WorldWideScience

Sample records for composite-step product methods

  1. Composite-step product methods for solving nonsymmetric linear systems

    Energy Technology Data Exchange (ETDEWEB)

    Chan, T.F.; Szeto, T. [Univ. of California, Los Angeles, CA (United States)

    1994-12-31

    The Biconjugate Gradient (BCG) algorithm is the {open_quotes}natural{close_quotes} generalization of the classical Conjugate Gradient method to nonsymmetric linear systems. It is an attractive method because of its simplicity and its good convergence properties. Unfortunately, BCG suffers from two kinds of breakdowns (divisions by 0): one due to the non-existence of the residual polynomial, and the other due to a breakdown in the recurrence relationship used. There are many look-ahead techniques in existence which are designed to handle these breakdowns. Although the step size needed to overcome an exact breakdown can be computed in principle, these methods can unfortunately be quite complicated for handling near breakdowns since the sizes of the look-ahead steps are variable (indeed, the breakdowns can be incurable). Recently, Bank and Chan introduced the Composite Step Biconjugate Gradient (CSBCG) algorithm, an alternative which cures only the first of the two breakdowns mentioned by skipping over steps for which the BCG iterate is not defined. This is done with a simple modification of BCG which needs only a maximum look-ahead step size of 2 to eliminate the (near) breakdown and to smooth the sometimes erratic convergence of BCG. Thus, instead of a more complicated (but less prone to breakdown) version, CSBCG cures only one kind of breakdown, but does so with a minimal modification to the usual implementation of BCG in the hope that its empirically observed stability will be inherited. The authors note, then, that the Composite Step idea can be incorporated anywhere the BCG polynomial is used; in particular, in product methods such as CGS, Bi-CGSTAB, and TFQMR. Doing this not only cures the breakdown mentioned above, but also takes on the advantages of these product methods, namely, no multiplications by the transpose matrix and a faster convergence rate than BCG.

  2. Investigating the Composite Step Biconjugate A-Orthogonal Residual Method for Non-Hermitian Dense Linear Systems in Electromagnetics

    NARCIS (Netherlands)

    Jing, Yan-Fei; Huang, Ting-Zhu; Carpentieri, Bruno; Duan, Yong

    An interesting stabilizing variant of the biconjugate A-orthogonal residual (BiCOR) method is investigated for solving dense complex non-Hermitian systems of linear equations arising from the Galerlcin discretization of surface integral equations in electromagnetics. The novel variant is naturally

  3. Reliability Analysis for Adhesive Bonded Composite Stepped Lap Joints Loaded in Fatigue

    DEFF Research Database (Denmark)

    Kimiaeifar, Amin; Sørensen, John Dalsgaard; Lund, Erik

    2012-01-01

    This paper describes a probabilistic approach to calculate the reliability of adhesive bonded composite stepped lap joints loaded in fatigue using three- dimensional finite element analysis (FEA). A method for progressive damage modelling is used to assess fatigue damage accumulation and residual...... by the wind turbine standard IEC 61400-1. Finally, an approach for the assessment of the reliability of adhesive bonded composite stepped lap joints loaded in fatigue is presented. The introduced methodology can be applied in the same way to calculate the reliability level of wind turbine blade components...

  4. production methods and

    African Journals Online (AJOL)

    2003-03-01

    Mar 1, 2003 ... Production Methods and Composition of Bushera: a Ugandan Traditional Fermented Cereal Bererage. Peer Reviewed. M uyan ja ... ingredients, the fermentation process and the uses of. Bushera are presented. ... of germinated sorghum flour to three quarters of water. (v/v), mixing thoroughly and then ...

  5. Production Methods for Hyaluronan

    Directory of Open Access Journals (Sweden)

    Carmen G. Boeriu

    2013-01-01

    Full Text Available Hyaluronan is a polysaccharide with multiple functions in the human body being involved in creating flexible and protective layers in tissues and in many signalling pathways during embryonic development, wound healing, inflammation, and cancer. Hyaluronan is an important component of active pharmaceutical ingredients for treatment of, for example, arthritis and osteoarthritis, and its commercial value far exceeds that of other microbial extracellular polysaccharides. Traditionally hyaluronan is extracted from animal waste which is a well-established process now. However, biotechnological synthesis of biopolymers provides a wealth of new possibilities. Therefore, genetic/metabolic engineering has been applied in the area of tailor-made hyaluronan synthesis. Another approach is the controlled artificial (in vitro synthesis of hyaluronan by enzymes. Advantage of using microbial and enzymatic synthesis for hyaluronan production is the simpler downstream processing and a reduced risk of viral contamination. In this paper an overview of the different methods used to produce hyaluronan is presented. Emphasis is on the advancements made in the field of the synthesis of bioengineered hyaluronan.

  6. High Yielding Microbubble Production Method

    Directory of Open Access Journals (Sweden)

    Joe Fiabane

    2016-01-01

    Full Text Available Microfluidic approaches to microbubble production are generally disadvantaged by low yield and high susceptibility to (microchannel blockages. This paper presents an alternative method of producing microbubbles of 2.6 μm mean diameter at concentrations in excess of 30 × 106 mL−1. In this method, the nitrogen gas flowing inside the liquid jet is disintegrated into spray of microbubble when air surrounding this coflowing nitrogen gas-liquid jet passes through a 100 μm orifice at high velocity. Resulting microbubble foam has the polydispersity index of 16%. Moreover, a ratio of mean microbubble diameter to channel width ratio was found to be less than 0.025, which substantially alleviates the occurrence of blockages during production.

  7. Method for alignment of product and production concepts

    DEFF Research Database (Denmark)

    Pedersen, Rasmus; Kvist, Morten; Mortensen, Niels Henrik

    2005-01-01

    The right use of modular product architectures can help companies provide a great variety of customized products at a competitive price level, by reuse of knowledge, components, processes and utilization of economies of scale in many of the activities that are necessary to provide products...... and the production system upon which manufacturing will take place. This fit is referred to as alignment. The aim of this paper is to present a new design method that can help design aligned modular product and production architectures. The method has been applied and evaluated at the Danish company Danfoss...... Industrial Controls. The method consists of two tools and a guideline on how to use these tools....

  8. Methanol production method and system

    Science.gov (United States)

    Chen, Michael J.; Rathke, Jerome W.

    1984-01-01

    Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.

  9. Extending product modeling methods for integrated product development

    DEFF Research Database (Denmark)

    Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

    2013-01-01

    . Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM......Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...

  10. MODERN METHODS OF REASONABLE PRODUCT SUPPLY

    Directory of Open Access Journals (Sweden)

    Anna Kulik

    2016-11-01

    Full Text Available Thesis objective is to study modern methods of product supply with the purpose to determine optimal ways for their rationalization. Since the use of reasonable practices, taking into account external and internal factors under the specific conditions of product moving from the supplier to the buyer, makes the process of product supply economically viable, i.e., low costs for product transportation, ensures fast moving products, their safety and, ultimately, results in reduction of the costs of product disposal. Methodology. The study is based on theoretical methods to study this problem. System analysis method and simulation of the ways to improve were also used in the study. Results. Addressing these issues, the concept, form and stages of product supply process organization depending on the type of product have been studied; product supply management methods based on logistics concept of “demand response”. Practical significance. Optimization of the principles and methods of product supply, factors affecting its organization will, in practice, contribute to the development of reasonable product delivery systems featured with economic efficiency of advanced technologies of product supply. Value/ originality. The analyzed methods of product supply management based on logistics concept of “demand response” can ensure maximum reduction of response time to the changes in demand by rapid stocktaking at those points of the market where the demand is expected to increase, which will allow to reduce the costs of bringing the product to the consumer.

  11. Determination production costs using PBC method

    Directory of Open Access Journals (Sweden)

    Todić Vladimir V.

    2014-01-01

    Full Text Available Basic characteristics of modern markets make requirements in quality increasing, decreasing prices and shortening delivery of products. In the middle of this requirements are production costs for whose determination are developed many traditional and alternative methods including PBC method (Process Based Costing. This method enables precisely locating and calculating indirect production costs, and with determined direct costs enables determination of total production costs. This paper shows usage of PBC method for determination production costs for three forms of processing cutting tools.

  12. XML-based product information processing method for product design

    Science.gov (United States)

    Zhang, Zhen Yu

    2012-01-01

    Design knowledge of modern mechatronics product is based on information processing as the center of the knowledge-intensive engineering, thus product design innovation is essentially the knowledge and information processing innovation. Analysis of the role of mechatronics product design knowledge and information management features, a unified model of XML-based product information processing method is proposed. Information processing model of product design includes functional knowledge, structural knowledge and their relationships. For the expression of product function element, product structure element, product mapping relationship between function and structure based on the XML model are proposed. The information processing of a parallel friction roller is given as an example, which demonstrates that this method is obviously helpful for knowledge-based design system and product innovation.

  13. Method for creating and visualizing product architectures

    DEFF Research Database (Denmark)

    Kvist, Morten; Pedersen, Rasmus; Mortensen, Niels Henrik

    2005-01-01

    presents a new method for synthesis and visualization of product architecture concepts. The visualization represents the concept from a market, product assortment and production/supply chain point of view in order to support the complex process of making the right decisions. The work is based....... The second is that several products can be developed from the same basis so that the company can base product families on the same basic set of design principles and technologies. The third is that modularization may support an alignment of market, product and production/supply chain aspects. This paper...... on the assumption that a graphical overview of a given solution space and relations between market demands, product architecture and manufacturing layout can support decision-making and constitute a very powerful interaction between stakeholders in product development. The key feature of the method is two jigsaw...

  14. Advances in product family and product platform design methods & applications

    CERN Document Server

    Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

    2014-01-01

    Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

  15. Methods and materials for production of terpenoids

    DEFF Research Database (Denmark)

    2015-01-01

    The invention provide novel methods for production of terpenoids. The methods take advantage of combinations of enzymes, which are not present in nature. Thus the methods involves use of host organisms expressing a diTPS of class II, diTPS of class I, and one or more CYPs.......The invention provide novel methods for production of terpenoids. The methods take advantage of combinations of enzymes, which are not present in nature. Thus the methods involves use of host organisms expressing a diTPS of class II, diTPS of class I, and one or more CYPs....

  16. Stabilizer bars: Part 3. Production methods

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2011-01-01

    Full Text Available The article outlines the methods of stabilizer bar production as well as selected issues concerning the theory of cold roll forming. A proper construction and the selection of parameters are fundamental factors influencing the selection of a suitable production process. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  17. Method for anaerobic fermentation and biogas production

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention relates to a method for biomass processing, anaerobic fermentation of the processed biomass, and the production biogas. In particular, the invention relates to a system and method for generating biogas from anaerobic fermentation of processed organic material that comprises...

  18. Methods for high yield production of terpenes

    Energy Technology Data Exchange (ETDEWEB)

    Kutchan, Toni; Higashi, Yasuhiro; Feng, Xiaohong

    2017-01-03

    Provided are enhanced high yield production systems for producing terpenes in plants via the expression of fusion proteins comprising various combinations of geranyl diphosphate synthase large and small subunits and limonene synthases. Also provided are engineered oilseed plants that accumulate monoterpene and sesquiterpene hydrocarbons in their seeds, as well as methods for producing such plants, providing a system for rapidly engineering oilseed crop production platforms for terpene-based biofuels.

  19. Microorganism Reduction Methods in Meat Products

    OpenAIRE

    ZÁHOROVÁ, Jana

    2011-01-01

    In Bachelor thesis I deal with a theme of the influences on the reduction of microorganisms of meat products. First, I focused on the characteristics of individual organisms, the factors affecting their growth, incidence of microorganisms in meat, forms of microbial degradation and contamination of meat microorganisms in slaughterhouses. The next section deals with the means to fight against microorganisms and methods which can reduce their presence in meat products. In the end there is menti...

  20. Volvo LCP: New materials, production methods

    Science.gov (United States)

    Bergmark, U.

    1984-01-01

    The materials and production methods developed for the prototype Light Component Project are described. The forecasting of auto industry technology as it effects engine and structural design, vehicle construction materials, and vehicle assembly is included with particular emphasis on computer aided manufacture and robotics used on an engine assembly line.

  1. Electrochromic devices and related products and methods

    Energy Technology Data Exchange (ETDEWEB)

    Snow, Timothy; McFadden, Judith; Tenent, Robert

    2018-01-30

    An electrochromic device may be switchable between a transparent state and at least one reflective state. A lithium-containing reflective feature may form when the electrochromic device is switched from the transparent state to the reflective state. Various products and methods may involve the electrochromic device.

  2. Catalyst and method for production of methylamines

    Science.gov (United States)

    Klier, Kamil; Herman, Richard G.; Vedage, Gamini A.

    1987-01-01

    This invention relates to an improved catalyst and method for the selective production of methylamines. More particularly, it is concerned with the preparation of stable highly active catalysts for producing methylamines by a catalytic reaction of ammonia or substituted amines and binary synthesis gas (CO+H.sub.2).

  3. Analysis Method for Integrating Components of Product

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jun Ho [Inzest Co. Ltd, Seoul (Korea, Republic of); Lee, Kun Sang [Kookmin Univ., Seoul (Korea, Republic of)

    2017-04-15

    This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

  4. Method for the continuous production of hydrogen

    Science.gov (United States)

    Getty, John Paul; Orr, Mark T.; Woodward, Jonathan

    2002-01-01

    The present invention is a method for the continuous production of hydrogen. The present method comprises reacting a metal catalyst with a degassed aqueous organic acid solution within a reaction vessel under anaerobic conditions at a constant temperature of .ltoreq.80.degree. C. and at a pH ranging from about 4 to about 9. The reaction forms a metal oxide when the metal catalyst reacts with the water component of the organic acid solution while generating hydrogen, then the organic acid solution reduces the metal oxide thereby regenerating the metal catalyst and producing water, thus permitting the oxidation and reduction to reoccur in a continual reaction cycle. The present method also allows the continuous production of hydrogen to be sustained by feeding the reaction with a continuous supply of degassed aqueous organic acid solution.

  5. Chemical Methods for Peptide and Protein Production

    Directory of Open Access Journals (Sweden)

    Istvan Toth

    2013-04-01

    Full Text Available Since the invention of solid phase synthetic methods by Merrifield in 1963, the number of research groups focusing on peptide synthesis has grown exponentially. However, the original step-by-step synthesis had limitations: the purity of the final product decreased with the number of coupling steps. After the development of Boc and Fmoc protecting groups, novel amino acid protecting groups and new techniques were introduced to provide high quality and quantity peptide products. Fragment condensation was a popular method for peptide production in the 1980s, but unfortunately the rate of racemization and reaction difficulties proved less than ideal. Kent and co-workers revolutionized peptide coupling by introducing the chemoselective reaction of unprotected peptides, called native chemical ligation. Subsequently, research has focused on the development of novel ligating techniques including the famous click reaction, ligation of peptide hydrazides, and the recently reported a-ketoacid-hydroxylamine ligations with 5-oxaproline. Several companies have been formed all over the world to prepare high quality Good Manufacturing Practice peptide products on a multi-kilogram scale. This review describes the advances in peptide chemistry including the variety of synthetic peptide methods currently available and the broad application of peptides in medicinal chemistry.

  6. Reactor and method for production of nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Sunkara, Mahendra Kumar; Kim, Jeong H.; Kumar, Vivekanand

    2017-04-25

    A reactor and method for production of nanostructures, including metal oxide nanowires or nanoparticles, are provided. The reactor includes a regulated metal powder delivery system in communication with a dielectric tube; a plasma-forming gas inlet, whereby a plasma-forming gas is delivered substantially longitudinally into the dielectric tube; a sheath gas inlet, whereby a sheath gas is delivered into the dielectric tube; and a microwave energy generator coupled to the dielectric tube, whereby microwave energy is delivered into a plasma-forming gas. The method for producing nanostructures includes providing a reactor to form nanostructures and collecting the formed nanostructures, optionally from a filter located downstream of the dielectric tube.

  7. Novel Method of Production Decline Analysis

    Science.gov (United States)

    Xie, Shan; Lan, Yifei; He, Lei; Jiao, Yang; Wu, Yong

    2018-02-01

    ARPS decline curves is the most commonly used in oil and gas field due to its minimal data requirements and ease application. And prediction of production decline which is based on ARPS analysis rely on known decline type. However, when coefficient index are very approximate under different decline type, it is difficult to directly recognize decline trend of matched curves. Due to difficulties above, based on simulation results of multi-factor response experiments, a new dynamic decline prediction model is introduced with using multiple linear regression of influence factors. First of all, according to study of effect factors of production decline, interaction experimental schemes are designed. Based on simulated results, annual decline rate is predicted by decline model. Moreover, the new method is applied in A gas filed of Ordos Basin as example to illustrate reliability. The result commit that the new model can directly predict decline tendency without needing recognize decline style. From arithmetic aspect, it also take advantage of high veracity. Finally, the new method improves the evaluation method of gas well production decline in low permeability gas reservoir, which also provides technical support for further understanding of tight gas field development laws.

  8. New Method of Solar Grade Silicon Production

    Energy Technology Data Exchange (ETDEWEB)

    Zadde, V. V.; Pinov, A. B.; Strebkov, D. S.; Belov, E. P.; Efimov, N. K.; Lebedev, E. N.; Korobkov, E. I.; Blake, D.; Touryan, K.

    2002-08-01

    One of the main advantages of photovoltaic solar cells (PVC) is their ecological clarity of direct conversion of solar energy to electricity. For wide spreading of PV technologies it is necessary to ensure that there is no environment pollution at the stage of PVC-s manufacturing, beginning from producing of polysilicon feedstock. The objective of this project is creation of ecologically clean method for production of solar grade polysilicon feedstock (SGPF) as raw material for PVCs, and also raw material for producing monocrystalline silicon, which is used in electronic industry.

  9. Method for redesign of microbial production systems

    Science.gov (United States)

    Maranas, Costas D.; Burgard, Anthony P.; Pharkya, Priti

    2010-11-02

    A computer-assisted method for identifying functionalities to add to an organism-specific metabolic network to enable a desired biotransformation in a host includes accessing reactions from a universal database to provide stoichiometric balance, identifying at least one stoichiometrically balanced pathway at least partially based on the reactions and a substrate to minimize a number of non-native functionalities in the production host, and incorporating the at least one stoichiometrically balanced pathway into the host to provide the desired biotransformation. A representation of the metabolic network as modified can be stored.

  10. Device for nanoparticle production using plasma methods

    Directory of Open Access Journals (Sweden)

    Bica, Ion

    1999-04-01

    Full Text Available The paper presents a device for nanoparticle production using the method of vaporization of metals and/or the method of thermal decomposition of compounds of metals (oxides, carbonyls, halides, etc. in the plasma of transferred electric are or in plasma jet. The dimensions particles obtained are 3 to 100nm some possible applications.

    Este trabajo presenta un dispositivo destinado a la producción de nanopartículas utilizando métodos de vaporización de metales y/o el método de descomposición de compuestos metálicos (óxidos, carbonatos, halógenos en el plasma del arco transferido o en el chorro de plasma. Se presentan algunas posibles aplicaciones. Las dimensiones de las partículas obtenidas varían entre 3 y 100nm.

  11. Method for the enzymatic production of hydrogen

    Science.gov (United States)

    Woodward, J.; Mattingly, S.M.

    1999-08-24

    The present invention is an enzymatic method for producing hydrogen comprising the steps of: (a) forming a reaction mixture within a reaction vessel comprising a substrate capable of undergoing oxidation within a catabolic reaction, such as glucose, galactose, xylose, mannose, sucrose, lactose, cellulose, xylan and starch; the reaction mixture also comprising an amount of glucose dehydrogenase in an amount sufficient to catalyze the oxidation of the substrate, an amount of hydrogenase sufficient to catalyze an electron-requiring reaction wherein a stoichiometric yield of hydrogen is produced, an amount of pH buffer in an amount sufficient to provide an environment that allows the hydrogenase and the glucose dehydrogenase to retain sufficient activity for the production of hydrogen to occur and also comprising an amount of nicotinamide adenine dinucleotide phosphate sufficient to transfer electrons from the catabolic reaction to the electron-requiring reaction; (b) heating the reaction mixture at a temperature sufficient for glucose dehydrogenase and the hydrogenase to retain sufficient activity and sufficient for the production of hydrogen to occur, and heating for a period of time that continues until the hydrogen is no longer produced by the reaction mixture, wherein the catabolic reaction and the electron-requiring reactions have rates of reaction dependent upon the temperature; and (c) detecting the hydrogen produced from the reaction mixture. 8 figs.

  12. A modified ABC model in InGaN MQW LED using compositionally step graded Alternating Barrier for efficiency improvement

    Science.gov (United States)

    Prajoon, P.; Nirmal, D.; Anuja Menokey, M.; Charles Pravin, J.

    2016-08-01

    In this paper, Multiple Quantum Well (MQW) Light-Emitting Diodes (LEDs) with compositionally step graded (CSG) Alternating Barriers (AB) of InGaN-AlGaN with p-doped GaN barrier is designed and analysed. The improved crystal structure and modified band bending in the device enhances the carrier confinement and diminishes the polarization-related efficiency reduction. Furthermore, the good crystalline quality increases the hole injection and transportation; this significantly improves the radiative recombination rate and reduces the non-radiative recombination as well as carrier leakage out of the active region. Simulation result show mitigated efficiency droop of 3% and light output power of 1500 mW at the injection current of 500 mA. A modified ABC model is also developed to model the carrier leakage mechanism at high injection current density. In the model, total carrier leakage currents from the active region due to thermionic emission and electron overflow at high injection current are considered. Also, the obtained result of the modelled conventional LED shows a good fit with experimental data. Moreover, the SiC substrate technology in the design is attributed with improved crystal structure, reduced polarization effect and thermal conductivity, which improve the optical performance of the device.

  13. New Synthetic Methods for Hypericum Natural Products

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Insik [Iowa State Univ., Ames, IA (United States)

    2006-01-01

    Organic chemistry has served as a solid foundation for interdisciplinary research areas, such as molecular biology and medicinal chemistry. An understanding of the biological activities and structural elucidations of natural products can lead to the development of clinically valuable therapeutic options. The advancements of modern synthetic methodologies allow for more elaborate and concise natural product syntheses. The theme of this study centers on the synthesis of natural products with particularly challenging structures and interesting biological activities. The synthetic expertise developed here will be applicable to analog syntheses and to other research problems.

  14. Chemical Methods for the Production of Proteins

    Energy Technology Data Exchange (ETDEWEB)

    Kent, Stephen B.H.

    2008-09-15

    The goal of this research program was to develop improved methods for chemical peptide and protein synthesis, and to apply these methods to the total synthesis of small proteins (<80 amino acids) & integral membrane proteins.

  15. Method and system for ethanol production

    Science.gov (United States)

    Feder, H.M.; Chen, M.J.

    1981-09-24

    A transition metal carbonyl and a tertiary amine are employed as a homogeneous catalytic system in methanol or a less volatile solvent to react methanol with carbon monoxide and hydrogen gas producing ethanol and carbon dioxide. The gas contains a high carbon monoxide to hydrogen ratio as is present in a typical gasifier product. The reaction has potential for anhydrous ethanol production as carbon dioxide rather than water is produced. Selected transition metal carbonyls include those of iron, rhodium, ruthenium, manganese in combination with iron and possibly osmium. Selected amines include trimethylamine, N-Methylpyrrolidine, 2,4-diazabicyclooctane, dimethylneopentylamine, N-methylpiperidine and derivatives of N-methylpiperidine.

  16. Method and apparatus for furfural production

    NARCIS (Netherlands)

    Marcotullio, G.; De Jong, W.

    2015-01-01

    The invention concerns a process for the production of furfural from pentoses and/or water soluble pentosans, comprising the steps of feeding an aqueous pentose solution containing one or more pentoses or soluble pentosans to the bottom of a reaction column to produce an aqueous liquid upflow;

  17. Methods for Stem Cell Production and Therapy

    Science.gov (United States)

    Claudio, Pier Paolo (Inventor); Valluri, Jagan V. (Inventor)

    2015-01-01

    The present invention relates to methods for rapidly expanding a stem cell population with or without culture supplements in simulated microgravity conditions. The present invention relates to methods for rapidly increasing the life span of stem cell populations without culture supplements in simulated microgravity conditions. The present invention also relates to methods for increasing the sensitivity of cancer stem cells to chemotherapeutic agents by culturing the cancer stem cells under microgravity conditions and in the presence of omega-3 fatty acids. The methods of the present invention can also be used to proliferate cancer cells by culturing them in the presence of omega-3 fatty acids. The present invention also relates to methods for testing the sensitivity of cancer cells and cancer stem cells to chemotherapeutic agents by culturing the cancer cells and cancer stem cells under microgravity conditions. The methods of the present invention can also be used to produce tissue for use in transplantation by culturing stem cells or cancer stem cells under microgravity conditions. The methods of the present invention can also be used to produce cellular factors and growth factors by culturing stem cells or cancer stem cells under microgravity conditions. The methods of the present invention can also be used to produce cellular factors and growth factors to promote differentiation of cancer stem cells under microgravity conditions.

  18. Steel mill products analysis using qualities methods

    Directory of Open Access Journals (Sweden)

    B. Gajdzik

    2016-10-01

    Full Text Available The article presents the subject matter of steel mill product analysis using quality tools. The subject of quality control were bolts and a ball bushing. The Pareto chart and fault mode and effect analysis (FMEA were used to assess faultiness of the products. The faultiness analysis in case of the bolt enabled us to detect the following defects: failure to keep the dimensional tolerance, dents and imprints, improper roughness, lack of pre-machining, non-compatibility of the electroplating and faults on the surface. Analysis of the ball bushing has also revealed defects such as: failure to keep the dimensional tolerance, dents and imprints, improper surface roughness, lack of surface premachining as well as sharp edges and splitting of the material.

  19. Methods and systems for chemoautotrophic production of organic compounds

    Science.gov (United States)

    Fischer, Curt R.; Che, Austin J.; Shetty, Reshma P.; Kelly, Jason R.

    2013-01-08

    The present disclosure identifies pathways, mechanisms, systems and methods to confer chemoautotrophic production of carbon-based products of interest, such as sugars, alcohols, chemicals, amino acids, polymers, fatty acids and their derivatives, hydrocarbons, isoprenoids, and intermediates thereof, in organisms such that these organisms efficiently convert inorganic carbon to organic carbon-based products of interest using inorganic energy, such as formate, and in particular the use of organisms for the commercial production of various carbon-based products of interest.

  20. Methods and systems for chemoautotrophic production of organic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Curt R.; Che, Austin J.; Shetty, Reshma P.; Kelly, Jason R.

    2018-02-27

    The present disclosure identifies pathways, mechanisms, systems and methods to confer chemoautotrophic production of carbon-based products of interest, such as sugars, alcohols, chemicals, amino acids, polymers, fatty acids and their derivatives, hydrocarbons, isoprenoids, and intermediates thereof, in organisms such that these organisms efficiently convert inorganic carbon to organic carbon-based products of interest using inorganic energy, such as formate, and in particular the use of organisms for the commercial production of various carbon-based products of interest.

  1. Biochar production method and composition therefrom

    Science.gov (United States)

    Lee, James W.; Buchanan, III, Archibald C.; Evans, Barbara R.; Kidder, Michelle K.

    2013-03-19

    The invention is directed to a method for producing an oxygenated biochar material possessing a cation-exchanging property, wherein a biochar source is reacted with one or more oxygenating compounds in such a manner that the biochar source homogeneously acquires oxygen-containing cation-exchanging groups in an incomplete combustion process. The invention is also directed to oxygenated biochar compositions and soil formulations containing the oxygenated biochar material.

  2. Method of production of ammonia synthesis gas

    Energy Technology Data Exchange (ETDEWEB)

    1943-09-10

    In the catalytic synthesis of complicated hydrocarbons from carbon monoxide and hydrogen at normal or slightly increased pressures by the Fischer--Tropsch process, or carried out at higher pressures in some other proposals, the synthesis gas was incompletely transformed. After the conclusion of the synthesis, the residual gas, upon the separation of the liquid constituents, contained, in addition to the unreacted carbon moxoxide and hydrogen, also considerable amounts of methane, carbon dioxide, and nitrogen from the original synthesis gas. This residual gas had been used as fuel. It was, however, pure and contained no sulfur or other catalyst poisons and burning it was considered uneconomical. It was proposed to make better use of it by using it as fuel. It was, however, pure and contained no sulfur or other catalyst poisons and burning it was considered uneconomical. It was proposed to make better use of it by using it as a raw material for the production of synthesis gas by decomposing the methane present in it with steam according to the equation CH/sub 4/ + H/sub 2/O = CO + 3H/sub 2/. This conversion was to be brought about either by a return to the producers or else in special splitting units. Also, it had been found that the residual gas, possibly even in the presence of oxygen compounds, could be conveniently used for the synthesis of ammonia. Several examples of ammonia synthesis were discussed.

  3. Determination of impurities and degradation products from veterinary medicinal products by HPLC method

    Directory of Open Access Journals (Sweden)

    Elena Gabriela Oltean

    2014-06-01

    Full Text Available The organic or inorganic impurities in the veterinary medicinal product can derive from starting materials, manufacturing process, incomplete purification, inappropriate storage. The acceptable levels of impurities in pharmaceuticals are estimated by comparison with standard solutions, according to the appropriate monographs. Forced degradation studies determine the stability of the method of dosage for the active compounds and for the entire finished product under excessive accelerated degradation conditions. They also provide information on degradation pathways and selectivity of analytical methods applied. The information provided by the degradation studies on the active compound and finished pharmaceutical product should demonstrate the specificity of the analytical method regarding impurities. Forced degradation studies should demonstrate that the impurities and degradation products generated do not interfere with the active compound. The current forced degradation methods consist of acid hydrolysis, basic hydrolysis, oxidation, exposure of the medicinal product to temperature and light. HPLC methods are an integral analytical instrument for the analysis of the medicinal product. The HPLC method should be able to separate, detect and quantify various specific degradation products that can appear after manufacture or storage of the medicinal product, as well as new elements appearing after synthesis. FDA and ICH guidelines recommend the enclosure of the results, including the chromatograms specific to the forced degradation-subjected medicinal product, in the documentation for marketing authorization. Using HPLC methods in forced degradation studies on medicinal products provides relevant information on the method of determination for the formulation of the medicinal product, synthesis product, packaging methods and storage.

  4. Method for extracting protein from a fermentation product

    Science.gov (United States)

    Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

    2014-02-18

    A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

  5. Using non-parametric methods in econometric production analysis

    DEFF Research Database (Denmark)

    Czekaj, Tomasz Gerard; Henningsen, Arne

    2012-01-01

    Econometric estimation of production functions is one of the most common methods in applied economic production analysis. These studies usually apply parametric estimation techniques, which obligate the researcher to specify a functional form of the production function of which the Cobb-Douglas a......Econometric estimation of production functions is one of the most common methods in applied economic production analysis. These studies usually apply parametric estimation techniques, which obligate the researcher to specify a functional form of the production function of which the Cobb...... parameter estimates, but also in biased measures which are derived from the parameters, such as elasticities. Therefore, we propose to use non-parametric econometric methods. First, these can be applied to verify the functional form used in parametric production analysis. Second, they can be directly used...

  6. Symmetrization of the Berezin Star Product and Multiple Star Product Method

    OpenAIRE

    Wakatsuki, Kazunori

    2000-01-01

    We construct a multiple star product method and by using this method, show that integral forms of some star products can be written in terms of the path-integral. This method can be applied to some examples. Especially, the associativity of the skew-symmetrized Berezin star product proposed in \\cite{SW}, is recovered in large $N$ limit of the multiple star product. We also derive the path integral form of the Kontsevich star product from the multiple Moyal star product. This paper includes so...

  7. IMPROVEMENT OF QUALITY IN PRODUCTION PROCESS BY APPLYING KAIKAKU METHOD

    Directory of Open Access Journals (Sweden)

    Milan Radenkovic

    2013-12-01

    Full Text Available In this paper, Kaikaku method is presented. The essence of this method is introduction, principles and ways of implementation in the real systems. The main point how Kaikaku method influences on quality. It is presented on the practical example (furniture industry, one way how to implement Kaikaku method and how influence on quality improvement of production process.

  8. Methods for production of aluminium powders and their application fields

    Energy Technology Data Exchange (ETDEWEB)

    Gopienko, V.G.; Kiselev, V.P.; Zobnina, N.S. (Vsesoyuznyj Nauchno-Issledovatel' skij i Proektnyj Inst. Alyuminievoj, magnievoj i ehlektrodnoj promyshlennosti (USSR))

    1984-12-01

    Different types of powder products made of alluminium and its alloys (powder, fine powders, granules and pastes) as well as their basic physicochemical properties are briefly characterized. The principle methods for alluminium powder production are outlined: physicochemical methods, the melt spraying by compressed gas being the mostly developed among them, and physico-mechanical ones. Main application spheres for powder productions of aluminium and its alloys are reported in short.

  9. Method for an energy-oriented production control

    OpenAIRE

    Schultz, C.; Braunreuther, S.; Reinhart, G.

    2016-01-01

    Increasing energy costs as well as a growing awareness for sustainability are challenging companies to use energy more efficiently. Therefore, a company's production planning and control strategies have to be adapted. This paper presents a method for a short-term production control which aims to synchronize the energy demand in manufacturing with a limited energy supply. The method treats electric energy as a limited production capacity where load profiles for manufacturing are predetermined ...

  10. Using non-parametric methods in econometric production analysis

    DEFF Research Database (Denmark)

    Czekaj, Tomasz Gerard; Henningsen, Arne

    Econometric estimation of production functions is one of the most common methods in applied economic production analysis. These studies usually apply parametric estimation techniques, which obligate the researcher to specify the functional form of the production function. Most often, the Cobb...... results—including measures that are of interest of applied economists, such as elasticities. Therefore, we propose to use nonparametric econometric methods. First, they can be applied to verify the functional form used in parametric estimations of production functions. Second, they can be directly used...

  11. RAISE: a Product Supporting Industrial Use of Formal Methods

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Pedersen, J. Storbank; Prehn, Søren

    1993-01-01

    This paper gives an overview of RAISE, a product consisting of a method for developing software, an associated formal specification language and tools supporting the method and the language. The method is based on the notion of stepwise refinement and offers the possibility of formal verification...

  12. CONTACTLESS METHODS FOR QUALITY EVALUATION OF DAIRY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Zlatin Zlatev

    2016-07-01

    Full Text Available The aim of the report is to present a comparative analysis of the methods and technical means for assessment of the quality and safety of dairy products, particularly yellow cheese by spectral characteristics. As a result of the analysis are established appropriate methods for representation of the spectral characteristics and classification of the researched product. In the development are shown and evaluated the accuracy and performance of the results of studies conducted in the laboratory of the Trakia University, faculty of Technics and technologies with the discussed methods for evaluation the quality of the food product.

  13. Advanced Productivity Analysis Methods for Air Traffic Control Operations.

    Science.gov (United States)

    1976-12-01

    This report gives a description of the Air Traffic Control (ATC) productivity analysis methods developed, implemented, and refined by the Stanford Research Institute (SRI) under the sponsorship of FAA and TSC. Two models are included in the productiv...

  14. Methods Used for Teaching Psychomotor Skills in Crop Production.

    Science.gov (United States)

    Osborne, Edward W.

    1988-01-01

    The purpose of this study was to determine the degree of psychomotor skill instruction in crop production provided by agricultural production teachers in Illinois and the methods used for this teaching. Responses from 79 of 100 teachers indicated that most do not have students observe or practice a procedure for skill improvement. More experienced…

  15. Methods for suppressing isomerization of olefin metathesis products

    Energy Technology Data Exchange (ETDEWEB)

    Firth, Bruce E.; Kirk, Sharon E.

    2015-10-27

    A method for suppressing isomerization of an olefin metathesis product produced in a metathesis reaction includes adding an isomerization suppression agent that includes nitric acid to a mixture that includes the olefin metathesis product and residual metathesis catalyst from the metathesis reaction under conditions that are sufficient to passivate at least a portion of the residual metathesis catalyst. Methods of refining a natural oil are described.

  16. Methods for suppressing isomerization of olefin metathesis products

    Energy Technology Data Exchange (ETDEWEB)

    Firth, Bruce E.; Kirk, Sharon E.; Gavaskar, Vasudeo S.

    2015-09-22

    A method for suppressing isomerization of an olefin metathesis product produced in a metathesis reaction includes adding an isomerization suppression agent to a mixture that includes the olefin metathesis product and residual metathesis catalyst from the metathesis reaction under conditions that are sufficient to passivate at least a portion of the residual metathesis catalyst. The isomerization suppression agent is phosphorous acid, a phosphorous acid ester, phosphinic acid, a phosphinic acid ester or combinations thereof. Methods of refining natural oils are described.

  17. Method for the production of a fermentation product from an organism

    NARCIS (Netherlands)

    Van Hee, P.; Van der Wielen, L.A.M.; Van der Lans, R.G.J.M.

    2005-01-01

    The invention relates to a method for the production of a fermentation product from an organism cultured in a culture medium, wherein the organism after the formation of the fermentation product is subjected to a lysis treatment in the presence of a lysis-promoting compound. In accordance with the

  18. Methods for high volume production of nanostructured materials

    Science.gov (United States)

    Ripley, Edward B [Knoxville, TN; Morrell, Jonathan S [Knoxville, TN; Seals, Roland D [Oak Ridge, TN; Ludtka, Gerald M [Oak Ridge, TN

    2011-03-22

    A system and method for high volume production of nanoparticles, nanotubes, and items incorporating nanoparticles and nanotubes. Microwave, radio frequency, or infrared energy vaporizes a metal catalyst which, as it condenses, is contacted by carbon or other elements such as silicon, germanium, or boron to form agglomerates. The agglomerates may be annealed to accelerate the production of nanotubes. Magnetic or electric fields may be used to align the nanotubes during their production. The nanotubes may be separated from the production byproducts in aligned or non-aligned configurations. The agglomerates may be formed directly into tools, optionally in compositions that incorporate other materials such as abrasives, binders, carbon-carbon composites, and cermets.

  19. IMPLEMENTATION OF CONTROL CARDS AND SUPPORTING METHOD IN PRODUCTION ENGINEERING

    Directory of Open Access Journals (Sweden)

    Anna WOLNOWSKA

    2012-10-01

    Full Text Available In the article there were presented chosen method associated with statistical control of production processes. Mainly focused on control cards and Pareto‐Lorenz analysis. Showed method were implemented to analysis production process stability of hearing aids in X company (the brand name don’t give because date of production is secret. Researches were made few months after new assembly lines starts‐up. Main aim of researches was defects types identification occurred in production process and determine the scale of effect. Finally received results were satisfactory, i.e. despite of occurred errors, control cards analysis showed that production process of BTE‐type (Behind‐The‐Ear hearing aids was stable.

  20. Gradient-based methods for production optimization of oil reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Suwartadi, Eka

    2012-07-01

    Production optimization for water flooding in the secondary phase of oil recovery is the main topic in this thesis. The emphasis has been on numerical optimization algorithms, tested on case examples using simple hypothetical oil reservoirs. Gradientbased optimization, which utilizes adjoint-based gradient computation, is used to solve the optimization problems. The first contribution of this thesis is to address output constraint problems. These kinds of constraints are natural in production optimization. Limiting total water production and water cut at producer wells are examples of such constraints. To maintain the feasibility of an optimization solution, a Lagrangian barrier method is proposed to handle the output constraints. This method incorporates the output constraints into the objective function, thus avoiding additional computations for the constraints gradient (Jacobian) which may be detrimental to the efficiency of the adjoint method. The second contribution is the study of the use of second-order adjoint-gradient information for production optimization. In order to speedup convergence rate in the optimization, one usually uses quasi-Newton approaches such as BFGS and SR1 methods. These methods compute an approximation of the inverse of the Hessian matrix given the first-order gradient from the adjoint method. The methods may not give significant speedup if the Hessian is ill-conditioned. We have developed and implemented the Hessian matrix computation using the adjoint method. Due to high computational cost of the Newton method itself, we instead compute the Hessian-timesvector product which is used in a conjugate gradient algorithm. Finally, the last contribution of this thesis is on surrogate optimization for water flooding in the presence of the output constraints. Two kinds of model order reduction techniques are applied to build surrogate models. These are proper orthogonal decomposition (POD) and the discrete empirical interpolation method (DEIM

  1. Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

    Directory of Open Access Journals (Sweden)

    Yan-Yan Wang

    2011-09-01

    Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

  2. Methods and systems for the production of hydrogen

    Science.gov (United States)

    Oh, Chang H [Idaho Falls, ID; Kim, Eung S [Ammon, ID; Sherman, Steven R [Augusta, GA

    2012-03-13

    Methods and systems are disclosed for the production of hydrogen and the use of high-temperature heat sources in energy conversion. In one embodiment, a primary loop may include a nuclear reactor utilizing a molten salt or helium as a coolant. The nuclear reactor may provide heat energy to a power generation loop for production of electrical energy. For example, a supercritical carbon dioxide fluid may be heated by the nuclear reactor via the molten salt and then expanded in a turbine to drive a generator. An intermediate heat exchange loop may also be thermally coupled with the primary loop and provide heat energy to one or more hydrogen production facilities. A portion of the hydrogen produced by the hydrogen production facility may be diverted to a combustor to elevate the temperature of water being split into hydrogen and oxygen by the hydrogen production facility.

  3. Scheduling Method for MTS/MTO Production System

    Science.gov (United States)

    Tadeuz; Maruf, A.

    2016-02-01

    In order to fulfil the demand from customers, company can carry out its production activities using several policies. There are two policies which are commonly used, Make-to- Stock (MTS) and Make-to-Order (MTO). Both of these policies not only can be implemented separately, but also can be combined on a production floor, for example in foundry which the production activities have a flowshop characteristic. This paper proposes a Base-Stock Control System (BSCS) model to classify each incoming orders into the category of MTS and MTO. Each incoming orders will be first classified into the category of High Volume (HV) and Low Volume (LV). All products in these two categories will be and scheduled using two alternative methods, the First-In-First-Out (FIFO) and Priority Rule (PR). The production activities are scheduled by considering the capacity of each work station and performed in batch using overlapping operations. Several scenarios conducted on the proposed method reveals production delay reduction from 36% to 5.3% and also the total amount of finished products in ten months horizon planning by approxi mately 66.6%.

  4. User Experience Evaluation Methods in Product Development (UXEM'09)

    Science.gov (United States)

    Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

    High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without

  5. Methods of cracking a crude product to produce additional crude products

    Science.gov (United States)

    Mo, Weijian [Sugar Land, TX; Roes, Augustinus Wilhelmus Maria [Houston, TX; Nair, Vijay [Katy, TX

    2009-09-08

    A method for producing a crude product is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce one or more crude products. At least one of the crude products has a boiling range distribution from 38.degree. C. and 343.degree. C. as determined by ASTM Method D5307. The crude product having the boiling range distribution from 38.degree. C. and 343.degree. C. is catalytically cracked to produce one or more additional crude products. At least one of the additional crude products is a second gas stream. The second gas stream has a boiling point of at most 38.degree. C. at 0.101 MPa.

  6. Comparison of Module Performance Characterization Methods for Energy Production

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Marion, W.; King, D.; Boyson, W.; Kratochvil, J.

    2000-12-04

    This report compares the two methods of determining the performance of PV modules. The methods translate module performance characterized in a laboratory to actual or reference conditions using slightly different approaches. The accuracy of both methods is compared for both hourly and daily energy production over a year of data recorded at NREL in Golden, CO. The comparison of the two methods will be presented for five different PV module technologies: multicrystalline silicon (mc-Si), dual-junction amorphous silicon (a-Si/a-Si:Ge), triple-junction amorphous silicon (a-Si/a-Si/a-Si:Ge), cadmium telluride (CdTe), and copper indium diselenide (CIGSS).

  7. Changeability of consumer preferences concerning the methods of fruit production

    Directory of Open Access Journals (Sweden)

    Eugenia Czernyszewicz

    2009-01-01

    Full Text Available The purpose of the paper was to establish and compare consumer preferences concerning the methods of fruit production (traditional or organic ones in the years 2001, 2003 and 2006 and the relations between the preferences and the socio-economic and demographic features of the consumers. The analysis was conducted on the basis of the data from surveys carried out among the inhabitants of Lublin. Results of those surveys point out that certain features of the consumers such as the sex, incomes and the family type significantly differentiated preferences concerning the method of fruit production. Increased incomes were connected with greater acceptance of the organic method, and their decrease was related to greater frequency of indicating the conventional method. Interest in the method of production, while buying the fruit was significantly higher among men than among women. Declaring the willingness to pay more for organic fruit was also correlated with the consumers’ sex. Besides, in 2006 it was not too strongly related to the incomes of the respondents. In the years 2001 and 2006 changeability of preferences con-cerning the willingness to pay a higher price for organic fruit and no change in the interest in the technology of fruit production while purchasing the fruit were shown.

  8. Maritime clusters productivity and competitiveness evaluation methods: Systematic approach

    Directory of Open Access Journals (Sweden)

    Viederytė Rasa

    2014-01-01

    Full Text Available Many scientists underline the importance of the clusters as agglomerated industries, working for the same purpose with joined resources and potential. This article analyses the basic assumptions which turn organizations to be clustered: the Productivity and the Competitiveness. For the evaluation of those assumptions in Maritime Clusters, many of the methods practically are applied without systematic approach - some are focused to the port efficiency, others provide quantity of resources growth dynamics, infrastructure parameters or even explain productivity and competitiveness as the same assumption. This article presents the analysis of Maritime Clusters' Productivity and Competitiveness evaluation methods in systematic approach, providing the analysis on the mostly-used variables and parameters of the evaluation the assumptions to be examined.

  9. The contemporary art of cost management methods during product development

    NARCIS (Netherlands)

    Wouters, M.; Morales, S.; Epstein, M.J.; Lee, J.Y.

    2014-01-01

    Purpose To provide an overview of research published in the management accounting literature on methods for cost management in new product development, such as a target costing, life cycle costing, component commonality, and modular design. Methodology/approach The structured literature search

  10. Production Methods and Composition of Bushera: A Ugandan ...

    African Journals Online (AJOL)

    A survey was conducted using a questionnaire to document the production methods of Bushera, a Ugandan traditional fermented cereal beverage, in the districts of Kabale and Rukungiri in the South Western region of Uganda. The chemical composition of raw materials and Bushera was determined using standard ...

  11. Facilities and methods for radioactive ion beam production

    CERN Document Server

    Blumenfeld, Y; Van Duppen, P

    2013-01-01

    Radioactive ion beam facilities are transforming nuclear science by making beams of exotic nuclei with various properties available for experiments. New infrastructures and development of existing installations enlarges the scientific scope continuously. An overview of the main production, separation and beam handling methods with focus on recent developments is done, as well as a survey of existing and forthcoming facilities world-wide.

  12. Host cells and methods for production of isobutanol

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, Larry Cameron; He, Hongxian; Huang, Lixuan Lisa; Okeefe, Daniel P.; Kruckeberg, Arthur Leo; Li, Yougen; Maggio-Hall, Lori Ann; McElvain, Jessica; Nelson, Mark J.; Patnaik, Ranjan; Rothman, Steven Cary

    2016-08-23

    Provided herein are recombinant yeast host cells and methods for their use for production of isobutanol. Yeast host cells provided comprise an isobutanol biosynthetic pathway and at least one of reduced or eliminated aldehyde dehydrogenase activity, reduced or eliminated acetolactate reductase activity; or a heterologous polynucleotide encoding a polypeptide having ketol-acid reductoisomerase activity.

  13. 3D scan to product design : Methods, techniques, and cases

    NARCIS (Netherlands)

    Lee, W.; Lee, B.; Kim, S.; Jung, H.; Jeon, E.; Choi, T.; You, H.

    2015-01-01

    3D scanning technology has derived great opportunities for ergonomic product designs. This paper is aimed to introduce various research cases and methods based on 3D scanning have conducted by an ergonomics laboratory in South Korea. Sizing systems and representative 3D models developed on

  14. Profitability Analysis of Three Methods of Suya Production and ...

    African Journals Online (AJOL)

    The study determined the economics of alternative methods of Suya production and marketing in Maiduguri Metropolitan Area in Borno State of Nigeria. Data were obtained from 108 respondents using questionnaire and oral interview schedule. Descriptive statistics, the gross margin, Ginni coefficient, market margin and ...

  15. Cyclic irradiation method for production of radioisotope tracers using ...

    African Journals Online (AJOL)

    Cyclic Irradiation Method (CIM) involving repeated irradiation of samples at regular time intervals to build up activity has been adopted for the production of 82 Br, 72 Ga, 140La, 24 Na and 46 Sc isotopes using the low power Ghana Research Reactor-1. The results indicate that the specific activities of radioisotopes from ...

  16. Host cells and methods for production of isobutanol

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, Larry Cameron; He, Hongxian; Huang, Lixuan Lisa; Okeefe, Daniel P.; Kruckeberg, Arthur Leo; Li, Yougen; Maggio-Hall, Lori; McElvain, Jessica; Nelson, Mark J.; Patnaik, Ranjan; Rothman, Steven Cary

    2017-10-17

    Provided herein are recombinant yeast host cells and methods for their use for production of isobutanol. Yeast host cells provided comprise an isobutanol biosynthetic pathway and at least one of reduced or eliminated aldehyde dehydrogenase activity, reduced or eliminated acetolactate reductase activity; or a heterologous polynucleotide encoding a polypeptide having ketol-acid reductoisomerase activity.

  17. DEVELOPMENT OF TOFU PRODUCTION METHOD WITH PROBIOTIC BACTERIA ADDITION

    Directory of Open Access Journals (Sweden)

    Dorota Zielińska

    2015-06-01

    Full Text Available The aim of the study was to develop a production method for tofu with probiotic bacteria under laboratory conditions. The works included: selection of a strain and tofu production conditions, and a storage test of the manufactured product. It was concluded that the sensory quality of tofu with the addition of different probiotic cultures did not differ significantly (p>0.01, depending on used strains and their mixtures, and the sample quality was comparable to the commercial product. It was observed that the number of Lactobacillus bacteria in study samples was the factor determining the palatability of tofu (r= 0.75. On the other hand, the sensory quality of products was significantly affected by the production method of tofu with the addition of probiotic bacteria. It was concluded that the formation of curds from soy beverage by the addition of CaSO4, followed by inoculation with Lactobacillus casei ŁOCK 0900 at the amount of 9.26 log CFU/g and incubation at temp. of 37C for 2h as well as for 20h are methods recommended for production tofu with regard to sensory qualities of the final product among all tested methods. The number of lactic acid bacteria in studied tofu samples was maintained at the high level (109-1010 CFU/g, and the number of Bifidobacterium animalis ssp lactis BB-12 bacteria did not exceed 103 CFU/g, whereas the number of Lactobacillus bacteria was equal to 108-109 CFU/g. For the period of 15 days of storage of tofu with probiotic bacteria at the temperature of 4C the number of lactic acid bacteria was maintained at the constant level of approx. 109 CFU/g. It was concluded that it is possible to produce tofu with probiotic bacteria that has acceptable sensory characteristics and a high number of lactic acid bacteria, therefore the product could be considered as a functional one.

  18. Quantification of geopolymers production by chemical methods- A short review

    Science.gov (United States)

    Siyal, Ahmer Ali; Azizli, Khairun Azizi; Ismail, Lukman; Man, Zakaria; Khan, Muhammad Irfan

    2015-07-01

    Inorganic polymers are the aluminosilicate materials possessing properties superior than ordinary Portland cement. In this review paper the chemical techniques used for determining degree of reaction of fly ash or the quantity of geopolymer material produced have been discussed. These methods determine the amount of product formed in percentages. The methods include HCl method, salicylic acid method, and picric acid method. These methods are not only used for fly ash but they are being used for determining the degree of reactions of metakaolin and other pozzolanic materials. The picric acid is an explosive material and its transportation in high concentration is dangerous. During its use in laboratory there is also the risk of fire associated with it. According to the microscopic analysis results the picric acid attack dissolves small amount of fine unreacted fly ash particles also. The salicylic acid is easily available but the residue from its treatment contains unreacted fly ash particles, hydration phases, and certain parts of unreacted OPC. The residue from HCl and salicylic acid attack contains MgO particles which is the part of the hydration product. The HCl method is mostly used due to simple process and lower standard deviation.

  19. Engineered microbes and methods for microbial oil production

    Energy Technology Data Exchange (ETDEWEB)

    Stephanopoulos, Gregory; Tai, Mitchell; Chakraborty, Sagar

    2015-02-10

    Some aspects of this invention provide engineered microbes for oil production. Methods for microbe engineering and for use of engineered microbes are also provided herein. In some embodiments, microbes are provided that are engineered to modulate a combination of rate-controlling steps of lipid synthesis, for example, a combination of a step generating metabolites, acetyl-CoA, ATP or NADPH for lipid synthesis (a push step), and a step sequestering a product or an intermediate of a lipid synthesis pathway that mediates feedback inhibition of lipid synthesis (a pull step). Such push-and-pull engineered microbes exhibit greatly enhanced conversion yields and TAG synthesis and storage properties.

  20. Systems and methods for separation and purification of products

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, Michael Joseph; Gilliam, Ryan J.; Self, Kyle; Mariansky, Gal; Leclerc, Margarete K.; Shipchandler, Riyaz Mohammed; Nagar, Jacob

    2017-11-28

    There are provided methods and systems for an electrochemical cell including an anode and a cathode where the anode is contacted with a metal ion that converts the metal ion from a lower oxidation state to a higher oxidation state. The metal ion in the higher oxidation state is reacted with an unsaturated hydrocarbon and/or a saturated hydrocarbon to form products. Separation and/or purification of the products as well as of the metal ions in the lower oxidation state and the higher oxidation state, is provided herein.

  1. Use of biotechnological methods in the potato seed production

    Directory of Open Access Journals (Sweden)

    Janet Igarza Castro

    2012-01-01

    Full Text Available Potato crop has a large economic importance. Worldwide, propagation of potato by in vitro culture of axillary buds is commonly used in the production of in vitro plants and microtubers. These constitute the core plant material of a production program of potatoes seeds. This study aimed to present a review of scientific literature on the potato propagation by biotechnological methods. This also describes the main characteristics of this crop and the tuberization processes under natural and in vitro conditions. Key words: in vitro plants, microtubers, minitubers, Temporary Inmmersion System.

  2. Engineered microbes and methods for microbial oil production

    Energy Technology Data Exchange (ETDEWEB)

    Stephanopoulos, Gregory; Tai, Mitchell; Chakraborty, Sagar

    2018-01-09

    Some aspects of this invention provide engineered microbes for oil production. Methods for microbe engineering and for use of engineered microbes are also provided herein. In some embodiments, microbes are provided that are engineered to modulate a combination of rate-controlling steps of lipid synthesis, for example, a combination of a step generating metabolites, acetyl-CoA, ATP or NADPH for lipid synthesis (a push step), and a step sequestering a product or an intermediate of a lipid synthesis pathway that mediates feedback inhibition of lipid synthesis (a pull step). Such push-and-pull engineered microbes exhibit greatly enhanced conversion yields and TAG synthesis and storage properties.

  3. Grasping devices and methods in automated production processes

    DEFF Research Database (Denmark)

    Fantoni, Gualtiero; Santochi, Marco; Dini, Gino

    2014-01-01

    In automated production processes grasping devices and methods play a crucial role in the handling of many parts, components and products. This keynote paper starts with a classification of grasping phases, describes how different principles are adopted at different scales in different applications...... and continues explaining different releasing strategies and principles. Then the paper classifies the numerous sensors used to monitor the effectiveness of grasping (part presence, exchanged force, stick-slip transitions, etc.). Later the grasping and releasing problems in different fields (from mechanical...... assembly to disassembly, from aerospace to food industry, from textile to logistics) are discussed. Finally, the most recent research is reviewed in order to introduce the new trends in grasping. They provide an outlook on the future of both grippers and robotic hands in automated production processes. (C...

  4. Methods and materials for deconstruction of biomass for biofuels production

    Science.gov (United States)

    Schoeniger, Joseph S; Hadi, Masood Zia

    2015-05-05

    The present invention relates to nucleic acids, peptides, vectors, cells, and plants useful in the production of biofuels. In certain embodiments, the invention relates to nucleic acid sequences and peptides from extremophile organisms, such as SSO1949 and Ce1A, that are useful for hydrolyzing plant cell wall materials. In further embodiments, the invention relates to modified versions of such sequences that have been optimized for production in one or both of monocot and dicot plants. In other embodiments, the invention provides for targeting peptide production or activity to a certain location within the cell or organism, such as the apoplast. In further embodiments, the invention relates to transformed cells or plants. In additional embodiments, the invention relates to methods of producing biofuel utilizing such nucleic acids, peptides, targeting sequences, vectors, cells, and/or plants.

  5. METHODS FOR FISH SPECIES IDENTIFICATION IN FOOD PRODUCTS

    Directory of Open Access Journals (Sweden)

    Ľubica Mrázová

    2010-07-01

    Full Text Available The need for identification of fishery products in food is currently ongoing issue for both consumers and producers of food. Consumer interest is driven in one the healthy diet, which prefers fish products, as an indispensable ingredient food and on the other hand, is a potential allergen causing health problems in humans allergic to fish protein. Allergy is a phenomenon that significantly affects human health, as well as overall life expectancy of an individual. The large number of fish species are known to trigger allergic reactions directly food intake or inhalation of fumes only, depending on the sensitivity orgamizmu. Large quantity of fish allergens are proteins from the stock protein to enzymes. Methods used for species identifications of fish in food products are PCR sequencing, multiplex PCR, PCR-RFLP, PCR-SSCP, RAPD, real-time PCR. doi:10.5219/25

  6. Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, F.; Tonn, B.

    1999-05-01

    This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

  7. A Survey Based on Product Usability and Feature Fatigue Analysis Methods for Online Product

    OpenAIRE

    Patel, Nirali; Singh, Dheeraj Kumar

    2016-01-01

    The Rise of E-commerce sites has made web an excellent source for purchase product without wasting time. For taking purchase decision and product designing usability evaluation and feature fatigue analysis are useful. In this paper, methods of usability evaluation and feature fatigue analysis are described. Usability evaluation and feature fatigue analysis uses online reviews as data source and identify issues for use it and described the review mining process. Application of usability evalua...

