WorldWideScience

Sample records for comprehensive accreditation manual

  1. Accredition: An accredited utility's perspective

    International Nuclear Information System (INIS)

    Jambrovic, H.

    1990-01-01

    Accredition is a quality assurance program that applies to electricity billing meters. Under the Electricity and Gas Inspection Act, an electricity meter is not a legal billing device until a prototype has been scrutinized and approved for use by Consumer and Corporate Affairs Canada (CCAC) laboratories, and a meter cannot be used for billing purposes unless its accuracy and condition have been inspected and the meter is sealed to prevent tampering. In 1986 an ammendment to the act allowed accredited organizations to inspect, verify and seal their own billing meters. Ontario Hydro embarked on a program to become accredited in 1987, to offset spiraling government inspection fees in the order of $500,000/y, and to be less dependent on the availability of government inspectors. Ontario Hydro achieved accredition status two years after embarking on the program, which involved completion of cost benefit analysis, securing senior management commitment, preparation of a comprehensive quality assurance program manual, implementation of quality assurance program policies, procedures and controls, submitting meter shop operations and field meter handling practices to both internal Ontario Hydro and external government audit, and correction of audit findings. 2 figs

  2. Radiopharmaceuticals and hospital radiopharmacy practices: course manual for accreditation/certification of hospital radiopharmacists

    International Nuclear Information System (INIS)

    Ramamoorthy, N.; Shivarudrappa, V.; Bhelose, Amita A.

    2000-02-01

    This manual on hospital radiopharmaceuticals and hospital radiopharmacy practices contains information and recommendations that could be of use to hospital radiopharmacists while the main focus of the book is to impart adequate exposure to basics of radiopharmaceuticals and purity and safety aspects of formulations to be made in hospital radiopharmacy. Papers relevant to INIS are indexed separately

  3. The design process of a reading comprehension manual

    Directory of Open Access Journals (Sweden)

    Sergio Alonso Lopera Medina

    2015-05-01

    Full Text Available Material design is an important part in the teaching practices. This article describes the process of material design of a foreign language (FL reading manual for undergraduate students at Universidad de Antioquia (Medellín – Colombia. A case study was used as a research method. Four in-service English teachers based their inquiry following the reflective approach of professional development. They also took into account the guidelines to design teaching materials proposed by Howard and Major (2004.  Some of the results of their inquiry for the design of the manual involve contextualization, personalization, and students’ needs. A sample of a reading strategy is given in order to illustrate how teachers worked and designed the manual as a product of their inquiry. Conclusions suggest that this professional development practice helped teachers become more aware of their own teaching realities and also helped them to understand their beliefs and practice in teaching reading as a foreign language.

  4. Developing and implementing an accreditation system for health promoting schools in Northern India: a cross-sectional study.

    Science.gov (United States)

    Thakur, Jarnail Singh; Sharma, Deepak; Jaswal, Nidhi; Bharti, Bhavneet; Grover, Ashoo; Thind, Paramjyoti

    2014-12-22

    The "Health Promoting School" (HPS) is a holistic and comprehensive approach to integrating health promotion within the community. At the time of conducting this study, there was no organized accreditation system for HPS in India. We therefore developed an accreditation system for HPSs using support from key stakeholders and implemented this system in HPS in Chandigarh territory, India. A desk review was undertaken to review HPS accreditation processes used in other countries. An HPS accreditation manual was drafted after discussions with key stakeholders. Seventeen schools (eight government and nine private) were included in the study. A workshop was held with school principals and teachers and other key stakeholders, during which parameters, domains and an accreditation checklist were discussed and finalized. The process of accreditation of these 17 schools was initiated in 2011 according to the accreditation manual. HPSs were encouraged to undertake activities to increase their accreditation grade and were reassessed in 2013 to monitor progress. Each school was graded on the basis of the accreditation scores obtained. The accreditation manual featured an accreditation checklist, with parameters, scores and domains. It categorized accreditation into four levels: bronze, silver, gold and platinum (each level having its own specific criteria and mandate). In 2011, more than half (52.9%) of the schools belonged to the bronze level and only 23.5% were at the gold level. Improvements were observed upon reassessment after 2 years (2013), with 76.4% of schools at the gold level and only 11.8% at bronze. The HPS accreditation system is feasible in school settings and was well implemented in the schools of Chandigarh. Improvements in accreditation scores between 2011 and 2013 suggest that the system may be effective in increasing levels of health promotion in communities.

  5. University Accreditation using Data Warehouse

    Science.gov (United States)

    Sinaga, A. S.; Girsang, A. S.

    2017-01-01

    The accreditation aims assuring the quality the quality of the institution education. The institution needs the comprehensive documents for giving the information accurately before reviewed by assessor. Therefore, academic documents should be stored effectively to ease fulfilling the requirement of accreditation. However, the data are generally derived from various sources, various types, not structured and dispersed. This paper proposes designing a data warehouse to integrate all various data to prepare a good academic document for accreditation in a university. The data warehouse is built using nine steps that was introduced by Kimball. This method is applied to produce a data warehouse based on the accreditation assessment focusing in academic part. The data warehouse shows that it can analyse the data to prepare the accreditation assessment documents.

  6. IADC's well control accreditation program

    International Nuclear Information System (INIS)

    Kropla, S.M.

    1997-01-01

    WellCAP is a well control accreditation program devised and implemented by the International Association of Drilling Contractors (IADC). It is a worldwide comprehensive system that defines a well control training curriculum, establishes minimum standards and recommends guidelines for course structure. The program began in mid-1993 and is viewed as a means for training institutions to demonstrate industry recognition to customers, contractors and local governments. Schools can apply to have their courses accredited. The accreditation system is administered by a review panel. The application process requires that the school perform a detailed review of its curriculum and operations and bring them in line with the WellCAP curriculum and accreditation criteria. Currently, more than 75 schools around the world have requested application materials for WellCAP. To date fifteen schools have been fully accredited

  7. A journey to accreditation: is ISO 15189 laboratory accreditation ...

    African Journals Online (AJOL)

    Through this journey we comprehend that the first step before accreditation is building enthusiastic team with education on quality management system. Other steps include selection of methods, developing or improving the metrology system, definition and structure of documents, preparation of a quality manual, SOPs, ...

  8. Law-Based Degree Programs in Business and Their Departments: What's in a Name? (A Comprehensive Study of Undergraduate Law-Based Degrees in AACSB-Accredited Universities)

    Science.gov (United States)

    Miller, Carol J.; Crain, Susan J.

    2007-01-01

    This study examines undergraduate law-based degree programs in the 404 U.S. universities with undergraduate degrees in business that had Association to Advance Collegiate Schools of Business (AACSB) accreditation in 2005. University Web sites were used to identify and compare law-based undergraduate programs inside business to law-related programs…

  9. What Should Gerontology Learn from Health Education Accreditation?

    Science.gov (United States)

    Bradley, Dana Burr; Fitzgerald, Kelly

    2012-01-01

    Quality assurance and accreditation are closely tied together. This article documents the work toward a unified and comprehensive national accreditation program in health education. By exploring the accreditation journey of another discipline, the field of gerontology should learn valuable lessons. These include an attention to inclusivity, a…

  10. Accredited Birth Centers

    Science.gov (United States)

    ... Danbury, CT 06810 203-748-6000 Accredited Since March 1998 Corvallis Birth & Women's Health Center Accredited 2314 NW Kings Blvd, Suite ... Washington, DC 20002 202-398-5520 Accredited Since March 2001 Flagstaff Birth and Women's Center Accredited 401 West Aspen Avenue Flagstaff, AZ ...

  11. The MycoBrowser portal: a comprehensive and manually annotated resource for mycobacterial genomes.

    Science.gov (United States)

    Kapopoulou, Adamandia; Lew, Jocelyne M; Cole, Stewart T

    2011-01-01

    In this paper, we present the MycoBrowser portal (http://mycobrowser.epfl.ch/), a resource that provides both in silico generated and manually reviewed information within databases dedicated to the complete genomes of Mycobacterium tuberculosis, Mycobacterium leprae, Mycobacterium marinum and Mycobacterium smegmatis. A central component of MycoBrowser is TubercuList (http://tuberculist.epfl.ch), which has recently benefited from a new data management system and web interface. These improvements were extended to all MycoBrowser databases. We provide an overview of the functionalities available and the different ways of interrogating the data then discuss how both the new information and the latest features are helping the mycobacterial research communities. Copyright © 2010 Elsevier Ltd. All rights reserved.

  12. Comprehensive Early Stimulation Program for Infants. Instruction Manual [and] Early Interventionist's Workbook [and] Parent/Caregiver Workbook. William Beaumont Hospital Speech and Language Pathology Series.

    Science.gov (United States)

    Santana, Altagracia A.; Bottino, Patti M.

    This early intervention kit includes a Comprehensive Early Stimulation Program for Infants (CESPI) instruction manual, an early interventionist workbook, and ten parent/caregiver workbooks. The CESPI early intervention program is designed to provide therapists, teachers, other health professionals, and parents with a common-sense, practical guide…

  13. Laboratory accreditation in developing economies

    International Nuclear Information System (INIS)

    Loesener, O.

    2004-01-01

    Full text: Accreditation of laboratories has been practiced for well over one hundred years with the primary objective of seeking a formal recognition for the competence of a laboratory to perform specified tests or measurements. While first accreditation schemes intended initially to serve only the immediate needs of the body making the evaluation with the purpose of minimizing testing and inspection to be conducted by laboratories, third-party accreditation enables a laboratory to demonstrate its capability as well as availability of all necessary resources to undertake particular tests correctly and that is managed in such a way that it is likely to do this consistently, taking into consideration standards developed by national and international standards-setting bodies. The international standard ISO/IEC 17025 and laboratory accreditation are concerned with competence and quality management of laboratories only, thus requiring a single common set of criteria applicable to them. Quality assurance is therefore fully relevant to laboratories in general and analytical laboratories in particular; it should not be confused with the certification approach according to ISO/IEC 9000 family of standards, that is concerned with quality management applicable to any organization as a whole. The role of laboratory accreditation can be manifold, but in all cases the recipient of the test report needs to have confidence that the data in it is reliable, particularly if the test data is important in a decision-making process. As such, it offers a comprehensive way to ensure: - the availability of managerial and technical staff with the authority and resources needed; - the effectiveness of equipment management, traceability of measurement and safety procedures; - the performance of tests, taking into consideration laboratory accommodation and facilities as well as laboratory practices. The presentation will include also some practical aspects of quality management system

  14. Mozambique's journey toward accreditation of the National Tuberculosis Reference Laboratory.

    Science.gov (United States)

    Viegas, Sofia O; Azam, Khalide; Madeira, Carla; Aguiar, Carmen; Dolores, Carolina; Mandlaze, Ana P; Chongo, Patrina; Masamha, Jessina; Cirillo, Daniela M; Jani, Ilesh V; Gudo, Eduardo S

    2017-01-01

    Internationally-accredited laboratories are recognised for their superior test reliability, operational performance, quality management and competence. In a bid to meet international quality standards, the Mozambique National Institute of Health enrolled the National Tuberculosis Reference Laboratory (NTRL) in a continuous quality improvement process towards ISO 15189 accreditation. Here, we describe the road map taken by the NTRL to achieve international accreditation. The NTRL adopted the Strengthening Laboratory Management Toward Accreditation (SLMTA) programme as a strategy to implement a quality management system. After SLMTA, the Mozambique National Institute of Health committed to accelerate the NTRL's process toward accreditation. An action plan was designed to streamline the process. Quality indicators were defined to benchmark progress. Staff were trained to improve performance. Mentorship from an experienced assessor was provided. Fulfilment of accreditation standards was assessed by the Portuguese Accreditation Board. Of the eight laboratories participating in SLMTA, the NTRL was the best-performing laboratory, achieving a 53.6% improvement over the SLMTA baseline conducted in February 2011 to the Stepwise Laboratory Quality Improvement Process Towards Accreditation (SLIPTA) assessment in June 2013. During the accreditation assessment in September 2014, 25 minor nonconformities were identified and addressed. In March 2015, the NTRL received Portuguese Accreditation Board recognition of technical competency for fluorescence smear microscopy, and solid and liquid culture. The NTRL is the first laboratory in Mozambique to achieve ISO 15189 accreditation. From our experience, accreditation was made possible by institutional commitment, strong laboratory leadership, staff motivation, adequate infrastructure and a comprehensive action plan.

  15. Architecture Studio Archive: A Case Study in the Comprehensive Digital Capture and Repository of Student Design Work as an Aid to Teaching, Research, and Accreditation

    Science.gov (United States)

    Anderson, Ross; Arndell, Michael; Christensen, Sten

    2009-01-01

    The "Architecture Studio Archive" pilot sought to form a comprehensive digital archive of the diverse student work conducted in the first year of the Bachelor of Design in Architecture Degree at the University of Sydney. The design studio is the primary vehicle for teaching architectural design. It is a locus for creative activity, with…

  16. Components of laboratory accreditation.

    Science.gov (United States)

    Royal, P D

    1995-12-01

    Accreditation or certification is a recognition given to an operation or product that has been evaluated against a standard; be it regulatory or voluntary. The purpose of accreditation is to provide the consumer with a level of confidence in the quality of operation (process) and the product of an organization. Environmental Protection Agency/OCM has proposed the development of an accreditation program under National Environmental Laboratory Accreditation Program for Good Laboratory Practice (GLP) laboratories as a supplement to the current program. This proposal was the result of the Inspector General Office reports that identified weaknesses in the current operation. Several accreditation programs can be evaluated and common components identified when proposing a structure for accrediting a GLP system. An understanding of these components is useful in building that structure. Internationally accepted accreditation programs provide a template for building a U.S. GLP accreditation program. This presentation will discuss the traditional structure of accreditation as presented in the Organization of Economic Cooperative Development/GLP program, ISO-9000 Accreditation and ISO/IEC Guide 25 Standard, and the Canadian Association for Environmental Analytical Laboratories, which has a biological component. Most accreditation programs are managed by a recognized third party, either privately or with government oversight. Common components often include a formal review of required credentials to evaluate organizational structure, a site visit to evaluate the facility, and a performance evaluation to assess technical competence. Laboratory performance is measured against written standards and scored. A formal report is then sent to the laboratory indicating accreditation status. Usually, there is a scheduled reevaluation built into the program. Fee structures vary considerably and will need to be examined closely when building a GLP program.

  17. Training Accreditation Program

    International Nuclear Information System (INIS)

    1989-01-01

    The Training Accreditation Program establishes the objectives and criteria against which DOE nuclear facility training is evaluated to determine its readiness for accreditation. Training programs are evaluated against the accreditation objectives and criteria by facility personnel during the initial self-evaluation process. From this self-evaluation, action plans are made by the contractor to address the scope of work necessary in order to upgrade any deficiencies noted. This scope of work must be formally documented in the Training Program Accreditation Plan. When reviewed and approved by the responsible Head of the Field Organization and cognizant Program Secretarial Office, EH-1 concurrence is obtained. This plan then becomes the document which guides accreditation efforts for the contractor

  18. [Accreditation of forensic laboratories].

    Science.gov (United States)

    Sołtyszewski, Ireneusz

    2010-01-01

    According to the framework decision of the European Union Council, genetic laboratories which perform tests for the benefit of the law enforcement agencies and the administration of justice are required to obtain a certificate of accreditation testifying to compliance with the PN EN ISO/IEC 17025:2005 standard. The certificate is the official confirmation of the competence to perform research, an acknowledgement of credibility, impartiality and professional independence. It is also the proof of establishment, implementation and maintenance of an appropriate management system. The article presents the legal basis for accreditation, the procedure of obtaining the certificate of accreditation and selected elements of the management system.

  19. List of Accredited Attorneys

    Data.gov (United States)

    Department of Veterans Affairs — VA accreditation is for the sole purpose of providing representation services to claimants before VA and does not imply that a representative is qualified to provide...

  20. Tales of Accreditation Woe.

    Science.gov (United States)

    Dickmeyer, Nathan

    2002-01-01

    Offers cautionary tales depicting how an "Enron mentality" infiltrated three universities and jeopardized their accreditation status. The schools were guilty, respectively, of bad bookkeeping, lack of strategy and stable leadership, and loss of academic integrity by selling degrees. (EV)

  1. List of Accredited Organizations

    Data.gov (United States)

    Department of Veterans Affairs — VA accreditation is for the sole purpose of providing representation services to claimants before VA and does not imply that a representative is qualified to provide...

  2. List of Accredited Representatives

    Data.gov (United States)

    Department of Veterans Affairs — VA accreditation is for the sole purpose of providing representation services to claimants before VA and does not imply that a representative is qualified to provide...

  3. Accreditation of nuclear engineering programs

    International Nuclear Information System (INIS)

    Williamson, T.G.

    1989-01-01

    The American Nuclear Society (ANS) Professional Development and Accreditation Committee (PDAC) has the responsibility for accreditation of engineering and technology programs for nuclear and similarly named programs. This committee provides society liaison with the Accreditation Board for Engineering and Technology (ABET), is responsible for the appointment and training of accreditation visitors, nomination of members for the ABET Board and Accreditation Commissions, and review of the criteria for accreditation of nuclear-related programs. The committee is composed of 21 members representing academia and industry. The ABET consists of 19 participating bodies, primarily professional societies, and 4 affiliate bodies. Representation on ABET is determined by the size of the professional society and the number of programs accredited. The ANS, as a participating body, has one member on the ABET board, two members on the Engineering Accreditation Commission, and one on the Technology Accreditation Commission. The ABET board sets ABET policy and the commissions are responsible for accreditation visits

  4. [Accreditation of medical laboratories].

    Science.gov (United States)

    Horváth, Andrea Rita; Ring, Rózsa; Fehér, Miklós; Mikó, Tivadar

    2003-07-27

    In Hungary, the National Accreditation Body was established by government in 1995 as an independent, non-profit organization, and has exclusive rights to accredit, amongst others, medical laboratories. The National Accreditation Body has two Specialist Advisory Committees in the health care sector. One is the Health Care Specialist Advisory Committee that accredits certifying bodies, which deal with certification of hospitals. The other Specialist Advisory Committee for Medical Laboratories is directly involved in accrediting medical laboratory services of health care institutions. The Specialist Advisory Committee for Medical Laboratories is a multidisciplinary peer review group of experts from all disciplines of in vitro diagnostics, i.e. laboratory medicine, microbiology, histopathology and blood banking. At present, the only published International Standard applicable to laboratories is ISO/IEC 17025:1999. Work has been in progress on the official approval of the new ISO 15189 standard, specific to medical laboratories. Until the official approval of the International Standard ISO 15189, as accreditation standard, the Hungarian National Accreditation Body has decided to progress with accreditation by formulating explanatory notes to the ISO/IEC 17025:1999 document, using ISO/FDIS 15189:2000, the European EC4 criteria and CPA (UK) Ltd accreditation standards as guidelines. This harmonized guideline provides 'explanations' that facilitate the application of ISO/IEC 17025:1999 to medical laboratories, and can be used as a checklist for the verification of compliance during the onsite assessment of the laboratory. The harmonized guideline adapted the process model of ISO 9001:2000 to rearrange the main clauses of ISO/IEC 17025:1999. This rearrangement does not only make the guideline compliant with ISO 9001:2000 but also improves understanding for those working in medical laboratories, and facilitates the training and education of laboratory staff. With the

  5. From Evaluation to Accreditation

    DEFF Research Database (Denmark)

    Rasmussen, Palle

    Quality was introduced as political priority in Danish higher education during the 1980ties, associated with new public management as well as with new liberalism and conservatism. As a political goal the concept of quality has a paradoxical character because it does not lay out any definite course...... of education programmes has been introduced, also in the form of a national agency with the mission of accrediting all higher education programmes. The paper discusses reasons for and problems in this approach, and the more general social functions of quality assessment and accreditation....

  6. [Staff accreditation in parenteral nutrition production in hospital pharmacy].

    Science.gov (United States)

    Vrignaud, S; Le Pêcheur, V; Jouan, G; Valy, S; Clerc, M-A

    2016-09-01

    This work aims to provide staff accreditation methodology to harmonize and secure practices for parenteral nutrition bags preparation. The methodology used in the present study is inspired from project management and quality approach. Existing training supports were used to produce accreditation procedure and evaluation supports. We first defined abilities levels, from level 1, corresponding to accredited learning agent to level 3, corresponding to expert accredited agent. Elements assessed for accreditation are: clothing assessment either by practices audit or by microbiologic test, test bags preparation and handling assessment, bag production to assess aseptic filling for both manual or automatized method, practices audit, number of days of production, and non-conformity following. At Angers Hospital, in 2014, production staff is composed of 12 agents. Staff accreditation reveals that 2 agents achieve level 3, 8 agents achieve level 2 and 2 agents are level 1. We noted that non-conformity decreased as accreditation took place from 81 in 2009 to 0 in 2014. To date, there is no incident due to parenteral bag produced by Angers hospital for neonatal resuscitation children. Such a consistent study is essential to insure a secured nutrition parenteral production. This also provides a satisfying quality care for patients. Copyright © 2016 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

  7. Is Gerontology Ready for Accreditation?

    Science.gov (United States)

    Haley, William E.; Ferraro, Kenneth F.; Montgomery, Rhonda J. V.

    2012-01-01

    The authors review widely accepted criteria for program accreditation and compare gerontology with well-established accredited fields including clinical psychology and social work. At present gerontology lacks many necessary elements for credible professional accreditation, including defined scope of practice, applied curriculum, faculty with…

  8. Valuing the Accreditation Process

    Science.gov (United States)

    Bahr, Maria

    2018-01-01

    The value of the National Association for Developmental Education (NADE) accreditation process is far-reaching. Not only do students and programs benefit from the process, but also the entire institution. Through data collection of student performance, analysis, and resulting action plans, faculty and administrators can work cohesively towards…

  9. Quality assurance and accreditation.

    Science.gov (United States)

    1997-01-01

    In 1996, the Joint Commission International (JCI), which is a partnership between the Joint Commission on Accreditation of Healthcare Organizations and Quality Healthcare Resources, Inc., became one of the contractors of the Quality Assurance Project (QAP). JCI recognizes the link between accreditation and quality, and uses a collaborative approach to help a country develop national quality standards that will improve patient care, satisfy patient-centered objectives, and serve the interest of all affected parties. The implementation of good standards provides support for the good performance of professionals, introduces new ideas for improvement, enhances the quality of patient care, reduces costs, increases efficiency, strengthens public confidence, improves management, and enhances the involvement of the medical staff. Such good standards are objective and measurable; achievable with current resources; adaptable to different institutions and cultures; and demonstrate autonomy, flexibility, and creativity. The QAP offers the opportunity to approach accreditation through research efforts, training programs, and regulatory processes. QAP work in the area of accreditation has been targeted for Zambia, where the goal is to provide equal access to cost-effective, quality health care; Jordan, where a consensus process for the development of standards, guidelines, and policies has been initiated; and Ecuador, where JCI has been asked to help plan an approach to the evaluation and monitoring of the health care delivery system.

  10. Accreditation of Employee Development.

    Science.gov (United States)

    Geale, John

    A British project was conducted to improve understanding of the advantages and disadvantages of certification for work-based training and to analyze factors that influence the demand for accreditation. Three studies investigated what was happening in three employment sectors: tourism (service/commercial), social services (public administration),…

  11. Biosafety Manual

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  12. States Moving from Accreditation to Accountability. Accreditation: State School Accreditation Policies

    Science.gov (United States)

    Wixom, Micah Ann

    2014-01-01

    Accreditation policies vary widely among the states. Since Education Commission of the States last reviewed public school accreditation policies in 1998, a number of states have seen their legislatures take a stronger role in accountability--resulting in a move from state-administered accreditation systems to outcomes-focused state accountability…

  13. Peace Corps Aquaculture Training Manual. Training Manual T0057.

    Science.gov (United States)

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

  14. Is gerontology ready for accreditation?

    Science.gov (United States)

    Haley, William E; Ferraro, Kenneth F; Montgomery, Rhonda J V

    2012-01-01

    The authors review widely accepted criteria for program accreditation and compare gerontology with well-established accredited fields including clinical psychology and social work. At present gerontology lacks many necessary elements for credible professional accreditation, including defined scope of practice, applied curriculum, faculty with applied professional credentials, and resources necessary to support professional credentialing review. Accreditation with weak requirements will be dismissed as "vanity" accreditation, and strict requirements will be impossible for many resource-poor programs to achieve, putting unaccredited programs at increased risk for elimination. Accreditation may be appropriate in the future, but it should be limited to professional or applied gerontology, perhaps for programs conferring bachelor's or master's degrees. Options other than accreditation to enhance professional skills and employability of gerontology graduates are discussed.

  15. Accreditation: The US framework for colleges and professional disciplines

    International Nuclear Information System (INIS)

    Reyes-Guerra, D.R.

    1989-01-01

    Accreditation is a system of verified quality control and recognition. When applied to education it becomes the instrument by which the quality of education is measure. For engineering, the recognized accrediting agency is the Accreditation board for Engineering and Technology (ABET). The American Nuclear Society (ANS) provides input to ABET and to the profession regarding the special educational needs of nuclear engineering or nuclear engineering technology and related fields. The accreditation process involves the determination of criteria applicable to the educational experience that will satisfy the profession and the individual discipline; the application, with judgment, of the criteria to an individual program; the visit to that program by an evaluation team; and the judgment of the program against the criteria. The accreditation process requires a comprehensive self-study of the specific program being evaluated. Results are verified on-site by the evaluation team. Programs are accredited for a limited time span: 6 yr at the maximum. Programs are reevaluated as necessary for continued accreditation

  16. Mammography accreditation program

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, P.

    1993-12-31

    In the mid-1980`s, the movement toward the use of dedicated mammography equipment provided significant improvement in breast cancer detection. However, several studies demonstrated that this change was not sufficient to ensure optimal image quality at a low radiation dose. In particular, the 1985 Nationwide Evaluation of X-ray Trends identified the wide variations in image quality and radiation dose, even from dedicated units. During this time period, the American Cancer Society (ACS) launched its Breast Cancer Awareness Screening Campaign. However, there were concerns about the ability of radiology to respond to the increased demand for optimal screening examinations that would result from the ACS program. To respond to these concerns, the ACS and the American College of Radiology (ACR) established a joint committee on mammography screening in 1986. After much discussion, it was decided to use the ACR Diagnostic Practice Accreditation Program as a model for the development of a mammography accreditation program. However, some constraints were required in order to make the program meet the needs of the ACS. This voluntary, peer review program had to be timely and cost effective. It was determined that the best way to address these needs would be to conduct the program by mail. Finally, by placing emphasis on the educational nature of the program, it would provide an even greater opportunity for improving mammographic quality. The result of this effort was that, almost six years ago, in May 1987, the pilot study for the ACR Mammography Accreditation Program (MAP) began, and in August of that year, the first applications were received. In November 1987, the first 3-year accreditation certificates were awarded.

  17. Mammography accreditation program

    International Nuclear Information System (INIS)

    Wilcox, P.

    1993-01-01

    In the mid-1980's, the movement toward the use of dedicated mammography equipment provided significant improvement in breast cancer detection. However, several studies demonstrated that this change was not sufficient to ensure optimal image quality at a low radiation dose. In particular, the 1985 Nationwide Evaluation of X-ray Trends identified the wide variations in image quality and radiation dose, even from dedicated units. During this time period, the American Cancer Society (ACS) launched its Breast Cancer Awareness Screening Campaign. However, there were concerns about the ability of radiology to respond to the increased demand for optimal screening examinations that would result from the ACS program. To respond to these concerns, the ACS and the American College of Radiology (ACR) established a joint committee on mammography screening in 1986. After much discussion, it was decided to use the ACR Diagnostic Practice Accreditation Program as a model for the development of a mammography accreditation program. However, some constraints were required in order to make the program meet the needs of the ACS. This voluntary, peer review program had to be timely and cost effective. It was determined that the best way to address these needs would be to conduct the program by mail. Finally, by placing emphasis on the educational nature of the program, it would provide an even greater opportunity for improving mammographic quality. The result of this effort was that, almost six years ago, in May 1987, the pilot study for the ACR Mammography Accreditation Program (MAP) began, and in August of that year, the first applications were received. In November 1987, the first 3-year accreditation certificates were awarded

  18. Accreditation and Participatory Design

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Scheuer, John Damm

    2016-01-01

    This paper presents a soft project management paradigm approach based on participatory design to assuring values and benefits in public projects. For more than a decade, quality development in the Danish healthcare sector has been managed with an accreditation system known as the Danish Quality......-driven IT development and suggest how this approach may form a cornerstone of project management in a new quality-assurance program for the Danish healthcare sector....

  19. Oregon School Bond Manual. Fourth Edition.

    Science.gov (United States)

    Oregon State Dept. of Education, Salem.

    The manual is intended to guide attorneys and officials of school districts in the issuance and sale of school district bonds. Purchasers of school district bonds rely on the recommendations of accredited bond attorneys who render opinions concerning the validity and legality of bond issues offered for sale. This manual is designed to assist in…

  20. Clinical laboratory accreditation in India.

    Science.gov (United States)

    Handoo, Anil; Sood, Swaroop Krishan

    2012-06-01

    Test results from clinical laboratories must ensure accuracy, as these are crucial in several areas of health care. It is necessary that the laboratory implements quality assurance to achieve this goal. The implementation of quality should be audited by independent bodies,referred to as accreditation bodies. Accreditation is a third-party attestation by an authoritative body, which certifies that the applicant laboratory meets quality requirements of accreditation body and has demonstrated its competence to carry out specific tasks. Although in most of the countries,accreditation is mandatory, in India it is voluntary. The quality requirements are described in standards developed by many accreditation organizations. The internationally acceptable standard for clinical laboratories is ISO15189, which is based on ISO/IEC standard 17025. The accreditation body in India is the National Accreditation Board for Testing and Calibration Laboratories, which has signed Mutual Recognition Agreement with the regional cooperation the Asia Pacific Laboratory Accreditation Cooperation and with the apex cooperation the International Laboratory Accreditation Cooperation.

  1. How does Accreditation Influence the Dynamics of Organizational Identity for Business Schools?

    DEFF Research Database (Denmark)

    Lejeune, Christophe; Schultz, Majken; Vas, Alain

    2015-01-01

    approach offer a comprehensive theoretical framework. Second, we illustrate it with a European Management School’s accreditation failure and its management of change related to the accreditation goal. We elaborate and discuss a model titled “Identity Change through Accreditation” (ICA). Finally, we suggest...

  2. 76 FR 52548 - National Veterinary Accreditation Program; Currently Accredited Veterinarians Performing...

    Science.gov (United States)

    2011-08-23

    .... APHIS-2006-0093] RIN 0579-AC04 National Veterinary Accreditation Program; Currently Accredited... accredited in the National Veterinary Accreditation Program (NVAP) may continue to perform accredited duties..., 2011. FOR FURTHER INFORMATION CONTACT: Dr. Todd Behre, National Veterinary Accreditation Program, VS...

  3. Towards accreditation of MINT pesticide residue laboratory - a journey

    International Nuclear Information System (INIS)

    Nashriyah Mat; Salmah Moosa; Misman Sumin; Maizatul Akmam Mohd Nasir; Norimah Yusof

    2005-01-01

    The laboratory accreditation process under ISO/IEC 17025 is a complex journey, due to several compulsory inputs necessary for obtaining the accreditation. This paper dwells on most of those inputs in the context of MINT Pesticide Residue Laboratory (MPRL), including: 1) Quality work culture; 2) Management commitment; 3) Sustainability of laboratory service appointment; 4) Laboratory personnel; 5) Laboratory equipment; 6) Continual training of personnel; 7) Technical co-operation; 8) Laboratory safety; 9) Special and general budget; 10) Consultancy service; 11) Quality Manual, Procedure, Work Instruction and related documents; 12) Internal Quality Audit (IQA) by MINT Quality Unit, and 13) Teamwork spirit. Based on experience faced and knowledge gained, multiple problems arising during this journey towards MINT Pesticide Residue Laboratory accreditation are also discussed in general, including their solutions. (Author)

  4. Accreditation: a cultural control strategy.

    Science.gov (United States)

    Paccioni, André; Sicotte, Claude; Champagne, François

    2008-01-01

    The purpose of this paper is to describe and understand the effects of the accreditation process on organizational control and quality management practices in two Quebec primary-care health organizations. A multiple-case longitudinal study was conducted taking a mixed qualitative/quantitative approach. An analytical model was developed of the effects of the accreditation process on the type of organizational control exercised and the quality management practices implemented. The data were collected through group interviews, semi-directed interviews of key informers, non-participant observations, a review of the literature, and structured questionnaires distributed to all the employees working in both institutions. The accreditation process has fostered the implementation of consultation mechanisms in self-assessment teams. Improving assessments of client satisfaction was identified as a prime objective but, in terms of the values promoted in organizations, accreditation has little effect on the perceptions of employees not directly involved in the process. As long as not all staff members have integrated the basis for accreditation and its outcomes, the accreditation process appears to remain an external, bureaucratic control instrument. This study provides a theoretical model for understanding organizational changes brought about by accreditation of primary services. Through self-assessment of professional values and standards, accreditation may foster better quality management practices.

  5. Aligning Assessments for COSMA Accreditation

    Science.gov (United States)

    Laird, Curt; Johnson, Dennis A.; Alderman, Heather

    2015-01-01

    Many higher education sport management programs are currently in the process of seeking accreditation from the Commission on Sport Management Accreditation (COSMA). This article provides a best-practice method for aligning student learning outcomes with a sport management program's mission and goals. Formative and summative assessment procedures…

  6. Accreditation of human research protection program: An Indian perspective

    Directory of Open Access Journals (Sweden)

    K L Bairy

    2012-01-01

    Full Text Available With the increasing number of clinical trials being placed in India, it is the collective responsibility of the Investigator sites, Government, Ethics Committees, and Sponsors to ensure that the trial subjects are protected from risks these studies can have, that subjects are duly compensated, and credible data generated. Most importantly, each institution/hospital should have a strong Human Research Protection Program to safe guard the trial subjects. In order to look at research with a comprehensive objective approach, there is a need for a formal auditing and review system by a recognized body. As of now, only the sponsors are monitoring/auditing their respective trials; however, there is an increasing need to perform a more detailed review and assessment of processes of the institution and the Ethics Committee. This challenge can be addressed by going for accreditation by a reputed association that encompasses-the institutions, the ethics committees, and researcher/research staff. Starting their journey for the accreditation process in late 2010, Kasturba Medical College and Hospital [KMC], Manipal, and Manipal Hospital Bangalore [MHB] received full Association for the Accreditation of Human Research Protection Programs (AAHRPP accreditation in Dec 2011-a first in India. This article delves into the steps involved in applying for AAHRPP accreditation from an Indian Perspective, the challenges, advantages, and testimonials from the two hospitals on the application experience and how the accreditation has improved the Human Research Protection Program at these hospitals.

  7. Commission for the Accreditation of Birth Centers

    Science.gov (United States)

    ... Learning Login: Commissioners Birth Centers CABC Learning Place Home Accredited Birth Centers Find CABC Accredited Birth Centers What does ... In the Pursuit of Excellence You are here: Home In the ... for the Accreditation of Birth Centers (CABC) provides support, education, and accreditation to ...

  8. Standards of Quality: Accreditation Guidelines Redesigned

    Science.gov (United States)

    Forsythe, Hazel; Andrews, Frances; Stanley, M. Sue; Anderson, Carol L.

    2011-01-01

    To ensure optimal standards for AAFCS program accreditation, the Council for Accreditation (CFA) conducted a review and revision of the "2001 AAFCS Standards for Accreditation." The CFA took a three-pronged approach including (a) a review of academic accreditations that had relationships to the FCS disciplines, (b) concept, content, and process…

  9. 75 FR 59605 - National Veterinary Accreditation Program; Currently Accredited Veterinarians Performing...

    Science.gov (United States)

    2010-09-28

    .... APHIS-2006-0093] RIN 0579-AC04 National Veterinary Accreditation Program; Currently Accredited... Veterinary Accreditation Program (NVAP) may continue to perform accredited duties and to elect to continue to..., National Veterinary Accreditation Program, VS, APHIS, 4700 River Road Unit 200, Riverdale, MD 20737; (301...

  10. [Accreditation of Independent Ethics Committees].

    Science.gov (United States)

    Ramiro Avilés, Miguel A

    According to Law 14/2007 and Royal Decree 1090/2015, biomedical research must be assessed by an Research Ethics Committee (REC), which must be accredited as an Research ethics committee for clinical trials involving medicinal products (RECm) if the opinion is issued for a clinical trial involving medicinal products or clinical research with medical devices. The aim of this study is to ascertain how IEC and IECm accreditation is regulated. National and regional legislation governing biomedical research was analysed. No clearly-defined IEC or IECm accreditation procedures exist in the national or regional legislation. Independent Ethics Committees are vital for the development of basic or clinical biomedical research, and they must be accredited by an external body in order to safeguard their independence, multidisciplinary composition and review procedures. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  11. List of Accredited Claims Agents

    Data.gov (United States)

    Department of Veterans Affairs — VA accreditation is for the sole purpose of providing representation services to claimants before VA and does not imply that a representative is qualified to provide...

  12. Accreditation, the reward for quality

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    Arkansas Power and Light Co. (AP and L) includes safety along with efficiency in the ''bottom line'' of a quality training program designed to improve performance at its nuclear units. The program keeps operators aware of design and refueling as well as regulatory changes. The Institute of Nuclear Power Operations (INPO) accredited the utility's operator training program in 1984. The article cites examples of the training program, and gives an overview of the INPO team's analysis that led to accreditation

  13. Mozambique’s journey toward accreditation of the National Tuberculosis Reference Laboratory

    Directory of Open Access Journals (Sweden)

    Sofia O. Viegas

    2017-03-01

    Full Text Available Background: Internationally-accredited laboratories are recognised for their superior test reliability, operational performance, quality management and competence. In a bid to meet international quality standards, the Mozambique National Institute of Health enrolled the National Tuberculosis Reference Laboratory (NTRL in a continuous quality improvement process towards ISO 15189 accreditation. Here, we describe the road map taken by the NTRL to achieve international accreditation. Methods: The NTRL adopted the Strengthening Laboratory Management Toward Accreditation (SLMTA programme as a strategy to implement a quality management system. After SLMTA, the Mozambique National Institute of Health committed to accelerate the NTRL’s process toward accreditation. An action plan was designed to streamline the process. Quality indicators were defined to benchmark progress. Staff were trained to improve performance. Mentorship from an experienced assessor was provided. Fulfilment of accreditation standards was assessed by the Portuguese Accreditation Board. Results: Of the eight laboratories participating in SLMTA, the NTRL was the best-performing laboratory, achieving a 53.6% improvement over the SLMTA baseline conducted in February 2011 to the Stepwise Laboratory Quality Improvement Process Towards Accreditation (SLIPTA assessment in June 2013. During the accreditation assessment in September 2014, 25 minor nonconformities were identified and addressed. In March 2015, the NTRL received Portuguese Accreditation Board recognition of technical competency for fluorescence smear microscopy, and solid and liquid culture. The NTRL is the first laboratory in Mozambique toachieve ISO 15189 accreditation. Conclusions: From our experience, accreditation was made possible by institutional commitment, strong laboratory leadership, staff motivation, adequate infrastructure and a comprehensive action plan.

  14. Mozambique’s journey toward accreditation of the National Tuberculosis Reference Laboratory

    Science.gov (United States)

    Madeira, Carla; Aguiar, Carmen; Dolores, Carolina; Mandlaze, Ana P.; Chongo, Patrina; Masamha, Jessina

    2017-01-01

    Background Internationally-accredited laboratories are recognised for their superior test reliability, operational performance, quality management and competence. In a bid to meet international quality standards, the Mozambique National Institute of Health enrolled the National Tuberculosis Reference Laboratory (NTRL) in a continuous quality improvement process towards ISO 15189 accreditation. Here, we describe the road map taken by the NTRL to achieve international accreditation. Methods The NTRL adopted the Strengthening Laboratory Management Toward Accreditation (SLMTA) programme as a strategy to implement a quality management system. After SLMTA, the Mozambique National Institute of Health committed to accelerate the NTRL’s process toward accreditation. An action plan was designed to streamline the process. Quality indicators were defined to benchmark progress. Staff were trained to improve performance. Mentorship from an experienced assessor was provided. Fulfilment of accreditation standards was assessed by the Portuguese Accreditation Board. Results Of the eight laboratories participating in SLMTA, the NTRL was the best-performing laboratory, achieving a 53.6% improvement over the SLMTA baseline conducted in February 2011 to the Stepwise Laboratory Quality Improvement Process Towards Accreditation (SLIPTA) assessment in June 2013. During the accreditation assessment in September 2014, 25 minor nonconformities were identified and addressed. In March 2015, the NTRL received Portuguese Accreditation Board recognition of technical competency for fluorescence smear microscopy, and solid and liquid culture. The NTRL is the first laboratory in Mozambique to achieve ISO 15189 accreditation. Conclusions From our experience, accreditation was made possible by institutional commitment, strong laboratory leadership, staff motivation, adequate infrastructure and a comprehensive action plan. PMID:28879162

  15. Laboratory quality management system: Road to accreditation and beyond

    Directory of Open Access Journals (Sweden)

    V Wadhwa

    2012-01-01

    Full Text Available This review attempts to clarify the concepts of Laboratory Quality Management System (Lab QMS for a medical testing and diagnostic laboratory in a holistic way and hopes to expand the horizon beyond quality control (QC and quality assurance. It provides an insight on accreditation bodies and highlights a glimpse of existing laboratory practices but essentially it takes the reader through the journey of accreditation and during the course of reading and understanding this document, prepares the laboratory for the same. Some of the areas which have not been highlighted previously include: requirement for accreditation consultants, laboratory infrastructure and scope, applying for accreditation, document preparation. This section is well supported with practical illustrations and necessary tables and exhaustive details like preparation of a standard operating procedure and a quality manual. Concept of training and privileging of staff has been clarified and a few of the QC exercises have been dealt with in a novel way. Finally, a practical advice for facing an actual third party assessment and caution needed to prevent post-assessment pitfalls has been dealt with.

