WorldWideScience

Sample records for compounds capteurs chimiques

  1. Chemical decontamination. I. Dephosphorylation of organophosphorus compounds; Decontamination chimique. I. Dephosphorylation des composes organophosphores

    Energy Technology Data Exchange (ETDEWEB)

    Segues, B.; Perez, E.; Rico-Lattes, I.; Riviere, M.; Lattes, A. [Toulouse-3 Univ., 31 (France)

    1996-12-31

    This work describes investigations of methods for the destruction of wastes containing toxic phosphorus esters due to the use of pesticides or chemical weapons. Compounds are destroyed by basic hydrolysis in various structured media (micellar catalysis) in the presence and absence of additives, in both water and mixed micellar media. Different methods are compared and evaluated 40 refs.

  2. Développement des micro-capteurs chimiques CHEMFETs pour des applications à l'hémodialyse

    OpenAIRE

    Sant , William

    2004-01-01

    This work lies within the scope of the microtechnological development for the medical analysis improvement. It proposes to improve the comfort of the haemodialysed patient by monitoring the dialysis effectiveness. It aims at the development of disposable ChemFETs chemical microsensors for the detection of the H+ ions, urea and creatinin. The principle of detection is based on the realisation of an enzymatic layer on top of the ChemFET pH-sensitive gate. Thus, The enzymatic reaction is respons...

  3. CARACTERISATION PHYSICO-CHIMIQUE ET POTENTIALITES ...

    African Journals Online (AJOL)

    AISA

    Le pois sucré (Cyperus esculentus L. Cyperaceae) présente des potentialités insuffisamment exploitées sur le plan nutritionnel. Afin de contribuer à la connaissance de ce produit, une enquête a été menée auprès d'une frange de la population d'Abidjan (Côte d'Ivoire). Des analyses physiques et chimiques ont été.

  4. Composition chimique de l'huile essentielle de Satureja calamintha ...

    African Journals Online (AJOL)

    Ce travail vise l'étude de la composition chimique de l'huile essentielle de Satureja calamintha (L.) Scheele du Maroc. Les constituants chimiques principaux de cette huile essentielle sont borneol (34.52%), αcampholenic aldehyde (14.26%), cedren-13-ol (6.45%), et manoyloxide (3.78%). Mots-clés : huile essentielle, ...

  5. 12 Conception et réalisation des capteurs hybrides photovoltaïque ...

    African Journals Online (AJOL)

    user

    hybrides photovoltaïque-thermiques à air intégrables en toitures des bâtiments. Pour ces .... de la position du moyen de stockage sur les performances du système. ... propriétés thermo-physiques des matériaux sont supposées constantes et .... L'évolution des températures de tous les éléments des capteurs atteignent le.

  6. Toxicological study of a polyphenyl-type chemical compound used by the thermal transfer department; Etude toxicologique d'un produit chimique du type polyphenyle utilise par la section des transferts thermiques

    Energy Technology Data Exchange (ETDEWEB)

    Rinaldi, R.; Alix, D.

    1961-07-01

    This note reports an experimentation of toxicological tests performed on two mice breed by different ways (skin absorption, respiratory route, digestive tract) in order to assess the toxicology of a chemical compound containing a bi-phenyl eutectic and bi-phenyl oxide. The authors describe effects noticed among mice depending on the absorption way. They notice the caustic action of the product, but that an accidental absorption through the digestive tract would not result in an acute and severe intoxication. As far as chronic intoxication is concerned, daily inhalations do not seem to have any haematological impact on mice.

  7. Commande Vectorielle Sans Capteur d’un Moteur Asynchrone Associée à un Observateur de Kubota

    Directory of Open Access Journals (Sweden)

    Karim Negadi

    2014-03-01

    Full Text Available Cette étude concerne l'observation et la commande du moteur asynchrone sans capteur mécanique. L'objectif est de proposer une loi de commande sans capteur mécanique utilisant un observateur adaptatif estimant la vitesse, sur la base d’un mécanisme d’adaptation de Kubota. Le but principal est de parvenir à un contrôle simple, adaptatif et performant, ce qui va nous permettre de tester et d'évaluer les performances de l’observateur proposé, associé à la commande sans capteur du moteur asynchrone, en ayant comme informations disponibles les courants et les tensions statoriques. L’algorithme proposé consiste en un observateur reconstruisant les composantes du flux rotorique et un mécanisme basé sur un l’algorithme de Kubota, et générant la loi d’adaptation pour l’estimation de la vitesse. Des tests sont effectués et validés par voie expérimentale, les résultats obtenus illustrent de bonnes performances en terme de robustesse, vis-à-vis des variations des paramètres du moteur et montrent l’excellente qualité de la loi de commande associée à l'observateur, malgré les problèmes d'observabilité lorsque le moteur fonctionne à basse vitesse.

  8. Comparative Studies of Chemical Effects following Nuclear Reactions and Transformations on Metal Organic Phenyl Compounds; Etudes Comparatives des Effets Chimiques Induits par les Reactions et les Transformations Nucleaires sur des Composes Phenylmetalliques; 0421 0420 0410 0414 ; Estudios Comparativos de los Efectos Quimicos de las Reacciones y Transformaciones Nucleares en Compuestos Fenil-Organometalicos

    Energy Technology Data Exchange (ETDEWEB)

    Merz, E.; Riedel, H. J. [Kernforschungsanlage, Juelich, Federal Republic of Germany (Germany)

    1965-04-15

    A study of the chemical effects created by the energetic recoil atoms of nuclear reactions in solids and liquids was made on the basis of a broad comparison of the products formed by (n, {gamma}) and (n, 2n) processes in the metalphenyl compounds of germanium, tin, lead, arsenic and antimony. In addition, the radioactive recoil products formed after the K-capture process on Ge{sup 68} - tetraphenyl are compared with the results from the (n, {gamma}) -process on Ga-triphenyl and the (n,p) process on Ge-tetra phenyl. Finally, the studies include the {beta}{sup -} transition on Ge{sup 77}-tetraphenyl to As{sup 77}. Applying different separation methods, e.g. adsorption chromatography on alumina, ion exchange and electrophoresis, the various radioactive recoil products were separated and the individual yields determined. It was found that in nuclear reactions the compounds of the mentioned metals having identical ligands formed practically the same classes of recoil products. The yield distribution however reveals characteristic alterations between the (n, {gamma}) and (n, 2n) reaction. Only a small influence on the yields is perceptible when irradiations are performed in liquids and solutions. The large differences found for the new compounds formed by nuclear transformations are striking, not only in the kind of typical products but also in their percentage yields. Thus, several recoil products of Ge and Ga with metalorganic character were found by nuclear reactions on Ge-tetraphenyl that could not be detected at all by the K-capture process on Ge{sup 68}-tetraphenyl. The {beta}{sup -} decay on Ge{sup 77}-tetraphenyl produces practically the same chemical compounds as were observed by nuclear reactions. However, a remarkable increase in the portion of the labelled parent molecules (retention) is typical for the {beta}{sup -} transition. The results are discussed on the basis of theoretical considerations of the amount of kinetic energy transferred to the reacting

  9. Impacts des caractéristiques physico-chimiques des eaux sur la ...

    African Journals Online (AJOL)

    Impacts des caractéristiques physico-chimiques des eaux sur la distribution du ... chimiques qui sont à l'origine d'une dégradation croissante de la qualité d'eau. ... Les valeurs d'indice de diversité de Shannon Weaver traduisent une grande ...

  10. MODELISATION ET REALISATION D’UN CAPTEUR-STOCKEUR SOLAIRE A CUVE CYLINDRIQUE AVEC CONCENTRATEUR PARABOLIQUE COMPOSE.

    OpenAIRE

    HADJIAT, Mohammed Moundji

    2014-01-01

    Le but de ce travail est l’étude théorique et expérimentale d’un chauffe-eau solaire de type capteur stockeur. Ce dispositif est composé d’une cuve de stockage cylindrique disposée sur la ligne focale d’un réflecteur solaire en forme de concentrateur parabolique composé « CPC ». Cette cuve peinte en noir mat joue en même temps le rôle d’absorbeur et de stockeur d’eau chaude. Pour cela nous avons d’abord construit un modèle mathématique qui permet de calculer la température moye...

  11. The Use of the Moessbauer Effect in Investigating the Chemical Effects of Nuclear Transmutations in Oxygenous Compounds of Manganese and Tin; Utilisation de l'Effet Moessbauer pour l'Etude des Effets Chimiques des Transformations Nucleaires dans les Composes de Manganese et d'Etain; 0418 0421 0421 041b 0415 0414 ; Empleo del Efecto Moessbauer para Investigar las Transformaciones Nucleares de Compuestos Oxigenados de Estano y de Manganeso

    Energy Technology Data Exchange (ETDEWEB)

    Nesmejanov, An. N.; Babeshkin, A. M.; Kosev, N. P.; Bekker, A. A.; Lebedev, V. A. [Moskovskij Gosudarstvennyj Universitet Im. M.V. Lomonosova, Moskva, SSSR (Russian Federation)

    1965-04-15

    The customary methods of studying the chemical state of recoil atoms, i. e. those connected with phase transitions (chemical analysis, chromatography, electrophoresis) and also the annealing technique, permit only indirect judgments as to the stabilization mechanism of hot atoms. In analysis with the method of resonance absorption of non-recoil gamma-quanta, no changes are introduced into the sample that could influence the forms of stabilization, even where stability is not very great. In the present study we investigated the forms of stabilization of Mn56 recoil atoms in irradiated solutions and solid samples of permanganate, and of Sn{sup 119m} recoil atoms in stannic oxide and stannous oxide. The permanganate samples were irradiated in a paraffin block with a polonium-beryllium source at a neutron flux of 10{sup 7} - 10{sup 8} n/cm{sup 2}. s. The hot Mn{sup 56} atoms are formed in the +7, +4 and lower valency states. From samples (SnO and SnO{sub 2}) irradiated in a reactor for 1800 h at a flux of 2.2 x 10{sup 13} n/cm{sup 2}. s, sources were prepared directly for a study of the resonance absorption of gamma-quanta in an apparatus operating at constant speed. Suitable compounds of tin were used as absorbers. The Sn{sup 119m} recoil atoms were detected only in the +4-valency state. The data obtained are taken as the basis for a discussion of the stabilization mechanism of recoil atoms. (author) [French] Les methodes habituellement appliquees pour etudier l'etat chimique des atomes de recul (analyse chimique, chromatographie, electro- phorese) sont liees, comme le recuit, aux transitions de phases et ne permettent de determiner le mecanisme de stabilisation des atomes chauds que d'une facon indirecte. Lorsque l'analyse est faite au moyen d'une methode fondee sur l'absorption par resonance des phonons sans recul, l'echantillon ne subit aucune modification pouvant exercer une influence sur les formes de stabilisation, meme si ces formes sont peu durables. Les

  12. Intégration de données temps-réel issues de capteurs dans un entrepôt de données géo-décisionnel

    OpenAIRE

    Mathieu, Jean

    2011-01-01

    Nous avons pu, au cours des dernières années, assister à une augmentation du nombre de capteurs utilisés pour mesurer des phénomènes de plus en plus variés. En effet, nous pouvons aujourd'hui utiliser les capteurs pour mesurer un niveau d'eau, une position (GPS), une température et même le rythme cardiaque d'un individu. La grande diversité de capteurs fait d'eux aujourd'hui des outils par excellence en matière d'acquisition de données. En parallèle à cette effervescence, les outils d'analyse...

  13. Development of electrochemical gas sensors for the monitoring of air pollution; Developpement de capteurs de gaz electro-chimiques pour le controle de la pollution de l'air

    Energy Technology Data Exchange (ETDEWEB)

    Billi, E.

    2003-01-15

    In this work, 2 types of ceramic gas sensors obtained by serigraphy have been considered. The first one allows to detect CO and NO{sub x} concentrations in combustion processes. An {alpha} alumina protective coating has been deposited by serigraphy to protect the sensor from the abrasive particulates of the gas flow. A precursor gel has been used instead of the inorganic binder of the serigraphy ink in order to improve the durability of the sensor and to control the porosity of the protective layer. The second type of sensor allows to detect CO{sub 2} in urban environments. It has been entirely developed in this work, from the choice of sensible materials (Nasicon and yttrium zirconia - YSZ) and of the auxiliary electrode (a mixture of Pt and Na{sub 2}CO{sub 3} ink), to the sol-gel synthesis of sensible materials, the realization of serigraphy inks, the deposition of layers and their characterization. However, because of a chemical reaction at the interface of the layers the sensor could not work. Thus, the interface has been characterized by electron microscopy and the chemical reaction is due to a diffusion of yttrium inside Nasicon where it partially substitutes to Zr and changes the structure. Therefore, another sensor has been made using {beta} alumina which does not react with YSZ. The sensor has been electrically characterized and shows a good sensitivity to CO{sub 2} concentration changes between 0.1 and 10000 ppm and a good stability. (J.S.)

  14. Sol-gel process preparation and evaluation of the analytical performances of an hydrazine specific chemical sensor; Preparation par procede sol-gel et evaluation des performances analytiques d`un capteur chimique specifique de l`hydrazine

    Energy Technology Data Exchange (ETDEWEB)

    Gojon, C

    1996-12-01

    The realisation of optical fibers active chemical collector to analyze hydrazine in line, in the spent fuel reprocessing process is the subject of this work. The p.dimethyl-amino-benzaldehyde has been chosen as reagent for its chemical and optical properties. 186 refs.

  15. Typologie physico-chimique et métallique des eaux du fleuve ...

    African Journals Online (AJOL)

    ... la sucrerie sénégalaise C.S.S. polluent en Al2+ et Sr2+ d'autres stations. Mais, d'une manière générale les teneurs des éléments chimiques évalués sont dans les nomes de l'eau d'irrigation. Mots-clés : eau potable, eau usée, pollution, concentration métallique, paramètres physico-chimiques, fleuve Sénégal, Mauritanie ...

  16. Etude de la qualité physico-chimique et biologique des eaux du ...

    African Journals Online (AJOL)

    Etude de la qualité physico-chimique et biologique des eaux du fleuve Niger à Niamey. ... le récepteur principal des rejets d'eaux usées de la ville de Niamey, capital du ... La description de ces taxons montre une variation de la structure des ...

  17. Evaluation des changements physico-chimiques caractérisant le ...

    African Journals Online (AJOL)

    Evaluation des changements physico-chimiques caractérisant le mûrissement au cours de l'entreposage de trois variétés de bananes Musa spp. (AAB, cv. Corne 1 ; AAA, cv. Poyo et AA, cv. Figue Sucrée)

  18. 135 Suivi de la qualité physico-chimique et bactériologique des ...

    African Journals Online (AJOL)

    ZIGLA

    1Laboratoire de Chimie des Eaux, des Sols et Environnements, Ecole Nationale ... des caractéristiques physico-chimiques et biologiques du biotope [2-4]. ..... les engrais utilisés pour l'agriculture pratiquée le long des cours d'eau et de.

  19. Impacts des caractéristiques physico-chimiques des eaux sur la ...

    African Journals Online (AJOL)

    The present study was undertaken to assess the impact of the physico-chemical characteristics of water on the ..... Il est composé de 4 espèces ... Figure 4 : Plan factoriel F1 x F2 des variables physico-chimiques en fonction du phytoplancton.

  20. Caractérisation hydro chimique des eaux souterraines de la region ...

    African Journals Online (AJOL)

    SARAH

    30 sept. 2014 ... hydro chimique qui utilise le diagramme triangulaire de Piper et des méthodes statistiques multi variées ..... échantillons et 12 variables (la conductivité électrique. (CE), le pH, la ..... Gafsa Nord (Tunisie centrale). Journal des.

  1. 77 Composition chimique de l'huile essentielle de Satureja calamintha

    African Journals Online (AJOL)

    PR BOKO

    Composition chimique de l'huile essentielle de Satureja calamintha (L.) Scheele du Maroc. Abdellah ECH-CHAHAD1*, Hanane FARAH2 et Lahboub BOUYAZZA2. 1Université Sidi Mohamed Ben Abdellah, Institut National des Plantes Aromatiques et Médicinales,. BP 159 Taounate, Maroc. 2Université Hassan I, Faculté ...

  2. Évaluation de la qualité physico-chimique des eaux d'adduction ...

    African Journals Online (AJOL)

    SARAH

    30 nov. 2015 ... d'adduction publique de la Société Tchadienne des Eaux à N'djamena au Tchad ... de faire une étude comparée de la qualité physico-chimique des ... présenteraient pas de danger majeur pour la santé de la population.

  3. Nouvelle structure de capteur à courants de Foucault et algorithme associé pour la mesure des propriétés électrique et magnétique d'un métal

    Science.gov (United States)

    Lê, Minh-Quang; Placko, Dominique

    1995-06-01

    This paper describes a new structure for eddy-current transducers which improves sensitivity while maintaining high lateral resolution. We have developed an analytical model to allow a model-based inversion from transducers signals to estimate thick and homogeneous plates electrical conductivity, magnetic permeability and/or lift-off. The inversion procedure is described and shows the possibility of a precise simultaneous estimation of the three parameters. Experiments were conducted with magnetic and non magnetic metals. Cet article décrit une nouvelle structure de capteur à courants de Foucault qui permet d'améliorer la sensibilité du capteur tout en conservant sa résolution latérale. Nous avons développé un modèle analytique de ce capteur qui peut être inversé pour estimer la conductivité électrique, la perméabilité magnétique d'une cible homogène et/ou la distance capteur-cible. La procédure d'inversion a été décrite et montre une possibilité d'estimer ces trois paramètres avec précision. L'expérience a été effectuée sur des métaux magnétiques et amagnétiques.

  4. Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

    Science.gov (United States)

    Fall, H.; Charon, W.; Kouta, R.

    2002-12-01

    Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

  5. Etude de la qualité physico-chimique de l'eau de boisson dans deux ...

    African Journals Online (AJOL)

    L'eau, source potentielle de vie, doit subir diverses analyses physico-chimiques qui définiront sa qualité pour la consommation humaine afin d'éviter les risques de maladies hydriques pour les consommateurs. La présente étude vise à déterminer la qualité physico-chimique de l'eau de boisson des populations de deux ...

  6. Évaluation des effets des pesticides utilisés en lutte chimique contre ...

    African Journals Online (AJOL)

    SARAH

    30 avr. 2015 ... RÉSUMÉ. Objectif : Les traitements chimiques constituent encore la principale méthode utilisée pour lutter contre le. Criquet pèlerin en période de recrudescence ou d'invasion. Les pesticides ne sont pas très spécifiques dans la plupart des cas, ils peuvent avoir des effets négatifs sur les composantes ...

  7. Qualité physico-chimique et nutritionnelle des oeufs de poule locale ...

    African Journals Online (AJOL)

    L'évaluation de la qualité physico-chimique et nutritionnelle des oeufs issus de poule locale et de race améliorée consommés à Ouagadougou au Burkina Faso a porté sur deux cent oeufs répartis en deux lots respectifs de 100 oeufs de race locale et 100 oeufs de race améliorée. Les valeurs des paramètres physiques ont ...

  8. Effets du travail du sol sur le comportement chimique et biologique ...

    African Journals Online (AJOL)

    SARAH

    31 juil. 2017 ... RESUME. Objectif : L'objectif de cette étude est de comparer les effets de six techniques culturales de mise en place du blé tendre sur certaines propriétés chimiques et biologiques du sol et les conséquences sur le rendement grain et ses composantes dans la région «non chernozem» en 7ème années ...

  9. Etude physico-chimique et minéralogique comparative des ...

    African Journals Online (AJOL)

    La valorisation des ressources locales constitue un impératif afin d'atteindre des objectifs de développement durable. Cette étude a consisté à évaluer les caractéristiques physiques, chimiques et minéralogiques d'une argile provenant de Mbodiène (Sénégal), l'attapulgite, comparativement avec un médicament ...

  10. Caractérisation physico-chimique et géotechnique de deux sites ...

    African Journals Online (AJOL)

    produits après séchage ont aussi une grande importance (Camille, 2010). Dans un souci de valorisation des matériaux utiles du Bénin, le présent travail est consacré à une caractérisation géotechnique, physico-chimique et thermique des sols prélevés dans la région de Parakou. (Baka) et de Ketou (Etigbo) en vue de leur.

  11. Impacts de l'utilisation des Engrais chimiques sur les cultures ...

    African Journals Online (AJOL)

    L'analyse des résultats a montrée que Solanum macrocarpum et amarantus hybridus sont les légumes les plus cultivés respectivement 69% et 21% à cause de leurs préférences dans l'alimentation des consommateurs.Les proportions des maraîchers utilisant les engrais chimiques ou non ou encore les deux couplés sont ...

  12. Caractéristiques physico-chimiques de l'eau des puits dans la ...

    African Journals Online (AJOL)

    Objectif : L'objectif de cette étude est d'évaluer la qualité de l'eau des puits à partir de ses caractéristiques physico-chimiques dans la commune de Pobè. Méthodologie et résultats : L'étude entreprise entre juin 2012 et mars 2013 a permis de mesurer au niveau de quinze puits les paramètres physiques tels que le pH, ...

  13. Récupération de l'énergie micro-onde pour l'alimentation de capteurs sans fil à bord des satellites

    OpenAIRE

    Okba , Abderrahim; Takacs , Alexandru; Aubert , Hervé; Fredon , Stéphane; Despoisse , Laurent

    2015-01-01

    National audience; La récupération d'énergie micro-onde à bord des satellites de télécommunication géostationnaires est abordée dans cette communication. Plusieurs topologies de rectennas sont proposées. Certaines d'entre elles, très compactes, permettent de récupérer des puissances DC de l'ordre de 1 mW. Ces résultats montrent que la récupération d'énergie micro-onde représente une solution intéressante pour l'alimentation des capteurs autonomes sans fil utilisés pour le suivi de l'état de f...

  14. L'effet Peltier appliqué à la conception et la réalisation d'un nouveau capteur de débit massique

    Science.gov (United States)

    Wattiau, F.; Gaviot, E.; Thery, P.

    1993-08-01

    éalisation d'un nouveau capteur de débit massique basé sur l'effet Peltier. Le capteur en forme de circuit imprimé bimétallique, comporte plusieurs pistes métalliques continues parallèles entre elles et partiellement recouvertes par un grand nombre de dépôts électrolytiques de nature différente. Un tel circuit se comporte comme un circuit thermoélectrique classique dans lequel les parties homogènes non recouvertes par le dépôt électrolytique constituent le premier conducteur du couple, les parties plaquées constituant le second conducteur. La méthode de mesure consiste à faire passer un courant électrique dans une ou plusieurs pistes constituant le circuit émetteur de façon à générer par effet Peltier des gradients thermiques qui seront détectés par un circuit détecteur identique placé à proximité. Dans le cas particulier d'un fluide au repos, la f.e.m. détectée par le circuit détecteur dépend de la conductivité thermique du fluide. Lorsque le fluide est en mouvement relatif par rapport au circuit, il est possible de détecter une f.e.m. dépendant en grandeur et en signe de la vitesse d'écoulement du fluide. A titre d'application un capteur de débit massique a été réalisé en plaçant les circuits thermoélectriques dans une canalisation parcourue par le fluide en mouvement.

  15. Répartition des paramètres physico-chimiques et métalliques des ...

    African Journals Online (AJOL)

    ibaa

    eaux usées modifient la composition physico-chimique des eaux salines des côtes dakaroises jusqu'à 40 m du point de rejets. ... qualité biologique et du degré de la pollution de ce milieu. ..... L'ammoniac d'Origine Agricole : impacts sur la ...

  16. Optimisation de Capteurs de Diagnostic de Défauts par Réflectométrie dans les Réseaux Filaires Complexes en utilisant les Réseaux Bayésiens

    OpenAIRE

    BEN HASSEN , Wafa; Auzanneau , Fabrice; Pérès , François; Tchangani , Ayeley

    2013-01-01

    Cet article presente une strat ' egie de diagnostic ' distribuee par la m ' ethode de r ' eflectom ' etrie dans un r ' eseau ' filaire complexe. L'idee principale consiste ' a injecter un signal ' de test en plusieurs points du reseau et r ' ecup ' erer, ensuite, le ' signal refl' echi afin d'en d ' eduire les caract ' eristiques du d ' efaut ' detect ' e. L'objectif de cet article est d'optimiser le nombre de ' capteurs a impl ' ementer dans le r ' eseau afin de r ' eduire le co ' ut du ˆ systeme...

  17. Evolution of nuclear chemical industry in France; Evolution de l'industrie chimique nucleaire en France

    Energy Technology Data Exchange (ETDEWEB)

    Fould, M H [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    'impulsion du CEA, mais aussi de maitres d'oeuvres tels qu'Electricite de France et la Marine Marchande, l'effort nucleaire fran is atteint pour les annees 1957-1961, environ 600 milliards de francs: plus de la moitie de cette somme sera depensee par l'industrie chimique en recherches, installations pilotes, constructions d'usines et livraisons. Faire bien, vite et rentable sont les buts recherches. Ces objectifs sont atteints grace a une collaboration intime des grands services de l'etat et de l'industrie privee. Ce gros effort s'exerce principalement dans les voies suivantes: - Un traitement chimique pousse de tonnages croissants des minerais de l'Union fran ise, visant a produire un uranium pur, abondant et bon marche. - Une preparation soigneuse de combustibles nucleaires economiques et parfaitement adaptes aux divers types de reacteurs en fonctionnement ou en construction. - Un retraitement des combustibles irradies pour en extraire le plutonium de facon complete ainsi que l'uranium et certains produits de fission. - Une fabrication industrielle des materiaux nucleairement purs ou resistants a la corrosion exiges par la technologie des reacteurs producteurs d'energie et de recherches. - La fourniture aux multiples utilisateurs etrangers et fran is d'isotopes et de traceurs radioactifs reclames par la medecine, l'industrie et l'agriculture en nombre toujours croissant. - Un traitement chimique meticuleux des effluents gazeux ou liquides dans des stations au controle rigoureux afin de rendre les reacteurs et leurs annexes parfaitement surs d'emploi. Cet expose aura montre l'ampleur de l'effort deploye par une industrie chimique nucleaire jeune, dynamique et en plein essor. Ayant assure ses techniques, realise de nombreuses installations, elle est largement en etat de faire face au programme atomique fran is. En outre, elle est capable et desireuse d'etre associee aux developpements de l'industrie atomique etrangere notamment dans te cadre de l'Euratom et d

  18. Structural studies of type N superconductive compounds: R{sub 2-x}Ce{sub x}CuO{sub 4{+-}{delta}} (R = Gd, Eu, Sm, Nd, Pr); influences of chemical treatments on physical properties; Etudes structurales des composes supraconducteurs de type N: R{sub 2-x}Ce{sub x}CuO{sub 4{+-}{delta}} (R = Gd, Eu, Sm, Nd, Pr); influences des traitements chimiques sur les proprietes physiques

    Energy Technology Data Exchange (ETDEWEB)

    Vigoureux, P

    1995-06-01

    Different chemical treatments of R{sub 2-x}Ce{sub x}CuO{sub 4{+-}{delta}} compounds monocrystals (gadolinium, europium, samarium, neodymium and praseodymium cuprates) modify their physical properties especially their superconductive properties. The presented chemical treatments are: the substitution of the trivalent rare earth element R by an other trivalent lanthanide, its substitution by tetravalent cerium, and heat treatment under low oxygen pressure. After these chemical treatments, structural modifications are observed by neutrons and X-rays diffraction, and allow to precise their actions: size effect of the rare earth element on the deformation of the CuO{sub 2} planes, links between deformation and superconductivity and magnetic properties. (A.B.). 394 refs/.

  19. Croissance epitaxiale de GaAs sur substrats de Ge par epitaxie par faisceaux chimiques

    Science.gov (United States)

    Belanger, Simon

    La situation energetique et les enjeux environnementaux auxquels la societe est confrontee entrainent un interet grandissant pour la production d'electricite a partir de l'energie solaire. Parmi les technologies actuellement disponibles, la filiere du photovoltaique a concentrateur solaire (CPV pour concentrator photovoltaics) possede un rendement superieur et mi potentiel interessant a condition que ses couts de production soient competitifs. La methode d'epitaxie par faisceaux chimiques (CBE pour chemical beam epitaxy) possede plusieurs caracteristiques qui la rendent interessante pour la production a grande echelle de cellules photovoltaiques a jonctions multiples a base de semi-conducteurs III-V. Ce type de cellule possede la meilleure efficacite atteinte a ce jour et est utilise sur les satellites et les systemes photovoltaiques a concentrateur solaire (CPV) les plus efficaces. Une des principales forces de la technique CBE se trouve dans son potentiel d'efficacite d'utilisation des materiaux source qui est superieur a celui de la technique d'epitaxie qui est couramment utilisee pour la production a grande echelle de ces cellules. Ce memoire de maitrise presente les travaux effectues dans le but d'evaluer le potentiel de la technique CBE pour realiser la croissance de couches de GaAs sur des substrats de Ge. Cette croissance constitue la premiere etape de fabrication de nombreux modeles de cellules solaires a haute performance decrites plus haut. La realisation de ce projet a necessite le developpement d'un procede de preparation de surface pour les substrats de germanium, la realisation de nombreuses sceances de croissance epitaxiale et la caracterisation des materiaux obtenus par microscopie optique, microscopie a force atomique (AFM), diffraction des rayons-X a haute resolution (HRXRD), microscopie electronique a transmission (TEM), photoluminescence a basse temperature (LTPL) et spectrometrie de masse des ions secondaires (SIMS). Les experiences ont permis

  20. Qualité chimique et biologique du bassin de la Semois (partie Belge

    Directory of Open Access Journals (Sweden)

    LECLERCQ L.

    1996-04-01

    Full Text Available Les eaux du bassin de la Semois belge ont été étudiées, en 25 stations, sous différents aspects complémentaires : chimie, diatomées et invertébrés benthiques. Les méthodes utilisées sont l'indice de pollution organique (IPO, LECLERCQ et VANDEVENNE, 1987, un indice diatomique (ID, LECLERCQ, non publié et l'indice biologique global normalisé (IBGN, AFNOR, 1992. Grâce aux analyses chimiques et diatomiques, nous décrivons différents types d'eaux naturelles, à minéralisation croissante, et différents niveaux de pollution et d'eutrophication. Nous présentons une carte d e qualité détaillée, à l'usage des gestionnaires. Les diatomées apparaissent comme les bioindicateurs les plus fiables pour ces paramètres. Les invertébrés sont moins intéressants à utiliser. Ils sont pratiquement insensibles au type de minéralisation de l'eau (tout au moins au niveau de la famille, qui est le seul niveau d'identification possible en routine, mais ces organismes peuvent être plus sensibles au facteur substrat qu'à la pollution organique, conduisant alors à des estimations erronées.

  1. Chemical products toxicological tests performed on lake and river fish; Essai toxicologiques de produits chimiques sur des poissons d'eau douce

    Energy Technology Data Exchange (ETDEWEB)

    Teulon, F.; Simeon, C. [Commissariat a l' Energie Atomique, Centre de Pierrelatte (France). Centre d' Etudes Nucleaires

    1966-07-01

    The volume and toxical values of industrial and urban effluents are growing higher and therefore acute or chronic pollution hazard is proportionally increased. Hence it is necessary to determine the effluent components minimum lethal dose for fish (one hour or six hours according to applicable standards). The following tests are described in this report: toxicity of some chemical products, tested individually (sodium, sulphate, sodium chloride, sodium fluoride, etc...); toxicity of some metal ions (Al{sup 3+}, Fe{sup ++}, Fe{sup 3+}, Pb{sup ++}, etc...); toxicity of certain mixed compounds for various fish species (sun perch, tench, gold fish, roach, gudgeon, bleak). The test results obtained represent local values and may be used for reference and as a general basis for other investigation and calculation of the effluents data when released. (author) [French] Le volume et la toxicite des effluents industriels et urbains deviennent de plus en plus importants, les risques de pollution aigue ou chronique croissent en proportion. Il est donc necessaire de determiner les doses minima mortelles pour le poisson (1 h ou 6 h, d'apres les conventions) des composants eventuels des effluents consideres. Les essais qui font l'objet de ce rapport sont les suivants: toxicite de quelques produits chimiques, pris separement (sulfate, chlorure, fluorure de sodium, etc...); toxicite de quelques ions metalliques: Al{sup 3+}, Fe{sup ++} et Fe{sup 3+}, Pb{sup ++}, etc...); toxicite de quelques melanges sur des especes differentes de poissons ( perche-soleil, tanche, carassin, gardon, goujon, ablette). Les chiffres obtenus representent des valeurs locales et peuvent servir de references et de base de travail pour le calcul des caracteristiques des effluents a leur rejet. (auteur)

  2. Chemical treatment of uranium ores in France; Le traitement chimique des minerais d'uranium en France

    Energy Technology Data Exchange (ETDEWEB)

    Mouret, P; Sartorius, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The various processes of chemical treatmenturanium ores, from the oldest to the more recent, are exposed, considering the following conditions: economics, geography, techniques and safety. The interest of obtaining a final concentrate as uranyl nitrate is discussed. (author)Fren. [French] Les differents procedes de traitement chimique des minerais uraniferes sont exposes depuis les premiers jusqu'aux plus recents, en tenant compte des facteurs economiques, geographiques, techniques et de salubrite. L'interet d'obtenir un concentre final a l'etat de nitrate d'uranyle est discute. (auteur)

  3. Contrôle non destructif par courants de Foucault : expérience et modélisation pour la conception et l'optimisation de capteurs

    Science.gov (United States)

    Bonnin, O.; Cahouet, J.; Giordano, P.

    1993-03-01

    more accurate comparison, for example on the crack depth, is difficult because of the uncertainty on the physical properties of the materials. Dans le cadre d'un projet industiel de conception et d'optimisation de capteurs pour la recherche de fissures par courants de Foucault sur les plate-formes de forage, on présente les études menées pour la modélisation du système. La simulation des phénomènes implique à priori une modélisation tridimensionnelle, certes précise, mais difficile et coûteuse. On cherche à en limiter le coût en combinant une modélisation bidimensionnelle en l'absence de défaut, et une modélisation tridimensionnelle locale en présence d'une fissure. Après avoir présenté le projet et l'étude expérimentale qui en découle, on décrit les techniques de modélisation qui ont été employées.

  4. La micro-échelle en synthèse organique : un outil commun chimie/génie chimique

    OpenAIRE

    Prat , Laurent E.; Loubiere , Karine; Dechy-Cabaret , Odile

    2014-01-01

    National audience; Cet article est une restitution courte de la présentation réalisée au cours des JIREC 2013 sur l'enseignement de la notion de changement d'échelle et de passage d'un mode batch à un mode continu en synthèse organique. L'enjeu est de faire travailler des étudiants issus des départements chimie et génie chimique autour d'un même outil, le microréacteur. Au cours d'une séance de travaux pratiques, les étudiants mettent en oeuvre une synthèse organique en continu à micro-échell...

  5. Elaboration du Ge mesoporeux et etude de ses proprietes physico-chimiques en vue d'applications photovoltaiques

    Science.gov (United States)

    Tutashkonko, Sergii

    Le sujet de cette these porte sur l'elaboration du nouveau nanomateriau par la gravure electrochimique bipolaire (BEE) --- le Ge mesoporeux et sur l'analyse de ses proprietes physico-chimiques en vue de son utilisation dans des applications photovoltaiques. La formation du Ge mesoporeux par gravure electrochimique a ete precedemment rapportee dans la litterature. Cependant, le verrou technologique important des procedes de fabrication existants consistait a obtenir des couches epaisses (superieure a 500 nm) du Ge mesoporeux a la morphologie parfaitement controlee. En effet, la caracterisation physico-chimique des couches minces est beaucoup plus compliquee et le nombre de leurs applications possibles est fortement limite. Nous avons developpe un modele electrochimique qui decrit les mecanismes principaux de formation des pores ce qui nous a permis de realiser des structures epaisses du Ge mesoporeux (jusqu'au 10 mum) ayant la porosite ajustable dans une large gamme de 15% a 60%. En plus, la formation des nanostructures poreuses aux morphologies variables et bien controlees est desormais devenue possible. Enfin, la maitrise de tous ces parametres a ouvert la voie extremement prometteuse vers la realisation des structures poreuses a multi-couches a base de Ge pour des nombreuses applications innovantes et multidisciplinaires grace a la flexibilite technologique actuelle atteinte. En particulier, dans le cadre de cette these, les couches du Ge mesoporeux ont ete optimisees dans le but de realiser le procede de transfert de couches minces d'une cellule solaire a triple jonctions via une couche sacrificielle en Ge poreux. Mots-cles : Germanium meso-poreux, Gravure electrochimique bipolaire, Electrochimie des semi-conducteurs, Report des couches minces, Cellule photovoltaique

  6. Chemical treatment proceed of poor uranium content ores; Un procede de traitement chimique des minerais pauvres d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Mouret, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Pagny, P [Societe Potasse et Engrais Chimiques (France)

    1955-07-01

    The needs in uranium constantly increased inciting to develop new chemical processes for the treatment of uranium ores. we searched processes that permit to get this element from ores poor in uranium, to a reasonable cost price. We used a sulphuric attack and a precipitation of uranium as phosphate uranate or pyrophosphate uranate to separate its from the different impurities. The process permitted to process ores contents of about 0,05% of uranium and to get an end product of sodium carbonate uranate containing 60 to 65% of uranium, with an acceptable cost price and an extraction yield situated between 90 and 95%. (M.B.) [French] Les besoins sans cesse accrus en uranium ont incite de developper de nouveaux procedes chimiques pour le traitement de minerais uranifere. nous avons recherche des procedes qui permettent d'obtenir cet element a partir de minerais pauvres en uranium, a un prix de revient raisonnable. Nous nous sommes orientes vers une attaque sulfurique et une precipitation de l'uranium sous forme de phosphate uraneux ou de pyrophosphate uraneux pour le separer des differentes impuretes. Le procede a permis de descendre a des teneurs en uranium de l'ordre de 0,05 % et d'obtenir un produit final a l'etat d'uranate de soude contenant 60 e 65 % d'uranium, avec un prix de revient acceptable et avec un rendement global d'extraction situe entre 90 et 95 %. (M.B.)

  7. Application of the chemical properties of ruthenium to decontamination processes; L'application des proprietes chimiques du ruthenium a des procedes de decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Fontaine, A.; Berger, D. [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1965-07-01

    The chemical properties of ruthenium in the form of an aqueous solution of the nitrate and of organic tributylphosphate solution are reviewed. From this data, some known examples are given: they demonstrate the processes of separation or of elimination of ruthenium from radioactive waste. (authors) [French] Les proprietes chimiques du ruthenium en solutions aqueuses nitriques et en solutions organiques de tributylphosphate, sont passees en revue. A partir de ces donnees, quelques exemples connus sont cites: ils exposent des procedes de separation ou d'elimination du ruthenium de dechets radioactifs. (auteurs)

  8. Application of the chemical properties of ruthenium to decontamination processes; L'application des proprietes chimiques du ruthenium a des procedes de decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Fontaine, A; Berger, D [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1965-07-01

    The chemical properties of ruthenium in the form of an aqueous solution of the nitrate and of organic tributylphosphate solution are reviewed. From this data, some known examples are given: they demonstrate the processes of separation or of elimination of ruthenium from radioactive waste. (authors) [French] Les proprietes chimiques du ruthenium en solutions aqueuses nitriques et en solutions organiques de tributylphosphate, sont passees en revue. A partir de ces donnees, quelques exemples connus sont cites: ils exposent des procedes de separation ou d'elimination du ruthenium de dechets radioactifs. (auteurs)

  9. Method of chemical analysis of silicate rocks (1962); Methode d'analyse chimique des roches silicatees (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Pouget, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1962-07-01

    A rapid method of analysis for the physical and chemical determination of the major constituents of silicate rocks is described. Water losses at 100 deg. C and losses of volatile elements at 1000 deg. C are estimated after staying in oven for these temperatures, or by mean of a thermo-balance. The determination of silica is made by a double insolubilization with hydrochloric acid on attack solution with sodium carbonate; total iron and aluminium, both with calcium and magnesium, after ammoniacal precipitation of Fe and Al, are determined on the filtration product of silica by titrimetry-photometry of their complexes with EDTA. The alkalis Na and K by flame spectrophotometry, Mn by colorimetry of the permanganate, and Ti by mean of his complex with H{sub 2}O{sub 2}, are determined on fluosulfuric attack solution. Phosphorus is determined by his complex with 'molybdenum blue' on a fluoro-nitro-boric attack solution; iron is estimated by potentiometry, with the help of bichromate on hydrofluoric solution. (author) [French] Une methode d'analyse rapide est decrite pour la determination physico-chimique des constituants principaux des roches silicatees. Les pertes en eau a 100 deg. C et en matieres volatiles a 1000 deg. C sont evaluees apres passage au four a ces temperatures, ou a l'aide d'une thermobalance. La determination de la silice se fait par double insolubilisation a l'acide chlorhydrique, sur une attaque au carbonate de sodium; le fer total et l'aluminium ainsi que le calcium et le magnesium, apres precipitation a l'ammoniaque des deux premiers metaux, sont determines sur le filtrat de la silice par titrimetrie-photometrie de leurs complexes avec l'E.D.T.A. Les alcalins sodium et potassium par spectrophotometrie de flamme, le manganese par colorimetrie du permanganate, le titane a l'aide de son complexe avec l'eau oxygenee, sont determines sur une attaque fluosulfurique. Le phosphore est determine par son complexe du 'bleu de molybdene' sur une attaque fluo

  10. Analyse de l'emballement thermique d'un système chimique hybride non tempéré

    OpenAIRE

    Véchot , Luc; Bigot , Jean-Pierre; Minko , Wilfried ,; Kazmierczak , Marc; Vicot , Patricia

    2009-01-01

    National audience; Ce travail s'intéresse au “blow-down” (emballement thermique en présence d'un évent de sécurité) d'un système chimique non tempéré (30% CHP) soumis à un incendie. Il utilise une maquette à l'échelle 0,1 l. L'analyse des données post décomposition a montré que la vapeur présente est principalement un produit de la réaction. Toutes les expériences de blow-down ont présenté deux pics de pression, quel que soit le rapport A/V, ce qui est typique des systèmes non tempérés. Nous ...

  11. ETUDE ANALYTIQUE DES CARACTERES PHYSICO-CHIMIQUES ET HYDRIQUES DE DEUX TYPES DE BENTONITE (exemple de la bentonite de Maghnia et de la bentonite de Mostaganem)

    OpenAIRE

    MELKI, Abderrahim

    2015-01-01

    L'objectif de notre travail consiste a étudier les dépôts néogènes et essentiellement les dépôts argileux qui sont l'une des caractéristiques du bassin néogène du Bas Chélif et la plaine de Maghnia, présentant des propriétés spécifiques pour diverses applications. Des échantillons ont été prélevés en trois points des deux gisements. Les paramètres physico-chimiques et hydriques des échantillons d'argile bentonitique prélevés ont été analysés: l'indice de gonflement, la matière ...

  12. Organolanthanoid compounds

    International Nuclear Information System (INIS)

    Schumann, H.

    1984-01-01

    Up to little more than a decade ago organolanthanoid compounds were still a curiosity. Apart from the description of an isolated number of cyclopentadienyl and indenyl derivatives, very few significant contributions had been made to this interesting sector of organometallic chemistry. However, subsequent systematic studies using modern preparative and analytical techniques, together with X-ray single crystal structure determinations, enabled the isolation and characterization of a large number of very interesting homoleptic and heteroleptic compounds in which the lanthanoid is bound to hydrogen, to substituted or unsubstituted cyclopentadienyl groups, to allyl or alkynyl groups, or even to phosphorus ylides, trimethylsilyl, and carbonylmetal groups. These compounds, which are all extremely sensitive to oxygen and water, open up new possibilities in the field of catalysis and have great potential in organic synthesis - as recent studies with pentamethylcyclopentadienyl derivatives, organolanthanoid(II) compounds, and hexamethyllanthanoid complexes have already shown. (orig.) [de

  13. Multipurpose Compound

    Science.gov (United States)

    1983-01-01

    Specially formulated derivatives of an unusual basic compound known as Alcide may be the answer to effective treatment and prevention of the disease bovine mastitis, a bacterial inflammation of a cow's mammary gland that results in loss of milk production and in extreme cases, death. Manufactured by Alcide Corporation the Alcide compound has killed all tested bacteria, virus and fungi, shortly after contact, with minimal toxic effects on humans or animals. Alcide Corporation credits the existence of the mastitis treatment/prevention products to assistance provided the company by NERAC, Inc.

  14. Polymer compound

    NARCIS (Netherlands)

    1995-01-01

    A Polymer compound comprising a polymer (a) that contains cyclic imidesgroups and a polymer (b) that contains monomer groups with a 2,4-diamino-1,3,5-triazine side group. According to the formula (see formula) whereby themole percentage ratio of the cyclic imides groups in the polymer compoundwith

  15. Mesoionic Compounds

    Indian Academy of Sciences (India)

    Organic Chemistry. Kamatak University,. Dharwad. Her research interests are synthesis, reactions and synthetic utility of sydnones. She is currently working on electrochemical and insecticidal/antifungal activities for some of these compounds. Keywords. Aromaticity, mesoionic hetero- cycles, sydnones, tandem re- actions.

  16. Chemical Recovery of Energy in a Combined MHD-Steam Power Station; Recuperation Chimique d'Energie dans une Centrale Combinee MHD-Vapeur

    Energy Technology Data Exchange (ETDEWEB)

    Carrasse, J. [Societe Alsthom, Paris (France)

    1966-12-15

    -heating) of the conversion gases as main fuel in the MHD duct. (author) [French] Ce rapport etudie les aspects energetique et chimique de l'exploitation d'une centrale combinee MHD-vapeur utilisant en cycle ouvert les gaz de combustion d'un combustible fossile avec ensemencement au potassium. Un procede de recuperation d'energie par conversion chimique endothermique du combustible est presente. Dans une premiere partie, on rappelle succinctement quelles conditions thermiques et chimiques doit remplir la veine gazeuse le long de son parcours et l'on met en evidence la necessite absolue d'un recyclage d*energie aussi important que possible de l'aval vers l'amont du generateur MHD, aux depens de la centrale classique lui faisant suite. On mentionne ensuite les differents procedes envisages pour assurer les conditions thermiques de fonctionnement: rechauffage d'air, suroxygenation, etc. Une derniere partie de ce rapport, plus developpee, tenant compte des remarques precedentes, expose le principe et differents modes d'application possibles d'un procede en cours d'etude et d'experimentation. Dans ce procede une partie de l'energie calorifique des gaz issus de la tuyere MHD est recyclee vers l'amont sous forme chimique sur un support gazeux a temperature limitee. Pour cela, le combustible melange a des agents oxydants tels que la vapeur d'eau ou l'anhydride carbonique est converti vers 950 Degree-Sign C suivant un ensemble de reactions globalement endothermiques,- en un gaz constitue principalement par de l'oxyde de carbone, de l'hydrogene, de l'azote et un excedent de vapeur d'eau et d'anhydride carbonique. On evite ainsi l'utilisation d'echangeurs a tres haute temperature travaillant en presence de semences. Le rapport insiste sur la dessemination, facilitee et rendue possible ici en grande partie sous forme liquide (sels fondus) grace a un fonctionnement dans la gamme des temperatures ayoisinant 1000 Degree-Sign C. On examine le cas de l'utilisation apres traitement

  17. Thermochemical Conversion of Lignin for Fuels and Chemicals: A Review Conversion thermochimique de la lignine en carburants et produits chimiques : une revue

    Directory of Open Access Journals (Sweden)

    Joffres B.

    2013-10-01

    Full Text Available Lignin is one of the biomass components potentially usable as renewable resource to produce fuels or chemicals. After separation from the lignocellulosic matrix, this macromolecule is nowadays essentially valorized by combustion in paper mills. If second generation ethanol is produced in the future from lignocellulosic biomass, some increasing reserves of lignin will be available in addition to the ones coming from the paper industry. The main thermochemical ways such as pyrolysis, solvolysis, hydrothermal conversion and hydroconversion considered for the valorization of the lignin are reviewed in this article. La lignine est une des composantes de la biomasse lignocellulosique potentiellement valorisable comme ressource renouvelable pour la production de carburants ou de produits chimiques. Après séparation de la matrice lignocellulosique, cette macromolécule est de nos jours essentiellement utilisée comme combustible dans l’industrie papetière. Outre cette filière papetière, la production d’éthanol de seconde génération à partir de la cellulose aura comme conséquence la mise à disponibilité d’encore plus grandes quantités de lignine. De nouvelles applications pourront donc être proposées pour l’utilisation de cette bio-ressource. Les différentes voies thermochimiques : pyrolyse, solvolyse, conversion hydrothermale et hydroconversion envisagées pour la valorisation de la lignine sont décrites dans cet article.

  18. Compound odontoma

    Directory of Open Access Journals (Sweden)

    Monica Yadav

    2012-01-01

    Full Text Available Odontomas have been extensively reported in the dental literature, and the term refers to tumors of odontogenic origin. Though the exact etiology is still unknown, the postulated causes include: local trauma, infection, inheritance and genetic mutation. The majority of the lesions are asymptomatic; however, may be accompanied with pain and swelling as secondary complaints in some cases. Here, we report a case of a compound odontome in a 14 year old patient.

  19. La guerre et la médecine d'une culture de paix. 3- Synopsis des armes chimiques.

    OpenAIRE

    Pierard, Gérald

    2003-01-01

    A variety of chemical components can be used as warfare threats directly targeting humans. They can be classified according to their main biological effects as nerve agents, vesicants, lung damaging agents, cyanogen agents and incapacitants. Other chemical agents are water and food contaminants. Sill other less aggressive compounds are mainly used to control riots. Smokes, flame materials and herbicides belong to other classes of chemical agents of the warlike armamentum exhibiting a direct e...

  20. COMPOSITIONS CHIMIQUES, PROPRIETES ANTIMICROBIENNES ET ANTIOXYDANTES DES HUILES ESSENTIELLES DES RACINES DE TROIS PINACEAE D’ALGERIE

    OpenAIRE

    SELADJI, Dalila

    2014-01-01

    The composition of the essential oils isolated from the roots of Pinus halepensis, P. pinaster, and P. pinea grown in Algeria were investigated by GC and GC/MS. The oil of P. halepensis was found to be rich in monoterpenes hydrocarbons (93.2 %), with α-pinene (87.4 %) being the major component. The most abundant compounds in P. pinaster oil were α-pinene (22.0 %), β-pinene (27.1 %) and trans-p-caryophyllene (21.4 %), while the oil of P. pinea contained limonene (66.3%) as a maj...

  1. Magnesium compounds

    Science.gov (United States)

    Kramer, D.A.

    2007-01-01

    Seawater and natural brines accounted for about 52 percent of U.S. magnesium compounds production in 2006. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from sea-water by Premier Chemicals in Florida; from well brines in Michigan by Martin Marietta and Rohm and Haas; and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from brucite by Applied Chemical Magnesias in Texas, from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta and Rohm and Haas from their operations mentioned above. About 59 percent of the magnesium compounds consumed in the United States was used for refractories that are used mainly to line steelmaking furnaces. The remaining 41 percent was consumed in agricultural, chemical, construction, environmental and industrial applications.

  2. Aspects chimiques de la combustion du charbon pulvérisé. Première partie Chemical Aspects of the Combustion of Pulverized Coal. Part One

    Directory of Open Access Journals (Sweden)

    De Soete G. G.

    2006-11-01

    Full Text Available II n'est pas facile de parvenir à une vue complète des multiples phénomènes chimiques dont la flamme de charbon pulvérisé est le siège. La présente étude bibliographique s'efforce de donner plus qu'une juxtaposition des données de la littérature récente, en risquant une tentative de présentation cohérente des mécanismes chimiques clés qui s'affrontent dans cette combustion. Ces mécanismes font intervenir des réactions en phase gazeuse relativement rapides (combustion des produits gazeux de pyrolyse, formation d'oxydes d'azote à partir de l'azote organique ainsi qu'un certain nombre de réactions hétérogènes très importantes (dévolatilisation pyrolysante rapide, oxydation du coke, réduction hétérogène d'oxydes d'azote qui peuvent se dérouler de façon beaucoup plus lente. En ce qui concerne ces dernières, le régime non isotherme, auquel les soumet l'existence de gradients de température dans la flamme industrielle, entraîne souvent des conséquences non négligeables pour le déroulement de ces mécanismes cinétiques complexes : ainsi la quantité et la composition des produits de pyrolyse est fortement tributaire de ces conditions non isothermes. Carrefour de plusieurs mécanismes chimiques complexes, la flamme de charbon est caractérisée chimiquement par un grand nombre de cas de compétition : a compétition entre différentes voies réactionnelles à l'intérieur d'un mécanisme donné ; à titre d'exemple typique : la pyrolyse du charbon ; b compétition entre phénomènes chimiques et physiques, également à l'intérieur d'un même mécanisme, entraînant la transition éventuellement réversible d'un régime cinétique vers un régime diffusionnel, comme c'est le cas dans l'oxydation du coke, avec des conséquences sensibles pour la vitesse réactionnelle globale et sa dépendance par rapport à la température, pouvant même aller jusqu'à l'extinction de la combustion du coke ; c compétition entre

  3. Compound odontoma

    Directory of Open Access Journals (Sweden)

    José Marcelo Vargas Pinto

    2008-01-01

    Full Text Available Odontomas are the most common types of odontogenic tumors, as they are considered more as a developmental anomaly (hamartoma than as a true neoplasia. The aim of the present study is to describe a clinical case of compound odontoma, analyzing its most commonsigns, its region of location, the decade of life and patient’s gender, disorders that may occur as well as the treatment proposed. In order to attain this objective, the method was description of the present clinical case and bibliographic revision, arriving at the result that the treatment for this type of lesion invariably is surgical removal (enucleation and curettage and the prognosis is excellent. The surgical result was followed up in the post-operative period by radiographic exam, and it was possible to conclude that there was complete cicatrization and tissue repair.

  4. Magnesium compounds

    Science.gov (United States)

    Kramer, D.A.

    2012-01-01

    Seawater and natural brines accounted for about 57 percent of magnesium compounds produced in the United States in 2011. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties LLC from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia LLC in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash Wendover LLC and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma Inc. in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its brine operation in Michigan.

  5. The chemical industry of uranium in France; L'industrie chimique de l'uranium en France

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmidt, B [Commissariat a l' Energie Atomique, Paris (France). Centre d' Etudes Nucleaires

    1955-07-01

    The actual CEA program is concerned with the construction of two large graphite reactors, each of those containing at least one hundred tons of uranium metal with nuclear purity. The uranium for these two reactors will be regularly supplied by new resources discovered in France and Madagascar in the last five years. The working and treatment of such ore have led to the creation of an important french industry of which the general outline and principle are described. The operated ores have got different natures and concentration, individual characteristics are described for the main ores.The most high-grade ore are transported to a central plant in Bouchet near Paris; the low-grade ore are concentrated by physical methods or chemical processes of which principles and economy are studied with constancy. The acid processes are the only used until now, although the carbonated alkaline processes has been studied in France. The next following steps after the acid process until the obtention of uranium rich concentrate are described. The purification steps of uranium compounds to nuclear purity material are described as well as the steps to elaborate metal of which the purity grade will be specify. Finally, the economic aspects of uranium production difficulty will be considered in relation with technical progresses which we can expect to achieve in the future. (M.P.)

  6. Isotopically modified compounds

    International Nuclear Information System (INIS)

    Kuruc, J.

    2009-01-01

    In this chapter the nomenclature of isotopically modified compounds in Slovak language is described. This chapter consists of following parts: (1) Isotopically substituted compounds; (2) Specifically isotopically labelled compounds; (3) Selectively isotopically labelled compounds; (4) Non-selectively isotopically labelled compounds; (5) Isotopically deficient compounds.