  8. Highly oxidized graphene oxide and methods for production thereof

    Energy Technology Data Exchange (ETDEWEB)

    Tour, James M.; Kosynkin, Dmitry V.

    2016-08-30

    A highly oxidized form of graphene oxide and methods for production thereof are described in various embodiments of the present disclosure. In general, the methods include mixing a graphite source with a solution containing at least one oxidant and at least one protecting agent and then oxidizing the graphite source with the at least one oxidant in the presence of the at least one protecting agent to form the graphene oxide. Graphene oxide synthesized by the presently described methods is of a high structural quality that is more oxidized and maintains a higher proportion of aromatic rings and aromatic domains than does graphene oxide prepared in the absence of at least one protecting agent. Methods for reduction of graphene oxide into chemically converted graphene are also disclosed herein. The chemically converted graphene of the present disclosure is significantly more electrically conductive than is chemically converted graphene prepared from other sources of graphene oxide.

  9. Geothermal Energy Production With Innovative Methods Of Geothermal Heat Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Swenson, Allen [GeoTek Energy, LLC, Frisco, TX (United States); Darlow, Rick [GeoTek Energy, LLC, Frisco, TX (United States); Sanchez, Angel [GeoTek Energy, LLC, Frisco, TX (United States); Pierce, Michael [GeoTek Energy, LLC, Frisco, TX (United States); Sellers, Blake [GeoTek Energy, LLC, Frisco, TX (United States)

    2014-12-19

    The ThermalDrive™ Power System (“TDPS”) offers one of the most exciting technological advances in the geothermal power generation industry in the last 30 years. Using innovations in subsurface heat recovery methods, revolutionary advances in downhole pumping technology and a distributed approach to surface power production, GeoTek Energy, LLC’s TDPS offers an opportunity to change the geothermal power industry dynamics.

  10. Methods used to streamline data preparation for memory products

    Science.gov (United States)

    DePesa, Paul; Leitermann, Wolfgang

    2001-01-01

    Historically the transcription of design data, in preparation for mask manufacture, has been to produce flat exposure tool data. Recent developments in hierarchical fracturing in the CATS' tool are reviewed and explained. Current design data, especially memory products or even microprocessors containing cache, benefit immensely from these developments. The pertinent CATS' commands are reviewed. Records of typical data fractures are presented and reviewed, showing the overall decrease in CPU usage with the hierarchal methods. The concomitant decrease in file sizes is also shown.

  11. Systems and methods for preparation and separation of products

    Energy Technology Data Exchange (ETDEWEB)

    Gilliam, Ryan J.; Boggs, Bryan; Self, Kyle; Leclerc, Margarete K.; Gorer, Alexander; Weiss, Michael J.; Miller, John H.; Mohanta, Samaresh

    2015-12-01

    There are provided methods and systems for an electrochemical cell including an anode and a cathode where the anode is contacted with a metal ion that converts the metal ion from a lower oxidation state to a higher oxidation state. The metal ion in the higher oxidation state is reacted with hydrogen gas, an unsaturated hydrocarbon, and/or a saturated hydrocarbon to form products.

  12. NEW MEAT PRODUCTS WITH IMMUNOMODULATORY EFFECT CREATION METHOD

    Directory of Open Access Journals (Sweden)

    I. V. Kaltovich

    2016-01-01

    Full Text Available New meat products with immunomodulatory effect creation method reflecting differential characteristics of technological stages of manufacture of those types of meat products, including issues on the selection of primary and secondary raw materials, guidelines for development of formulations and production technologies, legislative requirements towards its labeling, etc, has been developed for the first time. A list of prospective meat raw materials for the manufacture of products with immunomodulatory effect was established: beef, pork, rabbit meat, broiler chicken meat, turkey, veal, ostrich meat, which have high content of protein (14,3– 21,7%, low content of fat (1,2–16,1%, excluding pork (33,3%, high levels of minimum amino-acid score (90,0–104,0%, protein quality indicator(0,91–1,64, essential amino acid index (1,16-1,25, coefficient of utility of amino acid content (0,72–0,86 and close to optimum fatty acid content, and also contain a great number of vitamins and minerals which play a significant role for immunity improvement. It was determined that the following functional ingredients are recommended to use: amino acids (valine, leucine, isoleucine, methionine, threonine, arginine, tryptophan, lysine, histidin, phenylalanyl, vitamins and provitamins (C,E, beta-carotene, B vitamins(Bc, B12, PP, etc., P(bioflavonoid complex, H, K, minerals (calcium, magnesium, iron, cuprum, zinc, manganese, selenium, polyunsaturated fatty acids omega-3 and omega-6, pseudo-vitamins (L-carnitin, coenzyme Q10, polysaccharides and peptides naturally occurring(squalen, B-Carotene, ginger, shiitake mushrooms, probiotics and prebiotics, glutathione, indole and lycopienes, bioflavonoids, L-arginine, N-acetylcysteine, gel from seaweed «Lamifaren». The use of the developed meat products with immunomodulatory effect creation method by process engineers of meat processing factories will allow them to form a single scientifically grounded approach during the

  13. Applying Human-Centered Design Methods to Scientific Communication Products

    Science.gov (United States)

    Burkett, E. R.; Jayanty, N. K.; DeGroot, R. M.

    2016-12-01

    Knowing your users is a critical part of developing anything to be used or experienced by a human being. User interviews, journey maps, and personas are all techniques commonly employed in human-centered design practices because they have proven effective for informing the design of products and services that meet the needs of users. Many non-designers are unaware of the usefulness of personas and journey maps. Scientists who are interested in developing more effective products and communication can adopt and employ user-centered design approaches to better reach intended audiences. Journey mapping is a qualitative data-collection method that captures the story of a user's experience over time as related to the situation or product that requires development or improvement. Journey maps help define user expectations, where they are coming from, what they want to achieve, what questions they have, their challenges, and the gaps and opportunities that can be addressed by designing for them. A persona is a tool used to describe the goals and behavioral patterns of a subset of potential users or customers. The persona is a qualitative data model that takes the form of a character profile, built upon data about the behaviors and needs of multiple users. Gathering data directly from users avoids the risk of basing models on assumptions, which are often limited by misconceptions or gaps in understanding. Journey maps and user interviews together provide the data necessary to build the composite character that is the persona. Because a persona models the behaviors and needs of the target audience, it can then be used to make informed product design decisions. We share the methods and advantages of developing and using personas and journey maps to create more effective science communication products.

  14. Production of Molybdenum-99 using Neutron Capture Methods

    Energy Technology Data Exchange (ETDEWEB)

    Toth, James J; Greenwood, Lawrence R; Soderquist, Chuck Z; Wittman, Richard S; Pierson, Bruce D; Burns, Kimberly A; Lavender, Curt A; Painter, Chad L; Love, Edward F; Wall, Donald E

    2011-01-01

    Pacific Northwest National Laboratory (PNNL), operated by Battelle, has identified a reference process for the production of molybdenum-99 (99Mo) for use in a chromatographic generator to separate the daughter product, technetium-99m (99mTc). The reference process uses the neutron capture reaction of natural or enriched molybdenum oxide via the reaction 98Mo(n,γ)99Mo. The irradiated molybdenum is dissolved in an alkaline solution, whereby the molybdenum, dissolved as the molybdate anion, is loaded on a proprietary ion exchange material in the chromatographic generator. The approach of this investigation is to provide a systematic collection of technologies to make the neutron capture method for Mo-99 production economically viable. This approach would result in the development of a technetium Tc99m generator and a new type of target. The target is comprised of molybdenum, either natural or enriched, and is tailored to the design of currently operating U.S. research reactors. The systematic collection of technologies requires evaluation of new metallurgical methods to produce the target, evaluation of target geometries tailored to research reactors, and chemical methods to dissolve the irradiated target materials for use in a chromatographic generator. A Technical specification for testing the target and neutron capture method in a research reactor is also required. This report includes identification of research and demonstration activities needed to enable deployment of neutron capture production method, including irradiations of prototypic targets, chemical processing of irradiated targets, and loading and extraction tests of Mo99 and Tc99m on the sorbent material in a prototypic generator design. The prototypical generator design is based on the proprietary method and systems for isotope product generation. The proprietary methods and systems described in this report are clearly delineated with footnotes. Ultimately, the Tc-99m generator solution provided by

  15. Comparative Assessment of Advanced Gay Hydrate Production Methods

    Energy Technology Data Exchange (ETDEWEB)

    M. D. White; B. P. McGrail; S. K. Wurstner

    2009-06-30

    Displacing natural gas and petroleum with carbon dioxide is a proven technology for producing conventional geologic hydrocarbon reservoirs, and producing additional yields from abandoned or partially produced petroleum reservoirs. Extending this concept to natural gas hydrate production offers the potential to enhance gas hydrate recovery with concomitant permanent geologic sequestration. Numerical simulation was used to assess a suite of carbon dioxide injection techniques for producing gas hydrates from a variety of geologic deposit types. Secondary hydrate formation was found to inhibit contact of the injected CO{sub 2} regardless of injectate phase state, thus diminishing the exchange rate due to pore clogging and hydrate zone bypass of the injected fluids. Additional work is needed to develop methods of artificially introducing high-permeability pathways in gas hydrate zones if injection of CO{sub 2} in either gas, liquid, or micro-emulsion form is to be more effective in enhancing gas hydrate production rates.

  16. Methods and Algorithms for Economic MPC in Power Production Planning

    DEFF Research Database (Denmark)

    Sokoler, Leo Emil

    based on ADMM and Dantzig-Wolfe decomposition are proposed to solve these OCPs. Subproblems that arise in the decomposition algorithms are solved using structure-exploiting algorithms. To reduce computation time of the EMPC algorithms further, warm-start and early-termination strategies are employed...... is operational reserve planning. The operational reserves are activated to balance production and consumption in real-time. An EMPC scheme is presented for activation of operational reserves. Simulations based on a Faroe Islands case study show that signi_cant cost savings can be achieved using this strategy......-variance optimization strategy for EMPC of linear stochastic systems. - Tailored algorithms for solution of the OCPs that arise in EMPC of linear stochastic systems. - Methods for power production planning in small isolated power; the ORPP for unit commitment and economic dispatch, and an EMPC scheme for activation...

  17. Method for creating high carbon content products from biomass oil

    Science.gov (United States)

    Parker, Reginald; Seames, Wayne

    2012-12-18

    In a method for producing high carbon content products from biomass, a biomass oil is added to a cracking reactor vessel. The biomass oil is heated to a temperature ranging from about 100.degree. C. to about 800.degree. C. at a pressure ranging from about vacuum conditions to about 20,700 kPa for a time sufficient to crack the biomass oil. Tar is separated from the cracked biomass oil. The tar is heated to a temperature ranging from about 200.degree. C. to about 1500.degree. C. at a pressure ranging from about vacuum conditions to about 20,700 kPa for a time sufficient to reduce the tar to a high carbon content product containing at least about 50% carbon by weight.

  18. Multi-criteria evaluation methods in the production scheduling

    Science.gov (United States)

    Kalinowski, K.; Krenczyk, D.; Paprocka, I.; Kempa, W.; Grabowik, C.

    2016-08-01

    The paper presents a discussion on the practical application of different methods of multi-criteria evaluation in the process of scheduling in manufacturing systems. Among the methods two main groups are specified: methods based on the distance function (using metacriterion) and methods that create a Pareto set of possible solutions. The basic criteria used for scheduling were also described. The overall procedure of evaluation process in production scheduling was presented. It takes into account the actions in the whole scheduling process and human decision maker (HDM) participation. The specified HDM decisions are related to creating and editing a set of evaluation criteria, selection of multi-criteria evaluation method, interaction in the searching process, using informal criteria and making final changes in the schedule for implementation. According to need, process scheduling may be completely or partially automated. Full automatization is possible in case of metacriterion based objective function and if Pareto set is selected - the final decision has to be done by HDM.

  19. Systematic Derivation of Static Analyses for Software Product Lines

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Brabrand, Claus; Wasowski, Andrzej

    2014-01-01

    A recent line of work lifts particular verification and analysis methods to Software Product Lines (SPL). In an effort to generalize such case-by-case approaches, we develop a systematic methodology for lifting program analyses to SPLs using abstract interpretation. Abstract interpretation...... is a classical framework for deriving static analyses in a compositional, step-by-step manner. We show how to take an analysis expressed as an abstract interpretation and lift each of the abstract interpretation steps to a family of programs. This includes schemes for how to lift domain types, and combinators...

  20. Ruminal Methane Production on Simple Phenolic Acids Addition in in Vitro Gas Production Method

    Directory of Open Access Journals (Sweden)

    A. Jayanegara

    2009-04-01

    Full Text Available Methane production from ruminants contributes to total global methane production, which is an important contributor to global warming. In this experiment, six sources of simple phenolic acids (benzoic, cinnamic, phenylacetic, caffeic, p-coumaric and ferulic acids at two different levels (2 and 5 mM added to hay diet were evaluated for their potential to reduce enteric methane production using in vitro Hohenheim gas production method. The measured variables were gas production, methane, organic matter digestibility (OMD, and short chain fatty acids (SCFA. The results showed that addition of cinnamic, caffeic, p-coumaric and ferulic acids at 5 mM significantly (P p-coumaric > ferulic > cinnamic. The addition of simple phenols did not significantly decrease OMD. Addition of simple phenols tends to decrease total SCFA production. It was concluded that methane decrease by addition of phenolic acids was relatively small, and the effect of phenolic acids on methane decrease depended on the source and concentration applied.

  1. A Wavelet-Based Optimization Method for Biofuel Production

    Directory of Open Access Journals (Sweden)

    Maurizio Carlini

    2018-02-01

    Full Text Available On a global scale many countries are still heavily dependent on crude oil to produce energy and fuel for transport, with a resulting increase of atmospheric pollution. A possible solution to obviate this problem is to find eco-sustainable energy sources. A potential choice could be the use of biodiesel as fuel. The work presented aims to characterise the transesterification reaction of waste peanut frying oil using colour analysis and wavelet analysis. The biodiesel production, with the complete absence of mucilages, was evaluated through a suitable set of energy wavelet coefficients and scalograms. The physical characteristics of the biodiesel are influenced by mucilages. In particular the viscosity, that is a fundamental parameter for the correct use of the biodiesel, might be compromised. The presence of contaminants in the samples can often be missed by visual analysis. The low and high frequency wavelet analysis, by investigating the energy change of wavelet coefficient, provided a valid characterisation of the quality of the samples, related to the absence of mucilages, which is consistent with the experimental results. The proposed method of this work represents a preliminary analysis, before the subsequent chemical physical analysis, that can be develop during the production phases of the biodiesel in order to optimise the process, avoiding the presence of impurities in suspension in the final product.

  2. Genes related to xylose fermentation and methods of using same for enhanced biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Wohlbach, Dana J.; Gasch, Audrey P.

    2015-09-29

    The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

  3. Genes related to xylose fermentation and methods of using same for enhanced biofuel production

    Science.gov (United States)

    Wohlbach, Dana J.; Gasch, Audrey P.

    2014-08-05

    The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

  4. Genes related to xylose fermentation and methods of using same for enhanced biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Wohlbach, Dana J.; Gasch, Audrey P.

    2016-11-29

    The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

  5. Biodiesel Production from Microalgae by Extraction – Transesterification Method

    Directory of Open Access Journals (Sweden)

    Nguyen Thi Phuong Thao

    2013-11-01

    Full Text Available The environmental impact of using petroleum fuels has led to a quest to find a suitable alternative fuel source. In this study, microalgae were explored as a highly potential feedstock to produce biodiesel fuel. Firstly, algal oil is extracted from algal biomass by using organic solvents (n–hexan.  Lipid is contained in microalgae up to 60% of their weight. Then, Biodiesel is created through a chemical reaction known as transesterification between algal oil and alcohol (methanol with strong acid (such as H2SO4 as the catalyst. The extraction – transesterification method resulted in a high biodiesel yield (10 % of algal biomass and high FAMEs content (5.2 % of algal biomass. Biodiesel production from microalgae was studied through experimental investigation of transesterification conditions such as reaction time, methanol to oil ration and catalyst dosage which are deemed to have main impact on reaction conversion efficiency. All the parameters which were characterized for purified biodiesel such as free glycerin, total glycerin, flash point, sulfur content were analyzed according to ASTM standardDoi: http://dx.doi.org/10.12777/wastech.1.1.6-9Citation:  Thao, N.T.P., Tin, N.T., and Thanh, B.X. 2013. Biodiesel Production from Microalgae by Extraction – Transesterification Method. Waste Technology 1(1:6-9. Doi: http://dx.doi.org/10.12777/wastech.1.1.6-9

  6. Detection methods for mycotoxins in cereal grains and cereal products

    Directory of Open Access Journals (Sweden)

    Pascale Michelangelo N.

    2009-01-01

    Full Text Available Analytical methods for mycotoxins in cereals and cereal-based products require three major steps, including extraction, clean-up (to eliminate interferences from the extract and concentrate the analyte, and detection/determination of the toxin (by using suitable analytical instruments/technologies. Clean-up is essential for the analysis of mycotoxins at trace levels, and involves the use of solid phase extraction and multifunctional (e.g. MycoSep® or immunoaffinity columns. Different chromatographic methods are commonly used for quantitative determination of mycotoxins, including gas-chromatography (GC coupled with electron capture, flame ionization or mass spectrometry (MS detectors (mainly for type-A trichothecenes, and high-performance liquid chromatography (HPLC coupled with ultraviolet, diode array, fluorescence or MS detectors. The choice of method depends on the matrix and the mycotoxin to be analyzed. Liquid chromatography-tandem mass spectrometry (LC-MS/MS is spreading rapidly as a promising technique for simultaneous screening, identification and quantitative determination of a large number of mycotoxins. In addition, commercial immunometric assays, such as enzyme-linked immunosorbent assays (ELISA, are frequently used for screening purposes as well. Recently, a variety of emerging methods have been proposed for the analysis of mycotoxins in cereals based on novel technologies, including immunochromatography (i.e. lateral flow devices, fluorescence polarization immunoassays (FPIA, infrared spectroscopy (FT-NIR, molecularly imprinted polymers (MIPs and optical biosensors.

  7. A Novel Aerosol Method for the Production of Hydrogel Particles

    Directory of Open Access Journals (Sweden)

    Diana Guzman-Villanueva

    2011-01-01

    Full Text Available A novel method of generating hydrogel particles for various applications including drug delivery purposes was developed. This method is based on the production of hydrogel particles from sprayed polymeric nano/microdroplets obtained by a nebulization process that is immediately followed by gelation in a crosslinking fluid. In this study, particle synthesis parameters such as type of nebulizer, type of crosslinker, air pressure, and polymer concentration were investigated for their impact on the mean particle size, swelling behavior, and morphology of the developed particles. Spherical alginate-based hydrogel particles with a mean particle size in the range from 842 to 886 nm were obtained. Using statistical analysis of the factorial design of experiment it was found that the main factors influencing the size and swelling values of the particles are the alginate concentration and the air pressure. Thus, it was demonstrated that the method described in the current study is promising for the generation of hydrogel particles and it constitutes a relatively simple and low-cost system.

  8. Quality control methods for Aedes albopictus sterile male production.

    Directory of Open Access Journals (Sweden)

    Fabrizio Balestrino

    2017-09-01

    Full Text Available The capacity of the released sterile males to survive, disperse, compete with wild males and inseminate wild females is an essential prerequisite to be evaluated in any area-wide integrated pest management (AW-IPM programs including a sterile insect release method. Adequate quality control tests supported by standardized procedures need to be developed to measure these parameters and to identify and correct potential inappropriate rearing or handling methods affecting the overall male quality. In this study, we report results on the creation and validation of the first quality control devices designed to infer the survival and mating capacity of radio-sterilized Aedes albopictus males through the observation of their flight capacity under restricted conditions (flight organ device and after stress treatment (aspirator device. Results obtained consistently indicate comparable flight capacity and quality parameters between untreated and 35 Gy irradiated males while a negative impact was observed with higher radiation doses at all observation time performed. The male flight capacity registered with the proposed quality control devices can be successfully employed, with different predictive capacities and response time, to infer the adult male quality. These simple and cost-effective tools provide a valuable method to detect and amend potentially sub-standard procedures in the sterile male production line and hence contribute to maintaining optimal quality and field performance of the mosquitoes being released.

  9. The meat product quality control by a polarimetric method

    Science.gov (United States)

    Blokhina, Anastasia A.; Ryzhova, Victoria A.; Korotaev, Valery V.; Kleshchenok, Maksim A.

    2017-05-01

    Analysis of the polarization characteristics of the scattered radiation of biological tissues in some cases provides a qualitatively new results in the study of biological samples. These results can be used in medicine and food industry. As a result of the work, it was determined that the high concentration of scattering particles, the nonuniformity of their dimensions, forms make the task of creating an adequate optical model of a biotissue quite difficult, though many interesting tissue properties can be potentially studied by means of polarized light. In this case, the method for control the freshness of meat samples is considered for by obtaining the Stokes parameters of the polarized radiation scattered forward by the meat product.

  10. The production of fully deacetylated chitosan by compression method

    Directory of Open Access Journals (Sweden)

    Xiaofei He

    2016-03-01

    Full Text Available Chitosan’s activities are significantly affected by degree of deacetylation (DDA, while fully deacetylated chitosan is difficult to produce in a large scale. Therefore, this paper introduces a compression method for preparing 100% deacetylated chitosan with less environmental pollution. The product is characterized by XRD, FT-IR, UV and HPLC. The 100% fully deacetylated chitosan is produced in low-concentration alkali and high-pressure conditions, which only requires 15% alkali solution and 1:10 chitosan powder to NaOH solution ratio under 0.11–0.12 MPa for 120 min. When the alkali concentration varied from 5% to 15%, the chitosan with ultra-high DDA value (up to 95% is produced.

  11. Method and computer program product for maintenance and modernization backlogging

    Science.gov (United States)

    Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

    2013-02-19

    According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

  12. Environmentally-friendly product development: methods and tools

    National Research Council Canada - National Science Library

    Abele, Eberhard; Anderl, R; Birkhofer, Herbert

    2005-01-01

    ... to assess a product's environmental effects. Fig. 1. Vision of Environment as a key target for product development vvi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy...

  13. Method for producing 3-hydroxypropionic acid and other products

    Energy Technology Data Exchange (ETDEWEB)

    Lynch, Michael D.; Gill, Ryan T.; Lipscomb, Tanya E.W.

    2016-08-30

    This invention relates to metabolically engineered microorganism strains, such as bacterial strains, in which there is an increased utilization of malonyl-CoA for production of a chemical product, which includes 3-hydroxypropionic acid.

  14. Methods for producing 3-hydroxypropionic acid and other products

    Energy Technology Data Exchange (ETDEWEB)

    Lynch, Michael D.; Gill, Ryan T.; Lipscomb, Tanya E. W.

    2016-07-12

    This invention relates to metabolically engineered microorganism strains, such as bacterial strains, in which there is an increased utilization of malonyl-CoA for production of a chemical product, which includes 3-hydroxypropionic acid.

  15. Methodical Grounds of Managing the Product Quality Control

    OpenAIRE

    Shapoval Olena A.

    2014-01-01

    The article analyses the modern state of products quality control management. It justifies a necessity of organisation of the quality control system under conditions of uninterrupted flow line production. It reveals problems connected with a low level of the products quality control management. It forms a set of factors of internal and external environments, which should be taken into account in the process of selection of a type of managerial actions by the products quality control. It consi...

  16. PREDICTION OF MEAT PRODUCT QUALITY BY THE MATHEMATICAL PROGRAMMING METHODS

    Directory of Open Access Journals (Sweden)

    A. B. Lisitsyn

    2016-01-01

    Full Text Available Abstract Use of the prediction technologies is one of the directions of the research work carried out both in Russia and abroad. Meat processing is accompanied by the complex physico-chemical, biochemical and mechanical processes. To predict the behavior of meat raw material during the technological processing, a complex of physico-technological and structural-mechanical indicators, which objectively reflects its quality, is used. Among these indicators are pH value, water binding and fat holding capacities, water activity, adhesiveness, viscosity, plasticity and so on. The paper demonstrates the influence of animal proteins (beef and pork on the physico-chemical and functional properties before and after thermal treatment of minced meat made from meat raw material with different content of the connective and fat tissues. On the basis of the experimental data, the model (stochastic dependence parameters linking the quantitative resultant and factor variables were obtained using the regression analysis, and the degree of the correlation with the experimental data was assessed. The maximum allowable levels of meat raw material replacement with animal proteins (beef and pork were established by the methods of mathematical programming. Use of the information technologies will significantly reduce the costs of the experimental search and substantiation of the optimal level of replacement of meat raw material with animal proteins (beef, pork, and will also allow establishing a relationship of product quality indicators with quantity and quality of minced meat ingredients.

  17. Analysis of alternative methods and price politic of icewine production

    Directory of Open Access Journals (Sweden)

    V. Ostapenko

    2017-06-01

    Full Text Available The artificial methods of must concentration were discussed in current study: the microwave vacuum dehydration, reverse osmosis and cryoextraction. The main factor of using of alternative ways is deficiently low temperatures in winter period that are necessary for freezing grapes on vine according to the classical technology. The benefits and disadvantages of using of non-classic processes to obtain sweet musts were shown. The physical, chemical and sensory characteristics of wine made from grapes previously frozen by alternative and natural ways were analyzed. Indicators influencing on price of icewines and dessert wines bottle including agricultural climatic, technological and marketing factors were determined.  Detailed indicators highlight specificity of used technology and represent consumer preferences. Producers of winemaking regions of Argentina, New Zealand, Israel, Ukraine and Australia adhere to provisions that are inconsistent with the standards of Canada and the European countries regarding the icewine output. These instruments determine the processing of grapes and parameters reflect on parameters of the finished product.

  18. The methodical substantiation of measures to improve the use of basic production assets of the enterprise

    Directory of Open Access Journals (Sweden)

    Korol Svetlana Anatolevna

    2013-07-01

    Full Text Available The method of calculating the performance measures to improve the use of basic production assets of the enterprise: production cost, production volume, number of additional workers, depreciation and amortization.

  19. Managing Variety in Configure-to-Order Products - An Operational Method

    DEFF Research Database (Denmark)

    Myrodia, Anna; Hvam, Lars

    2014-01-01

    is to develop an operational method to analyze profitability of Configure-To-Order (CTO) products. The operational method consists of a four-step: analysis of product assortment, profitability analysis on configured products, market and competitor analysis and, product assortment scenarios analysis....... The proposed operational method is firstly developed based on both available literature and practitioners experience and subsequently tested on a company that produces CTO products. The results from this application are further discussed and opportunities for further research identified....

  20. Comparison of methods to identify crop productivity constraints in developing countries. A review

    NARCIS (Netherlands)

    Kraaijvanger, R.G.M.; Sonneveld, M.P.W.; Almekinders, C.J.M.; Veldkamp, T.

    2015-01-01

    Selecting a method for identifying actual crop productivity constraints is an important step for triggering innovation processes. Applied methods can be diverse and although such methods have consequences for the design of intervention strategies, documented comparisons between various methods are

  1. Development of a simulation method for the subsea production system

    Directory of Open Access Journals (Sweden)

    Jong Hun Woo

    2014-07-01

    Full Text Available The failure of a subsea production plant could induce fatal hazards and enormous loss to human lives, environments, and properties. Thus, for securing integrated design safety, core source technologies include subsea system integration that has high safety and reliability and a technique for the subsea flow assurance of subsea production plant and subsea pipeline network fluids. The evaluation of subsea flow assurance needs to be performed considering the performance of a subsea production plant, reservoir production characteristics, and the flow characteristics of multiphase fluids. A subsea production plant is installed in the deep sea, and thus is exposed to a high-pressure/low-temperature environment. Accordingly, hydrates could be formed inside a subsea production plant or within a subsea pipeline network. These hydrates could induce serious damages by blocking the flow of subsea fluids. In this study, a simulation technology, which can visualize the system configuration of subsea production processes and can simulate stable flow of fluids, was introduced. Most existing subsea simulations have performed the analysis of dynamic behaviors for the installation of subsea facilities or the flow analysis of multiphase flow within pipes. The above studies occupy extensive research areas of the subsea field. In this study, with the goal of simulating the configuration of an entire deep sea production system compared to existing studies, a DES-based simulation technology, which can logically simulate oil production processes in the deep sea, was analyzed, and an implementation example of a simplified case was introduced.

  2. Furan in food: headspace method and product survey.

    Science.gov (United States)

    Zoller, O; Sager, F; Reinhard, H

    2007-01-01

    Headspace gas chromatography-mass spectrometry (GC-MS) has been adapted for the efficient determination of furan in foods. Levels of furan in various foods were measured in order to identify the products that contribute most to the human intake of furan. Highest amounts were found in products that were heat treated in sealed containers such as jarred and canned food products and in crusty and dry products such as snacks, biscuits, bread crust, roasted wheat flour and roasted coffee beans. Of the analysed jarred baby food products those containing only meat and starch from rice and corn had low levels of furan. In addition, the fruit products showed similar low levels. Clearly higher concentrations were found in the vegetable and vegetable-meat products. For the adult population coffee seems to be an important product with respect to furan intake. Coffee brews from espresso-type machines had considerably higher amounts of furan than other coffee brews. This type of coffee is considered by experts to have the best coffee aroma. It is assumed that for regular coffee consumers coffee is the most important source of furan intake.

  3. Quantifying primary production of microphytobenthos: application of optical methods

    NARCIS (Netherlands)

    Morris, Edward

    2005-01-01

    Intertidal mudflats are an important component of estuaries. Benthic microalgae, also called microphytobenthos (MPB) are the main primary producers on these mudflats, and they can contribute up to 50% of total primary production of the estuary. Quantifying MPB biomass and primary production is,

  4. Advancing in software product management: An incremental method engineering approach

    NARCIS (Netherlands)

    van de Weerd, I.

    2009-01-01

    Hardly any figures exist on the success of product software companies. What we do know is that a good Software Product Management (SPM) practice pays off. However, not many IT-professionals know how to implement SPM practices in their organization, which causes many companies to not have the proper

  5. Performance Appraisal Method of Logistic Distribution for Fresh Agricultural Products

    OpenAIRE

    Yu, Hang; Zhang, Kai

    2010-01-01

    Through the initial selection, screening and simplification, a set of performance appraisal system of logistic distribution suited to fresh agricultural products is established. In the process of establishing the appraisal indicator, the representative appraisal indicator of logistic distribution of fresh agricultural products is further obtained by delivering experts’ survey and applying the ABC screening system. The distribution costs, transportation and service level belong to the first ...

  6. Methods and practices to diversify cell-based products.

    Science.gov (United States)

    Vertès, Alain A

    2017-12-15

    Medicinal signaling cell (MSC)-based products represent emerging treatments in various therapeutic areas including cardiometabolic, inflammation, autoimmunity, orthopedics, wound healing and oncology. Exploring innovation beyond minimally manipulated plastic-adherent ex vivo expanded allogeneic MSCs enables product delineation. Product delineation is on the critical path to maximize clinical benefits and market access. An innovation framework is presented here along various innovation dimensions comprising composition-of-matter by means of positive cell surface markers, formulation varying for example the cell dose or the preservation mode and medium, manufacturing to adapt the secretome of MSCs to the condition of interest, the mode of delivery and corresponding delivery devices, as well as molecular engineering and biomarkers. The rationale of the innovation space thus described applies generally to all cell-based therapies.

  7. Investigation of eco-friendly casein fibre production methods

    Science.gov (United States)

    Bier, M. C.; Kohn, S.; Stierand, A.; Grimmelsmann, N.; Homburg, S. V.; Rattenholl, A.; Ehrmann, A.

    2017-10-01

    The growing environmentally awareness of the consumers leads to a lot of new products in the textile industry. Either a sustainably produced textile or one which is created by reuse of a waste product is preferred. One possibility to create fibers from waste is using waste milk for casein fiber production. Opposite to several other biopolymers, however, spinning fibers from casein causes diverse problems. This article gives an overview of the investigations on how to produce fibres from the milk protein casein in a sustainable way, i.e. without formaldehyde or other polluting ingredients. Mechanical properties as well as water-resistance were investigated for chemical and physical modifications of the base composition. In this way, the positive influence of paraffin oil and wax as well as aggregation at high temperatures could be proven, while temperature treatment resulted in a higher E-modulus.

  8. History of the production complex: The methods of site selection

    Energy Technology Data Exchange (ETDEWEB)

    1987-09-01

    Experience taught the Atomic Energy Commission how to select the best possible sites for its production facilities. AEC officials learned from the precedents set by the wartime Manhattan Project and from their own mistakes in the immediate postwar years. This volume discusses several site selections. The sites covered are: (1) the Hanford Reservation, (2) the Idaho reactor site, (3) the Savannah River Plant, (4) the Paducah Gaseous Diffusion Plant, (5) the Portsmouth Gaseous Diffusion Plant, (6) the Fernald Production Center, (7) the PANTEX and Spoon River Plants, (8) the Rocky Flats Fabrication Facility, and (9) the Miamisburg and Pinellas plants. (JDH)

  9. International Comparison of Product Certification and Verification Methods for Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zheng, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  10. International comparison of product certification and verification methods for appliances

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zheng, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  11. Method for ph-controlled fermentation and biogas production

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention is in the field of biomass processing and bioenergy production and facilitates efficient biomass processing and an increased production of renewable energy from processing and anaerobic fermentation of a wide variety of organic materials. In order to control the pH value of ...... of the biomass during processing thereof, a CO 2 containing gas, such as e.g. biogas or flue gas, is added to the biomass present in the buffer tank and/or in the anaerobic digester operably linked to the buffer tank...

  12. Method for production of carbon nanofiber mat or carbon paper

    Science.gov (United States)

    Naskar, Amit K.

    2015-08-04

    Method for the preparation of a non-woven mat or paper made of carbon fibers, the method comprising carbonizing a non-woven mat or paper preform (precursor) comprised of a plurality of bonded sulfonated polyolefin fibers to produce said non-woven mat or paper made of carbon fibers. The preforms and resulting non-woven mat or paper made of carbon fiber, as well as articles and devices containing them, and methods for their use, are also described.

  13. Methods for conversion of lignocellulosic-derived products to transportation fuel precursors

    Science.gov (United States)

    Lilga, Michael A.; Padmaperuma, Asanga B.

    2017-10-03

    Methods are disclosed for converting a biomass-derived product containing levulinic acid and/or gamma-valerolactone to a transportation fuel precursor product containing diesel like hydrocarbons. These methods are expected to produce fuel products at a reduced cost relative to conventional approaches.

  14. Productivity studies in fish processing: methods of establishing work performance

    National Research Council Canada - National Science Library

    Amaria, P.J

    1974-01-01

    Relative merits of "Performance Rating", "Westinghouse Leveling Plan", "Methods-Time Measurement" and "Work Sampling" techniques used for establishing standard work performance in th fishing industry...

  15. Micro Nano PMP (Product-Method-Process) Graduate Course

    DEFF Research Database (Denmark)

    De Grave, Arnaud; Hansen, Hans Nørgaard

    2005-01-01

    This paper describes a framework for teaching in the development (design and manufacture) of products in the micro / nano scale in the Department of Manufacturing Engineering and Management (IPL) at the Technical University of Denmark (DTU). The training of students in this field involves both...

  16. Adaptive tensor product wavelet methods for the solution of PDEs

    NARCIS (Netherlands)

    Dijkema, T. J..

    2009-01-01

    We consider the problem of solving linear elliptic partial differential equations on a high-dimensional product domain, which we take to be the unit hypercube. These equations can arise, for example, when solving stochastic differential equations. With a standard, piecewise polynomial approximation

  17. Synthetic Environments as visualization method for product design

    NARCIS (Netherlands)

    Meijer, F.; van den Broek, Egon; Schouten, Theo E.; Damgrave, Roy Gerhardus Johannes; Damgrave, Roy G.J.; de Ridder, Huib; Rogowitz, Bernice E.; Pappas, Thrasyvoulos N.

    2010-01-01

    In this paper, we explored the use of low fidelity Synthetic Environments (SE; i.e., a combination of simulation techniques) for product design. We explored the usefulness of low fidelity SE to make design problems explicit. In particular, we were interested in the influence of interactivity on user

  18. A new manometric method for measuring carbon dioxide production ...

    African Journals Online (AJOL)

    This paper describe a technique for carbon dioxide (CO2) measurement based on the displacement of acidifying liquid in burette at constant pressure. It was adapted to allow the growth of ... The CO2 production rate was higher with the parental strain (6.5 mM/ h) than with the variants. The amount of CO2 produced was ...

  19. DISTRIBUTED ELECTRICAL POWER PRODUCTION SYSTEM AND METHOD OF CONTROL THEREOF

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a distributed electrical power production system wherein two or more electrical power units comprise respective sets of power supply attributes. Each set of power supply attributes is associated with a dynamic operating state of a particular electrical power unit....

  20. Simple Method for Enhanced Production of Secondary Metabolites ...

    African Journals Online (AJOL)

    iict

    2013-04-10

    Apr 10, 2013 ... Callus cultures of Charybdis congesta were initiated in vitro and the effect of growth regulators was tested on callus growth and secondary metabolite production. Among several standard media formulated for use in the present study, MS and B5 were found to be potentially active and facilitated.

  1. Oil Reservoir Production Optimization using Single Shooting and ESDIRK Methods

    DEFF Research Database (Denmark)

    Capolei, Andrea; Völcker, Carsten; Frydendall, Jan

    2012-01-01

    are large-scale problems and require specialized numerical algorithms. In this paper, we combine a single shooting optimization algorithm based on sequential quadratic programming (SQP) with explicit singly diagonally implicit Runge-Kutta (ESDIRK) integration methods and the a continuous adjoint method...

  2. Surveillance methods for identifying, characterizing, and monitoring tobacco products: potential reduced exposure products as an example

    Science.gov (United States)

    O’Connor, Richard J.; Cummings, K. Michael; Rees, Vaughan W.; Connolly, Gregory N.; Norton, Kaila J.; Sweanor, David; Parascandola, Mark; Hatsukami, Dorothy K.; Shields, Peter G.

    2015-01-01

    Tobacco products are widely sold and marketed, yet integrated data systems for identifying, tracking, and characterizing products are lacking. Tobacco manufacturers recently have developed potential reduction exposure products (PREPs) with implied or explicit health claims. Currently, a systematic approach for identifying, defining, and evaluating PREPs sold at the local, state or national levels in the US has not been developed. Identifying, characterizing, and monitoring new tobacco products could be greatly enhanced with a responsive surveillance system. This paper critically reviews available surveillance data sources for identifying and tracking tobacco products, including PREPs, evaluating strengths and weaknesses of potential data sources in light of their reliability and validity. Absent regulations mandating disclosure of product-specific information, it is likely that public health officials will need to rely on a variety of imperfect data sources to help identify, characterize, and monitor tobacco products, including PREPs. PMID:19959680

  3. Participatory methods for initiating manufacturing employees' involvement in product innovation

    DEFF Research Database (Denmark)

    Jensen, Anna Rose Vagn; Jensen, Christian Schou; Broberg, Ole

    2016-01-01

    approach that we apply to two case companies, this paper presents an empirical study of how to initiate involvement of manufacturing employees in R&D activities. We have used participatory methods from design thinking that has the ability to create relations between employees from different backgrounds...... and through a series of facilitated workshops we have investigated how these methods can initiate employee involvement. We see that participatory methods can improve understanding and relation between R&D and manufacturing departments, and thereby support a creative collaboration and emergence of employee...

  4. The multisection method for triple products and identities of Rogers-Ramanujan type

    Science.gov (United States)

    Chu, Wenchang; Wang, Chenying

    2008-03-01

    By applying the bisection and trisection method to Jacobi's triple product identity, we establish several identities factorizing sum and difference of infinite products, which lead, in turn, to new and elementary proofs for twenty identities of Rogers-Ramanujan type.

  5. Developing methods for strategic evaluation in agricultural research and production

    OpenAIRE

    Freier, Axel E.; Protil, Roberto Max

    2009-01-01

    We analyze instruments to evaluate investment strategies as new options for co-operatives within the wheat production chain. Using a value-based management the extension of our concept, a “cooperative balanced scorecard” is discussed as we propose the further differentiation of the scorecard’s financial perspective. This is a market development-driven approach as cooperatives may be regarded as commodity-price-intermediators for their members. Proposing this approach we use a simple model of ...

  6. Using Blueprinting Method For Developing Product-Service Systems

    OpenAIRE

    Boughnim, Nabil; Yannou, Bernard

    2005-01-01

    Nowadays, sustainable development is an important variant that economic actors must take into account seriously, especially about the environmental impact of their activities. Industrial companies have an urgent need to reduce the environmental impacts of their activities and resource use. There is a need to achieve more in economic terms, with less environmental impact. Various concepts aiming to reduce pollution, to intensify the use of goods, and to better manage the end-of life of product...

  7. METHOD AND PROCESS OF AUTOMATIC WEIGHTING OF PYROTECHNICAL PRODUCTS

    Directory of Open Access Journals (Sweden)

    Gheorghe POPESCU

    2011-11-01

    Full Text Available In this work, the authors present researches result for the amortization of free flutters in the process ofautomatically weigh pyrotechnical products in the shape of nubs.The study of free flutters is the beginning stagefor realization of a machines of weigh and automatic sorting. There fore the authors present the own solutionsof quick amortization of the oscillations of the arms of the balances installed on the rotary platter of themachine.

  8. Liquid column fractionation: a method of solvent fractionation of coal liquefaction and petroleum products

    Energy Technology Data Exchange (ETDEWEB)

    Burke, F.P.; Winschel, R.A.; Wooton, D.L.

    1979-07-01

    A method is described for the solvent fractionation of coal liquefaction and petroleum products which is both reproducible and considerably more rapid than many conventional solvent fractionation techniques. This method involves sequential elution of a sample injected onto an inert liquid chromatographic column. Applications of this method to coal liquefaction and petroleum products are given.

  9. PRODUCT OPTIMIZATION METHOD BASED ON ANALYSIS OF OPTIMAL VALUES OF THEIR CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Constantin D. STANESCU

    2016-05-01

    Full Text Available The paper presents an original method of optimizing products based on the analysis of optimal values of their characteristics . Optimization method comprises statistical model and analytical model . With this original method can easily and quickly obtain optimal product or material .

  10. Workable methods for risks control in the food chain production.

    Directory of Open Access Journals (Sweden)

    Lucilla Iacumin

    2008-04-01

    Full Text Available Several food pathologies due to new or already known micro-organisms occur all over the world every year. Food concerned are more and more frequently traditional typical, ethnical products coming from fast or slow food systems. Most of food-borne pathologies develop through neurological, gastrointestinal (watery, bloody or persistent diarrhoea abdominal pain, sickness and vomiting. The causes of these epidemics, apart from the concerned pathogen, are linked to the contaminated first matter or to contaminations occurred during food processing and consequently due to the lack of employment of the most fundamental sanitary measures and to non-control of the critical points of the HACCP (Hazard Analysis Critical Control Point systems. The pre-requirements to promote food health consist of the implementation of good agriculture husbandry and production practices, the use of HACCP systems, the training of the workers employed in the different productive rows and in the adoption of identification and traceability systems. The EU implemented the so-called hygiene pack, that is a list of rules imposing food control in each processing, marketing and consumption phase, from husbandry or cropping to consumer’s table, to promote health in food (circulating all over Europe.

  11. Modified lithium vanadium oxide electrode materials products and methods

    Science.gov (United States)

    Thackeray, Michael M.; Kahaian, Arthur J.; Visser, Donald R.; Dees, Dennis W.; Benedek, Roy

    1999-12-21

    A method of improving certain vanadium oxide formulations is presented. The method concerns fluorine doping formulations having a nominal formula of LiV.sub.3 O.sub.8. Preferred average formulations are provided wherein the average oxidation state of the vanadium is at least 4.6. Herein preferred fluorine doped vanadium oxide materials, electrodes using such materials, and batteries including at least one electrode therein comprising such materials are provided.

  12. Plants with modified lignin content and methods for production thereof

    Science.gov (United States)

    Zhao, Qiao; Chen, Fang; Dixon, Richard A.

    2014-08-05

    The invention provides methods for decreasing lignin content and for increasing the level of fermentable carbohydrates in plants by down-regulation of the NST transcription factor. Nucleic acid constructs for down-regulation of NST are described. Transgenic plants are provided that comprise reduced lignin content. Plants described herein may be used, for example, as improved biofuel feedstock and as highly digestible forage crops. Methods for processing plant tissue and for producing ethanol by utilizing such plants are also provided.

  13. Fluvial facies reservoir productivity prediction method based on principal component analysis and artificial neural network

    Directory of Open Access Journals (Sweden)

    Pengyu Gao

    2016-03-01

    Full Text Available It is difficult to forecast the well productivity because of the complexity of vertical and horizontal developments in fluvial facies reservoir. This paper proposes a method based on Principal Component Analysis and Artificial Neural Network to predict well productivity of fluvial facies reservoir. The method summarizes the statistical reservoir factors and engineering factors that affect the well productivity, extracts information by applying the principal component analysis method and approximates arbitrary functions of the neural network to realize an accurate and efficient prediction on the fluvial facies reservoir well productivity. This method provides an effective way for forecasting the productivity of fluvial facies reservoir which is affected by multi-factors and complex mechanism. The study result shows that this method is a practical, effective, accurate and indirect productivity forecast method and is suitable for field application.

  14. A Product Analysis Method and its Staging to Develop Redesign Competences

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp; Lenau, Torben Anker

    2013-01-01

    through an analysis of the existing product encompassing both a user-oriented and a technical perspective, as well as to synthesise solution proposals for the upgraded variant. In the course module Product Analysis and Redesign we have developed a product analysis method and a staging of it, which seems...... to be very productive. In this paper we present the product analysis method and its staging and we reflect on the students’ application of it. We conclude that the method is a valid contribution to develop the students’ redesign competences....

  15. Methods for large-scale production of AM fungi: past, present, and future.

    Science.gov (United States)

    Ijdo, Marleen; Cranenbrouck, Sylvie; Declerck, Stéphane

    2011-01-01

    Many different cultivation techniques and inoculum products of the plant-beneficial arbuscular mycorrhizal (AM) fungi have been developed in the last decades. Soil- and substrate-based production techniques as well as substrate-free culture techniques (hydroponics and aeroponics) and in vitro cultivation methods have all been attempted for the large-scale production of AM fungi. In this review, we describe the principal in vivo and in vitro production methods that have been developed so far. We present the parameters that are critical for optimal production, discuss the advantages and disadvantages of the methods, and highlight their most probable sectors of application.

  16. Systems, methods and apparatus for developing and maintaining evolving systems with software product lines

    Science.gov (United States)

    Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Pena, Joaquin (Inventor)

    2011-01-01

    Systems, methods and apparatus are provided through which an evolutionary system is managed and viewed as a software product line. In some embodiments, the core architecture is a relatively unchanging part of the system, and each version of the system is viewed as a product from the product line. Each software product is generated from the core architecture with some agent-based additions. The result may be a multi-agent system software product line.

  17. Method for Hot Real-Time Sampling of Gasification Products

    Energy Technology Data Exchange (ETDEWEB)

    Pomeroy, Marc D [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-29

    The Thermochemical Process Development Unit (TCPDU) at the National Renewable Energy Laboratory (NREL) is a highly instrumented half-ton/day pilot scale plant capable of demonstrating industrially relevant thermochemical technologies from lignocellulosic biomass conversion, including gasification. Gasification creates primarily Syngas (a mixture of Hydrogen and Carbon Monoxide) that can be utilized with synthesis catalysts to form transportation fuels and other valuable chemicals. Biomass derived gasification products are a very complex mixture of chemical components that typically contain Sulfur and Nitrogen species that can act as catalysis poisons for tar reforming and synthesis catalysts. Real-time hot online sampling techniques, such as Molecular Beam Mass Spectrometry (MBMS), and Gas Chromatographs with Sulfur and Nitrogen specific detectors can provide real-time analysis providing operational indicators for performance. Sampling typically requires coated sampling lines to minimize trace sulfur interactions with steel surfaces. Other materials used inline have also shown conversion of sulfur species into new components and must be minimized. Sample line Residence time within the sampling lines must also be kept to a minimum to reduce further reaction chemistries. Solids from ash and char contribute to plugging and must be filtered at temperature. Experience at NREL has shown several key factors to consider when designing and installing an analytical sampling system for biomass gasification products. They include minimizing sampling distance, effective filtering as close to source as possible, proper line sizing, proper line materials or coatings, even heating of all components, minimizing pressure drops, and additional filtering or traps after pressure drops.

  18. Comparison of new immunofluorescence method for detection of soy protein in meat products with immunohistochemical, histochemical, and ELISA methods

    Directory of Open Access Journals (Sweden)

    Michaela Petrášová

    2014-01-01

    Full Text Available Soy proteins are commonly used in the food industry thanks to their technological properties. However, soy is, along with cow’s milk, eggs, wheat, peanuts, tree nuts, fish, crustaceans, and molluscs, responsible for around 90% of food allergies, and is also one of the foodstuffs that can cause anaphylaxis. The aim of this work was to compare the immunofluorescence method for the detection of soy protein in meat products purchased from the retail market with other microscopic methods (immunohistochemical and histochemical, with the ELISA reference method and with the confirmatory results. Within the research, 127 meat products purchased in the retail network were examined using the immunofluorescence method used for the detection of soy protein. The method was compared to Enzyme-Linked ImmunoSorbent Assay (ELISA, immunohistochemical, and histochemical methods. According to McNemar’s test, non-compliance between the immunofluorescence method and immunohistochemical method was low. In addition, a significant difference between the fluorescence method and ELISA (P P < 0.01 was found. The immunofluorescence method was also compared with confirmatory results. According to McNemar’s test, non-compliance between the immunofluorescence method and confirmatory results was low. The results showed the possibilities of this new method to detect the content of soy protein in meat products.

  19. Online Methods and Analyzing Knowledge-Production: A Cautionary Tale

    Science.gov (United States)

    Ignacio, Emily Noelle

    2012-01-01

    Currently, many scholars have increasingly turned to the Internet to examine diasporic communities and corresponding identities. While I am happy that social scientists have embraced the use of online methods in studying communities formed within cyberspace, I also believe that we should continually reflect on whether our research is best served…

  20. Application of multi-block methods in cement production

    DEFF Research Database (Denmark)

    Svinning, K.; Høskuldsson, Agnar

    2008-01-01

    distribution and the two last blocks the superficial microstructure analysed by differential thermo gravimetric analysis. The multi-block method is used to identify the role of each part. The score vectors of each block can be analysed separately or together with score vectors of other blocks. Stepwise...

  1. A novel method of aluminum-gadolinium master alloy production

    Science.gov (United States)

    Maksimtsev, Konstantin; Krylosov, Andrey; Polovov, Ilya; Zhilyakov, Arkadiy; Belikov, Sergey; Volkovich, Vladimir; Rebrin, Oleg

    2017-09-01

    A new method for manufacturing aluminum-gadolinium master alloy was designed. It is based on an exchange reaction between metallic aluminum and gadolinium fluoride. The structure on the synthesized alloys with different gadolinium content was investigated. Al and Al3Gd were the main phases present in the alloys. Mechanical and thermophysical properties of the master-alloys obtained were measured.

  2. Materials and methods for efficient succinate and malate production

    Energy Technology Data Exchange (ETDEWEB)

    Jantama, Kaemwich; Haupt, Mark John; Zhang, Xueli; Moore, Jonathan C; Shanmugam, Keelnatham T; Ingram, Lonnie O' Neal

    2014-04-08

    Genetically engineered microorganisms have been constructed to produce succinate and malate in mineral salt media in pH-controlled batch fermentations without the addition of plasmids or foreign genes. The subject invention also provides methods of producing succinate and malate comprising the culture of genetically modified microorganisms.

  3. Effects of wastewater microalgae harvesting methods on polyhydroxybutyrate production.

    Science.gov (United States)

    Rahman, Asif; Anthony, Renil J; Sathish, Ashik; Sims, Ronald C; Miller, Charles D

    2014-03-01

    Microalgae have gained considerable attention recently as a sustainable means to produce biofuels and bioproducts. It has previously been demonstrated that single strain microalgae can be harvested and processed through a wet lipid extraction procedure (WLEP). After WLEP processing, acetone, butanol, ethanol, and biodiesel can be produced, and growth of recombinant Escherichia coli can be achieved from the microalgae. This study demonstrates the application of different wastewater microalgae harvesting techniques and processing through WLEP on the production of polyhydroxybutyrate (PHB) by E. coli. The harvesting techniques include: cationic potato starch (CPS), cationic corn starch (CCS), aluminum sulfate, and centrifugation. The microalgae-based media were used to grow E. coli to ∼10(13)CFU/mL and produce approximately 7.8% of dry cell weight as PHB. This study demonstrates the feasibility of harvesting wastewater algae to produce PHB and the potential for bioproduct generation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Diesel-soluble lignin oils and methods of their production

    DEFF Research Database (Denmark)

    2016-01-01

    Solvent consumption in supercritical ethanol, propanol or butanol treatment of either refined pre-extracted lignin or comparatively impure lignin-rich solid residual from hydrothermally pretreated lignocellulosic biomass can be minimized by conducting the reaction at very high loading of lignin...... to solvent. Comparatively impure, crude lignin- rich solid residual can be directly converted by supercritical alcohol treatment to significantly diesel-soluble lignin oil without requirement for pre-extraction or pre- solubilisation of lignin or for added reaction promoters such as catalysts, hydrogen donor...... co-solvents, acids, based or H2 gas. O:C ratio of product oil can readily be obtained using crude lignin residual in such a process at levels 0.20 or lower....

  5. Molecular Methods for Identification of Microorganisms in Traditional Meat Products

    Science.gov (United States)

    Cocolin, Luca; Dolci, Paola; Rantsiou, Kalliopi

    Traditional fermentations are those that have been used for centuries and even pre-date written historical records. Fermentation processes have been developed to upgrade plant and animal materials, to yield a more acceptable food, to add flavor, to prevent the growth of pathogenic and spoilage microorganisms, and to preserve food without refrigeration (Hesseltine & Wang, 1980). Among fermented foods, sausages are the meat products with a longer history and tradition. It is often assumed that sausages were invented by the Sumerians, in what is Iraq today, around 3000 BC. Chinese sausage làcháng, which consisted of goat and lamb meat, was first mentioned in 589 BC. Homer, the poet of The Ancient Greece, mentioned a kind of blood sausage in the Odyssey (book 20, verse 25), and Epicharmus (ca. 550 BC-ca. 460 BC) wrote a comedy entitled “The Sausage”.

  6. Methods to reduce production of oil sands mature fine tailings

    Energy Technology Data Exchange (ETDEWEB)

    Ozum, B. [Apex Engineering Inc., Edmonton, AB (Canada); Scott, J.D. [Alberta Univ., Edmonton, AB (Canada)

    2010-07-01

    This paper discussed experimental findings regarding the use of alternative extraction additives in the Clark Hot Water Bitumen Extraction (CHWBE) process to improve the geotechnical characteristics of the tailings and the salinity of the recycled release water. It also discussed results regarding the production of non-segregating tailings (NST) from the blend of cyclone underflow and thickener underflow using either calcium oxide (CaO) or CaO and carbon dioxide (CO{sub 2}) as additives. Sodium hydroxide (NaOH) is currently used in CHWBE to increase extraction efficiency, but this additive also creates tailings with poor settling and consolidation properties and high salinity in the recycled release water. The use of CaO for adjusting pH, ozone (O{sub 3}) for producing surfactants from bitumen asphaltenes, and biodiesel as surfactant additives were found to increase the efficiency of the extraction process, produce tailings with friendlier geotechnical properties, and eliminate saline concentrations in the recycled release water. The use of the described alternative extraction additives and the NST production processes has the potential to reduce the environmental impacts of oil sands plants, potentially providing a solution to the problems associated with Low Temperature Extraction and Consolidated Tailings processes. The solubility of CaO and O{sub 3} as a function of temperature could potentially allow the extraction temperature to be reduced. O{sub 3} was found to work better as an oxidant to produce surfactants from bitumen when the ore-slurry is first treated with CaO. Study on a larger scale is required. 23 refs., 7 tabs., 7 figs.

  7. NEW METHOD OF PRODUCTION OF ALUNINUM SILICON ALLOYS

    Directory of Open Access Journals (Sweden)

    V. K. Afanasiev

    2015-01-01

    Full Text Available A new approach to the preparation of aluminum-silicon alloys, based on the concept of the leading role of hydrogen in determining the structure and properties of alloys consists in using as charge materials of silicon dioxide (silica and hydrogen instead of crystalline silicon was described. Practical ways to implement the new method were proposed on the example of industrial alloys prepared on charge synthetic alloy. It is shown that the application of the proposed method allows to improve the mechanical properties and reduce the coefficient of thermal expansion alloys, Al-Si. The effect of heat treatment on mechanical properties, density and thermal expansion of synthetic alloys was researched.

  8. Method for the production of hydrogen from water vapor

    Energy Technology Data Exchange (ETDEWEB)

    Seitzer, W.H.

    1975-05-07

    The invention concerns a one-stage method for thermal water dissociation and the removal of the oxygen from the resulting oxyhydrogen gas. According to the invention a) the wet oxyhydrogen gas is led past a wall made of hard-to-melt oxide, preferably zirconium oxide, which allows the penetration of oxygen, b) the oxygen diffusing through the wall is continuously removed by reaction with a reducing gas, and c) the thus produced reaction heat is used to heat the plant.

  9. Form gene clustering method about pan-ethnic-group products based on emotional semantic

    Science.gov (United States)

    Chen, Dengkai; Ding, Jingjing; Gao, Minzhuo; Ma, Danping; Liu, Donghui

    2016-09-01

    The use of pan-ethnic-group products form knowledge primarily depends on a designer's subjective experience without user participation. The majority of studies primarily focus on the detection of the perceptual demands of consumers from the target product category. A pan-ethnic-group products form gene clustering method based on emotional semantic is constructed. Consumers' perceptual images of the pan-ethnic-group products are obtained by means of product form gene extraction and coding and computer aided product form clustering technology. A case of form gene clustering about the typical pan-ethnic-group products is investigated which indicates that the method is feasible. This paper opens up a new direction for the future development of product form design which improves the agility of product design process in the era of Industry 4.0.