  16. The program director and accreditation

    International Nuclear Information System (INIS)

    Tristan, T.A.; Capp, M.P.; Krabbenhoft, K.L.; Armbruster, J.S.

    1987-01-01

    Field Survey is contrasted with the Specialist Site Visitor. The discussion addresses the reasons for different types of surveys and how the surveys and the Hospital Information Form are used in evaluating a graduate residency program in radiology for accreditation. The Residency Review Committee for Radiology (RRC) and the staff of the Accreditation Council for Graduate Medical Education (ACGME) of Residencies in Radiology offer a program for program directors and other interested leaders in graduate programs in radiology. The authors explain the review and accreditation process for residencies in radiology with special emphasis on the preparation for inspection by accurate and full completion of the Hospital Information Form on which the program is judged, and the nature of the inspection procedures

  17. Fire Protection Program Manual

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  18. 22 CFR 96.63 - Renewal of accreditation or approval.

    Science.gov (United States)

    2010-04-01

    ... for renewal in a timely fashion. Before deciding whether to renew the accreditation or approval of an... accrediting entity or the Secretary during its most current accreditation or approval cycle, the accrediting...

  19. Clinical Psychology Training: Accreditation and Beyond.

    Science.gov (United States)

    Levenson, Robert W

    2017-05-08

    Beginning with efforts in the late 1940s to ensure that clinical psychologists were adequately trained to meet the mental health needs of the veterans of World War II, the accreditation of clinical psychologists has largely been the province of the Commission on Accreditation of the American Psychological Association. However, in 2008 the Psychological Clinical Science Accreditation System began accrediting doctoral programs that adhere to the clinical science training model. This review discusses the goals of accreditation and the history of the accreditation of graduate programs in clinical psychology, and provides an overview of the evaluation procedures used by these two systems. Accreditation is viewed against the backdrop of the slow rate of progress in reducing the burden of mental illness and the changes in clinical psychology training that might help improve this situation. The review concludes with a set of five recommendations for improving accreditation.

  20. ORIGINAL ARTICLES Academic hospital accreditation strengthens ...

    African Journals Online (AJOL)

    This case study originated from the combined experiences of the accreditation process of a ... (iv) the benefits of hospital accreditation and quality management. The study ... Tertiary healthcare is in a crisis after nearly 3 decades of neglect,2,3.

  1. Accreditation and Educational Quality: Are Students in Accredited Programs More Academically Engaged?

    Science.gov (United States)

    Cole, James S.; Cole, Shu T.

    2008-01-01

    There has been a great deal of debate regarding the value of program accreditation. Two research questions guided this study: 1) are students enrolled in accredited parks, recreation, and leisure programs more academically engaged than students enrolled in non-accredited programs, and 2) do students enrolled in accredited parks, recreation, and…

  2. Quantitative Statements in Standards of Three Accrediting Bodies: APA, CACREP, and CSWE.

    Science.gov (United States)

    Peterson, Marla P.; Turner, Janet

    The accreditation manual of the Council for Accrediation of Counseling and Related Education Programs (CACREP) contains a statement that, whenever possible, criteria for assessing standards should be qualitative rather than quantitative. The study reported in this paper was conducted to gather baseline data on the extent to which accrediting…

  3. 7 CFR 205.506 - Granting accreditation.

    Science.gov (United States)

    2010-01-01

    ..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Accreditation of Certifying Agents § 205.506 Granting accreditation. (a... accreditation as provided in § 205.510(c), the certifying agent voluntarily ceases its certification activities...

  4. The Role of Accreditation in Consumer Protection.

    Science.gov (United States)

    Warner, W. Keith; Andersen, Kay J.

    1982-01-01

    Upper-level college administrators in the Western accreditation region were surveyed about how well the Western Association of Schools and Colleges (WASC) served its constituency. Questions concerned consumer protection as an objective of accreditation, emphasis on disseminating information about the accreditation process, and potential policy…

  5. Accreditation - ISO/IEC 17025

    Science.gov (United States)

    Kaus, Rüdiger

    This chapter gives the background on the accreditation of testing and calibration laboratories according to ISO/IEC 17025 and sets out the requirements of this international standard. ISO 15189 describes similar requirements especially tailored for medical laboratories. Because of these similarities ISO 15189 is not separately mentioned throughout this lecture.

  6. TAP 1, Training Program Manual

    International Nuclear Information System (INIS)

    1991-01-01

    Training programs at DOE nuclear facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs

  7. Changes in Local Public Health System Performance Before and After Attainment of National Accreditation Standards.

    Science.gov (United States)

    Ingram, Richard C; Mays, Glen P; Kussainov, Nurlan

    The aim of this study is to investigate the impact of Public Health Accreditation Board (PHAB) accreditation on the delivery of public health services and on participation from other sectors in the delivery of public health services in local public health systems. This study uses a longitudinal repeated measures design to identify differences between a cohort of public health systems containing PHAB-accredited local health departments and a cohort of public health systems containing unaccredited local health departments. It uses data spanning from 2006 to 2016. This study examines a cohort of local public health systems that serves large populations and contains unaccredited and PHAB-accredited local health departments. Data in this study were collected from the directors of health departments that include local public health systems followed in the National Longitudinal Study of Public Health Systems. The intervention examined is PHAB accreditation. The study focuses on 4 areas: the delivery of core public health services, local health department contribution toward these services, participation in the delivery of these services by other members of the public health system, and public health system makeup. Prior to the advent of accreditation, public health systems containing local health departments that were later accredited by PHAB appear quite similar to their unaccredited peers. Substantial differences between the 2 cohorts appear to manifest themselves after the advent of accreditation. Specifically, the accredited cohort seems to offer a broader array of public health services, involve more partners in the delivery of those services, and enjoy a higher percentage of comprehensive public health systems. The results of this study suggest that accreditation may yield significant benefits and may help public health systems develop the public health system capital necessary to protect and promote the public's health.

  8. Accreditation in general practice in Denmark

    DEFF Research Database (Denmark)

    Andersen, Merethe K; Pedersen, Line B; Siersma, Volkert

    2017-01-01

    Background: Accreditation is used increasingly in health systems worldwide. However, there is a lack of evidence on the effects of accreditation, particularly in general practice. In 2016 a mandatory accreditation scheme was initiated in Denmark, and during a 3-year period all practices, as default...... general practitioners in Denmark. Practices allocated to accreditation in 2016 serve as the intervention group, and practices allocated to accreditation in 2018 serve as controls. The selected outcomes should meet the following criteria: (1) a high degree of clinical relevance; (2) the possibility...... practice and mortality. All outcomes relate to quality indicators included in the Danish Healthcare Quality Program, which is based on general principles for accreditation. Discussion: The consequences of accreditation and standard-setting processes are generally under-researched, particularly in general...

  9. [ISO 15189 medical laboratory accreditation].

    Science.gov (United States)

    Aoyagi, Tsutomu

    2004-10-01

    This International Standard, based upon ISO/IEC 17025 and ISO 9001, provides requirements for competence and quality that are particular to medical laboratories. While this International Standard is intended for use throughout the currently recognized disciplines of medical laboratory services, those working in other services and disciplines will also find it useful and appropriate. In addition, bodies engaged in the recognition of the competence of medical laboratories will be able to use this International Standard as the basis for their activities. The Japan Accreditation Board for Conformity Assessment (AB) and the Japanese Committee for Clinical Laboratory Standards (CCLS) are jointly developing the program of accreditation of medical laboratories. ISO 15189 requirements consist of two parts, one is management requirements and the other is technical requirements. The former includes the requirements of all parts of ISO 9001, moreover it includes the requirement of conformity assessment body, for example, impartiality and independence from any other party. The latter includes the requirements of laboratory competence (e.g. personnel, facility, instrument, and examination methods), moreover it requires that laboratories shall participate proficiency testing(s) and laboratories' examination results shall have traceability of measurements and implement uncertainty of measurement. Implementation of ISO 15189 will result in a significant improvement in medical laboratories management system and their technical competence. The accreditation of medical laboratory will improve medical laboratory service and be useful for patients.

  10. Hospital accreditation: staff experiences and perceptions.

    Science.gov (United States)

    Bogh, Søren Bie; Blom, Ane; Raben, Ditte Caroline; Braithwaite, Jeffrey; Thude, Bettina; Hollnagel, Erik; Plessen, Christian von

    2018-06-11

    Purpose The purpose of this paper is to understand how staff at various levels perceive and understand hospital accreditation generally and in relation to quality improvement (QI) specifically. Design/methodology/approach In a newly accredited Danish hospital, the authors conducted semi-structured interviews to capture broad ranging experiences. Medical doctors, nurses, a quality coordinator and a quality department employee participated. Interviews were audio recorded and subjected to framework analysis. Findings Staff reported that The Danish Healthcare Quality Programme affected management priorities: office time and working on documentation, which reduced time with patients and on improvement activities. Organisational structures were improved during preparation for accreditation. Staff perceived that the hospital was better prepared for new QI initiatives after accreditation; staff found disease specific requirements unnecessary. Other areas benefited from accreditation. Interviewees expected that organisational changes, owing to accreditation, would be sustained and that the QI focus would continue. Practical implications Accreditation is a critical and complete hospital review, including areas that often are neglected. Accreditation dominates hospital agendas during preparation and surveyor visits, potentially reducing patient care and other QI initiatives. Improvements are less likely to occur in areas that other QI initiatives addressed. Yet, accreditation creates organisational foundations for future QI initiatives. Originality/value The authors study contributes new insights into how hospital staff at different organisational levels perceive and understand accreditation.

  11. Analysis of ISO/IEC 17025 for establishment of KOLAS (Korea Laboratory Accreditation Scheme) quality assurance system

    International Nuclear Information System (INIS)

    Nam, Ji Hee

    2000-12-01

    Besides one existent accredited lab, radioactive material chemical analysis lab, five test laboratories and two calibration labs are under plan to acquire the accreditation from KOLAS. But the current Quality Manual was developed according to ISO Guide 25 that was superceded by ISO/IEC 17025. Since it is tailored to the radioactive material chemical analysis lab, a number of requirements of the Manual are not applicable to the labs other than radioactive material chemical analysis lab. Through the analysis of ISO/IEC 17025, a model of quality system was established which is not only consistent with ISO/IEC 17025 but reflective of the KAERI's situation

  12. The experience of accreditation of the Reggio Emilia Research Hospital with the OECI model.

    Science.gov (United States)

    Mazzini, Elisa; Cerullo, Loredana; Mazzi, Giorgio; Costantini, Massimo

    2015-01-01

    The research hospital Istituto di Ricovero e Cura a Carattere Scientifico (IRCCS) of Reggio Emilia has a unique organization that involves a recently recognized IRCCS in oncology within a preexisting general hospital. The IRCCS of Reggio Emilia joined the "Tailored Accreditation Model for Comprehensive Cancer Centers: Validation through the Applicability of the Experimental OECI-based Model to the Network of Cancer IRCCS of the Alliance Against Cancer" and applied the accreditation & designation (A&D) Organisation of European Cancer Institutes (OECI) model in 2013. Before that accreditation, it had never been accredited according to international accreditation systems concerning cancer. By December 2015, the IRCCS of Reggio Emilia completed the first steps of the A&D OECI process (self-assessment period, peer review visit, implementation of the improvement plan). In December 2014, OECI confirmed the accreditation of our IRCCS and its designation as a Clinical Cancer Center and proposed a revisit at 2 years for upgrading the designation to Comprehensive Cancer Center (CCC). On the whole, the results given by adhesion to the A&D-OECI project are numerous and positive, under different points of view, formal (European accreditation and designation as a Clinical Cancer Center with possible upgrade to CCC) and substantial (involvement of professionals, attention to ongoing improvement, work on the sectors mainly of interest). The balance between the advantages and disadvantages linked to this accreditation model was positive. Following our experience, we conclude that the model was useful also for our kind of IRCCS, with its features useful for investigating all the sectors of the patient care pathway and research and necessity to stimulate change.

  13. Perry Johnson Laboratory Accreditation, Inc. (PJLA)

    Science.gov (United States)

    2011-03-28

    Accreditation Body, established in 1999, located in Troy, Michigan • Current Accreditation Programs– ISO / IEC 17025 :2005 and DoD ELAP, EPA NLLAP...Upcoming Accreditation Programs–Field Site Sampling & Measurement Organizations (FSMO)–TNI Volume 1 and 2, Reference Material Producers– ISO Guide...Testing/Calibration – 17025 -Testing–120 – 17025 -Calibration–191 – 17025 & DoD ELAP–14 (5 Pending) – 17025 and EPA NLLAP–1 – Pending

  14. Manual Therapy

    OpenAIRE

    Hakgüder, Aral; Kokino, Siranuş

    2002-01-01

    Manual therapy has been used in the treatment of pain and dysfunction of spinal and peripheral joints for more than a hundred years. Manual medicine includes manipulation, mobilization, and postisometric relaxation techniques. The aim of manual therapy is to enhance restricted movement caused by blockage of joints keeping postural balance, restore function and maintain optimal body mechanics. Anatomic, biomechanical, and neurophysiological evaluations of the leucomotor system is essential for...

  15. A Threat to Accreditation: Defamation Judgment against an Accreditation Team Member.

    Science.gov (United States)

    Flygare, Thomas J.

    1980-01-01

    Delaware Law School founder Alfred Avins successfully sued accreditation team member James White for defamation as a result of comments made in 1974 and 1975. An appeals brief claims Avins was a "public figure," that he consented to accreditation, and that the accreditation process deserves court protection against such suits. (PGD)

  16. Surviving Accreditation: A QIAS Ideas Bank. Accreditation and Beyond Series, Volume I.

    Science.gov (United States)

    Ferry, Jan

    This publication provides information on the accreditation process for early childhood education and care providers participating in the Quality Improvement and Accreditation System (QIAS), developed by the National Childcare Accreditation Council of Australia. The publication is divided into sections corresponding to steps in the…

  17. Accreditation to manage research programs

    International Nuclear Information System (INIS)

    Miramand, Pierre

    1993-01-01

    In this report for an accreditation to supervise research, the author proposes an overview of a study of transfers of vanadium towards benthic organisms (i.e. the toxicity of vanadium for sea coastal organisms), of studies of transfer of transuranic elements from sediment to marine benthic species. He presents current researches and perspectives: study of the level of metallic pollutants and physical-chemical characteristics of coastal waters in northern Cotentin, researches in Seine Bay, study of pollution biologic indicators. Numerous articles are provided in appendix

  18. Electromedical devices test laboratories accreditation

    International Nuclear Information System (INIS)

    Murad, C; Rubio, D; Ponce, S; Alvarez Abri, A; Terron, A; Vicencio, D; Fascioli, E

    2007-01-01

    In the last years, the technology and equipment at hospitals have been increase in a great way as the risks of their implementation. Safety in medical equipment must be considered an important issue to protect patients and their users. For this reason, test and calibrations laboratories must verify the correct performance of this kind of devices under national and international standards. Is an essential mission for laboratories to develop their measurement activities taking into account a quality management system. In this article, we intend to transmit our experience working to achieve an accredited Test Laboratories for medical devices in National technological University

  19. [Laboratory accreditation and proficiency testing].

    Science.gov (United States)

    Kuwa, Katsuhiko

    2003-05-01

    ISO/TC 212 covering clinical laboratory testing and in vitro diagnostic test systems will issue the international standard for medical laboratory quality and competence requirements, ISO 15189. This standard is based on the ISO/IEC 17025, general requirements for competence of testing and calibration laboratories and ISO 9001, quality management systems-requirements. Clinical laboratory services are essential to patient care and therefore should be available to meet the needs of all patients and clinical personnel responsible for human health care. If a laboratory seeks accreditation, it should select an accreditation body that operates according to this international standard and in a manner which takes into account the particular requirements of clinical laboratories. Proficiency testing should be available to evaluate the calibration laboratories and reference measurement laboratories in clinical medicine. Reference measurement procedures should be of precise and the analytical principle of measurement applied should ensure reliability. We should be prepared to establish a quality management system and proficiency testing in clinical laboratories.

  20. Consecutive cycles of hospital accreditation

    DEFF Research Database (Denmark)

    Falstie-Jensen, Anne Mette; Bogh, Søren Bie; Johnsen, Søren Paaske

    2018-01-01

    Objective: To examine the association between compliance with consecutive cycles of accreditation and patient-related outcomes. Design: A Danish nationwide population-based study from 2012 to 2015. Setting: In-patients admitted with one of the 80 diagnoses at public, non-psychiatric hospitals....... Participants: In-patients admitted with one of 80 primary diagnoses which accounted for 80% of all deaths occuring within 30 dyas after admission. Intervention: Admission to a hospital with high (n = 125 485 in-patients) or low compliance (n = 152 074 in-patients) in both cycles of accreditation by the Danish...... admission (adjusted OR: 1.26 (95% CI: 1.11-1.43) and a longer LOS (adjusted HR of discharge: 0.89 (95% CI: 0.82-0.95) than in-patients at high compliant hospitals. No difference was seen for acute readmission (adjusted HR: 0.98 (95% CI: 0.90-1.06)). Focusing on the second cycle alone, in...

  1. Library Standards: Evidence of Library Effectiveness and Accreditation.

    Science.gov (United States)

    Ebbinghouse, Carol

    1999-01-01

    Discusses accreditation standards for libraries based on experiences in an academic law library. Highlights include the accreditation process; the impact of distance education and remote technologies on accreditation; and a list of Internet sources of standards and information. (LRW)

  2. Structures manual

    Science.gov (United States)

    2001-01-01

    This manual was written as a guide for use by design personnel in the Vermont Agency of Transportation Structures Section. This manual covers the design responsibilities of the Section. It does not cover other functions that are a part of the Structu...

  3. Quality Manual

    Science.gov (United States)

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  4. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  5. Nuclear material operations manuals

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1979-06-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  6. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.; Gassman, L.D.

    1978-04-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations--management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of ''play-scripts'' in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  7. Practitioner Perceptions of Advertising Education Accreditation.

    Science.gov (United States)

    Vance, Donald

    According to a 1981 survey, advertising practitioners place more importance on the accreditation of college advertising programs when it comes to evaluating a graduate of such a program than do the educators who must earn the accreditation. Only directors of advertising education programs in the communication-journalism area that are currently…

  8. 42 CFR 414.68 - Imaging accreditation.

    Science.gov (United States)

    2010-10-01

    ... relates to the past year's accreditations and trends. (viii) Attest that the organization will not perform... past year's accreditation activities and trends. (h) Continuing Federal oversight of approved... to compel by subpoena the production of witnesses, papers, or other evidence. (v) Within 45 calendar...

  9. 38 CFR 21.4253 - Accredited courses.

    Science.gov (United States)

    2010-07-01

    ... teacher's certificate or teacher's degree. (5) The course is approved by the State as meeting the... which are certified as true and correct in content and policy by an authorized representative, and the... college or university is accredited by a nationally recognized regional accrediting agency listed by the...

  10. Accreditation Association for Ambulatory Health Care

    Science.gov (United States)

    ... learn more » Study Finds Compliance Concerns Remain with Safe Injection Practices (SIP) learn more » AAAHC Updates Standards Approach ... your newborn, or something in-between, you expect safe, high-quality care. The AAAHC certificate of accreditation ... seminar Application for accreditation survey Application for Medical Home On- ...

  11. [SWOT analysis of laboratory certification and accreditation on detection of parasitic diseases].

    Science.gov (United States)

    Xiong, Yan-hong; Zheng, Bin

    2014-04-01

    This study analyzes the strength, weakness, opportunity and threat (SWOT) of laboratory certification and accreditation on detection of parasitic diseases by SWOT analysis comprehensively, and it puts forward some development strategies specifically, in order to provide some indicative references for the further development.

  12. Accreditation - Its relevance for laboratories measuring radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Palsson, S E [Icelandic Radiation Protection Inst. (Iceland)

    2001-11-01

    Accreditation is an internationally recognised way for laboratories to demonstrate their competence. Obtaining and maintaining accreditation is, however, a costly and time-consuming procedure. The benefits of accreditation also depend on the role of the laboratory. Accreditation may be of limited relevance for a research laboratory, but essential for a laboratory associated with a national authority and e.g. issuing certificates. This report describes work done within the NKSBOK-1.1 sub-project on introducing accreditation to Nordic laboratories measuring radionuclides. Initially the focus was on the new standard ISO/IEC 17025, which was just in a draft form at the time, but which provides now a new framework for accreditation of laboratories. Later the focus was widened to include a general introduction to accreditation and providing through seminars a forum for exchanging views on the experience laboratories have had in this field. Copies of overheads from the last such seminar are included in the appendix to this report. (au)

  13. The operation and maintenance manual

    International Nuclear Information System (INIS)

    Stoll, A.; Krotil, H.; Klein, W.

    1976-01-01

    The operating manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the operating manual. The operating manual is an essential element in bringing man and machine in harmony. This is necessary for safe and, as far as possible, uninterrupted operation of the power plant. The operating manual is the only document containing binding instructions for plant operation. All the tasks of plant operation which are carried out by plant staff are described in the operating manual in a form which is as clear and comprehensible as possible. A considerable number of these tasks can only be carried out by man, namely: 1) tasks concerning operational organization, 2) all non-automated areas of plant operation. (orig./TK) [de

  14. Regulatory issues in accreditation of toxicology laboratories.

    Science.gov (United States)

    Bissell, Michael G

    2012-09-01

    Clinical toxicology laboratories and forensic toxicology laboratories operate in a highly regulated environment. This article outlines major US legal/regulatory issues and requirements relevant to accreditation of toxicology laboratories (state and local regulations are not covered in any depth). The most fundamental regulatory distinction involves the purposes for which the laboratory operates: clinical versus nonclinical. The applicable regulations and the requirements and options for operations depend most basically on this consideration, with clinical toxicology laboratories being directly subject to federal law including mandated options for accreditation and forensic toxicology laboratories being subject to degrees of voluntary or state government–required accreditation.

  15. Accreditation and Expansion in Danish Higher Education

    DEFF Research Database (Denmark)

    Rasmussen, Palle

    2014-01-01

    During the last decade, an accreditation system for higher education has been introduced in Denmark. Accreditation partly represents continuity from an earlier evaluation system, but it is also part of a government policy to increasingly define higher education institutions as market actors....... The attempts of universities to increase their student enrolments have combined with the logic of accreditation to produce an increasing number of higher education degrees, often overlapping in content. Students’ scope for choice has been widened, but the basis for and the consequences of choice have become...

  16. Impact of National Universities Commission (NUC) Accreditation ...

    African Journals Online (AJOL)

    Nekky Umera

    (NUC) accreditation exercise on university administrative structure of four selected Nigerian ... The Commission's recommendations led to the setting up by Government the National ... For instance, the goals of tertiary education as spelt out in ...

  17. Accreditation of undergraduate and graduate medical education

    DEFF Research Database (Denmark)

    Davis, Deborah J; Ringsted, Charlotte

    2006-01-01

    Accreditation organizations such as the Liaison Committee for Medical Education (LCME), the Royal College of Physicians and Surgeons of Canada (RCPSC), and the Accreditation Council for Graduate Medical Education (ACGME) are charged with the difficult task of evaluating the educational quality...... of medical education programs in North America. Traditionally accreditation includes a more quantitative rather than qualitative judgment of the educational facilities, resources and teaching provided by the programs. The focus is on the educational process but the contributions of these to the outcomes...... are not at all clear. As medical education moves toward outcome-based education related to a broad and context-based concept of competence, the accreditation paradigm should change accordingly. Udgivelsesdato: 2006-Aug...

  18. Student Affairs Assessment, Strategic Planning, and Accreditation

    Science.gov (United States)

    Fallucca, Amber

    2017-01-01

    This chapter illustrates how student affairs units participate in accreditation across regional agency expectations and program-level requirements. Strategies for student affairs units to engage in campus strategic planning processes to further highlight their contributions are also recommended.

  19. 42 CFR 424.58 - Accreditation.

    Science.gov (United States)

    2010-10-01

    ... enforcing the DMEPOS quality standards for suppliers of DMEPOS and other items or services. Section 1847(b... disparity, there are widespread or systemic problems in an organization's accreditation process such that...

  20. Trust, accreditation and Philanthropy in the Netherlands

    OpenAIRE

    Bekkers, R.H.F.P.

    2003-01-01

    Given the increasing numbers of scandals, the awareness among fund-raisers that the public’s trust is crucial for the nonprofit sector is growing. This study investigates the relationship between trust and charitable giving. Charitable organizations can increase the public’s trust by signaling their trustworthiness. The example of the Netherlands shows how a system of accreditation can be an instrument for signaling trustworthiness to the public. Donors aware of the accreditation system have ...

  1. Beyond accreditation: excellence in medical education.

    Science.gov (United States)

    Ahn, Eusang; Ahn, Ducksun

    2014-01-01

    Medical school accreditation is a relatively new phenomenon in Korea. The development of an accreditation body and standards for a two-tiered "Must" and "Should" system in 1997 eventually led to the implementation of a third "Excellence" level of attainment. These standards were conceived out of a desire to be able to first recognize and promote outstanding performance of medical schools, second to provide role models in medical education, and furthermore to preview the third level as potential components of the pre-existing second level for the next accreditation cycle. It is a quality-assurance mechanism that, while not required for accreditation itself, pushes medical schools to go beyond the traditional requirements of mere pass-or-fail accreditation adequacy, and encourages schools to deliver an unprecedented level of medical education. The Association for Medical Education in Europe developed its own third-tier system of evaluation under the ASPIRE project, with many similar goals. Due to its advanced nature and global scope, the Korean accreditation body has decided to implement the ASPIRE system in Korea as well.

  2. Medical students’ perceptions of international accreditation

    Science.gov (United States)

    Abdel-Razig, Sawsan; Nair, Satish C

    2015-01-01

    Objectives This study aimed to explore the perceptions of medical students in a developing medical education system towards international accreditation. Methods Applicants to an Internal Medicine residency program in an academic medical center in the United Arab Emirates (UAE) accredited by the Accreditation Council for Graduate Medical Education-International (ACGME-I) were surveyed between May and June 2014. The authors analysed responses using inductive qualitative thematic analysis to identify emergent themes. Results Seventy-eight of 96 applicants (81%) completed the survey. The vast majority of respondents 74 (95%) reported that ACGME-I accreditation was an important factor in selecting a residency program. Five major themes were identified, namely improving the quality of education, increasing opportunities, meeting high international standards, improving program structure, and improving patient care. Seven (10%) of respondents felt they would be in a position to pursue fellowship training or future employment in the United States upon graduation from an ACGME-I program. Conclusions UAE trainees have an overwhelmingly positive perception of international accreditation, with an emphasis on improving the quality of training provided. Misperceptions, however, exist about potential opportunities available to graduates of ACGME-I programs. As more countries adopt the standards of the ACGME-I or other international accrediting bodies, it is important to recognize and foster trainee “buy-in” of educational reform initiatives. PMID:26454402

  3. Medical students' perceptions of international accreditation.

    Science.gov (United States)

    Ibrahim, Halah; Abdel-Razig, Sawsan; Nair, Satish C

    2015-10-11

    This study aimed to explore the perceptions of medical students in a developing medical education system towards international accreditation. Applicants to an Internal Medicine residency program in an academic medical center in the United Arab Emirates (UAE) accredited by the Accreditation Council for Graduate Medical Education-International (ACGME-I) were surveyed between May and June 2014. The authors analysed responses using inductive qualitative thematic analysis to identify emergent themes. Seventy-eight of 96 applicants (81%) completed the survey. The vast majority of respondents 74 (95%) reported that ACGME-I accreditation was an important factor in selecting a residency program. Five major themes were identified, namely improving the quality of education, increasing opportunities, meeting high international standards, improving program structure, and improving patient care. Seven (10%) of respondents felt they would be in a position to pursue fellowship training or future employment in the United States upon graduation from an ACGME-I program. UAE trainees have an overwhelmingly positive perception of international accreditation, with an emphasis on improving the quality of training provided. Misperceptions, however, exist about potential opportunities available to graduates of ACGME-I programs. As more countries adopt the standards of the ACGME-I or other international accrediting bodies, it is important to recognize and foster trainee "buy-in" of educational reform initiatives.

  4. GRACE manual

    International Nuclear Information System (INIS)

    Ishikawa, T.; Kawabata, S.; Shimizu, Y.; Kaneko, T.; Kato, K.; Tanaka, H.

    1993-02-01

    This manual is composed of three kinds of objects, theoretical background for calculating the cross section of elementary process, usage and technical details of the GRACE system. Throughout this manual we take the tree level process e + e - → W + W - γ as an example, including the e ± -scalar boson interactions. The real FORTRAN source code for this process is attached in the relevant sections as well as the results of calculation, which might be a great help for understanding the practical use of the system. (J.P.N.)

  5. A Comprehensive Expedient Methods Field Manual.

    Science.gov (United States)

    1984-09-01

    percent. Water will quickly become a killer. As temperatures rise to 120 to 125 degrees farenheit , such as in an armored personnel carrier or other...of 100KW or less unless absolutely necessary, since they are not designed for parallel operation. It is sager to use a single smaller unit for each...facility (3: 12, 13). " ~102 "" ...-. o Derating Generators. Generators are rated under the standard conditions of zero to 2,000 feet above sea level

  6. Large Hadron Collider manual

    CERN Document Server

    Lavender, Gemma

    2018-01-01

    What is the universe made of? How did it start? This Manual tells the story of how physicists are seeking answers to these questions using the world’s largest particle smasher – the Large Hadron Collider – at the CERN laboratory on the Franco-Swiss border. Beginning with the first tentative steps taken to build the machine, the digestible text, supported by color photographs of the hardware involved, along with annotated schematic diagrams of the physics experiments, covers the particle accelerator’s greatest discoveries – from both the perspective of the writer and the scientists who work there. The Large Hadron Collider Manual is a full, comprehensive guide to the most famous, record-breaking physics experiment in the world, which continues to capture the public imagination as it provides new insight into the fundamental laws of nature.

  7. TAP 2, Performance-Based Training Manual

    Energy Technology Data Exchange (ETDEWEB)

    1991-07-01

    Training programs at DOE nuclear facilities should provide well- trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two comparison manuals provide additional information to assist contractors in their efforts to accredit training programs.

  8. TAP 2, Performance-Based Training Manual

    International Nuclear Information System (INIS)

    1991-07-01

    Training programs at DOE nuclear facilities should provide well- trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two comparison manuals provide additional information to assist contractors in their efforts to accredit training programs

  9. TAP 3, Training Program Support Manual

    International Nuclear Information System (INIS)

    1991-07-01

    Training programs at DOE facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs

  10. CDC/NACCHO Accreditation Support Initiative: advancing readiness for local and tribal health department accreditation.

    Science.gov (United States)

    Monteiro, Erinn; Fisher, Jessica Solomon; Daub, Teresa; Zamperetti, Michelle Chuk

    2014-01-01

    Health departments have various unique needs that must be addressed in preparing for national accreditation. These needs require time and resources, shortages that many health departments face. The Accreditation Support Initiative's goal was to test the assumption that even small amounts of dedicated funding can help health departments make important progress in their readiness to apply for and achieve accreditation. Participating sites' scopes of work were unique to the needs of each site and based on the proposed activities outlined in their applications. Deliverables and various sources of data were collected from sites throughout the project period (December 2011-May 2012). Awardees included 1 tribal and 12 local health departments, as well as 5 organizations supporting the readiness of local and tribal health departments. Sites dedicated their funding toward staff time, accreditation fees, completion of documentation, and other accreditation readiness needs and produced a number of deliverables and example documents. All sites indicated that they made accreditation readiness gains that would not have occurred without this funding. Preliminary evaluation data from the first year of the Accreditation Support Initiative indicate that flexible funding arrangements may be an effective way to increase health departments' accreditation readiness.

  11. Proposed Accreditation Standards for Degree-Granting Correspondence Programs Offered by Accredited Institutions.

    Science.gov (United States)

    McGraw-Hill Continuing Education Center, Washington, DC.

    A study on proposed accreditation standards grew out of a need to (1) stimulate the growth of quality correspondence degree programs; and (2) provide a policy for accreditation of correspondence degree programs so that graduates would be encouraged to pursue advanced degree programs offered elsewhere by educational institutions. The study focused…

  12. Accreditation Outcome Scores: Teacher Attitudes toward the Accreditation Process and Professional Development

    Science.gov (United States)

    Ulmer, Phillip Gregory

    2015-01-01

    Accreditation is an essential component in the history of education in the United States and is a central catalyst for quality education, continuous improvement, and positive growth in student achievement. Although previous researchers identified teachers as an essential component in meeting accreditation outcomes, additional information was…

  13. IS 2010 and ABET Accreditation: An Analysis of ABET-Accredited Information Systems Programs

    Science.gov (United States)

    Saulnier, Bruce; White, Bruce

    2011-01-01

    Many strong forces are converging on information systems academic departments. Among these forces are quality considerations, accreditation, curriculum models, declining/steady student enrollments, and keeping current with respect to emerging technologies and trends. ABET, formerly the Accrediting Board for Engineering and Technology, is at…

  14. 42 CFR 8.13 - Revocation of accreditation and accreditation body approval.

    Science.gov (United States)

    2010-10-01

    ... GENERAL PROVISIONS CERTIFICATION OF OPIOID TREATMENT PROGRAMS Certification and Treatment Standards § 8.13... period of 1 year after the date of withdrawal of approval of the accreditation body, unless SAMHSA.... (2) Within 1 year from the date of withdrawal of approval of an accreditation body, or within any...

  15. Optoelectronics circuits manual

    CERN Document Server

    Marston, R M

    1999-01-01

    This manual is a useful single-volume guide specifically aimed at the practical design engineer, technician, and experimenter, as well as the electronics student and amateur. It deals with the subject in an easy to read, down to earth, and non-mathematical yet comprehensive manner, explaining the basic principles and characteristics of the best known devices, and presenting the reader with many practical applications and over 200 circuits. Most of the ICs and other devices used are inexpensive and readily available types, with universally recognised type numbers.The second edition

  16. Proficiency test in the accreditation system

    International Nuclear Information System (INIS)

    Legarda, F.; Herranz, M.; Idoeta, R.

    2008-01-01

    In the accreditation process of a radioactivity measurements laboratory, according to ISO standard 17025, proficiency tests play a fundamental role. These PTs constitute an irreplaceable tool for the validation of measuring methods. In the case of Spain, ENAC, which is the Spanish accreditation national body, requires that the laboratory has to take part in a PT for each one of the accredited measuring methods in the period of time between two reassessments of the accreditation, what happens every 4-5 years. In specific areas of determination procedures, among which radioactive measurements could be included, the number of methods which can be accredited is very large. The purpose of the present work is to establish a classification into families of the different radioactivity measurement procedures, as well as to establish complementary actions that guarantee that carrying out periodically proficiency-tests on any of the included procedures in each family, every measurement procedure include in that family is controlled, complying with the criteria established by ENAC

  17. Metrication manual

    International Nuclear Information System (INIS)

    Harper, A.F.A.; Digby, R.B.; Thong, S.P.; Lacey, F.

    1978-04-01

    In April 1978 a meeting of senior metrication officers convened by the Commonwealth Science Council of the Commonwealth Secretariat, was held in London. The participants were drawn from Australia, Bangladesh, Britain, Canada, Ghana, Guyana, India, Jamaica, Papua New Guinea, Solomon Islands and Trinidad and Tobago. Among other things, the meeting resolved to develop a set of guidelines to assist countries to change to SI and to compile such guidelines in the form of a working manual

  18. HPS instrument calibration laboratory accreditation program

    Energy Technology Data Exchange (ETDEWEB)

    Masse, F.X; Eisenhower, E.H.; Swinth, K.L.

    1993-12-31

    The purpose of this paper is to provide an accurate overview of the development and structure of the program established by the Health Physics Society (HPS) for accrediting instrument calibration laboratories relative to their ability to accurately calibrate portable health physics instrumentation. The purpose of the program is to provide radiation protection professionals more meaningful direct and indirect access to the National Institute of Standards and Technology (NIST) national standards, thus introducing a means for improving the uniformity, accuracy, and quality of ionizing radiation field measurements. The process is designed to recognize and document the continuing capability of each accredited laboratory to accurately perform instrument calibration. There is no intent to monitor the laboratory to the extent that each calibration can be guaranteed by the program; this responsibility rests solely with the accredited laboratory.

  19. Strengthening organizational performance through accreditation research-a framework for twelve interrelated studies: the ACCREDIT project study protocol

    Directory of Open Access Journals (Sweden)

    Pope Catherine

    2011-10-01

    Full Text Available Abstract Background Service accreditation is a structured process of recognising and promoting performance and adherence to standards. Typically, accreditation agencies either receive standards from an authorized body or develop new and upgrade existing standards through research and expert views. They then apply standards, criteria and performance indicators, testing their effects, and monitoring compliance with them. The accreditation process has been widely adopted. The international investments in accreditation are considerable. However, reliable evidence of its efficiency or effectiveness in achieving organizational improvements is sparse and the value of accreditation in cost-benefit terms has yet to be demonstrated. Although some evidence suggests that accreditation promotes the improvement and standardization of care, there have been calls to strengthen its research base. In response, the ACCREDIT (Accreditation Collaborative for the Conduct of Research, Evaluation and Designated Investigations through Teamwork project has been established to evaluate the effectiveness of Australian accreditation in achieving its goals. ACCREDIT is a partnership of key researchers, policymakers and agencies. Findings We present the framework for our studies in accreditation. Four specific aims of the ACCREDIT project, which will direct our findings, are to: (i evaluate current accreditation processes; (ii analyse the costs and benefits of accreditation; (iii improve future accreditation via evidence; and (iv develop and apply new standards of consumer involvement in accreditation. These will be addressed through 12 interrelated studies designed to examine specific issues identified as a high priority. Novel techniques, a mix of qualitative and quantitative methods, and randomized designs relevant for health-care research have been developed. These methods allow us to circumvent the fragmented and incommensurate findings that can be generated in small

  20. Strengthening organizational performance through accreditation research-a framework for twelve interrelated studies: the ACCREDIT project study protocol.

    Science.gov (United States)

    Braithwaite, Jeffrey; Westbrook, Johanna; Johnston, Brian; Clark, Stephen; Brandon, Mark; Banks, Margaret; Hughes, Clifford; Greenfield, David; Pawsey, Marjorie; Corbett, Angus; Georgiou, Andrew; Callen, Joanne; Ovretveit, John; Pope, Catherine; Suñol, Rosa; Shaw, Charles; Debono, Deborah; Westbrook, Mary; Hinchcliff, Reece; Moldovan, Max

    2011-10-09

    Service accreditation is a structured process of recognising and promoting performance and adherence to standards. Typically, accreditation agencies either receive standards from an authorized body or develop new and upgrade existing standards through research and expert views. They then apply standards, criteria and performance indicators, testing their effects, and monitoring compliance with them. The accreditation process has been widely adopted. The international investments in accreditation are considerable. However, reliable evidence of its efficiency or effectiveness in achieving organizational improvements is sparse and the value of accreditation in cost-benefit terms has yet to be demonstrated. Although some evidence suggests that accreditation promotes the improvement and standardization of care, there have been calls to strengthen its research base.In response, the ACCREDIT (Accreditation Collaborative for the Conduct of Research, Evaluation and Designated Investigations through Teamwork) project has been established to evaluate the effectiveness of Australian accreditation in achieving its goals. ACCREDIT is a partnership of key researchers, policymakers and agencies. We present the framework for our studies in accreditation. Four specific aims of the ACCREDIT project, which will direct our findings, are to: (i) evaluate current accreditation processes; (ii) analyse the costs and benefits of accreditation; (iii) improve future accreditation via evidence; and (iv) develop and apply new standards of consumer involvement in accreditation. These will be addressed through 12 interrelated studies designed to examine specific issues identified as a high priority. Novel techniques, a mix of qualitative and quantitative methods, and randomized designs relevant for health-care research have been developed. These methods allow us to circumvent the fragmented and incommensurate findings that can be generated in small-scale, project-based studies. The overall

  1. Calibration Laboratory for Medical Physics towards ISO/ IEC 17025 accreditation: Experience and challenges

    International Nuclear Information System (INIS)

    Asmaliza Hashim; Abdul Aziz Ramli; Muhammad Jamal Isa; Sharul Azlan Azizan

    2011-01-01

    Medical Physics Calibration Laboratory is laboratory where placed under Medical Physics Group, Radiation Healthy and Safety Division. This laboratory offers calibration services to their customers that covered doses calibration, tube voltan (kVp), exposure doses, sensitometer and densitometer. After 12 years of operation, it is the right time for this laboratory to upgrade their quality services based on ISO/ IEC 17025. Accreditation scope covered calibration for diagnostic doses only. Starting from 2009, serious effort was done to prepare the quality documents that covered quality manual, quality procedure and work orders. Meanwhile, several series of audit were done by Quality Management Center (QMC), now Innovation Management Center (IMC) with collaboration with Standard Department. This paper works revealed challenges and experience during the process toward ISO/ IEC 17025 accreditation. (author)

  2. Accreditation, a tool for business competitiveness

    International Nuclear Information System (INIS)

    Rivera, B.

