing molecules having a high level of molecular detail. A post solution step...... using an Integrated Computer Aided System (ICAS) for result analysis and verification is included in the methodology. Keywords: CAMD, separation processes, knowledge base, molecular design, solvent selection, substitution, group contribution, property prediction, ICAS Introduction The use of Computer...

  11. A review of computer-aided oral and maxillofacial surgery: planning, simulation and navigation.

    Science.gov (United States)

    Chen, Xiaojun; Xu, Lu; Sun, Yi; Politis, Constantinus

    2016-11-01

    Currently, oral and maxillofacial surgery (OMFS) still poses a significant challenge for surgeons due to the anatomic complexity and limited field of view of the oral cavity. With the great development of computer technologies, he computer-aided surgery has been widely used for minimizing the risks and improving the precision of surgery. Areas covered: The major goal of this paper is to provide a comprehensive reference source of current and future development of computer-aided OMFS including surgical planning, simulation and navigation for relevant researchers. Expert commentary: Compared with the traditional OMFS, computer-aided OMFS overcomes the disadvantage that the treatment on the region of anatomically complex maxillofacial depends almost exclusively on the experience of the surgeon.

  12. Computer-aided method of airborne uranium in working areas

    International Nuclear Information System (INIS)

    Dagen, E.; Ringel, V.; Rossbach, H.

    1981-09-01

    The described procedure allows the routine determination of uranium aerosols with low personnel and technical efforts. The activity deposited on the filters is measured automatically twice a night. The computerized evaluation, including the elimination of radon and thoron daughter products, is made off-line with the aid of the code ULK1. The results are available at the beginning of the following working day and can be used for radiation protection planning. The sensitivity of the method of eliminating the airborne natural activity is 4 times less than that of measurements after its complete decay. This, however, is not of significance for radiation protection purposes

  13. An Analysis of 27 Years of Research into Computer Education Published in Australian Educational Computing

    Science.gov (United States)

    Zagami, Jason

    2015-01-01

    Analysis of three decades of publications in Australian Educational Computing (AEC) provides insight into the historical trends in Australian educational computing, highlighting an emphasis on pedagogy, comparatively few articles on educational technologies, and strong research topic alignment with similar international journals. Analysis confirms…

  14. Platform-independent method for computer aided schematic drawings

    Science.gov (United States)

    Vell, Jeffrey L [Slingerlands, NY; Siganporia, Darius M [Clifton Park, NY; Levy, Arthur J [Fort Lauderdale, FL

    2012-02-14

    A CAD/CAM method is disclosed for a computer system to capture and interchange schematic drawing and associated design information. The schematic drawing and design information are stored in an extensible, platform-independent format.

  15. Computer-aided visualization and analysis system for sequence evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Chee, Mark S.; Wang, Chunwei; Jevons, Luis C.; Bernhart, Derek H.; Lipshutz, Robert J.

    2004-05-11

    A computer system for analyzing nucleic acid sequences is provided. The computer system is used to perform multiple methods for determining unknown bases by analyzing the fluorescence intensities of hybridized nucleic acid probes. The results of individual experiments are improved by processing nucleic acid sequences together. Comparative analysis of multiple experiments is also provided by displaying reference sequences in one area and sample sequences in another area on a display device.

  16. Students Computer Skills in Faculty of Education

    Directory of Open Access Journals (Sweden)

    Mehmet Caglar

    2010-09-01

    Full Text Available Nowadays; the usage of technology is not a privilege but an obligation. Technological developments influence structures andfunctions of educational institutions. It is also expected from the teachers that they integrate technology in their lessons inorder to educate the individuals of information society. This research has covered 145(68 female, 78 male students, studying inNear East University Faculty of Education. The Computer Skills Scale developed by Güçlü (2010 was used as a data collectingtool. Data were analysed using SPSS software program. In this study, students’ computer skills were investigated; the variationsin the relationships between computer skills and (a gender, (b family’s net monthly income, (c presence of computers athome, (d presence of a computer laboratory at school and (e parents’ computer skills were examined. Frequency analysis,percentage and mean calculations were used. In addition, t-test and multi-variate analysis were used to look at the relationshipbetween different variables. As a result of this study, a statistically significant relationship between computer skills of studentswho had a computer at home and computer skills of those who didn’t have a computer at home were found.

  17. Task Lists for Health Occupations. Radiologic Aide. Activity Aide. Optometric Assistant. Physical Therapy Aide. Education for Employment Task Lists.

    Science.gov (United States)

    Lathrop, Janice

    These task lists contain employability skills and tasks for the following health occupations: radiologic aide, activity aide, physical therapy aide, and optometric assistant. The duties and tasks found in these lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs. Employability skills…

  18. Computer-aided testing and operational aids for PARR-1 nuclear reactor

    International Nuclear Information System (INIS)

    Ansari, S.A.

    1990-01-01

    The utilization of the plant computer of Pakistan Research Reactor (PARR-1) for automatic periodic testing of nuclear instrumentation in the reactor is described. Computer algorithms have been developed for on-line acquisition and real-time processing of nuclear channel signals. The mean value, standard deviation, and probability distributions of nuclear channel signals are obtained in real time, and the computer generates a warning message if the signal error exceeds the maximum permissible error. In this way a faulty channel is automatically identified. Other real-time algorithms are also described that assist the operator in safe reactor operation by automatically computing approach-to-criticality during reactor start-up and the control rod worth determination

  19. Computer-aided diagnosis for screening of breast cancer on mammograms. Current status and future potential

    International Nuclear Information System (INIS)

    Doi, Kunio

    2007-01-01

    Described are the history, current status and future potential of computer-aided diagnosis (CAD) with particular emphasis on screening mammography for breast cancer. The systematic basic and clinical studies on CAD started around 20 years before and the significance of CAD has been well recognized to be evident because of human errors occurring in the visual check by doctors of so numerous screening images. Improvement of diagnostic accuracy by CAD has been demonstrated by statistical analysis of ROC (receiver operating characteristic) curves. In mammography, reviewed is detection of the early stage breast cancer like microcalcifications by computer alone, by CAD plus one or more doctors' reading, and by practical clinical CAD diagnosis. For differential diagnosis for malignancy, microcalcifications and masses are given their characteristic image properties and the results are that the Az-value (area under ROC curve) is higher in CAD than in doctor's (0.80 vs 0.61) in the former and, doctor's (0.93) is improved by CAD to 0.96 in the latter masses. In this diagnosis, similar images in the digital database are useful and the database can learn by repeated input of individual data by neural network. Detection of the lesion and especially, its differential diagnosis will be more important in parallel to database development and CAD will be also useful for doctor' carrier as an educational mean. (R.T.)

  20. Computer-aided diagnosis improves detection of small intracranial aneurysms on MRA in a clinical setting.

    Science.gov (United States)

    Štepán-Buksakowska, I L; Accurso, J M; Diehn, F E; Huston, J; Kaufmann, T J; Luetmer, P H; Wood, C P; Yang, X; Blezek, D J; Carter, R; Hagen, C; Hořínek, D; Hejčl, A; Roček, M; Erickson, B J

    2014-10-01

    MRA is widely accepted as a noninvasive diagnostic tool for the detection of intracranial aneurysms, but detection is still a challenging task with rather low detection rates. Our aim was to examine the performance of a computer-aided diagnosis algorithm for detecting intracranial aneurysms on MRA in a clinical setting. Aneurysm detectability was evaluated retrospectively in 48 subjects with and without computer-aided diagnosis by 6 readers using a clinical 3D viewing system. Aneurysms ranged from 1.1 to 6.0 mm (mean = 3.12 mm, median = 2.50 mm). We conducted a multireader, multicase, double-crossover design, free-response, observer-performance study on sets of images from different MRA scanners by using DSA as the reference standard. Jackknife alternative free-response operating characteristic curve analysis with the figure of merit was used. For all readers combined, the mean figure of merit improved from 0.655 to 0.759, indicating a change in the figure of merit attributable to computer-aided diagnosis of 0.10 (95% CI, 0.03-0.18), which was statistically significant (F(1,47) = 7.00, P = .011). Five of the 6 radiologists had improved performance with computer-aided diagnosis, primarily due to increased sensitivity. In conditions similar to clinical practice, using computer-aided diagnosis significantly improved radiologists' detection of intracranial DSA-confirmed aneurysms of ≤6 mm. © 2014 by American Journal of Neuroradiology.

  1. The Impact of Machine Translation and Computer-aided Translation on Translators

    Science.gov (United States)

    Peng, Hao

    2018-03-01

    Under the context of globalization, communications between countries and cultures are becoming increasingly frequent, which make it imperative to use some techniques to help translate. This paper is to explore the influence of computer-aided translation on translators, which is derived from the field of the computer-aided translation (CAT) and machine translation (MT). Followed by an introduction to the development of machine and computer-aided translation, it then depicts the technologies practicable to translators, which are trying to analyze the demand of designing the computer-aided translation so far in translation practice, and optimize the designation of computer-aided translation techniques, and analyze its operability in translation. The findings underline the advantages and disadvantages of MT and CAT tools, and the serviceability and future development of MT and CAT technologies. Finally, this thesis probes into the impact of these new technologies on translators in hope that more translators and translation researchers can learn to use such tools to improve their productivity.

  2. Experiences In The Design And Use Of An Expert System For Computer-Aided Control System Design

    Science.gov (United States)

    Birdwell, J. Douglas; Cockett, J. Robin B.

    1987-05-01

    An expert system, the Computer-Aided Systems and Control. Analysis and Design Environment (CASCADE) has been implemented for the design of multivariable controllers for linear plants, using the linear quadratic Gaussian/loop transfer recovery (LQG/I,T11.) design methodology [1,2,3]. The expert system was implemented using a novel shell, DECIDE [4,5], which uses a decision expression methodology and incorporates explanation and backtracking, and linkage with the numeric and graphics software necessary for control system analysis and design. CASCADE was evaluated by generating trial designs for several realistic applications in the following areas: High voltage DC power transmission, robot manipulator path tracking, large structure active stiffening, aircraft stability augmentation, wind power cogeneration, bioreactor control, and steam power plant control. Since these designs were performed by graduate students, this provided an evaluation of the CASCADE implementation as both an expert system-based design package and an aid in education. We found that not only was the expert system useful for computer-aided design and education; it also served to demonstrate several subtle fallacies in the theoretical design methodology. Our surmise is that these fallacies had remained undiscovered because of the significant investment required in the mechanics of the design process in previous work. The expert system allowed attention to be focused-on a codification of design knowledge rather than on the algorithmic details.