  10. The Architecture Improvement Method: cost management and systematic learning about strategic product architectures

    NARCIS (Netherlands)

    de Weerd-Nederhof, Petronella C.; Wouters, Marc; Teuns, Steven J.A.; Hissel, Paul H.

    2007-01-01

    The architecture improvement method (AIM) is a method for multidisciplinary product architecture improvement, addressing uncertainty and complexity and incorporating feedback loops, facilitating trade-off decision making during the architecture creation process. The research reported in this paper

  11. Analysis of standard and innovative methods for allocating upstream and refinery GHG emissions to oil products

    NARCIS (Netherlands)

    Moretti, Christian; Moro, Alberto; Edwards, Robert A; Rocco, Matteo Vincenzo; Colombo, Emanuela

    2017-01-01

    Alternative fuel policies need accurate and transparent methods to find the embedded carbon intensity of individual refinery products. This study investigates different ways of allocating greenhouse gases emissions deriving from refining and upstream crude oil supply. Allocation methods based on

  12. Methods of detecting and controlling mucoid Pseudomonas biofilm production

    Science.gov (United States)

    Yu, Hongwei D. (Inventor); Qiu, Dongru (Inventor)

    2013-01-01

    Compositions and methods for detecting and controlling the conversion to mucoidy in Pseudomonas aeruginosa are disclosed. The present invention provides for detecting the switch from nonmucoid to mucoid state of P. aeruginosa by measuring mucE expression or MucE protein levels. The interaction between MucE and AlgW controls the switch to mucoidy in wild type P. aeruginosa. Also disclosed is an alginate biosynthesis heterologous expression system for use in screening candidate substances that inhibit conversion to mucoidy.

  13. Bayreuth Productivity Analysis-a method for ascertaining and improving the holistic service productivity of acute care hospitals.

    Science.gov (United States)

    Pfannstiel, Mario Alexander

    2016-01-01

    The healthcare sector is lacking a method with which hospitals can measure the extent to which they achieve their goals in terms of aggregate productivity from both patients' and employees' perspectives. The Bayreuth Productivity Analysis (BPA) provides a solution to this problem because it uses two standardized questionnaires-one for patients and one for employees-to ascertain productivity at hospitals. These questionnaires were developed in several steps according to the principles of classical test theory, and they consist of six dimensions (information, organization, climate, methods, infrastructure and equipment) of five items each. One item describes a factual situation relevant to productivity and services so that it makes a contribution to the overall productivity of a hospital. After individualized evaluation of these items, the dimensions are subjectively weighted in the two questionnaires. The productivity index thus ascertained can be considered "holistic" when all patients and employees in a hospital make a differentiated assessment and weigh off each of the dimensions. In conclusion, the BPA constitutes a simple yet practicable method to ascertain and improve the holistic service productivity of hospitals. Copyright © 2014 John Wiley & Sons, Ltd.

  14. Awareness, Use and Effectiveness of Models and Methods in New Product Development

    NARCIS (Netherlands)

    Nijssen, E.J.; Lieshout, K.

    1995-01-01

    Despite the large number of new product models and methods available to improve the success rate of new products, empirical evidence proves that only a few companies actually use them. This seems rather strange because today the pressure on companies to improve their new product development is high.

  15. One-step method for the production of nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Kostic, Milivoje [Chicago, IL; Golubovic, Mihajlo [Chicago, IL; Hull, John R [Downers Grove, IL; Choi, Stephen U. S. [Napersville, IL

    2010-05-18

    A one step method and system for producing nanofluids by a particle-source evaporation and deposition of the evaporant into a base fluid. The base fluid such (i.e. ethylene glycol) is placed in a rotating cylindrical drum having an adjustable heater-boat-evaporator and heat exchanger-cooler apparatus. As the drum rotates, a thin liquid layer is formed on the inside surface of the drum. A heater-boat-evaporator having an evaporant material (particle-source) placed within its boat evaporator is adjustably positioned near a portion of the rotating thin liquid layer, the evaporant material being heated thereby evaporating a portion of the evaporant material, the evaporated material absorbed by the liquid film to form nanofluid.

  16. One-step method for the production of nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Kostic, Milivoje [Sycamore, IL; Golubovic, Mihajlo [Chicago, IL; Hull, John [Downers Grove, IL; Choi, Stephen U. S. [Naperville, IL

    2011-08-16

    A one step method and system for producing nanofluids by a nanoparticle-source evaporation and deposition of the evaporant into a base fluid. The base fluid such oil or ethylene glycol is placed in a rotating cylindrical drum having an adjustable heater-boat-evaporator and heat exchanger-cooler apparatus. As the drum rotates, a thin liquid layer is formed on the inside surface of the drum. An insulated heater-boat-evaporator having an evaporant material (nanoparticle-source) placed within its boat evaporator is adjustably positioned near a portion of the rotating thin liquid layer, the evaporant material being heated thereby evaporating a portion of the evaporant material and forming nanoparticles, the nanoparticles absorbed by the liquid film to form nanofluid.

  17. Method and apparatus for hydrogen production from water

    Science.gov (United States)

    Muradov, Nazim Z. (Inventor)

    2012-01-01

    A method, apparatuses and chemical compositions are provided for producing high purity hydrogen from water. Metals or alloys capable of reacting with water and producing hydrogen in aqueous solutions at ambient conditions are reacted with one or more inorganic hydrides capable of releasing hydrogen in aqueous solutions at ambient conditions, one or more transition metal compounds are used to catalyze the reaction and, optionally, one or more alkali metal-based compounds. The metal or alloy is preferably aluminum. The inorganic hydride is from a family of complex inorganic hydrides; most preferably, NaBH.sub.4. The transition metal catalyst is from the groups VIII and IB; preferably, Cu and Fe. The alkali metal-based compounds are preferably NaOH, KOH, and the like. Hydrogen generated has a purity of at least 99.99 vol. % (dry basis), and is used without further purification in all types of fuel cells, including the polymer electrolyte membrane (PEM) fuel cell.

  18. Method for the production of fabricated hollow microspheroids

    Energy Technology Data Exchange (ETDEWEB)

    Wickramanayake, Shan; Luebke, David R.

    2015-06-09

    The method relates to the fabrication of a polymer microspheres comprised of an asymmetric layer surrounding a hollow interior. The fabricated hollow microsphere is generated from a nascent hollow microsphere comprised of an inner core of core fluid surrounded by a dope layer of polymer dope, where the thickness of the dope layer is at least 10% and less than 50% of the diameter of the inner core. The nascent hollow microsphere is exposed to a gaseous environment, generating a vitrified hollow microsphere, which is subsequently immersed in a coagulation bath. Solvent exchange produces a fabricated hollow microsphere comprised of a densified outer skin surrounding a macroporous inner layer, which surrounds a hollow interior. In an embodiment, the polymer is a polyimide or a polyamide-imide, and the non-solvent in the core fluid and the coagulation bath is water. The fabricated hollow microspheres are particularly suited as solvent supports for gas separation processes.

  19. Method for dispersing catalyst onto particulate material and product thereof

    Science.gov (United States)

    Utz, Bruce R.; Cugini, Anthony V.

    1992-01-01

    A method for dispersing finely divided catalyst precursors onto the surface of coal or other particulate material includes the steps of forming a wet paste mixture of the particulate material and a liquid solution containing a dissolved transition metal salt, for instance a solution of ferric nitrate. The wet paste mixture is in a state of incipient wetness with all of this solution adsorbed onto the surfaces of the particulate material without the presence of free moisture. On adding a precipitating agent such as ammonia, a catalyst precursor such as hydrated iron oxide is deposited on the surfaces of the coal. The catalyst is activated by converting it to the sulfide form for the hydrogenation or direct liquefaction of the coal.

  20. Measurement methods to assess methane production of individual dairy cows in a barn

    NARCIS (Netherlands)

    Wu, L.

    2016-01-01

    Abstract Mitigation of methane production from dairy cows is critical to reduce the dairy industry’s contribution to the production of greenhouse gases. None of current used methane measurement methods are flawless and application of the methods is limited to assess the

  1. The effect of the production method on the mechanical strength of an alumina porous hollow fiber

    NARCIS (Netherlands)

    de Wit, Patrick; van Daalen, Frederique S.; Benes, Nieck E.

    2017-01-01

    The mechanical strength of inorganic porous hollow fibers is an important property and is strongly affected by the production method. Three production methods for fibers are compared: non-solvent induced phase separation (NIPS), bio-ionic gelation with an internal multivalent ion source (BIG-I), and

  2. A Modified CTAB Method for DNA Extraction from Soybean and Meat Products

    National Research Council Canada - National Science Library

    Stefanova, Petya; Taseva, Marieta; Georgieva, Tzveta; Gotcheva, Velitchka; Angelov, Angel

    2013-01-01

    .... Therefore, the modified CTAB method could be the method of choice for DNA extraction from complex and variously processed meat products and from raw and low-processed soybean products in order to ensure a reliable quality and authenticity control in the meat food chain.

  3. 77 FR 62259 - Certain Polyimide Films, Products Containing Same, and Related Methods Commission Determination...

    Science.gov (United States)

    2012-10-12

    ... Polyimide Films, Products Containing Same, and Related Methods Commission Determination To Affirm the Final Initial Determination With Respect to the Issues on Review and To Terminate the Investigation AGENCY: U.S... after importation of certain polyimide films, products containing same, and related methods by reason of...

  4. Quantitation of protein content by biuret method during production of Yellow Fever Vaccine.

    Science.gov (United States)

    Shrivastaw, K P; Singh, S; Sharma, S B; Sokhey, J

    1995-12-01

    Protein content of 60 batches of Yellow Fever Vaccine was measured by Biuret method and was compared to the values obtained by Kjeldahl method. Statistical analysis did not show any difference between the two methods. The Biuret method is specific, easy to carry out and takes little time for protein estimation during production of Yellow Fever Vaccine.

  5. A METHOD OF IMPROVING THE PRODUCTION OF BIOMASS OR A DESIRED PRODUCT FROM A CELL

    DEFF Research Database (Denmark)

    1998-01-01

    the F¿1? ATPase or portions thereof is expressed, may be selected from prokaryotes and eukaryotes. In particular the DNA encoding F¿1? or a portion thereof may be derived from bacteria and eukaryotic microorganisms such as yeasts, other fungi and cell lines of higher organisms and be selected from......The production of biomass or a desired product from a cell can be improved by inducing conversion of ATP to ADP without primary effects on other cellular metabolites or functions which is achieved by expressing an uncoupled ATPase activity in said cell and incubating the cell with a suitable...... substrate to produce said biomass or product. This is conveniently done by expressing in said cell the soluble part (F¿1?) of the membrane bound (F¿0?F¿1? type) H?+¿-ATPase or a portion of F¿1? exhibiting ATPase activity. The organism from which the F¿1? ATPase or portions thereof is derived, or in which...

  6. Improvement of production layout based on optimum production balancing scale results by using Moodie Young and Comsoal method

    Science.gov (United States)

    Ikhsan, Siregar; Ulina Anastasia Sipangkar, Tri; Prasetio, Aji

    2017-09-01

    This research was conducted at a make to order production system company which is engaged in the car body of the vehicle. One of the products produced is dump truck which is one kind of transportation for the transport of goods equipped with hydraulics to facilitate goods’ loading and unloading process. The company has 7 work stations with different cycle times. Companies often experience delays in order delivery. The production process on the production floor has not been done optimally where there is a build up of work in process in some work centres. The build up of work in process (WIP) products is seen in the welding and painting stations. Stacking that occurs on the production line may cause the company to be liable for damages due to delays in product completion. The WIP occurs due to unbalanced paths can be seen from the variance of cycle time of each station is very diverse. The time difference of each work element is due to the allocation of work elements to each work centre unevenly. On the basis of the allocation of uneven work elements, the dump truck assembly line is made. The analysis is done by using Moodie Young and Comsoal method to do the balancing of production line. The result of layout improvement by using systematic layout planning (SLP) method is change the composition of the work centre from 7 into 4 work centre which enables the movement of material to be more effective and efficient so that it can get an efficient and effective production trajectory and can solve existing problems. The result of the track balancing is then used as a guide in constructing a new layout based on the balancing result with the most optimum method.

  7. Low temperature method for the production of calcium phosphate fillers

    Directory of Open Access Journals (Sweden)

    Nastro Alfonso

    2004-03-01

    Full Text Available Abstract Background Calcium phosphate manufactured samples, prepared with hydroxyapatite, are used as either spacers or fillers in orthopedic surgery, but these implants have never been used under conditions of mechanical stress. Similar conditions also apply with cements. Many authors have postulated that cements are a useful substitute material when implanted in vivo. The aim of this research is to develop a low cristalline material similar to bone in porosity and cristallinity. Methods Commercial hydroxyapatite (HAp and monetite (M powders are mixed with water and compacted to produce cylindrical samples. The material is processed at a temperature of 37–120 degrees C in saturated steam to obtain samples that are osteoconductive. The samples are studied by X-ray powder diffraction (XRD, Vickers hardness test (HV, scanning electron microscopy (SEM, and porosity evaluation. Results The X-ray diffractions of powders from the samples show patterns typical of HAp and M powders. After thermal treatment, no new crystal phase is formed and no increase of the relative intensity of the peaks is obtained. Vicker hardness data do not show any relationship with treatment temperature. The total porosity decreases by 50–60% according to the specific thermal treatment. Scanning electron microscopy of the surfaces of the samples with either HAp 80%-M 20% (c or Hap 50%-M 50% (f, show cohesion of the powder grains. Conclusions The dissolution-reprecipitation process is more intesive in manufactured samples (c and (f, according to Vickers hardness data. The process occurs in a steam saturated environment between 37 degrees and 120 degrees C. (c (f manufactured samples show pore dimension distributions useful to cellular repopulation in living tissues.

  8. A METHODOLOGY FOR IMPROVING PRODUCTIVITY OF THE EXISTING SHIPBUILDING PROCESS USING MODERN PRODUCTION CONCEPTs AND THE AHP METHOD

    Directory of Open Access Journals (Sweden)

    Venesa Stanić

    2017-01-01

    Full Text Available In recent years, shipyards have been facing difficulties in controlling operational costs. To maintain continual operation of all of the facilities, a shipyard must analyze ways of utilizing present production systems for assembling interim vessel products as well as other types of industrial constructions. In the past, new machines continuously improved shipbuilding processes, including software and organizational restructuring, but management continued to search for a modern technological concept that will provide higher productivity, greater profit and overall reduction in costs. In the article the authors suggest implementing Design for Production, Design for Maintainability and Group Technology principles using the Analytical Hierarchy Process (AHP to apply to multi criteria decision making methods as an efficient tool for maintaining international competitiveness in the modern shipbuilding industry. This novel methodology is implemented through four phases. In the first phase, the present situation analysis is suggested for a real shipyard by establishing closest relations among production lines. The second phase presents a constraint analysis that must be evaluated when developing the design solution. The third phase involves generating a typical number of selected alternatives of the Design for Production, Design for Maintainability and Group Technology principles. In the fourth phase, the optimal design solution is selected using the Analytical Hierarchy Process (AHP method. The solution incorporating this modern methodology will improve productivity, profit and lead to decreasing operational costs.

  9. Comparing marine primary production estimates through different methods and development of conversion equations

    Directory of Open Access Journals (Sweden)

    Aurore eRegaudie-De-Gioux

    2014-07-01

    Full Text Available Numerous studies have compared the rates of primary production using various techniques at specific locations and times. However, these comparisons are local and cannot be used to compare or scale rates of primary production using different methods across ocean basins or seasonal time scales. Here, we quantify the range in rates of primary production derived using different techniques and provide equations that allow conversions of estimates between different methods. We do so on the basis of a compilation of data on volumetric estimates of primary production rates concurrently estimated with at least two different methods. We observed that the comparison of estimates of marine phytoplankton primary production derived from different methods reveals very large variations between methods. The highest primary production estimates are derived using the 18O method, which may provide the best and more generally applicable estimate of gross primary production. The regression equations presented in this work provide the best available approach to convert data across methods and therefore integrate and synthesize available and future data derived using different methods.

  10. Downstream processing and chromatography based analytical methods for production of vaccines, gene therapy vectors, and bacteriophages

    Science.gov (United States)

    Kramberger, Petra; Urbas, Lidija; Štrancar, Aleš

    2015-01-01

    Downstream processing of nanoplexes (viruses, virus-like particles, bacteriophages) is characterized by complexity of the starting material, number of purification methods to choose from, regulations that are setting the frame for the final product and analytical methods for upstream and downstream monitoring. This review gives an overview on the nanoplex downstream challenges and chromatography based analytical methods for efficient monitoring of the nanoplex production. PMID:25751122

  11. Exposure method development for risk assessment to cosmetic products using a standard composition.

    Science.gov (United States)

    Chevillotte, G; Ficheux, A S; Morisset, T; Roudot, A C

    2014-06-01

    In a risk assessment of cosmetic products, it is necessary to know both qualitative and quantitative compositions. Currently, European Regulation No. 1223/2009 requires the industries to provide ingredient lists for finished cosmetic products but not their concentrations. Ingredient concentrations are available in few bibliographic references but in an incomplete and approximate way. In this study, we propose a method to qualitatively and quantitatively estimate the composition of a cosmetic product. This method has the advantages of being applicable to all cosmetic products and supplying concentration data for all ingredients. The results obtained seem quite fair compared to literature data. Applied to nail polish as an example, this method can be used to assess exposure per ingredient according to the Monte Carlo probabilistic method. It should be promising to assess the consumer risk to cosmetic product compositions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. A Method of Flow-Shop Re-Scheduling Dealing with Variation of Productive Capacity

    Directory of Open Access Journals (Sweden)

    Kenzo KURIHARA

    2005-02-01

    Full Text Available We can make optimum scheduling results using various methods that are proposed by many researchers. However, it is very difficult to process the works on time without delaying the schedule. There are two major causes that disturb the planned optimum schedules; they are (1the variation of productive capacity, and (2the variation of products' quantities themselves. In this paper, we deal with the former variation, or productive capacities, at flow-shop works. When production machines in a shop go out of order at flow-shops, we cannot continue to operate the productions and we have to stop the production line. To the contrary, we can continue to operate the shops even if some workers absent themselves. Of course, in this case, the production capacities become lower, because workers need to move from a machine to another to overcome the shortage of workers and some shops cannot be operated because of the worker shortage. We developed a new re-scheduling method based on Branch-and Bound method. We proposed an equation for calculating the lower bound for our Branch-and Bound method in a practical time. Some evaluation experiments are done using practical data of real flow-shop works. We compared our results with those of another simple scheduling method, and we confirmed the total production time of our result is shorter than that of another method by 4%.

  13. Methods Used to Support a Life Cycle of Complex Engineering Products

    Science.gov (United States)

    Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.; Eremenko, Andrey O.

    2016-08-01

    Management of companies involved in the design, development and operation of complex engineering products recognize the relevance of creating systems for product lifecycle management. A system of methods is proposed to support life cycles of complex engineering products, based on fuzzy set theory and hierarchical analysis. The system of methods serves to demonstrate the grounds for making strategic decisions in an environment of uncertainty, allows the use of expert knowledge, and provides interconnection of decisions at all phases of strategic management and all stages of a complex engineering product lifecycle.

  14. Scalable Method for Extracting Soiling Rates from PV Production Data: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Deceglie, Michael G.; Muller, Matthew; Kurtz, Sarah; Defreitas, Zoe

    2016-06-21

    We present a method for analyzing time series production data from photovoltaic systems to extract the rate at which energy yield is affected by the accumulation of dust, dirt, and other forms of soiling. We describe an approach that is based on prevailing methods which consider the change in energy production during dry periods. The method described here builds upon these methods by considering a statistical sample of soiling intervals from each site under consideration. The method enables straightforward application to a large number of sites with minimal parameterization of data-filtering requirements. Furthermore, it enables statistical confidence intervals and comparisons between sites.

  15. A Scalable Method for Extracting Soiling Rates from PV Production Data

    Energy Technology Data Exchange (ETDEWEB)

    Deceglie, Michael G.; Muller, Matthew; Defreitas, Zoe; Kurtz, Sarah

    2016-11-21

    We present a method for analyzing time series production data from photovoltaic systems to extract the rate at which energy yield is affected by the accumulation of dust, dirt, and other forms of soiling. We describe an approach that is based on prevailing methods which consider the change in energy production during dry periods. The method described here builds upon these methods by considering a statistical sample of soiling intervals from each site under consideration. The method enables straightforward application to a large number of sites with minimal parameterization of data-filtering requirements. Furthermore, it enables statistical confidence intervals and comparisons between sites.

  16. Maximizing Product Innovation through Adaptive Application of User-Centered Methods for Defining Customer Value

    Directory of Open Access Journals (Sweden)

    Tonje Overvik Olsen

    2011-12-01

    Full Text Available Establishing deep understanding of customers is a prerequisite to improve success rates of innovations under today’s transient business conditions. This paper summarizes methods and tools to increase customer understanding in new product development. A case study of developing an office chair was conducted, utilizing four such methods (web based survey, interview, observation and workshops to provide directions for later application. Results indicate that methods revealing emotionally-related customer information (workshops and observation are resource-intensive and provide less amount of information directly applicable to the product development team. The opposite is the case for methods providing more functionally-related information (web based survey and interview. The overall conclusion is that the latter methods are more suitable for product improvements, while the former may provide valuable information for creating more differentiated products.

  17. Nondestructive quality evaluation of agro-products using acoustic vibration methods-A review.

    Science.gov (United States)

    Zhang, Wen; Lv, Zhenzhen; Xiong, Shuangli

    2017-06-14

    Quality evaluation of agro-products is quite important because it is the basis for growers, distributers, and consumers. Various novel and emerging nondestructive methods were proposed for quality evaluation of agro-products. The acoustic vibration method is one of the major nondestructive methods for agro-products in pre- and postharvest research and industrial practice. Acoustic vibration characteristics of agro-products can be used for texture evaluation, prediction of optimum eating and harvest ripeness, ripeness classification and defect detection. Generally, there are three parts in the process of acoustic vibration method, including the excitation module, signal acquisition module, and signal-processing module. The impact method and forced method are two excitation methods in the excitation module, and there are contact and noncontact sensors for vibration measurement in the signal acquisition module. Noncontact measurement can meet the requirement of rapid and nondestructive measurement, especially for the on-line detection. However, increasing demand for accurate and cost-effective measurement remains a challenge in the agro-products industry. Comparison of acoustic vibration methods and traditional destructive methods was also discussed, which helps to give a more comprehensive assessment for the acoustic vibration method.

  18. Method of treating human and animal waste products and products so obtained

    Energy Technology Data Exchange (ETDEWEB)

    Taluntais, A.F.

    1977-08-17

    Animal slurry was complexed with an aldehyde and a nitrogenous substance with free amine or amide groups to give a substantially sterile and odorless fertilizer which slowly released nutrients into the soil when spread. For example, 11.3 kg 37% HCHO was mixed with 45 g pig slurry and 9 kg urea added. The mixture was adjusted to pH 2.5 with H/sub 2/SO/sub 4/, allowed to stand overnight, neutralized with CaCO/sub 3/, and mixed with 8 kg peat moss. The product was a compost-like controlled release fertilizer of 32.2% dry matter content.

  19. The New Product Watch: Successes and Challenges of Crowdsourcing as a Method of Surveillance.

    Science.gov (United States)

    Nyman, Amy L; Biener, Lois

    2016-01-01

    New smokeless tobacco (eg, snus and dissolvable tobacco products) and nontobacco nicotine products (eg, e-cigarettes) have emerged in recent years amid widespread speculation about locations of test marketing, toxic constituents, and consumer targeting. The New Product Watch was a pilot online monitoring system aimed at filling these information gaps by using a form of crowdsourcing: recruiting volunteers to visit local retailers and report their findings. With very little funding, the New Product Watch gathered county-specific data on new product availability in 19 states as well as trend data on product marketing and demand, and completed 2 rounds of product purchases and subsequent toxic constituent analyses. Data were collected over a 2-year period, between 2009 and 2011. Despite the successes, we found that this small-scale, volunteer effort was not a sustainable method for ensuring continuous, systematic surveillance of new product availability, marketing, and toxicity.

  20. A Knowledge Modeling Method for Computer Graphics Design & Production Based on Ontology

    Directory of Open Access Journals (Sweden)

    Chen Tong

    2017-01-01

    Full Text Available As one of the most critical stages of CG (Computer Graphics industry, CG design & production needs the support of professional knowledge and practice experience of multidisciplinary. With the outstanding performance in knowledge sharing, integration and reuse, knowledge modeling could increase greatly the efficiency, reduce the cost and avoid repeated error in CG design & production. However, knowledge modeling of CG design & production differs greatly from those of other fields. On the one hand, it is similar to physical product design, which involves great deal of tacit knowledge such as modeling skills, reasoning knowledge and so on. On the other hand, as film, CG design & production needs a lot of unstructured description information. The heterogeneity between physical product and film makes knowledge modeling more complicated. Thus a systematic knowledge modelling method based on Ontology is proposed to aid CG design & production in this paper. CG animation knowledge is capture and organized from viewpoint of three aspects: requirements and design and production. The knowledge are categorized into static and dynamic knowledge, and Ontology is adopted to construct a hierarchic model to organize the knowledge, so as to offer a uniform communication semantic foundations for designers from different fields. Based on animation script, the CG design task model is proposed to drive the organization and management of different knowledge involved in CG design & production. Finally, we apply this method in the knowledge modeling of naked-eye animation design and production to illustrate effectiveness of this method.

  1. Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

    Science.gov (United States)

    Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

    2005-05-01

    In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

  2. Truncated chlorophyll antenna size of the photosystems - a practical method to improve microalgal productivity and hydrogen production in mass culture

    Energy Technology Data Exchange (ETDEWEB)

    Polle, J.E.W.; Kanakagiri, S.; EonSeon Jin; Masuda, Tatsuru; Melis, A. [University of California, Berkeley, CA (United States). Dept. of Plant and Microbial Biology

    2002-12-01

    Unicellular microalgae hold the promise of commercial exploitation in mass culture for hydrogen and biomass production. In any microalgal production system, the achievable photosynthetic productivity and light utilization efficiency of the algae are the single most important factors in the determination of cost. Microalgal mass cultures growing under full sunlight have a low per chlorophyll (Chl) productivity since, at high photon flux densities, the rate of photon absorption by the Chl antenna far exceeds the rate at which photons can be utilized for photosynthesis. Excess photons are dissipated as fluorescence or heat. Up to 80% of absorbed photons could thus be wasted, reducing light conversion efficiencies and cellular productivity to fairly low levels. This shortcoming could possibly be alleviated by the development of microalgal strains with a limited number of Chl molecules in the light-harvesting antenna of their photosystems, i.e., strains that have a truncated Chl antenna size. It is expected that individually, such microalgae will not be able to saturate rates of photosynthesis and, thus, will not be subject to wasteful dissipation of excitation energy. In turn, the productivity of the mass culture will be improved. The method of choice to reach the objective of a 'truncated light-harvesting Chl antenna' size (tla) employed DNA insertional and chemical mutagenesis of the unicellular green algae Chlamydomonas reinhardtii and Dunaliella salina, followed by a rigorous screening protocol to identify mutants with a smaller light-harvesting Chl antenna size. Molecular and genetic analyses of isolated tla strains were performed. Biochemical and physiological analyses in terms of photosynthetic productivity and light conversion efficiencies are presented. The results show that a truncated Chl antenna size of PSII is more important than that of PSI in terms of the photosynthetic productivity of a mass culture. A list of genes that confer a &apos

  3. Method for producing ethanol and co-products from cellulosic biomass

    Science.gov (United States)

    Nguyen, Quang A

    2013-10-01

    The present invention generally relates to processes for production of ethanol from cellulosic biomass. The present invention also relates to production of various co-products of preparation of ethanol from cellulosic biomass. The present invention further relates to improvements in one or more aspects of preparation of ethanol from cellulosic biomass including, for example, improved methods for cleaning biomass feedstocks, improved acid impregnation, and improved steam treatment, or "steam explosion."

  4. PRODUCTION OF BIMETALLIC SLUGS OF WORM WHEELS BY METHOD OF ELECTROSLAG REMELTING

    Directory of Open Access Journals (Sweden)

    E. I. Marukovich

    2005-01-01

    Full Text Available Thе technology of worm-wheel production, based on mechanical amalgamation of bronze crown with hub is described. The technology of production of the worm-wheel bimetallic ingots in chill and by means of liquid forging is considered. The technology of production of bimetallic ingots by means of electroslag melting (ESM is described and advantages of this method in comparison to the previous one are indicated.

  5. The Development of Testing Methods for Characterizing Emissions and Sources of Exposures from Polyurethane Products

    Science.gov (United States)

    The relationship between onsite manufacture of spray polyurethane foam insulation (SPFI) and potential exposures is not well understood. Currently, no comprehensive standard test methods exist for characterizing and quantifying product emissions. Exposures to diisocyanate compoun...

  6. Considerations Concerning the Application of Target Costing Method in the Industry of Dairy Products

    Directory of Open Access Journals (Sweden)

    Mortură Laura Alexandra

    2017-01-01

    Full Text Available In the present conditions of the market economy, which is in full process of globalization, theadaptation of the more complex and diverse needs of the final consumers, leads to a permanentcreation and development of new products and services by the entities in order to satisfy theseneeds. Thus, the entities must apply efficient and tested methods for determining and provisioningthe costs which will result from launching new products on the market, methods which wouldsupport and ensure the best quality – price report, and which are to reduce the production costs upto a level of not affecting the quality of the final product. Such a method, according to specialtyliterature is the modern method of Target Costing.

  7. Composition of entomopathogenic fungus and method of production and application for insect control

    Science.gov (United States)

    Microsclerotia of entomopathogenic fungi including Metarhizium and Lecanicillium species are produced using various production methods such as liquid culture fermentation. These microsclerotia can be dried with various agronomic carriers to produce viable, microsclerotia-containing compositions with...

  8. Methods for increasing production of 3-methyl-2-butenol using fusion proteins

    Science.gov (United States)

    Chou, Howard; Keasling, Jay D.

    2017-04-25

    The present invention relates to methods and compositions for increasing production of 3-methyl-2-butenol in a de novo synthetic pathway in a genetically modified host cell using isopentenyl disphosphate (IPP) as a substrate.

  9. Effect of feeding methods on the astaxanthin production by Phaffia rhodozyma in fed-batch process

    National Research Council Canada - National Science Library

    Danilo Gomes Moriel; Miriam Blumel Chociai; Iara Maria Pereira Machado; José Domingos Fontana; Tania Maria Bordin Bonfim

    2005-01-01

    The effect of feeding methods on the production of astaxanthin by the yeast Phaffia rhodozyma ATCC 24202 was studied, using continuous and pulsed fed-batch processes and low cost materials as substrates...

  10. 78 FR 42974 - Certain Sintered Rare Earth Magnets, Methods of Making Same and Products Containing Same...

    Science.gov (United States)

    2013-07-18

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Sintered Rare Earth Magnets, Methods of Making Same and Products Containing Same... making same and products containing same by reason of infringement of certain claims of United States...

  11. Sustainable Industrial Production – undergraduate course on methods and tools in industry’s environmental work

    DEFF Research Database (Denmark)

    Wenzel, Henrik

    2003-01-01

    The course aims at teaching key methods and tools for industry’s environmental work. It focuses on operational tools targeted for environmental improvements at various levels of intervention: the product, the production, the process and the emission. At these intervention levels, engineering disc...

  12. Comparative analysis of chemical similarity methods for modular natural products with a hypothetical structure enumeration algorithm.

    Science.gov (United States)

    Skinnider, Michael A; Dejong, Chris A; Franczak, Brian C; McNicholas, Paul D; Magarvey, Nathan A

    2017-08-16

    Natural products represent a prominent source of pharmaceutically and industrially important agents. Calculating the chemical similarity of two molecules is a central task in cheminformatics, with applications at multiple stages of the drug discovery pipeline. Quantifying the similarity of natural products is a particularly important problem, as the biological activities of these molecules have been extensively optimized by natural selection. The large and structurally complex scaffolds of natural products distinguish their physical and chemical properties from those of synthetic compounds. However, no analysis of the performance of existing methods for molecular similarity calculation specific to natural products has been reported to date. Here, we present LEMONS, an algorithm for the enumeration of hypothetical modular natural product structures. We leverage this algorithm to conduct a comparative analysis of molecular similarity methods within the unique chemical space occupied by modular natural products using controlled synthetic data, and comprehensively investigate the impact of diverse biosynthetic parameters on similarity search. We additionally investigate a recently described algorithm for natural product retrobiosynthesis and alignment, and find that when rule-based retrobiosynthesis can be applied, this approach outperforms conventional two-dimensional fingerprints, suggesting it may represent a valuable approach for the targeted exploration of natural product chemical space and microbial genome mining. Our open-source algorithm is an extensible method of enumerating hypothetical natural product structures with diverse potential applications in bioinformatics.

  13. Comparative Analysis of Accounting Methods for Reporting of Restaurant Business Production and Sales Activity

    OpenAIRE

    Andriy Tsyutsyak

    2014-01-01

    Completeness and accuracy of disclosing information on restaurant business operations directly affect the formation of income and expenditure rates in accounting system and reporting. The article provides the analysis of the accounting method and arranging documentation of restaurant businesses production and trade activities. Comparative evaluation of accounting methods of disclosing procurement of raw materials, public catering domestic production and sales in the restaurant sector has been...

  14. Development of continuous pharmaceutical production processes supported by process systems engineering methods and tools

    DEFF Research Database (Denmark)

    Gernaey, Krist; Cervera Padrell, Albert Emili; Woodley, John

    2012-01-01

    The pharmaceutical industry is undergoing a radical transition towards continuous production processes. Systematic use of process systems engineering (PSE) methods and tools form the key to achieve this transition in a structured and efficient way.......The pharmaceutical industry is undergoing a radical transition towards continuous production processes. Systematic use of process systems engineering (PSE) methods and tools form the key to achieve this transition in a structured and efficient way....

  15. Carbon nanotube production over MCM-41 type catalytic materials via CVD method

    OpenAIRE

    Nalbant, Aslı; Nalbant, Asli; YÜRÜM, YUDA; Yurum, Yuda

    2010-01-01

    We investigate the effects of mesoporous catalyst synthesis methods over carbon nanotube (CNT) production. Metal incorporated mesoporous catalysts were synthesized by two different microwave assisted synthesis methods. In the first method, MCM-41 mesoporous materials were synthesized with microwave radiation and then metal was impregnated into these as-synthesized MCM-41 samples. In the second method metal was added into the raw materials directly and then the mixture was treated in the mi...

  16. Validated stability indicating methods for determination of nitazoxanide in presence of its degradation products

    Directory of Open Access Journals (Sweden)

    Nouruddin W. Ali

    2012-04-01

    Full Text Available Three sensitive, selective and reproducible stability-indicating methods are presented for determination of nitazoxanide (NTZ, a new anti-protozoal drug, in presence of its degradation products. Method A utilizes the first derivative of ratio spectra spectrophotometry by measurement of the amplitude at 364.4 nm using one of the degradation products as a divisor. Method B is a chemometric-assisted spectrophotometry, where principal component regression (PCR and partial least squares (PLS were applied. These two approaches were successfully applied to quantify NTZ in presence of degradation products using the information included in the absorption spectra in the range 260–360 nm. Method C is based on the separation of NTZ from its degradation products followed by densitometric measurement of the bands at 254 nm. The separation was carried out on silica gel 60F254, using chloroform–methanol–ammonia solution–glacial acetic acid (95:5:1:1 by volume, pH=5.80 as a developing system. These methods are suitable as stability-indicating methods for the determination of NTZ in presence of its degradation products either in bulk powder or in pharmaceutical formulations. Statistical analysis of the results has been carried out revealing high accuracy and good precision. Keywords: Nitazoxanide, Degradation, Derivative spectrophotometry, Chemometrics, TLC-densitometry, Stability-indicating methods

  17. On two methods to estimate production of Eichhornia crassipes in the eutrophic Pampulha reservoir (MG, Brazil).

    Science.gov (United States)

    Greco, M K B; de Freitas, J R

    2002-08-01

    This paper deals with variations in biomass and in the production of Eichhornia crassipes (water hyacinth) in a eutrophic tropical reservoir. Net production was assessed by both a traditional method and a demographic approach. The initial biomass ranges from 96 g DW.m-2 to a maximum of 2027 g DW.m-2. Net production estimates varied greatly according to which method was used to calculate them (traditional: 20.6 ton DW.hectare-1.year-1, demographic: 226.9 ton DW.year-1).

  18. On two methods to estimate production of Eichhornia crassipes in the eutrophic Pampulha reservoir (MG, Brazil

    Directory of Open Access Journals (Sweden)

    GRECO M. K. B.

    2002-01-01

    Full Text Available This paper deals with variations in biomass and in the production of Eichhornia crassipes (water hyacinth in a eutrophic tropical reservoir. Net production was assessed by both a traditional method and a demographic approach. The initial biomass ranges from 96 g DW.m-2 to a maximum of 2027 g DW.m-2. Net production estimates varied greatly according to which method was used to calculate them (traditional: 20.6 ton DW.hectare-1.year-1, demographic: 226.9 ton DW.year-1.

  19. Structured catalyst bed and method for conversion of feed materials to chemical products and liquid fuels

    Science.gov (United States)

    Wang, Yong , Liu; Wei, [Richland, WA

    2012-01-24

    The present invention is a structured monolith reactor and method that provides for controlled Fischer-Tropsch (FT) synthesis. The invention controls mass transport limitations leading to higher CO conversion and lower methane selectivity. Over 95 wt % of the total product liquid hydrocarbons obtained from the monolithic catalyst are in the carbon range of C.sub.5-C.sub.18. The reactor controls readsorption of olefins leading to desired products with a preselected chain length distribution and enhanced overall reaction rate. And, liquid product analysis shows readsorption of olefins is reduced, achieving a narrower FT product distribution.

  20. Method of technological control of proportional electromagnets for control systems of their production

    Science.gov (United States)

    Lankin, A. M.; Lankin, M. V.; Lankina, M. Y.

    2017-02-01

    This article describes the algorithm of the method of technological control of proportional solenoids to control their production process. An important element in the process of production of proportional solenoids is to identify deviations from the nominal mode of its occurrence. This situation shows the relevance of developing a method of technological control of proportional solenoids providing information on process control in a short time. The proposed algorithm consists of four steps: measuring the dynamic characteristics of the magnetization of electromagnet testing, the use of principal component analysis to reduce the dimension of the analyzed information, the classification of products by the condition and sub-standards, the definition of the numerical values of the manufacturing process variations using a calibration method. This approach allows us to determine the type and the degree of impairment of the mode of the process that will lead to effective management of the production process of the electromagnetic actuators.

  1. Progress in Large-Scale Production of Graphene. Part 2: Vapor Methods

    Science.gov (United States)

    Li, Yuan; Chopra, Nitin

    2015-01-01

    Graphene is critical for applications in electronics, optical devices, thermal management, energy, and biosystems, while at the same time cost-effective and large-scale production of graphene is a challenge. In this regard, vapor phase graphene synthesis is a bottom-up approach, which could be compatible with device industry fabrication methods. Here, we review the state-of-the-art techniques developed for the scalable production of graphene in bottom-up approaches. These mainly include the epitaxial growth and chemical vapor deposition methods. Product quality, structure, and yields for different graphene growth techniques are discussed and specific examples are described. The article also emphasizes promising methods for scalable graphene production but still needing a deeper research understanding.

  2. Straightforward analytical method to determine opium alkaloids in poppy seeds and bakery products

    NARCIS (Netherlands)

    Lopez Sanchez, Patricia; Pereboom-de Fauw, Diana P.K.H.; Mulder, Patrick P.J.; Spanjer, Martien; Stoppelaar, de Joyce; Mol, Hans G.J.; Nijs, de Monique

    2018-01-01

    A straightforward method to determine the content of six opium alkaloids (morphine, codeine, thebaine, noscapine, papaverine and narceine) in poppy seeds and bakery products was developed and validated down to a limit of quantification (LOQ) of 0.1 mg/kg. The method was based on extraction with

  3. MULTIAGENT TECHNOLOGIES’ METHOD IN MANAGING BUSINESS-PROCESSES OF THE TECHNICAL PREPARING FOR PRODUCTION

    Directory of Open Access Journals (Sweden)

    P.N. Pavlenko

    2005-02-01

    Full Text Available  The method of managing the process of the extended productions technological preparation is given. The method is used for integrating the automated systems of industrial assignment of  CAD/CAM/SAPP and ERP systems.

  4. Methods for upgrading of a fuel gas and succinic acid production

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention provides methods of upgrading of a CO2-containing fuel gas comprising the use of anaerobic succinic acid-producing microorganisms. Thus, the present invention provides a method for simultaneous upgrading of a CO2-containing fuel gas and biosuccinic acid production....

  5. Methods for producing extracted and digested products from pretreated lignocellulosic biomass

    Energy Technology Data Exchange (ETDEWEB)

    Chundawat, Shishir; Sousa, Leonardo Da Costa; Cheh, Albert M.; Balan; , Venkatesh; Dale, Bruce

    2017-05-16

    Methods for producing extracted and digested products from pretreated lignocellulosic biomass are provided. The methods include converting native cellulose I.sub..beta. to cellulose III.sub.I by pretreating the lignocellulosic biomass with liquid ammonia under certain conditions, and performing extracting or digesting steps on the pretreated/converted lignocellulosic biomass.

  6. The Calculation Methods of the Specific Fuel Rate in Combined Heat and Electricity Production

    Directory of Open Access Journals (Sweden)

    I. A. Chuchueva

    2016-01-01

    Full Text Available The paper discusses a specific fuel rate in combined heat and electricity production using CHP technology. There are two objectives for calculation of specific fuel rate: a CHP technical efficiency estimate, b increasing CHP competitiveness at electricity and district heat markets. Currently, development of a number of thermo-dynamical methods of calculation solves the first problem while to solve the second one there is a number of developed economical methods of calculation. In Russia despite a decade of the wholesale electricity market progress the CHP market offers are still tightly connected with technical efficiency rate. To estimate the technical efficiency rate is widely used the least effective thermo-dynamical method – so called “physical” method”. The paper formulates a problem statement that is the specific fuel rate calculation and reviews the most widely applied methods. The review consists of two parts: in the first the Russian methods are discussed, and in the second one the methods widely used in the countries with highly developed electricity and district heat markets. A new thermo-dynamical method to calculate the specific fuel rate is introduced, which uses the linear characteristic curves of a steam turbine. The developed method allows us to take into consideration the energy inequality of the CHP products. Another advantages of this new method are calculation simplicity and small number of input data. To compare the effectiveness of different methods were introduced comparison rules and also calculations were performed. The comparison of thermo-dynamical methods shows that the most effective methods are an exergy method and also the method that takes into consideration the reduced generation of electricity (work method. Calculation complexity and large number of input data are main disadvantages of these methods. The comparison of economical methods shows that the most effective from stated point of view are a

  7. Validated stability indicating methods for determination of nitazoxanide in presence of its degradation products*

    Science.gov (United States)

    Ali, Nouruddin W.; Abbas, Samah Sayed; Zaazaa, Hala El-Sayed; Abdelrahman, Maha Mohamed; Abdelkawy, Mohamed

    2011-01-01

    Three sensitive, selective and reproducible stability-indicating methods are presented for determination of nitazoxanide (NTZ), a new anti-protozoal drug, in presence of its degradation products. Method A utilizes the first derivative of ratio spectra spectrophotometry by measurement of the amplitude at 364.4 nm using one of the degradation products as a divisor. Method B is a chemometric-assisted spectrophotometry, where principal component regression (PCR) and partial least squares (PLS) were applied. These two approaches were successfully applied to quantify NTZ in presence of degradation products using the information included in the absorption spectra in the range 260–360 nm. Method C is based on the separation of NTZ from its degradation products followed by densitometric measurement of the bands at 254 nm. The separation was carried out on silica gel 60F254, using chloroform–methanol–ammonia solution–glacial acetic acid (95:5:1:1 by volume, pH=5.80) as a developing system. These methods are suitable as stability-indicating methods for the determination of NTZ in presence of its degradation products either in bulk powder or in pharmaceutical formulations. Statistical analysis of the results has been carried out revealing high accuracy and good precision. PMID:29403729

  8. Using a fuzzy comprehensive evaluation method to determine product usability: A proposed theoretical framework.

    Science.gov (United States)

    Zhou, Ronggang; Chan, Alan H S

    2017-01-01

    In order to compare existing usability data to ideal goals or to that for other products, usability practitioners have tried to develop a framework for deriving an integrated metric. However, most current usability methods with this aim rely heavily on human judgment about the various attributes of a product, but often fail to take into account of the inherent uncertainties in these judgments in the evaluation process. This paper presents a universal method of usability evaluation by combining the analytic hierarchical process (AHP) and the fuzzy evaluation method. By integrating multiple sources of uncertain information during product usability evaluation, the method proposed here aims to derive an index that is structured hierarchically in terms of the three usability components of effectiveness, efficiency, and user satisfaction of a product. With consideration of the theoretical basis of fuzzy evaluation, a two-layer comprehensive evaluation index was first constructed. After the membership functions were determined by an expert panel, the evaluation appraisals were computed by using the fuzzy comprehensive evaluation technique model to characterize fuzzy human judgments. Then with the use of AHP, the weights of usability components were elicited from these experts. Compared to traditional usability evaluation methods, the major strength of the fuzzy method is that it captures the fuzziness and uncertainties in human judgments and provides an integrated framework that combines the vague judgments from multiple stages of a product evaluation process.

  9. Evaluation Acreage, Production and Yield of Wheat (T. aestivum L. by Krigging Method in Turkey

    Directory of Open Access Journals (Sweden)

    Murat Olgun

    2013-04-01

    Full Text Available The purpose of this study was to reveal similarities and dissimilarities of provinces and to determine the potential of provinces on wheat in terms of for acreage, production and yield by using krigging method in Turkey. Wheat is the most important and strategic crop for Turkey and plays important a role in crop production, food industry and animal husbandry whether it is given greater importance in production marketing and valorization. Results revealed that, significant relationships appear between acreage, production and crop yield. Besides, climatic, topographic and soil conditions are very significant factors in determining acreage, yield and production of wheat. The use of cultivars having higher yield, more tolerance to drought cold, and have a shorter growing period allowing rapid development will increase crop, yield therefore acreage and production.

  10. Method for the preparation of metal colloids in inverse micelles and product preferred by the method

    Science.gov (United States)

    Wilcoxon, Jess P.

    1992-01-01

    A method is provided for preparing catalytic elemental metal colloidal particles (e.g. gold, palladium, silver, rhodium, iridium, nickel, iron, platinum, molybdenum) or colloidal alloy particles (silver/iridium or platinum/gold). A homogeneous inverse micelle solution of a metal salt is first formed in a metal-salt solvent comprised of a surfactant (e.g. a nonionic or cationic surfactant) and an organic solvent. The size and number of inverse micelles is controlled by the proportions of the surfactant and the solvent. Then, the metal salt is reduced (by chemical reduction or by a pulsed or continuous wave UV laser) to colloidal particles of elemental metal. After their formation, the colloidal metal particles can be stabilized by reaction with materials that permanently add surface stabilizing groups to the surface of the colloidal metal particles. The sizes of the colloidal elemental metal particles and their size distribution is determined by the size and number of the inverse micelles. A second salt can be added with further reduction to form the colloidal alloy particles. After the colloidal elemental metal particles are formed, the homogeneous solution distributes to two phases, one phase rich in colloidal elemental metal particles and the other phase rich in surfactant. The colloidal elemental metal particles from one phase can be dried to form a powder useful as a catalyst. Surfactant can be recovered and recycled from the phase rich in surfactant.

  11. Method for assessing the impact of emission gasses on physiology and productivity in biological methanogenesis.

    Science.gov (United States)

    Seifert, A H; Rittmann, S; Bernacchi, S; Herwig, C

    2013-05-01

    This contribution presents a method for quantification of the impact of emission gasses on the methane production with hydrogenotrophic methanogenic archaea. The developed method allows a robust quantification of the influence of real gasses on the volumetric productivity of methanogenic cultures by uncoupling physiological and mass transfer effects. This is achieved over reference experiments with pure H2 and CO2, simulating the mass transfer influence of the non-convertible side components by addition of N2 to the reactant stream. Furthermore, this method was used to examine the performance of Methanothermobacter marburgensis on different emission gasses. None of the present side components had a negative effect on the volumetric methane production rate. The presented method showed to be ready to use as a generic tool for feasibility studies and quantification of the physiological impact regarding the use of exhaust gasses as reactant gas for the biological methanogenesis. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Effectiveness of creative and productive instructional method towards students' learning achievement in steel structure course

    Science.gov (United States)

    Sugiyanto, Pribadi, Supriyanto, Bambang

    2017-09-01

    The purpose of this study was to investigate the effectiveness of Creative & Productive instructional method compared with conventional method. This research was a quasi-experimental study involving all Civil Engineering students at Universitas Negeri Malang who were taking a course of Steel Structure. The students were randomly assigned to two different treatment groups, 30 students in experimental group and 37 students in the control group. It was assumed that these groups were equal in all relevant aspects; they differed only in the treatment administered. We used the t-test to test the hypothesis. The results of this research suggest that: (l) the use of Creative & Productive instructional method can significantly improve students' learning achievement, (2) the use of Creative & Productive instructional method can significantly improve students' retention, (3) students' motivation has a significant effect on their learning achievement, and (4) students' motivation has a significant effect on their retention.

  13. Product Design Improvement Using Human-Computer Interaction Method Based on Modal Analysis

    Directory of Open Access Journals (Sweden)

    Liu Lei

    2016-01-01

    Full Text Available A new kind of product design improvement method was proposed, which was mainly based on modal analysis using human-computer interactive way. And it was used in design improvement of an aerospace assembly to verify the effectiveness. The method made full use of the advantages of human and computer in product design and the work was mainly focused on modal analysis by computer and structure modification by human-computer interaction method. The final design got a better solution than the initial design as the results showed that the base frequency increased by 34.7% from 43.2Hz to 58.2Hz after design improvement and the vibration feature improved a lot. Also the experimental results were close to the simulation results with the relative error was 2.5%. The human-computer method can save cost and time and can provide a reference for other design of new products at the same time.

  14. Conventional and modified hydrodistillation method for the extraction of glucosinolate hydrolytic products: a comparative account.

    Science.gov (United States)

    Arora, Rohit; Singh, Bikram; Vig, Adarsh Pal; Arora, Saroj

    2016-01-01

    Eruca sativa is extensively used as raw and its oil is also used for cooking due to its exceptional flavour. The volatile nature of the hydrolytic products of glucosinolates makes the extraction difficult. The hydrodistillation method used previously yield very less amount of the extract as well as the absence of stirring in the round bottom flask causes burning of both the crushed seeds and the flask. To overcome these drawbacks, a method has been developed using magnetic stirrer and hot plate. The yield and composition of hydrolytic products in the extract with the modified method was increased along with an increase in the amount of major hydrolytic products as seen by GC-MS. This method thus has immense potential in pharmaceutical industries, due to the ease of extraction and isolation.

  15. Communication methods and production techniques in fixed prosthesis fabrication: a UK based survey. Part 2: Production techniques

    Science.gov (United States)

    Berry, J.; Nesbit, M.; Saberi, S.; Petridis, H.

    2014-01-01

    Aim The aim of this study was to identify the communication methods and production techniques used by dentists and dental technicians for the fabrication of fixed prostheses within the UK from the dental technicians' perspective. This second paper reports on the production techniques utilised. Materials and methods Seven hundred and eighty-two online questionnaires were distributed to the Dental Laboratories Association membership and included a broad range of topics, such as demographics, impression disinfection and suitability, and various production techniques. Settings were managed in order to ensure anonymity of respondents. Statistical analysis was undertaken to test the influence of various demographic variables such as the source of information, the location, and the size of the dental laboratory. Results The number of completed responses totalled 248 (32% response rate). Ninety percent of the respondents were based in England and the majority of dental laboratories were categorised as small sized (working with up to 25 dentists). Concerns were raised regarding inadequate disinfection protocols between dentists and dental laboratories and the poor quality of master impressions. Full arch plastic trays were the most popular impression tray used by dentists in the fabrication of crowns (61%) and bridgework (68%). The majority (89%) of jaw registration records were considered inaccurate. Forty-four percent of dental laboratories preferred using semi-adjustable articulators. Axial and occlusal under-preparation of abutment teeth was reported as an issue in about 25% of cases. Base metal alloy was the most (52%) commonly used alloy material. Metal-ceramic crowns were the most popular choice for anterior (69%) and posterior (70%) cases. The various factors considered did not have any statistically significant effect on the answers provided. The only notable exception was the fact that more methods of communicating the size and shape of crowns were utilised for

  16. A QFD-based optimization method for a scalable product platform

    Science.gov (United States)

    Luo, Xinggang; Tang, Jiafu; Kwong, C. K.

    2010-02-01

    In order to incorporate the customer into the early phase of the product development cycle and to better satisfy customers' requirements, this article adopts quality function deployment (QFD) for optimal design of a scalable product platform. A five-step QFD-based method is proposed to determine the optimal values for platform engineering characteristics (ECs) and non-platform ECs of the products within a product family. First of all, the houses of quality (HoQs) for all product variants are developed and a QFD-based optimization approach is used to determine the optimal ECs for each product variant. Sensitivity analysis is performed for each EC with respect to overall customer satisfaction (OCS). Based on the obtained sensitivity indices of ECs, a mathematical model is established to simultaneously optimize the values of the platform and the non-platform ECs. Finally, by comparing and analysing the optimal solutions with different number of platform ECs, the ECs with which the worst OCS loss can be avoided are selected as platform ECs. An illustrative example is used to demonstrate the feasibility of this method. A comparison between the proposed method and a two-step approach is conducted on the example. The comparison shows that, as a kind of single-stage approach, the proposed method yields better average degree of customer satisfaction due to the simultaneous optimization of platform and non-platform ECs.

  17. Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

    Science.gov (United States)

    Zhou, Ronggang; Chan, Alan H S

    2017-01-01

    In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

  18. Study of the Assessment Method for N Excretion in Sustainable Heavy Pigs Production

    Science.gov (United States)

    Guo, Kaijun; Liu, Fenghua; Xu, Xiaolong; Xu, Jianqin; Zoccarato, Ivo

    Italian heavy pigs, with an average slaughtering body weight of 150-170 kg, are world-wide famous for its Parma ham production. Because the requirement of market diversity, producers are interested in ham production following the procedure of Italian pork industry. However, with ever growing public concern about nitrogen (N) pollution in the environment, it is necessary to determine a suitable method to measure N excretion from heavy pig production. The N retention was calculated by factorial method and compared with estimations of other methods available in literature. The results showed that the N percentage of heavy pigs is 2.43% ± 0.07% on body weight basis and the percentage of N excretion was approximately 69.62% ± 0.20 of N intake. Regarding the N excretion of estimation methods, the proposal of Xiccato et al. was closer to reality of the heavy pig production than other methods and could be used as a standard way to calculate the N excretion. Besides the overall standard, it is opportune to make a N balance sheet for every individual farm under specific conditions. Only in this way, the farmers can realize their deficiencies and will voluntarily follow the Good Management Practice (GMP) indications so as to guarantee a sustainable development of pig production.

  19. The need for an established allocation method when assessing absolute sustainability on a product level

    DEFF Research Database (Denmark)

    Ryberg, Morten; Owsianiak, Mikolaj; Hauschild, Michael Zwicky

    2015-01-01

    ? If we assess the life cycle and relate the impact scores to the remaining capacity available for impacts, there is a risk that all products are seen absolutely sustainable. In addition, how should we decide on who can use the remaining capacity? To address these issues an allocation method is proposed......Assessment of absolute sustainability within life cycle assessment (LCA) framework is operational on the country scale. However, it is difficult to apply the existing approaches to products, which are typically the scope of LCAs. How should we assess whether a chair is (absolutely) sustainable...... allocation keys specific to each product group, e.g. mass for furniture, or economic revenue for IT. The proposed method facilitates assessment of absolute sustainability of products within the LCA framework....

  20. Comparison of several methods for the extraction of DNA from potatoes and potato-derived products.

    Science.gov (United States)

    Smith, Donna S; Maxwell, Philip W; De Boer, Solke H

    2005-12-28

    Eight methods were compared for the extraction of DNA from raw potato tubers, and nine methods were evaluated for the extraction of DNA from dehydrated potato slices, potato flakes, potato flour, potato starch, and two ready-to-eat potato snack foods. Extracts were assessed for yield using a fluorescence-based DNA quantification assay. Real-time amplification of an endogenous gene, sucrose synthase (sus), was used to assess extract and template quality. A CTAB-based method extracted the highest DNA yields from the tuber material. An in-house method, which utilized the Kingfisher magnetic particle processor, yielded the highest template quality from the tubers. For most of the tuber samples, the Kingfisher and CTAB methods recovered the highest levels of amplifiable sus. DNA yields for potato-derived foods generally decreased with the extent that the product had been processed. The methods that utilized the magnetic particle processor delivered the highest template quality from one of the snack products that was particularly high in fat. For most of the remaining processed products, the levels of amplifiable target DNA recovered were roughly correlated with total DNA recovery, indicating that overall yield had greater influence over sus amplification than template quality. The Wizard method was generally the best method for the extraction of DNA from most of the potato-derived foods.