    2015-01-01

    Conformity Assessment Bodies (laboratories , certification and inspection bodies, etc ) assess conformity of products and services to requirements , usually relating to quality and safety. For their activities to provide due confidence both in national and international markets these bodies must demonstrate to have the relevant technical competence and to perform according to international standards. This confidence is based on the assessments conducted in different countries by the accreditation body in Spain ENAC. Using accredited conformity assessment bodies bodies: risks are minimized; customer confidence is increased; acceptance in foreign countries is enhanced; self-regulation is promoted. (Author)

  3. Pathway to Accreditation of Medical laboratories in Mauritius

    African Journals Online (AJOL)

    Nafiisah

    The issue of quality management systems and accreditation is gaining increasing ... MAURITAS is to provide accreditation services to testing/calibration ... carries out its own, internal, audits on a regular basis and record the results for scrutiny ...

  4. Quality and accreditation in higher education: integration and internationalization of Latin America and the Caribbean

    Directory of Open Access Journals (Sweden)

    Jorge González González

    2013-10-01

    Full Text Available The paper discusses the concepts of «quality» and «accreditation» in education with different meanings, and proposes comprehensive definitions that have been put into practice by the Union of Universities of Latin America and the Caribbean and the International Network of Evaluators through model «V» evaluation planningfor continuous improvement, integration and internationalization of higher education.

  5. Impact of quality concepts on nuclear engineering accreditation

    International Nuclear Information System (INIS)

    Woodall, D.M.

    1993-01-01

    This paper is an update of the accreditation process for nuclear engineering education at the undergraduate and graduate level in U.S. universities and colleges. The Engineering Accreditation Commission (EAC) of the Accreditation Board for Engineering and Technology (ABET) has made a number of major changes in the process for engineering accreditation in recent years. This paper identifies those changes that have taken place, discusses the rationale for those changes, and encourages U.S. universities with nuclear engineering programs to respond

  6. DOE standard: The Department of Energy Laboratory Accreditation Program administration

    International Nuclear Information System (INIS)

    1998-12-01

    This technical standard describes the US Department of Energy Laboratory Accreditation Program (DOELAP), organizational responsibilities, and the accreditation process. DOELAP evaluates and accredits personnel dosimetry and radiobioassay programs used for worker monitoring and protection at DOE and DOE contractor sites and facilities as required in Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection. The purpose of this technical standard is to establish procedures for administering DOELAP and acquiring accreditation

  7. Practical Nursing Education: Criteria and Procedures for Accreditation.

    Science.gov (United States)

    National Association for Practical Nurse Education and Service, Inc., New York, NY.

    The third in a series of pamphlets on practical nursing education, this document contains information on accreditation standards governing nursing programs. Included are announcements of: (1) available accreditation and consultation services, (2) policies regulating accreditation eligibility, (3) standards of ethics by which nursing programs are…

  8. Accreditation in the Professions: Implications for Educational Leadership Preparation Programs

    Science.gov (United States)

    Pavlakis, Alexandra; Kelley, Carolyn

    2016-01-01

    Program accreditation is a process based on a set of professional expectations and standards meant to signal competency and credibility. Although accreditation has played an important role in shaping educational leadership preparation programs, recent revisions to accreditation processes and standards have highlighted attention to the purposes,…

  9. 9 CFR 161.3 - Standards for accredited veterinarian duties.

    Science.gov (United States)

    2010-01-01

    ... legally able to practice veterinary medicine. An accredited veterinarian shall perform the functions of an... examine such an animal showing abnormalities, in order to determine whether or not there is clinical... accredited work, an accredited veterinarian shall take such measures of sanitation as are necessary to...

  10. 9 CFR 439.10 - Criteria for obtaining accreditation.

    Science.gov (United States)

    2010-01-01

    ... degree in chemistry, food science, food technology, or a related field. (i) For food chemistry... ACT ACCREDITATION OF NON-FEDERAL CHEMISTRY LABORATORIES § 439.10 Criteria for obtaining accreditation. (a) Analytical laboratories may be accredited for the analyses of food chemistry analytes, as defined...

  11. TAP 2: Performance-Based Training Manual

    International Nuclear Information System (INIS)

    1993-08-01

    Cornerstone of safe operation of DOE nuclear facilities is personnel performing day-to-day functions which accomplish the facility mission. Performance-based training is fundamental to the safe operation. This manual has been developed to support the Training Accreditation Program (TAP) and assist contractors in efforts to develop performance-based training programs. It provides contractors with narrative procedures on performance-based training that can be modified and incorporated for facility-specific application. It is divided into sections dealing with analysis, design, development, implementation, and evaluation

  12. Ties That Bind: Default, Accreditation, and Articulation.

    Science.gov (United States)

    Prager, Carolyn

    1995-01-01

    Examines changes in the accreditation environment and the resulting implications for the articulation of students from for-profit to not-for-profit institutions such as community colleges. Indicates that the costs of programmatic redundancy and duplication brought about by mission convergence at these institutions will emerge as a major policy…

  13. Quality Development in Healthcare: Participation vs. Accreditation

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Hertzum, Morten; Scheuer, John Damm

    2018-01-01

    and balanced with participatory approaches that allow for local experimentation and implementation of high-quality outcomes. We describe accreditation and participatory design as two approaches to reconfiguring and aligning work organisation and technology; further, we emphasise the differences in each...

  14. Accrediting Professional Education: Research and Policy Issues.

    Science.gov (United States)

    Koff, Robert H.; Florio, David H.

    Research and legal issues that relate to accreditation policy questions for schools, colleges, and departments of education are reviewed, and strategies for integrating empirical information and social/professional values are presented. The discussion divides into three sections: (1) information concerning a variety of contextual issues that…

  15. 42 CFR 423.168 - Accreditation organizations.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Accreditation organizations. 423.168 Section 423.168 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM VOLUNTARY MEDICARE PRESCRIPTION DRUG BENEFIT Cost Control and Quality...

  16. The American Association for Laboratory Accreditation

    Science.gov (United States)

    2011-03-28

    ISO / IEC 17025 ...Information Technology A2LA DoD ELAP Program n All labs are assessed to ISO / IEC 17025 :2005 as the base standard. n In addition, the requirements of 2003...n Inspection Body Accreditation ( ISO / IEC 17020) n Proficiency Testing Providers ( ISO / IEC 17043) n Reference Materials Producers ( ISO Guide

  17. Digital PET compliance to EARL accreditation specifications

    NARCIS (Netherlands)

    Koopman, Daniëlle; Groot Koerkamp, Maureen; Jager, Pieter L.; Arkies, Hester; Knollema, Siert; Slump, Cornelis H.; Sanches, Pedro G.; van Dalen, Jorn A.

    2017-01-01

    Background: Our aim was to evaluate if a recently introduced TOF PET system with digital photon counting technology (Philips Healthcare), potentially providing an improved image quality over analogue systems, can fulfil EANM research Ltd (EARL) accreditation specifications for tumour imaging with

  18. 42 CFR 422.157 - Accreditation organizations.

    Science.gov (United States)

    2010-10-01

    ..., on an annual basis, summary data specified by CMS that relate to the past year's accreditation... respect to the standard or standards in question. (2) It complies with the application and reapplication... term of the approval, which may not exceed 6 years. (c) Ongoing responsibilities of an approved...

  19. The National Accreditation Board for Hospital and Health Care Providers accreditation programme in India.

    Science.gov (United States)

    Gyani, Girdhar J; Krishnamurthy, B

    2014-01-01

    Quality in health care is important as it is directly linked with patient safety. Quality as we know is driven either by regulation or by market demand. Regulation in most developing countries has not been effective, as there is shortage of health care providers and governments have to be flexible. In such circumstances, quality has taken a back seat. Accreditation symbolizes the framework for quality governance of a hospital and is based on optimum standards. Not only is India establishing numerous state of the art hospitals, but they are also experiencing an increase in demand for quality as well as medical tourism. India launched its own accreditation system in 2006, conforming to standards accredited by ISQua. This article shows the journey to accreditation in India and describes the problems encountered by hospitals as well as the benefits it has generated for the industry and patients.

  20. Comprehensive Care

    Science.gov (United States)

    ... Comprehensive Care Share this page Facebook Twitter Email Comprehensive Care Understand the importance of comprehensive MS care ... In this article A complex disease requires a comprehensive approach Today multiple sclerosis (MS) is not a ...

  1. Trends in Accreditation Council for Graduate Medical Education Accreditation for Subspecialty Fellowship Training in Plastic Surgery.

    Science.gov (United States)

    Silvestre, Jason; Serletti, Joseph M; Chang, Benjamin

    2018-05-01

    The purposes of this study were to (1) determine the proportion of plastic surgery residents pursuing subspecialty training relative to other surgical specialties, and (2) analyze trends in Accreditation Council for Graduate Medical Education accreditation of plastic surgery subspecialty fellowship programs. The American Medical Association provided data on career intentions of surgical chief residents graduating from 2014 to 2016. The percentage of residents pursuing fellowship training was compared by specialty. Trends in the proportion of accredited fellowship programs in craniofacial surgery, hand surgery, and microsurgery were analyzed. The percentage of accredited programs was compared between subspecialties with added-certification options (hand surgery) and subspecialties without added-certification options (craniofacial surgery and microsurgery). Most integrated and independent plastic surgery residents pursued fellowship training (61.8 percent versus 49.6 percent; p = 0.014). Differences existed by specialty from a high in orthopedic surgery (90.8 percent) to a low in colon and rectal surgery (3.2 percent). From 2005 to 2015, the percentage of accredited craniofacial fellowship programs increased, but was not significant (from 27.8 percent to 33.3 percent; p = 0.386). For hand surgery, the proportion of accredited programs that were plastic surgery (p = 0.755) and orthopedic surgery (p = 0.253) was stable, whereas general surgery decreased (p = 0.010). Subspecialty areas with added-certification options had more accredited fellowships than those without (100 percent versus 19.2 percent; p < 0.001). There has been slow adoption of accreditation among plastic surgery subspecialty fellowships, but added-certification options appear to be highly correlated.

  2. [Self-audit and tutor accreditation].

    Science.gov (United States)

    Ezquerra Lezcano, Matilde; Tamayo Ojeda, Carmen; Calvet Junoy, Silvia; Avellana Revuelta, Esteve; Vila-Coll, María Antonia; Morera Jordán, Concepción

    2010-02-01

    To describe the experience of using self-audit (SA) as a means of accrediting family and community medicine tutors, to analyse the knowledge that the tutors have on this self-assessment methodology, and to record their opinions on this method. Retrospective descriptive study and analysis of an opinion questionnaire. Family and community medicine teaching units (TU) in Catalonia. Tutors from family and community medicine TU in Catalonia (July 2001-July 2008). Training of the tutors in SA methodology, creation of a reference group and a correction cycle. Correction by peers of the SAs performed by the tutors according to previously determined criteria and subsequent issue of a report-feedback. Self-administered questionnaire by a group of TU tutors. A total of 673 SA were performed. The most frequent topic selected was diabetes mellitus in 27.9% of cases. The overall evaluation of the SA from a methodological point of view was correct in 44.5% of cases, improvable in 45.3%, and deficient in 10.2%. A total of 300 opinion questionnaires were issued. The response rate was 151/300 (50.03%). On the question about the usefulness of the SA in professional practice, 12% considered it very useful, 56% adequate, and 32% of little use or not useful. As regards whether it was a good means for the re-accreditation or accreditation of tutors, 66% considered that it was not. A high percentage of the SAs analysed are not carried out correctly, which indicates that tutors do not know this self-assessment method very well. They consider that SAs are a useful tool for improving clinical practice, but not a good means for accreditation and re-accreditation.

  3. 22 CFR 96.99 - Converting an application for temporary accreditation to an application for full accreditation.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Converting an application for temporary accreditation to an application for full accreditation. 96.99 Section 96.99 Foreign Relations DEPARTMENT OF... INTERCOUNTRY ADOPTION ACT OF 2000 (IAA) Procedures and Standards Relating to Temporary Accreditation § 96.99...

  4. Pdap Manual

    DEFF Research Database (Denmark)

    Pedersen, Mads Mølgaard; Larsen, Torben J.

    Pdap, Python Data Analysis Program, is a program for post processing, analysis, visualization and presentation of data e.g. simulation results and measurements. It is intended but not limited to the domain of wind turbines. It combines an intuitive graphical user interface with python scripting...... that allows automation and implementation of custom functions. This manual gives a short introduction to the graphical user interface, describes the mathematical background for some of the functions, describes the scripting API and finally a few examples on how automate analysis via scripting is presented....... The newest version, and more documentation and help on how to used, extend and automate Pdap can be found at the webpage www.hawc2.dk...

  5. Does accreditation stimulate change? A study of the impact of the accreditation process on Canadian healthcare organizations

    Directory of Open Access Journals (Sweden)

    Shabah Abdo

    2010-04-01

    Full Text Available Abstract Background One way to improve quality and safety in healthcare organizations (HCOs is through accreditation. Accreditation is a rigorous external evaluation process that comprises self-assessment against a given set of standards, an on-site survey followed by a report with or without recommendations, and the award or refusal of accreditation status. This study evaluates how the accreditation process helps introduce organizational changes that enhance the quality and safety of care. Methods We used an embedded multiple case study design to explore organizational characteristics and identify changes linked to the accreditation process. We employed a theoretical framework to analyze various elements and for each case, we interviewed top managers, conducted focus groups with staff directly involved in the accreditation process, and analyzed self-assessment reports, accreditation reports and other case-related documents. Results The context in which accreditation took place, including the organizational context, influenced the type of change dynamics that occurred in HCOs. Furthermore, while accreditation itself was not necessarily the element that initiated change, the accreditation process was a highly effective tool for (i accelerating integration and stimulating a spirit of cooperation in newly merged HCOs; (ii helping to introduce continuous quality improvement programs to newly accredited or not-yet-accredited organizations; (iii creating new leadership for quality improvement initiatives; (iv increasing social capital by giving staff the opportunity to develop relationships; and (v fostering links between HCOs and other stakeholders. The study also found that HCOs' motivation to introduce accreditation-related changes dwindled over time. Conclusions We conclude that the accreditation process is an effective leitmotiv for the introduction of change but is nonetheless subject to a learning cycle and a learning curve. Institutions invest

  6. [Accreditation of clinical laboratories based on ISO standards].

    Science.gov (United States)

    Kawai, Tadashi

    2004-11-01

    International Organization for Standardization (ISO) have published two international standards (IS) to be used for accreditation of clinical laboratories; ISO/IEC 17025:1999 and ISO 15189:2003. Any laboratory accreditation body must satisfy the requirements stated in ISO/IEC Guide 58. In order to maintain the quality of the laboratory accreditation bodies worldwide, the International Laboratory Accreditation Cooperation (ILAC) has established the mutual recognition arrangement (MRA). In Japan, the International Accreditation Japan (IAJapan) and the Japan Accreditation Board for Conformity Assessment (JAB) are the members of the ILAC/MRA group. In 2003, the Japanese Committee for Clinical Laboratory Standards (JCCLS) and the JAB have established the Development Committee of Clinical Laboratory Accreditation Program (CLAP), in order to establish the CLAP, probably starting in 2005.

  7. Accreditation in a public hospital: perceptions of a multidisciplinary team.

    Science.gov (United States)

    Camillo, Nadia Raquel Suzini; Oliveira, João Lucas Campos de; Bellucci Junior, José Aparecido; Cervilheri, Andressa Hirata; Haddad, Maria do Carmo Fernandez Lourenço; Matsuda, Laura Misue

    2016-06-01

    to analyze the perceptions of the multidisciplinary team on Accreditation in a public hospital. descriptive, exploratory, qualitative research, performed in May 2014, using recorded individual interviews. In total, 28 employees of a public hospital, Accredited with Excellence, answered the guiding question: "Tell me about the Accreditation system used in this hospital". The interviews were transcribed and subjected to content analysis. of the speeches, three categories emerged: Advantages offered by the Accreditation; Accredited public hospital resembling a private hospital; Pride/satisfaction for acting in an accredited public hospital. participants perceived Accreditation as a favorable system for a quality management in the public service because it promotes the development of professional skills and improves cost management, organizational structure, management of assistance and perception of job pride/satisfaction.

  8. Caltrans : construction manual

    Science.gov (United States)

    2009-08-01

    Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

  9. ACEHSA accreditation safeguards the public interest.

    Science.gov (United States)

    Sundre, Steven M

    2004-01-01

    Daily, we are reminded that the public's investment in attaining quality health and medical care is among the most important priorities of our nation's citizens. Central to realizing that attainment is the level of professional competence of those charged with managing the nation's health resources. The not-for-profit Accrediting Commission on Education for Health Services Administration is the sole national organization governing the standards by which future health managers, administrators, and executives are educated and trained in accredited graduate programs. The impact of the ACEHSA is growing as health and medical leaders, government and regulatory policy-makers, insurance executives, special interest groups, and, of course, members of the public increasingly realize that top-flight healthcare delivery requires excellence in the management of health resources.

  10. The globalization of accreditation in the professions.

    Science.gov (United States)

    Lenn, M P

    1996-01-01

    The direct relationship between educational quality and a successful economy, the proliferation of regional and global trade agreements which encourage professional mobility, and the growing international recognition of academic degrees are contributing factors to the globalization of quality assurance in higher education, including accreditation. On every continent, attention is being paid to developing professional educational standards within an international context, assuring that ¿world class¿ professionals are produced for international as well as national practice.

  11. Accreditation of diagnostic imaging services in developing countries.

    Science.gov (United States)

    Jiménez, Pablo; Borrás, Cari; Fleitas, Ileana

    2006-01-01

    In recent decades, medical imaging has experienced a technological revolution. After conducting several surveys to assess the quality and safety of diagnostic imaging services in Latin America and the Caribbean, the Pan American Health Organization (PAHO) developed a basic accreditation program that can be implemented by the ministry of health of any developing country. Patterned after the American College of Radiology's accreditation program, the PAHO program relies on a national accreditation committee to establish and maintain accreditation standards. The process involves a peer review evaluation of: (1) imaging and processing equipment, (2) physician and technologist staff qualifications, (3) quality control and quality assurance programs, and (4) image quality and, where applicable, radiation dose. Public and private conventional radiography/fluoroscopy, mammography, and ultrasound services may request accreditation. The radiography/fluoroscopy accreditation program has three modules from which to choose: chest radiography, general radiography, and fluoroscopy. The national accreditation committee verifies compliance with the standards. On behalf of the ministry of health, the accreditation committee also issues a three-year accreditation certificate. As needed, the accreditation committee consults with foreign technical and clinical experts.

  12. Scoping medical tourism and international hospital accreditation growth.

    Science.gov (United States)

    Woodhead, Anthony

    2013-01-01

    Uwe Reinhardt stated that medical tourism can do to the US healthcare system what the Japanese automotive industry did to American carmakers after Japanese products developed a value for money and reliability reputation. Unlike cars, however, healthcare can seldom be test-driven. Quality is difficult to assess after an intervention (posteriori), therefore, it is frequently evaluated via accreditation before an intervention (a priori). This article aims to scope the growth in international accreditation and its relationship to medical tourism markets. Using self-reported data from Accreditation Canada, Joint Commission International (JCI) and Australian Council on Healthcare Standards (ACHS), this article examines how quickly international accreditation is increasing, where it is occurring and what providers have been accredited. Since January 2000, over 350 international hospitals have been accredited; the JCI's total nearly tripling between 2007-2011. Joint Commission International staff have conducted most international accreditation (over 90 per cent). Analysing which countries and regions where the most international accreditation has occurred indicates where the most active medical tourism markets are. However, providers will not solely be providing care for medical tourists. Accreditation will not mean that mistakes will never happen, but that accredited providers are more willing to learn from them, to varying degrees. If a provider has been accredited by a large international accreditor then patients should gain some reassurance that the care they receive is likely to be a good standard. The author questions whether commercializing international accreditation will improve quality, arguing that research is necessary to assess the accreditation of these growing markets.

  13. Quality management and accreditation of research tissue banks: experience of the National Center for Tumor Diseases (NCT) Heidelberg.

    Science.gov (United States)

    Herpel, Esther; Röcken, Christoph; Manke, Heike; Schirmacher, Peter; Flechtenmacher, Christa

    2010-12-01

    Tissue banks are key resource and technology platforms in biomedical research that address the molecular pathogenesis of diseases as well as disease prevention, diagnosis, and treatment. Due to the central role of tissue banks in standardized collection, storage, and distribution of human tissues and their derivatives, quality management and its external assessment is becoming increasingly relevant for the maintenance, acceptance, and funding of tissue banks. Little experience exists regarding formalized external evaluation of tissue banks, especially regarding certification and accreditation. Based on the accreditation of the National Center of Tumor Diseases (NCT) tissue bank in Heidelberg (Germany), criteria, requirements, processes, and implications were compiled and evaluated. Accreditation formally approved professional competence and performance of the tissue bank in all steps involved in tissue collection, storage, handling as well as macroscopic and histologic examination and final (exit) examination of the tissue and transfer supervised by board-certified competent histopathologists. Thereby, accreditation provides a comprehensive measure to evaluate and document the quality standard of tissue research banks and may play a significant role in the future assessment of tissue banks. Furthermore, accreditation may support harmonization and standardization of tissue banking for biomedical research purposes.

  14. PAEA Accreditation Task Force Briefing Paper: Moving Toward Profession-Defined, Outcomes-Based Accreditation.

    Science.gov (United States)

    Bondy, Mary Jo; Fletcher, Sara; Lane, Steven

    2017-12-01

    In anticipation of a revision to the Standards for Accreditation, the Phyisician Assistant Education Association (PAEA) charged a small task force to develop a strategy for engaging its members in the revision process. Rather than focusing on the current Standards, the task force members recommend a backward design approach to determine the desired outcomes of a successful revision to the Standards. Ultimately, the group believes that shifting to a profession-defined, outcomes-based model for accreditation will allow for greater innovation in physician assistant education and reduce the strain on programs facing resource limitations, particularly clinical site shortages. Task force members value accreditation and urge a paradigm shift in the Standards revision process to focus on meaningful educational outcomes that lead to enhanced program quality and patient safety.

  15. Quality indicators to compare accredited independent pharmacies and accredited chain pharmacies in Thailand.

    Science.gov (United States)

    Arkaravichien, Wiwat; Wongpratat, Apichaya; Lertsinudom, Sunee

    2016-08-01

    Background Quality indicators determine the quality of actual practice in reference to standard criteria. The Community Pharmacy Association (Thailand), with technical support from the International Pharmaceutical Federation, developed a tool for quality assessment and quality improvement at community pharmacies. This tool has passed validity and reliability tests, but has not yet had feasibility testing. Objective (1) To test whether this quality tool could be used in routine settings. (2) To compare quality scores between accredited independent and accredited chain pharmacies. Setting Accredited independent pharmacies and accredited chain pharmacies in the north eastern region of Thailand. Methods A cross sectional study was conducted in 34 accredited independent pharmacies and accredited chain pharmacies. Quality scores were assessed by observation and by interviewing the responsible pharmacists. Data were collected and analyzed by independent t-test and Mann-Whitney U test as appropriate. Results were plotted by histogram and spider chart. Main outcome measure Domain's assessable scores, possible maximum scores, mean and median of measured scores. Results Domain's assessable scores were close to domain's possible maximum scores. This meant that most indicators could be assessed in most pharmacies. The spider chart revealed that measured scores in the personnel, drug inventory and stocking, and patient satisfaction and health promotion domains of chain pharmacies were significantly higher than those of independent pharmacies (p pharmacies and chain pharmacies in the premise and facility or dispensing and patient care domains. Conclusion Quality indicators developed by the Community Pharmacy Association (Thailand) could be used to assess quality of practice in pharmacies in routine settings. It is revealed that the quality scores of chain pharmacies were higher than those of independent pharmacies.

  16. Comparing Public Quality Ratings for Accredited and Nonaccredited Nursing Homes.

    Science.gov (United States)

    Williams, Scott C; Morton, David J; Braun, Barbara I; Longo, Beth Ann; Baker, David W

    2017-01-01

    Compare quality ratings of accredited and nonaccredited nursing homes using the publicly available Centers for Medicare and Medicaid Services (CMS) Nursing Home Compare data set. This cross-sectional study compared the performance of 711 Joint Commission-accredited (TJC-accredited) nursing homes (81 of which also had Post-Acute Care Certification) to 14,926 non-Joint Commission-accredited (non-TJC-accredited) facilities using the Nursing Home Compare data set (as downloaded on April 2015). Measures included the overall Five-Star Quality Rating and its 4 components (health inspection, quality measures, staffing, and RN staffing), the 18 Nursing Home Compare quality measures (5 short-stay measures, 13 long-stay measures), as well as inspection deficiencies, fines, and payment denials. t tests were used to assess differences in rates for TJC-accredited nursing homes versus non-TJC-accredited nursing homes for quality measures, ratings, and fine amounts. Analysis of variance models were used to determine differences in rates using Joint Commission accreditation status, nursing home size based on number of beds, and ownership type. An additional model with an interaction term using Joint Commission accreditation status and Joint Commission Post-Acute Care Certification status was used to determine differences in rates for Post-Acute Care Certified nursing homes. Binary variables (eg, deficiency type, fines, and payment denials) were evaluated using a logistic regression model with the same covariates. After controlling for the influences of facility size and ownership type, TJC-accredited nursing homes had significantly higher star ratings than non-TJC-accredited nursing homes on each of the star rating component subscales (P homes with Post-Acute Care Certification performed statistically better on the overall star rating, as well as 3 of the 4 subscales (P homes had statistically fewer deficiencies than non-TJC-accredited nursing homes (P payment denials (P homes

  17. Shaping performance: do international accreditations and quality management really help?

    OpenAIRE

    Nigsch, Stefano; Schenker-Wicki, Andrea

    2012-01-01

    In recent years, international accreditations from private providers have gained importance among business schools all over the world. Higher education managers increasingly see these accreditations as a way of assuring and developing quality in order to comply with international standards, enhance performance, and increase reputation. However, given that an accreditation process requires a great deal of resources and that it might increase bureaucratization and control, international accredi...

  18. The DOE Laboratory Accreditation Program 8 years later

    International Nuclear Information System (INIS)

    Cummings, R.; Kershisnik, R.; Taylor, T.; Grothaus, G.; Loesch, R.M.

    1994-01-01

    The DOE Laboratory Accreditation Program was implemented in 1986. Currently, the program is conducting its seventeenth performance testing session for whole body personnel dosimeters. All but two DOE laboratories have gained accreditation for their whole body personnel dosimetry systems. Several test situations which were anticipated in the early stages of DOELAP have not materialized. In addition, the testing standard for whole body personnel dosimetry systems is under review and revision. In the near future, the accreditation programs for extremity dosimetry and bioassay will be implemented. This presentation summarizes the status and anticipated direction of the DOE whole body and extremity dosimetry and bioassay laboratory accreditation program

  19. Accreditation and participatory design in the healthcare sector

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Scheuer, John Damm; Hertzum, Morten

    2015-01-01

    , realizing, and measuring the effects from using an information technology. This approach aligns with much of the logic in accreditation but is distinguished by its focus on effects, whereas current accreditation approaches focus on processes. Thereby, effects-driven IT development might support challenging...... parts of the accreditation process and fit well with clinical evidence-based thinking. We describe and compare effects-driven IT development with accreditation, in terms of the Danish Quality Model which is used throughout the Danish healthcare sector, and we discuss the prospects and challenges...

  20. A Perspective on the Accreditation of Nontraditional Higher Education.

    Science.gov (United States)

    Andrews, Grover; Harris, John

    1979-01-01

    The nontraditional education movement in postsecondary education has presented new problems for accreditation in terms of results vs process, governance, the rise of entrepreneurs, and territoriality. (JMF)

  1. CIEMAT external dosimetry service: ISO/IEC 17025 accreditation and 3 y of operational experience as an accredited laboratory

    International Nuclear Information System (INIS)

    Romero, A.M.; Rodriguez, R.; Lopez, J.L.; Martin, R.; Benavente, J.F.

    2016-01-01

    In 2008, the CIEMAT Radiation Dosimetry Service decided to implement a quality management system, in accordance with established requirements, in order to achieve ISO/IEC 17025 accreditation. Although the Service comprises the approved individual monitoring services of both external and internal radiation, this paper is specific to the actions taken by the External Dosimetry Service, including personal and environmental dosimetry laboratories, to gain accreditation and the reflections of 3 y of operational experience as an accredited laboratory. (authors)

  2. How changing quality management influenced PGME accreditation: a focus on decentralization and quality improvement

    NARCIS (Netherlands)

    Akdemir, Nesibe; Lombarts, Kiki M. J. M. H.; Paternotte, Emma; Schreuder, Bas; Scheele, Fedde

    2017-01-01

    Background: Evaluating the quality of postgraduate medical education (PGME) programs through accreditation is common practice worldwide. Accreditation is shaped by educational quality and quality management. An appropriate accreditation design is important, as it may drive improvements in training.

  3. 75 FR 34148 - Voluntary Private Sector Accreditation and Certification Preparedness Program

    Science.gov (United States)

    2010-06-16

    ...] Voluntary Private Sector Accreditation and Certification Preparedness Program AGENCY: Federal Emergency...) announces its adoption of three standards for the Voluntary Private Sector Accreditation and Certification... DHS to develop and implement a Voluntary Private Sector Preparedness Accreditation and Certification...

  4. Nuclear medicine resources manual

    International Nuclear Information System (INIS)

    2006-02-01

    Over the past decade many IAEA programmes have significantly enhanced the capabilities of numerous Member States in the field of nuclear medicine. Functional imaging using nuclear medicine procedures has become an indispensable tool for the diagnosis, treatment planning and management of patients. However, due to the heterogeneous growth and development of nuclear medicine in the IAEA's Member States, the operating standards of practice vary considerably from country to country and region to region. This publication is the result of the work of over 30 international professionals who have assisted the IAEA in the process of standardization and harmonization. This manual sets out the prerequisites for the establishment of a nuclear medicine service, including basic infrastructure, suitable premises, reliable supply of electricity, maintenance of a steady temperature, dust exclusion for gamma cameras and radiopharmacy dispensaries. It offers clear guidance on human resources and training needs for medical doctors, technologists, radiopharmaceutical scientists, physicists and specialist nurses in the practice of nuclear medicine. The manual describes the requirements for safe preparation and quality control of radiopharmaceuticals. In addition, it contains essential requirements for maintenance of facilities and instruments, for radiation hygiene and for optimization of nuclear medicine operational performance with the use of working clinical protocols. The result is a comprehensive guide at an international level that contains practical suggestions based on the experience of professionals around the globe. This publication will be of interest to nuclear medicine physicians, radiologists, medical educationalists, diagnostic centre managers, medical physicists, medical technologists, radiopharmacists, specialist nurses, clinical scientists and those engaged in quality assurance and control systems in public health in both developed and developing countries

  5. Manual of radioisotope production

    International Nuclear Information System (INIS)

    1966-01-01

    The Manual of Radioisotope Production has been compiled primarily to help small reactor establishments which need a modest programme of radioisotope production for local requirements. It is not comprehensive, but gives guidance on essential preliminary considerations and problems that may be met in the early stages of production. References are included as an aid to the reader who wishes to seek further in the extensive literature on the subject. In preparing the Manual, which is in two parts, the Agency consulted several Member States which already have long experience in radioisotope production. An attempt has been made to condense this experience, firstly, by setting out the technical and economic considerations which govern the planning and execution of an isotope programme and, secondly, by providing experimental details of isotope production processes. Part I covers topics common to all radioisotope processing, namely, laboratory design, handling and dispensing of radioactive solutions, quality control, measurement and radiological safety. Part II contains information on the fifteen radioisotopes in most common use. These are bromine-82, cobalt-58, chromium-51, copper-64, fluorine-18, gold-198, iodine-131, iron-59, magnesium-28, potassium-42, sodium-24, phosphorus-32, sulphur-35, yttrium-90 and zinc-65. Their nuclear properties are described, references to typical applications are given and published methods of production are reviewed; also included are descriptions in detail of the production processes used at several national atomic energy organizations. No attempt has been made to distinguish the best values for nuclear data or to comment on the relative merits of production processes. Each process is presented essentially as it was described by the contributor on the understanding that critical comparisons are not necessary for processes which have been well tried in practical production for many years. The information is presented as a guide to enable

  6. The comprehensive training in Colombian higher education

    Directory of Open Access Journals (Sweden)

    Rodolfo M. Posada Alvarez

    2014-03-01

    Full Text Available In this article the integral formation fundamental than action Under the new legislation and contemporary predicaments on education, knowledge and research education is analyzed. This training involves not only students but the entire university community, particularly teachers, whose reflective responsibility for their work should bring them to operate the pillars identified in education. Likewise Institutional factors that can ensure and strengthen the comprehensive training in higher education are analyzed: disciplinary integration, flexibility, innovation, leadership, participation, self-evaluation and accreditation.

  7. AACSB Accreditation in China--Current Situation, Problems, and Solutions

    Science.gov (United States)

    Zhang, Xinrui; Gao, Yan

    2012-01-01

    This paper first introduces the background of the AACSB (Association to Advance Collegiate Schools of Business) accreditation, and then analyzes the current status of the participation of Chinese business schools in AACSB accreditation. Based on the data analysis, the paper points out that there are two main problems in the Chinese business…

  8. Accreditation of Medical Education in China: Accomplishments and Challenges

    Science.gov (United States)

    Wang, Qing

    2014-01-01

    As an external review mechanism, accreditation has played a positive global role in quality assurance and promotion of educational reform. Accreditation systems for medical education have been developed in more than 100 countries including China. In the past decade, Chinese standards for basic medical education have been issued together with…

  9. Toward Trust: Recalibrating Accreditation Practices for Postsecondary Arts Education

    Science.gov (United States)

    Warburton, Edward C.

    2018-01-01

    This article charts the influence of American accreditation policies on postsecondary arts education practices. Some commentators suggest that accreditation is a standards- and evidence-based process. I argue that trust is at the center of concerns about assessment in higher education, especially in the arts. The purpose of this article is to…

  10. Accountability and Accreditation for Special Libraries: It Can Be Done!

    Science.gov (United States)

    Glockner, Brigitte

    2004-01-01

    Health librarians are very familiar with the accreditation process in hospitals. In 2000 the first ALIA National Policy Congress recommended that accreditation of special libraries should be implemented. The proposed guidelines have been roughly based on the EQuIP Program of the Australian Council on Healthcare Standards. This program is…

  11. 22 CFR 41.23 - Accredited officials in transit.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Accredited officials in transit. 41.23 Section... transit. An accredited official of a foreign government intending to proceed in immediate and continuous transit through the United States on official business for that government is entitled to the benefits of...

  12. Accreditation in the Profession of Psychology: A Cautionary Tale

    Science.gov (United States)

    Maiden, Robert; Knight, Bob G.; Howe, Judith L.; Kim, Seungyoun

    2012-01-01

    This article examines the history of accreditation in psychology and applies the lessons learned to the Association for Gerontology in Higher Education's (AGHE) consideration of forming an organization to accredit programs in gerontology. The authors identify the challenges met and unmet, the successes and failures, and the key issues that emerged…

  13. Accreditation of Gerontology Programs: A Look from Inside

    Science.gov (United States)

    Van Dussen, Daniel J.; Applebaum, Robert; Sterns, Harvey

    2012-01-01

    For over three decades, there has been considerable discussion about the development of gerontology education in the United States. A debate about accreditation is a logical outgrowth in this evolution. The dialogue about accreditation raises some important questions and gives gerontology an opportunity to further define itself. Accreditation…

  14. Reputation Cycles: The Value of Accreditation for Undergraduate Journalism Programs

    Science.gov (United States)

    Blom, Robin; Davenport, Lucinda D.; Bowe, Brian J.

    2012-01-01

    Accreditation is among various outside influences when developing an ideal journalism curriculum. The value of journalism accreditation standards for undergraduate programs has been studied and is still debated. This study discovers views of opinion leaders in U.S. journalism programs, as surveyed program directors give reasons for being…

  15. The CPA Exam as a Postcurriculum Accreditation Assessment

    Science.gov (United States)

    Barilla, Anthony G.; Jackson, Robert E.; Mooney, J. Lowell

    2008-01-01

    Business schools often attain accreditation to demonstrate program efficacy. J. A. Marts, J. D. Baker, and J. M. Garris (1988) hypothesized that candidates from Association to Advance Collegiate Schools of Business International (AACSB)-accredited accounting programs perform better on the CPA exam than do candidates from non-AACSB-accredited…

  16. Shaping Performance: Do International Accreditations and Quality Management Really Help?

    Science.gov (United States)

    Nigsch, Stefano; Schenker-Wicki, Andrea

    2013-01-01

    In recent years, international accreditations have become an important form of quality management for business schools all over the world. However, given their high costs and the risk of increasing bureaucratisation and control, accreditations remain highly disputed in academia. This paper uses quantitative data to assess whether accreditations…

  17. Balancing Stakeholders' Interests in Evolving Teacher Education Accreditation Contexts

    Science.gov (United States)

    Elliott, Alison

    2008-01-01

    While Australian teacher education programs have long had rigorous accreditation pathways at the University level they have not been subject to the same formal public or professional scrutiny typical of professions such as medicine, nursing or engineering. Professional accreditation for teacher preparation programs is relatively new and is linked…

  18. 9 CFR 77.35 - Interstate movement from accredited herds.

    Science.gov (United States)

    2010-01-01

    ... accredited herd. If a group of captive cervids from an accredited herd is being moved interstate together to... cervids is being moved together, the entire group must be isolated from all other livestock during the... from isolation; or (3) If the captive cervid to be added is not being moved directly from a classified...

  19. Accreditation of academic programmes in Nigerian universities: the ...

    African Journals Online (AJOL)

    ... emphasis on the library holdings, quantity and quality of materials and their currency. Other areas of the library that deserve the proper attention of the accreditation team are also highlighted. Keywords: academic, accreditation, library, Nigeria, programmes, universities. Lagos Journal of Library and Information Science ...

  20. 76 FR 5307 - Net Worth Standard for Accredited Investors

    Science.gov (United States)

    2011-01-31

    ... affected investors who do not fund capital calls or otherwise reinvest in future rounds of financing. \\41...-3144; IC-29572; File No. S7-04-11] RIN 3235-AK90 Net Worth Standard for Accredited Investors AGENCY... accredited investor standards in our rules under the Securities Act of 1933 to reflect the requirements of...

  1. Policy Priorities for Accreditation Put Quality College Learning at Risk

    Science.gov (United States)

    Schneider, Carol Geary

    2016-01-01

    Ensuring the quality of college learning is, beyond doubt, the most important responsibility of higher education accreditation. Yet, almost no one currently thinks that accreditation, especially at the institutional level, is what it should be for twenty-first-century students and institutions of higher education. In this article, the author…

  2. 75 FR 57658 - National Veterinary Accreditation Program; Correcting Amendment

    Science.gov (United States)

    2010-09-22

    ... [Docket No. APHIS-2006-0093] RIN 0579-AC04 National Veterinary Accreditation Program; Correcting Amendment..., Docket No. APHIS-2006-0093), and effective on February 1, 2010, we amended the National Veterinary... Veterinary Accreditation Program, VS, APHIS, 4700 River Road Unit 200, Riverdale, MD 20737; (301) 851-3401...

  3. Laboratory Accreditation and the Calibration of Radiologic Measuring Tools

    International Nuclear Information System (INIS)

    Vancsura, P.; Kovago, J.