  3. Computer Literacy in a Distance Education System

    Science.gov (United States)

    Farajollahi, Mehran; Zandi, Bahman; Sarmadi, Mohamadreza; Keshavarz, Mohsen

    2015-01-01

    In a Distance Education (DE) system, students must be equipped with seven skills of computer (ICDL) usage. This paper aims at investigating the effect of a DE system on the computer literacy of Master of Arts students at Tehran University. The design of this study is quasi-experimental. Pre-test and post-test were used in both control and…

  4. Switching from Computer to Microcomputer Architecture Education

    Science.gov (United States)

    Bolanakis, Dimosthenis E.; Kotsis, Konstantinos T.; Laopoulos, Theodore

    2010-01-01

    In the last decades, the technological and scientific evolution of the computing discipline has been widely affecting research in software engineering education, which nowadays advocates more enlightened and liberal ideas. This article reviews cross-disciplinary research on a computer architecture class in consideration of its switching to…

  5. Principles of Tablet Computing for Educators

    Science.gov (United States)

    Katzan, Harry, Jr.

    2015-01-01

    In the study of modern technology for the 21st century, one of the most popular subjects is tablet computing. Tablet computers are now used in business, government, education, and the personal lives of practically everyone--at least, it seems that way. As of October 2013, Apple has sold 170 million iPads. The success of tablets is enormous and has…

  6. Computer aided composition by means of interactive GP

    DEFF Research Database (Denmark)

    Ando, Daichi; Dahlstedt, Palle; Nordahl, Mats G.

    2006-01-01

    developed for IEC-based composition have not necessarily proven very effective for professional use. This is due to the large difference between data representation used by IEC and authored classical music composition. To solve this difficulties, we purpose a new IEC approach to music composition based...... on classical music theory. In this paper, we describe an established system according to the above idea, and detail of making success of composition a piece.......Research on the application of Interactive Evolutionary Computation (IEC) to the field of musical computation has been improved in recent years, marking an interesting parallel to the current trend of applying human characteristics or sensitivities to computer systems. However, past techniques...

  7. Human performance models for computer-aided engineering

    Science.gov (United States)

    Elkind, Jerome I. (Editor); Card, Stuart K. (Editor); Hochberg, Julian (Editor); Huey, Beverly Messick (Editor)

    1989-01-01

    This report discusses a topic important to the field of computational human factors: models of human performance and their use in computer-based engineering facilities for the design of complex systems. It focuses on a particular human factors design problem -- the design of cockpit systems for advanced helicopters -- and on a particular aspect of human performance -- vision and related cognitive functions. By focusing in this way, the authors were able to address the selected topics in some depth and develop findings and recommendations that they believe have application to many other aspects of human performance and to other design domains.

  8. Morse-code-controlled computer aid for the nonvocal quadriplegic.

    Science.gov (United States)

    Shannon, D A; Staewen, W S; Miller, J T; Cohen, B S

    1981-01-01

    A computer-based communications system was established for a quadriplegic patient who suffered a brainstem infarction that left him with normal intelligence, but without speech and without functional motor control except for the thumb of his right hand. An arm brace was developed to support the hand and thumb so it could control two switches that generated Morse code signals. An interface was also devised to translate Morse code into ASCII characters to access a personal computer. Additional codes were added to represent keyboard control functions. This device allows the patient to communicate with others and control, to some extent, his environment.

  9. Server-Aided Two-Party Computation with Simultaneous Corruption

    DEFF Research Database (Denmark)

    Cascudo Pueyo, Ignacio; Damgård, Ivan Bjerre; Ranellucci, Samuel

    We consider secure two-party computation in the client-server model where there are two adversaries that operate separately but simultaneously, each of them corrupting one of the parties and a restricted subset of servers that they interact with. We model security via the local universal composab......We consider secure two-party computation in the client-server model where there are two adversaries that operate separately but simultaneously, each of them corrupting one of the parties and a restricted subset of servers that they interact with. We model security via the local universal...

  10. Computer-aided surgical planning for congenital aural atresia

    Science.gov (United States)

    Li, Bin; Chen, Dongqing; Smouha, Eric; Liang, Zhengrong

    2000-04-01

    We have designed and implemented a prototype system to aid in the surgical repair of congenital aural atresia. A two- level segmentation algorithm was first developed to separate tissues of similar intensity or low tissue contrast. Then an interactive visualization modular was built to display the labeled tissues. The system allows a 3-stage interactive planning in which positioning, marking and drilling simulates the surgical operation of congenital atresia repair. A voxel-based volume CSG operation was implemented to ensure the efficiency of interactive planning. Six patients with congenital aural atresia underwent virtual planning in preparation for surgery. This technique has proved to be a valuable planning tool, with the potential for virtual representation of the surgical reconstruction.

  11. Comparison of intraoperative time measurements between osseous reconstructions with free fibula flaps applying computer-aided designed/computer-aided manufactured and conventional techniques.

    Science.gov (United States)

    Rustemeyer, Jan; Sari-Rieger, Aynur; Melenberg, Alex; Busch, Alexander

    2015-09-01

    We aimed to determine whether computer-aided designed/computer-aided manufactured (CAD/CAM) techniques could save intraoperative time compared with the conventional technique, by comparing flap harvesting and ischemia times, and subsequently impact flap survival. Twenty patients underwent concurrent osteocutaneous fibula flaps, either with (n = 10) or without (n = 10) the CAD/CAM technique. Demographic data, clinical history, complications, number of osseous segments, and times for virtual planning, flap harvesting, flap ischemia, tourniquet inflation, and total reconstruction were recorded. There was no significant difference between CAD/CAM and conventional techniques with respect to age, number of osseous segments, complication rates, and tourniquet inflation time. Flap harvesting times were significantly shorter in the conventional group (112.1 vs. 142.2 min, p technique, including reduced ischemia time of osteocutaneous fibula flaps, there is no impact on total reconstruction time or flap survival.

  12. Mandibular reconstructions using computer-aided design/computer-aided manufacturing: A systematic review of a defect-based reconstructive algorithm.

    Science.gov (United States)

    Tarsitano, Achille; Del Corso, Giacomo; Ciocca, Leonardo; Scotti, Roberto; Marchetti, Claudio

    2015-11-01

    Modern planning techniques, including computer-aided design/computer-aided manufacturing (CAD-CAM) can be used to plan reconstructive surgery, optimising aesthetic outcomes and functional rehabilitation. However, although many such applications are available, no systematic protocol yet describes the entire reconstructive procedure, which must include virtual planning, custom manufacture, and a reconstructive algorithm. We reviewed current practices in this novel field, analysed case series described in the literature, and developed a new, defect-based reconstructive algorithm. We also evaluated methods of mandibular reconstruction featuring virtual planning, the use of surgical guides, and laser printing of custom titanium bony plates to support composite free flaps, and evaluated their utility. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  13. Modification of planned postoperative occlusion in orthognathic surgery, based on computer-aided design/computer-aided manufacturing-engineered preoperative surgical simulation.

    Science.gov (United States)

    Kang, Sang-Hoon; Kim, Moon-Key; You, Tae-Kwon; Lee, Ji-Yeon

    2015-01-01

    In orthognathic surgery, it is important to have a planned postoperative occlusion. A 3-dimensional preoperative simulation, based on 3-dimensional optically scanned occlusion data, can predict how the planned postoperative occlusion will affect the maxilla-mandibular relationship that results from orthognathic surgery. In this study we modified the planned postoperative occlusion, based on computer-aided design/computer-aided manufacturing-engineered preoperative surgical simulations. This modification made it possible to resolve the facial asymmetry of the patient successfully with a simple bilateral intraoral vertical ramus osteotomy and no additional maxillary or mandibular surgery. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  14. Computational Thinking in Mathematics Teacher Education

    Science.gov (United States)

    Gadanidis, George; Cendros, Rosa; Floyd, Lisa; Namukasa, Immaculate

    2017-01-01

    As computational thinking (CT) is increasing in focus in K-12 education, it is important to consider how teacher education programs may better prepare teacher candidates (TCs). Previous studies have found that TCs do not always have a firm understanding of what CT involves, and they might not have clear ideas about how to develop CT in their…

  15. Abdominal Computed tomography of 25 patients with AIDS or lymphadenopathy Syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Arrive, L.; Frija, J.; Couderc, L.J.; Clauvel, J.P.; Laval-Jeantet, M.

    1986-03-01

    An abdominal computed tomographic examination was performed to 20 patients with Acquired Immunodeficiency Syndrome (AIDS) and to 5 patients with Lymphadenopathy Syndrome (LAS). Intraabdominal lymph nodes were seen in 18 out of 20 cases of AIDS and in 5 cases of LAS. Lymph nodes have a normal size or are slightly enlarged but they are too numerous. Splenomegaly was found in 17 patients. Rectal modifications secondary to a proctitis were seen in the homosexual patients.

  16. Abdominal Computed tomography of 25 patients with AIDS or lymphadenopathy Syndrome

    International Nuclear Information System (INIS)

    Arrive, L.; Frija, J.; Couderc, L.J.; Clauvel, J.P.; Laval-Jeantet, M.; Matheron, S.

    1986-01-01

    An abdominal computed tomographic examination was performed to 20 patients with Acquired Immunodeficiency Syndrome (AIDS) and to 5 patients with Lymphadenopathy Syndrome (LAS). Intraabdominal lymph nodes were seen in 18 out of 20 cases of AIDS and in 5 cases of LAS. Lymph nodes have a normal size or are slightly enlarged but they are too numerous. Splenomegaly was found in 17 patients. Rectal modifications secondary to a proctitis were seen in the homosexual patients [fr

  17. Computer-aided virtual surgery for congenital aural atresia.

    Science.gov (United States)

    Smouha, E E; Chen, D; Li, B; Liang, Z

    2001-03-01

    Computer-enhanced three-dimensional (3D) computed tomography (CT) provides accurate spatial representation of the complex surgical anatomy of congenitally atretic ears, and is superior to conventional CT for surgical planning. The surgical repair of congenital aural atresia is challenging. Conventional CT, routinely used for surgical planning, is limited in its ability to represent spatial relationships between important structures. Because of the lack of density differences between bony structures in the ear, 3D CT has thus far been useful for representing surface contour but not internal anatomy. A two-level segmentation scheme was developed to distinguish structures in the temporal bone. 3D CT reconstructions of congenital ears were produced with a high-resolution helical scanner. An interactive tool was used to mark the ossicles and facial nerve. The segmentation scheme was used to color-enhance the ossicles and otic capsule, and render the surrounding bone translucent. "Virtual surgery" was then performed by subtracting a cylindrical volume of bone lateral to the atresia plate. The enhanced 3D CT reconstructions were correlated with intraoperative video recordings. In four congenital ears, computer-enhanced 3D CT was highly predictive of the actual anatomy. Surgery was avoided in two anatomically unfavorable cases. Computer-enhanced 3D CT is a major advance over conventional CT for demonstrating the complex spatial relationships in congenitally atretic ears.