  1. Comparison of different methods to quantify fat classes in bakery products.

    Science.gov (United States)

    Shin, Jae-Min; Hwang, Young-Ok; Tu, Ock-Ju; Jo, Han-Bin; Kim, Jung-Hun; Chae, Young-Zoo; Rhu, Kyung-Hun; Park, Seung-Kook

    2013-01-15

    The definition of fat differs in different countries; thus whether fat is listed on food labels depends on the country. Some countries list crude fat content in the 'Fat' section on the food label, whereas other countries list total fat. In this study, three methods were used for determining fat classes and content in bakery products: the Folch method, the automated Soxhlet method, and the AOAC 996.06 method. The results using these methods were compared. Fat (crude) extracted by the Folch and Soxhlet methods was gravimetrically determined and assessed by fat class using capillary gas chromatography (GC). In most samples, fat (total) content determined by the AOAC 996.06 method was lower than the fat (crude) content determined by the Folch or automated Soxhlet methods. Furthermore, monounsaturated fat or saturated fat content determined by the AOAC 996.06 method was lowest. Almost no difference was observed between fat (crude) content determined by the Folch method and that determined by the automated Soxhlet method for nearly all samples. In three samples (wheat biscuits, butter cookies-1, and chocolate chip cookies), monounsaturated fat, saturated fat, and trans fat content obtained by the automated Soxhlet method was higher than that obtained by the Folch method. The polyunsaturated fat content obtained by the automated Soxhlet method was not higher than that obtained by the Folch method in any sample. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. Modelling of Risk Management for Product Development of Yogurt Drink Using House of Risk (HOR Method

    Directory of Open Access Journals (Sweden)

    Nur Eko Wahyudin

    2016-12-01

    Full Text Available Abstract. Product Development is essential for the company to stay steady or advance in the market competition. However, the main challenge in product development is associated with the uncertaincy risks that may appeared during the design process. Such risks may affect the success rate of the product development and may contribute either to a small or a huge loss, in which the sustainability of the company can also be affected. To mitigate the risks in product development, risk management is critical. CV. XYZ is a company producing dairy-based products such as mozzarella cheese and yogurt. This research is aimed to identify the potential appeared risks, to arrange the priority order of risk agents and to conceptualize the risk mitigation strategy to be applied. A Yogurt drink product development is needed by CV. XYZ to support the company goals of the product and market expansion. House of Risk (HOR method was used in this research. Two phases included in the identification process, namely marketing and product development design. The research results have examined 20 risks with 27 identified risk agents. Using the Aggregate Risk Potential (ARP value, and Pareto 80:20 principal, this study provides a strategic guideline as how to mitigate the top-three identified risk agents. Keywords: House of Risk (HOR, Risk Management, Product Development, Yogurt Drink

  3. Risk Assessment at the Cosmetic Product Manufacturer by Expert Judgment Method

    Science.gov (United States)

    Vtorushina, A. N.; Larionova, E. V.; Mezenceva, I. L.; Nikonova, E. D.

    2017-05-01

    A case study was performed in a cosmetic product manufacturer. We have identified the main risk factors of occupational accidents and their causes. Risk of accidents is assessed by the expert judgment method. Event tree for the most probable accident is built and recommendations on improvement of occupational health and safety protection system at the cosmetic product manufacturer are developed. The results of this paper can be used to develop actions to improve the occupational safety and health system in the chemical industry.

  4. Culture Condition Improvement for Phytase Production in Solid State Fermentation by Aspergillus ficuum Using Statistical Method

    OpenAIRE

    Jafari-Tapeh, H.; Z. Hamidi-Esfahani; Azizi, M. H.

    2012-01-01

    The effective factors on phytase production by Aspergillus ficuum PTCC 5288 were studied using solid-state fermentation method in 250 ml shake flask. The effective process parameters on phytase production were identified using Plackett-Burman design. Four factors were identified of different variables, including glucose, moisture, MgSO4, and fermentation time, which were the most significant. The optimum levels of these significant parameters were determined through response surface methodolo...

  5. STUDY OF STATIC ELECTRICITY CHARGE ACCUMULATION ON SURFACE OF FLUOROPOLYMER-4 PRODUCTS USING VIBRATING CAPACITOR METHOD

    Directory of Open Access Journals (Sweden)

    H. Vershina

    2012-01-01

    Full Text Available The paper presents investigations of processes pertaining to surface charge accumulation and running of fluoropolymer-4 products using vibrating capacitor method. Modification of a measurement technique allowing to register distribution of dielectric surface potential without disturbance of the surface charged state has been described in the paper. The paper contains graphics of spatial distribution of surface potential of fluoropolymer-4 products after various treatments. The paper reveals that thermal treatment (tempering reduces static characteristics of fluoropolymer-4.

  6. Integrated Rig for the Production of Boron Nitride Nanotubes via the Pressurized Vapor-Condenser Method

    Science.gov (United States)

    Smith, Michael W. (Inventor); Jordan, Kevin C. (Inventor)

    2014-01-01

    An integrated production apparatus for production of boron nitride nanotubes via the pressure vapor-condenser method. The apparatus comprises: a pressurized reaction chamber containing a continuously fed boron containing target having a boron target tip, a source of pressurized nitrogen and a moving belt condenser apparatus; a hutch chamber proximate the pressurized reaction chamber containing a target feed system and a laser beam and optics.

  7. Methods of Computational Intelligence in the Context of Quality Assurance in Foundry Products

    Directory of Open Access Journals (Sweden)

    Rojek G.

    2016-06-01

    Full Text Available One way to ensure the required technical characteristics of castings is the strict control of production parameters affecting the quality of the finished products. If the production process is improperly configured, the resulting defects in castings lead to huge losses. Therefore, from the point of view of economics, it is advisable to use the methods of computational intelligence in the field of quality assurance and adjustment of parameters of future production. At the same time, the development of knowledge in the field of metallurgy, aimed to raise the technical level and efficiency of the manufacture of foundry products, should be followed by the development of information systems to support production processes in order to improve their effectiveness and compliance with the increasingly more stringent requirements of ergonomics, occupational safety, environmental protection and quality. This article is a presentation of artificial intelligence methods used in practical applications related to quality assurance. The problem of control of the production process involves the use of tools such as the induction of decision trees, fuzzy logic, rough set theory, artificial neural networks or case-based reasoning.

  8. Expanding clinical laboratory tobacco product evaluation methods to loose-leaf tobacco vaporizers.

    Science.gov (United States)

    Lopez, Alexa A; Hiler, Marzena; Maloney, Sarah; Eissenberg, Thomas; Breland, Alison B

    2016-12-01

    Novel tobacco products entering the US market include electronic cigarettes (ECIGs) and products advertised to "heat, not burn" tobacco. There is a growing literature regarding the acute effects of ECIGs. Less is known about "heat, not burn" products. This study's purpose was to expand existing clinical laboratory methods to examine, in cigarette smokers, the acute effects of a "heat, not burn" "loose-leaf tobacco vaporizer" (LLTV). Plasma nicotine and breath carbon monoxide (CO) concentration and tobacco abstinence symptom severity were measured before and after two 10-puff (30-s interpuff interval) product use bouts separated by 60min. LLTV effects were compared to participants' own brand (OB) cigarettes and an ECIG (3.3V; 1.5ohm; 18mg/ml nicotine). Relative to OB, LLTV increased plasma nicotine concentration to a lesser degree, did not increase CO, and did not appear to reduce abstinence symptoms as effectively. Relative to ECIG, LLTV nicotine and CO delivery and abstinence symptom suppression did not differ. Participants reported that both the LLTV and ECIG were significantly less satisfying than OB. Results demonstrate that LLTVs are capable of delivering nicotine and suppressing tobacco abstinence symptoms partially; acute effects of these products can be evaluated using existing clinical laboratory methods. Results can inform tobacco product regulation and may be predictive of the extent that these products have the potential to benefit or harm overall public health. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  9. Development of analytical method for determination of 1,4-dioxane in cleansing products.

    Science.gov (United States)

    Tahara, M; Obama, T; Ikarashi, Y

    2013-12-01

    1,4-Dioxane is a toxic by-product formed during the synthesis of surfactants used in finished cosmetic products. There are no set permissible levels of toxic impurities in finished cosmetic products in Japan. In this study, we have established a simple and sufficiently precise analytical method to determine the activity of 1,4-dioxane in finished cosmetic cleansing products. This method involves the standard addition approach and headspace-gas chromatography/mass spectrometry without pre-conditioning. Fifteen cleansing products that are sold in the Japanese market, such as shampoo, hand soap, and dishwashing liquid, were analyzed, and 1,4-dioxane was detected at a concentration of a few micrograms per gram of the product in almost all of them. The concentration of 1,4-dioxane in two dishwashing liquid products was high. The maximum concentration of 1,4-dioxane in all of the cleansing products was below 10 μg g(-1) , which is a limit that is thought to be safe and technically achievable through the application of good manufacturing practices. Since 1,4-dioxane is formed during the synthesis of polyoxyethylene ether sulfate, it was detected at high concentrations in cleansing products that contained a lot of polyoxyethylene ether sulfate. Control of the synthesis of polyoxyethylene ether sulfate can be effective in reducing the concentration of 1,4-dioxane in cleansing products. © 2013 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  10. Spectral Method with the Tensor-Product Nodal Basis for the Steklov Eigenvalue Problem

    Directory of Open Access Journals (Sweden)

    Xuqing Zhang

    2013-01-01

    Full Text Available This paper discusses spectral method with the tensor-product nodal basis at the Legendre-Gauss-Lobatto points for solving the Steklov eigenvalue problem. A priori error estimates of spectral method are discussed, and based on the work of Melenk and Wohlmuth (2001, a posterior error estimator of the residual type is given and analyzed. In addition, this paper combines the shifted-inverse iterative method and spectral method to establish an efficient scheme. Finally, numerical experiments with MATLAB program are reported.

  11. A review of studies applying environmental impact assessment methods on fruit production systems.

    Science.gov (United States)

    Cerutti, Alessandro K; Bruun, Sander; Beccaro, Gabriele L; Bounous, Giancarlo

    2011-10-01

    Although many aspects of environmental accounting methodologies in food production have already been investigated, the application of environmental indicators in the fruit sector is still rare and no consensus can be found on the preferred method. On the contrary, widely diverging approaches have been taken to several aspects of the analyses, such as data collection, handling of scaling issues, and goal and scope definition. This paper reviews studies assessing the sustainability or environmental impacts of fruit production under different conditions and identifies aspects of fruit production that are of environmental importance. Four environmental assessment methods which may be applied to assess fruit production systems are evaluated, namely Life Cycle Assessment, Ecological Footprint Analysis, Emergy Analysis and Energy Balance. In the 22 peer-reviewed journal articles and two conference articles applying one of these methods in the fruit sector that were included in this review, a total of 26 applications of environmental impact assessment methods are described. These applications differ concerning e.g. overall objective, set of environmental issues considered, definition of system boundaries and calculation algorithms. Due to the relatively high variability in study cases and approaches, it was not possible to identify any one method as being better than the others. However, remarks on methodologies and suggestions for standardisation are given and the environmental burdens of fruit systems are highlighted. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. A novel culture method for high level production of heterologous protein in Saccharomyces cerevisiae.

    Science.gov (United States)

    Nagashima, T; Yamamoto, Y; Gomi, K; Kitamoto, K; Kumagai, C

    1994-07-01

    A high level production system for heterologous protein by cold culture of yeast transformants at 15 degrees C was developed. The yeast transformants, carrying a plasmid containing cDNA for Aspergillus oryzae alpha-amylase (Taka-amylase A) or human lysozyme synthetic DNA, were cultivated in a selective medium for 1 or 2 days until full growth at 30 degrees C. The yeast cells were harvested by centrifugation from the culture fluid and then were transferred to YPD medium. These inoculated broths were incubated for 2 days at 15 degrees C and then for another 2 days at 30 degrees C. By the cold culture method described above, higher amounts of Taka-amylase A (28.6 mg/liter) and human lysozyme (6.1 mg/liter) were produced by the yeast transformants compared to those by conventional methods. Heterologous protein productions using YEp, YCp, and YIp types of yeast expression vectors with ADH1 or GAPDH promoter by the cold culture method showed effective productivity of about 2-fold compared to those by the conventional method of culture at 30 degrees C. The high level production of heterologous protein by this method was not specific to the S. cerevisiae strains examined.

  13. High Order Adjoint Derivatives using ESDIRK Methods for Oil Reservoir Production Optimization

    DEFF Research Database (Denmark)

    Capolei, Andrea; Stenby, Erling Halfdan; Jørgensen, John Bagterp

    2012-01-01

    In production optimization, computation of the gradients is the computationally expensive step. We improve the computational efficiency of such algorithms by improving the gradient computation using high-order ESDIRK (Explicit Singly Diagonally Implicit Runge-Kutta) temporal integration methods...... and continuous adjoints . The high order integration scheme allows larger time steps and therefore faster solution times. We compare gradient computation by the continuous adjoint method to the discrete adjoint method and the finite-difference method. The methods are implemented for a two phase flow reservoir...... the time steps are controlled in a certain range, the continuous adjoint method produces gradients sufficiently accurate for the optimization algorithm and somewhat faster than the discrete adjoint method....

  14. DEVELOPMENT OF A METHOD STATISTICAL ANALYSIS ACCURACY AND PROCESS STABILITY PRODUCTION OF EPOXY RESIN ED-20

    Directory of Open Access Journals (Sweden)

    N. V. Zhelninskaya

    2015-01-01

    Full Text Available Statistical methods play an important role in the objective evaluation of quantitative and qualitative characteristics of the process and are one of the most important elements of the quality assurance system production and total quality management process. To produce a quality product, one must know the real accuracy of existing equipment, to determine compliance with the accuracy of a selected technological process specified accuracy products, assess process stability. Most of the random events in life, particularly in manufacturing and scientific research, are characterized by the presence of a large number of random factors, is described by a normal distribution, which is the main in many practical studies. Modern statistical methods is quite difficult to grasp and wide practical use without in-depth mathematical training of all participants in the process. When we know the distribution of a random variable, you can get all the features of this batch of products, to determine the mean value and the variance. Using statistical control methods and quality control in the analysis of accuracy and stability of the technological process of production of epoxy resin ED20. Estimated numerical characteristics of the law of distribution of controlled parameters and determined the percentage of defects of the investigated object products. For sustainability assessment of manufacturing process of epoxy resin ED-20 selected Shewhart control charts, using quantitative data, maps of individual values of X and sliding scale R. Using Pareto charts identify the causes that affect low dynamic viscosity in the largest extent. For the analysis of low values of dynamic viscosity were the causes of defects using Ishikawa diagrams, which shows the most typical factors of the variability of the results of the process. To resolve the problem, it is recommended to modify the polymer composition of carbon fullerenes and to use the developed method for the production of

  15. Life Cycle Assessment and Water Footprint of Hydrogen Production Methods: From Conventional to Emerging Technologies

    Directory of Open Access Journals (Sweden)

    Andi Mehmeti

    2018-02-01

    Full Text Available A common sustainability issue, arising in production systems, is the efficient use of resources for providing goods or services. With the increased interest in a hydrogen (H2 economy, the life-cycle environmental performance of H2 production has special significance for assisting in identifying opportunities to improve environmental performance and to guide challenging decisions and select between technology paths. Life cycle impact assessment methods are rapidly evolving to analyze multiple environmental impacts of the production of products or processes. This study marks the first step in developing process-based streamlined life cycle analysis (LCA of several H2 production pathways combining life cycle impacts at the midpoint (17 problem-oriented and endpoint (3 damage-oriented levels using the state-of-the-art impact assessment method ReCiPe 2016. Steam reforming of natural gas, coal gasification, water electrolysis via proton exchange membrane fuel cell (PEM, solid oxide electrolyzer cell (SOEC, biomass gasification and reforming, and dark fermentation of lignocellulosic biomass were analyzed. An innovative aspect is developed in this study is an analysis of water consumption associated with H2 production pathways by life-cycle stage to provide a better understanding of the life cycle water-related impacts on human health and natural environment. For water-related scope, Water scarcity footprint (WSF quantified using Available WAter REmaining (AWARE method was applied as a stand-alone indicator. The paper discusses the strengths and weaknesses of each production pathway, identify the drivers of environmental impact, quantify midpoint environmental impact and its influence on the endpoint environmental performance. The findings of this study could serve as a useful theoretical reference and practical basis to decision-makers of potential environmental impacts of H2 production systems.

  16. Evaluation of two methods of estimating larval habitat productivity in western Kenya highlands

    Directory of Open Access Journals (Sweden)

    Munga Stephen

    2011-06-01

    Full Text Available Abstract Background Malaria vector intervention and control programs require reliable and accurate information about vector abundance and their seasonal distribution. The availability of reliable information on the spatial and temporal productivity of larval vector habitats can improve targeting of larval control interventions and our understanding of local malaria transmission and epidemics. The main objective of this study was to evaluate two methods of estimating larval habitat productivity in the western Kenyan highlands, the aerial sampler and the emergence trap. Methods The study was conducted during the dry and rainy seasons in 2008, 2009 and 2010. Aerial samplers and emergence traps were set up for sixty days in each season in three habitat types: drainage ditches, natural swamps, and abandoned goldmines. Aerial samplers and emergence traps were set up in eleven places in each habitat type. The success of each in estimating habitat productivity was assessed according to method, habitat type, and season. The effect of other factors including algae cover, grass cover, habitat depth and width, and habitat water volume on species productivity was analysed using stepwise logistic regression Results Habitat productivity estimates obtained by the two sampling methods differed significantly for all species except for An. implexus. For for An. gambiae s.l. and An. funestus, aerial samplers performed better, 21.5 and 14.6 folds, than emergence trap respectively, while the emergence trap was shown to be more efficient for culicine species. Seasonality had a significant influence on the productivity of all species monitored. Dry season was most productive season. Overall, drainage ditches had significantly higher productivity in all seasons compared to other habitat types. Algae cover, debris, chlorophyll-a, and habitat depth and size had significant influence with respect to species. Conclusion These findings suggest that the aerial sampler is the

  17. Analytical methods for gelatin differentiation from bovine and porcine origins and food products.

    Science.gov (United States)

    Nhari, Raja Mohd Hafidz Raja; Ismail, Amin; Che Man, Yaakob B

    2012-01-01

    Usage of gelatin in food products has been widely debated for several years, which is about the source of gelatin that has been used, religion, and health. As an impact, various analytical methods have been introduced and developed to differentiate gelatin whether it is made from porcine or bovine sources. The analytical methods comprise a diverse range of equipment and techniques including spectroscopy, chemical precipitation, chromatography, and immunochemical. Each technique can differentiate gelatins for certain extent with advantages and limitations. This review is focused on overview of the analytical methods available for differentiation of bovine and porcine gelatin and gelatin in food products so that new method development can be established. © 2011 Institute of Food Technologists®

  18. A Novel Aeration Method for the Preparation of Algae (Dunaliella Salina) Biomass for Biofuel Production.

    OpenAIRE

    U.O. Enwereuzoh; G. N. Onyeagoro

    2014-01-01

    Preparation of algae (Dunaliela Salina) biomass in ammonia (NH4 + ) and nitrate (NO3 - ) growth media for biofuel production was investigated, with special attention on the elimination of inhibitory oxygen that adversely affects algae growth. A novel aeration method based on high and efficient transfer of carbon dioxide (CO2) required to stabilize the CO2 of the algae growth medium in a short time was adopted for the elimination of the inhibitory oxygen. The novel aeration method was found...

  19. The possibilites of coal seam underground excavation in Republic of Macedonia with high productive excavation methods

    OpenAIRE

    Despodov, Zoran; Doneva, Nikolinka; Mijalkovski, Stojance

    2008-01-01

    The paper presents mining and geology properties of coal deposits in R.Macedonia predetermined for underground exploitation. Also it will be shown the way of coal seams preparation and development for underground excavation with longwall mining methods. Based on mining and geology properties of coal and it’s caloric value it will be observed the possibilities for application on the longwall mining which is among excavation methods with highest production and capacity applied in the contemp...

  20. A convenient method for rapid determination of proteins in rices and rice products

    OpenAIRE

    光永, 俊郎; 安藤, ひとみ

    1990-01-01

    [Author abstract]In the biuret determination of protein in rices and rice products, starch and lipids extractable with an alkaline solution such as biuret reagent were found to interfere with the biuret method. Comparative evaluation of their effects revealed that starch, a major component of rice, has the most significant effect on the biuret method. In the presence of starch, the correlation between Kjeldahl protein and the optical density of biuret was poor. It was found that several perha...

  1. Analysis of standard and innovative methods for allocating upstream and refinery GHG emissions to oil products

    OpenAIRE

    MORETTI CHRISTIAN; MORO ALBERTO; EDWARDS ROBERT; ROCCO MATTEO VINCENZO; COLOMBO EMANUELA

    2016-01-01

    Alternative fuel policies need accurate and transparent methods to find the embedded carbon intensity of individual refinery products. This study investigates different ways of allocating greenhouse gases emissions deriving from refining and upstream crude oil supply. Allocation methods based on mass, energy content, economic value and, innovatively, added-value, are compared with the marginal refining emissions calculated by CONCAWE’s linear-programming model to the average EU refinery, whic...

  2. Detection of native starches in meat products using histochemical Lugol Calleja method

    Directory of Open Access Journals (Sweden)

    Matej Pospiech

    2014-02-01

    Full Text Available Starch has been still used in food industry today as one of the main additives in foodstuffs. The reason for the use of starches in foodstuffs is their ability to bind water and to contribute to the coherent structure of the final product. However, the presence of starch in some foodstuffs is limited by legislation. These are especially meat products where legislation prohibits using starches. This study deals with determination of native starches using histochemical Lugol Calleja staining in meat products. The targeted structures of this successive staining are starches and collagen ligaments. Other structures can also be detected, based on the knowledge of their morphology. Within the scope of this study, the possibility of histochemical proof on the basis of reaction between Lugol's iodine solution and starch amylose was demonstrated. From the samples analyzed, the following criteria for the method were determined: Repeatability and repeatability of intralaboratory results was 100%, selectivity was determined to be 1.03, specificity of the method was determined to be 0.9, limit of detection was established to be 100% for 0.001 g.kg-1 of the addition, and 87.7% for the concentration of 0.0001 g.kg-1 of the starch addition. Based on the results it is obvious that the method is suitable for determination of native starches in meat products, and, in combination with staining of other foodstuffs ingredients, it gives a complex view of the composition and structure of the meat product.

  3. A surrogate method for comparison analysis of salivary concentrations of Xylitol-containing products

    Directory of Open Access Journals (Sweden)

    Zhou Lingmei

    2008-02-01

    Full Text Available Abstract Background Xylitol chewing gum has been shown to reduce Streptococcus mutans levels and decay. Two studies examined the presence and time course of salivary xylitol concentrations delivered via xylitol-containing pellet gum and compared them to other xylitol-containing products. Methods A within-subjects design was used for both studies. Study 1, adults (N = 15 received three xylitol-containing products (pellet gum (2.6 g, gummy bears (2.6 g, and commercially available stick gum (Koolerz, 3.0 g; Study 2, a second group of adults (N = 15 received three xylitol-containing products (pellet gum, gummy bears, and a 33% xylitol syrup (2.67 g. For both studies subjects consumed one xylitol product per visit with a 7-day washout between each product. A standardized protocol was followed for each product visit. Product order was randomly determined at the initial visit. Saliva samples (0.5 mL to 1.0 mL were collected at baseline and up to 10 time points (~16 min in length after product consumption initiated. Concentration of xylitol in saliva samples was analyzed using high-performance liquid chromatography. Area under the curve (AUC for determining the average xylitol concentration in saliva over the total sampling period was calculated for each product. Results In both studies all three xylitol products (Study 1: pellet gum, gummy bears, and stick gum; Study 2: pellet gum, gummy bears, and syrup had similar time curves with two xylitol concentration peaks during the sampling period. Study 1 had its highest mean peaks at the 4 min sampling point while Study 2 had its highest mean peaks between 13 to 16 minutes. Salivary xylitol levels returned to baseline at about 18 minutes for all forms tested. Additionally, for both studies the total AUC for the xylitol products were similar compared to the pellet gum (Study 1: pellet gum – 51.3 μg.min/mL, gummy bears – 59.6 μg.min/mL, and stick gum – 46.4 μg.min/mL; Study 2: pellet gum – 63.0

  4. A Method to Recover Useful Geothermal-Reservoir Parameters from Production Characteristic Curves (1) Steam Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Iglesias, E.; Arellano, V.; Garfias, A.; Miranda, C.; Hernandez, J.; Gonzalez, J.

    1983-12-15

    In this paper we develop and demonstrate a method to estimate the reservoir pressure and a productivity index for vertical steam wells, from its production characteristic (also called output) curves. In addition, the method allows to estimate the radius of influence of the well, provided that a value of the reservoir transmisivity is available. The basic structure of the present method is: first, the measured well head mass flowrates and pressures are transformed to downhole conditions by means of a numerical simulator; then, the computed downhole variables are fitted to a simple radial model that predicts the sandface flowrate in terms of the flowing pressure. For demonstration, the method was applied to several steam wells from the Los Azufres Geothermal field. We found excellent agreement of the model with this ample set of field data. As a bonus, the processed data allowed several inferences about the steam producing zone of the reservoir: that the wells considered produce from relatively isolated pockets of steam, which are probably fed by near-by inmobile water; and that these feed zones are in poor hydraulic communication with the field surface waters. our method are that it provides a way to retrieve important reservoir information from usually available production characteristic curves, and that the method works from easily and accurately taken wellhead measurements.

  5. Avocado oil extraction processes: method for cold-pressed high-quality edible oil production versus traditional production

    Directory of Open Access Journals (Sweden)

    Giacomo Costagli

    2015-10-01

    Full Text Available Nowadays the avocado fruit (Persea americana Mill. is widely regarded as an important fruit for its nutritional values, as it is rich in vital human nutrients. The avocado fruit is mainly sold fresh on the market, which however trades also a relevant quantity of second-grade fruits with a relatively high oil content. Traditionally, this oil is extracted from dried fruits by means of organic solvents, but a mechanical method is also used in general in locations where drying systems and/or solvent extraction units cannot be installed. These traditional processes yield a grade of oil that needs subsequent refining and is mainly used in the cosmetic industry. In the late 1990s, in New Zeland, a processing company with the collaboration of Alfa Laval began producing cold-pressed avocado oil (CPAO to be sold as edible oil for salads and cooking. Over the last fifteen years, CPAO production has increased in many other countries and has led to an expansion of the market which is set to continue, given the growing interest in highquality and healthy food. Avocado oil like olive oil is extracted from the fruit pulp and in particular shares many principles of the extraction process with extra-vergin olive oil. We conducted a review of traditional and modern extraction methods with particular focus on extraction processes and technology for CPAO production.

  6. Manufacturing Differences Affect Human Bone Marrow Stromal Cell Characteristics and Function: Comparison of Production Methods and Products from Multiple Centers.

    Science.gov (United States)

    Liu, Shutong; de Castro, Luis F; Jin, Ping; Civini, Sara; Ren, Jiaqiang; Reems, Jo-Anna; Cancelas, Jose; Nayak, Ramesh; Shaw, Georgina; O'Brien, Timothy; McKenna, David H; Armant, Myriam; Silberstein, Leslie; Gee, Adrian P; Hei, Derek J; Hematti, Peiman; Kuznetsov, Sergei A; Robey, Pamela G; Stroncek, David F

    2017-04-27

    Human bone marrow stromal cells (BMSCs, also known as bone marrow-derived mesenchymal stem cells) are manufactured using many different methods, but little is known about the spectrum of manufacturing methods used and their effects on BMSC characteristics and function. Seven centers using, and one developing, Good Manufacturing Practices (GMP) processes were surveyed as to their production methods. Among the seven centers, all used marrow aspirates as the starting material, but no two centers used the same manufacturing methods. Two to four BMSC lots from each center were compared using global gene expression. Among the twenty-four BMSC lots from the eight centers intra-center transcriptome variability was low and similar among centers. Principal component analysis and unsupervised hierarchical clustering analysis separated all the lots from five centers into five distinct clusters. BMSCs from six of the eight centers were tested for their ability to form bone and support hematopoiesis by in vivo transplantation (defining features of BMSCs). Those from all six centers tested formed bone, but the quantity formed was highly variable and BMSCs from only three centers supported hematopoiesis. These results show that differences in manufacturing resulted in variable BMSC characteristics including their ability to form bone and support hematopoiesis.

  7. Evaluation of two methods of estimating larval habitat productivity in western Kenya highlands.

    Science.gov (United States)

    Kweka, Eliningaya J; Zhou, Guofa; Lee, Ming-Chieh; Gilbreath, Thomas M; Mosha, Franklin; Munga, Stephen; Githeko, Andrew K; Yan, Guiyun

    2011-06-17

    Malaria vector intervention and control programs require reliable and accurate information about vector abundance and their seasonal distribution. The availability of reliable information on the spatial and temporal productivity of larval vector habitats can improve targeting of larval control interventions and our understanding of local malaria transmission and epidemics. The main objective of this study was to evaluate two methods of estimating larval habitat productivity in the western Kenyan highlands, the aerial sampler and the emergence trap. The study was conducted during the dry and rainy seasons in 2008, 2009 and 2010. Aerial samplers and emergence traps were set up for sixty days in each season in three habitat types: drainage ditches, natural swamps, and abandoned goldmines. Aerial samplers and emergence traps were set up in eleven places in each habitat type. The success of each in estimating habitat productivity was assessed according to method, habitat type, and season. The effect of other factors including algae cover, grass cover, habitat depth and width, and habitat water volume on species productivity was analysed using stepwise logistic regression Habitat productivity estimates obtained by the two sampling methods differed significantly for all species except for An. implexus. For for An. gambiae s.l. and An. funestus, aerial samplers performed better, 21.5 and 14.6 folds, than emergence trap respectively, while the emergence trap was shown to be more efficient for culicine species. Seasonality had a significant influence on the productivity of all species monitored. Dry season was most productive season. Overall, drainage ditches had significantly higher productivity in all seasons compared to other habitat types. Algae cover, debris, chlorophyll-a, and habitat depth and size had significant influence with respect to species. These findings suggest that the aerial sampler is the better of the two methods for estimating the productivity of An

  8. Optimization of the Vertical Bridgman Method and the Vertical Gradient Method for CdZnTe Single Crystal Production

    Directory of Open Access Journals (Sweden)

    A. Kalbáč

    2000-01-01

    Full Text Available In designing optimum parameters of advanced crystal growth techniques, computer modeling has become an important tool owing to the fact that computer simulation is much cheaper than many experimental techniques based on the trial and error method. In this paper, the application of computational modeling in the optimization of experimental setups for the production of CdZnTe single crystals from the melt is demonstrated on two characteristic examples, namely on the vertical Bridgman and vertical gradient method. The influence of adjustable parameters on the temperature, concentration and velocity fields, and on the positions and velocities of the moving interface is studied. Finally, the effect of uncertainty in material parameters on computed results is analyzed.

  9. Dimethyl carbonate as potential reactant in non-catalytic biodiesel production by supercritical method.

    Science.gov (United States)

    Ilham, Zul; Saka, Shiro

    2009-03-01

    In this study, the non-catalytic supercritical method has been studied in utilizing dimethyl carbonate. It was demonstrated that, the supercritical dimethyl carbonate process without any catalysts applied, converted triglycerides to fatty acid methyl esters with glycerol carbonate and citramalic acid as by-products, while free fatty acids were converted to fatty acid methyl esters with glyoxal. After 12 min of reaction at 350 degrees C/20 MPa, rapeseed oil treated with supercritical dimethyl carbonate reached 94% (w/w) yield of fatty acid methyl ester. The by-products from this process which are glycerol carbonate and citramalic acid are much higher in value than glycerol produced by the conventional process. In addition, the yield of the fatty acid methyl esters as biodiesel was almost at par with supercritical methanol method. Therefore, supercritical dimethyl carbonate process can be a good candidate as an alternative biodiesel production process.

  10. Computer Aided Methods & Tools for Separation & Purification of Fine Chemical & Pharmaceutical Products

    DEFF Research Database (Denmark)

    Afonso, Maria B.C.; Soni, Vipasha; Mitkowski, Piotr Tomasz

    2006-01-01

    An integrated approach that is particularly suitable for solving problems related to product-process design from the fine chemicals, agrochemicals, food and pharmaceutical industries is presented together with the corresponding methods and tools, which forms the basis for an integrated computer......, are presented....

  11. An Alternative Method for Computing Unit Costs and Productivity Ratios. AIR 1984 Annual Forum Paper.

    Science.gov (United States)

    Winstead, Wayland H.; And Others

    An alternative measure for evaluating the performance of academic departments was studied. A comparison was made with the traditional manner for computing unit costs and productivity ratios: prorating the salary and effort of each faculty member to each course level based on the personal mix of course taught. The alternative method used averaging…

  12. Methods for cost management during product development: A review and comparison of different literatures

    NARCIS (Netherlands)

    Wouters, M.; Morales, S.; Grollmuss, S.; Scheer, M.

    2016-01-01

    Purpose The paper provides an overview of research published in the innovation and operations management (IOM) literature on 15 methods for cost management in new product development, and it provides a comparison to an earlier review of the management accounting (MA) literature (Wouters & Morales,

  13. A Method for User Centering Systematic Product Development Aimed at Industrial Design Students

    Science.gov (United States)

    Coelho, Denis A.

    2010-01-01

    Instead of limiting the introduction and stimulus for new concept creation to lists of specifications, industrial design students seem to prefer to be encouraged by ideas in context. A new method that specifically tackles human activity to foster the creation of user centered concepts of new products was developed and is presented in this article.…

  14. The role of orbital products in the optimized effective potential method

    NARCIS (Netherlands)

    Kollmar, Christian; Filatov, Michael

    2008-01-01

    The orbital products of occupied and virtual orbitals are employed as an expansion basis for the charge density generating the local potential in the optimized effective potential method thus avoiding the use of auxiliary basis sets. The high computational cost arising from the quadratic increase of

  15. Determination of Mesalamine Related Impurities from Drug Product by Reversed Phase Validated UPLC Method

    Directory of Open Access Journals (Sweden)

    Trivedi Rakshit Kanubhai

    2011-01-01

    Full Text Available In the present study gradient reversed-phase UPLC method was developed for simultaneous determination and separation of impurities and degradation products from drug product. The chromatographic separation was performed on acquity UPLC BEH C18 column (50 mm×2.1 mm, 1.7 µm using gradient elution. Other UPLC parameters which were optimised are flow rate, 0.7 mL/min; detection wavelength, 220 nm; column oven temperature, 40 °C and injection volume 7 µL. Stability indicating capability was established by forced degradation experiments and separation of known degradation products. The method was validated as per International Conference on Harmonization (ICH guideline. For all impurities and mesalamine, LOQ (limit of quantification value was found precise with RSD (related standard daviation of less than 2.0%. In essence, the present study provides an improved low detection limit and lower run time for evaluation of pharmaceutical quality of mesalamine delayed-release formulation. Moreover, the developed method was successfully applied for quantification of impurities and degradation products in mesalamine delayed-release formulation. The same method can also be used for determination of related substances from mesalamine drug substance.

  16. Simple method for determination of patulin production by Penicillium griseofulvum Dierckx.

    Science.gov (United States)

    Torres, M; Sanchis, V; Riba, M; Canela, R

    1986-01-01

    Patulin production by Penicillium griseofulvum was monitored with Sep-Pak cartridges and high-pressure liquid chromatography. Determination and quantification of this metabolite proved to be very simple, and our method saved time and a large amount of organic solvents. PMID:3513700

  17. Productivity of a coral reef using boundary layer and enclosure methods

    Science.gov (United States)

    McGillis, W.R.; Langdon, C.; Loose, B.; Yates, K.K.; Corredor, Jorge

    2011-01-01

    The metabolism of Cayo Enrique Reef, Puerto Rico, was studied using in situ methods during March 2009. Benthic O2 fluxes were used to calculate net community production using both the boundary layer gradient and enclosure techniques. The boundary layer O2 gradient and the drag coefficients were used to calculate productivity ranging from -12.3 to 13.7 mmol O2 m-2 h-1. Productivity measurements from the enclosure method ranged from -11.0 to 12.9 mmol O2 m-2 h-1. During the study, the mean hourly difference between the methods was 0.65 mmol O2 m-2 h-1 (r2 = 0.92), resulting in well-reconciled estimates of net community production between the boundary layer (-33.1 mmol m-2 d-1) and enclosure (-46.3 mmol m-2 d-1) techniques. The results of these independent approaches corroborate quantified rates of metabolism at Cayo Enrique Reef. Close agreement between methods demonstrates that boundary layer measurements can provide near real-time assessments of coral reef health.

  18. 77 FR 33768 - Certain Polyimide Films, Products Containing Same, and Related Methods; Notice of Request for...

    Science.gov (United States)

    2012-06-07

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Polyimide Films, Products Containing Same, and Related Methods; Notice of Request for... viewed on the Commission's electronic docket (EDIS) at http://edis.usitc.gov . Hearing-impaired persons...

  19. Gelatin controversies in food, pharmaceuticals, and personal care products: Authentication methods, current status, and future challenges.

    Science.gov (United States)

    Ali, Eaqub; Sultana, Sharmin; Hamid, Sharifah Bee Abd; Hossain, Motalib; Yehya, Wageeh A; Kader, Abdul; Bhargava, Suresh K

    2016-12-29

    Gelatin is a highly purified animal protein of pig, cow, and fish origins and is extensively used in food, pharmaceuticals, and personal care products. However, the acceptability of gelatin products greatly depends on the animal sources of the gelatin. Porcine and bovine gelatins have attractive features but limited acceptance because of religious prohibitions and potential zoonotic threats, whereas fish gelatin is welcomed in all religions and cultures. Thus, source authentication is a must for gelatin products but it is greatly challenging due to the breakdown of both protein and DNA biomarkers in processed gelatins. Therefore, several methods have been proposed for gelatin identification, but a comprehensive and systematic document that includes all of the techniques does not exist. This up-to-date review addresses this research gap and presents, in an accessible format, the major gelatin source authentication techniques, which are primarily nucleic acid and protein based. Instead of presenting these methods in paragraph form which needs much attention in reading, the major methods are schematically depicted, and their comparative features are tabulated. Future technologies are forecasted, and challenges are outlined. Overall, this review paper has the merit to serve as a reference guide for the production and application of gelatin in academia and industry and will act as a platform for the development of improved methods for gelatin authentication.

  20. 77 FR 47092 - Certain Polyimide Films, Products Containing Same, and Related Methods; Notice of Commission...

    Science.gov (United States)

    2012-08-07

    ... COMMISSION Certain Polyimide Films, Products Containing Same, and Related Methods; Notice of Commission Determination to Partially Review and Partially Vacate the Final Initial Determination of the Administrative Law... the U.S. International Trade Commission has determined to partially review and partially vacate the...

  1. METHODS OF ASSESSING THE DEGREE OF DESTRUCTION OF RUBBER PRODUCTS USING COMPUTER VISION ALGORITHMS

    Directory of Open Access Journals (Sweden)

    A. A. Khvostov

    2015-01-01

    Full Text Available For technical inspection of rubber products are essential methods of improving video scopes analyzing the degree of destruction and aging of rubber in an aggressive environment. The main factor determining the degree of destruction of the rubber product, the degree of coverage is cracked, which can be described as the amount of the total area, perimeter cracks, geometric shapes and other parameters. In the process of creating a methodology for assessing the degree of destruction of rubber products arises the problem of the development of machine vision algorithm for estimating the degree of coverage of the sample fractures and fracture characterization. For the development of image processing algorithm performed experimental studies on the artificial aging of several samples of products that are made from different rubbers. In the course of the experiments it was obtained several samples of shots vulcanizates in real time. To achieve the goals initially made light stabilization of array images using Gaussian filter. Thereafter, for each image binarization operation is applied. To highlight the contours of the surface damage of the sample is used Canny algorithm. The detected contours are converted into an array of pixels. However, a crack may be allocated to several contours. Therefore, an algorithm was developed by combining contours criterion of minimum distance between them. At the end of the calculation is made of the morphological features of each contour (area, perimeter, length, width, angle of inclination, the At the end of the calculation is made of the morphological features of each contour (area, perimeter, length, width, angle of inclination, the Minkowski dimension. Show schedule obtained by the method parameters destruction of samples of rubber products. The developed method allows you to automate assessment of the degree of aging of rubber products in telemetry systems, to study the dynamics of the aging process of polymers to

  2. Alternative methods of processing bio-feedstocks in formulated consumer product design.

    Science.gov (United States)

    Peremezhney, Nicolai; Jacob, Philipp-Maximilian; Lapkin, Alexei

    2014-01-01

    In this work new methods of processing bio-feedstocks in the formulated consumer products industry are discussed. Our current approach to formulated products design is based on heuristic knowledge of formulators that allows selecting individual compounds from a library of available materials with known properties. We speculate that most of the compounds (or functions) that make up the product to be designed can potentially be obtained from a few bio-sources. In this case, it may be possible to design a sequence of transformations required to convert feedstocks into products with desired properties, analogous to a metabolic pathway of a complex organism. We conceptualize some novel approaches to processing bio-feedstocks with the aim of bypassing the step of a fixed library of ingredients. Two approaches are brought forward: one making use of knowledge-based expert systems and the other making use of applications of metabolic engineering and dynamic combinatorial chemistry.

  3. Methodical Approach to Diagnostics of Efficiency of Production Economic Activity of an Enterprise

    Directory of Open Access Journals (Sweden)

    Zhukov Andrii V.

    2014-03-01

    Full Text Available The article offers developments of a methodical approach to diagnostics of efficiency of production economic activity of an enterprise, which, unlike the existing ones, is realised through the following stages: analysis of the enterprise external environment; analysis of the enterprise internal environment; identification of components of efficiency of production economic activity for carrying out complex diagnostics by the following directions: efficiency of subsystems of the enterprise production economic activity, efficiency of use of separate types of resources and socio-economic efficiency; scorecard formation; study of tendencies of change of indicators; identification of cause-effect dependencies between the main components of efficiency for diagnosing reasons of its level; diagnosing deviations of indicator values from their optimal values; development of a managerial decision on preserving and increasing efficiency of production economic activity of the enterprise.

  4. Validation of a spectrophotometer-based method for estimating daily sperm production and deferent duct transit.

    Science.gov (United States)

    Froman, D P; Rhoads, D D

    2012-10-01

    The objectives of the present work were 3-fold. First, a new method for estimating daily sperm production was validated. This method, in turn, was used to evaluate testis output as well as deferent duct throughput. Next, this analytical approach was evaluated in 2 experiments. The first experiment compared left and right reproductive tracts within roosters. The second experiment compared reproductive tract throughput in roosters from low and high sperm mobility lines. Standard curves were constructed from which unknown concentrations of sperm cells and sperm nuclei could be predicted from observed absorbance. In each case, the independent variable was based upon hemacytometer counts, and absorbance was a linear function of concentration. Reproductive tracts were excised, semen recovered from each duct, and the extragonadal sperm reserve determined by multiplying volume by sperm cell concentration. Testicular sperm nuclei were procured by homogenization of a whole testis, overlaying a 20-mL volume of homogenate upon 15% (wt/vol) Accudenz (Accurate Chemical and Scientific Corporation, Westbury, NY), and then washing nuclei by centrifugation through the Accudenz layer. Daily sperm production was determined by dividing the predicted number of sperm nuclei within the homogenate by 4.5 d (i.e., the time sperm with elongated nuclei spend within the testis). Sperm transit through the deferent duct was estimated by dividing the extragonadal reserve by daily sperm production. Neither the efficiency of sperm production (sperm per gram of testicular parenchyma per day) nor deferent duct transit differed between left and right reproductive tracts (P > 0.05). Whereas efficiency of sperm production did not differ (P > 0.05) between low and high sperm mobility lines, deferent duct transit differed between lines (P < 0.001). On average, this process required 2.2 and 1.0 d for low and high lines, respectively. In summary, we developed and then tested a method for quantifying male

  5. Validation of a Generic qHNMR Method for Natural Products Analysis†

    Science.gov (United States)

    Gödecke, Tanja; Napolitano, José G.; Rodríguez-Brasco, María F.; Chen, Shao-Nong; Jaki, Birgit U.; Lankin, David C.; Pauli, Guido F.

    2014-01-01

    Introduction Nuclear magnetic resonance (NMR) spectroscopy is increasingly employed in the quantitative analysis and quality control (QC) of natural products (NPs) including botanical dietary supplements (BDSs). The establishment of qHNMR based QC protocols requires method validation. Objective Develop and validate a generic qHNMR method. Optimize acquisition and processing parameters, with specific attention to the requirements for the analysis of complex NP samples, including botanicals and purity assessment of NP isolates. Methodology In order to establish the validated qHNMR method, samples containing two highly pure reference materials were used. The influence of acquisition and processing parameters on the method validation were examined, and general aspects of method validation of qHNMR methods discussed. Subsequently, the established method was applied to the analysis of two natural products samples: a purified reference compound and a crude mixture. Results The accuracy and precision of qHNMR using internal or external calibration were compared, using a validated method suitable for complex samples. The impact of post-acquisition processing on method validation was examined using three software packages: TopSpin, MNova, and NUTS. The dynamic range of the developed qHNMR method was 5,000:1 with a limit of detection (LOD) of better than 10 μM. The limit of quantification (LOQ) depends on the desired level of accuracy and experiment time spent. Conclusions This study revealed that acquisition parameters, processing parameters, and processing software all contribute to qHNMR method validation. A validated method with high dynamic range and general workflow for qHNMR analysis of NPs is proposed. PMID:23740625

  6. Generating and testing methods for consumer-oriented product development; Genererende en toetsingsmethoden voor consumentgerichte productontwikkeling

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-10-01

    In order to obtain a good insight into various design methods that can be used by product developers to enable them to develop and test useful domotics products (domotics: intelligent systems for the home), an inventory has been made of the methods used in the Netherlands. The inventory is directed at two categories of methods: (1) Methods of getting better acquainted with the user and/or the problem, and of generating novel solutions: generative methods; and (2) Methods of assessing solutions (through various phases of the designing process): testing methods. The first category of methods concentrates on the designing process. In other words: how can the designer realise as much as possible of the workability of (domotics) products during the designing process? The second category aims at testing a design (in whatever shape: drawing, prototype, functional computer animation, etc.) through its users. These are methods of assessing a design at various stages of the designing process. [Dutch] Om een goed inzicht te krijgen in verschillende ontwerpmethoden die productontwikkelaars kunnen gebruiken om bruikbare domoticaproducten te kunnen ontwikkelen en toetsen, is een inventarisatie uitgevoerd naar de methoden die in Nederland worden gebruikt. De inventarisatie richt zich op twee categorieen methoden: (1) methoden om de gebruiker casu quo het probleem beter te leren kennen en nieuwe oplossingen te genereren, zogenaamde genererende methoden, en (2) methoden om oplossingen te evatueren (in verschillende fasen van het ontwerpproces), zogenaamde toetsingsmethoden. De eerste categorie methoden richt zich op het ontwerpproces: hoe kan de ontwerper tijdens het ontwerpproces de bruikbaarheid van (domotica)producten zoveel mogelijk realiseren? De tweede categorie methoden is erop gericht om een ontwerp (in wat voor vorm dan ook: tekening, prototype, functionele computeranimatie, enzovoort) te toetsen bij gebruikers. Het zijn methoden om een ontwerp, op verschillende momenten

  7. [Statistical methods to optimize immobilization and bacteriocin production by Lactobacillus paracasei HD1.7].

    Science.gov (United States)

    Chen, Jianwei; Li, Xiuliang; Yin, Bo; Liu, Guoming; Wang, Kun; Ping, Wenxiang

    2009-05-01

    To enhance bacteriocin production by Lactobacillus paracasei HD1.7 immobilized with calcium alginate gel by statistical methods. A 2(6-2) two-level fractional factorial design was employed first where 6 variables were studied for their influence on bacteriocin production. The concentration of sodium alginate, inoculation volume and culture time were the most significant variables to improve bacteriocin production. The greatest response area was estimated by the design of steepest ascent approach. A three-level Box-Behnken factorial design was employed for maximizing the bacteriocin production and the number of cell cycle. The repeated batch fermentation using immobilized cells was done. The optimal condition for bacteriocin production and the number of cell cycle was with sodium alginate 2.8%, CaCl2 5%, immobilization time 4 h, the density of entrapped cells 1/20, culture time 63 h and inoculation volume 8.2%. The period of fermentation was 24 h of a batch fermentation after 63 h and bacteriocin production was 70% of free-cell fermentation. After optimizing, the total production of bacteriocin was increased by 19% using the batch fermentation during 327 hours, the beads were intact with little cell leakage and repeatedly used, which laid foundation for the high study of bacteriocin and finally extracted.

  8. Bacterial tracking in a dairy production system using phenotypic and ribotyping methods.

    Science.gov (United States)

    Ralyea, R D; Wiedmann, M; Boor, K J

    1998-10-01

    A systematic sampling plan was designed to collect raw and pasteurized milk samples throughout a single-raw milk source, dairy-processing operation experiencing reduced product shelf lives due to bacterial contamination. The objectives were to track bacterial contamination sources throughout a complete dairy production system and use this information to reduce bacterial spoilage losses in processed fluid products. Over a 5-week period, 233 bacterial isolates were collected, representative of different colony morphologies on psychrotrophic bacteria count (PBC) plates. Forty-five isolates (19%) were obtained from pasteurized milk and 188 (81%) were isolated from raw product. Thirty isolates were identified as Pseudomonas spp. by Gram stain and biochemical methods. Of these, 27 (90%) were postpasteurization isolates and 3 (10%) were raw milk isolates. Automated ribotyping revealed that raw and pasteurized Pseudomonas fluorescens isolates were indistinguishable (similarity index > 0.93), suggesting the possibility of postpasteurization contamination with bacteria from raw product. In the plant, filler nozzles were identified as the primary reservoirs of postpasteurization contamination. Nozzle replacement produced significantly lower finished-product PBCs at 7 days postprocessing (> 4-log reduction) and extended fluid product shelf life.

  9. An in vitro Method for Predicting Inhalation Toxicity of Impregnation Spray Products

    DEFF Research Database (Denmark)

    Sørli, Jorid B.; Hansen, Jitka S.; Nørgaard, Asger Wisti

    2015-01-01

    Impregnation spray products are used for making surfaces water and dirt repellent. The products are composed of one or more active film-forming components dissolved or suspended in an appropriate solvent mixture. Exposure to impregnation spray products may cause respiratory distress and new cases...... of the inhalation toxicity of impregnation spray products and thus may reduce the need for animal testing....... of this study was to evaluate whether disruption of the pulmonary surfactant film can be used as a predictor of the toxic effects in vivo. Nine impregnation products with various chemical compositions were selected for testing and the main constituents of each product, e.g., solvents, co-solvents and film...... and in vivo. The true positive rate of the in vitro method was 100%, i.e. the test could correctly identify all products with toxic effects in vivo, the true negative rate was 40%. Investigation of inhibition of the pulmonary surfactant system, e.g. by capillary surfactometry, was found useful for evaluation...

  10. Practical application of game theory based production flow planning method in virtual manufacturing networks

    Science.gov (United States)

    Olender, M.; Krenczyk, D.

    2016-08-01

    Modern enterprises have to react quickly to dynamic changes in the market, due to changing customer requirements and expectations. One of the key area of production management, that must continuously evolve by searching for new methods and tools for increasing the efficiency of manufacturing systems is the area of production flow planning and control. These aspects are closely connected with the ability to implement the concept of Virtual Enterprises (VE) and Virtual Manufacturing Network (VMN) in which integrated infrastructure of flexible resources are created. In the proposed approach, the players role perform the objects associated with the objective functions, allowing to solve the multiobjective production flow planning problems based on the game theory, which is based on the theory of the strategic situation. For defined production system and production order models ways of solving the problem of production route planning in VMN on computational examples for different variants of production flow is presented. Possible decision strategy to use together with an analysis of calculation results is shown.

  11. Analytical methods for quantifying greenhouse gas flux in animal production systems.

    Science.gov (United States)

    Powers, W; Capelari, M

    2016-08-01

    Given increased interest by all stakeholders to better understand the contribution of animal agriculture to climate change, it is important that appropriate methodologies be used when measuring greenhouse gas (GHG) emissions from animal agriculture. Similarly, a fundamental understanding of the differences between methods is necessary to appropriately compare data collected using different approaches and design meaningful experiments. Sources of carbon dioxide, methane, and nitrous oxide emissions in animal production systems includes the animals, feed storage areas, manure deposition and storage areas, and feed and forage production fields. These 3 gases make up the primary GHG emissions from animal feeding operations. Each of the different GHG may be more or less prominent from each emitting source. Similarly, the species dictates the importance of methane emissions from the animals themselves. Measures of GHG flux from animals are often made using respiration chambers, head boxes, tracer gas techniques, or in vitro gas production techniques. In some cases, a combination of techniques are used (i.e., head boxes in combination with tracer gas). The prominent methods for measuring GHG emissions from housing include the use of tracer gas techniques or direct or indirect ventilation measures coupled with concentration measures of gases of interest. Methods for collecting and measuring GHG emissions from manure storage and/or production lots include the use of downwind measures, often using photoacoustic or open path Fourier transform infrared spectroscopy, combined with modeling techniques or the use of static chambers or flux hood methods. Similar methods can be deployed for determining GHG emissions from fields. Each method identified has its own benefits and challenges to use for the stated application. Considerations for use include intended goal, equipment investment and maintenance, frequency and duration of sampling needed to achieve desired representativeness

  12. Impact of Irrigation Method on Water Use Efficiency and Productivity of Fodder Crops in Nepal

    Directory of Open Access Journals (Sweden)

    Ajay K Jha

    2016-01-01

    Full Text Available Improved irrigation use efficiency is an important tool for intensifying and diversifying agriculture in Nepal, resulting in higher economic yield from irrigated farmlands with a minimum input of water. Research was conducted to evaluate the effect of irrigation method (furrow vs. drip on the productivity of nutritious fodder species during off-monsoon dry periods in different elevation zones of central Nepal. A split-block factorial design was used. The factors considered were treatment location, fodder crop, and irrigation method. Commonly used local agronomical practices were followed in all respects except irrigation method. Results revealed that location effect was significant (p < 0.01 with highest fodder productivity seen for the middle elevation site, Syangja. Species effects were also significant, with teosinte (Euchlaena mexicana having higher yield than cowpea (Vigna unguiculata. Irrigation method impacted green biomass yield (higher with furrow irrigation but both methods yielded similar dry biomass, while water use was 73% less under drip irrigation. Our findings indicated that the controlled application of water through drip irrigation is able to produce acceptable yields of nutritionally dense fodder species during dry seasons, leading to more effective utilization and resource conservation of available land, fertilizer and water. Higher productivity of these nutritional fodders resulted in higher milk productivity for livestock smallholders. The ability to grow fodder crops year-round in lowland and hill regions of Nepal with limited water storages using low-cost, water-efficient drip irrigation may greatly increase livestock productivity and, hence, the economic security of smallholder farmers.

  13. Decomposition and Cross-Product-Based Method for Computing the Dynamic Equation of Robots

    Directory of Open Access Journals (Sweden)

    Ching-Long Shih

    2012-08-01

    Full Text Available This paper aims to demonstrate a clear relationship between Lagrange equations and Newton-Euler equations regarding computational methods for robot dynamics, from which we derive a systematic method for using either symbolic or on-line numerical computations. Based on the decomposition approach and cross-product operation, a computing method for robot dynamics can be easily developed. The advantages of this computing framework are that: it can be used for both symbolic and on-line numeric computation purposes, and it can also be applied to biped systems, as well as some simple closed-chain robot systems.

  14. Heat production in growing pigs calculated according to the RQ and CN methods

    DEFF Research Database (Denmark)

    Christensen, K; Chwalibog, André; Henckel, S

    1988-01-01

    1. Heat production, calculated according to the respiratory quotient methods, HE(RQ), and the carbon nitrogen balance method, HE(CN), was compared using the results from a total of 326 balance trials with 56 castrated male pigs fed different dietary composition and variable feed levels during...... the difference. 6. In pigs receiving a cereal based diet, HE(RQ) may be expected to give 3-4% higher values than HE(CN), but in case easily available carbohydrates (glucose, sucrose) or high-fibre diets are provided, the differences may be larger. 7. Both methods were carried out with similar accuracy...

  15. Least-squares methods involving the H{sup -1} inner product

    Energy Technology Data Exchange (ETDEWEB)

    Pasciak, J.

    1996-12-31

    Least-squares methods are being shown to be an effective technique for the solution of elliptic boundary value problems. However, the methods differ depending on the norms in which they are formulated. For certain problems, it is much more natural to consider least-squares functionals involving the H{sup -1} norm. Such norms give rise to improved convergence estimates and better approximation to problems with low regularity solutions. In addition, fewer new variables need to be added and less stringent boundary conditions need to be imposed. In this talk, I will describe some recent developments involving least-squares methods utilizing the H{sup -1} inner product.

  16. Optimisation of production from an oil-reservoir using augmented Lagrangian methods

    Energy Technology Data Exchange (ETDEWEB)

    Doublet, Daniel Christopher

    2007-07-01

    This work studies the use of augmented Lagrangian methods for water flooding production optimisation from an oil reservoir. Commonly, water flooding is used as a means to enhance oil recovery, and due to heterogeneous rock properties, water will flow with different velocities throughout the reservoir. Due to this, water breakthrough can occur when great regions of the reservoir are still unflooded so that much of the oil may become 'trapped' in the reservoir. To avoid or reduce this problem, one can control the production so that the oil recovery rate is maximised, or alternatively the net present value (NPV) of the reservoir is maximised. We have considered water flooding, using smart wells. Smart wells with down-hole valves gives us the possibility to control the injection/production at each of the valve openings along the well, so that it is possible to control the flowregime. One can control the injection/production at all valve openings, and the setting of the valves may be changed during the production period, which gives us a great deal of control over the production and we want to control the injection/ production so that the profit obtained from the reservoir is maximised. The problem is regarded as an optimal control problem, and it is formulated as an augmented Lagrangian saddle point problem. We develop a method for optimal control based on solving the Karush-Kuhn-Tucker conditions for the augmented Lagrangian functional, a method, which to my knowledge has not been presented in the literature before. The advantage of this method is that we do not need to solve the forward problem for each new estimate of the control variables, which reduces the computational effort compared to other methods that requires the solution of the forward problem every time we find a new estimate of the control variables, such as the adjoint method. We test this method on several examples, where it is compared to the adjoint method. Our numerical experiments show

  17. IMPLEMENTING THE 5S METHOD IN THE PRODUCTION SYSTEM OF DACIA & RENAULT

    Directory of Open Access Journals (Sweden)

    Marin CIOBANU

    2014-11-01

    Full Text Available The aim of this paper is to demonstrate the usefulness of the 5S method in addressing the issues of continuous improvement of productivity and quality of work. There are presented the 5 steps, techniques and the adjacent tools. Solutions implemented in the production system Dacia & Renault are indicated. This article provides a practical framework. The 5S method follows the Deming PDCA cycle which constitutes the starting point of the SDCA cycle of continuous improvement of the company's activities in order to obtain excellence. The implementing time of the method depends on the resources and materials allocated. Deployment of 5S is achieved by a scheme of "3+2": the first 3S are tangible and immediate actions, the last 2S appeal to specific management actions. The efficacy of their own workplace in total autonomy creates comfort in the work environment and gives personal benefits to workers.