    1998-01-01

    In this paper is presented that accreditation in our days is a strict requirement for a lab for its results could be accepted on international level. Accreditation itself brings to new requirements, among them some are related to the calibration of the radiological measuring equipment

  4. Increasing Institutional Effectiveness: A Continuous Effort after Accreditation.

    Science.gov (United States)

    Chen, HongYu

    West Virginia University at Parkersburg (WVUP) is a separately accredited campus of the University offering 2 baccalaureate, 10 associate, and 2 certificate programs. In response to concerns raised in a recent accreditation report, WVUP conducted a study examining student attitudes toward facilities, course scheduling, student advising,…

  5. Ethics Education in CACREP-Accredited Counselor Education Programs

    Science.gov (United States)

    Urofsky, Robert; Sowa, Claudia

    2004-01-01

    The authors present the results of a survey investigating ethics education practices in counselor education programs accredited by the Council for Accreditation of Counseling and Related Educational Programs and counselor educators' beliefs regarding ethics education. Survey responses describe current curricular approaches to ethics education,…

  6. NADE Accreditation: The Right Decision for the Current Time

    Science.gov (United States)

    NADE Digest, 2018

    2018-01-01

    The National Association for Developmental Education (NADE) Accreditation process is more relevant and important than ever to the discussion of students' success and completion of meaningful credentials. In the current politically-charged climate, NADE Accreditation helps programs demonstrate not only to themselves and their administrations, but…

  7. AACSB Accreditation and Possible Unintended Consequences: A Deming View

    Science.gov (United States)

    Stepanovich, Paul; Mueller, James; Benson, Dan

    2014-01-01

    The AACSB accreditation process reflects basic quality principles, providing standards and a process for feedback for continuous improvement. However, implementation can lead to unintended negative consequences. The literature shows that while institutionalism and critical theory have been used as a theoretical base for evaluating accreditation,…

  8. The impact of an accreditation system on the quality of undergraduate medical education in Saudi Arabia

    OpenAIRE

    Alrebish, Saleh Ali

    2017-01-01

    The accreditation of undergraduate medical education is a universal undertaking. Despite the widespread adoption of accreditation processes and an increasing focus on accreditation as a mechanism to ensure minimum standards are met in various fields, there is little evidence to support the effectiveness of accreditation. The new accreditation body in Saudi Arabia, the National Commission for Academic Accreditation and Assessment (NCAAA), is viewed anecdotally as a positive development; howeve...

  9. Health Physics Society program for accreditation of calibration laboratories

    International Nuclear Information System (INIS)

    West, L.; Masse, F.X.; Swinth, K.L.

    1988-01-01

    The Health Physics Society has instituted a new program for accreditation of organizations that calibrate radiation survey instruments. The purpose of the program is to provide radiation protection professionals with an expanded means of direct and indirect access to national standards, thus introducing a means for improving the uniformity, accuracy, and quality of ionizing radiation field measurements. Secondary accredited laboratories are expected to provide a regional support basis. Tertiary accredited laboratories are expected to operate on a more local basis and provide readily available expertise to end users. The accreditation process is an effort to provide better measurement assurance for surveys of radiation fields. The status of the accreditation program, general criteria, gamma-ray calibration criteria, and x-ray calibration criteria are reviewed

  10. Current status of accreditation for drug testing in hair.

    Science.gov (United States)

    Cooper, Gail; Moeller, Manfred; Kronstrand, Robert

    2008-03-21

    At the annual meeting of the Society of Hair Testing in Vadstena, Sweden in 2006, a committee was appointed to address the issue of guidelines for hair testing and to assess the current status of accreditation amongst laboratories offering drug testing in hair. A short questionnaire was circulated amongst the membership and interested parties. Fifty-two responses were received from hair testing laboratories providing details on the amount and type of hair tests they offered and the status of accreditation within their facilities. Although the vast majority of laboratories follow current guidelines (83%), only nine laboratories were accredited to ISO/IEC 17025 for hair testing. A significant number of laboratories reporting that they were in the process of developing quality systems with a view to accrediting their methods within 2-3 years. This study provides an insight into the status of accreditation in hair testing laboratories and supports the need for guidelines to encourage best practice.

  11. Changes in management actions after the Hospital Accreditation

    Directory of Open Access Journals (Sweden)

    Andréia Guerra Siman

    2016-01-01

    Full Text Available Objective: to understand the changes in the management actions after the Hospital Accreditation. Methods: a case study. The study included 12 managers of a hospital accredited with excellence. Data collection was carried out with interviews with semi-structured and subjected to content analysis. Results: about changes in management actions were recorded significantly three categories: Work organization with quality tools; management actions before and after the accreditation; and challenges faced by modifying the management actions. Conclusion: accreditation mobilized changes in management actions with quality instruments of adoption used to organize the work and accountability of those involved in the process. However, there were challenges to be overcome to achieve accreditation by managers.

  12. Accreditation and the Development of Process Performance Measures

    DEFF Research Database (Denmark)

    Bie Bogh, Søren

    Accreditation is an external review process used to assess how well an organisation performs relative to established standards. Accreditation provides a framework for continuous quality improvement, and health services worldwide embrace accreditation and use it as a strategy to improve quality...... on quality of care using nationwide quantitative designs aimed at detecting changes over time in hospital performance in relation to both voluntary (Study 1) and mandatory accreditation (Study 2). Further, a qualitative study (Study 3) was conducted to complement the findings in Study 2. To examine...... was used to examine the mandatory accreditation programme. The quantitative study was a multilevel, longitudinal, stepped-wedge, nationwide study of process performance measures based on data from patients admitted for acute stroke, heart failure, ulcer, diabetes, breast cancer and lung cancer...

  13. PAVECHECK : training material updated user's manual including GPS.

    Science.gov (United States)

    2009-01-01

    PAVECHECK is a software package used to integrate nondestructive test data from various testing systems to provide the pavement engineer with a comprehensive evaluation of both surface and subsurface conditions. This User's Manual is intended to demo...

  14. Manual for reactor produced radioisotopes

    International Nuclear Information System (INIS)

    2003-01-01

    Radioisotopes find extensive applications in several fields including medicine, industry, agriculture and research. Radioisotope production to service different sectors of economic significance constitutes an important ongoing activity of many national nuclear programmes. Radioisotopes, formed by nuclear reactions on targets in a reactor or cyclotron, require further processing in almost all cases to obtain them in a form suitable for use. Specifications for final products and testing procedures for ensuring quality are also an essential part of a radioisotope production programme. The International Atomic Energy Agency (IAEA) has compiled and published such information before for the benefit of laboratories of Member States. The first compilation, entitled Manual of Radioisotope Production, was published in 1966 (Technical Reports Series No. 63). A more elaborate and comprehensive compilation, entitled Radioisotope Production and Quality Control, was published in 1971 (Technical Reports Series No. 128). Both served as useful reference sources for scientists working in radioisotope production worldwide. The 1971 publication has been out of print for quite some time. The IAEA convened a consultants meeting to consider the need for compiling an updated manual. The consultants recommended the publication of an updated manual taking the following into consideration: significant changes have taken place since 1971 in many aspects of radioisotope production; many radioisotopes have been newly introduced while many others have become gradually obsolete; considerable experience and knowledge have been gained in production of important radioisotopes over the years, which can be preserved through compilation of the manual; there is still a need for a comprehensive manual on radioisotope production methods for new entrants to the field, and as a reference. It was also felt that updating all the subjects covered in the 1971 manual at a time may not be practical considering the

  15. The effect of dual accreditation on family medicine residency programs.

    Science.gov (United States)

    Mims, Lisa D; Bressler, Lindsey C; Wannamaker, Louise R; Carek, Peter J

    2015-04-01

    In 1985, the American Osteopathic Association (AOA) Board of Trustees agreed to allow residency programs to become dually accredited by the AOA and Accreditation Council for Graduate Medical Education (ACGME). Despite the increase in such programs, there has been minimal research comparing these programs to exclusively ACGME-accredited residencies. This study examines the association between dual accreditation and suggested markers of quality. Standard characteristics such as regional location, program structure (community or university based), postgraduate year one (PGY-1) positions offered, and salary (PGY-1) were obtained for each residency program. In addition, the faculty to resident ratio in the family medicine clinic and the number of half days residents spent in the clinic each week were recorded. Initial Match rates and pass rates of new graduates on the ABFM examination from 2009 to 2013 were also obtained. Variables were analyzed using chi-square and Student's t test. Logistic regression models were then created to predict a program's 5-year aggregate initial Match rate and Board pass rate in the top tertile as compared to the lowest tertile. Dual accreditation was obtained by 117 (27.0%) of programs. Initial analyses revealed associations between dually accredited programs and mean year of initial ACGME program accreditation, regional location, program structure, tracks, and alternative medicine curriculum. When evaluated in logistic regression, dual accreditation status was not associated with Match rates or ABFM pass rates. By examining suggested markers of program quality for dually accredited programs in comparison to ACGME-only accredited programs, this study successfully established both differences and similarities among the two types.

  16. Employer's Manual on Affirmative Action in Employment.

    Science.gov (United States)

    Kentucky State Commission on Human Rights, Frankfort.

    The express purpose of this manual is for its use by business and industry in Kentucky as an aid to eliminate discrimination. Affirmative action is defined here as a comprehensive effort by an employer designed to: employ women and minority persons where they are under-utilized; include minority persons and women in all facets of the company's…

  17. TADS Needs Assessment Procedures Manual, Summer 1980.

    Science.gov (United States)

    Black, Talbot; And Others

    The TADS (Technical Assistance Development System) Needs Assessment Manual is designed to guide the comprehensive review of Handicapped Children's Early Education Program (HCEEP) demonstration projects in identifying technical assistance needs. An introduction reviews the TADS technical assistance model which includes program planning, needs…

  18. NJOY nuclear data processing system: user's manual

    International Nuclear Information System (INIS)

    MacFarlane, R.E.; Barrett, R.J.; Muir, D.W.; Boicourt, R.M.

    1978-12-01

    The NJOY nuclear data processing system is a comprehensive computer code package for producing cross sections for neutron and photon transport calculations from ENDF/B-IV and -V evaluated nuclear data. This user's manual provides a concise description of the code, input instructions, sample problems, and installation instructions. 1 figure, 3 tables

  19. Does Accreditation Matter? School Readiness Rates for Accredited versus Nonaccredited Child Care Facilities in Florida's Voluntary Pre-Kindergarten Program

    Science.gov (United States)

    Winterbottom, Christian; Piasta, Shayne B.

    2015-01-01

    Accreditation is a widely accepted indicator of quality in early education and includes many of the components cited in broad conceptualizations of quality. The purpose of this study was to examine whether kindergarten readiness rates differed between Florida child care facilities that were and were not accredited by any relevant national…

  20. A Manual of Style.

    Science.gov (United States)

    Nebraska State Dept. of Education, Lincoln.

    This "Manual of Style" is offered as a guide to assist Nebraska State employees in producing quality written communications and in presenting a consistently professional image of government documents. The manual is not designed to be all-inclusive. Sections of the manual discuss formatting documents, memorandums, letters, mailing…

  1. Sierra/SM theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Crane, Nathan Karl

    2013-07-01

    Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilites come closer to production level.

  2. A National Perspective on Exploring Correlates of Accreditation in Children's Mental Health Care.

    Science.gov (United States)

    Lee, Madeline Y

    2017-07-01

    This study is the first to explore national accreditation rates and the relationship between accreditation status and organizational characteristics and quality indicators in children's mental health. Data from the Substance Abuse and Mental Health Services Administration's (SAMHSA's) National Survey of Mental Health Treatment Facilities (NSMHTF) were used from 8,247 facilities that serve children and/or adolescents. Nearly 60% (n=4,925) of the facilities were accredited by the Council on Accreditation (COA), the Commission on Accreditation of Rehabilitation Facilities (CARF), or The Joint Commission (TJC). Chi-square analyses were conducted to explore relationships. Compared to non-accredited facilities, more accredited facilities reported greater number of admissions, acceptance of government funding and client funds, and implementation of several quality indicators. Policies with incentives for accreditation could influence accreditation rates, and accreditation could influence quality indicators. These results set the foundation for future research about the drivers of the accreditation phenomenon and its impact on children's mental health outcomes.

  3. Measuring up to the challenges of the 21st century. An international evaluation of the Centre for Metrology and Accreditation

    Energy Technology Data Exchange (ETDEWEB)

    Clapman, P.; Kaarls, R.; Temmes, M.

    1997-04-01

    The international evaluation of the Centre for Metrology and Accreditation (MIKES) is part of the process in which all relevant industrial and technology policy measures and organizations under the auspices of the Ministry of Trade and Industry (MTI) are being evaluated with the aim of improving their effectiveness. The overall conclusion of the evaluation is that MIKES is serving the country well. An effective national measurement system (FINMET) is being maintained which provides a wide range of calibration services covering most of the nation`s needs. The accreditation service (FINAS) is now well established, is operating effectively, and has good prospects for growth. The evaluators present, however, a number of proposals (including 33 specific recommendations) where they feel that the metrology and accreditation arrangements could be better-suited to meet future national and international challenges. According to the recommendations the Finnish quality policy framework should be developed in a consistent way. There is a need of a comprehensive governmental quality policy statement upon which the inter-ministry coordination and harmonization of various conformity assessment activities can be based. MIKES should retain its current status as an agency within MTI. The national measurement system should be more centralised and a new purpose-built national standards laboratory should be procured. The responsibility for legal metrology should be transferred to MIKES. The terms of reference and membership of Advisory Committee for Metrology, as well as the Advisory Committee for Accreditation should be revised to ensure wider representation of all relevant, and especially industrial interests

  4. Photovoltaic module certification/laboratory accreditation criteria development

    Energy Technology Data Exchange (ETDEWEB)

    Osterwald, C.R. [National Renewable Energy Lab., Golden, CO (United States); Hammond, R.L.; Wood, B.D.; Backus, C.E.; Sears, R.L. [Arizona State Univ., Tempe, AZ (United States); Zerlaut, G.A. [SC-International Inc., Phoenix, AZ (United States); D`Aiello, R.V. [RD Associates, Tempe, AZ (United States)

    1995-04-01

    This document provides an overview of the structure and function of typical product certification/laboratory accreditation programs. The overview is followed by a model program which could serve as the basis for a photovoltaic (PV) module certification/laboratory accreditation program. The model covers quality assurance procedures for the testing laboratory and manufacturer, third-party certification and labeling, and testing requirements (performance and reliability). A 30-member Criteria Development Committee was established to guide, review, and reach a majority consensus regarding criteria for a PV certification/laboratory accreditation program. Committee members represented PV manufacturers, end users, standards and codes organizations, and testing laboratories.

  5. Accreditation experience of radioisotope metrology laboratory of Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Iglicki, A. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina)]. E-mail: iglicki@cae.cnea.gov.ar; Mila, M.I. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina)]. E-mail: mila@cae.cnea.gov.ar; Furnari, J.C. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina); Arenillas, P. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina); Cerutti, G. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina); Carballido, M. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina); Guillen, V. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina); Araya, X. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina); Bianchini, R. [Laboratorio de Metrologia de Radioisotopos, Comision Nacional de Energia Atomica (Argentina)

    2006-10-15

    This work presents the experience developed by the Radioisotope Metrology Laboratory (LMR), of the Argentine National Atomic Energy Commission (CNEA), as result of the accreditation process of the Quality System by ISO 17025 Standard. Considering the LMR as a calibration laboratory, services of secondary activity determinations and calibration of activimeters used in Nuclear Medicine were accredited. A peer review of the ({alpha}/{beta})-{gamma} coincidence system was also carried out. This work shows in detail the structure of the quality system, the results of the accrediting audit and gives the number of non-conformities detected and of observations made which have all been resolved.

  6. Accreditation experience of radioisotope metrology laboratory of Argentina

    International Nuclear Information System (INIS)

    Iglicki, A.; Mila, M.I.; Furnari, J.C.; Arenillas, P.; Cerutti, G.; Carballido, M.; Guillen, V.; Araya, X.; Bianchini, R.

    2006-01-01

    This work presents the experience developed by the Radioisotope Metrology Laboratory (LMR), of the Argentine National Atomic Energy Commission (CNEA), as result of the accreditation process of the Quality System by ISO 17025 Standard. Considering the LMR as a calibration laboratory, services of secondary activity determinations and calibration of activimeters used in Nuclear Medicine were accredited. A peer review of the (α/β)-γ coincidence system was also carried out. This work shows in detail the structure of the quality system, the results of the accrediting audit and gives the number of non-conformities detected and of observations made which have all been resolved

  7. Onsite assessments for the Department of Energy Laboratory Accreditation Program

    International Nuclear Information System (INIS)

    McMahan, K.L.

    1992-01-01

    For Department of Energy (DOE) facilities, compliance with DOE Order 5480.11 became a requirement in January 1989. One of the requirements of this Order is that personal external dosimetry programs be accredited under the Department of Energy's Laboratory Accreditation Program (DOELAP) in Personnel Dosimetry. The accreditation process, from the facility's perspective, is two-fold: dosimeters must meet performance criteria in radiation categories appropriate for each facility, and personnel administering and carrying out the program must demonstrate good operating practices. The DOELAP onsite assessment is designed to provide an independent evaluation of the latter

  8. Management changes resulting from hospital accreditation.

    Science.gov (United States)

    Oliveira, João Lucas Campos de; Gabriel, Carmen Silvia; Fertonani, Hosanna Pattrig; Matsuda, Laura Misue

    2017-03-02

    to analyze managers and professionals' perceptions on the changes in hospital management deriving from accreditation. descriptive study with qualitative approach. The participants were five hospital quality managers and 91 other professionals from a wide range of professional categories, hierarchical levels and activity areas at four hospitals in the South of Brazil certified at different levels in the Brazilian accreditation system. They answered the question "Tell me about the management of this hospital before and after the Accreditation". The data were recorded, fully transcribed and transported to the software ATLAS.ti, version 7.1 for access and management. Then, thematic content analysis was applied within the reference framework of Avedis Donabedian's Evaluation in Health. one large family was apprehended, called "Management Changes Resulting from the Accreditation: perspectives of managers and professionals" and five codes, related to the management changes in the operational, structural, financial and cost; top hospital management and quality management domains. the management changes in the hospital organizations resulting from the Accreditation were broad, multifaceted and in line with the improvements of the service quality. analizar las percepciones de gestores y trabajadores sobre los cambios en la gestión hospitalaria resultantes de la Acreditación. estudio descriptivo con aproximación cualitativa. Participaron cinco gestores de calidad hospitalaria y otros 91 trabajadores de las más diversas categorías profesionales, niveles jerárquicos y áreas de actuación de cuatro hospitales del sur de Brasil certificados por la Acreditación nacional de diferentes niveles, que contestaron la pregunta "Cuéntame sobre la gestión de este hospital, antes y después de la Acreditación". Los datos fueron grabados, transcritos por completo y transportados para acceso y manoseo en el software ATLAS.ti, versión 7.1. A seguir, fue aplicado el análisis de

  9. Patient satisfaction at accredited antiretroviral treatment sites in the Gert Sibande District

    Directory of Open Access Journals (Sweden)

    Selente Bezuidenhout

    2014-11-01

    Aim: This study sought to explore and describe the general satisfaction or dissatisfaction of patients with accredited ART hospital sites at public health facilities in the Gert Sibande District, Mpumalanga and to identify factors contributing to either satisfaction or dissatisfaction. Setting: Six hospitals that initiated ART in the district, participated in the study. Method: The study was conducted using a sample of 300 patients. Proportional random sampling was used in selecting the number of patients from each facility. A structured interview with each participating patient was conducted using a standardised structured questionnaire. The first available required number of patients that complied with requirements from each of the six hospitals was selected for the interview. Descriptive statistics were used to analyse data and data with qualitative aspects were captured and categorised manually. Results: The major factors contributing to satisfaction included the availability of medicines and knowledge regarding how to take medication. Factors contributing to dissatisfaction on the part of the patients included confidentiality issues, long waiting periods, shortage of staff and dirty toilets. Conclusion: This study indicated general satisfaction with the ART-related services at the accredited ART hospital sites in the Gert Sibande District. Regular monitoring and evaluation are recommended.

  10. Does the accreditation of private dental practices work? Time to rethink how accreditation can improve patient safety.

    Science.gov (United States)

    Jean, Gillian

    2017-10-09

    Accreditation to demonstrate engagement with the National Safety and Quality Health Service Standards (Standards) is compulsory for most hospital and healthcare settings, but to date remains voluntary for private dental practices (PDPs). The regulatory framework governing the dental profession lacks a proactive element to drive improvements in quality and safety of care, and an accreditation scheme can strengthen existing regulation. The current model of accreditation operating in accordance with the Australian Health Service Safety and Quality Accreditation Scheme (Scheme) is based on the Standards, which were written for a hospital model of healthcare service. The majority of PDPs are small office-based businesses with clear leadership structure and employing six staff or fewer. The Scheme is overly bureaucratic given the simplicity of the PDP business model. This article considers whether accreditation has a proven track record of improving quality of service and offers opinions about how a more appropriate safety management program for PDPs may look. What is known about the topic? There has been minimal research about the impact of accreditation schemes in improving patient safety in PDP. What does this paper add? This paper proposes a redesign of the Scheme to make it more relevant to PDPs. The paper offers strategies to minimise duplication of purpose between accreditation and existing legislation; and to strengthen critical elements of accreditation to improve effects on patient safety. What are the implications for practitioners? A redesigned accreditation scheme will support dental practitioners to implement a quality assurance system with improved efficiency, reduced administrative burden, and optimised patient safety.

  11. 42 CFR 493.571 - Disclosure of accreditation, State and CMS validation inspection results.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Disclosure of accreditation, State and CMS... Program § 493.571 Disclosure of accreditation, State and CMS validation inspection results. (a) Accreditation organization inspection results. CMS may disclose accreditation organization inspection results to...

  12. 42 CFR 8.3 - Application for approval as an accreditation body.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Application for approval as an accreditation body... accreditation body. (a) Eligibility. Private nonprofit organizations or State governmental entities, or... an accreditation body. (b) Application for initial approval. Three copies of an accreditation body...

  13. Development of an in vitro laboratory manual for nuclear medicine technology students

    International Nuclear Information System (INIS)

    Meyers, A.

    1989-01-01

    This study evaluated existing in vitro education materials in qualitative and quantitative parameters that currently exist to educate potential clinicians of nationally accredited nuclear medicine programs. A review of over 300 articles, texts, and manuals pertaining to in vitro nuclear medicine procedures clearly demonstrated that no in vitro laboratory manual for undergraduate students presently exited. Every nuclear medicine program director in the United States was surveyed. They were asked for their overall philosophy in terms of developing an in vitro manual and requested to evaluate the significant of 22 general principles/concepts and 34 specific laboratory testing procedures. From the response to the survey, an in vitro nuclear medicine manual was created and appended to the study. The manual consists of lecture and study material, chapter reviews, and laboratory assignments and exercises

  14. CIEMAT EXTERNAL DOSIMETRY SERVICE: ISO/IEC 17025 ACCREDITATION AND 3 Y OF OPERATIONAL EXPERIENCE AS AN ACCREDITED LABORATORY.

    Science.gov (United States)

    Romero, A M; Rodríguez, R; López, J L; Martín, R; Benavente, J F

    2016-09-01

    In 2008, the CIEMAT Radiation Dosimetry Service decided to implement a quality management system, in accordance with established requirements, in order to achieve ISO/IEC 17025 accreditation. Although the Service comprises the approved individual monitoring services of both external and internal radiation, this paper is specific to the actions taken by the External Dosimetry Service, including personal and environmental dosimetry laboratories, to gain accreditation and the reflections of 3 y of operational experience as an accredited laboratory. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Quality assurance manual for the Department of Energy laboratory accreditation program for personnel dosimetry systems

    International Nuclear Information System (INIS)

    1987-02-01

    The overall purpose of this document is to establish a uniform approach to quality assurance. This will ensure that uniform, high-quality personnel dosimetry practices are followed by the participating testing laboratories. The document presents guidelines for calibrating and maintaining measurement and test equipment (M and TE), calibrating radiation fields, and subsequently irradiating and handling personnel dosimeters in laboratories involved in the DOE dosimetry systems testing program. Radiation energies for which the test procedures apply are photons with approximately 15 keV to 2 MeV, beta particles above 0.3 MeV, neutrons with approximately 1 keV to 2 MeV. 12 refs., 4 tabs

  16. Accreditation and improvement in process quality: A nationwide study

    DEFF Research Database (Denmark)

    Falstie-Jensen, Anne Mette; Johnsen, Søren Paaske; Bie Bogh, Søren

    Objectives: To examine the development in process quality related to stroke, heart failure and ulcer (bleeding and perforated) between accredited and non-accredited hospitals. Method: All Danish hospitals which treated patients with stroke or heart failure during 2004-2008 or treated patients......-level processes of care data was obtained from national population-based registries. The accredited and non-accredited hospitals were compared using 20 processes of care indicators reflecting hospital compliance with national clinical guidelines. The 20 indicators included seven indicators for stroke, seven...... indicators for heart failure, three indicators for bleeding ulcer and three indicators for perforated ulcer. The primary outcome was the composite fulfilment of process indicators. The secondary outcome was all-or-none, defined as the proportion of patients receiving 100 % of the recommended processes...

  17. Schools of Education: Legal and Political Issues of Accreditation

    Science.gov (United States)

    Koff, Robert H.; Florio, David H.

    1977-01-01

    A policy-making forum created to examine substantive issues related to the formulation of a national accreditation policy for schools of education will help sort out and accommodate differences in ideological positions. (Author)

  18. Insurance Regulation: The NAIC Accreditation Program Can be Improved

    National Research Council Canada - National Science Library

    DIngell, John

    2001-01-01

    ... environment of the insurance industry and insurance regulation. In addition, it has revised the way accreditation reviews are performed and scored and has improved training for members of review teams.

  19. Virginia Tech's Cook Counseling Center receives international counseling accreditation

    OpenAIRE

    DeLauder, Rachel

    2010-01-01

    The Virginia Tech Thomas E. Cook Counseling Center has been accredited by the International Association of Counseling Services, Inc., an organization of United States, Canadian, and Australian counseling agencies based in Alexandria, Va.

  20. Accreditation and Participatory Design in the Health-Care Sector

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Scheuer, John Damm; Hertzum, Morten

    2015-01-01

    We reconsider the role of participatory design approaches emphasizing the current context of the accreditation regime imposed on the Danish healthcare sector. We describe effects-driven IT development as an instrument supporting sustained participatory design. Effects-driven IT development includes...... specifying, realizing, and measuring effects from using an information technology. This approach aligns with much of the logic inherent in accreditation and it supports challenging parts of the accreditation process. Effects-driven IT development furthermore might support effects related to clinical evidence......-based thinking. We describe and compare effects- driven IT development with accreditation and discuss the prospects and challenges for this approach to participatory design within the healthcare domain....

  1. Quality assurance and accreditation of engineering education in Jordan

    Science.gov (United States)

    Aqlan, Faisal; Al-Araidah, Omar; Al-Hawari, Tarek

    2010-06-01

    This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the efforts undertaken by the faculty of engineering at JUST concerning quality assurance and accreditation. Three engineering departments were accorded substantial equivalency status by the Accreditation Board of Engineering and Technology in 2009. Various measures of quality improvement, including curricula development, laboratories improvement, computer facilities, e-learning, and other supporting services are also discussed. Further assessment of the current situation is made through two surveys, targeting engineering instructors and students. Finally, the paper draws conclusions and proposes recommendations to enhance the quality of engineering education at JUST and other Jordanian educational institutions.

  2. CSTEM User Manual

    Science.gov (United States)

    Hartle, M.; McKnight, R. L.

    2000-01-01

    This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

  3. Accreditation ISO/IEC 1705 in dosimetry: Experience and results

    International Nuclear Information System (INIS)

    Martin Garcia, R.; Navarro Bravo, T.

    2013-01-01

    The objective of this work is to present the experience in the process of accreditation of the radiation dosimetry service in which there are trials for the determination of radiation doses due to internal and external exhibitions. Is They describe the aspects that were considered for the design and development of a system of quality and results after its implementation. A review of the benefits accreditation has been reported to the organization is finally made. (Author)

  4. Extending the accredited low flow liquid calibration range

    NARCIS (Netherlands)

    Platenkamp, Tom; Lötters, Joost Conrad

    2017-01-01

    There is an increasing demand for ISO/IEC 17025:2005 accredited liquid flow calibrations in the range of 1 g/h to 30 kg/h. The accredited Low Flow liquid Calibration Setup [1] (LFCS) at Bronkhorst® covers a flow range of 1 to 200 g/h, leaving a traceability gap in the flow range of 0.2 to 30 kg/h.

  5. Training and accreditation for radon professionals in Sweden

    International Nuclear Information System (INIS)

    Mjoenes, L.; Soederman, A.-L.

    2004-01-01

    Radon training courses and seminars on radon have been arranged in Sweden since the early 1980s. A commercial educational company initiated the first regular training courses in 1987. Up to 1990 about 400 persons had attended courses in radon measurement and radon mitigation methods. In 1991 the training programme was taken over by the Swedish Radiation Protection Authority, SSI. Today SSI's Radon Training Programme comprises three different two-day courses, a Basic Radon Course and two continuation courses: Radon Measurements and Radon in Water. Until 2003 SSI also arranged courses about Radon Remedial Measures and Radon Investigation and Risk Map Production. The courses are arranged twice a year. Altogether, about 750 municipal environmental health officers and technicians from private companies have been educated in the SSI training programme between 1991 and 2003. The continuation courses are completed with an examination, consisting of a theoretical test. The names of the persons who pass are being published in a list that is found on the SSI web site. Since no certification system is currently in place for radon professionals in Sweden, this list helps people who need to get in contact with radon counsellors to find one in their area and is used by authorities as well as private house-owners. Since 1991 it has been possible to obtain accreditation for measurements of indoor radon in Sweden and since 1997, also for measurements of radon in water. Although accreditation is voluntary in Sweden, accredited laboratories perform most measurements, both for indoor air and water. Passing the examination in the SSI training courses is a condition for accreditation. The Swedish Board for Accreditation and Conformity Assessment, SWEDAC, is in charge of the accreditation. So far, three major companies have obtained accreditation for measurement of indoor radon and four have been accredited for measurements of radon in water

  6. System Management on Accreditation Test for Radioactive Material

    International Nuclear Information System (INIS)

    Sohn, S. C.; Kim, Y. B.; Kim, H.W.

    2009-01-01

    The nuclear analytical service was conducted for the determination of nuclear speciation, isotope ratio, elemental analysis, and nuclear analysis in about 184 samples. Their results were recorded as an accreditation report. In this research, the quality control through the verification of uncertainty and confidence was carried out by participation in mutual cross-comparison test administrated by international accreditation organization. The quality control for the analytical counting devices was also conducted using the standard references

  7. ISO 15189 Accreditation: Navigation Between Quality Management and Patient Safety

    Directory of Open Access Journals (Sweden)

    Plebani Mario

    2017-09-01

    Full Text Available Accreditation is a valuable resource for clinical laboratories and the development of an International Standard for their accreditation represented a milestone on the path towards improved quality and safety in laboratory medicine. The recent revision of the International Standard, ISO 15189, has further strengthened its value not only for improving the quality system of a clinical laboratory but also for better answering the request for competence, focus on customers’ needs and ultimate value of laboratory services. Although in some countries more general standards such as ISO 9001 for quality systems or ISO 17025 for testing laboratories are still used, there is increasing recognition of the value of ISO 15189 as the most appropriate and useful standard for the accreditation of medical laboratories. In fact, only this International Standard recognizes the importance of all steps of the total testing process, namely extra-analytical phases, the need to focus on technical competence in addition to quality systems, and the focus on customers’ needs. However, the number of accredited laboratories largely varies between European countries and also major differences affect the approaches to accreditation promoted by the national bodies. In particular, some national accreditation bodies perpetuate the use of fixed scopes, while the European co-operation for accreditation (EA and the European Federation of Laboratory Medicine (EFLM Working Group promote the use of flexible scopes. Major issues in clinical laboratory accreditation are the verification of examination procedures for imprecision, trueness and diagnostic accuracy and for estimating measurement uncertainty. In addition, quality indicators (QIs are a fundamental requirement of the ISO 15189 International Standard.

  8. Quality improvement and accreditation readiness in state public health agencies.

    Science.gov (United States)

    Madamala, Kusuma; Sellers, Katie; Beitsch, Leslie M; Pearsol, Jim; Jarris, Paul

    2012-01-01

    There were 3 specific objectives of this study. The first objective was to examine the progress of state/territorial health assessment, health improvement planning, performance management, and quality improvement (QI) activities at state/territorial health agencies and compare findings to the 2007 findings when available. A second objective was to examine respondent interest and readiness for national voluntary accreditation. A final objective was to explore organizational factors (eg, leadership and capacity) that may influence QI or accreditation readiness. Cross-sectional study. State and Territorial Public Health Agencies. Survey respondents were organizational leaders at State and Territorial Public Health Agencies. Sixty-seven percent of respondents reported having a formal performance management process in place. Approximately 77% of respondents reported a QI process in place. Seventy-three percent of respondents agreed or strongly agreed that they would seek accreditation and 36% agreed or strongly agreed that they would seek accreditation in the first 2 years of the program. In terms of accreditation prerequisites, a strategic plan was most frequently developed, followed by a state/territorial health assessment and health improvement plan, respectively. Advancements in the practice and applied research of QI in state public health agencies are necessary steps for improving performance. In particular, strengthening the measurement of the QI construct is essential for meaningfully assessing current practice patterns and informing future programming and policy decisions. Continued QI training and technical assistance to agency staff and leadership is also critical. Accreditation may be the pivotal factor to strengthen both QI practice and research. Respondent interest in seeking accreditation may indicate the perceived value of accreditation to the agency.

  9. Accreditation of physicist in radiotherapy-past, present and future

    International Nuclear Information System (INIS)

    Howlett, S.

    2010-01-01

    Full text: Accreditation of medical physicists for clinical radiotherapy practice was commenced by the ACPSEM in 1988 by a group of experienced physicists interested in setting a benchmark of international standard by which to assess practising radiotherapy physicists. It is a voluntary, peer based examination process and leads to the award of Accreditation in Radiotherapy Equipment Commissioning and Quality Assurance (ARECQA). The responsible body within the ACPSEM is the Radiation Oncology Accreditation Panel (ROAP) under the umbrella of the Professional Standards Board(PSB). Over 130 physicists in Australia and New Zealand have been awarded ARECQA and it has been recognised by the radiotherapy professions and government bodies as a desirable and sometimes required, standard of qualification. With the implementation of the Training, Education and Accreditation Program (TEAP) by ACPSEM in 2003, a new Accreditation in Radiation Oncology Medical Physics (AROMP) was established in 2005. ARECQA will cease taking applications from experienced physicists on December 31st 2012 and only the AROMP pathway will be available. An external review of TEAP funded by the Commonwealth Government Department of Health and Ageing (DoHA), which is not yet publicly released, will have implications for AROMP in the future. This talk will review the development and progress of accreditation in radiation oncology medical physics in Australia and New Zealand, its place in the delivery of quality patient care, the relationship to ACPSEM registration, the current situation and future directions. (author)

  10. [Effects of the ISO 15189 accreditation on Nagoya University Hospital].

    Science.gov (United States)

    Yoshiko, Kenichi

    2012-07-01

    The Department of Clinical Laboratory, Nagoya University Hospital acquired ISO 15189 accreditation in November, 2009. The operation of our Quality Management System (QMS) was first surveyed in October, 2010. In this paper, we reported the activity for the preparation and operation of our QMS and the effects of ISO 15189 accreditation. We investigated the changes in the number and content on nonconformities, incident reports and complaints before and after accreditation as indicators to evaluate the effect of ISO 15189 accreditation. Post accreditation, the number of nonconformities and incident reports decreased, seeming to show an improvement of quality of the laboratory activity; however, the number of complaints increased. We identified the increase of complaints at the phlebotomy station. There had been some problems with blood sampling in the past, but it seemed that staff had a high level of concern regarding these problems at the phlebotomy station and took appropriate measures to resolve the complaints. We confirmed that the ISO 15189 accreditation was instrumental in the improvements of the safety and efficiency on laboratory works. However there was a problem that increase of overtime works to operate the QMS. We deal with development of a laboratory management system using IT recourses to solve the problem.

  11. The pathology milestones and the next accreditation system.

    Science.gov (United States)

    Naritoku, Wesley Y; Alexander, C Bruce; Bennett, Betsy D; Black-Schaffer, W Stephen; Brissette, Mark D; Grimes, Margaret M; Hoffman, Robert D; Hunt, Jennifer L; Iezzoni, Julia C; Johnson, Rebecca; Kozel, Jessica; Mendoza, Ricardo M; Post, Miriam D; Powell, Suzanne Z; Procop, Gary W; Steinberg, Jacob J; Thorsen, Linda M; Nestler, Steven P

    2014-03-01

    In the late 1990s, the Accreditation Council for Graduate Medical Education developed the Outcomes Project and the 6 general competencies with the intent to improve the outcome of graduate medical education in the United States. The competencies were used as the basis for developing learning goals and objectives and tools to evaluate residents' performance. By the mid-2000s the stakeholders in resident education and the general public felt that the Outcomes Project had fallen short of expectations. To develop a new evaluation method to track trainee progress throughout residency using benchmarks called milestones. A change in leadership at the Accreditation Council for Graduate Medical Education brought a new vision for the accreditation of training programs and a radically different approach to the evaluation of residents. The Pathology Milestones Working Group reviewed examples of developing milestones in other specialties, the literature, and the Accreditation Council for Graduate Medical Education program requirements for pathology to develop pathology milestones. The pathology milestones are a set of objective descriptors for measuring progress in the development of competency in patient care, procedural skill sets, medical knowledge, practice-based learning and improvement, interpersonal and communication skills, professionalism, and systems-based practice. The milestones provide a national standard for evaluation that will be used for the assessment of all residents in Accreditation Council for Graduate Medical Education-accredited pathology training programs.

  12. Accreditation of Medical Laboratories – System, Process, Benefits for Labs

    Directory of Open Access Journals (Sweden)

    Zima Tomáš

    2017-09-01

    Full Text Available One and key of the priorities in laboratory medicine is improvement of quality management system for patient safety. Quality in the health care is tightly connected to the level of excellence of the health care provided in relation to the current level of knowledge and technical development. Accreditation is an effective way to demonstrate competence of the laboratory, a tool to recognize laboratories world-wide, is linked to periodical audits, to stimulate the maintenance and improvement of the quality, which leads to high standard of services for clients (patients, health care providers, etc.. The strategic plans of IFCC and EFLM include focusing on accreditation of labs based on ISO standards and cooperation with European Accreditation and national accreditation bodies. IFCC and EFLM recognised that ISO 15189:2012 Medical laboratories – Requirements for quality and competence, encompasses all the assessment criteria specified in the policy of quality. The last version is oriented to process approach with detailed division and clearly defined requirements. The accreditation of labs improves facilitation of accurate and rapid diagnostics, efficiency of treatment and reduction of errors in the laboratory process. Accreditation is not about who the best is, but who has a system of standard procedures with aim to improve the quality and patient safety. Quality system is about people, with people and for people.

  13. Accreditation of laboratories in the field of radiation protection

    International Nuclear Information System (INIS)

    Galjanic, S.; Franic, Z.

    2005-01-01

    This paper gives a review of requirements and procedures for the accreditation of test and calibration laboratories in the field of radiation protection, paying particular attention to Croatia. General requirements to be met by a testing or calibration laboratory to be accredited are described in the standard HRN EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories. The quality of a radiation protection programme can only be as good as the quality of the measurements made to support it. Measurement quality can be assured by participation in measurement assurance programmes that evaluate the appropriateness of procedures, facilities, and equipment and include periodic checks to assure adequate performance. These also include internal consistency checks, proficiency tests, intercomparisons and site visits by technical experts to review operations. In Croatia, laboratories are yet to be accredited in the field of radiation protection. However, harmonisation of technical legislation with the EU legal system will require some changes in laws and regulations in the field of radiation protection, including the ones dealing with the notification of testing laboratories and connected procedures. Regarding the notification procedures for testing laboratories in Croatia, in the regulated area, the existing accreditation infrastructure, i.e. Croatian Accreditation Agency is ready for its implementation, as it has already established and further developed a consistent accreditation system, compatible with international requirements and procedures.(author)

  14. Radiological Control Manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  15. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-06-18

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  16. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-03-25

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  17. Radiological Control Manual

    International Nuclear Information System (INIS)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records

  18. HASL procedures manual

    International Nuclear Information System (INIS)

    Harley, J.H.

    1977-08-01

    Additions and corrections to the following sections of the HASL Procedures Manual are provided: General, Sampling, Field Measurements; General Analytical Chemistry, Chemical Procedures, Data Section, and Specifications

  19. PCs The Missing Manual

    CERN Document Server

    Karp, David

    2005-01-01

    Your vacuum comes with one. Even your blender comes with one. But your PC--something that costs a whole lot more and is likely to be used daily and for tasks of far greater importance and complexity--doesn't come with a printed manual. Thankfully, that's not a problem any longer: PCs: The Missing Manual explains everything you need to know about PCs, both inside and out, and how to keep them running smoothly and working the way you want them to work. A complete PC manual for both beginners and power users, PCs: The Missing Manual has something for everyone. PC novices will appreciate the una

  20. Evaluation of current Australian health service accreditation processes (ACCREDIT-CAP): protocol for a mixed-method research project.