  7. Study relating to the physico-chemical behaviour of heavy water in nuclear reactors; Etudes relatives au comportement physico-chimique de l'eau lourde dans les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Chenouard, J; Dirian, G; Roth, E; Vignet, P; Platzer, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1959-07-01

    Chemical and isotope pollution, and radiolytic decomposition are the two most important ways in which heavy water becomes degraded in nuclear reactors. Chemical pollution has led to the creation of ion exchange purification loops specially designed for reactors: the report contains a description in detail of the application of this purification method in CEA research reactors, including the analysis required, results obtained, and their interpretation. The intelligence obtained on radiolytic decomposition with the same facilities is also discussed, as well as the recombination apparatus and control equipment utilized. Finally, investigation to date in the CEA on recombination circuits for power reactors is also discussed. (author) [French] Parmi les degradations subies par l'eau lourde dans les reacteurs nucleaires, les deux plus importantes sont la pollution chimique et isotopique et la decomposition radiolytique. La pollution chimique a conduit a mettre au point pour le cas particulier des reacteurs, des circuits d'epuration par echange d'ions. On decrit ici en detail la mise en oeuvre de cette methode dans les reacteurs de recherche du CEA; les controles qu'elle necessite, les resultats obtenus et leur interpretation. En ce qui concerne la dissociation radiolytique de l'eau, les renseignements obtenus sur ces memes reacteurs sont communiques, ainsi que les details des dispositifs de recombinaison et des moyens de controle. Enfin, on fait le point des etudes poursuivies au CEA sur ces memes problemes de recombinaison dans le cas des reacteurs de puissance. (auteur)

  8. Chemical and electrochemical properties in the molten lithium chloride-potassium chloride eutectic; Proprietes chimiques et electrochimiques dans l'eutectique chlorure de lithium-chlorure de potassium fondu

    Energy Technology Data Exchange (ETDEWEB)

    Delarue, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1960-12-15

    We have studied the behaviour of several chemical species in the molten LiCI-KCI eutectic. The solubility of certain oxides and sulphides has made it possible for us to show the existence of O{sup 2-} and S{sup 2-} ions. We have been able to show the existence of a certain number of chemical reactions: oxido-reduction precipitation, complex formation; we have studied, amongst others, the oxidation of O{sup 2-} and of S{sup 2-}. (author) [French] Nous avons examine le comportement de quelques especes chimiques dans l'eutectique LiCl-KCl fondu. La solubilite de certains oxydes et sulfures nous a permis de montrer l'existence des particules O{sup 2-} et S{sup 2-}. Nous avons pu mettre en evidence un certain nombre de reactions chimiques: oxydoreduction, precipitation, formation de complexes; nous avons etudie, entre autres, l'oxydation de O{sup 2-} et de S{sup 2-}. La prevision de ces reactions peut etre faite d'une facon semi-quantitive a l'aide de diagrammes potentiel pO{sup 2-} et potentiel pS{sup 2-}. Les raisonnements que l'on fait dans les milieux aqueux sont applicables dans le cas des sels fondus. (auteur)

  9. Study relating to the physico-chemical behaviour of heavy water in nuclear reactors; Etudes relatives au comportement physico-chimique de l'eau lourde dans les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Chenouard, J.; Dirian, G.; Roth, E.; Vignet, P.; Platzer, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1959-07-01

    Chemical and isotope pollution, and radiolytic decomposition are the two most important ways in which heavy water becomes degraded in nuclear reactors. Chemical pollution has led to the creation of ion exchange purification loops specially designed for reactors: the report contains a description in detail of the application of this purification method in CEA research reactors, including the analysis required, results obtained, and their interpretation. The intelligence obtained on radiolytic decomposition with the same facilities is also discussed, as well as the recombination apparatus and control equipment utilized. Finally, investigation to date in the CEA on recombination circuits for power reactors is also discussed. (author) [French] Parmi les degradations subies par l'eau lourde dans les reacteurs nucleaires, les deux plus importantes sont la pollution chimique et isotopique et la decomposition radiolytique. La pollution chimique a conduit a mettre au point pour le cas particulier des reacteurs, des circuits d'epuration par echange d'ions. On decrit ici en detail la mise en oeuvre de cette methode dans les reacteurs de recherche du CEA; les controles qu'elle necessite, les resultats obtenus et leur interpretation. En ce qui concerne la dissociation radiolytique de l'eau, les renseignements obtenus sur ces memes reacteurs sont communiques, ainsi que les details des dispositifs de recombinaison et des moyens de controle. Enfin, on fait le point des etudes poursuivies au CEA sur ces memes problemes de recombinaison dans le cas des reacteurs de puissance. (auteur)

  10. Evaluation des caractéristiques physico-chimiques des miels commercialisés à Cotonou

    Directory of Open Access Journals (Sweden)

    Djossou, JA.

    2013-01-01

    Full Text Available Evaluation of Physiochemical Characteristic of the Honeys Marketed in Cotonou. Honey is the foodstuff produced by honeybees from the nectar or honeydew. In Benin, it is marketed and sold in pharmacies, supermarkets, small shops in some large cities, village markets and even at home. However, the conditions of harvesting, packaging and storage can influence its qualities. To verify the quality of honeys marketed in Cotonou, 36 samples were purchased in supermarkets and pharmacies. The physicochemical quality and polyphenolic nature of samples were determined. The results show that the pH varied from 3.57 to 5.17 with an acidity of between 21.80 and 62,32meq NaOH/ kg. They have high content of proline (169.27-1699.21 mg / kg and total sugar (81.96-90.06 g / 100 g with an HMF content of 22.51 to 41.96 mg / kg. They contained 9.84 to 19.76% moisture and 0.19 to 0.62% minerals. Considering all physicochemical parameters, almost half (41.67% of the samples presented at least one quality parameter exceeding the permitted limit of the 2001 Codex Alimentarius norm. There is a large variability between samples for total phenolic content (27.88-248.80 mg GAE/100 g and flavonoids (0.30 to 55.17 mg CAT/100 g. A significant correlation was observed between color and total phenolic content. Color and the total flavonoids were correlated too, as were also the polyphenolic compounds.

  11. Diagnosis of water pollution caused by chemical effluents using hydro biological methods; Diagnostic de la pollution des eaux par les effluents chimiques au moyen des methodes hydrobiologiques

    Energy Technology Data Exchange (ETDEWEB)

    Simeon, C; Bonnefoy-Claudet, J [Commissariat a l' Energie Atomique, Pierrelatte (France). Centre d' Etudes Nucleaires

    1965-04-01

    Industrial plants which discharge chemical effluents into rivers are faced with a double problem. 1 - To avoid excessive pollution which leads to an important modification of the medium and to a poisoning of the aquatic fauna, and in particular to the killing of fish. These disadvantages are avoided by a treatment of the effluents, by calculating the minimum fatal doses and the limiting dilutions for fish, and by carrying out biological analyses and tests on the residual waters. 2 - To avoid provoking continuous, slow and insidious pollutions which are more difficult to detect and which would result in the gradual sterilization of receptive media. In order to estimate this possible influence, the authors have listed the aquatic fauna and flora found in the canal which was the object of the experiment, and have modified the Saprobies system due to Kolwickz. They have tried to detect the presence or absence of pollution by estimating the density of the phyto-plankton formed on submerged laminae (periphyton) and the specific variations in the alga of which these populations are made up. In this report are given details of the tests and of the first results obtained. (authors) [French] Les usines deversant dans les cours d'eaux des effluents chimiques se trouvent devant un double probleme. 1 - Eviter les pollutions aigues qui se traduisent par une modification importante du milieu et par l'empoisonnement de la faune aquatique et notamment la mort du poisson. On evite ces inconvenients en traitant les effluents, en calculant les doses minima mortelles et les dilutions limites pour le poisson, en surveillant les eaux residuaires par analyses et tests biologiques. 2 - Ne pas provoquer des pollutions chroniques, lentes, insidieuses, plus difficiles a mettre en evidence qui aboutiraient a la sterilisation progressive des milieux recepteurs. Pour apprecier cette influence eventuelle les auteurs ont inventorie la faune et la flore aquatique du canal, objet de l'experience et

  12. Diagnosis of water pollution caused by chemical effluents using hydro biological methods; Diagnostic de la pollution des eaux par les effluents chimiques au moyen des methodes hydrobiologiques

    Energy Technology Data Exchange (ETDEWEB)

    Simeon, C.; Bonnefoy-Claudet, J. [Commissariat a l' Energie Atomique, Pierrelatte (France). Centre d' Etudes Nucleaires

    1965-04-01

    Industrial plants which discharge chemical effluents into rivers are faced with a double problem. 1 - To avoid excessive pollution which leads to an important modification of the medium and to a poisoning of the aquatic fauna, and in particular to the killing of fish. These disadvantages are avoided by a treatment of the effluents, by calculating the minimum fatal doses and the limiting dilutions for fish, and by carrying out biological analyses and tests on the residual waters. 2 - To avoid provoking continuous, slow and insidious pollutions which are more difficult to detect and which would result in the gradual sterilization of receptive media. In order to estimate this possible influence, the authors have listed the aquatic fauna and flora found in the canal which was the object of the experiment, and have modified the Saprobies system due to Kolwickz. They have tried to detect the presence or absence of pollution by estimating the density of the phyto-plankton formed on submerged laminae (periphyton) and the specific variations in the alga of which these populations are made up. In this report are given details of the tests and of the first results obtained. (authors) [French] Les usines deversant dans les cours d'eaux des effluents chimiques se trouvent devant un double probleme. 1 - Eviter les pollutions aigues qui se traduisent par une modification importante du milieu et par l'empoisonnement de la faune aquatique et notamment la mort du poisson. On evite ces inconvenients en traitant les effluents, en calculant les doses minima mortelles et les dilutions limites pour le poisson, en surveillant les eaux residuaires par analyses et tests biologiques. 2 - Ne pas provoquer des pollutions chroniques, lentes, insidieuses, plus difficiles a mettre en evidence qui aboutiraient a la sterilisation progressive des milieux recepteurs. Pour apprecier cette influence eventuelle les auteurs ont inventorie la faune et la flore aquatique du canal, objet de l

  13. Lubrifiants extrême-pression pour engrenages. Aspects chimiques de l'optimisation des performances mécaniques Extreme-Pressure Gear Lubricants: Chemical Aspects for Obtaining Optimum Mechanical Performances

    Directory of Open Access Journals (Sweden)

    Born M.

    2006-11-01

    Full Text Available Les conditions optimales de rendement des moteurs correspondent rarement aux besoins de l'utilisation finale de l'énergie en ce qui concerne la vitesse de rotation et le couple, d'où la nécessité de mécanismes intermédiaires qui réalisent l'adaptation nécessaire : réducteurs, boîtes de vitesse (manuelles ou automatiques, boîtes de transfert, ponts arrières. La technologie moderne, particulièrement dans les transports, exige la réduction des masses et des volumes alloués à ces mécanismes, ce qui correspond à des puissances spécifiques de plus en plus élevées, transitant par les engrenages. Malgré les progrès technologiques réalisés dans la conception et la réalisation des engrenages, leur lubrification correcte reste un facteur déterminant. La lubrification des engrenages chargés exige l'emploi de composés chimiques dits additifs extrême-pression . Parmi ceux-ci les combinaisons à base de phosphore et de soufre sont largement utilisées dans l'industrie et seront les seules considérées dans cet article. Le soufre est l'élément extrême-pression par excellence : il forme au niveau des microgrippages un film solide de sulfure de fer facilement cisaillable. Le soufre est apporté par des sulfures ou polysulfures organiques oléosolubles mais sa labilité doit être ajustée de façon à exercer un effet uniquement au niveau local, sans provoquer de corrosion. Une bonne connaissance des relations structure des polysulfures-propriétés mécaniques permet d'optimiser la structure des additifs industriels. L'action antiusure est généralement du ressort des composés phosphorés : dialkyldithiophosphates de zinc, dialkylphosphites, alkylphosphates, sels d'amines des alkylphosphates. En fonction des types d'engrenages et de leurs conditions d'utilisation, des composés sulfurés à soufre plus ou moins labile seront choisis. De même, la balance entre additifs sulfurés et phosphorés sera optimisée. L'utilisation de

  14. Rubber compounding and processing

    CSIR Research Space (South Africa)

    John, MJ

    2014-06-01

    Full Text Available This chapter presents an overview on the compounding and processing techniques of natural rubber compounds. The introductory portion deals with different types of rubbers and principles of rubber compounding. The primary and secondary fillers used...

  15. Chemical kinetics: on the heterogeneous catalysis processes leading to an exchange between two phases. Example: isotopic exchange reactions; Cinetique chimique: sur les processus de catalyse 'heterogene' conduisant a un echange entre deux phases. Exemple: reactions d'echange isotopique

    Energy Technology Data Exchange (ETDEWEB)

    Dirian, G; Grandcollot, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    For an exchange reaction between a gaseous and a liquid phase proceeding by 'heterogeneous' catalysis in the liquid phase, diffusion in the liquid and the chemical reaction are two simultaneous and indivisible processes. We have nevertheless been able to establish criteria making it possible to distinguish between a really homogeneous kinetic process and a pseudo-homogeneous one. (author) [French] Pour une reaction d'echange entre une phase gazeuse et une phase liquide procedant par catalyse 'heterogene' en phase liquide, la diffusion dans le liquide et la reaction chimique sont deux etapes simultanees et indissociables. Nous avons pu neanmoins etablir des criteres permettant de distinguer entre une cinetique homogene vraie et une cinetique pseudo-homogene. (auteur)

  16. La cassitérite zonée du gisement de Sokhret Allal (granite des Zaër ; Maroc central) : composition chimique et phases fluides associées

    OpenAIRE

    Giuliani, Gaston

    1987-01-01

    La composition chimique d'une cassitérite zonée provenant du gisement de tungstène-étain de Sokhret Allal (Maroc central) a été analysée par microsonde électronique. La zonation optique du minéral correspond à des variations en éléments mineurs tels Fe et Ti. Les inclusions fluides contemporaines du dépôt de la cassitérite sont primaires et constituées de fluides typiquement aqueux appartenant au système H2O-NaCl. La contribution de ces nouvelles données dans la métallogenèse W-Sn du Maroc ce...

  17. Evaluation de la réactivité chimique et de la montée en cohésion au jeune âge des matériaux bitumineux recyclés à froid

    OpenAIRE

    ODIE, L; NAUDAT, C; BROSSEAUD, Y; BEGHIN, A; PLACIN, F; ECKMANN, B; DELFOSSE, F

    2006-01-01

    Une des taches du programme de recherche européen SCORE était l'optimisation de la formulation des matériaux bitumineux recyclés à froid. Pour atteindre cet objectif, le LRPC de Saint-Brieuc a développé deux méthodes d'essais qui permettent de mieux appréhender la réactivité chimique entre les fraisats d'enrobé et les émulsions cationiques. La première méthode consiste en une extraction à l'eau acidifiée des fraisats d'enrobés. Le pH de la solution est mesuré tout au long de la procédure d'ex...

  18. Electrochemical study of chemical properties in ethanolamine and its mixtures with water; Etude electrochimique de proprietes chimiques dans l'ethanolamine et ses melanges avec l'eau

    Energy Technology Data Exchange (ETDEWEB)

    Grall, M [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-12-01

    This work is concerned with the study of acid-base reactions and of complex formation in ethanolamine and its mixtures with water. The ionic product of the solvent has been determined by an electro-chemical study of the H{sup +}/H{sub 2} system. The reduction curves for ethanolamine-water mixtures, for different acidities, have made it possible to follow the variations in the size of the pH domain as a function of the composition of the solvent. The form of this variation has been explained on the basis of the dielectric constant and the solvation of the proton by the ethanolamine. In the second part, the electrochemical systems of mercury have been studied by anodic polarography. In order to establish a parallel between the acid-base reactions and complex formation reactions, we have studied the stability of Hg (CN){sub 2} in water-ethanolamine mixtures. It has been possible to deduce the law for the variation of pK{sub c} with solvent composition. The representative graph of this function passes through a minimum for a proportion of about 50 per cent of ethanolamine as in the case of acids. This variation has been explained by the predominating influence of {epsilon} for ethanolamine propositions of over 50 per cent and by that of the solvation of Hg{sup 2+} for proportions of under 50 per cent. (author) [French] Ce travail porte sur l'etude des reactions acides-bases et de formation de complexes dans l'ethanolamine et ses melanges avec l'eau. Le produit ionique du solvant a pu etre determine par l'etude electro-chimique du systeme H{sup +}/H{sub 2}. Les courbes de reduction des melanges ethanolamine-eau, pour des acidites variables, ont permis de suivre les variations de l'etendue du domaine de pH, en fonction de la composition du solvant. L'allure de cette variation a ete expliquee en faisant intervenir la constante dielectrique et la solvatation du proton par l'ethanolamine. Dans une deuxieme partie, les systemes electrochimiques du mercure ont ete etudies par

  19. Chemical properties of some elements in a molten lithium chloride, potassium chloride eutectic (1962); Proprietes chimiques de quelques elements dans l'eutectique chlorure de lithium-chlorure de potassium fondu (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Molina, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-12-15

    of this type between two elements. We give the diagrams of uranium and sulphur as examples. The chemical properties of sulphur show that the dismutation phenomenon operates also in molten media reactions, thus emphasising the resemblance with aqueous solutions. Finally, we show briefly how it is possible to predict qualitatively the chemical properties of a given element in a molten solvent other than the LiCl-KCl eutectic. (author) [French] Le developpement de l'utilisation des milieux fondus notamment en chimie preparative et pour certaines applications technologiques, a pose le probleme de la connaissance des proprietes chimiques des elements dans ces solvants. Les etudes de structure des solutions fondues font etat de l'existence d'especes connues en solution aqueuse, telles que les ions et les complexes. Ce fait et d'autre part quelques travaux portant sur l'etude de reactions chimiques en milieu fondu, nous ont amene a etablir une comparaison entre ces milieux et les solutions aqueuses. Nous nous sommes proposes de montrer que l'on retrouve dans ces milieux les phenomenes fondamentaux de la chimie des solutions aqueuses, permettant de prevoir et d'interpreter les reactions. Les proprietes chimiques du vanadium, de l'uranium et du soufre dans l'eutectique LiCl-KCl fondu a 480 deg. C, nous ont servi d'exemple. Le premier probleme est l'identification des divers degres d'oxydation de ces elements existant dans le solvant choisi. Nous avons tente de le resoudre par la comparaison des spectres d'absorption obtenus en solution aqueuse et dans l'eutectique fondu. Nous discutons les possibilites de cette methode dans un chapitre consacre a la spectrophotometrie d'absorption dans l'eutectique LiCl-KCl. Au cours de l'etude des proprietes chimiques, nous insistons sur les moyens mis en oeuvre pour deplacer les equilibres: formation de complexes, variation des proprietes oxydo-reductrices avec la formation de complexes L'attention est plus particulierement portee sur les

  20. Sanskrit Compound Processor

    Science.gov (United States)

    Kumar, Anil; Mittal, Vipul; Kulkarni, Amba

    Sanskrit is very rich in compound formation. Typically a compound does not code the relation between its components explicitly. To understand the meaning of a compound, it is necessary to identify its components, discover the relations between them and finally generate a paraphrase of the compound. In this paper, we discuss the automatic segmentation and type identification of a compound using simple statistics that results from the manually annotated data.

  1. Chemical transformations associated with neutronic irradiation of telluric acid; Transformations chimiques associees a l'irradiation neutronique de l'acide teliurique

    Energy Technology Data Exchange (ETDEWEB)

    Bertet, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-01-15

    The chemical transformations which arise from irradiation of telluric acid with neutrons have been studied under several experimental conditions. The effects of the reaction (n, {gamma} ) on Te{sup VI} and of the isomeric transitions {sup 131m}Te{sup VI} {yields} {sup 131}Te and {sup 129m}Te{sup VI} {yields} {sup 129}Te, and the oxidation states of {sup 131}I formed by {beta} decay of {sup 131}Te have been investigated in detail. The Szilard-Chalmers effect has been put in evidence. Retention (R) depends on the isomeric state of Rd-Te and is higher for the metastable isotopes. R increases with the time of irradiation. R seems to be independent of the medium which is used for dissolving telluric acid irradiated in the solid state. Higher values of R are found if the acid is irradiated in neutral or alkaline solution; irradiation in acid solution leads to lower values for R. Retention for {sup 131}Te{sup VI} and {sup 129}Te{sup VI} formed by isomeric transition depends on the pH of the solution where this disintegration occurs. For instance, with {sup 129}Te, R is greater in 6 M NaOH (80 per cent) than in 3 M HCI (40 per cent). The relative amounts of the oxidation states of {sup 131}I (reduced fraction (I{sup -}, IO{sup -}, I{sub 2}), iodate and periodate) depend on the medium, both if the acid is irradiated in the solid state and it is irradiated in solution. In the first case, the reduced fraction increases from 12 to 89 per cent when the dissolving medium is changed from neutral to 0.8 M HNO{sub 3}. In the second case, the reduced fraction is 90 per cent in neutral or acid solution and 64 per cent in 0.5 M KOH. It has been shown, furthermore, that microamounts of Te{sup VI} are formed in certain cases. (author) [French] Les transformations chimiques accompagnant l'irradiation neutronique de l'acide tellurique ont ete etudiees dans differentes conditions experimentales. On a examine notamment les consequences de la reaction (n, {gamma}) sur Te{sup VI}, des

  2. rapid extraction of volatile compounds from citrus fruits using a ...

    African Journals Online (AJOL)

    M.A. Ferhat , M.N. Boukhatem, M. Hazzit 3, F.Chemat

    1 sept. 2016 ... que l'industrie chimique utilise des procédés utilisant les propriétés thermiques spécifiques ... moins de solvant, moins d'énergie et diminuant les rejets. ...... expression à froid à l'aide d'un appareil d'extraction semi industriel ...

  3. Simulations of a Circulating Fluidized Bed Chemical Looping Combustion System Utilizing Gaseous Fuel Simulation de la combustion en boucle chimique d’une charge gazeuse dans un lit fluidisé circulant

    Directory of Open Access Journals (Sweden)

    Mahalatkar K.

    2011-05-01

    Full Text Available Numerical studies using Computational Fluid Dynamics (CFD have been carried out for a complete circulating fluidized bed chemical looping combustor described in the literature (Abad et al., 2006 Fuel 85, 1174-1185. There have been extensive experimental studies in Chemical Looping Combustion (CLC, however CFD simulations of this concept are quite limited. The CLC experiments that were simulated used methane as fuel. A 2-D continuum model was used to describe both the gas and solid phases. Detailed sub-models to account for fluid-particle and particleparticle interaction forces were included. Global models of fuel and carrier chemistry were utilized. The results obtained from CFD were compared with experimental outlet species concentrations, solid circulation rates, solid mass distribution in the reactors, and leakage and dilution rates. The transient CFD simulations provided a reasonable match with the reported experimental data. Des études numériques de simulation des écoulements (CFD ont été réalisées sur un lit fluidisé circulant opérant en combustion par boucle chimique (CLC décrit dans la littérature (Abad et al., 2006 Fuel 85, 1174-1185. Si de nombreuses études expérimentales ont été conduites pour étudier le procédé CLC, les études concernant la simulation des écoulements par CFD de ce concept sont très limitées. Le système de combustion en boucle chimique simulé dans cette étude concerne la combustion d’une charge gazeuse (méthane. Un modèle 2-D à deux phases continues a été utilisé pour décrire les phases gaz et solide avec des sous-modèles détaillés pour décrire les forces d’interactions entre fluideparticule et particule-particule. Des modèles cinétiques globaux ont été intégrés pour décrire les réactions de combustion et de transformation du matériau transporteur d’oxygène. Les résultats obtenus par CFD ont été comparés aux concentrations expérimentales mesurées des diff

  4. Caractérisation physico-chimique de boues d’unité de production d’eau potable Physico-chemical characterization of sludge from a unit water drinking production

    Directory of Open Access Journals (Sweden)

    Mostahsine S.

    2012-09-01

    Full Text Available La composition chimique des boues hydroxydes, sous-produit de la potabilisation de l’eau est constituée majoritairement d’hydroxydes d’aluminium et de silice, les hydroxydes de Fer, de calcium, de potassium et de magnésium dont le taux peut varier sensiblement selon les périodes de prélèvement des eaux brutes et peut conférer à la boue des propriétés physico-chimiques intéressantes. La composition minéralogique des boues peut également comporter un solidifiant tel que les silicates de calcium. L’observation au MEB de ces boues hydroxydes montre une phase amorphe sous forme de flocons dont la géométrie est mal définie et emprisonnant de petits cristaux de quartz et de muscovite. Ces observations sont en corrélation avec les principales phases minérales mises en évidence dans les essais de diffraction des rayons X. L’étude du comportement thermique des boues, notamment celui de la déshydroxylation et les transformations de phases sont situées dans un intervalle de température compris entre 300 et 800°C. Ces transformations thermiques sont caractérisées par plusieurs méthodes analytiques (DSC, DRX et infrarouge. Les nouvelles phases cristallisées sont sous différentes formes de solutions solides du type (Ca, Al, Si, Fe, K, Mg. Chemical composition of the Hydroxides sludge, by-product of treatment of drinking water, are composed mainly of silica and the hydroxides of aluminium, the ratio of the hydroxides of iron, calcium, potassium and magnesium fluctuate appreciably according to the periods of taking away raw waters, and could confer to the sludge interesting physico-chemical properties. The mineralogical composition of the sludge may also contain a solidifying component such as calcium silicate. The MEB observation shows an amorphous phase in the form of flakes whose geometry is badly defined and imprisoning small muscovite and quartz crystals. These observations are in correlation with principal mineral

  5. Physical and chemical study of the influence of oxidation on the structure of carbon black; Etude physico-chimique de l'influence de l'oxydation sur la structure du noir de carbone

    Energy Technology Data Exchange (ETDEWEB)

    Hueber, Francois

    1961-06-26

    This research thesis reports the study of the influence of an oxidising attack on carbon black particles by using chemical, physical and electrochemical methods to highlight the oxidation process. The carbon black particle is a spherical set essentially made of amorphous and crystalline carbon. It appears that the oxidising attack mainly occurs against the amorphous parts which surround the crystallites. If the attack is strong enough, crystallites are freed and the particle collapses. This process has been observed by using electronic microscopy, X rays, the BET nitrogen absorption method, and infra-reds. Chemical analysis revealed the presence of carboxyl, hydroxyl and quinone functional groups on the oxidised particle surface. These groups have been dosed by different methods (methylation, calcium acetate dosing, polarography and potassium borohydride reduction) [French] Dans la presente etude nous nous sommes occupes de l'influence de l'attaque oxydante sur les particules de noir de carbone. Pour ce faire, nous avons mis en oeuvre des methodes chimiques, physiques et electrochimiques et nous avons ainsi pu mettre en evidence le processus de l'attaque oxydante. La particule de noir de carbone est un ensemble spherique constitue essentiellement de carbone engage dans des domaines amorphes et dans des domaines cristallins. L'attaque oxydante se fait surtout aux depens des parties amorphes qui entourent les cristallites. Si l'attaque est suffisamment poussee, les cristallites sont liberes ce qui se traduit par l'effondrement de la particule. C'est la conjugaison de la microscopie electronique, des rayons X, de la methode d'absorption d'azote B.E.T. et des infra-rouge qui ont permis d'etablir ce schema de l'attaque oxydante. Sur le plan des analyses chimiques, nous avons confirme la presence de fonctions carboxyles, hydroxyles et quinones a la surface de la particule de noir de carbone oxyde et avons pu les doser. Une des methodes de dosage quantitative des

  6. Evaluation des méthodes chimiques, spectroscopiques et chromatographiques utilisables pour l'identification des polluants pétroliers en mer Evaluation of Chemical, Spectroscopic and Chromatographic Methods Used to Identify Offshore Oil Pollutants

    Directory of Open Access Journals (Sweden)

    Albaigés J.

    2006-11-01

    Full Text Available Dans cet article on passe en revue les différentes méthodes utilisables pour l'identification des principaux polluants pétroliers de la mer par l'analyse quantitativé de leurs « marqueurs passifs x (soufre, azote, nickel, vanadium, paraffine et asphaltènes et la détermination d'autres caractéristiques intrinsèques. II s'agit de méthodes chimiques, spectroscop iques (infrarouge, ultraviolette et chromatographiques (chromatographie en phase gazeuse à haute résolution avec détection par ionisation de flamme, photométrie de flamme et capture d'électrons. Les mesures ont concerné une grande variété de produits susceptibles de polluer la côte méditerranéenne espagnole - pétrole brut des gisements offshore d'Amposta et de Castellôn; - pétroles bruts importés traités dans les raffineries côtières (Boscan, Es Sider, Kuwait, Arabian light, etc.; - fractions lourdes provenant de ces raffineries (fuel-cils, asphaltes, lubrifiants; - polluants réels; - échantillons altérés artificiellement en laboratoire afin de mettre en évidence l'action progressive des éléments naturels. On a trouvé que les méthodes les plus intéressantes étaient : - le dosage chimique du soufre, du nickel et du vanadium; - la spectroscopie infrarouge; - la chromatographie en phase gazeuse à haute résolution avec détection par ionisation et photométrie de flamme. This article reviews the different methods that con be used to identify the leading petroleum pollutants of the sea by quantitative analysis of their a passive markers » (sulfur, nitrogen, nickel, vanadium, paraffin, asphaltenes and by determining other intrinsic properties. These methods are chemical, spectroscopic (infrared, ultraviolet and chromatographic (high-resolution gas chromatography with flame ionization detection, flame photometry and electron capture. Measurements were made of a great variety of products capable of polluting the Spanish Mediterranean coast, including

  7. Chemical Production using Fission Fragments; Emploi des fragments de fission dans la production de substances chimiques; Ispol'zovanie produkto v raspada v khimicheskom proizvodstve; Empleo de los fragmentos de fision en la industria quimica

    Energy Technology Data Exchange (ETDEWEB)

    Dawson, J K; Moseley, F [AERE, Harwell (United Kingdom)

    1960-07-15

    Some reactor design considerations of the use of fission recoil fragment energy for the production of chemicals of industrial importance have been discussed previously in a paper given at the Second United Nations International Conference on the Peaceful Uses of Atomic Energy [A/Conf. 15/P.76]. The present paper summarizes more recent progress made on this topic at AERE, Harwell. The range-energy relationship for fission fragments is discussed in the context of the choice of fuel system for a chemical production reactor, and the experimental observation of a variation of chemical effect along the length of a fission fragment track is described for the irradiation of nitrogen-oxygen mixtures. Recent results are given on the effect of fission fragments on carbon monoxide-hydrogen gas mixtures and on water vapour. No system investigated to date shows any outstanding promise for large-scale chemical production. (author) [French] En ce qui concerne la construction de reacteurs, certaines considerations relatives a l'emploi de l'energie des fragments de fission de recul pour la production de certaines substances chimiques d'importance industrielle ont deja ete examinees dans un memoire soumis a la deuxieme Conference internationale sur l'utilisation de l'energie atomique a des fins pacifiques [A/Conf. 15/PP. 76]. Le present memoire donne un apercu des progres accomplis depuis lors dans ce domaine par 1'Atomic Energy Research Establishment a Harwell. Les auteurs etudient la relation entre le parcours et l'energie pour des fragments de fission a propos du choix du combustible pour un reacteur destine a la production de substances chimiques; ils decrivent aussi une variation d'effet chimique observee le long de la trajectoire d'un fragment de fission pendant l'irradiation de melanges azote-oxygene. Les auteurs fournissent les resultats de recherches recentes relatives a l'effet des fragments de fission sur des melanges oxyde de carbone-hydrogen e et sur la vapeur d

  8. Contribution to the study of several chemical hazards in the Centre d'Etudes Nucleaires of Fontenay-aux-Roses; Contribution a l'etude de quelques nuisances chimiques au centre d'etudes nucleaires de Fontenay-aux-Roses

    Energy Technology Data Exchange (ETDEWEB)

    Megemont, C; Grau, C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-10-01

    From the checking of 2750 index cards of hazards, the study relates the distribution of the chemical hazards in the Centre d'Etudes Nucleaires of Fontenay-aux-Roses. Those concerning the greatest number of agents in the Centre are classified according to the categories corresponding to the different conditions of working. Thus, the most important are put forward. Then, the authors rapidly make a review of hazards which may have some special interest because they appear more specific of the nuclear energy or because they are the most frequently noted on the index cards of hazards. The case of the tributylphosphate is studied more precisely. (authors) [French] A partir de l'examen de 2750 fiches de nuisances, l'etude porte sur la repartition des nuisances chimiques au Centre d'Etudes Nucleaires de Fontenay-aux-Roses. Celles qui concernent le plus grand nombre d'agents du Centre sont classees selon les categories correspondant aux differentes conditions de travail. Les plus importantes d'entre elles sont ainsi mises en evidence. | Les auteurs passent ensuite en revue, rapidement, les nuisances qui peuvent presenter un interet particulier soit parce qu'elles semblent plus specifiques de l'Energie Nucleaire, soit parce qu'on les rencontre le plus frequemment sur les fiches de nuisances. Le cas du tributylphosphate est envisage de facon plus detaillee. (auteurs)

  9. Stable isotopes labelled compounds

    International Nuclear Information System (INIS)

    1982-09-01

    The catalogue on stable isotopes labelled compounds offers deuterium, nitrogen-15, and multiply labelled compounds. It includes: (1) conditions of sale and delivery, (2) the application of stable isotopes, (3) technical information, (4) product specifications, and (5) the complete delivery programme

  10. Compounding around the world.

    Science.gov (United States)

    Vail, Jane

    2008-01-01

    Pharmaceutical compounding is universal in its prevalence. Variations in disease patterns, culture, and tradition; the role of government in health care; and the availability of essential equipment and required agents shape a compounding profile unique to each country worldwide. In the following reflections, pharmacists form Argentina, Belgium, Colombia, Germany, Puerto Rico, Spain, and the United States describe their experiences in the compounding setting unique to their practice and their nation. The unifying theme in their comments is the dedication of each contributor to enabling recovery and ensuring the good health of his or her clients.

  11. Modelisation mathematique et numerique d'un capteur stockeur d ...

    African Journals Online (AJOL)

    LJ.o ufo. .,.i.(u-a.,...ll c;..c. ~ ..l,!1ji:i. 4.1..it.....!1 I~. ":~ .!.i:.....ill 11\\ . _j •• ~.11. • L)I :i -_,11 • --11 . • • . • 4.IY.l.I ..... ~!/ . __ 11;.,... ·~1 ..:..l.i.i.bl1 Ul:io....l ..l - __ 11. l.s- J-' .

  12. Computational Fluid Dynamics Applied to Chemical Reaction Engineering La mécanique des fluides numérique appliquée au génie des réactions chimiques

    Directory of Open Access Journals (Sweden)

    Trambouze P.

    2006-11-01

    , but we can never be sure that the numerical results given by any of these software packages are applicable to a practical industrial case, without checking these results in one way or another. There is quite general agreement on the necessity of obtaining experimental data concerning problem examples, in order to check and compare the computation results of the various software packages proposed for dealing with these specific problems. On the experimental side, there are a great deal of measurement methods able to give local values of temperature, pressure, velocities, concentrations of chemical species, phases ratio, size of bubbles, drops or particles, as well as to produce an overall visualization of flows. We have mentioned the difficulties linked to the mathematical treatment of the equations written for simulating reactive flows. As usually done in CFD, for most problems encountered, a first useful solution can be obtained by limitingthe modelto oneortwospace dimensions (1D or 2D. However, very often it will be necessary not only to solve the 3D simulation set of equations, but also to achieve the unstationary solution of the same equations in order to really represent the true behaviour of the physical system. This last objective means much more complicated research, especially from the mathematical point of view. La mécanique des fluides numérique, ou CFD (Computational Fluid Dynamics et ses applications se sont développées très rapidement au cours des dix dernières années. Cette branche hybride de la mécanique et des mathématiques, à croissance rapide, doit certainement être considérée comme un outil potentiel efficace et très utile dans le domaine du génie chimique, et tout spécialement du génie des réactions chimiques ou CRE (Chemical Reaction Engineering. Les difficultés inhérentes à cette nouvelle approche découlent de la complexité des mécanismes qu'il faut simuler de manière simultanée : dynamique des fluides, r

  13. Compound Semiconductor Radiation Detectors

    CERN Document Server

    Owens, Alan

    2012-01-01

    Although elemental semiconductors such as silicon and germanium are standard for energy dispersive spectroscopy in the laboratory, their use for an increasing range of applications is becoming marginalized by their physical limitations, namely the need for ancillary cooling, their modest stopping powers, and radiation intolerance. Compound semiconductors, on the other hand, encompass such a wide range of physical and electronic properties that they have become viable competitors in a number of applications. Compound Semiconductor Radiation Detectors is a consolidated source of information on all aspects of the use of compound semiconductors for radiation detection and measurement. Serious Competitors to Germanium and Silicon Radiation Detectors Wide-gap compound semiconductors offer the ability to operate in a range of hostile thermal and radiation environments while still maintaining sub-keV spectral resolution at X-ray wavelengths. Narrow-gap materials offer the potential of exceeding the spectral resolutio...

  14. Hexavalent Chromium Compounds

    Science.gov (United States)

    Learn about chromium, exposure to which can increase your risk of lung cancer and cancer of the paranasal sinuses and nasal cavity. Hexavalent chromium compounds have been used as corrosion inhibitors in a wide variety of products and processes.

  15. MEA 86 Compound data

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data file contains the full raw parameter data for the 86 compounds tested in the developmental MEA assay, as well as Area Under the Curve (AUC) calculations...

  16. Unlock your Compound Management

    OpenAIRE

    Steffen Eller

    2016-01-01

    Pharmaceutical industry faces the increased demand for innovative medicines against various diseases. In this regard, the compound library in pharmaceutical industry is the most valuable asset. However, the compound distribution from the library into the screening plates is often still done manually and binds highly qualified resources to very time-consuming, tedious and error-prone tasks. To overcome these challenges, Chemspeed launched the first automated true one-to-one gravimetric "pi...

  17. Phenolic Molding Compounds

    Science.gov (United States)

    Koizumi, Koji; Charles, Ted; de Keyser, Hendrik

    Phenolic Molding Compounds continue to exhibit well balanced properties such as heat resistance, chemical resistance, dimensional stability, and creep resistance. They are widely applied in electrical, appliance, small engine, commutator, and automotive applications. As the focus of the automotive industry is weight reduction for greater fuel efficiency, phenolic molding compounds become appealing alternatives to metals. Current market volumes and trends, formulation components and its impact on properties, and a review of common manufacturing methods are presented. Molding processes as well as unique advanced techniques such as high temperature molding, live sprue, and injection/compression technique provide additional benefits in improving the performance characterisitics of phenolic molding compounds. Of special interest are descriptions of some of the latest innovations in automotive components, such as the phenolic intake manifold and valve block for dual clutch transmissions. The chapter also characterizes the most recent developments in new materials, including long glass phenolic molding compounds and carbon fiber reinforced phenolic molding compounds exhibiting a 10-20-fold increase in Charpy impact strength when compared to short fiber filled materials. The role of fatigue testing and fatigue fracture behavior presents some insight into long-term reliability and durability of glass-filled phenolic molding compounds. A section on new technology outlines the important factors to consider in modeling phenolic parts by finite element analysis and flow simulation.

  18. Oxidation and Reduction of Iron-Titanium Oxides in Chemical Looping Combustion: A Phase-Chemical Description Oxydation et réduction des minerais de fer-titane dans la combustion en boucle chimique

    Directory of Open Access Journals (Sweden)

    den Hoed P.

    2011-05-01

    Full Text Available Ilmenite (FeTiO3 is being explored as an oxygen carrier in chemical looping processes. Its reduction and oxidation are described by the system Fe-Fe2O3-TiO2-Ti2O3. The phase diagram at 1 000°C, presented here, offers a useful tool for predicting reactions and their products. We see that Fe2TiO5 (pseudobrookite and TiO2 (rutile form a stable phase assemblage following the oxidation of FeTiO3 (ilmenite in air. The subsequent reduction of Fe2TiO5 at oxygen partial pressures of 10-15.5atm stabilizes Fe1.02Ti0.98O3, a solid solution of ilmenite. Further reduction will produce metallic iron, which compromises the integrity of the oxygen carrier for chemical looping processes. We speculate that the reduction of Fe-Ti oxides in several practical instances does not reach completion (and equilibrium under the imposed atmospheres operating in fuel reactors. L’ilménite (FeTiO3 est considéré comme un transporteur d’oxygène potentiel pour les procédés en boucle chimique. Ses mécanismes de réduction et d’oxydation sont décrits à travers le système Fe-Fe2O3-TiO2-TiO3. Le diagramme de phase à 1 000°C, présenté ici, est un outil utile pour prédire les réactions et les produits. Nous constatons que Fe2TiO5 (pseudobrookite et TiO2 (rutile forment un assemblage de phase stable après oxydation de l’ilménite (FeTiO3 dans l’air. La réduction subséquente de Fe2TiO5 à la pression partielle de 10−15,5atm stabilise vers Fe1.02Ti0.98O3, une solution solide d’ilménite. Une réduction plus poussée va produire du fer métallique et compromettre l’intégrité du transporteur d’oxygène dans la boucle chimique. Il est probable que la réduction des oxydes Fe-Ti ne soit pas, en pratique, complète et n’atteigne pas l’équilibre dans les conditions rencontrées en opération dans les réacteurs de réduction.

  19. Chemical Looping Combustion of Solid Fuels in a 10 kWth Unit Combustion de charge solide en boucle chimique dans une unité de 10 kWth

    Directory of Open Access Journals (Sweden)

    Berguerand N.

    2011-02-01

    Full Text Available The present study is based on previous results from batch experiments which were conducted in a 10 kWth chemical looping combustor for solid fuels using ilmenite, an iron titanium oxide, as the oxygen carrier with two solid fuels: a Mexican petroleum coke and a South African bituminous coal. These experiments involved testing at different fuel reactor temperatures, up to 1030°C, and different particle circulation rates between the air and fuel reactors. Previous results enabled modeling of the reactor system. In particular, it was possible to derive a correlation between measured operational data and actual circulation mass flow, as well as a model that describes the carbon capture efficiency as a function of the residence time and the char reactivity. Moreover, the kinetics of char conversion could be modeled and results showed good agreement with experimental values. The purpose of the present study was to complete these results by developing a model to predict the conversion of syngas with ilmenite in the fuel reactor. Here, kinetic data from investigations of ilmenite in TGA and batch fluidized bed reactors were used. Results were compared with the actual conversions during operation in this 10 kWth unit. Cette étude est basée sur des résultats antérieurs obtenus dans une unité de combustion de charges solides en boucle chimique d’une puissance de 10 kWth. Le transporteur d’oxygène utilisé est de l’ilménite, un minerai de fer et de titane, et les charges solides étudiées sont, d’une part, un coke de pétrole mexicain et, d’autre part, un charbon bitumineux sud africain. Les résultats expérimentaux ont été obtenus à des températures allant jusqu’à 1030°C avec différents débits de transporteur d’oxygène entre les réacteurs d’oxydation et de réduction. La modélisation de la combustion en boucle chimique de charges solides a déjà permis d’établir une corrélation entre le débit de circulation de

  20. Formulation of new oxydizing microemulsions for the chemical decontamination of war toxic agents. Activity report. Formulation de nouvelles microemulsions oxydantes pour la decontamination chimique de toxiques de guerre

    Energy Technology Data Exchange (ETDEWEB)

    Eychenne, P.; Rico, I.; Perez, E.

    1994-01-01

    A series of reactions--hydrolysis of para-nitrophenyl diphenyl phosphate (PNDP) and oxydation of sulfurous compounds (tetrahydrothophene and semi-mustard gas)--enabled the authors to simulate the degradation of two particularly harmful war toxic agents: paraoxon and mustard gas. The best decontaminating formulations obtained were the following: (1) Paraoxon degradation: PNDP, 2.51 times 10 to the minus fourth power M; cetyl pyridinium chloride (CPCI), .008 M; K2CO3, .474 M; glycerol/water = 1.7; t(sub 1/2) = 48 sec. (2) Mustard-gas degradation: tetrahydrothiophene oxidation: tetrahydrothiophene, 0,14 M; CPCI, .008 M; magnesium monoperoxyphthalate (MMPP), .075 M; glycerol/water = 1.7; t(sub 1/2) = 102 sec; efficiency = 71%; sulfoxide = 69% sulfone = 31%. -- semi-mustard gas oxydation: semi-mustard gas, .07 M; CPCI, .008 M; MMPP, .075 M; glycerol/water = 1.7; 100% efficiency in 3 minutes.

  1. Investigations of the chemical states of carrier-free phosphorus-32 as extracted into water from pile-irradiated sulphur; Recherches sur les etats chimiques du phosphore-32 sans entraineur obtenu par extraction aqueuse a partir de soufre irradie dans un reacteur; Issledovanie khimicheskogo sostoyaniya svobodnogo ot nositelya fosfora-32 pri izvlechenii ego v vodu iz obluchennoj v yadernom reaktore sery; Estudio de los estados quimicos del fosforo-32 libre de portador que se obtiene por extraccion acuosa del azufre irradiado en un reactor

    Energy Technology Data Exchange (ETDEWEB)

    Dahl, J B; Birkelund, O R [Institutt for Atomenergi, Kjeller, Lillestrom (Norway)

    1962-01-15

    One of the methods of producing carrier free phosphorus-32 today is by extraction into water from pile-irradiated sulphur. The present work gives information concerning the chemical states of P{sup 32} in aqueous solutions at different steps of the routine production-process. The variation in the chemical state of P{sup 32} compounds in the final product has also been examined as a function of storage time. P{sup 32} bound as orthophosphate was found to be the main component. During the chemical processing, the amount of orthophosphate increased from about 70% at the beginning of the extraction to about 98 % in the final carrier-free P{sup 32} product. The residual amount consisted of a mixture of pyro-, tri-, tetra-, and other long-chain polyphosphates (number of P {>=} 5). No metaphosphates (ring-formed) were found in the solutions during production and storage. The results indicate that the polyphosphorus compounds were formed in the target material during irradiation. Special attention was paid to the adsorption of carrier-free P{sup 32} compounds to glassware under the existing experimental conditions. (author) [French] L'une des methodes employee a l'heure actuelle pour obtenir du phosphore-32 sans entraineur consiste a l'extraire dans l'eau a partir de soufre irradie dans un reacteur. Les auteurs donnent des indications sur l'etat chimique du phosphore-32 dans des solutions aqueuses, a differentes etapes du processus de preparation courant. Us examinent aussi les changements de l'etat chimique des composes du phosphore-32 dans le produit final en fonction de la duree de stockage. On a constate que le {sup 32}P combine sous forme d'orthophosphate etait le principal composant. Au cours du traitement chimique, la teneur en orthophosphate est passee d'environ 70% au debut de l'extraction a environ 98% lors de l'obtention du produit final sans entraineur. Le reste etait constitue d'un melange de pyro-, tri-, tetra- et autres polyphosphates a chaine longue (P

  2. Fluorine-18 labelled compounds

    International Nuclear Information System (INIS)

    Kleijn, J.P. de

    1978-01-01

    The work presented in this thesis deals with the problems involved in the adaption of reactor-produced fluorine-18 to the synthesis of 18 F-labelled organic fluorine compounds. Several 18 F-labelling reagents were prepared and successfully applied. The limitations to the synthetic possibilities of reactor-produced fluoride- 18 become manifest in the last part of the thesis. An application to the synthesis of labelled aliphatic fluoro amino acids has appeared to be unsuccessful as yet, although some other synthetic approaches can be indicated. Seven journal articles (for which see the availability note) are used to compose the four chapters and three appendices. The connecting text gives a survey of known 18 F-compounds and methods for preparing such compounds. (Auth.)

  3. Chloric organic compound

    International Nuclear Information System (INIS)

    Moalem, F.

    2000-01-01

    Since many years ago, hazardous and toxic refuses which are results of human activities has been carelessly without any Biological and Engineering facts and knowledge discharged into our land and water. The effects of discharging those materials in environment are different. Some of refuse materials shows short and other has long-time adverse effects in our environment, Among hazardous organic chemical materials, chlorine, consider, to be the main element. Organic materials with chlorine is called chlorine hydrocarbon as a hazardous compound. This paper discuss the hazardous materials especially chloric organic compound and their misuse effects in environment and human being

  4. Medicinal gold compounds

    International Nuclear Information System (INIS)

    Parish, R.V.; Cottrill, S.M.

    1987-01-01

    A major use of gold compounds in the pharmaceutical industry is for anti-arthritic agents. The disease itself is not understood and little is known about the way in which the drugs act, but detailed pictures of the distribution of gold in the body are available, and some of the relevant biochemistry is beginning to emerge. The purpose of this article is to give a survey of the types of compounds presently employed in medicine, of the distribution of gold in the body which results from their use, and of some relevant chemistry. Emphasis is placed on results obtained in the last few years

  5. Compound semiconductor device physics

    CERN Document Server

    Tiwari, Sandip

    2013-01-01

    This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those inter

  6. Prediction of intermetallic compounds

    International Nuclear Information System (INIS)

    Burkhanov, Gennady S; Kiselyova, N N

    2009-01-01

    The problems of predicting not yet synthesized intermetallic compounds are discussed. It is noted that the use of classical physicochemical analysis in the study of multicomponent metallic systems is faced with the complexity of presenting multidimensional phase diagrams. One way of predicting new intermetallics with specified properties is the use of modern processing technology with application of teaching of image recognition by the computer. The algorithms used most often in these methods are briefly considered and the efficiency of their use for predicting new compounds is demonstrated.

  7. Spent solid catalysts of chemical industry and petroleum refining; Les catalyseurs solides uses de l`industrie chimique et du raffinage petrolier

    Energy Technology Data Exchange (ETDEWEB)

    Paillier, A; Briand, Y

    1997-12-31

    The aim of this work is the analysis of the heterogeneous catalysis. In a first part are given the utilizing sectors. There are mainly the petroleum refining, the chemical industry and the environment. A catalyst is chosen according to its selectivity and velocity, its cost and the wastes it induces. Thus are found three main heterogeneous catalysts series: the bulky metals, the supported metals: precious or heavy or their compounds, the zeolites and other silico-aluminates. Their most frequent uses are given. The catalysts used in the main petroleum refining processes (distillation, catalytic hydro-treatment, desulfurization, catalytic reforming, catalytic cracking, catalytic hydrocracking, alkylation) are also detailed. The second part deals with the spent solid catalysts. The reasons of the deactivation (poisons or contaminants, structure modification) are given. The spent catalysts are either regenerated or eliminated. The regeneration methods are described. The solid catalysts cannot be stored without being stabilized (decrease of its water permeability and of its leachable fraction). The stabilization methods are reviewed. The regulations on the spent solid catalysts are given in the last part. (O.M.)

  8. Spent solid catalysts of chemical industry and petroleum refining; Les catalyseurs solides uses de l`industrie chimique et du raffinage petrolier

    Energy Technology Data Exchange (ETDEWEB)

    Paillier, A.; Briand, Y.

    1996-12-31

    The aim of this work is the analysis of the heterogeneous catalysis. In a first part are given the utilizing sectors. There are mainly the petroleum refining, the chemical industry and the environment. A catalyst is chosen according to its selectivity and velocity, its cost and the wastes it induces. Thus are found three main heterogeneous catalysts series: the bulky metals, the supported metals: precious or heavy or their compounds, the zeolites and other silico-aluminates. Their most frequent uses are given. The catalysts used in the main petroleum refining processes (distillation, catalytic hydro-treatment, desulfurization, catalytic reforming, catalytic cracking, catalytic hydrocracking, alkylation) are also detailed. The second part deals with the spent solid catalysts. The reasons of the deactivation (poisons or contaminants, structure modification) are given. The spent catalysts are either regenerated or eliminated. The regeneration methods are described. The solid catalysts cannot be stored without being stabilized (decrease of its water permeability and of its leachable fraction). The stabilization methods are reviewed. The regulations on the spent solid catalysts are given in the last part. (O.M.)

  9. Compound floating pivot micromechanisms

    Science.gov (United States)

    Garcia, Ernest J.

    2001-04-24

    A new class of tilting micromechanical mechanisms have been developed. These new mechanisms use compound floating pivot structures to attain far greater tilt angles than are practical using other micromechanical techniques. The new mechanisms are also capable of bi-directional tilt about multiple axes.

  10. The Onium Compounds

    Science.gov (United States)

    Tsarevsky, Nicolay V.; Slaveykova, Vera; Manev, Stefan; Lazarov, Dobri

    1997-06-01

    The onium salts are of a big interest for theoretical and structural chemistry, and for organic synthesis. Some representatives of the group (e.g. ammonium salts) were known from the oldest times. Many onium salts are met the nature: ammonium salts (either as inorganic salts, and organic derivatives, e.g. aminoacids, salts of biogenic amines and alkaloids, etc.); oxonium salts (plant pigments as anthocyans are organic oxonium compounds), etc. In 1894 C. Hartmann and V. Meyer prepared the first iodonium salts - 4-iododiphenyliodonium hydrogensulfate and diphenyliodonium salts, and suggested the ending -onium for all compounds with properties similar to those of ammonium salts. Nowadays onium compounds of almost all nonmetals are synthesised and studied. A great variety of physical methods: diffraction (e.g. XRD) and spectral methods (IR-, NMR-, and UV-spectra), as well as the chemical properties and methods of preparation of onium salts have been used in determination of the structure of these compounds. The application of different onium salts is immense. Ammonium, phosphonium and sulfonium salts are used as phase-transfer catalysts; diazonium salts - for the preparation of dyes, metalochromic and pH-indicators. All the onium salts and especially diazonium and iodonium salts are very useful reagents in organic synthesis.

  11. Forecasting of superconducting compounds

    International Nuclear Information System (INIS)

    Savitskii, E.M.; Gribulya, V.G.; Kiseleva, N.N.

    1981-01-01

    In forecasting new superconducting intermetallic compounds of the A15 and Mo 3 Se types most promising from the viewpoint of high critical temperature Tsub(c), high critical magnetic fields Hsub(c), and high critical currents and in estimating their transition temperature it is proposed to apply cybernetic methods of computer learning

  12. NATURAL POLYACETYLENE COMPOUNDS

    Directory of Open Access Journals (Sweden)

    A. M. Nasukhova

    2014-01-01

    Full Text Available In article the review of the initial stage of researches of natural polyacetylene compounds is resulted. The high reactionary ability leading to fast oxidation and degradation of these compounds, especially at influence of Uf-light, oxygen of air, pH and other factors, has caused the serious difficulties connected with an establishment of structure and studying of their physical and chemical properties. Therefore the greatest quantity of works of this stage is connected with studying of essential oils of plants from families Apiaceae, Araliaceae, Asteraceae, Campanulaceae, Olacaceae, Pittosporaceae and Santalaceae where have been found out, basically, diacetylene compounds. About development of physical and chemical methods of the analysis of possibility of similar researches have considerably extended. More than 2000 polyacetylenes are known today, from them more than 1100 are found out in plants fam. Asteraceae. Revolution in the field of molecular biology has allowed to study processes of biosynthesis of these compounds intensively.

  13. Aminopropyl thiophene compounds

    International Nuclear Information System (INIS)

    Goodman, M.M.; Knapp, F.F.

    1990-01-01

    This patent describes radiopharmaceuticals useful in brain imaging comprising radiohalogenated thienylethylamine derivatives. The compounds are 5-halo-thiophene-2-isopropyl amines able to cross the blood-brain barrier and be retained for a sufficient length of time to allow the evaluation of regional blood flow by radioimaging of the brain

  14. Aminopropyl thiophene compounds

    Science.gov (United States)

    Goodman, Mark M.; Knapp, Jr., Furn F.

    1990-01-01

    Radiopharmaceuticals useful in brain imaging comprising radiohalogenated thienylethylamine derivatives. The compounds are 5-halo-thiophene-2-isopropyl amines able to cross the blood-brain barrier and be retained for a sufficient length of time to allow the evaluation of regional blood flow by radioimaging of the brain.

  15. Hyperon compound nucleus

    International Nuclear Information System (INIS)

    Yamazaki, Toshimitsu.