  18. Biogas Production from Rice Husk Waste by using Solid State Anaerobic Digestion (SSAD Method

    Directory of Open Access Journals (Sweden)

    Hawali Abdul Matin Hashfi

    2018-01-01

    Full Text Available An effort to obtain alternative energy is still interesting subject to be studied, especially production of biogas from agriculture waste. This paper was an overview of the latest development of biogas researches from rice husk waste by Solid State Anaerobic Digestion (SSAD. The main obstacle of biogas production from rice husk waste was the lignin content which is very difficult degraded by microbes. Various pretreatments have been conducted, either physically, chemically as well as biologically. The SSAD method was an attractive option because of the low water content of rice husk waste. The biogas yield by SSAD method gave more attractive result compared to Liquid Anaerobic Digestion (LAD method. Various studies were still conducted in batch mode laboratory scale and also has not found optimum operating conditions. Research on a larger scale such as bench and pilot scale with continuous systems will be an increase trend in the future research.

  19. Method of determining of polybrominated diphenyl ethers in fish and fish products by the method of liquid chromatography

    Directory of Open Access Journals (Sweden)

    O.N. Timofeeva

    2016-09-01

    Full Text Available The aim of the work was to develop a methodology for determining of polybrominated diphenyl ethers (PBDE in fish and fish products for the control of impurities content in the food and environmental objects in general. The conditions of chromatography (temperature conditions, the impact of the speed and magnitude of dividing of the gas-carrier stream using a HP-1 capillary columns, the DB-5, HP-50 +, DB-1; and lipids destructive and non-destructive cleaning methods of extract during the determination of PBDEs. The method of determination of 2,2,4,4-Tetrabromodiphenyl ether (BDE-47, 2,2,4,4,5-pentabromodiphenyl ether (BDE-99 and decabromodiphenyl ether (BDE-209 in fish and fish products by the liquid chromatography with electron detector was suggested. The method of PBDE is based on the extraction of samples with hexane-acetone (3:1, purification of the extract with concentrated sulfuric acid (phase ratio hexane-sulfuric acid – 5:1. The second purification step is carried out by using solid phase extraction cartridges «SiOH-H2SO4/SA» and hexane as the eluent. Gas chromatographic analysis of the determination of BDE-47 and BDE-99 is carried out on low-polar capillary column DB-5 (30 m x0.25 mm x0.25 mum with the programming of the column temperature. In determining the BDE-209 a DB-1 nonpolar capillary column was used (15 m x 0.25 mm x 0.1 mum with the column temperature programming. Calculation of the content of BDE-47 and BDE-99 is carried out with the internal standard (2,2, 3,4,4-pentabromodiphenyl ether (BDE-85, BDE-209 by absolute calibration. In determining the BDE-209 the calibration matrix was used. The range of concentrations of the calibration solutions for the determination of BDE-47 and BDE-99 is 0.005–0.05 g/cm 3 , for BDE-209 0.05–0.3 g/cm 3 . The technique allows the measurement of BDE-47 and BDE-99 in the range of 0.0002–0.05 mg/kg of the product concerned; BDE-209 – in the range of 0.002–0.3 mg/kg. The metrological

  20. Molecular methods for microbiological quality control of meat and meat products: a review.

    Science.gov (United States)

    Gokulakrishnan, P; Vergis, Jess

    2015-01-01

    Achieving food safety is a global health goal and the food-borne diseases take a major check on global health. Therefore, detection of microbial pathogens in food is the solution to the prevention and recognition of problems related to health and safety. Conventional and standard bacterial detection methods such as culture and colony counting methods and immunology-based methods may take up to several hours or even a few days to yield a result. Obviously, this is inadequate, and recently many researchers are focusing towards the progress of rapid diagnostic methods. The advent of molecular techniques has led to the development of a diverse array of assay for quality control of meat and meat products. Rapid analysis using DNA hybridization and amplification techniques offer more sensitivity and specificity to get results than culture based methods as well as dramatic reduction in the time to get results. Many methods have also achieved the high level automation, facilitating their application as routine sample screening assays. This review is intended to provide an overview of the molecular methods for microbiological quality control of meat and meat products.

  1. Water Productivity of Irrigated Rice under Transplanting, Wet Seeding and Dry Seeding Methods of Cultivation

    Directory of Open Access Journals (Sweden)

    Murali, NS.

    1997-01-01

    Full Text Available Water productivity (WP of irrigated lowland rice was determined during the 1994 dry (January to May and wet (August to December seasons on a heavy clay acid sulphate soil. Treatments consisted of three cultivation methods : transplanted rice, pregerminated seeds broadcasted on puddled soil (wet seeding and dry seeds broadcasted on unpuddled soil (dry seeding. In wet and dry seeded plots, continuous standing water condition was initiated 17 days after sowing. Total water requirement for rice production was highest in transplanted plots (755 mm in wet season and 1154 mm in dry season and was lowest in dry seeded plots (505 mm in wet season and 1040 mm in dry season. Dry seeding required no water for land preparation but transplanting and wet seeding methods required 18 - 20 % of total water requirement in dry season and 27 - 29 % in wet season. Total percolation was maximum (99 mm in wet season and 215 mm in dry season in dry seeding method and was minimum (62 mm in wet season and 94 mm in dry season in transplanting method. In dry and wet seeding methods, daily percolation gradually decreased with the age of the crop. Total seepage loss did not show any significant difference between the cultivation methods in the two seasons. Grain yield was not affected by the three cultivation methods in both seasons. Water productivity (the ratio between grain yield and total amount of water used in production was 3.5 - 4.1 kg ha-1 mm-1, 3.8 - 4.4 kg ha-1 mm-1 and 4.1 - 5.5 kg ha-1 mm-1 in transplanted, wet seeded and dry seeded rice, respectively. Labour requirement for land preparation and sowing was maximum in transplanted (219 - 226 man-hours ha-1 followed by wet (104 -112 man-hours ha-1 and dry seeded (94 - 99 man-hours ha-1 methods. However, in wet season extra labour (77 man-hours ha-1 was required for weeding after crop establishment in dry and wet seeding methods. Crop maturity was 20 days earlier in wet and dry seeding methods compared to

  2. The Graphite Isotope Ratio Method (GIRM): A Plutonium Production Verification Tool

    Energy Technology Data Exchange (ETDEWEB)

    JP McNeece; BD Reid; TW Wood

    1999-01-01

    Over the lifetime of a production reactor, neutrons from the fission process not only convert U-238 into plutonium but also bring about changes in the elements of the reactor's core components. Components such as shielding, pressure vessels, coolant piping, control rods, structural supports, and, in the case of graphite moderated reactors, the solid graphite moderator are all affected. Because a reactor's total plutonium production is directly related to total neutron fluence, and, likewise, changes in the elements and isotopes of a reactor's core components are directly related to fluence; it was argued that measuring these changes could provide an accurate estimate of a reactor's total plutonium production. The U.S. Department of Energy funds a project at Pacific Northwest National Laboratory (PNNL) to develop this concept into a practical plutonium production verification tool for graphite moderated reactors. The following sections describe the GIRM project development process. The purpose of this document is to provide a simple, concise description of the graphite isotope ratio method (GIRM) for use as a verification tool in estimating a graphite-moderated reactor's total plutonium production. The description covers the theory behind the technique and how the method is actually applied.

  3. SIMPLE METHODS FOR INCREASING THE PRODUCTIVITY IN A WORKSHOP OF TEXTILE GARMENTS

    Directory of Open Access Journals (Sweden)

    PORAV Viorica

    2014-05-01

    Full Text Available This paper is based mainly on experience and is the result of optimization analysis of work operations in departments that make clothing products, with maximum 200 workers and financially unable to invest in expensive technical equipment. The analysis takes the problem of increasing productivity for some work operations, such as the operation of the realization of loops, cutting them to the required size, forming packages, for their application to the top of the pants. The analysis performed was concerned not only with increasing productivity but also to create better working conditions for workers. Of course, through a thorough analysis can be improved and other working methods. Ergonomic workplace organization, centralization of operations or handling study due to their repetitiveness, can result in significant savings of time working. Equally it may affect the operations times for making garments and methods of employment with cut marks and accessories needed, or how to discharge processed workpiece. This paper outlines some options for improving the performance of companies producing textiles, in idea of increasing labor productivity and product quality. Even if a firm producing textiles, has sufficient financial resources for modern equipment, the studies conducted by experts, can brings improvements in working time and this without high costs.

  4. Application of fuzzy inference system by Sugeno method on estimating of salt production

    Science.gov (United States)

    Yulianto, Tony; Komariyah, Siti; Ulfaniyah, Nurita

    2017-08-01

    Salt is one of the most important needs in everyday life. Making traditional salt largely is done by smallholder farmers in addition by manufacturers of industrial salt. factors that affect the production of salt include seawater, soil, water influence and weather conditions including rainfall wind speed and solar radiation or long dry erratic, these conditions obviously affect the salt farmers that will affect the production quantities of salt produced by salt farmers. In this study, the fuzzy logic method is applied to Sugeno fuzzy inference systems to estimate the production of salt by variables - variables that affect it. This study aims to estimate how much production by applying fuzzy inference systems zero-order Sugeno method based on the variable wind speed, solar radiation, rainfall and the amount of production. Retrieval of data obtained from the Air Quality Meteorology and Geophysics. salt farmers in Pamekasan District of Pademawu Village Majungan. Data taken within 2 years per week from June to December of 2014 and 2015. The Sugeno fuzzy logic model in this study using output (consequent) in the form of equation constants (Sugeno models Order zero). Apparently from the research results obtained by the error value most low at 0.0917, so it can be said to be close to zero.

  5. Biodiesel production by biocatalysis using alternative method for lipase immobilization in hydrogel

    Directory of Open Access Journals (Sweden)

    Fernanda Marder

    2009-03-01

    Full Text Available The society has been looking for alternatives in order to stop the process of environmental destruction installed in the world, however, starting from last century, a new vision on the indiscriminate use of the environmental resources started to be discussed leading to the use of new technologies of production of cleaner fuel, as the biodiesel, produced from vegetable oils. The enzymatic processes are a production alternative, for they are methods with losses reduction and larger efficiency, presenting however, high production cost. With the objective of reducing costs and increasing the efficiency we have searched the enzymes immobilization through alternative method and to use them as biocatalysts in the biodiesel production. The immobilization of the lipase PS Amano was accomplished in spheres formed by the hydration of commercial hydrogel in aqueous solution containing the enzyme. With the immobilized enzyme it was accomplished the transesterification, in which it was obtained conversions in methyl esters of up to 70%, in organic solvent, with 24h, 55°C, 100 rpm and 40 hydrogel spheres with immobilized enzyme. The method comes as a promising alternative technology for the biodiesel obtaining.

  6. A comparative analysis of environmental impacts of non-fossil energy production methods

    Science.gov (United States)

    Kiss, Adam

    2014-12-01

    The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  7. A comparative analysis of environmental impacts of non-fossil energy production methods

    Directory of Open Access Journals (Sweden)

    Kiss Adam

    2014-01-01

    Full Text Available The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  8. A newton cooperative genetic algorithm method for in silico optimization of metabolic pathway production.

    Science.gov (United States)

    Ismail, Mohd Arfian; Deris, Safaai; Mohamad, Mohd Saberi; Abdullah, Afnizanfaizal

    2015-01-01

    This paper presents an in silico optimization method of metabolic pathway production. The metabolic pathway can be represented by a mathematical model known as the generalized mass action model, which leads to a complex nonlinear equations system. The optimization process becomes difficult when steady state and the constraints of the components in the metabolic pathway are involved. To deal with this situation, this paper presents an in silico optimization method, namely the Newton Cooperative Genetic Algorithm (NCGA). The NCGA used Newton method in dealing with the metabolic pathway, and then integrated genetic algorithm and cooperative co-evolutionary algorithm. The proposed method was experimentally applied on the benchmark metabolic pathways, and the results showed that the NCGA achieved better results compared to the existing methods.

  9. Identification and quantification of adulteration in Garcinia cambogia commercial products by chromatographic and spectrometric methods.

    Science.gov (United States)

    Jamila, Nargis; Choi, Ji Yeon; Hong, Joon Ho; Nho, Eun Yeong; Khan, Naeem; Jo, Cheon Ho; Chun, Hyang Sook; Kim, Kyong Su

    2016-12-01

    Species of genus Garcinia are rich sources of bioactive constituents with antimicrobial, anticancer, anti-inflammatory, hepatoprotective and anti-HIV activities. Commercial products of Garcinia cambogia are used as anti-obesity drugs with increasing market demand. Because of the high price of its products, it can be adulterated with similar lower-priced species. This study was designed to develop and validate an accurate and efficient method for the detection of any adulteration (G. indica) in G. cambogia products. For this purpose, high performance liquid chromatography (HPLC) was used to analyse the ethanolic fruit rind extracts of G. cambogia and G. indica, their formulations of 0.5, 1, 2, 5, 10, 20, 30, 40, 50, 60, 70, 80, 90 and 95% G. indica with G. cambogia, and 11 G. cambogia commercial products. The analytical methods were validated by quality assurance parameters of linearity, sensitivity, precision and accuracy. Two marker peaks were detected in G. indica fruit extract, whereas G. cambogia did not show these peaks. The detected peaks were identified as anthocyanins; cyanidin-3-O-sambubioside and cyanidin-3-O-glucoside. In the study to determine the effect of pH and temperature on the stability of its anthocyanin content, HPLC analysis of G. indica extract showed the highest content at pH 1 and 50°C. Using two different mobile phases, the limits of detection (LOD) for cyanidin-3-O-sambubioside and cyanidin-3-O-glucoside were 0.036 and 0.059, and 0.022 and 0.033 mg kg-1, respectively. Furthermore, the inter-day precision (analytical method fulfils the required criteria of Association of Official Analytical Chemists (AOAC). From this study, it was found that the HPLC method used for the detection of adulteration in G. cambogia products is rapid and accurate.

  10. Determination of Mesalamine Related Impurities from Drug Product by Reversed Phase Validated UPLC Method

    OpenAIRE

    Trivedi Rakshit Kanubhai; Patel Mukesh C; Kharkar Amit R

    2011-01-01

    In the present study gradient reversed-phase UPLC method was developed for simultaneous determination and separation of impurities and degradation products from drug product. The chromatographic separation was performed on acquity UPLC BEH C18 column (50 mm×2.1 mm, 1.7 µm) using gradient elution. Other UPLC parameters which were optimised are flow rate, 0.7 mL/min; detection wavelength, 220 nm; column oven temperature, 40 °C and injection volume 7 µL. Stability indicating capability was esta...

  11. The Impact of Project Work and the Writing Process Method on Writing Production

    Directory of Open Access Journals (Sweden)

    Marcela Díaz Ramírez

    2014-10-01

    Full Text Available This article presents the outcomes of an investigation whose main goal was to implement the methodology of project work and a process approach in order to improve writing production in an English class of Colombian university students since their diagnostic tests showed that their written production had the lowest score. Based on data collected, four factors were developed in the process of learning to write when project work and the writing process method are implemented: accuracy, fluency, integrative language skills, and a positive perception towards writing.

  12. A new Energy Saving method of manufacturing ceramic products from waste glass

    Energy Technology Data Exchange (ETDEWEB)

    Haun Labs

    2002-07-05

    This final report summarizes the activities of the DOE Inventions and Innovations sponsored project, ''A New Energy Saving Method of Manufacturing Ceramic Products from Waste Glass.'' The project involved an innovative method of lowering energy costs of manufacturing ceramic products by substituting traditional raw materials with waste glass. The processing method is based on sintering of glass powder at {approx}750 C to produce products which traditionally require firing temperatures of >1200 C, or glass-melting temperatures >1500 C. The key to the new method is the elimination of previous processing problems, which have greatly limited the use of recycled glass as a ceramic raw material. The technology is aligned with the DOE-OIT Glass Industry Vision and Roadmap, and offers significant energy savings and environmental benefits compared to current technologies. A U.S. patent (No. 6,340,650) covering the technology was issued on January 22, 2002. An international PCT Patent Application is pending with designations made for all PCT regions and countries. The goal of the project was to provide the basis for the design and construction of an energy-efficient manufacturing plant that can convert large volumes of waste glass into high-quality ceramic tile. The main objectives of the project were to complete process development and optimization; construct and test prototype samples; and conduct market analysis and commercialization planning. Two types of ceramic tile products were targeted by the project. The first type was developed during the first year (Phase I) to have a glazed-like finish for applications where slip resistance is not critical, such as wall tile. The processing method optimized in Phase I produces a glossy surface with a translucent appearance, without the extra glazing steps required in traditional tile manufacturing. The second type of product was developed during the second year (Phase II). This product was designed to have an

  13. Using Computer Simulation Method to Improve Throughput of Production Systems by Buffers and Workers Allocation

    Directory of Open Access Journals (Sweden)

    Kłos Sławomir

    2015-12-01

    Full Text Available This paper proposes the application of computer simulation methods to support decision making regarding intermediate buffer allocations in a series-parallel production line. The simulation model of the production system is based on a real example of a manufacturing company working in the automotive industry. Simulation experiments were conducted for different allocations of buffer capacities and different numbers of employees. The production system consists of three technological operations with intermediate buffers between each operation. The technological operations are carried out using machines and every machine can be operated by one worker. Multi-work in the production system is available (one operator operates several machines. On the basis of the simulation experiments, the relationship between system throughput, buffer allocation and the number of employees is analyzed. Increasing the buffer capacity results in an increase in the average product lifespan. Therefore, in the article a new index is proposed that includes the throughput of the manufacturing system and product life span. Simulation experiments were performed for different configurations of technological operations.

  14. Chemical Pretreatment Methods for the Production of Cellulosic Ethanol: Technologies and Innovations

    Directory of Open Access Journals (Sweden)

    Edem Cudjoe Bensah

    2013-01-01

    Full Text Available Pretreatment of lignocellulose has received considerable research globally due to its influence on the technical, economic and environmental sustainability of cellulosic ethanol production. Some of the most promising pretreatment methods require the application of chemicals such as acids, alkali, salts, oxidants, and solvents. Thus, advances in research have enabled the development and integration of chemical-based pretreatment into proprietary ethanol production technologies in several pilot and demonstration plants globally, with potential to scale-up to commercial levels. This paper reviews known and emerging chemical pretreatment methods, highlighting recent findings and process innovations developed to offset inherent challenges via a range of interventions, notably, the combination of chemical pretreatment with other methods to improve carbohydrate preservation, reduce formation of degradation products, achieve high sugar yields at mild reaction conditions, reduce solvent loads and enzyme dose, reduce waste generation, and improve recovery of biomass components in pure forms. The use of chemicals such as ionic liquids, NMMO, and sulphite are promising once challenges in solvent recovery are overcome. For developing countries, alkali-based methods are relatively easy to deploy in decentralized, low-tech systems owing to advantages such as the requirement of simple reactors and the ease of operation.

  15. Enhancing bioethanol production from water hyacinth by new combined pretreatment methods.

    Science.gov (United States)

    Zhang, Qiuzhuo; Wei, Yan; Han, Hui; Weng, Chen

    2017-12-27

    This study investigated the possibility of enhancing bioethanol production by combined pretreatment methods for water hyacinth. Three different kinds of pretreatment methods, including microbial pretreatment, microbial combined dilute acid pretreatment, and microbial combined dilute alkaline pretreatment, were investigated for water hyacinth degradation. The results showed that microbial combined dilute acid pretreatment is the most effective method, resulting in the highest cellulose content (39.4 ± 2.8%) and reducing sugars production (430.66 mg·g-1). Scanning Electron Microscopy and Fourier Transform Infrared Spectrometer analysis indicated that the basic tissue of water hyacinth was significantly destroyed. Compared to the other previously reported pretreatment methods for water hyacinth, which did not append additional cellulase and microbes for hydrolysis process, the microbial combined dilute acid pretreatment of our research could achieve the highest reducing sugars. Moreover, the production of bioethanol could achieve 1.40 g·L-1 after fermentation, which could provide an extremely promising way for utilization of water hyacinth. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Multiresidue method for the quantitation of 20 pesticides in aquatic products.

    Science.gov (United States)

    Cho, Ha Ra; Park, Jun Seo; Kim, Junghyun; Han, Sang Beom; Choi, Yong Seok

    2015-12-01

    As the consumption of aquatic products increased, the need for regulation of pesticide residues in aquatic products also emerged. Thus, in this study, a scheduled multiple reaction monitoring (sMRM) method employing a novel extraction and purification step based on QuEChERS with EDTA was developed for the simultaneous quantitation of 20 pesticides (alachlor, aldicarb, carbofuran, diazinon, dimethoate, dimethomorph, ethoprophos, ferimzone, fluridone, hexaconazole, iprobenfos, malathion, methidathion, methiocarb, phenthoate, phosalone, phosmet, phosphamidon, pirimicarb, and simazine) in aquatic products. Additionally, the present method was validated in the aspects of specificity, linearity (r ≥ 0.980), sensitivity (the limit of quantitation (LOQ) ≤ 5 ng/g), relative standard deviation, RSD (1.0% ≤ RSD ≤ 19.4%), and recovery (60.1% ≤ recovery ≤ 117.9%). Finally, the validated method was applied for the determination of the 20 pesticide residues in eel and shrimp purchased from local food markets. In the present study, QuEChERS with EDTA was successfully expanded to residual pesticide analysis for the first time. The present method could contribute to the rapid and successful establishment of the positive list system in South Korea.

  17. Perspectives and strategies of alternative methods used in the risk assessment of personal care products.

    Science.gov (United States)

    Quantin, P; Thélu, A; Catoire, S; Ficheux, H

    2015-11-01

    Risk assessment for personal care products requires the use of alternative methods since animal testing is now totally banned. Some of these methods are effective and have been validated by the "European Union Reference Laboratory for alternatives to animal testing"; but there is still a need for development and implementation of methods for specific endpoints. In this review, we have focused on dermal risk assessment because it is the prime route of absorption and main target organ for personal care products. Within this field, various areas must be assessed: irritation, sensitisation and toxicokinetic. Personal care product behaviour after use by the consumer and potential effects on the environment are also discussed. The purpose of this review is to show evolution and the prospects of alternative methods for safety dermal assessment. Assessment strategies must be adapted to the different chemical classes of substances studied but also to the way in which they are used. Finally, experimental and theoretical technical parameters that may impact on measured effects have been identified and discussed. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  18. VCO Production from Fresh Old Coconut Bunch by Circulating and Pumping Method

    Directory of Open Access Journals (Sweden)

    Muhamad Maulana Azimatun Nur

    2012-04-01

    Full Text Available VCO (Virgin Coconut Oil is one of coco-diesel source, made without high heating and chemicals. Commercial processes production, such fermentation and centrifugation usually need more time and expensive in cost and investment. Circulating by pumping through a nozzle is a new process method invented to produce VCO. The process followed by coalescence method, breaking emulsion by hitting particles through pipe and nozzle. The problem of this method was that the product gave lower yield than another method and not yet qualified. This research was purposed to discover correlation between pressure and time of circulation variables against yield and content (FFA, Peroxide, water content represented by SNI (national Indonesian standard. Producing VCO initiated by producing coconut milk from fresh old coconut, then each 1 litre milk were pumped through the pipe and nozzle with variation of circulations pressures and time. The results were decanted for 10 hours so the oil and water would be separated. The oil at upper layer was taken as final product. Then the last step was analysed the oils and oil cake (blondo. The results showed that pressure and time of circulating variables gave impact to the yield. On optimum variables, 2 atm pressure and 15 minutes of circulating gave better results with 97% yield. This operating variables also affecting oil quality. The minimum water content is 0.1%, free fatty acid is 0.18% and peroxide value is 2 mg/kg eq. The results showed that all of parameters meet the SNI standard.

  19. VCO Production from Fresh Old Coconut Bunch by Circulating and Pumping Method

    Directory of Open Access Journals (Sweden)

    Muhamad Maulana Azimatun Nur

    2012-02-01

    Full Text Available VCO (Virgin Coconut Oil is one of coco-diesel source, made without high heating and chemicals. Commercial processes production, such fermentation and centrifugation usually need more time and expensive in cost and investment. Circulating by pumping through a nozzle is a new process method invented to produce VCO. The process followed by coalescence method, breaking emulsion by hitting particles through pipe and nozzle. The problem of this method was that the product gave lower yield than another method and not yet qualified. This research was purposed to discover correlation between pressure and time of circulation variables against yield and content (FFA, Peroxide, water content represented by SNI (national Indonesian standard. Producing VCO initiated by producing coconut milk from fresh old coconut, then each 1 litre milk were pumped through the pipe and nozzle with variation of circulations pressures and time. The results were decanted for 10 hours so the oil and water would be separated. The oil at upper layer was taken as final product. Then the last step was analysed the oils and oil cake (blondo. The results showed that pressure and time of circulating variables gave impact to the yield. On optimum variables, 2 atm pressure and 15 minutes of circulating gave better results with 97% yield. This operating variables also affecting oil quality. The minimum water content is 0.1%, free fatty acid is 0.18% and peroxide value is 2 mg/kg eq. The results showed that all of parameters meet the SNI standard.

  20. Estimating grass and grass silage degradation characteristics by in situ and in vitro gas production methods

    Directory of Open Access Journals (Sweden)

    Danijel Karolyi

    2010-01-01

    Full Text Available Fermentation characteristics of grass and grass silage at different maturities were studied using in situ and in vitro gas production methods. In situ data determined difference between grass and silage. Degradable fraction decreased as grass matured while the undegradable fraction increased. Rate of degradation (kd was slower for silage than fresh grass. Gas production method (GP data showed that fermentation of degradable fraction was different between stage of maturity in both grass and silage. Other data did not show any difference with the exception for the rate of GP of soluble and undegradable fraction. The in situ degradation characteristics were estimated from GP characteristics. The degradable and undegradable fractions could be estimated by multiple relationships. Using the three-phases model for gas production kd and fermentable organic matter could be estimated from the same parameters. The only in situ parameter that could not be estimated with GP parameters was the soluble fraction. The GP method and the three phases model provided to be an alternative to the in situ method for animal feed evaluations.

  1. Estrogen receptor affinity chromatography: a new method for characterization of novel estrogenic disinfection by-products.

    Science.gov (United States)

    Shang, Guodong; Xue, Jinling; Li, Man; Hu, Hong-Ying; Lu, Yun

    2014-06-01

    To identify the unknown estrogenic disinfection by-products (DBPs) from the chlorination extract, an effective method based on affinity chromatography with immobilized human recombinant estrogen receptor α (ERα) was developed, which has an advantage in targeting different potential estrogenic compounds from mixed sample simultaneously by comparing their relative binding activities to ER. The new method worked well for six known environmental estrogens. To further test the validity of this method for unknown chemicals, six DBPs of diethylstilbestrol (DES) with relatively strong ER binding affinity after chlorination were isolated and identified. It was found that except for 2-chloro-DES which showed 1.36 times stronger binding affinity than DES, most of the by-products bound to ER much more weakly than DES. All these seven by-products induced a dose-dependent transcriptional activation in two-hybrid-yeast assays. Z,Z-dienestrol (DE) and 2-chloro-DES, which exhibiting the weakest and the strongest binding affinity, were further tested for their transcriptional potential as 0.00243 and 0.014 compared to DES, respectively. However, they were still potential harmful environmental estrogenic disruptors as their estrogenic activities were much stronger than that of bisphenol A (BPA). These results demonstrated that the new method can help to screen unknown estrogenic compounds from mixture more efficiently. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. A water productive and economically profitable paddy rice production method to adapt water scarcity in the Vu Gia-Thu Bon river basin, Vietnam

    Directory of Open Access Journals (Sweden)

    Bhone Nay-Htoon

    2013-05-01

    Full Text Available In Vu Gia-Thu Bon river basin, Vietnam, drought during the dry season affected negatively on rice production. High and uneven rainfall distribution cause flooding in the basin during wet season and cause severe agricultural drought during dry season.This study aimed to point out a higher water productive and economically efficient rice production method to adapt water scarcity in the region. Based on available secondary data, water productivity is calculated for different water saving rice production methods, according to Pereira, et al, (2012’s irrigation water productivity and total productivity equations. The profit of technological change is calculated by partial budget analysis of rice production in that area and a sensitivity analysis supports to point out which input factor is sensitive to farmer’s benefit. Farmer’s psychological and social beliefs are used to create fuzzy logic based decision making model. Although water productivities (ranging 0.441 kg/m3/ha to 0.504 kg/m3/ha are ranked as the second after System of Rice Intensification, we demonstrated that Alternate Wetting and Drying method is a recommendable method to the farmer after considering economic profitability and technical simplicity. The System of Rice Intensification method also could be a suitable method to adopt because this method is the highest water productive method (Water Productivities are ranging from 0.77 kg/m3/ha to 1.02 kg/m3/ha coupled with highest yield of rice, subject to certain ecosystem services and payment policies should be developed to subsidize the reduced benefit resulting from this method.

  3. The rationale for selecting the method of calculation of project products coast (works, services

    Directory of Open Access Journals (Sweden)

    O. V. Molchanova

    2017-01-01

    Full Text Available In modern conditions of management it is necessary to develop a number of recommendations on the introduction of management accounting at state-owned enterprises that carry out revenue-generating activities or based on the right of economic management. It is necessary to apply the correct cost-accounting method for the production of products, works, services for a more rational calculation of the cost price. This will allow management personnel to receive timely objective information about their cost price, identify the feasibility of production and sales, justify the assortment, plan profits. The procedure for determining the cost price of the project products (works, services in the theory and practice of the state enterprise of the Astrakhan region “Kasprybproekt” is investigated in the work. With the existing practice of planning in design organizations, the planned cost price of design and survey works for established cost items is planned in the cost estimate for production by the design organization as a whole and by the types of work: design, survey and others, without subdividing it by orders (projects. According to this, accounting of the actual costs for work in the design organizations is based. The study showed that the state enterprise of the Astrakhan region “Kasprybproyekt” performs different projects with different execution periods; therefore, it is advisable to use one method of calculating the cost price - job (order costing method, and link it to the responsibility centers depending on the department of the performer. Based on the research of the used method to the cost price calculate of the project products (works, services in the state enterprise of the Astrakhan region “Kasprybproekt”, it was proposed to use the job (order costing method that allows to detail all the project costs without distorting the final financial result and optimize the project costs. If the calculation method is correctly determined

  4. Decision method for optimal selection of warehouse material handling strategies by production companies

    Science.gov (United States)

    Dobos, P.; Tamás, P.; Illés, B.

    2016-11-01

    Adequate establishment and operation of warehouse logistics determines the companies’ competitiveness significantly because it effects greatly the quality and the selling price of the goods that the production companies produce. In order to implement and manage an adequate warehouse system, adequate warehouse position, stock management model, warehouse technology, motivated work force committed to process improvement and material handling strategy are necessary. In practical life, companies have paid small attantion to select the warehouse strategy properly. Although it has a major influence on the production in the case of material warehouse and on smooth costumer service in the case of finished goods warehouse because this can happen with a huge loss in material handling. Due to the dynamically changing production structure, frequent reorganization of warehouse activities is needed, on what the majority of the companies react basically with no reactions. This work presents a simulation test system frames for eligible warehouse material handling strategy selection and also the decision method for selection.

  5. Reciprocal Allocation Method in Service Departments. The Case of a Production Enterprise

    Science.gov (United States)

    Papaj, Ewelina

    2017-12-01

    The main aim of this article is to indicate the role of reciprocal allocation method in the process of costs calculation. In the environment of nowadays companies, often taking very complex organisational forms, the existence of service departments becomes of great importance. Although, as far as management accounting processes are concerned, which lead to identifying the product cost, the service departments' costs come out to be of minor importance. This article means to prove that the service departments' costs and their reliable settlement are a desirable source of information about the products. This work consists of two parts. First of them features theoretical considerations and a critical analysis of subject literature. In the latter part, the service departments' costs calculation will be presented, basing on reciprocal services in a production enterprise from chemical industry.

  6. Production of advanced materials by methods of self-propagating high-temperature synthesis

    CERN Document Server

    Tavadze, Giorgi F

    2013-01-01

    This translation from the original Russian book outlines the production of a variety of materials by methods of self-propagating high-temperature synthesis (SHS). The types of materials discussed include: hard, refractory, corrosion and wear-resistant materials, as well as other advanced and speciality materials. The authors address the issue of optimal parameters for SHS reactions occurring during processes involving a preliminary metallothermic reduction stage, and they calculate this using thermodynamic approaches. In order to confirm the effectiveness of this approach, the authors describe experiments focussing on the synthesis of elemental crysalline boron, boron carbides and nitrides. Other parts of this brief include theoretical and experimental results on single-stage production of hard alloys on the basis of titanium and zirconium borides, as well as macrokinetics of degassing and compaciton of SHS-products.This brief is suitable for academics, as well as those working in industrial manufacturing com...

  7. RECIPROCAL ALLOCATION METHOD IN SERVICE DEPARTMENTS. THE CASE OF A PRODUCTION ENTERPRISE

    Directory of Open Access Journals (Sweden)

    Ewelina PAPAJ

    2017-10-01

    Full Text Available The main aim of this article is to indicate the role of reciprocal allocation method in the process of costs calculation. In the environment of nowadays companies, often taking very complex organisational forms, the existence of service departments becomes of great importance. Although, as far as management accounting processes are concerned, which lead to identifying the product cost, the service departments’ costs come out to be of minor importance. This article means to prove that the service departments’ costs and their reliable settlement are a desirable source of information about the products. This work consists of two parts. First of them features theoretical considerations and a critical analy-sis of subject literature. In the latter part, the service departments’ costs calculation will be presented, basing on recipro-cal services in a production enterprise from chemical industry.

  8. An evaluation of alternate production methods for Pu-238 general purpose heat source pellets

    Energy Technology Data Exchange (ETDEWEB)

    Mark Borland; Steve Frank

    2009-06-01

    For the past half century, the National Aeronautics and Space Administration (NASA) has used Radioisotope Thermoelectric Generators (RTG) to power deep space satellites. Fabricating heat sources for RTGs, specifically General Purpose Heat Sources (GPHSs), has remained essentially unchanged since their development in the 1970s. Meanwhile, 30 years of technological advancements have been made in the applicable fields of chemistry, manufacturing and control systems. This paper evaluates alternative processes that could be used to produce Pu 238 fueled heat sources. Specifically, this paper discusses the production of the plutonium-oxide granules, which are the input stream to the ceramic pressing and sintering processes. Alternate chemical processes are compared to current methods to determine if alternative fabrication processes could reduce the hazards, especially the production of respirable fines, while producing an equivalent GPHS product.

  9. Novel Computational Methods that Facilitate Development of Cyanofactories for Free Fatty Acid Production

    KAUST Repository

    Motwalli, Olaa Amin

    2017-05-28

    Finding a source from which high-energy-density biofuels can be derived at an industrial scale has become an urgent challenge for renewable energy production. Some microorganisms can produce free fatty acids (FFA) as precursors towards such high-energy-density biofuels. In particular, photosynthetic cyanobacteria are capable of directly converting carbon dioxide into FFA. However, current engineered strains need several rounds of engineering to reach the level of FFA production for it to be commercially viable. Thus, new chassis strains that require less engineering are needed. Although more than 140 cyanobacterial genomes are sequenced, the natural potential of these strains for FFA production and excretion has not been systematically estimated. In relation to the above-mentioned problems, we developed the first in silico screening method (FFASC) that evaluates the cyanobacterial strains’ potential for FFA production based on the strains’ proteome, which for the first time allows non-experimental selection of the most promising chassis for cyanofactories. The solution is based on the original problem formulation, optimization and ranking. To provide developers and researchers easy means for evaluation and assessment of the cyanobacterial strains potential for production of FFA, we developed the BioPS platform. In addition to being able to compare capacity for FFA production of any novel strain against 140 pre-valuate strains, BioPS can be used to explore characteristics and assessment rules in play for an individual strain. This is the first tool of this type developed. Finally, we developed a novel generic in silico method (PathDES) for ranking and selection of the most suitable pathways / sets of metabolic reactions, which suggests genetic modifications for improved metabolic productivity. The method heavily relies on optimization and integration of disparate information in a novel manner. It has been successfully used in connection with FFASC for design of

  10. Enhancement of fermentative hydrogen production from green algal biomass of Thermotoga neapolitana by various pretreatment methods

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Tam-Anh D.; Kim, Kyoung-Rok; Nguyen, Minh-Thu; Sim, Sang Jun [Department of Chemical Engineering, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of); Kim, Mi Sun [Bioenergy Research Center, Korea Institute of Energy Research, Daejeon 305-343 (Korea, Republic of); Kim, Donhue [Department of Biochemical Engineering, Dongyang Mirae College, Seoul 152-714 (Korea, Republic of)

    2010-12-15

    Biomass of the green algae has been recently an attractive feedstock source for bio-fuel production because the algal carbohydrates can be derived from atmospheric CO{sub 2} and their harvesting methods are simple. We utilized the accumulated starch in the green alga Chlamydomonas reinhardtii as the sole substrate for fermentative hydrogen (H{sub 2}) production by the hyperthermophilic eubacterium Thermotoga neapolitana. Because of possessing amylase activity, the bacterium could directly ferment H{sub 2} from algal starch with H{sub 2} yield of 1.8-2.2 mol H{sub 2}/mol glucose and the total accumulated H{sub 2} level from 43 to 49% (v/v) of the gas headspace in the closed culture bottle depending on various algal cell-wall disruption methods concluding sonication or methanol exposure. Attempting to enhance the H{sub 2} production, two pretreatment methods using the heat-HCl treatment and enzymatic hydrolysis were applied on algal biomass before using it as substrate for H{sub 2} fermentation. Cultivation with starch pretreated by 1.5% HCl at 121 C for 20 min showed the total accumulative H{sub 2} yield of 58% (v/v). In other approach, enzymatic digestion of starch by thermostable {alpha}-amylase (Termamyl) applied in the SHF process significantly enhanced the H{sub 2} productivity of the bacterium to 64% (v/v) of total accumulated H{sub 2} level and a H{sub 2} yield of 2.5 mol H{sub 2}/mol glucose. Our results demonstrated that direct H{sub 2} fermentation from algal biomass is more desirably potential because one bacterial cultivation step was required that meets the cost-savings, environmental friendly and simplicity of H{sub 2} production. (author)

  11. A method for energy optimization and product quality improvement in manufacturing processes

    Energy Technology Data Exchange (ETDEWEB)

    Abou Khalil, Bachir; Berthou, Marc; Perrotin, Thomas [EDF R and D Les Renardieres Departement Eco-efficacite et Procedes Industriels (France); Clodic, Denis [Ecole des Mines de Paris, Centre Energetique et Procedes (France)

    2007-07-01

    Manufacturing processes are diverse by nature. Consequently, energy efficiency of each process requires a specific analysis leading to significant costs, SMEs (Small and Medium-sized-Enterprises) cannot always sustain such costs.The present paper introduces a method for Energy Optimisation of manufacturing processes and product quality improvement during manufacturing. This innovative method is based on a 4-step analysis that allows to rapidly identifying the potential energy savings in industrial processes. The 4-step method consists in: (1) the process definition, (2) the analysis of the detailed synopsis of production lines (considering energy and mass fluxes), (3) the analysis of energy consumptions and production volumes, and (4) energy efficiency assessment by identification of energy savings and technical option proposals.The first step is based on the preliminary expertise of the considered process. Process efficiency is analysed based on the theoretical minimum energy requirement, leading to the identification of the best available technologies (BATs) for the considered process, and the optimal energy efficiency. For the second and third steps, specific data of the process are collected. The process energy consumption and the production information are obtained from the production manager. When needed, measurements could be performed to complete the energy and mass balances. The actual energy efficiency of the manufacturing process is then calculated.The fourth step consists in the comparison of the different energy ratios. Based on these ratios and on the knowledge of the actual process, energy savings are evaluated, technical solutions for energy efficiency improvement are proposed and first economic analysis is carried out.

  12. Stability-indicating methods for the determination of racecadotril in the presence of its degradation products.

    Science.gov (United States)

    Mohamed, Afaf O; Fouad, Manal M; Hasan, Mona M; Abdel Razeq, Sawsan A; Elsherif, Zeinab A

    2009-12-01

    Three stability-indicating methods were developed for the determination of racecadotril (RCT) in the presence of its alkaline degradation products. The first was an HPLC method in which efficient chromatographic separation was achieved on a C18 analytical column and a mobile phase of acetonitrile-methanol-water-acetic acid (52:28:20:0.1, v/v/v/v). Linearity was obtained in the range of 4-40 microg/mL with mean accuracy of 99.5 +/- 0.88%. The second method was a densitometric evaluation of thin-layer chromatograms of the drug using a mobile phase of isopropanol-ammonia (33%)-n-hexane (9:0.5:20, v/v/v). The chromatograms were scanned at 232 nm, a wavelength at which RCT can be readily separated from its degradation products and determined in the range of 2-20 microg per spot with mean accuracy of 99.5 +/- 0.56%. The third method is based on the use of first-derivative spectrophotometry (D1) at 240 nm, and the drug was determined in the range of 5-40 microg/mL with mean accuracy of 99.2 +/- 1.02%. The three methods provided satisfactory recovery of the intact drug (100.8 +/- 0.82, 100.4 +/- 0.55, and 99.9 +/- 0.72%, respectively) in the presence of up to 90% of its degradation products. Determination was also successful when analyzing RCT in a formulation in the form of acetorphan packets. Results were statistically analyzed and found to be in accordance with those given by a reported method.

  13. Estimation of graphite dust production in ITER TBM using finite element method

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Ji-Ho, E-mail: jhkang@kaeri.re.kr [Korea Atomic Energy Research Institute, 989-111, Daekeok-Daero, Yuseong-Gu, Daejeon 305-353 (Korea, Republic of); Kim, Eung Seon [Korea Atomic Energy Research Institute, 989-111, Daekeok-Daero, Yuseong-Gu, Daejeon 305-353 (Korea, Republic of); Ahn, Mu-Young; Lee, Youngmin; Park, Yi-Hyun; Cho, Seungyon [National Fusion Research Institute, 169-148, Gwahak-ro, Yuseong-gu, Daejeon (Korea, Republic of)

    2015-12-15

    Highlights: • Graphite dust production was estimated for the Korean Helium Cooled Ceramic Reflector. • Wear amount was calculated by Archard model using finite element analysis results. • Life time estimation of graphite dust production was done. - Abstract: In this study, an estimation method of graphite dust production in the pebble-bed type reflector region of the Korean Helium Cooled Ceramic Reflector (HCCR) Test Blanket Module (TBM) of the International Thermonuclear Experimental Reactor (ITER) project using Finite Element Method (FEM) was proposed and the total amount of dust production was calculated. A unit-cell model of uniformly arranged pebbles was defined with thermal and mechanical loadings. A commercial FEM program, Abaqus V6.10, was used to model and solve the stress field under multiple contact constraints between pebbles in the unit-cell. Resultant normal contact forces and slip distances on the contact points were applied into the Archard adhesive wear model to calculate the amount of graphite dust. The Finite Element (FE) analysis was repeated at 27 unit-cell locations chosen to form an interpolated dust density function for the entire region of the reflector. The dust production calculation was extended to the life time of the HCCR and the total graphite dust production was estimated to 0.279 g at the end of the life time with the maximum graphite dust density of 0.149 μg/mm{sup 3}. The dust explosion could be a safety issue with the calculated dust density level and it requires that an appropriate maintenance to remove sufficient amount of graphite dust regularly to prevent the possibility of dust explosion.

  14. The Use of Nonparametric Kernel Regression Methods in Econometric Production Analysis

    DEFF Research Database (Denmark)

    Czekaj, Tomasz Gerard

    This PhD thesis addresses one of the fundamental problems in applied econometric analysis, namely the econometric estimation of regression functions. The conventional approach to regression analysis is the parametric approach, which requires the researcher to specify the form of the regression...... to avoid this problem. The main objective is to investigate the applicability of the nonparametric kernel regression method in applied production analysis. The focus of the empirical analyses included in this thesis is the agricultural sector in Poland. Data on Polish farms are used to investigate...... practically and politically relevant problems and to illustrate how nonparametric regression methods can be used in applied microeconomic production analysis both in panel data and cross-section data settings. The thesis consists of four papers. The first paper addresses problems of parametric...

  15. Design Analysis Method for Multidisciplinary Complex Product using SysML

    Directory of Open Access Journals (Sweden)

    Liu Jihong

    2017-01-01

    Full Text Available In the design of multidisciplinary complex products, model-based systems engineering methods are widely used. However, the methodologies only contain only modeling order and simple analysis steps, and lack integrated design analysis methods supporting the whole process. In order to solve the problem, a conceptual design analysis method with integrating modern design methods has been proposed. First, based on the requirement analysis of the quantization matrix, the user’s needs are quantitatively evaluated and translated to system requirements. Then, by the function decomposition of the function knowledge base, the total function is semi-automatically decomposed into the predefined atomic function. The function is matched into predefined structure through the behaviour layer using function-structure mapping based on the interface matching. Finally based on design structure matrix (DSM, the structure reorganization is completed. The process of analysis is implemented with SysML, and illustrated through an aircraft air conditioning system for the system validation.

  16. Optimization of mass-production conditions for tritium breeder pebbles based on slurry droplet wetting method

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yi-Hyun, E-mail: yhpark@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Min, Kyung-Mi; Ahn, Mu-Young; Cho, Seungyon; Lee, Young-Min [National Fusion Research Institute, Daejeon (Korea, Republic of); Park, Sang-Jin; Danish, Rehan; Lim, Chul-Hwan; Jo, Yong-Dae [IVT Co., Ltd., Daegu (Korea, Republic of)

    2016-11-01

    Highlights: • An automatic dispensing system was developed to improve uniformity and production rate of breeder pebbles. • The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. • The optimization of dispensing and sintering conditions for the mass-production of Li{sub 2}TiO{sub 3} pebble was conducted. • Integrity of Li{sub 2}TiO{sub 3} pebble was able to be ensured during mass-production process, especially during batch process. - Abstract: Lithium metatitanate (Li{sub 2}TiO{sub 3}) is being considered as tritium breeding material for solid-type breeding blanket, which are used in pebble-bed form. The total amount of Li{sub 2}TiO{sub 3} pebbles in Helium Cooled Ceramic Reflector (HCCR) Test Blanket Module (TBM) is approximately 80 kg. Furthermore, DEMO reactor requires a great deal of breeder pebbles. Therefore, the development of mass-production system for breeder pebbles is necessary. The slurry droplet wetting method was adopted in the mass-production process for Li{sub 2}TiO{sub 3} pebbles, which had been developed in Korea. In this method, an automatic slurry dispensing system is one of the key apparatuses because the uniformity of pebbles and production rate are able to be improved. The system was successfully manufactured, which was consisted of a dispensing unit for instillation of Li{sub 2}TiO{sub 3} slurry, a glycerin bath for hardening of droplets, and an automatic maintaining unit for constant distance between syringe needle and glycerin surface. The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. In this study, it was investigated that the effect of dispensing and sintering conditions on the mass-production of Li{sub 2}TiO{sub 3} pebbles.

  17. Development of real-time PCR methods to quantify patulin-producing molds in food products.

    Science.gov (United States)

    Rodríguez, Alicia; Luque, M Isabel; Andrade, María J; Rodríguez, Mar; Asensio, Miguel A; Córdoba, Juan J

    2011-09-01

    Patulin is a mycotoxin produced by different Penicillium and Aspergillus strains isolated from food products. To improve food safety, the presence of patulin-producing molds in foods should be quantified. In the present work, two real-time (RTi) PCR protocols based on SYBR Green and TaqMan were developed. Thirty four patulin producers and 28 non-producers strains belonging to different species usually reported in food products were used. The patulin production was tested by mycellar electrokinetic capillary electrophoresis (MECE) and high-pressure liquid chromatography-mass spectrometry (HPLC-MS). A primer pair F-idhtrb/R-idhtrb and the probe IDHprobe were designed from the isoepoxydon dehydrogenase (idh) gene, involved in patulin biosynthesis. The functionality of the developed method was demonstrated by the high linear relationship of the standard curves constructed with the idh gene copy number and Ct values for the different patulin producers tested. The ability to quantify patulin producers of the developed SYBR Green and TaqMan assays in artificially inoculated food samples was successful, with a minimum threshold of 10 conidia g(-1) per reaction. The developed methods quantified with high efficiency fungal load in foods. These RTi-PCR protocols, are proposed to be used to quantify patulin-producing molds in food products and to prevent patulin from entering the food chain. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Adulteration of Ginkgo biloba products and a simple method to improve its detection.

    Science.gov (United States)

    Wohlmuth, Hans; Savage, Kate; Dowell, Ashley; Mouatt, Peter

    2014-05-15

    Extracts of ginkgo (Ginkgo biloba) leaf are widely available worldwide in herbal medicinal products, dietary supplements, botanicals and complementary medicines, and several pharmacopoeias contain monographs for ginkgo leaf, leaf extract and finished products. Being a high-value botanical commodity, ginkgo extracts may be the subject of economically motivated adulteration. We analysed eight ginkgo leaf retail products purchased in Australia and Denmark and found compelling evidence of adulteration with flavonol aglycones in three of these. The same three products also contained genistein, an isoflavone that does not occur in ginkgo leaf. Although the United States Pharmacopeia - National Formulary (USP-NF) and the British and European Pharmacopoeias stipulate a required range for flavonol glycosides in ginkgo extract, the prescribed assays quantify flavonol aglycones. This means that these pharmacopoeial methods are not capable of detecting adulteration of ginkgo extract with free flavonol aglycones. We propose a simple modification of the USP-NF method that addresses this problem: by assaying for flavonol aglycones pre and post hydrolysis the content of flavonol glycosides can be accurately estimated via a simple calculation. We also recommend a maximum limit be set for free flavonol aglycones in ginkgo extract. Copyright © 2014 Elsevier GmbH. All rights reserved.

  19. Effects of processing methods on nutrient and antinutrient composition of yellow yam (Dioscorea cayenensis) products.

    Science.gov (United States)

    Adepoju, Oladejo Thomas; Boyejo, Oluwatosin; Adeniji, Paulina Olufunke

    2018-01-01

    There is dearth of documented information on nutrient retention of Dioscorea cayenensis products. This study was carried out to evaluate effects of processing methods on nutrient and antinutrient retention of yellow yam products. Fresh Dioscorea cayenensis tubers were purchased from Bodija market in Ibadan, peeled, cut into small pieces, divided into nine portions. One portion was treated as raw sample, and others processed into local delicacies. All nine samples were analysed for proximate, mineral, vitamin and antinutrient composition using AOAC methods. Data were analysed using ANOVA at p=0.05. Raw yam contained 66.79g moisture, 2.62g crude protein, 0.27g lipid, 0.17g fibre, 0.63g ash, 29.69g carbohydrates, 262.30mg potassium, 61.53mg magnesium, 0.79mg iron, 0.39mg zinc, and yielded 108.26kcal energy with insignificant vitamin content/100g edible portion. Processing significantly improved macronutrients and energy content with significant reduction in all antinutrients of products (p<0.05). The yam products can serve as staple source of energy to consumers. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. A method to assess safety and resilience in radiopharmaceuticals production process.

    Science.gov (United States)

    Grecco, Cláudio H S; Vidal, Mario C R; Santos, Isaac J A L; Carvalho, Paulo V R

    2012-01-01

    Radiopharmaceuticals are radiation-emitting substances used in medicine for radiotherapy and imaging diagnosis. A Research Institute, located in Rio de Janeiro, produces three radiopharmaceuticals: the sodium iodate is used in the diagnosis of thyroid dysfunctions, the meta-iodo-benzylguanidine is used in the diagnosis of cardiac diseases, and the fluordesoxyglucose is used in diagnosis in cardiology, oncology, neurology and neuropsychiatry. This paper presents a method to access safety and resilience in radiopharmaceuticals production processes. The method uses resilience indicators in order to proactively evaluate and manage the safety.

  1. Estimation of the Accuracy of Method for Quantitative Determination of Volatile Compounds in Alcohol Products

    CERN Document Server

    Charepitsa, S V; Zadreyko, Y V; Sytova, S N

    2016-01-01

    Results of the estimation of the precision for determination volatile compounds in alcohol-containing products by gas chromatography: acetaldehyde, methyl acetate, ethyl acetate, methanol, isopropyl alcohol, propyl alcohol, isobutyl alcohol, butyl alcohol, isoamyl alcohol are presented. To determine the accuracy, measurements were planned in accordance with ISO 5725 and held at the gas chromatograph Crystal-5000. Standard deviation of repeatability, intermediate precision and their limits are derived from obtained experimental data. The uncertainty of the measurements was calculated on the base of an "empirical" method. The obtained values of accuracy indicate that the developed method allows measurement uncertainty extended from 2 to 20% depending on the analyzed compound and measured concentration.

  2. Analyses of Dynamics in Dairy Products and Identification of Lactic Acid Bacteria Population by Molecular Methods

    Directory of Open Access Journals (Sweden)

    Aytül Sofu

    2017-01-01

    Full Text Available Lactic acid bacteria (LAB with different ecological niches are widely seen in fermented meat, vegetables, dairy products and cereals as well as in fermented beverages. Lactic acid bacteria are the most important group of bacteria in dairy industry due to their probiotic characteristics and fermentation agents as starter culture. In the taxonomy of the lactic acid bacteria; by means of rep-PCR, which is the analysis of repetitive sequences that are based on 16S ribosomal RNA (rRNA gene sequence, it is possible to conduct structural microbial community analyses such as Restriction Fragment Length Polymorphism (RFLP analysis of DNA fragments of different sizes cut with enzymes, Random Amplified Polymorphic DNA (RAPD polymorphic DNA amplified randomly at low temperatures and Amplified Fragment-Length Polymorphism (AFLP-PCR of cut genomic DNA. Besides, in the recent years, non-culture-based molecular methods such as Pulse Field Gel Electrophoresis (PFGE, Denaturing Gradient Gel Electrophoresis (DGGE, Thermal Gradient Gel Electrophoresis (TGGE, and Fluorescence In-situ Hybridization (FISH have replaced classical methods once used for the identification of LAB. Identification of lactic acid bacteria culture independent regardless of the method will be one of the most important methods used in the future pyrosequencing as a Next Generation Sequencing (NGS techniques. This paper reviews molecular-method based studies conducted on the identification of LAB species in dairy products.

  3. Rapid detection of carbapenemase production in Enterobacteriaceae using a modified paper strip Carba NP method.

    Science.gov (United States)

    Ho, Pak-Leung; Wang, Ya; Tse, Cindy Wing-Sze; Fung, Kitty Sau-Chun; Cheng, Vincent Ch-Chung; Lee, Rodney; To, Wing-Kin; Lai, Raymond Wai-Man; Luk, Wei-Kwang; Que, Tak-Lun; Tsang, Dominic Ngai-Chong

    2017-10-25

    Rapid and accurate detection of carbapenemase-producing Enterobacteriaceae (CPE) is important for preventing their spread in healthcare settings. We compared the performance of the Carba NP test using the CLSI tube method with that using a modified paper strip method for detection of carbapenemase in 390 Enterobacteriaceae isolates. The isolates were identified by Hong Kong's carbapenem-resistant Enterobacteriaceae surveillance program in 2016 and comprised 213 CPE and 177 carbapenemase-negative Enterobacteriaceae Molecular genotype was used as the reference. Test results were read at different time points for the CLSI method (1 min, 5 min, 1 h and 2 h) and strip method (1 min, 5 min). The strip CNP and CLSI CNP tests correctly detect carbapenemase production in 93% and 93% KPC producers, 100% and 38% IMI producers, 94% and 85% IMP producers, 98% and 90% NDM producers, and, 29% and 12% OXA producers, respectively. Overall, the strip method has superior sensitivity than the CLSI method (86% vs. 75%, respectively, P NP test using the modified strip method has a higher sensitivity and a shorter assay time than using the CLSI tube method. Copyright © 2017 American Society for Microbiology.

  4. Method for conversion of carbohydrate polymers to value-added chemical products

    Science.gov (United States)

    Zhang, Zongchao C [Norwood, NJ; Brown, Heather M [Kennewick, WA; Su, Yu [Richland, WA

    2012-02-07

    Methods are described for conversion of carbohydrate polymers in ionic liquids, including cellulose, that yield value-added chemicals including, e.g., glucose and 5-hydroxylmethylfurfural (HMF) at temperatures below 120.degree. C. Catalyst compositions that include various mixed metal halides are described that are selective for specified products with yields, e.g., of up to about 56% in a single step process.

  5. Fabrication Method for Series Production of Sheet Metal Parts with Integrated Piezoelectric Transducers

    OpenAIRE

    Nestler, Matthias; Drossel, Welf-Guntram; Hensel, Sebastian; Müller, Roland

    2014-01-01

    The paper presents a high volume compatible production method for the fabrication of sheet metal parts with integrated piezoelectric transducers. The functionality of the integrated piezomodule is shown on a wing assembly, consisting of two sheet metals shaped with roll bending and three point bending operations. The stimulation of the structure is performed with a shaker, the reduction of the acoustic noise was realized with the integrated piezomodule and monitored with vibrometer measuremen...

  6. An inventory of methods suitable to assess additive-induced characterising flavours of tobacco products.

    Science.gov (United States)

    Talhout, Reinskje; van de Nobelen, Suzanne; Kienhuis, Anne S

    2016-04-01

    Products with strong non-tobacco flavours are popular among young people, and facilitate smoking initiation. Similar to the U.S. Food and Drug Administration Tobacco Control Act, the new European Tobacco Product Directive (TPD) prohibits cigarettes and roll-your-own tobacco with a characterising flavour other than tobacco. However, no methods are prescribed or operational to assess characterising flavours. This is the first study to identify, review and synthesize the existing peer-reviewed and tobacco industry literature in order to provide an inventory of methods suitable to assess characterising flavours. Authors gathered key empirical and theoretical papers examining methods suitable to assess characterising flavours. Scientific literature databases (PubMed and Scopus) and tobacco industry documents were searched, based on several keyword combinations. Inclusion criteria were relevance for smoked tobacco products, and quality of data. The findings reveal that there is a wide variation in natural tobacco flavours. Flavour differences from natural tobacco can be described by both expert and consumer sensory panels. Most methods are based on smoking tests, but odour evaluation has also been reported. Chemical analysis can be used to identify and quantify levels of specific flavour additives in tobacco products. As flavour perception is subjective, and requires human assessment, sensory analysis in consumer or expert panel studies is necessitated. We recommend developing validated tests for descriptive sensory analysis in combination with chemical-analytical measurements. Testing a broad range of brands, including those with quite subtle characterizing flavours, will provide the concentration above which an additive will impart a characterising flavour. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  7. Evaluation of preservation methods for improving biogas production and enzymatic conversion yields of annual crops.