  18. A computer-aided surface roughness measurement system

    International Nuclear Information System (INIS)

    Hughes, F.J.; Schankula, M.H.

    1983-11-01

    A diamond stylus profilometer with computer-based data acquisitions/analysis system is being used to characterize surfaces of reactor components and materials, and to examine the effects of surface topography on thermal contact conductance. The current system is described; measurement problems and system development are discussed in general terms and possible future improvements are outlined

  19. Toward a computer-aided methodology for discourse analysis ...

    African Journals Online (AJOL)

    If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs. Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link ...

  20. The potential impact of computer-aided assessment technology in ...

    African Journals Online (AJOL)

    Limitations linked to CAA include the possibility that CAA may not be suitable for assessing skills such as constructive argument, writing, presentation and interpersonal skills. Computers and software sometimes crash and boot students offline during testing, and cheating sometimes occurs (Musham 2004; Greenburg 1998).

  1. Computer aided selection of plant layout | Kitaw | Zede Journal

    African Journals Online (AJOL)

    This paper deals with the fundamental concepts of plant layout, in which the need for plant layout, the systematic and logical approaches to the problems, layout solutions and the objectives of plant layout are discussed. Further the approaches and the scoring techniques of the two available computer rout ines are ...

  2. A Computer-aided Learning Exercise in Spectrophotometry.

    Science.gov (United States)

    Pamula, Frederick

    1994-01-01

    Discusses the use of a computer simulation program in teaching the concepts of spectrophotometry. Introduces several parts of the program and program usage. Presents an assessment activity to evaluate students' mastery of material. Concludes with the advantages of this approach to the student and to the assessor. (ASK)

  3. Computer-aided visualization of database structural relationships

    International Nuclear Information System (INIS)

    Cahn, D.F.

    1980-04-01

    Interactive computer graphic displays can be extremely useful in augmenting understandability of data structures. In complexly interrelated domains such as bibliographic thesauri and energy information systems, node and link displays represent one such tool. This paper presents examples of data structure representations found useful in these domains and discusses some of their generalizable components. 2 figures

  4. NASA CST aids U.S. industry. [computational structures technology

    Science.gov (United States)

    Housner, Jerry M.; Pinson, Larry D.

    1993-01-01

    The effect of NASA's computational structures Technology (CST) research on aerospace vehicle design and operation is discussed. The application of this research to proposed version of a high-speed civil transport, to composite structures in aerospace, to the study of crack growth, and to resolving field problems is addressed.

  5. Computer-aided analysis of grain growth in metals

    DEFF Research Database (Denmark)

    Klimanek, P.; May, C.; Richter, H.

    1993-01-01

    Isothermal grain growth in aluminium, copper and alpha-iron was investigated experimentally at elevated temperatures and quantitatively interpreted by computer simulation on the base of a statistical model described in [4,5,6]. As it is demonstrated for the grain growth kinetics, the experimental...

  6. Computer-aided root -locus numerical technique | Zubair | Nigerian ...

    African Journals Online (AJOL)

    ... which were analyzed, simplified and coded into computer programs. The geometric properties of the root-loci obtained with this technique are found to conform to those root described in the literature. Root-loci are drawn to scale instead of rough sketches. Keywords: control system, stability, transient response, root-locus, ...

  7. Computer Aided Model Development for Automatic Tool Wear ...

    African Journals Online (AJOL)

    The pre-processing operations on the images (taken on photographic cards) included scanning, in order to transfer onto a computer and convert them to digital images. Thresholding and segmentation were done in order to convert the altered background of the scanned images to a pure white background; the images were ...

  8. Wearable Computing in E-education

    Directory of Open Access Journals (Sweden)

    Aleksandra Labus

    2015-03-01

    Full Text Available Emerging technologies such as mobile computing, sensors and sensor networks, and augmented reality have led to innovations in the field of wearable computing. Devices such as smart watches and smart glasses allow users to interact with devices worn under, with, or on top of clothing. This paper analyzes the possibilities of application of wearable computing in e-education. The focus is on integration of wearables into e-learning systems, in order to support ubiquitous learning, interaction and collaborative work. We present a model for integration of wearable technology in an e-education system and discuss technical, pedagogical and social aspects.

  9. "If you don't abstain, you will die of AIDS": AIDS education in Kenyan public schools.

    Science.gov (United States)

    Njue, Carolyne; Nzioka, Charles; Ahlberg, Beth-Maina; Pertet, Anne M; Voeten, Helene A C M

    2009-04-01

    We explored constraints of implementing AIDS education in public schools in Kenya. Sixty interviews with teachers and 60 focus group discussions with students were conducted in 21 primary and nine secondary schools. System/school-level constraints included lack of time in the curriculum, limited reach of secondary-school students (because AIDS education is embedded in biology, which is not compulsory), and disapproval of openness about sex and condoms by the Ministry of Education and parents. Alternative strategies to teach about AIDS had their own constraints. Teachers lacked training and support and felt uncomfortable with the topic. They were not used to interactive teaching methods and sometimes breached confidentiality. Teachers' negative attitudes constrained students from seeking information. Training interventions should be provided to teachers to increase their self-confidence, foster more positive attitudes, and stimulate interactive teaching methods. The Ministry of Education needs to have a clear policy toward the promotion of condoms.

  10. A Comparative Evaluation of Two Interventions for Educator Training in HIV/AIDS in South Africa

    Science.gov (United States)

    Chao, Li-Wei; Gow, Jeff; Akintola, Olagoke; Pauly, Mark

    2010-01-01

    The purpose of this study was to compare two different methods to teach educators about HIV/AIDS. Sixty educators were selected from eight schools in KwaZulu-Natal Province, South Africa, to undergo HIV/AIDS training using an interactive CD-ROM intervention. Another sixty educators from other schools were selected to undergo a two-day Life Skills…

  11. Poz-itively Transformational: Sex Workers and HIV/AIDS Education

    Science.gov (United States)

    Hill, Robert J.

    2005-01-01

    HIV and AIDS are complex events that offer numerous opportunities for adult education. However, mainstream education on this issue has often not been relevant to a number of subpopulations, including sex workers. This chapter explores sources and content of HIV/AIDS education in the sex work industry (including art and the Internet) and suggests…

  12. Equipping educators to address HIV and AIDS: A review of selected ...

    African Journals Online (AJOL)

    The purpose of this article is to focus on a spectrum of educational initiatives in sub-Saharan Africa and South Africa which are designed to equip educators to be informed about, and to manage, HIV and AIDS in their personal and professional lives. Criteria for inclusion in the review are that the HIV and AIDS education ...

  13. Students Computer Skills in Faculty of Education

    OpenAIRE

    Mehmet Caglar; Mukaddes Sakalli Demirok

    2010-01-01

    Nowadays; the usage of technology is not a privilege but an obligation. Technological developments influence structures andfunctions of educational institutions. It is also expected from the teachers that they integrate technology in their lessons inorder to educate the individuals of information society. This research has covered 145(68 female, 78 male) students, studying inNear East University Faculty of Education. The Computer Skills Scale developed by Güçlü (2010) was used as a data colle...

  14. Education through the prism of computation

    Science.gov (United States)

    Kaurov, Vitaliy

    2014-03-01

    With the rapid development of technology, computation claims its irrevocable place among research components of modern science. Thus to foster a successful future scientist, engineer or educator we need to add computation to the foundations of scientific education. We will discuss what type of paradigm shifts it brings to these foundations on the example of Wolfram Science Summer School. It is one of the most advanced computational outreach programs run by Wolfram Foundation, welcoming participants of almost all ages and backgrounds. Centered on complexity science and physics, it also covers numerous adjacent and interdisciplinary fields such as finance, biology, medicine and even music. We will talk about educational and research experiences in this program during the 12 years of its existence. We will review statistics and outputs the program has produced. Among these are interactive electronic publications at the Wolfram Demonstrations Project and contributions to the computational knowledge engine Wolfram|Alpa.

  15. Computer-aided Framework for Design of Pure, Mixed and Blended Products

    DEFF Research Database (Denmark)

    Cignitti, Stefano; Zhang, Lei; Gani, Rafiqul

    2015-01-01

    Design of novel chemical products with process and application considerations is an emerging topic in thefield of chemical and biochemical engineering. Methods, such as Computer Aided Molecular Design(CAMD) [1] and Computer-aided Mixture and Blend Design (CAMbD) [2], provide the possibility...... of designing such products. However, these product design problems can quickly become large and difficult, if not infeasible, to solve through mathematical optimization. In addition, considerations of process,application, special product attributes, economic feasibility, environmental and sustainability...... metrics that must be included in today’s product designs, consequently makes the problem harder to mathematically formulate and to solve.In this work, a framework for computer-aided design of pure, mixed and blended chemical products hasbeen developed. The framework is a systematic approach to formulate...

  16. The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

    Science.gov (United States)

    Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

    Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

  17. Chapter 6 – Computer-Aided Molecular Design and Property Prediction

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Zhang, L.; Kalakul, Sawitree

    2017-01-01

    to meet the global challenges of resources, competition, and demand. Design/development of these products mostly follows experiment-based trial and error approaches. With the availability of reliable property prediction models, however, computer-aided techniques have become popular, at least...... for the initial stages of the design/development process. Therefore, computer-aided molecular design and property prediction techniques are two topics that play important roles in chemical product design, analysis, and application. In this chapter, an overview of the concepts, methods, and tools related...... to these two topics are given. In addition, a generic computer-aided framework for the design of molecules, mixtures, and blends is presented. The application of the framework is highlighted for molecular products through two case studies involving the design of refrigerants and surfactants....