    1987-11-01

    The formation of various hypernuclei from K - absorption at rest is discussed from the viewpoints of compound decay of highly excited hypernuclei in contrast to the direct reaction mechanism. Recent (stopped K - , π) experiments at KEK as well as old data of emulsion and bubble chamber experiments are discussed. Some future direction of hypernuclear spectroscopy is suggested. (author)

  16. Toxicology of perfluorinated compounds

    Energy Technology Data Exchange (ETDEWEB)

    Stahl, Thorsten [Hessian State Laboratory, Wiesbaden (Germany); Mattern, Daniela; Brunn, Hubertus [Hessian State Laboratory, Giessen (Germany)

    2011-12-15

    Perfluorinated compounds [PFCs] have found a wide use in industrial products and processes and in a vast array of consumer products. PFCs are molecules made up of carbon chains to which fluorine atoms are bound. Due to the strength of the carbon/fluorine bond, the molecules are chemically very stable and are highly resistant to biological degradation; therefore, they belong to a class of compounds that tend to persist in the environment. These compounds can bioaccumulate and also undergo biomagnification. Within the class of PFC chemicals, perfluorooctanoic acid and perfluorosulphonic acid are generally considered reference substances. Meanwhile, PFCs can be detected almost ubiquitously, e.g., in water, plants, different kinds of foodstuffs, in animals such as fish, birds, in mammals, as well as in human breast milk and blood. PFCs are proposed as a new class of 'persistent organic pollutants'. Numerous publications allude to the negative effects of PFCs on human health. The following review describes both external and internal exposures to PFCs, the toxicokinetics (uptake, distribution, metabolism, excretion), and the toxicodynamics (acute toxicity, subacute and subchronic toxicities, chronic toxicity including carcinogenesis, genotoxicity and epigenetic effects, reproductive and developmental toxicities, neurotoxicity, effects on the endocrine system, immunotoxicity and potential modes of action, combinational effects, and epidemiological studies on perfluorinated compounds). (orig.)

  17. Chemical compounds in teak

    Directory of Open Access Journals (Sweden)

    Fernanda Viana da Silva Leonardo

    2015-09-01

    Full Text Available Quinone compounds are largely generated at extractive fraction of the woods in a complex and variable biological system. The literature has indications for many segments from food industry to pharmaceutical industry. Within the field of industrial use of wood, they are less desirable since they are treated only as incidental substances in production strings of pulp, paper, charcoal, and sawmill. In spite of its small amount, compared to other chemical compounds called essential, these substances have received special attention from researchers revealing a diverse range of offerings to market products textiles, pharmaceuticals, colorants, and other polymers, for which are being tested and employed. Quinones are found in fungi, lichens, and mostly in higher plants. Tectona grandis, usually called teak, is able to biosynthesize anthraquinones, which is a quinone compound, byproduct of secondary metabolism. This species provides wood that is much prized in the furniture sector and can also be exploited for metabolites to supply the market in quinone compounds and commercial development of new technologies, adding value to the plantations of this species within our country.

  18. Group Chemical Changes and Physical Property Correlations in Refining of Lube Base Stocks. Ir and Nmr Spectroscopy Corrélations entre les propriétés physiques et les changements de composition chimique au cours du raffinage des huiles de base. Spectrométrie infra rouge et résonance magnétique nucléaire

    Directory of Open Access Journals (Sweden)

    Singh H.

    2006-11-01

    Full Text Available Changes occurring in the chemical composition of lubricating oil base stocks with different degreeand typeof refining have been investigated by IR and NMR spectroscopy. Significant conclusions about the chemical composition have been reached through the study of structural parameters. Correlations between molecular parameters such as aromaticity , average number of carbon atoms per alkyl substituentand the Viscosity Indexof base oils are reported. The term degree of refininghas been assigned a quantitative value in combination with the VI to denote the progressive refining of raw lube distillates to base stocks. Les modifications de la composition chimique d'huiles lubrifiantes au cours de divers type de raffinage à des degrés variables de sévérité sont étudiées par spectrométries IR et RMN. L'étude des paramètres structuraux aboutit à des conclusions significatives sur la composition chimique. Des corrélations entre l'indice de viscosité et des paramètres structuraux tels que l'aromaticité et le nombre moyen d'atomes de carbone par substituant alkyl sont dégagées. On attribue au terme degré de raffinage une valeur quantitative - combiné avec l'indice de viscosité pour signifier le raffinage progressif de distillats bruts en huiles de base.

  19. Selenium-75-labelled foliate compounds

    International Nuclear Information System (INIS)

    1974-01-01

    A saturation method to analyze a foliate is presented; it uses competitive reaction of the compound to be measured and of a radioactive-labelled version of this compound with a reagent specific to this compound present in insufficient quantity to combine with the whole of the compound and its labelled version, separation of the bound compound from its non-bound homologue and measurement of the radioactivity concentration in the bound compound, the non-bound compound or both. The radioactive isotope used in the labelled foliate is selenium 75 [fr

  20. Activité larvicide sur Anopheles gambiae Giles et composition chimique des huiles essentielles extraites de quatre plantes cultivées au Cameroun

    Directory of Open Access Journals (Sweden)

    Tchoumbougnang F.

    2009-01-01

    Full Text Available Larvicidal activity against Anopheles gambiae Giles and chemical composition of essential oils from four plants cultivated in Cameroon. The chemical composition of the essential oils obtained by hydrodistillation of dry leaves from Cymbopogon citrates (DC. Stapf, Ocimum canum Sims, Ocimum gratissimum L. var 'gratissimum' L. and Thymus vulgaris L. cultivated in Cameroon were analyzed and their larvicidal activity against fourth instar larvae of Anopheles gambiae Giles were determined. The yields of extraction indicate that T. vulgaris (0.95% was richer in essential oil than C. citratus (0.67%. O. canum and O. gratissimum have approximately the same content in volatile constituents (0.59% and 0.60%, respectively. The analyses by GC and GC/MS showed that these oils are monoterpenic (86.8-97.4%. Oxygenated monoterpenes predominate in C. citratus and O. canum (81.6% and 68.9%, respectively while O. gratissimum oil contains a majority of monoterpene hydrocarbons (61.0%. T. vulgaris is characterized by the same proportion of monoterpene hydrocarbons (45.6% and oxygenated monoterpenes (48.9%. The main compounds found in the essential oil of C. citratus are acyclic monoterpenes such as geraniol (15.6%, geranial (39.3%, neral (21.9% and myrcene (14.0%. The essential oil of T. vulgaris is characterized by p-menthane structures given by thymol (40.1%, p-cymene (23.4% and γ-terpinene (15.1%; p-cymene (32.1% and thymol (24.3% were also the constituents quantitatively important in O. gratissimum essential oil while linalool (56.3% and limonene (10.9% were predominant in O. canum. Bioassay test done by the World Health Organization standard protocol revealed that these essential oils have remarkable larvicidal properties as they could induce 100% mortality in the larvae of A. gambiae at the concentration of 100 ppm for C. citratus, 200 ppm with T. vulgaris, 350 ppm for O. gratissimum and 400 ppm for O. canum. Their LC50 and LC80 show the same reactivity order

  1. La physique des bulles de champagne Une première approche des processus physico-chimiques liés à l'effervescence des vins de Champagne

    Science.gov (United States)

    Liger-Belair, G.

    2002-07-01

    bubble interface continuously increases and therefore continuously offers newly created surface to the adsorbed surface-active materials (around 5 mg/l, mostly composed of proteins and glycoproteins). Champagne bubbles experience an interesting competition between two opposing effects. Our results suggest that the bubble growth during ascent approximately balance the adsorption rate of surface-active compounds on the rising bubble. We also compared the behaviour of champagne bubbles with that of beer bubbles. It was found that beer bubbles showed a behaviour, very close to that of rigid spheres. This is not a surprising result, since beer contains much higher amounts of surface-active molecules (of order of several hundreds mg/l) likely to be adsorbed at a bubble interface. Furthermore, since the gas content is lower in beer, growth rates of beer bubbles are lower than those of champagne. As a result, the dilution effect due to the rate of dilatation of the bubble area may be too weak to avoid the rigidification of the beer bubble interface. In a third set of experiments, we used instantaneous high-speed photography techniques to freeze the dynamics of bubbles collapsing at the free surface of a glass poured with champagne. The process following bubble collapse and leading to the projection of a high-speed liquid jet above the free surface was captured. A structural analogy between the liquid jet following a bubble collapse and the liquid jet following a drop impact was presented. By drawing a parallel between the fizz in champagne wines and the “fizz of the ocean", we also suggested that droplets issued from champagne bursting bubbles contain much higher amounts of surface-active and potentially aromatic materials than the liquid bulk. The bursting of champagne bubbles is thus expected to play a major role in flavour release. Otherwise, since the first photographic investigation were published about fifty years ago, numerous experiments have been conducted with single

  2. Compound semiconductor device modelling

    CERN Document Server

    Miles, Robert

    1993-01-01

    Compound semiconductor devices form the foundation of solid-state microwave and optoelectronic technologies used in many modern communication systems. In common with their low frequency counterparts, these devices are often represented using equivalent circuit models, but it is often necessary to resort to physical models in order to gain insight into the detailed operation of compound semiconductor devices. Many of the earliest physical models were indeed developed to understand the 'unusual' phenomena which occur at high frequencies. Such was the case with the Gunn and IMPATI diodes, which led to an increased interest in using numerical simulation methods. Contemporary devices often have feature sizes so small that they no longer operate within the familiar traditional framework, and hot electron or even quantum­ mechanical models are required. The need for accurate and efficient models suitable for computer aided design has increased with the demand for a wider range of integrated devices for operation at...

  3. Chemical composition and geological age of french pitchblendes and uraninite of Ivory Coast; Composition chimique et age geologique de pechblendes francaises et de l'uraninite de Cote d'Ivoire

    Energy Technology Data Exchange (ETDEWEB)

    Chervet, M; Guillemin, M; Hemery, MME; Pellas, M [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

    1953-07-01

    The determination of the geological age of the uraninite of Ivory Coast in particular, has a very big importance since it permits to date the granito-gneissic basement of this part of Africa and moreover it is one of the most former known uraninites. The emotion caused in some geologists surroundings by the announcement of the date, fixed to close to 2 billions of years for this part of Africa, incited us to make control our assessment by the isotope analysis of lead. Before the concordance really astonishing of the results gotten by two entirely different methods, the publication of our works could not be differed more. The geological age of the uraninite of Coast of Ivory determined to the Laboratory of Mineralogy is of 1933 millions of years: by the calculation given with the help of the logarithmic and based shape on the chemical analysis of the uraninite (precise dosages of U, Pb and Th); by the isotope analysis, this age is about: 1940 {+-} 20 millions of years. We conducted the same operations for several French pitchblendes as the Crousille, Bauzot, Bigay. (M.B.) [French] La determination de l'age geologique de l'uraninite de Cote d'Ivoire en particulier, a une tres grosse importance puisqu'elle permet de dater le socle granito-gneissique de cette partie de l'Afrique et de plus, c'est une des plus anciennes uraninites connues. L'emotion causee dans certains milieux de geologues par l'annonce de la date, fixee a pres de 2 milliards d'annees pour cette partie de l'Afrique, nous a incites a faire controler nos determinations par l'analyse isotopique du plomb. Devant la concordance vraiment etonnante des resultats obtenus par deux methodes entierement differentes, la publication de nos travaux ne pouvait plus etre differee. L'age geologique de l'uraninite de Cote d'Ivoire determine au Laboratoire de Mineralogie est de 1933 millions d'annees: par le calcul donne a l'aide de la forme logarithmique et base sur l'analyse chimique de l'uraninite (dosages precis de U

  4. Tripolar Mesoionic Compounds

    OpenAIRE

    Shuki, Araki; Jiro, Mizuya; Naomitsu, Aoyama; Yasuo, Butsugan

    1995-01-01

    Tripolar mesoionic compounds have been synthesized by the reaction of (1,3-diphenyltetrazol-5-ylio)cyclopentadienide (or -indenide) with the dicationic ether salts derived from mesoionic olates and trifluoromethanesulfonic anhydride. The structures of the newly prepared mesoionic systems are discussed on the basis of spectroscopic analysis; it is shown that the tripolar [tetrazolium-cyclopentadienide (or indenide)-tetrazolium] canonical structure contributes significantly to the ground state ...

  5. Oligosilanylated Antimony Compounds

    OpenAIRE

    Zitz, Rainer; Gatterer, Karl; Reinhold, Crispin R. W.; M?ller, Thomas; Baumgartner, Judith; Marschner, Christoph

    2015-01-01

    By reactions of magnesium oligosilanides with SbCl3, a number of oligosilanylated antimony compounds were obtained. When oligosilanyl dianions were used, either the expected cyclic disilylated halostibine was obtained or alternatively the formation of a distibine was observed. Deliberate formation of the distibine from the disilylated halostibine was achieved by reductive coupling with C8K. Computational studies of Sb?Sb bond energies, barriers of pyramidal inversion at Sb, and the conformati...

  6. Labelled compounds. (Pt. B)

    International Nuclear Information System (INIS)

    Buncel, E.; Jones, J.R.

    1991-01-01

    Since the end of World War II there has been a tremendous increase in the number of compounds that have been synthesized with radioactive or stable isotopes. They have found application in many diverse fields, so much so, that hardly a single area in pure and applied science has not benefited. Not surprisingly it has been reflected in appearance of related publications. The early proceedings of the Symposia on Advances in Trace Methodology were soon followed by various Euratom sponsored meetings in which methods of preparing and storing labelled compounds featured prominently. In due course a resurgence of interest in stable isotopes, brought about by their greater availability (also lower cost) and partly by development of new techniques such as gas chromatography - mass spectrometry (gc-ms), led to the publication of proceedings of several successful conferences. More recently conferences dealing with the synthesis and applications of isotopes and isotopically labelled compounds have been established on a regular basis. In addition to the proceedings of conferences and journal publications individuals left their mark by producing definitive texts, usually on specific nuclides. Only the classic two volume publication of Murray and Williams (Organic syntheses with isotopes, New York 1985), now over 30 years old and out of print, attempted to do justice to several nuclides. With the large amount of work that has been undertaken since then it seems unlikely that an updated edition could be produced. The alternative strategy was to ask scientists currently active to review specific areas and this is the approach adopted in the present series of monographs. In this way it is intended to cover the broad advances that have been made in the synthesis and applications of isotopes and isotopically labelled compounds in the physical and biomedical sciences. (author). refs.; figs.; tabs

  7. Process for compound transformation

    KAUST Repository

    Basset, Jean-Marie

    2016-12-29

    Embodiments of the present disclosure provide for methods of using a catalytic system to chemically transform a compound (e.g., a hydrocarbon). In an embodiment, the method does not employ grafting the catalyst prior to catalysis. In particular, embodiments of the present disclosure provide for a process of hydrocarbon (e.g., C1 to C20 hydrocarbon) metathesis (e.g., alkane, olefin, or alkyne metathesis) transformation, where the process can be conducted without employing grafting prior to catalysis.

  8. Compound Semiconductor Radiation Detector

    International Nuclear Information System (INIS)

    Kim, Y. K.; Park, S. H.; Lee, W. G.; Ha, J. H.

    2005-01-01

    In 1945, Van Heerden measured α, β and γ radiations with the cooled AgCl crystal. It was the first radiation measurement using the compound semiconductor detector. Since then the compound semiconductor has been extensively studied as radiation detector. Generally the radiation detector can be divided into the gas detector, the scintillator and the semiconductor detector. The semiconductor detector has good points comparing to other radiation detectors. Since the density of the semiconductor detector is higher than that of the gas detector, the semiconductor detector can be made with the compact size to measure the high energy radiation. In the scintillator, the radiation is measured with the two-step process. That is, the radiation is converted into the photons, which are changed into electrons by a photo-detector, inside the scintillator. However in the semiconductor radiation detector, the radiation is measured only with the one-step process. The electron-hole pairs are generated from the radiation interaction inside the semiconductor detector, and these electrons and charged ions are directly collected to get the signal. The energy resolution of the semiconductor detector is generally better than that of the scintillator. At present, the commonly used semiconductors as the radiation detector are Si and Ge. However, these semiconductor detectors have weak points. That is, one needs thick material to measure the high energy radiation because of the relatively low atomic number of the composite material. In Ge case, the dark current of the detector is large at room temperature because of the small band-gap energy. Recently the compound semiconductor detectors have been extensively studied to overcome these problems. In this paper, we will briefly summarize the recent research topics about the compound semiconductor detector. We will introduce the research activities of our group, too

  9. Bronzes and relative compounds

    International Nuclear Information System (INIS)

    Uehlls, A.

    1987-01-01

    Preparation and the crystal structure of bronzes based on complex oxides of transition (Ti, V, Nb, Ta, Mo, W, Re, Ru and etc.) and alkali metals, as well as oxides of some other elements (Sr, In, La and etc.) are described. Peculiarities of formation of the structure of tetragonal, tungsten, molybdenum, vanadium bronzes and their analogs depending on the chemical composition of these compounds are considered

  10. Compound Wiretap Channels

    Directory of Open Access Journals (Sweden)

    Shlomo Shamai (Shitz

    2009-01-01

    Full Text Available This paper considers the compound wiretap channel, which generalizes Wyner's wiretap model to allow the channels to the (legitimate receiver and to the eavesdropper to take a number of possible states. No matter which states occur, the transmitter guarantees that the receiver decodes its message and that the eavesdropper is kept in full ignorance about the message. The compound wiretap channel can also be viewed as a multicast channel with multiple eavesdroppers, in which the transmitter sends information to all receivers and keeps the information secret from all eavesdroppers. For the discrete memoryless channel, lower and upper bounds on the secrecy capacity are derived. The secrecy capacity is established for the degraded channel and the semideterministic channel with one receiver. The parallel Gaussian channel is further studied. The secrecy capacity and the secrecy degree of freedom (s.d.o.f. are derived for the degraded case with one receiver. Schemes to achieve the s.d.o.f. for the case with two receivers and two eavesdroppers are constructed to demonstrate the necessity of a prefix channel in encoder design. Finally, the multi-antenna (i.e., MIMO compound wiretap channel is studied. The secrecy capacity is established for the degraded case and an achievable s.d.o.f. is given for the general case.

  11. Antifungal compounds from cyanobacteria.

    Science.gov (United States)

    Shishido, Tânia K; Humisto, Anu; Jokela, Jouni; Liu, Liwei; Wahlsten, Matti; Tamrakar, Anisha; Fewer, David P; Permi, Perttu; Andreote, Ana P D; Fiore, Marli F; Sivonen, Kaarina

    2015-04-13

    Cyanobacteria are photosynthetic prokaryotes found in a range of environments. They are infamous for the production of toxins, as well as bioactive compounds, which exhibit anticancer, antimicrobial and protease inhibition activities. Cyanobacteria produce a broad range of antifungals belonging to structural classes, such as peptides, polyketides and alkaloids. Here, we tested cyanobacteria from a wide variety of environments for antifungal activity. The potent antifungal macrolide scytophycin was detected in Anabaena sp. HAN21/1, Anabaena cf. cylindrica PH133, Nostoc sp. HAN11/1 and Scytonema sp. HAN3/2. To our knowledge, this is the first description of Anabaena strains that produce scytophycins. We detected antifungal glycolipopeptide hassallidin production in Anabaena spp. BIR JV1 and HAN7/1 and in Nostoc spp. 6sf Calc and CENA 219. These strains were isolated from brackish and freshwater samples collected in Brazil, the Czech Republic and Finland. In addition, three cyanobacterial strains, Fischerella sp. CENA 298, Scytonema hofmanni PCC 7110 and Nostoc sp. N107.3, produced unidentified antifungal compounds that warrant further characterization. Interestingly, all of the strains shown to produce antifungal compounds in this study belong to Nostocales or Stigonematales cyanobacterial orders.

  12. Toxic compounds in honey.

    Science.gov (United States)

    Islam, Md Nazmul; Khalil, Md Ibrahim; Islam, Md Asiful; Gan, Siew Hua

    2014-07-01

    There is a wealth of information about the nutritional and medicinal properties of honey. However, honey may contain compounds that may lead to toxicity. A compound not naturally present in honey, named 5-hydroxymethylfurfural (HMF), may be formed during the heating or preservation processes of honey. HMF has gained much interest, as it is commonly detected in honey samples, especially samples that have been stored for a long time. HMF is a compound that may be mutagenic, carcinogenic and cytotoxic. It has also been reported that honey can be contaminated with heavy metals such as lead, arsenic, mercury and cadmium. Honey produced from the nectar of Rhododendron ponticum contains alkaloids that can be poisonous to humans, while honey collected from Andromeda flowers contains grayanotoxins, which can cause paralysis of limbs in humans and eventually leads to death. In addition, Melicope ternata and Coriaria arborea from New Zealand produce toxic honey that can be fatal. There are reports that honey is not safe to be consumed when it is collected from Datura plants (from Mexico and Hungary), belladonna flowers and Hyoscamus niger plants (from Hungary), Serjania lethalis (from Brazil), Gelsemium sempervirens (from the American Southwest), Kalmia latifolia, Tripetalia paniculata and Ledum palustre. Although the symptoms of poisoning due to honey consumption may differ depending on the source of toxins, most common symptoms generally include dizziness, nausea, vomiting, convulsions, headache, palpitations or even death. It has been suggested that honey should not be considered a completely safe food. Copyright © 2013 John Wiley & Sons, Ltd.

  13. Antifungal Compounds from Cyanobacteria

    Directory of Open Access Journals (Sweden)

    Tânia K. Shishido

    2015-04-01

    Full Text Available Cyanobacteria are photosynthetic prokaryotes found in a range of environments. They are infamous for the production of toxins, as well as bioactive compounds, which exhibit anticancer, antimicrobial and protease inhibition activities. Cyanobacteria produce a broad range of antifungals belonging to structural classes, such as peptides, polyketides and alkaloids. Here, we tested cyanobacteria from a wide variety of environments for antifungal activity. The potent antifungal macrolide scytophycin was detected in Anabaena sp. HAN21/1, Anabaena cf. cylindrica PH133, Nostoc sp. HAN11/1 and Scytonema sp. HAN3/2. To our knowledge, this is the first description of Anabaena strains that produce scytophycins. We detected antifungal glycolipopeptide hassallidin production in Anabaena spp. BIR JV1 and HAN7/1 and in Nostoc spp. 6sf Calc and CENA 219. These strains were isolated from brackish and freshwater samples collected in Brazil, the Czech Republic and Finland. In addition, three cyanobacterial strains, Fischerella sp. CENA 298, Scytonema hofmanni PCC 7110 and Nostoc sp. N107.3, produced unidentified antifungal compounds that warrant further characterization. Interestingly, all of the strains shown to produce antifungal compounds in this study belong to Nostocales or Stigonematales cyanobacterial orders.

  14. Compound Wiretap Channels

    Directory of Open Access Journals (Sweden)

    Kramer Gerhard

    2009-01-01

    Full Text Available Abstract This paper considers the compound wiretap channel, which generalizes Wyner's wiretap model to allow the channels to the (legitimate receiver and to the eavesdropper to take a number of possible states. No matter which states occur, the transmitter guarantees that the receiver decodes its message and that the eavesdropper is kept in full ignorance about the message. The compound wiretap channel can also be viewed as a multicast channel with multiple eavesdroppers, in which the transmitter sends information to all receivers and keeps the information secret from all eavesdroppers. For the discrete memoryless channel, lower and upper bounds on the secrecy capacity are derived. The secrecy capacity is established for the degraded channel and the semideterministic channel with one receiver. The parallel Gaussian channel is further studied. The secrecy capacity and the secrecy degree of freedom ( are derived for the degraded case with one receiver. Schemes to achieve the for the case with two receivers and two eavesdroppers are constructed to demonstrate the necessity of a prefix channel in encoder design. Finally, the multi-antenna (i.e., MIMO compound wiretap channel is studied. The secrecy capacity is established for the degraded case and an achievable is given for the general case.

  15. Une plate-forme sans fil pour electrochimique spectroscopie d'impédance

    OpenAIRE

    Ghaffari, Seyed Alireza

    2015-01-01

    Avec l’émergence soutenue de capteurs et de dispositifs électrochimiques innovants, la spectroscopie d'impédance électrochimique est devenue l'un des outils les plus importants pour la caractérisation et la modélisation de la matière ionique et de l'interfaçage des capteurs. La capacité de détecter automatiquement, à l’aide de dispositifs électrochimiques peu couteux, les caractéristiques physiques et chimiques de la matière ionique ouvre une gamme d’application très variée pour la compréhens...

  16. Nomenclature on an inorganic compound

    International Nuclear Information System (INIS)

    1998-10-01

    This book contains eleven chapters : which mention nomenclature of an inorganic compound with introduction and general principle on nomenclature of compound. It gives the description of grammar for nomenclature such as brackets, diagonal line, asterisk, and affix, element, atom and groups of atom, chemical formula, naming by stoichiometry, solid, neutral molecule compound, ion, a substituent, radical and name of salt, oxo acid and anion on introduction and definition of oxo acid, coordination compound like symbol of stereochemistry , boron and hydrogen compound and related compound.

  17. Developpement de techniques numeriques pour l'estimation, la modelisation et la prediction de proprietes thermodynamiques et structurales de systems metalliques a fort ordonnancement chimique

    Science.gov (United States)

    Harvey, Jean-Philippe

    consistent thermodynamic, physical and structural data for solid, liquid, and stoichiometric compounds and the subsequent parameterization of their respective thermodynamic model lead to the first description of the complete Al-Zr phase diagram in the range of composition [0 ≤ XZr ≤ 5 / 9] based on theoretical and fully consistent thermodynamic properties. MC and MD simulations are performed for the Al-Zr system to define for the first time the precise thermodynamic behaviour of the amorphous phase for its entire range of composition. Finally, all the thermodynamic models for the liquid phase, the FCC solid solution and the amorphous phase are used to define conditions based on thermodynamic and volumetric considerations that favor the amorphization of Al-Zr alloys.

  18. Offset Compound Gear Drive

    Science.gov (United States)

    Stevens, Mark A.; Handschuh, Robert F.; Lewicki, David G.

    2010-01-01

    The Offset Compound Gear Drive is an in-line, discrete, two-speed device utilizing a special offset compound gear that has both an internal tooth configuration on the input end and external tooth configuration on the output end, thus allowing it to mesh in series, simultaneously, with both a smaller external tooth input gear and a larger internal tooth output gear. This unique geometry and offset axis permits the compound gear to mesh with the smaller diameter input gear and the larger diameter output gear, both of which are on the same central, or primary, centerline. This configuration results in a compact in-line reduction gear set consisting of fewer gears and bearings than a conventional planetary gear train. Switching between the two output ratios is accomplished through a main control clutch and sprag. Power flow to the above is transmitted through concentric power paths. Low-speed operation is accomplished in two meshes. For the purpose of illustrating the low-speed output operation, the following example pitch diameters are given. A 5.0 pitch diameter (PD) input gear to 7.50 PD (internal tooth) intermediate gear (0.667 reduction mesh), and a 7.50 PD (external tooth) intermediate gear to a 10.00 PD output gear (0.750 reduction mesh). Note that it is not required that the intermediate gears on the offset axis be of the same diameter. For this example, the resultant low-speed ratio is 2:1 (output speed = 0.500; product of stage one 0.667 reduction and stage two 0.750 stage reduction). The design is not restricted to the example pitch diameters, or output ratio. From the output gear, power is transmitted through a hollow drive shaft, which, in turn, drives a sprag during which time the main clutch is disengaged.

  19. Toxicology of alkylmercury compounds.

    Science.gov (United States)

    Aschner, Michael; Onishchenko, Natalia; Ceccatelli, Sandra

    2010-01-01

    Methylmercury is a global pollutant and potent neurotoxin whose abundance in the food chain mandates additional studies on the consequences and mechanisms of its toxicity to the central nervous system. Formulation of our new hypotheses was predicated on our appreciation for (a) the remarkable affinity of mercurials for the anionic form of sulfhydryl (-SH) groups, and (b) the essential role of thiols in protein biochemistry. The present chapter addresses pathways to human exposure of various mercury compounds, highlighting their neurotoxicity and potential involvement in neurotoxic injury and neurodegenerative changes, both in the developing and senescent brain. Mechanisms that trigger these effects are discussed in detail.

  20. Compound composite odontoma

    Directory of Open Access Journals (Sweden)

    S Kailasam

    2012-01-01

    Full Text Available Odontomas are the most common type of odontogenic tumors and generally they are asymptomatic. Frequently, it may interfere with the eruption of the teeth. This is a case report of a compound composite odontoma in a 10-year-old girl, which results in failure of eruption of the permanent upper right central incisor while the contralateral tooth had erupted. A calcified mass was seen in the radiograph and was provisionally diagnosed as odontoma following which the odontoma was enucleated. Routine follow-up was done for more than a year and no recurrence was seen. This case report indicates that early diagnosis and management ensures better prognosis.

  1. Flavour Compounds in Fungi

    DEFF Research Database (Denmark)

    Ravasio, Davide Antonio

    . This selection of strains was used in fermentations with the aim of identifying new interesting flavour producers. Fermentation profiles, volatile analyses, off-flavour identification and resistance to osmotic/oxidative stress have been addressed to highlight new candidates to use for industrial applications....... This resulted in the identification of Wickerhamomyces anomalus and Pichia kluyveri as high producers of esters fruity compounds, which contribute to enhance the complexity of wine and beer product. In addition the strain Debaromyces subglobosus showed high yields of aldehydes and fruity ketones, which...

  2. Antifouling Compounds from Marine Invertebrates.

    Science.gov (United States)

    Qi, Shu-Hua; Ma, Xuan

    2017-08-28

    In this review, a comprehensive overview about the antifouling compounds from marine invertebrates is described. In total, more than 198 antifouling compounds have been obtained from marine invertebrates, specifically, sponges, gorgonian and soft corals.

  3. Antifouling Compounds from Marine Invertebrates

    OpenAIRE

    Qi, Shu-Hua; Ma, Xuan

    2017-01-01

    In this review, a comprehensive overview about the antifouling compounds from marine invertebrates is described. In total, more than 198 antifouling compounds have been obtained from marine invertebrates, specifically, sponges, gorgonian and soft corals.

  4. Chemical Changes Induced by Irradiation in Meats and Meat Components; Transformations Chimiques Provoquees par les Rayonnements dans les Viandes et Leurs Constituants; Khimicheskie prevrashcheniya v myasnykh produktakh i ikh sostavnykh chastyakh pod vozdejstviem oblucheniya; Alteraciones Quimicas Producidas por Irradiacion de las Carnes y de sus Componentes

    Energy Technology Data Exchange (ETDEWEB)

    Merritt, C. Jr. [Pioneering Research Division, United States Army Natick Laboratories, Natick, MA (United States)

    1966-11-15

    The acceptability of meats preserved by irradiation has been hampered by the formation of an irradiation flavour and odour. This flavour and odour is believed to be due to the volatile chemical compounds produced by radiation impact on the protein and lipid molecules. The analysis of the volatile compounds has been accomplished, employing programmed cryogenic temperature gas chromatography for separation of the complex mixtures obtained, and rapid scanning mass spectrometry for identification of the individually separated components. Comprehensive analyses of the volatiles from irradiated ground beef, pork, mutton, lamb, and veal, as well as the volatile irradiation degradation products of several amino acids and proteins, animal fats, methyl esters of fatty acids, and triglycerides have been made. The results of the analysis of the irradiated component meat substances are compared with those obtained from the irradiation of meat itself, and of separate meat fractions, thus establishing the contribution of each fraction to the total. Mechanisms are postulated for the formation of the volatile components from each fraction and for interactions among intermediates from different fractions. (author) [French] La comestibilite des viandes conservees par les rayonnements s'est trouvee diminuee a la suite de l'apparition dans celles-ci d'un gout et d'une odeur engendres par l'irradiation. On pense que ces derniers sont dus aux composes chimiques volatils qui sont formes par l'action des rayonnements sur les molecules des proteines et des lipides. Il a ete procede a l'analyse des composes volatils a l'aide d'un programme de chromatographie en phase gazeuse a temperature cryogenique visant a separer les constituants des melanges complexes obtenus, et par spectrometrie de masse a balayage rapide destinee a identifier les constituants separes. L'auteur a effectue des analyses completes des composes volatils emanant de viande hachee de boeuf, de porc, de mouton, d'agneau et de

  5. Catalytic properties of niobium compounds

    International Nuclear Information System (INIS)

    Tanabe, K.; Iizuka, T.

    1983-04-01

    The catalytic activity and selectivity of niobium compounds including oxides, salts, organometallic compounds and others are outlined. The application of these compounds as catalysts to diversified reactions is reported. The nature and action of niobium catalysts are characteristic and sometimes anomalous, suggesting the necessity of basic research and the potential use as catalysts for important processes in the chemical industry. (Author) [pt

  6. Molecular modeling of inorganic compounds

    National Research Council Canada - National Science Library

    Comba, Peter; Hambley, Trevor W; Martin, Bodo

    2009-01-01

    ... mechanics to inorganic and coordination compounds. Initially, simple metal complexes were modeled, but recently the field has been extended to include organometallic compounds, catalysis and the interaction of metal ions with biological macromolecules. The application of molecular mechanics to coordination compounds is complicated by the numbe...

  7. Organometallic compounds in the environment

    National Research Council Canada - National Science Library

    Craig, P. J

    2003-01-01

    ... of Organometallic Species in the Environment 20 1.10 Stability of Organometallic Compounds in Biological Systems 1.11 G eneral Comments on the Toxicities of Organometallic Compounds 22 1.12 General Considerations on Environmental R eactivity of Organometallic Compounds 24 1.13 Microbial Biotransformation of Metals and M etalloids 25 1.13.1 Introduction 25 1...

  8. Goldenphilicity: Luminescent gold compounds

    International Nuclear Information System (INIS)

    Sansores, L.E.

    2002-01-01

    In the solids and molecules different types of bonds are presented depending on the involved atoms, covalent bonds are common among elements of open shell, where more bond orbitals are filled than anti bond orbitals. It is expected that ionic bonds among closed shell atoms which have charges of opposite sign. Bonds type Van der Waals are presented among molecules which have a bipolar moment. It would not be expected bonds among zero charge species, or more generally with the same nominal charge and in any case the attractive forces would be very small. In fact it is expected that two metallic cations to be repelled each other. There recently is evidence that in organic or organometallic compounds could exist attractive interactions between two cations of the d 8 -d 10 -s 2 families. These bonds are weak but stronger than those of Van der Waals. They are compared with the hydrogen bonds. In this work it was reviewed some examples in which the goldenphilicity plays an important role in the luminescence that the gold complexes present. Examples of mono, bi and trinuclear and the structures that these organometallic compounds could take are examined. (Author)

  9. Semiconducting III-V compounds

    CERN Document Server

    Hilsum, C; Henisch, Heinz R

    1961-01-01

    Semiconducting III-V Compounds deals with the properties of III-V compounds as a family of semiconducting crystals and relates these compounds to the monatomic semiconductors silicon and germanium. Emphasis is placed on physical processes that are peculiar to III-V compounds, particularly those that combine boron, aluminum, gallium, and indium with phosphorus, arsenic, and antimony (for example, indium antimonide, indium arsenide, gallium antimonide, and gallium arsenide).Comprised of eight chapters, this book begins with an assessment of the crystal structure and binding of III-V compounds, f

  10. Volatile organic compounds

    International Nuclear Information System (INIS)

    Silseth, May Liss

    1998-01-01

    The goal is: Not more emission of volatile organic compounds (VOCs) than necessary. The items discussed in this presentation are the VOCs, how to calculate emission of VOCs, how to reduce or avoid them, and different recovery processes. The largest source of Norwegian emissions of non methane VOCs (NMVOCs) is offshore loading of raw petroleum. Emissions of VOCs should be reduced mainly for two reasons: (1) on sunny days NMVOCs may react with NOx to form ozon and smog close to the surface, (2) ozone and smog close to the surface may be harmful to plants and animals, and they are hazardous to human health. As for the calculation of VOC emissions, the VOCON project will release the calculation program HCGASS in 1999. This project is a cooperative project headed by SINTEF/Marintek

  11. Synthesis of labeled compounds

    International Nuclear Information System (INIS)

    Whaley, T.W.

    1977-01-01

    Intermediate compounds labeled with 13 C included methane, sodium cyanide, methanol, ethanol, and acetonitrile. A new method for synthesizing 15 N-labeled 4-ethylsulfonyl-1-naphthalene-sulfonamide was developed. Studies were conducted on pathways to oleic-1- 13 C acid and a second pathway investigated was based on carbonation of 8-heptadecynylmagnesium bromide with CO 2 to prepare sterolic acid. Biosynthetic preparations included glucose- 13 C from starch isolated from tobacco leaves following photosynthetic incubation with 13 CO 2 and galactose- 13 C from galactosylglycerol- 13 C from kelp. Research on growth of organisms emphasized photosynthetic growth of algae in which all cellular carbon is labeled. Preliminary experiments were performed to optimize the growth of Escherichia coli on sodium acetate- 13 C

  12. Deposition of acidifying compounds

    International Nuclear Information System (INIS)

    Fowler, D.; Cape, J.N.; Sutton, M.A.; Mourne, R.; Hargreaves, K.J.; Duyzer, J.H.; Gallagher, M.W.

    1992-01-01

    Inputs of acidifying compounds to terrestrial ecosystems include deposition of the gases NO 2 , NO, HNO 2 , HNO 3 , NH 3 and SO 2 and the ions NO 3- , NH 4+ , SO 4 2- and H + in precipitation, cloud droplets and particles. Recent research has identified particular ecosystems and regions in which terrestrial effects are closely linked with specific deposition processes. This review paper identifies areas in which important developments have occurred during the last five years and attempts to show which aspects of the subject are most important for policy makers. Amongst the conclusions drawn, the authors advise that current uncertainties in estimates of S and N inputs by dry deposition should be incorporated in critical load calculations, and that, in regions dominated by wet deposition, spatial resolution of total inputs should be improved to match the current scales of information on landscape sensitivity to acidic inputs. 44 refs., 9 figs

  13. Numerical Simulation of Fixed-Bed Catalytic Reforming Reactors: Hydrodynamics / Chemical Kinetics Coupling Simulation numérique des réacteurs de reformage catalytique en lit fixe : couplage hydrodynamique-cinétique chimique

    Directory of Open Access Journals (Sweden)

    Ferschneider G.

    2006-11-01

    proposée est basée sur l'écriture multidimensionnelle et la résolution simultanée des équations locales de conservation. L'exemple traité est relatif aux réacteurs de reformage catalytique en lit fixe. Les particularités de ces réacteurs sont leur géométrie annulaire et la circulation radiale de la charge à traiter. L'écoulement est supposé axisymétrique. Le processus réactionnel est traduit par un schéma cinétique simplifié faisant intervenir 10 espèces chimiques. Le calcul des champs hydrodynamiques (vitesses moyennes, pression, thermique et massique (concentration de chaque espèce permet de mettre en évidence l'influence d'internes dans deux géométries de réacteur industriel. La cartographie de la quantité de coke formée et déposée sur le catalyseur, calculée par le modèle révèle les zones éventuelles de mauvais fonctionnement.

  14. Contribution to research on the metabolism of fission product. Studies on the physico-chemical state and the metabolic fate of radio-cerium solution; Contribution a l'etude du metabolisme des produits de fission. Recherches sur l'etat physico-chimique et le devenir metabolique des solutions de radiocerium

    Energy Technology Data Exchange (ETDEWEB)

    Aeberhardt, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    This paper describes a study of the physico-chemical state of radio-cerium in dilute solutions on the tracer scale, as a function of the pH of the solution. The way in which this radioelement is transported in the blood is studied in vitro and in vivo, with reference to the ionic or colloidal state of the radio-cerium used. The distribution of cerium amongst the various components of the blood is studied by a new method of blood fractionation and by paper electrophoresis. Evidence of a cerium globulin connection is shown in the case of ionic cerium. A study of the initial distribution of radio-cerium in rats, after intravenous administration of ionic or colloidal solutions, shows considerable differences according to the physico-chemical state of the cerium injected. (author) [French] Ce travail presente une etude de l'etat physico-chimique du radiocerium en solutions diluees a l'echelle des indicateurs, en fonction du pH de la solution. En fonction de l'etat ionique ou colloidal du radiocerium utilise, le mode de transport de ce radioelement dans le sang est etudie in vitro et in vivo. La distribution du cerium entre les differents constituants du sang est etudiee par une methode nouvelle de fractionnement du sang et par electrophorese sur papier. L'existence d'une liaison cerium-globuline est mise en evidence dans le cas du cerium ionique. L'etude de la distribution initiale du radiocerium, chez le rat apres administration par voie veineuse de solutions ionique ou colloidale, montre des differences importantes en fonction de l'etat physico-chimique du cerium injecte. (auteur)

  15. Conservation, transformation et composition chimique des arilles ...

    African Journals Online (AJOL)

    Les solutions basiques de bicarbonate de sodium et de potassium apparaissent plus adaptées pour la conservation (2 – 3 mois) des arilles frais. Séchés, ces arilles se révèlent riches en lipides (48,46±0,42%) et peuvent être exploités pour une extraction industrielle d'huile. Ils se prêtent bien à la transformation en une ...

  16. Researches on vanadium and its compounds; Recherches sur le Vanadium et ses composes

    Energy Technology Data Exchange (ETDEWEB)

    Morette, Andre

    1937-06-03

    In this research thesis, the author proposes a new study of the action of some reduction agents on two groups of vanadium compounds, oxides and chlorides. Thus, he reports the study of the circumstances of reduction of vanadium oxides by carbon and of vanadium carburization from these compounds. He also reports the determination of the composition of vanadium melts obtained at high temperatures (either in a vacuum furnace or with an electric arc furnace). In order to determine in which conditions the processing of vanadium oxides could produce the pure metal, the author studied the action of calcium and magnesium on the vanadium pentoxide and trioxide. The second part of the thesis addresses the preparation of pure vanadium from vanadium anhydride chlorides. Then, the author reports the development of processes which could easily produce powdered vanadium [French] Nous nous sommes propose de reprendre l'etude de l'action de quelques reducteurs sur les deux groupes de composes du vanadium, oxydes et chlorures. Nous avons ete ainsi amene a preciser les circonstances de la reduction des oxydes de vanadium par le carbone et de la carburation du vanadium a partir de ceux-ci, puis a determiner la constitution des fontes de vanadium obtenues a haute temperature, soit au four a vide, soit au four a arc. D'autre part, en vue de determiner dans quelles conditions le traitement des oxydes de vanadium pourrait conduire au metal pur, nous avons repris et complete des travaux anterieurs concernant l'action du calcium et du magnesium sur le pentoxyde ou eventuellement le trioxyde de vanadium. Une seconde partie de notre these a ete consacree a la preparation du vanadium pur a partir des chlorures anhydres de vanadium. Nous nous sommes attache a trouver le mode operatoire le plus favorable pour l'obtention de chacun d'eux. Il nous a ete donne ainsi l'occasion de preciser certaines de leurs proprietes physiques et chimiques. Puis, a la suite d'essais systematiques, nous avons

  17. TSTA compound cryopump

    International Nuclear Information System (INIS)

    Batzer, T.H.; Patrick, R.E.; Call, W.R.

    1980-01-01

    The Tritium System Test Assembly (TSTA), at the Los Alamos Scientific Laboratory, is intended to demonstrate realistic fuel supply and cleanup scenarios for future fusion reactors. The vacuum pumps must be capable of handling large quantities of reactor exhaust gases consisting largely of mixtures of hydrogen and helium isotopes. Cryocondensing pumps will not pump helium at 4.2 K; while cryosorption pumps using molecular sieves or charcoal have good helium pumping speed, the adsorbent clogs with condensed hydrogen while pumping mixtures of both. A solution to this problem is a compound design whereby the first stage condenses the hydrogen and the second, or sorption, stage pumps the helium. The TSTA pump designed at Lawrence Livermore National Laboratory uses argon gas to cryotrap the helium in the helium-hydrogen mixture. The argon is sprayed directly onto the 4.2 K surface at a rate proportional to the helium flow rate, permitting continuous pumping of the helium-hydrogen mixtures in a single-stage pump. However, the possibility of differential desorption as a first stage in the TSTA gas separation cycle required the inclusion of a first-stage hydrogen isotope condenser. The design, performance, and operating characteristics are discussed

  18. Pluto's Nonvolatile Chemical Compounds

    Science.gov (United States)

    Grundy, William M.; Binzel, Richard; Cook, Jason C.; Cruikshank, Dale P.; Dalle Ore, Cristina M.; Earle, Alissa M.; Ennico, Kimberly; Jennings, Donald; Howett, Carly; Kaiser, Ralf-Ingo; Linscott, Ivan; Lunsford, A. W.; Olkin, Catherine B.; Parker, Alex Harrison; Parker, Joel Wm.; Philippe, Sylvain; Protopapa, Silvia; Quirico, Eric; Reuter, D. C.; Schmitt, Bernard; Singer, Kelsi N.; Spencer, John R.; Stansberry, John A.; Stern, S. Alan; Tsang, Constantine; Verbiscer, Anne J.; Weaver, Harold A.; Weigle, G. E.; Young, Leslie

    2016-10-01

    Despite the migration of Pluto's volatile ices (N2, CO, and CH4) around the surface on seasonal timescales, the planet's non-volatile materials are not completely hidden from view. They occur in a variety of provinces formed over a wide range of timescales, including rugged mountains and chasms, the floors of mid-latitude craters, and an equatorial belt of especially dark and reddish material typified by the informally named Cthulhu Regio. NASA's New Horizons probe observed several of these regions at spatial resolutions as fine as 3 km/pixel with its LEISA imaging spectrometer, covering wavelengths from 1.25 to 2.5 microns. Various compounds that are much lighter than the tholin-like macromolecules responsible for the reddish coloration, but that are not volatile at Pluto surface temperatures such as methanol (CH3OH) and ethane (C2H6) have characteristic absorption bands within LEISA's wavelength range. This presentation will describe their geographic distributions and attempt to constrain their origins. Possibilities include an inheritance from Pluto's primordial composition (the likely source of H2O ice seen on Pluto's surface) or ongoing production from volatile precursors through photochemistry in Pluto's atmosphere or through radiolysis on Pluto's surface. New laboratory data inform the analysis.This work was supported by NASA's New Horizons project.

  19. Affixation and compounding in Hakka

    OpenAIRE

    Ungsitipoonporn, Siriopen

    2014-01-01

    This paper aims to present the internal structures of words in the Hakka language. Similar to other languages, affixation and compounding are outstanding in Hakka. In general, prefixes and suffixes are bound morphemes which do not occur independently, but in Hakka they sometimes appear as independent forms. Apart from single words, identifying compound words is of particular interest. Compound nouns can be made up of two or three words (characters) which ...

  20. Natural compounds with herbicidal activity

    Directory of Open Access Journals (Sweden)

    Mariano Fracchiolla

    2007-12-01

    Full Text Available Research about phytotoxic activity of natural compounds could lead both to find new herbicidal active ingredients and to plan environmental friendly weed control strategies. Particularly, living organisms could be a source of compounds that are impossible, for their complexity, to synthesize artificially. More over, they could have alternative sites of action respect to the known chemical herbicides and, due to their origin, they should be more environmental safe. Many living organism, such as bacteria, fungi, insects, lichens and plants, are able to produce bioactive compounds. They generally are secondary metabolites or simply waste molecules. In this paper we make a review about these compounds, highlighting potential and constraints.

  1. Natural compounds with herbicidal activity

    Directory of Open Access Journals (Sweden)

    Pasquale Montemurro

    2011-02-01

    Full Text Available Research about phytotoxic activity of natural compounds could lead both to find new herbicidal active ingredients and to plan environmental friendly weed control strategies. Particularly, living organisms could be a source of compounds that are impossible, for their complexity, to synthesize artificially. More over, they could have alternative sites of action respect to the known chemical herbicides and, due to their origin, they should be more environmental safe. Many living organism, such as bacteria, fungi, insects, lichens and plants, are able to produce bioactive compounds. They generally are secondary metabolites or simply waste molecules. In this paper we make a review about these compounds, highlighting potential and constraints.

  2. Antimicrobial compounds in tears.

    Science.gov (United States)

    McDermott, Alison M

    2013-12-01

    The tear film coats the cornea and conjunctiva and serves several important functions. It provides lubrication, prevents drying of the ocular surface epithelia, helps provide a smooth surface for refracting light, supplies oxygen and is an important component of the innate defense system of the eye providing protection against a range of potential pathogens. This review describes both classic antimicrobial compounds found in tears such as lysozyme and some more recently identified such as members of the cationic antimicrobial peptide family and surfactant protein-D as well as potential new candidate molecules that may contribute to antimicrobial protection. As is readily evident from the literature review herein, tears, like all mucosal fluids, contain a plethora of molecules with known antimicrobial effects. That all of these are active in vivo is debatable as many are present in low concentrations, may be influenced by other tear components such as the ionic environment, and antimicrobial action may be only one of several activities ascribed to the molecule. However, there are many studies showing synergistic/additive interactions between several of the tear antimicrobials and it is highly likely that cooperativity between molecules is the primary way tears are able to afford significant antimicrobial protection to the ocular surface in vivo. In addition to effects on pathogen growth and survival some tear components prevent epithelial cell invasion and promote the epithelial expression of innate defense molecules. Given the protective role of tears a number of scenarios can be envisaged that may affect the amount and/or activity of tear antimicrobials and hence compromise tear immunity. Two such situations, dry eye disease and contact lens wear, are discussed here. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. II-VI semiconductor compounds

    CERN Document Server

    1993-01-01

    For condensed matter physicists and electronic engineers, this volume deals with aspects of II-VI semiconductor compounds. Areas covered include devices and applications of II-VI compounds; Co-based II-IV semi-magnetic semiconductors; and electronic structure of strained II-VI superlattices.

  4. Compound-heterozygous Marfan syndrome

    NARCIS (Netherlands)

    van Dijk, F. S.; Hamel, B. C.; Hilhorst-Hofstee, Y.; Mulder, B. J. M.; Timmermans, J.; Pals, G.; Cobben, J. M.

    2009-01-01

    We report two families in which the probands have compound-heterozygous Marfan syndrome (MFS). The proband of family I has the R2726W FBN1 mutation associated with isolated skeletal features on one allele and a pathogenic FBN1 mutation on the other allele. The phenotype of the compound-heterozygous

  5. Radioactive decay and labeled compounds

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    This chapter on radioactive decay and labeled compounds has numerous intext equations and worked, sample problems. Topics covered include the following: terms and mathematics of radioactive decay; examples of calculations; graphs of decay equations; radioactivity or activity; activity measurements; activity decay; half-life determinations; labeled compounds. A 20 problem set is also included. 1 ref., 4 figs., 1 tab

  6. Radiolysis of other organic compounds

    International Nuclear Information System (INIS)

    Pikaev, A.K.

    1986-01-01

    Peculiarities of radiolysis of organic halogen, phosphorus, sulfur and nitrogen (including amines, amides, nitriles et al.) compounds in liquid phase are discussed. Intermediate and stable finish products of radiolysis of the given compounds, properties and radiochemical yields of these products are considered

  7. 2. Intermetallic compounds with lanthanides

    International Nuclear Information System (INIS)

    Elemans, J.B.A.A.

    1975-01-01

    Theoretical considerations are given concerning the structures of intermetallic compounds of the lanthanides and thorium (R) on the one hand, and with Fe, Co or Ni (M) on the other. They all derive from the parent composition RM 5 with the CaCu 5 hexagonal structure. This consists of alternate layers in which the M atoms are distinguished as M 1 and M 2 . The other compounds whose structures are studied are obtained by systematic replacement of R by M, or vice versa. In the first type, every third R is replaced by two M's yielding R 2 M 17 compounds. The substitution may be truly random or structured in two ways: so that either the hexagonal structure is maintained or that it is converted into a rhombihedral one. In the second type, one M (in a M 1 position) out of every five is replaced by one R, giving rise to RM 2 compounds which form Laves phases. In the third type, the M 1 's are replaced by R's, resulting in compounds RM 3 . In the fourth type, every third M is replaced by R, yielding R 2 M 7 compounds. With M = Co and R a light lanthanide, the compounds are ferromagnets; with R yttrium, thorium, or a heavy lanthanide, they are ferrimagnets. The preparation of the compounds in an arc-melting apparatus under an Ar-atmosphere followed by annealing is described

  8. Xenobiotic organic compounds in wastewater

    DEFF Research Database (Denmark)

    Eriksson, Eva; Baun, Anders; Henze, Mogens

    2002-01-01

    hundred of XOCs, among them mainly originating from hygiene products: chlorophenols, detergents and phthalates. Several compounds not deriving from hygiene products were also identified e.g. flame-retardants and drugs. A environmental hazard identification showed that a large number of compounds with high...

  9. Devices for collecting chemical compounds

    Science.gov (United States)

    Scott, Jill R; Groenewold, Gary S

    2013-12-24

    A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from a fixed surface so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

  10. Multi-angle compound imaging

    DEFF Research Database (Denmark)

    Jespersen, Søren Kragh; Wilhjelm, Jens Erik; Sillesen, Henrik

    1998-01-01

    This paper reports on a scanning technique, denoted multi-angle compound imaging (MACI), using spatial compounding. The MACI method also contains elements of frequency compounding, as the transmit frequency is lowered for the highest beam angles in order to reduce grating lobes. Compared to conve......This paper reports on a scanning technique, denoted multi-angle compound imaging (MACI), using spatial compounding. The MACI method also contains elements of frequency compounding, as the transmit frequency is lowered for the highest beam angles in order to reduce grating lobes. Compared...... to conventional B-mode imaging MACI offers better defined tissue boundaries and lower variance of the speckle pattern, resulting in an image with reduced random variations. Design and implementation of a compound imaging system is described, images of rubber tubes and porcine aorta are shown and effects...... on visualization are discussed. The speckle reduction is analyzed numerically and the results are found to be in excellent agreement with existing theory. An investigation of detectability of low-contrast lesions shows significant improvements compared to conventional imaging. Finally, possibilities for improving...

  11. EPR investigations on technetium compounds

    International Nuclear Information System (INIS)

    Abram, U.; Munze, R.; Kirmse, R.; Stach, J.

    1986-01-01

    Stimulated by the widespread use of the isotope /sup 99m/Tc in the field of nuclear medicine, there has been a substantial growth of interest in the chemistry of this man-made element. A particular need emerges for analytical methods allowing solution investigations of coordination compounds of technetium with low substance use. Considering these facts, Electron Paramagnetic Resonance Spectroscopy (EPR) appears to be a very suitable method because only very small amounts of the compounds are needed (lower than 1 mg). The resulting spectra give information regarding the valence state, symmetry and bonding properties of the compounds under study

  12. Improvement of the detection response time of gas sensors using the association of artificial neural networks with pattern recognition technique; Amelioration de la reponse temporelle de capteurs de gaz par reconnaissance de forme a l'aide de reseaux de neurones

    Energy Technology Data Exchange (ETDEWEB)

    Bordieu, Ch.; Rebiere, D. [Bordeaux-1 Univ., Lab. IXL, UMR CNRS 5818, 33 (France); Pistre, J.; Planata, R. [Centre d' Etudes du Bouchet, 91 - Vert-le-Petit (France)

    1999-07-01

    The association of artificial neural networks (multilayer perceptrons) with a real time pattern recognition technique (shifting windows) allowed the development of systems for the detection and the quantification of gases. Shifting window technique is presented and offers an interesting way to improve the detection response time. The partial detector characterization with regard to its parameters was realized. Applications dealing with the detection of gas compounds using surface acoustic sensors permit to show the shifting window technique feasibility. (author)

  13. Industrial uses of boron compounds

    Energy Technology Data Exchange (ETDEWEB)

    Pastor, H [Eurotungstene; Thevenot, F

    1978-06-01

    A review includes a section on the use in the chemical industry of some transition-metal borides as heterogeneous catalysts in the hydrogenation and dehydrogenation of organic compounds and in fuel cells.