    Science.gov (United States)

    Pakarinen, Annukka; Maijala, Pekka; Jaakkola, Seija; Stoddard, Frederick L; Kymäläinen, Maritta; Viikari, Liisa

    2011-07-19

    The use of energy crops and agricultural residues is expected to increase to fulfil the legislative demands of bio-based components in transport fuels. Ensiling methods, adapted from the feed sector, are suitable storage methods to preserve fresh crops throughout the year for, for example, biogas production. Various preservation methods, namely ensiling with and without acid addition for whole crop maize, fibre hemp and faba bean were investigated. For the drier fibre hemp, alkaline urea treatment was studied as well. These treatments were also explored as mild pretreatment methods to improve the disassembly and hydrolysis of these lignocellulosic substrates. The investigated storage treatments increased the availability of the substrates for biogas production from hemp and in most cases from whole maize but not from faba bean. Ensiling of hemp, without or with addition of formic acid, increased methane production by more than 50% compared to fresh hemp. Ensiling resulted in substantially increased methane yields also from maize, and the use of formic acid in ensiling of maize further enhanced methane yields by 16%, as compared with fresh maize. Ensiled faba bean, in contrast, yielded somewhat less methane than the fresh material. Acidic additives preserved and even increased the amount of the valuable water-soluble carbohydrates during storage, which affected most significantly the enzymatic hydrolysis yield of maize. However, preservation without additives decreased the enzymatic hydrolysis yield especially in maize, due to its high content of soluble sugars that were already converted to acids during storage. Urea-based preservation significantly increased the enzymatic hydrolysability of hemp. Hemp, preserved with urea, produced the highest carbohydrate increase of 46% in enzymatic hydrolysis as compared to the fresh material. Alkaline pretreatment conditions of hemp improved also the methane yields. The results of the present work show that ensiling and

  8. Evaluation of preservation methods for improving biogas production and enzymatic conversion yields of annual crops

    Directory of Open Access Journals (Sweden)

    Stoddard Frederick L

    2011-07-01

    Full Text Available Abstract Background The use of energy crops and agricultural residues is expected to increase to fulfil the legislative demands of bio-based components in transport fuels. Ensiling methods, adapted from the feed sector, are suitable storage methods to preserve fresh crops throughout the year for, for example, biogas production. Various preservation methods, namely ensiling with and without acid addition for whole crop maize, fibre hemp and faba bean were investigated. For the drier fibre hemp, alkaline urea treatment was studied as well. These treatments were also explored as mild pretreatment methods to improve the disassembly and hydrolysis of these lignocellulosic substrates. Results The investigated storage treatments increased the availability of the substrates for biogas production from hemp and in most cases from whole maize but not from faba bean. Ensiling of hemp, without or with addition of formic acid, increased methane production by more than 50% compared to fresh hemp. Ensiling resulted in substantially increased methane yields also from maize, and the use of formic acid in ensiling of maize further enhanced methane yields by 16%, as compared with fresh maize. Ensiled faba bean, in contrast, yielded somewhat less methane than the fresh material. Acidic additives preserved and even increased the amount of the valuable water-soluble carbohydrates during storage, which affected most significantly the enzymatic hydrolysis yield of maize. However, preservation without additives decreased the enzymatic hydrolysis yield especially in maize, due to its high content of soluble sugars that were already converted to acids during storage. Urea-based preservation significantly increased the enzymatic hydrolysability of hemp. Hemp, preserved with urea, produced the highest carbohydrate increase of 46% in enzymatic hydrolysis as compared to the fresh material. Alkaline pretreatment conditions of hemp improved also the methane yields. Conclusions

  9. ECONOMETRIC PATTERNS AND METHODS USED FOR ANALYSIS OF TECHNOLOGICAL INNOVATIONS IN WORKSHOPS AND PRODUCTION DEPARTMENTS EQUIPPED WITH FLEXIBLE MANUFACTURING SYSTEMS

    OpenAIRE

    Ioan Constantin Dima; Mariana Man; Maria Nowicka-skowron; Iwona Grabara

    2011-01-01

    Pursuant to the analysis of the assessment method of the structures of the production process, in the construction of machines, we find that, due to the requirements of diversification of assortments and features of products, criteria of the quality level and work productivity, the reduction of fabrication costs, the structure of the production process develops continuously. Starting from workshops specialized on technological procedures, the structure developed onto production lines in a sol...

  10. Novel method for the determination of added annatto colour in extruded corn snack products.

    Science.gov (United States)

    de Oliveira Rios, A; Mercadante, A Z

    2004-02-01

    There is considerable interest in determining the added levels of the natural dye annatto in foods like snack products, particularly because they are mostly consumed by young people. The objective was to use response surface methodology to develop a new method to analyse annatto in extruded snacks. A pretreatment of the samples was necessary, digesting the ground sample with alpha-amylase at room temperature. The pigment was extracted by shaking with ethyl acetate at room temperature, eight extractions being necessary for completion extract the pigment. Lipids were removed by alkaline saponification. Under these conditions, 100% of the bixin was converted into norbixin, which was then quantified by high-performance liquid chromatography. The method had a mean recovery of 97% and a coefficient of variation for duplicate analysis of 1%. Using this method, of the 13 commercial samples analysed, a parmesan cheese-flavoured snack product showed the highest level of dye expressed as norbixin (15.5 mg kg(-1)), whilst other brands of onion-flavoured snack products had the lowest levels (0.7 and 0.4 mg kg(-1), respectively).

  11. Validation of a liquid chromatographic method for the pharmaceutical quality control of products containing elacridar

    Directory of Open Access Journals (Sweden)

    Emilia Sawicki

    2016-08-01

    Full Text Available Many anticancer drugs have an impaired bioavailability and poor brain penetration because they are substrates to drug efflux pumps such as P-glycoprotein and Breast Cancer Resistance Protein. Elacridar is a strong inhibitor of these two drug efflux pumps and therefore has great potential to improve oral absorption and brain penetration of many anticancer drugs. Currently, a clinical formulation of elacridar is unavailable and therefore the pharmaceutical development of a drug product is highly warranted. This also necessitates the availability of an analytical method for its quality control. A reverse-phase high-performance liquid chromatographic method with ultraviolet detection was developed for the pharmaceutical quality control of products containing elacridar as the active pharmaceutical ingredient. The analytical method was validated for linearity, accuracy, precision, selectivity, carry-over, stability of stock and reference solutions, stability of the final extract, stability-indicating capability and impurity testing. We found that elacridar is unstable in aqueous solutions that are exposed to light because a hydroxylation product of elacridar is formed. Therefore, sample solutions with elacridar must be protected from light.

  12. Fake Review Detection From a Product Review Using Modified Method of Iterative Computation Framework

    Directory of Open Access Journals (Sweden)

    Wahyuni Eka Dyar

    2016-01-01

    Full Text Available The rapid growth of the Internet influenced many of our daily activities. One of the very rapid growth area is ecommerce. Generally e-commerce provide facility for customers to write reviews related with its service. The existence of these reviews can be used as a source of information. For examples, companies can use it to make design decisions of their products or services, while potential customers can use it to decide either to buy or to use a product. Unfortunately, the importance of the review is misused by certain parties who tried to create fake reviews, both aimed at raising the popularity or to discredit the product. This research aims to detect fake reviews for a product by using the text and rating property from a review. In short, the proposed system (ICF++ will measure the honesty value of a review, the trustiness value of the reviewers and the reliability value of a product. The honesty value of a review will be measured by utilizing the text mining and opinion mining techniques. The result from the experiment shows that the proposed system has a better accuracy compared with the result from iterative computation framework (ICF method.

  13. The Optimum Production Method for Quality Improvement of Recycled Aggregates Using Sulfuric Acid and the Abrasion Method

    Directory of Open Access Journals (Sweden)

    Haseog Kim

    2016-07-01

    Full Text Available There has been increased deconstruction and demolition of reinforced concrete structures due to the aging of the structures and redevelopment of urban areas resulting in the generation of massive amounts of construction. The production volume of waste concrete is projected to increase rapidly over 100 million tons by 2020. However, due to the high cement paste content, recycled aggregates have low density and high absorption ratio. They are mostly used for land reclamation purposes with low added value instead of multiple approaches. This study was performed to determine an effective method to remove cement paste from recycled aggregates by using the abrasion and substituting the process water with acidic water. The aim of this study is to analyze the quality of the recycled fine aggregates produced by a complex method and investigate the optimum manufacturing conditions for recycled fine aggregates based on the design of experiment. The experimental parameters considered were water ratio, coarse aggregate ratio, and abrasion time and, as a result of the experiment, data concerning the properties of recycled sand were obtained. It was found that high-quality recycled fine aggregates can be obtained with 8.57 min of abrasion-crusher time and a recycled coarse aggregate ratio of over 1.5.

  14. Development of a Spectrophotometric Method for Monitoring Angiotensin-Converting Enzyme in Dairy Products

    Directory of Open Access Journals (Sweden)

    Julijana Tomovska*, S. Presilski, N. Gjorgievski, N. Tomovska1, M. S. Qureshi2 and N. P. Bozinovska3

    2013-01-01

    Full Text Available The angiotensin-converting enzyme (ACE regulates the levels of blood pressure through generation of angiotensin-II from angiotensin-I. It is of great importance to have a reliable and yet simple method for a quantitative determination ACE inhibitory peptides in whey of milk products. A rapid, simple, sensitive and accurate spectrophotometric kinetic method has been developed for determination of ACE inhibitory peptides, using competitive inhibition. Samples of dairy product from the market were used for the determination of ACE inhibitory peptides in whey. Holmquist’s kinetic method was used for determining ACE inhibitory activity in blood serum and Ronca-Testoni method was used for the determination of ACE inhibitory activity in whey. Enzymatic inhibition activity was determined using 0.8 mmol/L FAPGG (N-[3-(Furyl –Acryloyl]-L-Phenylalanyl Glycyl Glycyne as the substrate in 50 mmol/L Tris buffer at pH 8.2 at 37°C and a standard serum containing ACE. First, a solution of whey was mixed in a 1 to 10 ratio with serum (elevation containing high ACE activity. The enzymatic activity was determined by monitoring the decrease in absorbance at 340 nm as result of hydrolysis of the substrate. The concentration of ACE inhibitory peptides was determined from a standard curve of inhibitor concentration versus percent of ACE inhibition. The study suggests that the method possesses good reproducibility and accuracy. The linear range enabled determination of high enzymatic activity of ACE and all ACE inhibitory peptides from dairy products act as competitive inhibitors.

  15. Reflexion on linear regression trip production modelling method for ensuring good model quality

    Science.gov (United States)

    Suprayitno, Hitapriya; Ratnasari, Vita

    2017-11-01

    Transport Modelling is important. For certain cases, the conventional model still has to be used, in which having a good trip production model is capital. A good model can only be obtained from a good sample. Two of the basic principles of a good sampling is having a sample capable to represent the population characteristics and capable to produce an acceptable error at a certain confidence level. It seems that this principle is not yet quite understood and used in trip production modeling. Therefore, investigating the Trip Production Modelling practice in Indonesia and try to formulate a better modeling method for ensuring the Model Quality is necessary. This research result is presented as follows. Statistics knows a method to calculate span of prediction value at a certain confidence level for linear regression, which is called Confidence Interval of Predicted Value. The common modeling practice uses R2 as the principal quality measure, the sampling practice varies and not always conform to the sampling principles. An experiment indicates that small sample is already capable to give excellent R2 value and sample composition can significantly change the model. Hence, good R2 value, in fact, does not always mean good model quality. These lead to three basic ideas for ensuring good model quality, i.e. reformulating quality measure, calculation procedure, and sampling method. A quality measure is defined as having a good R2 value and a good Confidence Interval of Predicted Value. Calculation procedure must incorporate statistical calculation method and appropriate statistical tests needed. A good sampling method must incorporate random well distributed stratified sampling with a certain minimum number of samples. These three ideas need to be more developed and tested.

  16. Methods to estimate the transfer of contaminants into recycling products - A case study from Austria.

    Science.gov (United States)

    Knapp, Julika; Allesch, Astrid; Müller, Wolfgang; Bockreis, Anke

    2017-11-01

    Recycling of waste materials is desirable to reduce the consumption of limited primary resources, but also includes the risk of recycling unwanted, hazardous substances. In Austria, the legal framework demands secondary products must not present a higher risk than comparable products derived from primary resources. However, the act provides no definition on how to assess this risk potential. This paper describes the development of different quantitative and qualitative methods to estimate the transfer of contaminants in recycling processes. The quantitative methods comprise the comparison of concentrations of harmful substances in recycling products to corresponding primary products and to existing limit values. The developed evaluation matrix, which considers further aspects, allows for the assessment of the qualitative risk potential. The results show that, depending on the assessed waste fraction, particular contaminants can be critical. Their concentrations were higher than in comparable primary materials and did not comply with existing limit values. On the other hand, the results show that a long-term, well-established quality control system can assure compliance with the limit values. The results of the qualitative assessment obtained with the evaluation matrix support the results of the quantitative assessment. Therefore, the evaluation matrix can be suitable to quickly screen waste streams used for recycling to estimate their potential environmental and health risks. To prevent the transfer of contaminants into product cycles, improved data of relevant substances in secondary resources are necessary. In addition, regulations for material recycling are required to assure adequate quality control measures, including limit values. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Ball mill assisted rapid mechanochemical extraction method for natural products from plants.

    Science.gov (United States)

    Wang, Man; Bi, Wentao; Huang, Xiaohua; Chen, David Da Yong

    2016-06-03

    A ball mill assisted mechanochemical extraction method was developed to extract compounds of natural product (NP) from plant using ionic liquid (IL). A small volume ball mill, also known as PastPrep(®) Homogenizer, which is often used for high-speed lysis of biological samples and for other applications, was used to dramatically increase the speed, completeness and reproducibility of the extraction process at room temperature to preserve the chemical integrity of the extracted compounds. In this study, tanshinones were selected as target compounds to evaluate the performance of this extraction method. Factors affecting the extraction efficiency, such as the duration, IL concentration and solid/liquid ratio were systematically optimized using the response surface methodology. Under the optimized conditions, the described method was more efficient and much faster than the conventional extraction methods such as methanol based ultrasound assisted extraction (UAE) and heat reflux extraction (HRE) that consumes a lot more organic solvent. In addition, the natural products of interest were enriched by anion metathesis of ionic liquids, combining extraction and preconcentration in the same process. The extractant was analyzed by HPLC and LC-MS. The reproducibility (RSD, n=5), correlation coefficient (r(2)) of the calibration curve, and the limit of detection, were determined to be in the range of 4.7-5.2%, 0.9992-0.9995, and 20-51ng/mL, respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Adaptation Method Bligh & Dyer a Lipid Extraction of Colomb ian Microalgas Biodiesel Production for Third Generation

    Directory of Open Access Journals (Sweden)

    González Delgado Ángel

    2012-06-01

    Full Text Available In the biodiesel production process from microalgae, the cell disruption and lipid extraction stages are important for obtaining triglycerides that can be transesterified to biodiesel and glycerol. In this work, the Bligh & Dyer method was adapted for lipid extraction from native microalgae using organosolv pretreatment or acid hydrolysis as cell disruption mechanism for improve the extraction process. Chloroform-methanol-water are the solvents employed in the Bligh & Dyer extraction method. The microalgae species Botryococcus braunii, Nannocloropsis, Closterium, Guinardia y Amphiprora were employed for the experimental part. Adaptation of the method was found the best extraction conditions, these were: 1:20 biomass/solvent ratio, initial ratio solvents CHCl3:CH3OH:H2O (1:2:0, stirring conditions of 5000 rpm for 14 minutes and centrifuge of 3400 rpm for 15 minutes. The cell disruption mechanisms allowed to obtain extracts with high lipid content after performing the extraction with Bligh & Dyer method, but decreases significantly the total extraction yield. Finally, the fatty acids profiles showed that Botryococcus braunii specie contains higher acylglycerol percentage area suitable for the production of biodiesel.

  19. A practical method for extending the biuret assay to protein determination of corn-based products.

    Science.gov (United States)

    Liu, Zelong; Pan, Junhui

    2017-06-01

    A modified biuret method suitable for protein determination of corn-based products was developed by introducing a combination of an alkaline reagent with sodium dodecyl sulfate (reagent A) and heat treatments. The method was tested on seven corn-based samples. The results showed mostly good agreement (P>0.05) as compared to the Kjeldahl values. The proposed method was found to enhance the accuracy of prediction on zein content using bovine serum albumin as standard. Reagent A and sample treatment were proved to effectively improve protein solubilization for the thermally-dried corn-based products, e.g. corn gluten meal. The absorbance was stable for at least 1-h. Moreover, the whole measurement of protein content only needs 15-20min more than the traditional biuret assay, and can be performed in batches. The findings suggest that the proposed method could be a timesaving alternative for routine protein analyses in corn processing factories. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Validated methods for determination of yohimbine hydrochloride in the presence of its degradation products

    Directory of Open Access Journals (Sweden)

    M. Farouk

    2011-12-01

    Full Text Available Two simple, accurate and sensitive and techniques have been developed and validated for the determination of yohimbine hydrochloride in presence of its acid, alkaline and photo-degradates as stability-indicating studies. First spectrophotometric technique was adopted for the determination of the investigated drug in presence of degradation products, by the use of derivative and derivative ratio methods, respectively, while the second technique utilized a high-performance liquid chromatography for the determination of yohimbine hydrochloride in presence of its degradation products, as stability indicating method. The chromatographic separation was achieved isocratically by using a mobile phase of water and methanol in a ratio of 55:45 V/V containing 0.5% triethylamine. The analysis was carried out using C18 (4.6 × 150 mm, 5 μm at flow rate of 1.0 ml/min and UV detection at 270 nm. All the proposed methods were validated according to the International Conference on Harmonization (ICH guidelines and successfully applied for determination of the drug in pure form, in laboratory prepared mixtures and in pharmaceutical preparations. The obtained results were statistically compared to the official method of analysis for yohimbine hydrochloride and no significant differences were found.

  1. Hydrogen production from lignocellulosic biomass by two-step gasification method

    Energy Technology Data Exchange (ETDEWEB)

    Lee, In-Gu [Korea Institute of Energy Research (Korea, Republic of)

    2010-07-01

    Hydrogen can be produced from woody biomass by conventional gasification methods such as partial oxidation or steam gasification. Since these methods produce gas products with low content of hydrogen as well as high content of tar from gasification reactors, posttreatment processes including tar cracker and water-gas shift reaction process are usually necessary for obtaining clean hydrogen-rich gas from woody biomass. In this work, a twostep gasification method was experimentally studied as an alternative to the conventional methods. The first step of the gasification is the fast pyrolysis of biomass to obtain liquid-phase product (bio-oil) and the second step is to gasify the bio-oil to hydrogen-rich gas in supercritical water. The fast pyrolysis of woody biomass was carried out using a bench-scale fluidized-bed reactor. The gasification of bio-oil in supercritical water was performed using a continuous-flow reactor packed with catalyst. The effect of major reaction conditions such as temperature and catalyst on hydrogen yield will be discussed. (orig.)

  2. Influence of productivity and processing method on physicochemical characteristics of white button mushrooms in Brazil.

    Science.gov (United States)

    Zied, Diego Cunha; Penachio, Sara Maciel; Dias, Eustáquio Souza; de Almeida Minhoni, Marli Teixeira; Ferraz, Rafael Augusto; Vieites, Rogério Lopes

    2014-11-01

    The white button mushroom is the edible fungus most commonly cultivated and commercialized in Brazil and worldwide. This work assesses the productivity of the different strains ABI 07/06 and ABI 06/05 of Agaricus bisporus grown under the conditions normally employed by growers in the southeast of Brazil, and the influence of four different chemical conservation methods on the physicochemical characteristics and storage properties of the fruit bodies. The productivities of strains ABI 07/06 and ABI 06/05 of white button mushrooms were found to be comparable. The colorimetric characteristics and chemical compositions (fat, fiber and protein contents) of the mushroom strains were similar, and these parameters were not influenced significantly by the conservation processes. Texture was negatively affected by all processing methods employed. It was concluded that chemical methods of processing mushrooms were not fully effective and novel alternative technologies should be considered by mushroom processors in Brazil. Some methods of mushroom storage using chemicals such as sodium metabisulfite are harmful to the human organism, so processing using autoclaving may be the best form of conservation of canned mushrooms. © 2014 Society of Chemical Industry.

  3. Identifying and prioritizing customer requirements from tractor production by QFD method

    Directory of Open Access Journals (Sweden)

    H Taghizadeh

    2017-05-01

    Full Text Available Introduction Discovering and understanding customer needs and expectations are considered as important factors on customer satisfaction and play vital role to maintain the current activity among its competitors, proceeding and obtaining customer satisfaction which are critical factors to design a successful production; thus the successful organizations must meet their needs containing the quality of the products or services to customers. Quality Function Deployment (QFD is a technique for studying demands and needs of customers which is going to give more emphasis to the customer's interests in this way. The QFD method in general implemented various tools and methods for reaching qualitative goals; but the most important and the main tool of this method is the house of quality diagrams. The Analytic Hierarchy Process (AHP is a famous and common MADM method based on pair wise comparisons used for determining the priority of understudied factors in various studies until now. With considering effectiveness of QFD method to explicating customer's demands and obtaining customer satisfaction, generally, the researchers followed this question's suite and scientific answer: how can QFD explicate real demands and requirements of customers from tractor final production and what is the prioritization of these demands and requirements in view of customers. Accordingly, the aim of this study was to identify and prioritize the customer requirements of Massey Ferguson (MF 285 tractor production in Iran tractor manufacturing company with t- student statistical test, AHP and QFD methods. Materials and Methods Research method was descriptive and statistical population included all of the tractor customers of Tractor Manufacturing Company in Iran from March 2011 to March 2015. The statistical sample size was 171 which are determined with Cochran index. Moreover, 20 experts' opinion has been considered for determining product's technical requirements. Literature

  4. Comprehensive validation scheme for in situ fiber optics dissolution method for pharmaceutical drug product testing.

    Science.gov (United States)

    Mirza, Tahseen; Liu, Qian Julie; Vivilecchia, Richard; Joshi, Yatindra

    2009-03-01

    There has been a growing interest during the past decade in the use of fiber optics dissolution testing. Use of this novel technology is mainly confined to research and development laboratories. It has not yet emerged as a tool for end product release testing despite its ability to generate in situ results and efficiency improvement. One potential reason may be the lack of clear validation guidelines that can be applied for the assessment of suitability of fiber optics. This article describes a comprehensive validation scheme and development of a reliable, robust, reproducible and cost-effective dissolution test using fiber optics technology. The test was successfully applied for characterizing the dissolution behavior of a 40-mg immediate-release tablet dosage form that is under development at Novartis Pharmaceuticals, East Hanover, New Jersey. The method was validated for the following parameters: linearity, precision, accuracy, specificity, and robustness. In particular, robustness was evaluated in terms of probe sampling depth and probe orientation. The in situ fiber optic method was found to be comparable to the existing manual sampling dissolution method. Finally, the fiber optic dissolution test was successfully performed by different operators on different days, to further enhance the validity of the method. The results demonstrate that the fiber optics technology can be successfully validated for end product dissolution/release testing. (c) 2008 Wiley-Liss, Inc. and the American Pharmacists Association

  5. Promising ethical arguments for product differentiation in the organic food sector. A mixed methods research approach.

    Science.gov (United States)

    Zander, Katrin; Stolz, Hanna; Hamm, Ulrich

    2013-03-01

    Ethical consumerism is a growing trend worldwide. Ethical consumers' expectations are increasing and neither the Fairtrade nor the organic farming concept covers all the ethical concerns of consumers. Against this background the aim of this research is to elicit consumers' preferences regarding organic food with additional ethical attributes and their relevance at the market place. A mixed methods research approach was applied by combining an Information Display Matrix, Focus Group Discussions and Choice Experiments in five European countries. According to the results of the Information Display Matrix, 'higher animal welfare', 'local production' and 'fair producer prices' were preferred in all countries. These three attributes were discussed with Focus Groups in depth, using rather emotive ways of labelling. While the ranking of the attributes was the same, the emotive way of communicating these attributes was, for the most part, disliked by participants. The same attributes were then used in Choice Experiments, but with completely revised communication arguments. According to the results of the Focus Groups, the arguments were presented in a factual manner, using short and concise statements. In this research step, consumers in all countries except Austria gave priority to 'local production'. 'Higher animal welfare' and 'fair producer prices' turned out to be relevant for buying decisions only in Germany and Switzerland. According to our results, there is substantial potential for product differentiation in the organic sector through making use of production standards that exceed existing minimum regulations. The combination of different research methods in a mixed methods approach proved to be very helpful. The results of earlier research steps provided the basis from which to learn - findings could be applied in subsequent steps, and used to adjust and deepen the research design. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. Methods for Engineering Enterprise Management Based on the Inter-factor Productive-Economic Relations

    Directory of Open Access Journals (Sweden)

    O. A. Naydis

    2015-01-01

    Full Text Available The article analyzes the current state of engineering enterprises in the Russian Federation. It conducts a review and analysis of existing methods for business management using indicators to characterize enterprise activities by means of the scalars, functional dependencies of one factor value on the other (function one, wherein the magnitude of one factor value corresponds to a single magnitude of the other value - a dependent factor, as well as by means of data tables, and, as an example, by balance list and articulation statement used in accounting. The paper gives statements of need for taking into account the mutual influences and system interrelation of factors diversity and for special methods of their identification. The article is aimed at development of methods for business management of engineering enterprises taking into account a variety of factors and their interdependencies. The relevance of the issue stems from the fact that the analysis of existing methods of business management has shown that it is impossible to have the requested information about a considerable number of productive-economic factors in their system-based interrelation. There is a proposal for the management objects wherein multiple factors and their interactions are taken into consideration to be called inter-factor productive-economic relations (IPER. The paper presents the IPER-based structure of the business management system. It describes a method to identify controlled productive-economic factors and provides allocation and justification of the significant ones for the IPER control. Described methods of business management are distinguished by a large amount of control information, and data form rather complex structures. Therefore, it is proposed to use them in automatic control systems. The paper describes principles of information support for business management through binding IPER to organizational structures of the enterprise. It offers an

  7. Interlaboratory Study on the Determination of Crude Protein in Macaroni Products on JAS by Kjeldahl Method Using Copper Catalysts

    National Research Council Canada - National Science Library

    HAKODA, Akiko; II, Yusuke; SUZUKI, Tadanao; YASUI, Akemi

    2009-01-01

    The Kjeldahl method using copper catalysts for digestion was established as an analytical method for the determination of crude protein in macaroni products in the Japanese Agricultural Standard (JAS...

  8. Review of the Methods for Production of Spherical Ti and Ti Alloy Powder

    Science.gov (United States)

    Sun, Pei; Fang, Zhigang Zak; Zhang, Ying; Xia, Yang

    2017-10-01

    Spherical titanium alloy powder is an important raw material for near-net-shape fabrication via a powder metallurgy (PM) manufacturing route, as well as feedstock for powder injection molding, and additive manufacturing (AM). Nevertheless, the cost of Ti powder including spherical Ti alloy has been a major hurdle that prevented PM Ti from being adopted for a wide range of applications. Especially with the increasing importance of powder-bed based AM technologies, the demand for spherical Ti powder has brought renewed attention on properties and cost, as well as on powder-producing processes. The performance of Ti components manufactured from powder has a strong dependence on the quality of powder, and it is therefore crucial to understand the properties and production methods of powder. This article aims to provide a cursory review of the basic techniques of commercial and emerging methods for making spherical Ti powder. The advantages as well as limitations of different methods are discussed.

  9. A spectroscopic method of determining color of petroleum products using CIELab color space with LED illumination

    Science.gov (United States)

    Rodriguez, John D.; Comstock, Matthew; Auz, Bryan; Olmstead, Ty

    2017-02-01

    Color is an important metric for determining the quality of petroleum products, as it is a characteristic readily observed by operators and end users and can also be indicative of the degree of refinement of a petroleum product. There are two primary color standards covering a wide range of petroleum color in industry; ASTM D 156 (Saybolt Color Scale) and ASTM D 1500 (ASTM Color Scale). For highly refined petroleum products the industry uses the Saybolt color scale, ranging from 30 at the clearest to -16 at the darkest. Fuels that are darker in color than -16 on the Saybolt scale are tested using the ASTM Color scale, which ranges from 0.5 at the clearest to 8 at the darkest. As fuels age (increased time from the point of refinement), their color darkens because of oxidizing olefins, such as ethylene and propylene. Traditionally, this color scale is measured using a series of photodiodes and optical filters with a blackbody light source. The spectroscopic method described in this paper incorporates a white LED designed for maximizing color measurements. The spectra are processed using CIE 1931 color space, which is then converted into CIELab color space. Results using this method are accurate and repeatable.

  10. Germanium recovery from gasification fly ash: evaluation of end-products obtained by precipitation methods.

    Science.gov (United States)

    Arroyo, Fátima; Font, Oriol; Fernández-Pereira, Constantino; Querol, Xavier; Juan, Roberto; Ruiz, Carmen; Coca, Pilar

    2009-08-15

    In this study the purity of the germanium end-products obtained by two different precipitation methods carried out on germanium-bearing solutions was evaluated as a last step of a hydrometallurgy process for the recovery of this valuable element from the Puertollano Integrated Gasification Combined Cycle (IGCC) fly ash. Since H(2)S is produced as a by-product in the gas cleaning system of the Puertollano IGCC plant, precipitation of germanium as GeS(2) was tested by sulfiding the Ge-bearing solutions. The technological and hazardous issues that surround H(2)S handling conducted to investigate a novel precipitation procedure: precipitation as an organic complex by adding 1,2-dihydroxy benzene pyrocatechol (CAT) and cetyltrimethylammonium bromide (CTAB) to the Ge-bearing solutions. Relatively high purity Ge end-products (90 and 93% hexagonal-GeO(2) purity, respectively) were obtained by precipitating Ge from enriched solutions, as GeS(2) sulfiding the solutions with H(2)S, or as organic complex with CAT/CTAB mixtures and subsequent roasting of the precipitates. Both methods showed high efficiency (>99%) to precipitate selectively Ge using a single precipitation stage from germanium-bearing solutions.

  11. Validation of a novel sequential cultivation method for the production of enzymatic cocktails from Trichoderma strains.

    Science.gov (United States)

    Florencio, C; Cunha, F M; Badino, A C; Farinas, C S

    2015-02-01

    The development of new cost-effective bioprocesses for the production of cellulolytic enzymes is needed in order to ensure that the conversion of biomass becomes economically viable. The aim of this study was to determine whether a novel sequential solid-state and submerged fermentation method (SF) could be validated for different strains of the Trichoderma genus. Cultivation of the Trichoderma reesei Rut-C30 reference strain under SF using sugarcane bagasse as substrate was shown to be favorable for endoglucanase (EGase) production, resulting in up to 4.2-fold improvement compared with conventional submerged fermentation. Characterization of the enzymes in terms of the optimum pH and temperature for EGase activity and comparison of the hydrolysis profiles obtained using a synthetic substrate did not reveal any qualitative differences among the different cultivation conditions investigated. However, the thermostability of the EGase was influenced by the type of carbon source and cultivation system. All three strains of Trichoderma tested (T. reesei Rut-C30, Trichoderma harzianum, and Trichoderma sp INPA 666) achieved higher enzymatic productivity when cultivated under SF, hence validating the proposed SF method for use with different Trichoderma strains. The results suggest that this bioprocess configuration is a very promising development for the cellulosic biofuels industry.

  12. Approximate tensor-product preconditioners for very high order discontinuous Galerkin methods

    Science.gov (United States)

    Pazner, Will; Persson, Per-Olof

    2018-02-01

    In this paper, we develop a new tensor-product based preconditioner for discontinuous Galerkin methods with polynomial degrees higher than those typically employed. This preconditioner uses an automatic, purely algebraic method to approximate the exact block Jacobi preconditioner by Kronecker products of several small, one-dimensional matrices. Traditional matrix-based preconditioners require O (p2d) storage and O (p3d) computational work, where p is the degree of basis polynomials used, and d is the spatial dimension. Our SVD-based tensor-product preconditioner requires O (p d + 1) storage, O (p d + 1) work in two spatial dimensions, and O (p d + 2) work in three spatial dimensions. Combined with a matrix-free Newton-Krylov solver, these preconditioners allow for the solution of DG systems in linear time in p per degree of freedom in 2D, and reduce the computational complexity from O (p9) to O (p5) in 3D. Numerical results are shown in 2D and 3D for the advection, Euler, and Navier-Stokes equations, using polynomials of degree up to p = 30. For many test cases, the preconditioner results in similar iteration counts when compared with the exact block Jacobi preconditioner, and performance is significantly improved for high polynomial degrees p.

  13. A Novel Method for High-Level Production of TEV Protease by Superfolder GFP Tag

    Directory of Open Access Journals (Sweden)

    Xudong Wu

    2009-01-01

    Full Text Available Because of its stringent sequence specificity, tobacco etch virus (TEV protease is widely used to remove fusion tags from recombinant proteins. Due to the poor solubility of TEV protease, many strategies have been employed to increase the expression level of this enzyme. In our work, we introduced a novel method to produce TEV protease by using visible superfolder green fluorescent protein (sfGFP as the fusion tag. The soluble production and catalytic activity of six variants of sfGFP-TEV was examined, and then the best variant was selected for large-scale production. After purified by Ni-NTA affinity chromatography and Q anion exchange chromatography, the best variant of sfGFP-TEV fusion protease was obtained with purity of over 98% and yield of over 320 mg per liter culture. The sfGFP-TEV had a similar catalytic activity to that of the original TEV protease. Our research showed a novel method of large-scale production of visible and functional TEV protease for structural genomics research and other applications.

  14. Research Progress of QuEChERS Extraction Method in Pesticide Residues Determination in Agricultural Products

    Directory of Open Access Journals (Sweden)

    GAO Yang

    2014-04-01

    Full Text Available Detection of pesticide residues in food has been a daunting challenge for its high impurities disturbances, low residual content, andmultitudinous inseparable impurities using traditional extraction methods. The requirements of sample pre-treatment has been raised due todiverse food contaminants, a wide variety of pesticides and its physicochemical properties and growing emergence of new pesticides. In recentyears, QuEChERS(quick, easy, cheap, effective, rugged and safe, a novel extraction method, has become a widely used new sample pretreat-ment technology at domestic and abroad for its quick, easy, cheap, effective, rugged and safe features. QuEChERS method has been widelyused in determining pesticides, pharmaceuticals, and veterinaries using gas or liquid chromatographic method. The article made a summaryabout the application of pesticide residue detection and method improvement of QuEChERS in various types of food and other animal/plant-agricultural products, and then the prospects of QuEChERS method for pesticide residues detection were proposed.

  15. Green and energy-efficient methods for the production of metallic nanoparticles

    Directory of Open Access Journals (Sweden)

    Mitra Naghdi

    2015-12-01

    Full Text Available In the last decade, researchers paid great attention to the concept of “Green Chemistry”, which aims at development of efficient methods for the synthesis of nanoparticles (NPs in terms of the least possible impact on human life and environment. Generally, several reagents including precursors, reducing agents, stabilizing agents and solvents are used for the production of NPs and in some cases, energy is needed to reach the optimum temperature for reduction. Therefore, to develop a green approach, researchers had the opportunity to investigate eco-friendly reagents and new energy transfer techniques. In order to substitute the harmful reagents with green ones, researchers worked on different types of saccharides, polyols, carboxylic acids, polyoxometalates and extracts of various plants that can play the role of reducers, stabilizers or solvents. Also, there are some reports on using ultraviolet (UV, gamma and microwave irradiation that are capable of reducing and provide uniform heating. According to the literature, it is possible to use green reagents and novel energy transfer techniques for production of NPs. However, these new synthesis routes should be optimized in terms of performance, cost, product quality (shape and size distribution and scale-up capability. This paper presents a review on most of the employed green reagents and new energy transfer techniques for the production of metallic NPs.

  16. User input in iterative design for prevention product development: leveraging interdisciplinary methods to optimize effectiveness.

    Science.gov (United States)

    Guthrie, Kate M; Rosen, Rochelle K; Vargas, Sara E; Guillen, Melissa; Steger, Arielle L; Getz, Melissa L; Smith, Kelley A; Ramirez, Jaime J; Kojic, Erna M

    2017-10-01

    The development of HIV-preventive topical vaginal microbicides has been challenged by a lack of sufficient adherence in later stage clinical trials to confidently evaluate effectiveness. This dilemma has highlighted the need to integrate translational research earlier in the drug development process, essentially applying behavioral science to facilitate the advances of basic science with respect to the uptake and use of biomedical prevention technologies. In the last several years, there has been an increasing recognition that the user experience, specifically the sensory experience, as well as the role of meaning-making elicited by those sensations, may play a more substantive role than previously thought. Importantly, the role of the user-their sensory perceptions, their judgements of those experiences, and their willingness to use a product-is critical in product uptake and consistent use post-marketing, ultimately realizing gains in global public health. Specifically, a successful prevention product requires an efficacious drug, an efficient drug delivery system, and an effective user. We present an integrated iterative drug development and user experience evaluation method to illustrate how user-centered formulation design can be iterated from the early stages of preclinical development to leverage the user experience. Integrating the user and their product experiences into the formulation design process may help optimize both the efficiency of drug delivery and the effectiveness of the user.

  17. Real-Time Shop-Floor Production Performance Analysis Method for the Internet of Manufacturing Things

    Directory of Open Access Journals (Sweden)

    Yingfeng Zhang

    2014-04-01

    Full Text Available Typical challenges that manufacturing enterprises are facing now are compounded by lack of timely, accurate, and consistent information of manufacturing resources. As a result, it is difficult to analyze the real-time production performance for the shop-floor. In this paper, the definition and overall architecture of the internet of manufacturing things is presented to provide a new paradigm by extending the techniques of internet of things (IoT to manufacturing field. Under this architecture, the real-time primitive events which occurred at different manufacturing things such as operators, machines, pallets, key materials, and so forth can be easily sensed. Based on these distributed primitive events, a critical event model is established to automatically analyze the real-time production performance. Here, the up-level production performance analysis is regarded as a series of critical events, and the real-time value of each critical event can be easily calculated according to the logical and sequence relationships among these multilevel events. Finally, a case study is used to illustrate how to apply the designed methods to analyze the real-time production performance.

  18. 76 FR 42729 - Certain Coenzyme Q10 Products and Methods of Making Same; Notice of Institution of Investigation...

    Science.gov (United States)

    2011-07-19

    ... COMMISSION Certain Coenzyme Q10 Products and Methods of Making Same; Notice of Institution of Investigation... importation, and the sale within the United States after importation of certain coenzyme Q10 products and... importation, or the sale within the United States after importation of certain coenzyme Q10 products and...

  19. The Use of Nonparametric Kernel Regression Methods in Econometric Production Analysis

    DEFF Research Database (Denmark)

    Czekaj, Tomasz Gerard

    This PhD thesis addresses one of the fundamental problems in applied econometric analysis, namely the econometric estimation of regression functions. The conventional approach to regression analysis is the parametric approach, which requires the researcher to specify the form of the regression...... function. However, the a priori specification of a functional form involves the risk of choosing one that is not similar to the “true” but unknown relationship between the regressors and the dependent variable. This problem, known as parametric misspecification, can result in biased parameter estimates...... and nonparametric estimations of production functions in order to evaluate the optimal firm size. The second paper discusses the use of parametric and nonparametric regression methods to estimate panel data regression models. The third paper analyses production risk, price uncertainty, and farmers' risk preferences...

  20. Advancement in shampoo (a dermal care product): preparation methods, patents and commercial utility.

    Science.gov (United States)

    Deeksha; Malviya, Rishabha; Sharma, Pramod K

    2014-01-01

    Shampoo is a cleaning aid for hair and is the most evolving beauty products in the present scenario. Today's shampoo products are of great importance as they provide cleaning of hair with the benefits of conditioning, smoothing and good health of hair i.e. dandruff, dirt, grease and lice free hair. Various types of shampoos depending upon function, nature of ingredient, and their special effects are elaborated in this study. Generally shampoos are evaluated in terms of physical appearance, detergency, surface tension, foam quality, pH, viscosity, and percent of solid content, flow property, dirt dispersion, cleaning action, stability and wetting time. The attention should be paid at its patent portion which attracts towards itself as it provides wide knowledge related to shampoo. This article reviews the various aspects of shampoo in terms of preparation methods, various patents and commercial value.

  1. A decision support system for the promotion of Employee in Plaza Asia Method Using Weighted Product

    Directory of Open Access Journals (Sweden)

    Egi Badar Sambani

    2016-06-01

    Full Text Available Decision-making in a company is important because decisions taken by managers is the result of a final thought to be carried out by employees. Asia is the largest mall Plaza sepriangan east, where the assessment process includes the promotion employee attendance, productivity (work, integrity (nature, skill (ability and loyalty (faithfulness. Method Using Weighted Product (WP can help in decision-making to determine the promotion of employees in the company, as well as the appraisal process more efficient so the store manager can determine employee promotions quickly. By using decision support system that has a database, employee data can be stored in the database. So that in case of errors in inputting can be corrected without having to re-enter the data. With the Decision Support System will address the issues raised in the Plaza Asia, so the promotion process will be faster.

  2. A Hierarchical Approach Using Machine Learning Methods in Solar Photovoltaic Energy Production Forecasting

    Directory of Open Access Journals (Sweden)

    Zhaoxuan Li

    2016-01-01

    Full Text Available We evaluate and compare two common methods, artificial neural networks (ANN and support vector regression (SVR, for predicting energy productions from a solar photovoltaic (PV system in Florida 15 min, 1 h and 24 h ahead of time. A hierarchical approach is proposed based on the machine learning algorithms tested. The production data used in this work corresponds to 15 min averaged power measurements collected from 2014. The accuracy of the model is determined using computing error statistics such as mean bias error (MBE, mean absolute error (MAE, root mean square error (RMSE, relative MBE (rMBE, mean percentage error (MPE and relative RMSE (rRMSE. This work provides findings on how forecasts from individual inverters will improve the total solar power generation forecast of the PV system.

  3. Approximate Method to Calculate Melting Time of Sludge-Like Cryogenic Product in Cylindrical Horizontal Tank

    Directory of Open Access Journals (Sweden)

    G. N. Tovarnykh

    2015-01-01

    Full Text Available The paper proposes an approximate method to calculate the melting time of the sludge-like cryogenic product in horizontal cylindrical tank with spherical bottoms during drainage storage. The problem to find where there is the liquid - clean slush interface taking into account the heat flows from the walls and the area of clean liquid. It is assumed that the area of sludge is isothermal and has a melting point of solids, sludge - clean liquid interface is flat, free surface of the liquid is stationary and has a saturation temperature at a given pressure. The temperature in the clean liquid is distributed linearly. These approximate relationships allow us to estimate the melting time of the sludge-like cryogenic product in tank without detailed calculation of temperature fields in clean liquid.

  4. ZnO nanoparticle catalysts for use in biodiesel production and method of making

    Science.gov (United States)

    Yan, Shuli; Salley, Steven O; Ng, K. Y. Simon

    2014-11-25

    A method of forming a biodiesel product and a heterogeneous catalyst system used to form said product that has a high tolerance for the presence of water and free fatty acids (FFA) in the oil feedstock is disclosed. This catalyst system may simultaneously catalyze both the esterification of FAA and the transesterification of triglycerides present in the oil feedstock. The catalyst system is comprised of a mixture of zinc oxide and a second metal oxide. The zinc oxide includes a mixture of amorphous zinc oxide and zinc oxide nanocrystals, the zinc nanocrystals having a mean grain size between about 20 and 80 nanometers with at least one of the nanocrystals including a mesopore having a diameter of about 5 to 15 nanometers. Preferably, the second metal oxide is a lanthanum oxide, the lanthanum oxide being selected as one from the group of La.sub.2CO.sub.5, LaOOH, and combinations or mixtures thereof.

  5. Comparison of different pretreatment methods for separation hemicellulose from straw during the lignocellulosic bioethanol production

    Science.gov (United States)

    Eisenhuber, Katharina; Krennhuber, Klaus; Steinmüller, Viktoria; Kahr, Heike; Jäger, Alexander

    2013-04-01

    The combustion of fossil fuels is responsible for 73% of carbon dioxide emissions into the atmosphere and consequently contributes to global warming. This fact has enormously increased the interest in the development of methods to reduce greenhouse gases. Therefore, the focus is on the production of biofuels from lignocellulosic agricultural residues. The feedstocks used for 2nd generation bioethanol production are lignocellulosic raw materials like different straw types or energy crops like miscanthus sinensis or arundo donax. Lignocellulose consists of hemicellulose (xylose and arabinose), which is bonded to cellulose (glucose) and lignin. Prior to an enzymatic hydrolysis of the polysaccharides and fermentation of the resulting sugars, the lignocelluloses must be pretreated to make the sugar polymers accessible to enzymes. A variety of pretreatment methods are described in the literature: thermophysical, acid-based and alkaline methods.In this study, we examined and compared the most important pretreatment methods: Steam explosion versus acid and alkaline pretreatment. Specific attention was paid to the mass balance, the recovery of C 5 sugars and consumption of chemicals needed for pretreatment. In lab scale experiments, wheat straw was either directly pretreated by steam explosion or by two different protocols. The straw was either soaked in sulfuric acid or in sodium hydroxide solution at different concentrations. For both methods, wheat straw was pretreated at 100°C for 30 minutes. Afterwards, the remaining straw was separated by vacuum filtration from the liquid fraction.The pretreated straw was neutralized, dried and enzymatically hydrolyzed. Finally, the sugar concentrations (glucose, xylose and arabinose) from filtrate and from hydrolysate were determined by HPLC. The recovery of xylose from hemicellulose was about 50% using the sulfuric acid pretreatment and less than 2% using the sodium hydroxide pretreatment. Increasing concentrations of sulfuric acid

  6. A New In-core Production Method of Co-60 in CANDU Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Jinqi; Kim, Woosong; Kim, Yonghee [KAIST, Daejeon (Korea, Republic of); Park, Younwon [BEES Inc, Daejeon (Korea, Republic of)

    2016-05-15

    This study introduces an innovative method for Co-60 production in the CANDU6 core. In this new scheme, the central fuel element is replaced by a Co-59 target and Co-60 is obtained after the fuel bundle is discharged. It has been shown that the new method can produce significantly higher amount of Co-60 than the conventional Co production method in CANDU6 reactors without compromising the fuel burnup by removing some (<50%) of the adjuster rods in the whole core. The coolant void reactivity is noticeably reduced when a Co-59 target is loaded into the central pin of the fuel bundle. Meanwhile, the peak power in a fuel bundle is just a little higher due to the central Co-59 target than in conventional CANDU6 fuel design. The basic technology for Co-60 producing was developed by MDS Nordion and Atomic Energy of Canada Limited (AECL) in 1946 and the same technology was adapted and applied in CANDU6 power reactors. The standard CANDU6 reactor has 21 adjuster rods which are fully inserted into the core during normal operation. The stainless steel adjuster rods are replaced with neutronically-equivalent Co-59 adjusters to produce Co-60. Nowadays, the roles of the adjuster rods are rather vague since nuclear reactors cannot be quickly restarted after a sudden reactor trip due to more stringent regulations. In some Canadian CANDU6 reactors, some or all the adjuster rods are removed from the core to maximize the uranium utilization.

  7. The Calculation of Ho Production by indirect Method and Preparation of Polymeric Microsphere for Radioembolisation

    Energy Technology Data Exchange (ETDEWEB)

    Choi, K. H.; Kim, J. B.; Park, U. J.; Cho, E. H.; Nam, S. S.; Yoo, K. M.; Jang, K. D. [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The reactor-produced radiolanthanides have been essential for development of therapeutic radiopharmaceuticals because they emit proper beta energies to induce tumor necrosis. Some radiolanthanides are very useful in that they have the ability of simultaneous diagnosis and therapeutic effect. This nuclide with both capacities is called as theranostic nuclide. In general, radiolanthanides can be produced by (n,γ) and (n,γ)β reaction. Of the two reactions, (n,γ)β reaction-product, shows high specific activity which is important things to affect labeling yield, is suitable for preparing the radiophamaceuticals comprising the antibody or peptide. Some radiolanthanides show the good theranostic effect in that they have proper LET (Linear Energy Transfer) to induce apoptosis for cancer and gamma ray to use as a tracer for cancer diagnosis. Although Ho-166 has been studied for therapeutic purpose since early 1990, production has been limited to direct method. To inject Dy/Ho mixture into the microsphere, we first set-up the concepts which are prior metal-administration method and posterior administration method. The latter is shown in this paper. Metal inletting process was done by using alternating between vacuum and pressurization. To prevent the leak of metal ions from metal/microsphere hybrid, surface coating was done by using interfacial reaction between saline and THF contained Poly lactic acid. Surface coating is simply completed just swiveling the vial. All experiments in this study, we just only tested with cold state.

  8. 76 FR 30968 - In the Matter of Certain Liquid Crystal Display Devices, Products Containing Same, and Methods...

    Science.gov (United States)

    2011-05-27

    ... COMMISSION In the Matter of Certain Liquid Crystal Display Devices, Products Containing Same, and Methods for Using the Same; Notice of Commission Decision Not To Review an Initial Determination Terminating the... importation of certain liquid crystal display (``LCD'') devices, products containing same, and methods for...

  9. Uncertainty assessment of the breath methane concentration method to determine methane production of dairy cows.

    Science.gov (United States)

    Wu, Liansun; Koerkamp, Peter W G Groot; Ogink, Nico

    2017-11-15

    The breath methane concentration method uses the methane concentrations in the cow's breath during feed bin visits as a proxy for the methane production rate. The objective of this study was to assess the uncertainty of a breath methane concentration method in a feeder and its capability to measure and rank cows' methane production. A range of controlled methane fluxes from a so-called artificial reference cow were dosed in a feed bin, and its exhaled air was sampled by a tube inside the feeder and analyzed. The artificial reference cow simulates the lungs, respiratory tract, and rumen of a cow and releases a variable methane flux to generate a concentration pattern in the exhaled breath that closely resembles a real cow's pattern. The strength of the relation between the controlled methane release rates of the artificial reference cow and the measured methane concentrations was analyzed by linear regression, using the coefficient of determination (R2) and the residual standard error as performance indicators. The effect of error sources (source-sampling distance, air turbulence, and cow's head movement) on this relation was experimentally investigated, both under laboratory and barn conditions. From the laboratory to the dairy barn at the 30-cm sampling distance, the R2-value decreased from 0.97 to 0.37 and the residual standard error increased from 75 to 86 ppm as a result of barn air turbulence, the latter increasing to a theoretical 94 ppm if modeled variability due to cow's head movement was accounted for as well. In practice, the effect of these random errors can be compensated by sampling strategies including repeated measurements on each cow over time, thus increasing the distinctive power between cows. However, systematic errors that may disturb the relation between concentration and production rate, such as cow variation in air exhalation rate and air flow patterns around sampling locations that differ between barns, cannot be compensated by repeated

  10. Method for detecting production of zearalenone, zearalenol, T-2 toxin, and deoxynivalenol by Fusarium isolates.

    Science.gov (United States)

    Richardson, K E; Hagler, W M; Hamilton, P B

    1984-01-01

    Three methods for detecting toxigenic fusaria in culture were compared by using known producers of zearalenone, zearalenol, T-2 toxin, and deoxynivalenol. Moist, autoclaved rice cultures of known toxigenic isolates grown in 20-ml tubes yielded oily extracts containing compounds which interfered with qualitative and quantitative analysis for the mycotoxins. Vermiculite moistened with nutrient broth in 20-ml tubes yielded a much cleaner extract. Growing the fungi on a liquid medium required a shorter incubation period, but yields of T-2 toxin and deoxynivalenol were low and variable, and the method required greater space in the incubator. Screening of the extracts by thin-layer chromatography with colorimetric spray reagents to detect the presence of these toxins permitted reduction in the number of extracts quantified by the more lengthy gas-liquid chromatographic method. Culturing in nutrient broth on vermiculite in tubes coupled to a qualitative screen before quantitation proved to be a convenient, inexpensive, and relatively rapid method that enabled reliable screening of a large number of Fusarium isolates for toxin production as compared with prior methods. PMID:6232897

  11. Analysis of phthalates in detergents and cleaning products using two methods

    Directory of Open Access Journals (Sweden)

    Maria Luisa Sevilla Bernabeu

    2016-05-01

    Full Text Available Some phthalates are classified in the hazard class reproductive toxicity category 1B and they are subject to authorisation or they have restrictions according to the REACH Regulation. The presence of six phthalates in detergents and cleaning products was determined using two different methods. The phthalates determined were dimethyl phthalate (DMP, diethyl phthalate (DEP, di-n-butyl phthalate (DBP, bis (2-ethylhexyl phthalate (DEHP, benzyl butyl phthalate (BBP and di-n-octyl phthalate (DOP. Method 1 consisted of gas chromatography and mass spectrometry, and method 2 consisted of reverse-phase liquid chromatography and mass spectrometry. Using method 1 phthalates were determined in 14 out of the 27 samples, and 4 out of the 6 analysed phthalates were found. Using method 2 phthalates were determined in all samples, and all analysed phthalates were detected. Liquid chromatography detected greater number of phthalates than gas chromatography. All the concentrations obtained were less than the critical allowed phthalates concentration according to the REACH Regulation.

  12. Production of Brazilian human norovirus VLPs and comparison of purification methods

    Directory of Open Access Journals (Sweden)

    Thais Alves da Costa Lamounier

    2015-01-01

    Full Text Available AbstractNoroviruses (NVs are responsible for most cases of human nonbacterial gastroenteritis worldwide. Some parameters for the purification of NV virus-like particles (VLPs such as ease of production and yield were studied for future development of vaccines and diagnostic tools. In this study, VLPs were produced by the expression of the VP1 and VP2 gene cassette of the Brazilian NV isolate, and two purification methods were compared: cesium chloride (CsCl gradient centrifugation and ion-exchange chromatography (IEC. IEC produced more and purer VLPs of NV compared to CsCl gradient centrifugation.

  13. Production Method that Leads to TiO2 Nanofibrous Structure Usable in Food Packaging

    Directory of Open Access Journals (Sweden)

    Kovář Radovan

    2016-12-01

    Full Text Available Burned inorganic nanofibers most often occur in the nature in two forms: rutile and anatase. Today, the production of rutile is about to end, while anatase provides more application possibilities. The resulting fiber structure is determined by calcination. It is necessary to find the optimal temperature as well as time, during which the fibers must withstand temperature load. For such method of calcination, it is necessary to create a special design of continuous furnace. Anatase has application in food packaging. Packages containing anatase are used for: food safety, improved packaging for spoilage reduction, sensors for detection of pathogens and spoilage, disinfectants and antimicrobial surfaces.

  14. UTILITY OF THE METHOD T.H.M. (MACHINE - HOUR - RATE) PRODUCTION CENTURY PROCESS AUTOMATION

    OpenAIRE

    Cristina-Otilia, ȚENOVICI

    2014-01-01

    The method T.H.M. (machine - hour - rate) gives greater accuracy in the factories or departments, where production is largely by machinery. In the specialty literature, the notion of price - the time - the car is defined as "œa rate calculated by dividing the budgeted or estimated overhead or labour and overhead cost attributable to a machine or group of similar machines by the appropriate number of machine hours. The hours may be the number of hours for which the machine or group is expected...

  15. A method for production and determination of histamine releasing activity from human peripheral blood mononuclear cells

    DEFF Research Database (Denmark)

    Kampen, G T; Poulsen, L K; Reimert, C M

    1997-01-01

    Histamine releasing factors, i.e. cytokines capable of inducing histamine release from basophils or mast cells, have been suggested to be involved in the pathogenesis of, for example, allergic late-phase reactions. Here we describe a controlled method for production and determination of histamine...... releasing activity (HRA) from human peripheral blood mononuclear cells (MNC). MNC were incubated with concanavalin A (Con A) for 2 h and cultured for another 40 h in fresh serum free medium. The culture supernatants were concentrated 19-25 fold by ultrafiltration (molecular weight cut-off: 3000 Da...

  16. The block up fault diagnosis and monitoring method of the 3-product heavy-medium cyclone

    Energy Technology Data Exchange (ETDEWEB)

    Wu Bing; Xiong Shi-bo; Ma Wei-jin [Taiyuan University of Technology, Taiyuan (China). Research Institute of Mechanical and Electronic Engineering

    2008-02-15

    After monitoring two 3-product heavy medium cyclones with three acceleration sensors at the respective feed gate, the normal state and fault state signals were collected. Two kinds of signals were processed by root mean square (RMS) and kurtosis. The results show that the RMS change is more than 2 to 20 times between fault and normal signals. But the kurtosis change is unnoticeable. Based on these results, a fault monitoring method was proposed with supervising the change of RMS. It can be implemented for real-time alarming and shortened the period of fault eliminated. 5 refs., 2 figs., 1 tab.