  18. Automatic computer aided analysis algorithms and system for adrenal tumors on CT images.

    Science.gov (United States)

    Chai, Hanchao; Guo, Yi; Wang, Yuanyuan; Zhou, Guohui

    2017-12-04

    The adrenal tumor will disturb the secreting function of adrenocortical cells, leading to many diseases. Different kinds of adrenal tumors require different therapeutic schedules. In the practical diagnosis, it highly relies on the doctor's experience to judge the tumor type by reading the hundreds of CT images. This paper proposed an automatic computer aided analysis method for adrenal tumors detection and classification. It consisted of the automatic segmentation algorithms, the feature extraction and the classification algorithms. These algorithms were then integrated into a system and conducted on the graphic interface by using MATLAB Graphic user interface (GUI). The accuracy of the automatic computer aided segmentation and classification reached 90% on 436 CT images. The experiments proved the stability and reliability of this automatic computer aided analytic system.

  19. Diagnosis by computer-aided tomography in patients with carcinomas in the rectum-sigma area

    International Nuclear Information System (INIS)

    Gnann, H.; Huebener, K.H.; Ahlemann, L.M.; Harms, S.

    1984-01-01

    In a retrospective study on the patients at Tuebingen between 1977 and 1980, the diagnostic value of computer-aided tomography was investigated in 232 cases of carcinomas in the rectum-sigma area. 192 examinations were post-operative. Whether computer-aided tomography will catch on as a staging measure in the pre-operative phase must for now remain unanswered until prospective studies on a large number of patients have been carried through. However, it is useful as a decision-taking aid as regards the choice of the operation method and to clarify whether the carcinoma is operable. Far more important in view of the known high rate of recurvency and metastatic spread seems to be the role of computer-aided tomography in the aftercare especially of those patients who had their rectum removed: the diagnosis of the recidivation permits direct therapeutic action (a second operation, radiation therapy) at an early date. The search for clinically not previously known recidivations revealed that computer-aided tomography had in 124 patients with operated rectal carcinoma a high sensitivity of 98 per cent, a specificity of 87 per cent and an accuracy of 91.9 percent. How long after the operation CAT checks should be carried through is quite as uncertain at present as the role of CAT in the staging of those tumors. The authors recommend intervals of 2-3 months within the first two post-operative years. (orig.) [de

  20. Bioassay Phantoms Using Medical Images and Computer Aided Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Dr. X. Geroge Xu

    2011-01-28

    A radiation bioassay program relies on a set of standard human phantoms to calibrate and assess radioactivity levels inside a human body for radiation protection and nuclear medicine imaging purposes. However, the methodologies in the development and application of anthropomorphic phantoms, both physical and computational, had mostly remained the same for the past 40 years. We herein propose a 3-year research project to develop medical image-based physical and computational phantoms specifically for radiation bioassay applications involving internally deposited radionuclides. The broad, long-term objective of this research was to set the foundation for a systematic paradigm shift away from the anatomically crude phantoms in existence today to realistic and ultimately individual-specific bioassay methodologies. This long-term objective is expected to impact all areas of radiation bioassay involving nuclear power plants, U.S. DOE laboratories, and nuclear medicine clinics.

  1. COMPUTER-AIDED IDENTIFICATION OF ENVIRONMENTAL IMPACTS OF BUSINESSES

    Directory of Open Access Journals (Sweden)

    Halina Marczak

    2015-11-01

    Full Text Available Discussed elements of the computer databases used in “input-output” analysis method to identify enterprise impact on the environment. Presented “input-output” database parameters essential for a company performing road transport of finished products. Presented a method for determining parameters: energy consumption by means of road transport and the emissions amount with exhaust fumes from vehicles. Discussed parameters of the computer databases needed to calculate the amount of fees for use of the environment. These data and amount of fees for environment usage may be useful in assessing the scale of the impact on environment by businesses. Described a method for determining the fee for gases and dust emitted into the air from combustion of fuels in internal combustion engines.

  2. Computer-aided diagnosis of pneumoconiosis in CT images

    International Nuclear Information System (INIS)

    Morikubo, Hiroshi; Shida, Hisao

    1991-01-01

    The classification of chest radiographs on pneumoconiosis has been widely used for the purpose of epidemiologic study and mass surveillance in Japan. We are developing an automated method for determining a class of rounded opacities of pneumoconiosis in CT images. The image processing computer is NEXUS 6400 equipped with pipeline processor, and the CT equipment is TCT-900S. CT images are analyzed by the image processing computer. The processes include a smoothing by median filter, a transformation into binary thresholded picture, rejections of frame area (chest wall and mediastinum), labeling of lung field small pictures, identifying pneumoconiotic small rounded opacities and calculations of sizes and profusions. In our investigation by this system, the diagnostic accuracy was 85.7% dealing with 14 CT images. (author)

  3. Bioassay Phantoms Using Medical Images and Computer Aided Manufacturing

    International Nuclear Information System (INIS)

    Xu, X. Geroge

    2011-01-01

    A radiation bioassay program relies on a set of standard human phantoms to calibrate and assess radioactivity levels inside a human body for radiation protection and nuclear medicine imaging purposes. However, the methodologies in the development and application of anthropomorphic phantoms, both physical and computational, had mostly remained the same for the past 40 years. We herein propose a 3-year research project to develop medical image-based physical and computational phantoms specifically for radiation bioassay applications involving internally deposited radionuclides. The broad, long-term objective of this research was to set the foundation for a systematic paradigm shift away from the anatomically crude phantoms in existence today to realistic and ultimately individual-specific bioassay methodologies. This long-term objective is expected to impact all areas of radiation bioassay involving nuclear power plants, U.S. DOE laboratories, and nuclear medicine clinics.

  4. Computer aided hydraulic design of axial flow pump impeller

    International Nuclear Information System (INIS)

    Sreedhar, B.K.; Rao, A.S.L.K.; Kumaraswamy, S.

    1994-01-01

    Pumps are the heart of any power plant and hence their design requires great attention. Computers with their potential for rapid computation can be successfully employed in the design and manufacture of these machines. The paper discusses a program developed for the hydraulic design of axial flow pump impeller. The program, written in FORTRAN 77, is interactive and performs the functions of design calculation, drafting and generation of numerical data for blade manufacture. The drafting function, which makes use of the software ACAD, is carried out automatically by means of suitable interface programs. In addition data for blade manufacture is also generated in either the x-y-z or r-θ-z system. (author). 4 refs., 3 figs

  5. Computers and terminals as an aid to international technology transfer

    Science.gov (United States)

    Sweeney, W. T.

    1974-01-01

    As technology transfer becomes more popular and proves to be an economical method for companies of all sizes to take advantage of a tremendous amount of new and available technology from sources all over the world, the introduction of computers and terminals into the international technology transfer process is proving to be a successful method for companies to take part in this beneficial approach to new business opportunities.

  6. Imaging workstations for computer-aided primatology: promises and pitfalls.

    Science.gov (United States)

    Vannier, M W; Conroy, G C

    1989-01-01

    In this paper, the application of biomedical imaging workstations to primatology will be explained and evaluated. The technological basis, computer hardware and software aspects, and the various uses of several types of workstations will all be discussed. The types of workstations include: (1) Simple - these display-only workstations, which function as electronic light boxes, have applications as terminals to picture archiving and communication (PAC) systems. (2) Diagnostic reporting - image-processing workstations that include the ability to perform straightforward manipulations of gray scale and raw data values will be considered for operations such as histogram equalization (whether adaptive or global), gradient edge finders, contour generation, and region of interest, as well as other related functions. (3) Manipulation systems - three-dimensional modeling and computer graphics with application to radiation therapy treatment planning, and surgical planning and evaluation will be considered. A technology of prime importance in the function of these workstations lies in communications and networking. The hierarchical organization of an electronic computer network and workstation environment with the interrelationship of simple, diagnostic reporting, and manipulation workstations to a coaxial or fiber optic network will be analyzed.

  7. High-Productivity Computing in Computational Physics Education

    Science.gov (United States)

    Tel-Zur, Guy

    2011-03-01

    We describe the development of a new course in Computational Physics at the Ben-Gurion University. This elective course for 3rd year undergraduates and MSc. students is being taught during one semester. Computational Physics is by now well accepted as the Third Pillar of Science. This paper's claim is that modern Computational Physics education should deal also with High-Productivity Computing. The traditional approach of teaching Computational Physics emphasizes ``Correctness'' and then ``Accuracy'' and we add also ``Performance.'' Along with topics in Mathematical Methods and case studies in Physics the course deals a significant amount of time with ``Mini-Courses'' in topics such as: High-Throughput Computing - Condor, Parallel Programming - MPI and OpenMP, How to build a Beowulf, Visualization and Grid and Cloud Computing. The course does not intend to teach neither new physics nor new mathematics but it is focused on an integrated approach for solving problems starting from the physics problem, the corresponding mathematical solution, the numerical scheme, writing an efficient computer code and finally analysis and visualization.

  8. Student Financial Aid: Monitoring Aid Greater Than Federally Defined Need Could Help Address Student Loan Indebtedness. Report to the Honorable Rod Paige, Secretary of Education.

    Science.gov (United States)

    Ashby, Cornelia M.

    This study was conducted to determine how often federal financial aid recipients received aid that was greater than their federally defined need and what cost or other implications might result from changing the Higher Education Act (HEA) to limit such aid. Data came from the 1999-2000 National Postsecondary Student Aid Study for full-time,…

  9. Early experiences of computer-aided assessment and administration when teaching computer programming

    Directory of Open Access Journals (Sweden)

    Abdullah Mohd Zin

    1993-12-01

    Full Text Available This paper describes early experiences with the Ceilidh system currently being piloted at over 30 institutions of higher education. Ceilidh is a course-management system for teaching computer programming whose core is an auto-assessment facility. This facility automatically marks students programs from a range of perspectives, and may be used in an iterative manner, enabling students to work towards a target level of attainment. Ceilidh also includes extensive courseadministration and progress-monitoring facilities, as well as support for other forms of assessment including short-answer marking and the collation of essays for later hand-marking. The paper discusses the motivation for developing Ceilidh, outlines its major facilities, then summarizes experiences of developing and actually using it at the coal-face over three years of teaching.

  10. Computer-aided Framework for Design of Pure, Mixed and Blended Products

    DEFF Research Database (Denmark)

    Cignitti, Stefano; Zhang, Lei; Gani, Rafiqul

    2015-01-01

    This paper presents a framework for computer-aided design of pure, mixed and blended chemical based products. The framework is a systematic approach to convert a Computer-aided Molecular, Mixture and Blend Design (CAMbD) formulation, based on needs and target properties, into a mixed integer non......-linear program (MINLP). TheMINLP is sequentially solved through a decomposed optimization approach to solve the possibly large MINLP in a smaller set of sub-problems. The framework application is highlighted through a solvent design case study....