  14. The demise of compound houses

    DEFF Research Database (Denmark)

    Andreasen, Jørgen; Eskemose Andersen, Jørgen

    2006-01-01

    of compound housing and analyses the advantages and disadvantages of life within such housing in Kumasi. Issues of privacy, image and communal life are usually cited by occupants dissatiesfied with life in compound houses, and the difficulty of extending them without spoiling the open spaces...... perceptions of what is acceptable urban life to the growing cohort of young African households. In addition, there is a need to explore innovative forms of tenure in order to secure the majority of Kumasi's population access to land for housing.......The compound house has long provided the accomodation required by low income households in West African cities. In Kumasi, Ghana, evidence suggests that no new compounds are being built. Instead, the city is being ringed by relatively affluent villa-style development while neighbourhoods dominated...

  15. Detection of chlorinated aromatic compounds

    Science.gov (United States)

    Ekechukwu, A.A.

    1996-02-06

    A method for making a composition for measuring the concentration of chlorinated aromatic compounds in aqueous fluids, and an optical probe for use with the method are disclosed. The composition comprises a hydrophobic polymer matrix, preferably polyamide, with a fluorescent indicator uniformly dispersed therein. The indicator fluoresces in the presence of the chlorinated aromatic compounds with an intensity dependent on the concentration of these compounds in the fluid of interest, such as 8-amino-2-naphthalene sulfonate. The probe includes a hollow cylindrical housing that contains the composition in its distal end. The probe admits an aqueous fluid to the probe interior for exposure to the composition. An optical fiber transmits excitation light from a remote source to the composition while the indicator reacts with chlorinated aromatic compounds present in the fluid. The resulting fluorescence light signal is reflected to a second optical fiber that transmits the light to a spectrophotometer for analysis. 5 figs.

  16. Third Symposium on Macrocyclic Compounds

    International Nuclear Information System (INIS)

    1979-01-01

    At the Third Symposium on Macrocyclic Compounds there were sessions on facilitated transport, analytical applications, organic synthesis and reactions, phase transfer catalysis, and metal complexation. Abstracts of the individual presentations are included

  17. Quality control of labelled compounds

    International Nuclear Information System (INIS)

    Matucha, M.

    1979-01-01

    Some advantages and disadvantages of methods used for quality control of organic labelled compounds (1 31 I, 14 C) are shortly discussed. The methods used are electrophoresis, ultraviolet and infrared spectrometry, radiogas and thin-layer chromatography. (author)

  18. Compound cueing in free recall

    Science.gov (United States)

    Lohnas, Lynn J.; Kahana, Michael J.

    2013-01-01

    According to the retrieved context theory of episodic memory, the cue for recall of an item is a weighted sum of recently activated cognitive states, including previously recalled and studied items as well as their associations. We show that this theory predicts there should be compound cueing in free recall. Specifically, the temporal contiguity effect should be greater when the two most recently recalled items were studied in contiguous list positions. A meta-analysis of published free recall experiments demonstrates evidence for compound cueing in both conditional response probabilities and inter-response times. To help rule out a rehearsal-based account of these compound cueing effects, we conducted an experiment with immediate, delayed and continual-distractor free recall conditions. Consistent with retrieved context theory but not with a rehearsal-based account, compound cueing was present in all conditions, and was not significantly influenced by the presence of interitem distractors. PMID:23957364

  19. Compound cuing in free recall.

    Science.gov (United States)

    Lohnas, Lynn J; Kahana, Michael J

    2014-01-01

    According to the retrieved context theory of episodic memory, the cue for recall of an item is a weighted sum of recently activated cognitive states, including previously recalled and studied items as well as their associations. We show that this theory predicts there should be compound cuing in free recall. Specifically, the temporal contiguity effect should be greater when the 2 most recently recalled items were studied in contiguous list positions. A meta-analysis of published free recall experiments demonstrates evidence for compound cuing in both conditional response probabilities and interresponse times. To help rule out a rehearsal-based account of these compound cuing effects, we conducted an experiment with immediate, delayed, and continual-distractor free recall conditions. Consistent with retrieved context theory but not with a rehearsal-based account, compound cuing was present in all conditions, and was not significantly influenced by the presence of interitem distractors.

  20. Crystallographic properties of fertilizer compounds

    Energy Technology Data Exchange (ETDEWEB)

    Frazier, A.W.; Dillard, E.F.; Thrasher, R.D.; Waerstad, K.R.; Hunter, S.R.; Kohler, J.J.; Scheib, R.M.

    1991-02-01

    This bulletin is a compilation of crystallographic data collected at NFERC on 450 fertilizer-related compounds. In TVA's fertilizer R and D program, petrographic examination, XRD, and infrared spectroscopy are combined with conventional chemical analysis methods in identifying the individual compounds that occur in fertilizer materials. This handbook brings together the results of these characterization studies and supplemental crystallographic data from the literature. It is in one-compound-per-page, loose-leaf format, ordered alphabetically by IUPAC name. Indexes provided include IUPAC name, formula, group, alternate formula, synonyms, x-ray data, optical data. Tables are given for solids, compounds in commercial MAP and DAP, and matrix materials in phosphate rock.

  1. Polishing compound for plastic surfaces

    Science.gov (United States)

    Stowell, M.S.

    1991-01-01

    This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

  2. Phenolic Compounds in Brassica Vegetables

    Directory of Open Access Journals (Sweden)

    Pablo Velasco

    2010-12-01

    Full Text Available Phenolic compounds are a large group of phytochemicals widespread in the plant kingdom. Depending on their structure they can be classified into simple phenols, phenolic acids, hydroxycinnamic acid derivatives and flavonoids. Phenolic compounds have received considerable attention for being potentially protective factors against cancer and heart diseases, in part because of their potent antioxidative properties and their ubiquity in a wide range of commonly consumed foods of plant origin. The Brassicaceae family includes a wide range of horticultural crops, some of them with economic significance and extensively used in the diet throughout the world. The phenolic composition of Brassica vegetables has been recently investigated and, nowadays, the profile of different Brassica species is well established. Here, we review the significance of phenolic compounds as a source of beneficial compounds for human health and the influence of environmental conditions and processing mechanisms on the phenolic composition of Brassica vegetables.

  3. Fourth symposium on macrocyclic compounds

    International Nuclear Information System (INIS)

    Christensen, J.J.; Izatt, R.M.

    1980-01-01

    Both theoretical and experimental aspects of the properties and behavior of synthetic and naturally occurring macrocyclic compounds are covered in this symposium. This document contains abstracts of the papers

  4. Radiation curable hydantoin diacrylate compounds

    International Nuclear Information System (INIS)

    Seltzer, R.; DiPrima, J.F.

    1979-01-01

    The diacrylate compounds are liquid at room temperature, easily processable as adhesives, casting and laminating resins and when cured possess excellent resistance to water. These compositions are easily cured exposure to ionizing radiations

  5. Inorganic, coordination and organometallic compounds

    International Nuclear Information System (INIS)

    Jursik, F.

    1978-01-01

    Separation of cations and anions of inorganic, coordination and metalloorganic compounds by the method of liquid column chromatography is considered. Common scheme of multicomponent cation mixture is suggesteed. Separation conditions, adsrbents, eluents, pH value solution concenstration, elution rate are also suggested. Separation of rare earth elements Cs, Be, Cd, Te, Th, U, Mo, Re, V, Ru, Zr, In compounds is considered as an example of liquid column chromatography application. Data on column chromatography application are summarized in a table

  6. Compound Odontoma in young girl

    Directory of Open Access Journals (Sweden)

    Nurwahida Nurwahida

    2017-08-01

    Full Text Available Introduction. Odontomas are the most common type of odontogenic tumors and generally they are asymptomatic. These tumors are formed from enamel and dentin, and can have variable amounts of cement and pulp tissues. According to radiographic, microscopic, and clinical features, two types of odontomas are recognized: Complex and compound odontomas. Complex odontomas occur mostly in the posterior part of the mandible and compound odontomas in the anterior maxilla. Case Report. A young girl patient, 9 years old came to Department of Oral and Maxillofacial Surgery with a slow growing and asymptomatic swelling in her left posterior mandible for 5 years in his history taking. The panoramic radiograph show  a radioopacity and radiolucent lesion at the lower second molar region, with well-corticated limits. An insisional biopsi   confirmed  as compound odontoma. The surgery  performed with simple enucleation and curettage under general anaesthesia. Discussion. Compound odontomas are usually located in the anterior maxilla, over the crowns of unerupted teeth, or between the roots of erupted teeth. In this case report, Compound odontomas are found in the posterior mandible. Conclusion. Compound odontomas in the posterior mandible is a rare. The treatment of odontomas depends on the size of the lesion. The early diagnosis, the treatment of choice is conservative surgical enucleation and curettage and prognosis is excellent.

  7. Problems related with the power regulation of reactors by physico-chemical methods, and the behaviour of water and heavy water in nuclear reactors; Comportement de l'eau et de l'eau lourde dans les reacteurs nucleaires et problemes de la regulation de puissance par voie physico-chimique

    Energy Technology Data Exchange (ETDEWEB)

    Dolle, L; Conan, D; Dirian, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Experience of the CEA heavy water reactors and a systematic study of the radiolytic decomposition of water in the core of swimming-pool reactors are described. Setting up of reactivity control by physico-chemical methods. Reactivity control by homogeneous poisoning of the reactor A comparison of the evolution of xenon poisoning with the residual anti reactivity of the poison in solution during its nuclear consumption establishes the programme which must govern the variation in its concentration if the exact compensation is to be produced The behaviour of the poison towards the reactor materials under the particular operational conditions must be taken into account. Radiolytic decomposition of water in the reactors in the presence of soluble poisons: A study of the effect of certain chemically inert salts, present in small concentrations in the water, on its radiolytic decomposition rate, has led to some new results which are discussed. The choice of a soluble poison is justified on the basis of the above results. Reactivity control by the use of a gaseous absorbent The use of a gas control rod circuit for compensation purposes, in place of solid control rods is described. The use of soluble poisons in the moderator to compensate the xenon effect, and of a gaseous absorbent in a circuit known as a gas control rod form original aspects of the reactivity control in the reactor EL 4. (authors) [French] L'observation du comportement de l'eau et de l'eau lourde dans les reacteurs en exploitation, contribue au fonctionnement sur de ceux-ci et oriente certaines etudes relatives aux techniques de controle de la reactivite par mise en oeuvre de poisons solubles. L'utilisation de poisons nucleaires dissous dans l'eau du reacteur entraine une pollution chimique de celle-ci. Les conditions d'emploi permettant d'eviter les effets indesirables de cette pollution sont etudiees. Les problemes analytiques - bien qu'importants - ne sont pas abordes dans le cadre de la communication

  8. Représentation chimique de la structure des kérogènes et des asphaltènes en fonction de leur origine et de leur degré d'évolution Chemical Modeling of the Structure of Kerogens and Asphaltenes As a Function of Their Origin and Evolution Stage

    Directory of Open Access Journals (Sweden)

    Behar F.

    2006-11-01

    Full Text Available Dans cet article nous proposons des modèles de structures chimiques de kérogènes et d'asphaltènes de roche. Nous avons choisi de représenter les kérogènes appartenant aux trois types classiques de matières organiques aux stades d'évolution suivants : - début de la diagenèse sensu-stricto; - début de la catagenèse (formation de l'huile; - fin de la catagenèse (formation du gaz. Les asphaltènes représentés correspondent à la phase de formation de l'huile. Nous avons tenu compte des données d'analyse obtenues sur des échantillons naturels : analyse élémentaire, microscopie électronique, RMN 13C, thermogravimétrie, analyse fonctionnelle, dégradation par pyrolyse. Afin d'obtenir une représentation chimique ayant une valeur statistique suffisante, nous avons choisi une masse moléculaire de 25 000 environ, identique pour les trois kérogènes au début de la diagenèse, et une masse de 8000 environ pour les asphaltènes associés. Nous avons ensuite dessiné à l'échelle moléculaire les structures correspondantes. This paper proposes models for the chemical structures of kerogens and asphaltenes from rocks. The kerogens belonging to the three conventional types of organic matter are represented in the following stages of evolution: (1 beginning of diagenesis sensu stricto,(2 beginning of catagenesis (formation of oil, and (3 end of catagenesis (formation of gas. The asphaltenes represented here correspond to the phase of oil formation. Models are based on analytical data obtained on natural samples, i. e. elemental analysis, electron microscopy, 13C NMR, thermogravimetry, functional analysis and pyrolysis. To get enough statistical value for the chemical modelling, a same molecular mass of about 25 000 was chosen for the three kerogens at the beginning of diagenesis. A molecular mass of about 8000 was chosen for the related asphaltenes. The chemical structures were then constructed at the molecular scale.

  9. Diazo compounds in the chemistry of fullerenes

    International Nuclear Information System (INIS)

    Tuktarov, Airat R; Dzhemilev, Usein M

    2010-01-01

    Experimental and theoretical data on the reactions of different diazo compounds (diazomethane, its derivatives, cyclic diazo compounds and diazocarbonyl compounds) with fullerenes are summarized. The structures and stereochemistry of cycloadducts formed in these reactions are considered.

  10. Diazo compounds in the chemistry of fullerenes

    Science.gov (United States)

    Tuktarov, Airat R.; Dzhemilev, Usein M.

    2010-09-01

    Experimental and theoretical data on the reactions of different diazo compounds (diazomethane, its derivatives, cyclic diazo compounds and diazocarbonyl compounds) with fullerenes are summarized. The structures and stereochemistry of cycloadducts formed in these reactions are considered.

  11. Diazo compounds in the chemistry of fullerenes

    Energy Technology Data Exchange (ETDEWEB)

    Tuktarov, Airat R; Dzhemilev, Usein M [Institute of Petrochemistry and Catalysis, Russian Academy of Sciences, Ufa (Russian Federation)

    2010-09-14

    Experimental and theoretical data on the reactions of different diazo compounds (diazomethane, its derivatives, cyclic diazo compounds and diazocarbonyl compounds) with fullerenes are summarized. The structures and stereochemistry of cycloadducts formed in these reactions are considered.

  12. Method for purifying bidentate organophosphorus compounds

    International Nuclear Information System (INIS)

    Schulz, W.W.

    1977-01-01

    Bidentate organophosphorus compounds useful for extracting actinide elements from acidic nuclear waste solutions are purified of undesirable acidic impurities by contacting the compounds with ethylene glycol which preferentially extracts the impurities found in technical grade bidentate compounds

  13. Extraterrestrial Organic Compounds in Meteorites

    Science.gov (United States)

    Botta, Oliver; Bada, Jeffrey L.; Meyer, Michael (Technical Monitor)

    2003-01-01

    Many organic compounds or their precursors found in meteorites originated in the interstellar or circumstellar medium and were later incorporated into planetesimals during the formation of the solar system. There they either survived intact or underwent further processing to synthesize secondary products on the meteorite parent body. The most distinct feature of CI and CM carbonaceous chondrites, two types of stony meteorites, is their high carbon content (up to 3% of weight), either in the form of carbonates or of organic compounds. The bulk of the organic carbon consists of an insoluble macromolecular material with a complex structure. Also present is a soluble organic fraction, which has been analyzed by several separation and analytical procedures. Low detection limits can be achieved by derivatization of the organic molecules with reagents that allow for analysis by gas chromatography/mass spectroscopy and high performance liquid chromatography. The CM meteorite Murchison has been found to contain more than 70 extraterrestrial amino acids and several other classes of compounds including carboxylic acids, hydroxy carboxylic acids, sulphonic and phosphonic acids, aliphatic, aromatic and polar hydrocarbons, fullerenes, heterocycles as well as carbonyl compounds, alcohols, amines and amides. The organic matter was found to be enriched in deuterium, and distinct organic compounds show isotopic enrichments of carbon and nitrogen relative to terrestrial matter.

  14. Vanadium Compounds as PTP Inhibitors

    Directory of Open Access Journals (Sweden)

    Elsa Irving

    2017-12-01

    Full Text Available Phosphotyrosine signaling is regulated by the opposing actions of protein tyrosine kinases (PTKs and protein tyrosine phosphatases (PTPs. Here we discuss the potential of vanadium derivatives as PTP enzyme inhibitors and metallotherapeutics. We describe how vanadate in the V oxidized state is thought to inhibit PTPs, thus acting as a pan-inhibitor of this enzyme superfamily. We discuss recent developments in the biological and biochemical actions of more complex vanadium derivatives, including decavanadate and in particular the growing number of oxidovanadium compounds with organic ligands. Pre-clinical studies involving these compounds are discussed in the anti-diabetic and anti-cancer contexts. Although in many cases PTP inhibition has been implicated, it is also clear that many such compounds have further biochemical effects in cells. There also remain concerns surrounding off-target toxicities and long-term use of vanadium compounds in vivo in humans, hindering their progress through clinical trials. Despite these current misgivings, interest in these chemicals continues and many believe they could still have therapeutic potential. If so, we argue that this field would benefit from greater focus on improving the delivery and tissue targeting of vanadium compounds in order to minimize off-target toxicities. This may then harness their full therapeutic potential.

  15. Vapor Pressure Data and Analysis for Selected Organophosphorus Compounds: DIBMP, DCMP, IMMP, IMPA, EMPA, and MPFA

    Science.gov (United States)

    2017-04-01

    methylphosphonique. Bulletin de la Societe Chimique de France 1962, 1645–1648. 34. Keay, L. The Preparation and Hydrolysis of Alkyl Hydrogen ...Properties of Phosphonic Anhydrides. I. Alkyl (or Aryl) Hydrogen Methylphosphonates. Journal of General Chemistry USSR (Zhurnal Obshchei Khimii) 1965, 35...4), 723–728. 32. Neimysheva, A.A.; Savchuk, V.I.; Knunyants, I.L. S-Alkyl Hydrogen Alkyl- and Aryl- Phosphonothioates and Their Derivatives. I

  16. The structures of binary compounds

    CERN Document Server

    Hafner, J; Jensen, WB; Majewski, JA; Mathis, K; Villars, P; Vogl, P; de Boer, FR

    1990-01-01

    - Up-to-date compilation of the experimental data on the structures of binary compounds by Villars and colleagues. - Coloured structure maps which order the compounds into their respective structural domains and present for the first time the local co-ordination polyhedra for the 150 most frequently occurring structure types, pedagogically very helpful and useful in the search for new materials with a required crystal structure. - Crystal co-ordination formulas: a flexible notation for the interpretation of solid-state structures by chemist Bill Jensen. - Recent important advances in unders

  17. Catalytic applications of niobium compounds

    International Nuclear Information System (INIS)

    Wright, C.J.; England, W.A.

    1984-01-01

    This article examines the potential uses of niobium, and its compounds, as catalysts in chemical processing. The word potential is deliberately chosen because in 1978 none of the world's twenty-five major catalysts (1) contained niobium. On the other hand, catalysts containing molybdenum and vanadium, neighbors of niobium in the periodic table, realized over 80 x 10 6 of sales in that same year. At the same time many of the patents for niobium catalysts cover applications in which niobium improves the activity of, or substitutes for, molybdenum based compounds. With favorable cost differentials and improvements in understanding, niobium may be able to replace molybdenum in some its traditional uses

  18. Cytotoxic Compounds from Aloe megalacantha

    Directory of Open Access Journals (Sweden)

    Negera Abdissa

    2017-07-01

    Full Text Available Phytochemical investigation of the ethyl acetate extract of the roots of Aloe megalacantha led to the isolation of four new natural products—1,8-dimethoxynepodinol (1, aloesaponarin III (2, 10-O-methylchrysalodin (3 and methyl-26-O-feruloyl-oxyhexacosanate (4—along with ten known compounds. All purified metabolites were characterized by NMR, mass spectrometric analyses and comparison with literature data. The isolates were evaluated for their cytotoxic activity against a human cervix carcinoma cell line KB-3-1 and some of them exhibited good activity, with aloesaponarin II (IC50 = 0.98 µM being the most active compound.

  19. Antiprotozoal compounds from Asparagus africanus

    DEFF Research Database (Denmark)

    Oketch-Rabah, H A; Dossaji, S F; Christensen, S B

    1997-01-01

    Two antiprotozoal compounds have been isolated from the roots of Asparagus africanus Lam. (Liliaceae), a new sapogenin, 2 beta, 12 alpha-dihydroxy-(25R)-spirosta-4,7-dien-3-one (1), which was named muzanzagenin, and the lignan (+)-nyasol (2), (Z)-(+)-4,4'-(3-ethenyl-1-propene-1,3-diyl)-bisphenol.......Two antiprotozoal compounds have been isolated from the roots of Asparagus africanus Lam. (Liliaceae), a new sapogenin, 2 beta, 12 alpha-dihydroxy-(25R)-spirosta-4,7-dien-3-one (1), which was named muzanzagenin, and the lignan (+)-nyasol (2), (Z)-(+)-4,4'-(3-ethenyl-1-propene-1,3-diyl...

  20. Compound

    Indian Academy of Sciences (India)

    Selen Bilgea,*, Zeynel Kılıça, Zeliha Hayvalıa, Tuncer Hökelekb and Serap Safranb. aDepartment of Chemistry, Faculty of Science, Ankara University, Tandoğan, Ankara 06100, Turkey. bDepartment of Physics, Hacettepe University, Beytepe, Ankara 06800, Turkey. e-mail: sbilge@science.ankara.edu.tr. Contents: Tables.

  1. Bacterial degradation of fluorinated compounds

    NARCIS (Netherlands)

    Ferreira, Maria Isabel Martins

    2007-01-01

    Fluorine was produced for the first time by Henri Moissan in 1886, for which he received the Nobel Prize in chemistry in 1906. The unique properties of fluorine have led to the development of fluorine chemistry and numerous synthetic fluorinated compounds have been prepared and tested for different

  2. Moessbauer spectroscopy in neptunium compounds

    Energy Technology Data Exchange (ETDEWEB)

    Nakamoto, Tadahiro; Nakada, Masami; Masaki, Nobuyuki; Saeki, Masakatsu [Japan Atomic Energy Research Inst., Tokyo (Japan)

    1997-03-01

    Moessbauer effects are observable in seven elements of actinides from {sup 232}Th to {sup 247}Cm and Moesbauer spectra have been investigated mainly with {sup 237}Np and {sup 238}U for the reasons of availability and cost of materials. This report describes the fundamental characteristics of Moessbauer spectra of {sup 237}Np and the correlation between the isomer shift and the coordination number of Np(V) compounds. The isomer shifts of Np(V) compounds had a tendency to increase as an increase of coordination number and the isomer shifts of Np(V) compounds showed broad distribution as well as those of Np(VI) but {delta} values of the compounds with the same coordination number were distributed in a narrow range. The {delta} values of Np(VI) complexes with O{sub x} donor set suggest that the Np atom in its hydroxide (NpO{sub 2}(OH){center_dot}4H{sub 2}O)might have pentagonal bipyramidal structure and at least, pentagonal and hexagonal bipyramidal structures might coexist in its acetate and benzoate. Really, such coexistence has been demonstrated in its nitrate, (NpO{sub 2}){sub 2}(NO{sub 3}){sub 2}{center_dot}5H{sub 2}O. (M.N.)

  3. Antifouling Compounds from Marine Macroalgae.

    Science.gov (United States)

    Dahms, Hans Uwe; Dobretsov, Sergey

    2017-08-28

    Marine macroalgae produce a wide variety of biologically-active metabolites that have been developed into commercial products, such as antibiotics, immunosuppressive, anti-inflammatory, cytotoxic agents, and cosmetic products. Many marine algae remain clean over longer periods of time, suggesting their strong antifouling potential. Isolation of biogenic compounds and the determination of their structure could provide leads for the development of environmentally-friendly antifouling paints. Isolated substances with potent antifouling activity belong to fatty acids, lipopeptides, amides, alkaloids, lactones, steroids, terpenoids, and pyrroles. It is unclear as yet to what extent symbiotic microorganisms are involved in the synthesis of these compounds. Algal secondary metabolites have the potential to be produced commercially using genetic and metabolic engineering techniques. This review provides an overview of publications from 2010 to February 2017 about antifouling activity of green, brown, and red algae. Some researchers were focusing on antifouling compounds of brown macroalgae, while metabolites of green algae received less attention. Several studies tested antifouling activity against bacteria, microalgae and invertebrates, but in only a few studies was the quorum sensing inhibitory activity of marine macroalgae tested. Rarely, antifouling compounds from macroalgae were isolated and tested in an ecologically-relevant way.

  4. Students' Categorizations of Organic Compounds

    Science.gov (United States)

    Domin, Daniel S.; Al-Masum, Mohammad; Mensah, John

    2008-01-01

    Categorization is a fundamental psychological ability necessary for problem solving and many other higher-level cognitive tasks. In organic chemistry, students must establish groupings of different chemical compounds in order not only to solve problems, but also to understand course content. Classic models of categorization emphasize similarity as…

  5. Compound Cuing in Free Recall

    Science.gov (United States)

    Lohnas, Lynn J.; Kahana, Michael J.

    2014-01-01

    According to the retrieved context theory of episodic memory, the cue for recall of an item is a weighted sum of recently activated cognitive states, including previously recalled and studied items as well as their associations. We show that this theory predicts there should be compound cuing in free recall. Specifically, the temporal contiguity…

  6. First flush of dissolved compounds

    DEFF Research Database (Denmark)

    Krebs, P.; Holzer, P.; Huisman, J.L.

    1999-01-01

    . It is known that since the wave celerity is higher than the flow velocity of the water, the increase of flow rate induced through rain runoff is recognised earlier at a certain downstream section of the combined sewer than the concentration increase of typical rain-water compounds originating from surface...

  7. Use of labeled compounds in tracer experiments

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The use of radiotracers in research has become common. This chapter looks at some of the underlying assumptions and advantages of labeled compounds: advantages of radiotracers; availability of suitable tracers and labeled compounds; purity of labeled compounds; autoradiolysis; storage of labeled compounds; detection systems for chromatography and electrophoretic methods. 14 refs., 2 figs

  8. Peroxide organometallic compounds and their transformations

    International Nuclear Information System (INIS)

    Razuvaev, G.A.; Brilkina, T.G.

    1976-01-01

    A survey is given experimental works on synthesis and reactions of peroxide organometallic compounds. Reactions have been considered of organometallic compounds with oxygen and organic peroxides which result in formation of both peroxide and non-peroxide products. Possible routes and mechanisms of chemical transformations of peroxide organometallic compounds have been discussed. Reactions of organometallic compounds with oxygen and peroxides have been considered

  9. Response of Bioluminescent Bacteria to Alkyltin Compounds.

    Science.gov (United States)

    1987-12-01

    found in the butyltiri series of compounds; tributyltin was (’Stimes more toxic than dibutyltin and (- 50 times more toxic than (mono)butyltin. When...correlations between compounds, tributyltin was -35 tine more Kicrotxit and fish bLoessays for pure toxic than dibutyltin end -750 times More compounds and...the compounds as a decrease in toxicity (5) tributyltin compounds ea -150 tines more and a method to study synergistic andtoxic than trinethyltia

  10. Bacterial Degradation of Aromatic Compounds

    Directory of Open Access Journals (Sweden)

    Qing X. Li

    2009-01-01

    Full Text Available Aromatic compounds are among the most prevalent and persistent pollutants in the environment. Petroleum-contaminated soil and sediment commonly contain a mixture of polycyclic aromatic hydrocarbons (PAHs and heterocyclic aromatics. Aromatics derived from industrial activities often have functional groups such as alkyls, halogens and nitro groups. Biodegradation is a major mechanism of removal of organic pollutants from a contaminated site. This review focuses on bacterial degradation pathways of selected aromatic compounds. Catabolic pathways of naphthalene, fluorene, phenanthrene, fluoranthene, pyrene, and benzo[a]pyrene are described in detail. Bacterial catabolism of the heterocycles dibenzofuran, carbazole, dibenzothiophene, and dibenzodioxin is discussed. Bacterial catabolism of alkylated PAHs is summarized, followed by a brief discussion of proteomics and metabolomics as powerful tools for elucidation of biodegradation mechanisms.

  11. Alkylation of organic aromatic compounds

    Science.gov (United States)

    Smith, Jr., Lawrence A.

    1989-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  12. Alkylation of organic aromatic compounds

    Science.gov (United States)

    Smith, L.A. Jr.

    1989-07-18

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  13. Determination of organic products resulting of chemical and radiochemical decompositions of bitumen. Applications to embedded bitumens; Determination des produits organiques d'alterations chimiques et radiochimiques du bitume. Applications aux enrobes bitumes

    Energy Technology Data Exchange (ETDEWEB)

    Walczak, I

    2000-01-27

    Bitumen can be used for embedding most of wastes because of its high impermeability and its relatively low reactivity with of chemicals. Bituminization is one of selected solutions in agreement with nuclear safety, waste compatibility and economic criteria. Bitumen, during storage, undergoes an auto-irradiation due to embedded radio-elements. During this stage,drums are not airtight then oxygen is present. In disposal configuration, water, which is a potential vector of radioactivity and organic matter, is an other hazard factor liable to deteriorate the containment characteristics of bitumen wastes. The generation of water-soluble organic complexing agents can affect the integrity of the wasteform due to an increase of the radionuclides solubility. The first aim of this work is the quantitative and qualitative characterisation of soluble organic matter in bitumen leachates. Different leaching solutions were tested (various pH, ionic strength, ratio S/V). When the pH of the leaching solutions increases, the total organic carbon released increases as well. Identified molecules are aromatics like naphthalene, oxidised compounds like alcohols, linear carbonyls, aromatics, glycols and nitrogen compounds. For the cement equilibrated solution (pH 13.5), the effect of ionic strength becomes significative and influences the release of soluble organic matter. This soluble organic matter can be bio-degraded if microorganisms can growth. The second aim of this work is to study the effect of radio-oxidative ageing on the bitumen confinement properties. During radio-oxidation, the chemical properties of bitumen are modified. The {mu}-IRTF analysis shows the formation of hydroxyl compounds and aromatic acids. The formation of these polar groups does not influence in our study the water uptake. However the organic matter release increases significantly with the irradiation dose. (author)

  14. Determination of organic products resulting of chemical and radiochemical decompositions of bitumen. Applications to embedded bitumens; Determination des produits organiques d'alterations chimiques et radiochimiques du bitume. Applications aux enrobes bitumes

    Energy Technology Data Exchange (ETDEWEB)

    Walczak, I

    2000-01-27

    Bitumen can be used for embedding most of wastes because of its high impermeability and its relatively low reactivity with of chemicals. Bituminization is one of selected solutions in agreement with nuclear safety, waste compatibility and economic criteria. Bitumen, during storage, undergoes an auto-irradiation due to embedded radio-elements. During this stage,drums are not airtight then oxygen is present. In disposal configuration, water, which is a potential vector of radioactivity and organic matter, is an other hazard factor liable to deteriorate the containment characteristics of bitumen wastes. The generation of water-soluble organic complexing agents can affect the integrity of the wasteform due to an increase of the radionuclides solubility. The first aim of this work is the quantitative and qualitative characterisation of soluble organic matter in bitumen leachates. Different leaching solutions were tested (various pH, ionic strength, ratio S/V). When the pH of the leaching solutions increases, the total organic carbon released increases as well. Identified molecules are aromatics like naphthalene, oxidised compounds like alcohols, linear carbonyls, aromatics, glycols and nitrogen compounds. For the cement equilibrated solution (pH 13.5), the effect of ionic strength becomes significative and influences the release of soluble organic matter. This soluble organic matter can be bio-degraded if microorganisms can growth. The second aim of this work is to study the effect of radio-oxidative ageing on the bitumen confinement properties. During radio-oxidation, the chemical properties of bitumen are modified. The {mu}-IRTF analysis shows the formation of hydroxyl compounds and aromatic acids. The formation of these polar groups does not influence in our study the water uptake. However the organic matter release increases significantly with the irradiation dose. (author)

  15. The Electrochemistry of Organophosphorus Compounds.

    Science.gov (United States)

    1988-01-20

    of hydrogen on the electrode surface. Mechanistkc views are further developed with the addition of water resulting in the formation of...the exclusive vlide product. Furthermore, carbonvl compounds were added to the electrolyses to react with the electrochemically-generated ylides via...the Wittig reaction. The resulting olefins were found to catalytically isomerize from the Z isomer to the E isomer upon reduction. The role of water

  16. Compound semiconductor optical waveguide switch

    Science.gov (United States)

    Spahn, Olga B.; Sullivan, Charles T.; Garcia, Ernest J.

    2003-06-10

    An optical waveguide switch is disclosed which is formed from III-V compound semiconductors and which has a moveable optical waveguide with a cantilevered portion that can be bent laterally by an integral electrostatic actuator to route an optical signal (i.e. light) between the moveable optical waveguide and one of a plurality of fixed optical waveguides. A plurality of optical waveguide switches can be formed on a common substrate and interconnected to form an optical switching network.

  17. A bitumen compound for pavements

    Energy Technology Data Exchange (ETDEWEB)

    Kanadzava, K.; Simagata, R.

    1982-08-17

    A bitumen compound is proposed which is produced through addition of finely ground coal ash to a bituminous material and subsequent homogenization of the mixture. The following may be used as the bituminous material: solid petroleum bitumen (a penetration of 10 to 150), soft petroleum bitumen (a penetration of 150 to 500), a semioxidized bitumen, a mixture of semioxidized and directly distilled bitumen, bitumen diluted by a petroleum distillate, bituminous mixtures which include rubber, tar, synthetic resins and so on. It is best to use wastes from central thermal electric power plants (TETs), which operate on coal, with a great content of oxides of aluminum, iron and calcium, as the coal ash. The ash is added to the bitumen in a volume of 10 to 40 percent. The compound may include a surfactant (PAV), dispersers, additives which increase the stability to layering and others. The compound is marked by increased resistance to softening in the summer, reduced brittleness at low temperatures and good adhesion to a filler.

  18. Polyfluoroalkyl compounds in landfill leachates

    International Nuclear Information System (INIS)

    Busch, Jan; Ahrens, Lutz; Sturm, Renate; Ebinghaus, Ralf

    2010-01-01

    Polyfluoroalkyl compounds (PFCs) are widely used in industry and consumer products. These products could end up finally in landfills where their leachates are a potential source for PFCs into the aqueous environment. In this study, samples of untreated and treated leachate from 22 landfill sites in Germany were analysed for 43 PFCs. ΣPFC concentrations ranged from 31 to 12,819 ng/L in untreated leachate and 4-8060 ng/L in treated leachate. The dominating compounds in untreated leachate were perfluorobutanoic acid (PFBA) (mean contribution 27%) and perfluorobutane sulfonate (PFBS) (24%). The discharge of PFCs into the aqueous environment depended on the cleaning treatment systems. Membrane treatments (reverse osmosis and nanofiltrations) and activated carbon released lower concentrations of PFCs into the environment than cleaning systems using wet air oxidation or only biological treatment. The mass flows of ΣPFCs into the aqueous environment ranged between 0.08 and 956 mg/day. - The first comprehensive survey of polyfluoroalkyl compounds (PFCs) in landfill leachates.

  19. Studying the propensity of compounds to supersaturate

    DEFF Research Database (Denmark)

    Palmelund, Henrik; Madsen, Cecilie Maria; Christensen, Jakob Plum

    2016-01-01

    Supersaturating drug delivery systems can enhance the oral bioavailability of poorly soluble drug compounds. Supersaturation of such compounds has been studied in many different ways; however, a more standardized method is required. The rationale of choosing suitable concentrations of supersatura......Supersaturating drug delivery systems can enhance the oral bioavailability of poorly soluble drug compounds. Supersaturation of such compounds has been studied in many different ways; however, a more standardized method is required. The rationale of choosing suitable concentrations...... of supersaturation to study has previously been very inconsistent. This makes comparisons between studies and compounds difficult, as the propensity of compounds to supersaturate varies greatly. This study presents a standardized method to study the supersaturation of drug compounds. The method allows, both......, for a ranking of compounds according to their supersaturation propensity and the effectiveness of precipitation inhibitors. The time-concentration profile of supersaturation and precipitation was studied in situ for 4 different concentrations for 6 model compounds (albendazole, aprepitant, danazol, felodipine...

  20. Investigations on organogermanium compounds XII. Reactions of trialkylgermylalkalimetal compounds in hexamethylphosphoric triamide (HMPT) with some inorganic and organic compounds

    NARCIS (Netherlands)

    Bulten, E.J.; Noltes, J.G.

    1971-01-01

    Trialkylgermyl alkali metal compounds in HMPT have been found to be highly reactive nucleophiles. Reactions with some inorganic and organic compounds, such as oxygen, carbon dioxide, inorganic and orgaanic halides, aldehydes, ketones, epoxides and lactones are described. Several new

  1. Volatile flavor compounds in yogurt: a review.

    Science.gov (United States)

    Cheng, Hefa

    2010-11-01

    Considerable knowledge has been accumulated on the volatile compounds contributing to the aroma and flavor of yogurt. This review outlines the production of the major flavor compounds in yogurt fermentation and the analysis techniques, both instrumental and sensory, for quantifying the volatile compounds in yogurt. The volatile compounds that have been identified in plain yogurt are summarized, with the few key aroma compounds described in detail. Most flavor compounds in yogurt are produced from lipolysis of milkfat and microbiological transformations of lactose and citrate. More than 100 volatiles, including carbonyl compounds, alcohols, acids, esters, hydrocarbons, aromatic compounds, sulfur-containing compounds, and heterocyclic compounds, are found in yogurt at low to trace concentrations. Besides lactic acid, acetaldehyde, diacetyl, acetoin, acetone, and 2-butanone contribute most to the typical aroma and flavor of yogurt. Extended storage of yogurt causes off-flavor development, which is mainly attributed to the production of undesired aldehydes and fatty acids during lipid oxidation. Further work on studying the volatile flavor compounds-matrix interactions, flavor release mechanisms, and the synergistic effect of flavor compounds, and on correlating the sensory properties of yogurt with the compositions of volatile flavor compounds are needed to fully elucidate yogurt aroma and flavor.

  2. Nitrogen Compounds in Radiation Chemistry

    International Nuclear Information System (INIS)

    Sims, H.E.; Dey, G.R.; Vaudey, C.E.; Peaucelle, C.; Boucher, J.L.; Toulhoat, N.; Bererd, N.; Koppenol, W.H.; Janata, E.; Dauvois, V.; Durand, D.; Legand, S.; Roujou, J.L.; Doizi, D.; Dannoux, A.; Lamouroux, C.

    2009-01-01

    Water radiolysis in presence of N 2 is probably the topic the most controversy in the field of water radiolysis. It still exists a strong discrepancy between the different reports of ammonia formation by water radiolysis in presence of N 2 and moreover in absence of oxygen there is no agreement on the formation or not of nitrogen oxide like NO 2 - and NO 3 -. These discrepancies come from multiple sources: - the complexity of the reaction mechanisms where nitrogen is involved - the experimental difficulties - and, the irradiation conditions. The aim of the workshop is to capitalize the knowledge needed to go further in simulations and understanding the problems caused (or not) by the presence of nitrogen / water in the environment of radioactive materials. Implications are evident in terms of corrosion, understanding of biological systems and atmospheric chemistry under radiation. Topics covered include experimental and theoretical approaches, application and fundamental researches: - Nitrate and Ammonia in radiation chemistry in nuclear cycle; - NOx in biological systems and atmospheric chemistry; - Formation of Nitrogen compounds in Nuclear installations; - Nitrogen in future power plant projects (Gen4, ITER...) and large particle accelerators. This document gathers the transparencies available for 7 of the presentations given at this workshop. These are: - H.E SIMS: 'Radiation Chemistry of Nitrogen Compounds in Nuclear Power Plant'; - G.R. DEY: 'Nitrogen Compounds Formation in the Radiolysis of Aqueous Solutions'; - C.E. VAUDEY et al.: 'Radiolytic corrosion of nuclear graphite studied with the dedicated gas irradiation cell of IPNL'; - J.L. BOUCHER: 'Roles and biosynthesis of NO in eukaryotes and prokaryotes'; - W.H. KOPPENOL: 'Chemistry of NOx'; - E. JANATA: 'Yield of OH in N 2 O saturated aqueous solution'; - V. DAUVOIS: 'Analytical strategy for the study of radiolysis gases'

  3. DNA modification by alkylating compounds

    Energy Technology Data Exchange (ETDEWEB)

    Kruglyakova, E.E.

    1985-09-01

    Results are given for research on the physico-chemical properties of alkylating compounds - nitroso alkyl ureas (NAU) which possess a broad spectrum of biological activity, such as mutagenic, carcinogenic, and anti-tumor action that is due to the alkylation and carbamoylation of DNA as well as other cellular components. Identified chemical products of NAU interaction with DNA and its components are cited. Structural conversions of a DNA macromolecule resulting from its chemical modification are examined. NAU are used to discuss possible biological consequences of DNA modification. 148 references.

  4. Unpacking Noun-Noun Compounds

    DEFF Research Database (Denmark)

    Smith, Viktor; Barratt, Daniel; Zlatev, Jordan

    2014-01-01

    In two complementary experiments we took an integrated approach to a set of tightly interwoven, yet rarely combined questions concerning the spontaneous interpretation of novel (unfamiliar) noun-noun compounds (NNCs) when encountered in isolation, and possible (re)interpretations of novel as well...... concerning the relations between semantics and pragmatics, as well as system and usage, and psycholinguistic issues concerning the processing of NNCs. New insights and methodological tools are also provided for supporting future best practices in the field of food naming and labelling...

  5. Raman spectra of lithium compounds

    Science.gov (United States)

    Gorelik, V. S.; Bi, Dongxue; Voinov, Y. P.; Vodchits, A. I.; Gorshunov, B. P.; Yurasov, N. I.; Yurasova, I. I.

    2017-11-01

    The paper is devoted to the results of investigating the spontaneous Raman scattering spectra in the lithium compounds crystals in a wide spectral range by the fibre-optic spectroscopy method. We also present the stimulated Raman scattering spectra in the lithium hydroxide and lithium deuteride crystals obtained with the use of powerful laser source. The symmetry properties of the lithium hydroxide, lithium hydroxide monohydrate and lithium deuteride crystals optical modes were analyzed by means of the irreducible representations of the point symmetry groups. We have established the selection rules in the Raman and infrared absorption spectra of LiOH, LiOH·H2O and LiD crystals.

  6. Selenium-containing indolyl compounds

    DEFF Research Database (Denmark)

    Casaril, Angela M; Ignasiak, Marta T; Chuang, Christine Y

    2017-01-01

    materials, including extracellular matrix (ECM) proteins, within the artery wall. Here we investigated the potential of selenium-containing indoles to afford protection against these oxidants, by determining rate constants (k) for their reaction, and quantifying the extent of damage on isolated ECM proteins......Tyr on HCAEC-ECM were also reduced. These data demonstrate that the novel selenium-containing compounds show high reactivity with oxidants and may modulate oxidative and nitrosative damage at sites of inflammation, contributing to a reduction in tissue dysfunction and atherogenesis....

  7. Benzimidazoles: A biologically active compounds

    Directory of Open Access Journals (Sweden)

    Salahuddin

    2017-02-01

    Full Text Available Synthesis of commercially available benzimidazole involves condensation of o-phenylenediamine with formic acid. The most prominent benzimidazole compound in nature is N-riosyldimethylbenzimidazole, which serves as a axial ligand for cobalt in vitamin B12. The benzimidazole and its derivatives play a very important role as a therapeutic agent e.g. antiulcer and anthelmintic drugs. Apart from this the benzimidazole derivatives exhibit pharmacological activities such as antimicrobial, antiviral, anticancer, anti-inflammatory, analgesic, etc. The substituted benzimidazoles are summarized in this review to know about the chemistry as well as pharmacological activities.

  8. Characterisation of selected volatile organic compounds in ...

    African Journals Online (AJOL)

    GCMS), was used to identify volatile compounds at three different temperatures. Fifty volatile compounds, inclusive of 14 acids, 14 alcohols, and 22 esters were identified and quantified in the two brands of indigenous banana beer samples. Only 12 ...

  9. Genetic effects of organic mercury compounds

    Energy Technology Data Exchange (ETDEWEB)

    Ramel, C

    1967-01-01

    Studies on the genetic and developmental effects of organic mercury compounds on lilies, drosophila, and ice were carried out. It was found that chromosomal and developmental abnormalities were correlated with the administration of mercury compounds.

  10. Butyl Rubber: Compound Development and Characterization

    National Research Council Canada - National Science Library

    Sloan, James

    2000-01-01

    ...), to develop the standard butyl rubber compound. The strategy of this work was to compound- and compression-mold high-quality, uniform butyl rubber experimental sheets and to evaluate their cure properties, mechanical properties...

  11. Potent antifouling compounds produced by marine Streptomyces

    KAUST Repository

    Xu, Ying; He, Hongping; Schulz, Stefan; Liu, Xin; Fusetani, Nobushino; Xiong, Hairong; Xiao, Xiang; Qian, Peiyuan

    2010-01-01

    of a marine Streptomyces strain obtained from deep-sea sediments. Antifouling activities of these five compounds and four other structurally-related compounds isolated from a North Sea Streptomyces strain against major fouling organisms were compared

  12. Aroma compounds in fresh cut pomegranate arils.

    Science.gov (United States)

    Little published information exists regarding flavor and aroma compounds in pomegranate (Punica granatum). Although arils have fruity and sweet characteristics, we found no publications describing actual compounds responsible for their typical flavor. Since most commercial usage of pomegranates in...

  13. Etude des caractéristiques physico-chimiques de certains plats traditionnels dérivés du manioc (foutou, plaçait et kokondé

    Directory of Open Access Journals (Sweden)

    Zoumenou, V.

    1999-01-01

    Full Text Available Physical-Chemical Characteristics of some Cassava Traditional Meals (foutou, placali and kokonde. Foutou, placali and kokonde are cassava foods widely consumed in Ivory Coast. During foods processing many technological treatements (grinding, drying and cooking affect the cyanogenetic glucosides content and the chemical composition of cassava tubers. These treatements reduced cyanogenetic material from 9 mg/100 g to 3 or 0, 4 mg/100g. The fermentation process increases the protein value. Cassava tubers are rich in starch and after processing it varied from 90 % to 65 %. They contain various minerals calcium, phosphorus and potassium and organic compounds. The three foods (Foutou, Placali and Kokonde have not the same viscosity according to the cassava variety used in this processing. The viscosity determination therefore allowed to choose the cassava variety for each preparation.

  14. Effect of Ash on Oxygen Carriers for the Application of Chemical Looping Combustion to a High Carbon Char Effet des cendres sur l’activité des porteurs d’oxygène dans la combustion du charbon en boucle chimique

    Directory of Open Access Journals (Sweden)

    Rubel A.

    2011-02-01

    activity of the OCs and both OCs performed well. The results were promising for the application of CLC directly to solid fuels. L’application de la combustion en boucle chimique (CLC aux combustibles solides est actuellement étudiée à l’Université du Kentucky, au Centre de Recherche de l’Energie Appliquée (CAER dans le but de développer un procédé de gazéification/combustion en boucle chimique pressurisé (PCLC/G afin de générer de l’électricité à partir de charbon. Un des principaux aspects de la combustion en boucle chimique de combustibles solides est la compréhension de l’effet des cendres sur la réactivité des porteurs d’oxygène (OCs. L’effet des cendres sur la capacité de transfert d’oxygène et sur l’aptitude à oxyder le charbon est étudié avec deux porteurs d’oxygène à base d’oxydes de fer. Les cendres utilisées sont des cendres volantes provenant d’une centrale thermique au charbon. Les expériences sont réalisées dans un système composé d’une thermo-balance couplée à un spectrographe de masse (TGMS dans lequel on utilise d’abord 500 mg d’un mélange de cendres/porteurs d’oxygène à différentes concentrations de cendres allant jusqu’à 75 %. Le gaz réducteur est composé de 10 % de H2, 15 % de CO, 20 % de CO2 et de 55 % de Ar; et le gaz oxydant est composé de 20 % de O2 dans Ar. Les réactions d’oxydation/réduction sont quasi totales. D’après ces expériences, les cendres ont une activité propre de porteur d’oxygène, liée à la présence de fer dans les cendres, confirmée par les analyses DRX. Cela génère une augmentation du gain ou de la perte de masse du mélange pendant l’oxydation/réduction. Les vitesses d’oxydation/réduction augmentent avec la concentration des cendres à cause de l’augmentation de la porosité du mélange de porteurs d’oxygène avec les cendres, ce qui permet un meilleur accès des gaz réactifs sur les sites actifs des porteurs d’oxygène. Dans un

  15. Two new acetylenic compounds from Asparagus officinalis.

    Science.gov (United States)

    Li, Xue-Mei; Cai, Jin-Long; Wang, Wen-Xiang; Ai, Hong-Lian; Mao, Zi-Chao

    2016-01-01

    Two new acetylenic compounds, asparoffins A (1) and B (2), together with two known compounds, nyasol (3) and 3″-methoxynyasol (4), were isolated from stems of Asparagus officinalis. The structures of two new compounds were elucidated on the basis of detailed spectroscopic analyses (UV, IR, MS, 1D, and 2D NMR). All compounds were evaluated for their cytotoxicities against three human cancer cell lines.

  16. Semiconducting compounds and devices incorporating same

    Science.gov (United States)

    Marks, Tobin J.; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

    2016-01-19

    Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

  17. Separation of compounds differing in isotopic composition

    International Nuclear Information System (INIS)

    Sievers, R.E.; Brooks, J.J.

    1976-01-01

    Compounds differing in isotopic composition are separated by introducing a mixture of the compounds into a chromatographic column containing a lanthanide chelate as a stationary phase and eluting from the column a fraction which is at least enriched with one of the compounds of the mixture. 17 claims, no drawings

  18. Separation of compounds differing in isotopic composition

    International Nuclear Information System (INIS)

    Sievers, R.E.; Brooks, J.J.

    1975-01-01

    Compounds differing in isotopic composition are separated by introducing a mixture of the compounds into a chromatographic column containing a lanthanide chelate as a stationary phase and eluting from the column a fraction that is at least enriched with one of the compounds of the mixture. (U.S.)

  19. Thin films of mixed metal compounds

    Science.gov (United States)

    Mickelsen, Reid A.; Chen, Wen S.

    1985-01-01

    A compositionally uniform thin film of a mixed metal compound is formed by simultaneously evaporating a first metal compound and a second metal compound from independent sources. The mean free path between the vapor particles is reduced by a gas and the mixed vapors are deposited uniformly. The invention finds particular utility in forming thin film heterojunction solar cells.

  20. Chemical interactions between the metallic silver aerosols and the iodide compounds in the containment building of a PWR reactor during a serious accident; Interactions chimiques entre les aerosols d'argent metallique et les composes iodes dans l'enceinte de confinement d'un reacteur nucleaire a eau pressurisee en cas d'accident grave

    Energy Technology Data Exchange (ETDEWEB)

    Serra, D.; Saint-Raymond, O.; Zoulalian, A. [Universite Henri Poincare, LERMAB-ENSTIB, 54 - Vandoeuvre-les-Nancy (France); Montanelli, T. [CEA/Cadarache, Inst. de Protection et de Surete Nucleaire, IPSN/DRS/SESHP/LEATS, 13 - Saint-Paul-lez-Durance (France)

    2000-07-01

    During an hypothetical severe accident in a PWR, the iodide fission products can be transferred into the liquid phase of the containment with silver particles (or silver colloid) resulting from the fusion and the vaporization of neutronic control rods. The chemical interactions between the iodide ions and the molecular iodine with the silver particles are studied in an aqueous phase separately and without radiation. The interaction between the iodide ions and silver particles requires a preliminary oxidation step of the silver particles the rate of which depends on the pH, the temperature and the liquid oxygen concentration. A kinetic model including two independent stoichiometries allows to represent correctly the whole experimental runs. At pH = 3, the chemical interactions between molecular iodine and silver particles do not require an oxidation step and a second order kinetic model is able to represent the experimental results considering the operating conditions studied. (authors)

  1. Superconductivity in graphite intercalation compounds

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Robert P. [Cavendish Laboratory, University of Cambridge, Madingley Road, Cambridge CB3 0HE (United Kingdom); Weller, Thomas E.; Howard, Christopher A. [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom); Dean, Mark P.M. [Department of Condensed Matter Physics and Materials Science, Brookhaven National Laboratory, Upton, NY 11973 (United States); Rahnejat, Kaveh C. [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom); Saxena, Siddharth S. [Cavendish Laboratory, University of Cambridge, Madingley Road, Cambridge CB3 0HE (United Kingdom); Ellerby, Mark, E-mail: mark.ellerby@ucl.ac.uk [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom)

    2015-07-15

    Highlights: • Historical background of graphite intercalates. • Superconductivity in graphite intercalates and its place in the field of superconductivity. • Recent developments. • Relevant modeling of superconductivity in graphite intercalates. • Interpretations that pertain and questions that remain. - Abstract: The field of superconductivity in the class of materials known as graphite intercalation compounds has a history dating back to the 1960s (Dresselhaus and Dresselhaus, 1981; Enoki et al., 2003). This paper recontextualizes the field in light of the discovery of superconductivity in CaC{sub 6} and YbC{sub 6} in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how these relate to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic states and phonon modes are most important for superconductivity, and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition.

  2. Superconductivity in graphite intercalation compounds

    International Nuclear Information System (INIS)

    Smith, Robert P.; Weller, Thomas E.; Howard, Christopher A.; Dean, Mark P.M.; Rahnejat, Kaveh C.; Saxena, Siddharth S.; Ellerby, Mark

    2015-01-01

    Highlights: • Historical background of graphite intercalates. • Superconductivity in graphite intercalates and its place in the field of superconductivity. • Recent developments. • Relevant modeling of superconductivity in graphite intercalates. • Interpretations that pertain and questions that remain. - Abstract: The field of superconductivity in the class of materials known as graphite intercalation compounds has a history dating back to the 1960s (Dresselhaus and Dresselhaus, 1981; Enoki et al., 2003). This paper recontextualizes the field in light of the discovery of superconductivity in CaC 6 and YbC 6 in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how these relate to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic states and phonon modes are most important for superconductivity, and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition

  3. Antimicrobial compounds of porcine mucosa

    Science.gov (United States)

    Kotenkova, E. A.; Lukinova, E. A.; Fedulova, L. V.

    2017-09-01

    The aim of the study was to investigate porcine oral cavity mucosa (OCM), nasal cavity mucosa (NCM), rectal mucosa (RM) and tongue mucosa (TM) as sources of antimicrobial compounds. Ultrafiltrates with MW >30 kDa, MW 5-30 kDa and MW 30 kDa, the zone of microbial growth inhibition was 7.5 mm, for the MW<5 kDa fraction, it was 7 mm, and for MW 5-30 kDa fraction, it was 4.5 mm. No significant differences were found in high molecular weight proteomic profile, while qualitative and quantitative differences were observed in the medium and low molecular weight areas, especially in OCM and NCM. HPLC showed 221 tissue-specific peptides in OCM, 156 in NCM, 225 in RM, but only 5 in TM. The results observed confirmed porcine mucous tissues as a good source of antimicrobial compounds, which could be an actual alternative for reduction of microbial spoilage of foods.

  4. Antioxidant Phenolic Compounds from Pu-erh Tea

    Directory of Open Access Journals (Sweden)

    Shu Shan Du

    2012-11-01

    Full Text Available Eight compounds were isolated from the water extract of Pu-erh tea and their structures were elucidated by NMR and MS as gallic acid (1, (+-catechin (2, (−-epicatechin (3, (−-epicatechin-3-O-gallate (4, (−-epigallocatechin-3-O-gallate (5, (−-epiafzelechin- 3-O-gallate (6, kaempferol (7, and quercetin (8. Their in vitro antioxidant activities were assessed by the DPPH and ABTS scavenging methods with microplate assays. The relative order of DPPH scavenging capacity for these compounds was compound 8 > compound 7 > compound 1 > compound 6 > compound 4 ≈ compound 5 > compound 2 > VC (reference > compound 3, and that of ABTS scavenging capacity was compound 1 > compound 2 > compound 7 ≈ compound 8 > compound 6 > compound 5 > compound 4 > VC (reference > compound 3. The results showed that these phenolic compounds contributed to the antioxidant activity of Pu-erh tea.