  17. Quantitative NMR: an applicable method for quantitative analysis of medicinal plant extracts and herbal products.

    Science.gov (United States)

    Chauthe, Siddheshwar K; Sharma, Ram Jee; Aqil, Farrukh; Gupta, Ramesh C; Singh, Inder Pal

    2012-01-01

    Quantitative analysis and standardisation of plant extracts or herbal products is a tedious process requiring time-consuming sample preparation and analytical method development for the resolution of analyte peaks from the complex natural extract. Quantitative analysis by HPLC requires a pure authentic standard of the compound being quantified. We report here a quantitative NMR (qNMR) method for quantitative analysis of three medicinal plant extracts and their herbal products without the need of authentic standards. Quantitation can be done by using any commercially available pure sample as an internal reference standard. To develop a reliable method for standardisation and quantitative analysis of extracts from medicinal plants Eugenia jambolana, Withania somnifera and Aegle marmelos and their herbal products using qNMR. The (1) H-NMR spectra of known amounts of crude plant extracts with internal standards were recorded in deuterated solvents and quantitation was performed by calculating the relative ratio of the peak area of selected proton signals of the target compounds and the internal reference standard. Anthocyanins [delphinidin-3,5-diglucoside (1), petunidin-3,5-diglucoside (2) and malvidin-3,5-diglucoside (3)] for E. jambolana fruit extract and imperatorin (4) for A. marmelos fruit extract were selected as marker constituents for quantitation and 1,3,5-trimethoxybenzene (TMB) was used as an internal reference standard. Total withanolide content was determined for W. somnifera using 2,4-diformyl phloroglucinol as an internal reference standard. The (1) H-NMR gave a linear response for the marker constituents, anthocyanins, withaferin A and imperatorin. Using the described method, the amount of anthocyanins in Amberlite(R) XAD7HP and Sephadex enriched extracts of E. jambolana was 3.77% and 9.57% (delphinidin-3,5-diglucoside), 4.72% and 12.0% (petunidin-3,5-diglucoside), 6.55% and 15.70% (malvidin-3,5-diglucoside), respectively. The imperatorin content was 0

  18. A Systematic Review on methods of evaluate sentence production deficits in agrammatic aphasia patients: Validity and Reliability issues

    Directory of Open Access Journals (Sweden)

    Azar Mehri

    2014-01-01

    Full Text Available Background: The grammar assessment in aphasia has been done by few standard tests, but today these tests cannot precise evaluate the sentence production in agrammatic patients. In this study, we review structures and contents of tests or tasks designed to find more frequent methods for sentence production ability in aphasia patients. Materials and Methods: We searched the Cochrane library, Medline by PubMed, Science Direct, Scopus, and Google Scholar from 1980 to October 1, 2013 and evaluated all of exist tests or tasks included in the articles and systematic reviews. The sentence production has been studied in three methods. It contains the use of sentence production in spontaneous speech, tasks designed and both methods. The quality of studies was assessed using Critical Appraisal Skills Program. Results: The 160 articles were reviewed and 38 articles were studied according to inclusion and exclusion criteria. They were classified into three categories based on assessment methods of sentence production. In 39.5% studies, researchers have used tasks designed, 7.9% articles have applied spontaneous speech and 52.6% articles have used both methods for evaluation production. Inter-rater reliability was between 90% and 100% and intra-rater reliability was between 96% and 98% in studied. Conclusion: Agrammatic aphasia has syntax disorders, especially in sentence production. Most researchers and clinicians used both methods for evaluation production.

  19. Systems and methods for automated production of multi-composition nanomaterial

    KAUST Repository

    Wu, Tao

    2015-12-24

    Various methods and systems are provided for production of nanowires or other nanomaterials. In one example, among others, a system includes a furnace configured to heat at least a portion of a tube, a material feeder coupled to a first end of the tube, and a vacuum pumping system coupled to a second end of the tube. The material feeder can include a source material manipulator that can position a source material in a fixture of a feeder arm and a linear manipulator that can extend the fixture into the tube, where it can be heated to produce a precursor vapor that can be used to form a nanomaterial on a substrate. In another example, a method includes extending a fixture holding source material into a furnace tube, drawing a precursor vapor produced from the source material across a substrate in the furnace tube, and forming nanomaterial on the substrate.

  20. Method for the production of mineral wool and iron from serpentine ore

    Energy Technology Data Exchange (ETDEWEB)

    O' Connor, William K [Albany, OR; Rush, Gilbert E [Scio, OR; Soltau, Glen F [Lebanon, OR

    2011-10-11

    Magnesium silicate mineral wools having a relatively high liquidus temperature of at least about 1400.degree. C. and to methods for the production thereof are provided. The methods of the present invention comprise melting a magnesium silicate feedstock (e.g., comprising a serpentine or olivine ore) having a liquidus temperature of at least about 1400.degree. C. to form a molten magnesium silicate, and subsequently fiberizing the molten magnesium silicate to produce a magnesium silicate mineral wool. In one embodiment, the magnesium silicate feedstock contains iron oxide (e.g., up to about 12% by weight). Preferably, the melting is performed in the presence of a reducing agent to produce an iron alloy, which can be separated from the molten ore. Useful magnesium silicate feedstocks include, without limitation, serpentine and olivine ores. Optionally, silicon dioxide can be added to the feedstock to lower the liquidus temperature thereof.

  1. Supported catalyst systems and method of making biodiesel products using such catalysts

    Science.gov (United States)

    Kim, Manhoe; Yan, Shuli; Salley, Steven O.; Ng, K. Y. Simon

    2015-10-20

    A heterogeneous catalyst system, a method of preparing the catalyst system and a method of forming a biodiesel product via transesterification reactions using the catalyst system is disclosed. The catalyst system according to one aspect of the present disclosure represents a class of supported mixed metal oxides that include at least calcium oxide and another metal oxide deposited on a lanthanum oxide or cerium oxide support. Preferably, the catalysts include CaO--CeO.sub.2ZLa.sub.2O.sub.3 or CaO--La.sub.2O.sub.3/CeO.sub.2. Optionally, the catalyst may further include additional metal oxides, such as CaO--La.sub.2O.sub.3--GdOxZLa.sub.2O.sub.3.

  2. Monitoring diseases based on register data: Methods and application in the Danish swine production

    DEFF Research Database (Denmark)

    Lopes Antunes, Ana Carolina

    The spread of diseases is one of the most important threats to animal production and public health. Disease spread causes considerable economic losses for the agricultural sector and constitutes trade-limiting factors, as transmission to countries free from disease should beavoided. Monitoring...... and surveillance systems are critical for the timely and effective control of infectious diseases. The ability of a system to detect changes in the disease burden depends on the choice of data source. Many factors can lead to inconsistent data collection among populations and it is therefore important to assess...... that might indicate disease spread between swine herds;iii) evaluating the performance of different time-series methods for the monitoring and surveillance of endemic diseases, as well as assessing the impact of noise in the data on the results when using these methods. Some of the work presented was focused...

  3. UTILITY OF THE METHOD T.H.M. (MACHINE - HOUR - RATE PRODUCTION CENTURY PROCESS AUTOMATION

    Directory of Open Access Journals (Sweden)

    Cristina-Otilia, ȚENOVICI

    2014-11-01

    Full Text Available The method T.H.M. (machine - hour - rate gives greater accuracy in the factories or departments, where production is largely by machinery. In the specialty literature, the notion of price - the time - the car is defined as "œa rate calculated by dividing the budgeted or estimated overhead or labour and overhead cost attributable to a machine or group of similar machines by the appropriate number of machine hours. The hours may be the number of hours for which the machine or group is expected to be operated, the number of hours which would relate to normal working for the factory, or full capacity". In a highly mechanised cost centre, majority of the overhead expenses are incurred on account of using the machine, such as, depreciation, power, repairs and maintenance, insurance, etc. This method is currently offering the most equitable basis for absorption of overheads in machine intensive cost centres.

  4. Production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method.

    Science.gov (United States)

    Kwangdinata, Raymond; Raya, Indah; Zakir, Muhammad

    2014-01-01

    A research on production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method has been done. In this research, we carried out a series of phytoplankton cultures to determine the optimum time of growth and biodiesel synthesis process from phytoplankton lipids. Process of biodiesel synthesis consists of two steps, that is, isolation of phytoplankton lipids and biodiesel synthesis from those lipids. Oil isolation process was carried out by ultrasonic extraction method using ethanol 96%, while biodiesel synthesis was carried out by transesterification reaction using methanol and KOH catalyst under sonication. Weight of biodiesel yield per biomass Chaetoceros calcitrans is 35.35%. Characterization of biodiesel was well carried out in terms of physical properties which are density and viscosity and chemical properties which are FFA content, saponification value, and iodine value. These values meet the American Society for Testing and Materials (ASTM D6751) standard levels, except for the viscosity value which was 1.14 g · cm(-3).

  5. Quality assessment of marketed chamomile tea products by a validated HPTLC method combined with multivariate analysis.

    Science.gov (United States)

    Guzelmeric, Etil; Ristivojević, Petar; Vovk, Irena; Milojković-Opsenica, Dušanka; Yesilada, Erdem

    2017-01-05

    Chamomile tea composed of dried flower heads of Matricaria recutita L. (Asteraceae) is one of the most popular single ingredient herbal teas. Tea industries, spice shops or public bazaars are mostly supplied chamomile as a raw material via cultivation or through nature-picking. However, one of the drawbacks of nature-picking is adulteration. This could be either due to false authentication of the plant materials by ingenuous pickers or intentional/unintentional substitution with other flowers resembling to chamomile in appearance during harvesting. Therefore, quality control of raw chamomile materials before marketing should be carefully considered not only by quantification of apigenin 7-O-glucoside (active marker) but also by fingerprinting of chemical composition. This work presents both quantification of apigenin 7-O-glucoside and chemical fingerprinting of commercial chamomile tea products obtained from different food stores and spice shops by a validated HPTLC method. In addition, HPTLC profiles of investigated chamomile tea samples were compared with HPLC method stated in the European Pharmacopoeia and it was found that HPTLC method was superior to HPLC method in the field of adulteration confirmation. Therefore, fingerprint profiles performed on the silica gel 60 NH 2 F 254 s HPTLC plates combined with pattern recognition techniques of these marketed products were comparatively evaluated with wild and cultivar chamomile samples and also chamomile-like species from Asteraceae. Consequently, not chamomile tea bags but crude flowers sold on market were found to be adulterated with other plant materials. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. The missing links to link ubiquitin: Methods for the enzymatic production of polyubiquitin chains.

    Science.gov (United States)

    Faggiano, Serena; Alfano, Caterina; Pastore, Annalisa

    2016-01-01

    Attachment of ubiquitin (Ub) as monoUb and polyUb chains of different lengths and linkages to proteins plays a dominant role in very different regulatory mechanisms. Therefore, the study of polyUb chains has assumed a central interest in biochemistry and structural biology. An essential step necessary to allow in vitro biochemical and structural studies of polyUbs is the production of their chains in high quantities and purity. This is not always an easy task and can be achieved both enzymatically and chemically. Previous reviews have covered chemical cross-linking exhaustively. In this review, we concentrate on the different approaches developed so far for the enzymatic production of different Ub chains. These strategies permit a certain flexibility in the production of chains with various linkages and lengths. We critically describe the available methods and comment on advantages and limitations. It is clear that the field is mature to study most of the possible links, but some more work needs to be done to complete the picture and to exploit the current methodologies for understanding in full the Ub code. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  7. [Analytical method of clofencet in animal fishery products by LC/MS].

    Science.gov (United States)

    Aoyagi, Mitsutoshi; Niiyama, Kazuhito; Nemoto, Satoru

    2011-01-01

    A method for the determination of clofencet in animal and fishery products was developed, using liquid chromatography with electrospray ionization mass spectrometry (LC/ESI-MS). The sample was homogenized with water and hexane, and the homogenate was extracted with acetonitrile, then acetonitrile-water (4 : 1). An aliquot of the crude extract was passed through a C18 cartridge column (1,000 mg), and the eluate was concentrated. A solution of 10% sodium chloride and 1% sodium hydrogen carbonate, and ethyl acetate were added to the residue, and the mixture was shaken. After shaking, the aqueous phase was recovered and acidified with hydrochloric acid, and then clofencet was extracted with ethyl acetate. The extract was evaporated to dryness and the residue was dissolved in methanol-water (3 : 7). Clofencet was analyzed by LC/MS. The recoveries of clofencet from ten kinds of animal and fishery products were 77.8-97.8%, and the relative standard deviations were 0.6-5.8% (n=5). S/N of the peak of clofencet was >10 and no interfering peak was found in animal and fishery products fortified at 0.01 mg/kg.

  8. Optimization of biohydrogen production from sweet sorghum syrup using statistical methods

    Energy Technology Data Exchange (ETDEWEB)

    Saraphirom, Piyawadee [Department of Biology, Faculty of Science and Technology, Rajabhat Maha Sarakham University, A.Muang, Maha Sarakham 44000 (Thailand); Department of Biotechnology, Faculty of Technology, Khon Kaen University, A. Muang, Khon Kaen 40002 (Thailand); Reungsang, Alissara [Department of Biotechnology, Faculty of Technology, Khon Kaen University, A. Muang, Khon Kaen 40002 (Thailand); Fermentation Research Center for Value Added of Agricultural Products, Faculty of Technology, Khon Kaen University, A. Muang, Khon Kaen 40002 (Thailand)

    2010-12-15

    This study employed statistically based experimental designs to optimize fermentation conditions for hydrogen production from sweet sorghum syrup by anaerobic mixed cultures. Initial screening of important factors influencing hydrogen production, i.e., total sugar, initial pH, nutrient solution, iron (II) sulphate (FeSO{sub 4}), peptone and sodium bicarbonate was conducted by the Plackett-Burman method. Results indicated that only FeSO{sub 4} had statistically significant (P {<=} 0.005) influences on specific hydrogen production (P{sub s}) while total sugar and initial pH had an interdependent effect on P{sub s}. Optimal conditions for the maximal P{sub s} were 25 g/L total sugar, 4.75 initial pH and 1.45 g/L FeSO{sub 4} in which P{sub s} of 6897 mL H{sub 2}/L was estimated. Estimated optimum conditions revealed only 0.04% difference from the actual P{sub s} of 6864 mL H{sub 2}/L which suggested that the optimal conditions obtained can be practically applied to produce hydrogen from sweet sorghum syrup with the least error. (author)

  9. Improving Papanicolaou test quality and reducing medical errors by using Toyota production system methods.

    Science.gov (United States)

    Raab, Stephen S; Andrew-Jaja, Carey; Condel, Jennifer L; Dabbs, David J

    2006-01-01

    The objective of the study was to determine whether the Toyota production system process improves Papanicolaou test quality and patient safety. An 8-month nonconcurrent cohort study that included 464 case and 639 control women who had a Papanicolaou test was performed. Office workflow was redesigned using Toyota production system methods by introducing a 1-by-1 continuous flow process. We measured the frequency of Papanicolaou tests without a transformation zone component, follow-up and Bethesda System diagnostic frequency of atypical squamous cells of undetermined significance, and diagnostic error frequency. After the intervention, the percentage of Papanicolaou tests lacking a transformation zone component decreased from 9.9% to 4.7% (P = .001). The percentage of Papanicolaou tests with a diagnosis of atypical squamous cells of undetermined significance decreased from 7.8% to 3.9% (P = .007). The frequency of error per correlating cytologic-histologic specimen pair decreased from 9.52% to 7.84%. The introduction of the Toyota production system process resulted in improved Papanicolaou test quality.

  10. Proposed algorithm to improve job shop production scheduling using ant colony optimization method

    Science.gov (United States)

    Pakpahan, Eka KA; Kristina, Sonna; Setiawan, Ari

    2017-12-01

    This paper deals with the determination of job shop production schedule on an automatic environment. On this particular environment, machines and material handling system are integrated and controlled by a computer center where schedule were created and then used to dictate the movement of parts and the operations at each machine. This setting is usually designed to have an unmanned production process for a specified interval time. We consider here parts with various operations requirement. Each operation requires specific cutting tools. These parts are to be scheduled on machines each having identical capability, meaning that each machine is equipped with a similar set of cutting tools therefore is capable of processing any operation. The availability of a particular machine to process a particular operation is determined by the remaining life time of its cutting tools. We proposed an algorithm based on the ant colony optimization method and embedded them on matlab software to generate production schedule which minimize the total processing time of the parts (makespan). We test the algorithm on data provided by real industry and the process shows a very short computation time. This contributes a lot to the flexibility and timelines targeted on an automatic environment.

  11. An ultrasonic noncontact method to monitor the doneness of bakery products

    Science.gov (United States)

    Chimenti, D. E.; Faeth, L.

    2000-05-01

    The paper describes a method using ultrasonics and fluid dynamics to assess the state of "doneness" of bakery products, such as bread loaves, online and in situ. The problem in the baking industry is that bread doneness determined by time and temperature can be inaccurate, leaving some product underbaked. We describe a noncontact method using air-pulse excitation and air-coupled ultrasonic motion sensing to infer the state of doneness of the baking loaf while still in the oven and on a moving belt. The ultrasonic sensor operates at 100 kHz using a toneburst excitation and pitch-catch transducer geometry. The problem is one of detecting small (50 micron) movements in the loaf, whose position may vary up to several mm. Further, the loaf movements caused by the air-pulse excitation are rapid (20 to 50 msec). We present a signal-processing system, incorporating a boxcar integrator, that functions as a pulsed, time-domain acoustic interferometer. This instrument is capable of both the high time and spatial resolution essential for the successful operation of the instrument. We estimate a spatial resolution of 30 micron and a temporal resolution of 5 msec, using 100 kHz acoustic waves. The results of numerous in-oven measurements on one-pound bread loaves during the bake cycle will be presented to illustrate the performance of the instrument.

  12. Hydrogen production methods efficiency coupled to an advanced high temperature accelerator driven system

    Energy Technology Data Exchange (ETDEWEB)

    Rodríguez, Daniel González; Lira, Carlos Alberto Brayner de Oliveira [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear; Fernández, Carlos García, E-mail: danielgonro@gmail.com, E-mail: mmhamada@ipen.br [Instituto Superior de Tecnologías y Ciencias aplicadas (InSTEC), La Habana (Cuba)

    2017-07-01

    The hydrogen economy is one of the most promising concepts for the energy future. In this scenario, oil is replaced by hydrogen as an energy carrier. This hydrogen, rather than oil, must be produced in volumes not provided by the currently employed methods. In this work two high temperature hydrogen production methods coupled to an advanced nuclear system are presented. A new design of a pebbled-bed accelerator nuclear driven system called TADSEA is chosen because of the advantages it has in matters of transmutation and safety. For the conceptual design of the high temperature electrolysis process a detailed computational fluid dynamics model was developed to analyze the solid oxide electrolytic cell that has a huge influence on the process efficiency. A detailed flowsheet of the high temperature electrolysis process coupled to TADSEA through a Brayton gas cycle was developed using chemical process simulation software: Aspen HYSYS®. The model with optimized operating conditions produces 0.1627 kg/s of hydrogen, resulting in an overall process efficiency of 34.51%, a value in the range of results reported by other authors. A conceptual design of the iodine-sulfur thermochemical water splitting cycle was also developed. The overall efficiency of the process was calculated performing an energy balance resulting in 22.56%. The values of efficiency, hydrogen production rate and energy consumption of the proposed models are in the values considered acceptable in the hydrogen economy concept, being also compatible with the TADSEA design parameters. (author)

  13. Characterisation of phenolic compounds in lignite dewatering product water using the SPE-GC-MS method

    Energy Technology Data Exchange (ETDEWEB)

    Ying Qi; Alan Chaffee [Monash University, Calyton, Vic. (Australia). Cooperative Research Centre for Clean Power from Lignite School of Chemistry

    2003-07-01

    The high moisture content of Victorian lignite (60 - 70 %) means that pre-drying is required for it to be effectively utilized. The non-evaporative Mechanical Thermal Expression (MTE) process has been investigated and shown to be a promising dewatering technology that can also assist in improving the overall efficiency of power generation from this low-grade fuel. During the MTE process, a product water stream is produced which contains both organic and inorganic impurities released from the coal. Knowledge about the nature of this water is important both for optimisation of MTE process conditions and to facilitate an evaluation of the extent to which the water would require remediation prior to disposal or reuse. This paper focuses on method development for the identification and quantitation of major phenolic components in the water via Gas Chromatograph Mass Spectrometry (GC-MS). It is shown that the acetylation of phenols prior to extraction remarkably improved the extraction efficiency and chromatographic properties of the phenols and, hence, the sensitivity of GC-MS detection. The developed methods have been applied to the characterisation of selected MTE water samples, providing both qualitative and quantitative information on the nature of phenols in this product water stream. 18 refs., 2 figs., 4 tabs.

  14. Skeletonema cf. costatum biogenic silica production rate determinated by PDMPO method

    Science.gov (United States)

    Zhang, Guicheng; Leng, Xiaoyun; Feng, Yuanyuan; Li, Xia; Sun, Jun

    2017-04-01

    Diatoms are the only ecological phytoplankton that require silicic acid for growth. They are also the dominant contributor of ocean's total primary productivity. Generation and circulation with silica walls, which the siliceous organisms form, is an important component of the marine biological pump. It is crucial to the study of the operational mechanisms of biological pump with different sea areas. Moreover, it is the key link to the study of global silicon cycle. This paper introduces the basic mechanism of the formation of diatom silica walls and a new way of researching silicic acid metabolism, namely the 2-(4-pyridyl)-5-((4-(2-dimethylaminoethylaminocarbamoyl)- methoxy)phenyl)oxazole (PDMPO) dyeing method. Under a fluorescence microscope after excitation with bright green fluorescence, it can combine with silicic acid to form a complex into the Si deposition within diatom cells. The advantage of this method is that it can monitor the metabolism of silicate after adding PDMPO. For experimentation and sample collection in each of the specified time points, samples were determinated through the unutilized silicic acid, silica dissoluble intracellular and Si deposition within diatom cells, not only using hot alkaline digestions method but also PDMPO dyeing method. Results showed a good linear relationship between PDMPO fluorescent value and biogenic silica concentration. It was also indicated that PDMPO had no deleterious impact on Skeletonema cf. costatum growth for 34 h and was useful for tracking newly-deposited biogenic silica in diatoms' frustules.

  15. A new method of UCN production using a spatially alternating magnetic field with spin flips

    Science.gov (United States)

    Sakai, K.; Asahi, K.; Ogawa, H.; Goto, A.; Yogo, K.; Suga, T.; Miyoshi, H.; Kameda, D.; Utsuro, M.; Okumura, K.; Hino, M.; Yoshimi, A.

    2001-06-01

    Neutrons with energies E below the Fermi effective potential Ueff~0.2 μeV are called ultracold neutrons (UCN), which are totally reflected from a surface of material and thus can be stored in a bottle. The UCN in a bottle are of a great advantage for high-precision measurements in fundamental physics with neutrons, where the UCN density ρUCN takes the key role. We have proposed a new method for the production of UCN, which is based on the repeated application of a field-gradient force on a magnetic moment realized with a spatially alternating field and the correlated spin flips. To evaluate the feasibility and performance of the method, a computer simulation of neutron decelerating and transporting processes has been performed. The result indicates that the UCN density ρUCN in a storage bottle in the present method reaches quite large values as ρUCN~2.2×103 n/cm3 in a realistic condition. An experiment to test the principle and to explore the technical ingredients of the present method is being conducted using the UCN beam from the supermirror turbine at KUR. .

  16. Zinc oxide nanoparticles synthesis by electrochemical method: Optimization of parameters for maximization of productivity and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Anand, Vikky; Srivastava, Vimal Chandra, E-mail: vimalcsr@yahoo.co.in

    2015-07-05

    Highlights: • Preparation of zinc oxide nanoparticles by electrochemical method. • Zinc electrode used as cathode and anode and oxalic acid as an electrolyte. • Study of the effect of pH, electrolyte concentration, conductivity and operating voltage. • Optimization of productivity by Taguchi methodology. • Nanoparticles characterized by XRD, SEM, UV-DRS techniques. - Abstract: In this study, zinc oxide nanoparticles were synthesized using electrochemical method. Zinc was used as electrode whereas oxalic acid in aqueous solution was used as an electrolyte. A L{sub 9} (3{sup 4}) Taguchi optimization methodology was used to find out the individual and interactive effect of all four independent experimental parameters namely pH (pH{sub o}): 5–8, oxalic acid concentration (m): 0.05–0.15 M, conductivity (k): 20–30 (mS/cm) and operating voltage (V{sub o}): 5–8 V. These experimental parameters were optimized so as to maximize the productivity (g) and correspondingly find out specific energy consumption (kW h/kg) and specific electrode consumption (kg/kg). At the optimum condition of pH{sub o} = 5, m = 0.05 M, k = 30 (mS/cm) and V{sub o} = 8 V, values of productivity, SENC and SELC were found to be 1.03 g, 3.79 kW h/kg and 1.76 kg/kg, respectively. Nanoparticles synthesized at optimum conditions have been further characterized by scanning electron microscopy, X-ray diffraction and UV–Visible diffuse reflectance spectroscopy techniques so as to confirm its ZnO nature.

  17. Effect of feeding methods on the astaxanthin production by Phaffia rhodozyma in fed-batch process

    Directory of Open Access Journals (Sweden)

    Danilo Gomes Moriel

    2005-05-01

    Full Text Available The effect of feeding methods on the production of astaxanthin by the yeast Phaffia rhodozyma ATCC 24202 was studied, using continuous and pulsed fed-batch processes and low cost materials as substrates (sugar cane juice and urea. In continuous fed-batch processes, a cellular astaxanthin concentration of 383.73 µg/g biomass was obtained. But in pulsed fed-batch processes a reduction in the cellular astaxanthin concentration (303.34 µg/g biomass was observed. Thus the continuous fed-batch processes could be an alternative to industrial production of astaxanthin, allowing an increase in the biomass productivity without losses on astaxanthin production by the yeast.O efeito da alimentação na produção de astaxantina pela levedura Phaffia rhodozyma ATCC 24202 foi estudado, utilizando processos descontínuo alimentado com alimentação contínua e intermitente, e matérias-primas de baixo custo como substratos (caldo de cana de açúcar e uréia. Em processos descontínuo alimentado com alimentação contínua, uma concentração celular de astaxantina de 383,73 µg/g biomassa foi obtida. Entretanto, em processos descontínuo alimentado com alimentação intermitente, uma redução na concentração celular de astaxantina (303,34 µg/g biomassa foi observada. Desta forma, processos descontínuo alimentado com alimentação contínua poderiam ser uma alternativa na produção industrial de astaxantina, permitindo um aumento na produtividade de biomassa sem perdas na produção de astaxantina pela levedura.

  18. Forms and methods of stimulation of innovative activities in the restructuring of production program

    Directory of Open Access Journals (Sweden)

    I. I. Emtcova

    2016-01-01

    Full Text Available In the Russian economy not every business entity, implements innovative business activities. The situation generated by the complexity of perception and practical transition to an innovative economic system. On the development of innovative activities affects the overall condition of the economy, condition of material production. The research demonstrates that resource potential of innovative activities in recent years had a tendency towards absolute quantitative reduction and quality deterioration. The decrease in the level and quality of resource provision of innovative activity due to the lack of necessary financial resources. Currently, innovation has become the primary means of increasing the profit of economic entities at the expense of better meet market demand, reduce production costs compared to competitors. Given the complexity of businesses, there is a need of the state stimulation of innovative activity, which is carried out the main directions, forms and methods. In the system of direct effects of the state on business innovation is the stimulation of development of Technopark structures. Creating the most favourable conditions for innovative enterprises, the provision of various services is their main goal. For the food processing industry currently, the largest share in the investments in the investment activities have their own sources of funding, including the use of depreciation. To Finance industry-wide, cross-sectoral and regional scientific and technical problems you can create extra-budgetary funds for financing R & d and innovation support. To encourage regional interests, one of which is that innovation is available to local authorities. In the financial provision of innovative activity is given credit. A Bank loan allows you to increase the efficiency of innovation activity. The article concludes that these measures to stimulate innovative-innovative activity can effectively influence the activity of the company: will

  19. Energy Saving Method of Manufacturing Ceramic Products from Fiber Glass Waste

    Energy Technology Data Exchange (ETDEWEB)

    Michael J. Haun

    2005-07-15

    The U.S. fiber glass industry disposes of more than 260,000 tons of industrial fiber glass waste in landfills annually. New technology is needed to reprocess this industrial waste into useful products. A low-cost energy-saving method of manufacturing ceramic tile from fiber glass waste was developed. The technology is based on sintering fiber glass waste at 700-900 degrees C to produce products which traditionally require firing temperatures of >1200 degrees C, or glass-melting temperatures >1500 degrees C. The process also eliminates other energy intensive processing steps, including mining and transportation of raw materials, spray-drying to produce granulated powder, drying pressed tile, and glazing. The technology completely transforms fiber glass waste into a dense ceramic product, so that all future environmental problems in the handling and disposal of the fibers is eliminated. The processing steps were developed and optimized to produce glossy and matte surface finishes for wall and floor tile applications. High-quality prototype tile samples were processed for demonstration and tile standards testing. A Market Assessment confirmed the market potential for tile products produced by the technology. Manufacturing equipment trials were successfully conducted for each step of the process. An industrial demonstration plant was designed, including equipment and operating cost analysis. A fiber glass manufacturer was selected as an industrial partner to commercialize the technology. A technology development and licensing agreement was completed with the industrial partner. Haun labs will continue working to transfer the technology and assist the industrial partner with commercialization beyond the DOE project.

  20. Effect of lighting programme and nursing method on the production and nursing behaviour of rabbit does

    Directory of Open Access Journals (Sweden)

    Zsolt Gerencsér

    2012-07-01

    Full Text Available The purpose of the experiment was to analyse how the production and nursing behaviour of rabbit does are influenced by different lighting programmes and nursing methods. Rabbit does (n=119 were housed in two rooms. The lighting schedules were a continuous 16L:8D (16L, n=55 or an interrupted 8L:4D:8L:4D (8+8L, n=64. In both rooms, half of the does nursed their kits freely (FS, n=53, while for the other half the suckling method was changed to controlled nursing 3 days prior to the artificial insemination (AI at day 11 (FS-CS, n=66. Lighting schedule had no significant effect on any productive trait. 76% of the 16L does nursed their kits during the dark period; however, in the 8+8L group, 50% of the nursing events occurred in the dark, 50% during the light periods, respectively. Thus the intermittent lighting disturbed the nursing behaviour of the does. The nursing method significantly affected several traits. AI/parturition, body weight of the does at kindling, number of kits born alive, litter weight at day 21, and suckling mortality were 1.38 and 1.24 (P<0.05, 4.51 and 4.37 kg (P<0.01, 7.95 and 8.46 (P<0.05, 3.06 and 2.92 kg (P<0.05,  and 5.3 and 7.3% (P<0.05 in the FS and FS-CS groups, respectively. Compared to the FS group, the advantage of the FS-CS group (P<0.001 was 16.2, 18.4, 9.3 and, 6.3% for total number of kits born, number of kits born alive, number of kits at day 21, and total kits’ weight at day 21 per AI, respectively. Due to the change in the nursing method, the frequency of multiple nursing increased. The length of the nursing period of the FS-CS group was significantly exceeded by that of the FS does. Based on these results, changing the nursing method can be used as an adequate biostimulation method.  

  1. Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

    Science.gov (United States)

    Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

    2009-12-01

    Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

  2. Ultrasonication: An effective pre-treatment method for extracting lipid from Salvinia molesta for biodiesel production

    Directory of Open Access Journals (Sweden)

    M. Mubarak

    2016-09-01

    Full Text Available Biodiesel is considered as one of the promising alternative fuels for diesel engines due its renewability and environment friendly nature. As the process of lipid extraction from the biomass consumes about 90% of the total energy spent for biodiesel production, an efficient and economic method is very important. The amount of lipid extracted from the biomass could be increased if it is pre-treated before the extraction process. This work was an attempt to compare the various pre-treatment methods before extracting lipids from dried Salvinia molesta (aquatic weed, such as autoclaving, microwaving, ultrasonication, sand, and glass grinding. After each pre-treatment method, Bligh and Dyer's method was used to measure the total lipid content in percentage dry weight (% dwt, which was then compared with the untreated S. molesta. It was found experimentally that the lipid yield was 19.97% dwt for ultrasonication > 16.60% dwt for microwaving > 16.46% dwt for glass grinding >16.26% dwt for sand grindin, > 15.72% dwt for autoclaving > 15.36% dwt for untreated. The one-way ANOVA with Tukey's test was then used to validate the experimental results and showed that ultrasonication method of pre-treatment was the most efficient and had resulted in the highest lipid yield among all the methods used which was followed by the microwaving method. The Taguchi method with L9 orthogonal array was then used for the optimization of ultrasonic assisted pre-treatment method before extracting lipid from S. molesta and showed a maximum lipid of 20.86% using 100% amplitude and sonication time of 15 min. The fatty acid methyl ester (FAME of S. molesta lipid was analyzed using gas chromatography mass spectroscopy (GCMS with flame ionization detector. It showed fatty acids such as C14:0, C14:1, C16:0, C16:1, C18:0, C18:1, C20:1, C20:4, C22:0 which contributed 97.38% weight of the total fatty acids. FAME consisted of 63.59% monounsaturated, 33.18% saturated and 0

  3. Evaluation methods of the intellectual capital of the enterprise as a factor of production

    Directory of Open Access Journals (Sweden)

    O. Y. Kolomytseva

    2016-01-01

    Full Text Available Intellectual capital is currently developing rapidly and is becoming the main source of innovation development and economic competitiveness. Defining intellectual capital as the sum of knowledge of all employees and tools of the organization, increasing the body of knowledge, i.e. everything that can be converted to value and secure economic competitiveness, it is necessary to distinguish three main structural element of intellectual capital: human, organizational and customer capital of the organization. And that's a property of their interaction, not their individual functioning, it forms a synergistic phenomenon. But at the same time, the cost of most of the components of intellectual capital are not reflected in the financial statements, and due to the lack of transparency and absence of market criteria rather difficult to evaluate intellectual capital. The article considers methods of assessment of intellectual capital of organization as factor of production on the example of scientific-production organization, JSC "Institute "VEGA". Performing analysis of the known methods of evaluation of intellectual capital, it should be concluded that the method of value added intellectual Ante Police most fully developed and gives the opportunity to assess the effectiveness of human capital in the performance of the enterprise, what's most important to domestic business. This technique includes a number of indicators that allow to take into account such characteristics as revenue, cost, capital investment and value-added physical, human and structural capital value added human capital that most accurately reflects the intellectual capital, what is the difference between market and book value and scoring.

  4. BISULFITE METHOD FOR OBTAINING FIBROUS SEMI-PRODUCTS FROM CELLULOSE-CONTAINING RAW MATERIAL FOR PACKING PRODUCTION

    Directory of Open Access Journals (Sweden)

    I. Karpunin

    2012-01-01

    Full Text Available The paper reveals that while using magnesium bisulfite pulp cooking of raw material which serves for obtaining a desired product with its further application for packing making it is rather important that the raw material should contain hemicellulose and lignin. In the case when the content of hemicellulose  and lignin is rather high in the desired product its qualitative (physical and mechanical indices are deteriorating that negatively affects the qualitative values of the obtained packing.

  5. Development of a flotation-spectrophotometric method for determination of cetylpyridinium chloride in pharmaceutical products

    Directory of Open Access Journals (Sweden)

    Hooshang Parham

    2011-01-01

    Full Text Available A new simple and sensitive flotation-spectrophotometric method for the determination of cetylpyridinium chloride (CPC is reported. The method is based on the formation of an ion- associate between CPC and Orange II (OR which is floated in the interface of aqueous phase and n-hexane by vigorous shaking. The aqueous solution was discarded and the adsorbed ion associate on to the wall of a separating funnel was dissolved in a small volume of methanol solvent and its absorbance was measured at 480 nm. The apparent molar absorptivity (Ε of the ion associate was determined to be 4.12 x 10(5 L mol-1 cm-1. The calibration graph was linear in the concentration range of 15-800 ng mL-1 of CPC with a correlation coefficient of 0.9988. The limit of detection (LOD was 10.8 ng mL-1. The relative standard deviation (RSD for determination of 100 and 800 ng mL-1 of CPC was 3.47 and 2.04% (n=7, respectively. The method was successfully applied to the determination of CPC in a commercial mouth washer product.

  6. Between Contemporary Art and Cultural Analysis: Alternative Methods for Knowledge Production

    Directory of Open Access Journals (Sweden)

    Billy Ehn

    2012-03-01

    Full Text Available Artistic research suggests alternative methods for producing various kinds of knowledge, whether within or without the confines of academe. These methods may involve either the production of investigative artworks or the writing by the artist of a doctoral dissertation about his or her own work. For cultural researchers, the methods employed by artists engaged in these processes are both familiar and challenging, as conventional ethnography is mixed with more unpredictable experiments. This article presents several contemporary artworks, including sculpture, film, dance, installation and performance that explore various aspects of reality. What can be learnt from these works? And what could be achieved by an open exchange between artists and academic researchers? Four methodological approaches are highlighted as being of particular interest. The first relates to artists’ tendency to live experimentally, using themselves both as actors and as research objects. The second arises from the very tangible ways in which contemporary artworks approach the theme of materiality. The third relates to the emotional nature of much of contemporary art – even when it is categorised as conceptual – in its creation, forms of presentation, and influence on the spectator. Finally, many artists are gifted with the ability to find and communicate surprising meanings in ordinary life. How do they do this? Part of the answer seems to be that although artists are open to the implementation of “wild whims”, they exploit their spontaneity in a highly professional manner.

  7. Comparison of combustion products by the iteration method and application of gasoline and biogas

    Science.gov (United States)

    Juntarakod, Paramust

    2017-02-01

    For a specific combustion problem involving calculations of several species at the equilibrium state, it is simpler to write a general computer program and calculate the combustion concentration. Original work describes, an adaptation of Newton-Raphson method was used for solving the highly linear system of equations describing the formation of equilibrium products in reacting of fuel-additive-air mixtures. This study also shows what possible of the results. In this paper, it presents the efficient numerical algorithms for solving the combustion problem, to be used linear equations based on the iteration method and high order of the Taylor series. The modified the Adomian decomposition method was applied to construct the numerical algorithms. Some numerical illustrations are given to show the efficiency of algorithms. Comparisons of results by the new Matlab routines and previous routines, the result data indicate that the new Matlab routines are reliable and application with gasoline and biogas with the variance of equivalence ratios, typical deviations from previous results are less than 0.1%.

  8. An innovative method for determining the diffusion coefficient of product nuclide

    Directory of Open Access Journals (Sweden)

    Chih-Lung Chen

    2017-08-01

    Full Text Available Diffusion is a crucial mechanism that regulates the migration of radioactive nuclides. In this study, an innovative numerical method was developed to simultaneously calculate the diffusion coefficient of both parent and, afterward, series daughter nuclides in a sequentially reactive through-diffusion model. Two constructed scenarios, a serial reaction (RN_1 → RN_2 → RN_3 and a parallel reaction (RN_1 → RN_2A + RN_2B, were proposed and calculated for verification. First, the accuracy of the proposed three-member reaction equations was validated using several default numerical experiments. Second, by applying the validated numerical experimental concentration variation data, the as-determined diffusion coefficient of the product nuclide was observed to be identical to the default data. The results demonstrate the validity of the proposed method. The significance of the proposed numerical method will be particularly powerful in determining the diffusion coefficients of systems with extremely thin specimens, long periods of diffusion time, and parent nuclides with fast decay constants.

  9. An innovative method for determining the diffusion coefficient of product nuclide

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chih Lung [Dept. of Nuclear Back-end Management, Taiwan Power Company, Taipei (China); Wang, Tsing Hai [Dept. Biomedical Engineering and Environment Sciences, National Tsing Hua University, Hsinchu (China)

    2017-08-15

    Diffusion is a crucial mechanism that regulates the migration of radioactive nuclides. In this study, an innovative numerical method was developed to simultaneously calculate the diffusion coefficient of both parent and, afterward, series daughter nuclides in a sequentially reactive through-diffusion model. Two constructed scenarios, a serial reaction (RN{sub 1} → RN{sub 2} → RN{sub 3}) and a parallel reaction (RN{sub 1} → RN{sub 2}A + RN{sub 2}B), were proposed and calculated for verification. First, the accuracy of the proposed three-member reaction equations was validated using several default numerical experiments. Second, by applying the validated numerical experimental concentration variation data, the as-determined diffusion coefficient of the product nuclide was observed to be identical to the default data. The results demonstrate the validity of the proposed method. The significance of the proposed numerical method will be particularly powerful in determining the diffusion coefficients of systems with extremely thin specimens, long periods of diffusion time, and parent nuclides with fast decay constants.

  10. Scientific basis of a new method for hydrophobic modification of mineral binders using peat products

    Directory of Open Access Journals (Sweden)

    O. Misnikov

    2016-10-01

    Full Text Available This study deals with the issue of caking of mineral binding materials during storage and transportation. The author conducted a critical analysis of known methods for the protection of cement from exposure to moisture and water vapour. Common disadvantages of these methods are their low effectiveness and complexity of use in industrial and domestic environments. This article introduces a new method for hydrophobising construction materials using peat, which achieves high water repellency in the modified materials with relatively low expenditure on organic materials. The author proposes film coating of the mineral particles of dispersed hydrophilic materials as a protection mechanism against their undesirable exposure to moisture during storage. The insulating film consists of hydrophobic products (bitumens released during thermal decomposition of the organic matter in peat. The estimated thickness of the bitumen film is about 12 nm and it does not adversely affect the flow properties of the powder. A model of the formation of film coatings on mineral particles is provided and their elemental chemical composition is determined. It is shown experimentally that the modified hydrophobic cement is protected from exposure to liquid vapours, and optimal values of organic component concentrations in the dispersed mineral matter that do not reduce the strength of cement mortar are identified.

  11. Using Bayesian methods to predict climate impacts on groundwater availability and agricultural production in Punjab, India

    Science.gov (United States)

    Russo, T. A.; Devineni, N.; Lall, U.

    2015-12-01

    Lasting success of the Green Revolution in Punjab, India relies on continued availability of local water resources. Supplying primarily rice and wheat for the rest of India, Punjab supports crop irrigation with a canal system and groundwater, which is vastly over-exploited. The detailed data required to physically model future impacts on water supplies agricultural production is not readily available for this region, therefore we use Bayesian methods to estimate hydrologic properties and irrigation requirements for an under-constrained mass balance model. Using measured values of historical precipitation, total canal water delivery, crop yield, and water table elevation, we present a method using a Markov chain Monte Carlo (MCMC) algorithm to solve for a distribution of values for each unknown parameter in a conceptual mass balance model. Due to heterogeneity across the state, and the resolution of input data, we estimate model parameters at the district-scale using spatial pooling. The resulting model is used to predict the impact of precipitation change scenarios on groundwater availability under multiple cropping options. Predicted groundwater declines vary across the state, suggesting that crop selection and water management strategies should be determined at a local scale. This computational method can be applied in data-scarce regions across the world, where water resource management is required to resolve competition between food security and available resources in a changing climate.

  12. NUTRITIONAL EVALUATION OF VARIOUS FEEDSTUFFS FOR LIVESTOCK PRODUCTION USING IN VITRO GAS METHOD

    Directory of Open Access Journals (Sweden)

    S. A. KHANUM, T. YAQOOB1, S. SADAF1, M. HUSSAIN, M. A. JABBAR1, H. N. HUSSAIN, R. KAUSAR AND S. REHMAN1

    2007-07-01

    Full Text Available A study was undertaken to evaluate the nutritional quality of some conventional and non-conventional feed resources by using in vitro gas method. Samples of various feedstuffs were analyzed chemically, as well as by in vitro gas method. The feedstuffs having different digestibilities showed significant (P<0.05 differences in the rate and amount of gas production, metabolizable energy (ME and digestibility of organic matter. Predicted metabolizable energy values were very low in feedstuffs having high fiber and low protein contents. These feedstuffs included various grasses, crop residues and wheal straw. Lowest ME value of 4.7 MJ/kg of dry matter (DM was found in wheat straw. Many of the roughages (Sorghum vulgare, Kochia indica, Leptochloa fusca studied were found to be deficient in fermentable carbohydrates, resulting in low organic matter digestibility. Concentrate feed stuffs like cotton seed meal, sunflower meal, cotton seed cakes, rice polish, rapeseed meal and Zea mays (maize grains had higher ME values (9.27 – 12.44 MJ/kg DM. The difference of ME of various feedstuffs reflects different contents of fermentable carbohydrates and available nitrogen in cereals and protein supplements. Among the non-conventional feedstuffs, Acacia ampliceps, Acacia nilotica, Sesbania aculeata, Leptochloa fusca and Prosopis juliflora were found potential fodders. Extensive use of in vitro gas method proved its potential as a tool to evaluate various ruminant feeds for energy component.

  13. Straightforward analytical method to determine opium alkaloids in poppy seeds and bakery products.

    Science.gov (United States)

    López, Patricia; Pereboom-de Fauw, Diana P K H; Mulder, Patrick P J; Spanjer, Martien; de Stoppelaar, Joyce; Mol, Hans G J; de Nijs, Monique

    2018-03-01

    A straightforward method to determine the content of six opium alkaloids (morphine, codeine, thebaine, noscapine, papaverine and narceine) in poppy seeds and bakery products was developed and validated down to a limit of quantification (LOQ) of 0.1mg/kg. The method was based on extraction with acetonitrile/water/formic acid, ten-fold dilution and analysis by LC-MS/MS using a pH 10 carbonate buffer. The method was applied for the analysis of 41 samples collected in 2015 in the Netherlands and Germany. All samples contained morphine ranging from 0.2 to 240mg/kg. The levels of codeine and thebaine ranged from below LOQ to 348mg/kg and from below LOQ to 106mg/kg, respectively. Sixty percent of the samples exceeded the guidance reference value of 4mg/kg of morphine set by BfR in Germany, whereas 25% of the samples did not comply with the limits set for morphine, codeine, thebaine and noscapine by Hungarian legislation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. An integrated method for improving the dairy production sector in developing countries: the case of Cameroon.

    Science.gov (United States)

    Bayemi, P H; Webb, E C

    2009-04-01

    During the past six years, ten research topics were carried out with the aim of developing an integrated method to improve production and sustainability of dairy systems in Cameroon. This involved reviewing dairy research done in the country, carrying out a participatory rural appraisal and an economic opportunity survey in selected dairy farms, setting up on-farm interventions, investigating cow reproduction, evaluating milk quality and the impact of integrated interventions. Guidelines for improvement of the dairy sector were set up. It was found that the developed integrated method had a positive impact on dairy farms. Farmers who adopted interventions had nearly 200% higher economic returns. In order to boost the Cameroonian dairy sector, it is suggested that the government acts as a motivating force by organizing the market, ensuring the monitoring of epizootic diseases and providing artificial insemination services and organizing breeding societies. It is also suggested that the integrated method becomes a discipline in dairy science and be applied in other developing countries.

  15. An analysis of the benefits of ethnography design methods for product modelling

    Science.gov (United States)

    Butlewski, M.; Misztal, A.; Belu, N.

    2016-08-01

    application of ethnography design methodology in product design and to analyse the benefits of its use. The analysis is based on effects of its application with the support of product design from various industries, along with a discussion of the method's limitations. Among benefits of ethnography design, the greatest proved to be providing knowledge of nonspecific user behaviour previously unknown to designers, which when rendered by models allowed to develop innovative solutions.

  16. A Timed Colored Petri Net Simulation-Based Self-Adaptive Collaboration Method for Production-Logistics Systems

    Directory of Open Access Journals (Sweden)

    Zhengang Guo

    2017-03-01

    Full Text Available Complex and customized manufacturing requires a high level of collaboration between production and logistics in a flexible production system. With the widespread use of Internet of Things technology in manufacturing, a great amount of real-time and multi-source manufacturing data and logistics data is created, that can be used to perform production-logistics collaboration. To solve the aforementioned problems, this paper proposes a timed colored Petri net simulation-based self-adaptive collaboration method for Internet of Things-enabled production-logistics systems. The method combines the schedule of token sequences in the timed colored Petri net with real-time status of key production and logistics equipment. The key equipment is made ‘smart’ to actively publish or request logistics tasks. An integrated framework based on a cloud service platform is introduced to provide the basis for self-adaptive collaboration of production-logistics systems. A simulation experiment is conducted by using colored Petri nets (CPN Tools to validate the performance and applicability of the proposed method. Computational experiments demonstrate that the proposed method outperforms the event-driven method in terms of reductions of waiting time, makespan, and electricity consumption. This proposed method is also applicable to other manufacturing systems to implement production-logistics collaboration.

  17. Statistical methods for the evaluation of educational services and quality of products

    CERN Document Server

    Bini, Matilde; Piccolo, Domenico; Salmaso, Luigi

    2009-01-01

    The book presents statistical methods and models that can usefully support the evaluation of educational services and quality of products. The evaluation of educational services, as well as the analysis of judgments and preferences, poses severe methodological challenges because of the presence of the following aspects: the observational nature of the context, which is associated with the problems of selection bias and presence of nuisance factors; the hierarchical structure of the data (multilevel analysis); the multivariate and qualitative nature of the dependent variable; the presence of non observable factors, e.g. the satisfaction, calling for the use of latent variables models; the simultaneous presence of components of pleasure and components of uncertainty in the explication of the judgments, that asks for the specification and estimation of mixture models. The contributions concern methodological advances developed mostly with reference to specific problems of evaluation using real data sets.

  18. ASSESSMENT OF THE PRODUCTIBILITY OF HYBRID NODES USING THE MULTI-CRITERIA METHOD

    Directory of Open Access Journals (Sweden)

    Tomasz Urbański

    2014-06-01

    Full Text Available The article presents an assessment of the productibility of hybrid nodes. The hybrid node is a new structural element the implementation of which causes numerous (especially technological problems that need to be solved. The most important element of the hybrid node is the so-called connector, the choice of which is a complex and difficult problem. It involves taking into account many aspects (constructional, strength-related, technological, economic in order to make sure that the choice is as objective as possible. Therefore, an attempt to acquire a comprehensive view at the problem requires that a set of accurate criteria be used for assessment. In this paper, the author undertakes such an attempt. The expert method presented herein allows for choosing the right connector.

  19. Methods and systems for fuel production in electrochemical cells and reactors

    Energy Technology Data Exchange (ETDEWEB)

    Marina, Olga A.; Pederson, Larry R.

    2018-01-30

    Methods and systems for fuel, chemical, and/or electricity production from electrochemical cells are disclosed. A voltage is applied between an anode and a cathode of an electrochemical cell. The anode includes a metal or metal oxide electrocatalyst. Oxygen is supplied to the cathode, producing oxygen ions. The anode electrocatalyst is at least partially oxidized by the oxygen ions transported through an electrolyte from the cathode to the anode. A feed gas stream is supplied to the anode electrocatalyst, which is converted to a liquid fuel. The anode electrocatalyst is re-oxidized to higher valency oxides, or a mixture of oxide phases, by supplying the oxygen ions to the anode. The re-oxidation by the ions is controlled or regulated by the amount of voltage applied.

  20. Which product would be chosen? A fuzzy VIKOR method for evaluation and selection of products in terms of customers' point of view; Case study: Iranian cell phone market

    Directory of Open Access Journals (Sweden)

    Jahangir Yadollahi Farsi

    2012-07-01

    Full Text Available Product selection is always one of the troubles that decision makers are facing with it. Correct selection requires having suitable method for this important issue. In this article, we concern to introduce an approach of fuzzy decision making for selection to decision makers. The nature of decision making is usually complex and without structure. Totally, most of qualitative and quantitative factors such as quality, price, and flexibility should be concerned for determining a suitable product. In this study, it is attempted to use recent advances in ranking methods for product selection. The proposed study uses oral preferences language shown in terms of triangular and trapezoid fuzzy numbers. Then, a multi criteria hierarchical decision making is suggested on the basis of fuzzy collection theory for product selection where the proposed fuzzy VIKOR uses different qualitative and quantitative criteria.

  1. TBARs distillation method: revision to minimize the interference from yellow pigments in meat products.

    Science.gov (United States)

    Díaz, P; Linares, M B; Egea, M; Auqui, S M; Garrido, M D

    2014-12-01

    The aim was to study the effect of the incubation method and TBA reagent (concentration/solvent) on yellow pigment interference in meat products. Distillates from red sausage, sucrose, malondialdehyde and a mixture of sucrose-malondialdehyde were reacted with four different TBA solutions at five different temperature/time relations. Two TBA solutions were prepared at 20mM using 90% glacial acetic acid or 3.86% perchloric acid. In addition, an 80mM TBA solution was prepared using distilled water adjusted to pH4 and another using 0.8% TBA in distilled water. The temperature/time relations were: (1) 35min in a boiling water bath; (2) 70°C/30min; (3) 40°C/90min; (4) room temperature (r.t.) (24°C) in dark conditions for 20h; and (5) 60min in a boiling water bath. The results showed that aqueous or diluted acid solutions of TBA reagent and the application of 100°C for less than 1h provided the best conditions to minimize the presence of yellow pigments and maximize pink pigment formation in meat products. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Simulation of product distribution at PT Anugrah Citra Boga by using capacitated vehicle routing problem method

    Science.gov (United States)

    Lamdjaya, T.; Jobiliong, E.

    2017-01-01

    PT Anugrah Citra Boga is a food processing industry that produces meatballs as their main product. The distribution system of the products must be considered, because it needs to be more efficient in order to reduce the shipment cost. The purpose of this research is to optimize the distribution time by simulating the distribution channels with capacitated vehicle routing problem method. Firstly, the distribution route is observed in order to calculate the average speed, time capacity and shipping costs. Then build the model using AIMMS software. A few things that are required to simulate the model are customer locations, distances, and the process time. Finally, compare the total distribution cost obtained by the simulation and the historical data. It concludes that the company can reduce the shipping cost around 4.1% or Rp 529,800 per month. By using this model, the utilization rate can be more optimal. The current value for the first vehicle is 104.6% and after the simulation it becomes 88.6%. Meanwhile, the utilization rate of the second vehicle is increase from 59.8% to 74.1%. The simulation model is able to produce the optimal shipping route with time restriction, vehicle capacity, and amount of vehicle.

  3. METHODS OF BREEDING AND SEED PRODUCTION IN MONSOON CLIMATE OF THE RUSSIAN FAR EAST

    Directory of Open Access Journals (Sweden)

    V. I. Leunov

    2017-01-01

    Full Text Available Tasks that were posed have been well proven and realized concerning the breeding program for beetroot in monsoon climate of the Russian Far East. The new breeding accessions suitable for further variety development with high immunological, productive and marketable characteristics, increased biochemical parameters, and resistance to highly moist soil and pathogens were developed. The biological and morphological features of growing seed plants in beetroot have been studied using the effective elements of selection with combination of promising agricultural techniques for tilling. Technological methods for early generation and marketable seed production have been improved. The favorable agricultural and climatic areas were found to cultivate seed plants of beetroot and produce the high quality seeds that preserved all biological and horticulturally valuable traits. The varieties of beetroot, such as ‘Uspekh’ (variety type Bordeaux, ‘Primorskaya Cylidricheskaya’ (variety type Granat, ‘Primorskaya 4’ (variety type Bordeaux, breeding accessions ‘POOS 22’ (Bordeaux, Primorskaya were developed and included in the State Register of Breeding Achievements. 

  4. Using optimization methods to align food production and biodiversity conservation beyond land sharing and land sparing.

    Science.gov (United States)

    Butsic, Van; Kuemmerle, Tobias

    2015-04-01

    Aligning food production with biodiversity conservation is one of the greatest challenges of our time. One framing of this challenge is the land-sharing vs. land-sparing debate. Much empirical research has focused on identifying the relationship between agricultural yields and species populations, and using the relative number of species with particular relationships to inform landscape-level management. We feel this is misguided, as such an approach does not guarantee the existence of every species of conservation concern. Here, we show that constrained optimization methods can be used to identify landscape-level solutions which maximize agricultural yields and populations for any number of species. Our results suggest that the relative number of species with particular yield-density curves is not a good indicator as to how landscapes should be managed. Likewise, choosing between blanket sharing or sparing strategies leads to suboptimal outcomes at the landscape scale in many cases. Our framework makes maximum use of the rich information contained in yield-density curves to move beyond black-and-white choices and toward more nuanced, context-specific solutions to aligning biodiversity conservation and agricultural production. Such optimal landscapes will likely have features of both sharing and sparing strategies.

  5. Production method of solid electrolyte fuel cell; Kotai denkaishitsu nenryo denchi no seizo hoho

    Energy Technology Data Exchange (ETDEWEB)

    Nagata, K.; Kuru, C.

    1995-09-05

    In the conventional cylindrical type laterally grooved solid electrolyte fuel cell (SOFC), the interconnector is thermally sprayed on the electrolyte. Since it is difficult to form a dense interconnector film by thermal spraying, the sealing film is applied underneath the interconnector to prevent the fuel gas from leaking. This invention solves the problem. The interconnector film is formed by means of thermal spraying on the substrate tube before film formation of fuel electrode and electrolyte on the substrate tube. Then it is heat-treated at 1300{degree}C for 2 hours to make the interconnector and the electrolyte dense at the same time. Since then the air electrode film is formed to complete the cylindrical type laterally grooved SOFC. This method can eliminate the sealing film, or the intermediate film, which is required in the conventional fuel cell structure. So that the production process can be simplified remarkably to reduce the production cost. In addition, the heat treatment stabilizes the physical properties of interconnector film. 2 figs.

  6. A chromatographic method for the production of a human immunoglobulin G solution for intravenous use

    Directory of Open Access Journals (Sweden)

    K. Tanaka

    1998-11-01

    Full Text Available Immunoglobulin G (IgG of excellent quality for intravenous use was obtained from the cryosupernatant of human plasma by a chromatographic method based on a mixture of ion-exchange, DEAE-Sepharose FF and arginine Sepharose 4B affinity chromatography and a final purification step by Sephacryl S-300 HR gel filtration. The yield of 10 experimental batches produced was 3.5 g IgG per liter of plasma. A solvent/detergent combination of 1% Tri (n-butyl phosphate and 1% Triton X-100 was used to inactivate lipid-coated viruses. Analysis of the final product (5% liquid IgG based on the mean for 10 batches showed 94% monomers, 5.5% dimers and 0.5% polymers and aggregates. Anticomplementary activity was 0.3 CH50/mg IgG and prekallikrein activator levels were less than 5 IU/ml. Stability at 37ºC for 30 days in the liquid state was satisfactory. IgG was stored in flasks (2.5 g/flask at 4 to 8ºC. All the characteristics of the product were consistent with the requirements of the 1997 Pharmacopée Européenne.