  11. A Multi-Step and Multi-Level Approach for Computer Aided Molecular Design

    DEFF Research Database (Denmark)

    Harper, Peter Mathias; Gani, Rafiqul

    2001-01-01

    A general multi-step approach for setting up, solving and solution analysis of computer aided molecular design (CAMD) problems is presented. The approach differs from previous work within the field of CAMD since it also addresses the need for a computer aided problem formulation and result analysis....... The problem formulation step incorporates a knowledge base for the identification and setup of the design criteria. Candidate compounds are identified using a multi-level generate and test CAMD solution algorithm capable of designing molecules having a high level of molecular detail. A post solution step...

  12. Energy-aware memory management for embedded multimedia systems a computer-aided design approach

    CERN Document Server

    Balasa, Florin

    2011-01-01

    Energy-Aware Memory Management for Embedded Multimedia Systems: A Computer-Aided Design Approach presents recent computer-aided design (CAD) ideas that address memory management tasks, particularly the optimization of energy consumption in the memory subsystem. It explains how to efficiently implement CAD solutions, including theoretical methods and novel algorithms. The book covers various energy-aware design techniques, including data-dependence analysis techniques, memory size estimation methods, extensions of mapping approaches, and memory banking approaches. It shows how these techniques

  13. Computer-aided detection system for lung cancer in computed tomography scans: review and future prospects.

    Science.gov (United States)

    Firmino, Macedo; Morais, Antônio H; Mendoça, Roberto M; Dantas, Marcel R; Hekis, Helio R; Valentim, Ricardo

    2014-04-08

    The goal of this paper is to present a critical review of major Computer-Aided Detection systems (CADe) for lung cancer in order to identify challenges for future research. CADe systems must meet the following requirements: improve the performance of radiologists providing high sensitivity in the diagnosis, a low number of false positives (FP), have high processing speed, present high level of automation, low cost (of implementation, training, support and maintenance), the ability to detect different types and shapes of nodules, and software security assurance. The relevant literature related to "CADe for lung cancer" was obtained from PubMed, IEEEXplore and Science Direct database. Articles published from 2009 to 2013, and some articles previously published, were used. A systemic analysis was made on these articles and the results were summarized. Based on literature search, it was observed that many if not all systems described in this survey have the potential to be important in clinical practice. However, no significant improvement was observed in sensitivity, number of false positives, level of automation and ability to detect different types and shapes of nodules in the studied period. Challenges were presented for future research. Further research is needed to improve existing systems and propose new solutions. For this, we believe that collaborative efforts through the creation of open source software communities are necessary to develop a CADe system with all the requirements mentioned and with a short development cycle. In addition, future CADe systems should improve the level of automation, through integration with picture archiving and communication systems (PACS) and the electronic record of the patient, decrease the number of false positives, measure the evolution of tumors, evaluate the evolution of the oncological treatment, and its possible prognosis.

  14. Computer-aided diagnosis of liver tumors on computed tomography images.

    Science.gov (United States)

    Chang, Chin-Chen; Chen, Hong-Hao; Chang, Yeun-Chung; Yang, Ming-Yang; Lo, Chung-Ming; Ko, Wei-Chun; Lee, Yee-Fan; Liu, Kao-Lang; Chang, Ruey-Feng

    2017-07-01

    Liver cancer is the tenth most common cancer in the USA, and its incidence has been increasing for several decades. Early detection, diagnosis, and treatment of the disease are very important. Computed tomography (CT) is one of the most common and robust imaging techniques for the detection of liver cancer. CT scanners can provide multiple-phase sequential scans of the whole liver. In this study, we proposed a computer-aided diagnosis (CAD) system to diagnose liver cancer using the features of tumors obtained from multiphase CT images. A total of 71 histologically-proven liver tumors including 49 benign and 22 malignant lesions were evaluated with the proposed CAD system to evaluate its performance. Tumors were identified by the user and then segmented using a region growing algorithm. After tumor segmentation, three kinds of features were obtained for each tumor, including texture, shape, and kinetic curve. The texture was quantified using 3 dimensional (3-D) texture data of the tumor based on the grey level co-occurrence matrix (GLCM). Compactness, margin, and an elliptic model were used to describe the 3-D shape of the tumor. The kinetic curve was established from each phase of tumor and represented as variations in density between each phase. Backward elimination was used to select the best combination of features, and binary logistic regression analysis was used to classify the tumors with leave-one-out cross validation. The accuracy and sensitivity for the texture were 71.82% and 68.18%, respectively, which were better than for the shape and kinetic curve under closed specificity. Combining all of the features achieved the highest accuracy (58/71, 81.69%), sensitivity (18/22, 81.82%), and specificity (40/49, 81.63%). The Az value of combining all features was 0.8713. Combining texture, shape, and kinetic curve features may be able to differentiate benign from malignant tumors in the liver using our proposed CAD system. Copyright © 2017 Elsevier B.V. All

  15. Computer aided fault tree construction for electrical systems

    International Nuclear Information System (INIS)

    Fussell, J.B.

    1975-01-01

    A technique is presented for automated construction of the Boolean failure logic diagram, called the fault tree, for electrical systems. The method is a technique for synthesizing a fault tree from system-independent component characteristics. Terminology is defined and heuristic examples are given for all phases of the model. The computer constructed fault trees are in conventional format, use conventional symbols, and are deductively constructed from the main failure of interest to the individual component failures. The synthesis technique is generally applicable to automated fault tree construction for other types of systems

  16. Evaluation of an HIV/AIDS peer education programme South African ...

    African Journals Online (AJOL)

    To evaluate a South African workplace HIV I AIDS peer-education programme running since 1997. Methods ... and was modelled on a similar workplace-based programme run by the Zimbabwe AIDS Prevention Project (ZAPP) in ..... HIV I AIDS prevention program at the workplace. Journal of Health Communication 2003; 8:.

  17. Funding Education beyond High School: The Guide to Federal Student Aid 2010-11

    Science.gov (United States)

    US Department of Education, 2010

    2010-01-01

    Federal student aid is a financial help for eligible students to pay for educational expenses at an eligible postsecondary school (e.g., college, vocational school, graduate school). There are three categories of federal student aid: grants, workstudy, and loans. Federal student aid covers expenses such as tuition and fees, room and board, books…

  18. Evaluation of an HIV/AIDS peer education programme in a South ...

    African Journals Online (AJOL)

    Objectives. To evaluate a South African workplace HIV I AIDS peer-education programme running since 1997. Methods. In 2001 a cross-sectional study was done of 900 retail-section employees in three geographical areas. The study measured HIV I AIDS knowledge, attitudes towards people living with HIV I AIDS, belief ...

  19. Critics raise moral objections to Federal AIDS education classes.

    Science.gov (United States)

    1995-07-28

    Lawmakers and a handful of government employees have objected to the Federal government's programs to educate its employees about AIDS. At the June 22, 1995 hearing of the civil service subcommittee of the House Government Reform and Oversight Committee, protests were raised on religious or moral grounds. Thomas Herron, a supervisory logistics manager at the Naval Air Technical Services Facility in Philadelphia found the training to be against the principles of his faith. Rep. Robert K. Dornan (R-Calif) said his office was flooded with calls and letters from employees who raised concern that the training is being used to advance a redefinition of the family and is a blatant pro-homosexual agenda. Robert L. Maginnis, policy analyst for the conservative Family Research Council, faulted the training, saying it does little to change behavior that puts people at risk for HIV infection. Clinton administration officials testified at the meeting that the program is necessary to ensure both the safety of the workforce and employees' freedom from discrimination and harassment. Individual departments and agencies are responsible for developing their own AIDS training programs. According to Alan Heuerman, associate director for human resource systems service with the Office of Personnel Management, relatively few objections have been raised about the training.

  20. Shell stability analysis in a computer aided engineering (CAE) environment

    Science.gov (United States)

    Arbocz, J.; Hol, J. M. A. M.

    1993-01-01

    The development of 'DISDECO', the Delft Interactive Shell DEsign COde is described. The purpose of this project is to make the accumulated theoretical, numerical and practical knowledge of the last 25 years or so readily accessible to users interested in the analysis of buckling sensitive structures. With this open ended, hierarchical, interactive computer code the user can access from his workstation successively programs of increasing complexity. The computational modules currently operational in DISDECO provide the prospective user with facilities to calculate the critical buckling loads of stiffened anisotropic shells under combined loading, to investigate the effects the various types of boundary conditions will have on the critical load, and to get a complete picture of the degrading effects the different shapes of possible initial imperfections might cause, all in one interactive session. Once a design is finalized, its collapse load can be verified by running a large refined model remotely from behind the workstation with one of the current generation 2-dimensional codes, with advanced capabilities to handle both geometric and material nonlinearities.

  1. Computer aided design of architecture of degradable tissue engineering scaffolds.

    Science.gov (United States)

    Heljak, M K; Kurzydlowski, K J; Swieszkowski, W

    2017-11-01

    One important factor affecting the process of tissue regeneration is scaffold stiffness loss, which should be properly balanced with the rate of tissue regeneration. The aim of the research reported here was to develop a computer tool for designing the architecture of biodegradable scaffolds fabricated by melt-dissolution deposition systems (e.g. Fused Deposition Modeling) to provide the required scaffold stiffness at each stage of degradation/regeneration. The original idea presented in the paper is that the stiffness of a tissue engineering scaffold can be controlled during degradation by means of a proper selection of the diameter of the constituent fibers and the distances between them. This idea is based on the size-effect on degradation of aliphatic polyesters. The presented computer tool combines a genetic algorithm and a diffusion-reaction model of polymer hydrolytic degradation. In particular, we show how to design the architecture of scaffolds made of poly(DL-lactide-co-glycolide) with the required Young's modulus change during hydrolytic degradation.

  2. Three-dimensional computer aided design system for plant layout

    International Nuclear Information System (INIS)

    Yoshinaga, Toshiaki; Kiguchi, Takashi; Tokumasu, Shinji; Kumamoto, Kenjiro.