  5. Bioavailability of dietary phenolic compounds: Review

    Directory of Open Access Journals (Sweden)

    Erick Gutiérrez-Grijalva Paul Gutiérrez-Grijalva

    2015-12-01

    Full Text Available Phenolic compounds are ubiquitous in plant-based foods. High dietary intake of fruits, vegetables and cereals is related to a decreased rate in chronic diseases. Phenolic compounds are thought to be responsible, at least in part, for those health effects. Nonetheless, phenolic compounds bioaccessibility and biotransformation is often not considered in these studies; thus, a precise mechanism of action of phenolic compounds is not known. In this review we aim to present a comprehensive knowledge of the metabolic processes through which phenolic compounds go after intake.

  6. The formation of lithium diarylargentates from arylsilver compounds and the corresponding aryllithium compounds

    NARCIS (Netherlands)

    Blenkers, J.; Hofstee, H.K.; Boersma, J.; Kerk, G.J.M. van der

    1979-01-01

    Diarylsilverlithium compounds of the type Ar2AgLi are formed by treating arylsilver compounds with the corresponding aryllithium compounds. Cryoscopy in benzene shows that the Ar2AgLi compounds are associated into dimers. NMR spectroscopic data indicate that only one type of aryl group is present in

  7. Diffusion mechanisms in intermetallic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Larikov, L N [ANU, Inst. Metallofiziki, Kiev (Ukraine)

    1992-08-01

    Recent research aimed at the identification of the principal mechanisms of diffusion in intermetallics is reviewed. In particular, attention is given to the effect of the type of interatomic bond on the contribution of different mechanisms to diffusion in ordered metallic compounds. Results of an analysis of experimental determinations of diffusion coefficients D(A) and D(B) in binary intermetallics (CuZn, Cu3Sn, AuCd, AgZn, AgMg, InSb, GaSb, AlSb, Fe3Al, FeAl, FeAl3, Ni3Al, Ni3Nb, FeSn, FeSn2, Ni3Sn2, Ni3Sn4, Co3Sn2, CoSn, CoSn2, and CoGa) are presented, and it is shown that the D(A)/D(B) ratio differs substantially for different diffusion mechanisms. 60 refs.

  8. Antimicrobial compounds from Alpinia conchigera.

    Science.gov (United States)

    Aziz, Ahmad Nazif; Ibrahim, Halijah; Rosmy Syamsir, Devi; Mohtar, Mastura; Vejayan, Jaya; Awang, Khalijah

    2013-02-13

    The rhizome of Alpinia conchigerahas been used as a condiment in the northern states of Peninsular Malaysia and occasionally in folk medicine in the east coast to treat fungal infections. In some states of Peninsular Malaysia, the rhizomes are consumed as a post-partum medicine and the young shoots are prepared into a vegetable dish. This study aimed to investigate the chemical constituents of the pseudostems and rhizomes of Malaysian Alpinia conchigera and to evaluate the antimicrobial activity of the dichloromethane (DCM) extracts of the pseudostems, rhizomes and the isolated compounds against three selected fungi and five strains of Staphylococcus aureus. The dried and ground pseudostems (0.8kg) and rhizomes (1.0kg) were successively extracted in Soxhlet extractor using n-hexane, dichloromethane (DCM) and methanol. The n-hexane and DCM extracts of the pseudostem and rhizome were subjected to isolation and purification using column chromatography on silica gel using a stepwise gradient system (n-hexane to methanol). Briefly, a serial two fold dilutions of the test materials dissolved in DMSO were prepared prior to addition of 100μl overnight microbial suspension (108 cfu/ml) followed by incubation at 37°C (bacteria) or 26°C (dermatophytes and candida) for 24h. The highest concentration of DMSO remaining after dilution (5%, v/v) caused no inhibition to bacterial/candida/dermatophytes' growth. Antibiotic cycloheximide was used as reference for anticandidal and antidermatophyte comparison while oxacilin was used as reference for antibacterial testing. DMSO served as negative control. Turbidity was taken as indication of growth, thus the lowest concentration which remains clear after macroscopic evaluation was taken as the minimum inhibitory concentration (MIC). The isolation of n-hexane and DCM extracts of the rhizomes and pseudostems of Alpinia conchigera via column chromatography yielded two triterpenes isolated as a mixture of stigmasterol and

  9. Compound induction electric rotating machine

    Energy Technology Data Exchange (ETDEWEB)

    Decesare, D

    1987-07-28

    The present invention generally relates to dynamo-electric machines cabable of operating in a generator mode or in a motor mode and more specifically, to increased efficiency compound interaction AC and/or DC dynamo-electric machines. This patent describes such a machine having a distributed armature winding in a cylindrical rotor wound to form axial and substantially radial winding portions and including permanent and/or electromagnets to couple magnetic flux into the peripheral or circumferential surface of the rotor, and to provide interaction between a magnetic field formed beyond the rotor axial surfaces and the rotor to thereby enhance the total induction of flux into the rotor for improved, more efficient operation. 28 figs.,

  10. METHOD OF RECOVERING URANIUM COMPOUNDS

    Science.gov (United States)

    Poirier, R.H.

    1957-10-29

    S>The recovery of uranium compounds which have been adsorbed on anion exchange resins is discussed. The uranium and thorium-containing residues from monazite processed by alkali hydroxide are separated from solution, and leached with an alkali metal carbonate solution, whereby the uranium and thorium hydrorides are dissolved. The carbonate solution is then passed over an anion exchange resin causing the uranium to be adsorbed while the thorium remains in solution. The uranium may be recovered by contacting the uranium-holding resin with an aqueous ammonium carbonate solution whereby the uranium values are eluted from the resin and then heating the eluate whereby carbon dioxide and ammonia are given off, the pH value of the solution is lowered, and the uranium is precipitated.

  11. Compound verbs in English revisited

    Directory of Open Access Journals (Sweden)

    Alexandra Bagasheva

    2011-05-01

    Full Text Available Compound verbs (CVs raise a number of puzzling questions concerning their classification, their word formation properties, their basic onomasiological function and their transitory status between “relations” and “conceptual-cores”. Using the constructionist framework in the context of a usage-based network model of language, the paper develops a proposal for the classification of CVs and an account of the semantics of word formation niches of CVs created by analogy, which yield unified semantic analyses. A hypothesis is formulated concerning the acategorial nature of CV internal constituents, which naturally accommodates the proposed classification and word formation niche analyses. A hypothesis is formulated in this context concerning the intermediary status of CVs as language-cognition interface units collapsing the “relation-conceptual core” distinction. Conclusions are drawn relating to the transitory nature of most CVs as nonce creations performing a special function in communicative interaction.

  12. Compound verbs in English revisited

    Directory of Open Access Journals (Sweden)

    Alexandra Bagasheva

    2011-01-01

    Full Text Available Compound verbs (CVs raise a number of puzzling questions concerning their classification, their word formation properties, their basic onomasiological function and their transitory status between “relations” and “conceptual-cores”. Using the constructionist framework in the context of a usage-based network model of language, the paper develops a proposal for the classification of CVs and an account of the semantics of word formation niches of CVs created by analogy, which yield unified semantic analyses. A hypothesis is formulated concerning the acategorial nature of CV internal constituents, which naturally accommodates the proposed classification and word formation niche analyses. A hypothesis is formulated in this context concerning the intermediary status of CVs as language-cognition interface units collapsing the “relation-conceptual core” distinction. Conclusions are drawn relating to the transitory nature of most CVs as nonce creations performing a special function in communicative interaction.

  13. The toxicology of uranium compounds

    International Nuclear Information System (INIS)

    Brickner, D.

    1988-11-01

    This review of literature presents and criticises the current knowledge relevant to risk assessment in cases of human exposure to natural uranium compounds due to industrial accidents. The major risk of high uranium exposure is renal-tubular damage which may lead to acute renal insufficiency and death. Radiation damage is not expected in these circumstances. In this review the metabolism of uranium in the body, the health effects and the possible medical treatment are discussed, with an emphasis on relatively large exposure of short duration. The current ICRP lung model does not represent all the factors affecting the kinetics of uranium oxides in the respiratory tract. The significance of these factors, not represented by the model, for risk assessment in such exposures, is not known. The current recommendations for treatment are not scientifically based. Further investigations are urgently needed to enable a rational medical preparadness

  14. Propriétés physico-chimiques et biologiques des substances humiques en relation avec le développement végétal (synthèse bibliographique

    Directory of Open Access Journals (Sweden)

    Tahiri, A.

    2014-01-01

    Full Text Available Physical-chemical and biological properties of humic substances in relation to plant growth. A review. Humic substances (HS are organic compounds resulting from the physical, chemical and microbiological transformation of plant and animal residues. Humic substances are heterogeneous and complex carbon macromolecules, which can be found in soils, sediments, surface water and leachates. They are derived from different humification processes, generating variable and complex molecules mainly composed of carbon, hydrogen, oxygen, nitrogen, sulfur and functional groups (COOH, OH, C = O. These substances are known to have an effect on soil properties, interacting with plant growth and development and with microorganism activity. The influence on plant growth is expressed directly through stimulation of biochemical and metabolic processes or indirectly through mineral nutrition improvement. But the intensity of the response is dependent on various parameters such as the origin, the nature of the initial organic matter, transformation processes, HS concentration, experimental conditions and plant species. The mechanisms by which HS cause their positive effects on plant growth are not yet fully understood.

  15. Compound process fuel cycle concept

    International Nuclear Information System (INIS)

    Ikegami, Tetsuo

    2005-01-01

    Mass flow of light water reactor spent fuel for a newly proposed nuclear fuel cycle concept 'Compound Process Fuel Cycle' has been studied in order to assess the capacity of the concept for accepting light water reactor spent fuels, taking an example for boiling water reactor mixed oxide spent fuel of 60 GWd/t burn-up and for a fast reactor core of 3 GW thermal output. The acceptable heavy metal of boiling water reactor mixed oxide spent fuel is about 3.7 t/y/reactor while the burn-up of the recycled fuel is about 160 GWd/t and about 1.6 t/y reactor with the recycled fuel burn-up of about 300 GWd/t, in the case of 2 times recycle and 4 times recycle respectively. The compound process fuel cycle concept has such flexibility that it can accept so much light water reactor spent fuels as to suppress the light water reactor spent fuel pile-up if not so high fuel burn-up is expected, and can aim at high fuel burn-up if the light water reactor spent fuel pile-up is not so much. Following distinctive features of the concept have also been revealed. A sort of ideal utilization of boiling water reactor mixed oxide spent fuel might be achieved through this concept, since both plutonium and minor actinide reach equilibrium state beyond 2 times recycle. Changes of the reactivity coefficients during recycles are mild, giving roughly same level of reactivity coefficients as the conventional large scale fast breeder core. Both the radio-activity and the heat generation after 4 year cooling and after 4 times recycle are less than 2.5 times of those of the pre recycle fuel. (author)

  16. Organic electronic devices using phthalimide compounds

    Science.gov (United States)

    Hassan, Azad M.; Thompson, Mark E.

    2010-09-07

    Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

  17. Insecticidal Activity of Cyanohydrin and Monoterpenoid Compounds

    Directory of Open Access Journals (Sweden)

    Joel R. Coats

    2000-04-01

    Full Text Available The insecticidal activities of several cyanohydrins, cyanohydrin esters and monoterpenoid esters (including three monoterpenoid esters of a cyanohydrin were evaluated. Topical toxicity to Musca domestica L. adults was examined, and testing of many compounds at 100 mg/fly resulted in 100% mortality. Topical LD50 values of four compounds for M. domestica were calculated. Testing of many of the reported compounds to brine shrimp (Artemia franciscana Kellog resulted in 100% mortality at 10 ppm, and two compounds caused 100% mortality at 1 ppm. Aquatic LC50 values were calculated for five compounds for larvae of the yellow fever mosquito (Aedes aegypti (L.. Monoterpenoid esters were among the most toxic compounds tested in topical and aquatic bioassays.

  18. The content of compound conditioning.

    Science.gov (United States)

    Harris, Justin A; Andrew, Benjamin J; Livesey, Evan J

    2012-04-01

    In three experiments using Pavlovian conditioning of magazine approach, rats were trained with a compound stimulus, AB, and were concurrently trained with stimulus B on its own. The reinforcement rate of B, rB, was either 1/2, 2/3, or 2/5 of rAB. After extended training, the conditioning strength of A was assessed using probe trials in which A was presented alone. Responding during A was compared with that during AB, B, and a third stimulus, C, for which rC = rAB - rB. In each experiment, the rats' response rate during A was almost identical to that during C (and during B, when rB = 1/2rAB). This suggests that, during AB conditioning, the rats had learned about rA as being equal to [rAB - rB], and implies that the content of their learning was a linear function of r. The findings provide strong support for rate-based models of conditioning (e.g., Gallistel & Gibbon, 2000). They are also consistent with the associative account of learning defined in the Rescorla and Wagner (1972) model, but only if the learning rate during reinforcement equals that during nonreinforcement. (c) 2012 APA, all rights reserved.

  19. Technetium complexation by macrocyclic compounds

    International Nuclear Information System (INIS)

    Li Fan Yu.

    1983-01-01

    Research in nuclear medicine are directed towards the labelling of biological molecules, however, sup(99m)Tc does not show sufficient affinity for these molecules. The aim of this study was to evaluate the ability of macrocyclic compounds to bind strongly technetium in order to be used as complexation intermediate. The reducing agents used were a stannous complex and sodium dithionite. Cryptates and polyesters are not good complexing agents. They form two complexes: a 2:1 sandwich complex or 3:2 and a 1:1 complex. Cyclams are good complexing agents for technetium their complexations strength was determined by competition with pyrophosphate, gluconate and DTPA. Using the method of ligand exchange, the oxidation state of technetium in the Tc-cyclam complex was IV or V. They are 1:1 cationic complexes, the complex charge is +1. The biodistribution in rats of labelling solutions containing (cyclam 14 ane N 4 ) C 12 H 25 shows a good urinary excretion without intoxication risks [fr

  20. Properties of tritium and its compounds

    International Nuclear Information System (INIS)

    Belovodskij, L.F.; Gaevoj, V.K.; Grishmanovskij, V.I.

    1985-01-01

    Ways of tritium preparation and different aspects of its application are considered. Physicochemical properties of this isotope and some compounds of it - tritium oxides, lithium, titanium, zirconium, uranium tritides, tritium organic compounds - are discussed. In particular, diffusion of tritium and its oxide through different materials, tritium oxidation processes, decomposition of tritium-containing compounds under the action of self-radiation are considered. Main radiobiological tritium properties are described

  1. Complex fragment emission from hot compound nuclei

    International Nuclear Information System (INIS)

    Moretto, L.G.

    1986-03-01

    The experimental evidence for compound nucleus emission of complex fragments at low energies is used to interpret the emission of the same fragments at higher energies. The resulting experimental picture is that of highly excited compound nuclei formed in incomplete fusion processes which decay statistically. In particular, complex fragments appear to be produced mostly through compound nucleus decay. In the appendix a geometric-kinematic theory for incomplete fusion and the associated momentum transfer is outlined. 10 refs., 19 figs

  2. Antibacterial Compounds from Red Seaweeds (Rhodophyta)

    OpenAIRE

    Noer Kasanah; Triyanto Triyanto; Drajad Sarwo Seto; Windi Amelia; Alim Isnansetyo

    2015-01-01

    Seaweeds produce great variety of metabolites benefit for human. Red seaweeds (Rhodophyta) are well known as producer of phycocolloids such agar, agarose, carragenan and great variety of secondary metabolites. This review discusses the red algal secondary metabolites with antibacterial activity. The chemical constituents of red algae are steroid, terpenoid, acetogenin and dominated by halogenated compounds mainly brominated compounds. Novel compounds with intriguing skeleton are also reported...

  3. Nitrogen compounds behavior under irradiation environment

    International Nuclear Information System (INIS)

    Ichikawa, Nagayoshi; Takagi, Junichi; Yotsuyanagi, Tadasu

    1991-01-01

    Laboratory experiments were performed to evaluate nitrogen compounds behavior in liquid phase under irradiation environments. Nitrogen compounds take a chemical form of ammonium ion under reducing condition by gamma irradiation, whereas ammonium ions are rather stable even under oxidizing conditions. Key reactions were pointed out and their reaction rate constants and activation energies were estimated through computer code simulation. A reaction scheme for nitrogen compounds including protonate reaction was proposed. (author)

  4. Technetium compounds and their field of application

    International Nuclear Information System (INIS)

    Zaitseva, L.L.; Velichko, A.V.; Vinogradov, I.V.

    1988-02-01

    This chapter reviews the different applications of technetium and technetium compounds in catalysis, corrosion inhibition, superconductivity of technetium alloys, diagnostic techniques, radioisotope generators and radiopharmaceuticals. 649 refs [fr

  5. Diazo Compounds: Versatile Tools for Chemical Biology.

    Science.gov (United States)

    Mix, Kalie A; Aronoff, Matthew R; Raines, Ronald T

    2016-12-16

    Diazo groups have broad and tunable reactivity. That and other attributes endow diazo compounds with the potential to be valuable reagents for chemical biologists. The presence of diazo groups in natural products underscores their metabolic stability and anticipates their utility in a biological context. The chemoselectivity of diazo groups, even in the presence of azido groups, presents many opportunities. Already, diazo compounds have served as chemical probes and elicited novel modifications of proteins and nucleic acids. Here, we review advances that have facilitated the chemical synthesis of diazo compounds, and we highlight applications of diazo compounds in the detection and modification of biomolecules.

  6. Molecular mechanism of radiosensitization by nitro compounds

    International Nuclear Information System (INIS)

    Kagiya, T.; Wada, T.; Nishimoto, S.I.

    1984-01-01

    In this chapter a molecular mechanism of radiosensitization by electron-affinic nitro compounds is discussed, mainly on the basis of the results of the radiation-induced chemical studies of DNA-related compounds in aqueous solutions. In Section II the general aspects of the radiation chemistry of organic compounds in the absence and presence of oxygen in aqueous solution are shown in order to demonstrate characteristic differences between radiation chemical reactions in hypoxic and oxic cells. The effects of nitro compounds on the radiolysis yields of DNA-related compounds in aqueous solutions are described in Section III. In Section IV the retardation effects of misonidazole on the radiation chemical processes of DNA-related compounds are shown along with the reaction characteristics of misonidazole with hydroxyl radical ( . OH) and hydrated electron (e/sub aq/-bar) produced by the radiolysis of water. The promotion of radiation-induced oxidation of thymine into thymine glycol (TG) by nitro radiosensitizers in deoxygenated solution and the relations between the activity of nitro compound for the thymine glycol formation and the enhancement activity measured in vitro are described in Section V. Finally, the protection against radiation-induced damage of thymine by a sulfhydryl compound of glutathione and the ability of electron-affinic compounds to decompose the intracellular radioprotector are described in Section VI

  7. Microbial growth on C1 compounds: proceedings

    International Nuclear Information System (INIS)

    Crawford, R.L.; Hanson, R.S.

    1984-01-01

    This book contains individual papers prepared for the 4th International Symposium on Microbial Growth on One Carbon Compounds. Individual reports were abstracted and indexed for EDB. Topics presented were in the areas of the physiology and biochemistry of autotraps, physiology and biochemistry of methylotrophs and methanotrops, physiology and biochemistry of methanogens, genetics of microbes that use C 1 compounds, taxonomy and ecology of microbes tht grow on C 1 compounds, applied aspects of microbes that grow on C 1 compounds, and new directions in C 1 metabolism. (DT)

  8. Potent antifouling compounds produced by marine Streptomyces

    KAUST Repository

    Xu, Ying

    2010-02-01

    Biofouling causes huge economic loss and a recent global ban on organotin compounds as antifouling agents has increased the need for safe and effective antifouling compounds. Five structurally similar compounds were isolated from the crude extract of a marine Streptomyces strain obtained from deep-sea sediments. Antifouling activities of these five compounds and four other structurally-related compounds isolated from a North Sea Streptomyces strain against major fouling organisms were compared to probe structure-activity relationships of compounds. The functional moiety responsible for antifouling activity lies in the 2-furanone ring and that the lipophilicity of compounds substantially affects their antifouling activities. Based on these findings, a compound with a straight alkyl side-chain was synthesized and proved itself as a very effective non-toxic, anti-larval settlement agent against three major fouling organisms. The strong antifouling activity, relatively low toxicity, and simple structures of these compounds make them promising candidates for new antifouling additives. © 2009 Elsevier Ltd. All rights reserved.

  9. Neurotoxicity of fragrance compounds: A review.

    Science.gov (United States)

    Pinkas, Adi; Gonçalves, Cinara Ludvig; Aschner, Michael

    2017-10-01

    Fragrance compounds are chemicals belonging to one of several families, which are used frequently and globally in cosmetics, household products, foods and beverages. A complete list of such compounds is rarely found on the ingredients-list of such products, as "fragrance mixtures" are defined as "trade secrets" and thus protected by law. While some information regarding the general toxicity of some of these compounds is available, their neurotoxicity is known to a lesser extent. Here, we discuss the prevalence and neurotoxicity of fragrance compounds belonging to the three most common groups: phthalates, synthetic musks and chemical sensitizers. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Four new compounds from Imperata cylindrica.

    Science.gov (United States)

    Liu, Xuan; Zhang, Bin-Feng; Yang, Li; Chou, Gui-Xin; Wang, Zheng-Tao

    2014-04-01

    Four new compounds, impecylone (1), deacetylimpecyloside (2), seguinoside K 4-methylether (3) and impecylenolide (4), were isolated from Imperata cylindrica along with two known compounds, impecyloside (5) and seguinoside K (6). Their structures were elucidated mainly by spectroscopic analyses including 1D- and 2D-NMR techniques, and the absolute configuration of 1 was confirmed by X-ray diffraction analysis. In calcium assay, the result indicated that compounds 1, 2, 4 and 5 cannot obviously inhibit the calcium peak value compared with the negative control, and suggested that the four compounds could not have anti-inflammatory activity.

  11. Caractérisation de l'état chimique d'un élément par fluorescence X : l'aluminium dans les zéolithes Characterizing the Chemical State of an Element by X-Ray Fluorescence: Aluminium in Zeolites

    Directory of Open Access Journals (Sweden)

    Freund E.

    2006-11-01

    Full Text Available La fluorescence X est essentiellement connue dans le domaine de l'analyse quantitative, mais c'est aussi une méthode qui permet d'obtenir des informations détaillées sur la structure électronique des éléments. Dans cet article, nous montrons qu'il est possible de mettre au point une technique simple de caractérisation de l'état chimique d'un élément en utilisant de façon conjointe un spectromètre commercial et un programme adapté de traitement des données. Nous avons appliqué cette technique au cas de l'aluminium dans une zéolithe particulière : la mordénite dite à petits pores modifiée par différents traitements. Nous avons ainsi pu classer les solides suivant leur rapport (AI hexa-coordinné/AI tétracoordinné et montrer que le débouchage de la mordénite dite à petits pores est lié à l'extraction d'atomes d'aluminium de la charpente cristalline. X-ray fluorescence is mainly known in the field of qua-titative analysis, but it is also a useful method for obtaining detailed informations about the electronic structure of elements. This article shows that it is possible to develop a simple technique for characterizing the chemical state of an element by combining a commercial spectrometer with a program suited for data processing. This technique has been applied to the case of aluminum in a specific zeolite, ( small portmodernite, modified by various treatments. We were thus able to classify the solids according to the ratio of hexacoordinated AI/tetracoordinated AI and to show that the deblocking of the small portmordenite is linked to the extraction of aluminum atomrs from the crystalline structure.

  12. Influence de la nature chimique et minéralogique des argiles et du processus de fabrication sur la qualité des carreaux céramiques Influence of chemical and mineralogical nature of clay and manufacturing process on the quality of ceramic tiles

    Directory of Open Access Journals (Sweden)

    Sadik C.

    2012-09-01

    Full Text Available La présente étude correspond à une approche pluridisciplinaire menée en étroite collaboration entre des géologues, des chimistes et des industriels de la céramique. Les résultats confirment l’étroite relation existante entre la composition des argiles et la qualité du produit céramique final. Les briquettes obtenues, dans les mêmes conditions, à partir de deux argiles marocaines assez différentes du point de vue chimique et minéralogique, présentent des caractéristiques technologiques bien distinctes. l’utilisation d’adjuvants minéraux, bien sélectionnés, contribue à l’équilibrage des argiles brutes et conduit à une nette amélioration de la qualité du produit céramique, notamment une réduction de leur retrait à la cuisson et une augmentation de leur résistance à la flexion. Concernant l’effet du processus de fabrication, l’application de l’engobe et de l’émail, s’avère être à l’origine de bombement des carreaux lors de la cuisson, en raison vraisemblablement de la différence des coefficients de dilatation des deux milieux argile et émail. This study is conducted in a multidisciplinary collaboration between geologists, chemists and industrial ceramics. The results confirm the close ralatioship existing between the composition of clays and quality of the finished ceramic pieces. The obtained specimens, under the same conditions, from two moroccan clays that are different on the chimico-mineralogical point of view, present distinct technological characteristics. The use of well selected mineral adjuvants, contributes to the balancing of raw clays and leads to a marked improvement in the quality of the ceramic product, including a reduction on their firing shrinkage and an increase of flexural strength. Concerning the effect of the manufacturing process, the application of the glaze, turns out to be the cause of bulging tiles during firing, probably because of the difference in thermal

  13. Prioritizing pesticide compounds for analytical methods development

    Science.gov (United States)

    Norman, Julia E.; Kuivila, Kathryn; Nowell, Lisa H.

    2012-01-01

    The U.S. Geological Survey (USGS) has a periodic need to re-evaluate pesticide compounds in terms of priorities for inclusion in monitoring and studies and, thus, must also assess the current analytical capabilities for pesticide detection. To meet this need, a strategy has been developed to prioritize pesticides and degradates for analytical methods development. Screening procedures were developed to separately prioritize pesticide compounds in water and sediment. The procedures evaluate pesticide compounds in existing USGS analytical methods for water and sediment and compounds for which recent agricultural-use information was available. Measured occurrence (detection frequency and concentrations) in water and sediment, predicted concentrations in water and predicted likelihood of occurrence in sediment, potential toxicity to aquatic life or humans, and priorities of other agencies or organizations, regulatory or otherwise, were considered. Several existing strategies for prioritizing chemicals for various purposes were reviewed, including those that identify and prioritize persistent, bioaccumulative, and toxic compounds, and those that determine candidates for future regulation of drinking-water contaminants. The systematic procedures developed and used in this study rely on concepts common to many previously established strategies. The evaluation of pesticide compounds resulted in the classification of compounds into three groups: Tier 1 for high priority compounds, Tier 2 for moderate priority compounds, and Tier 3 for low priority compounds. For water, a total of 247 pesticide compounds were classified as Tier 1 and, thus, are high priority for inclusion in analytical methods for monitoring and studies. Of these, about three-quarters are included in some USGS analytical method; however, many of these compounds are included on research methods that are expensive and for which there are few data on environmental samples. The remaining quarter of Tier 1

  14. Preparation and physico-chemical study of nitroxide radicals. Isotopic marking with carbon 13 and deuterium; Preparations et etudes physico-chimiques de radicaux nitroxydes. Marquage isotopique au carbone 13 et au deuterium

    Energy Technology Data Exchange (ETDEWEB)

    Chapelet-Letourneux, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-07-01

    N-t-butyl-N-phenyl nitroxide is obtained by: a) action of t-butyl-magnesium chloride on nitrobenzene, or of phenyl-magnesium bromide on nitro-t-butane, b) oxidation of N-t-butyl-N-phenylhydroxylamine, c) oxidation of N-t-butylaniline. In these latter two cases, it has been possible to isolate the pure radical and to study it using UV, IR and EPR. It decomposes to give N-t-butylaniline and the N-oxide of N-t-butyl-p-quinon-imine. The action of peracids such as p-nitro-perbenzoic or m-chloro-perbenzoic acids on amines or hydroxylamines leads to the formation of stable or unstable nitroxide radicals easily observable by EPR. Finally, with a view to obtaining definite values for the coupling between the free electron of a nitroxide and carbon 13, the preparation of such radicals marked with {sup 13}C in the {alpha} or {beta} position of the nitroxide function has been carried out. The coupling with an {alpha} carbon 13 is negative and does not appear to vary with the spin density on the nitrogen. The interaction with the p nuclei of the nitrogen depends on the nature of the substituents: the two benzyl protons have a hyperfine splitting a{sub H} which is always less than that of the ethyl. On the other hand, the {sup 13}C coupling is greater in the first case. The usually adopted conformations for the compounds having the carbonyl group cannot account for the observed values of the {beta} couplings. (author) [French] Le N-t-butyl-N-phenyl nitroxyde est obtenu par: a) action du chlorure de t-butylmagnesium sur le nitrobenzene, ou du bromure de phenylmagnesium sur le nitro-t-butane, b) oxydation de la N-t-butyl-N-phenylhydroxylamine, c) oxydation de la N-t-butylaniline. Dans ces deux derniers cas, le radical a pu etre isole pur et etudie par UV, IR et RPE. Il se decompose en N-t-butylaniline et N-oxyde de N-t-butyl-p-quinonimine. L'action de peracides (p-nitroperbenzoique ou m-chloroperbenzoique) sur des amines ou des hydroxylamines conduit a des radicaux nitroxydes

  15. Auscultation d'ouvrages avec un capteur géotextile à fibres optiques

    Directory of Open Access Journals (Sweden)

    ARTIERES, Olivier

    2012-08-01

    Full Text Available Pour évaluer la sécurité d'un ouvrage en terre, il est indispensable de disposer et de pouvoir interpréter des données d'auscultation, mais les mesures sont parfois difficiles à mettre en place et pas toujours fiables sur le long terme. Avec l’insertion de fibres optiques dans un géotextile, la solution TenCate GeoDetect® est le premier système d'auscultation conçu spécifiquement pour les applications géotechniques. Implantée depuis huit ans avec succès sur de nombreux ouvrages, elle permet d’accéder à des informations jusqu’ici très difficiles à obtenir et ceci avec une grande précision.

  16. Acquisition de donnees a haute resolution et faible latence dediee aux capteurs avioniques de position

    Science.gov (United States)

    Koubaa, Zied

    The communication network and the detection mechanisms are two critical systems in a plane. Their performance has a direct impact on aircrafts. This is of particular interest for avionics designers, who have increasingly invested more and more in the development of these elements. As a part of a project in this domain, we introduce the design and the development of a smart interface for position sensors dedicated to flights (Smart Sensor Interface - SSI). This interface will serve to connect sensors of different technologies (electromagnetic, optical and MEMS) to the new communication network, AFDX. The role of this interface is to generate an appropriate excitation signal for certain types of sensors (R/LVDT), and to treat, demodulate, and digitize their output signals. The proposed interface is thus composed of a Signal Acquisition Path (SAP) and an Excitation Signal Generation (ESG). By adopting the Integrated Modular Avionics architecture (IMA), we can minimize the size of the classic interface, reduce its energy consumption and improve its reliability and its performance. The focus of our design is particularly on the Data Acquisition Path (DAP). An Architecture characterized by a high resolution (14 bits) and a low latency (1.2 ms) of this module is introduced and developed in this prestigious work. This architecture was developed after a wellconducted study of existing solutions found in literature work and a detailed analysis of the problems arise in the design and implementation of this system (DAP). The conversion of the sensor signal into a digital signal is the most important step in acquiring data, as it sets the resolution of the acquired information and generates the majority of its latency. This module can also affect the reliability and stability of the system. Among different models and architectures, the Delta-Sigma analog-to-digital converter (ADC) is preferred for this application (for better resolution). This converter is formed by an analog circuit (modulator) followed by digital filters. The complexity of the implementation, the processing delay and the output resolution are all susceptible to change depending on the architecture of these filters. Thus, the main problem while designing such a system arises in the opposing evolution of the resolution and latency parameters; the improvement or evolution of one, results in the destruction of the other. Therefore, our work aims to provide one or more method to optimize the latency caused by the CAN while maintaining the same resolution of the desired data (14 bits). This optimization takes into account the objective of integrating the DAP in modules of small size and low power consumption. This proposed solution was implemented in order to validate the design of the conception of the interface. We are also interested to achieve the proposed solution and validate our design. The obtained results will be evaluated after following the manufacturing strategy. The data acquisition unit is made up of two electronic components. The first component is an integrated circuit, which uses CMOS 0.13mum IBM technology and contains the analog part of CAN (SigmaDelta modulator). The second component is a Virtex-6 FPGA, which allows one to acquire the necessary digital processing required for the acquisition and conversion of the sensor signal. In the final version of the interface, our analog portion will be integrated with the analog portion of GSE in the same chip. The integrated digital logic in the (FPGA) role will thus provide digital data to the ESG module in order to generate the excitation signal.

  17. Fusion multi-capteurs pour la représentation et le suivi des objets dynamiques

    OpenAIRE

    Kmiotek , Pawel

    2009-01-01

    The subject of the thesis lies within the scope of the project "Intelligent Vehicle and its integration in the city of the future", led by the Systems and Transportation laboratory of the University of Technology of Belfort-Montbéliard. The objective of this project is to ensure a vehicle autonomous navigation in an urban environment. The autonomous navigation of a vehicle consists of a data processing sequence made up by three stages. The first one relates to the perception of the vehicle en...

  18. Medicinal Uses of Inorganic Compounds - 2

    Indian Academy of Sciences (India)

    In the first part of this article, we described medicinal uses of inorganic compounds relating to cancer care, infection and diabetic control, neurological, cardiovascular and in- flammatory diseases. This article contains further infor- mation on the medicinal uses of inorganic compounds as therapeutic and diagnostic in ...

  19. Lattice anisotropy in uranium ternary compounds

    DEFF Research Database (Denmark)

    Maskova, S.; Adamska, A.M.; Havela, L.

    2012-01-01

    Several U-based intermetallic compounds (UCoGe, UNiGe with the TiNiSi structure type and UNiAl with the ZrNiAl structure type) and their hydrides were studied from the point of view of compressibility and thermal expansion. Confronted with existing data for the compounds with the ZrNiAl structure...

  20. Bioautography indicates the multiplicity of antifungal compounds ...

    African Journals Online (AJOL)

    AJB SERVER

    2006-09-18

    Sep 18, 2006 ... 199 active compounds, followed by methanol (189) and hexane (73). This difference is apparently not related to the sectional division of the species (Carr, 1988). Comparison of eluent systems. Lastly we determined which TLC solvent system separa- ted the highest number of active compounds (Table 27).

  1. Compound sums and their applications in finance

    NARCIS (Netherlands)

    R. Helmers (Roelof); B. Tarigan

    2003-01-01

    textabstractCompound sums arise frequently in insurance (total claim size in a portfolio) and in accountancy (total error amount in audit populations). As the normal approximation for compound sums usually performs very badly, one may look for better methods for approximating the distribution of a

  2. Preparation and properties of compound Arnebiae radix ...

    African Journals Online (AJOL)

    The aim of this study was to prepare a compound Arnebiae radix microemulsion gel for transdermal delivery system and evaluate its characteristics. Materials and Methods: Based on ... previous used formulations. Keywords: Compound Arnebiae radix oil, microemulsion gel, pseudo-ternary phase diagram, characterization ...

  3. Comparative analysis of technical efficiencies between compound ...

    African Journals Online (AJOL)

    This study was designed to compare the level of technical efficiency in the compound and non compound farms in Imo state. A multi-stage random sampling technique was used to select 120 food crop farmers from two out of the three agricultural zones in Imo state. Using the Chow (1960) analysis of covariance technique ...

  4. Health promoting compounds in vegetables and fruits:

    DEFF Research Database (Denmark)

    Brandt, K.; Christensen, L.P.; Hansen-Møller, J.

    2004-01-01

    Vegetables contain unknown compounds with important health promoting effect. The described project defined and tested a two-step screening procedure for identification of such compounds. Step 1 is initial screening according to three criteria: 1.1, chemically reactive functional groups; 1...

  5. Improvements in or relating to compounds

    International Nuclear Information System (INIS)

    Woodhead, J.L.

    1983-01-01

    The invention provides a process for the preparation of a dispersible product containing a cerium compound which comprises heating a cerium (IV) oxide hydrate in the presence of a salt to cause deaggregation of aggregated crystallites in the cerium (IV) oxide hydrate and produce a dispersible product containing a cerium compound. (author)

  6. Organic halogen compounds in the environment

    International Nuclear Information System (INIS)

    1979-07-01

    There are 20 research reports on selected problems concerning the analysis, the occurence, and the behaviour of a wide spectrum of organic halogen compounds. The work was carried out in the framework of the project 'Organic Halogen Compounds in the Environment', financed by the BMFT, between 1975 and 1978. (orig.) [de

  7. Extraction, Isolation And Characterization Of Bioactive Compounds ...

    African Journals Online (AJOL)

    Natural products from medicinal plants, either as pure compounds or as standardized extracts, provide unlimited opportunities for new drug leads because of the ... The analysis of bioactive compounds present in the plant extracts involving the applications of common phytochemical screening assays, chromatographic ...

  8. Lichens as source of versatile bioactive compounds

    Directory of Open Access Journals (Sweden)

    Mitrović, T.

    2011-09-01

    Full Text Available Lichens represent unique symbiosis of fungi (mycobionts and algae (photobionts. Living in extreme conditions they developed various compounds to survive. Many of these original compounds have proven biological activities (antibiotic, antimycotic, antiviral, antitumor, antioxidant, etc . This paper is synthesis of currently known data about lichens extracts and their potential use in pharmaceutics and medicine.

  9. Bis(1,3-dithiole) Compounds

    DEFF Research Database (Denmark)

    Andersen, Jan Rud; Engler, E. M.; Green, D. C.

    1977-01-01

    There is described the preparation of bis-1,3-dithiole compounds (I) which are key synthetic precursors for the preparation of new polymeric metal bis(dithiolene) (i.e., II) and tetrathiafulvalene compounds (i.e., III): (Image Omitted)...

  10. Sulfamides in the synthesis of heterocyclic compounds

    International Nuclear Information System (INIS)

    Gazieva, Galina A; Kravchenko, Angelina N; Lebedev, Oleg V

    2000-01-01

    A comparative analysis of the structures and physicochemical properties of sulfamides and ureas has been performed. New procedures for the synthesis of heterocyclic compounds containing the sulfamide fragment are surveyed and the properties of the resulting compounds are described. The bibliography includes 112 references.

  11. Bioactive compounds in whole grain wheat

    NARCIS (Netherlands)

    Mateo Anson, N.

    2010-01-01

    Bread can be healthier! Consuming whole-grain foods can prevent cardiovascular diseases, type-2 diabetes and metabolic syndrome. This is due to bioactive compounds in whole grain, such as antioxidants and anti-inflammatory compounds. We found that the different fractions of a wheat grain vary much

  12. Pickpocket compounds from Latin to Romance

    NARCIS (Netherlands)

    Nielsen Whitehead, Benedicte

    2012-01-01

    This thesis discusses the development in Proto–Indo–European, Latin and Romance of a word–formation pattern which the most adequate terminology in use dubs ‘verbal government compounds with a governing first member’; I use the shorthand ‘pickpocket compounds’. The first member of such compounds

  13. Semantics vs Pragmatics of a Compound Word

    Science.gov (United States)

    Smirnova, Elena A.; Biktemirova, Ella I.; Davletbaeva, Diana N.

    2016-01-01

    This paper is devoted to the study of correlation between semantic and pragmatic potential of a compound word, which functions in informal speech, and the mechanisms of secondary nomination, which realizes the potential of semantic-pragmatic features of colloquial compounds. The relevance and the choice of the research question is based on the…

  14. Antimicrobial susceptibility assessment of compound from ...

    African Journals Online (AJOL)

    Ethyl acetate extract of the culture filtrate of Aspergillus fumigatus on chromatographic analysis has led to the isolation of the compound, AF-1 which exhibited a significant in vitro antimicrobial activity against the tested pathogenic microorganism. The structure of the isolated compound, AF-1 was identified as ...

  15. Perfluorinated Compounds: Emerging POPs with Potential Immunotoxicity

    Science.gov (United States)

    Perfluorinated compounds (PFCs) have been recognized as an important class of environmental contaminants commonly detected in blood samples of both wildlife and humans. These compounds have been in use for more than 60 years as surface treatment chemicals, polymerization aids, an...

  16. Intercalated compounds of niobium and tantalum dicalcogenides

    International Nuclear Information System (INIS)

    Wypych, F.

    1988-01-01

    The synthesis of niobium and tantalum lamellar compounds and its intercalated derivatives is described. The intercalated compounds with lithium, with alkaline metal and with metals of the first-row transition are studied, characterized by X-ray diffraction. (C.G.C.) [pt

  17. Genetic effects of organic mercury compounds

    Energy Technology Data Exchange (ETDEWEB)

    Ramel, C

    1967-01-01

    Organic mercury compounds have a c-mitotic effect on plant cells that cause polyploidi. Studies were performed on Allium root cells. These investigations involved methyl mercury dicyandiamide, methyl mercury hydroxide, and phenyl mercury hydroxide. The lowest concentration necessary for a cytologically observable effect was about 0.05 ppM Hg for the methyl compounds. For the phenyl compound, the value was lower. Experiments were performed on Drosophila melanogaster. The question was whether the mercury would reach the gonads. Experimental data with mercury treated larvae indicated a chromosome disjunction. Data indicated a preferential segregation at the meiotic division might be involved. Experiments are being performed on mice inbred (CBA) in order to investigate teratogenic effects and dominant lethality caused by organic mercury compounds. The mutagenic effects of these compounds are studied on Neurospora Drosophila. No conclusive data is now available.

  18. Integrated modelling of two xenobiotic organic compounds

    DEFF Research Database (Denmark)

    Lindblom, Erik Ulfson; Gernaey, K.V.; Henze, Mogens

    2006-01-01

    This paper presents a dynamic mathematical model that describes the fate and transport of two selected xenobiotic organic compounds (XOCs) in a simplified representation. of an integrated urban wastewater system. A simulation study, where the xenobiotics bisphenol A and pyrene are used as reference...... compounds, is carried out. Sorption and specific biological degradation processes are integrated with standardised water process models to model the fate of both compounds. Simulated mass flows of the two compounds during one dry weather day and one wet weather day are compared for realistic influent flow...... rate and concentration profiles. The wet weather day induces resuspension of stored sediments, which increases the pollutant load on the downstream system. The potential of the model to elucidate important phenomena related to origin and fate of the model compounds is demonstrated....

  19. New uranium compounds preparation and use as catalyst for hydrogenation of non-saturated organic compounds

    International Nuclear Information System (INIS)

    Arnaudet, L.; Folcher, G.

    1985-01-01

    Preparation of new organic uranium compounds and their use as catalysts for hydrogenation of non-saturated organic compounds are described. These compounds include Uranium III, a cyclopentadienic group, an alkyl group and an acetylenic derivative C 6 H 5 C triple bonds CR fixed by a π bond. Catalysts can be prepared with depleted uanium for hydrogenation of olefins for example [fr

  20. Lits fluidisés pour l'industrie chimique. Extrapolation et amélioration des catalyseurs. Première partie : Etudes et modèles. Enseignements issus des pilotes Fluidized Beds in Chemical Industry. Scale Up and Catalysts Improvement. First Part: Studies, Models, Learning from Pilot Plants

    Directory of Open Access Journals (Sweden)

    Botton R.

    2006-12-01

    Full Text Available Les unités de production en lits fluidisés catalytiques sont apparues vers 1942 dans l'industrie pétrolière et vers 1960 dans l'industrie chimique. On se limitera ici au problème de l'extrapolation des lits fluidisés catalytiques pour l'industrie chimique, qui exigent de très hautes performances (> 99 % de conversion. Leur mise au point a, dans le passé, nécessité l'exploitation sur des sites industriels de coûteux pilotes de 0,5 m de diamètre et de plus de 10 m de hauteur. Nous montrerons que ces pilotes peuvent être évités et que le passage direct du laboratoire à l'échelle industrielle est réalisable. Cette possibilité offre en plus une méthode simple pour améliorer les catalyseurs des unités industrielles. Elle ouvre aussi cette technique, très appréciée en production, aux produits de petits tonnages. La présentation de cet article sera faite en trois parties : - La première, présentée ci-après, expose les problèmes majeurs posés par l'extrapolation, puis résume les études effectuées. Les travaux d'extrapolation relatifs à deux procédés effectués avec des pilotes sont ensuite présentés, à titre d'exemples. De ces travaux sont déduites les performances que l'on peut espérer obtenir avec un réacteur catalytique à lit fluidisé, ainsi que les règles de tendances à suivre pour y parvenir. - La deuxième partie, intitulée Stratégie n'utilisant que des expériences de laboratoire , propose une stratégie expérimentale permettant d'obtenir en laboratoire les informations nécessaires pour passer directement à l'échelle industrielle avec des expériences suggérées en partie par les résultats exposés dans le premier article. Les relations expérimentales établies lors de ces études montrent que les propriétés d'un lit fluidisé ne dépendent (mis à part quelquefois le diamètre du réacteur que d'un paramètre appelé vitesse minimum de fluidisation de comportement . - La troisième partie

  1. Evolution des caractéristiques physico-chimiques de deux zones de frayères à sédimentation contrastée et premiers résultats de survie embryo-larvaire de truite commune (Salmo trutta

    Directory of Open Access Journals (Sweden)

    MASSA F.

    1998-07-01

    Full Text Available L'impact chimique et physique de la sédimentation sur la survie d'oeufs de Salmonidés a été étudié dans la partie amont de deux ruisseaux d'un même bassin à production salmonicole contrastée : le Moulinet qui présente une faible population de truites et la Roche qui est un ruisseau très productif. Les matières en suspension et les sédiments déposés ont été collectés à un pas de temps de 8 ou 15 jours en 1996 et 1997 et les survies embryo-larvaires ont été estimées en parallèle, dans des incubateurs artificiels. Les taux de survie ont été déterminés à l'émergence en 1996 et de la fécondation à l'éclosion, puis de l'éclosion à l'émergence en 1997. Les paramètres chimiques de l'eau interstitielle (oxygène, pH, nitrates, nitrites et ammoniac ont été mesurés au pas de temps de la semaine pendant la période d'incubation 1997 sur des dispositifs enfouis dans le substrat du ruisseau et au moment de l'éclosion dans les incubateurs contenant les oeufs. Les premiers résultats montrent que les taux de survie embryo-larvaires sont nuls en 1996 et faibles en 1997 (0 à 11 %, moyenne : 3,3 % dans le ruisseau du Moulinet alors que parallèlement, la survie est de 20 % sur un incubateur en 1996 et varie de 0 à 23 % en 1997 (moyenne : 7,7 % dans le ruisseau de la Roche. De l'éclosion à l'émergence, les survies sont supérieures à 80 % dans les deux ruisseaux. La sédimentation est contrastée sur les deux sites, plus forte en masse dans le ruisseau de la Roche pendant la période d'incubation mais de granulométrie beaucoup plus grossière que dans le ruisseau du Moulinet (sableuse dominante contre argilolimoneuse. Les teneurs en oxygène dissous mesurées dans le substrat de la Roche restent élevées pendant toute la période d'incubation (teneur minimum de 5 mg/l et sont significativement supérieures à celles mesurées dans le ruisseau du Moulinet pendant la deuxième partie de l'incubation 1997. D'autre part

  2. Chemical Behaviour of C{sup 11} in Liquid Hydrocarbons; Comportement Chimique de {sup 11}C dans les Hydrocarbures Liquides; Khimicheskaya kharakteristika ugleroda-11 v zhidkikh uglevodorodakh; Comportamiento Quimico del {sup 11}C en Hidrocarburos Liquidos

    Energy Technology Data Exchange (ETDEWEB)

    Voigt, A. F.; Clark, D. E.; Mesich, F. G. [Institute of Atomic Research and Department of Chemistry, Iowa State University, Ames, IA (United States)

    1965-04-15

    Carbon-11 is produced by the C{sup 12} ({gamma}, n)Cu{sup 11} reaction in the Bremsstrahlung beam of a 70 MeV electron synchrotron. As target materials, liquid hydrocarbons with 5 and 6 carbons have been used, including normal, branched and alicyclic pentanes and hexanes as well as benzene. The behaviour of Cu{sup 11} has been studied by gas chromatographic separation of the products, counting the Cu{sup 11} in the gas stream in a cell placed in a well-type scintillation counter. In each experiment yields of different products were compared to the yield of acetylene as an internal standard and either to a tantalum monitor or to the total Cu{sup 11} produced as measured in the entire sample before separation. The flow counters were calibrated in terms of total Cu{sup 11} produced in experiments in which the complete sample was burned to CO{sub 2} and passed through a flow counter. Our earlier experiments were concerned only with the gaseous products that have now been well characterized for the various target molecules under different dosage conditions. Current experiments on product molecules similar in size to the target have proved very helpful in deciding on mechanisms for recombination of recoil atoms. Of particular interest is the yield of product with one carbon more than the target,the result of an addition reaction. The location of the additional atom on a target molecule having several types of addition sites gives information regarding the process itself. When the recoil atom is slowed to an energy at which it is possible for a bond to be formed, at least temporarily, the extra energy which the Cu{sup 11} atom brings into the system may cause bond rupture elsewhere within the activated complex usually leading to a two-carbon product. If the complex is able to hold together without rupturing, an additional product will result. Thus comparison of the yields of two-carbon compounds, acetylene, ethylene and ethane, and the additional products provides

  3. Spin polarization in rare earth intermetallic compounds

    International Nuclear Information System (INIS)

    Steenwijk, F.J. van

    1976-01-01

    In this thesis the results of Moessbauer experiments performed on a series of intermetallic compounds of europium and gadolinium are reported. For each of these compounds the magnetic hyperfine field, the electric field gradient at the nuclear site and the isomer shift were determined. For most of the compounds the magnetic ordering temperature was also measured. For some of the europium compounds (e.g. EuAu 5 , EuAg 5 , and EuCu 5 ) it could be derived from the measurements that the easy direction of magnetization falls along the crystallographic c-axis. In a number of compounds (e.g. EuCu 5 , EuZn 5 , EuAu 2 and GdCu 5 ), the various contributions to the magnetic hyperfine field were disentangled by the investigation of suitable pseudobinary compounds that are dilute in Eu. The neighbour contribution Hsub(N) and the paramagnetic Curie temperature thetasub(p) were compared with each other in terms of the RKKY model for EuCu 5 and GdCu 5 . Since the correspondence was found to be poor it was concluded that the magnetic behaviour in these compounds cannot be described by a simple free electron picture as is the basis for the RKKY model

  4. Aroma compounds in sweet whey powder.

    Science.gov (United States)

    Mahajan, S S; Goddik, L; Qian, M C

    2004-12-01

    Aroma compounds in sweet whey powder were investigated in this study. Volatiles were isolated by solvent extraction followed by solvent-assisted flavor evaporation. Fractionation was used to separate acidic from nonacidic volatiles. Gas chromatography/mass spectrometry and gas chromatography/olfactometry were used for the identification of aroma compounds. Osme methodology was applied to assess the relative importance of each aroma compound. The most aroma-intense free fatty acids detected were acetic, propanoic, butanoic, hexanoic, heptanoic, octanoic, decanoic, dodecanoic, and 9-decenoic acids. The most aroma-intense nonacidic compounds detected were hexanal, heptanal, nonanal, phenylacetaldehyde, 1-octen-3-one, methional, 2,6-dimethylpyrazine, 2,5-dimethylpyrazine, 2,3-dimethylpyrazine, 2,3,5-trimethylpyrazine, furfuryl alcohol, p-cresol, 2-acetylpyrrole, maltol, furaneol, and several lactones. This study suggested that the aroma of whey powder could comprise compounds originating from milk, compounds generated by the starter culture during cheese making, and compounds formed during the manufacturing process of whey powder.

  5. Phenolic compounds in Ross Sea water

    Science.gov (United States)

    Zangrando, Roberta; Barbaro, Elena; Gambaro, Andrea; Barbante, Carlo; Corami, Fabiana; Kehrwald, Natalie; Capodaglio, Gabriele

    2016-04-01

    Phenolic compounds are semi-volatile organic compounds produced during biomass burning and lignin degradation in water. In atmospheric and paleoclimatic ice cores studies, these compounds are used as biomarkers of wood combustion and supply information on the type of combusted biomass. Phenolic compounds are therefore indicators of paleoclimatic interest. Recent studies of Antarctic aerosols highlighted that phenolic compounds in Antarctica are not exclusively attributable to biomass burning but also derive from marine sources. In order to study the marine contribution to aerosols we developed an analytical method to determine the concentration of vanillic acid, vanillin, p-coumaric acid, syringic acid, isovanillic acid, homovanillic acid, syringaldehyde, acetosyringone and acetovanillone present in dissolved and particle phases in Sea Ross waters using HPLC-MS/MS. The analytical method was validated and used to quantify phenolic compounds in 28 sea water samples collected during a 2012 Ross Sea R/V cruise. The observed compounds were vanillic acid, vanillin, acetovanillone and p-coumaric acid with concentrations in the ng/L range. Higher concentrations of analytes were present in the dissolved phase than in the particle phase. Sample concentrations were greatest in the coastal, surficial and less saline Ross Sea waters near Victoria Land.

  6. IRIS Toxicological Review of Thallium and Compounds ...

    Science.gov (United States)

    Thallium compounds are used in the semiconductor industry, the manufacture of optic lenses and low-melting glass, low-temperature thermometers, alloys, electronic devices, mercury lamps, fireworks, and imitation germs, and clinically as an imaging agent in the diagnosis of certain tumors. EPA's assessment of noncancer health effects and carcinogenic potential of thallium compounds was last prepared and added to the IRIS database between 1988 and 1990. The IRIS program is preparing an assessment that will incorporate current health effects information available for thallium and compounds, and current risk assessment methods. The IRIS assessment for thallium compounds will consist of a Toxicological Review and IRIS Summary. The Toxicological Review is a critical review of the physiochemical and toxicokinetic properties of a chemical, and its toxicity in humans and experimental systems. The assessment will present reference values for the noncancer effects of thallium compounds (RfD and Rfc), and a cancer assessment. The Toxicological Review and IRIS Summary have been subject to Agency review, Interagency review, and external scientific peer review. The final product will reflect the Agency opinion on the overall toxicity of thallium and compounds. EPA is undertaking an Integrated Risk Information System (IRIS) health assessment for thallium and compounds. IRIS is an EPA database containing Agency scientific positions on potential adverse human health effec

  7. Biodegradable compounds: Rheological, mechanical and thermal properties

    Science.gov (United States)

    Nobile, Maria Rossella; Lucia, G.; Santella, M.; Malinconico, M.; Cerruti, P.; Pantani, R.

    2015-12-01

    Recently great attention from industry has been focused on biodegradable polyesters derived from renewable resources. In particular, PLA has attracted great interest due to its high strength and high modulus and a good biocompatibility, however its brittleness and low heat distortion temperature (HDT) restrict its wide application. On the other hand, Poly(butylene succinate) (PBS) is a biodegradable polymer with a low tensile modulus but characterized by a high flexibility, excellent impact strength, good thermal and chemical resistance. In this work the two aliphatic biodegradable polyesters PBS and PLA were selected with the aim to obtain a biodegradable material for the industry of plastic cups and plates. PBS was also blended with a thermoplastic starch. Talc was also added to the compounds because of its low cost and its effectiveness in increasing the modulus and the HDT of polymers. The compounds were obtained by melt compounding in a single screw extruder and the rheological, mechanical and thermal properties were investigated. The properties of the two compounds were compared and it was found that the values of the tensile modulus and elongation at break measured for the PBS/PLA/Talc compound make it interesting for the production of disposable plates and cups. In terms of thermal resistance the compounds have HDTs high enough to contain hot food or beverages. The PLA/PBS/Talc compound can be, then, considered as biodegradable substitute for polystyrene for the production of disposable plates and cups for hot food and beverages.