  7. Product-service system method to measure sustainability level of traditional smoked fish processing industries

    Directory of Open Access Journals (Sweden)

    Purwaningsih Ratna

    2018-01-01

    Full Text Available Small Medium Enterprise’s (SME of traditional fish processing at Semarang, Central Java, Indonesia still focus their business on gain more profits. Sustainability aspect has not received enough attention yet. This study aims to review the sustainability level of SME smoked fish Semarang using product service system (PSS method. PSS consists of three dimensions (1 Environment, (2 Socio-cultural and (3 Economic. Each dimension consists of 6 criteria's. PSS not only assess the level of sustainability but also formulated the recommendation to increase the industries sustainability level. Sustainability assessment and recommendations formulation is guided by a check-list form. Then, the portfolio diagram used to select these recommendations according to its feasibility to be implemented and its importance for the industries. The result of sustainability assessment for traditional fish processing is 0.44, categorized as medium level. The recommendations for the environmental dimension are (1 use of liquid smoke on fish processing and (2 use of wastewater treatment with anaerobic ponds Recommendation for the socio-cultural dimension is use personal protective tool to reduce worker risk on safety and health. Recommendation for the economic dimension is used social media for product marketing and increasing the economic value of fish lung wastes. Recommendations are then illustrated in a diagram in the form of radar sustainability.

  8. The production method affects the efficacy of platelet derivatives to expand mesenchymal stromal cells in vitro.

    Science.gov (United States)

    Bernardi, Martina; Agostini, Francesco; Chieregato, Katia; Amati, Eliana; Durante, Cristina; Rassu, Mario; Ruggeri, Marco; Sella, Sabrina; Lombardi, Elisabetta; Mazzucato, Mario; Astori, Giuseppe

    2017-05-01

    The use of fetal bovine serum (FBS) as a media supplement for the ex vivo expansion of bone-marrow derived mesenchymal stromal cells (BM-MSC) has been discouraged by regulatory agencies, due to the risk of transmitting zoonoses and to elicit immune reactions in the host once transplanted. Platelet derivatives are valid FBS substitutes due to their content of growth factors that can be released disrupting the platelets by physical methods or physiological stimuli. We compared platelet derivatives produced by freezing/thawing (platelet lysates, PL) or after CaCl2 activation (platelet releasate surnatant rich in growth factors, PR-SRGF) for their content in growth factors and their ability to support the ex vivo expansion of BM-MSC. The cytokine content in the two platelet derivatives was evaluated. BM-MSC were expanded in complete medium containing 10, 7.5 and 5% PL or PR-SRGF and the cell phenotype, clonogenic capacity, immunomodulation properties and tri-lineage differentiation potential of the expanded cells in both media were investigated. The concentration of PDGF-AB, PDGF-AA, PDGF-BB in PR-SRGF resulted to be respectively 5.7×, 1.7× and 2.3× higher compared to PL. PR-SRGF promoted a higher BM-MSC proliferation rate compared to PL not altering BM-MSC phenotype. Colony forming efficiency of BM-MSC expanded in PR-SRGF showed a frequency of colonies significantly higher than cells expanded in PL. BM-MSC expanded in PL or PR-SRGF maintained their immunomodulatory properties against activated lymphocytes even if BM-MSC expanded in FBS performed significantly better. The method used to release platelet factors significantly affects the enrichment in growth factors and overall product performance. The standardization of the production process of platelet derivatives and the definition of their release criteria requires further investigation.

  9. Which product would be chosen? A fuzzy VIKOR method for evaluation and selection of products in terms of customers' point of view; Case study: Iranian cell phone market

    OpenAIRE

    Jahangir Yadollahi Farsi; Javad Siahkali Moradi; Behrooz Jamali

    2012-01-01

    Product selection is always one of the troubles that decision makers are facing with it. Correct selection requires having suitable method for this important issue. In this article, we concern to introduce an approach of fuzzy decision making for selection to decision makers. The nature of decision making is usually complex and without structure. Totally, most of qualitative and quantitative factors such as quality, price, and flexibility should be concerned for determining a suitable product...

  10. Determination of methyldibromoglutaronitrile in cosmetic products by high-performance liquid chromatography with electrochemical detection. Method validation

    DEFF Research Database (Denmark)

    Rastogi, Suresh Chandra; Zachariae, Claus; Johansen, Jeanne D

    2004-01-01

    An increased frequency of contact allergy to methyldibromoglutaronitrile (MDBGN), a commonly used preservative in cosmetics and other consumer products, has been reported in recent years. A high-performance liquid chromatography (HPLC) method for the determination of MDBGN in cosmetic products ha...

  11. System and method for integration of renewable energy and fuel cell for the production of electricity and hydrogen

    NARCIS (Netherlands)

    Hemmes, K.

    The invention relates to a system and method for integrating renewable energy and a fuel cell for the production of electricity and hydrogen, wherein this comprises the use of renewable energy as fluctuating energy source for the production of electricity and also comprises the use of at least one

  12. 77 FR 72385 - Certain Coenzyme Q10 Products and Methods of Making Same; Commission Determination (1) To Review...

    Science.gov (United States)

    2012-12-05

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Coenzyme Q10 Products and Methods of Making Same; Commission Determination (1) To Review... into the United States of certain coenzyme Q10 products by reason of infringement of certain claims of...

  13. 25 CFR 309.8 - For marketing purposes, what is the recommended method of identifying authentic Indian products?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false For marketing purposes, what is the recommended method of identifying authentic Indian products? 309.8 Section 309.8 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.8 For marketing purposes, what is the...

  14. System and method for integration of renewable energy and fuel cell for the production of electricity and hydrogen

    NARCIS (Netherlands)

    Hemmes, K.

    2007-01-01

    The invention relates to a system and method for integrating renewable energy and a fuel cell for the production of electricity and hydrogen, wherein this comprises the use of renewable energy as fluctuating energy source for the production of electricity and also comprises the use of at least one

  15. Influence of calibration method on distortion-product otoacoustic emission measurements: I. test performance.

    Science.gov (United States)

    Burke, Sienna R; Rogers, Abigail R; Neely, Stephen T; Kopun, Judy G; Tan, Hongyang; Gorga, Michael P

    2010-08-01

    Calibration errors in distortion-product otoacoustic emission (DPOAE) measurements because of standing waves cause unpredictable changes in stimulus and DPOAE response level. The purpose of this study was to assess the extent to which these errors affect DPOAE test performance. Standard calibration procedures use sound pressure level (SPL) to determine specified levels. Forward pressure level (FPL) is an alternate calibration method that is less susceptible to standing waves. However, FPL derivation requires prior cavity measurements, which have associated variability. In an attempt to address this variability, four FPL methods were compared with SPL: a reference calibration derived from 25 measurements before all data collection and a daily calibration measurement, both of which were made at body and room temperature. Data were collected from 52 normal-hearing and 103 hearing-impaired subjects. DPOAEs were measured for f2 frequencies ranging from 2 to 8 kHz in half-octave steps, with L2 ranging from -20 to 70 dB SPL (5-dB steps). At each f2, DPOAEs were measured in five calibration conditions: SPL, daily FPL at body temperature (daily body), daily FPL at room temperature (daily room), reference FPL at body temperature (ref body), and reference FPL at room temperature (ref room). Data were used to construct receiver operating characteristic (ROC) curves for each f2, calibration method, and L2. From these curves, areas under the ROC curve (AROC) were estimated. The results of this study are summarized by the following observations: (1) DPOAE test performance was sensitive to stimulus level, regardless of calibration method, with the best test performance observed for moderate stimulus level conditions. (2) An effect of frequency was observed for all calibration methods, with the best test performance at 6 kHz and the worst performance at 8 kHz. (3) At clinically applicable stimulus levels, little difference in test performance among calibration methods was noted

  16. Quantitation of the protein content of diphtheria and tetanus toxoids by the Biuret method during production of combined vaccines.

    Science.gov (United States)

    Shrivastaw, K P; Jhamb, S S; Kumar, A

    1995-03-01

    The protein content of 15 batches of diphtheria toxoid and 12 batches of tetanus toxoid was measured by Biuret method and was compared to the values obtained by the Kjeldahl method. Statistical analysis did not show any difference between the two methods. The Biuret method, is specific, easy to carry out and takes less time for protein estimation of purified toxoids during production of combined vaccines.

  17. The method of regions and next-to-soft corrections in Drell–Yan production

    Directory of Open Access Journals (Sweden)

    D. Bonocore

    2015-03-01

    Full Text Available We perform a case study of the behaviour of gluon radiation beyond the soft approximation, using as an example the Drell–Yan production cross section at NNLO. We draw a careful distinction between the eikonal expansion, which is in powers of the soft gluon energies, and the expansion in powers of the threshold variable 1−z, which involves important hard-collinear effects. Focusing on the contribution to the NNLO Drell–Yan K-factor arising from real–virtual interference, we use the method of regions to classify all relevant contributions up to next-to-leading power in the threshold expansion. With this method, we reproduce the exact two-loop result to the required accuracy, including z-independent non-logarithmic contributions, and we precisely identify the origin of the soft-collinear interference which breaks simple soft-gluon factorisation at next-to-eikonal level. Our results pave the way for the development of a general factorisation formula for next-to-leading-power threshold logarithms, and clarify the nature of loop corrections to a set of recently proposed next-to-soft theorems.

  18. Method for measuring CP violation in top quark pair production at ATLAS

    CERN Document Server

    Martens, Fredric Kalen

    2007-01-01

    The Standard Model (SM) predicts that a large fraction of top quark pairs produced in 14 TeV center-of-mass pp collisions will have correlated helicities, and the number of t L t L and t R t R pairs produced will be approximately equal. Unequal numbers of these pairs are an indication that CP symmetry is violated and there is new physics beyond the Standard Model. A method to measure CP violation in tt pair production at the Large Hadron Collider is presented. In particular, the value of Δ N LR = [σ( t L t L ) - σ( t R t R )]/σ(tt) TOT is found to be best measured in the lepton-plus-jets channel of tt decay. In this channel, the top pair can be reconstructed and the angular distribution of the leptons with respect to the top quark momentum can be determined. The ATLAS experiment can measure Δ N LR with a statistical uncertainty on the order of 3.5% using only 50 fb -1 of integrated luminosity. The sources of a number of systematic uncertainties were also studied. A method to detect CP violation in the di...

  19. Combined eyetracking and keystroke-logging methods for studying cognitive processes in text production.

    Science.gov (United States)

    Wengelin, Asa; Torrance, Mark; Holmqvist, Kenneth; Simpson, Sol; Galbraith, David; Johansson, Victoria; Johansson, Roger

    2009-05-01

    Writers typically spend a certain proportion of time looking back over the text that they have written. This is likely to serve a number of different functions, which are currently poorly understood. In this article, we present two systems, ScriptLog+ TimeLine and EyeWrite, that adopt different and complementary approaches to exploring this activity by collecting and analyzing combined eye movement and keystroke data from writers composing extended texts. ScriptLog+ TimeLine is a system that is based on an existing keystroke-logging program and uses heuristic, pattern-matching methods to identify reading episodes within eye movement data. EyeWrite is an integrated editor and analysis system that permits identification of the words that the writer fixates and their location within the developing text. We demonstrate how the methods instantiated within these systems can be used to make sense of the large amount of data generated by eyetracking and keystroke logging in order to inform understanding of the cognitive processes that underlie written text production.

  20. Production of Biodiesel from Lipid of Phytoplankton Chaetoceros calcitrans through Ultrasonic Method

    Science.gov (United States)

    Kwangdinata, Raymond; Raya, Indah; Zakir, Muhammad

    2014-01-01

    A research on production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method has been done. In this research, we carried out a series of phytoplankton cultures to determine the optimum time of growth and biodiesel synthesis process from phytoplankton lipids. Process of biodiesel synthesis consists of two steps, that is, isolation of phytoplankton lipids and biodiesel synthesis from those lipids. Oil isolation process was carried out by ultrasonic extraction method using ethanol 96%, while biodiesel synthesis was carried out by transesterification reaction using methanol and KOH catalyst under sonication. Weight of biodiesel yield per biomass Chaetoceros calcitrans is 35.35%. Characterization of biodiesel was well carried out in terms of physical properties which are density and viscosity and chemical properties which are FFA content, saponification value, and iodine value. These values meet the American Society for Testing and Materials (ASTM D6751) standard levels, except for the viscosity value which was 1.14 g·cm−3. PMID:24688372

  1. A Novel Kinetic Method to Measure Apparent Solubility Product of Bulk Human Enamel

    Directory of Open Access Journals (Sweden)

    Linda Hassanali

    2017-09-01

    Full Text Available Introduction: Tooth enamel mineral loss is influenced by its solubility product value, which is fundamental to the understanding of de- and remineralization resulting from a carious or erosive challenge. Published pKsp values for human enamel and hydroxyapatite range from 110 to 126 suggesting a heterogeneous nature of enamel solubility. However, this range of values may also result from the variety of methods used, e.g., some authors reporting values for suspensions of enamel powder and others for bulk enamel. The aim of this study was to develop a method to measure the solubility of bulk human enamel under controlled in vitro conditions simulating demineralization behavior of enamel within the oral environment using scanning microradiography (SMR. SMR was used to monitor real-time changes in enamel demineralization rates at increasing calcium concentrations in a caries simulating demineralization solution until the concentration at which thermodynamic equilibrium between enamel and solution was achieved.Method: 2 mm thick caries free erupted human enamel slabs with the natural buccal surfaces exposed were placed in SMR cells exposed to circulating caries-simulating 2.0 L 0.1 M pH = 4.0 acetic acid, at 25°C. SMR was used to continuously measure in real-time the decrease in mineral mass during the demineralization at 5 different points from on each slab. Demineralization rates were calculated from a linear regression curve of projected mineral mass against demineralization time. Changes in the demineralization rates were monitored following a series of successive increases in calcium (and phosphate at hydroxyapatite stoichiometric ratios of Ca:P 1.67 were added to the demineralizing solution, until demineralization ceased. The pH was maintained constant throughout.Results: Demineralization halted when the calcium concentration was ~30 mM. At higher calcium concentrations, mineral deposition (remineralization occurred. By comparison with results

  2. Environmental sustainability of biobased products: new assessment methods and case studies

    OpenAIRE

    Freitas de Alvarenga, Rodrigo

    2013-01-01

    Certain environmental issues, as climate change and the depletion of fossil fuels, gave support to the renaissance of a biobased economy, where products are to be produced mainly from biomass (so-called biobased products). However, biobased products do not automatically mean environmentally sustainable products. In this sense, a proper evaluation of the environmental impacts of biobased products has to be done, through environmental assessment methodologies that consider the life-cycle perspe...

  3. A New Method for Production of Titanium Dioxide Pigment - Eliminating CO2 Emission

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Zhigang Zak [University of Utah

    2013-11-05

    The objective of this project was to demonstrate the potential of a new process technology to reduce the energy consumption and CO{sub 2} emission from the production of titanium dioxide (TiO{sub 2}) pigment. TiO{sub 2} is one of the most commonly used minerals in the chemical manufacturing industry. It has been commercially processed as a pigment since the early 1900's, and has a wide variety of domestic and industrial applications. TiO{sub 2} pigment is currently produced primarily by the use of the so called chloride process. A key step of the chloride process relies on high temperature carbo-chlorination of TiO{sub 2} bearing raw materials, hence producing large quantities of CO{sub 2}. The new method uses a chemical/metallurgical sequential extraction methodology to produce pigment grade TiO{sub 2} from high-TiO{sub 2} slag. The specific project objectives were to 1) study and prove the scientific validity of the concept, 2) understand the primary chemical reactions and the efficiency of sequential extraction schemes, 3) determine the properties of TiO{sub 2} produced using the technology, and 4) model the energy consumptions and environmental benefits of the technology. These objectives were successfully met and a new process for producing commercial quality TiO{sub 2} pigment was developed and experimentally validated. The process features a unique combination of established metallurgical processes, including alkaline roasting of titania slag followed by leaching, solvent extraction, hydrolysis, and calcination. The caustic, acidic, and organic streams in the process will also be regenerated and reused in the process, greatly reducing environmental waste. The purpose and effect of each of these steps in producing purified TiO{sub 2} is detailed in the report. The levels of impurities in our pigment meet the requirements for commercial pigment, and are nearly equivalent to those of two commercial pigments. Solvent extraction with an amine extractant

  4. In vivo persistent pigment darkening method: proposal of a new standard product for UVA protection factor determination.

    Science.gov (United States)

    Moyal, D; Pissavini, M; Boyer, F; Perier, V; Frêlon, J H

    2007-12-01

    The European Commission (EC) has recommended assessing the level of ultraviolet A (UVA) protection afforded by sunscreen products using the in vivo persistent pigment darkening (PPD) method or other methods giving equivalent results. In this context, the reproducibility of the in vivo PPD method is of importance. To check the validity of the UVA protection factor (UVAPF) tests, the Japanese Cosmetic Industry Association (JCIA) recommends using a standard product (JCIA standard) with an expected UVAPF 3.75 (SD 1.01). However, considering the increase in UVA efficacy of the new sunscreen products available in the market, with UVAPF up to 30, it seemed useful to develop a new standard product to be used when testing products with expected UVAPF > or =10. The PPD method was used in six centres to determine the UVAPF of the two products. Reproducibility of results was also studied by testing two batches of the new product at two different times. There was no statistical difference between the six centres with regard to the JCIA standard. The ring study showed that the mean value of UVAPF (4.3) was higher than that given by JCIA (3.75). These data enable the proposal of a new acceptance range for the JCIA standard product (3.4-5.2) derived from actual results from European laboratories. Whereas this range is different from that proposed by JCIA (2.74-4.76), there is an overlapping of the values. Data on the new standard product show that reproducibility is not influenced by the batches of this product. The mean UVAPF value obtained is 12.1. An acceptance range (9.6-14.6) is proposed for the new standard. Data presented here demonstrate that if an identical protocol is used, reproducible results can be expected and that the PPD method is reproducible and reliable.

  5. Application of computational chemistry methods to obtain thermodynamic data for hydrogen production from liquefied petroleum gas

    Directory of Open Access Journals (Sweden)

    J. A. Sousa

    2013-03-01

    Full Text Available The objective of this study was to estimate thermodynamic data, such as standard enthalpy, entropy and Gibbs free energy changes of reaction and, consequently, chemical equilibrium constants, for a reaction system describing the hydrogen production from Liquefied Petroleum Gas (LPG. The acquisition of those properties was made using computational chemistry methods and the results were compared with experimental data reported in the literature. The reaction system of steam reforming of LPG was reported as a set of seven independent reactions involving the chemical species n-C4H10, C3H8, C2H6, C2H4, CH4, CO2, CO, H2O, H2 and solid carbon. Six computational approaches were used: Density Functional Theory (DFT employing Becke's three parameter hybrid exchange functional, and the Lee-Yang-Parr correlation functional (B3LYP using the 6-31G++(d,p basis set and the composite methods CBS-QB3, Gaussian-1 (G1, Gaussian-2 (G2, Gaussian-3 (G3 and Gaussian-4 (G4. Mole fractions of the system components were also determined between 873.15 and 1173.15 K, at 1 atm and a feed with a stoichiometric amount of water. Results showed that the hybrid functional B3LYP/6-31G++(d,p, G3 and G4 theories were the most appropriated methods to predict the properties of interest. Gaussian-3 and Gaussian-4 theories are expected to be good thermodynamic data predictors and the known efficient prediction of vibrational frequencies by B3LYP is probably the source of the good agreement found in this study. This last methodology is of special interest since it presents low computational cost, which is important when more complex molecular systems are considered.

  6. Determination of methyldibromoglutaronitrile in cosmetic products by high-performance liquid chromatography with electrochemical detection. Method validation

    DEFF Research Database (Denmark)

    Rastogi, Suresh Chandra; Zachariae, Claus; Johansen, Jeanne D

    2004-01-01

    An increased frequency of contact allergy to methyldibromoglutaronitrile (MDBGN), a commonly used preservative in cosmetics and other consumer products, has been reported in recent years. A high-performance liquid chromatography (HPLC) method for the determination of MDBGN in cosmetic products has...... been validated in the present study. The identification is performed by reductive electrochemical detection of the bromine present in the molecule. The method is suitable for compliance testing of cosmetic products as well as for the research to support clinical and epidemiological studies....

  7. Simplified Mashing Efficiency. Novel Method for Optimization of Food Industry Wort Production with the Use of Adjuncts

    Directory of Open Access Journals (Sweden)

    Szwed Łukasz P.

    2014-09-01

    Full Text Available Malt extracts and malt concentrates have a broad range of application in food industry. Those products are obtained by methods similar to brewing worts. The possible reduction of cost can be achieved by application of malt substitutes likewise in brewing industry. As the malt concentrates for food industry do not have to fulfill strict norms for beer production it is possible to produce much cheaper products. It was proved that by means of mathematic optimization it is possible to determine the optimal share of unmalted material for cheap yet effective production of wort.

  8. Methodes de decomposition pour la planification a moyen terme de la production hydroelectrique sous incertitude

    Science.gov (United States)

    Carpentier, Pierre-Luc

    In this thesis, we consider the midterm production planning problem (MTPP) of hydroelectricity generation under uncertainty. The aim of this problem is to manage a set of interconnected hydroelectric reservoirs over several months. We are particularly interested in high dimensional reservoir systems that are operated by large hydroelectricity producers such as Hydro-Quebec. The aim of this thesis is to develop and evaluate different decomposition methods for solving the MTPP under uncertainty. This thesis is divided in three articles. The first article demonstrates the applicability of the progressive hedging algorithm (PHA), a scenario decomposition method, for managing hydroelectric reservoirs with multiannual storage capacity under highly variable operating conditions in Canada. The PHA is a classical stochastic optimization method designed to solve general multistage stochastic programs defined on a scenario tree. This method works by applying an augmented Lagrangian relaxation on non-anticipativity constraints (NACs) of the stochastic program. At each iteration of the PHA, a sequence of subproblems must be solved. Each subproblem corresponds to a deterministic version of the original stochastic program for a particular scenario in the scenario tree. Linear and a quadratic terms must be included in subproblem's objective functions to penalize any violation of NACs. An important limitation of the PHA is due to the fact that the number of subproblems to be solved and the number of penalty terms increase exponentially with the branching level in the tree. This phenomenon can make the application of the PHA particularly difficult when the scenario tree covers several tens of time periods. Another important limitation of the PHA is caused by the fact that the difficulty level of NACs generally increases as the variability of scenarios increases. Consequently, applying the PHA becomes particularly challenging in hydroclimatic regions that are characterized by a high

  9. Selection of suitable propagation method for consistent plantlets production in Stevia rebaudiana (Bertoni)

    Science.gov (United States)

    Khalil, Shahid Akbar; Zamir, Roshan; Ahmad, Nisar

    2014-01-01

    Stevia rebaudiana (Bert.) is an emerging sugar alternative and anti-diabetic plant in Pakistan. That is why people did not know the exact time of propagation. The main objective of the present study was to establish feasible propagation methods for healthy biomass production. In the present study, seed germination, stem cuttings and micropropagation were investigated for higher productivity. Fresh seeds showed better germination (25.51–40%) but lost viability after a few days of storage. In order to improve the germination percentage, seeds were irradiated with 2.5, 5.0, 7.5 and 10 Gy gamma doses. But gamma irradiation did not show any significant change in seed germination. A great variation in survival of stem cutting was observed in each month of 2012. October and November were found the most suitable months for stem cutting survival (60%). In order to enhance survival, stem cuttings were also dipped in different plant growth regulators (PGRs) solution. Only indole butyric acid (IBA; 1000 ppm) treated cutting showed a higher survival (33%) than control (11.1%). Furthermore, simple and feasible indirect regeneration system was established from leaf explants. Best callus induction (84.6%) was observed on MS-medium augmented with 6-benzyladenine (BA) and 2,4-dichlorophenoxyacetic acid (2,4-D; 2.0 mg l−1). For the first time, we obtained the highest number of shoots (106) on a medium containing BA (1.5 mg l−1) and gibberellic acid (GA3; 0.5 mg l−1). Plantlets were successfully acclimatized in plastic pots. The current results preferred micropropagation (85%) over seed germination (25.51–40%) and stem cutting (60%). PMID:25473365

  10. An overview of AmeriFlux data products and methods for data acquisition, processing, and publication

    Science.gov (United States)

    Pastorello, G.; Poindexter, C.; Agarwal, D.; Papale, D.; van Ingen, C.; Torn, M. S.

    2014-12-01

    The AmeriFlux network encompasses independently managed field sites measuring ecosystem carbon, water, and energy fluxes across the Americas. In close coordination with ICOS in Europe, a new set of fluxes data and metadata products is being produced and released at the FLUXNET level, including all AmeriFlux sites. This will enable continued releases of global standardized set of flux data products. In this release, new formats, structures, and ancillary information are being proposed and adopted. This presentation discusses these aspects, detailing current and future solutions. One of the major revisions was to the BADM (Biological, Ancillary, and Disturbance Metadata) protocols. The updates include structure and variable changes to address new developments in data collection related to flux towers and facilitate two-way data sharing. In particular, a new organization of templates is now in place, including changes in templates for biomass, disturbances, instrumentation, soils, and others. New variables and an extensive addition to the vocabularies used to describe BADM templates allow for a more flexible and comprehensible coverage of field sites and the data collection methods and results. Another extensive revision is in the data formats, levels, and versions for fluxes and micrometeorological data. A new selection and revision of data variables and an integrated new definition for data processing levels allow for a more intuitive and flexible notation for the variety of data products. For instance, all variables now include positional information that is tied to BADM instrumentation descriptions. This allows for a better characterization of spatial representativeness of data points, e.g., individual sensors or the tower footprint. Additionally, a new definition for data levels better characterizes the types of processing and transformations applied to the data across different dimensions (e.g., spatial representativeness of a data point, data quality checks

  11. Novel production method of innovative antiangiogenic and antitumor small peptides in Escherichia coli

    Directory of Open Access Journals (Sweden)

    Setrerrahmane S

    2017-11-01

    increased antiangiogenic effect (>75% of the purified products compared with the single molecules. Meanwhile, MTT assay confirmed their enhanced antitumor activity against gastric cancer cell line MGC-803; however, no significant effect was observed on hepatoma HepG2 cells and no cytotoxicity on normal human lens epithelial cell SRA01/04 and human epithelial esophageal cells.Conclusion: Bifunctional molecules with antiangiogenic and antiproliferative effects were obtained by using this technique, which presents an alternative for small peptide production, instead of the conventional chemical method. The increased molecular weight facilitates the peptide expression with a simultaneous improvement in their stability and biological activity. Keywords: innovative drugs, bifunctional peptides, linkers, auto-induction, antiangiogenic, antitumor

  12. Enhanced method of magnetic powder alignment for production of PLP Nd-Fe-B magnets

    Energy Technology Data Exchange (ETDEWEB)

    Popov, A.G. [M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences, Str. S. Kovalevskoy, 18, 620137 Ekaterinburg (Russian Federation); Institute of Natural Sciences and Mathematics, Ural Federal University, Av. Mira, 19, 620002 Ekaterinburg (Russian Federation); Golovnia, O.A., E-mail: golovnya@imp.uran.ru [M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences, Str. S. Kovalevskoy, 18, 620137 Ekaterinburg (Russian Federation); Institute of Natural Sciences and Mathematics, Ural Federal University, Av. Mira, 19, 620002 Ekaterinburg (Russian Federation); Protasov, A.V. [M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences, Str. S. Kovalevskoy, 18, 620137 Ekaterinburg (Russian Federation); Institute of Natural Sciences and Mathematics, Ural Federal University, Av. Mira, 19, 620002 Ekaterinburg (Russian Federation)

    2017-04-15

    It is demonstrated how the high degree of powder alignment in PLP magnets can be achieved by loading the powder into a container placed in a magnetic field of moderate strength. The strip-cast alloy with a composition of 30.00 Nd, 1.95 Dy, 66.42 Fe, 0.99 B, 0.54 Co, 0.1 Ga (wt%) was subjected to hydrogen decrepitation and then milled in a vibratory mill in toluene to an average particle size of 2.9 µm determined by the FSSS method. The powder was compacted in the magnetic field of 0.2 – 1.2 T to the filling density 2.6 – 3.2×10{sup 3} kg/m{sup 3}. It is shown that loading the powder into a container placed in a magnetic field enhances the degree of powder alignment in sintered Nd-Fe-B magnets produced from non-pressed powder. At the filling density less than 3.2×10{sup 3} kg/m{sup 3}, the density of magnets is high but insufficient, because of the formation of magnetostatic chains of particles, which impedes the powder compaction. The simulation by the discrete-element method qualitatively proves that the magnetostatic interaction of the chains of particles that are formed in the course of loading in the magnetic field stimulates a decrease in the density of the sintered magnets and its non-uniform distribution over the sample. As a result of the optimization of the parameters of the alignment and compaction of the powder loaded in a magnetic field, PLP magnets with B{sub r} ≥1.34 T, H{sub c} ≥950 kA/m, (BH){sub max} ≥340 kJ/m{sup 3}, and the degree of alignment exceeding 96% were produced. - Highlights: • The pressless process (PLP) in magnet production is studied. • A new method of the loading of powder in an applied DC magnetic field is suggested. • The method allows achieving higher degree of alignment in moderate magnetic field. • Density of sintered magnets is studied experimentally and via DEM simulation. • Low density is caused by the formation of magnetostatic chains of powder particles.

  13. An effective identification and quantification method for Ginkgo biloba flavonol glycosides with targeted evaluation of adulterated products.

    Science.gov (United States)

    Ma, Yuan-Chun; Mani, Ana; Cai, Yaling; Thomson, Jaclyn; Ma, Jie; Peudru, Flavie; Chen, Sarah; Luo, Mai; Zhang, Junzeng; Chapman, Robert G; Shi, Zhen-Tuo

    2016-04-15

    Ginkgo biloba L. (Ginkgoaceae) leaf extract is one of the most popular herbal products on the market, as it contains flavone glycosides (≥ 24%) and terpene lactones (≥ 6%), which are proposed to have significant physiological effects. Unfortunately, the challenging financial climate has resulted in a natural health product market containing adulterated ginkgo products. 42 ginkgo samples were analyzed to establish an HPLC profile for authentic ginkgo and common ginkgo adulterants, and to develop a method capable of easily detecting adulteration in ginkgo commercial products. In this study an efficient and targeted HPLC analysis method was established that is capable of distinguishing flavonol glycosides and aglycones simultaneously for the evaluation of ginkgo powdered extracts (PEs) and finished products in a single, 13 min run. Thirteen ginkgo leaf samples, fifteen standardized powdered extracts, and fourteen commercially available ginkgo products have been analyzed using this new HPLC method. Chromatograms were compared to six standard reference materials: one flavonol glycoside (rutin), three aglycones (quercetin, kaempferol and isorhamnetin), and two isoflavones (genestin and genistein). The quantitative chromatographic data was interpreted by principal component analysis (PCA), which assisted in the detection of unexpected chromatographic features in various adulterated botanical products. Only three of the commercially available ginkgo finished products tested in this study were determined to be authentic, with flavonol glycoside rutin, and aglycones quercetin, kaempferol, and isorhamnetin found to be common adulterants in the ginkgo powdered extract and finished product samples. Despite evidence of adulteration in most of the samples, each of the samples discussed herein met most of the current pharmacopeial standards. It is therefore critical that a preliminary evaluation be utilized to detect adulteration in commercial ginkgo products, prior to the

  14. 76 FR 11512 - In the Matter of Certain Liquid Crystal Display Devices, Products Containing Same, and Methods...

    Science.gov (United States)

    2011-03-02

    ... COMMISSION In the Matter of Certain Liquid Crystal Display Devices, Products Containing Same, and Methods for Using the Same; Notice of Investigation AGENCY: U.S. International Trade Commission. ACTION: Institution... same, and methods for using the same by reason of infringement of certain claims of U.S. Patent No. 6...

  15. 75 FR 9928 - In the Matter of: Certain Liquid Crystal Display Modules, Products Containing Same, and Methods...

    Science.gov (United States)

    2010-03-04

    ... COMMISSION In the Matter of: Certain Liquid Crystal Display Modules, Products Containing Same, and Methods Using the Same; Notice of Commission Determination to Rescind a Limited Exclusion Order and Cease and... same, and methods for using the same by reason of infringement of certain claims of U.S. Patent Nos. 6...

  16. ANALYTICAL METHOD DEVELOPMENT FOR ALACHLOR ESA AND OTHER ACETANILIDE HERBICIDE DEGRADATION PRODUCTS

    Science.gov (United States)

    In 1998, USEPA published a Drinking Water Contaminant Candidate List (CCL) of 50 chemicals and 10 microorganisms. "Alachlor ESA and other acetanilide herbicide degradation products" is listed on the the 1998 CCL. Acetanilide degradation products are generally more water soluble...

  17. Energy Production Calculations with Field Flow Models and Windspeed Predictions with Statistical Methods

    Science.gov (United States)

    Rüstemoǧlu, Sevinç; Barutçu, Burak; Sibel Menteş, Å.ž.

    2010-05-01

    The continuous usage of fossil fuels as primary energy source is the reason of the emission of CO and powerless economy of the country affected by the great flactuations in the unit price of energy sources. In recent years, developments in wind energy sector and the supporting new renewable energy policies of the countries allow the new wind farm owners and the firms who expect to be an owner to consider and invest on the renewable sources. In this study, the annual production of the turbines with 1.8 kW and 30 kW which are available for Istanbul Technical University in Energy Institute is calculated by Wasp and WindPro Field Flow Models and the wind characteristics of the area are analysed. The meteorological data used in calculation includes the period between 02.March.2000 and 31.May.2004 and is taken from the meteorological mast ( ) in Istanbul Technical University's campus area. The measurement data is taken from 2 m and 10 m heights with hourly means. The topography, roughness classes and shelter effects are defined in the models to make accurate extrapolation to the turbine sites. As an advantage, the region is nearly 3.5 km close to the Istanbul Bosphorous but as it can be seen from the Wasp and WindPro Model Results, the Bosphorous effect is interrupted by the new buildings and hight forestry. The shelter effect of these high buildings have a great influence on the wind flow and decrease the high wind energy potential which is produced by the Bosphorous effect. This study, which determines wind characteristics and expected annual production, is important for this Project Site and therefore gains importance before the construction of wind energy system. However, when the system is operating, developing the energy management skills, forecasting the wind speed and direction will become important. At this point, three statistical models which are Kalman Fitler, AR Model and Neural Networks models are used to determine the success of each method for correct

  18. Evaluation of stainless steel cathodes and a bicarbonate buffer for hydrogen production in microbial electrolysis cells using a new method for measuring gas production

    KAUST Repository

    Ambler, Jack R.

    2011-01-01

    Microbial electrolysis cells (MECs) are often examined for hydrogen production using non-sustainable phosphate buffered solutions (PBS), although carbonate buffers have been shown to work in other bioelectrochemical systems with a platinum (Pt) catalyst. Stainless steel (SS) has been shown to be an effective catalyst for hydrogen evolution in MECs, but it has not been tested with carbonate buffers. We evaluated the combined using of SS cathodes and a bicarbonate buffer (BBS) at the applied voltages of 0.5, 0.7 and 0.9 V using a new inexpensive method for measuring gas production called the gas bag method (GBM). This method achieved an average error of only 5.0% based on adding known volumes of gas to the bag. Using the GBM, hydrogen production with SS and a BBS was 26.6 ± 1.8 mL which compared well to 26.4 ± 2.8 mL using Pt and BBS, and 26.8 ± 2.5 mL with a Pt cathode and PBS. Electrical energy efficiency was highest with a SS cathode and BBS at 159 ± 17%, compared to 126 ± 14% for the Pt cathode and BBS, and 134 ± 17% for a Pt cathode and PBS. The main disadvantage of the SS was a lower gas production rate of 1.1 ± 0.3 m3 H2-m-3 d-1 with BBS and 1.2 ± 0.3 m3 H2-m-3 d -1 with PBS, compared to 1.7 ± 0.4 m3 H 2-m-3 d-1 with Pt and PBS. These results show that the GBM is an effective new method for measuring gas production of anaerobic gas production processes, and that SS and bicarbonate buffers can be used to effectively produce hydrogen in MECs. © 2010 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.

  19. A Product Analysis Method and Its Staging to Develop Redesign Competences

    Science.gov (United States)

    Hansen, Claus Thorp; Lenau, Torben Anker

    2013-01-01

    Most product development work in industrial practice is incremental, i.e., the company has had a product in production and on the market for some time, and now time has come to design an upgraded variant. This type of redesign project requires that the engineering designers have competences to carry through an analysis of the existing product…

  20. Characterization of titanium dioxide nanoparticles in food products: Analytical methods to define nanoparticles

    NARCIS (Netherlands)

    Peters, R.J.B.; Bemmel, G. van; Herrera-Rivera, Z.; Helsper, H.P.F.G.; Marvin, H.J.P.; Weigel, S.; Tromp, P.C.; Oomen, A.G.; Rietveld, A.G.; Bouwmeester, H.

    2014-01-01

    Titanium dioxide (TiO2) is a common food additive used to enhance the white color, brightness, and sometimes flavor of a variety of food products. In this study 7 food grade TiO2 materials (E171), 24 food products, and 3 personal care products were investigated for their TiO 2 content and the

  1. Apparatus and methods for packaging and storing moisture sensitive products in resealable pouches

    DEFF Research Database (Denmark)

    2006-01-01

    at least one segment that extend along the pouch length. By configuring the product in this way, it can be efficiently packaged, stored, and dispensed. Other embodiments of the invention include closure systems that permit sealing the pouch opening when product is not being dispensed and substantially...... sealing the pouch around the product during dispensing....

  2. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  3. Biodiesel production using alkali earth metal oxides catalysts synthesized by sol-gel method

    Directory of Open Access Journals (Sweden)

    Majid Mohadesi

    2014-03-01

    Full Text Available Biodiesel fuel is considered as an alternative to diesel fuel. This fuel is produced through transesterification reactions of vegetable oils or animal fat by alcohols in the presence of different catalysts. Recent studies on this process have shown that, basic heterogeneous catalysts have a higher performance than other catalysts. In this study different alkali earth metal oxides (CaO, MgO and BaO doped SiO2 were used as catalyst for the biodiesel production process. These catalysts were synthesis by using the sol-gel method. A transesterification reaction was studied after 8h by mixing corn oil, methanol (methanol to oil molar ratio of 16:1, and 6 wt. % catalyst (based on oil at 60oC and 600rpm. Catalyst loading was studied for different catalysts ranging in amounts from 40, 60 to 80%. The purity and yield of the produced biodiesel for 60% CaO/SiO2 was higher than other catalysts and at 97.3% and 82.1%, respectively.

  4. An investigation into the Traditional Method of Production of Omani Sarooj

    Directory of Open Access Journals (Sweden)

    A. W. Hago

    1999-12-01

    Full Text Available In the past, sarooj had been used as the basic cementing material with which the A flaj system (the irrigation system used in Oman was built. Worldwide, materials like sarooj existed and were known for their good impermeability and long durability. For this reason it was extensively used in hydraulic structures. Even in this century and with the ready availability of Portland cements, special plants were erected to produce materials like sarooj for major dams in the world. In the process of hydration In sarooj-lime mixes or in sarooj-cement mixes free lime is released which causes distress through the expansion of the mortar if allowed to accumulate. If free lime is stabilized within the structure of the mortar. it imparts additional strength and durability to it. The mortar becomes less permeable to water, which increases its resistance to wearhering. The stabilization is possible through the presence of a reactive silica/alumina in the mix so that it reacts with the free lime to form calcium silicates/aluminates. The properties of sarooj depend largely on the type of the raw material and the calcination parameters. This paper describes this material, its method of production and uses, and highlights research currently conducted to improve its properties.

  5. Efficient protein production method for NMR using soluble protein tags with cold shock expression vector

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Kokoro [Fujifilm Corporation, Analysis Technology Center (Japan); Kojima, Chojiro, E-mail: kojima@protein.osaka-u.ac.j [Nara Institute of Science and Technology (NAIST), Graduate School of Biological Sciences (Japan)

    2010-11-15

    The E. coli protein expression system is one of the most useful methods employed for NMR sample preparation. However, the production of some recombinant proteins in E. coli is often hampered by difficulties such as low expression level and low solubility. To address these problems, a modified cold-shock expression system containing a glutathione S-transferase (GST) tag, the pCold-GST system, was investigated. The pCold-GST system successfully expressed 9 out of 10 proteins that otherwise could not be expressed using a conventional E. coli expression system. Here, we applied the pCold-GST system to 84 proteins and 78 proteins were successfully expressed in the soluble fraction. Three other cold-shock expression systems containing a maltose binding protein tag (pCold-MBP), protein G B1 domain tag (pCold-GB1) or thioredoxin tag (pCold-Trx) were also developed to improve the yield. Additionally, we show that a C-terminal proline tag, which is invisible in {sup 1}H-{sup 15}N HSQC spectra, inhibits protein degradation and increases the final yield of unstable proteins. The purified proteins were amenable to NMR analyses. These data suggest that pCold expression systems combined with soluble protein tags can be utilized to improve the expression and purification of various proteins for NMR analysis.

  6. A new method for the production of sterile colonies of Lucilia sericata.

    Science.gov (United States)

    Gasz, N E; Harvey, M L

    2017-09-01

    Maggot debridement therapy (MDT) refers to the use of blowfly larvae to clean or debride an infected wound. Most commonly, larvae of Lucilia sericata (Meigen) (Diptera: Calliphoridae) are used, and are sterilized prior to use to ensure no further bacterial infections are introduced during treatment. Current methods sterilize eggs from laboratory-reared blowfly colonies, after which sterile early second instar maggots can be provided to hospitals for use in treatment. Maggots not required for treatment are used for colony regeneration, in which sterility is not maintained. The ability to maintain sterility beyond this would allow further research into fly-bacteria interactions and the effects of different bacteria on the blowfly lifecycle. This study aimed to produce a colony of sterile adults, using current egg sterilization practice, but maintaining sterility through to pupation and emergence. The production of a sterile colony allows further research into the impact of bacteria on fly development and survival. Eggs were placed on a sterile food source within autoclaved plant tissue culture containers to allow growth under sterile conditions. Nutrient agar plating of sterilized and non-sterilized eggs, larvae and adults (post-emergence), as well as the pupation medium and feed source in nutrient broth confirmed the aerobic sterility of all samples involved. The lifecycle of L. sericata was successfully completed through pupation to emergence with no effects on lifespan or oviposition by the newly emerged, sterile adult colony. © 2017 The Royal Entomological Society.

  7. Continuous production of carbon nanotubes and diamond films by swirled floating catalyst chemical vapour deposition method

    Directory of Open Access Journals (Sweden)

    S.E. Iyuke

    2010-01-01

    Full Text Available Various techniques for the synthesis of carbon nanotubes (CNTs are being developed to meet an increasing demand as a result of their versatile applications. Swirled floating catalyst chemical vapour deposition (SFCCVD is one of these techniques. This method was used to synthesise CNTs on a continuous basis using acetylene gas as a carbon source, ferrocene dissolved in xylene as a catalyst precursor, and both hydrogen and argon as carrier gases. Transmission electron microscopy analyses revealed that a mixture of single and multi-wall carbon nanotubes and other carbon nanomaterials were produced within the pyrolytic temperature range of 900–1 100°C and acetylene flow rate range of 118–370 ml min–1. Image comparison of raw and purified products showed that low contents of iron particles and amorphous carbon were contained in the synthesised carbon nanotubes. Diamond films were produced at high ferrocene concentration, hydrogen flow rate and pyrolysis temperatures, while carbon nanoballs were formed and attached to the surface of theCNTs at low ferrocene content and low pyrolysis temperature.

  8. Real-Time PCR Methods for Detection of Foodborne Bacterial Pathogens in Meat and Meat Products

    Science.gov (United States)

    Hernández, Marta; Hansen, Flemming; Cook, Nigel; Rodríguez-Lázaro, David

    As a consequence of the potential hazards posed by the presence of microbial pathogens, microbiological quality control programmes are being increasingly applied throughout the meat production chain in order to minimize the risk of infection for the consumer. Classical microbiological methods to detect the presence of microorganisms, involving enrichment and isolation of presumptive colonies of bacteria on solid media, and final confirmation by biochemical and/or serological identification, although remaining the approach of choice in routine analytical laboratories, can be laborious and time consuming. The adoption of molecular techniques in microbial diagnostics has become a promising alternative approach, as they possess inherent advantages such as shorter time to results, excellent detection limits, specificity and potential for automation. Several molecular detection techniques have been devised in the last two decades, such as nucleic acid sequence-based amplification (NASBA) (Cook, 2003; Rodriguez-Lazaro, Hernandez, D’Agostino, & Cook, 2006) and loop-mediated isothermal amplification (Notomi et al., 2000), but the one which has undergone the most extensive development as a practical food analytical tool is the polymerase chain reaction (PCR) (Hoorfar & Cook, 2003; Malorny, Tassios, et al., 2003).

  9. Improving the Performance of Reprocessed ABS Products from the Manufacturing Perspective via the Taguchi Method

    Directory of Open Access Journals (Sweden)

    Ng Chin Fei

    2013-01-01

    Full Text Available Additives are costly and can have negative environmental effects. Thus, searching for other alternatives to improve recycling plastics without using additives is necessary. This study aims to improve the hoop tensile strength, elongation at break, and shrinkage of the ring stopper made from an acrylonitrile butadiene styrene blend comprising 40% recyclates through the optimization of processing parameters using the Taguchi method. By adopting the L9 Taguchi orthogonal array, four controllable factors each at three levels are tested to determine the optimal combination of factors and levels in the injection moulding process. Considering the multiple quality characteristics involved in this study, we investigate the effects of processing parameters on hoop tensile strength, elongation at break, and shrinkage of the ring stopper both separately and simultaneously because changing a parameter can result in the improvement or deterioration of each quality response and of the overall product performance. The results revealed that the performance of an injection-moulded ring stopper under the optimal process conditions is equivalent or slightly better than that of the part produced from virgin resin. The performance of recycled plastics can be effectively enhanced to levels comparable with virgin resins using the Taguchi optimization approach.

  10. A method for the production of composite scintillators for dosimetry in diagnostic radiology

    Energy Technology Data Exchange (ETDEWEB)

    Nowotny, R; Taubeck, A [Centre for Biomedical Engineering and Physics, Medical University Vienna, AKH-4L, A-1090 Vienna (Austria)], E-mail: robert.nowotny@meduniwien.ac.at

    2009-03-21

    Plastic scintillators are used in the dosimetry of photons in radiotherapy. Their use in diagnostic radiology is affected by the drop in response at lower photon energies due to inadequate composition (effective atomic number) and chemical quenching. To compensate for this deficiency, a method for the production of composite polystyrene-based plastic scintillators was devised allowing the incorporation of inorganic scintillation powder. Disks of 10 mm diameter and 1 mm thickness optimized for a flat energy response referred to kerma in air were produced using CaWO{sub 4}, ZnS:Ag and CaF{sub 2}:Eu as additives. In an HVL range of 2.26-13.69 mmAl, the response was within an interval of {+-}2.8% for CaF{sub 2}:Eu as additive, {+-}3.2% for CaWO{sub 4} and {+-}10.9% for ZnS:Ag, respectively. The response of a commercial plastic scintillator (BC470) stays within {+-}13.6%. The temperature dependence of the composite scintillator using CaF{sub 2}:Eu is lowest with a variation of +3.7% to -3.6% in an interval from 5 deg. C to 45 deg. C. The deficiency in photon absorption at lower energies due to the effective atomic number is reduced but not fully compensated by the additive scintillators. The optimized concentrations were established for the scintillator dimensions used.

  11. A method for the production of composite scintillators for dosimetry in diagnostic radiology.

    Science.gov (United States)

    Nowotny, R; Taubeck, A

    2009-03-21

    Plastic scintillators are used in the dosimetry of photons in radiotherapy. Their use in diagnostic radiology is affected by the drop in response at lower photon energies due to inadequate composition (effective atomic number) and chemical quenching. To compensate for this deficiency, a method for the production of composite polystyrene-based plastic scintillators was devised allowing the incorporation of inorganic scintillation powder. Disks of 10 mm diameter and 1 mm thickness optimized for a flat energy response referred to kerma in air were produced using CaWO(4), ZnS:Ag and CaF(2):Eu as additives. In an HVL range of 2.26-13.69 mmAl, the response was within an interval of +/-2.8% for CaF(2):Eu as additive, +/-3.2% for CaWO(4) and +/-10.9% for ZnS:Ag, respectively. The response of a commercial plastic scintillator (BC470) stays within +/-13.6%. The temperature dependence of the composite scintillator using CaF(2):Eu is lowest with a variation of +3.7% to -3.6% in an interval from 5 degrees C to 45 degrees C. The deficiency in photon absorption at lower energies due to the effective atomic number is reduced but not fully compensated by the additive scintillators. The optimized concentrations were established for the scintillator dimensions used.

  12. A high productivity and speedy synthesis process for copper nanowires via an ethylenediamine-mediated method

    Science.gov (United States)

    Duong, Thanh-Hung; Kim, Hyun-Chul

    2017-03-01

    Generally, there are two well-known synthetic approaches for copper nanowires (Cu NWs): ethylenediamine (EDA)-mediated synthesis and alkylamine-mediated synthesis. The alkylamine-mediated synthesis produces very high ratio nanowires but requires a special environment and long reaction times, while the EDA-mediated synthesis can be carried out under normal conditions and requires from 30 min to 1 h. However, the Cu NWs produced by this method have an average aspect ratio lower than 500 and are produced in low yield. In this paper, we present a modified EDA-mediated synthesis to improve the yield and reduce the synthesis time. In previous reported EDA-mediated synthesis, sodium hydroxide (NaOH) was used as a pH adjusting element and the reaction was performed at high temperature. By replacing NaOH with potassium hydroxide (KOH) and cooling down the temperature of reaction to room temperature, the synthesis time was reduced to 15 min as well as the productivity of high aspect ratio Cu NWs was increased notably to 80%. Furthermore, the transparent electrodes which were fabricated based on the as-synthesized Cu NWs, exhibited high performance, such as 23.5 Ω/sq of sheet resistance and 81% of transmittance at λ = 550 nm.

  13. Micro product development methods - how do we focus on the right issues?

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; De Grave, Arnaud; Bissacco, Giuliano

    2005-01-01

    is to focus on the right issues for each required part of the design steps and have the available knowledge and technologies. To that extent, both a technology pushed approach and a product/customer driven approach have to be used in order to conduct to a level of knowledge which can lead to actual production...... and to bring up a line of future technology research. An analysis of the differences and similarities between macro and micro/nano in topics such as product design, industrial organization, etc. is conducted. The general discussion is supported by case studies of both down-scaled products and products only...

  14. Optimization, validation and application of UV-Vis spectrophotometric-colorimetric methods for determination of trimethoprim in different medicinal products

    OpenAIRE

    Goran Stojković; Elizabeta Dimitrieska-Stojković; Marija Soklevska; Romel Velev

    2016-01-01

    Two simple, sensitive, selective, precise, and accurate methods for determination of trimethoprim in different sulfonamide formulations intended for use in human and veterinary medicine were optimized and validated. The methods are based on the trimethoprim reaction with bromcresol green (BCG) and 2,4-dinitro-1-fluorobenzene (DNFB). As extraction solvents we used 10 % N,N-dimethylacetamide in methanol and acetone for both methods, respectively. The colored products are quantified applying vis...

  15. Development of a new method for determination of exopolysaccharide quantity in fermented milk products and its application in technology of kefir production.

    Science.gov (United States)

    Enikeev, Ruslan

    2012-10-15

    An easy-to-use method for quantitative analysis of bacterial exopolysaccharides (EPS) was developed. The acid treatment was resultant in removing proteins and lactose and allowed to avoid long-term operation as dialysis. It was shown that, as opposed to anthron and phenol-sulphuric acid methods, reducing sugars method after EPS hydrolysis with glucose as standard provided reliable results, no matter to the EPS monosaccharide composition. EPS quantity in kefir of different brands was varied greatly, approximately at 50-200 mg/l, showing potential to enhance kefiran production by alteration of technological process. The temperature optimum for EPS production by kefir grains and kefir starter was about 30 °C, while the rise of temperature increased soluble EPS in culturing media by means of extraction from kefir grain body. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Evaluation of different media and methods of cultivation on the production and viability of entomopathogenic fungi, Verticillium lecanii (Zimm.) Viegas.

    Science.gov (United States)

    Derakhshan, Ali; Rabindra, R J; Ramanujam, B; Rahimi, Mehdi

    2008-06-01

    For mass production of V. lecanii, three types of cultivation methods including liquid, solid and diphasic production systems were investigated. In the liquid state of production, six media were tested in stationary culture conditions. Among the six media tested, Molasses Yeast Broth (MYB) supported maximum sporulation (8.33 x 10(8) spores mL(-1)) and biomass production (746 mg/100 mL). In the MYB, 4% molasses concentration was found to produce highest spore count (8.56 x 10(8) spores mL(-1)) and biomass (776 mg/100 mL) followed by 5 and 6% molasses. Among the six solid substrates tested, rice grains supported highest spore production (1.14 g/100 g). In diphasic state of production, combination of MYB and rice grains produced the greatest amount of spores, (1.70 g/100 g). Results of this study indicated that diphasic method using MYB as liquid medium and rice as solid substrate are the best method and media for mass production of V1-7 isolate of V. lecanii.

  17. A Consistent Radar Altimetry Dataset for Major World Rivers: Extraction Methods and Preliminary Data Products

    Science.gov (United States)

    Coss, S. P.; Durand, M. T.; Tuozzolo, S.; Yi, Y.; Jia, Y.; Guo, Q.; Shum, C. K.

    2015-12-01

    Our group has made several efforts to develop the systematics for processing multiple satellite mission inland altimetry data with the purpose of creating a pre-SWOT climate data record of world's rivers greater than 900m in width. The project is a component of a NASA MEaSUREs (Making Earth System Data Records for Use in Research Environments) project undertaken by UCLA, Princeton U., NASA/GSFC and Ohio State Univ. The first method developed allows for the identification of measurements that represent the target river through height filtering and is based on USGS flow data from 105 gauges on rivers with watersheds over 20,000 km2. Proximal topographic variations led to some contamination of the radar returns. We were able to identify them using the previously mentioned height filter, and correlated their frequency with near-river topographic indices. Significant efforts have also been made to detect river ice using only radar backscatter. Over 631 Landsat images were processed and given an ice cover designation then compared with measured backscatter profiles; demonstrating that isolating a one- to-one relationship between ice and backscatter will be challenging. An additional focus of the group has been automation of detecting altimeter/river intersections as well as the creation of "virtual stations" or masks for data extraction at those locations. Using RivWidth parameters to generate polygons and a raster proximity based intersection detection methods have both shown promising results for automation of this process. This project will soon be producing validated climate data records in the form of geocentric river height changes, both in terms of scale of the study area and access to previously unmonitored regions. Once established, these methods will also be applicable to the study of future satellite cycles. Preliminary river height change data products have been produced for the Mississippi, St Lawrence, Yukon, Mackenzie, and part of the Ganges

  18. Ultra-HPLC method for quality and adulterant assessment of steviol glycosides sweeteners - Stevia rebaudiana and stevia products.

    Science.gov (United States)

    Wang, Yan-Hong; Avula, Bharathi; Tang, Wenzhao; Wang, Mei; Elsohly, Mahmoud A; Khan, Ikhlas A

    2015-01-01

    Stevia products are advertised as a zero-calorie sweetener. Glucose should not be an intrinsic component of this product, but it has been identified from some of stevia products in a preliminary study. An UHPLC-UV method was developed for the quantitative determination of glucose from stevia products. After stevia products reacted with 1-phenyl-3-methyl-5-pyrazolone (PMP), PMP derivatives were analysed and glucose was found in seven out of 35 products in the range 0.3-91.5% (w/w). Two products, SPR-12 and SPR-27, showed remarkable amounts of glucose at 61.6% and 91.5%, respectively. In addition, an UHPLC-UV-evaporative light-scattering detector (ELSD) method was developed for the quantitative determination of rebaudioside A, stevioside, rebaudioside D, dulcoside A and steviolbioside from Stevia rebaudiana and related products. In a 12 min run, five steviol glycosides were baseline-separated. ELSD and ultraviolet (UV) detections showed comparable results. The LC methods were validated for linearity, repeatability, accuracy, limits of detection (LOD) and limits of quantification (LOQ). For steviol glycosides, the LODs and LOQs were found to be less than 10 and 30 μg ml(-1), respectively. The RSD for intra- and inter-day analyses was less than 2.5%, and the recovery was 90-94%. For PMP derivative of glucose, the LOD and LOQ were 0.01 and 0.05 μg ml(-1), respectively. Repeatability (RSD) was less than 2.6%; recovery was 98.6-101.7%. The methods are useful for the identification, quality assurance, and adulterant assessment of S. rebaudiana and steviol glycosides sweeteners (stevia products).

  19. The Use of Modelling Methods for Product Configuration in Industrial Applications

    DEFF Research Database (Denmark)

    Hvam, Lars; Bonev, Martin; Haug, Anders

    2014-01-01

    reported. This article investigates the challenge on how industrial companies model their product CSs. The study is based on interviews of 18 industrial companies using CSs for configuring customer-tailored products. It investigates the relationship between using a structured modelling technique......Developing product configuration system (CS) requires extracting and representing domain expert knowledge in appropriate product models. As acknowledged by researchers, this is often one of the most challenging activities in configuration projects, where only little empirical insights have yet been...... for modelling product families relative to less or no formal approaches. Furthermore, the study explores the specific characteristics of configuration set-ups with respect to size and complexity and their effect on product variant management and availability of product knowledge in organizations. The results...

  20. Method to assess the carbon footprint at product level in the dairy industry

    DEFF Research Database (Denmark)

    Flysjö, Anna Maria; Thrane, Mikkel; Hermansen, John Erik

    2014-01-01

    A model to calculate the farm-to-customer carbon footprint (CF) for different dairy product groups is presented. As the largest share of the CF of dairy products occurs at farm level, it is decisive how the emissions from raw milk production are allocated between different products. Impacts...... associated with raw milk are allocated based on a weighted fat and protein content (1:1.4). Data from the dairy company Arla Foods give 1.1, 8.1, 6.5, 7.4 and 1.2 kg carbon dioxide equivalents per kg of fresh dairy product, butter and butter blend, cheese, milk powder and whey based product, and other...