    1986-01-01

    The CAD system for three-dimensional plant layout planning, with which the layout of pipings, cable trays, air conditioning ducts and so on in nuclear power plants can be planned and designed effectively in a short period is reported. This system comprises the automatic routing system by storing the rich experience and know-how of designers in a computer as the knowledge, and deciding the layout automatically following the predetermined sequence by using these, the interactive layout system for reviewing the routing results from higher level and modifying to the optimum layout, the layout evaluation system for synthetically evaluating the layout from the viewpoint of the operability such as checkup and maintenance, and the data base system which enables these effective planning and design. In this report, the total constitution of this system and the technical features and effects of the individual subsystems are outlined. In this CAD system for three-dimensional plant layout planning, knowledge engineering, CAD/CAM, computer graphics and other latest technology were introduced, accordingly by applying this system to plant design, the design can be performed quickly, various case studies can be carried out at planning stage, and systematic and optimum layout planning becomes possible. (Kako, I.)

  3. Computer-aided performance monitoring program at Diablo Canyon

    International Nuclear Information System (INIS)

    Nelson, T.; Glynn, R. III; Kessler, T.C.

    1992-01-01

    This paper describes the thermal performance monitoring program at Pacific Gas ampersand Electric Company's (PG ampersand E's) Diablo Canyon Nuclear Power Plant. The plant performance monitoring program at Diablo Canyon uses the THERMAC performance monitoring and analysis computer software provided by Expert-EASE Systems. THERMAC is used to collect performance data from the plant process computers, condition that data to adjust for measurement errors and missing data points, evaluate cycle and component-level performance, archive the data for trend analysis and generate performance reports. The current status of the program is that, after a fair amount of open-quotes tuningclose quotes of the basic open-quotes thermal kitclose quotes models provided with the initial THERMAC installation, we have successfully baselined both units to cycle isolation test data from previous reload cycles. Over the course of the past few months, we have accumulated enough data to generate meaningful performance trends and, as a result, have been able to use THERMAC to track a condenser fouling problem that was costing enough megawatts to attract corporate-level attention. Trends from THERMAC clearly related the megawatt loss to a steadily degrading condenser cleanliness factor and verified the subsequent gain in megawatts after the condenser was cleaned. In the future, we expect to rebaseline THERMAC to a beginning of cycle (BOC) data set and to use the program to help track feedwater nozzle fouling

  4. Computer-Aided Design of RNA Origami Structures.

    Science.gov (United States)

    Sparvath, Steffen L; Geary, Cody W; Andersen, Ebbe S

    2017-01-01

    RNA nanostructures can be used as scaffolds to organize, combine, and control molecular functionalities, with great potential for applications in nanomedicine and synthetic biology. The single-stranded RNA origami method allows RNA nanostructures to be folded as they are transcribed by the RNA polymerase. RNA origami structures provide a stable framework that can be decorated with functional RNA elements such as riboswitches, ribozymes, interaction sites, and aptamers for binding small molecules or protein targets. The rich library of RNA structural and functional elements combined with the possibility to attach proteins through aptamer-based binding creates virtually limitless possibilities for constructing advanced RNA-based nanodevices.In this chapter we provide a detailed protocol for the single-stranded RNA origami design method using a simple 2-helix tall structure as an example. The first step involves 3D modeling of a double-crossover between two RNA double helices, followed by decoration with tertiary motifs. The second step deals with the construction of a 2D blueprint describing the secondary structure and sequence constraints that serves as the input for computer programs. In the third step, computer programs are used to design RNA sequences that are compatible with the structure, and the resulting outputs are evaluated and converted into DNA sequences to order.

  5. Volcanology Curricula Development Aided by Online Educational Resource

    Science.gov (United States)

    Poland, Michael P.; van der Hoeven Kraft, Katrien J.; Teasdale, Rachel

    2011-03-01

    Using On-Line Volcano Monitoring Data in College and University Courses: The Volcano Exploration Project: Pu`u `Ō`ō (VEPP); Hawaii Volcanoes National Park, Hawaii, 26-30 July 2010; Volcanic activity is an excellent hook for engaging college and university students in geoscience classes. An increasing number of Internet-accessible real-time and near-real time volcano monitoring data are now available and constitute an important resource for geoscience education; however, relatively few data sets are comprehensive, and many lack background information to aid in interpretation. In response to the need for organized, accessible, and well-documented volcano education resources, the U.S. Geological Survey's Hawaiian Volcano Observatory (HVO), in collaboration with NASA and the University of Hawai`i at Manoa, established the Volcanoes Exploration Project: Pu`u `Ō`ō (VEPP). The VEPP Web site (http://vepp.wr.usgs.gov) is an educational resource that provides access, in near real time, to geodetic, seismic, and geologic data from the active Pu`u `Ō`ō eruptive vent on Kilauea volcano, Hawaii, along with background and context information. A strength of the VEPP site is the common theme of the Pu`u `Ō`ō eruption, which allows the site to be revisited multiple times to demonstrate different principles and integrate many aspects of volcanology.

  6. Volcanology curricula development aided by online educational resource

    Science.gov (United States)

    Poland, Michael P.; van der Hoeven Kraft, Katrien J.; Teasdale, Rachel

    2011-01-01

    Volcanic activity is an excellent hook for engaging college and university students in geoscience classes. An increasing number of Internet-accessible real-time and near–real time volcano monitoring data are now available and constitute an important resource for geoscience education; however, relatively few data sets are comprehensive, and many lack background information to aid in interpretation. In response to the need for organized, accessible, and well-documented volcano education resources, the U.S. Geological Survey's Hawaiian Volcano Observatory (HVO), in collaboration with NASA and the University of Hawai`i at Manoa, established the Volcanoes Exploration Project: Pu`u `Ō`ō (VEPP). The VEPP Web site (http://vepp.wr.usgs.gov) is an educational resource that provides access, in near real time, to geodetic, seismic, and geologic data from the active Pu`u `Ō`ō eruptive vent on Kilauea volcano, Hawaii, along with background and context information. A strength of the VEPP site is the common theme of the Pu`u `Ō`ō eruption, which allows the site to be revisited multiple times to demonstrate different principles and integrate many aspects of volcanology.

  7. Custom-Made Computer-Aided-Design/Computer-Aided-Manufacturing Biphasic Calcium-Phosphate Scaffold for Augmentation of an Atrophic Mandibular Anterior Ridge

    Directory of Open Access Journals (Sweden)

    Francesco Guido Mangano

    2015-01-01

    Full Text Available This report documents the clinical, radiographic, and histologic outcome of a custom-made computer-aided-design/computer-aided-manufactured (CAD/CAM scaffold used for the alveolar ridge augmentation of a severely atrophic anterior mandible. Computed tomographic (CT images of an atrophic anterior mandible were acquired and modified into a 3-dimensional (3D reconstruction model; this was transferred to a CAD program, where a custom-made scaffold was designed. CAM software generated a set of tool-paths for the manufacture of the scaffold on a computer-numerical-control milling machine into the exact shape of the 3D design. A custom-made scaffold was milled from a synthetic micromacroporous biphasic calcium phosphate (BCP block. The scaffold closely matched the shape of the defect: this helped to reduce the time for the surgery and contributed to good healing. One year later, newly formed and well-integrated bone was clinically available, and two implants (AnyRidge, MegaGen, Gyeongbuk, South Korea were placed. The histologic samples retrieved from the implant sites revealed compact mature bone undergoing remodelling, marrow spaces, and newly formed trabecular bone surrounded by residual BCP particles. This study demonstrates that custom-made scaffolds can be fabricated by combining CT scans and CAD/CAM techniques. Further studies on a larger sample of patients are needed to confirm these results.

  8. A Simple and Resource-efficient Setup for the Computer-aided Drug Design Laboratory.

    Science.gov (United States)

    Moretti, Loris; Sartori, Luca

    2016-10-01

    Undertaking modelling investigations for Computer-Aided Drug Design (CADD) requires a proper environment. In principle, this could be done on a single computer, but the reality of a drug discovery program requires robustness and high-throughput computing (HTC) to efficiently support the research. Therefore, a more capable alternative is needed but its implementation has no widespread solution. Here, the realization of such a computing facility is discussed, from general layout to technical details all aspects are covered. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Computer-aided drug discovery research at a global contract research organization.

    Science.gov (United States)

    Kitchen, Douglas B

    2017-03-01

    Computer-aided drug discovery started at Albany Molecular Research, Inc in 1997. Over nearly 20 years the role of cheminformatics and computational chemistry has grown throughout the pharmaceutical industry and at AMRI. This paper will describe the infrastructure and roles of CADD throughout drug discovery and some of the lessons learned regarding the success of several methods. Various contributions provided by computational chemistry and cheminformatics in chemical library design, hit triage, hit-to-lead and lead optimization are discussed. Some frequently used computational chemistry techniques are described. The ways in which they may contribute to discovery projects are presented based on a few examples from recent publications.

  10. A Forth interpreter and compiler's study for computer aided design

    International Nuclear Information System (INIS)

    Djebbar, F. Zohra Widad

    1986-01-01

    The wide field of utilization of FORTH leads us to develop an interpreter. It has been implemented on a MC 68000 microprocessor based computer, with ASTERIX, a UNIX-like operating system (real time system written by C.E.A.). This work has been done in two different versions: - The first one, fully written in C language, assures a good portability on a wide variety of microprocessors. But the performance estimations show off excessive execution times, and lead to a new optimized version. - This new version is characterized by the compilation of the most frequently used words of the FORTH basis. This allows us to get an interpreter with good performances and an execution speed close to the resulting one of the C compiler. (author) [fr

  11. Computer Aided Flowsheet Design using Group Contribution Methods

    DEFF Research Database (Denmark)

    Bommareddy, Susilpa; Eden, Mario R.; Gani, Rafiqul

    In this paper, a systematic group contribution based framework is presented for synthesis of process flowsheets from a given set of input and output specifications. Analogous to the group contribution methods developed for molecular design, the framework employs process groups to represent...... different unit operations in the system. Feasible flowsheet configurations are generated using efficient combinatorial algorithms and the performance of each candidate flowsheet is evaluated using a set of flowsheet properties. A systematic notation system called SFILES is used to store the structural...... information of each flowsheet to minimize the computational load and information storage. The design variables for the selected flowsheet(s) are identified through a reverse simulation approach and are used as initial estimates for rigorous simulation to verify the feasibility and performance of the design....