    Science.gov (United States)

    Hinchcliff, Reece; Greenfield, David; Moldovan, Max; Pawsey, Marjorie; Mumford, Virginia; Westbrook, Johanna Irene; Braithwaite, Jeffrey

    2012-01-01

    Accreditation programmes aim to improve the quality and safety of health services, and have been widely implemented. However, there is conflicting evidence regarding the outcomes of existing programmes. The Accreditation Collaborative for the Conduct of Research, Evaluation and Designated Investigations through Teamwork-Current Accreditation Processes (ACCREDIT-CAP) project is designed to address key gaps in the literature by evaluating the current processes of three accreditation programmes used across Australian acute, primary and aged care services. The project comprises three mixed-method studies involving documentary analyses, surveys, focus groups and individual interviews. Study samples will comprise stakeholders from across the Australian healthcare system: accreditation agencies; federal and state government departments; consumer advocates; professional colleges and associations; and staff of acute, primary and aged care services. Sample sizes have been determined to ensure results allow robust conclusions. Qualitative information will be thematically analysed, supported by the use of textual grouping software. Quantitative data will be subjected to a variety of analytical procedures, including descriptive and comparative statistics. The results are designed to inform health system policy and planning decisions in Australia and internationally. The project has been approved by the University of New South Wales Human Research Ethics Committee (approval number HREC 10274). Results will be reported to partner organisations, healthcare consumers and other stakeholders via peer-reviewed publications, conference and seminar presentations, and a publicly accessible website.

  1. A Synthesis Model of Sustainable Market Orientation: Conceptualization, Measurement, and Influence on Academic Accreditation--A Case Study of Egyptian-Accredited Faculties

    Science.gov (United States)

    Abou-Warda, Sherein H.

    2014-01-01

    Higher education institutions are increasingly concerned about accreditation. Although sustainable market orientation (SMO) bears on academic accreditation, to date, no study has developed a valid scale of SMO or assessed its influence on accreditation. The purpose of this paper is to construct and validate an SMO scale that was developed in…

  2. Oil Spill Response Manual

    NARCIS (Netherlands)

    Marieke Zeinstra; Sandra Heins; Wierd Koops

    2014-01-01

    A two year programme has been carried out by the NHL University of Applied Sciences together with private companies in the field of oil and chemical spill response to finalize these manuals on oil and chemical spill response. These manuals give a good overview of all aspects of oil and chemical

  3. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  4. Eco-Innovation Manual

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.; Pigosso, Daniela Cristina Antelmi

    Aim of this manual is to introduce a methodology for the implementation of eco‐innovation within small and medium sized companies in developing and emerging economies. The intended audience of this manual is organizations that provide professional services to guide and support manufacturing compa...... companies to improve their sustainability performance....

  5. Marketing Research. Instructor's Manual.

    Science.gov (United States)

    Small Business Administration, Washington, DC.

    Prepared for the Administrative Management Course Program, this instructor's manual was developed to serve small-business management needs. The sections of the manual are as follows: (1) Lesson Plan--an outline of material covered, which may be used as a teaching guide, presented in two columns: the presentation, and a step-by-step indication of…

  6. Indoor Air Quality Manual.

    Science.gov (United States)

    Baldwin Union Free School District, NY.

    This manual identifies ways to improve a school's indoor air quality (IAQ) and discusses practical actions that can be carried out by school staff in managing air quality. The manual includes discussions of the many sources contributing to school indoor air pollution and the preventive planning for each including renovation and repair work,…

  7. GERTS GQ User's Manual.

    Science.gov (United States)

    Akiba, Y.; And Others

    This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

  8. CRISP instrument manual

    International Nuclear Information System (INIS)

    Bucknall, D.G.; Langridge, Sean

    1997-05-01

    This document is a user manual for CRISP, one of the two neutron reflectomers at ISIS. CRISP is highly automated allowing precision reproducible measurements. The manual provides detailed instructions for the setting-up and running of the instrument and advice on data analysis. (UK)

  9. Optimising Comprehensibility in Interlingual Translation

    DEFF Research Database (Denmark)

    Nisbeth Jensen, Matilde

    2015-01-01

    The increasing demand for citizen engagement in areas traditionally belonging exclusively to experts, such as health, law and technology has given rise to the necessity of making expert knowledge available to the general public through genres such as instruction manuals for consumer goods, patien...... the functional text type of Patient Information Leaflet. Finally, the usefulness of applying the principles of Plain Language and intralingual translation for optimising comprehensibility in interlingual translation is discussed....

  10. International Accreditation of ASME Codes and Standards

    International Nuclear Information System (INIS)

    Green, Mervin R.

    1989-01-01

    ASME established a Boiler Code Committee to develop rules for the design, fabrication and inspection of boilers. This year we recognize 75 years of that Code and will publish a history of that 75 years. The first Code and subsequent editions provided for a Code Symbol Stamp or mark which could be affixed by a manufacturer to a newly constructed product to certify that the manufacturer had designed, fabricated and had inspected it in accordance with Code requirements. The purpose of the ASME Mark is to identify those boilers that meet ASME Boiler and Pressure Vessel Code requirements. Through thousands of updates over the years, the Code has been revised to reflect technological advances and changing safety needs. Its scope has been broadened from boilers to include pressure vessels, nuclear components and systems. Proposed revisions to the Code are published for public review and comment four times per year and revisions and interpretations are published annually; it's a living and constantly evolving Code. You and your organizations are a vital part of the feedback system that keeps the Code alive. Because of this dynamic Code, we no longer have columns in newspapers listing boiler explosions. Nevertheless, it has been argued recently that ASME should go further in internationalizing its Code. Specifically, representatives of several countries, have suggested that ASME delegate to them responsibility for Code implementation within their national boundaries. The question is, thus, posed: Has the time come to franchise responsibility for administration of ASME's Code accreditation programs to foreign entities or, perhaps, 'institutes.' And if so, how should this be accomplished?

  11. MARS CODE MANUAL VOLUME III - Programmer's Manual

    International Nuclear Information System (INIS)

    Chung, Bub Dong; Hwang, Moon Kyu; Jeong, Jae Jun; Kim, Kyung Doo; Bae, Sung Won; Lee, Young Jin; Lee, Won Jae

    2010-02-01

    Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This programmer's manual provides a complete list of overall information of code structure and input/output function of MARS. In addition, brief descriptions for each subroutine and major variables used in MARS are also included in this report, so that this report would be very useful for the code maintenance. The overall structure of the manual is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

  12. Egyptian Mythological Manuals

    DEFF Research Database (Denmark)

    Jørgensen, Jens Kristoffer Blach

    From the hands of Greek mythographers a great number of myths have survived along with philosophical discussions of their meaning and relevance for the Greeks. It is little known that something similar existed in ancient Egypt where temple libraries and archives held scholarly literature used...... by the native priesthood, much of which has only been published in recent years. As part of this corpus of texts, the ancient Egyptian mythological manuals offer a unique perspective on how the Egyptian priesthood structured and interpreted Egyptian myths. The thesis looks at the different interpretative...... techniques used in the Tebtunis Mythological Manual (Second century CE) and the Mythological Manual of the Delta (Sixth century BCE) and the place of these manuals within the larger corpus of priestly scholarly literature from ancient Egypt. To organize the wealth of local myths the manuals use model...

  13. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  14. Certification, Accreditation, and Credentialing for 503A Compounding Pharmacies.

    Science.gov (United States)

    Pritchett, Jon; McCrory, Gary; Kraemer, Cheri; Jensen, Brenda; Allen, Loyd V

    2018-01-01

    The terms certification, accreditation, and credentialing are often used interchangeably when they apply to compounding-pharmacy qualifications, but they are not synonymous. The reasons for obtaining each, the requirements for each, and the benefits of each differ. Achieving such distinctions can negatively or positively affect the status of a pharmacy among peers and prescribers as well as a pharmacy's relationships with third-party payors. Changes in the third-party payor industry evolve constantly and, we suggest, will continue to do so. Compounding pharmacists must be aware of those changes to help ensure success in a highly competitive marketplace. To our knowledge at the time of this writing, there is no certification program for compounding pharmacists, although pharmacy technicians can achieve certification and may be required to do so by the state in which they practice (a topic beyond the scope of this article). For that reason, we primarily address accreditation and credentialing for 503A compounding pharmacies. In this article, the evolution of the third-party payment system for compounds is reviewed; the definitions of certification, accreditation, and credentialing are examined; and the benefits and recognition of obtaining accredited or credentialed status are discussed. Suggestions for selecting an appropriate agency that offers accreditation or credentialing, preparing for and undergoing an onsite survey, responding to findings, and maintaining a pharmacy practice that enables a successful survey outcome are presented. The personal experience of author CK during accreditation and credentialing is discussed, as is the role of a consultant (author BJ) in helping compounders prepare for the survey process. A list of agencies that offer accreditation and credentialing for compounding pharmacies is included for easy reference. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  15. Social Responsibility in Intra-organisational Procedures of Higher Education Institutions with AACSB Accreditation

    Directory of Open Access Journals (Sweden)

    Andżelika Dzięgiel

    2016-10-01

    Full Text Available This paper aims to identify the core elements of social responsibility which have been applied in intraorganisational procedures of higher education institutions with AACSB Accreditation. The concept of corporate social responsibility (CSR in entrepreneurial strategies means taking into account their social interests and environmental protection, as well as, relationships with different groups of stakeholders. In contemporary business, CSR activities are very important. Therefore, universities, especially those with prestigious accreditations, should also act in accordance with the rules prevailing in the business market. The Association to Advance Collegiate School of Business (AACSB is a global, nonprofit membership organisation of educational institutions, businesses, and other entities. Higher education institutions with certificates represent the highest standard of achievement for business schools all over the world. For the research and analysis, there have been selected six universities from three countries: the United States, the United Kingdom and New Zealand. According to the international standard ISO 26000 dated as of 2010, social responsibility involves seven core subjects: organisational governance, human rights, labour practices, environment, fair operating practices, customer issues, community involvement and development. All these aspects were researched in intraorganisational procedures of selected higher education institutions with AACSB Accreditation. It is a comprehensive and objective comparison of several educational institutions in the world in terms of their implemented CSR activities. The results of the research show that the institutions under the study established a wide range of procedures for respecting CSR. They took into account transparency, respect to the law, human rights, labour practices and organisational governance. While they pay less attention to the environmental issues, fair operating practices and

  16. Tracking Success: Outputs Versus Outcomes-A Comparison of Accredited and Non-Accredited Public Health Agencies' Community Health Improvement Plan objectives.

    Science.gov (United States)

    Perrault, Evan K; Inderstrodt-Stephens, Jill; Hintz, Elizabeth A

    2018-06-01

    With funding for public health initiatives declining, creating measurable objectives that are focused on tracking and changing population outcomes (i.e., knowledge, attitudes, or behaviors), instead of those that are focused on health agencies' own outputs (e.g., promoting services, developing communication messages) have seen a renewed focus. This study analyzed 4094 objectives from the Community Health Improvement Plans (CHIPs) of 280 local PHAB-accredited and non-accredited public health agencies across the United States. Results revealed that accredited agencies were no more successful at creating outcomes-focused objectives (35% of those coded) compared to non-accredited agencies (33% of those coded; Z = 1.35, p = .18). The majority of objectives were focused on outputs (accredited: 61.2%; non-accredited: 63.3%; Z = 0.72, p = .47). Outcomes-focused objectives primarily sought to change behaviors (accredited: 85.43%; non-accredited: 80.6%), followed by changes in knowledge (accredited: 9.75%; non-accredited: 10.8%) and attitudes (accredited: 1.6%; non-accredited: 5.1%). Non-accredited agencies had more double-barreled objectives (49.9%) compared to accredited agencies (32%; Z = 11.43, p < .001). The authors recommend that accreditation procedures place a renewed focus on ensuring that public health agencies strive to achieve outcomes. It is also advocated that public health agencies work with interdisciplinary teams of Health Communicators who can help them develop procedures to effectively and efficiently measure outcomes of knowledge and attitudes that are influential drivers of behavioral changes.

  17. Accreditation of emerging oral health professions: options for dental therapy education programs.

    Science.gov (United States)

    Gelmon, Sherril B; Tresidder, Anna Foucek

    2011-01-01

    The study explored the options for accreditation of educational programs to prepare a new oral health provider, the dental therapist. A literature review and interviews of 10 content experts were conducted. The content experts represented a wide array of interests, including individuals associated with the various dental stakeholder organizations in education, accreditation, practice, and licensure, as well as representatives of non-dental accrediting organizations whose experience could inform the study. Development of an educational accreditation program for an emerging profession requires collaboration among key stakeholders representing education, practice, licensure, and other interests. Options for accreditation of dental therapy education programs include establishment of a new independent accrediting agency; seeking recognition as a committee within the Commission on Accreditation of Allied Health Education Programs; or working with the Commission on Dental Accreditation (CODA) to create a new accreditation program within CODA. These options are not mutually exclusive, and more than one accreditation program could potentially exist. An educational accreditation program is built upon a well-defined field, where there is a demonstrated need for the occupation and for accreditation of educational programs that prepare individuals to enter that occupation. The fundamental value of accreditation is as one player in the overall scheme of improving the quality of higher education delivered to students and, ultimately, the delivery of health services. Leaders concerned with the oral health workforce will need to consider future directions and the potential roles of new oral health providers as they determine appropriate directions for educational accreditation for dental therapy.

  18. QA experience at the University of Wisconsin accredited dosimetry calibration laboratory

    Energy Technology Data Exchange (ETDEWEB)

    DeWard, L.A.; Micka, J.A. [Univ. of Wisconsin, Madison, WI (United States)

    1993-12-31

    The University of Wisconsin Accredited Dosimetry Calibration Laboratory (UW ADCL) employs procedure manuals as part of its Quality Assurance (QA) program. One of these manuals covers the QA procedures and results for all of the UW ADCL measurement equipment. The QA procedures are divided into two main areas: QA for laboratory equipment and QA for external chambers sent for calibration. All internal laboratory equipment is checked and recalibrated on an annual basis, after establishing its consistency on a 6-month basis. QA for external instruments involves checking past calibration history as well as comparing to a range of calibration values for specific instrument models. Generally, the authors find that a chamber will have a variation of less than 0.5 % from previous Co-60 calibration factors, and falls within two standard deviations of previous calibrations. If x-ray calibrations are also performed, the energy response of the chamber is plotted and compared to previous instruments of the same model. These procedures give the authors confidence in the transfer of calibration values from National Institute of Standards and Technology (NIST).

  19. QA experience at the University of Wisconsin accredited dosimetry calibration laboratory

    International Nuclear Information System (INIS)

    DeWard, L.A.; Micka, J.A.

    1993-01-01

    The University of Wisconsin Accredited Dosimetry Calibration Laboratory (UW ADCL) employs procedure manuals as part of its Quality Assurance (QA) program. One of these manuals covers the QA procedures and results for all of the UW ADCL measurement equipment. The QA procedures are divided into two main areas: QA for laboratory equipment and QA for external chambers sent for calibration. All internal laboratory equipment is checked and recalibrated on an annual basis, after establishing its consistency on a 6-month basis. QA for external instruments involves checking past calibration history as well as comparing to a range of calibration values for specific instrument models. Generally, the authors find that a chamber will have a variation of less than 0.5 % from previous Co-60 calibration factors, and falls within two standard deviations of previous calibrations. If x-ray calibrations are also performed, the energy response of the chamber is plotted and compared to previous instruments of the same model. These procedures give the authors confidence in the transfer of calibration values from National Institute of Standards and Technology (NIST)

  20. Image Quality Improvement after Implementation of a CT Accreditation Program

    International Nuclear Information System (INIS)

    Kim, You Sung; Jung, Seung Eun; Choi, Byung Gil; Shin, Yu Ri; Hwang, Seong Su; Ku, Young Mi; Lim, Yeon Soo; Lee, Jae Mun

    2010-01-01

    The purpose of this study was to evaluate any improvement in the quality of abdominal CTs after the utilization of the nationally based accreditation program. Approval was obtained from the Institutional Review Board, and informed consent was waived. We retrospectively analyzed 1,011 outside abdominal CTs, from 2003 to 2007. We evaluated images using a fill-up sheet form of the national accreditation program, and subjectively by grading for the overall CT image quality. CT scans were divided into two categories according to time periods; before and after the implementation of the accreditation program. We compared CT scans between two periods according to parameters pertaining to the evaluation of images. We determined whether there was a correlation between the results of a subjective assessment of the image quality and the evaluation scores of the clinical image. The following parameters were significantly different after the implementation of the accreditation program: identifying data, display parameters, scan length, spatial and contrast resolution, window width and level, optimal contrast enhancement, slice thickness, and total score. The remaining parameters were not significantly different between scans obtained from the two different periods: scan parameters, film quality, and artifacts. After performing the CT accreditation program, the quality of the outside abdominal CTs show marked improvement, especially for the parameters related to the scanning protocol

  1. Feasibility study on introduction of KOLAS (Korea Laboratory Accreditation Scheme) in nuclear examination facility

    International Nuclear Information System (INIS)

    Park, Dae Gyu; Hong, K. P.; Song, W. S.; Min, D. K.

    1999-07-01

    To be an institute officially authorized by the KOLAS, the understanding and the analysis of following contents is required.: the understanding of concept required to get the accreditation of testing, the system specifying an internationally accredited testing and examination organization, international organization in the field of laboratory accreditation, domestic laboratory accreditation organization(KOLAS), the investigation of the regulations with laboratory accreditation in Korea, the investigation of the procedures accrediting a testing and examination organization, the investigation of general requirements(ISO 17025) for a testing and examination organization. (author)

  2. Salinas : theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2004-08-01

    This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

  3. Photovoltaic module certification/laboratory accreditation criteria development: Implementation handbook

    Energy Technology Data Exchange (ETDEWEB)

    Osterwald, C.R. [National Renewable Energy Laboratory, Golden, CO (United States); Hammond, R.L.; Wood, B.D.; Backus, C.E.; Sears, R.L. [Arizona State Univ., Tempe, AZ (United States); Zerlaut, G.A. [SC-International, Inc., Tempe, AZ (United States); D`Aiello, R.V. [RD Associates, Tempe, AZ (United States)

    1996-08-01

    This document covers the second phase of a two-part program. Phase I provided an overview of the structure and function of typical product certification/laboratory accreditation programs. This report (Phase H) provides most of the draft documents that will be necessary for the implementation of a photovoltaic (PV) module certification/laboratory accreditation program. These include organizational documents such as articles of incorporation, bylaws, and rules of procedure, as well as marketing and educational program documents. In Phase I, a 30-member criteria development committee was established to guide, review and reach a majority consensus regarding criteria for a PV certification/laboratory accreditation program. Committee members represented PV manufacturers, end users, standards and codes organizations, and testing laboratories. A similar committee was established for Phase II; the criteria implementation committee consisted of 29 members. Twenty-one of the Phase I committee members also served on the Phase II committee, which helped to provide program continuity during Phase II.

  4. Accreditation of qualification testing organizations: the industry viewpoint

    International Nuclear Information System (INIS)

    Roby, A.

    1983-01-01

    This paper presents the industry viewpoint on the program for the Accreditation of Qualification Testing Organizations, which has been proposed for rulemaking by the Nuclear Regulatory Commission. The IEEE has agreed to establish the program content, and would administer its requirements in accordance with an agreement between the NRC and IEEE of September 30th, 1981. Presented in this paper is the industry perspective, developed and prepared through the AIF, identifying the serious concerns which the accreditation program has raised. Discussed are the disadvantages of the program and those present benefits which would be lost if the program was adopted. The value of greater emphasis on current regulation to improve the qualification process is presented and the paper details areas where the NRC proposals do not provide adequate justification for the accreditation program

  5. System Quality Management in Software Testing Laboratory that Chooses Accreditation

    Directory of Open Access Journals (Sweden)

    Yanet Brito R.

    2013-12-01

    Full Text Available The evaluation of software products will reach full maturity when executed by the scheme and provides third party certification. For the validity of the certification, the independent laboratory must be accredited for that function, using internationally recognized standards. This brings with it a challenge for the Industrial Laboratory Testing Software (LIPS, responsible for testing the products developed in Cuban Software Industry, define strategies that will permit it to offer services with a high level of quality. Therefore it is necessary to establish a system of quality management according to NC-ISO/IEC 17025: 2006 to continuously improve the operational capacity and technical competence of the laboratory, with a view to future accreditation of tests performed. This article discusses the process defined in the LIPS for the implementation of a Management System of Quality, from the current standards and trends, as a necessary step to opt for the accreditation of the tests performed.

  6. Accreditation of nondestructive testing (NDT) laboratories: do we have choices?

    International Nuclear Information System (INIS)

    Abd Nassir Ibrahim

    2003-01-01

    Demand for quality of products and services by consumers throughout the world resulted in fierce competition among manufacturers and service providers. Such a competition forces NDT service providers to deliver the highest quality and most reliable results at a reasonable price to their clients. NDT beneficiaries such as oil and gas, and power generation sectors through their quality system such as ISO 9001 Version 2000 demand that the quality system adopted by organizations providing services to them must be evaluated. Such requirement leave NDT services companies with no option except to have them accredited. As for today, the most logical accreditation scheme applicable to NDT organizations is the ISO 17025. This paper reviews the current status and forecast the need for such an accreditation in Malaysia. (Author)

  7. Accreditation of testing laboratories in CNEA (National Atomic Energy Commission)

    International Nuclear Information System (INIS)

    Piacquadio, N.H.; Casa, V.A.; Palacios, T.A.

    1993-01-01

    The recognition of the technical capability of a testing laboratory is carried out by Laboratory Accreditation Bodies as the result of a satisfactory evaluation and the systematic follow up of the certified qualification. In Argentina the creation of a National Center for the Accreditation of Testing Laboratories, as a first step to assess a National Accreditation System is currently projected. CNEA, as an institution involved in technological projects and in the development and production of goods and services, has adopted since a long time ago quality assurance criteria. One of their requirements is the qualification of laboratories. Due to the lack of a national system, a Committee for the Qualification of Laboratories was created jointly by the Research and Development and Nuclear Fuel Cycle Areas with the responsibility of planning and management of the system evaluation and the certification of the quality of laboratories. The experience in the above mentioned topics is described in this paper. (author)

  8. HASL procedures manual

    International Nuclear Information System (INIS)

    1980-08-01

    Addition and corrections to the following sections of the HASL Procedures Manual are provided: Table of Contents; Bibliography; Fallout Collection Methods; Wet/Dry Fallout Collection; Fluoride in Soil and Sediment; Strontium-90; Natural Series; Alpha Emitters; and Gamma Emitters

  9. SEVERO code - user's manual

    International Nuclear Information System (INIS)

    Sacramento, A.M. do.

    1989-01-01

    This user's manual contains all the necessary information concerning the use of SEVERO code. This computer code is related to the statistics of extremes = extreme winds, extreme precipitation and flooding hazard risk analysis. (A.C.A.S.)

  10. The organizational measurement manual

    National Research Council Canada - National Science Library

    Wealleans, David

    2001-01-01

    ... Relationship of process to strategic measurements Summary 37 36Contents 19/10/2000 1:23 pm Page vi vi THE ORGANIZATIONAL MEASUREMENT MANUAL 4 PART 2 ESTABLISHING A PROCESS MEASUREMENT PROGRAMME...

  11. Geochemical engineering reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Owen, L.B.; Michels, D.E.

    1984-01-01

    The following topics are included in this manual: physical and chemical properties of geothermal brine and steam, scale and solids control, processing spent brine for reinjection, control of noncondensable gas emissions, and goethermal mineral recovery. (MHR)

  12. NCDC Archive Documentation Manuals

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Climatic Data Center Tape Deck Documentation library is a collection of over 400 manuals describing NCDC's digital holdings (both historic and current)....

  13. EMAP Users Manual.

    Science.gov (United States)

    Kotz, Arnold; Redondo, Rory

    Presented is the user's manual for the Educational Manpower Information Sources Project (EMAP), an information file containing approximately 325 document abstracts related to the field of educational planning. (The EMAP file is described in document SP 006 747.) (JB)

  14. FINAS. Example manual. 2

    International Nuclear Information System (INIS)

    Iwata, Koji; Tsukimori, Kazuyuki; Ueno, Mutsuo

    2003-12-01

    FINAS is a general purpose structural analysis computer program which was developed by Japan Nuclear Cycle Development Institute for the analysis of static, dynamic and thermal responses of elastic and inelastic structures by the finite element method. This manual contains typical analysis examples that illustrate applications of FINAS to a variety of structural engineering problems. The first part of this manual presents fundamental examples in which numerical solutions by FINAS are compared with some analytical reference solutions, and the second part of this manual presents more complex examples intended for practical application. All the input data images and principal results for each problem are included in this manual for beginners' convenience. All the analyses are performed by using the FINAS Version 13.0. (author)

  15. Undergraduate homeopathy education in Europe and the influence of accreditation.

    Science.gov (United States)

    Viksveen, Petter; Steinsbekk, Aslak

    2011-10-01

    The safety of patients consulting with practitioners of complementary and alternative medicine (CAM) partially depends on practitioners' competence, and thus the standard of undergraduate education. Describe undergraduate homeopathy courses in Europe, student/graduate numbers and whether there were differences between recognised/accredited and non-recognised/non-accredited courses. Cross sectional survey of current homeopathy undergraduate education in Europe in 2008. Data from 145 (94.8%) out of 153 identified courses were collected. Eighty-five (55.6%) responded to a questionnaire survey. For others some data was extracted from their websites. Only data from the questionnaire survey is used for the main analysis. The average course in the questionnaire survey had 47 enrolled students and 142 graduates, and lasted 3.6 years part-time. An estimated 6500 students were enrolled and 21,000 had graduated from 153 identified European undergraduate homeopathy courses. Out of 85 courses most had entry requirements and provided medical education (N = 48) or required students to obtain this competence elsewhere (N = 33). The average number of teaching hours were 992 (95% confidence interval (CI) 814, 1170) overall, with 555 h (95%CI 496, 615) for homeopathy. Four out of five courses were recognised/accredited. Recognised/accredited part-time courses lasted significantly longer than non-recognised/non-accredited courses (difference 0.6 years, 95%CI 0.0-1.2, P = 0.040), and offered significantly larger numbers of teaching hours in homeopathy (difference 167 h, 95%CI 7-327, P = 0.041). About 6500 currently enrolled students are doing undergraduate homeopathy education in Europe and 21,000 have graduated from such courses over a period of about 30 years. Undergraduate homeopathy education in Europe is heterogeneous. Recognised/accredited courses are more extensive with more teaching hours. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. DER Certification Laboratory Pilot, Accreditation Plan, and Interconnection Agreement Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Key, T.; Sitzlar, H. E.; Ferraro, R.

    2003-11-01

    This report describes the first steps toward creating the organization, procedures, plans and tools for distributed energy resources (DER) equipment certification, test laboratory accreditation, and interconnection agreements. It covers the activities and accomplishments during the first period of a multiyear effort. It summarizes steps taken to outline a certification plan to assist in the future development of an interim plan for certification and accreditation activities. It also summarizes work toward a draft plan for certification, a beta Web site to support communications and materials, and preliminary draft certification criteria.

  17. Requirements for the accreditation of a calibration laboratory

    International Nuclear Information System (INIS)

    Palacios, T.A.; Peretti, M.M.

    1993-01-01

    CNEA's activity in calibration is recent but it has a significant development. To assure high quality results, activity must be sustained and improved from day to day. The calibrations laboratory was accredited before Laboratories Qualification Committee, thus adding reliability to its results and making it more competitive when compared to other laboratories not accredited. Among other services given are supervision and follow up of calibrations in laboratories, participation in interlaboratory assays together with other calibration laboratories and assessments on calibration aspects of measuring equipment. (author)

  18. The Regina Elena National Cancer Institute process of accreditation according to the standards of the Organisation of European Cancer Institutes.

    Science.gov (United States)

    Canitano, Stefano; Di Turi, Annunziata; Caolo, Giuseppina; Pignatelli, Adriana C; Papa, Elena; Branca, Marta; Cerimele, Marina; De Maria, Ruggero

    2015-01-01

    The accreditation process is, on the one hand, a tool used to homogenize procedures, rendering comparable and standardized processes of care, and on the other, a methodology employed to develop a culture of quality improvement. Although not yet proven by evidence-based studies that health outcomes improve as a result of an accreditation to excellence, it is undeniable that better control of healthcare processes results in better quality and safety of diagnostic and therapeutic pathways. The Regina Elena National Cancer Institute underwent the accreditation process in accordance with the standards criteria set by the Organisation of European Cancer Institutes (OECI), and it has recently completed the process, acquiring its designation as a Comprehensive Cancer Center (CCC). This was an invaluable opportunity for the Regina Elena Institute to create a more cohesive environment, to widely establish a culture of quality, to implement an institutional information system, and to accelerate the process of patient involvement in strategic decisions. The steps of the process allowed us to evaluate the performance and the organization of the institute and put amendments in place designed to be adopted through 26 improvement actions. These actions regarded several aspects of the institute, including quality culture, information communication technology system, care, clinical trials unit, disease management team, nursing, and patient empowerment and involvement. Each area has a timeline. We chose to present the following 3 improvement actions: clinical trial center, computerized ambulatory medical record, and centrality of patient and humanization of clinical pathway.

  19. A project management approach to an ACPE accreditation self-study.

    Science.gov (United States)

    Dominelli, Angela; Iwanowicz, Susan L; Bailie, George R; Clarke, David W; McGraw, Patrick S

    2007-04-15

    In preparation for an on-site evaluation and accreditation by the American Council on Pharmaceutical Education (ACPE), the Albany College of Pharmacy employed project management techniques to complete a comprehensive self-study. A project lifecycle approach, including planning, production, and turnover phases, was used by the project's Self-Study Steering Committee. This approach, with minimal disruption to college operations, resulted in the completion of the self-study process on schedule. Throughout the project, the Steering Committee maintained a log of functions that either were executed successfully or in hindsight, could have been improved. To assess the effectiveness of the project management approach to the the self-study process, feedback was obtained from the College community through a poststudy survey. This feedback, coupled with the Steering Committee's data on possible improvements, form the basis for the lessons learned during this self-study process.

  20. 9 CFR 161.1 - Statement of purpose; performance of accredited duties in different States.

    Science.gov (United States)

    2010-01-01

    ... appropriate laboratory for testing with complete and accurate paperwork. (ix) Develop appropriate biosecurity... REVOCATION OF SUCH ACCREDITATION REQUIREMENTS AND STANDARDS FOR ACCREDITED VETERINARIANS AND SUSPENSION OR... eradication and control programs; (v) Laboratory support in confirming disease diagnoses; (vi) Ethical and...

  1. 78 FR 45917 - National Committee on Foreign Medical Education and Accreditation Meeting

    Science.gov (United States)

    2013-07-30

    ... DEPARTMENT OF EDUCATION National Committee on Foreign Medical Education and Accreditation Meeting AGENCY: Office of Postsecondary Education, National Committee on Foreign Medical Education and... meeting of the National Committee on Foreign Medical Education and Accreditation (NCFMEA). Parts of this...

  2. 76 FR 15945 - National Voluntary Laboratory Accreditation Program (NVLAP) Workshop for Laboratories Interested...

    Science.gov (United States)

    2011-03-22

    ... Information Technology (HIT) Electronic Health Record Technology AGENCY: National Institute of Standards and... NVLAP accreditation to perform Testing of Health Information Technology (HIT) electronic health record... HIT electronic health record technology. NVLAP accreditation criteria are established in accordance...

  3. The U.S. Accreditation System and the CRE's Quality Audits--A Comparative Study.

    Science.gov (United States)

    Amaral, Alberto M. S. C.

    1998-01-01

    Compares the U.S. system of accrediting higher education institutions with the European Association of Universities' Quality Audits. Recommends external agencies such as the U.S. regional accrediting agencies to conduct meta evaluation. (SK)

  4. 9 CFR 161.2 - Requirements and application procedures for accreditation.

    Science.gov (United States)

    2010-01-01

    ... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ACCREDITATION OF VETERINARIANS AND SUSPENSION OR REVOCATION OF... addressing the subject areas which led to loss of accreditation for the applicant, and subject areas which...

  5. 75 FR 73088 - Medicare Program; Application by the American Association for Accreditation of Ambulatory Surgery...

    Science.gov (United States)

    2010-11-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare and Medicaid Services [CMS-2332-PN] Medicare Program; Application by the American Association for Accreditation of Ambulatory Surgery... Association for Accreditation of Ambulatory Surgery Facilities (AAAASF) for recognition as a national...

  6. Definition of criteria and indicators for the prevention of Healthcare-Associated Infections (HAIs) in hospitals for the purposes of Italian institutional accreditation and performance monitoring.

    Science.gov (United States)

    Tardivo, S; Moretti, F; Nobile, M; Agodi, A; Appignanesi, R; Arrigoni, C; Baldovin, T; Brusaferro, S; Canino, R; Carli, A; Chiesa, R; D'Alessandro, D; D'Errico, M M; Giuliani, G; Montagna, M T; Moro, M; Mura, I I; Novati, R; Orsi, G B; Pasquarella, C; Privitera, G; Ripabelli, G; Rossini, A; Saia, M; Sodano, L; Torregrossa, M V; Torri, E; Zarrilli, R; Auxilia, F; SItI, Gisio

    2017-01-01

    Healthcare-associated infections (HAIs) are an important issue in terms of quality of care. HAIs impact patient safety by contributing to higher rates of preventable mortality and prolonged hospitalizations. In Italy, analysis of the currently available accreditation systems shows a substantial heterogeneity of approaches for the prevention and surveillance of HAIs in hospitals. The aim of the present study is to develop and propose the use of a synthetic assessment tool that could be implemented homogenously throughout the nation. An analysis of nine international and of the 21 Italian regional accreditation systems was conducted in order to identify requirements and indicators implemented for HAI prevention and control. Two relevant reviews on this topic were further analyzed to identify additional evidence-based criteria. The project team evaluated all the requirements and indicators with consensus meeting methodology, then those applicable to the Italian context were grouped into a set of "focus areas". The analysis of international systems and Italian regional accreditation manuals led to the identification respectively of 19 and 14 main requirements, with relevant heterogeneity in their application. Additional evidence-based criteria were included from the reviews analysis. From the consensus among the project team members all the standards were compared and 20 different thematic areas were identified, with a total of 96 requirements and indicators for preventing and monitoring HAIs. The study reveals a great heterogeneity in the definition of accreditation criteria between the Italian regions. The introduction of a uniform, synthetic assessment instrument, based on the review of national and international standards, may serve as a self-assessment tool to evaluate the achievement of a minimum standards set for HAIs prevention and control in healthcare facilities. This may be used as an assessment tool by the Italian institutional accreditation system, also

  7. SHARP User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Thomas, J. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States); Solberg, Jerome [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-31

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  8. SHARP User Manual

    International Nuclear Information System (INIS)

    Yu, Y. Q.; Shemon, E. R.; Thomas, J. W.; Mahadevan, Vijay S.; Rahaman, Ronald O.; Solberg, Jerome

    2016-01-01

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  9. 77 FR 13312 - National Committee on Foreign Medical Education and Accreditation

    Science.gov (United States)

    2012-03-06

    ... DEPARTMENT OF EDUCATION National Committee on Foreign Medical Education and Accreditation AGENCY: National Committee on Foreign Medical Education and Accreditation, Office of Postsecondary Education, U.S... National Committee on Foreign Medical Education and Accreditation (NCFMEA). Parts of this meeting will be...

  10. Role of accrediting bodies in providing education leadership in medical education

    Directory of Open Access Journals (Sweden)

    Sam Leinster

    2014-01-01

    Role of accreditation authorities: If accreditation authorities are to provide leadership in medical education they must undertake regular review of their standards. This should be informed by all stakeholders and include experts in medical education. The format of the standards must provide clear direction to medical schools. Accreditation should take place regularly and should result in the production of a publicly accessible report.

  11. Managing the Demands of Accreditation: The Impact on Global Business Schools

    Science.gov (United States)

    Kourik, Janet L.; Maher, Peter E.; Akande, Benjamin O.

    2011-01-01

    Over the past several years the academic community has become abundantly aware of the requirements of university-wide and specialized accreditation. This paper describes the background to accreditation models initiated in several regions of the world, such as the specialized business accreditations of the European Quality Improvement System…

  12. 75 FR 60773 - Voluntary Private Sector Accreditation and Certification Preparedness Program

    Science.gov (United States)

    2010-10-01

    ...] Voluntary Private Sector Accreditation and Certification Preparedness Program AGENCY: Federal Emergency... concerns in the Voluntary Private Sector Accreditation and Certification Preparedness Program (PS-Prep...-53 (the 9/11 Act) mandated DHS to establish a voluntary private sector preparedness accreditation and...

  13. 75 FR 53277 - Notice of Intent To Terminate Selected National Voluntary Laboratory Accreditation Program (NVLAP...

    Science.gov (United States)

    2010-08-31

    ... Testing LAP revealed that there are four (4) laboratories enrolled in the plumbing area. Two of the... Service (IAS), an accreditation body recognized by the International Laboratory Accreditation Cooperation... to eliminate the duplicate accreditations, saving each between $4,000 and $8,000 per year in fees...

  14. Op weg naar een accreditatiesysteem van Nederlandse ziekenhuizen [Towards an accreditation system of Dutch hospitals

    NARCIS (Netherlands)

    Gennip, E.M.S.J. van; Linnebank, F.; Sillevis Smitt, P.A.E.; Geldof, C.A.

    1999-01-01

    The development of the Netherlands system for accreditation of hospitals started in 1989 in the Pilotproject Accreditation (PACE). This resulted in the establishment of the Netherlands Institute for Accreditation of Hospitals (NIAH) early 1999, by the Dutch Association of Hospitals, the Dutch

  15. 22 CFR 96.110 - Dissemination and reporting of information about temporarily accredited agencies.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Dissemination and reporting of information... ACT OF 2000 (IAA) Procedures and Standards Relating to Temporary Accreditation § 96.110 Dissemination and reporting of information about temporarily accredited agencies. The accrediting entity must...

  16. 9 CFR 161.4 - Suspension or revocation of veterinary accreditation; criminal and civil penalties.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Suspension or revocation of veterinary... REVOCATION OF SUCH ACCREDITATION § 161.4 Suspension or revocation of veterinary accreditation; criminal and... to practice veterinary medicine in at least one State. (c) Accreditation shall be automatically...

  17. Accreditation in the USA: Origins, Developments and Future Prospects. Improving the Managerial Effectiveness of Higher Education.

    Science.gov (United States)

    El-Khawas, Elaine

    This study analyzes the accreditation experience in the United States with special emphasis on the issues and decisions that surrounded the development of evaluation procedures and standards. Attention is given to the relationship between accrediting agencies and governmental agencies, the effect of accrediting requirements on the way that…

  18. Shared Governance and Regional Accreditation: Institutional Processes and Perceptions

    Science.gov (United States)

    McGrane, Wendy L.

    2013-01-01

    This qualitative single-case research study was conducted to gain deeper understanding of the institutional processes to address shared governance accreditation criteria and to determine whether institutional processes altered stakeholder perceptions of shared governance. The data collection strategies were archival records and personal…

  19. Accreditation of Biomedical Engineering Programs in Europe - Challenge and Opportunity

    National Research Council Canada - National Science Library

    Nagel, Joachim

    2001-01-01

    .... Accreditation plays an important role in ensuring transnational mobility and employability, and offers the additional advantages of confidence for the employer that the employee has the necessary education, training and responsible experience, and confidence for the user of the service, e.g. patients, that those providing the service are effective and competent.

  20. A New Accreditation Problem: Defining the Liberal Arts and Sciences.

    Science.gov (United States)

    Hoskins, Robert L.

    In 1985, the Accrediting Council on Education in Journalism and Mass Communications (ACEJMC) adopted a standard requiring that journalism/mass communications students take a minimum of 90 semester hours in courses outside their major, with at least 65 hours in liberal arts and sciences. The term "liberal arts" defies precise definition,…

  1. Quality Development in Health Care: Participation vs. Accreditation

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Hertzum, Morten; Scheuer, John Damm

    2018-01-01

    and balanced with participatory approaches that allow for local experimentation and implementation of high-quality outcomes. We describe accreditation and participatory design as two approaches to recon guring and aligning work organization and technology; further, we emphasize the differences in each approach...

  2. Revisiting Constructivist Teaching Methods in Ontario Colleges Preparing for Accreditation

    Science.gov (United States)

    Schultz, Rachel A.