  8. Molecular basis of biodegradation of chloroaromatic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Sangodkar, U M.X.; Aldrich, T L; Haugland, R A; Johnson, J; Rothmel, R K; Chakrabarty, A M [Illinois Univ., Chicago (USA). Coll. of Medicine; Chapman, P J [Environmental Protection Agency, Gulf Breeze, FL (USA). Microbial Ecology and Biotechnology

    1989-01-01

    Chlorinated aromatic hydrocarbons are widely used in industry and agriculture, and comprise the bulk of environmental pollutants. Although simple aromatic compounds are biodegradable by a variety of degradative pathways, their halogenated counterparts are more resistant to bacterial attack and often necessitate evolution of novel pathways. An understanding of such evolutionary processes is essential for developing genetically improved strains capable of mineralizing highly chlorinated compounds. This article provides an overview of the genetic aspects of dissimilation of chloroaromatic compounds and discusses the potential of gene manipulation to promote enhanced evolution of the degradation pathways. (orig.).

  9. Endocannabinoids, Related Compounds and Their Metabolic Routes

    Directory of Open Access Journals (Sweden)

    Filomena Fezza

    2014-10-01

    Full Text Available Endocannabinoids are lipid mediators able to bind to and activate cannabinoid receptors, the primary molecular targets responsible for the pharmacological effects of the Δ9-tetrahydrocannabinol. These bioactive lipids belong mainly to two classes of compounds: N-acylethanolamines and acylesters, being N-arachidonoylethanolamine (AEA and 2-arachidonoylglycerol (2-AG, respectively, their main representatives. During the last twenty years, an ever growing number of fatty acid derivatives (endocannabinoids and endocannabinoid-like compounds have been discovered and their activities biological is the subject of intense investigations. Here, the most recent advances, from a therapeutic point of view, on endocannabinoids, related compounds, and their metabolic routes will be reviewed.

  10. Antibacterial Compounds from Red Seaweeds (Rhodophyta

    Directory of Open Access Journals (Sweden)

    Noer Kasanah

    2015-07-01

    Full Text Available Seaweeds produce great variety of metabolites benefit for human. Red seaweeds (Rhodophyta are well known as producer of phycocolloids such agar, agarose, carragenan and great variety of secondary metabolites. This review discusses the red algal secondary metabolites with antibacterial activity. The chemical constituents of red algae are steroid, terpenoid, acetogenin and dominated by halogenated compounds mainly brominated compounds. Novel compounds with intriguing skeleton are also reported such as bromophycolides and neurymenolides. In summary, red seaweeds are potential sources for antibacterial agents and can serve as lead in synthesis of new natural medicines.

  11. Degradation of based EPDM dielectric compounds

    International Nuclear Information System (INIS)

    Galembeck, F.

    1988-01-01

    The stability of an EPDM compound used as power cables insulation was studied under various conditions of thermal stress. Changes in the dielectric and tensile strenght of the samples were found after the aging. Samples of the EPDM compound were analysed by spectroscopic (photoacoustic, IR) methods showing alterations in its components: Pb 3 O 4 is reduced to PbO and exsuded paraffin is oxidized. Methane is prevalent in the gaseous mixture released by the heated compound and analysed by Gas Chromatography. (author) [pt

  12. Thermal conductivity of REIn3 compounds

    International Nuclear Information System (INIS)

    Mucha, J

    2006-01-01

    The results of measurements of the thermal conductivity of REIn 3 (RE Pr, Nd, Dy, Ho, Tm) compounds as a function of the temperature in the interval 4-300 K in the absence and in the presence of an external magnetic field of 8 T are presented. Except for PRIn 3 all the compounds are antiferromagnetic. YIn 3 was also measured as a reference compound. The results were analysed in the paramagnetic phase, where an influence of the crystalline electric field on the thermal conductivity was found. Drastic changes in the thermal conductivity were observed and analysed in the vicinity of the Neel temperature and in the antiferromagnetic phases of the compounds. Below the Neel temperature an additional magnon contribution to the thermal conductivity was separated out

  13. SELKIRK'S THEORY OF VERBAL COMPOUNDING: A CRITICAL ...

    African Journals Online (AJOL)

    Selkirk presents her theory of verbal compounding as part of a more general theory ... typical lexicalist vein, words are assigned a dual status (Selkirk 1981: 230), On ..... nonhead and a deverbal head ~s an extremely product~ve process. Con-.

  14. Food applications of natural antimicrobial compounds

    Science.gov (United States)

    Lucera, Annalisa; Costa, Cristina; Conte, Amalia; Del Nobile, Matteo A.

    2012-01-01

    In agreement with the current trend of giving value to natural and renewable resources, the use of natural antimicrobial compounds, particularly in food and biomedical applications, becomes very frequent. The direct addition of natural compounds to food is the most common method of application, even if numerous efforts have been made to find alternative solutions to the aim of avoiding undesirable inactivation. Dipping, spraying, and coating treatment of food with active solutions are currently applied to product prior to packaging as valid options. The aim of the current work is to give an overview on the use of natural compounds in food sector. In particular, the review will gather numerous case-studies of meat, fish, dairy products, minimally processed fruit and vegetables, and cereal-based products where these compounds found application. PMID:23060862

  15. Organolead compounds shown to be genetically active

    Energy Technology Data Exchange (ETDEWEB)

    Ahlberg, J; Ramel, C; Wachtmeister, C A

    1972-01-01

    The purpose of the present investigation was to determine whether alkyllead compounds would cause a genetic effect similar to that caused by alkyl mercury compounds. Experiments were conducted on Allium cepa (onion) in order to determine the effect of lead compounds on the spindle fiber mechanism. Results indicate that disturbances of the spindle fiber mechanism occur even at very low concentrations. The lowest concentration at which such effects are observed seems to be between 10/sup -6/ and 10/sup -7/ M for the organic compounds. Although no effect can be observed on the spindle fibers at lower dosages, the mitotic index is changed even at a dose of 10/sup -7/ M with dimethyllead. A preliminary experiment was made on Drosophila with triethyllead in order to investigate whether the effects which were observed on mitoses in Allium would also be observed in a meiotic cell system in an animal.

  16. Thermodynamic Analysis of Ionic Compounds: Synthetic Applications.

    Science.gov (United States)

    Yoder, Claude H.

    1986-01-01

    Shows how thermodynamic cycles can be used to understand trends in heats of formation and aqueous solubilities and, most importantly, how they may be used to choose synthetic routes to new ionic compounds. (JN)

  17. Expatriate Compound Living: An Ethnographic Field Study

    DEFF Research Database (Denmark)

    Lauring, Jakob; Selmer, Jan

    2009-01-01

    In certain countries, closed expatriate compounds have developed.  They serve to provide resident expatriates and accompanying family members with a comfortable and safe environment. Unfortunately, not much is known about compound life since associated empirical research is scarce. Through...... ethnographic field-work methodology, including interviews and participant observation during a period of three months, this exploratory study investigated 16 Danish business expatriates of a large Danish corporation and their families living in the same compound in Saudi Arabia. They shared their spare time...... and the expatriates had the same working hours in the same subsidiary. Results show that a Danish national group was established and maintained. This in-group dominated life in the compound and at work it may have contributed to the perceptual bias and discriminatory behaviour demonstrated by the Danish expatriates...

  18. Pyridinium Oxime Compounds as Antimicrobial Agents

    National Research Council Canada - National Science Library

    Berger, Bradley J; Knodel, Marvin H

    2007-01-01

    ... (as a model for Leishmania spp.). In general, the compounds were found to have little to no antimicrobial effect, with KJD-2-11, a thiourea derivative, being the most active in all the test systems.

  19. Techniques for Analysis of Plant Phenolic Compounds

    Directory of Open Access Journals (Sweden)

    Thomas H. Roberts

    2013-02-01

    Full Text Available Phenolic compounds are well-known phytochemicals found in all plants. They consist of simple phenols, benzoic and cinnamic acid, coumarins, tannins, lignins, lignans and flavonoids. Substantial developments in research focused on the extraction, identification and quantification of phenolic compounds as medicinal and/or dietary molecules have occurred over the last 25 years. Organic solvent extraction is the main method used to extract phenolics. Chemical procedures are used to detect the presence of total phenolics, while spectrophotometric and chromatographic techniques are utilized to identify and quantify individual phenolic compounds. This review addresses the application of different methodologies utilized in the analysis of phenolic compounds in plant-based products, including recent technical developments in the quantification of phenolics.

  20. using stereochemistry models in teaching organic compounds

    African Journals Online (AJOL)

    Preferred Customer

    The purpose of the study was to find out the effect of stereochemistry models on students' ... consistent with the names given to organic compounds. Some of ... Considering class level, what is the performance of the students in naming organic.

  1. Chemical Reductive Transformations of Synthetic Organic Compounds

    National Research Council Canada - National Science Library

    Peyton, Gary

    2001-01-01

    Advanced Oxidation Processes (AOPs) can be used to selectively remove DNT (2,4-dinitrotoluene) from a complex waste stream by adding a precursor compound such as ethanol which forms a reducing radical upon reaction with hydroxyl radical...

  2. Food applications of natural antimicrobial compounds

    Directory of Open Access Journals (Sweden)

    Matteo Alessandro eDel Nobile

    2012-08-01

    Full Text Available In agreement with the current trend of giving value to natural and renewable resources, the use of natural antimicrobial compounds, particularly in food and biomedical applications, becomes very frequent. The direct addition of natural compounds to food is the most common method of application, even if numerous efforts have been made to find alternative solutions to the aim of avoiding undesirable inactivation. Dipping, spraying and coating treatment of food with active solutions are currently applied to product prior to packaging as valid options. The aim of the current work is to give an overview on the use of natural compounds in food sector. In particular, the review will gather numerous case-studies of meat, fish, dairy products, minimally processed fruit and vegetables and cereal-based products where these compounds found application.

  3. New heterocyclic compounds: Synthesis and antitrypanosomal properties.

    Science.gov (United States)

    Pomel, S; Dubar, F; Forge, D; Loiseau, P M; Biot, C

    2015-08-15

    Three new series of quinoline, quinolone, and benzimidazole derivatives were synthesized and evaluated in vitro against Trypanosoma brucei gambiense. In the quinoline series, the metallo antimalarial drug candidate (ferroquine, FQ) and its ruthenium analogue (ruthenoquine, RQ, compound 13) showed the highest in vitro activities with IC50 values around 0.1 μM. Unfortunately, both compounds failed to cure Trypanosoma brucei brucei infected mice in vivo. The other heterocyclic compounds were active in vitro with IC50 values varying from 0.8 to 34 μM. One of the most interesting results was a fluoroquinolone derivative (compound 2) that was able to offer a survival time of 8 days after a treatment at the single dose of 100 μmol/kg by intraperitoneal route. Although no clear-cut structure-activity relationships emerged, further pharmacomodulations are worth to be developed in this series. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Three coordination compounds based on benzene tetracarboxylate ...

    Indian Academy of Sciences (India)

    YUNLONG WU

    nescence, considerable attention has been focused on the construction of coordination .... measurements were performed on ground powder samples at .... Figure 2. (a) Coordination environment of Co1 ion in compound 2. (b) Coordination.

  5. Food applications of natural antimicrobial compounds.

    Science.gov (United States)

    Lucera, Annalisa; Costa, Cristina; Conte, Amalia; Del Nobile, Matteo A

    2012-01-01

    In agreement with the current trend of giving value to natural and renewable resources, the use of natural antimicrobial compounds, particularly in food and biomedical applications, becomes very frequent. The direct addition of natural compounds to food is the most common method of application, even if numerous efforts have been made to find alternative solutions to the aim of avoiding undesirable inactivation. Dipping, spraying, and coating treatment of food with active solutions are currently applied to product prior to packaging as valid options. The aim of the current work is to give an overview on the use of natural compounds in food sector. In particular, the review will gather numerous case-studies of meat, fish, dairy products, minimally processed fruit and vegetables, and cereal-based products where these compounds found application.

  6. Stochastic interest rates model in compounding | Galadima ...

    African Journals Online (AJOL)

    Stochastic interest rates model in compounding. ... in finance, real estate, insurance, accounting and other areas of business administration. The assumption that future rates are fixed and known with certainty at the beginning of an investment, ...

  7. Compound Option Pricing under Fuzzy Environment

    Directory of Open Access Journals (Sweden)

    Xiandong Wang

    2014-01-01

    Full Text Available Considering the uncertainty of a financial market includes two aspects: risk and vagueness; in this paper, fuzzy sets theory is applied to model the imprecise input parameters (interest rate and volatility. We present the fuzzy price of compound option by fuzzing the interest and volatility in Geske’s compound option pricing formula. For each α, the α-level set of fuzzy prices is obtained according to the fuzzy arithmetics and the definition of fuzzy-valued function. We apply a defuzzification method based on crisp possibilistic mean values of the fuzzy interest rate and fuzzy volatility to obtain the crisp possibilistic mean value of compound option price. Finally, we present a numerical analysis to illustrate the compound option pricing under fuzzy environment.

  8. Volatile sulfur compounds in tropical fruits

    Directory of Open Access Journals (Sweden)

    Robert J. Cannon

    2018-04-01

    Full Text Available Global production and demand for tropical fruits continues to grow each year as consumers are enticed by the exotic flavors and potential health benefits that these fruits possess. Volatile sulfur compounds (VSCs are often responsible for the juicy, fresh aroma of tropical fruits. This poses a challenge for analytical chemists to identify these compounds as most often VSCs are found at low concentrations in most tropical fruits. The aim of this review is to discuss the extraction methods, enrichment techniques, and instrumentation utilized to identify and quantify VSCs in natural products. This will be followed by a discussion of the VSCs reported in tropical and subtropical fruits, with particular attention to the odor and taste attributes of each compound. Finally, the biogenesis and enzymatic formation of specific VSCs in tropical fruits will be highlighted along with the contribution each possesses to the aroma of their respective fruit. Keywords: Tropical fruits, Volatile sulfur compounds, Extraction methods

  9. Chemistry of tin compounds and environment

    International Nuclear Information System (INIS)

    Ali, S.; Mazhar, M.; Mahmood, S.; Bhatti, M.H.; Chaudhary, M.A.

    1997-01-01

    Of the large volume of tin compounds reported in the literature, possible only 100 are commercially important. Tin compounds are a wide variety of purposes such as catalysts, stabilizers for many materials including polymer, biocidal agents, bactericides, insecticides, fungicides, wood preservatives, acaricides and anti fouling agents in paints, anticancer and antitumour agents, ceramic opacifiers, as textile additives, in metal finishing operations, as food additives and in electro conductive coating. All these applications make the environment much exposed to tin contamination. The application of organotin compounds as biocides account for about 30% of total tin consumption suggesting that the main environmental effects are likely to originate from this sector. Diorgano tins and mono-organo tins are used mainly in plastic industry which is the next big source for environmental pollution. In this presentation all environmental aspects of the use of tin compounds and the recommended preventive measures are discussed. (author)

  10. Characterisation of selected volatile organic compounds in ...

    African Journals Online (AJOL)

    kshale

    2013-05-15

    May 15, 2013 ... have entered the commercial market, both in rural areas ... nation of volatile compounds include: gas chromate- graphy (GC) ... prior to the actual analysis, various extraction methods ..... traditional and industrial 'orujo' spirits.

  11. Agricultural Compounds in Water and Birth Defects.

    Science.gov (United States)

    Brender, Jean D; Weyer, Peter J

    2016-06-01

    Agricultural compounds have been detected in drinking water, some of which are teratogens in animal models. The most commonly detected agricultural compounds in drinking water include nitrate, atrazine, and desethylatrazine. Arsenic can also be an agricultural contaminant, although arsenic often originates from geologic sources. Nitrate has been the most studied agricultural compound in relation to prenatal exposure and birth defects. In several case-control studies published since 2000, women giving birth to babies with neural tube defects, oral clefts, and limb deficiencies were more likely than control mothers to be exposed to higher concentrations of drinking water nitrate during pregnancy. Higher concentrations of atrazine in drinking water have been associated with abdominal defects, gastroschisis, and other defects. Elevated arsenic in drinking water has also been associated with birth defects. Since these compounds often occur as mixtures, it is suggested that future research focus on the impact of mixtures, such as nitrate and atrazine, on birth defects.

  12. Atmospheric Chemistry of Micrometeoritic Organic Compounds

    Science.gov (United States)

    Kress, M. E.; Belle, C. L.; Pevyhouse, A. R.; Iraci, L. T.

    2011-01-01

    Micrometeorites approx.100 m in diameter deliver most of the Earth s annual accumulation of extraterrestrial material. These small particles are so strongly heated upon atmospheric entry that most of their volatile content is vaporized. Here we present preliminary results from two sets of experiments to investigate the fate of the organic fraction of micrometeorites. In the first set of experiments, 300 m particles of a CM carbonaceous chondrite were subject to flash pyrolysis, simulating atmospheric entry. In addition to CO and CO2, many organic compounds were released, including functionalized benzenes, hydrocarbons, and small polycyclic aromatic hydrocarbons. In the second set of experiments, we subjected two of these compounds to conditions that simulate the heterogeneous chemistry of Earth s upper atmosphere. We find evidence that meteor-derived compounds can follow reaction pathways leading to the formation of more complex organic compounds.

  13. Diazo Compounds: Versatile Tools for Chemical Biology

    OpenAIRE

    Mix, Kalie A.; Aronoff, Matthew R.; Raines, Ronald T.

    2016-01-01

    Diazo groups have broad and tunable reactivity. That and other attributes endow diazo compounds with the potential to be valuable reagents for chemical biologists. The presence of diazo groups in natural products underscores their metabolic stability and anticipates their utility in a biological context. The chemoselectivity of diazo groups, even in the presence of azido groups, presents many opportunities. Already, diazo compounds have served as chemical probes and elicited novel modificatio...

  14. Medical Applications and Toxicities of Gallium Compounds

    Directory of Open Access Journals (Sweden)

    Christopher R. Chitambar

    2010-05-01

    Full Text Available Over the past two to three decades, gallium compounds have gained importance in the fields of medicine and electronics. In clinical medicine, radioactive gallium and stable gallium nitrate are used as diagnostic and therapeutic agents in cancer and disorders of calcium and bone metabolism. In addition, gallium compounds have displayed anti-inflammatory and immunosuppressive activity in animal models of human disease while more recent studies have shown that gallium compounds may function as antimicrobial agents against certain pathogens. In a totally different realm, the chemical properties of gallium arsenide have led to its use in the semiconductor industry. Gallium compounds, whether used medically or in the electronics field, have toxicities. Patients receiving gallium nitrate for the treatment of various diseases may benefit from such therapy, but knowledge of the therapeutic index of this drug is necessary to avoid clinical toxicities. Animals exposed to gallium arsenide display toxicities in certain organ systems suggesting that environmental risks may exist for individuals exposed to this compound in the workplace. Although the arsenic moiety of gallium arsenide appears to be mainly responsible for its pulmonary toxicity, gallium may contribute to some of the detrimental effects in other organs. The use of older and newer gallium compounds in clinical medicine may be advanced by a better understanding of their mechanisms of action, drug resistance, pharmacology, and side-effects. This review will discuss the medical applications of gallium and its mechanisms of action, the newer gallium compounds and future directions for development, and the toxicities of gallium compounds in current use.

  15. Measurement of lead compound in stack gas

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Y; Hori, M; Tanikawa, N

    1979-01-01

    The concentration and particle-size distribution of lead compounds in the exhaust gas from various stationary sources are examined. The stationary sources concern lead production from battery scraps, lead smelting of cable mold, steel production from iron scraps, plastic combustion furnace, and a heavy oil boiler. A lead concentration of 0.2-100 mg/cu m in exhaust gas is detected. Furthermore, exhaust gas lead compounds are affected by the raw materials used.

  16. Enthalpies of vaporization of organometallic compounds

    International Nuclear Information System (INIS)

    Kuznetsov, N.T.; Sevast'yanov, V.G.; Mitin, V.A.; Krasnodubskaya, S.V.; Zakharov, L.N.; Domrachev, G.A.; AN SSSR, Gor'kij. Inst. Khimii)

    1987-01-01

    A possibility to use the method of additive schemes for the calculation of vaporizaton enthalpies of uranium organometallic compounds is discussed while comparing the values obtained using the method with experimental data. The possibility of apriori evaluation of evaporation enthalpy values of different uranium compounds using the method of additive schemes and structural characteristics of molecules, such as the sum of ligand solid angles, is shown

  17. Two new compounds from Xanthium strumarium.

    Science.gov (United States)

    Yin, Rong-Hua; Bai, Xue; Feng, Tao; Dong, Ze-Jun; Li, Zheng-Hui; Liu, Ji-Kai

    2016-01-01

    One new lignan, fructusol A (1), and one new thiazine derivative, 2-hydroxy-xanthiazone (2), along with eight known ones, were isolated from the seeds of Xanthium strumarium. The structures of new compounds were elucidated on the basis of extensive spectroscopic methods. Meanwhile, compounds 1-3 were tested for their antifungal activities against Candida albicans (ATCC 10231) in vitro. No one showed obvious inhibitions (MIC90 > 128 μg/ml).

  18. Diffraction limit of refractive compound lens

    International Nuclear Information System (INIS)

    Kolchevsky, N.N.; Petrov, P.V.

    2015-01-01

    A compound X-ray and neutron lenses is an array of lenses with a common axis. The resolution limited by aberration and by diffraction. Diffraction limit comes from theory based on absorption aperture of the compound refractive lenses. Beam passing through transparent lenses form Airy pattern. Results of calculation of diffraction resolution limit for non-transparent X-ray and neutron lenses are discussed. (authors)

  19. Veterinary Compounding: Regulation, Challenges, and Resources

    OpenAIRE

    Davidson, Gigi

    2017-01-01

    The spectrum of therapeutic need in veterinary medicine is large, and the availability of approved drug products for all veterinary species and indications is relatively small. For this reason, extemporaneous preparation, or compounding, of drugs is commonly employed to provide veterinary medical therapies. The scope of veterinary compounding is broad and focused primarily on meeting the therapeutic needs of companion animals and not food-producing animals in order to avoid human exposure to ...

  20. Respiratory carcinogenicity assessment of soluble nickel compounds.

    OpenAIRE

    Oller, Adriana R

    2002-01-01

    The many chemical forms of nickel differ in physicochemical properties and biological effects. Health assessments for each main category of nickel species are needed. The carcinogenicity assessment of water-soluble nickel compounds has proven particularly difficult. Epidemiologic evidence indicates an association between inhalation exposures to nickel refinery dust containing soluble nickel compounds and increased risk of respiratory cancers. However, the nature of this association is unclear...

  1. Organic astatine compounds, their preparation and properties

    Energy Technology Data Exchange (ETDEWEB)

    Vasaros, L; Berei, K

    1985-01-01

    Aromatic astatine compounds of possible medical application were prepared by high energy substitutions, by astatine-halogen, and by electrophil astatine-hydrogen substitutions at the Joint Institute of Nuclear Researches, Dubna. Physico-chemical properties of organic astatine compounds such as boiling point and evaporation heat, and the refraction and dissociation energy of carbon-astatine bonds were determined experimentally by gas chromatography. The results are compared with extrapolated data. (V.N.). 41 refs.; 7 figs.; 5 tables.

  2. Composition of atmospheric precipitation. I. Nitrogen compounds

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, E

    1952-01-01

    The purpose of this paper is to present a survey of published data on chemical analysis of atmospheric precipitation to discuss different cycles proposed for inorganic compounds in atmospheric precipitation and, finally, to assess the importance of these compounds from different points of view. Investigations of rainwater with a view to determine atmospheric pollution in industrial areas are mentioned incidentally but no results are detailed.

  3. Compound transstyloid, transscaphoid, perilunate fracture dislocation

    Directory of Open Access Journals (Sweden)

    Nadeem Ali

    2013-01-01

    Full Text Available Compound fracture dislocations of proximal carpal bones are very rare. We report a 26-year-old male, Defense personnel by profession, who sustained a compound Gustilo Anderson type IIIA transstyloid, transscaphoid, perilunate dislocation. The patient underwent primary proximal row carpectomy and stabilization with uni-planar, uni-lateral external fixator, and K-Wires. On follow-up after a year, the patient had almost negligible range of motion around wrist without any significant discomfort.

  4. Carbonyl Compounds Generated from Electronic Cigarettes

    Directory of Open Access Journals (Sweden)

    Kanae Bekki

    2014-10-01

    Full Text Available Electronic cigarettes (e-cigarettes are advertised as being safer than tobacco cigarettes products as the chemical compounds inhaled from e-cigarettes are believed to be fewer and less toxic than those from tobacco cigarettes. Therefore, continuous careful monitoring and risk management of e-cigarettes should be implemented, with the aim of protecting and promoting public health worldwide. Moreover, basic scientific data are required for the regulation of e-cigarette. To date, there have been reports of many hazardous chemical compounds generated from e-cigarettes, particularly carbonyl compounds such as formaldehyde, acetaldehyde, acrolein, and glyoxal, which are often found in e-cigarette aerosols. These carbonyl compounds are incidentally generated by the oxidation of e-liquid (liquid in e-cigarette; glycerol and glycols when the liquid comes in contact with the heated nichrome wire. The compositions and concentrations of these compounds vary depending on the type of e-liquid and the battery voltage. In some cases, extremely high concentrations of these carbonyl compounds are generated, and may contribute to various health effects. Suppliers, risk management organizations, and users of e-cigarettes should be aware of this phenomenon.

  5. Ultrasound assisted extraction of bioactive compounds

    Directory of Open Access Journals (Sweden)

    Helena Drmić

    2010-01-01

    Full Text Available Many novel and innovative techniques are nowadays researched and explored in order to replace or improve classical, thermal processing technologies. One of newer technique is technique of minimal food processing, under what we assume ultrasound processing. Ultrasound technology can be very useful for minimal food processing because transmission of acoustic energy through product is fast and complete, which allows reduction in total processing time, and therefore lower energy consumption. Industrial processing is growing more and more waste products, and in desire of preservation of global recourses and energy efficiency, several ways of active compounds extraction techniques are now explored. The goal is to implement novel extraction techniques in food and pharmaceutical industry as well in medicine. Ultrasound assisted extraction of bioactive compounds offers increase in yield, and reduction or total avoiding of solvent usage. Increase in temperature of treatment is controlled and restricted, thereby preserving extracted bioactive compounds. In this paper, several methods of ultrasound assisted extraction of bioactive compounds from plant materials are shown. Ultrasound can improve classic mechanisms of extraction, and thereby offer novel possibilities of commercial extraction of desired compounds. Application of sonochemistry (ultrasound chemistry is providing better yield in desired compounds and reduction in treatment time.

  6. Chemical Looping Pilot Plant Results Using a Nickel-Based Oxygen Carrier Résultats de l’expérimentation sur un pilote opérant en boucle chimique avec un matériau transporteur d’oxygène à base de nickel

    Directory of Open Access Journals (Sweden)

    Pröll T.

    2011-04-01

    Full Text Available A chemical looping pilot plant was designed, built and operated with a design fuel power of 120 kW (lower heating value, natural gas. The system consists of two Circulating Fluidized Bed (CFB reactors. Operating results are presented and evaluated for a highly reactive nickel-based oxygen carrier, total system inventory 65 kg. The performance in fuel conversion achieved is in the range of 99.8% (CH4 conversion and 92% (CO2 yield. In chemical looping reforming operation, it can be reported that thermodynamic equilibrium is reached in the fuel reactor and that all oxygen is absorbed in the air reactor as soon as the global stoichiometric air/fuel ratio is below 1 and the air reactor temperature is 900°C or more. Even though pure natural gas (98.6 vol.% CH4 without steam addition was fed to the fuel reactor, no carbon formation has been found as long as the global stoichiometric air/fuel ratio was larger than 0.4. Based on the experimental findings and on the general state of the art, it is concluded that niche applications such as industrial steam generation from natural gas or CO2-ready coupled production of H2 and N2 can be interesting pathways for immediate scale-up of the technology. Un pilote d’étude de la combustion en boucle chimique d’une puissance thermique de 120 kW a été dimensionné, construit et opéré. Il est constitué de deux lits circulants interconnectés. Les résultats d’opération qui sont présentés ont été obtenus avec un matériau transporteur d’oxygène très réactif à base de nickel. L’inventaire total du matériau est de 65 kg dans le pilote. La conversion du méthane atteinte est voisine de 99,8 % et le rendement en CO2 est de 92 %. Lorsqu’on opère en mode de reformage, l’équilibre thermodynamique est atteint dans le réacteur fioul. Tout l’oxygène est capté dans le réacteur air dès que le rapport stoechiométrique entre l’air et le méthane est inférieur à 1 et que la temp

  7. Compounds interaction on biodegradation of toluene and methyl ...

    African Journals Online (AJOL)

    MEK) mixtures in a composite bead biofilter was investigated. The biodegradation rate of two compounds in the exponential growth phase and stationary phase for the single compound and two compounds mixing systems was determined.

  8. Analyse statistique et effet des traitements chimique sur le ...

    African Journals Online (AJOL)

    The results show that the chemical treatment improves the mechanical properties (failure stress and Young's modulus) and the optimum was found for the fibres treated with 2% concentration of NaOH for 48h immersion. XRD tests were performed to determine the degree of crystallinity of the treated and untreated fibres.

  9. Analyse statistique et effet des traitements chimique sur le ...

    African Journals Online (AJOL)

    Administrateur

    mechanical behavior of fibres from date-palm fruit branches. Abderrezak ...... Physical, mechanical and durability characteristics of date palm frond stalks as reinforcement in structural concrete. Cement Composites and Lightweight Concrete;.

  10. INVENTAIRE DE L'ENTOMOFAUNE ET LUTTE CHIMIQUE ...

    African Journals Online (AJOL)

    SECRETARIAT

    Coléoptères. Sur certaines plantes, des feuilles présentant un aspect de filet ou de grillage occasionné par des criquets (Zonocerus variegatus). Certaines feuilles sont recro- quevillées suite aux piqûres de fourmis. (Camponotus sp.) et des pucerons. Figure 1 : Vue d'un pied mort de Lippia multiflora causés par les termites.

  11. Variation saisonnière de la composition chimique de ...

    African Journals Online (AJOL)

    The chimical composition of Gymnogongrus patens J. Agardh (Rhodophyta, Phyllophoracea) has been analyzed on samples collected monthly on a one year cycle from April 2002 to March 2003 on Méhdia beach (North west Atlantic caost of Morocco). The analysis of chemical composition of thallus shows that the content ...

  12. 82 Evaluation hydro-chimique des eaux souterraines en milieu ...

    African Journals Online (AJOL)

    AKA BOKO

    determined in water samples: pH, C.E (electric conductivity), total dissolved solids ... nitrate (NO3-), total hardness (THt), total alcalinity (TAC), fluoride (F-), ortho ... souterraines est la plus élevée à cause de l'infiltration des eaux de surface (eau ...

  13. etude physico-chimique et parasitologique des eaux usees

    African Journals Online (AJOL)

    AISA

    pollution ont été relativement faibles, comparativement à la moyenne des concentrations habituellement rencontrées pour les ... Mots clés : Pollution, eaux usées, physico-chimie, Helminthes, lac Fouarat, Maroc. ...... Paris, 1383 p. SDNAL.

  14. Air sparging of organic compounds in groundwater

    International Nuclear Information System (INIS)

    Hicks, P.M.

    1994-01-01

    Soils and aquifers containing organic compounds have been traditionally treated by excavation and disposal of the soil and/or pumping and treating the groundwater. These remedial options are often not practical or cost effective solutions. A more favorable alternative for removal of the adsorbed/dissolved organic compounds would be an in situ technology. Air sparging will remove volatile organic compounds from both the adsorbed and dissolved phases in the saturated zone. This technology effectively creates a crude air stripper below the aquifer where the soil acts as the ''packing''. The air stream that contacts dissolved/adsorbed phase organics in the aquifer induces volatilization. A case history illustrates the effectiveness of air sparging as a remedial technology for addressing organic compounds in soil and groundwater. The site is an operating heavy equipment manufacturing facility in central Florida. The soil and groundwater below a large building at the facility was found to contain primarily diesel type petroleum hydrocarbons during removal of underground storage tanks. The organic compounds identified in the groundwater were Benzene, Xylenes, Ethylbenzene and Toluenes (BTEX), Methyl tert-Butyl Ether (MTBE) and naphthalenes in concentrations related to diesel fuel

  15. Determination of arsenic compounds in earthworms

    Energy Technology Data Exchange (ETDEWEB)

    Geiszinger, A.; Goessler, W.; Kuehnelt, D.; Kosmus, W. [Karl-Franzens-Univ., Graz (Austria). Inst. for Analytical Chemistry; Francesconi, K. [Odense Univ. (Denmark). Inst. of Biology

    1998-08-01

    Earthworms and soil collected from six sites in Styria, Austria, were investigated for total arsenic concentrations by ICP-MS and for arsenic compounds by HPLC-ICP-MS. Total arsenic concentrations ranged from 3.2 to 17.9 mg/kg dry weight in the worms and from 5.0 to 79.7 mg/kg dry weight in the soil samples. There was no strict correlation between the total arsenic concentrations in the worms and soil. Arsenic compounds were extracted from soil and a freeze-dried earthworm sample with a methanol/water mixture (9:1, v/v). The extracts were evaporated to dryness, redissolved in water, and chromatographed on an anion- and a cation-exchange column. Arsenic compounds were identified by comparison of the retention times with known standards. Only traces of arsenic acid could be extracted from the soil with the methanol/water (9:1, v/v) mixture. The major arsenic compounds detected in the extracts of the earthworms were arsenous acid and arsenic acid. Arsenobetaine was present as a minor constituent, and traces of dimethylarsinic acid were also detected. Two dimethylarsinoyltribosides were also identified in the extracts by co-chromatography with standard compounds. This is the first report of the presence of dimethylarsinoylribosides in a terrestrial organism. Two other minor arsenic species were present in the extract, but their retention times did not match with the retention times of the available standards.

  16. Arsenic compounds in a marine food chain

    Energy Technology Data Exchange (ETDEWEB)

    Goessler, W.; Irgolic, K.J.; Kuehnelt, D.; Schlagenhaufen, C. [Institute for Analytical Chemistry, Karl-Franzens-Universitaet Graz, Universitaetsplatz 1, A-8010 Graz (Austria); Maher, W. [CRC for Freshwater Ecology, University of Canberra, PO Box 1, Belconnen ACT. 2616 (Australia); Kaise, T. [Laboratory of Environmental Chemistry, School of Life Science, University of Pharmacy and Life Science, 1432-1 Horinouchi, Hachijoji, Tokyo 192-03 (Japan)

    1997-10-01

    A three-organism food chain within a rock pool at Rosedale, NSW, Australia, was investigated with respect to arsenic compounds by high performance liquid chromatography - hydraulic high pressure nebulization - inductively coupled plasma mass spectrometry (HPLC-HHPN-ICP-MS). Total arsenic concentration was determined in the seaweed Hormosira banksii (27.2 {mu}g/g dry mass), in the gastropod Austrocochlea constricta (74.4 {mu}g/g dry mass), which consumes the seaweed, and in the gastropod Morula marginalba (233 {mu}g/g dry mass), which eats Austrocochlea constricta. The major arsenic compounds in the seaweed were (2`R)-dimethyl[1-O-(2`,3`-dihydroxypropyl)-5-deoxy-{beta}-d-ribofuranos-5-yl]arsine oxide and an unidentified compound. The herbivorous gastropod Austrocochlea constricta transformed most of the arsenic taken up with the seaweed to arsenobetaine. Traces of arsenite, arsenate, dimethylarsinic acid, arsenocholine, the tetramethylarsonium cation, and several unknown arsenic compounds were detected. Arsenobetaine accounted for 95% of the arsenic in the carnivorous gastropod Morula marginalba. In Morula marginalba the concentration of arsenocholine was higher, and the concentrations of the minor arsenic compounds lower than in the herbivorous gastropod Austrocochlea constricta. (orig.) With 4 figs., 1 tab., 13 refs.

  17. Process for production of a borohydride compound

    Science.gov (United States)

    Allen, Nathan Tait; Butterick, III, Robert; Chin, Arthur Achhing; Millar, Dean Michael; Molzahn, David Craig

    2014-08-19

    A process for production of a borohydride compound M(BH.sub.4).sub.y. The process has three steps. The first step combines a compound of formula (R.sup.1O).sub.yM with aluminum, hydrogen and a metallic catalyst containing at least one metal selected from the group consisting of titanium, zirconium, hafnium, niobium, vanadium, tantalum and iron to produce a compound of formula M(AlH.sub.3OR.sup.1).sub.y, wherein R.sup.1 is phenyl or phenyl substituted by at least one alkyl or alkoxy group; M is an alkali metal, Be or Mg; and y is one or two; wherein the catalyst is present at a level of at least 200 ppm based on weight of aluminum. The second step combines the compound of formula M(AlH.sub.3OR.sup.1).sub.y with a borate, boroxine or borazine compound to produce M(BH.sub.4).sub.y and a byproduct mixture containing alkali metal and aluminum aryloxides. The third step separates M(BH.sub.4).sub.y from the byproduct mixture.

  18. In vitro disposition profiling of heterocyclic compounds.

    Science.gov (United States)

    Keemink, Janneke; Wuyts, Benjamin; Nicolaï, Johan; Jonghe, Steven De; Stella, Alessandro; Herdewijn, Piet; Augustijns, Patrick; Annaert, Pieter

    2015-08-01

    Compound libraries that are screened for biological activity commonly contain heterocycles. Besides potency, drug-like properties need to be evaluated to ensure in vivo efficacy of test compounds. In this context, we determined hepatic and intestinal disposition profiles for 17 heterocyclic compounds. All studied compounds showed rapid uptake in suspended rat hepatocytes, whereas metabolism was poor and the rate-limiting step in hepatic elimination. In vitro assays demonstrated a relatively low solubility and high intestinal permeability. Based on these in vitro data, heterocycles were categorized in the biopharmaceutics classification system (BCS) and the biopharmaceutics drug disposition classification system (BDDCS) to predict disposition characteristics before clinical data are available. Our findings emphasized the importance to use hepatocytes in addition to microsomes to study metabolism, since the latter lack non-microsomal enzymes and cellular context. Moreover, intracellular exposure should be considered to gain insight in the relevant fraction of the compound available at the enzymatic site. Finally, the study reveals discrepancies associated with the classification of heterocycles in BCS versus BDDCS. These probably originate from the binary character of both systems. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Behaviour of organic sulfur compounds in HPLC

    International Nuclear Information System (INIS)

    Freyholdt, T.

    1982-01-01

    The retention behaviour of organic sulfur compounds in the reverse-bonded-phase chromatography is characterized by determining the retention indices according to Kovats. The results of these studies show that the solubility of organic compounds in the eluting agent and the molar sorption surfaces of the solutes are the main factors determining the retention behaviour. Knowledge of the retention indices of above-mentioned compounds allows a quick interpretation of chromatograms obtained through a product analysis of γ-irradiated aqueous solutions of organic sulfur compounds. Dithia compounds of the type CH 3 -S-(CH 2 )sub(n)-S-Ch 3 (1 1. 2,4-Dithiapentane (n = 1) however will yield primarily monothio-S-methyl formate as a stable end product. The formation of oxygenic reaction products proceeds via sulfur-centred radical kations. Spin trapping experiments with nitroxyl radicals show that it is possible to trap radiation-chemically produced radicals of sulfurous substrates, but the thus obtained adducts with half-life periods of 4-5 min. cannot be identified by means of NMR, IR or mass spectroscopy. (orig.) [de

  20. Evolutionary Structure Prediction of Stoichiometric Compounds

    Science.gov (United States)

    Zhu, Qiang; Oganov, Artem

    2014-03-01

    In general, for a given ionic compound AmBn\\ at ambient pressure condition, its stoichiometry reflects the valence state ratio between per chemical specie (i.e., the charges for each anion and cation). However, compounds under high pressure exhibit significantly behavior, compared to those analogs at ambient condition. Here we developed a method to solve the crystal structure prediction problem based on the evolutionary algorithms, which can predict both the stable compounds and their crystal structures at arbitrary P,T-conditions, given just the set of chemical elements. By applying this method to a wide range of binary ionic systems (Na-Cl, Mg-O, Xe-O, Cs-F, etc), we discovered a lot of compounds with brand new stoichimetries which can become thermodynamically stable. Further electronic structure analysis on these novel compounds indicates that several factors can contribute to this extraordinary phenomenon: (1) polyatomic anions; (2) free electron localization; (3) emergence of new valence states; (4) metallization. In particular, part of the results have been confirmed by experiment, which warrants that this approach can play a crucial role in new materials design under extreme pressure conditions. This work is funded by DARPA (Grants No. W31P4Q1210008 and W31P4Q1310005), NSF (EAR-1114313 and DMR-1231586).

  1. Reflectance spectroscopy of organic compounds: 1. Alkanes

    Science.gov (United States)

    Clark, R.N.; Curchin, J.M.; Hoefen, T.M.; Swayze, G.A.

    2009-01-01

    Reflectance spectra of the organic compounds comprising the alkane series are presented from the ultraviolet to midinfrared, 0.35 to 15.5 /??m. Alkanes are hydrocarbon molecules containing only single carbon-carbon bonds, and are found naturally on the Earth and in the atmospheres of the giant planets and Saturn's moon, Titan. This paper presents the spectral properties of the alkanes as the first in a series of papers to build a spectral database of organic compounds for use in remote sensing studies. Applications range from mapping the environment on the Earth, to the search for organic molecules and life in the solar system and throughout the. universe. We show that the spectral reflectance properties of organic compounds are rich, with major diagnostic spectral features throughout the spectral range studied. Little to no spectral change was observed as a function of temperature and only small shifts and changes in the width of absorption bands were observed between liquids and solids, making remote detection of spectral properties throughout the solar system simpler. Some high molecular weight organic compounds contain single-bonded carbon chains and have spectra similar to alkanes even ' when they fall into other families. Small spectral differences are often present allowing discrimination among some compounds, further illustrating the need to catalog spectral properties for accurate remote sensing identification with spectroscopy.

  2. Electronic structure of A15 compounds

    International Nuclear Information System (INIS)

    Pickett, W.E.

    1980-01-01

    For the past twenty-five years compounds with the A15 crystal structure have dominated the class of high temperature superconductors. The crystal structure of an A15 compound A 3 B is cubic (space group O/sub h/ 3 ). However, the site symmetry (D/sub 2d/) of the A atoms is much lower than cubic, an unusual occurrence in cubic binary compounds. Variations on this theme have supplied the basis of many theoretical models of the anomalous temperature (T) dependence of normal state properties and the low temperature cubic reversible tetragonal structural transformations which accompany high values of T/sub c/ in A15 compounds. In this paper results of self-consistent pseudopotential band structure calculations are used to assess some important aspects of the unique and unusual behavior in A15 compounds: (1) the role of the B atom in determining the overall electronic structure will be shown to be important; (2) the effect of the low site symmetry of the A atom on the charge density and potential will be assessed; and (3) the bonding will be shown to be metallic-covalent with no significant A-B charge transfer

  3. Diazo compounds in continuous-flow technology.

    Science.gov (United States)

    Müller, Simon T R; Wirth, Thomas

    2015-01-01

    Diazo compounds are very versatile reagents in organic chemistry and meet the challenge of selective assembly of structurally complex molecules. Their leaving group is dinitrogen; therefore, they are very clean and atom-efficient reagents. However, diazo compounds are potentially explosive and extremely difficult to handle on an industrial scale. In this review, it is discussed how continuous flow technology can help to make these powerful reagents accessible on large scale. Microstructured devices can improve heat transfer greatly and help with the handling of dangerous reagents safely. The in situ formation and subsequent consumption of diazo compounds are discussed along with advances in handling diazomethane and ethyl diazoacetate. The potential large-scale applications of a given methodology is emphasized. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Decomposition of the compound Atwood machine

    Science.gov (United States)

    Lopes Coelho, R.

    2017-11-01

    Non-standard solving strategies for the compound Atwood machine problem have been proposed. The present strategy is based on a very simple idea. Taking an Atwood machine and replacing one of its bodies by another Atwood machine, we have a compound machine. As this operation can be repeated, we can construct any compound Atwood machine. This rule of construction is transferred to a mathematical model, whereby the equations of motion are obtained. The only difference between the machine and its model is that instead of pulleys and bodies, we have reference frames that move solidarily with these objects. This model provides us with the accelerations in the non-inertial frames of the bodies, which we will use to obtain the equations of motion. This approach to the problem will be justified by the Lagrange method and exemplified by machines with six and eight bodies.

  5. [Phenolic compounds in branches of Tamarix rasissima].

    Science.gov (United States)

    Li, Juan; Li, Wei-Qi; Zheng, Ping; Wang, Rui; Yu, Jian-Qiang; Yang, Jian-Hong; Yao, Yao

    2014-06-01

    To study the chemical constituents of the branches of Tamarix rasissima, repeated silica gel column chromatography, Sephadex LH-20 chromatography and recrystallization were applied for chemical constituents isolation and purification. Ten phenolic compounds were isolated from the n-BuOH fraction and their structures were elucidated by physical properties and spectra analysis such as UV, ESI-MS and NMR as monodecarboxyellagic acid (1), ellagic acid (2), 3, 3'-di-O-methylellagic acid (3), 3, 3'-di-O-methylellagic acid-4-O-beta-D-glucopyranoside (4), 3, 3'-di-O-methylellagic acid-4'-O-alpha-D-arabinfuranoside (5), ferulic acid (6), isoferulic acid (7), caffeic acid (8), 4-O-acetyl-caffeic acid (9), and 4-methyl-1, 2-benzenediol (10). All compounds except for isoferulic acid were isolated firstly from this plant except for isoferulic acid, and compounds 5, 9 and 10 were obtained from Tamarix genus for the first time.

  6. Spontaneous magnetoelastic effects in gadolinium compounds

    International Nuclear Information System (INIS)

    Lindbaum, A.; Rotter, M.

    2002-01-01

    Full text: This poster is a short summary of a recently published handbook chapter, where the spontaneous magnetoelastic effects in Gd compounds are reviewed showing that the strain dependence of the magnetic exchange interactions leads to significant effects. These effects are equal in magnitude to well established single ion contributions in other rare earth compounds with non vanishing orbital momentum (coming from the strain dependence of the crystal field). In some cases the exchange contribution can produce giant magnetostriction (GMS) or induce structural phase transitions. In order to extract the influence of the Gd- Gd exchange interactions, we consider only Gd compounds with partner elements showing no or only weak induced magnetic moments. The current status of the theory is presented and compared to measurements performed by temperature dependent x-ray diffraction and results of dilatometric measurements. (author)

  7. Phenolic Compounds from Belamcanda chinensis Seeds

    Directory of Open Access Journals (Sweden)

    Ying-Ying Song

    2018-03-01

    Full Text Available Two new sucrose derivatives, namely, belamcanosides A (1 and B (2, together with five other known compounds (3−7, were isolated from the seeds of Belamcanda chinensis (L. DC. Their structures were identified based on spectroscopic data. Especially, the absolute configurations of fructose and glucose residues in 1 and 2 were assigned by acid hydrolysis, followed by derivatization and gas chromatography (GC analysis. Among the known compounds, (−-hopeaphenol (3, (+-syringaresinol (4, and quercetin (5, were isolated from B. chinensis for the first time. In addition, biological evaluation of 1 and 2 against cholesterol synthesis and metabolism at the gene level was carried out. The results showed that compounds 1 and 2 could regulate the expression of cholesterol synthesis and metabolism-associated genes, including 3-hydroxy-3-methylglutaryl-coenzyme A reductase (HMGCR, squalene epoxidase (SQLE, low density lipoprotein receptor (LDLR, and sortilin (SORT1 genes in HepG2 cells.

  8. Modern materials based on refractory compounds

    International Nuclear Information System (INIS)

    Kosolapova, T.Ya.

    1979-01-01

    Discussed are the existing methods for synthesizing powders of binary refractory compounds and high-productivity techniques which hold promise as regards the manufacture of highly disperse and pure powders. Plasmochemical synthesis is shown to be an effective method for obtaining practically all carbides, nitrides and borides. A description is given of three main methods for obtaining single crystals of refractory compounds (TiN, TiC, ZrC, ZrB 2 , NbC) fairly perfect in structure and composition. These processes include deposition from vapour-gas phase, melting in arc plasma and crystallization from solutions in metallic melts. The advantages have been shown of the self-propagating high-temperature synthesis of refractory compounds, ensuring the manufacture of products, close in composition to stoichiometric ones simultaneously with forming of items. Mechanical, thermal, abrasive, and resistive characteristics of the above materials are presented

  9. New heterocyclic compounds from Ranunculus ternatus Thunb.

    Science.gov (United States)

    Feng, Zi-Ming; Zhan, Zhi-Lai; Yang, Ya-Nan; Jiang, Jian-Shuang; Zhang, Pei-Cheng

    2017-10-01

    Five new heterocyclic compounds, 5-α-d-fructofuranosylmethyl-furfural (1), 5-β-d-fructofuranosylmethyl-furfural (2), 5-β-d-fructopyranosylmethyl-furfural (3), 4-(2-((2S-2,3-dihydroxypropoxy)methyl)-5-formyl-1H-pyrrol-1-yl)butanoic acid (4), and 3S,4S-4,5,8-trihydroxy-3-(prop-1-en-2-yl)isochroman-1-one (5), were obtained from the root of Ranunculus ternatus Thunb., which is a traditional Chinese anti-tuberculosis medicine. Their structures were elucidated by UV, IR, HRESIMS, NMR data, and the comparison of experimental and calculated electronic circular dichroism (ECD) spectra. Notably, compounds 1-3 are rarely occurring furfural fructosides in natural sources. These heterocyclic compounds could be further studied for the synthetic chemists and pharmacologists due to the source and structural properties. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Bioactive Compounds Found in Brazilian Cerrado Fruits.

    Science.gov (United States)

    Bailão, Elisa Flávia Luiz Cardoso; Devilla, Ivano Alessandro; da Conceição, Edemilson Cardoso; Borges, Leonardo Luiz

    2015-10-09

    Functional foods include any natural product that presents health-promoting effects, thereby reducing the risk of chronic diseases. Cerrado fruits are considered a source of bioactive substances, mainly phenolic compounds, making them important functional foods. Despite this, the losses of natural vegetation in the Cerrado are progressive. Hence, the knowledge propagation about the importance of the species found in Cerrado could contribute to the preservation of this biome. This review provides information about Cerrado fruits and highlights the structures and pharmacologic potential of functional compounds found in these fruits. Compounds detected in Caryocar brasiliense Camb. (pequi), Dipteryx alata Vog. (baru), Eugenia dysenterica DC. (cagaita), Eugenia uniflora L. (pitanga), Genipa americana L. (jenipapo), Hancornia speciosa Gomes (mangaba), Mauritia flexuosa L.f. (buriti), Myrciaria cauliflora (DC) Berg (jabuticaba), Psidium guajava L. (goiaba), Psidium spp. (araçá), Solanum lycocarpum St. Hill (lobeira), Spondias mombin L. (cajá), Annona crassiflora Mart. (araticum), among others are reported here.

  11. Radiation synthesis of materials and compounds

    CERN Document Server

    Kharisov, Boris Ildusovich; Ortiz Méndez, Ubaldo

    2013-01-01

    Researchers and engineers working in nuclear laboratories, nuclear electric plants, and elsewhere in the radiochemical industries need a comprehensive handbook describing all possible radiation-chemistry interactions between irradiation and materials, the preparation of materials under distinct radiation types, the possibility of damage of materials under irradiation, and more. Radiation nanotechnology is still practically an undeveloped field, except for some achievements in the fabrication of metallic nanoparticles under ionizing flows. Radiation Synthesis of Materials and Compounds presents the state of the art of the synthesis of materials, composites, and chemical compounds, and describes methods based on the use of ionizing radiation. It is devoted to the preparation of various types of materials (including nanomaterials) and chemical compounds using ionizing radiation (alpha particles, beta particles, gamma rays, x-rays, and neutron, proton, and ion beams). The book presents contributions from leaders ...

  12. Chord length distribution for a compound capsule

    International Nuclear Information System (INIS)

    Pitřík, Pavel

    2017-01-01

    Chord length distribution is a factor important in the calculation of ionisation chamber responses. This article describes Monte Carlo calculations of the chord length distribution for a non-convex compound capsule. A Monte Carlo code was set up for generation of random chords and calculation of their lengths based on the input number of generations and cavity dimensions. The code was written in JavaScript and can be executed in the majority of HTML viewers. The plot of occurrence of cords of different lengths has 3 peaks. It was found that the compound capsule cavity cannot be simply replaced with a spherical cavity of a triangular design. Furthermore, the compound capsule cavity is directionally dependent, which must be taken into account in calculations involving non-isotropic fields of primary particles in the beam, unless equilibrium of the secondary charged particles is attained. (orig.)

  13. Pickpocket compounds from Latin to Romance

    DEFF Research Database (Denmark)

    Whitehead, Benedicte Nielsen

    This thesis discusses the development in Proto–Indo–European, Latin and Romance of a word–formation pattern which the most adequate terminology in use dubs ‘verbal government compounds with a governing first member’; I use the shorthand ‘pickpocket compounds’. The first member of such compounds...... derives from a verb, while the second mostly represents its direct object: thus English pickpocket. Most English examples are functionally agent–nouns, referring to the agent of the implied verbal act. Nevertheless, they lack a suffix indicating this. By contrast, the more prolific type of compound agent....... It contains a cursory discussion of Homeric Greek, Indo–Iranian and Germanic representatives. This comparative perspective on the morphology of the type is continued in chapters 3–5 on Latin and Romance. An important conclusion, and an answer to one of the most–discussed questions in the debate...

  14. Chemosensors for detection of nitroaromatic compounds (explosives)

    Science.gov (United States)

    Zyryanov, G. V.; Kopchuk, D. S.; Kovalev, I. S.; Nosova, E. V.; Rusinov, V. L.; Chupakhin, O. N.

    2014-09-01

    The key types of low-molecular-mass chemosensors for the detection of nitroaromatic compounds representing energetic substances (explosives) are analyzed. The coordination and chemical properties of these chemosensors and structural features of their complexes with nitroaromatic compounds are considered. The causes and methods for attaining high selectivity of recognition are demonstrated. The primary attention is paid to the use of low-molecular-mass chemosensors for visual detection of explosives of this class by colorimetric and photometric methods. Examples of using photo- and chemiluminescence for this purpose are described. A separate section is devoted to electrochemical methods of detection of nitroaromatic compounds. Data published from 2000 to 2014 are mainly covered. The bibliography includes 245 references.

  15. Chemosensors for detection of nitroaromatic compounds (explosives)

    International Nuclear Information System (INIS)

    Zyryanov, G V; Kopchuk, D S; Rusinov, V L; Chupakhin, O N; Kovalev, I S; Nosova, E V

    2014-01-01

    The key types of low-molecular-mass chemosensors for the detection of nitroaromatic compounds representing energetic substances (explosives) are analyzed. The coordination and chemical properties of these chemosensors and structural features of their complexes with nitroaromatic compounds are considered. The causes and methods for attaining high selectivity of recognition are demonstrated. The primary attention is paid to the use of low-molecular-mass chemosensors for visual detection of explosives of this class by colorimetric and photometric methods. Examples of using photo- and chemiluminescence for this purpose are described. A separate section is devoted to electrochemical methods of detection of nitroaromatic compounds. Data published from 2000 to 2014 are mainly covered. The bibliography includes 245 references

  16. Volatile compounds in meat and meat products

    Directory of Open Access Journals (Sweden)

    Monika KOSOWSKA

    Full Text Available Abstract Meaty flavor is composed of a few hundreds of volatile compounds, only minor part of which are responsible for the characteristic odor. It is developed as a result of multi-directional reactions proceeding between non-volatile precursors contained in raw meat under the influence of temperature. The volatile compounds are generated upon: Maillard reactions, lipid oxidation, interactions between Maillard reaction products and lipid oxidation products as well as upon thiamine degradation. The developed flavor is determined by many factors associated with: raw material (breed, sex, diet and age of animal, conditions and process of slaughter, duration and conditions of meat storage, type of muscle, additives applied and the course of the technological process. The objective of this review article is to draw attention to the issue of volatile compounds characteristic for meat products and factors that affect their synthesis.