  12. Computer aided fixture design - A case based approach

    Science.gov (United States)

    Tanji, Shekhar; Raiker, Saiesh; Mathew, Arun Tom

    2017-11-01

    Automated fixture design plays important role in process planning and integration of CAD and CAM. An automated fixture setup design system is developed where when fixturing surfaces and points are described allowing modular fixture components to get automatically select for generating fixture units and placed into position with satisfying assembled conditions. In past, various knowledge based system have been developed to implement CAFD in practice. In this paper, to obtain an acceptable automated machining fixture design, a case-based reasoning method with developed retrieval system is proposed. Visual Basic (VB) programming language is used in integrating with SolidWorks API (Application programming interface) module for better retrieval procedure reducing computational time. These properties are incorporated in numerical simulation to determine the best fit for practical use.

  13. Proper medical diagnosis and treatment with computer aided system

    Science.gov (United States)

    Pedowski, Tomasz; Wasiewicz, Piotr; Maciejewski, Ryszard; Wallner, Grzegorz

    2009-06-01

    Nowadays computers successfully analyze medical data giving results used for futher treatment. Every year we develop new technology which gives us better and more precise diagnose. We chose esophageal manometry (EFT) which has been considered as a "gold standard" test for the evaluation of esophageal motility. EFT allows physicians to get informations about esophageal peristalsis, amplitude and duration of the esophageal contraction and liquid/viscous bolus transit time from mouth through stomach. We examined 80 patients during 2008 year. Everybody got EFT, endoscopy and X-Ray examination. It was important to ask about symptoms which we correlate and connect with data from EFT. We tried to find a good algorithm for this job in order to do a simple and helpful tool for physician to make right diagnose. Connection between data and symptoms seems to be right and clear, but finding a good algorithm for given data is the main problem.

  14. Computer-Aided Model Based Analysis for Design and Operation of a Copolymerization Process

    DEFF Research Database (Denmark)

    Lopez-Arenas, Maria Teresa; Sales-Cruz, Alfonso Mauricio; Gani, Rafiqul

    2006-01-01

    The advances in computer science and computational algorithms for process modelling, process simulation, numerical methods and design/synthesis algorithms, makes it advantageous and helpful to employ computer-aided modelling systems and tools for integrated process analysis. This is illustrated....... This will allow analysis of the process behaviour, contribute to a better understanding of the polymerization process, help to avoid unsafe conditions of operation, and to develop operational and optimizing control strategies. In this work, through a computer-aided modeling system ICAS-MoT, two first......-principles models have been investigated with respect to design and operational issues for solution copolymerization reactors in general, and for the methyl methacrylate/vinyl acetate system in particular. The Model 1 is taken from literature and is commonly used for low conversion region, while the Model 2 has...

  15. A computer-aided diagnostic and troubleshooting system for fuel cell power plants

    International Nuclear Information System (INIS)

    Unkle, C.R.

    1990-10-01

    This Interactive Computer-Aided Troubleshooting System (ICATS) was designed as a troubleshooting aid for the Tokyo Electric Power Company (TEPCO) 11-megawatt dc Module (DCM). ICATS represents an integration of the System Testability and Maintenance Program (STAMP reg-sign) and the Portable Interactive Troubleshooter (POINTER trademark) software packages developed by ARINC Research Corporation. ICATS was designed to aid in the fault isolation of shutdown conditions that may occur in the DCM during on-load operations and start-up, and hold conditions that may occur during start-up. ICATS may also be used to help fault-isolate a return-to-standby condition occurring from on-load operation of the DCM. This report describes the development of ICATS and the ICATS functional design. The unique features of STAMP and POINTER, which allow for diagnostic aids to be designed for systems not yet built and operating, are also described. 10 refs., 21 figs., 6 tabs

  16. Creating an Electronic Reference and Information Database for Computer-aided ECM Design

    Science.gov (United States)

    Nekhoroshev, M. V.; Pronichev, N. D.; Smirnov, G. V.

    2018-01-01

    The paper presents a review on electrochemical shaping. An algorithm has been developed to implement a computer shaping model applicable to pulse electrochemical machining. For that purpose, the characteristics of pulse current occurring in electrochemical machining of aviation materials have been studied. Based on integrating the experimental results and comprehensive electrochemical machining process data modeling, a subsystem for computer-aided design of electrochemical machining for gas turbine engine blades has been developed; the subsystem was implemented in the Teamcenter PLM system.

  17. Evolution of facility layout requirements and CAD [computer-aided design] system development

    International Nuclear Information System (INIS)

    Jones, M.

    1990-06-01

    The overall configuration of the Superconducting Super Collider (SSC) including the infrastructure and land boundary requirements were developed using a computer-aided design (CAD) system. The evolution of the facility layout requirements and the use of the CAD system are discussed. The emphasis has been on minimizing the amount of input required and maximizing the speed by which the output may be obtained. The computer system used to store the data is also described

  18. Traditional Engineering Graphics versus Computer-Aided Drafting: A View from Academe.

    Science.gov (United States)

    Foster, Robert J.

    1987-01-01

    Argues for a legitimate role of manually expressed engineering graphics within engineering education as a needed support for computer-assisted drafting work. Discusses what and how students should learn as well as trends in engineering graphics education. Compares and contrasts manual and computer drafting methods. (CW)

  19. Second Asia-Pacific Conference on the Computer Aided System Engineering

    CERN Document Server

    Chaczko, Zenon; Jacak, Witold; Łuba, Tadeusz; Computational Intelligence and Efficiency in Engineering Systems

    2015-01-01

    This carefully edited and reviewed volume addresses the increasingly popular demand for seeking more clarity in the data that we are immersed in. It offers excellent examples of the intelligent ubiquitous computation, as well as recent advances in systems engineering and informatics. The content represents state-of-the-art foundations for researchers in the domain of modern computation, computer science, system engineering and networking, with many examples that are set in industrial application context. The book includes the carefully selected best contributions to APCASE 2014, the 2nd Asia-Pacific Conference on  Computer Aided System Engineering, held February 10-12, 2014 in South Kuta, Bali, Indonesia. The book consists of four main parts that cover data-oriented engineering science research in a wide range of applications: computational models and knowledge discovery; communications networks and cloud computing; computer-based systems; and data-oriented and software-intensive systems.

  20. Computer-aided detection (CAD) in mammography: Does it help the junior or the senior radiologist?

    International Nuclear Information System (INIS)

    Balleyguier, Corinne; Kinkel, Karen; Fermanian, Jacques; Malan, Sebastien; Djen, Germaine; Taourel, Patrice; Helenon, Olivier

    2005-01-01

    Objectives: To evaluate the impact of a computer-aided detection (CAD) system on the ability of a junior and senior radiologist to detect breast cancers on mammograms, and to determine the potential of CAD as a teaching tool in mammography. Methods: Hundred biopsy-proven cancers and 100 normal mammograms were randomly analyzed by a CAD system. The sensitivity (Se) and specificity (Sp) of the CAD system were calculated. In the second phase, to simulate daily practice, 110 mammograms (97 normal or with benign lesions, and 13 cancers) were examined independently by a junior and a senior radiologist, with and without CAD. Interpretations were standardized according to BI-RADS classification. Sensitivity, Specificity, positive and negative predictive values (PPV, NPV) were calculated for each session. Results: For the senior radiologist, Se slightly improved from 76.9 to 84.6% after CAD analysis (NS) (one case of clustered microcalcifications case overlooked by the senior radiologist was detected by CAD). Sp, PPV and PNV did not change significantly. For the junior radiologist, Se improved from 61.9 to 84.6% (significant change). Three cancers overlooked by the junior radiologist were detected by CAD. Sp was unchanged. Conclusion: CAD mammography proved more useful for the junior than for the senior radiologist, improving sensitivity. The CAD system may represent a useful educational tool for mammography

  1. Computer-aided design in power engineering. Application of software tools

    Energy Technology Data Exchange (ETDEWEB)

    Stojkovic, Zlatan

    2012-07-01

    Demonstrates the use software tools in the practice of design in the field of power systems. Presents many applications in the design in the field of power systems. Useful for educative purposes and practical work. This textbooks demonstrates the application of software tools in solving a series of problems from the field of designing power system structures and systems. It contains four chapters: The first chapter leads the reader through all the phases necessary in the procedures of computer aided modeling and simulation. It guides through the complex problems presenting on the basis of eleven original examples. The second chapter presents application of software tools in power system calculations of power systems equipment design. Several design example calculations are carried out using engineering standards like MATLAB, EMTP/ATP, Excel and Access, AutoCAD and Simulink. The third chapters focuses on the graphical documentation using a collection of software tools (AutoCAD, EPLAN, SIMARIS SIVACON, SIMARIS DESIGN) which enable the complete automation of the development of graphical documentation of a power systems. In the fourth chapter, the application of software tools in the project management in power systems is discussed. Here, the emphasis is put on the standard software MS Excel and MS Project.

  2. Computer aided detection of oral lesions on CT images

    International Nuclear Information System (INIS)

    Galib, S.; Islam, F.; Lee, H.K.; Abir, M.

    2015-01-01

    Oral lesions are important findings on computed tomography (CT) images. In this study, a fully automatic method to detect oral lesions in mandibular region from dental CT images is proposed. Two methods were developed to recognize two types of lesions namely (1) Close border (CB) lesions and (2) Open border (OB) lesions, which cover most of the lesion types that can be found on CT images. For the detection of CB lesions, fifteen features were extracted from each initial lesion candidates and multi layer perceptron (MLP) neural network was used to classify suspicious regions. Moreover, OB lesions were detected using a rule based image processing method, where no feature extraction or classification algorithm were used. The results were validated using a CT dataset of 52 patients, where 22 patients had abnormalities and 30 patients were normal. Using non-training dataset, CB detection algorithm yielded 71% sensitivity with 0.31 false positives per patient. Furthermore, OB detection algorithm achieved 100% sensitivity with 0.13 false positives per patient. Results suggest that, the proposed framework, which consists of two methods, has the potential to be used in clinical context, and assist radiologists for better diagnosis

  3. Computer-Aided Approaches for Targeting HIVgp41

    Directory of Open Access Journals (Sweden)

    William J. Allen

    2012-08-01

    Full Text Available Virus-cell fusion is the primary means by which the human immunodeficiency virus-1 (HIV delivers its genetic material into the human T-cell host. Fusion is mediated in large part by the viral glycoprotein 41 (gp41 which advances through four distinct conformational states: (i native, (ii pre-hairpin intermediate, (iii fusion active (fusogenic, and (iv post-fusion. The pre-hairpin intermediate is a particularly attractive step for therapeutic intervention given that gp41 N-terminal heptad repeat (NHR and C‑terminal heptad repeat (CHR domains are transiently exposed prior to the formation of a six-helix bundle required for fusion. Most peptide-based inhibitors, including the FDA‑approved drug T20, target the intermediate and there are significant efforts to develop small molecule alternatives. Here, we review current approaches to studying interactions of inhibitors with gp41 with an emphasis on atomic-level computer modeling methods including molecular dynamics, free energy analysis, and docking. Atomistic modeling yields a unique level of structural and energetic detail, complementary to experimental approaches, which will be important for the design of improved next generation anti-HIV drugs.