    2015-01-01

    At the time of writing, the first community colleges in Ontario were preparing for transition to an accreditation model from an audit system. This paper revisits constructivist literature, arguing that a more pragmatic definition of constructivism effectively blends positivist and interactionist philosophies to achieve both student centred…

  3. Accreditation in the Netherlands: Does Accountability Improve Educational Quality?

    Science.gov (United States)

    van Berkel, Henk; Wijnen, Wynand

    2010-01-01

    This article traces the changes in quality assurance within the Dutch higher education system. It starts with a brief history of the development of the Dutch accreditation system, which is the latest step in a process that started with an external quality assurance system. This is followed by an extensive description of the present accreditation…

  4. International Accreditations as Drivers of Business School Quality Improvement

    Science.gov (United States)

    Bryant, Michael

    2013-01-01

    Business schools are under pressure to implement continuous improvement and quality assurance processes to remain competitive in a globalized higher education market. Drivers for quality improvement include external, environmental pressures, regulatory bodies such as governments, and, increasingly, voluntary accreditation agencies such as AACSB…

  5. Delegation and Empowerment in CAATE Accredited Athletic Training Education Programs

    Science.gov (United States)

    Hoch, Johanna; White, Kristi; Starkey, Chad; Krause, B. Andrew

    2009-01-01

    Context: The use of delegation can potentially alleviate some of the stress with administering an athletic training education program (ATEP) and allow program directors (PDs) to focus on other aspects of their academic role. Objectives: To determine the reasons PDs delegate and do not delegate tasks to other faculty of ATEPs accredited by the…

  6. Assessment of the impact of NUC accreditation exercise on ...

    African Journals Online (AJOL)

    This is a survey research aimed at determining the impact of National Universities Commission's accreditation exercise on personnel in the business education programmes of the universities in the South-east Geopolitical Zone of Nigeria. One research question and one null hypothesis guided the study. The population ...

  7. Translator education and accreditation policies in Africa: Exploring ...

    African Journals Online (AJOL)

    This article questions the presuppositions on which current translator education and accreditation in South Africa and Africa are based. This is done on the basis of Tymozcko's reconceptualisation of translation studies and of Robinson's theory of translation quality. It presents sets of data as case studies that support ...

  8. Addiction Counseling Accreditation: CACREP's Role in Solidifying the Counseling Profession

    Science.gov (United States)

    Hagedorn, W. Bryce; Culbreth, Jack R.; Cashwell, Craig S.

    2012-01-01

    In this article, the authors discuss the Council for Accreditation of Counseling and Related Educational Programs' (CACREP) role in furthering the specialty of addiction counseling. After sharing a brief history and the role of counselor certification and licensure, the authors share the process whereby CACREP developed the first set of…

  9. Accreditation and Quality Assurance in the Egyptian Higher Education System

    Science.gov (United States)

    Schomaker, Rahel

    2015-01-01

    Purpose: This study aims to analyze the quality of the Egyptian accreditation system. With a view on the high competition in the domestic labor market as well as with regards to the international competitiveness of Egyptian graduates and the potential role of Egyptian universities in the international market for higher education, a high quality of…

  10. The Journey toward NADE Accreditation: Investments Reap Benefits

    Science.gov (United States)

    Kratz, Stephanie

    2018-01-01

    The author examines the process for applying for National Association for Development Education (NADE) accreditation. The multi-year process began when the English faculty of the community college she works at reviewed data from the National Community College Benchmark Project. The data showed low success rates and poor persistence from…

  11. Administrator Preparation for Multicultural Leadership: Inside Four Nationally Accredited Programs

    Science.gov (United States)

    Gardiner, Mary; Enomoto, Ernestine K.

    2004-01-01

    As accrediting associations and ISLLC Standards for School Leaders attest, school leaders have a critical role to insure equitable educational opportunities for diverse students. But how are they being prepared for multicultural leadership in administrator preparation programs? This qualitative study examined and contrasted four different…

  12. The Community College IR Shop and Accreditation: A Case Study

    Science.gov (United States)

    Johnston, George

    2011-01-01

    This article presents results of a study the author recently conducted on the role of traditional institutional research (IR) offices in support of accreditation activities and institutional effectiveness. The purpose of the study was to confirm or disconfirm the utility of a theoretical model developed by Brittingham, O'Brien, and Alig (2008) of…

  13. Experiences of Accreditation of Medical Education in Taiwan

    Directory of Open Access Journals (Sweden)

    Chi-Wan Lai

    2009-12-01

    Full Text Available This review aims to introduce the Taiwanese Medical Accreditation System: its history, role and future goals. In 1999, the Ministry of Education, Taiwanese Government commissioned the non-profit National Health Research Institutes (NHRI to develop a new medical accreditation system. According to that policy, the Taiwan Medical Accreditation Council (TMAC was established in the same year. The council serves a similar function to that of the Liaison Committee on Medical Education (LCME of the United States and the Australian Medical Council (AMC. The accreditation process consists of a self-assessment plus a four-day site visit by a team of eight medical educators that are headed by one of the council members of the TMAC. The first cycle of initial visits was completed from 2001 to 2004. Subsequent follow-up visits were arranged according to the results of the survey with smaller-sized teams and shorter periods. There is evidence to suggest that the majority (seven of eleven of the medical schools in Taiwan have made good progress. TMAC’s next step will be to monitor the progress and raise the standard of medical education in individual schools with a homogenous, superior standard of medical education.

  14. Accreditation and Student Consumer Protection. An Occasional Paper.

    Science.gov (United States)

    Jung, Steven M.

    The role of postsecondary accreditation and its relation to student consumer protection are discussed in this monograph. The importance of this concept is examined in light of increased marketing efforts on the part of higher education institutions. It is emphasized that students are consumers and their rights should be protected. Possible areas…

  15. 9 CFR 439.52 - Suspension of accreditation.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Suspension of accreditation. 439.52 Section 439.52 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... of the following violations of law: (a) Any felony. (b) Any misdemeanor based upon acquiring...

  16. Internships in School Psychology: Selection and Accreditation Issues

    Science.gov (United States)

    Keilin, W. Gregory

    2015-01-01

    Doctoral students in school psychology often report unique issues and challenges when seeking a doctoral internship. The number and range of accredited internship positions available to School Psychology (SP) students in the Association of Psychology Postdoctoral and Internship Centers (APPIC) Match is quite limited, and they often obtain…

  17. Addressing the Need for Management Processes for Higher Education Accreditation.

    Science.gov (United States)

    Brennan, Linda L.; Austin, Walter W.

    2003-01-01

    The accreditation standards of the Association to Advance Collegiate Schools of Business (AACSB International) ask business schools to describe consistent processes that provide for operational consistency and continuous improvement in support of the schools' stated missions. This article addresses the identification of requisite quality…

  18. 29 CFR 1919.3 - Application for accreditation.

    Science.gov (United States)

    2010-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... accreditation with the Assistant Secretary of Labor for Occupational Safety and Health, United States Department... stability; (7) Names of at least three business references who will furnish information regarding work...

  19. Predictors of the effectiveness of accreditation on hospital performance

    DEFF Research Database (Denmark)

    Bie Bogh, Søren; Falstie-Jensen, Anne Mette; Hollnagel, Erik

    2017-01-01

    Objective: To identify predictors of the effectiveness of hospital accreditation on process performance measures. Design: A multi-level, longitudinal, stepped-wedge, nationwide study. Participants: All patients admitted for acute stroke, heart failure, ulcers, diabetes, breast cancer and lung can...

  20. Towards quality, comprehensiveness and excellence. The accreditation project of the Organisation of European Cancer Institutes (OECI)

    NARCIS (Netherlands)

    Saghatchian, Mahasti; Hummel, J. Marjan; Hummel, Henk; Otter, Renee; de Valeriola, Dominique; van Harten, Willem H.; Paradiso, Angelo; Koot, Bert; Ringborg, Ulrik; Tursz, Thomas

    2008-01-01

    There are important gaps in the health status of citizens across Europe, as measured by life expectancy, mortality or morbidity data (Report for the European Commission on the health status of the European Union, 2003). Among the main determinants of the major causes of mortality and morbidity,

  1. Comprehensive mitigation assessment process (COMAP) - Description and instruction manual

    Energy Technology Data Exchange (ETDEWEB)

    Makundi, Willy; Sathaye, Jayant

    2001-11-09

    In order to prepare policies and plans to reduce GHG emissions, national policy-makers need information on the costs and benefits of different mitigation options in addition to their carbon implications. Policy-makers must weigh the costs, benefits, and impacts of climate change mitigation and adaptation options, in the face of competition for limited resources. The policy goal for mitigation options in the land use sector is to identify which mix of options is likely to best achieve the desired forestry service and production objectives at the least cost, while attempting to maximize economic and social benefits, and minimize negative environmental and social impacts. Improved national-level cost estimates of response options in the land use sector can be generated by estimating the costs and benefits of different forest management practices appropriate for specific country conditions which can be undertaken within the constraint of land availability and its opportunity cost. These co st and land use estimates can be combined to develop cost curves, which would assist policy-makers in constructing policies and programs to implement forest responses.

  2. ABET [Accreditation Board for Engineering and Technology] accreditation for engineering technology

    International Nuclear Information System (INIS)

    Foulke, L.R.

    1989-01-01

    Engineering technology is that part of the technological field that requires the application of scientific and engineering knowledge and methods combined with technical skills in support of engineering activities. It lies in the occupational spectrum between the craftsman and the engineer at the end of the spectrum closest to the engineer. The term engineering technician is applied to the graduates of associate degree programs. Graduates of baccalaureate programs are called engineering technologists. The content of a 4-yr engineering technology program treats the same subject areas as does an engineering program but with more emphasis on application, use of established design concepts, and the laboratory experience rather than on science, conceptual design, and new development. The mathematics content of accreditable baccalaureate programs must contain at least 12 semester-hour credits of mathematics including the study of calculus. Engineering managers should take a hard look at what is really needed in the education of that majority of a personnel who do not work as design and development engineers. Graduates of engineering technology programs may be better qualified than those of some engineering programs for the majority of jobs in our industry today

  3. Aircraft operations management manual

    Science.gov (United States)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  4. EML procedures manual

    International Nuclear Information System (INIS)

    Volchok, H.L.; de Planque, G.

    1982-01-01

    This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

  5. Salinas : theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  6. Accreditation Follow-Up: A Grounded Theory Qualitative Study of WASC-Accredited Private Schools in Southern California

    Science.gov (United States)

    Serafin, Marsha Jean

    2014-01-01

    The purpose of this grounded theory qualitative study was to explore the value and effectiveness of key aspects of the accreditation process. The aspects explored were the procedures and structures that school leadership establishes in response both to the schoolwide Action Plans that a school develops as part of the self-study process and to the…

  7. Supra-National Accreditation, Trust and Institutional Autonomy: Contrasting Developments of Accreditation in the United States and Europe

    Science.gov (United States)

    Amaral, Alberto; Rosa, Maria Joao; Tavares, Diana Amado

    2009-01-01

    There have been calls to increase the autonomy of higher education institutions in Europe for a number of years. They have been counterbalanced by demands for increasing accountability and a European quality assurance system. In London in 2007, the European ministers of education decided to implement a European register of accredited quality…

  8. Ethics and Accreditation in Addictions Counselor Training: Possible Field Placement Issues for CACREP-Accredited Addictions Counseling Programs

    Science.gov (United States)

    Linton, Jeremy M.

    2012-01-01

    Professional counselors have long been practicing in alcohol and drug treatment settings. However, only recently has the counseling field offered formal recognition of addictions counseling as a specialization through the implementation of accreditation standards for addiction counseling training programs. With the passage of the 2009 standards,…

  9. MANUAL LOGIC CONTROLLER (MLC)

    OpenAIRE

    Claude Ziad Bayeh

    2015-01-01

    The “Manual Logic Controller” also called MLC, is an electronic circuit invented and designed by the author in 2008, in order to replace the well known PLC (Programmable Logic Controller) in many applications for its advantages and its low cost of fabrication. The function of the MLC is somewhat similar to the well known PLC, but instead of doing it by inserting a written program into the PLC using a computer or specific software inside the PLC, it will be manually programmed in a manner to h...

  10. Beyond the Manual Channel

    DEFF Research Database (Denmark)

    , the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the fourth time, the workshop had sign language corpora as its main topic. This time, the focus was on any aspect beyond...... the manual channel. Not surprisingly, most papers deal with non-manuals on the face. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

  11. Radar and ARPA manual

    CERN Document Server

    Bole, A G

    2013-01-01

    Radar and ARPA Manual focuses on the theoretical and practical aspects of electronic navigation. The manual first discusses basic radar principles, including principles of range and bearing measurements and picture orientation and presentation. The text then looks at the operational principles of radar systems. Function of units; aerial, receiver, and display principles; transmitter principles; and sitting of units on board ships are discussed. The book also describes target detection, Automatic Radar Plotting Aids (ARPA), and operational controls of radar systems, and then discusses radar plo

  12. TRUBA User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Tereshchenko, M. A.; Castejon, F.; Cappa, A.

    2008-04-25

    The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs.

  13. TRUBA User Manual

    International Nuclear Information System (INIS)

    Tereshchenko, M. A.; Castejon, F.; Cappa, A.

    2008-01-01

    The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs

  14. Netbooks The Missing Manual

    CERN Document Server

    Biersdorfer, J

    2009-01-01

    Netbooks are the hot new thing in PCs -- small, inexpensive laptops designed for web browsing, email, and working with web-based programs. But chances are you don't know how to choose a netbook, let alone use one. Not to worry: with this Missing Manual, you'll learn which netbook is right for you and how to set it up and use it for everything from spreadsheets for work to hobbies like gaming and photo sharing. Netbooks: The Missing Manual provides easy-to-follow instructions and lots of advice to help you: Learn the basics for using a Windows- or Linux-based netbookConnect speakers, printe

  15. Security electronics circuits manual

    CERN Document Server

    MARSTON, R M

    1998-01-01

    Security Electronics Circuits Manual is an invaluable guide for engineers and technicians in the security industry. It will also prove to be a useful guide for students and experimenters, as well as providing experienced amateurs and DIY enthusiasts with numerous ideas to protect their homes, businesses and properties.As with all Ray Marston's Circuits Manuals, the style is easy-to-read and non-mathematical, with the emphasis firmly on practical applications, circuits and design ideas. The ICs and other devices used in the practical circuits are modestly priced and readily available ty

  16. RELAP-7 Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Berry, Ray Alden [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zou, Ling [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Peterson, John William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Martineau, Richard Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kadioglu, Samet Yucel [Idaho National Lab. (INL), Idaho Falls, ID (United States); Andrs, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    This document summarizes the physical models and mathematical formulations used in the RELAP-7 code. In summary, the MOOSE based RELAP-7 code development is an ongoing effort. The MOOSE framework enables rapid development of the RELAP-7 code. The developmental efforts and results demonstrate that the RELAP-7 project is on a path to success. This theory manual documents the main features implemented into the RELAP-7 code. Because the code is an ongoing development effort, this RELAP-7 Theory Manual will evolve with periodic updates to keep it current with the state of the development, implementation, and model additions/revisions.

  17. Tracer manual on crops and soils

    International Nuclear Information System (INIS)

    1976-01-01

    The manual serves as a reference for agricultural scientists planning to use nuclear techniques. Training courses are held at various locations with different staff. The existence of a laboratory training manual is helpful to organizers, visiting lecturers, demonstrators and participants. It was primarily written for soil scientists from developing countries participating in training courses on the use of isotopes and radiation in soil-water-plant relations research. The training courses are designed to give soil scientists the basic terms and principles necessary for understanding ionizing radiation, its detection and measurement, its associated hazards and most of the more common applications. Due consideration is also given to the detection of stable isotopes and providing a clear understanding of their potential in research on crops and soils. Each experiment included this revised and updated manual (see IAEA Technical Reports Series No. 29: The Laboratory Training Manual on the Use of Isotopes and Radiation in Soil-Plant Relations Research, published in 1964) has been performed and tested for suitability in training courses. To facilitate the task of organizers in preparing for and planning the programmes of training courses, detailed information is provided on each experiment, indicating the time required for its performance and the necessary equipment, glassware, isotopes, chemicals, etc. A comprehensive glossary is included so that scientists may easily understand terms, units and expressions commonly used in this work. The glossary may also serve as an index since it includes the page number referring to the first mention of the term or expression

  18. [Quality of health care, accreditation, and health technology assessment in Croatia: role of agency for quality and accreditation in health].

    Science.gov (United States)

    Mittermayer, Renato; Huić, Mirjana; Mestrović, Josipa

    2010-12-01

    Avedis Donabedian defined the quality of care as the kind of care, which is expected to maximize an inclusive measure of patient welfare, after taking into account the balance of expected gains and losses associated with the process of care in all its segments. According to the World Medical Assembly, physicians and health care institutions have an ethical and professional obligation to strive for continuous quality improvement of services and patient safety with the ultimate goal to improve both individual patient outcomes as well as population health. Health technology assessment (HTA) is a multidisciplinary process that summarizes information about the medical, social, economic and ethical issues related to the use of a health technology in a systematic, transparent, unbiased, robust manner, with the aim to formulate safe and effective health policies that are patient focused and seek to achieve the highest value. The Agency for Quality and Accreditation in Health was established in 2007 as a legal, public, independent, nonprofit institution under the Act on Quality of Health Care. The Agency has three departments: Department of Quality and Education, Department of Accreditation, and Department of Development, Research, and Health Technology Assessment. According to the Act, the Agency should provide the procedure of granting, renewal and cancellation of accreditation of healthcare providers; proposing to the Minister, in cooperation with professional associations, the plan and program for healthcare quality assurance, improvement, promotion and monitoring; proposing the healthcare quality standards as well as the accreditation standards to the Minister; keeping a register of accreditations and providing a database related to accreditation, healthcare quality improvement, and education; providing education in the field of healthcare quality assurance, improvement and promotion; providing the HTA procedure and HTA database, supervising the healthcare insurance

  19. The contested space: The impact of competency-based education and accreditation on dietetic practice in Australia.

    Science.gov (United States)

    Ash, Susan; Palermo, Claire; Gallegos, Danielle

    2018-05-06

    Competency-based Education (CBE) has underpinned the education of dietitians in Australia since the first Competency Standards (CS) were published; however, little is known about how CBE has influenced dietetic practice. The aim of this paper is to explore how a CBE framework and the CS have influenced dietetic practice in Australia since 1990. A qualitative investigation explored concepts of dietetic practice. Data analysed were original interviews previously undertaken with recent graduate dietitians during 1991 (n = 26), 1998 (n = 23) and 2007 (n = 19) and seven guided discussions with dietitians and employers (n = 28) conducted in 2014 to identify themes. The DAA Competency Standards and Accreditation Manuals/Standards since 1990 were also analysed to triangulate the interview data and to investigate how the CS were interpreted. Themes identified from interviews included: (i) communicating for better care, (ii) scientific enquiry for effective practice, (iii) critical thinking and evidence-based practice and (iv) professionalism, which remained core to dietetic practice over time, but leadership, advocacy, business management and entrepreneurial skills have emerged more strongly as the scope of practice has diversified. The landscape in which dietitians' practice showed increasing complexity and clear boundaries separating professional roles were disappearing. The 2015 CS and the 2017 Accreditation Standards highlighted that competency remains a shifting construct and that professional behaviours change depending on economic and political reasons in the play of power. Accreditation policy and current standards have successfully maintained a standard of dietetic practice across a diverse country but have the potential to constrain innovation. © 2018 Dietitians Association of Australia.

  20. Accreditation of Individualized Quality Control Plans by the College of American Pathologists.

    Science.gov (United States)

    Hoeltge, Gerald A

    2017-03-01

    The Laboratory Accreditation Program of the College of American Pathologists (CAP) began in 2015 to allow accredited laboratories to devise their own strategies for quality control of laboratory testing. Participants now have the option to implement individualized quality control plans (IQCPs). Only nonwaived testing that features an internal control (built-in, electronic, or procedural) is eligible for IQCP accreditation. The accreditation checklists that detail the requirements have been peer-reviewed by content experts on CAP's scientific resource committees and by a panel of accreditation participants. Training and communication have been key to the successful introduction of the new IQCP requirements. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. The Effect of Flipped Model of Instruction on EFL Learners' Reading Comprehension: Learners' Attitudes in Focus

    Science.gov (United States)

    Karimi, Mehrnoosh; Hamzavi, Raouf

    2017-01-01

    The present study aimed at investigating the effect of flipped model of instruction on EFL learners' reading comprehension ability. Moreover, this study aimed at identifying EFL students' attitudes toward flipped model of instruction. To this end, 60 EFL learners studying at an accredited private language institute in Isfahan were first…

  2. Public health accreditation and metrics for ethics: a case study on environmental health and community engagement.

    Science.gov (United States)

    Bernheim, Ruth Gaare; Stefanak, Matthew; Brandenburg, Terry; Pannone, Aaron; Melnick, Alan

    2013-01-01

    As public health departments around the country undergo accreditation using the Public Health Accreditation Board standards, the process provides a new opportunity to integrate ethics metrics into day-to-day public health practice. While the accreditation standards do not explicitly address ethics, ethical tools and considerations can enrich the accreditation process by helping health departments and their communities understand what ethical principles underlie the accreditation standards and how to use metrics based on these ethical principles to support decision making in public health practice. We provide a crosswalk between a public health essential service, Public Health Accreditation Board community engagement domain standards, and the relevant ethical principles in the Public Health Code of Ethics (Code). A case study illustrates how the accreditation standards and the ethical principles in the Code together can enhance the practice of engaging the community in decision making in the local health department.

  3. The attitude of health care professionals towards accreditation: A systematic review of the literature

    Directory of Open Access Journals (Sweden)

    Abdullah Alkhenizan

    2012-01-01

    Full Text Available Accreditation is usually a voluntary program, in which authorized external peer reviewers evaluate the compliance of a health care organization with pre-established performance standards. The aim of this study was to systematically review the literature of the attitude of health care professionals towards professional accreditation. A systematic search of four databases including Medline, Embase, Healthstar, and Cinhal presented seventeen studies that had evaluated the attitudes of health care professionals towards accreditation. Health care professionals had a skeptical attitude towards accreditation. Owners of hospitals indicated that accreditation had the potential of being used as a marketing tool. Health care professionals viewed accreditation programs as bureaucratic and demanding. There was consistent concern, especially in developing countries, about the cost of accreditation programs and their impact on the quality of health care services.

  4. Employer and Promoter Perspectives on the Quality of Health Promotion Within the Healthy Workplace Accreditation

    Science.gov (United States)

    Tung, Chen-Yin; Yin, Yun-Wen; Liu, Chia-Yun; Chang, Chia-Chen; Zhou, Yi-Ping

    2017-01-01

    Objectives: To explore the employers’ and promoters’ perspective of health promotion quality according to the healthy workplace accreditation. Methods: We assessed the perspectives of 85 employers and 81 health promoters regarding the quality of health promotion at their workplaces. The method of measurement referenced the European Network for Workplace Health Promotion (ENWHP) quality criteria. Results: In the large workplaces, the accredited corporation employers had a higher impression (P workplace employers had a slightly higher perspective than non-accredited ones. Nevertheless, there were no differences between the perspectives of health promoters from different sized workplaces with or without accreditation (P > 0.05). Conclusions: It seems that employers’ perspectives of healthy workplace accreditation surpassed employers from non-accredited workplaces. Specifically, large accredited corporations could share their successful experiences to encourage a more involved workplace in small–medium workplaces. PMID:28691998

  5. Nuclear electronics laboratory manual

    International Nuclear Information System (INIS)

    1984-05-01

    The Nuclear Electronics Laboratory Manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. The manual does not include experiments of a basic nature, such as characteristics of different active electronics components. It starts by introducing small electronics blocks, employing one or more active components. The most demanding exercises instruct a student in the design and construction of complete circuits, as used in commercial nuclear instruments. It is expected that a student who completes all the experiments in the manual should be in a position to design nuclear electronics units and also to understand the functions of advanced commercial instruments which need to be repaired or maintained. The future tasks of nuclear electronics engineers will be increasingly oriented towards designing and building the interfaces between a nuclear experiment and a computer. The manual pays tribute to this development by introducing a number of experiments which illustrate the principles and the technology of interfacing

  6. General Drafting. Technical Manual.

    Science.gov (United States)

    Department of the Army, Washington, DC.

    The manual provides instructional guidance and reference material in the principles and procedures of general drafting and constitutes the primary study text for personnel in drafting as a military occupational specialty. Included is information on drafting equipment and its use; line weights, conventions and formats; lettering; engineering charts…

  7. Manual for subject analysis

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series and also constitutes a part of the ETDE Procedures Manual. It presents the rules, guidelines and procedures to be adopted by centers submitting input to the International Nuclear Information System (INIS) or the Energy Technology Data Exchange (ETDE). It is a manual for the subject analysis part of input preparation, meaning the selection, subject classification, abstracting and subject indexing of relevant publications, and is to be used in conjunction with the Thesauruses, Subject Categories documents and the documents providing guidelines for the preparation of abstracts. The concept and structure of the new manual are intended to describe in a logical and efficient sequence all the steps comprising the subject analysis of documents to be reported to INIS or ETDE. The manual includes new chapters on preparatory analysis, subject classification, abstracting and subject indexing, as well as rules, guidelines, procedures, examples and a special chapter on guidelines and examples for subject analysis in particular subject fields. (g.t.; a.n.)

  8. Aquatic Microbiology Laboratory Manual.

    Science.gov (United States)

    Cooper, Robert C.; And Others

    This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…

  9. IAEA safeguards technical manual

    International Nuclear Information System (INIS)

    1980-02-01

    The necessity for statistical inference procedures arises because of time and cost limitations imposed on inspection activities, and also because of inherent limitations of inspection measurement instruments and techniques. This manual produces statistical concepts and techniques in the field of nuclear material control

  10. Tokai densitometer manual

    International Nuclear Information System (INIS)

    Sprinkle, J.K. Jr.; Hsue, S.T.; Junck, K.

    1987-01-01

    In 1979, the Tokai densitometer was installed at the Tokai Reprocessing Plant in Tokai, Japan. It uses a nondestructive active technique (K-edge absorption densitometry) to assay solutions for plutonium content. The original hardware was upgraded in 1984 and 1985. This manual describes the instrument's operation after the upgrade. 2 refs

  11. Political Education Manual.

    Science.gov (United States)

    League of United Latin American Citizens, Washington, DC.

    Written to help Hispanics understand the electoral process more thoroughly and to encourage them to participate more actively in the political arena, this manual begins by describing the present status of the Hispanic electorate and then explains how laws are made, how Hispanics can influence legislation, and how to organize a voter registration…

  12. Coulometer operator's manual

    International Nuclear Information System (INIS)

    Criscuolo, A.L.

    1977-07-01

    The coulometer control system automates the titration of uranium and plutonium as performed by the CMB-1 group. The system consists of a printer, microcontroller, and coulometer, all of which are controlled by an algorithm stored in the microcontroller read-only memory. This manual describes the titration procedure using the coulometer control system, its theory and maintenance

  13. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-07-25

    The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.

  14. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-09-30

    The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.

  15. ABCC publication manual

    Energy Technology Data Exchange (ETDEWEB)

    1959-01-01

    The reporting policy of the Atomic Bomb Casualty Commission is described in detail in this manual. Specific topics covered are: research project register; research publication policy; USA publication procedures; Japan publication procedures, report preparation instructions; and a glossary of institutions terms, phrases, and symbols. 15 figures. (DMC)

  16. Matematica 3. Manual.

    Science.gov (United States)

    D'Alu, Maria Jose Miranda de Sousa

    This teachers manual accompanies a mathematics textbook, written in Portuguese, for third graders. It closely follows the objectives and methodology of the major curricula used throughout the schools in the United States. The 11 chapters deal with: numeration (0-999,999); addition with and without regrouping; subtraction with and without…

  17. Manual on industrial radiography

    International Nuclear Information System (INIS)

    1981-08-01

    This manual is intended as a source of educational material to personnel seeking certification as industrial radiographers, and as a guide and reference text for educational organizations that are providng courses in industrial radiography. It covers the basic principles of x-ray and gamma radiation, radiation safety, films and film processing, welding, casting and forging, aircraft structures and components, radiographic techniques, and records

  18. Idaho Safety Manual.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This manual is intended to help teachers, administrators, and local school boards develop and institute effective safety education as a part of all vocational instruction in the public schools of Idaho. This guide is organized in 13 sections that cover the following topics: introduction to safety education, legislation, levels of responsibility,…

  19. Functional Assessment Inventory Manual.

    Science.gov (United States)

    Crewe, Nancy M.; Athelstan, Gary T.

    This manual, which provides extensive new instructions for administering the Functional Assessment Inventory (FAI), is intended to enable counselors to begin using the inventory without undergoing any special training. The first two sections deal with the need for functional assessment and issues in the development and use of the inventory. The…

  20. Manual Hydraulic Structures

    NARCIS (Netherlands)

    Molenaar, W.F.; Voorendt, M.Z.

    This manual is the result of group work and origins in Dutch lecture notes that have been used since long time. Amongst the employees of the Hydraulic Engineering Department that contributed to this work are dr.ir. S. van Baars, ir.K.G.Bezuijen, ir.G.P.Bourguignon, prof.ir.A.Glerum,

  1. SNL Abuse Testing Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Orendorff, Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lamb, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steele, Leigh Anna Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the FreedomCAR Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND2005-3123).

  2. Sexism in Parenting Manuals

    Science.gov (United States)

    DeFrain, John D.

    1977-01-01

    Parental roles, as delineated in many of the popular parenting manuals on the market, are reviewed and assessed. It is concluded that the vast majority of authors of child-rearing guides implicity or explicitly endorse the traditional roles of father as the dominant breadwinner and mother as the nurturant caretaker. (Author)

  3. Rescue Manual. Module 6.

    Science.gov (United States)

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The sixth of 10 modules contains 4 chapters: (1) industrial rescue; (2) rescue from a confined space; (3) extrication from heavy equipment; and (4) rescue operations involving elevators. Key points, an introduction, and conclusion accompany…

  4. Manually operated coded switch

    International Nuclear Information System (INIS)

    Barnette, J.H.

    1978-01-01

    The disclosure related to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made

  5. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  6. Southern Ductile Training Manual.

    Science.gov (United States)

    Alabama State Dept. of Education, Montgomery.

    This instructor's manual contains the materials required to conduct the competency-based workplace literacy program that was developed to help employees at a foundry that has evolved from a small, family-owned business into a major foundry group with several automated production systems. The workplace literacy program consists of 24 lessons in…

  7. NDS EXFOR Manual

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1979-06-01

    This manual contains the coding rules and formats and NDS internal compilation rules for the exchange format (EXFOR) for the transmission of nuclear reaction data between national and international nuclear data centres, and for the data storage and retrieval system of the IAEA Nuclear Data Section

  8. Consumer Decisions. Student Manual.

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. Div. of Vocational Education.

    This student manual covers five areas relating to consumer decisions. Titles of the five sections are Consumer Law, Consumer Decision Making, Buying a Car, Convenience Foods, and Books for Preschool Children. Each section may contain some or all of these materials: list of objectives, informative sections, questions on the information and answers,…

  9. NACS Store Planning Manual.

    Science.gov (United States)

    College Store Journal, 1979

    1979-01-01

    Topics discussed by the NACS Store Planning/Renovation Committees in this updated version of the college store renovation manual include: short- and long-range planning, financial considerations, professional planning assistance, the store's image and business character, location considerations, building requirements, space requirements, fixtures,…

  10. Default Management Manual.

    Science.gov (United States)

    Dent, Richard A.

    This manual is designed to instruct administrators of the Guaranteed Student Loan (GSL) Program in how to take every step possible to administer the program effectively and to minimize the program costs of serving the high risk student. It shows schools how to work with students throughout their time in school, create ownership of the loan(s) by…

  11. RRFC hardware operation manual

    International Nuclear Information System (INIS)

    Abhold, M.E.; Hsue, S.T.; Menlove, H.O.; Walton, G.

    1996-05-01

    The Research Reactor Fuel Counter (RRFC) system was developed to assay the 235 U content in spent Material Test Reactor (MTR) type fuel elements underwater in a spent fuel pool. RRFC assays the 235 U content using active neutron coincidence counting and also incorporates an ion chamber for gross gamma-ray measurements. This manual describes RRFC hardware, including detectors, electronics, and performance characteristics

  12. CANAL user's manual

    International Nuclear Information System (INIS)

    Faya, A.; Wolf, L.; Todreas, N.

    1979-11-01

    CANAL is a subchannel computer program for the steady-state and transient thermal hydraulic analysis of BWR fuel rod bundles. The purpose of this manual is to introduce the user into the mechanism of running the code by providing information about the input data and options

  13. AELIB user's manual

    International Nuclear Information System (INIS)

    Evans, L.E.; Klawitter, G.L.

    1981-05-01

    This report is an updatable manual for users of AELIB, the AECL Library of FORTRAN-callable routines for the CRNL CDC 6600/CYBER 170 system. It provides general advice on the use of this library and detailed information on the selection and usage of particular library routines

  14. Water Quality Monitoring Manual.

    Science.gov (United States)

    Mason, Fred J.; Houdart, Joseph F.

    This manual is designed for students involved in environmental education programs dealing with water pollution problems. By establishing a network of Environmental Monitoring Stations within the educational system, four steps toward the prevention, control, and abatement of water pollution are proposed. (1) Train students to recognize, monitor,…

  15. Revegetation manual for the environmental restoration contractor

    International Nuclear Information System (INIS)

    McLendon, T.; Redente, E.F.

    1997-02-01

    The purpose of this manual is to provide guidance and general guidelines for the revegetation of remediation waste sites and other disturbed areas on the Hanford Site. Specific revegetation plans will be developed using guidance from this manual. Locations, resources, and funding will dictate the specific revegetation design at each disturbed area. Disturbances have occurred to some of the ecological communities of the Hanford Site. Many of these disturbances are the result of operations of the Hanford Site, including Comprehensive Environmental Response, Compensation, and Liability Act of 1980 waste sites on small portions of the Hanford Site. There were, however, extensive disturbances to the native vegetation prior to operations of the facility. These resulted from cultivation, grazing, fire, and the introduction of exotics. Revegetation planning must take into account these early disturbances, as well as the later ones

  16. Manual on mutation breeding. 2. ed.

    International Nuclear Information System (INIS)

    1977-01-01

    The manual is a compilation of work done on the use of induced mutations in plant breeding, and presents general methods and techniques in this field. The use of chemical mutagens and ionizing radiations (X-rays, gamma rays, α- and β-particles, protons, neutrons) are described as well as the effects of these mutagens. The different types of mutations achieved can be divided into genome mutations, chromosome mutations and extra nuclear mutations. Separate chapters deal with mutation techniques in breeding seed-propagated species and asexually propagated plants (examples of development of cultivars given). Plant characters which can be improved by mutation breeding include yield, ripening time, growth habit, disease resistance and tolerance to environmental factors (temperature, salinity etc.). The use of mutagens for some specific plant breeding problems is discussed and attention is also paid to somatic cell genetics in connection with induced mutations. The manual contains a comprehensive bibliography (60 p. references) and a subject index

  17. Revegetation manual for the environmental restoration contractor

    Energy Technology Data Exchange (ETDEWEB)

    McLendon, T.; Redente, E.F.

    1997-02-01

    The purpose of this manual is to provide guidance and general guidelines for the revegetation of remediation waste sites and other disturbed areas on the Hanford Site. Specific revegetation plans will be developed using guidance from this manual. Locations, resources, and funding will dictate the specific revegetation design at each disturbed area. Disturbances have occurred to some of the ecological communities of the Hanford Site. Many of these disturbances are the result of operations of the Hanford Site, including Comprehensive Environmental Response, Compensation, and Liability Act of 1980 waste sites on small portions of the Hanford Site. There were, however, extensive disturbances to the native vegetation prior to operations of the facility. These resulted from cultivation, grazing, fire, and the introduction of exotics. Revegetation planning must take into account these early disturbances, as well as the later ones.

  18. Hanford Environmental Information System (HEIS) user's manual

    International Nuclear Information System (INIS)

    1991-10-01

    The Hanford Environmental Information System (HEIS) is a consolidated set of automated resources that effectively manage the data gathered during environmental monitoring and restoration of the Hanford Site. The HEIS includes an integrated database that provides consistent and current data to all users and promotes sharing of data by the entire user community. Data stored in the HEIS are collected under several regulatory programs. Currently these include the Comprehensive Environmental Response, Compensation and Liability Act of 1980 (CERCLA); the Resource Conservation and Recovery Act of 1976 (RCRA); and the Ground-Water Environmental Surveillance Project, managed by the Pacific Northwest Laboratory. The HEIS is an information system with an inclusive database. The manual, the HEIS User's Manual, describes the facilities available to the scientist, engineer, or manager who uses the system for environmental monitoring, assessment, and restoration planning; and to the regulator who is responsible for reviewing Hanford Site operations against regulatory requirements and guidelines

  19. SRS Station 2.3 manual

    International Nuclear Information System (INIS)

    Tang, C.; Miller, M.; MacLean, E.

    1998-01-01

    The objective of this manual is to effectively provide assistance to users so that they can perform successful experiments at Station 2.3 during their visits. In order to compile a comprehensive document, the functions of the instrument hardware and software are described in detail. Where appropriate it also contains useful information and other documentation for help and/or reference. In addition, suggestions and instructions are available to overcome problems which inevitably face the users in the performing of complex experimental tasks. This document can provide help as part of the overall user support facility, and it is therefore intended that the manual is readily available in hard copy as well as in electronic form. (author)

  20. Training and Accreditation for Radon Professionals in Sweden

    International Nuclear Information System (INIS)

    Soderman, A. L.

    2003-01-01

    Radon training courses and seminars of different kinds have been arranged in Sweden since the early 1980s. A commercial educational company initiated the first regular training courses in 1987. Up to 1990 about 400 persons had attended courses in radon measurement and radon mitigation methods. In 1991 the first in a series of courses focussed on radon from the ground and production of radon risk maps organised. From 1991 it has been possible to obtain accreditation for measurements of indoor radon in Sweden and from 1997 also for measurements of radon in water. Even if accreditation s is voluntary, in Sweden accredited laboratories perform most measurements, both for indoor air and water. A condition for accreditation in to have passed the examination following the training courses at SSI, SO far, three major companies have obtained accreditation for measurement of indoor radon and four have been accredited for measurements of radon in water. Education on radon is also given at universities and institutes of technology. A two-day course is included in the education for environmental health officers. A number of training courses aimed at real state agents have been organised by SSI through the years. During the autumn of 2001 altogether 400 authorised real estate agents attended a series of regional half-day courses. In 1995 SSI arranged an international training course, Radon Indoor Risk and Remedial Actions, in Stockholm for the European commission. About 40 scientists from all over Europe attended the course, which much appreciated by the participants. Today SSI's Radon Training Programme comprises five different courses, a Basic radon Course and four continuation courses: Radon measurements, Radon remedial measures, Radon in water and Radon investigation and risk map production. The courses are arranged twice a year, in spring and autumn, except the Radon risk map production course, which is arranged about every second year. Altogether, between 1991 and 2003

  1. Environmental engineering education: examples of accreditation and quality assurance

    Science.gov (United States)

    Caporali, E.; Catelani, M.; Manfrida, G.; Valdiserri, J.

    2013-12-01

    Environmental engineers respond to the challenges posed by a growing population, intensifying land-use pressures, natural resources exploitation as well as rapidly evolving technology. The environmental engineer must develop technically sound solutions within the framework of maintaining or improving environmental quality, complying with public policy, and optimizing the utilization of resources. The engineer provides system and component design, serves as a technical advisor in policy making and legal deliberations, develops management schemes for resources, and provides technical evaluations of systems. Through the current work of environmental engineers, individuals and businesses are able to understand how to coordinate society's interaction with the environment. There will always be a need for engineers who are able to integrate the latest technologies into systems to respond to the needs for food and energy while protecting natural resources. In general, the environment-related challenges and problems need to be faced at global level, leading to the globalization of the engineering profession which requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. In this framework, the Europe-based EUR ACE (European Accreditation of Engineering Programmes) system, currently operated by ENAEE - European Network for Accreditation of Engineering Education can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. The application of the accreditation model EUR-ACE, and of the National Italian Degree Courses Accreditation System, promoted by the Italian National Agency for the Evaluation of Universities and Research Institutes (ANVUR), to the Environmental Engineering Degree Courses at the University of Firenze is presented. In

  2. 22 CFR 96.93 - Reports to the Secretary about accredited agencies and approved persons and their activities.

    Science.gov (United States)

    2010-04-01

    ... INTERCOUNTRY ADOPTION ACT OF 2000 (IAA) Dissemination and Reporting of Information by Accrediting Entities § 96...) The accrediting entity must make annual reports to the Secretary on the information it collects from accredited agencies and approved persons pursuant to § 96.43. The accrediting entity must make semi-annual...

  3. The design of operating procedures manuals for nuclear power plants

    International Nuclear Information System (INIS)

    Bohr, E.; Preuss, W.; Reinartz, G.; Thau, G.