  17. Bioactive Compounds Found in Brazilian Cerrado Fruits

    Directory of Open Access Journals (Sweden)

    Elisa Flávia Luiz Cardoso Bailão

    2015-10-01

    Full Text Available Functional foods include any natural product that presents health-promoting effects, thereby reducing the risk of chronic diseases. Cerrado fruits are considered a source of bioactive substances, mainly phenolic compounds, making them important functional foods. Despite this, the losses of natural vegetation in the Cerrado are progressive. Hence, the knowledge propagation about the importance of the species found in Cerrado could contribute to the preservation of this biome. This review provides information about Cerrado fruits and highlights the structures and pharmacologic potential of functional compounds found in these fruits. Compounds detected in Caryocar brasiliense Camb. (pequi, Dipteryx alata Vog. (baru, Eugenia dysenterica DC. (cagaita, Eugenia uniflora L. (pitanga, Genipa americana L. (jenipapo, Hancornia speciosa Gomes (mangaba, Mauritia flexuosa L.f. (buriti, Myrciaria cauliflora (DC Berg (jabuticaba, Psidium guajava L. (goiaba, Psidium spp. (araçá, Solanum lycocarpum St. Hill (lobeira, Spondias mombin L. (cajá, Annona crassiflora Mart. (araticum, among others are reported here.

  18. Reliability and radiation effects in compound semiconductors

    CERN Document Server

    Johnston, Allan

    2010-01-01

    This book discusses reliability and radiation effects in compound semiconductors, which have evolved rapidly during the last 15 years. Johnston's perspective in the book focuses on high-reliability applications in space, but his discussion of reliability is applicable to high reliability terrestrial applications as well. The book is important because there are new reliability mechanisms present in compound semiconductors that have produced a great deal of confusion. They are complex, and appear to be major stumbling blocks in the application of these types of devices. Many of the reliability problems that were prominent research topics five to ten years ago have been solved, and the reliability of many of these devices has been improved to the level where they can be used for ten years or more with low failure rates. There is also considerable confusion about the way that space radiation affects compound semiconductors. Some optoelectronic devices are so sensitive to damage in space that they are very difficu...

  19. Environmentally acceptable thread compounds: Requirements defined

    International Nuclear Information System (INIS)

    Stringfellow, W.D.; Hendriks, R.V.; Jacobs, N.L.

    1993-01-01

    New environmental regulations on thread compounds are now being enforced in several areas with strong maritime tradition and a sensitive environment. These areas include Indonesia, Alaska and portions of Norway. The industry generally recognizes the environmental concerns but, with wider enforcement of regulations imminent, has not been able to define clearly the requirements for environmental compliance. This paper, written in collaboration with The Netherlands State Supervision of Mines, is based on the National Policy on Thread Compounds of The Netherlands. This national policy is representative of policies being followed by other North Sea governments. Similar policies might well be adopted by other governments worldwide. These policies will affect the operator, drilling contractor, and supplier. This paper provides a specific and detailed definition of thread compound requirements by addressing four relevant categories. The categories of interest are regulatory approval, environmental, health, and performance

  20. Identification of isomers of organometallic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Mbue, Sona Peter; Cho, Kwang Hwi [Dept. of Bioinformatics and Life Science, School of Systems Biomedical Science, Soongsil University,Seoul (Korea, Republic of)

    2015-06-15

    The yaChI is a newly suggested chemical naming system. However, yaChI is a derivative of the IUPAC InChI with a modified algorithm that includes additional layers of chemical structure information. Consequently, yaChI string contains more structure details while preserving the original structure file information and can distinctively identify very closely related compounds reducing the chances of ambiguity in chemical compound databases as opposed to the general SMILES, InChI, and InChIKey. This study examines the relative performances of yaChI, SMILES, InChI, and InChIKey in duplication check for isomers. For simplicity, a small data set of 28 organometallic compounds (structural isomers of Rh-containing compounds) subdivided into three major groups (A, B, and C) based on the number and the type of ligands attached to the center atom was used to study the performances of each encoding scheme in describing chemical structures. SMILES, InChI, and InChIKey were generated using Openbabel and RDkit, whereas yaChI strings were generated with in-house program. Strings generated from SMILES, InChI, and InChIKey though different, resulted to only three unique chemical identifiers, with each belonging to one group indicating the presence of only three unique compounds in the study data. However, yaChI results depicted that all structures in each group are indeed unique and differ among themselves as well as those from other groups, mapping each structure with a unique identifier given a total number of 28 unique structures in the study data. This high perception of yaChI probe justifies its accuracy and reliability in duplication check among closely related compounds especially structures exhibiting stereo properties.

  1. Antiviral lead compounds from marine sponges

    KAUST Repository

    Sagar, Sunil

    2010-10-11

    Marine sponges are currently one of the richest sources of pharmacologically active compounds found in the marine environment. These bioactive molecules are often secondary metabolites, whose main function is to enable and/or modulate cellular communication and defense. They are usually produced by functional enzyme clusters in sponges and/or their associated symbiotic microorganisms. Natural product lead compounds from sponges have often been found to be promising pharmaceutical agents. Several of them have successfully been approved as antiviral agents for clinical use or have been advanced to the late stages of clinical trials. Most of these drugs are used for the treatment of human immunodeficiency virus (HIV) and herpes simplex virus (HSV). The most important antiviral lead of marine origin reported thus far is nucleoside Ara-A (vidarabine) isolated from sponge Tethya crypta. It inhibits viral DNA polymerase and DNA synthesis of herpes, vaccinica and varicella zoster viruses. However due to the discovery of new types of viruses and emergence of drug resistant strains, it is necessary to develop new antiviral lead compounds continuously. Several sponge derived antiviral lead compounds which are hopedto be developed as future drugs are discussed in this review. Supply problems are usually the major bottleneck to the development of these compounds as drugs during clinical trials. However advances in the field of metagenomics and high throughput microbial cultivation has raised the possibility that these techniques could lead to the cost-effective large scale production of such compounds. Perspectives on biotechnological methods with respect to marine drug development are also discussed. 2010 by the authors; licensee MDPI.

  2. Behaviour of mercury compounds in soil

    Energy Technology Data Exchange (ETDEWEB)

    Booer, J R

    1944-01-01

    The uses of inorganic compounds of mercury for the control of plant pests is reviewed, and a summary of the relevant chemical and physical properties of the compounds concerned is given. On chemical evidence a working hypothesis is propounded showing that all compounds may be expected to decompose into metallic mercury. A pot technique is described by means of which a correlation can be obtained between the effective mercury content of a given soil sample and the rate of growth of wheat seedlings. The mathematical treatment of the results is described, and the validity of the pot technique is verified by statistical analysis of results. Using the pot technqiue it is shown that volatilization losses are insignificant but that mercury is slowly rendered ineffective by the formation of mercuric sulphide. The effect of sulphur-reducing bacteria is considered and the influence of Vibrio desulphuricans on mercury is studied in detail. Experimental evidence obtained by the pot technique is produced to show that mercurous chloride slowly decomposes in the soil giving mercury and mercuric chloride, mercuric chloride rapidly decomposes into mercury and mercurous chloride, and other inorganic compounds decompose directly into mercury. The working hypothesis is substantiated in all major aspects. The uses and properties of the organo-mercury compounds are then discussed. Type compounds selected are ethyl mercury phosphate, phenyl mercury acetate and methoxyethyl mercury acetate. Using the pot technique it is shown that the formation of organo-mercury clays takes place and that these clays decompose giving metallic mercury. A mechanism is suggested.

  3. Respiratory carcinogenicity assessment of soluble nickel compounds.

    Science.gov (United States)

    Oller, Adriana R

    2002-10-01

    The many chemical forms of nickel differ in physicochemical properties and biological effects. Health assessments for each main category of nickel species are needed. The carcinogenicity assessment of water-soluble nickel compounds has proven particularly difficult. Epidemiologic evidence indicates an association between inhalation exposures to nickel refinery dust containing soluble nickel compounds and increased risk of respiratory cancers. However, the nature of this association is unclear because of limitations of the exposure data, inconsistent results across cohorts, and the presence of mixed exposures to water-insoluble nickel compounds and other confounders that are known or suspected carcinogens. Moreover, well-conducted animal inhalation studies, where exposures were solely to soluble nickel, failed to demonstrate a carcinogenic potential. Similar negative results were seen in animal oral studies. A model exists that relates respiratory carcinogenic potential to the bioavailability of nickel ion at nuclear sites within respiratory target cells. This model helps reconcile human, animal, and mechanistic data for soluble nickel compounds. For inhalation exposures, the predicted lack of bioavailability of nickel ion at target sites suggests that water-soluble nickel compounds, by themselves, will not be complete human carcinogens. However, if inhaled at concentrations high enough to induce chronic lung inflammation, these compounds may enhance carcinogenic risks associated with inhalation exposure to other substances. Overall, the weight of evidence indicates that inhalation exposure to soluble nickel alone will not cause cancer; moreover, if exposures are kept below levels that cause chronic respiratory toxicity, any possible tumor-enhancing effects (particularly in smokers) would be avoided.

  4. Influence de divers traitements physico-chimiques de graines de Mucuna pruriens sur leur composition chimique en nutriments

    Directory of Open Access Journals (Sweden)

    Dossa, CS.

    1999-01-01

    Full Text Available Influence of Various Physicochemical Treatments of Mucuna pruriens Seeds on the Nutrient Chemical Composition. Mucuna pruriens is being intensively used to fight off couch grass Imperata cylindrica and restore washed out lithosol fertility, in most of the agro ecological zones of Benin. From the huge amount of grains harvested, only a small part is used as seeds. This study was made to determine the effects of different ways of processing Mucuna pruriens var. utilis and M. pruriens var. cochichennensis grains on the toxic factor contents such as L-dopa and other antinutritionnal factors. Of the different physical and chemical treatment tested, grilling remarkably increased the potential nutritional content while boiling gave lower nutrient values. While awaiting assessment of the residual L-dopa level, the following treatment could be advised : after a preliminary soaking of the grains in cold water during 24 hours, they were dehulled and grilled for one hour. That procedure offered higher dry matter, higher crude protein and higher nitrogen-free extract in the preparations. The chemical contents of the two cultivars are not identical but dry matter and phosphorus contents are comparable.

  5. Erupted Compound Odontomas: A Case Report

    Directory of Open Access Journals (Sweden)

    Avinash Tejasvi M.L.

    2011-03-01

    Full Text Available The tumors in which odontogenic differentiation is fully expressed are the odontomas. Odontomas are considered as hamartomas rather than a true neoplasm. These tumors are composed of enamel, dentine, cementum and pulp tissue. It is most commonly associated with the eruption of the teeth. They are usually discovered on routine radiographic examination. In exceptional cases, the odontoma erupts in to the mouth. Nine cases of erupted compound odontomas are reported in the English literature, and the present paper reports another case of an erupted compound odontoma in a 22-year-old female patient.

  6. Magnetic behaviour of new Ce compounds

    Energy Technology Data Exchange (ETDEWEB)

    Sampathkumaran, E V [Tata Inst. of Fundamental Research, Bombay (India); Mallik, R [Tata Inst. of Fundamental Research, Bombay (India)

    1996-07-01

    We report initial results of our investigation on the magnetic behaviour of some new Ce compounds. The compounds, CeIr{sub 2}B{sub 2}C and CeIr{sub 2}Ge{sub 2}, do not appear to exhibit bulk magnetic ordering down to 2 K. The alloys, Ce{sub 2}Pd{sub 2}In and Ce{sub 2}Cu{sub 2}In, order magnetically below 4 and 6 K, respectively, and a marginal change in the Pd(Cu)/In composition does not significantly influence the ordering temperatures. (orig.).

  7. Photovoltaic applications of Compound Parabolic Concentrator (CPC)

    Science.gov (United States)

    Winston, R.

    1975-01-01

    The use of a compound parabolic concentrator as field collector, in conjunction with a primary focusing concentrator for photovoltaic applications is studied. The primary focusing concentrator can be a parabolic reflector, an array of Fresnel mirrors, a Fresnel lens or some other lens. Silicon solar cell grid structures are proposed that increase efficiency with concentration up to 10 suns. A ray tracing program has been developed to determine energy distribution at the exit of a compound parabolic concentrator. Projected total cost of a CPC/solar cell system will be between 4 and 5 times lower than for flat plate silicon cell arrays.

  8. Antiosteoporotic compounds from seeds of Cuscuta chinensis.

    Science.gov (United States)

    Yang, Lijuan; Chen, Qianfeng; Wang, Fei; Zhang, Guolin

    2011-05-17

    The seeds of Cuscuta chinensis (Tu-Si-Zi, TSZ) have long been used for the treatment of osteoporosis in China and some Asian countries. The compounds in TSZ responsible for the antiosteoporotic activity are still poorly understood. The present study was designed to investigate the osteogenic compounds in TSZ, and to evaluate their antiosteoporotic effects in osteoblastic cells. Osteoblast-like UMR-106 cells were used for bioactivity-guided isolation of the active compounds. The activity of alkaline phosphatase (ALP) in UMR-106 cells was measured by p-nitrophenyl sodium phosphate assay. The proliferation of UMR-106 cells was assayed by Alamar-Blue method. Estrogenic activity of the extracts and isolated compounds was evaluated by activation of estrogen response element (ERE) luciferase reporter expression in HeLa cells co-transfected with human estrogen receptor subtypes (ERα or ERβ) expression vectors and 5×ERE luciferase reporter plasmid. Antiestrogenic activity of the extracts and isolated compounds were evaluated by activation of activator protein-1 (AP-1) luciferase reporter expression in HeLa cells co-transfected with human estrogen receptor subtypes (ERα or ERβ) expression vectors and 6×AP-1 luciferase reporter plasmid. ALP-guided fractionation led to the isolation of five known flavonoids, quercetin, kaempferol, isorhamnetin, hyperoside and astragalin from the crude ethanolic extract of TSZ. Further study showed that kaempferol and hyperoside significantly increased the ALP activity in UMR-106 cells. Astragalin promoted the proliferation of UMR-106 cells whereas other compounds had no such effect. The isolated compounds showed estrogenic activity but quercetin, kaempferol and isorhamnetin showed more potent ERβ agonist activity. However, compared with their ER agonist activity, only quercetin and kaempferol showed potent ER antagonist activity by activating ERα/β-mediated AP-1 reporter expression. Our findings validated the clinical use of TSZ in

  9. Catalytic Kinetic Resolution of Biaryl Compounds.

    Science.gov (United States)

    Ma, Gaoyuan; Sibi, Mukund P

    2015-08-10

    Biaryl compounds with axial chirality are very common in synthetic chemistry, especially in catalysis. Axially chiral biaryls are important due to their biological activities and extensive applications in asymmetric catalysis. Thus the development of efficient enantioselective methods for their synthesis has attracted considerable attention. This Minireview discusses the progress made in catalytic kinetic resolution of biaryl compounds and chronicles significant advances made recently in catalytic kinetic resolution of biaryl scaffolds. © 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Nominal compound acquisition in 10 languages

    DEFF Research Database (Denmark)

    Dressler, Wolfgang U.; Kilani-Schoch, Marianne; Ketrez, Nihan

    phases which usually differ among the participants in tests and are limited to single morphological patterns, whereas our study shows that first compound patterns emerge simultaneously or quasi-simultaneously with first inflection and derivation patterns. Finally it will be discussed whether and to which...... degree findings of test results from single languages are supported or not by our typological comparison of longitudinal studies. Examples are inversion of compound constituents [5], postulated non-occurrence of “regular” inflection of left-hand constituents [6], status of interfixes (linking elements...

  11. Unusual bond paths in organolithium compounds

    International Nuclear Information System (INIS)

    Bachrach, S.M.; Ritchie, J.P.

    1986-01-01

    We have applied the topological method to a number of organolithium compounds. The wavefunctions were determined with GAUSSIAN-82 using 3-21G basis set and fully optimized geometries. Gradient paths were obtained using the RHODER package and critical points were located using EXTREME. These results indicate the unusual nature of organolithium compounds. The strange bond paths arise mainly from the ionic nature of the C-Li interaction. We suggest that the term ''bond path'' may best be suited for covalent bonds. 4 figs., 1 tab

  12. Phonological Processes in Complex and Compound Words

    Directory of Open Access Journals (Sweden)

    Alieh Kord Zaferanlu Kambuziya

    2016-02-01

    Full Text Available Abstract This research at making a comparison between phonological processes in complex and compound Persian words. Data are gathered from a 40,000-word Persian dictionary. To catch some results, 4,034 complex words and 1,464 compound ones are chosen. To count the data, "excel" software is used. Some results of the research are: 1- "Insertion" is the usual phonological process in complex words. More than half of different insertions belongs to the consonant /g/. Then /y/ and // are in the second and the third order. The consonant /v/ has the least percentage of all. The most percentage of vowel insertion belongs to /e/. The vowels /a/ and /o/ are in the second and third order. Deletion in complex words can only be seen in consonant /t/ and vowel /e/. 2- The most frequent phonological processes in compounds is consonant deletion. In this process, seven different consonants including /t/, //, /m/, /r/, / ǰ/, /d, and /c/. The only deleted vowel is /e/. In both groups of complex and compound, /t/ deletion can be observed. A sequence of three consonants paves the way for the deletion of one of the consonants, if one of the sequences is a sonorant one like /n/, the deletion process rarely happens. 3- In complex words, consonant deletion causes a lighter syllable weight, whereas vowel deletion causes a heavier syllable weight. So, both of the processes lead to bi-moraic weight. 4- The production of bi-moraic syllable in Persian is preferable to Syllable Contact Law. So, Specific Rules have precedence to Universals. 5- Vowel insertion can be seen in both groups of complex and compound words. In complex words, /e/ insertion has the most fundamental part. The vowels /a/ and /o/ are in the second and third place. Whenever there are two sequences of ultra-heavy syllables. By vowel insertion, the first syllable is broken into two light syllables. The compounds that are influenced by vowel insertion, can be and are pronounced without any insertion

  13. Fragrance compounds and amphiphilic association structures.

    Science.gov (United States)

    Friberg, S E

    1998-05-01

    Fragrance formulations have traditionally been based on alcohol as the solvent, but the recent legal restrictions on volatile organic solvents have prompted the industry to change to aqueous solubilized systems. The article reviews the fundamental factors in the application of such systems evaluating the influence by different amphiphilic association structures on the vapor pressure of fragrance compounds. This information is subsequently used to estimate the variation of fragrance compound vapor pressures during evaporation. The results reveal that the vapor pressure versus time variation is improved compared to solvent-based formulations.

  14. Organic compounds in the Murchison meteorite.

    Science.gov (United States)

    Ponnamperuma, C.

    1972-01-01

    Impressive supporting evidence for the concept of the chemical evolution of life has appeared in the discovery of biologically important compounds in extraterrestrial samples. The approaches pursued to detect extraterrestrial organic compounds include the study of interstellar space by radioastronomy, the evaluation of the Apollo lunar samples, and the analysis of meteorites, both ancient and recent. It has been found that the clouds of gas in the interstellar medium contain a wide variety of molecules, most of which are organic in nature. The carbonaceous chondrites contain polymeric organic matter. Amino acids have been detected in the Murchison meteorite.

  15. Design of Fluorescent Compounds for Scintillation Detection

    Energy Technology Data Exchange (ETDEWEB)

    Pla-Dalmau, Anna [Northern Illinois U.

    1990-01-01

    Plastic scintillation detectors for high energy physics applications require the development of new fluorescent compounds to meet the demands set by the future generation of particle accelerators such as the Superconducting Supercollider (SSe). Plastic scintillators are commonly based on a polymer matrix doped with two fluorescent compounds: the primary dopant and the wavelength shifter. Their main characteristics are fast response time and high quantum efficiency. The exposure to larger radiation doses and demands for larger light output questions their survivability in the future experiments. A new type of plastic scintillator - intrinsic scintillator - has been suggested. It uses a single dopant as primary and wavelength shifter, and should be less susceptible to radiation damage....

  16. Cantilever torque magnetometry on coordination compounds

    DEFF Research Database (Denmark)

    Perfetti, Mauro

    2017-01-01

    compounds, such as quantum computation or information storage. This review enlightens that CTM offers a unique combination of accuracy and precision to disentangle noncollinear contributions inside Single Crystals as well as the sensitivity to detect molecular order of thin films. CTM can also detect......Cantilever Torque Magnetometry (CTM) is one of the leading techniques to deeply understand magnetic anisotropy of coordination compounds. The knowledge of magnetic anisotropy is a mandatory requirement before proceeding with any future application related to the magnetic properties of coordination...... quantum phenomena such as magnetization steps and molecular hysteresis curves. Moreover, it can also provide the energy levels splitting and avefunctions composition, especially if coupled with microwave radiation....

  17. Thin film Heusler compounds manganese nickel gallium

    Science.gov (United States)

    Jenkins, Catherine Ann

    Multiferroic Heusler compounds Mn3--xNi xGa (x=0,1,2) have a tetragonal unit cell that can variously be used for magneto-mechanically coupled shape memory ( x=1,2) and spin-mechanical applications (x=0). The first fabrication of fully epitaxial thin films of these and electronically related compounds by sputtering is discussed. Traditional and custom lab characterization of the magnetic and temperature driven multiferroic behavior is augmented by more detailed synchrotron-based high energy photoemission spectroscopic techniques to describe the atomic and electronic structure. Integration of the MnNi2Ga magnetic shape memory compound in microwave patch antennas and active free-standing structures represents a fraction of the available and promising applications for these compounds. Prototype magnetic tunnel junctions are demonstrated by Mn3Ga electrodes with perpendicular anisotropy for spin torque transfer memory structures. The main body of the work concentrates on the definition and exploration of the material series Mn3--xNi xGa (x=0,1,2) and the relevant multiferroic phenomena exhibited as a function of preparation and external stimuli. Engineering results on each x=0,1,2 are presented with device prototypes where relevant. In the appendices the process of the materials design undertaken with the goal of developing new ternary intermetallics with enhanced properties is presented with a full exploration of the road from band structure calculations to device implementation. Cobalt based compounds in single crystal and nanoparticle form are fabricated with an eye to developing the production methods for new cobalt- and iron-based magnetic shape memory compounds for device applications in different forms. Mn2CoSn, a compound isolectronic and with similar atomic ordering to Mn2NiGa is experimentally determined to be a nearly half-metallic ferromagnet in contrast to the metallic ferrimagnetism in the parent compound. High energy photoemission spectroscopy is shown to

  18. Dissolution behavior of lithium compounds in ethanol

    Directory of Open Access Journals (Sweden)

    Tomohiro Furukawa

    2016-12-01

    Full Text Available In order to exchange the components which received irradiation damage during the operation at the International Fusion Materials Irradiation Facility, the adhered lithium, which is partially converted to lithium compounds such as lithium oxide and lithium hydroxide, should be removed from the components. In this study, the dissolution experiments of lithium compounds (lithium nitride, lithium hydroxide, and lithium oxide were performed in a candidate solvent, allowing the clarification of time and temperature dependence. Based on the results, a cleaning procedure for adhered lithium on the inner surface of the components was proposed.

  19. Structural studies of novel coordination compounds run in the Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences

    International Nuclear Information System (INIS)

    Antipin, M.Yu.; Starikova, Z.A.; Yanovskij, A.I.; Dolgushin, F.M.; Lysenko, K.A.; Khrustalev, V.N.; Vorontsov, I.I.; Korlyukov, A.A.; Andreev, G.B.; Neretin, I.S.

    2001-01-01

    The results of the investigation into structural chemistry of coordination compounds taking place in the X-ray Laboratory of the Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences are given. The review gives an idea on the tendencies to structural researches of complexes of varying categories of coordination compounds, among which are lithium, strontium, cadmium compounds, rare earth compounds, transuranium compounds, transition element compounds, carboranes, fullerenes. An attempt was made to prove the structure and reveal the novel structural and crystallochemical regularities in the studied series of relative compounds. The outlooks for the following progress of studies on this field are determined [ru

  20. Magnetic moment densities in selected UTX compounds

    Czech Academy of Sciences Publication Activity Database

    Javorský, P.; Schweizer, J.; Givord, F.; Boucherle, J.-X.; Andreev, Alexander V.; Diviš, M.; Lelievre-Berna, E.; Sechovský, V.

    2004-01-01

    Roč. 350, - (2004), e131-e134 ISSN 0921-4526 R&D Projects: GA ČR GA202/03/0550 Institutional research plan: CEZ:AV0Z1010914 Keywords : uranium compound * polarized neutron scattering * magnetic moment Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.679, year: 2004

  1. Atmospheric degradation mechanism of organic sulfur compounds

    Energy Technology Data Exchange (ETDEWEB)

    Benter, T; Arsene, C

    2002-02-01

    In the present work a detailed product study has been performed on the OH radical initiated oxidation of dimethyl sulphide and dimethyl sulphoxide, under different conditions of temperature, partial pressure of oxygen and NO{sub x} concentration, in order to better define the degradation mechanism of the above compounds under conditions which prevail in the atmosphere. (orig.)

  2. Fast Screening of Antibacterial Compounds from Fusaria

    DEFF Research Database (Denmark)

    Sondergaard, Teis Esben; Fredborg, Marlene; Christensen, Ann-Maria Oppenhagen

    2016-01-01

    Bio-guided screening is an important method to identify bioactive compounds from fungi. In this study we applied a fast digital time-lapse microscopic method for assessment of the antibacterial properties of secondary metabolites from the fungal genus Fusarium. Here antibacterial effects could...

  3. Mutagenic activities of metal compounds in bacteria

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, H

    1975-01-01

    Environmental contaminations by certain metal compounds are bringing about serious problems to human health, including genetic hazards. It has been reported that some compounds of iron, manganese and mercury induce point mutations in microorganisms. Also it has been observed that those of aluminum, antimony, arsenic, cadmium, lead and tellurium cause chromosome aberrations in plants, insects and cultured human cells. The mechanism of mutation induction by these metals remains, however, still obscure. For screening of chemical mutagens, Kada et al, recently developed a simple and efficient method named rec-assay by observing differential growth sensitivities to drugs in wild and recombination-deficient strains of Bacillus subtilis. When a chemical is more inhibitory for Rec/sup -/ than for Rec/sup +/ cells, it is reasonable to suspect mutagenicity based on its DNA-damaging capacity. In the present report, 56 metal compounds were tested by the rec-assay. Compounds showing positive results in the assay such as potassium dichromate (K/sub 2/Cr/sub 2/O/sub 7/), ammonium molybdate ((NH/sub 4/)/sub 6/Mo/sub 7/O/sub 24/) and sodium arsenite (NaAsO/sub 2/) were then examined as to their capacities to induce reversions in E. coli Trp/sup -/ strains possessing different DNA repair pathways. 11 references, 3 tables.

  4. Chemical Compounds and Extraction Methods of "Maollahm".

    Science.gov (United States)

    Sadeghpoor, Omid; Dayeni, Manijeh; Razi, Samane

    2016-05-01

    Maollahm or meat juice, a by-product of meat, is a traditional remedy in Persian medicine. This product was used as a nourishment or treatment substance for sick people. According to the ancient Persian medicine, animal meat has more affinity with the human body and the body easily absorbs its nutrition. Therefore, one could resort to maollahm for patients requiring urgent nourishment to boost and strengthen their body. In this work, different ways of preparing maollahm from poultry, goat, cow, and sheep meat are studied. Most of these methods are based on distillation or barbecue before distillation, as prescribed by traditional medicine books. The reactions, chemical processes, and volatile compounds related to different types of cooked meat are also compared with the outcome of recent research studies. The difference between various types of meat is related to their compounds. Different cooking processes such as barbecuing, roasting, cooking, and boiling have an effect on the taste, smell and the chemical constituents of maollahm. Additionally, the type of meat, animal feed, as well as using or removing the fat during the cooking process, have an effect on the produced volatile compounds. Cooking process and the type of meat have a direct effect on the compounds of maollahm. Possible reactions in the preparation process of maollahm are investigated and presented according to the new research studies.

  5. Bioactive Compounds And Encapsulation Of Yanang ( Tiliacora ...

    African Journals Online (AJOL)

    Furthermore, this paper reports the design of the experimental method for optimization of Yanang encapsulation using three independent variables: the ratio of core material (Yanang), to wall material (gum Arabic), gum Arabic concentration and inlet temperature of spray drying on bioactive compounds stability. The stability ...

  6. Process for uranium recovery in phosphorus compounds

    International Nuclear Information System (INIS)

    Demarthe, J.M.; Solar, Serge.

    1980-01-01

    Process for uranium recovery in phosphorus compounds with an organic phase containing a dialkylphosphoric acid. A solubilizing agent constituted of an heavy alcohol or a phosphoric acid ester or a tertiary phosphine oxide or octanol-2, is added to the organic phase for solubilization of the uranium and ammonium dialkyl pyrophosphate [fr

  7. Convenient Reduction of Carbonyl Compounds to their ...

    African Journals Online (AJOL)

    NICO

    Alcohols and their derivatives occupy an important position in organic synthesis. ... review also reveals that the reduction of carbonyl compounds ..... 1 H.B. Ji and Y.B. She, Green Oxidation and Reduction, China Petrochemi- cal Press, Beijing ...

  8. Synthesis and Characterization of Furanic Compounds

    Science.gov (United States)

    2013-09-01

    Furanamine. Solvent 2-Furanamine Acetone — Chloroform — Dimethylacetamide (DMAc) — Dimethylsulfoxide ( DMSO ) + Methanol ± Tetrahydrofuran (THF...4 Figure 4. 1 H NMR of 2-Furanamine in D2O solvent ...Spectra for the furanic compounds were obtained in a 0.1%–0.5% deuterated solvent solutions. 3. Synthesis 3.1 General The following monomers and

  9. Effects of uranium compounds on skin

    International Nuclear Information System (INIS)

    Rey, B.M. de

    1982-12-01

    The following uranium compounds were topically applied to the dorsal skin of 35 day-old Wistar rats (60 g, male): uranium dioxide, uranyl nitrate, uranyl acetate, ammonium uranyl tricarbonate and ammonium diuranate. Percutaneous absorption was mediated with the aid of a vehicle and known quantities of various particle-sized batches of uranium compounds were directly implanted in the subcutaneous tissue. Animals were sacrificed 3, 6, 24 and 48 hours after implantation. Subcutaneous tissue and muscle underneath the implantation site were anlaysed by light and electron microscopy. A Cameca 322 X-ray microanalyzer was used to analyze uranium traces in calcified tissue (bones and teeth) and kidneys. A steady loss in body weight was observed in animals given high concentration of uranyl nitrate and ammonium uranyl tricarbonate. All animals died five days after the onset of the experiment due to renal failure. Slightly soluble compounds, ammonium diuranate and uranyl acetate, caused only a slight decrease in body weight. Uranium dioxide, the most insoluble compound used, induced only a transitory slight body weight decrease. Histopathological study revealed damages to the tissues of topicated skin, hair follicles and adnexal glands. High concentration of uranium was indicated in bone, teeth and kidneys by X-ray scanning

  10. Synthesis and characterization of volatile technetium compound

    International Nuclear Information System (INIS)

    Childs, Bradley C.; Poineau, Frederic; Czerwinski, Ken R.

    2013-01-01

    Technetium-99 is an important fission (T 1/2 = 2.13.105 y) product of the nuclear industry. Technetium in its highest oxidation state (VII) is highly mobile and can represent a threat to the environment. There are over 55 million gallons of high level mixed waste located at the Hanford site. Waste tanks at the Hanford site contain Tc that could potentially leak, and in the context of management of technetium, a glass waste form was proposed to counteract the issue. In the process of synthesizing melt glass between the temperatures of 600°C and 1100°C, volatile technetium compounds were observed in the reaction tube. These compounds displayed characteristic colors based upon the reaction environments of either breathing air or nitrogen gas. A breathing air atmosphere produces a red compound that adheres to the walls of the reaction tube. An atmosphere of nitrogen gas produces a white compound that was observed on the walls of the reaction tube. (author)

  11. Moessbauer study of the YFe3 compound

    International Nuclear Information System (INIS)

    Fisher, W.G.; Kuzmin, R.N.; Vardapetyan, R.P.

    1975-01-01

    Nuclear Gamma Recoilless Resonance measurement was carried out on iron sites in the YFe 3 compound at 80 and 295 K to obtain information on the iron sublattice in the absence of rare-earth magnetic moment. The results of the measurement are reported. (Z.S.)

  12. Quantum chemical studies of estrogenic compounds

    Science.gov (United States)

    Quantum chemical methods are potent tools to provide information on the chemical structure and electronic properties of organic molecules. Modern computational chemistry methods have provided a great deal of insight into the binding of estrogenic compounds to estrogenic receptors (ER), an important ...

  13. Xeno-estrogenic compounds in precipitation

    NARCIS (Netherlands)

    Peters, R.J.B.; Beeltje, H.; Delft, R.J. van

    2008-01-01

    The exposure to some chemicals can lead to hormone disrupting effects. Presently, much attention is focused on so-called xeno-estrogens, synthetic compounds that interact with hormone receptors causing a number of reactions that eventually lead to effects related to reproduction and development. The

  14. Insecticidal and fungicidal compounds from Isatis tinctoria.

    Science.gov (United States)

    Seifert, K; Unger, W

    1994-01-01

    Tryptanthrin (1), indole-3-acetonitrile (2) and p-coumaric acid methylester (3) were isolated from the aerial parts of Isatis tinctoria L. The compounds show insecticidal and anti-feedant activity against termites (Reticulitermis santonensis), insect preventive and control activity against larvae of the house longhorn beetle (Hylotrupes bajulus) and fungicidal activity against the brown-rot fungus (Coniophora puteana).

  15. Separation and characterization of phenolic compounds from ...

    African Journals Online (AJOL)

    (Combretaceae) is an Ivorian medicinal plant. There is little ethnobotanical and almost no chemical information available for this species. The aim of this study was to isolate phenolic compounds from T. ivoriensis. In this way, its ethyl acetate extract (Ea) was fractionated by silica gel column chromatography followed by ...

  16. Harmonic force field for nitro compounds.

    Science.gov (United States)

    Bellido, Edson P; Seminario, Jorge M

    2012-06-01

    Molecular simulations leading to sensors for the detection of explosive compounds require force field parameters that can reproduce the mechanical and vibrational properties of energetic materials. We developed precise harmonic force fields for alanine polypeptides and glycine oligopeptides using the FUERZA procedure that uses the Hessian tensor (obtained from ab initio calculations) to calculate precise parameters. In this work, we used the same procedure to calculate generalized force field parameters of several nitro compounds. We found a linear relationship between force constant and bond distance. The average angle in the nitro compounds was 116°, excluding the 90° angle of the carbon atoms in the octanitrocubane. The calculated parameters permitted the accurate molecular modeling of nitro compounds containing many functional groups. Results were acceptable when compared with others obtained using methods that are specific for one type of molecule, and much better than others obtained using methods that are too general (these ignore the chemical effects of surrounding atoms on the bonding and therefore the bond strength, which affects the mechanical and vibrational properties of the whole molecule).

  17. Fluorescent compounds for plastic scintillation applications

    International Nuclear Information System (INIS)

    Pla-Dalmau, A.; Bross, A.D.

    1994-04-01

    Several 2-(2'-hydroxyphenyl)benzothiazole, -benzoxazole, and -benzimidazole derivatives have been prepared. Transmittance, fluorescence, light yield, and decay time characteristics of these compounds have been studied in a polystyrene matrix and evaluated for use in plastic scintillation detectors. Radiation damage studies utilizing a 60 C source have also been performed

  18. Antiplasmodial activity of some phenolic compounds from ...

    African Journals Online (AJOL)

    Background: Plasmodium falciparum, one of the causative agents of malaria, has high adaptability through mutation and is resistant to many types of anti-malarial drugs. This study presents an in vitro assessment of the antiplasmodial activity of some phenolic compounds isolated from plants of the genus Allanblackia.

  19. On statistical analysis of compound point process

    Czech Academy of Sciences Publication Activity Database

    Volf, Petr

    2006-01-01

    Roč. 35, 2-3 (2006), s. 389-396 ISSN 1026-597X R&D Projects: GA ČR(CZ) GA402/04/1294 Institutional research plan: CEZ:AV0Z10750506 Keywords : counting process * compound process * hazard function * Cox -model Subject RIV: BB - Applied Statistics, Operational Research

  20. Visualizing Compound Rotations with Virtual Reality

    Science.gov (United States)

    Flanders, Megan; Kavanagh, Richard C.

    2013-01-01

    Mental rotations are among the most difficult of all spatial tasks to perform, and even those with high levels of spatial ability can struggle to visualize the result of compound rotations. This pilot study investigates the use of the virtual reality-based Rotation Tool, created using the Virtual Reality Modeling Language (VRML) together with…

  1. Certain Aliphatic Nitramines and Related Compounds

    Science.gov (United States)

    1944-11-29

    compounds are ruite unstable. It has beer , impossible to prepare N-iodcmifcramines by any synthesis thus far attempted and the N-bromonitramines...end of tb’f. tine the solution v;as soured over 1500 g. of crac3:cd ice end neutralised with about GOO z» ot sodium bicarbonate. After extraction

  2. Compositional differences in the phenolics compounds of ...

    African Journals Online (AJOL)

    This study evaluates phenolic composition of commercial and experimental wines derived from bunch (Vitis vinifera) and muscadine (Vitis rotundifolia) grapes to determine compositional differences in phenolics. HPLC analysis of wines showed that majority of phenolic compounds eluted during the first 30 min. Of the red ...

  3. Compounds for the treatment of calcific tumors

    Energy Technology Data Exchange (ETDEWEB)

    Francis, M D; Tofe, A J; Lampe, H W

    1974-05-21

    The preparation of a radioactive polyphosphonate compound tagged with either /sup 32/P or /sup 33/P radionuclide is described. The radiopharmaceutical is effective for producing therapeutic or pain relieving doses of radiation that can be directed toward bone tumor sites without a substantial risk of radiation damage to the remainder of the body.

  4. Semivolatile organic compounds in indoor environments

    DEFF Research Database (Denmark)

    Weschler, Charles J.; Nazaroff, W.W.

    2008-01-01

    Semivolatile organic compounds (SVOCs) are ubiquitous in indoor environments, redistributing from their original sources to all indoor surfaces. Exposures resulting from their indoor presence contribute to detectable body burdens of diverse SVOCs, including pesticides, plasticizers, and flame ret...... remarkably well with levels measured in dermal hand wipes for SVOCs possessing a wide range of octanol-air partition coefficients....

  5. Unconventional superconductivity in heavy-fermion compounds

    Energy Technology Data Exchange (ETDEWEB)

    White, B.D. [Department of Physics, University of California, San Diego, La Jolla, CA 92093 (United States); Center for Advanced Nanoscience, University of California, San Diego, La Jolla, CA 92093 (United States); Thompson, J.D. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Maple, M.B., E-mail: mbmaple@ucsd.edu [Department of Physics, University of California, San Diego, La Jolla, CA 92093 (United States); Center for Advanced Nanoscience, University of California, San Diego, La Jolla, CA 92093 (United States)

    2015-07-15

    Highlights: • Quasiparticles in heavy-fermion compounds are much heavier than free electrons. • Superconductivity involves pairing of these massive quasiparticles. • Quasiparticle pairing mediated by magnetic or quadrupolar fluctuations. • We review the properties of superconductivity in heavy-fermion compounds. - Abstract: Over the past 35 years, research on unconventional superconductivity in heavy-fermion systems has evolved from the surprising observations of unprecedented superconducting properties in compounds that convention dictated should not superconduct at all to performing explorations of rich phase spaces in which the delicate interplay between competing ground states appears to support emergent superconducting states. In this article, we review the current understanding of superconductivity in heavy-fermion compounds and identify a set of characteristics that is common to their unconventional superconducting states. These core properties are compared with those of other classes of unconventional superconductors such as the cuprates and iron-based superconductors. We conclude by speculating on the prospects for future research in this field and how new advances might contribute towards resolving the long-standing mystery of how unconventional superconductivity works.

  6. New hydrotalcite-like compounds containing yttrium

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, J.M.; Barriga, C.; Ulibarri, M.A. [Universidad de Cordoba (Spain)] [and others

    1997-01-01

    The synthesis of hydrotalcite-type compounds containing yttrium was carried out by the coprecipitation of Mg(II), Al(III), and Y(III) cations at 60 degrees C with strong alkaline solutions. Thermal treatments were applied and changes studied.

  7. Hybridization and pressure effects in UTX compounds

    Czech Academy of Sciences Publication Activity Database

    Alsmadi, A. M.; Sechovský, V.; Lacerda, A. H.; Prokes, K.; Kamarád, Jiří; Chang, S.; Jung, M. H.; Nakotte, H.

    2002-01-01

    Roč. 91, - (2002), s. 8123-8125 ISSN 0021-8979 Institutional research plan: CEZ:AV0Z1010914 Keywords : UTX intermetallic compounds * pressure effects magnetoresistance Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.281, year: 2002

  8. Separation and characterization of phenolic compounds from ...

    African Journals Online (AJOL)

    Attioua

    2013-07-03

    Jul 3, 2013 ... (Theobroma cacao). J. Mass Spectrom. 38:35-42. Sanchez R, Jauregui LR, Viladomat B, Codina (2004). Qualitative analysis of phenolic compounds in apple Pomace using liquid chromatography coupled to mass spectrometry in tandem mode. Rapid Communun Mass Spectrom. 18:553-563. Saulo LDS ...

  9. Microbiological disproportionation of inorganic sulfur compounds

    DEFF Research Database (Denmark)

    Finster, Kai

    2008-01-01

    The disproportionation of inorganic sulfur intermediates at moderate temperatures (0-80 °C) is a microbiologically catalyzed chemolithotrophic process in which compounds like elemental sulfur, thiosulfate, and sulfite serve as both electron donor and acceptor, and generate hydrogen sulfide and su...

  10. Pectolinarigenin - A Flavonoid Compound from Cirsium Japonicum ...

    African Journals Online (AJOL)

    HP

    /tjpr.v13i2.9. Original Research Article. Pectolinarigenin - A Flavonoid Compound from Cirsium. Japonicum with Potential Anti-proliferation Activity in MCF-. 7 Breast Cancer Cell. Mingqian Lu. 1,2,3. , Qingzhi Kong. 1,4. *, Xinhua Xu. 2,3.

  11. Atmospheric nitrogen compounds: Occurrence, composition and deposition

    DEFF Research Database (Denmark)

    Nielsen, T.; Pilegaard, K.; Egeløv, A.H.

    1996-01-01

    Traffic in cities and on highways is an important contributor to NOy atmospheric pollution in open areas. In this situation both the concentration and composition of NOy compounds show a wide variation and are dependent on meteorological and atmospheric chemical conditions. The proportion of NOz ...

  12. Teachers’ knowledge for teaching compound interest

    Directory of Open Access Journals (Sweden)

    Craig Pournara

    2013-11-01

    Full Text Available There is increasing acknowledgement that teachers’ knowledge for teaching mathematics is multifaceted and topic specific. Given the paucity of research on the teaching and learning of financial mathematics in general, little can be known about teachers’ knowledge for teaching compound interest. However, since financial mathematics is a component of the school curriculum in South Africa, and an important element of financial literacy more broadly, attention needs to be given to knowledge for teaching financial mathematics, and compound interest in particular. Drawing from a larger study in which the author taught a financial mathematics course to pre-service secondary mathematics teachers, a theoretical elaboration is provided of the underlying mathematics of compound interest, and connections with the world of banking. Based on findings from the study, two key student errors are identified: the over-generalisation of linear thinking in multiplicative scenarios, and the over-generalisation of reversible operations in percentage-change scenarios. Taken together, teachers’ knowledge of relevant mathematics, of the banking context and of learners’ conceptions will contribute to building a knowledge-base for teachers’ knowledge for teaching compound interest.

  13. Legume bioactive compounds: influence of rhizobial inoculation

    Directory of Open Access Journals (Sweden)

    Luis R. Silva

    2017-04-01

    Full Text Available Legumes consumption has been recognized as beneficial for human health, due to their content in proteins, fiber, minerals and vitamins, and their cultivation as beneficial for sustainable agriculture due to their ability to fix atmospheric nitrogen in symbiosis with soil bacteria known as rhizobia. The inoculation with these baceria induces metabolic changes in the plant, from which the more studied to date are the increases in the nitrogen and protein contents, and has been exploited in agriculture to improve the crop yield of several legumes. Nevertheless, legumes also contain several bioactive compounds such as polysaccharides, bioactive peptides, isoflavones and other phenolic compounds, carotenoids, tocopherols and fatty acids, which makes them functional foods included into the nutraceutical products. Therefore, the study of the effect of the rhizobial inoculation in the legume bioactive compounds content is gaining interest in the last decade. Several works reported that the inoculation of different genera and species of rhizobia in several grain legumes, such as soybean, cowpea, chickpea, faba bean or peanut, produced increases in the antioxidant potential and in the content of some bioactive compounds, such as phenolics, flavonoids, organic acids, proteins and fatty acids. Therefore, the rhizobial inoculation is a good tool to enhance the yield and quality of legumes and further studies on this field will allow us to have plant probiotic bacteria that promote the plant growth of legumes improving their functionality.

  14. Sea cucumbers, the ocean of bioactive compounds

    Directory of Open Access Journals (Sweden)

    Hadi Ebrahimi

    2015-07-01

    Full Text Available Sea cucumbers are one of the most echinoderms and from the class Holothuroidea. Some of their specific biological activities are including anti-cancer, anticoagulant, antihypertensive, anti-inflammatory, antimicrobial, antioxidant, anti-atherosclerosis and anti-tumor properties, as well as accelerate wound healing. The presence of different compounds such as saponins, chondroitin sulfates, glycosaminoglycans, sulfated Polysaccharides, glycoprotein, glycosphingolipids and essential and non essential fatty acids, are the causes of their biological properties. Saponins, which are produced for compatibility with the environment, are as theire secondary metabolites. These active compounds have biological properties like hemolytic, anti-tumor, anti-inflammatory, antibacterial, antiviral, ichthyotoxic, cytostatic, anti neogenic, antineoplastic, and uric acid lowering effects. Sea cucumber, have high economic value. In East Asia, Since ancient times, it have been traditionally used for the treatment of fatigue, sexual impotence, impotence caused by aging, constipation due to intestinal dryness, urinary incontinence, asthma, hypertension, arthritis and anemia. Also, toxins obtained from sea cucumber, have anti-viral, anti-tumor, anti-cancer and anti-pregnancy properties. According to literatures, the aqueous extract and high molecular weight compounds from sea cucumbers can inhibit tumor activity, via the apoptosis induction. Sea cucumbers because of the high percentage of protein and the absence of cholesterol, classified as an invigorating food. Because of different species of sea cucumbers in the Persian Gulf and Oman Sea the identification of compounds and biological properties of sea cucumber species in these regions is recommended to the researchers.

  15. Compound nucleus studies withy reverse kinematics

    International Nuclear Information System (INIS)

    Moretto, L.G.

    1985-06-01

    Reverse kinematics reactions are used to demonstrate the compound nucleus origin of intermediate mass particles at low energies and the extension of the same mechanism at higher energies. No evidence has appeared in our energy range for liquid-vapor equilibrium or cold fragmentation mechanisms. 11 refs., 12 figs

  16. Mutagenesis of metal compounds in bacteria

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, H

    1974-01-01

    The mutagenic activity of 41 metal compounds was examined by applying the Rec-assay method with Bacillus subtilis H17 (rec/sup +/) and M45 (rec/sup -/) strains. Among these compounds, Na/sub 2/HAsO/sub 4/, CdCl/sub 2/, K/sub 2/CrO/sub 4/, K/sub 2/Cr/sub 2/O/sub 7/, CH/sub 3/HgCl, C/sub 2/H/sub 5/HgCl, CH/sub 3/COOHgC/sub 6/H/sub 5/, MnCl/sub 2/, MnNO/sub 3/, MnSO/sub 4/, Mn(CH/sub 3/COO)/sub 2/, (NH/sub 4/)/sub 2/MoO/sub 4/ and KMoO/sub 4/ showed positive results. The reactions of K/sub 2/Cr/sub 2/O/sub 7/ and (NH/sub 4/)/sub 2/MoO/sub 4/ were especially strong in the assay. Therefore, mutation induction to reversion (try/sup +/) and streptomycin resistance (SM/sup r/) of E. coli B/r WP2 try/sup -/ (hcl/sup +/ and hcr/sup -/) by the two compounds were examined by the following two experimental procedures. Stationary phase bacteria were exposed to the compounds at high concentrations (6.9 x 10/sup -3/ approx. 3.44 x 10/sup -2/M) in M9 buffer for 15 min at 37/sup -/ with shaking. After incubation at 37/sup 0/ for 48 h visible colonies on the plates were scored. Bacteria in M9 buffer were plated in media supplemented with low concentrations (1.7 x 10/sup -5/ approx. 3.4 x 10/sup -5/M) of the compounds. K/sub 2/Cr/sub 2/O/sub 7/ and (NH/sub 4/)/sub 2/MoO/sub 4/ increased the mutation rate of SM/sup r/ and try/sup +/ in both strains treated with either procedure. No marked differences in mutation rate were found between hcr/sup +/ and hcr/sup -/. After treatment with high concentrations of compounds one can imagine that a peroxidation state produced by these peroxides in the media might affect the killing and mutation induction. These results suggest the possibility that the mutagenesis of the metals relate to their atomic values, rather than the peroxidation state as far as these two compounds are concerned.

  17. Special Heusler compounds for spintronic applications

    Energy Technology Data Exchange (ETDEWEB)

    Balke, B.

    2007-07-01

    This work emphasizes the potential of Heusler compounds in a wide range of spintronic applications. Using electronic structure calculations it is possible to design compounds for specific applications. Examples for GMR and TMR applications, for spin injection into semiconductors, and for spin torque transfer applications will be shown. After a detailed introduction about spintronics and related materials chapter 5 reports about the investigation of new half-metallic compounds where the Fermi energy is tuned in the middle of the gap to result in more stable compounds for GMR and TMR applications. The bulk properties of the quaternary Heusler alloy Co{sub 2}Mn{sub 1-x}Fe{sub x}Si with the Fe concentration ranging from x=0 to 1 are reported and the results suggest that the best candidate for applications may be found at an iron concentration of about 50%. Due to the effect that in the Co{sub 2}Mn{sub 1-x}Fe{sub x}Si series the transition metal carrying the localized moment is exchanged and this might lead to unexpected effects on the magnetic properties if the samples are not completely homogeneous chapter 6 reports about the optimization of the Heusler compounds for GMR and TMR applications. The structural and magnetic properties of the quaternary Heusler alloy Co{sub 2}FeAl{sub 1-x}Si{sub x} with varying Si concentration are reported. From the combination of experimental (better order for high Si content) and theoretical findings (robust gap at x=0.5) it is concluded that a compound with an intermediate Si concentration close to x=0.5-0.7 would be best suited for spintronic applications, especially for GMR and TMR applications. In chapter 7 the detailed investigation of compounds for spin injection into semiconductors is reported. It is shown that the diluted magnetic semiconductors based on CoTiSb with a very low lattice mismatch among each other are interesting materials for spintronics applications like Spin-LEDs or other spin injection devices. Chapter 8 refers

  18. New compounds as potential radio diagnosticians Alzheimer

    International Nuclear Information System (INIS)

    Rivera Marrero, S.; Sablón Carrazana, M.; Bencomo Martinez, A.; Merceron Martínez, D.; Jimenez Martín, J.; Pérez Perera, R.; Díaz García, O.; Rodríguez Tanty, Ch.; Prats Capote, A.; Perera Pintado, A; Fernández Maza, L.; Balcerzyk, M; Fernández Gómez, I.; Parrado Gallego, Á; León Chaviano, S.; Acosta Medina, E.

    2016-01-01

    Alzheimer's disease (AD) is the most common cause of dementia in Cuba and all over the World. According to demographic trends it has been called the epidemic of the century. It is characterized by the presence of neuropathological brain deposits: senile plaques, formed by neurofibrillary tangles (NT) and deposits of β-amyloid protein (Aß). Aß plaques could appear even 20 years before the establishment of first clinical symptoms of the disease. The aim of this study was to synthesize new naphthalene derivatives, feasible to be labeled with radionuclides emitters of either gamma radiation or positrons. These labeled compounds should be able to cross blood–brain barrier (BBB) in healthy and AD transgenic animals. As a result of this work, several synthetic precursors were synthesized, which were labeled with iodine-131, carbon-11 and fluorine-18 with a satisfactory radiochemical purity. The corresponding non-radioactive control compounds were also synthesized.In in vitro and in silico studies, obtained compounds showed affinity for the β-amyloid protein. According to SPECT and PET-CT images in healthy laboratory animals, obtained labeled compounds crossed BBB in a bi-directional way without any sign of brain uptake.Furthermore, evaluation of the biodistribution of the [ 18 F] -2- (3-fluoropropyl) -6-methoxynaphthalene ([[ 18 F] Amyloid® was performed in healthy animals.[[ 18 F]Amylovis crossed blood brain barrier. Renal and hepatic pathways were the main excretion routes. On the other hand, in transgenic mice with AD, its uptake and its retention time were higher in comparison with healthy mice. Immunohistochemistry and Congo red staining of control and transgenic mice brain slices were performed to identify β-amyloid plaques.Conclusions: Obtained compounds were able to bi-directionally cross BBB.[[ 18 F]Amylovis® could be a promising PET radiotracer for amyloid plaques visualization. (author)

  19. THE COMPOUND NOUNS BETWEEN ENGLISH AND ALBANIAN LANGUAGE

    OpenAIRE

    Shkelqim Millaku; Xhevahire Topanica

    2016-01-01

    The compound words are all the words that are compound from two or more words and both of them creative the new words with the new meaning. In linguistics, a compound is a lexeme (less precisely, a word) that consists of more than one stem. Compounding or composition is the word-formation that creates compound lexemes (the other word-formation process being derivation). Compounding or Word-compounding refers to the faculty and device of language to form new words by combining or putting toget...

  20. Raman scattering in transition metal compounds: Titanium and compounds of titanium

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, J.; Ederer, D.L.; Shu, T. [Tulane Univ., New Orleans, LA (United States)] [and others

    1997-04-01

    The transition metal compounds form a very interesting and important set of materials. The diversity arises from the many states of ionization the transition elements may take when forming compounds. This variety provides ample opportunity for a large class of materials to have a vast range of electronic and magnetic properties. The x-ray spectroscopy of the transition elements is especially interesting because they have unfilled d bands that are at the bottom of the conduction band with atomic like structure. This group embarked on the systematic study of transition metal sulfides and oxides. As an example of the type of spectra observed in some of these compounds they have chosen to showcase the L{sub II, III} emission and Raman scattering in some titanium compounds obtained by photon excitation.

  1. Preparation of radioactive labelled compounds Pt.1. 82Br labelled organic bromine compounds

    International Nuclear Information System (INIS)

    Otto, R.

    1988-05-01

    A simple method allowing the preparation of 82 Br labelled organic bromine compounds from olefins with chemical and radiochemical yields between 75 and 95% and the specific activities required, is described [fr

  2. Chemical Reductive Transformations of Synthetic Organic Compounds. Probe Compound Studies and Mechanistic Modeling

    National Research Council Canada - National Science Library

    Peyton, Gary

    2001-01-01

    Advanced Oxidation Processes (AOPs) can be used to selectively remove DNT (2,4-dinitrotoluene) from a complex waste stream by adding a precursor compound such as ethanol, which forms a reducing radical upon reaction with hydroxyl radical...

  3. Degradation of air polluted by organic compounds

    International Nuclear Information System (INIS)

    Santoyo O, E.L.; Lizama S, B.E.; Vazquez A, O.; Luna C, P.C.; Arredondo H, S.