  4. Computer aided design of fast neutron therapy units

    International Nuclear Information System (INIS)

    Gileadi, A.E.; Gomberg, H.J.; Lampe, I.

    1980-01-01

    Conceptual design of a radiation-therapy unit using fusion neutrons is presently being considered by KMS Fusion, Inc. As part of this effort, a powerful and versatile computer code, TBEAM, has been developed which enables the user to determine physical characteristics of the fast neutron beam generated in the facility under consideration, using certain given design parameters of the facility as inputs. TBEAM uses the method of statistical sampling (Monte Carlo) to solve the space, time and energy dependent neutron transport equation relating to the conceptual design described by the user-supplied input parameters. The code traces the individual source neutrons as they propagate throughout the shield-collimator structure of the unit, and it keeps track of each interaction by type, position and energy. In its present version, TBEAM is applicable to homogeneous and laminated shields of spherical geometry, to collimator apertures of conical shape, and to neutrons emitted by point sources or such plate sources as are used in neutron generators of various types. TBEAM-generated results comparing the performance of point or plate sources in otherwise identical shield-collimator configurations are presented in numerical form. (H.K.)

  5. Aiding Design of Wave Energy Converters via Computational Simulations

    Science.gov (United States)

    Jebeli Aqdam, Hejar; Ahmadi, Babak; Raessi, Mehdi; Tootkaboni, Mazdak

    2015-11-01

    With the increasing interest in renewable energy sources, wave energy converters will continue to gain attention as a viable alternative to current electricity production methods. It is therefore crucial to develop computational tools for the design and analysis of wave energy converters. A successful design requires balance between the design performance and cost. Here an analytical solution is used for the approximate analysis of interactions between a flap-type wave energy converter (WEC) and waves. The method is verified using other flow solvers and experimental test cases. Then the model is used in conjunction with a powerful heuristic optimization engine, Charged System Search (CSS) to explore the WEC design space. CSS is inspired by charged particles behavior. It searches the design space by considering candidate answers as charged particles and moving them based on the Coulomb's laws of electrostatics and Newton's laws of motion to find the global optimum. Finally the impacts of changes in different design parameters on the power takeout of the superior WEC designs are investigated. National Science Foundation, CBET-1236462.

  6. The computer-aided operation of the N4 series

    International Nuclear Information System (INIS)

    Guesnier, G.; Bouard, J.P.

    1998-01-01

    Designed at the beginning of the eighties, subject of many months of evaluation and validation between 1987 and 1996 on a full scope simulator, the computer-based control room and the fully integrated computerised I and C system of the N4 series are now under operation. Today, Chooz NPP unit 1 and 2 are connected to the French grid (since 1996) and the unit of Civaux 1 is in the final phase of commissioning tests. Start up of the last (Civaux 2) is scheduled in summer 1998. The commissioning hitches inherent to any innovation have been resolved, the safety authority has granted operating licenses. This short but significant operating time associated to the commissioning phases have generated a first positive experience feedback which has consolidated the decision made by EDF in the design of this project, as well on the MMI point of view as on the I and C architecture one. Finally it has led to the decision taken by EDF, its European partners in the EURs (European Utilities Requirements) and the German utilities partnering the EPR project (European Pressurised Reactor), to choose this control-room concept for future plants. (author)

  7. CADMIO: computer aided design for medical information objects.

    Science.gov (United States)

    Minarelli, D V; Ferri, F; Pisanelli, D M; Ricci, F L; Tittarelli, F

    1995-01-01

    The growth of the computational capability and the tools of graphic software is nowadays available in an integrated manner into the development environments, thus permitting the realization of tool kits capable of handling information that is complex and of different kinds such as the typical medical information. This has given a great impulse to the creation of electronic medical folders joining together with new and stimulating functionality with respect to the usual paper document [1]. In the present work, we propose a tool capable of defining a multimedia electronic medical folder and representing its architecture through a layout that is formed on the basis of the particular data types to be handled. This tool is capable of providing an integrated view of data that, even though they are close in cognitive sense, are often stored and represented apart in the practice. Different approaches to the browsing feature are giving within the system, thus the user can personalize the way of viewing the information stored into the folder or can let the system guide the browsing.

  8. An Empathic Avatar in a Computer-Aided Learning Program to Encourage and Persuade Learners

    Science.gov (United States)

    Chen, Gwo-Dong; Lee, Jih-Hsien; Wang, Chin-Yeh; Chao, Po-Yao; Li, Liang-Yi; Lee, Tzung-Yi

    2012-01-01

    Animated pedagogical agents with characteristics such as facial expressions, gestures, and human emotions, under an interactive user interface are attractive to students and have high potential to promote students' learning. This study proposes a convenient method to add an embodied empathic avatar into a computer-aided learning program; learners…

  9. Analysis and selection of data models when developing computer-aided design systems

    OpenAIRE

    Fisun, Mykola T.; Davydenko, Yevhen O.

    2014-01-01

    The features of description of the subject matters of computer-aided design systems by means of relational, object and multi-dimensional models of the control systems for data bases are studied. The illustrated example of description of elementary geometry shapes shows the advantages of the object data model using the method of hierarchy analysis.

  10. Computer-aided diagnosis with temporal analysis to improve radiologists' interpretation of mammographic mass lesions.

    NARCIS (Netherlands)

    Timp, S.; Varela, C.; Karssemeijer, N.

    2010-01-01

    The purpose of this study was to evaluate the effect of independent reading with computer-aided diagnosis (CAD) and independent double reading on radiologists' performance to characterize mass lesions on serial mammograms. Six radiologists rated 198 cases, 99 benign and 99 malignant. For each case,

  11. Impact of Computer-Aided Warfarin Dosing in a Saudi Arabian ...

    African Journals Online (AJOL)

    Purpose: To compare the efficacy of computer-aided dosing using Coagclinic (a web-based software) with physician dosing in patients receiving warfarin for various cardiac indications. Methods: In order to calculate the effectiveness of physician managed anticoagulation dosing, we calculated the “percentage of time ...

  12. Observer training for computer-aided detection of pulmonary nodules in chest radiography

    NARCIS (Netherlands)

    De Boo, D.W.; van Hoorn, F.; van Schuppen, J.; Schijf, L.; Scheerder, M.J.; Freling, N.J.; Mets, O.; Weber, M.; Schaefer-Prokop, C.M.

    2012-01-01

    To assess whether short-term feedback helps readers to increase their performance using computer-aided detection (CAD) for nodule detection in chest radiography.The 140 CXRs (56 with a solitary CT-proven nodules and 84 negative controls) were divided into four subsets of 35; each were read in a

  13. Comparative evaluation of support vector machine classification for computer aided detection of breast masses in mammography

    NARCIS (Netherlands)

    Lesniak, J.M.; Hupse, R.; Blanc, R.; Karssemeijer, N.; Sz\\'ekely, G.

    2012-01-01

    False positive (FP) marks represent an obstacle for effective use of computer-aided detection (CADe) of breast masses in mammography. Typically, the problem can be approached either by developing more discriminative features or by employing different classifier designs. In this paper, the usage of

  14. DEVELOPMENT AND USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOLS FOR POLLUTION PREVENTION

    Science.gov (United States)

    The use of Computer-Aided Process Engineering (CAPE) and process simulation tools has become established industry practice to predict simulation software, new opportunities are available for the creation of a wide range of ancillary tools that can be used from within multiple sim...

  15. USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOL IN POLLUTION PREVENTION

    Science.gov (United States)

    Computer-Aided Process Engineering has become established in industry as a design tool. With the establishment of the CAPE-OPEN software specifications for process simulation environments. CAPE-OPEN provides a set of "middleware" standards that enable software developers to acces...

  16. Computer aided molecular design with combined molecular modeling and group contribution

    DEFF Research Database (Denmark)

    Harper, Peter Mathias; Gani, Rafiqul; Kolar, Petr

    1999-01-01

    Computer-aided molecular design (CAMD) provides a means for determining molecules or mixtures of molecules (CAMMD) having a desirable set of physicochemical properties. The application range of CAMD is restricted due to limitations on the complexity of the generated molecular structures and on th...

  17. Computer Aided Design and Analysis of Separation Processes with Electrolyte Systems

    DEFF Research Database (Denmark)

    Takano, Kiyoteru; Gani, Rafiqul; Kolar, P.

    2000-01-01

    A methodology for computer aided design and analysis of separation processes involving electrolyte systems is presented. The methodology consists of three main parts. The thermodynamic part 'creates' the problem specific property model package, which is a collection of pure component and mixture ...

  18. When Summative Computer-Aided Assessments Go Wrong: Disaster Recovery after a Major Failure

    Science.gov (United States)

    Harwood, Ian

    2005-01-01

    This case study outlines the events of a recent summative computer-aided assessment (CAA) failure involving 280 first-year undergraduate students. Post-test analysis found that the central server had become unexpectedly overloaded, thereby causing the CAA to be abandoned. Practical advice on just what to do in the event of a summative CAA failure…

  19. Review of the Hungarian activity in the framework of the IAEA computer aided safety analysis

    International Nuclear Information System (INIS)

    Perneczky, L.; Szabados, L.; Toth, I.

    1988-01-01

    The Hungarian activities under the IAEA Programme on Computer Aided Safety Analysis for the period 1985-1987 are presented. They are principally related to the calculation of the first PMK-NVH Standard Problem Exercise, however some calculations related to analysis of Paks nuclear power plant are also discussed. (author). 11 refs, 1 fig., 1 tab

  20. Data Management Standards in Computer-aided Acquisition and Logistic Support (CALS)

    Science.gov (United States)

    Jefferson, David K.

    1990-01-01

    Viewgraphs and discussion on data management standards in computer-aided acquisition and logistic support (CALS) are presented. CALS is intended to reduce cost, increase quality, and improve timeliness of weapon system acquisition and support by greatly improving the flow of technical information. The phase 2 standards, industrial environment, are discussed. The information resource dictionary system (IRDS) is described.