    1977-03-01

    This report describes the findings of a research on the desirable design of operating procedures manuals for nuclear power plants. The work was supported by a grant of the Federal Department of the Interior. Information was acquired from different sources. Interviews and discussions on manual design were carried out with manual users in nuclear power plants. Moreover, tasks carried out using procedures were either observed or, alternatively, the manner of using procedures was elicited by interviews. In addition, manual writers, managers from manufacturers and utilities, nuclear experts, and individuals involved in manual specification activities were interviewed. A major source of information has been the pertinent scientific and technical findings scattered in the literature on topics such as instructional technology, engineering psychology, psycholinguistics, and typography. A comprehensive bibliography is included. General rules are established on designing instructional material for use on the job, aiming at increasing their legability, comprehensibility, and suitability to guide human performance. The application of these rules to the design of individual operating procedures is demonstrated. Recommendations are given on the design, layout, development and implementation of manuals. (orig.) [de

  4. Missouri Highway Safety Manual Recalibration

    Science.gov (United States)

    2018-05-01

    The Highway Safety Manual (HSM) is a national manual for analyzing the highway safety of various facilities, including rural roads, urban arterials, freeways, and intersections. The HSM was first published in 2010, and a 2014 supplement addressed fre...

  5. Developing a Pupil Transportation Manual.

    Science.gov (United States)

    Douglas, Dave

    1987-01-01

    District-level pupil transportation manuals that contain clear, concise information about objectives, policies, and regulations are a must. These manuals should also specify procedures concerning evaluation processes, personnel recruitment and selection, and the driver training program. (MLH)

  6. High-dose secondary calibration laboratory accreditation program

    Energy Technology Data Exchange (ETDEWEB)

    Humphreys, J.C. [National Institute of Standards and Technology, Gaithersburg, MD (United States)

    1993-12-31

    There is a need for high-dose secondary calibration laboratories to serve the multi-billion dollar radiation processing industry. This need is driven by the desires of industry for less costly calibrations and faster calibration-cycle response time. Services needed include calibration irradiations of routine processing dosimeters and the supply of reference standard transfer dosimeters for irradiation in the production processing facility. In order to provide measurement quality assurance and to demonstrate consistency with national standards, the high-dose secondary laboratories would be accredited by means of an expansion of an existing National Voluntary Laboratory Accreditation Program. A laboratory performance criteria document is under development to implement the new program.

  7. High-dose secondary calibration laboratory accreditation program

    International Nuclear Information System (INIS)

    Humphreys, J.C.

    1993-01-01

    There is a need for high-dose secondary calibration laboratories to serve the multi-billion dollar radiation processing industry. This need is driven by the desires of industry for less costly calibrations and faster calibration-cycle response time. Services needed include calibration irradiations of routine processing dosimeters and the supply of reference standard transfer dosimeters for irradiation in the production processing facility. In order to provide measurement quality assurance and to demonstrate consistency with national standards, the high-dose secondary laboratories would be accredited by means of an expansion of an existing National Voluntary Laboratory Accreditation Program. A laboratory performance criteria document is under development to implement the new program

  8. A student's manual for A first course in general relativity

    CERN Document Server

    Scott, Robert B

    2016-01-01

    This comprehensive student manual has been designed to accompany the leading textbook by Bernard Schutz, A First Course in General Relativity, and uses detailed solutions, cross-referenced to several introductory and more advanced textbooks, to enable self-learners, undergraduates and postgraduates to master general relativity through problem solving. The perfect accompaniment to Schutz's textbook, this manual guides the reader step-by-step through over 200 exercises, with clear easy-to-follow derivations. It provides detailed solutions to almost half of Schutz's exercises, and includes 125 brand new supplementary problems that address the subtle points of each chapter. It includes a comprehensive index and collects useful mathematical results, such as transformation matrices and Christoffel symbols for commonly studied spacetimes, in an appendix. Supported by an online table categorising exercises, a Maple worksheet and an instructors' manual, this text provides an invaluable resource for all students and in...

  9. Emergency preparedness: a comprehensive plan

    International Nuclear Information System (INIS)

    Wilson, R.H.

    1975-01-01

    The Atlantic Richfield Hanford Company (ARHCO) has developed comprehensive plans for coping with emergencies ranging from criticality to civil disturbance. A unique notification system provides for immediate contact with key personnel by using a central communications center, crash alarm warning networks, and a continuing telephone cascade notification system. There is also the capability of immediately contacting other contractor key personnel. Certain jobs have been predetermined as necessary for coping with an emergency. An emergency staff consisting of responsible management, with alternates, has been preselected to automatically fill these jobs when notified. Control centers for headquarters and ''field'' are established with telephone and radio communication capabilities and are also supplied with some source materials to assist initiating plans for containing an emergency for recovery. A comprehensive emergency procedures manual has been developed, which contains information of company-wide application and procedures for specific facilities covering almost all accident situations

  10. Adapting the Accreditation Procedures to a New Educational Technology

    DEFF Research Database (Denmark)

    Cojocaru, Dorian; Tudor Tanasie, Razvan; Friesel, Anna

    2017-01-01

    , Technology, Engineering and Math (STEM) topics, including: technology solutions, infrastructure, activities, assessment, curricula, and classroom furniture and environment designs. The project addresses three different learning contexts (post-secondary design studios, post-secondary engineering sciences...... classrooms, and secondary-level high school STEM learning environments) across four national settings in the EU. In the upper defined context, this paper deals with the problem of adapting the accreditation of the engineering programs to the new educational technologies....

  11. Adapting the Accreditation Procedures to a New Educational Technology

    DEFF Research Database (Denmark)

    Cojocaru, Dorian; Tudor Tanasie, Razvan; Friesel, Anna

    2016-01-01

    , Technology, Engineering and Math (STEM) topics, including: technology solutions, infrastructure, activities, assessment, curricula, and classroom furniture and environment designs. The project addresses three different learning contexts (post-secondary design studios, post-secondary engineering sciences...... classrooms, and secondary-level high school STEM learning environments) across four national settings in the EU. In the upper defined context, this paper deals with the problem of adapting the accreditation of the engineering programs to the new educational technologies....

  12. Accredited dose measurements for validation of radiation sterilized products

    DEFF Research Database (Denmark)

    Miller, A.

    1993-01-01

    for control of radiation sterilization. The accredited services include: 1. 1. Irradiation of dosimeters and test samples with cobalt-60 gamma rays. 2. 2. Irradiation of dosimeters and test samples with 10 MeV electrons. 3. 3. Issue of and measurement with calibrated dosimeters. 4. 4. Measurement...... of the dosimetric parameters of an irradiation facility. 5. 5. Measurement of absorbed dose distribution in irradiated products. The paper describes these services and the procedures necessary for their execution....

  13. Audit experience in external individual monitoring services accreditation in Brazil

    International Nuclear Information System (INIS)

    Martins, M.M.; Fonseca, E.S.; Pereira, W.W.; Ramos, M.M.O.; Salati, I.P.A.

    1998-01-01

    Brazilian Nuclear Energy Commission (CNEN) has been carrying out an accreditation program for the External Individual Monitoring Services (named SMIE) for about 45.000 workers involved with ionizing radiation. One of this steps of this accreditation program is the audit to each SMIE. The main audit objective is to verify and to check organizational documentation, system performance test, technical personnel ability and training, quality assurance system procedures and records, essential equipment and facilities and reliability of dose reports. In order to avoid a different audit for each SMIE, effort were made to obtain a standard process. Two aspects were considered the most relevant ones: human resources training and audit procedures. To achieve the first one, a practical and theoretical course taking into account auditing needs was elaborated. As well as experience in one of the technical related areas, an important condition to be member of an audit team is to obtain satisfactory approval in one of the offered courses. In order to accomplish the second point, a set of documents was implemented such as an audit checklist, audit report models, and procedures and recommendations to audit. Up to February 1998, 12 accreditation audits were performed. The main points of this program as well as an assessment of its difficulties and success are reported in this work

  14. [Fundamental aspects for accrediting medical equipment calibration laboratories in Colombia].

    Science.gov (United States)

    Llamosa-Rincón, Luis E; López-Isaza, Giovanni A; Villarreal-Castro, Milton F

    2010-02-01

    Analysing the fundamental methodological aspects which should be considered when drawing up calibration procedure for electro-medical equipment, thereby permitting international standard-based accreditation of electro-medical metrology laboratories in Colombia. NTC-ISO-IEC 17025:2005 and GTC-51-based procedures for calibrating electro-medical equipment were implemented and then used as patterns. The mathematical model for determining the estimated uncertainty value when calibrating electro-medical equipment for accreditation by the Electrical Variable Metrology Laboratory's Electro-medical Equipment Calibration Area accredited in compliance with Superintendence of Industry and Commerce Resolution 25771 May 26th 2009 consists of two equations depending on the case; they are: E = (Ai + sigmaAi) - (Ar + sigmaAr + deltaAr1) and E = (Ai + sigmaAi) - (Ar + sigmaA + deltaAr1). The mathematical modelling implemented for measuring uncertainty in the Universidad Tecnológica de Pereira's Electrical Variable Metrology Laboratory (Electro-medical Equipment Calibration Area) will become a good guide for calibration initiated in other laboratories in Colombia and Latin-America.

  15. Accrediting of the OKTA Laboratory - Harmonizing with the European standards

    International Nuclear Information System (INIS)

    Denkovski, Gligor

    2004-01-01

    In the energetics of Republic of Macedonia, after 13 years of independence of the country, there is still chaos in applying of many standards that are not used any more, even in the countries from which they are taken over. Step forward is the applying of the new standards in the oil industry. Control of applying of these standards is still open question. Factory laboratories regardless their equipping are not formally authorized to perform analysis for purposes other than those for their own needs. With establishing of Accrediting Institute of Republic of Macedonia (IARM), and adopting of corresponding regulations, there are conditions for accrediting of laboratories in order of giving services to the State and other users. Subject of this work is accrediting of the laboratory of OKTA - Crude Oil Refinery, Skopje, according the international standard ISO / IEC 17025. Finally this will be beginning of the control of import of crude oil products with suspicious origin and quality, that have been on the Macedonian market for years. (Author)

  16. Occupational safety manual. 4. rev. ed.

    International Nuclear Information System (INIS)

    Skiba, R.

    1979-01-01

    With the rapid technical development and increasing life expectancy, protection against occupational hazards has become a central economic and social problem. Consultants and others responsible for occupational safety should not only be interested in their work but also have sufficient basic knowledge. The complex subject is presented in a simplified and easily comprehensible manner, with particular regard to the practical side. The book is at the same time a textbook for basic training and a reference manual for the working practice. (orig./HP) [de

  17. Manual for JSSL (JAERI scientific subroutine library)

    International Nuclear Information System (INIS)

    Inoue, Shuji; Fujimura, Toichiro; Tsutsui, Tsuneo; Nishida, Takahiko

    1982-09-01

    A manual on revised version of JAERI scientific subroutine library, which is a collection of scientific subroutines developed or modified in JAERI. They are classified into fifteen fields (Special Functions, Linear Problems, Eigenvalue and Eigen vector Problems, Non linear Problems, Mathematical Programming, Extreme Value Problems, Transformations, Functional Approximation Methods, Numerical Differential and Integral Methods, Numerical Differential and Integral Equations, Statistical Functions, Physical Problems, I/O Routines, Plotter Routines, Computer System Functions and Others). Main expansion of this version is in the fields of mathematical programming and statistical functions. The present library may be said to be a comprehensive compilation of scientific subroutines covering almost all the important fields. (author)

  18. Impact of Accreditation Actions: A Case Study of Two Colleges within Western Association of Schools and Colleges' Accrediting Commission for Community and Junior Colleges

    Science.gov (United States)

    Patel, Dipte D.

    2012-01-01

    The United States is unique with it non-governmental peer-review based accreditation system for oversight of higher education for quality assurance and improvement. In a triad relationship with federal and state governments for accountability, accreditation associations are the designated gatekeeper for federal financial assistance. Therefore,…

  19. NDS EXFOR manual

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1996-01-01

    EXFOR is the agreed exchange format for the transmission of nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. The IAEA Nuclear Data Section uses the EXFOR system not only for the center-to-center data exchange but also as its data storage and retrieval system. This NDS EXFOR MANUAL therefore contains the agreed EXFOR coding rules and format, supplemented by NDS internal compilation rules. The EXFOR system and the EXFOR nuclear data library with several million data records originate from the cooperation of an increasing number of data centers whose names and addresses can be found inside the Manual. Their contributions and cooperative efforts are gratefully acknowledged. (author)

  20. Radiation protection manual

    International Nuclear Information System (INIS)

    Spang, A.

    1983-01-01

    According to the Radiation Protection Ordinance, radiation protection experts directing or supervising the handling of radioactive materials must have expert knowledge. The concept of expert knowledge has been clearly defined by the Fachverband e.V. in a catalogue of instruction goals. The manual follows the principles of this catalogue; it presents the expert knowledge required in a total of 15 subject groups. There is an index which helps the reader to find his specific subject group and the knowledge required of him in this subject group. However, the manual gives only an outline of the subject matter in many instances and should therefore not be regarded as a textbook in the proper sense. (orig./HP) [de

  1. REBA experimenters' manual

    International Nuclear Information System (INIS)

    Schuch, R.L.

    1977-04-01

    The REBA is a high-energy, pulsed electron beam or bremsstrahlung x-ray generator whose operational purpose is to provide an energy source of short duration for conducting experiments, primarily to determine material responses to rapid surface and in-depth deposition of energy. The purpose of this manual is to serve as a basic source of information for prospective users of REBA. Included is a brief discussion of the design and operation of the facility as well as a summary of output characteristics for electron beam modes and environmental data for x-ray operation. The manual also contains a description of the REBA experimental facilities, including geometry of the test cell, instrumentation and data collection capabilities, and services and support available to experimenters

  2. The environmental survey manual

    International Nuclear Information System (INIS)

    1987-08-01

    The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

  3. NDS EXFOR manual

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1985-08-01

    EXFOR is the agreed exchange format for the transmission of nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. The IAEA Nuclear Data Section uses the EXFOR system not only for the center-to-center data exchange but also as its data storage and retrieval system. This NDS EXFOR MANUAL therefore contains the agreed EXFOR coding rules and format, supplemented by NDS internal compilation rules. The EXFOR system and the EXFOR nuclear data library with several million data records originate from the cooperation of an increasing number of data centers whose names and addresses can be found inside the Manual. Their contributions and cooperative efforts are gratefully acknowledged. (author)

  4. MINTEQ user's manual

    International Nuclear Information System (INIS)

    Peterson, S.R.; Hostetler, C.J.; Deutsch, W.J.; Cowan, C.E.

    1987-02-01

    This manual will aid the user in applying the MINTEQ geochemical computer code to model aqueous solutions and the interactions of aqueous solutions with hypothesized assemblages of solid phases. The manual will provide a basic understanding of how the MINTEQ computer code operates and the important principles that are incorporated into the code and instruct a user of the MINTEQ code on how to create input files to simulate a variety of geochemical problems. Chapters 2 through 8 are for the user who has some experience with or wishes to review the principles important to geochemical computer codes. These chapters include information on the methodology MINTEQ uses to incorporate these principles into the code. Chapters 9 through 11 are for the user who wants to know how to create input data files to model various types of problems. 35 refs., 2 figs., 5 tabs

  5. Auxiliary mine ventilation manual

    International Nuclear Information System (INIS)

    Workplace Safety North

    2010-01-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  6. Auxiliary mine ventilation manual

    Energy Technology Data Exchange (ETDEWEB)

    Workplace Safety North

    2010-07-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  7. The Emergence of Hospital Accreditation Programs in East Africa: Lessons from Uganda, Kenya, and Tanzania

    Directory of Open Access Journals (Sweden)

    Jeffrey Lane

    2014-01-01

    Full Text Available The objective of this manuscript was to examine existing hospital accreditation systems in three East African countries (Uganda, Kenya and Tanzania, assess attitudes and opinions of key stakeholders regarding hospital accreditation systems in the region, and identify lessons regarding sustainable and effective implementation of hospital accreditation systems in resource-limited countries. National hospital accreditation systems were found in Kenya and Tanzania. Uganda’s accreditation system, known as Yellow Star, had been suspended. Attitudes and opinions of key stakeholders almost unanimously supported the idea of establishing new national hospital accreditation programs, but opinions differed regarding whether that system should be operated by the government or a private independent organization. Our analysis supports the following lessons regarding accreditation systems in the region: (1 self-funding mechanisms are critical to long-term success; (2 external assessments occurred more frequently in our focus countries than accreditation systems in developed countries; (3 Kenya has established framework for providing financial incentives to highly performing hospitals, but these links need to be strengthened; and (4 automatic accreditation of governmental health facilities in Kenya and Tanzania illustrate the potential hazard of public authorities overseeing accreditation programs.

  8. The Emergence of Hospital Accreditation Programs in East Africa: Lessons from Uganda, Kenya, and Tanzania

    Directory of Open Access Journals (Sweden)

    Jeffrey Lane

    2014-03-01

    Full Text Available The objective of this manuscript was to examine existing hospital accreditation systems in three East African countries (Uganda, Kenya and Tanzania, assess attitudes and opinions of key stakeholders regarding hospital accreditation systems in the region, and identify lessons regarding sustainable and effective implementation of hospital accreditation systems in resource-limited countries. National hospital accreditation systems were found in Kenya and Tanzania. Uganda’s accreditation system, known as Yellow Star, had been suspended. Attitudes and opinions of key stakeholders almost unanimously supported the idea of establishing new national hospital accreditation programs, but opinions differed regarding whether that system should be operated by the government or a private independent organization. Our analysis supports the following lessons regarding accreditation systems in the region: (1 self--‐funding mechanisms are critical to long-term success; (2 external assessments occurred more frequently in our focus countries than accreditation systems in developed countries; (3 Kenya has established framework for providing financial incentives to highly performing hospitals, but these links need to be strengthened; and (4 automatic accreditation of governmental health facilities in Kenya and Tanzania illustrate the potential hazard of public authorities overseeing accreditation programs.

  9. NV/YMP radiological control manual, Revision 2

    International Nuclear Information System (INIS)

    Gile, A.L.

    1996-11-01

    The Nevada Test Site (NTS) and the adjacent Yucca Mountain Project (YMP) are located in Nye County, Nevada. The NTS has been the primary location for testing nuclear explosives in the continental US since 1951. Current activities include operating low-level radioactive and mixed waste disposal facilities for US defense-generated waste, assembly/disassembly of special experiments, surface cleanup and site characterization of contaminated land areas, and non-nuclear test operations such as controlled spills of hazardous materials at the hazardous Materials (HAZMAT) Spill Center (HSC). Currently, the major potential for occupational radiation exposure is associated with the burial of low-level nuclear waste and the handling of radioactive sources. Planned future remediation of contaminated land areas may also result in radiological exposures. The NV/YMP Radiological Control Manual, Revision 2, represents DOE-accepted guidelines and best practices for implementing Nevada Test Site and Yucca Mountain Project Radiation Protection Programs in accordance with the requirements of Title 10 Code of Federal Regulations Part 835, Occupational Radiation Protection. These programs provide protection for approximately 3,000 employees and visitors annually and include coverage for the on-site activities for both personnel and the environment. The personnel protection effort includes a DOE Laboratory Accreditation Program accredited dosimetry and personnel bioassay programs including in-vivo counting, routine workplace air sampling, personnel monitoring, and programmatic and job-specific As Low as Reasonably Achievable considerations

  10. NV/YMP radiological control manual, Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    Gile, A.L. [comp.

    1996-11-01

    The Nevada Test Site (NTS) and the adjacent Yucca Mountain Project (YMP) are located in Nye County, Nevada. The NTS has been the primary location for testing nuclear explosives in the continental US since 1951. Current activities include operating low-level radioactive and mixed waste disposal facilities for US defense-generated waste, assembly/disassembly of special experiments, surface cleanup and site characterization of contaminated land areas, and non-nuclear test operations such as controlled spills of hazardous materials at the hazardous Materials (HAZMAT) Spill Center (HSC). Currently, the major potential for occupational radiation exposure is associated with the burial of low-level nuclear waste and the handling of radioactive sources. Planned future remediation of contaminated land areas may also result in radiological exposures. The NV/YMP Radiological Control Manual, Revision 2, represents DOE-accepted guidelines and best practices for implementing Nevada Test Site and Yucca Mountain Project Radiation Protection Programs in accordance with the requirements of Title 10 Code of Federal Regulations Part 835, Occupational Radiation Protection. These programs provide protection for approximately 3,000 employees and visitors annually and include coverage for the on-site activities for both personnel and the environment. The personnel protection effort includes a DOE Laboratory Accreditation Program accredited dosimetry and personnel bioassay programs including in-vivo counting, routine workplace air sampling, personnel monitoring, and programmatic and job-specific As Low as Reasonably Achievable considerations.

  11. Quality Improvement and Performance Management Benefits of Public Health Accreditation: National Evaluation Findings.

    Science.gov (United States)

    Siegfried, Alexa; Heffernan, Megan; Kennedy, Mallory; Meit, Michael

    To identify the quality improvement (QI) and performance management benefits reported by public health departments as a result of participating in the national, voluntary program for public health accreditation implemented by the Public Health Accreditation Board (PHAB). We gathered quantitative data via Web-based surveys of all applicant and accredited public health departments when they completed 3 different milestones in the PHAB accreditation process. Leadership from 324 unique state, local, and tribal public health departments in the United States. Public health departments that have achieved PHAB accreditation reported the following QI and performance management benefits: improved awareness and focus on QI efforts; increased QI training among staff; perceived increases in QI knowledge among staff; implemented new QI strategies; implemented strategies to evaluate effectiveness and quality; used information from QI processes to inform decision making; and perceived achievement of a QI culture. The reported implementation of QI strategies and use of information from QI processes to inform decision making was greater among recently accredited health departments than among health departments that had registered their intent to apply but not yet undergone the PHAB accreditation process. Respondents from health departments that had been accredited for 1 year reported higher levels of staff QI training and perceived increases in QI knowledge than those that were recently accredited. PHAB accreditation has stimulated QI and performance management activities within public health departments. Health departments that pursue PHAB accreditation are likely to report immediate increases in QI and performance management activities as a result of undergoing the PHAB accreditation process, and these benefits are likely to be reported at a higher level, even 1 year after the accreditation decision.

  12. Laboratory biosafety manual

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    This book is in three sections; basic standards of laboratory design and equipment; procedures for safe laboratory practice; and the selection and use of essential biosafety equipment. The intention is that the guidance given in the book should have a broad basis and international application, and that it should be a source from which manuals applicable to local and special conditions can be usefully derived.

  13. Oil trading manual

    International Nuclear Information System (INIS)

    Long, D.

    1995-01-01

    This manual provides basic information on all aspects of oil trading. Topics reviewed in Part 1 include physical characteristics and refining and oil pricing arrangements. Part 2 on instruments and markets contains chapters on crude oil markets, product markets, forward and futures contracts, forward paper markets, oil future exchanges, options, swaps and long term oil markets. Part 3 deals with administration and has chapters on operations and logistics, credit control, accounting, taxation of oil trading, contracts and legal and regulatory issues. (UK)

  14. Manual of Radiation Protection

    International Nuclear Information System (INIS)

    Gambini, D.J.; Granier, R.; Boisserie, G.

    1992-01-01

    This manual explains the principles and practice of radiation protection for those whose work in research, in the field of medicine or in the industry requires the use of radiation sources. It provides the information radiation users need to protect themselves and others and to understand and comply with international recommendations, regulations and legislation regarding the use of radionuclides and radiation machines. It is designed to teach a wide audience of doctors, biologists, research scientists, technicians, engineers, students and others

  15. IAC user manual

    Science.gov (United States)

    Vos, R. G.; Beste, D. L.; Gregg, J.

    1984-01-01

    The User Manual for the Integrated Analysis Capability (IAC) Level 1 system is presented. The IAC system currently supports the thermal, structures, controls and system dynamics technologies, and its development is influenced by the requirements for design/analysis of large space systems. The system has many features which make it applicable to general problems in engineering, and to management of data and software. Information includes basic IAC operation, executive commands, modules, solution paths, data organization and storage, IAC utilities, and module implementation.

  16. Program Management System manual

    International Nuclear Information System (INIS)

    1986-01-01

    The Program Management System (PMS), as detailed in this manual, consists of all the plans, policies, procedure, systems, and processes that, taken together, serve as a mechanism for managing the various subprograms and program elements in a cohesive, cost-effective manner. The PMS is consistent with the requirements of the Nuclear Waste Policy Act of 1982 and the ''Mission Plan for the Civilian Radioactive Waste Management Program'' (DOE/RW-0005). It is based on, but goes beyond, the Department of Energy (DOE) management policies and procedures applicable to all DOE programs by adapting these directives to the specific needs of the Civilian Radioactive Waste Management program. This PMS Manual describes the hierarchy of plans required to develop and maintain the cost, schedule, and technical baselines at the various organizational levels of the Civilian Radioactive Waste Management Program. It also establishes the management policies and procedures used in the implementation of the Program. These include requirements for internal reports, data, and other information; systems engineering management; regulatory compliance; safety; quality assurance; and institutional affairs. Although expanded versions of many of these plans, policies, and procedures are found in separate documents, they are an integral part of this manual. The PMS provides the basis for the effective management that is needed to ensure that the Civilian Radioactive Waste Management Program fulfills the mandate of the Nuclear Waste Policy Act of 1982. 5 figs., 2 tabs

  17. ETAP user's manual

    International Nuclear Information System (INIS)

    Watanabe, Norio; Higuchi, Suminori.

    1990-11-01

    The event tree analysis technique has been used in Probabilistic Safety Assessment for LWRs to delineate various accident scenarios leading to core melt or containment failure and to evaluate their frequencies. This technique often requires manual preparation of event trees with iterative process and time-consuming work in data handling. For the purpose of reducing manual efforts in event tree analysis, we developed a new software package named ETAP (Event Tree Analysis Supporting Program) for event tree analysis. ETAP is an interactive PC-based program which has the ability to construct, update, document, and quantify event trees. Because of its fast running capability to quantify event trees, use of the EATP program can make it easy to perform the sensitivity studies on a variety of system/containment performance issues. This report provides a user's manual for ETAP, which describes the structure, installation, and use of EATP. This software runs on NEC/PC-9800 or compatible PCs that have a 640 KB memory and MS-DOS 2.11 or higher. (author)

  18. Sodium safety manual

    International Nuclear Information System (INIS)

    Hayes, D.J.; Gardiner, R.L.

    1980-09-01

    The sodium safety manual is based upon more than a decade of experience with liquid sodium at Berkeley Nuclear Laboratories (BNL). It draws particularly from the expertise and experience developed in the course of research work into sodium fires and sodium water reactions. It draws also on information obtained from the UKAEA and other sodium users. Many of the broad principles will apply to other Establishments but much of the detail is specific to BNL and as a consequence its application at other sites may well be limited. Accidents with sodium are at best unpleasant and at worst lethal in an extremely painful way. The object of this manual is to help prevent sodium accidents. It is not intended to give detailed advice on specific precautions for particular situations, but rather to set out the overall strategy which will ensure that sodium activities will be pursued safely. More detail is generally conveyed to staff by the use of local instructions known as Sodium Working Procedures (SWP's) which are not reproduced in this manual although a list of current SWP's is included. Much attention is properly given to the safe design and operation of larger facilities; nevertheless evidence suggests that sodium accidents most frequently occur in small-scale work particularly in operations associated with sodium cleaning and special care is needed in all such cases. (U.K.)

  19. OASIS User Manual

    CERN Document Server

    Bojtar, L

    2009-01-01

    The OASIS system has been operational for years now. After a long development the project has reached a state where the number of features it provides exceeds largely what most of its users knows about. The author felt it was time to write a user manual explaining all the functionality of the viewer application. This document is a user manual, concentrating on the functionality of the viewer from the user’s point of view. There are already documents available on the project’s web site about the technical aspects at http://project-oasis.web.cern.ch/project-oasis/presentations.htm . There was an attempt to produce a tutorial on the viewer, but it didn’t get much further than the table of contents, that however is well thought. The structure of this user manual follows the same principle, the basic and most often used features are grouped together. Advanced or less often used features are described in a separate chapter. There is a second organizational principle, features belong to different levels: chann...

  20. The current status of forensic science laboratory accreditation in Europe.

    Science.gov (United States)

    Malkoc, Ekrem; Neuteboom, Wim

    2007-04-11

    Forensic science is gaining some solid ground in the area of effective crime prevention, especially in the areas where more sophisticated use of available technology is prevalent. All it takes is high-level cooperation among nations that can help them deal with criminality that adopts a cross-border nature more and more. It is apparent that cooperation will not be enough on its own and this development will require a network of qualified forensic laboratories spread over Europe. It is argued in this paper that forensic science laboratories play an important role in the fight against crime. Another, complimentary argument is that forensic science laboratories need to be better involved in the fight against crime. For this to be achieved, a good level of cooperation should be established and maintained. It is also noted that harmonization is required for such cooperation and seeking accreditation according to an internationally acceptable standard, such as ISO/IEC 17025, will eventually bring harmonization as an end result. Because, ISO/IEC 17025 as an international standard, has been a tool that helps forensic science laboratories in the current trend towards accreditation that can be observed not only in Europe, but also in the rest of the world of forensic science. In the introduction part, ISO/IEC 17025 states that "the acceptance of testing and calibration results between countries should be facilitated if laboratories comply with this international standard and if they obtain accreditation from bodies which have entered into mutual recognition agreements with equivalent bodies in other countries using this international standard." Furthermore, it is emphasized that the use of this international standard will assist in the harmonization of standards and procedures. The background of forensic science cooperation in Europe will be explained by using an existing European forensic science network, i.e. ENFSI, in order to understand the current status of forensic

  1. Employer and Promoter Perspectives on the Quality of Health Promotion Within the Healthy Workplace Accreditation.

    Science.gov (United States)

    Tung, Chen-Yin; Yin, Yun-Wen; Liu, Chia-Yun; Chang, Chia-Chen; Zhou, Yi-Ping

    2017-07-01

    To explore the employers' and promoters' perspective of health promotion quality according to the healthy workplace accreditation. We assessed the perspectives of 85 employers and 81 health promoters regarding the quality of health promotion at their workplaces. The method of measurement referenced the European Network for Workplace Health Promotion (ENWHP) quality criteria. In the large workplaces, the accredited corporation employers had a higher impression (P health promoters from different sized workplaces with or without accreditation (P > 0.05). It seems that employers' perspectives of healthy workplace accreditation surpassed employers from non-accredited workplaces. Specifically, large accredited corporations could share their successful experiences to encourage a more involved workplace in small-medium workplaces.

  2. FLEXIBLE SCOPE IN ACCREDITATION - INTRODUCING VAGUENESS OR BETTER EXPRESSION OF SCOPE

    Directory of Open Access Journals (Sweden)

    Miloš Jelić

    2007-09-01

    Full Text Available Historically, laboratory accreditation has been grounded on fixed scope of accreditation to establish precisely and unambiguously the range of tests and calibrations covered by a granted accreditation. By the time elapsed it was noticed that such approach sometimes appears to be restrictive since it constrains new or modified methods to be added to a laboratory's scope, even where competence in this general area has already been demonstrated. Accreditation of a flexible scope places more of the responsibility onto the laboratory itself because it imposes to the laboratory to establish and maintain management system that can control its proposed approach. Flexible scope of accreditation yields benefit to all accreditation stakeholders but, on the other hand, introduces more requiring interpretations of relevant standard clauses and includes the bounds of the scope which are defined in more distinct way.

  3. Quality assurance of medical education in the Netherlands: programme or systems accreditation? [

    Directory of Open Access Journals (Sweden)

    Hillen, Harry F. P.

    2010-04-01

    Full Text Available [english] Accreditation is an instrument that is used worldwide to monitor, maintain and improve the quality of medical education. International standards have been defined to be used in reviewing and evaluating the quality of education. The organization and the process of accreditation of medical education programmes in the Netherlands and in Flanders are described in some detail. Accreditation can be based on the results of a detailed assessment of an educational programme or on an evaluation of the educational system and the organization of the institution in question. The Flemish-Dutch accreditation organization (NAO is moving from programme accreditation towards a combination of programme and systems accreditation. The pros and cons of these two approaches are discussed.

  4. Quality assurance of medical education in the Netherlands: programme or systems accreditation?

    Science.gov (United States)

    Hillen, Harry F P

    2010-01-01

    Accreditation is an instrument that is used worldwide to monitor, maintain and improve the quality of medical education. International standards have been defined to be used in reviewing and evaluating the quality of education. The organization and the process of accreditation of medical education programmes in the Netherlands and in Flanders are described in some detail. Accreditation can be based on the results of a detailed assessment of an educational programme or on an evaluation of the educational system and the organization of the institution in question. The Flemish-Dutch accreditation organization (NAO) is moving from programme accreditation towards a combination of programme and systems accreditation. The pros and cons of these two approaches are discussed.

  5. IAEA publishes first health and safety manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-01-15

    A 'Manual on the Safe Handling of Radioisotopes' was published in English on 15 Dec ember 1958 by the International Atomic Energy Agency. This is a comprehensive handbook of internationally compiled recommendations for users of radioisotopes. It covers organizational, medical and technical aspects of radiation safety practices. It is also the Agency's first technical publication. French, Russian and Spanish editions will appear shortly. The Manual should prove useful to all users of radioisotopes in industry, medicine, research, etc., but is directed mainly to small scale users who may not have access to other sources of information. The recommendations apply only to radioactivity surpassing the limit of 0,002 microcurie concentration per gram of material; or a total activity of more than 0,1 microcuries in the working areas; this limit is based on the most dangerous radioisotopes. The experts state that the limiting level might be higher for less dangerous isotopes, but recommend that all be treated as potentially dangerous. This would have educational value and avoid accidents caused by misidentification. The Manual also stressed that good radiation safety practices depend on effective organization and warns that even very competent workers sometimes ignore or forget important health and safety requirements.

  6. IAEA publishes first health and safety manual

    International Nuclear Information System (INIS)

    1959-01-01

    A 'Manual on the Safe Handling of Radioisotopes' was published in English on 15 Dec ember 1958 by the International Atomic Energy Agency. This is a comprehensive handbook of internationally compiled recommendations for users of radioisotopes. It covers organizational, medical and technical aspects of radiation safety practices. It is also the Agency's first technical publication. French, Russian and Spanish editions will appear shortly. The Manual should prove useful to all users of radioisotopes in industry, medicine, research, etc., but is directed mainly to small scale users who may not have access to other sources of information. The recommendations apply only to radioactivity surpassing the limit of 0,002 microcurie concentration per gram of material; or a total activity of more than 0,1 microcuries in the working areas; this limit is based on the most dangerous radioisotopes. The experts state that the limiting level might be higher for less dangerous isotopes, but recommend that all be treated as potentially dangerous. This would have educational value and avoid accidents caused by misidentification. The Manual also stressed that good radiation safety practices depend on effective organization and warns that even very competent workers sometimes ignore or forget important health and safety requirements

  7. Shaping the Identity of the International Business School : Accreditation as the Road to Success?

    OpenAIRE

    Palmqvist, Monica

    2009-01-01

    Internationalization is an important strategic issue for survival for most business schools of today. Following this, various international accreditation bodies have in recent years been very succes­s­ful in promoting accreditation as a means of gaining status and prove high quality. These business school accreditation schemes clearly state their targets against top quality international schools and programs. Internationalization of the business school opera­tions can thus be stated to be of ...

  8. Hazardous Solvent Substitution Data System reference manual

    International Nuclear Information System (INIS)

    Branham-Haar, K.A.; Twitchell, K.E.

    1993-07-01

    Concern for the environment, in addition to Federal regulation, mandate the replacement of hazardous solvents with safer cleaning agents. Manufacturers are working to produce these replacement solvents. As these products are developed, potential users need to be informed of their availability. To promote the use of these new products instead of traditional solvents, the Idaho National Engineering Laboratory (INEL) has developed the Hazardous Solvent Substitution Data System (HSSDS). The HSSDS provides a comprehensive system of information on alternatives to hazardous solvents and related subjects, and it makes that information available to solvent users, industrial hygienists, and process engineers. The HSSDS uses TOPIC reg-sign, a text retrieval system produced by Verity, Inc., to allow a user to search for information on a particular subject. TOPIC reg-sign produces a listing of the retrieved documents and allows the use to examine the documents individually and to use the information contained in them. This reference manual does not replace the comprehensive TOPIC reg-sign user documentation (available from Verity, Inc.), or the HSSDS Tutorial (available from the INEL). The purpose of this reference manual is to provide enough instruction on TOPIC reg-sign so the user may begin accessing the data contained in the HSSDS

  9. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  10. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  11. INIS: Database manual

    International Nuclear Information System (INIS)

    2003-01-01

    This document is one in a series of publications known as the INIS Reference Series. It is intended for users of INIS (International Nuclear Information System) output data on various media (FTP file, CD-ROM, e-mail file, earlier magnetic tape, cartridge, etc.). This manual provides a description of each data element including information on contents, structure and usage as well as historical overview of additions, deletions and changes of data elements and their contents that have taken place over the years. Each record contains certain control data fields (001-009), one, two or three bibliographic levels, a set of descriptors, and zero, one or more abstracts, one in English and optionally one or more in another language. In order to facilitate the description of the system, the sequence of data elements is based on the input or, as it is internally called, worksheet format which differs from the exchange format described in the manual IAEA-INIS-7. A separate section is devoted to each data element and deviations from the exchange format are indicated whenever present. As the Record Leader and the Directory are sufficiently explained in Chapter 3.1 of IAEA-INIS-7, the contents of this manual are limited to control fields and data fields; the detailed explanations are intended to supplement the basic information given in Chapter 3.2 of IAEA-INIS-7. Bibliographic levels are used to identify component parts of a publication, i.e. chapters in a book, articles in a journal issue, conference papers in a proceedings volume. All bibliographic levels contained in a record are given in a control data field. Each bibliographic level identifier appears in the subdirectory with a pointer to its position in the record

  12. MAP user's manual copyright

    International Nuclear Information System (INIS)

    Pillsbury, R.D. Jr.

    1991-12-01

    The program MITMAP represents a set of general purpose, two- dimensional, finite element programs for the calculation of magnetic fields. It consists of the program MAP and MAP2DJ. The two programs are used to solve different electromagnetic problems, but they have a common set of subrountines for pre- and postprocessing. Originally separate programs, they have been combined to make modification easier. The manuals, however, will remain separate. The program MAP is described in this manual. MAP is applicable to the class of problems with two-dimensional-planar or axisymmetric - geometries, in which the current density and the magnetic vector potential have only a single nonvanishing component. The single component is associated with the direction that is perpendicular to the plane of the problem and is invariant with respect to that direction. Maxwell's equations can be reduced to a solver diffusion equation in terms of the single, nonvanishing component of the magnetic vector potential for planar problems and to a single component of a vector potential for planar problems and to a single component of a vector diffusion equation for axisymmetric problems. The magnetic permeability appears in the governing equation. The permeability may be a function of the magnetic flux density. In addition, any electrically conducting material present will have eddy currents induced by a time varying magnetic field. These eddy currents must be included in the solution process. This manual provides a description of the structure of the input data and output for the program. There are several example problems presented that illustrate the major program features. Appendices are included that contain a derivation of the governing equations and the application of the finite element method to the solution of the equations

  13. Modern TTL circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Modern TTL Circuits Manual provides an introduction to the basic principles of Transistor-Transistor Logic (TTL). This book outlines the major features of the 74 series of integrated circuits (ICs) and introduces the various sub-groups of the TTL family.Organized into seven chapters, this book begins with an overview of the basics of digital ICs. This text then examines the symbology and mathematics of digital logic. Other chapters consider a variety of topics, including waveform generator circuitry, clocked flip-flop and counter circuits, special counter/dividers, registers, data latches, com

  14. Manual of Decolonization

    DEFF Research Database (Denmark)

    Gigone, Fabio

    2010-01-01

    During a residency in Bethlehem, Venice-based design and research studio Salottobuono formulated a 'strategy of subversion' for Israeli settlements in the West Bank. From this comes the elegant Manual of Decolonization; a generic but detailed resource for all post-occupation scenarios. Assessing...... how evacuated and imposed structures can be transformed in collaboration with local stakeholders, the book's plans, models and projections are divided into themes like 'De-parcelling', 'Re-combining' and 'Un-roofing'; landscape, nature and materials are considered at length. The outcome is an open...

  15. CMOS circuits manual

    CERN Document Server

    Marston, R M

    1995-01-01

    CMOS Circuits Manual is a user's guide for CMOS. The book emphasizes the practical aspects of CMOS and provides circuits, tables, and graphs to further relate the fundamentals with the applications. The text first discusses the basic principles and characteristics of the CMOS devices. The succeeding chapters detail the types of CMOS IC, including simple inverter, gate and logic ICs and circuits, and complex counters and decoders. The last chapter presents a miscellaneous collection of two dozen useful CMOS circuits. The book will be useful to researchers and professionals who employ CMOS circu

  16. Coal marketing manual 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This manual provides information on the international coal market in tabulated format. Statistics are presented for the Australian coal industry, exports, currency movements, world coal production, coal and coke imports and exports. Detailed information is provided on the Australian coal industry including mine specific summaries. Pricing summaries for thermal and coking coal in 1987, coal quality standards and specifications, trends in coal prices and stocks. Imports and exports for World coal and coke, details of shipping, international ports and iron and steel production. An exporters index of Australian and overseas companies with industry and government contacts is included. 15 figs., 67 tabs.