    1999-01-01

    According to the Mexican standard NOM-010-STPS-1994 it has been established concentrations of maximum permissible levels in workable air for styrene in the range 420-1710 mg/m 3 and for xylene between 218-870 mg/m 3 . In this work it is studied a biological treatment (bio filtration) for air polluted by xylene and styrene where the microorganisms are adhered at synthetic fiber, these degrade to the organic compounds that across in gaseous state and they are mineralized toward CO 2 and H 2 O. The characteristics of temperature, p H, concentration of organic compound and mineral parameters, as well as, the biomass quantity have been optimized for that bio filters efficiency were greater than those reported in other works. (Author)

  4. Homologation Reaction of Ketones with Diazo Compounds.

    Science.gov (United States)

    Candeias, Nuno R; Paterna, Roberta; Gois, Pedro M P

    2016-03-09

    This review covers the addition of diazo compounds to ketones to afford homologated ketones, either in the presence or in the absence of promoters or catalysts. Reactions with diazoalkanes, aryldiazomethanes, trimethylsilyldiazomethane, α-diazo esters, and disubstituted diazo compounds are covered, commenting on the complex regiochemistry of the reaction and the nature of the catalysts and promoters. The recent reports on the enantioselective version of ketone homologation reactions are gathered in one section, followed by reports on the use of cyclic ketones ring expansion in total synthesis. Although the first reports of this reaction appeared in the literature almost one century ago, the recent achievements, in particular, for the asymmetric version, forecast the development of new breakthroughs in the synthetically valuable field of diazo chemistry.

  5. Compound Composite Odontoma and Its Management

    Directory of Open Access Journals (Sweden)

    Morawala Abdul

    2014-01-01

    Full Text Available Odontomas are odontogenic benign tumors composed of dental tissue. Majority of these lesions are asymptomatic and are often detected on routine radiographs. They can be thought of as “tooth hamartomas" with the lesion consisting of various tooth components. They are divided histologically into complex odontomas and compound odontomas. This paper describes the case of a compound odontoma in a 13-year-old girl diagnosed due to the retention of the primary right mandibular second molar. A surgical excision was performed without disturbing the unerupted premolar. The results achieved indicate that early diagnosis of odontomas enables adoption of less complex treatment, a better prognosis, and displacement or devitalisation of adjacent tooth.

  6. Optical spectroscopy of f-element compounds

    International Nuclear Information System (INIS)

    Carnall, W.T.

    1978-01-01

    It is noted that the energies and intensities of transitions observed in the optical spectra of lanthanide (Ln) and actinide (An) compounds can typically be measured with a high degree of accuracy. The observed transitions can then be directly represented as upper state energy levels where the structure is induced by the environment. A discussion is presented of the systematic theoretical interpretation of these transitions both in terms of energy level structure and transition probability. Particularly for the trivalent lanthanides and actinides, the detail to which the interpretation can be carried is unique in the periodic table. The electronic structure of organometallic lanthanides and actinides is emphasized in the discussion. It is made clear that this type of ligand does not present any unique interpretive problems. The basic framework of the interpretation is not dependent upon the specific ionic environment. On the other hand, organometallic compounds represent a particularly interesting group in which to study excited state relaxation

  7. Sublimation thermodynamics of four fluoroquinolone antimicrobial compounds

    International Nuclear Information System (INIS)

    Blokhina, Svetlana; Sharapova, Angelica; Ol’khovich, Marina; Perlovich, German

    2017-01-01

    Highlights: • The vapor pressures of ciprofloxacin, enrofloxacin, norfloxacin and levofloxacin were measured. • The values of enthalpies, entropies and Gibbs energies of sublimation were calculated at T = 298.15 K. • Thermophysical characteristics of the studied compounds were determined. • The influence hydrogen bonds in crystal lattices on the sublimation enthalpy was discussed. - Abstract: The transpiration method was used to measure the vapor pressures as a function of temperature of the following antimicrobial drugs: ciprofloxacin, enrofloxacin, norfloxacin and levofloxacin. Based on these results standard molar enthalpies, entropies and Gibbs energies of sublimation at T = 298.15 K were calculated and a correlation between the crystal lattice energy and the saturation vapor pressure in a number of fluoroquinolones was found. The thermophysical characteristics of the compounds studied were determined by DSC. The influence of different structural fragments of molecules substituents and the effects of hydrogen bonds in crystal lattices on the sublimation enthalpy was discussed.

  8. Screening Some Plants for their Antiproliferative Compounds

    Directory of Open Access Journals (Sweden)

    Ufuk Kolak

    2012-03-01

    Full Text Available This paper covers the screening of the secondary plant products to find a cure against cancer which were piled up during the years. In early stages of these studies highly active antitumor glycoproteins were obtained from native Arizona (USA plants. Later smaller molecules were isolated showing antitumor activity in different test systems. Among these compounds sesquiterpene lactones with an exo-methylene group in the lactone ring, unsaturated diterpenoids and some triterpenoids exhibited activity in vivo and in vitro test systems. A few Colchicum alkaloids showed high activity against murine lymphocytic leukemia (P388. Activity also established in some flavonoidal compounds. Today all around the world research on Natural Products is still going on.

  9. Parity violation in the compound nucleus

    International Nuclear Information System (INIS)

    Bowman, J.D.; Frankle, C.M.; Green, A.A.

    1994-01-01

    The status of parity violation in the compound nucleus is reviewed. The results of previous experimental results obtained by scattering polarized epithermal neutrons from heavy nuclei in the 3-p and 4-p p-wave strength function peaks are presented. Experimental techniques are presented. The extraction of the mean squared matrix element of the parity-violating interaction, M 2 , between compound-nuclear levels and the relationship of M 2 to the coupling strengths in the meson exchange weak nucleon-nucleon potential are discussed. The tendency of measured asymmetries to have a common sign and theoretical implications are discussed. New experimental results are presented that show that the common sign phenomenon is not universal, as theoretical models developed up to now would predict

  10. Quaternary ammonium compounds – New occupational hazards

    Directory of Open Access Journals (Sweden)

    Agnieszka Lipińska-Ojrzanowska

    2014-10-01

    Full Text Available Quaternary ammonium compounds (QACs, quats belong to organic ionic chemical agents which display unique properties of both surfactants and disinfectants. Their wide distribution in the work environment and also in private households brings about new occupational hazards. This paper reviews reports about the health effects of QACs. QACs could play a role of sensitizers and irritants to the skin and mucous membranes. It is suspected that particular QACs can display an immunologic crossreactivity between each other and with other chemical compounds containing ammonium ion, such as muscle relaxants widely used in anesthesia. They may promote the development of airway allergy, however, the background mechanisms are still unclear and need to be further investigated. Until now, a few cases of occupational asthma induced by QACs have been described and their involvement in contact dermatitis has been documented. The possibility of anaphylaxis due to QACs cannot be excluded as well. Med Pr 2014;65(5:675–682

  11. Synthesis of organic compounds 15 N enriched

    International Nuclear Information System (INIS)

    Oliveira, Claudineia Raquel de; Bendassolli, Jose Albertino; Prestes, Clelber Vieira; Tavares, Glauco Arnold

    2002-01-01

    The aim of this work was to develop urea- 15 N and glycine- 15 N synthesis for agronomic and biological studies. The production of these compounds was evaluated due to the fact of increasing use of urea, comparing to others solid fertilizers and the importance of glycine in the studies of protein metabolism. A non-conventional method was carried out to synthesize urea. The process involved reaction among Co, NH 3 anidrid and S at low temperature (100 deg C) and of pressure (0,81 mPa) compared to the conventional method. Monolise halets reaction was carried out for glycine synthesis with chloroacetic and ammonia 2 deg C. Both compounds are economic viable, they can be produced at a lower price than the trade market one. (author)

  12. Intercalation compounds involving inorganic layered structures

    Directory of Open Access Journals (Sweden)

    CONSTANTINO VERA R. L.

    2000-01-01

    Full Text Available Two-dimensional inorganic networks can shown intracrystalline reactivity, i.e., simple ions, large species as Keggin ions, organic species, coordination compounds or organometallics can be incorporated in the interlayer region. The host-guest interaction usually causes changes in their chemical, catalytic, electronic and optical properties. The isolation of materials with interesting properties and making use of soft chemistry routes have given rise the possibility of industrial and technological applications of these compounds. We have been using several synthetic approaches to intercalate porphyrins and phthalocyanines into inorganic materials: smectite clays, layered double hydroxides and layered niobates. The isolated materials have been characterized by elemental and thermal analysis, X-ray diffraction, surface area measurements, scanning electronic microscopy, electronic and resonance Raman spectroscopies and EPR. The degree of layer stacking and the charge density of the matrices as well their acid-base nature were considered in our studies on the interaction between the macrocycles and inorganic hosts.

  13. Analysis of cell death inducing compounds

    DEFF Research Database (Denmark)

    Spicker, Jeppe; Pedersen, Henrik Toft; Nielsen, Henrik Bjørn

    2007-01-01

    Biomarkers for early detection of toxicity hold the promise of improving the failure rates in drug development. In the present study, gene expression levels were measured using full-genome RAE230 version 2 Affymetrix GeneChips on rat liver tissue 48 h after administration of six different compounds......), ornithine aminotransferase (OAT) and Cytochrome P450, subfamily IIC (mephenytoin 4-hydroxylase) (Cyp2C29). RT-PCR for these three genes was performed and four additional compounds were included for validation. The quantitative RT-PCR analysis confirmed the findings based on the microarray data and using...... the three genes a classification rate of 55 of 57 samples was achieved for the classification of not toxic versus toxic. The single most promising biomarker (OAT) alone resulted in a surprisingly 100% correctly classified samples. OAT has not previously been linked to toxicity and cell death...

  14. Magnetic resonance studies of intercalation compounds

    International Nuclear Information System (INIS)

    Miller, G.R.

    1990-01-01

    During the last three or four years, nearly tow hundred papers have been published that used NMR or ESR spectroscopy to study compounds formed by the intercalation of molecules or ions into the van der Waals gap of a layered hast compound. The host lattices have ranged from the simple, such as graphite, to the complex, such as clay. In many cases, magnetic resonance techniques now enable one to obtain quite detailed information on even fairly complex intercalated species, on the nature of the changes in the host lattice accompanying intercalation, and on the nature of the interactions between the intercalant species and the host lattice. Magnetic resonance is used in conunction with many other techniques to obtain a fuller picture of these interesting systems, but this review will limit its focus to the use of NMR and ESR techniques. (author). 51 refs

  15. Selective Oxidation of Lignin Model Compounds.

    Science.gov (United States)

    Gao, Ruili; Li, Yanding; Kim, Hoon; Mobley, Justin K; Ralph, John

    2018-05-02

    Lignin, the planet's most abundant renewable source of aromatic compounds, is difficult to degrade efficiently to welldefined aromatics. We developed a microwave-assisted catalytic Swern oxidation system using an easily prepared catalyst, MoO 2 Cl 2 (DMSO) 2 , and DMSO as the solvent and oxidant. It demonstrated high efficiency in transforming lignin model compounds containing the units and functional groups found in native lignins. The aromatic ring substituents strongly influenced the selectivity of β-ether phenolic dimer cleavage to generate sinapaldehyde and coniferaldehyde, monomers not usually produced by oxidative methods. Time-course studies on two key intermediates provided insight into the reaction pathway. Owing to the broad scope of this oxidation system and the insight gleaned with regard to its mechanism, this strategy could be adapted and applied in a general sense to the production of useful aromatic chemicals from phenolics and lignin. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Thermodynamic Properties of Actinides and Actinide Compounds

    Science.gov (United States)

    Konings, Rudy J. M.; Morss, Lester R.; Fuger, Jean

    The necessity of obtaining accurate thermodynamic quantities for the actinide elements and their compounds was recognized at the outset of the Manhattan Project, when a dedicated team of scientists and engineers initiated the program to exploit nuclear energy for military purposes. Since the end of World War II, both fundamental and applied objectives have motivated a great deal of further study of actinide thermodynamics. This chapter brings together many research papers and critical reviews on this subject. It also seeks to assess, to systematize, and to predict important properties of the actinide elements, ions, and compounds, especially for species in which there is significant interest and for which there is an experimental basis for the prediction.

  17. Brazilian gorgonians: a source of odoriferous compounds?

    Directory of Open Access Journals (Sweden)

    Silvia Siag Oigman

    Full Text Available Abstract The gorgonian Phyllogorgia dilatata Esper is an octocoral known to be source of biologically active terpenes. In this study, odoriferous compounds present in P. dilatata tissues were investigated, due to their exotic olfactory notes. The search of volatile compounds was performed in a dichloromethane/methanol extract submitted to a silica gel vacuum chromatography and HPLC, yielding the isomers (Z,E and (E,E-germacrones, identified by GC/MS, 1 and 2D NMR. The stereochemistry of (E,E-germacrone, as well as its preferred conformation, was confirmed by NOESY. Sensory analysis of the two isomers revealed a fragrant, citrus, woody and weak marine odor, similar to the odor of the natural gorgonian, and (E,E-germacrone has a three times more intense aroma than the (Z,E isomer.

  18. Oxyfluoride Chemistry of Layered Perovskite Compounds

    Directory of Open Access Journals (Sweden)

    Yoshihiro Tsujimoto

    2012-03-01

    Full Text Available In this paper, we review recent progress and new challenges in the area of oxyfluoride perovskite, especially layered systems including Ruddlesden-Popper (RP, Dion-Jacobson (DJ and Aurivillius (AV type perovskite families. It is difficult to synthesize oxyfluoride perovskite using a conventional solid-state reaction because of the high chemical stability of the simple fluoride starting materials. Nevertheless, persistent efforts made by solid-state chemists have led to a major breakthrough in stabilizing such a mixed anion system. In particular, it is known that layered perovskite compounds exhibit a rich variety of O/F site occupation according to the synthesis used. We also present the synthetic strategies to further extend RP type perovskite compounds, with particular reference to newly synthesized oxyfluorides, Sr2CoO3F and Sr3Fe2O5+xF2−x (x ~ 0.44.

  19. Organochlorine compounds: Progress and results to date

    International Nuclear Information System (INIS)

    Villeneuve, J.P.; Marchand, M.; Elder, D.; Fowler, S.W.; LaRosa, J.; Duursma, E.K.; Vas, D.; Parsi, P.

    1976-01-01

    Following preparation of reference materials 1 through 4 (1. Oyster homogenate (MA-M-1), 2. Sea Plant homogenate (SP-M-1), 3. Sediment (SD-M-1), 4. XAD-2 resin (AB-M-1)), homogeneity tests were conducted at the Monaco Laboratory by analyzing sample sizes that would yield sufficient amounts of organochlorine compounds for quantitation. In the case of the oyster sample, 10 samples weighing 10 grams each showed acceptable homogeneity for all compounds determined, i.e. a standard deviation of ≈ ± 20% from the mean value obtained. The highest standard deviation was observed for pp'DDE (23%) while the lowest standard deviation was recorded for pp'DDT (2.8%)

  20. Radiation damage calculations for compound materials

    International Nuclear Information System (INIS)

    Greenwood, L.R.

    1990-01-01

    This paper reports on the SPECOMP computer code, developed to calculate neutron-induced displacement damage cross sections for compound materials such as alloys, insulators, and ceramic tritium breeders for fusion reactors. These new calculations rely on recoil atom energy distributions previously computed with the DISCS computer code, the results of which are stored in SPECTER computer code master libraries. All reaction channels were considered in the DISCS calculations and the neutron cross sections were taken from ENDF/B-V. Compound damage calculations with SPECOMP thus do not need to perform any recoil atom calculations and consequently need no access to ENDF or other neutron data bases. The calculations proceed by determining secondary displacements for each combination of recoil atom and matrix atom using the Lindhard partition of the recoil energy to establish the damage energy

  1. Radiation damage calculations for compound materials

    International Nuclear Information System (INIS)

    Greenwood, L.R.

    1989-01-01

    Displacement damage calculations can be performed for 40 elements in the energy range up to 20 MeV with the SPECTER computer code. A recent addition to the code, called SPECOMP, can intermix atomic recoil energy distributions for any four elements to calculate the proper displacement damage for compound materials. The calculations take advantage of the atomic recoil data in the SPECTER libraries, which were determined by the DISCS computer code, using evaluated neutron cross section and angular distribution data in ENDF/B-V. Resultant damage cross sections for any compound can be added to the SPECTER libraries for the routine calculation of displacements in any given neutron field. Users do not require access to neutron cross section files. Results are presented for a variety of fusion materials and a new ceramic superconductor material. Future plans and nuclear data needs are discussed. 11 refs., 6 figs., 1 tab

  2. Determination of Phenolic Compounds in Wines

    Directory of Open Access Journals (Sweden)

    Charalampos Proestos

    2012-04-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 Wine contains natural antioxidants such as phenolic compounds also known as bioactive compounds. Samples of commercially available Greek wines were analyzed in order to determine this phenolic content. For the analysis, Reversed Phase-High Performance Liquid Chromatography (RP-HPLC coupled with a multiwavelength Ultraviolet/visible (UV/vis detector was used. The most abundant phenolic substances detected were (+-catechin (13.5-72.4 mg L-1 , gallic acid (0.40-99.47 mg L-1 and caffeic acid (0.87-33.48 mg L-1. The principal component analysis (PCA technique was used to study differentiation among wines according to their production area. Red wines contained more phenolic substances than white ones. Differences of the phenolic composition in wines of the same cultivar were investigated too.

  3. Partial purification of endogenous digitalis-like compound(s) in cord blood

    Energy Technology Data Exchange (ETDEWEB)

    Balzan, S.; Ghione, S.; Biver, P.; Gazzetti, P.; Montali, U. (C.N.R. Institute of Clinical Physiology, Pisa (Italy))

    1991-02-01

    Increasing evidence indicates the presence of endogenous digitalis-like compound(s) in human body fluids. In this preliminary report, we describe a study of the partial purification by HPLC of these compounds in the plasma of neonates (who have particularly high concentrations of this substance) and adults. Plasma samples from neonates (cord blood) and adults, lyophilized and extracted with methanol, were applied on a 300 x 3.9 mm C18 Nova Pak column and eluted with a mobile phase of acetonitrile/methanol/water (17/17/66 or 14/14/72 by vol) and, after 30 min, with 100% methanol. We assayed eluted fractions for inhibitory activity of 86Rb uptake and for digoxin-like immunoreactivity. The elution profile revealed a first peak of inhibitory activity of 86Rb uptake at the beginning of the chromatography; another peak was eluted with the 100% methanol. The two peaks also cross-reacted with antidigoxin antibodies. Because the second peak could possibly reflect the nonspecific interference of various lipophilic compounds, we focused our attention on the first peak. For these fractions dose-response curves for 86Rb uptake and for displacement of digoxin were parallel, respectively, to those of ouabain and digoxin, suggesting similarities of digoxin-like immunoreactive substance to cardiac glycosides. Similar chromatographic profiles were also obtained for plasma from adults, suggesting that the endogenous glycoside-like compound(s) in the neonate may be the same as those in the adult.

  4. Analysis of isoelectron isonuclear series of holovalent tetraelectron compounds as a system of bicomponent chemical compounds

    Energy Technology Data Exchange (ETDEWEB)

    Vigdorovich, V.N.; Dzhuraev, T.D.

    1985-03-01

    Analogs and prototypes of the compounds supplementing the system of isoelectron isonuclear series of holovalent tetraelectron compounds by Gorunova are revealed. The investigation of all series of tetraelectron ovalenthol compounds allows one to supplement the variety of known series used for regular tracing and forecasting of compound properties (series of cation and anion substitutions by isonuclear series of the A/sup 4/B/sup 4/, A/sup 3/B/sup 5/, A/sup 1/B/sup 7/ type and others compounds. The above series for medium ordinal numbers anti Z equal 10, 14, 18, 23 and 36 permit to illustrate the possibility of existence of such analogs or series, for example for the compounds of the type A/sup 3/-- B/sup 5/:AlN-BP or Z=1(f AlP-ScN-BV (for Z=14), ScP-AlV (for Z=18), GaP-AlAs-YN-BNb (for Z=23) and YAs-GaNb-InV-ScSb-LaP-AlPr (for Z=36).

  5. Analysis of isoelectron isonuclear series of holovalent tetraelectron compounds as a system of bicomponent chemical compounds

    International Nuclear Information System (INIS)

    Vigdorovich, V.N.; Dzhuraev, T.D.

    1985-01-01

    Analogs and prototypes of the compounds supplementing the system of isoelectron isonuclear series of holovalent tetraelectron compounds by Gorunova are revealed. The investigation of all series of tetraelectron ovalenthol compounds allows one to supplement the variety of known series used for regular tracing and forecasting of compound properties (series of cation and anion substitutions by isonuclear series of the A 4 B 4 , A 3 B 5 , A 1 B 7 type and others compounds. The above series for medium ordinal numbers anti Z equal 10, 14, 18, 23 and 36 permit to illustrate the possibility of existence of such analogs or series, for example for the compounds of the type A 3 -- B 5 :AlN-BP or Z=1(f AlP-ScN-BV (for Z=14), ScP-AlV (for Z=18), GaP-AlAs-YN-BNb ( for Z=23) and YAs-GaNb-InV-ScSb-LaP-AlPr (for Z=36)

  6. Nanoencapsulation of bioactive compounds for food applications

    OpenAIRE

    Sessa, Mariarenata

    2012-01-01

    2010 - 2011 The increase in dietary-intake-related illnesses, such as obesity, cardiovascular diseases, hypertension, diabetes and cancer, have made in recent years the development of health-and-wellness promoting foods a priority of the food industry. Clinical studies have demonstrated tangible health benefits that may be derived from the intake of bioactive compounds. However many difficulties are associated with their inclusion in food matrices, due to a very low solubility in water and...

  7. Measure of absorption in multistep compound processes

    International Nuclear Information System (INIS)

    Carlson, B.V.; Hussein, M.S.

    1982-01-01

    The Moldauer-Simonius theorem, that relates the modulus of the determinant of the average, optical, S-matrix, to the average width and spacing of the compound nucleus resonances, is generalized to the multiclass resonances situation encountered in pre-equilibrium reactions. Corrections to the generalized M/S theorem are seen to be connected primarily to the width distribution of the widest doorway class. (Author) [pt

  8. Multivariate fractional Poisson processes and compound sums

    OpenAIRE

    Beghin, Luisa; Macci, Claudio

    2015-01-01

    In this paper we present multivariate space-time fractional Poisson processes by considering common random time-changes of a (finite-dimensional) vector of independent classical (non-fractional) Poisson processes. In some cases we also consider compound processes. We obtain some equations in terms of some suitable fractional derivatives and fractional difference operators, which provides the extension of known equations for the univariate processes.

  9. Aromatic compounds from three Brazilian Lauraceae species

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Andrea Nastri de Luca; Batista Junior, Joao Marcos; Lopez, Silvia Noeli; Furlan, Maysa; Cavalheiro, Alberto Jose; Silva, Dulce Helena Siqueira; Bolzani, Vanderlan da Silva [UNESP, Araraquara, SP (Brazil). Inst. de Quimica. Dept. de Quimica Organica; Nunomura, Sergio Massayoshi [Instituto Nacional de Pesquisa da Amazonia (INPA), Manaus, AM (Brazil). Dept. de Produtos Naturais; Yoshida, Massayoshi [Centro de Biotecnologia da Amazonia, Manaus, AM (Brazil)

    2010-07-01

    Phytochemical investigations on three Brazilian Lauraceae species from the Cerrado region of Sao Paulo State, Ocotea corymbosa (Meins) Mez., O. elegans Mez. and Persea pyrifolia Nees and Mart. ex Nees resulted in the isolation of flavonoids, an ester of the 4-O-E-caffeoylquinic acid, an aromatic sesquiterpene besides furofuran lignans. This is the first chemical study on the leaves of Ocotea elegans and O. corymbosa as well as the first report of non-volatile compounds from Persea pyrifolia. (author)

  10. Aromatic compounds from three Brazilian Lauraceae species

    International Nuclear Information System (INIS)

    Batista, Andrea Nastri de Luca; Batista Junior, Joao Marcos; Lopez, Silvia Noeli; Furlan, Maysa; Cavalheiro, Alberto Jose; Silva, Dulce Helena Siqueira; Bolzani, Vanderlan da Silva

    2010-01-01

    Phytochemical investigations on three Brazilian Lauraceae species from the Cerrado region of Sao Paulo State, Ocotea corymbosa (Meins) Mez., O. elegans Mez. and Persea pyrifolia Nees and Mart. ex Nees resulted in the isolation of flavonoids, an ester of the 4-O-E-caffeoylquinic acid, an aromatic sesquiterpene besides furofuran lignans. This is the first chemical study on the leaves of Ocotea elegans and O. corymbosa as well as the first report of non-volatile compounds from Persea pyrifolia. (author)

  11. Voltammetric determination of zirconium using azo compounds

    International Nuclear Information System (INIS)

    Orshulyak, O.O.; Levitskaya, G.D.

    2008-01-01

    The optimum conditions for zirconium complexation with azo compounds are found. The applicability of Eriochrome Red B, Calcon, and Calcion to the voltammetric determination of zirconium, total Zr(IV) and Hf(IV), and Zr(IV) in the presence of Zn(II), Cu(II), Cd(II), Ni(II), or Ti(IV) is demonstrated. The developed procedures are used to determine zirconium in a terbium alloy and in an alloy for airplane wheel drums [ru

  12. Bioactive Compounds in Functional Meat Products

    OpenAIRE

    Ewelina Pogorzelska-Nowicka; Atanas G. Atanasov; Jarosław Horbańczuk; Agnieszka Wierzbicka

    2018-01-01

    Meat and meat products are a good source of bioactive compounds with positive effect on human health such as vitamins, minerals, peptides or fatty acids. Growing food consumer awareness and intensified global meat producers competition puts pressure on creating new healthier meat products. In order to meet these expectations, producers use supplements with functional properties for animal diet and as direct additives for meat products. In the presented work seven groups of key functional cons...

  13. Nuclear alignment following compound nucleus reactions

    International Nuclear Information System (INIS)

    Butler, P.A.; Nolan, P.J.

    1981-01-01

    A procedure for calculating the alignment of a nuclear state populated by a compound nucleus reaction is given and used to investigate how alignment varies for different types of population mechanisms. The calculations are compared to both predictions of Gaussian models for the state population distribution and to experimental data, for a variety of types of nuclear reactions. The treatment of alignment in the analysis of γ-ray angular distribution is discussed. (orig.)

  14. REVIEW PAPER-MARINE MICROBIAL BIOACTIVE COMPOUNDS

    OpenAIRE

    Kalyani. P*, Hemalatha. K. P. J

    2016-01-01

    Oceans have borne most of the biological activities on our planet. A number of biologically active compounds with varying degrees of action, such as anti-tumor, anti-cancer, anti-microtubule, anti-proliferative, cytotoxic, photo protective, as well as antibiotic and antifouling properties, have been isolated to date from marine sources. The marine environment also represents a largely unexplored source for isolation of new microbes (bacteria, fungi, actinomycetes, microalgae-cyanobacteria and...

  15. Debye classes in A15 compounds

    International Nuclear Information System (INIS)

    Staudenmann, J.; DeFacio, B.; Testardi, L.R.; Werner, S.A.; Fluekiger, R.; Muller, J.

    1981-01-01

    The comparison between electron charge-density distribution of V 3 Si, Cr 3 Si, and V 3 Ge at room temperature leads us to study the Debye temperatures at 0 0 K THETA 0 from specific-heat measurements for over 100 A15 compounds. A phenomenological THETA 0 (M), M the molecular mass, is obtained from the static scaling relation THETA 0 (M) = aM/sup b/ and this organizes all of the data into five Debye classes: V(V 3 Si), V-G, G(V 3 Ge), G-C, and C(Cr 3 Si). In contrast, the Debye temperature THETA 0 (V), with V as the unit-cell volume does not relate alloys as THETA 0 (M) does, with the exception of the C class. This latter case leads to the surprising result MproportionalV/sup approximately1/3/ and to a Grueneisen constant of 1.6 +- 0.1 for all compounds of this class. In the V class where V 3 Si and Nb 3 Sn are found, THETA 0 (V) labels these two alloys differently, as does their martensitic c/a ratios. With T-bar/sub c/ denoting the average superconducting transition temperature within a Debye class, interesting correlations are shown. One is the maximum of T-bar/sub c/ which exists in the V class where the strongest anharmonicity occurs. Another is the case of compounds formed only by transition elements up to and including Au. This interesting case shows that approx.3.2< T-bar/sub c/< approx.5.0 K in all of the five classes and that there is no correlation between T/sub c/ and the thermal properties. The implications of these observations for creating better models for the A15 compounds are briefly discussed

  16. Applications of chiroptical spectroscopy to coordination compounds

    Czech Academy of Sciences Publication Activity Database

    Wu, Tao; You, X. Z.; Bouř, Petr

    2015-01-01

    Roč. 284, SI (2015), s. 1-18 ISSN 0010-8545 R&D Projects: GA ČR GA13-03978S; GA ČR GAP208/11/0105 Grant - others:GA AV ČR(CZ) M200550902 Institutional support: RVO:61388963 Keywords : chirality * coordination compounds * chiroptical spectroscopy * new materials Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 12.994, year: 2015

  17. Photocatalytic fluoroalkylation reactions of organic compounds

    OpenAIRE

    Barata Vallejo, Sebastian; Bonesi, Sergio Mauricio; Postigo, Jose Alberto

    2017-01-01

    Photocatalytic methods for fluoroalkyl-radical generation provide more convenient alternatives to the classical perfluoroalkyl-radical (Rf) production through chemical initiators, such as azo or peroxide compounds or the employment of transition metals through a thermal electron transfer (ET) initiation process. The mild photocatalytic reaction conditions tolerate a variety of functional groups and, thus, are handy to the late-stage modification of bioactive molecules. Transition metal-photoc...

  18. Minor lipophilic compounds in edible insects

    OpenAIRE

    Monika Sabolová; Anna Adámková; Lenka Kouřimská; Diana Chrpová; Jan Pánek

    2016-01-01

    Contemporary society is faced with the question how to ensure suffiecient nutrition (quantity and quality) for rapidly growing population. One solution can be consumption of edible insect, which can have very good nutritional value (dietary energy, protein, fatty acids, fibers, dietary minerals and vitamins composition). Some edible insects species, which contains a relatively large amount of fat, can have a potential to be a „good" (interesting, new) source of minor lipophilic compound...

  19. Methanogenic Transformation of Methylfurfural Compounds to Furfural

    OpenAIRE

    Boopathy, R.

    1996-01-01

    The metabolic conversion of 5-methylfurfural and 2-methylfurfural to furfural by a methanogenic bacterium, Methanococcus sp. strain B, was studied. This bacterium was found to use methylfurfural compounds as a growth substrate and to convert them stoichiometrically to furfural. For every mole of methylfurfurals metabolized, almost 1 mol of furfural and 0.7 mol of methane were produced. Several methanogenic bacteria did not carry out this conversion. The metabolic conversion of methylfurfurals...

  20. Two new compounds from Helichrysum arenarium (L.).

    Science.gov (United States)

    Zhang, Yu-Wei; Sun, Wu-Xing; Li, Xian; Zhao, Chun-Chao; Meng, Da-Li; Li, Ning

    2009-01-01

    Two new compounds were isolated from the whole plant of Helichrysum arenarium (L.) Moench. By means of spectroscopic data (IR, UV, 1D and 2D NMR, HR-MS, ESI-MS, and NOESY) and chemical evidence, the structures were established as 6,7-dimethoxy-4-hydroxy-1-naphthoic acid (1) and (Z)-5-hydroxy-7-methoxy-4-[3-methyl-4-(O-beta-D-xylopyranosyl)but-2-enyl]isobenzofuran-1(3H)-one (2).

  1. Parity violation in the compound nucleus

    International Nuclear Information System (INIS)

    Mitchell, G. E.; Crawford, B. E.; Grossmann, C. A.; Lowie, L. Y.; Bowman, J. D.; Knudson, J.; Penttilae, S.; Seestrom, S. J.; Smith, D. A.; Yen, Yi-Fen; Yuan, V. W.; Delheij, P. P. J.; Haseyama, T.; Masaike, A.; Matsuda, Y.; Postma, H.; Roberson, N. R.; Sharapov, E. I.; Stephenson, S. L.

    1999-01-01

    Measurements have been performed on the helicity dependence of the neutron resonance cross section for many nuclei by our TRIPLE Collaboration. A large number of parity violations are observed. Generic enhancements amplify the signal for symmetry breaking and the stochastic properties of the compound nucleus permit the strength of the symmetry-breaking interaction to be determined without knowledge of the wave functions of individual states. A total of 15 nuclei have been analyzed with this statistical approach. The results are summarized

  2. Preparation of 125I labelled compound

    International Nuclear Information System (INIS)

    Rafii, H.; Beiki, D.; Matlubi, M.; Jalilian, A.R.; Motamedi, F.; Karimian, A.R.; Najafi, R.; Babaei, M.; Kamali Dehghan, M.; Shah-Hossaini, G.R.; Shafahi, S.K.; Keshavarzi, F.

    2002-01-01

    Iodinated compounds with 131 I, 125 I and 123 I have been widely used for biochemical function studies. In conjunction with SPECT, [ 123 I] labelled proteins have various diagnostic and therapeutic applications in nuclear medicine. In this study, synthesis and quality control of [ 18 F]radiofluorinated and radioiodinated of some proteins and peptides as well as their biological behaviors are considered to be investigated. (author)

  3. Infrared spectroscopy of some organocobalt (III) compounds

    International Nuclear Information System (INIS)

    Benedetti, A.V.; Mauro, A.E.

    1982-01-01

    The compounds [MeCo(DH) 2 py], [MeCo(DH) 2 H 2 O] (M = methyl; DH = dimethyl-glyoxymate; py = pyridine) and others of general formulae [Co(L)(H 2 O) 2 ] ClO 4 , where L = SALOPHEN = bis (salicylaldehyde)-o-phenylenediimine; SALCN = 1,2-bis (salicylaldehyde) cyclohexylenediimine; SALEN = bis (salicylaldehyde) ethylenediimine; BAE = bis (acetylacetone)-ethylenediimine were synthesized and studied by infrared spectroscopy. The frequencies observed have been assigned to specific group vibrations. (Author) [pt

  4. Compounds of Fe-Zn bond

    International Nuclear Information System (INIS)

    Mauro, A.E.; Mancini, M.N.G.

    1981-01-01

    The compounds of the type L 1 L 2 ZnFe(CO) 4 , not yet reported, are synthesized and studied by infrared spectroscopy. The data are interpreted based on a monomeric structure with a local C sub(3v) symmetry around the iron atom. L 1 = methylamine (Mea), dimethylamine (diMea), trimethylamine (triMea) L 2 = ethylenediamine (en), N-methylethylenediamine (N,Meen), N,N-dimethylenthylenediamines, (s-diMeen). (Author) [pt

  5. Contribution to the study of physico-chemical properties of surfaces modified by laser treatment. Application to the enhancement of localized corrosion resistance of stainless steels; Contribution a l'etude des proprietes physico-chimiques des surfaces modifiees par traitement laser. Application a l'amelioration de la resistance a la corrosion localisee des aciers inoxydables

    Energy Technology Data Exchange (ETDEWEB)

    Pacquentin, W.

    2011-11-25

    integrite sur des periodes de plus en plus longues. L'objectif de ce travail de these est d'evaluer le potentiel d'un traitement de refusion laser pour ameliorer la resistance a la corrosion d'un acier inoxydable de type 304L; l'utilisation du laser dans le domaine des traitements de surface constituant un procede en pleine evolution a cause des changements recents dans la technologie des lasers. Dans le cadre de ce travail, le choix du laser s'est porte sur un laser nano-impulsionnel a fibre dopee ytterbium dont les caracteristiques permettent la fusion quasiinstantanee sur quelques microns de la surface traitee, immediatement suivie d'une solidification ultra-rapide avec des vitesses de refroidissement pouvant atteindre 1011 K/s. La combinaison de ces processus favorise l'elimination des defauts surfaciques, la formation de phases hors equilibre, la segregation d'elements chimiques et la formation d'une nouvelle couche d'oxyde dont les proprietes sont gouvernees par les parametres laser. Afin de les correler avec la reactivite electrochimique de la surface, l'influence de deux parametres laser sur les proprietes physicochimiques de la surface a ete etudiee: la puissance du laser et le taux de recouvrement des impacts laser. Pour clarifier ces relations, la resistance a la corrosion par piquration des surfaces traitees a ete determinee par des tests electrochimiques. Pour des parametres laser specifiques, le potentiel de piquration d'un acier inoxydable de type 304L augmente de plus de 500 mV traduisant ainsi une meilleure tenue a la corrosion localisee en milieu chlorure. L'interdependance des differents phenomenes resultant du traitement laser a rendu complexe la hierarchisation de leur effet sur la sensibilite de l'alliage teste. Cependant, il a ete montre que la nature de l'oxyde thermique forme au cours de la refusion laser et ses defauts sont du premier ordre pour l'amorcage des

  6. The Role of Attrition and Solids Recovery in a Chemical Looping Combustion Process Effet de l’attrition et de la récupération des particules dans le procédé de combustion en boucle chimique

    Directory of Open Access Journals (Sweden)

    Kramp M.

    2011-05-01

    Full Text Available In the present work, the steady-state behavior of a Chemical Looping Combustion process of interconnected fluidized bed reactors is simulated. The simulations have been carried out in two different scales, 50 kWth and 100 MWth. Attrition model derived from small scale laboratory experiments has been employed for the prediction of the process behavior in terms of attrition and Oxygen Carrier loss. Information on Oxygen Carrier characteristics and reaction kinetics were taken from literature. Realistic circulation mass flows of Oxygen Carrier particles are obtained and Oxygen Carrier losses are quantified. The large scale process looses significantly more Oxygen Carrier than the small scale process based on the same amount of thermal energy produced. Incomplete conversion in the air reactor could be identified as a critical point. Another issue is the fuel gas bypassing the Oxygen Carrier particles through bubbles in the large scale process which leads to lowered fuel conversions. The simulations indicate that a similar performance of a pilot scale and a large scale process is not guaranteed due to the scale-up effect on fluid dynamics. Furthermore, the simulations allow an assessment of the influence of the quality of the solids recovery system on the Oxygen Carrier loss. The distribution of the losses between possible origins is investigated and different changes in the solids recovery system are discussed regarding their potential to decrease the Oxygen Carrier loss. For example, the addition of a second-stage cyclone after the air reactor of the large scale process reduces the Oxygen Carrier loss significantly. Le présent travail propose un modèle de simulation en continu du procédé de combustion en boucle chimique constitué de deux lits fluidisés interconnectés. Les simulations ont été conduites à deux échelles 50 kWth correspondant à une installation pilote et 100 MWth correspondant à une installation industrielle. Un modèle d

  7. Steroidal Compounds in Commercial Parenteral Lipid Emulsions

    Science.gov (United States)

    Xu, Zhidong; Harvey, Kevin A.; Pavlina, Thomas; Dutot, Guy; Hise, Mary; Zaloga, Gary P.; Siddiqui, Rafat A.

    2012-01-01

    Parenteral nutrition lipid emulsions made from various plant oils contain steroidal compounds, called phytosterols. During parenteral administration of lipid emulsions, phytosterols can reach levels in the blood that are many fold higher than during enteral administration. The elevated phytosterol levels have been associated with the development of liver dysfunction and the rare development of liver failure. There is limited information available in the literature related to phytosterol concentrations in lipid emulsions. The objective of the current study was to validate an assay for steroidal compounds found in lipid emulsions and to compare their concentrations in the most commonly used parenteral nutrition lipid emulsions: Liposyn® II, Liposyn® III, Lipofundin® MCT, Lipofundin® N, Structolipid®, Intralipid®, Ivelip® and ClinOleic®. Our data demonstrates that concentrations of the various steroidal compounds varied greatly between the eight lipid emulsions, with the olive oil-based lipid emulsion containing the lowest levels of phytosterols and cholesterol, and the highest concentration of squalene. The clinical impression of greater incidences of liver dysfunction with soybean versus MCT/LCT and olive/soy lipid emulsions may be reflective of the levels of phytosterols in these emulsions. This information may help guide future studies and clinical care of patients with lipid emulsion-associated liver dysfunction. PMID:23016123

  8. Bioactive compounds in different acerola fruit cultivares

    Directory of Open Access Journals (Sweden)

    Flávia Aparecida de Carvalho Mariano-Nasser

    2017-08-01

    Full Text Available The increased consumption of acerola in Brazil was triggered because it is considered as a functional food mainly for its high ascorbic acid content, but the fruit also has high nutritional value, high levels of phenolic compounds, total antioxidant activity, anthocyanins and carotenoids in its composition. The objective was to evaluate the chemical, physical-chemical and antioxidant activity of eight varieties of acerola tree. The acerolas used in the research were the harvest 2015, 8 varieties: BRS 235 - Apodi, Mirandópolis, Waldy - CATI 30, BRS 238 - Frutacor, Okinawa, BRS 236 - Cereja, Olivier and BRS 237 - Roxinha, from the Active Bank Germplasm APTA Regional Alta Paulista in Adamantina - SP. Avaluated the following attributes: pH, titratable acidity, soluble solids, reducing sugar, instrumental color, ascorbic acid, total phenolics, flavonoids and antioxidant activity. The design was completely randomized, 8 varieties and 3 replications of 20 fruits each. Acerola fruit of the analyzed varieties prove to be good sources of phenolic compounds and antioxidant activity, ensuring its excellent nutritional quality relative to combat free radicals. The variety BRS 236 - Cereja presents higher ascorbic acid content, antioxidant activity and phenolic compounds, and the lowest value for flavonoid, which was higher than the other cultivars, especially Olivier and Waldy CATI-30.

  9. Aldose reductase inhibitory compounds from Xanthium strumarium.

    Science.gov (United States)

    Yoon, Ha Na; Lee, Min Young; Kim, Jin-Kyu; Suh, Hong-Won; Lim, Soon Sung

    2013-09-01

    As part of our ongoing search for natural sources of therapeutic and preventive agents for diabetic complications, we evaluated the inhibitory effects of components of the fruit of Xanthium strumarium (X. strumarium) on aldose reductase (AR) and galactitol formation in rat lenses with high levels of glucose. To identify the bioactive components of X. strumarium, 7 caffeoylquinic acids and 3 phenolic compounds were isolated and their chemical structures were elucidated on the basis of spectroscopic evidence and comparison with published data. The abilities of 10 X. strumarium-derived components to counteract diabetic complications were investigated by means of inhibitory assays with rat lens AR (rAR) and recombinant human AR (rhAR). From the 10 isolated compounds, methyl-3,5-di-O-caffeoylquinate showed the most potent inhibition, with IC₅₀ values of 0.30 and 0.67 μM for rAR and rhAR, respectively. In the kinetic analyses using Lineweaver-Burk plots of 1/velocity and 1/substrate, methyl-3,5-di-O-caffeoylquinate showed competitive inhibition of rhAR. Furthermore, methyl-3,5-di-O-caffeoylquinate inhibited galactitol formation in the rat lens and in erythrocytes incubated with a high concentration of glucose, indicating that this compound may be effective in preventing diabetic complications.

  10. Technology developments for a compound cycle engine

    Science.gov (United States)

    Bobula, George A.; Wintucky, William T.; Castor, J. G.

    1988-01-01

    The Compound Cycle Engine (CCE) is a highly turbocharged, power compounded power plant which combines the light weight pressure rise capability of a gas turbine with the high efficiency of a diesel. When optimized for a rotorcraft, the CCE will reduce fuel burned for a typical 2 hour (plus 30 min reserve) mission by 30 to 40 percent when compared to a conventional advanced technology gas turbine. The CCE can provide a 50 percent increase in range-payload product on this mission. Results of recent activities in a program to establish the technology base for a CCE are presented. The objective of this program is to research and develop those critical technologies which are necessary for the demonstration of a multicylinder diesel core in the early 1990s. A major accomplishment was the initial screening and identification of a lubricant which has potential for meeting the material wear rate limits of the application. An in-situ wear measurement system also was developed to provide accurate, readily obtainable, real time measurements of ring and liner wear. Wear data, from early single cylinder engine tests, are presented to show correlation of the in-situ measurements and the system's utility in determining parametric wear trends. A plan to demonstrate a compound cycle engine by the mid 1990s is included.

  11. Glyoxylic compounds as radiosensitizers of hypoxic cells

    International Nuclear Information System (INIS)

    Cornago, M.P.; Lopez Zumel, M.C.; Alvarez, M.V.; Izquierdo, M.C.

    1990-01-01

    The radiosensitizing effect of five glyoxal derivatives on the survival of TC-SV40 cells has been measured, under aerobic and hypoxic conditions. A toxicity study was previously performed in order to use nontoxic concentrations. The OER for the TC-SV40 cells was 2.74. None of the glyoxylic compounds showed radiosensitizing activity under aerobic conditions while in hypoxia their radiosensitizing factors decreased in the order phenylglyoxylic acid (1.68 at 8 x 10(-3) mole dm-3) greater than phenylglyoxal (1.55 at 5 x 10(-6) mole dm-3) greater than 2-2' furil (1.48 at 5 x 10(-5) mole dm-3) greater than glyoxylic acid (1.39 at 1 x 10(-3) mole dm-3) greater than glyoxal (1.30 at 5 x 10(-5) mole dm-3). The dose-modifying factors were also determined at two equimolar concentrations 5 x 10(-5) and 5 x 10(-6) mole dm-3. A concentration effect was noticed for all the compounds although their relative radiosensitizing activity kept, independently of the concentration, the same order noted above. Glyoxals with aromatic or heterocyclic rings exert a greater radiosensitization than the others. The acidic compounds have less radiosensitizing activity than their aldehydic counterparts. Interaction of these glyoxals with NPSH cellular groups was tested and the low degree of inhibition shows that this mechanism would contribute very little, if any, to the radiosensitization effect

  12. Special syntheses of certain organic iodine compounds

    International Nuclear Information System (INIS)

    Henry, R.; Debuchy, D.; Junod, E.

    1960-01-01

    The technical difficulties encountered in working on radioactive products force us to choose the simplest methods of chemical synthesis possible. For iodine compounds, two special methods have been chosen: - by using fission recoil, we can prepare simple iodine compounds such as iodobenzene or methyl iodide in high yields and having a good degree of purity. The method consists in the irradiation of mixtures of uranium oxide and benzoic acid or ammonium acetate. The iodised product is separated by distillation, after dissolving the recoil medium in a solvent. - by isotopic exchange between the inorganic iodine of different valencies and complex molecules such as Bengal pink, and diodone, it is also possible to obtain satisfactory labelling yields. These reactions have been adapted so as to give a minimum time for isotopic exchange. In the case of Bengal pink, we have found a yield of 90 per cent after 60 minutes by exchange between Nal and the organic molecule in aqueous solution in presence of hydrogen peroxide. For diodone the method proposed by Liebster has been modified so as to reduce losses during purification. The analytical methods adopted for these different compounds are described. (author) [fr

  13. Characterization of Phenolic Compounds in Wine Lees.

    Science.gov (United States)

    Zhijing, Ye; Shavandi, Amin; Harrison, Roland; Bekhit, Alaa El-Din A

    2018-03-25

    The effect of vinification techniques on phenolic compounds and antioxidant activity of wine lees are poorly understood. The present study investigated the antioxidant activity of white and red wine lees generated at early fermentation and during aging. In this study, the total phenol content (TPC), total tannin content (TTC), mean degree of polymerization (mDP), and antioxidant activities of five white and eight red wine lees samples from different vinification backgrounds were determined. The results showed that vinification techniques had a significant ( p tannin content of the samples. White wine lees had high mDP content compared with red ones. Catechin (50-62%) and epicatechin contents were the predominant terminal units of polymeric proanthocyanidin extracted from examined samples. Epigallocatechin was the predominant extension unit of white wine lees, whereas epicatechin was the predominant compound in red wine marc. The ORAC (oxygen radical absorbance capacity) assay was strongly correlated with the DPPH (α, α-diphenyl-β-picrylhydrazyl) assay, and the results showed the strong antioxidant activities associated with red wine lees (PN > 35 mg Trolox/g FDM) (PN: Pinot noir lees; FDM: Freeze-dried Material). This study indicates that tannin is one of the major phenolic compounds available in wine lees that can be useful in human and animal health applications.

  14. Compound refractive X-ray lens

    International Nuclear Information System (INIS)

    Nygren, D.R.; Cahn, R.; Cederstrom, B.; Danielsson, M.; Vestlund, J.

    2000-01-01

    An apparatus and method are disclosed for focusing X-rays. In one embodiment, his invention is a commercial-grade compound refractive X-ray lens. The commercial-grade compound refractive X-ray lens includes a volume of low-Z material. The volume of low-Z material has a first surface which is adapted to receive X-rays of commercially-applicable power emitted from a commercial-grade X-ray source. The volume of low-Z material also has a second surface from which emerge the X-rays of commercially-applicable power which were received at the first surface. Additionally, the commercial-grade compound refractive X-ray lens includes a plurality of openings which are disposed between the first surface and the second surface. The plurality of openings are oriented such that the X-rays of commercially-applicable power which are received at the first surface, pass through the volume of low-Z material and through the plurality openings. In so doing, the X-rays which emerge from the second surface are refracted to a focal point

  15. of polyphenolic compounds in Ilex Sp.

    Directory of Open Access Journals (Sweden)

    Zwyrzykowska Anna

    2015-11-01

    Full Text Available Natural compounds are an important source of desired biological activity which help to improve nutritional status, enhance productivity and bring many health benefits. The leaves of the Ilex paraguariensis (Aquifoliaceae are used for preparing a beverage known as yerba mate and represent a proven source of natural polyphenols which are known to foster biological activity with the emphasis on antioxidant properties. In present work we focused on the polyphenolic content of air-dried leaves of Ilex aquifolium L., Ilex aquifolium ‘Argentea Mariginata’, Ilex meserveae ‘Blue Angel’, and a commercially available mate as the reference product. Liquid chromatography combined with mass spectrometry (HPLC and LC-MS and thin layer chromatography (TLC, were used to establish polyphenolic substances content in aqueous methanolic extracts obtained from the biological matter. Up to 20 polyphenolic compounds were identified in the extracts, including rutin, quinic acid and its caffeoyl esters, i.e. chlorogenic acid and its isomers as well as dicaffeoyl derivatives. We took chlorogenic acid and rutin as reference compounds to quantify their levels in the extracts. It was determined that in all tested plants, high levels of these antioxidants were present. This led us to the conclusion that their leaves might serve as valuable food additives.

  16. Unstable magnetic moments in Ce compounds

    International Nuclear Information System (INIS)

    Aarts, J.

    1984-01-01

    The problems which are connected with the appearance or disappearance of local moments in metals are well reflected in the magnetic behaviour of Ce intermetallic compounds. This work describes experiments on two Ce compounds which are typical examples of unstable moment systems. The first of these is CeAl 2 which at low temperatures, shows coexistence of antiferromagnetic order and the Kondo effect. Measurements are presented of the magnetization and the susceptibility in different magnetic field and temperature regions. An analysis of these measurements, using a model for the crystal field effects, shows the agreement between the measurements and the calculations to be reasonably good for CeAl 2 , but this agreement becomes worse upon decreasing Ce concentration. A phenomenological description of the observations is given. The second compound reported on is CeCu 2 Si 2 , the first 'heavy-fermion' superconductor to be investigated. The superconducting state is possibly formed by the quasi-particles of a non-magnetic many body singlet state, and not simply by the (sd) conduction electrons. This being a novel phenomenon, a number of experiments were performed to test this picture and to obtain a detailed description of the behaviour of CeCu 2 Si 2 . Measurements of the Meissner volume, confirmed the superconductivity to be intrinsic. (Auth.)

  17. Activity of Polyphenolic Compounds against Candida glabrata

    Directory of Open Access Journals (Sweden)

    Ricardo Salazar-Aranda

    2015-09-01

    Full Text Available Opportunistic mycoses increase the morbidity and mortality of immuno-compromised patients. Five Candida species have been shown to be responsible for 97% of worldwide cases of invasive candidiasis. Resistance of C. glabrata and C. krusei to azoles has been reported, and new, improved antifungal agents are needed. The current study was designed to evaluatethe activity of various polyphenolic compounds against Candida species. Antifungal activity was evaluated following the M27-A3 protocol of the Clinical and Laboratory Standards Institute, and antioxidant activity was determined using the DPPH assay. Myricetin and baicalein inhibited the growth of all species tested. This effect was strongest against C. glabrata, for which the minimum inhibitory concentration (MIC value was lower than that of fluconazole. The MIC values against C. glabrata for myricitrin, luteolin, quercetin, 3-hydroxyflavone, and fisetin were similar to that of fluconazole. The antioxidant activity of all compounds was confirmed, and polyphenolic compounds with antioxidant activity had the greatest activity against C. glabrata. The structure and position of their hydroxyl groups appear to influence their activity against C. glabrata.

  18. Toxic organic compounds from energy production

    Energy Technology Data Exchange (ETDEWEB)

    Hites, R.A.

    1991-09-20

    The US Department of Energy's Office of Health and Environmental Research (OHER) has supported work in our laboratory since 1977. The general theme of this program has been the identification of potentially toxic organic compounds associated with various combustion effluents, following the fates of these compounds in the environment, and improving the analytical methodology for making these measurements. The projects currently investigation include: an improved sampler for semi-volatile compounds in the atmosphere; the wet and dry deposition of dioxins and furans from the atmosphere; the photodegradation and mobile sources of dioxins and furans; and the bioaccumulation of PAH by tree bark. These projects are all responsive to OHER's interest in the pathways and mechanisms by which energy-related agents move through and are modified by the atmosphere''. The projects on gas chromatographic and liquid chromatographic tandem mass spectrometry are both responsive to OHER's interest in new and more sensitive technologies for chemical measurements''. 35 refs., 9 figs.

  19. Compound refractive X-ray lens

    Science.gov (United States)

    Nygren, David R.; Cahn, Robert; Cederstrom, Bjorn; Danielsson, Mats; Vestlund, Jonas

    2000-01-01

    An apparatus and method for focusing X-rays. In one embodiment, his invention is a commercial-grade compound refractive X-ray lens. The commercial-grade compound refractive X-ray lens includes a volume of low-Z material. The volume of low-Z material has a first surface which is adapted to receive X-rays of commercially-applicable power emitted from a commercial-grade X-ray source. The volume of low-Z material also has a second surface from which emerge the X-rays of commercially-applicable power which were received at the first surface. Additionally, the commercial-grade compound refractive X-ray lens includes a plurality of openings which are disposed between the first surface and the second surface. The plurality of openings are oriented such that the X-rays of commercially-applicable power which are received at the first surface, pass through the volume of low-Z material and through the plurality openings. In so doing, the X-rays which emerge from the second surface are refracted to a focal point.

  20. Modulation of leptin resistance by food compounds.

    Science.gov (United States)

    Aragonès, Gerard; Ardid-Ruiz, Andrea; Ibars, Maria; Suárez, Manuel; Bladé, Cinta

    2016-08-01

    Leptin is mainly secreted by white adipose tissue and regulates energy homeostasis by inhibiting food intake and stimulating energy expenditure through its action in neuronal circuits in the brain, particularly in the hypothalamus. However, hyperleptinemia coexists with the loss of responsiveness to leptin in common obese conditions. This phenomenon has been defined as leptin resistance and the restoration of leptin sensitivity is considered to be a useful strategy to treat obesity. This review summarizes the existing literature on potentially valuable nutrients and food components to reverse leptin resistance. Notably, several food compounds, such as teasaponins, resveratrol, celastrol, caffeine, and taurine among others, are able to restore the leptin signaling in neurons by overexpressing anorexigenic peptides (proopiomelanocortin) and/or repressing orexigenic peptides (neuropeptide Y/agouti-related peptide), thus decreasing food intake. Additionally, some nutrients, such as vitamins A and D, can improve leptin transport through the blood-brain barrier. Therefore, food components can improve leptin resistance by acting at different levels of the leptin pathway; moreover, some compounds are able to target more than one feature of leptin resistance. However, systematic studies are necessary to define the actual effectiveness of each compound. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.