  17. Optoelectronics circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Optoelectronics Circuits Manual covers the basic principles and characteristics of the best known types of optoelectronic devices, as well as the practical applications of many of these optoelectronic devices. The book describes LED display circuits and LED dot- and bar-graph circuits and discusses the applications of seven-segment displays, light-sensitive devices, optocouplers, and a variety of brightness control techniques. The text also tackles infrared light-beam alarms and multichannel remote control systems. The book provides practical user information and circuitry and illustrations.

  18. Timergenerator circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Timer/Generator Circuits Manual is an 11-chapter text that deals mainly with waveform generator techniques and circuits. Each chapter starts with an explanation of the basic principles of its subject followed by a wide range of practical circuit designs. This work presents a total of over 300 practical circuits, diagrams, and tables.Chapter 1 outlines the basic principles and the different types of generator. Chapters 2 to 9 deal with a specific type of waveform generator, including sine, square, triangular, sawtooth, and special waveform generators pulse. These chapters also include pulse gen

  19. Health physics instrument manual

    International Nuclear Information System (INIS)

    Gupton, E.D.

    1978-08-01

    The purpose of this manual is to provide apprentice health physics surveyors and other operating groups not directly concerned with radiation detection instruments a working knowledge of the radiation detection and measuring instruments in use at the Laboratory. The characteristics and applications of the instruments are given. Portable instruments, stationary instruments, personnel monitoring instruments, sample counters, and miscellaneous instruments are described. Also, information sheets on calibration sources, procedures, and devices are included. Gamma sources, beta sources, alpha sources, neutron sources, special sources, a gamma calibration device for badge dosimeters, and a calibration device for ionization chambers are described

  20. IMAGE User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Stehfest, E; De Waal, L; Oostenrijk, R.

    2010-09-15

    This user manual contains the basic information for running the simulation model IMAGE ('Integrated Model to Assess the Global Environment') of PBL. The motivation for this report was a substantial restructuring of the source code for IMAGE version 2.5. The document gives concise content information about the submodels, tells the user how to install the program, describes the directory structure of the run environment, shows how scenarios have to be prepared and run, and gives insight in the restart functionality.

  1. Radioanalytical methods manual

    International Nuclear Information System (INIS)

    Chiu, N.W.; Dean, J.R.

    1986-01-01

    This Radioanalytical Methods manual is comprised of 12 chapters. It includes a review of the pertinent literature up to the end of 1982 pertaining to the measurement of the radioactive species listed under the terms of the contract. Included is methodology recommended for the decompositions of soils, tailings, ores, biological samples and air filters. Detailed analytical methodology for the measurement of gross alpha, gross beta, gross gamma, uranium, radium-226, radium-228, lead-210, thorium-232, thorium-230, thorium-228, total thorium, radon-222, radon-220 and radon-219 is presented

  2. ASSERT-4 user's manual

    International Nuclear Information System (INIS)

    Judd, R.A.; Tahir, A.; Carver, M.B.; Stewart, D.G.; Thibeault, P.R.; Rowe, D.S.

    1984-09-01

    ASSERT-4 is an advanced subchannel code being developed primarily to model single- and two-phase flow and heat transfer in horizontal rod bundles. This manual is intended to facilitate the application of this code to the analysis of flow in reactor fuel channels. It contains a brief description of the thermalhydraulic model and ASSERT-4 solution scheme, and other information required by users. This other information includes a detailed discussion of input data requirements, a sample problem and solution, and information describing how to access and run ASSERT-4 on the Chalk River computers

  3. Rural Gas Program manual

    Energy Technology Data Exchange (ETDEWEB)

    1987-11-01

    The intent and purpose of this manual is to describe the various guideliness and administrative procedures associated with the Alberta Rural Gas Program and to consolidate and expand upon the legislation under which the Program has been developed. It is intended primarily for the use and information of rural gas distributors, their agents, and other private or government parties having an interest in the Rural Gas Program. Information is presented on: rural gas franchises, technical applications, contracts and tenders, determination of system capital costs for grant support, grants, Gas Alberta brokerage arrangements, insurance coverage, utility rights-of-way, and lien notes.

  4. Health and safety manual

    International Nuclear Information System (INIS)

    1980-02-01

    The manual consists of the following chapters: general policies and administration; the Environmental Health and Safety Department; the Medical Services Department: biological hazards; chemical safety; confined space entry; cryogenic safety; electrical safety; emergency plans; engineering and construction; evacuations, trenching, and shoring; fire safety; gases, flammable and compressed; guarding, mechanical; ladders and scaffolds, work surfaces; laser safety; materials handling and storage; noise; personal protective equipment; pressure safety; radiation safety, ionizing and non-ionizing; sanitation; seismic safety; training, environmental health and safety; tools, power and hand-operated; traffic and transportation; and warning signs and devices

  5. Astronaut training manual

    Science.gov (United States)

    Coleman, E. A.

    1980-01-01

    Scientific information from previous space flights, space medicine, exercise physiology, and sports medicine was used to prepare a physical fitness manual suitable for use by members of the NASA astronaut population. A variety of scientifically valid exercise programs and activities suitable for the development of physical fitness are provided. Programs, activities, and supportive scientific data are presented in a concise, easy to read format so as to permit the user to select his or her mode of training with confidence and devote time previously spent experimenting with training routines to preparation for space flight. The programs and activities included were tested and shown to be effective and enjoyable.

  6. RADTRAN 6 Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  7. RADTRAN 6 technical manual.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  8. FISPACT 97: user manual

    International Nuclear Information System (INIS)

    Forrest, R.A.; Sublet, J.-Ch.

    1997-05-01

    FISPACT is the inventory code included in the European Activation System (EASY). A new version of FISPACT: FISPACT-97 has been developed and this report is the User manual for the code. It explains the use of all the code words used in the input file to specify a FISPACT run and describes how all the data files are connected. A series of appendices cover the working of the code and the physical and mathematical details. Background information on the data files and extensive examples of input files suitable for various applications are included. (Author)

  9. Timber designers' manual

    CERN Document Server

    Ozelton, E C

    2008-01-01

    This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

  10. NASCAP programmer's reference manual

    Science.gov (United States)

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-05-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  11. Percept User Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Carnes, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennon, Stephen Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    This document is the main user guide for the Sierra/Percept capabilities including the mesh_adapt and mesh_transfer tools. Basic capabilities for uniform mesh refinement (UMR) and mesh transfers are discussed. Examples are used to provide illustration. Future versions of this manual will include more advanced features such as geometry and mesh smoothing. Additionally, all the options for the mesh_adapt code will be described in detail. Capabilities for local adaptivity in the context of offline adaptivity will also be included. This page intentionally left blank.

  12. What motivates professionals to engage in the accreditation of healthcare organizations?

    Science.gov (United States)

    Greenfield, David; Pawsey, Marjorie; Braithwaite, Jeffrey

    2011-02-01

    Motivated staff are needed to improve quality and safety in healthcare organizations. Stimulating and engaging staff to participate in accreditation processes is a considerable challenge. The purpose of this study was to explore the experiences of health executives, managers and frontline clinicians who participated in organizational accreditation processes: what motivated them to engage, and what benefits accrued? The setting was a large public teaching hospital undergoing a planned review of its accreditation status. A research protocol was employed to conduct semi-structured interviews with a purposive sample of 30 staff with varied organizational roles, from different professions, to discuss their involvement in accreditation. Thematic analysis of the data was undertaken. The analysis identified three categories, each with sub-themes: accreditation response (reactions to accreditation and the value of surveys); survey issues (participation in the survey, learning through interactions and constraints) and documentation issues (self-assessment report, survey report and recommendations). Participants' occupational role focuses their attention to prioritize aspects of the accreditation process. Their motivations to participate and the benefits that accrue to them can be positively self-reinforcing. Participants have a desire to engage collaboratively with colleagues to learn and validate their efforts to improve. Participation in the accreditation process promoted a quality and safety culture that crossed organizational boundaries. The insights into worker motivation can be applied to engage staff to promote learning, overcome organizational boundaries and improve services. The findings can be applied to enhance involvement with accreditation and, more broadly, to other quality and safety activities.

  13. Health service accreditation as a predictor of clinical and organisational performance: a blinded, random, stratified study.

    Science.gov (United States)

    Braithwaite, Jeffrey; Greenfield, David; Westbrook, Johanna; Pawsey, Marjorie; Westbrook, Mary; Gibberd, Robert; Naylor, Justine; Nathan, Sally; Robinson, Maureen; Runciman, Bill; Jackson, Margaret; Travaglia, Joanne; Johnston, Brian; Yen, Desmond; McDonald, Heather; Low, Lena; Redman, Sally; Johnson, Betty; Corbett, Angus; Hennessy, Darlene; Clark, John; Lancaster, Judie

    2010-02-01

    Despite the widespread use of accreditation in many countries, and prevailing beliefs that accreditation is associated with variables contributing to clinical care and organisational outcomes, little systematic research has been conducted to examine its validity as a predictor of healthcare performance. To determine whether accreditation performance is associated with self-reported clinical performance and independent ratings of four aspects of organisational performance. Independent blinded assessment of these variables in a random, stratified sample of health service organisations. Acute care: large, medium and small health-service organisations in Australia. Study participants Nineteen health service organisations employing 16 448 staff treating 321 289 inpatients and 1 971 087 non-inpatient services annually, representing approximately 5% of the Australian acute care health system. Correlations of accreditation performance with organisational culture, organisational climate, consumer involvement, leadership and clinical performance. Results Accreditation performance was significantly positively correlated with organisational culture (rho=0.618, p=0.005) and leadership (rho=0.616, p=0.005). There was a trend between accreditation and clinical performance (rho=0.450, p=0.080). Accreditation was unrelated to organisational climate (rho=0.378, p=0.110) and consumer involvement (rho=0.215, p=0.377). Accreditation results predict leadership behaviours and cultural characteristics of healthcare organisations but not organisational climate or consumer participation, and a positive trend between accreditation and clinical performance is noted.

  14. Impact of laboratory accreditation on patient care and the health system.

    Science.gov (United States)

    Peter, Trevor F; Rotz, Philip D; Blair, Duncan H; Khine, Aye-Aye; Freeman, Richard R; Murtagh, Maurine M

    2010-10-01

    Accreditation is emerging as a preferred framework for building quality medical laboratory systems in resource-limited settings. Despite the low numbers of laboratories accredited to date, accreditation has the potential to improve the quality of health care for patients through the reduction of testing errors and attendant decreases in inappropriate treatment. Accredited laboratories can become more accountable and less dependent on external support. Efforts made to achieve accreditation may also lead to improvements in the management of laboratory networks by focusing attention on areas of greatest need and accelerating improvement in areas such as supply chain, training, and instrument maintenance. Laboratory accreditation may also have a positive influence on performance in other areas of health care systems by allowing laboratories to demonstrate high standards of service delivery. Accreditation may, thus, provide an effective mechanism for health system improvement yielding long-term benefits in the quality, cost-effectiveness, and sustainability of public health programs. Further studies are needed to strengthen the evidence on the benefits of accreditation and to justify the resources needed to implement accreditation programs aimed at improving the performance of laboratory systems.

  15. Factors affecting implementation of accreditation programmes and the impact of the accreditation process on quality improvement in hospitals: a SWOT analysis.

    Science.gov (United States)

    Ng, G K B; Leung, G K K; Johnston, J M; Cowling, B J

    2013-10-01

    The objectives of this review were to identify factors that influence implementation of hospital accreditation programmes and to assess the impact of the accreditation process on quality improvement in public hospitals. Two electronic databases, Medline (OvidSP) and PubMed, were systematically searched. "Public hospital", "hospital accreditation", and "quality improvement" were used as the search terms. A total of 348 citations were initially identified. After critical appraisal and study selection, 26 articles were included in the review. The data were extracted and analysed using a SWOT (strengths, weaknesses, opportunities, threats) analysis. Increased staff engagement and communication, multidisciplinary team building, positive changes in organisational culture, and enhanced leadership and staff awareness of continuous quality improvement were identified as strengths. Weaknesses included organisational resistance to change, increased staff workload, lack of awareness about continuous quality improvement, insufficient staff training and support for continuous quality improvement, lack of applicable accreditation standards for local use, and lack of performance outcome measures. Opportunities included identification of improvement areas, enhanced patient safety, additional funding, public recognition, and market advantage. Threats included opportunistic behaviours, funding cuts, lack of incentives for participation, and a regulatory approach to mandatory participation. By relating the findings to the operational issues of accreditation, this review discussed the implications for successful implementation and how accreditation may drive quality improvement. These findings have implications for various stakeholders (government, the public, patients and health care providers), when it comes to embarking on accreditation exercises.

  16. A Content Analysis of General Chemistry Laboratory Manuals for Evidence of Higher-Order Cognitive Tasks

    Science.gov (United States)

    Domin, Daniel S.

    1999-01-01

    The science laboratory instructional environment is ideal for fostering the development of problem-solving, manipulative, and higher-order thinking skills: the skills needed by today's learner to compete in an ever increasing technology-based society. This paper reports the results of a content analysis of ten general chemistry laboratory manuals. Three experiments from each manual were examined for evidence of higher-order cognitive activities. Analysis was based upon the six major cognitive categories of Bloom's Taxonomy of Educational Objectives: knowledge, comprehension, application, analysis, synthesis, and evaluation. The results of this study show that the overwhelming majority of general chemistry laboratory manuals provide tasks that require the use of only the lower-order cognitive skills: knowledge, comprehension, and application. Two of the laboratory manuals were disparate in having activities that utilized higher-order cognition. I describe the instructional strategies used within these manuals to foster higher-order cognitive development.

  17. Regulation and accreditation: the pros and cons for psychiatric facilities.

    Science.gov (United States)

    Houck, J H

    1984-12-01

    Psychiatric hospitals must be regulated, and someone must write the rules, says the author. But the rules of such agencies as the Joint Commission on Accreditation of Hospitals and Medicare are rarely subjected to rigorous testing, either for efficacy or for cost-effectiveness. The author discusses the problems of expense, inconsistency, and excessive documentation created by the regulatory process, plus positive aspects such as the stimulus for improvement. One urgent need, he believes, is to reconcile more closely the views of the cost-cutters and the standard-setters before they inflict irreparable damage on some segments of the hospital system.

  18. Quality improvements in decreasing medication administration errors made by nursing staff in an academic medical center hospital: a trend analysis during the journey to Joint Commission International accreditation and in the post-accreditation era.

    Science.gov (United States)

    Wang, Hua-Fen; Jin, Jing-Fen; Feng, Xiu-Qin; Huang, Xin; Zhu, Ling-Ling; Zhao, Xiao-Ying; Zhou, Quan

    2015-01-01

    Medication errors may occur during prescribing, transcribing, prescription auditing, preparing, dispensing, administration, and monitoring. Medication administration errors (MAEs) are those that actually reach patients and remain a threat to patient safety. The Joint Commission International (JCI) advocates medication error prevention, but experience in reducing MAEs during the period of before and after JCI accreditation has not been reported. An intervention study, aimed at reducing MAEs in hospitalized patients, was performed in the Second Affiliated Hospital of Zhejiang University, Hangzhou, People's Republic of China, during the journey to JCI accreditation and in the post-JCI accreditation era (first half-year of 2011 to first half-year of 2014). Comprehensive interventions included organizational, information technology, educational, and process optimization-based measures. Data mining was performed on MAEs derived from a compulsory electronic reporting system. The number of MAEs continuously decreased from 143 (first half-year of 2012) to 64 (first half-year of 2014), with a decrease in occurrence rate by 60.9% (0.338% versus 0.132%, P<0.05). The number of MAEs related to high-alert medications decreased from 32 (the second half-year of 2011) to 16 (the first half-year of 2014), with a decrease in occurrence rate by 57.9% (0.0787% versus 0.0331%, P<0.05). Omission was the top type of MAE during the first half-year of 2011 to the first half-year of 2014, with a decrease by 50% (40 cases versus 20 cases). Intravenous administration error was the top type of error regarding administration route, but it continuously decreased from 64 (first half-year of 2012) to 27 (first half-year of 2014). More experienced registered nurses made fewer medication errors. The number of MAEs in surgical wards was twice that in medicinal wards. Compared with non-intensive care units, the intensive care units exhibited higher occurrence rates of MAEs (1.81% versus 0.24%, P<0

  19. Radiological control manual. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  20. Radiological control manual. Revision 1

    International Nuclear Information System (INIS)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP

  1. BBC users manual

    International Nuclear Information System (INIS)

    Ltterst, R.F.; Sutcliffe, W.G.; Warshaw, S.I.

    1977-11-01

    BBC is a two-dimensional, multifluid Eulerian hydro-radiation code based on KRAKEN and some subsequent ideas. It was developed in the explosion group in T-Division as a basic two-dimensional code to which various types of physics can be added. For this reason BBC is a FORTRAN (LRLTRAN) code. In order to gain the 2-to-1 to 4-to-1 speed advantage of the STACKLIB software on the 7600's and to be able to execute at high speed on the STAR, the vector extensions of LRLTRAN (STARTRAN) are used throughout the code. Either cylindrical- or slab-type problems can be run on BBC. The grid is bounded by a rectangular band of boundary zones. The interfaces between the regular and boundary zones can be selected to be either rigid or nonrigid. The setup for BBC problems is described in the KEG Manual and LEG Manual. The difference equations are described in BBC Hydrodynamics. Basic input and output for BBC are described

  2. SYVAC3 manual

    International Nuclear Information System (INIS)

    Andres, T.H.

    2000-01-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  3. Energy statistics manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Manual is written in a question-and-answer format. The points developed are introduced with a basic question, such as: What do people mean by 'fuels' and 'energy'? What units are used to express oil? How are energy data presented? Answers are given in simple terms and illustrated by graphs, charts and tables. More technical explanations are found in the annexes. The Manual contains seven chapters. The first one presents the fundamentals of energy statistics, five chapters deal with the five different fuels (electricity and heat; natural gas; oil; solid fuels and manufactured gases; renewables and waste) and the last chapter explains the energy balance. Three technical annexes and a glossary are also included. For the five chapters dedicated to the fuels, there are three levels of reading: the first one contains general information on the subject, the second one reviews issues which are specific to the joint IEA/OECD-Eurostat-UNECE questionnaires and the third one focuses on the essential elements of the subject. 43 figs., 22 tabs., 3 annexes.

  4. MELCOR computer code manuals

    Energy Technology Data Exchange (ETDEWEB)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  5. CTF Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Avramova, Maria N. [Pennsylvania State Univ., University Park, PA (United States); Salko, Robert K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-05-25

    Coolant-Boiling in Rod Arrays|Two Fluids (COBRA-TF) is a thermal/ hydraulic (T/H) simulation code designed for light water reactor (LWR) vessel analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of 9 conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and had been used and modified by several institutions over the last few decades. COBRA-TF also found use at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG) and has been improved, updated, and subsequently re-branded as CTF. As part of the improvement process, it was necessary to generate sufficient documentation for the open-source code which had lacked such material upon being adopted by RDFMG. This document serves mainly as a theory manual for CTF, detailing the many two-phase heat transfer, drag, and important accident scenario models contained in the code as well as the numerical solution process utilized. Coding of the models is also discussed, all with consideration for updates that have been made when transitioning from COBRA-TF to CTF. Further documentation outside of this manual is also available at RDFMG which focus on code input deck generation and source code global variable and module listings.

  6. LCS Users Manual

    International Nuclear Information System (INIS)

    Redd, A.J.; Ignat, D.W.

    1998-01-01

    The Lower Hybrid Simulation Code (LSC) is a computational model of lower hybrid current drive in the presence of an electric field. Details of geometry, plasma profiles, and circuit equations are treated. Two-dimensional velocity space effects are approximated in a one-dimensional Fokker-Planck treatment. The LSC was originally written to be a module for lower hybrid current drive called by the Tokamak Simulation Code (TSC), which is a numerical model of an axisymmetric tokamak plasma and the associated control systems. The TSC simulates the time evolution of a free boundary plasma by solving the MHD equations on a rectangular computational grid. The MHD equations are coupled to the external circuits (representing poloidal field coils) through the boundary conditions. The code includes provisions for modeling the control system, external heating, and fusion heating. The LSC module can also be called by the TRANSP code. TRANSP represents the plasma with an axisymmetric, fixed-boundary model and focuses on calculation of plasma transport to determine transport coefficients from data on power inputs and parameters reached. This manual covers the basic material needed to use the LSC. If run in conjunction with TSC, the ''TSC Users Manual'' should be consulted. If run in conjunction with TRANSP, on-line documentation will be helpful. A theoretical background of the governing equations and numerical methods is given. Information on obtaining, compiling, and running the code is also provided

  7. MELCOR computer code manuals

    International Nuclear Information System (INIS)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package

  8. ARDS User Manual

    Science.gov (United States)

    Fleming, David P.

    2001-01-01

    Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

  9. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  10. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  11. SYVAC3 manual

    Energy Technology Data Exchange (ETDEWEB)

    Andres, T.H

    2000-07-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  12. Logic and discrete mathematics a concise introduction : solutions manual

    CERN Document Server

    Conradie, Willem; Robinson, Claudette

    2015-01-01

    Solutions manual to accompany Logic and Discrete Mathematics: A Concise Introduction This book features a unique combination of comprehensive coverage of logic with a solid exposition of the most important fields of discrete mathematics, presenting material that has been tested and refined by the authors in university courses taught over more than a decade. Written in a clear and reader-friendly style, each section ends with an extensive set of exercises, most of them provided with complete solutions which are available in this accompanying solutions manual.

  13. Requirements to be met by the operation manual

    International Nuclear Information System (INIS)

    1981-03-01

    The rule applies to the contents and the lay-out of the operating manual for stationary nuclear power plants. The draft contains: 1. General requirement to be met by the contents of the operating manual. The operating manual to be arranged in 4 parts (part 1: internal rules and regulations; part 2: operation overall plant; part 3: incidents; part 4: operation systems). Safety specifications to be included in the manual, the exemption being the system of technical documentation. 2. General requirements to be met by the lay-out of the operating manual. Comprehensibility; legibility; structure and subdivisions; arrangement of the instructions and design of the manuals cover. 3. Requirements to be met by part 1. Defining the various internal rules and regulations (personnel management); rules and regulations concerning inspections and shift work; maintenance and repair; radiation protection; guard duty and admission; alarm; fire protection; first aid. 4. Requirements to be met by part 2. Provisions and operational limitations; limit values important from the point of view of safety; normal operation; anomalous operation; in-service inspections. 6. Requirements to be met by part 3. 7. Annex: Rules, regulations and stipulations mentioned in the rule draft. (orig.)

  14. Comprehensive Psychiatric Evaluation

    Science.gov (United States)

    ... Facts for Families Guide Facts for Families - Vietnamese Comprehensive Psychiatric Evaluation No. 52; Updated October 2017 Evaluation ... with serious emotional and behavioral problems need a comprehensive psychiatric evaluation. Comprehensive psychiatric evaluations usually require a ...

  15. Children's hypertext comprehension

    NARCIS (Netherlands)

    Segers, P.C.J.; Segers, E.; Broek, P. van den

    2017-01-01

    The present chapter gives an overview of the literature on hypertext comprehension, children's hypertext comprehension and individual variation therein, ending with a perspective for future research. Hypertext comprehension requires the reader to make bridging inferences between the different parts

  16. How changing quality management influenced PGME accreditation: a focus on decentralization and quality improvement.

    Science.gov (United States)

    Akdemir, Nesibe; Lombarts, Kiki M J M H; Paternotte, Emma; Schreuder, Bas; Scheele, Fedde

    2017-06-02

    Evaluating the quality of postgraduate medical education (PGME) programs through accreditation is common practice worldwide. Accreditation is shaped by educational quality and quality management. An appropriate accreditation design is important, as it may drive improvements in training. Moreover, accreditors determine whether a PGME program passes the assessment, which may have major consequences, such as starting, continuing or discontinuing PGME. However, there is limited evidence for the benefits of different choices in accreditation design. Therefore, this study aims to explain how changing views on educational quality and quality management have impacted the design of the PGME accreditation system in the Netherlands. To determine the historical development of the Dutch PGME accreditation system, we conducted a document analysis of accreditation documents spanning the past 50 years and a vision document outlining the future system. A template analysis technique was used to identify the main elements of the system. Four themes in the Dutch PGME accreditation system were identified: (1) objectives of accreditation, (2) PGME quality domains, (3) quality management approaches and (4) actors' responsibilities. Major shifts have taken place regarding decentralization, residency performance and physician practice outcomes, and quality improvement. Decentralization of the responsibilities of the accreditor was absent in 1966, but this has been slowly changing since 1999. In the future system, there will be nearly a maximum degree of decentralization. A focus on outcomes and quality improvement has been introduced in the current system. The number of formal documents striving for quality assurance has increased enormously over the past 50 years, which has led to increased bureaucracy. The future system needs to decrease the number of standards to focus on measurable outcomes and to strive for quality improvement. The challenge for accreditors is to find the right

  17. Ciencias 2. Manual do Professor (Science Teacher's Manual).

    Science.gov (United States)

    Raposo, Lucilia

    This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

  18. Camp Health Aide Manual = Manual para trabajadores de salud.

    Science.gov (United States)

    Robinson, June Grube; And Others

    This bilingual manual serves as a textbook for migrant Camp Health Aides. Camp Health Aides are members of migrant labor camps enlisted to provide information about health and social services to migrant workers and their families. The manual is divided into 12 tabbed sections representing lessons. Teaching notes printed on contrasting paper…

  19. Accreditation of undergraduate medical training programs: practices in nine developing countries as compared with the United States.

    Science.gov (United States)

    Cueto, Jose; Burch, Vanessa C; Adnan, Nor Azila Mohd; Afolabi, Bosede B; Ismail, Zalina; Jafri, Wasim; Olapade-Olaopa, E Oluwabunmi; Otieno-Nyunya, Boaz; Supe, Avinash; Togoo, Altantsetseg; Vargas, Ana Lia; Wasserman, Elizabeth; Morahan, Page S; Burdick, William; Gary, Nancy

    2006-07-01

    Undergraduate medical training program accreditation is practiced in many countries, but information from developing countries is sparse. We compared medical training program accreditation systems in nine developing countries, and compared these with accreditation practices in the United States of America (USA). Medical program accreditation practices in nine developing countries were systematically analyzed using all available published documents. Findings were compared to USA accreditation practices. Accreditation systems with explicitly defined criteria, standards and procedures exist in all nine countries studied: Argentina, India, Kenya, Malaysia, Mongolia, Nigeria, Pakistan, Philippines and South Africa. Introduction of accreditation processes is relatively recent, starting in 1957 in India to 2001 in Malaysia. Accrediting agencies were set up in these countries predominantly by their respective governments as a result of legislation and acts of Parliament, involving Ministries of Education and Health. As in the USA, accreditation: (1) serves as a quality assurance mechanism promoting professional and public confidence in the quality of medical education, (2) assists medical schools in attaining desired standards, and (3) ensures that graduates' performance complies with national norms. All nine countries follow similar accreditation procedures. Where mandatory accreditation is practiced, non-compliant institutions may be placed on probation, student enrollment suspended or accreditation withdrawn. Accreditation systems in several developing countries are similar to those in the developed world. Data suggest the trend towards instituting quality assurance mechanisms in medical education is spreading to some developing countries, although generalization to other areas of the world is difficult to ascertain.

  20. Profiling health-care accreditation organizations: an international survey.

    Science.gov (United States)

    Shaw, Charles D; Braithwaite, Jeffrey; Moldovan, Max; Nicklin, Wendy; Grgic, Ileana; Fortune, Triona; Whittaker, Stuart

    2013-07-01

    To describe global patterns among health-care accreditation organizations (AOs) and to identify determinants of sustainability and opportunities for improvement. Web-based questionnaire survey. Organizations offering accreditation services nationally or internationally to health-care provider institutions or networks at primary, secondary or tertiary level in 2010. s) External relationships, scope and activity public information. Forty-four AOs submitted data, compared with 33 in a survey 10 years earlier. Of the 30 AOs that reported survey activity in 2000 and 2010, 16 are still active and stable or growing. New and old programmes are increasingly linked to public funding and regulation. While the number of health-care AOs continues to grow, many fail to thrive. Successful organizations tend to complement mechanisms of regulation, health-care funding or governmental commitment to quality and health-care improvement that offer a supportive environment. Principal challenges include unstable business (e.g. limited market, low uptake) and unstable politics. Many organizations make only limited information available to patients and the public about standards, procedures or results.

  1. Accredited Standards Committee N15 Developments And Future Directions

    International Nuclear Information System (INIS)

    Mathews, Caroline E.; May, Melanie; Preston, Lynne

    2009-01-01

    Accredited Standards Committee (ASC) N15, Methods of Nuclear Material Control, is sponsored by the Institute of Nuclear Materials Management (INMM) to develop standards for protection, control and accounting of special nuclear materials in all phases of the nuclear fuel cycle, including analytical procedures where necessary and special to this purpose, except that physical protection of special nuclear material within a nuclear power plant is not included. Voluntary consensus standards complement federal regulations and technical standards and fulfill an important role for the nuclear regulatory agencies. This paper describes the N15 standards development process, with INMM as the Standards Developing Organization (SDO) and the N15 Committee responsible for implementation. Key components of the N15 standards development process include ANSI accreditation; compliance with the ANSI Essential Requirements (ER), coordination with other SDOs, communication with stakeholders, maintenance of balance between interest categories, and ANSI periodic audits. Recent and future ASC N15 activities are discussed, with a particular focus on new directions in anticipation of renewed growth in nuclear power.

  2. GANDALF: users' manual

    International Nuclear Information System (INIS)

    Strout, R.E. II; Beach, J.L.

    1977-01-01

    The GANDALF computer code was written to calculate neutron dose equivalent given the pulse-height data obtained by using a Linear Energy Transfer (LET) proportional counter. The code also uses pre- and/or post-calibration spectra, from an alpha source, to determine a calibration factor in keV/μ/channel. Output from the code consists of the effective radius of the detection chamber in microns, a calibration factor in keV/μ/channel, and the total dose and dose equivalent in rad or rem between any two LET energies by using the equations by Attix and Roesch [Radiation Dosimetry, 1, 71 (1968)]. This report is a user's manual and is not intended as anything else, and assumes that the user has a basic knowledge of the LLL Octopus timesharing system. However, a very brief description of how the code operates is included

  3. Coal marketing manual 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    This manual presents information for the use of marketers, consumers, analysts and investors. The information is presented in a series of tables and figures. Statistics are given for: Australian export tonnages and average export values for 1978-1985; international pig iron production 1976 to 1985; and international crude steel production 1979 to 1985. Trends in Australian export tonnages and prices of coal are reviewed. Details of international loading and discharge ports are given, together with a historical summary of shipping freight-rates since 1982. Long term contract prices for thermal and coking coal to Japan are tabulated. A review of coal and standards is given, together with Australian standards for coal and coke. A section on coal quality is included containing information on consumer coal quality preferences and Australian and Overseas coal brands and qualities. Finally an index is given of contact details of Australian and Overseas exporting companies, government departments, and the Australian Coal Association.

  4. FRMAC Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  5. New Oxford style manual

    CERN Document Server

    2012-01-01

    The New Oxford Style Manual brings together two essential reference works in a single volume: New Hart's Rules and the New Oxford Dictionary for Writers and Editors. New Hart's Rules, Oxford's definitive guide to style, consists of 20 chapters that provide authoritative and expert advice on how to prepare copy for publication. Topics covered include how to use italic, roman, and other type treatments, numbers and dates, law and legal references, illustrations, notes and references, and bibliographies. The guidelines are complemented by the New Oxford Dictionary for Writers and Editors, which features 25,000 alphabetically arranged entries giving authoritative advice on those words and names which raise questions time and time again because of spelling, capitalization, hyphenation, or cultural and historical context. Entries give full coverage of recommended spellings, variant forms, confusable words, hyphenation, capitalization, foreign and specialist terms, proper names, and abbreviations. The dictionary a...

  6. CALENDF-2010: user manual

    International Nuclear Information System (INIS)

    Sublet, Jean-Christophe; Ribon, Pierre; Coste-Delclaux, Mireille

    2011-09-01

    CALENDF-2010 represents a Fortran-95 update of the 1994, 2001 then 2005 code distribution with emphasise on programming quality and standards, physics and usage improvements. Devised to process multigroup cross-sections it relies on Gauss quadrature mathematical principle and strength. The followings processes can be handled by the code: moment probability table and effective cross-section calculation; pointwise cross section, probability table and effective cross-section regrouping; probability table condensation; probability table mix for several isotopes; probability table interpolation; effective cross section based probability table calculations; probability table calculations from effective cross-sections; cross-section comparison, complete energy pointwise cross-section processing and thickness dependent averaged transmission sample calculation. The CALENDF user manual, after having listed all principal code functions, describes sequentially each of them and gives comments on their associated output streams. Installation procedures, test cases and running time platform comparisons are given in the appendix. (authors)

  7. Google The Missing Manual

    CERN Document Server

    Milstein, Sarah; Dornfest, Rael; MacDonald, Matthew

    2008-01-01

    Google.com is one of the most popular sites on the Internet and is used around the world by millions of people every day. Sure, you know how to "Google it" when you're searching for something--anything!--on the Web. It's plenty fast and easy to use. But did you know how much more you could achieve with the world's best search engine by clicking beyond the "Google Search" button? While you can interface with Google in 97 languages and glean results in 35, you can't find any kind of instruction manual from Google. Lucky for you, our fully updated and greatly expanded second edition to the best

  8. WISDAAM software programmer's manual

    International Nuclear Information System (INIS)

    Ball, J.R.

    1992-10-01

    The WISDAAM system was developed to provide quality control over test data associated with in situ testing at the Waste Isolation Pilot Plant (WIPP). Assurance of data quality is of critical importance as these tests supply the information which will be used for development and verification of the technology required for repository implementation. The amount of data collected from the tests, which are some of the largest ever fielded in an underground facility, prompted the undertaking of a major project task to address data processing. The goal was to create a conceptual umbrella under which all of the activities associated with processing WIPP data (i.e., data reduction, archiving, retrieval, etc.) could be grouped. The WISDAAM system was the product of this task. The overall system covers electronic as well as manual data processing; however, this document deals primarily with those operations implemented by software running on a VAX computer

  9. Pressure vessel design manual

    CERN Document Server

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  10. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  11. STAIRS User's Manual

    Energy Technology Data Exchange (ETDEWEB)

    Gadjokov, V; Dragulev, V; Gove, N; Schmid, H

    1976-10-15

    The STorage And Information Retrieval System (STAIRS) of IBM is described from the user's point of view. The description is based on the experimental use of STAIRS at the IAEA computer, with INIS and AGRIS data bases, from June 1975 to May 1976. Special attention is paid to what may be termed the hierarchical approach to retrieval in STAIRS. Such an approach allows for better use of the intrinsic data-base structure and, hence, contributes to higher recall and/or relevance ratios in retrieval. The functions carried out by STAIRS are explained and the communication language between the user and the system outlined. Details are given of the specific structure of the INIS and AGRIS data bases for STAIRS. The manual should enable an inexperienced user to start his first on-line dialogues by means of a CRT or teletype terminal. (author)

  12. Wikipedia the missing manual

    CERN Document Server

    Broughton, John

    2008-01-01

    Want to be part of the largest group-writing project in human history? Learn how to contribute to Wikipedia, the user-generated online reference for the 21st century. Considered more popular than eBay, Microsoft.com, and Amazon.com, Wikipedia servers respond to approximately 30,000 requests per second, or about 2.5 billion per day. It's become the first point of reference for people the world over who need a fact fast.If you want to jump on board and add to the content, Wikipedia: The Missing Manual is your first-class ticket. Wikipedia has more than 9 million entries in 250 languages, over 2

  13. STAIRS User's Manual

    International Nuclear Information System (INIS)

    Gadjokov, V.; Dragulev, V.; Gove, N.; Schmid, H.

    1976-10-01

    The STorage And Information Retrieval System (STAIRS) of IBM is described from the user's point of view. The description is based on the experimental use of STAIRS at the IAEA computer, with INIS and AGRIS data bases, from June 1975 to May 1976. Special attention is paid to what may be termed the hierarchical approach to retrieval in STAIRS. Such an approach allows for better use of the intrinsic data-base structure and, hence, contributes to higher recall and/or relevance ratios in retrieval. The functions carried out by STAIRS are explained and the communication language between the user and the system outlined. Details are given of the specific structure of the INIS and AGRIS data bases for STAIRS. The manual should enable an inexperienced user to start his first on-line dialogues by means of a CRT or teletype terminal. (author)

  14. GRSAC Users Manual

    International Nuclear Information System (INIS)

    Ball, S.J.; Nypaver, D.J.

    1999-01-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model

  15. GRSAC Users Manual

    Energy Technology Data Exchange (ETDEWEB)

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  16. Development and Implementation of a Quality Improvement Process for Echocardiographic Laboratory Accreditation.

    Science.gov (United States)

    Gilliland, Yvonne E; Lavie, Carl J; Ahmad, Homaa; Bernal, Jose A; Cash, Michael E; Dinshaw, Homeyar; Milani, Richard V; Shah, Sangeeta; Bienvenu, Lisa; White, Christopher J

    2016-03-01

    We describe our process for quality improvement (QI) for a 3-year accreditation cycle in echocardiography by the Intersocietal Accreditation Commission (IAC) for a large group practice. Echocardiographic laboratory accreditation by the IAC was introduced in 1996, which is not required but could impact reimbursement. To ensure high-quality patient care and community recognition as a facility committed to providing high-quality echocardiographic services, we applied for IAC accreditation in 2010. Currently, there is little published data regarding the IAC process to meet echocardiography standards. We describe our approach for developing a multicampus QI process for echocardiographic laboratory accreditation during the 3-year cycle of accreditation by the IAC. We developed a quarterly review assessing (1) the variability of the interpretations, (2) the quality of the examinations, (3) a correlation of echocardiographic studies with other imaging modalities, (4) the timely completion of reports, (5) procedure volume, (6) maintenance of Continuing Medical Education credits by faculty, and (7) meeting Appropriate Use Criteria. We developed and implemented a multicampus process for QI during the 3-year accreditation cycle by the IAC for Echocardiography. We documented both the process and the achievement of those metrics by the Echocardiography Laboratories at the Ochsner Medical Institutions. We found the QI process using IAC standards to be a continuous educational experience for our Echocardiography Laboratory physicians and staff. We offer our process as an example and guide for other echocardiography laboratories who wish to apply for such accreditation or reaccreditation. © 2016, Wiley Periodicals, Inc.

  17. The "Glocalization" of Medical School Accreditation: Case Studies From Taiwan, South Korea, and Japan.

    Science.gov (United States)

    Ho, Ming-Jung; Abbas, Joan; Ahn, Ducksun; Lai, Chi-Wan; Nara, Nobuo; Shaw, Kevin

    2017-12-01

    In an age of globalized medical education, medical school accreditation has been hailed as an approach to external quality assurance. However, accreditation standards can vary widely across national contexts. To achieve recognition by the World Federation for Medical Education (WFME), national accrediting bodies must develop standards suitable for both local contexts and international recognition. This study framed this issue in terms of "glocalization" and aimed to shine light on this complicated multistakeholder process by exploring accreditation in Taiwan, South Korea, and Japan. This study employed a comparative case-study design, examining the national standards that three accreditation bodies in East Asia developed using international reference standards. In 2015-2016, the authors conducted document analysis of the English versions of the standards to identify the differences between the national and international reference standards as well as how and why external standards were adapted. Each country's accreditation body sought to balance local needs with global demands. Each used external standards as a template (e.g., Liaison Committee on Medical Education, General Medical Council, or WFME standards) and either revised (Taiwan, South Korea) or annotated (Japan) the standards to fit the local context. Four categories of differences emerged to account for how and why national standards departed from external references: structural, regulatory, developmental, and aspirational. These countries' glocalization of medical accreditation standards serve as examples for others seeking to bring their accreditation practices in line with global standards while ensuring that local values and societal needs are given adequate consideration.

  18. 78 FR 9899 - National Committee on Foreign Medical Education and Accreditation

    Science.gov (United States)

    2013-02-12

    ... DEPARTMENT OF EDUCATION National Committee on Foreign Medical Education and Accreditation AGENCY: Office of Postsecondary Education, U.S. Department of Education, National Committee on Foreign Medical... National Committee on Foreign Medical Education and Accreditation (NCFMEA). Parts of this meeting will be...

  19. 77 FR 49788 - National Committee on Foreign Medical Education and Accreditation

    Science.gov (United States)

    2012-08-17

    ... DEPARTMENT OF EDUCATION National Committee on Foreign Medical Education and Accreditation AGENCY: Office of Postsecondary Education, U.S. Department of Education, National Committee on Foreign Medical... National Committee on Foreign Medical Education and Accreditation (NCFMEA). Parts of this meeting will be...

  20. 42 CFR 410.142 - CMS process for approving national accreditation organizations.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false CMS process for approving national accreditation... Diabetes Self-Management Training and Diabetes Outcome Measurements § 410.142 CMS process for approving national accreditation organizations. (a) General rule. CMS may approve and recognize a nonprofit or not...